| Age | Commit message (Collapse) | Author |
|---|
|
Extend the futex2 interface to be aware of mempolicy.
When FUTEX2_MPOL is specified and there is a MPOL_PREFERRED or
home_node specified covering the futex address, use that hash-map.
Notably, in this case the futex will go to the global node hashtable,
even if it is a PRIVATE futex.
When FUTEX2_NUMA|FUTEX2_MPOL is specified and the user specified node
value is FUTEX_NO_NODE, the MPOL lookup (as described above) will be
tried first before reverting to setting node to the local node.
[bigeasy: add CONFIG_FUTEX_MPOL, add MPOL to FUTEX2_VALID_MASK, write
the node only to user if FUTEX_NO_NODE was supplied]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250416162921.513656-18-bigeasy@linutronix.de
|
|
Extend the futex2 interface to be numa aware.
When FUTEX2_NUMA is specified for a futex, the user value is extended
to two words (of the same size). The first is the user value we all
know, the second one will be the node to place this futex on.
struct futex_numa_32 {
u32 val;
u32 node;
};
When node is set to ~0, WAIT will set it to the current node_id such
that WAKE knows where to find it. If userspace corrupts the node value
between WAIT and WAKE, the futex will not be found and no wakeup will
happen.
When FUTEX2_NUMA is not set, the node is simply an extension of the
hash, such that traditional futexes are still interleaved over the
nodes.
This is done to avoid having to have a separate !numa hash-table.
[bigeasy: ensure to have at least hashsize of 4 in futex_init(), add
pr_info() for size and allocation information. Cast the naddr math to
void*]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250416162921.513656-17-bigeasy@linutronix.de
|
|
My initial testing showed that:
perf bench futex hash
reported less operations/sec with private hash. After using the same
amount of buckets in the private hash as used by the global hash then
the operations/sec were about the same.
This changed once the private hash became resizable. This feature added
an RCU section and reference counting via atomic inc+dec operation into
the hot path.
The reference counting can be avoided if the private hash is made
immutable.
Extend PR_FUTEX_HASH_SET_SLOTS by a fourth argument which denotes if the
private should be made immutable. Once set (to true) the a further
resize is not allowed (same if set to global hash).
Add PR_FUTEX_HASH_GET_IMMUTABLE which returns true if the hash can not
be changed.
Update "perf bench" suite.
For comparison, results of "perf bench futex hash -s":
- Xeon CPU E5-2650, 2 NUMA nodes, total 32 CPUs:
- Before the introducing task local hash
shared Averaged 1.487.148 operations/sec (+- 0,53%), total secs = 10
private Averaged 2.192.405 operations/sec (+- 0,07%), total secs = 10
- With the series
shared Averaged 1.326.342 operations/sec (+- 0,41%), total secs = 10
-b128 Averaged 141.394 operations/sec (+- 1,15%), total secs = 10
-Ib128 Averaged 851.490 operations/sec (+- 0,67%), total secs = 10
-b8192 Averaged 131.321 operations/sec (+- 2,13%), total secs = 10
-Ib8192 Averaged 1.923.077 operations/sec (+- 0,61%), total secs = 10
128 is the default allocation of hash buckets.
8192 was the previous amount of allocated hash buckets.
- Xeon(R) CPU E7-8890 v3, 4 NUMA nodes, total 144 CPUs:
- Before the introducing task local hash
shared Averaged 1.810.936 operations/sec (+- 0,26%), total secs = 20
private Averaged 2.505.801 operations/sec (+- 0,05%), total secs = 20
- With the series
shared Averaged 1.589.002 operations/sec (+- 0,25%), total secs = 20
-b1024 Averaged 42.410 operations/sec (+- 0,20%), total secs = 20
-Ib1024 Averaged 740.638 operations/sec (+- 1,51%), total secs = 20
-b65536 Averaged 48.811 operations/sec (+- 1,35%), total secs = 20
-Ib65536 Averaged 1.963.165 operations/sec (+- 0,18%), total secs = 20
1024 is the default allocation of hash buckets.
65536 was the previous amount of allocated hash buckets.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Link: https://lore.kernel.org/r/20250416162921.513656-16-bigeasy@linutronix.de
|
|
The mm_struct::futex_hash_lock guards the futex_hash_bucket assignment/
replacement. The futex_hash_allocate()/ PR_FUTEX_HASH_SET_SLOTS
operation can now be invoked at runtime and resize an already existing
internal private futex_hash_bucket to another size.
The reallocation is based on an idea by Thomas Gleixner: The initial
allocation of struct futex_private_hash sets the reference count
to one. Every user acquires a reference on the local hash before using
it and drops it after it enqueued itself on the hash bucket. There is no
reference held while the task is scheduled out while waiting for the
wake up.
