15873 files changed, 1611281 insertions, 726959 deletions

diff --git a/arch/Kconfig b/arch/Kconfig
index 8df1c7102643..31220f512b16 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -9,35 +9,117 @@
 #
 source "arch/$(SRCARCH)/Kconfig"
 
+config ARCH_CONFIGURES_CPU_MITIGATIONS
+	bool
+
+if !ARCH_CONFIGURES_CPU_MITIGATIONS
+config CPU_MITIGATIONS
+	def_bool y
+endif
+
+#
+# Selected by architectures that need custom DMA operations for e.g. legacy
+# IOMMUs not handled by dma-iommu.  Drivers must never select this symbol.
+#
+config ARCH_HAS_DMA_OPS
+	depends on HAS_DMA
+	select DMA_OPS_HELPERS
+	bool
+
 menu "General architecture-dependent options"
 
-config CRASH_CORE
+config ARCH_HAS_SUBPAGE_FAULTS
 	bool
+	help
+	  Select if the architecture can check permissions at sub-page
+	  granularity (e.g. arm64 MTE). The probe_user_*() functions
+	  must be implemented.
 
-config KEXEC_CORE
-	select CRASH_CORE
+config HOTPLUG_SMT
 	bool
 
-config KEXEC_ELF
+config SMT_NUM_THREADS_DYNAMIC
 	bool
 
-config HAVE_IMA_KEXEC
+config ARCH_SUPPORTS_SCHED_SMT
 	bool
 
-config SET_FS
+config ARCH_SUPPORTS_SCHED_CLUSTER
 	bool
 
-config HOTPLUG_SMT
+config ARCH_SUPPORTS_SCHED_MC
+	bool
+
+config SCHED_SMT
+	bool "SMT (Hyperthreading) scheduler support"
+	depends on ARCH_SUPPORTS_SCHED_SMT
+	default y
+	help
+	  Improves the CPU scheduler's decision making when dealing with
+	  MultiThreading at a cost of slightly increased overhead in some
+	  places. If unsure say N here.
+
+config SCHED_CLUSTER
+	bool "Cluster scheduler support"
+	depends on ARCH_SUPPORTS_SCHED_CLUSTER
+	default y
+	help
+	  Cluster scheduler support improves the CPU scheduler's decision
+	  making when dealing with machines that have clusters of CPUs.
+	  Cluster usually means a couple of CPUs which are placed closely
+	  by sharing mid-level caches, last-level cache tags or internal
+	  busses.
+
+config SCHED_MC
+	bool "Multi-Core Cache (MC) scheduler support"
+	depends on ARCH_SUPPORTS_SCHED_MC
+	default y
+	help
+	  Multi-core scheduler support improves the CPU scheduler's decision
+	  making when dealing with multi-core CPU chips at a cost of slightly
+	  increased overhead in some places. If unsure say N here.
+
+# Selected by HOTPLUG_CORE_SYNC_DEAD or HOTPLUG_CORE_SYNC_FULL
+config HOTPLUG_CORE_SYNC
+	bool
+
+# Basic CPU dead synchronization selected by architecture
+config HOTPLUG_CORE_SYNC_DEAD
+	bool
+	select HOTPLUG_CORE_SYNC
+
+# Full CPU synchronization with alive state selected by architecture
+config HOTPLUG_CORE_SYNC_FULL
+	bool
+	select HOTPLUG_CORE_SYNC_DEAD if HOTPLUG_CPU
+	select HOTPLUG_CORE_SYNC
+
+config HOTPLUG_SPLIT_STARTUP
+	bool
+	select HOTPLUG_CORE_SYNC_FULL
+
+config HOTPLUG_PARALLEL
 	bool
+	select HOTPLUG_SPLIT_STARTUP
+
+config GENERIC_IRQ_ENTRY
+	bool
+
+config GENERIC_SYSCALL
+	bool
+	depends on GENERIC_IRQ_ENTRY
 
 config GENERIC_ENTRY
-       bool
+	bool
+	select GENERIC_IRQ_ENTRY
+	select GENERIC_SYSCALL
 
 config KPROBES
 	bool "Kprobes"
-	depends on MODULES
 	depends on HAVE_KPROBES
 	select KALLSYMS
+	select EXECMEM
+	select NEED_TASKS_RCU
 	help
 	  Kprobes allows you to trap at almost any kernel address and
 	  execute a callback function.  register_kprobe() establishes
@@ -48,28 +130,28 @@ config KPROBES
 config JUMP_LABEL
 	bool "Optimize very unlikely/likely branches"
 	depends on HAVE_ARCH_JUMP_LABEL
-	depends on CC_HAS_ASM_GOTO
+	select OBJTOOL if HAVE_JUMP_LABEL_HACK
 	help
-	 This option enables a transparent branch optimization that
-	 makes certain almost-always-true or almost-always-false branch
-	 conditions even cheaper to execute within the kernel.
+	  This option enables a transparent branch optimization that
+	  makes certain almost-always-true or almost-always-false branch
+	  conditions even cheaper to execute within the kernel.
 
-	 Certain performance-sensitive kernel code, such as trace points,
-	 scheduler functionality, networking code and KVM have such
-	 branches and include support for this optimization technique.
+	  Certain performance-sensitive kernel code, such as trace points,
+	  scheduler functionality, networking code and KVM have such
+	  branches and include support for this optimization technique.
 
-	 If it is detected that the compiler has support for "asm goto",
-	 the kernel will compile such branches with just a nop
-	 instruction. When the condition flag is toggled to true, the
-	 nop will be converted to a jump instruction to execute the
-	 conditional block of instructions.
+	  If it is detected that the compiler has support for "asm goto",
+	  the kernel will compile such branches with just a nop
+	  instruction. When the condition flag is toggled to true, the
+	  nop will be converted to a jump instruction to execute the
+	  conditional block of instructions.
 
-	 This technique lowers overhead and stress on the branch prediction
-	 of the processor and generally makes the kernel faster. The update
-	 of the condition is slower, but those are always very rare.
+	  This technique lowers overhead and stress on the branch prediction
+	  of the processor and generally makes the kernel faster. The update
+	  of the condition is slower, but those are always very rare.
 
-	 ( On 32-bit x86, the necessary options added to the compiler
-	   flags may increase the size of the kernel slightly. )
+	  ( On 32-bit x86, the necessary options added to the compiler
+	    flags may increase the size of the kernel slightly. )
 
 config STATIC_KEYS_SELFTEST
 	bool "Static key selftest"
@@ -86,20 +168,21 @@ config STATIC_CALL_SELFTEST
 config OPTPROBES
 	def_bool y
 	depends on KPROBES && HAVE_OPTPROBES
-	select TASKS_RCU if PREEMPTION
+	select NEED_TASKS_RCU
 
 config KPROBES_ON_FTRACE
 	def_bool y
 	depends on KPROBES && HAVE_KPROBES_ON_FTRACE
 	depends on DYNAMIC_FTRACE_WITH_REGS
 	help
-	 If function tracer is enabled and the arch supports full
-	 passing of pt_regs to function tracing, then kprobes can
-	 optimize on top of function tracing.
+	  If function tracer is enabled and the arch supports full
+	  passing of pt_regs to function tracing, then kprobes can
+	  optimize on top of function tracing.
 
 config UPROBES
 	def_bool n
 	depends on ARCH_SUPPORTS_UPROBES
+	select TASKS_TRACE_RCU
 	help
 	  Uprobes is the user-space counterpart to kprobes: they
 	  enable instrumentation applications (such as 'perf probe')
@@ -149,25 +232,28 @@ config HAVE_EFFICIENT_UNALIGNED_ACCESS
 config ARCH_USE_BUILTIN_BSWAP
 	bool
 	help
-	 Modern versions of GCC (since 4.4) have builtin functions
-	 for handling byte-swapping. Using these, instead of the old
-	 inline assembler that the architecture code provides in the
-	 __arch_bswapXX() macros, allows the compiler to see what's
-	 happening and offers more opportunity for optimisation. In
-	 particular, the compiler will be able to combine the byteswap
-	 with a nearby load or store and use load-and-swap or
-	 store-and-swap instructions if the architecture has them. It
-	 should almost *never* result in code which is worse than the
-	 hand-coded assembler in <asm/swab.h>.  But just in case it
-	 does, the use of the builtins is optional.
+	  GCC and Clang have builtin functions for handling byte-swapping.
+	  Using these allows the compiler to see what's happening and
+	  offers more opportunity for optimisation. In particular, the
+	  compiler will be able to combine the byteswap with a nearby load
+	  or store and use load-and-swap or store-and-swap instructions if
+	  the architecture has them. It should almost *never* result in code
+	  which is worse than the hand-coded assembler in <asm/swab.h>.
+	  But just in case it does, the use of the builtins is optional.
 
-	 Any architecture with load-and-swap or store-and-swap
-	 instructions should set this. And it shouldn't hurt to set it
-	 on architectures that don't have such instructions.
+	  Any architecture with load-and-swap or store-and-swap
+	  instructions should set this. And it shouldn't hurt to set it
+	  on architectures that don't have such instructions.
 
 config KRETPROBES
 	def_bool y
-	depends on KPROBES && HAVE_KRETPROBES
+	depends on KPROBES && (HAVE_KRETPROBES || HAVE_RETHOOK)
+
+config KRETPROBE_ON_RETHOOK
+	def_bool y
+	depends on HAVE_RETHOOK
+	depends on KRETPROBES
+	select RETHOOK
 
 config USER_RETURN_NOTIFIER
 	bool
@@ -191,15 +277,29 @@ config HAVE_OPTPROBES
 config HAVE_KPROBES_ON_FTRACE
 	bool
 
+config ARCH_CORRECT_STACKTRACE_ON_KRETPROBE
+	bool
+	help
+	  Since kretprobes modifies return address on the stack, the
+	  stacktrace may see the kretprobe trampoline address instead
+	  of correct one. If the architecture stacktrace code and
+	  unwinder can adjust such entries, select this configuration.
+
 config HAVE_FUNCTION_ERROR_INJECTION
 	bool
 
 config HAVE_NMI
 	bool
 
+config HAVE_FUNCTION_DESCRIPTORS
+	bool
+
 config TRACE_IRQFLAGS_SUPPORT
 	bool
 
+config TRACE_IRQFLAGS_NMI_SUPPORT
+	bool
+
 #
 # An arch should select this if it provides all these things:
 #
@@ -209,9 +309,8 @@ config TRACE_IRQFLAGS_SUPPORT
 #	asm/syscall.h		supplying asm-generic/syscall.h interface
 #	linux/regset.h		user_regset interfaces
 #	CORE_DUMP_USE_REGSET	#define'd in linux/elf.h
-#	TIF_SYSCALL_TRACE	calls tracehook_report_syscall_{entry,exit}
-#	TIF_NOTIFY_RESUME	calls tracehook_notify_resume()
-#	signal delivery		calls tracehook_signal_handler()
+#	TIF_SYSCALL_TRACE	calls ptrace_report_syscall_{entry,exit}
+#	TIF_NOTIFY_RESUME	calls resume_user_mode_work()
 #
 config HAVE_ARCH_TRACEHOOK
 	bool
@@ -261,17 +360,16 @@ config ARCH_HAS_DMA_SET_UNCACHED
 config ARCH_HAS_DMA_CLEAR_UNCACHED
 	bool
 
-# Select if arch init_task must go in the __init_task_data section
-config ARCH_TASK_STRUCT_ON_STACK
+config ARCH_HAS_CPU_FINALIZE_INIT
 	bool
 
-# Select if arch has its private alloc_task_struct() function
-config ARCH_TASK_STRUCT_ALLOCATOR
+# The architecture has a per-task state that includes the mm's PASID
+config ARCH_HAS_CPU_PASID
 	bool
+	select IOMMU_MM_DATA
 
 config HAVE_ARCH_THREAD_STRUCT_WHITELIST
 	bool
-	depends on !ARCH_TASK_STRUCT_ALLOCATOR
 	help
 	  An architecture should select this to provide hardened usercopy
 	  knowledge about what region of the thread_struct should be
@@ -280,10 +378,6 @@ config HAVE_ARCH_THREAD_STRUCT_WHITELIST
 	  should be implemented. Without this, the entire thread_struct
 	  field in task_struct will be left whitelisted.
 
-# Select if arch has its private alloc_thread_stack() function
-config ARCH_THREAD_STACK_ALLOCATOR
-	bool
-
 # Select if arch wants to size task_struct dynamically via arch_task_struct_size:
 config ARCH_WANTS_DYNAMIC_TASK_STRUCT
 	bool
@@ -331,6 +425,12 @@ config HAVE_RSEQ
 	  This symbol should be selected by an architecture if it
 	  supports an implementation of restartable sequences.
 
+config HAVE_RUST
+	bool
+	help
+	  This symbol should be selected by an architecture if it
+	  supports Rust.
+
 config HAVE_FUNCTION_ARG_ACCESS_API
 	bool
 	help
@@ -370,20 +470,21 @@ config HAVE_HARDLOCKUP_DETECTOR_PERF
 	  The arch chooses to use the generic perf-NMI-based hardlockup
 	  detector. Must define HAVE_PERF_EVENTS_NMI.
 
-config HAVE_NMI_WATCHDOG
-	depends on HAVE_NMI
+config HAVE_HARDLOCKUP_DETECTOR_ARCH
 	bool
 	help
-	  The arch provides a low level NMI watchdog. It provides
-	  asm/nmi.h, and defines its own arch_touch_nmi_watchdog().
+	  The arch provides its own hardlockup detector implementation instead
+	  of the generic ones.
 
-config HAVE_HARDLOCKUP_DETECTOR_ARCH
+	  It uses the same command line parameters, and sysctl interface,
+	  as the generic hardlockup detectors.
+
+config UNWIND_USER
 	bool
-	select HAVE_NMI_WATCHDOG
-	help
-	  The arch chooses to provide its own hardlockup detector, which is
-	  a superset of the HAVE_NMI_WATCHDOG. It also conforms to config
-	  interfaces and parameters provided by hardlockup detector subsystem.
+
+config HAVE_UNWIND_USER_FP
+	bool
+	select UNWIND_USER
 
 config HAVE_PERF_REGS
 	bool
@@ -416,6 +517,13 @@ config MMU_GATHER_PAGE_SIZE
 
 config MMU_GATHER_NO_RANGE
 	bool
+	select MMU_GATHER_MERGE_VMAS
+
+config MMU_GATHER_NO_FLUSH_CACHE
+	bool
+
+config MMU_GATHER_MERGE_VMAS
+	bool
 
 config MMU_GATHER_NO_GATHER
 	bool
@@ -428,9 +536,53 @@ config ARCH_WANT_IRQS_OFF_ACTIVATE_MM
 	  irqs disabled over activate_mm. Architectures that do IPI based TLB
 	  shootdowns should enable this.
 
+# Use normal mm refcounting for MMU_LAZY_TLB kernel thread references.
+# MMU_LAZY_TLB_REFCOUNT=n can improve the scalability of context switching
+# to/from kernel threads when the same mm is running on a lot of CPUs (a large
+# multi-threaded application), by reducing contention on the mm refcount.
+#
+# This can be disabled if the architecture ensures no CPUs are using an mm as a
+# "lazy tlb" beyond its final refcount (i.e., by the time __mmdrop frees the mm
+# or its kernel page tables). This could be arranged by arch_exit_mmap(), or
+# final exit(2) TLB flush, for example.
+#
+# To implement this, an arch *must*:
+# Ensure the _lazy_tlb variants of mmgrab/mmdrop are used when manipulating
+# the lazy tlb reference of a kthread's ->active_mm (non-arch code has been
+# converted already).
+config MMU_LAZY_TLB_REFCOUNT
+	def_bool y
+	depends on !MMU_LAZY_TLB_SHOOTDOWN
+
+# This option allows MMU_LAZY_TLB_REFCOUNT=n. It ensures no CPUs are using an
+# mm as a lazy tlb beyond its last reference count, by shooting down these
+# users before the mm is deallocated. __mmdrop() first IPIs all CPUs that may
+# be using the mm as a lazy tlb, so that they may switch themselves to using
+# init_mm for their active mm. mm_cpumask(mm) is used to determine which CPUs
+# may be using mm as a lazy tlb mm.
+#
+# To implement this, an arch *must*:
+# - At the time of the final mmdrop of the mm, ensure mm_cpumask(mm) contains
+#   at least all possible CPUs in which the mm is lazy.
+# - It must meet the requirements for MMU_LAZY_TLB_REFCOUNT=n (see above).
+config MMU_LAZY_TLB_SHOOTDOWN
+	bool
+
 config ARCH_HAVE_NMI_SAFE_CMPXCHG
 	bool
 
+config ARCH_HAVE_EXTRA_ELF_NOTES
+	bool
+	help
+	  An architecture should select this in order to enable adding an
+	  arch-specific ELF note section to core files. It must provide two
+	  functions: elf_coredump_extra_notes_size() and
+	  elf_coredump_extra_notes_write() which are invoked by the ELF core
+	  dumper.
+
+config ARCH_HAS_NMI_SAFE_THIS_CPU_OPS
+	bool
+
 config HAVE_ALIGNED_STRUCT_PAGE
 	bool
 	help
@@ -529,11 +681,11 @@ config SECCOMP_CACHE_DEBUG
 
 	  If unsure, say N.
 
-config HAVE_ARCH_STACKLEAK
+config HAVE_ARCH_KSTACK_ERASE
 	bool
 	help
 	  An architecture should select this if it has the code which
-	  fills the used part of the kernel stack with the STACKLEAK_POISON
+	  fills the used part of the kernel stack with the KSTACK_ERASE_POISON
 	  value before returning from system calls.
 
 config HAVE_STACKPROTECTOR
@@ -591,21 +743,23 @@ config STACKPROTECTOR_STRONG
 config ARCH_SUPPORTS_SHADOW_CALL_STACK
 	bool
 	help
-	  An architecture should select this if it supports Clang's Shadow
-	  Call Stack and implements runtime support for shadow stack
+	  An architecture should select this if it supports the compiler's
+	  Shadow Call Stack and implements runtime support for shadow stack
 	  switching.
 
 config SHADOW_CALL_STACK
-	bool "Clang Shadow Call Stack"
-	depends on CC_IS_CLANG && ARCH_SUPPORTS_SHADOW_CALL_STACK
-	depends on DYNAMIC_FTRACE_WITH_REGS || !FUNCTION_GRAPH_TRACER
+	bool "Shadow Call Stack"
+	depends on ARCH_SUPPORTS_SHADOW_CALL_STACK
+	depends on DYNAMIC_FTRACE_WITH_ARGS || DYNAMIC_FTRACE_WITH_REGS || !FUNCTION_GRAPH_TRACER
+	depends on MMU
 	help
-	  This option enables Clang's Shadow Call Stack, which uses a
-	  shadow stack to protect function return addresses from being
-	  overwritten by an attacker. More information can be found in
-	  Clang's documentation:
+	  This option enables the compiler's Shadow Call Stack, which
+	  uses a shadow stack to protect function return addresses from
+	  being overwritten by an attacker. More information can be found
+	  in the compiler's documentation:
 
-	    https://clang.llvm.org/docs/ShadowCallStack.html
+	  - Clang: https://clang.llvm.org/docs/ShadowCallStack.html
+	  - GCC: https://gcc.gnu.org/onlinedocs/gcc/Instrumentation-Options.html#Instrumentation-Options
 
 	  Note that security guarantees in the kernel differ from the
 	  ones documented for user space. The kernel must store addresses
@@ -613,6 +767,13 @@ config SHADOW_CALL_STACK
 	  reading and writing arbitrary memory may be able to locate them
 	  and hijack control flow by modifying the stacks.
 
+config DYNAMIC_SCS
+	bool
+	help
+	  Set by the arch code if it relies on code patching to insert the
+	  shadow call stack push and pop instructions rather than on the
+	  compiler.
+
 config LTO
 	bool
 	help
@@ -640,13 +801,14 @@ config ARCH_SUPPORTS_LTO_CLANG_THIN
 
 config HAS_LTO_CLANG
 	def_bool y
-	# Clang >= 11: https://github.com/ClangBuiltLinux/linux/issues/510
-	depends on CC_IS_CLANG && CLANG_VERSION >= 110000 && LD_IS_LLD && AS_IS_LLVM
+	depends on CC_IS_CLANG && LD_IS_LLD && AS_IS_LLVM
 	depends on $(success,$(NM) --help | head -n 1 | grep -qi llvm)
 	depends on $(success,$(AR) --help | head -n 1 | grep -qi llvm)
 	depends on ARCH_SUPPORTS_LTO_CLANG
 	depends on !FTRACE_MCOUNT_USE_RECORDMCOUNT
-	depends on !KASAN || KASAN_HW_TAGS
+	# https://github.com/ClangBuiltLinux/linux/issues/1721
+	depends on (!KASAN || KASAN_HW_TAGS || CLANG_VERSION >= 170000) || !DEBUG_INFO
+	depends on (!KCOV || CLANG_VERSION >= 170000) || !DEBUG_INFO
 	depends on !GCOV_KERNEL
 	help
 	  The compiler and Kconfig options support building with Clang's
@@ -673,13 +835,13 @@ config LTO_CLANG_FULL
 	depends on !COMPILE_TEST
 	select LTO_CLANG
 	help
-          This option enables Clang's full Link Time Optimization (LTO), which
-          allows the compiler to optimize the kernel globally. If you enable
-          this option, the compiler generates LLVM bitcode instead of ELF
-          object files, and the actual compilation from bitcode happens at
-          the LTO link step, which may take several minutes depending on the
-          kernel configuration. More information can be found from LLVM's
-          documentation:
+	  This option enables Clang's full Link Time Optimization (LTO), which
+	  allows the compiler to optimize the kernel globally. If you enable
+	  this option, the compiler generates LLVM bitcode instead of ELF
+	  object files, and the actual compilation from bitcode happens at
+	  the LTO link step, which may take several minutes depending on the
+	  kernel configuration. More information can be found from LLVM's
+	  documentation:
 
 	    https://llvm.org/docs/LinkTimeOptimization.html
 
@@ -701,23 +863,72 @@ config LTO_CLANG_THIN
 	  If unsure, say Y.
 endchoice
 
-config ARCH_SUPPORTS_CFI_CLANG
+config ARCH_SUPPORTS_AUTOFDO_CLANG
 	bool
+
+config AUTOFDO_CLANG
+	bool "Enable Clang's AutoFDO build (EXPERIMENTAL)"
+	depends on ARCH_SUPPORTS_AUTOFDO_CLANG
+	depends on CC_IS_CLANG && CLANG_VERSION >= 170000
 	help
-	  An architecture should select this option if it can support Clang's
-	  Control-Flow Integrity (CFI) checking.
+	  This option enables Clang’s AutoFDO build. When
+	  an AutoFDO profile is specified in variable
+	  CLANG_AUTOFDO_PROFILE during the build process,
+	  Clang uses the profile to optimize the kernel.
 
-config CFI_CLANG
-	bool "Use Clang's Control Flow Integrity (CFI)"
-	depends on LTO_CLANG && ARCH_SUPPORTS_CFI_CLANG
-	# Clang >= 12:
-	# - https://bugs.llvm.org/show_bug.cgi?id=46258
-	# - https://bugs.llvm.org/show_bug.cgi?id=47479
-	depends on CLANG_VERSION >= 120000
-	select KALLSYMS
+	  If no profile is specified, AutoFDO options are
+	  still passed to Clang to facilitate the collection
+	  of perf data for creating an AutoFDO profile in
+	  subsequent builds.
+
+	  If unsure, say N.
+
+config ARCH_SUPPORTS_PROPELLER_CLANG
+	bool
+
+config PROPELLER_CLANG
+	bool "Enable Clang's Propeller build"
+	depends on ARCH_SUPPORTS_PROPELLER_CLANG
+	depends on CC_IS_CLANG && CLANG_VERSION >= 190000
 	help
-	  This option enables Clang’s forward-edge Control Flow Integrity
-	  (CFI) checking, where the compiler injects a runtime check to each
+	  This option enables Clang’s Propeller build. When the Propeller
+	  profiles is specified in variable CLANG_PROPELLER_PROFILE_PREFIX
+	  during the build process, Clang uses the profiles to optimize
+	  the kernel.
+
+	  If no profile is specified, Propeller options are still passed
+	  to Clang to facilitate the collection of perf data for creating
+	  the Propeller profiles in subsequent builds.
+
+	  If unsure, say N.
+
+config ARCH_SUPPORTS_CFI
+	bool
+	help
+	  An architecture should select this option if it can support Kernel
+	  Control-Flow Integrity (CFI) checking (-fsanitize=kcfi).
+
+config ARCH_USES_CFI_TRAPS
+	bool
+	help
+	  An architecture should select this option if it requires the
+	  .kcfi_traps section for KCFI trap handling.
+
+config ARCH_USES_CFI_GENERIC_LLVM_PASS
+	bool
+	help
+	  An architecture should select this option if it uses the generic
+	  KCFIPass in LLVM to expand kCFI bundles instead of architecture-specific
+	  lowering.
+
+config CFI
+	bool "Use Kernel Control Flow Integrity (kCFI)"
+	default CFI_CLANG
+	depends on ARCH_SUPPORTS_CFI
+	depends on $(cc-option,-fsanitize=kcfi)
+	help
+	  This option enables forward-edge Control Flow Integrity (CFI)
+	  checking, where the compiler injects a runtime check to each
 	  indirect function call to ensure the target is a valid function with
 	  the correct static type. This restricts possible call targets and
 	  makes it more difficult for an attacker to exploit bugs that allow
@@ -726,19 +937,46 @@ config CFI_CLANG
 
 	    https://clang.llvm.org/docs/ControlFlowIntegrity.html
 
-config CFI_CLANG_SHADOW
-	bool "Use CFI shadow to speed up cross-module checks"
-	default y
-	depends on CFI_CLANG && MODULES
+config CFI_CLANG
+	bool
+	transitional
 	help
-	  If you select this option, the kernel builds a fast look-up table of
-	  CFI check functions in loaded modules to reduce performance overhead.
+	  Transitional config for CFI_CLANG to CFI migration.
 
-	  If unsure, say Y.
+config CFI_ICALL_NORMALIZE_INTEGERS
+	bool "Normalize CFI tags for integers"
+	depends on CFI
+	depends on HAVE_CFI_ICALL_NORMALIZE_INTEGERS
+	help
+	  This option normalizes the CFI tags for integer types so that all
+	  integer types of the same size and signedness receive the same CFI
+	  tag.
+
+	  The option is separate from CONFIG_RUST because it affects the ABI.
+	  When working with build systems that care about the ABI, it is
+	  convenient to be able to turn on this flag first, before Rust is
+	  turned on.
+
+	  This option is necessary for using CFI with Rust. If unsure, say N.
+
+config HAVE_CFI_ICALL_NORMALIZE_INTEGERS
+	def_bool y
+	depends on $(cc-option,-fsanitize=kcfi -fsanitize-cfi-icall-experimental-normalize-integers)
+	# With GCOV/KASAN we need this fix: https://github.com/llvm/llvm-project/pull/104826
+	depends on CLANG_VERSION >= 190103 || (!GCOV_KERNEL && !KASAN_GENERIC && !KASAN_SW_TAGS)
+
+config HAVE_CFI_ICALL_NORMALIZE_INTEGERS_RUSTC
+	def_bool y
+	depends on HAVE_CFI_ICALL_NORMALIZE_INTEGERS
+	depends on RUSTC_VERSION >= 107900
+	depends on ARM64 || X86_64
+	# With GCOV/KASAN we need this fix: https://github.com/rust-lang/rust/pull/129373
+	depends on (RUSTC_LLVM_VERSION >= 190103 && RUSTC_VERSION >= 108200) || \
+		(!GCOV_KERNEL && !KASAN_GENERIC && !KASAN_SW_TAGS)
 
 config CFI_PERMISSIVE
 	bool "Use CFI in permissive mode"
-	depends on CFI_CLANG
+	depends on CFI
 	help
 	  When selected, Control Flow Integrity (CFI) violations result in a
 	  warning instead of a kernel panic. This option should only be used
@@ -755,7 +993,7 @@ config HAVE_ARCH_WITHIN_STACK_FRAMES
 	  and similar) by implementing an inline arch_within_stack_frames(),
 	  which is used by CONFIG_HARDENED_USERCOPY.
 
-config HAVE_CONTEXT_TRACKING
+config HAVE_CONTEXT_TRACKING_USER
 	bool
 	help
 	  Provide kernel/user boundaries probes necessary for subsystems
@@ -763,22 +1001,22 @@ config HAVE_CONTEXT_TRACKING
 	  Syscalls need to be wrapped inside user_exit()-user_enter(), either
 	  optimized behind static key or through the slow path using TIF_NOHZ
 	  flag. Exceptions handlers must be wrapped as well. Irqs are already
-	  protected inside rcu_irq_enter/rcu_irq_exit() but preemption or signal
+	  protected inside ct_irq_enter/ct_irq_exit() but preemption or signal
 	  handling on irq exit still need to be protected.
 
-config HAVE_CONTEXT_TRACKING_OFFSTACK
+config HAVE_CONTEXT_TRACKING_USER_OFFSTACK
 	bool
 	help
 	  Architecture neither relies on exception_enter()/exception_exit()
 	  nor on schedule_user(). Also preempt_schedule_notrace() and
 	  preempt_schedule_irq() can't be called in a preemptible section
-	  while context tracking is CONTEXT_USER. This feature reflects a sane
+	  while context tracking is CT_STATE_USER. This feature reflects a sane
 	  entry implementation where the following requirements are met on
 	  critical entry code, ie: before user_exit() or after user_enter():
 
 	  - Critical entry code isn't preemptible (or better yet:
 	    not interruptible).
-	  - No use of RCU read side critical sections, unless rcu_nmi_enter()
+	  - No use of RCU read side critical sections, unless ct_nmi_enter()
 	    got called.
 	  - No use of instrumentation, unless instrumentation_begin() got
 	    called.
@@ -841,10 +1079,8 @@ config HAVE_ARCH_HUGE_VMAP
 
 #
 #  Archs that select this would be capable of PMD-sized vmaps (i.e.,
-#  arch_vmap_pmd_supported() returns true), and they must make no assumptions
-#  that vmalloc memory is mapped with PAGE_SIZE ptes. The VM_NO_HUGE_VMAP flag
-#  can be used to prohibit arch-specific allocations from using hugepages to
-#  help with this (e.g., modules may require it).
+#  arch_vmap_pmd_supported() returns true). The VM_ALLOW_HUGE_VMAP flag
+#  must be used to enable allocations to use hugepages.
 #
 config HAVE_ARCH_HUGE_VMALLOC
 	depends on HAVE_ARCH_HUGE_VMAP
@@ -853,6 +1089,14 @@ config HAVE_ARCH_HUGE_VMALLOC
 config ARCH_WANT_HUGE_PMD_SHARE
 	bool
 
+# Archs that want to use pmd_mkwrite on kernel memory need it defined even
+# if there are no userspace memory management features that use it
+config ARCH_WANT_KERNEL_PMD_MKWRITE
+	bool
+
+config ARCH_WANT_PMD_MKWRITE
+	def_bool TRANSPARENT_HUGEPAGE || ARCH_WANT_KERNEL_PMD_MKWRITE
+
 config HAVE_ARCH_SOFT_DIRTY
 	bool
 
@@ -875,6 +1119,28 @@ config MODULES_USE_ELF_REL
 	  Modules only use ELF REL relocations.  Modules with ELF RELA
 	  relocations will give an error.
 
+config ARCH_WANTS_MODULES_DATA_IN_VMALLOC
+	bool
+	help
+	  For architectures like powerpc/32 which have constraints on module
+	  allocation and need to allocate module data outside of module area.
+
+config ARCH_WANTS_EXECMEM_LATE
+	bool
+	help
+	  For architectures that do not allocate executable memory early on
+	  boot, but rather require its initialization late when there is
+	  enough entropy for module space randomization, for instance
+	  arm64.
+
+config ARCH_HAS_EXECMEM_ROX
+	bool
+	depends on MMU && !HIGHMEM
+	help
+	  For architectures that support allocations of executable memory
+	  with read-only execute permissions. Architecture must implement
+	  execmem_fill_trapping_insns() callback to enable this.
+
 config HAVE_IRQ_EXIT_ON_IRQ_STACK
 	bool
 	help
@@ -891,6 +1157,16 @@ config HAVE_SOFTIRQ_ON_OWN_STACK
 	  Architecture provides a function to run __do_softirq() on a
 	  separate stack.
 
+config SOFTIRQ_ON_OWN_STACK
+	def_bool HAVE_SOFTIRQ_ON_OWN_STACK && !PREEMPT_RT
+
+config ALTERNATE_USER_ADDRESS_SPACE
+	bool
+	help
+	  Architectures set this when the CPU uses separate address
+	  spaces for kernel and user space pointers. In this case, the
+	  access_ok() check on a __user pointer is skipped.
+
 config PGTABLE_LEVELS
 	int
 	default 2
@@ -983,6 +1259,107 @@ config HAVE_ARCH_COMPAT_MMAP_BASES
 	  and vice-versa 32-bit applications to call 64-bit mmap().
 	  Required for applications doing different bitness syscalls.
 
+config HAVE_PAGE_SIZE_4KB
+	bool
+
+config HAVE_PAGE_SIZE_8KB
+	bool
+
+config HAVE_PAGE_SIZE_16KB
+	bool
+
+config HAVE_PAGE_SIZE_32KB
+	bool
+
+config HAVE_PAGE_SIZE_64KB
+	bool
+
+config HAVE_PAGE_SIZE_256KB
+	bool
+
+choice
+	prompt "MMU page size"
+
+config PAGE_SIZE_4KB
+	bool "4KiB pages"
+	depends on HAVE_PAGE_SIZE_4KB
+	help
+	  This option select the standard 4KiB Linux page size and the only
+	  available option on many architectures. Using 4KiB page size will
+	  minimize memory consumption and is therefore recommended for low
+	  memory systems.
+	  Some software that is written for x86 systems makes incorrect
+	  assumptions about the page size and only runs on 4KiB pages.
+
+config PAGE_SIZE_8KB
+	bool "8KiB pages"
+	depends on HAVE_PAGE_SIZE_8KB
+	help
+	  This option is the only supported page size on a few older
+	  processors, and can be slightly faster than 4KiB pages.
+
+config PAGE_SIZE_16KB
+	bool "16KiB pages"
+	depends on HAVE_PAGE_SIZE_16KB
+	help
+	  This option is usually a good compromise between memory
+	  consumption and performance for typical desktop and server
+	  workloads, often saving a level of page table lookups compared
+	  to 4KB pages as well as reducing TLB pressure and overhead of
+	  per-page operations in the kernel at the expense of a larger
+	  page cache.
+
+config PAGE_SIZE_32KB
+	bool "32KiB pages"
+	depends on HAVE_PAGE_SIZE_32KB
+	help
+	  Using 32KiB page size will result in slightly higher performance
+	  kernel at the price of higher memory consumption compared to
+	  16KiB pages.	This option is available only on cnMIPS cores.
+	  Note that you will need a suitable Linux distribution to
+	  support this.
+
+config PAGE_SIZE_64KB
+	bool "64KiB pages"
+	depends on HAVE_PAGE_SIZE_64KB
+	help
+	  Using 64KiB page size will result in slightly higher performance
+	  kernel at the price of much higher memory consumption compared to
+	  4KiB or 16KiB pages.
+	  This is not suitable for general-purpose workloads but the
+	  better performance may be worth the cost for certain types of
+	  supercomputing or database applications that work mostly with
+	  large in-memory data rather than small files.
+
+config PAGE_SIZE_256KB
+	bool "256KiB pages"
+	depends on HAVE_PAGE_SIZE_256KB
+	help
+	  256KiB pages have little practical value due to their extreme
+	  memory usage.  The kernel will only be able to run applications
+	  that have been compiled with '-zmax-page-size' set to 256KiB
+	  (the default is 64KiB or 4KiB on most architectures).
+
+endchoice
+
+config PAGE_SIZE_LESS_THAN_64KB
+	def_bool y
+	depends on !PAGE_SIZE_64KB
+	depends on PAGE_SIZE_LESS_THAN_256KB
+
+config PAGE_SIZE_LESS_THAN_256KB
+	def_bool y
+	depends on !PAGE_SIZE_256KB
+
+config PAGE_SHIFT
+	int
+	default	12 if PAGE_SIZE_4KB
+	default	13 if PAGE_SIZE_8KB
+	default	14 if PAGE_SIZE_16KB
+	default	15 if PAGE_SIZE_32KB
+	default	16 if PAGE_SIZE_64KB
+	default	18 if PAGE_SIZE_256KB
+
 # This allows to use a set of generic functions to determine mmap base
 # address by giving priority to top-down scheme only if the process
 # is not in legacy mode (compat task, unlimited stack size or
@@ -994,11 +1371,27 @@ config ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT
 	depends on MMU
 	select ARCH_HAS_ELF_RANDOMIZE
 
+config HAVE_OBJTOOL
+	bool
+
+config HAVE_JUMP_LABEL_HACK
+	bool
+
+config HAVE_NOINSTR_HACK
+	bool
+
+config HAVE_NOINSTR_VALIDATION
+	bool
+
+config HAVE_UACCESS_VALIDATION
+	bool
+	select OBJTOOL
+
 config HAVE_STACK_VALIDATION
 	bool
 	help
-	  Architecture supports the 'objtool check' host tool command, which
-	  performs compile-time stack metadata validation.
+	  Architecture supports objtool compile-time frame pointer rule
+	  validation.
 
 config HAVE_RELIABLE_STACKTRACE
 	bool
@@ -1078,13 +1471,6 @@ config COMPAT_32BIT_TIME
 config ARCH_NO_PREEMPT
 	bool
 
-config ARCH_EPHEMERAL_INODES
-	def_bool n
-	help
-	  An arch should select this symbol if it doesn't keep track of inode
-	  instances on its own, but instead relies on something else (e.g. the
-	  host kernel for an UML kernel).
-
 config ARCH_SUPPORTS_RT
 	bool
 
@@ -1138,16 +1524,29 @@ config HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET
 	  to the compiler, so it will attempt to add canary checks regardless
 	  of the static branch state.
 
-config RANDOMIZE_KSTACK_OFFSET_DEFAULT
-	bool "Randomize kernel stack offset on syscall entry"
+config RANDOMIZE_KSTACK_OFFSET
+	bool "Support for randomizing kernel stack offset on syscall entry" if EXPERT
+	default y
 	depends on HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET
 	help
 	  The kernel stack offset can be randomized (after pt_regs) by
 	  roughly 5 bits of entropy, frustrating memory corruption
 	  attacks that depend on stack address determinism or
-	  cross-syscall address exposures. This feature is controlled
-	  by kernel boot param "randomize_kstack_offset=on/off", and this
-	  config chooses the default boot state.
+	  cross-syscall address exposures.
+
+	  The feature is controlled via the "randomize_kstack_offset=on/off"
+	  kernel boot param, and if turned off has zero overhead due to its use
+	  of static branches (see JUMP_LABEL).
+
+	  If unsure, say Y.
+
+config RANDOMIZE_KSTACK_OFFSET_DEFAULT
+	bool "Default state of kernel stack offset randomization"
+	depends on RANDOMIZE_KSTACK_OFFSET
+	help
+	  Kernel stack offset randomization is controlled by kernel boot param
+	  "randomize_kstack_offset=on/off", and this config chooses the default
+	  boot state.
 
 config ARCH_OPTIONAL_KERNEL_RWX
 	def_bool n
@@ -1187,6 +1586,14 @@ config STRICT_MODULE_RWX
 config ARCH_HAS_PHYS_TO_DMA
 	bool
 
+config ARCH_HAS_CPU_RESCTRL
+	bool
+	help
+	  An architecture selects this option to indicate that the necessary
+	  hooks are provided to support the common memory system usage
+	  monitoring and control interfaces provided by the 'resctrl'
+	  filesystem (see RESCTRL_FS).
+
 config HAVE_ARCH_COMPILER_H
 	bool
 	help
@@ -1195,6 +1602,14 @@ config HAVE_ARCH_COMPILER_H
 	  linux/compiler-*.h in order to override macro definitions that those
 	  headers generally provide.
 
+config HAVE_ARCH_LIBGCC_H
+	bool
+	help
+	  An architecture can select this if it provides an
+	  asm/libgcc.h header that should be included after
+	  linux/libgcc.h in order to override macro definitions that
+	  header generally provides.
+
 config HAVE_ARCH_PREL32_RELOCATIONS
 	bool
 	help
@@ -1234,15 +1649,22 @@ config RELR
 config ARCH_HAS_MEM_ENCRYPT
 	bool
 
+config ARCH_HAS_CC_PLATFORM
+	bool
+
 config HAVE_SPARSE_SYSCALL_NR
-       bool
-       help
-          An architecture should select this if its syscall numbering is sparse
+	bool
+	help
+	  An architecture should select this if its syscall numbering is sparse
 	  to save space. For example, MIPS architecture has a syscall array with
 	  entries at 4000, 5000 and 6000 locations. This option turns on syscall
 	  related optimizations for a given architecture.
 
-config ARCH_HAS_VDSO_DATA
+config ARCH_HAS_VDSO_ARCH_DATA
+	depends on HAVE_GENERIC_VDSO
+	bool
+
+config ARCH_HAS_VDSO_TIME_DATA
 	bool
 
 config HAVE_STATIC_CALL
@@ -1251,15 +1673,45 @@ config HAVE_STATIC_CALL
 config HAVE_STATIC_CALL_INLINE
 	bool
 	depends on HAVE_STATIC_CALL
+	select OBJTOOL
 
 config HAVE_PREEMPT_DYNAMIC
 	bool
+
+config HAVE_PREEMPT_DYNAMIC_CALL
+	bool
 	depends on HAVE_STATIC_CALL
-	depends on GENERIC_ENTRY
+	select HAVE_PREEMPT_DYNAMIC
 	help
-	   Select this if the architecture support boot time preempt setting
-	   on top of static calls. It is strongly advised to support inline
-	   static call to avoid any overhead.
+	  An architecture should select this if it can handle the preemption
+	  model being selected at boot time using static calls.
+
+	  Where an architecture selects HAVE_STATIC_CALL_INLINE, any call to a
+	  preemption function will be patched directly.
+
+	  Where an architecture does not select HAVE_STATIC_CALL_INLINE, any
+	  call to a preemption function will go through a trampoline, and the
+	  trampoline will be patched.
+
+	  It is strongly advised to support inline static call to avoid any
+	  overhead.
+
+config HAVE_PREEMPT_DYNAMIC_KEY
+	bool
+	depends on HAVE_ARCH_JUMP_LABEL
+	select HAVE_PREEMPT_DYNAMIC
+	help
+	  An architecture should select this if it can handle the preemption
+	  model being selected at boot time using static keys.
+
+	  Each preemption function will be given an early return based on a
+	  static key. This should have slightly lower overhead than non-inline
+	  static calls, as this effectively inlines each trampoline into the
+	  start of its callee. This may avoid redundant work, and may
+	  integrate better with CFI schemes.
+
+	  This will have greater overhead than using inline static calls as
+	  the call to the preemption function cannot be entirely elided.
 
 config ARCH_WANT_LD_ORPHAN_WARN
 	bool
@@ -1276,11 +1728,14 @@ config HAVE_ARCH_PFN_VALID
 config ARCH_SUPPORTS_DEBUG_PAGEALLOC
 	bool
 
+config ARCH_SUPPORTS_PAGE_TABLE_CHECK
+	bool
+
 config ARCH_SPLIT_ARG64
 	bool
 	help
-	   If a 32-bit architecture requires 64-bit arguments to be split into
-	   pairs of 32-bit arguments, select this option.
+	  If a 32-bit architecture requires 64-bit arguments to be split into
+	  pairs of 32-bit arguments, select this option.
 
 config ARCH_HAS_ELFCORE_COMPAT
 	bool
@@ -1288,8 +1743,99 @@ config ARCH_HAS_ELFCORE_COMPAT
 config ARCH_HAS_PARANOID_L1D_FLUSH
 	bool
 
+config ARCH_HAVE_TRACE_MMIO_ACCESS
+	bool
+
+config DYNAMIC_SIGFRAME
+	bool
+
+# Select, if arch has a named attribute group bound to NUMA device nodes.
+config HAVE_ARCH_NODE_DEV_GROUP
+	bool
+
+config ARCH_HAS_HW_PTE_YOUNG
+	bool
+	help
+	  Architectures that select this option are capable of setting the
+	  accessed bit in PTE entries when using them as part of linear address
+	  translations. Architectures that require runtime check should select
+	  this option and override arch_has_hw_pte_young().
+
+config ARCH_HAS_NONLEAF_PMD_YOUNG
+	bool
+	help
+	  Architectures that select this option are capable of setting the
+	  accessed bit in non-leaf PMD entries when using them as part of linear
+	  address translations. Page table walkers that clear the accessed bit
+	  may use this capability to reduce their search space.
+
+config ARCH_HAS_KERNEL_FPU_SUPPORT
+	bool
+	help
+	  Architectures that select this option can run floating-point code in
+	  the kernel, as described in Documentation/core-api/floating-point.rst.
+
+config ARCH_VMLINUX_NEEDS_RELOCS
+	bool
+	help
+	  Whether the architecture needs vmlinux to be built with static
+	  relocations preserved. This is used by some architectures to
+	  construct bespoke relocation tables for KASLR.
+
+# Select if architecture uses the common generic TIF bits
+config HAVE_GENERIC_TIF_BITS
+       bool
+
 source "kernel/gcov/Kconfig"
 
 source "scripts/gcc-plugins/Kconfig"
 
+config FUNCTION_ALIGNMENT_4B
+	bool
+
+config FUNCTION_ALIGNMENT_8B
+	bool
+
+config FUNCTION_ALIGNMENT_16B
+	bool
+
+config FUNCTION_ALIGNMENT_32B
+	bool
+
+config FUNCTION_ALIGNMENT_64B
+	bool
+
+config FUNCTION_ALIGNMENT
+	int
+	default 64 if FUNCTION_ALIGNMENT_64B
+	default 32 if FUNCTION_ALIGNMENT_32B
+	default 16 if FUNCTION_ALIGNMENT_16B
+	default 8 if FUNCTION_ALIGNMENT_8B
+	default 4 if FUNCTION_ALIGNMENT_4B
+	default 0
+
+config CC_HAS_MIN_FUNCTION_ALIGNMENT
+	# Detect availability of the GCC option -fmin-function-alignment which
+	# guarantees minimal alignment for all functions, unlike
+	# -falign-functions which the compiler ignores for cold functions.
+	def_bool $(cc-option, -fmin-function-alignment=8)
+
+config CC_HAS_SANE_FUNCTION_ALIGNMENT
+	# Set if the guaranteed alignment with -fmin-function-alignment is
+	# available or extra care is required in the kernel. Clang provides
+	# strict alignment always, even with -falign-functions.
+	def_bool CC_HAS_MIN_FUNCTION_ALIGNMENT || CC_IS_CLANG
+
+config ARCH_NEED_CMPXCHG_1_EMU
+	bool
+
+config ARCH_WANTS_PRE_LINK_VMLINUX
+	bool
+	help
+	  An architecture can select this if it provides arch/<arch>/tools/Makefile
+	  with .arch.vmlinux.o target to be linked into vmlinux.
+
+config ARCH_HAS_CPU_ATTACK_VECTORS
+	bool
+
 endmenu
diff --git a/arch/alpha/Kbuild b/arch/alpha/Kbuild
index c2302017403a..345d79df24bb 100644
--- a/arch/alpha/Kbuild
+++ b/arch/alpha/Kbuild
@@ -1,3 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0-only
 obj-y			+= kernel/ mm/
 obj-$(CONFIG_MATHEMU)	+= math-emu/
+
+# for cleaning
+subdir- += boot
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 4e87783c90ad..80367f2cf821 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -3,22 +3,23 @@ config ALPHA
 	bool
 	default y
 	select ARCH_32BIT_USTAT_F_TINODE
+	select ARCH_HAS_CURRENT_STACK_POINTER
+	select ARCH_HAS_DMA_OPS if PCI
 	select ARCH_MIGHT_HAVE_PC_PARPORT
 	select ARCH_MIGHT_HAVE_PC_SERIO
+	select ARCH_MODULE_NEEDS_WEAK_PER_CPU if SMP
 	select ARCH_NO_PREEMPT
 	select ARCH_NO_SG_CHAIN
 	select ARCH_USE_CMPXCHG_LOCKREF
-	select DMA_OPS if PCI
-	select FORCE_PCI if !ALPHA_JENSEN
+	select FORCE_PCI
 	select PCI_DOMAINS if PCI
 	select PCI_SYSCALL if PCI
-	select HAVE_AOUT
 	select HAVE_ASM_MODVERSIONS
+	select HAVE_PAGE_SIZE_8KB
 	select HAVE_PCSPKR_PLATFORM
 	select HAVE_PERF_EVENTS
 	select NEED_DMA_MAP_STATE
 	select NEED_SG_DMA_LENGTH
-	select VIRT_TO_BUS
 	select GENERIC_IRQ_PROBE
 	select GENERIC_PCI_IOMAP
 	select AUTO_IRQ_AFFINITY if SMP
@@ -28,14 +29,15 @@ config ALPHA
 	select AUDIT_ARCH
 	select GENERIC_CPU_VULNERABILITIES
 	select GENERIC_SMP_IDLE_THREAD
+	select HAS_IOPORT
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_MOD_ARCH_SPECIFIC
+	select LOCK_MM_AND_FIND_VMA
 	select MODULES_USE_ELF_RELA
 	select ODD_RT_SIGACTION
 	select OLD_SIGSUSPEND
 	select CPU_NO_EFFICIENT_FFS if !ALPHA_EV67
 	select MMU_GATHER_NO_RANGE
-	select SET_FS
 	select SPARSEMEM_EXTREME if SPARSEMEM
 	select ZONE_DMA
 	help
@@ -89,22 +91,11 @@ choice
 	  <http://www.alphalinux.org/>. In summary:
 
 	  Alcor/Alpha-XLT     AS 600, AS 500, XL-300, XL-366
-	  Alpha-XL            XL-233, XL-266
-	  AlphaBook1          Alpha laptop
-	  Avanti              AS 200, AS 205, AS 250, AS 255, AS 300, AS 400
-	  Cabriolet           AlphaPC64, AlphaPCI64
 	  DP264               DP264 / DS20 / ES40 / DS10 / DS10L
-	  EB164               EB164 21164 evaluation board
-	  EB64+               EB64+ 21064 evaluation board
-	  EB66                EB66 21066 evaluation board
-	  EB66+               EB66+ 21066 evaluation board
-	  Jensen              DECpc 150, DEC 2000 models 300, 500
 	  LX164               AlphaPC164-LX
-	  Lynx                AS 2100A
 	  Miata               Personal Workstation 433/500/600 a/au
 	  Marvel              AlphaServer ES47 / ES80 / GS1280
 	  Mikasa              AS 1000
-	  Noname              AXPpci33, UDB (Multia)
 	  Noritake            AS 1000A, AS 600A, AS 800
 	  PC164               AlphaPC164
 	  Rawhide             AS 1200, AS 4000, AS 4100
@@ -136,27 +127,6 @@ config ALPHA_ALCOR
 	  all the work required to support an external Bcache and to maintain
 	  memory coherence when a PCI device DMAs into (or out of) memory.
 
-config ALPHA_XL
-	bool "Alpha-XL"
-	help
-	  XL-233 and XL-266-based Alpha systems.
-
-config ALPHA_BOOK1
-	bool "AlphaBook1"
-	help
-	  Dec AlphaBook1/Burns Alpha-based laptops.
-
-config ALPHA_AVANTI_CH
-	bool "Avanti"
-
-config ALPHA_CABRIOLET
-	bool "Cabriolet"
-	help
-	  Cabriolet AlphaPC64, AlphaPCI64 systems.  Derived from EB64+ but now
-	  baby-AT with Flash boot ROM, no on-board SCSI or Ethernet. 3 ISA
-	  slots, 4 PCI slots (one pair are on a shared slot), uses plug-in
-	  Bcache SIMMs.  Requires power supply with 3.3V output.
-
 config ALPHA_DP264
 	bool "DP264"
 	help
@@ -164,62 +134,18 @@ config ALPHA_DP264
 	  API Networks: 264DP, UP2000(+), CS20;
 	  Compaq: DS10(E,L), XP900, XP1000, DS20(E), ES40.
 
-config ALPHA_EB164
-	bool "EB164"
-	help
-	  EB164 21164 evaluation board from DEC.  Uses 21164 and ALCOR.  Has
-	  ISA and PCI expansion (3 ISA slots, 2 64-bit PCI slots (one is
-	  shared with an ISA slot) and 2 32-bit PCI slots.  Uses plus-in
-	  Bcache SIMMs. I/O sub-system provides SuperI/O (2S, 1P, FD), KBD,
-	  MOUSE (PS2 style), RTC/NVRAM.  Boot ROM is Flash.  PC-AT-sized
-	  motherboard.  Requires power supply with 3.3V output.
-
-config ALPHA_EB64P_CH
-	bool "EB64+"
-
-config ALPHA_EB66
-	bool "EB66"
-	help
-	  A Digital DS group board.  Uses 21066 or 21066A.  I/O sub-system is
-	  identical to EB64+.  Baby PC-AT size.  Runs from standard PC power
-	  supply.  The EB66 schematic was published as a marketing poster
-	  advertising the 21066 as "the first microprocessor in the world with
-	  embedded PCI".
-
-config ALPHA_EB66P
-	bool "EB66+"
-	help
-	  Later variant of the EB66 board.
-
 config ALPHA_EIGER
 	bool "Eiger"
 	help
 	  Apparently an obscure OEM single-board computer based on the
 	  Typhoon/Tsunami chipset family. Information on it is scanty.
 
-config ALPHA_JENSEN
-	bool "Jensen"
-	select HAVE_EISA
-	help
-	  DEC PC 150 AXP (aka Jensen): This is a very old Digital system - one
-	  of the first-generation Alpha systems. A number of these systems
-	  seem to be available on the second- hand market. The Jensen is a
-	  floor-standing tower system which originally used a 150MHz 21064 It
-	  used programmable logic to interface a 486 EISA I/O bridge to the
-	  CPU.
-
 config ALPHA_LX164
 	bool "LX164"
 	help
 	  A technical overview of this board is available at
 	  <http://www.unix-ag.org/Linux-Alpha/Architectures/LX164.html>.
 
-config ALPHA_LYNX
-	bool "Lynx"
-	select HAVE_EISA
-	help
-	  AlphaServer 2100A-based systems.
-
 config ALPHA_MARVEL
 	bool "Marvel"
 	help
@@ -242,9 +168,6 @@ config ALPHA_NAUTILUS
 	help
 	  Alpha systems based on the AMD 751 & ALI 1543C chipsets.
 
-config ALPHA_NONAME_CH
-	bool "Noname"
-
 config ALPHA_NORITAKE
 	bool "Noritake"
 	select HAVE_EISA
@@ -255,9 +178,6 @@ config ALPHA_NORITAKE
 config ALPHA_PC164
 	bool "PC164"
 
-config ALPHA_P2K
-	bool "Platform2000"
-
 config ALPHA_RAWHIDE
 	bool "Rawhide"
 	select HAVE_EISA
@@ -321,91 +241,18 @@ config ISA_DMA_API
 	bool
 	default y
 
-config ALPHA_NONAME
-	bool
-	depends on ALPHA_BOOK1 || ALPHA_NONAME_CH
-	default y
-	help
-	  The AXPpci33 (aka NoName), is based on the EB66 (includes the Multia
-	  UDB).  This design was produced by Digital's Technical OEM (TOEM)
-	  group. It uses the 21066 processor running at 166MHz or 233MHz. It
-	  is a baby-AT size, and runs from a standard PC power supply. It has
-	  5 ISA slots and 3 PCI slots (one pair are a shared slot). There are
-	  2 versions, with either PS/2 or large DIN connectors for the
-	  keyboard.
-
-config ALPHA_EV4
-	bool
-	depends on ALPHA_JENSEN || (ALPHA_SABLE && !ALPHA_GAMMA) || ALPHA_LYNX || ALPHA_NORITAKE && !ALPHA_PRIMO || ALPHA_MIKASA && !ALPHA_PRIMO || ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P_CH || ALPHA_XL || ALPHA_NONAME || ALPHA_EB66 || ALPHA_EB66P || ALPHA_P2K
-	default y if !ALPHA_LYNX
-
-config ALPHA_LCA
-	bool
-	depends on ALPHA_NONAME || ALPHA_EB66 || ALPHA_EB66P || ALPHA_P2K
-	default y
-
-config ALPHA_APECS
-	bool
-	depends on !ALPHA_PRIMO && (ALPHA_NORITAKE || ALPHA_MIKASA) || ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P_CH || ALPHA_XL
-	default y
-
-config ALPHA_EB64P
-	bool
-	depends on ALPHA_CABRIOLET || ALPHA_EB64P_CH
-	default y
-	help
-	  Uses 21064 or 21064A and APECs.  Has ISA and PCI expansion (3 ISA,
-	  2 PCI, one pair are on a shared slot). Supports 36-bit DRAM SIMs.
-	  ISA bus generated by Intel SaturnI/O PCI-ISA bridge. On-board SCSI
-	  (NCR 810 on PCI) Ethernet (Digital 21040), KBD, MOUSE (PS2 style),
-	  SuperI/O (2S, 1P, FD), RTC/NVRAM. Boot ROM is EPROM.  PC-AT size.
-	  Runs from standard PC power supply.
-
-config ALPHA_EV5
-	bool "EV5 CPU(s) (model 5/xxx)?" if ALPHA_LYNX
-	default y if ALPHA_RX164 || ALPHA_RAWHIDE || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_SABLE && ALPHA_GAMMA || ALPHA_NORITAKE && ALPHA_PRIMO || ALPHA_MIKASA && ALPHA_PRIMO || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR
-
-config ALPHA_EV4
-	bool
-	default y if ALPHA_LYNX && !ALPHA_EV5
-
 config ALPHA_CIA
 	bool
-	depends on ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_NORITAKE && ALPHA_PRIMO || ALPHA_MIKASA && ALPHA_PRIMO || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR
+	depends on ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_NORITAKE || ALPHA_MIKASA || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_ALCOR
 	default y
 
 config ALPHA_EV56
-	bool "EV56 CPU (speed >= 366MHz)?" if ALPHA_ALCOR
-	default y if ALPHA_RX164 || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_PC164 || ALPHA_TAKARA
-
-config ALPHA_EV56
-	prompt "EV56 CPU (speed >= 333MHz)?"
-	depends on ALPHA_NORITAKE || ALPHA_PRIMO
-
-config ALPHA_EV56
-	prompt "EV56 CPU (speed >= 400MHz)?"
-	depends on ALPHA_RAWHIDE
-
-config ALPHA_PRIMO
-	bool "EV5 CPU daughtercard (model 5/xxx)?"
-	depends on ALPHA_NORITAKE || ALPHA_MIKASA
-	help
-	  Say Y if you have an AS 1000 5/xxx or an AS 1000A 5/xxx.
-
-config ALPHA_GAMMA
-	bool "EV5 CPU(s) (model 5/xxx)?"
-	depends on ALPHA_SABLE
-	help
-	  Say Y if you have an AS 2000 5/xxx or an AS 2100 5/xxx.
-
-config ALPHA_GAMMA
 	bool
-	depends on ALPHA_LYNX
-	default y
+	default y if ALPHA_ALCOR || ALPHA_RX164 || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_NORITAKE || ALPHA_MIKASA || ALPHA_RAWHIDE || ALPHA_SABLE
 
 config ALPHA_T2
 	bool
-	depends on ALPHA_SABLE || ALPHA_LYNX
+	depends on ALPHA_SABLE
 	default y
 
 config ALPHA_PYXIS
@@ -449,15 +296,6 @@ config GENERIC_HWEIGHT
 	bool
 	default y if !ALPHA_EV67
 
-config ALPHA_AVANTI
-	bool
-	depends on ALPHA_XL || ALPHA_AVANTI_CH
-	default y
-	help
-	  Avanti AS 200, AS 205, AS 250, AS 255, AS 300, and AS 400-based
-	  Alphas. Info at
-	  <http://www.unix-ag.org/Linux-Alpha/Architectures/Avanti.html>.
-
 config ALPHA_BROKEN_IRQ_MASK
 	bool
 	depends on ALPHA_GENERIC || ALPHA_PC164
@@ -487,9 +325,9 @@ config ALPHA_QEMU
 
 
 config ALPHA_SRM
-	bool "Use SRM as bootloader" if ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_NAUTILUS || ALPHA_NONAME
+	bool "Use SRM as bootloader" if ALPHA_PC164 || ALPHA_TAKARA || ALPHA_ALCOR || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_NAUTILUS
 	depends on TTY
-	default y if ALPHA_JENSEN || ALPHA_MIKASA || ALPHA_SABLE || ALPHA_LYNX || ALPHA_NORITAKE || ALPHA_DP264 || ALPHA_RAWHIDE || ALPHA_EIGER || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_MARVEL
+	default y if ALPHA_MIKASA || ALPHA_SABLE || ALPHA_NORITAKE || ALPHA_DP264 || ALPHA_RAWHIDE || ALPHA_EIGER || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_MARVEL
 	help
 	  There are two different types of booting firmware on Alphas: SRM,
 	  which is command line driven, and ARC, which uses menus and arrow
@@ -515,7 +353,7 @@ config ARCH_MAY_HAVE_PC_FDC
 
 config SMP
 	bool "Symmetric multi-processing support"
-	depends on ALPHA_SABLE || ALPHA_LYNX || ALPHA_RAWHIDE || ALPHA_DP264 || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_GENERIC || ALPHA_SHARK || ALPHA_MARVEL
+	depends on ALPHA_SABLE || ALPHA_RAWHIDE || ALPHA_DP264 || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_GENERIC || ALPHA_SHARK || ALPHA_MARVEL
 	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, say N. If you have a system with more
@@ -551,7 +389,7 @@ config ARCH_SPARSEMEM_ENABLE
 config ALPHA_WTINT
 	bool "Use WTINT" if ALPHA_SRM || ALPHA_GENERIC
 	default y if ALPHA_QEMU
-	default n if ALPHA_EV5 || ALPHA_EV56 || (ALPHA_EV4 && !ALPHA_LCA)
+	default n if ALPHA_EV56
 	default n if !ALPHA_SRM && !ALPHA_GENERIC
 	default y if SMP
 	help
diff --git a/arch/alpha/Makefile b/arch/alpha/Makefile
index 52529ee42dac..35445ff2e489 100644
--- a/arch/alpha/Makefile
+++ b/arch/alpha/Makefile
@@ -15,18 +15,14 @@ CHECKFLAGS	+= -D__alpha__
 cflags-y	:= -pipe -mno-fp-regs -ffixed-8
 cflags-y	+= $(call cc-option, -fno-jump-tables)
 
-cpuflags-$(CONFIG_ALPHA_EV4)		:= -mcpu=ev4
-cpuflags-$(CONFIG_ALPHA_EV5)		:= -mcpu=ev5
 cpuflags-$(CONFIG_ALPHA_EV56)		:= -mcpu=ev56
 cpuflags-$(CONFIG_ALPHA_POLARIS)	:= -mcpu=pca56
 cpuflags-$(CONFIG_ALPHA_SX164)		:= -mcpu=pca56
 cpuflags-$(CONFIG_ALPHA_EV6)		:= -mcpu=ev6
 cpuflags-$(CONFIG_ALPHA_EV67)		:= -mcpu=ev67
 # If GENERIC, make sure to turn off any instruction set extensions that
-# the host compiler might have on by default.  Given that EV4 and EV5
-# have the same instruction set, prefer EV5 because an EV5 schedule is
-# more likely to keep an EV4 processor busy than vice-versa.
-cpuflags-$(CONFIG_ALPHA_GENERIC)	:= -mcpu=ev5
+# the host compiler might have on by default.
+cpuflags-$(CONFIG_ALPHA_GENERIC)	:= -mcpu=ev56 -mtune=ev6
 
 cflags-y				+= $(cpuflags-y)
 
@@ -36,8 +32,6 @@ cflags-y				+= $(cpuflags-y)
 # BWX is most important, but we don't really want any emulation ever.
 KBUILD_CFLAGS += $(cflags-y) -Wa,-mev6
 
-head-y := arch/alpha/kernel/head.o
-
 libs-y				+= arch/alpha/lib/
 
 # export what is needed by arch/alpha/boot/Makefile
@@ -55,9 +49,6 @@ $(boot)/vmlinux.gz: vmlinux
 bootimage bootpfile bootpzfile: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 
-archclean:
-	$(Q)$(MAKE) $(clean)=$(boot)
-
 archheaders:
 	$(Q)$(MAKE) $(build)=arch/alpha/kernel/syscalls all
 
diff --git a/arch/alpha/boot/bootp.c b/arch/alpha/boot/bootp.c
index b4faba2432d5..842e85776cc0 100644
--- a/arch/alpha/boot/bootp.c
+++ b/arch/alpha/boot/bootp.c
@@ -18,7 +18,7 @@
 #include <asm/hwrpb.h>
 #include <asm/io.h>
 
-#include <stdarg.h>
+#include <linux/stdarg.h>
 
 #include "ksize.h"
 
diff --git a/arch/alpha/boot/bootpz.c b/arch/alpha/boot/bootpz.c
index 90a2b341e9c0..c6079308eab3 100644
--- a/arch/alpha/boot/bootpz.c
+++ b/arch/alpha/boot/bootpz.c
@@ -20,7 +20,7 @@
 #include <asm/hwrpb.h>
 #include <asm/io.h>
 
-#include <stdarg.h>
+#include <linux/stdarg.h>
 
 #include "kzsize.h"
 
diff --git a/arch/alpha/boot/main.c b/arch/alpha/boot/main.c
index e5347a080008..22a1cb0264af 100644
--- a/arch/alpha/boot/main.c
+++ b/arch/alpha/boot/main.c
@@ -15,7 +15,7 @@
 #include <asm/console.h>
 #include <asm/hwrpb.h>
 
-#include <stdarg.h>
+#include <linux/stdarg.h>
 
 #include "ksize.h"
 
diff --git a/arch/alpha/boot/misc.c b/arch/alpha/boot/misc.c
index 325d4dd4f904..1ab91852d9f7 100644
--- a/arch/alpha/boot/misc.c
+++ b/arch/alpha/boot/misc.c
@@ -89,8 +89,6 @@ static ulg output_ptr;
 static ulg bytes_out;
 
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 extern int end;
 static ulg free_mem_ptr;
diff --git a/arch/alpha/boot/stdio.c b/arch/alpha/boot/stdio.c
index 60f73ccd2e89..faa5234b90b8 100644
--- a/arch/alpha/boot/stdio.c
+++ b/arch/alpha/boot/stdio.c
@@ -2,8 +2,8 @@
 /*
  * Copyright (C) Paul Mackerras 1997.
  */
-#include <stdarg.h>
-#include <stddef.h>
+#include <linux/string.h>
+#include <linux/stdarg.h>
 
 size_t strnlen(const char * s, size_t count)
 {
@@ -42,8 +42,8 @@ static int skip_atoi(const char **s)
 
 static char * number(char * str, unsigned long long num, int base, int size, int precision, int type)
 {
-	char c,sign,tmp[66];
-	const char *digits="0123456789abcdefghijklmnopqrstuvwxyz";
+	char c, sign, tmp[66];
+	const char *digits = "0123456789abcdefghijklmnopqrstuvwxyz";
 	int i;
 
 	if (type & LARGE)
@@ -83,14 +83,14 @@ static char * number(char * str, unsigned long long num, int base, int size, int
 		precision = i;
 	size -= precision;
 	if (!(type&(ZEROPAD+LEFT)))
-		while(size-->0)
+		while (size-- > 0)
 			*str++ = ' ';
 	if (sign)
 		*str++ = sign;
 	if (type & SPECIAL) {
 		if (base==8)
 			*str++ = '0';
-		else if (base==16) {
+		else if (base == 16) {
 			*str++ = '0';
 			*str++ = digits[33];
 		}
@@ -125,7 +125,7 @@ int vsprintf(char *buf, const char *fmt, va_list args)
 				/* 'z' changed to 'Z' --davidm 1/25/99 */
 
 
-	for (str=buf ; *fmt ; ++fmt) {
+	for (str = buf ; *fmt ; ++fmt) {
 		if (*fmt != '%') {
 			*str++ = *fmt;
 			continue;
@@ -296,7 +296,7 @@ int sprintf(char * buf, const char *fmt, ...)
 	int i;
 
 	va_start(args, fmt);
-	i=vsprintf(buf,fmt,args);
+	i = vsprintf(buf, fmt, args);
 	va_end(args);
 	return i;
 }
diff --git a/arch/alpha/boot/tools/objstrip.c b/arch/alpha/boot/tools/objstrip.c
index 08b430d25a31..7cf92d172dce 100644
--- a/arch/alpha/boot/tools/objstrip.c
+++ b/arch/alpha/boot/tools/objstrip.c
@@ -148,7 +148,7 @@ main (int argc, char *argv[])
 #ifdef __ELF__
     elf = (struct elfhdr *) buf;
 
-    if (elf->e_ident[0] == 0x7f && str_has_prefix((char *)elf->e_ident + 1, "ELF")) {
+    if (memcmp(&elf->e_ident[EI_MAG0], ELFMAG, SELFMAG) == 0) {
 	if (elf->e_type != ET_EXEC) {
 	    fprintf(stderr, "%s: %s is not an ELF executable\n",
 		    prog_name, inname);
diff --git a/arch/alpha/configs/defconfig b/arch/alpha/configs/defconfig
index 7f1ca30b115b..3280bd9e6578 100644
--- a/arch/alpha/configs/defconfig
+++ b/arch/alpha/configs/defconfig
@@ -39,21 +39,18 @@ CONFIG_PATA_CYPRESS=y
 CONFIG_ATA_GENERIC=y
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
-CONFIG_NET_ETHERNET=y
 CONFIG_NET_VENDOR_3COM=y
 CONFIG_VORTEX=y
 CONFIG_NET_TULIP=y
 CONFIG_DE2104X=m
 CONFIG_TULIP=y
 CONFIG_TULIP_MMIO=y
-CONFIG_NET_PCI=y
 CONFIG_YELLOWFIN=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_CMOS=y
 CONFIG_EXT2_FS=y
-CONFIG_REISERFS_FS=m
 CONFIG_ISO9660_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
@@ -62,11 +59,10 @@ CONFIG_TMPFS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_ALPHA_LEGACY_START_ADDRESS=y
 CONFIG_MATHEMU=y
 CONFIG_CRYPTO_HMAC=y
diff --git a/arch/alpha/include/asm/Kbuild b/arch/alpha/include/asm/Kbuild
index 42911c8340c7..483965c5a4de 100644
--- a/arch/alpha/include/asm/Kbuild
+++ b/arch/alpha/include/asm/Kbuild
@@ -1,6 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 
 generated-y += syscall_table.h
-generic-y += export.h
+generic-y += agp.h
+generic-y += asm-offsets.h
 generic-y += kvm_para.h
 generic-y += mcs_spinlock.h
+generic-y += text-patching.h
diff --git a/arch/alpha/include/asm/a.out.h b/arch/alpha/include/asm/a.out.h
deleted file mode 100644
index d2346b7caff1..000000000000
--- a/arch/alpha/include/asm/a.out.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ALPHA_A_OUT_H__
-#define __ALPHA_A_OUT_H__
-
-#include <uapi/asm/a.out.h>
-
-
-/* Assume that start addresses below 4G belong to a TASO application.
-   Unfortunately, there is no proper bit in the exec header to check.
-   Worse, we have to notice the start address before swapping to use
-   /sbin/loader, which of course is _not_ a TASO application.  */
-#define SET_AOUT_PERSONALITY(BFPM, EX) \
-	set_personality (((BFPM->taso || EX.ah.entry < 0x100000000L \
-			   ? ADDR_LIMIT_32BIT : 0) | PER_OSF4))
-
-#endif /* __A_OUT_GNU_H__ */
diff --git a/arch/alpha/include/asm/agp.h b/arch/alpha/include/asm/agp.h
deleted file mode 100644
index 7874f063d000..000000000000
--- a/arch/alpha/include/asm/agp.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef AGP_H
-#define AGP_H 1
-
-#include <asm/io.h>
-
-/* dummy for now */
-
-#define map_page_into_agp(page)		do { } while (0)
-#define unmap_page_from_agp(page)	do { } while (0)
-#define flush_agp_cache() mb()
-
-/* GATT allocation. Returns/accepts GATT kernel virtual address. */
-#define alloc_gatt_pages(order)		\
-	((char *)__get_free_pages(GFP_KERNEL, (order)))
-#define free_gatt_pages(table, order)	\
-	free_pages((unsigned long)(table), (order))
-
-#endif
diff --git a/arch/alpha/include/asm/asm-offsets.h b/arch/alpha/include/asm/asm-offsets.h
deleted file mode 100644
index d370ee36a182..000000000000
--- a/arch/alpha/include/asm/asm-offsets.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <generated/asm-offsets.h>
diff --git a/arch/alpha/include/asm/atomic.h b/arch/alpha/include/asm/atomic.h
index f2861a43a61e..cbd9244571af 100644
--- a/arch/alpha/include/asm/atomic.h
+++ b/arch/alpha/include/asm/atomic.h
@@ -200,25 +200,6 @@ ATOMIC_OPS(xor, xor)
 #undef ATOMIC_OP_RETURN
 #undef ATOMIC_OP
 
-#define arch_atomic64_cmpxchg(v, old, new) \
-	(arch_cmpxchg(&((v)->counter), old, new))
-#define arch_atomic64_xchg(v, new) \
-	(arch_xchg(&((v)->counter), new))
-
-#define arch_atomic_cmpxchg(v, old, new) \
-	(arch_cmpxchg(&((v)->counter), old, new))
-#define arch_atomic_xchg(v, new) \
-	(arch_xchg(&((v)->counter), new))
-
-/**
- * arch_atomic_fetch_add_unless - add unless the number is a given value
- * @v: pointer of type atomic_t
- * @a: the amount to add to v...
- * @u: ...unless v is equal to u.
- *
- * Atomically adds @a to @v, so long as it was not @u.
- * Returns the old value of @v.
- */
 static __inline__ int arch_atomic_fetch_add_unless(atomic_t *v, int a, int u)
 {
 	int c, new, old;
@@ -242,15 +223,6 @@ static __inline__ int arch_atomic_fetch_add_unless(atomic_t *v, int a, int u)
 }
 #define arch_atomic_fetch_add_unless arch_atomic_fetch_add_unless
 
-/**
- * arch_atomic64_fetch_add_unless - add unless the number is a given value
- * @v: pointer of type atomic64_t
- * @a: the amount to add to v...
- * @u: ...unless v is equal to u.
- *
- * Atomically adds @a to @v, so long as it was not @u.
- * Returns the old value of @v.
- */
 static __inline__ s64 arch_atomic64_fetch_add_unless(atomic64_t *v, s64 a, s64 u)
 {
 	s64 c, new, old;
@@ -274,13 +246,6 @@ static __inline__ s64 arch_atomic64_fetch_add_unless(atomic64_t *v, s64 a, s64 u
 }
 #define arch_atomic64_fetch_add_unless arch_atomic64_fetch_add_unless
 
-/*
- * arch_atomic64_dec_if_positive - decrement by 1 if old value positive
- * @v: pointer of type atomic_t
- *
- * The function returns the old value of *v minus 1, even if
- * the atomic variable, v, was not decremented.
- */
 static inline s64 arch_atomic64_dec_if_positive(atomic64_t *v)
 {
 	s64 old, tmp;
diff --git a/arch/alpha/include/asm/bitops.h b/arch/alpha/include/asm/bitops.h
index 5adca78830b5..76e4343c090f 100644
--- a/arch/alpha/include/asm/bitops.h
+++ b/arch/alpha/include/asm/bitops.h
@@ -46,8 +46,8 @@ set_bit(unsigned long nr, volatile void * addr)
 /*
  * WARNING: non atomic version.
  */
-static inline void
-__set_bit(unsigned long nr, volatile void * addr)
+static __always_inline void
+arch___set_bit(unsigned long nr, volatile unsigned long *addr)
 {
 	int *m = ((int *) addr) + (nr >> 5);
 
@@ -82,8 +82,8 @@ clear_bit_unlock(unsigned long nr, volatile void * addr)
 /*
  * WARNING: non atomic version.
  */
-static __inline__ void
-__clear_bit(unsigned long nr, volatile void * addr)
+static __always_inline void
+arch___clear_bit(unsigned long nr, volatile unsigned long *addr)
 {
 	int *m = ((int *) addr) + (nr >> 5);
 
@@ -94,7 +94,7 @@ static inline void
 __clear_bit_unlock(unsigned long nr, volatile void * addr)
 {
 	smp_mb();
-	__clear_bit(nr, addr);
+	arch___clear_bit(nr, addr);
 }
 
 static inline void
@@ -118,8 +118,8 @@ change_bit(unsigned long nr, volatile void * addr)
 /*
  * WARNING: non atomic version.
  */
-static __inline__ void
-__change_bit(unsigned long nr, volatile void * addr)
+static __always_inline void
+arch___change_bit(unsigned long nr, volatile unsigned long *addr)
 {
 	int *m = ((int *) addr) + (nr >> 5);
 
@@ -186,8 +186,8 @@ test_and_set_bit_lock(unsigned long nr, volatile void *addr)
 /*
  * WARNING: non atomic version.
  */
-static inline int
-__test_and_set_bit(unsigned long nr, volatile void * addr)
+static __always_inline bool
+arch___test_and_set_bit(unsigned long nr, volatile unsigned long *addr)
 {
 	unsigned long mask = 1 << (nr & 0x1f);
 	int *m = ((int *) addr) + (nr >> 5);
@@ -230,8 +230,8 @@ test_and_clear_bit(unsigned long nr, volatile void * addr)
 /*
  * WARNING: non atomic version.
  */
-static inline int
-__test_and_clear_bit(unsigned long nr, volatile void * addr)
+static __always_inline bool
+arch___test_and_clear_bit(unsigned long nr, volatile unsigned long *addr)
 {
 	unsigned long mask = 1 << (nr & 0x1f);
 	int *m = ((int *) addr) + (nr >> 5);
@@ -272,8 +272,8 @@ test_and_change_bit(unsigned long nr, volatile void * addr)
 /*
  * WARNING: non atomic version.
  */
-static __inline__ int
-__test_and_change_bit(unsigned long nr, volatile void * addr)
+static __always_inline bool
+arch___test_and_change_bit(unsigned long nr, volatile unsigned long *addr)
 {
 	unsigned long mask = 1 << (nr & 0x1f);
 	int *m = ((int *) addr) + (nr >> 5);
@@ -283,10 +283,27 @@ __test_and_change_bit(unsigned long nr, volatile void * addr)
 	return (old & mask) != 0;
 }
 
-static inline int
-test_bit(int nr, const volatile void * addr)
+#define arch_test_bit generic_test_bit
+#define arch_test_bit_acquire generic_test_bit_acquire
+
+static inline bool xor_unlock_is_negative_byte(unsigned long mask,
+		volatile unsigned long *p)
 {
-	return (1UL & (((const int *) addr)[nr >> 5] >> (nr & 31))) != 0UL;
+	unsigned long temp, old;
+
+	__asm__ __volatile__(
+	"1:	ldl_l %0,%4\n"
+	"	mov %0,%2\n"
+	"	xor %0,%3,%0\n"
+	"	stl_c %0,%1\n"
+	"	beq %0,2f\n"
+	".subsection 2\n"
+	"2:	br 1b\n"
+	".previous"
+	:"=&r" (temp), "=m" (*p), "=&r" (old)
+	:"Ir" (mask), "m" (*p));
+
+	return (old & BIT(7)) != 0;
 }
 
 /*
@@ -311,7 +328,7 @@ static inline unsigned long ffz_b(unsigned long x)
 	return sum;
 }
 
-static inline unsigned long ffz(unsigned long word)
+static inline unsigned long __attribute_const__ ffz(unsigned long word)
 {
 #if defined(CONFIG_ALPHA_EV6) && defined(CONFIG_ALPHA_EV67)
 	/* Whee.  EV67 can calculate it directly.  */
@@ -331,7 +348,7 @@ static inline unsigned long ffz(unsigned long word)
 /*
  * __ffs = Find First set bit in word.  Undefined if no set bit exists.
  */
-static inline unsigned long __ffs(unsigned long word)
+static inline __attribute_const__ unsigned long __ffs(unsigned long word)
 {
 #if defined(CONFIG_ALPHA_EV6) && defined(CONFIG_ALPHA_EV67)
 	/* Whee.  EV67 can calculate it directly.  */
@@ -356,7 +373,7 @@ static inline unsigned long __ffs(unsigned long word)
  * differs in spirit from the above __ffs.
  */
 
-static inline int ffs(int word)
+static inline __attribute_const__ int ffs(int word)
 {
 	int result = __ffs(word) + 1;
 	return word ? result : 0;
@@ -366,14 +383,14 @@ static inline int ffs(int word)
  * fls: find last bit set.
  */
 #if defined(CONFIG_ALPHA_EV6) && defined(CONFIG_ALPHA_EV67)
-static inline int fls64(unsigned long word)
+static inline __attribute_const__ int fls64(unsigned long word)
 {
 	return 64 - __kernel_ctlz(word);
 }
 #else
 extern const unsigned char __flsm1_tab[256];
 
-static inline int fls64(unsigned long x)
+static inline __attribute_const__ int fls64(unsigned long x)
 {
 	unsigned long t, a, r;
 
@@ -386,12 +403,12 @@ static inline int fls64(unsigned long x)
 }
 #endif
 
-static inline unsigned long __fls(unsigned long x)
+static inline __attribute_const__ unsigned long __fls(unsigned long x)
 {
 	return fls64(x) - 1;
 }
 
-static inline int fls(unsigned int x)
+static inline __attribute_const__ int fls(unsigned int x)
 {
 	return fls64(x);
 }
@@ -430,8 +447,6 @@ static inline unsigned int __arch_hweight8(unsigned int w)
 
 #endif /* __KERNEL__ */
 
-#include <asm-generic/bitops/find.h>
-
 #ifdef __KERNEL__
 
 /*
@@ -452,6 +467,8 @@ sched_find_first_bit(const unsigned long b[2])
 	return __ffs(tmp) + ofs;
 }
 
+#include <asm-generic/bitops/non-instrumented-non-atomic.h>
+
 #include <asm-generic/bitops/le.h>
 
 #include <asm-generic/bitops/ext2-atomic-setbit.h>
diff --git a/arch/alpha/include/asm/bugs.h b/arch/alpha/include/asm/bugs.h
deleted file mode 100644
index 78030d1c7e7e..000000000000
--- a/arch/alpha/include/asm/bugs.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  include/asm-alpha/bugs.h
- *
- *  Copyright (C) 1994  Linus Torvalds
- */
-
-/*
- * This is included by init/main.c to check for architecture-dependent bugs.
- *
- * Needs:
- *	void check_bugs(void);
- */
-
-/*
- * I don't know of any alpha bugs yet.. Nice chip
- */
-
-static void check_bugs(void)
-{
-}
diff --git a/arch/alpha/include/asm/cacheflush.h b/arch/alpha/include/asm/cacheflush.h
index 9945ff483eaf..36a7e924c3b9 100644
--- a/arch/alpha/include/asm/cacheflush.h
+++ b/arch/alpha/include/asm/cacheflush.h
@@ -53,9 +53,16 @@ extern void flush_icache_user_page(struct vm_area_struct *vma,
 #define flush_icache_user_page flush_icache_user_page
 #endif /* CONFIG_SMP */
 
-/* This is used only in __do_fault and do_swap_page.  */
-#define flush_icache_page(vma, page) \
-	flush_icache_user_page((vma), (page), 0, 0)
+/*
+ * Both implementations of flush_icache_user_page flush the entire
+ * address space, so one call, no matter how many pages.
+ */
+static inline void flush_icache_pages(struct vm_area_struct *vma,
+		struct page *page, unsigned int nr)
+{
+	flush_icache_user_page(vma, page, 0, 0);
+}
+#define flush_icache_pages flush_icache_pages
 
 #include <asm-generic/cacheflush.h>
 
diff --git a/arch/alpha/include/asm/cmpxchg.h b/arch/alpha/include/asm/cmpxchg.h
index 6e0a850aa9d3..ae1b96479d0c 100644
--- a/arch/alpha/include/asm/cmpxchg.h
+++ b/arch/alpha/include/asm/cmpxchg.h
@@ -3,25 +3,240 @@
 #define _ALPHA_CMPXCHG_H
 
 /*
- * Atomic exchange routines.
+ * Atomic exchange.
+ * Since it can be used to implement critical sections
+ * it must clobber "memory" (also for interrupts in UP).
  */
 
-#define ____xchg(type, args...)		__xchg ## type ## _local(args)
-#define ____cmpxchg(type, args...)	__cmpxchg ## type ## _local(args)
-#include <asm/xchg.h>
+static inline unsigned long
+____xchg_u8(volatile char *m, unsigned long val)
+{
+	unsigned long ret, tmp, addr64;
+
+	__asm__ __volatile__(
+	"	andnot	%4,7,%3\n"
+	"	insbl	%1,%4,%1\n"
+	"1:	ldq_l	%2,0(%3)\n"
+	"	extbl	%2,%4,%0\n"
+	"	mskbl	%2,%4,%2\n"
+	"	or	%1,%2,%2\n"
+	"	stq_c	%2,0(%3)\n"
+	"	beq	%2,2f\n"
+	".subsection 2\n"
+	"2:	br	1b\n"
+	".previous"
+	: "=&r" (ret), "=&r" (val), "=&r" (tmp), "=&r" (addr64)
+	: "r" ((long)m), "1" (val) : "memory");
+
+	return ret;
+}
+
+static inline unsigned long
+____xchg_u16(volatile short *m, unsigned long val)
+{
+	unsigned long ret, tmp, addr64;
+
+	__asm__ __volatile__(
+	"	andnot	%4,7,%3\n"
+	"	inswl	%1,%4,%1\n"
+	"1:	ldq_l	%2,0(%3)\n"
+	"	extwl	%2,%4,%0\n"
+	"	mskwl	%2,%4,%2\n"
+	"	or	%1,%2,%2\n"
+	"	stq_c	%2,0(%3)\n"
+	"	beq	%2,2f\n"
+	".subsection 2\n"
+	"2:	br	1b\n"
+	".previous"
+	: "=&r" (ret), "=&r" (val), "=&r" (tmp), "=&r" (addr64)
+	: "r" ((long)m), "1" (val) : "memory");
+
+	return ret;
+}
+
+static inline unsigned long
+____xchg_u32(volatile int *m, unsigned long val)
+{
+	unsigned long dummy;
+
+	__asm__ __volatile__(
+	"1:	ldl_l %0,%4\n"
+	"	bis $31,%3,%1\n"
+	"	stl_c %1,%2\n"
+	"	beq %1,2f\n"
+	".subsection 2\n"
+	"2:	br 1b\n"
+	".previous"
+	: "=&r" (val), "=&r" (dummy), "=m" (*m)
+	: "rI" (val), "m" (*m) : "memory");
+
+	return val;
+}
+
+static inline unsigned long
+____xchg_u64(volatile long *m, unsigned long val)
+{
+	unsigned long dummy;
+
+	__asm__ __volatile__(
+	"1:	ldq_l %0,%4\n"
+	"	bis $31,%3,%1\n"
+	"	stq_c %1,%2\n"
+	"	beq %1,2f\n"
+	".subsection 2\n"
+	"2:	br 1b\n"
+	".previous"
+	: "=&r" (val), "=&r" (dummy), "=m" (*m)
+	: "rI" (val), "m" (*m) : "memory");
+
+	return val;
+}
+
+/* This function doesn't exist, so you'll get a linker error
+   if something tries to do an invalid xchg().  */
+extern void __xchg_called_with_bad_pointer(void);
+
+static __always_inline unsigned long
+____xchg(volatile void *ptr, unsigned long x, int size)
+{
+	return
+		size == 1 ? ____xchg_u8(ptr, x) :
+		size == 2 ? ____xchg_u16(ptr, x) :
+		size == 4 ? ____xchg_u32(ptr, x) :
+		size == 8 ? ____xchg_u64(ptr, x) :
+			(__xchg_called_with_bad_pointer(), x);
+}
+
+/*
+ * Atomic compare and exchange.  Compare OLD with MEM, if identical,
+ * store NEW in MEM.  Return the initial value in MEM.  Success is
+ * indicated by comparing RETURN with OLD.
+ */
+
+static inline unsigned long
+____cmpxchg_u8(volatile char *m, unsigned char old, unsigned char new)
+{
+	unsigned long prev, tmp, cmp, addr64;
+
+	__asm__ __volatile__(
+	"	andnot	%5,7,%4\n"
+	"	insbl	%1,%5,%1\n"
+	"1:	ldq_l	%2,0(%4)\n"
+	"	extbl	%2,%5,%0\n"
+	"	cmpeq	%0,%6,%3\n"
+	"	beq	%3,2f\n"
+	"	mskbl	%2,%5,%2\n"
+	"	or	%1,%2,%2\n"
+	"	stq_c	%2,0(%4)\n"
+	"	beq	%2,3f\n"
+	"2:\n"
+	".subsection 2\n"
+	"3:	br	1b\n"
+	".previous"
+	: "=&r" (prev), "=&r" (new), "=&r" (tmp), "=&r" (cmp), "=&r" (addr64)
+	: "r" ((long)m), "Ir" (old), "1" (new) : "memory");
+
+	return prev;
+}
+
+static inline unsigned long
+____cmpxchg_u16(volatile short *m, unsigned short old, unsigned short new)
+{
+	unsigned long prev, tmp, cmp, addr64;
+
+	__asm__ __volatile__(
+	"	andnot	%5,7,%4\n"
+	"	inswl	%1,%5,%1\n"
+	"1:	ldq_l	%2,0(%4)\n"
+	"	extwl	%2,%5,%0\n"
+	"	cmpeq	%0,%6,%3\n"
+	"	beq	%3,2f\n"
+	"	mskwl	%2,%5,%2\n"
+	"	or	%1,%2,%2\n"
+	"	stq_c	%2,0(%4)\n"
+	"	beq	%2,3f\n"
+	"2:\n"
+	".subsection 2\n"
+	"3:	br	1b\n"
+	".previous"
+	: "=&r" (prev), "=&r" (new), "=&r" (tmp), "=&r" (cmp), "=&r" (addr64)
+	: "r" ((long)m), "Ir" (old), "1" (new) : "memory");
+
+	return prev;
+}
+
+static inline unsigned long
+____cmpxchg_u32(volatile int *m, int old, int new)
+{
+	unsigned long prev, cmp;
+
+	__asm__ __volatile__(
+	"1:	ldl_l %0,%5\n"
+	"	cmpeq %0,%3,%1\n"
+	"	beq %1,2f\n"
+	"	mov %4,%1\n"
+	"	stl_c %1,%2\n"
+	"	beq %1,3f\n"
+	"2:\n"
+	".subsection 2\n"
+	"3:	br 1b\n"
+	".previous"
+	: "=&r"(prev), "=&r"(cmp), "=m"(*m)
+	: "r"((long) old), "r"(new), "m"(*m) : "memory");
+
+	return prev;
+}
+
+static inline unsigned long
+____cmpxchg_u64(volatile long *m, unsigned long old, unsigned long new)
+{
+	unsigned long prev, cmp;
+
+	__asm__ __volatile__(
+	"1:	ldq_l %0,%5\n"
+	"	cmpeq %0,%3,%1\n"
+	"	beq %1,2f\n"
+	"	mov %4,%1\n"
+	"	stq_c %1,%2\n"
+	"	beq %1,3f\n"
+	"2:\n"
+	".subsection 2\n"
+	"3:	br 1b\n"
+	".previous"
+	: "=&r"(prev), "=&r"(cmp), "=m"(*m)
+	: "r"((long) old), "r"(new), "m"(*m) : "memory");
+
+	return prev;
+}
+
+/* This function doesn't exist, so you'll get a linker error
+   if something tries to do an invalid cmpxchg().  */
+extern void __cmpxchg_called_with_bad_pointer(void);
+
+static __always_inline unsigned long
+____cmpxchg(volatile void *ptr, unsigned long old, unsigned long new,
+	      int size)
+{
+	return
+		size == 1 ? ____cmpxchg_u8(ptr, old, new) :
+		size == 2 ? ____cmpxchg_u16(ptr, old, new) :
+		size == 4 ? ____cmpxchg_u32(ptr, old, new) :
+		size == 8 ? ____cmpxchg_u64(ptr, old, new) :
+			(__cmpxchg_called_with_bad_pointer(), old);
+}
 
 #define xchg_local(ptr, x)						\
 ({									\
 	__typeof__(*(ptr)) _x_ = (x);					\
-	(__typeof__(*(ptr))) __xchg_local((ptr), (unsigned long)_x_,	\
-				       sizeof(*(ptr)));			\
+	(__typeof__(*(ptr))) ____xchg((ptr), (unsigned long)_x_,	\
+					       sizeof(*(ptr)));		\
 })
 
 #define arch_cmpxchg_local(ptr, o, n)					\
 ({									\
 	__typeof__(*(ptr)) _o_ = (o);					\
 	__typeof__(*(ptr)) _n_ = (n);					\
-	(__typeof__(*(ptr))) __cmpxchg_local((ptr), (unsigned long)_o_,	\
+	(__typeof__(*(ptr))) ____cmpxchg((ptr), (unsigned long)_o_,	\
 					  (unsigned long)_n_,		\
 					  sizeof(*(ptr)));		\
 })
@@ -32,12 +247,6 @@
 	cmpxchg_local((ptr), (o), (n));					\
 })
 
-#undef ____xchg
-#undef ____cmpxchg
-#define ____xchg(type, args...)		__xchg ##type(args)
-#define ____cmpxchg(type, args...)	__cmpxchg ##type(args)
-#include <asm/xchg.h>
-
 /*
  * The leading and the trailing memory barriers guarantee that these
  * operations are fully ordered.
@@ -48,7 +257,7 @@
 	__typeof__(*(ptr)) _x_ = (x);					\
 	smp_mb();							\
 	__ret = (__typeof__(*(ptr)))					\
-		__xchg((ptr), (unsigned long)_x_, sizeof(*(ptr)));	\
+		____xchg((ptr), (unsigned long)_x_, sizeof(*(ptr)));	\
 	smp_mb();							\
 	__ret;								\
 })
@@ -59,7 +268,7 @@
 	__typeof__(*(ptr)) _o_ = (o);					\
 	__typeof__(*(ptr)) _n_ = (n);					\
 	smp_mb();							\
-	__ret = (__typeof__(*(ptr))) __cmpxchg((ptr),			\
+	__ret = (__typeof__(*(ptr))) ____cmpxchg((ptr),			\
 		(unsigned long)_o_, (unsigned long)_n_, sizeof(*(ptr)));\
 	smp_mb();							\
 	__ret;								\
@@ -71,6 +280,4 @@
 	arch_cmpxchg((ptr), (o), (n));					\
 })
 
