| Age | Commit message (Collapse) | Author |
|---|
|
The large folio + buffer head noref migration scenarios are
being naughty and blocking while holding a spinlock.
As a consequence of the pagecache lookup path taking the
folio lock this serializes against migration paths, so
they can wait for each other. For the private_lock
atomic case, a new BH_Migrate flag is introduced which
enables the lookup to bail.
This allows the critical region of the private_lock on
the migration path to be reduced to the way it was before
ebdf4de5642fb6 ("mm: migrate: fix reference check race
between __find_get_block() and migration"), that is covering
the count checks.
The scope is always noref migration.
Reported-by: kernel test robot <oliver.sang@intel.com>
Reported-by: syzbot+f3c6fda1297c748a7076@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/oe-lkp/202503101536.27099c77-lkp@intel.com
Fixes: 3c20917120ce61 ("block/bdev: enable large folio support for large logical block sizes")
Reviewed-by: Jan Kara <jack@suse.cz>
Co-developed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://kdevops.org/ext4/v6.15-rc2.html # [0]
Link: https://lore.kernel.org/all/aAAEvcrmREWa1SKF@bombadil.infradead.org/ # [1]
Link: https://lore.kernel.org/20250418015921.132400-8-dave@stgolabs.net
Tested-by: kdevops@lists.linux.dev # [0] [1]
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Enable ext4_free_blocks() to use it, which has a cond_resched to begin
with. Convert to the new nonatomic flavor to benefit from potential
performance benefits and adapt in the future vs migration such that
semantics are kept.
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://kdevops.org/ext4/v6.15-rc2.html # [0]
Link: https://lore.kernel.org/all/aAAEvcrmREWa1SKF@bombadil.infradead.org/ # [1]
Link: https://lore.kernel.org/20250418015921.132400-7-dave@stgolabs.net
Tested-by: kdevops@lists.linux.dev
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"A few more miscellaneous ext4 bug fixes and cleanups including some
syzbot failures and fixing a stale file handing refeencing an inode
previously used as a regular file, but which has been deleted and
reused as an ea_inode would result in ext4 erroneously considering
this a case of fs corruption"
* tag 'ext4_for_linus-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix off-by-one error in do_split
ext4: make block validity check resistent to sb bh corruption
ext4: avoid -Wflex-array-member-not-at-end warning
Documentation: ext4: Add fields to ext4_super_block documentation
ext4: don't treat fhandle lookup of ea_inode as FS corruption
|
|
Syzkaller detected a use-after-free issue in ext4_insert_dentry that was
caused by out-of-bounds access due to incorrect splitting in do_split.
BUG: KASAN: use-after-free in ext4_insert_dentry+0x36a/0x6d0 fs/ext4/namei.c:2109
Write of size 251 at addr ffff888074572f14 by task syz-executor335/5847
CPU: 0 UID: 0 PID: 5847 Comm: syz-executor335 Not tainted 6.12.0-rc6-syzkaller-00318-ga9cda7c0ffed #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/30/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x169/0x550 mm/kasan/report.c:488
kasan_report+0x143/0x180 mm/kasan/report.c:601
kasan_check_range+0x282/0x290 mm/kasan/generic.c:189
__asan_memcpy+0x40/0x70 mm/kasan/shadow.c:106
ext4_insert_dentry+0x36a/0x6d0 fs/ext4/namei.c:2109
add_dirent_to_buf+0x3d9/0x750 fs/ext4/namei.c:2154
make_indexed_dir+0xf98/0x1600 fs/ext4/namei.c:2351
ext4_add_entry+0x222a/0x25d0 fs/ext4/namei.c:2455
ext4_add_nondir+0x8d/0x290 fs/ext4/namei.c:2796
ext4_symlink+0x920/0xb50 fs/ext4/namei.c:3431
vfs_symlink+0x137/0x2e0 fs/namei.c:4615
do_symlinkat+0x222/0x3a0 fs/namei.c:4641
__do_sys_symlink fs/namei.c:4662 [inline]
__se_sys_symlink fs/namei.c:4660 [inline]
__x64_sys_symlink+0x7a/0x90 fs/namei.c:4660
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
The following loop is located right above 'if' statement.
for (i = count-1; i >= 0; i--) {
/* is more than half of this entry in 2nd half of the block? */
if (size + map[i].size/2 > blocksize/2)
break;
size += map[i].size;
move++;
}
'i' in this case could go down to -1, in which case sum of active entries
wouldn't exceed half the block size, but previous behaviour would also do
split in half if sum would exceed at the very last block, which in case of
having too many long name files in a single block could lead to
out-of-bounds access and following use-after-free.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Cc: stable@vger.kernel.org
Fixes: 5872331b3d91 ("ext4: fix potential negative array index in do_split()")
Signed-off-by: Artem Sadovnikov <a.sadovnikov@ispras.ru>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250404082804.2567-3-a.sadovnikov@ispras.ru
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Block validity checks need to be skipped in case they are called
for journal blocks since they are part of system's protected
zone.
Currently, this is done by checking inode->ino against
sbi->s_es->s_journal_inum, which is a direct read from the ext4 sb
buffer head. If someone modifies this underneath us then the
s_journal_inum field might get corrupted. To prevent against this,
change the check to directly compare the inode with journal->j_inode.
**Slight change in behavior**: During journal init path,
check_block_validity etc might be called for journal inode when
sbi->s_journal is not set yet. In this case we now proceed with
ext4_inode_block_valid() instead of returning early. Since systems zones
have not been set yet, it is okay to proceed so we can perform basic
checks on the blocks.
Suggested-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/0c06bc9ebfcd6ccfed84a36e79147bf45ff5adc1.1743142920.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Use the `DEFINE_RAW_FLEX()` helper for an on-stack definition of
a flexible structure where the size of the flexible-array member
is known at compile-time, and refactor the rest of the code,
accordingly.
So, with these changes, fix the following warning:
fs/ext4/mballoc.c:3041:40: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/Z-SF97N3AxcIMlSi@kspp
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
A file handle that userspace provides to open_by_handle_at() can
legitimately contain an outdated inode number that has since been reused
for another purpose - that's why the file handle also contains a generation
number.
