| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Greg KH:
"Here are some small driver core fixes to resolve a number of reported
problems. Included in here are:
- driver core sync fix revert to resolve a much reported problem,
hopefully this is finally resolved
- MAINTAINERS file update, documenting that the driver-core tree is
now under a "shared" maintainership model, thanks to Rafael and
Danilo for offering to do this!
- auxbus documentation and MAINTAINERS file update
- MAINTAINERS file update for Rust PCI code
- firmware rust binding fixup
- software node link fix
All of these have been in linux-next for over a week with no reported
issues"
* tag 'driver-core-6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
drivers/base/memory: Avoid overhead from for_each_present_section_nr()
software node: Prevent link creation failure from causing kobj reference count imbalance
device property: Add a note to the fwnode.h
drivers/base: Add myself as auxiliary bus reviewer
drivers/base: Extend documentation with preferred way to use auxbus
driver core: fix potential NULL pointer dereference in dev_uevent()
driver core: introduce device_set_driver() helper
Revert "drivers: core: synchronize really_probe() and dev_uevent()"
MAINTAINERS: update the location of the driver-core git tree
rust: firmware: Use `ffi::c_char` type in `FwFunc`
MAINTAINERS: pci: add entry for Rust PCI code
|
|
Add dma_alloc_attrs() and dma_free_attrs() helpers to fix a build
error when CONFIG_HAS_DMA is not enabled.
Note that when CONFIG_HAS_DMA is enabled, dma_alloc_attrs() and
dma_free_attrs() are included in both bindings_generated.rs and
bindings_helpers_generated.rs. The former takes precedence so behavior
remains unchanged in that case.
This fixes the following build error on UML:
error[E0425]: cannot find function `dma_alloc_attrs` in crate `bindings`
--> rust/kernel/dma.rs:171:23
|
171 | bindings::dma_alloc_attrs(
| ^^^^^^^^^^^^^^^ help: a function with a similar name exists: `dma_alloc_pages`
|
::: rust/bindings/bindings_generated.rs:44568:5
|
44568 | / pub fn dma_alloc_pages(
44569 | | dev: *mut device,
44570 | | size: usize,
44571 | | dma_handle: *mut dma_addr_t,
44572 | | dir: dma_data_direction,
44573 | | gfp: gfp_t,
44574 | | ) -> *mut page;
| |___________________- similarly named function `dma_alloc_pages` defined here
error[E0425]: cannot find function `dma_free_attrs` in crate `bindings`
--> rust/kernel/dma.rs:293:23
|
293 | bindings::dma_free_attrs(
| ^^^^^^^^^^^^^^ help: a function with a similar name exists: `dma_free_pages`
|
::: rust/bindings/bindings_generated.rs:44577:5
|
44577 | / pub fn dma_free_pages(
44578 | | dev: *mut device,
44579 | | size: usize,
44580 | | page: *mut page,
44581 | | dma_handle: dma_addr_t,
44582 | | dir: dma_data_direction,
44583 | | );
| |______- similarly named function `dma_free_pages` defined here
Fixes: ad2907b4e308 ("rust: add dma coherent allocator abstraction")
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250412000507.157000-1-fujita.tomonori@gmail.com
[ Reworded for relative paths. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Remove the `volatile` qualifier used with __iomem in helper functions
in io.c. These helper functions are just wrappers around the
corresponding accessors so they are unnecessary.
This fixes the following UML build error with CONFIG_RUST enabled:
In file included from rust/helpers/helpers.c:19:
rust/helpers/io.c:12:10: error: passing 'volatile void *' to parameter of type 'void *' discards qualifiers [-Werror,-Wincompatible-pointer-types-discards-qualifiers]
12 | iounmap(addr);
| ^~~~
arch/um/include/asm/io.h:19:42: note: passing argument to parameter 'addr' here
19 | static inline void iounmap(void __iomem *addr)
| ^
1 error generated.
[ Arnd explains [1] that removing the qualifier is the way forward
(thanks!):
Rihgt, I tried this last week when it came up first, removing the
'volatile' annotations in the asm-generic/io.h header and then
all the ones that caused build regressions on arm/arm64/x86
randconfig and allmodconfig builds. This patch is a little
longer than my original version as I did run into a few
regressions later.
As far as I can tell, none of these volatile annotations have
any actual effect, and most of them date back to ancient kernels
where this may have been required.
Leaving it out of the rust interface is clearly the right way,
and it shouldn't be too hard to upstream the changes below
when we need to, but I also don't see any priority to send these.
If anyone wants to help out, I can send them the whole patch.
I created an issue [2] in case someone wants to help. - Miguel ]
Fixes: ce30d94e6855 ("rust: add `io::{Io, IoRaw}` base types")
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/rust-for-linux/0c844b70-19c7-4b14-ba29-fc99ae0d69f0@app.fastmail.com/ [1]
Link: https://github.com/Rust-for-Linux/linux/issues/1156 [2]
Link: https://lore.kernel.org/r/20250412005341.157150-1-fujita.tomonori@gmail.com
[ Reworded for relative paths. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
The `FwFunc` struct contains an function with a char pointer argument,
for which a `*const u8` pointer was used. This is not really the
"proper" type for this, so use a `*const kernel::ffi::c_char` pointer
instead.
This has no real functionality changes, since now `kernel::ffi::c_char`
(which bindgen uses for `char`) is now a type alias to `u8` anyways,
but before commit 1bae8729e50a ("rust: map `long` to `isize` and `char`
to `u8`") the concrete type of `kernel::ffi::c_char` depended on the
architecture (However all supported architectures at the time mapped to
`i8`).
This caused problems on the v6.13 tag when building for 32 bit arm (with
my patches), since back then `*const i8` was used in the function
argument and the function that bindgen generated used
`*const core::ffi::c_char` which Rust mapped to `*const u8` on 32 bit
arm. The stable v6.13.y branch does not have this issue since commit
1bae8729e50a ("rust: map `long` to `isize` and `char` to `u8`") was
backported.
