summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2022-08-05net: seg6: initialize induction variable to first valid array indexNick Desaulniers
Fixes the following warnings observed when building CONFIG_IPV6_SEG6_LWTUNNEL=y with clang: net/ipv6/seg6_local.o: warning: objtool: seg6_local_fill_encap() falls through to next function seg6_local_get_encap_size() net/ipv6/seg6_local.o: warning: objtool: seg6_local_cmp_encap() falls through to next function input_action_end() LLVM can fully unroll loops in seg6_local_get_encap_size() and seg6_local_cmp_encap(). One issue in those loops is that the induction variable is initialized to 0. The loop iterates over members of seg6_action_params, a global array of struct seg6_action_param calling their put() function pointer members. seg6_action_param uses an array initializer to initialize SEG6_LOCAL_SRH and later elements, which is the third enumeration of an anonymous union. The guard `if (attrs & SEG6_F_ATTR(i))` may prevent this from being called at runtime, but it would still be UB for `seg6_action_params[0]->put` to be called; the unrolled loop will make the initial iterations unreachable, which LLVM will later rotate to fallthrough to the next function. Make this more obvious that this cannot happen to the compiler by initializing the loop induction variable to the minimum valid index that seg6_action_params is initialized to. Reported-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20220802161203.622293-1-ndesaulniers@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-05net: avoid overflow when rose /proc displays timer information.Francois Romieu
rose /proc code does not serialize timer accesses. Initial report by Bernard F6BVP Pidoux exhibits overflow amounting to 116 ticks on its HZ=250 system. Full timer access serialization would imho be overkill as rose /proc does not enforce consistency between displayed ROSE_STATE_XYZ and timer values during changes of state. The patch may also fix similar behavior in ax25 /proc, ax25 ioctl and netrom /proc as they all exhibit the same timer serialization policy. This point has not been reported though. The sole remaining use of ax25_display_timer - ax25 rtt valuation - may also perform marginally better but I have not analyzed it too deeply. Cc: Thomas DL9SAU Osterried <thomas@osterried.de> Link: https://lore.kernel.org/all/d5e93cc7-a91f-13d3-49a1-b50c11f0f811@free.fr/ Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Tested-by: Bernard Pidoux <f6bvp@free.fr> Link: https://lore.kernel.org/r/Yuk9vq7t7VhmnOXu@electric-eye.fr.zoreil.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-05netfilter: flowtable: fix incorrect Kconfig dependenciesPablo Neira Ayuso
Remove default to 'y', this infrastructure is not fundamental for the flowtable operational. Add a missing dependency on CONFIG_NF_FLOW_TABLE. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Fixes: b038177636f8 ("netfilter: nf_flow_table: count pending offload workqueue tasks") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-05netfilter: nf_tables: fix crash when nf_trace is enabledFlorian Westphal
do not access info->pkt when info->trace is not 1. nft_traceinfo is not initialized, except when tracing is enabled. The 'nft_trace_enabled' static key cannot be used for this, we must always check info->trace first. Pass nft_pktinfo directly to avoid this. Fixes: e34b9ed96ce3 ("netfilter: nf_tables: avoid skb access on nf_stolen") Reported-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-05Merge tag 'mm-stable-2022-08-03' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: "Most of the MM queue. A few things are still pending. Liam's maple tree rework didn't make it. This has resulted in a few other minor patch series being held over for next time. Multi-gen LRU still isn't merged as we were waiting for mapletree to stabilize. The current plan is to merge MGLRU into -mm soon and to later reintroduce mapletree, with a view to hopefully getting both into 6.1-rc1. Summary: - The usual batches of cleanups from Baoquan He, Muchun Song, Miaohe Lin, Yang Shi, Anshuman Khandual and Mike Rapoport - Some kmemleak fixes from Patrick Wang and Waiman Long - DAMON updates from SeongJae Park - memcg debug/visibility work from Roman Gushchin - vmalloc speedup from Uladzislau Rezki - more folio conversion work from Matthew Wilcox - enhancements for coherent device memory mapping from Alex Sierra - addition of shared pages tracking and CoW support for fsdax, from Shiyang Ruan - hugetlb optimizations from Mike Kravetz - Mel Gorman has contributed some pagealloc changes to improve latency and realtime behaviour. - mprotect soft-dirty checking has been improved by Peter Xu - Many other singleton patches all over the place" [ XFS merge from hell as per Darrick Wong in https://lore.kernel.org/all/YshKnxb4VwXycPO8@magnolia/ ] * tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (282 commits) tools/testing/selftests/vm/hmm-tests.c: fix build mm: Kconfig: fix typo mm: memory-failure: convert to pr_fmt() mm: use is_zone_movable_page() helper hugetlbfs: fix inaccurate comment in hugetlbfs_statfs() hugetlbfs: cleanup some comments in inode.c hugetlbfs: remove unneeded header file hugetlbfs: remove unneeded hugetlbfs_ops forward declaration hugetlbfs: use helper macro SZ_1{K,M} mm: cleanup is_highmem() mm/hmm: add a test for cross device private faults selftests: add soft-dirty into run_vmtests.sh selftests: soft-dirty: add test for mprotect mm/mprotect: fix soft-dirty check in can_change_pte_writable() mm: memcontrol: fix potential oom_lock recursion deadlock mm/gup.c: fix formatting in check_and_migrate_movable_page() xfs: fail dax mount if reflink is enabled on a partition mm/memcontrol.c: remove the redundant updating of stats_flush_threshold userfaultfd: don't fail on unrecognized features hugetlb_cgroup: fix wrong hugetlb cgroup numa stat ...
