| Age | Commit message (Collapse) | Author |
|---|
|
Merge mainline to pick up bcachefs poly1305 patch 4bf4b5046de0
("bcachefs: use library APIs for ChaCha20 and Poly1305"). This
is a prerequisite for removing the poly1305 shash algorithm.
|
|
bch2_stdio_redirect_vprintf() was missing a check for stdio->done, i.e.
exiting.
This caused the thread attempting to print to spin, and since it was
being called from the kthread ran by thread_with_stdio, the userspace
side hung as well.
Change it to return -EPIPE - i.e. writing to a pipe that's been closed.
Reported-by: Jan Solanti <jhs@psonet.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Pull smb client fixes from Steve French:
- fix posix mkdir error to ksmbd (also avoids crash in
cifs_destroy_request_bufs)
- two smb1 fixes: fixing querypath info and setpathinfo to old servers
- fix rsize/wsize when not multiple of page size to address DIO
reads/writes
* tag '6.15-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: ensure aligned IO sizes
cifs: Fix changing times and read-only attr over SMB1 smb_set_file_info() function
cifs: Fix and improve cifs_query_path_info() and cifs_query_file_info()
smb: client: fix zero length for mkdir POSIX create context
|
|
Pull bcachefs fixes from Kent Overstreet:
"Lots of assorted small fixes...
- Some repair path fixes, a fix for -ENOMEM when reconstructing lots
of alloc info on large filesystems, upgrade for ancient 0.14
filesystems, etc.
- Various assert tweaks; assert -> ERO, ERO -> log the error in the
superblock and continue
- casefolding now uses d_ops like on other casefolding filesystems
- fix device label create on device add, fix bucket array resize on
filesystem resize
- fix xattrs with FORTIFY_SOURCE builds with gcc-15/clang"
* tag 'bcachefs-2025-05-01' of git://evilpiepirate.org/bcachefs: (22 commits)
bcachefs: Remove incorrect __counted_by annotation
bcachefs: add missing sched_annotate_sleep()
bcachefs: Fix __bch2_dev_group_set()
bcachefs: Kill ERO for i_blocks check in truncate
bcachefs: check for inode.bi_sectors underflow
bcachefs: Kill ERO in __bch2_i_sectors_acct()
bcachefs: readdir fixes
bcachefs: improve missing journal write device error message
bcachefs: Topology error after insert is now an ERO
bcachefs: Use bch2_kvmalloc() for journal keys array
bcachefs: More informative error message when shutting down due to error
bcachefs: btree_root_unreadable_and_scan_found_nothing autofix for non data btrees
bcachefs: btree_node_data_missing is now autofix
bcachefs: Don't generate alloc updates to invalid buckets
bcachefs: Improve bch2_dev_bucket_missing()
bcachefs: fix bch2_dev_buckets_resize()
bcachefs: Add upgrade table entry from 0.14
bcachefs: Run BCH_RECOVERY_PASS_reconstruct_snapshots on missing subvol -> snapshot
bcachefs: Add missing utf8_unload()
bcachefs: Emit unicode version message on startup
...
|
|
Give userspace a way to instruct the kernel to install a pidfd into the
usermode helper process. This makes coredump handling a lot more
reliable for userspace. In parallel with this commit we already have
systemd adding support for this in [1].
We create a pidfs file for the coredumping process when we process the
corename pattern. When the usermode helper process is forked we then
install the pidfs file as file descriptor three into the usermode
helpers file descriptor table so it's available to the exec'd program.
Since usermode helpers are either children of the system_unbound_wq
workqueue or kthreadd we know that the file descriptor table is empty
and can thus always use three as the file descriptor number.
Note, that we'll install a pidfd for the thread-group leader even if a
subthread is calling do_coredump(). We know that task linkage hasn't
been removed due to delay_group_leader() and even if this @current isn't
the actual thread-group leader we know that the thread-group leader
cannot be reaped until @current has exited.
Link: https://github.com/systemd/systemd/pull/37125 [1]
Link: https://lore.kernel.org/20250414-work-coredump-v2-3-685bf231f828@kernel.org
Tested-by: Luca Boccassi <luca.boccassi@gmail.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The replace_fd() helper returns the file descriptor number on success
and a negative error code on failure. The current error handling in
umh_pipe_setup() only works because the file descriptor that is replaced
is zero but that's pretty volatile. Explicitly check for a negative
error code.
