summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2025-06-17wifi: ath12k: parse and save sbs_lower_band_end_freq from ↵Baochen Qiang
WMI_SERVICE_READY_EXT2_EVENTID event Firmware sends the boundary between lower and higher bands in ath12k_wmi_dbs_or_sbs_cap_params structure embedded in WMI_SERVICE_READY_EXT2_EVENTID event. The boundary is needed when updating frequency range in the following patch. So parse and save it for later use. Note ath12k_wmi_dbs_or_sbs_cap_params is placed after some other structures, so placeholders for them are added as well. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250522-ath12k-sbs-dbs-v1-2-54a29e7a3a88@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-06-17wifi: ath12k: parse and save hardware mode info from ↵Baochen Qiang
WMI_SERVICE_READY_EXT_EVENTID event for later use WLAN hardware might support various hardware modes such as DBS (dual band simultaneously), SBS (single band simultaneously) and DBS_OR_SBS etc, see enum wmi_host_hw_mode_config_type. Firmware advertises actual supported modes in WMI_SERVICE_READY_EXT_EVENTID event. For each mode, firmware advertises frequency range each hardware MAC can operate on. In MLO case such information is necessary during vdev activation and link selection (which is done in following patches), so add a new structure ath12k_svc_ext_info to ath12k_wmi_base, then parse and save those information to it for later use. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250522-ath12k-sbs-dbs-v1-1-54a29e7a3a88@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-06-17wifi: ath12k: Avoid CPU busy-wait by handling VDEV_STAT and BCN_STATBjorn Andersson
When the ath12k driver is built without CONFIG_ATH12K_DEBUG, the recently refactored stats code can cause any user space application (such at NetworkManager) to consume 100% CPU for 3 seconds, every time stats are read. Commit 'b8a0d83fe4c7 ("wifi: ath12k: move firmware stats out of debugfs")' moved ath12k_debugfs_fw_stats_request() out of debugfs, by merging the additional logic into ath12k_mac_get_fw_stats(). Among the added responsibility of ath12k_mac_get_fw_stats() was the busy-wait for `fw_stats_done`. Signalling of `fw_stats_done` happens when one of the WMI_REQUEST_PDEV_STAT, WMI_REQUEST_VDEV_STAT, and WMI_REQUEST_BCN_STAT messages are received, but the handling of the latter two commands remained in the debugfs code. As `fw_stats_done` isn't signalled, the calling processes will spin until the timeout (3 seconds) is reached. Moving the handling of these two additional responses out of debugfs resolves the issue. Fixes: b8a0d83fe4c7 ("wifi: ath12k: move firmware stats out of debugfs") Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com> Tested-by: Abel Vesa <abel.vesa@linaro.org> Link: https://patch.msgid.link/20250609-ath12k-fw-stats-done-v1-1-2b3624656697@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-06-17bnxt_en: Update MRU and RSS table of RSS contexts on queue resetPavan Chebbi
The commit under the Fixes tag below which updates the VNICs' RSS and MRU during .ndo_queue_start(), needs to be extended to cover any non-default RSS contexts which have their own VNICs. Without this step, packets that are destined to a non-default RSS context may be dropped after .ndo_queue_start(). We further optimize this scheme by updating the VNIC only if the RX ring being restarted is in the RSS table of the VNIC. Updating the VNIC (in particular setting the MRU to 0) will momentarily stop all traffic to all rings in the RSS table. Any VNIC that has the RX ring excluded from the RSS table can skip this step and avoid the traffic disruption. Note that this scheme is just an improvement. A VNIC with multiple rings in the RSS table will still see traffic disruptions to all rings in the RSS table when one of the rings is being restarted. We are working on a FW scheme that will improve upon this further. Fixes: 5ac066b7b062 ("bnxt_en: Fix queue start to update vnic RSS table") Reported-by: David Wei <dw@davidwei.uk> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250613231841.377988-4-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-17bnxt_en: Add a helper function to configure MRU and RSSPavan Chebbi
Add a new helper function that will configure MRU and RSS table of a VNIC. This will be useful when we configure both on a VNIC when resetting an RX ring. This function will be used again in the next bug fix patch where we have to reconfigure VNICs for RSS contexts. Suggested-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: David Wei <dw@davidwei.uk> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250613231841.377988-3-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-17bnxt_en: Fix double invocation of bnxt_ulp_stop()/bnxt_ulp_start()Kalesh AP
Before the commit under the Fixes tag below, bnxt_ulp_stop() and bnxt_ulp_start() were always invoked in pairs. After that commit, the new bnxt_ulp_restart() can be invoked after bnxt_ulp_stop() has been called. This may result in the RoCE driver's aux driver .suspend() method being invoked twice. The 2nd bnxt_re_suspend() call will crash when it dereferences a NULL pointer: (NULL ib_device): Handle device suspend call BUG: kernel NULL pointer dereference, address: 0000000000000b78 PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP PTI CPU: 20 UID: 0 PID: 181 Comm: kworker/u96:5 Tainted: G S 6.15.0-rc1 #4 PREEMPT(voluntary) Tainted: [S]=CPU_OUT_OF_SPEC Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017 Workqueue: bnxt_pf_wq bnxt_sp_task [bnxt_en] RIP: 0010:bnxt_re_suspend+0x45/0x1f0 [bnxt_re] Code: 8b 05 a7 3c 5b f5 48 89 44 24 18 31 c0 49 8b 5c 24 08 4d 8b 2c 24 e8 ea 06 0a f4 48 c7 c6 04 60 52 c0 48 89 df e8 1b ce f9 ff <48> 8b 83 78 0b 00 00 48 8b 80 38 03 00 00 a8 40 0f 85 b5 00 00 00 RSP: 0018:ffffa2e84084fd88 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ffffffffb4b6b934 RDI: 00000000ffffffff RBP: ffffa1760954c9c0 R08: 0000000000000000 R09: c0000000ffffdfff R10: 0000000000000001 R11: ffffa2e84084fb50 R12: ffffa176031ef070 R13: ffffa17609775000 R14: ffffa17603adc180 