summaryrefslogtreecommitdiff
path: root/drivers/platform
AgeCommit message (Collapse)Author
47 hoursMerge tag 'platform-drivers-x86-v6.16-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform drivers fixes from Ilpo Järvinen: "Mostly a few lines fixed here and there except amd/isp4 which improves swnodes relationships but that is a new driver not in any stable kernels yet. The think-lmi driver changes also look relatively large but there are just many fixes to it. The i2c/piix4 change is a effectively a revert of the commit 7e173eb82ae9 ("i2c: piix4: Make CONFIG_I2C_PIIX4 dependent on CONFIG_X86") but that required moving the header out from arch/x86 under include/linux/platform_data/ Summary: - amd/isp4: Improve swnode graph (new driver exception) - asus-nb-wmi: Use duo keyboard quirk for Zenbook Duo UX8406CA - dell-lis3lv02d: Add Latitude 5500 accelerometer address - dell-wmi-sysman: Fix WMI data block retrieval and class dev unreg - hp-bioscfg: Fix class device unregistration - i2c: piix4: Re-enable on non-x86 + move FCH header under platform_data/ - intel/hid: Wildcat Lake support - mellanox: - mlxbf-pmc: Fix duplicate event ID - mlxbf-tmfifo: Fix vring_desc.len assignment - mlxreg-lc: Fix bit-not-set logic check - nvsw-sn2201: Fix bus number in error message & spelling errors - portwell-ec: Move watchdog device under correct platform hierarchy - think-lmi: Error handling fixes (sysfs, kset, kobject, class dev unreg) - thinkpad_acpi: Handle HKEY 0x1402 event (2025 Thinkpads) - wmi: Fix WMI event enablement" * tag 'platform-drivers-x86-v6.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (22 commits) platform/x86: think-lmi: Fix sysfs group cleanup platform/x86: think-lmi: Fix kobject cleanup platform/x86: think-lmi: Create ksets consecutively platform/mellanox: mlxreg-lc: Fix logic error in power state check i2c: Re-enable piix4 driver on non-x86 Move FCH header to a location accessible by all archs platform/x86/intel/hid: Add Wildcat Lake support platform/x86: dell-wmi-sysman: Fix class device unregistration platform/x86: think-lmi: Fix class device unregistration platform/x86: hp-bioscfg: Fix class device unregistration platform/x86: Update swnode graph for amd isp4 platform/x86: dell-wmi-sysman: Fix WMI data block retrieval in sysfs callbacks platform/x86: wmi: Update documentation of WCxx/WExx ACPI methods platform/x86: wmi: Fix WMI event enablement platform/mellanox: nvsw-sn2201: Fix bus number in adapter error message platform/mellanox: Fix spelling and comment clarity in Mellanox drivers platform/mellanox: mlxbf-pmc: Fix duplicate event ID for CACHE_DATA1 platform/x86: thinkpad_acpi: handle HKEY 0x1402 event platform/x86: asus-nb-wmi: add DMI quirk for ASUS Zenbook Duo UX8406CA platform/x86: dell-lis3lv02d: Add Latitude 5500 ...
4 daysplatform/x86: think-lmi: Fix sysfs group cleanupKurt Borja
Many error paths in tlmi_sysfs_init() lead to sysfs groups being removed when they were not even created. Fix this by letting the kobject core manage these groups through their kobj_type's defult_groups. Fixes: a40cd7ef22fb ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms") Cc: stable@vger.kernel.org Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250630-lmi-fix-v3-3-ce4f81c9c481@gmail.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
4 daysplatform/x86: think-lmi: Fix kobject cleanupKurt Borja
In tlmi_analyze(), allocated structs with an embedded kobject are freed in error paths after the they were already initialized. Fix this by first by avoiding the initialization of kobjects in tlmi_analyze() and then by correctly cleaning them up in tlmi_release_attr() using their kset's kobject list. Fixes: a40cd7ef22fb ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms") Fixes: 30e78435d3bf ("platform/x86: think-lmi: Split kobject_init() and kobject_add() calls") Cc: stable@vger.kernel.org Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250630-lmi-fix-v3-2-ce4f81c9c481@gmail.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
4 daysplatform/x86: think-lmi: Create ksets consecutivelyKurt Borja
Avoid entering tlmi_release_attr() in error paths if both ksets are not yet created. This is accomplished by initializing them side by side. Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250630-lmi-fix-v3-1-ce4f81c9c481@gmail.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
6 daysplatform/mellanox: mlxreg-lc: Fix logic error in power state checkAlok Tiwari
Fixes a logic issue in mlxreg_lc_completion_notify() where the intention was to check if MLXREG_LC_POWERED flag is not set before powering on the device. The original code used "state & ~MLXREG_LC_POWERED" to check for the absence of the POWERED bit. However this condition evaluates to true even when other bits are set, leading to potentially incorrect behavior. Corrected the logic to explicitly check for the absence of MLXREG_LC_POWERED using !(state & MLXREG_LC_POWERED). Fixes: 62f9529b8d5c ("platform/mellanox: mlxreg-lc: Add initial support for Nvidia line card devices") Suggested-by: Vadim Pasternak <vadimp@nvidia.com> Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Link: https://lore.kernel.org/r/20250630105812.601014-1-alok.a.tiwari@oracle.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
6 daysMove FCH header to a location accessible by all archsMario Limonciello
A new header fch.h was created to store registers used by different AMD drivers. This header was included by i2c-piix4 in commit 624b0d5696a8 ("i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH definitions to <asm/amd/fch.h>"). To prevent compile failures on non-x86 archs i2c-piix4 was set to only compile on x86 by commit 7e173eb82ae9717 ("i2c: piix4: Make CONFIG_I2C_PIIX4 dependent on CONFIG_X86"). This was not a good decision because loongarch and mips both actually support i2c-piix4 and set it enabled in the defconfig. Move the header to a location accessible by all architectures. Fixes: 624b0d5696a89 ("i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH definitions to <asm/amd/fch.h>") Suggested-by: Hans de Goede <hansg@kernel.org> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Hans de Goede <hansg@kernel.org> Link: https://lore.kernel.org/r/20250610205817.3912944-1-superm1@kernel.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