This caused the following build error:
```
error[E0308]: mismatched types
--> rust/kernel/firmware.rs:20:4
|
20 | Self(bindings::request_firmware)
| ---- ^^^^^^^^^^^^^^^^^^^^^^^^^^ expected fn pointer, found fn item
| |
| arguments to this function are incorrect
|
= note: expected fn pointer `unsafe extern "C" fn(_, *const i8, _) -> _`
found fn item `unsafe extern "C" fn(_, *const u8, _) -> _ {request_firmware}`
note: tuple struct defined here
--> rust/kernel/firmware.rs:14:8
|
14 | struct FwFunc(
| ^^^^^^
error[E0308]: mismatched types
--> rust/kernel/firmware.rs:24:14
|
24 | Self(bindings::firmware_request_nowarn)
| ---- ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ expected fn pointer, found fn item
| |
| arguments to this function are incorrect
|
= note: expected fn pointer `unsafe extern "C" fn(_, *const i8, _) -> _`
found fn item `unsafe extern "C" fn(_, *const u8, _) -> _ {firmware_request_nowarn}`
note: tuple struct defined here
--> rust/kernel/firmware.rs:14:8
|
14 | struct FwFunc(
| ^^^^^^
error[E0308]: mismatched types
--> rust/kernel/firmware.rs:64:45
|
64 | let ret = unsafe { func.0(pfw as _, name.as_char_ptr(), dev.as_raw()) };
| ------ ^^^^^^^^^^^^^^^^^^ expected `*const i8`, found `*const u8`
| |
| arguments to this function are incorrect
|
= note: expected raw pointer `*const i8`
found raw pointer `*const u8`
error: aborting due to 3 previous errors
```
Fixes: de6582833db0 ("rust: add firmware abstractions")
Cc: stable@vger.kernel.org
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Christian Schrefl <chrisi.schrefl@gmail.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/r/20250413-rust_arm_fix_fw_abstaction-v3-1-8dd7c0bbcd47@gmail.com
[ Add firmware prefix to commit subject. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
With CONFIG_PREFIX_SYMBOLS, objtool adds __pfx prefix symbols
to claim the compiler emitted call padding bytes. When
CONFIG_X86_KERNEL_IBT is not selected, the symbols are added to
individual object files and for Rust objects, they end up being
exported, resulting in warnings with CONFIG_GENDWARFKSYMS as the
symbols have no debugging information:
warning: gendwarfksyms: symbol_print_versions: no information for symbol __pfx_rust_helper_put_task_struct
warning: gendwarfksyms: symbol_print_versions: no information for symbol __pfx_rust_helper_task_euid
warning: gendwarfksyms: symbol_print_versions: no information for symbol __pfx_rust_helper_readq_relaxed
...
Filter out the __pfx prefix from exported symbols similarly to
the existing __cfi and __odr_asan prefixes.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Cc: stable@vger.kernel.org
Fixes: ac61506bf2d1 ("rust: Use gendwarfksyms + extended modversions for CONFIG_MODVERSIONS")
Link: https://lore.kernel.org/r/20250318231815.917621-2-samitolvanen@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
"Normal" comments in Rust (`//`) are also formatted in Markdown, like
the documentation (`///` and `//!`), see
Documentation/rust/coding-guidelines.rst
Thus use Markdown autolinks for a couple links that were missing it.
It also helps to get proper linking in some software like kitty [1].
Suggested-by: Benno Lossin <benno.lossin@proton.me>
Link: https://github.com/Rust-for-Linux/pin-init/pull/32#discussion_r2023103712 [1]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://github.com/Rust-for-Linux/pin-init/pull/32/commits/dd230d61bf0538281072fbff4bb71efc58f3420c
Fixes: 84837cf6fa54 ("rust: pin-init: change examples to the user-space version")
Cc: stable@vger.kernel.org
[ Change case in title. Reworded commit message. - Benno ]
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20250407201755.649153-3-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Similar to what was done for `Zeroable<NonNull<T>>` in commit
df27cef15360 ("rust: init: fix `Zeroable` implementation for
`Option<NonNull<T>>` and `Option<KBox<T>>`"), the latest Rust
documentation [1] says it guarantees that `transmute::<_,
Option<T>>([0u8; size_of::<T>()])` is sound and produces
`Option::<T>::None` only in some cases. In particular, it says:
`Box<U>` (specifically, only `Box<U, Global>`) when `U: Sized`
Thus restrict the `impl` to `Sized`, and use similar wording as in that
commit too.
Link: https://doc.rust-lang.org/stable/std/option/index.html#representation [1]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://github.com/Rust-for-Linux/pin-init/pull/32/commits/a6007cf555e5946bcbfafe93a6468c329078acd8
Fixes: 9b2299af3b92 ("rust: pin-init: add `std` and `alloc` support from the user-space version")
Cc: stable@vger.kernel.org
[ Adjust mentioned commit to the one from the kernel. - Benno ]
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20250407201755.649153-2-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Improve performance in gendwarfksyms
- Remove deprecated EXTRA_*FLAGS and KBUILD_ENABLE_EXTRA_GCC_CHECKS
- Support CONFIG_HEADERS_INSTALL for ARCH=um
- Use more relative paths to sources files for better reproducibility
- Support the loong64 Debian architecture
- Add Kbuild bash completion
- Introduce intermediate vmlinux.unstripped for architectures that need
static relocations to be stripped from the final vmlinux
- Fix versioning in Debian packages for -rc releases
- Treat missing MODULE_DESCRIPTION() as an error
- Convert Nios2 Makefiles to use the generic rule for built-in DTB
- Add debuginfo support to the RPM package
* tag 'kbuild-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (40 commits)
kbuild: rpm-pkg: build a debuginfo RPM
kconfig: merge_config: use an empty file as initfile
nios2: migrate to the generic rule for built-in DTB
rust: kbuild: skip `--remap-path-prefix` for `rustdoc`
kbuild: pacman-pkg: hardcode module installation path
kbuild: deb-pkg: don't set KBUILD_BUILD_VERSION unconditionally
modpost: require a MODULE_DESCRIPTION()
kbuild: make all file references relative to source root
x86: drop unnecessary prefix map configuration
kbuild: deb-pkg: add comment about future removal of KDEB_COMPRESS
kbuild: Add a help message for "headers"
kbuild: deb-pkg: remove "version" variable in mkdebian
kbuild: deb-pkg: fix versioning for -rc releases
Documentation/kbuild: Fix indentation in modules.rst example
x86: Get rid of Makefile.postlink
kbuild: Create intermediate vmlinux build with relocations preserved
kbuild: Introduce Kconfig symbol for linking vmlinux with relocations
kbuild: link-vmlinux.sh: Make output file name configurable
kbuild: do not generate .tmp_vmlinux*.map when CONFIG_VMLINUX_MAP=y
Revert "kheaders: Ignore silly-rename files"
...
