summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath11k
AgeCommit message (Collapse)Author
2023-06-28Merge tag 'net-next-6.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking changes from Jakub Kicinski: "WiFi 7 and sendpage changes are the biggest pieces of work for this release. The latter will definitely require fixes but I think that we got it to a reasonable point. Core: - Rework the sendpage & splice implementations Instead of feeding data into sockets page by page extend sendmsg handlers to support taking a reference on the data, controlled by a new flag called MSG_SPLICE_PAGES Rework the handling of unexpected-end-of-file to invoke an additional callback instead of trying to predict what the right combination of MORE/NOTLAST flags is Remove the MSG_SENDPAGE_NOTLAST flag completely - Implement SCM_PIDFD, a new type of CMSG type analogous to SCM_CREDENTIALS, but it contains pidfd instead of plain pid - Enable socket busy polling with CONFIG_RT - Improve reliability and efficiency of reporting for ref_tracker - Auto-generate a user space C library for various Netlink families Protocols: - Allow TCP to shrink the advertised window when necessary, prevent sk_rcvbuf auto-tuning from growing the window all the way up to tcp_rmem[2] - Use per-VMA locking for "page-flipping" TCP receive zerocopy - Prepare TCP for device-to-device data transfers, by making sure that payloads are always attached to skbs as page frags - Make the backoff time for the first N TCP SYN retransmissions linear. Exponential backoff is unnecessarily conservative - Create a new MPTCP getsockopt to retrieve all info (MPTCP_FULL_INFO) - Avoid waking up applications using TLS sockets until we have a full record - Allow using kernel memory for protocol ioctl callbacks, paving the way to issuing ioctls over io_uring - Add nolocalbypass option to VxLAN, forcing packets to be fully encapsulated even if they are destined for a local IP address - Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure in-kernel ECMP implementation (e.g. Open vSwitch) select the same link for all packets. Support L4 symmetric hashing in Open vSwitch - PPPoE: make number of hash bits configurable - Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client (ipconfig) - Add layer 2 miss indication and filtering, allowing higher layers (e.g. ACL filters) to make forwarding decisions based on whether packet matched forwarding state in lower devices (bridge) - Support matching on Connectivity Fault Management (CFM) packets - Hide the "link becomes ready" IPv6 messages by demoting their printk level to debug - HSR: don't enable promiscuous mode if device offloads the proto - Support active scanning in IEEE 802.15.4 - Continue work on Multi-Link Operation for WiFi 7 BPF: - Add precision propagation for subprogs and callbacks. This allows maintaining verification efficiency when subprograms are used, or in fact passing the verifier at all for complex programs, especially those using open-coded iterators - Improve BPF's {g,s}setsockopt() length handling. Previously BPF assumed the length is always equal to the amount of written data. But some protos allow passing a NULL buffer to discover what the output buffer *should* be, without writing anything - Accept dynptr memory as memory arguments passed to helpers - Add routing table ID to bpf_fib_lookup BPF helper - Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands - Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark maps as read-only) - Show target_{obj,btf}_id in tracing link fdinfo - Addition of several new kfuncs (most of the names are self-explanatory): - Add a set of new dynptr kfuncs: bpf_dynptr_adjust(), bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size() and bpf_dynptr_clone(). - bpf_task_under_cgroup() - bpf_sock_destroy() - force closing sockets - bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs Netfilter: - Relax set/map validation checks in nf_tables. Allow checking presence of an entry in a map without using the value - Increase ip_vs_conn_tab_bits range for 64BIT builds - Allow updating size of a set - Improve NAT tuple selection when connection is closing Driver API: - Integrate netdev with LED subsystem, to allow configuring HW "offloaded" blinking of LEDs based on link state and activity (i.e. packets coming in and out) - Support configuring rate selection pins of SFP modules - Factor Clause 73 auto-negotiation code out of the drivers, provide common helper routines - Add more fool-proof helpers for managing lifetime of MDIO devices associated with the PCS layer - Allow drivers to report advanced statistics related to Time Aware scheduler offload (taprio) - Allow opting out of VF statistics in link dump, to allow more VFs to fit into the message - Split devlink instance and devlink port operations New hardware / drivers: - Ethernet: - Synopsys EMAC4 IP support (stmmac) - Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches - Marvell 88E6250 7 port switches - Microchip LAN8650/1 Rev.B0 PHYs - MediaTek MT7981/MT7988 built-in 1GE PHY driver - WiFi: - Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps - Realtek RTL8723DS (SDIO variant) - Realtek RTL8851BE - CAN: - Fintek F81604 Drivers: - Ethernet NICs: - Intel (100G, ice): - support dynamic interrupt allocation - use meta data match instead of VF MAC addr on slow-path - nVidia/Mellanox: - extend link aggregation to handle 4, rather than just 2 ports - spawn sub-functions without any features