The resize process allocates a new struct futex_private_hash and drops
the initial reference. Synchronized with mm_struct::futex_hash_lock it
is checked if the reference counter for the currently used
mm_struct::futex_phash is marked as DEAD. If so, then all users enqueued
on the current private hash are requeued on the new private hash and the
new private hash is set to mm_struct::futex_phash. Otherwise the newly
allocated private hash is saved as mm_struct::futex_phash_new and the
rehashing and reassigning is delayed to the futex_hash() caller once the
reference counter is marked DEAD.
The replacement is not performed at rcuref_put() time because certain
callers, such as futex_wait_queue(), drop their reference after changing
the task state. This change will be destroyed once the futex_hash_lock
is acquired.
The user can change the number slots with PR_FUTEX_HASH_SET_SLOTS
multiple times. An increase and decrease is allowed and request blocks
until the assignment is done.
The private hash allocated at thread creation is changed from 16 to
16 <= 4 * number_of_threads <= global_hash_size
where number_of_threads can not exceed the number of online CPUs. Should
the user PR_FUTEX_HASH_SET_SLOTS then the auto scaling is disabled.
[peterz: reorganize the code to avoid state tracking and simplify new
object handling, block the user until changes are in effect, allow
increase and decrease of the hash].
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250416162921.513656-15-bigeasy@linutronix.de
|
|
Allocate a private futex hash with 16 slots if a task forks its first
thread.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250416162921.513656-14-bigeasy@linutronix.de
|
|
The futex hash is system wide and shared by all tasks. Each slot
is hashed based on futex address and the VMA of the thread. Due to
randomized VMAs (and memory allocations) the same logical lock (pointer)
can end up in a different hash bucket on each invocation of the
application. This in turn means that different applications may share a
hash bucket on the first invocation but not on the second and it is not
always clear which applications will be involved. This can result in
high latency's to acquire the futex_hash_bucket::lock especially if the
lock owner is limited to a CPU and can not be effectively PI boosted.
Introduce basic infrastructure for process local hash which is shared by
all threads of process. This hash will only be used for a
PROCESS_PRIVATE FUTEX operation.
The hashmap can be allocated via:
prctl(PR_FUTEX_HASH, PR_FUTEX_HASH_SET_SLOTS, num);
A `num' of 0 means that the global hash is used instead of a private
hash.
Other values for `num' specify the number of slots for the hash and the
number must be power of two, starting with two.
The prctl() returns zero on success. This function can only be used
before a thread is created.
The current status for the private hash can be queried via:
num = prctl(PR_FUTEX_HASH, PR_FUTEX_HASH_GET_SLOTS);
which return the current number of slots. The value 0 means that the
global hash is used. Values greater than 0 indicate the number of slots
that are used. A negative number indicates an error.
For optimisation, for the private hash jhash2() uses only two arguments
the address and the offset. This omits the VMA which is always the same.
[peterz: Use 0 for global hash. A bit shuffling and renaming. ]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250416162921.513656-13-bigeasy@linutronix.de
|
|
Factor out the futex_hash_bucket initialisation into a helpr function.
The helper function will be used in a follow up patch implementing
process private hash buckets.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250416162921.513656-12-bigeasy@linutronix.de
|
|
futex_lock_pi() and __fixup_pi_state_owner() acquire the
futex_q::lock_ptr without holding a reference assuming the previously
obtained hash bucket and the assigned lock_ptr are still valid. This
isn't the case once the private hash can be resized and becomes invalid
after the reference drop.
Introduce futex_q_lockptr_lock() to lock the hash bucket recorded in
futex_q::lock_ptr. The lock pointer is read in a RCU section to ensure
that it does not go away if the hash bucket has been replaced and the
old pointer has been observed. After locking the pointer needs to be
compared to check if it changed. If so then the hash bucket has been
replaced and the user has been moved to the new one and lock_ptr has
been updated. The lock operation needs to be redone in this case.
The locked hash bucket is not returned.
A special case is an early return in futex_lock_pi() (due to signal or
timeout) and a successful futex_wait_requeue_pi(). In both cases a valid
futex_q::lock_ptr is expected (and its matching hash bucket) but since
the waiter has been removed from the hash this can no longer be
guaranteed. Therefore before the waiter is removed and a reference is
acquired which is later dropped by the waiter to avoid a resize.
Add futex_q_lockptr_lock() and use it.
Acquire an additional reference in requeue_pi_wake_futex() and
futex_unlock_pi() while the futex_q is removed, denote this extra
reference in futex_q::drop_hb_ref and let the waiter drop the reference
in this case.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250416162921.513656-11-bigeasy@linutronix.de
|
|
To support runtime resizing of the process private hash, it's required
to not use the obtained hash bucket once the reference count has been
dropped. The reference will be dropped after the unlock of the hash
bucket.
The amount of waiters is decremented after the unlock operation. There
is no requirement that this needs to happen after the unlock. The
increment happens before acquiring the lock to signal early that there
will be a waiter. The waiter can avoid blocking on the lock if it is
known that there will be no waiter.
