summaryrefslogtreecommitdiff
path: root/drivers/phy/microchip
AgeCommit message (Collapse)Author
2025-02-14phy: PHY_LAN966X_SERDES should depend on SOC_LAN966 || MCHP_LAN966X_PCIGeert Uytterhoeven
The Microchip LAN966X SerDes PHY is only present on Microchip LAN966x SoCs. However, when used as a PCI endpoint, all peripherals of the LAN966x SoC can be accessed by the PCI host. Hence add dependencies on SOC_LAN966 and MCHP_LAN966X_PCI, to prevent asking the user about this driver when configuring a kernel without Microchip LAN966x SoC and PCIe support. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Herve Codina <herve.codina@bootlin.com> Link: https://lore.kernel.org/r/369233dfded88ff6fb342e03794fe31985d84d82.1737383314.git.geert+renesas@glider.be Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-10-22phy: lan969x-serdes: add support for lan969x serdes driverDaniel Machon
Add support for lan969x SERDES driver. Lan969x has ten 10G SERDES'es which share the same features and data rates as the Sparx5 SERDES'es. Signed-off-by: Daniel Machon <daniel.machon@microchip.com> Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com> Link: https://lore.kernel.org/r/20240909-sparx5-lan969x-serdes-driver-v2-9-d695bcb57b84@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-10-22phy: sparx5-serdes: add support for branching on chip typeDaniel Machon
In preparation for lan969x, add a way to branch out on code that is to be executed on either Sparx5 or lan969x. Initially, this is required to branch out when checking the SERDES types and SERDES speeds, since the handling of these differ on the two platforms. This will also be used by the lan969x driver introduced in a subsequent patch. Signed-off-by: Daniel Machon <daniel.machon@microchip.com> Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com> Link: https://lore.kernel.org/r/20240909-sparx5-lan969x-serdes-driver-v2-7-d695bcb57b84@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-10-22phy: sparx5-serdes: add indirection layer to register macrosDaniel Machon
The register macros are used to read and write to the SERDES registers. The registers are largely the same on Sparx5 and lan969x, however some register target sizes differ. Therefore we introduce a new indirection to the register macros. The target sizes are looked up, using a mapping table (sparx5_serdes_tsize) that maps the register target to the register target size. With this addition, we can reuse all the existing macros for lan969x. Also the autogenerated macros are now formatted slightly different, to adhere to a 80 character limit. Signed-off-by: Daniel Machon <daniel.machon@microchip.com> Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com> Link: https://lore.kernel.org/r/20240909-sparx5-lan969x-serdes-driver-v2-6-d695bcb57b84@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-10-22phy: sparx5-serdes: add function for getting the CMU indexDaniel Machon
The SERDES to CMU mapping is different on Sparx5 and lan969x. Therefore create a function for getting the CMU index on Sparx5. Signed-off-by: Daniel Machon <daniel.machon@microchip.com> Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com> Link: https://lore.kernel.org/r/20240909-sparx5-lan969x-serdes-driver-v2-5-d695bcb57b84@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-10-22phy: sparx5-serdes: add ops to match dataDaniel Machon
We need to handle code differently in a few places. Add a struct: sparx5_serdes_ops for this purpose, and populate it a with function to set the SERDES type. Signed-off-by: Daniel Machon <daniel.machon@microchip.com> Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com> Link: https://lore.kernel.org/r/20240909-sparx5-lan969x-serdes-driver-v2-4-d695bcb57b84@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-10-22phy: sparx5-serdes: add constant for the number of CMU'sDaniel Machon
The number of CMU's differ for Sparx5 and lan969x, so add a new field: cmu_max and use it throughout. Signed-off-by: Daniel Machon <daniel.machon@microchip.com> Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com> Link: https://lore.kernel.org/r/20240909-sparx5-lan969x-serdes-driver-v2-3-d695bcb57b84@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-10-22phy: sparx5-serdes: add constants to match dataDaniel Machon
