summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath11k
AgeCommit message (Collapse)Author
2023-04-17wifi: ath11k: Ignore frags from uninitialized peer in dp.Harshitha Prem
When max virtual ap interfaces are configured in all the bands with ACS and hostapd restart is done every 60s, a crash is observed at random times. In this certain scenario, a fragmented packet is received for self peer, for which rx_tid and rx_frags are not initialized in datapath. While handling this fragment, crash is observed as the rx_frag list is uninitialised and when we walk in ath11k_dp_rx_h_sort_frags, skb null leads to exception. To address this, before processing received fragments we check dp_setup_done flag is set to ensure that peer has completed its dp peer setup for fragment queue, else ignore processing the fragments. Call trace: ath11k_dp_process_rx_err+0x550/0x1084 [ath11k] ath11k_dp_service_srng+0x70/0x370 [ath11k] 0xffffffc009693a04 __napi_poll+0x30/0xa4 net_rx_action+0x118/0x270 __do_softirq+0x10c/0x244 irq_exit+0x64/0xb4 __handle_domain_irq+0x88/0xac gic_handle_irq+0x74/0xbc el1_irq+0xf0/0x1c0 arch_cpu_idle+0x10/0x18 do_idle+0x104/0x248 cpu_startup_entry+0x20/0x64 rest_init+0xd0/0xdc arch_call_rest_init+0xc/0x14 start_kernel+0x480/0x4b8 Code: f9400281 f94066a2 91405021 b94a0023 (f9406401) Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Nagarajan Maran <quic_nmaran@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230403184155.8670-2-quic_nmaran@quicinc.com
2023-04-17wifi: ath11k: print a warning when crypto_alloc_shash() failsKalle Valo
Christoph reported that ath11k failed to initialise when michael_mic.ko module was not installed. To make it easier to notice that case print a warning when crypto_alloc_shash() fails. Compile tested only. Reported-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/all/20221130133016.GC3055@lst.de/ Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230405090425.1351-1-kvalo@kernel.org
2023-04-17wifi: ath11k: pci: Add more MODULE_FIRMWARE() entriesTakashi Iwai
As there are a few more models supported by the driver, let's add the missing MODULE_FIRMWARE() entries for them. The lack of them resulted in the missing device enablement on some systems, such as the installation image of openSUSE. While we are at it, use the wildcard instead of listing each firmware files individually for each. Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230330143718.19511-1-tiwai@suse.de
2023-04-17wifi: ath11k: enable SAR support on WCN6750Youghandhar Chintala
Currently, SAR is enabled only on WCN6855, enable this for WCN6750 too. This functionality gets triggered, when the user space application calls NL80211_CMD_SET_SAR_SPECS. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Signed-off-by: Youghandhar Chintala <quic_youghand@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230328113455.11252-1-quic_youghand@quicinc.com
2023-04-17wifi: ath11k: Disable Spectral scan upon removing interfaceTamizh Chelvam Raja
Host might receive spectral events during interface down sequence and this might create below errors. failed to handle dma buf release event -22 failed to handle dma buf release event -22 Fix this by disabling spectral config during remove interface. Tested-on: IPQ5018 hw1.0 AHB WLAN.HK.2.6.0.1-00861-QCAHKSWPL_SILICONZ-1 Signed-off-by: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230328071150.29645-1-quic_tamizhr@quicinc.com
2023-04-12wifi: ath11k: Remove redundant pci_clear_masterCai Huoqing
Remove pci_clear_master to simplify the code, the bus-mastering is also cleared in do_pci_disable_device, like this: ./drivers/pci/pci.c:2197 static void do_pci_disable_device(struct pci_dev *dev) { u16 pci_command; pci_read_config_word(dev, PCI_COMMAND, &pci_command); if (pci_command & PCI_COMMAND_MASTER) { pci_command &= ~PCI_COMMAND_MASTER; pci_write_config_word(dev, PCI_COMMAND, pci_command); } pcibios_disable_device(dev); }. And dev->is_busmaster is set to 0 in pci_disable_device. Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230323112613.7550-1-cai.huoqing@linux.dev
2023-04-12wifi: ath11k: Send 11d scan start before WMI_START_SCAN_CMDIDManikanta Pubbisetty
Firmwares advertising the support of triggering 11d algorithm on the scan results of a regular scan expects driver to send WMI_11D_SCAN_START_CMDID before sending WMI_START_SCAN_CMDID. Triggering 11d algorithm on the scan results of a normal scan helps in completely avoiding a separate 11d scan for determining regdomain. This indirectly helps in speeding up connections on station interfaces on the chipsets supporting 11D scan. To enable this feature, send WMI_11D_SCAN_START_CMDID just before sending WMI_START_SCAN_CMDID if the firmware advertises WMI_TLV_SERVICE_SUPPORT_11D_FOR_HOST_SCAN service flag. WCN6750 & WCN6855 supports this feature. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-01160-QCAMSLSWPLZ-1 Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230315161817.29627-1-quic_mpubbise@quicinc.com
2023-04-12wifi: ath11k: fix writing to unintended memory regionP Praneesh
