summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath11k
AgeCommit message (Collapse)Author
2024-02-15wifi: ath11k: support 2 station interfacesCarl Huang
Add hardware parameter support_dual_stations to indicate whether 2 station interfaces are supported. For chips which support this feature, limit total number of AP interface and mesh point to 1. The max interfaces are 3 for such chips. The chips affected are: QCA6390 hw2.0 WCN6855 hw2.0 WCN6855 hw2.1 Other chips are not affected. For affected chips, remove radar_detect_widths because now num_different_channels is set to 2. radar_detect_widths can be set only when num_different_channels is 1, see mac80211 function wiphy_verify_combinations for details. This means that in affectected chips DFS cannot be enabled in AP mode. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20230714023801.2621802-2-quic_cjhuang@quicinc.com
2024-02-14wifi: ath11k: Remove scan_flags union from struct scan_req_paramsNicolas Escande
Now that we do not use scan_flags directly with WMI_SCAN_XXX macros anymore but only the bitfield scan_f_xxx, lets remove the scan_flags & the underlying union. This will prevent further problems as some entries in the scan_f_xxx bitfield don't match their corresponding WMI_SCAN_XXX flags as seen in [1] [1] https://lore.kernel.org/all/20231127180559.1696041-1-nico.escande@gmail.com/ Signed-off-by: Nicolas Escande <nico.escande@gmail.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240209113536.266822-3-nico.escande@gmail.com
2024-02-14wifi: ath11k: Do not directly use scan_flags in struct scan_req_paramsNicolas Escande
As discussed in [1] lets not use WMI_SCAN_XXX defines in combination with scan_flags directly when setting scan params in struct scan_req_params but use the underlying bitfield. This bitfield is then converted to WMI_SCAN_XXX when filling the WMI command to send to the firmware. [1] https://lore.kernel.org/all/871qae51wx.fsf@kernel.org/ Tested-on: QCN9074 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Nicolas Escande <nico.escande@gmail.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240209113536.266822-2-nico.escande@gmail.com
2024-02-12wifi: mac80211: remove gfp parameter from ieee80211_obss_color_collision_notifyLorenzo Bianconi
Get rid of gfp parameter from ieee80211_obss_color_collision_notify since it is no longer used. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://msgid.link/f91e1c78896408ac556586ba8c99e4e389aeba02.1707389901.git.lorenzo@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08wifi: mac80211: add support to call csa_finish on a linkAditya Kumar Singh
Currently ieee80211_csa_finish() function finalizes CSA by scheduling a finalizing worker using the deflink. With MLO, there is a need to do it on a given link basis. Pass link ID of the link on which CSA needs to be finalized. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://msgid.link/20240130140918.1172387-6-quic_adisi@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08wifi: mac80211: update beacon counters per link basisAditya Kumar Singh
Currently, function to update beacon counter uses deflink to fetch the beacon and then update the counter. However, with MLO, there is a need to update the counter for the beacon in a particular link. Add support to use link_id in order to fetch the beacon from a particular link data during beacon update counter. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://msgid.link/20240130140918.1172387-3-quic_adisi@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-07wifi: ath11k: Really consistently use ath11k_vif_to_arvif()Jeff Johnson
Commit 9476cda44c13 ("wifi: ath11k: Consistently use ath11k_vif_to_arvif()") previously replaced all open coding of the ath11k_vif_to_arvif() functionality. Subsequently two more instances of open coding were introduced, one in commit 92425f788fee ("wifi: ath11k: fill parameters for vdev set tpc power WMI command") and one in commit 6f4e235be655 ("wifi: ath11k: add parse of transmit power envelope element"), so fix those as well. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240205-ath11k_vif_to_arvif-v1-1-7c41313c8318@quicinc.com
