| Age | Commit message (Collapse) | Author |
|---|
|
Back-merge of 6.15 devel branch for further development of HD-audio
stuff.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When an event with UMP message is sent to a UMP client, the EP port
receives always no matter where the event is sent to, as it's a
catch-all port. OTOH, if an event is sent to EP port, and if the
event has a certain UMP Group, it should have been delivered to the
associated UMP Group port, too, but this was ignored, so far.
This patch addresses the behavior. Now a UMP event sent to the
Endpoint port will be delivered to the subscribers of the UMP group
port the event is associated with.
The patch also does a bit of refactoring to simplify the code about
__deliver_to_subscribers().
Fixes: 177ccf811df4 ("ALSA: seq: Support MIDI 2.0 UMP Endpoint port")
Link: https://patch.msgid.link/20250511134528.6314-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The last use of snd_seq_queue_client_leave_cells() was removed in 2018
by
commit 85d59b57be59 ("ALSA: seq: Remove superfluous
snd_seq_queue_client_leave_cells() call")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250502235219.1000429-4-linux@treblig.org
|
|
Back-merge of 6.14 devel branch for further developments of TAS
codecsBack-merge of 6.14 devel branch for further developments.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The proc read of each client should protect against the concurrent
data changes to keep the data consistent; although they are supposed
to be safe and won't crash things, it doesn't guarantee the
consistency between the read values. Take client->ioctl_mutex for
protecting against the concurrent changes.
Link: https://patch.msgid.link/20250307084246.29271-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
snd_seq_poll() calls snd_seq_write_pool_allocated() that reads out a
field in client->pool object, while it can be updated concurrently via
ioctls, as reported by syzbot. The data race itself is harmless, as
it's merely a poll() call, and the state is volatile. OTOH, the read
out of poll object info from the caller side is fragile, and we can
leave it better in snd_seq_pool_poll_wait() alone.
A similar pattern is seen in snd_seq_kernel_client_write_poll(), too,
which is called from the OSS sequencer.
This patch drops the pool checks from the caller side and add the
pool->lock in snd_seq_pool_poll_wait() for better data consistency.
Reported-by: syzbot+2d373c9936c00d7e120c@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/67c88903.050a0220.15b4b9.0028.GAE@google.com
Link: https://patch.msgid.link/20250307084246.29271-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
snd_seq_client_use_ptr() is supposed to return the snd_seq_client
object for the given client ID, and it tries to handle the module
auto-loading when no matching object is found. Although the module
handling is performed only conditionally with "!in_interrupt()", this
condition may be fragile, e.g. when the code is called from the ALSA
timer callback where the spinlock is temporarily disabled while the
irq is disabled. Then his doesn't fit well and spews the error about
sleep from invalid context, as complained recently by syzbot.
Also, in general, handling the module-loading at each time if no
matching object is found is really an overkill. It can be still
useful when performed at the top-level ioctl or proc reads, but it
shouldn't be done at event delivery at all.
For addressing the issues above, this patch disables the module
handling in snd_seq_client_use_ptr() in normal cases like event
deliveries, but allow only in limited and safe situations.
A new function client_load_and_use_ptr() is used for the cases where
the module loading can be done safely, instead.
Reported-by: syzbot+4cb9fad083898f54c517@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/67c272e5.050a0220.dc10f.0159.GAE@google.com
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250301114530.8975-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Fix below inconsistent indenting smatch warning.
smatch warnings:
sound/core/seq/oss/seq_oss_event.c:297 note_on_event() warn: inconsistent indenting
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Link: https://patch.msgid.link/20250228033427.7056-1-hanchunchao@inspur.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When a destination client is a user client in the legacy MIDI mode and
it sets the no-UMP-conversion flag, currently the all UMP events are
still passed as-is. But this may confuse the user-space, because the
event packet size is different from the legacy mode.
Since we cannot handle UMP events in user clients unless it's running
in the UMP client mode, we should filter out those events instead of
accepting blindly. This patch addresses it by slightly adjusting the
conditions for UMP event handling at the event delivery time.
Fixes: 329ffe11a014 ("ALSA: seq: Allow suppressing UMP conversions")
Link: https://lore.kernel.org/b77a2cd6-7b59-4eb0-a8db-22d507d3af5f@gmail.com
Link: https://patch.msgid.link/20250217170034.21930-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Pull pending ASoC and HD-audio fixes for 6.14-rc1
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
So far we notify the sequencer client and port changes upon UMP FB
changes, but those aren't really corresponding to the UMP updates.
e.g. when a FB info gets updated, it's not notified but done only when
some of sequencer port attribute is changed. This is no ideal
behavior.
This patch adds the two new sequencer event types for notifying the
UMP EP and FB changes via the announce port. The new event takes
snd_seq_ev_ump_notify type data, which is compatible with
snd_seq_addr (where the port number is replaced with the block
number).
