| Age | Commit message (Collapse) | Author |
|---|
|
The choices bitmap belongs only to this thread, therefore we can use the
non-atomic version of set_bit().
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250411-dell-faux-v1-2-ea1f1c929b7e@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The dell-pc module only supports the thermal management Dell SMBIOS
feature, therefore it is pointless to have it loaded if this is not
available.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250411-dell-faux-v1-1-ea1f1c929b7e@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add entries to unsupported WMI codes in ideapad_keymap[] and one
check for WMI code 0x13d to trigger platform_profile_cycle().
Signed-off-by: Gašper Nemgar <gasper.nemgar@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250418070738.7171-1-gasper.nemgar@gmail.com
[ij: joined nested if ()s & major tweaks to changelog]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
ASUS firmware resets OOBE state during S4 suspend, so the keyboard
blinks during resume from hibernation. This patch disables OOBE state
after resume from hibernation.
Signed-off-by: Pavel Nikulin <pavel@noa-labs.com>
Link: https://lore.kernel.org/r/20250418140706.1691-1-pavel@noa-labs.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Extend thermal control support to Alienware m15 R7.
Cc: stable@vger.kernel.org
Tested-by: Romain THERY <romain.thery@ik.me>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250419-m15-r7-v1-1-18c6eaa27e25@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add Pantherlake ACPI device ID to the Intel HID driver.
While there, clean up the device ID table to remove the ", 0" parts.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Saranya Gopal <saranya.gopal@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250421041332.830136-1-saranya.gopal@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
error handling
wmax_thermal_information() may also return -ENOMSG, which would leave
`id` uninitialized in thermal_profile_probe.
Reorder and modify logic to catch all errors.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/Z_-KVqNbD9ygvE2X@stanley.mountain
Fixes: 27e9e6339896 ("platform/x86: alienware-wmi: Refactor thermal control methods")
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250416-smatch-fix-v1-1-35491b462d8f@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
In certain situations, the sysfs for uncore may not be present when all
CPUs in a package are offlined and then brought back online after boot.
This issue can occur if there is an error in adding the sysfs entry due
to a memory allocation failure. Retrying to bring the CPUs online will
not resolve the issue, as the uncore_cpu_mask is already set for the
package before the failure condition occurs.
This issue does not occur if the failure happens during module
initialization, as the module will fail to load in the event of any
error.
To address this, ensure that the uncore_cpu_mask is not set until the
successful return of uncore_freq_add_entry().
Fixes: dbce412a7733 ("platform/x86/intel-uncore-freq: Split common and enumeration part")
Signed-off-by: Shouye Liu <shouyeliu@tencent.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250417032321.75580-1-shouyeliu@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
When an APU exits HW sleep with no active wake sources the Linux kernel will
rapidly assert that the APU can enter back into HW sleep. This happens in a
few ms. Contrasting this to Windows, Windows can take 10s of seconds to
enter back into the resiliency phase for Modern Standby.
For some situations this can be problematic because it can cause leakage
from VDDCR_SOC to VDD_MISC and force VDD_MISC outside of the electrical
design guide specifications. On some designs this will trip the over
voltage protection feature (OVP) of the voltage regulator module, but it
could cause APU damage as well.
To prevent this risk, add an explicit sleep call so that future attempts
to enter into HW sleep will have enough time to settle. This will occur
while the screen is dark and only on cases that the APU should enter HW
sleep again, so it shouldn't be noticeable to any user.
Cc: stable@vger.kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20250414162446.3853194-1-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The ACPI byte code inside the ACPI control method responsible for
handling the WMI method calls uses a global buffer for constructing
the return value, yet the ACPI control method itself is not marked
as "Serialized".
This means that calling WMI methods on this WMI device is not
thread-safe, as concurrent WMI method calls will corrupt the global
buffer.
Fix this by serializing the WMI method calls using a mutex.
