| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Namhyung Kim:
"perf record:
- Introduce latency profiling using scheduler information.
The latency profiling is to show impacts on wall-time rather than
cpu-time. By tracking context switches, it can weight samples and
find which part of the code contributed more to the execution
latency.
The value (period) of the sample is weighted by dividing it by the
number of parallel execution at the moment. The parallelism is
tracked in perf report with sched-switch records. This will reduce
the portion that are run in parallel and in turn increase the
portion of serial executions.
For now, it's limited to profile processes, IOW system-wide
profiling is not supported. You can add --latency option to enable
this.
$ perf record --latency -- make -C tools/perf
I've run the above command for perf build which adds -j option to
make with the number of CPUs in the system internally. Normally
it'd show something like below:
$ perf report -F overhead,comm
...
#
# Overhead Command
# ........ ...............
#
78.97% cc1
6.54% python3
4.21% shellcheck
3.28% ld
1.80% as
1.37% cc1plus
0.80% sh
0.62% clang
0.56% gcc
0.44% perl
0.39% make
...
The cc1 takes around 80% of the overhead as it's the actual
compiler. However it runs in parallel so its contribution to
latency may be less than that. Now, perf report will show both
overhead and latency (if --latency was given at record time) like
below:
$ perf report -s comm
...
#
# Overhead Latency Command
# ........ ........ ...............
#
78.97% 48.66% cc1
6.54% 25.68% python3
4.21% 0.39% shellcheck
3.28% 13.70% ld
1.80% 2.56% as
1.37% 3.08% cc1plus
0.80% 0.98% sh
0.62% 0.61% clang
0.56% 0.33% gcc
0.44% 1.71% perl
0.39% 0.83% make
...
You can see latency of cc1 goes down to around 50% and python3 and
ld contribute a lot more than their overhead. You can use --latency
option in perf report to get the same result but ordered by
latency.
$ perf report --latency -s comm
perf report:
- As a side effect of the latency profiling work, it adds a new
output field 'latency' and a sort key 'parallelism'. The below is a
result from my system with 64 CPUs. The build was well-parallelized
but contained some serial portions.
$ perf report -s parallelism
...
#
# Overhead Latency Parallelism
# ........ ........ ...........
#
16.95% 1.54% 62
13.38% 1.24% 61
12.50% 70.47% 1
11.81% 1.06% 63
7.59% 0.71% 60
4.33% 12.20% 2
3.41% 0.33% 59
2.05% 0.18% 64
1.75% 1.09% 9
1.64% 1.85% 5
...
- Support Feodra mini-debuginfo which is a LZMA compressed symbol
table inside ".gnu_debugdata" ELF section.
perf annotate:
- Add --code-with-type option to enable data-type profiling with the
usual annotate output.
Instead of focusing on data structure, it shows code annotation
together with data type it accesses in case the instruction refers
to a memory location (and it was able to resolve the target data
type). Currently it only works with --stdio.
$ perf annotate --stdio --code-with-type
...
Percent | Source code & Disassembly of vmlinux for cpu/mem-loads,ldlat=30/pp (18 samples, percent: local period)
----------------------------------------------------------------------------------------------------------------------
: 0 0xffffffff81050610 <__fdget>:
0.00 : ffffffff81050610: callq 0xffffffff81c01b80 <__fentry__> # data-type: (stack operation)
0.00 : ffffffff81050615: pushq %rbp # data-type: (stack operation)
0.00 : ffffffff81050616: movq %rsp, %rbp
0.00 : ffffffff81050619: pushq %r15 # data-type: (stack operation)
0.00 : ffffffff8105061b: pushq %r14 # data-type: (stack operation)
0.00 : ffffffff8105061d: pushq %rbx # data-type: (stack operation)
0.00 : ffffffff8105061e: subq $0x10, %rsp
0.00 : ffffffff81050622: movl %edi, %ebx
0.00 : ffffffff81050624: movq %gs:0x7efc4814(%rip), %rax # 0x14e40 <current_task> # data-type: struct task_struct* +0
0.00 : ffffffff8105062c: movq 0x8d0(%rax), %r14 # data-type: struct task_struct +0x8d0 (files)
0.00 : ffffffff81050633: movl (%r14), %eax # data-type: struct files_struct +0 (count.counter)
0.00 : ffffffff81050636: cmpl $0x1, %eax
0.00 : ffffffff81050639: je 0xffffffff810506a9 <__fdget+0x99>
0.00 : ffffffff8105063b: movq 0x20(%r14), %rcx # data-type: struct files_struct +0x20 (fdt)
0.00 : ffffffff8105063f: movl (%rcx), %eax # data-type: struct fdtable +0 (max_fds)
0.00 : ffffffff81050641: cmpl %ebx, %eax
0.00 : ffffffff81050643: jbe 0xffffffff810506ef <__fdget+0xdf>
0.00 : ffffffff81050649: movl %ebx, %r15d
5.56 : ffffffff8105064c: movq 0x8(%rcx), %rdx # data-type: struct fdtable +0x8 (fd)
...
The "# data-type:" part was added with this change. The first few
entries are not very interesting. But later you can it accesses a
couple of fields in the task_struct, files_struct and fdtable.
perf trace:
- Support syscall tracing for different ABI. For example it can trace
system calls for 32-bit applications on 64-bit kernel
transparently.
- Add --summary-mode=total option to show global syscall summary. The
default is 'thread' to show per-thread syscall summary.
Python support:
- Add more interfaces to 'perf' module to parse events, and config,
enable or disable the event list properly so that it can implement
basic functionalities purely in Python. There is an example code
for these new interfaces in python/tracepoint.py.
- Add mypy and pylint support to enable build time checking. Fix some
code based on the findings from these tools.
Internals:
- Introduce io_dir__readdir() API to make directory traveral (usually
for proc or sysfs) efficient with less memory footprint.
JSON vendor events:
- Add events and metrics for ARM Neoverse N3 and V3
- Update events and metrics on various Intel CPUs
- Add/update events for a number of SiFive processors"
* tag 'perf-tools-for-v6.15-2025-03-27' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (229 commits)
perf bpf-filter: Fix a parsing error with comma
perf report: Fix a memory leak for perf_env on AMD
perf trace: Fix wrong size to bpf_map__update_elem call
perf tools: annotate asm_pure_loop.S
perf python: Fix setup.py mypy errors
perf test: Address attr.py mypy error
perf build: Add pylint build tests
perf build: Add mypy build tests
perf build: Rename TEST_LOGS to SHELL_TEST_LOGS
tools/build: Don't pass test log files to linker
perf bench sched pipe: fix enforced blocking reads in worker_thread
perf tools: Fix is_compat_mode build break in ppc64
perf build: filter all combinations of -flto for libperl
perf vendor events arm64 AmpereOneX: Fix frontend_bound calculation
perf vendor events arm64: AmpereOne/AmpereOneX: Mark LD_RETIRED impacted by errata
perf trace: Fix evlist memory leak
perf trace: Fix BTF memory leak
perf trace: Make syscall table stable
perf syscalltbl: Mask off ABI type for MIPS system calls
perf build: Remove Makefile.syscalls
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing tooling updates from Steven Rostedt:
- Allow RTLA to collect data via BPF
The current implementation of rtla uses libtracefs and libtraceevent
to pull sample events generated by the timerlat tracer from the trace
buffer. rtla then processes the sample by updating the histogram and
summary (current, maximum, minimum, and sum values) as well as checks
if tracing has been stopped due to threshold overflow.
