| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth.
We didn't get netfilter or wireless PRs this week, so next week's PR
is probably going to be bigger. A healthy dose of fixes for bugs
introduced in the current release nonetheless.
Current release - regressions:
- Bluetooth: always allow SCO packets for user channel
- af_unix: fix memory leak in unix_dgram_sendmsg()
- rxrpc:
- remove redundant peer->mtu_lock causing lockdep splats
- fix spinlock flavor issues with the peer record hash
- eth: iavf: fix circular lock dependency with netdev_lock
- net: use rtnl_net_dev_lock() in
register_netdevice_notifier_dev_net() RDMA driver register notifier
after the device
Current release - new code bugs:
- ethtool: fix ioctl confusing drivers about desired HDS user config
- eth: ixgbe: fix media cage present detection for E610 device
Previous releases - regressions:
- loopback: avoid sending IP packets without an Ethernet header
- mptcp: reset connection when MPTCP opts are dropped after join
Previous releases - always broken:
- net: better track kernel sockets lifetime
- ipv6: fix dst ref loop on input in seg6 and rpl lw tunnels
- phy: qca807x: use right value from DTS for DAC_DSP_BIAS_CURRENT
- eth: enetc: number of error handling fixes
- dsa: rtl8366rb: reshuffle the code to fix config / build issue with
LED support"
* tag 'net-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
net: ti: icss-iep: Reject perout generation request
idpf: fix checksums set in idpf_rx_rsc()
selftests: drv-net: Check if combined-count exists
net: ipv6: fix dst ref loop on input in rpl lwt
net: ipv6: fix dst ref loop on input in seg6 lwt
usbnet: gl620a: fix endpoint checking in genelink_bind()
net/mlx5: IRQ, Fix null string in debug print
net/mlx5: Restore missing trace event when enabling vport QoS
net/mlx5: Fix vport QoS cleanup on error
net: mvpp2: cls: Fixed Non IP flow, with vlan tag flow defination.
af_unix: Fix memory leak in unix_dgram_sendmsg()
net: Handle napi_schedule() calls from non-interrupt
net: Clear old fragment checksum value in napi_reuse_skb
gve: unlink old napi when stopping a queue using queue API
net: Use rtnl_net_dev_lock() in register_netdevice_notifier_dev_net().
tcp: Defer ts_recent changes until req is owned
net: enetc: fix the off-by-one issue in enetc_map_tx_tso_buffs()
net: enetc: remove the mm_lock from the ENETC v4 driver
net: enetc: add missing enetc4_link_deinit()
net: enetc: update UDP checksum when updating originTimestamp field
...
|
|
Prevent a dst ref loop on input in rpl_iptunnel.
Fixes: a7a29f9c361f ("net: ipv6: add rpl sr tunnel")
Cc: Alexander Aring <alex.aring@gmail.com>
Cc: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Prevent a dst ref loop on input in seg6_iptunnel.
Fixes: af4a2209b134 ("ipv6: sr: use dst_cache in seg6_input")
Cc: David Lebrun <dlebrun@google.com>
Cc: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
After running the 'sendmsg02' program of Linux Test Project (LTP),
kmemleak reports the following memory leak:
# cat /sys/kernel/debug/kmemleak
unreferenced object 0xffff888243866800 (size 2048):
comm "sendmsg02", pid 67, jiffies 4294903166
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 5e 00 00 00 00 00 00 00 ........^.......
01 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00 ...@............
backtrace (crc 7e96a3f2):
kmemleak_alloc+0x56/0x90
kmem_cache_alloc_noprof+0x209/0x450
sk_prot_alloc.constprop.0+0x60/0x160
sk_alloc+0x32/0xc0
unix_create1+0x67/0x2b0
unix_create+0x47/0xa0
__sock_create+0x12e/0x200
__sys_socket+0x6d/0x100
__x64_sys_socket+0x1b/0x30
x64_sys_call+0x7e1/0x2140
do_syscall_64+0x54/0x110
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Commit 689c398885cc ("af_unix: Defer sock_put() to clean up path in
unix_dgram_sendmsg().") defers sock_put() in the error handling path.
However, it fails to account for the condition 'msg->msg_namelen != 0',
resulting in a memory leak when the code jumps to the 'lookup' label.
Fix issue by calling sock_put() if 'msg->msg_namelen != 0' is met.
Fixes: 689c398885cc ("af_unix: Defer sock_put() to clean up path in unix_dgram_sendmsg().")
Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Acked-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250225021457.1824-1-ahuang12@lenovo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
napi_schedule() is expected to be called either:
* From an interrupt, where raised softirqs are handled on IRQ exit
* From a softirq disabled section, where raised softirqs are handled on
the next call to local_bh_enable().
* From a softirq handler, where raised softirqs are handled on the next
round in do_softirq(), or further deferred to a dedicated kthread.
Other bare tasks context may end up ignoring the raised NET_RX vector
until the next random softirq handling opportunity, which may not
happen before a while if the CPU goes idle afterwards with the tick
stopped.
Such "misuses" have been detected on several places thanks to messages
of the kind:
"NOHZ tick-stop error: local softirq work is pending, handler #08!!!"
For example:
__raise_softirq_irqoff
__napi_schedule
rtl8152_runtime_resume.isra.0
rtl8152_resume
usb_resume_interface.isra.0
usb_resume_both
__rpm_callback
rpm_callback
rpm_resume
__pm_runtime_resume
usb_autoresume_device
usb_remote_wakeup
hub_event
process_one_work
worker_thread
kthread
ret_from_fork
ret_from_fork_asm
And also:
* drivers/net/usb/r8152.c::rtl_work_func_t
* drivers/net/netdevsim/netdev.c::nsim_start_xmit
There is a long history of issues of this kind:
019edd01d174 ("ath10k: sdio: Add missing BH locking around napi_schdule()")
330068589389 ("idpf: disable local BH when scheduling napi for marker packets")
e3d5d70cb483 ("net: lan78xx: fix "softirq work is pending" error")
e55c27ed9ccf ("mt76: mt7615: add missing bh-disable around rx napi schedule")
c0182aa98570 ("mt76: mt7915: add missing bh-disable around tx napi enable/schedule")
970be1dff26d ("mt76: disable BH around napi_schedule() calls")
019edd01d174 ("ath10k: sdio: Add missing BH locking around napi_schdule()")
30bfec4fec59 ("can: rx-offload: can_rx_offload_threaded_irq_finish(): add new function to be called from threaded interrupt")
e63052a5dd3c ("mlx5e: add add missing BH locking around napi_schdule()")
83a0c6e58901 ("i40e: Invoke softirqs after napi_reschedule")
bd4ce941c8d5 ("mlx4: Invoke softirqs after napi_reschedule")
8cf699ec849f ("mlx4: do not call napi_schedule() without care")
ec13ee80145c ("virtio_net: invoke softirqs after __napi_schedule")
This shows that relying on the caller to arrange a proper context for
the softirqs to be handled while calling napi_schedule() is very fragile
and error prone. Also fixing them can also prove challenging if the
caller may be called from different kinds of contexts.
Therefore fix this from napi_schedule() itself with waking up ksoftirqd
when softirqs are raised from task contexts.
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reported-by: Jakub Kicinski <kuba@kernel.org>
Reported-by: Francois Romieu <romieu@fr.zoreil.com>
Closes: https://lore.kernel.org/lkml/354a2690-9bbf-4ccb-8769-fa94707a9340@molgen.mpg.de/
Cc: Breno Leitao <leitao@debian.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250223221708.27130-1-frederic@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In certain cases, napi_get_frags() returns an skb that points to an old
received fragment, This skb may have its skb->ip_summed, csum, and other
fields set from previous fragment handling.
Some network drivers set skb->ip_summed to either CHECKSUM_COMPLETE or
CHECKSUM_UNNECESSARY when getting skb from napi_get_frags(), while
others only set skb->ip_summed when RX checksum offload is enabled on
the device, and do not set any value for skb->ip_summed when hardware
checksum offload is disabled, assuming that the skb->ip_summed
initiated to zero by napi_reuse_skb, ionic driver for example will
ignore/unset any value for the ip_summed filed if HW checksum offload is
disabled, and if we have a situation where the user disables the
checksum offload during a traffic that could lead to the following
errors shown in the kernel logs:
<IRQ>
dump_stack_lvl+0x34/0x48
__skb_gro_checksum_complete+0x7e/0x90
tcp6_gro_receive+0xc6/0x190
ipv6_gro_receive+0x1ec/0x430
dev_gro_receive+0x188/0x360
? ionic_rx_clean+0x25a/0x460 [ionic]
napi_gro_frags+0x13c/0x300
? __pfx_ionic_rx_service+0x10/0x10 [ionic]
ionic_rx_service+0x67/0x80 [ionic]
ionic_cq_service+0x58/0x90 [ionic]
ionic_txrx_napi+0x64/0x1b0 [ionic]
__napi_poll+0x27/0x170
net_rx_action+0x29c/0x370
handle_softirqs+0xce/0x270
__irq_exit_rcu+0xa3/0xc0
common_interrupt+0x80/0xa0
</IRQ>
This inconsistency sometimes leads to checksum validation issues in the
upper layers of the network stack.