2024-02-05wifi: ath11k: initialize eirp_power before useBaochen Qiang
Currently, at the end of ath11k_mac_fill_reg_tpc_info(), the reg_tpc_info struct is populated, including the following: reg_tpc_info->is_psd_power = is_psd_power; reg_tpc_info->eirp_power = eirp_power; Kernel test robot complains on uninitialized symbol: drivers/net/wireless/ath/ath11k/mac.c:7949 ath11k_mac_fill_reg_tpc_info() error: uninitialized symbol 'eirp_power'. This is because there are some code paths that never set eirp_power, so the assignment of reg_tpc_info->eirp_power can come from an uninitialized variable. Functionally this is OK since the eirp_power only has meaning when is_psd_power is true, and all code paths which set is_psd_power to true also set eirp_power. However, to keep the robot happy, always initialize eirp_power before use. Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Fixes: 92425f788fee ("wifi: ath11k: fill parameters for vdev set tpc power WMI command") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202401311243.NyXwWZxP-lkp@intel.com/ Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240202024011.11341-1-quic_bqiang@quicinc.com
2024-02-05wifi: ath11k: initialize rx_mcs_80 and rx_mcs_160 before useBaochen Qiang
Currently in ath11k_peer_assoc_h_he() rx_mcs_80 and rx_mcs_160 are used to calculate max_nss, see if (support_160) max_nss = min(rx_mcs_80, rx_mcs_160); else max_nss = rx_mcs_80; Kernel test robot complains on uninitialized symbols: drivers/net/wireless/ath/ath11k/mac.c:2321 ath11k_peer_assoc_h_he() error: uninitialized symbol 'rx_mcs_80'. drivers/net/wireless/ath/ath11k/mac.c:2321 ath11k_peer_assoc_h_he() error: uninitialized symbol 'rx_mcs_160'. drivers/net/wireless/ath/ath11k/mac.c:2323 ath11k_peer_assoc_h_he() error: uninitialized symbol 'rx_mcs_80'. This is because there are some code paths that never set them, so the assignment of max_nss can come from uninitialized variables. This could result in some unknown issues since a wrong peer_nss might be passed to firmware. Change to initialize them to an invalid value at the beginning. This makes sense because even max_nss gets an invalid value, due to either or both of them being invalid, we can get an valid peer_nss with following guard: arg->peer_nss = min(sta->deflink.rx_nss, max_nss) Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Fixes: 3db26ecf7114 ("ath11k: calculate the correct NSS of peer for HE capabilities") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202401311243.NyXwWZxP-lkp@intel.com/ Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240202023547.11141-1-quic_bqiang@quicinc.com
2024-02-02wifi: ath11k: change to move WMI_VDEV_PARAM_SET_HEMU_MODE before ↵Wen Gong
WMI_PEER_ASSOC_CMDID Currently when connecting to an AP with 11AX-HE phy mode, host sends WMI_VDEV_PARAM_SET_HEMU_MODE parameter to firmware after WMI_PEER_ASSOC_CMDID command. This results in TXBF not working, because firmware calculates TXBF values while handling WMI_PEER_ASSOC_CMDID, however at that time WMI_VDEV_PARAM_SET_HEMU_MODE has not been sent yet. See below log: AP sends "VHT/HE/EHT NDP Announcement" to station, and station sends "Action no Ack" of category code HE to AP, the "Nc Index" and "Codebook Information" are wrong: Issued action: IEEE 802.11 Action No Ack, Flags: ........ IEEE 802.11 wireless LAN Fixed parameters Category code: HE (30) HE Action: HE Compressed Beamforming And CQI (0) Total length: 152 HE MIMO Control: 0x0004008018 .... .... .... .... .... .... .... .... .... .000 = Nc Index: 1 Column (0) .... .... .... .... .... .... .... ..0. .... .... = Codebook Information: 0 Change to send WMI_VDEV_PARAM_SET_HEMU_MODE before WMI_PEER_ASSOC_CMDID, then firmware will calculate the TXBF values with valid parameters instead of empty values. TXBF works well and throughput performance is improved from 80 Mbps to 130 Mbps with this patch. Good action after this patch: IEEE 802.11 Action No Ack, Flags: ........ IEEE 802.11 wireless LAN Fixed parameters Category code: HE (30) HE Action: HE Compressed Beamforming And CQI (0) Total length: 409 HE MIMO Control: 0x0004008219 .... .... .... .... .... .... .... .... .... .001 = Nc Index: 2 Columns (1) .... .... .... .... .... .... .... ..1. .... .... = Codebook Information: 1 This change applies to all chipsets. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Fixes: 38dfe775d0ab ("wifi: ath11k: push MU-MIMO params from hostapd to hardware") Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240131021832.17298-1-quic_bqiang@quicinc.com