In use cases where a large number of samples is being generated, that
is, with measurements running on many CPUs and with a low interval,
this sample processing design causes a significant CPU load on the
rtla side. Furthermore, with >100 CPUs and 100us interval, rtla was
reported as not being able to keep up with the samples and dropping
most of them, leading to it being unusable.
Change the way the timerlat trace processes samples by attaching a
BPF program to the trace event using the BPF skeleton feature of
bpftool. Unlike the current implementation, the BPF implementation
does not check whether tracing is stopped (in BPF mode, tracing is
always off to improve performance), but waits for a write to a BPF
ringbuffer instead. This allows rtla to exit immediately when a
threshold is violated, without waiting for the next iteration of the
while loop.
If the requirements for the BPF implementation are not met, either at
build time or at run time, the current implementation is used as
fallback. Which implementation is being used can be seen when running
rtla timerlat with "-D" option. rtla can be forced to run in non-BPF
mode by setting the RTLA_NO_BPF option to 1, for debugging purposes.
- Fix LD_FLAGS from being dropped in build
- Refactor code to remove duplication of save_trace_to_file
- Always set options and do not rely on default settings
Do not rely on the default kernel settings of the tracers when
starting. They could have been changed by the user which gives
inconsistent results. Always set the options that rtla expects.
- Add creation of ctags and TAGS for traversing code
* tag 'trace-tools-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rtla: Add the ability to create ctags and etags
rtla/tests: Test setting default options
rtla/tests: Reset osnoise options before check
rtla: Always set all tracer options
rtla/osnoise: Set OSNOISE_WORKLOAD to true
rtla: Unify apply_config between top and hist
rtla/osnoise: Unify params struct
rtla: Fix segfault in save_trace_to_file call
tools/build: Use SYSTEM_BPFTOOL for system bpftool
rtla: Refactor save_trace_to_file
tools/rv: Keep user LDFLAGS in build
rtla/timerlat: Test BPF mode
rtla/timerlat_top: Use BPF to collect samples
rtla/timerlat_top: Move divisor to update
rtla/timerlat_hist: Use BPF to collect samples
rtla/timerlat: Add BPF skeleton to collect samples
rtla: Add optional dependency on BPF tooling
tools/build: Add bpftool-skeletons feature test
rtla/timerlat: Unify params struct
|
|
The feature test for system bpftool uses BPFTOOL as the variable to set
its path, defaulting to just "bpftool" if not set by the user.
This conflicts with selftests and a few other utilities, which expect
BPFTOOL to be set to the in-tree bpftool path by default. For example,
bpftool selftests fail to build:
$ make -C tools/testing/selftests/bpf/
make: Entering directory '/home/tglozar/dev/linux/tools/testing/selftests/bpf'
make: *** No rule to make target 'bpftool', needed by '/home/tglozar/dev/linux/tools/testing/selftests/bpf/tools/include/vmlinux.h'. Stop.
make: Leaving directory '/home/tglozar/dev/linux/tools/testing/selftests/bpf'
Fix the problem by renaming the variable used for system bpftool from
BPFTOOL to SYSTEM_BPFTOOL, so that the new usage does not conflict with
the existing one of BPFTOOL.
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Link: https://lore.kernel.org/20250326004018.248357-1-tglozar@redhat.com
Fixes: 8a635c3856dd ("tools/build: Add bpftool-skeletons feature test")
Closes: https://lore.kernel.org/linux-kernel/5df6968a-2e5f-468e-b457-fc201535dd4c@linux.ibm.com/
Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Suggested-by: Quentin Monnet <qmo@kernel.org>
Acked-by: Quentin Monnet <qmo@kernel.org>
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Separate test log files from object files. Depend on test log output
but don't pass to the linker.
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250311213628.569562-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add bpftool-skeletons feature test, testing the presence of a bpftool
capable of generating skeletons.
This is to be used for tools that do not require building their own
bootstrap bpftool from the kernel source tree.
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Link: https://lore.kernel.org/20250218145859.27762-3-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Commit f2868b1a66d4f40f ("perf tools: Expose quiet/verbose variables in
Makefile.perf") moved the quiet infrastructure out of
tools/build/Makefile.build and into the top-level Makefile.perf file so
that the quiet infrastructure could be used throughout perf and not just
in Makefile.build.
Extract out the quiet infrastructure into Makefile.include so that it
can be leveraged outside of perf.
Fixes: f2868b1a66d4f40f ("perf tools: Expose quiet/verbose variables in Makefile.perf")
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Benjamin Tissoires <bentiss@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Lukasz Luba <lukasz.luba@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Mykola Lysenko <mykolal@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <qmo@kernel.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20250213-quiet_tools-v3-1-07de4482a581@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
There's some expressed interest in having the compiler flag
-Wconversion detect at build time certain kinds of potential problems:
https://lore.kernel.org/lkml/20250103182532.GB781381@e132581.arm.com/
As feature detection passes -Wconversion from CFLAGS when set, the
feature detection compile tests need to not fail because of
-Wconversion as the failure will be interpretted as a missing
feature. Switch various types to avoid the -Wconversion issue, the
exact meaning of the code is unimportant as it is typically looking
for header file definitions.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250106215443.198633-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The variables to make builds silent/verbose live inside
tools/build/Makefile.build. Move those variables to the top-level
Makefile.perf to be generally available.
Committer testing:
See the SYSCALL lines, now they are consistent with the other
operations in other lines:
SYSTBL /tmp/build/perf-tools-next/arch/x86/include/generated/asm/syscalls_32.h
SYSTBL /tmp/build/perf-tools-next/arch/x86/include/generated/asm/syscalls_64.h
GEN /tmp/build/perf-tools-next/common-cmds.h
GEN /tmp/build/perf-tools-next/arch/arm64/include/generated/asm/sysreg-defs.h
PERF_VERSION = 6.13.rc2.g3d94bb6ed1d0
GEN perf-archive
MKDIR /tmp/build/perf-tools-next/jvmti/
MKDIR /tmp/build/perf-tools-next/jvmti/
MKDIR /tmp/build/perf-tools-next/jvmti/
MKDIR /tmp/build/perf-tools-next/jvmti/
GEN perf-iostat
CC /tmp/build/perf-tools-next/jvmti/libjvmti.o
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20250114-perf_make_test-v1-1-decc1c517b11@rivosinc.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
All architectures now support HAVE_SYSCALL_TABLE_SUPPORT, so the flag is
no longer needed. With the removal of the flag, the related
GENERIC_SYSCALL_TABLE can also be removed.
libaudit was only used as a fallback for when HAVE_SYSCALL_TABLE_SUPPORT
was not defined, so libaudit is also no longer needed for any
architecture.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-16-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently each architecture in perf independently generates syscall
headers.
Adapt the work that has gone into unifying syscall header
implementations in the kernel to work with perf tools.
Introduce this framework with riscv at first. riscv previously relied on
libaudit, but with this change, perf tools for riscv no longer needs
this external dependency.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-1-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The macro ELFCOMPRESS_ZSTD defines the compress algorithm, which was
introduced in the commit ("libelf: Document and make ELFCOMPRESS_ZSTD
usable with old system elf.h") of the repository elfutils-0.188-67.
Therefore, libelf 0.189 and later versions require to link the libzstd
library.
Add a test for checking if libelf supports ZSTD algorithm. Pass the
macro ELFCOMPRESS_ZSTD as an argument to the elf_compress() function.
If the build succeeds, it means the feature is supported.