But if the inode number has been reused for an ea_inode, check_igot_inode()
will notice, __ext4_iget() will go through ext4_error_inode(), and if the
inode was newly created, it will also be marked as bad by iget_failed().
This all happens before the point where the inode generation is checked.
ext4_error_inode() is supposed to only be used on filesystem corruption; it
should not be used when userspace just got unlucky with a stale file
handle. So when this happens, let __ext4_iget() just return an error.
Fixes: b3e6bcb94590 ("ext4: add EA_INODE checking to ext4_iget()")
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20241129-ext4-ignore-ea-fhandle-v1-1-e532c0d1cee0@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- The series "Enable strict percpu address space checks" from Uros
Bizjak uses x86 named address space qualifiers to provide
compile-time checking of percpu area accesses.
This has caused a small amount of fallout - two or three issues were
reported. In all cases the calling code was found to be incorrect.
- The series "Some cleanup for memcg" from Chen Ridong implements some
relatively monir cleanups for the memcontrol code.
- The series "mm: fixes for device-exclusive entries (hmm)" from David
Hildenbrand fixes a boatload of issues which David found then using
device-exclusive PTE entries when THP is enabled. More work is
needed, but this makes thins better - our own HMM selftests now
succeed.
- The series "mm: zswap: remove z3fold and zbud" from Yosry Ahmed
remove the z3fold and zbud implementations. They have been deprecated
for half a year and nobody has complained.
- The series "mm: further simplify VMA merge operation" from Lorenzo
Stoakes implements numerous simplifications in this area. No runtime
effects are anticipated.
- The series "mm/madvise: remove redundant mmap_lock operations from
process_madvise()" from SeongJae Park rationalizes the locking in the
madvise() implementation. Performance gains of 20-25% were observed
in one MADV_DONTNEED microbenchmark.
- The series "Tiny cleanup and improvements about SWAP code" from
Baoquan He contains a number of touchups to issues which Baoquan
noticed when working on the swap code.
- The series "mm: kmemleak: Usability improvements" from Catalin
Marinas implements a couple of improvements to the kmemleak
user-visible output.
- The series "mm/damon/paddr: fix large folios access and schemes
handling" from Usama Arif provides a couple of fixes for DAMON's
handling of large folios.
- The series "mm/damon/core: fix wrong and/or useless damos_walk()
behaviors" from SeongJae Park fixes a few issues with the accuracy of
kdamond's walking of DAMON regions.
- The series "expose mapping wrprotect, fix fb_defio use" from Lorenzo
Stoakes changes the interaction between framebuffer deferred-io and
core MM. No functional changes are anticipated - this is preparatory
work for the future removal of page structure fields.
- The series "mm/damon: add support for hugepage_size DAMOS filter"
from Usama Arif adds a DAMOS filter which permits the filtering by
huge page sizes.
- The series "mm: permit guard regions for file-backed/shmem mappings"
from Lorenzo Stoakes extends the guard region feature from its
present "anon mappings only" state. The feature now covers shmem and
file-backed mappings.
- The series "mm: batched unmap lazyfree large folios during
reclamation" from Barry Song cleans up and speeds up the unmapping
for pte-mapped large folios.
- The series "reimplement per-vma lock as a refcount" from Suren
Baghdasaryan puts the vm_lock back into the vma. Our reasons for
pulling it out were largely bogus and that change made the code more
messy. This patchset provides small (0-10%) improvements on one
microbenchmark.
- The series "Docs/mm/damon: misc DAMOS filters documentation fixes and
improves" from SeongJae Park does some maintenance work on the DAMON
docs.
- The series "hugetlb/CMA improvements for large systems" from Frank
van der Linden addresses a pile of issues which have been observed
when using CMA on large machines.
- The series "mm/damon: introduce DAMOS filter type for unmapped pages"
from SeongJae Park enables users of DMAON/DAMOS to filter my the
page's mapped/unmapped status.
- The series "zsmalloc/zram: there be preemption" from Sergey
Senozhatsky teaches zram to run its compression and decompression
operations preemptibly.
- The series "selftests/mm: Some cleanups from trying to run them" from
Brendan Jackman fixes a pile of unrelated issues which Brendan
encountered while runnimg our selftests.
- The series "fs/proc/task_mmu: add guard region bit to pagemap" from
Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to
determine whether a particular page is a guard page.
- The series "mm, swap: remove swap slot cache" from Kairui Song
removes the swap slot cache from the allocation path - it simply
wasn't being effective.
- The series "mm: cleanups for device-exclusive entries (hmm)" from
David Hildenbrand implements a number of unrelated cleanups in this
code.
- The series "mm: Rework generic PTDUMP configs" from Anshuman Khandual
implements a number of preparatoty cleanups to the GENERIC_PTDUMP
Kconfig logic.
- The series "mm/damon: auto-tune aggregation interval" from SeongJae
Park implements a feedback-driven automatic tuning feature for
DAMON's aggregation interval tuning.
- The series "Fix lazy mmu mode" from Ryan Roberts fixes some issues in
powerpc, sparc and x86 lazy MMU implementations. Ryan did this in
preparation for implementing lazy mmu mode for arm64 to optimize
vmalloc.
- The series "mm/page_alloc: Some clarifications for migratetype
fallback" from Brendan Jackman reworks some commentary to make the
code easier to follow.
- The series "page_counter cleanup and size reduction" from Shakeel
Butt cleans up the page_counter code and fixes a size increase which
we accidentally added late last year.
- The series "Add a command line option that enables control of how
many threads should be used to allocate huge pages" from Thomas
Prescher does that. It allows the careful operator to significantly
reduce boot time by tuning the parallalization of huge page
initialization.
- The series "Fix calculations in trace_balance_dirty_pages() for cgwb"
from Tang Yizhou fixes the tracing output from the dirty page
balancing code.
- The series "mm/damon: make allow filters after reject filters useful
and intuitive" from SeongJae Park improves the handling of allow and
reject filters. Behaviour is made more consistent and the documention
is updated accordingly.
- The series "Switch zswap to object read/write APIs" from Yosry Ahmed
updates zswap to the new object read/write APIs and thus permits the
removal of some legacy code from zpool and zsmalloc.
- The series "Some trivial cleanups for shmem" from Baolin Wang does as
it claims.