-#undef ____cmpxchg
-
 #endif /* _ALPHA_CMPXCHG_H */
diff --git a/arch/alpha/include/asm/core_apecs.h b/arch/alpha/include/asm/core_apecs.h
deleted file mode 100644
index 2d9726fc02ef..000000000000
--- a/arch/alpha/include/asm/core_apecs.h
+++ /dev/null
@@ -1,518 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ALPHA_APECS__H__
-#define __ALPHA_APECS__H__
-
-#include <linux/types.h>
-#include <asm/compiler.h>
-
-/*
- * APECS is the internal name for the 2107x chipset which provides
- * memory controller and PCI access for the 21064 chip based systems.
- *
- * This file is based on:
- *
- * DECchip 21071-AA and DECchip 21072-AA Core Logic Chipsets
- * Data Sheet
- *
- * EC-N0648-72
- *
- *
- * david.rusling@reo.mts.dec.com Initial Version.
- *
- */
-
-/*
-   An AVANTI *might* be an XL, and an XL has only 27 bits of ISA address
-   that get passed through the PCI<->ISA bridge chip. So we've gotta use
-   both windows to max out the physical memory we can DMA to. Sigh...
-
-   If we try a window at 0 for 1GB as a work-around, we run into conflicts
-   with ISA/PCI bus memory which can't be relocated, like VGA aperture and
-   BIOS ROMs. So we must put the windows high enough to avoid these areas.
-
-   We put window 1 at BUS 64Mb for 64Mb, mapping physical 0 to 64Mb-1,
-   and window 2 at BUS 1Gb for 1Gb, mapping physical 0 to 1Gb-1.
-   Yes, this does map 0 to 64Mb-1 twice, but only window 1 will actually
-   be used for that range (via virt_to_bus()).
-
-   Note that we actually fudge the window 1 maximum as 48Mb instead of 64Mb,
-   to keep virt_to_bus() from returning an address in the first window, for
-   a data area that goes beyond the 64Mb first DMA window.  Sigh...
-   The fudge factor MUST match with <asm/dma.h> MAX_DMA_ADDRESS, but
-   we can't just use that here, because of header file looping... :-(
-
-   Window 1 will be used for all DMA from the ISA bus; yes, that does
-   limit what memory an ISA floppy or sound card or Ethernet can touch, but
-   it's also a known limitation on other platforms as well. We use the
-   same technique that is used on INTEL platforms with similar limitation:
-   set MAX_DMA_ADDRESS and clear some pages' DMAable flags during mem_init().
-   We trust that any ISA bus device drivers will *always* ask for DMAable
-   memory explicitly via kmalloc()/get_free_pages() flags arguments.
-
-   Note that most PCI bus devices' drivers do *not* explicitly ask for
-   DMAable memory; they count on being able to DMA to any memory they
-   get from kmalloc()/get_free_pages(). They will also use window 1 for
-   any physical memory accesses below 64Mb; the rest will be handled by
-   window 2, maxing out at 1Gb of memory. I trust this is enough... :-)
-
-   We hope that the area before the first window is large enough so that
-   there will be no overlap at the top end (64Mb). We *must* locate the
-   PCI cards' memory just below window 1, so that there's still the
-   possibility of being able to access it via SPARSE space. This is
-   important for cards such as the Matrox Millennium, whose Xserver
-   wants to access memory-mapped registers in byte and short lengths.
-
-   Note that the XL is treated differently from the AVANTI, even though
-   for most other things they are identical. It didn't seem reasonable to
-   make the AVANTI support pay for the limitations of the XL. It is true,
-   however, that an XL kernel will run on an AVANTI without problems.
-
-   %%% All of this should be obviated by the ability to route
-   everything through the iommu.
-*/
-
-/*
- * 21071-DA Control and Status registers.
- * These are used for PCI memory access.
- */
-#define APECS_IOC_DCSR                  (IDENT_ADDR + 0x1A0000000UL)
-#define APECS_IOC_PEAR                  (IDENT_ADDR + 0x1A0000020UL)
-#define APECS_IOC_SEAR                  (IDENT_ADDR + 0x1A0000040UL)
-#define APECS_IOC_DR1                   (IDENT_ADDR + 0x1A0000060UL)
-#define APECS_IOC_DR2                   (IDENT_ADDR + 0x1A0000080UL)
-#define APECS_IOC_DR3                   (IDENT_ADDR + 0x1A00000A0UL)
-
-#define APECS_IOC_TB1R                  (IDENT_ADDR + 0x1A00000C0UL)
-#define APECS_IOC_TB2R                  (IDENT_ADDR + 0x1A00000E0UL)
-
-#define APECS_IOC_PB1R                  (IDENT_ADDR + 0x1A0000100UL)
-#define APECS_IOC_PB2R                  (IDENT_ADDR + 0x1A0000120UL)
-
-#define APECS_IOC_PM1R                  (IDENT_ADDR + 0x1A0000140UL)
-#define APECS_IOC_PM2R                  (IDENT_ADDR + 0x1A0000160UL)
-
-#define APECS_IOC_HAXR0                 (IDENT_ADDR + 0x1A0000180UL)
-#define APECS_IOC_HAXR1                 (IDENT_ADDR + 0x1A00001A0UL)
-#define APECS_IOC_HAXR2                 (IDENT_ADDR + 0x1A00001C0UL)
-
-#define APECS_IOC_PMLT                  (IDENT_ADDR + 0x1A00001E0UL)
-
-#define APECS_IOC_TLBTAG0               (IDENT_ADDR + 0x1A0000200UL)
-#define APECS_IOC_TLBTAG1               (IDENT_ADDR + 0x1A0000220UL)
-#define APECS_IOC_TLBTAG2               (IDENT_ADDR + 0x1A0000240UL)
-#define APECS_IOC_TLBTAG3               (IDENT_ADDR + 0x1A0000260UL)
-#define APECS_IOC_TLBTAG4               (IDENT_ADDR + 0x1A0000280UL)
-#define APECS_IOC_TLBTAG5               (IDENT_ADDR + 0x1A00002A0UL)
-#define APECS_IOC_TLBTAG6               (IDENT_ADDR + 0x1A00002C0UL)
-#define APECS_IOC_TLBTAG7               (IDENT_ADDR + 0x1A00002E0UL)
-
-#define APECS_IOC_TLBDATA0              (IDENT_ADDR + 0x1A0000300UL)
-#define APECS_IOC_TLBDATA1              (IDENT_ADDR + 0x1A0000320UL)
-#define APECS_IOC_TLBDATA2              (IDENT_ADDR + 0x1A0000340UL)
-#define APECS_IOC_TLBDATA3              (IDENT_ADDR + 0x1A0000360UL)
-#define APECS_IOC_TLBDATA4              (IDENT_ADDR + 0x1A0000380UL)
-#define APECS_IOC_TLBDATA5              (IDENT_ADDR + 0x1A00003A0UL)
-#define APECS_IOC_TLBDATA6              (IDENT_ADDR + 0x1A00003C0UL)
-#define APECS_IOC_TLBDATA7              (IDENT_ADDR + 0x1A00003E0UL)
-
-#define APECS_IOC_TBIA                  (IDENT_ADDR + 0x1A0000400UL)
-
-
-/*
- * 21071-CA Control and Status registers.
- * These are used to program memory timing,
- *  configure memory and initialise the B-Cache.
- */
-#define APECS_MEM_GCR		        (IDENT_ADDR + 0x180000000UL)
-#define APECS_MEM_EDSR		        (IDENT_ADDR + 0x180000040UL)
-#define APECS_MEM_TAR  		        (IDENT_ADDR + 0x180000060UL)
-#define APECS_MEM_ELAR		        (IDENT_ADDR + 0x180000080UL)
-#define APECS_MEM_EHAR  		(IDENT_ADDR + 0x1800000a0UL)
-#define APECS_MEM_SFT_RST		(IDENT_ADDR + 0x1800000c0UL)
-#define APECS_MEM_LDxLAR 		(IDENT_ADDR + 0x1800000e0UL)
-#define APECS_MEM_LDxHAR 		(IDENT_ADDR + 0x180000100UL)
-#define APECS_MEM_GTR    		(IDENT_ADDR + 0x180000200UL)
-#define APECS_MEM_RTR    		(IDENT_ADDR + 0x180000220UL)
-#define APECS_MEM_VFPR   		(IDENT_ADDR + 0x180000240UL)
-#define APECS_MEM_PDLDR  		(IDENT_ADDR + 0x180000260UL)
-#define APECS_MEM_PDhDR  		(IDENT_ADDR + 0x180000280UL)
-
-/* Bank x Base Address Register */
-#define APECS_MEM_B0BAR  		(IDENT_ADDR + 0x180000800UL)
-#define APECS_MEM_B1BAR  		(IDENT_ADDR + 0x180000820UL)
-#define APECS_MEM_B2BAR  		(IDENT_ADDR + 0x180000840UL)
-#define APECS_MEM_B3BAR  		(IDENT_ADDR + 0x180000860UL)
-#define APECS_MEM_B4BAR  		(IDENT_ADDR + 0x180000880UL)
-#define APECS_MEM_B5BAR  		(IDENT_ADDR + 0x1800008A0UL)
-#define APECS_MEM_B6BAR  		(IDENT_ADDR + 0x1800008C0UL)
-#define APECS_MEM_B7BAR  		(IDENT_ADDR + 0x1800008E0UL)
-#define APECS_MEM_B8BAR  		(IDENT_ADDR + 0x180000900UL)
-
-/* Bank x Configuration Register */
-#define APECS_MEM_B0BCR  		(IDENT_ADDR + 0x180000A00UL)
-#define APECS_MEM_B1BCR  		(IDENT_ADDR + 0x180000A20UL)
-#define APECS_MEM_B2BCR  		(IDENT_ADDR + 0x180000A40UL)
-#define APECS_MEM_B3BCR  		(IDENT_ADDR + 0x180000A60UL)
-#define APECS_MEM_B4BCR  		(IDENT_ADDR + 0x180000A80UL)
-#define APECS_MEM_B5BCR  		(IDENT_ADDR + 0x180000AA0UL)
-#define APECS_MEM_B6BCR  		(IDENT_ADDR + 0x180000AC0UL)
-#define APECS_MEM_B7BCR  		(IDENT_ADDR + 0x180000AE0UL)
-#define APECS_MEM_B8BCR  		(IDENT_ADDR + 0x180000B00UL)
-
-/* Bank x Timing Register A */
-#define APECS_MEM_B0TRA  		(IDENT_ADDR + 0x180000C00UL)
-#define APECS_MEM_B1TRA  		(IDENT_ADDR + 0x180000C20UL)
-#define APECS_MEM_B2TRA  		(IDENT_ADDR + 0x180000C40UL)
-#define APECS_MEM_B3TRA  		(IDENT_ADDR + 0x180000C60UL)
-#define APECS_MEM_B4TRA  		(IDENT_ADDR + 0x180000C80UL)
-#define APECS_MEM_B5TRA  		(IDENT_ADDR + 0x180000CA0UL)
-#define APECS_MEM_B6TRA  		(IDENT_ADDR + 0x180000CC0UL)
-#define APECS_MEM_B7TRA  		(IDENT_ADDR + 0x180000CE0UL)
-#define APECS_MEM_B8TRA  		(IDENT_ADDR + 0x180000D00UL)
-
-/* Bank x Timing Register B */
-#define APECS_MEM_B0TRB                 (IDENT_ADDR + 0x180000E00UL)
-#define APECS_MEM_B1TRB  		(IDENT_ADDR + 0x180000E20UL)
-#define APECS_MEM_B2TRB  		(IDENT_ADDR + 0x180000E40UL)
-#define APECS_MEM_B3TRB  		(IDENT_ADDR + 0x180000E60UL)
-#define APECS_MEM_B4TRB  		(IDENT_ADDR + 0x180000E80UL)
-#define APECS_MEM_B5TRB  		(IDENT_ADDR + 0x180000EA0UL)
-#define APECS_MEM_B6TRB  		(IDENT_ADDR + 0x180000EC0UL)
-#define APECS_MEM_B7TRB  		(IDENT_ADDR + 0x180000EE0UL)
-#define APECS_MEM_B8TRB  		(IDENT_ADDR + 0x180000F00UL)
-
-
-/*
- * Memory spaces:
- */
-#define APECS_IACK_SC		        (IDENT_ADDR + 0x1b0000000UL)
-#define APECS_CONF		        (IDENT_ADDR + 0x1e0000000UL)
-#define APECS_IO			(IDENT_ADDR + 0x1c0000000UL)
-#define APECS_SPARSE_MEM		(IDENT_ADDR + 0x200000000UL)
-#define APECS_DENSE_MEM		        (IDENT_ADDR + 0x300000000UL)
-
-
-/*
- * Bit definitions for I/O Controller status register 0:
- */
-#define APECS_IOC_STAT0_CMD		0xf
-#define APECS_IOC_STAT0_ERR		(1<<4)
-#define APECS_IOC_STAT0_LOST		(1<<5)
-#define APECS_IOC_STAT0_THIT		(1<<6)
-#define APECS_IOC_STAT0_TREF		(1<<7)
-#define APECS_IOC_STAT0_CODE_SHIFT	8
-#define APECS_IOC_STAT0_CODE_MASK	0x7
-#define APECS_IOC_STAT0_P_NBR_SHIFT	13
-#define APECS_IOC_STAT0_P_NBR_MASK	0x7ffff
-
-#define APECS_HAE_ADDRESS		APECS_IOC_HAXR1
-
-
-/*
- * Data structure for handling APECS machine checks:
- */
-
-struct el_apecs_mikasa_sysdata_mcheck
-{
-	unsigned long coma_gcr;
-	unsigned long coma_edsr;
-	unsigned long coma_ter;
-	unsigned long coma_elar;
-	unsigned long coma_ehar;
-	unsigned long coma_ldlr;
-	unsigned long coma_ldhr;
-	unsigned long coma_base0;
-	unsigned long coma_base1;
-	unsigned long coma_base2;
-	unsigned long coma_base3;
-	unsigned long coma_cnfg0;
-	unsigned long coma_cnfg1;
-	unsigned long coma_cnfg2;
-	unsigned long coma_cnfg3;
-	unsigned long epic_dcsr;
-	unsigned long epic_pear;
-	unsigned long epic_sear;
-	unsigned long epic_tbr1;
-	unsigned long epic_tbr2;
-	unsigned long epic_pbr1;
-	unsigned long epic_pbr2;
-	unsigned long epic_pmr1;
-	unsigned long epic_pmr2;
-	unsigned long epic_harx1;
-	unsigned long epic_harx2;
-	unsigned long epic_pmlt;
-	unsigned long epic_tag0;
-	unsigned long epic_tag1;
-	unsigned long epic_tag2;
-	unsigned long epic_tag3;
-	unsigned long epic_tag4;
-	unsigned long epic_tag5;
-	unsigned long epic_tag6;
-	unsigned long epic_tag7;
-	unsigned long epic_data0;
-	unsigned long epic_data1;
-	unsigned long epic_data2;
-	unsigned long epic_data3;
-	unsigned long epic_data4;
-	unsigned long epic_data5;
-	unsigned long epic_data6;
-	unsigned long epic_data7;
-
-	unsigned long pceb_vid;
-	unsigned long pceb_did;
-	unsigned long pceb_revision;
-	unsigned long pceb_command;
-	unsigned long pceb_status;
-	unsigned long pceb_latency;
-	unsigned long pceb_control;
-	unsigned long pceb_arbcon;
-	unsigned long pceb_arbpri;
-
-	unsigned long esc_id;
-	unsigned long esc_revision;
-	unsigned long esc_int0;
-	unsigned long esc_int1;
-	unsigned long esc_elcr0;
-	unsigned long esc_elcr1;
-	unsigned long esc_last_eisa;
-	unsigned long esc_nmi_stat;
-
-	unsigned long pci_ir;
-	unsigned long pci_imr;
-	unsigned long svr_mgr;
-};
-
-/* This for the normal APECS machines.  */
-struct el_apecs_sysdata_mcheck
-{
-	unsigned long coma_gcr;
-	unsigned long coma_edsr;
-	unsigned long coma_ter;
-	unsigned long coma_elar;
-	unsigned long coma_ehar;
-	unsigned long coma_ldlr;
-	unsigned long coma_ldhr;
-	unsigned long coma_base0;
-	unsigned long coma_base1;
-	unsigned long coma_base2;
-	unsigned long coma_cnfg0;
-	unsigned long coma_cnfg1;
-	unsigned long coma_cnfg2;
-	unsigned long epic_dcsr;
-	unsigned long epic_pear;
-	unsigned long epic_sear;
-	unsigned long epic_tbr1;
-	unsigned long epic_tbr2;
-	unsigned long epic_pbr1;
-	unsigned long epic_pbr2;
-	unsigned long epic_pmr1;
-	unsigned long epic_pmr2;
-	unsigned long epic_harx1;
-	unsigned long epic_harx2;
-	unsigned long epic_pmlt;
-	unsigned long epic_tag0;
-	unsigned long epic_tag1;
-	unsigned long epic_tag2;
-	unsigned long epic_tag3;
-	unsigned long epic_tag4;
-	unsigned long epic_tag5;
-	unsigned long epic_tag6;
-	unsigned long epic_tag7;
-	unsigned long epic_data0;
-	unsigned long epic_data1;
-	unsigned long epic_data2;
-	unsigned long epic_data3;
-	unsigned long epic_data4;
-	unsigned long epic_data5;
-	unsigned long epic_data6;
-	unsigned long epic_data7;
-};
-
-struct el_apecs_procdata
-{
-	unsigned long paltemp[32];  /* PAL TEMP REGS. */
-	/* EV4-specific fields */
-	unsigned long exc_addr;     /* Address of excepting instruction. */
-	unsigned long exc_sum;      /* Summary of arithmetic traps. */
-	unsigned long exc_mask;     /* Exception mask (from exc_sum). */
-	unsigned long iccsr;        /* IBox hardware enables. */
-	unsigned long pal_base;     /* Base address for PALcode. */
-	unsigned long hier;         /* Hardware Interrupt Enable. */
-	unsigned long hirr;         /* Hardware Interrupt Request. */
-	unsigned long csr;          /* D-stream fault info. */
-	unsigned long dc_stat;      /* D-cache status (ECC/Parity Err). */
-	unsigned long dc_addr;      /* EV3 Phys Addr for ECC/DPERR. */
-	unsigned long abox_ctl;     /* ABox Control Register. */
-	unsigned long biu_stat;     /* BIU Status. */
-	unsigned long biu_addr;     /* BUI Address. */
-	unsigned long biu_ctl;      /* BIU Control. */
-	unsigned long fill_syndrome;/* For correcting ECC errors. */
-	unsigned long fill_addr;    /* Cache block which was being read */
-	unsigned long va;           /* Effective VA of fault or miss. */
-	unsigned long bc_tag;       /* Backup Cache Tag Probe Results.*/
-};
-
-
-#ifdef __KERNEL__
-
-#ifndef __EXTERN_INLINE
-#define __EXTERN_INLINE extern inline
-#define __IO_EXTERN_INLINE
-#endif
-
-/*
- * I/O functions:
- *
- * Unlike Jensen, the APECS machines have no concept of local
- * I/O---everything goes over the PCI bus.
- *
- * There is plenty room for optimization here.  In particular,
- * the Alpha's insb/insw/extb/extw should be useful in moving
- * data to/from the right byte-lanes.
- */
-
-#define vip	volatile int __force *
-#define vuip	volatile unsigned int __force *
-#define vulp	volatile unsigned long __force *
-
-#define APECS_SET_HAE						\
-	do {							\
-		if (addr >= (1UL << 24)) {			\
-			unsigned long msb = addr & 0xf8000000;	\
-			addr -= msb;				\
-			set_hae(msb);				\
-		}						\
-	} while (0)
-
-__EXTERN_INLINE unsigned int apecs_ioread8(const void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long result, base_and_type;
-
-	if (addr >= APECS_DENSE_MEM) {
-		addr -= APECS_DENSE_MEM;
-		APECS_SET_HAE;
-		base_and_type = APECS_SPARSE_MEM + 0x00;
-	} else {
-		addr -= APECS_IO;
-		base_and_type = APECS_IO + 0x00;
-	}
-
-	result = *(vip) ((addr << 5) + base_and_type);
-	return __kernel_extbl(result, addr & 3);
-}
-
-__EXTERN_INLINE void apecs_iowrite8(u8 b, void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long w, base_and_type;
-
-	if (addr >= APECS_DENSE_MEM) {
-		addr -= APECS_DENSE_MEM;
-		APECS_SET_HAE;
-		base_and_type = APECS_SPARSE_MEM + 0x00;
-	} else {
-		addr -= APECS_IO;
-		base_and_type = APECS_IO + 0x00;
-	}
-
-	w = __kernel_insbl(b, addr & 3);
-	*(vuip) ((addr << 5) + base_and_type) = w;
-}
-
-__EXTERN_INLINE unsigned int apecs_ioread16(const void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long result, base_and_type;
-
-	if (addr >= APECS_DENSE_MEM) {
-		addr -= APECS_DENSE_MEM;
-		APECS_SET_HAE;
-		base_and_type = APECS_SPARSE_MEM + 0x08;
-	} else {
-		addr -= APECS_IO;
-		base_and_type = APECS_IO + 0x08;
-	}
-
-	result = *(vip) ((addr << 5) + base_and_type);
-	return __kernel_extwl(result, addr & 3);
-}
-
-__EXTERN_INLINE void apecs_iowrite16(u16 b, void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long w, base_and_type;
-
-	if (addr >= APECS_DENSE_MEM) {
-		addr -= APECS_DENSE_MEM;
-		APECS_SET_HAE;
-		base_and_type = APECS_SPARSE_MEM + 0x08;
-	} else {
-		addr -= APECS_IO;
-		base_and_type = APECS_IO + 0x08;
-	}
-
-	w = __kernel_inswl(b, addr & 3);
-	*(vuip) ((addr << 5) + base_and_type) = w;
-}
-
-__EXTERN_INLINE unsigned int apecs_ioread32(const void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	if (addr < APECS_DENSE_MEM)
-		addr = ((addr - APECS_IO) << 5) + APECS_IO + 0x18;
-	return *(vuip)addr;
-}
-
-__EXTERN_INLINE void apecs_iowrite32(u32 b, void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	if (addr < APECS_DENSE_MEM)
-		addr = ((addr - APECS_IO) << 5) + APECS_IO + 0x18;
-	*(vuip)addr = b;
-}
-
-__EXTERN_INLINE void __iomem *apecs_ioportmap(unsigned long addr)
-{
-	return (void __iomem *)(addr + APECS_IO);
-}
-
-__EXTERN_INLINE void __iomem *apecs_ioremap(unsigned long addr,
-					    unsigned long size)
-{
-	return (void __iomem *)(addr + APECS_DENSE_MEM);
-}
-
-__EXTERN_INLINE int apecs_is_ioaddr(unsigned long addr)
-{
-	return addr >= IDENT_ADDR + 0x180000000UL;
-}
-
-__EXTERN_INLINE int apecs_is_mmio(const volatile void __iomem *addr)
-{
-	return (unsigned long)addr >= APECS_DENSE_MEM;
-}
-
-#undef APECS_SET_HAE
-
-#undef vip
-#undef vuip
-#undef vulp
-
-#undef __IO_PREFIX
-#define __IO_PREFIX		apecs
-#define apecs_trivial_io_bw	0
-#define apecs_trivial_io_lq	0
-#define apecs_trivial_rw_bw	2
-#define apecs_trivial_rw_lq	1
-#define apecs_trivial_iounmap	1
-#include <asm/io_trivial.h>
-
-#ifdef __IO_EXTERN_INLINE
-#undef __EXTERN_INLINE
-#undef __IO_EXTERN_INLINE
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* __ALPHA_APECS__H__ */
diff --git a/arch/alpha/include/asm/core_cia.h b/arch/alpha/include/asm/core_cia.h
index cb22991f6761..d26bdfb7ca3b 100644
--- a/arch/alpha/include/asm/core_cia.h
+++ b/arch/alpha/include/asm/core_cia.h
@@ -342,7 +342,7 @@ struct el_CIA_sysdata_mcheck {
 #define vuip	volatile unsigned int __force *
 #define vulp	volatile unsigned long __force *
 
-__EXTERN_INLINE unsigned int cia_ioread8(const void __iomem *xaddr)
+__EXTERN_INLINE u8 cia_ioread8(const void __iomem *xaddr)
 {
 	unsigned long addr = (unsigned long) xaddr;
 	unsigned long result, base_and_type;
@@ -374,7 +374,7 @@ __EXTERN_INLINE void cia_iowrite8(u8 b, void __iomem *xaddr)
 	*(vuip) ((addr << 5) + base_and_type) = w;
 }
 
-__EXTERN_INLINE unsigned int cia_ioread16(const void __iomem *xaddr)
+__EXTERN_INLINE u16 cia_ioread16(const void __iomem *xaddr)
 {
 	unsigned long addr = (unsigned long) xaddr;
 	unsigned long result, base_and_type;
@@ -404,7 +404,7 @@ __EXTERN_INLINE void cia_iowrite16(u16 b, void __iomem *xaddr)
 	*(vuip) ((addr << 5) + base_and_type) = w;
 }
 
-__EXTERN_INLINE unsigned int cia_ioread32(const void __iomem *xaddr)
+__EXTERN_INLINE u32 cia_ioread32(const void __iomem *xaddr)
 {
 	unsigned long addr = (unsigned long) xaddr;
 	if (addr < CIA_DENSE_MEM)
@@ -420,6 +420,22 @@ __EXTERN_INLINE void cia_iowrite32(u32 b, void __iomem *xaddr)
 	*(vuip)addr = b;
 }
 
+__EXTERN_INLINE u64 cia_ioread64(const void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	if (addr < CIA_DENSE_MEM)
+		addr = ((addr - CIA_IO) << 5) + CIA_IO + 0x18;
+	return *(vulp)addr;
+}
+
+__EXTERN_INLINE void cia_iowrite64(u64 b, void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	if (addr < CIA_DENSE_MEM)
+		addr = ((addr - CIA_IO) << 5) + CIA_IO + 0x18;
+	*(vulp)addr = b;
+}
+
 __EXTERN_INLINE void __iomem *cia_ioportmap(unsigned long addr)
 {
 	return (void __iomem *)(addr + CIA_IO);
diff --git a/arch/alpha/include/asm/core_lca.h b/arch/alpha/include/asm/core_lca.h
deleted file mode 100644
index ec86314418cb..000000000000
--- a/arch/alpha/include/asm/core_lca.h
+++ /dev/null
@@ -1,362 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ALPHA_LCA__H__
-#define __ALPHA_LCA__H__
-
-#include <asm/compiler.h>
-#include <asm/mce.h>
-
-/*
- * Low Cost Alpha (LCA) definitions (these apply to 21066 and 21068,
- * for example).
- *
- * This file is based on:
- *
- *	DECchip 21066 and DECchip 21068 Alpha AXP Microprocessors
- *	Hardware Reference Manual; Digital Equipment Corp.; May 1994;
- *	Maynard, MA; Order Number: EC-N2681-71.
- */
-
-/*
- * NOTE: The LCA uses a Host Address Extension (HAE) register to access
- *	 PCI addresses that are beyond the first 27 bits of address
- *	 space.  Updating the HAE requires an external cycle (and
- *	 a memory barrier), which tends to be slow.  Instead of updating
- *	 it on each sparse memory access, we keep the current HAE value
- *	 cached in variable cache_hae.  Only if the cached HAE differs
- *	 from the desired HAE value do we actually updated HAE register.
- *	 The HAE register is preserved by the interrupt handler entry/exit
- *	 code, so this scheme works even in the presence of interrupts.
- *
- * Dense memory space doesn't require the HAE, but is restricted to
- * aligned 32 and 64 bit accesses.  Special Cycle and Interrupt
- * Acknowledge cycles may also require the use of the HAE.  The LCA
- * limits I/O address space to the bottom 24 bits of address space,
- * but this easily covers the 16 bit ISA I/O address space.
- */
-
-/*
- * NOTE 2! The memory operations do not set any memory barriers, as
- * it's not needed for cases like a frame buffer that is essentially
- * memory-like.  You need to do them by hand if the operations depend
- * on ordering.
- *
- * Similarly, the port I/O operations do a "mb" only after a write
- * operation: if an mb is needed before (as in the case of doing
- * memory mapped I/O first, and then a port I/O operation to the same
- * device), it needs to be done by hand.
- *
- * After the above has bitten me 100 times, I'll give up and just do
- * the mb all the time, but right now I'm hoping this will work out.
- * Avoiding mb's may potentially be a noticeable speed improvement,
- * but I can't honestly say I've tested it.
- *
- * Handling interrupts that need to do mb's to synchronize to
- * non-interrupts is another fun race area.  Don't do it (because if
- * you do, I'll have to do *everything* with interrupts disabled,
- * ugh).
- */
-
-/*
- * Memory Controller registers:
- */
-#define LCA_MEM_BCR0		(IDENT_ADDR + 0x120000000UL)
-#define LCA_MEM_BCR1		(IDENT_ADDR + 0x120000008UL)
-#define LCA_MEM_BCR2		(IDENT_ADDR + 0x120000010UL)
-#define LCA_MEM_BCR3		(IDENT_ADDR + 0x120000018UL)
-#define LCA_MEM_BMR0		(IDENT_ADDR + 0x120000020UL)
-#define LCA_MEM_BMR1		(IDENT_ADDR + 0x120000028UL)
-#define LCA_MEM_BMR2		(IDENT_ADDR + 0x120000030UL)
-#define LCA_MEM_BMR3		(IDENT_ADDR + 0x120000038UL)
-#define LCA_MEM_BTR0		(IDENT_ADDR + 0x120000040UL)
-#define LCA_MEM_BTR1		(IDENT_ADDR + 0x120000048UL)
-#define LCA_MEM_BTR2		(IDENT_ADDR + 0x120000050UL)
-#define LCA_MEM_BTR3		(IDENT_ADDR + 0x120000058UL)
-#define LCA_MEM_GTR		(IDENT_ADDR + 0x120000060UL)
-#define LCA_MEM_ESR		(IDENT_ADDR + 0x120000068UL)
-#define LCA_MEM_EAR		(IDENT_ADDR + 0x120000070UL)
-#define LCA_MEM_CAR		(IDENT_ADDR + 0x120000078UL)
-#define LCA_MEM_VGR		(IDENT_ADDR + 0x120000080UL)
-#define LCA_MEM_PLM		(IDENT_ADDR + 0x120000088UL)
-#define LCA_MEM_FOR		(IDENT_ADDR + 0x120000090UL)
-
-/*
- * I/O Controller registers:
- */
-#define LCA_IOC_HAE		(IDENT_ADDR + 0x180000000UL)
-#define LCA_IOC_CONF		(IDENT_ADDR + 0x180000020UL)
-#define LCA_IOC_STAT0		(IDENT_ADDR + 0x180000040UL)
-#define LCA_IOC_STAT1		(IDENT_ADDR + 0x180000060UL)
-#define LCA_IOC_TBIA		(IDENT_ADDR + 0x180000080UL)
-#define LCA_IOC_TB_ENA		(IDENT_ADDR + 0x1800000a0UL)
-#define LCA_IOC_SFT_RST		(IDENT_ADDR + 0x1800000c0UL)
-#define LCA_IOC_PAR_DIS		(IDENT_ADDR + 0x1800000e0UL)
-#define LCA_IOC_W_BASE0		(IDENT_ADDR + 0x180000100UL)
-#define LCA_IOC_W_BASE1		(IDENT_ADDR + 0x180000120UL)
-#define LCA_IOC_W_MASK0		(IDENT_ADDR + 0x180000140UL)
-#define LCA_IOC_W_MASK1		(IDENT_ADDR + 0x180000160UL)
-#define LCA_IOC_T_BASE0		(IDENT_ADDR + 0x180000180UL)
-#define LCA_IOC_T_BASE1		(IDENT_ADDR + 0x1800001a0UL)
-#define LCA_IOC_TB_TAG0		(IDENT_ADDR + 0x188000000UL)
-#define LCA_IOC_TB_TAG1		(IDENT_ADDR + 0x188000020UL)
-#define LCA_IOC_TB_TAG2		(IDENT_ADDR + 0x188000040UL)
-#define LCA_IOC_TB_TAG3		(IDENT_ADDR + 0x188000060UL)
-#define LCA_IOC_TB_TAG4		(IDENT_ADDR + 0x188000070UL)
-#define LCA_IOC_TB_TAG5		(IDENT_ADDR + 0x1880000a0UL)
-#define LCA_IOC_TB_TAG6		(IDENT_ADDR + 0x1880000c0UL)
-#define LCA_IOC_TB_TAG7		(IDENT_ADDR + 0x1880000e0UL)
-
-/*
- * Memory spaces:
- */
-#define LCA_IACK_SC		(IDENT_ADDR + 0x1a0000000UL)
-#define LCA_CONF		(IDENT_ADDR + 0x1e0000000UL)
-#define LCA_IO			(IDENT_ADDR + 0x1c0000000UL)
-#define LCA_SPARSE_MEM		(IDENT_ADDR + 0x200000000UL)
-#define LCA_DENSE_MEM		(IDENT_ADDR + 0x300000000UL)
-
-/*
- * Bit definitions for I/O Controller status register 0:
- */
-#define LCA_IOC_STAT0_CMD		0xf
-#define LCA_IOC_STAT0_ERR		(1<<4)
-#define LCA_IOC_STAT0_LOST		(1<<5)
-#define LCA_IOC_STAT0_THIT		(1<<6)
-#define LCA_IOC_STAT0_TREF		(1<<7)
-#define LCA_IOC_STAT0_CODE_SHIFT	8
-#define LCA_IOC_STAT0_CODE_MASK		0x7
-#define LCA_IOC_STAT0_P_NBR_SHIFT	13
-#define LCA_IOC_STAT0_P_NBR_MASK	0x7ffff
-
-#define LCA_HAE_ADDRESS		LCA_IOC_HAE
-
-/* LCA PMR Power Management register defines */
-#define LCA_PMR_ADDR	(IDENT_ADDR + 0x120000098UL)
-#define LCA_PMR_PDIV    0x7                     /* Primary clock divisor */
-#define LCA_PMR_ODIV    0x38                    /* Override clock divisor */
-#define LCA_PMR_INTO    0x40                    /* Interrupt override */
-#define LCA_PMR_DMAO    0x80                    /* DMA override */
-#define LCA_PMR_OCCEB   0xffff0000L             /* Override cycle counter - even bits */
-#define LCA_PMR_OCCOB   0xffff000000000000L     /* Override cycle counter - even bits */
-#define LCA_PMR_PRIMARY_MASK    0xfffffffffffffff8L
-
-/* LCA PMR Macros */
-
-#define LCA_READ_PMR        (*(volatile unsigned long *)LCA_PMR_ADDR)
-#define LCA_WRITE_PMR(d)    (*((volatile unsigned long *)LCA_PMR_ADDR) = (d))
-
-#define LCA_GET_PRIMARY(r)  ((r) & LCA_PMR_PDIV)
-#define LCA_GET_OVERRIDE(r) (((r) >> 3) & LCA_PMR_PDIV)
-#define LCA_SET_PRIMARY_CLOCK(r, c) ((r) = (((r) & LCA_PMR_PRIMARY_MASK)|(c)))
-
-/* LCA PMR Divisor values */
-#define LCA_PMR_DIV_1   0x0
-#define LCA_PMR_DIV_1_5 0x1
-#define LCA_PMR_DIV_2   0x2
-#define LCA_PMR_DIV_4   0x3
-#define LCA_PMR_DIV_8   0x4
-#define LCA_PMR_DIV_16  0x5
-#define LCA_PMR_DIV_MIN DIV_1
-#define LCA_PMR_DIV_MAX DIV_16
-
-
-/*
- * Data structure for handling LCA machine checks.  Correctable errors
- * result in a short logout frame, uncorrectable ones in a long one.
- */
-struct el_lca_mcheck_short {
-	struct el_common	h;		/* common logout header */
-	unsigned long		esr;		/* error-status register */
-	unsigned long		ear;		/* error-address register */
-	unsigned long		dc_stat;	/* dcache status register */
-	unsigned long		ioc_stat0;	/* I/O controller status register 0 */
-	unsigned long		ioc_stat1;	/* I/O controller status register 1 */
-};
-
-struct el_lca_mcheck_long {
-	struct el_common	h;		/* common logout header */
-	unsigned long		pt[31];		/* PAL temps */
-	unsigned long		exc_addr;	/* exception address */
-	unsigned long		pad1[3];
-	unsigned long		pal_base;	/* PALcode base address */
-	unsigned long		hier;		/* hw interrupt enable */
-	unsigned long		hirr;		/* hw interrupt request */
-	unsigned long		mm_csr;		/* MMU control & status */
-	unsigned long		dc_stat;	/* data cache status */
-	unsigned long		dc_addr;	/* data cache addr register */
-	unsigned long		abox_ctl;	/* address box control register */
-	unsigned long		esr;		/* error status register */
-	unsigned long		ear;		/* error address register */
-	unsigned long		car;		/* cache control register */
-	unsigned long		ioc_stat0;	/* I/O controller status register 0 */
-	unsigned long		ioc_stat1;	/* I/O controller status register 1 */
-	unsigned long		va;		/* virtual address register */
-};
-
-union el_lca {
-	struct el_common *		c;
-	struct el_lca_mcheck_long *	l;
-	struct el_lca_mcheck_short *	s;
-};
-
-#ifdef __KERNEL__
-
-#ifndef __EXTERN_INLINE
-#define __EXTERN_INLINE extern inline
-#define __IO_EXTERN_INLINE
-#endif
-
-/*
- * I/O functions:
- *
- * Unlike Jensen, the Noname machines have no concept of local
- * I/O---everything goes over the PCI bus.
- *
- * There is plenty room for optimization here.  In particular,
- * the Alpha's insb/insw/extb/extw should be useful in moving
- * data to/from the right byte-lanes.
- */
-
-#define vip	volatile int __force *
-#define vuip	volatile unsigned int __force *
-#define vulp	volatile unsigned long __force *
-
-#define LCA_SET_HAE						\
-	do {							\
-		if (addr >= (1UL << 24)) {			\
-			unsigned long msb = addr & 0xf8000000;	\
-			addr -= msb;				\
-			set_hae(msb);				\
-		}						\
-	} while (0)
-
-
-__EXTERN_INLINE unsigned int lca_ioread8(const void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long result, base_and_type;
-
-	if (addr >= LCA_DENSE_MEM) {
-		addr -= LCA_DENSE_MEM;
-		LCA_SET_HAE;
-		base_and_type = LCA_SPARSE_MEM + 0x00;
-	} else {
-		addr -= LCA_IO;
-		base_and_type = LCA_IO + 0x00;
-	}
-
-	result = *(vip) ((addr << 5) + base_and_type);
-	return __kernel_extbl(result, addr & 3);
-}
-
-__EXTERN_INLINE void lca_iowrite8(u8 b, void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long w, base_and_type;
-
-	if (addr >= LCA_DENSE_MEM) {
-		addr -= LCA_DENSE_MEM;
-		LCA_SET_HAE;
-		base_and_type = LCA_SPARSE_MEM + 0x00;
-	} else {
-		addr -= LCA_IO;
-		base_and_type = LCA_IO + 0x00;
-	}
-
-	w = __kernel_insbl(b, addr & 3);
-	*(vuip) ((addr << 5) + base_and_type) = w;
-}
-
-__EXTERN_INLINE unsigned int lca_ioread16(const void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long result, base_and_type;
-
-	if (addr >= LCA_DENSE_MEM) {
-		addr -= LCA_DENSE_MEM;
-		LCA_SET_HAE;
-		base_and_type = LCA_SPARSE_MEM + 0x08;
-	} else {
-		addr -= LCA_IO;
-		base_and_type = LCA_IO + 0x08;
-	}
-
-	result = *(vip) ((addr << 5) + base_and_type);
-	return __kernel_extwl(result, addr & 3);
-}
-
-__EXTERN_INLINE void lca_iowrite16(u16 b, void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long w, base_and_type;
-
-	if (addr >= LCA_DENSE_MEM) {
-		addr -= LCA_DENSE_MEM;
-		LCA_SET_HAE;
-		base_and_type = LCA_SPARSE_MEM + 0x08;
-	} else {
-		addr -= LCA_IO;
-		base_and_type = LCA_IO + 0x08;
-	}
-
-	w = __kernel_inswl(b, addr & 3);
-	*(vuip) ((addr << 5) + base_and_type) = w;
-}
-
-__EXTERN_INLINE unsigned int lca_ioread32(const void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	if (addr < LCA_DENSE_MEM)
-		addr = ((addr - LCA_IO) << 5) + LCA_IO + 0x18;
-	return *(vuip)addr;
-}
-
-__EXTERN_INLINE void lca_iowrite32(u32 b, void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	if (addr < LCA_DENSE_MEM)
-		addr = ((addr - LCA_IO) << 5) + LCA_IO + 0x18;
-	*(vuip)addr = b;
-}
-
-__EXTERN_INLINE void __iomem *lca_ioportmap(unsigned long addr)
-{
-	return (void __iomem *)(addr + LCA_IO);
-}
-
-__EXTERN_INLINE void __iomem *lca_ioremap(unsigned long addr,
-					  unsigned long size)
-{
-	return (void __iomem *)(addr + LCA_DENSE_MEM);
-}
-
-__EXTERN_INLINE int lca_is_ioaddr(unsigned long addr)
-{
-	return addr >= IDENT_ADDR + 0x120000000UL;
-}
-
-__EXTERN_INLINE int lca_is_mmio(const volatile void __iomem *addr)
-{
-	return (unsigned long)addr >= LCA_DENSE_MEM;
-}
-
-#undef vip
-#undef vuip
-#undef vulp
-
-#undef __IO_PREFIX
-#define __IO_PREFIX		lca
-#define lca_trivial_rw_bw	2
-#define lca_trivial_rw_lq	1
-#define lca_trivial_io_bw	0
-#define lca_trivial_io_lq	0
-#define lca_trivial_iounmap	1
-#include <asm/io_trivial.h>
-
-#ifdef __IO_EXTERN_INLINE
-#undef __EXTERN_INLINE
-#undef __IO_EXTERN_INLINE
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* __ALPHA_LCA__H__ */
diff --git a/arch/alpha/include/asm/core_marvel.h b/arch/alpha/include/asm/core_marvel.h
index b266e02e284b..d99f3a82e0e5 100644
--- a/arch/alpha/include/asm/core_marvel.h
+++ b/arch/alpha/include/asm/core_marvel.h
@@ -332,10 +332,10 @@ struct io7 {
 #define vucp	volatile unsigned char __force *
 #define vusp	volatile unsigned short __force *
 
-extern unsigned int marvel_ioread8(const void __iomem *);
+extern u8 marvel_ioread8(const void __iomem *);
 extern void marvel_iowrite8(u8 b, void __iomem *);
 
-__EXTERN_INLINE unsigned int marvel_ioread16(const void __iomem *addr)
+__EXTERN_INLINE u16 marvel_ioread16(const void __iomem *addr)
 {
 	return __kernel_ldwu(*(vusp)addr);
 }
diff --git a/arch/alpha/include/asm/core_mcpcia.h b/arch/alpha/include/asm/core_mcpcia.h
index cb24d1bd6141..ed2bf8ad40ed 100644
--- a/arch/alpha/include/asm/core_mcpcia.h
+++ b/arch/alpha/include/asm/core_mcpcia.h
@@ -248,6 +248,7 @@ struct el_MCPCIA_uncorrected_frame_mcheck {
 
 #define vip	volatile int __force *
 #define vuip	volatile unsigned int __force *
+#define vulp	volatile unsigned long __force *
 
 #ifndef MCPCIA_ONE_HAE_WINDOW
 #define MCPCIA_FROB_MMIO						\
@@ -267,7 +268,7 @@ extern inline int __mcpcia_is_mmio(unsigned long addr)
 	return (addr & 0x80000000UL) == 0;
 }
 
-__EXTERN_INLINE unsigned int mcpcia_ioread8(const void __iomem *xaddr)
+__EXTERN_INLINE u8 mcpcia_ioread8(const void __iomem *xaddr)
 {
 	unsigned long addr = (unsigned long)xaddr & MCPCIA_MEM_MASK;
 	unsigned long hose = (unsigned long)xaddr & ~MCPCIA_MEM_MASK;
@@ -291,7 +292,7 @@ __EXTERN_INLINE void mcpcia_iowrite8(u8 b, void __iomem *xaddr)
 	*(vuip) ((addr << 5) + hose + 0x00) = w;
 }
 
-__EXTERN_INLINE unsigned int mcpcia_ioread16(const void __iomem *xaddr)
+__EXTERN_INLINE u16 mcpcia_ioread16(const void __iomem *xaddr)
 {
 	unsigned long addr = (unsigned long)xaddr & MCPCIA_MEM_MASK;
 	unsigned long hose = (unsigned long)xaddr & ~MCPCIA_MEM_MASK;
@@ -315,7 +316,7 @@ __EXTERN_INLINE void mcpcia_iowrite16(u16 b, void __iomem *xaddr)
 	*(vuip) ((addr << 5) + hose + 0x08) = w;
 }
 
-__EXTERN_INLINE unsigned int mcpcia_ioread32(const void __iomem *xaddr)
+__EXTERN_INLINE u32 mcpcia_ioread32(const void __iomem *xaddr)
 {
 	unsigned long addr = (unsigned long)xaddr;
 
@@ -335,6 +336,26 @@ __EXTERN_INLINE void mcpcia_iowrite32(u32 b, void __iomem *xaddr)
 	*(vuip)addr = b;
 }
 
+__EXTERN_INLINE u64 mcpcia_ioread64(const void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long)xaddr;
+
+	if (!__mcpcia_is_mmio(addr))
+		addr = ((addr & 0xffff) << 5) + (addr & ~0xfffful) + 0x18;
+
+	return *(vulp)addr;
+}
+
+__EXTERN_INLINE void mcpcia_iowrite64(u64 b, void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long)xaddr;
+
+	if (!__mcpcia_is_mmio(addr))
+		addr = ((addr & 0xffff) << 5) + (addr & ~0xfffful) + 0x18;
+
+	*(vulp)addr = b;
+}
+
 
 __EXTERN_INLINE void __iomem *mcpcia_ioportmap(unsigned long addr)
 {
@@ -362,6 +383,7 @@ __EXTERN_INLINE int mcpcia_is_mmio(const volatile void __iomem *xaddr)
 
 #undef vip
 #undef vuip
+#undef vulp
 
 #undef __IO_PREFIX
 #define __IO_PREFIX		mcpcia
diff --git a/arch/alpha/include/asm/core_t2.h b/arch/alpha/include/asm/core_t2.h
index 12bb7addc789..ca9b091d9c5f 100644
--- a/arch/alpha/include/asm/core_t2.h
+++ b/arch/alpha/include/asm/core_t2.h
@@ -25,16 +25,8 @@
 #define T2_MEM_R1_MASK 0x07ffffff  /* Mem sparse region 1 mask is 27 bits */
 
 /* GAMMA-SABLE is a SABLE with EV5-based CPUs */
-/* All LYNX machines, EV4 or EV5, use the GAMMA bias also */
 #define _GAMMA_BIAS		0x8000000000UL
-
-#if defined(CONFIG_ALPHA_GENERIC)
-#define GAMMA_BIAS		alpha_mv.sys.t2.gamma_bias
-#elif defined(CONFIG_ALPHA_GAMMA)
 #define GAMMA_BIAS		_GAMMA_BIAS
-#else
-#define GAMMA_BIAS		0
-#endif
 
 /*
  * Memory spaces:
@@ -360,6 +352,7 @@ struct el_t2_frame_corrected {
 
 #define vip	volatile int *
 #define vuip	volatile unsigned int *
+#define vulp	volatile unsigned long *
 
 extern inline u8 t2_inb(unsigned long addr)
 {
@@ -402,6 +395,17 @@ extern inline void t2_outl(u32 b, unsigned long addr)
 	mb();
 }
 
+extern inline u64 t2_inq(unsigned long addr)
+{
+	return *(vulp) ((addr << 5) + T2_IO + 0x18);
+}
+
+extern inline void t2_outq(u64 b, unsigned long addr)
+{
+	*(vulp) ((addr << 5) + T2_IO + 0x18) = b;
+	mb();
+}
+
 
 /*
  * Memory functions.
@@ -572,7 +576,7 @@ __EXTERN_INLINE int t2_is_mmio(const volatile void __iomem *addr)
    it doesn't make sense to merge the pio and mmio routines.  */
 
 #define IOPORT(OS, NS)							\
-__EXTERN_INLINE unsigned int t2_ioread##NS(const void __iomem *xaddr)		\
+__EXTERN_INLINE u##NS t2_ioread##NS(const void __iomem *xaddr)		\
 {									\
 	if (t2_is_mmio(xaddr))						\
 		return t2_read##OS(xaddr);				\
@@ -590,11 +594,13 @@ __EXTERN_INLINE void t2_iowrite##NS(u##NS b, void __iomem *xaddr)	\
 IOPORT(b, 8)
 IOPORT(w, 16)
 IOPORT(l, 32)
+IOPORT(q, 64)
 
 #undef IOPORT
 
 #undef vip
 #undef vuip
+#undef vulp
 
 #undef __IO_PREFIX
 #define __IO_PREFIX		t2
diff --git a/arch/alpha/include/asm/div64.h b/arch/alpha/include/asm/div64.h
deleted file mode 100644
index 6cd978cefb28..000000000000
--- a/arch/alpha/include/asm/div64.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/div64.h>
diff --git a/arch/alpha/include/asm/dma-mapping.h b/arch/alpha/include/asm/dma-mapping.h
index 0ee6a5c99b16..ad5a59b035cb 100644
--- a/arch/alpha/include/asm/dma-mapping.h
+++ b/arch/alpha/include/asm/dma-mapping.h
@@ -4,13 +4,9 @@
 
 extern const struct dma_map_ops alpha_pci_ops;
 
-static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus)
+static inline const struct dma_map_ops *get_arch_dma_ops(void)
 {
-#ifdef CONFIG_ALPHA_JENSEN
-	return NULL;
-#else
 	return &alpha_pci_ops;
-#endif
 }
 
 #endif	/* _ALPHA_DMA_MAPPING_H */
diff --git a/arch/alpha/include/asm/dma.h b/arch/alpha/include/asm/dma.h
index 28610ea7786d..3a88812b7165 100644
--- a/arch/alpha/include/asm/dma.h
+++ b/arch/alpha/include/asm/dma.h
@@ -82,11 +82,6 @@
   just a wiring limit.
 */
 
-/* The maximum address for ISA DMA transfer on Alpha XL, due to an
-   hardware SIO limitation, is 64MB.
-*/
-#define ALPHA_XL_MAX_ISA_DMA_ADDRESS		0x04000000UL
-
 /* The maximum address for ISA DMA transfer on RUFFIAN,
    due to an hardware SIO limitation, is 16MB.
 */
@@ -107,9 +102,7 @@
 #ifdef CONFIG_ALPHA_GENERIC
 # define MAX_ISA_DMA_ADDRESS		(alpha_mv.max_isa_dma_address)
 #else
-# if defined(CONFIG_ALPHA_XL)
-#  define MAX_ISA_DMA_ADDRESS		ALPHA_XL_MAX_ISA_DMA_ADDRESS
-# elif defined(CONFIG_ALPHA_RUFFIAN)
+# if defined(CONFIG_ALPHA_RUFFIAN)
 #  define MAX_ISA_DMA_ADDRESS		ALPHA_RUFFIAN_MAX_ISA_DMA_ADDRESS
 # elif defined(CONFIG_ALPHA_SABLE)
 #  define MAX_ISA_DMA_ADDRESS		ALPHA_SABLE_MAX_ISA_DMA_ADDRESS
@@ -365,13 +358,4 @@ extern void free_dma(unsigned int dmanr);	/* release it again */
 #define KERNEL_HAVE_CHECK_DMA
 extern int check_dma(unsigned int dmanr);
 
-/* From PCI */
-
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy 	(0)
-#endif
-
-
 #endif /* _ASM_DMA_H */
diff --git a/arch/alpha/include/asm/elf.h b/arch/alpha/include/asm/elf.h
index 8049997fa372..50c82187e60e 100644
--- a/arch/alpha/include/asm/elf.h
+++ b/arch/alpha/include/asm/elf.h
@@ -74,7 +74,7 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
 /*
  * This is used to ensure we don't load something for the wrong architecture.
  */
-#define elf_check_arch(x) ((x)->e_machine == EM_ALPHA)
+#define elf_check_arch(x) (((x)->e_machine == EM_ALPHA) && !((x)->e_flags & EF_ALPHA_32BIT))
 
 /*
  * These are used to set parameters in the core dumps.
@@ -120,12 +120,6 @@ extern int dump_elf_task(elf_greg_t *dest, struct task_struct *task);
 #define ELF_CORE_COPY_TASK_REGS(TASK, DEST) \
 	dump_elf_task(*(DEST), TASK)
 
-/* Similar, but for the FP registers.  */
-
-extern int dump_elf_task_fp(elf_fpreg_t *dest, struct task_struct *task);
-#define ELF_CORE_COPY_FPREGS(TASK, DEST) \
-	dump_elf_task_fp(*(DEST), TASK)
-
 /* This yields a mask that user programs can use to figure out what
    instruction set this CPU supports.  This is trivial on Alpha, 
    but not so on other machines. */
@@ -139,16 +133,10 @@ extern int dump_elf_task_fp(elf_fpreg_t *dest, struct task_struct *task);
 #define ELF_PLATFORM				\
 ({						\
 	enum implver_enum i_ = implver();	\
-	( i_ == IMPLVER_EV4 ? "ev4"		\
-	: i_ == IMPLVER_EV5			\
-	  ? (amask(AMASK_BWX) ? "ev5" : "ev56")	\
+	( i_ == IMPLVER_EV5 ? "ev56"			\
 	: amask (AMASK_CIX) ? "ev6" : "ev67");	\
 })
 
-#define SET_PERSONALITY(EX)					\
-	set_personality(((EX).e_flags & EF_ALPHA_32BIT)		\
-	   ? PER_LINUX_32BIT : PER_LINUX)
-
 extern int alpha_l1i_cacheshape;
 extern int alpha_l1d_cacheshape;
 extern int alpha_l2_cacheshape;
diff --git a/arch/alpha/include/asm/floppy.h b/arch/alpha/include/asm/floppy.h
index 8dfdb3aa1d96..5a6239e65097 100644
--- a/arch/alpha/include/asm/floppy.h
+++ b/arch/alpha/include/asm/floppy.h
@@ -20,7 +20,7 @@
 #define fd_free_dma()           free_dma(FLOPPY_DMA)
 #define fd_clear_dma_ff()       clear_dma_ff(FLOPPY_DMA)
 #define fd_set_dma_mode(mode)   set_dma_mode(FLOPPY_DMA,mode)
-#define fd_set_dma_addr(addr)   set_dma_addr(FLOPPY_DMA,virt_to_bus(addr))
+#define fd_set_dma_addr(addr)   set_dma_addr(FLOPPY_DMA,isa_virt_to_bus(addr))
 #define fd_set_dma_count(count) set_dma_count(FLOPPY_DMA,count)
 #define fd_enable_irq()         enable_irq(FLOPPY_IRQ)
 #define fd_disable_irq()        disable_irq(FLOPPY_IRQ)
@@ -43,17 +43,18 @@ alpha_fd_dma_setup(char *addr, unsigned long size, int mode, int io)
 	static int prev_dir;
 	int dir;
 
-	dir = (mode != DMA_MODE_READ) ? PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE;
+	dir = (mode != DMA_MODE_READ) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
 
 	if (bus_addr 
 	    && (addr != prev_addr || size != prev_size || dir != prev_dir)) {
 		/* different from last time -- unmap prev */
-		pci_unmap_single(isa_bridge, bus_addr, prev_size, prev_dir);
+		dma_unmap_single(&isa_bridge->dev, bus_addr, prev_size,
+				 prev_dir);
 		bus_addr = 0;
 	}
 
 	if (!bus_addr)	/* need to map it */
-		bus_addr = pci_map_single(isa_bridge, addr, size, dir);
+		bus_addr = dma_map_single(&isa_bridge->dev, addr, size, dir);
 
 	/* remember this one as prev */
 	prev_addr = addr;
@@ -89,25 +90,6 @@ static int FDC2 = -1;
 #define N_FDC 2
 #define N_DRIVE 8
 
-/*
- * Most Alphas have no problems with floppy DMA crossing 64k borders,
- * except for certain ones, like XL and RUFFIAN.
- *
- * However, the test is simple and fast, and this *is* floppy, after all,
- * so we do it for all platforms, just to make sure.
- *
- * This is advantageous in other circumstances as well, as in moving
- * about the PCI DMA windows and forcing the floppy to start doing
- * scatter-gather when it never had before, and there *is* a problem
- * on that platform... ;-}
- */
-
-static inline unsigned long CROSS_64KB(void *a, unsigned long s)
-{
-	unsigned long p = (unsigned long)a;
-	return ((p + s - 1) ^ p) & ~0xffffUL;
-}
-
 #define EXTRA_FLOPPY_PARAMS
 
 #endif /* __ASM_ALPHA_FLOPPY_H */
diff --git a/arch/alpha/include/asm/fpu.h b/arch/alpha/include/asm/fpu.h
index b9691405e56b..30b24135dd7a 100644
--- a/arch/alpha/include/asm/fpu.h
+++ b/arch/alpha/include/asm/fpu.h
@@ -15,21 +15,27 @@ rdfpcr(void)
 {
 	unsigned long tmp, ret;
 
+	preempt_disable();
+	if (current_thread_info()->status & TS_SAVED_FP) {
+		ret = current_thread_info()->fp[31];
+	} else {
 #if defined(CONFIG_ALPHA_EV6) || defined(CONFIG_ALPHA_EV67)
-	__asm__ __volatile__ (
-		"ftoit $f0,%0\n\t"
-		"mf_fpcr $f0\n\t"
-		"ftoit $f0,%1\n\t"
-		"itoft %0,$f0"
-		: "=r"(tmp), "=r"(ret));
+		__asm__ __volatile__ (
+			"ftoit $f0,%0\n\t"
+			"mf_fpcr $f0\n\t"
+			"ftoit $f0,%1\n\t"
+			"itoft %0,$f0"
+			: "=r"(tmp), "=r"(ret));
 #else
-	__asm__ __volatile__ (
-		"stt $f0,%0\n\t"
-		"mf_fpcr $f0\n\t"
-		"stt $f0,%1\n\t"
-		"ldt $f0,%0"
-		: "=m"(tmp), "=m"(ret));
+		__asm__ __volatile__ (
+			"stt $f0,%0\n\t"
+			"mf_fpcr $f0\n\t"
+			"stt $f0,%1\n\t"
+			"ldt $f0,%0"
+			: "=m"(tmp), "=m"(ret));
 #endif
+	}
+	preempt_enable();
 
 	return ret;
 }
@@ -39,21 +45,28 @@ wrfpcr(unsigned long val)
 {
 	unsigned long tmp;
 
+	preempt_disable();
+	if (current_thread_info()->status & TS_SAVED_FP) {
+		current_thread_info()->status |= TS_RESTORE_FP;
+		current_thread_info()->fp[31] = val;
+	} else {
 #if defined(CONFIG_ALPHA_EV6) || defined(CONFIG_ALPHA_EV67)
-	__asm__ __volatile__ (
-		"ftoit $f0,%0\n\t"
-		"itoft %1,$f0\n\t"
-		"mt_fpcr $f0\n\t"
-		"itoft %0,$f0"
-		: "=&r"(tmp) : "r"(val));
+		__asm__ __volatile__ (
+			"ftoit $f0,%0\n\t"
+			"itoft %1,$f0\n\t"
+			"mt_fpcr $f0\n\t"
+			"itoft %0,$f0"
+			: "=&r"(tmp) : "r"(val));
 #else
-	__asm__ __volatile__ (
-		"stt $f0,%0\n\t"
-		"ldt $f0,%1\n\t"
-		"mt_fpcr $f0\n\t"
-		"ldt $f0,%0"
-		: "=m"(tmp) : "m"(val));
+		__asm__ __volatile__ (
+			"stt $f0,%0\n\t"
+			"ldt $f0,%1\n\t"
+			"mt_fpcr $f0\n\t"
+			"ldt $f0,%0"
+			: "=m"(tmp) : "m"(val));
 #endif
+	}
+	preempt_enable();
 }
 
 static inline unsigned long
diff --git a/arch/alpha/include/asm/hwrpb.h b/arch/alpha/include/asm/hwrpb.h
index d8180e527a1e..db831cf8de10 100644
--- a/arch/alpha/include/asm/hwrpb.h
+++ b/arch/alpha/include/asm/hwrpb.h
@@ -135,7 +135,7 @@ struct crb_struct {
 	/* virtual->physical map */
 	unsigned long map_entries;
 	unsigned long map_pages;
-	struct vf_map_struct map[1];
+	struct vf_map_struct map[];
 };
 
 struct memclust_struct {
@@ -152,7 +152,7 @@ struct memdesc_struct {
 	unsigned long chksum;
 	unsigned long optional_pa;
 	unsigned long numclusters;
-	struct memclust_struct cluster[0];
+	struct memclust_struct cluster[];
 };
 
 struct dsr_struct {
diff --git a/arch/alpha/include/asm/io.h b/arch/alpha/include/asm/io.h
index c9cb554fbe54..fa3e4c246cda 100644
--- a/arch/alpha/include/asm/io.h
+++ b/arch/alpha/include/asm/io.h
@@ -10,14 +10,6 @@
 #include <asm/machvec.h>
 #include <asm/hwrpb.h>
 
-/* The generic header contains only prototypes.  Including it ensures that
-   the implementation we have here matches that interface.  */
-#include <asm-generic/iomap.h>
-
-/* We don't use IO slowdowns on the Alpha, but.. */
-#define __SLOW_DOWN_IO	do { } while (0)
-#define SLOW_DOWN_IO	do { } while (0)
-
 /*
  * Virtual -> physical identity mapping starts at this offset
  */
@@ -90,7 +82,8 @@ static inline void * phys_to_virt(unsigned long address)
 }
 #endif
 
-#define page_to_phys(page)	page_to_pa(page)
+#define virt_to_phys		virt_to_phys
+#define phys_to_virt		phys_to_virt
 
 /* Maximum PIO space address supported?  */
 #define IO_SPACE_LIMIT 0xffff
@@ -106,15 +99,15 @@ static inline void * phys_to_virt(unsigned long address)
 extern unsigned long __direct_map_base;
 extern unsigned long __direct_map_size;
 
-static inline unsigned long __deprecated virt_to_bus(volatile void *address)
+static inline unsigned long __deprecated isa_virt_to_bus(volatile void *address)
 {
 	unsigned long phys = virt_to_phys(address);
 	unsigned long bus = phys + __direct_map_base;
 	return phys <= __direct_map_size ? bus : 0;
 }
-#define isa_virt_to_bus virt_to_bus
+#define isa_virt_to_bus isa_virt_to_bus
 
-static inline void * __deprecated bus_to_virt(unsigned long address)
+static inline void * __deprecated isa_bus_to_virt(unsigned long address)
 {
 	void *virt;
 
@@ -125,7 +118,7 @@ static inline void * __deprecated bus_to_virt(unsigned long address)
 	virt = phys_to_virt(address);
 	return (long)address <= 0 ? NULL : virt;
 }
-#define isa_bus_to_virt bus_to_virt
+#define isa_bus_to_virt isa_bus_to_virt
 
 /*
  * There are different chipsets to interface the Alpha CPUs to the world.
@@ -153,6 +146,7 @@ static inline void generic_##NAME(TYPE b, QUAL void __iomem *addr)	\
 REMAP1(unsigned int, ioread8, const)
 REMAP1(unsigned int, ioread16, const)
 REMAP1(unsigned int, ioread32, const)
+REMAP1(u64, ioread64, const)
 REMAP1(u8, readb, const volatile)
 REMAP1(u16, readw, const volatile)
 REMAP1(u32, readl, const volatile)
@@ -161,6 +155,7 @@ REMAP1(u64, readq, const volatile)
 REMAP2(u8, iowrite8, /**/)
 REMAP2(u16, iowrite16, /**/)
 REMAP2(u32, iowrite32, /**/)
+REMAP2(u64, iowrite64, /**/)
 REMAP2(u8, writeb, volatile)
 REMAP2(u16, writew, volatile)
 REMAP2(u32, writel, volatile)
@@ -203,16 +198,10 @@ static inline int generic_is_mmio(const volatile void __iomem *a)
 
 #else
 
-#if defined(CONFIG_ALPHA_APECS)
-# include <asm/core_apecs.h>
-#elif defined(CONFIG_ALPHA_CIA)
+#if defined(CONFIG_ALPHA_CIA)
 # include <asm/core_cia.h>
 #elif defined(CONFIG_ALPHA_IRONGATE)
 # include <asm/core_irongate.h>
-#elif defined(CONFIG_ALPHA_JENSEN)
-# include <asm/jensen.h>
-#elif defined(CONFIG_ALPHA_LCA)
-# include <asm/core_lca.h>
 #elif defined(CONFIG_ALPHA_MARVEL)
 # include <asm/core_marvel.h>
 #elif defined(CONFIG_ALPHA_MCPCIA)
@@ -242,6 +231,12 @@ extern u32		inl(unsigned long port);
 extern void		outb(u8 b, unsigned long port);
 extern void		outw(u16 b, unsigned long port);
 extern void		outl(u32 b, unsigned long port);
+#define inb inb
+#define inw inw
+#define inl inl
+#define outb outb
+#define outw outw
+#define outl outl
 
 extern u8		readb(const volatile void __iomem *addr);
 extern u16		readw(const volatile void __iomem *addr);
@@ -251,6 +246,14 @@ extern void		writeb(u8 b, volatile void __iomem *addr);
 extern void		writew(u16 b, volatile void __iomem *addr);
 extern void		writel(u32 b, volatile void __iomem *addr);
 extern void		writeq(u64 b, volatile void __iomem *addr);
+#define readb readb
+#define readw readw
+#define readl readl
+#define readq readq
+#define writeb writeb
+#define writew writew
+#define writel writel
+#define writeq writeq
 
 extern u8		__raw_readb(const volatile void __iomem *addr);
 extern u16		__raw_readw(const volatile void __iomem *addr);
@@ -260,14 +263,33 @@ extern void		__raw_writeb(u8 b, volatile void __iomem *addr);
 extern void		__raw_writew(u16 b, volatile void __iomem *addr);
 extern void		__raw_writel(u32 b, volatile void __iomem *addr);
 extern void		__raw_writeq(u64 b, volatile void __iomem *addr);
+#define __raw_readb __raw_readb
+#define __raw_readw __raw_readw
+#define __raw_readl __raw_readl
+#define __raw_readq __raw_readq
+#define __raw_writeb __raw_writeb
+#define __raw_writew __raw_writew
+#define __raw_writel __raw_writel
+#define __raw_writeq __raw_writeq
+
+extern unsigned int ioread8(const void __iomem *);
+extern unsigned int ioread16(const void __iomem *);
+extern unsigned int ioread32(const void __iomem *);
+extern u64 ioread64(const void __iomem *);
+
+extern void iowrite8(u8, void __iomem *);
+extern void iowrite16(u16, void __iomem *);
+extern void iowrite32(u32, void __iomem *);
+extern void iowrite64(u64, void __iomem *);
+
+extern void ioread8_rep(const void __iomem *port, void *buf, unsigned long count);
+extern void ioread16_rep(const void __iomem *port, void *buf, unsigned long count);
+extern void ioread32_rep(const void __iomem *port, void *buf, unsigned long count);
+
+extern void iowrite8_rep(void __iomem *port, const void *buf, unsigned long count);
+extern void iowrite16_rep(void __iomem *port, const void *buf, unsigned long count);
+extern void iowrite32_rep(void __iomem *port, const void *buf, unsigned long count);
 
-/*
- * Mapping from port numbers to __iomem space is pretty easy.
- */
-
-/* These two have to be extern inline because of the extern prototype from
-   <asm-generic/iomap.h>.  It is not legal to mix "extern" and "static" for
-   the same declaration.  */
 extern inline void __iomem *ioport_map(unsigned long port, unsigned int size)
 {
 	return IO_CONCAT(__IO_PREFIX,ioportmap) (port);
@@ -277,13 +299,15 @@ extern inline void ioport_unmap(void __iomem *addr)
 {
 }
 
+#define ioport_map ioport_map
+#define ioport_unmap ioport_unmap
+
 static inline void __iomem *ioremap(unsigned long port, unsigned long size)
 {
 	return IO_CONCAT(__IO_PREFIX,ioremap) (port, size);
 }
 
 #define ioremap_wc ioremap
-#define ioremap_uc ioremap
 
 static inline void iounmap(volatile void __iomem *addr)
 {
@@ -358,6 +382,11 @@ extern inline void outw(u16 b, unsigned long port)
 }
 #endif
 
+#define ioread8 ioread8
+#define ioread16 ioread16
+#define iowrite8 iowrite8
+#define iowrite16 iowrite16
+
 #if IO_CONCAT(__IO_PREFIX,trivial_io_lq)
 extern inline unsigned int ioread32(const void __iomem *addr)
 {
@@ -368,12 +397,27 @@ extern inline unsigned int ioread32(const void __iomem *addr)
 	return ret;
 }
 
+extern inline u64 ioread64(const void __iomem *addr)
+{
+	unsigned int ret;
+	mb();
+	ret = IO_CONCAT(__IO_PREFIX,ioread64)(addr);
+	mb();
+	return ret;
+}
+
 extern inline void iowrite32(u32 b, void __iomem *addr)
 {
 	mb();
 	IO_CONCAT(__IO_PREFIX, iowrite32)(b, addr);
 }
 
+extern inline void iowrite64(u64 b, void __iomem *addr)
+{
+	mb();
+	IO_CONCAT(__IO_PREFIX, iowrite64)(b, addr);
+}
+
 extern inline u32 inl(unsigned long port)
 {
 	return ioread32(ioport_map(port, 4));
@@ -385,6 +429,11 @@ extern inline void outl(u32 b, unsigned long port)
 }
 #endif
 
+#define ioread32 ioread32
+#define ioread64 ioread64
+#define iowrite32 iowrite32
+#define iowrite64 iowrite64
+
 #if IO_CONCAT(__IO_PREFIX,trivial_rw_bw) == 1
 extern inline u8 __raw_readb(const volatile void __iomem *addr)
 {
@@ -491,8 +540,10 @@ extern inline void writeq(u64 b, volatile void __iomem *addr)
 
 #define ioread16be(p) swab16(ioread16(p))
 #define ioread32be(p) swab32(ioread32(p))
+#define ioread64be(p) swab64(ioread64(p))
 #define iowrite16be(v,p) iowrite16(swab16(v), (p))
 #define iowrite32be(v,p) iowrite32(swab32(v), (p))
+#define iowrite64be(v,p) iowrite64(swab64(v), (p))
 
 #define inb_p		inb
 #define inw_p		inw
@@ -505,6 +556,10 @@ extern u8 readb_relaxed(const volatile void __iomem *addr);
 extern u16 readw_relaxed(const volatile void __iomem *addr);
 extern u32 readl_relaxed(const volatile void __iomem *addr);
 extern u64 readq_relaxed(const volatile void __iomem *addr);
+#define readb_relaxed readb_relaxed
+#define readw_relaxed readw_relaxed
+#define readl_relaxed readl_relaxed
+#define readq_relaxed readq_relaxed
 
 #if IO_CONCAT(__IO_PREFIX,trivial_io_bw)
 extern inline u8 readb_relaxed(const volatile void __iomem *addr)
@@ -557,6 +612,10 @@ static inline void memsetw_io(volatile void __iomem *addr, u16 c, long len)
 	_memset_c_io(addr, 0x0001000100010001UL * c, len);
 }
 
+#define memset_io memset_io
+#define memcpy_fromio memcpy_fromio
+#define memcpy_toio memcpy_toio
+
 /*
  * String versions of in/out ops:
  */
@@ -567,40 +626,27 @@ extern void outsb (unsigned long port, const void *src, unsigned long count);
 extern void outsw (unsigned long port, const void *src, unsigned long count);
 extern void outsl (unsigned long port, const void *src, unsigned long count);
 
-/*
- * The Alpha Jensen hardware for some rather strange reason puts
- * the RTC clock at 0x170 instead of 0x70. Probably due to some
- * misguided idea about using 0x70 for NMI stuff.
- *
- * These defines will override the defaults when doing RTC queries
- */
+#define insb insb
+#define insw insw
+#define insl insl
+#define outsb outsb
+#define outsw outsw
+#define outsl outsl
 
-#ifdef CONFIG_ALPHA_GENERIC
-# define RTC_PORT(x)	((x) + alpha_mv.rtc_port)
-#else
-# ifdef CONFIG_ALPHA_JENSEN
-#  define RTC_PORT(x)	(0x170+(x))
-# else
-#  define RTC_PORT(x)	(0x70 + (x))
-# endif
-#endif
+#define RTC_PORT(x)	(0x70 + (x))
 #define RTC_ALWAYS_BCD	0
 
-/*
- * Some mucking forons use if[n]def writeq to check if platform has it.
- * It's a bloody bad idea and we probably want ARCH_HAS_WRITEQ for them
- * to play with; for now just use cpp anti-recursion logics and make sure
- * that damn thing is defined and expands to itself.
- */
-
-#define writeq writeq
-#define readq readq
-
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p)	__va(p)
+#define ioread64 ioread64
+#define iowrite64 iowrite64
+#define ioread8_rep ioread8_rep
+#define ioread16_rep ioread16_rep
+#define ioread32_rep ioread32_rep
+#define iowrite8_rep iowrite8_rep
+#define iowrite16_rep iowrite16_rep
+#define iowrite32_rep iowrite32_rep
+#define pci_iounmap pci_iounmap
+
+#include <asm-generic/io.h>
 
 #endif /* __KERNEL__ */
 
diff --git a/arch/alpha/include/asm/io_trivial.h b/arch/alpha/include/asm/io_trivial.h
index a1a29cbe02fa..00032093bcfc 100644
--- a/arch/alpha/include/asm/io_trivial.h
+++ b/arch/alpha/include/asm/io_trivial.h
@@ -6,13 +6,13 @@
 /* This file may be included multiple times.  */
 
 #if IO_CONCAT(__IO_PREFIX,trivial_io_bw)
-__EXTERN_INLINE unsigned int
+__EXTERN_INLINE u8
 IO_CONCAT(__IO_PREFIX,ioread8)(const void __iomem *a)
 {
 	return __kernel_ldbu(*(const volatile u8 __force *)a);
 }
 
-__EXTERN_INLINE unsigned int
+__EXTERN_INLINE u16
 IO_CONCAT(__IO_PREFIX,ioread16)(const void __iomem *a)
 {
 	return __kernel_ldwu(*(const volatile u16 __force *)a);
@@ -32,7 +32,7 @@ IO_CONCAT(__IO_PREFIX,iowrite16)(u16 b, void __iomem *a)
 #endif
 
 #if IO_CONCAT(__IO_PREFIX,trivial_io_lq)
-__EXTERN_INLINE unsigned int
+__EXTERN_INLINE u32
 IO_CONCAT(__IO_PREFIX,ioread32)(const void __iomem *a)
 {
 	return *(const volatile u32 __force *)a;
@@ -43,6 +43,18 @@ IO_CONCAT(__IO_PREFIX,iowrite32)(u32 b, void __iomem *a)
 {
 	*(volatile u32 __force *)a = b;
 }
+
+__EXTERN_INLINE u64
+IO_CONCAT(__IO_PREFIX,ioread64)(const void __iomem *a)
+{
+	return *(const volatile u64 __force *)a;
+}
+
+__EXTERN_INLINE void
+IO_CONCAT(__IO_PREFIX,iowrite64)(u64 b, void __iomem *a)
+{
+	*(volatile u64 __force *)a = b;
+}
 #endif
 
 #if IO_CONCAT(__IO_PREFIX,trivial_rw_bw) == 1
diff --git a/arch/alpha/include/asm/irq.h b/arch/alpha/include/asm/irq.h
index 432402c8e47f..d83b26b6660f 100644
--- a/arch/alpha/include/asm/irq.h
+++ b/arch/alpha/include/asm/irq.h
@@ -31,16 +31,11 @@
 #  define NR_IRQS      (32768 + 16)    /* marvel - 32 pids */
 # endif
 
-#elif defined(CONFIG_ALPHA_CABRIOLET) || \
-      defined(CONFIG_ALPHA_EB66P)     || \
-      defined(CONFIG_ALPHA_EB164)     || \
-      defined(CONFIG_ALPHA_PC164)     || \
+#elif defined(CONFIG_ALPHA_PC164)     || \
       defined(CONFIG_ALPHA_LX164)
 # define NR_IRQS	35
 
-#elif defined(CONFIG_ALPHA_EB66)      || \
-      defined(CONFIG_ALPHA_EB64P)     || \
-      defined(CONFIG_ALPHA_MIKASA)
+#elif defined(CONFIG_ALPHA_MIKASA)
 # define NR_IRQS	32
 
 #elif defined(CONFIG_ALPHA_ALCOR)     || \
@@ -55,7 +50,6 @@
 # define NR_IRQS	40
 
 #elif defined(CONFIG_ALPHA_DP264) || \
-      defined(CONFIG_ALPHA_LYNX)  || \
       defined(CONFIG_ALPHA_SHARK)
 # define NR_IRQS	64
 
diff --git a/arch/alpha/include/asm/irq_regs.h b/arch/alpha/include/asm/irq_regs.h
deleted file mode 100644
index 3dd9c0b70270..000000000000
--- a/arch/alpha/include/asm/irq_regs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/irq_regs.h>
diff --git a/arch/alpha/include/asm/jensen.h b/arch/alpha/include/asm/jensen.h
deleted file mode 100644
index 1c4131453db2..000000000000
--- a/arch/alpha/include/asm/jensen.h
+++ /dev/null
@@ -1,347 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ALPHA_JENSEN_H
-#define __ALPHA_JENSEN_H
-
-#include <asm/compiler.h>
-
-/*
- * Defines for the AlphaPC EISA IO and memory address space.
- */
-
-/*
- * NOTE! The memory operations do not set any memory barriers, as it's
- * not needed for cases like a frame buffer that is essentially memory-like.
- * You need to do them by hand if the operations depend on ordering.
- *
- * Similarly, the port IO operations do a "mb" only after a write operation:
- * if an mb is needed before (as in the case of doing memory mapped IO
- * first, and then a port IO operation to the same device), it needs to be
- * done by hand.
- *
- * After the above has bitten me 100 times, I'll give up and just do the
- * mb all the time, but right now I'm hoping this will work out.  Avoiding
- * mb's may potentially be a noticeable speed improvement, but I can't
- * honestly say I've tested it.
- *
- * Handling interrupts that need to do mb's to synchronize to non-interrupts
- * is another fun race area.  Don't do it (because if you do, I'll have to
- * do *everything* with interrupts disabled, ugh).
- */
-
-/*
- * EISA Interrupt Acknowledge address
- */
-#define EISA_INTA		(IDENT_ADDR + 0x100000000UL)
-
-/*
- * FEPROM addresses
- */
-#define EISA_FEPROM0		(IDENT_ADDR + 0x180000000UL)
-#define EISA_FEPROM1		(IDENT_ADDR + 0x1A0000000UL)
-
-/*
- * VL82C106 base address
- */
-#define EISA_VL82C106		(IDENT_ADDR + 0x1C0000000UL)
-
-/*
- * EISA "Host Address Extension" address (bits 25-31 of the EISA address)
- */
-#define EISA_HAE		(IDENT_ADDR + 0x1D0000000UL)
-
-/*
- * "SYSCTL" register address
- */
-#define EISA_SYSCTL		(IDENT_ADDR + 0x1E0000000UL)
-
-/*
- * "spare" register address
- */
-#define EISA_SPARE		(IDENT_ADDR + 0x1F0000000UL)
-
-/*
- * EISA memory address offset
- */
-#define EISA_MEM		(IDENT_ADDR + 0x200000000UL)
-
-/*
- * EISA IO address offset
- */
-#define EISA_IO			(IDENT_ADDR + 0x300000000UL)
-
-
-#ifdef __KERNEL__
-
-#ifndef __EXTERN_INLINE
-#define __EXTERN_INLINE extern inline
-#define __IO_EXTERN_INLINE
-#endif
-
-/*
- * Handle the "host address register". This needs to be set
- * to the high 7 bits of the EISA address.  This is also needed
- * for EISA IO addresses, which are only 16 bits wide (the
- * hae needs to be set to 0).
- *
- * HAE isn't needed for the local IO operations, though.
- */
-
-#define JENSEN_HAE_ADDRESS	EISA_HAE
-#define JENSEN_HAE_MASK		0x1ffffff
-
-__EXTERN_INLINE void jensen_set_hae(unsigned long addr)
-{
-	/* hae on the Jensen is bits 31:25 shifted right */
-	addr >>= 25;
-	if (addr != alpha_mv.hae_cache)
-		set_hae(addr);
-}
-
-#define vuip	volatile unsigned int *
-
-/*
- * IO functions
- *
- * The "local" functions are those that don't go out to the EISA bus,
- * but instead act on the VL82C106 chip directly.. This is mainly the
- * keyboard, RTC,  printer and first two serial lines..
- *
- * The local stuff makes for some complications, but it seems to be
- * gone in the PCI version. I hope I can get DEC suckered^H^H^H^H^H^H^H^H
- * convinced that I need one of the newer machines.
- */
-
-__EXTERN_INLINE unsigned int jensen_local_inb(unsigned long addr)
-{
-	return 0xff & *(vuip)((addr << 9) + EISA_VL82C106);
-}
-
-__EXTERN_INLINE void jensen_local_outb(u8 b, unsigned long addr)
-{
-	*(vuip)((addr << 9) + EISA_VL82C106) = b;
-	mb();
-}
-
-__EXTERN_INLINE unsigned int jensen_bus_inb(unsigned long addr)
-{
-	long result;
-
-	jensen_set_hae(0);
-	result = *(volatile int *)((addr << 7) + EISA_IO + 0x00);
-	return __kernel_extbl(result, addr & 3);
-}
-
-__EXTERN_INLINE void jensen_bus_outb(u8 b, unsigned long addr)
-{
-	jensen_set_hae(0);
-	*(vuip)((addr << 7) + EISA_IO + 0x00) = b * 0x01010101;
-	mb();
-}
-
-/*
- * It seems gcc is not very good at optimizing away logical
- * operations that result in operations across inline functions.
- * Which is why this is a macro.
- */
-
-#define jensen_is_local(addr) ( \
-/* keyboard */	(addr == 0x60 || addr == 0x64) || \
-/* RTC */	(addr == 0x170 || addr == 0x171) || \
-/* mb COM2 */	(addr >= 0x2f8 && addr <= 0x2ff) || \
-/* mb LPT1 */	(addr >= 0x3bc && addr <= 0x3be) || \
-/* mb COM2 */	(addr >= 0x3f8 && addr <= 0x3ff))
-
-__EXTERN_INLINE u8 jensen_inb(unsigned long addr)
-{
-	if (jensen_is_local(addr))
-		return jensen_local_inb(addr);
-	else
-		return jensen_bus_inb(addr);
-}
-
-__EXTERN_INLINE void jensen_outb(u8 b, unsigned long addr)
-{
-	if (jensen_is_local(addr))
-		jensen_local_outb(b, addr);
-	else
-		jensen_bus_outb(b, addr);
-}
-
-__EXTERN_INLINE u16 jensen_inw(unsigned long addr)
-{
-	long result;
-
-	jensen_set_hae(0);
-	result = *(volatile int *) ((addr << 7) + EISA_IO + 0x20);
-	result >>= (addr & 3) * 8;
-	return 0xffffUL & result;
-}
-
-__EXTERN_INLINE u32 jensen_inl(unsigned long addr)
-{
-	jensen_set_hae(0);
-	return *(vuip) ((addr << 7) + EISA_IO + 0x60);
-}
-
-__EXTERN_INLINE void jensen_outw(u16 b, unsigned long addr)
-{
-	jensen_set_hae(0);
-	*(vuip) ((addr << 7) + EISA_IO + 0x20) = b * 0x00010001;
-	mb();
-}
-
-__EXTERN_INLINE void jensen_outl(u32 b, unsigned long addr)
-{
-	jensen_set_hae(0);
-	*(vuip) ((addr << 7) + EISA_IO + 0x60) = b;
-	mb();
-}
-
-/*
- * Memory functions.
- */
-
-__EXTERN_INLINE u8 jensen_readb(const volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	long result;
-
-	jensen_set_hae(addr);
-	addr &= JENSEN_HAE_MASK;
-	result = *(volatile int *) ((addr << 7) + EISA_MEM + 0x00);
-	result >>= (addr & 3) * 8;
-	return 0xffUL & result;
-}
-
-__EXTERN_INLINE u16 jensen_readw(const volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	long result;
-
-	jensen_set_hae(addr);
-	addr &= JENSEN_HAE_MASK;
-	result = *(volatile int *) ((addr << 7) + EISA_MEM + 0x20);
-	result >>= (addr & 3) * 8;
-	return 0xffffUL & result;
-}
-
-__EXTERN_INLINE u32 jensen_readl(const volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	jensen_set_hae(addr);
-	addr &= JENSEN_HAE_MASK;
-	return *(vuip) ((addr << 7) + EISA_MEM + 0x60);
-}
-
-__EXTERN_INLINE u64 jensen_readq(const volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long r0, r1;
-
-	jensen_set_hae(addr);
-	addr &= JENSEN_HAE_MASK;
-	addr = (addr << 7) + EISA_MEM + 0x60;
-	r0 = *(vuip) (addr);
-	r1 = *(vuip) (addr + (4 << 7));
-	return r1 << 32 | r0;
-}
-
-__EXTERN_INLINE void jensen_writeb(u8 b, volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	jensen_set_hae(addr);
-	addr &= JENSEN_HAE_MASK;
-	*(vuip) ((addr << 7) + EISA_MEM + 0x00) = b * 0x01010101;
-}
-
-__EXTERN_INLINE void jensen_writew(u16 b, volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	jensen_set_hae(addr);
-	addr &= JENSEN_HAE_MASK;
-	*(vuip) ((addr << 7) + EISA_MEM + 0x20) = b * 0x00010001;
-}
-
-__EXTERN_INLINE void jensen_writel(u32 b, volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	jensen_set_hae(addr);
-	addr &= JENSEN_HAE_MASK;
-	*(vuip) ((addr << 7) + EISA_MEM + 0x60) = b;
-}
-
-__EXTERN_INLINE void jensen_writeq(u64 b, volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	jensen_set_hae(addr);
-	addr &= JENSEN_HAE_MASK;
-	addr = (addr << 7) + EISA_MEM + 0x60;
-	*(vuip) (addr) = b;
-	*(vuip) (addr + (4 << 7)) = b >> 32;
-}
-
-__EXTERN_INLINE void __iomem *jensen_ioportmap(unsigned long addr)
-{
-	return (void __iomem *)addr;
-}
-
-__EXTERN_INLINE void __iomem *jensen_ioremap(unsigned long addr,
-					     unsigned long size)
-{
-	return (void __iomem *)(addr + 0x100000000ul);
-}
-
-__EXTERN_INLINE int jensen_is_ioaddr(unsigned long addr)
-{
-	return (long)addr >= 0;
-}
-
-__EXTERN_INLINE int jensen_is_mmio(const volatile void __iomem *addr)
-{
-	return (unsigned long)addr >= 0x100000000ul;
-}
-
-/* New-style ioread interface.  All the routines are so ugly for Jensen
-   that it doesn't make sense to merge them.  */
-
-#define IOPORT(OS, NS)							\
-__EXTERN_INLINE unsigned int jensen_ioread##NS(const void __iomem *xaddr)	\
-{									\
-	if (jensen_is_mmio(xaddr))					\
-		return jensen_read##OS(xaddr - 0x100000000ul);		\
-	else								\
-		return jensen_in##OS((unsigned long)xaddr);		\
-}									\
-__EXTERN_INLINE void jensen_iowrite##NS(u##NS b, void __iomem *xaddr)	\
-{									\
-	if (jensen_is_mmio(xaddr))					\
-		jensen_write##OS(b, xaddr - 0x100000000ul);		\
-	else								\
-		jensen_out##OS(b, (unsigned long)xaddr);		\
-}
-
-IOPORT(b, 8)
-IOPORT(w, 16)
-IOPORT(l, 32)
-
-#undef IOPORT
-
-#undef vuip
-
-#undef __IO_PREFIX
-#define __IO_PREFIX		jensen
-#define jensen_trivial_rw_bw	0
-#define jensen_trivial_rw_lq	0
-#define jensen_trivial_io_bw	0
-#define jensen_trivial_io_lq	0
-#define jensen_trivial_iounmap	1
-#include <asm/io_trivial.h>
-
-#ifdef __IO_EXTERN_INLINE
-#undef __EXTERN_INLINE
-#undef __IO_EXTERN_INLINE
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* __ALPHA_JENSEN_H */
diff --git a/arch/alpha/include/asm/kdebug.h b/arch/alpha/include/asm/kdebug.h
deleted file mode 100644
index 6ece1b037665..000000000000
--- a/arch/alpha/include/asm/kdebug.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/kdebug.h>
diff --git a/arch/alpha/include/asm/local.h b/arch/alpha/include/asm/local.h
index fab26a1c93d5..88eb398947a5 100644
--- a/arch/alpha/include/asm/local.h
+++ b/arch/alpha/include/asm/local.h
@@ -52,33 +52,40 @@ static __inline__ long local_sub_return(long i, local_t * l)
 	return result;
 }
 
-#define local_cmpxchg(l, o, n) \
-	(cmpxchg_local(&((l)->a.counter), (o), (n)))
+static __inline__ long local_cmpxchg(local_t *l, long old, long new)
+{
+	return cmpxchg_local(&l->a.counter, old, new);
+}
+
+static __inline__ bool local_try_cmpxchg(local_t *l, long *old, long new)
+{
+	return try_cmpxchg_local(&l->a.counter, (s64 *)old, new);
+}
+
 #define local_xchg(l, n) (xchg_local(&((l)->a.counter), (n)))
 
 /**
- * local_add_unless - add unless the number is a given value
+ * local_add_unless - add unless the number is already a given value
  * @l: pointer of type local_t
  * @a: the amount to add to l...
  * @u: ...unless l is equal to u.
  *
- * Atomically adds @a to @l, so long as it was not @u.
- * Returns non-zero if @l was not @u, and zero otherwise.
+ * Atomically adds @a to @l, if @v was not already @u.
+ * Returns true if the addition was done.
  */
-#define local_add_unless(l, a, u)				\
-({								\
-	long c, old;						\
-	c = local_read(l);					\
-	for (;;) {						\
-		if (unlikely(c == (u)))				\
-			break;					\
-		old = local_cmpxchg((l), c, c + (a));	\
-		if (likely(old == c))				\
-			break;					\
-		c = old;					\
-	}							\
-	c != (u);						\
-})
+static __inline__ bool
+local_add_unless(local_t *l, long a, long u)
+{
+	long c = local_read(l);
+
+	do {
+		if (unlikely(c == u))
+			return false;
+	} while (!local_try_cmpxchg(l, &c, c + a));
+
+	return true;
+}
+
 #define local_inc_not_zero(l) local_add_unless((l), 1, 0)
 
 #define local_add_negative(a, l) (local_add_return((a), (l)) < 0)
diff --git a/arch/alpha/include/asm/machvec.h b/arch/alpha/include/asm/machvec.h
index e49fabce7b33..490fc880bb3f 100644
--- a/arch/alpha/include/asm/machvec.h
+++ b/arch/alpha/include/asm/machvec.h
@@ -46,13 +46,15 @@ struct alpha_machine_vector
 	void (*mv_pci_tbi)(struct pci_controller *hose,
 			   dma_addr_t start, dma_addr_t end);
 
-	unsigned int (*mv_ioread8)(const void __iomem *);
-	unsigned int (*mv_ioread16)(const void __iomem *);
-	unsigned int (*mv_ioread32)(const void __iomem *);
+	u8 (*mv_ioread8)(const void __iomem *);
+	u16 (*mv_ioread16)(const void __iomem *);
+	u32 (*mv_ioread32)(const void __iomem *);
+	u64 (*mv_ioread64)(const void __iomem *);
 
 	void (*mv_iowrite8)(u8, void __iomem *);
 	void (*mv_iowrite16)(u16, void __iomem *);
 	void (*mv_iowrite32)(u32, void __iomem *);
+	void (*mv_iowrite64)(u64, void __iomem *);
 
 	u8 (*mv_readb)(const volatile void __iomem *);
 	u16 (*mv_readw)(const volatile void __iomem *);
@@ -70,15 +72,6 @@ struct alpha_machine_vector
 	int (*mv_is_ioaddr)(unsigned long);
 	int (*mv_is_mmio)(const volatile void __iomem *);
 
-	void (*mv_switch_mm)(struct mm_struct *, struct mm_struct *,
-			     struct task_struct *);
-	void (*mv_activate_mm)(struct mm_struct *, struct mm_struct *);
-
-	void (*mv_flush_tlb_current)(struct mm_struct *);
-	void (*mv_flush_tlb_current_page)(struct mm_struct * mm,
-					  struct vm_area_struct *vma,
-					  unsigned long addr);
-
 	void (*update_irq_hw)(unsigned long, unsigned long, int);
 	void (*ack_irq)(unsigned long);
 	void (*device_interrupt)(unsigned long vector);
diff --git a/arch/alpha/include/asm/mmu_context.h b/arch/alpha/include/asm/mmu_context.h
index 4eea7c616992..eee8fe836a59 100644
--- a/arch/alpha/include/asm/mmu_context.h
+++ b/arch/alpha/include/asm/mmu_context.h
@@ -71,9 +71,7 @@ __reload_thread(struct pcb_struct *pcb)
 #ifdef CONFIG_ALPHA_GENERIC
 # define MAX_ASN	(alpha_mv.max_asn)
 #else
-# ifdef CONFIG_ALPHA_EV4
-#  define MAX_ASN	EV4_MAX_ASN
-# elif defined(CONFIG_ALPHA_EV5)
+# if defined(CONFIG_ALPHA_EV56)
 #  define MAX_ASN	EV5_MAX_ASN
 # else
 #  define MAX_ASN	EV6_MAX_ASN
@@ -162,27 +160,9 @@ ev5_switch_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm,
 	task_thread_info(next)->pcb.asn = mmc & HARDWARE_ASN_MASK;
 }
 
-__EXTERN_INLINE void
-ev4_switch_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm,
-	      struct task_struct *next)
-{
-	/* As described, ASN's are broken for TLB usage.  But we can
-	   optimize for switching between threads -- if the mm is
-	   unchanged from current we needn't flush.  */
-	/* ??? May not be needed because EV4 PALcode recognizes that
-	   ASN's are broken and does a tbiap itself on swpctx, under
-	   the "Must set ASN or flush" rule.  At least this is true
-	   for a 1992 SRM, reports Joseph Martin (jmartin@hlo.dec.com).
-	   I'm going to leave this here anyway, just to Be Sure.  -- r~  */
-	if (prev_mm != next_mm)
-		tbiap();
-
-	/* Do continue to allocate ASNs, because we can still use them
-	   to avoid flushing the icache.  */
-	ev5_switch_mm(prev_mm, next_mm, next);
-}
-
 extern void __load_new_mm_context(struct mm_struct *);
+asmlinkage void do_page_fault(unsigned long address, unsigned long mmcsr,
+			      long cause, struct pt_regs *regs);
 
 #ifdef CONFIG_SMP
 #define check_mmu_context()					\
@@ -207,25 +187,8 @@ ev5_activate_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm)
 	__load_new_mm_context(next_mm);
 }
 