|
|
Pull ARM and clkdev updates from Russell King:
- Simplify ARM_MMU_KEEP usage
- Add Rust support for ARM architecture version 7
- Align IPIs reported in /proc/interrupts
- require linker to support KEEP within OVERLAY
- add KEEP() for ARM vectors
- add __printf() attribute for clkdev functions
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9445/1: clkdev: Mark some functions with __printf() attribute
ARM: 9444/1: add KEEP() keyword to ARM_VECTORS
ARM: 9443/1: Require linker to support KEEP within OVERLAY for DCE
ARM: 9442/1: smp: Fix IPI alignment in /proc/interrupts
ARM: 9441/1: rust: Enable Rust support for ARMv7
ARM: 9439/1: arm32: simplify ARM_MMU_KEEP usage
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Always select HAVE_VIRT_CPU_ACCOUNTING_GEN
- Enable UBSAN (Undefined Behavior Sanitizer)
- Increase MAX_IO_PICS up to 8
- Increase ARCH_DMA_MINALIGN up to 16
- Fix and improve BPF JIT
- Fix and improve vDSO implementation
- Update the default config file
- Some bug fixes and other small changes
* tag 'loongarch-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Update Loongson-3 default config file
LoongArch: vDSO: Make use of the t8 register for vgetrandom-chacha
LoongArch: vDSO: Remove --hash-style=sysv
LoongArch: BPF: Don't override subprog's return value
LoongArch: BPF: Use move_addr() for BPF_PSEUDO_FUNC
LoongArch: BPF: Fix off-by-one error in build_prologue()
LoongArch: Rework the arch_kgdb_breakpoint() implementation
LoongArch: Fix device node refcount leak in fdt_cpu_clk_init()
LoongArch: Increase ARCH_DMA_MINALIGN up to 16
LoongArch: Increase MAX_IO_PICS up to 8
LoongArch: Fix help text of CMDLINE_EXTEND in Kconfig
LoongArch: Enable UBSAN (Undefined Behavior Sanitizer)
LoongArch: Always select HAVE_VIRT_CPU_ACCOUNTING_GEN
rust: Fix enabling Rust and building with GCC for LoongArch
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / IIO driver updates from Greg KH:
"Here is the big set of char, misc, iio, and other smaller driver
subsystems for 6.15-rc1. Lots of stuff in here, including:
- loads of IIO changes and driver updates
- counter driver updates
- w1 driver updates
- faux conversions for some drivers that were abusing the platform
bus interface
- coresight driver updates
- rust miscdevice binding updates based on real-world-use
- other minor driver updates
All of these have been in linux-next with no reported issues for quite
a while"
* tag 'char-misc-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
samples: rust_misc_device: fix markup in top-level docs
Coresight: Fix a NULL vs IS_ERR() bug in probe
misc: lis3lv02d: convert to use faux_device
tlclk: convert to use faux_device
regulator: dummy: convert to use the faux device interface
bus: mhi: host: Fix race between unprepare and queue_buf
coresight: configfs: Constify struct config_item_type
doc: iio: ad7380: describe offload support
iio: ad7380: add support for SPI offload
iio: light: Add check for array bounds in veml6075_read_int_time_ms
iio: adc: ti-ads7924 Drop unnecessary function parameters
staging: iio: ad9834: Use devm_regulator_get_enable()
staging: iio: ad9832: Use devm_regulator_get_enable()
iio: gyro: bmg160_spi: add of_match_table
dt-bindings: iio: adc: Add i.MX94 and i.MX95 support
iio: adc: ad7768-1: remove unnecessary locking
Documentation: ABI: add wideband filter type to sysfs-bus-iio
iio: adc: ad7768-1: set MOSI idle state to prevent accidental reset
iio: adc: ad7768-1: Fix conversion result sign
iio: adc: ad7124: Benefit of dev = indio_dev->dev.parent in ad7124_parse_channel_config()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updatesk from Greg KH:
"Here is the big set of driver core updates for 6.15-rc1. Lots of stuff
happened this development cycle, including:
- kernfs scaling changes to make it even faster thanks to rcu
- bin_attribute constify work in many subsystems
- faux bus minor tweaks for the rust bindings
- rust binding updates for driver core, pci, and platform busses,
making more functionaliy available to rust drivers. These are all
due to people actually trying to use the bindings that were in
6.14.
- make Rafael and Danilo full co-maintainers of the driver core
codebase
- other minor fixes and updates"
* tag 'driver-core-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (52 commits)
rust: platform: require Send for Driver trait implementers
rust: pci: require Send for Driver trait implementers
rust: platform: impl Send + Sync for platform::Device
rust: pci: impl Send + Sync for pci::Device
rust: platform: fix unrestricted &mut platform::Device
rust: pci: fix unrestricted &mut pci::Device
rust: device: implement device context marker
rust: pci: use to_result() in enable_device_mem()
MAINTAINERS: driver core: mark Rafael and Danilo as co-maintainers
rust/kernel/faux: mark Registration methods inline
driver core: faux: only create the device if probe() succeeds
rust/faux: Add missing parent argument to Registration::new()
rust/faux: Drop #[repr(transparent)] from faux::Registration
rust: io: fix devres test with new io accessor functions
rust: io: rename `io::Io` accessors
kernfs: Move dput() outside of the RCU section.
efi: rci2: mark bin_attribute as __ro_after_init
rapidio: constify 'struct bin_attribute'
firmware: qemu_fw_cfg: constify 'struct bin_attribute'
powerpc/perf/hv-24x7: Constify 'struct bin_attribute'
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Extract the 'pin-init' API from the 'kernel' crate and make it into
a standalone crate.
In order to do this, the contents are rearranged so that they can
easily be kept in sync with the version maintained out-of-tree that
other projects have started to use too (or plan to, like QEMU).
This will reduce the maintenance burden for Benno, who will now
have his own sub-tree, and will simplify future expected changes
like the move to use 'syn' to simplify the implementation.
- Add '#[test]'-like support based on KUnit.
We already had doctests support based on KUnit, which takes the
examples in our Rust documentation and runs them under KUnit.
Now, we are adding the beginning of the support for "normal" tests,
similar to those the '#[test]' tests in userspace Rust. For
instance:
#[kunit_tests(my_suite)]
mod tests {
#[test]
fn my_test() {
assert_eq!(1 + 1, 2);
}
}
Unlike with doctests, the 'assert*!'s do not map to the KUnit
assertion APIs yet.
- Check Rust signatures at compile time for functions called from C
by name.
In particular, introduce a new '#[export]' macro that can be placed
in the Rust function definition. It will ensure that the function
declaration on the C side matches the signature on the Rust
function:
#[export]
pub unsafe extern "C" fn my_function(a: u8, b: i32) -> usize {
// ...
}
The macro essentially forces the compiler to compare the types of
the actual Rust function and the 'bindgen'-processed C signature.
These cases are rare so far. In the future, we may consider
introducing another tool, 'cbindgen', to generate C headers
automatically. Even then, having these functions explicitly marked
may be a good idea anyway.
- Enable the 'raw_ref_op' Rust feature: it is already stable, and
allows us to use the new '&raw' syntax, avoiding a couple macros.
After everyone has migrated, we will disallow the macros.
- Pass the correct target to 'bindgen' on Usermode Linux.
- Fix 'rusttest' build in macOS.
'kernel' crate:
- New 'hrtimer' module: add support for setting up intrusive timers
without allocating when starting the timer. Add support for
'Pin<Box<_>>', 'Arc<_>', 'Pin<&_>' and 'Pin<&mut _>' as pointer
types for use with timer callbacks. Add support for setting clock
source and timer mode.
- New 'dma' module: add a simple DMA coherent allocator abstraction
and a test sample driver.
- 'list' module: make the linked list 'Cursor' point between
elements, rather than at an element, which is more convenient to us
and allows for cursors to empty lists; and document it with
examples of how to perform common operations with the provided
methods.
- 'str' module: implement a few traits for 'BStr' as well as the
'strip_prefix()' method.
- 'sync' module: add 'Arc::as_ptr'.
- 'alloc' module: add 'Box::into_pin'.