2022-08-05Merge tag 'trace-v6.0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: - Runtime verification infrastructure This is the biggest change here. It introduces the runtime verification that is necessary for running Linux on safety critical systems. It allows for deterministic automata models to be inserted into the kernel that will attach to tracepoints, where the information on these tracepoints will move the model from state to state. If a state is encountered that does not belong to the model, it will then activate a given reactor, that could just inform the user or even panic the kernel (for which safety critical systems will detect and can recover from). - Two monitor models are also added: Wakeup In Preemptive (WIP - not to be confused with "work in progress"), and Wakeup While Not Running (WWNR). - Added __vstring() helper to the TRACE_EVENT() macro to replace several vsnprintf() usages that were all doing it wrong. - eprobes now can have their event autogenerated when the event name is left off. - The rest is various cleanups and fixes. * tag 'trace-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (50 commits) rv: Unlock on error path in rv_unregister_reactor() tracing: Use alignof__(struct {type b;}) instead of offsetof() tracing/eprobe: Show syntax error logs in error_log file scripts/tracing: Fix typo 'the the' in comment tracepoints: It is CONFIG_TRACEPOINTS not CONFIG_TRACEPOINT tracing: Use free_trace_buffer() in allocate_trace_buffers() tracing: Use a struct alignof to determine trace event field alignment rv/reactor: Add the panic reactor rv/reactor: Add the printk reactor rv/monitor: Add the wwnr monitor rv/monitor: Add the wip monitor rv/monitor: Add the wip monitor skeleton created by dot2k Documentation/rv: Add deterministic automata instrumentation documentation Documentation/rv: Add deterministic automata monitor synthesis documentation tools/rv: Add dot2k Documentation/rv: Add deterministic automaton documentation tools/rv: Add dot2c Documentation/rv: Add a basic documentation rv/include: Add instrumentation helper functions rv/include: Add deterministic automata monitor definition via C macros ...
2022-08-05mptcp: do not queue data on closed subflowsPaolo Abeni
Dipanjan reported a syzbot splat at close time: WARNING: CPU: 1 PID: 10818 at net/ipv4/af_inet.c:153 inet_sock_destruct+0x6d0/0x8e0 net/ipv4/af_inet.c:153 Modules linked in: uio_ivshmem(OE) uio(E) CPU: 1 PID: 10818 Comm: kworker/1:16 Tainted: G OE 5.19.0-rc6-g2eae0556bb9d #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Workqueue: events mptcp_worker RIP: 0010:inet_sock_destruct+0x6d0/0x8e0 net/ipv4/af_inet.c:153 Code: 21 02 00 00 41 8b 9c 24 28 02 00 00 e9 07 ff ff ff e8 34 4d 91 f9 89 ee 4c 89 e7 e8 4a 47 60 ff e9 a6 fc ff ff e8 20 4d 91 f9 <0f> 0b e9 84 fe ff ff e8 14 4d 91 f9 0f 0b e9 d4 fd ff ff e8 08 4d RSP: 0018:ffffc9001b35fa78 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000002879d0 RCX: ffff8881326f3b00 RDX: 0000000000000000 RSI: ffff8881326f3b00 RDI: 0000000000000002 RBP: ffff888179662674 R08: ffffffff87e983a0 R09: 0000000000000000 R10: 0000000000000005 R11: 00000000000004ea R12: ffff888179662400 R13: ffff888179662428 R14: 0000000000000001 R15: ffff88817e38e258 FS: 0000000000000000(0000) GS:ffff8881f5f00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020007bc0 CR3: 0000000179592000 CR4: 0000000000150ee0 Call Trace: <TASK> __sk_destruct+0x4f/0x8e0 net/core/sock.c:2067 sk_destruct+0xbd/0xe0 net/core/sock.c:2112 __sk_free+0xef/0x3d0 net/core/sock.c:2123 sk_free+0x78/0xa0 net/core/sock.c:2134 sock_put include/net/sock.h:1927 [inline] __mptcp_close_ssk+0x50f/0x780 net/mptcp/protocol.c:2351 __mptcp_destroy_sock+0x332/0x760 net/mptcp/protocol.c:2828 mptcp_worker+0x5d2/0xc90 net/mptcp/protocol.c:2586 process_one_work+0x9cc/0x1650 kernel/workqueue.c:2289 worker_thread+0x623/0x1070 kernel/workqueue.c:2436 kthread+0x2e9/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302 </TASK> The root cause of the problem is that an mptcp-level (re)transmit can race with mptcp_close() and the packet scheduler checks the subflow state before acquiring the socket lock: we can try to (re)transmit on an already closed ssk. Fix the issue checking again the subflow socket status under the subflow socket lock protection. Additionally add the missing check for the fallback-to-tcp case. Fixes: d5f49190def6 ("mptcp: allow picking different xmit subflows") Reported-by: Dipanjan Das <mail.dipanjan.das@gmail.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-05mptcp: move subflow cleanup in mptcp_destroy_common()Paolo Abeni
If the mptcp socket creation fails due to a CGROUP_INET_SOCK_CREATE eBPF program, the MPTCP protocol ends-up leaking all the subflows: the related cleanup happens in __mptcp_destroy_sock() that is not invoked in such code path. Address the issue moving the subflow sockets cleanup in the mptcp_destroy_common() helper, which is invoked in every msk cleanup path. Additionally get rid of the intermediate list_splice_init step, which is an unneeded relic from the past. The issue is present since before the reported root cause commit, but any attempt to backport the fix before that hash will require a complete rewrite. Fixes: e16163b6e2 ("mptcp: refactor shutdown and close") Reported-by: Nguyen Dinh Phi <phind.uet@gmail.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Co-developed-by: Nguyen Dinh Phi <phind.uet@gmail.com> Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-04Merge tag 'spdx-6.0-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull SPDX updates from Greg KH: "Here is the set of SPDX comment updates for 6.0-rc1. Nothing huge here, just a number of updated SPDX license tags and cleanups based on the review of a number of common patterns in GPLv2 boilerplate text. Also included in here are a few other minor updates, two USB files, and one Documentation file update to get the SPDX lines correct. All of these have been in the linux-next tree for a very long time" * tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits) Documentation: samsung-s3c24xx: Add blank line after SPDX directive x86/crypto: Remove stray comment terminator treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2) treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1) treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE ...
2022-08-04Merge tag 'driver-core-6.0-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core / kernfs updates from Greg KH: "Here is the set of driver core and kernfs changes for 6.0-rc1. The "biggest" thing in here is some scalability improvements for kernfs for large systems. Other than that, included in here are: - arch topology and cache info changes that have been reviewed and discussed a lot. - potential error path cleanup fixes - deferred driver probe cleanups - firmware loader cleanups and tweaks - documentation updates - other small things All of these have been in the linux-next tree for a while with no reported problems" * tag 'driver-core-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (63 commits) docs: embargoed-hardware-issues: fix invalid AMD contact email firmware_loader: Replace kmap() with kmap_local_page() sysfs docs: ABI: Fix typo in comment kobject: fix Kconfig.debug "its" grammar kernfs: Fix typo 'the the' in comment docs: driver-api: firmware: add driver firmware guidelines. (v3) arch_topology: Fix cache attributes detection in the CPU hotplug path ACPI: PPTT: Leave the table mapped for the runtime usage cacheinfo: Use atomic allocation for percpu cache attributes drivers/base: fix userspace break from using bin_attributes for cpumap and cpulist MAINTAINERS: Change mentions of mpm to olivia docs: ABI: sysfs-devices-soc: Update Lee Jones' email address docs: ABI: sysfs-class-pwm: Update Lee Jones' email address Documentation/process: Add embargoed HW contact for LLVM Revert "kernfs: Change kernfs_notify_list to llist." ACPI: Remove the unused find_acpi_cpu_cache_topology() arch_topology: Warn that topology for nested clusters is not supported arch_topology: Add support for parsing sockets in /cpu-map arch_topology: Set cluster identifier in each core/thread from /cpu-map arch_topology: Limit span of cpu_clustergroup_mask() ...