- The series "fs/dax: Fix ZONE_DEVICE page reference counts" from
Alistair Popple regularizes the weird ZONE_DEVICE page refcount
handling in DAX, permittig the removal of a number of special-case
checks.
- The series "refactor mremap and fix bug" from Lorenzo Stoakes is a
preparatoty refactoring and cleanup of the mremap() code.
- The series "mm: MM owner tracking for large folios (!hugetlb) +
CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in
which we determine whether a large folio is known to be mapped
exclusively into a single MM.
- The series "mm/damon: add sysfs dirs for managing DAMOS filters based
on handling layers" from SeongJae Park adds a couple of new sysfs
directories to ease the management of DAMON/DAMOS filters.
- The series "arch, mm: reduce code duplication in mem_init()" from
Mike Rapoport consolidates many per-arch implementations of
mem_init() into code generic code, where that is practical.
- The series "mm/damon/sysfs: commit parameters online via
damon_call()" from SeongJae Park continues the cleaning up of sysfs
access to DAMON internal data.
- The series "mm: page_ext: Introduce new iteration API" from Luiz
Capitulino reworks the page_ext initialization to fix a boot-time
crash which was observed with an unusual combination of compile and
cmdline options.
- The series "Buddy allocator like (or non-uniform) folio split" from
Zi Yan reworks the code to split a folio into smaller folios. The
main benefit is lessened memory consumption: fewer post-split folios
are generated.
- The series "Minimize xa_node allocation during xarry split" from Zi
Yan reduces the number of xarray xa_nodes which are generated during
an xarray split.
- The series "drivers/base/memory: Two cleanups" from Gavin Shan
performs some maintenance work on the drivers/base/memory code.
- The series "Add tracepoints for lowmem reserves, watermarks and
totalreserve_pages" from Martin Liu adds some more tracepoints to the
page allocator code.
- The series "mm/madvise: cleanup requests validations and
classifications" from SeongJae Park cleans up some warts which
SeongJae observed during his earlier madvise work.
- The series "mm/hwpoison: Fix regressions in memory failure handling"
from Shuai Xue addresses two quite serious regressions which Shuai
has observed in the memory-failure implementation.
- The series "mm: reliable huge page allocator" from Johannes Weiner
makes huge page allocations cheaper and more reliable by reducing
fragmentation.
- The series "Minor memcg cleanups & prep for memdescs" from Matthew
Wilcox is preparatory work for the future implementation of memdescs.
- The series "track memory used by balloon drivers" from Nico Pache
introduces a way to track memory used by our various balloon drivers.
- The series "mm/damon: introduce DAMOS filter type for active pages"
from Nhat Pham permits users to filter for active/inactive pages,
separately for file and anon pages.
- The series "Adding Proactive Memory Reclaim Statistics" from Hao Jia
separates the proactive reclaim statistics from the direct reclaim
statistics.
- The series "mm/vmscan: don't try to reclaim hwpoison folio" from
Jinjiang Tu fixes our handling of hwpoisoned pages within the reclaim
code.
* tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (431 commits)
mm/page_alloc: remove unnecessary __maybe_unused in order_to_pindex()
x86/mm: restore early initialization of high_memory for 32-bits
mm/vmscan: don't try to reclaim hwpoison folio
mm/hwpoison: introduce folio_contain_hwpoisoned_page() helper
cgroup: docs: add pswpin and pswpout items in cgroup v2 doc
mm: vmscan: split proactive reclaim statistics from direct reclaim statistics
selftests/mm: speed up split_huge_page_test
selftests/mm: uffd-unit-tests support for hugepages > 2M
docs/mm/damon/design: document active DAMOS filter type
mm/damon: implement a new DAMOS filter type for active pages
fs/dax: don't disassociate zero page entries
MM documentation: add "Unaccepted" meminfo entry
selftests/mm: add commentary about 9pfs bugs
fork: use __vmalloc_node() for stack allocation
docs/mm: Physical Memory: Populate the "Zones" section
xen: balloon: update the NR_BALLOON_PAGES state
hv_balloon: update the NR_BALLOON_PAGES state
balloon_compaction: update the NR_BALLOON_PAGES state
meminfo: add a per node counter for balloon drivers
mm: remove references to folio in __memcg_kmem_uncharge_page()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Ext4 bug fixes and cleanups, including:
- hardening against maliciously fuzzed file systems
- backwards compatibility for the brief period when we attempted to
ignore zero-width characters
- avoid potentially BUG'ing if there is a file system corruption
found during the file system unmount
- fix free space reporting by statfs when project quotas are enabled
and the free space is less than the remaining project quota
Also improve performance when replaying a journal with a very large
number of revoke records (applicable for Lustre volumes)"
* tag 'ext4-for_linus-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (71 commits)
ext4: fix OOB read when checking dotdot dir
ext4: on a remount, only log the ro or r/w state when it has changed
ext4: correct the error handle in ext4_fallocate()
ext4: Make sb update interval tunable
ext4: avoid journaling sb update on error if journal is destroying
ext4: define ext4_journal_destroy wrapper
ext4: hash: simplify kzalloc(n * 1, ...) to kzalloc(n, ...)