While initializing spectral, the magic value is getting written to the invalid memory address leading to random boot-up crash. This occurs due to the incorrect index increment in ath11k_dbring_fill_magic_value function. Fix it by replacing the existing logic with memset32 to ensure there is no invalid memory access. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01838-QCAHKSWPL_SILICONZ-1 Fixes: d3d358efc553 ("ath11k: add spectral/CFR buffer validation support") Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230321052900.16895-1-quic_ppranees@quicinc.com
2023-04-12wifi: ath11k: Fix invalid management rx frame length issueBhagavathi Perumal S
The WMI management rx event has multiple arrays of TLVs, however the common WMI TLV parser won't handle multiple TLV tags of same type. So the multiple array tags of WMI management rx TLV is parsed incorrectly and the length calculated becomes wrong when the target sends multiple array tags. Add separate TLV parser to handle multiple arrays for WMI management rx TLV. This fixes invalid length issue when the target sends multiple array tags. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Nagarajan Maran <quic_nmaran@quicinc.com> Signed-off-by: Nagarajan Maran <quic_nmaran@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230320133840.30162-1-quic_nmaran@quicinc.com
2023-04-12wifi: ath11k: fix rssi station dump not updated in QCN9074P Praneesh
In QCN9074, station dump signal values display default value which is -95 dbm, since there is firmware header change for HAL_RX_MPDU_START between QCN9074 and IPQ8074 which cause wrong peer_id fetch from msdu. Fix this by updating hal_rx_mpdu_info with corresponding QCN9074 tlv format. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01695-QCAHKSWPL_SILICONZ-1 Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230320110312.20639-1-quic_ppranees@quicinc.com
2023-04-12wifi: ath11k: Configure the FTM responder role using firmware capability flagGanesh Babu Jothiram
Fine Time Measurement(FTM) is offloaded feature to firmware. Hence, the configuration of FTM responder role is done using firmware capability flag instead of hw param. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Ganesh Babu Jothiram <quic_gjothira@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230317072034.8217-1-quic_gjothira@quicinc.com
2023-04-12wifi: ath11k: Optimize 6 GHz scan timeManikanta Pubbisetty
Currently, time taken to scan all supported channels on WCN6750 is ~8 seconds and connection time is almost 10 seconds. WCN6750 supports three Wi-Fi bands (i.e., 2.4/5/6 GHz) and the numbers of channels for scan come around ~100 channels (default case). Since the chip doesn't have support for DBS (Dual Band Simultaneous), scans cannot be parallelized resulting in longer scan times. Among the 100 odd channels, ~60 channels are in 6 GHz band. Therefore, optimizing the scan for 6 GHz channels will bring down the overall scan time. WCN6750 firmware has support to scan a 6 GHz channel based on co-located AP information i.e., RNR IE which is found in the legacy 2.4/5 GHz scan results. When a scan request with all supported channel list is enqueued to the firmware, then based on WMI_SCAN_CHAN_FLAG_SCAN_ONLY_IF_RNR_FOUND scan channel flag, firmware will scan only those 6 GHz channels for which RNR IEs are found in the legacy scan results. In the proposed design, based on NL80211_SCAN_FLAG_COLOCATED_6GHZ scan flag, driver will set the WMI_SCAN_CHAN_FLAG_SCAN_ONLY_IF_RNR_FOUND flag for non-PSC channels. Since there is high probability to find 6 GHz APs on PSC channels, these channels are always scanned. Only non-PSC channels are selectively scanned based on cached RNR information from the legacy scan results. If NL80211_SCAN_FLAG_COLOCATED_6GHZ is not set in the scan flags, then scan will happen on all supported channels (default behavior). With these optimizations, scan time is improved by 1.5-1.8 seconds on WCN6750. Similar savings have been observed on WCN6855. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.16 Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230323060913.10097-1-quic_mpubbise@quicinc.com
2023-04-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Conflicts: drivers/net/ethernet/google/gve/gve.h 3ce934558097 ("gve: Secure enough bytes in the first TX desc for all TCP pkts") 75eaae158b1b ("gve: Add XDP DROP and TX support for GQI-QPL format") https://lore.kernel.org/all/20230406104927.45d176f5@canb.auug.org.au/ https://lore.kernel.org/all/c5872985-1a95-0bc8-9dcc-b6f23b439e9d@tessares.net/ Adjacent changes: net/can/isotp.c 051737439eae ("can: isotp: fix race between isotp_sendsmg() and isotp_release()") 96d1c81e6a04 ("can: isotp: add module parameter for maximum pdu size") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-03wifi: ath11k: reduce the MHI timeout to 20sKalle Valo
Currently ath11k breaks after hibernation, the reason being that ath11k expects that the wireless device will have power during suspend and the firmware will continue running. But of course during hibernation the power from the device is cut off and firmware is not running when resuming, so ath11k will fail. (The reason why ath11k needs the firmware running is the interaction between mac80211 and MHI stack, it's a long story and more info in the bugzilla report.) In SUSE kernels the watchdog timeout is reduced from the default 120 to 60 seconds: CONFIG_DPM_WATCHDOG_TIMEOUT=60 But as the ath11k MHI timeout is 90 seconds the kernel will crash before will ath11k will recover in resume callback. To avoid the crash reduce the MHI timeout to just 20 seconds. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.9 Link: https://bugzilla.kernel.org/show_bug.cgi?id=214649 Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230329162038.8637-1-kvalo@kernel.org