-__EXTERN_INLINE void
-ev4_activate_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm)
-{
-	__load_new_mm_context(next_mm);
-	tbiap();
-}
-
-#ifdef CONFIG_ALPHA_GENERIC
-# define switch_mm(a,b,c)	alpha_mv.mv_switch_mm((a),(b),(c))
-# define activate_mm(x,y)	alpha_mv.mv_activate_mm((x),(y))
-#else
-# ifdef CONFIG_ALPHA_EV4
-#  define switch_mm(a,b,c)	ev4_switch_mm((a),(b),(c))
-#  define activate_mm(x,y)	ev4_activate_mm((x),(y))
-# else
-#  define switch_mm(a,b,c)	ev5_switch_mm((a),(b),(c))
-#  define activate_mm(x,y)	ev5_activate_mm((x),(y))
-# endif
-#endif
+#define switch_mm(a,b,c)	ev5_switch_mm((a),(b),(c))
+#define activate_mm(x,y)	ev5_activate_mm((x),(y))
 
 #define init_new_context init_new_context
 static inline int
diff --git a/arch/alpha/include/asm/page.h b/arch/alpha/include/asm/page.h
index 18f48a6f2ff6..5ec4c77e432e 100644
--- a/arch/alpha/include/asm/page.h
+++ b/arch/alpha/include/asm/page.h
@@ -4,11 +4,7 @@
 
 #include <linux/const.h>
 #include <asm/pal.h>
-
-/* PAGE_SHIFT determines the page size */
-#define PAGE_SHIFT	13
-#define PAGE_SIZE	(_AC(1,UL) << PAGE_SHIFT)
-#define PAGE_MASK	(~(PAGE_SIZE-1))
+#include <vdso/page.h>
 
 #ifndef __ASSEMBLY__
 
@@ -17,9 +13,8 @@
 extern void clear_page(void *page);
 #define clear_user_page(page, vaddr, pg)	clear_page(page)
 
-#define alloc_zeroed_user_highpage_movable(vma, vaddr) \
-	alloc_page_vma(GFP_HIGHUSER_MOVABLE | __GFP_ZERO, vma, vmaddr)
-#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE_MOVABLE
+#define vma_alloc_zeroed_movable_folio(vma, vaddr) \
+	vma_alloc_folio(GFP_HIGHUSER_MOVABLE | __GFP_ZERO, 0, vma, vaddr)
 
 extern void copy_page(void * _to, void * _from);
 #define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
@@ -87,10 +82,6 @@ typedef struct page *pgtable_t;
 #define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
 #define virt_addr_valid(kaddr)	pfn_valid((__pa(kaddr) >> PAGE_SHIFT))
 
-#ifdef CONFIG_FLATMEM
-#define pfn_valid(pfn)		((pfn) < max_mapnr)
-#endif /* CONFIG_FLATMEM */
-
 #include <asm-generic/memory_model.h>
 #include <asm-generic/getorder.h>
 
diff --git a/arch/alpha/include/asm/param.h b/arch/alpha/include/asm/param.h
deleted file mode 100644
index cfe947ce9461..000000000000
--- a/arch/alpha/include/asm/param.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_ALPHA_PARAM_H
-#define _ASM_ALPHA_PARAM_H
-
-#include <uapi/asm/param.h>
-
-# undef HZ
-# define HZ		CONFIG_HZ
-# define USER_HZ	1024
-# define CLOCKS_PER_SEC	USER_HZ	/* frequency at which times() counts */
-
-#endif /* _ASM_ALPHA_PARAM_H */
diff --git a/arch/alpha/include/asm/pci.h b/arch/alpha/include/asm/pci.h
index cf6bc1e64d66..6c04fcbdc8ed 100644
--- a/arch/alpha/include/asm/pci.h
+++ b/arch/alpha/include/asm/pci.h
@@ -56,12 +56,6 @@ struct pci_controller {
 
 /* IOMMU controls.  */
 
-/* TODO: integrate with include/asm-generic/pci.h ? */
-static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
-{
-	return channel ? 15 : 14;
-}
-
 #define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index
 
 static inline int pci_proc_domain(struct pci_bus *bus)
@@ -94,7 +88,4 @@ extern void pci_adjust_legacy_attr(struct pci_bus *bus,
 				   enum pci_mmap_state mmap_type);
 #define HAVE_PCI_LEGACY	1
 
-extern int pci_create_resource_files(struct pci_dev *dev);
-extern void pci_remove_resource_files(struct pci_dev *dev);
-
 #endif /* __ALPHA_PCI_H */
diff --git a/arch/alpha/include/asm/percpu.h b/arch/alpha/include/asm/percpu.h
index 6923249f2d49..4383d66341dc 100644
--- a/arch/alpha/include/asm/percpu.h
+++ b/arch/alpha/include/asm/percpu.h
@@ -9,10 +9,9 @@
  * way above 4G.
  *
  * Always use weak definitions for percpu variables in modules.
+ * Therefore, we have enabled CONFIG_ARCH_MODULE_NEEDS_WEAK_PER_CPU
+ * in the Kconfig.
  */
-#if defined(MODULE) && defined(CONFIG_SMP)
-#define ARCH_NEEDS_WEAK_PER_CPU
-#endif
 
 #include <asm-generic/percpu.h>
 
diff --git a/arch/alpha/include/asm/pgtable.h b/arch/alpha/include/asm/pgtable.h
index 02f0429f1068..90e7a9539102 100644
--- a/arch/alpha/include/asm/pgtable.h
+++ b/arch/alpha/include/asm/pgtable.h
@@ -26,7 +26,6 @@ struct vm_area_struct;
  * hook is made available.
  */
 #define set_pte(pteptr, pteval) ((*(pteptr)) = (pteval))
-#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
 
 /* PMD_SHIFT determines the size of the area a second-level page table can map */
 #define PMD_SHIFT	(PAGE_SHIFT + (PAGE_SHIFT-3))
@@ -74,6 +73,9 @@ struct vm_area_struct;
 #define _PAGE_DIRTY	0x20000
 #define _PAGE_ACCESSED	0x40000
 
+/* We borrow bit 39 to store the exclusive marker in swap PTEs. */
+#define _PAGE_SWP_EXCLUSIVE	0x8000000000UL
+
 /*
  * NOTE! The "accessed" bit isn't necessarily exact:  it can be kept exactly
  * by software (use the KRE/URE/KWE/UWE bits appropriately), but I'll fake it.
@@ -105,7 +107,7 @@ struct vm_area_struct;
 
 #define _PAGE_NORMAL(x) __pgprot(_PAGE_VALID | __ACCESS_BITS | (x))
 
-#define _PAGE_P(x) _PAGE_NORMAL((x) | (((x) & _PAGE_FOW)?0:_PAGE_FOW))
+#define _PAGE_P(x) _PAGE_NORMAL((x) | _PAGE_FOW)
 #define _PAGE_S(x) _PAGE_NORMAL(x)
 
 /*
@@ -116,23 +118,6 @@ struct vm_area_struct;
  * arch/alpha/mm/fault.c)
  */
 	/* xwr */
-#define __P000	_PAGE_P(_PAGE_FOE | _PAGE_FOW | _PAGE_FOR)
-#define __P001	_PAGE_P(_PAGE_FOE | _PAGE_FOW)
-#define __P010	_PAGE_P(_PAGE_FOE)
-#define __P011	_PAGE_P(_PAGE_FOE)
-#define __P100	_PAGE_P(_PAGE_FOW | _PAGE_FOR)
-#define __P101	_PAGE_P(_PAGE_FOW)
-#define __P110	_PAGE_P(0)
-#define __P111	_PAGE_P(0)
-
-#define __S000	_PAGE_S(_PAGE_FOE | _PAGE_FOW | _PAGE_FOR)
-#define __S001	_PAGE_S(_PAGE_FOE | _PAGE_FOW)
-#define __S010	_PAGE_S(_PAGE_FOE)
-#define __S011	_PAGE_S(_PAGE_FOE)
-#define __S100	_PAGE_S(_PAGE_FOW | _PAGE_FOR)
-#define __S101	_PAGE_S(_PAGE_FOW)
-#define __S110	_PAGE_S(0)
-#define __S111	_PAGE_S(0)
 
 /*
  * pgprot_noncached() is only for infiniband pci support, and a real
@@ -141,34 +126,11 @@ struct vm_area_struct;
 #define pgprot_noncached(prot)	(prot)
 
 /*
- * BAD_PAGETABLE is used when we need a bogus page-table, while
- * BAD_PAGE is used for a bogus page.
- *
  * ZERO_PAGE is a global shared page that is always zero:  used
  * for zero-mapped memory areas etc..
  */
-extern pte_t __bad_page(void);
-extern pmd_t * __bad_pagetable(void);
-
-extern unsigned long __zero_page(void);
-
-#define BAD_PAGETABLE	__bad_pagetable()
-#define BAD_PAGE	__bad_page()
 #define ZERO_PAGE(vaddr)	(virt_to_page(ZERO_PGE))
 
-/* number of bits that fit into a memory pointer */
-#define BITS_PER_PTR			(8*sizeof(unsigned long))
-
-/* to align the pointer to a pointer address */
-#define PTR_MASK			(~(sizeof(void*)-1))
-
-/* sizeof(void*)==1<<SIZEOF_PTR_LOG2 */
-#define SIZEOF_PTR_LOG2			3
-
-/* to find an entry in a page-table */
-#define PAGE_PTR(address)		\
-  ((unsigned long)(address)>>(PAGE_SHIFT-SIZEOF_PTR_LOG2)&PTR_MASK&~PAGE_MASK)
-
 /*
  * On certain platforms whose physical address space can overlap KSEG,
  * namely EV6 and above, we must re-twiddle the physaddr to restore the
@@ -203,16 +165,10 @@ extern unsigned long __zero_page(void);
  * and a page entry and page directory to the page they refer to.
  */
 #define page_to_pa(page)	(page_to_pfn(page) << PAGE_SHIFT)
-#define pte_pfn(pte)	(pte_val(pte) >> 32)
+#define PFN_PTE_SHIFT		32
+#define pte_pfn(pte)		(pte_val(pte) >> PFN_PTE_SHIFT)
 
 #define pte_page(pte)	pfn_to_page(pte_pfn(pte))
-#define mk_pte(page, pgprot)						\
-({									\
-	pte_t pte;							\
-									\
-	pte_val(pte) = (page_to_pfn(page) << 32) | pgprot_val(pgprot);	\
-	pte;								\
-})
 
 extern inline pte_t pfn_pte(unsigned long physpfn, pgprot_t pgprot)
 { pte_t pte; pte_val(pte) = (PHYS_TWIDDLE(physpfn) << 32) | pgprot_val(pgprot); return pte; }
@@ -233,6 +189,7 @@ pmd_page_vaddr(pmd_t pmd)
 	return ((pmd_val(pmd) & _PFN_MASK) >> (32-PAGE_SHIFT)) + PAGE_OFFSET;
 }
 
+#define pmd_pfn(pmd)	(pmd_val(pmd) >> 32)
 #define pmd_page(pmd)	(pfn_to_page(pmd_val(pmd) >> 32))
 #define pud_page(pud)	(pfn_to_page(pud_val(pud) >> 32))
 
@@ -269,7 +226,7 @@ extern inline int pte_young(pte_t pte)		{ return pte_val(pte) & _PAGE_ACCESSED;
 extern inline pte_t pte_wrprotect(pte_t pte)	{ pte_val(pte) |= _PAGE_FOW; return pte; }
 extern inline pte_t pte_mkclean(pte_t pte)	{ pte_val(pte) &= ~(__DIRTY_BITS); return pte; }
 extern inline pte_t pte_mkold(pte_t pte)	{ pte_val(pte) &= ~(__ACCESS_BITS); return pte; }
-extern inline pte_t pte_mkwrite(pte_t pte)	{ pte_val(pte) &= ~_PAGE_FOW; return pte; }
+extern inline pte_t pte_mkwrite_novma(pte_t pte){ pte_val(pte) &= ~_PAGE_FOW; return pte; }
 extern inline pte_t pte_mkdirty(pte_t pte)	{ pte_val(pte) |= __DIRTY_BITS; return pte; }
 extern inline pte_t pte_mkyoung(pte_t pte)	{ pte_val(pte) |= __ACCESS_BITS; return pte; }
 
@@ -316,20 +273,53 @@ extern inline void update_mmu_cache(struct vm_area_struct * vma,
 {
 }
 
+static inline void update_mmu_cache_range(struct vm_fault *vmf,
+		struct vm_area_struct *vma, unsigned long address,
+		pte_t *ptep, unsigned int nr)
+{
+}
+
 /*
- * Non-present pages:  high 24 bits are offset, next 8 bits type,
- * low 32 bits zero.
+ * Encode/decode swap entries and swap PTEs. Swap PTEs are all PTEs that
+ * are !pte_none() && !pte_present().
+ *
+ * Format of swap PTEs:
+ *
+ *   6 6 6 6 5 5 5 5 5 5 5 5 5 5 4 4 4 4 4 4 4 4 4 4 3 3 3 3 3 3 3 3
+ *   3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2
+ *   <------------------- offset ------------------> E <--- type -->
+ *
+ *   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
+ *   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ *   <--------------------------- zeroes -------------------------->
+ *
+ *   E is the exclusive marker that is not stored in swap entries.
  */
 extern inline pte_t mk_swap_pte(unsigned long type, unsigned long offset)
-{ pte_t pte; pte_val(pte) = (type << 32) | (offset << 40); return pte; }
+{ pte_t pte; pte_val(pte) = ((type & 0x7f) << 32) | (offset << 40); return pte; }
 
-#define __swp_type(x)		(((x).val >> 32) & 0xff)
+#define __swp_type(x)		(((x).val >> 32) & 0x7f)
 #define __swp_offset(x)		((x).val >> 40)
 #define __swp_entry(type, off)	((swp_entry_t) { pte_val(mk_swap_pte((type), (off))) })
 #define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
 #define __swp_entry_to_pte(x)	((pte_t) { (x).val })
 
-#define kern_addr_valid(addr)	(1)
+static inline bool pte_swp_exclusive(pte_t pte)
+{
+	return pte_val(pte) & _PAGE_SWP_EXCLUSIVE;
+}
+
+static inline pte_t pte_swp_mkexclusive(pte_t pte)
+{
+	pte_val(pte) |= _PAGE_SWP_EXCLUSIVE;
+	return pte;
+}
+
+static inline pte_t pte_swp_clear_exclusive(pte_t pte)
+{
+	pte_val(pte) &= ~_PAGE_SWP_EXCLUSIVE;
+	return pte;
+}
 
 #define pte_ERROR(e) \
 	printk("%s:%d: bad pte %016lx.\n", __FILE__, __LINE__, pte_val(e))
@@ -340,7 +330,7 @@ extern inline pte_t mk_swap_pte(unsigned long type, unsigned long offset)
 
 extern void paging_init(void);
 
-/* We have our own get_unmapped_area to cope with ADDR_LIMIT_32BIT.  */
+/* We have our own get_unmapped_area */
 #define HAVE_ARCH_UNMAPPED_AREA
 
 #endif /* _ALPHA_PGTABLE_H */
diff --git a/arch/alpha/include/asm/processor.h b/arch/alpha/include/asm/processor.h
index 6100431da07a..5dce5518a211 100644
--- a/arch/alpha/include/asm/processor.h
+++ b/arch/alpha/include/asm/processor.h
@@ -8,27 +8,19 @@
 #ifndef __ASM_ALPHA_PROCESSOR_H
 #define __ASM_ALPHA_PROCESSOR_H
 
-#include <linux/personality.h>	/* for ADDR_LIMIT_32BIT */
-
 /*
  * We have a 42-bit user address space: 4TB user VM...
  */
 #define TASK_SIZE (0x40000000000UL)
 
-#define STACK_TOP \
-  (current->personality & ADDR_LIMIT_32BIT ? 0x80000000 : 0x00120000000UL)
+#define STACK_TOP (0x00120000000UL)
 
 #define STACK_TOP_MAX	0x00120000000UL
 
 /* This decides where the kernel will search for a free chunk of vm
  * space during mmap's.
  */
-#define TASK_UNMAPPED_BASE \
-  ((current->personality & ADDR_LIMIT_32BIT) ? 0x40000000 : TASK_SIZE / 2)
-
-typedef struct {
-	unsigned long seg;
-} mm_segment_t;
+#define TASK_UNMAPPED_BASE (TASK_SIZE / 2)
 
 /* This is dead.  Everything has been moved to thread_info.  */
 struct thread_struct { };
@@ -40,9 +32,7 @@ extern void start_thread(struct pt_regs *, unsigned long, unsigned long);
 
 /* Free all resources held by a thread. */
 struct task_struct;
-extern void release_thread(struct task_struct *);
-
-unsigned long get_wchan(struct task_struct *p);
+unsigned long __get_wchan(struct task_struct *p);
 
 #define KSTK_EIP(tsk) (task_pt_regs(tsk)->pc)
 
@@ -53,12 +43,6 @@ unsigned long get_wchan(struct task_struct *p);
 
 #define ARCH_HAS_PREFETCH
 #define ARCH_HAS_PREFETCHW
-#define ARCH_HAS_SPINLOCK_PREFETCH
-
-#ifndef CONFIG_SMP
-/* Nothing to prefetch. */
-#define spin_lock_prefetch(lock)  	do { } while (0)
-#endif
 
 extern inline void prefetch(const void *ptr)  
 { 
@@ -70,11 +54,4 @@ extern inline void prefetchw(const void *ptr)
 	__builtin_prefetch(ptr, 1, 3);
 }
 
-#ifdef CONFIG_SMP
-extern inline void spin_lock_prefetch(const void *ptr)  
-{
-	__builtin_prefetch(ptr, 1, 3);
-}
-#endif
-
 #endif /* __ASM_ALPHA_PROCESSOR_H */
diff --git a/arch/alpha/include/asm/ptrace.h b/arch/alpha/include/asm/ptrace.h
index df5f317ab3fc..3557ce64ed21 100644
--- a/arch/alpha/include/asm/ptrace.h
+++ b/arch/alpha/include/asm/ptrace.h
@@ -16,7 +16,6 @@
 
 #define current_pt_regs() \
   ((struct pt_regs *) ((char *)current_thread_info() + 2*PAGE_SIZE) - 1)
-#define signal_pt_regs current_pt_regs
 
 #define force_successful_syscall_return() (current_pt_regs()->r0 = 0)
 
diff --git a/arch/alpha/include/asm/special_insns.h b/arch/alpha/include/asm/special_insns.h
index ca2c5c30b22e..798d0bdb11f9 100644
--- a/arch/alpha/include/asm/special_insns.h
+++ b/arch/alpha/include/asm/special_insns.h
@@ -15,10 +15,7 @@ enum implver_enum {
    (enum implver_enum) __implver; })
 #else
 /* Try to eliminate some dead code.  */
-#ifdef CONFIG_ALPHA_EV4
-#define implver() IMPLVER_EV4
-#endif
-#ifdef CONFIG_ALPHA_EV5
+#ifdef CONFIG_ALPHA_EV56
 #define implver() IMPLVER_EV5
 #endif
 #if defined(CONFIG_ALPHA_EV6)
diff --git a/arch/alpha/include/asm/spinlock_types.h b/arch/alpha/include/asm/spinlock_types.h
index 1d5716bc060b..05a444d77c53 100644
--- a/arch/alpha/include/asm/spinlock_types.h
+++ b/arch/alpha/include/asm/spinlock_types.h
@@ -2,8 +2,8 @@
 #ifndef _ALPHA_SPINLOCK_TYPES_H
 #define _ALPHA_SPINLOCK_TYPES_H
 
-#ifndef __LINUX_SPINLOCK_TYPES_H
-# error "please don't include this file directly"
+#ifndef __LINUX_SPINLOCK_TYPES_RAW_H
+# error "Please do not include this file directly."
 #endif
 
 typedef struct {
diff --git a/arch/alpha/include/asm/termios.h b/arch/alpha/include/asm/termios.h
deleted file mode 100644
index b7c77bb1bfd2..000000000000
--- a/arch/alpha/include/asm/termios.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ALPHA_TERMIOS_H
-#define _ALPHA_TERMIOS_H
-
-#include <uapi/asm/termios.h>
-
-/*	eof=^D		eol=\0		eol2=\0		erase=del
-	werase=^W	kill=^U		reprint=^R	sxtc=\0
-	intr=^C		quit=^\		susp=^Z		<OSF/1 VDSUSP>
-	start=^Q	stop=^S		lnext=^V	discard=^U
-	vmin=\1		vtime=\0
-*/
-#define INIT_C_CC "\004\000\000\177\027\025\022\000\003\034\032\000\021\023\026\025\001\000"
-
-/*
- * Translate a "termio" structure into a "termios". Ugh.
- */
-
-#define user_termio_to_kernel_termios(a_termios, u_termio)			\
-({										\
-	struct ktermios *k_termios = (a_termios);				\
-	struct termio k_termio;							\
-	int canon, ret;								\
-										\
-	ret = copy_from_user(&k_termio, u_termio, sizeof(k_termio));		\
-	if (!ret) {								\
-		/* Overwrite only the low bits.  */				\
-		*(unsigned short *)&k_termios->c_iflag = k_termio.c_iflag;	\
-		*(unsigned short *)&k_termios->c_oflag = k_termio.c_oflag;	\
-		*(unsigned short *)&k_termios->c_cflag = k_termio.c_cflag;	\
-		*(unsigned short *)&k_termios->c_lflag = k_termio.c_lflag;	\
-		canon = k_termio.c_lflag & ICANON;				\
-										\
-		k_termios->c_cc[VINTR]  = k_termio.c_cc[_VINTR];		\
-		k_termios->c_cc[VQUIT]  = k_termio.c_cc[_VQUIT];		\
-		k_termios->c_cc[VERASE] = k_termio.c_cc[_VERASE];		\
-		k_termios->c_cc[VKILL]  = k_termio.c_cc[_VKILL];		\
-		k_termios->c_cc[VEOL2]  = k_termio.c_cc[_VEOL2];		\
-		k_termios->c_cc[VSWTC]  = k_termio.c_cc[_VSWTC];		\
-		k_termios->c_cc[canon ? VEOF : VMIN]  = k_termio.c_cc[_VEOF];	\
-		k_termios->c_cc[canon ? VEOL : VTIME] = k_termio.c_cc[_VEOL];	\
-	}									\
-	ret;									\
-})
-
-/*
- * Translate a "termios" structure into a "termio". Ugh.
- *
- * Note the "fun" _VMIN overloading.
- */
-#define kernel_termios_to_user_termio(u_termio, a_termios)		\
-({									\
-	struct ktermios *k_termios = (a_termios);			\
-	struct termio k_termio;						\
-	int canon;							\
-									\
-	k_termio.c_iflag = k_termios->c_iflag;				\
-	k_termio.c_oflag = k_termios->c_oflag;				\
-	k_termio.c_cflag = k_termios->c_cflag;				\
-	canon = (k_termio.c_lflag = k_termios->c_lflag) & ICANON;	\
-									\
-	k_termio.c_line = k_termios->c_line;				\
-	k_termio.c_cc[_VINTR]  = k_termios->c_cc[VINTR];		\
-	k_termio.c_cc[_VQUIT]  = k_termios->c_cc[VQUIT];		\
-	k_termio.c_cc[_VERASE] = k_termios->c_cc[VERASE];		\
-	k_termio.c_cc[_VKILL]  = k_termios->c_cc[VKILL];		\
-	k_termio.c_cc[_VEOF]   = k_termios->c_cc[canon ? VEOF : VMIN];	\
-	k_termio.c_cc[_VEOL]   = k_termios->c_cc[canon ? VEOL : VTIME];	\
-	k_termio.c_cc[_VEOL2]  = k_termios->c_cc[VEOL2];		\
-	k_termio.c_cc[_VSWTC]  = k_termios->c_cc[VSWTC];		\
-									\
-	copy_to_user(u_termio, &k_termio, sizeof(k_termio));		\
-})
-
-#define user_termios_to_kernel_termios(k, u) \
-	copy_from_user(k, u, sizeof(struct termios2))
-
-#define kernel_termios_to_user_termios(u, k) \
-	copy_to_user(u, k, sizeof(struct termios2))
-
-#define user_termios_to_kernel_termios_1(k, u) \
-	copy_from_user(k, u, sizeof(struct termios))
-
-#define kernel_termios_to_user_termios_1(u, k) \
-	copy_to_user(u, k, sizeof(struct termios))
-
-#endif	/* _ALPHA_TERMIOS_H */
diff --git a/arch/alpha/include/asm/thread_info.h b/arch/alpha/include/asm/thread_info.h
index 2592356e3215..4a4d00b37986 100644
--- a/arch/alpha/include/asm/thread_info.h
+++ b/arch/alpha/include/asm/thread_info.h
@@ -19,7 +19,6 @@ struct thread_info {
 	unsigned int		flags;		/* low level flags */
 	unsigned int		ieee_state;	/* see fpu.h */
 
-	mm_segment_t		addr_limit;	/* thread address space */
 	unsigned		cpu;		/* current CPU */
 	int			preempt_count; /* 0 => preemptable, <0 => BUG */
 	unsigned int		status;		/* thread-synchronous flags */
@@ -27,6 +26,7 @@ struct thread_info {
 	int bpt_nsaved;
 	unsigned long bpt_addr[2];		/* breakpoint handling  */
 	unsigned int bpt_insn[2];
+	unsigned long fp[32];
 };
 
 /*
@@ -35,7 +35,6 @@ struct thread_info {
 #define INIT_THREAD_INFO(tsk)			\
 {						\
 	.task		= &tsk,			\
-	.addr_limit	= KERNEL_DS,		\
 	.preempt_count	= INIT_PREEMPT_COUNT,	\
 }
 
@@ -43,6 +42,8 @@ struct thread_info {
 register struct thread_info *__current_thread_info __asm__("$8");
 #define current_thread_info()  __current_thread_info
 
+register unsigned long *current_stack_pointer __asm__ ("$30");
+
 #endif /* __ASSEMBLY__ */
 
 /* Thread information allocation.  */
@@ -77,16 +78,15 @@ register struct thread_info *__current_thread_info __asm__("$8");
 
 /* Work to do on interrupt/exception return.  */
 #define _TIF_WORK_MASK		(_TIF_SIGPENDING | _TIF_NEED_RESCHED | \
-				 _TIF_NOTIFY_RESUME)
-
-/* Work to do on any return to userspace.  */
-#define _TIF_ALLWORK_MASK	(_TIF_WORK_MASK		\
-				 | _TIF_SYSCALL_TRACE)
+				 _TIF_NOTIFY_RESUME | _TIF_NOTIFY_SIGNAL)
 
 #define TS_UAC_NOPRINT		0x0001	/* ! Preserve the following three */
 #define TS_UAC_NOFIX		0x0002	/* ! flags as they match          */
 #define TS_UAC_SIGBUS		0x0004	/* ! userspace part of 'osf_sysinfo' */
 
+#define TS_SAVED_FP		0x0008
+#define TS_RESTORE_FP		0x0010
+
 #define SET_UNALIGN_CTL(task,value)	({				\
 	__u32 status = task_thread_info(task)->status & ~UAC_BITMASK;	\
 	if (value & PR_UNALIGN_NOPRINT)					\
@@ -110,5 +110,17 @@ register struct thread_info *__current_thread_info __asm__("$8");
 	put_user(res, (int __user *)(value));				\
 	})
 
+#ifndef __ASSEMBLY__
+extern void __save_fpu(void);
+
+static inline void save_fpu(void)
+{
+	if (!(current_thread_info()->status & TS_SAVED_FP)) {
+		current_thread_info()->status |= TS_SAVED_FP;
+		__save_fpu();
+	}
+}
+#endif
+
 #endif /* __KERNEL__ */
 #endif /* _ALPHA_THREAD_INFO_H */
diff --git a/arch/alpha/include/asm/timex.h b/arch/alpha/include/asm/timex.h
index b565cc6f408e..f89798da8a14 100644
--- a/arch/alpha/include/asm/timex.h
+++ b/arch/alpha/include/asm/timex.h
@@ -28,5 +28,6 @@ static inline cycles_t get_cycles (void)
 	__asm__ __volatile__ ("rpcc %0" : "=r"(ret));
 	return ret;
 }
+#define get_cycles get_cycles
 
 #endif
diff --git a/arch/alpha/include/asm/tlbflush.h b/arch/alpha/include/asm/tlbflush.h
index 94dc37cf873a..ba4b359d6c39 100644
--- a/arch/alpha/include/asm/tlbflush.h
+++ b/arch/alpha/include/asm/tlbflush.h
@@ -14,16 +14,6 @@
 extern void __load_new_mm_context(struct mm_struct *);
 
 
-/* Use a few helper functions to hide the ugly broken ASN
-   numbers on early Alphas (ev4 and ev45).  */
-
-__EXTERN_INLINE void
-ev4_flush_tlb_current(struct mm_struct *mm)
-{
-	__load_new_mm_context(mm);
-	tbiap();
-}
-
 __EXTERN_INLINE void
 ev5_flush_tlb_current(struct mm_struct *mm)
 {
@@ -35,19 +25,6 @@ ev5_flush_tlb_current(struct mm_struct *mm)
    specific icache page.  */
 
 __EXTERN_INLINE void
-ev4_flush_tlb_current_page(struct mm_struct * mm,
-			   struct vm_area_struct *vma,
-			   unsigned long addr)
-{
-	int tbi_flag = 2;
-	if (vma->vm_flags & VM_EXEC) {
-		__load_new_mm_context(mm);
-		tbi_flag = 3;
-	}
-	tbi(tbi_flag, addr);
-}
-
-__EXTERN_INLINE void
 ev5_flush_tlb_current_page(struct mm_struct * mm,
 			   struct vm_area_struct *vma,
 			   unsigned long addr)
@@ -59,18 +36,8 @@ ev5_flush_tlb_current_page(struct mm_struct * mm,
 }
 
 
-#ifdef CONFIG_ALPHA_GENERIC
-# define flush_tlb_current		alpha_mv.mv_flush_tlb_current
-# define flush_tlb_current_page		alpha_mv.mv_flush_tlb_current_page
-#else
-# ifdef CONFIG_ALPHA_EV4
-#  define flush_tlb_current		ev4_flush_tlb_current
-#  define flush_tlb_current_page	ev4_flush_tlb_current_page
-# else
-#  define flush_tlb_current		ev5_flush_tlb_current
-#  define flush_tlb_current_page	ev5_flush_tlb_current_page
-# endif
-#endif
+#define flush_tlb_current	ev5_flush_tlb_current
+#define flush_tlb_current_page	ev5_flush_tlb_current_page
 
 #ifdef __MMU_EXTERN_INLINE
 #undef __EXTERN_INLINE
diff --git a/arch/alpha/include/asm/uaccess.h b/arch/alpha/include/asm/uaccess.h
index 1b6f25efa247..ef295cbb797c 100644
--- a/arch/alpha/include/asm/uaccess.h
+++ b/arch/alpha/include/asm/uaccess.h
@@ -2,47 +2,7 @@
 #ifndef __ALPHA_UACCESS_H
 #define __ALPHA_UACCESS_H
 
-/*
- * The fs value determines whether argument validity checking should be
- * performed or not.  If get_fs() == USER_DS, checking is performed, with
- * get_fs() == KERNEL_DS, checking is bypassed.
- *
- * Or at least it did once upon a time.  Nowadays it is a mask that
- * defines which bits of the address space are off limits.  This is a
- * wee bit faster than the above.
- *
- * For historical reasons, these macros are grossly misnamed.
- */
-
-#define KERNEL_DS	((mm_segment_t) { 0UL })
-#define USER_DS		((mm_segment_t) { -0x40000000000UL })
-
-#define get_fs()  (current_thread_info()->addr_limit)
-#define set_fs(x) (current_thread_info()->addr_limit = (x))
-
-#define uaccess_kernel()	(get_fs().seg == KERNEL_DS.seg)
-
-/*
- * Is a address valid? This does a straightforward calculation rather
- * than tests.
- *
- * Address valid if:
- *  - "addr" doesn't have any high-bits set
- *  - AND "size" doesn't have any high-bits set
- *  - AND "addr+size-(size != 0)" doesn't have any high-bits set
- *  - OR we are in kernel mode.
- */
-#define __access_ok(addr, size) ({				\
-	unsigned long __ao_a = (addr), __ao_b = (size);		\
-	unsigned long __ao_end = __ao_a + __ao_b - !!__ao_b;	\
-	(get_fs().seg & (__ao_a | __ao_b | __ao_end)) == 0; })
-
-#define access_ok(addr, size)				\
-({							\
-	__chk_user_ptr(addr);				\
-	__access_ok(((unsigned long)(addr)), (size));	\
-})
-
+#include <asm-generic/access_ok.h>
 /*
  * These are the main single-value transfer routines.  They automatically
  * use the right size if we just have the right pointer type.
@@ -105,7 +65,7 @@ extern void __get_user_unknown(void);
 	long __gu_err = -EFAULT;				\
 	unsigned long __gu_val = 0;				\
 	const __typeof__(*(ptr)) __user *__gu_addr = (ptr);	\
-	if (__access_ok((unsigned long)__gu_addr, size)) {	\
+	if (__access_ok(__gu_addr, size)) {			\
 		__gu_err = 0;					\
 		switch (size) {					\
 		  case 1: __get_user_8(__gu_addr); break;	\
@@ -136,9 +96,6 @@ struct __large_struct { unsigned long buf[100]; };
 		: "=r"(__gu_val), "=r"(__gu_err)	\
 		: "m"(__m(addr)), "1"(__gu_err))
 
-#ifdef __alpha_bwx__
-/* Those lucky bastards with ev56 and later CPUs can do byte/word moves.  */
-
 #define __get_user_16(addr)				\
 	__asm__("1: ldwu %0,%2\n"			\
 	"2:\n"						\
@@ -152,33 +109,6 @@ struct __large_struct { unsigned long buf[100]; };
 	EXC(1b,2b,%0,%1)				\
 		: "=r"(__gu_val), "=r"(__gu_err)	\
 		: "m"(__m(addr)), "1"(__gu_err))
-#else
-/* Unfortunately, we can't get an unaligned access trap for the sub-word
-   load, so we have to do a general unaligned operation.  */
-
-#define __get_user_16(addr)						\
-{									\
-	long __gu_tmp;							\
-	__asm__("1: ldq_u %0,0(%3)\n"					\
-	"2:	ldq_u %1,1(%3)\n"					\
-	"	extwl %0,%3,%0\n"					\
-	"	extwh %1,%3,%1\n"					\
-	"	or %0,%1,%0\n"						\
-	"3:\n"								\
-	EXC(1b,3b,%0,%2)						\
-	EXC(2b,3b,%0,%2)						\
-		: "=&r"(__gu_val), "=&r"(__gu_tmp), "=r"(__gu_err)	\
-		: "r"(addr), "2"(__gu_err));				\
-}
-
-#define __get_user_8(addr)						\
-	__asm__("1: ldq_u %0,0(%2)\n"					\
-	"	extbl %0,%2,%0\n"					\
-	"2:\n"								\
-	EXC(1b,2b,%0,%1)						\
-		: "=&r"(__gu_val), "=r"(__gu_err)			\
-		: "r"(addr), "1"(__gu_err))
-#endif
 
 extern void __put_user_unknown(void);
 
@@ -200,7 +130,7 @@ extern void __put_user_unknown(void);
 ({								\
 	long __pu_err = -EFAULT;				\
 	__typeof__(*(ptr)) __user *__pu_addr = (ptr);		\
-	if (__access_ok((unsigned long)__pu_addr, size)) {	\
+	if (__access_ok(__pu_addr, size)) {			\
 		__pu_err = 0;					\
 		switch (size) {					\
 		  case 1: __put_user_8(x, __pu_addr); break;	\
@@ -232,9 +162,6 @@ __asm__ __volatile__("1: stl %r2,%1\n"				\
 		: "=r"(__pu_err)				\
 		: "m"(__m(addr)), "rJ"(x), "0"(__pu_err))
 
-#ifdef __alpha_bwx__
-/* Those lucky bastards with ev56 and later CPUs can do byte/word moves.  */
-
 #define __put_user_16(x, addr)					\
 __asm__ __volatile__("1: stw %r2,%1\n"				\
 	"2:\n"							\
@@ -248,53 +175,6 @@ __asm__ __volatile__("1: stb %r2,%1\n"				\
 	EXC(1b,2b,$31,%0)					\
 		: "=r"(__pu_err)				\
 		: "m"(__m(addr)), "rJ"(x), "0"(__pu_err))
-#else
-/* Unfortunately, we can't get an unaligned access trap for the sub-word
-   write, so we have to do a general unaligned operation.  */
-
-#define __put_user_16(x, addr)					\
-{								\
-	long __pu_tmp1, __pu_tmp2, __pu_tmp3, __pu_tmp4;	\
-	__asm__ __volatile__(					\
-	"1:	ldq_u %2,1(%5)\n"				\
-	"2:	ldq_u %1,0(%5)\n"				\
-	"	inswh %6,%5,%4\n"				\
-	"	inswl %6,%5,%3\n"				\
-	"	mskwh %2,%5,%2\n"				\
-	"	mskwl %1,%5,%1\n"				\
-	"	or %2,%4,%2\n"					\
-	"	or %1,%3,%1\n"					\
-	"3:	stq_u %2,1(%5)\n"				\
-	"4:	stq_u %1,0(%5)\n"				\
-	"5:\n"							\
-	EXC(1b,5b,$31,%0)					\
-	EXC(2b,5b,$31,%0)					\
-	EXC(3b,5b,$31,%0)					\
-	EXC(4b,5b,$31,%0)					\
-		: "=r"(__pu_err), "=&r"(__pu_tmp1), 		\
-		  "=&r"(__pu_tmp2), "=&r"(__pu_tmp3), 		\
-		  "=&r"(__pu_tmp4)				\
-		: "r"(addr), "r"((unsigned long)(x)), "0"(__pu_err)); \
-}
-
-#define __put_user_8(x, addr)					\
-{								\
-	long __pu_tmp1, __pu_tmp2;				\
-	__asm__ __volatile__(					\
-	"1:	ldq_u %1,0(%4)\n"				\
-	"	insbl %3,%4,%2\n"				\
-	"	mskbl %1,%4,%1\n"				\
-	"	or %1,%2,%1\n"					\
-	"2:	stq_u %1,0(%4)\n"				\
-	"3:\n"							\
-	EXC(1b,3b,$31,%0)					\
-	EXC(2b,3b,$31,%0)					\
-		: "=r"(__pu_err), 				\
-	  	  "=&r"(__pu_tmp1), "=&r"(__pu_tmp2)		\
-		: "r"((unsigned long)(x)), "r"(addr), "0"(__pu_err)); \
-}
-#endif
-
 
 /*
  * Complex access routines
@@ -316,17 +196,14 @@ raw_copy_to_user(void __user *to, const void *from, unsigned long len)
 
 extern long __clear_user(void __user *to, long len);
 
-extern inline long
+static inline long
 clear_user(void __user *to, long len)
 {
-	if (__access_ok((unsigned long)to, len))
+	if (__access_ok(to, len))
 		len = __clear_user(to, len);
 	return len;
 }
 
-#define user_addr_max() \
-        (uaccess_kernel() ? ~0UL : TASK_SIZE)
-
 extern long strncpy_from_user(char *dest, const char __user *src, long count);
 extern __must_check long strnlen_user(const char __user *str, long n);
 
diff --git a/arch/alpha/include/asm/unistd.h b/arch/alpha/include/asm/unistd.h
index 986f5da9b7d8..caabd92ea709 100644
--- a/arch/alpha/include/asm/unistd.h
+++ b/arch/alpha/include/asm/unistd.h
@@ -4,7 +4,7 @@
 
 #include <uapi/asm/unistd.h>
 
-#define NR_SYSCALLS	__NR_syscalls
+#define NR_syscalls	__NR_syscalls
 
 #define __ARCH_WANT_NEW_STAT
 #define __ARCH_WANT_OLD_READDIR
diff --git a/arch/alpha/include/asm/user.h b/arch/alpha/include/asm/user.h
index 3df37492c7b7..c9f525a6aab8 100644
--- a/arch/alpha/include/asm/user.h
+++ b/arch/alpha/include/asm/user.h
@@ -45,10 +45,4 @@ struct user {
 	char		u_comm[32];		/* user command name */
 };
 
-#define NBPG			PAGE_SIZE
-#define UPAGES			1
-#define HOST_TEXT_START_ADDR	(u.start_code)
-#define HOST_DATA_START_ADDR	(u.start_data)
-#define HOST_STACK_END_ADDR	(u.start_stack + u.u_ssize * NBPG)
-
 #endif /* _ALPHA_USER_H */
diff --git a/arch/alpha/include/asm/vga.h b/arch/alpha/include/asm/vga.h
index 4c347a8454c7..919931cb5b63 100644
--- a/arch/alpha/include/asm/vga.h
+++ b/arch/alpha/include/asm/vga.h
@@ -13,6 +13,7 @@
 #define VT_BUF_HAVE_RW
 #define VT_BUF_HAVE_MEMSETW
 #define VT_BUF_HAVE_MEMCPYW
+#define VT_BUF_HAVE_MEMMOVEW
 
 static inline void scr_writew(u16 val, volatile u16 *addr)
 {
@@ -40,6 +41,7 @@ static inline void scr_memsetw(u16 *s, u16 c, unsigned int count)
 
 /* Do not trust that the usage will be correct; analyze the arguments.  */
 extern void scr_memcpyw(u16 *d, const u16 *s, unsigned int count);
+extern void scr_memmovew(u16 *d, const u16 *s, unsigned int count);
 
 /* ??? These are currently only used for downloading character sets.  As
    such, they don't need memory barriers.  Is this all they are intended
diff --git a/arch/alpha/include/asm/xchg.h b/arch/alpha/include/asm/xchg.h
deleted file mode 100644
index 7adb80c6746a..000000000000
--- a/arch/alpha/include/asm/xchg.h
+++ /dev/null
@@ -1,246 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ALPHA_CMPXCHG_H
-#error Do not include xchg.h directly!
-#else
-/*
- * xchg/xchg_local and cmpxchg/cmpxchg_local share the same code
- * except that local version do not have the expensive memory barrier.
- * So this file is included twice from asm/cmpxchg.h.
- */
-
-/*
- * Atomic exchange.
- * Since it can be used to implement critical sections
- * it must clobber "memory" (also for interrupts in UP).
- */
-
-static inline unsigned long
-____xchg(_u8, volatile char *m, unsigned long val)
-{
-	unsigned long ret, tmp, addr64;
-
-	__asm__ __volatile__(
-	"	andnot	%4,7,%3\n"
-	"	insbl	%1,%4,%1\n"
-	"1:	ldq_l	%2,0(%3)\n"
-	"	extbl	%2,%4,%0\n"
-	"	mskbl	%2,%4,%2\n"
-	"	or	%1,%2,%2\n"
-	"	stq_c	%2,0(%3)\n"
-	"	beq	%2,2f\n"
-	".subsection 2\n"
-	"2:	br	1b\n"
-	".previous"
-	: "=&r" (ret), "=&r" (val), "=&r" (tmp), "=&r" (addr64)
-	: "r" ((long)m), "1" (val) : "memory");
-
-	return ret;
-}
-
-static inline unsigned long
-____xchg(_u16, volatile short *m, unsigned long val)
-{
-	unsigned long ret, tmp, addr64;
-
-	__asm__ __volatile__(
-	"	andnot	%4,7,%3\n"
-	"	inswl	%1,%4,%1\n"
-	"1:	ldq_l	%2,0(%3)\n"
-	"	extwl	%2,%4,%0\n"
-	"	mskwl	%2,%4,%2\n"
-	"	or	%1,%2,%2\n"
-	"	stq_c	%2,0(%3)\n"
-	"	beq	%2,2f\n"
-	".subsection 2\n"
-	"2:	br	1b\n"
-	".previous"
-	: "=&r" (ret), "=&r" (val), "=&r" (tmp), "=&r" (addr64)
-	: "r" ((long)m), "1" (val) : "memory");
-
-	return ret;
-}
-
-static inline unsigned long
-____xchg(_u32, volatile int *m, unsigned long val)
-{
-	unsigned long dummy;
-
-	__asm__ __volatile__(
-	"1:	ldl_l %0,%4\n"
-	"	bis $31,%3,%1\n"
-	"	stl_c %1,%2\n"
-	"	beq %1,2f\n"
-	".subsection 2\n"
-	"2:	br 1b\n"
-	".previous"
-	: "=&r" (val), "=&r" (dummy), "=m" (*m)
-	: "rI" (val), "m" (*m) : "memory");
-
-	return val;
-}
-
-static inline unsigned long
-____xchg(_u64, volatile long *m, unsigned long val)
-{
-	unsigned long dummy;
-
-	__asm__ __volatile__(
-	"1:	ldq_l %0,%4\n"
-	"	bis $31,%3,%1\n"
-	"	stq_c %1,%2\n"
-	"	beq %1,2f\n"
-	".subsection 2\n"
-	"2:	br 1b\n"
-	".previous"
-	: "=&r" (val), "=&r" (dummy), "=m" (*m)
-	: "rI" (val), "m" (*m) : "memory");
-
-	return val;
-}
-
-/* This function doesn't exist, so you'll get a linker error
-   if something tries to do an invalid xchg().  */
-extern void __xchg_called_with_bad_pointer(void);
-
-static __always_inline unsigned long
-____xchg(, volatile void *ptr, unsigned long x, int size)
-{
-	switch (size) {
-		case 1:
-			return ____xchg(_u8, ptr, x);
-		case 2:
-			return ____xchg(_u16, ptr, x);
-		case 4:
-			return ____xchg(_u32, ptr, x);
-		case 8:
-			return ____xchg(_u64, ptr, x);
-	}
-	__xchg_called_with_bad_pointer();
-	return x;
-}
-
-/*
- * Atomic compare and exchange.  Compare OLD with MEM, if identical,
- * store NEW in MEM.  Return the initial value in MEM.  Success is
- * indicated by comparing RETURN with OLD.
- */
-
-static inline unsigned long
-____cmpxchg(_u8, volatile char *m, unsigned char old, unsigned char new)
-{
-	unsigned long prev, tmp, cmp, addr64;
-
-	__asm__ __volatile__(
-	"	andnot	%5,7,%4\n"
-	"	insbl	%1,%5,%1\n"
-	"1:	ldq_l	%2,0(%4)\n"
-	"	extbl	%2,%5,%0\n"
-	"	cmpeq	%0,%6,%3\n"
-	"	beq	%3,2f\n"
-	"	mskbl	%2,%5,%2\n"
-	"	or	%1,%2,%2\n"
-	"	stq_c	%2,0(%4)\n"
-	"	beq	%2,3f\n"
-	"2:\n"
-	".subsection 2\n"
-	"3:	br	1b\n"
-	".previous"
-	: "=&r" (prev), "=&r" (new), "=&r" (tmp), "=&r" (cmp), "=&r" (addr64)
-	: "r" ((long)m), "Ir" (old), "1" (new) : "memory");
-
-	return prev;
-}
-
-static inline unsigned long
-____cmpxchg(_u16, volatile short *m, unsigned short old, unsigned short new)
-{
-	unsigned long prev, tmp, cmp, addr64;
-
-	__asm__ __volatile__(
-	"	andnot	%5,7,%4\n"
-	"	inswl	%1,%5,%1\n"
-	"1:	ldq_l	%2,0(%4)\n"
-	"	extwl	%2,%5,%0\n"
-	"	cmpeq	%0,%6,%3\n"
-	"	beq	%3,2f\n"
-	"	mskwl	%2,%5,%2\n"
-	"	or	%1,%2,%2\n"
-	"	stq_c	%2,0(%4)\n"
-	"	beq	%2,3f\n"
-	"2:\n"
-	".subsection 2\n"
-	"3:	br	1b\n"
-	".previous"
-	: "=&r" (prev), "=&r" (new), "=&r" (tmp), "=&r" (cmp), "=&r" (addr64)
-	: "r" ((long)m), "Ir" (old), "1" (new) : "memory");
-
-	return prev;
-}
-
-static inline unsigned long
-____cmpxchg(_u32, volatile int *m, int old, int new)
-{
-	unsigned long prev, cmp;
-
-	__asm__ __volatile__(
-	"1:	ldl_l %0,%5\n"
-	"	cmpeq %0,%3,%1\n"
-	"	beq %1,2f\n"
-	"	mov %4,%1\n"
-	"	stl_c %1,%2\n"
-	"	beq %1,3f\n"
-	"2:\n"
-	".subsection 2\n"
-	"3:	br 1b\n"
-	".previous"
-	: "=&r"(prev), "=&r"(cmp), "=m"(*m)
-	: "r"((long) old), "r"(new), "m"(*m) : "memory");
-
-	return prev;
-}
-
-static inline unsigned long
-____cmpxchg(_u64, volatile long *m, unsigned long old, unsigned long new)
-{
-	unsigned long prev, cmp;
-
-	__asm__ __volatile__(
-	"1:	ldq_l %0,%5\n"
-	"	cmpeq %0,%3,%1\n"
-	"	beq %1,2f\n"
-	"	mov %4,%1\n"
-	"	stq_c %1,%2\n"
-	"	beq %1,3f\n"
-	"2:\n"
-	".subsection 2\n"
-	"3:	br 1b\n"
-	".previous"
-	: "=&r"(prev), "=&r"(cmp), "=m"(*m)
-	: "r"((long) old), "r"(new), "m"(*m) : "memory");
-
-	return prev;
-}
-
-/* This function doesn't exist, so you'll get a linker error
-   if something tries to do an invalid cmpxchg().  */
-extern void __cmpxchg_called_with_bad_pointer(void);
-
-static __always_inline unsigned long
-____cmpxchg(, volatile void *ptr, unsigned long old, unsigned long new,
-	      int size)
-{
-	switch (size) {
-		case 1:
-			return ____cmpxchg(_u8, ptr, old, new);
-		case 2:
-			return ____cmpxchg(_u16, ptr, old, new);
-		case 4:
-			return ____cmpxchg(_u32, ptr, old, new);
-		case 8:
-			return ____cmpxchg(_u64, ptr, old, new);
-	}
-	__cmpxchg_called_with_bad_pointer();
-	return old;
-}
-
-#endif
diff --git a/arch/alpha/include/asm/xor.h b/arch/alpha/include/asm/xor.h
index 5aeb4fb3cb7c..e0de0c233ab9 100644
--- a/arch/alpha/include/asm/xor.h
+++ b/arch/alpha/include/asm/xor.h
@@ -5,24 +5,43 @@
  * Optimized RAID-5 checksumming functions for alpha EV5 and EV6
  */
 
-extern void xor_alpha_2(unsigned long, unsigned long *, unsigned long *);
-extern void xor_alpha_3(unsigned long, unsigned long *, unsigned long *,
-		        unsigned long *);
-extern void xor_alpha_4(unsigned long, unsigned long *, unsigned long *,
-		        unsigned long *, unsigned long *);
-extern void xor_alpha_5(unsigned long, unsigned long *, unsigned long *,
-		        unsigned long *, unsigned long *, unsigned long *);
+extern void
+xor_alpha_2(unsigned long bytes, unsigned long * __restrict p1,
+	    const unsigned long * __restrict p2);
+extern void
+xor_alpha_3(unsigned long bytes, unsigned long * __restrict p1,
+	    const unsigned long * __restrict p2,
+	    const unsigned long * __restrict p3);
+extern void
+xor_alpha_4(unsigned long bytes, unsigned long * __restrict p1,
+	    const unsigned long * __restrict p2,
+	    const unsigned long * __restrict p3,
+	    const unsigned long * __restrict p4);
+extern void
+xor_alpha_5(unsigned long bytes, unsigned long * __restrict p1,
+	    const unsigned long * __restrict p2,
+	    const unsigned long * __restrict p3,
+	    const unsigned long * __restrict p4,
+	    const unsigned long * __restrict p5);
 
-extern void xor_alpha_prefetch_2(unsigned long, unsigned long *,
-				 unsigned long *);
-extern void xor_alpha_prefetch_3(unsigned long, unsigned long *,
-				 unsigned long *, unsigned long *);
-extern void xor_alpha_prefetch_4(unsigned long, unsigned long *,
-				 unsigned long *, unsigned long *,
-				 unsigned long *);
-extern void xor_alpha_prefetch_5(unsigned long, unsigned long *,
-				 unsigned long *, unsigned long *,
-				 unsigned long *, unsigned long *);
+extern void
+xor_alpha_prefetch_2(unsigned long bytes, unsigned long * __restrict p1,
+		     const unsigned long * __restrict p2);
+extern void
+xor_alpha_prefetch_3(unsigned long bytes, unsigned long * __restrict p1,
+		     const unsigned long * __restrict p2,
+		     const unsigned long * __restrict p3);
+extern void
+xor_alpha_prefetch_4(unsigned long bytes, unsigned long * __restrict p1,
+		     const unsigned long * __restrict p2,
+		     const unsigned long * __restrict p3,
+		     const unsigned long * __restrict p4);
+extern void
+xor_alpha_prefetch_5(unsigned long bytes, unsigned long * __restrict p1,
+		     const unsigned long * __restrict p2,
+		     const unsigned long * __restrict p3,
+		     const unsigned long * __restrict p4,
+		     const unsigned long * __restrict p5);
 
 asm("								\n\
 	.text							\n\
diff --git a/arch/alpha/include/uapi/asm/compiler.h b/arch/alpha/include/uapi/asm/compiler.h
index 0e00c0e13374..8c03740966b4 100644
--- a/arch/alpha/include/uapi/asm/compiler.h
+++ b/arch/alpha/include/uapi/asm/compiler.h
@@ -95,24 +95,6 @@
 #define __kernel_ldwu(mem)	(mem)
 #define __kernel_stb(val,mem)	((mem) = (val))
 #define __kernel_stw(val,mem)	((mem) = (val))
-#else
-#define __kernel_ldbu(mem)				\
-  ({ unsigned char __kir;				\
-     __asm__(".arch ev56;				\
-	      ldbu %0,%1" : "=r"(__kir) : "m"(mem));	\
-     __kir; })
-#define __kernel_ldwu(mem)				\
-  ({ unsigned short __kir;				\
-     __asm__(".arch ev56;				\
-	      ldwu %0,%1" : "=r"(__kir) : "m"(mem));	\
-     __kir; })
-#define __kernel_stb(val,mem)				\
-  __asm__(".arch ev56;					\
-	   stb %1,%0" : "=m"(mem) : "r"(val))
-#define __kernel_stw(val,mem)				\
-  __asm__(".arch ev56;					\
-	   stw %1,%0" : "=m"(mem) : "r"(val))
 #endif
 
-
 #endif /* _UAPI__ALPHA_COMPILER_H */
diff --git a/arch/alpha/include/uapi/asm/mman.h b/arch/alpha/include/uapi/asm/mman.h
index 56b4ee5a6c9e..1e700468a685 100644
--- a/arch/alpha/include/uapi/asm/mman.h
+++ b/arch/alpha/include/uapi/asm/mman.h
@@ -74,6 +74,13 @@
 #define MADV_POPULATE_READ	22	/* populate (prefault) page tables readable */
 #define MADV_POPULATE_WRITE	23	/* populate (prefault) page tables writable */
 
+#define MADV_DONTNEED_LOCKED	24	/* like DONTNEED, but drop locked pages too */
+
+#define MADV_COLLAPSE	25		/* Synchronous hugepage collapse */
+
+#define MADV_GUARD_INSTALL 102		/* fatal signal on access to range */
+#define MADV_GUARD_REMOVE 103		/* unguard range */
+
 /* compatibility flags */
 #define MAP_FILE	0
 
diff --git a/arch/alpha/include/uapi/asm/param.h b/arch/alpha/include/uapi/asm/param.h
index 49c7119934e2..e4e410f9bf85 100644
--- a/arch/alpha/include/uapi/asm/param.h
+++ b/arch/alpha/include/uapi/asm/param.h
@@ -2,14 +2,9 @@
 #ifndef _UAPI_ASM_ALPHA_PARAM_H
 #define _UAPI_ASM_ALPHA_PARAM_H
 
-#define HZ		1024
-
+#define __USER_HZ	1024
 #define EXEC_PAGESIZE	8192
 
-#ifndef NOGROUP
-#define NOGROUP		(-1)
-#endif
-
-#define MAXHOSTNAMELEN	64	/* max length of hostname */
+#include <asm-generic/param.h>
 
 #endif /* _UAPI_ASM_ALPHA_PARAM_H */
diff --git a/arch/alpha/include/uapi/asm/ptrace.h b/arch/alpha/include/uapi/asm/ptrace.h
index c29194181025..72ed913a910f 100644
--- a/arch/alpha/include/uapi/asm/ptrace.h
+++ b/arch/alpha/include/uapi/asm/ptrace.h
@@ -42,6 +42,8 @@ struct pt_regs {
 	unsigned long trap_a0;
 	unsigned long trap_a1;
 	unsigned long trap_a2;
+/* This makes the stack 16-byte aligned as GCC expects */
+	unsigned long __pad0;
 /* These are saved by PAL-code: */
 	unsigned long ps;
 	unsigned long pc;
@@ -64,7 +66,9 @@ struct switch_stack {
 	unsigned long r14;
 	unsigned long r15;
 	unsigned long r26;
+#ifndef __KERNEL__
 	unsigned long fp[32];	/* fp[31] is fpcr */
+#endif
 };
 
 
diff --git a/arch/alpha/include/uapi/asm/signal.h b/arch/alpha/include/uapi/asm/signal.h
index a69dd8d080a8..1413075f7616 100644
--- a/arch/alpha/include/uapi/asm/signal.h
+++ b/arch/alpha/include/uapi/asm/signal.h
@@ -100,7 +100,7 @@ struct sigaction {
 typedef struct sigaltstack {
 	void __user *ss_sp;
 	int ss_flags;
-	size_t ss_size;
+	__kernel_size_t ss_size;
 } stack_t;
 
 /* sigstack(2) is deprecated, and will be withdrawn in a future version
diff --git a/arch/alpha/include/uapi/asm/socket.h b/arch/alpha/include/uapi/asm/socket.h
index 1dd9baf4a6c2..5ef57f88df6b 100644
--- a/arch/alpha/include/uapi/asm/socket.h
+++ b/arch/alpha/include/uapi/asm/socket.h
@@ -131,6 +131,30 @@
 
 #define SO_BUF_LOCK		72
 
+#define SO_RESERVE_MEM		73
+
+#define SO_TXREHASH		74
+
+#define SO_RCVMARK		75
+
+#define SO_PASSPIDFD		76
+#define SO_PEERPIDFD		77
+
+#define SO_DEVMEM_LINEAR	78
+#define SCM_DEVMEM_LINEAR	SO_DEVMEM_LINEAR
+#define SO_DEVMEM_DMABUF	79
+#define SCM_DEVMEM_DMABUF	SO_DEVMEM_DMABUF
+#define SO_DEVMEM_DONTNEED	80
+
+#define SCM_TS_OPT_ID		81
+
+#define SO_RCVPRIORITY		82
+
+#define SO_PASSRIGHTS		83
+
+#define SO_INQ			84
+#define SCM_INQ			SO_INQ
+
 #if !defined(__KERNEL__)
 
 #if __BITS_PER_LONG == 64
diff --git a/arch/alpha/include/uapi/asm/termbits.h b/arch/alpha/include/uapi/asm/termbits.h
index 4575ba34a0ea..f1290b22072b 100644
--- a/arch/alpha/include/uapi/asm/termbits.h
+++ b/arch/alpha/include/uapi/asm/termbits.h
@@ -2,10 +2,8 @@
 #ifndef _ALPHA_TERMBITS_H
 #define _ALPHA_TERMBITS_H
 
-#include <linux/posix_types.h>
+#include <asm-generic/termbits-common.h>
 
-typedef unsigned char	cc_t;
-typedef unsigned int	speed_t;
 typedef unsigned int	tcflag_t;
 
 /*
@@ -53,76 +51,58 @@ struct ktermios {
 };
 
 /* c_cc characters */
-#define VEOF 0
-#define VEOL 1
-#define VEOL2 2
-#define VERASE 3
-#define VWERASE 4
-#define VKILL 5
-#define VREPRINT 6
-#define VSWTC 7
-#define VINTR 8
-#define VQUIT 9
-#define VSUSP 10
-#define VSTART 12
-#define VSTOP 13
-#define VLNEXT 14
-#define VDISCARD 15
-#define VMIN 16
-#define VTIME 17
+#define VEOF		 0
+#define VEOL		 1
+#define VEOL2		 2
+#define VERASE		 3
+#define VWERASE		 4
+#define VKILL		 5
+#define VREPRINT	 6
+#define VSWTC		 7
+#define VINTR		 8
+#define VQUIT		 9
+#define VSUSP		10
+#define VSTART		12
+#define VSTOP		13
+#define VLNEXT		14
+#define VDISCARD	15
+#define VMIN		16
+#define VTIME		17
 
 /* c_iflag bits */
-#define IGNBRK	0000001
-#define BRKINT	0000002
-#define IGNPAR	0000004
-#define PARMRK	0000010
-#define INPCK	0000020
-#define ISTRIP	0000040
-#define INLCR	0000100
-#define IGNCR	0000200
-#define ICRNL	0000400
-#define IXON	0001000
-#define IXOFF	0002000
-#define IXANY	0004000
-#define IUCLC	0010000
-#define IMAXBEL	0020000
-#define IUTF8	0040000
+#define IXON	0x0200
+#define IXOFF	0x0400
+#define IUCLC	0x1000
+#define IMAXBEL	0x2000
+#define IUTF8	0x4000
 
 /* c_oflag bits */
-#define OPOST	0000001
-#define ONLCR	0000002
-#define OLCUC	0000004
-
-#define OCRNL	0000010
-#define ONOCR	0000020
-#define ONLRET	0000040
-
-#define OFILL	00000100
-#define OFDEL	00000200
-#define NLDLY	00001400
-#define   NL0	00000000
-#define   NL1	00000400
-#define   NL2	00001000
-#define   NL3	00001400
-#define TABDLY	00006000
-#define   TAB0	00000000
-#define   TAB1	00002000
-#define   TAB2	00004000
-#define   TAB3	00006000
-#define CRDLY	00030000
-#define   CR0	00000000
-#define   CR1	00010000
-#define   CR2	00020000
-#define   CR3	00030000
-#define FFDLY	00040000
-#define   FF0	00000000
-#define   FF1	00040000
-#define BSDLY	00100000
-#define   BS0	00000000
-#define   BS1	00100000
-#define VTDLY	00200000
-#define   VT0	00000000
-#define   VT1	00200000
+#define ONLCR	0x00002
+#define OLCUC	0x00004
+#define NLDLY	0x00300
+#define   NL0	0x00000
+#define   NL1	0x00100
+#define   NL2	0x00200
+#define   NL3	0x00300
+#define TABDLY	0x00c00
+#define   TAB0	0x00000
+#define   TAB1	0x00400
+#define   TAB2	0x00800
+#define   TAB3	0x00c00
+#define CRDLY	0x03000
+#define   CR0	0x00000
+#define   CR1	0x01000
+#define   CR2	0x02000
+#define   CR3	0x03000
+#define FFDLY	0x04000
+#define   FF0	0x00000
+#define   FF1	0x04000
+#define BSDLY	0x08000
+#define   BS0	0x00000
+#define   BS1	0x08000
+#define VTDLY	0x10000
+#define   VT0	0x00000
+#define   VT1	0x10000
 /*
  * Should be equivalent to TAB3, see description of TAB3 in
  * POSIX.1-2008, Ch. 11.2.3 "Output Modes"
@@ -130,61 +110,36 @@ struct ktermios {
 #define XTABS	TAB3
 
 /* c_cflag bit meaning */
-#define CBAUD	0000037
-#define  B0	0000000		/* hang up */
-#define  B50	0000001
-#define  B75	0000002
-#define  B110	0000003
-#define  B134	0000004
-#define  B150	0000005
-#define  B200	0000006
-#define  B300	0000007
-#define  B600	0000010
-#define  B1200	0000011
-#define  B1800	0000012
-#define  B2400	0000013
-#define  B4800	0000014
-#define  B9600	0000015
-#define  B19200	0000016
-#define  B38400	0000017
-#define EXTA B19200
-#define EXTB B38400
-#define CBAUDEX 0000000
-#define  B57600   00020
-#define  B115200  00021
-#define  B230400  00022
-#define  B460800  00023
-#define  B500000  00024
-#define  B576000  00025
-#define  B921600  00026
-#define B1000000  00027
-#define B1152000  00030
-#define B1500000  00031
-#define B2000000  00032
-#define B2500000  00033
-#define B3000000  00034
-#define B3500000  00035
-#define B4000000  00036
-#define BOTHER    00037
-
-#define CSIZE	00001400
-#define   CS5	00000000
-#define   CS6	00000400
-#define   CS7	00001000
-#define   CS8	00001400
-
-#define CSTOPB	00002000
-#define CREAD	00004000
-#define PARENB	00010000
-#define PARODD	00020000
-#define HUPCL	00040000
-
-#define CLOCAL	00100000
-#define CMSPAR	  010000000000		/* mark or space (stick) parity */
-#define CRTSCTS	  020000000000		/* flow control */
-
-#define CIBAUD	07600000
-#define IBSHIFT	16
+#define CBAUD		0x0000001f
+#define CBAUDEX		0x00000000
+#define BOTHER		0x0000001f
+#define     B57600	0x00000010
+#define    B115200	0x00000011
+#define    B230400	0x00000012
+#define    B460800	0x00000013
+#define    B500000	0x00000014
+#define    B576000	0x00000015
+#define    B921600	0x00000016
+#define   B1000000	0x00000017
+#define   B1152000	0x00000018
+#define   B1500000	0x00000019
+#define   B2000000	0x0000001a
+#define   B2500000	0x0000001b
+#define   B3000000	0x0000001c
+#define   B3500000	0x0000001d
+#define   B4000000	0x0000001e
+#define CSIZE		0x00000300
+#define   CS5		0x00000000
+#define   CS6		0x00000100
+#define   CS7		0x00000200
+#define   CS8		0x00000300
+#define CSTOPB		0x00000400
+#define CREAD		0x00000800
+#define PARENB		0x00001000
+#define PARODD		0x00002000
+#define HUPCL		0x00004000
+#define CLOCAL		0x00008000
+#define CIBAUD		0x001f0000
 
 /* c_lflag bits */
 #define ISIG	0x00000080
@@ -204,17 +159,6 @@ struct ktermios {
 #define IEXTEN	0x00000400
 #define EXTPROC	0x10000000
 
-/* Values for the ACTION argument to `tcflow'.  */
-#define	TCOOFF		0
-#define	TCOON		1
-#define	TCIOFF		2
-#define	TCION		3
-
-/* Values for the QUEUE_SELECTOR argument to `tcflush'.  */
-#define	TCIFLUSH	0
-#define	TCOFLUSH	1
-#define	TCIOFLUSH	2
-
 /* Values for the OPTIONAL_ACTIONS argument to `tcsetattr'.  */
 #define	TCSANOW		0
 #define	TCSADRAIN	1
diff --git a/arch/alpha/kernel/Makefile b/arch/alpha/kernel/Makefile
index 5a74581bf0ee..187cd8df2faf 100644
--- a/arch/alpha/kernel/Makefile
+++ b/arch/alpha/kernel/Makefile
@@ -3,13 +3,13 @@
 # Makefile for the linux kernel.
 #
 
-extra-y		:= head.o vmlinux.lds
+always-$(KBUILD_BUILTIN)	:= vmlinux.lds
 asflags-y	:= $(KBUILD_CFLAGS)
 ccflags-y	:= -Wno-sign-compare
 
-obj-y    := entry.o traps.o process.o osf_sys.o irq.o \
+obj-y    := head.o entry.o traps.o process.o osf_sys.o irq.o \
 	    irq_alpha.o signal.o setup.o ptrace.o time.o \
-	    systbls.o err_common.o io.o bugs.o
+	    systbls.o err_common.o io.o bugs.o termios.o
 
 obj-$(CONFIG_VGA_HOSE)	+= console.o
 obj-$(CONFIG_SMP)	+= smp.o
@@ -22,14 +22,14 @@ obj-$(CONFIG_AUDIT)	+= audit.o
 
 ifdef CONFIG_ALPHA_GENERIC
 
-obj-y 	 += core_apecs.o core_cia.o core_irongate.o core_lca.o \
+obj-y 	 += core_cia.o core_irongate.o \
 	    core_mcpcia.o core_polaris.o core_t2.o \
 	    core_tsunami.o
 
-obj-y	 += sys_alcor.o sys_cabriolet.o sys_dp264.o sys_eb64p.o sys_eiger.o \
-	    sys_jensen.o sys_miata.o sys_mikasa.o sys_nautilus.o \
+obj-y	 += sys_alcor.o sys_cabriolet.o sys_dp264.o sys_eiger.o \
+	    sys_miata.o sys_mikasa.o sys_nautilus.o \
 	    sys_noritake.o sys_rawhide.o sys_ruffian.o sys_rx164.o \
-	    sys_sable.o sys_sio.o sys_sx164.o sys_takara.o
+	    sys_sable.o sys_sx164.o sys_takara.o
 
 ifndef CONFIG_ALPHA_LEGACY_START_ADDRESS
 obj-y	 += core_marvel.o core_titan.o core_wildfire.o
@@ -47,15 +47,9 @@ else
 # Misc support
 obj-$(CONFIG_ALPHA_SRM)		+= srmcons.o
 
-ifdef CONFIG_BINFMT_AOUT
-obj-y	+= binfmt_loader.o
-endif
-
 # Core logic support
-obj-$(CONFIG_ALPHA_APECS)	+= core_apecs.o
 obj-$(CONFIG_ALPHA_CIA)		+= core_cia.o
 obj-$(CONFIG_ALPHA_IRONGATE)	+= core_irongate.o
-obj-$(CONFIG_ALPHA_LCA)		+= core_lca.o
 obj-$(CONFIG_ALPHA_MARVEL)	+= core_marvel.o gct.o
 obj-$(CONFIG_ALPHA_MCPCIA)	+= core_mcpcia.o
 obj-$(CONFIG_ALPHA_POLARIS)	+= core_polaris.o
@@ -66,12 +60,6 @@ obj-$(CONFIG_ALPHA_WILDFIRE)	+= core_wildfire.o
 
 # Board support
 obj-$(CONFIG_ALPHA_ALCOR)	+= sys_alcor.o irq_i8259.o irq_srm.o
-obj-$(CONFIG_ALPHA_CABRIOLET)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
-				   pc873xx.o
-obj-$(CONFIG_ALPHA_EB164)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
-				   pc873xx.o
-obj-$(CONFIG_ALPHA_EB66P)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
-				   pc873xx.o
 obj-$(CONFIG_ALPHA_LX164)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
 				   smc37c93x.o
 obj-$(CONFIG_ALPHA_PC164)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
@@ -79,10 +67,7 @@ obj-$(CONFIG_ALPHA_PC164)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
 obj-$(CONFIG_ALPHA_DP264)	+= sys_dp264.o irq_i8259.o es1888.o smc37c669.o
 obj-$(CONFIG_ALPHA_SHARK)	+= sys_dp264.o irq_i8259.o es1888.o smc37c669.o
 obj-$(CONFIG_ALPHA_TITAN)	+= sys_titan.o irq_i8259.o smc37c669.o
-obj-$(CONFIG_ALPHA_EB64P)	+= sys_eb64p.o irq_i8259.o
-obj-$(CONFIG_ALPHA_EB66)	+= sys_eb64p.o irq_i8259.o
 obj-$(CONFIG_ALPHA_EIGER)	+= sys_eiger.o irq_i8259.o
-obj-$(CONFIG_ALPHA_JENSEN)	+= sys_jensen.o pci-noop.o irq_i8259.o
 obj-$(CONFIG_ALPHA_MARVEL)	+= sys_marvel.o 
 obj-$(CONFIG_ALPHA_MIATA)	+= sys_miata.o irq_pyxis.o irq_i8259.o \
 				   es1888.o smc37c669.o
@@ -93,12 +78,6 @@ obj-$(CONFIG_ALPHA_RAWHIDE)	+= sys_rawhide.o irq_i8259.o
 obj-$(CONFIG_ALPHA_RUFFIAN)	+= sys_ruffian.o irq_pyxis.o irq_i8259.o
 obj-$(CONFIG_ALPHA_RX164)	+= sys_rx164.o irq_i8259.o
 obj-$(CONFIG_ALPHA_SABLE)	+= sys_sable.o
-obj-$(CONFIG_ALPHA_LYNX)	+= sys_sable.o
-obj-$(CONFIG_ALPHA_BOOK1)	+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
-obj-$(CONFIG_ALPHA_AVANTI)	+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
-obj-$(CONFIG_ALPHA_NONAME)	+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
-obj-$(CONFIG_ALPHA_P2K)		+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
-obj-$(CONFIG_ALPHA_XL)		+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
 obj-$(CONFIG_ALPHA_SX164)	+= sys_sx164.o irq_pyxis.o irq_i8259.o \
 				   irq_srm.o smc37c669.o
 obj-$(CONFIG_ALPHA_TAKARA)	+= sys_takara.o irq_i8259.o pc873xx.o
diff --git a/arch/alpha/kernel/asm-offsets.c b/arch/alpha/kernel/asm-offsets.c
index 2e125e5c1508..1ebb05890499 100644
--- a/arch/alpha/kernel/asm-offsets.c
+++ b/arch/alpha/kernel/asm-offsets.c
@@ -4,39 +4,27 @@
  * This code generates raw asm output which is post-processed to extract
  * and format the required data.
  */
+#define COMPILE_OFFSETS
 
 #include <linux/types.h>
 #include <linux/stddef.h>
 #include <linux/sched.h>
 #include <linux/ptrace.h>
 #include <linux/kbuild.h>
-#include <asm/io.h>
+#include <asm/machvec.h>
 
-void foo(void)
+static void __used foo(void)
 {
-	DEFINE(TI_TASK, offsetof(struct thread_info, task));
 	DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
-	DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
+	DEFINE(TI_FP, offsetof(struct thread_info, fp));
+	DEFINE(TI_STATUS, offsetof(struct thread_info, status));
 	BLANK();
 
-        DEFINE(TASK_BLOCKED, offsetof(struct task_struct, blocked));
-        DEFINE(TASK_CRED, offsetof(struct task_struct, cred));
-        DEFINE(TASK_REAL_PARENT, offsetof(struct task_struct, real_parent));
-        DEFINE(TASK_GROUP_LEADER, offsetof(struct task_struct, group_leader));
-        DEFINE(TASK_TGID, offsetof(struct task_struct, tgid));
-        BLANK();
-
-        DEFINE(CRED_UID,  offsetof(struct cred, uid));
-        DEFINE(CRED_EUID, offsetof(struct cred, euid));
-        DEFINE(CRED_GID,  offsetof(struct cred, gid));
-        DEFINE(CRED_EGID, offsetof(struct cred, egid));
-        BLANK();
-
+	DEFINE(SP_OFF, offsetof(struct pt_regs, ps));
 	DEFINE(SIZEOF_PT_REGS, sizeof(struct pt_regs));
-	DEFINE(PT_PTRACED, PT_PTRACED);
-	DEFINE(CLONE_VM, CLONE_VM);
-	DEFINE(CLONE_UNTRACED, CLONE_UNTRACED);
-	DEFINE(SIGCHLD, SIGCHLD);
+	BLANK();
+
+	DEFINE(SWITCH_STACK_SIZE, sizeof(struct switch_stack));
 	BLANK();
 
 	DEFINE(HAE_CACHE, offsetof(struct alpha_machine_vector, hae_cache));
diff --git a/arch/alpha/kernel/audit.c b/arch/alpha/kernel/audit.c
index 96a9d18ff4c4..3ab04709784a 100644
--- a/arch/alpha/kernel/audit.c
+++ b/arch/alpha/kernel/audit.c
@@ -37,13 +37,15 @@ int audit_classify_syscall(int abi, unsigned syscall)
 {
 	switch(syscall) {
 	case __NR_open:
-		return 2;
+		return AUDITSC_OPEN;
 	case __NR_openat:
-		return 3;
+		return AUDITSC_OPENAT;
 	case __NR_execve:
-		return 5;
+		return AUDITSC_EXECVE;
+	case __NR_openat2:
+		return AUDITSC_OPENAT2;
 	default:
-		return 0;
+		return AUDITSC_NATIVE;
 	}
 }
 
diff --git a/arch/alpha/kernel/binfmt_loader.c b/arch/alpha/kernel/binfmt_loader.c
deleted file mode 100644
index e4be7a543ecf..000000000000
--- a/arch/alpha/kernel/binfmt_loader.c
+++ /dev/null
@@ -1,46 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/file.h>
-#include <linux/mm_types.h>
-#include <linux/binfmts.h>
-#include <linux/a.out.h>
-
-static int load_binary(struct linux_binprm *bprm)
-{
-	struct exec *eh = (struct exec *)bprm->buf;
-	unsigned long loader;
-	struct file *file;
-	int retval;
-
-	if (eh->fh.f_magic != 0x183 || (eh->fh.f_flags & 0x3000) != 0x3000)
-		return -ENOEXEC;
-
-	if (bprm->loader)
-		return -ENOEXEC;
-
-	loader = bprm->vma->vm_end - sizeof(void *);
-
-	file = open_exec("/sbin/loader");
-	retval = PTR_ERR(file);
-	if (IS_ERR(file))
-		return retval;
-
-	/* Remember if the application is TASO.  */
-	bprm->taso = eh->ah.entry < 0x100000000UL;
-
-	bprm->interpreter = file;
-	bprm->loader = loader;
-	return 0;
-}
-
-static struct linux_binfmt loader_format = {
-	.load_binary	= load_binary,
-};
-
-static int __init init_loader_binfmt(void)
-{
-	insert_binfmt(&loader_format);
-	return 0;
-}
-arch_initcall(init_loader_binfmt);
diff --git a/arch/alpha/kernel/bugs.c b/arch/alpha/kernel/bugs.c
index 08cc10d7fa17..e8c51089325f 100644
--- a/arch/alpha/kernel/bugs.c
+++ b/arch/alpha/kernel/bugs.c
@@ -1,6 +1,7 @@
 
 #include <asm/hwrpb.h>
 #include <linux/device.h>
+#include <linux/cpu.h>
 
 
 #ifdef CONFIG_SYSFS
diff --git a/arch/alpha/kernel/console.c b/arch/alpha/kernel/console.c
index 5476279329a6..4193f76e9633 100644
--- a/arch/alpha/kernel/console.c
+++ b/arch/alpha/kernel/console.c
@@ -15,6 +15,7 @@
 #include <asm/machvec.h>
 
 #include "pci_impl.h"
+#include "proto.h"
 
 #ifdef CONFIG_VGA_HOSE
 
diff --git a/arch/alpha/kernel/core_apecs.c b/arch/alpha/kernel/core_apecs.c
deleted file mode 100644
index 6df765ff2b10..000000000000
--- a/arch/alpha/kernel/core_apecs.c
+++ /dev/null
@@ -1,420 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- *	linux/arch/alpha/kernel/core_apecs.c
- *
- * Rewritten for Apecs from the lca.c from:
- *
- * Written by David Mosberger (davidm@cs.arizona.edu) with some code
- * taken from Dave Rusling's (david.rusling@reo.mts.dec.com) 32-bit
- * bios code.
- *
- * Code common to all APECS core logic chips.
- */
-
-#define __EXTERN_INLINE inline
-#include <asm/io.h>
-#include <asm/core_apecs.h>
-#undef __EXTERN_INLINE
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-
-#include <asm/ptrace.h>
-#include <asm/smp.h>
-#include <asm/mce.h>
-
-#include "proto.h"
-#include "pci_impl.h"
-
-/*
- * NOTE: Herein lie back-to-back mb instructions.  They are magic. 
- * One plausible explanation is that the i/o controller does not properly
- * handle the system transaction.  Another involves timing.  Ho hum.
- */
-
-/*
- * BIOS32-style PCI interface:
- */
-
-#define DEBUG_CONFIG 0
-
-#if DEBUG_CONFIG
-# define DBGC(args)	printk args
-#else
-# define DBGC(args)
-#endif
-
-#define vuip	volatile unsigned int  *
-
-/*
- * Given a bus, device, and function number, compute resulting
- * configuration space address and setup the APECS_HAXR2 register
- * accordingly.  It is therefore not safe to have concurrent
- * invocations to configuration space access routines, but there
- * really shouldn't be any need for this.
- *
- * Type 0:
- *
- *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
- *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | | | | | | | | | | | | | | | | | | | | | | | |F|F|F|R|R|R|R|R|R|0|0|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- *	31:11	Device select bit.
- * 	10:8	Function number
- * 	 7:2	Register number
- *
- * Type 1:
- *
- *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
- *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- *	31:24	reserved
- *	23:16	bus number (8 bits = 128 possible buses)
- *	15:11	Device number (5 bits)
- *	10:8	function number
- *	 7:2	register number
- *  
- * Notes:
- *	The function number selects which function of a multi-function device 
- *	(e.g., SCSI and Ethernet).
- * 
- *	The register selects a DWORD (32 bit) register offset.  Hence it
- *	doesn't get shifted by 2 bits as we want to "drop" the bottom two
- *	bits.
- */
-
-static int
-mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where,
-	     unsigned long *pci_addr, unsigned char *type1)
-{
-	unsigned long addr;
-	u8 bus = pbus->number;
-
-	DBGC(("mk_conf_addr(bus=%d ,device_fn=0x%x, where=0x%x,"
-	      " pci_addr=0x%p, type1=0x%p)\n",
-	      bus, device_fn, where, pci_addr, type1));
-
-	if (bus == 0) {
-		int device = device_fn >> 3;
-
-		/* type 0 configuration cycle: */
-
-		if (device > 20) {
-			DBGC(("mk_conf_addr: device (%d) > 20, returning -1\n",
-			      device));
-			return -1;
-		}
-
-		*type1 = 0;
-		addr = (device_fn << 8) | (where);
-	} else {
-		/* type 1 configuration cycle: */
-		*type1 = 1;
-		addr = (bus << 16) | (device_fn << 8) | (where);
-	}
-	*pci_addr = addr;
-	DBGC(("mk_conf_addr: returning pci_addr 0x%lx\n", addr));
-	return 0;
-}
-
-static unsigned int
-conf_read(unsigned long addr, unsigned char type1)
-{
-	unsigned long flags;
-	unsigned int stat0, value;
-	unsigned int haxr2 = 0;
-
-	local_irq_save(flags);	/* avoid getting hit by machine check */
-
-	DBGC(("conf_read(addr=0x%lx, type1=%d)\n", addr, type1));
-
-	/* Reset status register to avoid losing errors.  */
-	stat0 = *(vuip)APECS_IOC_DCSR;
-	*(vuip)APECS_IOC_DCSR = stat0;
-	mb();
-	DBGC(("conf_read: APECS DCSR was 0x%x\n", stat0));
-
-	/* If Type1 access, must set HAE #2. */
-	if (type1) {
-		haxr2 = *(vuip)APECS_IOC_HAXR2;
-		mb();
-		*(vuip)APECS_IOC_HAXR2 = haxr2 | 1;
-		DBGC(("conf_read: TYPE1 access\n"));
-	}
-
-	draina();
-	mcheck_expected(0) = 1;
-	mcheck_taken(0) = 0;
-	mb();
-
-	/* Access configuration space.  */
-
-	/* Some SRMs step on these registers during a machine check.  */
-	asm volatile("ldl %0,%1; mb; mb" : "=r"(value) : "m"(*(vuip)addr)
-		     : "$9", "$10", "$11", "$12", "$13", "$14", "memory");
-
-	if (mcheck_taken(0)) {
-		mcheck_taken(0) = 0;
-		value = 0xffffffffU;
-		mb();
-	}
-	mcheck_expected(0) = 0;
-	mb();
-
-#if 1
-	/*
-	 * david.rusling@reo.mts.dec.com.  This code is needed for the
-	 * EB64+ as it does not generate a machine check (why I don't
-	 * know).  When we build kernels for one particular platform
-	 * then we can make this conditional on the type.
-	 */
-	draina();
-
-	/* Now look for any errors.  */
-	stat0 = *(vuip)APECS_IOC_DCSR;
-	DBGC(("conf_read: APECS DCSR after read 0x%x\n", stat0));
-
-	/* Is any error bit set? */
-	if (stat0 & 0xffe0U) {
-		/* If not NDEV, print status.  */
-		if (!(stat0 & 0x0800)) {
-			printk("apecs.c:conf_read: got stat0=%x\n", stat0);
-		}
-
-		/* Reset error status.  */
-		*(vuip)APECS_IOC_DCSR = stat0;
-		mb();
-		wrmces(0x7);			/* reset machine check */
-		value = 0xffffffff;
-	}
-#endif
-
-	/* If Type1 access, must reset HAE #2 so normal IO space ops work.  */
-	if (type1) {
-		*(vuip)APECS_IOC_HAXR2 = haxr2 & ~1;
-		mb();
-	}
-	local_irq_restore(flags);
-
-	return value;
-}
-
-static void
-conf_write(unsigned long addr, unsigned int value, unsigned char type1)
-{
-	unsigned long flags;
-	unsigned int stat0;
-	unsigned int haxr2 = 0;
-
-	local_irq_save(flags);	/* avoid getting hit by machine check */
-
-	/* Reset status register to avoid losing errors.  */
-	stat0 = *(vuip)APECS_IOC_DCSR;
-	*(vuip)APECS_IOC_DCSR = stat0;
-	mb();
-
-	/* If Type1 access, must set HAE #2. */
-	if (type1) {
-		haxr2 = *(vuip)APECS_IOC_HAXR2;
-		mb();
-		*(vuip)APECS_IOC_HAXR2 = haxr2 | 1;
-	}
-
-	draina();
-	mcheck_expected(0) = 1;
-	mb();
-
-	/* Access configuration space.  */
-	*(vuip)addr = value;
-	mb();
-	mb();  /* magic */
-	mcheck_expected(0) = 0;
-	mb();
-
-#if 1
-	/*
-	 * david.rusling@reo.mts.dec.com.  This code is needed for the
-	 * EB64+ as it does not generate a machine check (why I don't
-	 * know).  When we build kernels for one particular platform
-	 * then we can make this conditional on the type.
-	 */
-	draina();
-
-	/* Now look for any errors.  */
-	stat0 = *(vuip)APECS_IOC_DCSR;
-
-	/* Is any error bit set? */
-	if (stat0 & 0xffe0U) {
-		/* If not NDEV, print status.  */
-		if (!(stat0 & 0x0800)) {
-			printk("apecs.c:conf_write: got stat0=%x\n", stat0);
-		}
-
-		/* Reset error status.  */
-		*(vuip)APECS_IOC_DCSR = stat0;
-		mb();
-		wrmces(0x7);			/* reset machine check */
-	}
-#endif
-
-	/* If Type1 access, must reset HAE #2 so normal IO space ops work.  */
-	if (type1) {
-		*(vuip)APECS_IOC_HAXR2 = haxr2 & ~1;
-		mb();
-	}
-	local_irq_restore(flags);
-}
-
-static int
-apecs_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-		  int size, u32 *value)
-{
-	unsigned long addr, pci_addr;
-	unsigned char type1;
-	long mask;
-	int shift;
-
-	if (mk_conf_addr(bus, devfn, where, &pci_addr, &type1))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	mask = (size - 1) * 8;
-	shift = (where & 3) * 8;
-	addr = (pci_addr << 5) + mask + APECS_CONF;
-	*value = conf_read(addr, type1) >> (shift);
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-apecs_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-		   int size, u32 value)
-{
-	unsigned long addr, pci_addr;
-	unsigned char type1;
-	long mask;
-
-	if (mk_conf_addr(bus, devfn, where, &pci_addr, &type1))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	mask = (size - 1) * 8;
-	addr = (pci_addr << 5) + mask + APECS_CONF;
-	conf_write(addr, value << ((where & 3) * 8), type1);
-	return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops apecs_pci_ops = 
-{
-	.read =		apecs_read_config,
-	.write =	apecs_write_config,
-};
-
-void
-apecs_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
-{
-	wmb();
-	*(vip)APECS_IOC_TBIA = 0;
-	mb();
-}
-
-void __init
-apecs_init_arch(void)
-{
-	struct pci_controller *hose;
-
-	/*
-	 * Create our single hose.
-	 */
-
-	pci_isa_hose = hose = alloc_pci_controller();
-	hose->io_space = &ioport_resource;
-	hose->mem_space = &iomem_resource;
-	hose->index = 0;
-
-	hose->sparse_mem_base = APECS_SPARSE_MEM - IDENT_ADDR;
-	hose->dense_mem_base = APECS_DENSE_MEM - IDENT_ADDR;
-	hose->sparse_io_base = APECS_IO - IDENT_ADDR;
-	hose->dense_io_base = 0;
-
-	/*
-	 * Set up the PCI to main memory translation windows.
-	 *
-	 * Window 1 is direct access 1GB at 1GB
-	 * Window 2 is scatter-gather 8MB at 8MB (for isa)
-	 */
-	hose->sg_isa = iommu_arena_new(hose, 0x00800000, 0x00800000,
-				       SMP_CACHE_BYTES);
-	hose->sg_pci = NULL;
-	__direct_map_base = 0x40000000;
-	__direct_map_size = 0x40000000;
-
-	*(vuip)APECS_IOC_PB1R = __direct_map_base | 0x00080000;
-	*(vuip)APECS_IOC_PM1R = (__direct_map_size - 1) & 0xfff00000U;
-	*(vuip)APECS_IOC_TB1R = 0;
-
-	*(vuip)APECS_IOC_PB2R = hose->sg_isa->dma_base | 0x000c0000;
-	*(vuip)APECS_IOC_PM2R = (hose->sg_isa->size - 1) & 0xfff00000;
-	*(vuip)APECS_IOC_TB2R = virt_to_phys(hose->sg_isa->ptes) >> 1;
-
-	apecs_pci_tbi(hose, 0, -1);
-
-	/*
-	 * Finally, clear the HAXR2 register, which gets used
-	 * for PCI Config Space accesses. That is the way
-	 * we want to use it, and we do not want to depend on
-	 * what ARC or SRM might have left behind...
-	 */
-	*(vuip)APECS_IOC_HAXR2 = 0;
-	mb();
-}
-
-void
-apecs_pci_clr_err(void)
-{
-	unsigned int jd;
-
-	jd = *(vuip)APECS_IOC_DCSR;
-	if (jd & 0xffe0L) {
-		*(vuip)APECS_IOC_SEAR;
-		*(vuip)APECS_IOC_DCSR = jd | 0xffe1L;
-		mb();
-		*(vuip)APECS_IOC_DCSR;
-	}
-	*(vuip)APECS_IOC_TBIA = (unsigned int)APECS_IOC_TBIA;
-	mb();
-	*(vuip)APECS_IOC_TBIA;
-}
-
-void
-apecs_machine_check(unsigned long vector, unsigned long la_ptr)
-{
-	struct el_common *mchk_header;
-	struct el_apecs_procdata *mchk_procdata;
-	struct el_apecs_sysdata_mcheck *mchk_sysdata;
-
-	mchk_header = (struct el_common *)la_ptr;
-
-	mchk_procdata = (struct el_apecs_procdata *)
-		(la_ptr + mchk_header->proc_offset
-		 - sizeof(mchk_procdata->paltemp));
-
-	mchk_sysdata = (struct el_apecs_sysdata_mcheck *)
-		(la_ptr + mchk_header->sys_offset);
-
-
-	/* Clear the error before any reporting.  */
-	mb();
-	mb(); /* magic */
-	draina();
-	apecs_pci_clr_err();
-	wrmces(0x7);		/* reset machine check pending flag */
-	mb();
-
-	process_mcheck_info(vector, la_ptr, "APECS",
-			    (mcheck_expected(0)
-			     && (mchk_sysdata->epic_dcsr & 0x0c00UL)));
-}
diff --git a/arch/alpha/kernel/core_cia.c b/arch/alpha/kernel/core_cia.c
index f489170201c3..6e577228e175 100644
--- a/arch/alpha/kernel/core_cia.c
+++ b/arch/alpha/kernel/core_cia.c
@@ -280,7 +280,7 @@ cia_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
 #define CIA_BROKEN_TBIA_SIZE	1024
 
 /* Always called with interrupts disabled */
-void
+static void
 cia_pci_tbi_try2(struct pci_controller *hose,
 		 dma_addr_t start, dma_addr_t end)
 {
@@ -331,10 +331,7 @@ cia_prepare_tbia_workaround(int window)
 	long i;
 
 	/* Use minimal 1K map. */
-	ppte = memblock_alloc(CIA_BROKEN_TBIA_SIZE, 32768);
-	if (!ppte)
-		panic("%s: Failed to allocate %u bytes align=0x%x\n",
-		      __func__, CIA_BROKEN_TBIA_SIZE, 32768);
+	ppte = memblock_alloc_or_panic(CIA_BROKEN_TBIA_SIZE, 32768);
 	pte = (virt_to_phys(ppte) >> (PAGE_SHIFT - 1)) | 1;
 
 	for (i = 0; i < CIA_BROKEN_TBIA_SIZE / sizeof(unsigned long); ++i)
@@ -527,7 +524,7 @@ verify_tb_operation(void)
 	if (use_tbia_try2) {
 		alpha_mv.mv_pci_tbi = cia_pci_tbi_try2;
 
-		/* Tags 0-3 must be disabled if we use this workaraund. */
+		/* Tags 0-3 must be disabled if we use this workaround. */
 		wmb();
 		*(vip)CIA_IOC_TB_TAGn(0) = 2;
 		*(vip)CIA_IOC_TB_TAGn(1) = 2;
@@ -576,7 +573,7 @@ struct
     } window[4];
 } saved_config __attribute((common));
 
-void
+static void
 cia_save_srm_settings(int is_pyxis)
 {
 	int i;
@@ -602,7 +599,7 @@ cia_save_srm_settings(int is_pyxis)
 	mb();
 }
 
-void
+static void
 cia_restore_srm_settings(void)
 {
 	int i;
diff --git a/arch/alpha/kernel/core_irongate.c b/arch/alpha/kernel/core_irongate.c
index 72af1e72d833..05dc4c1b9074 100644
--- a/arch/alpha/kernel/core_irongate.c
+++ b/arch/alpha/kernel/core_irongate.c
@@ -226,14 +226,13 @@ albacore_init_arch(void)
 	if (memtop > pci_mem) {
 #ifdef CONFIG_BLK_DEV_INITRD
 		extern unsigned long initrd_start, initrd_end;
-		extern void *move_initrd(unsigned long);
 