To resolve this, this patch clears the skb->ip_summed value for each
reused skb in by napi_reuse_skb(), ensuring that the caller is responsible
for setting the correct checksum status. This eliminates potential
checksum validation issues caused by improper handling of
skb->ip_summed.
Fixes: 76620aafd66f ("gro: New frags interface to avoid copying shinfo")
Signed-off-by: Mohammad Heib <mheib@redhat.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250225112852.2507709-1-mheib@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Breno Leitao reported the splat below. [0]
Commit 65161fb544aa ("net: Fix dev_net(dev) race in
unregister_netdevice_notifier_dev_net().") added the
DEBUG_NET_WARN_ON_ONCE(), assuming that the netdev is not
registered before register_netdevice_notifier_dev_net().
But the assumption was simply wrong.
Let's use rtnl_net_dev_lock() in register_netdevice_notifier_dev_net().
[0]:
WARNING: CPU: 25 PID: 849 at net/core/dev.c:2150 register_netdevice_notifier_dev_net (net/core/dev.c:2150)
<TASK>
? __warn (kernel/panic.c:242 kernel/panic.c:748)
? register_netdevice_notifier_dev_net (net/core/dev.c:2150)
? register_netdevice_notifier_dev_net (net/core/dev.c:2150)
? report_bug (lib/bug.c:? lib/bug.c:219)
? handle_bug (arch/x86/kernel/traps.c:285)
? exc_invalid_op (arch/x86/kernel/traps.c:309)
? asm_exc_invalid_op (./arch/x86/include/asm/idtentry.h:621)
? register_netdevice_notifier_dev_net (net/core/dev.c:2150)
? register_netdevice_notifier_dev_net (./include/net/net_namespace.h:406 ./include/linux/netdevice.h:2663 net/core/dev.c:2144)
mlx5e_mdev_notifier_event+0x9f/0xf0 mlx5_ib
notifier_call_chain.llvm.12241336988804114627 (kernel/notifier.c:85)
blocking_notifier_call_chain (kernel/notifier.c:380)
mlx5_core_uplink_netdev_event_replay (drivers/net/ethernet/mellanox/mlx5/core/main.c:352)
mlx5_ib_roce_init.llvm.12447516292400117075+0x1c6/0x550 mlx5_ib
mlx5r_probe+0x375/0x6a0 mlx5_ib
? kernfs_put (./include/linux/instrumented.h:96 ./include/linux/atomic/atomic-arch-fallback.h:2278 ./include/linux/atomic/atomic-instrumented.h:1384 fs/kernfs/dir.c:557)
? auxiliary_match_id (drivers/base/auxiliary.c:174)
? mlx5r_mp_remove+0x160/0x160 mlx5_ib
really_probe (drivers/base/dd.c:? drivers/base/dd.c:658)
driver_probe_device (drivers/base/dd.c:830)
__driver_attach (drivers/base/dd.c:1217)
bus_for_each_dev (drivers/base/bus.c:369)
? driver_attach (drivers/base/dd.c:1157)
bus_add_driver (drivers/base/bus.c:679)
driver_register (drivers/base/driver.c:249)
Fixes: 7fb1073300a2 ("net: Hold rtnl_net_lock() in (un)?register_netdevice_notifier_dev_net().")
Reported-by: Breno Leitao <leitao@debian.org>
Closes: https://lore.kernel.org/netdev/20250224-noisy-cordial-roadrunner-fad40c@leitao/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Tested-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250225211023.96448-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull NFS client fixes from Anna Schumaker:
"Stable Fixes:
- O_DIRECT writes should adjust file length
Other Bugfixes:
- Adjust delegated timestamps for O_DIRECT reads and writes
- Prevent looping due to rpc_signal_task() races
- Fix a deadlock when recovering state on a sillyrenamed file
- Properly handle -ETIMEDOUT errors from tlshd
- Suppress build warnings for unused procfs functions
- Fix memory leak of lsm_contexts"
* tag 'nfs-for-6.14-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
lsm,nfs: fix memory leak of lsm_context
sunrpc: suppress warnings for unused procfs functions
SUNRPC: Handle -ETIMEDOUT return from tlshd
NFSv4: Fix a deadlock when recovering state on a sillyrenamed file
SUNRPC: Prevent looping due to rpc_signal_task() races
NFS: Adjust delegated timestamps for O_DIRECT reads and writes
NFS: O_DIRECT writes must check and adjust the file length
|
|
Recently a bug was discovered where the server had entered TCP_ESTABLISHED
state, but the upper layers were not notified.
The same 5-tuple packet may be processed by different CPUSs, so two
CPUs may receive different ack packets at the same time when the
state is TCP_NEW_SYN_RECV.
In that case, req->ts_recent in tcp_check_req may be changed concurrently,
which will probably cause the newsk's ts_recent to be incorrectly large.
So that tcp_validate_incoming will fail. At this point, newsk will not be
able to enter the TCP_ESTABLISHED.
cpu1 cpu2
tcp_check_req
tcp_check_req
req->ts_recent = rcv_tsval = t1
req->ts_recent = rcv_tsval = t2
syn_recv_sock
tcp_sk(child)->rx_opt.ts_recent = req->ts_recent = t2 // t1 < t2
tcp_child_process
tcp_rcv_state_process
tcp_validate_incoming
tcp_paws_check
if ((s32)(rx_opt->ts_recent - rx_opt->rcv_tsval) <= paws_win)
// t2 - t1 > paws_win, failed
tcp_v4_do_rcv
tcp_rcv_state_process
// TCP_ESTABLISHED
The cpu2's skb or a newly received skb will call tcp_v4_do_rcv to get
the newsk into the TCP_ESTABLISHED state, but at this point it is no
longer possible to notify the upper layer application. A notification
mechanism could be added here, but the fix is more complex, so the
current fix is used.
In tcp_check_req, req->ts_recent is used to assign a value to
tcp_sk(child)->rx_opt.ts_recent, so removing the change in req->ts_recent
and changing tcp_sk(child)->rx_opt.ts_recent directly after owning the
req fixes this bug.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Recently, some fallback have been initiated, while the connection was
not supposed to fallback.
Add a safety check with a warning to detect when an wrong attempt to
fallback is being done. This should help detecting any future issues
quicker.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250224-net-mptcp-misc-fixes-v1-3-f550f636b435@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Before this patch, if the checksum was not used, the subflow was only
reset if map_data_len was != 0. If there were no MPTCP options or an
invalid mapping, map_data_len was not set to the data len, and then the
subflow was not reset as it should have been, leaving the MPTCP
connection in a wrong fallback mode.
This map_data_len condition has been introduced to handle the reception
of the infinite mapping. Instead, a new dedicated mapping error could
have been returned and treated as a special case. However, the commit
31bf11de146c ("mptcp: introduce MAPPING_BAD_CSUM") has been introduced
by Paolo Abeni soon after, and backported later on to stable. It better
handle the csum case, and it means the exception for valid_csum_seen in
subflow_can_fallback(), plus this one for the infinite mapping in
subflow_check_data_avail(), are no longer needed.
In other words, the code can be simplified there: a fallback should only
be done if msk->allow_infinite_fallback is set. This boolean is set to
false once MPTCP-specific operations acting on the whole MPTCP
connection vs the initial path have been done, e.g. a second path has
been created, or an MPTCP re-injection -- yes, possible even with a
single subflow. The subflow_can_fallback() helper can then be dropped,
and replaced by this single condition.
This also makes the code clearer: a fallback should only be done if it
is possible to do so.
While at it, no need to set map_data_len to 0 in get_mapping_status()
for the infinite mapping case: it will be set to skb->len just after, at
the end of subflow_check_data_avail(), and not read in between.
