summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath11k
AgeCommit message (Collapse)Author
2023-10-25wifi: ath11k: fix temperature event lockingJohan Hovold
The ath11k active pdevs are protected by RCU but the temperature event handling code calling ath11k_mac_get_ar_by_pdev_id() was not marked as a read-side critical section as reported by RCU lockdep: ============================= WARNING: suspicious RCU usage 6.6.0-rc6 #7 Not tainted ----------------------------- drivers/net/wireless/ath/ath11k/mac.c:638 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 no locks held by swapper/0/0. ... Call trace: ... lockdep_rcu_suspicious+0x16c/0x22c ath11k_mac_get_ar_by_pdev_id+0x194/0x1b0 [ath11k] ath11k_wmi_tlv_op_rx+0xa84/0x2c1c [ath11k] ath11k_htc_rx_completion_handler+0x388/0x510 [ath11k] Mark the code in question as an RCU read-side critical section to avoid any potential use-after-free issues. Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Fixes: a41d10348b01 ("ath11k: add thermal sensor device support") Cc: stable@vger.kernel.org # 5.7 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231019153115.26401-2-johan+linaro@kernel.org
2023-10-25wifi: ath11k: add firmware-2.bin supportAnilkumar Kolli
Firmware IE containers can dynamically provide various information what firmware supports. Also it can embed more than one image so updating firmware is easy, user just needs to update one file in /lib/firmware/. The firmware API 2 or higher will use the IE container format, the current API 1 will not use the new format but it still is supported for some time. Firmware API 2 files are named as firmware-2.bin (which contains both amss.bin and m3.bin images) and API 1 files are amss.bin and m3.bin. Currently ath11k PCI driver provides firmware binary (amss.bin) path to MHI driver, MHI driver reads firmware from filesystem and boots it. Add provision to read firmware files from ath11k driver and provide the amss.bin firmware data and size to MHI using a pointer. Currently enum ath11k_fw_features is empty, the patches adding features will add the flags. With AHB devices there's no amss.bin or m3.bin, so no changes in how AHB firmware files are used. But AHB devices can use future additions to the meta data, for example in enum ath11k_fw_features. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.9 Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: Anilkumar Kolli <quic_akolli@quicinc.com> Co-developed-by: Kalle Valo <quic_kvalo@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230727100430.3603551-4-kvalo@kernel.org
2023-10-25wifi: ath11k: qmi: refactor ath11k_qmi_m3_load()Kalle Valo
Simple refactoring to make it easier to add firmware-2.bin support in the following patch. Earlier ath11k_qmi_m3_load() supported changing m3.bin contents while ath11k is running. But that's not going to actually work, m3.bin is supposed to be the same during the lifetime of ath11k, for example we don't support changing the firmware capabilities on the fly. Due to this ath11k requests m3.bin firmware file first and only then checks m3_mem->vaddr, so we are basically requesting the firmware file even if it's not needed. Reverse the code so that m3_mem buffer is checked first, and only if it doesn't exist, then m3.bin is requested from user space. Checking for m3_mem->size is redundant when m3_mem->vaddr is NULL, we would not be able to use the buffer in that case. So remove the check for size. Simplify the exit handling and use 'goto out'. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.9 Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://lore.kernel.org/r/20230727100430.3603551-3-kvalo@kernel.org
2023-10-18wifi: ath11k: rename the sc naming convention to abKarthikeyan Periyasamy
In PCI, thermal and HAL interface layer module, the identifier sc is used to represent an instance of ath11k_base structure. However, within ath11k, the convention is to use "ab" to represent an SoC "base" struct. So change the all instances of sc to ab. Compile tested only. Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231014032650.32605-3-quic_periyasa@quicinc.com
2023-10-18wifi: ath11k: rename the wmi_sc naming convention to wmi_abKarthikeyan Periyasamy
In WMI layer module, the identifier wmi_sc is used to represent an instance of ath11k_wmi_base structure. However, within ath11k, the convention is to use "ab" to represent an SoC "base" struct. So change the all instances of wmi_sc to wmi_ab. Compile tested only. Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231014032650.32605-2-quic_periyasa@quicinc.com
2023-10-18wifi: ath11k: Remove ath11k_base::bd_apiJeff Johnson
