| Age | Commit message (Collapse) | Author |
|---|
|
No callers passes flags to xfs_buf_get_uncached, which makes sense
given that the flags apply to behavior not used for uncached buffers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
No callers passes flags to xfs_buf_read_uncached, which makes sense
given that the flags apply to behavior not used for uncached buffers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Remove unnecessary NULL check before kvfree() reported by
Coccinelle/coccicheck and the semantic patch at
scripts/coccinelle/free/ifnullfree.cocci.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Replace the inner loop growing one RT bitmap block at a time with
one just modifying the superblock counters for growing an entire
zone (aka RTG). The big restriction is just like at mkfs time only
a RT extent size of a single FSB is allowed, and the file system
capacity needs to be aligned to the zone size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
|
|
For zoned RT devices space is always allocated at the write pointer, that
is right after the last written block and only recorded on I/O completion.
Because the actual allocation algorithm is very simple and just involves
picking a good zone - preferably the one used for the last write to the
inode. As the number of zones that can written at the same time is
usually limited by the hardware, selecting a zone is done as late as
possible from the iomap dio and buffered writeback bio submissions
helpers just before submitting the bio.
Given that the writers already took a reservation before acquiring the
iolock, space will always be readily available if an open zone slot is
available. A new structure is used to track these open zones, and
pointed to by the xfs_rtgroup. Because zoned file systems don't have
a rsum cache the space for that pointer can be reused.
Allocations are only recorded at I/O completion time. The scheme used
for that is very similar to the reflink COW end I/O path.
Co-developed-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
|
|
Allow creating an RT subvolume on the same device as the main data
device. This is mostly used for SMR HDDs where the conventional zones
are used for the data device and the sequential write required zones
for the zoned RT section.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
|
|
Zone file systems reuse the basic RT group enabled XFS file system
structure to support a mode where each RT group is always written from
start to end and then reset for reuse (after moving out any remaining
data). There are few minor but important changes, which are indicated
by a new incompat flag:
1) there are no bitmap and summary inodes, thus the
/rtgroups/{rgno}.{bitmap,summary} metadir files do not exist and the
sb_rbmblocks superblock field must be cleared to zero.
2) there is a new superblock field that specifies the start of an
internal RT section. This allows supporting SMR HDDs that have random
writable space at the beginning which is used for the XFS data device
(which really is the metadata device for this configuration), directly
followed by a RT device on the same block device. While something
similar could be achieved using dm-linear just having a single device
directly consumed by XFS makes handling the file systems a lot easier.
3) Another superblock field that tracks the amount of reserved space (or
overprovisioning) that is never used for user capacity, but allows GC
to run more smoothly.
4) an overlay of the cowextsize field for the rtrmap inode so that we
can persistently track the total amount of rtblocks currently used in
a RT group. There is no data structure other than the rmap that
tracks used space in an RT group, and this counter is used to decide
when a RT group has been entirely emptied, and to select one that
is relatively empty if garbage collection needs to be performed.
While this counter could be tracked entirely in memory and rebuilt
from the rmap at mount time, that would lead to very long mount times
with the large number of RT groups implied by the number of hardware
zones especially on SMR hard drives with 256MB zone sizes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
|
|
Add a helper to check that the last block of a RT device is readable
to share the code between mount and growfs. This also adds the mount
time overflow check to growfs and improves the error messages.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
|
|
Currently each metabtree inode has it's own space reservation to ensure
it can be expanded to the maximum size, mirroring what is done for the
AG-based btrees. But unlike the AG-based btrees the metabtree inodes
aren't restricted to allocate from a single AG but can use free space
form the entire file system. And unlike AG-based btrees where the
required reservation shrinks with the available free space due to this,
the metabtree reservations for the rtrmap and rtfreflink trees are not
bound in any way by the data device free space as they track RT extent
allocations. This is not very efficient as it requires a large number
of blocks to be set aside that can't be used at all by other btrees.