 		/* Move the initrd out of the way. */
 		if (initrd_end && __pa(initrd_end) > pci_mem) {
 			unsigned long size;
 
 			size = initrd_end - initrd_start;
-			memblock_free(__pa(initrd_start), PAGE_ALIGN(size));
+			memblock_free((void *)initrd_start, PAGE_ALIGN(size));
 			if (!move_initrd(pci_mem))
 				printk("irongate_init_arch: initrd too big "
 				       "(%ldK)\ndisabling initrd\n",
diff --git a/arch/alpha/kernel/core_lca.c b/arch/alpha/kernel/core_lca.c
deleted file mode 100644
index 57e0750419f2..000000000000
--- a/arch/alpha/kernel/core_lca.c
+++ /dev/null
@@ -1,517 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- *	linux/arch/alpha/kernel/core_lca.c
- *
- * Written by David Mosberger (davidm@cs.arizona.edu) with some code
- * taken from Dave Rusling's (david.rusling@reo.mts.dec.com) 32-bit
- * bios code.
- *
- * Code common to all LCA core logic chips.
- */
-
-#define __EXTERN_INLINE inline
-#include <asm/io.h>
-#include <asm/core_lca.h>
-#undef __EXTERN_INLINE
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/tty.h>
-
-#include <asm/ptrace.h>
-#include <asm/irq_regs.h>
-#include <asm/smp.h>
-
-#include "proto.h"
-#include "pci_impl.h"
-
-
-/*
- * BIOS32-style PCI interface:
- */
-
-/*
- * Machine check reasons.  Defined according to PALcode sources
- * (osf.h and platform.h).
- */
-#define MCHK_K_TPERR		0x0080
-#define MCHK_K_TCPERR		0x0082
-#define MCHK_K_HERR		0x0084
-#define MCHK_K_ECC_C		0x0086
-#define MCHK_K_ECC_NC		0x0088
-#define MCHK_K_UNKNOWN		0x008A
-#define MCHK_K_CACKSOFT		0x008C
-#define MCHK_K_BUGCHECK		0x008E
-#define MCHK_K_OS_BUGCHECK	0x0090
-#define MCHK_K_DCPERR		0x0092
-#define MCHK_K_ICPERR		0x0094
-
-
-/*
- * Platform-specific machine-check reasons:
- */
-#define MCHK_K_SIO_SERR		0x204	/* all platforms so far */
-#define MCHK_K_SIO_IOCHK	0x206	/* all platforms so far */
-#define MCHK_K_DCSR		0x208	/* all but Noname */
-
-
-/*
- * Given a bus, device, and function number, compute resulting
- * configuration space address and setup the LCA_IOC_CONF register
- * accordingly.  It is therefore not safe to have concurrent
- * invocations to configuration space access routines, but there
- * really shouldn't be any need for this.
- *
- * Type 0:
- *
- *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
- *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | | | | | | | | | | | | | | | | | | | | | | | |F|F|F|R|R|R|R|R|R|0|0|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- *	31:11	Device select bit.
- * 	10:8	Function number
- * 	 7:2	Register number
- *
- * Type 1:
- *
- *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
- *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- *	31:24	reserved
- *	23:16	bus number (8 bits = 128 possible buses)
- *	15:11	Device number (5 bits)
- *	10:8	function number
- *	 7:2	register number
- *  
- * Notes:
- *	The function number selects which function of a multi-function device 
- *	(e.g., SCSI and Ethernet).
- * 
- *	The register selects a DWORD (32 bit) register offset.  Hence it
- *	doesn't get shifted by 2 bits as we want to "drop" the bottom two
- *	bits.
- */
-
-static int
-mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where,
-	     unsigned long *pci_addr)
-{
-	unsigned long addr;
-	u8 bus = pbus->number;
-
-	if (bus == 0) {
-		int device = device_fn >> 3;
-		int func = device_fn & 0x7;
-
-		/* Type 0 configuration cycle.  */
-
-		if (device > 12) {
-			return -1;
-		}
-
-		*(vulp)LCA_IOC_CONF = 0;
-		addr = (1 << (11 + device)) | (func << 8) | where;
-	} else {
-		/* Type 1 configuration cycle.  */
-		*(vulp)LCA_IOC_CONF = 1;
-		addr = (bus << 16) | (device_fn << 8) | where;
-	}
-	*pci_addr = addr;
-	return 0;
-}
-
-static unsigned int
-conf_read(unsigned long addr)
-{
-	unsigned long flags, code, stat0;
-	unsigned int value;
-
-	local_irq_save(flags);
-
-	/* Reset status register to avoid losing errors.  */
-	stat0 = *(vulp)LCA_IOC_STAT0;
-	*(vulp)LCA_IOC_STAT0 = stat0;
-	mb();
-
-	/* Access configuration space.  */
-	value = *(vuip)addr;
-	draina();
-
-	stat0 = *(vulp)LCA_IOC_STAT0;
-	if (stat0 & LCA_IOC_STAT0_ERR) {
-		code = ((stat0 >> LCA_IOC_STAT0_CODE_SHIFT)
-			& LCA_IOC_STAT0_CODE_MASK);
-		if (code != 1) {
-			printk("lca.c:conf_read: got stat0=%lx\n", stat0);
-		}
-
-		/* Reset error status.  */
-		*(vulp)LCA_IOC_STAT0 = stat0;
-		mb();
-
-		/* Reset machine check.  */
-		wrmces(0x7);
-
-		value = 0xffffffff;
-	}
-	local_irq_restore(flags);
-	return value;
-}
-
-static void
-conf_write(unsigned long addr, unsigned int value)
-{
-	unsigned long flags, code, stat0;
-
-	local_irq_save(flags);	/* avoid getting hit by machine check */
-
-	/* Reset status register to avoid losing errors.  */
-	stat0 = *(vulp)LCA_IOC_STAT0;
-	*(vulp)LCA_IOC_STAT0 = stat0;
-	mb();
-
-	/* Access configuration space.  */
-	*(vuip)addr = value;
-	draina();
-
-	stat0 = *(vulp)LCA_IOC_STAT0;
-	if (stat0 & LCA_IOC_STAT0_ERR) {
-		code = ((stat0 >> LCA_IOC_STAT0_CODE_SHIFT)
-			& LCA_IOC_STAT0_CODE_MASK);
-		if (code != 1) {
-			printk("lca.c:conf_write: got stat0=%lx\n", stat0);
-		}
-
-		/* Reset error status.  */
-		*(vulp)LCA_IOC_STAT0 = stat0;
-		mb();
-
-		/* Reset machine check. */
-		wrmces(0x7);
-	}
-	local_irq_restore(flags);
-}
-
-static int
-lca_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-		int size, u32 *value)
-{
-	unsigned long addr, pci_addr;
-	long mask;
-	int shift;
-
-	if (mk_conf_addr(bus, devfn, where, &pci_addr))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	shift = (where & 3) * 8;
-	mask = (size - 1) * 8;
-	addr = (pci_addr << 5) + mask + LCA_CONF;
-	*value = conf_read(addr) >> (shift);
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int 
-lca_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size,
-		 u32 value)
-{
-	unsigned long addr, pci_addr;
-	long mask;
-
-	if (mk_conf_addr(bus, devfn, where, &pci_addr))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	mask = (size - 1) * 8;
-	addr = (pci_addr << 5) + mask + LCA_CONF;
-	conf_write(addr, value << ((where & 3) * 8));
-	return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops lca_pci_ops = 
-{
-	.read =		lca_read_config,
-	.write =	lca_write_config,
-};
-
-void
-lca_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
-{
-	wmb();
-	*(vulp)LCA_IOC_TBIA = 0;
-	mb();
-}
-
-void __init
-lca_init_arch(void)
-{
-	struct pci_controller *hose;
-
-	/*
-	 * Create our single hose.
-	 */
-
-	pci_isa_hose = hose = alloc_pci_controller();
-	hose->io_space = &ioport_resource;
-	hose->mem_space = &iomem_resource;
-	hose->index = 0;
-
-	hose->sparse_mem_base = LCA_SPARSE_MEM - IDENT_ADDR;
-	hose->dense_mem_base = LCA_DENSE_MEM - IDENT_ADDR;
-	hose->sparse_io_base = LCA_IO - IDENT_ADDR;
-	hose->dense_io_base = 0;
-
-	/*
-	 * Set up the PCI to main memory translation windows.
-	 *
-	 * Mimic the SRM settings for the direct-map window.
-	 *   Window 0 is scatter-gather 8MB at 8MB (for isa).
-	 *   Window 1 is direct access 1GB at 1GB.
-	 *
-	 * Note that we do not try to save any of the DMA window CSRs
-	 * before setting them, since we cannot read those CSRs on LCA.
-	 */
-	hose->sg_isa = iommu_arena_new(hose, 0x00800000, 0x00800000,
-				       SMP_CACHE_BYTES);
-	hose->sg_pci = NULL;
-	__direct_map_base = 0x40000000;
-	__direct_map_size = 0x40000000;
-
-	*(vulp)LCA_IOC_W_BASE0 = hose->sg_isa->dma_base | (3UL << 32);
-	*(vulp)LCA_IOC_W_MASK0 = (hose->sg_isa->size - 1) & 0xfff00000;
-	*(vulp)LCA_IOC_T_BASE0 = virt_to_phys(hose->sg_isa->ptes);
-
-	*(vulp)LCA_IOC_W_BASE1 = __direct_map_base | (2UL << 32);
-	*(vulp)LCA_IOC_W_MASK1 = (__direct_map_size - 1) & 0xfff00000;
-	*(vulp)LCA_IOC_T_BASE1 = 0;
-
-	*(vulp)LCA_IOC_TB_ENA = 0x80;
-
-	lca_pci_tbi(hose, 0, -1);
-
-	/*
-	 * Disable PCI parity for now.  The NCR53c810 chip has
-	 * troubles meeting the PCI spec which results in
-	 * data parity errors.
-	 */
-	*(vulp)LCA_IOC_PAR_DIS = 1UL<<5;
-
-	/*
-	 * Finally, set up for restoring the correct HAE if using SRM.
-	 * Again, since we cannot read many of the CSRs on the LCA,
-	 * one of which happens to be the HAE, we save the value that
-	 * the SRM will expect...
-	 */
-	if (alpha_using_srm)
-		srm_hae = 0x80000000UL;
-}
-
-/*
- * Constants used during machine-check handling.  I suppose these
- * could be moved into lca.h but I don't see much reason why anybody
- * else would want to use them.
- */
-
-#define ESR_EAV		(1UL<< 0)	/* error address valid */
-#define ESR_CEE		(1UL<< 1)	/* correctable error */
-#define ESR_UEE		(1UL<< 2)	/* uncorrectable error */
-#define ESR_WRE		(1UL<< 3)	/* write-error */
-#define ESR_SOR		(1UL<< 4)	/* error source */
-#define ESR_CTE		(1UL<< 7)	/* cache-tag error */
-#define ESR_MSE		(1UL<< 9)	/* multiple soft errors */
-#define ESR_MHE		(1UL<<10)	/* multiple hard errors */
-#define ESR_NXM		(1UL<<12)	/* non-existent memory */
-
-#define IOC_ERR		(  1<<4)	/* ioc logs an error */
-#define IOC_CMD_SHIFT	0
-#define IOC_CMD		(0xf<<IOC_CMD_SHIFT)
-#define IOC_CODE_SHIFT	8
-#define IOC_CODE	(0xf<<IOC_CODE_SHIFT)
-#define IOC_LOST	(  1<<5)
-#define IOC_P_NBR	((__u32) ~((1<<13) - 1))
-
-static void
-mem_error(unsigned long esr, unsigned long ear)
-{
-	printk("    %s %s error to %s occurred at address %x\n",
-	       ((esr & ESR_CEE) ? "Correctable" :
-		(esr & ESR_UEE) ? "Uncorrectable" : "A"),
-	       (esr & ESR_WRE) ? "write" : "read",
-	       (esr & ESR_SOR) ? "memory" : "b-cache",
-	       (unsigned) (ear & 0x1ffffff8));
-	if (esr & ESR_CTE) {
-		printk("    A b-cache tag parity error was detected.\n");
-	}
-	if (esr & ESR_MSE) {
-		printk("    Several other correctable errors occurred.\n");
-	}
-	if (esr & ESR_MHE) {
-		printk("    Several other uncorrectable errors occurred.\n");
-	}
-	if (esr & ESR_NXM) {
-		printk("    Attempted to access non-existent memory.\n");
-	}
-}
-
-static void
-ioc_error(__u32 stat0, __u32 stat1)
-{
-	static const char * const pci_cmd[] = {
-		"Interrupt Acknowledge", "Special", "I/O Read", "I/O Write",
-		"Rsvd 1", "Rsvd 2", "Memory Read", "Memory Write", "Rsvd3",
-		"Rsvd4", "Configuration Read", "Configuration Write",
-		"Memory Read Multiple", "Dual Address", "Memory Read Line",
-		"Memory Write and Invalidate"
-	};
-	static const char * const err_name[] = {
-		"exceeded retry limit", "no device", "bad data parity",
-		"target abort", "bad address parity", "page table read error",
-		"invalid page", "data error"
-	};
-	unsigned code = (stat0 & IOC_CODE) >> IOC_CODE_SHIFT;
-	unsigned cmd  = (stat0 & IOC_CMD)  >> IOC_CMD_SHIFT;
-
-	printk("    %s initiated PCI %s cycle to address %x"
-	       " failed due to %s.\n",
-	       code > 3 ? "PCI" : "CPU", pci_cmd[cmd], stat1, err_name[code]);
-
-	if (code == 5 || code == 6) {
-		printk("    (Error occurred at PCI memory address %x.)\n",
-		       (stat0 & ~IOC_P_NBR));
-	}
-	if (stat0 & IOC_LOST) {
-		printk("    Other PCI errors occurred simultaneously.\n");
-	}
-}
-
-void
-lca_machine_check(unsigned long vector, unsigned long la_ptr)
-{
-	const char * reason;
-	union el_lca el;
-
-	el.c = (struct el_common *) la_ptr;
-
-	wrmces(rdmces());	/* reset machine check pending flag */
-
-	printk(KERN_CRIT "LCA machine check: vector=%#lx pc=%#lx code=%#x\n",
-	       vector, get_irq_regs()->pc, (unsigned int) el.c->code);
-
-	/*
-	 * The first quadword after the common header always seems to
-	 * be the machine check reason---don't know why this isn't
-	 * part of the common header instead.  In the case of a long
-	 * logout frame, the upper 32 bits is the machine check
-	 * revision level, which we ignore for now.
-	 */
-	switch ((unsigned int) el.c->code) {
-	case MCHK_K_TPERR:	reason = "tag parity error"; break;
-	case MCHK_K_TCPERR:	reason = "tag control parity error"; break;
-	case MCHK_K_HERR:	reason = "access to non-existent memory"; break;
-	case MCHK_K_ECC_C:	reason = "correctable ECC error"; break;
-	case MCHK_K_ECC_NC:	reason = "non-correctable ECC error"; break;
-	case MCHK_K_CACKSOFT:	reason = "MCHK_K_CACKSOFT"; break;
-	case MCHK_K_BUGCHECK:	reason = "illegal exception in PAL mode"; break;
-	case MCHK_K_OS_BUGCHECK: reason = "callsys in kernel mode"; break;
-	case MCHK_K_DCPERR:	reason = "d-cache parity error"; break;
-	case MCHK_K_ICPERR:	reason = "i-cache parity error"; break;
-	case MCHK_K_SIO_SERR:	reason = "SIO SERR occurred on PCI bus"; break;
-	case MCHK_K_SIO_IOCHK:	reason = "SIO IOCHK occurred on ISA bus"; break;
-	case MCHK_K_DCSR:	reason = "MCHK_K_DCSR"; break;
-	case MCHK_K_UNKNOWN:
-	default:		reason = "unknown"; break;
-	}
-
-	switch (el.c->size) {
-	case sizeof(struct el_lca_mcheck_short):
-		printk(KERN_CRIT
-		       "  Reason: %s (short frame%s, dc_stat=%#lx):\n",
-		       reason, el.c->retry ? ", retryable" : "",
-		       el.s->dc_stat);
-		if (el.s->esr & ESR_EAV) {
-			mem_error(el.s->esr, el.s->ear);
-		}
-		if (el.s->ioc_stat0 & IOC_ERR) {
-			ioc_error(el.s->ioc_stat0, el.s->ioc_stat1);
-		}
-		break;
-
-	case sizeof(struct el_lca_mcheck_long):
-		printk(KERN_CRIT "  Reason: %s (long frame%s):\n",
-		       reason, el.c->retry ? ", retryable" : "");
-		printk(KERN_CRIT
-		       "    reason: %#lx  exc_addr: %#lx  dc_stat: %#lx\n", 
-		       el.l->pt[0], el.l->exc_addr, el.l->dc_stat);
-		printk(KERN_CRIT "    car: %#lx\n", el.l->car);
-		if (el.l->esr & ESR_EAV) {
-			mem_error(el.l->esr, el.l->ear);
-		}
-		if (el.l->ioc_stat0 & IOC_ERR) {
-			ioc_error(el.l->ioc_stat0, el.l->ioc_stat1);
-		}
-		break;
-
-	default:
-		printk(KERN_CRIT "  Unknown errorlog size %d\n", el.c->size);
-	}
-
-	/* Dump the logout area to give all info.  */
-#ifdef CONFIG_VERBOSE_MCHECK
-	if (alpha_verbose_mcheck > 1) {
-		unsigned long * ptr = (unsigned long *) la_ptr;
-		long i;
-		for (i = 0; i < el.c->size / sizeof(long); i += 2) {
-			printk(KERN_CRIT " +%8lx %016lx %016lx\n",
-			       i*sizeof(long), ptr[i], ptr[i+1]);
-		}
-	}
-#endif /* CONFIG_VERBOSE_MCHECK */
-}
-
-/*
- * The following routines are needed to support the SPEED changing
- * necessary to successfully manage the thermal problem on the AlphaBook1.
- */
-
-void
-lca_clock_print(void)
-{
-        long    pmr_reg;
-
-        pmr_reg = LCA_READ_PMR;
-
-        printk("Status of clock control:\n");
-        printk("\tPrimary clock divisor\t0x%lx\n", LCA_GET_PRIMARY(pmr_reg));
-        printk("\tOverride clock divisor\t0x%lx\n", LCA_GET_OVERRIDE(pmr_reg));
-        printk("\tInterrupt override is %s\n",
-	       (pmr_reg & LCA_PMR_INTO) ? "on" : "off"); 
-        printk("\tDMA override is %s\n",
-	       (pmr_reg & LCA_PMR_DMAO) ? "on" : "off"); 
-
-}
-
-int
-lca_get_clock(void)
-{
-        long    pmr_reg;
-
-        pmr_reg = LCA_READ_PMR;
-        return(LCA_GET_PRIMARY(pmr_reg));
-
-}
-
-void
-lca_clock_fiddle(int divisor)
-{
-        long    pmr_reg;
-
-        pmr_reg = LCA_READ_PMR;
-        LCA_SET_PRIMARY_CLOCK(pmr_reg, divisor);
-	/* lca_norm_clock = divisor; */
-        LCA_WRITE_PMR(pmr_reg);
-        mb();
-}
diff --git a/arch/alpha/kernel/core_marvel.c b/arch/alpha/kernel/core_marvel.c
index 1efca79ac83c..d38f4d6759e4 100644
--- a/arch/alpha/kernel/core_marvel.c
+++ b/arch/alpha/kernel/core_marvel.c
@@ -17,6 +17,7 @@
 #include <linux/vmalloc.h>
 #include <linux/mc146818rtc.h>
 #include <linux/rtc.h>
+#include <linux/string.h>
 #include <linux/module.h>
 #include <linux/memblock.h>
 
@@ -79,13 +80,12 @@ mk_resource_name(int pe, int port, char *str)
 {
 	char tmp[80];
 	char *name;
-	
-	sprintf(tmp, "PCI %s PE %d PORT %d", str, pe, port);
-	name = memblock_alloc(strlen(tmp) + 1, SMP_CACHE_BYTES);
-	if (!name)
-		panic("%s: Failed to allocate %zu bytes\n", __func__,
-		      strlen(tmp) + 1);
-	strcpy(name, tmp);
+	size_t sz;
+
+	sz = scnprintf(tmp, sizeof(tmp), "PCI %s PE %d PORT %d", str, pe, port);
+	sz += 1; /* NUL terminator */
+	name = memblock_alloc_or_panic(sz, SMP_CACHE_BYTES);
+	strscpy(name, tmp, sz);
 
 	return name;
 }
@@ -119,10 +119,7 @@ alloc_io7(unsigned int pe)
 		return NULL;
 	}
 
-	io7 = memblock_alloc(sizeof(*io7), SMP_CACHE_BYTES);
-	if (!io7)
-		panic("%s: Failed to allocate %zu bytes\n", __func__,
-		      sizeof(*io7));
+	io7 = memblock_alloc_or_panic(sizeof(*io7), SMP_CACHE_BYTES);
 	io7->pe = pe;
 	raw_spin_lock_init(&io7->irq_lock);
 
@@ -355,7 +352,7 @@ marvel_init_io7(struct io7 *io7)
 	}
 }
 
-void __init
+static void __init
 marvel_io7_present(gct6_node *node)
 {
 	int pe;
@@ -803,7 +800,7 @@ void __iomem *marvel_ioportmap (unsigned long addr)
 	return (void __iomem *)addr;
 }
 
-unsigned int
+u8
 marvel_ioread8(const void __iomem *xaddr)
 {
 	unsigned long addr = (unsigned long) xaddr;
diff --git a/arch/alpha/kernel/core_t2.c b/arch/alpha/kernel/core_t2.c
index 98d5b6ff8a76..3d72d90624f1 100644
--- a/arch/alpha/kernel/core_t2.c
+++ b/arch/alpha/kernel/core_t2.c
@@ -10,7 +10,7 @@
  * Code common to all T2 core logic chips.
  */
 
-#define __EXTERN_INLINE
+#define __EXTERN_INLINE inline
 #include <asm/io.h>
 #include <asm/core_t2.h>
 #undef __EXTERN_INLINE
diff --git a/arch/alpha/kernel/core_wildfire.c b/arch/alpha/kernel/core_wildfire.c
index 3a804b67f9da..8dd08c5e4270 100644
--- a/arch/alpha/kernel/core_wildfire.c
+++ b/arch/alpha/kernel/core_wildfire.c
@@ -59,7 +59,7 @@ unsigned long wildfire_pca_mask;
 unsigned long wildfire_cpu_mask;
 unsigned long wildfire_mem_mask;
 
-void __init
+static void __init
 wildfire_init_hose(int qbbno, int hoseno)
 {
 	struct pci_controller *hose;
@@ -137,7 +137,7 @@ wildfire_init_hose(int qbbno, int hoseno)
 	wildfire_pci_tbi(hose, 0, 0); /* Flush TLB at the end. */
 }
 
-void __init
+static void __init
 wildfire_init_pca(int qbbno, int pcano)
 {
 
@@ -154,7 +154,7 @@ wildfire_init_pca(int qbbno, int pcano)
 	wildfire_init_hose(qbbno, (pcano << 1) + 1);
 }
 
-void __init
+static void __init
 wildfire_init_qbb(int qbbno)
 {
 	int pcano;
@@ -176,7 +176,7 @@ wildfire_init_qbb(int qbbno)
 	}
 }
 
-void __init
+static void __init
 wildfire_hardware_probe(void)
 {
 	unsigned long temp;
diff --git a/arch/alpha/kernel/entry.S b/arch/alpha/kernel/entry.S
index e227f3a29a43..f4d41b4538c2 100644
--- a/arch/alpha/kernel/entry.S
+++ b/arch/alpha/kernel/entry.S
@@ -15,10 +15,6 @@
 	.set noat
 	.cfi_sections	.debug_frame
 
-/* Stack offsets.  */
-#define SP_OFF			184
-#define SWITCH_STACK_SIZE	320
-
 .macro	CFI_START_OSF_FRAME	func
 	.align	4
 	.globl	\func
@@ -159,7 +155,6 @@
 	.cfi_rel_offset	$13, 32
 	.cfi_rel_offset	$14, 40
 	.cfi_rel_offset	$15, 48
-	/* We don't really care about the FP registers for debugging.  */
 .endm
 
 .macro	UNDO_SWITCH_STACK
@@ -199,8 +194,8 @@ CFI_END_OSF_FRAME entArith
 CFI_START_OSF_FRAME entMM
 	SAVE_ALL
 /* save $9 - $15 so the inline exception code can manipulate them.  */
-	subq	$sp, 56, $sp
-	.cfi_adjust_cfa_offset	56
+	subq	$sp, 64, $sp
+	.cfi_adjust_cfa_offset	64
 	stq	$9, 0($sp)
 	stq	$10, 8($sp)
 	stq	$11, 16($sp)
@@ -215,7 +210,7 @@ CFI_START_OSF_FRAME entMM
 	.cfi_rel_offset	$13, 32
 	.cfi_rel_offset	$14, 40
 	.cfi_rel_offset	$15, 48
-	addq	$sp, 56, $19
+	addq	$sp, 64, $19
 /* handle the fault */
 	lda	$8, 0x3fff
 	bic	$sp, $8, $8
@@ -228,7 +223,7 @@ CFI_START_OSF_FRAME entMM
 	ldq	$13, 32($sp)
 	ldq	$14, 40($sp)
 	ldq	$15, 48($sp)
-	addq	$sp, 56, $sp
+	addq	$sp, 64, $sp
 	.cfi_restore	$9
 	.cfi_restore	$10
 	.cfi_restore	$11
@@ -236,7 +231,7 @@ CFI_START_OSF_FRAME entMM
 	.cfi_restore	$13
 	.cfi_restore	$14
 	.cfi_restore	$15
-	.cfi_adjust_cfa_offset	-56
+	.cfi_adjust_cfa_offset	-64
 /* finish up the syscall as normal.  */
 	br	ret_from_sys_call
 CFI_END_OSF_FRAME entMM
@@ -383,8 +378,8 @@ entUnaUser:
 	.cfi_restore	$0
 	.cfi_adjust_cfa_offset	-256
 	SAVE_ALL		/* setup normal kernel stack */
-	lda	$sp, -56($sp)
-	.cfi_adjust_cfa_offset	56
+	lda	$sp, -64($sp)
+	.cfi_adjust_cfa_offset	64
 	stq	$9, 0($sp)
 	stq	$10, 8($sp)
 	stq	$11, 16($sp)
@@ -400,7 +395,7 @@ entUnaUser:
 	.cfi_rel_offset	$14, 40
 	.cfi_rel_offset	$15, 48
 	lda	$8, 0x3fff
-	addq	$sp, 56, $19
+	addq	$sp, 64, $19
 	bic	$sp, $8, $8
 	jsr	$26, do_entUnaUser
 	ldq	$9, 0($sp)
@@ -410,7 +405,7 @@ entUnaUser:
 	ldq	$13, 32($sp)
 	ldq	$14, 40($sp)
 	ldq	$15, 48($sp)
-	lda	$sp, 56($sp)
+	lda	$sp, 64($sp)
 	.cfi_restore	$9
 	.cfi_restore	$10
 	.cfi_restore	$11
@@ -418,7 +413,7 @@ entUnaUser:
 	.cfi_restore	$13
 	.cfi_restore	$14
 	.cfi_restore	$15
-	.cfi_adjust_cfa_offset	-56
+	.cfi_adjust_cfa_offset	-64
 	br	ret_from_sys_call
 CFI_END_OSF_FRAME entUna
 
@@ -454,7 +449,7 @@ entSys:
 	SAVE_ALL
 	lda	$8, 0x3fff
 	bic	$sp, $8, $8
-	lda	$4, NR_SYSCALLS($31)
+	lda	$4, NR_syscalls($31)
 	stq	$16, SP_OFF+24($sp)
 	lda	$5, sys_call_table
 	lda	$27, sys_ni_syscall
@@ -469,13 +464,16 @@ entSys:
 #ifdef CONFIG_AUDITSYSCALL
 	lda     $6, _TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT
 	and     $3, $6, $3
-#endif
 	bne     $3, strace
+#else
+	blbs    $3, strace		/* check for SYSCALL_TRACE in disguise */
+#endif
 	beq	$4, 1f
 	ldq	$27, 0($5)
 1:	jsr	$26, ($27), sys_ni_syscall
 	ldgp	$gp, 0($26)
 	blt	$0, $syscall_error	/* the call failed */
+$ret_success:
 	stq	$0, 0($sp)
 	stq	$31, 72($sp)		/* a3=0 => no error */
 
@@ -495,6 +493,10 @@ ret_to_user:
 	and	$17, _TIF_WORK_MASK, $2
 	bne	$2, work_pending
 restore_all:
+	ldl	$2, TI_STATUS($8)
+	and	$2, TS_SAVED_FP | TS_RESTORE_FP, $3
+	bne	$3, restore_fpu
+restore_other:
 	.cfi_remember_state
 	RESTORE_ALL
 	call_pal PAL_rti
@@ -503,7 +505,7 @@ ret_to_kernel:
 	.cfi_restore_state
 	lda	$16, 7
 	call_pal PAL_swpipl
-	br restore_all
+	br restore_other
 
 	.align 3
 $syscall_error:
@@ -525,11 +527,6 @@ $syscall_error:
 	stq	$1, 72($sp)	/* a3 for return */
 	br	ret_from_sys_call
 
-$ret_success:
-	stq	$0, 0($sp)
-	stq	$31, 72($sp)	/* a3=0 => no error */
-	br	ret_from_sys_call
-
 /*
  * Do all cleanup when returning from all interrupts and system calls.
  *
@@ -572,6 +569,14 @@ $work_notifysig:
 	.type	strace, @function
 strace:
 	/* set up signal stack, call syscall_trace */
+	// NB: if anyone adds preemption, this block will need to be protected
+	ldl	$1, TI_STATUS($8)
+	and	$1, TS_SAVED_FP, $3
+	or	$1, TS_SAVED_FP, $2
+	bne	$3, 1f
+	stl	$2, TI_STATUS($8)
+	bsr	$26, __save_fpu
+1:
 	DO_SWITCH_STACK
 	jsr	$26, syscall_trace_enter /* returns the syscall number */
 	UNDO_SWITCH_STACK
@@ -585,7 +590,7 @@ strace:
 	ldq	$21, 88($sp)
 
 	/* get the system call pointer.. */
-	lda	$1, NR_SYSCALLS($31)
+	lda	$1, NR_syscalls($31)
 	lda	$2, sys_call_table
 	lda	$27, sys_ni_syscall
 	cmpult	$0, $1, $1
@@ -598,8 +603,8 @@ ret_from_straced:
 
 	/* check return.. */
 	blt	$0, $strace_error	/* the call failed */
-	stq	$31, 72($sp)		/* a3=0 => no error */
 $strace_success:
+	stq	$31, 72($sp)		/* a3=0 => no error */
 	stq	$0, 0($sp)		/* save return value */
 
 	DO_SWITCH_STACK
@@ -651,40 +656,6 @@ do_switch_stack:
 	stq	$14, 40($sp)
 	stq	$15, 48($sp)
 	stq	$26, 56($sp)
-	stt	$f0, 64($sp)
-	stt	$f1, 72($sp)
-	stt	$f2, 80($sp)
-	stt	$f3, 88($sp)
-	stt	$f4, 96($sp)
-	stt	$f5, 104($sp)
-	stt	$f6, 112($sp)
-	stt	$f7, 120($sp)
-	stt	$f8, 128($sp)
-	stt	$f9, 136($sp)
-	stt	$f10, 144($sp)
-	stt	$f11, 152($sp)
-	stt	$f12, 160($sp)
-	stt	$f13, 168($sp)
-	stt	$f14, 176($sp)
-	stt	$f15, 184($sp)
-	stt	$f16, 192($sp)
-	stt	$f17, 200($sp)
-	stt	$f18, 208($sp)
-	stt	$f19, 216($sp)
-	stt	$f20, 224($sp)
-	stt	$f21, 232($sp)
-	stt	$f22, 240($sp)
-	stt	$f23, 248($sp)
-	stt	$f24, 256($sp)
-	stt	$f25, 264($sp)
-	stt	$f26, 272($sp)
-	stt	$f27, 280($sp)
-	mf_fpcr	$f0		# get fpcr
-	stt	$f28, 288($sp)
-	stt	$f29, 296($sp)
-	stt	$f30, 304($sp)
-	stt	$f0, 312($sp)	# save fpcr in slot of $f31
-	ldt	$f0, 64($sp)	# dont let "do_switch_stack" change fp state.
 	ret	$31, ($1), 1
 	.cfi_endproc
 	.size	do_switch_stack, .-do_switch_stack
@@ -703,54 +674,71 @@ undo_switch_stack:
 	ldq	$14, 40($sp)
 	ldq	$15, 48($sp)
 	ldq	$26, 56($sp)
-	ldt	$f30, 312($sp)	# get saved fpcr
-	ldt	$f0, 64($sp)
-	ldt	$f1, 72($sp)
-	ldt	$f2, 80($sp)
-	ldt	$f3, 88($sp)
-	mt_fpcr	$f30		# install saved fpcr
-	ldt	$f4, 96($sp)
-	ldt	$f5, 104($sp)
-	ldt	$f6, 112($sp)
-	ldt	$f7, 120($sp)
-	ldt	$f8, 128($sp)
-	ldt	$f9, 136($sp)
-	ldt	$f10, 144($sp)
-	ldt	$f11, 152($sp)
-	ldt	$f12, 160($sp)
-	ldt	$f13, 168($sp)
-	ldt	$f14, 176($sp)
-	ldt	$f15, 184($sp)
-	ldt	$f16, 192($sp)
-	ldt	$f17, 200($sp)
-	ldt	$f18, 208($sp)
-	ldt	$f19, 216($sp)
-	ldt	$f20, 224($sp)
-	ldt	$f21, 232($sp)
-	ldt	$f22, 240($sp)
-	ldt	$f23, 248($sp)
-	ldt	$f24, 256($sp)
-	ldt	$f25, 264($sp)
-	ldt	$f26, 272($sp)
-	ldt	$f27, 280($sp)
-	ldt	$f28, 288($sp)
-	ldt	$f29, 296($sp)
-	ldt	$f30, 304($sp)
 	lda	$sp, SWITCH_STACK_SIZE($sp)
 	ret	$31, ($1), 1
 	.cfi_endproc
 	.size	undo_switch_stack, .-undo_switch_stack
+
+#define FR(n) n * 8 + TI_FP($8)
+	.align	4
+	.globl	__save_fpu
+	.type	__save_fpu, @function
+__save_fpu:
+#define V(n) stt	$f##n, FR(n)
+	V( 0); V( 1); V( 2); V( 3)
+	V( 4); V( 5); V( 6); V( 7)
+	V( 8); V( 9); V(10); V(11)
+	V(12); V(13); V(14); V(15)
+	V(16); V(17); V(18); V(19)
+	V(20); V(21); V(22); V(23)
+	V(24); V(25); V(26); V(27)
+	mf_fpcr	$f0		# get fpcr
+	V(28); V(29); V(30)
+	stt	$f0, FR(31)	# save fpcr in slot of $f31
+	ldt	$f0, FR(0)	# don't let "__save_fpu" change fp state.
+	ret
+#undef V
+	.size	__save_fpu, .-__save_fpu
+
+	.align	4
+restore_fpu:
+	and	$3, TS_RESTORE_FP, $3
+	bic	$2, TS_SAVED_FP | TS_RESTORE_FP, $2
+	beq	$3, 1f
+#define V(n) ldt	$f##n, FR(n)
+	ldt	$f30, FR(31)	# get saved fpcr
+	V( 0); V( 1); V( 2); V( 3)
+	mt_fpcr	$f30		# install saved fpcr
+	V( 4); V( 5); V( 6); V( 7)
+	V( 8); V( 9); V(10); V(11)
+	V(12); V(13); V(14); V(15)
+	V(16); V(17); V(18); V(19)
+	V(20); V(21); V(22); V(23)
+	V(24); V(25); V(26); V(27)
+	V(28); V(29); V(30)
+1:	stl $2, TI_STATUS($8)
+	br restore_other
+#undef V
+
 
 /*
  * The meat of the context switch code.
  */
-
 	.align	4
 	.globl	alpha_switch_to
 	.type	alpha_switch_to, @function
 	.cfi_startproc
 alpha_switch_to:
 	DO_SWITCH_STACK
+	ldl	$1, TI_STATUS($8)
+	and	$1, TS_RESTORE_FP, $3
+	bne	$3, 1f
+	or	$1, TS_RESTORE_FP | TS_SAVED_FP, $2
+	and	$1, TS_SAVED_FP, $3
+	stl	$2, TI_STATUS($8)
+	bne	$3, 1f
+	bsr	$26, __save_fpu
+1:
 	call_pal PAL_swpctx
 	lda	$8, 0x3fff
 	UNDO_SWITCH_STACK
@@ -768,7 +756,7 @@ alpha_switch_to:
 	.align	4
 	.ent	ret_from_fork
 ret_from_fork:
-	lda	$26, ret_from_sys_call
+	lda	$26, ret_to_user
 	mov	$17, $16
 	jmp	$31, schedule_tail
 .end ret_from_fork
@@ -801,6 +789,14 @@ ret_from_kernel_thread:
 alpha_\name:
 	.prologue 0
 	bsr	$1, do_switch_stack
+	// NB: if anyone adds preemption, this block will need to be protected
+	ldl	$1, TI_STATUS($8)
+	and	$1, TS_SAVED_FP, $3
+	or	$1, TS_SAVED_FP, $2
+	bne	$3, 1f
+	stl	$2, TI_STATUS($8)
+	bsr	$26, __save_fpu
+1:
 	jsr	$26, sys_\name
 	ldq	$26, 56($sp)
 	lda	$sp, SWITCH_STACK_SIZE($sp)
@@ -811,6 +807,7 @@ alpha_\name:
 fork_like fork
 fork_like vfork
 fork_like clone
+fork_like clone3
 
 .macro	sigreturn_like name
 	.align	4
diff --git a/arch/alpha/kernel/io.c b/arch/alpha/kernel/io.c
index 838586abb1e0..c28035d6d1e6 100644
--- a/arch/alpha/kernel/io.c
+++ b/arch/alpha/kernel/io.c
@@ -41,6 +41,15 @@ unsigned int ioread32(const void __iomem *addr)
 	return ret;
 }
 
+u64 ioread64(const void __iomem *addr)
+{
+	unsigned int ret;
+	mb();
+	ret = IO_CONCAT(__IO_PREFIX,ioread64)(addr);
+	mb();
+	return ret;
+}
+
 void iowrite8(u8 b, void __iomem *addr)
 {
 	mb();
@@ -59,12 +68,20 @@ void iowrite32(u32 b, void __iomem *addr)
 	IO_CONCAT(__IO_PREFIX,iowrite32)(b, addr);
 }
 
+void iowrite64(u64 b, void __iomem *addr)
+{
+	mb();
+	IO_CONCAT(__IO_PREFIX,iowrite64)(b, addr);
+}
+
 EXPORT_SYMBOL(ioread8);
 EXPORT_SYMBOL(ioread16);
 EXPORT_SYMBOL(ioread32);
+EXPORT_SYMBOL(ioread64);
 EXPORT_SYMBOL(iowrite8);
 EXPORT_SYMBOL(iowrite16);
 EXPORT_SYMBOL(iowrite32);
+EXPORT_SYMBOL(iowrite64);
 
 u8 inb(unsigned long port)
 {
@@ -630,6 +647,10 @@ void _memset_c_io(volatile void __iomem *to, unsigned long c, long count)
 
 EXPORT_SYMBOL(_memset_c_io);
 
+#if IS_ENABLED(CONFIG_VGA_CONSOLE) || IS_ENABLED(CONFIG_MDA_CONSOLE)
+
+#include <asm/vga.h>
+
 /* A version of memcpy used by the vga console routines to move data around
    arbitrarily between screen and main memory.  */
 
@@ -664,6 +685,21 @@ scr_memcpyw(u16 *d, const u16 *s, unsigned int count)
 
 EXPORT_SYMBOL(scr_memcpyw);
 
+void scr_memmovew(u16 *d, const u16 *s, unsigned int count)
+{
+	if (d < s)
+		scr_memcpyw(d, s, count);
+	else {
+		count /= 2;
+		d += count;
+		s += count;
+		while (count--)
+			scr_writew(scr_readw(--s), --d);
+	}
+}
+EXPORT_SYMBOL(scr_memmovew);
+#endif
+
 void __iomem *ioport_map(unsigned long port, unsigned int size)
 {
 	return IO_CONCAT(__IO_PREFIX,ioportmap) (port);
diff --git a/arch/alpha/kernel/irq.c b/arch/alpha/kernel/irq.c
index f6d2946edbd2..c67047c5d830 100644
--- a/arch/alpha/kernel/irq.c
+++ b/arch/alpha/kernel/irq.c
@@ -28,6 +28,7 @@
 
 #include <asm/io.h>
 #include <linux/uaccess.h>
+#include "irq_impl.h"
 
 volatile unsigned long irq_err_count;
 DEFINE_PER_CPU(unsigned long, irq_pmi_count);
@@ -60,7 +61,7 @@ int irq_select_affinity(unsigned int irq)
 		cpu = (cpu < (NR_CPUS-1) ? cpu + 1 : 0);
 	last_cpu = cpu;
 
-	cpumask_copy(irq_data_get_affinity_mask(data), cpumask_of(cpu));
+	irq_data_update_affinity(data, cpumask_of(cpu));
 	chip->irq_set_affinity(data, cpumask_of(cpu), false);
 	return 0;
 }
diff --git a/arch/alpha/kernel/irq_i8259.c b/arch/alpha/kernel/irq_i8259.c
index 1dcf0d9038fd..29c6c477ac35 100644
--- a/arch/alpha/kernel/irq_i8259.c
+++ b/arch/alpha/kernel/irq_i8259.c
@@ -98,10 +98,6 @@ init_i8259a_irqs(void)
 
 #if defined(CONFIG_ALPHA_GENERIC)
 # define IACK_SC	alpha_mv.iack_sc
-#elif defined(CONFIG_ALPHA_APECS)
-# define IACK_SC	APECS_IACK_SC
-#elif defined(CONFIG_ALPHA_LCA)
-# define IACK_SC	LCA_IACK_SC
 #elif defined(CONFIG_ALPHA_CIA)
 # define IACK_SC	CIA_IACK_SC
 #elif defined(CONFIG_ALPHA_PYXIS)
diff --git a/arch/alpha/kernel/machvec_impl.h b/arch/alpha/kernel/machvec_impl.h
index 393d5d6ca5d2..129ae36b8e6d 100644
--- a/arch/alpha/kernel/machvec_impl.h
+++ b/arch/alpha/kernel/machvec_impl.h
@@ -44,33 +44,14 @@
 
 #define DO_DEFAULT_RTC			.rtc_port = 0x70
 
-#define DO_EV4_MMU							\
-	.max_asn =			EV4_MAX_ASN,			\
-	.mv_switch_mm =			ev4_switch_mm,			\
-	.mv_activate_mm =		ev4_activate_mm,		\
-	.mv_flush_tlb_current =		ev4_flush_tlb_current,		\
-	.mv_flush_tlb_current_page =	ev4_flush_tlb_current_page
-
 #define DO_EV5_MMU							\
-	.max_asn =			EV5_MAX_ASN,			\
-	.mv_switch_mm =			ev5_switch_mm,			\
-	.mv_activate_mm =		ev5_activate_mm,		\
-	.mv_flush_tlb_current =		ev5_flush_tlb_current,		\
-	.mv_flush_tlb_current_page =	ev5_flush_tlb_current_page
+	.max_asn =			EV5_MAX_ASN			\
 
 #define DO_EV6_MMU							\
-	.max_asn =			EV6_MAX_ASN,			\
-	.mv_switch_mm =			ev5_switch_mm,			\
-	.mv_activate_mm =		ev5_activate_mm,		\
-	.mv_flush_tlb_current =		ev5_flush_tlb_current,		\
-	.mv_flush_tlb_current_page =	ev5_flush_tlb_current_page
+	.max_asn =			EV6_MAX_ASN			\
 
 #define DO_EV7_MMU							\
-	.max_asn =			EV6_MAX_ASN,			\
-	.mv_switch_mm =			ev5_switch_mm,			\
-	.mv_activate_mm =		ev5_activate_mm,		\
-	.mv_flush_tlb_current =		ev5_flush_tlb_current,		\
-	.mv_flush_tlb_current_page =	ev5_flush_tlb_current_page
+	.max_asn =			EV6_MAX_ASN			\
 
 #define IO_LITE(UP,low)							\
 	.hae_register =		(unsigned long *) CAT(UP,_HAE_ADDRESS),	\
@@ -78,9 +59,11 @@
 	.mv_ioread8 =		CAT(low,_ioread8),			\
 	.mv_ioread16 =		CAT(low,_ioread16),			\
 	.mv_ioread32 =		CAT(low,_ioread32),			\
+	.mv_ioread64 =		CAT(low,_ioread64),			\
 	.mv_iowrite8 =		CAT(low,_iowrite8),			\
 	.mv_iowrite16 =		CAT(low,_iowrite16),			\
 	.mv_iowrite32 =		CAT(low,_iowrite32),			\
+	.mv_iowrite64 =		CAT(low,_iowrite64),			\
 	.mv_readb =		CAT(low,_readb),			\
 	.mv_readw =		CAT(low,_readw),			\
 	.mv_readl =		CAT(low,_readl),			\
diff --git a/arch/alpha/kernel/module.c b/arch/alpha/kernel/module.c
index 5b60c248de9e..cbefa5a77384 100644
--- a/arch/alpha/kernel/module.c
+++ b/arch/alpha/kernel/module.c
@@ -146,10 +146,8 @@ apply_relocate_add(Elf64_Shdr *sechdrs, const char *strtab,
 	base = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr;
 	symtab = (Elf64_Sym *)sechdrs[symindex].sh_addr;
 
-	/* The small sections were sorted to the end of the segment.
-	   The following should definitely cover them.  */
-	gp = (u64)me->core_layout.base + me->core_layout.size - 0x8000;
 	got = sechdrs[me->arch.gotsecindex].sh_addr;
+	gp = got + 0x8000;
 
 	for (i = 0; i < n; i++) {
 		unsigned long r_sym = ELF64_R_SYM (rela[i].r_info);
diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c
index 8bbeebb73cf0..a08e8edef1a4 100644
--- a/arch/alpha/kernel/osf_sys.c
+++ b/arch/alpha/kernel/osf_sys.c
@@ -36,6 +36,7 @@
 #include <linux/types.h>
 #include <linux/ipc.h>
 #include <linux/namei.h>
+#include <linux/mount.h>
 #include <linux/uio.h>
 #include <linux/vfs.h>
 #include <linux/rcupdate.h>
@@ -96,7 +97,7 @@ struct osf_dirent {
 	unsigned int d_ino;
 	unsigned short d_reclen;
 	unsigned short d_namlen;
-	char d_name[1];
+	char d_name[];
 };
 
 struct osf_dirent_callback {
@@ -107,7 +108,7 @@ struct osf_dirent_callback {
 	int error;
 };
 
-static int
+static bool
 osf_filldir(struct dir_context *ctx, const char *name, int namlen,
 	    loff_t offset, u64 ino, unsigned int d_type)
 {
@@ -119,11 +120,11 @@ osf_filldir(struct dir_context *ctx, const char *name, int namlen,
 
 	buf->error = -EINVAL;	/* only used if we fail */
 	if (reclen > buf->count)
-		return -EINVAL;
+		return false;
 	d_ino = ino;
 	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) {
 		buf->error = -EOVERFLOW;
-		return -EOVERFLOW;
+		return false;
 	}
 	if (buf->basep) {
 		if (put_user(offset, buf->basep))
@@ -140,10 +141,10 @@ osf_filldir(struct dir_context *ctx, const char *name, int namlen,
 	dirent = (void __user *)dirent + reclen;
 	buf->dirent = dirent;
 	buf->count -= reclen;
-	return 0;
+	return true;
 Efault:
 	buf->error = -EFAULT;
-	return -EFAULT;
+	return false;
 }
 
 SYSCALL_DEFINE4(osf_getdirentries, unsigned int, fd,
@@ -151,7 +152,7 @@ SYSCALL_DEFINE4(osf_getdirentries, unsigned int, fd,
 		long __user *, basep)
 {
 	int error;
-	struct fd arg = fdget_pos(fd);
+	CLASS(fd_pos, arg)(fd);
 	struct osf_dirent_callback buf = {
 		.ctx.actor = osf_filldir,
 		.dirent = dirent,
@@ -159,16 +160,15 @@ SYSCALL_DEFINE4(osf_getdirentries, unsigned int, fd,
 		.count = count
 	};
 
-	if (!arg.file)
+	if (fd_empty(arg))
 		return -EBADF;
 
-	error = iterate_dir(arg.file, &buf.ctx);
+	error = iterate_dir(fd_file(arg), &buf.ctx);
 	if (error >= 0)
 		error = buf.error;
 	if (count != buf.count)
 		error = count - buf.count;
 
-	fdput_pos(arg);
 	return error;
 }
 
@@ -521,7 +521,7 @@ SYSCALL_DEFINE4(osf_mount, unsigned long, typenr, const char __user *, path,
 		break;
 	default:
 		retval = -EINVAL;
-		printk("osf_mount(%ld, %x)\n", typenr, flag);
+		printk_ratelimited("osf_mount(%ld, %x)\n", typenr, flag);
 	}
 
 	return retval;
@@ -1013,8 +1013,6 @@ SYSCALL_DEFINE2(osf_settimeofday, struct timeval32 __user *, tv,
 	return do_sys_settimeofday64(tv ? &kts : NULL, tz ? &ktz : NULL);
 }
 
-asmlinkage long sys_ni_posix_timers(void);
-
 SYSCALL_DEFINE2(osf_utimes, const char __user *, filename,
 		struct timeval32 __user *, tvs)
 {
@@ -1212,36 +1210,26 @@ SYSCALL_DEFINE1(old_adjtimex, struct timex32 __user *, txc_p)
 	return ret;
 }
 
-/* Get an address range which is currently unmapped.  Similar to the
-   generic version except that we know how to honor ADDR_LIMIT_32BIT.  */
+/* Get an address range which is currently unmapped. */
 
 static unsigned long
 arch_get_unmapped_area_1(unsigned long addr, unsigned long len,
 		         unsigned long limit)
 {
-	struct vm_unmapped_area_info info;
+	struct vm_unmapped_area_info info = {};
 
-	info.flags = 0;
 	info.length = len;
 	info.low_limit = addr;
 	info.high_limit = limit;
-	info.align_mask = 0;
-	info.align_offset = 0;
 	return vm_unmapped_area(&info);
 }
 
 unsigned long
 arch_get_unmapped_area(struct file *filp, unsigned long addr,
 		       unsigned long len, unsigned long pgoff,
-		       unsigned long flags)
+		       unsigned long flags, vm_flags_t vm_flags)
 {
-	unsigned long limit;
-
-	/* "32 bit" actually means 31 bit, since pointers sign extend.  */
-	if (current->personality & ADDR_LIMIT_32BIT)
-		limit = 0x80000000;
-	else
-		limit = TASK_SIZE;
+	unsigned long limit = TASK_SIZE;
 
 	if (len > limit)
 		return -ENOMEM;
@@ -1277,48 +1265,6 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
 	return addr;
 }
 
-#ifdef CONFIG_OSF4_COMPAT
-/* Clear top 32 bits of iov_len in the user's buffer for
-   compatibility with old versions of OSF/1 where iov_len
-   was defined as int. */
-static int
-osf_fix_iov_len(const struct iovec __user *iov, unsigned long count)
-{
-	unsigned long i;
-
-	for (i = 0 ; i < count ; i++) {
-		int __user *iov_len_high = (int __user *)&iov[i].iov_len + 1;
-
-		if (put_user(0, iov_len_high))
-			return -EFAULT;
-	}
-	return 0;
-}
-#endif
-
-SYSCALL_DEFINE3(osf_readv, unsigned long, fd,
-		const struct iovec __user *, vector, unsigned long, count)
-{
-#ifdef CONFIG_OSF4_COMPAT
-	if (unlikely(personality(current->personality) == PER_OSF4))
-		if (osf_fix_iov_len(vector, count))
-			return -EFAULT;
-#endif
-
-	return sys_readv(fd, vector, count);
-}
-
-SYSCALL_DEFINE3(osf_writev, unsigned long, fd,
-		const struct iovec __user *, vector, unsigned long, count)
-{
-#ifdef CONFIG_OSF4_COMPAT
-	if (unlikely(personality(current->personality) == PER_OSF4))
-		if (osf_fix_iov_len(vector, count))
-			return -EFAULT;
-#endif
-	return sys_writev(fd, vector, count);
-}
-
 SYSCALL_DEFINE2(osf_getpriority, int, which, int, who)
 {
 	int prio = sys_getpriority(which, who);
diff --git a/arch/alpha/kernel/pci-noop.c b/arch/alpha/kernel/pci-noop.c
deleted file mode 100644
index ae82061edae9..000000000000
--- a/arch/alpha/kernel/pci-noop.c
+++ /dev/null
@@ -1,113 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- *	linux/arch/alpha/kernel/pci-noop.c
- *
- * Stub PCI interfaces for Jensen-specific kernels.
- */
-
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/memblock.h>
-#include <linux/gfp.h>
-#include <linux/capability.h>
-#include <linux/mm.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/dma-mapping.h>
-#include <linux/scatterlist.h>
-#include <linux/syscalls.h>
-
-#include "proto.h"
-
-
-/*
- * The PCI controller list.
- */
-
-struct pci_controller *hose_head, **hose_tail = &hose_head;
-struct pci_controller *pci_isa_hose;
-
-
-struct pci_controller * __init
-alloc_pci_controller(void)
-{
-	struct pci_controller *hose;
-
-	hose = memblock_alloc(sizeof(*hose), SMP_CACHE_BYTES);
-	if (!hose)
-		panic("%s: Failed to allocate %zu bytes\n", __func__,
-		      sizeof(*hose));
-
-	*hose_tail = hose;
-	hose_tail = &hose->next;
-
-	return hose;
-}
-
-struct resource * __init
-alloc_resource(void)
-{
-	void *ptr = memblock_alloc(sizeof(struct resource), SMP_CACHE_BYTES);
-
-	if (!ptr)
-		panic("%s: Failed to allocate %zu bytes\n", __func__,
-		      sizeof(struct resource));
-
-	return ptr;
-}
-
-SYSCALL_DEFINE3(pciconfig_iobase, long, which, unsigned long, bus,
-		unsigned long, dfn)
-{
-	struct pci_controller *hose;
-
-	/* from hose or from bus.devfn */
-	if (which & IOBASE_FROM_HOSE) {
-		for (hose = hose_head; hose; hose = hose->next)
-			if (hose->index == bus)
-				break;
-		if (!hose)
-			return -ENODEV;
-	} else {
-		/* Special hook for ISA access.  */
-		if (bus == 0 && dfn == 0)
-			hose = pci_isa_hose;
-		else
-			return -ENODEV;
-	}
-
-	switch (which & ~IOBASE_FROM_HOSE) {
-	case IOBASE_HOSE:
-		return hose->index;
-	case IOBASE_SPARSE_MEM:
-		return hose->sparse_mem_base;
-	case IOBASE_DENSE_MEM:
-		return hose->dense_mem_base;
-	case IOBASE_SPARSE_IO:
-		return hose->sparse_io_base;
-	case IOBASE_DENSE_IO:
-		return hose->dense_io_base;
-	case IOBASE_ROOT_BUS:
-		return hose->bus->number;
-	}
-
-	return -EOPNOTSUPP;
-}
-
-SYSCALL_DEFINE5(pciconfig_read, unsigned long, bus, unsigned long, dfn,
-		unsigned long, off, unsigned long, len, void __user *, buf)
-{
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-	else
-		return -ENODEV;
-}
-
-SYSCALL_DEFINE5(pciconfig_write, unsigned long, bus, unsigned long, dfn,
-		unsigned long, off, unsigned long, len, void __user *, buf)
-{
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-	else
-		return -ENODEV;
-}
diff --git a/arch/alpha/kernel/pci-sysfs.c b/arch/alpha/kernel/pci-sysfs.c
index 5808a66e2a81..3048758304b5 100644
--- a/arch/alpha/kernel/pci-sysfs.c
+++ b/arch/alpha/kernel/pci-sysfs.c
@@ -64,7 +64,7 @@ static int __pci_mmap_fits(struct pci_dev *pdev, int num,
  * Return: %0 on success, negative error code otherwise
  */
 static int pci_mmap_resource(struct kobject *kobj,
-			     struct bin_attribute *attr,
+			     const struct bin_attribute *attr,
 			     struct vm_area_struct *vma, int sparse)
 {
 	struct pci_dev *pdev = to_pci_dev(kobj_to_dev(kobj));
@@ -93,14 +93,14 @@ static int pci_mmap_resource(struct kobject *kobj,
 }
 
 static int pci_mmap_resource_sparse(struct file *filp, struct kobject *kobj,
-				    struct bin_attribute *attr,
+				    const struct bin_attribute *attr,
 				    struct vm_area_struct *vma)
 {
 	return pci_mmap_resource(kobj, attr, vma, 1);
 }
 
 static int pci_mmap_resource_dense(struct file *filp, struct kobject *kobj,
-				   struct bin_attribute *attr,
+				   const struct bin_attribute *attr,
 				   struct vm_area_struct *vma)
 {
 	return pci_mmap_resource(kobj, attr, vma, 0);
diff --git a/arch/alpha/kernel/pci.c b/arch/alpha/kernel/pci.c
index 64fbfb0763b2..8e9b4ac86b7e 100644
--- a/arch/alpha/kernel/pci.c
+++ b/arch/alpha/kernel/pci.c
@@ -288,11 +288,10 @@ pcibios_claim_one_bus(struct pci_bus *b)
 	struct pci_bus *child_bus;
 
 	list_for_each_entry(dev, &b->devices, bus_list) {
+		struct resource *r;
 		int i;
 
-		for (i = 0; i < PCI_NUM_RESOURCES; i++) {
-			struct resource *r = &dev->resource[i];
-
+		pci_dev_for_each_resource(dev, r, i) {
 			if (r->parent || !r->start || !r->flags)
 				continue;
 			if (pci_has_flag(PCI_PROBE_ONLY) ||
@@ -392,10 +391,7 @@ alloc_pci_controller(void)
 {
 	struct pci_controller *hose;
 
-	hose = memblock_alloc(sizeof(*hose), SMP_CACHE_BYTES);
-	if (!hose)
-		panic("%s: Failed to allocate %zu bytes\n", __func__,
-		      sizeof(*hose));
+	hose = memblock_alloc_or_panic(sizeof(*hose), SMP_CACHE_BYTES);
 
 	*hose_tail = hose;
 	hose_tail = &hose->next;
@@ -406,13 +402,7 @@ alloc_pci_controller(void)
 struct resource * __init
 alloc_resource(void)
 {
-	void *ptr = memblock_alloc(sizeof(struct resource), SMP_CACHE_BYTES);
-
-	if (!ptr)
-		panic("%s: Failed to allocate %zu bytes\n", __func__,
-		      sizeof(struct resource));
-
-	return ptr;
+	return memblock_alloc_or_panic(sizeof(struct resource), SMP_CACHE_BYTES);
 }
 
 
diff --git a/arch/alpha/kernel/pci_impl.h b/arch/alpha/kernel/pci_impl.h
index 18043af45e2b..a16325ce21c4 100644
--- a/arch/alpha/kernel/pci_impl.h
+++ b/arch/alpha/kernel/pci_impl.h
@@ -143,9 +143,7 @@ struct pci_iommu_arena
 	unsigned int align_entry;
 };
 
-#if defined(CONFIG_ALPHA_SRM) && \
-    (defined(CONFIG_ALPHA_CIA) || defined(CONFIG_ALPHA_LCA) || \
-     defined(CONFIG_ALPHA_AVANTI))
+#if defined(CONFIG_ALPHA_SRM) && defined(CONFIG_ALPHA_CIA)
 # define NEED_SRM_SAVE_RESTORE
 #else
 # undef NEED_SRM_SAVE_RESTORE
diff --git a/arch/alpha/kernel/pci_iommu.c b/arch/alpha/kernel/pci_iommu.c
index 21f9ac101324..955b6ca61627 100644
--- a/arch/alpha/kernel/pci_iommu.c
+++ b/arch/alpha/kernel/pci_iommu.c
@@ -13,6 +13,7 @@
 #include <linux/log2.h>
 #include <linux/dma-map-ops.h>
 #include <linux/iommu-helper.h>
+#include <linux/string_choices.h>
 
 #include <asm/io.h>
 #include <asm/hwrpb.h>
@@ -71,14 +72,8 @@ iommu_arena_new_node(int nid, struct pci_controller *hose, dma_addr_t base,
 	if (align < mem_size)
 		align = mem_size;
 
-	arena = memblock_alloc(sizeof(*arena), SMP_CACHE_BYTES);
-	if (!arena)
-		panic("%s: Failed to allocate %zu bytes\n", __func__,
-		      sizeof(*arena));
-	arena->ptes = memblock_alloc(mem_size, align);
-	if (!arena->ptes)
-		panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
-		      __func__, mem_size, align);
+	arena = memblock_alloc_or_panic(sizeof(*arena), SMP_CACHE_BYTES);
+	arena->ptes = memblock_alloc_or_panic(mem_size, align);
 
 	spin_lock_init(&arena->lock);
 	arena->hose = hose;
@@ -127,10 +122,12 @@ again:
 			goto again;
 		}
 
-		if (ptes[p+i])
-			p = ALIGN(p + i + 1, mask + 1), i = 0;
-		else
+		if (ptes[p+i]) {
+			p = ALIGN(p + i + 1, mask + 1);
+			i = 0;
+		} else {
 			i = i + 1;
+		}
 	}
 
 	if (i < n) {
@@ -216,7 +213,7 @@ static int pci_dac_dma_supported(struct pci_dev *dev, u64 mask)
 
 	/* If both conditions above are met, we are fine. */
 	DBGA("pci_dac_dma_supported %s from %ps\n",
-	     ok ? "yes" : "no", __builtin_return_address(0));
+	     str_yes_no(ok), __builtin_return_address(0));
 
 	return ok;
 }
@@ -227,28 +224,26 @@ static int pci_dac_dma_supported(struct pci_dev *dev, u64 mask)
    until either pci_unmap_single or pci_dma_sync_single is performed.  */
 
 static dma_addr_t
-pci_map_single_1(struct pci_dev *pdev, void *cpu_addr, size_t size,
+pci_map_single_1(struct pci_dev *pdev, phys_addr_t paddr, size_t size,
 		 int dac_allowed)
 {
 	struct pci_controller *hose = pdev ? pdev->sysdata : pci_isa_hose;
 	dma_addr_t max_dma = pdev ? pdev->dma_mask : ISA_DMA_MASK;
+	unsigned long offset = offset_in_page(paddr);
 	struct pci_iommu_arena *arena;
 	long npages, dma_ofs, i;
-	unsigned long paddr;
 	dma_addr_t ret;
 	unsigned int align = 0;
 	struct device *dev = pdev ? &pdev->dev : NULL;
 
-	paddr = __pa(cpu_addr);
-
 #if !DEBUG_NODIRECT
 	/* First check to see if we can use the direct map window.  */
 	if (paddr + size + __direct_map_base - 1 <= max_dma
 	    && paddr + size <= __direct_map_size) {
 		ret = paddr + __direct_map_base;
 
-		DBGA2("pci_map_single: [%p,%zx] -> direct %llx from %ps\n",
-		      cpu_addr, size, ret, __builtin_return_address(0));
+		DBGA2("pci_map_single: [%pa,%zx] -> direct %llx from %ps\n",
+		      &paddr, size, ret, __builtin_return_address(0));
 
 		return ret;
 	}
@@ -258,8 +253,8 @@ pci_map_single_1(struct pci_dev *pdev, void *cpu_addr, size_t size,
 	if (dac_allowed) {
 		ret = paddr + alpha_mv.pci_dac_offset;
 
-		DBGA2("pci_map_single: [%p,%zx] -> DAC %llx from %ps\n",
-		      cpu_addr, size, ret, __builtin_return_address(0));
+		DBGA2("pci_map_single: [%pa,%zx] -> DAC %llx from %ps\n",
+		      &paddr, size, ret, __builtin_return_address(0));
 
 		return ret;
 	}
@@ -293,10 +288,10 @@ pci_map_single_1(struct pci_dev *pdev, void *cpu_addr, size_t size,
 		arena->ptes[i + dma_ofs] = mk_iommu_pte(paddr);
 
 	ret = arena->dma_base + dma_ofs * PAGE_SIZE;
-	ret += (unsigned long)cpu_addr & ~PAGE_MASK;
+	ret += offset;
 
-	DBGA2("pci_map_single: [%p,%zx] np %ld -> sg %llx from %ps\n",
-	      cpu_addr, size, npages, ret, __builtin_return_address(0));
+	DBGA2("pci_map_single: [%pa,%zx] np %ld -> sg %llx from %ps\n",
+	      &paddr, size, npages, ret, __builtin_return_address(0));
 
 	return ret;
 }
@@ -325,19 +320,18 @@ static struct pci_dev *alpha_gendev_to_pci(struct device *dev)
 	return NULL;
 }
 
-static dma_addr_t alpha_pci_map_page(struct device *dev, struct page *page,
-				     unsigned long offset, size_t size,
-				     enum dma_data_direction dir,
+static dma_addr_t alpha_pci_map_phys(struct device *dev, phys_addr_t phys,
+				     size_t size, enum dma_data_direction dir,
 				     unsigned long attrs)
 {
 	struct pci_dev *pdev = alpha_gendev_to_pci(dev);
 	int dac_allowed;
 
-	BUG_ON(dir == PCI_DMA_NONE);
+	if (unlikely(attrs & DMA_ATTR_MMIO))
+		return DMA_MAPPING_ERROR;
 
-	dac_allowed = pdev ? pci_dac_dma_supported(pdev, pdev->dma_mask) : 0; 
-	return pci_map_single_1(pdev, (char *)page_address(page) + offset, 
-				size, dac_allowed);
+	dac_allowed = pdev ? pci_dac_dma_supported(pdev, pdev->dma_mask) : 0;
+	return pci_map_single_1(pdev, phys, size, dac_allowed);
 }
 
 /* Unmap a single streaming mode DMA translation.  The DMA_ADDR and
@@ -346,7 +340,7 @@ static dma_addr_t alpha_pci_map_page(struct device *dev, struct page *page,
    the cpu to the buffer are guaranteed to see whatever the device
    wrote there.  */
 
-static void alpha_pci_unmap_page(struct device *dev, dma_addr_t dma_addr,
+static void alpha_pci_unmap_phys(struct device *dev, dma_addr_t dma_addr,
 				 size_t size, enum dma_data_direction dir,
 				 unsigned long attrs)
 {
@@ -356,8 +350,6 @@ static void alpha_pci_unmap_page(struct device *dev, dma_addr_t dma_addr,
 	struct pci_iommu_arena *arena;
 	long dma_ofs, npages;
 
-	BUG_ON(dir == PCI_DMA_NONE);
-
 	if (dma_addr >= __direct_map_base
 	    && dma_addr < __direct_map_base + __direct_map_size) {
 		/* Nothing to do.  */
@@ -432,7 +424,7 @@ try_again:
 	}
 	memset(cpu_addr, 0, size);
 
-	*dma_addrp = pci_map_single_1(pdev, cpu_addr, size, 0);
+	*dma_addrp = pci_map_single_1(pdev, virt_to_phys(cpu_addr), size, 0);
 	if (*dma_addrp == DMA_MAPPING_ERROR) {
 		free_pages((unsigned long)cpu_addr, order);
 		if (alpha_mv.mv_pci_tbi || (gfp & GFP_DMA))
@@ -460,7 +452,7 @@ static void alpha_pci_free_coherent(struct device *dev, size_t size,
 				    unsigned long attrs)
 {
 	struct pci_dev *pdev = alpha_gendev_to_pci(dev);
-	pci_unmap_single(pdev, dma_addr, size, PCI_DMA_BIDIRECTIONAL);
+	dma_unmap_single(&pdev->dev, dma_addr, size, DMA_BIDIRECTIONAL);
 	free_pages((unsigned long)cpu_addr, get_order(size));
 
 	DBGA2("pci_free_consistent: [%llx,%zx] from %ps\n",
@@ -639,16 +631,15 @@ static int alpha_pci_map_sg(struct device *dev, struct scatterlist *sg,
 	dma_addr_t max_dma;
 	int dac_allowed;
 
-	BUG_ON(dir == PCI_DMA_NONE);
+	BUG_ON(dir == DMA_NONE);
 
 	dac_allowed = dev ? pci_dac_dma_supported(pdev, pdev->dma_mask) : 0;
 
 	/* Fast path single entry scatterlists.  */
 	if (nents == 1) {
 		sg->dma_length = sg->length;
-		sg->dma_address
-		  = pci_map_single_1(pdev, SG_ENT_VIRT_ADDRESS(sg),
-				     sg->length, dac_allowed);
+		sg->dma_address = pci_map_single_1(pdev, sg_phys(sg),
+						   sg->length, dac_allowed);
 		if (sg->dma_address == DMA_MAPPING_ERROR)
 			return -EIO;
 		return 1;
@@ -702,7 +693,7 @@ static int alpha_pci_map_sg(struct device *dev, struct scatterlist *sg,
 	/* Some allocation failed while mapping the scatterlist
 	   entries.  Unmap them now.  */
 	if (out > start)
-		pci_unmap_sg(pdev, start, out - start, dir);
+		dma_unmap_sg(&pdev->dev, start, out - start, dir);
 	return -ENOMEM;
 }
 
@@ -722,7 +713,7 @@ static void alpha_pci_unmap_sg(struct device *dev, struct scatterlist *sg,
 	dma_addr_t max_dma;
 	dma_addr_t fbeg, fend;
 
-	BUG_ON(dir == PCI_DMA_NONE);
+	BUG_ON(dir == DMA_NONE);
 
 	if (! alpha_mv.mv_pci_tbi)
 		return;
@@ -920,14 +911,14 @@ iommu_unbind(struct pci_iommu_arena *arena, long pg_start, long pg_count)
 const struct dma_map_ops alpha_pci_ops = {
 	.alloc			= alpha_pci_alloc_coherent,
 	.free			= alpha_pci_free_coherent,
-	.map_page		= alpha_pci_map_page,
-	.unmap_page		= alpha_pci_unmap_page,
+	.map_phys		= alpha_pci_map_phys,
+	.unmap_phys		= alpha_pci_unmap_phys,
 	.map_sg			= alpha_pci_map_sg,
 	.unmap_sg		= alpha_pci_unmap_sg,
 	.dma_supported		= alpha_pci_supported,
 	.mmap			= dma_common_mmap,
 	.get_sgtable		= dma_common_get_sgtable,
-	.alloc_pages		= dma_common_alloc_pages,
+	.alloc_pages_op		= dma_common_alloc_pages,
 	.free_pages		= dma_common_free_pages,
 };
 EXPORT_SYMBOL(alpha_pci_ops);
diff --git a/arch/alpha/kernel/perf_event.c b/arch/alpha/kernel/perf_event.c
index efcf7321701b..a3eaab094ece 100644
--- a/arch/alpha/kernel/perf_event.c
+++ b/arch/alpha/kernel/perf_event.c
@@ -689,8 +689,6 @@ static int __hw_perf_event_init(struct perf_event *event)
  */
 static int alpha_pmu_event_init(struct perf_event *event)
 {
-	int err;
-
 	/* does not support taken branch sampling */
 	if (has_branch_stack(event))
 		return -EOPNOTSUPP;
@@ -709,9 +707,7 @@ static int alpha_pmu_event_init(struct perf_event *event)
 		return -ENODEV;
 
 	/* Do the real initialisation work. */
-	err = __hw_perf_event_init(event);
-
-	return err;
+	return __hw_perf_event_init(event);
 }
 
 /*
@@ -856,14 +852,9 @@ static void alpha_perf_event_irq_handler(unsigned long la_ptr,
 	alpha_perf_event_update(event, hwc, idx, alpha_pmu->pmc_max_period[idx]+1);
 	perf_sample_data_init(&data, 0, hwc->last_period);
 
-	if (alpha_perf_event_set_period(event, hwc, idx)) {
-		if (perf_event_overflow(event, &data, regs)) {
-			/* Interrupts coming too quickly; "throttle" the
-			 * counter, i.e., disable it for a little while.
-			 */
-			alpha_pmu_stop(event, 0);
-		}
-	}
+	if (alpha_perf_event_set_period(event, hwc, idx))
+		perf_event_overflow(event, &data, regs);
+
 	wrperfmon(PERFMON_CMD_ENABLE, cpuc->idx_mask);
 
 	return;
@@ -874,7 +865,7 @@ static void alpha_perf_event_irq_handler(unsigned long la_ptr,
 /*
  * Init call to initialise performance events at kernel startup.
  */
-int __init init_hw_perf_events(void)
+static int __init init_hw_perf_events(void)
 {
 	pr_info("Performance events: ");
 
diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c
index a5123ea426ce..06522451f018 100644
--- a/arch/alpha/kernel/process.c
+++ b/arch/alpha/kernel/process.c
@@ -9,6 +9,7 @@
  * This file handles the architecture-dependent parts of process handling.
  */
 
+#include <linux/cpu.h>
 #include <linux/errno.h>
 #include <linux/module.h>
 #include <linux/sched.h>
@@ -57,12 +58,12 @@ EXPORT_SYMBOL(pm_power_off);
 void arch_cpu_idle(void)
 {
 	wtint(0);
-	raw_local_irq_enable();
 }
 
-void arch_cpu_idle_dead(void)
+void __noreturn arch_cpu_idle_dead(void)
 {
 	wtint(INT_MAX);
+	BUG();
 }
 #endif /* ALPHA_WTINT */
 
@@ -74,7 +75,7 @@ struct halt_info {
 static void
 common_shutdown_1(void *generic_ptr)
 {
-	struct halt_info *how = (struct halt_info *)generic_ptr;
+	struct halt_info *how = generic_ptr;
 	struct percpu_struct *cpup;
 	unsigned long *pflags, flags;
 	int cpuid = smp_processor_id();
@@ -125,7 +126,7 @@ common_shutdown_1(void *generic_ptr)
 	/* Wait for the secondaries to halt. */
 	set_cpu_present(boot_cpuid, false);
 	set_cpu_possible(boot_cpuid, false);
-	while (cpumask_weight(cpu_present_mask))
+	while (!cpumask_empty(cpu_present_mask))
 		barrier();
 #endif
 
@@ -134,7 +135,7 @@ common_shutdown_1(void *generic_ptr)
 #ifdef CONFIG_DUMMY_CONSOLE
 		/* If we've gotten here after SysRq-b, leave interrupt
 		   context before taking over the console. */
-		if (in_irq())
+		if (in_hardirq())
 			irq_exit();
 		/* This has the effect of resetting the VGA video origin.  */
 		console_lock();
@@ -225,18 +226,14 @@ flush_thread(void)
 	current_thread_info()->pcb.unique = 0;
 }
 
-void
-release_thread(struct task_struct *dead_task)
-{
-}
-
 /*
  * Copy architecture-specific thread state
  */
-int copy_thread(unsigned long clone_flags, unsigned long usp,
-		unsigned long kthread_arg, struct task_struct *p,
-		unsigned long tls)
+int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 {
+	u64 clone_flags = args->flags;
+	unsigned long usp = args->stack;
+	unsigned long tls = args->tls;
 	extern void ret_from_fork(void);
 	extern void ret_from_kernel_thread(void);
 
@@ -248,15 +245,17 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 	childstack = ((struct switch_stack *) childregs) - 1;
 	childti->pcb.ksp = (unsigned long) childstack;
 	childti->pcb.flags = 1;	/* set FEN, clear everything else */
+	childti->status |= TS_SAVED_FP | TS_RESTORE_FP;
 
-	if (unlikely(p->flags & (PF_KTHREAD | PF_IO_WORKER))) {
+	if (unlikely(args->fn)) {
 		/* kernel thread */
 		memset(childstack, 0,
 			sizeof(struct switch_stack) + sizeof(struct pt_regs));
 		childstack->r26 = (unsigned long) ret_from_kernel_thread;
-		childstack->r9 = usp;	/* function */
-		childstack->r10 = kthread_arg;
+		childstack->r9 = (unsigned long) args->fn;
+		childstack->r10 = (unsigned long) args->fn_arg;
 		childregs->hae = alpha_mv.hae_cache;
+		memset(childti->fp, '\0', sizeof(childti->fp));
 		childti->pcb.usp = 0;
 		return 0;
 	}
@@ -337,14 +336,11 @@ dump_elf_task(elf_greg_t *dest, struct task_struct *task)
 }
 EXPORT_SYMBOL(dump_elf_task);
 
-int
-dump_elf_task_fp(elf_fpreg_t *dest, struct task_struct *task)
+int elf_core_copy_task_fpregs(struct task_struct *t, elf_fpregset_t *fpu)
 {
-	struct switch_stack *sw = (struct switch_stack *)task_pt_regs(task) - 1;
-	memcpy(dest, sw->fp, 32 * 8);
+	memcpy(fpu, task_thread_info(t)->fp, 32 * 8);
 	return 1;
 }
-EXPORT_SYMBOL(dump_elf_task_fp);
 
 /*
  * Return saved PC of a blocked thread.  This assumes the frame
@@ -376,12 +372,11 @@ thread_saved_pc(struct task_struct *t)
 }
 
 unsigned long
-get_wchan(struct task_struct *p)
+__get_wchan(struct task_struct *p)
 {
 	unsigned long schedule_frame;
 	unsigned long pc;
-	if (!p || p == current || task_is_running(p))
-		return 0;
+
 	/*
 	 * This one depends on the frame size of schedule().  Do a
 	 * "disass schedule" in gdb to find the frame size.  Also, the
diff --git a/arch/alpha/kernel/proto.h b/arch/alpha/kernel/proto.h
index 5816a31c1b38..a8bc3ead776b 100644
--- a/arch/alpha/kernel/proto.h
+++ b/arch/alpha/kernel/proto.h
@@ -1,5 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 #include <linux/interrupt.h>
+#include <linux/screen_info.h>
 #include <linux/io.h>
 
 /* Prototypes of functions used across modules here in this directory.  */
@@ -14,13 +15,7 @@ struct pt_regs;
 struct task_struct;
 struct pci_dev;
 struct pci_controller;
-
-/* core_apecs.c */
-extern struct pci_ops apecs_pci_ops;
-extern void apecs_init_arch(void);
-extern void apecs_pci_clr_err(void);
-extern void apecs_machine_check(unsigned long vector, unsigned long la_ptr);
-extern void apecs_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
+struct pci_bus;
 
 /* core_cia.c */
 extern struct pci_ops cia_pci_ops;
@@ -37,12 +32,6 @@ extern int irongate_pci_clr_err(void);
 extern void irongate_init_arch(void);
 #define irongate_pci_tbi ((void *)0)
 
-/* core_lca.c */
-extern struct pci_ops lca_pci_ops;
-extern void lca_init_arch(void);
-extern void lca_machine_check(unsigned long vector, unsigned long la_ptr);
-extern void lca_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
-
 /* core_marvel.c */
 extern struct pci_ops marvel_pci_ops;
 extern void marvel_init_arch(void);
@@ -113,6 +102,10 @@ extern int boot_cpuid;
 #ifdef CONFIG_VERBOSE_MCHECK
 extern unsigned long alpha_verbose_mcheck;
 #endif
+#ifdef CONFIG_BLK_DEV_INITRD
+extern void * __init move_initrd(unsigned long);
+#endif
+extern struct screen_info vgacon_screen_info;
 
 /* srmcons.c */
 #if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_SRM)
@@ -126,6 +119,7 @@ extern void unregister_srm_console(void);
 /* smp.c */
 extern void setup_smp(void);
 extern void handle_ipi(struct pt_regs *);
+extern void __init smp_callin(void);
 
 /* bios32.c */
 /* extern void reset_for_srm(void); */
@@ -137,13 +131,13 @@ extern void common_init_rtc(void);
 extern unsigned long est_cycle_freq;
 
 /* smc37c93x.c */
-extern void SMC93x_Init(void);
+extern int __init SMC93x_Init(void);
 
 /* smc37c669.c */
-extern void SMC669_Init(int);
+extern void __init SMC669_Init(int);
 
 /* es1888.c */
-extern void es1888_init(void);
+extern void __init es1888_init(void);
 
 /* ../lib/fpreg.c */
 extern void alpha_write_fp_reg (unsigned long reg, unsigned long val);
@@ -164,19 +158,37 @@ extern void entSys(void);
 extern void entUna(void);
 extern void entDbg(void);
 
+/* pci.c */
+extern void pcibios_claim_one_bus(struct pci_bus *);
+
 /* ptrace.c */
 extern int ptrace_set_bpt (struct task_struct *child);
 extern int ptrace_cancel_bpt (struct task_struct *child);
+extern void syscall_trace_leave(void);
+extern unsigned long syscall_trace_enter(void);
+
+/* signal.c */
+struct sigcontext;
+extern void do_sigreturn(struct sigcontext __user *);
+struct rt_sigframe;
+extern void do_rt_sigreturn(struct rt_sigframe __user *);
+extern void do_work_pending(struct pt_regs *, unsigned long, unsigned long, unsigned long);
 
 /* traps.c */
 extern void dik_show_regs(struct pt_regs *regs, unsigned long *r9_15);
 extern void die_if_kernel(char *, struct pt_regs *, long, unsigned long *);
+extern void do_entInt(unsigned long, unsigned long, unsigned long, struct pt_regs *);
+extern void do_entArith(unsigned long, unsigned long, struct pt_regs *);
+extern void do_entIF(unsigned long, struct pt_regs *);
+extern void do_entDbg(struct pt_regs *);
+struct allregs;
+extern void do_entUna(void *, unsigned long, unsigned long, struct allregs *);
+extern void do_entUnaUser(void __user *, unsigned long, unsigned long, struct pt_regs *);
 
 /* sys_titan.c */
 extern void titan_dispatch_irqs(u64);
 
 /* ../mm/init.c */
-extern void switch_to_system_map(void);
 extern void srm_paging_stop(void);
 
 static inline int
diff --git a/arch/alpha/kernel/ptrace.c b/arch/alpha/kernel/ptrace.c
index 8c43212ae38e..fde4c68e7a0b 100644
--- a/arch/alpha/kernel/ptrace.c
+++ b/arch/alpha/kernel/ptrace.c
@@ -15,7 +15,6 @@
 #include <linux/user.h>
 #include <linux/security.h>
 #include <linux/signal.h>
-#include <linux/tracehook.h>
 #include <linux/audit.h>
 
 #include <linux/uaccess.h>
@@ -79,6 +78,8 @@ enum {
  (PAGE_SIZE*2 - sizeof(struct pt_regs) - sizeof(struct switch_stack) \
   + offsetof(struct switch_stack, reg))
 
+#define FP_REG(reg) (offsetof(struct thread_info, reg))
+
 static int regoff[] = {
 	PT_REG(	   r0), PT_REG(	   r1), PT_REG(	   r2), PT_REG(	  r3),
 	PT_REG(	   r4), PT_REG(	   r5), PT_REG(	   r6), PT_REG(	  r7),
@@ -88,14 +89,14 @@ static int regoff[] = {
 	PT_REG(	  r20), PT_REG(	  r21), PT_REG(	  r22), PT_REG(	 r23),
 	PT_REG(	  r24), PT_REG(	  r25), PT_REG(	  r26), PT_REG(	 r27),
 	PT_REG(	  r28), PT_REG(	   gp),		   -1,		   -1,
-	SW_REG(fp[ 0]), SW_REG(fp[ 1]), SW_REG(fp[ 2]), SW_REG(fp[ 3]),
-	SW_REG(fp[ 4]), SW_REG(fp[ 5]), SW_REG(fp[ 6]), SW_REG(fp[ 7]),
-	SW_REG(fp[ 8]), SW_REG(fp[ 9]), SW_REG(fp[10]), SW_REG(fp[11]),
-	SW_REG(fp[12]), SW_REG(fp[13]), SW_REG(fp[14]), SW_REG(fp[15]),
-	SW_REG(fp[16]), SW_REG(fp[17]), SW_REG(fp[18]), SW_REG(fp[19]),
-	SW_REG(fp[20]), SW_REG(fp[21]), SW_REG(fp[22]), SW_REG(fp[23]),
-	SW_REG(fp[24]), SW_REG(fp[25]), SW_REG(fp[26]), SW_REG(fp[27]),
-	SW_REG(fp[28]), SW_REG(fp[29]), SW_REG(fp[30]), SW_REG(fp[31]),
+	FP_REG(fp[ 0]), FP_REG(fp[ 1]), FP_REG(fp[ 2]), FP_REG(fp[ 3]),
+	FP_REG(fp[ 4]), FP_REG(fp[ 5]), FP_REG(fp[ 6]), FP_REG(fp[ 7]),
+	FP_REG(fp[ 8]), FP_REG(fp[ 9]), FP_REG(fp[10]), FP_REG(fp[11]),
+	FP_REG(fp[12]), FP_REG(fp[13]), FP_REG(fp[14]), FP_REG(fp[15]),
+	FP_REG(fp[16]), FP_REG(fp[17]), FP_REG(fp[18]), FP_REG(fp[19]),
+	FP_REG(fp[20]), FP_REG(fp[21]), FP_REG(fp[22]), FP_REG(fp[23]),
+	FP_REG(fp[24]), FP_REG(fp[25]), FP_REG(fp[26]), FP_REG(fp[27]),
+	FP_REG(fp[28]), FP_REG(fp[29]), FP_REG(fp[30]), FP_REG(fp[31]),
 	PT_REG(	   pc)
 };
 
@@ -323,7 +324,7 @@ asmlinkage unsigned long syscall_trace_enter(void)
 	unsigned long ret = 0;
 	struct pt_regs *regs = current_pt_regs();
 	if (test_thread_flag(TIF_SYSCALL_TRACE) &&
-	    tracehook_report_syscall_entry(current_pt_regs()))
+	    ptrace_report_syscall_entry(current_pt_regs()))
 		ret = -1UL;
 	audit_syscall_entry(regs->r0, regs->r16, regs->r17, regs->r18, regs->r19);
 	return ret ?: current_pt_regs()->r0;
@@ -334,5 +335,5 @@ syscall_trace_leave(void)
 {
 	audit_syscall_exit(current_pt_regs());
 	if (test_thread_flag(TIF_SYSCALL_TRACE))
-		tracehook_report_syscall_exit(current_pt_regs(), 0);
+		ptrace_report_syscall_exit(current_pt_regs(), 0);
 }
diff --git a/arch/alpha/kernel/rtc.c b/arch/alpha/kernel/rtc.c
index ce3077946e1d..cfdf90bc8b3f 100644
--- a/arch/alpha/kernel/rtc.c
+++ b/arch/alpha/kernel/rtc.c
@@ -80,7 +80,12 @@ init_rtc_epoch(void)
 static int
 alpha_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
-	mc146818_get_time(tm);
+	int ret = mc146818_get_time(tm, 10);
+
+	if (ret < 0) {
+		dev_err_ratelimited(dev, "unable to read current time\n");
+		return ret;
+	}
 
 	/* Adjust for non-default epochs.  It's easier to depend on the
 	   generic __get_rtc_time and adjust the epoch here than create
diff --git a/arch/alpha/kernel/setup.c b/arch/alpha/kernel/setup.c
index b4fbbba30aa2..bebdffafaee8 100644
--- a/arch/alpha/kernel/setup.c
+++ b/arch/alpha/kernel/setup.c
@@ -131,13 +131,14 @@ static void determine_cpu_caches (unsigned int);
 
 static char __initdata command_line[COMMAND_LINE_SIZE];
 
+#ifdef CONFIG_VGA_CONSOLE
 /*
  * The format of "screen_info" is strange, and due to early
  * i386-setup code. This is just enough to make the console
  * code think we're on a VGA color display.
  */
 
-struct screen_info screen_info = {
+struct screen_info vgacon_screen_info = {
 	.orig_x = 0,
 	.orig_y = 25,
 	.orig_video_cols = 80,
@@ -145,8 +146,7 @@ struct screen_info screen_info = {
 	.orig_video_isVGA = 1,
 	.orig_video_points = 16
 };
-
-EXPORT_SYMBOL(screen_info);
+#endif
 
 /*
  * The direct map I/O window, if any.  This should be the same
@@ -171,35 +171,22 @@ EXPORT_SYMBOL(__direct_map_size);
 	asm(".weak "#X)
 
 WEAK(alcor_mv);
-WEAK(alphabook1_mv);
-WEAK(avanti_mv);
-WEAK(cabriolet_mv);
 WEAK(clipper_mv);
 WEAK(dp264_mv);
 WEAK(eb164_mv);
-WEAK(eb64p_mv);
-WEAK(eb66_mv);
-WEAK(eb66p_mv);
 WEAK(eiger_mv);
-WEAK(jensen_mv);
 WEAK(lx164_mv);
-WEAK(lynx_mv);
 WEAK(marvel_ev7_mv);
 WEAK(miata_mv);
-WEAK(mikasa_mv);
 WEAK(mikasa_primo_mv);
 WEAK(monet_mv);
 WEAK(nautilus_mv);
-WEAK(noname_mv);
-WEAK(noritake_mv);
 WEAK(noritake_primo_mv);
-WEAK(p2k_mv);
 WEAK(pc164_mv);
 WEAK(privateer_mv);
 WEAK(rawhide_mv);
 WEAK(ruffian_mv);
 WEAK(rx164_mv);
-WEAK(sable_mv);
 WEAK(sable_gamma_mv);
 WEAK(shark_mv);
 WEAK(sx164_mv);
@@ -207,7 +194,6 @@ WEAK(takara_mv);
 WEAK(titan_mv);
 WEAK(webbrick_mv);
 WEAK(wildfire_mv);
-WEAK(xl_mv);
 WEAK(xlt_mv);
 
 #undef WEAK
@@ -224,7 +210,7 @@ static void __init
 reserve_std_resources(void)
 {
 	static struct resource standard_io_resources[] = {
-		{ .name = "rtc", .start = -1, .end = -1 },
+		{ .name = "rtc", .start = 0x70, .end =  0x7f},
         	{ .name = "dma1", .start = 0x00, .end = 0x1f },
         	{ .name = "pic1", .start = 0x20, .end = 0x3f },
         	{ .name = "timer", .start = 0x40, .end = 0x5f },
@@ -246,10 +232,6 @@ reserve_std_resources(void)
 			}
 	}
 
-	/* Fix up for the Jensen's queer RTC placement.  */
-	standard_io_resources[0].start = RTC_PORT(0);
-	standard_io_resources[0].end = RTC_PORT(0) + 0x0f;
-
 	for (i = 0; i < ARRAY_SIZE(standard_io_resources); ++i)
 		request_resource(io, standard_io_resources+i);
 }
@@ -385,8 +367,7 @@ setup_memory(void *kernel_end)
 #endif /* CONFIG_BLK_DEV_INITRD */
 }
 
-int __init
-page_is_ram(unsigned long pfn)
+int page_is_ram(unsigned long pfn)
 {
 	struct memclust_struct * cluster;
 	struct memdesc_struct * memdesc;
@@ -422,7 +403,7 @@ register_cpus(void)
 arch_initcall(register_cpus);
 
 #ifdef CONFIG_MAGIC_SYSRQ
-static void sysrq_reboot_handler(int unused)
+static void sysrq_reboot_handler(u8 unused)
 {
 	machine_halt();
 }
@@ -487,14 +468,7 @@ setup_arch(char **cmdline_p)
 	/* 
 	 * Locate the command line.
 	 */
-	/* Hack for Jensen... since we're restricted to 8 or 16 chars for
-	   boot flags depending on the boot mode, we need some shorthand.
-	   This should do for installation.  */
-	if (strcmp(COMMAND_LINE, "INSTALL") == 0) {
-		strlcpy(command_line, "root=/dev/fd0 load_ramdisk=1", sizeof command_line);
-	} else {
-		strlcpy(command_line, COMMAND_LINE, sizeof command_line);
-	}
+	strscpy(command_line, COMMAND_LINE, sizeof(command_line));
 	strcpy(boot_command_line, command_line);
 	*cmdline_p = command_line;
 
@@ -653,12 +627,12 @@ setup_arch(char **cmdline_p)
 
 #ifdef CONFIG_VT
 #if defined(CONFIG_VGA_CONSOLE)
-	conswitchp = &vga_con;
+	vgacon_register_screen(&vgacon_screen_info);
 #endif
 #endif
 
 	/* Default root filesystem to sda2.  */
-	ROOT_DEV = Root_SDA2;
+	ROOT_DEV = MKDEV(SCSI_DISK0_MAJOR, 2);
 
 #ifdef CONFIG_EISA
 	/* FIXME:  only set this when we actually have EISA in this box? */
@@ -707,12 +681,6 @@ static int eb164_indices[] = {0,0,0,1,1,1,1,1,2,2,2,2,3,3,3,3,4};
 static char alcor_names[][16] = {"Alcor", "Maverick", "Bret"};
 static int alcor_indices[] = {0,0,0,1,1,1,0,0,0,0,0,0,2,2,2,2,2,2};
 
-static char eb64p_names[][16] = {"EB64+", "Cabriolet", "AlphaPCI64"};
-static int eb64p_indices[] = {0,0,1,2};
-
-static char eb66_names[][8] = {"EB66", "EB66+"};
-static int eb66_indices[] = {0,0,1};
-
 static char marvel_names[][16] = {
 	"Marvel/EV7"
 };
@@ -746,26 +714,26 @@ get_sysvec(unsigned long type, unsigned long variation, unsigned long cpu)
 		NULL,		/* Ruby */
 		NULL,		/* Flamingo */
 		NULL,		/* Mannequin */
-		&jensen_mv,
+		NULL,		/* Jensens */
 		NULL, 		/* Pelican */
 		NULL,		/* Morgan */
 		NULL,		/* Sable -- see below.  */
 		NULL,		/* Medulla */
-		&noname_mv,
+		NULL,		/* Noname */
 		NULL,		/* Turbolaser */
-		&avanti_mv,
+		NULL,		/* Avanti */
 		NULL,		/* Mustang */
 		NULL,		/* Alcor, Bret, Maverick. HWRPB inaccurate? */
 		NULL,		/* Tradewind */
 		NULL,		/* Mikasa -- see below.  */
 		NULL,		/* EB64 */
-		NULL,		/* EB66 -- see variation.  */
-		NULL,		/* EB64+ -- see variation.  */
-		&alphabook1_mv,
+		NULL,		/* EB66 */
+		NULL,		/* EB64+ */
+		NULL,		/* Alphabook1 */
 		&rawhide_mv,
 		NULL,		/* K2 */
-		&lynx_mv,	/* Lynx */
-		&xl_mv,
+		NULL,		/* Lynx */
+		NULL,		/* XL */
 		NULL,		/* EB164 -- see variation.  */
 		NULL,		/* Noritake -- see below.  */
 		NULL,		/* Cortex */
@@ -804,19 +772,6 @@ get_sysvec(unsigned long type, unsigned long variation, unsigned long cpu)
 		&eb164_mv, &pc164_mv, &lx164_mv, &sx164_mv, &rx164_mv
 	};
 