Currently struct ath11k_base defines the member bd_api. However, this member is only accessed within ath11k_core_fetch_bdf(). Since the scope is local just to that one function, remove it from ath11k_base and instead just use a local stack variable. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231013-ath11k_bd_api-v1-1-3fefe4629706@quicinc.com
2023-10-18wifi: ath11k: Use device_get_match_data()Rob Herring
Use preferred device_get_match_data() instead of of_match_device() to get the driver match data. With this, adjust the includes to explicitly include the correct headers. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231009172923.2457844-11-robh@kernel.org
2023-10-12wifi: ath11k: Introduce and use ath11k_sta_to_arsta()Jeff Johnson
Currently, the logic to return an ath11k_sta pointer, given a ieee80211_sta pointer, uses typecasting throughout the driver. In general, conversion functions are preferable to typecasting since using a conversion function allows the compiler to validate the types of both the input and output parameters. ath11k already defines a conversion function ath11k_vif_to_arvif() for a similar conversion. So introduce ath11k_sta_to_arsta() for this use case, and convert all of the existing typecasting to use this function. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231009-ath11k_sta_to_arsta-v1-1-1563e3a307e8@quicinc.com
2023-10-12wifi: ath11k: Remove unused struct ath11k_htc_frameJeff Johnson
struct ath11k_htc_frame is unused, and since it illogically contains two consecutive flexible arrays, it could never be used, so remove it. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231009-ath11k_htc_frame-v1-1-81d405b7a195@quicinc.com
2023-10-12wifi: ath11k: add parsing of phy bitmap for reg rulesAditya Kumar Singh
Certain regulatory domains could put restrictions on phy mode operation. For example, in a few countries HE Operation is not allowed. For such countries, firmware indicates this via phy bitmap in each reg rule. Currently, there is no logic to parse this info and then pass it on to the cfg80211/regulatory. Add parsing of this phy bitmap from the regulatory channel change event and then accordingly map it to cfg80211/regulatory flags and pass it on to it. While at it, correct typo in debug print s/dsf/dfs. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231004092655.25020-1-quic_adisi@quicinc.com
2023-10-12wifi: ath11k: ath11k_debugfs_register(): fix format-truncation warningKalle Valo
In v6.6-rc4 with GCC 13.2 I see a new warning: drivers/net/wireless/ath/ath11k/debugfs.c: In function 'ath11k_debugfs_register': drivers/net/wireless/ath/ath11k/debugfs.c:1597:51: error: '%d' directive output may be truncated writing between 1 and 3 bytes into a region of size 2 [-Werror=format-truncation=] drivers/net/wireless/ath/ath11k/debugfs.c:1597:48: note: directive argument in the range [0, 255] drivers/net/wireless/ath/ath11k/debugfs.c:1597:9: note: 'snprintf' output between 5 and 7 bytes into a destination of size 5 Increase the size of pdev_name to 10 bytes to make sure there's enough room for the string. Also change the format to '%u' as ar->pdev_idx is u8. Compile tested only. Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231010062250.2580951-1-kvalo@kernel.org
2023-10-10wifi: ath11k: call ath11k_mac_fils_discovery() without conditionAloka Dixit
Mac80211 does not set flags BSS_CHANGED_FILS_DISCOVERY and BSS_CHANGED_UNSOL_BCAST_PROBE_RESP if there are no updates to FILS discovery and unsolicited broadcast probe response transmission configurations respectively. This results in the transmissions getting stopped during BSS change operations which do not include these attributes. Remove the checks for the flags and always send the existing configuration to firmware. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231004044915.6817-1-quic_alokad@quicinc.com
2023-10-09Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for v6.7. Major changes: ath12k * read board data variant name from SMBIOS
2023-10-06Merge tag 'wireless-next-2023-10-06' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.7 The first pull request for v6.7, with both stack and driver changes. We have a big change how locking is handled in cfg80211 and mac80211 which removes several locks and hopefully simplifies the locking overall. In drivers rtw89 got MCC support and smaller features to other active drivers but nothing out of ordinary. Major changes: cfg80211 - remove wdev mutex, use the wiphy mutex instead - annotate iftype_data pointer with sparse - first kunit tests, for element defrag - remove unused scan_width support mac80211 - major locking rework, remove several locks like sta_mtx, key_mtx etc. and use the wiphy mutex instead - remove unused shifted rate support - support