- 'error' module: extend the 'Result' documentation, including a few
examples on different ways of handling errors, a warning about
using methods that may panic, and links to external documentation.
'macros' crate:
- 'module' macro: add the 'authors' key to support multiple authors.
The original key will be kept until everyone has migrated.
Documentation:
- Add error handling sections.
MAINTAINERS:
- Add Danilo Krummrich as reviewer of the Rust "subsystem".
- Add 'RUST [PIN-INIT]' entry with Benno Lossin as maintainer. It has
its own sub-tree.
- Add sub-tree for 'RUST [ALLOC]'.
- Add 'DMA MAPPING HELPERS DEVICE DRIVER API [RUST]' entry with
Abdiel Janulgue as primary maintainer. It will go through the
sub-tree of the 'RUST [ALLOC]' entry.
- Add 'HIGH-RESOLUTION TIMERS [RUST]' entry with Andreas Hindborg as
maintainer. It has its own sub-tree.
And a few other cleanups and improvements"
* tag 'rust-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (71 commits)
rust: dma: add `Send` implementation for `CoherentAllocation`
rust: macros: fix `make rusttest` build on macOS
rust: block: refactor to use `&raw mut`
rust: enable `raw_ref_op` feature
rust: uaccess: name the correct function
rust: rbtree: fix comments referring to Box instead of KBox
rust: hrtimer: add maintainer entry
rust: hrtimer: add clocksource selection through `ClockId`
rust: hrtimer: add `HrTimerMode`
rust: hrtimer: implement `HrTimerPointer` for `Pin<Box<T>>`
rust: alloc: add `Box::into_pin`
rust: hrtimer: implement `UnsafeHrTimerPointer` for `Pin<&mut T>`
rust: hrtimer: implement `UnsafeHrTimerPointer` for `Pin<&T>`
rust: hrtimer: add `hrtimer::ScopedHrTimerPointer`
rust: hrtimer: add `UnsafeHrTimerPointer`
rust: hrtimer: allow timer restart from timer handler
rust: str: implement `strip_prefix` for `BStr`
rust: str: implement `AsRef<BStr>` for `[u8]` and `BStr`
rust: str: implement `Index` for `BStr`
rust: str: implement `PartialEq` for `BStr`
...
|
|
This patch fixes a build issue on LoongArch when Rust is enabled and
compiled with GCC by explicitly setting the bindgen target and skipping
C flags that Clang doesn't support.
Cc: stable@vger.kernel.org
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Pull drm updates from Dave Airlie:
"Outside of drm there are some rust patches from Danilo who maintains
that area in here, and some pieces for drm header check tests.
The major things in here are a new driver supporting the touchbar
displays on M1/M2, the nova-core stub driver which is just the vehicle
for adding rust abstractions and start developing a real driver inside
of.
xe adds support for SVM with a non-driver specific SVM core
abstraction that will hopefully be useful for other drivers, along
with support for shrinking for TTM devices. I'm sure xe and AMD
support new devices, but the pipeline depth on these things is hard to
know what they end up being in the marketplace!
uapi:
- add mediatek tiled fourcc
- add support for notifying userspace on device wedged
new driver:
- appletbdrm: support for Apple Touchbar displays on m1/m2
- nova-core: skeleton rust driver to develop nova inside off
firmware:
- add some rust firmware pieces
rust:
- add 'LocalModule' type alias
component:
- add helper to query bound status
fbdev:
- fbtft: remove access to page->index
media:
- cec: tda998x: import driver from drm
dma-buf:
- add fast path for single fence merging
tests:
- fix lockdep warnings
atomic:
- allow full modeset on connector changes
- clarify semantics of allow_modeset and drm_atomic_helper_check
- async-flip: support on arbitary planes
- writeback: fix UAF
- Document atomic-state history
format-helper:
- support ARGB8888 to ARGB4444 conversions
buddy:
- fix multi-root cleanup
ci:
- update IGT
dp:
- support extended wake timeout
- mst: fix RAD to string conversion
- increase DPCD eDP control CAP size to 5 bytes
- add DPCD eDP v1.5 definition
- add helpers for LTTPR transparent mode
panic:
- encode QR code according to Fido 2.2
scheduler:
- add parameter struct for init
- improve job peek/pop operations
- optimise drm_sched_job struct layout
ttm:
- refactor pool allocation
- add helpers for TTM shrinker
panel-orientation:
- add a bunch of new quirks
panel:
- convert panels to multi-style functions
- edp: Add support for B140UAN04.4, BOE NV140FHM-NZ, CSW MNB601LS1-3,
LG LP079QX1-SP0V, MNE007QS3-7, STA 116QHD024002, Starry
116KHD024006, Lenovo T14s Gen6 Snapdragon
- himax-hx83102: Add support for CSOT PNA957QT1-1, Kingdisplay
kd110n11-51ie, Starry 2082109qfh040022-50e
- visionox-r66451: use multi-style MIPI-DSI functions
- raydium-rm67200: Add driver for Raydium RM67200
- simple: Add support for BOE AV123Z7M-N17, BOE AV123Z7M-N17
- sony-td4353-jdi: Use MIPI-DSI multi-func interface
- summit: Add driver for Apple Summit display panel
- visionox-rm692e5: Add driver for Visionox RM692E5
bridge:
- pass full atomic state to various callbacks
- adv7511: Report correct capabilities
- it6505: Fix HDCP V compare
- snd65dsi86: fix device IDs
- nwl-dsi: set bridge type
- ti-sn65si83: add error recovery and set bridge type
- synopsys: add HDMI audio support
xe:
- support device-wedged event
- add mmap support for PCI memory barrier
- perf pmu integration and expose per-engien activity
- add EU stall sampling support
- GPU SVM and Xe SVM implementation
- use TTM shrinker
- add survivability mode to allow the driver to do firmware updates
in critical failure states
- PXP HWDRM support for MTL and LNL
- expose package/vram temps over hwmon
- enable DP tunneling
- drop mmio_ext abstraction
- Reject BO evcition if BO is bound to current VM
- Xe suballocator improvements
- re-use display vmas when possible
- add GuC Buffer Cache abstraction
- PCI ID update for Panther Lake and Battlemage
- Enable SRIOV for Panther Lake
- Refactor VRAM manager location
i915:
- enable extends wake timeout
- support device-wedged event
- Enable DP 128b/132b SST DSC
- FBC dirty rectangle support for display version 30+
- convert i915/xe to drm client setup
- Compute HDMI PLLS for rates not in fixed tables
- Allow DSB usage when PSR is enabled on LNL+
- Enable panel replay without full modeset
- Enable async flips with compressed buffers on ICL+
- support luminance based brightness via DPCD for eDP
- enable VRR enable/disable without full modeset
- allow GuC SLPC default strategies on MTL+ for performance
- lots of display refactoring in move to struct intel_display
amdgpu:
- add device wedged event
- support async page flips on overlay planes