2023-03-22wifi: ath11k: fix BUFFER_DONE read on monitor ring rx bufferHarshitha Prem
Perform dma_sync_single_for_cpu() on monitor ring rx buffer before reading BUFFER_DONE tag and do dma_unmap_single() only after device had set BUFFER_DONE tag to the buffer. Also when BUFFER_DONE tag is not set, allow the buffer to get read next time without freeing skb. This helps to fix AP+Monitor VAP with flood traffic scenario to see monitor ring rx buffer overrun missing BUFFER_DONE tag to be set. Also remove redundant rx dma buf free performed on DP rx_mon_status_refill_ring. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sathishkumar Muruganandam <quic_murugana@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230309164434.32660-1-quic_hprem@quicinc.com
2023-03-15wifi: ath11k: fix deinitialization of firmware resourcesAditya Kumar Singh
Currently, in ath11k_ahb_fw_resources_init(), iommu domain mapping is done only for the chipsets having fixed firmware memory. Also, for such chipsets, mapping is done only if it does not have TrustZone support. During deinitialization, only if TrustZone support is not there, iommu is unmapped back. However, for non fixed firmware memory chipsets, TrustZone support is not there and this makes the condition check to true and it tries to unmap the memory which was not mapped during initialization. This leads to the following trace - [ 83.198790] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 [ 83.259537] Modules linked in: ath11k_ahb ath11k qmi_helpers .. snip .. [ 83.280286] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 83.287228] pc : __iommu_unmap+0x30/0x140 [ 83.293907] lr : iommu_unmap+0x5c/0xa4 [ 83.298072] sp : ffff80000b3abad0 .. snip .. [ 83.369175] Call trace: [ 83.376282] __iommu_unmap+0x30/0x140 [ 83.378541] iommu_unmap+0x5c/0xa4 [ 83.382360] ath11k_ahb_fw_resource_deinit.part.12+0x2c/0xac [ath11k_ahb] [ 83.385666] ath11k_ahb_free_resources+0x140/0x17c [ath11k_ahb] [ 83.392521] ath11k_ahb_shutdown+0x34/0x40 [ath11k_ahb] [ 83.398248] platform_shutdown+0x20/0x2c [ 83.403455] device_shutdown+0x16c/0x1c4 [ 83.407621] kernel_restart_prepare+0x34/0x3c [ 83.411529] kernel_restart+0x14/0x74 [ 83.415781] __do_sys_reboot+0x1c4/0x22c [ 83.419427] __arm64_sys_reboot+0x1c/0x24 [ 83.423420] invoke_syscall+0x44/0xfc [ 83.427326] el0_svc_common.constprop.3+0xac/0xe8 [ 83.430974] do_el0_svc+0xa0/0xa8 [ 83.435659] el0_svc+0x1c/0x44 [ 83.438957] el0t_64_sync_handler+0x60/0x144 [ 83.441910] el0t_64_sync+0x15c/0x160 [ 83.446343] Code: aa0103f4 f9400001 f90027a1 d2800001 (f94006a0) [ 83.449903] ---[ end trace 0000000000000000 ]--- This can be reproduced by probing an AHB chipset which is not having a fixed memory region. During reboot (or rmmod) trace can be seen. Fix this issue by adding a condition check on firmware fixed memory hw_param as done in the counter initialization function. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Fixes: f9eec4947add ("ath11k: Add support for targets without trustzone") Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230309095308.24937-1-quic_adisi@quicinc.com
2023-03-15wifi: ath11k: Replace fake flex-array with flexible-array memberGustavo A. R. Silva
Zero-length arrays as fake flexible arrays are deprecated and we are moving towards adopting C99 flexible-array members instead. Address 25 of the following warnings found with GCC-13 and -fstrict-flex-arrays=3 enabled: drivers/net/wireless/ath/ath11k/debugfs_htt_stats.c:30:51: warning: array subscript <unknown> is outside array bounds of ‘const u32[0]’ {aka ‘const unsigned int[]’} [-Warray-bounds=] This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays=3 [1]. Link: https://github.com/KSPP/linux/issues/21 Link: https://github.com/KSPP/linux/issues/266 Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1] Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/ZAe5L5DtmsQxzqRH@work
2023-03-13Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for v6.4. Major changes: ath10k * enable threaded napi on WCN3990 ath11k * push MU-MIMO params from hostapd to hardware * tx ack signal support for management packets
2023-03-13wifi: ath11k: add debug prints in regulatory WMI event processingAditya Kumar Singh
Add some more debug prints in processing regulatory WMI event in order to increase more debuggability. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230110121024.14051-4-quic_adisi@quicinc.com
2023-03-13wifi: ath11k: add support to parse new WMI event for 6 GHzAditya Kumar Singh
In order to support different power levels of 6 GHz AP and client, new WMI event for regulatory - WMI_REG_CHAN_LIST_CC_EXT_EVENTID is added in firmware. This event provides new parameters required for 6 GHz regulatory rules. Add support for parsing 2.4 GHz, 5 GHz and 6 GHz reg rules and other parameters from WMI_REG_CHAN_LIST_CC_EXT_EVENTID. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Signed-off-by: Lavanya Suresh <quic_lavaks@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230110121024.14051-3-quic_adisi@quicinc.com