There is no difference in terms of ordering if the decrement happens
before or after the unlock.
Decrease the waiter count before the unlock operation.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250416162921.513656-10-bigeasy@linutronix.de
|
|
This gets us:
fph = futex_private_hash(key) /* gets fph and inc users */
futex_private_hash_get(fph) /* inc users */
futex_private_hash_put(fph) /* dec users */
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250416162921.513656-8-bigeasy@linutronix.de
|
|
This gets us:
hb = futex_hash(key) /* gets hb and inc users */
futex_hash_get(hb) /* inc users */
futex_hash_put(hb) /* dec users */
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250416162921.513656-7-bigeasy@linutronix.de
|
|
Create explicit scopes for hb variables; almost pure re-indent.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250416162921.513656-6-bigeasy@linutronix.de
|
|
Getting the hash bucket and queuing it are two distinct actions. In
light of wanting to add a put hash bucket function later, untangle
them.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250416162921.513656-5-bigeasy@linutronix.de
|
|
The global hash uses futex_hashsize to save the amount of the hash
buckets that have been allocated during system boot. On each
futex_hash() invocation this number is substracted by one to get the
mask. This can be optimized by saving directly the mask avoiding the
substraction on each futex_hash() invocation.
Rename futex_hashsize to futex_hashmask and save the mask of the
allocated hash map.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Waiman Long <longman@redhat.com>
Link: https://lore.kernel.org/all/20250226091057.bX8vObR4@linutronix.de
|
|
futex_queue() -> __futex_queue() uses 'current' as the task to store in
the struct futex_q->task field. This is fine for synchronous usage of
the futex infrastructure, but it's not always correct when used by
io_uring where the task doing the initial futex_queue() might not be
available later on. This doesn't lead to any issues currently, as the
io_uring side doesn't support PI futexes, but it does leave a
potentially dangling pointer which is never a good idea.
Have futex_queue() take a task_struct argument, and have the regular
callers pass in 'current' for that. Meanwhile io_uring can just pass in
NULL, as the task should never be used off that path. In theory
req->tctx->task could be used here, but there's no point populating it
with a task field that will never be used anyway.
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/22484a23-542c-4003-b721-400688a0d055@kernel.dk
|
|
Josh Poimboeuf reports that he got a "will-it-scale.per_process_ops 1.9%
improvement" report for his patch that changed __get_user() to use
pointer masking instead of the explicit speculation barrier. However,
that patch doesn't actually work in the general case, because some (very
bad) architecture-specific code actually depends on __get_user() also
working on kernel addresses.
A profile showed that the offending __get_user() was the futex code,
which really should be fixed up to not use that horrid legacy case.
Rewrite futex_get_value_locked() to use the modern user acccess helpers,
and inline it so that the compiler not only avoids the function call for
a few instructions, but can do CSE on the address masking.
It also turns out the x86 futex functions have unnecessary barriers in
other places, so let's fix those up too.
Link: https://lore.kernel.org/all/20241115230653.hfvzyf3aqqntgp63@jpoimboe/
Reported-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- The series "zram: optimal post-processing target selection" from
Sergey Senozhatsky improves zram's post-processing selection
algorithm. This leads to improved memory savings.
- Wei Yang has gone to town on the mapletree code, contributing several
series which clean up the implementation:
- "refine mas_mab_cp()"
- "Reduce the space to be cleared for maple_big_node"
- "maple_tree: simplify mas_push_node()"
- "Following cleanup after introduce mas_wr_store_type()"
- "refine storing null"
- The series "selftests/mm: hugetlb_fault_after_madv improvements" from
David Hildenbrand fixes this selftest for s390.
- The series "introduce pte_offset_map_{ro|rw}_nolock()" from Qi Zheng
implements some rationaizations and cleanups in the page mapping
code.
- The series "mm: optimize shadow entries removal" from Shakeel Butt
optimizes the file truncation code by speeding up the handling of
shadow entries.
- The series "Remove PageKsm()" from Matthew Wilcox completes the
migration of this flag over to being a folio-based flag.
- The series "Unify hugetlb into arch_get_unmapped_area functions" from
Oscar Salvador implements a bunch of consolidations and cleanups in
the hugetlb code.
- The series "Do not shatter hugezeropage on wp-fault" from Dev Jain
takes away the wp-fault time practice of turning a huge zero page
into small pages. Instead we replace the whole thing with a THP. More
consistent cleaner and potentiall saves a large number of pagefaults.
- The series "percpu: Add a test case and fix for clang" from Andy
Shevchenko enhances and fixes the kernel's built in percpu test code.
- The series "mm/mremap: Remove extra vma tree walk" from Liam Howlett
optimizes mremap() by avoiding doing things which we didn't need to
do.
- The series "Improve the tmpfs large folio read performance" from
Baolin Wang teaches tmpfs to copy data into userspace at the folio
size rather than as individual pages. A 20% speedup was observed.