Reviewed-by: Quentin Monnet <qmo@kernel.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Quentin Monnet <qmo@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Guilherme Amadio <amadio@gentoo.org>
Cc: Hao Luo <haoluo@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Song Liu <song@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20241215221223.293205-2-leo.yan@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Since these are so far considered part of the basic set of libraries to
be present when building perf, have then in
tools/build/features/test-all.c.
They were already in the FEATURE_TESTS_BASIC variable of
tools/build/Makefile.feature, meaning if test-all.c builds, those
features would be set as present, but then we were calling "again"
(well, they were not in test-all.c, so were not really being tested) for
it to be detected, fix this all up by not calling feature_check for
those features but instead have them in test-all.c to be tested together
with the the set of basic expected libraries.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/20241213195052.914914-3-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
test-all.c builds
As it is not really included in tools/build/feature/test-all.c, so any
questioning about this feature should really try to build
tools/build/feature/test-libslang-include-subdir.c and not set it as
detected when test-all.c builds.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/20241213195052.914914-2-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
libcap isn't tested in the tools/build/feature/test-all.c fast path
feature detection process, so don't set it as available if test-all
manages to build.
There are other users of this feature detection mechanism, and they
explicitely ask for libcap to be tested, so are not affected by this
patch, for instance, with this patch in place:
$ make -C tools/bpf/bpftool/ clean
<SNIP>
make: Leaving directory '/home/acme/git/perf-tools-next/tools/bpf/bpftool'
⬢ [acme@toolbox perf-tools-next]$ make -C tools/bpf/bpftool/
make: Entering directory '/home/acme/git/perf-tools-next/tools/bpf/bpftool'
Auto-detecting system features:
... clang-bpf-co-re: [ on ]
... llvm: [ on ]
... libcap: [ on ]
... libbfd: [ on ]
... libelf-zstd: [ on ]
<SNIP>
LINK bpftool
make: Leaving directory '/home/acme/git/perf-tools-next/tools/bpf/bpftool'
$
$ sudo rpm -e libcap-devel
$ make -C tools/bpf/bpftool/
<SNIP>
make: Entering directory '/home/acme/git/perf-tools-next/tools/bpf/bpftool'
Auto-detecting system features:
... clang-bpf-co-re: [ on ]
... llvm: [ on ]
... libcap: [ OFF ]
... libbfd: [ on ]
... libelf-zstd: [ on ]
$
Reviewed-by: Ian Rogers <irogers@google.com>
Acked-by: Quentin Monnet <qmo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/20241211224509.797827-3-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The tools/build/feature/test-all.c works in conjunction with the
tools/build/Makefile.feature FEATURE_TESTS_BASIC and FEATURE_TESTS_EXTRA
contents, so that if test-all.c manages to be built, we go on and
iterate all entries in FEATURE_TESTS_BASIC + FEATURE_TESTS_EXTRA setting
them to 1.
To test this:
$ rm -rf /tmp/b ; mkdir /tmp/b ; make -C tools/perf O=/tmp/b feature-dump
$ cat /tmp/b/feature/test-all.make.output
$ ldd /tmp/b/feature/test-all.bin
linux-vdso.so.1 (0x00007f2a47a67000)
libdw.so.1 => /lib64/libdw.so.1 (0x00007f2a477cf000)
libpython3.12.so.1.0 => /lib64/libpython3.12.so.1.0 (0x00007f2a471fe000)
libm.so.6 => /lib64/libm.so.6 (0x00007f2a4711a000)
libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f2a470f2000)
libtracefs.so.1 => /lib64/libtracefs.so.1 (0x00007f2a470cb000)
libcrypto.so.3 => /lib64/libcrypto.so.3 (0x00007f2a46c1b000)
libz.so.1 => /lib64/libz.so.1 (0x00007f2a46bf8000)
libbabeltrace-ctf.so.1 => /lib64/libbabeltrace-ctf.so.1 (0x00007f2a46bad000)
libcapstone.so.5 => /lib64/libcapstone.so.5 (0x00007f2a464b8000)
libopencsd_c_api.so.1 => /lib64/libopencsd_c_api.so.1 (0x00007f2a464a8000)
libopencsd.so.1 => /lib64/libopencsd.so.1 (0x00007f2a46422000)
libelf.so.1 => /lib64/libelf.so.1 (0x00007f2a46406000)
libnuma.so.1 => /lib64/libnuma.so.1 (0x00007f2a463f6000)
libslang.so.2 => /lib64/libslang.so.2 (0x00007f2a46113000)
libperl.so.5.38 => /lib64/libperl.so.5.38 (0x00007f2a45d74000)
libc.so.6 => /lib64/libc.so.6 (0x00007f2a45b83000)
liblzma.so.5 => /lib64/liblzma.so.5 (0x00007f2a45b50000)
libzstd.so.1 => /lib64/libzstd.so.1 (0x00007f2a45a91000)
libbz2.so.1 => /lib64/libbz2.so.1 (0x00007f2a45a7b000)
/lib64/ld-linux-x86-64.so.2 (0x00007f2a47a69000)
libbabeltrace.so.1 => /lib64/libbabeltrace.so.1 (0x00007f2a45a6b000)
libpopt.so.0 => /lib64/libpopt.so.0 (0x00007f2a45a5b000)
libuuid.so.1 => /lib64/libuuid.so.1 (0x00007f2a45a51000)
libgmodule-2.0.so.0 => /lib64/libgmodule-2.0.so.0 (0x00007f2a45a4a000)
libglib-2.0.so.0 => /lib64/libglib-2.0.so.0 (0x00007f2a458fa000)
libstdc++.so.6 => /lib64/libstdc++.so.6 (0x00007f2a45696000)
libgcc_s.so.1 => /lib64/libgcc_s.so.1 (0x00007f2a45668000)
libcrypt.so.2 => /lib64/libcrypt.so.2 (0x00007f2a45630000)
libpcre2-8.so.0 => /lib64/libpcre2-8.so.0 (0x00007f2a45590000)
$ head /tmp/b/FEATURE-DUMP
feature-backtrace=1
feature-libdw=1
feature-eventfd=1
feature-fortify-source=1
feature-get_current_dir_name=1
feature-gettid=1
feature-glibc=1
feature-libbfd=1
feature-libbfd-buildid=1
feature-libcap=1
$
There are inconsistencies that are being audited, as can be seen above
with the libcap case, that is not linked with test-all.bin nor is
present in test-all.c, so shouldn't be set as present. Further patches
are going to address those inconsistencies, but lets document this a bit
more to reduce the chances of this happening again.
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/20241211224509.797827-2-acme@kernel.org
[ Fixed typo pointed out by Ian Rogers ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
test-all.o builds
We have a tools/build/feature/test-all.c that has the most common set of
features that perf uses and are expected to have its development files
available when building perf.
When we made libwunwind opt-in we forgot to remove them from the list of
features that are assumed to be available when test-all.c builds, remove
them.
Before this patch:
$ rm -rf /tmp/b ; mkdir /tmp/b ; make -C tools/perf O=/tmp/b feature-dump ; grep feature-libunwind-aarch64= /tmp/b/FEATURE-DUMP
feature-libunwind-aarch64=1
$
Even tho this not being test built and those header files being
available:
$ head -5 tools/build/feature/test-libunwind-aarch64.c
// SPDX-License-Identifier: GPL-2.0
#include <libunwind-aarch64.h>
#include <stdlib.h>
extern int UNW_OBJ(dwarf_search_unwind_table) (unw_addr_space_t as,
$
After this patch:
$ grep feature-libunwind- /tmp/b/FEATURE-DUMP
$
Now an audit on what is being enabled when test-all.c builds will be
performed.