Link: https://lore.kernel.org/20250414-work-coredump-v2-2-685bf231f828@kernel.org
Tested-by: Luca Boccassi <luca.boccassi@gmail.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Since all pidfds must be O_RDWR currently enfore that directly in the
file allocation function itself instead of letting callers specify it.
Link: https://lore.kernel.org/20250414-work-coredump-v2-1-685bf231f828@kernel.org
Tested-by: Luca Boccassi <luca.boccassi@gmail.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
After commit 0a65bc27bd64 ("eventpoll: Set epoll timeout if it's in
the future"), the following program would immediately enter a busy
loop in the kernel:
```
int main() {
int e = epoll_create1(0);
struct epoll_event event = {.events = EPOLLIN};
epoll_ctl(e, EPOLL_CTL_ADD, 0, &event);
const struct timespec timeout = {.tv_nsec = 1};
epoll_pwait2(e, &event, 1, &timeout, 0);
}
```
This happens because the given (non-zero) timeout of 1 nanosecond
usually expires before ep_poll() is entered and then
ep_schedule_timeout() returns false, but `timed_out` is never set
because the code line that sets it is skipped. This quickly turns
into a soft lockup, RCU stalls and deadlocks, inflicting severe
headaches to the whole system.
When the timeout has expired, we don't need to schedule a hrtimer, but
we should set the `timed_out` variable. Therefore, I suggest moving
the ep_schedule_timeout() check into the `timed_out` expression
instead of skipping it.
brauner: Note that there was an earlier fix by Joe Damato in response to
my bug report in [1].
Fixes: 0a65bc27bd64 ("eventpoll: Set epoll timeout if it's in the future")
Cc: Joe Damato <jdamato@fastly.com>
Cc: stable@vger.kernel.org
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Link: https://lore.kernel.org/20250429153419.94723-1-jdamato@fastly.com [1]
Link: https://lore.kernel.org/20250429185827.3564438-1-max.kellermann@ionos.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The folio_index() helper is only needed for mixed usage of page cache
and swap cache, for pure page cache usage, the caller can just use
folio->index instead.
It can't be a swap cache folio here. Swap mapping may only call into fs
through 'swap_rw' but btrfs does not use that method for swap.
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This reverts commit 7e06de7c83a746e58d4701e013182af133395188.
Commit 7e06de7c83a7 ("btrfs: canonicalize the device path before adding
it") tries to make btrfs to use "/dev/mapper/*" name first, then any
filename inside "/dev/" as the device path.
This is mostly fine when there is only the root namespace involved, but
when multiple namespace are involved, things can easily go wrong for the
d_path() usage.
As d_path() returns a file path that is namespace dependent, the
resulted string may not make any sense in another namespace.
Furthermore, the "/dev/" prefix checks itself is not reliable, one can
still make a valid initramfs without devtmpfs, and fill all needed
device nodes manually.
Overall the userspace has all its might to pass whatever device path for
mount, and we are not going to win the war trying to cover every corner
case.
So just revert that commit, and do no extra d_path() based file path
sanity check.
CC: stable@vger.kernel.org # 6.12+
Link: https://lore.kernel.org/linux-fsdevel/20250115185608.GA2223535@zen.localdomain/
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
When trying read-only scrub on a btrfs with rescue=idatacsums mount
option, it will crash with the following call trace:
BUG: kernel NULL pointer dereference, address: 0000000000000208
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
CPU: 1 UID: 0 PID: 835 Comm: btrfs Tainted: G O 6.15.0-rc3-custom+ #236 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022
RIP: 0010:btrfs_lookup_csums_bitmap+0x49/0x480 [btrfs]
Call Trace:
<TASK>
scrub_find_fill_first_stripe+0x35b/0x3d0 [btrfs]
scrub_simple_mirror+0x175/0x290 [btrfs]
scrub_stripe+0x5f7/0x6f0 [btrfs]
scrub_chunk+0x9a/0x150 [btrfs]
scrub_enumerate_chunks+0x333/0x660 [btrfs]
btrfs_scrub_dev+0x23e/0x600 [btrfs]
btrfs_ioctl+0x1dcf/0x2f80 [btrfs]
__x64_sys_ioctl+0x97/0xc0
do_syscall_64+0x4f/0x120
entry_SYSCALL_64_after_hwframe+0x76/0x7e
[CAUSE]
Mount option "rescue=idatacsums" will completely skip loading the csum
tree, so that any data read will not find any data csum thus we will
ignore data checksum verification.