2022-08-03net/sched: remove hacks added to dev_trans_start() for bonding to workVladimir Oltean
Now that the bonding driver keeps track of the last TX time of ARP and NS probes, we effectively revert the following commits: 32d3e51a82d4 ("net_sched: use macvlan real dev trans_start in dev_trans_start()") 07ce76aa9bcf ("net_sched: make dev_trans_start return vlan's real dev trans_start") Note that the approach of continuing to hack at this function would not get us very far, hence the desire to take a different approach. DSA is also a virtual device that uses NETIF_F_LLTX, but there, many uppers share the same lower (DSA master, i.e. the physical host port of a switch). By making dev_trans_start() on a DSA interface return the dev_trans_start() of the master, we effectively assume that all other DSA interfaces are silent, otherwise this corrupts the validity of the probe timestamp data from the bonding driver's perspective. Furthermore, the hacks didn't take into consideration the fact that the lower interface of @dev may not have been physical either. For example, VLAN over VLAN, or DSA with 2 masters in a LAG. And even furthermore, there are NETIF_F_LLTX devices which are not stacked, like veth. The hack here would not work with those, because it would not have to provide the bonding driver something to chew at all. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-03Merge tag 'net-next-6.0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking changes from Paolo Abeni: "Core: - Refactor the forward memory allocation to better cope with memory pressure with many open sockets, moving from a per socket cache to a per-CPU one - Replace rwlocks with RCU for better fairness in ping, raw sockets and IP multicast router. - Network-side support for IO uring zero-copy send. - A few skb drop reason improvements, including codegen the source file with string mapping instead of using macro magic. - Rename reference tracking helpers to a more consistent netdev_* schema. - Adapt u64_stats_t type to address load/store tearing issues. - Refine debug helper usage to reduce the log noise caused by bots. BPF: - Improve socket map performance, avoiding skb cloning on read operation. - Add support for 64 bits enum, to match types exposed by kernel. - Introduce support for sleepable uprobes program. - Introduce support for enum textual representation in libbpf. - New helpers to implement synproxy with eBPF/XDP. - Improve loop performances, inlining indirect calls when possible. - Removed all the deprecated libbpf APIs. - Implement new eBPF-based LSM flavor. - Add type match support, which allow accurate queries to the eBPF used types. - A few TCP congetsion control framework usability improvements. - Add new infrastructure to manipulate CT entries via eBPF programs. - Allow for livepatch (KLP) and BPF trampolines to attach to the same kernel function. Protocols: - Introduce per network namespace lookup tables for unix sockets, increasing scalability and reducing contention. - Preparation work for Wi-Fi 7 Multi-Link Operation (MLO) support. - Add support to forciby close TIME_WAIT TCP sockets via user-space tools. - Significant performance improvement for the TLS 1.3 receive path, both for zero-copy and not-zero-copy. - Support for changing the initial MTPCP subflow priority/backup status - Introduce virtually contingus buffers for sockets over RDMA, to cope better with memory pressure. - Extend CAN ethtool support with timestamping capabilities - Refactor CAN build infrastructure to allow building only the needed features. Driver API: - Remove devlink mutex to allow parallel commands on multiple links. - Add support for pause stats in distributed switch. - Implement devlink helpers to query and flash line cards. - New helper for phy mode to register conversion. New hardware / drivers: - Ethernet DSA driver for the rockchip mt7531 on BPI-R2 Pro. - Ethernet DSA driver for the Renesas RZ/N1 A5PSW switch. - Ethernet DSA driver for the Microchip LAN937x switch. - Ethernet PHY driver for the Aquantia AQR113C EPHY. - CAN driver for the OBD-II ELM327 interface. - CAN driver for RZ/N1 SJA1000 CAN controller. - Bluetooth: Infineon CYW55572 Wi-Fi plus Bluetooth combo device. Drivers: - Intel Ethernet NICs: - i40e: add support for vlan pruning - i40e: add support for XDP framented packets - ice: improved vlan offload support - ice: add support for PPPoE offload - Mellanox Ethernet (mlx5) - refactor packet steering offload for performance and scalability - extend support for TC offload - refactor devlink code to clean-up the locking schema - support stacked vlans for bridge offloads - use TLS objects pool to improve connection rate - Netronome Ethernet NICs (nfp): - extend support for IPv6 fields mangling offload - add support for vepa mode in HW bridge - better support for virtio data path acceleration (VDPA) - enable TSO by default - Microsoft vNIC driver (mana) - add support for XDP redirect - Others Ethernet drivers: - bonding: add per-port priority support - microchip lan743x: extend phy support - Fungible funeth: support UDP segmentation offload and XDP xmit - Solarflare EF100: add support for virtual function representors - MediaTek SoC: add XDP support - Mellanox Ethernet/IB switch (mlxsw): - dropped support for unreleased H/W (XM router). - improved stats accuracy - unified bridge model coversion improving scalability (parts 1-6) - support for PTP in Spectrum-2 asics - Broadcom PHYs - add PTP support for BCM54210E - add support for the BCM53128 internal PHY - Marvell Ethernet switches (prestera): - implement support for multicast forwarding offload - Embedded Ethernet switches: - refactor OcteonTx MAC filter for better scalability - improve TC H/W offload for the Felix driver - refactor the Microchip ksz8 and ksz9477 drivers to share the probe code (parts 1, 2), add support for phylink mac configuration - Other WiFi: - Microchip wilc1000: diable WEP support and enable WPA3 - Atheros ath10k: encapsulation offload support Old code removal: - Neterion vxge ethernet driver: this is untouched since more than 10 years" * tag 'net-next-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1890 commits) doc: sfp-phylink: Fix a broken reference wireguard: selftests: support UML wireguard: allowedips: don't corrupt stack when detecting overflow wireguard: selftests: update config fragments wireguard: ratelimiter: use hrtimer in selftest net/mlx5e: xsk: Discard unaligned XSK frames on striding RQ net: usb: ax88179_178a: Bind only to vendor-specific interface selftests: net: fix IOAM test skip return code net: usb: make USB_RTL8153_ECM non user configurable net: marvell: prestera: remove reduntant code octeontx2-pf: Reduce minimum mtu size to 60 net: devlink: Fix missing mutex_unlock() call net/tls: Remove redundant workqueue flush before destroy net: txgbe: Fix an error handling path in txgbe_probe() net: dsa: Fix spelling mistakes and cleanup code Documentation: devlink: add add devlink-selftests to the table of contents dccp: put dccp_qpolicy_full() and dccp_qpolicy_push() in the same lock net: ionic: fix error check for vlan flags in ionic_set_nic_features() net: ice: fix error NETIF_F_HW_VLAN_CTAG_FILTER check in ice_vsi_sync_fltr() nfp: flower: add support for tunnel offload without key ID ...