2024-01-31Merge tag 'ath-next-20240130' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath ath.git patches for v6.9 We have new features for both ath11k and ath12k. ath12k is now under heavy refactoring in preparation for MLO support. Major changes: ath12k * refactoring in preparation for Multi-Link Operation (MLO) support * 1024 Block Ack window size support * provide firmware wmi logs via a trace event ath11k * 36 bit DMA mask support * support 6 GHz station power modes: Low Power Indoor (LPI), Standard Power) SP and Very Low Power (VLP)
2024-01-25wifi: ath11k: fix connection failure due to unexpected peer deleteBaochen Qiang
Currently ath11k_mac_op_unassign_vif_chanctx() deletes peer but ath11k_mac_op_assign_vif_chanctx() doesn't create it. This results in connection failure if MAC80211 calls drv_unassign_vif_chanctx() and drv_assign_vif_chanctx() during AUTH and ASSOC, see below log: [ 102.372431] wlan0: authenticated [ 102.372585] ath11k_pci 0000:01:00.0: wlan0: disabling HT/VHT/HE as WMM/QoS is not supported by the AP [ 102.372593] ath11k_pci 0000:01:00.0: mac chanctx unassign ptr ffff895084638598 vdev_id 0 [ 102.372808] ath11k_pci 0000:01:00.0: WMI vdev stop id 0x0 [ 102.383114] ath11k_pci 0000:01:00.0: vdev stopped for vdev id 0 [ 102.384689] ath11k_pci 0000:01:00.0: WMI peer delete vdev_id 0 peer_addr 20:e5:2a:21:c4:51 [ 102.396676] ath11k_pci 0000:01:00.0: htt peer unmap vdev 0 peer 20:e5:2a:21:c4:51 id 3 [ 102.396711] ath11k_pci 0000:01:00.0: peer delete resp for vdev id 0 addr 20:e5:2a:21:c4:51 [ 102.396722] ath11k_pci 0000:01:00.0: mac removed peer 20:e5:2a:21:c4:51 vdev 0 after vdev stop [ 102.396780] ath11k_pci 0000:01:00.0: mac chanctx assign ptr ffff895084639c18 vdev_id 0 [ 102.400628] wlan0: associate with 20:e5:2a:21:c4:51 (try 1/3) [ 102.508864] wlan0: associate with 20:e5:2a:21:c4:51 (try 2/3) [ 102.612815] wlan0: associate with 20:e5:2a:21:c4:51 (try 3/3) [ 102.720846] wlan0: association with 20:e5:2a:21:c4:51 timed out The peer delete logic in ath11k_mac_op_unassign_vif_chanctx() is introduced by commit b4a0f54156ac ("ath11k: move peer delete after vdev stop of station for QCA6390 and WCN6855") to fix firmware crash issue caused by unexpected vdev stop/peer delete sequence. Actually for a STA interface peer should be deleted in ath11k_mac_op_sta_state() when STA's state changes from IEEE80211_STA_NONE to IEEE80211_STA_NOTEXIST, which also coincides with current peer creation design that peer is created during IEEE80211_STA_NOTEXIST -> IEEE80211_STA_NONE transition. So move peer delete back to ath11k_mac_op_sta_state(), also stop vdev before deleting peer to fix the firmware crash issue mentioned there. In this way the connection failure mentioned here is also fixed. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Fixes: b4a0f54156ac ("ath11k: move peer delete after vdev stop of station for QCA6390 and WCN6855") Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240123025700.2929-5-quic_bqiang@quicinc.com
2024-01-25wifi: ath11k: avoid forward declaration of ath11k_mac_start_vdev_delay()Baochen Qiang
Currently ath11k_mac_start_vdev_delay() needs a forward declaration because it is defined after where it is called. Avoid this by re-arranging ath11k_mac_station_add() and ath11k_mac_op_sta_state(). No functional changes. Compile tested only. Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240123025700.2929-4-quic_bqiang@quicinc.com
2024-01-25wifi: ath11k: rename ath11k_start_vdev_delay()Baochen Qiang
Rename ath11k_start_vdev_delay() as ath11k_mac_start_vdev_delay() to follow naming convention. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240123025700.2929-3-quic_bqiang@quicinc.com