Fixes: 176c9d1e6a06f2fa ("tools features: Don't check for libunwind devel files by default")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Since 13e17c9ff49119aa ("perf build: Make libunwind opt-in rather than
opt-out"), so we shouldn't by default be testing for its availability at
build time in tools/build/features/test-all.c.
That test was designed to test the features we expect to be the most
common ones in most builds, so if we test build just that file, then we
assume the features there are present and will not test one by one.
Removing it from test-all.c gets rid of the first impediment for
test-all.c to build successfully:
$ cat /tmp/build/perf-tools-next/feature/test-all.make.output
In file included from test-all.c:62:
test-libunwind.c:2:10: fatal error: libunwind.h: No such file or directory
2 | #include <libunwind.h>
| ^~~~~~~~~~~~~
compilation terminated.
$
We then get to:
$ cat /tmp/build/perf-tools-next/feature/test-all.make.output
/usr/bin/ld: cannot find -lunwind-x86_64: No such file or directory
/usr/bin/ld: cannot find -lunwind: No such file or directory
collect2: error: ld returned 1 exit status
$
So make all the logic related to setting CFLAGS, LDFLAGS, etc for
libunwind to be conditional on NO_LIBWUNWIND=1, which is now the
default, now we get a faster build:
$ cat /tmp/build/perf-tools-next/feature/test-all.make.output
$ ldd /tmp/build/perf-tools-next/feature/test-all.bin
linux-vdso.so.1 (0x00007fef04cde000)
libdw.so.1 => /lib64/libdw.so.1 (0x00007fef04a49000)
libpython3.12.so.1.0 => /lib64/libpython3.12.so.1.0 (0x00007fef04478000)
libm.so.6 => /lib64/libm.so.6 (0x00007fef04394000)
libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007fef0436c000)
libtracefs.so.1 => /lib64/libtracefs.so.1 (0x00007fef04345000)
libcrypto.so.3 => /lib64/libcrypto.so.3 (0x00007fef03e95000)
libz.so.1 => /lib64/libz.so.1 (0x00007fef03e72000)
libelf.so.1 => /lib64/libelf.so.1 (0x00007fef03e56000)
libnuma.so.1 => /lib64/libnuma.so.1 (0x00007fef03e48000)
libslang.so.2 => /lib64/libslang.so.2 (0x00007fef03b65000)
libperl.so.5.38 => /lib64/libperl.so.5.38 (0x00007fef037c6000)
libc.so.6 => /lib64/libc.so.6 (0x00007fef035d5000)
liblzma.so.5 => /lib64/liblzma.so.5 (0x00007fef035a0000)
libzstd.so.1 => /lib64/libzstd.so.1 (0x00007fef034e1000)
libbz2.so.1 => /lib64/libbz2.so.1 (0x00007fef034cd000)
/lib64/ld-linux-x86-64.so.2 (0x00007fef04ce0000)
libcrypt.so.2 => /lib64/libcrypt.so.2 (0x00007fef03495000)
$
Fixes: 13e17c9ff49119aa ("perf build: Make libunwind opt-in rather than opt-out")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/Z09zTztD8X8qIWCX@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Namhyung Kim:
"perf record:
- Enable leader sampling for inherited task events. It was supported
only for system-wide events but the kernel started to support such
a setup since v6.12.
This is to reduce the number of PMU interrupts. The samples of the
leader event will contain counts of other events and no samples
will be generated for the other member events.
$ perf record -e '{cycles,instructions}:S' ${MYPROG}
perf report:
- Fix --branch-history option to display more branch-related
information like prediction, abort and cycles which is available
on Intel machines.
$ perf record -bg -- perf test -w brstack
$ perf report --branch-history
...
#
# Overhead Source:Line Symbol Shared Object Predicted Abort Cycles IPC [IPC Coverage]
# ........ ........................ .............. .................... ......... ..... ...... ....................
#
8.17% copy_page_64.S:19 [k] copy_page [kernel.kallsyms] 50.0% 0 5 - -
|
---xas_load xarray.h:171
|
|--5.68%--xas_load xarray.c:245 (cycles:1)
| xas_load xarray.c:242
| xas_load xarray.h:1260 (cycles:1)
| xas_descend xarray.c:146
| xas_load xarray.c:244 (cycles:2)
| xas_load xarray.c:245
| xas_descend xarray.c:218 (cycles:10)
...
perf stat:
- Add HWMON PMU support.
The HWMON provides various system information like CPU/GPU
temperature, fan speed and so on. Expose them as PMU events so that
users can see the values using perf stat commands.
$ perf stat -e temp_cpu,fan1 true
Performance counter stats for 'true':
60.00 'C temp_cpu
0 rpm fan1
0.000745382 seconds time elapsed
0.000883000 seconds user
0.000000000 seconds sys
- Display metric threshold in JSON output.
Some metrics define thresholds to classify value ranges. It used to
be in a different color but it won't work for JSON.
Add "metric-threshold" field to the JSON that can be one of "good",
"less good", "nearly bad" and "bad".
# perf stat -a -M TopdownL1 -j true
{"counter-value" : "18693525.000000", "unit" : "", "event" : "TOPDOWN.SLOTS", "event-runtime" : 5552708, "pcnt-running" : 100.00, "metric-value" : "43.226002", "metric-unit" : "% tma_backend_bound", "metric-threshold" : "bad"}
{"metric-value" : "29.212267", "metric-unit" : "% tma_frontend_bound", "metric-threshold" : "bad"}
{"metric-value" : "7.138972", "metric-unit" : "% tma_bad_speculation", "metric-threshold" : "good"}
{"metric-value" : "20.422759", "metric-unit" : "% tma_retiring", "metric-threshold" : "good"}
{"counter-value" : "3817732.000000", "unit" : "", "event" : "topdown-retiring", "event-runtime" : 5552708, "pcnt-running" : 100.00, }
{"counter-value" : "5472824.000000", "unit" : "", "event" : "topdown-fe-bound", "event-runtime" : 5552708, "pcnt-running" : 100.00, }
{"counter-value" : "7984780.000000", "unit" : "", "event" : "topdown-be-bound", "event-runtime" : 5552708, "pcnt-running" : 100.00, }
{"counter-value" : "1418181.000000", "unit" : "", "event" : "topdown-bad-spec", "event-runtime" : 5552708, "pcnt-running" : 100.00, }
...
perf sched:
- Add -P/--pre-migrations option for 'timehist' sub-command to track
time a task waited on a run-queue before migrating to a different
CPU.
$ perf sched timehist -P
time cpu task name wait time sch delay run time pre-mig time
[tid/pid] (msec) (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- --------- ---------
585940.535527 [0000] perf[584885] 0.000 0.000 0.000 0.000
585940.535535 [0000] migration/0[20] 0.000 0.002 0.008 0.000
585940.535559 [0001] perf[584885] 0.000 0.000 0.000 0.000
585940.535563 [0001] migration/1[25] 0.000 0.001 0.004 0.000
585940.535678 [0002] perf[584885] 0.000 0.000 0.000 0.000
585940.535686 [0002] migration/2[31] 0.000 0.002 0.008 0.000
585940.535905 [0001] <idle> 0.000 0.000 0.342 0.000
585940.535938 [0003] perf[584885] 0.000 0.000 0.000 0.000
585940.537048 [0001] sleep[584886] 0.000 0.019 1.142 0.001
585940.537749 [0002] <idle> 0.000 0.000 2.062 0.000
...