6 daysplatform/x86/intel/hid: Add Wildcat Lake supportSrinivas Pandruvada
Add ACPI ID for Wildcat Lake. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://lore.kernel.org/r/20250617232913.3314765-1-srinivas.pandruvada@linux.intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
6 daysplatform/x86: dell-wmi-sysman: Fix class device unregistrationKurt Borja
Devices under the firmware_attributes_class do not have unique a dev_t. Therefore, device_unregister() should be used instead of device_destroy(), since the latter may match any device with a given dev_t. Fixes: e8a60aa7404b ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems") Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250625-dest-fix-v1-3-3a0f342312bb@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
6 daysplatform/x86: think-lmi: Fix class device unregistrationKurt Borja
Devices under the firmware_attributes_class do not have unique a dev_t. Therefore, device_unregister() should be used instead of device_destroy(), since the latter may match any device with a given dev_t. Fixes: a40cd7ef22fb ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms") Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250625-dest-fix-v1-2-3a0f342312bb@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
6 daysplatform/x86: hp-bioscfg: Fix class device unregistrationKurt Borja
Devices under the firmware_attributes_class do not have unique a dev_t. Therefore, device_unregister() should be used instead of device_destroy(), since the latter may match any device with a given dev_t. Fixes: a34fc329b189 ("platform/x86: hp-bioscfg: bioscfg") Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250625-dest-fix-v1-1-3a0f342312bb@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
6 daysplatform/x86: Update swnode graph for amd isp4Pratap Nirujogi
Existing swnode graph format is specific to sensor device and is causing conflicts when accessing standard property variables outside the sensor driver. To address this issue, enhanced swnode graph format with dedicated nodes for i2c and isp devices, with sensor node added as child to i2c node. This approach allows to have standard property variables (ex: 'clock-frequency') with values applicable for each of the devices (sensor, i2c and isp). ACPI device driver_data handle is also initialized with root camera swnode to access the property variables in the graph in isp and i2c drivers. Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20250618202958.3934822-1-pratap.nirujogi@amd.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
6 daysplatform/x86: dell-wmi-sysman: Fix WMI data block retrieval in sysfs callbacksKurt Borja
After retrieving WMI data blocks in sysfs callbacks, check for the validity of them before dereferencing their content. Reported-by: Jan Graczyk <jangraczyk@yahoo.ca> Closes: https://lore.kernel.org/r/CAHk-=wgMiSKXf7SvQrfEnxVtmT=QVQPjJdNjfm3aXS7wc=rzTw@mail.gmail.com/ Fixes: e8a60aa7404b ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250630-sysman-fix-v2-1-d185674d0a30@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
10 daysplatform/x86: wmi: Fix WMI event enablementArmin Wolf
It turns out that the Windows WMI-ACPI driver always enables/disables WMI events regardless of whether they are marked as expensive or not. This finding is further reinforced when reading the documentation of the WMI_FUNCTION_CONTROL_CALLBACK callback used by Windows drivers for enabling/disabling WMI devices: The DpWmiFunctionControl routine enables or disables notification of events, and enables or disables data collection for data blocks that the driver registered as expensive to collect. Follow this behavior to fix the WMI event used for reporting hotkey events on the Dell Latitude 5400 and likely many more devices. Reported-by: Dmytro Bagrii <dimich.dmb@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220246 Tested-by: Dmytro Bagrii <dimich.dmb@gmail.com> Fixes: 656f0961d126 ("platform/x86: wmi: Rework WCxx/WExx ACPI method handling") Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20250619221440.6737-1-W_Armin@gmx.de Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
10 daysplatform/mellanox: nvsw-sn2201: Fix bus number in adapter error messageAlok Tiwari
change error log to use correct bus number from main_mux_devs instead of cpld_devs. Fixes: 662f24826f95 ("platform/mellanox: Add support for new SN2201 system") Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Reviewed-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20250622072921.4111552-2-alok.a.tiwari@oracle.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
10 daysplatform/mellanox: Fix spelling and comment clarity in Mellanox driversAlok Tiwari
This commit corrects several minor typographical errors in comments and error messages across multiple Mellanox platform driver. Fixed spelling of "thresholds", "region", "platform", "default", and removed redundant spaces in comment strings and error logs. These changes are cosmetic and do not affect runtime behavior. Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Reviewed-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: David Thompson <davthompson@nvidia.com> Link: https://lore.kernel.org/r/20250622072921.4111552-1-alok.a.tiwari@oracle.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
11 daysplatform/x86: Use i2c adapter name to fix build errorsPratap Nirujogi
Use adapater->name inplace of adapter->owner->name to fix build issues when CONFIG_MODULES is not defined. Fixes: 90b85567e457 ("platform/x86: Add AMD ISP platform config for OV05C10") Reported-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/all/04577a46-9add-420c-b181-29bad582026d@infradead.org Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com> Requires: 942e1aece13e ("i2c: designware: Initialize adapter name only when not set" Requires: c8dc57916973 ("i2c: amd-isp: Initialize unique adapter name") Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20250609155601.1477055-4-pratap.nirujogi@amd.com
11 daysplatform/mellanox: mlxbf-pmc: Fix duplicate event ID for CACHE_DATA1Alok Tiwari
same ID (103) was assigned to both GDC_BANK0_G_RSE_PIPE_CACHE_DATA0 and GDC_BANK0_G_RSE_PIPE_CACHE_DATA1. This could lead to incorrect event mapping. Updated the ID to 104 to ensure uniqueness. Fixes: 423c3361855c ("platform/mellanox: mlxbf-pmc: Add support for BlueField-3") Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Reviewed-by: David Thompson <davthompson@nvidia.com> Link: https://lore.kernel.org/r/20250619060502.3594350-1-alok.a.tiwari@oracle.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