Normally call sites utilizing csum tree will check the fs state flag
NO_DATA_CSUMS bit, but unfortunately scrub does not check that bit at all.
This results in scrub to call btrfs_search_slot() on a NULL pointer
and triggered above crash.
[FIX]
Check both extent and csum tree root before doing any tree search.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
num_extent_folios() unconditionally calls folio_order() on
eb->folios[0]. If that is NULL this will be a segfault. It is reasonable
for it to return 0 as the number of folios in the eb when the first
entry is NULL, so do that instead.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In preparation for making the kmalloc() family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
The assigned type is "struct folio **" but the returned type will be
"struct page **". These are the same allocation size (pointer size), but
the types don't match. Adjust the allocation type to match the assignment.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In commit bbdc6076d2e5 ("binfmt_elf: move brk out of mmap when doing
direct loader exec"), the brk was moved out of the mmap region when
loading static PIE binaries (ET_DYN without INTERP). The common case
for these binaries was testing new ELF loaders, so the brk needed to
be away from mmap to avoid colliding with stack, future mmaps (of the
loader-loaded binary), etc. But this was only done when ASLR was enabled,
in an attempt to minimize changes to memory layouts.
After adding support to respect alignment requirements for static PIE
binaries in commit 3545deff0ec7 ("binfmt_elf: Honor PT_LOAD alignment
for static PIE"), it became possible to have a large gap after the
final PT_LOAD segment and the top of the mmap region. This means that
future mmap allocations might go after the last PT_LOAD segment (where
brk might be if ASLR was disabled) instead of before them (where they
traditionally ended up).
On arm64, running with ASLR disabled, Ubuntu 22.04's "ldconfig" binary,
a static PIE, has alignment requirements that leaves a gap large enough
after the last PT_LOAD segment to fit the vdso and vvar, but still leave
enough space for the brk (which immediately follows the last PT_LOAD
segment) to be allocated by the binary.
fffff7f20000-fffff7fde000 r-xp 00000000 fe:02 8110426 /sbin/ldconfig.real
fffff7fee000-fffff7ff5000 rw-p 000be000 fe:02 8110426 /sbin/ldconfig.real
fffff7ff5000-fffff7ffa000 rw-p 00000000 00:00 0
***[brk will go here at fffff7ffa000]***
fffff7ffc000-fffff7ffe000 r--p 00000000 00:00 0 [vvar]
fffff7ffe000-fffff8000000 r-xp 00000000 00:00 0 [vdso]
fffffffdf000-1000000000000 rw-p 00000000 00:00 0 [stack]
After commit 0b3bc3354eb9 ("arm64: vdso: Switch to generic storage
implementation"), the arm64 vvar grew slightly, and suddenly the brk
collided with the allocation.
fffff7f20000-fffff7fde000 r-xp 00000000 fe:02 8110426 /sbin/ldconfig.real
fffff7fee000-fffff7ff5000 rw-p 000be000 fe:02 8110426 /sbin/ldconfig.real
fffff7ff5000-fffff7ffa000 rw-p 00000000 00:00 0
***[oops, no room any more, vvar is at fffff7ffa000!]***
fffff7ffa000-fffff7ffe000 r--p 00000000 00:00 0 [vvar]
fffff7ffe000-fffff8000000 r-xp 00000000 00:00 0 [vdso]
fffffffdf000-1000000000000 rw-p 00000000 00:00 0 [stack]
The solution is to unconditionally move the brk out of the mmap region
for static PIE binaries. Whether ASLR is enabled or not does not change if
there may be future mmap allocation collisions with a growing brk region.
Update memory layout comments (with kernel-doc headings), consolidate
the setting of mm->brk to later (it isn't needed early), move static PIE
brk out of mmap unconditionally, and make sure brk(2) knows to base brk
position off of mm->start_brk not mm->end_data no matter what the cause of
moving it is (via current->brk_randomized).