by default - OcteonTX2: - support HTB (Tx scheduling/QoS) offload - make RSS hash generation configurable - support selecting Rx queue using TC filters - Wangxun (ngbe/txgbe): - add basic Tx/Rx packet offloads - add phylink support (SFP/PCS control) - Freescale/NXP (enetc): - report TAPRIO packet statistics - Solarflare/AMD: - support matching on IP ToS and UDP source port of outer header - VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6 - add devlink dev info support for EF10 - Virtual NICs: - Microsoft vNIC: - size the Rx indirection table based on requested configuration - support VLAN tagging - Amazon vNIC: - try to reuse Rx buffers if not fully consumed, useful for ARM servers running with 16kB pages - Google vNIC: - support TCP segmentation of >64kB frames - Ethernet embedded switches: - Marvell (mv88e6xxx): - enable USXGMII (88E6191X) - Microchip: - lan966x: add support for Egress Stage 0 ACL engine - lan966x: support mapping packet priority to internal switch priority (based on PCP or DSCP) - Ethernet PHYs: - Broadcom PHYs: - support for Wake-on-LAN for BCM54210E/B50212E - report LPI counter - Microsemi PHYs: support RGMII delay configuration (VSC85xx) - Micrel PHYs: receive timestamp in the frame (LAN8841) - Realtek PHYs: support optional external PHY clock - Altera TSE PCS: merge the driver into Lynx PCS which it is a variant of - CAN: Kvaser PCIEcan: - support packet timestamping - WiFi: - Intel (iwlwifi): - major update for new firmware and Multi-Link Operation (MLO) - configuration rework to drop test devices and split the different families - support for segmented PNVM images and power tables - new vendor entries for PPAG (platform antenna gain) feature - Qualcomm 802.11ax (ath11k): - Multiple Basic Service Set Identifier (MBSSID) and Enhanced MBSSID Advertisement (EMA) support in AP mode - support factory test mode - RealTek (rtw89): - add RSSI based antenna diversity - support U-NII-4 channels on 5 GHz band - RealTek (rtl8xxxu): - AP mode support for 8188f - support USB RX aggregation for the newer chips" * tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1602 commits) net: scm: introduce and use scm_recv_unix helper af_unix: Skip SCM_PIDFD if scm->pid is NULL. net: lan743x: Simplify comparison netlink: Add __sock_i_ino() for __netlink_diag_dump(). net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses Revert "af_unix: Call scm_recv() only after scm_set_cred()." phylink: ReST-ify the phylink_pcs_neg_mode() kdoc libceph: Partially revert changes to support MSG_SPLICE_PAGES net: phy: mscc: fix packet loss due to RGMII delays net: mana: use vmalloc_array and vcalloc net: enetc: use vmalloc_array and vcalloc ionic: use vmalloc_array and vcalloc pds_core: use vmalloc_array and vcalloc gve: use vmalloc_array and vcalloc octeon_ep: use vmalloc_array and vcalloc net: usb: qmi_wwan: add u-blox 0x1312 composition perf trace: fix MSG_SPLICE_PAGES build error ipvlan: Fix return value of ipvlan_queue_xmit() netfilter: nf_tables: fix underflow in chain reference counter netfilter: nf_tables: unbind non-anonymous set if rule construction fails ...
2023-06-16wifi: ath11k: Add missing hw_ops->get_ring_selector() for IPQ5018Ziyang Huang
During sending data after clients connected, hw_ops->get_ring_selector() will be called. But for IPQ5018, this member isn't set, and the following NULL pointer exception will be occurred: [ 38.840478] 8<--- cut here --- [ 38.840517] Unable to handle kernel NULL pointer dereference at virtual address 00000000 ... [ 38.923161] PC is at 0x0 [ 38.927930] LR is at ath11k_dp_tx+0x70/0x730 [ath11k] ... [ 39.063264] Process hostapd (pid: 1034, stack limit = 0x801ceb3d) [ 39.068994] Stack: (0x856a9a68 to 0x856aa000) ... [ 39.438467] [<7f323804>] (ath11k_dp_tx [ath11k]) from [<7f314e6c>] (ath11k_mac_op_tx+0x80/0x190 [ath11k]) [ 39.446607] [<7f314e6c>] (ath11k_mac_op_tx [ath11k]) from [<7f17dbe0>] (ieee80211_handle_wake_tx_queue+0x7c/0xc0 [mac80211]) [ 39.456162] [<7f17dbe0>] (ieee80211_handle_wake_tx_queue [mac80211]) from [<7f174450>] (ieee80211_probereq_get+0x584/0x704 [mac80211]) [ 39.467443] [<7f174450>] (ieee80211_probereq_get [mac80211]) from [<7f178c40>] (ieee80211_tx_prepare_skb+0x1f8/0x248 [mac80211]) [ 39.479334] [<7f178c40>] (ieee80211_tx_prepare_skb [mac80211]) from [<7f179e28>] (__ieee80211_subif_start_xmit+0x32c/0x3d4 [mac80211]) [ 39.491053] [<7f179e28>] (__ieee80211_subif_start_xmit [mac80211]) from [<7f17af08>] (ieee80211_tx_control_port+0x19c/0x288 [mac80211]) [ 39.502946] [<7f17af08>] (ieee80211_tx_control_port [mac80211]) from [<7f0fc704>] (nl80211_tx_control_port+0x174/0x1d4 [cfg80211]) [ 39.515017] [<7f0fc704>] (nl80211_tx_control_port [cfg80211]) from [<808ceac4>] (genl_rcv_msg+0x154/0x340) [ 39.526814] [<808ceac4>] (genl_rcv_msg) from [<808cdb74>] (netlink_rcv_skb+0xb8/0x11c) [ 39.536446] [<808cdb74>] (netlink_rcv_skb) from [<808ce1d0>] (genl_rcv+0x28/0x34) [ 39.544344] [<808ce1d0>] (genl_rcv) from [<808cd234>] (netlink_unicast+0x174/0x274) [ 39.551895] [<808cd234>] (netlink_unicast) from [<808cd510>] (netlink_sendmsg+0x1dc/0x440) [ 39.559362] [<808cd510>] (netlink_sendmsg) from [<808596e0>] (____sys_sendmsg+0x1a8/0x1fc) [ 39.567697] [<808596e0>] (____sys_sendmsg) from [<8085b1a8>] (___sys_sendmsg+0xa4/0xdc) [ 39.575941] [<8085b1a8>] (___sys_sendmsg) from [<8085b310>] (sys_sendmsg+0x44/0x74) [ 39.583841] [<8085b310>] (sys_sendmsg) from [<80300060>] (ret_fast_syscall+0x0/0x40) ... [ 39.620734] Code: bad PC value [ 39.625869] ---[ end trace 8aef983ad3cbc032 ]--- Fixes: ba60f2793d3a ("wifi: ath11k: initialize hw_ops for IPQ5018") Signed-off-by: Ziyang Huang <hzyitc@outlook.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/TYZPR01MB5556D6E3F63EAB5129D11420C953A@TYZPR01MB5556.apcprd01.prod.exchangelabs.com