We need to handle a few different constants that differ for Sparx5 and lan969x. Add a new struct: sparx5_serdes_consts for this purpose. We populate it with an initial field for the number of SERDES'es: sd_max. Signed-off-by: Daniel Machon <daniel.machon@microchip.com> Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com> Link: https://lore.kernel.org/r/20240909-sparx5-lan969x-serdes-driver-v2-2-d695bcb57b84@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-10-22phy: sparx5-serdes: add support for private match dataDaniel Machon
In order to reuse the existing Sparx5 SERDES driver for lan969x, we add support for private match data, with initial fields for the iomap and imap_size. Signed-off-by: Daniel Machon <daniel.machon@microchip.com> Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com> Link: https://lore.kernel.org/r/20240909-sparx5-lan969x-serdes-driver-v2-1-d695bcb57b84@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-03-16Merge tag 'phy-for-6.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull phy updates from Vinod Koul: "New hardware support: - Qualcomm X1E80100 PCIe phy support, SM8550 PCIe1 PHY, SC7180 UFS PHY and SDM630 USBC support - Rockchip HDMI/eDP Combo PHY driver - Mediatek MT8365 CSI phy driver Updates: - Rework on Qualcomm phy PCS registers and type-c handling - Cadence torrent phy updates for multilink configuration - TI gmii resume support" * tag 'phy-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (41 commits) phy: constify of_phandle_args in xlate phy: ti: tusb1210: Define device IDs phy: ti: tusb1210: Use temporary variable for struct device phy: rockchip: Add Samsung HDMI/eDP Combo PHY driver dt-bindings: phy: Add Rockchip HDMI/eDP Combo PHY schema phy: ti: gmii-sel: add resume support phy: mtk-mipi-csi: add driver for CSI phy dt-bindings: phy: add mediatek MIPI CD-PHY module v0.5 phy: cadence-torrent: Add USXGMII(156.25MHz) + SGMII/QSGMII(100MHz) multilink config for TI J7200 dt-bindings: phy: cadence-torrent: Add a separate compatible for TI J7200 phy: cadence-torrent: Add USXGMII(156.25MHz) + SGMII/QSGMII(100MHz) multilink configuration phy: cadence-torrent: Add PCIe(100MHz) + USXGMII(156.25MHz) multilink configuration dt-bindings: phy: cadence-torrent: Add optional input reference clock for PLL1 phy: qcom-qmp-ufs: Switch to devm_clk_bulk_get_all() API dt-bindings: phy: qmp-ufs: Fix PHY clocks phy: qcom: sgmii-eth: move PCS registers to separate header phy: qcom: sgmii-eth: use existing register definitions phy: qcom: qmp-usbc: drop has_pwrdn_delay handling phy: qcom: qmp: move common bits definitions to common header phy: qcom: qmp: split DP PHY registers to separate headers ...
2024-02-23phy: constify of_phandle_args in xlateKrzysztof Kozlowski
The xlate callbacks are supposed to translate of_phandle_args to proper provider without modifying the of_phandle_args. Make the argument pointer to const for code safety and readability. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> #Broadcom Link: https://lore.kernel.org/r/20240217093937.58234-1-krzysztof.kozlowski@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-01-24phy: lan966x: Add missing serdes mux entryHoratiu Vultur
According to the datasheet(Table 3-2: Port configuration) the serdes 2 (SD2) can be configured to run QSGMII or SGMII mode. Already the QSGMII mode is supported in the serdes_muxes list but was missing the SGMII mode. In this mode the serdes is connected to the port 4. Therefore add this entry in the list. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20240108205140.1701770-1-horatiu.vultur@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-05-08phy: sparx5-serdes: add skip_cmu_cfg check when configuring lanesDaniel Machon
Add a check for skip_cmu_cfg when configuring the serdes lane. All individual serdeses are reset upon first configuration. Resetting the serdes involves reconfiguring it with preset values. The serdesmode is required to determine the clock-providing CMU, therefore make sure the serdes is not reconfigured if the serdesmode is not set. Signed-off-by: Daniel Machon <daniel.machon@microchip.com> Link: https://lore.kernel.org/r/20230417180335.2787494-8-daniel.machon@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-05-08phy: sparx5-serdes: remove power up of all CMUsDaniel Machon
CMUs should not be powered up by default anymore, so remove responsible code. Signed-off-by: Daniel Machon <daniel.machon@microchip.com> Link: https://lore.kernel.org/r/20230417180335.2787494-7-daniel.machon@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-05-08phy: sparx5-serdes: power on CMUs individuallyDaniel Machon
