summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2025-05-06wifi: iwlwifi: cfg: remove unnecessary configsJohannes Berg
Since there are two bytes hole in struct iwl_dev_info, add a subdev_mask to match with. Also, since the PCI IDs list needs to match first, and the dev-info list is matched from the bottom up, remove unnecessary entries. With this, even though there are new entries from previous changes, the overall size is slightly reduced. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502155404.689f9b335cbe.I66f1344b6ac7aa3665696637c97fa843c2307423@changeid
2025-05-06wifi: iwlwifi: cfg: reduce mac_type to u8Johannes Berg
In theory, this should be 12 bits, but in practice all the values we use now fit into 8 bits, so change the mac_type to make room in struct iwl_dev_info. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502155404.c17d56f4ae0f.I487c8df18aa33c46aa6813bf5aebb5a23da67600@changeid
2025-05-06wifi: iwlwifi: tests: check for duplicate name stringsJohannes Berg
We don't need the same name multiple times in the binary, add a check for that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502155404.9adf2790122e.Ia85152c072c7944f0b80e819cf59a51d6adeb49a@changeid
2025-05-06wifi: iwlwifi: cfg: move all names out of configsJohannes Berg
Move all the names into dev info structs and remove the pointer from the configs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502155404.1538369bffde.Id430ff71f57cbb37c19ecc5b41c831e5ba9b0695@changeid
2025-05-06wifi: iwlwifi: cfg: finish config splitJohannes Berg
A long time ago, when transport vs. device configs were introduced, we wanted to eventually have a list of PCI IDs and a separate list of devices, but for simplicity embedded the transport config in the whole config, and it all got confusing. Finish splitting that out. Doing so requires having more IWL_DEV_INFO() entries, but the whole trans/cfg aliasing goes away and the code becomes a lot simpler. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502155404.e03f65c0f693.I076a997f800db455b575008f9488b151738ad7ec@changeid
2025-05-06wifi: iwlwifi: cfg: minor fixes for ScJohannes Berg
Remove the erroneously named IWL_DEVICE_BZ_COMMON macro from the Sc file and fix some indentation. Also bump the minimum FW version since it's not released yet anyway, right now this is mostly to make the config different from iwl_bz_cfg which would otherwise be the same with the upcoming transport config cleanups. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502155404.b313d54b8809.Ia975b6d5460996f2a2761dd3d0fef4a56f1f3e24@changeid
2025-05-06wifi: iwlwifi: pcie: remove 'ent' argument from allocJohannes Berg
The alloc function iwl_trans_pcie_alloc() doesn't use the 'ent' argument, so remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502155404.0351805072bc.Id309b38817edc116bf9a921608a93b7734f21b05@changeid
2025-05-06wifi: iwlwifi: cfg: rename BW_NO_LIMIT to BW_NOT_LIMITEDJohannes Berg
It's not clear that it makes sense to have any matches for IWL_CFG_ANY for this bit, but let's assume for now that this makes sense. Then, it's clearer to call this BW_NOT_LIMITED rather than BW_NO_LIMIT, since the last change. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502155404.9b39693b505c.Ib47aa6a072a0e61bbba28383ce54764cd859f19c@changeid
2025-05-06wifi: iwlwifi: cfg: clean up BW limit and subdev matchingJohannes Berg
The BW limit, cores and RF ID are matched in the subdevice ID, so it doesn't really make sense to have both SUBDEV() match and a match on any of those three. In particular, for Killer devices the subdevice ID doesn't even follow the layout, so no matching should be on those three values at all, only with SUBDEV(). Change the logic around the BW limit to have it more like all the other things: only a bw_limit match in the dev_info, and put the actual bandwidth into struct iwl_cfg. This duplicates a number of those values, but that way the logic is clearer. Add a test that checks that the three matches mentioned above are not used in conjunction with SUBDEV(), and check that if the bw_limit is matched, a BW limit is provided in the config. Also check that the "Killer" devices have a SUBDEV() match. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502155404.a185eac2736c.I87ee87300c92518a1d3296d3eda9fd4163e9085e@changeid
2025-05-06wifi: iwlwifi: tests: check transport configs are not duplicatedJohannes Berg
Add a kunit test to check that all (used) transport config structs are not duplicated, since there's no value in having the same info in two places in memory. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502155404.a151af19aaba.Id57f099a899e09318c6218ed1859151f00232b41@changeid
2025-05-06wifi: iwlwifi: tests: check configs are not duplicatedJohannes Berg
