summaryrefslogtreecommitdiff
path: root/drivers/pci/controller/dwc/pci-imx6.c
AgeCommit message (Collapse)Author
2025-04-27PCI: imx6: Save and restore the LUT setting during suspend/resume for i.MX95 SoCRichard Zhu
The look up table (LUT) setting would be lost during the PCIe suspend on i.MX95 SoC. So to ensure proper functionality after resume, save it during suspend and restore it while resuming. Fixes: 9d6b1bd6b3c8 ("PCI: imx6: Add i.MX8MQ, i.MX8Q and i.MX95 PM support") Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> [mani: subject and description rewording] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://patch.msgid.link/20250416081314.3929794-8-hongxing.zhu@nxp.com
2025-04-27PCI: imx6: Add PLL lock check for i.MX95 SoCRichard Zhu
PLL lock is required to ensure that the PLL clock is stable before enabling the controller in i.MX95 SoC. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> [mani: subject and description rewording] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://patch.msgid.link/20250416081314.3929794-7-hongxing.zhu@nxp.com
2025-04-27PCI: imx6: Add workaround for errata ERR051586Richard Zhu
ERR051586: Compliance with 8GT/s Receiver Impedance ECN. The default value of GEN3_RELATED_OFF[GEN3_ZRXDC_NONCOMPL] is 1 which makes receiver non-compliant with the ZRX-DC parameter for 2.5 GT/s when operating at 8 GT/s or higher. It causes unnecessary timeout in L1. So the workaround is to set GEN3_RELATED_OFF[GEN3_ZRXDC_NONCOMPL] to 0. Add this workaround in the dw_pcie_host_ops::post_init() callback for i.MX95 platforms. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> [mani: subject and description rewording] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://patch.msgid.link/20250416081314.3929794-6-hongxing.zhu@nxp.com
2025-04-27PCI: imx6: Add workaround for errata ERR051624Richard Zhu
ERR051624: The Controller Without Vaux Cannot Exit L23 Ready Through Beacon or PERST# De-assertion When the auxiliary power is not available, the controller cannot exit from L23 Ready with beacon or PERST# de-assertion when main power is not removed. So the workaround is to set SS_RW_REG_1[SYS_AUX_PWR_DET] to 1. This workaround is required irrespective of whether Vaux is supplied to the link partner or not. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> [mani: subject and description rewording] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://patch.msgid.link/20250416081314.3929794-5-hongxing.zhu@nxp.com
2025-04-27PCI: imx6: Toggle the core reset for i.MX95 PCIeRichard Zhu
Add toggling core reset for i.MX95 to align with PHY's power-up sequence. Note that the register is named as IMX95_PCIE_COLD_RST in hardware, though it is used to reset the PCIe core. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> [mani: subject and description rewording] Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20250416081314.3929794-4-hongxing.zhu@nxp.com
2025-04-27PCI: imx6: Call dw_pcie_wait_for_link() from start_link() callback only when ↵Richard Zhu
required Since the DWC driver is already calling dw_pcie_wait_for_link() after calling the start_link() callback, remove the redundant dw_pcie_wait_for_link() call from imx_pcie_start_link(). It is still required to call this function for controllers supporting Gen 2 and higher link speeds. Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> [mani: subject and description rewording] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20250416081314.3929794-3-hongxing.zhu@nxp.com
2025-04-27PCI: imx6: Skip link up workaround for newer platformsRichard Zhu
The current link setup procedure has one workaround to detect the devices behind PCIe switches on some i.MX6 platforms. But this workaround is not needed on recent i.MX7 platforms. So skip the workaround for platforms that do not set the flag and start LTSSM directly. Also, change the flag name from IMX_PCIE_FLAG_IMX_SPEED_CHANGE to IMX_PCIE_FLAG_SPEED_CHANGE_WORKAROUND to match the usecase. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> [mani: subject and description rewording] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://patch.msgid.link/20250416081314.3929794-2-hongxing.zhu@nxp.com
2025-03-27Merge branch 'pci/controller/dwc-cpu-addr-fixup'Bjorn Helgaas
