summaryrefslogtreecommitdiff
path: root/drivers/pwm/Kconfig
AgeCommit message (Collapse)Author
2025-05-14pwm: Tidyup PWM menu for RenesasKuninori Morimoto
Because current PWM Kconfig is sorting by symbol name, it looks strange ordering in menuconfig. => [ ] Renesas R-Car PWM support => [ ] Renesas TPU PWM support [ ] Rockchip PWM support => [ ] Renesas RZ/G2L General PWM Timer support => [ ] Renesas RZ/G2L MTU3a PWM Timer support Let's use common CONFIG_PWM_RENESAS_xxx symbol name for Renesas, and sort it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/877c2mxrrr.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2025-05-08pwm: Restore alphabetic ordering in Kconfig and MakefileUwe Kleine-König
The drivers are nearly ordered alphabetically by the symbol name. Fix the few outliers. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://lore.kernel.org/r/20250508081706.751209-2-u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2025-05-02pwm: add support for NXPs high-side switch MC33XS2410Dimitri Fedrau
The MC33XS2410 is a four channel high-side switch. Featuring advanced monitoring and control function, the device is operational from 3.0 V to 60 V. The device is controlled by SPI port for configuration. Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com> Link: https://lore.kernel.org/r/20250407-mc33xs2410-v9-2-57adcb56a6e4@liebherr.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2025-04-17pwm: Add support for RZ/G2L GPTBiju Das
RZ/G2L General PWM Timer (GPT) composed of 8 channels with 32-bit timer (GPT32E). It supports the following functions * 32 bits x 8 channels * Up-counting or down-counting (saw waves) or up/down-counting (triangle waves) for each counter. * Clock sources independently selectable for each channel * Two I/O pins per channel * Two output compare/input capture registers per channel * For the two output compare/input capture registers of each channel, four registers are provided as buffer registers and are capable of operating as comparison registers when buffering is not in use. * In output compare operation, buffer switching can be at crests or troughs, enabling the generation of laterally asymmetric PWM waveforms. * Registers for setting up frame cycles in each channel (with capability for generating interrupts at overflow or underflow) * Generation of dead times in PWM operation * Synchronous starting, stopping and clearing counters for arbitrary channels * Starting, stopping, clearing and up/down counters in response to input level comparison * Starting, clearing, stopping and up/down counters in response to a maximum of four external triggers * Output pin disable function by dead time error and detected short-circuits between output pins * A/D converter start triggers can be generated (GPT32E0 to GPT32E3) * Enables the noise filter for input capture and external trigger operation Add basic pwm support for RZ/G2L GPT driver by creating separate logical channels for each IOs. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20250226144531.176819-4-biju.das.jz@bp.renesas.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2025-04-14pwm: Add Loongson PWM controller supportBinbin Zhou
This commit adds a generic PWM framework driver for the PWM controller found on Loongson family chips. Acked-by: Huacai Chen <chenhuacai@loongson.cn> Co-developed-by: Juxin Gao <gaojuxin@loongson.cn> Signed-off-by: Juxin Gao <gaojuxin@loongson.cn> Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Link: https://lore.kernel.org/r/76050a903a8015422fb9261ad88c7d9cc2edbbd8.1743403075.git.zhoubinbin@loongson.cn Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2025-03-03pwm: stmpe: Allow to compile as a moduleUwe Kleine-König
pwm-stmpe is the only driver that cannot be built as a module. Add the necessary boilerplate to also make this driver modular. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://lore.kernel.org/r/20250215143723.636591-2-u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2025-02-15pwm: Strengthen dependency for PWM_SIFIVEUwe Kleine-König
