| Age | Commit message (Collapse) | Author |
|---|
|
The j721e driver has a single platform driver that can be built-in or a
loadable module, but it calls two separate backend drivers depending on
whether it is a host or endpoint.
If the two modes are not the same, we can end up with a situation where the
built-in pci-j721e driver tries to call the modular host or endpoint
driver, which causes a link failure:
ld.lld-21: error: undefined symbol: cdns_pcie_ep_setup
>>> referenced by pci-j721e.c
>>> drivers/pci/controller/cadence/pci-j721e.o:(j721e_pcie_probe) in archive vmlinux.a
ld.lld-21: error: undefined symbol: cdns_pcie_host_setup
>>> referenced by pci-j721e.c
>>> drivers/pci/controller/cadence/pci-j721e.o:(j721e_pcie_probe) in archive vmlinux.a
Rework the dependencies so that the 'select' is done by the common Kconfig
symbol, based on which of the two are enabled. Effectively this means that
having one built-in makes the other either built-in or disabled, but all
configurations will now build.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://patch.msgid.link/20250423162523.2060405-1-arnd@kernel.org
|
|
The 'pci-j721e.c' driver is the application/glue/wrapper driver for the
Cadence PCIe Controllers on TI SoCs. Implement support for building it as a
loadable module.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/20250417124408.2752248-5-s-vadapalli@ti.com
|
|
Currently, the Cadence PCIe controller driver can be built as a built-in
module only. Since PCIe functionality is not a necessity for booting, add
support to build the Cadence PCIe driver as a loadable module as well.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/20250417124408.2752248-2-s-vadapalli@ti.com
|
|
Fix typos.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
The J721E PCIe is hardware specific to TI SoC parts so add a dependency
on that so it's available for those SoC parts and for compile testing but
not necessarily everyone who enables the Cadence PCIe controller.
Link: https://lore.kernel.org/linux-pci/20240104213910.1426843-1-pbrobinson@gmail.com
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
Use "PCIe controller" consistently instead of "host bridge", "bus driver",
etc. Annotate with "(host mode)" or "(endpoint mode)" as needed.
Link: https://lore.kernel.org/r/20230418174336.145585-5-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Add support for PCIe controller in J721E SoC. The controller uses the
Cadence PCIe core programmed by pcie-cadence*.c. The PCIe controller
will work in both host mode and device mode.
Some of the features of the controller are:
*) Supports both RC mode and EP mode
*) Supports MSI and MSI-X support
*) Supports upto GEN3 speed mode
*) Supports SR-IOV capability
*) Ability to route all transactions via SMMU (support will be added
in a later patch).
Link: https://lore.kernel.org/r/20200722110317.4744-14-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
|
|
Cadence core library files may be used by various platform drivers.
Add a new directory "cadence" to group all the Cadence core library files
and the platforms using Cadence core library.
Signed-off-by: Tom Joseph <tjoseph@cadence.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
|