antenna control in frame injection (requires driver support) - convert RX_DROP_UNUSABLE to more detailed reason codes rtw89 - TDMA-based multi-channel concurrency (MCC) support iwlwifi - support set_antenna() operation - support frame injection antenna control ath12k - WCN7850: enable 320 MHz channels in 6 GHz band - WCN7850: hardware rfkill support - WCN7850: enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS to make scan faster ath11k - add chip id board name while searching board-2.bin * tag 'wireless-next-2023-10-06' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (272 commits) wifi: rtlwifi: remove unreachable code in rtl92d_dm_check_edca_turbo() wifi: rtw89: debug: txpwr table supports Wi-Fi 7 chips wifi: rtw89: debug: show txpwr table according to chip gen wifi: rtw89: phy: set TX power RU limit according to chip gen wifi: rtw89: phy: set TX power limit according to chip gen wifi: rtw89: phy: set TX power offset according to chip gen wifi: rtw89: phy: set TX power by rate according to chip gen wifi: rtw89: mac: get TX power control register according to chip gen wifi: rtlwifi: use unsigned long for rtl_bssid_entry timestamp wifi: rtlwifi: fix EDCA limit set by BT coexistence wifi: rt2x00: fix MT7620 low RSSI issue wifi: rtw89: refine bandwidth 160MHz uplink OFDMA performance wifi: rtw89: refine uplink trigger based control mechanism wifi: rtw89: 8851b: update TX power tables to R34 wifi: rtw89: 8852b: update TX power tables to R35 wifi: rtw89: 8852c: update TX power tables to R67 wifi: rtw89: regd: configure Thailand in regulation type wifi: mac80211: add back SPDX identifier wifi: mac80211: fix ieee80211_drop_unencrypted_mgmt return type/value wifi: rtlwifi: cleanup few rtlxxxx_set_hw_reg() routines ... ==================== Link: https://lore.kernel.org/r/87jzrz6bvw.fsf@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-05wifi: ath11k: fix Tx power value during active CACAditya Kumar Singh
Tx power is fetched from firmware's pdev stats. However, during active CAC, firmware does not fill the current Tx power and sends the max initialised value filled during firmware init. If host sends this power to user space, this is wrong since in certain situations, the Tx power could be greater than the max allowed by the regulatory. Hence, host should not be fetching the Tx power during an active CAC. Fix this issue by returning -EAGAIN error so that user space knows that there's no valid value available. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Fixes: 9a2aa68afe3d ("wifi: ath11k: add get_txpower mac ops") Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230912051857.2284-4-quic_adisi@quicinc.com
2023-10-05wifi: ath11k: fix CAC running state during virtual interface startAditya Kumar Singh
Currently channel definition's primary channel's DFS CAC time as well as primary channel's state i.e usable are used to set the CAC_RUNNING flag for the ath11k radio structure. However, this is wrong since certain channel definition are possbile where primary channel may not be a DFS channel but, secondary channel is a DFS channel. For example - channel 36 with 160 MHz bandwidth. In such cases, the flag will not be set which is wrong. Fix this issue by using cfg80211_chandef_dfs_usable() function from cfg80211 which return trues if at least one channel is in usable state. While at it, modify the CAC running debug log message to print the CAC time as well in milli-seconds. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230912051857.2284-3-quic_adisi@quicinc.com
2023-09-28Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for v6.7. Major changes: ath12k * WCN7850: enable 320 MHz channels in 6 GHz band * WCN7850: hardware rfkill support * WCN7850: enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS to make scan faster ath11k * add chip id board name while searching board-2.bin
2023-09-28wifi: ath11k: mac: fix struct ieee80211_sband_iftype_data handlingKalle Valo
Commit e8c1841278a7 ("wifi: cfg80211: annotate iftype_data pointer with sparse") added sparse checks for struct ieee80211_sband_iftype_data handling which immediately found an issue in ath11k: drivers/net/wireless/ath/ath11k/mac.c:7952:22: warning: incorrect type in argument 1 (different address spaces) drivers/net/wireless/ath/ath11k/mac.c:7952:22: expected struct ieee80211_sta_he_cap const *he_cap drivers/net/wireless/ath/ath11k/mac.c:7952:22: got struct ieee80211_sta_he_cap const [noderef] __iftype_data * The problem here is that we are accessing sband->iftype_data directly even though we should use for_each_sband_iftype_data() or similar. Fortunately there's ieee80211_get_he_iftype_cap_vif() which is just what we need here so use it to get HE capabilities. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230927142708.2897504-2-kvalo@kernel.org