Fixes: f8d4bcacff3b ("mptcp: infinite mapping receiving")
Cc: stable@vger.kernel.org
Reported-by: Chester A. Unal <chester.a.unal@xpedite-tech.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/544
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Tested-by: Chester A. Unal <chester.a.unal@xpedite-tech.com>
Link: https://patch.msgid.link/20250224-net-mptcp-misc-fixes-v1-2-f550f636b435@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Syzkaller reported a lockdep splat in the PM control path:
WARNING: CPU: 0 PID: 6693 at ./include/net/sock.h:1711 sock_owned_by_me include/net/sock.h:1711 [inline]
WARNING: CPU: 0 PID: 6693 at ./include/net/sock.h:1711 msk_owned_by_me net/mptcp/protocol.h:363 [inline]
WARNING: CPU: 0 PID: 6693 at ./include/net/sock.h:1711 mptcp_pm_nl_addr_send_ack+0x57c/0x610 net/mptcp/pm_netlink.c:788
Modules linked in:
CPU: 0 UID: 0 PID: 6693 Comm: syz.0.205 Not tainted 6.14.0-rc2-syzkaller-00303-gad1b832bf1cf #0
Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 12/27/2024
RIP: 0010:sock_owned_by_me include/net/sock.h:1711 [inline]
RIP: 0010:msk_owned_by_me net/mptcp/protocol.h:363 [inline]
RIP: 0010:mptcp_pm_nl_addr_send_ack+0x57c/0x610 net/mptcp/pm_netlink.c:788
Code: 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc e8 ca 7b d3 f5 eb b9 e8 c3 7b d3 f5 90 0f 0b 90 e9 dd fb ff ff e8 b5 7b d3 f5 90 <0f> 0b 90 e9 3e fb ff ff 44 89 f1 80 e1 07 38 c1 0f 8c eb fb ff ff
RSP: 0000:ffffc900034f6f60 EFLAGS: 00010283
RAX: ffffffff8bee3c2b RBX: 0000000000000001 RCX: 0000000000080000
RDX: ffffc90004d42000 RSI: 000000000000a407 RDI: 000000000000a408
RBP: ffffc900034f7030 R08: ffffffff8bee37f6 R09: 0100000000000000
R10: dffffc0000000000 R11: ffffed100bcc62e4 R12: ffff88805e6316e0
R13: ffff88805e630c00 R14: dffffc0000000000 R15: ffff88805e630c00
FS: 00007f7e9a7e96c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2fd18ff8 CR3: 0000000032c24000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
mptcp_pm_remove_addr+0x103/0x1d0 net/mptcp/pm.c:59
mptcp_pm_remove_anno_addr+0x1f4/0x2f0 net/mptcp/pm_netlink.c:1486
mptcp_nl_remove_subflow_and_signal_addr net/mptcp/pm_netlink.c:1518 [inline]
mptcp_pm_nl_del_addr_doit+0x118d/0x1af0 net/mptcp/pm_netlink.c:1629
genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
genl_rcv_msg+0xb1f/0xec0 net/netlink/genetlink.c:1210
netlink_rcv_skb+0x206/0x480 net/netlink/af_netlink.c:2543
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219
netlink_unicast_kernel net/netlink/af_netlink.c:1322 [inline]
netlink_unicast+0x7f6/0x990 net/netlink/af_netlink.c:1348
netlink_sendmsg+0x8de/0xcb0 net/netlink/af_netlink.c:1892
sock_sendmsg_nosec net/socket.c:718 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:733
____sys_sendmsg+0x53a/0x860 net/socket.c:2573
___sys_sendmsg net/socket.c:2627 [inline]
__sys_sendmsg+0x269/0x350 net/socket.c:2659
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f7e9998cde9
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f7e9a7e9038 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f7e99ba5fa0 RCX: 00007f7e9998cde9
RDX: 000000002000c094 RSI: 0000400000000000 RDI: 0000000000000007
RBP: 00007f7e99a0e2a0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 00007f7e99ba5fa0 R15: 00007fff49231088
Indeed the PM can try to send a RM_ADDR over a msk without acquiring
first the msk socket lock.
The bugged code-path comes from an early optimization: when there
are no subflows, the PM should (usually) not send RM_ADDR
notifications.
The above statement is incorrect, as without locks another process
could concurrent create a new subflow and cause the RM_ADDR generation.
Additionally the supposed optimization is not very effective even
performance-wise, as most mptcp sockets should have at least one
subflow: the MPC one.
Address the issue removing the buggy code path, the existing "slow-path"
will handle correctly even the edge case.
Fixes: b6c08380860b ("mptcp: remove addr and subflow in PM netlink")
Cc: stable@vger.kernel.org
Reported-by: syzbot+cd3ce3d03a3393ae9700@syzkaller.appspotmail.com
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/546
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250224-net-mptcp-misc-fixes-v1-1-f550f636b435@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, we report -ETOOSMALL (err) only on the first iteration
(!sent). When we get put_cmsg error after a bunch of successful
put_cmsg calls, we don't signal the error at all. This might be
confusing on the userspace side which will see truncated CMSGs
but no MSG_CTRUNC signal.
Consider the following case:
- sizeof(struct cmsghdr) = 16
- sizeof(struct dmabuf_cmsg) = 24
- total cmsg size (CMSG_LEN) = 40 (16+24)
When calling recvmsg with msg_controllen=60, the userspace
will receive two(!) dmabuf_cmsg(s), the first one will
be a valid one and the second one will be silently truncated. There is no
easy way to discover the truncation besides doing something like
"cm->cmsg_len != CMSG_LEN(sizeof(dmabuf_cmsg))".
Introduce new put_devmem_cmsg wrapper that reports an error instead
of doing the truncation. Mina suggests that it's the intended way
this API should work.
Note that we might now report MSG_CTRUNC when the users (incorrectly)
call us with msg_control == NULL.
Fixes: 8f0b3cc9a4c1 ("tcp: RX path for devmem TCP")
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250224174401.3582695-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a warning about unused variables when building with W=1 and no procfs:
net/sunrpc/cache.c:1660:30: error: 'cache_flush_proc_ops' defined but not used [-Werror=unused-const-variable=]
1660 | static const struct proc_ops cache_flush_proc_ops = {
| ^~~~~~~~~~~~~~~~~~~~
net/sunrpc/cache.c:1622:30: error: 'content_proc_ops' defined but not used [-Werror=unused-const-variable=]
1622 | static const struct proc_ops content_proc_ops = {
| ^~~~~~~~~~~~~~~~
net/sunrpc/cache.c:1598:30: error: 'cache_channel_proc_ops' defined but not used [-Werror=unused-const-variable=]
1598 | static const struct proc_ops cache_channel_proc_ops = {
| ^~~~~~~~~~~~~~~~~~~~~~
These are used inside of an #ifdef, so replacing that with an
IS_ENABLED() check lets the compiler see how they are used while
still dropping them during dead code elimination.
Fixes: dbf847ecb631 ("knfsd: allow cache_register to return error on failure")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
We found an issue when using bpf_redirect with ipvs NAT mode after
commit ff70202b2d1a ("dev_forward_skb: do not scrub skb mark within
the same name space"). Particularly, we use bpf_redirect to return
the skb directly back to the netif it comes from, i.e., xnet is
false in skb_scrub_packet(), and then ipvs_property is preserved
and SNAT is skipped in the rx path.
ipvs_property has been already cleared when netns is changed in
commit 2b5ec1a5f973 ("netfilter/ipvs: clear ipvs_property flag when
SKB net namespace changed"). This patch just clears it in spite of
netns.
Fixes: 2b5ec1a5f973 ("netfilter/ipvs: clear ipvs_property flag when SKB net namespace changed")
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Link: https://patch.msgid.link/20250222033518.126087-1-lulie@linux.alibaba.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The legacy ioctl path does not have support for extended attributes.
So we issue a GET to fetch the current settings from the driver,
in an attempt to keep them unchanged. HDS is a bit "special" as
the GET only returns on/off while the SET takes a "ternary" argument
(on/off/default). If the driver was in the "default" setting -
executing the ioctl path binds it to on or off, even tho the user
did not intend to change HDS config.
Factor the relevant logic out of the netlink code and reuse it.
Fixes: 87c8f8496a05 ("bnxt_en: add support for tcp-data-split ethtool command")
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Tested-by: Daniel Xu <dxu@dxuuu.xyz>
Tested-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250221025141.1132944-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 7acf8a1e8a28 ("Replace 2 jiffies with sysctl netdev_budget_usecs
to enable softirq tuning") added a possibility to set
net_hotdata.netdev_budget_usecs, but added no lower bound checking.
Commit a4837980fd9f ("net: revert default NAPI poll timeout to 2 jiffies")
made the *initial* value HZ-dependent, so the initial value is at least
2 jiffies even for lower HZ values (2 ms for 1000 Hz, 8ms for 250 Hz, 20
ms for 100 Hz).