-	static struct alpha_machine_vector *eb64p_vecs[] __initdata =
-	{
-		&eb64p_mv,
-		&cabriolet_mv,
-		&cabriolet_mv		/* AlphaPCI64 */
-	};
-
-	static struct alpha_machine_vector *eb66_vecs[] __initdata =
-	{
-		&eb66_mv,
-		&eb66p_mv
-	};
-
 	static struct alpha_machine_vector *marvel_vecs[] __initdata =
 	{
 		&marvel_ev7_mv,
@@ -884,14 +839,6 @@ get_sysvec(unsigned long type, unsigned long variation, unsigned long cpu)
 			if (vec == &eb164_mv && cpu == EV56_CPU)
 				vec = &pc164_mv;
 			break;
-		case ST_DEC_EB64P:
-			if (member < ARRAY_SIZE(eb64p_indices))
-				vec = eb64p_vecs[eb64p_indices[member]];
-			break;
-		case ST_DEC_EB66:
-			if (member < ARRAY_SIZE(eb66_indices))
-				vec = eb66_vecs[eb66_indices[member]];
-			break;
 		case ST_DEC_MARVEL:
 			if (member < ARRAY_SIZE(marvel_indices))
 				vec = marvel_vecs[marvel_indices[member]];
@@ -906,22 +853,13 @@ get_sysvec(unsigned long type, unsigned long variation, unsigned long cpu)
 				vec = tsunami_vecs[tsunami_indices[member]];
 			break;
 		case ST_DEC_1000:
-			if (cpu == EV5_CPU || cpu == EV56_CPU)
-				vec = &mikasa_primo_mv;
-			else
-				vec = &mikasa_mv;
+			vec = &mikasa_primo_mv;
 			break;
 		case ST_DEC_NORITAKE:
-			if (cpu == EV5_CPU || cpu == EV56_CPU)
-				vec = &noritake_primo_mv;
-			else
-				vec = &noritake_mv;
+			vec = &noritake_primo_mv;
 			break;
 		case ST_DEC_2100_A500:
-			if (cpu == EV5_CPU || cpu == EV56_CPU)
-				vec = &sable_gamma_mv;
-			else
-				vec = &sable_mv;
+			vec = &sable_gamma_mv;
 			break;
 		}
 	}
@@ -934,41 +872,27 @@ get_sysvec_byname(const char *name)
 	static struct alpha_machine_vector *all_vecs[] __initdata =
 	{
 		&alcor_mv,
-		&alphabook1_mv,
-		&avanti_mv,
-		&cabriolet_mv,
 		&clipper_mv,
 		&dp264_mv,
 		&eb164_mv,
-		&eb64p_mv,
-		&eb66_mv,
-		&eb66p_mv,
 		&eiger_mv,
-		&jensen_mv,
 		&lx164_mv,
-		&lynx_mv,
 		&miata_mv,
-		&mikasa_mv,
 		&mikasa_primo_mv,
 		&monet_mv,
 		&nautilus_mv,
-		&noname_mv,
-		&noritake_mv,
 		&noritake_primo_mv,
-		&p2k_mv,
 		&pc164_mv,
 		&privateer_mv,
 		&rawhide_mv,
 		&ruffian_mv,
 		&rx164_mv,
-		&sable_mv,
 		&sable_gamma_mv,
 		&shark_mv,
 		&sx164_mv,
 		&takara_mv,
 		&webbrick_mv,
 		&wildfire_mv,
-		&xl_mv,
 		&xlt_mv
 	};
 
@@ -1030,14 +954,6 @@ get_sysnames(unsigned long type, unsigned long variation, unsigned long cpu,
 		if (member < ARRAY_SIZE(alcor_indices))
 			*variation_name = alcor_names[alcor_indices[member]];
 		break;
-	case ST_DEC_EB64P:
-		if (member < ARRAY_SIZE(eb64p_indices))
-			*variation_name = eb64p_names[eb64p_indices[member]];
-		break;
-	case ST_DEC_EB66:
-		if (member < ARRAY_SIZE(eb66_indices))
-			*variation_name = eb66_names[eb66_indices[member]];
-		break;
 	case ST_DEC_MARVEL:
 		if (member < ARRAY_SIZE(marvel_indices))
 			*variation_name = marvel_names[marvel_indices[member]];
diff --git a/arch/alpha/kernel/signal.c b/arch/alpha/kernel/signal.c
index bc077babafab..e62d1d461b1f 100644
--- a/arch/alpha/kernel/signal.c
+++ b/arch/alpha/kernel/signal.c
@@ -22,7 +22,7 @@
 #include <linux/binfmts.h>
 #include <linux/bitops.h>
 #include <linux/syscalls.h>
-#include <linux/tracehook.h>
+#include <linux/resume_user_mode.h>
 
 #include <linux/uaccess.h>
 #include <asm/sigcontext.h>
@@ -150,9 +150,10 @@ restore_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs)
 {
 	unsigned long usp;
 	struct switch_stack *sw = (struct switch_stack *)regs - 1;
-	long i, err = __get_user(regs->pc, &sc->sc_pc);
+	long err = __get_user(regs->pc, &sc->sc_pc);
 
 	current->restart_block.fn = do_no_restart_syscall;
+	current_thread_info()->status |= TS_SAVED_FP | TS_RESTORE_FP;
 
 	sw->r26 = (unsigned long) ret_from_sys_call;
 
@@ -189,9 +190,9 @@ restore_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs)
 	err |= __get_user(usp, sc->sc_regs+30);
 	wrusp(usp);
 
-	for (i = 0; i < 31; i++)
-		err |= __get_user(sw->fp[i], sc->sc_fpregs+i);
-	err |= __get_user(sw->fp[31], &sc->sc_fpcr);
+	err |= __copy_from_user(current_thread_info()->fp,
+				sc->sc_fpregs, 31 * 8);
+	err |= __get_user(current_thread_info()->fp[31], &sc->sc_fpcr);
 
 	return err;
 }
@@ -272,7 +273,7 @@ setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
 		 unsigned long mask, unsigned long sp)
 {
 	struct switch_stack *sw = (struct switch_stack *)regs - 1;
-	long i, err = 0;
+	long err = 0;
 
 	err |= __put_user(on_sig_stack((unsigned long)sc), &sc->sc_onstack);
 	err |= __put_user(mask, &sc->sc_mask);
@@ -312,10 +313,10 @@ setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
 	err |= __put_user(sp, sc->sc_regs+30);
 	err |= __put_user(0, sc->sc_regs+31);
 
-	for (i = 0; i < 31; i++)
-		err |= __put_user(sw->fp[i], sc->sc_fpregs+i);
+	err |= __copy_to_user(sc->sc_fpregs,
+			      current_thread_info()->fp, 31 * 8);
 	err |= __put_user(0, sc->sc_fpregs+31);
-	err |= __put_user(sw->fp[31], &sc->sc_fpcr);
+	err |= __put_user(current_thread_info()->fp[31], &sc->sc_fpcr);
 
 	err |= __put_user(regs->trap_a0, &sc->sc_traparg_a0);
 	err |= __put_user(regs->trap_a1, &sc->sc_traparg_a1);
@@ -528,13 +529,16 @@ do_work_pending(struct pt_regs *regs, unsigned long thread_flags,
 		} else {
 			local_irq_enable();
 			if (thread_flags & (_TIF_SIGPENDING|_TIF_NOTIFY_SIGNAL)) {
+				preempt_disable();
+				save_fpu();
+				preempt_enable();
 				do_signal(regs, r0, r19);
 				r0 = 0;
 			} else {
-				tracehook_notify_resume(regs);
+				resume_user_mode_work(regs);
 			}
 		}
 		local_irq_disable();
-		thread_flags = current_thread_info()->flags;
+		thread_flags = read_thread_flags();
 	} while (thread_flags & _TIF_WORK_MASK);
 }
diff --git a/arch/alpha/kernel/smc37c669.c b/arch/alpha/kernel/smc37c669.c
index bbbd34586de0..a5a6ed97a6ce 100644
--- a/arch/alpha/kernel/smc37c669.c
+++ b/arch/alpha/kernel/smc37c669.c
@@ -11,6 +11,8 @@
 #include <asm/hwrpb.h>
 #include <asm/io.h>
 
+#include "proto.h"
+
 #if 0
 # define DBG_DEVS(args)         printk args
 #else
@@ -2430,13 +2432,15 @@ int __init smcc669_write( struct FILE *fp, int size, int number, unsigned char *
 }
 #endif
 
-void __init
+#if SMC_DEBUG
+static void __init
 SMC37c669_dump_registers(void)
 {
   int i;
   for (i = 0; i <= 0x29; i++)
     printk("-- CR%02x : %02x\n", i, SMC37c669_read_config(i));
 }
+#endif
 /*+
  * ============================================================================
  * = SMC_init - SMC37c669 Super I/O controller initialization                 =
diff --git a/arch/alpha/kernel/smc37c93x.c b/arch/alpha/kernel/smc37c93x.c
index 71cd7aca38ce..8028273f0d16 100644
--- a/arch/alpha/kernel/smc37c93x.c
+++ b/arch/alpha/kernel/smc37c93x.c
@@ -12,6 +12,8 @@
 #include <asm/hwrpb.h>
 #include <asm/io.h>
 
+#include "proto.h"
+
 #define SMC_DEBUG 0
 
 #if SMC_DEBUG
diff --git a/arch/alpha/kernel/smp.c b/arch/alpha/kernel/smp.c
index cb64e4797d2a..ed06367ece57 100644
--- a/arch/alpha/kernel/smp.c
+++ b/arch/alpha/kernel/smp.c
@@ -38,6 +38,7 @@
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
 #include <asm/tlbflush.h>
+#include <asm/cacheflush.h>
 
 #include "proto.h"
 #include "irq_impl.h"
@@ -467,11 +468,6 @@ smp_prepare_cpus(unsigned int max_cpus)
 	smp_num_cpus = smp_num_probed;
 }
 
-void
-smp_prepare_boot_cpu(void)
-{
-}
-
 int
 __cpu_up(unsigned int cpu, struct task_struct *tidle)
 {
@@ -497,12 +493,6 @@ smp_cpus_done(unsigned int max_cpus)
 	       ((bogosum + 2500) / (5000/HZ)) % 100);
 }
 
-int
-setup_profiling_timer(unsigned int multiplier)
-{
-	return -EINVAL;
-}
-
 static void
 send_ipi_message(const struct cpumask *to_whom, enum ipi_message_type operation)
 {
@@ -568,7 +558,7 @@ handle_ipi(struct pt_regs *regs)
 }
 
 void
-smp_send_reschedule(int cpu)
+arch_smp_send_reschedule(int cpu)
 {
 #ifdef DEBUG_IPI_MSG
 	if (cpu == hard_smp_processor_id())
@@ -634,7 +624,7 @@ flush_tlb_all(void)
 static void
 ipi_flush_tlb_mm(void *x)
 {
-	struct mm_struct *mm = (struct mm_struct *) x;
+	struct mm_struct *mm = x;
 	if (mm == current->active_mm && !asn_locked())
 		flush_tlb_current(mm);
 	else
@@ -676,7 +666,7 @@ struct flush_tlb_page_struct {
 static void
 ipi_flush_tlb_page(void *x)
 {
-	struct flush_tlb_page_struct *data = (struct flush_tlb_page_struct *)x;
+	struct flush_tlb_page_struct *data = x;
 	struct mm_struct * mm = data->mm;
 
 	if (mm == current->active_mm && !asn_locked())
diff --git a/arch/alpha/kernel/srm_env.c b/arch/alpha/kernel/srm_env.c
index 528d2be58182..217b4dca51dd 100644
--- a/arch/alpha/kernel/srm_env.c
+++ b/arch/alpha/kernel/srm_env.c
@@ -83,14 +83,14 @@ static int srm_env_proc_show(struct seq_file *m, void *v)
 
 static int srm_env_proc_open(struct inode *inode, struct file *file)
 {
-	return single_open(file, srm_env_proc_show, PDE_DATA(inode));
+	return single_open(file, srm_env_proc_show, pde_data(inode));
 }
 
 static ssize_t srm_env_proc_write(struct file *file, const char __user *buffer,
 				  size_t count, loff_t *pos)
 {
 	int res;
-	unsigned long	id = (unsigned long)PDE_DATA(file_inode(file));
+	unsigned long	id = (unsigned long)pde_data(file_inode(file));
 	char		*buf = (char *) __get_free_page(GFP_USER);
 	unsigned long	ret1, ret2;
 
diff --git a/arch/alpha/kernel/srmcons.c b/arch/alpha/kernel/srmcons.c
index 90635ef5dafa..d19e51ec711d 100644
--- a/arch/alpha/kernel/srmcons.c
+++ b/arch/alpha/kernel/srmcons.c
@@ -21,6 +21,8 @@
 #include <asm/console.h>
 #include <linux/uaccess.h>
 
+#include "proto.h"
+
 
 static DEFINE_SPINLOCK(srmcons_callback_lock);
 static int srm_is_registered_console = 0;
@@ -53,13 +55,13 @@ srmcons_do_receive_chars(struct tty_port *port)
 	do {
 		result.as_long = callback_getc(0);
 		if (result.bits.status < 2) {
-			tty_insert_flip_char(port, (char)result.bits.c, 0);
+			tty_insert_flip_char(port, (u8)result.bits.c, 0);
 			count++;
 		}
 	} while((result.bits.status & 1) && (++loops < 10));
 
 	if (count)
-		tty_schedule_flip(port);
+		tty_flip_buffer_push(port);
 
 	return count;
 }
@@ -67,7 +69,8 @@ srmcons_do_receive_chars(struct tty_port *port)
 static void
 srmcons_receive_chars(struct timer_list *t)
 {
-	struct srmcons_private *srmconsp = from_timer(srmconsp, t, timer);
+	struct srmcons_private *srmconsp = timer_container_of(srmconsp, t,
+							      timer);
 	struct tty_port *port = &srmconsp->port;
 	unsigned long flags;
 	int incr = 10;
@@ -88,30 +91,27 @@ srmcons_receive_chars(struct timer_list *t)
 }
 
 /* called with callback_lock held */
-static int
-srmcons_do_write(struct tty_port *port, const char *buf, int count)
+static void
+srmcons_do_write(struct tty_port *port, const u8 *buf, size_t count)
 {
-	static char str_cr[1] = "\r";
-	long c, remaining = count;
+	size_t c;
 	srmcons_result result;
-	char *cur;
-	int need_cr;
 
-	for (cur = (char *)buf; remaining > 0; ) {
-		need_cr = 0;
+	while (count > 0) {
+		bool need_cr = false;
 		/* 
 		 * Break it up into reasonable size chunks to allow a chance
 		 * for input to get in
 		 */
-		for (c = 0; c < min_t(long, 128L, remaining) && !need_cr; c++)
-			if (cur[c] == '\n')
-				need_cr = 1;
+		for (c = 0; c < min_t(size_t, 128U, count) && !need_cr; c++)
+			if (buf[c] == '\n')
+				need_cr = true;
 		
 		while (c > 0) {
-			result.as_long = callback_puts(0, cur, c);
+			result.as_long = callback_puts(0, buf, c);
 			c -= result.bits.c;
-			remaining -= result.bits.c;
-			cur += result.bits.c;
+			count -= result.bits.c;
+			buf += result.bits.c;
 
 			/*
 			 * Check for pending input iff a tty port was provided
@@ -121,22 +121,20 @@ srmcons_do_write(struct tty_port *port, const char *buf, int count)
 		}
 
 		while (need_cr) {
-			result.as_long = callback_puts(0, str_cr, 1);
+			result.as_long = callback_puts(0, "\r", 1);
 			if (result.bits.c > 0)
-				need_cr = 0;
+				need_cr = false;
 		}
 	}
-	return count;
 }
 
-static int
-srmcons_write(struct tty_struct *tty,
-	      const unsigned char *buf, int count)
+static ssize_t
+srmcons_write(struct tty_struct *tty, const u8 *buf, size_t count)
 {
 	unsigned long flags;
 
 	spin_lock_irqsave(&srmcons_callback_lock, flags);
-	srmcons_do_write(tty->port, (const char *) buf, count);
+	srmcons_do_write(tty->port, buf, count);
 	spin_unlock_irqrestore(&srmcons_callback_lock, flags);
 
 	return count;
@@ -180,7 +178,7 @@ srmcons_close(struct tty_struct *tty, struct file *filp)
 
 	if (tty->count == 1) {
 		port->tty = NULL;
-		del_timer(&srmconsp->timer);
+		timer_delete(&srmconsp->timer);
 	}
 
 	spin_unlock_irqrestore(&port->lock, flags);
@@ -199,40 +197,44 @@ static const struct tty_operations srmcons_ops = {
 static int __init
 srmcons_init(void)
 {
+	struct tty_driver *driver;
+	int err;
+
 	timer_setup(&srmcons_singleton.timer, srmcons_receive_chars, 0);
-	if (srm_is_registered_console) {
-		struct tty_driver *driver;
-		int err;
-
-		driver = tty_alloc_driver(MAX_SRM_CONSOLE_DEVICES, 0);
-		if (IS_ERR(driver))
-			return PTR_ERR(driver);
-
-		tty_port_init(&srmcons_singleton.port);
-
-		driver->driver_name = "srm";
-		driver->name = "srm";
-		driver->major = 0; 	/* dynamic */
-		driver->minor_start = 0;
-		driver->type = TTY_DRIVER_TYPE_SYSTEM;
-		driver->subtype = SYSTEM_TYPE_SYSCONS;
-		driver->init_termios = tty_std_termios;
-		tty_set_operations(driver, &srmcons_ops);
-		tty_port_link_device(&srmcons_singleton.port, driver, 0);
-		err = tty_register_driver(driver);
-		if (err) {
-			tty_driver_kref_put(driver);
-			tty_port_destroy(&srmcons_singleton.port);
-			return err;
-		}
-		srmcons_driver = driver;
-	}
 
-	return -ENODEV;
+	if (!srm_is_registered_console)
+		return -ENODEV;
+
+	driver = tty_alloc_driver(MAX_SRM_CONSOLE_DEVICES, 0);
+	if (IS_ERR(driver))
+		return PTR_ERR(driver);
+
+	tty_port_init(&srmcons_singleton.port);
+
+	driver->driver_name = "srm";
+	driver->name = "srm";
+	driver->major = 0;	/* dynamic */
+	driver->minor_start = 0;
+	driver->type = TTY_DRIVER_TYPE_SYSTEM;
+	driver->subtype = SYSTEM_TYPE_SYSCONS;
+	driver->init_termios = tty_std_termios;
+	tty_set_operations(driver, &srmcons_ops);
+	tty_port_link_device(&srmcons_singleton.port, driver, 0);
+	err = tty_register_driver(driver);
+	if (err)
+		goto err_free_drv;
+
+	srmcons_driver = driver;
+
+	return 0;
+err_free_drv:
+	tty_driver_kref_put(driver);
+	tty_port_destroy(&srmcons_singleton.port);
+
+	return err;
 }
 device_initcall(srmcons_init);
 
-
 /*
  * The console driver
  */
diff --git a/arch/alpha/kernel/sys_cabriolet.c b/arch/alpha/kernel/sys_cabriolet.c
index 47459b73cdb7..54e75d4fdbe3 100644
--- a/arch/alpha/kernel/sys_cabriolet.c
+++ b/arch/alpha/kernel/sys_cabriolet.c
@@ -6,8 +6,7 @@
  *	Copyright (C) 1996 Jay A Estabrook
  *	Copyright (C) 1998, 1999, 2000 Richard Henderson
  *
- * Code supporting the Cabriolet (AlphaPC64), EB66+, and EB164,
- * PC164 and LX164.
+ * Code supporting the PC164 and LX164.
  */
 
 #include <linux/kernel.h>
@@ -23,9 +22,7 @@
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
 #include <asm/io.h>
-#include <asm/core_apecs.h>
 #include <asm/core_cia.h>
-#include <asm/core_lca.h>
 #include <asm/tlbflush.h>
 
 #include "proto.h"
@@ -233,13 +230,6 @@ cabriolet_enable_ide(void)
 }
 
 static inline void __init
-cabriolet_init_pci(void)
-{
-	common_init_pci();
-	cabriolet_enable_ide();
-}
-
-static inline void __init
 cia_cab_init_pci(void)
 {
 	cia_init_pci();
@@ -317,81 +307,6 @@ alphapc164_init_pci(void)
  * The System Vector
  */
 
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_CABRIOLET)
-struct alpha_machine_vector cabriolet_mv __initmv = {
-	.vector_name		= "Cabriolet",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_APECS_IO,
-	.machine_check		= apecs_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 35,
-	.device_interrupt	= cabriolet_device_interrupt,
-
-	.init_arch		= apecs_init_arch,
-	.init_irq		= cabriolet_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= cabriolet_init_pci,
-	.pci_map_irq		= cabriolet_map_irq,
-	.pci_swizzle		= common_swizzle,
-};
-#ifndef CONFIG_ALPHA_EB64P
-ALIAS_MV(cabriolet)
-#endif
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB164)
-struct alpha_machine_vector eb164_mv __initmv = {
-	.vector_name		= "EB164",
-	DO_EV5_MMU,
-	DO_DEFAULT_RTC,
-	DO_CIA_IO,
-	.machine_check		= cia_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= CIA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 35,
-	.device_interrupt	= cabriolet_device_interrupt,
-
-	.init_arch		= cia_init_arch,
-	.init_irq		= cabriolet_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= cia_cab_init_pci,
-	.kill_arch		= cia_kill_arch,
-	.pci_map_irq		= cabriolet_map_irq,
-	.pci_swizzle		= common_swizzle,
-};
-ALIAS_MV(eb164)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB66P)
-struct alpha_machine_vector eb66p_mv __initmv = {
-	.vector_name		= "EB66+",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_LCA_IO,
-	.machine_check		= lca_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 35,
-	.device_interrupt	= cabriolet_device_interrupt,
-
-	.init_arch		= lca_init_arch,
-	.init_irq		= cabriolet_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= cabriolet_init_pci,
-	.pci_map_irq		= eb66p_map_irq,
-	.pci_swizzle		= common_swizzle,
-};
-ALIAS_MV(eb66p)
-#endif
-
 #if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_LX164)
 struct alpha_machine_vector lx164_mv __initmv = {
 	.vector_name		= "LX164",
diff --git a/arch/alpha/kernel/sys_eb64p.c b/arch/alpha/kernel/sys_eb64p.c
deleted file mode 100644
index 3c43fd347526..000000000000
--- a/arch/alpha/kernel/sys_eb64p.c
+++ /dev/null
@@ -1,238 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- *	linux/arch/alpha/kernel/sys_eb64p.c
- *
- *	Copyright (C) 1995 David A Rusling
- *	Copyright (C) 1996 Jay A Estabrook
- *	Copyright (C) 1998, 1999 Richard Henderson
- *
- * Code supporting the EB64+ and EB66.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-
-#include <asm/ptrace.h>
-#include <asm/dma.h>
-#include <asm/irq.h>
-#include <asm/mmu_context.h>
-#include <asm/io.h>
-#include <asm/core_apecs.h>
-#include <asm/core_lca.h>
-#include <asm/hwrpb.h>
-#include <asm/tlbflush.h>
-
-#include "proto.h"
-#include "irq_impl.h"
-#include "pci_impl.h"
-#include "machvec_impl.h"
-
-
-/* Note mask bit is true for DISABLED irqs.  */
-static unsigned int cached_irq_mask = -1;
-
-static inline void
-eb64p_update_irq_hw(unsigned int irq, unsigned long mask)
-{
-	outb(mask >> (irq >= 24 ? 24 : 16), (irq >= 24 ? 0x27 : 0x26));
-}
-
-static inline void
-eb64p_enable_irq(struct irq_data *d)
-{
-	eb64p_update_irq_hw(d->irq, cached_irq_mask &= ~(1 << d->irq));
-}
-
-static void
-eb64p_disable_irq(struct irq_data *d)
-{
-	eb64p_update_irq_hw(d->irq, cached_irq_mask |= 1 << d->irq);
-}
-
-static struct irq_chip eb64p_irq_type = {
-	.name		= "EB64P",
-	.irq_unmask	= eb64p_enable_irq,
-	.irq_mask	= eb64p_disable_irq,
-	.irq_mask_ack	= eb64p_disable_irq,
-};
-
-static void 
-eb64p_device_interrupt(unsigned long vector)
-{
-	unsigned long pld;
-	unsigned int i;
-
-	/* Read the interrupt summary registers */
-	pld = inb(0x26) | (inb(0x27) << 8);
-
-	/*
-	 * Now, for every possible bit set, work through
-	 * them and call the appropriate interrupt handler.
-	 */
-	while (pld) {
-		i = ffz(~pld);
-		pld &= pld - 1;	/* clear least bit set */
-
-		if (i == 5) {
-			isa_device_interrupt(vector);
-		} else {
-			handle_irq(16 + i);
-		}
-	}
-}
-
-static void __init
-eb64p_init_irq(void)
-{
-	long i;
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_CABRIOLET)
-	/*
-	 * CABRIO SRM may not set variation correctly, so here we test
-	 * the high word of the interrupt summary register for the RAZ
-	 * bits, and hope that a true EB64+ would read all ones...
-	 */
-	if (inw(0x806) != 0xffff) {
-		extern struct alpha_machine_vector cabriolet_mv;
-
-		printk("Detected Cabriolet: correcting HWRPB.\n");
-
-		hwrpb->sys_variation |= 2L << 10;
-		hwrpb_update_checksum(hwrpb);
-
-		alpha_mv = cabriolet_mv;
-		alpha_mv.init_irq();
-		return;
-	}
-#endif /* GENERIC */
-
-	outb(0xff, 0x26);
-	outb(0xff, 0x27);
-
-	init_i8259a_irqs();
-
-	for (i = 16; i < 32; ++i) {
-		irq_set_chip_and_handler(i, &eb64p_irq_type, handle_level_irq);
-		irq_set_status_flags(i, IRQ_LEVEL);
-	}
-
-	common_init_isa_dma();
-	if (request_irq(16 + 5, no_action, 0, "isa-cascade", NULL))
-		pr_err("Failed to register isa-cascade interrupt\n");
-}
-
-/*
- * PCI Fixup configuration.
- *
- * There are two 8 bit external summary registers as follows:
- *
- * Summary @ 0x26:
- * Bit      Meaning
- * 0        Interrupt Line A from slot 0
- * 1        Interrupt Line A from slot 1
- * 2        Interrupt Line B from slot 0
- * 3        Interrupt Line B from slot 1
- * 4        Interrupt Line C from slot 0
- * 5        Interrupt line from the two ISA PICs
- * 6        Tulip
- * 7        NCR SCSI
- *
- * Summary @ 0x27
- * Bit      Meaning
- * 0        Interrupt Line C from slot 1
- * 1        Interrupt Line D from slot 0
- * 2        Interrupt Line D from slot 1
- * 3        RAZ
- * 4        RAZ
- * 5        RAZ
- * 6        RAZ
- * 7        RAZ
- *
- * The device to slot mapping looks like:
- *
- * Slot     Device
- *  5       NCR SCSI controller
- *  6       PCI on board slot 0
- *  7       PCI on board slot 1
- *  8       Intel SIO PCI-ISA bridge chip
- *  9       Tulip - DECchip 21040 Ethernet controller
- *   
- *
- * This two layered interrupt approach means that we allocate IRQ 16 and 
- * above for PCI interrupts.  The IRQ relates to which bit the interrupt
- * comes in on.  This makes interrupt processing much easier.
- */
-
-static int
-eb64p_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static char irq_tab[5][5] = {
-		/*INT  INTA  INTB  INTC   INTD */
-		{16+7, 16+7, 16+7, 16+7,  16+7},  /* IdSel 5,  slot ?, ?? */
-		{16+0, 16+0, 16+2, 16+4,  16+9},  /* IdSel 6,  slot ?, ?? */
-		{16+1, 16+1, 16+3, 16+8, 16+10},  /* IdSel 7,  slot ?, ?? */
-		{  -1,   -1,   -1,   -1,    -1},  /* IdSel 8,  SIO */
-		{16+6, 16+6, 16+6, 16+6,  16+6},  /* IdSel 9,  TULIP */
-	};
-	const long min_idsel = 5, max_idsel = 9, irqs_per_slot = 5;
-	return COMMON_TABLE_LOOKUP;
-}
-
-
-/*
- * The System Vector
- */
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB64P)
-struct alpha_machine_vector eb64p_mv __initmv = {
-	.vector_name		= "EB64+",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_APECS_IO,
-	.machine_check		= apecs_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 32,
-	.device_interrupt	= eb64p_device_interrupt,
-
-	.init_arch		= apecs_init_arch,
-	.init_irq		= eb64p_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= common_init_pci,
-	.kill_arch		= NULL,
-	.pci_map_irq		= eb64p_map_irq,
-	.pci_swizzle		= common_swizzle,
-};
-ALIAS_MV(eb64p)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB66)
-struct alpha_machine_vector eb66_mv __initmv = {
-	.vector_name		= "EB66",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_LCA_IO,
-	.machine_check		= lca_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 32,
-	.device_interrupt	= eb64p_device_interrupt,
-
-	.init_arch		= lca_init_arch,
-	.init_irq		= eb64p_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= common_init_pci,
-	.pci_map_irq		= eb64p_map_irq,
-	.pci_swizzle		= common_swizzle,
-};
-ALIAS_MV(eb66)
-#endif
diff --git a/arch/alpha/kernel/sys_jensen.c b/arch/alpha/kernel/sys_jensen.c
deleted file mode 100644
index 5c9c88428124..000000000000
--- a/arch/alpha/kernel/sys_jensen.c
+++ /dev/null
@@ -1,237 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- *	linux/arch/alpha/kernel/sys_jensen.c
- *
- *	Copyright (C) 1995 Linus Torvalds
- *	Copyright (C) 1998, 1999 Richard Henderson
- *
- * Code supporting the Jensen.
- */
-#define __EXTERN_INLINE
-#include <asm/io.h>
-#include <asm/jensen.h>
-#undef  __EXTERN_INLINE
-
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-
-#include <asm/ptrace.h>
-
-#include <asm/dma.h>
-#include <asm/irq.h>
-#include <asm/mmu_context.h>
-#include <asm/tlbflush.h>
-
-#include "proto.h"
-#include "irq_impl.h"
-#include "pci_impl.h"
-#include "machvec_impl.h"
-
-
-/*
- * Jensen is special: the vector is 0x8X0 for EISA interrupt X, and
- * 0x9X0 for the local motherboard interrupts.
- *
- * Note especially that those local interrupts CANNOT be masked,
- * which causes much of the pain below...
- *
- *	0x660 - NMI
- *
- *	0x800 - IRQ0  interval timer (not used, as we use the RTC timer)
- *	0x810 - IRQ1  line printer (duh..)
- *	0x860 - IRQ6  floppy disk
- *
- *	0x900 - COM1
- *	0x920 - COM2
- *	0x980 - keyboard
- *	0x990 - mouse
- *
- * PCI-based systems are more sane: they don't have the local
- * interrupts at all, and have only normal PCI interrupts from
- * devices.  Happily it's easy enough to do a sane mapping from the
- * Jensen.
- * 
- * Note that this means that we may have to do a hardware
- * "local_op" to a different interrupt than we report to the rest of the
- * world.
- */
-
-static void
-jensen_local_enable(struct irq_data *d)
-{
-	/* the parport is really hw IRQ 1, silly Jensen.  */
-	if (d->irq == 7)
-		i8259a_enable_irq(d);
-}
-
-static void
-jensen_local_disable(struct irq_data *d)
-{
-	/* the parport is really hw IRQ 1, silly Jensen.  */
-	if (d->irq == 7)
-		i8259a_disable_irq(d);
-}
-
-static void
-jensen_local_mask_ack(struct irq_data *d)
-{
-	/* the parport is really hw IRQ 1, silly Jensen.  */
-	if (d->irq == 7)
-		i8259a_mask_and_ack_irq(d);
-}
-
-static struct irq_chip jensen_local_irq_type = {
-	.name		= "LOCAL",
-	.irq_unmask	= jensen_local_enable,
-	.irq_mask	= jensen_local_disable,
-	.irq_mask_ack	= jensen_local_mask_ack,
-};
-
-static void 
-jensen_device_interrupt(unsigned long vector)
-{
-	int irq;
-
-	switch (vector) {
-	case 0x660:
-		printk("Whee.. NMI received. Probable hardware error\n");
-		printk("61=%02x, 461=%02x\n", inb(0x61), inb(0x461));
-		return;
-
-	/* local device interrupts: */
-	case 0x900: irq = 4; break;		/* com1 -> irq 4 */
-	case 0x920: irq = 3; break;		/* com2 -> irq 3 */
-	case 0x980: irq = 1; break;		/* kbd -> irq 1 */
-	case 0x990: irq = 9; break;		/* mouse -> irq 9 */
-
-	default:
-		if (vector > 0x900) {
-			printk("Unknown local interrupt %lx\n", vector);
-			return;
-		}
-
-		irq = (vector - 0x800) >> 4;
-		if (irq == 1)
-			irq = 7;
-		break;
-	}
-
-	/* If there is no handler yet... */
-	if (!irq_has_action(irq)) {
-	    /* If it is a local interrupt that cannot be masked... */
-	    if (vector >= 0x900)
-	    {
-	        /* Clear keyboard/mouse state */
-	    	inb(0x64);
-		inb(0x60);
-		/* Reset serial ports */
-		inb(0x3fa);
-		inb(0x2fa);
-		outb(0x0c, 0x3fc);
-		outb(0x0c, 0x2fc);
-		/* Clear NMI */
-		outb(0,0x61);
-		outb(0,0x461);
-	    }
-	}
-
-#if 0
-        /* A useful bit of code to find out if an interrupt is going wild.  */
-        {
-          static unsigned int last_msg = 0, last_cc = 0;
-          static int last_irq = -1, count = 0;
-          unsigned int cc;
-
-          __asm __volatile("rpcc %0" : "=r"(cc));
-          ++count;
-#define JENSEN_CYCLES_PER_SEC	(150000000)
-          if (cc - last_msg > ((JENSEN_CYCLES_PER_SEC) * 3) ||
-	      irq != last_irq) {
-                printk(KERN_CRIT " irq %d count %d cc %u @ %lx\n",
-                       irq, count, cc-last_cc, get_irq_regs()->pc);
-                count = 0;
-                last_msg = cc;
-                last_irq = irq;
-          }
-          last_cc = cc;
-        }
-#endif
-
-	handle_irq(irq);
-}
-
-static void __init
-jensen_init_irq(void)
-{
-	init_i8259a_irqs();
-
-	irq_set_chip_and_handler(1, &jensen_local_irq_type, handle_level_irq);
-	irq_set_chip_and_handler(4, &jensen_local_irq_type, handle_level_irq);
-	irq_set_chip_and_handler(3, &jensen_local_irq_type, handle_level_irq);
-	irq_set_chip_and_handler(7, &jensen_local_irq_type, handle_level_irq);
-	irq_set_chip_and_handler(9, &jensen_local_irq_type, handle_level_irq);
-
-	common_init_isa_dma();
-}
-
-static void __init
-jensen_init_arch(void)
-{
-	struct pci_controller *hose;
-#ifdef CONFIG_PCI
-	static struct pci_dev fake_isa_bridge = { .dma_mask = 0xffffffffUL, };
-
-	isa_bridge = &fake_isa_bridge;
-#endif
-
-	/* Create a hose so that we can report i/o base addresses to
-	   userland.  */
-
-	pci_isa_hose = hose = alloc_pci_controller();
-	hose->io_space = &ioport_resource;
-	hose->mem_space = &iomem_resource;
-	hose->index = 0;
-
-	hose->sparse_mem_base = EISA_MEM - IDENT_ADDR;
-	hose->dense_mem_base = 0;
-	hose->sparse_io_base = EISA_IO - IDENT_ADDR;
-	hose->dense_io_base = 0;
-
-	hose->sg_isa = hose->sg_pci = NULL;
-	__direct_map_base = 0;
-	__direct_map_size = 0xffffffff;
-}
-
-static void
-jensen_machine_check(unsigned long vector, unsigned long la)
-{
-	printk(KERN_CRIT "Machine check\n");
-}
-
-/*
- * The System Vector
- */
-
-struct alpha_machine_vector jensen_mv __initmv = {
-	.vector_name		= "Jensen",
-	DO_EV4_MMU,
-	IO_LITE(JENSEN,jensen),
-	.machine_check		= jensen_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.rtc_port		= 0x170,
-
-	.nr_irqs		= 16,
-	.device_interrupt	= jensen_device_interrupt,
-
-	.init_arch		= jensen_init_arch,
-	.init_irq		= jensen_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= NULL,
-	.kill_arch		= NULL,
-};
-ALIAS_MV(jensen)
diff --git a/arch/alpha/kernel/sys_miata.c b/arch/alpha/kernel/sys_miata.c
index e1bee8f84c58..33b2798de8fc 100644
--- a/arch/alpha/kernel/sys_miata.c
+++ b/arch/alpha/kernel/sys_miata.c
@@ -183,16 +183,17 @@ miata_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
            the 2nd 8259 controller. So we have to check for it first. */
 
 	if((slot == 7) && (PCI_FUNC(dev->devfn) == 3)) {
-		u8 irq=0;
 		struct pci_dev *pdev = pci_get_slot(dev->bus, dev->devfn & ~7);
-		if(pdev == NULL || pci_read_config_byte(pdev, 0x40,&irq) != PCIBIOS_SUCCESSFUL) {
-			pci_dev_put(pdev);
+		u8 irq = 0;
+		int ret;
+
+		if (!pdev)
 			return -1;
-		}
-		else	{
-			pci_dev_put(pdev);
-			return irq;
-		}
+
+		ret = pci_read_config_byte(pdev, 0x40, &irq);
+		pci_dev_put(pdev);
+
+		return ret == PCIBIOS_SUCCESSFUL ? irq : -1;
 	}
 
 	return COMMON_TABLE_LOOKUP;
diff --git a/arch/alpha/kernel/sys_mikasa.c b/arch/alpha/kernel/sys_mikasa.c
index 7690dfd57cb6..557802398231 100644
--- a/arch/alpha/kernel/sys_mikasa.c
+++ b/arch/alpha/kernel/sys_mikasa.c
@@ -23,7 +23,6 @@
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
 #include <asm/io.h>
-#include <asm/core_apecs.h>
 #include <asm/core_cia.h>
 #include <asm/tlbflush.h>
 
@@ -164,64 +163,9 @@ mikasa_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 }
 
 
-#if defined(CONFIG_ALPHA_GENERIC) || !defined(CONFIG_ALPHA_PRIMO)
-static void
-mikasa_apecs_machine_check(unsigned long vector, unsigned long la_ptr)
-{
-#define MCHK_NO_DEVSEL 0x205U
-#define MCHK_NO_TABT 0x204U
-
-	struct el_common *mchk_header;
-	unsigned int code;
-
-	mchk_header = (struct el_common *)la_ptr;
-
-	/* Clear the error before any reporting.  */
-	mb();
-	mb(); /* magic */
-	draina();
-	apecs_pci_clr_err();
-	wrmces(0x7);
-	mb();
-
-	code = mchk_header->code;
-	process_mcheck_info(vector, la_ptr, "MIKASA APECS",
-			    (mcheck_expected(0)
-			     && (code == MCHK_NO_DEVSEL
-			         || code == MCHK_NO_TABT)));
-}
-#endif
-
-
 /*
  * The System Vector
  */
-
-#if defined(CONFIG_ALPHA_GENERIC) || !defined(CONFIG_ALPHA_PRIMO)
-struct alpha_machine_vector mikasa_mv __initmv = {
-	.vector_name		= "Mikasa",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_APECS_IO,
-	.machine_check		= mikasa_apecs_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 32,
-	.device_interrupt	= mikasa_device_interrupt,
-
-	.init_arch		= apecs_init_arch,
-	.init_irq		= mikasa_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= common_init_pci,
-	.pci_map_irq		= mikasa_map_irq,
-	.pci_swizzle		= common_swizzle,
-};
-ALIAS_MV(mikasa)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_PRIMO)
 struct alpha_machine_vector mikasa_primo_mv __initmv = {
 	.vector_name		= "Mikasa-Primo",
 	DO_EV5_MMU,
@@ -244,4 +188,3 @@ struct alpha_machine_vector mikasa_primo_mv __initmv = {
 	.pci_swizzle		= common_swizzle,
 };
 ALIAS_MV(mikasa_primo)
-#endif
diff --git a/arch/alpha/kernel/sys_nautilus.c b/arch/alpha/kernel/sys_nautilus.c
index 96fd6ff3fe81..13b79960b4b9 100644
--- a/arch/alpha/kernel/sys_nautilus.c
+++ b/arch/alpha/kernel/sys_nautilus.c
@@ -78,7 +78,7 @@ nautilus_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 	return irq;
 }
 
-void
+static void
 nautilus_kill_arch(int mode)
 {
 	struct pci_bus *bus = pci_isa_hose->bus;
@@ -127,7 +127,7 @@ naut_sys_machine_check(unsigned long vector, unsigned long la_ptr,
 /* Machine checks can come from two sources - those on the CPU and those
    in the system.  They are analysed separately but all starts here.  */
 
-void
+static void
 nautilus_machine_check(unsigned long vector, unsigned long la_ptr)
 {
 	char *mchk_class;
@@ -184,8 +184,6 @@ nautilus_machine_check(unsigned long vector, unsigned long la_ptr)
 	mb();
 }
 
-extern void pcibios_claim_one_bus(struct pci_bus *);
-
 static struct resource irongate_mem = {
 	.name	= "Irongate PCI MEM",
 	.flags	= IORESOURCE_MEM,
@@ -197,7 +195,7 @@ static struct resource busn_resource = {
 	.flags	= IORESOURCE_BUS,
 };
 
-void __init
+static void __init
 nautilus_init_pci(void)
 {
 	struct pci_controller *hose = hose_head;
diff --git a/arch/alpha/kernel/sys_noritake.c b/arch/alpha/kernel/sys_noritake.c
index 47f3ce4f719a..eed3f16561c0 100644
--- a/arch/alpha/kernel/sys_noritake.c
+++ b/arch/alpha/kernel/sys_noritake.c
@@ -24,7 +24,6 @@
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
 #include <asm/io.h>
-#include <asm/core_apecs.h>
 #include <asm/core_cia.h>
 #include <asm/tlbflush.h>
 
@@ -253,64 +252,6 @@ noritake_swizzle(struct pci_dev *dev, u8 *pinp)
 	return slot;
 }
 
-#if defined(CONFIG_ALPHA_GENERIC) || !defined(CONFIG_ALPHA_PRIMO)
-static void
-noritake_apecs_machine_check(unsigned long vector, unsigned long la_ptr)
-{
-#define MCHK_NO_DEVSEL 0x205U
-#define MCHK_NO_TABT 0x204U
-
-        struct el_common *mchk_header;
-        unsigned int code;
-
-        mchk_header = (struct el_common *)la_ptr;
-
-        /* Clear the error before any reporting.  */
-        mb();
-        mb(); /* magic */
-        draina();
-        apecs_pci_clr_err();
-        wrmces(0x7);
-        mb();
-
-        code = mchk_header->code;
-        process_mcheck_info(vector, la_ptr, "NORITAKE APECS",
-                            (mcheck_expected(0)
-                             && (code == MCHK_NO_DEVSEL
-                                 || code == MCHK_NO_TABT)));
-}
-#endif
-
-
-/*
- * The System Vectors
- */
-
-#if defined(CONFIG_ALPHA_GENERIC) || !defined(CONFIG_ALPHA_PRIMO)
-struct alpha_machine_vector noritake_mv __initmv = {
-	.vector_name		= "Noritake",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_APECS_IO,
-	.machine_check		= noritake_apecs_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= EISA_DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 48,
-	.device_interrupt	= noritake_device_interrupt,
-
-	.init_arch		= apecs_init_arch,
-	.init_irq		= noritake_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= common_init_pci,
-	.pci_map_irq		= noritake_map_irq,
-	.pci_swizzle		= noritake_swizzle,
-};
-ALIAS_MV(noritake)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_PRIMO)
 struct alpha_machine_vector noritake_primo_mv __initmv = {
 	.vector_name		= "Noritake-Primo",
 	DO_EV5_MMU,
@@ -333,4 +274,3 @@ struct alpha_machine_vector noritake_primo_mv __initmv = {
 	.pci_swizzle		= noritake_swizzle,
 };
 ALIAS_MV(noritake_primo)
-#endif
diff --git a/arch/alpha/kernel/sys_sable.c b/arch/alpha/kernel/sys_sable.c
index 930005b2f630..49f5c75134ec 100644
--- a/arch/alpha/kernel/sys_sable.c
+++ b/arch/alpha/kernel/sys_sable.c
@@ -212,232 +212,6 @@ sable_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 }
 #endif /* defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_SABLE) */
 
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_LYNX)
-
-/***********************************************************************/
-/* LYNX hardware specifics
- */
-/*
- *   For LYNX, which is also baroque, we manage 64 IRQs, via a custom IC.
- *
- * Bit      Meaning               Kernel IRQ
- *------------------------------------------
- * 0        
- * 1        
- * 2        
- * 3        mouse			12
- * 4        
- * 5        
- * 6        keyboard			1
- * 7        floppy			6
- * 8        COM2			3
- * 9        parallel port		7
- *10        EISA irq 3			-
- *11        EISA irq 4			-
- *12        EISA irq 5			5
- *13        EISA irq 6			-
- *14        EISA irq 7			-
- *15        COM1			4
- *16        EISA irq 9			9
- *17        EISA irq 10			10
- *18        EISA irq 11			11
- *19        EISA irq 12			-
- *20        
- *21        EISA irq 14			14
- *22        EISA irq 15			15
- *23        IIC				-
- *24        VGA (builtin)               -
- *25
- *26
- *27
- *28        NCR810 (builtin)		28
- *29
- *30
- *31
- *32        PCI 0 slot 4 A primary bus  32
- *33        PCI 0 slot 4 B primary bus  33
- *34        PCI 0 slot 4 C primary bus  34
- *35        PCI 0 slot 4 D primary bus
- *36        PCI 0 slot 5 A primary bus
- *37        PCI 0 slot 5 B primary bus
- *38        PCI 0 slot 5 C primary bus
- *39        PCI 0 slot 5 D primary bus
- *40        PCI 0 slot 6 A primary bus
- *41        PCI 0 slot 6 B primary bus
- *42        PCI 0 slot 6 C primary bus
- *43        PCI 0 slot 6 D primary bus
- *44        PCI 0 slot 7 A primary bus
- *45        PCI 0 slot 7 B primary bus
- *46        PCI 0 slot 7 C primary bus
- *47        PCI 0 slot 7 D primary bus
- *48        PCI 0 slot 0 A secondary bus
- *49        PCI 0 slot 0 B secondary bus
- *50        PCI 0 slot 0 C secondary bus
- *51        PCI 0 slot 0 D secondary bus
- *52        PCI 0 slot 1 A secondary bus
- *53        PCI 0 slot 1 B secondary bus
- *54        PCI 0 slot 1 C secondary bus
- *55        PCI 0 slot 1 D secondary bus
- *56        PCI 0 slot 2 A secondary bus
- *57        PCI 0 slot 2 B secondary bus
- *58        PCI 0 slot 2 C secondary bus
- *59        PCI 0 slot 2 D secondary bus
- *60        PCI 0 slot 3 A secondary bus
- *61        PCI 0 slot 3 B secondary bus
- *62        PCI 0 slot 3 C secondary bus
- *63        PCI 0 slot 3 D secondary bus
- */
-
-static void
-lynx_update_irq_hw(unsigned long bit, unsigned long mask)
-{
-	/*
-	 * Write the AIR register on the T3/T4 with the
-	 * address of the IC mask register (offset 0x40)
-	 */
-	*(vulp)T2_AIR = 0x40;
-	mb();
-	*(vulp)T2_AIR; /* re-read to force write */
-	mb();
-	*(vulp)T2_DIR = mask;    
-	mb();
-	mb();
-}
-
-static void
-lynx_ack_irq_hw(unsigned long bit)
-{
-	*(vulp)T2_VAR = (u_long) bit;
-	mb();
-	mb();
-}
-
-static irq_swizzle_t lynx_irq_swizzle = {
-	{ /* irq_to_mask */
-		-1,  6, -1,  8, 15, 12,  7,  9,	/* pseudo PIC  0-7  */
-		-1, 16, 17, 18,  3, -1, 21, 22,	/* pseudo PIC  8-15 */
-		-1, -1, -1, -1, -1, -1, -1, -1,	/* pseudo */
-		-1, -1, -1, -1, 28, -1, -1, -1,	/* pseudo */
-		32, 33, 34, 35, 36, 37, 38, 39,	/* mask 32-39 */
-		40, 41, 42, 43, 44, 45, 46, 47,	/* mask 40-47 */
-		48, 49, 50, 51, 52, 53, 54, 55,	/* mask 48-55 */
-		56, 57, 58, 59, 60, 61, 62, 63	/* mask 56-63 */
-	},
-	{ /* mask_to_irq */
-		-1, -1, -1, 12, -1, -1,  1,  6,	/* mask 0-7   */
-		 3,  7, -1, -1,  5, -1, -1,  4,	/* mask 8-15  */
-		 9, 10, 11, -1, -1, 14, 15, -1,	/* mask 16-23 */
-		-1, -1, -1, -1, 28, -1, -1, -1,	/* mask 24-31 */
-		32, 33, 34, 35, 36, 37, 38, 39,	/* mask 32-39 */
-		40, 41, 42, 43, 44, 45, 46, 47,	/* mask 40-47 */
-		48, 49, 50, 51, 52, 53, 54, 55,	/* mask 48-55 */
-		56, 57, 58, 59, 60, 61, 62, 63	/* mask 56-63 */
-	},
-	-1,
-	lynx_update_irq_hw,
-	lynx_ack_irq_hw
-};
-
-static void __init
-lynx_init_irq(void)
-{
-	sable_lynx_irq_swizzle = &lynx_irq_swizzle;
-	sable_lynx_init_irq(64);
-}
-
-/*
- * PCI Fixup configuration for ALPHA LYNX (2100A)
- *
- * The device to slot mapping looks like:
- *
- * Slot     Device
- *  0       none
- *  1       none
- *  2       PCI-EISA bridge
- *  3       PCI-PCI bridge
- *  4       NCR 810 (Demi-Lynx only)
- *  5       none
- *  6       PCI on board slot 4
- *  7       PCI on board slot 5
- *  8       PCI on board slot 6
- *  9       PCI on board slot 7
- *
- * And behind the PPB we have:
- *
- * 11       PCI on board slot 0
- * 12       PCI on board slot 1
- * 13       PCI on board slot 2
- * 14       PCI on board slot 3
- */
-/*
- * NOTE: the IRQ assignments below are arbitrary, but need to be consistent
- * with the values in the irq swizzling tables above.
- */
-
-static int
-lynx_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static char irq_tab[19][5] = {
-		/*INT    INTA   INTB   INTC   INTD */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 13,  PCEB   */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 14,  PPB    */
-		{   28,    28,    28,    28,    28},  /* IdSel 15,  NCR demi */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 16,  none   */
-		{   32,    32,    33,    34,    35},  /* IdSel 17,  slot 4 */
-		{   36,    36,    37,    38,    39},  /* IdSel 18,  slot 5 */
-		{   40,    40,    41,    42,    43},  /* IdSel 19,  slot 6 */
-		{   44,    44,    45,    46,    47},  /* IdSel 20,  slot 7 */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 22,  none   */
-		/* The following are actually behind the PPB. */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 16   none */
-		{   28,    28,    28,    28,    28},  /* IdSel 17   NCR lynx */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 18   none */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 19   none */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 20   none */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 21   none */
-		{   48,    48,    49,    50,    51},  /* IdSel 22   slot 0 */
-		{   52,    52,    53,    54,    55},  /* IdSel 23   slot 1 */
-		{   56,    56,    57,    58,    59},  /* IdSel 24   slot 2 */
-		{   60,    60,    61,    62,    63}   /* IdSel 25   slot 3 */
-	};
-	const long min_idsel = 2, max_idsel = 20, irqs_per_slot = 5;
-	return COMMON_TABLE_LOOKUP;
-}
-
-static u8
-lynx_swizzle(struct pci_dev *dev, u8 *pinp)
-{
-	int slot, pin = *pinp;
-
-	if (dev->bus->number == 0) {
-		slot = PCI_SLOT(dev->devfn);
-	}
-	/* Check for the built-in bridge */
-	else if (PCI_SLOT(dev->bus->self->devfn) == 3) {
-		slot = PCI_SLOT(dev->devfn) + 11;
-	}
-	else
-	{
-		/* Must be a card-based bridge.  */
-		do {
-			if (PCI_SLOT(dev->bus->self->devfn) == 3) {
-				slot = PCI_SLOT(dev->devfn) + 11;
-				break;
-			}
-			pin = pci_swizzle_interrupt_pin(dev, pin);
-
-			/* Move up the chain of bridges.  */
-			dev = dev->bus->self;
-			/* Slot of the next bridge.  */
-			slot = PCI_SLOT(dev->devfn);
-		} while (dev->bus->self);
-	}
-	*pinp = pin;
-	return slot;
-}
-
-#endif /* defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_LYNX) */
-
 /***********************************************************************/
 /* GENERIC irq routines */
 
@@ -539,40 +313,7 @@ sable_lynx_init_pci(void)
  * these games with GAMMA_BIAS.
  */
 
-#if defined(CONFIG_ALPHA_GENERIC) || \
-    (defined(CONFIG_ALPHA_SABLE) && !defined(CONFIG_ALPHA_GAMMA))
-#undef GAMMA_BIAS
-#define GAMMA_BIAS 0
-struct alpha_machine_vector sable_mv __initmv = {
-	.vector_name		= "Sable",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_T2_IO,
-	.machine_check		= t2_machine_check,
-	.max_isa_dma_address	= ALPHA_SABLE_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= EISA_DEFAULT_IO_BASE,
-	.min_mem_address	= T2_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 40,
-	.device_interrupt	= sable_lynx_srm_device_interrupt,
-
-	.init_arch		= t2_init_arch,
-	.init_irq		= sable_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= sable_lynx_init_pci,
-	.kill_arch		= t2_kill_arch,
-	.pci_map_irq		= sable_map_irq,
-	.pci_swizzle		= common_swizzle,
-
-	.sys = { .t2 = {
-	    .gamma_bias		= 0
-	} }
-};
-ALIAS_MV(sable)
-#endif /* GENERIC || (SABLE && !GAMMA) */
-
-#if defined(CONFIG_ALPHA_GENERIC) || \
-    (defined(CONFIG_ALPHA_SABLE) && defined(CONFIG_ALPHA_GAMMA))
+#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_SABLE)
 #undef GAMMA_BIAS
 #define GAMMA_BIAS _GAMMA_BIAS
 struct alpha_machine_vector sable_gamma_mv __initmv = {
@@ -601,35 +342,4 @@ struct alpha_machine_vector sable_gamma_mv __initmv = {
 	} }
 };
 ALIAS_MV(sable_gamma)
-#endif /* GENERIC || (SABLE && GAMMA) */
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_LYNX)
-#undef GAMMA_BIAS
-#define GAMMA_BIAS _GAMMA_BIAS
-struct alpha_machine_vector lynx_mv __initmv = {
-	.vector_name		= "Lynx",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_T2_IO,
-	.machine_check		= t2_machine_check,
-	.max_isa_dma_address	= ALPHA_SABLE_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= EISA_DEFAULT_IO_BASE,
-	.min_mem_address	= T2_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 64,
-	.device_interrupt	= sable_lynx_srm_device_interrupt,
-
-	.init_arch		= t2_init_arch,
-	.init_irq		= lynx_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= sable_lynx_init_pci,
-	.kill_arch		= t2_kill_arch,
-	.pci_map_irq		= lynx_map_irq,
-	.pci_swizzle		= lynx_swizzle,
-
-	.sys = { .t2 = {
-	    .gamma_bias		= _GAMMA_BIAS
-	} }
-};
-ALIAS_MV(lynx)
-#endif /* GENERIC || LYNX */
+#endif /* GENERIC || SABLE */
diff --git a/arch/alpha/kernel/sys_sio.c b/arch/alpha/kernel/sys_sio.c
deleted file mode 100644
index 7c420d8dac53..000000000000
--- a/arch/alpha/kernel/sys_sio.c
+++ /dev/null
@@ -1,484 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- *	linux/arch/alpha/kernel/sys_sio.c
- *
- *	Copyright (C) 1995 David A Rusling
- *	Copyright (C) 1996 Jay A Estabrook
- *	Copyright (C) 1998, 1999 Richard Henderson
- *
- * Code for all boards that route the PCI interrupts through the SIO
- * PCI/ISA bridge.  This includes Noname (AXPpci33), Multia (UDB),
- * Kenetics's Platform 2000, Avanti (AlphaStation), XL, and AlphaBook1.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/screen_info.h>
-
-#include <asm/compiler.h>
-#include <asm/ptrace.h>
-#include <asm/dma.h>
-#include <asm/irq.h>
-#include <asm/mmu_context.h>
-#include <asm/io.h>
-#include <asm/core_apecs.h>
-#include <asm/core_lca.h>
-#include <asm/tlbflush.h>
-
-#include "proto.h"
-#include "irq_impl.h"
-#include "pci_impl.h"
-#include "machvec_impl.h"
-#include "pc873xx.h"
-
-#if defined(ALPHA_RESTORE_SRM_SETUP)
-/* Save LCA configuration data as the console had it set up.  */
-struct 
-{
-	unsigned int orig_route_tab; /* for SAVE/RESTORE */
-} saved_config __attribute((common));
-#endif
-
-
-static void __init
-sio_init_irq(void)
-{
-	if (alpha_using_srm)
-		alpha_mv.device_interrupt = srm_device_interrupt;
-
-	init_i8259a_irqs();
-	common_init_isa_dma();
-}
-
-static inline void __init
-alphabook1_init_arch(void)
-{
-	/* The AlphaBook1 has LCD video fixed at 800x600,
-	   37 rows and 100 cols. */
-	screen_info.orig_y = 37;
-	screen_info.orig_video_cols = 100;
-	screen_info.orig_video_lines = 37;
-
-	lca_init_arch();
-}
-
-
-/*
- * sio_route_tab selects irq routing in PCI/ISA bridge so that:
- *		PIRQ0 -> irq 15
- *		PIRQ1 -> irq  9
- *		PIRQ2 -> irq 10
- *		PIRQ3 -> irq 11
- *
- * This probably ought to be configurable via MILO.  For
- * example, sound boards seem to like using IRQ 9.
- *
- * This is NOT how we should do it. PIRQ0-X should have
- * their own IRQs, the way intel uses the IO-APIC IRQs.
- */
-
-static void __init
-sio_pci_route(void)
-{
-	unsigned int orig_route_tab;
-
-	/* First, ALWAYS read and print the original setting. */
-	pci_bus_read_config_dword(pci_isa_hose->bus, PCI_DEVFN(7, 0), 0x60,
-				  &orig_route_tab);
-	printk("%s: PIRQ original 0x%x new 0x%x\n", __func__,
-	       orig_route_tab, alpha_mv.sys.sio.route_tab);
-
-#if defined(ALPHA_RESTORE_SRM_SETUP)
-	saved_config.orig_route_tab = orig_route_tab;
-#endif
-
-	/* Now override with desired setting. */
-	pci_bus_write_config_dword(pci_isa_hose->bus, PCI_DEVFN(7, 0), 0x60,
-				   alpha_mv.sys.sio.route_tab);
-}
-
-static bool sio_pci_dev_irq_needs_level(const struct pci_dev *dev)
-{
-	if ((dev->class >> 16 == PCI_BASE_CLASS_BRIDGE) &&
-	    (dev->class >> 8 != PCI_CLASS_BRIDGE_PCMCIA))
-		return false;
-
-	return true;
-}
-
-static unsigned int __init
-sio_collect_irq_levels(void)
-{
-	unsigned int level_bits = 0;
-	struct pci_dev *dev = NULL;
-
-	/* Iterate through the devices, collecting IRQ levels.  */
-	for_each_pci_dev(dev) {
-		if (!sio_pci_dev_irq_needs_level(dev))
-			continue;
-
-		if (dev->irq)
-			level_bits |= (1 << dev->irq);
-	}
-	return level_bits;
-}
-
-static void __sio_fixup_irq_levels(unsigned int level_bits, bool reset)
-{
-	unsigned int old_level_bits;
-
-	/*
-	 * Now, make all PCI interrupts level sensitive.  Notice:
-	 * these registers must be accessed byte-wise.  inw()/outw()
-	 * don't work.
-	 *
-	 * Make sure to turn off any level bits set for IRQs 9,10,11,15,
-	 *  so that the only bits getting set are for devices actually found.
-	 * Note that we do preserve the remainder of the bits, which we hope
-	 *  will be set correctly by ARC/SRM.
-	 *
-	 * Note: we at least preserve any level-set bits on AlphaBook1
-	 */
-	old_level_bits = inb(0x4d0) | (inb(0x4d1) << 8);
-
-	if (reset)
-		old_level_bits &= 0x71ff;
-
-	level_bits |= old_level_bits;
-
-	outb((level_bits >> 0) & 0xff, 0x4d0);
-	outb((level_bits >> 8) & 0xff, 0x4d1);
-}
-
-static inline void
-sio_fixup_irq_levels(unsigned int level_bits)
-{
-	__sio_fixup_irq_levels(level_bits, true);
-}
-
-static inline int
-noname_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	/*
-	 * The Noname board has 5 PCI slots with each of the 4
-	 * interrupt pins routed to different pins on the PCI/ISA
-	 * bridge (PIRQ0-PIRQ3).  The table below is based on
-	 * information available at:
-	 *
-	 *   http://ftp.digital.com/pub/DEC/axppci/ref_interrupts.txt
-	 *
-	 * I have no information on the Avanti interrupt routing, but
-	 * the routing seems to be identical to the Noname except
-	 * that the Avanti has an additional slot whose routing I'm
-	 * unsure of.
-	 *
-	 * pirq_tab[0] is a fake entry to deal with old PCI boards
-	 * that have the interrupt pin number hardwired to 0 (meaning
-	 * that they use the default INTA line, if they are interrupt
-	 * driven at all).
-	 */
-	static char irq_tab[][5] = {
-		/*INT A   B   C   D */
-		{ 3,  3,  3,  3,  3}, /* idsel  6 (53c810) */ 
-		{-1, -1, -1, -1, -1}, /* idsel  7 (SIO: PCI/ISA bridge) */
-		{ 2,  2, -1, -1, -1}, /* idsel  8 (Hack: slot closest ISA) */
-		{-1, -1, -1, -1, -1}, /* idsel  9 (unused) */
-		{-1, -1, -1, -1, -1}, /* idsel 10 (unused) */
-		{ 0,  0,  2,  1,  0}, /* idsel 11 KN25_PCI_SLOT0 */
-		{ 1,  1,  0,  2,  1}, /* idsel 12 KN25_PCI_SLOT1 */
-		{ 2,  2,  1,  0,  2}, /* idsel 13 KN25_PCI_SLOT2 */
-		{ 0,  0,  0,  0,  0}, /* idsel 14 AS255 TULIP */
-	};
-	const long min_idsel = 6, max_idsel = 14, irqs_per_slot = 5;
-	int irq = COMMON_TABLE_LOOKUP, tmp;
-	tmp = __kernel_extbl(alpha_mv.sys.sio.route_tab, irq);
-
-	irq = irq >= 0 ? tmp : -1;
-
-	/* Fixup IRQ level if an actual IRQ mapping is detected */
-	if (sio_pci_dev_irq_needs_level(dev) && irq >= 0)
-		__sio_fixup_irq_levels(1 << irq, false);
-
-	return irq;
-}
-
-static inline int
-p2k_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static char irq_tab[][5] = {
-		/*INT A   B   C   D */
-		{ 0,  0, -1, -1, -1}, /* idsel  6 (53c810) */
-		{-1, -1, -1, -1, -1}, /* idsel  7 (SIO: PCI/ISA bridge) */
-		{ 1,  1,  2,  3,  0}, /* idsel  8 (slot A) */
-		{ 2,  2,  3,  0,  1}, /* idsel  9 (slot B) */
-		{-1, -1, -1, -1, -1}, /* idsel 10 (unused) */
-		{-1, -1, -1, -1, -1}, /* idsel 11 (unused) */
-		{ 3,  3, -1, -1, -1}, /* idsel 12 (CMD0646) */
-	};
-	const long min_idsel = 6, max_idsel = 12, irqs_per_slot = 5;
-	int irq = COMMON_TABLE_LOOKUP, tmp;
-	tmp = __kernel_extbl(alpha_mv.sys.sio.route_tab, irq);
-	return irq >= 0 ? tmp : -1;
-}
-
-static inline void __init
-noname_init_pci(void)
-{
-	common_init_pci();
-	sio_pci_route();
-	sio_fixup_irq_levels(sio_collect_irq_levels());
-
-	if (pc873xx_probe() == -1) {
-		printk(KERN_ERR "Probing for PC873xx Super IO chip failed.\n");
-	} else {
-		printk(KERN_INFO "Found %s Super IO chip at 0x%x\n",
-			pc873xx_get_model(), pc873xx_get_base());
-
-		/* Enabling things in the Super IO chip doesn't actually
-		 * configure and enable things, the legacy drivers still
-		 * need to do the actual configuration and enabling.
-		 * This only unblocks them.
-		 */
-
-#if !defined(CONFIG_ALPHA_AVANTI)
-		/* Don't bother on the Avanti family.
-		 * None of them had on-board IDE.
-		 */
-		pc873xx_enable_ide();
-#endif
-		pc873xx_enable_epp19();
-	}
-}
-
-static inline void __init
-alphabook1_init_pci(void)
-{
-	struct pci_dev *dev;
-	unsigned char orig, config;
-
-	common_init_pci();
-	sio_pci_route();
-
-	/*
-	 * On the AlphaBook1, the PCMCIA chip (Cirrus 6729)
-	 * is sensitive to PCI bus bursts, so we must DISABLE
-	 * burst mode for the NCR 8xx SCSI... :-(
-	 *
-	 * Note that the NCR810 SCSI driver must preserve the
-	 * setting of the bit in order for this to work.  At the
-	 * moment (2.0.29), ncr53c8xx.c does NOT do this, but
-	 * 53c7,8xx.c DOES.
-	 */
-
-	dev = NULL;
-	while ((dev = pci_get_device(PCI_VENDOR_ID_NCR, PCI_ANY_ID, dev))) {
-		if (dev->device == PCI_DEVICE_ID_NCR_53C810
-		    || dev->device == PCI_DEVICE_ID_NCR_53C815
-		    || dev->device == PCI_DEVICE_ID_NCR_53C820
-		    || dev->device == PCI_DEVICE_ID_NCR_53C825) {
-			unsigned long io_port;
-			unsigned char ctest4;
-
-			io_port = dev->resource[0].start;
-			ctest4 = inb(io_port+0x21);
-			if (!(ctest4 & 0x80)) {
-				printk("AlphaBook1 NCR init: setting"
-				       " burst disable\n");
-				outb(ctest4 | 0x80, io_port+0x21);
-			}
-                }
-	}
-
-	/* Do not set *ANY* level triggers for AlphaBook1. */
-	sio_fixup_irq_levels(0);
-
-	/* Make sure that register PR1 indicates 1Mb mem */
-	outb(0x0f, 0x3ce); orig = inb(0x3cf);   /* read PR5  */
-	outb(0x0f, 0x3ce); outb(0x05, 0x3cf);   /* unlock PR0-4 */
-	outb(0x0b, 0x3ce); config = inb(0x3cf); /* read PR1 */
-	if ((config & 0xc0) != 0xc0) {
-		printk("AlphaBook1 VGA init: setting 1Mb memory\n");
-		config |= 0xc0;
-		outb(0x0b, 0x3ce); outb(config, 0x3cf); /* write PR1 */
-	}
-	outb(0x0f, 0x3ce); outb(orig, 0x3cf); /* (re)lock PR0-4 */
-}
-
-void
-sio_kill_arch(int mode)
-{
-#if defined(ALPHA_RESTORE_SRM_SETUP)
-	/* Since we cannot read the PCI DMA Window CSRs, we
-	 * cannot restore them here.
-	 *
-	 * However, we CAN read the PIRQ route register, so restore it
-	 * now...
-	 */
- 	pci_bus_write_config_dword(pci_isa_hose->bus, PCI_DEVFN(7, 0), 0x60,
-				   saved_config.orig_route_tab);
-#endif
-}
-
-
-/*
- * The System Vectors
- */
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_BOOK1)
-struct alpha_machine_vector alphabook1_mv __initmv = {
-	.vector_name		= "AlphaBook1",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_LCA_IO,
-	.machine_check		= lca_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 16,
-	.device_interrupt	= isa_device_interrupt,
-
-	.init_arch		= alphabook1_init_arch,
-	.init_irq		= sio_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= alphabook1_init_pci,
-	.kill_arch		= sio_kill_arch,
-	.pci_map_irq		= noname_map_irq,
-	.pci_swizzle		= common_swizzle,
-
-	.sys = { .sio = {
-		/* NCR810 SCSI is 14, PCMCIA controller is 15.  */
-		.route_tab	= 0x0e0f0a0a,
-	}}
-};
-ALIAS_MV(alphabook1)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_AVANTI)
-struct alpha_machine_vector avanti_mv __initmv = {
-	.vector_name		= "Avanti",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_APECS_IO,
-	.machine_check		= apecs_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 16,
-	.device_interrupt	= isa_device_interrupt,
-
-	.init_arch		= apecs_init_arch,
-	.init_irq		= sio_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= noname_init_pci,
-	.kill_arch		= sio_kill_arch,
-	.pci_map_irq		= noname_map_irq,
-	.pci_swizzle		= common_swizzle,
-
-	.sys = { .sio = {
-		.route_tab	= 0x0b0a050f, /* leave 14 for IDE, 9 for SND */
-	}}
-};
-ALIAS_MV(avanti)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_NONAME)
-struct alpha_machine_vector noname_mv __initmv = {
-	.vector_name		= "Noname",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_LCA_IO,
-	.machine_check		= lca_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 16,
-	.device_interrupt	= srm_device_interrupt,
-
-	.init_arch		= lca_init_arch,
-	.init_irq		= sio_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= noname_init_pci,
-	.kill_arch		= sio_kill_arch,
-	.pci_map_irq		= noname_map_irq,
-	.pci_swizzle		= common_swizzle,
-
-	.sys = { .sio = {
-		/* For UDB, the only available PCI slot must not map to IRQ 9,
-		   since that's the builtin MSS sound chip. That PCI slot
-		   will map to PIRQ1 (for INTA at least), so we give it IRQ 15
-		   instead.
-
-		   Unfortunately we have to do this for NONAME as well, since
-		   they are co-indicated when the platform type "Noname" is
-		   selected... :-(  */
-
-		.route_tab	= 0x0b0a0f0d,
-	}}
-};
-ALIAS_MV(noname)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_P2K)
-struct alpha_machine_vector p2k_mv __initmv = {
-	.vector_name		= "Platform2000",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_LCA_IO,
-	.machine_check		= lca_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 16,
-	.device_interrupt	= srm_device_interrupt,
-
-	.init_arch		= lca_init_arch,
-	.init_irq		= sio_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= noname_init_pci,
-	.kill_arch		= sio_kill_arch,
-	.pci_map_irq		= p2k_map_irq,
-	.pci_swizzle		= common_swizzle,
-
-	.sys = { .sio = {
-		.route_tab	= 0x0b0a090f,
-	}}
-};
-ALIAS_MV(p2k)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_XL)
-struct alpha_machine_vector xl_mv __initmv = {
-	.vector_name		= "XL",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_APECS_IO,
-	.machine_check		= apecs_machine_check,
-	.max_isa_dma_address	= ALPHA_XL_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= XL_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 16,
-	.device_interrupt	= isa_device_interrupt,
-
-	.init_arch		= apecs_init_arch,
-	.init_irq		= sio_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= noname_init_pci,
-	.kill_arch		= sio_kill_arch,
-	.pci_map_irq		= noname_map_irq,
-	.pci_swizzle		= common_swizzle,
-
-	.sys = { .sio = {
-		.route_tab	= 0x0b0a090f,
-	}}
-};
-ALIAS_MV(xl)
-#endif
diff --git a/arch/alpha/kernel/syscalls/Makefile b/arch/alpha/kernel/syscalls/Makefile
index 6713c65a25e1..b265e4bc16c2 100644
--- a/arch/alpha/kernel/syscalls/Makefile
+++ b/arch/alpha/kernel/syscalls/Makefile
@@ -2,8 +2,7 @@
 kapi := arch/$(SRCARCH)/include/generated/asm
 uapi := arch/$(SRCARCH)/include/generated/uapi/asm
 
-_dummy := $(shell [ -d '$(uapi)' ] || mkdir -p '$(uapi)')	\
-	  $(shell [ -d '$(kapi)' ] || mkdir -p '$(kapi)')
+$(shell mkdir -p $(uapi) $(kapi))
 
 syscall := $(src)/syscall.tbl
 syshdr := $(srctree)/scripts/syscallhdr.sh
diff --git a/arch/alpha/kernel/syscalls/syscall.tbl b/arch/alpha/kernel/syscalls/syscall.tbl
index e4a041cd5715..3fed97478058 100644
--- a/arch/alpha/kernel/syscalls/syscall.tbl
+++ b/arch/alpha/kernel/syscalls/syscall.tbl
@@ -125,8 +125,8 @@
 116	common	osf_gettimeofday		sys_osf_gettimeofday
 117	common	osf_getrusage			sys_osf_getrusage
 118	common	getsockopt			sys_getsockopt
-120	common	readv				sys_osf_readv
-121	common	writev				sys_osf_writev
+120	common	readv				sys_readv
+121	common	writev				sys_writev
 122	common	osf_settimeofday		sys_osf_settimeofday
 123	common	fchown				sys_fchown
 124	common	fchmod				sys_fchmod
@@ -334,7 +334,7 @@
 401	common	io_submit			sys_io_submit
 402	common	io_cancel			sys_io_cancel
 405	common	exit_group			sys_exit_group
-406	common	lookup_dcookie			sys_lookup_dcookie
+406	common	lookup_dcookie			sys_ni_syscall
 407	common	epoll_create			sys_epoll_create
 408	common	epoll_ctl			sys_epoll_ctl
 409	common	epoll_wait			sys_epoll_wait
@@ -474,7 +474,7 @@
 542	common	fsmount				sys_fsmount
 543	common	fspick				sys_fspick
 544	common	pidfd_open			sys_pidfd_open
-# 545 reserved for clone3
+545	common	clone3				alpha_clone3
 546	common	close_range			sys_close_range
 547	common	openat2				sys_openat2
 548	common	pidfd_getfd			sys_pidfd_getfd
@@ -488,3 +488,25 @@
 556	common	landlock_restrict_self		sys_landlock_restrict_self
 # 557 reserved for memfd_secret
 558	common	process_mrelease		sys_process_mrelease
+559	common  futex_waitv                     sys_futex_waitv
+560	common	set_mempolicy_home_node		sys_ni_syscall
+561	common	cachestat			sys_cachestat
+562	common	fchmodat2			sys_fchmodat2
+563	common	map_shadow_stack		sys_map_shadow_stack
+564	common	futex_wake			sys_futex_wake
+565	common	futex_wait			sys_futex_wait
+566	common	futex_requeue			sys_futex_requeue
+567	common	statmount			sys_statmount
+568	common	listmount			sys_listmount
+569	common	lsm_get_self_attr		sys_lsm_get_self_attr
+570	common	lsm_set_self_attr		sys_lsm_set_self_attr
+571	common	lsm_list_modules		sys_lsm_list_modules
+572	common  mseal				sys_mseal
+573	common	setxattrat			sys_setxattrat
+574	common	getxattrat			sys_getxattrat
+575	common	listxattrat			sys_listxattrat
+576	common	removexattrat			sys_removexattrat
+577	common	open_tree_attr			sys_open_tree_attr
+578	common	file_getattr			sys_file_getattr
+579	common	file_setattr			sys_file_setattr
+580	common	listns				sys_listns
diff --git a/arch/alpha/kernel/termios.c b/arch/alpha/kernel/termios.c
new file mode 100644
index 000000000000..a4c29a22edf7
--- /dev/null
+++ b/arch/alpha/kernel/termios.c
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/termios_internal.h>
+
+int user_termio_to_kernel_termios(struct ktermios *termios,
+						struct termio __user *termio)
+{
+	struct termio v;
+	bool canon;
+
+	if (copy_from_user(&v, termio, sizeof(struct termio)))
+		return -EFAULT;
+
+	termios->c_iflag = (0xffff0000 & termios->c_iflag) | v.c_iflag;
+	termios->c_oflag = (0xffff0000 & termios->c_oflag) | v.c_oflag;
+	termios->c_cflag = (0xffff0000 & termios->c_cflag) | v.c_cflag;
+	termios->c_lflag = (0xffff0000 & termios->c_lflag) | v.c_lflag;
+	termios->c_line = (0xffff0000 & termios->c_lflag) | v.c_line;
+
+	canon = v.c_lflag & ICANON;
+	termios->c_cc[VINTR]  = v.c_cc[_VINTR];
+	termios->c_cc[VQUIT]  = v.c_cc[_VQUIT];
+	termios->c_cc[VERASE] = v.c_cc[_VERASE];
+	termios->c_cc[VKILL]  = v.c_cc[_VKILL];
+	termios->c_cc[VEOL2]  = v.c_cc[_VEOL2];
+	termios->c_cc[VSWTC]  = v.c_cc[_VSWTC];
+	termios->c_cc[canon ? VEOF : VMIN]  = v.c_cc[_VEOF];
+	termios->c_cc[canon ? VEOL : VTIME] = v.c_cc[_VEOL];
+
+	return 0;
+}
+
+int kernel_termios_to_user_termio(struct termio __user *termio,
+						struct ktermios *termios)
+{
+	struct termio v;
+	bool canon;
+
+	memset(&v, 0, sizeof(struct termio));
+	v.c_iflag = termios->c_iflag;
+	v.c_oflag = termios->c_oflag;
+	v.c_cflag = termios->c_cflag;
+	v.c_lflag = termios->c_lflag;
+	v.c_line = termios->c_line;
+
+	canon = v.c_lflag & ICANON;
+	v.c_cc[_VINTR]  = termios->c_cc[VINTR];
+	v.c_cc[_VQUIT]  = termios->c_cc[VQUIT];
+	v.c_cc[_VERASE] = termios->c_cc[VERASE];
+	v.c_cc[_VKILL]  = termios->c_cc[VKILL];
+	v.c_cc[_VEOF]   = termios->c_cc[canon ? VEOF : VMIN];
+	v.c_cc[_VEOL]   = termios->c_cc[canon ? VEOL : VTIME];
+	v.c_cc[_VEOL2]  = termios->c_cc[VEOL2];
+	v.c_cc[_VSWTC]  = termios->c_cc[VSWTC];
+
+	return copy_to_user(termio, &v, sizeof(struct termio));
+}
diff --git a/arch/alpha/kernel/traps.c b/arch/alpha/kernel/traps.c
index e805106409f7..7004397937cf 100644
--- a/arch/alpha/kernel/traps.c
+++ b/arch/alpha/kernel/traps.c
@@ -9,6 +9,7 @@
  * This file initializes the trap entry points
  */
 
+#include <linux/cpu.h>
 #include <linux/jiffies.h>
 #include <linux/mm.h>
 #include <linux/sched/signal.h>
@@ -21,7 +22,7 @@
 
 #include <asm/gentrap.h>
 #include <linux/uaccess.h>
-#include <asm/unaligned.h>
+#include <linux/unaligned.h>
 #include <asm/sysinfo.h>
 #include <asm/hwrpb.h>
 #include <asm/mmu_context.h>
@@ -29,39 +30,6 @@
 
 #include "proto.h"
 
-/* Work-around for some SRMs which mishandle opDEC faults.  */
-
-static int opDEC_fix;
-
-static void
-opDEC_check(void)
-{
-	__asm__ __volatile__ (
-	/* Load the address of... */
-	"	br	$16, 1f\n"
-	/* A stub instruction fault handler.  Just add 4 to the
-	   pc and continue.  */
-	"	ldq	$16, 8($sp)\n"
-	"	addq	$16, 4, $16\n"
-	"	stq	$16, 8($sp)\n"
-	"	call_pal %[rti]\n"
-	/* Install the instruction fault handler.  */
-	"1:	lda	$17, 3\n"
-	"	call_pal %[wrent]\n"
-	/* With that in place, the fault from the round-to-minf fp
-	   insn will arrive either at the "lda 4" insn (bad) or one
-	   past that (good).  This places the correct fixup in %0.  */
-	"	lda %[fix], 0\n"
-	"	cvttq/svm $f31,$f31\n"
-	"	lda %[fix], 4"
-	: [fix] "=r" (opDEC_fix)
-	: [rti] "n" (PAL_rti), [wrent] "n" (PAL_wrent)
-	: "$0", "$1", "$16", "$17", "$22", "$23", "$24", "$25");
-
-	if (opDEC_fix)
-		printk("opDEC fixup enabled.\n");
-}
-
 void
 dik_show_regs(struct pt_regs *regs, unsigned long *r9_15)
 {
@@ -129,9 +97,7 @@ dik_show_trace(unsigned long *sp, const char *loglvl)
 		extern char _stext[], _etext[];
 		unsigned long tmp = *sp;
 		sp++;
-		if (tmp < (unsigned long) &_stext)
-			continue;
-		if (tmp >= (unsigned long) &_etext)
+		if (!is_kernel_text(tmp))
 			continue;
 		printk("%s[<%lx>] %pSR\n", loglvl, tmp, (void *)tmp);
 		if (i > 40) {
@@ -192,7 +158,7 @@ die_if_kernel(char * str, struct pt_regs *regs, long err, unsigned long *r9_15)
 		local_irq_enable();
 		while (1);
 	}
-	do_exit(SIGSEGV);
+	make_task_dead(SIGSEGV);
 }
 
 #ifndef CONFIG_MATHEMU
@@ -235,7 +201,21 @@ do_entIF(unsigned long type, struct pt_regs *regs)
 {
 	int signo, code;
 
-	if ((regs->ps & ~IPL_MAX) == 0) {
+	if (type == 3) { /* FEN fault */
+		/* Irritating users can call PAL_clrfen to disable the
+		   FPU for the process.  The kernel will then trap in
+		   do_switch_stack and undo_switch_stack when we try
+		   to save and restore the FP registers.
+
+		   Given that GCC by default generates code that uses the
+		   FP registers, PAL_clrfen is not useful except for DoS
+		   attacks.  So turn the bleeding FPU back on and be done
+		   with it.  */
+		current_thread_info()->pcb.flags |= 1;
+		__reload_thread(&current_thread_info()->pcb);
+		return;
+	}
+	if (!user_mode(regs)) {
 		if (type == 1) {
 			const unsigned int *data
 			  = (const unsigned int *) regs->pc;
@@ -340,48 +320,8 @@ do_entIF(unsigned long type, struct pt_regs *regs)
 		return;
 
 	      case 4: /* opDEC */
-		if (implver() == IMPLVER_EV4) {
-			long si_code;
-
-			/* The some versions of SRM do not handle
-			   the opDEC properly - they return the PC of the
-			   opDEC fault, not the instruction after as the
-			   Alpha architecture requires.  Here we fix it up.
-			   We do this by intentionally causing an opDEC
-			   fault during the boot sequence and testing if
-			   we get the correct PC.  If not, we set a flag
-			   to correct it every time through.  */
-			regs->pc += opDEC_fix; 
-			
-			/* EV4 does not implement anything except normal
-			   rounding.  Everything else will come here as
-			   an illegal instruction.  Emulate them.  */
-			si_code = alpha_fp_emul(regs->pc - 4);
-			if (si_code == 0)
-				return;
-			if (si_code > 0) {
-				send_sig_fault_trapno(SIGFPE, si_code,
-						      (void __user *) regs->pc,
-						      0, current);
-				return;
-			}
-		}
 		break;
 
-	      case 3: /* FEN fault */
-		/* Irritating users can call PAL_clrfen to disable the
-		   FPU for the process.  The kernel will then trap in
-		   do_switch_stack and undo_switch_stack when we try
-		   to save and restore the FP registers.
-
-		   Given that GCC by default generates code that uses the
-		   FP registers, PAL_clrfen is not useful except for DoS
-		   attacks.  So turn the bleeding FPU back on and be done
-		   with it.  */
-		current_thread_info()->pcb.flags |= 1;
-		__reload_thread(&current_thread_info()->pcb);
-		return;
-
 	      case 5: /* illoc */
 	      default: /* unexpected instruction-fault type */
 		      ;
@@ -577,7 +517,7 @@ do_entUna(void * va, unsigned long opcode, unsigned long reg,
 
 	printk("Bad unaligned kernel access at %016lx: %p %lx %lu\n",
 		pc, va, opcode, reg);
-	do_exit(SIGSEGV);
+	make_task_dead(SIGSEGV);
 
 got_exception:
 	/* Ok, we caught the exception, but we don't want it.  Is there
@@ -632,7 +572,7 @@ got_exception:
 		local_irq_enable();
 		while (1);
 	}
-	do_exit(SIGSEGV);
+	make_task_dead(SIGSEGV);
 }
 
 /*
@@ -709,7 +649,7 @@ s_reg_to_mem (unsigned long s_reg)
 static int unauser_reg_offsets[32] = {
 	R(r0), R(r1), R(r2), R(r3), R(r4), R(r5), R(r6), R(r7), R(r8),
 	/* r9 ... r15 are stored in front of regs.  */
-	-56, -48, -40, -32, -24, -16, -8,
+	-64, -56, -48, -40, -32, -24, -16,	/* padding at -8 */
 	R(r16), R(r17), R(r18),
 	R(r19), R(r20), R(r21), R(r22), R(r23), R(r24), R(r25), R(r26),
 	R(r27), R(r28), R(gp),
@@ -980,11 +920,6 @@ trap_init(void)
 	register unsigned long gptr __asm__("$29");
 	wrkgp(gptr);
 
-	/* Hack for Multia (UDB) and JENSEN: some of their SRMs have
-	   a bug in the handling of the opDEC fault.  Fix it up if so.  */
-	if (implver() == IMPLVER_EV4)
-		opDEC_check();
-
 	wrent(entArith, 1);
 	wrent(entMM, 2);
 	wrent(entIF, 3);
diff --git a/arch/alpha/kernel/vmlinux.lds.S b/arch/alpha/kernel/vmlinux.lds.S
index 5b78d640725d..2efa7dfc798a 100644
--- a/arch/alpha/kernel/vmlinux.lds.S
+++ b/arch/alpha/kernel/vmlinux.lds.S
@@ -27,7 +27,6 @@ SECTIONS
 		HEAD_TEXT
 		TEXT_TEXT
 		SCHED_TEXT
-		CPUIDLE_TEXT
 		LOCK_TEXT
 		*(.fixup)
 		*(.gnu.warning)
diff --git a/arch/alpha/lib/Makefile b/arch/alpha/lib/Makefile
index 1cc74f7b50ef..84046e730e6d 100644
--- a/arch/alpha/lib/Makefile
+++ b/arch/alpha/lib/Makefile
@@ -4,7 +4,6 @@
 #
 
 asflags-y := $(KBUILD_CFLAGS)
-ccflags-y := -Werror
 
 # Many of these routines have implementations tuned for ev6.
 # Choose them iff we're targeting ev6 specifically.
@@ -45,17 +44,3 @@ AFLAGS___remlu.o =       -DREM -DINTSIZE
 $(addprefix $(obj)/,__divqu.o __remqu.o __divlu.o __remlu.o): \
 						$(src)/$(ev6-y)divide.S FORCE
 	$(call if_changed_rule,as_o_S)
-
-# There are direct branches between {str*cpy,str*cat} and stx*cpy.
-# Ensure the branches are within range by merging these objects.
-
-LDFLAGS_stycpy.o := -r
-LDFLAGS_styncpy.o := -r
-
-$(obj)/stycpy.o: $(obj)/strcpy.o $(obj)/$(ev67-y)strcat.o \
-		 $(obj)/$(ev6-y)stxcpy.o FORCE
-	$(call if_changed,ld)
-
-$(obj)/styncpy.o: $(obj)/strncpy.o $(obj)/$(ev67-y)strncat.o \
-		 $(obj)/$(ev6-y)stxncpy.o FORCE
-	$(call if_changed,ld)
diff --git a/arch/alpha/lib/callback_srm.S b/arch/alpha/lib/callback_srm.S
index b13c4a231f1b..36b63f295170 100644
--- a/arch/alpha/lib/callback_srm.S
+++ b/arch/alpha/lib/callback_srm.S
@@ -3,8 +3,8 @@
  *	arch/alpha/lib/callback_srm.S
  */
 
+#include <linux/export.h>
 #include <asm/console.h>
-#include <asm/export.h>
 
 .text
 #define HWRPB_CRB_OFFSET 0xc0
diff --git a/arch/alpha/lib/checksum.c b/arch/alpha/lib/checksum.c
index 3f35c3ed6948..27b2a9edf3cc 100644
--- a/arch/alpha/lib/checksum.c
+++ b/arch/alpha/lib/checksum.c
@@ -12,8 +12,10 @@
  
 #include <linux/module.h>
 #include <linux/string.h>
+#include <net/checksum.h>
 
 #include <asm/byteorder.h>
+#include <asm/checksum.h>
 
 static inline unsigned short from64to16(unsigned long x)
 {
diff --git a/arch/alpha/lib/clear_page.S b/arch/alpha/lib/clear_page.S
index ce02de7b0493..af70ee309a33 100644
--- a/arch/alpha/lib/clear_page.S
+++ b/arch/alpha/lib/clear_page.S
@@ -4,7 +4,7 @@
  *
  * Zero an entire page.
  */
-#include <asm/export.h>
+#include <linux/export.h>
 	.text
 	.align 4
 	.global clear_page
diff --git a/arch/alpha/lib/clear_user.S b/arch/alpha/lib/clear_user.S
index db6c6ca45896..848eb60a0010 100644
--- a/arch/alpha/lib/clear_user.S
+++ b/arch/alpha/lib/clear_user.S
@@ -10,7 +10,7 @@
  * a successful copy).  There is also some rather minor exception setup
  * stuff.
  */
-#include <asm/export.h>
+#include <linux/export.h>
 
 /* Allow an exception for an insn; exit if we get one.  */
 #define EX(x,y...)			\
diff --git a/arch/alpha/lib/copy_page.S b/arch/alpha/lib/copy_page.S
index 5439a30c77d0..1c444fdad9a5 100644
--- a/arch/alpha/lib/copy_page.S
+++ b/arch/alpha/lib/copy_page.S
@@ -4,7 +4,7 @@
  *
  * Copy an entire page.
  */
-#include <asm/export.h>
+#include <linux/export.h>
 	.text
 	.align 4
 	.global copy_page
diff --git a/arch/alpha/lib/copy_user.S b/arch/alpha/lib/copy_user.S
index 32ab0344b185..ef18faafcad6 100644
--- a/arch/alpha/lib/copy_user.S
+++ b/arch/alpha/lib/copy_user.S
@@ -12,7 +12,7 @@
  * exception setup stuff..
  */
 
-#include <asm/export.h>
+#include <linux/export.h>
 
 /* Allow an exception for an insn; exit if we get one.  */
 #define EXI(x,y...)			\
diff --git a/arch/alpha/lib/csum_ipv6_magic.S b/arch/alpha/lib/csum_ipv6_magic.S
index c7b213ab01ab..273c426c3859 100644
--- a/arch/alpha/lib/csum_ipv6_magic.S
+++ b/arch/alpha/lib/csum_ipv6_magic.S
@@ -13,7 +13,7 @@
  * added by Ivan Kokshaysky <ink@jurassic.park.msu.ru>
  */
 
-#include <asm/export.h>
+#include <linux/export.h>
 	.globl csum_ipv6_magic
 	.align 4
 	.ent csum_ipv6_magic
diff --git a/arch/alpha/lib/csum_partial_copy.c b/arch/alpha/lib/csum_partial_copy.c
index 1931a04af85a..4d180d96f09e 100644
--- a/arch/alpha/lib/csum_partial_copy.c
+++ b/arch/alpha/lib/csum_partial_copy.c
@@ -353,7 +353,6 @@ csum_and_copy_from_user(const void __user *src, void *dst, int len)
 		return 0;
 	return __csum_and_copy(src, dst, len);
 }
-EXPORT_SYMBOL(csum_and_copy_from_user);
 
 __wsum
 csum_partial_copy_nocheck(const void *src, void *dst, int len)
diff --git a/arch/alpha/lib/divide.S b/arch/alpha/lib/divide.S
index 2b60eb45e50b..db01840d76ec 100644
--- a/arch/alpha/lib/divide.S
+++ b/arch/alpha/lib/divide.S
@@ -46,7 +46,7 @@
  *	$28 - compare status
  */
 
-#include <asm/export.h>
+#include <linux/export.h>
 #define halt .long 0
 
 /*
diff --git a/arch/alpha/lib/ev6-clear_page.S b/arch/alpha/lib/ev6-clear_page.S
index 325864c81586..a534d9ff7161 100644
--- a/arch/alpha/lib/ev6-clear_page.S
+++ b/arch/alpha/lib/ev6-clear_page.S
@@ -4,7 +4,7 @@
  *
  * Zero an entire page.
  */
-#include <asm/export.h>
+#include <linux/export.h>
         .text
         .align 4
         .global clear_page
diff --git a/arch/alpha/lib/ev6-clear_user.S b/arch/alpha/lib/ev6-clear_user.S
index 7e644f83cdf2..af776cc45f91 100644
--- a/arch/alpha/lib/ev6-clear_user.S
+++ b/arch/alpha/lib/ev6-clear_user.S
@@ -29,7 +29,7 @@
  *	want to leave a hole (and we also want to avoid repeating lots of work)
  */
 
-#include <asm/export.h>
+#include <linux/export.h>
 /* Allow an exception for an insn; exit if we get one.  */
 #define EX(x,y...)			\
 	99: x,##y;			\
diff --git a/arch/alpha/lib/ev6-copy_page.S b/arch/alpha/lib/ev6-copy_page.S
index fd7212c8dcf1..36be5113b7b7 100644
--- a/arch/alpha/lib/ev6-copy_page.S
+++ b/arch/alpha/lib/ev6-copy_page.S
@@ -57,7 +57,7 @@
    destination pages are in the dcache, but it is my guess that this is
    less important than the dcache miss case.  */
 
-#include <asm/export.h>
+#include <linux/export.h>
 	.text
 	.align 4
 	.global copy_page
diff --git a/arch/alpha/lib/ev6-copy_user.S b/arch/alpha/lib/ev6-copy_user.S
index f3e433754397..b9b19710c364 100644
--- a/arch/alpha/lib/ev6-copy_user.S
+++ b/arch/alpha/lib/ev6-copy_user.S
@@ -23,7 +23,7 @@
  *	L	- lower subcluster; L0 - subcluster L0; L1 - subcluster L1
  */
 
-#include <asm/export.h>
+#include <linux/export.h>
 /* Allow an exception for an insn; exit if we get one.  */
 #define EXI(x,y...)			\
 	99: x,##y;			\
diff --git a/arch/alpha/lib/ev6-csum_ipv6_magic.S b/arch/alpha/lib/ev6-csum_ipv6_magic.S
index 9a73f90700a1..2ee548be98e3 100644
--- a/arch/alpha/lib/ev6-csum_ipv6_magic.S
+++ b/arch/alpha/lib/ev6-csum_ipv6_magic.S
@@ -53,7 +53,7 @@
  * may cause additional delay in rare cases (load-load replay traps).
  */
 
-#include <asm/export.h>
+#include <linux/export.h>
 	.globl csum_ipv6_magic
 	.align 4
 	.ent csum_ipv6_magic
diff --git a/arch/alpha/lib/ev6-divide.S b/arch/alpha/lib/ev6-divide.S
index 137ff1a07356..b73a6d26362e 100644
--- a/arch/alpha/lib/ev6-divide.S
+++ b/arch/alpha/lib/ev6-divide.S
@@ -56,7 +56,7 @@
  * Try not to change the actual algorithm if possible for consistency.
  */
 