Add a kunit test to check that all (used) config structs are not duplicated, ignoring the name since that can be handled differently via the dev-info list. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502155404.0cfd9fb8322e.I9567b839405be8d1e4be0bfca7a17b5d222b0158@changeid
2025-05-06wifi: iwlwifi: cfg: remove iwl_cfg_brJohannes Berg
This is the same as iwl_cfg_dr, just different by the MAC, so no need to keep a separate config; remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502155404.83b86e8a182b.Iec7f3027e7058005a98ff6d05cc224ab61b7c44a@changeid
2025-05-06wifi: iwlwifi: cfg: remove duplicated Sc device configsJohannes Berg
The configurations for Sc, Sc2 and Sc2f are all the same, so keep just a single config struct. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.2bab15a21306.I079987bc4a1679789bacc1078952aa90c805ffe0@changeid
2025-05-06wifi: iwlwifi: cfg: remove duplicated iwl_cfg_glJohannes Berg
This really is the same device as covered by iwl_cfg_bz, just the discrete version. Since discrete vs integrated is handled in the transport config, there's no need to have both. Remove iwl_cfg_gl. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.fbb78183dc85.Ic5429009677ae1023cf1f43a655e90409a30c493@changeid
2025-05-06wifi: iwlwifi: cfg: remove iwl_ax201_cfg_qu_hrJohannes Berg
We can handle the name differently, so do that and remove the extra config entry. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.17fc47c72232.I2cb4476b9bca6e770bd375ad6ce650553dbde0f1@changeid
2025-05-06wifi: iwlwifi: cfg: remove max_tx_agg_sizeJohannes Berg
This was used in some really old devices, and then got carried forward to Qu devices, even though on those we don't need it at all since the TX aggregation start is offloaded to the firmware. Remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.9c2689e2ca8e.I8274b29ca64d9ef9d1e357bbe34ca3a4b97aeb7a@changeid
2025-05-06wifi: iwlwifi: cfg: remove unused config externsJohannes Berg
There are two killer configs that no longer exist, remove the externs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.64977630101f.I9997a72027d37249620a78091759fa44f9d32c87@changeid
2025-05-06wifi: iwlwifi: cfg: unify Killer 1650s/i with Qu/HrJohannes Berg
These configs are the same except for the name, but we can use a separate per-device name to override the name. So do that, and remove the separate configs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.a0a8ebbd473a.Iad8bff04138538a8bc9f7920077ea24a699b1ed4@changeid
2025-05-06wifi: iwlwifi: cfg: unify Qu/QuZ configsJohannes Berg
Now that the fw_name_mac is no longer around and derived from the MAC type automatically, we no longer need to have different configurations for Qu/QuZ. Combine them. For the killer AX1650s/i, also fix the names, there was a mixup. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.957fbb5437ce.If51ad0b2c8afaaa131208125af3bc292793613bb@changeid
2025-05-06wifi: iwlwifi: cfg: remove fw_name_macJohannes Berg
Instead of having fw_name_mac in the config, derive it from the MAC type instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.8dba9a2d3546.I41fa594d6a0be163444b90c1ed4b441a949d3899@changeid
2025-05-06wifi: iwlwifi: tests: check for device namesJohannes Berg
Add a unit test that checks that each device has a name, either via the specific name entry or the config's name. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.c04287134280.Iedc7c05a41dc8bfe04dc8b95fea38543513eac2d@changeid
2025-05-06wifi: iwlwifi: pcie: add entry for Killer AX1650i on AdL-PJohannes Berg
On AdL-P, we're missing an entry for the Killer(R) Wi-Fi 6 AX1650i 160 MHz adapter. Add an entry to fix that. Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219114 Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.483214386aa4.Iad4d2041bfe544875fe9f5c051e23a765f862786@changeid
2025-05-06wifi: iwlwifi: unify some configurationsJohannes Berg
Rather than having individual entries for different MAC and RF steps, unify the entries by using fw_name_mac and remove the now duplicated ones. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.b93f34a65822.I57b8235acb675cb6b4e97df2f4a7365f3d9bff18@changeid
2025-05-06wifi: iwlwifi: remove duplicated lineMiri Korenblit
This line was duplicated by mistake, remove one occurrence. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.a2601e0a08e0.Ie72fadec40e41b8197bfdae16eaa430c64a3e62d@changeid
2025-05-06wifi: iwlwifi: pcie: Add support for new device idsSomashekhar Puttagangaiah
Add device support for PeP on ScP Signed-off-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.a66928fcc82a.Icbbc7c28855f8de232cb3916901a4da3ac286117@changeid
2025-05-06wifi: iwlwifi: remove TH/TH1 RF typesJohannes Berg
There are the same values as JF2/JF1 respectively, and that really matches the code names. Remove TH/TH1. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.7677cffdfae2.Idd76734c310cf5f27de43d24e71b27467ab5905a@changeid
2025-05-06wifi: iwlwifi: clean up config macroJohannes Berg