The events are sent when the EP and FB info gets updated explicitly
via ioctl, or the backend UMP receives the corresponding UMP
messages.
The sequencer protocol version is bumped to 1.0.5 along with it.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250110155943.31578-9-tiwai@suse.de
|
|
Currently the system notification helper assumes only the non-atomic
delivery. For allowing an event delivery in non-atomic context, add
the atomic flag to the helper function.
This is a preliminary change for the support of UMP EP/FB
notification.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250110155943.31578-8-tiwai@suse.de
|
|
Use the standard helper str_enabled_disabled() to simplify the code.
Only code refactoring, no behavior change.
Link: https://patch.msgid.link/20250107155641.4435-7-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
CONFIG_SND_SEQ_UMP_CLIENT is a Kconfig for a sequencer client
corresponding to the UMP rawmidi, while we have another major knob
CONFIG_SND_SEQ_UMP that specifies whether the sequencer core supports
UMP packets or not. Strictly speaking both of them are independent,
but practically seen, it makes no sense to enable
CONFIG_SND_SEQ_UMP_CLIENT without UMP support itself.
This patch makes such an implicit dependency clearer. Now
CONFIG_SND_SEQ_UMP_CLIENT depends on both CONFIG_SND_UMP and
CONFIG_SND_SEQ_UMP. Meanwhile, CONFIG_SND_SEQ_UMP is enabled as
default when CONFIG_SND_UMP is set.
Fixes: 81fd444aa371 ("ALSA: seq: Bind UMP device")
Link: https://patch.msgid.link/20250101125548.25961-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When the kernel is built without UMP support but a user-space app
requires the midi_version > 0, the kernel should return an error.
Otherwise user-space assumes as if it were possible to deal,
eventually hitting serious errors later.
Fixes: 46397622a3fa ("ALSA: seq: Add UMP support")
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20241231145358.21946-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The recent bug report spotted on the old OSS sequencer code that tries
to combine incoming SysEx messages to a single sequencer event. This
is good, per se, but it has more demerits:
- The sysex message delivery is delayed until the very last event
- The use of internal buffer forced the serialization
The recent fix in commit 0179488ca992 ("ALSA: seq: oss: Fix races at
processing SysEx messages") addressed the latter, but a better fix is
to handle the sysex messages immediately, i.e. just send each incoming
fragmented sysex message as is. And this patch implements that.
This resulted in a significant cleanup as well.
Note that the only caller of snd_seq_oss_synth_sysex() is
snd_seq_oss_process_event(), and all its callers dispatch the event
immediately, so we can just put the passed buffer pointer to the event
record to be handled.
Reported-and-tested-by: Kun Hu <huk23@m.fudan.edu.cn>
Link: https://lore.kernel.org/2B7E93E4-B13A-4AE4-8E87-306A8EE9BBB7@m.fudan.edu.cn
Link: https://patch.msgid.link/20241231115523.15796-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Pull 6.13 devel branch for further development of sequencer stuff.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
OSS sequencer handles the SysEx messages split in 6 bytes packets, and
ALSA sequencer OSS layer tries to combine those. It stores the data
in the internal buffer and this access is racy as of now, which may
lead to the out-of-bounds access.
As a temporary band-aid fix, introduce a mutex for serializing the
process of the SysEx message packets.
Reported-by: Kun Hu <huk23@m.fudan.edu.cn>
Closes: https://lore.kernel.org/2B7E93E4-B13A-4AE4-8E87-306A8EE9BBB7@m.fudan.edu.cn
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20241230110543.32454-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The word 'annoucement' is wrong, so fix it.
Signed-off-by: Zhu Jun <zhujun2@cmss.chinamobile.com>
Link: https://patch.msgid.link/20241206031727.20500-1-zhujun2@cmss.chinamobile.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The notification via system announce port isn't a lightweight task,
hence it'd be better to skip if there is no subscription is done for
the announce port. Implement a simple counter for checking that by
hooking the subscribe and unsubscribe callbacks.
Link: https://patch.msgid.link/20241128074801.32253-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
It was supposed to be notified when a sequencer client info and a port
info has changed (via SNDRV_SEQ_EVENT_CLIENT_CHANGE and
SNDRV_SEQ_EVENT_PORT_CHANGE event, respectively), and there are
already helper functions. But those aren't really sent from the
driver so far, except for the recent support of UMP, simply due to the
lack of implementations.
This patch adds the missing notifications at updating the client and
the port info. The formerly added notification for UMP is dropped
because it's handled now in the port info side.