Build:
- Make libunwind opt-in (LIBUNWIND=1) rather than opt-out.
The perf tools are generally built with libelf and libdw which has
unwinder functionality. The libunwind support predates it and no
need to have duplicate unwinders by default.
- Rename NO_DWARF=1 build option to NO_LIBDW=1 in order to clarify
it's using libdw for handling DWARF information.
Internals:
- Do not set exclude_guest bit in the perf_event_attr by default.
This was causing a trouble in AMD IBS PMU as it doesn't support the
bit. The bit will be set when it's needed later by the fallback
logic. Also update the missing feature detection logic to make sure
not clear supported bits unnecessarily.
- Run perf test in parallel by default and mark flaky tests
"exclusive" to run them serially at the end. Some test numbers are
changed but the test can complete in less than half the time.
JSON vendor events:
- Add AMD Zen 5 events and metrics.
- Add i.MX91 and i.MX95 DDR metrics
- Fix HiSilicon HIP08 Topdown metric name.
- Support compat events on PowerPC"
* tag 'perf-tools-for-v6.13-2024-11-24' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (232 commits)
perf tests: Fix hwmon parsing with PMU name test
perf hwmon_pmu: Ensure hwmon key union is zeroed before use
perf tests hwmon_pmu: Remove double evlist__delete()
perf/test: fix perf ftrace test on s390
perf bpf-filter: Return -ENOMEM directly when pfi allocation fails
perf test: Correct hwmon test PMU detection
perf: Remove unused del_perf_probe_events()
perf pmu: Move pmu_metrics_table__find and remove ARM override
perf jevents: Add map_for_cpu()
perf header: Pass a perf_cpu rather than a PMU to get_cpuid_str
perf header: Avoid transitive PMU includes
perf arm64 header: Use cpu argument in get_cpuid
perf header: Refactor get_cpuid to take a CPU for ARM
perf header: Move is_cpu_online to numa bench
perf jevents: fix breakage when do perf stat on system metric
perf test: Add missing __exit calls in tool/hwmon tests
perf tests: Make leader sampling test work without branch event
perf util: Remove kernel version deadcode
perf test shell trace_exit_race: Use --no-comm to avoid cases where COMM isn't resolved
perf test shell trace_exit_race: Show what went wrong in verbose mode
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing tools updates from Steven Rostedt:
- Add ':' to getopt option 'trace-buffer-size' in timerlat_hist for
consistency
- Remove unused sched_getattr define
- Rename sched_setattr() helper to syscall_sched_setattr() to avoid
conflicts
- Update counters to long from int to avoid overflow
- Add libcpupower dependency detection
- Add --deepest-idle-state to timerlat to limit deep idle sleeps
- Other minor clean ups and documentation changes
* tag 'trace-tools-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
verification/dot2: Improve dot parser robustness
tools/rtla: Improve exception handling in timerlat_load.py
tools/rtla: Enhance argument parsing in timerlat_load.py
tools/rtla: Improve code readability in timerlat_load.py
rtla/timerlat: Do not set params->user_workload with -U
rtla: Documentation: Mention --deepest-idle-state
rtla/timerlat: Add --deepest-idle-state for hist
rtla/timerlat: Add --deepest-idle-state for top
rtla/utils: Add idle state disabling via libcpupower
rtla: Add optional dependency on libcpupower
tools/build: Add libcpupower dependency detection
rtla/timerlat: Make timerlat_hist_cpu->*_count unsigned long long
rtla/timerlat: Make timerlat_top_cpu->*_count unsigned long long
tools/rtla: fix collision with glibc sched_attr/sched_set_attr
tools/rtla: drop __NR_sched_getattr
rtla: Fix consistency in getopt_long for timerlat_hist
rv: Fix a typo
tools/rv: Correct the grammatical errors in the comments
tools/rv: Correct the grammatical errors in the comments
rtla: use the definition for stdout fd when calling isatty()
|
|
Currently the libtraceevent's found by pkg-config, which give the
include path as:
[root@localhost tmp]# pkg-config --cflags libtraceevent
-I/usr/local/include/traceevent
So we should include the libtraceevent headers directly without
"traceevent/" prefix. Update all the users.
Fixes: 0f0e1f445690 ("perf build: Use pkg-config for feature check for libtrace{event,fs}")
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/linux-perf-users/ZyF5_Hf1iL01kldE@google.com/
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Cc: leo.yan@arm.com
Cc: amadio@gentoo.org
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/20241105105649.45399-1-yangyicong@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The test _ELFUTILS_PREREQ(0, 142) is false for elfutils before
2009-06-13, but that is 15 years ago and very unlikely. Add a test to
test-libdw.c and assume the libdw version is at least 0.142 to
simplify the build logic.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Anup Patel <anup@brainfault.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Shenlin Liang <liangshenlin@eswincomputing.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Guilherme Amadio <amadio@gentoo.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Chen Pei <cp0613@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Aditya Gupta <adityag@linux.ibm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Atish Patra <atishp@rivosinc.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: linux-csky@vger.kernel.org
Link: https://lore.kernel.org/r/20241017001354.56973-9-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
dwarf_getcfi support in libdw is 15 years old. Make libdw imply
dwarf_getcfi support and simplify build logic.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Leo Yan <leo.yan@arm.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Shenlin Liang <liangshenlin@eswincomputing.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Guilherme Amadio <amadio@gentoo.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Chen Pei <cp0613@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Aditya Gupta <adityag@linux.ibm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Atish Patra <atishp@rivosinc.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: linux-csky@vger.kernel.org
Link: https://lore.kernel.org/r/20241017001354.56973-8-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
dwarf_getlocations support in libdw is more than 10 years old. Make
libdw imply dwarf_getlocations support and simplify build logic.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Leo Yan <leo.yan@arm.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Shenlin Liang <liangshenlin@eswincomputing.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Guilherme Amadio <amadio@gentoo.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Chen Pei <cp0613@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Aditya Gupta <adityag@linux.ibm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Atish Patra <atishp@rivosinc.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: linux-csky@vger.kernel.org
Link: https://lore.kernel.org/r/20241017001354.56973-7-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Support in libdw has been present for 10 years so let's simplify the
build logic with a single feature test.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Leo Yan <leo.yan@arm.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Shenlin Liang <liangshenlin@eswincomputing.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Guilherme Amadio <amadio@gentoo.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Chen Pei <cp0613@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Aditya Gupta <adityag@linux.ibm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Atish Patra <atishp@rivosinc.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: linux-csky@vger.kernel.org
Link: https://lore.kernel.org/r/20241017001354.56973-6-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Be more intention revealing that the dwarf test is actually testing
for libdw support.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Anup Patel <anup@brainfault.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Shenlin Liang <liangshenlin@eswincomputing.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Guilherme Amadio <amadio@gentoo.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Chen Pei <cp0613@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Aditya Gupta <adityag@linux.ibm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Atish Patra <atishp@rivosinc.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: linux-csky@vger.kernel.org
Link: https://lore.kernel.org/r/20241017001354.56973-5-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add the ability to detect the presence of libcpupower on a system to
the Makefiles in tools/build.
Link: https://lore.kernel.org/20241017140914.3200454-2-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
For libdw versions below 0.177, need to link libdl.a in addition to
libbebl.a during static compilation, otherwise
feature-dwarf_getlocations compilation will fail.