Cc: stable@vger.kernel.org # 6.x.x: 912d614ac99e: platform/x86: msi-wmi-platform: Rename "data" variable
Fixes: 9c0beb6b29e7 ("platform/x86: wmi: Add MSI WMI Platform driver")
Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250414140453.7691-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Rename field 'counter' in 'mlxreg_core_hotplug_platform_data' to count.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20250412091843.33943-2-vadimp@nvidia.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Rename the "data" variable inside msi_wmi_platform_read() to avoid
a name collision when the driver adds support for a state container
struct (that is to be called "data" too) in the future.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250414140453.7691-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Extend thermal control support to:
- Alienware Area-51m R2
- Alienware m16 R1
- Alienware m16 R2
- Dell G16 7630
- Dell G5 5505 SE
Cc: stable@vger.kernel.org
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250411-awcc-support-v1-2-09a130ec4560@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Some users report the Alienware m16 R1 models, support G-Mode. This was
manually verified by inspecting their ACPI tables.
Cc: stable@vger.kernel.org
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250411-awcc-support-v1-1-09a130ec4560@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
ccf395bde6ae ("platform/chrome: cros_ec_proto: Allow to build as module")
allows CROS_EC_PROTO to be a module.
The config is possible to be:
- CONFIG_ACPI=y
- CONFIG_CROS_EC=m
- CONFIG_MFD_CROS_EC_DEV=m
- CONFIG_CROS_EC_PROTO=m
- CONFIG_CROS_KBD_LED_BACKLIGHT=y
As a result:
ld: vmlinux.o: in function `keyboard_led_set_brightness_ec_pwm':
cros_kbd_led_backlight.c:(.text+0x3554e4c): undefined reference to `cros_ec_cmd_xfer_status'
ld: vmlinux.o: in function `keyboard_led_get_brightness_ec_pwm':
cros_kbd_led_backlight.c:(.text+0x3554f41): undefined reference to `cros_ec_cmd_xfer_status'
The built-in code in CROS_KBD_LED_BACKLIGHT can't find symbols defined in
the module CROS_EC_PROTO.
Let A=ACPI (bool), M=MFD_CROS_EC_DEV (tristate), and
K=CROS_KBD_LED_BACKLIGHT (tristate). The possible values are:
| A | M | choice for K |
------------------------
| y | y | y/m/n |
| y | m | m/n |
| y | n | y/m/n |
| n | y | y/m/n |
| n | m | m/n |
| n | n | n |
Fix the dependencies in the Kconfig.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/chrome-platform/ed8adc69-c505-4108-bf63-92911b0395c7@infradead.org/T/#u
Fixes: ccf395bde6ae ("platform/chrome: cros_ec_proto: Allow to build as module")
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20250414132427.204078-3-tzungbi@kernel.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
After applying 3a1d61dc3202 ("platform/chrome: cros_kbd_led_backlight:
Remove OF match"), cros_kbd_led_backlight no longer depends on CROS_EC
directly.
Remove the redundant dependency.
Fixes: 3a1d61dc3202 ("platform/chrome: cros_kbd_led_backlight: Remove OF match")
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20250414132427.204078-2-tzungbi@kernel.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
Collect AMD specific platform header files in <asm/amd/*.h>.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mario Limonciello <superm1@kernel.org>
Link: https://lore.kernel.org/r/20250413084144.3746608-7-mingo@kernel.org
|
|
Collect AMD specific platform header files in <asm/amd/*.h>.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Carlos Bilbao <carlos.bilbao@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mario Limonciello <superm1@kernel.org>
Cc: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Link: https://lore.kernel.org/r/20250413084144.3746608-5-mingo@kernel.org
|
|
Collect AMD specific platform header files in <asm/amd/*.h>.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mario Limonciello <superm1@kernel.org>
Link: https://lore.kernel.org/r/20250413084144.3746608-4-mingo@kernel.org
|
|
Remove ioremap and iounmap operations that are not needed. ioremap
and iounmap operations are handled by the caller of the pmc_add_pmt
function.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://lore.kernel.org/r/20250409191056.15434-7-xi.pardee@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
telemetry.h header file from PMT is not needed in arl.c or mtl.c.