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffa17daa397000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000b78 CR3: 00000004aaa30003 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> bnxt_ulp_stop+0x69/0x90 [bnxt_en] bnxt_sp_task+0x678/0x920 [bnxt_en] ? __schedule+0x514/0xf50 process_scheduled_works+0x9d/0x400 worker_thread+0x11c/0x260 ? __pfx_worker_thread+0x10/0x10 kthread+0xfe/0x1e0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2b/0x40 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 Check the BNXT_EN_FLAG_ULP_STOPPED flag and do not proceed if the flag is already set. This will preserve the original symmetrical bnxt_ulp_stop() and bnxt_ulp_start(). Also, inside bnxt_ulp_start(), clear the BNXT_EN_FLAG_ULP_STOPPED flag after taking the mutex to avoid any race condition. And for symmetry, only proceed in bnxt_ulp_start() if the BNXT_EN_FLAG_ULP_STOPPED is set. Fixes: 3c163f35bd50 ("bnxt_en: Optimize recovery path ULP locking in the driver") Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Co-developed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250613231841.377988-2-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-17Merge tag 'linux-can-fixes-for-6.16-20250617' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2025-06-17 The patch is by Brett Werling, and fixes the power regulator retrieval during probe of the tcan4x5x glue code for the m_can driver. * tag 'linux-can-fixes-for-6.16-20250617' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: tcan4x5x: fix power regulator retrieval during probe openvswitch: Allocate struct ovs_pcpu_storage dynamically ==================== Link: https://patch.msgid.link/20250617155123.2141584-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-17net: ti: icssg-prueth: Fix packet handling for XDP_TXMeghana Malladi
While transmitting XDP frames for XDP_TX, page_pool is used to get the DMA buffers (already mapped to the pages) and need to be freed/reycled once the transmission is complete. This need not be explicitly done by the driver as this is handled more gracefully by the xdp driver while returning the xdp frame. __xdp_return() frees the XDP memory based on its memory type, under which page_pool memory is also handled. This change fixes the transmit queue timeout while running XDP_TX. logs: [ 309.069682] icssg-prueth icssg1-eth eth2: NETDEV WATCHDOG: CPU: 0: transmit queue 0 timed out 45860 ms [ 313.933780] icssg-prueth icssg1-eth eth2: NETDEV WATCHDOG: CPU: 0: transmit queue 0 timed out 50724 ms [ 319.053656] icssg-prueth icssg1-eth eth2: NETDEV WATCHDOG: CPU: 0: transmit queue 0 timed out 55844 ms ... Fixes: 62aa3246f462 ("net: ti: icssg-prueth: Add XDP support") Signed-off-by: Meghana Malladi <m-malladi@ti.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250616063319.3347541-1-m-malladi@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-17e1000e: set fixed clock frequency indication for Nahum 11 and Nahum 13Vitaly Lifshits
On some systems with Nahum 11 and Nahum 13 the value of the XTAL clock in the software STRAP is incorrect. This causes the PTP timer to run at the wrong rate and can lead to synchronization issues. The STRAP value is configured by the system firmware, and a firmware update is not always possible. Since the XTAL clock on these systems always runs at 38.4MHz, the driver may ignore the STRAP and just set the correct value. Fixes: cc23f4f0b6b9 ("e1000e: Add support for Meteor Lake") Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Reviewed-by: Gil Fine <gil.fine@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-06-17ice: fix eswitch code memory leak in reset scenarioGrzegorz Nitka
Add simple eswitch mode checker in attaching VF procedure and allocate required port representor memory structures only in switchdev mode. The reset flows triggers VF (if present) detach/attach procedure. It might involve VF port representor(s) re-creation if the device is configured is switchdev mode (not legacy one). The memory was blindly allocated in current implementation, regardless of the mode and not freed if in legacy mode. Kmemeleak trace: unreferenced object (percpu) 0x7e3bce5b888458 (size 40): comm "bash", pid 1784, jiffies 4295743894 hex dump (first 32 bytes on cpu 45): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 0): pcpu_alloc_noprof+0x4c4/0x7c0 ice_repr_create+0x66/0x130 [ice] ice_repr_create_vf+0x22/0x70 [ice] ice_eswitch_attach_vf+0x1b/0xa0 [ice] ice_reset_all_vfs+0x1dd/0x2f0 [ice] ice_pci_err_resume+0x3b/0xb0 [ice] pci_reset_function+0x8f/0x120 reset_store+0x56/0xa0 kernfs_fop_write_iter+0x120/0x1b0 vfs_write+0x31c/0x430 ksys_write+0x61/0xd0 do_syscall_64+0x5b/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e Testing hints (ethX is PF netdev): - create at least one VF echo 1 > /sys/class/net/ethX/device/sriov_numvfs - trigger the reset echo 1 > /sys/class/net/ethX/device/reset Fixes: 415db8399d06 ("ice: make representor code generic") Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-06-17net: ice: Perform accurate aRFS flow matchKrishna Kumar
This patch fixes an issue seen in a large-scale deployment under heavy incoming pkts where the aRFS flow wrongly matches a flow and reprograms the NIC with wrong settings. That mis-steering causes RX-path latency spikes and noisy neighbor effects when many connections collide on the same hash (some of our production servers have 20-30K connections). set_rps_cpu() calls ndo_rx_flow_steer() with flow_id that is calculated by hashing the skb sized by the per rx-queue table size. This results in multiple connections (even across different rx-queues) getting the same hash value. The driver steer function modifies the wrong flow to use this rx-queue, e.g.: Flow#1 is first added: Flow#1: <ip1, port1, ip2, port2>, Hash 'h', q#10 Later when a new flow needs to be added: Flow#2: <ip3, port3, ip4, port4>, Hash 'h', q#20 The driver finds the hash 'h' from Flow#1 and updates it to use q#20. This results in both flows getting un-optimized - packets for Flow#1 goes to q#20, and then reprogrammed back to q#10 later and so on; and Flow #2 programming is never done as Flow#1 is matched