2024-01-25wifi: ath11k: remove invalid peer create logicBaochen Qiang
In ath11k_mac_op_assign_vif_chanctx(), there is a logic to create peer using ar->mac_addr for a STA vdev. This is invalid because a STA vdev should have a peer created using AP's MAC address. Besides, if we run into that logic, it means a peer has already been created earlier, we should not create it again. So remove it. This is found during code review. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240123025700.2929-2-quic_bqiang@quicinc.com
2024-01-25wifi: ath11k: enable 36 bit mask for stream DMABaochen Qiang
Currently 32 bit DMA mask is used, telling kernel to get us an DMA address under 4GB when mapping a buffer. This results in a very high CPU overhead in the case where IOMMU is disabled and more than 4GB system memory is installed. The reason is, with more than 4GB memory installed, kernel is likely to allocate a buffer whose physical address is above 4GB. While with IOMMU disabled, kernel has to involve SWIOTLB to map/unmap that buffer, which consumes lots of CPU cycles. We did hit an issue caused by the reason mentioned above: in a system that disables IOMMU and gets 8GB memory installed, a total of 40.5% CPU usage is observed in throughput test. CPU profiling shows nearly 60% of CPU cycles are consumed by SWIOTLB. By enabling 36 bit DMA mask, we can bypass SWIOTLB for any buffer whose physical address is below 64GB. There are two types of DMA mask within struct device, named dma_mask and coherent_dma_mask. Here we only enable 36 bit for dma_mask, because firmware crashes if coherent_dma_mask is also enabled, due to some unknown hardware limitations. This is acceptable because coherent_dma_mask is used for mapping a consistent DMA buffer, which generally does not happen in a hot path. With this change, the total CPU usage mentioned in above issue drops to 18.9%. Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240123015201.28939-1-quic_bqiang@quicinc.com
2024-01-23Merge tag 'wireless-2024-01-22' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Kalle Valo says: ==================== wireless fixes for v6.8-rc2 The most visible fix here is the ath11k crash fix which was introduced in v6.7. We also have a fix for iwlwifi memory corruption and few smaller fixes in the stack. * tag 'wireless-2024-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: mac80211: fix race condition on enabling fast-xmit wifi: iwlwifi: fix a memory corruption wifi: mac80211: fix potential sta-link leak wifi: cfg80211/mac80211: remove dependency on non-existing option wifi: cfg80211: fix missing interfaces when dumping wifi: ath11k: rely on mac80211 debugfs handling for vif wifi: p54: fix GCC format truncation warning with wiphy->fw_version ==================== Link: https://lore.kernel.org/r/20240122153434.E0254C433C7@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-18wifi: ath11k: rely on mac80211 debugfs handling for vifBenjamin Berg
mac80211 started to delete debugfs entries in certain cases, causing a ath11k to crash when it tried to delete the entries later. Fix this by relying on mac80211 to delete the entries when appropriate and adding them from the vif_add_debugfs handler. Fixes: 0a3d898ee9a8 ("wifi: mac80211: add/remove driver debugfs entries as appropriate") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218364 Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240115101805.1277949-1-benjamin@sipsolutions.net
2024-01-18wifi: ath11k: replace ENOTSUPP with EOPNOTSUPPKarthikeyan Periyasamy
ENOTSUPP is not a standard error code, don't use it. Replace with EOPNOTSUPP instead. No functional changes, compile tested only. Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240117080431.2907471-3-quic_periyasa@quicinc.com
2024-01-16wifi: ath11k: document HAL_RX_BUF_RBM_SW4_BMJeff Johnson
Commit 7636c9a6e7d7 ("wifi: ath11k: Add multi TX ring support for WCN6750") added HAL_RX_BUF_RBM_SW4_BM to enum hal_rx_buf_return_buf_manager. However, as flagged by the kernel-doc script, the documentation was not updated: drivers/net/wireless/ath/ath11k/hal.h:689: warning: Enum value 'HAL_RX_BUF_RBM_SW4_BM' not described in enum 'hal_rx_buf_return_buf_manager' So update the documentation. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240111-document-hal_rx_buf_rbm_sw4_bm-v1-1-ad277e8ab3cc@quicinc.com