Back when the sifive pwm driver was added there was no symbol for sifive SoCs yet. Today there is ARCH_SIFIVE however. Let PWM_SIFIVE depend on that to ensure the driver is only build for platforms where there is a chance that the hardware is available. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://lore.kernel.org/r/20250127105001.587610-2-u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2025-02-05pwm: sophgo: add driver for Sophgo SG2042 PWMChen Wang
Add a PWM driver for PWM controller in Sophgo SG2042 SoC. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Chen Wang <unicorn_wang@outlook.com> Link: https://lore.kernel.org/r/ae8ea1bf0bb0a09336cd8b7f627a994630524bba.1738737617.git.unicorn_wang@outlook.com [ukleinek: Drop unneeded reset_control_assert() from error path] Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-08-01pwm: adp5585: Add Analog Devices ADP5585 supportClark Wang
The ADP5585 is a 10/11 input/output port expander with a built in keypad matrix decoder, programmable logic, reset generator, and PWM generator. This driver supports the PWM function using the platform device registered by the core MFD driver. The driver is derived from an initial implementation from NXP, available in commit 113113742208 ("MLK-25922-1 pwm: adp5585: add adp5585 PWM support") in their BSP kernel tree. It has been extensively rewritten. Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Uwe Kleine-König <ukleinek@kernel.org> Link: https://lore.kernel.org/r/20240722121100.2855-5-laurent.pinchart@ideasonboard.com Signed-off-by: Lee Jones <lee@kernel.org>
2024-07-10pwm: Add GPIO PWM driverVincent Whitchurch
Add a software PWM which toggles a GPIO from a high-resolution timer. This will naturally not be as accurate or as efficient as a hardware PWM, but it is useful in some cases. I have for example used it for evaluating LED brightness handling (via leds-pwm) on a board where the LED was just hooked up to a GPIO, and for a simple verification of the timer frequency on another platform. Since high-resolution timers are used, sleeping GPIO chips are not supported and are rejected in the probe function. Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Co-developed-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Co-developed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andy@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Dhruva Gole <d-gole@ti.com> Link: https://lore.kernel.org/r/20240604-pwm-gpio-v7-2-6b67cf60db92@linaro.org Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10pwm: Add driver for AXI PWM generatorDrew Fustini
Add support for the Analog Devices AXI PWM Generator. This device is an FPGA-implemented peripheral used as PWM signal generator and can be interfaced with AXI4. The register map of this peripheral makes it possible to configure the period and duty cycle of the output signal. Link: https://analogdevicesinc.github.io/hdl/library/axi_pwm_gen/index.html Co-developed-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com> Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com> Co-developed-by: David Lechner <dlechner@baylibre.com> Signed-off-by: David Lechner <dlechner@baylibre.com> Signed-off-by: Drew Fustini <dfustini@baylibre.com> Acked-by: Nuno Sa <nuno.sa@analog.com> Co-developed-by: Trevor Gamblin <tgamblin@baylibre.com> Signed-off-by: Trevor Gamblin <tgamblin@baylibre.com> Link: https://lore.kernel.org/r/20240605203507.1934434-3-tgamblin@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-04-26pwm: Move contents of sysfs.c into core.cUwe Kleine-König
With the upcoming restructuring having all in a single file simplifies things a bit. The relevant and somewhat visible changes are: - Some dropped prototypes from include/linux/pwm.h that were only necessary that core.c has a declaration of the symbols defined in sysfs.c. The respective functions are static now. - The pwm class now also exists if CONFIG_SYSFS isn't enabled. Having CONFIG_SYSFS is not very relevant today, but even without it the class and device stuff still provides lifetime tracking. - Both files had an initcall, these are merged into a single one now. Instead of a big #ifdef block for CONFIG_DEBUG_FS, a single if (IS_ENABLED(CONFIG_DEBUG_FS)) is used now. This increases compile coverage a bit and is a tad nicer on the eyes. Link: https://lore.kernel.org/r/9e2d39a5280d7dda5bfc6682a8aef510148635b2.1710670958.git.u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2023-10-13pwm: dwc: split pci out of core driverBen Dooks