jbd2: add a missing data flush during file and fs synchronization
ext4: don't over-report free space or inodes in statvfs
ext4: clear DISCARD flag if device does not support discard
jbd2: remove jbd2_journal_unfile_buffer()
ext4: reorder capability check last
ext4: update the comment about mb_optimize_scan
jbd2: fix off-by-one while erasing journal
ext4: remove references to bh->b_page
ext4: goto right label 'out_mmap_sem' in ext4_setattr()
ext4: fix out-of-bound read in ext4_xattr_inode_dec_ref_all()
ext4: introduce ITAIL helper
jbd2: remove redundant function jbd2_journal_has_csum_v2or3_feature
ext4: remove redundant function ext4_has_metadata_csum
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs ceph updates from Christian Brauner:
"This contains the work to remove access to page->index from ceph
and fixes the test failure observed for ceph with generic/421 by
refactoring ceph_writepages_start()"
* tag 'vfs-6.15-rc1.ceph' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fscrypt: Change fscrypt_encrypt_pagecache_blocks() to take a folio
ceph: Fix error handling in fill_readdir_cache()
fs: Remove page_mkwrite_check_truncate()
ceph: Pass a folio to ceph_allocate_page_array()
ceph: Convert ceph_move_dirty_page_in_page_array() to move_dirty_folio_in_page_array()
ceph: Remove uses of page from ceph_process_folio_batch()
ceph: Convert ceph_check_page_before_write() to use a folio
ceph: Convert writepage_nounlock() to write_folio_nounlock()
ceph: Convert ceph_readdir_cache_control to store a folio
ceph: Convert ceph_find_incompatible() to take a folio
ceph: Use a folio in ceph_page_mkwrite()
ceph: Remove ceph_writepage()
ceph: fix generic/421 test failure
ceph: introduce ceph_submit_write() method
ceph: introduce ceph_process_folio_batch() method
ceph: extend ceph_writeback_ctl for ceph_writepages_start() refactoring
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs async dir updates from Christian Brauner:
"This contains cleanups that fell out of the work from async directory
handling:
- Change kern_path_locked() and user_path_locked_at() to never return
a negative dentry. This simplifies the usability of these helpers
in various places
- Drop d_exact_alias() from the remaining place in NFS where it is
still used. This also allows us to drop the d_exact_alias() helper
completely
- Drop an unnecessary call to fh_update() from nfsd_create_locked()
- Change i_op->mkdir() to return a struct dentry
Change vfs_mkdir() to return a dentry provided by the filesystems
which is hashed and positive. This allows us to reduce the number
of cases where the resulting dentry is not positive to very few
cases. The code in these places becomes simpler and easier to
understand.
- Repack DENTRY_* and LOOKUP_* flags"
* tag 'vfs-6.15-rc1.async.dir' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
doc: fix inline emphasis warning
VFS: Change vfs_mkdir() to return the dentry.
nfs: change mkdir inode_operation to return alternate dentry if needed.
fuse: return correct dentry for ->mkdir
ceph: return the correct dentry on mkdir
hostfs: store inode in dentry after mkdir if possible.
Change inode_operations.mkdir to return struct dentry *
nfsd: drop fh_update() from S_IFDIR branch of nfsd_create_locked()
nfs/vfs: discard d_exact_alias()
VFS: add common error checks to lookup_one_qstr_excl()
VFS: change kern_path_locked() and user_path_locked_at() to never return negative dentry
VFS: repack LOOKUP_ bit flags.
VFS: repack DENTRY_ flags.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs iomap updates from Christian Brauner:
- Allow the filesystem to submit the writeback bios.
- Allow the filsystem to track completions on a per-bio bases
instead of the entire I/O.
- Change writeback_ops so that ->submit_bio can be done by the
filesystem.
- A new ANON_WRITE flag for writes that don't have a block number
assigned to them at the iomap level leaving the filesystem to do
that work in the submission handler.
- Incremental iterator advance
The folio_batch support for zero range where the filesystem provides
a batch of folios to process that might not be logically continguous
requires more flexibility than the current offset based iteration
currently offers.
Update all iomap operations to advance the iterator within the
operation and thus remove the need to advance from the core iomap
iterator.
- Make buffered writes work with RWF_DONTCACHE
If RWF_DONTCACHE is set for a write, mark the folios being written as
uncached. On writeback completion the pages will be dropped.
- Introduce infrastructure for large atomic writes
This will eventually be used by xfs and ext4.
* tag 'vfs-6.15-rc1.iomap' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (42 commits)
iomap: rework IOMAP atomic flags
iomap: comment on atomic write checks in iomap_dio_bio_iter()
iomap: inline iomap_dio_bio_opflags()
iomap: fix inline data on buffered read
iomap: Lift blocksize restriction on atomic writes
iomap: Support SW-based atomic writes
iomap: Rename IOMAP_ATOMIC -> IOMAP_ATOMIC_HW
xfs: flag as supporting FOP_DONTCACHE
iomap: make buffered writes work with RWF_DONTCACHE
iomap: introduce a full map advance helper
iomap: rename iomap_iter processed field to status
iomap: remove unnecessary advance from iomap_iter()
dax: advance the iomap_iter on pte and pmd faults
dax: advance the iomap_iter on dedupe range
dax: advance the iomap_iter on unshare range
dax: advance the iomap_iter on zero range
dax: push advance down into dax_iomap_iter() for read and write
dax: advance the iomap_iter in the read/write path
iomap: convert misc simple ops to incremental advance
iomap: advance the iter on direct I/O
...
|
|
Mounting a corrupted filesystem with directory which contains '.' dir
entry with rec_len == block size results in out-of-bounds read (later
on, when the corrupted directory is removed).
ext4_empty_dir() assumes every ext4 directory contains at least '.'
and '..' as directory entries in the first data block. It first loads
the '.' dir entry, performs sanity checks by calling ext4_check_dir_entry()
and then uses its rec_len member to compute the location of '..' dir
entry (in ext4_next_entry). It assumes the '..' dir entry fits into the
same data block.
If the rec_len of '.' is precisely one block (4KB), it slips through the
sanity checks (it is considered the last directory entry in the data
block) and leaves "struct ext4_dir_entry_2 *de" point exactly past the
memory slot allocated to the data block. The following call to
ext4_check_dir_entry() on new value of de then dereferences this pointer
which results in out-of-bounds mem access.
Fix this by extending __ext4_check_dir_entry() to check for '.' dir
entries that reach the end of data block. Make sure to ignore the phony
dir entries for checksum (by checking name_len for non-zero).
Note: This is reported by KASAN as use-after-free in case another
structure was recently freed from the slot past the bound, but it is
really an OOB read.
This issue was found by syzkaller tool.