- Ioremap() msg_res region using res->start (the CPU address), not the ATU 'cpu_addr', which will be replaced with the ATU input address (which may not be the CPU address) (Frank Li) - Rename struct dw_pcie_ob_atu_cfg.cpu_addr to 'parent_bus_addr' (Frank Li) - Call devm_pci_alloc_host_bridge() early in dw_pcie_host_init() to keep devicetree-related code together (Frank Li) - Consolidate devicetree handling in dw_pcie_host_get_resources() (Bjorn Helgaas) - Add dw_pcie_parent_bus_offset() to look up the parent bus address of a specified 'reg' property and return the offset from the CPU physical address (Frank Li) - Add cross-checking with .cpu_addr_fixup() and debug logging to dw_pcie_parent_bus_offset() (Frank Li) - Use devicetree 'reg[config]' via dw_pcie_parent_bus_offset() to derive CPU -> ATU addr offset for host controller (Frank Li) - Call epc_create() early in dw_pcie_ep_init() to keep devicetree-related code together (Bjorn Helgaas) - Consolidate devicetree handling in dw_pcie_ep_get_resources() (Bjorn Helgaas) - Use devicetree 'reg[addr_space]' via dw_pcie_parent_bus_offset() to derive CPU -> ATU addr offset for endpoint controller (Frank Li) - Update dw_pcie_find_index() to remove assumption that ATU input address is non-zero (Frank Li) - Apply struct dw_pcie.parent_bus_offset in ATU users to remove use of .cpu_addr_fixup() when programming ATU (Frank Li) - Remove imx_pcie_cpu_addr_fixup() since dwc core can now derive the ATU input address (using parent_bus_offset) from devicetree (Frank Li) - Remove intel_pcie_cpu_addr() since dwc core can now derive the ATU input address (using parent_bus_offset) from devicetree (Frank Li) * pci/controller/dwc-cpu-addr-fixup: PCI: intel-gw: Remove intel_pcie_cpu_addr() PCI: imx6: Remove imx_pcie_cpu_addr_fixup() PCI: dwc: Use parent_bus_offset to remove need for .cpu_addr_fixup() PCI: dwc: ep: Ensure proper iteration over outbound map windows PCI: dwc: ep: Use devicetree 'reg[addr_space]' to derive CPU -> ATU addr offset PCI: dwc: ep: Consolidate devicetree handling in dw_pcie_ep_get_resources() PCI: dwc: ep: Call epc_create() early in dw_pcie_ep_init() PCI: dwc: Use devicetree 'reg[config]' to derive CPU -> ATU addr offset PCI: dwc: Add dw_pcie_parent_bus_offset() checking and debug PCI: dwc: Add dw_pcie_parent_bus_offset() PCI: dwc: Consolidate devicetree handling in dw_pcie_host_get_resources() PCI: dwc: Call devm_pci_alloc_host_bridge() early in dw_pcie_host_init() PCI: dwc: Rename cpu_addr to parent_bus_addr for ATU configuration PCI: dwc: Use resource start as ioremap() input in dw_pcie_pme_turn_off() # Conflicts: # drivers/pci/controller/dwc/pcie-designware.c # drivers/pci/controller/dwc/pcie-designware.h
2025-03-24PCI: imx6: Remove imx_pcie_cpu_addr_fixup()Frank Li
Remove imx_pcie_cpu_addr_fixup, the .cpu_addr_fixup() method, because the dwc core driver already handles address translation based on the devicetree description. Link: https://lore.kernel.org/r/20250315201548.858189-14-helgaas@kernel.org Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
2025-03-15PCI: imx6: Use devm_clk_bulk_get_all() to fetch clocksRichard Zhu
Use devm_clk_bulk_get_all() helper to simplify clock handle code. No functional changes intended. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> [kwilczynski: commit log, refactor to use dev_err_probe()] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20250226025628.1681206-1-hongxing.zhu@nxp.com
2025-03-15PCI: imx6: Identify controller via 'linux,pci-domain', not addressRichard Zhu
Instead of testing the controller register address to distinguish controller 1 from controller 0 on i.MX8MQ platforms, use the PCI domain number, which comes from the devicetree 'linux,pci-domain' property. All relevant devicetrees should already supply 'linux,pci-domain', which was added by c0b70f05c87f ("arm64: dts: imx8mq: use_dt_domains for pci node"). Instead of being set directly in imx_pcie_probe(), pci->dbi_base will be set by the DWC core in dw_pcie_get_resources(). No functional changes intended. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20250226024256.1678103-3-hongxing.zhu@nxp.com
2025-01-23Merge branch 'pci/controller/imx6'Bjorn Helgaas
- Add DT compatible string 'fsl,imx8q-pcie-ep' and driver support for i.MX8Q series (i.MX8QM, i.MX8QXP, and i.MX8DXL) Endpoints (Frank Li) - Add DT binding for optional i.MX95 Refclk and driver support to enable it if the platform hasn't enabled it (Richard Zhu) - Configure PHY based on controller being in Root Complex or Endpoint mode (Frank Li) - Rely on dbi2 and iATU base addresses from DT via dw_pcie_get_resources() instead of hardcoding them in imx6 (Richard Zhu) - Skip controller_id computation for i.MX7D since it only has one controller (Richard Zhu) - Deassert apps_reset in imx_pcie_deassert_core_reset() since it is asserted in imx_pcie_assert_core_reset() (Richard Zhu) - Add missing reference clock enable or disable logic for IMX6SX, IMX7D, IMX8MM (Richard Zhu) - Remove redundant