2023-09-28wifi: ath11k: fix ath11k_mac_op_remain_on_channel() stack usageDmitry Antipov
When compiling with clang 16.0.6, I've noticed the following: drivers/net/wireless/ath/ath11k/mac.c:8903:12: warning: stack frame size (1032) exceeds limit (1024) in 'ath11k_mac_op_remain_on_channel' [-Wframe-larger-than] static int ath11k_mac_op_remain_on_channel(struct ieee80211_hw *hw, ^ 68/1032 (6.59%) spills, 964/1032 (93.41%) variables So switch to kzalloc()'ed instance of 'struct scan_req_params' like it's done in 'ath11k_mac_op_hw_scan()'. Compile tested only. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230926042906.13725-1-dmantipov@yandex.ru
2023-09-28wifi: ath11k: remove unnecessary (void*) conversionsWu Yunchuan
No need cast (void *) to (struct ath11k_base *), struct hal_rx_msdu_link *), (struct ath11k_buffer_addr *) or other types. Signed-off-by: Wu Yunchuan <yunchuan@nfschina.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230919045150.524304-1-yunchuan@nfschina.com
2023-09-28wifi: ath11k: use kstrtoul_from_user() where appropriateDmitry Antipov
Use 'kstrtoul_from_user()' in 'ath11k_write_file_spectral_count()' and 'ath11k_write_file_spectral_bins()' Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230824075121.121144-4-dmantipov@yandex.ru
2023-09-21wifi: ath11k: remove unused members of 'struct ath11k_base'Dmitry Antipov
Remove set but otherwise unused 'wlan_init_status' and 'wmi_ready' members of 'struct ath11k_base', adjust 'ath11k_wmi_tlv_rdy_parse()' accordingly. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230824075121.121144-2-dmantipov@yandex.ru
2023-09-21wifi: ath11k: drop redundant check in ath11k_dp_rx_mon_dest_process()Dmitry Antipov
In 'ath11k_dp_rx_mon_dest_process()', 'mon_dst_srng' points to a member of 'srng_list', which is a fixed-size array inside 'struct ath11k_hal'. This way, if 'ring_id' is valid (i. e. between 0 and HAL_SRNG_RING_ID_MAX - 1 inclusive), 'mon_dst_srng' can't be NULL and so relevant check may be dropped. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230824075121.121144-1-dmantipov@yandex.ru
2023-09-21wifi: ath11k: drop NULL pointer check in ath11k_update_per_peer_tx_stats()Dmitry Antipov
Since 'user_stats' is a fixed-size array of 'struct htt_ppdu_user_stats' in 'struct htt_ppdu_stats', any of its member can't be NULL and so relevant check may be dropped. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230906093704.14001-1-dmantipov@yandex.ru
2023-09-21wifi: ath11k: fix boot failure with one MSI vectorBaochen Qiang
Commit 5b32b6dd96633 ("ath11k: Remove core PCI references from PCI common code") breaks with one MSI vector because it moves affinity setting after IRQ request, see below log: [ 1417.278835] ath11k_pci 0000:02:00.0: failed to receive control response completion, polling.. [ 1418.302829] ath11k_pci 0000:02:00.0: Service connect timeout [ 1418.302833] ath11k_pci 0000:02:00.0: failed to connect to HTT: -110 [ 1418.303669] ath11k_pci 0000:02:00.0: failed to start core: -110 The detail is, if do affinity request after IRQ activated, which is done in request_irq(), kernel caches that request and returns success directly. Later when a subsequent MHI interrupt is fired, kernel will do the real affinity setting work, as a result, changs the MSI vector. However at that time host has configured old vector to hardware, so host never receives CE or DP interrupts. Fix it by setting affinity before registering MHI controller where host is, for the first time, doing IRQ request. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-01160-QCAMSLSWPLZ-1 Fixes: 5b32b6dd9663 ("ath11k: Remove core PCI references from PCI common code") Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230907015606.16297-1-quic_bqiang@quicinc.com
2023-09-20wifi: ath11k: add chip id board name while searching board-2.bin for WCN6855Wen Gong
Sometimes board-2.bin does not have the board data which matched the parameters such as bus type, vendor, device, subsystem-vendor, subsystem-device, qmi-chip-id and qmi-board-id, then wlan will load fail. Hence add another type which only matches the bus type and qmi-chip-id, then the ratio of missing board data reduced. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230830060226.18664-1-quic_wgong@quicinc.com
2023-09-11wifi: cfg80211: annotate iftype_data pointer with sparseJohannes Berg
There were are a number of cases in mac80211 and iwlwifi (at least) that used the sband->iftype_data pointer directly, instead of using the accessors to find the right array entry to use. Make sparse warn when such a thing is done. To not have a lot of casts, add two helper functions/macros - ieee80211_set_sband_iftype_data() - for_each_sband_iftype_data() Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-05wifi: ath11k: fix tid bitmap is 0 in peer rx mu statsMuna Sinada