11 daysplatform/x86: thinkpad_acpi: handle HKEY 0x1402 eventMark Pearson
2025 Thinkpads F11 key launch the Intel Unison app on Windows, which does some sort of smart sharing between laptop and phone. Map this key event to KEY_LINK_PHONE as the closest thing we have. This prevents an error message being displayed on key press. Reported-by: Damjan Georgievski <gdamjan@gmail.com> Closes: https://sourceforge.net/p/ibm-acpi/mailman/message/59189556/ Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca> Link: https://lore.kernel.org/r/20250620181119.2519546-1-mpearson-lenovo@squebb.ca [ij: converted directory to pre-lenovo move as this is fixes material.] Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
11 daysplatform/x86: asus-nb-wmi: add DMI quirk for ASUS Zenbook Duo UX8406CARahul Chandra
Add a DMI quirk entry for the ASUS Zenbook Duo UX8406CA 2025 model to use the existing zenbook duo keyboard quirk. Signed-off-by: Rahul Chandra <rahul@chandra.net> Link: https://lore.kernel.org/r/20250624073301.602070-1-rahul@chandra.net Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
11 daysplatform/x86: dell-lis3lv02d: Add Latitude 5500Paul Menzel
Add 0x29 as the accelerometer address for the Dell Latitude 5500 to lis3lv02d_devices[]. The address was verified as below: $ cd /sys/bus/pci/drivers/i801_smbus/0000:00:1f.4 $ ls -d i2c-? i2c-2 $ sudo modprobe i2c-dev $ sudo i2cdetect 2 WARNING! This program can confuse your I2C bus, cause data loss and worse! I will probe file /dev/i2c-2. I will probe address range 0x08-0x77. Continue? [Y/n] Y 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: 08 -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- 29 -- -- -- -- -- -- 30: 30 -- -- -- -- 35 UU UU -- -- -- -- -- -- -- -- 40: -- -- -- -- 44 -- -- -- -- -- -- -- -- -- -- -- 50: UU -- 52 -- -- -- -- -- -- -- -- -- -- -- -- -- 60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 70: -- -- -- -- -- -- -- -- $ echo lis3lv02d 0x29 | sudo tee /sys/bus/i2c/devices/i2c-2/new_device lis3lv02d 0x29 $ sudo dmesg [ 0.000000] Linux version 6.12.32-amd64 (debian-kernel@lists.debian.org) (x86_64-linux-gnu-gcc-14 (Debian 14.2.0-19) 14.2.0, GNU ld (GNU Binutils for Debian) 2.44) #1 SMP PREEMPT_DYNAMIC Debian 6.12.32-1 (2025-06-07) […] [ 0.000000] DMI: Dell Inc. Latitude 5500/0M14W7, BIOS 1.38.0 03/06/2025 […] [ 609.063488] i2c_dev: i2c /dev entries driver [ 639.135020] i2c i2c-2: new_device: Instantiated device lis3lv02d at 0x29 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by: Hans de Goede <hansg@kernel.org> Link: https://lore.kernel.org/r/20250622080721.4661-1-pmenzel@molgen.mpg.de Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-17platform/mellanox: mlxbf-tmfifo: fix vring_desc.len assignmentDavid Thompson
Fix warnings reported by sparse, related to incorrect type: drivers/platform/mellanox/mlxbf-tmfifo.c:284:38: warning: incorrect type in assignment (different base types) drivers/platform/mellanox/mlxbf-tmfifo.c:284:38: expected restricted __virtio32 [usertype] len drivers/platform/mellanox/mlxbf-tmfifo.c:284:38: got unsigned long Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202404040339.S7CUIgf3-lkp@intel.com/ Fixes: 78034cbece79 ("platform/mellanox: mlxbf-tmfifo: Drop the Rx packet if no more descriptors") Signed-off-by: David Thompson <davthompson@nvidia.com> Link: https://lore.kernel.org/r/20250613214608.2250130-1-davthompson@nvidia.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-17platform/x86: portwell-ec: Move watchdog device under correct platform hierarchyIvan Hu
Without explicitly setting a parent for the watchdog device, the device is registered with a NULL parent. This causes device_add() (called internally by devm_watchdog_register_device()) to register the device under /sys/devices/virtual, since no parent is provided. The result is: DEVPATH=/devices/virtual/watchdog/watchdog0 To fix this, assign &pdev->dev as the parent of the watchdog device before calling devm_watchdog_register_device(). This ensures the device is associated with the Portwell EC platform device and placed correctly in sysfs as: DEVPATH=/devices/platform/portwell-ec/watchdog/watchdog0 This aligns the device hierarchy with expectations and avoids misplacement under the virtual class. Fixes: 835796753310 ("platform/x86: portwell-ec: Add GPIO and WDT driver for Portwell EC") Signed-off-by: Ivan Hu <ivan.hu@canonical.com> Link: https://lore.kernel.org/r/20250616074819.63547-1-ivan.hu@canonical.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-13Revert "platform/x86: alienware-wmi-wmax: Add G-Mode support to Alienware ↵Kurt Borja
m16 R1" This reverts commit 5ff79cabb23a2f14d2ed29e9596aec908905a0e6. Although the Alienware m16 R1 AMD model supports G-Mode, it actually has a lower power ceiling than plain "performance" profile, which results in lower performance. Reported-by: Cihan Ozakca <cozakca@outlook.com> Cc: stable@vger.kernel.org # 6.15.x Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250611-m16-rev-v1-1-72d13bad03c9@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-13platform/x86/amd/pmc: Add PCSpecialist Lafite Pro V 14M to 8042 quirks listMario Limonciello
Every other s2idle cycle fails to reach hardware sleep when keyboard wakeup is enabled. This appears to be an EC bug, but the vendor refuses to fix it. It was confirmed that turning off i8042 wakeup avoids ths issue (albeit keyboard wakeup is disabled). Take the lesser of two evils and add it to the i8042 quirk list. Reported-by: Raoul <ein4rth@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220116 Tested-by: Raoul <ein4rth@gmail.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20250611203341.3733478-1-superm1@kernel.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-12platform/x86/intel-uncore-freq: avoid non-literal format stringArnd Bergmann
