summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2014-05-29i40e: Report cmd->data in ETHTOOL_GRXCLSRLCNT instead of ETHTOOL_GRXCLSRULEAnjali Singhai Jain
Based on review feedback from upstream cmd->data is not defined in ETHTOOL_GRXCLSRULE but needs to be reported in ETHTOOL_GRXCLSRLCNT. Also use a helper function to calculate the total filter count. Change-ID: Iaacbf729527b73290c4fdad837b379b44fd7dd20 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-29i40e/i40evf: Remove reserved PCTYPE definesKevin Scott
Patch to remove PCTYPE definitions which are now reserved. Change-ID: I66c1c16a45a16f4894b2983101ab2a48ce03f1f4 Signed-off-by: Kevin Scott <kevin.c.scott@intel.com> Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-29i40e: Tx/Rx rings declarationAkeem G Abodunrin
This patch changes the declaration of Tx/Rx rings inside several loops. It eliminates declaring the same rings every time for the duration of the loop, instead declaring them once before the loop. Change-ID: I59dea54276f18c47dca522f520c18f65fe42a15d Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-29i40evf: tweak Tx rate params and de-magic-ifyMitch Williams
In order for the VF to achieve its programmed Tx rate, we need to set the max credits value to 4. While we're at it, get rid of some magic numbers. Change-ID: I4f17b4d3a90f1e069bdd134a543f0aa22feac3a9 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-29i40evf: don't round Tx rate down to 0Mitch Williams
Because the hardware configures VF Tx rates in increments of 50 Mbps, values smaller than that would be rounded down to 0, which was interpreted as no limit at all. Rather than do this, we round up to 50 Mbps and notify the user. Change-ID: I5275848233fe7514cf93e11323661c68f4c38737 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-29i40e: enable descriptor prefetch for VFsMitch Williams
As recommended by the hardware guys, enable descriptor prefetch for rings belonging to VFs. This matches a change already made for ring belonging to the PF. Change-ID: Idcc4dc7064bc9144ea81f5701ad07b7ecd11ba49 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-29i40e/i40evf: Update check for AQ alivenessKevin Scott
Update the i40e_check_asq_alive check to ensure that the len register offset is non-zero, indicating that SW has initialized the AQ. Change-ID: I9c2e804788b4775bef9c7e80954ab004e6bdb306 Signed-off-by: Kevin Scott <kevin.c.scott@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-27Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2014-05-27Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2014-05-27can: only rename enabled led triggers when changing the netdev nameOliver Hartkopp
Commit a1ef7bd9fce8 ("can: rename LED trigger name on netdev renames") renames the led trigger names according to the changed netdevice name. As not every CAN driver supports and initializes the led triggers, checking for the CAN private datastructure with safe_candev_priv() in the notifier chain is not enough. This patch adds a check when CONFIG_CAN_LEDS is enabled and the driver does not support led triggers. For stable 3.9+ Cc: Fabio Baltieri <fabio.baltieri@gmail.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2014-05-27ath10k: abort incomplete scatter-gather pci tx properlyMichal Kazior
This prevents leaving incomplete scatter-gather transfer on CE rings which can lead firmware to crash. Reported-By: Avery Pennarun <apenwarr@gmail.com> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-05-27ath10k: protect src_ring state with ce_lock in tx_sg()Michal Kazior
It was possible to read invalid state of CE ring buffer indexes. This could lead to scatter-gather transfer failure in mid-way and crash firmware later by leaving garbage data on the ring. Reported-By: Avery Pennarun <apenwarr@gmail.com> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-05-27ath10k: ensure rx-frag ignores rssiBen Greear
It seems ath10k firmware gives us no way to know the rssi for rx-fragments. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-05-27ath10k: dont configure bssid for ap modeMichal Kazior
FW creates self-peer for AP internally. This prevents ath10k from trying to create explicit self-peer during hw recovery and thus prevents a timeout and a warning during teardown: ath10k: removing stale peer $AP_BSSID from vdev_id 0 Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-05-27ath10k: protect wep tx key setupMichal Kazior
All configuration sequences should be protected with conf_mutex to avoid concurrent/conflicting requests. This should make sure that wep tx key setup is not performed while hw is restarted (at least). Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-05-27ath10k: drain tx before restarting hwMichal Kazior