Moving towards adding non-pci support for the driver, move the pci parts out of the core into their own module. This is partly due to the module_driver() code only being allowed once in a module and also to avoid a number of #ifdef if we build a single file in a system without pci support. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230907161242.67190-2-ben.dooks@codethink.co.uk Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-10-13pwm: crc: Allow compilation as module and with COMPILE_TESTUwe Kleine-König
The driver compiles just fine as a module. The parent driver's Kconfig symbol already depends on X86 || COMPILE_TEST, so X86 can just be dropped from the dependencies allowing compilation on other platforms than x86. Link: https://lore.kernel.org/r/20230804142707.412137-3-u.kleine-koenig@pengutronix.de Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-10-06pwm: microchip-core: Convert SOC_MICROCHIP_POLARFIRE to ARCH_MICROCHIP_POLARFIREConor Dooley
As part of converting RISC-V SOC_FOO symbols to ARCH_FOO to match the use of such symbols on other architectures, convert the Microchip FPGA PWM driver to use the new symbol. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-08-18mfd: rz-mtu3: Link time dependenciesArnd Bergmann
The new set of drivers for RZ/G2L MTU3a tries to enable compile-testing the individual client drivers even when the MFD portion is disabled but gets it wrong, causing a link failure when the core is in a loadable module but the other drivers are built-in: x86_64-linux-ld: drivers/pwm/pwm-rz-mtu3.o: in function `rz_mtu3_pwm_apply': pwm-rz-mtu3.c:(.text+0x4bf): undefined reference to `rz_mtu3_8bit_ch_write' x86_64-linux-ld: pwm-rz-mtu3.c:(.text+0x509): undefined reference to `rz_mtu3_disable' arm-linux-gnueabi-ld: drivers/counter/rz-mtu3-cnt.o: in function `rz_mtu3_cascade_counts_enable_get': rz-mtu3-cnt.c:(.text+0xbec): undefined reference to `rz_mtu3_shared_reg_read' It seems better not to add the extra complexity here but instead just use a normal hard dependency, so remove the #else portion in the header along with the "|| COMPILE_TEST". This could also be fixed by having slightly more elaborate Kconfig dependencies or using the cursed 'IS_REACHABLE()' helper, but in practice it's already possible to compile-test all these drivers by enabling the mtd portion. Fixes: 254d3a727421c ("pwm: Add Renesas RZ/G2L MTU3a PWM driver") Fixes: 0be8907359df4 ("counter: Add Renesas RZ/G2L MTU3a counter driver") Fixes: 654c293e1687b ("mfd: Add Renesas RZ/G2L MTU3a core driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thierry Reding <thierry.reding@gmail.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230719090430.1925182-1-arnd@kernel.org Signed-off-by: Lee Jones <lee@kernel.org>
2023-06-23pwm: Add Renesas RZ/G2L MTU3a PWM driverBiju Das
The RZ/G2L Multi-Function Timer Pulse Unit 3 (a.k.a MTU3a) uses one counter and two match components to configure duty_cycle and period to generate PWM output waveform. Add basic support for RZ/G2L MTU3a PWM driver by creating separate PWM channels for each IOs. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-06-23pwm: add microchip soft ip corePWM driverConor Dooley
Add a driver that supports the Microchip FPGA "soft" PWM IP core. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-04-06pwm: Add Apple PWM controllerSasha Finkelstein
Adds the Apple PWM controller driver. Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com> Acked-by: Sven Peter <sven@svenpeter.dev> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2022-12-06pwm: pxa: Enable for MMP platformDoug Brown
The PXA168, which is part of the MMP platform, also uses this driver. Signed-off-by: Doug Brown <doug@schmorgal.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221113233639.24244-7-doug@schmorgal.com Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2022-11-29pwm: jz4740: Depend on MACH_INGENIC instead of MIPSPaul Cercueil