2022-08-03Merge tag 'pull-work.9p' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull 9p iov_iter fix from Al Viro: "net/9p abuses iov_iter primitives - it attempts to copy _from_ a destination-only iov_iter when it handles Rerror arriving in reply to zero-copy request. Not hard to fix, fortunately. This is a prereq for the iov_iter_get_pages() work in the second part of iov_iter series, ended up in a separate branch" * tag 'pull-work.9p' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: 9p: handling Rerror without copy_from_iter_full()
2022-08-03libceph: clean up ceph_osdc_start_request prototypeJeff Layton
This function always returns 0, and ignores the nofail boolean. Drop the nofail argument, make the function void return and fix up the callers. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2022-08-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
Conflicts: net/ax25/af_ax25.c d7c4c9e075f8c ("ax25: fix incorrect dev_tracker usage") d62607c3fe459 ("net: rename reference+tracking helpers") drivers/net/netdevsim/fib.c 180a6a3ee60a ("netdevsim: fib: Fix reference count leak on route deletion failure") 012ec02ae441 ("netdevsim: convert driver to use unlocked devlink API during init/fini") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-02Merge tag 'v5.20-p1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Make proc files report fips module name and version Algorithms: - Move generic SHA1 code into lib/crypto - Implement Chinese Remainder Theorem for RSA - Remove blake2s - Add XCTR with x86/arm64 acceleration - Add POLYVAL with x86/arm64 acceleration - Add HCTR2 - Add ARIA Drivers: - Add support for new CCP/PSP device ID in ccp" * tag 'v5.20-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (89 commits) crypto: tcrypt - Remove the static variable initialisations to NULL crypto: arm64/poly1305 - fix a read out-of-bound crypto: hisilicon/zip - Use the bitmap API to allocate bitmaps crypto: hisilicon/sec - fix auth key size error crypto: ccree - Remove a useless dma_supported() call crypto: ccp - Add support for new CCP/PSP device ID crypto: inside-secure - Add missing MODULE_DEVICE_TABLE for of crypto: hisilicon/hpre - don't use GFP_KERNEL to alloc mem during softirq crypto: testmgr - some more fixes to RSA test vectors cyrpto: powerpc/aes - delete the rebundant word "block" in comments hwrng: via - Fix comment typo crypto: twofish - Fix comment typo crypto: rmd160 - fix Kconfig "its" grammar crypto: keembay-ocs-ecc - Drop if with an always false condition Documentation: qat: rewrite description Documentation: qat: Use code block for qat sysfs example crypto: lib - add module license to libsha1 crypto: lib - make the sha1 library optional crypto: lib - move lib/sha1.c into lib/crypto/ crypto: fips - make proc files report fips module name and version ...
2022-08-03libceph: fix ceph_pagelist_reserve() comment typoJason Wang
The double `without' is duplicated in the comment, remove one. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2022-08-03libceph: print fsid and epoch with osd idDaichi Mukai
Print fsid and epoch in libceph log messages to distinct from which each message come. [ idryomov: don't bother with gid for now, print epoch instead ] Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com> Signed-off-by: Daichi Mukai <daichi-mukai@cybozu.co.jp> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2022-08-03libceph: check pointer before assigned to "c->rules[]"Li Qiong
It should be better to check pointer firstly, then assign it to c->rules[]. Refine code a little bit. Signed-off-by: Li Qiong <liqiong@nfschina.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2022-08-02Merge tag 'for-5.20/io_uring-zerocopy-send-2022-07-29' of ↵Linus Torvalds
git://git.kernel.dk/linux-block Pull io_uring zerocopy support from Jens Axboe: "This adds support for efficient support for zerocopy sends through io_uring. Both ipv4 and ipv6 is supported, as well as both TCP and UDP. The core network changes to support this is in a stable branch from Jakub that both io_uring and net-next has pulled in, and the io_uring changes are layered on top of that. All of the work has been done by Pavel" * tag 'for-5.20/io_uring-zerocopy-send-2022-07-29' of git://git.kernel.dk/linux-block: (34 commits) io_uring: notification completion optimisation io_uring: export req alloc from core io_uring/net: use unsigned for flags io_uring/net: make page accounting more consistent io_uring/net: checks errors of zc mem accounting io_uring/net: improve io_get_notif_slot types selftests/io_uring: test zerocopy send io_uring: enable managed frags with register buffers io_uring: add zc notification flush requests io_uring: rename IORING_OP_FILES_UPDATE io_uring: flush notifiers after sendzc io_uring: sendzc with fixed buffers io_uring: allow to pass addr into sendzc io_uring: account locked pages for non-fixed zc io_uring: wire send zc request type io_uring: add notification slot registration io_uring: add rsrc referencing for notifiers io_uring: complete notifiers in tw io_uring: cache struct io_notif io_uring: add zc notification infrastructure ...