Before:
$ make LDFLAGS=-static
BUILD: Doing 'make -j20' parallel build
<SNIP>
Makefile.config:483: Old libdw.h, finding variables at given 'perf probe' point will not work, install elfutils-devel/libdw-dev >= 0.157
<SNIP>
$ cat ../build/feature/test-dwarf_getlocations.make.output
/usr/bin/ld: /usr/lib/gcc/x86_64-linux-gnu/9/../../../x86_64-linux-gnu/libebl.a(eblclosebackend.o): in function `ebl_closebackend':
(.text+0x20): undefined reference to `dlclose'
collect2: error: ld returned 1 exit status
After:
$ make LDFLAGS=-static
<SNIP>
Auto-detecting system features:
... dwarf: [ on ]
<SNIP>
$ ./perf probe
Usage: perf probe [<options>] 'PROBEDEF' ['PROBEDEF' ...]
or: perf probe [<options>] --add 'PROBEDEF' [--add 'PROBEDEF' ...]
or: perf probe [<options>] --del '[GROUP:]EVENT' ...
or: perf probe --list [GROUP:]EVENT ...
<SNIP>
Fixes: 536661da6ea18fe6 ("perf: build: Only link libebl.a for old libdw")
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240919013513.118527-3-yangjihong@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
If libdw is not installed in build environment, the output of
'pkg-config --modversion libdw' is empty, causing LIBDW_VERSION_2 to be
empty and the shell test will have the following error:
/bin/sh: 1: test: -lt: unexpected operator
Before:
$ pkg-config --modversion libdw
Package libdw was not found in the pkg-config search path.
Perhaps you should add the directory containing `libdw.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libdw' found
$ make LDFLAGS=-static -j16
BUILD: Doing 'make -j20' parallel build
<SNIP>
Package libdw was not found in the pkg-config search path.
Perhaps you should add the directory containing `libdw.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libdw' found
/bin/sh: 1: test: -lt: unexpected operator
After:
1. libdw is not installed:
$ pkg-config --modversion libdw
Package libdw was not found in the pkg-config search path.
Perhaps you should add the directory containing `libdw.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libdw' found
$ make LDFLAGS=-static -j16
BUILD: Doing 'make -j20' parallel build
<SNIP>
Package libdw was not found in the pkg-config search path.
Perhaps you should add the directory containing `libdw.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libdw' found
Makefile.config:473: No libdw DWARF unwind found, Please install elfutils-devel/libdw-dev >= 0.158 and/or set LIBDW_DIR
2. libdw version is lower than 0.177
$ pkg-config --modversion libdw
0.176
$ make LDFLAGS=-static -j16
BUILD: Doing 'make -j20' parallel build
<SNIP>
Auto-detecting system features:
... dwarf: [ on ]
<SNIP>
INSTALL libsubcmd_headers
INSTALL libapi_headers
INSTALL libperf_headers
INSTALL libsymbol_headers
INSTALL libbpf_headers
LINK perf
3. libdw version is higher than 0.177
$ pkg-config --modversion libdw
0.186
$ make LDFLAGS=-static -j16
BUILD: Doing 'make -j20' parallel build
<SNIP>
Auto-detecting system features:
... dwarf: [ on ]
<SNIP>
CC util/bpf-utils.o
CC util/pfm.o
LD util/perf-util-in.o
LD perf-util-in.o
AR libperf-util.a
LINK perf
Fixes: 536661da6ea18fe6 ("perf: build: Only link libebl.a for old libdw")
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240919013513.118527-2-yangjihong@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
llvm-version was removed in commit 56b11a2126bf ("perf bpf: Remove
support for embedding clang for compiling BPF events (-e foo.c)") but
some parts were left in the Makefile so finish removing them.
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Daniel Wagner <dwagner@suse.de>
Cc: Guilherme Amadio <amadio@gentoo.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Manu Bretelle <chantr4@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <qmo@kernel.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Link: https://lore.kernel.org/r/20240910140405.568791-2-james.clark@linaro.org
[ Removed one leftover, 'llvm-version' from FEATURE_TESTS_EXTRA ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The new LLVM addr2line feature requires a minimum version of 13 to
compile. Add a feature check for the version so that NO_LLVM=1 doesn't
need to be explicitly added. Leave the existing llvm feature check
intact because it's used by tools other than Perf.
This fixes the following compilation error when the llvm-dev version
doesn't match:
util/llvm-c-helpers.cpp: In function 'char* llvm_name_for_code(dso*, const char*, u64)':
util/llvm-c-helpers.cpp:178:21: error: 'std::remove_reference_t<llvm::DILineInfo>' {aka 'struct llvm::DILineInfo'} has no member named 'StartAddress'
178 | addr, res_or_err->StartAddress ? *res_or_err->StartAddress : 0);
Fixes: c3f8644c21df9b7d ("perf report: Support LLVM for addr2line()")
Signed-off-by: James Clark <james.clark@linaro.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Guilherme Amadio <amadio@gentoo.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Manu Bretelle <chantr4@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <qmo@kernel.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Link: https://lore.kernel.org/r/20240910140405.568791-1-james.clark@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In addition to the existing support for libbfd and calling out to
an external addr2line command, add support for using libllvm directly.
This is both faster than libbfd, and can be enabled in distro builds
(the LLVM license has an explicit provision for GPLv2 compatibility).
Thus, it is set as the primary choice if available.
As an example, running 'perf report' on a medium-size profile with
DWARF-based backtraces took 58 seconds with LLVM, 78 seconds with
libbfd, 153 seconds with external llvm-addr2line, and I got tired and
aborted the test after waiting for 55 minutes with external bfd
addr2line (which is the default for perf as compiled by distributions
today).
Evidently, for this case, the bfd addr2line process needs 18 seconds (on
a 5.2 GHz Zen 3) to load the .debug ELF in question, hits the 1-second
timeout and gets killed during initialization, getting restarted anew
every time. Having an in-process addr2line makes this much more robust.
As future extensions, libllvm can be used in many other places where
we currently use libbfd or other libraries:
- Symbol enumeration (in particular, for PE binaries).
- Demangling (including non-Itanium demangling, e.g. Microsoft
or Rust).
- Disassembling (perf annotate).
However, these are much less pressing; most people don't profile PE
binaries, and perf has non-bfd paths for ELF. The same with demangling;
the default _cxa_demangle path works fine for most users, and while bfd
objdump can be slow on large binaries, it is possible to use
--objdump=llvm-objdump to get the speed benefits. (It appears
LLVM-based demangling is very simple, should we want that.)
Tested with LLVM 14, 15, 16, 18 and 19. For some reason, LLVM 12 was not
correctly detected using feature_check, and thus was not tested.
Committer notes:
Added the name and a __maybe_unused to address:
1 13.50 almalinux:8 : FAIL gcc version 8.5.0 20210514 (Red Hat 8.5.0-22) (GCC)
util/srcline.c: In function 'dso__free_a2l':
util/srcline.c:184:20: error: parameter name omitted
void dso__free_a2l(struct dso *)
^~~~~~~~~~~~
make[3]: *** [/git/perf-6.11.0-rc3/tools/build/Makefile.build:158: util] Error 2
Signed-off-by: Steinar H. Gunderson <sesse@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20240803152008.2818485-1-sesse@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
feature detection from working"
Ian pointed out that the libcap feature test is also used by bpftool, so
we can't remove it just because perf stopped using it, revert the
removal of the feature test.
Since both perf and libcap uses the fast path feature detection
(tools/build/feature/test-all.c), probably the best thing is to keep
libcap-devel when building perf even it not being used there.