Reported-by: Mark Lentczner <mark@glyphic.com>
Link: https://lore.kernel.org/CAPnksqRok7xGa4bxq9WWimVV=28-7_j628OmrWLS=S0=hzaTHQ@mail.gmail.com
Link: https://patch.msgid.link/20241128074734.32165-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
update_port_infos() is called when a UMP FB Info update notification
is received, and this function is supposed to update the attributes of
the corresponding sequencer port. However, the function had a few
issues and it brought to the incorrect states. Namely:
- It tried to get a wrong sequencer info for the update without
correcting the port number with the group-offset 1
- The loop exited immediately when a sequencer port isn't present;
this ended up with the truncation if a sequencer port in the middle
goes away
This patch addresses those bugs.
Fixes: 4a16a3af0571 ("ALSA: seq: ump: Handle FB info update")
Link: https://patch.msgid.link/20241128170423.23351-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
no_llseek had been defined to NULL two years ago, in commit 868941b14441
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull ALSA sequencer cleanup.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
All callers of get_event_dest_clienter() pass 0 to the filter
argument, and it means that the check there is utterly redundant.
Drop the superfluous filter argument and its check as a code cleanup.
Link: https://patch.msgid.link/20240819084757.11902-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
UMP events don't use the event type field, hence it's invalid to apply
the filter, which may drop the events unexpectedly.
Skip the event filtering for UMP events, instead.
Fixes: 46397622a3fa ("ALSA: seq: Add UMP support")
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240819084156.10286-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
These functions are never implemented and used.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://patch.msgid.link/20240817093334.1120002-1-yuehaibing@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Pull control lookup optimization changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The recent extension added a new ALSA sequencer port info flag bit
SNDRV_SEQ_PORT_FLG_IS_MIDI1, but it's not reported back when
inquired. Fix it to report properly.
Fixes: 0079c9d1e58a ("ALSA: ump: Handle MIDI 1.0 Function Block in MIDI 2.0 protocol")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807092303.1935-7-tiwai@suse.de
|
|
When a sequencer port assigned to a UMP Group that is specific to MIDI
1.0 among MIDI 2.0 client, mark it explicitly in the proc output, so
that user can see it easily. This is an exceptional case where the
message isn't converted to MIDI 1.0 even if the client is running in
MIDI 2.0 mode.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807092303.1935-6-tiwai@suse.de
|
|
The UMP v1.1 spec says in the section 6.2.1:
"If a UMP Endpoint declares MIDI 2.0 Protocol but a Function Block
represents a MIDI 1.0 connection, then may optionally be used for
messages to/from that Function Block."
It implies that the driver can (and should) keep MIDI 1.0 CVM
exceptionally for those FBs even if UMP Endpoint is running in MIDI
2.0 protocol, and the current driver lacks of it.
This patch extends the sequencer port info to indicate a MIDI 1.0
port, and tries to send/receive MIDI 1.0 CVM as is when this port is
the source or sink. The sequencer port flag is set by the driver at
parsing FBs and GTBs although application can set it to its own
user-space clients, too.
Link: https://patch.msgid.link/20240806070024.14301-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
RPN with 127:127 is treated as a Null RPN, just to reset the
parameters, and it's not translated to MIDI2. Although the current
code can work as is in most cases, better to implement the RPN reset
explicitly for Null message.
Link: https://patch.msgid.link/20240731130528.12600-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Just like the core UMP conversion helper, we need to deal with the
partially-filled RPN/NRPN data in the sequencer UMP converter as
well.
Link: https://patch.msgid.link/20240731130528.12600-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The UMP core conversion helper API already defines the context needed
to record the bank and RPN/NRPN values, and we can simply re-use the
same struct instead of re-defining the same content as a different
name.
Link: https://patch.msgid.link/20240731130528.12600-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
We had a nice name scheme in ALSA sequencer UMP binding for each
sequencer port referring to each assigned Function Block name, while
the legacy rawmidi refers only to the UMP Endpoint name. It's better
to align both.
This patch moves the UMP Group attribute update functions into the
core UMP code from the sequencer binding code, and improve the
substream name of the legacy rawmidi.
Link: https://patch.msgid.link/20240729141315.18253-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The current conversion from the legacy SysEx event to UMP SysEx packet
in the sequencer core has a couple of issues:
* The first packet trims the SysEx start byte (0xf0), hence it
contains only 5 bytes instead of 6. This isn't wrong, per
specification, but it's strange not to fill 6 bytes.
* When the SysEx end marker (0xf7) is placed at the first byte of the
next packet, it'll end up with an empty data just with the END
status. It can be rather folded into the previous packet with the
END status.
This patch tries to address those issues. The first packet may have 6
bytes even with the SysEx start, and an empty packet with the SysEx
end marker is omitted.
Fixes: e9e02819a98a ("ALSA: seq: Automatic conversion of UMP events")
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240726143455.3254-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When the UMP Endpoint is configured with static blocks, the block
configuration will never change, hence the unused ports will be
unchanged as well. Creating sequencer ports for those unused ports
is simply useless, and it might be rather confusing for users.
