summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2025-04-15net: fib_rules: Fix iif / oif matching on L3 master deviceIdo Schimmel
Before commit 40867d74c374 ("net: Add l3mdev index to flow struct and avoid oif reset for port devices") it was possible to use FIB rules to match on a L3 domain. This was done by having a FIB rule match on iif / oif being a L3 master device. It worked because prior to the FIB rule lookup the iif / oif fields in the flow structure were reset to the index of the L3 master device to which the input / output device was enslaved to. The above scheme made it impossible to match on the original input / output device. Therefore, cited commit stopped overwriting the iif / oif fields in the flow structure and instead stored the index of the enslaving L3 master device in a new field ('flowi_l3mdev') in the flow structure. While the change enabled new use cases, it broke the original use case of matching on a L3 domain. Fix this by interpreting the iif / oif matching on a L3 master device as a match against the L3 domain. In other words, if the iif / oif in the FIB rule points to a L3 master device, compare the provided index against 'flowi_l3mdev' rather than 'flowi_{i,o}if'. Before cited commit, a FIB rule that matched on 'iif vrf1' would only match incoming traffic from devices enslaved to 'vrf1'. With the proposed change (i.e., comparing against 'flowi_l3mdev'), the rule would also match traffic originating from a socket bound to 'vrf1'. Avoid that by adding a new flow flag ('FLOWI_FLAG_L3MDEV_OIF') that indicates if the L3 domain was derived from the output interface or the input interface (when not set) and take this flag into account when evaluating the FIB rule against the flow structure. Avoid unnecessary checks in the data path by detecting that a rule matches on a L3 master device when the rule is installed and marking it as such. Tested using the following script [1]. Output before 40867d74c374 (v5.4.291): default dev dummy1 table 100 scope link default dev dummy1 table 200 scope link Output after 40867d74c374: default dev dummy1 table 300 scope link default dev dummy1 table 300 scope link Output with this patch: default dev dummy1 table 100 scope link default dev dummy1 table 200 scope link [1] #!/bin/bash ip link add name vrf1 up type vrf table 10 ip link add name dummy1 up master vrf1 type dummy sysctl -wq net.ipv4.conf.all.forwarding=1 sysctl -wq net.ipv4.conf.all.rp_filter=0 ip route add table 100 default dev dummy1 ip route add table 200 default dev dummy1 ip route add table 300 default dev dummy1 ip rule add prio 0 oif vrf1 table 100 ip rule add prio 1 iif vrf1 table 200 ip rule add prio 2 table 300 ip route get 192.0.2.1 oif dummy1 fibmatch ip route get 192.0.2.1 iif dummy1 from 198.51.100.1 fibmatch Fixes: 40867d74c374 ("net: Add l3mdev index to flow struct and avoid oif reset for port devices") Reported-by: hanhuihui <hanhuihui5@huawei.com> Closes: https://lore.kernel.org/netdev/ec671c4f821a4d63904d0da15d604b75@huawei.com/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20250414172022.242991-2-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-15can: fix missing decrement of j1939_proto.inuse_idxDavide Caratti
Like other protocols on top of AF_CAN family, also j1939_proto.inuse_idx needs to be decremented on socket dismantle. Fixes: 6bffe88452db ("can: add protocol counter for AF_CAN sockets") Reported-by: Oliver Hartkopp <socketcan@hartkopp.net> Closes: https://lore.kernel.org/linux-can/7e35b13f-bbc4-491e-9081-fb939e1b8df0@hartkopp.net/ Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://patch.msgid.link/09ce71f281b9e27d1e3d1104430bf3fceb8c7321.1742292636.git.dcaratti@redhat.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-04-14net: openvswitch: fix nested key length validation in the set() actionIlya Maximets
It's not safe to access nla_len(ovs_key) if the data is smaller than the netlink header. Check that the attribute is OK first. Fixes: ccb1352e76cf ("net: Add Open vSwitch kernel components.") Reported-by: syzbot+b07a9da40df1576b8048@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=b07a9da40df1576b8048 Tested-by: syzbot+b07a9da40df1576b8048@syzkaller.appspotmail.com Signed-off-by: Ilya Maximets <i.maximets@ovn.org> Reviewed-by: Eelco Chaudron <echaudro@redhat.com> Acked-by: Aaron Conole <aconole@redhat.com> Link: https://patch.msgid.link/20250412104052.2073688-1-i.maximets@ovn.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-14net: don't mix device locking in dev_close_many() callsJakub Kicinski
Lockdep found the following dependency: &dev_instance_lock_key#3 --> &rdev->wiphy.mtx --> &net->xdp.lock --> &xs->mutex --> &dev_instance_lock_key#3 The first dependency is the problem. wiphy mutex should be outside the instance locks. The problem happens in notifiers (as always) for CLOSE. We only hold the instance lock for ops locked devices during CLOSE, and WiFi netdevs are not ops locked. Unfortunately, when we dev_close_many() during netns dismantle we may be holding the instance lock of _another_ netdev when issuing a CLOSE for a WiFi device. Lockdep's "Possible unsafe locking scenario" only prints 3 locks and we have 4, plus I think we'd need 3 CPUs, like this: CPU0 CPU1 CPU2 ---- ---- ---- lock(&xs->mutex); lock(&dev_instance_lock_key#3); lock(&rdev->wiphy.mtx); lock(&net->xdp.lock); lock(&xs->mutex); lock(&rdev->wiphy.mtx); lock(&dev_instance_lock_key#3); Tho, I don't think that's possible as CPU1 and CPU2 would be under rtnl_lock. Even if we have per-netns rtnl_lock and wiphy can span network namespaces - CPU0 and CPU1 must be in the same netns to see dev_instance_lock, so CPU0 can't be installing a socket as CPU1 is tearing the netns down. Regardless, our expected lock ordering is that wiphy lock is taken before instance locks, so let's fix this. Go over the ops locked and non-locked devices separately. Note that calling dev_close_many() on an empty list is perfectly fine. All processing (including RCU syncs) are conditional on the list not being empty, already. Fixes: 7e4d784f5810 ("net: hold netdev instance lock during rtnetlink operations") Reported-by: syzbot+6f588c78bf765b62b450@syzkaller.appspotmail.com Acked-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250412233011.309762-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-12Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfLinus Torvalds
Pull bpf fixes from Alexei Starovoitov: - Followup fixes for resilient spinlock (Kumar Kartikeya Dwivedi): - Make res_spin_lock test less verbose, since it was spamming BPF CI on failure, and make the check for AA deadlock stronger - Fix rebasing mistake and use architecture provided res_smp_cond_load_acquire - Convert BPF maps (queue_stack and ringbuf) to resilient spinlock to address long standing syzbot reports - Make sure that classic BPF load instruction from SKF_[NET|LL]_OFF offsets works when skb is fragmeneted (Willem de Bruijn) * tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Convert ringbuf map to rqspinlock bpf: Convert queue_stack map to rqspinlock bpf: Use architecture provided res_smp_cond_load_acquire selftests/bpf: Make res_spin_lock AA test condition stronger selftests/net: test sk_filter support for SKF_NET_OFF on frags bpf: support SKF_NET_OFF and SKF_LL_OFF on skb frags selftests/bpf: Make res_spin_lock test less verbose
2025-04-11net: mctp: Set SOCK_RCU_FREEMatt Johnston
Bind lookup runs under RCU, so ensure that a socket doesn't go away in the middle of a lookup. Fixes: 833ef3b91de6 ("mctp: Populate socket implementation") Signed-off-by: Matt Johnston <matt@codeconstruct.com.au> Link: https://patch.msgid.link/20250410-mctp-rcu-sock-v1-1-872de9fdc877@codeconstruct.com.au Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-11ethtool: cmis_cdb: use correct rpl size in ethtool_cmis_module_poll()Damodharam Ammepalli