Using a string variable in place of a format string causes a W=1 build warning: drivers/platform/x86/intel/uncore-frequency/uncore-frequency-common.c:61:40: error: format string is not a string literal (potentially insecure) [-Werror,-Wformat-security] 61 | length += sysfs_emit_at(buf, length, agent_name[agent]); | ^~~~~~~~~~~~~~~~~ Use the safer "%s" format string to print it instead. Fixes: b98fa870fce2 ("platform/x86/intel-uncore-freq: Add attributes to show agent types") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://lore.kernel.org/r/20250610093459.2646337-1-arnd@kernel.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-12platform/x86/intel/pmc: Add Panther Lake support to Intel PMC SSRAM TelemetryXi Pardee
Add Panther Lake support to Intel PMC SSRAM Telemetry driver. Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com> Link: https://lore.kernel.org/r/20250610230416.622970-2-xi.pardee@linux.intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-12platform/x86/intel/pmc: Add Lunar Lake support to Intel PMC SSRAM TelemetryXi Pardee
Add Lunar Lake support to Intel PMC SSRAM Telemetry driver. Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com> Link: https://lore.kernel.org/r/20250610230416.622970-1-xi.pardee@linux.intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-10platform/x86: dell_rbu: Bump versionStuart Hayes
Bump the module version. Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com> Link: https://lore.kernel.org/r/20250609184659.7210-6-stuart.w.hayes@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-10platform/x86: dell_rbu: Stop overwriting data bufferStuart Hayes
The dell_rbu driver will use memset() to clear the data held by each packet when it is no longer needed (when the driver is unloaded, the packet size is changed, etc). The amount of memory that is cleared (before this patch) is the normal packet size. However, the last packet in the list may be smaller. Fix this to only clear the memory actually used by each packet, to prevent it from writing past the end of data buffer. Because the packet data buffers are allocated with __get_free_pages() (in page-sized increments), this bug could only result in a buffer being overwritten when a packet size larger than one page is used. The only user of the dell_rbu module should be the Dell BIOS update program, which uses a packet size of 4096, so no issues should be seen without the patch, it just blocks the possiblity. Fixes: 6c54c28e69f2 ("[PATCH] dell_rbu: new Dell BIOS update driver") Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com> Link: https://lore.kernel.org/r/20250609184659.7210-5-stuart.w.hayes@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-10platform/x86: dell_rbu: Fix list usageStuart Hayes
Pass the correct list head to list_for_each_entry*() when looping through the packet list. Without this patch, reading the packet data via sysfs will show the data incorrectly (because it starts at the wrong packet), and clearing the packet list will result in a NULL pointer dereference. Fixes: d19f359fbdc6 ("platform/x86: dell_rbu: don't open code list_for_each_entry*()") Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com> Link: https://lore.kernel.org/r/20250609184659.7210-3-stuart.w.hayes@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-10platform/x86: dell_rbu: Fix lock context warningStuart Hayes
Fix a sparse lock context warning. Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com> Link: https://lore.kernel.org/r/20250609184659.7210-2-stuart.w.hayes@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-10platform/x86/amd: pmf: Simplify error flow in amd_pmf_init_smart_pc()Mario Limonciello
commit 5b1122fc4995f ("platform/x86/amd/pmf: fix cleanup in amd_pmf_init_smart_pc()") adjusted the error handling flow to use a ladder but this isn't actually needed because work is only scheduled in amd_pmf_start_policy_engine() and with device managed cleanups pointers for allocations don't need to be freed. Adjust the error flow to a single call to amd_pmf_deinit_smart_pc() for the cases that need to clean up. Cc: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/20250512211154.2510397-4-superm1@kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20250522003457.1516679-4-superm1@kernel.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-10platform/x86/amd: pmf: Prevent amd_pmf_tee_deinit() from running twiceMario Limonciello
If any of the tee init fails, pass up the errors and clear the tee_ctx pointer. This will prevent cleaning up multiple times. Fixes: ac052d8c08f9d ("platform/x86/amd/pmf: Add PMF TEE interface") Suggested-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/20250512211154.2510397-3-superm1@kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20250522003457.1516679-3-superm1@kernel.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-10platform/x86/amd: pmf: Use device managed allocationsMario Limonciello
If setting up smart PC fails for any reason then this can lead to a double free when unloading amd-pmf. This is because dev->buf was freed but never set to NULL and is again freed in amd_pmf_remove(). To avoid subtle allocation bugs in failures leading to a double free change all allocations into device managed allocations. Fixes: 5b1122fc4995f ("platform/x86/amd/pmf: fix cleanup in amd_pmf_init_smart_pc()") Link: https://lore.kernel.org/r/20250512211154.2510397-2-superm1@kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20250522003457.1516679-2-superm1@kernel.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-09x86/platform/amd: replace down_timeout() with down_interruptible()Jake Hillion
Currently hsmp_send_message() uses down_timeout() with a 100ms timeout to take the semaphore. However __hsmp_send_message(), the content of the critical section, has a sleep in it. On systems with significantly delayed scheduling behaviour this may take over 100ms. Convert this method to down_interruptible(). Leave the error handling the same as the documentation currently is not specific about what error is returned. Previous behaviour: a caller who competes with another caller stuck in the critical section due to scheduler delays would receive -ETIME. New behaviour: a caller who competes with another caller stuck in the critical section due to scheduler delays will complete successfully. Reviewed-by: Suma Hegde <suma.hegde@amd.com> Tested-by: Suma Hegde <suma.hegde@amd.com> Signed-off-by: Jake Hillion <jake@hillion.co.uk> Link: https://lore.kernel.org/r/20250605-amd-hsmp-v2-2-a811bc3dd74a@hillion.co.uk Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-09x86/platform/amd: move final timeout check to after final sleepJake Hillion