But a user still can set improper values by a sysctl. Set .extra1
(the lower bound) for net_hotdata.netdev_budget_usecs to the same value
as in the latter commit. That is to 2 jiffies.
Fixes: a4837980fd9f ("net: revert default NAPI poll timeout to 2 jiffies")
Fixes: 7acf8a1e8a28 ("Replace 2 jiffies with sysctl netdev_budget_usecs to enable softirq tuning")
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Dmitry Yakunin <zeil@yandex-team.ru>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Link: https://patch.msgid.link/20250220110752.137639-1-jirislaby@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While kernel sockets are dismantled during pernet_operations->exit(),
their freeing can be delayed by any tx packets still held in qdisc
or device queues, due to skb_set_owner_w() prior calls.
This then trigger the following warning from ref_tracker_dir_exit() [1]
To fix this, make sure that kernel sockets own a reference on net->passive.
Add sk_net_refcnt_upgrade() helper, used whenever a kernel socket
is converted to a refcounted one.
[1]
[ 136.263918][ T35] ref_tracker: net notrefcnt@ffff8880638f01e0 has 1/2 users at
[ 136.263918][ T35] sk_alloc+0x2b3/0x370
[ 136.263918][ T35] inet6_create+0x6ce/0x10f0
[ 136.263918][ T35] __sock_create+0x4c0/0xa30
[ 136.263918][ T35] inet_ctl_sock_create+0xc2/0x250
[ 136.263918][ T35] igmp6_net_init+0x39/0x390
[ 136.263918][ T35] ops_init+0x31e/0x590
[ 136.263918][ T35] setup_net+0x287/0x9e0
[ 136.263918][ T35] copy_net_ns+0x33f/0x570
[ 136.263918][ T35] create_new_namespaces+0x425/0x7b0
[ 136.263918][ T35] unshare_nsproxy_namespaces+0x124/0x180
[ 136.263918][ T35] ksys_unshare+0x57d/0xa70
[ 136.263918][ T35] __x64_sys_unshare+0x38/0x40
[ 136.263918][ T35] do_syscall_64+0xf3/0x230
[ 136.263918][ T35] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 136.263918][ T35]
[ 136.343488][ T35] ref_tracker: net notrefcnt@ffff8880638f01e0 has 1/2 users at
[ 136.343488][ T35] sk_alloc+0x2b3/0x370
[ 136.343488][ T35] inet6_create+0x6ce/0x10f0
[ 136.343488][ T35] __sock_create+0x4c0/0xa30
[ 136.343488][ T35] inet_ctl_sock_create+0xc2/0x250
[ 136.343488][ T35] ndisc_net_init+0xa7/0x2b0
[ 136.343488][ T35] ops_init+0x31e/0x590
[ 136.343488][ T35] setup_net+0x287/0x9e0
[ 136.343488][ T35] copy_net_ns+0x33f/0x570
[ 136.343488][ T35] create_new_namespaces+0x425/0x7b0
[ 136.343488][ T35] unshare_nsproxy_namespaces+0x124/0x180
[ 136.343488][ T35] ksys_unshare+0x57d/0xa70
[ 136.343488][ T35] __x64_sys_unshare+0x38/0x40
[ 136.343488][ T35] do_syscall_64+0xf3/0x230
[ 136.343488][ T35] entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: 0cafd77dcd03 ("net: add a refcount tracker for kernel sockets")
Reported-by: syzbot+30a19e01a97420719891@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/67b72aeb.050a0220.14d86d.0283.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250220131854.4048077-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- btusb: Always allow SCO packets for user channel
- L2CAP: Fix L2CAP_ECRED_CONN_RSP response
* tag 'for-net-2025-02-21' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: L2CAP: Fix L2CAP_ECRED_CONN_RSP response
Bluetooth: Always allow SCO packets for user channel
====================
Link: https://patch.msgid.link/20250221154941.2139043-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
rxrpc_new_incoming_peer() can't use spin_lock_bh() whilst its caller has
interrupts disabled.
WARNING: CPU: 0 PID: 1550 at kernel/softirq.c:369 __local_bh_enable_ip+0x46/0xd0
...
Call Trace:
rxrpc_alloc_incoming_call+0x1b0/0x400
rxrpc_new_incoming_call+0x1dd/0x5e0
rxrpc_input_packet+0x84a/0x920
rxrpc_io_thread+0x40d/0xb40
kthread+0x2ec/0x300
ret_from_fork+0x24/0x40
ret_from_fork_asm+0x1a/0x30
</TASK>
irq event stamp: 1811
hardirqs last enabled at (1809): _raw_spin_unlock_irq+0x24/0x50
hardirqs last disabled at (1810): _raw_read_lock_irq+0x17/0x70
softirqs last enabled at (1182): handle_softirqs+0x3ee/0x430
softirqs last disabled at (1811): rxrpc_new_incoming_peer+0x56/0x120
Fix this by using a plain spin_lock() instead. IRQs are held, so softirqs
can't happen.
Fixes: a2ea9a907260 ("rxrpc: Use irq-disabling spinlocks between app and I/O thread")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250218192250.296870-4-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The peer->mtu_lock is only used to lock around writes to peer->max_data -
and nothing else; further, all such writes take place in the I/O thread and
the lock is only ever write-locked and never read-locked.
In a couple of places, the write_seqcount_begin() is wrapped in
preempt_disable/enable(), but not in all places. This can cause lockdep to
complain:
WARNING: CPU: 0 PID: 1549 at include/linux/seqlock.h:221 rxrpc_input_ack_trailer+0x305/0x430
...
RIP: 0010:rxrpc_input_ack_trailer+0x305/0x430
Fix this by just getting rid of the lock.
Fixes: eeaedc5449d9 ("rxrpc: Implement path-MTU probing using padded PING ACKs (RFC8899)")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250218192250.296870-3-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The rxperf RPCs seem to have a magic cookie at the end of the request that
was failing to be taken account of by the unmarshalling of the request.
Fix the rxperf code to expect this.
Fixes: 75bfdbf2fca3 ("rxrpc: Implement an in-kernel rxperf server for testing purposes")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250218192250.296870-2-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull BPF fixes from Daniel Borkmann:
- Fix a soft-lockup in BPF arena_map_free on 64k page size kernels
(Alan Maguire)
- Fix a missing allocation failure check in BPF verifier's
acquire_lock_state (Kumar Kartikeya Dwivedi)
- Fix a NULL-pointer dereference in trace_kfree_skb by adding kfree_skb
to the raw_tp_null_args set (Kuniyuki Iwashima)
- Fix a deadlock when freeing BPF cgroup storage (Abel Wu)
- Fix a syzbot-reported deadlock when holding BPF map's freeze_mutex
(Andrii Nakryiko)
- Fix a use-after-free issue in bpf_test_init when eth_skb_pkt_type is
accessing skb data not containing an Ethernet header (Shigeru
Yoshida)
- Fix skipping non-existing keys in generic_map_lookup_batch (Yan Zhai)
- Several BPF sockmap fixes to address incorrect TCP copied_seq
calculations, which prevented correct data reads from recv(2) in user
space (Jiayuan Chen)
- Two fixes for BPF map lookup nullness elision (Daniel Xu)
- Fix a NULL-pointer dereference from vmlinux BTF lookup in
bpf_sk_storage_tracing_allowed (Jared Kangas)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests: bpf: test batch lookup on array of maps with holes
bpf: skip non exist keys in generic_map_lookup_batch
bpf: Handle allocation failure in acquire_lock_state
bpf: verifier: Disambiguate get_constant_map_key() errors
bpf: selftests: Test constant key extraction on irrelevant maps
bpf: verifier: Do not extract constant map keys for irrelevant maps
bpf: Fix softlockup in arena_map_free on 64k page kernel
net: Add rx_skb of kfree_skb to raw_tp_null_args[].
bpf: Fix deadlock when freeing cgroup storage
selftests/bpf: Add strparser test for bpf
selftests/bpf: Fix invalid flag of recv()
bpf: Disable non stream socket for strparser
bpf: Fix wrong copied_seq calculation
strparser: Add read_sock callback
bpf: avoid holding freeze_mutex during mmap operation
bpf: unify VM_WRITE vs VM_MAYWRITE use in BPF map mmaping logic
selftests/bpf: Adjust data size to have ETH_HLEN
bpf, test_run: Fix use-after-free issue in eth_skb_pkt_type()
bpf: Remove unnecessary BTF lookups in bpf_sk_storage_tracing_allowed
|
|
L2CAP_ECRED_CONN_RSP needs to respond DCID in the same order received as
SCID but the order is reversed due to use of list_add which actually
prepend channels to the list so the response is reversed:
> ACL Data RX: Handle 16 flags 0x02 dlen 26
LE L2CAP: Enhanced Credit Connection Request (0x17) ident 2 len 18
PSM: 39 (0x0027)
MTU: 256
MPS: 251
Credits: 65535
Source CID: 116
Source CID: 117
Source CID: 118
Source CID: 119
Source CID: 120
< ACL Data TX: Handle 16 flags 0x00 dlen 26
LE L2CAP: Enhanced Credit Connection Response (0x18) ident 2 len 18
MTU: 517
MPS: 247
Credits: 3
Result: Connection successful (0x0000)
Destination CID: 68
Destination CID: 67
Destination CID: 66
Destination CID: 65
Destination CID: 64
Also make sure the response don't include channels that are not on
BT_CONNECT2 since the chan->ident can be set to the same value as in the
following trace:
< ACL Data TX: Handle 16 flags 0x00 dlen 12
LE L2CAP: LE Flow Control Credit (0x16) ident 6 len 4
Source CID: 64
Credits: 1
...