2023-06-16wifi: ath11k: Restart firmware after cold boot calibration for IPQ5018Ziyang Huang
Restart is required after cold boot calibration on IPQ5018. Otherwise, we get the following exception: [ 14.412829] qcom-q6-mpd cd00000.remoteproc: fatal error received: err_smem_ver.2.1: [ 14.412829] QC Image Version : QC_IMAGE_VERSION_STRING=WLAN.HK.2.6.0.1-00974-QCAHKSWPL_SILICONZ-1 [ 14.412829] Image Variant : IMAGE_VARIANT_STRING=5018.wlanfw2.map_spr_spr_evalQ [ 14.412829] DALSysLogEvent.c:174 Assertion 0 failed param0 :zero,param1 :zero,param2 :zero [ 14.412829] Thread ID : 0x00000048 Thread name : WLAN RT0 Process ID : 0x00000001 Process name :wlan0 [ 14.412829] [ 14.412829] Registers: [ 14.412829] SP : 0x4c81c120 [ 14.412829] FP : 0x4c81c138 [ 14.412829] PC : 0xb022c590 [ 14.412829] SSR : 0x00000000 [ 14.412829] BADVA : 0x00000000 [ 14.412829] LR : 0xb0008490 [ 14.412829] [ 14.412829] StackDump [ 14.412829] from:0x4c81c120 [ 14.412829] to: 0x00000000: [ 14.412829] [ 14.463006] remoteproc remoteproc0: crash detected in cd00000.remoteproc: type fatal error Fixes: 8dfe875aa24a ("wifi: ath11k: update hw params for IPQ5018") Signed-off-by: Ziyang Huang <hzyitc@outlook.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/TYZPR01MB55566969818BD4B49E770445C953A@TYZPR01MB5556.apcprd01.prod.exchangelabs.com
2023-06-16wifi: ath11k: Add missing ops config for IPQ5018 in ath11k_ahb_probe()Ziyang Huang
Without this patch, the IPQ5018 WiFi will fail and print the following logs: [ 11.033179] ath11k c000000.wifi: unsupported device type 7 [ 11.033223] ath11k: probe of c000000.wifi failed with error -95 Fixes: 25edca7bb18a ("wifi: ath11k: add ipq5018 device support") Signed-off-by: Ziyang Huang <hzyitc@outlook.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/TYZPR01MB5556D7AA10ABEDDDD2D8F39EC953A@TYZPR01MB5556.apcprd01.prod.exchangelabs.com
2023-06-15wifi: ath11k: Add missing check for ioremapJiasheng Jiang
Add check for ioremap() and return the error if it fails in order to guarantee the success of ioremap(), same as in ath11k_qmi_load_file_target_mem(). Fixes: 6ac04bdc5edb ("ath11k: Use reserved host DDR addresses from DT for PCI devices") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230608022858.27405-1-jiasheng@iscas.ac.cn
2023-06-13wifi: ath11k: fix memory leak in WMI firmware statsP Praneesh
Memory allocated for firmware pdev, vdev and beacon statistics are not released during rmmod. Fix it by calling ath11k_fw_stats_free() function before hardware unregister. While at it, avoid calling ath11k_fw_stats_free() while processing the firmware stats received in the WMI event because the local list is getting spliced and reinitialised and hence there are no elements in the list after splicing. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230606091128.14202-1-quic_adisi@quicinc.com
2023-06-13wifi: ath11k: debug: add ATH11K_DBG_CEKalle Valo
Add a new debug level for CE so that we don't need to use AHB level in ce.c. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230609142440.24643-16-kvalo@kernel.org
2023-06-13wifi: ath11k: htc: cleanup debug messagesKalle Valo
Cleanup HTC debug messages to follow the preferred style and try to make them more readable. Also add a few more and remove unnecessary. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230609142440.24643-15-kvalo@kernel.org
2023-06-13wifi: ath11k: don't use %pKKalle Valo
According to Documentation/core-api/printk-formats.rst %pK should not be used with printk(), so switch back to using just %p. printk() will hash the address so addresses are not leaked to user space. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230609142440.24643-14-kvalo@kernel.org
2023-06-13wifi: ath11k: hal: cleanup debug messageKalle Valo
Fix the debug message to follow the preferred style. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230609142440.24643-13-kvalo@kernel.org
2023-06-13wifi: ath11k: debug: use all upper case in ATH11k_DBG_HALKalle Valo
Somehow the character 'k' in ATH11k_DBG_HAL was in lower case. Change it to upper case. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230609142440.24643-12-kvalo@kernel.org
2023-06-13wifi: ath11k: dp: cleanup debug messageKalle Valo
Merge the two debug messages into and fix them to follow the preferred style. Also change the log level to ATH11K_DBG_DP_TX to match the filename. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230609142440.24643-11-kvalo@kernel.org
2023-06-13wifi: ath11k: pci: cleanup debug loggingKalle Valo
For better readability fix PCI debug messages to follow the preferred style. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230609142440.24643-10-kvalo@kernel.org
2023-06-13wifi: ath11k: wmi: add unified command debug messagesKalle Valo
Add debug messages for every command and cleanup the existing ones to make them all follow the same style. For better readability start every message with "cmd". Print the debug message after a successful ath11k_wmi_cmd_send() call. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230609142440.24643-9-kvalo@kernel.org
2023-06-13wifi: ath11k: wmi: use common error handling styleKalle Valo