2022-08-02Merge tag 'for-5.20/io_uring-2022-07-29' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull io_uring updates from Jens Axboe: - As per (valid) complaint in the last merge window, fs/io_uring.c has grown quite large these days. io_uring isn't really tied to fs either, as it supports a wide variety of functionality outside of that. Move the code to io_uring/ and split it into files that either implement a specific request type, and split some code into helpers as well. The code is organized a lot better like this, and io_uring.c is now < 4K LOC (me). - Deprecate the epoll_ctl opcode. It'll still work, just trigger a warning once if used. If we don't get any complaints on this, and I don't expect any, then we can fully remove it in a future release (me). - Improve the cancel hash locking (Hao) - kbuf cleanups (Hao) - Efficiency improvements to the task_work handling (Dylan, Pavel) - Provided buffer improvements (Dylan) - Add support for recv/recvmsg multishot support. This is similar to the accept (or poll) support for have for multishot, where a single SQE can trigger everytime data is received. For applications that expect to do more than a few receives on an instantiated socket, this greatly improves efficiency (Dylan). - Efficiency improvements for poll handling (Pavel) - Poll cancelation improvements (Pavel) - Allow specifiying a range for direct descriptor allocations (Pavel) - Cleanup the cqe32 handling (Pavel) - Move io_uring types to greatly cleanup the tracing (Pavel) - Tons of great code cleanups and improvements (Pavel) - Add a way to do sync cancelations rather than through the sqe -> cqe interface, as that's a lot easier to use for some use cases (me). - Add support to IORING_OP_MSG_RING for sending direct descriptors to a different ring. This avoids the usually problematic SCM case, as we disallow those. (me) - Make the per-command alloc cache we use for apoll generic, place limits on it, and use it for netmsg as well (me). - Various cleanups (me, Michal, Gustavo, Uros) * tag 'for-5.20/io_uring-2022-07-29' of git://git.kernel.dk/linux-block: (172 commits) io_uring: ensure REQ_F_ISREG is set async offload net: fix compat pointer in get_compat_msghdr() io_uring: Don't require reinitable percpu_ref io_uring: fix types in io_recvmsg_multishot_overflow io_uring: Use atomic_long_try_cmpxchg in __io_account_mem io_uring: support multishot in recvmsg net: copy from user before calling __get_compat_msghdr net: copy from user before calling __copy_msghdr io_uring: support 0 length iov in buffer select in compat io_uring: fix multishot ending when not polled io_uring: add netmsg cache io_uring: impose max limit on apoll cache io_uring: add abstraction around apoll cache io_uring: move apoll cache to poll.c io_uring: consolidate hash_locked io-wq handling io_uring: clear REQ_F_HASH_LOCKED on hash removal io_uring: don't race double poll setting REQ_F_ASYNC_DATA io_uring: don't miss setting REQ_F_DOUBLE_POLL io_uring: disable multishot recvmsg io_uring: only trace one of complete or overflow ...
2022-08-01net: devlink: Fix missing mutex_unlock() callAmmar Faizi
Commit 2dec18ad826f forgets to call mutex_unlock() before the function returns in the error path: New smatch warnings: net/core/devlink.c:6392 devlink_nl_cmd_region_new() warn: inconsistent \ returns '&region->snapshot_lock'. Make sure we call mutex_unlock() in this error path. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 2dec18ad826f ("net: devlink: remove region snapshots list dependency on devlink->lock") Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20220801115742.1309329-1-ammar.faizi@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-01net/tls: Remove redundant workqueue flush before destroyTariq Toukan
destroy_workqueue() safely destroys the workqueue after draining it. No need for the explicit call to flush_workqueue(). Remove it. Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20220801112444.26175-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-01net: dsa: Fix spelling mistakes and cleanup codeXie Shaowen
fix follow spelling misktakes: desconstructed ==> deconstructed enforcment ==> enforcement Reported-by: Hacash Robot <hacashRobot@santino.com> Signed-off-by: Xie Shaowen <studentxswpy@163.com> Link: https://lore.kernel.org/r/20220730092254.3102875-1-studentxswpy@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-01dccp: put dccp_qpolicy_full() and dccp_qpolicy_push() in the same lockHangyu Hua
In the case of sk->dccps_qpolicy == DCCPQ_POLICY_PRIO, dccp_qpolicy_full will drop a skb when qpolicy is full. And the lock in dccp_sendmsg is released before sock_alloc_send_skb and then relocked after sock_alloc_send_skb. The following conditions may lead dccp_qpolicy_push to add skb to an already full sk_write_queue: thread1--->lock thread1--->dccp_qpolicy_full: queue is full. drop a skb thread1--->unlock thread2--->lock thread2--->dccp_qpolicy_full: queue is not full. no need to drop. thread2--->unlock thread1--->lock thread1--->dccp_qpolicy_push: add a skb. queue is full. thread1--->unlock thread2--->lock thread2--->dccp_qpolicy_push: add a skb! thread2--->unlock Fix this by moving dccp_qpolicy_full. Fixes: b1308dc015eb ("[DCCP]: Set TX Queue Length Bounds via Sysctl") Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Link: https://lore.kernel.org/r/20220729110027.40569-1-hbh25y@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-01net: rose: add netdev ref tracker to 'struct rose_sock'Eric Dumazet
This will help debugging netdevice refcount problems with CONFIG_NET_DEV_REFCNT_TRACKER=y Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Tested-by: Bernard Pidoux <f6bvp@free.fr> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-01net: rose: fix netdev reference changesEric Dumazet
Bernard reported that trying to unload rose module would lead to infamous messages: unregistered_netdevice: waiting for rose0 to become free. Usage count = xx This patch solves the issue, by making sure each socket referring to a netdevice holds a reference count on it, and properly releases it in rose_release(). rose_dev_first() is also fixed to take a device reference before leaving the rcu_read_locked section. Following patch will add ref_tracker annotations to ease future bug hunting. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Bernard Pidoux <f6bvp@free.fr> Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Bernard Pidoux <f6bvp@free.fr> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-01net: devlink: enable parallel ops on netlink interfaceJiri Pirko