2024-01-14wifi: ath11k: use WMI_VDEV_SET_TPC_POWER_CMDID when EXT_TPC_REG_SUPPORT for ↵Wen Gong
6 GHz When station is connected to a 6 GHz AP, it has 2 ways to configure the power limit to firmware. The first way is to send 2 WMI commands WMI_PDEV_PARAM_TXPOWER_LIMIT2G/WMI_PDEV_PARAM_TXPOWER_LIMIT5G to firmware, the second way is to send WMI_VDEV_SET_TPC_POWER_CMDID to firmware which include more parameters for power control. When firmware supports SERVICE_EXT_TPC_REG, it means firmware supports WMI_VDEV_SET_TPC_POWER_CMDID, then ath11k selects the second way. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231218085844.2658-13-quic_bqiang@quicinc.com
2024-01-14wifi: ath11k: add handler for WMI_VDEV_SET_TPC_POWER_CMDIDWen Gong
Add the handler for WMI_VDEV_SET_TPC_POWER_CMDID, it is for 6 GHz band. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231218085844.2658-12-quic_bqiang@quicinc.com
2024-01-14wifi: ath11k: add WMI_TLV_SERVICE_EXT_TPC_REG_SUPPORT service bitWen Gong
Firmware advertises support for SERVICE_EXT_TPC_REG via a WMI service bit. Add the definition of this service bit so that a subsequent patch can check whether or not firmware supports this service. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231218085844.2658-11-quic_bqiang@quicinc.com
2024-01-14wifi: ath11k: fill parameters for vdev set tpc power WMI commandWen Gong
Prepare the parameters which are needed for WMI command WMI_VDEV_SET_TPC_POWER_CMDID. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231218085844.2658-10-quic_bqiang@quicinc.com
2024-01-14wifi: ath11k: save max transmit power in vdev start response event from firmwareWen Gong
Save the max transmit power received in the vdev start response event from firmware. A subsequent patch will use this to calculate the final power value for WMI_VDEV_SET_TPC_POWER_CMDID. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231218085844.2658-9-quic_bqiang@quicinc.com
2024-01-14wifi: ath11k: add parse of transmit power envelope elementWen Gong
The transmit power envelope element has some fields for power, ath11k should parse it according to IEEE Std 802.11ax™‐2021. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231218085844.2658-8-quic_bqiang@quicinc.com
2024-01-14wifi: ath11k: save power spectral density(PSD) of regulatory ruleWen Gong
Save the power spectral density (PSD) report from firmware to struct ieee80211_reg_rule. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231218085844.2658-7-quic_bqiang@quicinc.com
2024-01-14wifi: ath11k: update regulatory rules when connect to AP on 6 GHz band for ↵Wen Gong
station When station connect to AP on 6 GHz band, it needs switch the regulatory rules according to the regulatory info sub field in HE operation element. Switch to the power type which AP used for station interface. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231218085844.2658-6-quic_bqiang@quicinc.com
2024-01-14wifi: ath11k: update regulatory rules when interface addedWen Gong
There are two power types for 6 GHz regulatory, one is AP, another is client. When firmware boots up, WMI_REG_CHAN_LIST_CC_EXT_EVENTID is sent from firmware at an early stage, the interface mode is not decided at this point, then ath11k select reg rules of AP type as default. After interface is created, it is exactly decided the interface type such as AP/mesh point/station. Then ath11k need to update reg rules to the exact power type matched to the interface type. The client power type is used for station interface, and AP power type is used for AP/mesh point interface. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231218085844.2658-5-quic_bqiang@quicinc.com
2024-01-14wifi: ath11k: fix a possible dead lock caused by ab->base_lockBaochen Qiang