- The series "mm/damon/vaddr: Fix issue in
damon_va_evenly_split_region()" fro Zheng Yejian fixes DAMON
splitting.
- The series "memcg-v1: fully deprecate charge moving" from Shakeel
Butt removes the long-deprecated memcgv2 charge moving feature.
- The series "fix error handling in mmap_region() and refactor" from
Lorenzo Stoakes cleanup up some of the mmap() error handling and
addresses some potential performance issues.
- The series "x86/module: use large ROX pages for text allocations"
from Mike Rapoport teaches x86 to use large pages for
read-only-execute module text.
- The series "page allocation tag compression" from Suren Baghdasaryan
is followon maintenance work for the new page allocation profiling
feature.
- The series "page->index removals in mm" from Matthew Wilcox remove
most references to page->index in mm/. A slow march towards shrinking
struct page.
- The series "damon/{self,kunit}tests: minor fixups for DAMON debugfs
interface tests" from Andrew Paniakin performs maintenance work for
DAMON's self testing code.
- The series "mm: zswap swap-out of large folios" from Kanchana Sridhar
improves zswap's batching of compression and decompression. It is a
step along the way towards using Intel IAA hardware acceleration for
this zswap operation.
- The series "kasan: migrate the last module test to kunit" from
Sabyrzhan Tasbolatov completes the migration of the KASAN built-in
tests over to the KUnit framework.
- The series "implement lightweight guard pages" from Lorenzo Stoakes
permits userapace to place fault-generating guard pages within a
single VMA, rather than requiring that multiple VMAs be created for
this. Improved efficiencies for userspace memory allocators are
expected.
- The series "memcg: tracepoint for flushing stats" from JP Kobryn uses
tracepoints to provide increased visibility into memcg stats flushing
activity.
- The series "zram: IDLE flag handling fixes" from Sergey Senozhatsky
fixes a zram buglet which potentially affected performance.
- The series "mm: add more kernel parameters to control mTHP" from
Maíra Canal enhances our ability to control/configuremultisize THP
from the kernel boot command line.
- The series "kasan: few improvements on kunit tests" from Sabyrzhan
Tasbolatov has a couple of fixups for the KASAN KUnit tests.
- The series "mm/list_lru: Split list_lru lock into per-cgroup scope"
from Kairui Song optimizes list_lru memory utilization when lockdep
is enabled.
* tag 'mm-stable-2024-11-18-19-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (215 commits)
cma: enforce non-zero pageblock_order during cma_init_reserved_mem()
mm/kfence: add a new kunit test test_use_after_free_read_nofault()
zram: fix NULL pointer in comp_algorithm_show()
memcg/hugetlb: add hugeTLB counters to memcg
vmstat: call fold_vm_zone_numa_events() before show per zone NUMA event
mm: mmap_lock: check trace_mmap_lock_$type_enabled() instead of regcount
zram: ZRAM_DEF_COMP should depend on ZRAM
MAINTAINERS/MEMORY MANAGEMENT: add document files for mm
Docs/mm/damon: recommend academic papers to read and/or cite
mm: define general function pXd_init()
kmemleak: iommu/iova: fix transient kmemleak false positive
mm/list_lru: simplify the list_lru walk callback function
mm/list_lru: split the lock to per-cgroup scope
mm/list_lru: simplify reparenting and initial allocation
mm/list_lru: code clean up for reparenting
mm/list_lru: don't export list_lru_add
mm/list_lru: don't pass unnecessary key parameters
kasan: add kunit tests for kmalloc_track_caller, kmalloc_node_track_caller
kasan: change kasan_atomics kunit test as KUNIT_CASE_SLOW
kasan: use EXPORT_SYMBOL_IF_KUNIT to export symbols
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"A rather large update for timekeeping and timers:
- The final step to get rid of auto-rearming posix-timers
posix-timers are currently auto-rearmed by the kernel when the
signal of the timer is ignored so that the timer signal can be
delivered once the corresponding signal is unignored.
This requires to throttle the timer to prevent a DoS by small
intervals and keeps the system pointlessly out of low power states
for no value. This is a long standing non-trivial problem due to
the lock order of posix-timer lock and the sighand lock along with
life time issues as the timer and the sigqueue have different life
time rules.
Cure this by:
- Embedding the sigqueue into the timer struct to have the same
life time rules. Aside of that this also avoids the lookup of
the timer in the signal delivery and rearm path as it's just a
always valid container_of() now.
- Queuing ignored timer signals onto a seperate ignored list.
- Moving queued timer signals onto the ignored list when the
signal is switched to SIG_IGN before it could be delivered.
- Walking the ignored list when SIG_IGN is lifted and requeue the
signals to the actual signal lists. This allows the signal
delivery code to rearm the timer.
This also required to consolidate the signal delivery rules so they
are consistent across all situations. With that all self test
scenarios finally succeed.