Switch to a model that uses a global pool instead in preparation for
reducing the amount of reserved space, which now also removes the
overloading of the i_nblocks field for metabtree inodes, which would
create problems if metabtree inodes ever had a big enough xattr fork
to require xattr blocks outside the inode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
|
|
xfs_{add,dec}_freecounter already handles the block and RT extent
percpu counters, but it currently hardcodes the passed in counter.
Add a freecounter abstraction that uses an enum to designate the counter
and add wrappers that hide the actual percpu_counters. This will allow
expanding the reserved block handling to the RT extent counter in the
next step, and also prepares for adding yet another such counter that
can share the code. Both these additions will be needed for the zoned
allocator.
Also switch the flooring of the frextents counter to 0 in statfs for the
rthinherit case to a manual min_t call to match the handling of the
fdblocks counter for normal file systems.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
|
|
The buffer cache keeps a bt_io_count per-CPU counter to track all
in-flight I/O, which is used to ensure no I/O is in flight when
unmounting the file system.
For most I/O we already keep track of inflight I/O at higher levels:
- for synchronous I/O (xfs_buf_read/xfs_bwrite/xfs_buf_delwri_submit),
the caller has a reference and waits for I/O completions using
xfs_buf_iowait
- for xfs_buf_delwri_submit_nowait the only caller (AIL writeback)
tracks the log items that the buffer attached to
This only leaves only xfs_buf_readahead_map as a submitter of
asynchronous I/O that is not tracked by anything else. Replace the
bt_io_count per-cpu counter with a more specific bt_readahead_count
counter only tracking readahead I/O. This allows to simply increment
it when submitting readahead I/O and decrementing it when it completed,
and thus simplify xfs_buf_rele and remove the needed for the
XBF_NO_IOACCT flags and the XFS_BSTATE_IN_FLIGHT buffer state.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Enable reflink for realtime devices, as long as the realtime allocation
unit is a single fsblock.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Port the copy on write fork repair to realtime files.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
The size of filesystem transaction reservations depends on the maximum
height (maxlevels) of the realtime btrees. Since we don't want a grow
operation to increase the reservation size enough that we'll fail the
minimum log size checks on the next mount, constrain growfs operations
if they would cause an increase in the rt refcount btree maxlevels.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Wire up the copy-on-write extent size hint for realtime files, and
connect it to the rt allocator so that we avoid fragmentation on rt
filesystems.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Reserve some free blocks so that we will always have enough free blocks
in the data volume to handle expansion of the realtime refcount btree.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Permit mounting filesystems with realtime rmap btrees.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
The size of filesystem transaction reservations depends on the maximum
height (maxlevels) of the realtime btrees. Since we don't want a grow
operation to increase the reservation size enough that we'll fail the
minimum log size checks on the next mount, constrain growfs operations
if they would cause an increase in those maxlevels.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Create a library routine to allocate and initialize an empty realtime
rmapbt inode. We'll use this for mkfs and repair.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Reserve some free blocks so that we will always have enough free blocks
in the data volume to handle expansion of the realtime rmap btree.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Create some simple helpers to reduce the amount of typing whenever we
access rtgroup inodes. Conversion was done with this spatch and some
minor reformatting:
@@
expression rtg;
@@
- rtg->rtg_inodes[XFS_RTGI_BITMAP]
+ rtg_bitmap(rtg)
@@
expression rtg;
@@
- rtg->rtg_inodes[XFS_RTGI_SUMMARY]
+ rtg_summary(rtg)
and the CLI command:
$ spatch --sp-file /tmp/moo.cocci --dir fs/xfs/ --use-gitgrep --in-place
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Create a new space reservation scheme so that btree metadata for the
realtime volume can reserve space in the data device to avoid space
underruns.