Correct parsing of reading offset for rx tid 16 bit bitmap. Incorrect offset caused peer rx mu stats tid bitmap to always be zero. This correction is in the software context and does not affect the firmware interface. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00356-QCAHKSWPL_SILICONZ-1 Signed-off-by: Muna Sinada <quic_msinada@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/1692827868-15667-2-git-send-email-quic_msinada@quicinc.com
2023-09-05wifi: ath11k: move references from rsvd2 to info fieldsMuna Sinada
Remove references to reserved fields and add new info fields for struct hal_rx_ppdu_end_user_stats. Reserved fields should not be accessed, therefore existing references to it are to be changed to referencing specific info fields. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00356-QCAHKSWPL_SILICONZ-1 Signed-off-by: Muna Sinada <quic_msinada@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/1692827868-15667-1-git-send-email-quic_msinada@quicinc.com
2023-09-05wifi: ath11k: mhi: add a warning message for MHI_CB_EE_RDDM crashArowa Suliman
Currently, the ath11k driver does not print a crash signature when a MHI_CB_EE_RDDM crash happens. Checked by triggering a simulated crash using the command and checking dmesg for logs: echo assert > /sys/kernel/debug/ath11k/../simulate_fw_crash Add a warning when firmware crash MHI_CB_EE_RDDM happens. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by: Arowa Suliman <arowa@chromium.org> Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230714001126.463127-1-arowa@chromium.org
2023-08-30Merge tag 'pci-v6.6-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Add locking to read/modify/write PCIe Capability Register accessors for Link Control and Root Control - Use pci_dev_id() when possible instead of manually composing ID from dev->bus->number and dev->devfn Resource management: - Move prototypes for __weak sysfs resource files to linux/pci.h to fix 'no previous prototype' warnings - Make more I/O port accesses depend on HAS_IOPORT - Use devm_platform_get_and_ioremap_resource() instead of open-coding platform_get_resource() followed by devm_ioremap_resource() Power management: - Ensure devices are powered up while accessing VPD - If device is powered-up, keep it that way while polling for PME - Only read PCI_PM_CTRL register when available, to avoid reading the wrong register and corrupting dev->current_state Virtualization: - Avoid Secondary Bus Reset on NVIDIA T4 GPUs Error handling: - Remove unused pci_disable_pcie_error_reporting() - Unexport pci_enable_pcie_error_reporting(), used only by aer.c - Unexport pcie_port_bus_type, used only by PCI core VGA: - Simplify and clean up typos in VGA arbiter Apple PCIe controller driver: - Initialize pcie->nvecs (number of available MSIs) before use Broadcom iProc PCIe controller driver: - Use of_property_read_bool() instead of low-level accessors for boolean properties Broadcom STB PCIe controller driver: - Assert PERST# when probing BCM2711 because some bootloaders don't do it Freescale i.MX6 PCIe controller driver: - Add .host_deinit() callback so we can clean up things like regulators on probe failure or driver unload Freescale Layerscape PCIe controller driver: - Add support for link-down notification so the endpoint driver can process LINK_DOWN events - Add suspend/resume support, including manual PME_Turn_off/PME_TO_Ack handshake - Save Link Capabilities during probe so they can be restored when handling a link-up event, since the controller loses the Link Width and Link Speed values during reset Intel VMD host bridge driver: - Fix disable of bridge windows during domain reset; previously we cleared the base/limit registers, which actually left the windows enabled Marvell MVEBU PCIe controller driver: - Remove unused busn member Microchip PolarFlare PCIe controller driver: - Fix interrupt bit definitions so the SEC and DED interrupt handlers work correctly - Make driver buildable as a module - Read FPGA MSI configuration parameters from hardware instead of hard-coding them Microsoft Hyper-V host bridge driver: - To avoid a NULL pointer dereference, skip MSI restore after hibernate if MSI/MSI-X hasn't been enabled NVIDIA Tegra194 PCIe controller driver: - Revert 'PCI: tegra194: Enable support for 256 Byte payload' because Linux doesn't know how to reduce MPS from to 256 to 128 bytes for endpoints below a switch (because other devices below the switch might already be operating), which leads to 'Malformed TLP' errors