| Age | Commit message (Collapse) | Author |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.15
A moderately large batch of fixes for v6.15, many driver specific
including cleanups for the enabling of the Cirrus KUnit tests and a fix
for a nasty crash on resume on AMD systems. We also have one core fix,
for an ordering issue between DAPM and DPCM which could leave things
incorrectly unpowered.
|
|
The volume control for cs35l56 speakers has a maximum gain of +12 dB.
However, for many use cases, this can cause distorted audio, depending
various factors, such as other signal-processing elements in the chain,
for example if the audio passes through a gain control before reaching
the amp or the signal path has been tuned for a particular maximum
gain in the amp.
In the case of systems which use the soc_sdw_* driver, audio will
likely be distorted in all cases above 0 dB, therefore add a volume
limit of 400, which is 0 dB maximum volume inside this driver.
The volume limit should be applied to both soundwire and soundwire
bridge configurations.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://patch.msgid.link/20250430103134.24579-3-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The conversion function from MIDI 1.0 to UMP packet contains an
internal buffer to keep the incoming MIDI bytes, and its size is 4, as
it was supposed to be the max size for a MIDI1 UMP packet data.
However, the implementation overlooked that SysEx is handled in a
different format, and it can be up to 6 bytes, as found in
do_convert_to_ump(). It leads eventually to a buffer overflow, and
may corrupt the memory when a longer SysEx message is received.
The fix is simply to extend the buffer size to 6 to fit with the SysEx
UMP message.
Fixes: 0b5288f5fe63 ("ALSA: ump: Add legacy raw MIDI support")
Reported-by: Argusee <vr@darknavy.com>
Link: https://patch.msgid.link/20250429124845.25128-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- Support for SoundWire Bulk Register Access (BRA) protocol in core
along with Intel driver support and ASoC bits required
- AMD driver updates and support for ACP 7.0 and 7.1 platforms
* tag 'soundwire-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (28 commits)
soundwire: take in count the bandwidth of a prepared stream
ASoC: rt711-sdca: add DP0 support
soundwire: debugfs: add interface for BPT/BRA transfers
ASoC: SOF: Intel: hda-sdw-bpt: add CHAIN_DMA support
soundwire: intel_ace2x: add BPT send_async/wait callbacks
soundwire: intel: add BPT context definition
ASoC: SOF: Intel: hda-sdw-bpt: add helpers for SoundWire BPT DMA
soundwire: intel_auxdevice: add indirection for BPT send_async/wait
soundwire: cadence: add BTP/BRA helpers to format data
soundwire: bus: add bpt_stream pointer
soundwire: bus: add send_async/wait APIs for BPT protocol
soundwire: stream: reuse existing code for BPT stream
soundwire: stream: special-case the bus compute_params() routine
soundwire: stream: extend sdw_alloc_stream() to take 'type' parameter
soundwire: extend sdw_stream_type to BPT
soundwire: cadence: add BTP support for DP0
Documentation: driver: add SoundWire BRA description
soundwire: amd: change the log level for command response log
soundwire: slave: fix an OF node reference leak in soundwire slave device
soundwire: Use str_enable_disable-like helpers
...
|
|
Pull drm updates from Dave Airlie:
"Outside of drm there are some rust patches from Danilo who maintains
that area in here, and some pieces for drm header check tests.
The major things in here are a new driver supporting the touchbar
displays on M1/M2, the nova-core stub driver which is just the vehicle
for adding rust abstractions and start developing a real driver inside
of.
xe adds support for SVM with a non-driver specific SVM core
abstraction that will hopefully be useful for other drivers, along
with support for shrinking for TTM devices. I'm sure xe and AMD
support new devices, but the pipeline depth on these things is hard to
know what they end up being in the marketplace!