Back when we were testing the rmap and refcount btrees for the data
device, people observed occasional shutdowns when xfs_btree_split was
called for either of those two btrees. This happened when certain
operations (mostly writeback ioends) created new rmap or refcount
records, which would expand the size of the btree. If there were no
free blocks available the allocation would fail and the split would shut
down the filesystem.
I considered pre-reserving blocks for btree expansion at the time of a
write() call, but there wasn't any good way to attach the reservations
to an inode and keep them there all the way to ioend processing. Unlike
delalloc reservations which have that indlen mechanism, there's no way
to do that for mapped extents; and indlen blocks are given back during
the delalloc -> unwritten transition.
The solution was to reserve sufficient blocks for rmap/refcount btree
expansion at mount time. This is what the XFS_AG_RESV_* flags provide;
any expansion of those two btrees can come from the pre-reserved space.
This patch brings that pre-reservation ability to inode-rooted btrees so
that the rt rmap and refcount btrees can also save room for future
expansion.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
xfs_bmap_rtalloc initializes the bno_hint variable to NULLRTBLOCK (aka
NULLFSBLOCK). If the allocation request is for a file range that's
adjacent to an existing mapping, it will then change bno_hint to the
blkno hint in the bmalloca structure.
In other words, bno_hint is either a rt block number, or it's all 1s.
Unfortunately, commit ec12f97f1b8a8f didn't take the NULLRTBLOCK state
into account, which means that it tries to translate that into a
realtime extent number. We then end up with an obnoxiously high rtx
number and pointlessly feed that to the near allocator. This often
fails and falls back to the by-size allocator. Seeing as we had no
locality hint anyway, this is a waste of time.
Fix the code to detect a lack of bno_hint correctly. This was detected
by running xfs/009 with metadir enabled and a 28k rt extent size.
Cc: <stable@vger.kernel.org> # v6.12
Fixes: ec12f97f1b8a8f ("xfs: make the rtalloc start hint a xfs_rtblock_t")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Enable quotas for the realtime device.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
For rtgroups filesystems, track newly freed (rt) space through the log
until the rt EFIs have been committed to disk. This way we ensure that
space cannot be reused until all traces of the old owner are gone.
As a fringe benefit, we now support -o discard on the realtime device.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Move the min and max agblock numbers to the generic xfs_group structure
so that we can start building validators for extents within an rtgroup.
While we're at it, use check_add_overflow for the extent length
computation because that has much better overflow checking.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Now that we've finished adding allocation groups to the realtime volume,
let's make the file block mapping address (xfs_rtblock_t) a segmented
value just like we do on the data device. This means that group number
and block number conversions can be done with shifting and masking
instead of integer division.
While in theory we could continue caching the rgno shift value in
m_rgblklog, the fact that we now always use the shift value means that
we have an opportunity to increase the redundancy of the rt geometry by
storing it in the ondisk superblock and adding more sb verifier code.
Extend the sueprblock to store the rgblklog value.
Now that we have segmented addresses, set the correct values in
m_groups[XG_TYPE_RTG] so that the xfs_group helpers work correctly.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Make the allocator rtgroup aware by either picking a specific group if
there is a hint, or loop over all groups otherwise. A simple rotor is
provided to pick the placement for initial allocations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Enable growing the rt section when realtime groups are enabled.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Upgrade rtbitmap and rtsummary blocks to have self describing metadata
like most every other thing in XFS.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Check the realtime superblock at mount time, to ensure that the label
and uuids actually match the primary superblock on the data device. If
the rt superblock is good, attach it to the xfs_mount so that the log
can use ordered buffers to keep this primary in sync with the primary
super on the data device.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Define the ondisk format of realtime group metadata, and a superblock
for realtime volumes. rt supers are conditionally enabled by a
predicate function so that they can be disabled if we ever implement
zoned storage support for the realtime volume.