Power on the CMU instance, that provides the clock for the serdes, given the specified serdes mode and index. The CMU instance is looked up, using a preset map of serdes mode and index to CMU index. Signed-off-by: Daniel Machon <daniel.machon@microchip.com> Link: https://lore.kernel.org/r/20230417180335.2787494-6-daniel.machon@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-05-08phy: sparx5-serdes: power down all CMUs by defaultDaniel Machon
All CMUs are powered up initially. This uses needless power. This patch makes sure all CMUs are powered down by default. This involves configuring a number reference clock and power-down registers of the CMU. Individual CMUs are later powered up, when the serdes lanes are configured. Signed-off-by: Daniel Machon <daniel.machon@microchip.com> Link: https://lore.kernel.org/r/20230417180335.2787494-5-daniel.machon@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-05-08phy: sparx5-serdes: reorder CMU functionsDaniel Machon
Reorder CMU functions, as some of them are now required by the serdes functions. No functional changes. Signed-off-by: Daniel Machon <daniel.machon@microchip.com> Link: https://lore.kernel.org/r/20230417180335.2787494-4-daniel.machon@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-05-08phy: sparx5-serdes: configure optimal quiet mode for serdes lanesDaniel Machon
All the serdes lanes of the sparx5 will transition between normal mode and quiet mode, depending on activity. Make sure that the quiet mode is configured optimally for all lanes initially. Although not much, this will save a small amount of power. Signed-off-by: Daniel Machon <daniel.machon@microchip.com> Link: https://lore.kernel.org/r/20230417180335.2787494-3-daniel.machon@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-05-08phy: sparx5-serdes: add registers required for SD/CMU power downDaniel Machon
Add registers required to configure serdeses and CMUs for initial power down. Signed-off-by: Daniel Machon <daniel.machon@microchip.com> Link: https://lore.kernel.org/r/20230417180335.2787494-2-daniel.machon@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-10-07Merge tag 'phy-for-6.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull phy updates from Vinod Koul: "This contains bunch of new device support and one new Sunplus driver along with updates which include another big round of qmp phy conversion. New support: - Qualcomm SC8280XP eDP & DP and USB3 UNI phy (Bjorn Andersson) - Rockchip rk3568 inno dsidphy (Chris Morgan) - ocelot-serdes phy yaml binding (Colin Foster) - Renesas gen2-usb phy yaml binding (Geert Uytterhoeven) - RGMII suport in lan966x driver (Horatiu Vultur) - Qualcomm SM6375 usb snps-femto-v2 bindings (Konrad Dybcio) - Rockchip rk356x csi-dphya (Michael Riesch) - Qualcomm sdm670 usb2 bindings (Richard Acayan) - Sunplus USB2 PHY (Vincent Shih) Updates: - Mediatek hdmi, ufs, tphy and xsphy updates to use bitfield helpers (Chunfeng Yun) - Continued Qualcomm qmp phy driver split and cleanup. More patches are under review and expected that next cycle might see completion of this activity (Dmitry Baryshkov & Johan Hovold) - TI wiz driver support for j7200 10g (Roger Quadros) - Qualcomm femto phy driver support for override params to help with tuning (Sandeep Maheswaram) - SGMII support in TI wiz driver (Siddharth Vadapalli) - dev_err_probe simplification (Yuan Can)" * tag 'phy-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (170 commits) phy: phy-mtk-dp: make array driving_params static const dt-bindings: phy: qcom,qusb2: document sdm670 compatible phy: qcom-qmp-pcie: fix resource mapping for SDM845 QHP PHY phy: rockchip-snps-pcie3: only look for rockchip,pipe-grf on rk3588 phy: tegra: xusb: Enable usb role switch attribute phy: mediatek: fix build warning of FIELD_PREP() phy: qcom-qmp-usb: Use dev_err_probe() to simplify code phy: qcom-qmp-ufs: Use dev_err_probe() to simplify code phy: qcom-qmp-pcie-msm8996: Use dev_err_probe() to simplify code phy: qcom-qmp-combo: Use dev_err_probe() to simplify code phy: qualcomm: call clk_disable_unprepare in the error handling phy: intel: Use dev_err_probe() to simplify code phy: tegra: xusb: Use dev_err_probe() to simplify code phy: qcom-snps: Use dev_err_probe() to simplify code phy: qcom-qusb2: Use dev_err_probe() to simplify code phy: qcom-qmp-pcie: Use dev_err_probe() to simplify code phy: ti: phy-j721e-wiz: fix reference leaks in wiz_probe() phy: mediatek: mipi: remove register access helpers phy: mediatek: mipi: mt8183: use common helper to access registers phy: mediatek: mipi: mt8183: use GENMASK to generate bits mask ...