The MACH_INGENIC Kconfig option will be selected when building a kernel targeting Ingenic SoCs, but also when compiling a generic MIPS kernel that happens to support Ingenic SoCs. Therefore, if MACH_INGENIC is not set, we know that we're not even trying to build a generic kernel that supports these SoCs, and we can hide the options to compile the SoC-specific drivers. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2022-11-29pwm: jz4740: Force dependency on Device TreePaul Cercueil
Ingenic SoCs all require CONFIG_OF, so there is no case where we want to use this driver without CONFIG_OF. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2022-07-29pwm: Add clock based PWM output driverNikita Travkin
Some systems have clocks exposed to external devices. If the clock controller supports duty-cycle configuration, such clocks can be used as pwm outputs. In fact PWM and CLK subsystems are interfaced with in a similar way and an "opposite" driver already exists (clk-pwm). Add a driver that would enable pwm devices to be used via clk subsystem. Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Nikita Travkin <nikita@trvn.ru> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2022-04-22pwm: sunplus-pwm: Add Sunplus SoC SP7021 PWM DriverHammer Hsieh
Add Sunplus SoC SP7021 PWM Driver Signed-off-by: Hammer Hsieh <hammerh0314@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2022-04-22pwm: Add support for Xilinx AXI TimerSean Anderson
This adds PWM support for Xilinx LogiCORE IP AXI soft timers commonly found on Xilinx FPGAs. At the moment clock control is very basic: we just enable the clock during probe and pin the frequency. In the future, someone could add support for disabling the clock when not in use. Some common code has been specially demarcated. While currently only used by the PWM driver, it is anticipated that it may be split off in the future to be used by the timer driver as well. This driver was written with reference to Xilinx DS764 for v1.03.a [1]. [1] https://www.xilinx.com/support/documentation/ip_documentation/axi_timer/v1_03_a/axi_timer_ds764.pdf Signed-off-by: Sean Anderson <sean.anderson@seco.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-11-05pwm: samsung: Describe driver in KconfigKrzysztof Kozlowski
Describe better which driver applies to which SoC, to make configuring kernel for Samsung SoC easier. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-09-02pwm: keembay: Improve compile coverage by allowing to enable on !ARM64Uwe Kleine-König
There are no arm64 specific constructs in this driver and it compiles just fine with ARCH=arm. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-09-02pwm: jz4740: Improve compile coverage by allowing to enable on !MIPSUwe Kleine-König
There are no mips specific constructs in this driver and it compiles just fine with ARCH=arm. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-05-05Merge tag 'pwm/for-5.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "This adds support for the PWM controller found on Toshiba Visconti SoCs and converts a couple of drivers to the atomic API. There's also a bunch of cleanups and minor fixes across the board" * tag 'pwm/for-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (35 commits) pwm: Reword docs about pwm_apply_state() pwm: atmel: Improve duty cycle calculation in .apply() pwm: atmel: Fix duty cycle calculation in .get_state() pwm: visconti: Add Toshiba Visconti SoC PWM support dt-bindings: pwm: Add bindings for Toshiba Visconti PWM Controller arm64: dts: rockchip: Remove clock-names from PWM nodes ARM: dts: rockchip: Remove clock-names from PWM nodes dt-bindings: pwm: rockchip: Add more compatible strings dt-bindings: pwm: Convert pwm-rockchip.txt to YAML pwm: mediatek: Remove unused function pwm: pca9685: Improve runtime PM behavior pwm: pca9685: Support hardware readout pwm: pca9685: Switch to atomic API pwm: lpss: Don't modify HW state in .remove callback pwm: sti: Free resources only after pwmchip_remove() pwm: sti: Don't modify HW state in .remove callback pwm: lpc3200: Don't modify HW state in .remove callback pwm: lpc18xx-sct: Free resources only after pwmchip_remove() pwm: bcm-kona: Don't modify HW state in .remove callback pwm: bcm2835: Free resources only after pwmchip_remove() ...