> ACL Data RX: Handle 16 flags 0x02 dlen 18
LE L2CAP: Enhanced Credit Connection Request (0x17) ident 6 len 10
PSM: 39 (0x0027)
MTU: 517
MPS: 251
Credits: 255
Source CID: 70
< ACL Data TX: Handle 16 flags 0x00 dlen 20
LE L2CAP: Enhanced Credit Connection Response (0x18) ident 6 len 12
MTU: 517
MPS: 247
Credits: 3
Result: Connection successful (0x0000)
Destination CID: 64
Destination CID: 68
Closes: https://github.com/bluez/bluez/issues/1094
Fixes: 9aa9d9473f15 ("Bluetooth: L2CAP: Fix responding with wrong PDU type")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
After the previous commit is finally safe to revert commit dbae2b062824
("net: skb: introduce and use a single page frag cache"): do it here.
The intended goal of such change was to counter a performance regression
introduced by commit 3226b158e67c ("net: avoid 32 x truesize
under-estimation for tiny skbs").
Unfortunately, the blamed commit introduces another regression for the
virtio_net driver. Such a driver calls napi_alloc_skb() with a tiny
size, so that the whole head frag could fit a 512-byte block.
The single page frag cache uses a 1K fragment for such allocation, and
the additional overhead, under small UDP packets flood, makes the page
allocator a bottleneck.
Thanks to commit bf9f1baa279f ("net: add dedicated kmem_cache for
typical/small skb->head"), this revert does not re-introduce the
original regression. Actually, in the relevant test on top of this
revert, I measure a small but noticeable positive delta, just above
noise level.
The revert itself required some additional mangling due to recent updates
in the affected code.
Suggested-by: Eric Dumazet <edumazet@google.com>
Fixes: dbae2b062824 ("net: skb: introduce and use a single page frag cache")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Sabrina reported the following splat:
WARNING: CPU: 0 PID: 1 at net/core/dev.c:6935 netif_napi_add_weight_locked+0x8f2/0xba0
Modules linked in:
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.14.0-rc1-net-00092-g011b03359038 #996
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
RIP: 0010:netif_napi_add_weight_locked+0x8f2/0xba0
Code: e8 c3 e6 6a fe 48 83 c4 28 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc c7 44 24 10 ff ff ff ff e9 8f fb ff ff e8 9e e6 6a fe <0f> 0b e9 d3 fe ff ff e8 92 e6 6a fe 48 8b 04 24 be ff ff ff ff 48
RSP: 0000:ffffc9000001fc60 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff88806ce48128 RCX: 1ffff11001664b9e
RDX: ffff888008f00040 RSI: ffffffff8317ca42 RDI: ffff88800b325cb6
RBP: ffff88800b325c40 R08: 0000000000000001 R09: ffffed100167502c
R10: ffff88800b3a8163 R11: 0000000000000000 R12: ffff88800ac1c168
R13: ffff88800ac1c168 R14: ffff88800ac1c168 R15: 0000000000000007
FS: 0000000000000000(0000) GS:ffff88806ce00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff888008201000 CR3: 0000000004c94001 CR4: 0000000000370ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
gro_cells_init+0x1ba/0x270
xfrm_input_init+0x4b/0x2a0
xfrm_init+0x38/0x50
ip_rt_init+0x2d7/0x350
ip_init+0xf/0x20
inet_init+0x406/0x590
do_one_initcall+0x9d/0x2e0
do_initcalls+0x23b/0x280
kernel_init_freeable+0x445/0x490
kernel_init+0x20/0x1d0
ret_from_fork+0x46/0x80
ret_from_fork_asm+0x1a/0x30
</TASK>
irq event stamp: 584330
hardirqs last enabled at (584338): [<ffffffff8168bf87>] __up_console_sem+0x77/0xb0
hardirqs last disabled at (584345): [<ffffffff8168bf6c>] __up_console_sem+0x5c/0xb0
softirqs last enabled at (583242): [<ffffffff833ee96d>] netlink_insert+0x14d/0x470
softirqs last disabled at (583754): [<ffffffff8317c8cd>] netif_napi_add_weight_locked+0x77d/0xba0
on kernel built with MAX_SKB_FRAGS=45, where SKB_WITH_OVERHEAD(1024)
is smaller than GRO_MAX_HEAD.
Such built additionally contains the revert of the single page frag cache
so that napi_get_frags() ends up using the page frag allocator, triggering
the splat.
Note that the underlying issue is independent from the mentioned
revert; address it ensuring that the small head cache will fit either TCP
and GRO allocation and updating napi_alloc_skb() and __netdev_alloc_skb()
to select kmalloc() usage for any allocation fitting such cache.
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Suggested-by: Eric Dumazet <edumazet@google.com>
Fixes: 3948b05950fd ("net: introduce a config option to tweak MAX_SKB_FRAGS")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Xiumei reported hitting the WARN in xfrm6_tunnel_net_exit while
running tests that boil down to:
- create a pair of netns
- run a basic TCP test over ipcomp6
- delete the pair of netns
The xfrm_state found on spi_byaddr was not deleted at the time we
delete the netns, because we still have a reference on it. This
lingering reference comes from a secpath (which holds a ref on the
xfrm_state), which is still attached to an skb. This skb is not
leaked, it ends up on sk_receive_queue and then gets defer-free'd by
skb_attempt_defer_free.
The problem happens when we defer freeing an skb (push it on one CPU's
defer_list), and don't flush that list before the netns is deleted. In
that case, we still have a reference on the xfrm_state that we don't
expect at this point.
We already drop the skb's dst in the TCP receive path when it's no
longer needed, so let's also drop the secpath. At this point,
tcp_filter has already called into the LSM hooks that may require the
secpath, so it should not be needed anymore. However, in some of those
places, the MPTCP extension has just been attached to the skb, so we
cannot simply drop all extensions.
Fixes: 68822bdf76f1 ("net: generalize skb freeing deferral to per-cpu lists")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/5055ba8f8f72bdcb602faa299faca73c280b7735.1739743613.git.sd@queasysnail.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The arp_req_set_public() function is called with the rtnl lock held,
which provides enough synchronization protection. This makes the RCU
variant of dev_getbyhwaddr() unnecessary. Switch to using the simpler
dev_getbyhwaddr() function since we already have the required rtnl
locking.
This change helps maintain consistency in the networking code by using
the appropriate helper function for the existing locking context.
Since we're not holding the RCU read lock in arp_req_set_public()
existing code could trigger false positive locking warnings.
Fixes: 941666c2e3e0 ("net: RCU conversion of dev_getbyhwaddr() and arp_ioctl()")
Suggested-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250218-arm_fix_selftest-v5-2-d3d6892db9e1@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add dedicated helper for finding devices by hardware address when
holding rtnl_lock, similar to existing dev_getbyhwaddr_rcu(). This prevents
PROVE_LOCKING warnings when rtnl_lock is held but RCU read lock is not.
Extract common address comparison logic into dev_addr_cmp().
The context about this change could be found in the following
discussion:
Link: https://lore.kernel.org/all/20250206-scarlet-ermine-of-improvement-1fcac5@leitao/
Cc: kuniyu@amazon.com
Cc: ushankar@purestorage.com
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250218-arm_fix_selftest-v5-1-d3d6892db9e1@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
According to the C11 standard (ISO/IEC 9899:2011, 6.5.7):
"If E1 has a signed type and E1 x 2^E2 is not representable in the result
type, the behavior is undefined."
Shifting 1 << 31 causes signed integer overflow, which leads to undefined
behavior.