2023-03-13wifi: ath11k: use proper regulatory reference for bandsAditya Kumar Singh
Currently, during regulatory event, 2 GHz/5 GHz is referred to as 2G/5G including variable names. However, there is no such entity as 2G or 5G. Re-name such occurences to its proper name. No functional changes. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230110121024.14051-2-quic_adisi@quicinc.com
2023-03-01wifi: ath11k: Add tx ack signal support for management packetsAbinaya Kalaiselvan
Add support to notify tx ack signal values for management packets to userspace through nl80211 interface. Advertise NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT flag to enable this feature and it will be used for data packets as well. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Abinaya Kalaiselvan <quic_akalaise@quicinc.com> Signed-off-by: Maharaja Kennadyrajan <quic_mkenna@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221219053844.4084486-1-quic_mkenna@quicinc.com
2023-02-27Merge tag 'net-6.3-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from wireless and netfilter. The notable fixes here are the EEE fix which restores boot for many embedded platforms (real and QEMU); WiFi warning suppression and the ICE Kconfig cleanup. Current release - regressions: - phy: multiple fixes for EEE rework - wifi: wext: warn about usage only once - wifi: ath11k: allow system suspend to survive ath11k Current release - new code bugs: - mlx5: Fix memory leak in IPsec RoCE creation - ibmvnic: assign XPS map to correct queue index Previous releases - regressions: - netfilter: ip6t_rpfilter: Fix regression with VRF interfaces - netfilter: ctnetlink: make event listener tracking global - nf_tables: allow to fetch set elements when table has an owner - mlx5: - fix skb leak while fifo resync and push - fix possible ptp queue fifo use-after-free Previous releases - always broken: - sched: fix action bind logic - ptp: vclock: use mutex to fix "sleep on atomic" bug if driver also uses a mutex - netfilter: conntrack: fix rmmod double-free race - netfilter: xt_length: use skb len to match in length_mt6, avoid issues with BIG TCP Misc: - ice: remove unnecessary CONFIG_ICE_GNSS - mlx5e: remove hairpin write debugfs files - sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy" * tag 'net-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits) tcp: tcp_check_req() can be called from process context net: phy: c45: fix network interface initialization failures on xtensa, arm:cubieboard xen-netback: remove unused variables pending_idx and index net/sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy net: dsa: ocelot_ext: remove unnecessary phylink.h include net: mscc: ocelot: fix duplicate driver name error net: dsa: felix: fix internal MDIO controller resource length net: dsa: seville: ignore mscc-miim read errors from Lynx PCS net/sched: act_sample: fix action bind logic net/sched: act_mpls: fix action bind logic net/sched: act_pedit: fix action bind logic wifi: wext: warn about usage only once wifi: mt76: usb: fix use-after-free in mt76u_free_rx_queue qede: avoid uninitialized entries in coal_entry array nfc: fix memory leak of se_io context in nfc_genl_se_io ice: remove unnecessary CONFIG_ICE_GNSS net/sched: cls_api: Move call to tcf_exts_miss_cookie_base_destroy() ibmvnic: Assign XPS map to correct queue index docs: net: fix inaccuracies in msg_zerocopy.rst tools: net: add __pycache__ to gitignore ...
2023-02-27wifi: ath11k: generate rx and tx mcs maps for supported HE mcsMuna Sinada
Generate rx and tx mcs maps in ath11k_mac_set_hemcsmap() and set them in supported mcs/nss for HE capabilities. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00356-QCAHKSWPL_SILICONZ-1 Signed-off-by: Muna Sinada <quic_msinada@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/1666128501-12364-5-git-send-email-quic_msinada@quicinc.com
2023-02-27wifi: ath11k: move HE MCS mapper to a separate functionMuna Sinada
Move HE MCS mapper to a separate function and call new function in ath11k_mac_copy_he_cap(). Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00356-QCAHKSWPL_SILICONZ-1 Signed-off-by: Muna Sinada <quic_msinada@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/1666128501-12364-4-git-send-email-quic_msinada@quicinc.com
2023-02-27wifi: ath11k: push MU-MIMO params from hostapd to hardwareMuna Sinada
In the previous behaviour only HE IE in management frames are changed regarding MU-MIMO configurations and not in hardware. Adding push of MU-MIMO configurations to the hardware as well. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00356-QCAHKSWPL_SILICONZ-1 Co-developed-by: Anilkumar Kolli <quic_akolli@quicinc.com> Signed-off-by: Anilkumar Kolli <quic_akolli@quicinc.com> Signed-off-by: Muna Sinada <quic_msinada@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/1666128501-12364-3-git-send-email-quic_msinada@quicinc.com
2023-02-27wifi: ath11k: modify accessor macros to match index sizeMuna Sinada