- Core infrastructure for VFS multigrain timestamping
This is required to allow the kernel to use coarse grained time
stamps by default and switch to fine grained time stamps when inode
attributes are actively observed via getattr().
These changes have been provided to the VFS tree as well, so that
the VFS specific infrastructure could be built on top.
- Cleanup and consolidation of the sleep() infrastructure
- Move all sleep and timeout functions into one file
- Rework udelay() and ndelay() into proper documented inline
functions and replace the hardcoded magic numbers by proper
defines.
- Rework the fsleep() implementation to take the reality of the
timer wheel granularity on different HZ values into account.
Right now the boundaries are hard coded time ranges which fail
to provide the requested accuracy on different HZ settings.
- Update documentation for all sleep/timeout related functions
and fix up stale documentation links all over the place
- Fixup a few usage sites
- Rework of timekeeping and adjtimex(2) to prepare for multiple PTP
clocks
A system can have multiple PTP clocks which are participating in
seperate and independent PTP clock domains. So far the kernel only
considers the PTP clock which is based on CLOCK TAI relevant as
that's the clock which drives the timekeeping adjustments via the
various user space daemons through adjtimex(2).
The non TAI based clock domains are accessible via the file
descriptor based posix clocks, but their usability is very limited.
They can't be accessed fast as they always go all the way out to
the hardware and they cannot be utilized in the kernel itself.
As Time Sensitive Networking (TSN) gains traction it is required to
provide fast user and kernel space access to these clocks.
The approach taken is to utilize the timekeeping and adjtimex(2)
infrastructure to provide this access in a similar way how the
kernel provides access to clock MONOTONIC, REALTIME etc.
Instead of creating a duplicated infrastructure this rework
converts timekeeping and adjtimex(2) into generic functionality
which operates on pointers to data structures instead of using
static variables.
This allows to provide time accessors and adjtimex(2) functionality
for the independent PTP clocks in a subsequent step.
- Consolidate hrtimer initialization
hrtimers are set up by initializing the data structure and then
seperately setting the callback function for historical reasons.
That's an extra unnecessary step and makes Rust support less
straight forward than it should be.
Provide a new set of hrtimer_setup*() functions and convert the
core code and a few usage sites of the less frequently used
interfaces over.
The bulk of the htimer_init() to hrtimer_setup() conversion is
already prepared and scheduled for the next merge window.
- Drivers:
- Ensure that the global timekeeping clocksource is utilizing the
cluster 0 timer on MIPS multi-cluster systems.
Otherwise CPUs on different clusters use their cluster specific
clocksource which is not guaranteed to be synchronized with
other clusters.
- Mostly boring cleanups, fixes, improvements and code movement"
* tag 'timers-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (140 commits)
posix-timers: Fix spurious warning on double enqueue versus do_exit()
clocksource/drivers/arm_arch_timer: Use of_property_present() for non-boolean properties
clocksource/drivers/gpx: Remove redundant casts
clocksource/drivers/timer-ti-dm: Fix child node refcount handling
dt-bindings: timer: actions,owl-timer: convert to YAML
clocksource/drivers/ralink: Add Ralink System Tick Counter driver
clocksource/drivers/mips-gic-timer: Always use cluster 0 counter as clocksource
clocksource/drivers/timer-ti-dm: Don't fail probe if int not found
clocksource/drivers:sp804: Make user selectable
clocksource/drivers/dw_apb: Remove unused dw_apb_clockevent functions
hrtimers: Delete hrtimer_init_on_stack()
alarmtimer: Switch to use hrtimer_setup() and hrtimer_setup_on_stack()
io_uring: Switch to use hrtimer_setup_on_stack()
sched/idle: Switch to use hrtimer_setup_on_stack()
hrtimers: Delete hrtimer_init_sleeper_on_stack()
wait: Switch to use hrtimer_setup_sleeper_on_stack()
timers: Switch to use hrtimer_setup_sleeper_on_stack()
net: pktgen: Switch to use hrtimer_setup_sleeper_on_stack()
futex: Switch to use hrtimer_setup_sleeper_on_stack()
fs/aio: Switch to use hrtimer_setup_sleeper_on_stack()
...
|
|
There are several places which currently open-code page_pgoff(), convert
them to call it.
Link: https://lkml.kernel.org/r/20241005200121.3231142-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
hrtimer_setup_sleeper_on_stack() replaces hrtimer_init_sleeper_on_stack()
to keep the naming convention consistent.