Fix this by explicitly using '1U << 31' to ensure the shift operates on
an unsigned type, avoiding undefined behavior.
Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com>
Link: https://patch.msgid.link/20250218081217.3468369-1-eleanor15x@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix how port range keys are handled in __skb_flow_bpf_to_target() by:
- Separating PORTS and PORTS_RANGE key handling
- Using correct key_ports_range structure for range keys
- Properly initializing both key types independently
This ensures port range information is correctly stored in its dedicated
structure rather than incorrectly using the regular ports key structure.
Fixes: 59fb9b62fb6c ("flow_dissector: Fix to use new variables for port ranges in bpf hook")
Reported-by: Qiang Zhang <dtzq01@gmail.com>
Closes: https://lore.kernel.org/netdev/CAPx+-5uvFxkhkz4=j_Xuwkezjn9U6kzKTD5jz4tZ9msSJ0fOJA@mail.gmail.com/
Cc: Yoshiki Komachi <komachi.yoshiki@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://patch.msgid.link/20250218043210.732959-4-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch fixes a bug in TC flower filter where rules combining a
specific destination port with a source port range weren't working
correctly.
The specific case was when users tried to configure rules like:
tc filter add dev ens38 ingress protocol ip flower ip_proto udp \
dst_port 5000 src_port 2000-3000 action drop
The root cause was in the flow dissector code. While both
FLOW_DISSECTOR_KEY_PORTS and FLOW_DISSECTOR_KEY_PORTS_RANGE flags
were being set correctly in the classifier, the __skb_flow_dissect_ports()
function was only populating one of them: whichever came first in
the enum check. This meant that when the code needed both a specific
port and a port range, one of them would be left as 0, causing the
filter to not match packets as expected.
Fix it by removing the either/or logic and instead checking and
populating both key types independently when they're in use.
Fixes: 8ffb055beae5 ("cls_flower: Fix the behavior using port ranges with hw-offload")
Reported-by: Qiang Zhang <dtzq01@gmail.com>
Closes: https://lore.kernel.org/netdev/CAPx+-5uvFxkhkz4=j_Xuwkezjn9U6kzKTD5jz4tZ9msSJ0fOJA@mail.gmail.com/
Cc: Yoshiki Komachi <komachi.yoshiki@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250218043210.732959-2-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If the TLS handshake attempt returns -ETIMEDOUT, we currently translate
that error into -EACCES. This becomes problematic for cases where the RPC
layer is attempting to re-connect in paths that don't resonably handle
-EACCES, for example: writeback. The RPC layer can handle -ETIMEDOUT quite
well, however - so if the handshake returns this error let's just pass it
along.
Fixes: 75eb6af7acdf ("SUNRPC: Add a TCP-with-TLS RPC transport class")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
If rpc_signal_task() is called while a task is in an rpc_call_done()
callback function, and the latter calls rpc_restart_call(), the task can
end up looping due to the RPC_TASK_SIGNALLED flag being set without the
tk_rpc_status being set.
Removing the redundant mechanism for signalling the task fixes the
looping behaviour.
Reported-by: Li Lingfeng <lilingfeng3@huawei.com>
Fixes: 39494194f93b ("SUNRPC: Fix races with rpc_killall_tasks()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
The following sequence is basically illegal when dev was fetched
without lookup because dev_net(dev) might be different after holding
rtnl_net_lock():
net = dev_net(dev);
rtnl_net_lock(net);
Let's use rtnl_net_dev_lock() in unregister_netdev().
Note that there is no real bug in unregister_netdev() for now
because RTNL protects the scope even if dev_net(dev) is changed
before/after RTNL.
Fixes: 00fb9823939e ("dev: Hold per-netns RTNL in (un)?register_netdev().")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250217191129.19967-4-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After the cited commit, dev_net(dev) is fetched before holding RTNL
and passed to __unregister_netdevice_notifier_net().
However, dev_net(dev) might be different after holding RTNL.
In the reported case [0], while removing a VF device, its netns was
being dismantled and the VF was moved to init_net.
So the following sequence is basically illegal when dev was fetched
without lookup:
net = dev_net(dev);
rtnl_net_lock(net);
Let's use a new helper rtnl_net_dev_lock() to fix the race.
It fetches dev_net_rcu(dev), bumps its net->passive, and checks if
dev_net_rcu(dev) is changed after rtnl_net_lock().
[0]:
BUG: KASAN: slab-use-after-free in notifier_call_chain (kernel/notifier.c:75 (discriminator 2))
Read of size 8 at addr ffff88810cefb4c8 by task test-bridge-lag/21127
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:123)
print_report (mm/kasan/report.c:379 mm/kasan/report.c:489)
kasan_report (mm/kasan/report.c:604)
notifier_call_chain (kernel/notifier.c:75 (discriminator 2))
call_netdevice_notifiers_info (net/core/dev.c:2011)
unregister_netdevice_many_notify (net/core/dev.c:11551)
unregister_netdevice_queue (net/core/dev.c:11487)
unregister_netdev (net/core/dev.c:11635)
mlx5e_remove (drivers/net/ethernet/mellanox/mlx5/core/en_main.c:6552 drivers/net/ethernet/mellanox/mlx5/core/en_main.c:6579) mlx5_core
auxiliary_bus_remove (drivers/base/auxiliary.c:230)
device_release_driver_internal (drivers/base/dd.c:1275 drivers/base/dd.c:1296)
bus_remove_device (./include/linux/kobject.h:193 drivers/base/base.h:73 drivers/base/bus.c:583)
device_del (drivers/base/power/power.h:142 drivers/base/core.c:3855)
mlx5_rescan_drivers_locked (./include/linux/auxiliary_bus.h:241 drivers/net/ethernet/mellanox/mlx5/core/dev.c:333 drivers/net/ethernet/mellanox/mlx5/core/dev.c:535 drivers/net/ethernet/mellanox/mlx5/core/dev.c:549) mlx5_core
mlx5_unregister_device (drivers/net/ethernet/mellanox/mlx5/core/dev.c:468) mlx5_core
mlx5_uninit_one (./include/linux/instrumented.h:68 ./include/asm-generic/bitops/instrumented-non-atomic.h:141 drivers/net/ethernet/mellanox/mlx5/core/main.c:1563) mlx5_core
remove_one (drivers/net/ethernet/mellanox/mlx5/core/main.c:965 drivers/net/ethernet/mellanox/mlx5/core/main.c:2019) mlx5_core
pci_device_remove (./include/linux/pm_runtime.h:129 drivers/pci/pci-driver.c:475)
device_release_driver_internal (drivers/base/dd.c:1275 drivers/base/dd.c:1296)
unbind_store (drivers/base/bus.c:245)
kernfs_fop_write_iter (fs/kernfs/file.c:338)
vfs_write (fs/read_write.c:587 (discriminator 1) fs/read_write.c:679 (discriminator 1))
ksys_write (fs/read_write.c:732)
do_syscall_64 (arch/x86/entry/common.c:52 (discriminator 1) arch/x86/entry/common.c:83 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
RIP: 0033:0x7f6a4d5018b7
Fixes: 7fb1073300a2 ("net: Hold rtnl_net_lock() in (un)?register_netdevice_notifier_dev_net().")
Reported-by: Yael Chemla <ychemla@nvidia.com>
Closes: https://lore.kernel.org/netdev/146eabfe-123c-4970-901e-e961b4c09bc3@nvidia.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250217191129.19967-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
net_drop_ns() is NULL when CONFIG_NET_NS is disabled.
The next patch introduces a function that increments
and decrements net->passive.
As a prep, let's rename and export net_free() to
net_passive_dec() and add net_passive_inc().
Suggested-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/netdev/CANn89i+oUCt2VGvrbrweniTendZFEh+nwS=uonc004-aPkWy-Q@mail.gmail.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250217191129.19967-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit under Fixes we set the window clamp in accordance
to newly measured rcvbuf scaling_ratio. If the scaling_ratio
decreased significantly we may put ourselves in a situation
where windows become smaller than rcvq_space, preventing
tcp_rcv_space_adjust() from increasing rcvbuf.
The significant decrease of scaling_ratio is far more likely
since commit 697a6c8cec03 ("tcp: increase the default TCP scaling ratio"),
which increased the "default" scaling ratio from ~30% to 50%.
Hitting the bad condition depends a lot on TCP tuning, and
drivers at play. One of Meta's workloads hits it reliably
under following conditions:
- default rcvbuf of 125k
- sender MTU 1500, receiver MTU 5000
- driver settles on scaling_ratio of 78 for the config above.