-#include <asm/export.h>
+#include <linux/export.h>
 #define halt .long 0
 
 /*
diff --git a/arch/alpha/lib/ev6-memchr.S b/arch/alpha/lib/ev6-memchr.S
index 56bf9e14eeee..f75ba43e61e3 100644
--- a/arch/alpha/lib/ev6-memchr.S
+++ b/arch/alpha/lib/ev6-memchr.S
@@ -28,7 +28,7 @@
  *	L	- lower subcluster; L0 - subcluster L0; L1 - subcluster L1
  * Try not to change the actual algorithm if possible for consistency.
  */
-#include <asm/export.h>
+#include <linux/export.h>
         .set noreorder
         .set noat
 
diff --git a/arch/alpha/lib/ev6-memcpy.S b/arch/alpha/lib/ev6-memcpy.S
index ffbd056b6eb2..3ef43c26c8af 100644
--- a/arch/alpha/lib/ev6-memcpy.S
+++ b/arch/alpha/lib/ev6-memcpy.S
@@ -20,7 +20,7 @@
  * Temp usage notes:
  *	$1,$2,		- scratch
  */
-#include <asm/export.h>
+#include <linux/export.h>
 	.set noreorder
 	.set noat
 
diff --git a/arch/alpha/lib/ev6-memset.S b/arch/alpha/lib/ev6-memset.S
index 1cfcfbbea6f0..89d7809da4cc 100644
--- a/arch/alpha/lib/ev6-memset.S
+++ b/arch/alpha/lib/ev6-memset.S
@@ -27,7 +27,7 @@
  * as fixes will need to be made in multiple places.  The performance gain
  * is worth it.
  */
-#include <asm/export.h>
+#include <linux/export.h>
 	.set noat
 	.set noreorder
 .text
diff --git a/arch/alpha/lib/ev67-strcat.S b/arch/alpha/lib/ev67-strcat.S
index ec3096a9e8d4..f8c7305b11d6 100644
--- a/arch/alpha/lib/ev67-strcat.S
+++ b/arch/alpha/lib/ev67-strcat.S
@@ -20,7 +20,7 @@
  * string once.
  */
 
-#include <asm/export.h>
+#include <linux/export.h>
 	.text
 
 	.align 4
diff --git a/arch/alpha/lib/ev67-strchr.S b/arch/alpha/lib/ev67-strchr.S
index fbf89e0b6dc3..97a7cb475309 100644
--- a/arch/alpha/lib/ev67-strchr.S
+++ b/arch/alpha/lib/ev67-strchr.S
@@ -16,7 +16,7 @@
  *	L	- lower subcluster; L0 - subcluster L0; L1 - subcluster L1
  * Try not to change the actual algorithm if possible for consistency.
  */
-#include <asm/export.h>
+#include <linux/export.h>
 #include <asm/regdef.h>
 
 	.set noreorder
diff --git a/arch/alpha/lib/ev67-strlen.S b/arch/alpha/lib/ev67-strlen.S
index b73106ffbbc7..3d9078807ab4 100644
--- a/arch/alpha/lib/ev67-strlen.S
+++ b/arch/alpha/lib/ev67-strlen.S
@@ -18,7 +18,7 @@
  *	U	- upper subcluster; U0 - subcluster U0; U1 - subcluster U1
  *	L	- lower subcluster; L0 - subcluster L0; L1 - subcluster L1
  */
-#include <asm/export.h>
+#include <linux/export.h>
 	.set noreorder
 	.set noat
 
diff --git a/arch/alpha/lib/ev67-strncat.S b/arch/alpha/lib/ev67-strncat.S
index ceb0ca528789..8f313233e3a7 100644
--- a/arch/alpha/lib/ev67-strncat.S
+++ b/arch/alpha/lib/ev67-strncat.S
@@ -21,7 +21,7 @@
  * Try not to change the actual algorithm if possible for consistency.
  */
 
-#include <asm/export.h>
+#include <linux/export.h>
 	.text
 
 	.align 4
diff --git a/arch/alpha/lib/ev67-strrchr.S b/arch/alpha/lib/ev67-strrchr.S
index 7f80e398530f..ae7355f9ec56 100644
--- a/arch/alpha/lib/ev67-strrchr.S
+++ b/arch/alpha/lib/ev67-strrchr.S
@@ -19,7 +19,7 @@
  *	L	- lower subcluster; L0 - subcluster L0; L1 - subcluster L1
  */
 
-#include <asm/export.h>
+#include <linux/export.h>
 #include <asm/regdef.h>
 
 	.set noreorder
diff --git a/arch/alpha/lib/fpreg.c b/arch/alpha/lib/fpreg.c
index 34fea465645b..3d32165043f8 100644
--- a/arch/alpha/lib/fpreg.c
+++ b/arch/alpha/lib/fpreg.c
@@ -7,6 +7,9 @@
 
 #include <linux/compiler.h>
 #include <linux/export.h>
+#include <linux/preempt.h>
+#include <asm/fpu.h>
+#include <asm/thread_info.h>
 
 #if defined(CONFIG_ALPHA_EV6) || defined(CONFIG_ALPHA_EV67)
 #define STT(reg,val)  asm volatile ("ftoit $f"#reg",%0" : "=r"(val));
@@ -19,7 +22,12 @@ alpha_read_fp_reg (unsigned long reg)
 {
 	unsigned long val;
 
-	switch (reg) {
+	if (unlikely(reg >= 32))
+		return 0;
+	preempt_disable();
+	if (current_thread_info()->status & TS_SAVED_FP)
+		val = current_thread_info()->fp[reg];
+	else switch (reg) {
 	      case  0: STT( 0, val); break;
 	      case  1: STT( 1, val); break;
 	      case  2: STT( 2, val); break;
@@ -52,8 +60,8 @@ alpha_read_fp_reg (unsigned long reg)
 	      case 29: STT(29, val); break;
 	      case 30: STT(30, val); break;
 	      case 31: STT(31, val); break;
-	      default: return 0;
 	}
+	preempt_enable();
 	return val;
 }
 EXPORT_SYMBOL(alpha_read_fp_reg);
@@ -67,7 +75,14 @@ EXPORT_SYMBOL(alpha_read_fp_reg);
 void
 alpha_write_fp_reg (unsigned long reg, unsigned long val)
 {
-	switch (reg) {
+	if (unlikely(reg >= 32))
+		return;
+
+	preempt_disable();
+	if (current_thread_info()->status & TS_SAVED_FP) {
+		current_thread_info()->status |= TS_RESTORE_FP;
+		current_thread_info()->fp[reg] = val;
+	} else switch (reg) {
 	      case  0: LDT( 0, val); break;
 	      case  1: LDT( 1, val); break;
 	      case  2: LDT( 2, val); break;
@@ -101,6 +116,7 @@ alpha_write_fp_reg (unsigned long reg, unsigned long val)
 	      case 30: LDT(30, val); break;
 	      case 31: LDT(31, val); break;
 	}
+	preempt_enable();
 }
 EXPORT_SYMBOL(alpha_write_fp_reg);
 
@@ -115,7 +131,14 @@ alpha_read_fp_reg_s (unsigned long reg)
 {
 	unsigned long val;
 
-	switch (reg) {
+	if (unlikely(reg >= 32))
+		return 0;
+
+	preempt_disable();
+	if (current_thread_info()->status & TS_SAVED_FP) {
+		LDT(0, current_thread_info()->fp[reg]);
+		STS(0, val);
+	} else switch (reg) {
 	      case  0: STS( 0, val); break;
 	      case  1: STS( 1, val); break;
 	      case  2: STS( 2, val); break;
@@ -148,8 +171,8 @@ alpha_read_fp_reg_s (unsigned long reg)
 	      case 29: STS(29, val); break;
 	      case 30: STS(30, val); break;
 	      case 31: STS(31, val); break;
-	      default: return 0;
 	}
+	preempt_enable();
 	return val;
 }
 EXPORT_SYMBOL(alpha_read_fp_reg_s);
@@ -163,7 +186,15 @@ EXPORT_SYMBOL(alpha_read_fp_reg_s);
 void
 alpha_write_fp_reg_s (unsigned long reg, unsigned long val)
 {
-	switch (reg) {
+	if (unlikely(reg >= 32))
+		return;
+
+	preempt_disable();
+	if (current_thread_info()->status & TS_SAVED_FP) {
+		current_thread_info()->status |= TS_RESTORE_FP;
+		LDS(0, val);
+		STT(0, current_thread_info()->fp[reg]);
+	} else switch (reg) {
 	      case  0: LDS( 0, val); break;
 	      case  1: LDS( 1, val); break;
 	      case  2: LDS( 2, val); break;
@@ -197,5 +228,6 @@ alpha_write_fp_reg_s (unsigned long reg, unsigned long val)
 	      case 30: LDS(30, val); break;
 	      case 31: LDS(31, val); break;
 	}
+	preempt_enable();
 }
 EXPORT_SYMBOL(alpha_write_fp_reg_s);
diff --git a/arch/alpha/lib/memchr.S b/arch/alpha/lib/memchr.S
index c13d3eca2e05..45366e32feee 100644
--- a/arch/alpha/lib/memchr.S
+++ b/arch/alpha/lib/memchr.S
@@ -31,7 +31,7 @@ For correctness consider that:
       - only minimum number of quadwords may be accessed
       - the third argument is an unsigned long
 */
-#include <asm/export.h>
+#include <linux/export.h>
         .set noreorder
         .set noat
 
diff --git a/arch/alpha/lib/memcpy.c b/arch/alpha/lib/memcpy.c
index cbac3dc6d963..78b6850a9d53 100644
--- a/arch/alpha/lib/memcpy.c
+++ b/arch/alpha/lib/memcpy.c
@@ -18,6 +18,7 @@
 
 #include <linux/types.h>
 #include <linux/export.h>
+#include <linux/string.h>
 
 /*
  * This should be done in one go with ldq_u*2/mask/stq_u. Do it
@@ -150,6 +151,8 @@ static inline void __memcpy_aligned_dn (unsigned long d, unsigned long s,
 	DO_REST_ALIGNED_DN(d,s,n);
 }
 
+#undef memcpy
+
 void * memcpy(void * dest, const void *src, size_t n)
 {
 	if (!(((unsigned long) dest ^ (unsigned long) src) & 7)) {
diff --git a/arch/alpha/lib/memmove.S b/arch/alpha/lib/memmove.S
index 42d1922d0edf..3a27689e3390 100644
--- a/arch/alpha/lib/memmove.S
+++ b/arch/alpha/lib/memmove.S
@@ -7,7 +7,7 @@
  * This is hand-massaged output from the original memcpy.c.  We defer to
  * memcpy whenever possible; the backwards copy loops are not unrolled.
  */
-#include <asm/export.h>        
+#include <linux/export.h>
 	.set noat
 	.set noreorder
 	.text
diff --git a/arch/alpha/lib/memset.S b/arch/alpha/lib/memset.S
index 00393e30df25..9075d6918346 100644
--- a/arch/alpha/lib/memset.S
+++ b/arch/alpha/lib/memset.S
@@ -14,7 +14,7 @@
  * The scheduling comments are according to the EV5 documentation (and done by 
  * hand, so they might well be incorrect, please do tell me about it..)
  */
-#include <asm/export.h>
+#include <linux/export.h>
 	.set noat
 	.set noreorder
 .text
diff --git a/arch/alpha/lib/stacktrace.c b/arch/alpha/lib/stacktrace.c
index 62454a7810e2..2b1176dd5174 100644
--- a/arch/alpha/lib/stacktrace.c
+++ b/arch/alpha/lib/stacktrace.c
@@ -92,7 +92,7 @@ stacktrace(void)
 {
 	instr * ret_pc;
 	instr * prologue = (instr *)stacktrace;
-	register unsigned char * sp __asm__ ("$30");
+	unsigned char *sp = (unsigned char *)current_stack_pointer;
 
 	printk("\tstack trace:\n");
 	do {
diff --git a/arch/alpha/lib/strcat.S b/arch/alpha/lib/strcat.S
index 055877dccd27..62b90ebbcf44 100644
--- a/arch/alpha/lib/strcat.S
+++ b/arch/alpha/lib/strcat.S
@@ -5,7 +5,7 @@
  *
  * Append a null-terminated string from SRC to DST.
  */
-#include <asm/export.h>
+#include <linux/export.h>
 
 	.text
 
diff --git a/arch/alpha/lib/strchr.S b/arch/alpha/lib/strchr.S
index 17871dd00280..68c54ff50dfe 100644
--- a/arch/alpha/lib/strchr.S
+++ b/arch/alpha/lib/strchr.S
@@ -6,7 +6,7 @@
  * Return the address of a given character within a null-terminated
  * string, or null if it is not found.
  */
-#include <asm/export.h>
+#include <linux/export.h>
 #include <asm/regdef.h>
 
 	.set noreorder
diff --git a/arch/alpha/lib/strcpy.S b/arch/alpha/lib/strcpy.S
index cb74ad23a90d..d8773ba77525 100644
--- a/arch/alpha/lib/strcpy.S
+++ b/arch/alpha/lib/strcpy.S
@@ -6,7 +6,7 @@
  * Copy a null-terminated string from SRC to DST.  Return a pointer
  * to the null-terminator in the source.
  */
-#include <asm/export.h>
+#include <linux/export.h>
 	.text
 
 	.align 3
diff --git a/arch/alpha/lib/strlen.S b/arch/alpha/lib/strlen.S
index dd882fe4d7e3..4fc6a6ff24cd 100644
--- a/arch/alpha/lib/strlen.S
+++ b/arch/alpha/lib/strlen.S
@@ -12,7 +12,7 @@
  *	  do this instead of the 9 instructions that
  *	  binary search needs).
  */
-#include <asm/export.h>
+#include <linux/export.h>
 	.set noreorder
 	.set noat
 
diff --git a/arch/alpha/lib/strncat.S b/arch/alpha/lib/strncat.S
index 522fee3e26ac..a913a7c84a39 100644
--- a/arch/alpha/lib/strncat.S
+++ b/arch/alpha/lib/strncat.S
@@ -10,7 +10,7 @@
  * past count, whereas libc may write to count+1.  This follows the generic
  * implementation in lib/string.c and is, IMHO, more sensible.
  */
-#include <asm/export.h>
+#include <linux/export.h>
 	.text
 
 	.align 3
diff --git a/arch/alpha/lib/strncpy.S b/arch/alpha/lib/strncpy.S
index cc57fad8b7ca..cb90cf022df3 100644
--- a/arch/alpha/lib/strncpy.S
+++ b/arch/alpha/lib/strncpy.S
@@ -11,7 +11,7 @@
  * version has cropped that bit o' nastiness as well as assuming that
  * __stxncpy is in range of a branch.
  */
-#include <asm/export.h>
+#include <linux/export.h>
 	.set noat
 	.set noreorder
 
diff --git a/arch/alpha/lib/strrchr.S b/arch/alpha/lib/strrchr.S
index 7650ba99b7e2..dd8e073b6cf2 100644
--- a/arch/alpha/lib/strrchr.S
+++ b/arch/alpha/lib/strrchr.S
@@ -6,7 +6,7 @@
  * Return the address of the last occurrence of a given character
  * within a null-terminated string, or null if it is not found.
  */
-#include <asm/export.h>
+#include <linux/export.h>
 #include <asm/regdef.h>
 
 	.set noreorder
diff --git a/arch/alpha/lib/stycpy.S b/arch/alpha/lib/stycpy.S
new file mode 100644
index 000000000000..32ecd9c5f90d
--- /dev/null
+++ b/arch/alpha/lib/stycpy.S
@@ -0,0 +1,11 @@
+#include "strcpy.S"
+#ifdef CONFIG_ALPHA_EV67
+#include "ev67-strcat.S"
+#else
+#include "strcat.S"
+#endif
+#ifdef CONFIG_ALPHA_EV6
+#include "ev6-stxcpy.S"
+#else
+#include "stxcpy.S"
+#endif
diff --git a/arch/alpha/lib/styncpy.S b/arch/alpha/lib/styncpy.S
new file mode 100644
index 000000000000..72fc2754eb57
--- /dev/null
+++ b/arch/alpha/lib/styncpy.S
@@ -0,0 +1,11 @@
+#include "strncpy.S"
+#ifdef CONFIG_ALPHA_EV67
+#include "ev67-strncat.S"
+#else
+#include "strncat.S"
+#endif
+#ifdef CONFIG_ALPHA_EV6
+#include "ev6-stxncpy.S"
+#else
+#include "stxncpy.S"
+#endif
diff --git a/arch/alpha/lib/udiv-qrnnd.S b/arch/alpha/lib/udiv-qrnnd.S
index b887aa5428e5..96f05918bffe 100644
--- a/arch/alpha/lib/udiv-qrnnd.S
+++ b/arch/alpha/lib/udiv-qrnnd.S
@@ -25,7 +25,7 @@
  # along with GCC; see the file COPYING.  If not, write to the 
  # Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston,
  # MA 02111-1307, USA.
-#include <asm/export.h>
+#include <linux/export.h>
 
         .set noreorder
         .set noat
diff --git a/arch/alpha/math-emu/math.c b/arch/alpha/math-emu/math.c
index 4212258f3cfd..68d420bfd3c0 100644
--- a/arch/alpha/math-emu/math.c
+++ b/arch/alpha/math-emu/math.c
@@ -4,6 +4,7 @@
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <asm/ptrace.h>
+#include <asm/fpu.h>
 
 #include <linux/uaccess.h>
 
@@ -45,12 +46,6 @@
 #define MISC_TRAPB	0x0000
 #define MISC_EXCB	0x0400
 
-extern unsigned long alpha_read_fp_reg (unsigned long reg);
-extern void alpha_write_fp_reg (unsigned long reg, unsigned long val);
-extern unsigned long alpha_read_fp_reg_s (unsigned long reg);
-extern void alpha_write_fp_reg_s (unsigned long reg, unsigned long val);
-
-
 #ifdef MODULE
 
 MODULE_DESCRIPTION("FP Software completion module");
diff --git a/arch/alpha/mm/Makefile b/arch/alpha/mm/Makefile
index bd770302eb82..101dbd06b4ce 100644
--- a/arch/alpha/mm/Makefile
+++ b/arch/alpha/mm/Makefile
@@ -3,6 +3,4 @@
 # Makefile for the linux alpha-specific parts of the memory manager.
 #
 
-ccflags-y := -Werror
-
 obj-y	:= init.o fault.o
diff --git a/arch/alpha/mm/fault.c b/arch/alpha/mm/fault.c
index eee5102c3d88..a9816bbc9f34 100644
--- a/arch/alpha/mm/fault.c
+++ b/arch/alpha/mm/fault.c
@@ -78,8 +78,8 @@ __load_new_mm_context(struct mm_struct *next_mm)
 
 /* Macro for exception fixup code to access integer registers.  */
 #define dpf_reg(r)							\
-	(((unsigned long *)regs)[(r) <= 8 ? (r) : (r) <= 15 ? (r)-16 :	\
-				 (r) <= 18 ? (r)+10 : (r)-10])
+	(((unsigned long *)regs)[(r) <= 8 ? (r) : (r) <= 15 ? (r)-17 :	\
+				 (r) <= 18 ? (r)+11 : (r)-10])
 
 asmlinkage void
 do_page_fault(unsigned long address, unsigned long mmcsr,
@@ -119,20 +119,12 @@ do_page_fault(unsigned long address, unsigned long mmcsr,
 		flags |= FAULT_FLAG_USER;
 	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
 retry:
-	mmap_read_lock(mm);
-	vma = find_vma(mm, address);
+	vma = lock_mm_and_find_vma(mm, address, regs);
 	if (!vma)
-		goto bad_area;
-	if (vma->vm_start <= address)
-		goto good_area;
-	if (!(vma->vm_flags & VM_GROWSDOWN))
-		goto bad_area;
-	if (expand_stack(vma, address))
-		goto bad_area;
+		goto bad_area_nosemaphore;
 
 	/* Ok, we have a good vm_area for this memory access, so
 	   we can handle it.  */
- good_area:
 	si_code = SEGV_ACCERR;
 	if (cause < 0) {
 		if (!(vma->vm_flags & VM_EXEC))
@@ -152,7 +144,14 @@ retry:
 	   the fault.  */
 	fault = handle_mm_fault(vma, address, flags, regs);
 
-	if (fault_signal_pending(fault, regs))
+	if (fault_signal_pending(fault, regs)) {
+		if (!user_mode(regs))
+			goto no_context;
+		return;
+	}
+
+	/* The fault is fully completed (including releasing mmap lock) */
+	if (fault & VM_FAULT_COMPLETED)
 		return;
 
 	if (unlikely(fault & VM_FAULT_ERROR)) {
@@ -165,17 +164,15 @@ retry:
 		BUG();
 	}
 
-	if (flags & FAULT_FLAG_ALLOW_RETRY) {
-		if (fault & VM_FAULT_RETRY) {
-			flags |= FAULT_FLAG_TRIED;
+	if (fault & VM_FAULT_RETRY) {
+		flags |= FAULT_FLAG_TRIED;
 
-			 /* No need to mmap_read_unlock(mm) as we would
-			 * have already released it in __lock_page_or_retry
-			 * in mm/filemap.c.
-			 */
+		/* No need to mmap_read_unlock(mm) as we would
+		 * have already released it in __lock_page_or_retry
+		 * in mm/filemap.c.
+		 */
 
-			goto retry;
-		}
+		goto retry;
 	}
 
 	mmap_read_unlock(mm);
@@ -187,6 +184,7 @@ retry:
  bad_area:
 	mmap_read_unlock(mm);
 
+ bad_area_nosemaphore:
 	if (user_mode(regs))
 		goto do_sigsegv;
 
@@ -204,7 +202,7 @@ retry:
 	printk(KERN_ALERT "Unable to handle kernel paging request at "
 	       "virtual address %016lx\n", address);
 	die_if_kernel("Oops", regs, cause, (unsigned long*)regs - 16);
-	do_exit(SIGKILL);
+	make_task_dead(SIGKILL);
 
 	/* We ran out of memory, or some other thing happened to us that
 	   made us unable to handle the page fault gracefully.  */
diff --git a/arch/alpha/mm/init.c b/arch/alpha/mm/init.c
index f6114d03357c..4c5ab9cd8a0a 100644
--- a/arch/alpha/mm/init.c
+++ b/arch/alpha/mm/init.c
@@ -33,7 +33,7 @@
 #include <asm/setup.h>
 #include <asm/sections.h>
 
-extern void die_if_kernel(char *,struct pt_regs *,long);
+#include "../kernel/proto.h"
 
 static struct pcb_struct original_pcb;
 
@@ -42,7 +42,7 @@ pgd_alloc(struct mm_struct *mm)
 {
 	pgd_t *ret, *init;
 
-	ret = (pgd_t *)__get_free_page(GFP_KERNEL | __GFP_ZERO);
+	ret = __pgd_alloc(mm, 0);
 	init = pgd_offset(&init_mm, 0UL);
 	if (ret) {
 #ifdef CONFIG_ALPHA_LARGE_VMALLOC
@@ -60,33 +60,6 @@ pgd_alloc(struct mm_struct *mm)
 }
 
 
-/*
- * BAD_PAGE is the page that is used for page faults when linux
- * is out-of-memory. Older versions of linux just did a
- * do_exit(), but using this instead means there is less risk
- * for a process dying in kernel mode, possibly leaving an inode
- * unused etc..
- *
- * BAD_PAGETABLE is the accompanying page-table: it is initialized
- * to point to BAD_PAGE entries.
- *
- * ZERO_PAGE is a special page that is used for zero-initialized
- * data and COW.
- */
-pmd_t *
-__bad_pagetable(void)
-{
-	memset((void *) EMPTY_PGT, 0, PAGE_SIZE);
-	return (pmd_t *) EMPTY_PGT;
-}
-
-pte_t
-__bad_page(void)
-{
-	memset((void *) EMPTY_PGE, 0, PAGE_SIZE);
-	return pte_mkdirty(mk_pte(virt_to_page(EMPTY_PGE), PAGE_SHARED));
-}
-
 static inline unsigned long
 load_PCB(struct pcb_struct *pcb)
 {
@@ -253,7 +226,7 @@ void __init paging_init(void)
 	free_area_init(max_zone_pfn);
 
 	/* Initialize the kernel's ZERO_PGE. */
-	memset((void *)ZERO_PGE, 0, PAGE_SIZE);
+	memset(absolute_pointer(ZERO_PGE), 0, PAGE_SIZE);
 }
 
 #if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_SRM)
@@ -273,10 +246,24 @@ srm_paging_stop (void)
 }
 #endif
 
-void __init
-mem_init(void)
-{
-	set_max_mapnr(max_low_pfn);
-	high_memory = (void *) __va(max_low_pfn * PAGE_SIZE);
-	memblock_free_all();
-}
+static const pgprot_t protection_map[16] = {
+	[VM_NONE]					= _PAGE_P(_PAGE_FOE | _PAGE_FOW |
+								  _PAGE_FOR),
+	[VM_READ]					= _PAGE_P(_PAGE_FOE | _PAGE_FOW),
+	[VM_WRITE]					= _PAGE_P(_PAGE_FOE),
+	[VM_WRITE | VM_READ]				= _PAGE_P(_PAGE_FOE),
+	[VM_EXEC]					= _PAGE_P(_PAGE_FOW | _PAGE_FOR),
+	[VM_EXEC | VM_READ]				= _PAGE_P(_PAGE_FOW),
+	[VM_EXEC | VM_WRITE]				= _PAGE_P(0),
+	[VM_EXEC | VM_WRITE | VM_READ]			= _PAGE_P(0),
+	[VM_SHARED]					= _PAGE_S(_PAGE_FOE | _PAGE_FOW |
+								  _PAGE_FOR),
+	[VM_SHARED | VM_READ]				= _PAGE_S(_PAGE_FOE | _PAGE_FOW),
+	[VM_SHARED | VM_WRITE]				= _PAGE_S(_PAGE_FOE),
+	[VM_SHARED | VM_WRITE | VM_READ]		= _PAGE_S(_PAGE_FOE),
+	[VM_SHARED | VM_EXEC]				= _PAGE_S(_PAGE_FOW | _PAGE_FOR),
+	[VM_SHARED | VM_EXEC | VM_READ]			= _PAGE_S(_PAGE_FOW),
+	[VM_SHARED | VM_EXEC | VM_WRITE]		= _PAGE_S(0),
+	[VM_SHARED | VM_EXEC | VM_WRITE | VM_READ]	= _PAGE_S(0)
+};
+DECLARE_VM_GET_PAGE_PROT
diff --git a/arch/arc/Kbuild b/arch/arc/Kbuild
index 699d8cae9b1f..20ea7dd482d4 100644
--- a/arch/arc/Kbuild
+++ b/arch/arc/Kbuild
@@ -1,3 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 obj-y += kernel/
 obj-y += mm/
+obj-y += net/
+
+# for cleaning
+subdir- += boot
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index 3a5a80f302e1..f27e6b90428e 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -6,6 +6,7 @@
 config ARC
 	def_bool y
 	select ARC_TIMERS
+	select ARCH_HAS_CPU_CACHE_ALIASING
 	select ARCH_HAS_CACHE_LINE_SIZE
 	select ARCH_HAS_DEBUG_VM_PGTABLE
 	select ARCH_HAS_DMA_PREP_COHERENT
@@ -13,43 +14,46 @@ config ARC
 	select ARCH_HAS_SETUP_DMA_OPS
 	select ARCH_HAS_SYNC_DMA_FOR_CPU
 	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
+	select ARCH_NEED_CMPXCHG_1_EMU
 	select ARCH_SUPPORTS_ATOMIC_RMW if ARC_HAS_LLSC
 	select ARCH_32BIT_OFF_T
 	select BUILDTIME_TABLE_SORT
+	select GENERIC_BUILTIN_DTB
 	select CLONE_BACKWARDS
 	select COMMON_CLK
 	select DMA_DIRECT_REMAP
 	select GENERIC_ATOMIC64 if !ISA_ARCV2 || !(ARC_HAS_LL64 && ARC_HAS_LLSC)
-	select GENERIC_FIND_FIRST_BIT
 	# for now, we don't need GENERIC_IRQ_PROBE, CONFIG_GENERIC_IRQ_CHIP
 	select GENERIC_IRQ_SHOW
 	select GENERIC_PCI_IOMAP
-	select GENERIC_PENDING_IRQ if SMP
 	select GENERIC_SCHED_CLOCK
 	select GENERIC_SMP_IDLE_THREAD
+	select GENERIC_IOREMAP
+	select GENERIC_STRNCPY_FROM_USER if MMU
+	select GENERIC_STRNLEN_USER if MMU
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_ARCH_TRANSPARENT_HUGEPAGE if ARC_MMU_V4
 	select HAVE_DEBUG_STACKOVERFLOW
 	select HAVE_DEBUG_KMEMLEAK
-	select HAVE_FUTEX_CMPXCHG if FUTEX
 	select HAVE_IOREMAP_PROT
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_LZMA
 	select HAVE_KPROBES
 	select HAVE_KRETPROBES
+	select HAVE_REGS_AND_STACK_ACCESS_API
 	select HAVE_MOD_ARCH_SPECIFIC
 	select HAVE_PERF_EVENTS
-	select HANDLE_DOMAIN_IRQ
+	select HAVE_SYSCALL_TRACEPOINTS
 	select IRQ_DOMAIN
+	select LOCK_MM_AND_FIND_VMA
 	select MODULES_USE_ELF_RELA
 	select OF
 	select OF_EARLY_FLATTREE
 	select PCI_SYSCALL if PCI
-	select PERF_USE_VMALLOC if ARC_CACHE_VIPT_ALIASING
 	select HAVE_ARCH_JUMP_LABEL if ISA_ARCV2 && !CPU_ENDIAN_BE32
-	select SET_FS
 	select TRACE_IRQFLAGS_SUPPORT
+	select HAVE_EBPF_JIT if ISA_ARCV2
 
 config LOCKDEP_SUPPORT
 	def_bool y
@@ -230,10 +234,6 @@ config ARC_CACHE_PAGES
 	  Note that Global I/D ENABLE + Per Page DISABLE works but corollary
 	  Global DISABLE + Per Page ENABLE won't work
 
-config ARC_CACHE_VIPT_ALIASING
-	bool "Support VIPT Aliasing D$"
-	depends on ARC_HAS_DCACHE && ISA_ARCOMPACT
-
 endif #ARC_CACHE
 
 config ARC_HAS_ICCM
@@ -287,15 +287,17 @@ choice
 
 config ARC_PAGE_SIZE_8K
 	bool "8KB"
+	select HAVE_PAGE_SIZE_8KB
 	help
 	  Choose between 8k vs 16k
 
 config ARC_PAGE_SIZE_16K
+	select HAVE_PAGE_SIZE_16KB
 	bool "16KB"
 
 config ARC_PAGE_SIZE_4K
 	bool "4KB"
-	depends on ARC_MMU_V3 || ARC_MMU_V4
+	select HAVE_PAGE_SIZE_4KB
 
 endchoice
 
@@ -472,7 +474,8 @@ config HIGHMEM
 
 config ARC_HAS_PAE40
 	bool "Support for the 40-bit Physical Address Extension"
-	depends on ISA_ARCV2
+	depends on ARC_MMU_V4
+	depends on !ARC_PAGE_SIZE_4K
 	select HIGHMEM
 	select PHYS_ADDR_T_64BIT
 	help
@@ -491,11 +494,11 @@ config ARC_KVADDR_SIZE
 	  kernel-user gutter)
 
 config ARC_CURR_IN_REG
-	bool "Dedicate Register r25 for current_task pointer"
+	bool "cache current task pointer in gp"
 	default y
 	help
-	  This reserved Register R25 to point to Current Task in
-	  kernel mode. This saves memory access for each such access
+	  This reserves gp register to point to Current Task in
+	  kernel mode eliding memory access for each access
 
 
 config ARC_EMUL_UNALIGNED
@@ -548,17 +551,17 @@ config ARC_DBG_JUMP_LABEL
 	  part of static keys (jump labels) related code.
 endif
 
-config ARC_BUILTIN_DTB_NAME
+config BUILTIN_DTB_NAME
 	string "Built in DTB"
+	default "nsim_700"
 	help
-	  Set the name of the DTB to embed in the vmlinux binary
-	  Leaving it blank selects the minimal "skeleton" dtb
+	  Set the name of the DTB to embed in the vmlinux binary.
 
 endmenu	 # "ARC Architecture Configuration"
 
-config FORCE_MAX_ZONEORDER
+config ARCH_FORCE_MAX_ORDER
 	int "Maximum zone order"
-	default "12" if ARC_HUGEPAGE_16M
-	default "11"
+	default "11" if ARC_HUGEPAGE_16M
+	default "10"
 
 source "kernel/power/Kconfig"
diff --git a/arch/arc/Makefile b/arch/arc/Makefile
index 8782a03f24a8..0c5e6e6314f2 100644
--- a/arch/arc/Makefile
+++ b/arch/arc/Makefile
@@ -6,7 +6,7 @@
 KBUILD_DEFCONFIG := haps_hs_smp_defconfig
 
 ifeq ($(CROSS_COMPILE),)
-CROSS_COMPILE := $(call cc-cross-prefix, arc-linux- arceb-linux-)
+CROSS_COMPILE := $(call cc-cross-prefix, arc-linux- arceb-linux- arc-linux-gnu-)
 endif
 
 cflags-y	+= -fno-common -pipe -fno-builtin -mmedium-calls -D__linux__
@@ -14,10 +14,10 @@ cflags-y	+= -fno-common -pipe -fno-builtin -mmedium-calls -D__linux__
 tune-mcpu-def-$(CONFIG_ISA_ARCOMPACT)	:= -mcpu=arc700
 tune-mcpu-def-$(CONFIG_ISA_ARCV2)	:= -mcpu=hs38
 
-ifeq ($(CONFIG_ARC_TUNE_MCPU),"")
+ifeq ($(CONFIG_ARC_TUNE_MCPU),)
 cflags-y				+= $(tune-mcpu-def-y)
 else
-tune-mcpu				:= $(shell echo $(CONFIG_ARC_TUNE_MCPU))
+tune-mcpu				:= $(CONFIG_ARC_TUNE_MCPU)
 ifneq ($(call cc-option,$(tune-mcpu)),)
 cflags-y				+= $(tune-mcpu)
 else
@@ -28,14 +28,14 @@ cflags-y				+= $(tune-mcpu-def-y)
 endif
 endif
 
-
 ifdef CONFIG_ARC_CURR_IN_REG
 # For a global register definition, make sure it gets passed to every file
 # We had a customer reported bug where some code built in kernel was NOT using
-# any kernel headers, and missing the r25 global register
+# any kernel headers, and missing the global register
 # Can't do unconditionally because of recursive include issues
 # due to <linux/thread_info.h>
 LINUXINCLUDE	+=  -include $(srctree)/arch/arc/include/asm/current.h
+cflags-y	+= -ffixed-gp
 endif
 
 cflags-y				+= -fsection-anchors
@@ -67,7 +67,7 @@ cflags-$(CONFIG_ARC_DW2_UNWIND)		+= -fasynchronous-unwind-tables $(cfi)
 # small data is default for elf32 tool-chain. If not usable, disable it
 # This also allows repurposing GP as scratch reg to gcc reg allocator
 disable_small_data := y
-cflags-$(disable_small_data)		+= -mno-sdata -fcall-used-gp
+cflags-$(disable_small_data)		+= -mno-sdata
 
 cflags-$(CONFIG_CPU_BIG_ENDIAN)		+= -mbig-endian
 ldflags-$(CONFIG_CPU_BIG_ENDIAN)	+= -EB
@@ -82,11 +82,6 @@ KBUILD_CFLAGS	+= $(cflags-y)
 KBUILD_AFLAGS	+= $(KBUILD_CFLAGS)
 KBUILD_LDFLAGS	+= $(ldflags-y)
 
-head-y		:= arch/arc/kernel/head.o
-
-# w/o this dtb won't embed into kernel binary
-core-y		+= arch/arc/boot/dts/
-
 core-y				+= arch/arc/plat-sim/
 core-$(CONFIG_ARC_PLAT_TB10X)	+= arch/arc/plat-tb10x/
 core-$(CONFIG_ARC_PLAT_AXS10X)	+= arch/arc/plat-axs10x/
@@ -112,6 +107,3 @@ uImage: $(uimage-default-y)
 	@$(kecho) '  Image $(boot)/uImage is ready'
 
 CLEAN_FILES += $(boot)/uImage
-
-archclean:
-	$(Q)$(MAKE) $(clean)=$(boot)
diff --git a/arch/arc/boot/Makefile b/arch/arc/boot/Makefile
index 5648748c285f..5a8550124b73 100644
--- a/arch/arc/boot/Makefile
+++ b/arch/arc/boot/Makefile
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 
-# uImage build relies on mkimage being availble on your host for ARC target
+# uImage build relies on mkimage being available on your host for ARC target
 # You will need to build u-boot for ARC, rename mkimage to arc-elf32-mkimage
-# and make sure it's reacable from your PATH
+# and make sure it's reachable from your PATH
 
 OBJCOPYFLAGS= -O binary -R .note -R .note.gnu.build-id -R .comment -S
 
diff --git a/arch/arc/boot/dts/Makefile b/arch/arc/boot/dts/Makefile
index 8483a86c743d..ee5664f0640d 100644
--- a/arch/arc/boot/dts/Makefile
+++ b/arch/arc/boot/dts/Makefile
@@ -1,17 +1,9 @@
 # SPDX-License-Identifier: GPL-2.0
-# Built-in dtb
-builtindtb-y		:= nsim_700
 
-ifneq ($(CONFIG_ARC_BUILTIN_DTB_NAME),"")
-	builtindtb-y	:= $(patsubst "%",%,$(CONFIG_ARC_BUILTIN_DTB_NAME))
-endif
-
-obj-y   += $(builtindtb-y).dtb.o
-dtb-y := $(builtindtb-y).dtb
+dtb-y	:= $(addsuffix .dtb, $(CONFIG_BUILTIN_DTB_NAME))
 
 # for CONFIG_OF_ALL_DTBS test
-dtstree	:= $(srctree)/$(src)
-dtb-	:= $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts))
+dtb-	:= $(patsubst $(src)/%.dts,%.dtb, $(wildcard $(src)/*.dts))
 
 # board-specific dtc flags
 DTC_FLAGS_hsdk += --pad 20
diff --git a/arch/arc/boot/dts/axc001.dtsi b/arch/arc/boot/dts/axc001.dtsi
index 2a151607b080..88bcc7ab6f5a 100644
--- a/arch/arc/boot/dts/axc001.dtsi
+++ b/arch/arc/boot/dts/axc001.dtsi
@@ -54,7 +54,7 @@
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				snps,nr-gpios = <30>;
+				ngpios = <30>;
 				reg = <0>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
diff --git a/arch/arc/boot/dts/axc003.dtsi b/arch/arc/boot/dts/axc003.dtsi
index cd1edcf4f95e..9a2dc39a5cff 100644
--- a/arch/arc/boot/dts/axc003.dtsi
+++ b/arch/arc/boot/dts/axc003.dtsi
@@ -62,7 +62,7 @@
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				snps,nr-gpios = <30>;
+				ngpios = <30>;
 				reg = <0>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
@@ -103,11 +103,11 @@
 			dma-coherent;
 		};
 
-		ehci@40000 {
+		usb@40000 {
 			dma-coherent;
 		};
 
-		ohci@60000 {
+		usb@60000 {
 			dma-coherent;
 		};
 
@@ -119,9 +119,9 @@
 	/*
 	 * The DW APB ICTL intc on MB is connected to CPU intc via a
 	 * DT "invisible" DW APB GPIO block, configured to simply pass thru
-	 * interrupts - setup accordinly in platform init (plat-axs10x/ax10x.c)
+	 * interrupts - setup accordingly in platform init (plat-axs10x/ax10x.c)
 	 *
-	 * So here we mimic a direct connection betwen them, ignoring the
+	 * So here we mimic a direct connection between them, ignoring the
 	 * ABPG GPIO. Thus set "interrupts = <24>" (DW APB GPIO to core)
 	 * instead of "interrupts = <12>" (DW APB ICTL to DW APB GPIO)
 	 *
diff --git a/arch/arc/boot/dts/axc003_idu.dtsi b/arch/arc/boot/dts/axc003_idu.dtsi
index 70779386ca79..f31382cb8be4 100644
--- a/arch/arc/boot/dts/axc003_idu.dtsi
+++ b/arch/arc/boot/dts/axc003_idu.dtsi
@@ -69,7 +69,7 @@
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				snps,nr-gpios = <30>;
+				ngpios = <30>;
 				reg = <0>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
@@ -110,11 +110,11 @@
 			dma-coherent;
 		};
 
-		ehci@40000 {
+		usb@40000 {
 			dma-coherent;
 		};
 
-		ohci@60000 {
+		usb@60000 {
 			dma-coherent;
 		};
 
diff --git a/arch/arc/boot/dts/axs10x_mb.dtsi b/arch/arc/boot/dts/axs10x_mb.dtsi
index 99d3e7175bf7..3add2fe257f8 100644
--- a/arch/arc/boot/dts/axs10x_mb.dtsi
+++ b/arch/arc/boot/dts/axs10x_mb.dtsi
@@ -87,13 +87,13 @@
 			mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */
 		};
 
-		ehci@40000 {
+		usb@40000 {
 			compatible = "generic-ehci";
 			reg = < 0x40000 0x100 >;
 			interrupts = < 8 >;
 		};
 
-		ohci@60000 {
+		usb@60000 {
 			compatible = "generic-ohci";
 			reg = < 0x60000 0x100 >;
 			interrupts = < 8 >;
@@ -250,7 +250,7 @@
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				snps,nr-gpios = <32>;
+				ngpios = <32>;
 				reg = <0>;
 			};
 
@@ -258,7 +258,7 @@
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				snps,nr-gpios = <8>;
+				ngpios = <8>;
 				reg = <1>;
 			};
 
@@ -266,7 +266,7 @@
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				snps,nr-gpios = <8>;
+				ngpios = <8>;
 				reg = <2>;
 			};
 		};
@@ -281,7 +281,7 @@
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				snps,nr-gpios = <30>;
+				ngpios = <30>;
 				reg = <0>;
 			};
 
@@ -289,7 +289,7 @@
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				snps,nr-gpios = <10>;
+				ngpios = <10>;
 				reg = <1>;
 			};
 
@@ -297,7 +297,7 @@
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				snps,nr-gpios = <8>;
+				ngpios = <8>;
 				reg = <2>;
 			};
 		};
diff --git a/arch/arc/boot/dts/hsdk.dts b/arch/arc/boot/dts/hsdk.dts
index dcaa44e408ac..98bb850722a4 100644
--- a/arch/arc/boot/dts/hsdk.dts
+++ b/arch/arc/boot/dts/hsdk.dts
@@ -205,7 +205,6 @@
 		};
 
 		gmac: ethernet@8000 {
-			#interrupt-cells = <1>;
 			compatible = "snps,dwmac";
 			reg = <0x8000 0x2000>;
 			interrupts = <10>;
@@ -234,7 +233,7 @@
 			};
 		};
 
-		ohci@60000 {
+		usb@60000 {
 			compatible = "snps,hsdk-v1.0-ohci", "generic-ohci";
 			reg = <0x60000 0x100>;
 			interrupts = <15>;
@@ -242,7 +241,7 @@
 			dma-coherent;
 		};
 
-		ehci@40000 {
+		usb@40000 {
 			compatible = "snps,hsdk-v1.0-ehci", "generic-ehci";
 			reg = <0x40000 0x100>;
 			interrupts = <15>;
@@ -275,7 +274,7 @@
 			cs-gpios = <&creg_gpio 0 GPIO_ACTIVE_LOW>,
 				   <&creg_gpio 1 GPIO_ACTIVE_LOW>;
 
-			spi-flash@0 {
+			flash@0 {
 				compatible = "sst26wf016b", "jedec,spi-nor";
 				reg = <0>;
 				#address-cells = <1>;
@@ -309,7 +308,7 @@
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				snps,nr-gpios = <24>;
+				ngpios = <24>;
 				reg = <0>;
 			};
 		};
diff --git a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
index cbb179770293..0e0e2d337bf8 100644
--- a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
+++ b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
@@ -46,7 +46,7 @@
 			clock-names = "stmmaceth";
 		};
 
-		ehci@40000 {
+		usb@40000 {
 			compatible = "generic-ehci";
 			reg = < 0x40000 0x100 >;
 			interrupts = < 8 >;
@@ -113,7 +113,7 @@
 	/*
 	 * Embedded Vision subsystem UIO mappings; only relevant for EV VDK
 	 *
-	 * This node is intentionally put outside of MB above becase
+	 * This node is intentionally put outside of MB above because
 	 * it maps areas outside of MB's 0xez-0xfz.
 	 */
 	uio_ev: uio@d0000000 {
diff --git a/arch/arc/configs/axs101_defconfig b/arch/arc/configs/axs101_defconfig
index 0016149f9583..f930396d9dae 100644
--- a/arch/arc/configs/axs101_defconfig
+++ b/arch/arc/configs/axs101_defconfig
@@ -9,8 +9,7 @@ CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_SLUB_DEBUG is not set
@@ -24,7 +23,7 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_ARC_PLAT_AXS10X=y
 CONFIG_AXS101=y
 CONFIG_ARC_CACHE_LINE_SHIFT=5
-CONFIG_ARC_BUILTIN_DTB_NAME="axs101"
+CONFIG_BUILTIN_DTB_NAME="axs101"
 CONFIG_PREEMPT=y
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y
@@ -36,9 +35,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_IPV6 is not set
 CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
@@ -70,6 +66,7 @@ CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_DESIGNWARE_CORE=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 # CONFIG_HWMON is not set
 CONFIG_DRM=m
@@ -91,7 +88,7 @@ CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_DW=y
 # CONFIG_IOMMU_SUPPORT is not set
-CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_NTFS_FS=y
@@ -100,7 +97,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
diff --git a/arch/arc/configs/axs103_defconfig b/arch/arc/configs/axs103_defconfig
index 5b031582a1cf..6b779dee5ea0 100644
--- a/arch/arc/configs/axs103_defconfig
+++ b/arch/arc/configs/axs103_defconfig
@@ -9,8 +9,7 @@ CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_SLUB_DEBUG is not set
@@ -23,7 +22,7 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_ARC_PLAT_AXS10X=y
 CONFIG_AXS103=y
 CONFIG_ISA_ARCV2=y
-CONFIG_ARC_BUILTIN_DTB_NAME="axs103"
+CONFIG_BUILTIN_DTB_NAME="axs103"
 CONFIG_PREEMPT=y
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y
@@ -35,9 +34,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_IPV6 is not set
 CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
@@ -70,6 +66,7 @@ CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_DESIGNWARE_CORE=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y
@@ -89,7 +86,7 @@ CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_DW=y
 # CONFIG_IOMMU_SUPPORT is not set
-CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_NTFS_FS=y
@@ -98,7 +95,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
diff --git a/arch/arc/configs/axs103_smp_defconfig b/arch/arc/configs/axs103_smp_defconfig
index d4eec39e0112..a89b50d5369d 100644
--- a/arch/arc/configs/axs103_smp_defconfig
+++ b/arch/arc/configs/axs103_smp_defconfig
@@ -9,12 +9,10 @@ CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
 CONFIG_MODULE_UNLOAD=y
@@ -24,7 +22,7 @@ CONFIG_ARC_PLAT_AXS10X=y
 CONFIG_AXS103=y
 CONFIG_ISA_ARCV2=y
 CONFIG_SMP=y
-CONFIG_ARC_BUILTIN_DTB_NAME="axs103_idu"
+CONFIG_BUILTIN_DTB_NAME="axs103_idu"
 CONFIG_PREEMPT=y
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y
@@ -36,9 +34,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_IPV6 is not set
 CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
@@ -71,6 +66,7 @@ CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_DESIGNWARE_CORE=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 # CONFIG_HWMON is not set
 CONFIG_DRM=m
@@ -92,7 +88,7 @@ CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_DW=y
 # CONFIG_IOMMU_SUPPORT is not set
-CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_NTFS_FS=y
@@ -101,7 +97,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
diff --git a/arch/arc/configs/haps_hs_defconfig b/arch/arc/configs/haps_hs_defconfig
index 7337cdf4ffdd..3a1577112078 100644
--- a/arch/arc/configs/haps_hs_defconfig
+++ b/arch/arc/configs/haps_hs_defconfig
@@ -11,12 +11,10 @@ CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
 CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_ARC_BUILTIN_DTB_NAME="haps_hs"
+CONFIG_BUILTIN_DTB_NAME="haps_hs"
 CONFIG_MODULES=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_COMPACTION is not set
@@ -60,6 +58,5 @@ CONFIG_EXT2_FS_XATTR=y
 CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_PREEMPT is not set
diff --git a/arch/arc/configs/haps_hs_smp_defconfig b/arch/arc/configs/haps_hs_smp_defconfig
index bc927221afc0..a3cf940b1f5b 100644
--- a/arch/arc/configs/haps_hs_smp_defconfig
+++ b/arch/arc/configs/haps_hs_smp_defconfig
@@ -11,14 +11,12 @@ CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
 CONFIG_SMP=y
-CONFIG_ARC_BUILTIN_DTB_NAME="haps_hs_idu"
+CONFIG_BUILTIN_DTB_NAME="haps_hs_idu"
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 # CONFIG_BLK_DEV_BSG is not set
@@ -60,6 +58,5 @@ CONFIG_EXT2_FS_XATTR=y
 CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_SOFTLOCKUP_DETECTOR=y
 # CONFIG_DEBUG_PREEMPT is not set
diff --git a/arch/arc/configs/hsdk_defconfig b/arch/arc/configs/hsdk_defconfig
index aa000075a575..1b8b2a098cda 100644
--- a/arch/arc/configs/hsdk_defconfig
+++ b/arch/arc/configs/hsdk_defconfig
@@ -9,12 +9,10 @@ CONFIG_NAMESPACES=y
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_BLK_DEV_RAM=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_ARC_SOC_HSDK=y
@@ -22,7 +20,7 @@ CONFIG_ISA_ARCV2=y
 CONFIG_SMP=y
 CONFIG_LINUX_LINK_BASE=0x90000000
 CONFIG_LINUX_RAM_BASE=0x80000000
-CONFIG_ARC_BUILTIN_DTB_NAME="hsdk"
+CONFIG_BUILTIN_DTB_NAME="hsdk"
 CONFIG_PREEMPT=y
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y
@@ -79,14 +77,13 @@ CONFIG_DMADEVICES=y
 CONFIG_DW_AXI_DMAC=y
 CONFIG_IIO=y
 CONFIG_TI_ADC108S102=y
-CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
diff --git a/arch/arc/configs/nsim_700_defconfig b/arch/arc/configs/nsim_700_defconfig
index 326f6cde7826..f8b3235d9a65 100644
--- a/arch/arc/configs/nsim_700_defconfig
+++ b/arch/arc/configs/nsim_700_defconfig
@@ -11,14 +11,13 @@ CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_ISA_ARCOMPACT=y
-CONFIG_ARC_BUILTIN_DTB_NAME="nsim_700"
+CONFIG_BUILTIN_DTB_NAME="nsim_700"
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 # CONFIG_BLK_DEV_BSG is not set
@@ -57,5 +56,4 @@ CONFIG_EXT2_FS_XATTR=y
 CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 # CONFIG_DEBUG_PREEMPT is not set
diff --git a/arch/arc/configs/nsimosci_defconfig b/arch/arc/configs/nsimosci_defconfig
index bf39a0091679..ee45dc0877fb 100644
--- a/arch/arc/configs/nsimosci_defconfig
+++ b/arch/arc/configs/nsimosci_defconfig
@@ -10,9 +10,8 @@ CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
@@ -20,7 +19,7 @@ CONFIG_ISA_ARCOMPACT=y
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 # CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARC_BUILTIN_DTB_NAME="nsimosci"
+CONFIG_BUILTIN_DTB_NAME="nsimosci"
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -66,4 +65,3 @@ CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
-# CONFIG_ENABLE_MUST_CHECK is not set
diff --git a/arch/arc/configs/nsimosci_hs_defconfig b/arch/arc/configs/nsimosci_hs_defconfig
index 7121bd71c543..e0a309970c20 100644
--- a/arch/arc/configs/nsimosci_hs_defconfig
+++ b/arch/arc/configs/nsimosci_hs_defconfig
@@ -10,9 +10,8 @@ CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
@@ -20,7 +19,7 @@ CONFIG_KPROBES=y
 CONFIG_MODULES=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ISA_ARCV2=y
-CONFIG_ARC_BUILTIN_DTB_NAME="nsimosci_hs"
+CONFIG_BUILTIN_DTB_NAME="nsimosci_hs"
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -64,4 +63,3 @@ CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
-# CONFIG_ENABLE_MUST_CHECK is not set
diff --git a/arch/arc/configs/nsimosci_hs_smp_defconfig b/arch/arc/configs/nsimosci_hs_smp_defconfig
index f9863b294a70..88325b8b49cf 100644
--- a/arch/arc/configs/nsimosci_hs_smp_defconfig
+++ b/arch/arc/configs/nsimosci_hs_smp_defconfig
@@ -8,7 +8,6 @@ CONFIG_IKCONFIG_PROC=y
 # CONFIG_UTS_NS is not set
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_KPROBES=y
@@ -17,7 +16,7 @@ CONFIG_MODULES=y
 CONFIG_ISA_ARCV2=y
 CONFIG_SMP=y
 # CONFIG_ARC_TIMERS_64BIT is not set
-CONFIG_ARC_BUILTIN_DTB_NAME="nsimosci_hs_idu"
+CONFIG_BUILTIN_DTB_NAME="nsimosci_hs_idu"
 CONFIG_PREEMPT=y
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y
@@ -27,9 +26,6 @@ CONFIG_UNIX=y
 CONFIG_UNIX_DIAG=y
 CONFIG_NET_KEY=y
 CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
 CONFIG_DEVTMPFS=y
@@ -38,7 +34,6 @@ CONFIG_DEVTMPFS=y
 # CONFIG_BLK_DEV is not set
 CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
 CONFIG_EZCHIP_NPS_MANAGEMENT_ENET=y
 # CONFIG_NET_VENDOR_INTEL is not set
@@ -75,5 +70,5 @@ CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FTRACE=y
+# CONFIG_NET_VENDOR_CADENCE is not set
diff --git a/arch/arc/configs/tb10x_defconfig b/arch/arc/configs/tb10x_defconfig
index a12656ec0072..865fbc19ef03 100644
--- a/arch/arc/configs/tb10x_defconfig
+++ b/arch/arc/configs/tb10x_defconfig
@@ -14,13 +14,11 @@ CONFIG_INITRAMFS_SOURCE="../tb10x-rootfs.cpio"
 CONFIG_INITRAMFS_ROOT_UID=2100
 CONFIG_INITRAMFS_ROOT_GID=501
 # CONFIG_RD_GZIP is not set
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_AIO is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_ISA_ARCOMPACT=y
-CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
 CONFIG_MODULE_UNLOAD=y
@@ -28,7 +26,7 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_ARC_PLAT_TB10X=y
 CONFIG_ARC_CACHE_LINE_SHIFT=5
 CONFIG_HZ=250
-CONFIG_ARC_BUILTIN_DTB_NAME="abilis_tb100_dvk"
+CONFIG_BUILTIN_DTB_NAME="abilis_tb100_dvk"
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y
@@ -36,15 +34,11 @@ CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
 CONFIG_DEVTMPFS=y
 CONFIG_NETDEVICES=y
-# CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
 # CONFIG_NET_VENDOR_INTEL is not set
 # CONFIG_NET_VENDOR_MARVELL is not set
@@ -66,6 +60,7 @@ CONFIG_SERIAL_8250_DW=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 # CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_DESIGNWARE_CORE=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
@@ -91,16 +86,15 @@ CONFIG_TMPFS=y
 CONFIG_CONFIGFS_FS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_FS=y
 CONFIG_HEADERS_INSTALL=y
-CONFIG_HEADERS_CHECK=y
 CONFIG_DEBUG_SECTION_MISMATCH=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_MEMORY_INIT=y
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_SCHEDSTATS=y
-CONFIG_TIMER_STATS=y
 # CONFIG_CRYPTO_HW is not set
+# CONFIG_NET_VENDOR_CADENCE is not set
diff --git a/arch/arc/configs/vdk_hs38_defconfig b/arch/arc/configs/vdk_hs38_defconfig
index d7c858df520c..b7120523e09a 100644
--- a/arch/arc/configs/vdk_hs38_defconfig
+++ b/arch/arc/configs/vdk_hs38_defconfig
@@ -4,8 +4,7 @@ CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_SLUB_DEBUG is not set
@@ -14,7 +13,7 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_ARC_PLAT_AXS10X=y
 CONFIG_AXS103=y
 CONFIG_ISA_ARCV2=y
-CONFIG_ARC_BUILTIN_DTB_NAME="vdk_hs38"
+CONFIG_BUILTIN_DTB_NAME="vdk_hs38"
 CONFIG_PREEMPT=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -59,8 +58,6 @@ CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
 CONFIG_FB=y
-CONFIG_ARCPGU_RGB888=y
-CONFIG_ARCPGU_DISPTYPE=0
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
@@ -77,7 +74,7 @@ CONFIG_USB_OHCI_HCD_PLATFORM=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_SERIAL=y
 # CONFIG_IOMMU_SUPPORT is not set
-CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
 CONFIG_EXT4_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
@@ -88,7 +85,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_SOFTLOCKUP_DETECTOR=y
diff --git a/arch/arc/configs/vdk_hs38_smp_defconfig b/arch/arc/configs/vdk_hs38_smp_defconfig
index 015c1d43889e..4077abd5980c 100644
--- a/arch/arc/configs/vdk_hs38_smp_defconfig
+++ b/arch/arc/configs/vdk_hs38_smp_defconfig
@@ -4,8 +4,7 @@ CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_SLUB_DEBUG is not set
@@ -16,7 +15,7 @@ CONFIG_AXS103=y
 CONFIG_ISA_ARCV2=y
 CONFIG_SMP=y
 # CONFIG_ARC_TIMERS_64BIT is not set
-CONFIG_ARC_BUILTIN_DTB_NAME="vdk_hs38_smp"
+CONFIG_BUILTIN_DTB_NAME="vdk_hs38_smp"
 CONFIG_PREEMPT=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -82,7 +81,7 @@ CONFIG_MMC_DW=y
 CONFIG_UIO=y
 CONFIG_UIO_PDRV_GENIRQ=y
 # CONFIG_IOMMU_SUPPORT is not set
-CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_NTFS_FS=y
@@ -92,7 +91,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_SOFTLOCKUP_DETECTOR=y
diff --git a/arch/arc/include/asm/Kbuild b/arch/arc/include/asm/Kbuild
index 3c1afa524b9c..4c69522e0328 100644
--- a/arch/arc/include/asm/Kbuild
+++ b/arch/arc/include/asm/Kbuild
@@ -1,6 +1,9 @@
 # SPDX-License-Identifier: GPL-2.0
+syscall-y += syscall_table_32.h
+
 generic-y += extable.h
 generic-y += kvm_para.h
 generic-y += mcs_spinlock.h
 generic-y += parport.h
 generic-y += user.h
+generic-y += text-patching.h
diff --git a/arch/arc/include/asm/arcregs.h b/arch/arc/include/asm/arcregs.h
index 2162023195c5..d84908a177bd 100644
--- a/arch/arc/include/asm/arcregs.h
+++ b/arch/arc/include/asm/arcregs.h
@@ -23,7 +23,7 @@
 #define ARC_REG_ICCM_BUILD	0x78	/* ICCM size (common) */
 #define ARC_REG_XY_MEM_BCR	0x79
 #define ARC_REG_MAC_BCR		0x7a
-#define ARC_REG_MUL_BCR		0x7b
+#define ARC_REG_MPY_BCR		0x7b
 #define ARC_REG_SWAP_BCR	0x7c
 #define ARC_REG_NORM_BCR	0x7d
 #define ARC_REG_MIXMAX_BCR	0x7e
@@ -144,16 +144,13 @@
 #define ARC_AUX_AGU_MOD2	0x5E2
 #define ARC_AUX_AGU_MOD3	0x5E3
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
-#include <soc/arc/aux.h>
+#include <soc/arc/arc_aux.h>
 
 /* Helpers */
 #define TO_KB(bytes)		((bytes) >> 10)
 #define TO_MB(bytes)		(TO_KB(bytes) >> 10)
-#define PAGES_TO_KB(n_pages)	((n_pages) << (PAGE_SHIFT - 10))
-#define PAGES_TO_MB(n_pages)	(PAGES_TO_KB(n_pages) >> 10)
-
 
 /*
  ***************************************************************
@@ -177,7 +174,7 @@ struct bcr_isa_arcv2 {
 #endif
 };
 
-struct bcr_uarch_build_arcv2 {
+struct bcr_uarch_build {
 #ifdef CONFIG_CPU_BIG_ENDIAN
 	unsigned int pad:8, prod:8, maj:8, min:8;
 #else
@@ -185,6 +182,59 @@ struct bcr_uarch_build_arcv2 {
 #endif
 };
 
+struct bcr_mmu_3 {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int ver:8, ways:4, sets:4, res:3, sasid:1, pg_sz:4,
+		     u_itlb:4, u_dtlb:4;
+#else
+	unsigned int u_dtlb:4, u_itlb:4, pg_sz:4, sasid:1, res:3, sets:4,
+		     ways:4, ver:8;
+#endif
+};
+
+struct bcr_mmu_4 {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int ver:8, sasid:1, sz1:4, sz0:4, res:2, pae:1,
+		     n_ways:2, n_entry:2, n_super:2, u_itlb:3, u_dtlb:3;
+#else
+	/*           DTLB      ITLB      JES        JE         JA      */
+	unsigned int u_dtlb:3, u_itlb:3, n_super:2, n_entry:2, n_ways:2,
+		     pae:1, res:2, sz0:4, sz1:4, sasid:1, ver:8;
+#endif
+};
+
+struct bcr_cache {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int pad:12, line_len:4, sz:4, config:4, ver:8;
+#else
+	unsigned int ver:8, config:4, sz:4, line_len:4, pad:12;
+#endif
+};
+
+struct bcr_slc_cfg {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int pad:24, way:2, lsz:2, sz:4;
+#else
+	unsigned int sz:4, lsz:2, way:2, pad:24;
+#endif
+};
+
+struct bcr_clust_cfg {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int pad:7, c:1, num_entries:8, num_cores:8, ver:8;
+#else
+	unsigned int ver:8, num_cores:8, num_entries:8, c:1, pad:7;
+#endif
+};
+
+struct bcr_volatile {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int start:4, limit:4, pad:22, order:1, disable:1;
+#else
+	unsigned int disable:1, order:1, pad:22, limit:4, start:4;
+#endif
+};
+
 struct bcr_mpy {
 #ifdef CONFIG_CPU_BIG_ENDIAN
 	unsigned int pad:8, x1616:8, dsp:4, cycles:2, type:2, ver:8;
@@ -302,48 +352,6 @@ struct bcr_generic {
 #endif
 };
 
-/*
- *******************************************************************
- * Generic structures to hold build configuration used at runtime
- */
-
-struct cpuinfo_arc_mmu {
-	unsigned int ver:4, pg_sz_k:8, s_pg_sz_m:8, pad:10, sasid:1, pae:1;
-	unsigned int sets:12, ways:4, u_dtlb:8, u_itlb:8;
-};
-
-struct cpuinfo_arc_cache {
-	unsigned int sz_k:14, line_len:8, assoc:4, alias:1, vipt:1, pad:4;
-};
-
-struct cpuinfo_arc_bpu {
-	unsigned int ver, full, num_cache, num_pred, ret_stk;
-};
-
-struct cpuinfo_arc_ccm {
-	unsigned int base_addr, sz;
-};
-
-struct cpuinfo_arc {
-	struct cpuinfo_arc_cache icache, dcache, slc;
-	struct cpuinfo_arc_mmu mmu;
-	struct cpuinfo_arc_bpu bpu;
-	struct bcr_identity core;
-	struct bcr_isa_arcv2 isa;
-	const char *release, *name;
-	unsigned int vec_base;
-	struct cpuinfo_arc_ccm iccm, dccm;
-	struct {
-		unsigned int swap:1, norm:1, minmax:1, barrel:1, crc:1, swape:1, pad1:2,
-			     fpu_sp:1, fpu_dp:1, dual:1, dual_enb:1, pad2:4,
-			     ap_num:4, ap_full:1, smart:1, rtt:1, pad3:1,
-			     timer0:1, timer1:1, rtc:1, gfrc:1, pad4:4;
-	} extn;
-	struct bcr_mpy extn_mpy;
-};
-
-extern struct cpuinfo_arc cpuinfo_arc700[];
-
 static inline int is_isa_arcv2(void)
 {
 	return IS_ENABLED(CONFIG_ISA_ARCV2);
diff --git a/arch/arc/include/asm/atomic-llsc.h b/arch/arc/include/asm/atomic-llsc.h
index 088d348781c1..5258cb81a16b 100644
--- a/arch/arc/include/asm/atomic-llsc.h
+++ b/arch/arc/include/asm/atomic-llsc.h
@@ -5,7 +5,7 @@
 
 #define arch_atomic_set(v, i) WRITE_ONCE(((v)->counter), (i))
 
-#define ATOMIC_OP(op, c_op, asm_op)					\
+#define ATOMIC_OP(op, asm_op)					\
 static inline void arch_atomic_##op(int i, atomic_t *v)			\
 {									\
 	unsigned int val;						\
@@ -18,10 +18,10 @@ static inline void arch_atomic_##op(int i, atomic_t *v)			\
 	: [val]	"=&r"	(val) /* Early clobber to prevent reg reuse */	\
 	: [ctr]	"r"	(&v->counter), /* Not "m": llock only supports reg direct addr mode */	\
 	  [i]	"ir"	(i)						\
-	: "cc");							\
+	: "cc", "memory");						\
 }									\
 
-#define ATOMIC_OP_RETURN(op, c_op, asm_op)				\
+#define ATOMIC_OP_RETURN(op, asm_op)				\
 static inline int arch_atomic_##op##_return_relaxed(int i, atomic_t *v)	\
 {									\
 	unsigned int val;						\
@@ -34,7 +34,7 @@ static inline int arch_atomic_##op##_return_relaxed(int i, atomic_t *v)	\
 	: [val]	"=&r"	(val)						\
 	: [ctr]	"r"	(&v->counter),					\
 	  [i]	"ir"	(i)						\
-	: "cc");							\
+	: "cc", "memory");						\
 									\
 	return val;							\
 }
@@ -42,7 +42,7 @@ static inline int arch_atomic_##op##_return_relaxed(int i, atomic_t *v)	\
 #define arch_atomic_add_return_relaxed		arch_atomic_add_return_relaxed
 #define arch_atomic_sub_return_relaxed		arch_atomic_sub_return_relaxed
 
-#define ATOMIC_FETCH_OP(op, c_op, asm_op)				\
+#define ATOMIC_FETCH_OP(op, asm_op)				\
 static inline int arch_atomic_fetch_##op##_relaxed(int i, atomic_t *v)	\
 {									\
 	unsigned int val, orig;						\
@@ -56,7 +56,7 @@ static inline int arch_atomic_fetch_##op##_relaxed(int i, atomic_t *v)	\
 	  [orig] "=&r" (orig)						\
 	: [ctr]	"r"	(&v->counter),					\
 	  [i]	"ir"	(i)						\
-	: "cc");							\
+	: "cc", "memory");						\
 									\
 	return orig;							\
 }
@@ -69,23 +69,23 @@ static inline int arch_atomic_fetch_##op##_relaxed(int i, atomic_t *v)	\
 #define arch_atomic_fetch_or_relaxed		arch_atomic_fetch_or_relaxed
 #define arch_atomic_fetch_xor_relaxed		arch_atomic_fetch_xor_relaxed
 
-#define ATOMIC_OPS(op, c_op, asm_op)					\
-	ATOMIC_OP(op, c_op, asm_op)					\
-	ATOMIC_OP_RETURN(op, c_op, asm_op)				\
-	ATOMIC_FETCH_OP(op, c_op, asm_op)
+#define ATOMIC_OPS(op, asm_op)					\
+	ATOMIC_OP(op, asm_op)					\
+	ATOMIC_OP_RETURN(op, asm_op)				\
+	ATOMIC_FETCH_OP(op, asm_op)
 
-ATOMIC_OPS(add, +=, add)
-ATOMIC_OPS(sub, -=, sub)
+ATOMIC_OPS(add, add)
+ATOMIC_OPS(sub, sub)
 
 #undef ATOMIC_OPS
-#define ATOMIC_OPS(op, c_op, asm_op)					\
-	ATOMIC_OP(op, c_op, asm_op)					\
-	ATOMIC_FETCH_OP(op, c_op, asm_op)
+#define ATOMIC_OPS(op, asm_op)					\
+	ATOMIC_OP(op, asm_op)					\
+	ATOMIC_FETCH_OP(op, asm_op)
 
-ATOMIC_OPS(and, &=, and)
-ATOMIC_OPS(andnot, &= ~, bic)
-ATOMIC_OPS(or, |=, or)
-ATOMIC_OPS(xor, ^=, xor)
+ATOMIC_OPS(and, and)
+ATOMIC_OPS(andnot, bic)
+ATOMIC_OPS(or, or)
+ATOMIC_OPS(xor, xor)
 
 #define arch_atomic_andnot		arch_atomic_andnot
 
diff --git a/arch/arc/include/asm/atomic-spinlock.h b/arch/arc/include/asm/atomic-spinlock.h
index 2c830347bfb4..89d12a60f84c 100644
--- a/arch/arc/include/asm/atomic-spinlock.h
+++ b/arch/arc/include/asm/atomic-spinlock.h
@@ -81,6 +81,11 @@ static inline int arch_atomic_fetch_##op(int i, atomic_t *v)		\
 ATOMIC_OPS(add, +=, add)
 ATOMIC_OPS(sub, -=, sub)
 
+#define arch_atomic_fetch_add		arch_atomic_fetch_add
+#define arch_atomic_fetch_sub		arch_atomic_fetch_sub
+#define arch_atomic_add_return		arch_atomic_add_return
+#define arch_atomic_sub_return		arch_atomic_sub_return
+
 #undef ATOMIC_OPS
 #define ATOMIC_OPS(op, c_op, asm_op)					\
 	ATOMIC_OP(op, c_op, asm_op)					\
@@ -92,7 +97,11 @@ ATOMIC_OPS(or, |=, or)
 ATOMIC_OPS(xor, ^=, xor)
 
 #define arch_atomic_andnot		arch_atomic_andnot
+
+#define arch_atomic_fetch_and		arch_atomic_fetch_and
 #define arch_atomic_fetch_andnot	arch_atomic_fetch_andnot
+#define arch_atomic_fetch_or		arch_atomic_fetch_or
+#define arch_atomic_fetch_xor		arch_atomic_fetch_xor
 
 #undef ATOMIC_OPS
 #undef ATOMIC_FETCH_OP
diff --git a/arch/arc/include/asm/atomic.h b/arch/arc/include/asm/atomic.h
index 52ee51e1ff7c..e615c42b93ba 100644
--- a/arch/arc/include/asm/atomic.h
+++ b/arch/arc/include/asm/atomic.h
@@ -6,7 +6,7 @@
 #ifndef _ASM_ARC_ATOMIC_H
 #define _ASM_ARC_ATOMIC_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/types.h>
 #include <linux/compiler.h>
@@ -22,30 +22,6 @@
 #include <asm/atomic-spinlock.h>
 #endif
 
-#define arch_atomic_cmpxchg(v, o, n)					\
-({									\
-	arch_cmpxchg(&((v)->counter), (o), (n));			\
-})
-
-#ifdef arch_cmpxchg_relaxed
-#define arch_atomic_cmpxchg_relaxed(v, o, n)				\
-({									\
-	arch_cmpxchg_relaxed(&((v)->counter), (o), (n));		\
-})
-#endif
-
-#define arch_atomic_xchg(v, n)						\
-({									\
-	arch_xchg(&((v)->counter), (n));				\
-})
-
-#ifdef arch_xchg_relaxed
-#define arch_atomic_xchg_relaxed(v, n)					\
-({									\
-	arch_xchg_relaxed(&((v)->counter), (n));			\
-})
-#endif
-
 /*
  * 64-bit atomics
  */
@@ -55,6 +31,6 @@
 #include <asm/atomic64-arcv2.h>
 #endif
 
-#endif	/* !__ASSEMBLY__ */
+#endif	/* !__ASSEMBLER__ */
 
 #endif
diff --git a/arch/arc/include/asm/atomic64-arcv2.h b/arch/arc/include/asm/atomic64-arcv2.h
index c5a8010fdc97..73080a664369 100644
--- a/arch/arc/include/asm/atomic64-arcv2.h
+++ b/arch/arc/include/asm/atomic64-arcv2.h
@@ -60,7 +60,7 @@ static inline void arch_atomic64_##op(s64 a, atomic64_t *v)		\
 	"	bnz     1b		\n"				\
 	: "=&r"(val)							\
 	: "r"(&v->counter), "ir"(a)					\
-	: "cc");							\
+	: "cc", "memory");						\
 }									\
 
 #define ATOMIC64_OP_RETURN(op, op1, op2)		        	\
@@ -77,7 +77,7 @@ static inline s64 arch_atomic64_##op##_return_relaxed(s64 a, atomic64_t *v)	\
 	"	bnz     1b		\n"				\
 	: [val] "=&r"(val)						\
 	: "r"(&v->counter), "ir"(a)					\
-	: "cc");	/* memory clobber comes from smp_mb() */	\
+	: "cc", "memory");						\
 									\
 	return val;							\
 }
@@ -99,7 +99,7 @@ static inline s64 arch_atomic64_fetch_##op##_relaxed(s64 a, atomic64_t *v)	\
 	"	bnz     1b		\n"				\
 	: "=&r"(orig), "=&r"(val)					\
 	: "r"(&v->counter), "ir"(a)					\
-	: "cc");	/* memory clobber comes from smp_mb() */	\
+	: "cc", "memory");						\
 									\
 	return orig;							\
 }
@@ -137,12 +137,9 @@ ATOMIC64_OPS(xor, xor, xor)
 #undef ATOMIC64_OP_RETURN
 #undef ATOMIC64_OP
 
-static inline s64
-arch_atomic64_cmpxchg(atomic64_t *ptr, s64 expected, s64 new)
+static inline u64 __arch_cmpxchg64_relaxed(volatile void *ptr, u64 old, u64 new)
 {
-	s64 prev;
-
-	smp_mb();
+	u64 prev;
 
 	__asm__ __volatile__(
 	"1:	llockd  %0, [%1]	\n"
@@ -152,13 +149,12 @@ arch_atomic64_cmpxchg(atomic64_t *ptr, s64 expected, s64 new)
 	"	bnz     1b		\n"
 	"2:				\n"
 	: "=&r"(prev)
-	: "r"(ptr), "ir"(expected), "r"(new)
-	: "cc");	/* memory clobber comes from smp_mb() */
-
-	smp_mb();
+	: "r"(ptr), "ir"(old), "r"(new)
+	: "memory", "cc");
 
 	return prev;
 }
+#define arch_cmpxchg64_relaxed __arch_cmpxchg64_relaxed
 
 static inline s64 arch_atomic64_xchg(atomic64_t *ptr, s64 new)
 {
@@ -179,14 +175,7 @@ static inline s64 arch_atomic64_xchg(atomic64_t *ptr, s64 new)
 
 	return prev;
 }
-
-/**
- * arch_atomic64_dec_if_positive - decrement by 1 if old value positive
- * @v: pointer of type atomic64_t
- *
- * The function returns the old value of *v minus 1, even if
- * the atomic variable, v, was not decremented.
- */
+#define arch_atomic64_xchg arch_atomic64_xchg
 
 static inline s64 arch_atomic64_dec_if_positive(atomic64_t *v)
 {
@@ -212,15 +201,6 @@ static inline s64 arch_atomic64_dec_if_positive(atomic64_t *v)
 }
 #define arch_atomic64_dec_if_positive arch_atomic64_dec_if_positive
 
-/**
- * arch_atomic64_fetch_add_unless - add unless the number is a given value
- * @v: pointer of type atomic64_t
- * @a: the amount to add to v...
- * @u: ...unless v is equal to u.
- *
- * Atomically adds @a to @v, if it was not @u.
- * Returns the old value of @v
- */
 static inline s64 arch_atomic64_fetch_add_unless(atomic64_t *v, s64 a, s64 u)
 {
 	s64 old, temp;
diff --git a/arch/arc/include/asm/bitops.h b/arch/arc/include/asm/bitops.h
index a7daaf64ae34..df894235fdbc 100644
--- a/arch/arc/include/asm/bitops.h
+++ b/arch/arc/include/asm/bitops.h
@@ -10,7 +10,7 @@
 #error only <linux/bitops.h> can be included directly
 #endif
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/types.h>
 #include <linux/compiler.h>
@@ -82,7 +82,7 @@ static inline __attribute__ ((const)) int fls(unsigned int x)
 /*
  * __fls: Similar to fls, but zero based (0-31)
  */
-static inline __attribute__ ((const)) int __fls(unsigned long x)
+static inline __attribute__ ((const)) unsigned long __fls(unsigned long x)
 {
 	if (!x)
 		return 0;
@@ -131,8 +131,10 @@ static inline __attribute__ ((const)) int fls(unsigned int x)
 /*
  * __fls: Similar to fls, but zero based (0-31). Also 0 if no bit set
  */
-static inline __attribute__ ((const)) int __fls(unsigned long x)
+static inline __attribute__ ((const)) unsigned long __fls(unsigned long x)
 {
+	if (__builtin_constant_p(x))
+		return x ? BITS_PER_LONG - 1 - __builtin_clzl(x) : 0;
 	/* FLS insn has exactly same semantics as the API */
 	return	__builtin_arc_fls(x);
 }
@@ -189,10 +191,9 @@ static inline __attribute__ ((const)) unsigned long __ffs(unsigned long x)
 #include <asm-generic/bitops/atomic.h>
 #include <asm-generic/bitops/non-atomic.h>
 
-#include <asm-generic/bitops/find.h>
 #include <asm-generic/bitops/le.h>
 #include <asm-generic/bitops/ext2-atomic-setbit.h>
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif
diff --git a/arch/arc/include/asm/bug.h b/arch/arc/include/asm/bug.h
index 4c453ba96c51..171c16021f70 100644
--- a/arch/arc/include/asm/bug.h
+++ b/arch/arc/include/asm/bug.h
@@ -6,7 +6,7 @@
 #ifndef _ASM_ARC_BUG_H
 #define _ASM_ARC_BUG_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <asm/ptrace.h>
 
@@ -29,6 +29,6 @@ void die(const char *str, struct pt_regs *regs, unsigned long address);
 
 #include <asm-generic/bug.h>
 
-#endif	/* !__ASSEMBLY__ */
+#endif	/* !__ASSEMBLER__ */
 
 #endif
diff --git a/arch/arc/include/asm/cache.h b/arch/arc/include/asm/cache.h
index f0f1fc5d62b6..040a97f4dd82 100644
--- a/arch/arc/include/asm/cache.h
+++ b/arch/arc/include/asm/cache.h
@@ -23,7 +23,7 @@
  */
 #define ARC_UNCACHED_ADDR_SPACE	0xc0000000
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/build_bug.h>
 
@@ -65,7 +65,7 @@
 extern int ioc_enable;
 extern unsigned long perip_base, perip_end;
 
-#endif	/* !__ASSEMBLY__ */
+#endif	/* !__ASSEMBLER__ */
 
 /* Instruction cache related Auxiliary registers */
 #define ARC_REG_IC_BCR		0x77	/* Build Config reg */
diff --git a/arch/arc/include/asm/cacheflush.h b/arch/arc/include/asm/cacheflush.h
index e201b4b1655a..329c94cd45d8 100644
--- a/arch/arc/include/asm/cacheflush.h
+++ b/arch/arc/include/asm/cacheflush.h
@@ -18,24 +18,18 @@
 #include <linux/mm.h>
 #include <asm/shmparam.h>
 
-/*
- * Semantically we need this because icache doesn't snoop dcache/dma.
- * However ARC Cache flush requires paddr as well as vaddr, latter not available
- * in the flush_icache_page() API. So we no-op it but do the equivalent work
- * in update_mmu_cache()
- */
-#define flush_icache_page(vma, page)
-
 void flush_cache_all(void);
 
 void flush_icache_range(unsigned long kstart, unsigned long kend);
 void __sync_icache_dcache(phys_addr_t paddr, unsigned long vaddr, int len);
-void __inv_icache_page(phys_addr_t paddr, unsigned long vaddr);
-void __flush_dcache_page(phys_addr_t paddr, unsigned long vaddr);
+void __inv_icache_pages(phys_addr_t paddr, unsigned long vaddr, unsigned nr);
+void __flush_dcache_pages(phys_addr_t paddr, unsigned long vaddr, unsigned nr);
 
 #define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
 
 void flush_dcache_page(struct page *page);
+void flush_dcache_folio(struct folio *folio);
+#define flush_dcache_folio flush_dcache_folio
 
 void dma_cache_wback_inv(phys_addr_t start, unsigned long sz);
 void dma_cache_inv(phys_addr_t start, unsigned long sz);
@@ -46,35 +40,15 @@ void dma_cache_wback(phys_addr_t start, unsigned long sz);
 
 /* TBD: optimize this */
 #define flush_cache_vmap(start, end)		flush_cache_all()
+#define flush_cache_vmap_early(start, end)	do { } while (0)
 #define flush_cache_vunmap(start, end)		flush_cache_all()
 
 #define flush_cache_dup_mm(mm)			/* called on fork (VIVT only) */
 
-#ifndef CONFIG_ARC_CACHE_VIPT_ALIASING
-
 #define flush_cache_mm(mm)			/* called on munmap/exit */
 #define flush_cache_range(mm, u_vstart, u_vend)
 #define flush_cache_page(vma, u_vaddr, pfn)	/* PF handling/COW-break */
 
-#else	/* VIPT aliasing dcache */
-
-/* To clear out stale userspace mappings */
-void flush_cache_mm(struct mm_struct *mm);
-void flush_cache_range(struct vm_area_struct *vma,
-	unsigned long start,unsigned long end);
-void flush_cache_page(struct vm_area_struct *vma,
-	unsigned long user_addr, unsigned long page);
-
-/*
- * To make sure that userspace mapping is flushed to memory before
- * get_user_pages() uses a kernel mapping to access the page
- */
-#define ARCH_HAS_FLUSH_ANON_PAGE
-void flush_anon_page(struct vm_area_struct *vma,
-	struct page *page, unsigned long u_vaddr);
-
-#endif	/* CONFIG_ARC_CACHE_VIPT_ALIASING */
-
 /*
  * A new pagecache page has PG_arch_1 clear - thus dcache dirty by default
  * This works around some PIO based drivers which don't call flush_dcache_page
@@ -82,28 +56,6 @@ void flush_anon_page(struct vm_area_struct *vma,
  */
 #define PG_dc_clean	PG_arch_1
 
-#define CACHE_COLORS_NUM	4
-#define CACHE_COLORS_MSK	(CACHE_COLORS_NUM - 1)
-#define CACHE_COLOR(addr)	(((unsigned long)(addr) >> (PAGE_SHIFT)) & CACHE_COLORS_MSK)
-
-/*
- * Simple wrapper over config option
- * Bootup code ensures that hardware matches kernel configuration
- */
-static inline int cache_is_vipt_aliasing(void)
-{
-	return IS_ENABLED(CONFIG_ARC_CACHE_VIPT_ALIASING);
-}
-
-/*
- * checks if two addresses (after page aligning) index into same cache set
- */
-#define addr_not_cache_congruent(addr1, addr2)				\
-({									\
-	cache_is_vipt_aliasing() ? 					\
-		(CACHE_COLOR(addr1) != CACHE_COLOR(addr2)) : 0;		\
-})
-
 #define copy_to_user_page(vma, page, vaddr, dst, src, len)		\
 do {									\
 	memcpy(dst, src, len);						\
diff --git a/arch/arc/include/asm/cachetype.h b/arch/arc/include/asm/cachetype.h
new file mode 100644
index 000000000000..acd3b6cb4bf5
--- /dev/null
+++ b/arch/arc/include/asm/cachetype.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_ARC_CACHETYPE_H
+#define __ASM_ARC_CACHETYPE_H
+
+#define cpu_dcache_is_aliasing()	false
+#define cpu_icache_is_aliasing()	true
+
+#endif
diff --git a/arch/arc/include/asm/cmpxchg.h b/arch/arc/include/asm/cmpxchg.h
index c5b544a5fe81..76f43db0890f 100644
--- a/arch/arc/include/asm/cmpxchg.h
+++ b/arch/arc/include/asm/cmpxchg.h
@@ -8,6 +8,7 @@
 
 #include <linux/build_bug.h>
 #include <linux/types.h>
+#include <linux/cmpxchg-emu.h>
 
 #include <asm/barrier.h>
 #include <asm/smp.h>
@@ -46,6 +47,9 @@
 	__typeof__(*(ptr)) _prev_;					\
 									\
 	switch(sizeof((_p_))) {						\
+	case 1:								\
+		_prev_ = (__typeof__(*(ptr)))cmpxchg_emu_u8((volatile u8 *__force)_p_, (uintptr_t)_o_, (uintptr_t)_n_);	\
+		break;							\
 	case 4:								\
 		_prev_ = __cmpxchg(_p_, _o_, _n_);			\
 		break;							\
@@ -65,8 +69,6 @@
 	__typeof__(*(ptr)) _prev_;					\
 	unsigned long __flags;						\
 									\
-	BUILD_BUG_ON(sizeof(_p_) != 4);					\
-									\
 	/*								\
 	 * spin lock/unlock provide the needed smp_mb() before/after	\
 	 */								\
@@ -85,7 +87,7 @@
  */
 #ifdef CONFIG_ARC_HAS_LLSC
 
-#define __xchg(ptr, val)						\
+#define __arch_xchg(ptr, val)						\
 ({									\
 	__asm__ __volatile__(						\
 	"	ex  %0, [%1]	\n"	/* set new value */	        \
@@ -102,7 +104,7 @@
 									\
 	switch(sizeof(*(_p_))) {					\
 	case 4:								\
-		_val_ = __xchg(_p_, _val_);				\
+		_val_ = __arch_xchg(_p_, _val_);			\
 		break;							\
 	default:							\
 		BUILD_BUG();						\
diff --git a/arch/arc/include/asm/current.h b/arch/arc/include/asm/current.h
index 9b9bdd3e6538..03ffd005f3fa 100644
--- a/arch/arc/include/asm/current.h
+++ b/arch/arc/include/asm/current.h
@@ -9,17 +9,17 @@
 #ifndef _ASM_ARC_CURRENT_H
 #define _ASM_ARC_CURRENT_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #ifdef CONFIG_ARC_CURR_IN_REG
 
-register struct task_struct *curr_arc asm("r25");
+register struct task_struct *curr_arc asm("gp");
 #define current (curr_arc)
 
 #else
 #include <asm-generic/current.h>
 #endif /* ! CONFIG_ARC_CURR_IN_REG */
 
-#endif /* ! __ASSEMBLY__ */
+#endif /* ! __ASSEMBLER__ */
 
 #endif /* _ASM_ARC_CURRENT_H */
diff --git a/arch/arc/include/asm/dma.h b/arch/arc/include/asm/dma.h
index 5b744f4b10a7..02431027ed2f 100644
--- a/arch/arc/include/asm/dma.h
+++ b/arch/arc/include/asm/dma.h
@@ -7,10 +7,5 @@
 #define ASM_ARC_DMA_H
 
 #define MAX_DMA_ADDRESS 0xC0000000
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy	0
-#endif
 
 #endif
diff --git a/arch/arc/include/asm/dsp-impl.h b/arch/arc/include/asm/dsp-impl.h
index cd5636dfeb6f..fd5fdaad90c1 100644
--- a/arch/arc/include/asm/dsp-impl.h
+++ b/arch/arc/include/asm/dsp-impl.h
@@ -11,7 +11,7 @@
 
 #define DSP_CTRL_DISABLED_ALL		0
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 /* clobbers r5 register */
 .macro DSP_EARLY_INIT
diff --git a/arch/arc/include/asm/dsp.h b/arch/arc/include/asm/dsp.h
index 202c78e56704..eeaaf4e4eabd 100644
--- a/arch/arc/include/asm/dsp.h
+++ b/arch/arc/include/asm/dsp.h
@@ -7,12 +7,12 @@
 #ifndef __ASM_ARC_DSP_H
 #define __ASM_ARC_DSP_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /*
  * DSP-related saved registers - need to be saved only when you are
  * scheduled out.
- * structure fields name must correspond to aux register defenitions for
+ * structure fields name must correspond to aux register definitions for
  * automatic offset calculation in DSP_AUX_SAVE_RESTORE macros
  */
 struct dsp_callee_regs {
@@ -24,6 +24,6 @@ struct dsp_callee_regs {
 #endif
 };
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* __ASM_ARC_DSP_H */
diff --git a/arch/arc/include/asm/dwarf.h b/arch/arc/include/asm/dwarf.h
index 5f4de05bd4ee..1524c5cf8b59 100644
--- a/arch/arc/include/asm/dwarf.h
+++ b/arch/arc/include/asm/dwarf.h
@@ -6,30 +6,38 @@
 #ifndef _ASM_ARC_DWARF_H
 #define _ASM_ARC_DWARF_H
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 #ifdef ARC_DW2_UNWIND_AS_CFI
 
-#define CFI_STARTPROC	.cfi_startproc
-#define CFI_ENDPROC	.cfi_endproc
-#define CFI_DEF_CFA	.cfi_def_cfa
-#define CFI_REGISTER	.cfi_register
-#define CFI_REL_OFFSET	.cfi_rel_offset
-#define CFI_UNDEFINED	.cfi_undefined
+#define CFI_STARTPROC		.cfi_startproc
+#define CFI_ENDPROC		.cfi_endproc
+#define CFI_DEF_CFA		.cfi_def_cfa
+#define CFI_DEF_CFA_OFFSET	.cfi_def_cfa_offset
+#define CFI_DEF_CFA_REGISTER	.cfi_def_cfa_register
+#define CFI_OFFSET		.cfi_offset
+#define CFI_REL_OFFSET		.cfi_rel_offset
+#define CFI_REGISTER		.cfi_register
+#define CFI_RESTORE		.cfi_restore
+#define CFI_UNDEFINED		.cfi_undefined
 
 #else
 
 #define CFI_IGNORE	#
 
-#define CFI_STARTPROC	CFI_IGNORE
-#define CFI_ENDPROC	CFI_IGNORE
-#define CFI_DEF_CFA	CFI_IGNORE
-#define CFI_REGISTER	CFI_IGNORE
-#define CFI_REL_OFFSET	CFI_IGNORE
-#define CFI_UNDEFINED	CFI_IGNORE
+#define CFI_STARTPROC		CFI_IGNORE
+#define CFI_ENDPROC		CFI_IGNORE
+#define CFI_DEF_CFA		CFI_IGNORE
+#define CFI_DEF_CFA_OFFSET	CFI_IGNORE
+#define CFI_DEF_CFA_REGISTER	CFI_IGNORE
+#define CFI_OFFSET		CFI_IGNORE
+#define CFI_REL_OFFSET		CFI_IGNORE
+#define CFI_REGISTER		CFI_IGNORE
+#define CFI_RESTORE		CFI_IGNORE
+#define CFI_UNDEFINED		CFI_IGNORE
 
 #endif	/* !ARC_DW2_UNWIND_AS_CFI */
 
-#endif	/* __ASSEMBLY__ */
+#endif	/* __ASSEMBLER__ */
 
 #endif	/* _ASM_ARC_DWARF_H */
diff --git a/arch/arc/include/asm/entry-arcv2.h b/arch/arc/include/asm/entry-arcv2.h
index 0ff4c0610561..3802a2daaf86 100644
--- a/arch/arc/include/asm/entry-arcv2.h
+++ b/arch/arc/include/asm/entry-arcv2.h
@@ -18,7 +18,6 @@
  *              |      orig_r0      |
  *              |      event/ECR    |
  *              |      bta          |
- *              |      user_r25     |
  *              |      gp           |
  *              |      fp           |
  *              |      sp           |
@@ -49,14 +48,18 @@
 /*------------------------------------------------------------------------*/
 .macro INTERRUPT_PROLOGUE
 
-	; (A) Before jumping to Interrupt Vector, hardware micro-ops did following:
+	; Before jumping to Interrupt Vector, hardware micro-ops did following:
 	;   1. SP auto-switched to kernel mode stack
 	;   2. STATUS32.Z flag set if in U mode at time of interrupt (U:1,K:0)
 	;   3. Auto save: (mandatory) Push PC and STAT32 on stack
 	;                 hardware does even if CONFIG_ARC_IRQ_NO_AUTOSAVE
-	;   4. Auto save: (optional) r0-r11, blink, LPE,LPS,LPC, JLI,LDI,EI
+	;  4a. Auto save: (optional) r0-r11, blink, LPE,LPS,LPC, JLI,LDI,EI
 	;
-	; (B) Manually saved some regs: r12,r25,r30, sp,fp,gp, ACCL pair
+	; Now
+	;  4b. If Auto-save (optional) not enabled in hw, manually save them
+	;   5. Manually save: r12,r30, sp,fp,gp, ACCL pair
+	;
+	; At the end, SP points to pt_regs
 
 #ifdef CONFIG_ARC_IRQ_NO_AUTOSAVE
 	; carve pt_regs on stack (case #3), PC/STAT32 already on stack
@@ -72,15 +75,16 @@
 .endm
 
 /*------------------------------------------------------------------------*/
-.macro EXCEPTION_PROLOGUE
+.macro EXCEPTION_PROLOGUE_KEEP_AE
 
-	; (A) Before jumping to Exception Vector, hardware micro-ops did following:
+	; Before jumping to Exception Vector, hardware micro-ops did following:
 	;   1. SP auto-switched to kernel mode stack
 	;   2. STATUS32.Z flag set if in U mode at time of exception (U:1,K:0)
 	;
-	; (B) Manually save the complete reg file below
+	; Now manually save rest of reg file
+	; At the end, SP points to pt_regs
 
-	sub	sp, sp, SZ_PT_REGS	; carve pt_regs
+	sub	sp, sp, SZ_PT_REGS	; carve space for pt_regs
 
 	; _HARD saves r10 clobbered by _SOFT as scratch hence comes first
 
@@ -100,6 +104,16 @@
 	; OUTPUT: r10 has ECR expected by EV_Trap
 .endm
 
+.macro EXCEPTION_PROLOGUE
+
+	EXCEPTION_PROLOGUE_KEEP_AE	; return ECR in r10
+
+	lr  r0, [efa]
+	mov r1, sp
+
+	FAKE_RET_FROM_EXCPN		; clobbers r9
+.endm
+
 /*------------------------------------------------------------------------
  * This macro saves the registers manually which would normally be autosaved
  * by hardware on taken interrupts. It is used by
@@ -135,10 +149,10 @@
  */
 .macro __SAVE_REGFILE_SOFT
 
-	ST2	gp, fp, PT_r26		; gp (r26), fp (r27)
-
-	st	r12, [sp, PT_sp + 4]
-	st	r30, [sp, PT_sp + 8]
+	st	fp,  [sp, PT_fp]	; r27
+	st	r30, [sp, PT_r30]
+	st	r12, [sp, PT_r12]
+	st	r26, [sp, PT_r26]	; gp
 
 	; Saving pt_regs->sp correctly requires some extra work due to the way
 	; Auto stack switch works
@@ -153,30 +167,30 @@
 