rpl is passed as a pointer to ethtool_cmis_module_poll(), so the correct size of rpl is sizeof(*rpl) which should be just 1 byte. Using the pointer size instead can cause stack corruption: Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ethtool_cmis_wait_for_cond+0xf4/0x100 CPU: 72 UID: 0 PID: 4440 Comm: kworker/72:2 Kdump: loaded Tainted: G OE 6.11.0 #24 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: Dell Inc. PowerEdge R760/04GWWM, BIOS 1.6.6 09/20/2023 Workqueue: events module_flash_fw_work Call Trace: <TASK> panic+0x339/0x360 ? ethtool_cmis_wait_for_cond+0xf4/0x100 ? __pfx_status_success+0x10/0x10 ? __pfx_status_fail+0x10/0x10 __stack_chk_fail+0x10/0x10 ethtool_cmis_wait_for_cond+0xf4/0x100 ethtool_cmis_cdb_execute_cmd+0x1fc/0x330 ? __pfx_status_fail+0x10/0x10 cmis_cdb_module_features_get+0x6d/0xd0 ethtool_cmis_cdb_init+0x8a/0xd0 ethtool_cmis_fw_update+0x46/0x1d0 module_flash_fw_work+0x17/0xa0 process_one_work+0x179/0x390 worker_thread+0x239/0x340 ? __pfx_worker_thread+0x10/0x10 kthread+0xcc/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2d/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Fixes: a39c84d79625 ("ethtool: cmis_cdb: Add a layer for supporting CDB commands") Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250409173312.733012-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-11Merge tag 'wireless-2025-04-11' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes Berg says: ==================== Just a handful of fixes, notably - iwlwifi: various build warning fixes (e.g. PM_SLEEP) - iwlwifi: fix operation when FW reset handshake times out - mac80211: drop pending frames on interface down * tag 'wireless-2025-04-11' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: Revert "wifi: mac80211: Update skb's control block key in ieee80211_tx_dequeue()" wifi: iwlwifi: mld: Restart firmware on iwl_mld_no_wowlan_resume() error wifi: iwlwifi: pcie: set state to no-FW before reset handshake wifi: wl1251: fix memory leak in wl1251_tx_work wifi: brcmfmac: fix memory leak in brcmf_get_module_param wifi: iwlwifi: mld: silence uninitialized variable warning wifi: mac80211: Purge vif txq in ieee80211_do_stop() wifi: mac80211: Update skb's control block key in ieee80211_tx_dequeue() wifi: at76c50x: fix use after free access in at76_disconnect wifi: add wireless list to MAINTAINERS iwlwifi: mld: fix building with CONFIG_PM_SLEEP disabled wifi: iwlwifi: mld: fix PM_SLEEP -Wundef warning wifi: iwlwifi: mld: reduce scope for uninitialized variable ==================== Link: https://patch.msgid.link/20250411142354.24419-3-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-11Merge tag 'for-net-2025-04-10' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - btrtl: Prevent potential NULL dereference - qca: fix NV variant for one of WCN3950 SoCs - l2cap: Check encryption key size on incoming connection - hci_event: Fix sending MGMT_EV_DEVICE_FOUND for invalid address - btnxpuart: Revert baudrate change in nxp_shutdown - btnxpuart: Add an error message if FW dump trigger fails - increment TX timestamping tskey always for stream sockets * tag 'for-net-2025-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: l2cap: Check encryption key size on incoming connection Bluetooth: btnxpuart: Add an error message if FW dump trigger fails Bluetooth: btnxpuart: Revert baudrate change in nxp_shutdown Bluetooth: increment TX timestamping tskey always for stream sockets Bluetooth: qca: fix NV variant for one of WCN3950 SoCs Bluetooth: btrtl: Prevent potential NULL dereference Bluetooth: hci_event: Fix sending MGMT_EV_DEVICE_FOUND for invalid address ==================== Link: https://patch.msgid.link/20250410173542.625232-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-11smc: Fix lockdep false-positive for IPPROTO_SMC.Kuniyuki Iwashima
SMC consists of two sockets: smc_sock and kernel TCP socket. Currently, there are two ways of creating the sockets, and syzbot reported a lockdep splat [0] for the newer way introduced by commit d25a92ccae6b ("net/smc: Introduce IPPROTO_SMC"). socket(AF_SMC , SOCK_STREAM, SMCPROTO_SMC or SMCPROTO_SMC6) socket(AF_INET or AF_INET6, SOCK_STREAM, IPPROTO_SMC) When a socket is allocated, sock_lock_init() sets a lockdep lock class to sk->sk_lock.slock based on its protocol family. In the IPPROTO_SMC case, AF_INET or AF_INET6 lock class is assigned to smc_sock. The repro sets IPV6_JOIN_ANYCAST for IPv6 UDP and SMC socket and exercises smc_switch_to_fallback() for IPPROTO_SMC. 1. smc_switch_to_fallback() is called under lock_sock() and holds smc->clcsock_release_lock. sk_lock-AF_INET6 -> &smc->clcsock_release_lock (sk_lock-AF_SMC) 2. Setting IPV6_JOIN_ANYCAST to SMC holds smc->clcsock_release_lock and calls setsockopt() for the kernel TCP socket, which holds RTNL and the kernel socket's lock_sock(). &smc->clcsock_release_lock -> rtnl_mutex (-> k-sk_lock-AF_INET6) 3. Setting IPV6_JOIN_ANYCAST to UDP holds RTNL and lock_sock(). rtnl_mutex -> sk_lock-AF_INET6 Then, lockdep detects a false-positive circular locking, .-> sk_lock-AF_INET6 -> &smc->clcsock_release_lock -> rtnl_mutex -. `-----------------------------------------------------------------' but IPPROTO_SMC should have the same locking rule as AF_SMC. sk_lock-AF_SMC -> &smc->clcsock_release_lock -> rtnl_mutex -> k-sk_lock-AF_INET6 Let's set the same lock class for smc_sock. Given AF_SMC uses the same lock class for SMCPROTO_SMC and SMCPROTO_SMC6, we do not need to separate the class for AF_INET and AF_INET6. [0]: WARNING: possible circular locking dependency detected 6.14.0-rc3-syzkaller-00267-gff202c5028a1 #0 Not tainted syz.4.1528/11571 is trying to acquire lock: ffffffff8fef8de8 (rtnl_mutex){+.+.}-{4:4}, at: ipv6_sock_ac_close+0xd9/0x110 net/ipv6/anycast.c:220 but task is already holding lock: ffff888027f596a8 (&smc->clcsock_release_lock){+.+.}-{4:4}, at: smc_clcsock_release+0x75/0xe0 net/smc/smc_close.c:30 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&smc->clcsock_release_lock){+.+.}-{4:4}: __mutex_lock_common kernel/locking/mutex.c:585 [inline] __mutex_lock+0x19b/0xb10 kernel/locking/mutex.c:730 smc_switch_to_fallback+0x2d/0xa00 net/smc/af_smc.c:903 smc_sendmsg+0x13d/0x520 net/smc/af_smc.c:2781 sock_sendmsg_nosec net/socket.c:718 [inline] __sock_sendmsg net/socket.c:733 [inline] ____sys_sendmsg+0xaaf/0xc90 net/socket.c:2573 ___sys_sendmsg+0x135/0x1e0 net/socket.c:2627 __sys_sendmsg+0x16e/0x220 net/socket.c:2659 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f -> #1 (sk_lock-AF_INET6){+.+.}-{0:0}: lock_sock_nested+0x3a/0xf0 net/core/sock.c:3645 lock_sock include/net/sock.h:1624 [inline] sockopt_lock_sock net/core/sock.c:1133 [inline] sockopt_lock_sock+0x54/0x70 net/core/sock.c:1124 do_ipv6_setsockopt+0x2160/0x4520 net/ipv6/ipv6_sockglue.c:567 ipv6_setsockopt+0xcb/0x170 net/ipv6/ipv6_sockglue.c:993 udpv6_setsockopt+0x7d/0xd0 net/ipv6/udp.c:1850 do_sock_setsockopt+0x222/0x480 net/socket.c:2303 __sys_setsockopt+0x1a0/0x230 net/socket.c:2328 __do_sys_setsockopt net/socket.c:2334 [inline] __se_sys_setsockopt net/socket.c:2331 [inline] __x64_sys_setsockopt+0xbd/0x160 net/socket.c:2331 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f -> #0 (rtnl_mutex){+.+.}-{4:4}: check_prev_add kernel/locking/lockdep.c:3163 [inline] check_prevs_add kernel/locking/lockdep.c:3282 [inline] validate_chain kernel/locking/lockdep.c:3906 [inline] __lock_acquire+0x249e/0x3c40 kernel/locking/lockdep.c:5228 lock_acquire.part.0+0x11b/0x380 kernel/locking/lockdep.c:5851 __mutex_lock_common kernel/locking/mutex.c:585 [inline] __mutex_lock+0x19b/0xb10 kernel/locking/mutex.c:730 ipv6_sock_ac_close+0xd9/0x110 net/ipv6/anycast.c:220 inet6_release+0x47/0x70 net/ipv6/af_inet6.c:485 __sock_release net/socket.c:647 [inline] sock_release+0x8e/0x1d0 net/socket.c:675 smc_clcsock_release+0xb7/0xe0 net/smc/smc_close.c:34 __smc_release+0x5c2/0x880 net/smc/af_smc.c:301 smc_release+0x1fc/0x5f0 net/smc/af_smc.c:344 __sock_release+0xb0/0x270 net/socket.c:647 sock_close+0x1c/0x30 net/socket.c:1398 __fput+0x3ff/0xb70 fs/file_table.c:464 task_work_run+0x14e/0x250 kernel/task_work.c:227 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop kernel/entry/common.c:114 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0x27b/0x2a0 kernel/entry/common.c:218 do_syscall_64+0xda/0x250 arch/x86/entry/common.c:89 entry_SYSCALL_64_after_hwframe+0x77/0x7f other info that might help us debug this: Chain exists of: rtnl_mutex --> sk_lock-AF_INET6 --> &smc->clcsock_release_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&smc->clcsock_release_lock); lock(sk_lock-AF_INET6); lock(&smc->clcsock_release_lock); lock(rtnl_mutex); *** DEADLOCK *** 2 locks held by syz.4.1528/11571: #0: ffff888077e88208 (&sb->s_type->i_mutex_key#10){+.+.}-{4:4}, at: inode_lock include/linux/fs.h:877 [inline] #0: ffff888077e88208 (&sb->s_type->i_mutex_key#10){+.+.}-{4:4}, at: __sock_release+0x86/0x270 net/socket.c:646 #1: ffff888027f596a8 (&smc->clcsock_release_lock){+.+.