Also these functions don't follow the preferred style so fix those. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230609142440.24643-8-kvalo@kernel.org
2023-06-13wifi: ath11k: wmi: cleanup error handling in ath11k_wmi_send_init_country_cmd()Kalle Valo
The error handling doesn't follow the preferred style so fix that. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230609142440.24643-7-kvalo@kernel.org
2023-06-13wifi: ath11k: remove unsupported event handlersKalle Valo
Now that we have a default handler there's no need anymore to list every unsupported event id anymore, so remove that to clean this up. While at it remove the pointless todo comment and change the debug message to follow the preferred style. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230609142440.24643-6-kvalo@kernel.org
2023-06-13wifi: ath11k: add WMI event debug messagesKalle Valo
Add a debug message for every WMI event to make it easier track what's happening in WMI. For better readability start every debug message with "event". Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230609142440.24643-5-kvalo@kernel.org
2023-06-13wifi: ath11k: remove manual mask names from debug messagesKalle Valo
Now that the previous patch changed ath11k_dbg() to print the debug level there's no need to have the level in the actual message anymore. So remove those. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230609142440.24643-4-kvalo@kernel.org
2023-06-13wifi: ath11k: print debug level in debug messagesKalle Valo
To make it easier understand the context of a debug message print the debug level before the actual message. An example: [21867.231900] ath11k_pci 0000:06:00.0: wmi processed regulatory ext channel list The tracepoint call is not modified, it's better to userspace print the debug level if needed. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230609142440.24643-3-kvalo@kernel.org
2023-06-13wifi: ath11k: debug: remove unused ATH11K_DBG_ANYKalle Valo
It's not used anywhere so can be easily removed. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230609142440.24643-2-kvalo@kernel.org
2023-06-09wifi: ath11k: update proper pdev/vdev id for testmode commandVenkateswara Naralasetty
User can extend test mode command support to set vdev and pdev params for debug purpose at run time by sending vdev/pdev param set command through the testmode command interface. Fill the proper pdev/vdev id in driver since, pdev/vdev id details may not be available at user space. It will make sure that the proper vdev/pdev ids are sent to firmware. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Venkateswara Naralasetty <quic_vnaralas@quicinc.com> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230601143214.13006-1-quic_rajkbhag@quicinc.com
2023-06-01wifi: ath11k: Add HTT stats for PHY reset caseNidhi Jain
New HTT stats are added with stats type 37 to provide PHY reset stats and PHY reset counter stats. PHY reset stats are used to display the current PHY-related operation information such as band, CCA threshold, current operating channel etc., PHY reset counter stats are used to display the PHY reset counter values like calibration counts, temperature based recalibration counts etc., Usage: echo 37 > /sys/kernel/debug/ieee80211/phyX/ath11k/htt_stats_type cat /sys/kernel/debug/ieee80211/phyx/ath11k/htt_stats Output: HTT_PHY_RESET_STATS_TLV: pdev_id = 0 chan_mhz = 5180 chan_band_center_freq1 = 5210 chan_band_center_freq2 = 0 chan_phy_mode = 18 chan_flags = 0x8 chan_num = 36 reset_cause = 0x50000 prev_reset_cause = 0x50000 phy_warm_reset_src = 0x0 rx_gain_tbl_mode = 0 xbar_val = 0xfac688 force_calibration = 0 phyrf_mode = 0 phy_homechan = 0 phy_tx_ch_mask = 0x3 phy_rx_ch_mask = 0x3 phybb_ini_mask = 0x5 phyrf_ini_mask = 0x0 phy_dfs_en_mask = 0x0 phy_sscan_en_mask = 0x0 phy_synth_sel_mask = 0x0 phy_adfs_freq = 0 cck_fir_settings = 0x0 phy_dyn_pri_chan = 6 cca_thresh = 0x26232020 dyn_cca_status = 0 rxdesense_thresh_hw = 0xcfe0afe rxdesense_thresh_sw = 0xcfe0afe HTT_PHY_RESET_COUNTERS_TLV: pdev_id = 0 cf_active_low_fail_cnt = 0 cf_active_low_pass_cnt = 0 phy_off_through_vreg_cnt = 0 force_calibration_cnt = 0 rf_mode_switch_phy_off_cnt = 0 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Nidhi Jain <quic_nidhjain@quicinc.com> Signed-off-by: Maharaja Kennadyrajan <quic_mkenna@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230517141242.2754293-1-quic_mkenna@quicinc.com
2023-06-01wifi: ath11k: Allow ath11k to boot without caldata in ftm modeSowmiya Sree Elavalagan
Currently, if ath11k is unable to load the calibration data file it will always exit. However the calibration data may not be present in factory test mode, so update the logic to allow the driver to execute in FTM mode even if downloading the calibration data fails. Tested-on : IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sowmiya Sree Elavalagan <quic_ssreeela@quicinc.com> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230517135934.16408-5-quic_rajkbhag@quicinc.com
2023-06-01wifi: ath11k: factory test mode supportGovindaraj Saminathan