spin_lock()/spin_unlock() are used in ath11k_reg_chan_list_event() to acquire/release ab->base_lock. For now this is safe because that function is only called in soft IRQ context. But ath11k_reg_chan_list_event() will be called from process context in an upcoming patch, and this can result in a deadlock if ab->base_lock is acquired in process context and then soft IRQ occurs on the same CPU and tries to acquire that lock. Fix it by using spin_lock_bh() and spin_unlock_bh() instead. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Fixes: 69a0fcf8a9f2 ("ath11k: Avoid reg rules update during firmware recovery") Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231218085844.2658-4-quic_bqiang@quicinc.com
2024-01-14wifi: ath11k: store cur_regulatory_info for each radioWen Gong
The regulatory info of WMI_REG_CHAN_LIST_CC_EXT_EVENTID is not saved in ath11k now, the info should be saved in ath11k. Save the info for each radio and support switch regulatory rules dynamically. As mac.c will also call ath11k_reg_handle_chan_list() in next patches move the function to reg.c. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231218085844.2658-3-quic_bqiang@quicinc.com
2024-01-14wifi: ath11k: add support to select 6 GHz regulatory typeWen Gong
There are 3 types of regulatory rules for AP mode and 6 type for station mode. Add wmi_vdev_type and ieee80211_ap_reg_power to select the exact reg rules. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231218085844.2658-2-quic_bqiang@quicinc.com
2024-01-11wifi: ath11k: fix IOMMU errors on buffer ringsZhenghao Gu
virt_to_phys() doesn't work on systems with IOMMU enabled, which have non-identity physical-to-IOVA mappings. It leads to IO_PAGE_FAULTs like this: [IO_PAGE_FAULT domain=0x0023 address=0x1cce00000 flags=0x0020] And no association to the AP can be established. This patch changes that to dma_map_single(), which works correctly. Even virt_to_phys() documentation says device drivers should not use it: This function does not give bus mappings for DMA transfers. In almost all conceivable cases a device driver should not be using this function Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Zhenghao Gu <imguzh@gmail.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231212031914.47339-1-imguzh@gmail.com
2023-12-18wifi: ath11k: refactor ath11k_wmi_tlv_parse_alloc()Dmitry Antipov
Since 'ath11k_wmi_tlv_parse_alloc()' always operates on 'skb->data, skb->len' tuple, it may be simplified to pass the only 'skb' argument instead (which also implies refactoring of 'ath11k_pull_bcn_tx_status_ev()' and 'ath11k_pull_chan_info_ev()' in the same way). Compile tested only. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231214161117.75145-1-dmantipov@yandex.ru
2023-12-15wifi: ath11k: workaround too long expansion sparse warningsKalle Valo
In v6.7-rc1 sparse warns: drivers/net/wireless/ath/ath11k/mac.c:4702:15: error: too long token expansion drivers/net/wireless/ath/ath11k/mac.c:4702:15: error: too long token expansion drivers/net/wireless/ath/ath11k/mac.c:8393:23: error: too long token expansion drivers/net/wireless/ath/ath11k/mac.c:8393:23: error: too long token expansion Workaround the warnings by refactoring the code to a new function, which also reduces code duplication. And in the new function use max3() to make the code more readable. No functional changes, compile tested only. Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231214161740.1582340-1-kvalo@kernel.org
2023-12-12wifi: ath11k: Fix ath11k_htc_record flexible recordJeff Johnson
Transform the zero-length ath11k_htc_record::credit_report array into a proper flexible array. Since this is the only array in ath11k_htc_record, remove the unnecessary union. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231205-flexarray-htc_record-v2-1-fbb56d436951@quicinc.com
2023-11-30wifi: ath11k: Convert to platform remove callback returning voidUwe Kleine-König
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231117093056.873834-9-u.kleine-koenig@pengutronix.de
2023-11-30wifi: ath11k: fix race due to setting ATH11K_FLAG_EXT_IRQ_ENABLED too earlyBaochen Qiang