}-{4:4}, at: smc_clcsock_release+0x75/0xe0 net/smc/smc_close.c:30 stack backtrace: CPU: 0 UID: 0 PID: 11571 Comm: syz.4.1528 Not tainted 6.14.0-rc3-syzkaller-00267-gff202c5028a1 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_circular_bug+0x490/0x760 kernel/locking/lockdep.c:2076 check_noncircular+0x31a/0x400 kernel/locking/lockdep.c:2208 check_prev_add kernel/locking/lockdep.c:3163 [inline] check_prevs_add kernel/locking/lockdep.c:3282 [inline] validate_chain kernel/locking/lockdep.c:3906 [inline] __lock_acquire+0x249e/0x3c40 kernel/locking/lockdep.c:5228 lock_acquire.part.0+0x11b/0x380 kernel/locking/lockdep.c:5851 __mutex_lock_common kernel/locking/mutex.c:585 [inline] __mutex_lock+0x19b/0xb10 kernel/locking/mutex.c:730 ipv6_sock_ac_close+0xd9/0x110 net/ipv6/anycast.c:220 inet6_release+0x47/0x70 net/ipv6/af_inet6.c:485 __sock_release net/socket.c:647 [inline] sock_release+0x8e/0x1d0 net/socket.c:675 smc_clcsock_release+0xb7/0xe0 net/smc/smc_close.c:34 __smc_release+0x5c2/0x880 net/smc/af_smc.c:301 smc_release+0x1fc/0x5f0 net/smc/af_smc.c:344 __sock_release+0xb0/0x270 net/socket.c:647 sock_close+0x1c/0x30 net/socket.c:1398 __fput+0x3ff/0xb70 fs/file_table.c:464 task_work_run+0x14e/0x250 kernel/task_work.c:227 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop kernel/entry/common.c:114 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0x27b/0x2a0 kernel/entry/common.c:218 do_syscall_64+0xda/0x250 arch/x86/entry/common.c:89 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f8b4b38d169 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffe4efd22d8 EFLAGS: 00000246 ORIG_RAX: 00000000000001b4 RAX: 0000000000000000 RBX: 00000000000b14a3 RCX: 00007f8b4b38d169 RDX: 0000000000000000 RSI: 000000000000001e RDI: 0000000000000003 RBP: 00007f8b4b5a7ba0 R08: 0000000000000001 R09: 000000114efd25cf R10: 00007f8b4b200000 R11: 0000000000000246 R12: 00007f8b4b5a5fac R13: 00007f8b4b5a5fa0 R14: ffffffffffffffff R15: 00007ffe4efd23f0 </TASK> Fixes: d25a92ccae6b ("net/smc: Introduce IPPROTO_SMC") Reported-by: syzbot+be6f4b383534d88989f7@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=be6f4b383534d88989f7 Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Link: https://patch.msgid.link/20250407170332.26959-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-11Revert "wifi: mac80211: Update skb's control block key in ↵Johannes Berg
ieee80211_tx_dequeue()" This reverts commit a104042e2bf6528199adb6ca901efe7b60c2c27f. Since the original bug seems to have been around for years, but a new issue was report with the fix, revert the fix for now. We have a couple of weeks to figure it out for this release, if needed. Reported-by: Bert Karwatzki <spasswolf@web.de> Closes: https://lore.kernel.org/linux-wireless/20250410215527.3001-1-spasswolf@web.de Fixes: a104042e2bf6 ("wifi: mac80211: Update skb's control block key in ieee80211_tx_dequeue()") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-04-10ipv6: add exception routes to GC list in rt6_insert_exceptionXin Long
Commit 5eb902b8e719 ("net/ipv6: Remove expired routes with a separated list of routes.") introduced a separated list for managing route expiration via the GC timer. However, it missed adding exception routes (created by ip6_rt_update_pmtu() and rt6_do_redirect()) to this GC list. As a result, these exceptions were never considered for expiration and removal, leading to stale entries persisting in the routing table. This patch fixes the issue by calling fib6_add_gc_list() in rt6_insert_exception(), ensuring that exception routes are properly tracked and garbage collected when expired. Fixes: 5eb902b8e719 ("net/ipv6: Remove expired routes with a separated list of routes.") Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/837e7506ffb63f47faa2b05d9b85481aad28e1a4.1744134377.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-10Bluetooth: l2cap: Check encryption key size on incoming connectionFrédéric Danis
This is required for passing GAP/SEC/SEM/BI-04-C PTS test case: Security Mode 4 Level 4, Responder - Invalid Encryption Key Size - 128 bit This tests the security key with size from 1 to 15 bytes while the Security Mode 4 Level 4 requests 16 bytes key size. Currently PTS fails with the following logs: - expected:Connection Response: Code: [3 (0x03)] Code Identifier: (lt)WildCard: Exists(gt) Length: [8 (0x0008)] Destination CID: (lt)WildCard: Exists(gt) Source CID: [64 (0x0040)] Result: [3 (0x0003)] Connection refused - Security block Status: (lt)WildCard: Exists(gt), but received:Connection Response: Code: [3 (0x03)] Code Identifier: [1 (0x01)] Length: [8 (0x0008)] Destination CID: [64 (0x0040)] Source CID: [64 (0x0040)] Result: [0 (0x0000)] Connection Successful Status: [0 (0x0000)] No further information available And HCI logs: < HCI Command: Read Encrypti.. (0x05|0x0008) plen 2 Handle: 14 Address: 00:1B:DC:F2:24:10 (Vencer Co., Ltd.) > HCI Event: Command Complete (0x0e) plen 7 Read Encryption Key Size (0x05|0x0008) ncmd 1 Status: Success (0x00) Handle: 14 Address: 00:1B:DC:F2:24:10 (Vencer Co., Ltd.) Key size: 7 > ACL Data RX: Handle 14 flags 0x02 dlen 12 L2CAP: Connection Request (0x02) ident 1 len 4 PSM: 4097 (0x1001) Source CID: 64 < ACL Data TX: Handle 14 flags 0x00 dlen 16 L2CAP: Connection Response (0x03) ident 1 len 8 Destination CID: 64 Source CID: 64 Result: Connection successful (0x0000) Status: No further information available (0x0000) Fixes: 288c06973daa ("Bluetooth: Enforce key size of 16 bytes on FIPS level") Signed-off-by: Frédéric Danis <frederic.danis@collabora.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-04-10Bluetooth: increment TX timestamping tskey always for stream socketsPauli Virtanen
Documentation/networking/timestamping.rst implies TX timestamping OPT_ID tskey increments for each sendmsg. In practice: TCP socket increments it for all sendmsg, timestamping on or off, but UDP only when timestamping is on. The user-visible counter resets when OPT_ID is turned on, so difference can be seen only if timestamping is enabled for some packets only (eg. via SO_TIMESTAMPING CMSG). Fix BT sockets to work in the same way: stream sockets increment tskey for all sendmsg (seqpacket already increment for timestamped only). Fixes: 134f4b39df7b ("Bluetooth: add support for skb TX SND/COMPLETION timestamping") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-04-10Bluetooth: hci_event: Fix sending MGMT_EV_DEVICE_FOUND for invalid addressLuiz Augusto von Dentz
This fixes sending MGMT_EV_DEVICE_FOUND for invalid address (00:00:00:00:00:00) which is a regression introduced by a2ec905d1e16 ("Bluetooth: fix kernel oops in store_pending_adv_report") since in the attempt to skip storing data for extended advertisement it actually made the code to skip the entire if statement supposed to send MGMT_EV_DEVICE_FOUND without attempting to use the last_addr_adv which is garanteed to be invalid for extended advertisement since we never store anything on it. Link: https://github.com/bluez/bluez/issues/1157 Link: https://github.com/bluez/bluez/issues/1149#issuecomment-2767215658 Fixes: a2ec905d1e16 ("Bluetooth: fix kernel oops in store_pending_adv_report") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-04-10Merge tag 'net-6.15-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from netfilter. Current release - regressions: - core: hold instance lock during NETDEV_CHANGE - rtnetlink: fix bad unlock balance in do_setlink() - ipv6: - fix null-ptr-deref in addrconf_add_ifaddr() - align behavior across nexthops during path selection Previous releases - regressions: - sctp: prevent transport UaF in sendmsg - mptcp: only inc MPJoinAckHMacFailure for HMAC failures Previous releases - always broken: - sched: - make ->qlen_notify() idempotent - ensure sufficient space when sending filter netlink notifications - sch_sfq: really don't allow 1 packet limit - netfilter: fix incorrect avx2 match of 5th field octet - tls: explicitly disallow disconnect - eth: octeontx2-pf: fix VF root node parent queue priority" * tag 'net-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (38 commits) ethtool: cmis_cdb: Fix incorrect read / write length extension selftests: netfilter: add test case for recent mismatch bug nft_set_pipapo: fix incorrect avx2 match of 5th field octet net: ppp: Add bound checking for skb data on ppp_sync_txmung net: Fix null-ptr-deref by sock_lock_init_class_and_name() and rmmod. ipv6: Align behavior across nexthops during path selection net: phy: allow MDIO bus PM ops to start/stop state machine for phylink-controlled PHY net: phy: move phy_link_change() prior to mdio_bus_phy_may_suspend() selftests/tc-testing: sfq: check that a derived limit of 1 is rejected net_sched: sch_sfq: move the limit validation net_sched: sch_sfq: use a temporary work area for validating configuration net: libwx: handle page_pool_dev_alloc_pages error selftests: mptcp: validate MPJoin HMacFailure counters mptcp: only inc MPJoinAckHMacFailure for HMAC failures rtnetlink: Fix bad unlock balance in do_setlink(). net: ethtool: Don't call .cleanup_data when prepare_data fails tc: Ensure we have enough buffer space when sending filter netlink notifications net: libwx: Fix the wrong Rx descriptor field octeontx2-pf: qos: fix VF root node parent queue index selftests: tls: check that disconnect does nothing ...