Qualcomm PCIe controller driver: - Add DT and driver support for interconnect bandwidth voting for 'pcie-mem' and 'cpu-pcie' interconnects - Fix broken SDX65 'compatible' DT property - Configure controller so MHI bus master clock will be switched off while in ASPM L1.x states - Use alignment restriction from EPF core in EPF MHI driver - Add Endpoint eDMA support - Add MHI eDMA support - Add Snapdragon SM8450 support to the EPF MHI driversupport - Add MHI eDMA support - Add Snapdragon SM8450 support to the EPF MHI driversupport - Add MHI eDMA support - Add Snapdragon SM8450 support to the EPF MHI driversupport - Add MHI eDMA support - Add Snapdragon SM8450 support to the EPF MHI driver - Use iATU for EPF MHI transfers smaller than 4K to avoid eDMA setup latency - Add sa8775p DT binding and driver support Rockchip PCIe controller driver: - Use 64-bit mask on MSI 64-bit PCI address to avoid zeroing out the upper 32 bits SiFive FU740 PCIe controller driver: - Set the supported number of MSI vectors so we can use all available MSI interrupts Synopsys DesignWare PCIe controller driver: - Add generic dwc suspend/resume APIs (dw_pcie_suspend_noirq() and dw_pcie_resume_noirq()) to be called by controller driver suspend/resume ops, and a controller callback to send PME_Turn_Off MicroSemi Switchtec management driver: - Add support for PCIe Gen5 devices Miscellaneous: - Reorder and compress to reduce size of struct pci_dev - Fix race in DOE destroy_work_on_stack() - Add stubs to avoid casts between incompatible function types - Explicitly include correct DT includes to untangle headers" * tag 'pci-v6.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (96 commits) PCI: qcom-ep: Add ICC bandwidth voting support dt-bindings: PCI: qcom: ep: Add interconnects path PCI: qcom-ep: Treat unknown IRQ events as an error dt-bindings: PCI: qcom: Fix SDX65 compatible PCI: endpoint: Add kernel-doc for pci_epc_mem_init() API PCI: epf-mhi: Use iATU for small transfers PCI: epf-mhi: Add support for SM8450 PCI: epf-mhi: Add eDMA support PCI: qcom-ep: Add eDMA support PCI: epf-mhi: Make use of the alignment restriction from EPF core PCI/PM: Only read PCI_PM_CTRL register when available PCI: qcom: Add support for sa8775p SoC dt-bindings: PCI: qcom: Add sa8775p compatible PCI: qcom-ep: Pass alignment restriction to the EPF core PCI: Simplify pcie_capability_clear_and_set_word() control flow PCI: Tidy config space save/restore messages PCI: Fix code formatting inconsistencies PCI: Fix typos in docs and comments PCI: Fix pci_bus_resetable(), pci_slot_resetable() name typos PCI: Simplify pci_dev_driver() ...
2023-08-25Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for v6.6. No major changes, only smaller fixes and cleanups this time.
2023-08-25Fix nomenclature for USB and PCI wireless devicesAlan Stern
A mouse that uses a USB connection is called a "USB mouse" device (or "USB mouse" for short), not a "mouse USB" device. By analogy, a WiFi adapter that connects to the host computer via USB is a "USB wireless" device, not a "wireless USB" device. (The latter term more properly refers to a defunct Wireless USB specification, which described a technology for sending USB protocol messages over an ultra wideband radio link.) Similarly for a WiFi adapter card that plugs into a PCIe slot: It is a "PCIe wireless" device, not a "wireless PCIe" device. Rephrase the text in the kernel source where the word ordering is wrong. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/57da7c80-0e48-41b5-8427-884a02648f55@rowland.harvard.edu
2023-08-23wifi: ath11k: Remove unused declarationsYue Haibing
Commit 2c3960c2253d ("ath11k: setup ce tasklet for control path") declared but never implemented ath11k_ce_map_service_to_pipe(). Commit e3396b8bddd2 ("ath11k: ce: support different CE configurations") declared but never implemented ath11k_ce_attr_attach(). Commit d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") declared but never implemented ath11k_qmi_event_work()/ath11k_qmi_msg_recv_work(). Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230811104413.33668-1-yuehaibing@huawei.com
2023-08-23wifi: ath11k: fix Wvoid-pointer-to-enum-cast warningKrzysztof Kozlowski
'hw_rev' is an enum, thus cast of pointer on 64-bit compile test with W=1 causes: h11k/ahb.c:1124:11: error: cast to smaller integer type 'enum ath11k_hw_rev' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230810091224.70088-1-krzysztof.kozlowski@linaro.org
2023-08-23wifi: ath11k: simplify the code with module_platform_driverYang Yingliang
The init/exit() of driver only calls platform_driver_register/unregister, it can be simpilfied with module_platform_driver. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230804091255.1347178-1-yangyingliang@huawei.com