imx7d_pcie_init_phy() since imx7d_pcie_enable_ref_clk() does the same thing (Richard Zhu) * pci/controller/imx6: PCI: imx6: Clean up comments and whitespace PCI: imx6: Remove surplus imx7d_pcie_init_phy() function PCI: imx6: Add missing reference clock disable logic PCI: imx6: Deassert apps_reset in imx_pcie_deassert_core_reset() PCI: imx6: Skip controller_id generation logic for i.MX7D PCI: imx6: Fetch dbi2 and iATU base addesses from DT PCI: imx6: Configure PHY based on Root Complex or Endpoint mode PCI: imx6: Add Refclk for i.MX95 PCIe dt-bindings: PCI: fsl,imx6q-pcie: Add Refclk for i.MX95 RC PCI: imx6: Add i.MX8Q PCIe Endpoint (EP) support dt-bindings: PCI: fsl,imx6q-pcie-ep: Add compatible string fsl,imx8q-pcie-ep # Conflicts: # drivers/pci/controller/dwc/pci-imx6.c
2025-01-23Merge branch 'pci/controller/dwc'Bjorn Helgaas
- Fix potential string truncation in dw_pcie_edma_irq_verify() (Niklas Cassel) - Don't wait for link up in DWC core if driver can detect Link Up event (Krishna chaitanya chundru) - If qcom 'global' IRQ is supported for detection of Link Up events, tell DWC core not to wait for link up (Krishna chaitanya chundru) - Update ICC and OPP votes after Link Up events (Krishna chaitanya chundru) - Use dw-rockchip dll_link_up IRQ to detect Link Up and enumerate devices so users don't have to manually rescan (Niklas Cassel) - In dw-rockchip, the 'sys' interrupt is required and detects Link Up events, so tell DWC core not to wait for link up (Niklas Cassel) - Always stop link in dw_pcie_suspend_noirq(), which is required at least for i.MX8QM to re-establish link on resume (Richard Zhu) - Drop racy and unnecessary LTSSM state check before sending PME_TURN_OFF message in dw_pcie_suspend_noirq() (Richard Zhu) - Add stubs for dw_pcie_suspend_noirq() dw_pcie_resume_noirq() when CONFIG_PCIE_DW_HOST is not defined so drivers don't need #ifdefs (Bjorn Helgaas) - Use DWC core suspend/resume functions for imx6 (Frank Li) - Add imx6 suspend/resume support for i.MX8MQ, i.MX8Q, and i.MX95 (Richard Zhu) - Add struct of_pci_range.parent_bus_addr for devices that need their immediate parent bus address, not the CPU address, e.g., to program an internal Address Translation Unit (iATU) (Frank Li) * pci/controller/dwc: PCI: dwc: Simplify config resource lookup of: address: Add parent_bus_addr to struct of_pci_range PCI: imx6: Add i.MX8MQ, i.MX8Q and i.MX95 PM support PCI: imx6: Use DWC common suspend resume method PCI: dwc: Add dw_pcie_suspend_noirq(), dw_pcie_resume_noirq() stubs for !CONFIG_PCIE_DW_HOST PCI: dwc: Remove LTSSM state test in dw_pcie_suspend_noirq() PCI: dwc: Always stop link in the dw_pcie_suspend_noirq PCI: dw-rockchip: Don't wait for link since we can detect Link Up PCI: dw-rockchip: Enumerate endpoints based on dll_link_up IRQ PCI: qcom: Update ICC and OPP values after Link Up event PCI: qcom: Don't wait for link if we can detect Link Up PCI: dwc: Don't wait for link up if driver can detect Link Up event PCI: dwc: Fix potential truncation in dw_pcie_edma_irq_verify() # Conflicts: # drivers/pci/controller/dwc/pci-imx6.c
2025-01-20PCI: imx6: Clean up comments and whitespaceBjorn Helgaas
For readability, fix typos and comments that needlessly exceed 80 columns. Link: https://lore.kernel.org/r/20250118210727.795559-1-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Frank Li <Frank.Li@nxp.com>
2025-01-18PCI: imx6: Add i.MX8MQ, i.MX8Q and i.MX95 PM supportRichard Zhu
Add i.MX8MQ, i.MX8Q and i.MX95 PCIe suspend/resume support. Link: https://lore.kernel.org/r/20241126075702.4099164-10-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Frank Li <Frank.Li@nxp.com>
2025-01-18PCI: imx6: Use DWC common suspend resume methodFrank Li
Call common DWC suspend/resume function. Use DWC common iATU method to send out PME_TURN_OFF message. In old DWC implementations, PCIE_ATU_INHIBIT_PAYLOAD in iATU Ctrl2 register is reserved, so the generic DWC implementation of sending the PME_Turn_Off message using a dummy MMIO write cannot be used. Use the previous method to kick off PME_TURN_OFF message for these platforms. The System Reset Control (SRC) interface is used to toggle 'turnoff_reset' to send PME_TURN_OFF and since the DWC implementation is used, it is not needed now. Replace the imx_pcie_stop_link() and imx_pcie_host_exit() by dw_pcie_suspend_noirq() in imx_pcie_suspend_noirq(). Since dw_pcie_suspend_noirq() already does these, see below call stack: dw_pcie_suspend_noirq() dw_pcie_stop_link() imx_pcie_stop_link() pci->pp.ops->deinit() imx_pcie_host_exit() Replace the imx_pcie_host_init(), dw_pcie_setup_rc() and imx_pcie_start_link() by dw_pcie_resume_noirq() in imx_pcie_resume_noirq(). Since dw_pcie_resume_noirq() already does these, see below call stack: dw_pcie_resume_noirq() pci->pp.ops->init() imx_pcie_host_init() dw_pcie_setup_rc() dw_pcie_start_link() imx_pcie_start_link(; Link: https://lore.kernel.org/r/20241126075702.4099164-9-hongxing.zhu@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2025-01-16PCI: imx6: Remove surplus imx7d_pcie_init_phy() functionRichard Zhu