2025-04-10ethtool: cmis_cdb: Fix incorrect read / write length extensionIdo Schimmel
The 'read_write_len_ext' field in 'struct ethtool_cmis_cdb_cmd_args' stores the maximum number of bytes that can be read from or written to the Local Payload (LPL) page in a single multi-byte access. Cited commit started overwriting this field with the maximum number of bytes that can be read from or written to the Extended Payload (LPL) pages in a single multi-byte access. Transceiver modules that support auto paging can advertise a number larger than 255 which is problematic as 'read_write_len_ext' is a 'u8', resulting in the number getting truncated and firmware flashing failing [1]. Fix by ignoring the maximum EPL access size as the kernel does not currently support auto paging (even if the transceiver module does) and will not try to read / write more than 128 bytes at once. [1] Transceiver module firmware flashing started for device enp177s0np0 Transceiver module firmware flashing in progress for device enp177s0np0 Progress: 0% Transceiver module firmware flashing encountered an error for device enp177s0np0 Status message: Write FW block EPL command failed, LPL length is longer than CDB read write length extension allows. Fixes: 9a3b0d078bd8 ("net: ethtool: Add support for writing firmware blocks using EPL payload") Reported-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com> Closes: https://lore.kernel.org/netdev/20250402183123.321036-3-michael.chan@broadcom.com/ Tested-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Link: https://patch.msgid.link/20250409112440.365672-1-idosch@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-10nft_set_pipapo: fix incorrect avx2 match of 5th field octetFlorian Westphal
Given a set element like: icmpv6 . dead:beef:00ff::1 The value of 'ff' is irrelevant, any address will be matched as long as the other octets are the same. This is because of too-early register clobbering: ymm7 is reloaded with new packet data (pkt[9]) but it still holds data of an earlier load that wasn't processed yet. The existing tests in nft_concat_range.sh selftests do exercise this code path, but do not trigger incorrect matching due to the network prefix limitation. Fixes: 7400b063969b ("nft_set_pipapo: Introduce AVX2-based lookup implementation") Reported-by: sontu mazumdar <sontu21@gmail.com> Closes: https://lore.kernel.org/netfilter/CANgxkqwnMH7fXra+VUfODT-8+qFLgskq3set1cAzqqJaV4iEZg@mail.gmail.com/T/#t Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2025-04-09bpf: support SKF_NET_OFF and SKF_LL_OFF on skb fragsWillem de Bruijn
Classic BPF socket filters with SKB_NET_OFF and SKB_LL_OFF fail to read when these offsets extend into frags. This has been observed with iwlwifi and reproduced with tun with IFF_NAPI_FRAGS. The below straightforward socket filter on UDP port, applied to a RAW socket, will silently miss matching packets. const int offset_proto = offsetof(struct ip6_hdr, ip6_nxt); const int offset_dport = sizeof(struct ip6_hdr) + offsetof(struct udphdr, dest); struct sock_filter filter_code[] = { BPF_STMT(BPF_LD + BPF_B + BPF_ABS, SKF_AD_OFF + SKF_AD_PKTTYPE), BPF_JUMP(BPF_JMP + BPF_JEQ + BPF_K, PACKET_HOST, 0, 4), BPF_STMT(BPF_LD + BPF_B + BPF_ABS, SKF_NET_OFF + offset_proto), BPF_JUMP(BPF_JMP + BPF_JEQ + BPF_K, IPPROTO_UDP, 0, 2), BPF_STMT(BPF_LD + BPF_H + BPF_ABS, SKF_NET_OFF + offset_dport), This is unexpected behavior. Socket filter programs should be consistent regardless of environment. Silent misses are particularly concerning as hard to detect. Use skb_copy_bits for offsets outside linear, same as done for non-SKF_(LL|NET) offsets. Offset is always positive after subtracting the reference threshold SKB_(LL|NET)_OFF, so is always >= skb_(mac|network)_offset. The sum of the two is an offset against skb->data, and may be negative, but it cannot point before skb->head, as skb_(mac|network)_offset would too. This appears to go back to when frag support was introduced to sk_run_filter in linux-2.4.4, before the introduction of git. The amount of code change and 8/16/32 bit duplication are unfortunate. But any attempt I made to be smarter saved very few LoC while complicating the code. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Link: https://lore.kernel.org/netdev/20250122200402.3461154-1-maze@google.com/ Link: https://elixir.bootlin.com/linux/2.4.4/source/net/core/filter.c#L244 Reported-by: Matt Moeller <moeller.matt@gmail.com> Co-developed-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://lore.kernel.org/r/20250408132833.195491-2-willemdebruijn.kernel@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2025-04-09net: Fix null-ptr-deref by sock_lock_init_class_and_name() and rmmod.Kuniyuki Iwashima
When I ran the repro [0] and waited a few seconds, I observed two LOCKDEP splats: a warning immediately followed by a null-ptr-deref. [1] Reproduction Steps: 1) Mount CIFS 2) Add an iptables rule to drop incoming FIN packets for CIFS 3) Unmount CIFS 4) Unload the CIFS module 5) Remove the iptables rule At step 3), the CIFS module calls sock_release() for the underlying TCP socket, and it returns quickly. However, the socket remains in FIN_WAIT_1 because incoming FIN packets are dropped. At this point, the module's refcnt is 0 while the socket is still alive, so the following rmmod command succeeds. # ss -tan State Recv-Q Send-Q Local Address:Port Peer Address:Port FIN-WAIT-1 0 477 10.0.2.15:51062 10.0.0.137:445 # lsmod | grep cifs cifs 1159168 0 This highlights a discrepancy between the lifetime of the CIFS module and the underlying TCP socket. Even after CIFS calls sock_release() and it returns, the TCP socket does not die immediately in order to close the connection gracefully. While this is generally fine, it causes an issue with LOCKDEP because CIFS assigns a different lock class to the TCP socket's sk->sk_lock using sock_lock_init_class_and_name(). Once an incoming packet is processed for the socket or a timer fires, sk->sk_lock is acquired. Then, LOCKDEP checks the lock context in check_wait_context(), where hlock_class() is called to retrieve the lock class. However, since the module has already been unloaded, hlock_class() logs a warning and returns NULL, triggering the null-ptr-deref. If LOCKDEP is enabled, we must ensure that a module calling sock_lock_init_class_and_name() (CIFS, NFS, etc) cannot be unloaded while such a socket is still alive to prevent this issue. Let's hold the module reference in sock_lock_init_class_and_name() and release it when the socket is freed in sk_prot_free(). Note that sock_lock_init() clears sk->sk_owner for svc_create_socket() that calls sock_lock_init_class_and_name() for a listening socket, which clones a socket by sk_clone_lock() without GFP_ZERO. [0]: CIFS_SERVER="10.0.0.137" CIFS_PATH="//${CIFS_SERVER}/Users/Administrator/Desktop/CIFS_TEST" DEV="enp0s3" CRED="/root/WindowsCredential.txt" MNT=$(mktemp -d /tmp/XXXXXX) mount -t cifs ${CIFS_PATH} ${MNT} -o vers=3.0,credentials=${CRED},cache=none,echo_interval=1 iptables -A INPUT -s ${CIFS_SERVER} -j DROP for i in $(seq 10); do umount ${MNT} rmmod cifs sleep 1 done rm -r ${MNT} iptables -D INPUT -s ${CIFS_SERVER} -j DROP [1]: DEBUG_LOCKS_WARN_ON(1) WARNING: CPU: 10 PID: 0 at kernel/locking/lockdep.c:234 hlock_class (kernel/locking/lockdep.c:234 kernel/locking/lockdep.c:223) Modules linked in: cifs_arc4 nls_ucs2_utils cifs_md4 [last unloaded: cifs] CPU: 10 UID: 0 PID: 0 Comm: swapper/10 Not tainted 6.14.0 #36 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:hlock_class (kernel/locking/lockdep.c:234 kernel/locking/lockdep.c:223) ... Call Trace: <IRQ> __lock_acquire (kernel/locking/lockdep.c:4853 kernel/locking/lockdep.c:5178) lock_acquire (kernel/locking/lockdep.c:469 kernel/locking/lockdep.c:5853 kernel/locking/lockdep.c:5816) _raw_spin_lock_nested (kernel/locking/spinlock.c:379) tcp_v4_rcv (./include/linux/skbuff.h:1678 ./include/net/tcp.h:2547 net/ipv4/tcp_ipv4.c:2350) ... BUG: kernel NULL pointer dereference, address: 00000000000000c4 PF: supervisor read access in kernel mode PF: error_code(0x0000) - not-present page PGD 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 10 UID: 0 PID: 0 Comm: swapper/10 Tainted: G W 6.14.0 #36 Tainted: [W]=WARN Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:__lock_acquire (kernel/locking/lockdep.c:4852 kernel/locking/lockdep.c:5178) Code: 15 41 09 c7 41 8b 44 24 20 25 ff 1f 00 00 41 09 c7 8b 84 24 a0 00 00 00 45 89 7c 24 20 41 89 44 24 24 e8 e1 bc ff ff 4c 89 e7 <44> 0f b6 b8 c4 00 00 00 e8 d1 bc ff ff 0f b6 80 c5 00 00 00 88 44 RSP: 0018:ffa0000000468a10 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ff1100010091cc38 RCX: 0000000000000027 RDX: ff1100081f09ca48 RSI: 0000000000000001 RDI: ff1100010091cc88 RBP: ff1100010091c200 R08: ff1100083fe6e228 R09: 00000000ffffbfff R10: ff1100081eca0000 R11: ff1100083fe10dc0 R12: ff1100010091cc88 R13: 0000000000000001 R14: 0000000000000000 R15: 00000000000424b1 FS: 0000000000000000(0000) GS:ff1100081f080000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000c4 CR3: 0000000002c4a003 CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> lock_acquire (kernel/locking/lockdep.c:469 kernel/locking/lockdep.c:5853 kernel/locking/lockdep.c:5816) _raw_spin_lock_nested (kernel/locking/spinlock.c:379) tcp_v4_rcv (./include/linux/skbuff.h:1678 ./include/net/tcp.h:2547 net/ipv4/tcp_ipv4.c:2350) ip_protocol_deliver_rcu (net/ipv4/ip_input.c:205 (discriminator 1)) ip_local_deliver_finish (./include/linux/rcupdate.h:878 