Convert the usage site over to it. The conversion was done with Coccinelle.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/d92116a17313dee283ebc959869bea80fbf94cdb.1730386209.git.namcao@linutronix.de
|
|
Optimize get_inode_sequence_number() to use simpler and faster:
!atomic64_try_cmpxchg_relaxed(*ptr, &old, new)
instead of:
atomic64_cmpxchg relaxed(*ptr, old, new) != old
The x86 CMPXCHG instruction returns success in ZF flag, so
this change saves a compare after cmpxchg. The generated
code improves from:
3da: 31 c0 xor %eax,%eax
3dc: f0 48 0f b1 8a 38 01 lock cmpxchg %rcx,0x138(%rdx)
3e3: 00 00
3e5: 48 85 c0 test %rax,%rax
3e8: 48 0f 44 c1 cmove %rcx,%rax
to:
3da: 31 c0 xor %eax,%eax
3dc: f0 48 0f b1 8a 38 01 lock cmpxchg %rcx,0x138(%rdx)
3e3: 00 00
3e5: 48 0f 44 c1 cmove %rcx,%rax
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/all/20241010071023.21913-2-ubizjak@gmail.com
|
|
Use atomic64_inc_return(&ref) instead of atomic64_add_return(1, &ref)
to use optimized implementation and ease register pressure around
the primitive for targets that implement optimized variant.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/all/20241010071023.21913-1-ubizjak@gmail.com
|
|
The fault-inject.h users across the kernel need to add a lot of #ifdef
CONFIG_FAULT_INJECTION to cater for shortcomings in the header. Make
fault-inject.h self-contained for CONFIG_FAULT_INJECTION=n, and add stubs
for DECLARE_FAULT_ATTR(), setup_fault_attr(), should_fail_ex(), and
should_fail() to allow removal of conditional compilation.
[akpm@linux-foundation.org: repair fallout from no longer including debugfs.h into fault-inject.h]
[akpm@linux-foundation.org: fix drivers/misc/xilinx_tmr_inject.c]
[akpm@linux-foundation.org: Add debugfs.h inclusion to more files, per Stephen]
Link: https://lkml.kernel.org/r/20240813121237.2382534-1-jani.nikula@intel.com
Fixes: 6ff1cb355e62 ("[PATCH] fault-injection capabilities infrastructure")
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
CONFIG_BASE_SMALL is currently a type int but is only used as a boolean.
So, change its type to bool and adapt all usages:
CONFIG_BASE_SMALL == 0 becomes !IS_ENABLED(CONFIG_BASE_SMALL) and
CONFIG_BASE_SMALL != 0 becomes IS_ENABLED(CONFIG_BASE_SMALL).
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Yoann Congal <yoann.congal@smile.fr>
Link: https://lore.kernel.org/r/20240505080343.1471198-3-yoann.congal@smile.fr
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
Jiri Slaby reported a futex state inconsistency resulting in -EINVAL during
a lock operation for a PI futex. It requires that the a lock process is
interrupted by a timeout or signal:
T1 Owns the futex in user space.
T2 Tries to acquire the futex in kernel (futex_lock_pi()). Allocates a
pi_state and attaches itself to it.
T2 Times out and removes its rt_waiter from the rt_mutex. Drops the
rtmutex lock and tries to acquire the hash bucket lock to remove
the futex_q. The lock is contended and T2 schedules out.
T1 Unlocks the futex (futex_unlock_pi()). Finds a futex_q but no
rt_waiter. Unlocks the futex (do_uncontended) and makes it available
to user space.
T3 Acquires the futex in user space.
T4 Tries to acquire the futex in kernel (futex_lock_pi()). Finds the
existing futex_q of T2 and tries to attach itself to the existing
pi_state. This (attach_to_pi_state()) fails with -EINVAL because uval
contains the TID of T3 but pi_state points to T1.
It's incorrect to unlock the futex and make it available for user space to
acquire as long as there is still an existing state attached to it in the
kernel.
T1 cannot hand over the futex to T2 because T2 already gave up and started
to clean up and is blocked on the hash bucket lock, so T2's futex_q with
the pi_state pointing to T1 is still queued.
T2 observes the futex_q, but ignores it as there is no waiter on the
corresponding rt_mutex and takes the uncontended path which allows the
subsequent caller of futex_lock_pi() (T4) to observe that stale state.
To prevent this the unlock path must dequeue all futex_q entries which
point to the same pi_state when there is no waiter on the rt mutex. This
requires obviously to make the dequeue conditional in the locking path to
prevent a double dequeue. With that it's guaranteed that user space cannot
observe an uncontended futex which has kernel state attached.
Fixes: fbeb558b0dd0d ("futex/pi: Fix recursive rt_mutex waiter state")
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20240118115451.0TkD_ZhB@linutronix.de
Closes: https://lore.kernel.org/all/4611bcf2-44d0-4c34-9b84-17406f881003@kernel.org
|
|
Trimming down sched.h dependencies: we don't want to include more than
the base types.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Xi reported that commit 5694289ce183 ("futex: Flag conversion") broke
glibc's robust futex tests.
This was narrowed down to the change of FLAGS_SHARED from 0x01 to
0x10, at which point Florian noted that handle_futex_death() has a
hardcoded flags argument of 1.
Change this to: FLAGS_SIZE_32 | FLAGS_SHARED, matching how
futex_to_flags() unconditionally sets FLAGS_SIZE_32 for all legacy
futex ops.