This makes sure no further tx requests are submitted to HTT before driver teardown. This should prevent invalid pointer/NULL dereference on htt tx pool in ath10k_htt_tx() in some cases of heavy traffic. kvalo: remove the WARN_ON() if conf_mutex is held Reported-By: Ben Greear <greearb@candelatech.com> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-05-27ath10k: perform hw restart lazilyMichal Kazior
This reduces risk of races and prepares for more hw restart fixes. It also makes sense to perform teardown after mac80211 starts its restart routine as it guarantees it has stopped itself by then (including tx queues). Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-05-27ath10k: clean up start() callbackMichal Kazior
This fixes failpath when override AC pdev param setup fails and makes other pdev params setting fail as well. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-05-27i40evf: Use is_multicast_ether_addr helperTobias Klauser
Use the is_multicast_ether_addr helper function from linux/etherdevice.h instead of open coding the multicast address check. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-27e1000: Use is_broadcast_ether_addr/is_multicast_ether_addr helpersTobias Klauser
Use the is_broadcast_ether_addr/is_multicast_ether_addr helper functions from linux/etherdevice.h instead of open coding them. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-27igb: remove redundant PHY power down register writeTodd Fujinaka
One of the registers used to power down the PHY was found to be wrong (should be bit 2 not bit 1) on further inspection it was also found to be redundant. Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-27e1000e: Out of line __ew32_prepare/__ew32Andi Kleen
Out of lining these two common inlines saves about 30k text size, due to their errata workarounds. 14131431 2008136 1507328 17646895 10d452f vmlinux-before-e1000e 14101415 2004040 1507328 17612783 10cbfef vmlinux-e1000e Signed-off-by: Andi Kleen <ak@linux.intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-27e1000e: Fix expand setting EEE link info to all affected partsDavid Ertman
Previously, the update_phy_task was only calling e1000_set_eee_pchlan() for phy.type 82579. This patch is to cause this function to be called for 82579 and newer phy.types. This causes the dev_spec->eee_lp_ability to have the correct value when going into SX states. Signed-off-by: Dave Ertman <davidx.m.ertman@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-27e1000e: Cleanup parenthesis around return valueDavid Ertman
Signed-off-by: Dave Ertman <davidx.m.ertman@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-27e1000e: 82574/82583 TimeSync errata for SYSTIM readTodd Fujinaka
Due to a synchronization error, the value read from SYSTIML/SYSTIMH might be incorrect. Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-26e1000e: Failure to write SHRA turns on PROMISC modeDavid Ertman
Previously, the check to turn on promiscuous mode only took into account the total number of SHared Receive Address (SHRA) registers and if the request was for a register within that range. It is possible that the Management Engine might have locked a number of SHRA and not allowed a new address to be written to the requested register. Add a function to determine the number of unlocked SHRA registers. Then determine if the number of registers available is sufficient for our needs, if not then return -ENOMEM so that UNICAST PROMISC mode is activated. Since the method by which ME claims SHRA registers is non-deterministic, also add a return value to the function attempting to write an address to a SHRA, and return a -E1000_ERR_CONFIG if the write fails. The error will be passed up the function chain and allow the driver to also set UNICAST PROMISC when this happens. Cc: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: Dave Ertman <davidx.m.ertman@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-26ixgbe: avoid duplicate code in suspend and stop pathsJacob Keller
Resume path calls .open but suspend path cannot call .stop because fdirs should not be freed and control over hardware should not be released until WoL is configured. To avoid having to duplicate all changes made in .stop on suspend path split out part of .stop that is relevant during suspend and call it from .stop and during suspend. This fix also ensures that ixgbe_ptp_suspend is called during the suspend path, and helps avoid similar errors. We can't call ixgbe_ptp_stop, since it will free the PTP clock device, which we shouldn't be doing during a suspend path. Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-26ixgbe: separate the PTP suspend and stop actionsJacob Keller