Remove the cross-driver include to avoid confusion.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250409191056.15434-6-xi.pardee@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Convert the index variables type to be unsigned to avoid confusion
and error.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250409191056.15434-5-xi.pardee@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Move PMC devid definition for each PMC of Arrow Lake and Meteor
Lake platforms to core.h. This patch is a preparation step to
introduce a new SSRAM Telemetry driver which will be using the
PMC devid.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250409191056.15434-4-xi.pardee@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Rename core_ssram.c to ssram_telemetry.c. This patch is a
preparation step to introduce a new SSRAM Telemetry driver
for the SSRAM device.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250409191056.15434-3-xi.pardee@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Move functions that implements PMC Core feature from core_ssram.c
to core.c. This patch is a preparation step to introduce a new
SSRAM Telemetry driver for the SSRAM device.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250409191056.15434-2-xi.pardee@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250408-gpiochip-set-rv-platform-x86-v1-3-6f67e76a722c@linaro.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250408-gpiochip-set-rv-platform-x86-v1-2-6f67e76a722c@linaro.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Peter Korsgaard <peter.korsgaard@barco.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250408-gpiochip-set-rv-platform-x86-v1-1-6f67e76a722c@linaro.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Replace strcpy() and sprintf() for acpi_device_name/class() targets
with safer variant. In one case, scnprintf() is necessary but the
rest can use strscpy().
Link: https://lore.kernel.org/r/20250407170839.2153-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add a debugfs interface which exposes thermal private data.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250329-hwm-v7-9-a14ea39d8a94@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
All models with the "AWCC" WMAX device support a way of manually
controlling fans.
The PWM duty cycle of a fan can't be controlled directly. Instead the
AWCC interface let's us tune a fan `boost` value, which has the
following empirically discovered, approximate behavior over the PWM
value:
pwm = pwm_base + (fan_boost / 255) * (pwm_max - pwm_base)
Where the pwm_base is the locked PWM value controlled by the FW and
fan_boost is a value between 0 and 255.
Expose this fan_boost knob as a custom HWMON attribute.
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: linux-hwmon@vger.kernel.org
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250329-hwm-v7-8-a14ea39d8a94@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
All models with the "AWCC" WMAX device support monitoring fan speed and
temperature sensors. Expose this feature through the HWMON interface.
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: linux-hwmon@vger.kernel.org
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250329-hwm-v7-7-a14ea39d8a94@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
All models with the "AWCC" WMAX device support a "custom" thermal
profile. In some models this profile signals user-space that the user
wants to manually control the fans, which are always unlocked. In other
models it actually unlocks manual fan control.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250329-hwm-v7-6-a14ea39d8a94@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Get and store the AWCC system description in alienware_awcc_setup()
instead of awcc_platform_profile_probe() and get the correct offset by
iterating through each member of the system_description.
Then add a debug message for unmatched profiles and replace set_bit()
with it's non-atomic version __set_bit() because the choices bitmap only
belongs to this thread.
In the process also check for a malformed system description by defining
an arbitrary limit of resource count.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250329-hwm-v7-5-a14ea39d8a94@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Rename supported_thermal_profiles[] -> supported_profiles[] and change
it's type to u8 because it stores AWCC thermal IDs.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250329-hwm-v7-4-a14ea39d8a94@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Inline all AWCC WMI helper methods and directly return the newly
introduced awcc_wmi_command() helper to simplify implementation.
Drop awcc_thermal_control() in favor of awcc_op_activate_profile().
Add awcc_op_get_resource_id(), awcc_op_get_current_profile() and a new
failure code.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250329-hwm-v7-3-a14ea39d8a94@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Rename AWCC_SENSOR_ID_MASK to AWCC_SENSOR_ID_FLAG and reorder the ID
processing defines in a more logical manner. Then replace their use in
bitwise operations with FIELD_GET().
The latter also involves dropping the AWCC_SENSOR_ID_FLAG check inside
is_awcc_thermal_mode() in favor of extracting the first byte out of IDs
obtained with AWCC_OP_GET_RESOURCE_ID. This is also a requirement to add
support for Alienware Aurora desktops.