Add support to process factory test mode commands (FTM) for calibration. By default firmware start with NORMAL mode and to process the FTM commands firmware needs to be restarted in FTM mode using module parameter ftm_mode. The pre-request is all the radios should be down before starting the test. When start command ATH11K_TM_CMD_TESTMODE_START is received, ar->state is set to Test Mode. If the FTM command or event length is greater than 256 bytes, it will be broken down into multiple segments and encoded with TLV header if it is segmented commands, else it is sent to firmware as it is. On receiving UTF event from firmware, if it is segmented event, the driver will wait until it receives all the segments and notify the complete data to user application. In case the segmented sequence are missed or lost from the firmware, driver will skip the already received partial data. In case of unsegmented UTF event from firmware, driver notifies the data to the user application as it comes. Applications handles the data further. Command to boot in ftm mode: insmod ath11k ftm_mode=1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Govindaraj Saminathan <quic_gsaminat@quicinc.com> Co-developed-by: Sowmiya Sree Elavalagan <quic_ssreeela@quicinc.com> Signed-off-by: Sowmiya Sree Elavalagan <quic_ssreeela@quicinc.com> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230517135934.16408-4-quic_rajkbhag@quicinc.com
2023-06-01wifi: ath11k: remove unused function ath11k_tm_event_wmi()Govindaraj Saminathan
The function ath11k_tm_event_wmi() is only defined and it is not used anywhere. Hence remove the unused. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Govindaraj Saminathan <quic_gsaminat@quicinc.com> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230517135934.16408-2-quic_rajkbhag@quicinc.com
2023-06-01wifi: ath11k: add support default regdb while searching board-2.bin for WCN6855Wen Gong
Sometimes board-2.bin does not have the regdb data which matched the parameters such as vendor, device, subsystem-vendor, subsystem-device and etc. Add default regdb data with 'bus=%s' into board-2.bin for WCN6855, then ath11k use 'bus=pci' to search regdb data in board-2.bin for WCN6855. kernel: [ 122.515808] ath11k_pci 0000:03:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' kernel: [ 122.517240] ath11k_pci 0000:03:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 6179564 kernel: [ 122.517280] ath11k_pci 0000:03:00.0: failed to fetch regdb data for bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262 from ath11k/WCN6855/hw2.0/board-2.bin kernel: [ 122.517464] ath11k_pci 0000:03:00.0: boot using board name 'bus=pci' kernel: [ 122.518901] ath11k_pci 0000:03:00.0: boot firmware request ath11k/WCN6855/hw2.0/board-2.bin size 6179564 kernel: [ 122.518915] ath11k_pci 0000:03:00.0: board name kernel: [ 122.518917] ath11k_pci 0000:03:00.0: 00000000: 62 75 73 3d 70 63 69 bus=pci kernel: [ 122.518918] ath11k_pci 0000:03:00.0: boot found match regdb data for name 'bus=pci' kernel: [ 122.518920] ath11k_pci 0000:03:00.0: boot found regdb data for 'bus=pci' kernel: [ 122.518921] ath11k_pci 0000:03:00.0: fetched regdb Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230517133959.8224-1-quic_wgong@quicinc.com
2023-05-18wifi: ath10/11/12k: Use alloc_ordered_workqueue() to create ordered workqueuesTejun Heo
BACKGROUND ========== When multiple work items are queued to a workqueue, their execution order doesn't match the queueing order. They may get executed in any order and simultaneously. When fully serialized execution - one by one in the queueing order - is needed, an ordered workqueue should be used which can be created with alloc_ordered_workqueue(). However, alloc_ordered_workqueue() was a later addition. Before it, an ordered workqueue could be obtained by creating an UNBOUND workqueue with @max_active==1. This originally was an implementation side-effect which was broken by 4c16bd327c74 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered"). Because there were users that depended on the ordered execution, 5c0338c68706 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered") made workqueue allocation path to implicitly promote UNBOUND workqueues w/ @max_active==1 to ordered workqueues. While this has worked okay, overloading the UNBOUND allocation interface this way creates other issues. It's difficult to tell whether a given workqueue actually needs to be ordered and users that legitimately want a min concurrency level wq unexpectedly gets an ordered one instead. With planned UNBOUND workqueue updates to improve execution locality and more prevalence of chiplet designs which can benefit from such improvements, this isn't a state we wanna be in forever. This patch series audits all callsites that create an UNBOUND workqueue w/ @max_active==1 and converts them to alloc_ordered_workqueue() as necessary. WHAT TO LOOK FOR ================ The conversions are from alloc_workqueue(WQ_UNBOUND | flags, 1, args..) to alloc_ordered_workqueue(flags, args...) which don't cause any functional changes. If you know that fully ordered execution is not ncessary, please let me know. I'll drop the conversion and instead add a comment noting the fact to reduce confusion while conversion is in progress. If you aren't fully sure, it's completely fine to let the conversion through. The behavior will stay exactly the same and we can always reconsider later. As there are follow-up workqueue core changes, I'd really appreciate if the patch can be routed through the workqueue tree w/ your acks. Thanks. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Kalle Valo <kvalo@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org
2023-05-17Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for v6.5. Major changes: ath11k * Multiple Basic Service Set Identifier (MBSSID) and Enhanced MBSSID Advertisement (EMA) support in AP mode
2023-05-17wifi: ath11k: Send HT fixed rate in WMI peer fixed paramMaharaja Kennadyrajan