- enable broadcast RGB drm property
- add info ioctl for virt mode
- OEM i2c support for RGB lights
- GC 11.5.2 + 11.5.3 support
- SDMA 6.1.3 support
- NBIO 7.9.1 + 7.11.2 support
- MMHUB 1.8.1 + 3.3.2 support
- DCN 3.6.0 support
- Add dynamic workload profile switching for GC 10-12
- support larger VBIOS sizes
- Mark gttsize parameters as deprecated
- Initial JPEG queue resset support
amdkfd:
- add KFD per process flags for setting precision
- sync pasid values between KGD and KFD
- improve GTT/VRAM handling for APUs
- fix user queue validation on GC7/8
- SDMA queue reset support
raedeon:
- rs400 hyperz fix
i2c:
- td998x: drop platform_data, split driver into media and bridge
ast:
- transmitter chip detection refactoring
- vbios display mode refactoring
- astdp: fix connection status and filter unsupported modes
- cursor handling refactoring
imagination:
- check job dependencies with sched helper
ivpu:
- improve command queue handling
- use workqueue for IRQ handling
- add support HW fault injection
- locking fixes
mgag200:
- add support for G200eH5
msm:
- dpu: add concurrent writeback support for DPU 10.x+
- use LTTPR helpers
- GPU:
- Fix obscure GMU suspend failure
- Expose syncobj timeline support
- Extend GPU devcoredump with pagetable info
- a623 support
- Fix a6xx gen1/gen2 indexed-register blocks in gpu snapshot /
devcoredump
- Display:
- Add cpu-cfg interconnect paths on SM8560 and SM8650
- Introduce KMS OMMU fault handler, causing devcoredump snapshot
- Fixed error pointer dereference in msm_kms_init_aspace()
- DPU:
- Fix mode_changing handling
- Add writeback support on SM6150 (QCS615)
- Fix DSC programming in 1:1:1 topology
- Reworked hardware resource allocation, moving it to the CRTC code
- Enabled support for Concurrent WriteBack (CWB) on SM8650
- Enabled CDM blocks on all relevant platforms
- Reworked debugfs interface for BW/clocks debugging
- Clear perf params before calculating bw
- Support YUV formats on writeback
- Fixed double inclusion
- Fixed writeback in YUV formats when using cloned output, Dropped
wb2_formats_rgb
- Corrected dpu_crtc_check_mode_changed and struct dpu_encoder_virt
kerneldocs
- Fixed uninitialized variable in dpu_crtc_kickoff_clone_mode()
- DSI:
- DSC-related fixes
- Rework clock programming
- DSI PHY:
- Fix 7nm (and lower) PHY programming
- Add proper DT schema definitions for DSI PHY clocks
- HDMI:
- Rework the driver, enabling the use of the HDMI Connector
framework
- Bindings:
- Added eDP PHY on SA8775P
nouveau:
- move drm_slave_encoder interface into driver
- nvkm: refactor GSP RPC
- use LTTPR helpers
mediatek:
- HDMI fixup and refinement
- add MT8188 dsc compatible
- MT8365 SoC support
panthor:
- Expose sizes of intenral BOs via fdinfo
- Fix race between reset and suspend
- Improve locking
qaic:
- Add support for AIC200
renesas:
- Fix limits in DT bindings
rockchip:
- support rk3562-mali
- rk3576: Add HDMI support
- vop2: Add new display modes on RK3588 HDMI0 up to 4K
- Don't change HDMI reference clock rate
- Fix DT bindings
- analogix_dp: add eDP support
- fix shutodnw
solomon:
- Set SPI device table to silence warnings
- Fix pixel and scanline encoding
v3d:
- handle clock
vc4:
- Use drm_exec
- Use dma-resv for wait-BO ioctl
- Remove seqno infrastructure
virtgpu:
- Support partial mappings of GEM objects
- Reserve VGA resources during initialization
- Fix UAF in virtgpu_dma_buf_free_obj()
- Add panic support
vkms:
- Switch to a managed modesetting pipeline
- Add support for ARGB8888
- fix UAf
xlnx:
- Set correct DMA segment size
- use mutex guards
- Fix error handling
- Fix docs"
* tag 'drm-next-2025-03-28' of https://gitlab.freedesktop.org/drm/kernel: (1762 commits)
drm/amd/pm: Update feature list for smu_v13_0_6
drm/amdgpu: Add parameter documentation for amdgpu_sync_fence
drm/amdgpu/discovery: optionally use fw based ip discovery
drm/amdgpu/discovery: use specific ip_discovery.bin for legacy asics
drm/amdgpu/discovery: check ip_discovery fw file available
drm/amd/pm: Remove unnecessay UQ10 to UINT conversion
drm/amd/pm: Remove unnecessay UQ10 to UINT conversion
drm/amdgpu/sdma_v4_4_2: update VM flush implementation for SDMA
drm/amdgpu: Optimize VM invalidation engine allocation and synchronize GPU TLB flush
drm/amd/amdgpu: Increase max rings to enable SDMA page ring
drm/amdgpu: Decode deferred error type in gfx aca bank parser
drm/amdgpu/gfx11: Add Cleaner Shader Support for GFX11.5 GPUs
drm/amdgpu/mes: clean up SDMA HQD loop
drm/amdgpu/mes: enable compute pipes across all MEC
drm/amdgpu/mes: drop MES 10.x leftovers
drm/amdgpu/mes: optimize compute loop handling
drm/amdgpu/sdma: guilty tracking is per instance
drm/amdgpu/sdma: fix engine reset handling
drm/amdgpu: remove invalid usage of sched.ready
drm/amdgpu: add cleaner shader trace point
...
|
|
This commit allows building ARMv7 kernels with Rust support.
The rust core library expects some __eabi_... functions
that are not implemented in the kernel.
Those functions are some float operations and __aeabi_uldivmod.
For now those are implemented with define_panicking_intrinsics!.
This is based on the code by Sven Van Asbroeck from the original
rust branch and inspired by the AArch version by Jamie Cunliffe.
I have tested the rust samples and a custom simple MMIO module
on hardware (De1SoC FPGA + Arm A9 CPU).
Tested-by: Rudraksha Gupta <guptarud@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Christian Schrefl <chrisi.schrefl@gmail.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore:
- Various minor updates to the LSM Rust bindings
Changes include marking trivial Rust bindings as inlines and comment
tweaks to better reflect the LSM hooks.
- Add LSM/SELinux access controls to io_uring_allowed()
Similar to the io_uring_disabled sysctl, add a LSM hook to
io_uring_allowed() to enable LSMs a simple way to enforce security
policy on the use of io_uring. This pull request includes SELinux
support for this new control using the io_uring/allowed permission.
- Remove an unused parameter from the security_perf_event_open() hook
The perf_event_attr struct parameter was not used by any currently
supported LSMs, remove it from the hook.
- Add an explicit MAINTAINERS entry for the credentials code
We've seen problems in the past where patches to the credentials code
sent by non-maintainers would often languish on the lists for
multiple months as there was no one explicitly tasked with the
responsibility of reviewing and/or merging credentials related code.