HE PHY is only 11 bytes, therefore it should be using byte indexes instead of dword. Change corresponding macros to reflect this. Signed-off-by: Muna Sinada <quic_msinada@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/1666128501-12364-2-git-send-email-quic_msinada@quicinc.com
2023-02-24Merge tag 'iommu-updates-v6.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: - Consolidate iommu_map/unmap functions. There have been blocking and atomic variants so far, but that was problematic as this approach does not scale with required new variants which just differ in the GFP flags used. So Jason consolidated this back into single functions that take a GFP parameter. - Retire the detach_dev() call-back in iommu_ops - Arm SMMU updates from Will: - Device-tree binding updates: - Cater for three power domains on SM6375 - Document existing compatible strings for Qualcomm SoCs - Tighten up clocks description for platform-specific compatible strings - Enable Qualcomm workarounds for some additional platforms that need them - Intel VT-d updates from Lu Baolu: - Add Intel IOMMU performance monitoring support - Set No Execute Enable bit in PASID table entry - Two performance optimizations - Fix PASID directory pointer coherency - Fix missed rollbacks in error path - Cleanups - Apple t8110 DART support - Exynos IOMMU: - Implement better fault handling - Error handling fixes - Renesas IPMMU: - Add device tree bindings for r8a779g0 - AMD IOMMU: - Various fixes for handling on SNP-enabled systems and handling of faults with unknown request-ids - Cleanups and other small fixes - Various other smaller fixes and cleanups * tag 'iommu-updates-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (71 commits) iommu/amd: Skip attach device domain is same as new domain iommu: Attach device group to old domain in error path iommu/vt-d: Allow to use flush-queue when first level is default iommu/vt-d: Fix PASID directory pointer coherency iommu/vt-d: Avoid superfluous IOTLB tracking in lazy mode iommu/vt-d: Fix error handling in sva enable/disable paths iommu/amd: Improve page fault error reporting iommu/amd: Do not identity map v2 capable device when snp is enabled iommu: Fix error unwind in iommu_group_alloc() iommu/of: mark an unused function as __maybe_unused iommu: dart: DART_T8110_ERROR range should be 0 to 5 iommu/vt-d: Enable IOMMU perfmon support iommu/vt-d: Add IOMMU perfmon overflow handler support iommu/vt-d: Support cpumask for IOMMU perfmon iommu/vt-d: Add IOMMU perfmon support iommu/vt-d: Support Enhanced Command Interface iommu/vt-d: Retrieve IOMMU perfmon capability information iommu/vt-d: Support size of the register set in DRHD iommu/vt-d: Set No Execute Enable bit in PASID table entry iommu/vt-d: Remove sva from intel_svm_dev ...
2023-02-22wifi: ath11k: allow system suspend to survive ath11kLen Brown
When ath11k runs into internal errors upon suspend, it returns an error code to pci_pm_suspend, which aborts the entire system suspend. The driver should not abort system suspend, but should keep its internal errors to itself, and allow the system to suspend. Otherwise, a user can suspend a laptop by closing the lid and sealing it into a case, assuming that is will suspend, rather than heating up and draining the battery when in transit. In practice, the ath11k device seems to have plenty of transient errors, and subsequent suspend cycles after this failure often succeed. https://bugzilla.kernel.org/show_bug.cgi?id=216968 Fixes: d1b0c33850d29 ("ath11k: implement suspend for QCA6390 PCI devices") Signed-off-by: Len Brown <len.brown@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230201183201.14431-1-len.brown@intel.com
2023-02-22wifi: ath11k: fix SAC bug on peer addition with sta band migrationChristian Marangi
Fix sleep in atomic context warning detected by Smatch static checker analyzer. Following the locking pattern for peer_rhash_add lock tbl_mtx_lock mutex always even if sta is not transitioning to another band. This is peer_add function and a more secure locking should not cause performance regression. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1 Fixes: d673cb6fe6c0 ("wifi: ath11k: fix peer addition/deletion error on sta band migration") Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230209222622.1751-1-ansuelsmth@gmail.com
2023-02-22wifi: ath11k: Use platform_get_irq() to get the interruptDouglas Anderson
As of commit a1a2b7125e10 ("of/platform: Drop static setup of IRQ resource from DT core"), we need to use platform_get_irq() instead of platform_get_resource() to get our IRQs because platform_get_resource() simply won't get them anymore. This was already fixed in several other Atheros WiFi drivers, apparently in response to Zeal Robot reports. An example of another fix is commit 9503a1fc123d ("ath9k: Use platform_get_irq() to get the interrupt"). ath11k seems to have been missed in this effort, though. Without this change, WiFi wasn't coming up on my Qualcomm sc7280-based hardware. Specifically, "platform_get_resource(pdev, IORESOURCE_IRQ, i)" was failing even for i=0. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Fixes: a1a2b7125e10 ("of/platform: Drop static setup of IRQ resource from DT core") Fixes: 00402f49d26f ("ath11k: Add support for WCN6750 device") Signed-off-by: Douglas Anderson <dianders@chromium.org> Tested-by: Jun Yu <junyuu@chromium.org> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230201084131.v2.1.I69cf3d56c97098287fe3a70084ee515098390b70@changeid