Due to the firmware behavior with HT fixed rate setting, HT fixed rate MCS with NSS > 1 are treated as NSS = 1 HT rates in the firmware and enables the HT fixed rate of NSS = 1. This leads to HT fixed rate is always configured for NSS = 1 even though the user sets NSS = 2 or > 1 HT fixed MCS in the set bitrate command. Currently HT fixed MCS is sent via WMI peer assoc command. Fix this issue, by sending the HT fixed rate MCS in WMI peer fixed param instead of sending in peer assoc command. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Maharaja Kennadyrajan <quic_mkenna@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230504092033.3542456-3-quic_mkenna@quicinc.com
2023-05-17wifi: ath11k: Relocate the func ath11k_mac_bitrate_mask_num_ht_rates() and ↵Maharaja Kennadyrajan
change hweight16 to hweight8 Relocate the function ath11k_mac_bitrate_mask_num_ht_rates() definition to call this function from other functions which helps to avoid the compilation error (function not defined). ht_mcs[] is 1 byte array and it is enough to use hweight8() instead of hweight16(). Hence, fixed the same. Tested on: Compile tested only. Signed-off-by: Maharaja Kennadyrajan <quic_mkenna@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230504092033.3542456-2-quic_mkenna@quicinc.com
2023-05-09wifi: ath11k: EMA beacon supportAloka Dixit
Add new function ath11k_mac_setup_bcn_tmpl_ema() which invokes the new API provided by MAC80211 to retrieve EMA beacons. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Co-developed-by: John Crispin <john@phrozen.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230405221648.17950-8-quic_alokad@quicinc.com
2023-05-09wifi: ath11k: MBSSID beacon supportAloka Dixit
- Split ath11k_mac_setup_bcn_tmpl() to move the beacon retrieval and WMI command to a new function, ath11k_mac_setup_bcn_tmpl_legacy(). In the original function add checks to use the transmitting interface when MBSSID is enabled. - Set rsnie_present and wpaie_present fields for the non-transmitting interfaces when MBSSID is enabled. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Co-developed-by: John Crispin <john@phrozen.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230405221648.17950-7-quic_alokad@quicinc.com
2023-05-09wifi: ath11k: refactor vif parameter configurationsAloka Dixit
Security parameters for each non-transmitting profile can be different when MBSSID is enabled and this information is included in the MBSSID element in the Beacon frame. Current implementation to set rsnie_present and wpaie_present does not parse this element hence it applies only to the transmitting interface. Move the code to a separate function to make additions for non-transmitting interfaces cleaner. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230405221648.17950-6-quic_alokad@quicinc.com
2023-05-09wifi: ath11k: MBSSID parameter configuration in AP modeAloka Dixit
Include MBSSID parameters in WMI vdev up operation. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Co-developed-by: John Crispin <john@phrozen.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230405221648.17950-5-quic_alokad@quicinc.com
2023-05-09wifi: ath11k: rename MBSSID fields in wmi_vdev_up_cmdAloka Dixit
Rename trans_bssid to tx_vdev_bssid to make it similar to vdev_bssid. Rename profile_num to nontx_profile_cnt, and profile_idx to nontx_profile_idx which makes it clear that these store configurations related to MBSSID non-transmitting profiles. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230405221648.17950-4-quic_alokad@quicinc.com
2023-05-09wifi: ath11k: MBSSID configuration during vdev create/startAloka Dixit
Configure multiple BSSID flags and index of the transmitting interface in vdev create/start commands depending on the service bit WMI_TLV_SERVICE_MBSS_PARAM_IN_VDEV_START_SUPPORT. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Co-developed-by: John Crispin <john@phrozen.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230405221648.17950-3-quic_alokad@quicinc.com
2023-05-09wifi: ath11k: driver settings for MBSSID and EMAAloka Dixit
Advertise the driver support for multiple BSSID (MBSSID) and enhanced multi-BSSID advertisements (EMA) by setting extended capabilities. Configure mbssid_max_interfaces and ema_max_profile_periodicity fields in structure wiphy which are used to advertise maximum number of interfaces and profile periodicity supported by the driver. Add new WMI fields to configure maximum vdev count supported for MBSSID and profile periodicity in case of EMA. Setting WMI_RSRC_CFG_FLAG2_CALC_NEXT_DTIM_COUNT_SET flag indicates that the firmware should track and update the DTIM counts for each non-transmitted profile. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Co-developed-by: John Crispin <john@phrozen.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230405221648.17950-2-quic_alokad@quicinc.com
2023-05-09wifi: ath: work around false-positive stringop-overread warningArnd Bergmann
In a rare arm64 randconfig build, I got multiple warnings for ath11k and ath12k: In function 'ath11k_peer_assoc_h_ht', inlined from 'ath11k_peer_assoc_prepare' at drivers/net/wireless/ath/ath11k/mac.c:2665:2: drivers/net/wireless/ath/ath11k/mac.c:1709:13: error: 'ath11k_peer_assoc_h_ht_masked' reading 10 bytes from a region of size 0 [-Werror=stringop-overread] 1709 | if (ath11k_peer_assoc_h_ht_masked(ht_mcs_mask)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ This happens whenever gcc-13 fails to inline one of the functions that take a fixed-length array argument but gets passed a pointer. Change these functions to all take a regular pointer argument instead. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230417205447.1800912-1-arnd@kernel.org