2021-04-28Merge tag 'mfd-next-5.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Core Framework: - Add support for Software Nodes to MFD Core - Remove support for Device Properties from MFD Core - Use standard APIs in MFD Core New Drivers: - Add support for ROHM BD9576MUF and BD9573MUF PMICs - Add support for Netronix Embedded Controller, PWM and RTC - Add support for Actions Semi ATC260x PMICs and OnKey New Device Support: - Add support for DG1 PCIe Graphics Card to Intel PMT - Add support for ROHM BD71815 PMIC to ROHM BD71828 - Add support for Tolino Shine 2 HD to Netronix Embedded Controller - Add support for AX10 BMC Secure Updates to Intel M10 BMC Removed Device Support: - Remove Arizona Extcon support from MFD - Remove ST-E AB8500 Power Supply code from MFD - Remove AB3100 altogether New Functionality: - Add support for SMBus and I2C modes to Dialog DA9063 - Switch to using Software Nodes in Intel (various) New/converted Device Tree bindings: - rohm bd71815-pmic, rohm bd9576-pmic, netronix ntxec, actions atc260x, ricoh rn5t618, qcom pm8xxx - Fix-ups: - Fix error handling/path; intel_pmt - Simplify code; rohm-bd718x7, ab8500-core, intel-m10-bmc - Trivial clean-ups (reordering, spelling); rohm-generic, rn5t618, max8997 - Use correct data-type; db8500-prcmu - Remove superfluous code; lp87565, intel_quark_i2c_gpi, lpc_sch, twl - Use generic APIs/defines; lm3533-core, intel_quark_i2c_gpio - Regmap related fix-ups; intel-m10-bmc, sec-core - Reorder resource freeing during remove; intel_quark_i2c_gpio - Make table indexing more robust; intel_quark_i2c_gpio - Fix reference imbalances; arizona-irq - Staticify and (un)constify things; arizona-spi, stmpe, ene-kb3930, intel-lpss-acpi, intel-lpss-pci, atc260x-i2c, intel_quark_i2c_gpio Bug Fixes: - Fix incorrect (register) values; intel-m10-bmc - Kconfig related fixes; ABX500_CORE - Do not clear the Auto Reload Register; stm32-timers" * tag 'mfd-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (84 commits) mfd: intel-m10-bmc: Add support for MAX10 BMC Secure Updates Revert "mfd: max8997: Add of_compatible to Extcon and Charger mfd_cell" mfd: twl: Remove unused inline function twl4030charger_usb_en() dt-bindings: mfd: Convert pm8xxx bindings to yaml dt-bindings: mfd: Add compatible for pmk8350 rtc i2c: designware: Get rid of legacy platform data mfd: intel_quark_i2c_gpio: Convert I²C to use software nodes mfd: lpc_sch: Partially revert "Add support for Intel Quark X1000" mfd: arizona: Fix rumtime PM imbalance on error mfd: max8997: Replace 8998 with 8997 mfd: core: Use acpi_find_child_device() for child devices lookup mfd: intel_quark_i2c_gpio: Don't play dirty trick with const mfd: intel_quark_i2c_gpio: Enable MSI interrupt mfd: intel_quark_i2c_gpio: Reuse BAR definitions for MFD cell indexing mfd: ntxec: Support for EC in Tolino Shine 2 HD mfd: stm32-timers: Avoid clearing auto reload register mfd: intel_quark_i2c_gpio: Replace I²C speeds with descriptive definitions mfd: intel_quark_i2c_gpio: Remove unused struct device member mfd: intel_quark_i2c_gpio: Unregister resources in reversed order mfd: Kconfig: ABX500_CORE should depend on ARCH_U8500 ...