2022-09-13phy: Add RGMII support on lan966xHoratiu Vultur
The serdes driver contains also a mux to decide which interface type to use. Currently the driver supports GMII/SGMII/QSGMII and partially RGMII. As it doesn't support all the other RGMII interfaces like RGMII_TXID/RXID/ID and it could run only at 1G. Therefore extend this for all the other speeds(10/100) and also allow the other interfaces. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20220901121455.245103-1-horatiu.vultur@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-08-31phy: lan966x: add support for QUSGMIIMaxime Chevallier
Makes so that the serdes driver also takes QUSGMII in consideration. It's configured exactly as QSGMII as far as the serdes driver is concerned. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-14phy: lan966x: Remove set_speed functionHoratiu Vultur
Remove the set_speed function and allow the driver to figure out the speed at which needs to configure the serdes based on the interface type. Fixes: 305524902a0045 ("phy: Add lan966x ethernet serdes PHY driver") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20211211214717.1284306-1-horatiu.vultur@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-02phy: lan966x: Extend lan966x to support multiple phy interfaces.Horatiu Vultur
Currently the driver is supporting only the interfaces QSGMII, SGMII, RGMII and GMII. This patch extend the supported interfaces with 1000BASE-X and 2500BASE-X. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20211130101015.164916-1-horatiu.vultur@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-11-23phy: Add lan966x ethernet serdes PHY driverHoratiu Vultur
Add the Microchip lan966x ethernet serdes PHY driver for interfaces available in the lan966x SoC. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20211116100818.1615762-4-horatiu.vultur@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-26phy: Sparx5 Eth SerDes: Fix return value check in sparx5_serdes_probe()Yang Yingliang
In case of error, the function devm_ioremap() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: 2ff8a1eeb5aa ("phy: Add Sparx5 ethernet serdes PHY driver") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20210909072149.2934047-1-yangyingliang@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-03phy: Sparx5 Eth SerDes: check return value after calling platform_get_resource()Yang Yingliang
It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20210603051014.2674744-1-yangyingliang@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-06phy: fix resource_size.cocci warningskernel test robot
drivers/phy/microchip/sparx5_serdes.c:2440:54-57: ERROR: Missing resource_size with iores Use resource_size function on resource object instead of explicit computation. Generated by: scripts/coccinelle/api/resource_size.cocci Fixes: 2ff8a1eeb5aa ("phy: Add Sparx5 ethernet serdes PHY driver") CC: Steen Hegelund <steen.hegelund@microchip.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20210318232844.GA65886@63b0c5462fda Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-06phy: Sparx5 Eth SerDes: Use direct register operationsSteen Hegelund
Use direct register operations instead of a table of register information to lower the stack usage. Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20210329141309.612459-2-steen.hegelund@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-31phy: microchip: PHY_SPARX5_SERDES should depend on ARCH_SPARX5Geert Uytterhoeven
The Microchip Sparx5 SerDes PHY is present only Microchip Sparx5 SoCs. Hence add a dependency on ARCH_SPARX5, to prevent asking the user about this driver when configuring a kernel without support for Sparx5 SoCs. Fixes: 2ff8a1eeb5aa8bb4 ("phy: Add Sparx5 ethernet serdes PHY driver") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20210331081937.367408-1-geert+renesas@glider.be Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-17phy: Add Sparx5 ethernet serdes PHY driverSteen Hegelund
Add the Microchip Sparx5 ethernet serdes PHY driver for the 6G, 10G and 25G interfaces available in the Sparx5 SoC. Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com> Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210218161451.3489955-4-steen.hegelund@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
generated by cgit (git 2.34.1) at 2025-07-15 09:12:01 +0000