This function essentially duplicates imx7d_pcie_enable_ref_clk(). So remove it. Link: https://lore.kernel.org/r/20241126075702.4099164-8-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Frank Li <Frank.Li@nxp.com>
2025-01-16PCI: imx6: Add missing reference clock disable logicRichard Zhu
Ensure the *_enable_ref_clk() function is symmetric by addressing missing disable parts on some platforms. Fixes: d0a75c791f98 ("PCI: imx6: Factor out ref clock disable to match enable") Link: https://lore.kernel.org/r/20241126075702.4099164-7-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Frank Li <Frank.Li@nxp.com>
2025-01-16PCI: imx6: Deassert apps_reset in imx_pcie_deassert_core_reset()Richard Zhu
Since the apps_reset is asserted in imx_pcie_assert_core_reset(), it should be deasserted in imx_pcie_deassert_core_reset(). Fixes: 9b3fe6796d7c ("PCI: imx6: Add code to support i.MX7D") Link: https://lore.kernel.org/r/20241126075702.4099164-6-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Frank Li <Frank.Li@nxp.com>
2025-01-16PCI: imx6: Skip controller_id generation logic for i.MX7DRichard Zhu
The i.MX7D only has one PCIe controller, so controller_id should always be 0. The previous code is incorrect although yielding the correct result. Fix by removing "IMX7D" from the switch case branch. Fixes: 2d8ed461dbc9 ("PCI: imx6: Add support for i.MX8MQ") Link: https://lore.kernel.org/r/20241126075702.4099164-5-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Frank Li <Frank.Li@nxp.com>
2025-01-16PCI: imx6: Fetch dbi2 and iATU base addesses from DTRichard Zhu
Since dw_pcie_get_resources() gets the dbi2 and iATU base addresses from DT, remove the code from the imx6 driver that does the same. Upstream DTSes have not enabled Endpoint function. So nothing is broken for old upstream DTBs. Link: https://lore.kernel.org/r/20241126075702.4099164-4-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2025-01-16PCI: imx6: Configure PHY based on Root Complex or Endpoint modeFrank Li
Pass PHY_MODE_PCIE_EP if the PCI controller operates in Endpoint (EP) mode, and fix the Root Complex (RC) mode being hardcoded using a drvdata mode check. Fixes: 8026f2d8e8a9 ("PCI: imx6: Call common PHY API to set mode, speed, and submode") Link: https://lore.kernel.org/r/20241119-pci_fixup_addr-v8-6-c4bfa5193288@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
2025-01-16PCI: imx6: Add Refclk for i.MX95 PCIeRichard Zhu
Add "ref" clock to enable Refclk. To avoid breaking DT backwards compatibility, the i.MX95 "ref" clock is optional. Use devm_clk_get_optional() to fetch i.MX95 PCIe optional clocks in driver. If using external clock, "ref" clock should point to external reference. If using internal clock, CREF_EN in LAST_TO_REG controls reference output, implemented in drivers/clk/imx/clk-imx95-blk-ctl.c. Link: https://lore.kernel.org/r/20241126075702.4099164-3-hongxing.zhu@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Frank Li <Frank.Li@nxp.com>
2025-01-16PCI: imx6: Add i.MX8Q PCIe Endpoint (EP) supportFrank Li
Add support for the i.MX8Q series (i.MX8QM, i.MX8QXP, and i.MX8DXL) PCIe Endpoint (EP). On the i.MX8Q platforms, the PCI bus addresses differ from the CPU addresses. However, the DesignWare (DWC) driver already handles this in the common code. Link: https://lore.kernel.org/r/20241119-pci_fixup_addr-v8-7-c4bfa5193288@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2025-01-15PCI: imx6: Add IOMMU and ITS MSI support for i.MX95Frank Li
For the i.MX95, the configuration of a LUT is necessary to convert PCIe Requester IDs (RIDs) to StreamIDs, which are used by both IOMMU and ITS. This involves checking msi-map and iommu-map device tree properties to ensure consistent mapping of Requester IDs to the same StreamIDs. Subsequently, LUT-related registers are configured. If a msi-map isn't detected, the platform relies on DWC built-in controller for MSIs that do not need StreamIDs. Implement PCI bus callback function to handle enable_device() and disable_device() operations, setting up the LUT whenever a new PCI device is enabled. Known limitations: - If iommu-map exists in the device tree but the IOMMU controller is disabled, StreamIDs are programmed into the LUT. However, if a RID is out of range of the iommu-map, enabling the PCI device would result in a failure, although the PCI device can work without the IOMMU. - If msi-map exists in the device tree but the MSI controller is disabled, MSIs will not work. The DWC driver skips initializing the built-in MSI controller, falling back to legacy PCI INTx only. Link: https://lore.kernel.org/r/20250114-imx95_lut-v9-2-39f58dbed03a@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> [bhelgaas: fix uninitialized "sid" in imx_pcie_enable_device()] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