Call Trace:
[ 38.594108] BUG: KASAN: slab-use-after-free in __ext4_check_dir_entry+0x67e/0x710
[ 38.594649] Read of size 2 at addr ffff88802b41a004 by task syz-executor/5375
[ 38.595158]
[ 38.595288] CPU: 0 UID: 0 PID: 5375 Comm: syz-executor Not tainted 6.14.0-rc7 #1
[ 38.595298] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[ 38.595304] Call Trace:
[ 38.595308] <TASK>
[ 38.595311] dump_stack_lvl+0xa7/0xd0
[ 38.595325] print_address_description.constprop.0+0x2c/0x3f0
[ 38.595339] ? __ext4_check_dir_entry+0x67e/0x710
[ 38.595349] print_report+0xaa/0x250
[ 38.595359] ? __ext4_check_dir_entry+0x67e/0x710
[ 38.595368] ? kasan_addr_to_slab+0x9/0x90
[ 38.595378] kasan_report+0xab/0xe0
[ 38.595389] ? __ext4_check_dir_entry+0x67e/0x710
[ 38.595400] __ext4_check_dir_entry+0x67e/0x710
[ 38.595410] ext4_empty_dir+0x465/0x990
[ 38.595421] ? __pfx_ext4_empty_dir+0x10/0x10
[ 38.595432] ext4_rmdir.part.0+0x29a/0xd10
[ 38.595441] ? __dquot_initialize+0x2a7/0xbf0
[ 38.595455] ? __pfx_ext4_rmdir.part.0+0x10/0x10
[ 38.595464] ? __pfx___dquot_initialize+0x10/0x10
[ 38.595478] ? down_write+0xdb/0x140
[ 38.595487] ? __pfx_down_write+0x10/0x10
[ 38.595497] ext4_rmdir+0xee/0x140
[ 38.595506] vfs_rmdir+0x209/0x670
[ 38.595517] ? lookup_one_qstr_excl+0x3b/0x190
[ 38.595529] do_rmdir+0x363/0x3c0
[ 38.595537] ? __pfx_do_rmdir+0x10/0x10
[ 38.595544] ? strncpy_from_user+0x1ff/0x2e0
[ 38.595561] __x64_sys_unlinkat+0xf0/0x130
[ 38.595570] do_syscall_64+0x5b/0x180
[ 38.595583] entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: ac27a0ec112a0 ("[PATCH] ext4: initial copy of files from ext3")
Signed-off-by: Jakub Acs <acsjakub@amazon.de>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: linux-ext4@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Mahmoud Adam <mngyadam@amazon.com>
Cc: stable@vger.kernel.org
Cc: security@kernel.org
Link: https://patch.msgid.link/b3ae36a6794c4a01944c7d70b403db5b@amazon.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
A user complained that a message such as:
EXT4-fs (nvme0n1p3): re-mounted UUID ro. Quota mode: none.
implied that the file system was previously mounted read/write and was
now remounted read-only, when it could have been some other mount
state that had changed by the "mount -o remount" operation. Fix this
by only logging "ro"or "r/w" when it has changed.
https://bugzilla.kernel.org/show_bug.cgi?id=219132
Signed-off-by: Nicolas Bretz <bretznic@gmail.com>
Link: https://patch.msgid.link/20250319171011.8372-1-bretznic@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The error out label of file_modified() should be out_inode_lock in
ext4_fallocate().
Fixes: 2890e5e0f49e ("ext4: move out common parts into ext4_fallocate()")
Reported-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Link: https://patch.msgid.link/20250319023557.2785018-1-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Currently, outside error paths, we auto commit the super block after 1
hour has passed and 16MB worth of updates have been written since last
commit. This is a policy decision so make this tunable while keeping the
defaults same. This is useful if user wants to tweak the superblock
behavior or for debugging the codepath by allowing to trigger it more
frequently.
We can now tweak the super block update using sb_update_sec and
sb_update_kb files in /sys/fs/ext4/<dev>/
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/950fb8c9b2905620e16f02a3b9eeea5a5b6cb87e.1742279837.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Presently we always BUG_ON if trying to start a transaction on a journal marked
with JBD2_UNMOUNT, since this should never happen. However, while ltp running
stress tests, it was observed that in case of some error handling paths, it is
possible for update_super_work to start a transaction after the journal is
destroyed eg:
(umount)
ext4_kill_sb
kill_block_super
generic_shutdown_super
sync_filesystem /* commits all txns */
evict_inodes
/* might start a new txn */
ext4_put_super
flush_work(&sbi->s_sb_upd_work) /* flush the workqueue */
jbd2_journal_destroy
journal_kill_thread
journal->j_flags |= JBD2_UNMOUNT;
jbd2_journal_commit_transaction
jbd2_journal_get_descriptor_buffer
jbd2_journal_bmap
ext4_journal_bmap
ext4_map_blocks
...
ext4_inode_error
ext4_handle_error
schedule_work(&sbi->s_sb_upd_work)
/* work queue kicks in */
update_super_work
jbd2_journal_start
start_this_handle
BUG_ON(journal->j_flags &
JBD2_UNMOUNT)
Hence, introduce a new mount flag to indicate journal is destroying and only do
a journaled (and deferred) update of sb if this flag is not set. Otherwise, just
fallback to an un-journaled commit.
Further, in the journal destroy path, we have the following sequence:
1. Set mount flag indicating journal is destroying
2. force a commit and wait for it
3. flush pending sb updates
This sequence is important as it ensures that, after this point, there is no sb
update that might be journaled so it is safe to update the sb outside the
journal. (To avoid race discussed in 2d01ddc86606)
Also, we don't need a similar check in ext4_grp_locked_error since it is only
called from mballoc and AFAICT it would be always valid to schedule work here.
Fixes: 2d01ddc86606 ("ext4: save error info to sb through journal if available")
Reported-by: Mahesh Kumar <maheshkumar657g@gmail.com>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/9613c465d6ff00cd315602f99283d5f24018c3f7.1742279837.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Define an ext4 wrapper over jbd2_journal_destroy to make sure we
have consistent behavior during journal destruction. This will also
come useful in the next patch where we add some ext4 specific logic
in the destroy path.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/c3ba78c5c419757e6d5f2d8ebb4a8ce9d21da86a.1742279837.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
sizeof(char) evaluates to 1. Remove the churn.
Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://patch.msgid.link/20250316-ext4-hash-kcalloc-v2-1-2a99e93ec6e0@ethancedwards.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
This fixes an analogus bug that was fixed in xfs in commit
4b8d867ca6e2 ("xfs: don't over-report free space or inodes in
statvfs") where statfs can report misleading / incorrect information
where project quota is enabled, and the free space is less than the
remaining quota.
This commit will resolve a test failure in generic/762 which tests for
this bug.
Cc: stable@kernel.org
Fixes: 689c958cbe6b ("ext4: add project quota support")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
|
|
Flag IOMAP_ATOMIC_SW is not really required. The idea of having this flag
is that the FS ->iomap_begin callback could check if this flag is set to
decide whether to do a SW (FS-based) atomic write. But the FS can set
which ->iomap_begin callback it wants when deciding to do a FS-based
atomic write.