uapi:
- add mediatek tiled fourcc
- add support for notifying userspace on device wedged
new driver:
- appletbdrm: support for Apple Touchbar displays on m1/m2
- nova-core: skeleton rust driver to develop nova inside off
firmware:
- add some rust firmware pieces
rust:
- add 'LocalModule' type alias
component:
- add helper to query bound status
fbdev:
- fbtft: remove access to page->index
media:
- cec: tda998x: import driver from drm
dma-buf:
- add fast path for single fence merging
tests:
- fix lockdep warnings
atomic:
- allow full modeset on connector changes
- clarify semantics of allow_modeset and drm_atomic_helper_check
- async-flip: support on arbitary planes
- writeback: fix UAF
- Document atomic-state history
format-helper:
- support ARGB8888 to ARGB4444 conversions
buddy:
- fix multi-root cleanup
ci:
- update IGT
dp:
- support extended wake timeout
- mst: fix RAD to string conversion
- increase DPCD eDP control CAP size to 5 bytes
- add DPCD eDP v1.5 definition
- add helpers for LTTPR transparent mode
panic:
- encode QR code according to Fido 2.2
scheduler:
- add parameter struct for init
- improve job peek/pop operations
- optimise drm_sched_job struct layout
ttm:
- refactor pool allocation
- add helpers for TTM shrinker
panel-orientation:
- add a bunch of new quirks
panel:
- convert panels to multi-style functions
- edp: Add support for B140UAN04.4, BOE NV140FHM-NZ, CSW MNB601LS1-3,
LG LP079QX1-SP0V, MNE007QS3-7, STA 116QHD024002, Starry
116KHD024006, Lenovo T14s Gen6 Snapdragon
- himax-hx83102: Add support for CSOT PNA957QT1-1, Kingdisplay
kd110n11-51ie, Starry 2082109qfh040022-50e
- visionox-r66451: use multi-style MIPI-DSI functions
- raydium-rm67200: Add driver for Raydium RM67200
- simple: Add support for BOE AV123Z7M-N17, BOE AV123Z7M-N17
- sony-td4353-jdi: Use MIPI-DSI multi-func interface
- summit: Add driver for Apple Summit display panel
- visionox-rm692e5: Add driver for Visionox RM692E5
bridge:
- pass full atomic state to various callbacks
- adv7511: Report correct capabilities
- it6505: Fix HDCP V compare
- snd65dsi86: fix device IDs
- nwl-dsi: set bridge type
- ti-sn65si83: add error recovery and set bridge type
- synopsys: add HDMI audio support
xe:
- support device-wedged event
- add mmap support for PCI memory barrier
- perf pmu integration and expose per-engien activity
- add EU stall sampling support
- GPU SVM and Xe SVM implementation
- use TTM shrinker
- add survivability mode to allow the driver to do firmware updates
in critical failure states
- PXP HWDRM support for MTL and LNL
- expose package/vram temps over hwmon
- enable DP tunneling
- drop mmio_ext abstraction
- Reject BO evcition if BO is bound to current VM
- Xe suballocator improvements
- re-use display vmas when possible
- add GuC Buffer Cache abstraction
- PCI ID update for Panther Lake and Battlemage
- Enable SRIOV for Panther Lake
- Refactor VRAM manager location
i915:
- enable extends wake timeout
- support device-wedged event
- Enable DP 128b/132b SST DSC
- FBC dirty rectangle support for display version 30+
- convert i915/xe to drm client setup
- Compute HDMI PLLS for rates not in fixed tables
- Allow DSB usage when PSR is enabled on LNL+
- Enable panel replay without full modeset
- Enable async flips with compressed buffers on ICL+
- support luminance based brightness via DPCD for eDP
- enable VRR enable/disable without full modeset
- allow GuC SLPC default strategies on MTL+ for performance
- lots of display refactoring in move to struct intel_display
amdgpu:
- add device wedged event
- support async page flips on overlay planes