first for all misses. Many flows may wrongly share the same hash and reprogram rules of the original flow each with their own q#. Tested on two 144-core servers with 16K netperf sessions for 180s. Netperf clients are pinned to cores 0-71 sequentially (so that wrong packets on q#s 72-143 can be measured). IRQs are set 1:1 for queues -> CPUs, enable XPS, enable aRFS (global value is 144 * rps_flow_cnt). Test notes about results from ice_rx_flow_steer(): --------------------------------------------------- 1. "Skip:" counter increments here: if (fltr_info->q_index == rxq_idx || arfs_entry->fltr_state != ICE_ARFS_ACTIVE) goto out; 2. "Add:" counter increments here: ret = arfs_entry->fltr_info.fltr_id; INIT_HLIST_NODE(&arfs_entry->list_entry); 3. "Update:" counter increments here: /* update the queue to forward to on an already existing flow */ Runtime comparison: original code vs with the patch for different rps_flow_cnt values. +-------------------------------+--------------+--------------+ | rps_flow_cnt | 512 | 2048 | +-------------------------------+--------------+--------------+ | Ratio of Pkts on Good:Bad q's | 214 vs 822K | 1.1M vs 980K | | Avoid wrong aRFS programming | 0 vs 310K | 0 vs 30K | | CPU User | 216 vs 183 | 216 vs 206 | | CPU System | 1441 vs 1171 | 1447 vs 1320 | | CPU Softirq | 1245 vs 920 | 1238 vs 961 | | CPU Total | 29 vs 22.7 | 29 vs 24.9 | | aRFS Update | 533K vs 59 | 521K vs 32 | | aRFS Skip | 82M vs 77M | 7.2M vs 4.5M | +-------------------------------+--------------+--------------+ A separate TCP_STREAM and TCP_RR with 1,4,8,16,64,128,256,512 connections showed no performance degradation. Some points on the patch/aRFS behavior: 1. Enabling full tuple matching ensures flows are always correctly matched, even with smaller hash sizes. 2. 5-6% drop in CPU utilization as the packets arrive at the correct CPUs and fewer calls to driver for programming on misses. 3. Larger hash tables reduces mis-steering due to more unique flow hashes, but still has clashes. However, with larger per-device rps_flow_cnt, old flows take more time to expire and new aRFS flows cannot be added if h/w limits are reached (rps_may_expire_flow() succeeds when 10*rps_flow_cnt pkts have been processed by this cpu that are not part of the flow). Fixes: 28bf26724fdb0 ("ice: Implement aRFS") Signed-off-by: Krishna Kumar <krikku@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-06-17can: tcan4x5x: fix power regulator retrieval during probeBrett Werling
Fixes the power regulator retrieval in tcan4x5x_can_probe() by ensuring the regulator pointer is not set to NULL in the successful return from devm_regulator_get_optional(). Fixes: 3814ca3a10be ("can: tcan4x5x: tcan4x5x_can_probe(): turn on the power before parsing the config") Signed-off-by: Brett Werling <brett.werling@garmin.com> Link: https://patch.msgid.link/20250612191825.3646364-1-brett.werling@garmin.com Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-06-12ionic: Prevent driver/fw getting out of sync on devcmd(s)Brett Creeley
Some stress/negative firmware testing around devcmd(s) returning EAGAIN found that the done bit could get out of sync in the firmware when it wasn't cleared in a retry case. While here, change the type of the local done variable to a bool to match the return type from ionic_dev_cmd_done(). Fixes: ec8ee714736e ("ionic: stretch heartbeat detection") Signed-off-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250609212827.53842-1-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-12Merge tag 'net-6.16-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bluetooth and wireless. Current release - regressions: - af_unix: allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD Current release - new code bugs: - eth: airoha: correct enable mask for RX queues 16-31 - veth: prevent NULL pointer dereference in veth_xdp_rcv when peer disappears under traffic - ipv6: move fib6_config_validate() to ip6_route_add(), prevent invalid routes Previous releases - regressions: - phy: phy_caps: don't skip better duplex match on non-exact match - dsa: b53: fix untagged traffic sent via cpu tagged with VID 0 - Revert "wifi: mwifiex: Fix HT40 bandwidth issue.", it caused transient packet loss, exact reason not fully understood, yet Previous releases - always broken: - net: clear the dst when BPF is changing skb protocol (IPv4 <> IPv6) - sched: sfq: fix a potential crash on gso_skb handling - Bluetooth: intel: improve rx buffer posting to avoid causing issues in the firmware - eth: intel: i40e: make reset handling robust against multiple requests - eth: mlx5: ensure FW pages are always allocated on the local NUMA node, even when device is configure to 'serve' another node - wifi: ath12k: fix GCC_GCC_PCIE_HOT_RST definition for WCN7850, prevent kernel crashes - wifi: ath11k: avoid burning CPU in ath11k_debugfs_fw_stats_request() for 3 sec if fw_stats_done is not set" * tag 'net-6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits) selftests: drv-net: rss_ctx: Add test for ntuple rules targeting default RSS context net: ethtool: Don't check if RSS context exists in case of context 0 af_unix: Allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD. ipv6: Move fib6_config_validate() to ip6_route_add(). net: drv: netdevsim: don't napi_complete() from netpoll net/mlx5: HWS, Add error checking to hws_bwc_rule_complex_hash_node_get() veth: prevent NULL pointer dereference in veth_xdp_rcv net_sched: remove qdisc_tree_flush_backlog() net_sched: ets: fix a race in ets_qdisc_change() net_sched: tbf: fix a race in tbf_change() net_sched: red: fix a race in __red_change() net_sched: prio: fix a race in prio_tune() net_sched: sch_sfq: reject invalid perturb period net: phy: phy_caps: Don't skip better duplex macth on non-exact match MAINTAINERS: Update Kuniyuki Iwashima's email address. selftests: net: add test case for NAT46 looping back dst net: clear the dst when changing skb protocol net/mlx5e: Fix number of lanes to UNKNOWN when using data_rate_oper net/mlx5e: Fix leak of Geneve TLV option object net/mlx5: HWS, make sure the uplink is the last destination ...