The idea behind the inactive ports was for allowing connections
from/to ports that can become usable later, but this will never
happen for inactive groups in static blocks.
Let's change the sequencer UMP binding to skip those unused ports when
the UMP EP is with static blocks.
Fixes: 81fd444aa371 ("ALSA: seq: Bind UMP device")
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240717083322.25892-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
MIDI2 Set Tempo message defines the tempo in 10ns unit for finer
accuracy, while MIDI1 was defined in 1us unit. For adapting this
different unit, introduce "tempo_base" field to snd_seq_queue_tempo
struct so that user-space can pass the proper tempo base unit.
The accepted value is limited, it must be either 0, 10 or 1000.
The protocol version is bumped to 1.0.4 along with this.
The access with the older protocol version ignores the tempo-base
value in ioctls and always treats as 1000.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://patch.msgid.link/20240705160344.6481-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The conversion of SPP to MIDI2 UMP called a wrong function, and the
secondary argument wasn't taken. As a result, MSB of SPP was always
zero. Fix to call the right function.
Fixes: e9e02819a98a ("ALSA: seq: Automatic conversion of UMP events")
Link: https://patch.msgid.link/20240626145141.16648-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The conversion from the legacy event to MIDI2 UMP for RPN and NRPN
missed the setup of the channel number, resulting in always the
channel 0. Fix it.
Fixes: e9e02819a98a ("ALSA: seq: Automatic conversion of UMP events")
Link: https://patch.msgid.link/20240625095200.25745-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The conversion from System Reset event to UMP was missing.
Add the entry for a conversion to a proper UMP System message.
Fixes: e9e02819a98a ("ALSA: seq: Automatic conversion of UMP events")
Link: https://lore.kernel.org/r/20240531123718.13420-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
At converting between the legacy event and UMP, the parameters for
MIDI Song Position Pointer are incorrectly stored. It should have
been LSB -> MSB order while it stored in MSB -> LSB order.
This patch corrects the ordering.
Fixes: e9e02819a98a ("ALSA: seq: Automatic conversion of UMP events")
Link: https://lore.kernel.org/r/20240531075110.3250-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
We fixed the incorrect UMP type for system messages in the recent
commit, but it missed one place in system_ev_to_ump_midi1().
Fix it now.
Fixes: e9e02819a98a ("ALSA: seq: Automatic conversion of UMP events")
Fixes: c2bb79613fed ("ALSA: seq: Fix incorrect UMP type for system messages")
Link: https://lore.kernel.org/r/20240530101044.17524-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When converting a legacy system message to a UMP packet, it forgot to
modify the UMP type field but keeping the default type (either type 2
or 4). Correct to the right type for system messages.
Fixes: e9e02819a98a ("ALSA: seq: Automatic conversion of UMP events")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240529083800.5742-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The current code to convert from a legacy sequencer event to UMP MIDI2
clears the bank selection at each time the program change is
submitted. This is confusing and may lead to incorrect bank values
tranmitted to the destination in the end.
Drop the line to clear the bank info and keep the provided values.
Fixes: e9e02819a98a ("ALSA: seq: Automatic conversion of UMP events")
Link: https://lore.kernel.org/r/20240527151852.29036-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When a UMP packet is converted between MIDI1 and MIDI2 protocols, the
bank selection may be lost. The conversion from MIDI1 to MIDI2 needs
the encoding of the bank into UMP_MSG_STATUS_PROGRAM bits, while the
conversion from MIDI2 to MIDI1 needs the extraction from that
instead.
This patch implements the missing bank selection mechanism in those
conversions.
Fixes: e9e02819a98a ("ALSA: seq: Automatic conversion of UMP events")
Link: https://lore.kernel.org/r/20240527151852.29036-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20240507135513.14919-2-tiwai@suse.de
|
|
Pull emu10k1 fixes from Oswald Buddenhagen
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Although the purpose of dummy seq client is a direct pass-through,
it's sometimes helpful for debugging if it can convert to a certain
UMP MIDI version. This patch adds an option to specify the UMP event
conversion. As default, it skips the conversion and does
passthrough, while user can pass ump=1 or ump=2 to enforce the
conversion to UMP MIDI1 or MIDI2 format.
Message-ID: <20240419101105.15571-1-tiwai@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The conversion from MIDI2 to MIDI1 UMP messages had a leftover
artifact (superfluous bit shift), and this resulted in the bogus type
check, leading to empty outputs. Let's fix it.
Fixes: e9e02819a98a ("ALSA: seq: Automatic conversion of UMP events")
Cc: <stable@vger.kernel.org>
Link: https://github.com/alsa-project/alsa-utils/issues/262
Message-ID: <20240419100442.14806-1-tiwai@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