- enable broadcast RGB drm property
- add info ioctl for virt mode
- OEM i2c support for RGB lights
- GC 11.5.2 + 11.5.3 support
- SDMA 6.1.3 support
- NBIO 7.9.1 + 7.11.2 support
- MMHUB 1.8.1 + 3.3.2 support
- DCN 3.6.0 support
- Add dynamic workload profile switching for GC 10-12
- support larger VBIOS sizes
- Mark gttsize parameters as deprecated
- Initial JPEG queue resset support
amdkfd:
- add KFD per process flags for setting precision
- sync pasid values between KGD and KFD
- improve GTT/VRAM handling for APUs
- fix user queue validation on GC7/8
- SDMA queue reset support
raedeon:
- rs400 hyperz fix
i2c:
- td998x: drop platform_data, split driver into media and bridge
ast:
- transmitter chip detection refactoring
- vbios display mode refactoring
- astdp: fix connection status and filter unsupported modes
- cursor handling refactoring
imagination:
- check job dependencies with sched helper
ivpu:
- improve command queue handling
- use workqueue for IRQ handling
- add support HW fault injection
- locking fixes
mgag200:
- add support for G200eH5
msm:
- dpu: add concurrent writeback support for DPU 10.x+
- use LTTPR helpers
- GPU:
- Fix obscure GMU suspend failure
- Expose syncobj timeline support
- Extend GPU devcoredump with pagetable info
- a623 support
- Fix a6xx gen1/gen2 indexed-register blocks in gpu snapshot /
devcoredump
- Display:
- Add cpu-cfg interconnect paths on SM8560 and SM8650
- Introduce KMS OMMU fault handler, causing devcoredump snapshot
- Fixed error pointer dereference in msm_kms_init_aspace()
- DPU:
- Fix mode_changing handling
- Add writeback support on SM6150 (QCS615)
- Fix DSC programming in 1:1:1 topology
- Reworked hardware resource allocation, moving it to the CRTC code
- Enabled support for Concurrent WriteBack (CWB) on SM8650
- Enabled CDM blocks on all relevant platforms
- Reworked debugfs interface for BW/clocks debugging
- Clear perf params before calculating bw
- Support YUV formats on writeback
- Fixed double inclusion
- Fixed writeback in YUV formats when using cloned output, Dropped
wb2_formats_rgb
- Corrected dpu_crtc_check_mode_changed and struct dpu_encoder_virt
kerneldocs
- Fixed uninitialized variable in dpu_crtc_kickoff_clone_mode()
- DSI:
- DSC-related fixes
- Rework clock programming
- DSI PHY:
- Fix 7nm (and lower) PHY programming
- Add proper DT schema definitions for DSI PHY clocks
- HDMI:
- Rework the driver, enabling the use of the HDMI Connector
framework
- Bindings:
- Added eDP PHY on SA8775P
nouveau:
- move drm_slave_encoder interface into driver
- nvkm: refactor GSP RPC
- use LTTPR helpers
mediatek:
- HDMI fixup and refinement
- add MT8188 dsc compatible
- MT8365 SoC support
panthor:
- Expose sizes of intenral BOs via fdinfo
- Fix race between reset and suspend
- Improve locking
qaic:
- Add support for AIC200
renesas:
- Fix limits in DT bindings
rockchip:
- support rk3562-mali
- rk3576: Add HDMI support
- vop2: Add new display modes on RK3588 HDMI0 up to 4K
- Don't change HDMI reference clock rate
- Fix DT bindings
- analogix_dp: add eDP support
- fix shutodnw
solomon:
- Set SPI device table to silence warnings
- Fix pixel and scanline encoding
v3d:
- handle clock
vc4:
- Use drm_exec
- Use dma-resv for wait-BO ioctl
- Remove seqno infrastructure
virtgpu:
- Support partial mappings of GEM objects
- Reserve VGA resources during initialization
- Fix UAF in virtgpu_dma_buf_free_obj()
- Add panic support
vkms:
- Switch to a managed modesetting pipeline
- Add support for ARGB8888
- fix UAf
xlnx:
- Set correct DMA segment size
- use mutex guards
- Fix error handling