As the devlink_mutex was removed and all devlink instances are protected individually by devlink->lock mutex, allow the netlink ops to run in parallel and therefore allow user to execute commands on multiple devlink instances simultaneously. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-01net: devlink: remove devlink_mutexJiri Pirko
All accesses to devlink structure from userspace and drivers are locked with devlink->lock instance mutex. Also, devlinks xa_array iteration is taken care of by iteration helpers taking devlink reference. Therefore, remove devlink_mutex as it is no longer needed. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-01net: devlink: convert reload command to take implicit devlink->lockJiri Pirko
Convert reload command to behave the same way as the rest of the commands and let if be called with devlink->lock held. Remove the temporary devl_lock taking from drivers. As the DEVLINK_NL_FLAG_NO_LOCK flag is no longer used, remove it alongside. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-01net: devlink: introduce "unregistering" mark and use it during devlinks ↵Jiri Pirko
iteration Add new mark called "unregistering" to be set at the beginning of devlink_unregister() function. Check this mark during devlinks iteration in order to prevent getting a reference of devlink which is being currently unregistered. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-01udp: Remove redundant __udp_sysctl_init() call from udp_init().Kuniyuki Iwashima
__udp_sysctl_init() is called for init_net via udp_sysctl_ops. While at it, we can rename __udp_sysctl_init() to udp_sysctl_init(). Fixes: 1e8029515816 ("udp: Move the udp sysctl to namespace.") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-01net/rds: Use PTR_ERR instead of IS_ERR for rdsdebug()Li Qiong
If 'local_odp_mr->r_trans_private' is a error code, it is better to print the error code than to print the value of IS_ERR(). Signed-off-by: Li Qiong <liqiong@nfschina.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-30batman-adv: tracing: Use the new __vstring() helperSteven Rostedt (Google)
Instead of open coding a __dynamic_array() with a fixed length (which defeats the purpose of the dynamic array in the first place). Use the new __vstring() helper that will use a va_list and only write enough of the string into the ring buffer that is needed. Link: https://lkml.kernel.org/r/20220724191650.236b1355@rorschach.local.home Cc: Marek Lindner <mareklindner@neomailbox.ch> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Simon Wunderlich <sw@simonwunderlich.de> Cc: Antonio Quartulli <a@unstable.cc> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: b.a.t.m.a.n@lists.open-mesh.org Cc: netdev@vger.kernel.org Acked-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-07-29dn_route: replace "jiffies-now>0" with "jiffies!=now"Yu Zhe
Use "jiffies != now" to replace "jiffies - now > 0" to make code more readable. We want to put a limit on how long the loop can run for before rescheduling. Signed-off-by: Yu Zhe <yuzhe@nfschina.com> Link: https://lore.kernel.org/r/20220729061712.22666-1-yuzhe@nfschina.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-29Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski
Andrii Nakryiko says: ==================== bpf-next 2022-07-29 We've added 22 non-merge commits during the last 4 day(s) which contain a total of 27 files changed, 763 insertions(+), 120 deletions(-). The main changes are: 1) Fixes to allow setting any source IP with bpf_skb_set_tunnel_key() helper, from Paul Chaignon. 2) Fix for bpf_xdp_pointer() helper when doing sanity checking, from Joanne Koong. 3) Fix for XDP frame length calculation, from Lorenzo Bianconi. 4) Libbpf BPF_KSYSCALL docs improvements and fixes to selftests to accommodate s390x quirks with socketcall(), from Ilya Leoshkevich. 5) Allow/denylist and CI configs additions to selftests/bpf to improve BPF CI, from Daniel Müller. 6) BPF trampoline + ftrace follow up fixes, from Song Liu and Xu Kuohai. 7) Fix allocation warnings in netdevsim, from Jakub Kicinski. 8) bpf_obj_get_opts() libbpf API allowing to provide file flags, from Joe Burton. 9) vsnprintf usage fix in bpf_snprintf_btf(), from Fedor Tokarev. 10) Various small fixes and clean ups, from Daniel Müller, Rongguang Wei, Jörn-Thorben Hinz, Yang Li. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (22 commits) bpf: Remove unneeded semicolon libbpf: Add bpf_obj_get_opts() netdevsim: Avoid allocation warnings triggered from user space bpf: Fix NULL pointer dereference when registering bpf trampoline bpf: Fix test_progs -j error with fentry/fexit tests selftests/bpf: Bump internal send_signal/send_signal_tracepoint timeout bpftool: Don't try to return value from void function in skeleton bpftool: Replace sizeof(arr)/sizeof(arr[0]) with ARRAY_SIZE macro bpf: btf: Fix vsnprintf return value check libbpf: Support PPC in arch_specific_syscall_pfx selftests/bpf: Adjust vmtest.sh to use local kernel configuration selftests/bpf: Copy over libbpf configs selftests/bpf: Sort configuration selftests/bpf: Attach to socketcall() in test_probe_user libbpf: Extend BPF_KSYSCALL documentation bpf, devmap: Compute proper xdp_frame len redirecting frames bpf: Fix bpf_xdp_pointer return pointer selftests/bpf: Don't assign outer source IP to host bpf: Set flow flag to allow any source IP in bpf_tunnel_key geneve: Use ip_tunnel_key flow flags in route lookups ... ==================== Link: https://lore.kernel.org/r/20220729230948.1313527-1-andrii@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-29SUNRPC: Expand the svc_alloc_arg_err tracepointChuck Lever
Record not only the number of pages requested, but the number of pages that were actually allocated, to get a measure of progress (or lack thereof). Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2022-07-29seg6: add support for SRv6 H.L2Encaps.Red behaviorAndrea Mayer
The SRv6 H.L2Encaps.Red behavior described in [1] is an optimization of the SRv6 H.L2Encaps behavior [2]. H.L2Encaps.Red reduces the length of the SRH by excluding the first segment (SID) in the SRH of the pushed IPv6 header. The first SID is only placed in the IPv6 Destination Address field of the pushed IPv6 header. When the SRv6 Policy only contains one SID the SRH is omitted, unless there is an HMAC TLV to be carried. [1] - https://datatracker.ietf.org/doc/html/rfc8986#section-5.4 [2] - https://datatracker.ietf.org/doc/html/rfc8986#section-5.3 Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it> Signed-off-by: Anton Makarov <anton.makarov11235@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-29seg6: add support for SRv6 H.Encaps.Red behaviorAndrea Mayer