The IWL_DEV_INFO() macro has far too many arguments, and most of the time they're just "ANY". Use C99 initializers in the macro to clean that up. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250502151751.42318bb31f0e.Ic3a40afcd182b6e1802bb8f8a1a845b20608e328@changeid
2025-05-06wifi: iwlwifi: mvm: remove nl80211 testmodeJohannes Berg
This was used in the past for NoA and/or beacon filter testing, but these days everything is tested via debugfs or special FW commands, so remove the testmode. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430155443.751018e0ed8e.I21557a9a3d57234187f1b0b2182a1714ecc66b9a@changeid
2025-05-06wifi: iwlwifi: mld: set rx_mpdu_cmd_hdr_sizeJohannes Berg
Set rx_mpdu_cmd_hdr_size so that tracing will correctly include the frame header. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430155443.caf1d8e2bae3.I82d89bc8d128f78159a8a11b1573574dacdeb99e@changeid
2025-05-06wifi: iwlwifi: dvm: fix various W=1 warningsJohannes Berg
Fix warnings occurring with W=1, mostly const and one about pointer arithmetic. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430155443.3ef1e4f1cccb.Ic41d3f3721e8bd9df9cd50242232110c4a93e873@changeid
2025-05-06wifi: iwlwifi: mld: force the responder to use the full bandwidthAvraham Stern
When a soft AP is started, it may not use the full configured bandwidth (e.g. if no station is connected). As a result, the responder will not support the configured bandwidth. Since the responder supports ranging with unassociated stations, there is no indication to the driver when the full bandwidth should be enabled. Fix it by configuring the AP to always use the full bandwidth when a responder is supported. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430155443.620fe8099fff.Id50675f4d4c524b0a7ee602c48af538a327010e0@changeid
2025-05-06wifi: iwlwifi: mld: start AP with the correct bandwidthAvraham Stern
When a channel context is added, it is still not assigned to the link and the link is not yet active. As a result, the channel context min_def is used when the AP is started, even when the full bandwidth should be used. Fix it by updating the PHY channel context when the link is already active so the full bandwidth is used when needed. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430155443.30b043b10fb1.I62c2aa58687e4796b759fa68132122119a337b49@changeid
2025-05-06wifi: iwlwifi: mld: add monitor internal stationDaniel Gabay
This is needed for TX injection over monitor interface. Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430155443.5ec460d3f1c2.Ic8456efb4cdd722dcd9c4910a1569ef9d3e4e066@changeid
2025-05-06wifi: iwlwifi: mld: support for COMPRESSED_BA_RES_API_S_VER_7Emmanuel Grumbach
The rate format changed but since we don't use the rate, just claim support for this new API. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430155443.c4be90e242ff.Ie8a0f0d6320613bd8c5cb6c82a063069fffa3b67@changeid
2025-05-06wifi: iwlwifi: mvm: support iwl_mac_power_cmd version 2Miri Korenblit
This version fixes the issue that was worked around by iwl_mvm_smps_workaround. So for FWs with the new version don't do the workaround, and set new bit added in this version when appropriate. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://patch.msgid.link/20250430155443.5c9a0181a84b.I9a03bc07a7b3f6e37cc1c0c1af5719e765a05897@changeid
2025-05-06wifi: iwlwifi: implement TOP resetJohannes Berg
Implement TOP reset (new in the SC family), which resets much of the (shared) hardware without resetting the bus interfaces. Use it to recover from TOP fatal error, or if manually used; we'll need to add using it for FSEQ updates later. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430155443.12f38024a3b4.I9c22f6c4f6de64f3b34ccd898370ec1859ab7dbf@changeid
2025-05-06Merge tag 'v6.15-rc5' into x86/msr, to pick up fixes and to resolve conflictsIngo Molnar
Conflicts: drivers/cpufreq/intel_pstate.c Signed-off-by: Ingo Molnar <mingo@kernel.org>
2025-05-06wifi: iwlwifi: mld: handle SW reset w/o NIC errorJohannes Berg
For the upcoming TOP reset, the sw_reset() method may be called without nic_error() before it. In this case, also abort any still pending scans and set in_hw_restart. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430155443.b732ff4e9f31.I3948c2d892f1ee82b3a6bf9f123be02a1eaa82e5@changeid
2025-05-06wifi: iwlwifi: mvm: support ROC command version 6Miri Korenblit
This was suppsed to be supported only in iwlmld, but turns out that it will be needed also in iwlmvm. Add support for it. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://patch.msgid.link/20250430155443.d118ee63aca4.I12ea349ca6587d8ea606f6ece4a9f3c0c2bb1494@changeid
2025-05-06wifi: iwlwifi: mld: support iwl_mac_power_cmd version 2Miri Korenblit