- Fix docs"
* tag 'drm-next-2025-03-28' of https://gitlab.freedesktop.org/drm/kernel: (1762 commits)
drm/amd/pm: Update feature list for smu_v13_0_6
drm/amdgpu: Add parameter documentation for amdgpu_sync_fence
drm/amdgpu/discovery: optionally use fw based ip discovery
drm/amdgpu/discovery: use specific ip_discovery.bin for legacy asics
drm/amdgpu/discovery: check ip_discovery fw file available
drm/amd/pm: Remove unnecessay UQ10 to UINT conversion
drm/amd/pm: Remove unnecessay UQ10 to UINT conversion
drm/amdgpu/sdma_v4_4_2: update VM flush implementation for SDMA
drm/amdgpu: Optimize VM invalidation engine allocation and synchronize GPU TLB flush
drm/amd/amdgpu: Increase max rings to enable SDMA page ring
drm/amdgpu: Decode deferred error type in gfx aca bank parser
drm/amdgpu/gfx11: Add Cleaner Shader Support for GFX11.5 GPUs
drm/amdgpu/mes: clean up SDMA HQD loop
drm/amdgpu/mes: enable compute pipes across all MEC
drm/amdgpu/mes: drop MES 10.x leftovers
drm/amdgpu/mes: optimize compute loop handling
drm/amdgpu/sdma: guilty tracking is per instance
drm/amdgpu/sdma: fix engine reset handling
drm/amdgpu: remove invalid usage of sched.ready
drm/amdgpu: add cleaner shader trace point
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.15
This is a very big release due to a combination of some big new work,
mainly new drivers and generic SoundWire support, and some wide ranging
cleanup work that made small changes to a lot of drivers.
- Morimoto-san has completed the conversion to use modern terminology
for the clocking configuration, and several other cleanups with
narrower impact.
- All the power management operation configuration was updated to use
current idioms by Takashi Iwai.
- Clarification of the control operations from Charles Keepax.
- Prepartory work for more generic SoundWire SCDA controls from Charles
Keepax.
- Support for AMD ACP 7.x, AWINC WM88166, Everest ES8388, Intel AVS
PEAKVOL and GAIN DSP modules Mediatek MT8188 DMIC, NXP i.MX95, nVidia
Tegra interconnects, Rockchip RK3588 S/PDIF, Texas Instruments
SN012776 and TAS5770L, and Wolfson WM8904 DMICs,
Some changes from the tip tree adding APIs needed by the AMD code are
included, these were unfortunately rebased in the tip tree after being
pulled in. There's also some regmap changes supporting the SCDA work
and some devres refactoring that was pulled in to support other changes.
|
|
Merge series from Francesco Dolcini <francesco@dolcini.it>:
This patch series adds DMIC and DRC support to the WM8904 driver, a new
of_ helper is added to simplify the driver code.
DRC functionality is added in the same patch series to provide the
necessary dynamic range control to make DMIC support useful.
The WM8904 supports digital microphones on two of its inputs:
IN1L/DMICDAT1 and IN1R/DMICDAT2. These two inputs can either be
connected to an ADC or to the DMIC system. There is an ADC for each
line, and only one DMIC block. This DMIC block is either connected to
DMICDAT1 or to DMICDAT2. One DMIC data line supports two digital
microphones via time multiplexing.
The pin's functionality is decided during hardware design (IN1L vs
DMICDAT1 and IN1R vs DMICDAT2). This is reflected in the Device Tree.
If one line is analog and one is DMIC, we need to be able to switch
between ADC and DMIC at runtime. The DMIC source is known from the
Device Tree. If both are DMIC inputs, we need to be able to switch the
DMIC source. There is no need to switch between ADC and DMIC at runtime.
Therefore, kcontrols are dynamically added by the driver depending on
its Device Tree configuration.