Considering that most of the code under security/ has a vested
interest in ensuring that the credentials code is well maintained,
I'm volunteering to look after the credentials code and Serge Hallyn
has also volunteered to step up as an official reviewer. I posted the
MAINTAINERS update as a RFC to LKML in hopes that someone else would
jump up with an "I'll do it!", but beyond Serge it was all crickets.
- Update Stephen Smalley's old email address to prevent confusion
This includes a corresponding update to the mailmap file.
* tag 'lsm-pr-20250323' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
mailmap: map Stephen Smalley's old email addresses
lsm: remove old email address for Stephen Smalley
MAINTAINERS: add Serge Hallyn as a credentials reviewer
MAINTAINERS: add an explicit credentials entry
cred,rust: mark Credential methods inline
lsm,rust: reword "destroy" -> "release" in SecurityCtx
lsm,rust: mark SecurityCtx methods inline
perf: Remove unnecessary parameter of security check
lsm: fix a missing security_uring_allowed() prototype
io_uring,lsm,selinux: add LSM hooks for io_uring_setup()
io_uring: refactor io_uring_allowed()
|
|
https://github.com/Rust-for-Linux/linux into rust-next
Pull rust-hrtimer updates from Andreas Hindborg:
"Introduce Rust support for the 'hrtimer' subsystem:
- Add a way to use the 'hrtimer' subsystem from Rust. Rust code can
now set up intrusive timers without allocating when starting the
timer.
- Add support for 'Pin<Box<_>>', 'Arc<_>', 'Pin<&_>' and
'Pin<&mut _>' as pointer types for use with timer callbacks.
- Add support for setting clock source and timer mode.
'kernel' crate:
- Add 'Arc::as_ptr' for converting an 'Arc' to a raw pointer. This is
a dependency for the 'hrtimer' API.
- Add 'Box::into_pin' for converting a 'Box<_>' into a 'Pin<Box<_>>'
to align with Rust 'alloc'. This is a dependency for the 'hrtimer'
API."
* tag 'rust-hrtimer-for-v6.15-v3' of https://github.com/Rust-for-Linux/linux:
rust: hrtimer: add maintainer entry
rust: hrtimer: add clocksource selection through `ClockId`
rust: hrtimer: add `HrTimerMode`
rust: hrtimer: implement `HrTimerPointer` for `Pin<Box<T>>`
rust: alloc: add `Box::into_pin`
rust: hrtimer: implement `UnsafeHrTimerPointer` for `Pin<&mut T>`
rust: hrtimer: implement `UnsafeHrTimerPointer` for `Pin<&T>`
rust: hrtimer: add `hrtimer::ScopedHrTimerPointer`
rust: hrtimer: add `UnsafeHrTimerPointer`
rust: hrtimer: allow timer restart from timer handler
rust: hrtimer: implement `HrTimerPointer` for `Arc`
rust: sync: add `Arc::as_ptr`
rust: hrtimer: introduce hrtimer support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"Locking primitives:
- Micro-optimize percpu_{,try_}cmpxchg{64,128}_op() and
{,try_}cmpxchg{64,128} on x86 (Uros Bizjak)
- mutexes: extend debug checks in mutex_lock() (Yunhui Cui)
- Misc cleanups (Uros Bizjak)
Lockdep:
- Fix might_fault() lockdep check of current->mm->mmap_lock (Peter
Zijlstra)
- Don't disable interrupts on RT in disable_irq_nosync_lockdep.*()
(Sebastian Andrzej Siewior)
- Disable KASAN instrumentation of lockdep.c (Waiman Long)
- Add kasan_check_byte() check in lock_acquire() (Waiman Long)
- Misc cleanups (Sebastian Andrzej Siewior)
Rust runtime integration:
- Use Pin for all LockClassKey usages (Mitchell Levy)
- sync: Add accessor for the lock behind a given guard (Alice Ryhl)
- sync: condvar: Add wait_interruptible_freezable() (Alice Ryhl)
- sync: lock: Add an example for Guard:: Lock_ref() (Boqun Feng)
Split-lock detection feature (x86):
- Fix warning mode with disabled mitigation mode (Maksim Davydov)
Locking events:
- Add locking events for rtmutex slow paths (Waiman Long)
- Add locking events for lockdep (Waiman Long)"
* tag 'locking-core-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lockdep: Remove disable_irq_lockdep()
lockdep: Don't disable interrupts on RT in disable_irq_nosync_lockdep.*()
rust: lockdep: Use Pin for all LockClassKey usages
rust: sync: condvar: Add wait_interruptible_freezable()
rust: sync: lock: Add an example for Guard:: Lock_ref()
rust: sync: Add accessor for the lock behind a given guard
locking/lockdep: Add kasan_check_byte() check in lock_acquire()
locking/lockdep: Disable KASAN instrumentation of lockdep.c
locking/lock_events: Add locking events for lockdep
locking/lock_events: Add locking events for rtmutex slow paths
x86/split_lock: Fix the delayed detection logic
lockdep/mm: Fix might_fault() lockdep check of current->mm->mmap_lock
x86/locking: Remove semicolon from "lock" prefix
locking/mutex: Add MUTEX_WARN_ON() into fast path
x86/locking: Use asm_inline for {,try_}cmpxchg{64,128} emulations
x86/locking: Use ALT_OUTPUT_SP() for percpu_{,try_}cmpxchg{64,128}_op()
|
|
Pull bitmap updates from Yury Norov:
- cpumask_next_wrap() rework (me)
- GENMASK() simplification (I Hsin)
- rust bindings for cpumasks (Viresh and me)
- scattered cleanups (Andy, Tamir, Vincent, Ignacio and Joel)
* tag 'bitmap-for-6.15' of https://github.com/norov/linux: (22 commits)
cpumask: align text in comment
riscv: fix test_and_{set,clear}_bit ordering documentation
treewide: fix typo 'unsigned __init128' -> 'unsigned __int128'
MAINTAINERS: add rust bindings entry for bitmap API
rust: Add cpumask helpers
uapi: Revert "bitops: avoid integer overflow in GENMASK(_ULL)"
cpumask: drop cpumask_next_wrap_old()
PCI: hv: Switch hv_compose_multi_msi_req_get_cpu() to using cpumask_next_wrap()
scsi: lpfc: rework lpfc_next_{online,present}_cpu()
scsi: lpfc: switch lpfc_irq_rebalance() to using cpumask_next_wrap()
s390: switch stop_machine_yield() to using cpumask_next_wrap()
padata: switch padata_find_next() to using cpumask_next_wrap()
cpumask: use cpumask_next_wrap() where appropriate
cpumask: re-introduce cpumask_next{,_and}_wrap()
cpumask: deprecate cpumask_next_wrap()
powerpc/xmon: simplify xmon_batch_next_cpu()
ibmvnic: simplify ibmvnic_set_queue_affinity()
virtio_net: simplify virtnet_set_affinity()
objpool: rework objpool_pop()
cpumask: add for_each_{possible,online}_cpu_wrap
...