2025-06-12Merge tag 'wireless-2025-06-12' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes Berg says: ==================== Another quick round of updates: - revert mwifiex HT40 that was causing issues - many ath10k/ath11k/ath12k fixes - re-add some iwlwifi code I lost in a merge - use kfree_sensitive() on an error path in cfg80211 * tag 'wireless-2025-06-12' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: cfg80211: use kfree_sensitive() for connkeys cleanup wifi: iwlwifi: fix merge damage related to iwl_pci_resume Revert "wifi: mwifiex: Fix HT40 bandwidth issue." wifi: ath12k: fix uaf in ath12k_core_init() wifi: ath12k: Fix hal_reo_cmd_status kernel-doc wifi: ath12k: fix GCC_GCC_PCIE_HOT_RST definition for WCN7850 wifi: ath11k: validate ath11k_crypto_mode on top of ath11k_core_qmi_firmware_ready wifi: ath11k: consistently use ath11k_mac_get_fw_stats() wifi: ath11k: move locking outside of ath11k_mac_get_fw_stats() wifi: ath11k: adjust unlock sequence in ath11k_update_stats_event() wifi: ath11k: move some firmware stats related functions outside of debugfs wifi: ath11k: don't wait when there is no vdev started wifi: ath11k: don't use static variables in ath11k_debugfs_fw_stats_process() wifi: ath11k: avoid burning CPU in ath11k_debugfs_fw_stats_request() wil6210: fix support for sparrow chipsets wifi: ath10k: Avoid vdev delete timeout when firmware is already down ath10k: snoc: fix unbalanced IRQ enable in crash recovery ==================== Link: https://patch.msgid.link/20250612082519.11447-3-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-12net: drv: netdevsim: don't napi_complete() from netpollJakub Kicinski
netdevsim supports netpoll. Make sure we don't call napi_complete() from it, since it may not be scheduled. Breno reports hitting a warning in napi_complete_done(): WARNING: CPU: 14 PID: 104 at net/core/dev.c:6592 napi_complete_done+0x2cc/0x560 __napi_poll+0x2d8/0x3a0 handle_softirqs+0x1fe/0x710 This is presumably after netpoll stole the SCHED bit prematurely. Reported-by: Breno Leitao <leitao@debian.org> Fixes: 3762ec05a9fb ("netdevsim: add NAPI support") Tested-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20250611174643.2769263-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-12net/mlx5: HWS, Add error checking to hws_bwc_rule_complex_hash_node_get()Dan Carpenter
Check for if ida_alloc() or rhashtable_lookup_get_insert_fast() fails. Fixes: 17e0accac577 ("net/mlx5: HWS, support complex matchers") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Link: https://patch.msgid.link/aEmBONjyiF6z5yCV@stanley.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-12veth: prevent NULL pointer dereference in veth_xdp_rcvJesper Dangaard Brouer
The veth peer device is RCU protected, but when the peer device gets deleted (veth_dellink) then the pointer is assigned NULL (via RCU_INIT_POINTER). This patch adds a necessary NULL check in veth_xdp_rcv when accessing the veth peer net_device. This fixes a bug introduced in commit dc82a33297fc ("veth: apply qdisc backpressure on full ptr_ring to reduce TX drops"). The bug is a race and only triggers when having inflight packets on a veth that is being deleted. Reported-by: Ihor Solodrai <ihor.solodrai@linux.dev> Closes: https://lore.kernel.org/all/fecfcad0-7a16-42b8-bff2-66ee83a6e5c4@linux.dev/ Reported-by: syzbot+c4c7bf27f6b0c4bd97fe@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/683da55e.a00a0220.d8eae.0052.GAE@google.com/ Fixes: dc82a33297fc ("veth: apply qdisc backpressure on full ptr_ring to reduce TX drops") Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org> Acked-by: Ihor Solodrai <ihor.solodrai@linux.dev> Link: https://patch.msgid.link/174964557873.519608.10855046105237280978.stgit@firesoul Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-12net: phy: phy_caps: Don't skip better duplex macth on non-exact matchMaxime Chevallier
When performing a non-exact phy_caps lookup, we are looking for a supported mode that matches as closely as possible the passed speed/duplex. Blamed patch broke that logic by returning a match too early in case the caller asks for half-duplex, as a full-duplex linkmode may match first, and returned as a non-exact match without even trying to mach on half-duplex modes. Reported-by: Jijie Shao <shaojijie@huawei.com> Closes: https://lore.kernel.org/netdev/20250603102500.4ec743cf@fedora/T/#m22ed60ca635c67dc7d9cbb47e8995b2beb5c1576 Tested-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Fixes: fc81e257d19f ("net: phy: phy_caps: Allow looking-up link caps based on speed and duplex") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20250606094321.483602-1-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-11net/mlx5e: Fix number of lanes to UNKNOWN when using data_rate_operShahar Shitrit
When the link is up, either eth_proto_oper or ext_eth_proto_oper typically reports the active link protocol, from which both speed and number of lanes can be retrieved. However, in certain cases, such as when a NIC is connected via a non-standard cable, the firmware may not report the protocol. In such scenarios, the speed can still be obtained from the data_rate_oper field in PTYS register. Since data_rate_oper provides only speed information and lacks lane details, it is incorrect to derive the number of lanes from it. This patch corrects the behavior by setting the number of lanes to UNKNOWN instead of incorrectly using MAX_LANES when relying on data_rate_oper. Fixes: 7e959797f021 ("net/mlx5e: Enable lanes configuration when auto-negotiation is off") Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/20250610151514.1094735-10-mbloch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-11net/mlx5e: Fix leak of Geneve TLV option objectJianbo Liu