This is a heavy rework of a previous patch series provided by Alifer
Moraes and Pierluigi Passaro,
https://lore.kernel.org/lkml/20220307141041.27538-1-alifer.m@variscite.com.
|
|
Read in optional codec-specific properties from the device tree.
The platform_data structure is not populated when using device trees.
This change parses optional dts properties to populate it.
- wlf,in1l-as-dmicdat1
- wlf,in1r-as-dmicdat2
- wlf,gpio-cfg
- wlf,micbias-cfg
- wlf,drc-cfg-regs
- wlf,drc-cfg-names
- wlf,retune-mobile-cfg-regs
- wlf,retune-mobile-cfg-names
- wlf,retune-mobile-cfg-hz
Datasheet: https://statics.cirrus.com/pubs/proDatasheet/WM8904_Rev4.1.pdf
Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250319142059.46692-5-francesco@dolcini.it
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
With the addition of the soc_mixer_ctl_to_reg() helper it is now very
clear that the only difference between snd_soc_put_volsw() and
snd_soc_put_volsw_range() is that the former supports double controls
with both values in the same register. As such we can combine both
functions.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250318171459.3203730-11-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
With the addition of the soc_mixer_reg_to_ctl() helper it is now very
clear that the only difference between snd_soc_get_volsw() and
snd_soc_get_volsw_range() is that the former supports double controls
with both values in the same register. As such we can combine both
functions.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250318171459.3203730-10-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The only difference between snd_soc_info_volsw() and
snd_soc_info_volsw_range() is that the later will not force a 2
value control to be of type integer if the name ends in "Volume".
The kernel currently contains no users of snd_soc_info_volsw_range()
that would return a boolean control with this code, so the risk is
quite low and it seems appropriate that it should contain volume
control detection. So remove snd_soc_info_volsw_range() and point its
users at snd_soc_info_volsw().
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250318171459.3203730-9-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
For calibration, basic version does not contain any calibration addresses,
it depends on calibration tool to convey the addresses to the driver.
Since Alpha and Beta firmware, all the calibration addresses are saved
into the firmware.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250313093238.1184-1-shenghao-ding@ti.com
|
|
Back-merge of 6.14 devel branch for further developments of TAS
codecsBack-merge of 6.14 devel branch for further developments.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add support for parsing the Group Entity properties from DisCo/ACPI.
Group Entities allow control of several other Entities, typically
Selector Units, from a single control.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250312172205.4152686-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
SDCA Ranges are two dimensional arrays of data associated with controls,
add a helper to provide an x,y access mechanism to the data and a helper
to locate a specific value inside a range.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250312172205.4152686-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
SDCA Controls come in a variety of data formats, to simplify later
parsing work out this data type as the control is parsed and stash it
for later use.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250312172205.4152686-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge the for-6.14 to resolve conflicts with simple-card-utils.c due to
parallel delveopment.
|
|
This is a backmerge from Linux 6.14-rc6, needed for the nova PR.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Add SoundWire BPT DMA helpers as a separate module to avoid circular
dependencies.
For now this assumes no link DMA, only coupled mode.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Tested-by: shumingf@realtek.com
Link: https://lore.kernel.org/r/20250227140615.8147-12-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
New register has been introduced with PTL in the vendor specific SHIM
registers, outside of the IPs itself for microphone privacy status handling.
Via the PVCCS register the current microphone privacy status can be checked
and the interrupt generation on status change can be enabled/disabled.
The status change interrupt is routed to the owner of the interface
(DSP/host).
The PVCCS is provided for each sublink under the IP to make it possible to
control the interrupt generation per sublink.
On status change the MDSTSCHG bit needs to be cleared for all sublink of
the interface to be able to detect future changes in privacy.
The status bit (MDSTS) is volatile in all PVCCS register, it reflects the
current state of the GPIO signal.
Microphone privacy is a hardware feature (if enabled and configured that
way), the host has only passive, monitoring role.