This reverts commit 47b3b6435e4bfb61ae8ffc63a11bd3c310f69acf.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
detection from working
I noticed that the fast path feature detection was failing:
$ cat /tmp/build/perf-tools-next/feature/test-all.make.output
/usr/bin/ld: cannot find -lcap: No such file or directory
collect2: error: ld returned 1 exit status
$
The patch removing the dependency (Fixes tag below) didn't remove the
detection of libcap, and as the fast path feature detection (test-all.c)
had -lcap in its Makefile link list of libraries to link, it was failing
when libcap-devel is not available, fix it by removing those leftover
files.
Fixes: e25ebda78e230283 ("perf cap: Tidy up and improve capability testing")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/Zs-gjOGFWtAvIZit@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The fixdep binary is being compiled and linked in one step. While the
host linker flags are passed to the compiler the host compiler flags are
missed.
That leads to build errors at least on x86_64, arm64 and s390 as result
of the compiler vs linker flags inconsistency. For example, during RPM
package build redhat-hardened-ld script is provided to gcc, while
redhat-hardened-cc1 script is missed.
Provide both KBUILD_HOSTCFLAGS and KBUILD_HOSTLDFLAGS to avoid that.
Fixes: ea974028a049f2ce ("tools build: Avoid circular .fixdep-in.o.cmd issues")
Closes: https://lore.kernel.org/lkml/99ae0d34-ed76-4ca0-a9fd-c337da33c9f9@leemhuis.info/
Reported-by: Thorsten Leemhuis <linux@leemhuis.info>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Tested-by: Thorsten Leemhuis <linux@leemhuis.info>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20240815072046.1002837-1-agordeev@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The capstone devel headers define 'struct bpf_insn' in a way that clashes with
what is in the libbpf devel headers, so we so far need to avoid including both.
This is happening on the tools/build/feature/test-all.c file, where we try
building all the expected set of libraries to be normally available on a
system:
⬢[acme@toolbox perf-tools-next]$ cat /tmp/build/perf-tools-next/feature/test-all.make.output
In file included from test-bpf.c:3,
from test-all.c:150:
/home/acme/git/perf-tools-next/tools/include/uapi/linux/bpf.h:77:8: error: ‘bpf_insn’ defined as wrong kind of tag
77 | struct bpf_insn {
| ^~~~~~~~
⬢[acme@toolbox perf-tools-next]$ cat /tmp/build/perf-tools-next/feature/test-all.make.output
When doing so there is a trick where we define main to be
main_test_libcapstone, then include the individual
tools/build/feture/test-libcapstone.c capability query test, and then we undef
'main' because we'll do it all over again with the next expected library to
be tested (at this time 'lzma').
To complete this mechanism we need to, in test-all.c 'main' routine, to
call main_test_libcapstone(), which isn't being done, so the effect of
adding references to capstone in test-all.c are not achieved.
The only thing that is happening is that test-all.c is failing to build and thus
all the tests will have to be done individually, which nullifies the test-all.c
single build speedup.
So lets remove references to capstone from test-all.c to see if this makes it
build again so that we get faster builds or go on fixing up whatever is
preventing us to get that benefit.
Nothing: after this fix we get a clean test-all.c build and get the build speedup back:
⬢[acme@toolbox perf-tools-next]$ cat /tmp/build/perf-tools-next/feature/test-all.make.output
⬢[acme@toolbox perf-tools-next]$ cat /tmp/build/perf-tools-next/feature/test-all.
test-all.bin test-all.d test-all.make.output
⬢[acme@toolbox perf-tools-next]$ cat /tmp/build/perf-tools-next/feature/test-all.make.output
⬢[acme@toolbox perf-tools-next]$ ldd /tmp/build/perf-tools-next/feature/test-all.bin
linux-vdso.so.1 (0x00007f13277a1000)
libpython3.12.so.1.0 => /lib64/libpython3.12.so.1.0 (0x00007f1326e00000)
libm.so.6 => /lib64/libm.so.6 (0x00007f13274be000)
libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1327496000)
libtracefs.so.1 => /lib64/libtracefs.so.1 (0x00007f132746f000)
libcrypto.so.3 => /lib64/libcrypto.so.3 (0x00007f1326800000)
libunwind-x86_64.so.8 => /lib64/libunwind-x86_64.so.8 (0x00007f1327452000)
libunwind.so.8 => /lib64/libunwind.so.8 (0x00007f1327436000)
liblzma.so.5 => /lib64/liblzma.so.5 (0x00007f1327403000)
libdw.so.1 => /lib64/libdw.so.1 (0x00007f1326d6f000)
libz.so.1 => /lib64/libz.so.1 (0x00007f13273e2000)
libelf.so.1 => /lib64/libelf.so.1 (0x00007f1326d53000)
libnuma.so.1 => /lib64/libnuma.so.1 (0x00007f13273d4000)
libslang.so.2 => /lib64/libslang.so.2 (0x00007f1326400000)
libperl.so.5.38 => /lib64/libperl.so.5.38 (0x00007f1326000000)
libc.so.6 => /lib64/libc.so.6 (0x00007f1325e0f000)
libzstd.so.1 => /lib64/libzstd.so.1 (0x00007f1326741000)
/lib64/ld-linux-x86-64.so.2 (0x00007f13277a3000)
libbz2.so.1 => /lib64/libbz2.so.1 (0x00007f1326d3f000)
libcrypt.so.2 => /lib64/libcrypt.so.2 (0x00007f1326d07000)
⬢[acme@toolbox perf-tools-next]$
And when having capstone-devel installed we get it detected and linked with
perf, allowing us to benefit from the features that it enables:
⬢[acme@toolbox perf-tools-next]$ rpm -q capstone-devel
capstone-devel-5.0.1-3.fc40.x86_64
⬢[acme@toolbox perf-tools-next]$ ldd /tmp/build/perf-tools-next/perf | grep capstone
libcapstone.so.5 => /lib64/libcapstone.so.5 (0x00007fe6a5c00000)
⬢[acme@toolbox perf-tools-next]$ /tmp/build/perf-tools-next/perf -vv | grep cap
libcapstone: [ on ] # HAVE_LIBCAPSTONE_SUPPORT
⬢[acme@toolbox perf-tools-next]$
Fixes: 8b767db3309595a2 ("perf: build: introduce the libcapstone")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/Zry0sepD5Ppa5YKP@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The dependencies in tools/lib/bpf/Makefile are incorrect. Before we
recurse to build $(BPF_IN_STATIC), we need to build its 'fixdep'
executable.
I can't use the usual shortcut from Makefile.include:
<target>: <sources> fixdep
because its 'fixdep' target relies on $(OUTPUT), and $(OUTPUT) differs
in the parent 'make' versus the child 'make' -- so I imitate it via
open-coding.
I tweak a few $(MAKE) invocations while I'm at it, because
1. I'm adding a new recursive make; and
2. these recursive 'make's print spurious lines about files that are "up
to date" (which isn't normally a feature in Kbuild subtargets) or
"jobserver not available" (see [1])
I also need to tweak the assignment of the OUTPUT variable, so that
relative path builds work. For example, for 'make tools/lib/bpf', OUTPUT
is unset, and is usually treated as "cwd" -- but recursive make will
change cwd and so OUTPUT has a new meaning. For consistency, I ensure
OUTPUT is always an absolute path.
And $(Q) gets a backup definition in tools/build/Makefile.include,
because Makefile.include is sometimes included without
tools/build/Makefile, so the "quiet command" stuff doesn't actually work
consistently without it.