Previously, a unique tunnel id was added for the matching on TC non-zero chains, to support inner header rewrite with goto action. Later, it was used to support VF tunnel offload for vxlan, then for Geneve and GRE. To support VF tunnel, a temporary mlx5_flow_spec is used to parse tunnel options. For Geneve, if there is TLV option, a object is created, or refcnt is added if already exists. But the temporary mlx5_flow_spec is directly freed after parsing, which causes the leak because no information regarding the object is saved in flow's mlx5_flow_spec, which is used to free the object when deleting the flow. To fix the leak, call mlx5_geneve_tlv_option_del() before free the temporary spec if it has TLV object. Fixes: 521933cdc4aa ("net/mlx5e: Support Geneve and GRE with VF tunnel offload") Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Alex Lazar <alazar@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/20250610151514.1094735-9-mbloch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-11net/mlx5: HWS, make sure the uplink is the last destinationVlad Dogaru
When there are more than one destinations, we create a FW flow table and provide it with all the destinations. FW requires to have wire as the last destination in the list (if it exists), otherwise the operation fails with FW syndrome. This patch fixes the destination array action creation: if it contains a wire destination, it is moved to the end. Fixes: 504e536d9010 ("net/mlx5: HWS, added actions handling") Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com> Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/20250610151514.1094735-7-mbloch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-11net/mlx5: HWS, fix missing ip_version handling in definerYevgeny Kliteynik
Fix missing field handling in definer - outer IP version. Fixes: 74a778b4a63f ("net/mlx5: HWS, added definers handling") Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/20250610151514.1094735-6-mbloch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-11net/mlx5: HWS, Init mutex on the correct pathVlad Dogaru
The newly introduced mutex is only used for reformat actions, but it was initialized for modify header instead. The struct that contains the mutex is zero-initialized and an all-zero mutex is valid, so the issue only shows up with CONFIG_DEBUG_MUTEXES. Fixes: b206d9ec19df ("net/mlx5: HWS, register reformat actions with fw") Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com> Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/20250610151514.1094735-5-mbloch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-11net/mlx5: Fix return value when searching for existing flow groupPatrisious Haddad
When attempting to add a rule to an existing flow group, if a matching flow group exists but is not active, the error code returned should be EAGAIN, so that the rule can be added to the matching flow group once it is active, rather than ENOENT, which indicates that no matching flow group was found. Fixes: bd71b08ec2ee ("net/mlx5: Support multiple updates of steering rules in parallel") Signed-off-by: Gavi Teitz <gavi@nvidia.com> Signed-off-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/20250610151514.1094735-4-mbloch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-11net/mlx5: Fix ECVF vports unload on shutdown flowAmir Tzin
Fix shutdown flow UAF when a virtual function is created on the embedded chip (ECVF) of a BlueField device. In such case the vport acl ingress table is not properly destroyed. ECVF functionality is independent of ecpf_vport_exists capability and thus functions mlx5_eswitch_(enable|disable)_pf_vf_vports() should not test it when enabling/disabling ECVF vports. kernel log: [] refcount_t: underflow; use-after-free. [] WARNING: CPU: 3 PID: 1 at lib/refcount.c:28 refcount_warn_saturate+0x124/0x220 ---------------- [] Call trace: [] refcount_warn_saturate+0x124/0x220 [] tree_put_node+0x164/0x1e0 [mlx5_core] [] mlx5_destroy_flow_table+0x98/0x2c0 [mlx5_core] [] esw_acl_ingress_table_destroy+0x28/0x40 [mlx5_core] [] esw_acl_ingress_lgcy_cleanup+0x80/0xf4 [mlx5_core] [] esw_legacy_vport_acl_cleanup+0x44/0x60 [mlx5_core] [] esw_vport_cleanup+0x64/0x90 [mlx5_core] [] mlx5_esw_vport_disable+0xc0/0x1d0 [mlx5_core] [] mlx5_eswitch_unload_ec_vf_vports+0xcc/0x150 [mlx5_core] [] mlx5_eswitch_disable_sriov+0x198/0x2a0 [mlx5_core] [] mlx5_device_disable_sriov+0xb8/0x1e0 [mlx5_core] [] mlx5_sriov_detach+0x40/0x50 [mlx5_core] [] mlx5_unload+0x40/0xc4 [mlx5_core] [] mlx5_unload_one_devl_locked+0x6c/0xe4 [mlx5_core] [] mlx5_unload_one+0x3c/0x60 [mlx5_core] [] shutdown+0x7c/0xa4 [mlx5_core] [] pci_device_shutdown+0x3c/0xa0 [] device_shutdown+0x170/0x340 [] __do_sys_reboot+0x1f4/0x2a0 [] __arm64_sys_reboot+0x2c/0x40 [] invoke_syscall+0x78/0x100 [] el0_svc_common.constprop.0+0x54/0x184 [] do_el0_svc+0x30/0xac [] el0_svc+0x48/0x160 [] el0t_64_sync_handler+0xa4/0x12c [] el0t_64_sync+0x1a4/0x1a8 [] --[ end trace 9c4601d68c70030e ]--- Fixes: a7719b29a821 ("net/mlx5: Add management of EC VF vports") Reviewed-by: Daniel Jurgens <danielj@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Amir Tzin <amirtz@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/20250610151514.1094735-3-mbloch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-11net/mlx5: Ensure fw pages are always allocated on same NUMAMoshe Shemesh
When firmware asks the driver to allocate more pages, using event of give_pages, the driver should always allocate it from same NUMA, the original device NUMA. Current code uses dev_to_node() which can result in different NUMA as it is changed by other driver flows, such as mlx5_dma_zalloc_coherent_node(). Instead, use saved numa node for allocating firmware pages. Fixes: 311c7c71c9bb ("net/mlx5e: Allocate DMA coherent memory on reader NUMA node") Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/20250610151514.1094735-2-mbloch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-11Merge branch '40GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2025-06-10 (i40e, iavf, ice, e1000) For i40e: Robert Malz improves reset handling for situations where multiple reset requests could cause some to be missed. For iavf: Ahmed adds detection, and handling, of reset that could occur early in the initialization process to stop long wait/hangs. For ice: Anton, properly, sets missed use_nsecs value. For e1000: Joe Damato moves cancel_work_sync() call to avoid deadlock. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: e1000: Move cancel_work_sync to avoid deadlock ice/ptp: fix crosstimestamp reporting iavf: fix reset_task for early reset event i40e: retry VFLR handling if there is ongoing VF reset i40e: return false from i40e_reset_vf if reset is in progress ==================== Link: https://patch.msgid.link/20250610171348.1476574-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-11net/mdiobus: Fix potential out-of-bounds clause 45 read/write accessJakub Raczynski