 	; ISA requires ADD.nz to have same dest and src reg operands
 	mov.nz	r10, sp
-	add.nz	r10, r10, SZ_PT_REGS	; K mode SP
+	add2.nz	r10, r10, SZ_PT_REGS/4	; K mode SP
 
 	st	r10, [sp, PT_sp]	; SP (pt_regs->sp)
 
-#ifdef CONFIG_ARC_CURR_IN_REG
-	st	r25, [sp, PT_user_r25]
-	GET_CURR_TASK_ON_CPU	r25
-#endif
-
 #ifdef CONFIG_ARC_HAS_ACCL_REGS
 	ST2	r58, r59, PT_r58
 #endif
 
 	/* clobbers r10, r11 registers pair */
 	DSP_SAVE_REGFILE_IRQ
+
+#ifdef CONFIG_ARC_CURR_IN_REG
+	GET_CURR_TASK_ON_CPU	gp
+#endif
+
 .endm
 
 /*------------------------------------------------------------------------*/
 .macro __RESTORE_REGFILE_SOFT
 
-	LD2	gp, fp, PT_r26		; gp (r26), fp (r27)
-
-	ld	r12, [sp, PT_r12]
+	ld	fp,  [sp, PT_fp]
 	ld	r30, [sp, PT_r30]
+	ld	r12, [sp, PT_r12]
+	ld	r26, [sp, PT_r26]
 
 	; Restore SP (into AUX_USER_SP) only if returning to U mode
 	;  - for K mode, it will be implicitly restored as stack is unwound
@@ -188,10 +202,6 @@
 	sr	r10, [AUX_USER_SP]
 1:
 
-#ifdef CONFIG_ARC_CURR_IN_REG
-	ld	r25, [sp, PT_user_r25]
-#endif
-
 	/* clobbers r10, r11 registers pair */
 	DSP_RESTORE_REGFILE_IRQ
 
@@ -249,7 +259,7 @@
 
 	btst	r0, STATUS_U_BIT	; Z flag set if K, used in restoring SP
 
-	ld	r10, [sp, PT_event + 4]
+	ld	r10, [sp, PT_bta]
 	sr	r10, [erbta]
 
 	LD2	r10, r11, PT_ret
@@ -264,8 +274,8 @@
 
 .macro FAKE_RET_FROM_EXCPN
 	lr      r9, [status32]
-	bic     r9, r9, STATUS_AE_MASK
-	or      r9, r9, STATUS_IE_MASK
+	bclr    r9, r9, STATUS_AE_BIT
+	bset    r9, r9, STATUS_IE_BIT
 	kflag   r9
 .endm
 
@@ -281,4 +291,36 @@
 				/* M = 8-1  N = 8 */
 .endm
 
+.macro SAVE_ABI_CALLEE_REGS
+	push	r13
+	push	r14
+	push	r15
+	push	r16
+	push	r17
+	push	r18
+	push	r19
+	push	r20
+	push	r21
+	push	r22
+	push	r23
+	push	r24
+	push	r25
+.endm
+
+.macro RESTORE_ABI_CALLEE_REGS
+	pop	r25
+	pop	r24
+	pop	r23
+	pop	r22
+	pop	r21
+	pop	r20
+	pop	r19
+	pop	r18
+	pop	r17
+	pop	r16
+	pop	r15
+	pop	r14
+	pop	r13
+.endm
+
 #endif
diff --git a/arch/arc/include/asm/entry-compact.h b/arch/arc/include/asm/entry-compact.h
index 5aab4f93ab8a..00946fe04c9b 100644
--- a/arch/arc/include/asm/entry-compact.h
+++ b/arch/arc/include/asm/entry-compact.h
@@ -7,7 +7,7 @@
  *  Stack switching code can no longer reliably rely on the fact that
  *  if we are NOT in user mode, stack is switched to kernel mode.
  *  e.g. L2 IRQ interrupted a L1 ISR which had not yet completed
- *  it's prologue including stack switching from user mode
+ *  its prologue including stack switching from user mode
  *
  * Vineetg: Aug 28th 2008: Bug #94984
  *  -Zero Overhead Loop Context shd be cleared when entering IRQ/EXcp/Trap
@@ -21,7 +21,7 @@
  *      r25 contains the kernel current task ptr
  *  - Defined Stack Switching Macro to be reused in all intr/excp hdlrs
  *  - Shaved off 11 instructions from RESTORE_ALL_INT1 by using the
- *      address Write back load ld.ab instead of seperate ld/add instn
+ *      address Write back load ld.ab instead of separate ld/add instn
  *
  * Amit Bhor, Sameer Dhavale: Codito Technologies 2004
  */
@@ -33,6 +33,91 @@
 #include <asm/irqflags-compact.h>
 #include <asm/thread_info.h>	/* For THREAD_SIZE */
 
+/* Note on the LD/ST addr modes with addr reg wback
+ *
+ * LD.a same as LD.aw
+ *
+ * LD.a    reg1, [reg2, x]  => Pre Incr
+ *      Eff Addr for load = [reg2 + x]
+ *
+ * LD.ab   reg1, [reg2, x]  => Post Incr
+ *      Eff Addr for load = [reg2]
+ */
+
+.macro PUSHAX aux
+	lr	r9, [\aux]
+	push	r9
+.endm
+
+.macro POPAX aux
+	pop	r9
+	sr	r9, [\aux]
+.endm
+
+.macro  SAVE_R0_TO_R12
+	push	r0
+	push	r1
+	push	r2
+	push	r3
+	push	r4
+	push	r5
+	push	r6
+	push	r7
+	push	r8
+	push	r9
+	push	r10
+	push	r11
+	push	r12
+.endm
+
+.macro RESTORE_R12_TO_R0
+	pop	r12
+	pop	r11
+	pop	r10
+	pop	r9
+	pop	r8
+	pop	r7
+	pop	r6
+	pop	r5
+	pop	r4
+	pop	r3
+	pop	r2
+	pop	r1
+	pop	r0
+.endm
+
+.macro SAVE_ABI_CALLEE_REGS
+	push	r13
+	push	r14
+	push	r15
+	push	r16
+	push	r17
+	push	r18
+	push	r19
+	push	r20
+	push	r21
+	push	r22
+	push	r23
+	push	r24
+	push	r25
+.endm
+
+.macro RESTORE_ABI_CALLEE_REGS
+	pop	r25
+	pop	r24
+	pop	r23
+	pop	r22
+	pop	r21
+	pop	r20
+	pop	r19
+	pop	r18
+	pop	r17
+	pop	r16
+	pop	r15
+	pop	r14
+	pop	r13
+.endm
+
 /*--------------------------------------------------------------
  * Switch to Kernel Mode stack if SP points to User Mode stack
  *
@@ -58,7 +143,7 @@
 	 * 2. L1 IRQ taken, ISR starts (CPU auto-switched to KERNEL mode)
 	 * 3. But before it could switch SP from USER to KERNEL stack
 	 *      a L2 IRQ "Interrupts" L1
-	 * Thay way although L2 IRQ happened in Kernel mode, stack is still
+	 * That way although L2 IRQ happened in Kernel mode, stack is still
 	 * not switched.
 	 * To handle this, we may need to switch stack even if in kernel mode
 	 * provided SP has values in range of USER mode stack ( < 0x7000_0000 )
@@ -88,7 +173,7 @@
 
 	GET_CURR_TASK_ON_CPU   r9
 
-	/* With current tsk in r9, get it's kernel mode stack base */
+	/* With current tsk in r9, get its kernel mode stack base */
 	GET_TSK_STACK_BASE  r9, r9
 
 	/* save U mode SP @ pt_regs->sp */
@@ -140,7 +225,7 @@
  *
  * After this it is safe to call the "C" handlers
  *-------------------------------------------------------------*/
-.macro EXCEPTION_PROLOGUE
+.macro EXCEPTION_PROLOGUE_KEEP_AE
 
 	/* Need at least 1 reg to code the early exception prologue */
 	PROLOG_FREEUP_REG r9, @ex_saved_reg1
@@ -151,14 +236,6 @@
 	/* ARC700 doesn't provide auto-stack switching */
 	SWITCH_TO_KERNEL_STK
 
-#ifdef CONFIG_ARC_CURR_IN_REG
-	/* Treat r25 as scratch reg (save on stack) and load with "current" */
-	PUSH    r25
-	GET_CURR_TASK_ON_CPU   r25
-#else
-	sub     sp, sp, 4
-#endif
-
 	st.a	r0, [sp, -8]    /* orig_r0 needed for syscall (skip ECR slot) */
 	sub	sp, sp, 4	/* skip pt_regs->sp, already saved above */
 
@@ -178,7 +255,23 @@
 	PUSHAX	erbta
 
 	lr	r10, [ecr]
-	st      r10, [sp, PT_event]    /* EV_Trap expects r10 to have ECR */
+	st      r10, [sp, PT_event]
+
+#ifdef CONFIG_ARC_CURR_IN_REG
+	/* gp already saved on stack: now load with "current" */
+	GET_CURR_TASK_ON_CPU   gp
+#endif
+	; OUTPUT: r10 has ECR expected by EV_Trap
+.endm
+
+.macro EXCEPTION_PROLOGUE
+
+	EXCEPTION_PROLOGUE_KEEP_AE	; return ECR in r10
+
+	lr  r0, [efa]
+	mov r1, sp
+
+	FAKE_RET_FROM_EXCPN		; clobbers r9
 .endm
 
 /*--------------------------------------------------------------
@@ -189,7 +282,7 @@
  * NOTE:
  *
  * It is recommended that lp_count/ilink1/ilink2 not be used as a dest reg
- * for memory load operations. If used in that way interrupts are deffered
+ * for memory load operations. If used in that way interrupts are deferred
  * by hardware and that is not good.
  *-------------------------------------------------------------*/
 .macro EXCEPTION_EPILOGUE
@@ -208,11 +301,8 @@
 	POP	gp
 	RESTORE_R12_TO_R0
 
-#ifdef CONFIG_ARC_CURR_IN_REG
-	ld	r25, [sp, 12]
-#endif
 	ld  sp, [sp] /* restore original sp */
-	/* orig_r0, ECR, user_r25 skipped automatically */
+	/* orig_r0, ECR skipped automatically */
 .endm
 
 /* Dummy ECR values for Interrupts */
@@ -229,15 +319,8 @@
 
 	SWITCH_TO_KERNEL_STK
 
-#ifdef CONFIG_ARC_CURR_IN_REG
-	/* Treat r25 as scratch reg (save on stack) and load with "current" */
-	PUSH    r25
-	GET_CURR_TASK_ON_CPU   r25
-#else
-	sub     sp, sp, 4
-#endif
 
-	PUSH	0x003\LVL\()abcd    /* Dummy ECR */
+	st.a	0x003\LVL\()abcd, [sp, -4]	/* Dummy ECR */
 	sub	sp, sp, 8	    /* skip orig_r0 (not needed)
 				       skip pt_regs->sp, already saved above */
 
@@ -255,6 +338,10 @@
 	PUSHAX	lp_start
 	PUSHAX	bta_l\LVL\()
 
+#ifdef CONFIG_ARC_CURR_IN_REG
+	/* gp already saved on stack: now load with "current" */
+	GET_CURR_TASK_ON_CPU   gp
+#endif
 .endm
 
 /*--------------------------------------------------------------
@@ -263,7 +350,7 @@
  * NOTE:
  *
  * It is recommended that lp_count/ilink1/ilink2 not be used as a dest reg
- * for memory load operations. If used in that way interrupts are deffered
+ * for memory load operations. If used in that way interrupts are deferred
  * by hardware and that is not good.
  *-------------------------------------------------------------*/
 .macro INTERRUPT_EPILOGUE  LVL
@@ -282,11 +369,7 @@
 	POP	gp
 	RESTORE_R12_TO_R0
 
-#ifdef CONFIG_ARC_CURR_IN_REG
-	ld	r25, [sp, 12]
-#endif
-	ld  sp, [sp] /* restore original sp */
-	/* orig_r0, ECR, user_r25 skipped automatically */
+	ld  sp, [sp] /* restore original sp; orig_r0, ECR skipped implicitly */
 .endm
 
 /* Get thread_info of "current" tsk */
diff --git a/arch/arc/include/asm/entry.h b/arch/arc/include/asm/entry.h
index fcdd59d77f42..f453af251a1a 100644
--- a/arch/arc/include/asm/entry.h
+++ b/arch/arc/include/asm/entry.h
@@ -7,193 +7,45 @@
 #ifndef __ASM_ARC_ENTRY_H
 #define __ASM_ARC_ENTRY_H
 
-#include <asm/unistd.h>		/* For NR_syscalls defination */
+#include <asm/unistd.h>		/* For NR_syscalls definition */
 #include <asm/arcregs.h>
 #include <asm/ptrace.h>
 #include <asm/processor.h>	/* For VMALLOC_START */
 #include <asm/mmu.h>
 
+#ifdef __ASSEMBLER__
+
 #ifdef CONFIG_ISA_ARCOMPACT
 #include <asm/entry-compact.h>	/* ISA specific bits */
 #else
 #include <asm/entry-arcv2.h>
 #endif
 
-/* Note on the LD/ST addr modes with addr reg wback
- *
- * LD.a same as LD.aw
- *
- * LD.a    reg1, [reg2, x]  => Pre Incr
- *      Eff Addr for load = [reg2 + x]
- *
- * LD.ab   reg1, [reg2, x]  => Post Incr
- *      Eff Addr for load = [reg2]
+/*
+ * save user mode callee regs as struct callee_regs
+ *  - needed by fork/do_signal/unaligned-access-emulation.
  */
-
-.macro PUSH reg
-	st.a	\reg, [sp, -4]
-.endm
-
-.macro PUSHAX aux
-	lr	r9, [\aux]
-	PUSH	r9
-.endm
-
-.macro POP reg
-	ld.ab	\reg, [sp, 4]
-.endm
-
-.macro POPAX aux
-	POP	r9
-	sr	r9, [\aux]
-.endm
-
-/*--------------------------------------------------------------
- * Helpers to save/restore Scratch Regs:
- * used by Interrupt/Exception Prologue/Epilogue
- *-------------------------------------------------------------*/
-.macro  SAVE_R0_TO_R12
-	PUSH	r0
-	PUSH	r1
-	PUSH	r2
-	PUSH	r3
-	PUSH	r4
-	PUSH	r5
-	PUSH	r6
-	PUSH	r7
-	PUSH	r8
-	PUSH	r9
-	PUSH	r10
-	PUSH	r11
-	PUSH	r12
-.endm
-
-.macro RESTORE_R12_TO_R0
-	POP	r12
-	POP	r11
-	POP	r10
-	POP	r9
-	POP	r8
-	POP	r7
-	POP	r6
-	POP	r5
-	POP	r4
-	POP	r3
-	POP	r2
-	POP	r1
-	POP	r0
-
-.endm
-
-/*--------------------------------------------------------------
- * Helpers to save/restore callee-saved regs:
- * used by several macros below
- *-------------------------------------------------------------*/
-.macro SAVE_R13_TO_R24
-	PUSH	r13
-	PUSH	r14
-	PUSH	r15
-	PUSH	r16
-	PUSH	r17
-	PUSH	r18
-	PUSH	r19
-	PUSH	r20
-	PUSH	r21
-	PUSH	r22
-	PUSH	r23
-	PUSH	r24
-.endm
-
-.macro RESTORE_R24_TO_R13
-	POP	r24
-	POP	r23
-	POP	r22
-	POP	r21
-	POP	r20
-	POP	r19
-	POP	r18
-	POP	r17
-	POP	r16
-	POP	r15
-	POP	r14
-	POP	r13
-.endm
-
-/*--------------------------------------------------------------
- * Collect User Mode callee regs as struct callee_regs - needed by
- * fork/do_signal/unaligned-access-emulation.
- * (By default only scratch regs are saved on entry to kernel)
- *
- * Special handling for r25 if used for caching Task Pointer.
- * It would have been saved in task->thread.user_r25 already, but to keep
- * the interface same it is copied into regular r25 placeholder in
- * struct callee_regs.
- *-------------------------------------------------------------*/
 .macro SAVE_CALLEE_SAVED_USER
+	SAVE_ABI_CALLEE_REGS
+.endm
 
-	mov	r12, sp		; save SP as ref to pt_regs
-	SAVE_R13_TO_R24
-
-#ifdef CONFIG_ARC_CURR_IN_REG
-	; Retrieve orig r25 and save it with rest of callee_regs
-	ld	r12, [r12, PT_user_r25]
-	PUSH	r12
-#else
-	PUSH	r25
-#endif
-
+/*
+ * restore user mode callee regs as struct callee_regs
+ *  - could have been changed by ptrace tracer or unaligned-access fixup
+ */
+.macro RESTORE_CALLEE_SAVED_USER
+	RESTORE_ABI_CALLEE_REGS
 .endm
 
-/*--------------------------------------------------------------
- * Save kernel Mode callee regs at the time of Contect Switch.
- *
- * Special handling for r25 if used for caching Task Pointer.
- * Kernel simply skips saving it since it will be loaded with
- * incoming task pointer anyways
- *-------------------------------------------------------------*/
+/*
+ * save/restore kernel mode callee regs at the time of context switch
+ */
 .macro SAVE_CALLEE_SAVED_KERNEL
-
-	SAVE_R13_TO_R24
-
-#ifdef CONFIG_ARC_CURR_IN_REG
-	sub     sp, sp, 4
-#else
-	PUSH	r25
-#endif
+	SAVE_ABI_CALLEE_REGS
 .endm
 
-/*--------------------------------------------------------------
- * Opposite of SAVE_CALLEE_SAVED_KERNEL
- *-------------------------------------------------------------*/
 .macro RESTORE_CALLEE_SAVED_KERNEL
-
-#ifdef CONFIG_ARC_CURR_IN_REG
-	add     sp, sp, 4  /* skip usual r25 placeholder */
-#else
-	POP	r25
-#endif
-	RESTORE_R24_TO_R13
-.endm
-
-/*--------------------------------------------------------------
- * Opposite of SAVE_CALLEE_SAVED_USER
- *
- * ptrace tracer or unaligned-access fixup might have changed a user mode
- * callee reg which is saved back to usual r25 storage location
- *-------------------------------------------------------------*/
-.macro RESTORE_CALLEE_SAVED_USER
-
-#ifdef CONFIG_ARC_CURR_IN_REG
-	POP	r12
-#else
-	POP	r25
-#endif
-	RESTORE_R24_TO_R13
-
-	; SP is back to start of pt_regs
-#ifdef CONFIG_ARC_CURR_IN_REG
-	st	r12, [sp, PT_user_r25]
-#endif
+	RESTORE_ABI_CALLEE_REGS
 .endm
 
 /*--------------------------------------------------------------
@@ -204,7 +56,7 @@
 .endm
 
 /*-------------------------------------------------------------
- * given a tsk struct, get to the base of it's kernel mode stack
+ * given a tsk struct, get to the base of its kernel mode stack
  * tsk->thread_info is really a PAGE, whose bottom hoists stack
  * which grows upwards towards thread_info
  *------------------------------------------------------------*/
@@ -229,10 +81,10 @@
 
 #ifdef CONFIG_SMP
 
-/*-------------------------------------------------
+/*
  * Retrieve the current running task on this CPU
- * 1. Determine curr CPU id.
- * 2. Use it to index into _current_task[ ]
+ *  - loads it from backing _current_task[] (and can't use the
+ *    caching reg for current task
  */
 .macro  GET_CURR_TASK_ON_CPU   reg
 	GET_CPU_ID  \reg
@@ -254,7 +106,7 @@
 	add2 \tmp, @_current_task, \tmp
 	st   \tsk, [\tmp]
 #ifdef CONFIG_ARC_CURR_IN_REG
-	mov r25, \tsk
+	mov gp, \tsk
 #endif
 
 .endm
@@ -269,21 +121,20 @@
 .macro  SET_CURR_TASK_ON_CPU    tsk, tmp
 	st  \tsk, [@_current_task]
 #ifdef CONFIG_ARC_CURR_IN_REG
-	mov r25, \tsk
+	mov gp, \tsk
 #endif
 .endm
 
 #endif /* SMP / UNI */
 
-/* ------------------------------------------------------------------
+/*
  * Get the ptr to some field of Current Task at @off in task struct
- *  -Uses r25 for Current task ptr if that is enabled
+ *  - Uses current task cached in reg if enabled
  */
-
 #ifdef CONFIG_ARC_CURR_IN_REG
 
 .macro GET_CURR_TASK_FIELD_PTR  off,  reg
-	add \reg, r25, \off
+	add \reg, gp, \off
 .endm
 
 #else
@@ -295,4 +146,23 @@
 
 #endif	/* CONFIG_ARC_CURR_IN_REG */
 
+#else	/* !__ASSEMBLER__ */
+
+extern void do_signal(struct pt_regs *);
+extern void do_notify_resume(struct pt_regs *);
+extern int do_privilege_fault(unsigned long, struct pt_regs *);
+extern int do_extension_fault(unsigned long, struct pt_regs *);
+extern int insterror_is_error(unsigned long, struct pt_regs *);
+extern int do_memory_error(unsigned long, struct pt_regs *);
+extern int trap_is_brkpt(unsigned long, struct pt_regs *);
+extern int do_misaligned_error(unsigned long, struct pt_regs *);
+extern int do_trap5_error(unsigned long, struct pt_regs *);
+extern int do_misaligned_access(unsigned long, struct pt_regs *, struct callee_regs *);
+extern void do_machine_check_fault(unsigned long, struct pt_regs *);
+extern void do_non_swi_trap(unsigned long, struct pt_regs *);
+extern void do_insterror_or_kprobe(unsigned long, struct pt_regs *);
+extern void do_page_fault(unsigned long, struct pt_regs *);
+
+#endif
+
 #endif  /* __ASM_ARC_ENTRY_H */
diff --git a/arch/arc/include/asm/fb.h b/arch/arc/include/asm/fb.h
deleted file mode 100644
index dc2e303cdbbb..000000000000
--- a/arch/arc/include/asm/fb.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_FB_H_
-#define _ASM_FB_H_
-
-#include <linux/fb.h>
-#include <linux/fs.h>
-#include <asm/page.h>
-
-static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
-				unsigned long off)
-{
-	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-}
-
-static inline int fb_is_primary_device(struct fb_info *info)
-{
-	return 0;
-}
-
-#endif /* _ASM_FB_H_ */
diff --git a/arch/arc/include/asm/hugepage.h b/arch/arc/include/asm/hugepage.h
index 11b0ff26b97b..7765dc105d54 100644
--- a/arch/arc/include/asm/hugepage.h
+++ b/arch/arc/include/asm/hugepage.h
@@ -10,6 +10,13 @@
 #include <linux/types.h>
 #include <asm-generic/pgtable-nopmd.h>
 
+/*
+ * Hugetlb definitions.
+ */
+#define HPAGE_SHIFT		PMD_SHIFT
+#define HPAGE_SIZE		(_AC(1, UL) << HPAGE_SHIFT)
+#define HPAGE_MASK		(~(HPAGE_SIZE - 1))
+
 static inline pte_t pmd_pte(pmd_t pmd)
 {
 	return __pte(pmd_val(pmd));
@@ -21,7 +28,7 @@ static inline pmd_t pte_pmd(pte_t pte)
 }
 
 #define pmd_wrprotect(pmd)	pte_pmd(pte_wrprotect(pmd_pte(pmd)))
-#define pmd_mkwrite(pmd)	pte_pmd(pte_mkwrite(pmd_pte(pmd)))
+#define pmd_mkwrite_novma(pmd)	pte_pmd(pte_mkwrite_novma(pmd_pte(pmd)))
 #define pmd_mkdirty(pmd)	pte_pmd(pte_mkdirty(pmd_pte(pmd)))
 #define pmd_mkold(pmd)		pte_pmd(pte_mkold(pmd_pte(pmd)))
 #define pmd_mkyoung(pmd)	pte_pmd(pte_mkyoung(pmd_pte(pmd)))
@@ -31,11 +38,8 @@ static inline pmd_t pte_pmd(pte_t pte)
 
 #define pmd_write(pmd)		pte_write(pmd_pte(pmd))
 #define pmd_young(pmd)		pte_young(pmd_pte(pmd))
-#define pmd_pfn(pmd)		pte_pfn(pmd_pte(pmd))
 #define pmd_dirty(pmd)		pte_dirty(pmd_pte(pmd))
 
-#define mk_pmd(page, prot)	pte_pmd(mk_pte(page, prot))
-
 #define pmd_trans_huge(pmd)	(pmd_val(pmd) & _PAGE_HW_SZ)
 
 #define pfn_pmd(pfn, prot)	(__pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot)))
diff --git a/arch/arc/include/asm/io.h b/arch/arc/include/asm/io.h
index 8f777d6441a5..00171a212b3c 100644
--- a/arch/arc/include/asm/io.h
+++ b/arch/arc/include/asm/io.h
@@ -9,7 +9,7 @@
 #include <linux/types.h>
 #include <asm/byteorder.h>
 #include <asm/page.h>
-#include <asm/unaligned.h>
+#include <linux/unaligned.h>
 
 #ifdef CONFIG_ISA_ARCV2
 #include <asm/barrier.h>
@@ -21,8 +21,9 @@
 #endif
 
 extern void __iomem *ioremap(phys_addr_t paddr, unsigned long size);
-extern void __iomem *ioremap_prot(phys_addr_t paddr, unsigned long size,
-				  unsigned long flags);
+#define ioremap ioremap
+#define ioremap_prot ioremap_prot
+#define iounmap iounmap
 static inline void __iomem *ioport_map(unsigned long port, unsigned int nr)
 {
 	return (void __iomem *)port;
@@ -32,8 +33,6 @@ static inline void ioport_unmap(void __iomem *addr)
 {
 }
 
-extern void iounmap(const void __iomem *addr);
-
 /*
  * io{read,write}{16,32}be() macros
  */
@@ -43,9 +42,6 @@ extern void iounmap(const void __iomem *addr);
 #define iowrite16be(v,p)	({ __iowmb(); __raw_writew((__force u16)cpu_to_be16(v), p); })
 #define iowrite32be(v,p)	({ __iowmb(); __raw_writel((__force u32)cpu_to_be32(v), p); })
 
-/* Change struct page to physical address */
-#define page_to_phys(page)		(page_to_pfn(page) << PAGE_SHIFT)
-
 #define __raw_readb __raw_readb
 static inline u8 __raw_readb(const volatile void __iomem *addr)
 {
diff --git a/arch/arc/include/asm/irq.h b/arch/arc/include/asm/irq.h
index 0309cb405cfb..9cd79263acba 100644
--- a/arch/arc/include/asm/irq.h
+++ b/arch/arc/include/asm/irq.h
@@ -10,7 +10,7 @@
  * ARCv2 can support 240 interrupts in the core interrupts controllers and
  * 128 interrupts in IDU. Thus 512 virtual IRQs must be enough for most
  * configurations of boards.
- * This doesnt affect ARCompact, but we change it to same value
+ * This doesn't affect ARCompact, but we change it to same value
  */
 #define NR_IRQS		512
 
@@ -25,5 +25,6 @@
 #include <asm-generic/irq.h>
 
 extern void arc_init_IRQ(void);
+extern void arch_do_IRQ(unsigned int, struct pt_regs *);
 
 #endif
diff --git a/arch/arc/include/asm/irqflags-arcv2.h b/arch/arc/include/asm/irqflags-arcv2.h
index fb3c21f1a238..30aea562f8aa 100644
--- a/arch/arc/include/asm/irqflags-arcv2.h
+++ b/arch/arc/include/asm/irqflags-arcv2.h
@@ -50,7 +50,7 @@
 #define ISA_INIT_STATUS_BITS	(STATUS_IE_MASK | __AD_ENB | \
 					(ARCV2_IRQ_DEF_PRIO << 1))
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /*
  * Save IRQ state and disable IRQs
@@ -170,6 +170,6 @@ static inline void arc_softirq_clear(int irq)
 	seti
 .endm
 
-#endif	/* __ASSEMBLY__ */
+#endif	/* __ASSEMBLER__ */
 
 #endif
diff --git a/arch/arc/include/asm/irqflags-compact.h b/arch/arc/include/asm/irqflags-compact.h
index 863d63ad18d6..85c2f6bcde0c 100644
--- a/arch/arc/include/asm/irqflags-compact.h
+++ b/arch/arc/include/asm/irqflags-compact.h
@@ -40,18 +40,22 @@
 
 #define ISA_INIT_STATUS_BITS	STATUS_IE_MASK
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /******************************************************************
  * IRQ Control Macros
  *
  * All of them have "memory" clobber (compiler barrier) which is needed to
- * ensure that LD/ST requiring irq safetly (R-M-W when LLSC is not available)
+ * ensure that LD/ST requiring irq safety (R-M-W when LLSC is not available)
  * are redone after IRQs are re-enabled (and gcc doesn't reuse stale register)
  *
  * Noted at the time of Abilis Timer List corruption
- *	Orig Bug + Rejected solution	: https://lkml.org/lkml/2013/3/29/67
- *	Reasoning			: https://lkml.org/lkml/2013/4/8/15
+ *
+ * Orig Bug + Rejected solution:
+ * https://lore.kernel.org/lkml/1364553218-31255-1-git-send-email-vgupta@synopsys.com
+ *
+ * Reasoning:
+ * https://lore.kernel.org/lkml/CA+55aFyFWjpSVQM6M266tKrG_ZXJzZ-nYejpmXYQXbrr42mGPQ@mail.gmail.com
  *
  ******************************************************************/
 
@@ -192,6 +196,6 @@ static inline int arch_irqs_disabled(void)
 	flag	\scratch
 .endm
 
-#endif	/* __ASSEMBLY__ */
+#endif	/* __ASSEMBLER__ */
 
 #endif
diff --git a/arch/arc/include/asm/jump_label.h b/arch/arc/include/asm/jump_label.h
index 9d9618079739..66ead75784d9 100644
--- a/arch/arc/include/asm/jump_label.h
+++ b/arch/arc/include/asm/jump_label.h
@@ -2,7 +2,7 @@
 #ifndef _ASM_ARC_JUMP_LABEL_H
 #define _ASM_ARC_JUMP_LABEL_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/stringify.h>
 #include <linux/types.h>
@@ -31,7 +31,7 @@
 static __always_inline bool arch_static_branch(struct static_key *key,
 					       bool branch)
 {
-	asm_volatile_goto(".balign "__stringify(JUMP_LABEL_NOP_SIZE)"	\n"
+	asm goto(".balign "__stringify(JUMP_LABEL_NOP_SIZE)"		\n"
 		 "1:							\n"
 		 "nop							\n"
 		 ".pushsection __jump_table, \"aw\"			\n"
@@ -47,7 +47,7 @@ l_yes:
 static __always_inline bool arch_static_branch_jump(struct static_key *key,
 						    bool branch)
 {
-	asm_volatile_goto(".balign "__stringify(JUMP_LABEL_NOP_SIZE)"	\n"
+	asm goto(".balign "__stringify(JUMP_LABEL_NOP_SIZE)"		\n"
 		 "1:							\n"
 		 "b %l[l_yes]						\n"
 		 ".pushsection __jump_table, \"aw\"			\n"
@@ -68,5 +68,5 @@ struct jump_entry {
 	jump_label_t key;
 };
 
-#endif  /* __ASSEMBLY__ */
+#endif  /* __ASSEMBLER__ */
 #endif
diff --git a/arch/arc/include/asm/kprobes.h b/arch/arc/include/asm/kprobes.h
index 2134721dce44..68e8301c0df2 100644
--- a/arch/arc/include/asm/kprobes.h
+++ b/arch/arc/include/asm/kprobes.h
@@ -32,9 +32,6 @@ struct kprobe;
 
 void arch_remove_kprobe(struct kprobe *p);
 
-int kprobe_exceptions_notify(struct notifier_block *self,
-			     unsigned long val, void *data);
-
 struct prev_kprobe {
 	struct kprobe *kp;
 	unsigned long status;
@@ -46,7 +43,7 @@ struct kprobe_ctlblk {
 };
 
 int kprobe_fault_handler(struct pt_regs *regs, unsigned long cause);
-void kretprobe_trampoline(void);
+void __kretprobe_trampoline(void);
 void trap_is_kprobe(unsigned long address, struct pt_regs *regs);
 #else
 #define trap_is_kprobe(address, regs)
diff --git a/arch/arc/include/asm/linkage.h b/arch/arc/include/asm/linkage.h
index c9434ff3aa4c..ba3cb65b5eaa 100644
--- a/arch/arc/include/asm/linkage.h
+++ b/arch/arc/include/asm/linkage.h
@@ -8,7 +8,11 @@
 
 #include <asm/dwarf.h>
 
-#ifdef __ASSEMBLY__
+#define ASM_NL		 `	/* use '`' to mark new line in macro */
+#define __ALIGN		.align 4
+#define __ALIGN_STR	__stringify(__ALIGN)
+
+#ifdef __ASSEMBLER__
 
 .macro ST2 e, o, off
 #ifdef CONFIG_ARC_HAS_LL64
@@ -28,10 +32,6 @@
 #endif
 .endm
 
-#define ASM_NL		 `	/* use '`' to mark new line in macro */
-#define __ALIGN		.align 4
-#define __ALIGN_STR	__stringify(__ALIGN)
-
 /* annotation for data we want in DCCM - if enabled in .config */
 .macro ARCFP_DATA nm
 #ifdef CONFIG_ARC_HAS_DCCM
@@ -61,7 +61,7 @@
 	CFI_ENDPROC ASM_NL	\
 	.size name, .-name
 
-#else	/* !__ASSEMBLY__ */
+#else	/* !__ASSEMBLER__ */
 
 #ifdef CONFIG_ARC_HAS_ICCM
 #define __arcfp_code __section(".text.arcfp")
@@ -75,6 +75,6 @@
 #define __arcfp_data __section(".data")
 #endif
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif
diff --git a/arch/arc/include/asm/mmu-arcv2.h b/arch/arc/include/asm/mmu-arcv2.h
index ed9036d4ede3..5e5482026ac9 100644
--- a/arch/arc/include/asm/mmu-arcv2.h
+++ b/arch/arc/include/asm/mmu-arcv2.h
@@ -9,6 +9,8 @@
 #ifndef _ASM_ARC_MMU_ARCV2_H
 #define _ASM_ARC_MMU_ARCV2_H
 
+#include <soc/arc/arc_aux.h>
+
 /*
  * TLB Management regs
  */
@@ -67,7 +69,7 @@
 
 #define PTE_BITS_NON_RWX_IN_PD1	(PAGE_MASK_PHYS | _PAGE_CACHEABLE)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 struct mm_struct;
 extern int pae40_exist_but_not_enab(void);
@@ -98,6 +100,6 @@ static inline void mmu_setup_pgd(struct mm_struct *mm, void *pgd)
 	sr \reg, [ARC_REG_PID]
 .endm
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif
diff --git a/arch/arc/include/asm/mmu.h b/arch/arc/include/asm/mmu.h
index ca427c30f70e..e3b35ceab582 100644
--- a/arch/arc/include/asm/mmu.h
+++ b/arch/arc/include/asm/mmu.h
@@ -6,7 +6,7 @@
 #ifndef _ASM_ARC_MMU_H
 #define _ASM_ARC_MMU_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/threads.h>	/* NR_CPUS */
 
@@ -14,6 +14,9 @@ typedef struct {
 	unsigned long asid[NR_CPUS];	/* 8 bit MMU PID + Generation cycle */
 } mm_context_t;
 
+struct pt_regs;
+extern void do_tlb_overlap_fault(unsigned long, unsigned long, struct pt_regs *);
+
 #endif
 
 #include <asm/mmu-arcv2.h>
diff --git a/arch/arc/include/asm/mmu_context.h b/arch/arc/include/asm/mmu_context.h
index dda471f5f05b..9963bb1a5733 100644
--- a/arch/arc/include/asm/mmu_context.h
+++ b/arch/arc/include/asm/mmu_context.h
@@ -165,7 +165,7 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
  * for retiring-mm. However destroy_context( ) still needs to do that because
  * between mm_release( ) = >deactive_mm( ) and
  * mmput => .. => __mmdrop( ) => destroy_context( )
- * there is a good chance that task gets sched-out/in, making it's ASID valid
+ * there is a good chance that task gets sched-out/in, making its ASID valid
  * again (this teased me for a whole day).
  */
 
diff --git a/arch/arc/include/asm/page.h b/arch/arc/include/asm/page.h
index 9a62e1d87967..9720fe6b2c24 100644
--- a/arch/arc/include/asm/page.h
+++ b/arch/arc/include/asm/page.h
@@ -19,7 +19,7 @@
 
 #endif /* CONFIG_ARC_HAS_PAE40 */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #define clear_page(paddr)		memset((paddr), 0, PAGE_SIZE)
 #define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
@@ -85,15 +85,6 @@ typedef struct {
 typedef struct page *pgtable_t;
 
 /*
- * Use virt_to_pfn with caution:
- * If used in pte or paddr related macros, it could cause truncation
- * in PAE40 builds
- * As a rule of thumb, only use it in helpers starting with virt_
- * You have been warned !
- */
-#define virt_to_pfn(kaddr)	(__pa(kaddr) >> PAGE_SHIFT)
-
-/*
  * When HIGHMEM is enabled we have holes in the memory map so we need
  * pfn_valid() that takes into account the actual extents of the physical
  * memory
@@ -108,8 +99,7 @@ extern int pfn_valid(unsigned long pfn);
 
 #else /* CONFIG_HIGHMEM */
 
-#define ARCH_PFN_OFFSET		virt_to_pfn(CONFIG_LINUX_RAM_BASE)
-#define pfn_valid(pfn)		(((pfn) - ARCH_PFN_OFFSET) < max_mapnr)
+#define ARCH_PFN_OFFSET		virt_to_pfn((void *)CONFIG_LINUX_RAM_BASE)
 
 #endif /* CONFIG_HIGHMEM */
 
@@ -123,6 +113,18 @@ extern int pfn_valid(unsigned long pfn);
 #define __pa(vaddr)  		((unsigned long)(vaddr))
 #define __va(paddr)  		((void *)((unsigned long)(paddr)))
 
+/*
+ * Use virt_to_pfn with caution:
+ * If used in pte or paddr related macros, it could cause truncation
+ * in PAE40 builds
+ * As a rule of thumb, only use it in helpers starting with virt_
+ * You have been warned !
+ */
+static inline unsigned long virt_to_pfn(const void *kaddr)
+{
+	return __pa(kaddr) >> PAGE_SHIFT;
+}
+
 #define virt_to_page(kaddr)	pfn_to_page(virt_to_pfn(kaddr))
 #define virt_addr_valid(kaddr)  pfn_valid(virt_to_pfn(kaddr))
 
@@ -134,6 +136,6 @@ extern int pfn_valid(unsigned long pfn);
 #include <asm-generic/memory_model.h>   /* page_to_pfn, pfn_to_page */
 #include <asm-generic/getorder.h>
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif
diff --git a/arch/arc/include/asm/perf_event.h b/arch/arc/include/asm/perf_event.h
index e1971d34ef30..d5719a260864 100644
--- a/arch/arc/include/asm/perf_event.h
+++ b/arch/arc/include/asm/perf_event.h
@@ -63,166 +63,8 @@ struct arc_reg_cc_build {
 
 #define PERF_COUNT_ARC_HW_MAX	(PERF_COUNT_HW_MAX + 8)
 
-/*
- * Some ARC pct quirks:
- *
- * PERF_COUNT_HW_STALLED_CYCLES_BACKEND
- * PERF_COUNT_HW_STALLED_CYCLES_FRONTEND
- *	The ARC 700 can either measure stalls per pipeline stage, or all stalls
- *	combined; for now we assign all stalls to STALLED_CYCLES_BACKEND
- *	and all pipeline flushes (e.g. caused by mispredicts, etc.) to
- *	STALLED_CYCLES_FRONTEND.
- *
- *	We could start multiple performance counters and combine everything
- *	afterwards, but that makes it complicated.
- *
- *	Note that I$ cache misses aren't counted by either of the two!
- */
-
-/*
- * ARC PCT has hardware conditions with fixed "names" but variable "indexes"
- * (based on a specific RTL build)
- * Below is the static map between perf generic/arc specific event_id and
- * h/w condition names.
- * At the time of probe, we loop thru each index and find it's name to
- * complete the mapping of perf event_id to h/w index as latter is needed
- * to program the counter really
- */
-static const char * const arc_pmu_ev_hw_map[] = {
-	/* count cycles */
-	[PERF_COUNT_HW_CPU_CYCLES] = "crun",
-	[PERF_COUNT_HW_REF_CPU_CYCLES] = "crun",
-	[PERF_COUNT_HW_BUS_CYCLES] = "crun",
-
-	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = "bflush",
-	[PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = "bstall",
-
-	/* counts condition */
-	[PERF_COUNT_HW_INSTRUCTIONS] = "iall",
-	/* All jump instructions that are taken */
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = "ijmptak",
-#ifdef CONFIG_ISA_ARCV2
-	[PERF_COUNT_HW_BRANCH_MISSES] = "bpmp",
-#else
-	[PERF_COUNT_ARC_BPOK]         = "bpok",	  /* NP-NT, PT-T, PNT-NT */
-	[PERF_COUNT_HW_BRANCH_MISSES] = "bpfail", /* NP-T, PT-NT, PNT-T */
+#ifdef CONFIG_PERF_EVENTS
+#define perf_arch_bpf_user_pt_regs(regs) (struct user_regs_struct *)regs
 #endif
-	[PERF_COUNT_ARC_LDC] = "imemrdc",	/* Instr: mem read cached */
-	[PERF_COUNT_ARC_STC] = "imemwrc",	/* Instr: mem write cached */
-
-	[PERF_COUNT_ARC_DCLM] = "dclm",		/* D-cache Load Miss */
-	[PERF_COUNT_ARC_DCSM] = "dcsm",		/* D-cache Store Miss */
-	[PERF_COUNT_ARC_ICM] = "icm",		/* I-cache Miss */
-	[PERF_COUNT_ARC_EDTLB] = "edtlb",	/* D-TLB Miss */
-	[PERF_COUNT_ARC_EITLB] = "eitlb",	/* I-TLB Miss */
-
-	[PERF_COUNT_HW_CACHE_REFERENCES] = "imemrdc",	/* Instr: mem read cached */
-	[PERF_COUNT_HW_CACHE_MISSES] = "dclm",		/* D-cache Load Miss */
-};
-
-#define C(_x)			PERF_COUNT_HW_CACHE_##_x
-#define CACHE_OP_UNSUPPORTED	0xffff
-
-static const unsigned int arc_pmu_cache_map[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
-	[C(L1D)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= PERF_COUNT_ARC_LDC,
-			[C(RESULT_MISS)]	= PERF_COUNT_ARC_DCLM,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= PERF_COUNT_ARC_STC,
-			[C(RESULT_MISS)]	= PERF_COUNT_ARC_DCSM,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(L1I)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= PERF_COUNT_HW_INSTRUCTIONS,
-			[C(RESULT_MISS)]	= PERF_COUNT_ARC_ICM,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(LL)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(DTLB)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= PERF_COUNT_ARC_LDC,
-			[C(RESULT_MISS)]	= PERF_COUNT_ARC_EDTLB,
-		},
-			/* DTLB LD/ST Miss not segregated by h/w*/
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(ITLB)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= PERF_COUNT_ARC_EITLB,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(BPU)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)] = PERF_COUNT_HW_BRANCH_INSTRUCTIONS,
-			[C(RESULT_MISS)]	= PERF_COUNT_HW_BRANCH_MISSES,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(NODE)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-};
 
 #endif /* __ASM_PERF_EVENT_H */
diff --git a/arch/arc/include/asm/pgalloc.h b/arch/arc/include/asm/pgalloc.h
index 096b8ef58edb..dfae070fe8d5 100644
--- a/arch/arc/include/asm/pgalloc.h
+++ b/arch/arc/include/asm/pgalloc.h
@@ -53,19 +53,14 @@ static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, pgtable_t pte_
 
 static inline pgd_t *pgd_alloc(struct mm_struct *mm)
 {
-	pgd_t *ret = (pgd_t *) __get_free_page(GFP_KERNEL);
+	pgd_t *ret = __pgd_alloc(mm, 0);
 
 	if (ret) {
 		int num, num2;
-		num = USER_PTRS_PER_PGD + USER_KERNEL_GUTTER / PGDIR_SIZE;
-		memzero(ret, num * sizeof(pgd_t));
 
+		num = USER_PTRS_PER_PGD + USER_KERNEL_GUTTER / PGDIR_SIZE;
 		num2 = VMALLOC_SIZE / PGDIR_SIZE;
 		memcpy(ret + num, swapper_pg_dir + num, num2 * sizeof(pgd_t));
-
-		memzero(ret + num + num2,
-			       (PTRS_PER_PGD - num - num2) * sizeof(pgd_t));
-
 	}
 	return ret;
 }
diff --git a/arch/arc/include/asm/pgtable-bits-arcv2.h b/arch/arc/include/asm/pgtable-bits-arcv2.h
index 183d23bc1e00..4630c5acca05 100644
--- a/arch/arc/include/asm/pgtable-bits-arcv2.h
+++ b/arch/arc/include/asm/pgtable-bits-arcv2.h
@@ -26,6 +26,9 @@
 #define _PAGE_GLOBAL		(1 << 8)  /* ASID agnostic (H) */
 #define _PAGE_PRESENT		(1 << 9)  /* PTE/TLB Valid (H) */
 
+/* We borrow bit 5 to store the exclusive marker in swap PTEs. */
+#define _PAGE_SWP_EXCLUSIVE	_PAGE_DIRTY
+
 #ifdef CONFIG_ARC_MMU_V4
 #define _PAGE_HW_SZ		(1 << 10)  /* Normal/super (H) */
 #else
@@ -63,7 +66,7 @@
  * Other rules which cause the divergence from 1:1 mapping
  *
  *  1. Although ARC700 can do exclusive execute/write protection (meaning R
- *     can be tracked independet of X/W unlike some other CPUs), still to
+ *     can be tracked independently of X/W unlike some other CPUs), still to
  *     keep things consistent with other archs:
  *      -Write implies Read:   W => R
  *      -Execute implies Read: X => R
@@ -72,25 +75,7 @@
  *     This is to enable COW mechanism
  */
 	/* xwr */
-#define __P000  PAGE_U_NONE
-#define __P001  PAGE_U_R
-#define __P010  PAGE_U_R	/* Pvt-W => !W */
-#define __P011  PAGE_U_R	/* Pvt-W => !W */
-#define __P100  PAGE_U_X_R	/* X => R */
-#define __P101  PAGE_U_X_R
-#define __P110  PAGE_U_X_R	/* Pvt-W => !W and X => R */
-#define __P111  PAGE_U_X_R	/* Pvt-W => !W */
-
-#define __S000  PAGE_U_NONE
-#define __S001  PAGE_U_R
-#define __S010  PAGE_U_W_R	/* W => R */
-#define __S011  PAGE_U_W_R
-#define __S100  PAGE_U_X_R	/* X => R */
-#define __S101  PAGE_U_X_R
-#define __S110  PAGE_U_X_W_R	/* X => R */
-#define __S111  PAGE_U_X_W_R
-
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #define pte_write(pte)		(pte_val(pte) & _PAGE_WRITE)
 #define pte_dirty(pte)		(pte_val(pte) & _PAGE_DIRTY)
@@ -102,7 +87,7 @@
 
 PTE_BIT_FUNC(mknotpresent,     &= ~(_PAGE_PRESENT));
 PTE_BIT_FUNC(wrprotect,	&= ~(_PAGE_WRITE));
-PTE_BIT_FUNC(mkwrite,	|= (_PAGE_WRITE));
+PTE_BIT_FUNC(mkwrite_novma,	|= (_PAGE_WRITE));
 PTE_BIT_FUNC(mkclean,	&= ~(_PAGE_DIRTY));
 PTE_BIT_FUNC(mkdirty,	|= (_PAGE_DIRTY));
 PTE_BIT_FUNC(mkold,	&= ~(_PAGE_ACCESSED));
@@ -115,18 +100,25 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 	return __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot));
 }
 
-static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
-			      pte_t *ptep, pte_t pteval)
-{
-	set_pte(ptep, pteval);
-}
+struct vm_fault;
+void update_mmu_cache_range(struct vm_fault *vmf, struct vm_area_struct *vma,
+		unsigned long address, pte_t *ptep, unsigned int nr);
 
-void update_mmu_cache(struct vm_area_struct *vma, unsigned long address,
-		      pte_t *ptep);
+#define update_mmu_cache(vma, addr, ptep) \
+	update_mmu_cache_range(NULL, vma, addr, ptep, 1)
 
-/* Encode swap {type,off} tuple into PTE
- * We reserve 13 bits for 5-bit @type, keeping bits 12-5 zero, ensuring that
- * PAGE_PRESENT is zero in a PTE holding swap "identifier"
+/*
+ * Encode/decode swap entries and swap PTEs. Swap PTEs are all PTEs that
+ * are !pte_none() && !pte_present().
+ *
+ * Format of swap PTEs:
+ *
+ *   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
+ *   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ *   <-------------- offset -------------> <--- zero --> E < type ->
+ *
+ *   E is the exclusive marker that is not stored in swap entries.
+ *   The zero'ed bits include _PAGE_PRESENT.
  */
 #define __swp_entry(type, off)		((swp_entry_t) \
 					{ ((type) & 0x1f) | ((off) << 13) })
@@ -138,12 +130,18 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long address,
 #define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) })
 #define __swp_entry_to_pte(x)		((pte_t) { (x).val })
 
-#define kern_addr_valid(addr)	(1)
+static inline bool pte_swp_exclusive(pte_t pte)
+{
+	return pte_val(pte) & _PAGE_SWP_EXCLUSIVE;
+}
+
+PTE_BIT_FUNC(swp_mkexclusive, |= (_PAGE_SWP_EXCLUSIVE));
+PTE_BIT_FUNC(swp_clear_exclusive, &= ~(_PAGE_SWP_EXCLUSIVE));
 
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
 #include <asm/hugepage.h>
 #endif
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif
diff --git a/arch/arc/include/asm/pgtable-levels.h b/arch/arc/include/asm/pgtable-levels.h
index 8084ef2f6491..c8f9273372c0 100644
--- a/arch/arc/include/asm/pgtable-levels.h
+++ b/arch/arc/include/asm/pgtable-levels.h
@@ -85,7 +85,7 @@
 
 #define PTRS_PER_PTE		BIT(PMD_SHIFT - PAGE_SHIFT)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #if CONFIG_PGTABLE_LEVELS > 3
 #include <asm-generic/pgtable-nop4d.h>
@@ -98,9 +98,6 @@
 /*
  * 1st level paging: pgd
  */
-#define pgd_index(addr)		((addr) >> PGDIR_SHIFT)
-#define pgd_offset(mm, addr)	(((mm)->pgd) + pgd_index(addr))
-#define pgd_offset_k(addr)	pgd_offset(&init_mm, addr)
 #define pgd_ERROR(e) \
 	pr_crit("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
 
@@ -145,7 +142,6 @@
 
 #define pmd_pfn(pmd)		((pmd_val(pmd) & PMD_MASK) >> PAGE_SHIFT)
 #define pfn_pmd(pfn,prot)	__pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
-#define mk_pmd(page,prot)	pfn_pmd(page_to_pfn(page),prot)
 
 #endif
 
@@ -161,9 +157,10 @@
 #define pmd_present(x)		(pmd_val(x))
 #define pmd_clear(xp)		do { pmd_val(*(xp)) = 0; } while (0)
 #define pmd_page_vaddr(pmd)	(pmd_val(pmd) & PAGE_MASK)
-#define pmd_page(pmd)		virt_to_page(pmd_page_vaddr(pmd))
+#define pmd_pfn(pmd)		((pmd_val(pmd) & PAGE_MASK) >> PAGE_SHIFT)
+#define pmd_page(pmd)		virt_to_page((void *)pmd_page_vaddr(pmd))
 #define set_pmd(pmdp, pmd)	(*(pmdp) = pmd)
-#define pmd_pgtable(pmd)	((pgtable_t) pmd_page_vaddr(pmd))
+#define pmd_pgtable(pmd)	((pgtable_t) pmd_page(pmd))
 
 /*
  * 4th level paging: pte
@@ -171,6 +168,7 @@
 #define pte_ERROR(e) \
 	pr_crit("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
 
+#define PFN_PTE_SHIFT		PAGE_SHIFT
 #define pte_none(x)		(!pte_val(x))
 #define pte_present(x)		(pte_val(x) & _PAGE_PRESENT)
 #define pte_clear(mm,addr,ptep)	set_pte_at(mm, addr, ptep, __pte(0))
@@ -178,12 +176,11 @@
 #define set_pte(ptep, pte)	((*(ptep)) = (pte))
 #define pte_pfn(pte)		(pte_val(pte) >> PAGE_SHIFT)
 #define pfn_pte(pfn, prot)	__pte(__pfn_to_phys(pfn) | pgprot_val(prot))
-#define mk_pte(page, prot)	pfn_pte(page_to_pfn(page), prot)
 
 #ifdef CONFIG_ISA_ARCV2
 #define pmd_leaf(x)		(pmd_val(x) & _PAGE_HW_SZ)
 #endif
 
-#endif	/* !__ASSEMBLY__ */
+#endif	/* !__ASSEMBLER__ */
 
 #endif
diff --git a/arch/arc/include/asm/pgtable.h b/arch/arc/include/asm/pgtable.h
index 4cf45a99fd79..bd580e2b62d7 100644
--- a/arch/arc/include/asm/pgtable.h
+++ b/arch/arc/include/asm/pgtable.h
@@ -19,7 +19,7 @@
  */
 #define	USER_PTRS_PER_PGD	(TASK_SIZE / PGDIR_SIZE)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 extern char empty_zero_page[PAGE_SIZE];
 #define ZERO_PAGE(vaddr)	(virt_to_page(empty_zero_page))
@@ -29,6 +29,6 @@ extern pgd_t swapper_pg_dir[] __aligned(PAGE_SIZE);
 /* to cope with aliasing VIPT cache */
 #define HAVE_ARCH_UNMAPPED_AREA
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif
diff --git a/arch/arc/include/asm/processor.h b/arch/arc/include/asm/processor.h
index f28afcf5c6d1..7f7901ac6643 100644
--- a/arch/arc/include/asm/processor.h
+++ b/arch/arc/include/asm/processor.h
@@ -11,7 +11,7 @@
 #ifndef __ASM_ARC_PROCESSOR_H
 #define __ASM_ARC_PROCESSOR_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <asm/ptrace.h>
 #include <asm/dsp.h>
@@ -22,7 +22,6 @@
  * struct thread_info
  */
 struct thread_struct {
-	unsigned long ksp;	/* kernel mode stack pointer */
 	unsigned long callee_reg;	/* pointer to callee regs */
 	unsigned long fault_address;	/* dbls as brkpt holder as well */
 #ifdef CONFIG_ARC_DSP_SAVE_RESTORE_REGS
@@ -33,9 +32,7 @@ struct thread_struct {
 #endif
 };
 
-#define INIT_THREAD  {                          \
-	.ksp = sizeof(init_stack) + (unsigned long) init_stack, \
-}
+#define INIT_THREAD  { }
 
 /* Forward declaration, a strange C thing */
 struct task_struct;
@@ -43,9 +40,6 @@ struct task_struct;
 #define task_pt_regs(p) \
 	((struct pt_regs *)(THREAD_SIZE + (void *)task_stack_page(p)) - 1)
 
-/* Free all resources held by a thread */
-#define release_thread(thread) do { } while (0)
-
 /*
  * A lot of busy-wait loops in SMP are based off of non-volatile data otherwise
  * get optimised away by gcc
@@ -59,7 +53,7 @@ struct task_struct;
  * Where about of Task's sp, fp, blink when it was last seen in kernel mode.
  * Look in process.c for details of kernel stack layout
  */
-#define TSK_K_ESP(tsk)		(tsk->thread.ksp)
+#define TSK_K_ESP(tsk)		(task_thread_info(tsk)->ksp)
 
 #define TSK_K_REG(tsk, off)	(*((unsigned long *)(TSK_K_ESP(tsk) + \
 					sizeof(struct callee_regs) + off)))
@@ -70,9 +64,9 @@ struct task_struct;
 extern void start_thread(struct pt_regs * regs, unsigned long pc,
 			 unsigned long usp);
 
-extern unsigned int get_wchan(struct task_struct *p);
+extern unsigned int __get_wchan(struct task_struct *p);
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 /*
  * Default System Memory Map on ARC
diff --git a/arch/arc/include/asm/ptrace.h b/arch/arc/include/asm/ptrace.h
index 4c3c9be5bd16..f6c052af8f4d 100644
--- a/arch/arc/include/asm/ptrace.h
+++ b/arch/arc/include/asm/ptrace.h
@@ -8,8 +8,20 @@
 #define __ASM_ARC_PTRACE_H
 
 #include <uapi/asm/ptrace.h>
+#include <linux/compiler.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
+
+typedef union {
+	struct {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+		unsigned long state:8, vec:8, cause:8, param:8;
+#else
+		unsigned long param:8, cause:8, vec:8, state:8;
+#endif
+	};
+	unsigned long full;
+} ecr_reg;
 
 /* THE pt_regs: Defines how regs are saved during entry into kernel */
 
@@ -39,49 +51,29 @@ struct pt_regs {
 	 * 	Last word used by Linux for extra state mgmt (syscall-restart)
 	 * For interrupts, use artificial ECR values to note current prio-level
 	 */
-	union {
-		struct {
-#ifdef CONFIG_CPU_BIG_ENDIAN
-			unsigned long state:8, ecr_vec:8,
-				      ecr_cause:8, ecr_param:8;
-#else
-			unsigned long ecr_param:8, ecr_cause:8,
-				      ecr_vec:8, state:8;
-#endif
-		};
-		unsigned long event;
-	};
+	ecr_reg ecr;
+};
 
-	unsigned long user_r25;
+struct callee_regs {
+	unsigned long r25, r24, r23, r22, r21, r20, r19, r18, r17, r16, r15, r14, r13;
 };
+
+#define MAX_REG_OFFSET offsetof(struct pt_regs, ecr)
+
 #else
 
 struct pt_regs {
 
 	unsigned long orig_r0;
 
-	union {
-		struct {
-#ifdef CONFIG_CPU_BIG_ENDIAN
-			unsigned long state:8, ecr_vec:8,
-				      ecr_cause:8, ecr_param:8;
-#else
-			unsigned long ecr_param:8, ecr_cause:8,
-				      ecr_vec:8, state:8;
-#endif
-		};
-		unsigned long event;
-	};
-
-	unsigned long bta;	/* bta_l1, bta_l2, erbta */
+	ecr_reg ecr;		/* Exception Cause Reg */
 
-	unsigned long user_r25;
+	unsigned long bta;	/* erbta */
 
-	unsigned long r26;	/* gp */
 	unsigned long fp;
-	unsigned long sp;	/* user/kernel sp depending on where we came from  */
-
-	unsigned long r12, r30;
+	unsigned long r30;
+	unsigned long r12;
+	unsigned long r26;	/* gp */
 
 #ifdef CONFIG_ARC_HAS_ACCL_REGS
 	unsigned long r58, r59;	/* ACCL/ACCH used by FPU / DSP MPY */
@@ -90,6 +82,8 @@ struct pt_regs {
 	unsigned long DSP_CTRL;
 #endif
 
+	unsigned long sp;	/* user/kernel sp depending on entry  */
+
 	/*------- Below list auto saved by h/w -----------*/
 	unsigned long r0, r1, r2, r3, r4, r5, r6, r7, r8, r9, r10, r11;
 
@@ -102,14 +96,14 @@ struct pt_regs {
 	unsigned long status32;
 };
 
-#endif
-
-/* Callee saved registers - need to be saved only when you are scheduled out */
-
 struct callee_regs {
 	unsigned long r25, r24, r23, r22, r21, r20, r19, r18, r17, r16, r15, r14, r13;
 };
 
+#define MAX_REG_OFFSET offsetof(struct pt_regs, status32)
+
+#endif
+
 #define instruction_pointer(regs)	((regs)->ret)
 #define profile_pc(regs)		instruction_pointer(regs)
 
@@ -128,13 +122,13 @@ struct callee_regs {
 /* return 1 if PC in delay slot */
 #define delay_mode(regs) ((regs->status32 & STATUS_DE_MASK) == STATUS_DE_MASK)
 
-#define in_syscall(regs)    ((regs->ecr_vec == ECR_V_TRAP) && !regs->ecr_param)
-#define in_brkpt_trap(regs) ((regs->ecr_vec == ECR_V_TRAP) && regs->ecr_param)
+#define in_syscall(regs)    ((regs->ecr.vec == ECR_V_TRAP) && !regs->ecr.param)
+#define in_brkpt_trap(regs) ((regs->ecr.vec == ECR_V_TRAP) && regs->ecr.param)
 
 #define STATE_SCALL_RESTARTED	0x01
 
-#define syscall_wont_restart(reg) (reg->state |= STATE_SCALL_RESTARTED)
-#define syscall_restartable(reg) !(reg->state &  STATE_SCALL_RESTARTED)
+#define syscall_wont_restart(regs) (regs->ecr.state |= STATE_SCALL_RESTARTED)
+#define syscall_restartable(regs) !(regs->ecr.state &  STATE_SCALL_RESTARTED)
 
 #define current_pt_regs()					\
 ({								\
@@ -149,6 +143,35 @@ static inline long regs_return_value(struct pt_regs *regs)
 	return (long)regs->r0;
 }
 
-#endif /* !__ASSEMBLY__ */
+static inline void instruction_pointer_set(struct pt_regs *regs,
+					   unsigned long val)
+{
+	instruction_pointer(regs) = val;
+}
+
+static inline unsigned long kernel_stack_pointer(struct pt_regs *regs)
+{
+	return regs->sp;
+}
+
+extern int regs_query_register_offset(const char *name);
+extern const char *regs_query_register_name(unsigned int offset);
+extern bool regs_within_kernel_stack(struct pt_regs *regs, unsigned long addr);
+extern unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs,
+					       unsigned int n);
+
+static inline unsigned long regs_get_register(struct pt_regs *regs,
+					      unsigned int offset)
+{
+	if (unlikely(offset > MAX_REG_OFFSET))
+		return 0;
+
+	return *(unsigned long *)((unsigned long)regs + offset);
+}
+
+extern int syscall_trace_enter(struct pt_regs *);
+extern void syscall_trace_exit(struct pt_regs *);
+
+#endif /* !__ASSEMBLER__ */
 
 #endif /* __ASM_PTRACE_H */
diff --git a/arch/arc/include/asm/segment.h b/arch/arc/include/asm/segment.h
deleted file mode 100644
index 871f8ab11bfd..000000000000
--- a/arch/arc/include/asm/segment.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
- */
-
-#ifndef __ASMARC_SEGMENT_H
-#define __ASMARC_SEGMENT_H
-
-#ifndef __ASSEMBLY__
-
-typedef unsigned long mm_segment_t;
-
-#define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
-
-#define KERNEL_DS		MAKE_MM_SEG(0)
-#define USER_DS			MAKE_MM_SEG(TASK_SIZE)
-#define uaccess_kernel()	(get_fs() == KERNEL_DS)
-
-#endif /* __ASSEMBLY__ */
-#endif /* __ASMARC_SEGMENT_H */
diff --git a/arch/arc/include/asm/setup.h b/arch/arc/include/asm/setup.h
index 028a8cf76206..1c6db599e1fc 100644
--- a/arch/arc/include/asm/setup.h
+++ b/arch/arc/include/asm/setup.h
@@ -35,11 +35,11 @@ long __init arc_get_mem_sz(void);
 #define IS_AVAIL3(v, v2, s)	IS_AVAIL1(v, s), IS_AVAIL1(v, IS_DISABLED_RUN(v2))
 
 extern void arc_mmu_init(void);
-extern char *arc_mmu_mumbojumbo(int cpu_id, char *buf, int len);
-extern void read_decode_mmu_bcr(void);
+extern int arc_mmu_mumbojumbo(int cpu_id, char *buf, int len);
 
 extern void arc_cache_init(void);
-extern char *arc_cache_mumbojumbo(int cpu_id, char *buf, int len);
-extern void read_decode_cache_bcr(void);
+extern int arc_cache_mumbojumbo(int cpu_id, char *buf, int len);
+
+extern void __init handle_uboot_args(void);
 
 #endif /* __ASMARC_SETUP_H */
diff --git a/arch/arc/include/asm/shmparam.h b/arch/arc/include/asm/shmparam.h
index 8b0251464ffd..719112af0f41 100644
--- a/arch/arc/include/asm/shmparam.h
+++ b/arch/arc/include/asm/shmparam.h
@@ -6,7 +6,7 @@
 #ifndef __ARC_ASM_SHMPARAM_H
 #define __ARC_ASM_SHMPARAM_H
 
-/* Handle upto 2 cache bins */
+/* Handle up to 2 cache bins */
 #define	SHMLBA	(2 * PAGE_SIZE)
 
 /* Enforce SHMLBA in shmat */
diff --git a/arch/arc/include/asm/smp.h b/arch/arc/include/asm/smp.h
index d856491606ac..990f834909f0 100644
--- a/arch/arc/include/asm/smp.h
+++ b/arch/arc/include/asm/smp.h
@@ -29,6 +29,8 @@ extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
 extern void __init smp_init_cpus(void);
 extern void first_lines_of_secondary(void);
 extern const char *arc_platform_smp_cpuinfo(void);
+extern void arc_platform_smp_wait_to_boot(int);
+extern void start_kernel_secondary(void);
 
 /*
  * API expected BY platform smp code (FROM arch smp code)
@@ -75,7 +77,7 @@ static inline const char *arc_platform_smp_cpuinfo(void)
 
 /*
  * ARC700 doesn't support atomic Read-Modify-Write ops.
- * Originally Interrupts had to be disabled around code to gaurantee atomicity.
+ * Originally Interrupts had to be disabled around code to guarantee atomicity.
  * The LLOCK/SCOND insns allow writing interrupt-hassle-free based atomic ops
  * based on retry-if-irq-in-atomic (with hardware assist).
  * However despite these, we provide the IRQ disabling variant
@@ -84,7 +86,7 @@ static inline const char *arc_platform_smp_cpuinfo(void)
  *	support needed.
  *
  * (2) In a SMP setup, the LLOCK/SCOND atomicity across CPUs needs to be
- *	gaurantted by the platform (not something which core handles).
+ *	guaranteed by the platform (not something which core handles).
  *	Assuming a platform won't, SMP Linux needs to use spinlocks + local IRQ
  *	disabling for atomicity.
  *
diff --git a/arch/arc/include/asm/switch_to.h b/arch/arc/include/asm/switch_to.h
index 1f85de8288b1..5806106a65f9 100644
--- a/arch/arc/include/asm/switch_to.h
+++ b/arch/arc/include/asm/switch_to.h
@@ -6,7 +6,7 @@
 #ifndef _ASM_ARC_SWITCH_TO_H
 #define _ASM_ARC_SWITCH_TO_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/sched.h>
 #include <asm/dsp-impl.h>
diff --git a/arch/arc/include/asm/syscall.h b/arch/arc/include/asm/syscall.h
index 94529e89dff0..728d625a10f1 100644
--- a/arch/arc/include/asm/syscall.h
+++ b/arch/arc/include/asm/syscall.h
@@ -12,6 +12,8 @@
 #include <asm/unistd.h>
 #include <asm/ptrace.h>		/* in_syscall() */
 
+extern void *sys_call_table[];
+
 static inline long
 syscall_get_nr(struct task_struct *task, struct pt_regs *regs)
 {
@@ -22,6 +24,17 @@ syscall_get_nr(struct task_struct *task, struct pt_regs *regs)
 }
 
 static inline void
+syscall_set_nr(struct task_struct *task, struct pt_regs *regs, int nr)
+{
+	/*
+	 * Unlike syscall_get_nr(), syscall_set_nr() can be called only when
+	 * the target task is stopped for tracing on entering syscall, so
+	 * there is no need to have the same check syscall_get_nr() has.
+	 */
+	regs->r8 = nr;
+}
+
+static inline void
 syscall_rollback(struct task_struct *task, struct pt_regs *regs)
 {
 	regs->r0 = regs->orig_r0;
@@ -65,6 +78,20 @@ syscall_get_arguments(struct task_struct *task, struct pt_regs *regs,
 	}
 }
 
+static inline void
+syscall_set_arguments(struct task_struct *task, struct pt_regs *regs,
+		      unsigned long *args)
+{
+	unsigned long *inside_ptregs = &regs->r0;
+	unsigned int n = 6;
+	unsigned int i = 0;
+
+	while (n--) {
+		*inside_ptregs = args[i++];
+		inside_ptregs--;
+	}
+}
+
 static inline int
 syscall_get_arch(struct task_struct *task)
 {
diff --git a/arch/arc/include/asm/thread_info.h b/arch/arc/include/asm/thread_info.h
index c0942c24d401..255d2c774219 100644
--- a/arch/arc/include/asm/thread_info.h
+++ b/arch/arc/include/asm/thread_info.h
@@ -24,10 +24,9 @@
 #define THREAD_SIZE     (PAGE_SIZE << THREAD_SIZE_ORDER)
 #define THREAD_SHIFT	(PAGE_SHIFT << THREAD_SIZE_ORDER)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/thread_info.h>
-#include <asm/segment.h>
 
 /*
  * low level task data that entry.S needs immediate access to
@@ -38,17 +37,16 @@
  */
 struct thread_info {
 	unsigned long flags;		/* low level flags */
-	int preempt_count;		/* 0 => preemptable, <0 => BUG */
-	struct task_struct *task;	/* main task structure */
-	mm_segment_t addr_limit;	/* thread address space */
-	__u32 cpu;			/* current CPU */
+	unsigned long ksp;		/* kernel mode stack top in __switch_to */
+	int preempt_count;		/* 0 => preemptible, <0 => BUG */
+	int cpu;			/* current CPU */
 	unsigned long thr_ptr;		/* TLS ptr */
+	struct task_struct *task;	/* main task structure */
 };
 
 /*
- * macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
+ * initilaize thread_info for any @tsk
+ *  - this is not related to init_task per se
  */
 #define INIT_THREAD_INFO(tsk)			\
 {						\
@@ -56,7 +54,6 @@ struct thread_info {
 	.flags      = 0,			\
 	.cpu        = 0,			\
 	.preempt_count  = INIT_PREEMPT_COUNT,	\
-	.addr_limit = KERNEL_DS,		\
 }
 
 static inline __attribute_const__ struct thread_info *current_thread_info(void)
@@ -65,7 +62,7 @@ static inline __attribute_const__ struct thread_info *current_thread_info(void)
 	return (struct thread_info *)(sp & ~(THREAD_SIZE - 1));
 }
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 /*
  * thread information flags
@@ -81,9 +78,9 @@ static inline __attribute_const__ struct thread_info *current_thread_info(void)
 #define TIF_SYSCALL_AUDIT	4	/* syscall auditing active */
 #define TIF_NOTIFY_SIGNAL	5	/* signal notifications exist */
 #define TIF_SYSCALL_TRACE	15	/* syscall trace active */
-
 /* true if poll_idle() is polling TIF_NEED_RESCHED */
 #define TIF_MEMDIE		16
+#define TIF_SYSCALL_TRACEPOINT	17	/* syscall tracepoint instrumentation */
 
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
 #define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
@@ -92,15 +89,18 @@ static inline __attribute_const__ struct thread_info *current_thread_info(void)
 #define _TIF_SYSCALL_AUDIT	(1<<TIF_SYSCALL_AUDIT)
 #define _TIF_NOTIFY_SIGNAL	(1<<TIF_NOTIFY_SIGNAL)
 #define _TIF_MEMDIE		(1<<TIF_MEMDIE)
+#define _TIF_SYSCALL_TRACEPOINT	(1<<TIF_SYSCALL_TRACEPOINT)
 
 /* work to do on interrupt/exception return */
 #define _TIF_WORK_MASK		(_TIF_NEED_RESCHED | _TIF_SIGPENDING | \
 				 _TIF_NOTIFY_RESUME | _TIF_NOTIFY_SIGNAL)
 
+#define _TIF_SYSCALL_WORK	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_TRACEPOINT)
+
 /*
  * _TIF_ALLWORK_MASK includes SYSCALL_TRACE, but we don't need it.
- * SYSCALL_TRACE is anyway seperately/unconditionally tested right after a
- * syscall, so all that reamins to be tested is _TIF_WORK_MASK
+ * SYSCALL_TRACE is anyway separately/unconditionally tested right after a
+ * syscall, so all that remains to be tested is _TIF_WORK_MASK
  */
 
 #endif /* _ASM_THREAD_INFO_H */
diff --git a/arch/arc/include/asm/uaccess.h b/arch/arc/include/asm/uaccess.h
index 783bfdb3bfa3..1e8809ea000a 100644
--- a/arch/arc/include/asm/uaccess.h
+++ b/arch/arc/include/asm/uaccess.h
@@ -23,35 +23,6 @@
 
 #include <linux/string.h>	/* for generic string functions */
 
-
-#define __kernel_ok		(uaccess_kernel())
-
-/*
- * Algorithmically, for __user_ok() we want do:
- * 	(start < TASK_SIZE) && (start+len < TASK_SIZE)
- * where TASK_SIZE could either be retrieved from thread_info->addr_limit or
- * emitted directly in code.
- *
- * This can however be rewritten as follows:
- *	(len <= TASK_SIZE) && (start+len < TASK_SIZE)
- *
- * Because it essentially checks if buffer end is within limit and @len is
- * non-ngeative, which implies that buffer start will be within limit too.
- *
- * The reason for rewriting being, for majority of cases, @len is generally
- * compile time constant, causing first sub-expression to be compile time
- * subsumed.
- *
- * The second part would generate weird large LIMMs e.g. (0x6000_0000 - 0x10),
- * so we check for TASK_SIZE using get_fs() since the addr_limit load from mem
- * would already have been done at this call site for __kernel_ok()
- *
- */
-#define __user_ok(addr, sz)	(((sz) <= TASK_SIZE) && \
-				 ((addr) <= (get_fs() - (sz))))
-#define __access_ok(addr, sz)	(unlikely(__kernel_ok) || \
-				 likely(__user_ok((addr), (sz))))
-
 /*********** Single byte/hword/word copies ******************/
 
 #define __get_user_fn(sz, u, k)					\
@@ -175,8 +146,9 @@ raw_copy_from_user(void *to, const void __user *from, unsigned long n)
 	if (n == 0)
 		return 0;
 
-	/* unaligned */
-	if (((unsigned long)to & 0x3) || ((unsigned long)from & 0x3)) {
+	/* fallback for unaligned access when hardware doesn't support */
+	if (!IS_ENABLED(CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS) &&
+	     (((unsigned long)to & 0x3) || ((unsigned long)from & 0x3))) {
 
 		unsigned char tmp;
 
@@ -402,8 +374,9 @@ raw_copy_to_user(void __user *to, const void *from, unsigned long n)
 	if (n == 0)
 		return 0;
 
-	/* unaligned */
-	if (((unsigned long)to & 0x3) || ((unsigned long)from & 0x3)) {
+	/* fallback for unaligned access when hardware doesn't support */
+	if (!IS_ENABLED(CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS) &&
+	     (((unsigned long)to & 0x3) || ((unsigned long)from & 0x3))) {
 
 		unsigned char tmp;
 
@@ -613,7 +586,7 @@ raw_copy_to_user(void __user *to, const void *from, unsigned long n)
 	return res;
 }
 
-static inline unsigned long __arc_clear_user(void __user *to, unsigned long n)
+static inline unsigned long __clear_user(void __user *to, unsigned long n)
 {
 	long res = n;
 	unsigned char *d_char = to;
@@ -655,19 +628,11 @@ static inline unsigned long __arc_clear_user(void __user *to, unsigned long n)
 	return res;
 }
 
-#ifndef CONFIG_CC_OPTIMIZE_FOR_SIZE
-
 #define INLINE_COPY_TO_USER
 #define INLINE_COPY_FROM_USER
 
-#define __clear_user(d, n)		__arc_clear_user(d, n)
-#else
-extern unsigned long arc_clear_user_noinline(void __user *to,
-		unsigned long n);
-#define __clear_user(d, n)		arc_clear_user_noinline(d, n)
-#endif
+#define __clear_user			__clear_user
 
-#include <asm/segment.h>
 #include <asm-generic/uaccess.h>
 
 #endif
diff --git a/arch/arc/include/asm/unaligned.h b/arch/arc/include/asm/unaligned.h
deleted file mode 100644
index cf5a02382e0e..000000000000
--- a/arch/arc/include/asm/unaligned.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
- */
-
-#ifndef _ASM_ARC_UNALIGNED_H
-#define _ASM_ARC_UNALIGNED_H
-
-/* ARC700 can't handle unaligned Data accesses. */
-
-#include <asm-generic/unaligned.h>
-#include <asm/ptrace.h>
-
-#ifdef CONFIG_ARC_EMUL_UNALIGNED
-int misaligned_fixup(unsigned long address, struct pt_regs *regs,
-		     struct callee_regs *cregs);
-#else
-static inline int
-misaligned_fixup(unsigned long address, struct pt_regs *regs,
-		 struct callee_regs *cregs)
-{
-	/* Not fixed */
-	return 1;
-}
-#endif
-
-#endif /* _ASM_ARC_UNALIGNED_H */
diff --git a/arch/arc/include/asm/unistd.h b/arch/arc/include/asm/unistd.h
new file mode 100644
index 000000000000..211c230d88d6
--- /dev/null
+++ b/arch/arc/include/asm/unistd.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _ASM_ARC_UNISTD_H
+#define _ASM_ARC_UNISTD_H
+
+#include <uapi/asm/unistd.h>
+
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_CLONE
+#define __ARCH_WANT_SYS_VFORK
+#define __ARCH_WANT_SYS_FORK
+
+#define NR_syscalls __NR_syscalls
+
+#endif
diff --git a/arch/arc/include/uapi/asm/Kbuild b/arch/arc/include/uapi/asm/Kbuild
index e78470141932..2501e82a1a0a 100644
--- a/arch/arc/include/uapi/asm/Kbuild
+++ b/arch/arc/include/uapi/asm/Kbuild
@@ -1,2 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0
+syscall-y += unistd_32.h
+
 generic-y += ucontext.h
diff --git a/arch/arc/include/uapi/asm/bpf_perf_event.h b/arch/arc/include/uapi/asm/bpf_perf_event.h
new file mode 100644
index 000000000000..6cb1c2823288
--- /dev/null
+++ b/arch/arc/include/uapi/asm/bpf_perf_event.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI__ASM_BPF_PERF_EVENT_H__
+#define _UAPI__ASM_BPF_PERF_EVENT_H__
+
+#include <asm/ptrace.h>
+
+typedef struct user_regs_struct bpf_user_pt_regs_t;
+
+#endif /* _UAPI__ASM_BPF_PERF_EVENT_H__ */
diff --git a/arch/arc/include/uapi/asm/page.h b/arch/arc/include/uapi/asm/page.h
index 2a4ad619abfb..4606a326af5c 100644
--- a/arch/arc/include/uapi/asm/page.h
+++ b/arch/arc/include/uapi/asm/page.h
@@ -13,10 +13,8 @@
 #include <linux/const.h>
 
 /* PAGE_SHIFT determines the page size */
-#if defined(CONFIG_ARC_PAGE_SIZE_16K)
-#define PAGE_SHIFT 14
-#elif defined(CONFIG_ARC_PAGE_SIZE_4K)
-#define PAGE_SHIFT 12
+#ifdef __KERNEL__
+#include <vdso/page.h>
 #else
 /*
  * Default 8k
@@ -26,11 +24,10 @@
  * not available
  */
 #define PAGE_SHIFT 13
+#define PAGE_SIZE	_BITUL(PAGE_SHIFT)	/* Default 8K */
+#define PAGE_MASK	(~(PAGE_SIZE-1))
 #endif
 
-#define PAGE_SIZE	_BITUL(PAGE_SHIFT)	/* Default 8K */
 #define PAGE_OFFSET	_AC(0x80000000, UL)	/* Kernel starts at 2G onwrds */
 
-#define PAGE_MASK	(~(PAGE_SIZE-1))
-
 #endif /* _UAPI__ASM_ARC_PAGE_H */
diff --git a/arch/arc/include/uapi/asm/ptrace.h b/arch/arc/include/uapi/asm/ptrace.h
index 2a6eff57f6dd..3ae832db278c 100644
--- a/arch/arc/include/uapi/asm/ptrace.h
+++ b/arch/arc/include/uapi/asm/ptrace.h
@@ -14,7 +14,7 @@
 
 #define PTRACE_GET_THREAD_AREA	25
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 /*
  * Userspace ABI: Register state needed by
  *  -ptrace (gdbserver)
@@ -53,6 +53,6 @@ struct user_regs_arcv2 {
 	unsigned long r30, r58, r59;
 };
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* _UAPI__ASM_ARC_PTRACE_H */
diff --git a/arch/arc/include/uapi/asm/swab.h b/arch/arc/include/uapi/asm/swab.h
index 02109cd48ee1..8d1f1ef44ba7 100644
--- a/arch/arc/include/uapi/asm/swab.h
+++ b/arch/arc/include/uapi/asm/swab.h
@@ -62,7 +62,7 @@
  * 8051fdc4:	st     r2,[r1,20]	; Mem op : save result back to mem
  *
  * Joern suggested a better "C" algorithm which is great since
- * (1) It is portable to any architecure
+ * (1) It is portable to any architecture
  * (2) At the same time it takes advantage of ARC ISA (rotate intrns)
  */
 
diff --git a/arch/arc/include/uapi/asm/unistd.h b/arch/arc/include/uapi/asm/unistd.h
index fa2713ae6bea..cb2905c7c5da 100644
--- a/arch/arc/include/uapi/asm/unistd.h
+++ b/arch/arc/include/uapi/asm/unistd.h
@@ -7,46 +7,4 @@
  * published by the Free Software Foundation.
  */
 
-/******** no-legacy-syscalls-ABI *******/
-
-/*
- * Non-typical guard macro to enable inclusion twice in ARCH sys.c
- * That is how the Generic syscall wrapper generator works
- */
-#if !defined(_UAPI_ASM_ARC_UNISTD_H) || defined(__SYSCALL)
-#define _UAPI_ASM_ARC_UNISTD_H
-
-#define __ARCH_WANT_RENAMEAT
-#define __ARCH_WANT_STAT64
-#define __ARCH_WANT_SET_GET_RLIMIT
-#define __ARCH_WANT_SYS_EXECVE
-#define __ARCH_WANT_SYS_CLONE
-#define __ARCH_WANT_SYS_CLONE3
-#define __ARCH_WANT_SYS_VFORK
-#define __ARCH_WANT_SYS_FORK
-#define __ARCH_WANT_TIME32_SYSCALLS
-
-#define sys_mmap2 sys_mmap_pgoff
-
-#include <asm-generic/unistd.h>
-
-#define NR_syscalls	__NR_syscalls
-
-/* Generic syscall (fs/filesystems.c - lost in asm-generic/unistd.h */
-#define __NR_sysfs		(__NR_arch_specific_syscall + 3)
-
-/* ARC specific syscall */
-#define __NR_cacheflush		(__NR_arch_specific_syscall + 0)
-#define __NR_arc_settls		(__NR_arch_specific_syscall + 1)
-#define __NR_arc_gettls		(__NR_arch_specific_syscall + 2)
-#define __NR_arc_usr_cmpxchg	(__NR_arch_specific_syscall + 4)
-
-__SYSCALL(__NR_cacheflush, sys_cacheflush)
-__SYSCALL(__NR_arc_settls, sys_arc_settls)
-__SYSCALL(__NR_arc_gettls, sys_arc_gettls)
-__SYSCALL(__NR_arc_usr_cmpxchg, sys_arc_usr_cmpxchg)
-__SYSCALL(__NR_sysfs, sys_sysfs)
-
-#undef __SYSCALL
-
-#endif
+#include <asm/unistd_32.h>
diff --git a/arch/arc/kernel/Makefile b/arch/arc/kernel/Makefile
index 8c4fc4b54c14..fa94fff02419 100644
--- a/arch/arc/kernel/Makefile
+++ b/arch/arc/kernel/Makefile
@@ -3,8 +3,10 @@
 # Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
 #
 
-obj-y	:= arcksyms.o setup.o irq.o reset.o ptrace.o process.o devtree.o
+obj-y	:= head.o arcksyms.o setup.o irq.o reset.o ptrace.o process.o devtree.o
 obj-y	+= signal.o traps.o sys.o troubleshoot.o stacktrace.o disasm.o
+obj-y	+= ctx_sw_asm.o
+
 obj-$(CONFIG_ISA_ARCOMPACT)		+= entry-compact.o intc-compact.o
 obj-$(CONFIG_ISA_ARCV2)			+= entry-arcv2.o intc-arcv2.o
 
@@ -24,11 +26,4 @@ ifdef CONFIG_ISA_ARCOMPACT
 CFLAGS_fpu.o   += -mdpfp
 endif
 
-ifdef CONFIG_ARC_DW2_UNWIND
-CFLAGS_ctx_sw.o += -fno-omit-frame-pointer
-obj-y += ctx_sw.o
-else
-obj-y += ctx_sw_asm.o
-endif
-
-extra-y := vmlinux.lds head.o
+always-$(KBUILD_BUILTIN) := vmlinux.lds
diff --git a/arch/arc/kernel/Makefile.syscalls b/arch/arc/kernel/Makefile.syscalls
new file mode 100644
index 000000000000..391d30ab7a83
--- /dev/null
+++ b/arch/arc/kernel/Makefile.syscalls
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+
+syscall_abis_32 += arc time32 renameat stat64 rlimit
diff --git a/arch/arc/kernel/asm-offsets.c b/arch/arc/kernel/asm-offsets.c
index 0e884036ab74..2978da85fcb6 100644
--- a/arch/arc/kernel/asm-offsets.c
+++ b/arch/arc/kernel/asm-offsets.c
@@ -2,6 +2,7 @@
 /*
  * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
  */
+#define COMPILE_OFFSETS
 
 #include <linux/sched.h>
 #include <linux/mm.h>
@@ -20,13 +21,13 @@ int main(void)
 
 	BLANK();
 
-	DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp));
 	DEFINE(THREAD_CALLEE_REG, offsetof(struct thread_struct, callee_reg));
 	DEFINE(THREAD_FAULT_ADDR,
 	       offsetof(struct thread_struct, fault_address));
 
 	BLANK();
 
+	DEFINE(THREAD_INFO_KSP, offsetof(struct thread_info, ksp));
 	DEFINE(THREAD_INFO_FLAGS, offsetof(struct thread_info, flags));
 	DEFINE(THREAD_INFO_PREEMPT_COUNT,
 	       offsetof(struct thread_info, preempt_count));
@@ -46,7 +47,8 @@ int main(void)
 	BLANK();
 
 	DEFINE(PT_status32, offsetof(struct pt_regs, status32));
-	DEFINE(PT_event, offsetof(struct pt_regs, event));
+	DEFINE(PT_event, offsetof(struct pt_regs, ecr));
+	DEFINE(PT_bta, offsetof(struct pt_regs, bta));
 	DEFINE(PT_sp, offsetof(struct pt_regs, sp));
 	DEFINE(PT_r0, offsetof(struct pt_regs, r0));
 	DEFINE(PT_r1, offsetof(struct pt_regs, r1));
@@ -61,13 +63,9 @@ int main(void)
 	DEFINE(PT_r26, offsetof(struct pt_regs, r26));
 	DEFINE(PT_ret, offsetof(struct pt_regs, ret));
 	DEFINE(PT_blink, offsetof(struct pt_regs, blink));
+	OFFSET(PT_fp, pt_regs, fp);
 	DEFINE(PT_lpe, offsetof(struct pt_regs, lp_end));
 	DEFINE(PT_lpc, offsetof(struct pt_regs, lp_count));
-	DEFINE(PT_user_r25, offsetof(struct pt_regs, user_r25));
-
-	DEFINE(SZ_CALLEE_REGS, sizeof(struct callee_regs));
-	DEFINE(SZ_PT_REGS, sizeof(struct pt_regs));
-
 #ifdef CONFIG_ISA_ARCV2
 	OFFSET(PT_r12, pt_regs, r12);
 	OFFSET(PT_r30, pt_regs, r30);
@@ -80,5 +78,8 @@ int main(void)
 	OFFSET(PT_DSP_CTRL, pt_regs, DSP_CTRL);
 #endif
 
+	DEFINE(SZ_CALLEE_REGS, sizeof(struct callee_regs));
+	DEFINE(SZ_PT_REGS, sizeof(struct pt_regs));
+
 	return 0;
 }
diff --git a/arch/arc/kernel/ctx_sw.c b/arch/arc/kernel/ctx_sw.c
deleted file mode 100644
index 1a76f2d6f694..000000000000
--- a/arch/arc/kernel/ctx_sw.c
+++ /dev/null
@@ -1,112 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
- *
- * Vineetg: Aug 2009
- *  -"C" version of lowest level context switch asm macro called by schedular
- *   gcc doesn't generate the dward CFI info for hand written asm, hence can't
- *   backtrace out of it (e.g. tasks sleeping in kernel).
- *   So we cheat a bit by writing almost similar code in inline-asm.
- *  -This is a hacky way of doing things, but there is no other simple way.
- *   I don't want/intend to extend unwinding code to understand raw asm
- */
-
-#include <asm/asm-offsets.h>
-#include <linux/sched.h>
-#include <linux/sched/debug.h>
-
-#define KSP_WORD_OFF 	((TASK_THREAD + THREAD_KSP) / 4)
-
-struct task_struct *__sched
-__switch_to(struct task_struct *prev_task, struct task_struct *next_task)
-{
-	unsigned int tmp;
-	unsigned int prev = (unsigned int)prev_task;
-	unsigned int next = (unsigned int)next_task;
-
-	__asm__ __volatile__(
-		/* FP/BLINK save generated by gcc (standard function prologue */
-		"st.a    r13, [sp, -4]   \n\t"
-		"st.a    r14, [sp, -4]   \n\t"
-		"st.a    r15, [sp, -4]   \n\t"
-		"st.a    r16, [sp, -4]   \n\t"
-		"st.a    r17, [sp, -4]   \n\t"
-		"st.a    r18, [sp, -4]   \n\t"
-		"st.a    r19, [sp, -4]   \n\t"
-		"st.a    r20, [sp, -4]   \n\t"
-		"st.a    r21, [sp, -4]   \n\t"
-		"st.a    r22, [sp, -4]   \n\t"
-		"st.a    r23, [sp, -4]   \n\t"
-		"st.a    r24, [sp, -4]   \n\t"
-#ifndef CONFIG_ARC_CURR_IN_REG
-		"st.a    r25, [sp, -4]   \n\t"
-#else
-		"sub     sp, sp, 4      \n\t"	/* usual r25 placeholder */
-#endif
-
-		/* set ksp of outgoing task in tsk->thread.ksp */
-#if KSP_WORD_OFF <= 255
-		"st.as   sp, [%3, %1]    \n\t"
-#else
-		/*
-		 * Workaround for NR_CPUS=4k
-		 * %1 is bigger than 255 (S9 offset for st.as)
-		 */
-		"add2    r24, %3, %1     \n\t"
-		"st      sp, [r24]       \n\t"
-#endif
-
-		/*
-		 * setup _current_task with incoming tsk.
-		 * optionally, set r25 to that as well
-		 * For SMP extra work to get to &_current_task[cpu]
-		 * (open coded SET_CURR_TASK_ON_CPU)
-		 */
-#ifndef CONFIG_SMP
-		"st  %2, [@_current_task]	\n\t"
-#else
-		"lr   r24, [identity]		\n\t"
-		"lsr  r24, r24, 8		\n\t"
-		"bmsk r24, r24, 7		\n\t"
-		"add2 r24, @_current_task, r24	\n\t"
-		"st   %2,  [r24]		\n\t"
-#endif
-#ifdef CONFIG_ARC_CURR_IN_REG
-		"mov r25, %2   \n\t"
-#endif
-
-		/* get ksp of incoming task from tsk->thread.ksp */
-		"ld.as  sp, [%2, %1]   \n\t"
-
-		/* start loading it's CALLEE reg file */
-
-#ifndef CONFIG_ARC_CURR_IN_REG
-		"ld.ab   r25, [sp, 4]   \n\t"
-#else
-		"add    sp, sp, 4       \n\t"
-#endif
-		"ld.ab   r24, [sp, 4]   \n\t"
-		"ld.ab   r23, [sp, 4]   \n\t"
-		"ld.ab   r22, [sp, 4]   \n\t"
-		"ld.ab   r21, [sp, 4]   \n\t"
-		"ld.ab   r20, [sp, 4]   \n\t"
-		"ld.ab   r19, [sp, 4]   \n\t"
-		"ld.ab   r18, [sp, 4]   \n\t"
-		"ld.ab   r17, [sp, 4]   \n\t"
-		"ld.ab   r16, [sp, 4]   \n\t"
-		"ld.ab   r15, [sp, 4]   \n\t"
-		"ld.ab   r14, [sp, 4]   \n\t"
-		"ld.ab   r13, [sp, 4]   \n\t"
-
-		/* last (ret value) = prev : although for ARC it mov r0, r0 */
-		"mov     %0, %3        \n\t"
-
-		/* FP/BLINK restore generated by gcc (standard func epilogue */
-
-		: "=r"(tmp)
-		: "n"(KSP_WORD_OFF), "r"(next), "r"(prev)
-		: "blink"
-	);
-
-	return (struct task_struct *)tmp;
-}
diff --git a/arch/arc/kernel/ctx_sw_asm.S b/arch/arc/kernel/ctx_sw_asm.S
index 02c461484761..48e1f21976ed 100644
--- a/arch/arc/kernel/ctx_sw_asm.S
+++ b/arch/arc/kernel/ctx_sw_asm.S
@@ -11,50 +11,54 @@
 #include <asm/entry.h>       /* For the SAVE_* macros */
 #include <asm/asm-offsets.h>
 
-#define KSP_WORD_OFF 	((TASK_THREAD + THREAD_KSP) / 4)
-
-;################### Low Level Context Switch ##########################
+; IN
+;  - r0: prev task (also current)
+;  - r1: next task
+; OUT
+;  - r0: prev task (so r0 not touched)
 
 	.section .sched.text,"ax",@progbits
-	.align 4
-	.global __switch_to
-	.type   __switch_to, @function
-__switch_to:
-	CFI_STARTPROC
-
-	/* Save regs on kernel mode stack of task */
-	st.a    blink, [sp, -4]
-	st.a    fp, [sp, -4]
-	SAVE_CALLEE_SAVED_KERNEL
+ENTRY_CFI(__switch_to)
 
-	/* Save the now KSP in task->thread.ksp */
-#if KSP_WORD_OFF  <= 255
-	st.as  sp, [r0, KSP_WORD_OFF]
-#else
-	/* Workaround for NR_CPUS=4k as ST.as can only take s9 offset */
-	add2	r24, r0, KSP_WORD_OFF
-	st	sp, [r24]
-#endif
-	/*
-	* Return last task in r0 (return reg)
-	* On ARC, Return reg = First Arg reg = r0.
-	* Since we already have last task in r0,
-	* don't need to do anything special to return it
-	*/
+	/* save kernel stack frame regs of @prev task */
+	push	blink
+	CFI_DEF_CFA_OFFSET 4
+	CFI_OFFSET r31, -4
+
+	push	fp
+	CFI_DEF_CFA_OFFSET 8
+	CFI_OFFSET r27, -8
+
+	mov	fp, sp
+	CFI_DEF_CFA_REGISTER r27
+
+	/* kernel mode callee regs of @prev */
+	SAVE_CALLEE_SAVED_KERNEL
 