We are seeing below error randomly in the case where only one MSI vector is configured: kernel: ath11k_pci 0000:03:00.0: wmi command 16387 timeout The reason is, currently, in ath11k_pcic_ext_irq_enable(), ATH11K_FLAG_EXT_IRQ_ENABLED is set before NAPI is enabled. This results in a race condition: after ATH11K_FLAG_EXT_IRQ_ENABLED is set but before NAPI enabled, CE interrupt breaks in. Since IRQ is shared by CE and data path, ath11k_pcic_ext_interrupt_handler() is also called where we call disable_irq_nosync() to disable IRQ. Then napi_schedule() is called but it does nothing because NAPI is not enabled at that time, meaning ath11k_pcic_ext_grp_napi_poll() will never run, so we have no chance to call enable_irq() to enable IRQ back. Finally we get above error. Fix it by setting ATH11K_FLAG_EXT_IRQ_ENABLED after all NAPI and IRQ work are done. With the fix, we are sure that by the time ATH11K_FLAG_EXT_IRQ_ENABLED is set, NAPI is enabled. Note that the fix above also introduce some side effects: if ath11k_pcic_ext_interrupt_handler() breaks in after NAPI enabled but before ATH11K_FLAG_EXT_IRQ_ENABLED set, nothing will be done by the handler this time, the work will be postponed till the next time the IRQ fires. Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231117003919.26218-1-quic_bqiang@quicinc.com
2023-11-30wifi: ath11k: remove ath11k_htc_record::pauload[]Jeff Johnson
The misspelled pauload member of struct ath11k_htc_record is unused, so remove it. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231127-flexarray-htc_record-v1-3-6be1f36126fd@quicinc.com
2023-11-30wifi: ath11k: Update Qualcomm Innovation Center, Inc. copyrightsJeff Johnson
Update the copyright for all ath11k files modified on behalf of Qualcomm Innovation Center, Inc. in 2021 through 2023. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231128-ath12kcopyrights-v1-2-be0b7408cbac@quicinc.com
2023-11-29wifi: ath11k: use select for CRYPTO_MICHAEL_MICJames Prestwood
Let ath11k select this option automatically which makes building more intuitive if the user enables this driver (rather than the driver not building unless CRYPTO_MICHAEL_MIC is explicitly enabled). Further investigation shows that ath11k and ath12k are the only who use 'depends on' with CRYPTO_MICHAEL_MIC: ./drivers/net/wireless/intel/ipw2x00/Kconfig: select CRYPTO_MICHAEL_MIC ./drivers/net/wireless/intersil/hostap/Kconfig: select CRYPTO_MICHAEL_MIC ./drivers/net/wireless/intersil/orinoco/Kconfig: select CRYPTO_MICHAEL_MIC ./drivers/net/wireless/ath/ath11k/Kconfig: depends on CRYPTO_MICHAEL_MIC ./drivers/net/wireless/ath/ath12k/Kconfig: depends on CRYPTO_MICHAEL_MIC ./drivers/staging/rtl8192e/Kconfig: select CRYPTO_MICHAEL_MIC ./drivers/staging/ks7010/Kconfig: select CRYPTO_MICHAEL_MIC Signed-off-by: James Prestwood <prestwoj@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231113153544.282461-1-prestwoj@gmail.com
2023-11-22wifi: ath11k: Consolidate WMI peer flagsJeff Johnson
Currently wmi.h has two separate set of definitions for peer flags. One set of flags is defined in enum wmi_tlv_peer_flags, and, except for the last three, are named WMI_TLV_PEER_*. The other set of flags are defined as macros, and are named WMI_PEER_*. The last three macros have the same name as the last three wmi_tlv_peer_flags enumerators. The code only uses the WMI_PEER_* names; the WMI_TLV_PEER_* names are unused. So as a first step in consolidation, remove all the WMI_TLV_PEER_* names. But since having an enum to define all the flags is actually a good thing since that provides a handle by which to refer to the entire set of flags, recast the WMI_PEER_* macros into enumerators. Compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231106-ath-peer-flags-v1-3-781e83b7e8e8@quicinc.com
2023-11-22wifi: ath11k: Remove obsolete struct wmi_peer_flags_map *peer_flagsJeff Johnson
Currently both struct ath11k_pdev_wmi and struct ath11k_wmi_base define: const struct wmi_peer_flags_map *peer_flags; But that member is not used, and in fact, struct wmi_peer_flags_map is not defined within ath11k; these are obsolete remnants inherited from ath10k. So remove them. Compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231106-ath-peer-flags-v1-1-781e83b7e8e8@quicinc.com