Reported-by: Xi Ruoyao <xry111@xry111.site>
Reported-by: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20231114201402.GA25315@noisy.programming.kicks-ass.net
Fixes: 5694289ce183 ("futex: Flag conversion")
Cc: <stable@vger.kernel.org>
|
|
On no-MMU, all futexes are treated as private because there is no need
to map a virtual address to physical to match the futex across
processes. This doesn't quite work though, because private futexes
include the current process's mm_struct as part of their key. This makes
it impossible for one process to wake up a shared futex being waited on
in another process.
Fix this bug by excluding the mm_struct from the key. With
a single address space, the futex address is already a unique key.
Fixes: 784bdf3bb694 ("futex: Assume all mappings are private on !MMU systems")
Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/r/20231019204548.1236437-2-ben.wolsieffer@hefring.com
|
|
Instead of only passing FLAGS_SHARED as a boolean, pass down flags as
a whole.
No functional change intended.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230921105248.282857501@noisy.programming.kicks-ass.net
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The futex code already handles compound pages correctly, but using a folio
tells the compiler that there is already a reference to the head page and
it doesn't need to call compound_head() again.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230821142207.2537124-1-willy@infradead.org
|
|
HASH_SMALL only works when parameter numentries is 0. But the sole caller
futex_init() never calls alloc_large_system_hash() with numentries set to
0. So HASH_SMALL is obsolete and remove it.
Link: https://lkml.kernel.org/r/20230625021323.849147-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: André Almeida <andrealmeid@igalia.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit ca16d5bee598 ("futex: Prevent robust futex exit race") addressed
two cases when tasks waiting on a robust non-PI futex remained blocked
despite the futex not being owned anymore:
* if the owner died after writing zero to the futex word, but before
waking up a waiter
* if a task waiting on the futex was woken up, but died before updating
the futex word (effectively swallowing the notification without acting
on it)
In the second case, the task could be woken up either by the previous
owner (after the futex word was reset to zero) or by the kernel (after
the OWNER_DIED bit was set and the TID part of the futex word was reset
to zero) if the previous owner died without the resetting the futex.
Because the referenced commit wakes up a potential waiter only if the
whole futex word is zero, the latter subcase remains unaddressed.
Fix this by looking only at the TID part of the futex when deciding
whether a wake up is needed.
Fixes: ca16d5bee598 ("futex: Prevent robust futex exit race")
Signed-off-by: Alexey Izbyshev <izbyshev@ispras.ru>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221111215439.248185-1-izbyshev@ispras.ru
|
|
invalidate_inode_page() is the only caller of invalidate_complete_page()
and inlining it reveals that the first check is unnecessary (because we
hold the page locked, and we just retrieved the mapping from the page).
Actually, it does make a difference, in that tail pages no longer fail
at this check, so it's now possible to remove a tail page from a mapping.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull signal/exit/ptrace updates from Eric Biederman:
"This set of changes deletes some dead code, makes a lot of cleanups
which hopefully make the code easier to follow, and fixes bugs found
along the way.
The end-game which I have not yet reached yet is for fatal signals
that generate coredumps to be short-circuit deliverable from
complete_signal, for force_siginfo_to_task not to require changing
userspace configured signal delivery state, and for the ptrace stops
to always happen in locations where we can guarantee on all
architectures that the all of the registers are saved and available on
the stack.
Removal of profile_task_ext, profile_munmap, and profile_handoff_task
are the big successes for dead code removal this round.
A bunch of small bug fixes are included, as most of the issues
reported were small enough that they would not affect bisection so I
simply added the fixes and did not fold the fixes into the changes
they were fixing.
There was a bug that broke coredumps piped to systemd-coredump. I
dropped the change that caused that bug and replaced it entirely with
something much more restrained. Unfortunately that required some
rebasing.
Some successes after this set of changes: There are few enough calls
to do_exit to audit in a reasonable amount of time. The lifetime of
struct kthread now matches the lifetime of struct task, and the
pointer to struct kthread is no longer stored in set_child_tid. The
flag SIGNAL_GROUP_COREDUMP is removed. The field group_exit_task is
removed. Issues where task->exit_code was examined with
signal->group_exit_code should been examined were fixed.
There are several loosely related changes included because I am
cleaning up and if I don't include them they will probably get lost.