The added functions are generic to be future proof if the mic privacy
support is extended beyond Soundwire and DMIC links.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://patch.msgid.link/20250307112816.1495-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ACE3 (Panther Lake) introduced support for microphone privacy feature which
can - in hardware - mute incoming audio data based on a state of a physical
switch.
The change in the privacy state is delivered through interface IP blocks
and can only be handled by the link owner.
In Intel platforms Soundwire is for example host owned, so the interrupt
can only be handled by the host.
Since the input stream is going to be muted by hardware, the host needs to
send a message to firmware about the change in privacy so it can execute a
fade out/in to enhance user experience.
The support for microphone privacy can be queried from the HW_CONFIG data
under the INTEL_MIC_PRIVACY_CAP tuple. This is Intel specific data, the
core will pass it to platform code if the intel_configure_mic_privacy()
callback is provided.
Platform code can call sof_ipc4_mic_privacy_state_change() to send the IPC
message to the firmware on state change.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://patch.msgid.link/20250307112816.1495-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Adds snd_soc_dai_mute_is_ctrled_at_trigger() to judge
dai->driver->ops->mute_unmute_on_trigger flags
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/871pva6hs2.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge branch 'for-6.14' of
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into
asoc-6.15 to avoid a bunch of add/add conflicts.
|
|
This reverts commit 9bdd10d57a88 ("ASoC: ops: Shift tested values in
snd_soc_put_volsw() by +min"), and makes some additional related
updates.
There are two ways the platform_max could be interpreted; the maximum
register value, or the maximum value the control can be set to. The
patch moved from treating the value as a control value to a register
one. When the patch was applied it was technically correct as
snd_soc_limit_volume() also used the register interpretation. However,
even then most of the other usages treated platform_max as a
control value, and snd_soc_limit_volume() has since been updated to
also do so in commit fb9ad24485087 ("ASoC: ops: add correct range
check for limiting volume"). That patch however, missed updating
snd_soc_put_volsw() back to the control interpretation, and fixing
snd_soc_info_volsw_range(). The control interpretation makes more
sense as limiting is typically done from the machine driver, so it is
appropriate to use the customer facing representation rather than the
internal codec representation. Update all the code to consistently use
this interpretation of platform_max.
Finally, also add some comments to the soc_mixer_control struct to
hopefully avoid further patches switching between the two approaches.
Fixes: fb9ad24485087 ("ASoC: ops: add correct range check for limiting volume")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250228151456.3703342-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Re-implement SOC_DOUBLE_VALUE() in terms of SOC_DOUBLE_S_VALUE().
SOC_DOUBLE_S_VALUE() already had a minimum value so add this to
SOC_DOUBLE_VALUE as well, this allows replacement of several hard coded
value entries. Likewise update SOC_SINGLE_VALUE to match, which allows
replacement of even more hard coded values.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250304140500.976127-14-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
Tidy up the ASoC control value macros. Fix some drivers that should be
using core macros that aren't, combine the existing core macros to be
a little more consistent in style, and update the core macros to use
each other where possible.
|
|
PC speaker works well on this platform in BIOS and in Linux until sound
card drivers are loaded. Then it stops working.
There seems to be a beep generator node at 0x1a in this CODEC
(ALC269_TYPE_ALC215) but it seems to be only connected to capture mixers
at nodes 0x22 and 0x23.
If I unmute the mixer input for 0x1a at node 0x23 and start recording
from its "ALC285 Analog" capture device I can clearly hear beeps in that
recording.
So the beep generator is indeed working properly, however I wasn't able to
figure out any way to connect it to speakers.
However, the bits in the "Passthrough Control" register (0x36) seems to
work at least partially: by zeroing "B" and "h" and setting "S" I can at
least make the PIT PC speaker output appear either in this laptop speakers
or headphones (depending on whether they are connected or not).
There are some caveats, however:
* If the CODEC gets runtime-suspended the beeps stop so it needs HDA beep
device for keeping it awake during beeping.