After this change, top-level builds result in an empty grep result from:
$ grep 'cannot find fixdep' $(find tools/ -name '*.cmd')
[1] https://www.gnu.org/software/make/manual/html_node/MAKE-Variable.html
If we're not using $(MAKE) directly, then we need to use more '+'.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240715203325.3832977-4-briannorris@chromium.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The 'fixdep' tool is used to post-process dependency files for various
reasons, and it runs after every object file generation command. This
even includes 'fixdep' itself.
In Kbuild, this isn't actually a problem, because it uses a single
command to generate fixdep (a compile-and-link command on fixdep.c), and
afterward runs the fixdep command on the accompanying .fixdep.cmd file.
In tools/ builds (which notably is maintained separately from Kbuild),
fixdep is generated in several phases:
1. fixdep.c -> fixdep-in.o
2. fixdep-in.o -> fixdep
Thus, fixdep is not available in the post-processing for step 1, and
instead, we generate .cmd files that look like:
## from tools/objtool/libsubcmd/.fixdep.o.cmd
# cannot find fixdep (/path/to/linux/tools/objtool/libsubcmd//fixdep)
[...]
These invalid .cmd files are benign in some respects, but cause problems
in others (such as the linked reports).
Because the tools/ build system is rather complicated in its own right
(and pointedly different than Kbuild), I choose to simply open-code the
rule for building fixdep, and avoid the recursive-make indirection that
produces the problem in the first place.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/all/Zk-C5Eg84yt6_nml@google.com/
Link: https://lore.kernel.org/r/20240715203325.3832977-3-briannorris@chromium.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Namhyung Kim:
"Some more build fixes and a random crash fix:
- Fix cross-build by setting pkg-config env according to the arch
- Fix static build for missing library dependencies
- Fix Segfault when callchain has no symbols"
* tag 'perf-tools-fixes-for-v6.11-2024-07-30' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf docs: Document cross compilation
perf: build: Link lib 'zstd' for static build
perf: build: Link lib 'lzma' for static build
perf: build: Only link libebl.a for old libdw
perf: build: Set Python configuration for cross compilation
perf: build: Setup PKG_CONFIG_LIBDIR for cross compilation
perf tool: fix dereferencing NULL al->maps
|
|
When build static perf, Makefile reports the error:
Makefile.config:480: No libdw DWARF unwind found, Please install
elfutils-devel/libdw-dev >= 0.158 and/or set LIBDW_DIR
The libdw has been installed on the system, but the build system fails
to build the feature detecting binary 'test-libdw-dwarf-unwind'. The
failure is caused by missing to link the lib 'zstd'.
Link lib 'zstd' for the static build, in the end, the dwarf feature can
be enabled in the static perf.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: amadio@gentoo.org
Cc: James Clark <james.clark@linaro.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240717082211.524826-6-leo.yan@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The libunwind feature test failed with the static linkage. This is due
to the 'lzma' lib is missed, so link it to dismiss building failure.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: amadio@gentoo.org
Cc: James Clark <james.clark@linaro.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240717082211.524826-5-leo.yan@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Since libdw version 0.177, elfutils has merged libebl.a into libdw (see
the commit "libebl: Don't install libebl.a, libebl.h and remove backends
from spec." in the elfutils repository).
As a result, libebl.a does not exist on Debian Bullseye and newer
releases, causing static perf builds to fail on these distributions.
This commit checks the libdw version and only links libebl.a if it
detects that the libdw version is older than 0.177.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: amadio@gentoo.org
Cc: James Clark <james.clark@linaro.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240717082211.524826-4-leo.yan@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
On recent Linux distros like Ubuntu Noble and Debian Bookworm, the
'pkg-config-aarch64-linux-gnu' package is missing. As a result, the
aarch64-linux-gnu-pkg-config command is not available, which causes
build failures.
When a build passes the environment variables PKG_CONFIG_LIBDIR or
PKG_CONFIG_PATH, like a user uses make command or a build system
(like Yocto, Buildroot, etc) prepares the variables and passes to the
Perf's Makefile, the commit keeps these variables for package
configuration. Otherwise, this commit sets the PKG_CONFIG_LIBDIR
variable to use the Multiarch libs for the cross compilation.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: amadio@gentoo.org
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240717082211.524826-2-leo.yan@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Namhyung Kim:
"Two fixes for building perf and other tools:
- Fix breakage in tracing tools due to pkg-config for
libtrace{event,fs}
- Fix build of perf when libunwind is used"
* tag 'perf-tools-fixes-for-v6.11-2024-07-23' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf dso: Fix build when libunwind is enabled
tools/latency: Use pkg-config in lib_setup of Makefile.config
tools/rtla: Use pkg-config in lib_setup of Makefile.config
tools/verification: Use pkg-config in lib_setup of Makefile.config
tools: Make pkg-config dependency checks usable by other tools
perf build: Warn if libtracefs is not found
|
|
Other tools, in tools/verification and tools/tracing, make use of
libtraceevent and libtracefs as dependencies. This allows setting
up the feature check flags for them as well.
Signed-off-by: Guilherme Amadio <amadio@gentoo.org>
Tested-by: Thorsten Leemhuis <linux@leemhuis.info>
Tested-by: Leo Yan <leo.yan@arm.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: linux-trace-devel@vger.kernel.org
Link: https://lore.kernel.org/r/20240717174739.186988-3-amadio@gentoo.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Needed to add required include directories for the feature detection
to succeed. The header tracefs.h is installed either into the include
directory /usr/include/tracefs/tracefs.h when using the Makefile, or
into /usr/include/libtracefs/tracefs.h when using meson to build
libtracefs. The header tracefs.h uses #include <event-parse.h> from
libtraceevent, so pkg-config needs to pick the correct include directory
for libtracefs and add the one for libtraceevent to succeed.
Note that in baa2ca59ec1e31ccbe3f24ff0368152b36f68720 the variable
LIBTRACEEVENT_DIR was introduced, and now the method to compile against
non-standard locations requires PKG_CONFIG_PATH to be set instead, which
works for both libtraceevent and libtracefs.
Signed-off-by: Guilherme Amadio <amadio@gentoo.org>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240606153625.2255470-2-amadio@gentoo.org
|
|
Use libtracefs as package name to lookup the CFLAGS for libtracefs. This
makes it possible to use the distro specific path as include path for
the header file.
Link: https://lkml.kernel.org/r/20240617-rtla-build-v1-1-6882c34678e8@suse.de
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
|
|
Later we will use libcapstone to disassemble instructions of samples.
Signed-off-by: Changbin Du <changbin.du@huawei.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: changbin.du@gmail.com
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240217074046.4100789-2-changbin.du@huawei.com
|
|
Since commit d927ef5004ef ("perf cs-etm: Add exception level consistency
check"), the exception that was added to Perf will be triggered unless
the following bugfix from OpenCSD is present:
- _Version 1.2.1_:
- __Bugfix__:
ETM4x / ETE - output of context elements to client can in some
circumstances be delayed until after subsequent atoms have been
processed leading to incorrect memory decode access via the client
callbacks. Fixed to flush context elements immediately they are
committed.
Rather than remove the assert and silently fail, just increase the
minimum version requirement to avoid hard to debug issues and
regressions.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230901133716.677499-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The dwarf_getcfi() is available on libdw 0.142+. Instead of just
checking the version number, it'd be nice to have a config item to check
the feature at build time.
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: linux-toolchains@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Link: https://lore.kernel.org/r/20231110000012.3538610-9-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To get the latest fixes in the perf tools including perf stat output,
dlfilter and LLVM feature detection.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