Furthermore, it was thought that IOMAP_ATOMIC_HW is not a proper name, as
the block driver can use SW-methods to emulate an atomic write. So change
back to IOMAP_ATOMIC.
The ->iomap_begin callback needs though to indicate to iomap core that
REQ_ATOMIC needs to be set, so add IOMAP_F_ATOMIC_BIO for that.
These changes were suggested by Christoph Hellwig and Dave Chinner.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20250320120250.4087011-4-john.g.garry@oracle.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
File systems call dax_break_mapping() prior to reallocating file system
blocks to ensure the page is not undergoing any DMA or other accesses.
Generally this is needed when a file is truncated to ensure that if a
block is reallocated nothing is writing to it. However filesystems
currently don't call this when an FS DAX inode is evicted.
This can cause problems when the file system is unmounted as a page can
continue to be under going DMA or other remote access after unmount. This
means if the file system is remounted any truncate or other operation
which requires the underlying file system block to be freed will not wait
for the remote access to complete. Therefore a busy block may be
reallocated to a new file leading to corruption.
Link: https://lkml.kernel.org/r/2d3cf575bbd095084993154be2f0aa7442e5cd28.1740713401.git-series.apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Tested-by: Alison Schofield <alison.schofield@intel.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Asahi Lina <lina@asahilina.net>
Cc: Balbir Singh <balbirs@nvidia.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chunyan Zhang <zhang.lyra@gmail.com>
Cc: Dan Wiliams <dan.j.williams@intel.com>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: linmiaohe <linmiaohe@huawei.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: Michael "Camp Drill Sergeant" Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Ted Ts'o <tytso@mit.edu>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Prior to freeing a block file systems supporting FS DAX must check that
the associated pages are both unmapped from user-space and not undergoing
DMA or other access from eg. get_user_pages(). This is achieved by
unmapping the file range and scanning the FS DAX page-cache to see if any
pages within the mapping have an elevated refcount.
This is done using two functions - dax_layout_busy_page_range() which
returns a page to wait for the refcount to become idle on. Rather than
open-code this introduce a common implementation to both unmap and wait
for the page to become idle.
Link: https://lkml.kernel.org/r/c4d381e41fc618296cee2820403c166d80599d5c.1740713401.git-series.apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Alison Schofield <alison.schofield@intel.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Asahi Lina <lina@asahilina.net>
Cc: Balbir Singh <balbirs@nvidia.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chunyan Zhang <zhang.lyra@gmail.com>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: linmiaohe <linmiaohe@huawei.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: Michael "Camp Drill Sergeant" Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Ted Ts'o <tytso@mit.edu>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A FS DAX page is considered idle when its refcount drops to one. This is
currently open-coded in all file systems supporting FS DAX. Move the idle
detection to a common function to make future changes easier.
Link: https://lkml.kernel.org/r/c2c9d269110b90224eeb1dc661ffbc1d82aa20c9.1740713401.git-series.apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Tested-by: Alison Schofield <alison.schofield@intel.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Asahi Lina <lina@asahilina.net>
Cc: Balbir Singh <balbirs@nvidia.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Chunyan Zhang <zhang.lyra@gmail.com>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: linmiaohe <linmiaohe@huawei.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: Michael "Camp Drill Sergeant" Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
commit 79add3a3f795e ("ext4: notify when discard is not supported")
noted that keeping the DISCARD flag is for possibility that the underlying
device might change in future even without file system remount. However,
this scenario has rarely occurred in practice on the device side. Even if
it does occur, it can be resolved with remount. Clearing the DISCARD flag
not only prevents confusion caused by mount options but also avoids
sending unnecessary discard commands.
Signed-off-by: Diangang Li <lidiangang@bytedance.com>
Link: https://patch.msgid.link/20250311021310.669524-1-lidiangang@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
capable() calls refer to enabled LSMs whether to permit or deny the
request. This is relevant in connection with SELinux, where a
capability check results in a policy decision and by default a denial
message on insufficient permission is issued.
It can lead to three undesired cases:
1. A denial message is generated, even in case the operation was an
unprivileged one and thus the syscall succeeded, creating noise.
2. To avoid the noise from 1. the policy writer adds a rule to ignore
those denial messages, hiding future syscalls, where the task
performs an actual privileged operation, leading to hidden limited
functionality of that task.
3. To avoid the noise from 1. the policy writer adds a rule to permit
the task the requested capability, while it does not need it,
violating the principle of least privilege.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250302160657.127253-2-cgoettsche@seltendoof.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Commit 196e402adf2e ("ext4: improve cr 0 / cr 1 group scanning") introduces
the sysfs control interface "mb_max_linear_groups" to address the problem
that rotational devices performance degrades when the "mb_optimize_scan"
feature is enabled, which may result in distant block group allocation.
However, the name of the interface was incorrect in the comment to the
ext4/mballoc.c file, and this patch fixes it, without further changes.
Signed-off-by: Zizhi Wo <wozizhi@huawei.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250224012005.689549-1-wozizhi@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Buffer heads are attached to folios, not to pages. Also
flush_dcache_page() is now deprecated in favour of flush_dcache_folio().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250213182303.2133205-1-willy@infradead.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Otherwise, if ext4_inode_attach_jinode() fails, a hung task will
happen because filemap_invalidate_unlock() isn't called to unlock
mapping->invalidate_lock. Like this:
EXT4-fs error (device sda) in ext4_setattr:5557: Out of memory
INFO: task fsstress:374 blocked for more than 122 seconds.