2023-11-22wifi: ath11k: Remove struct ath11k::opsJeff Johnson
Currently struct ath11k defines the following member: struct ieee80211_ops *ops; This is being flagged by checkpatch.pl: WARNING: struct ieee80211_ops should normally be const The original plan was to add the const qualifier. However, it turns out this is actually unused, so remove it. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231106-ath12k-remove-ieee80211_ops-v1-1-d72cef1a855b@quicinc.com
2023-11-13wifi: ath11k: Remove unneeded semicolonYang Li
./drivers/net/wireless/ath/ath11k/fw.c:136:2-3: Unneeded semicolon Reported-by: Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7073 Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231030060225.28987-1-yang.lee@linux.alibaba.com
2023-11-13wifi: ath11k: Defer on rproc_get failureLuca Weiss
If we already have gotten the rproc_handle (meaning the "qcom,rproc" property is defined in the devicetree), it's a valid state that the remoteproc module hasn't probed yet so we should defer probing instead of just failing to probe. This resolves a race condition when the ath11k driver probes and fails before the wpss remoteproc driver has probed, like the following: [ 6.232360] ath11k 17a10040.wifi: failed to get rproc [ 6.232366] ath11k 17a10040.wifi: failed to get rproc: -22 [ 6.232478] ath11k: probe of 17a10040.wifi failed with error -22 ... [ 6.252415] remoteproc remoteproc2: 8a00000.remoteproc is available [ 6.252776] remoteproc remoteproc2: powering up 8a00000.remoteproc [ 6.252781] remoteproc remoteproc2: Booting fw image qcom/qcm6490/fairphone5/wpss.mdt, size 7188 So, defer the probe if we hit that so we can retry later once the wpss remoteproc is available. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-01264-QCAMSLSWPLZ-1.37886.3 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231027-ath11k-rproc-defer-v1-1-f6b6a812cd18@fairphone.com
2023-10-25Revert "wifi: ath11k: call ath11k_mac_fils_discovery() without condition"Kalle Valo
This reverts commit e149353e6562f3e3246f75dfc4cca6a0cc5b4efc. The commit caused QCA6390 hw2.0 firmware WLAN.HST.1.0.1-05266-QCAHSTSWPLZ_V2_TO_X86-1 to crash during disconnect: [71990.787525] ath11k_pci 0000:72:00.0: firmware crashed: MHI_CB_EE_RDDM Closes: https://lore.kernel.org/all/87edhu3550.fsf@kernel.org/ Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://lore.kernel.org/r/20231023164120.651151-1-kvalo@kernel.org
2023-10-25wifi: ath11k: fix gtk offload status event lockingJohan Hovold
The ath11k active pdevs are protected by RCU but the gtk offload status event handling code calling ath11k_mac_get_arvif_by_vdev_id() was not marked as a read-side critical section. Mark the code in question as an RCU read-side critical section to avoid any potential use-after-free issues. Compile tested only. Fixes: a16d9b50cfba ("ath11k: support GTK rekey offload") Cc: stable@vger.kernel.org # 5.18 Cc: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231019155342.31631-1-johan+linaro@kernel.org
2023-10-25wifi: ath11k: fix htt pktlog lockingJohan Hovold
The ath11k active pdevs are protected by RCU but the htt pktlog handling code calling ath11k_mac_get_ar_by_pdev_id() was not marked as a read-side critical section. Mark the code in question as an RCU read-side critical section to avoid any potential use-after-free issues. Compile tested only. Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Cc: stable@vger.kernel.org # 5.6 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231019112521.2071-1-johan+linaro@kernel.org
2023-10-25wifi: ath11k: fix dfs radar event lockingJohan Hovold
The ath11k active pdevs are protected by RCU but the DFS radar event handling code calling ath11k_mac_get_ar_by_pdev_id() was not marked as a read-side critical section. Mark the code in question as an RCU read-side critical section to avoid any potential use-after-free issues. Compile tested only. Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Cc: stable@vger.kernel.org # 5.6 Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231019153115.26401-3-johan+linaro@kernel.org
generated by cgit (git 2.34.1) at 2025-07-18 04:42:08 +0000