The original postings of these changes can be found at:
https://lkml.kernel.org/r/87a6ha4zsd.fsf@email.froward.int.ebiederm.org
https://lkml.kernel.org/r/87bl1kunjj.fsf@email.froward.int.ebiederm.org
https://lkml.kernel.org/r/87r19opkx1.fsf_-_@email.froward.int.ebiederm.org
I trimmed back the last set of changes to only the obviously correct
once. Simply because there was less time for review than I had hoped"
* 'signal-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (44 commits)
ptrace/m68k: Stop open coding ptrace_report_syscall
ptrace: Remove unused regs argument from ptrace_report_syscall
ptrace: Remove second setting of PT_SEIZED in ptrace_attach
taskstats: Cleanup the use of task->exit_code
exit: Use the correct exit_code in /proc/<pid>/stat
exit: Fix the exit_code for wait_task_zombie
exit: Coredumps reach do_group_exit
exit: Remove profile_handoff_task
exit: Remove profile_task_exit & profile_munmap
signal: clean up kernel-doc comments
signal: Remove the helper signal_group_exit
signal: Rename group_exit_task group_exec_task
coredump: Stop setting signal->group_exit_task
signal: Remove SIGNAL_GROUP_COREDUMP
signal: During coredumps set SIGNAL_GROUP_EXIT in zap_process
signal: Make coredump handling explicit in complete_signal
signal: Have prepare_signal detect coredumps using signal->core_state
signal: Have the oom killer detect coredumps using signal->core_state
exit: Move force_uaccess back into do_exit
exit: Guarantee make_task_dead leaks the tsk when calling do_task_exit
...
|
|
The beginning of do_exit has become cluttered and difficult to read as
it is filled with checks to handle things that can only happen when
the kernel is operating improperly.
Now that we have a dedicated function for cleaning up a task when the
kernel is operating improperly move the checks there.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Now that all architectures have a working futex implementation in any
configuration, remove the runtime detection code.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Vineet Gupta <vgupta@kernel.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Link: https://lore.kernel.org/r/20211026100432.1730393-2-arnd@kernel.org
|
|
Move the wait/wake bits into their own file.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: André Almeida <andrealmeid@collabora.com>
Link: https://lore.kernel.org/r/20210923171111.300673-15-andrealmeid@collabora.com
|
|
Move all the requeue bits into their own file.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: André Almeida <andrealmeid@collabora.com>
Link: https://lore.kernel.org/r/20210923171111.300673-14-andrealmeid@collabora.com
|
|
In order to prepare introducing these symbols into the global
namespace; rename:
s/mark_wake_futex/futex_wake_mark/g
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: André Almeida <andrealmeid@collabora.com>
Link: https://lore.kernel.org/r/20210923171111.300673-13-andrealmeid@collabora.com
|
|
In order to prepare introducing these symbols into the global
namespace; rename:
s/match_futex/futex_match/g
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: André Almeida <andrealmeid@collabora.com>
Link: https://lore.kernel.org/r/20210923171111.300673-12-andrealmeid@collabora.com
|
|
In order to prepare introducing these symbols into the global
namespace; rename them:
s/hb_waiters_/futex_&/g
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: André Almeida <andrealmeid@collabora.com>
Link: https://lore.kernel.org/r/20210923171111.300673-11-andrealmeid@collabora.com
|
|
Move the PI futex implementation into it's own file.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: André Almeida <andrealmeid@collabora.com>
Link: https://lore.kernel.org/r/20210923171111.300673-10-andrealmeid@collabora.com
|
|
In order to prepare introducing these symbols into the global
namespace; rename them:
s/\<\([^_ ]*\)_futex_value_locked/futex_\1_value_locked/g
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: André Almeida <andrealmeid@collabora.com>
Link: https://lore.kernel.org/r/20210923171111.300673-9-andrealmeid@collabora.com
|
|
In order to prepare introducing these symbols into the global
namespace; rename:
s/hash_futex/futex_hash/g
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: André Almeida <andrealmeid@collabora.com>
Link: https://lore.kernel.org/r/20210923171111.300673-8-andrealmeid@collabora.com
|
|
In order to prepare introducing these symbols into the global
namespace; rename:
s/__unqueue_futex/__futex_unqueue/g
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: André Almeida <andrealmeid@collabora.com>
Link: https://lore.kernel.org/r/20210923171111.300673-7-andrealmeid@collabora.com
|
|
In order to prepare introducing these symbols into the global
namespace; rename them:
s/queue_\(un\)*lock/futex_q_\1lock/g
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: André Almeida <andrealmeid@collabora.com>
Link: https://lore.kernel.org/r/20210923171111.300673-6-andrealmeid@collabora.com
|
|
In order to prepare introducing these symbols into the global
namespace; rename them:
s/futex_wait_queue_me/futex_wait_queue/g
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: André Almeida <andrealmeid@collabora.com>
Link: https://lore.kernel.org/r/20210923171111.300673-5-andrealmeid@collabora.com
|
|
In order to prepare introducing these symbols into the global
namespace; rename them:
s/\<\(__\)*\(un\)*queue_me/\1futex_\2queue/g
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: André Almeida <andrealmeid@collabora.com>
Link: https://lore.kernel.org/r/20210923171111.300673-4-andrealmeid@collabora.com
|
|
Put the syscalls in their own little file.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: André Almeida <andrealmeid@collabora.com>
Link: https://lore.kernel.org/r/20210923171111.300673-3-andrealmeid@collabora.com
|