Initial rcvq_space gets calculated as TCP_INIT_CWND * tp->advmss
(10 * 5k = 50k). Once we find out the true scaling ratio and
MSS we clamp the windows to 38k. Triggering the condition also
depends on the message sequence of this workload. I can't repro
the problem with simple iperf or TCP_RR-style tests.
Fixes: a2cbb1603943 ("tcp: Update window clamping condition")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20250217232905.3162187-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the spirit of commit 91751e248256 ("vsock: prevent null-ptr-deref in
vsock_*[has_data|has_space]"), armorize the "impossible" cases with a
warning.
Fixes: 634f1a7110b4 ("vsock: support sockmap")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
sockmap expects all vsocks to have a transport assigned, which is expressed
in vsock_proto::psock_update_sk_prot(). However, there is an edge case
where an unconnected (connectible) socket may lose its previously assigned
transport. This is handled with a NULL check in the vsock/BPF recv path.
Another design detail is that listening vsocks are not supposed to have any
transport assigned at all. Which implies they are not supported by the
sockmap. But this is complicated by the fact that a socket, before
switching to TCP_LISTEN, may have had some transport assigned during a
failed connect() attempt. Hence, we may end up with a listening vsock in a
sockmap, which blows up quickly:
KASAN: null-ptr-deref in range [0x0000000000000120-0x0000000000000127]
CPU: 7 UID: 0 PID: 56 Comm: kworker/7:0 Not tainted 6.14.0-rc1+
Workqueue: vsock-loopback vsock_loopback_work
RIP: 0010:vsock_read_skb+0x4b/0x90
Call Trace:
sk_psock_verdict_data_ready+0xa4/0x2e0
virtio_transport_recv_pkt+0x1ca8/0x2acc
vsock_loopback_work+0x27d/0x3f0
process_one_work+0x846/0x1420
worker_thread+0x5b3/0xf80
kthread+0x35a/0x700
ret_from_fork+0x2d/0x70
ret_from_fork_asm+0x1a/0x30
For connectible sockets, instead of relying solely on the state of
vsk->transport, tell sockmap to only allow those representing established
connections. This aligns with the behaviour for AF_INET and AF_UNIX.
Fixes: 634f1a7110b4 ("vsock: support sockmap")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Syzkaller reports the following bug:
BUG: spinlock bad magic on CPU#1, syz-executor.0/7995
lock: 0xffff88805303f3e0, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
CPU: 1 PID: 7995 Comm: syz-executor.0 Tainted: G E 5.10.209+ #1
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x119/0x179 lib/dump_stack.c:118
debug_spin_lock_before kernel/locking/spinlock_debug.c:83 [inline]
do_raw_spin_lock+0x1f6/0x270 kernel/locking/spinlock_debug.c:112
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:117 [inline]
_raw_spin_lock_irqsave+0x50/0x70 kernel/locking/spinlock.c:159
reset_per_cpu_data+0xe6/0x240 [drop_monitor]
net_dm_cmd_trace+0x43d/0x17a0 [drop_monitor]
genl_family_rcv_msg_doit+0x22f/0x330 net/netlink/genetlink.c:739
genl_family_rcv_msg net/netlink/genetlink.c:783 [inline]
genl_rcv_msg+0x341/0x5a0 net/netlink/genetlink.c:800
netlink_rcv_skb+0x14d/0x440 net/netlink/af_netlink.c:2497
genl_rcv+0x29/0x40 net/netlink/genetlink.c:811
netlink_unicast_kernel net/netlink/af_netlink.c:1322 [inline]
netlink_unicast+0x54b/0x800 net/netlink/af_netlink.c:1348
netlink_sendmsg+0x914/0xe00 net/netlink/af_netlink.c:1916
sock_sendmsg_nosec net/socket.c:651 [inline]
__sock_sendmsg+0x157/0x190 net/socket.c:663
____sys_sendmsg+0x712/0x870 net/socket.c:2378
___sys_sendmsg+0xf8/0x170 net/socket.c:2432
__sys_sendmsg+0xea/0x1b0 net/socket.c:2461
do_syscall_64+0x30/0x40 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x62/0xc7
RIP: 0033:0x7f3f9815aee9
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f3f972bf0c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f3f9826d050 RCX: 00007f3f9815aee9
RDX: 0000000020000000 RSI: 0000000020001300 RDI: 0000000000000007
RBP: 00007f3f981b63bd R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 000000000000006e R14: 00007f3f9826d050 R15: 00007ffe01ee6768
If drop_monitor is built as a kernel module, syzkaller may have time
to send a netlink NET_DM_CMD_START message during the module loading.
This will call the net_dm_monitor_start() function that uses
a spinlock that has not yet been initialized.
To fix this, let's place resource initialization above the registration
of a generic netlink family.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with Syzkaller.
Fixes: 9a8afc8d3962 ("Network Drop Monitor: Adding drop monitor implementation & Netlink protocol")
Cc: stable@vger.kernel.org
Signed-off-by: Ilia Gavrilov <Ilia.Gavrilov@infotecs.ru>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250213152054.2785669-1-Ilia.Gavrilov@infotecs.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tcf_exts_miss_cookie_base_alloc() calls xa_alloc_cyclic() which can
return 1 if the allocation succeeded after wrapping. This was treated as
an error, with value 1 returned to caller tcf_exts_init_ex() which sets
exts->actions to NULL and returns 1 to caller fl_change().
fl_change() treats err == 1 as success, calling tcf_exts_validate_ex()
which calls tcf_action_init() with exts->actions as argument, where it
is dereferenced.
Example trace:
BUG: kernel NULL pointer dereference, address: 0000000000000000
CPU: 114 PID: 16151 Comm: handler114 Kdump: loaded Not tainted 5.14.0-503.16.1.el9_5.x86_64 #1
RIP: 0010:tcf_action_init+0x1f8/0x2c0
Call Trace:
tcf_action_init+0x1f8/0x2c0
tcf_exts_validate_ex+0x175/0x190
fl_change+0x537/0x1120 [cls_flower]
Fixes: 80cd22c35c90 ("net/sched: cls_api: Support hardware miss to tc action")
Signed-off-by: Pierre Riteau <pierre@stackhpc.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250213223610.320278-1-pierre@stackhpc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When executing suspend to ram twice in a row,
the `rx_buf_nr` and `rx_buf_max_nr` increase to three times vq->num_free.
Then after virtqueue_get_buf and `rx_buf_nr` decreased
in function virtio_transport_rx_work,
the condition to fill rx buffer
(rx_buf_nr < rx_buf_max_nr / 2) will never be met.
It is because that `rx_buf_nr` and `rx_buf_max_nr`
are initialized only in virtio_vsock_probe(),
but they should be reset whenever virtqueues are recreated,
like after a suspend/resume.
Move the `rx_buf_nr` and `rx_buf_max_nr` initialization in
virtio_vsock_vqs_init(), so we are sure that they are properly
initialized, every time we initialize the virtqueues, either when we
load the driver or after a suspend/resume.
To prevent erroneous atomic load operations on the `queued_replies`
in the virtio_transport_send_pkt_work() function
which may disrupt the scheduling of vsock->rx_work
when transmitting reply-required socket packets,
this atomic variable must undergo synchronized initialization
alongside the preceding two variables after a suspend/resume.
Fixes: bd50c5dc182b ("vsock/virtio: add support for device suspend/resume")
Link: https://lore.kernel.org/virtualization/20250207052033.2222629-1-junnan01.wu@samsung.com/
Co-developed-by: Ying Gao <ying01.gao@samsung.com>
Signed-off-by: Ying Gao <ying01.gao@samsung.com>
Signed-off-by: Junnan Wu <junnan01.wu@samsung.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250214012200.1883896-1-junnan01.wu@samsung.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wireless and bluetooth.
Kalle Valo steps down after serving as the WiFi driver maintainer for
over a decade.