This version fixes the issue that was worked around by iwl_mld_smps_wa. So for FWs with the new version don't do the workaround, and set new bit added in this version when appropriate. While at it, rename iwl_mld_smps_wa to iwl_mld_smps_workaround. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://patch.msgid.link/20250430155443.77fdb18d1ee0.I93688612ac4f6ec99da9bc54bee16554ef40a40b@changeid
2025-05-06wifi: iwlwifi: add support for ALIVE v8Emmanuel Grumbach
The firmware added a field to describe the platform Id. Just print it. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430155443.dc387ae36e0f.Iafd364c6b23749597b658015be97295ad0c1730d@changeid
2025-05-06wifi: iwlwifi: mld: add kunit test for emlsr with bt onSomashekhar Puttagangaiah
add kunit test to validate entering and exiting emlsr scenarios when the bt is on with certain penalty on wifi. Signed-off-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430155443.6621494fa412.If89b4b2dab308d825ca02284dd8e0030675d7af5@changeid
2025-05-06wifi: iwlwifi: fw: support PPAG command version 7Pagadala Yesu Anjaneyulu
PPAG command version 7 will send exact data read from BIOS to firmware without filtering/altering BIOS data. This enables the driver to become purely a pipe for this feature. Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430151952.88ed7b2cadef.Iad78f6cec617d1f111b704352795dde81af71a99@changeid
2025-05-06wifi: iwlwifi: fw: support reading PPAG BIOS table revision 4Pagadala Yesu Anjaneyulu
PPAG revision 4 data has more supported bits than supported in version 6 of PPAG command. So, adjust by masking accordingly to firmware acceptance. Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430151952.f1cb31f9f6ab.I56d6887866f76fd02b2cd298e3de1189c6d3890e@changeid
2025-05-06wifi: iwlwifi: rename ppag_ver to ppag_bios_revPagadala Yesu Anjaneyulu
ppag_ver variable is holding PPAG BIOS revision but name misleading as PPAG command API version, So rename to ppag_bios_rev. This will improve code readability but doesn't alter behaviour. Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430151952.be51850947df.If81d88cd2d38299faf1e2a3db5efbc021650f907@changeid
2025-05-06wifi: iwlwifi: mld: don't return an error if the FW is deadMiri Korenblit
If iwl_mld_change_vif_links failed to add the requested link(s) because the FW is dead (error before recovery), there is no point in returning an error value, as the reconfig will re-add the link(s) after the FW is started. Return 0 in that case, and WARN in the others. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250430151952.c549c72b1f37.I445bf723e9befc9541b4abd0ec7c72db8f1ff177@changeid
2025-05-06wifi: iwlwifi: mld: check for NULL before referencing a pointerMiri Korenblit
Errors can happen, and it is better not to risk with a NULL pointer dereference. Make sure that the links-to-remove pointers are not NULL before dereferencing it. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250430151952.408652d45cda.I1bb72836dab17895a2e39910e4493d667db0fa80@changeid
2025-05-06wifi: iwlwifi: mld: allow EMLSR with 2.4 GHz when BT is ONSomashekhar Puttagangaiah
When BT is ON, EMLSR with one of the links operating on 2.4 GHz is allowed only if it meets following conditions. In this patch: 1. during link selection, when BT is ON, allow emlsr only if BT pentalty is < 7%. 2. exit EMLSR if BT is turned ON and one of the links is operating on 2.4 GHz with BT penalty > 7% Signed-off-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430151952.d30212ec3901.I48e3d5bd6b0b8583f98057c38d2ee30fff5abd8a@changeid
2025-05-06wifi: iwlwifi: implement TOP reset followerJohannes Berg
For the upcoming SC hardware, a new reset mode "(silent) TOP reset" will be available. When BT initiates that reset, it'll negotiate with the WiFi firmware which makes it appear to the driver as the reset interrupt. To distinguish it from all the other reasons for the reset interrupt, there's (now) a status field in CSR 0x110. Implement the part of TOP reset where we react to BT doing it. This requires disambiguating the interrupt, depending on the state of the device, since we can even get TOP reset from BT while waiting for the reset handshake. If TOP reset is done by BT while we're not trying to do reset anyway, then simply reprobe, since we cannot keep the state of the device as it's being reset, after waiting the needed 180ms to let the device reset/settle. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430151952.fb86bfbdca40.Ibe40bf54003e3f8929b671324a395e76eb64a4d8@changeid
2025-05-06wifi: iwlwifi: avoid scheduling restart during restartJohannes Berg
When a restart is in progress, it can be async due to the next worker being scheduled in mac80211 (restart work) or the driver itself (reprobe). Avoid scheduling another restart during this period. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250430151952.db428503ec3c.I3f2be3d72a9d40cfb4e697cdab1cd2866a9262bc@changeid
generated by cgit (git 2.34.1) at 2025-07-15 17:48:19 +0000