For the CONFIG_COMPAT_BRK case, though, leave the logic unchanged, as we
can never safely move the brk. These systems, however, are not using
specially aligned static PIE binaries.
Reported-by: Ryan Roberts <ryan.roberts@arm.com>
Closes: https://lore.kernel.org/lkml/f93db308-4a0e-4806-9faf-98f890f5a5e6@arm.com/
Fixes: bbdc6076d2e5 ("binfmt_elf: move brk out of mmap when doing direct loader exec")
Link: https://lore.kernel.org/r/20250425224502.work.520-kees@kernel.org
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Tested-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
The previous patch that added bounds check for create lease context
introduced a memory leak. When the bounds check fails, the function
returns NULL without freeing the previously allocated lease_ctx_info
structure.
This patch fixes the issue by adding kfree(lreq) before returning NULL
in both boundary check cases.
Fixes: bab703ed8472 ("ksmbd: add bounds check for create lease context")
Signed-off-by: Wang Zhaolong <wangzhaolong1@huawei.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Client can send empty newname string to ksmbd server.
It will cause a kernel oops from d_alloc.
This patch return the error when attempting to rename
a file or directory with an empty new name string.
Cc: stable@vger.kernel.org
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Cross-merge networking fixes after downstream PR (net-6.15-rc5).
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This actually reverts 86e92eeeb237 ("bcachefs: Annotate struct bch_xattr
with __counted_by()").
After the x_name, there is a value. According to the disscussion[1],
__counted_by assumes that the flexible array member contains exactly
the amount of elements that are specified. Now there are users came across
a false positive detection of an out of bounds write caused by
the __counted_by here[2], so revert that.
[1] https://lore.kernel.org/lkml/Zv8VDKWN1GzLRT-_@archlinux/T/#m0ce9541c5070146320efd4f928cc1ff8de69e9b2
[2] https://privatebin.net/?a0d4e97d590d71e1#9bLmp2Kb5NU6X6cZEucchDcu88HzUQwHUah8okKPReEt
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
00594 ------------[ cut here ]------------
00594 do not call blocking ops when !TASK_RUNNING; state=2 set at [<000000003e51ef4a>] prepare_to_wait_event+0x5c/0x1c0
00594 WARNING: CPU: 12 PID: 1117 at kernel/sched/core.c:8741 __might_sleep+0x74/0x88
00594 Modules linked in:
00594 CPU: 12 UID: 0 PID: 1117 Comm: umount Not tainted 6.15.0-rc4-ktest-g3a72e369412d #21845 PREEMPT
00594 Hardware name: linux,dummy-virt (DT)
00594 pstate: 60001005 (nZCv daif -PAN -UAO -TCO -DIT +SSBS BTYPE=--)
00594 pc : __might_sleep+0x74/0x88
00594 lr : __might_sleep+0x74/0x88
00594 sp : ffffff80c8d67a90
00594 x29: ffffff80c8d67a90 x28: ffffff80f5903500 x27: 0000000000000000
00594 x26: 0000000000000000 x25: ffffff80cf5002a0 x24: ffffffc087dad000
00594 x23: ffffff80c8d67b40 x22: 0000000000000000 x21: 0000000000000000
00594 x20: 0000000000000242 x19: ffffffc080b92020 x18: 00000000ffffffff
00594 x17: 30303c5b20746120 x16: 74657320323d6574 x15: 617473203b474e49
00594 x14: 0000000000000001 x13: 00000000000c0000 x12: ffffff80facc0000
00594 x11: 0000000000000001 x10: 0000000000000001 x9 : ffffffc0800b0774
00594 x8 : c0000000fffbffff x7 : ffffffc087dac670 x6 : 00000000015fffa8
00594 x5 : ffffff80facbffa8 x4 : ffffff80fbd30b90 x3 : 0000000000000000
00594 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffff80f5903500
00594 Call trace:
00594 __might_sleep+0x74/0x88 (P)
00594 __mutex_lock+0x64/0x8d8
00594 mutex_lock_nested+0x28/0x38
00594 bch2_fs_ec_flush+0xf8/0x128
00594 __bch2_fs_read_only+0x54/0x1d8
00594 bch2_fs_read_only+0x3e0/0x438
00594 __bch2_fs_stop+0x5c/0x250
00594 bch2_put_super+0x18/0x28
00594 generic_shutdown_super+0x6c/0x140
00594 bch2_kill_sb+0x1c/0x38
00594 deactivate_locked_super+0x54/0xd0
00594 deactivate_super+0x70/0x90
00594 cleanup_mnt+0xec/0x188
00594 __cleanup_mnt+0x18/0x28
00594 task_work_run+0x90/0xd8
00594 do_notify_resume+0x138/0x148
00594 el0_svc+0x9c/0xa0
00594 el0t_64_sync_handler+0x104/0x130
00594 el0t_64_sync+0x154/0x158
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bch2_sb_disk_groups_to_cpu() goes off of the superblock member info, so
we need to set that first.