net/ipv4/ip_input.c:234) ip_sublist_rcv_finish (net/ipv4/ip_input.c:576) ip_list_rcv_finish (net/ipv4/ip_input.c:628) ip_list_rcv (net/ipv4/ip_input.c:670) __netif_receive_skb_list_core (net/core/dev.c:5939 net/core/dev.c:5986) netif_receive_skb_list_internal (net/core/dev.c:6040 net/core/dev.c:6129) napi_complete_done (./include/linux/list.h:37 ./include/net/gro.h:519 ./include/net/gro.h:514 net/core/dev.c:6496) e1000_clean (drivers/net/ethernet/intel/e1000/e1000_main.c:3815) __napi_poll.constprop.0 (net/core/dev.c:7191) net_rx_action (net/core/dev.c:7262 net/core/dev.c:7382) handle_softirqs (kernel/softirq.c:561) __irq_exit_rcu (kernel/softirq.c:596 kernel/softirq.c:435 kernel/softirq.c:662) irq_exit_rcu (kernel/softirq.c:680) common_interrupt (arch/x86/kernel/irq.c:280 (discriminator 14)) </IRQ> <TASK> asm_common_interrupt (./arch/x86/include/asm/idtentry.h:693) RIP: 0010:default_idle (./arch/x86/include/asm/irqflags.h:37 ./arch/x86/include/asm/irqflags.h:92 arch/x86/kernel/process.c:744) Code: 4c 01 c7 4c 29 c2 e9 72 ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa eb 07 0f 00 2d c3 2b 15 00 fb f4 <fa> c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 RSP: 0018:ffa00000000ffee8 EFLAGS: 00000202 RAX: 000000000000640b RBX: ff1100010091c200 RCX: 0000000000061aa4 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff812f30c5 RBP: 000000000000000a R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000002 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 ? do_idle (kernel/sched/idle.c:186 kernel/sched/idle.c:325) default_idle_call (./include/linux/cpuidle.h:143 kernel/sched/idle.c:118) do_idle (kernel/sched/idle.c:186 kernel/sched/idle.c:325) cpu_startup_entry (kernel/sched/idle.c:422 (discriminator 1)) start_secondary (arch/x86/kernel/smpboot.c:315) common_startup_64 (arch/x86/kernel/head_64.S:421) </TASK> Modules linked in: cifs_arc4 nls_ucs2_utils cifs_md4 [last unloaded: cifs] CR2: 00000000000000c4 Fixes: ed07536ed673 ("[PATCH] lockdep: annotate nfs/nfsd in-kernel sockets") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20250407163313.22682-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-09ipv6: Align behavior across nexthops during path selectionIdo Schimmel
A nexthop is only chosen when the calculated multipath hash falls in the nexthop's hash region (i.e., the hash is smaller than the nexthop's hash threshold) and when the nexthop is assigned a non-negative score by rt6_score_route(). Commit 4d0ab3a6885e ("ipv6: Start path selection from the first nexthop") introduced an unintentional difference between the first nexthop and the rest when the score is negative. When the first nexthop matches, but has a negative score, the code will currently evaluate subsequent nexthops until one is found with a non-negative score. On the other hand, when a different nexthop matches, but has a negative score, the code will fallback to the nexthop with which the selection started ('match'). Align the behavior across all nexthops and fallback to 'match' when the first nexthop matches, but has a negative score. Fixes: 3d709f69a3e7 ("ipv6: Use hash-threshold instead of modulo-N") Fixes: 4d0ab3a6885e ("ipv6: Start path selection from the first nexthop") Reported-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Closes: https://lore.kernel.org/netdev/67efef607bc41_1ddca82948c@willemb.c.googlers.com.notmuch/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20250408084316.243559-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-09net_sched: sch_sfq: move the limit validationOctavian Purdila
It is not sufficient to directly validate the limit on the data that the user passes as it can be updated based on how the other parameters are changed. Move the check at the end of the configuration update process to also catch scenarios where the limit is indirectly updated, for example with the following configurations: tc qdisc add dev dummy0 handle 1: root sfq limit 2 flows 1 depth 1 tc qdisc add dev dummy0 handle 1: root sfq limit 2 flows 1 divisor 1 This fixes the following syzkaller reported crash: ------------[ cut here ]------------ UBSAN: array-index-out-of-bounds in net/sched/sch_sfq.c:203:6 index 65535 is out of range for type 'struct sfq_head[128]' CPU: 1 UID: 0 PID: 3037 Comm: syz.2.16 Not tainted 6.14.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 12/27/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x201/0x300 lib/dump_stack.c:120 ubsan_epilogue lib/ubsan.c:231 [inline] __ubsan_handle_out_of_bounds+0xf5/0x120 lib/ubsan.c:429 sfq_link net/sched/sch_sfq.c:203 [inline] sfq_dec+0x53c/0x610 net/sched/sch_sfq.c:231 sfq_dequeue+0x34e/0x8c0 net/sched/sch_sfq.c:493 sfq_reset+0x17/0x60 net/sched/sch_sfq.c:518 qdisc_reset+0x12e/0x600 net/sched/sch_generic.c:1035 tbf_reset+0x41/0x110 net/sched/sch_tbf.c:339 qdisc_reset+0x12e/0x600 net/sched/sch_generic.c:1035 dev_reset_queue+0x100/0x1b0 net/sched/sch_generic.c:1311 netdev_for_each_tx_queue include/linux/netdevice.h:2590 [inline] dev_deactivate_many+0x7e5/0xe70 net/sched/sch_generic.c:1375 Reported-by: syzbot <syzkaller@googlegroups.com> Fixes: 10685681bafc ("net_sched: sch_sfq: don't allow 1 packet limit") Signed-off-by: Octavian Purdila <tavip@google.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-04-09net_sched: sch_sfq: use a temporary work area for validating configurationOctavian Purdila
Many configuration parameters have influence on others (e.g. divisor -> flows -> limit, depth -> limit) and so it is difficult to correctly do all of the validation before applying the configuration. And if a validation error is detected late it is difficult to roll back a partially applied configuration. To avoid these issues use a temporary work area to update and validate the configuration and only then apply the configuration to the internal state. Signed-off-by: Octavian Purdila <tavip@google.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-04-08mptcp: only inc MPJoinAckHMacFailure for HMAC failuresMatthieu Baerts (NGI0)
Recently, during a debugging session using local MPTCP connections, I noticed MPJoinAckHMacFailure was not zero on the server side. The counter was in fact incremented when the PM rejected new subflows, because the 'subflow' limit was reached. The fix is easy, simply dissociating the two cases: only the HMAC validation check should increase MPTCP_MIB_JOINACKMAC counter. Fixes: 4cf8b7e48a09 ("subflow: introduce and use mptcp_can_accept_new_subflow()") Cc: stable@vger.kernel.org Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250407-net-mptcp-hmac-failure-mib-v1-1-3c9ecd0a3a50@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-08rtnetlink: Fix bad unlock balance in do_setlink().Kuniyuki Iwashima
When validate_linkmsg() fails in do_setlink(), we jump to the errout label and calls netdev_unlock_ops() even though we have not called netdev_lock_ops() as reported by syzbot. [0] Let's return an error directly in such a case. [0] WARNING: bad unlock balance detected! 6.14.0-syzkaller-12504-g8bc251e5d874 #0 Not tainted syz-executor814/5834 is trying to release lock (&dev_instance_lock_key) at: [<ffffffff89f41f56>] netdev_unlock include/linux/netdevice.h:2756 [inline] [<ffffffff89f41f56>] netdev_unlock_ops include/net/netdev_lock.h:48 [inline] [<ffffffff89f41f56>] do_setlink+0xc26/0x43a0 net/core/rtnetlink.c:3406 but there are no more locks to release! other info that might help us debug this: 1 lock held by syz-executor814/5834: #0: ffffffff900fc408 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_lock net/core/rtnetlink.c:80 [inline] #0: ffffffff900fc408 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_nets_lock net/core/rtnetlink.c:341 [inline] #0: ffffffff900fc408 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_newlink+0xd68/0x1fe0 net/core/rtnetlink.c:4064 stack backtrace: CPU: 0 UID: 0 PID: 5834 Comm: syz-executor814 Not tainted 6.14.0-syzkaller-12504-g8bc251e5d874 #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_unlock_imbalance_bug+0x185/0x1a0 kernel/locking/lockdep.c:5296 __lock_release kernel/locking/lockdep.c:5535 [inline] lock_release+0x1ed/0x3e0 kernel/locking/lockdep.c:5887 __mutex_unlock_slowpath+0xee/0x800 kernel/locking/mutex.c:907 netdev_unlock include/linux/netdevice.h:2756 [inline] netdev_unlock_ops include/net/netdev_lock.h:48 [inline] do_setlink+0xc26/0x43a0 net/core/rtnetlink.c:3406 rtnl_group_changelink net/core/rtnetlink.c:3783 [inline] __rtnl_newlink net/core/rtnetlink.c:3937 [inline] rtnl_newlink+0x1619/0x1fe0 net/core/rtnetlink.c:4065 rtnetlink_rcv_msg+0x80f/0xd70 net/core/rtnetlink.c:6955 netlink_rcv_skb+0x208/0x480 net/netlink/af_netlink.c:2534 netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline] netlink_unicast+0x7f8/0x9a0 net/netlink/af_netlink.c:1339 netlink_sendmsg+0x8c3/0xcd0 net/netlink/af_netlink.c:1883 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:727 ____sys_sendmsg+0x523/0x860 net/socket.c:2566 ___sys_sendmsg net/socket.c:2620 [inline] __sys_sendmsg+0x271/0x360 net/socket.c:2652 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f8427b614a9 Code: 48 83 c4 28 c3 e8 37 17 00 00 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fff9b59f3a8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007fff9b59f578 RCX: 00007f8427b614a9 RDX: 0000000000000000 RSI: 0000200000000300 RDI: 0000000000000004 RBP: 00007f8427bd4610 R08: 000000000000000c R09: 00007fff9b59f578 R10: 000000000000001b R11: 0000000000000246 R12: 0000000000000001 R13: Fixes: 4c975fd70002 ("net: hold instance lock during NETDEV_REGISTER/UP") Reported-by: syzbot+45016fe295243a7882d3@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=45016fe295243a7882d3 Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250407164229.24414-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-08Merge tag 'crc-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux Pull CRC cleanups from Eric Biggers: "Finish cleaning up the CRC kconfig options by removing the remaining unnecessary prompts and an unnecessary 'default y', removing CONFIG_LIBCRC32C, and documenting all the CRC library options" * tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: lib/crc: remove CONFIG_LIBCRC32C lib/crc: document all the CRC library kconfig options lib/crc: remove unnecessary prompt for CONFIG_CRC_ITU_T lib/crc: remove unnecessary prompt for CONFIG_CRC_T10DIF lib/crc: remove unnecessary prompt for CONFIG_CRC16 lib/crc: remove unnecessary prompt for CONFIG_CRC_CCITT lib/crc: remove unnecessary prompt for CONFIG_CRC32 and drop 'default y'