* If the beep generator node is generating any beep the PC beep passthrough
seems to be temporarily inhibited, so the HDA beep device has to be
prevented from using the actual beep generator node - but the beep device
is still necessary due to the previous point.
* In contrast with other platforms here beep amplification has to be
disabled otherwise the beeps output are WAY louder than they were on pure
BIOS setup.
Unless someone (from Realtek probably) knows how to make the beep generator
node output appear in speakers / headphones using PC beep passthrough seems
to be the only way to make PC speaker beeping actually work on this
platform.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Acked-by: kailang@realtek.com
Link: https://patch.msgid.link/7461f695b4daed80f2fc4b1463ead47f04f9ad05.1739741254.git.mail@maciej.szmigiero.name
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Re-implement SOC_DOUBLE_R_VALUE() in terms of SOC_DOUBLE_R_S_VALUE().
SOC_DOUBLE_R_S_VALUE() already had a minimum value so add this to
SOC_DOUBLE_R_VALUE() as well, which makes SOC_DOUBLE_R_RANGE_VALUE()
redundant, so its usage is replaced.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250303171424.444556-13-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Update the DAPM kcontrol creation macros to use the ASoC macros where a
helpful version exists. One minor fixup is required in adau17x1, the
compiler doesn't like the extra level of macro indirection coupled with
the inline struct definition. Make the struct definition explicit.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250303171424.444556-12-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
A few drivers are open coding SOC_DAPM_DOUBLE_R_TLV() add a core
helper and use that instead.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250303171424.444556-11-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
SOC_SINGLE_VALUE_EXT() has no users, so remove it.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250303171424.444556-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
No drivers are using SND_SOC_DAIFMT_CB{MS}_CF{MS}.
Let's remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/875xkx8owm.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The concept of an SDCA default value differs slightly from the regmap
usage of the term. An SDCA default is a value that is parsed from DisCo
and then written out to the hardware if no user value has superceded
it. Add a helper function that will iterate through all the SDCA
Controls and write out any default values. After these have been written
out once they will exist in the cache and that will take care of any
user values superceeding them. The code here also writes out any
Controls with a fixed value as there is only one available value for
these Controls there is no point in allowing the user to select them,
simply treat them similarly to a default.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250217140159.2288784-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add helpers to parse the DisCo Constant values from ACPI and populate an
array of reg_defaults with these. This will allow drivers to access
these ACPI specified values through the same interface as other
registers that are physically present on the device, using the regmap
cache.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250217140159.2288784-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add helper functions that SDCA drivers can use to calculate the
properties of SDCA Controls (registers) specified through DisCo.
Most of these are fairly obvious from the SDCA Access Modes.
DisCo Constants, values which are specified in the ACPI rather than on
the device, are handled as unreadable and unwritable registers. The
intention is these will be populated in the register defaults table
allowing drivers to read them normally. This means the drivers can be
agnostic as to which values are DisCo Constants.
Finally, support for SDCA Dual Ranked Controls is currently limited
here, at the moment the current value will be used directly. Writing
the current value directly is valid as per the specification
although the synchronicity of updates across multiple registers is
lost. Support for this will probably need to be added later. But its a
fairly hard problem and doesn't need to be solved immediately.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250217140159.2288784-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Do some clean up for some define in header file.
Like change lower case in value, up case in define,
space add in recommends, change date of files and add author.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20250226144328.11645-1-baojun.xu@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When SPI is used for control, the driver must hold the SPI bus lock
while issuing the sequence of writes to perform a soft reset.
>From the time the driver writes the SYSTEM_RESET command until the
driver does a write to terminate the reset, there must not be any
activity on the SPI bus lines. If there is any SPI activity during the
soft-reset, another soft-reset will be triggered. The state of the SPI
chip select is irrelevant.
A repeated soft-reset does not in itself cause any problems, and it is
not an infinite loop. The problem is a race between these resets and
the driver polling for boot completion. There is a time window between
soft resets where the driver could read HALO_STATE as 2 (fully booted)
while the chip is actually soft-resetting. Although this window is
small, it is long enough that it is possible to hit it in normal
operation.