2021-04-23pwm: visconti: Add Toshiba Visconti SoC PWM supportNobuhiro Iwamatsu
Add driver for the PWM controller on Toshiba Visconti ARM SoC. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> [thierry.reding@gmail.com: fix up a couple of checkpatch warnings] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-03-22pwm: Add Raspberry Pi Firmware based PWM busNicolas Saenz Julienne
Adds support to control the PWM bus available in official Raspberry Pi PoE HAT. Only RPi's co-processor has access to it, so commands have to be sent through RPi's firmware mailbox interface. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Thierry Reding <thierry.reding@gmail.com>
2021-03-10pwm: ntxec: Add driver for PWM function in Netronix ECJonathan Neuschäfer
The Netronix EC provides a PWM output which is used for the backlight on some ebook readers. This patches adds a driver for the PWM output. The .get_state callback is not implemented, because the PWM state can't be read back from the hardware. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-01-20pwm: Remove ZTE ZX driverArnd Bergmann
The ZTE ZX platform is getting removed, so this driver is no longer needed. Cc: Jun Nie <jun.nie@linaro.org> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-12-17pwm: lpss: Make compilable with COMPILE_TESTUwe Kleine-König
All used ACPI functions have dummy implementations, and there is no hard dependency on x86. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-12-17pwm: Fix dependencies on HAS_IOMEMUwe Kleine-König
Drivers making use of IO remapping must depend on HAS_IOMEM. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-12-17pwm: Add PWM fan controller driver for LGM SoCRahul Tanwar
Intel Lightning Mountain(LGM) SoC contains a PWM fan controller. This PWM controller does not have any other consumer, it is a dedicated PWM controller for fan attached to the system. Add driver for this PWM fan controller. Signed-off-by: Rahul Tanwar <rahul.tanwar@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-12-17pwm: Add DesignWare PWM Controller DriverJarkko Nikula
Introduce driver for Synopsys DesignWare PWM Controller used on Intel Elkhart Lake. Initial implementation is done by Felipe Balbi while he was working at Intel with later changes from Raymond Tan and me. Co-developed-by: Felipe Balbi (Intel) <balbi@kernel.org> Signed-off-by: Felipe Balbi (Intel) <balbi@kernel.org> Co-developed-by: Raymond Tan <raymond.tan@intel.com> Signed-off-by: Raymond Tan <raymond.tan@intel.com> Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-12-17pwm: Add PWM driver for Intel Keem BayVijayakannan Ayyathurai
The Intel Keem Bay SoC requires PWM support. Add the pwm-keembay driver to enable this. Signed-off-by: Lai, Poey Seng <poey.seng.lai@intel.com> Co-developed-by: Vineetha G. Jaya Kumaran <vineetha.g.jaya.kumaran@intel.com> Signed-off-by: Vineetha G. Jaya Kumaran <vineetha.g.jaya.kumaran@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Co-developed-by: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com> Signed-off-by: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-12-17pwm: atmel-tcb: Switch to new bindingAlexandre Belloni
The PWM is now a subnode of the used TCB. This is cleaner and it mainly allows to stop wasting TCB channels when only 2 or 4 PWMs are used. This also removes the atmel_tclib dependency Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-pwm@vger.kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-10-24Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM SoC platform updates from Olof Johansson: "SoC changes, a substantial part of this is cleanup of some of the older platforms that used to have a bunch of board files. In particular: - Remove non-DT i.MX platforms that haven't seen activity in years, it's time to remove them. - A bunch of cleanup and removal of platform data for TI/OMAP platforms, moving over to genpd for power/reset control (yay!) - Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them closer to multiplatform support (not quite there yet, but getting close). There are a few other changes too, smaller fixlets, etc. For new platform support, the primary ones are: - New SoC: Hisilicon SD5203, ARM926EJ-S platform. - Cpufreq support for i.MX7ULP" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits) ARM: mstar: Select MStar intc ARM: stm32: Replace HTTP links with HTTPS ones ARM: debug: add UART early console support for SD5203 ARM: hisi: add support for SD5203 SoC ARM: omap3: enable off mode automatically clk: imx: imx35: Remove mx35_clocks_init() clk: imx: imx31: Remove mx31_clocks_init() clk: imx: imx27: Remove mx27_clocks_init() ARM: imx: Remove unused definitions ARM: imx35: Retrieve the IIM base address from devicetree ARM: imx3: Retrieve the AVIC base address from devicetree ARM: imx3: Retrieve the CCM base address from devicetree ARM: imx31: Retrieve the IIM base address from devicetree ARM: imx27: Retrieve the CCM base address from devicetree ARM: imx27: Retrieve the SYSCTRL base address from devicetree ARM: s3c64xx: bring back notes from removed debug-macro.S ARM: s3c24xx: fix Wunused-variable warning on !MMU ARM: samsung: fix PM debug build with DEBUG_LL but !MMU MAINTAINERS: mark linux-samsung-soc list non-moderated ARM: imx: Remove remnant board file support pieces ...