The SRv6 H.Encaps.Red behavior described in [1] is an optimization of the SRv6 H.Encaps behavior [2]. H.Encaps.Red reduces the length of the SRH by excluding the first segment (SID) in the SRH of the pushed IPv6 header. The first SID is only placed in the IPv6 Destination Address field of the pushed IPv6 header. When the SRv6 Policy only contains one SID the SRH is omitted, unless there is an HMAC TLV to be carried. [1] - https://datatracker.ietf.org/doc/html/rfc8986#section-5.2 [2] - https://datatracker.ietf.org/doc/html/rfc8986#section-5.1 Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it> Signed-off-by: Anton Makarov <anton.makarov11235@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-29net/af_packet: check len when min_header_len equals to 0Zhengchao Shao
User can use AF_PACKET socket to send packets with the length of 0. When min_header_len equals to 0, packet_snd will call __dev_queue_xmit to send packets, and sock->type can be any type. Reported-by: syzbot+5ea725c25d06fb9114c4@syzkaller.appspotmail.com Fixes: fd1894224407 ("bpf: Don't redirect packets with invalid pkt_len") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-28ax25: fix incorrect dev_tracker usageEric Dumazet
While investigating a separate rose issue [1], and enabling CONFIG_NET_DEV_REFCNT_TRACKER=y, Bernard reported an orthogonal ax25 issue [2] An ax25_dev can be used by one (or many) struct ax25_cb. We thus need different dev_tracker, one per struct ax25_cb. After this patch is applied, we are able to focus on rose. [1] https://lore.kernel.org/netdev/fb7544a1-f42e-9254-18cc-c9b071f4ca70@free.fr/ [2] [ 205.798723] reference already released. [ 205.798732] allocated in: [ 205.798734] ax25_bind+0x1a2/0x230 [ax25] [ 205.798747] __sys_bind+0xea/0x110 [ 205.798753] __x64_sys_bind+0x18/0x20 [ 205.798758] do_syscall_64+0x5c/0x80 [ 205.798763] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 205.798768] freed in: [ 205.798770] ax25_release+0x115/0x370 [ax25] [ 205.798778] __sock_release+0x42/0xb0 [ 205.798782] sock_close+0x15/0x20 [ 205.798785] __fput+0x9f/0x260 [ 205.798789] ____fput+0xe/0x10 [ 205.798792] task_work_run+0x64/0xa0 [ 205.798798] exit_to_user_mode_prepare+0x18b/0x190 [ 205.798804] syscall_exit_to_user_mode+0x26/0x40 [ 205.798808] do_syscall_64+0x69/0x80 [ 205.798812] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 205.798827] ------------[ cut here ]------------ [ 205.798829] WARNING: CPU: 2 PID: 2605 at lib/ref_tracker.c:136 ref_tracker_free.cold+0x60/0x81 [ 205.798837] Modules linked in: rose netrom mkiss ax25 rfcomm cmac algif_hash algif_skcipher af_alg bnep snd_hda_codec_hdmi nls_iso8859_1 i915 rtw88_8821ce rtw88_8821c x86_pkg_temp_thermal rtw88_pci intel_powerclamp rtw88_core snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio coretemp snd_hda_intel kvm_intel snd_intel_dspcfg mac80211 snd_hda_codec kvm i2c_algo_bit drm_buddy drm_dp_helper btusb drm_kms_helper snd_hwdep btrtl snd_hda_core btbcm joydev crct10dif_pclmul btintel crc32_pclmul ghash_clmulni_intel mei_hdcp btmtk intel_rapl_msr aesni_intel bluetooth input_leds snd_pcm crypto_simd syscopyarea processor_thermal_device_pci_legacy sysfillrect cryptd intel_soc_dts_iosf snd_seq sysimgblt ecdh_generic fb_sys_fops rapl libarc4 processor_thermal_device intel_cstate processor_thermal_rfim cec snd_timer ecc snd_seq_device cfg80211 processor_thermal_mbox mei_me processor_thermal_rapl mei rc_core at24 snd intel_pch_thermal intel_rapl_common ttm soundcore int340x_thermal_zone video [ 205.798948] mac_hid acpi_pad sch_fq_codel ipmi_devintf ipmi_msghandler drm msr parport_pc ppdev lp parport ramoops pstore_blk reed_solomon pstore_zone efi_pstore ip_tables x_tables autofs4 hid_generic usbhid hid i2c_i801 i2c_smbus r8169 xhci_pci ahci libahci realtek lpc_ich xhci_pci_renesas [last unloaded: ax25] [ 205.798992] CPU: 2 PID: 2605 Comm: ax25ipd Not tainted 5.18.11-F6BVP #3 [ 205.798996] Hardware name: To be filled by O.E.M. To be filled by O.E.M./CK3, BIOS 5.011 09/16/2020 [ 205.798999] RIP: 0010:ref_tracker_free.cold+0x60/0x81 [ 205.799005] Code: e8 d2 01 9b ff 83 7b 18 00 74 14 48 c7 c7 2f d7 ff 98 e8 10 6e fc ff 8b 7b 18 e8 b8 01 9b ff 4c 89 ee 4c 89 e7 e8 5d fd 07 00 <0f> 0b b8 ea ff ff ff e9 30 05 9b ff 41 0f b6 f7 48 c7 c7 a0 fa 4e [ 205.799008] RSP: 0018:ffffaf5281073958 EFLAGS: 00010286 [ 205.799011] RAX: 0000000080000000 RBX: ffff9a0bd687ebe0 RCX: 0000000000000000 [ 205.799014] RDX: 0000000000000001 RSI: 0000000000000282 RDI: 00000000ffffffff [ 205.799016] RBP: ffffaf5281073a10 R08: 0000000000000003 R09: fffffffffffd5618 [ 205.799019] R10: 0000000000ffff10 R11: 000000000000000f R12: ffff9a0bc53384d0 [ 205.799022] R13: 0000000000000282 R14: 00000000ae000001 R15: 0000000000000001 [ 205.799024] FS: 0000000000000000(0000) GS:ffff9a0d0f300000(0000) knlGS:0000000000000000 [ 205.799028] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 205.799031] CR2: 00007ff6b8311554 CR3: 000000001ac10004 CR4: 00000000001706e0 [ 205.799033] Call Trace: [ 205.799035] <TASK> [ 205.799038] ? ax25_dev_device_down+0xd9/0x1b0 [ax25] [ 205.799047] ? ax25_device_event+0x9f/0x270 [ax25] [ 205.799055] ? raw_notifier_call_chain+0x49/0x60 [ 205.799060] ? call_netdevice_notifiers_info+0x52/0xa0 [ 205.799065] ? dev_close_many+0xc8/0x120 [ 205.799070] ? unregister_netdevice_many+0x13d/0x890 [ 205.799073] ? unregister_netdevice_queue+0x90/0xe0 [ 205.799076] ? unregister_netdev+0x1d/0x30 [ 205.799080] ? mkiss_close+0x7c/0xc0 [mkiss] [ 205.799084] ? tty_ldisc_close+0x2e/0x40 [ 205.799089] ? tty_ldisc_hangup+0x137/0x210 [ 205.799092] ? __tty_hangup.part.0+0x208/0x350 [ 205.799098] ? tty_vhangup+0x15/0x20 [ 205.799103] ? pty_close+0x127/0x160 [ 205.799108] ? tty_release+0x139/0x5e0 [ 205.799112] ? __fput+0x9f/0x260 [ 205.799118] ax25_dev_device_down+0xd9/0x1b0 [ax25] [ 205.799126] ax25_device_event+0x9f/0x270 [ax25] [ 205.799135] raw_notifier_call_chain+0x49/0x60 [ 205.799140] call_netdevice_notifiers_info+0x52/0xa0 [ 205.799146] dev_close_many+0xc8/0x120 [ 205.799152] unregister_netdevice_many+0x13d/0x890 [ 205.799157] unregister_netdevice_queue+0x90/0xe0 [ 205.799161] unregister_netdev+0x1d/0x30 [ 205.799165] mkiss_close+0x7c/0xc0 [mkiss] [ 205.799170] tty_ldisc_close+0x2e/0x40 [ 205.799173] tty_ldisc_hangup+0x137/0x210 [ 205.799178] __tty_hangup.part.0+0x208/0x350 [ 205.799184] tty_vhangup+0x15/0x20 [ 205.799188] pty_close+0x127/0x160 [ 205.799193] tty_release+0x139/0x5e0 [ 205.799199] __fput+0x9f/0x260 [ 205.799203] ____fput+0xe/0x10 [ 205.799208] task_work_run+0x64/0xa0 [ 205.799213] do_exit+0x33b/0xab0 [ 205.799217] ? __handle_mm_fault+0xc4f/0x15f0 [ 205.799224] do_group_exit+0x35/0xa0 [ 205.799228] __x64_sys_exit_group+0x18/0x20 [ 205.799232] do_syscall_64+0x5c/0x80 [ 205.799238] ? handle_mm_fault+0xba/0x290 [ 205.799242] ? debug_smp_processor_id+0x17/0x20 [ 205.799246] ? fpregs_assert_state_consistent+0x26/0x50 [ 205.799251] ? exit_to_user_mode_prepare+0x49/0x190 [ 205.799256] ? irqentry_exit_to_user_mode+0x9/0x20 [ 205.799260] ? irqentry_exit+0x33/0x40 [ 205.799263] ? exc_page_fault+0x87/0x170 [ 205.799268] ? asm_exc_page_fault+0x8/0x30 [ 205.799273] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 205.799277] RIP: 0033:0x7ff6b80eaca1 [ 205.799281] Code: Unable to access opcode bytes at RIP 0x7ff6b80eac77. [ 205.799283] RSP: 002b:00007fff6dfd4738 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 [ 205.799287] RAX: ffffffffffffffda RBX: 00007ff6b8215a00 RCX: 00007ff6b80eaca1 [ 205.799290] RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000001 [ 205.799293] RBP: 0000000000000001 R08: ffffffffffffff80 R09: 0000000000000028 [ 205.799295] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ff6b8215a00 [ 205.799298] R13: 0000000000000000 R14: 00007ff6b821aee8 R15: 00007ff6b821af00 [ 205.799304] </TASK> Fixes: feef318c855a ("ax25: fix UAF bugs of net_device caused by rebinding operation") Reported-by: Bernard F6BVP <f6bvp@free.fr> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Duoming Zhou <duoming@zju.edu.cn> Link: https://lore.kernel.org/r/20220728051821.3160118-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-28devlink: Hold the instance lock in health callbacksMoshe Shemesh
Let the core take the devlink instance lock around health callbacks and remove the now redundant locking in the drivers. Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-28net: devlink: remove region snapshots list dependency on devlink->lockJiri Pirko
After mlx4 driver is converted to do locked reload, devlink_region_snapshot_create() may be called from both locked and unlocked context. Note that in mlx4 region snapshots could be created on any command failure. That can happen in any flow that involves commands to FW, which means most of the driver flows. So resolve this by removing dependency on devlink->lock for region snapshots list consistency and introduce new mutex to ensure it. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-28net: devlink: remove region snapshot ID tracking dependency on devlink->lockJiri Pirko
After mlx4 driver is converted to do locked reload, functions to get/put regions snapshot ID may be called from both locked and unlocked context. So resolve this by removing dependency on devlink->lock for region snapshot ID tracking by using internal xa_lock() to maintain shapshot_ids xa_array consistency. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-28devlink: introduce framework for selftestsVikas Gupta
Add a framework for running selftests. Framework exposes devlink commands and test suite(s) to the user to execute and query the supported tests by the driver. Below are new entries in devlink_nl_ops devlink_nl_cmd_selftests_show_doit/dumpit: To query the supported selftests by the drivers. devlink_nl_cmd_selftests_run: To execute selftests. Users can provide a test mask for executing group tests or standalone tests. Documentation/networking/devlink/ path is already part of MAINTAINERS & the new files come under this path. Hence no update needed to the MAINTAINERS Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-28net/tls: Multi-threaded calls to TX tls_dev_delTariq Toukan
Multiple TLS device-offloaded contexts can be added in parallel via concurrent calls to .tls_dev_add, while calls to .tls_dev_del are sequential in tls_device_gc_task. This is not a sustainable behavior. This creates a rate gap between add and del operations (addition rate outperforms the deletion rate). When running for enough time, the TLS device resources could get exhausted, failing to offload new connections. Replace the single-threaded garbage collector work with a per-context alternative, so they can be handled on several cores in parallel. Use a new dedicated destruct workqueue for this. Tested with mlx5 device: Before: 22141 add/sec, 103 del/sec After: 11684 add/sec, 11684 del/sec Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-28net/tls: Perform immediate device ctx cleanup when possibleTariq Toukan
TLS context destructor can be run in atomic context. Cleanup operations for device-offloaded contexts could require access and interaction with the device callbacks, which might sleep. Hence, the cleanup of such contexts must be deferred and completed inside an async work. For all others, this is not necessary, as cleanup is atomic. Invoke cleanup immediately for them, avoiding queueing redundant gc work. Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-28tls: rx: Fix unsigned comparison with less than zeroYang Li
The return from the call to tls_rx_msg_size() is int, it can be a negative error code, however this is being assigned to an unsigned long variable 'sz', so making 'sz' an int. Eliminate the following coccicheck warning: ./net/tls/tls_strp.c:211:6-8: WARNING: Unsigned expression compared with zero: sz < 0 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/20220728031019.32838-1-yang.lee@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-28tls: rx: fix the false positive warningJakub Kicinski
I went too far in the accessor conversion, we can't use tls_strp_msg() after decryption because the message may not be ready. What we care about on this path is that the output skb is detached, i.e. we didn't somehow just turn around and used the input skb with its TCP data still attached. So look at the anchor directly. Fixes: 84c61fe1a75b ("tls: rx: do not use the standard strparser") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-28tls: strp: rename and multithread the workqueueJakub Kicinski
Paolo points out that there seems to be no strong reason strparser users a single threaded workqueue. Perhaps there were some performance or pinning considerations? Since we don't know (and it's the slow path) let's default to the most natural, multi-threaded choice. Also rename the workqueue to "tls-". Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-07-15 22:29:58 +0000