Current release - fix to a fix:
- vsock: orphan socket after transport release, avoid null-deref
- Bluetooth: L2CAP: fix corrupted list in hci_chan_del
Current release - regressions:
- eth:
- stmmac: correct Rx buffer layout when SPH is enabled
- iavf: fix a locking bug in an error path
- rxrpc: fix alteration of headers whilst zerocopy pending
- s390/qeth: move netif_napi_add_tx() and napi_enable() from under BH
- Revert "netfilter: flowtable: teardown flow if cached mtu is stale"
Current release - new code bugs:
- rxrpc: fix ipv6 path MTU discovery, only ipv4 worked
- pse-pd: fix deadlock in current limit functions
Previous releases - regressions:
- rtnetlink: fix netns refleak with rtnl_setlink()
- wifi: brcmfmac: use random seed flag for BCM4355 and BCM4364
firmware
Previous releases - always broken:
- add missing RCU protection of struct net throughout the stack
- can: rockchip: bail out if skb cannot be allocated
- eth: ti: am65-cpsw: base XDP support fixes
Misc:
- ethtool: tsconfig: update the format of hwtstamp flags, changes the
uAPI but this uAPI was not in any release yet"
* tag 'net-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
net: pse-pd: Fix deadlock in current limit functions
rxrpc: Fix ipv6 path MTU discovery
Reapply "net: skb: introduce and use a single page frag cache"
s390/qeth: move netif_napi_add_tx() and napi_enable() from under BH
mlxsw: Add return value check for mlxsw_sp_port_get_stats_raw()
ipv6: mcast: add RCU protection to mld_newpack()
team: better TEAM_OPTION_TYPE_STRING validation
Bluetooth: L2CAP: Fix corrupted list in hci_chan_del
Bluetooth: btintel_pcie: Fix a potential race condition
Bluetooth: L2CAP: Fix slab-use-after-free Read in l2cap_send_cmd
net: ethernet: ti: am65_cpsw: fix tx_cleanup for XDP case
net: ethernet: ti: am65-cpsw: fix RX & TX statistics for XDP_TX case
net: ethernet: ti: am65-cpsw: fix memleak in certain XDP cases
vsock/test: Add test for SO_LINGER null ptr deref
vsock: Orphan socket after transport release
MAINTAINERS: Add sctp headers to the general netdev entry
Revert "netfilter: flowtable: teardown flow if cached mtu is stale"
iavf: Fix a locking bug in an error path
rxrpc: Fix alteration of headers whilst zerocopy pending
net: phylink: make configuring clock-stop dependent on MAC support
...
|
|
rxrpc path MTU discovery currently only makes use of ICMPv4, but not
ICMPv6, which means that pmtud for IPv6 doesn't work correctly. Fix it to
check for ICMPv6 messages also.
Fixes: eeaedc5449d9 ("rxrpc: Implement path-MTU probing using padded PING ACKs (RFC8899)")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/3517283.1739359284@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- btintel_pcie: Fix a potential race condition
- L2CAP: Fix slab-use-after-free Read in l2cap_send_cmd
- L2CAP: Fix corrupted list in hci_chan_del
* tag 'for-net-2025-02-13' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: L2CAP: Fix corrupted list in hci_chan_del
Bluetooth: btintel_pcie: Fix a potential race condition
Bluetooth: L2CAP: Fix slab-use-after-free Read in l2cap_send_cmd
====================
Link: https://patch.msgid.link/20250213162446.617632-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following batch contains one revert for:
1) Revert flowtable entry teardown cycle when skbuff exceeds mtu to
deal with DF flag unset scenarios. This is reverts a patch coming
in the previous merge window (available in 6.14-rc releases).
* tag 'nf-25-02-13' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
Revert "netfilter: flowtable: teardown flow if cached mtu is stale"
====================
Link: https://patch.msgid.link/20250213100502.3983-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 011b0335903832facca86cd8ed05d7d8d94c9c76.
Sabrina reports that the revert may trigger warnings due to intervening
changes, especially the ability to rise MAX_SKB_FRAGS. Let's drop it
and revisit once that part is also ironed out.
Fixes: 011b03359038 ("Revert "net: skb: introduce and use a single page frag cache"")
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/6bf54579233038bc0e76056c5ea459872ce362ab.1739375933.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mld_newpack() can be called without RTNL or RCU being held.
Note that we no longer can use sock_alloc_send_skb() because
ipv6.igmp_sk uses GFP_KERNEL allocations which can sleep.
Instead use alloc_skb() and charge the net->ipv6.igmp_sk
socket under RCU protection.
Fixes: b8ad0cbc58f7 ("[NETNS][IPV6] mcast - handle several network namespace")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250212141021.1663666-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This fixes the following trace by reworking the locking of l2cap_conn
so instead of only locking when changing the chan_l list this promotes
chan_lock to a general lock of l2cap_conn so whenever it is being held
it would prevents the likes of l2cap_conn_del to run:
list_del corruption, ffff888021297e00->prev is LIST_POISON2 (dead000000000122)
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:61!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 1 UID: 0 PID: 5896 Comm: syz-executor213 Not tainted 6.14.0-rc1-next-20250204-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 12/27/2024
RIP: 0010:__list_del_entry_valid_or_report+0x12c/0x190 lib/list_debug.c:59
Code: 8c 4c 89 fe 48 89 da e8 32 8c 37 fc 90 0f 0b 48 89 df e8 27 9f 14 fd 48 c7 c7 a0 c0 60 8c 4c 89 fe 48 89 da e8 15 8c 37 fc 90 <0f> 0b 4c 89 e7 e8 0a 9f 14 fd 42 80 3c 2b 00 74 08 4c 89 e7 e8 cb
RSP: 0018:ffffc90003f6f998 EFLAGS: 00010246
RAX: 000000000000004e RBX: dead000000000122 RCX: 01454d423f7fbf00
RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000
RBP: dffffc0000000000 R08: ffffffff819f077c R09: 1ffff920007eded0
R10: dffffc0000000000 R11: fffff520007eded1 R12: dead000000000122
R13: dffffc0000000000 R14: ffff8880352248d8 R15: ffff888021297e00
FS: 00007f7ace6686c0(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7aceeeb1d0 CR3: 000000003527c000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__list_del_entry_valid include/linux/list.h:124 [inline]
__list_del_entry include/linux/list.h:215 [inline]
list_del_rcu include/linux/rculist.h:168 [inline]
hci_chan_del+0x70/0x1b0 net/bluetooth/hci_conn.c:2858
l2cap_conn_free net/bluetooth/l2cap_core.c:1816 [inline]
kref_put include/linux/kref.h:65 [inline]
l2cap_conn_put+0x70/0xe0 net/bluetooth/l2cap_core.c:1830
l2cap_sock_shutdown+0xa8a/0x1020 net/bluetooth/l2cap_sock.c:1377
l2cap_sock_release+0x79/0x1d0 net/bluetooth/l2cap_sock.c:1416
__sock_release net/socket.c:642 [inline]
sock_close+0xbc/0x240 net/socket.c:1393
__fput+0x3e9/0x9f0 fs/file_table.c:448
task_work_run+0x24f/0x310 kernel/task_work.c:227
ptrace_notify+0x2d2/0x380 kernel/signal.c:2522
ptrace_report_syscall include/linux/ptrace.h:415 [inline]
ptrace_report_syscall_exit include/linux/ptrace.h:477 [inline]
syscall_exit_work+0xc7/0x1d0 kernel/entry/common.c:173
syscall_exit_to_user_mode_prepare kernel/entry/common.c:200 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:205 [inline]
syscall_exit_to_user_mode+0x24a/0x340 kernel/entry/common.c:218
do_syscall_64+0x100/0x230 arch/x86/entry/common.c:89
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f7aceeaf449
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 41 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f7ace668218 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: fffffffffffffffc RBX: 00007f7acef39328 RCX: 00007f7aceeaf449
RDX: 000000000000000e RSI: 0000000020000100 RDI: 0000000000000004
RBP: 00007f7acef39320 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003
R13: 0000000000000004 R14: 00007f7ace668670 R15: 000000000000000b
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:__list_del_entry_valid_or_report+0x12c/0x190 lib/list_debug.c:59
Code: 8c 4c 89 fe 48 89 da e8 32 8c 37 fc 90 0f 0b 48 89 df e8 27 9f 14 fd 48 c7 c7 a0 c0 60 8c 4c 89 fe 48 89 da e8 15 8c 37 fc 90 <0f> 0b 4c 89 e7 e8 0a 9f 14 fd 42 80 3c 2b 00 74 08 4c 89 e7 e8 cb
RSP: 0018:ffffc90003f6f998 EFLAGS: 00010246
RAX: 000000000000004e RBX: dead000000000122 RCX: 01454d423f7fbf00
RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000
RBP: dffffc0000000000 R08: ffffffff819f077c R09: 1ffff920007eded0
R10: dffffc0000000000 R11: fffff520007eded1 R12: dead000000000122
R13: dffffc0000000000 R14: ffff8880352248d8 R15: ffff888021297e00
FS: 00007f7ace6686c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7acef05b08 CR3: 000000003527c000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Reported-by: syzbot+10bd8fe6741eedd2be2e@syzkaller.appspotmail.com
Tested-by: syzbot+10bd8fe6741eedd2be2e@syzkaller.appspotmail.com
Fixes: b4f82f9ed43a ("Bluetooth: L2CAP: Fix slab-use-after-free Read in l2cap_send_cmd")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
|