__hsmp_send_message sleeps between result read attempts and has a timeout of 100ms. Under extreme load it's possible for these sleeps to take a long time, exceeding the 100ms. In this case the current code does not check the register and fails with ETIMEDOUT. Refactor the loop to ensure there is at least one read of the register after a sleep of any duration. This removes instances of ETIMEDOUT with a single caller, even with a misbehaving scheduler. Tested on AMD Bergamo machines. Suggested-by: Blaise Sanouillet <linux@blaise.sanouillet.com> Reviewed-by: Suma Hegde <suma.hegde@amd.com> Tested-by: Suma Hegde <suma.hegde@amd.com> Signed-off-by: Jake Hillion <jake@hillion.co.uk> Link: https://lore.kernel.org/r/20250605-amd-hsmp-v2-1-a811bc3dd74a@hillion.co.uk Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-09platform/x86/amd: pmc: Clear metrics table at start of cycleMario Limonciello
The area of memory that contains the metrics table may contain garbage when the cycle starts. This normally doesn't matter because the cycle itself will populate it with valid data, however commit 9f5595d5f03fd ("platform/x86/amd: pmc: Require at least 2.5 seconds between HW sleep cycles") started to use it during the check() phase. Depending upon what garbage is in the table it's possible that the system will wait 2.5 seconds for even the first cycle, which will be visible to a user. To prevent this from happening explicitly clear the table when logging is started. Fixes: 9f5595d5f03fd ("platform/x86/amd: pmc: Require at least 2.5 seconds between HW sleep cycles") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20250603132412.3555302-1-superm1@kernel.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-09platform/x86/intel: power-domains: Fix error code in tpmi_init()Dan Carpenter
Return -ENOMEM instead of success if kcalloc() fails. Fixes: e37be5d85c60 ("platform/x86/intel: power-domains: Add interface to get Linux die ID") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/aEKvIGCt6d8Gcx4S@stanley.mountain Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-09platform/x86: samsung-galaxybook: Add SAM0426Joshua Grisham
Add device ID SAM0426 (Notebook 9 Pro and similar devices) as reported and tested by GitHub user "diego-karsa" [1]. [1]: https://github.com/joshuagrisham/samsung-galaxybook-extras/issues/69 Signed-off-by: Joshua Grisham <josh@joshuagrisham.com> Reviewed-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20250606130909.207047-1-josh@joshuagrisham.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-09platform/x86/intel-uncore-freq: Fail module load when plat_info is NULLSrinivas Pandruvada
Address a Smatch static checker warning regarding an unchecked dereference in the function call: set_cdie_id(i, cluster_info, plat_info) when plat_info is NULL. Instead of addressing this one case, in general if plat_info is NULL then it can cause other issues. For example in a two package system it will give warning for duplicate sysfs entry as package ID will be always zero for both packages when creating string for attribute group name. plat_info is derived from TPMI ID TPMI_BUS_INFO, which is integral to the core TPMI design. Therefore, it should not be NULL on a production platform. Consequently, the module should fail to load if plat_info is NULL. Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/platform-driver-x86/aEKvGCLd1qmX04Tc@stanley.mountain/T/#u Fixes: 8a54e2253e4c ("platform/x86/intel-uncore-freq: Uncore frequency control via TPMI") Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250606205300.2384494-1-srinivas.pandruvada@linux.intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-09platform/x86: ideapad-laptop: use usleep_range() for EC pollingRong Zhang
It was reported that ideapad-laptop sometimes causes some recent (since 2024) Lenovo ThinkBook models shut down when: - suspending/resuming - closing/opening the lid - (dis)connecting a charger - reading/writing some sysfs properties, e.g., fan_mode, touchpad - pressing down some Fn keys, e.g., Brightness Up/Down (Fn+F5/F6) - (seldom) loading the kmod The issue has existed since the launch day of such models, and there have been some out-of-tree workarounds (see Link:) for the issue. One disables some functionalities, while another one simply shortens IDEAPAD_EC_TIMEOUT. The disabled functionalities have read_ec_data() in their call chains, which calls schedule() between each poll. It turns out that these models suffer from the indeterminacy of schedule() because of their low tolerance for being polled too frequently. Sometimes schedule() returns too soon due to the lack of ready tasks, causing the margin between two polls to be too short. In this case, the command is somehow aborted, and too many subsequent polls (they poll for "nothing!") may eventually break the state machine in the EC, resulting in a hard shutdown. This explains why shortening IDEAPAD_EC_TIMEOUT works around the issue - it reduces the total number of polls sent to the EC. Even when it doesn't lead to a shutdown, frequent polls may also disturb the ongoing operation and notably delay (+ 10-20ms) the availability of EC response. This phenomenon is unlikely to be exclusive to the models mentioned above, so dropping the schedule() manner should also slightly improve the responsiveness of various models. Fix these issues by migrating to usleep_range(150, 300). The interval is chosen to add some margin to the minimal 50us and considering EC responses are usually available after 150-2500us based on my test. It should be enough to fix these issues on all models subject to the EC bug without introducing latency on other models. Tested on ThinkBook 14 G7+ ASP and solved both issues. No regression was introduced in the test on a model without the EC bug (ThinkBook X IMH, thanks Eric). Link: https://github.com/ty2/ideapad-laptop-tb2024g6plus/commit/6c5db18c9e8109873c2c90a7d2d7f552148f7ad4 Link: https://github.com/ferstar/ideapad-laptop-tb/commit/42d1e68e5009529d31bd23f978f636f79c023e80 Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218771 Fixes: 6a09f21dd1e2 ("ideapad: add ACPI helpers") Cc: stable@vger.kernel.org Tested-by: Felix Yan <felixonmars@archlinux.org> Tested-by: Eric Long <i@hack3r.moe> Tested-by: Jianfei Zhang <zhangjianfei3@gmail.com> Tested-by: Mingcong Bai <jeffbai@aosc.io> Tested-by: Minh Le <minhld139@gmail.com> Tested-by: Sicheng Zhu <Emmet_Z@outlook.com> Signed-off-by: Rong Zhang <i@rong.moe> Link: https://lore.kernel.org/r/20250525201833.37939-1-i@rong.moe Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-08treewide, timers: Rename from_timer() to timer_container_of()Ingo Molnar