Since we are adding proper support for suspend of PTP, extract out of ixgbe_ptp_stop those things relevant to suspend. Then, have ixgbe_ptp_stop call ixgbe_ptp_suspend. The next patch in the series will have ixgbe_ptp_suspend called from the ixgbe_suspend path. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-26ixgbe: extract PTP clock device from ptp_initJacob Keller
In order to properly handle a suspend/resume cycle, we cannot destroy the PTP clock device. As part of this, we should only re-create the device on first initialization. After a resume, when ixgbe_ptp_init is called, we won't create a new clock, and we will use the old clock device. To that end, this patch extracts the clock creation out of ptp_init, and only calls it if we don't already have a ptp_clock pointer. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-26ixgbe: allow ixgbe_ptp_reset to maintain current hwtstamp configJacob Keller
Rather than clearing the hwtstamp configuration, we should use the known configuration requested by the user and call the function which has now been separated from the ioctl. This means that after a reset, the timestamp mode will be maintained rather than lost. We still can't maintain the clock value, however. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-26ixgbe: extract the hardware setup from the ixgbe_ptp_set_ts_configJacob Keller
Currently all of the hardware setup logic for the PTP hardware bits is buried inside of the ioctl which sets the timestamp configuration. This makes it hard to use this logic in other places (primarily reset), and this means we can't restore current timestamp mode upon a MAC reset. Extracting this logic into a separate function will enable future work for the ixgbe_ptp_reset function. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-26ixgbe: rename ixgbe_ptp_enable to ixgbe_ptp_feature_enableJacob Keller
Since the name ixgbe_ptp_enable could be misconstrued as a function which enables the whole PTP core, rename this function so that it is clear the function is for enabling of the extra features such as PPS signal. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-26ixgbe: fix linking at 100Mbps on copper devices with MNG FW enabledEmil Tantilov
Driver was calling setup_link to make sure that fiber interfaces with MNG FW enabled will get link on probe because the laser was most likely turned off. This prevented non-fiber devices with MNG FW from linking at 100Mbps. This patch adds a check to only call setup_link for fiber devices. Reported-and-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Tony Luck <tony.luck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-26ath10k: make core registering asyncMichal Kazior
If ath10k was built into the kernel it could stall booting for 120 seconds by default (60 seconds for each firmware API variant) waiting for firmware files before userspace was ready or filesystems mounted. Fix this by making the core registering asynchronous. This also shoves off about 1 second from boot time on most systems since the driver is now mostly initialized in a worker and modprobe takes very little time to complete. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-05-26ath10k: remove unnecessary tasklet_kill()Michal Kazior
The tasklet is already guaranteed to be killed on the teardown path. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-05-26ath10k: relocate core create/destroy functionsMichal Kazior
This will avoid unnecessary forward declaration of any kind in the future. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-05-26ath10k: fix protected flag strippingMichal Kazior
This prevents protected flag being stripped from undecrypted raw sniffed frames when monitor interface is active. Reported-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Tested-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-05-26can: xilinx CAN controller supportKedareswara rao Appana
This patch adds xilinx CAN controller support. This driver supports both ZYNQ CANPS and Soft IP AXI CAN controller. Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2014-05-24tg3: Override clock, link aware and link idle mode during NVRAM dumpPrashant Sreedharan
When cable is not present the clock speed of some of the devices is reduced based upon power saving mode setting in NVRAM. Due to this NVRAM reads take long time to complete as a result CPU soft lockup message is seen. Fix is to override clock, disable link aware and link idle modes before NVRAM reads and restore them back after the reads are complete. During this period also check if the thread needs to be rescheduled and if there are any signals to handle. Also decrease the NVRAM command execution timeout value to 1ms. Signed-off-by: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-24net: driver: stmicro: Remove some useless the lock protectionYang Wei