2023-02-20wifi: ath11k: fix return value check in ath11k_ahb_probe()Yang Yingliang
ioremap() returns NULL pointer not PTR_ERR() when it fails, so replace the IS_ERR() check with NULL pointer check. Fixes: b42b3678c91f ("wifi: ath11k: remap ce register space for IPQ5018") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230217030031.4021289-1-yangyingliang@huawei.com
2023-02-17wifi: ath11k: Set ext passive scan flag to adjust passive scan start timeTamizh Chelvam Raja
Set the WMI_SCAN_FLAG_EXT_PASSIVE_SCAN_START_TIME_ENHANCE flag while sending the scan command. If this flag is enabled when the incoming scan request comes with a strict start time and its duration overlaps with next TBTT, then target adjust the start time accordingly for passive scan. Target supporting this feature will advertise WMI_TLV_SERVICE_PASSIVE_SCAN_START_TIME_ENHANCE. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01467-QCAHKSWPL_SILICONZ-1 Signed-off-by: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221222131720.11368-1-quic_tamizhr@quicinc.com
2023-02-13Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for v6.3. Major changes: ath12k * new driver for Qualcomm Wi-Fi 7 devices ath11k * IPQ5018 support * Fine Timing Measurement (FTM) responder role support * channel 177 support ath10k * store WLAN firmware version in SMEM image table
2023-01-25iommu: Add a gfp parameter to iommu_map()Jason Gunthorpe
The internal mechanisms support this, but instead of exposting the gfp to the caller it wrappers it into iommu_map() and iommu_map_atomic() Fix this instead of adding more variants for GFP_KERNEL_ACCOUNT. Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/1-v3-76b587fe28df+6e3-iommu_map_gfp_jgg@nvidia.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-01-19wifi: mac80211: drop extra 'e' from ieeee80211... nameJohannes Berg
Somehow an extra 'e' slipped in there without anyone noticing, drop that from ieeee80211_obss_color_collision_notify(). Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-01-18wifi: ath11k: Fix memory leak in ath11k_peer_rx_frag_setupMiaoqian Lin
crypto_alloc_shash() allocates resources, which should be released by crypto_free_shash(). When ath11k_peer_find() fails, there has memory leak. Add missing crypto_free_shash() to fix this. Fixes: 243874c64c81 ("ath11k: handle RX fragments") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230102081142.3937570-1-linmq006@gmail.com
2023-01-18wifi: ath11k: fix ce memory mapping for ahb devicesRaj Kumar Bhagat
Currently ath11k_ahb module is not loaded successfully and the wifi interface is not created. Kernel trace is seen while loading the ath11k_ahb module. The issue is seen in all ath11k AHB devices except in IPQ5018. This happens because in ath11k_ahb_probe(), ab->mem_ce is initialized with the value of ab->mem. However, at this instant ab->mem is not yet set. Later, during write to a particular memory via ath11k_ahb_write32() this ab->mem_ce is used with particular offset. Since ab->mem_ce is not set properly this possibly leads to memory conflict to handle kernel paging request and the below trace is seen. [ 93.035047] Unable to handle kernel paging request at virtual address ffff800100a00000 [ 93.035083] Mem abort info: [ 93.041869] ESR = 0x0000000096000045 [ 93.044561] EC = 0x25: DABT (current EL), IL = 32 bits [ 93.048377] SET = 0, FnV = 0 [ 93.053840] EA = 0, S1PTW = 0 [ 93.056704] FSC = 0x05: level 1 translation fault [ 93.059745] Data abort info: [ 93.064603] ISV = 0, ISS = 0x00000045 [ 93.067729] CM = 0, WnR = 1 [ 93.071287] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000042219000 [ 93.074409] [ffff800100a00000] pgd=100000007ffff003, p4d=100000007ffff003, pud=0000000000000000 [ 93.081195] Internal error: Oops: 0000000096000045 [#1] PREEMPT SMP [ 93.089598] Modules linked in: ath11k_ahb ath11k_pci ath11k qmi_helpers [ 93.095851] CPU: 2 PID: 66 Comm: kworker/u8:3 Not tainted 6.1.0-rc8-wt-ath-658126-g58e4b9df840c-dirty #2 [ 93.102454] Hardware name: Qualcomm Technologies, Inc. IPQ8074/AP-HK14 (DT) [ 93.112171] Workqueue: ath11k_qmi_driver_event ath11k_qmi_driver_event_work [ath11k] [ 93.118856] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 93.126838] pc : ath11k_ahb_write32+0xc/0x18 [ath11k_ahb] [ 93.133520] lr : ath11k_hal_srng_setup+0x860/0x8f0 [ath11k] [ 93.139075] sp : ffff80000aaebb70 [ 93.144452] x29: ffff80000aaebb70 x28: 0000000000000020 x27: ffff80000aaebc50 [ 93.147934] x26: ffff000004923750 x25: ffff000004921200 x24: ffff000004928000 [ 93.155051] x23: 0000000000000020 x22: ffff000004930000 x21: ffff000004923200 [ 93.162170] x20: ffff000004920000 x19: 00000000eea00000 x18: ffff0000049200f0 [ 93.169288] x17: 0000000000000000 x16: 0000000000000000 x15: 000000000000025e [ 93.176405] x14: ffff000003c414f0 x13: 0000000000000000 x12: 0000000000000008 [ 93.183524] x11: ffff000003c41488 x10: 0000000000000040 x9 : 0000000000000000 [ 93.190641] x8 : ffff80000a9dd100 x7 : 