Reported-by: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Make all IO sizes multiple of PAGE_SIZE, either negotiated by the
server or passed through rsize, wsize and bsize mount options, to
prevent from breaking DIO reads and writes against servers that
enforce alignment as specified in MS-FSA 2.1.5.3 and 2.1.5.4.
Cc: linux-cifs@vger.kernel.org
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Replace with logging the error in the superblock.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We won't be root causing this in the immediate future, and it's fairly
innocuous - so just log it in the superblock.
https://github.com/koverstreet/bcachefs/issues/869
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Allow read-only mounts on rtdevs and logdevs that are marked as
read-only and make sure those mounts can't be remounted read-write.
Use the sb_open_mode helper to make sure that we don't try to open
devices with write access enabled for read-only mounts.
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix potential inode leak in iget() after memory allocation failure
- in subpage mode, fix extent buffer bitmap iteration when writing out
dirty sectors
- fix range calculation when falling back to COW for a NOCOW file
* tag 'for-6.15-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: adjust subpage bit start based on sectorsize
btrfs: fix the inode leak in btrfs_iget()
btrfs: fix COW handling in run_delalloc_nocow()
|
|
- Don't call bch2_trans_relock() after dir_emit(); taking a transaction
restart here will cause us to emit the same dirent to userspace twice
- Fix incorrect checking of the return value on dir_emit(): "true" means
success, keep going, but bch2_dir_emit() needs to return true when
we're finished iterating.
https://github.com/koverstreet/bcachefs/issues/867
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
function
Function CIFSSMBSetPathInfo() is not supported by non-NT servers and
returns error. Fallback code via open filehandle and CIFSSMBSetFileInfo()
does not work neither because CIFS_open() works also only on NT server.
Therefore currently the whole smb_set_file_info() function as a SMB1
callback for the ->set_file_info() does not work with older non-NT SMB
servers, like Win9x and others.
This change implements fallback code in smb_set_file_info() which will
works with any server and allows to change time values and also to set or
clear read-only attributes.
To make existing fallback code via CIFSSMBSetFileInfo() working with also
non-NT servers, it is needed to change open function from CIFS_open()
(which is NT specific) to cifs_open_file() which works with any server
(this is just a open wrapper function which choose the correct open
function supported by the server).
CIFSSMBSetFileInfo() is working also on non-NT servers, but zero time
values are not treated specially. So first it is needed to fill all time
values if some of them are missing, via cifs_query_path_info() call.
There is another issue, opening file in write-mode (needed for changing
attributes) is not possible when the file has read-only attribute set.
The only option how to clear read-only attribute is via SMB_COM_SETATTR
command. And opening directory is not possible neither and here the
SMB_COM_SETATTR command is the only option how to change attributes.
And CIFSSMBSetFileInfo() does not honor setting read-only attribute, so
for setting is also needed to use SMB_COM_SETATTR command.
Existing code in cifs_query_path_info() is already using SMB_COM_GETATTR as
a fallback code path (function SMBQueryInformation()), so introduce a new
function SMBSetInformation which will implement SMB_COM_SETATTR command.
My testing showed that Windows XP SMB1 client is also using SMB_COM_SETATTR
command for setting or clearing read-only attribute against non-NT server.
So this can prove that this is the correct way how to do it.
With this change it is possible set all 4 time values and all attributes,
including clearing and setting read-only bit on non-NT SMB servers.
Tested against Win98 SMB1 server.
This change fixes "touch" command which was failing when called on existing
file. And fixes also "chmod +w" and "chmod -w" commands which were also
failing (as they are changing read-only attribute).