2025-04-08net: ethtool: Don't call .cleanup_data when prepare_data failsMaxime Chevallier
There's a consistent pattern where the .cleanup_data() callback is called when .prepare_data() fails, when it should really be called to clean after a successful .prepare_data() as per the documentation. Rewrite the error-handling paths to make sure we don't cleanup un-prepared data. Fixes: c781ff12a2f3 ("ethtool: Allow network drivers to dump arbitrary EEPROM data") Reviewed-by: Kory Maincent <kory.maincent@bootlin.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20250407130511.75621-1-maxime.chevallier@bootlin.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-08tc: Ensure we have enough buffer space when sending filter netlink notificationsToke Høiland-Jørgensen
The tfilter_notify() and tfilter_del_notify() functions assume that NLMSG_GOODSIZE is always enough to dump the filter chain. This is not always the case, which can lead to silent notify failures (because the return code of tfilter_notify() is not always checked). In particular, this can lead to NLM_F_ECHO not being honoured even though an action succeeds, which forces userspace to create workarounds[0]. Fix this by increasing the message size if dumping the filter chain into the allocated skb fails. Use the size of the incoming skb as a size hint if set, so we can start at a larger value when appropriate. To trigger this, run the following commands: # ip link add type veth # tc qdisc replace dev veth0 root handle 1: fq_codel # tc -echo filter add dev veth0 parent 1: u32 match u32 0 0 $(for i in $(seq 32); do echo action pedit munge ip dport set 22; done) Before this fix, tc just returns: Not a filter(cmd 2) After the fix, we get the correct echo: added filter dev veth0 parent 1: protocol all pref 49152 u32 chain 0 fh 800::800 order 2048 key ht 800 bkt 0 terminal flowid not_in_hw match 00000000/00000000 at 0 action order 1: pedit action pass keys 1 index 1 ref 1 bind 1 key #0 at 20: val 00000016 mask ffff0000 [repeated 32 times] [0] https://github.com/openvswitch/ovs/commit/106ef21860c935e5e0017a88bf42b94025c4e511 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Frode Nordahl <frode.nordahl@canonical.com> Closes: https://bugs.launchpad.net/ubuntu/+source/openvswitch/+bug/2018500 Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://patch.msgid.link/20250407105542.16601-1-toke@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-08net: tls: explicitly disallow disconnectJakub Kicinski
syzbot discovered that it can disconnect a TLS socket and then run into all sort of unexpected corner cases. I have a vague recollection of Eric pointing this out to us a long time ago. Supporting disconnect is really hard, for one thing if offload is enabled we'd need to wait for all packets to be _acked_. Disconnect is not commonly used, disallow it. The immediate problem syzbot run into is the warning in the strp, but that's just the easiest bug to trigger: WARNING: CPU: 0 PID: 5834 at net/tls/tls_strp.c:486 tls_strp_msg_load+0x72e/0xa80 net/tls/tls_strp.c:486 RIP: 0010:tls_strp_msg_load+0x72e/0xa80 net/tls/tls_strp.c:486 Call Trace: <TASK> tls_rx_rec_wait+0x280/0xa60 net/tls/tls_sw.c:1363 tls_sw_recvmsg+0x85c/0x1c30 net/tls/tls_sw.c:2043 inet6_recvmsg+0x2c9/0x730 net/ipv6/af_inet6.c:678 sock_recvmsg_nosec net/socket.c:1023 [inline] sock_recvmsg+0x109/0x280 net/socket.c:1045 __sys_recvfrom+0x202/0x380 net/socket.c:2237 Fixes: 3c4d7559159b ("tls: kernel TLS support") Reported-by: syzbot+b4cd76826045a1eb93c1@syzkaller.appspotmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Link: https://patch.msgid.link/20250404180334.3224206-1-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-08sctp: detect and prevent references to a freed transport in sendmsgRicardo Cañuelo Navarro
sctp_sendmsg() re-uses associations and transports when possible by doing a lookup based on the socket endpoint and the message destination address, and then sctp_sendmsg_to_asoc() sets the selected transport in all the message chunks to be sent. There's a possible race condition if another thread triggers the removal of that selected transport, for instance, by explicitly unbinding an address with setsockopt(SCTP_SOCKOPT_BINDX_REM), after the chunks have been set up and before the message is sent. This can happen if the send buffer is full, during the period when the sender thread temporarily releases the socket lock in sctp_wait_for_sndbuf(). This causes the access to the transport data in sctp_outq_select_transport(), when the association outqueue is flushed, to result in a use-after-free read. This change avoids this scenario by having sctp_transport_free() signal the freeing of the transport, tagging it as "dead". In order to do this, the patch restores the "dead" bit in struct sctp_transport, which was removed in commit 47faa1e4c50e ("sctp: remove the dead field of sctp_transport"). Then, in the scenario where the sender thread has released the socket lock in sctp_wait_for_sndbuf(), the bit is checked again after re-acquiring the socket lock to detect the deletion. This is done while holding a reference to the transport to prevent it from being freed in the process. If the transport was deleted while the socket lock was relinquished, sctp_sendmsg_to_asoc() will return -EAGAIN to let userspace retry the send. The bug was found by a private syzbot instance (see the error report [1] and the C reproducer that triggers it [2]). Link: https://people.igalia.com/rcn/kernel_logs/20250402__KASAN_slab-use-after-free_Read_in_sctp_outq_select_transport.txt [1] Link: https://people.igalia.com/rcn/kernel_logs/20250402__KASAN_slab-use-after-free_Read_in_sctp_outq_select_transport__repro.c [2] Cc: stable@vger.kernel.org Fixes: df132eff4638 ("sctp: clear the transport of some out_chunk_list chunks in sctp_assoc_rm_peer") Suggested-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Ricardo Cañuelo Navarro <rcn@igalia.com> Acked-by: Xin Long <lucien.xin@gmail.com> Link: https://patch.msgid.link/20250404-kasan_slab-use-after-free_read_in_sctp_outq_select_transport__20250404-v1-1-5ce4a0b78ef2@igalia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-08codel: remove sch->q.qlen check before qdisc_tree_reduce_backlog()Cong Wang
After making all ->qlen_notify() callbacks idempotent, now it is safe to remove the check of qlen!=0 from both fq_codel_dequeue() and codel_qdisc_dequeue(). Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg> Fixes: 4b549a2ef4be ("fq_codel: Fair Queue Codel AQM") Fixes: 76e3cc126bb2 ("codel: Controlled Delay AQM") Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250403211636.166257-1-xiyou.wangcong@gmail.com Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-08sch_ets: make est_qlen_notify() idempotentCong Wang
est_qlen_notify() deletes its class from its active list with list_del() when qlen is 0, therefore, it is not idempotent and not friendly to its callers, like fq_codel_dequeue(). Let's make it idempotent to ease qdisc_tree_reduce_backlog() callers' life. Also change other list_del()'s to list_del_init() just to be extra safe. Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Link: https://patch.msgid.link/20250403211033.166059-6-xiyou.wangcong@gmail.com Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-08sch_qfq: make qfq_qlen_notify() idempotentCong Wang
qfq_qlen_notify() always deletes its class from its active list with list_del_init() _and_ calls qfq_deactivate_agg() when the whole list becomes empty. To make it idempotent, just skip everything when it is not in the active list. Also change other list_del()'s to list_del_init() just to be extra safe. Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250403211033.166059-5-xiyou.wangcong@gmail.com Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-08sch_hfsc: make hfsc_qlen_notify() idempotentCong Wang
hfsc_qlen_notify() is not idempotent either and not friendly to its callers, like fq_codel_dequeue(). Let's make it idempotent to ease qdisc_tree_reduce_backlog() callers' life: 1. update_vf() decreases cl->cl_nactive, so we can check whether it is non-zero before calling it. 2. eltree_remove() always removes RB node cl->el_node, but we can use RB_EMPTY_NODE() + RB_CLEAR_NODE() to make it safe. Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250403211033.166059-4-xiyou.wangcong@gmail.com Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-08sch_drr: make drr_qlen_notify() idempotentCong Wang