When using publicly available tools like 'mdio-tools' to read/write data from/to network interface and its PHY via C45 (clause 45) mdiobus, there is no verification of parameters passed to the ioctl and it accepts any mdio address. Currently there is support for 32 addresses in kernel via PHY_MAX_ADDR define, but it is possible to pass higher value than that via ioctl. While read/write operation should generally fail in this case, mdiobus provides stats array, where wrong address may allow out-of-bounds read/write. Fix that by adding address verification before C45 read/write operation. While this excludes this access from any statistics, it improves security of read/write operation. Fixes: 4e4aafcddbbf ("net: mdio: Add dedicated C45 API to MDIO bus drivers") Signed-off-by: Jakub Raczynski <j.raczynski@samsung.com> Reported-by: Wenjing Shan <wenjing.shan@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-06-11net/mdiobus: Fix potential out-of-bounds read/write accessJakub Raczynski
When using publicly available tools like 'mdio-tools' to read/write data from/to network interface and its PHY via mdiobus, there is no verification of parameters passed to the ioctl and it accepts any mdio address. Currently there is support for 32 addresses in kernel via PHY_MAX_ADDR define, but it is possible to pass higher value than that via ioctl. While read/write operation should generally fail in this case, mdiobus provides stats array, where wrong address may allow out-of-bounds read/write. Fix that by adding address verification before read/write operation. While this excludes this access from any statistics, it improves security of read/write operation. Fixes: 080bb352fad00 ("net: phy: Maintain MDIO device and bus statistics") Signed-off-by: Jakub Raczynski <j.raczynski@samsung.com> Reported-by: Wenjing Shan <wenjing.shan@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-06-11Merge tag 'ath-current-20250608' of ↵Johannes Berg
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath Jeff Johnson says: ================== ath.git updates for v6.16-rc2 Fix a handful of both build and stability issues across multiple drivers. ================== Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-11wifi: iwlwifi: fix merge damage related to iwl_pci_resumeEmmanuel Grumbach
The changes I made in wifi: iwlwifi: don't warn if the NIC is gone in resume conflicted with a major rework done in this area. The merge de-facto removed my changes. Re-add them. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://patch.msgid.link/20250603091754.70182-1-emmanuel.grumbach@intel.com Fixes: 06c4b2036818 ("Merge tag 'iwlwifi-next-2025-05-15' of https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-11Revert "wifi: mwifiex: Fix HT40 bandwidth issue."Francesco Dolcini
This reverts commit 4fcfcbe45734 ("wifi: mwifiex: Fix HT40 bandwidth issue.") That commit introduces a regression, when HT40 mode is enabled, received packets are lost, this was experience with W8997 with both SDIO-UART and SDIO-SDIO variants. From an initial investigation the issue solves on its own after some time, but it's not clear what is the reason. Given that this was just a performance optimization, let's revert it till we have a better understanding of the issue and a proper fix. Cc: Jeff Chen <jeff.chen_1@nxp.com> Cc: stable@vger.kernel.org Fixes: 4fcfcbe45734 ("wifi: mwifiex: Fix HT40 bandwidth issue.") Closes: https://lore.kernel.org/all/20250603203337.GA109929@francesco-nb/ Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://patch.msgid.link/20250605130302.55555-1-francesco@dolcini.it [fix commit reference format] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-11macsec: MACsec SCI assignment for ES = 0Carlos Fernandez
According to 802.1AE standard, when ES and SC flags in TCI are zero, used SCI should be the current active SC_RX. Current code uses the header MAC address. Without this patch, when ES flag is 0 (using a bridge or switch), header MAC will not fit the SCI and MACSec frames will be discarted. In order to test this issue, MACsec link should be stablished between two interfaces, setting SC and ES flags to zero and a port identifier different than one. For example, using ip macsec tools: ip link add link $ETH0 macsec0 type macsec port 11 send_sci off end_station off ip macsec add macsec0 tx sa 0 pn 2 on key 01 $ETH1_KEY ip macsec add macsec0 rx port 11 address $ETH1_MAC ip macsec add macsec0 rx port 11 address $ETH1_MAC sa 0 pn 2 on key 02 ip link set dev macsec0 up ip link add link $ETH1 macsec1 type macsec port 11 send_sci off end_station off ip macsec add macsec1 tx sa 0 pn 2 on key 01 $ETH0_KEY ip macsec add macsec1 rx port 11 address $ETH0_MAC ip macsec add macsec1 rx port 11 address $ETH0_MAC sa 0 pn 2 on key 02 ip link set dev macsec1 up Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Co-developed-by: Andreu Montiel <Andreu.Montiel@technica-engineering.de> Signed-off-by: Andreu Montiel <Andreu.Montiel@technica-engineering.de> Signed-off-by: Carlos Fernandez <carlos.fernandez@technica-engineering.de> Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-06-10net: airoha: Enable RX queues 16-31Lorenzo Bianconi
Fix RX_DONE_INT_MASK definition in order to enable RX queues 16-31. Fixes: f252493e18353 ("net: airoha: Enable multiple IRQ lines support in airoha_eth driver.") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20250609-aioha-fix-rx-queue-mask-v1-1-f33706a06fa2@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-10netconsole: fix appending sysdata when sysdata_fields == SYSDATA_RELEASEGustavo Luiz Duarte