While at it, also rename is_awcc_thermal_mode() to
is_awcc_thermal_profile_id().
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250329-hwm-v7-2-a14ea39d8a94@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The "thermal" features of the WMAX WMI device are only present on the
host device if the ACPI _UID is "AWCC". Replace WMAX prefixes with
"AWCC" to reflect this relationship.
Thermal profiles with WMAX_PROFILE_BASIC prefix are also renamed to
WMAX_PROFILE_LEGACY because they are only supported in older versions
of this WMI device.
Finally, shorten enum defines for AWCC operations from WMAX_OPERATION_*
to AWCC_OP_*.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250329-hwm-v7-1-a14ea39d8a94@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
On some platforms it has been observed that STT limits are not being
applied properly causing poor performance as power limits are set too low.
STT limits that are sent to the platform are supposed to be in Q8.8
format. Convert them before sending.
Reported-by: Yijun Shen <Yijun.Shen@dell.com>
Fixes: 7c45534afa443 ("platform/x86/amd/pmf: Add support for PMF Policy Binary")
Cc: stable@vger.kernel.org
Tested-by: Yijun Shen <Yijun_Shen@Dell.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250407181915.1482450-1-superm1@kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
A warning is seen when running the latest kernel on a BlueField SOC:
[251.512704] ------------[ cut here ]------------
[251.512711] invalid sysfs_emit: buf:0000000003aa32ae
[251.512720] WARNING: CPU: 1 PID: 705264 at fs/sysfs/file.c:767 sysfs_emit+0xac/0xc8
The warning is triggered because the mlxbf-bootctl driver invokes
"sysfs_emit()" with a buffer pointer that is not aligned to the
start of the page. The driver should instead use "sysfs_emit_at()"
to support non-zero offsets into the destination buffer.
Fixes: 9886f575de5a ("platform/mellanox: mlxbf-bootctl: use sysfs_emit() instead of sprintf()")
Signed-off-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20250407132558.2418719-1-davthompson@nvidia.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The Vexia EDU ATLA 10 tablet comes in 2 different versions with
significantly different mainboards. The only outward difference is that
the charging barrel on one is marked 5V and the other is marked 9V.
Both are x86 ACPI tablets which ships with Android x86 as factory OS.
with a DSDT which contains a bunch of I2C devices which are not actually
there, causing various resource conflicts. Enumeration of these is skipped
through the acpi_quirk_skip_i2c_client_enumeration().
Extend the existing support for the 9V version by adding support for
manually instantiating the I2C devices which are actually present on
the 5V version by adding the necessary device info to
the x86-android-tablets module.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250407092017.273124-2-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The Vexia EDU ATLA 10 tablet comes in 2 different versions with
significantly different mainboards. The only outward difference is that
the charging barrel on one is marked 5V and the other is marked 9V.
Both need to be handled by the x86-android-tablets code. Add 9v to
the symbols for the existing support for the 9V Vexia EDU ATLA 10 tablet
symbols to prepare for adding support for the 5V version.
All this patch does is s/vexia_edu_atla10_info/vexia_edu_atla10_9v_info/.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250407092017.273124-1-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The value returned by acpi_evaluate_integer() is not checked,
but the result is not always successful, so it is necessary to
add a check of the returned value.
If the result remains negative during three iterations of the loop,
then the uninitialized variable 'val' will be used in the clamp_val()
macro, so it must be initialized with the current value of the 'curr'
variable.
In this case, the algorithm should be less noisy.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: b23910c2194e ("asus-laptop: Pegatron Lucid accelerometer")
Cc: stable@vger.kernel.org
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Link: https://lore.kernel.org/r/20250403122603.18172-1-arefev@swemel.ru
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Suggested-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Xin Li <xin@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Suggested-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Xin Li <xin@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Suggested-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Xin Li <xin@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Suggested-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Xin Li <xin@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Suggested-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Xin Li <xin@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Suggested-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Xin Li <xin@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Suggested-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Xin Li <xin@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
|