2024-11-06PCI: imx6: Fix suspend/resume support on i.MX6QDLStefan Eichenberger
The suspend/resume functionality is currently broken on the i.MX6QDL platform, as documented in the NXP errata (ERR005723): https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf This patch addresses the issue by sharing most of the suspend/resume sequences used by other i.MX devices, while avoiding modifications to critical registers that disrupt the PCIe functionality. It targets the same problem as the following downstream commit: https://github.com/nxp-imx/linux-imx/commit/4e92355e1f79d225ea842511fcfd42b343b32995 Unlike the downstream commit, this patch also resets the connected PCIe device if possible. Without this reset, certain drivers, such as ath10k or iwlwifi, will crash on resume. The device reset is also done by the driver on other i.MX platforms, making this patch consistent with existing practices. Upon resuming, the kernel will hang and display an error. Here's an example of the error encountered with the ath10k driver: ath10k_pci 0000:01:00.0: Unable to change power state from D3hot to D0, device inaccessible Unhandled fault: imprecise external abort (0x1406) at 0x0106f944 Without this patch, suspend/resume will fail on i.MX6QDL devices if a PCIe device is connected. Link: https://lore.kernel.org/r/20241030103250.83640-1-eichest@gmail.com Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com> [kwilczynski: commit log, added tag for stable releases] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Richard Zhu <hongxing.zhu@nxp.com> Cc: stable@vger.kernel.org
2024-09-19Merge branch 'pci/controller/qcom'Bjorn Helgaas
- Drop endpoint redundant masking of global IRQ events (Manivannan Sadhasivam) - Clarify unknown global IRQ message and only log it once to avoid a flood (Manivannan Sadhasivam) - Add Manivannan Sadhasivam as maintainer of qcom endpoint driver (Manivannan Sadhasivam) - Add 'linux,pci-domain' property to endpoint DT binding (Manivannan Sadhasivam) - Assign PCI domain number for endpoint controllers (Manivannan Sadhasivam) - Add 'qcom_pcie_ep' and the PCI domain number to IRQ names for endpoint controller (Manivannan Sadhasivam) - Add global SPI interrupt for PCIe link events to DT binding (Manivannan Sadhasivam) - Add global RC interrupt handler to handle 'Link up' events and automatically enumerate hot-added devices (Manivannan Sadhasivam) - Avoid mirroring of DBI and iATU register space so it doesn't overlap BAR MMIO space (Prudhvi Yarlagadda) - Enable controller resources like PHY only after PERST# is deasserted to partially avoid the problem that the endpoint SoC crashes when accessing things when Refclk is absent (Manivannan Sadhasivam) - Rename dw_pcie.link_gen to max_link_speed to avoid ambiguity (Manivannan Sadhasivam) - Cache maximum link speed value in dw_pcie.max_link_speed for use by vendor drivers (Manivannan Sadhasivam) - Add 16.0 GT/s equalization and RX lane margining settings (Shashank Babu Chinta Venkata) - Pass domain number to pci_bus_release_domain_nr() explicitly to avoid a NULL pointer dereference (Manivannan Sadhasivam) * pci/controller/qcom: PCI: Pass domain number to pci_bus_release_domain_nr() explicitly PCI: qcom: Add RX lane margining settings for 16.0 GT/s PCI: qcom: Add equalization settings for 16.0 GT/s PCI: dwc: Always cache the maximum link speed value in dw_pcie::max_link_speed PCI: dwc: Rename 'dw_pcie::link_gen' to 'dw_pcie::max_link_speed' PCI: qcom-ep: Enable controller resources like PHY only after refclk is available PCI: qcom: Disable mirroring of DBI and iATU register space in BAR region PCI: qcom: Enumerate endpoints based on Link up event in 'global_irq' interrupt dt-bindings: PCI: qcom,pcie-sm8450: Add 'global' interrupt PCI: qcom-ep: Modify 'global_irq' and 'perst_irq' IRQ device names PCI: endpoint: Assign PCI domain number for endpoint controllers dt-bindings: PCI: pci-ep: Document 'linux,pci-domain' property dt-bindings: PCI: pci-ep: Update Maintainers PCI: qcom-ep: Reword the error message for receiving unknown global IRQ event PCI: qcom-ep: Drop the redundant masking of global IRQ events