Before appending sysdata, prepare_extradata() checks if any feature is enabled in sysdata_fields (and exits early if none is enabled). When SYSDATA_RELEASE was introduced, we missed adding it to the list of features being checked against sysdata_fields in prepare_extradata(). The result was that, if only SYSDATA_RELEASE is enabled in sysdata_fields, we incorreclty exit early and fail to append the release. Instead of checking specific bits in sysdata_fields, check if sysdata_fields has ALL bit zeroed and exit early if true. This fixes case when only SYSDATA_RELEASE enabled and makes the code more general / less error prone in future feature implementation. Signed-off-by: Gustavo Luiz Duarte <gustavold@gmail.com> Reviewed-by: Breno Leitao <leitao@debian.org> Fixes: cfcc9239e78a ("netconsole: append release to sysdata") Link: https://patch.msgid.link/20250609-netconsole-fix-v1-1-17543611ae31@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-10net: usb: r8152: Add device ID for TP-Link UE200Lucas Sanchez Sagrado
The TP-Link UE200 is a RTL8152B based USB 2.0 Fast Ethernet adapter. This patch adds its device ID. It has been tested on Ubuntu 22.04.5. Signed-off-by: Lucas Sanchez Sagrado <lucsansag@gmail.com> Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com> Link: https://patch.msgid.link/20250609145536.26648-1-lucsansag@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-10e1000: Move cancel_work_sync to avoid deadlockJoe Damato
Previously, e1000_down called cancel_work_sync for the e1000 reset task (via e1000_down_and_stop), which takes RTNL. As reported by users and syzbot, a deadlock is possible in the following scenario: CPU 0: - RTNL is held - e1000_close - e1000_down - cancel_work_sync (cancel / wait for e1000_reset_task()) CPU 1: - process_one_work - e1000_reset_task - take RTNL To remedy this, avoid calling cancel_work_sync from e1000_down (e1000_reset_task does nothing if the device is down anyway). Instead, call cancel_work_sync for e1000_reset_task when the device is being removed. Fixes: e400c7444d84 ("e1000: Hold RTNL when e1000_down can be called") Reported-by: syzbot+846bb38dc67fe62cc733@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/683837bf.a00a0220.52848.0003.GAE@google.com/ Reported-by: John <john.cs.hey@gmail.com> Closes: https://lore.kernel.org/netdev/CAP=Rh=OEsn4y_2LvkO3UtDWurKcGPnZ_NPSXK=FbgygNXL37Sw@mail.gmail.com/ Signed-off-by: Joe Damato <jdamato@fastly.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Acked-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-06-10ice/ptp: fix crosstimestamp reportingAnton Nadezhdin
Set use_nsecs=true as timestamp is reported in ns. Lack of this result in smaller timestamp error window which cause error during phc2sys execution on E825 NICs: phc2sys[1768.256]: ioctl PTP_SYS_OFFSET_PRECISE: Invalid argument This problem was introduced in the cited commit which omitted setting use_nsecs to true when converting the ice driver to use convert_base_to_cs(). Testing hints (ethX is PF netdev): phc2sys -s ethX -c CLOCK_REALTIME -O 37 -m phc2sys[1769.256]: CLOCK_REALTIME phc offset -5 s0 freq -0 delay 0 Fixes: d4bea547ebb57 ("ice/ptp: Remove convert_art_to_tsc()") Signed-off-by: Anton Nadezhdin <anton.nadezhdin@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-06-10iavf: fix reset_task for early reset eventAhmed Zaki
If a reset event is received from the PF early in the init cycle, the state machine hangs for about 25 seconds. Reproducer: echo 1 > /sys/class/net/$PF0/device/sriov_numvfs ip link set dev $PF0 vf 0 mac $NEW_MAC The log shows: [792.620416] ice 0000:5e:00.0: Enabling 1 VFs [792.738812] iavf 0000:5e:01.0: enabling device (0000 -> 0002) [792.744182] ice 0000:5e:00.0: Enabling 1 VFs with 17 vectors and 16 queues per VF [792.839964] ice 0000:5e:00.0: Setting MAC 52:54:00:00:00:11 on VF 0. VF driver will be reinitialized [813.389684] iavf 0000:5e:01.0: Failed to communicate with PF; waiting before retry [818.635918] iavf 0000:5e:01.0: Hardware came out of reset. Attempting reinit. [818.766273] iavf 0000:5e:01.0: Multiqueue Enabled: Queue pair count = 16 Fix it by scheduling the reset task and making the reset task capable of resetting early in the init cycle. Fixes: ef8693eb90ae3 ("i40evf: refactor reset handling") Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Tested-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-06-10i40e: retry VFLR handling if there is ongoing VF resetRobert Malz
When a VFLR interrupt is received during a VF reset initiated from a different source, the VFLR may be not fully handled. This can leave the VF in an undefined state. To address this, set the I40E_VFLR_EVENT_PENDING bit again during VFLR handling if the reset is not yet complete. This ensures the driver will properly complete the VF reset in such scenarios. Fixes: 52424f974bc5 ("i40e: Fix VF hang when reset is triggered on another VF") Signed-off-by: Robert Malz <robert.malz@canonical.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-06-10i40e: return false from i40e_reset_vf if reset is in progressRobert Malz
The function i40e_vc_reset_vf attempts, up to 20 times, to handle a VF reset request, using the return value of i40e_reset_vf as an indicator of whether the reset was successfully triggered. Currently, i40e_reset_vf always returns true, which causes new reset requests to be ignored if a different VF reset is already in progress. This patch updates the return value of i40e_reset_vf to reflect when another VF reset is in progress, allowing the caller to properly use the retry mechanism. Fixes: 52424f974bc5 ("i40e: Fix VF hang when reset is triggered on another VF") Signed-off-by: Robert Malz <robert.malz@canonical.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-06-08treewide, timers: Rename from_timer() to timer_container_of()Ingo Molnar
Move this API to the canonical timer_*() namespace. [ tglx: Redone against pre rc1 ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
2025-06-07wifi: ath12k: fix uaf in ath12k_core_init()Miaoqing Pan