2023-05-05wifi: ath11k: Use list_count_nodes()Christophe JAILLET
ath11k_wmi_fw_stats_num_vdevs() and ath11k_wmi_fw_stats_num_bcn() really look the same as list_count_nodes(), so use the latter instead of hand writing it. The first ones use list_for_each_entry() and the other list_for_each(), but they both count the number of nodes in the list. While at it, also remove to prototypes of non-existent functions. Based on the names and prototypes, it is likely that they should be equivalent to list_count_nodes(). Compile tested only. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/941484caae24b89d20524b1a5661dd1fd7025492.1682542084.git.christophe.jaillet@wanadoo.fr
2023-04-28wifi: ath11k: fix registration of 6Ghz-only phy without the full channel rangeMaxime Bizon
Because of what seems to be a typo, a 6Ghz-only phy for which the BDF does not allow the 7115Mhz channel will fail to register: WARNING: CPU: 2 PID: 106 at net/wireless/core.c:907 wiphy_register+0x914/0x954 Modules linked in: ath11k_pci sbsa_gwdt CPU: 2 PID: 106 Comm: kworker/u8:5 Not tainted 6.3.0-rc7-next-20230418-00549-g1e096a17625a-dirty #9 Hardware name: Freebox V7R Board (DT) Workqueue: ath11k_qmi_driver_event ath11k_qmi_driver_event_work pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : wiphy_register+0x914/0x954 lr : ieee80211_register_hw+0x67c/0xc10 sp : ffffff800b123aa0 x29: ffffff800b123aa0 x28: 0000000000000000 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000006 x24: ffffffc008d51418 x23: ffffffc008cb0838 x22: ffffff80176c2460 x21: 0000000000000168 x20: ffffff80176c0000 x19: ffffff80176c03e0 x18: 0000000000000014 x17: 00000000cbef338c x16: 00000000d2a26f21 x15: 00000000ad6bb85f x14: 0000000000000020 x13: 0000000000000020 x12: 00000000ffffffbd x11: 0000000000000208 x10: 00000000fffffdf7 x9 : ffffffc009394718 x8 : ffffff80176c0528 x7 : 000000007fffffff x6 : 0000000000000006 x5 : 0000000000000005 x4 : ffffff800b304284 x3 : ffffff800b304284 x2 : ffffff800b304d98 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: wiphy_register+0x914/0x954 ieee80211_register_hw+0x67c/0xc10 ath11k_mac_register+0x7c4/0xe10 ath11k_core_qmi_firmware_ready+0x1f4/0x570 ath11k_qmi_driver_event_work+0x198/0x590 process_one_work+0x1b8/0x328 worker_thread+0x6c/0x414 kthread+0x100/0x104 ret_from_fork+0x10/0x20 ---[ end trace 0000000000000000 ]--- ath11k_pci 0002:01:00.0: ieee80211 registration failed: -22 ath11k_pci 0002:01:00.0: failed register the radio with mac80211: -22 ath11k_pci 0002:01:00.0: failed to create pdev core: -22 Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230421145445.2612280-1-mbizon@freebox.fr
2023-04-21Merge tag 'wireless-next-2023-04-21' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.4 Most likely the last -next pull request for v6.4. We have changes all over. rtw88 now supports SDIO bus and iwlwifi continues to work on Wi-Fi 7 support. Not much stack changes this time. Major changes: cfg80211/mac80211 - fix some Fine Time Measurement (FTM) frames not being bufferable - flush frames before key removal to avoid potential unencrypted transmission depending on the hardware design iwlwifi - preparation for Wi-Fi 7 EHT and multi-link support rtw88 - SDIO bus support - RTL8822BS, RTL8822CS and RTL8821CS SDIO chipset support rtw89 - framework firmware backwards compatibility brcmfmac - Cypress 43439 SDIO support mt76 - mt7921 P2P support - mt7996 mesh A-MSDU support - mt7996 EHT support - mt7996 coredump support wcn36xx - support for pronto v3 hardware ath11k - PCIe DeviceTree bindings - WCN6750: enable SAR support ath10k - convert DeviceTree bindings to YAML * tag 'wireless-next-2023-04-21' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (261 commits) wifi: rtw88: Update spelling in main.h wifi: airo: remove ISA_DMA_API dependency wifi: rtl8xxxu: Simplify setting the initial gain wifi: rtl8xxxu: Add rtl8xxxu_write{8,16,32}_{set,clear} wifi: rtl8xxxu: Don't print the vendor/product/serial wifi: rtw88: Fix memory leak in rtw88_usb wifi: rtw88: call rtw8821c_switch_rf_set() according to chip variant wifi: rtw88: set pkg_type correctly for specific rtw8821c variants wifi: rtw88: rtw8821c: Fix rfe_option field width wifi: rtw88: usb: fix priority queue to endpoint mapping wifi: rtw88: 8822c: add iface combination wifi: rtw88: handle station mode concurrent scan with AP mode wifi: rtw88: prevent scan abort with other VIFs wifi: rtw88: refine reserved page flow for AP mode wifi: rtw88: disallow PS during AP mode wifi: rtw88: 8822c: extend reserved page number wifi: rtw88: add port switch for AP mode wifi: rtw88: add bitmap for dynamic port settings wifi: rtw89: mac: use regular int as return type of DLE buffer request wifi: mac80211: remove return value check of debugfs_create_dir() ... ==================== Link: https://lore.kernel.org/r/20230421104726.800BCC433D2@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-19wifi: ath11k: Remove disabling of 80+80 and 160 MHzMuna Sinada