Note that this change depends on following change
"cifs: Improve cifs_query_path_info() and cifs_query_file_info()"
as it require to query all 4 time attribute values.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When CAP_NT_SMBS was not negotiated then do not issue CIFSSMBQPathInfo()
and CIFSSMBQFileInfo() commands. CIFSSMBQPathInfo() is not supported by
non-NT Win9x SMB server and CIFSSMBQFileInfo() returns from Win9x SMB
server bogus data in Attributes field (for example lot of files are marked
as reparse points, even Win9x does not support them and read-only bit is
not marked for read-only files). Correct information is returned by
CIFSFindFirst() or SMBQueryInformation() command.
So as a fallback in cifs_query_path_info() function use CIFSFindFirst()
with SMB_FIND_FILE_FULL_DIRECTORY_INFO level which is supported by both NT
and non-NT servers and as a last option use SMBQueryInformation() as it was
before.
And in function cifs_query_file_info() immediately returns -EOPNOTSUPP when
not communicating with NT server. Client then revalidate inode entry by the
cifs_query_path_info() call, which is working fine. So fstat() syscall on
already opened file will receive correct information.
Note that both fallback functions in non-UNICODE mode expands wildcards.
Therefore those fallback functions cannot be used on paths which contain
SMB wildcard characters (* ? " > <).
CIFSFindFirst() returns all 4 time attributes as opposite of
SMBQueryInformation() which returns only one.
With this change it is possible to query all 4 times attributes from Win9x
server and at the same time, client minimize sending of unsupported
commands to server.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
SMB create requests issued via smb311_posix_mkdir() have an incorrect
length of zero bytes for the POSIX create context data. ksmbd server
rejects such requests and logs "cli req too short" causing mkdir to fail
with "invalid argument" on the client side. It also causes subsequent
rmmod to crash in cifs_destroy_request_bufs()
Inspection of packets sent by cifs.ko using wireshark show valid data for
the SMB2_POSIX_CREATE_CONTEXT is appended with the correct offset, but
with an incorrect length of zero bytes. Fails with ksmbd+cifs.ko only as
Windows server/client does not use POSIX extensions.
Fix smb311_posix_mkdir() to set req->CreateContextsLength as part of
appending the POSIX creation context to the request.
Signed-off-by: Jethro Donaldson <devel@jro.nz>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
DLM does not use any exported SCTP function. SCTP is registered
dynamically as protocol to the kernel and can be used over the right
protocol identifiers on the socket api. We drop the SCTP dependency as
DLM can also be used with TCP only.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Reviewed-by: Heming zhao <heming.zhao@suse.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
Reject SCTP dlm configuration if the kernel was never build with SCTP.
Currently the only one known user space tool "dlm_controld" will drop an
error in the logs and getting stuck. This behaviour should be fixed to
deliver an error to the user or fallback to TCP.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Reviewed-by: Heming zhao <heming.zhao@suse.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
Currently SCTP shutdown() call gets stuck because there is no incoming
EOF indicator on its socket. On the peer side the EOF indicator as
recvmsg() returns 0 will be triggered as mechanism to flush the socket
queue on the receive side. In SCTP recvmsg() function sctp_recvmsg() we
can see that only if sk_shutdown has the bit RCV_SHUTDOWN set SCTP will
recvmsg() will return EOF. The RCV_SHUTDOWN bit will only be set when
shutdown with SHUT_RD is called. We use now SHUT_RDWR to also get a EOF
indicator from recvmsg() call on the shutdown() initiator.
SCTP does not support half closed sockets and the semantic of SHUT_WR is
different here, it seems that calling SHUT_WR on sctp sockets keeps the
socket open to have the possibility to do some specific SCTP operations on
it that we don't do here.