2023-08-23wifi: ath11k: Fix a few spelling errorsJeff Johnson
Fix a few issues flagged by 'codespell'. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230822-ath_spelling-v1-2-8e2698759564@quicinc.com
2023-08-23wifi: ath11k: Consistently use ath11k_vif_to_arvif()Jeff Johnson
Helper function ath11k_vif_to_arvif() exists to retrieve a struct ath11k_vif from a struct ieee80211_vif. However, in multiple places this logic is open-coded with inline typecasting. Since the typecasting prevents the compiler from type-checking the source and destination, update the driver to consistently use the helper function. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230821-ath11k_vif_to_arvif-v1-1-fa2c3b60b5cf@quicinc.com
2023-08-23wifi: ath11k: Cleanup mac80211 references on failure during tx_completeSven Eckelmann
When a function is using functions from mac80211 to free an skb then it should do it consistently and not switch to the generic dev_kfree_skb_any (or similar functions). Otherwise (like in the error handlers), mac80211 will will not be aware of the freed skb and thus not clean up related information in its internal data structures. Not doing so lead in the past to filled up structure which then prevented new clients to connect. Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Fixes: 6257c702264c ("wifi: ath11k: fix tx status reporting in encap offload mode") Cc: stable@vger.kernel.org Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230802-ath11k-ack_status_leak-v2-2-c0af729d6229@narfation.org
2023-08-23wifi: ath11k: Don't drop tx_status when peer cannot be foundSven Eckelmann
When a station idles for a long time, hostapd will try to send a QoS Null frame to the station as "poll". NL80211_CMD_PROBE_CLIENT is used for this purpose. And the skb will be added to ack_status_frame - waiting for a completion via ieee80211_report_ack_skb(). But when the peer was already removed before the tx_complete arrives, the peer will be missing. And when using dev_kfree_skb_any (instead of going through mac80211), the entry will stay inside ack_status_frames. This IDR will therefore run full after 8K request were generated for such clients. At this point, the access point will then just stall and not allow any new clients because idr_alloc() for ack_status_frame will fail. ieee80211_free_txskb() on the other hand will (when required) call ieee80211_report_ack_skb() and make sure that (when required) remove the entry from the ack_status_frame. Tested-on: IPQ6018 hw1.0 WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Fixes: 6257c702264c ("wifi: ath11k: fix tx status reporting in encap offload mode") Fixes: 94739d45c388 ("ath11k: switch to using ieee80211_tx_status_ext()") Cc: stable@vger.kernel.org Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230802-ath11k-ack_status_leak-v2-1-c0af729d6229@narfation.org
2023-08-21wifi: ath11k: Use RMW accessors for changing LNKCTLIlpo Järvinen
Don't assume that only the driver would be accessing LNKCTL. ASPM policy changes can trigger write to LNKCTL outside of driver's control. Use RMW capability accessors which do proper locking to avoid losing concurrent updates to the register value. On restore, clear the ASPMC field properly. Suggested-by: Lukas Wunner <lukas@wunner.de> Fixes: e9603f4bdcc0 ("ath11k: pci: disable ASPM L0sLs before downloading firmware") Link: https://lore.kernel.org/r/20230717120503.15276-9-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Kalle Valo <kvalo@kernel.org>
2023-08-04Merge tag 'wireless-next-2023-08-04' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.6 The first pull request for v6.6 and only driver patches this time. Nothing special really standing out, it has been quiet most likely due to vacations. Major changes: rtl8xxxu - enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU), RTL8192EU and RTL8723BU mwifiex - allow moving to a different namespace mt76 - preparation for mt7925 support - mt7981 support ath12k - Extremely High Throughput (EHT) PHY support for Wi-Fi 7 * tag 'wireless-next-2023-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (172 commits) wifi: rtw89: return failure if needed firmware elements are not recognized wifi: rtw89: add to parse firmware elements of BB and RF tables wifi: rtw89: introduce infrastructure of firmware elements wifi: rtw89: add firmware suit for BB MCU 0/1 wifi: rtw89: add firmware parser for v1 format wifi: rtw89: introduce v1 format of firmware header wifi: rtw89: support firmware log with formatted text wifi: rtw89: recognize log format from firmware file wifi: ath12k: avoid deadlock by change ieee80211_queue_work for regd_update_work wifi: ath12k: add handler for scan event WMI_SCAN_EVENT_DEQUEUED wifi: ath12k: relax list iteration in ath12k_mac_vif_unref() wifi: ath12k: configure puncturing bitmap wifi: ath12k: parse WMI service ready ext2 event wifi: ath12k: add MLO header in peer association wifi: ath12k: peer assoc for 320 MHz wifi: ath12k: add WMI support for EHT peer wifi: ath12k: prepare EHT peer assoc parameters wifi: ath12k: add EHT PHY modes wifi: ath12k: propagate EHT capabilities to userspace wifi: ath12k: WMI support to process EHT capabilities ... ==================== Link: https://lore.kernel.org/r/87msz7j942.fsf@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-03Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for v6.6. Major changes: ath12k * Extremely High Throughput (EHT) PHY support for Wi-Fi 7
2023-08-02wifi: ath11k: Remove cal_done check during probeSeevalamuthu Mariappan
In some race conditions, calibration done QMI message is received even before host wait starts for calibration to be done. Due to this, resetting firmware was not performed after calibration. Hence, remove cal_done check in ath11k_qmi_fwreset_from_cold_boot() as this is called only from probe. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Seevalamuthu Mariappan <quic_seevalam@quicinc.com> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230726141032.3061-4-quic_rajkbhag@quicinc.com
2023-08-02wifi: ath11k: Add coldboot calibration support for QCN9074Anilkumar Kolli
QCN9074 supports 6 GHz, which has increased number of channels compared to 5 GHz/2 GHz. So, to support coldboot calibration in QCN9074 ATH11K_COLD_BOOT_FW_RESET_DELAY extended to 60 seconds. To avoid code redundancy, fwreset_from_cold_boot moved to QMI and made common for both ahb and pci. Coldboot calibration is enabled only in FTM mode for QCN9074. QCN9074 requires firmware restart after coldboot, hence enable cbcal_restart_fw in hw_params. This support can be enabled/disabled using hw params for different hardware. Currently it is not enabled for QCA6390. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Anilkumar Kolli <quic_akolli@quicinc.com> Signed-off-by: Seevalamuthu Mariappan <quic_seevalam@quicinc.com> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230726141032.3061-3-quic_rajkbhag@quicinc.com
2023-08-02wifi: ath11k: Split coldboot calibration hw_paramSeevalamuthu Mariappan
QCN9074 enables coldboot calibration only in Factory Test Mode (FTM). Hence, split cold_boot_calib to two hw_params for mission and FTM mode. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Seevalamuthu Mariappan <quic_seevalam@quicinc.com> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230726141032.3061-2-quic_rajkbhag@quicinc.com
2023-08-02wifi: ath11k: simplify ath11k_mac_validate_vht_he_fixed_rate_settings()Dmitry Antipov
In ath11k_mac_validate_vht_he_fixed_rate_settings() ar->ab->peers list is not altered so list_for_each_entry() should be safe. Compile tested only. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230726092113.78794-1-dmantipov@yandex.ru
2023-08-02wifi: ath11k: fix band selection for ppdu received in channel 177 of 5 GHzAditya Kumar Singh
5 GHz band channel 177 support was added with the commit e5e94d10c856 ("wifi: ath11k: add channel 177 into 5 GHz channel list"). However, during processing for the received ppdu in ath11k_dp_rx_h_ppdu(), channel number is checked only till 173. This leads to driver code checking for channel and then fetching the band from it which is extra effort since firmware has already given the channel number in the metadata. Fix this issue by checking the channel number till 177 since we support it now. Found via code review. Compile tested only. Fixes: e5e94d10c856 ("wifi: ath11k: add channel 177 into 5 GHz channel list") Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230726044624.20507-1-quic_adisi@quicinc.com
2023-08-01wifi: drivers: Explicitly include correct DT includesRob Herring
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230724211914.805876-1-robh@kernel.org
2023-07-26Revert "wifi: ath11k: Enable threaded NAPI"Kalle Valo
This reverts commit 13aa2fb692d3717767303817f35b3e650109add3. This commit broke QCN9074 initialisation: [ 358.960477] ath11k_pci 0000:04:00.0: ce desc not available for wmi command 36866 [ 358.960481] ath11k_pci 0000:04:00.0: failed to send WMI_STA_POWERSAVE_PARAM_CMDID [ 358.960484] ath11k_pci 0000:04:00.0: could not set uapsd params -105 As there's no fix available let's just revert it to get QCN9074 working again. Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217536 Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230720151444.2016637-1-kvalo@kernel.org
generated by cgit (git 2.34.1) at 2025-07-18 08:21:36 +0000