When the execution of ath12k_core_hw_group_assign() or ath12k_core_hw_group_create() fails, the registered notifier chain is not unregistered properly. Its memory is freed after rmmod, which may trigger to a use-after-free (UAF) issue if there is a subsequent access to this notifier chain. Fixes the issue by calling ath12k_core_panic_notifier_unregister() in failure cases. Call trace: notifier_chain_register+0x4c/0x1f0 (P) atomic_notifier_chain_register+0x38/0x68 ath12k_core_init+0x50/0x4e8 [ath12k] ath12k_pci_probe+0x5f8/0xc28 [ath12k] pci_device_probe+0xbc/0x1a8 really_probe+0xc8/0x3a0 __driver_probe_device+0x84/0x1b0 driver_probe_device+0x44/0x130 __driver_attach+0xcc/0x208 bus_for_each_dev+0x84/0x100 driver_attach+0x2c/0x40 bus_add_driver+0x130/0x260 driver_register+0x70/0x138 __pci_register_driver+0x68/0x80 ath12k_pci_init+0x30/0x68 [ath12k] ath12k_init+0x28/0x78 [ath12k] Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: 6f245ea0ec6c ("wifi: ath12k: introduce device group abstraction") Signed-off-by: Miaoqing Pan <miaoqing.pan@oss.qualcomm.com> Reviewed-by: Baochen Qiang <quic_bqiang@quicinc.com> Link: https://patch.msgid.link/20250604055250.1228501-1-miaoqing.pan@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-06-07wifi: ath12k: Fix hal_reo_cmd_status kernel-docJeff Johnson
Currently a warning is reported when running: % scripts/kernel-doc -Wall -Werror -none drivers/net/wireless/ath/ath12k/hal.h Warning: drivers/net/wireless/ath/ath12k/hal.h:596 Enum value 'HAL_REO_CMD_RESOURCE_BLOCKED' not described in enum 'hal_reo_cmd_status' Add the missing description of HAL_REO_CMD_RESOURCE_BLOCKED. Link: https://patch.msgid.link/20250605-hal_reo_cmd_status-kdoc-v1-1-e59f4b814b88@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-06-07wifi: ath12k: fix GCC_GCC_PCIE_HOT_RST definition for WCN7850Baochen Qiang
GCC_GCC_PCIE_HOT_RST is wrongly defined for WCN7850, causing kernel crash on some specific platforms. Since this register is divergent for WCN7850 and QCN9274, move it to register table to allow different definitions. Then correct the register address for WCN7850 to fix this issue. Note IPQ5332 is not affected as it is not PCIe based device. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Reported-by: Parth Pancholi <parth.pancholi@toradex.com> Closes: https://lore.kernel.org/all/86899b2235a59c9134603beebe08f2bb0b244ea0.camel@gmail.com Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Tested-by: Parth Pancholi <parth.pancholi@toradex.com> Link: https://patch.msgid.link/20250523-ath12k-wrong-global-reset-addr-v1-1-3b06eb556196@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-06-07wifi: ath11k: validate ath11k_crypto_mode on top of ↵Rodrigo Gobbi
ath11k_core_qmi_firmware_ready if ath11k_crypto_mode is invalid (not ATH11K_CRYPT_MODE_SW/ATH11K_CRYPT_MODE_HW), ath11k_core_qmi_firmware_ready() will not undo some actions that was previously started/configured. Do the validation as soon as possible in order to avoid undoing actions in that case and also to fix the following smatch warning: drivers/net/wireless/ath/ath11k/core.c:2166 ath11k_core_qmi_firmware_ready() warn: missing unwind goto? Signed-off-by: Rodrigo Gobbi <rodrigo.gobbi.7@gmail.com> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Closes: https://lore.kernel.org/r/202304151955.oqAetVFd-lkp@intel.com/ Fixes: aa2092a9bab3 ("ath11k: add raw mode and software crypto support") Reviewed-by: Baochen Qiang <quic_bqiang@quicinc.com> Link: https://patch.msgid.link/20250522200519.16858-1-rodrigo.gobbi.7@gmail.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-06-07wifi: ath11k: consistently use ath11k_mac_get_fw_stats()Baochen Qiang
Currently to get firmware stats, ath11k_mac_op_get_txpower() calls ath11k_fw_stats_request() and ath11k_mac_op_sta_statistics() calls ath11k_mac_get_fw_stats(). Those two helpers are basically doing the same, except for: 1. ath11k_mac_get_fw_stats() verifies ar->state inside itself. 2. ath11k_mac_get_fw_stats() calls ath11k_mac_fw_stats_request() which then calls ath11k_mac_fw_stats_reset() to free pdev/vdev stats whereas only pdev stats are freed by ath11k_fw_stats_request(). 3. ath11k_mac_get_fw_stats() waits for ar->fw_stats_complete and ar->fw_stats_done, whereas ath11k_fw_stats_request() only waits for ar->fw_stats_complete. Change to call ath11k_mac_get_fw_stats() in ath11k_mac_op_get_txpower(). This is valid because: 1. ath11k_mac_op_get_txpower() also has the same request on ar->state. 2. it is harmless to call ath11k_fw_stats_vdevs_free() since ar->fw_stats.vdevs should be empty and there should be no one expecting it at that time. 3. ath11k_mac_op_get_txpower() only needs pdev stats. For pdev stats, ar->fw_stats_done is set to true whenever ar->fw_stats_complete is set to true in ath11k_update_stats_event(). So additional wait on ar->fw_stats_done does not wast any time. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250220082448.31039-8-quic_bqiang@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-06-07wifi: ath11k: move locking outside of ath11k_mac_get_fw_stats()Baochen Qiang
Currently ath11k_mac_get_fw_stats() is acquiring/releasing ar->conf_mutex by itself. In order to reuse this function in a context where that lock is already taken, move lock handling to its callers, then the function itself only has to assert it. There is only one caller now, i.e., ath11k_mac_op_sta_statistics(), so add lock handling there. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250220082448.31039-7-quic_bqiang@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-06-07wifi: ath11k: adjust unlock sequence in ath11k_update_stats_event()Baochen Qiang
Currently RCU lock and ar->data_lock are acquired in a sequence of rcu_read_lock() spin_lock_bh(&ar->data_lock) but released in a sequence of rcu_read_unlock() spin_unlock_bh(&ar->data_lock) Although there are no apparent issues with this, reorder them to achieve symmetry. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Kalle Valo <kvalo@kernel.org> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250220082448.31039-6-quic_bqiang@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
generated by cgit (git 2.34.1) at 2025-07-15 11:03:50 +0000