|
|
Pull workqueue update from Tejun Heo:
"Just one commit to expose system BH workqueues to rust"
* tag 'wq-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
rust: workqueue: define built-in bh queues
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs rust updates from Christian Brauner:
"This contains minor fixes and improvements to rust file bindings:
- Optimize rust symbol generation for FileDescriptorReservation
- Optimize rust symbol generation for SeqFile"
* tag 'vfs-6.15-rc1.rust' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
rust: optimize rust symbol generation for SeqFile
rust: file: optimize rust symbol generation for FileDescriptorReservation
|
|
Stephen found a future build failure in linux-next [1]:
error[E0277]: `*mut MyStruct` cannot be sent between threads safely
--> samples/rust/rust_dma.rs:47:22
|
47 | impl pci::Driver for DmaSampleDriver {
| ^^^^^^^^^^^^^^^ `*mut MyStruct` cannot be sent between threads safely
It is caused by the interaction between commit 935e1d90bf6f ("rust: pci:
require Send for Driver trait implementers") from the driver-core tree,
which fixes a missing concurrency requirement, and commit 9901addae63b
("samples: rust: add Rust dma test sample driver") which adds a sample
that does not satisfy that requirement.
Add a `Send` implementation to `CoherentAllocation`, which allows the
sample (and other future users) to satisfy it.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20250324215702.1515ba92@canb.auug.org.au/ [1]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20250324174048.1075597-1-ojeda@kernel.org
[ Added number to Closes. Fix typo spotted by Boqun. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Do not emit `#[link_section = ".modinfo"]` on macOS (i.e. when building
userspace tests); .modinfo is not a legal section specifier in mach-o.
Before this change tests failed to compile:
---- ../rust/macros/lib.rs - module (line 66) stdout ----
rustc-LLVM ERROR: Global variable '_ZN8rust_out13__module_init13__module_init27__MY_DEVICE_DRIVER_MODULE_017h141f80536770e0d4E' has an invalid section specifier '.modinfo': mach-o section specifier requires a segment and section separated by a comma.
Couldn't compile the test.
---- ../rust/macros/lib.rs - module (line 33) stdout ----
rustc-LLVM ERROR: Global variable '_ZN8rust_out13__module_init13__module_init20__MY_KERNEL_MODULE_017h5d79189564b41e07E' has an invalid section specifier '.modinfo': mach-o section specifier requires a segment and section separated by a comma.
Couldn't compile the test.
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Link: https://lore.kernel.org/r/20250210-macros-section-v2-1-3bb9ff44b969@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Replace all occurrences (one) of `addr_of_mut!(place)` with
`&raw mut place`.
This will allow us to reduce macro complexity, and improve consistency
with existing reference syntax as `&raw mut` is similar to `&mut` making
it fit more naturally with other existing code.
Suggested-by: Benno Lossin <benno.lossin@proton.me>
Link: https://github.com/Rust-for-Linux/linux/issues/1148
Signed-off-by: Antonio Hickey <contact@antoniohickey.com>
Acked-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20250320020740.1631171-17-contact@antoniohickey.com
[ Reworded slightly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Since Rust 1.82.0 the `raw_ref_op` feature is stable [1].
By enabling this feature we can use `&raw const place` and
`&raw mut place` instead of using `addr_of!(place)` and
`addr_of_mut!(place)` macros.
Allowing us to reduce macro complexity, and improve consistency
with existing reference syntax as `&raw const`, `&raw mut` are
similar to `&`, `&mut` making it fit more naturally with other
existing code.
Suggested-by: Benno Lossin <benno.lossin@proton.me>
Link: https://github.com/Rust-for-Linux/linux/issues/1148
Link: https://blog.rust-lang.org/2024/10/17/Rust-1.82.0.html#native-syntax-for-creating-a-raw-pointer [1]
Signed-off-by: Antonio Hickey <contact@antoniohickey.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Tamir Duberstein <tamird@gmail.com>
Link: https://lore.kernel.org/r/20250320020740.1631171-2-contact@antoniohickey.com
[ Removed dashed line change as discussed. Added Link to the explanation
of the feature in the Rust 1.82.0 release blog post. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Correctly refer to `reserve` rather than `try_reserve` in a comment. This
comment has been incorrect since inception in commit 1b580e7b9ba2 ("rust:
uaccess: add userspace pointers").
Fixes: 1b580e7b9ba2 ("rust: uaccess: add userspace pointers")
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Charalampos Mitrodimas <charmitro@posteo.net>
Link: https://lore.kernel.org/r/20250317-uaccess-typo-reserve-v1-1-bbfcb45121f3@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Several safety comments in the RBTree implementation still refer to
"Box::from_raw" and "Box::into_raw", but the code actually uses KBox.
These comments were not updated when the implementation transitioned
from using Box to KBox.
Fixes: 8373147ce496 ("rust: treewide: switch to our kernel `Box` type")
Signed-off-by: Charalampos Mitrodimas <charmitro@posteo.net>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250315-rbtree-comment-fixes-v1-1-51f72c420ff0@posteo.net
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
`rustdoc` only recognizes `--remap-path-prefix` starting with
Rust 1.81.0, which is later than on minimum, so we cannot pass it
unconditionally. Otherwise, we get:
error: Unrecognized option: 'remap-path-prefix'
Note that `rustc` (the compiler) does recognize the flag since a long
time ago (1.26.0).
Moreover, `rustdoc` since Rust 1.82.0 ICEs in out-of-tree builds when
using `--remap-path-prefix`. The issue has been reduced and reported
upstream [1].
Thus workaround both issues by simply skipping the flag when generating
the docs -- it is not critical there anyway.
The ICE does not reproduce under `--test`, but we still need to skip
the flag as well for `RUSTDOC TK` since it is not recognized.
Fixes: dbdffaf50ff9 ("kbuild, rust: use -fremap-path-prefix to make paths relative")
Link: https://github.com/rust-lang/rust/issues/138520 [1]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Tamir Duberstein <tamird@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Allow selecting a clock source for timers by passing a `ClockId`
variant to `HrTimer::new`.
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20250309-hrtimer-v3-v6-12-rc2-v12-12-73586e2bd5f1@kernel.org
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
|
|
Allow selection of timer mode by passing a `HrTimerMode` variant to
`HrTimer::new`.
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20250309-hrtimer-v3-v6-12-rc2-v12-11-73586e2bd5f1@kernel.org
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
|
|
Allow `Pin<Box<T>>` to be the target of a timer callback.
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20250309-hrtimer-v3-v6-12-rc2-v12-10-73586e2bd5f1@kernel.org
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
|
|
Add an associated function to convert a `Box<T>` into a `Pin<Box<T>>`.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20250309-hrtimer-v3-v6-12-rc2-v12-9-73586e2bd5f1@kernel.org
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
|
|
Allow pinned mutable references to structs that contain a `HrTimer` node to
be scheduled with the `hrtimer` subsystem.