To prevent this race and ensure the chip really is fully booted, the
driver calls spi_bus_lock() to prevent other activity while resetting.
It then issues the SYSTEM_RESET mailbox command. After allowing
sufficient time for reset to take effect, the driver issues a PING
mailbox command, which will force completion of the full soft-reset
sequence. The SPI bus lock can then be released. The mailbox is
checked for any boot or wakeup response from the firmware, before the
value in HALO_STATE will be trusted.
This does not affect SoundWire or I2C control.
Fixes: 8a731fd37f8b ("ASoC: cs35l56: Move utility functions to shared file")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250225131843.113752-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
To provide minimal support for multi-channel kcontrols i.e.: more than
stereo configuration, store the number of channels specified within the
SectionControlMixer. The field is part of the topology standard,
currently skipped by the ASoC core.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250217102115.3539427-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
dpcm_process_paths() will call dpcm_add_paths() (A) or
dpcm_prune_paths() (B)
dpcm_process_paths(..., new)
{
if (new)
(A) return dpcm_add_paths(...);
else
(B) return dpcm_prune_paths(...);
}
but the user who need to call dpcm_prune_paths() (B) is only
soc_dpcm_fe_runtime_update(), all other user want to call is
dpcm_add_paths() (A). We don't need to have confusing
dpcm_process_paths(). Let's remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87jz9vyjyu.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
snd_soc_card :: update is used only for passing parameters to
dapm_widget_update() like below.
card->update = update;
ret = soc_dapm_xxx(card, ...);
card->update = NULL;
Let's passing it via function parameter and remove update from
snd_soc_card.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87ldubyjz9.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
No one uses dpcm_dapm_stream_event() return value, and it always
return 0. Let's makes it void.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87seojyk6m.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
soc-core.c only calls snd_soc_set_dmi_name(), so we don't need to have
EXPORT_SYMBOL_GPL() for it. Let's makes it local function.
No one uses *flavour parameter, let's remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87v7tfyk7b.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for parsing the Power Domain Entity properties from
DisCo/ACPI.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250205113801.3699902-11-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for parsing the Clock Source Entity properties from
DisCo/ACPI.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250205113801.3699902-10-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for parsing the Input/Output Terminal Entity properties from
DisCo/ACPI.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250205113801.3699902-9-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Within SDCA collections of Channels are referred to as Clusters, each
Channel within a Cluster can have various properties attached to it.
For example a stereo audio stream, would have a Cluster with 2 Channels
one marked as left and the other as right. Various Clusters are
specified in DisCo/ACPI and controls then allow the class driver to
select between these channel configurations. Add support for parsing
these Cluster definitions.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250205113801.3699902-8-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
DisCo/SDCA contains small buffers of data that hold ranges of valid
values for the various SDCA Controls. Add support for parsing these
from ACPI.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250205113801.3699902-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Each SDCA Entity will contain a number of Controls, these are
basically equivalent to registers. Although a single Control will only
ever contain a single field. Some of these would map directly to ALSA
controls once more of the SDCA class driver is implemented. These
controls are parsed out of the DisCo ACPI tables.
One small todo here is that each Control can have multiple
sub-entries (Control Numbers), these are typically used to represent
channels. Whilst support is present for these, currently the
ACPI properties that would allow differing defaults for each channel
are not parsed. But there is nothing here that should prevent that
being added in the future.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250205113801.3699902-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Within SDCA there is a special Entity called Entity 0 which is used
to hold Function level controls. Whilst Entity 0 isn't a full SDCA
Entity, it is helpful to add an sdca_entity structure for it. This
will allow it to be treated identically in the code that handles
SDCA Controls.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250205113801.3699902-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Each SDCA Function may contain a table of register writes that should be
written out before the Function is used. Add code to parse this table
from the DisCo tables in ACPI.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250205113801.3699902-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