2024-09-13PCI: dwc: Rename 'dw_pcie::link_gen' to 'dw_pcie::max_link_speed'Manivannan Sadhasivam
The 'link_gen' field is now holding the maximum supported link speed set either by the controller driver or by DT through 'max-link-speed' property. However, the name 'link_gen' sounds like the negotiated link speed of the PCIe link. So rename it to 'max_link_speed' to make it clear that it holds the maximum supported link speed of the controller. Link: https://lore.kernel.org/linux-pci/20240911-pci-qcom-gen4-stability-v7-1-743f5c1fd027@linaro.org Tested-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
2024-09-11PCI: imx6: Add i.MX8Q PCIe Root Complex (RC) supportRichard Zhu
Implement i.MX8Q (i.MX8QM, i.MX8QXP, and i.MX8DXL) PCIe Root Complex (RC) support. While the controller resembles that of i.MX8MP, the PHY differs significantly. Also, there's a distinction between PCI bus addresses and CPU addresses. Introduce IMX_PCIE_FLAG_CPU_ADDR_FIXUP in drvdata::flags to indicate driver need the cpu_addr_fixup() callback to facilitate CPU address to PCI bus address conversion according to "ranges" property. Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-11-b68ee5ef2b4d@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> [bhelgaas: check resource_list_first_type() for NULL] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-09-09PCI: imx6: Call common PHY API to set mode, speed, and submodeFrank Li
Invoke the common PHY API to configure mode, speed, and submode. While these functions are optional in the PHY interface, they are necessary for certain PHY drivers. Lack of support for these functions in a PHY driver does not cause harm. Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-10-b68ee5ef2b4d@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-09-09PCI: imx6: Consolidate redundant if-checksFrank Li
Consolidated redundant if-checks pertaining to imx_pcie->phy. Instead of two separate checks, merged them into one to improve code readability. Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-8-b68ee5ef2b4d@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-09-09PCI: imx6: Improve comment for workaround ERR010728Frank Li
Improve comment about workaround ERR010728 by using official errata document content, see: https://www.nxp.com/webapp/Download?colCode=IMX7DS_2N09P Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-7-b68ee5ef2b4d@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-09-09PCI: imx6: Simplify switch-case logic by involve core_reset callbackFrank Li
Instead of using the switch case statement to assert/dassert the core reset handled by this driver itself, let's introduce a new callback core_reset() and define it for platforms that require it. This simplifies the code. Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-5-b68ee5ef2b4d@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-09-09PCI: imx6: Introduce SoC specific callbacks for controlling REFCLKFrank Li
Instead of using the switch case statement to enable/disable the reference clock handled by this driver itself, let's introduce a new callback enable_ref_clk() and define it for platforms that require it. This simplifies the code. Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-5-b68ee5ef2b4d@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-09-09PCI: imx6: Rename imx6_* with imx_*Frank Li
Since this driver has evolved to support other i.MX SoCs such as i.MX7/8/9, thus rename the 'imx6' prefix to 'imx' to avoid confusion. The driver name is left unchanged to avoid breaking userspace. Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-3-b68ee5ef2b4d@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> [kwilczynski: commit log, refactor the IMX_* macros] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-09-09PCI: imx6: Fix missing call to phy_power_off() in error handlingFrank Li
Fix missing call to phy_power_off() in the error path of imx6_pcie_host_init(). Remove unnecessary check for imx6_pcie->phy as the PHY API already handles NULL pointers. Fixes: cbcf8722b523 ("phy: freescale: imx8m-pcie: Fix the wrong order of phy_init() and phy_power_on()") Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-3-b68ee5ef2b4d@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: <stable@vger.kernel.org> # 6.1+
2024-09-09PCI: imx6: Fix i.MX8MP PCIe EP's occasional failure to trigger MSIRichard Zhu