0000000000000000 x6 : 000000000000003f [ 93.197759] x5 : ffff800100a00400 x4 : ffff8000031f4018 x3 : 0000000000000004 [ 93.204877] x2 : 0000000047b62000 x1 : ffff800100a00000 x0 : ffff800012000000 [ 93.211996] Call trace: [ 93.219104] ath11k_ahb_write32+0xc/0x18 [ath11k_ahb] [ 93.221366] ath11k_ce_init_ring+0x184/0x278 [ath11k] [ 93.226576] ath11k_ce_init_pipes+0x4c/0x1a0 [ath11k] [ 93.231610] ath11k_core_qmi_firmware_ready+0x3c/0x568 [ath11k] [ 93.236646] ath11k_qmi_driver_event_work+0x168/0x4f8 [ath11k] [ 93.242376] process_one_work+0x144/0x350 [ 93.248275] worker_thread+0x120/0x430 [ 93.252352] kthread+0xf4/0x110 [ 93.255997] ret_from_fork+0x10/0x20 [ 93.259043] Code: d503201f f94e1c00 8b214001 d50332bf (b9000022) [ 93.262863] ---[ end trace 0000000000000000 ]--- However, for the device IPQ5018 ath11k_hw_params .ce_remap is defined. This parameter is used to recalculate ab->mem_ce and hence, this issue is not seen in IPQ5018. Hence, fix this by initializing ab->mem_ce after ab->mem is set. ab->mem is set inside the ath11k_ahb_setup_resources() therefore initialize ab->mem_ce after ath11k_ahb_setup_resources(). Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Fixes: b42b3678c91f ("wifi: ath11k: remap ce register space for IPQ5018") Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230113063209.7256-1-quic_rajkbhag@quicinc.com
2023-01-17wifi: ath11k: add channel 177 into 5 GHz channel listWen Gong
Add support for the 5 GHz channel 177 with center frequency 5885 MHz and operating class 125 per IEEE Std 802.11ax-2021, Table E-4. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221220101912.30816-1-quic_wgong@quicinc.com
2023-01-17wifi: ath11k: Add support to configure FTM responder roleSowmiya Sree Elavalagan
Fine Timing Measurement(FTM) support is used to measure round trip time between two nodes. Enable FTM responder feature using hw_params on supported device. Since FTM functionality is offloaded to firmware, adding the interface allows user space to enable or disable FTM responder. Also add support for advertising the same in extended capabilities. QCA6390, WCN6855 and WCN6750 do not support this feature. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sowmiya Sree Elavalagan <quic_ssreeela@quicinc.com> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221220044435.10506-1-quic_rajkbhag@quicinc.com
2023-01-10wifi: ath11k: debugfs: fix to work with multiple PCI devicesKalle Valo
ath11k fails to load if there are multiple ath11k PCI devices with same name: ath11k_pci 0000:01:00.0: Hardware name qcn9074 hw1.0 debugfs: Directory 'ath11k' with parent '/' already present! ath11k_pci 0000:01:00.0: failed to create ath11k debugfs ath11k_pci 0000:01:00.0: failed to create soc core: -17 ath11k_pci 0000:01:00.0: failed to init core: -17 ath11k_pci: probe of 0000:01:00.0 failed with error -17 Fix this by creating a directory for each ath11k device using schema <bus>-<devname>, for example "pci-0000:06:00.0". This directory created under the top-level ath11k directory, for example /sys/kernel/debug/ath11k. The reference to the toplevel ath11k directory is not stored anymore within ath11k, instead it's retrieved using debugfs_lookup(). If the directory does not exist it will be created. After the last directory from the ath11k directory is removed, for example when doing rmmod ath11k, the empty ath11k directory is left in place, it's a minor cosmetic issue anyway. Here's an example hierarchy with one WCN6855: ath11k `-- pci-0000:06:00.0 |-- mac0 | |-- dfs_block_radar_events | |-- dfs_simulate_radar | |-- ext_rx_stats | |-- ext_tx_stats | |-- fw_dbglog_config | |-- fw_stats | | |-- beacon_stats | | |-- pdev_stats | | `-- vdev_stats | |-- htt_stats | |-- htt_stats_reset | |-- htt_stats_type | `-- pktlog_filter |-- simulate_fw_crash `-- soc_dp_stats I didn't have a test setup where I could connect multiple ath11k devices to the same the host, so I have only tested this with one device. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.9 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1 Tested-by: Robert Marko <robert.marko@sartura.hr> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221220121231.20120-1-kvalo@kernel.org
2022-12-08wifi: ath11k: fix monitor mode bringup crashNagarajan Maran
When the interface is brought up in monitor mode, it leads to NULL pointer dereference crash. This crash happens when the packet type is extracted for a SKB. This extraction which is present in the received msdu delivery path,is not needed for the monitor ring packets since they are all RAW packets. Hence appending the flags with "RX_FLAG_ONLY_MONITOR" to skip that extraction. Observed calltrace: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000064 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000000048517000 [0000000000000064] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP Modules linked in: ath11k_pci ath11k qmi_helpers CPU: 2 PID: 1781 Comm: napi/-271 Not tainted 6.1.0-rc5-wt-ath-656295-gef907406320c-dirty #6 Hardware name: Qualcomm Technologies, Inc. IPQ8074/AP-HK10-C2 (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : ath11k_hw_qcn9074_rx_desc_get_decap_type+0x34/0x60 [ath11k] lr : ath11k_hw_qcn9074_rx_desc_get_decap_type+0x5c/0x60 [ath11k] sp : ffff80000ef5bb10 x29: ffff80000ef5bb10 x28: 0000000000000000 x27: ffff000007baafa0 x26: ffff000014a91ed0 x25: 0000000000000000 x24: 0000000000000000 x23: ffff800002b77378 x22: ffff000014a91ec0 x21: ffff000006c8d600 x20: 0000000000000000 x19: ffff800002b77740 x18: 0000000000000006 x17: 736564203634343a x16: 656e694c20657079 x15: 0000000000000143 x14: 00000000ffffffea x13: ffff80000ef5b8b8 x12: ffff80000ef5b8c8 x11: ffff80000a591d30 x10: ffff80000a579d40 x9 : c0000000ffffefff x8 : 0000000000000003 x7 : 0000000000017fe8 x6 : ffff80000a579ce8 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 3a35ec12ed7f8900 x1 : 0000000000000000 x0 : 0000000000000052 Call trace: ath11k_hw_qcn9074_rx_desc_get_decap_type+0x34/0x60 [ath11k] ath11k_dp_rx_deliver_msdu.isra.42+0xa4/0x3d0 [ath11k] ath11k_dp_rx_mon_deliver.isra.43+0x2f8/0x458 [ath11k] ath11k_dp_rx_process_mon_rings+0x310/0x4c0 [ath11k] ath11k_dp_service_srng+0x234/0x338 [ath11k] ath11k_pcic_ext_grp_napi_poll+0x30/0xb8 [ath11k] __napi_poll+0x5c/0x190 napi_threaded_poll+0xf0/0x118 kthread+0xf4/0x110 ret_from_fork+0x10/0x20 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Reported-by: Florian Schmidt <florian@fls.name> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216573 Signed-off-by: Nagarajan Maran <quic_nmaran@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221129142532.23421-1-quic_nmaran@quicinc.com
2022-12-08wifi: ath11k: Fix scan request param frame size warningKarthikeyan Kathirvel
Following warning was observed drivers/net/wireless/ath/ath11k/mac.c:2351:1: warning: the frame size of 1184 bytes is larger than 1024 bytes [-Wframe-larger-than=] A local variable is declared with a size larger than 1024 bytes this causing a compilation warning. Change the local variable to heap memory to fix the warning. Tested-on: IPQ8074 AHB WLAN.HK.2.7.0.1-01701-QCAHKSWPL_SILICONZ-1 v2 Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221205192125.13533-1-quic_kathirve@quicinc.com
2022-12-07wifi: ath11k: add ipq5018 device supportSriram R
ipq5018 is a ahb 2ghz device, enable the compatible support for ipq5018 in ahb. Tested-on: IPQ5018 hw1.0 AHB WLAN.HK.2.6.0.1-00861-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com> Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221122132152.17771-9-quic_kathirve@quicinc.com
2022-12-07wifi: ath11k: add new hw ops for IPQ5018 to get rx dest ring hashmapSriram R
The Destination ring control register is different for IPQ5018 when compared to IPQ8074/IPQ6018/QCN9074. Hence create a new hw ops to fetch the hash ring map for different device variants. ipq5018 hw ops is similar to qcn9074 except for this change, so reuse all the qcn9074 ops for ipq5018. Tested-on: IPQ5018 hw1.0 AHB WLAN.HK.2.6.0.1-00861-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com> Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221122132152.17771-8-quic_kathirve@quicinc.com
2022-12-07wifi: ath11k: initialize hw_ops for IPQ5018Sriram R
The ipq5018_ops is initialized for IPQ5018. This is different from other platforms. Tested-on: IPQ5018 hw1.0 AHB WLAN.HK.2.6.0.1-00861-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com> Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221122132152.17771-7-quic_kathirve@quicinc.com
2022-12-07wifi: ath11k: update hal srng regs for IPQ5018Sriram R
IPQ5018 hal srng register address & offsets are not similar to IPQ8074/IPQ6018/QCN9074, hence define a new set of srng register group data for IPQ5018. Tested-on: IPQ5018 hw1.0 AHB WLAN.HK.2.6.0.1-00861-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com> Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221122132152.17771-6-quic_kathirve@quicinc.com
2022-12-07wifi: ath11k: remap ce register space for IPQ5018Sriram R
In IPQ5018 ce register space is moved out of wcss unlike ipq8074 or ipq6018 and the space is not contiguous, hence remap the CE registers to a new space to access them. Register read/write is modified to check if the register to be written falls in the CE register space and corresponding register is written. Also adjust the interrupt register address to ce irq enable/disable. Tested-on: IPQ5018 hw1.0 AHB WLAN.HK.2.6.0.1-00861-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com> Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221122132152.17771-5-quic_kathirve@quicinc.com
2022-12-07wifi: ath11k: update ce configurations for IPQ5018Sriram R
IPQ5018 is a single pdev device. Update host and target CE configurations accordingly. Tested-on: IPQ5018 hw1.0 AHB WLAN.HK.2.6.0.1-00861-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com> Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221122132152.17771-4-quic_kathirve@quicinc.com
2022-12-07wifi: ath11k: update hw params for IPQ5018Sriram R
Add new compatible string for IPQ5018 and add required hw params for IPQ5018. The hw descriptors size and datapath ops are similar to QCN9074, hence reuse the same. Tested-on: IPQ5018 hw1.0 AHB WLAN.HK.2.6.0.1-00861-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com> Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221122132152.17771-3-quic_kathirve@quicinc.com
generated by cgit (git 2.34.1) at 2025-07-18 17:23:50 +0000