Not tainted 6.14.0-rc1-next-20250206-xfstests-dirty #726
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:fsstress state:D stack:0 pid:374 tgid:374 ppid:373
task_flags:0x440140 flags:0x00000000
Call Trace:
<TASK>
__schedule+0x2c9/0x7f0
schedule+0x27/0xa0
schedule_preempt_disabled+0x15/0x30
rwsem_down_read_slowpath+0x278/0x4c0
down_read+0x59/0xb0
page_cache_ra_unbounded+0x65/0x1b0
filemap_get_pages+0x124/0x3e0
filemap_read+0x114/0x3d0
vfs_read+0x297/0x360
ksys_read+0x6c/0xe0
do_syscall_64+0x4b/0x110
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: c7fc0366c656 ("ext4: partial zero eof block on unaligned inode size extension")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Link: https://patch.msgid.link/20250213112247.3168709-1-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
There's issue as follows:
BUG: KASAN: use-after-free in ext4_xattr_inode_dec_ref_all+0x6ff/0x790
Read of size 4 at addr ffff88807b003000 by task syz-executor.0/15172
CPU: 3 PID: 15172 Comm: syz-executor.0
Call Trace:
__dump_stack lib/dump_stack.c:82 [inline]
dump_stack+0xbe/0xfd lib/dump_stack.c:123
print_address_description.constprop.0+0x1e/0x280 mm/kasan/report.c:400
__kasan_report.cold+0x6c/0x84 mm/kasan/report.c:560
kasan_report+0x3a/0x50 mm/kasan/report.c:585
ext4_xattr_inode_dec_ref_all+0x6ff/0x790 fs/ext4/xattr.c:1137
ext4_xattr_delete_inode+0x4c7/0xda0 fs/ext4/xattr.c:2896
ext4_evict_inode+0xb3b/0x1670 fs/ext4/inode.c:323
evict+0x39f/0x880 fs/inode.c:622
iput_final fs/inode.c:1746 [inline]
iput fs/inode.c:1772 [inline]
iput+0x525/0x6c0 fs/inode.c:1758
ext4_orphan_cleanup fs/ext4/super.c:3298 [inline]
ext4_fill_super+0x8c57/0xba40 fs/ext4/super.c:5300
mount_bdev+0x355/0x410 fs/super.c:1446
legacy_get_tree+0xfe/0x220 fs/fs_context.c:611
vfs_get_tree+0x8d/0x2f0 fs/super.c:1576
do_new_mount fs/namespace.c:2983 [inline]
path_mount+0x119a/0x1ad0 fs/namespace.c:3316
do_mount+0xfc/0x110 fs/namespace.c:3329
__do_sys_mount fs/namespace.c:3540 [inline]
__se_sys_mount+0x219/0x2e0 fs/namespace.c:3514
do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x67/0xd1
Memory state around the buggy address:
ffff88807b002f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff88807b002f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff88807b003000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
^
ffff88807b003080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff88807b003100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Above issue happens as ext4_xattr_delete_inode() isn't check xattr
is valid if xattr is in inode.
To solve above issue call xattr_check_inode() check if xattr if valid
in inode. In fact, we can directly verify in ext4_iget_extra_inode(),
so that there is no divergent verification.
Fixes: e50e5129f384 ("ext4: xattr-in-inode support")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250208063141.1539283-3-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Introduce ITAIL helper to get the bound of xattr in inode.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250208063141.1539283-2-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Since commit f2b4fa19647e ("ext4: switch to using the crc32c library"),
ext4_has_metadata_csum() is just an alias for
ext4_has_feature_metadata_csum(). ext4_has_feature_metadata_csum() is
generated by EXT4_FEATURE_RO_COMPAT_FUNCS and uses the regular naming
convention for checking a single ext4 feature. Therefore, remove
ext4_has_metadata_csum() and update all its callers to use
ext4_has_feature_metadata_csum() directly.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://patch.msgid.link/20250207031335.42637-1-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Verify fast symlink length stored in inode->i_size matches the string
stored in the inode to avoid surprises from corrupted filesystems.
Reported-by: syzbot+48a99e426f29859818c0@syzkaller.appspotmail.com
Tested-by: syzbot+48a99e426f29859818c0@syzkaller.appspotmail.com
Fixes: bae80473f7b0 ("ext4: use inode_set_cached_link()")
Suggested-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://patch.msgid.link/20250206094454.20522-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
All callers now have a folio, so pass it in instead of converting
folio->page->folio.
Link: https://lkml.kernel.org/r/20250217192009.437916-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Once inside 'ext4_xattr_inode_dec_ref_all' we should
ignore xattrs entries past the 'end' entry.
This fixes the following KASAN reported issue:
==================================================================
BUG: KASAN: slab-use-after-free in ext4_xattr_inode_dec_ref_all+0xb8c/0xe90
Read of size 4 at addr ffff888012c120c4 by task repro/2065
CPU: 1 UID: 0 PID: 2065 Comm: repro Not tainted 6.13.0-rc2+ #11
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x1fd/0x300
? tcp_gro_dev_warn+0x260/0x260
? _printk+0xc0/0x100
? read_lock_is_recursive+0x10/0x10
? irq_work_queue+0x72/0xf0
? __virt_addr_valid+0x17b/0x4b0
print_address_description+0x78/0x390
print_report+0x107/0x1f0
? __virt_addr_valid+0x17b/0x4b0
? __virt_addr_valid+0x3ff/0x4b0
? __phys_addr+0xb5/0x160
? ext4_xattr_inode_dec_ref_all+0xb8c/0xe90
kasan_report+0xcc/0x100
? ext4_xattr_inode_dec_ref_all+0xb8c/0xe90
ext4_xattr_inode_dec_ref_all+0xb8c/0xe90
? ext4_xattr_delete_inode+0xd30/0xd30
? __ext4_journal_ensure_credits+0x5f0/0x5f0
? __ext4_journal_ensure_credits+0x2b/0x5f0
? inode_update_timestamps+0x410/0x410
ext4_xattr_delete_inode+0xb64/0xd30
? ext4_truncate+0xb70/0xdc0
? ext4_expand_extra_isize_ea+0x1d20/0x1d20
? __ext4_mark_inode_dirty+0x670/0x670
? ext4_journal_check_start+0x16f/0x240
? ext4_inode_is_fast_symlink+0x2f2/0x3a0
ext4_evict_inode+0xc8c/0xff0
? ext4_inode_is_fast_symlink+0x3a0/0x3a0
? do_raw_spin_unlock+0x53/0x8a0
? ext4_inode_is_fast_symlink+0x3a0/0x3a0
evict+0x4ac/0x950
? proc_nr_inodes+0x310/0x310
? trace_ext4_drop_inode+0xa2/0x220
? _raw_spin_unlock+0x1a/0x30
? iput+0x4cb/0x7e0
do_unlinkat+0x495/0x7c0
? try_break_deleg+0x120/0x120
? 0xffffffff81000000
? __check_object_size+0x15a/0x210
? strncpy_from_user+0x13e/0x250
? getname_flags+0x1dc/0x530
__x64_sys_unlinkat+0xc8/0xf0
do_syscall_64+0x65/0x110
entry_SYSCALL_64_after_hwframe+0x67/0x6f
RIP: 0033:0x434ffd
Code: 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 8
RSP: 002b:00007ffc50fa7b28 EFLAGS: 00000246 ORIG_RAX: 0000000000000107
RAX: ffffffffffffffda RBX: 00007ffc50fa7e18 RCX: 0000000000434ffd
RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000005
RBP: 00007ffc50fa7be0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001
R13: 00007ffc50fa7e08 R14: 00000000004bbf30 R15: 0000000000000001
</TASK>
The buggy address belongs to the object at ffff888012c12000
which belongs to the cache filp of size 360
The buggy address is located 196 bytes inside of