Move this API to the canonical timer_*() namespace. [ tglx: Redone against pre rc1 ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
2025-06-07Merge tag 'loongarch-6.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch updates from Huacai Chen: - Adjust the 'make install' operation - Support SCHED_MC (Multi-core scheduler) - Enable ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS - Enable HAVE_ARCH_STACKLEAK - Increase max supported CPUs up to 2048 - Introduce the numa_memblks conversion - Add PWM controller nodes in dts - Some bug fixes and other small changes * tag 'loongarch-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: platform/loongarch: laptop: Unregister generic_sub_drivers on exit platform/loongarch: laptop: Add backlight power control support platform/loongarch: laptop: Get brightness setting from EC on probe LoongArch: dts: Add PWM support to Loongson-2K2000 LoongArch: dts: Add PWM support to Loongson-2K1000 LoongArch: dts: Add PWM support to Loongson-2K0500 LoongArch: vDSO: Correctly use asm parameters in syscall wrappers LoongArch: Fix panic caused by NULL-PMD in huge_pte_offset() LoongArch: Preserve firmware configuration when desired LoongArch: Avoid using $r0/$r1 as "mask" for csrxchg LoongArch: Introduce the numa_memblks conversion LoongArch: Increase max supported CPUs up to 2048 LoongArch: Enable HAVE_ARCH_STACKLEAK LoongArch: Enable ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS LoongArch: Add SCHED_MC (Multi-core scheduler) support LoongArch: Add some annotations in archhelp LoongArch: Using generic scripts/install.sh in `make install` LoongArch: Add a default install.sh
2025-06-07platform/loongarch: laptop: Unregister generic_sub_drivers on exitYao Zi
Without correct unregisteration, ACPI notify handlers and the platform drivers installed by generic_subdriver_init() will become dangling references after removing the loongson_laptop module, triggering various kernel faults when a hotkey is sent or at kernel shutdown. Cc: stable@vger.kernel.org Fixes: 6246ed09111f ("LoongArch: Add ACPI-based generic laptop driver") Signed-off-by: Yao Zi <ziyao@disroot.org> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-06-07platform/loongarch: laptop: Add backlight power control supportYao Zi
loongson_laptop_turn_{on,off}_backlight() are designed for controlling the power of the backlight, but they aren't really used in the driver previously. Unify these two functions since they only differ in arguments passed to ACPI method, and wire up loongson_laptop_backlight_update() to update the power state of the backlight as well. Tested on the TongFang L860-T2 Loongson-3A5000 laptop. Cc: stable@vger.kernel.org Fixes: 6246ed09111f ("LoongArch: Add ACPI-based generic laptop driver") Signed-off-by: Yao Zi <ziyao@disroot.org> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-06-06platform/loongarch: laptop: Get brightness setting from EC on probeYao Zi
Previously during driver probe, 1 is unconditionally taken as current brightness value and set to props.brightness, which will be considered as the brightness before suspend and restored to EC on resume. Since a brightness value of 1 almost never matches EC's state on coldboot (my laptop's EC defaults to 80), this causes surprising changes of screen brightness on the first time of resume after coldboot. Let's get brightness from EC and take it as the current brightness on probe of the laptop driver to avoid the surprising behavior. Tested on TongFang L860-T2 Loongson-3A5000 laptop. Cc: stable@vger.kernel.org Fixes: 6246ed09111f ("LoongArch: Add ACPI-based generic laptop driver") Signed-off-by: Yao Zi <ziyao@disroot.org> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-05-31Merge tag 'soc-drivers-6.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC driver updates from Arnd Bergmann: "Updates are across the usual driver subsystems with SoC specific drivers: - added soc specicific drivers for sophgo cv1800 and sg2044, qualcomm sm8750, and amlogic c3 and s4 chips. - cache controller updates for sifive chips, plus binding changes for other cache descriptions. - memory controller drivers for mediatek mt6893, stm32 and cleanups for a few more drivers - reset controller drivers for T-Head TH1502, Sophgo sg2044 and Renesas RZ/V2H(P) - SCMI firmware updates to better deal with buggy firmware, plus better support for Qualcomm X1E and NXP i.MX specific interfaces - a new platform driver for the crypto firmware on Cznic Turris Omnia/MOX - cleanups for the TEE firmware subsystem and amdtee driver - minor updates and fixes for freescale/nxp, qualcomm, google, aspeed, wondermedia, ti, nxp, renesas, hisilicon, mediatek, broadcom and samsung SoCs" * tag 'soc-drivers-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (133 commits) soc: aspeed: Add NULL check in aspeed_lpc_enable_snoop() soc: aspeed: lpc: Fix impossible judgment condition ARM: aspeed: Don't select SRAM docs: firmware: qcom_scm: Fix kernel-doc warning soc: fsl: qe: Consolidate chained IRQ handler install/remove firmware: qcom: scm: Allow QSEECOM for HP EliteBook Ultra G1q dt-bindings: mfd: qcom,tcsr: Add compatible for ipq5018 dt-bindings: cache: add QiLai compatible to ax45mp memory: stm32_omm: Fix error handling in stm32_omm_disable_child() dt-bindings: cache: Convert marvell,tauros2-cache to DT schema dt-bindings: cache: Convert marvell,{feroceon,kirkwood}-cache to DT schema soc: samsung: exynos-pmu: enable CPU hotplug support for gs101 MAINTAINERS: Add google,gs101-pmu-intr-gen.yaml binding file dt-bindings: soc: samsung: exynos-pmu: gs101: add google,pmu-intr-gen phandle dt-bindings: soc: google: Add gs101-pmu-intr-gen binding documentation bus: fsl-mc: Use strscpy() instead of strscpy_pad() soc: fsl: qbman: Remove const from portal->cgrs allocation type bus: fsl_mc: Fix driver_managed_dma check bus: fsl-mc: increase MC_CMD_COMPLETION_TIMEOUT_MS value bus: fsl-mc: drop useless cleanup ...