drr_qlen_notify() always deletes the DRR class from its active list with list_del(), therefore, it is not idempotent and not friendly to its callers, like fq_codel_dequeue(). Let's make it idempotent to ease qdisc_tree_reduce_backlog() callers' life. Also change other list_del()'s to list_del_init() just to be extra safe. Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250403211033.166059-3-xiyou.wangcong@gmail.com Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-08sch_htb: make htb_qlen_notify() idempotentCong Wang
htb_qlen_notify() always deactivates the HTB class and in fact could trigger a warning if it is already deactivated. Therefore, it is not idempotent and not friendly to its callers, like fq_codel_dequeue(). Let's make it idempotent to ease qdisc_tree_reduce_backlog() callers' life. Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250403211033.166059-2-xiyou.wangcong@gmail.com Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-08tipc: fix memory leak in tipc_link_xmitTung Nguyen
In case the backlog transmit queue for system-importance messages is overloaded, tipc_link_xmit() returns -ENOBUFS but the skb list is not purged. This leads to memory leak and failure when a skb is allocated. This commit fixes this issue by purging the skb list before tipc_link_xmit() returns. Fixes: 365ad353c256 ("tipc: reduce risk of user starvation during link congestion") Signed-off-by: Tung Nguyen <tung.quang.nguyen@est.tech> Link: https://patch.msgid.link/20250403092431.514063-1-tung.quang.nguyen@est.tech Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-07net: hold instance lock during NETDEV_CHANGEStanislav Fomichev
Cosmin reports an issue with ipv6_add_dev being called from NETDEV_CHANGE notifier: [ 3455.008776] ? ipv6_add_dev+0x370/0x620 [ 3455.010097] ipv6_find_idev+0x96/0xe0 [ 3455.010725] addrconf_add_dev+0x1e/0xa0 [ 3455.011382] addrconf_init_auto_addrs+0xb0/0x720 [ 3455.013537] addrconf_notify+0x35f/0x8d0 [ 3455.014214] notifier_call_chain+0x38/0xf0 [ 3455.014903] netdev_state_change+0x65/0x90 [ 3455.015586] linkwatch_do_dev+0x5a/0x70 [ 3455.016238] rtnl_getlink+0x241/0x3e0 [ 3455.019046] rtnetlink_rcv_msg+0x177/0x5e0 Similarly, linkwatch might get to ipv6_add_dev without ops lock: [ 3456.656261] ? ipv6_add_dev+0x370/0x620 [ 3456.660039] ipv6_find_idev+0x96/0xe0 [ 3456.660445] addrconf_add_dev+0x1e/0xa0 [ 3456.660861] addrconf_init_auto_addrs+0xb0/0x720 [ 3456.661803] addrconf_notify+0x35f/0x8d0 [ 3456.662236] notifier_call_chain+0x38/0xf0 [ 3456.662676] netdev_state_change+0x65/0x90 [ 3456.663112] linkwatch_do_dev+0x5a/0x70 [ 3456.663529] __linkwatch_run_queue+0xeb/0x200 [ 3456.663990] linkwatch_event+0x21/0x30 [ 3456.664399] process_one_work+0x211/0x610 [ 3456.664828] worker_thread+0x1cc/0x380 [ 3456.665691] kthread+0xf4/0x210 Reclassify NETDEV_CHANGE as a notifier that consistently runs under the instance lock. Link: https://lore.kernel.org/netdev/aac073de8beec3e531c86c101b274d434741c28e.camel@nvidia.com/ Reported-by: Cosmin Ratiu <cratiu@nvidia.com> Tested-by: Cosmin Ratiu <cratiu@nvidia.com> Fixes: ad7c7b2172c3 ("net: hold netdev instance lock during sysfs operations") Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250404161122.3907628-1-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-07ipv6: Fix null-ptr-deref in addrconf_add_ifaddr().Kuniyuki Iwashima
The cited commit placed netdev_lock_ops() just after __dev_get_by_index() in addrconf_add_ifaddr(), where dev could be NULL as reported. [0] Let's call netdev_lock_ops() only when dev is not NULL. [0]: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000198: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000cc0-0x0000000000000cc7] CPU: 3 UID: 0 PID: 12032 Comm: syz.0.15 Not tainted 6.14.0-13408-g9f867ba24d36 #1 PREEMPT(full) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:addrconf_add_ifaddr (./include/net/netdev_lock.h:30 ./include/net/netdev_lock.h:41 net/ipv6/addrconf.c:3157) Code: 8b b4 24 94 00 00 00 4c 89 ef e8 7e 4c 2f ff 4c 8d b0 c5 0c 00 00 48 89 c3 48 b8 00 00 00 00 00 fc ff df 4c 89 f2 48 c1 ea 03 <0f> b6 04 02 4c 89 f2 83 e2 07 38 d0 7f 08 80 RSP: 0018:ffffc90015b0faa0 EFLAGS: 00010213 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000198 RSI: ffffffff893162f2 RDI: ffff888078cb0338 RBP: ffffc90015b0fbb0 R08: 0000000000000000 R09: fffffbfff20cbbe2 R10: ffffc90015b0faa0 R11: 0000000000000000 R12: 1ffff92002b61f54 R13: ffff888078cb0000 R14: 0000000000000cc5 R15: ffff888078cb0000 FS: 00007f92559ed640(0000) GS:ffff8882a8659000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f92559ecfc8 CR3: 000000001c39e000 CR4: 00000000000006f0 Call Trace: <TASK> inet6_ioctl (net/ipv6/af_inet6.c:580) sock_do_ioctl (net/socket.c:1196) sock_ioctl (net/socket.c:1314) __x64_sys_ioctl (fs/ioctl.c:52 fs/ioctl.c:906 fs/ioctl.c:892 fs/ioctl.c:892) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130 RIP: 0033:0x7f9254b9c62d Code: 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff f8 RSP: 002b:00007f92559ecf98 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f9254d65f80 RCX: 00007f9254b9c62d RDX: 0000000020000040 RSI: 0000000000008916 RDI: 0000000000000003 RBP: 00007f9254c264d3 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f9254d65f80 R15: 00007f92559cd000 </TASK> Modules linked in: Fixes: 8965c160b8f7 ("net: use netif_disable_lro in ipv6_add_dev") Reported-by: syzkaller <syzkaller@googlegroups.com> Reported-by: Hui Guo <guohui.study@gmail.com> Closes: https://lore.kernel.org/netdev/CAHOo4gK+tdU1B14Kh6tg-tNPqnQ1qGLfinONFVC43vmgEPnXXw@mail.gmail.com/ Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250406035755.69238-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-07net: ethtool: fix ethtool_ringparam_get_cfg() returns a hds_thresh value ↵Taehee Yoo
always as 0. When hds-thresh is configured, ethnl_set_rings() is called, and it calls ethtool_ringparam_get_cfg() to get ringparameters from .get_ringparam() callback and dev->cfg. Both hds_config and hds_thresh values should be set from dev->cfg, not from .get_ringparam(). But ethtool_ringparam_get_cfg() sets only hds_config from dev->cfg. So, ethtool_ringparam_get_cfg() returns always a hds_thresh as 0. If an input value of hds-thresh is 0, a hds_thresh value from ethtool_ringparam_get_cfg() are same. So ethnl_set_rings() does nothing and returns immediately. It causes a bug that setting a hds-thresh value to 0 is not working. Reproducer: modprobe netdevsim echo 1 > /sys/bus/netdevsim/new_device ethtool -G eth0 hds-thresh 100 ethtool -G eth0 hds-thresh 0 ethtool -g eth0 #hds-thresh value should be 0, but it shows 100. The tools/testing/selftests/drivers/net/hds.py can test it too with applying a following patch for hds.py. Fixes: 928459bbda19 ("net: ethtool: populate the default HDS params in the core") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://patch.msgid.link/20250404122126.1555648-2-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-05treewide: Switch/rename to timer_delete[_sync]()Thomas Gleixner
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree over and remove the historical wrapper inlines. Conversion was done with coccinelle plus manual fixups where necessary. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2025-04-04lib/crc: remove CONFIG_LIBCRC32CEric Biggers
Now that LIBCRC32C does nothing besides select CRC32, make every option that selects LIBCRC32C instead select CRC32 directly. Then remove LIBCRC32C. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20250401221600.24878-8-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2025-04-04Merge tag 'net-6.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter. Current release - regressions: - four fixes for the netdev per-instance locking Current release - new code bugs: - consolidate more code between existing Rx zero-copy and uring so that the latter doesn't miss / have to duplicate the safety checks Previous releases - regressions: - ipv6: fix omitted Netlink attributes when using SKIP_STATS Previous releases - always broken: - net: fix geneve_opt length integer overflow - udp: fix multiple wrap arounds of sk->sk_rmem_alloc when it approaches INT_MAX - dsa: mvpp2: add a lock to avoid corruption of the shared TCAM - dsa: airoha: fix issues with traffic QoS configuration / offload, and flow table offload Misc: - touch up the Netlink YAML specs of old families to make them usable for user space C codegen" * tag 'net-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (56 commits) selftests: net: amt: indicate progress in the stress test netlink: specs: rt_route: pull the ifa- prefix out of the names netlink: specs: rt_addr: pull the ifa- prefix out of the names netlink: specs: rt_addr: fix get multi command name netlink: specs: rt_addr: fix the spec format / schema failures net: avoid false positive warnings in __net_mp_close_rxq() net: move mp dev config validation to __net_mp_open_rxq() net: ibmveth: make veth_pool_store stop hanging arcnet: Add NULL check in com20020pci_probe() ipv6: Do not consider link down nexthops in path selection ipv6: Start path selection from the first nexthop usbnet:fix NPE during rx_complete net: octeontx2: Handle XDP_ABORTED and XDP invalid as XDP_DROP net: fix geneve_opt length integer overflow io_uring/zcrx: fix selftests w/ updated netdev Python helpers selftests: net: use netdevsim in netns test docs: net: document netdev notifier expectations net: dummy: request ops lock netdevsim: add dummy device notifiers net: rename rtnl_net_debug to lock_debug ...