Correct occasional MSI triggering failures in i.MX8MP PCIe EP by applying the correct hardware outbound alignment requirement. The i.MX platform has a restriction about outbound address translation. The pci-epc-mem uses page_size to manage it. Set the correct page_size for i.MX platform to meet the hardware requirement, which is the same as inbound address alignment. Thus, align it with epc_features::align. Fixes: 1bd0d43dcf3b ("PCI: imx6: Clean up addr_space retrieval code") Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-2-b68ee5ef2b4d@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Jason Liu <jason.hui.liu@nxp.com> Cc: <stable@vger.kernel.org> # 6.9+
2024-09-09PCI: imx6: Fix establish link failure in EP mode for i.MX8MM and i.MX8MPRichard Zhu
Add IMX6_PCIE_FLAG_HAS_APP_RESET flag to IMX8MM_EP and IMX8MP_EP drvdata. This flag was overlooked during code restructuring. It is crucial to release the app-reset from the System Reset Controller before initiating LTSSM to rectify the issue. Fixes: 0c9651c21f2a ("PCI: imx6: Simplify reset handling by using *_FLAG_HAS_*_RESET") Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-1-b68ee5ef2b4d@nxp.com Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: <stable@vger.kernel.org> # 6.9+
2024-07-19Merge branch 'pci/controller/dwc'Bjorn Helgaas
- Use msleep() in DWC core instead of usleep_range() for ~100 ms sleep (Konrad Dybcio) - Fix iATU slot management to avoid using the wrong slot after PERST# assert/deassert, which could potentially cause DMA to go the wrong place (Frank Li) - Consolidate dw_pcie_prog_outbound_atu() arguments into a struct to ease adding new functionality like initiating Message TLPs (Yoshihiro Shimoda) - Add support for endpoints to initiate PCIe messages (Yoshihiro Shimoda) - Add #defines for PCIe INTx messages (Yoshihiro Shimoda) - Add support for endpoints to initiate PCIe PME_Turn_Off messages for system suspend (Frank Li) - Add dw_pcie_ep_linkdown() to reinitialize registers that are lost when the link goes down (Manivannan Sadhasivam) - Use dw_pcie_ep_linkdown() to reinitialize qcom non-sticky registers that are lost when the link goes down (Manivannan Sadhasivam) - Enforce DWC limitation that 64-bit BARs must start with the even numbered BAR (Niklas Cassel) * pci/controller/dwc: PCI: dwc: ep: Enforce DWC specific 64-bit BAR limitation PCI: layerscape-ep: Use the generic dw_pcie_ep_linkdown() API to handle Link Down event PCI: qcom-ep: Use the generic dw_pcie_ep_linkdown() API to handle Link Down event PCI: dwc: ep: Remove dw_pcie_ep_init_notify() wrapper PCI: dwc: ep: Add a generic dw_pcie_ep_linkdown() API to handle Link Down event PCI: dwc: Add generic MSG TLP support for sending PME_Turn_Off when system suspend PCI: Add PCIE_MSG_CODE_PME_TURN_OFF message macro PCI: Add PCIE_MSG_CODE_ASSERT_INTx message macros PCI: dwc: Add outbound MSG TLPs support PCI: dwc: Consolidate args of dw_pcie_prog_outbound_atu() into a structure PCI: dwc: Fix index 0 incorrectly being interpreted as a free ATU slot PCI: dwc: Use msleep() in dw_pcie_wait_for_link()
2024-07-09PCI: dwc: ep: Remove dw_pcie_ep_init_notify() wrapperManivannan Sadhasivam
Currently dw_pcie_ep_init_notify() wrapper just calls pci_epc_init_notify() directly, so this wrapper provides no benefit to the glue drivers. Remove it and call pci_epc_init_notify() directly from glue drivers. Suggested-by: Bjorn Helgaas <helgaas@kernel.org> Link: https://lore.kernel.org/linux-pci/20240606-pci-deinit-v1-1-4395534520dc@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Niklas Cassel <cassel@kernel.org>
2024-05-28PCI: imx6: Convert to use agnostic GPIO APIAndy Shevchenko
The of_gpio.h legacy API is going to be removed. In preparation for that, convert the driver to the agnostic API. [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20240506142142.4042810-5-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-04-10PCI: endpoint: Remove "core_init_notifier" flagManivannan Sadhasivam
"core_init_notifier" flag is set by the glue drivers requiring refclk from the host to complete the DWC core initialization. Also, those drivers will send a notification to the EPF drivers once the initialization is fully completed using the pci_epc_init_notify() API. Only then, the EPF drivers will start functioning. For the rest of the drivers generating refclk locally, EPF drivers will start functioning post binding with them. EPF drivers rely on the 'core_init_notifier' flag to differentiate between the drivers. Unfortunately, this creates two different flows for the EPF drivers. So to avoid that, let's get rid of the "core_init_notifier" flag and follow a single initialization flow for the EPF drivers. This is done by calling the dw_pcie_ep_init_notify() from all glue drivers after the completion of dw_pcie_ep_init_registers() API. This will