freed 360-byte region [ffff888012c12000, ffff888012c12168)
The buggy address belongs to the physical page:
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x12c12
head: order:1 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0x40(head|node=0|zone=0)
page_type: f5(slab)
raw: 0000000000000040 ffff888000ad7640 ffffea0000497a00 dead000000000004
raw: 0000000000000000 0000000000100010 00000001f5000000 0000000000000000
head: 0000000000000040 ffff888000ad7640 ffffea0000497a00 dead000000000004
head: 0000000000000000 0000000000100010 00000001f5000000 0000000000000000
head: 0000000000000001 ffffea00004b0481 ffffffffffffffff 0000000000000000
head: 0000000000000002 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888012c11f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff888012c12000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> ffff888012c12080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888012c12100: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc
ffff888012c12180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
Reported-by: syzbot+b244bda78289b00204ed@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b244bda78289b00204ed
Suggested-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Bhupesh <bhupesh@igalia.com>
Link: https://patch.msgid.link/20250128082751.124948-2-bhupesh@igalia.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Remove unused input "inode" in ext4_find_dest_de.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250123162050.2114499-4-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Remove unneeded forward declaration in namei.c
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250123162050.2114499-3-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Add missing brelse() for bh2 in ext4_dx_add_entry().
Fixes: ac27a0ec112a ("[PATCH] ext4: initial copy of files from ext3")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250123162050.2114499-2-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
This reverts commit bb480760ffc7018e21ee6f60241c2b99ff26ee0e.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250312073852.2123409-3-amir73il@gmail.com
|
|
Now, if dmesg is cleared, we have no way of knowing if the file system has
been shutdown. Moreover, ext4 allows directory reads even after the file
system has been shutdown, so when reading a file returns -EIO, we cannot
determine whether this is a hardware issue or if the file system has been
shutdown.
Therefore, when ext4 file system is shutdown, we're adding a 'shutdown'
hint to commands like mount so users can easily check the file system's
status.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250122114130.229709-8-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
After commit d3476f3dad4a ("ext4: don't set SB_RDONLY after filesystem
errors") in v6.12-rc1, the 'errors=remount-ro' mode no longer sets
SB_RDONLY on errors, which results in us seeing the filesystem is still
in rw state after errors.
Therefore, after setting EXT4_FLAGS_EMERGENCY_RO, display the emergency_ro
option so that users can query whether the current file system has become
emergency read-only due to errors through commands such as 'mount' or
'cat /proc/fs/ext4/sdx/options'.
Fixes: d3476f3dad4a ("ext4: don't set SB_RDONLY after filesystem errors")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250122114130.229709-7-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
And after commit 95257987a638 ("ext4: drop EXT4_MF_FS_ABORTED flag") in
v6.6-rc1, the EXT4_FLAGS_SHUTDOWN bit is set in ext4_handle_error() under
errors=remount-ro mode. This causes the read to fail even when the error
is triggered in errors=remount-ro mode.
To correct the behavior under errors=remount-ro, EXT4_FLAGS_SHUTDOWN is
replaced by the newly introduced EXT4_FLAGS_EMERGENCY_RO. This new flag
only prevents writes, matching the previous behavior with SB_RDONLY.
Fixes: 95257987a638 ("ext4: drop EXT4_MF_FS_ABORTED flag")
Closes: https://lore.kernel.org/all/22d652f6-cb3c-43f5-b2fe-0a4bb6516a04@huawei.com/
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250122114130.229709-6-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Some functions check sb_rdonly() to make sure the file system isn't
modified after it's read-only. Since we also don't want the file system
modified if it's in an emergency state (shutdown or emergency_ro),
we're adding additional ext4_emergency_state() checks where sb_rdonly()
is checked.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250122114130.229709-5-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Since both SHUTDOWN and EMERGENCY_RO are emergency states of the ext4 file
system, and they are checked in similar locations, we have added a helper
function, ext4_emergency_state(), to determine whether the current file
system is in one of these two emergency states.
Then, replace calls to ext4_forced_shutdown() with ext4_emergency_state()
in those functions that could potentially trigger write operations.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250122114130.229709-4-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
EXT4_FLAGS_EMERGENCY_RO Indicates that the current file system has become
read-only due to some error. Compared to SB_RDONLY, setting it does not
require a lock because we won't clear it, which avoids over-coupling with
vfs freeze. Also, add a helper function ext4_emergency_ro() to check if
the bit is set.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250122114130.229709-3-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Do away with the defines and use an enum as it's cleaner.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250122114130.229709-2-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
When CONFIG_DEBUG_SPINLOCK is not enabled (general case), there are four
4 bytes holes and one 2 bytes hole in struct ext4_inode_info. Move the
members to pack the four 4 bytes holes.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250122110533.4116662-10-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
After commit 378f32bab371 ("ext4: introduce direct I/O write using iomap
infrastructure"), no one cares about the value of i_unwritten, so there
is no need to maintain this variable, remove it, and clean up the
associated logic.
Suggested-by: Zhang Yi <yi.zhang@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250122110533.4116662-9-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Since ext4's data_err=abort mode doesn't depend on
JBD2_ABORT_ON_SYNCDATA_ERR anymore, and nobody else uses it, we can
drop it and only warn in jbd2 as it used to be long ago.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250122110533.4116662-7-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