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20250309-hrtimer-v3-v6-12-rc2-v12-8-73586e2bd5f1@kernel.org
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
|
|
Allow pinned references to structs that contain a `HrTimer` node to be
scheduled with the `hrtimer` subsystem.
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20250309-hrtimer-v3-v6-12-rc2-v12-7-73586e2bd5f1@kernel.org
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
|
|
Add the trait `ScopedHrTimerPointer` to allow safe use of stack allocated
timers. Safety is achieved by pinning the stack in place while timers are
running.
Implement the trait for all types that implement `UnsafeHrTimerPointer`.
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20250309-hrtimer-v3-v6-12-rc2-v12-6-73586e2bd5f1@kernel.org
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
|
|
Add a trait to allow unsafely queuing stack allocated timers.
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20250309-hrtimer-v3-v6-12-rc2-v12-5-73586e2bd5f1@kernel.org
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
|
|
Allow timer handlers to report that they want a timer to be restarted after
the timer handler has finished executing.
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Tamir Duberstein <tamird@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20250309-hrtimer-v3-v6-12-rc2-v12-4-73586e2bd5f1@kernel.org
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
|
|
Implement `strip_prefix` for `BStr` by deferring to `slice::strip_prefix`
on the underlying `&[u8]`.
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Tested-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Tested-by: Daniel Gomez <da.gomez@samsung.com>
Link: https://lore.kernel.org/r/20250227-module-params-v3-v8-4-ceeee85d9347@kernel.org
[ Pluralized section name. Hid `use`. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Implement `AsRef<BStr>` for `[u8]` and `BStr` so these can be used
interchangeably for operations on `BStr`.
Reviewed-by: Gary Guo <gary@garyguo.net>
Tested-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Tested-by: Daniel Gomez <da.gomez@samsung.com>
Link: https://lore.kernel.org/r/20250227-module-params-v3-v8-3-ceeee85d9347@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
The `Index` implementation on `BStr` was lost when we switched `BStr` from
a type alias of `[u8]` to a newtype. Add back `Index` by implementing
`Index` for `BStr` when `Index` would be implemented for `[u8]`.
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Tested-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Daniel Gomez <da.gomez@samsung.com>
Link: https://lore.kernel.org/r/20250227-module-params-v3-v8-2-ceeee85d9347@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Implement `PartialEq` for `BStr` by comparing underlying byte slices.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Tested-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Tested-by: Daniel Gomez <da.gomez@samsung.com>
Link: https://lore.kernel.org/r/20250227-module-params-v3-v8-1-ceeee85d9347@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Add a simple dma coherent allocator rust abstraction. Based on
Andreas Hindborg's dma abstractions from the rnvme driver, which
was also based on earlier work by Wedson Almeida Filho.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@gmail.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250317185345.2608976-3-abdiel.janulgue@gmail.com
Nacked-by: Christoph Hellwig <hch@lst.de>
[ Removed period. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Trivial addition for missing EOVERFLOW error. This is used by a
subsequent patch that might require returning EOVERFLOW as a result
of `checked_mul`.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@gmail.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250317185345.2608976-2-abdiel.janulgue@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
The instance of Self, returned and created by Driver::probe() is
dropped in the bus' remove() callback.
Request implementers of the Driver trait to implement Send, since the
remove() callback is not guaranteed to run from the same thread as
probe().
Fixes: 683a63befc73 ("rust: platform: add basic platform device / driver abstractions")
Cc: stable <stable@kernel.org>
Reported-by: Alice Ryhl <aliceryhl@google.com>
Closes: https://lore.kernel.org/lkml/Z9rDxOJ2V2bPjj5i@google.com/
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20250319145350.69543-2-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The instance of Self, returned and created by Driver::probe() is
dropped in the bus' remove() callback.
Request implementers of the Driver trait to implement Send, since the
remove() callback is not guaranteed to run from the same thread as
probe().
Fixes: 1bd8b6b2c5d3 ("rust: pci: add basic PCI device / driver abstractions")
Cc: stable <stable@kernel.org>
Reported-by: Alice Ryhl <aliceryhl@google.com>
Closes: https://lore.kernel.org/lkml/Z9rDxOJ2V2bPjj5i@google.com/
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20250319145350.69543-1-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In some cases, we need to call test-only code from outside the test
case, for example, to mock a function or a module.
In order to check whether we are in a test or not, we need to test if
`CONFIG_KUNIT` is set.
Unfortunately, we cannot rely only on this condition because:
- a test could be running in another thread,
- some distros compile KUnit in production kernels, so checking at runtime
that `current->kunit_test != NULL` is required.
Forturately, KUnit provides an optimised check in
`kunit_get_current_test()`, which checks CONFIG_KUNIT, a global static
key, and then the current thread's running KUnit test.
Add a safe wrapper function around this to know whether or not we are in
a KUnit test and examples showing how to mock a function and a module.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Co-developed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Co-developed-by: David Gow <davidgow@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Link: https://lore.kernel.org/r/20250307090103.918788-4-davidgow@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Add a new procedural macro (`#[kunit_tests(kunit_test_suit_name)]`) to
run KUnit tests using a user-space like syntax.
The macro, that should be used on modules, transforms every `#[test]`
in a `kunit_case!` and adds a `kunit_unsafe_test_suite!` registering
all of them.
The only difference with user-space tests is that instead of using
`#[cfg(test)]`, `#[kunit_tests(kunit_test_suit_name)]` is used.
Note that `#[cfg(CONFIG_KUNIT)]` is added so the test module is not
compiled when `CONFIG_KUNIT` is set to `n`.
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Co-developed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Co-developed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Tamir Duberstein <tamird@gmail.com>
Signed-off-by: David Gow <davidgow@google.com>
Link: https://lore.kernel.org/r/20250307090103.918788-3-davidgow@google.com
[ Removed spurious (in rendered form) newline in docs. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Add a couple of Rust const functions and macros to allow to develop
KUnit tests without relying on generated C code:
- The `kunit_unsafe_test_suite!` Rust macro is similar to the
`kunit_test_suite` C macro. It requires a NULL-terminated array of
test cases (see below).
- The `kunit_case` Rust function is similar to the `KUNIT_CASE` C macro.
It generates as case from the name and function.
- The `kunit_case_null` Rust function generates a NULL test case, which
is to be used as delimiter in `kunit_test_suite!`.
While these functions and macros can be used on their own, a future
patch will introduce another macro to create KUnit tests using a
user-space like syntax.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Co-developed-by: Matt Gilbride <mattgilbride@google.com>
Signed-off-by: Matt Gilbride <mattgilbride@google.com>
Co-developed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Co-developed-by: David Gow <davidgow@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Link: https://lore.kernel.org/r/20250307090103.918788-2-davidgow@google.com
[ Applied Markdown in comment. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
The kunitconfig file in a directory is used by kunit.py to enable all
necessary kernel configurations to run the tests in that subdirectory.
Add such a file for rust/.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: David Gow <davidgow@google.com>
Link: https://lore.kernel.org/r/20250208-rust-kunit-v1-2-94a026be6d72@weissschuh.net
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