allow all the glue drivers to send the notification to the EPF drivers once the initialization is fully completed. Only difference here is that, the drivers requiring refclk from host will send the notification once refclk is received, while others will send it during probe time itself. But this also requires the EPC core driver to deliver the notification after EPF driver bind. Because, the glue driver can send the notification before the EPF drivers bind() and in those cases the EPF drivers will miss the event. To accommodate this, EPC core is now caching the state of the EPC initialization in 'init_complete' flag and pci-ep-cfs driver sends the notification to EPF drivers based on that after each EPF driver bind. Link: https://lore.kernel.org/linux-pci/20240327-pci-dbi-rework-v12-8-082625472414@linaro.org Tested-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Niklas Cassel <cassel@kernel.org>
2024-04-10PCI: dwc: ep: Call dw_pcie_ep_init_registers() API directly from all glue ↵Manivannan Sadhasivam
drivers Currently, dw_pcie_ep_init_registers() API is directly called by the glue drivers requiring active refclk from host. But for the other drivers, it is getting called implicitly by dw_pcie_ep_init(). This is due to the fact that this API initializes DWC EP specific registers and that requires an active refclk (either from host or generated locally by endpoint itsef). But, this causes a discrepancy among the glue drivers. So to avoid this confusion, let's call this API directly from all glue drivers irrespective of refclk dependency. Only difference here is that the drivers requiring refclk from host will call this API only after the refclk is received and other drivers without refclk dependency will call this API right after dw_pcie_ep_init(). With this change, the check for 'core_init_notifier' flag can now be dropped from dw_pcie_ep_init() API. This will also allow us to remove the 'core_init_notifier' flag completely in the later commits. Link: https://lore.kernel.org/linux-pci/20240327-pci-dbi-rework-v12-7-082625472414@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Niklas Cassel <cassel@kernel.org> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
2024-03-04PCI: imx6: Add iMX95 Endpoint (EP) supportFrank Li
Add iMX95 EP support and add 64bit address support. The internal bus bridge for PCI support 64bit DMA address in iMX95 hence call dma_set_mask_and_coherent() to set 64 bit DMA mask. Link: https://lore.kernel.org/r/20240220161924.3871774-15-Frank.Li@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-03-04PCI: imx6: Add epc_features in imx6_pcie_drvdataFrank Li
The i.MX EP exhibits variations in epc_features among different EP configurations. This introduces the addition of epc_features in imx6_pcie_drvdata to accommodate these differences. It's important to note that there are no functional changes in this commit; instead, it lays the groundwork for supporting i.MX95 EP functions. Link: https://lore.kernel.org/r/20240220161924.3871774-13-Frank.Li@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-03-04PCI: imx6: Clean up addr_space retrieval codeFrank Li
Since the dw_pcie_ep_init() function is already fetching the 'addr_space' region, no need to do the same in this driver. Link: https://lore.kernel.org/r/20240220161924.3871774-12-Frank.Li@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-03-04PCI: imx6: Add iMX95 PCIe Root Complex supportFrank Li
Add iMX95 PCIe Root Complex support. Link: https://lore.kernel.org/r/20240220161924.3871774-11-Frank.Li@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-03-04PCI: imx6: Simplify switch-case logic by introducing init_phy() callbackFrank Li
Instead of using the switch case statement to initialize the PHY handled by this driver itself, let's introduce a new callback init_phy() and define it for platforms that require it. Link: https://lore.kernel.org/r/20240220161924.3871774-7-Frank.Li@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-03-04PCI: imx6: Simplify configure_type() by using mode_off and mode_maskFrank Li
Add drvdata::mode_off and drvdata::mode_mask to simplify imx6_pcie_configure_type() logic. Link: https://lore.kernel.org/r/20240220161924.3871774-6-Frank.Li@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-03-04PCI: imx6: Simplify ltssm_enable() by using ltssm_off and ltssm_maskFrank Li
Add drvdata::ltssm_off and drvdata::ltssm_mask to simplify imx6_pcie_ltssm_enable(disable)() logic. Link: https://lore.kernel.org/r/20240220161924.3871774-5-Frank.Li@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
generated by cgit (git 2.34.1) at 2025-07-15 12:21:36 +0000