This is a regression fix for 80+80 and 160 MHz support bits being cleared, therefore not adverised. Remove disable of 80+80 and 160 MHz capability flags and assign valid center frequency 2 similar to VHT80_80. Fixes: 38dfe775d0ab ("wifi: ath11k: push MU-MIMO params from hostapd to hardware") Reported-by: Robert Marko <robert.marko@sartura.hr> Tested-by: Robert Marko <robert.marko@sartura.hr> # IPQ8074 WLAN.HK.2.9.0.1-01385-QCAHKSWPL_SILICONZ-1 Link: https://bugzilla.kernel.org/show_bug.cgi?id=217299 Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: Muna Sinada <quic_msinada@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/1681762947-13882-1-git-send-email-quic_msinada@quicinc.com
2023-04-19wifi: ath11k: Fix SKB corruption in REO destination ringNagarajan Maran
While running traffics for a long time, randomly an RX descriptor filled with value "0" from REO destination ring is received. This descriptor which is invalid causes the wrong SKB (SKB stored in the IDR lookup with buffer id "0") to be fetched which in turn causes SKB memory corruption issue and the same leads to crash after some time. Changed the start id for idr allocation to "1" and the buffer id "0" is reserved for error validation. Introduced Sanity check to validate the descriptor, before processing the SKB. Crash Signature : Unable to handle kernel paging request at virtual address 3f004900 PC points to "b15_dma_inv_range+0x30/0x50" LR points to "dma_cache_maint_page+0x8c/0x128". The Backtrace obtained is as follows: [<8031716c>] (b15_dma_inv_range) from [<80313a4c>] (dma_cache_maint_page+0x8c/0x128) [<80313a4c>] (dma_cache_maint_page) from [<80313b90>] (__dma_page_dev_to_cpu+0x28/0xcc) [<80313b90>] (__dma_page_dev_to_cpu) from [<7fb5dd68>] (ath11k_dp_process_rx+0x1e8/0x4a4 [ath11k]) [<7fb5dd68>] (ath11k_dp_process_rx [ath11k]) from [<7fb53c20>] (ath11k_dp_service_srng+0xb0/0x2ac [ath11k]) [<7fb53c20>] (ath11k_dp_service_srng [ath11k]) from [<7f67bba4>] (ath11k_pci_ext_grp_napi_poll+0x1c/0x78 [ath11k_pci]) [<7f67bba4>] (ath11k_pci_ext_grp_napi_poll [ath11k_pci]) from [<807d5cf4>] (__napi_poll+0x28/0xb8) [<807d5cf4>] (__napi_poll) from [<807d5f28>] (net_rx_action+0xf0/0x280) [<807d5f28>] (net_rx_action) from [<80302148>] (__do_softirq+0xd0/0x280) [<80302148>] (__do_softirq) from [<80320408>] (irq_exit+0x74/0xd4) [<80320408>] (irq_exit) from [<803638a4>] (__handle_domain_irq+0x90/0xb4) [<803638a4>] (__handle_domain_irq) from [<805bedec>] (gic_handle_irq+0x58/0x90) [<805bedec>] (gic_handle_irq) from [<80301a78>] (__irq_svc+0x58/0x8c) Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Nagarajan Maran <quic_nmaran@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230403191533.28114-1-quic_nmaran@quicinc.com
2023-04-19wifi: ath11k: Fix incorrect update of radiotap fieldsPradeep Kumar Chitrapu
Fix incorrect update of ppdu stats causing incorrect radiotap fields. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230403195738.25367-3-quic_pradeepc@quicinc.com
2023-04-19wifi: ath11k: fix tx status reporting in encap offload modePradeep Kumar Chitrapu
ieee80211_tx_status() treats packets in 802.11 frame format and tries to extract sta address from packet header. When tx encap offload is enabled, this becomes invalid operation. Hence, switch to using ieee80211_tx_status_ext() after filling in station address for handling both 802.11 and 802.3 frames. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230403195738.25367-2-quic_pradeepc@quicinc.com
2023-04-19wifi: ath11k: add peer mac information in failure casesHarshitha Prem
During reo command failure, the peer mac detail for which the reo command was not successful is unknown. Hence, to improve the debuggability, add the peer mac information in the failure cases which would be useful during multi client cases. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sathishkumar Muruganandam <quic_murugana@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230403182420.23375-4-quic_hprem@quicinc.com
2023-04-19wifi: ath11k: Prevent REO cmd failuresHarshitha Prem
Prevent REO cmd failures causing double free by increasing REO cmd ring size and moving REO status ring mask to IRQ group 3 from group 0 to separate from tx completion ring on IRQ group 0 which may delay reo status processing. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sathishkumar Muruganandam <quic_murugana@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230403182420.23375-3-quic_hprem@quicinc.com
2023-04-19wifi: ath11k: fix double free of peer rx_tid during reo cmd failureHarshitha Prem
Peer rx_tid is locally copied thrice during peer_rx_tid_cleanup to send REO_CMD_UPDATE_RX_QUEUE followed by REO_CMD_FLUSH_CACHE to flush all aged REO descriptors from HW cache. When sending REO_CMD_FLUSH_CACHE fails, we do dma unmap of already mapped rx_tid->vaddr and free it. This is not checked during reo_cmd_list_cleanup() and dp_reo_cmd_free() before trying to free and unmap again. Fix this by setting rx_tid->vaddr NULL in rx tid delete and also wherever freeing it to check in reo_cmd_list_cleanup() and reo_cmd_free() before trying to free again. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sathishkumar Muruganandam <quic_murugana@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230403182420.23375-2-quic_hprem@quicinc.com
2023-04-17wifi: ath11k: fix undefined behavior with __fls in dpHarshitha Prem
"__fls" would have an undefined behavior if the argument is passed as "0". Hence, added changes to handle the same. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Nagarajan Maran <quic_nmaran@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230403184155.8670-3-quic_nmaran@quicinc.com
generated by cgit (git 2.34.1) at 2025-07-18 12:35:49 +0000