2025-04-04net: avoid false positive warnings in __net_mp_close_rxq()Jakub Kicinski
Commit under Fixes solved the problem of spurious warnings when we uninstall an MP from a device while its down. The __net_mp_close_rxq() which is used by io_uring was not fixed. Move the fix over and reuse __net_mp_close_rxq() in the devmem path. Acked-by: Stanislav Fomichev <sdf@fomichev.me> Fixes: a70f891e0fa0 ("net: devmem: do not WARN conditionally after netdev_rx_queue_restart()") Reviewed-by: Mina Almasry <almasrymina@google.com> Link: https://patch.msgid.link/20250403013405.2827250-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-04net: move mp dev config validation to __net_mp_open_rxq()Jakub Kicinski
devmem code performs a number of safety checks to avoid having to reimplement all of them in the drivers. Move those to __net_mp_open_rxq() and reuse that function for binding to make sure that io_uring ZC also benefits from them. While at it rename the queue ID variable to rxq_idx in __net_mp_open_rxq(), we touch most of the relevant lines. The XArray insertion is reordered after the netdev_rx_queue_restart() call, otherwise we'd need to duplicate the queue index check or risk inserting an invalid pointer. The XArray allocation failures should be extremely rare. Reviewed-by: Mina Almasry <almasrymina@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Fixes: 6e18ed929d3b ("net: add helpers for setting a memory provider on an rx queue") Link: https://patch.msgid.link/20250403013405.2827250-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-04ipv6: Do not consider link down nexthops in path selectionIdo Schimmel
Nexthops whose link is down are not supposed to be considered during path selection when the "ignore_routes_with_linkdown" sysctl is set. This is done by assigning them a negative region boundary. However, when comparing the computed hash (unsigned) with the region boundary (signed), the negative region boundary is treated as unsigned, resulting in incorrect nexthop selection. Fix by treating the computed hash as signed. Note that the computed hash is always in range of [0, 2^31 - 1]. Fixes: 3d709f69a3e7 ("ipv6: Use hash-threshold instead of modulo-N") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20250402114224.293392-3-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-04ipv6: Start path selection from the first nexthopIdo Schimmel
Cited commit transitioned IPv6 path selection to use hash-threshold instead of modulo-N. With hash-threshold, each nexthop is assigned a region boundary in the multipath hash function's output space and a nexthop is chosen if the calculated hash is smaller than the nexthop's region boundary. Hash-threshold does not work correctly if path selection does not start with the first nexthop. For example, if fib6_select_path() is always passed the last nexthop in the group, then it will always be chosen because its region boundary covers the entire hash function's output space. Fix this by starting the selection process from the first nexthop and do not consider nexthops for which rt6_score_route() provided a negative score. Fixes: 3d709f69a3e7 ("ipv6: Use hash-threshold instead of modulo-N") Reported-by: Stanislav Fomichev <stfomichev@gmail.com> Closes: https://lore.kernel.org/netdev/Z9RIyKZDNoka53EO@mini-arch/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20250402114224.293392-2-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-03Merge tag 'nf-25-04-03' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following batch contains Netfilter fixes for net: 1) conncount incorrectly removes element for non-dynamic sets, these elements represent a static control plane configuration, leave them in place. 2) syzbot found a way to unregister a basechain that has been never registered from the chain update path, fix from Florian Westphal. 3) Fix incorrect pointer arithmetics in geneve support for tunnel, from Lin Ma. * tag 'nf-25-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nft_tunnel: fix geneve_opt type confusion addition netfilter: nf_tables: don't unregister hook when table is dormant netfilter: nft_set_hash: GC reaps elements with conncount for dynamic sets only ==================== Link: https://patch.msgid.link/20250403115752.19608-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-03net: fix geneve_opt length integer overflowLin Ma
struct geneve_opt uses 5 bit length for each single option, which means every vary size option should be smaller than 128 bytes. However, all current related Netlink policies cannot promise this length condition and the attacker can exploit a exact 128-byte size option to *fake* a zero length option and confuse the parsing logic, further achieve heap out-of-bounds read. One example crash log is like below: [ 3.905425] ================================================================== [ 3.905925] BUG: KASAN: slab-out-of-bounds in nla_put+0xa9/0xe0 [ 3.906255] Read of size 124 at addr ffff888005f291cc by task poc/177 [ 3.906646] [ 3.906775] CPU: 0 PID: 177 Comm: poc-oob-read Not tainted 6.1.132 #1 [ 3.907131] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 [ 3.907784] Call Trace: [ 3.907925] <TASK> [ 3.908048] dump_stack_lvl+0x44/0x5c [ 3.908258] print_report+0x184/0x4be [ 3.909151] kasan_report+0xc5/0x100 [ 3.909539] kasan_check_range+0xf3/0x1a0 [ 3.909794] memcpy+0x1f/0x60 [ 3.909968] nla_put+0xa9/0xe0 [ 3.910147] tunnel_key_dump+0x945/0xba0 [ 3.911536] tcf_action_dump_1+0x1c1/0x340 [ 3.912436] tcf_action_dump+0x101/0x180 [ 3.912689] tcf_exts_dump+0x164/0x1e0 [ 3.912905] fw_dump+0x18b/0x2d0 [ 3.913483] tcf_fill_node+0x2ee/0x460 [ 3.914778] tfilter_notify+0xf4/0x180 [ 3.915208] tc_new_tfilter+0xd51/0x10d0 [ 3.918615] rtnetlink_rcv_msg+0x4a2/0x560 [ 3.919118] netlink_rcv_skb+0xcd/0x200 [ 3.919787] netlink_unicast+0x395/0x530 [ 3.921032] netlink_sendmsg+0x3d0/0x6d0 [ 3.921987] __sock_sendmsg+0x99/0xa0 [ 3.922220] __sys_sendto+0x1b7/0x240 [ 3.922682] __x64_sys_sendto+0x72/0x90 [ 3.922906] do_syscall_64+0x5e/0x90 [ 3.923814] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 3.924122] RIP: 0033:0x7e83eab84407 [ 3.924331] Code: 48 89 fa 4c 89 df e8 38 aa 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 faf [ 3.925330] RSP: 002b:00007ffff505e370 EFLAGS: 00000202 ORIG_RAX: 000000000000002c [ 3.925752] RAX: ffffffffffffffda RBX: 00007e83eaafa740 RCX: 00007e83eab84407 [ 3.926173] RDX: 00000000000001a8 RSI: 00007ffff505e3c0 RDI: 0000000000000003 [ 3.926587] RBP: 00007ffff505f460 R08: 00007e83eace1000 R09: 000000000000000c [ 3.926977] R10: 0000000000000000 R11: 0000000000000202 R12: 00007ffff505f3c0 [ 3.927367] R13: 00007ffff505f5c8 R14: 00007e83ead1b000 R15: 00005d4fbbe6dcb8 Fix these issues by enforing correct length condition in related policies. Fixes: 925d844696d9 ("netfilter: nft_tunnel: add support for geneve opts") Fixes: 4ece47787077 ("lwtunnel: add options setting and dumping for geneve") Fixes: 0ed5269f9e41 ("net/sched: add tunnel option support to act_tunnel_key") Fixes: 0a6e77784f49 ("net/sched: allow flower to match tunnel options") Signed-off-by: Lin Ma <linma@zju.edu.cn> Reviewed-by: Xin Long <lucien.xin@gmail.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Link: https://patch.msgid.link/20250402165632.6958-1-linma@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-03Merge tag '9p-for-6.15-rc1' of https://github.com/martinetd/linuxLinus Torvalds
Pull 9p updates from Dominique Martinet: - fix handling of bogus (negative/too long) replies - fix crash on mkdir with ACLs (... looks like nobody is using ACLs with semi-recent kernels...) - ipv6 support for trans=tcp - minor concurrency fix to make syzbot happy - minor cleanup * tag '9p-for-6.15-rc1' of https://github.com/martinetd/linux: docs: fs/9p: Add missing "not" in cache documentation 9p: Use hashtable.h for hash_errmap Documentation/fs/9p: fix broken link 9p/trans_fd: mark concurrent read and writes to p9_conn->err 9p/net: return error on bogus (longer than requested) replies 9p/net: fix improper handling of bogus negative read/write replies fs/9p: fix NULL pointer dereference on mkdir net/9p/fd: support ipv6 for trans=tcp
generated by cgit (git 2.34.1) at 2025-05-10 00:13:38 +0000