2025-05-29Merge tag 'platform-drivers-x86-v6.16-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform drivers updates from Ilpo Järvinen: "The changes are mostly business as usual. Besides pdx86 changes, there are a few power supply changes needed for related pdx86 features, move of oxpec driver from hwmon (oxp-sensors) to pdx86, and one FW version warning to hid-asus. Highlights: - alienware-wmi-wmax: - Add HWMON support - Add ABI and admin-guide documentation - Expose GPIO debug methods through debug FS - Support manual fan control and "custom" thermal profile - amd/hsmp: - Add sysfs files to show HSMP telemetry - Report power readings and limits via hwmon - amd/isp4: Add AMD ISP platform config for OV05C10 - asus-wmi: - Refactor Ally suspend/resume to work better with older FW - hid-asus: check ROG Ally MCU version and warn about old FW versions - dasharo-acpi: - Add driver for Dasharo devices supporting fans and temperatures monitoring - dell-ddv: - Expose the battery health and manufacture date to userspace using power supply extensions - Implement the battery matching algorithm - dell-pc: - Improve error propagation - Use faux device - int3472: - Add delays to avoid GPIO regulator spikes - Add handshake pin support - Make regulator supply name configurable and allow registering more than 1 GPIO regulator - Map mt9m114 powerdown pin to powerenable - intel/pmc: Add separate SSRAM Telemetry driver - intel-uncore-freq: Add attributes to show agent types and die ID - ISST: - Support SST-TF revision 2 (allows more cores per bucket) - Support SST-PP revision 2 (fabric 1 frequencies) - Remove unnecessary SST MSRs restore (the package retains MSRs despite CPU offlining) - mellanox: Add support for SN2201, SN4280, SN5610, and SN5640 - mellanox: mlxbf-pmc: Support additional PMC blocks - oxpec: - Add OneXFly variants - Add support for charge limit, charge thresholds, and turbo LED - Distinguish current X1 variants to avoid unwanted matching to new variants - Follow hwmon conventions - Move from hwmon/oxp-sensors to platform/x86 to match the enlarged scope - power supply: - Add inhibit-charge-awake (needed by oxpec) - Add additional battery health status values ("blown fuse" and "cell imbalance") (needed by dell-ddv) - powerwell-ec: Add driver for Portwell EC supporting GPIO and watchdog - thinkpad-acpi: Support camera shutter switch hotkey - tuxedo: Add virtual LampArray for TUXEDO NB04 devices - tools/power/x86/intel-speed-select: - Support displaying SST-PP revision 2 fields - Skip uncore frequency update on newer generations of CPUs - Miscellaneous cleanups / refactoring / improvements" * tag 'platform-drivers-x86-v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (112 commits) thermal/drivers/acerhdf: Constify struct thermal_zone_device_ops platform/x86/amd/hsmp: fix building with CONFIG_HWMON=m platform/x86: asus-wmi: fix build without CONFIG_SUSPEND docs: ABI: Fix "aassociated" to "associated" platform/x86: Add AMD ISP platform config for OV05C10 Documentation: admin-guide: pm: Add documentation for die_id platform/x86/intel-uncore-freq: Add attributes to show die_id platform/x86/intel: power-domains: Add interface to get Linux die ID Documentation: admin-guide: pm: Add documentation for agent_types platform/x86/intel-uncore-freq: Add attributes to show agent types platform/x86/tuxedo: Prevent invalid Kconfig state platform/x86: dell-ddv: Expose the battery health to userspace platform/x86: dell-ddv: Expose the battery manufacture date to userspace platform/x86: dell-ddv: Implement the battery matching algorithm power: supply: core: Add additional health status values platform/x86/amd/hsmp: acpi: Add sysfs files to display HSMP telemetry platform/x86/amd/hsmp: Report power via hwmon sensors platform/x86/amd/hsmp: Use a single DRIVER_VERSION for all hsmp modules platform/mellanox: mlxreg-dpu: Fix smatch warnings platform: mellanox: nvsw-sn2200: Fix .items in nvsw_sn2201_busbar_hotplug ...
2025-05-28Merge tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm updates from Dave Airlie: "As part of building up nova-core/nova-drm pieces we've brought in some rust abstractions through this tree, aux bus being the main one, with devres changes also in the driver-core tree. Along with the drm core abstractions and enough nova-core/nova-drm to use them. This is still all stub work under construction, to build the nova driver upstream. The other big NVIDIA related one is nouveau adds support for Hopper/Blackwell GPUs, this required a new GSP firmware update to 570.144, and a bunch of rework in order to support multiple fw interfaces. There is also the introduction of an asahi uapi header file as a precursor to getting the real driver in later, but to unblock userspace mesa packages while the driver is trapped behind rust enablement. Otherwise it's the usual mixture of stuff all over, amdgpu, i915/xe, and msm being the main ones, and some changes to vsprintf. new drivers: - bring in the asahi uapi header standalone - nova-drm: stub driver rust dependencies (for nova-core): - auxiliary - bus abstractions - driver registration - sample driver - devres changes from driver-core - revocable changes core: - add Apple fourcc modifiers - add virtio capset definitions - extend EXPORT_SYNC_FILE for timeline syncobjs - convert to devm_platform_ioremap_resource - refactor shmem helper page pinning - DP powerup/down link helpers - extended %p4cc in vsprintf.c to support fourcc prints - change vsprintf %p4cn to %p4chR, remove %p4cn - Add drm_file_err function - IN_FORMATS_ASYNC property - move sitronix from tiny to their own subdir rust: - add drm core infrastructure rust abstractions (device/driver, ioctl, file, gem) dma-buf: - adjust sg handling to not cache map on attach - allow setting dma-device for import - Add a helper to sort and deduplicate dma_fence arrays docs: - updated drm scheduler docs - fbdev todo update - fb rendering - actual brightness ttm: - fix delayed destroy resv object bridge: - add kunit tests - convert tc358775 to atomic - convert drivers to devm_drm_bridge_alloc - convert rk3066_hdmi to bridge driver scheduler: - add kunit tests panel: - refcount panels to improve lifetime handling - Powertip PH128800T004-ZZA01 - NLT NL13676BC25-03F, Tianma TM070JDHG34-00 - Himax HX8279/HX8279-D DDIC - Visionox G2647FB105 - Sitronix ST7571 - ZOTAC rotation quirk vkms: - allow attaching more displays i915: - xe3lpd display updates - vrr refactor - intel_display struct conversions - xe2hpd memory type identification - add link rate/count to i915_display_info - cleanup VGA plane handling - refactor HDCP GSC - fix SLPC wait boosting reference counting - add 20ms delay to engine reset - fix fence release on early probe errors xe: - SRIOV updates - BMG PCI ID update - support separate firmware for each GT - SVM fix, prelim SVM multi-device work - export fan speed - temp disable d3cold on BMG - backup VRAM in PM notifier instead of suspend/freeze - update xe_ttm_access_memory to use GPU for non-visible access - fix guc_info debugfs for VFs - use copy_from_user instead of __copy_from_user - append PCIe gen5 limitations to xe_firmware document amdgpu: - DSC cleanup - DC Scaling updates - Fused I2C-over-AUX updates - DMUB updates - Use drm_file_err in amdgpu - Enforce isolation updates - Use new dma_fence helpers - USERQ fixes - Documentation updates - SR-IOV updates - RAS updates - PSP 12 cleanups - GC 9.5 updates - SMU 13.x updates - VCN / JPEG SR-IOV updates amdkfd: - Update error messages for SDMA - Userptr updates - XNACK fixes radeon: - CIK doorbell cleanup nouveau: - add support for NVIDIA r570 GSP firmware - enable Hopper/Blackwell support nova-core: - fix task list - register definition infrastructure - move firmware into own rust module - register auxiliary device for nova-drm nova-drm: - initial driver skeleton msm: - GPU: - ACD (adaptive clock distribution) for X1-85 - drop fictional address_space_size - improve GMU HFI response time out robustness - fix crash when throttling during boot - DPU: - use single CTL path for flushing on DPU 5.x+ - improve SSPP allocation code for better sharing - Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550 - Added SAR2130P support - Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660 - DP: - switch to new audio helpers - better LTTPR handling - DSI: - Added support for SA8775P - Added SAR2130P support - HDMI: - Switched to use new helpers for ACR data - Fixed old standing issue of HPD not working in some cases amdxdna: - add dma-buf support - allow empty command submits renesas: - add dma-buf support - add zpos, alpha, blend support panthor: - fail properly for NO_MMAP bos - add SET_LABEL ioctl - debugfs BO dumping support imagination: - update DT bindings - support TI AM68 GPU hibmc: - improve interrupt handling and HPD support virtio: - add panic handler support rockchip: - add RK3588 support - add DP AUX bus panel support ivpu: - add heartbeat based hangcheck mediatek: - prepares support for MT8195/99 HDMIv2/DDCv2 anx7625: - improve HPD tegra: - speed up firmware loading * tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernel: (1627 commits) drm/nouveau/tegra: Fix error pointer vs NULL return in nvkm_device_tegra_resource_addr() drm/xe: Default auto_link_downgrade status to false drm/xe/guc: Make creation of SLPC debugfs files conditional drm/i915/display: Add check for alloc_ordered_workqueue() and alloc_workqueue() drm/i915/dp_mst: Work around Thunderbolt sink disconnect after SINK_COUNT_ESI read drm/i915/ptl: Use everywhere the correct DDI port clock select mask drm/nouveau/kms: add support for GB20x drm/dp: add option to disable zero sized address only transactions. drm/nouveau: add support for GB20x drm/nouveau/gsp: add hal for fifo.chan.doorbell_handle drm/nouveau: add support for GB10x drm/nouveau/gf100-: track chan progress with non-WFI semaphore release drm/nouveau/nv50-: separate CHANNEL_GPFIFO handling out from CHANNEL_DMA drm/nouveau: add helper functions for allocating pinned/cpu-mapped bos drm/nouveau: add support for GH100 drm/nouveau: improve handling of 64-bit BARs drm/nouveau/gv100-: switch to volta semaphore methods drm/nouveau/gsp: support deeper page tables in COPY_SERVER_RESERVED_PDES drm/nouveau/gsp: init client VMMs with NV0080_CTRL_DMA_SET_PAGE_DIRECTORY drm/nouveau/gsp: fetch level shift and PDE from BAR2 VMM ...
2025-05-27Merge tag 'gpio-updates-for-v6.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio updates from Bartosz Golaszewski: "We have three new drivers, some refactoring in the GPIO core, lots of various changes across many drivers, new configfs interface for the virtual gpio-aggregator module and DT-bindings updates. The treewide conversion of GPIO drivers to using the new value setter callbacks is ongoing with another round of GPIO drivers updated. You will also see these commits coming in from other subsystems as with the relevant changes merged into mainline last cycle, I've started converting GPIO providers located elsewhere than drivers/gpio/. GPIO core: - use more lock guards where applicable - refactor GPIO ACPI code and shrink it in the process by 8% - move GPIO ACPI quirks into a separate file - remove unneeded #ifdef - convert GPIO devres helpers to using devm_add_action() where applicable which shrinks and simplifies the code - refactor GPIO descriptor validation in GPIO consumer interfaces - don't allow setting values on input lines in the GPIO core which will take off the burden from GPIO drivers of checking this down the line - provide gpiod_is_equal() as a way of safely comparing two GPIO descriptors (the only current user is in regulator core) New drivers: - add the GPIO module for the max77759 multifunction device - add the GPIO driver for the VeriSilicon BLZP1600 GPIO controller - add the GPIO driver for the Spacemit K1 SoC Driver improvements: - convert more drivers to using the new GPIO line value setter callbacks - convert more drivers to making the irq_chip immutable as is recommended by the interrupt subsystem - extend build testing coverage by enabling more modules to be built with COMPILE_TEST=y - extend the gpio-aggregator module with a configfs interface that makes the setup easier for user-space than the existing driver-level sysfs attributes and also adds more advanced configuration features (such as referring to aggregated lines by their original names or modifying their names as exposed by the aggregated chip) - add a missing mutex_destroy() in gpio-imx-scu - add an OF polarity quirk for s5m8767 - allow building gpio-vf610 as a loadable module - make gpio-mxc not hardcode its GPIO base number with GPIO SYSFS interface disabled (another small step towards getting rid of the global GPIO numberspace) - add support for level-triggered interrupts to gpio-pca953x - don't double-check the ngpios property in gpio-ds4520 as GPIO core already does it - don't double-check the number of GPIOs in gpio-imx-scu as GPIO core already does it - remove unused callbacks from gpio-max3191x DT bindings: - add device-tree bindings for max77759, spacemit,k1 and blzp1600 (new drivers added this cycle) - document more properties for gpio-vf610 and gpio-tegra186 - document a new pca95xx variant - fix style of examples in several GPIO DT-binding documents Misc: - TODO list updates" * tag 'gpio-updates-for-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (123 commits) gpio: timberdale: select GPIOLIB_IRQCHIP gpio: lpc18xx: select GPIOLIB_IRQCHIP gpio: grgpio: select GPIOLIB_IRQCHIP gpio: bcm-kona: select GPIOLIB_IRQCHIP dt-bindings: gpio: vf610: add ngpios and gpio-reserved-ranges gpio: davinci: select GPIOLIB_IRQCHIP gpiolib-acpi: Update file references in the Documentation and MAINTAINERS gpiolib: acpi: Move quirks to a separate file gpiolib: acpi: Add acpi_gpio_need_run_edge_events_on_boot() getter gpiolib: acpi: Handle deferred list via new API gpiolib: acpi: Make sure we fill struct acpi_gpio_info gpiolib: acpi: Switch to use enum in acpi_gpio_in_ignore_list() gpiolib: acpi: Use temporary variable for struct acpi_gpio_info gpiolib: remove unneeded #ifdef gpio: mpc8xxx: select GPIOLIB_IRQCHIP gpio: pxa: select GPIOLIB_IRQCHIP gpio: pxa: Make irq_chip immutable gpio: timberdale: Make irq_chip immutable gpio: xgene-sb: Make irq_chip immutable gpio: davinci: Make irq_chip immutable ...
generated by cgit (git 2.34.1) at 2025-07-06 16:17:08 +0000