2020-09-17pwm: Add support for sl28cpld PWM controllerMichael Walle
Add support for the PWM controller of the sl28cpld board management controller. This is part of a multi-function device driver. The controller has one PWM channel and can just generate four distinct frequencies. Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Thierry Reding <thierry.reding@gmail.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-08-19ARM: s5pv210: don't imply CONFIG_PLAT_SAMSUNGArnd Bergmann
The plat-samsung directory and mach-s5pv210 can be build completely independently, so split the two Kconfig symbols CONFIG_PLAT_SAMSUNG and CONFIG_ARCH_S5PV210. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20200806182059.2431-18-krzk@kernel.org Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-07-01pwm: remove pwm-puv3 driverMike Rapoport
The unicore32 port is removed from the kernel. There is no point to keep stale PWM driver for this architecture. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Guenter Roeck <linux@roeck-us.net>
2020-06-02pwm: jz4740: Drop dependency on MACH_INGENICPaul Cercueil
Depending on MACH_INGENIC prevent us from creating a generic kernel that works on more than one MIPS board. Instead, we just depend on MIPS being set. Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-04-14pwm: Add support for Azoteq IQS620A PWM generatorJeff LaBundy
This patch adds support for the Azoteq IQS620A, capable of generating a 1-kHz PWM output with duty cycle between ~0.4% and 100% (inclusive). Signed-off-by: Jeff LaBundy <jeff@labundy.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-03-30pwm: jz4740: Obtain regmap from parent nodePaul Cercueil
The TCU registers are shared between a handful of drivers, accessing them through the same regmap. While this driver is devicetree-compatible, it is never (as of now) probed from devicetree, so this change does not introduce a ABI problem with current devicetree files. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Tested-by: Mathieu Malaterre <malat@debian.org> Tested-by: Artur Rojek <contact@artur-rojek.eu> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-03-30pwm: jz4740: Use clocks from TCU driverPaul Cercueil
The ingenic-timer "TCU" driver provides us with clocks, that can be (un)gated, reparented or reclocked from devicetree, instead of having these settings hardcoded in this driver. The new code now uses a clk pointer per PWM (instead of a clk per pwm-chip before). So the pointer is stored in per-pwm data now. The calls to arch-specific timer code is replaced with standard clock API calls to start and stop each channel's clock. While this driver is devicetree-compatible, it is never (as of now) probed from devicetree, so this change does not introduce a ABI problem with current devicetree files. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Tested-by: Mathieu Malaterre <malat@debian.org> Tested-by: Artur Rojek <contact@artur-rojek.eu> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-03-30pwm: Enable compile testing for some of driversKrzysztof Kozlowski
Some of the PWM drivers can be compile tested to increase build coverage. The Meson PWM driver requires COMMON_CLK dependency. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> # For Broadcoam Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> # For Meson Acked-by: Claudiu Beznea <claudiu.beznea@microchip.com> # For Atmel Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-03-30pwm: Implement some checks for lowlevel driversUwe Kleine-König
There are some expectations which the callbacks provided by lowlevel drivers should fulfill. Implement checks that help driver authors to get these semantics right. As these have some overhead the checks can be disabled using a Kconfig setting. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
generated by cgit (git 2.34.1) at 2025-07-15 21:47:05 +0000