For rt group enabled file systems there is a separate bitmap and summary
file for each group and thus the number of bitmap and summary blocks
needs to be calculated differently.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
To prepare for adding per-rtgroup bitmap files, make the xfs_rtxnum_t
type encode the RT extent number relative to the rtgroup. The biggest
part of this to clearly distinguish between the relative extent number
that gets masked when converting from a global block number and length
values that just have a factor applied to them when converting from
file system blocks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Make xfs_rtsummary_blockcount take all the required information from
the mount structure and return the number of summary levels from it
as well. This cleans up many of the callers and prepares for making the
rtsummary files per-rtgroup where they need to look at different value.
This means we recalculate some values in some callers, but as all these
calculations are outside the fast path and cheap, which seems like a
price worth paying.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Rename the existing xfs_rtbitmap_blockcount to
xfs_rtbitmap_blockcount_len and add a new xfs_rtbitmap_blockcount wrapper
around it that takes the number of extents from the mount structure.
This will simplify the move to per-rtgroup bitmaps as those will need to
pass in the number of extents per rtgroup instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Split the check that the rtsummary fits into the log into a separate
helper, and use xfs_growfs_rt_alloc_fake_mount to calculate the new RT
geometry.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
[djwong: avoid division for the 0-rtx growfs check]
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Use xfs_growfs_rt_alloc_fake_mount instead of manually recalculating
the RT bitmap geometry.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Split the code to set up a fake mount point to calculate new RT
geometry out of xfs_growfs_rt_bmblock so that it can be reused.
Note that this changes the rmblocks calculation method to be based
on the passed in rblocks and extsize and not the explicitly passed
one, but both methods will always lead to the same result. The new
version just does a little bit more math while being more general.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Now that we've centralized the realtime metadata locking routines, get
rid of the ILOCK subclasses since we now use explicit lockdep classes.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
To support adding new RT groups in growfs, we need to be able to create
the per-RT group files. Add a new xfs_rtginode_create helper to create
a given per-RTG file. Most of the code for that is shared, but the
details of the actual file are abstracted out using a new create method
in struct xfs_rtginode_ops.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Move the pointers to the RT bitmap and summary inodes as well as the
summary cache to the rtgroups structure to prepare for having a
separate bitmap and summary inodes for each rtgroup.
Code using the inodes now needs to operate on a rtgroup. Where easily
possible such code is converted to iterate over all rtgroups, else
rtgroup 0 (the only one that can currently exist) is hardcoded.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Split out a helper to allocate or grow the rtbitmap and rtsummary files
in preparation of per-RT group bitmap and summary files.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Create the necessary per-rtgroup infrastructure that we need to load
metadata inodes into memory.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Create an incore object that will contain information about a realtime
allocation group. This will eventually enable us to shard the realtime
section in a similar manner to how we shard the data section, but for
now just a single object for the entire RT subvolume is created.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Create a xfs_trans_metafile_iget function for metadata inodes to ensure
that when we try to iget a metadata file, the inode is allocated and its
file mode matches the metadata file type the caller expects.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Track the RT summary file size in blocks, just like the RT bitmap
file. While we have users of both units, blocks are used slightly
more often and this matches the bitmap file for consistency.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
0 is a valid start RT extent, and with pending changes it will become
both more common and non-unique. Switch to pass a xfs_rtblock_t instead
so that we can use NULLRTBLOCK to determine if a hint was set or not.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Split the code to calculate the aligned allocation request from
xfs_bmap_rtalloc into a separate self-contained helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
xfs_rtallocate currently has two fallbacks, when an allocation fails:
1) drop the requested extent size alignment, if any, and retry
2) ignore the locality hint
Oddly enough it does those in order, as trying a different location
is more in line with what the user asked for, and does it in a very
unstructured way.
Lift the fallback to try to allocate without the locality hint into
xfs_rtallocate to both perform them in a more sensible order and to
clean up the code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Split out a helper from xfs_rtallocate that performs the actual
allocation. This keeps the scope of the xfs_rtalloc_args structure
contained, and prepares for rtgroups support.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