There exists still a difference in the limitations of TCP vs SCTP in
case if we are required to have a half closed socket functionality. This
was tried to archieve with DLM protocol changes in the past and
hopefully we really don't require half closed socket functionality.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Tested-by: Heming zhao <heming.zhao@suse.com>
Reviewed-by: Heming zhao <heming.zhao@suse.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
The sk->sk_shutdown value is flag value so use masking to check if
RCV_SHUTDOWN is set as other possible values like SEND_SHUTDOWN can set
as well.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Tested-by: Heming zhao <heming.zhao@suse.com>
Reviewed-by: Heming zhao <heming.zhao@suse.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
In ovl_path_type() and ovl_is_metacopy_dentry() GCC notices that it is
possible for OVL_E() to return NULL (which implies that d_inode(dentry)
may be NULL). This would result in out of bounds reads via container_of(),
seen with GCC 15's -Warray-bounds -fdiagnostics-details. For example:
In file included from arch/x86/include/generated/asm/rwonce.h:1,
from include/linux/compiler.h:339,
from include/linux/export.h:5,
from include/linux/linkage.h:7,
from include/linux/fs.h:5,
from fs/overlayfs/util.c:7:
In function 'ovl_upperdentry_dereference',
inlined from 'ovl_dentry_upper' at ../fs/overlayfs/util.c:305:9,
inlined from 'ovl_path_type' at ../fs/overlayfs/util.c:216:6:
include/asm-generic/rwonce.h:44:26: error: array subscript 0 is outside array bounds of 'struct inode[7486503276667837]' [-Werror=array-bounds=]
44 | #define __READ_ONCE(x) (*(const volatile __unqual_scalar_typeof(x) *)&(x))
| ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/asm-generic/rwonce.h:50:9: note: in expansion of macro '__READ_ONCE'
50 | __READ_ONCE(x); \
| ^~~~~~~~~~~
fs/overlayfs/ovl_entry.h:195:16: note: in expansion of macro 'READ_ONCE'
195 | return READ_ONCE(oi->__upperdentry);
| ^~~~~~~~~
'ovl_path_type': event 1
185 | return inode ? OVL_I(inode)->oe : NULL;
'ovl_path_type': event 2
Avoid this by allowing ovl_dentry_upper() to return NULL if d_inode() is
NULL, as that means the problematic dereferencing can never be reached.
Note that this fixes the over-eager compiler warning in an effort to
being able to enable -Warray-bounds globally. There is no known
behavioral bug here.
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Remove hard-coded strings by using the str_on_off() helper function.
Acked-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
This allows the "verity" mount option to be used with "userxattr" data-only
layer(s).
Also it allows dropping the "metacopy=on" option when the "datadir+" option
is to be used. This cleanly separates the two features that have been
lumped together under "metacopy=on":
- data-redirect: data access is redirected to the data-only layer
- meta-copy: copy up metadata only if possible
Previous patches made sure that with "userxattr" metacopy only works in the
lower -> data scenario.
In this scenario the lower (metadata) layer must be secured against
tampering, in which case the verity checksums contained in this layer can
ensure integrity of data even in the case of an untrusted data layer.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Allow the special case of a redirect from a lower layer to a data layer
without having to turn on metacopy. This makes the feature work with
userxattr, which in turn allows data layers to be usable in user
namespaces.
Minimize the risk by only enabling redirect from a single lower layer to a
data layer iff a data layer is specified. The only way to access a data
layer is to enable this, so there's really no reason not to enable this.
This can be used safely if the lower layer is read-only and the
user.overlay.redirect xattr cannot be modified.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
When overlayfs finds a file with metacopy and/or redirect attributes and
the metacopy and/or redirect features are not enabled, then it refuses to
act on those attributes while also issuing a warning.
There was an inconsistency in not checking metacopy found from the index.
And also only warning on an upper metacopy if it found the next file on the
lower layer, while always warning for metacopy found on a lower layer.
Fix these inconsistencies and make the logic more straightforward, paving
the way for following patches to change when data redirects are allowed.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
When the lowerdir of an overlayfs is a merged directory of another
overlayfs, ovl_open_realfile() will fail to open the real file and point
to a lower dentry copy, without the proper parent path. After this,
d_path() will then display the path incorrectly as if the file is placed
in the root directory.
This bug can be triggered with the following setup:
mkdir -p ovl-A/lower ovl-A/upper ovl-A/merge ovl-A/work
mkdir -p ovl-B/upper ovl-B/merge ovl-B/work
cp /bin/cat ovl-A/lower/
mount -t overlay overlay -o \
lowerdir=ovl-A/lower,upperdir=ovl-A/upper,workdir=ovl-A/work \
ovl-A/merge
mount -t overlay overlay -o \
lowerdir=ovl-A/merge,upperdir=ovl-B/upper,workdir=ovl-B/work \
ovl-B/merge
ovl-A/merge/cat /proc/self/maps | grep --color cat
ovl-B/merge/cat /proc/self/maps | grep --color cat
The first cat will correctly show `/ovl-A/merge/cat`, while the second
one shows just `/cat`.