kernel always invokes a pair of rtnl_lock adn rtnl_unlock to protect dev_ethtool(), so its not neccessary to invoke spin_lock/unlock in ethtool_ops. Signed-off-by: Yang Wei <Wei.Yang@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-24team: lb: use sizeof(*fprog) in __fprog_createDaniel Borkmann
sock_fprog and sock_fprog_kern are of equal size, however it's cleaner to just use sizeof(*fprog) instead to always have correct type. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-24Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== pull request: wireless 2014-05-23 I have two more fixes intended for the 3.15 stream... For the iwlwifi one, Emmanuel says: "A race has been discovered in the beacon filtering code. Since the fix is too big for 3.15, I disable here the feature." For the bluetooth one, Gustavo says: "This pull request contains a very important fix for 3.15. Here we fix the permissions of a debugfs file that would otherwise allow unauthorized users to write content to it." Please let me know if there are problems! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-24net: ks8851: Add of match tableStephen Boyd
Users are currently just providing "ks8851" as the compatible for this driver in device tree. Add a compatible string that provides the vendor name along with the device name to be more explicit. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-24net: ks8851: Add optional vdd_io regulator and reset gpioStephen Boyd
Allow the ks8851 driver to enable an optional 1.8V vdd_io regulator and assert the reset pin to the phy if a reset gpio is present in device tree. Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-24net: ks8851: Use devm_regulator_get_optional()Stephen Boyd
This simplifies error paths and removes the need to regulator_put(). Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-24qlcnic: info leak in qlcnic_dcb_peer_app_info()Dan Carpenter
This function is called from dcbnl_build_peer_app(). The "info" struct isn't initialized at all so we disclose 2 bytes of uninitialized stack data. We should clear it before passing it to the user. Fixes: 48365e485275 ('qlcnic: dcb: Add support for CEE Netlink interface.') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/bonding/bond_alb.c drivers/net/ethernet/altera/altera_msgdma.c drivers/net/ethernet/altera/altera_sgdma.c net/ipv6/xfrm6_output.c Several cases of overlapping changes. The xfrm6_output.c has a bug fix which overlaps the renaming of skb->local_df to skb->ignore_df. In the Altera TSE driver cases, the register access cleanups in net-next overlapped with bug fixes done in net. Similarly a bug fix to send ALB packets in the bonding driver using the right source address overlaps with cleanups in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-23net: filter: let unattached filters use sock_fprog_kernDaniel Borkmann
The sk_unattached_filter_create() API is used by BPF filters that are not directly attached or related to sockets, and are used in team, ptp, xt_bpf, cls_bpf, etc. As such all users do their own internal managment of obtaining filter blocks and thus already have them in kernel memory and set up before calling into sk_unattached_filter_create(). As a result, due to __user annotation in sock_fprog, sparse triggers false positives (incorrect type in assignment [different address space]) when filters are set up before passing them to sk_unattached_filter_create(). Therefore, let sk_unattached_filter_create() API use sock_fprog_kern to overcome this issue. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-23Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates This series contains updates to igb, igbvf, ixgbe, i40e and i40evf. Jacob provides eight patches to cleanup the ixgbe driver to resolve various checkpatch.pl warnings/errors as well as minor coding style issues. Stephen Hemminger and I provide simple cleanups of void functions which had useless return statements at the end of the function which are not needed. v2: Dropped Emil's patch "ixgbe: fix the detection of SFP+ capable interfaces" while I wait for his updated patch to be validated. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-23net: mvneta: Remove unneeded 'weigth' fieldEzequiel Garcia
The 'weight' field is only used to pass the weigth to napi initialization function. This commit removes the field, and instead uses a fixed value to initialize the napi context. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-07-16 16:31:36 +0000