To fix that, uses file_user_path() inside of backing_file_open() to get
the correct file path for the dentry.
Co-developed-by: John Schoenick <johns@valvesoftware.com>
Signed-off-by: John Schoenick <johns@valvesoftware.com>
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Fixes: def3ae83da02 ("fs: store real path instead of fake path in backing file f_path")
Cc: <stable@vger.kernel.org> # v6.7
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Opt_err is not used in EROFS, we can remove it.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Reviewed-by: Gao Xiang <xiang@kernel.org>
Link: https://lore.kernel.org/r/20250429075056.689570-1-lihongbo22@huawei.com
Signed-off-by: Gao Xiang <xiang@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify fix from Jan Kara:
"A fix for the recently merged mount notification support"
* tag 'fsnotify_for_v6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
selftests/fs/mount-notify: test also remove/flush of mntns marks
fanotify: fix flush of mntns marks
|
|
After commit 475d0db742e3 ("fs: Fix theoretical division by 0 in
super_cache_scan()."), there's no need to plus one to prevent
division by zero.
Remove it to simplify the code.
Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com>
Link: https://lore.kernel.org/20250428135050.267297-1-alexjlzheng@tencent.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Since PMEM didn't quite lift off, DAX isn't as widely used as we
originally hoped. Thus it doesn't seem warranted to support
implementation of DAX in ext2 driver when the same filesystem can be
accessed through ext4 driver as a "simple implementation". Just
deprecate DAX support in ext2 targetting completely dropping the code at
the end of 2025.
Link: https://lore.kernel.org/all/uiu7rcmtooxgbscaiiim7czqsca52bgrt6aiszsafq7jj4n3e7@ge6mfzcmnorl
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
If bio_add_folio() fails (because it is full),
erofs_fileio_scan_folio() needs to submit the I/O request via
erofs_fileio_rq_submit() and allocate a new I/O request with an empty
`struct bio`. Then it retries the bio_add_folio() call.
However, at this point, erofs_onlinefolio_split() has already been
called which increments `folio->private`; the retry will call
erofs_onlinefolio_split() again, but there will never be a matching
erofs_onlinefolio_end() call. This leaves the folio locked forever
and all waiters will be stuck in folio_wait_bit_common().
This bug has been added by commit ce63cb62d794 ("erofs: support
unencoded inodes for fileio"), but was practically unreachable because
there was room for 256 folios in the `struct bio` - until commit
9f74ae8c9ac9 ("erofs: shorten bvecs[] for file-backed mounts") which
reduced the array capacity to 16 folios.
It was now trivial to trigger the bug by manually invoking readahead
from userspace, e.g.:
posix_fadvise(fd, 0, st.st_size, POSIX_FADV_WILLNEED);
This should be fixed by invoking erofs_onlinefolio_split() only after
bio_add_folio() has succeeded. This is safe: asynchronous completions
invoking erofs_onlinefolio_end() will not unlock the folio because
erofs_fileio_scan_folio() is still holding a reference to be released
by erofs_onlinefolio_end() at the end.
Fixes: ce63cb62d794 ("erofs: support unencoded inodes for fileio")
Fixes: 9f74ae8c9ac9 ("erofs: shorten bvecs[] for file-backed mounts")
Cc: stable@vger.kernel.org
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Reviewed-by: Gao Xiang <xiang@kernel.org>
Tested-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://lore.kernel.org/r/20250428230933.3422273-1-max.kellermann@ionos.com
Signed-off-by: Gao Xiang <xiang@kernel.org>
|
|
A user hit this, and this will naturally be easier to debug if we don't
panic.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We can hit this limit fairly easy when we have to reconstuct large
amounts of alloc info on large filesystems.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
btrees
If loosing a btree won't cause data loss - i.e. it's an alloc btree, or
we can easily reconstruct it - we shouldn't require user action to
continue repair.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