 	/*
-	 * switch to new task, contained in r1
-	 * Temp reg r3 is required to get the ptr to store val
+	 * save final SP to @prev->thread_info.ksp
+	 * @prev is "current" so thread_info derived from SP
 	 */
-	SET_CURR_TASK_ON_CPU  r1, r3
+	GET_CURR_THR_INFO_FROM_SP  r10
+	st	sp,  [r10, THREAD_INFO_KSP]
+
+	/* update @next in _current_task[] and GP register caching it */
+	SET_CURR_TASK_ON_CPU  r1, r10
 
-	/* reload SP with kernel mode stack pointer in task->thread.ksp */
-	ld.as  sp, [r1, (TASK_THREAD + THREAD_KSP)/4]
+	/* load SP from @next->thread_info.ksp */
+	ld	r10, [r1, TASK_THREAD_INFO]
+	ld	sp,  [r10, THREAD_INFO_KSP]
 
-	/* restore the registers */
+	/* restore callee regs, stack frame regs of @next */
 	RESTORE_CALLEE_SAVED_KERNEL
-	ld.ab   fp, [sp, 4]
-	ld.ab   blink, [sp, 4]
-	j       [blink]
 
+	pop	fp
+	CFI_RESTORE r27
+	CFI_DEF_CFA r28, 4
+
+	pop	blink
+	CFI_RESTORE r31
+	CFI_DEF_CFA_OFFSET 0
+
+	j      [blink]
 END_CFI(__switch_to)
diff --git a/arch/arc/kernel/devtree.c b/arch/arc/kernel/devtree.c
index 721d465f1580..cc6ac7d128aa 100644
--- a/arch/arc/kernel/devtree.c
+++ b/arch/arc/kernel/devtree.c
@@ -12,6 +12,7 @@
 #include <linux/of.h>
 #include <linux/of_fdt.h>
 #include <asm/mach_desc.h>
+#include <asm/serial.h>
 
 #ifdef CONFIG_SERIAL_EARLYCON
 
@@ -61,7 +62,7 @@ const struct machine_desc * __init setup_machine_fdt(void *dt)
 	const struct machine_desc *mdesc;
 	unsigned long dt_root;
 
-	if (!early_init_dt_scan(dt))
+	if (!early_init_dt_scan(dt, __pa(dt)))
 		return NULL;
 
 	mdesc = of_flat_dt_match_machine(NULL, arch_get_next_mach);
diff --git a/arch/arc/kernel/disasm.c b/arch/arc/kernel/disasm.c
index 03f8b1be0c3a..ccc7e8c39eb3 100644
--- a/arch/arc/kernel/disasm.c
+++ b/arch/arc/kernel/disasm.c
@@ -366,7 +366,7 @@ void __kprobes disasm_instr(unsigned long addr, struct disasm_state *state,
 	case op_SP:	/* LD_S|LDB_S b,[sp,u7], ST_S|STB_S b,[sp,u7] */
 		/* note: we are ignoring possibility of:
 		 * ADD_S, SUB_S, PUSH_S, POP_S as these should not
-		 * cause unaliged exception anyway */
+		 * cause unaligned exception anyway */
 		state->write = BITS(state->words[0], 6, 6);
 		state->zz = BITS(state->words[0], 5, 5);
 		if (state->zz)
@@ -434,14 +434,31 @@ long __kprobes get_reg(int reg, struct pt_regs *regs,
 {
 	long *p;
 
+#if defined(CONFIG_ISA_ARCOMPACT)
 	if (reg <= 12) {
 		p = &regs->r0;
 		return p[-reg];
 	}
+#else /* CONFIG_ISA_ARCV2 */
+	if (reg <= 11) {
+		p = &regs->r0;
+		return p[reg];
+	}
 
+	if (reg == 12)
+		return regs->r12;
+	if (reg == 30)
+		return regs->r30;
+#ifdef CONFIG_ARC_HAS_ACCL_REGS
+	if (reg == 58)
+		return regs->r58;
+	if (reg == 59)
+		return regs->r59;
+#endif
+#endif
 	if (cregs && (reg <= 25)) {
 		p = &cregs->r13;
-		return p[13-reg];
+		return p[13 - reg];
 	}
 
 	if (reg == 26)
@@ -461,6 +478,7 @@ void __kprobes set_reg(int reg, long val, struct pt_regs *regs,
 {
 	long *p;
 
+#if defined(CONFIG_ISA_ARCOMPACT)
 	switch (reg) {
 	case 0 ... 12:
 		p = &regs->r0;
@@ -469,7 +487,7 @@ void __kprobes set_reg(int reg, long val, struct pt_regs *regs,
 	case 13 ... 25:
 		if (cregs) {
 			p = &cregs->r13;
-			p[13-reg] = val;
+			p[13 - reg] = val;
 		}
 		break;
 	case 26:
@@ -487,6 +505,48 @@ void __kprobes set_reg(int reg, long val, struct pt_regs *regs,
 	default:
 		break;
 	}
+#else /* CONFIG_ISA_ARCV2 */
+	switch (reg) {
+	case 0 ... 11:
+		p = &regs->r0;
+		p[reg] = val;
+		break;
+	case 12:
+		regs->r12 = val;
+		break;
+	case 13 ... 25:
+		if (cregs) {
+			p = &cregs->r13;
+			p[13 - reg] = val;
+		}
+		break;
+	case 26:
+		regs->r26 = val;
+		break;
+	case 27:
+		regs->fp = val;
+		break;
+	case 28:
+		regs->sp = val;
+		break;
+	case 30:
+		regs->r30 = val;
+		break;
+	case 31:
+		regs->blink = val;
+		break;
+#ifdef CONFIG_ARC_HAS_ACCL_REGS
+	case 58:
+		regs->r58 = val;
+		break;
+	case 59:
+		regs->r59 = val;
+		break;
+#endif
+	default:
+		break;
+	}
+#endif
 }
 
 /*
@@ -503,7 +563,6 @@ int __kprobes disasm_next_pc(unsigned long pc, struct pt_regs *regs,
 {
 	struct disasm_state instr;
 
-	memset(&instr, 0, sizeof(struct disasm_state));
 	disasm_instr(pc, &instr, 0, regs, cregs);
 
 	*next_pc = pc + instr.instr_len;
diff --git a/arch/arc/kernel/entry-arcv2.S b/arch/arc/kernel/entry-arcv2.S
index a7e6a2174187..e238b5fd3c8c 100644
--- a/arch/arc/kernel/entry-arcv2.S
+++ b/arch/arc/kernel/entry-arcv2.S
@@ -5,7 +5,7 @@
  * Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com)
  */
 
-#include <linux/linkage.h>   /* ARC_{EXTRY,EXIT} */
+#include <linux/linkage.h>   /* ARC_{ENTRY,EXIT} */
 #include <asm/entry.h>       /* SAVE_ALL_{INT1,INT2,TRAP...} */
 #include <asm/errno.h>
 #include <asm/arcregs.h>
@@ -31,7 +31,7 @@ VECTOR	res_service		; Reset Vector
 VECTOR	mem_service		; Mem exception
 VECTOR	instr_service		; Instrn Error
 VECTOR	EV_MachineCheck		; Fatal Machine check
-VECTOR	EV_TLBMissI		; Intruction TLB miss
+VECTOR	EV_TLBMissI		; Instruction TLB miss
 VECTOR	EV_TLBMissD		; Data TLB miss
 VECTOR	EV_TLBProtV		; Protection Violation
 VECTOR	EV_PrivilegeV		; Privilege Violation
@@ -76,11 +76,11 @@ ENTRY(handle_interrupt)
 	# query in hard ISR path would return false (since .IE is set) which would
 	# trips genirq interrupt handling asserts.
 	#
-	# So do a "soft" disable of interrutps here.
+	# So do a "soft" disable of interrupts here.
 	#
 	# Note this disable is only for consistent book-keeping as further interrupts
 	# will be disabled anyways even w/o this. Hardware tracks active interrupts
-	# seperately in AUX_IRQ_ACT.active and will not take new interrupts
+	# separately in AUX_IRQ_ACT.active and will not take new interrupts
 	# unless this one returns (or higher prio becomes pending in 2-prio scheme)
 
 	IRQ_DISABLE
@@ -125,11 +125,6 @@ ENTRY(mem_service)
 
 	EXCEPTION_PROLOGUE
 
-	lr  r0, [efa]
-	mov r1, sp
-
-	FAKE_RET_FROM_EXCPN
-
 	bl  do_memory_error
 	b   ret_from_exception
 END(mem_service)
@@ -138,11 +133,6 @@ ENTRY(EV_Misaligned)
 
 	EXCEPTION_PROLOGUE
 
-	lr  r0, [efa]	; Faulting Data address
-	mov r1, sp
-
-	FAKE_RET_FROM_EXCPN
-
 	SAVE_CALLEE_SAVED_USER
 	mov r2, sp              ; callee_regs
 
@@ -163,11 +153,6 @@ ENTRY(EV_TLBProtV)
 
 	EXCEPTION_PROLOGUE
 
-	lr  r0, [efa]	; Faulting Data address
-	mov r1, sp	; pt_regs
-
-	FAKE_RET_FROM_EXCPN
-
 	mov blink, ret_from_exception
 	b   do_page_fault
 
diff --git a/arch/arc/kernel/entry-compact.S b/arch/arc/kernel/entry-compact.S
index 5cb0cd7e4eab..774c03cc1d1a 100644
--- a/arch/arc/kernel/entry-compact.S
+++ b/arch/arc/kernel/entry-compact.S
@@ -254,18 +254,7 @@ END(handle_interrupt_level1)
 
 ENTRY(EV_TLBProtV)
 
-	EXCEPTION_PROLOGUE
-
-	mov r2, r10	; ECR set into r10 already
-	lr  r0, [efa]	; Faulting Data address (not part of pt_regs saved above)
-
-	; Exception auto-disables further Intr/exceptions.
-	; Re-enable them by pretending to return from exception
-	; (so rest of handler executes in pure K mode)
-
-	FAKE_RET_FROM_EXCPN
-
-	mov   r1, sp	; Handle to pt_regs
+	EXCEPTION_PROLOGUE	; ECR returned in r10
 
 	;------ (5) Type of Protection Violation? ----------
 	;
@@ -273,8 +262,7 @@ ENTRY(EV_TLBProtV)
 	;   -Access Violation	: 00_23_(00|01|02|03)_00
 	;			         x  r  w  r+w
 	;   -Unaligned Access	: 00_23_04_00
-	;
-	bbit1 r2, ECR_C_BIT_PROTV_MISALIG_DATA, 4f
+	bbit1 r10, ECR_C_BIT_PROTV_MISALIG_DATA, 4f
 
 	;========= (6a) Access Violation Processing ========
 	bl  do_page_fault
@@ -303,9 +291,6 @@ END(EV_TLBProtV)
 ENTRY(call_do_page_fault)
 
 	EXCEPTION_PROLOGUE
-	lr  r0, [efa]	; Faulting Data address
-	mov   r1, sp
-	FAKE_RET_FROM_EXCPN
 
 	mov blink, ret_from_exception
 	b  do_page_fault
diff --git a/arch/arc/kernel/entry.S b/arch/arc/kernel/entry.S
index dd77a0c8f740..3c7e74aba679 100644
--- a/arch/arc/kernel/entry.S
+++ b/arch/arc/kernel/entry.S
@@ -29,8 +29,8 @@ ENTRY(sys_clone_wrapper)
 	DISCARD_CALLEE_SAVED_USER
 
 	GET_CURR_THR_INFO_FLAGS   r10
-	btst r10, TIF_SYSCALL_TRACE
-	bnz  tracesys_exit
+	and.f 0, r10, _TIF_SYSCALL_WORK
+	bnz   tracesys_exit
 
 	b .Lret_from_system_call
 END(sys_clone_wrapper)
@@ -41,8 +41,8 @@ ENTRY(sys_clone3_wrapper)
 	DISCARD_CALLEE_SAVED_USER
 
 	GET_CURR_THR_INFO_FLAGS   r10
-	btst r10, TIF_SYSCALL_TRACE
-	bnz  tracesys_exit
+	and.f 0, r10, _TIF_SYSCALL_WORK
+	bnz   tracesys_exit
 
 	b .Lret_from_system_call
 END(sys_clone3_wrapper)
@@ -80,11 +80,6 @@ ENTRY(instr_service)
 
 	EXCEPTION_PROLOGUE
 
-	lr  r0, [efa]
-	mov r1, sp
-
-	FAKE_RET_FROM_EXCPN
-
 	bl  do_insterror_or_kprobe
 	b   ret_from_exception
 END(instr_service)
@@ -95,16 +90,15 @@ END(instr_service)
 
 ENTRY(EV_MachineCheck)
 
-	EXCEPTION_PROLOGUE
+	EXCEPTION_PROLOGUE_KEEP_AE	; ECR returned in r10
 
-	lr  r2, [ecr]
 	lr  r0, [efa]
 	mov r1, sp
 
-	; MC excpetions disable MMU
+	; MC exceptions disable MMU
 	ARC_MMU_REENABLE r3
 
-	lsr  	r3, r2, 8
+	lsr  	r3, r10, 8
 	bmsk 	r3, r3, 7
 	brne    r3, ECR_C_MCHK_DUP_TLB, 1f
 
@@ -129,11 +123,6 @@ ENTRY(EV_PrivilegeV)
 
 	EXCEPTION_PROLOGUE
 
-	lr  r0, [efa]
-	mov r1, sp
-
-	FAKE_RET_FROM_EXCPN
-
 	bl  do_privilege_fault
 	b   ret_from_exception
 END(EV_PrivilegeV)
@@ -145,11 +134,6 @@ ENTRY(EV_Extension)
 
 	EXCEPTION_PROLOGUE
 
-	lr  r0, [efa]
-	mov r1, sp
-
-	FAKE_RET_FROM_EXCPN
-
 	bl  do_extension_fault
 	b   ret_from_exception
 END(EV_Extension)
@@ -160,20 +144,19 @@ END(EV_Extension)
 ; syscall Tracing
 ; ---------------------------------------------
 tracesys:
-	; save EFA in case tracer wants the PC of traced task
-	; using ERET won't work since next-PC has already committed
+	; safekeep EFA (r12) if syscall tracer wanted PC
+	; for traps, ERET is pre-commit so points to next-PC
 	GET_CURR_TASK_FIELD_PTR   TASK_THREAD, r11
 	st  r12, [r11, THREAD_FAULT_ADDR]	; thread.fault_address
 
-	; PRE Sys Call Ptrace hook
-	mov r0, sp			; pt_regs needed
-	bl  @syscall_trace_entry
+	; PRE syscall trace hook
+	mov r0, sp				; pt_regs
+	bl  @syscall_trace_enter
 
 	; Tracing code now returns the syscall num (orig or modif)
 	mov r8, r0
 
 	; Do the Sys Call as we normally would.
-	; Validate the Sys Call number
 	cmp     r8,  NR_syscalls - 1
 	mov.hi  r0, -ENOSYS
 	bhi     tracesys_exit
@@ -190,78 +173,74 @@ tracesys:
 	ld  r6, [sp, PT_r6]
 	ld  r7, [sp, PT_r7]
 	ld.as   r9, [sys_call_table, r8]
-	jl      [r9]        ; Entry into Sys Call Handler
+	jl      [r9]
 
 tracesys_exit:
-	st  r0, [sp, PT_r0]     ; sys call return value in pt_regs
+	st  r0, [sp, PT_r0]
 
-	;POST Sys Call Ptrace Hook
+	; POST syscall trace hook
+	mov r0, sp		; pt_regs needed
 	bl  @syscall_trace_exit
-	b   ret_from_exception ; NOT ret_from_system_call at is saves r0 which
-	; we'd done before calling post hook above
+
+	; don't call ret_from_system_call as it saves r0, already done above
+	b   ret_from_exception
 
 ; ---------------------------------------------
 ; Breakpoint TRAP
 ; ---------------------------------------------
 trap_with_param:
 	mov r0, r12	; EFA in case ptracer/gdb wants stop_pc
-	mov r1, sp
+	mov r1, sp	; pt_regs
 
-	; Save callee regs in case gdb wants to have a look
-	; SP will grow up by size of CALLEE Reg-File
-	; NOTE: clobbers r12
+	; save callee regs in case tracer/gdb wants to peek
 	SAVE_CALLEE_SAVED_USER
 
-	; save location of saved Callee Regs @ thread_struct->pc
+	; safekeep ref to callee regs
 	GET_CURR_TASK_FIELD_PTR   TASK_THREAD, r10
 	st  sp, [r10, THREAD_CALLEE_REG]
 
-	; Call the trap handler
+	; call the non syscall trap handler
 	bl  do_non_swi_trap
 
-	; unwind stack to discard Callee saved Regs
+	; unwind stack to discard callee regs
 	DISCARD_CALLEE_SAVED_USER
 
 	b   ret_from_exception
 
 ; ---------------------------------------------
 ; syscall TRAP
-; ABI: (r0-r7) upto 8 args, (r8) syscall number
+; ABI: (r0-r7) up to 8 args, (r8) syscall number
 ; ---------------------------------------------
 
 ENTRY(EV_Trap)
 
-	EXCEPTION_PROLOGUE
+	EXCEPTION_PROLOGUE_KEEP_AE
 
 	lr  r12, [efa]
 
 	FAKE_RET_FROM_EXCPN
 
-	;============ TRAP 1   :breakpoints
-	; Check ECR for trap with arg (PROLOGUE ensures r10 has ECR)
+	;============ TRAP N : breakpoints, kprobes etc
 	bmsk.f 0, r10, 7
 	bnz    trap_with_param
 
-	;============ TRAP  (no param): syscall top level
+	;============ TRAP 0 (no param): syscall
 
-	; If syscall tracing ongoing, invoke pre-post-hooks
+	; syscall tracing ongoing, invoke pre-post-hooks around syscall
 	GET_CURR_THR_INFO_FLAGS   r10
-	btst r10, TIF_SYSCALL_TRACE
-	bnz tracesys  ; this never comes back
+	and.f 0, r10, _TIF_SYSCALL_WORK
+	bnz   tracesys  ; this never comes back
 
 	;============ Normal syscall case
 
-	; syscall num shd not exceed the total system calls avail
 	cmp     r8,  NR_syscalls - 1
 	mov.hi  r0, -ENOSYS
 	bhi     .Lret_from_system_call
 
-	; Offset into the syscall_table and call handler
 	ld.as   r9,[sys_call_table, r8]
-	jl      [r9]        ; Entry into Sys Call Handler
+	jl      [r9]
 
 .Lret_from_system_call:
-
 	st  r0, [sp, PT_r0]     ; sys call return value in pt_regs
 
 	; fall through to ret_from_exception
@@ -317,7 +296,7 @@ resume_user_mode_begin:
 	;      tracer might call PEEKUSR(CALLEE reg)
 	;
 	; NOTE: SP will grow up by size of CALLEE Reg-File
-	SAVE_CALLEE_SAVED_USER		; clobbers r12
+	SAVE_CALLEE_SAVED_USER
 
 	; save location of saved Callee Regs @ thread_struct->callee
 	GET_CURR_TASK_FIELD_PTR   TASK_THREAD, r10
diff --git a/arch/arc/kernel/head.S b/arch/arc/kernel/head.S
index 9152782444b5..8d541f53fae3 100644
--- a/arch/arc/kernel/head.S
+++ b/arch/arc/kernel/head.S
@@ -165,7 +165,7 @@ ENTRY(first_lines_of_secondary)
 	; setup stack (fp, sp)
 	mov	fp, 0
 
-	; set it's stack base to tsk->thread_info bottom
+	; set its stack base to tsk->thread_info bottom
 	GET_TSK_STACK_BASE r0, sp
 
 	j	start_kernel_secondary
diff --git a/arch/arc/kernel/intc-arcv2.c b/arch/arc/kernel/intc-arcv2.c
index 5cda19d0aa91..809edc59af25 100644
--- a/arch/arc/kernel/intc-arcv2.c
+++ b/arch/arc/kernel/intc-arcv2.c
@@ -56,7 +56,7 @@ void arc_init_IRQ(void)
 	WRITE_AUX(AUX_IRQ_CTRL, ictrl);
 
 	/*
-	 * ARCv2 core intc provides multiple interrupt priorities (upto 16).
+	 * ARCv2 core intc provides multiple interrupt priorities (up to 16).
 	 * Typical builds though have only two levels (0-high, 1-low)
 	 * Linux by default uses lower prio 1 for most irqs, reserving 0 for
 	 * NMI style interrupts in future (say perf)
@@ -108,7 +108,7 @@ static void arcv2_irq_unmask(struct irq_data *data)
 	write_aux_reg(AUX_IRQ_ENABLE, 1);
 }
 
-void arcv2_irq_enable(struct irq_data *data)
+static void arcv2_irq_enable(struct irq_data *data)
 {
 	/* set default priority */
 	write_aux_reg(AUX_IRQ_SELECT, data->hwirq);
@@ -170,7 +170,7 @@ init_onchip_IRQ(struct device_node *intc, struct device_node *parent)
 	if (parent)
 		panic("DeviceTree incore intc not a root irq controller\n");
 
-	root_domain = irq_domain_add_linear(intc, nr_cpu_irqs, &arcv2_irq_ops, NULL);
+	root_domain = irq_domain_create_linear(of_fwnode_handle(intc), nr_cpu_irqs, &arcv2_irq_ops, NULL);
 	if (!root_domain)
 		panic("root irq domain not avail\n");
 
@@ -178,7 +178,7 @@ init_onchip_IRQ(struct device_node *intc, struct device_node *parent)
 	 * Needed for primary domain lookup to succeed
 	 * This is a primary irqchip, and can never have a parent
 	 */
-	irq_set_default_host(root_domain);
+	irq_set_default_domain(root_domain);
 
 #ifdef CONFIG_SMP
 	irq_create_mapping(root_domain, IPI_IRQ);
diff --git a/arch/arc/kernel/intc-compact.c b/arch/arc/kernel/intc-compact.c
index 6885e422870e..1b159e9e0234 100644
--- a/arch/arc/kernel/intc-compact.c
+++ b/arch/arc/kernel/intc-compact.c
@@ -112,8 +112,9 @@ init_onchip_IRQ(struct device_node *intc, struct device_node *parent)
 	if (parent)
 		panic("DeviceTree incore intc not a root irq controller\n");
 
-	root_domain = irq_domain_add_linear(intc, NR_CPU_IRQS,
-					    &arc_intc_domain_ops, NULL);
+	root_domain = irq_domain_create_linear(of_fwnode_handle(intc),
+					       NR_CPU_IRQS,
+					       &arc_intc_domain_ops, NULL);
 	if (!root_domain)
 		panic("root irq domain not avail\n");
 
@@ -121,7 +122,7 @@ init_onchip_IRQ(struct device_node *intc, struct device_node *parent)
 	 * Needed for primary domain lookup to succeed
 	 * This is a primary irqchip, and can never have a parent
 	 */
-	irq_set_default_host(root_domain);
+	irq_set_default_domain(root_domain);
 
 	return 0;
 }
diff --git a/arch/arc/kernel/irq.c b/arch/arc/kernel/irq.c
index ef909dd4b40c..dd09b58ff82d 100644
--- a/arch/arc/kernel/irq.c
+++ b/arch/arc/kernel/irq.c
@@ -6,6 +6,8 @@
 #include <linux/interrupt.h>
 #include <linux/irqchip.h>
 #include <asm/mach_desc.h>
+
+#include <asm/irq_regs.h>
 #include <asm/smp.h>
 
 /*
@@ -39,5 +41,11 @@ void __init init_IRQ(void)
  */
 void arch_do_IRQ(unsigned int hwirq, struct pt_regs *regs)
 {
-	handle_domain_irq(NULL, hwirq, regs);
+	struct pt_regs *old_regs;
+
+	irq_enter();
+	old_regs = set_irq_regs(regs);
+	generic_handle_domain_irq(NULL, hwirq);
+	set_irq_regs(old_regs);
+	irq_exit();
 }
diff --git a/arch/arc/kernel/jump_label.c b/arch/arc/kernel/jump_label.c
index b8600dc325b5..70b74a5d047b 100644
--- a/arch/arc/kernel/jump_label.c
+++ b/arch/arc/kernel/jump_label.c
@@ -96,19 +96,6 @@ void arch_jump_label_transform(struct jump_entry *entry,
 	flush_icache_range(entry->code, entry->code + JUMP_LABEL_NOP_SIZE);
 }
 
-void arch_jump_label_transform_static(struct jump_entry *entry,
-				      enum jump_label_type type)
-{
-	/*
-	 * We use only one NOP type (1x, 4 byte) in arch_static_branch, so
-	 * there's no need to patch an identical NOP over the top of it here.
-	 * The generic code calls 'arch_jump_label_transform' if the NOP needs
-	 * to be replaced by a branch, so 'arch_jump_label_transform_static' is
-	 * never called with type other than JUMP_LABEL_NOP.
-	 */
-	BUG_ON(type != JUMP_LABEL_NOP);
-}
-
 #ifdef CONFIG_ARC_DBG_JUMP_LABEL
 #define SELFTEST_MSG	"ARC: instruction generation self-test: "
 
diff --git a/arch/arc/kernel/kgdb.c b/arch/arc/kernel/kgdb.c
index 345a0000554c..4f2b5951454f 100644
--- a/arch/arc/kernel/kgdb.c
+++ b/arch/arc/kernel/kgdb.c
@@ -175,7 +175,7 @@ void kgdb_trap(struct pt_regs *regs)
 	 * with trap_s 4 (compiled) breakpoints, continuation needs to
 	 * start after the breakpoint.
 	 */
-	if (regs->ecr_param == 3)
+	if (regs->ecr.param == 3)
 		instruction_pointer(regs) -= BREAK_INSTR_SIZE;
 
 	kgdb_handle_exception(1, SIGTRAP, 0, regs);
diff --git a/arch/arc/kernel/kprobes.c b/arch/arc/kernel/kprobes.c
index 5f0415fc7328..f8e2960832d9 100644
--- a/arch/arc/kernel/kprobes.c
+++ b/arch/arc/kernel/kprobes.c
@@ -190,7 +190,8 @@ static void __kprobes setup_singlestep(struct kprobe *p, struct pt_regs *regs)
 	}
 }
 
-int __kprobes arc_kprobe_handler(unsigned long addr, struct pt_regs *regs)
+static int
+__kprobes arc_kprobe_handler(unsigned long addr, struct pt_regs *regs)
 {
 	struct kprobe *p;
 	struct kprobe_ctlblk *kcb;
@@ -241,8 +242,8 @@ int __kprobes arc_kprobe_handler(unsigned long addr, struct pt_regs *regs)
 	return 0;
 }
 
-static int __kprobes arc_post_kprobe_handler(unsigned long addr,
-					 struct pt_regs *regs)
+static int
+__kprobes arc_post_kprobe_handler(unsigned long addr, struct pt_regs *regs)
 {
 	struct kprobe *cur = kprobe_running();
 	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
@@ -363,8 +364,9 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
 
 static void __used kretprobe_trampoline_holder(void)
 {
-	__asm__ __volatile__(".global kretprobe_trampoline\n"
-			     "kretprobe_trampoline:\n" "nop\n");
+	__asm__ __volatile__(".global __kretprobe_trampoline\n"
+			     "__kretprobe_trampoline:\n"
+			     "nop\n");
 }
 
 void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
@@ -375,13 +377,13 @@ void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
 	ri->fp = NULL;
 
 	/* Replace the return addr with trampoline addr */
-	regs->blink = (unsigned long)&kretprobe_trampoline;
+	regs->blink = (unsigned long)&__kretprobe_trampoline;
 }
 
 static int __kprobes trampoline_probe_handler(struct kprobe *p,
 					      struct pt_regs *regs)
 {
-	regs->ret = __kretprobe_trampoline_handler(regs, &kretprobe_trampoline, NULL);
+	regs->ret = __kretprobe_trampoline_handler(regs, NULL);
 
 	/* By returning a non zero value, we are telling the kprobe handler
 	 * that we don't want the post_handler to run
@@ -390,7 +392,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p,
 }
 
 static struct kprobe trampoline_p = {
-	.addr = (kprobe_opcode_t *) &kretprobe_trampoline,
+	.addr = (kprobe_opcode_t *) &__kretprobe_trampoline,
 	.pre_handler = trampoline_probe_handler
 };
 
@@ -402,7 +404,7 @@ int __init arch_init_kprobes(void)
 
 int __kprobes arch_trampoline_kprobe(struct kprobe *p)
 {
-	if (p->addr == (kprobe_opcode_t *) &kretprobe_trampoline)
+	if (p->addr == (kprobe_opcode_t *) &__kretprobe_trampoline)
 		return 1;
 
 	return 0;
diff --git a/arch/arc/kernel/mcip.c b/arch/arc/kernel/mcip.c
index f9fdb557c263..02b28a9324f4 100644
--- a/arch/arc/kernel/mcip.c
+++ b/arch/arc/kernel/mcip.c
@@ -165,8 +165,6 @@ static void mcip_probe_n_setup(void)
 		IS_AVAIL1(mp.idu, "IDU "),
 		IS_AVAIL1(mp.dbg, "DEBUG "),
 		IS_AVAIL1(mp.gfrc, "GFRC"));
-
-	cpuinfo_arc700[0].extn.gfrc = mp.gfrc;
 }
 
 struct plat_smp_ops plat_smp_ops = {
@@ -359,8 +357,6 @@ static void idu_cascade_isr(struct irq_desc *desc)
 static int idu_irq_map(struct irq_domain *d, unsigned int virq, irq_hw_number_t hwirq)
 {
 	irq_set_chip_and_handler(virq, &idu_irq_chip, handle_level_irq);
-	irq_set_status_flags(virq, IRQ_MOVE_PCNTXT);
-
 	return 0;
 }
 
@@ -395,7 +391,8 @@ idu_of_init(struct device_node *intc, struct device_node *parent)
 
 	pr_info("MCIP: IDU supports %u common irqs\n", nr_irqs);
 
-	domain = irq_domain_add_linear(intc, nr_irqs, &idu_irq_ops, NULL);
+	domain = irq_domain_create_linear(of_fwnode_handle(intc), nr_irqs,
+					  &idu_irq_ops, NULL);
 
 	/* Parent interrupts (core-intc) are already mapped */
 
diff --git a/arch/arc/kernel/perf_event.c b/arch/arc/kernel/perf_event.c
index 145722f80c9b..ed6d4f0cd621 100644
--- a/arch/arc/kernel/perf_event.c
+++ b/arch/arc/kernel/perf_event.c
@@ -17,6 +17,168 @@
 /* HW holds 8 symbols + one for null terminator */
 #define ARCPMU_EVENT_NAME_LEN	9
 
+/*
+ * Some ARC pct quirks:
+ *
+ * PERF_COUNT_HW_STALLED_CYCLES_BACKEND
+ * PERF_COUNT_HW_STALLED_CYCLES_FRONTEND
+ *	The ARC 700 can either measure stalls per pipeline stage, or all stalls
+ *	combined; for now we assign all stalls to STALLED_CYCLES_BACKEND
+ *	and all pipeline flushes (e.g. caused by mispredicts, etc.) to
+ *	STALLED_CYCLES_FRONTEND.
+ *
+ *	We could start multiple performance counters and combine everything
+ *	afterwards, but that makes it complicated.
+ *
+ *	Note that I$ cache misses aren't counted by either of the two!
+ */
+
+/*
+ * ARC PCT has hardware conditions with fixed "names" but variable "indexes"
+ * (based on a specific RTL build)
+ * Below is the static map between perf generic/arc specific event_id and
+ * h/w condition names.
+ * At the time of probe, we loop thru each index and find its name to
+ * complete the mapping of perf event_id to h/w index as latter is needed
+ * to program the counter really
+ */
+static const char * const arc_pmu_ev_hw_map[] = {
+	/* count cycles */
+	[PERF_COUNT_HW_CPU_CYCLES] = "crun",
+	[PERF_COUNT_HW_REF_CPU_CYCLES] = "crun",
+	[PERF_COUNT_HW_BUS_CYCLES] = "crun",
+
+	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = "bflush",
+	[PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = "bstall",
+
+	/* counts condition */
+	[PERF_COUNT_HW_INSTRUCTIONS] = "iall",
+	/* All jump instructions that are taken */
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = "ijmptak",
+#ifdef CONFIG_ISA_ARCV2
+	[PERF_COUNT_HW_BRANCH_MISSES] = "bpmp",
+#else
+	[PERF_COUNT_ARC_BPOK]         = "bpok",	  /* NP-NT, PT-T, PNT-NT */
+	[PERF_COUNT_HW_BRANCH_MISSES] = "bpfail", /* NP-T, PT-NT, PNT-T */
+#endif
+	[PERF_COUNT_ARC_LDC] = "imemrdc",	/* Instr: mem read cached */
+	[PERF_COUNT_ARC_STC] = "imemwrc",	/* Instr: mem write cached */
+
+	[PERF_COUNT_ARC_DCLM] = "dclm",		/* D-cache Load Miss */
+	[PERF_COUNT_ARC_DCSM] = "dcsm",		/* D-cache Store Miss */
+	[PERF_COUNT_ARC_ICM] = "icm",		/* I-cache Miss */
+	[PERF_COUNT_ARC_EDTLB] = "edtlb",	/* D-TLB Miss */
+	[PERF_COUNT_ARC_EITLB] = "eitlb",	/* I-TLB Miss */
+
+	[PERF_COUNT_HW_CACHE_REFERENCES] = "imemrdc",	/* Instr: mem read cached */
+	[PERF_COUNT_HW_CACHE_MISSES] = "dclm",		/* D-cache Load Miss */
+};
+
+#define C(_x)			PERF_COUNT_HW_CACHE_##_x
+#define CACHE_OP_UNSUPPORTED	0xffff
+
+static const unsigned int arc_pmu_cache_map[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+	[C(L1D)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= PERF_COUNT_ARC_LDC,
+			[C(RESULT_MISS)]	= PERF_COUNT_ARC_DCLM,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= PERF_COUNT_ARC_STC,
+			[C(RESULT_MISS)]	= PERF_COUNT_ARC_DCSM,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(L1I)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= PERF_COUNT_HW_INSTRUCTIONS,
+			[C(RESULT_MISS)]	= PERF_COUNT_ARC_ICM,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(LL)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(DTLB)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= PERF_COUNT_ARC_LDC,
+			[C(RESULT_MISS)]	= PERF_COUNT_ARC_EDTLB,
+		},
+			/* DTLB LD/ST Miss not segregated by h/w*/
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(ITLB)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= PERF_COUNT_ARC_EITLB,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(BPU)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)] = PERF_COUNT_HW_BRANCH_INSTRUCTIONS,
+			[C(RESULT_MISS)]	= PERF_COUNT_HW_BRANCH_MISSES,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(NODE)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+};
+
 enum arc_pmu_attr_groups {
 	ARCPMU_ATTR_GR_EVENTS,
 	ARCPMU_ATTR_GR_FORMATS,
@@ -328,7 +490,7 @@ static void arc_pmu_stop(struct perf_event *event, int flags)
 	}
 
 	if (!(event->hw.state & PERF_HES_STOPPED)) {
-		/* stop ARC pmu here */
+		/* stop hw counter here */
 		write_aux_reg(ARC_REG_PCT_INDEX, idx);
 
 		/* condition code #0 is always "never" */
@@ -361,7 +523,7 @@ static int arc_pmu_add(struct perf_event *event, int flags)
 {
 	struct arc_pmu_cpu *pmu_cpu = this_cpu_ptr(&arc_pmu_cpu);
 	struct hw_perf_event *hwc = &event->hw;
-	int idx = hwc->idx;
+	int idx;
 
 	idx = ffz(pmu_cpu->used_mask[0]);
 	if (idx == arc_pmu->n_counters)
@@ -437,10 +599,8 @@ static irqreturn_t arc_pmu_intr(int irq, void *dev)
 
 		arc_perf_event_update(event, &event->hw, event->hw.idx);
 		perf_sample_data_init(&data, 0, hwc->last_period);
-		if (arc_pmu_event_set_period(event)) {
-			if (perf_event_overflow(event, &data, regs))
-				arc_pmu_stop(event, 0);
-		}
+		if (arc_pmu_event_set_period(event))
+			perf_event_overflow(event, &data, regs);
 
 		active_ints &= ~BIT(idx);
 	} while (active_ints);
diff --git a/arch/arc/kernel/process.c b/arch/arc/kernel/process.c
index 3793876f42d9..8166d0908713 100644
--- a/arch/arc/kernel/process.c
+++ b/arch/arc/kernel/process.c
@@ -43,7 +43,7 @@ SYSCALL_DEFINE0(arc_gettls)
 	return task_thread_info(current)->thr_ptr;
 }
 
-SYSCALL_DEFINE3(arc_usr_cmpxchg, int *, uaddr, int, expected, int, new)
+SYSCALL_DEFINE3(arc_usr_cmpxchg, int __user *, uaddr, int, expected, int, new)
 {
 	struct pt_regs *regs = current_pt_regs();
 	u32 uval;
@@ -114,6 +114,8 @@ void arch_cpu_idle(void)
 		"sleep %0	\n"
 		:
 		:"I"(arg)); /* can't be "r" has to be embedded const */
+
+	raw_local_irq_disable();
 }
 
 #else	/* ARC700 */
@@ -122,6 +124,7 @@ void arch_cpu_idle(void)
 {
 	/* sleep, but enable both set E1/E2 (levels of interrupts) before committing */
 	__asm__ __volatile__("sleep 0x3	\n");
+	raw_local_irq_disable();
 }
 
 #endif
@@ -138,7 +141,7 @@ asmlinkage void ret_from_fork(void);
  * |    unused      |
  * |                |
  * ------------------
- * |     r25        |   <==== top of Stack (thread.ksp)
+ * |     r25        |   <==== top of Stack (thread_info.ksp)
  * ~                ~
  * |    --to--      |   (CALLEE Regs of kernel mode)
  * |     r13        |
@@ -159,13 +162,13 @@ asmlinkage void ret_from_fork(void);
  * |      SP        |
  * |    orig_r0     |
  * |    event/ECR   |
- * |    user_r25    |
  * ------------------  <===== END of PAGE
  */
-int copy_thread(unsigned long clone_flags, unsigned long usp,
-		unsigned long kthread_arg, struct task_struct *p,
-		unsigned long tls)
+int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 {
+	u64 clone_flags = args->flags;
+	unsigned long usp = args->stack;
+	unsigned long tls = args->tls;
 	struct pt_regs *c_regs;        /* child's pt_regs */
 	unsigned long *childksp;       /* to unwind out of __switch_to() */
 	struct callee_regs *c_callee;  /* child's callee regs */
@@ -178,24 +181,24 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 	c_callee = ((struct callee_regs *)childksp) - 1;
 
 	/*
-	 * __switch_to() uses thread.ksp to start unwinding stack
+	 * __switch_to() uses thread_info.ksp to start unwinding stack
 	 * For kernel threads we don't need to create callee regs, the
 	 * stack layout nevertheless needs to remain the same.
 	 * Also, since __switch_to anyways unwinds callee regs, we use
 	 * this to populate kernel thread entry-pt/args into callee regs,
 	 * so that ret_from_kernel_thread() becomes simpler.
 	 */
-	p->thread.ksp = (unsigned long)c_callee;	/* THREAD_KSP */
+	task_thread_info(p)->ksp = (unsigned long)c_callee;	/* THREAD_INFO_KSP */
 
 	/* __switch_to expects FP(0), BLINK(return addr) at top */
 	childksp[0] = 0;			/* fp */
 	childksp[1] = (unsigned long)ret_from_fork; /* blink */
 
-	if (unlikely(p->flags & (PF_KTHREAD | PF_IO_WORKER))) {
+	if (unlikely(args->fn)) {
 		memset(c_regs, 0, sizeof(struct pt_regs));
 
-		c_callee->r13 = kthread_arg;
-		c_callee->r14 = usp;  /* function */
+		c_callee->r13 = (unsigned long)args->fn_arg;
+		c_callee->r14 = (unsigned long)args->fn;
 
 		return 0;
 	}
@@ -239,16 +242,6 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 	 */
 	c_callee->r25 = task_thread_info(p)->thr_ptr;
 
-#ifdef CONFIG_ARC_CURR_IN_REG
-	/*
-	 * setup usermode thread pointer #2:
-	 * however for this special use of r25 in kernel, __switch_to() sets
-	 * r25 for kernel needs and only in the final return path is usermode
-	 * r25 setup, from pt_regs->user_r25. So set that up as well
-	 */
-	c_regs->user_r25 = c_callee->r25;
-#endif
-
 	return 0;
 }
 
@@ -294,7 +287,7 @@ int elf_check_arch(const struct elf32_hdr *x)
 	eflags = x->e_flags;
 	if ((eflags & EF_ARC_OSABI_MSK) != EF_ARC_OSABI_CURRENT) {
 		pr_err("ABI mismatch - you need newer toolchain\n");
-		force_sigsegv(SIGSEGV);
+		force_fatal_sig(SIGSEGV);
 		return 0;
 	}
 
diff --git a/arch/arc/kernel/ptrace.c b/arch/arc/kernel/ptrace.c
index 883391977fdf..cad5367b7c37 100644
--- a/arch/arc/kernel/ptrace.c
+++ b/arch/arc/kernel/ptrace.c
@@ -4,12 +4,95 @@
  */
 
 #include <linux/ptrace.h>
-#include <linux/tracehook.h>
 #include <linux/sched/task_stack.h>
 #include <linux/regset.h>
 #include <linux/unistd.h>
 #include <linux/elf.h>
 
+#define CREATE_TRACE_POINTS
+#include <trace/events/syscalls.h>
+
+struct pt_regs_offset {
+	const char *name;
+	int offset;
+};
+
+#define REG_OFFSET_NAME(r) {.name = #r, .offset = offsetof(struct pt_regs, r)}
+#define REG_OFFSET_END {.name = NULL, .offset = 0}
+
+#ifdef CONFIG_ISA_ARCOMPACT
+static const struct pt_regs_offset regoffset_table[] = {
+	REG_OFFSET_NAME(bta),
+	REG_OFFSET_NAME(lp_start),
+	REG_OFFSET_NAME(lp_end),
+	REG_OFFSET_NAME(lp_count),
+	REG_OFFSET_NAME(status32),
+	REG_OFFSET_NAME(ret),
+	REG_OFFSET_NAME(blink),
+	REG_OFFSET_NAME(fp),
+	REG_OFFSET_NAME(r26),
+	REG_OFFSET_NAME(r12),
+	REG_OFFSET_NAME(r11),
+	REG_OFFSET_NAME(r10),
+	REG_OFFSET_NAME(r9),
+	REG_OFFSET_NAME(r8),
+	REG_OFFSET_NAME(r7),
+	REG_OFFSET_NAME(r6),
+	REG_OFFSET_NAME(r5),
+	REG_OFFSET_NAME(r4),
+	REG_OFFSET_NAME(r3),
+	REG_OFFSET_NAME(r2),
+	REG_OFFSET_NAME(r1),
+	REG_OFFSET_NAME(r0),
+	REG_OFFSET_NAME(sp),
+	REG_OFFSET_NAME(orig_r0),
+	REG_OFFSET_NAME(ecr),
+	REG_OFFSET_END,
+};
+
+#else
+
+static const struct pt_regs_offset regoffset_table[] = {
+	REG_OFFSET_NAME(orig_r0),
+	REG_OFFSET_NAME(ecr),
+	REG_OFFSET_NAME(bta),
+	REG_OFFSET_NAME(r26),
+	REG_OFFSET_NAME(fp),
+	REG_OFFSET_NAME(sp),
+	REG_OFFSET_NAME(r12),
+	REG_OFFSET_NAME(r30),
+#ifdef CONFIG_ARC_HAS_ACCL_REGS
+	REG_OFFSET_NAME(r58),
+	REG_OFFSET_NAME(r59),
+#endif
+#ifdef CONFIG_ARC_DSP_SAVE_RESTORE_REGS
+	REG_OFFSET_NAME(DSP_CTRL),
+#endif
+	REG_OFFSET_NAME(r0),
+	REG_OFFSET_NAME(r1),
+	REG_OFFSET_NAME(r2),
+	REG_OFFSET_NAME(r3),
+	REG_OFFSET_NAME(r4),
+	REG_OFFSET_NAME(r5),
+	REG_OFFSET_NAME(r6),
+	REG_OFFSET_NAME(r7),
+	REG_OFFSET_NAME(r8),
+	REG_OFFSET_NAME(r9),
+	REG_OFFSET_NAME(r10),
+	REG_OFFSET_NAME(r11),
+	REG_OFFSET_NAME(blink),
+	REG_OFFSET_NAME(lp_end),
+	REG_OFFSET_NAME(lp_start),
+	REG_OFFSET_NAME(lp_count),
+	REG_OFFSET_NAME(ei),
+	REG_OFFSET_NAME(ldi),
+	REG_OFFSET_NAME(jli),
+	REG_OFFSET_NAME(ret),
+	REG_OFFSET_NAME(status32),
+	REG_OFFSET_END,
+};
+#endif
+
 static struct callee_regs *task_callee_regs(struct task_struct *tsk)
 {
 	struct callee_regs *tmp = (struct callee_regs *)tsk->thread.callee_reg;
@@ -100,7 +183,7 @@ static int genregs_set(struct task_struct *target,
 
 #define REG_IGNORE_ONE(LOC)		\
 	if (!ret)			\
-		ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf, \
+		user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf, \
 			offsetof(struct user_regs_struct, LOC), \
 			offsetof(struct user_regs_struct, LOC) + 4);
 
@@ -201,7 +284,7 @@ enum arc_getset {
 
 static const struct user_regset arc_regsets[] = {
 	[REGSET_CMN] = {
-	       .core_note_type = NT_PRSTATUS,
+	       USER_REGSET_NOTE_TYPE(PRSTATUS),
 	       .n = ELF_NGREG,
 	       .size = sizeof(unsigned long),
 	       .align = sizeof(unsigned long),
@@ -210,7 +293,7 @@ static const struct user_regset arc_regsets[] = {
 	},
 #ifdef CONFIG_ISA_ARCV2
 	[REGSET_ARCV2] = {
-	       .core_note_type = NT_ARC_V2,
+	       USER_REGSET_NOTE_TYPE(ARC_V2),
 	       .n = ELF_ARCV2REG,
 	       .size = sizeof(unsigned long),
 	       .align = sizeof(unsigned long),
@@ -256,15 +339,63 @@ long arch_ptrace(struct task_struct *child, long request,
 	return ret;
 }
 
-asmlinkage int syscall_trace_entry(struct pt_regs *regs)
+asmlinkage int syscall_trace_enter(struct pt_regs *regs)
 {
-	if (tracehook_report_syscall_entry(regs))
-		return ULONG_MAX;
+	if (test_thread_flag(TIF_SYSCALL_TRACE))
+		if (ptrace_report_syscall_entry(regs))
+			return ULONG_MAX;
+
+#ifdef CONFIG_HAVE_SYSCALL_TRACEPOINTS
+	if (test_thread_flag(TIF_SYSCALL_TRACEPOINT))
+		trace_sys_enter(regs, syscall_get_nr(current, regs));
+#endif
 
 	return regs->r8;
 }
 
 asmlinkage void syscall_trace_exit(struct pt_regs *regs)
 {
-	tracehook_report_syscall_exit(regs, 0);
+	if (test_thread_flag(TIF_SYSCALL_TRACE))
+		ptrace_report_syscall_exit(regs, 0);
+
+#ifdef CONFIG_HAVE_SYSCALL_TRACEPOINTS
+	if (test_thread_flag(TIF_SYSCALL_TRACEPOINT))
+		trace_sys_exit(regs, regs_return_value(regs));
+#endif
+}
+
+int regs_query_register_offset(const char *name)
+{
+	const struct pt_regs_offset *roff;
+
+	for (roff = regoffset_table; roff->name != NULL; roff++)
+		if (!strcmp(roff->name, name))
+			return roff->offset;
+	return -EINVAL;
+}
+
+const char *regs_query_register_name(unsigned int offset)
+{
+	const struct pt_regs_offset *roff;
+	for (roff = regoffset_table; roff->name != NULL; roff++)
+		if (roff->offset == offset)
+			return roff->name;
+	return NULL;
+}
+
+bool regs_within_kernel_stack(struct pt_regs *regs, unsigned long addr)
+{
+	return (addr & ~(THREAD_SIZE - 1))  ==
+		(kernel_stack_pointer(regs) & ~(THREAD_SIZE - 1));
+}
+
+unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs, unsigned int n)
+{
+	unsigned long *addr = (unsigned long *)kernel_stack_pointer(regs);
+
+	addr += n;
+	if (regs_within_kernel_stack(regs, (unsigned long)addr))
+		return *addr;
+	else
+		return 0;
 }
diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c
index 41f07b3e594e..7b6a9beba9db 100644
--- a/arch/arc/kernel/setup.c
+++ b/arch/arc/kernel/setup.c
@@ -29,6 +29,7 @@
 #include <asm/mach_desc.h>
 #include <asm/smp.h>
 #include <asm/dsp-impl.h>
+#include <soc/arc/mcip.h>
 
 #define FIX_PTR(x)  __asm__ __volatile__(";" : "+r"(x))
 
@@ -43,19 +44,22 @@ const struct machine_desc *machine_desc;
 
 struct task_struct *_current_task[NR_CPUS];	/* For stack switching */
 
-struct cpuinfo_arc cpuinfo_arc700[NR_CPUS];
+struct cpuinfo_arc {
+	int arcver;
+	unsigned int t0:1, t1:1;
+	struct {
+		unsigned long base;
+		unsigned int sz;
+	} iccm, dccm;
+};
+
+#ifdef CONFIG_ISA_ARCV2
 
-static const struct id_to_str arc_legacy_rel[] = {
+static const struct id_to_str arc_hs_rel[] = {
 	/* ID.ARCVER,	Release */
-#ifdef CONFIG_ISA_ARCOMPACT
-	{ 0x34, 	"R4.10"},
-	{ 0x35, 	"R4.11"},
-#else
 	{ 0x51, 	"R2.0" },
 	{ 0x52, 	"R2.1" },
 	{ 0x53,		"R3.0" },
-#endif
-	{ 0x00,		NULL   }
 };
 
 static const struct id_to_str arc_hs_ver54_rel[] = {
@@ -66,323 +70,294 @@ static const struct id_to_str arc_hs_ver54_rel[] = {
 	{  3,		"R4.00a"},
 	{  0xFF,	NULL   }
 };
+#endif
 
-static void read_decode_ccm_bcr(struct cpuinfo_arc *cpu)
+static int
+arcompact_mumbojumbo(int c, struct cpuinfo_arc *info, char *buf, int len)
 {
-	if (is_isa_arcompact()) {
-		struct bcr_iccm_arcompact iccm;
-		struct bcr_dccm_arcompact dccm;
+	int n = 0;
+#ifdef CONFIG_ISA_ARCOMPACT
+	char *cpu_nm, *isa_nm = "ARCompact";
+	struct bcr_fp_arcompact fpu_sp, fpu_dp;
+	int atomic = 0, be, present;
+	int bpu_full, bpu_cache, bpu_pred;
+	struct bcr_bpu_arcompact bpu;
+	struct bcr_iccm_arcompact iccm;
+	struct bcr_dccm_arcompact dccm;
+	struct bcr_generic isa;
 
-		READ_BCR(ARC_REG_ICCM_BUILD, iccm);
-		if (iccm.ver) {
-			cpu->iccm.sz = 4096 << iccm.sz;	/* 8K to 512K */
-			cpu->iccm.base_addr = iccm.base << 16;
-		}
+	READ_BCR(ARC_REG_ISA_CFG_BCR, isa);
 
-		READ_BCR(ARC_REG_DCCM_BUILD, dccm);
-		if (dccm.ver) {
-			unsigned long base;
-			cpu->dccm.sz = 2048 << dccm.sz;	/* 2K to 256K */
+	if (!isa.ver)	/* ISA BCR absent, use Kconfig info */
+		atomic = IS_ENABLED(CONFIG_ARC_HAS_LLSC);
+	else {
+		/* ARC700_BUILD only has 2 bits of isa info */
+		atomic = isa.info & 1;
+	}
 
-			base = read_aux_reg(ARC_REG_DCCM_BASE_BUILD);
-			cpu->dccm.base_addr = base & ~0xF;
-		}
-	} else {
-		struct bcr_iccm_arcv2 iccm;
-		struct bcr_dccm_arcv2 dccm;
-		unsigned long region;
-
-		READ_BCR(ARC_REG_ICCM_BUILD, iccm);
-		if (iccm.ver) {
-			cpu->iccm.sz = 256 << iccm.sz00;	/* 512B to 16M */
-			if (iccm.sz00 == 0xF && iccm.sz01 > 0)
-				cpu->iccm.sz <<= iccm.sz01;
-
-			region = read_aux_reg(ARC_REG_AUX_ICCM);
-			cpu->iccm.base_addr = region & 0xF0000000;
-		}
+	be = IS_ENABLED(CONFIG_CPU_BIG_ENDIAN);
 
-		READ_BCR(ARC_REG_DCCM_BUILD, dccm);
-		if (dccm.ver) {
-			cpu->dccm.sz = 256 << dccm.sz0;
-			if (dccm.sz0 == 0xF && dccm.sz1 > 0)
-				cpu->dccm.sz <<= dccm.sz1;
+	if (info->arcver < 0x34)
+		cpu_nm = "ARC750";
+	else
+		cpu_nm = "ARC770";
 
-			region = read_aux_reg(ARC_REG_AUX_DCCM);
-			cpu->dccm.base_addr = region & 0xF0000000;
-		}
-	}
-}
+	n += scnprintf(buf + n, len - n, "processor [%d]\t: %s (%s ISA) %s%s%s\n",
+		       c, cpu_nm, isa_nm,
+		       IS_AVAIL2(atomic, "atomic ", CONFIG_ARC_HAS_LLSC),
+		       IS_AVAIL1(be, "[Big-Endian]"));
 
-static void decode_arc_core(struct cpuinfo_arc *cpu)
-{
-	struct bcr_uarch_build_arcv2 uarch;
-	const struct id_to_str *tbl;
-
-	if (cpu->core.family < 0x54) { /* includes arc700 */
+	READ_BCR(ARC_REG_FP_BCR, fpu_sp);
+	READ_BCR(ARC_REG_DPFP_BCR, fpu_dp);
 
-		for (tbl = &arc_legacy_rel[0]; tbl->id != 0; tbl++) {
-			if (cpu->core.family == tbl->id) {
-				cpu->release = tbl->str;
-				break;
-			}
-		}
+	if (fpu_sp.ver | fpu_dp.ver)
+		n += scnprintf(buf + n, len - n, "FPU\t\t: %s%s\n",
+			       IS_AVAIL1(fpu_sp.ver, "SP "),
+			       IS_AVAIL1(fpu_dp.ver, "DP "));
 
-		if (is_isa_arcompact())
-			cpu->name = "ARC700";
-		else if (tbl->str)
-			cpu->name = "HS38";
-		else
-			cpu->name = cpu->release = "Unknown";
+	READ_BCR(ARC_REG_BPU_BCR, bpu);
+	bpu_full = bpu.fam ? 1 : 0;
+	bpu_cache = 256 << (bpu.ent - 1);
+	bpu_pred = 256 << (bpu.ent - 1);
 
-		return;
+	n += scnprintf(buf + n, len - n,
+			"BPU\t\t: %s%s match, cache:%d, Predict Table:%d\n",
+			IS_AVAIL1(bpu_full, "full"),
+			IS_AVAIL1(!bpu_full, "partial"),
+			bpu_cache, bpu_pred);
+
+	READ_BCR(ARC_REG_ICCM_BUILD, iccm);
+	if (iccm.ver) {
+		info->iccm.sz = 4096 << iccm.sz;	/* 8K to 512K */
+		info->iccm.base = iccm.base << 16;
 	}
 
-	/*
-	 * Initial HS cores bumped AUX IDENTITY.ARCVER for each release until
-	 * ARCVER 0x54 which introduced AUX MICRO_ARCH_BUILD and subsequent
-	 * releases only update it.
-	 */
-	READ_BCR(ARC_REG_MICRO_ARCH_BCR, uarch);
-
-	if (uarch.prod == 4) {
-		cpu->name = "HS48";
-		cpu->extn.dual = 1;
+	READ_BCR(ARC_REG_DCCM_BUILD, dccm);
+	if (dccm.ver) {
+		unsigned long base;
+		info->dccm.sz = 2048 << dccm.sz;	/* 2K to 256K */
 
-	} else {
-		cpu->name = "HS38";
+		base = read_aux_reg(ARC_REG_DCCM_BASE_BUILD);
+		info->dccm.base = base & ~0xF;
 	}
 
-	for (tbl = &arc_hs_ver54_rel[0]; tbl->id != 0xFF; tbl++) {
-		if (uarch.maj == tbl->id) {
-			cpu->release = tbl->str;
-			break;
-		}
-	}
+	/* ARCompact ISA specific sanity checks */
+	present = fpu_dp.ver;	/* SP has no arch visible regs */
+	CHK_OPT_STRICT(CONFIG_ARC_FPU_SAVE_RESTORE, present);
+#endif
+	return n;
+
 }
 
-static void read_arc_build_cfg_regs(void)
+static int arcv2_mumbojumbo(int c, struct cpuinfo_arc *info, char *buf, int len)
 {
-	struct bcr_timer timer;
-	struct bcr_generic bcr;
-	struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
+	int n = 0;
+#ifdef CONFIG_ISA_ARCV2
+	const char *release = "", *cpu_nm = "HS38", *isa_nm = "ARCv2";
+	int dual_issue = 0, dual_enb = 0, mpy_opt, present;
+	int bpu_full, bpu_cache, bpu_pred, bpu_ret_stk;
+	char mpy_nm[16], lpb_nm[32];
 	struct bcr_isa_arcv2 isa;
-	struct bcr_actionpoint ap;
-
-	FIX_PTR(cpu);
+	struct bcr_mpy mpy;
+	struct bcr_fp_arcv2 fpu;
+	struct bcr_bpu_arcv2 bpu;
+	struct bcr_lpb lpb;
+	struct bcr_iccm_arcv2 iccm;
+	struct bcr_dccm_arcv2 dccm;
+	struct bcr_erp erp;
 
-	READ_BCR(AUX_IDENTITY, cpu->core);
-	decode_arc_core(cpu);
-
-	READ_BCR(ARC_REG_TIMERS_BCR, timer);
-	cpu->extn.timer0 = timer.t0;
-	cpu->extn.timer1 = timer.t1;
-	cpu->extn.rtc = timer.rtc;
-
-	cpu->vec_base = read_aux_reg(AUX_INTR_VEC_BASE);
-
-	READ_BCR(ARC_REG_MUL_BCR, cpu->extn_mpy);
+	/*
+	 * Initial HS cores bumped AUX IDENTITY.ARCVER for each release until
+	 * ARCVER 0x54 which introduced AUX MICRO_ARCH_BUILD and subsequent
+	 * releases only update it.
+	 */
 
-	/* Read CCM BCRs for boot reporting even if not enabled in Kconfig */
-	read_decode_ccm_bcr(cpu);
+	if (info->arcver > 0x50 && info->arcver <= 0x53) {
+		release = arc_hs_rel[info->arcver - 0x51].str;
+	} else {
+		const struct id_to_str *tbl;
+		struct bcr_uarch_build uarch;
 
-	read_decode_mmu_bcr();
-	read_decode_cache_bcr();
+		READ_BCR(ARC_REG_MICRO_ARCH_BCR, uarch);
 
-	if (is_isa_arcompact()) {
-		struct bcr_fp_arcompact sp, dp;
-		struct bcr_bpu_arcompact bpu;
-
-		READ_BCR(ARC_REG_FP_BCR, sp);
-		READ_BCR(ARC_REG_DPFP_BCR, dp);
-		cpu->extn.fpu_sp = sp.ver ? 1 : 0;
-		cpu->extn.fpu_dp = dp.ver ? 1 : 0;
-
-		READ_BCR(ARC_REG_BPU_BCR, bpu);
-		cpu->bpu.ver = bpu.ver;
-		cpu->bpu.full = bpu.fam ? 1 : 0;
-		if (bpu.ent) {
-			cpu->bpu.num_cache = 256 << (bpu.ent - 1);
-			cpu->bpu.num_pred = 256 << (bpu.ent - 1);
+		for (tbl = &arc_hs_ver54_rel[0]; tbl->id != 0xFF; tbl++) {
+			if (uarch.maj == tbl->id) {
+				release = tbl->str;
+				break;
+			}
 		}
-	} else {
-		struct bcr_fp_arcv2 spdp;
-		struct bcr_bpu_arcv2 bpu;
-
-		READ_BCR(ARC_REG_FP_V2_BCR, spdp);
-		cpu->extn.fpu_sp = spdp.sp ? 1 : 0;
-		cpu->extn.fpu_dp = spdp.dp ? 1 : 0;
-
-		READ_BCR(ARC_REG_BPU_BCR, bpu);
-		cpu->bpu.ver = bpu.ver;
-		cpu->bpu.full = bpu.ft;
-		cpu->bpu.num_cache = 256 << bpu.bce;
-		cpu->bpu.num_pred = 2048 << bpu.pte;
-		cpu->bpu.ret_stk = 4 << bpu.rse;
-
-		/* if dual issue hardware, is it enabled ? */
-		if (cpu->extn.dual) {
+		if (uarch.prod == 4) {
 			unsigned int exec_ctrl;
 
+			cpu_nm = "HS48";
+			dual_issue = 1;
+			/* if dual issue hardware, is it enabled ? */
 			READ_BCR(AUX_EXEC_CTRL, exec_ctrl);
-			cpu->extn.dual_enb = !(exec_ctrl & 1);
+			dual_enb = !(exec_ctrl & 1);
 		}
 	}
 
-	READ_BCR(ARC_REG_AP_BCR, ap);
-	if (ap.ver) {
-		cpu->extn.ap_num = 2 << ap.num;
-		cpu->extn.ap_full = !ap.min;
-	}
-
-	READ_BCR(ARC_REG_SMART_BCR, bcr);
-	cpu->extn.smart = bcr.ver ? 1 : 0;
-
-	READ_BCR(ARC_REG_RTT_BCR, bcr);
-	cpu->extn.rtt = bcr.ver ? 1 : 0;
-
 	READ_BCR(ARC_REG_ISA_CFG_BCR, isa);
 
-	/* some hacks for lack of feature BCR info in old ARC700 cores */
-	if (is_isa_arcompact()) {
-		if (!isa.ver)	/* ISA BCR absent, use Kconfig info */
-			cpu->isa.atomic = IS_ENABLED(CONFIG_ARC_HAS_LLSC);
-		else {
-			/* ARC700_BUILD only has 2 bits of isa info */
-			struct bcr_generic bcr = *(struct bcr_generic *)&isa;
-			cpu->isa.atomic = bcr.info & 1;
-		}
-
-		cpu->isa.be = IS_ENABLED(CONFIG_CPU_BIG_ENDIAN);
+	n += scnprintf(buf + n, len - n, "processor [%d]\t: %s %s (%s ISA) %s%s%s\n",
+		       c, cpu_nm, release, isa_nm,
+		       IS_AVAIL1(isa.be, "[Big-Endian]"),
+		       IS_AVAIL3(dual_issue, dual_enb, " Dual-Issue "));
+
+	READ_BCR(ARC_REG_MPY_BCR, mpy);
+	mpy_opt = 2;	/* stock MPY/MPYH */
+	if (mpy.dsp)	/* OPT 7-9 */
+		mpy_opt = mpy.dsp + 6;
+
+	scnprintf(mpy_nm, 16, "mpy[opt %d] ", mpy_opt);
+
+	READ_BCR(ARC_REG_FP_V2_BCR, fpu);
+
+	n += scnprintf(buf + n, len - n, "ISA Extn\t: %s%s%s%s%s%s%s%s%s%s%s\n",
+		       IS_AVAIL2(isa.atomic, "atomic ", CONFIG_ARC_HAS_LLSC),
+		       IS_AVAIL2(isa.ldd, "ll64 ", CONFIG_ARC_HAS_LL64),
+		       IS_AVAIL2(isa.unalign, "unalign ", CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS),
+		       IS_AVAIL1(mpy.ver, mpy_nm),
+		       IS_AVAIL1(isa.div_rem, "div_rem "),
+		       IS_AVAIL1((fpu.sp | fpu.dp), "  FPU:"),
+		       IS_AVAIL1(fpu.sp, " sp"),
+		       IS_AVAIL1(fpu.dp, " dp"));
+
+	READ_BCR(ARC_REG_BPU_BCR, bpu);
+	bpu_full = bpu.ft;
+	bpu_cache = 256 << bpu.bce;
+	bpu_pred = 2048 << bpu.pte;
+	bpu_ret_stk = 4 << bpu.rse;
+
+	READ_BCR(ARC_REG_LPB_BUILD, lpb);
+	if (lpb.ver) {
+		unsigned int ctl;
+		ctl = read_aux_reg(ARC_REG_LPB_CTRL);
+
+		scnprintf(lpb_nm, sizeof(lpb_nm), " Loop Buffer:%d %s",
+			  lpb.entries, IS_DISABLED_RUN(!ctl));
+	}
 
-		 /* there's no direct way to distinguish 750 vs. 770 */
-		if (unlikely(cpu->core.family < 0x34 || cpu->mmu.ver < 3))
-			cpu->name = "ARC750";
-	} else {
-		cpu->isa = isa;
+	n += scnprintf(buf + n, len - n,
+			"BPU\t\t: %s%s match, cache:%d, Predict Table:%d Return stk: %d%s\n",
+			IS_AVAIL1(bpu_full, "full"),
+			IS_AVAIL1(!bpu_full, "partial"),
+			bpu_cache, bpu_pred, bpu_ret_stk,
+			lpb_nm);
+
+	READ_BCR(ARC_REG_ICCM_BUILD, iccm);
+	if (iccm.ver) {
+		unsigned long base;
+		info->iccm.sz = 256 << iccm.sz00;	/* 512B to 16M */
+		if (iccm.sz00 == 0xF && iccm.sz01 > 0)
+			info->iccm.sz <<= iccm.sz01;
+		base = read_aux_reg(ARC_REG_AUX_ICCM);
+		info->iccm.base = base & 0xF0000000;
 	}
-}
 
-static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
-{
-	struct cpuinfo_arc *cpu = &cpuinfo_arc700[cpu_id];
-	struct bcr_identity *core = &cpu->core;
-	char mpy_opt[16];
-	int n = 0;
+	READ_BCR(ARC_REG_DCCM_BUILD, dccm);
+	if (dccm.ver) {
+		unsigned long base;
+		info->dccm.sz = 256 << dccm.sz0;
+		if (dccm.sz0 == 0xF && dccm.sz1 > 0)
+			info->dccm.sz <<= dccm.sz1;
+		base = read_aux_reg(ARC_REG_AUX_DCCM);
+		info->dccm.base = base & 0xF0000000;
+	}
 
-	FIX_PTR(cpu);
+	/* Error Protection: ECC/Parity */
+	READ_BCR(ARC_REG_ERP_BUILD, erp);
+	if (erp.ver) {
+		struct ctl_erp ctl;
+		READ_BCR(ARC_REG_ERP_CTRL, ctl);
+		/* inverted bits: 0 means enabled */
+		n += scnprintf(buf + n, len - n, "Extn [ECC]\t: %s%s%s%s%s%s\n",
+				IS_AVAIL3(erp.ic,  !ctl.dpi, "IC "),
+				IS_AVAIL3(erp.dc,  !ctl.dpd, "DC "),
+				IS_AVAIL3(erp.mmu, !ctl.mpd, "MMU "));
+	}
 
-	n += scnprintf(buf + n, len - n,
-		       "\nIDENTITY\t: ARCVER [%#02x] ARCNUM [%#02x] CHIPID [%#4x]\n",
-		       core->family, core->cpu_id, core->chip_id);
+	/* ARCv2 ISA specific sanity checks */
+	present = fpu.sp | fpu.dp | mpy.dsp;	/* DSP and/or FPU */
+	CHK_OPT_STRICT(CONFIG_ARC_HAS_ACCL_REGS, present);
 
-	n += scnprintf(buf + n, len - n, "processor [%d]\t: %s %s (%s ISA) %s%s%s\n",
-		       cpu_id, cpu->name, cpu->release,
-		       is_isa_arcompact() ? "ARCompact" : "ARCv2",
-		       IS_AVAIL1(cpu->isa.be, "[Big-Endian]"),
-		       IS_AVAIL3(cpu->extn.dual, cpu->extn.dual_enb, " Dual-Issue "));
+	dsp_config_check();
+#endif
+	return n;
+}
 
-	n += scnprintf(buf + n, len - n, "Timers\t\t: %s%s%s%s%s%s\nISA Extn\t: ",
-		       IS_AVAIL1(cpu->extn.timer0, "Timer0 "),
-		       IS_AVAIL1(cpu->extn.timer1, "Timer1 "),
-		       IS_AVAIL2(cpu->extn.rtc, "RTC [UP 64-bit] ", CONFIG_ARC_TIMERS_64BIT),
-		       IS_AVAIL2(cpu->extn.gfrc, "GFRC [SMP 64-bit] ", CONFIG_ARC_TIMERS_64BIT));
+static char *arc_cpu_mumbojumbo(int c, struct cpuinfo_arc *info, char *buf, int len)
+{
+	struct bcr_identity ident;
+	struct bcr_timer timer;
+	struct bcr_generic bcr;
+	struct mcip_bcr mp;
+	struct bcr_actionpoint ap;
+	unsigned long vec_base;
+	int ap_num, ap_full, smart, rtt, n;
 
-	if (cpu->extn_mpy.ver) {
-		if (is_isa_arcompact()) {
-			scnprintf(mpy_opt, 16, "mpy");
-		} else {
+	memset(info, 0, sizeof(struct cpuinfo_arc));
 
-			int opt = 2;	/* stock MPY/MPYH */
+	READ_BCR(AUX_IDENTITY, ident);
+	info->arcver = ident.family;
 
-			if (cpu->extn_mpy.dsp)	/* OPT 7-9 */
-				opt = cpu->extn_mpy.dsp + 6;
+	n = scnprintf(buf, len,
+		       "\nIDENTITY\t: ARCVER [%#02x] ARCNUM [%#02x] CHIPID [%#4x]\n",
+		       ident.family, ident.cpu_id, ident.chip_id);
 
-			scnprintf(mpy_opt, 16, "mpy[opt %d] ", opt);
-		}
+	if (is_isa_arcompact()) {
+		n += arcompact_mumbojumbo(c, info, buf + n, len - n);
+	} else if (is_isa_arcv2()){
+		n += arcv2_mumbojumbo(c, info, buf + n, len - n);
 	}
 
-	n += scnprintf(buf + n, len - n, "%s%s%s%s%s%s%s%s\n",
-		       IS_AVAIL2(cpu->isa.atomic, "atomic ", CONFIG_ARC_HAS_LLSC),
-		       IS_AVAIL2(cpu->isa.ldd, "ll64 ", CONFIG_ARC_HAS_LL64),
-		       IS_AVAIL2(cpu->isa.unalign, "unalign ", CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS),
-		       IS_AVAIL1(cpu->extn_mpy.ver, mpy_opt),
-		       IS_AVAIL1(cpu->isa.div_rem, "div_rem "));
+	n += arc_mmu_mumbojumbo(c, buf + n, len - n);
+	n += arc_cache_mumbojumbo(c, buf + n, len - n);
 
-	if (cpu->bpu.ver) {
-		n += scnprintf(buf + n, len - n,
-			      "BPU\t\t: %s%s match, cache:%d, Predict Table:%d Return stk: %d",
-			      IS_AVAIL1(cpu->bpu.full, "full"),
-			      IS_AVAIL1(!cpu->bpu.full, "partial"),
-			      cpu->bpu.num_cache, cpu->bpu.num_pred, cpu->bpu.ret_stk);
-
-		if (is_isa_arcv2()) {
-			struct bcr_lpb lpb;
-
-			READ_BCR(ARC_REG_LPB_BUILD, lpb);
-			if (lpb.ver) {
-				unsigned int ctl;
-				ctl = read_aux_reg(ARC_REG_LPB_CTRL);
-
-				n += scnprintf(buf + n, len - n, " Loop Buffer:%d %s",
-					       lpb.entries,
-					       IS_DISABLED_RUN(!ctl));
-			}
-		}
-		n += scnprintf(buf + n, len - n, "\n");
-	}
+	READ_BCR(ARC_REG_TIMERS_BCR, timer);
+	info->t0 = timer.t0;
+	info->t1 = timer.t1;
 
-	return buf;
-}
+	READ_BCR(ARC_REG_MCIP_BCR, mp);
+	vec_base = read_aux_reg(AUX_INTR_VEC_BASE);
 
-static char *arc_extn_mumbojumbo(int cpu_id, char *buf, int len)
-{
-	int n = 0;
-	struct cpuinfo_arc *cpu = &cpuinfo_arc700[cpu_id];
+	n += scnprintf(buf + n, len - n,
+		       "Timers\t\t: %s%s%s%s%s%s\nVector Table\t: %#lx\n",
+		       IS_AVAIL1(timer.t0, "Timer0 "),
+		       IS_AVAIL1(timer.t1, "Timer1 "),
+		       IS_AVAIL2(timer.rtc, "RTC [UP 64-bit] ", CONFIG_ARC_TIMERS_64BIT),
+		       IS_AVAIL2(mp.gfrc, "GFRC [SMP 64-bit] ", CONFIG_ARC_TIMERS_64BIT),
+		       vec_base);
 
-	FIX_PTR(cpu);
+	READ_BCR(ARC_REG_AP_BCR, ap);
+	if (ap.ver) {
+		ap_num = 2 << ap.num;
+		ap_full = !ap.min;
+	}
 
-	n += scnprintf(buf + n, len - n, "Vector Table\t: %#x\n", cpu->vec_base);
+	READ_BCR(ARC_REG_SMART_BCR, bcr);
+	smart = bcr.ver ? 1 : 0;
 
-	if (cpu->extn.fpu_sp || cpu->extn.fpu_dp)
-		n += scnprintf(buf + n, len - n, "FPU\t\t: %s%s\n",
-			       IS_AVAIL1(cpu->extn.fpu_sp, "SP "),
-			       IS_AVAIL1(cpu->extn.fpu_dp, "DP "));
+	READ_BCR(ARC_REG_RTT_BCR, bcr);
+	rtt = bcr.ver ? 1 : 0;
 
-	if (cpu->extn.ap_num | cpu->extn.smart | cpu->extn.rtt) {
+	if (ap.ver | smart | rtt) {
 		n += scnprintf(buf + n, len - n, "DEBUG\t\t: %s%s",
-			       IS_AVAIL1(cpu->extn.smart, "smaRT "),
-			       IS_AVAIL1(cpu->extn.rtt, "RTT "));
-		if (cpu->extn.ap_num) {
+			       IS_AVAIL1(smart, "smaRT "),
+			       IS_AVAIL1(rtt, "RTT "));
+		if (ap.ver) {
 			n += scnprintf(buf + n, len - n, "ActionPoint %d/%s",
-				       cpu->extn.ap_num,
-				       cpu->extn.ap_full ? "full":"min");
+				       ap_num,
+				       ap_full ? "full":"min");
 		}
 		n += scnprintf(buf + n, len - n, "\n");
 	}
 
-	if (cpu->dccm.sz || cpu->iccm.sz)
-		n += scnprintf(buf + n, len - n, "Extn [CCM]\t: DCCM @ %x, %d KB / ICCM: @ %x, %d KB\n",
-			       cpu->dccm.base_addr, TO_KB(cpu->dccm.sz),
-			       cpu->iccm.base_addr, TO_KB(cpu->iccm.sz));
-
-	if (is_isa_arcv2()) {
-
-		/* Error Protection: ECC/Parity */
-		struct bcr_erp erp;
-		READ_BCR(ARC_REG_ERP_BUILD, erp);
-
-		if (erp.ver) {
-			struct  ctl_erp ctl;
-			READ_BCR(ARC_REG_ERP_CTRL, ctl);
-
-			/* inverted bits: 0 means enabled */
-			n += scnprintf(buf + n, len - n, "Extn [ECC]\t: %s%s%s%s%s%s\n",
-				IS_AVAIL3(erp.ic,  !ctl.dpi, "IC "),
-				IS_AVAIL3(erp.dc,  !ctl.dpd, "DC "),
-				IS_AVAIL3(erp.mmu, !ctl.mpd, "MMU "));
-		}
-	}
+	if (info->dccm.sz || info->iccm.sz)
+		n += scnprintf(buf + n, len - n,
+			       "Extn [CCM]\t: DCCM @ %lx, %d KB / ICCM: @ %lx, %d KB\n",
+			       info->dccm.base, TO_KB(info->dccm.sz),
+			       info->iccm.base, TO_KB(info->iccm.sz));
 
 	return buf;
 }
@@ -401,51 +376,33 @@ void chk_opt_weak(char *opt_name, bool hw_exists, bool opt_ena)
 		panic("Disable %s, hardware NOT present\n", opt_name);
 }
 
-static void arc_chk_core_config(void)
+/*
+ * ISA agnostic sanity checks
+ */
+static void arc_chk_core_config(struct cpuinfo_arc *info)
 {
-	struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
-	int present = 0;
-
-	if (!cpu->extn.timer0)
+	if (!info->t0)
 		panic("Timer0 is not present!\n");
 
-	if (!cpu->extn.timer1)
+	if (!info->t1)
 		panic("Timer1 is not present!\n");
 
 #ifdef CONFIG_ARC_HAS_DCCM
 	/*
 	 * DCCM can be arbit placed in hardware.
-	 * Make sure it's placement/sz matches what Linux is built with
+	 * Make sure its placement/sz matches what Linux is built with
 	 */
-	if ((unsigned int)__arc_dccm_base != cpu->dccm.base_addr)
+	if ((unsigned int)__arc_dccm_base != info->dccm.base)
 		panic("Linux built with incorrect DCCM Base address\n");
 
-	if (CONFIG_ARC_DCCM_SZ * SZ_1K != cpu->dccm.sz)
+	if (CONFIG_ARC_DCCM_SZ * SZ_1K != info->dccm.sz)
 		panic("Linux built with incorrect DCCM Size\n");
 #endif
 
 #ifdef CONFIG_ARC_HAS_ICCM
-	if (CONFIG_ARC_ICCM_SZ * SZ_1K != cpu->iccm.sz)
+	if (CONFIG_ARC_ICCM_SZ * SZ_1K != info->iccm.sz)
 		panic("Linux built with incorrect ICCM Size\n");
 #endif
-
-	/*
-	 * FP hardware/software config sanity
-	 * -If hardware present, kernel needs to save/restore FPU state
-	 * -If not, it will crash trying to save/restore the non-existant regs
-	 */
-
-	if (is_isa_arcompact()) {
-		/* only DPDP checked since SP has no arch visible regs */
-		present = cpu->extn.fpu_dp;
-		CHK_OPT_STRICT(CONFIG_ARC_FPU_SAVE_RESTORE, present);
-	} else {
-		/* Accumulator Low:High pair (r58:59) present if DSP MPY or FPU */
-		present = cpu->extn_mpy.dsp | cpu->extn.fpu_sp | cpu->extn.fpu_dp;
-		CHK_OPT_STRICT(CONFIG_ARC_HAS_ACCL_REGS, present);
-
-		dsp_config_check();
-	}
 }
 
 /*
@@ -456,21 +413,19 @@ static void arc_chk_core_config(void)
 
 void setup_processor(void)
 {
+	struct cpuinfo_arc info;
+	int c = smp_processor_id();
 	char str[512];
-	int cpu_id = smp_processor_id();
 
-	read_arc_build_cfg_regs();
-	arc_init_IRQ();
+	pr_info("%s", arc_cpu_mumbojumbo(c, &info, str, sizeof(str)));
+	pr_info("%s", arc_platform_smp_cpuinfo());
 
-	pr_info("%s", arc_cpu_mumbojumbo(cpu_id, str, sizeof(str)));
+	arc_chk_core_config(&info);
 
+	arc_init_IRQ();
 	arc_mmu_init();
 	arc_cache_init();
 
-	pr_info("%s", arc_extn_mumbojumbo(cpu_id, str, sizeof(str)));
-	pr_info("%s", arc_platform_smp_cpuinfo());
-
-	arc_chk_core_config();
 }
 
 static inline bool uboot_arg_invalid(unsigned long addr)
@@ -617,6 +572,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	char *str;
 	int cpu_id = ptr_to_cpu(v);
 	struct device *cpu_dev = get_cpu_device(cpu_id);
+	struct cpuinfo_arc info;
 	struct clk *cpu_clk;
 	unsigned long freq = 0;
 
@@ -629,7 +585,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	if (!str)
 		goto done;
 
-	seq_printf(m, arc_cpu_mumbojumbo(cpu_id, str, PAGE_SIZE));
+	seq_printf(m, arc_cpu_mumbojumbo(cpu_id, &info, str, PAGE_SIZE));
 
 	cpu_clk = clk_get(cpu_dev, NULL);
 	if (IS_ERR(cpu_clk)) {
@@ -646,9 +602,6 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		   loops_per_jiffy / (500000 / HZ),
 		   (loops_per_jiffy / (5000 / HZ)) % 100);
 
-	seq_printf(m, arc_mmu_mumbojumbo(cpu_id, str, PAGE_SIZE));
-	seq_printf(m, arc_cache_mumbojumbo(cpu_id, str, PAGE_SIZE));
-	seq_printf(m, arc_extn_mumbojumbo(cpu_id, str, PAGE_SIZE));
 	seq_printf(m, arc_platform_smp_cpuinfo());
 
 	free_page((unsigned long)str);
diff --git a/arch/arc/kernel/signal.c b/arch/arc/kernel/signal.c
index cb2f88502baf..fefa705a8638 100644
--- a/arch/arc/kernel/signal.c
+++ b/arch/arc/kernel/signal.c
@@ -8,15 +8,16 @@
  *
  * vineetg: Nov 2009 (Everything needed for TIF_RESTORE_SIGMASK)
  *  -do_signal() supports TIF_RESTORE_SIGMASK
- *  -do_signal() no loner needs oldset, required by OLD sys_sigsuspend
- *  -sys_rt_sigsuspend() now comes from generic code, so discard arch implemen
+ *  -do_signal() no longer needs oldset, required by OLD sys_sigsuspend
+ *  -sys_rt_sigsuspend() now comes from generic code, so discard arch
+ *   implementation
  *  -sys_sigsuspend() no longer needs to fudge ptregs, hence that arg removed
  *  -sys_sigsuspend() no longer loops for do_signal(), sets TIF_xxx and leaves
  *   the job to do_signal()
  *
  * vineetg: July 2009
  *  -Modified Code to support the uClibc provided userland sigreturn stub
- *   to avoid kernel synthesing it on user stack at runtime, costing TLB
+ *   to avoid kernel synthesizing it on user stack at runtime, costing TLB
  *   probes and Cache line flushes.
  *
  * vineetg: July 2009
@@ -49,10 +50,11 @@
 #include <linux/personality.h>
 #include <linux/uaccess.h>
 #include <linux/syscalls.h>
-#include <linux/tracehook.h>
+#include <linux/resume_user_mode.h>
 #include <linux/sched/task_stack.h>
 
 #include <asm/ucontext.h>
+#include <asm/entry.h>
 
 struct rt_sigframe {
 	struct siginfo info;
@@ -61,7 +63,7 @@ struct rt_sigframe {
 	unsigned int sigret_magic;
 };
 
-static int save_arcv2_regs(struct sigcontext *mctx, struct pt_regs *regs)
+static int save_arcv2_regs(struct sigcontext __user *mctx, struct pt_regs *regs)
 {
 	int err = 0;
 #ifndef CONFIG_ISA_ARCOMPACT
@@ -74,12 +76,12 @@ static int save_arcv2_regs(struct sigcontext *mctx, struct pt_regs *regs)
 #else
 	v2abi.r58 = v2abi.r59 = 0;
 #endif
-	err = __copy_to_user(&mctx->v2abi, &v2abi, sizeof(v2abi));
+	err = __copy_to_user(&mctx->v2abi, (void const *)&v2abi, sizeof(v2abi));
 #endif
 	return err;
 }
 
-static int restore_arcv2_regs(struct sigcontext *mctx, struct pt_regs *regs)
+static int restore_arcv2_regs(struct sigcontext __user *mctx, struct pt_regs *regs)
 {
 	int err = 0;
 #ifndef CONFIG_ISA_ARCOMPACT
@@ -319,7 +321,7 @@ setup_rt_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs)
 	regs->ret = (unsigned long)ksig->ka.sa.sa_handler;
 
 	/*
-	 * handler returns using sigreturn stub provided already by userpsace
+	 * handler returns using sigreturn stub provided already by userspace
 	 * If not, nuke the process right away
 	 */
 	if(!(ksig->ka.sa.sa_flags & SA_RESTORER))
@@ -438,5 +440,5 @@ void do_notify_resume(struct pt_regs *regs)
 	 * user mode
 	 */
 	if (test_thread_flag(TIF_NOTIFY_RESUME))
-		tracehook_notify_resume(regs);
+		resume_user_mode_work(regs);
 }
diff --git a/arch/arc/kernel/smp.c b/arch/arc/kernel/smp.c
index 78e6d069b1c1..b2f2c59279a6 100644
--- a/arch/arc/kernel/smp.c
+++ b/arch/arc/kernel/smp.c
@@ -23,9 +23,10 @@
 #include <linux/export.h>
 #include <linux/of_fdt.h>
 
-#include <asm/processor.h>
-#include <asm/setup.h>
 #include <asm/mach_desc.h>
+#include <asm/setup.h>
+#include <asm/smp.h>
+#include <asm/processor.h>
 
 #ifndef CONFIG_ARC_HAS_LLSC
 arch_spinlock_t smp_atomic_ops_lock = __ARCH_SPIN_LOCK_UNLOCKED;
@@ -35,14 +36,9 @@ EXPORT_SYMBOL_GPL(smp_atomic_ops_lock);
 
 struct plat_smp_ops  __weak plat_smp_ops;
 
-/* XXX: per cpu ? Only needed once in early seconday boot */
+/* XXX: per cpu ? Only needed once in early secondary boot */
 struct task_struct *secondary_idle_tsk;
 
-/* Called from start_kernel */
-void __init smp_prepare_boot_cpu(void)
-{
-}
-
 static int __init arc_get_cpu_map(const char *name, struct cpumask *cpumask)
 {
 	unsigned long dt_root = of_get_flat_dt_root();
@@ -232,14 +228,6 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle)
 	return 0;
 }
 
-/*
- * not supported here
- */
-int setup_profiling_timer(unsigned int multiplier)
-{
-	return -EINVAL;
-}
-
 /*****************************************************************************/
 /*              Inter Processor Interrupt Handling                           */
 /*****************************************************************************/
@@ -274,7 +262,7 @@ static void ipi_send_msg_one(int cpu, enum ipi_msg_type msg)
 	 * and read back old value
 	 */
 	do {
-		new = old = READ_ONCE(*ipi_data_ptr);
+		new = old = *ipi_data_ptr;
 		new |= 1U << msg;
 	} while (cmpxchg(ipi_data_ptr, old, new) != old);
 
@@ -300,7 +288,7 @@ static void ipi_send_msg(const struct cpumask *callmap, enum ipi_msg_type msg)
 		ipi_send_msg_one(cpu, msg);
 }
 
-void smp_send_reschedule(int cpu)
+void arch_smp_send_reschedule(int cpu)
 {
 	ipi_send_msg_one(cpu, IPI_RESCHEDULE);
 }
@@ -359,7 +347,7 @@ static inline int __do_IPI(unsigned long msg)
  * arch-common ISR to handle for inter-processor interrupts
  * Has hooks for platform specific IPI
  */
-irqreturn_t do_IPI(int irq, void *dev_id)
+static irqreturn_t do_IPI(int irq, void *dev_id)
 {
 	unsigned long pending;
 	unsigned long __maybe_unused copy;
@@ -393,7 +381,7 @@ irqreturn_t do_IPI(int irq, void *dev_id)
  * API called by platform code to hookup arch-common ISR to their IPI IRQ
  *
  * Note: If IPI is provided by platform (vs. say ARC MCIP), their intc setup/map
- * function needs to call call irq_set_percpu_devid() for IPI IRQ, otherwise
+ * function needs to call irq_set_percpu_devid() for IPI IRQ, otherwise
  * request_percpu_irq() below will fail
  */
 static DEFINE_PER_CPU(int, ipi_dev);
diff --git a/arch/arc/kernel/stacktrace.c b/arch/arc/kernel/stacktrace.c
index c376ff3147e7..ea99c066ef25 100644
--- a/arch/arc/kernel/stacktrace.c
+++ b/arch/arc/kernel/stacktrace.c
@@ -15,7 +15,7 @@
  *      = specifics of data structs where trace is saved(CONFIG_STACKTRACE etc)
  *
  *  vineetg: March 2009
- *  -Implemented correct versions of thread_saved_pc() and get_wchan()
+ *  -Implemented correct versions of thread_saved_pc() and __get_wchan()
  *
  *  rajeshwarr: 2008
  *  -Initial implementation
@@ -29,6 +29,7 @@
 
 #include <asm/arcregs.h>
 #include <asm/unwind.h>
+#include <asm/stacktrace.h>
 #include <asm/switch_to.h>
 
 /*-------------------------------------------------------------------------
@@ -248,7 +249,7 @@ void show_stack(struct task_struct *tsk, unsigned long *sp, const char *loglvl)
  * Of course just returning schedule( ) would be pointless so unwind until
  * the function is not in schedular code
  */
-unsigned int get_wchan(struct task_struct *tsk)
+unsigned int __get_wchan(struct task_struct *tsk)
 {
 	return arc_unwind_core(tsk, NULL, __get_first_nonsched, NULL);
 }
diff --git a/arch/arc/kernel/sys.c b/arch/arc/kernel/sys.c
index 1069446bdc58..36a2a95c083b 100644
--- a/arch/arc/kernel/sys.c
+++ b/arch/arc/kernel/sys.c
@@ -8,11 +8,12 @@
 
 #define sys_clone	sys_clone_wrapper
 #define sys_clone3	sys_clone3_wrapper
+#define sys_mmap2	sys_mmap_pgoff
 
-#undef __SYSCALL
 #define __SYSCALL(nr, call) [nr] = (call),
+#define __SYSCALL_WITH_COMPAT(nr, native, compat)  __SYSCALL(nr, native)
 
 void *sys_call_table[NR_syscalls] = {
 	[0 ... NR_syscalls-1] = sys_ni_syscall,
-#include <asm/unistd.h>
+#include <asm/syscall_table_32.h>
 };
diff --git a/arch/arc/kernel/traps.c b/arch/arc/kernel/traps.c
index 6b83e3f2b41c..8d2ea2cbd98b 100644
--- a/arch/arc/kernel/traps.c
+++ b/arch/arc/kernel/traps.c
@@ -16,9 +16,11 @@
 #include <linux/ptrace.h>
 #include <linux/kprobes.h>
 #include <linux/kgdb.h>
+#include <asm/entry.h>
 #include <asm/setup.h>
-#include <asm/unaligned.h>
+#include <linux/unaligned.h>
 #include <asm/kprobes.h>
+#include "unaligned.h"
 
 void die(const char *str, struct pt_regs *regs, unsigned long address)
 {
@@ -88,7 +90,7 @@ int do_misaligned_access(unsigned long address, struct pt_regs *regs,
 
 /*
  * Entry point for miscll errors such as Nested Exceptions
- *  -Duplicate TLB entry is handled seperately though
+ *  -Duplicate TLB entry is handled separately though
  */
 void do_machine_check_fault(unsigned long address, struct pt_regs *regs)
 {
@@ -109,9 +111,7 @@ void do_machine_check_fault(unsigned long address, struct pt_regs *regs)
  */
 void do_non_swi_trap(unsigned long address, struct pt_regs *regs)
 {
-	unsigned int param = regs->ecr_param;
-
-	switch (param) {
+	switch (regs->ecr.param) {
 	case 1:
 		trap_is_brkpt(address, regs);
 		break;
diff --git a/arch/arc/kernel/troubleshoot.c b/arch/arc/kernel/troubleshoot.c
index 7654c2e42dc0..c380d8c30704 100644
--- a/arch/arc/kernel/troubleshoot.c
+++ b/arch/arc/kernel/troubleshoot.c
@@ -90,10 +90,12 @@ static void show_faulting_vma(unsigned long address)
 	 */
 	if (vma) {
 		char buf[ARC_PATH_MAX];
-		char *nm = "?";
+		char *nm = "anon";
 
 		if (vma->vm_file) {
-			nm = file_path(vma->vm_file, buf, ARC_PATH_MAX-1);
+			/* XXX: can we use %pD below and get rid of buf? */
+			nm = d_path(file_user_path(vma->vm_file), buf,
+				    ARC_PATH_MAX-1);
 			if (IS_ERR(nm))
 				nm = "?";
 		}
@@ -115,8 +117,8 @@ static void show_ecr_verbose(struct pt_regs *regs)
 	/* For Data fault, this is data address not instruction addr */
 	address = current->thread.fault_address;
 
-	vec = regs->ecr_vec;
-	cause_code = regs->ecr_cause;
+	vec = regs->ecr.vec;
+	cause_code = regs->ecr.cause;
 
 	/* For DTLB Miss or ProtV, display the memory involved too */
 	if (vec == ECR_V_DTLB_MISS) {
@@ -154,7 +156,7 @@ static void show_ecr_verbose(struct pt_regs *regs)
 		pr_cont("Misaligned r/w from 0x%08lx\n", address);
 #endif
 	} else if (vec == ECR_V_TRAP) {
-		if (regs->ecr_param == 5)
+		if (regs->ecr.param == 5)
 			pr_cont("gcc generated __builtin_trap\n");
 	} else {
 		pr_cont("Check Programmer's Manual\n");
@@ -184,9 +186,10 @@ void show_regs(struct pt_regs *regs)
 	if (user_mode(regs))
 		show_faulting_vma(regs->ret); /* faulting code, not data */
 
-	pr_info("ECR: 0x%08lx EFA: 0x%08lx ERET: 0x%08lx\nSTAT: 0x%08lx",
-		regs->event, current->thread.fault_address, regs->ret,
-		regs->status32);
+	pr_info("ECR: 0x%08lx EFA: 0x%08lx ERET: 0x%08lx\n",
+		regs->ecr.full, current->thread.fault_address, regs->ret);
+
+	pr_info("STAT32: 0x%08lx", regs->status32);
 
 #define STS_BIT(r, bit)	r->status32 & STATUS_##bit##_MASK ? #bit" " : ""
 
diff --git a/arch/arc/kernel/unaligned.c b/arch/arc/kernel/unaligned.c
index d63ebd81f1c6..3b2d8b1bd271 100644
--- a/arch/arc/kernel/unaligned.c
+++ b/arch/arc/kernel/unaligned.c
@@ -12,6 +12,7 @@
 #include <linux/ptrace.h>
 #include <linux/uaccess.h>
 #include <asm/disasm.h>
+#include "unaligned.h"
 
 #ifdef CONFIG_CPU_BIG_ENDIAN
 #define BE		1
@@ -199,7 +200,6 @@ int misaligned_fixup(unsigned long address, struct pt_regs *regs,
 		     struct callee_regs *cregs)
 {
 	struct disasm_state state;
-	char buf[TASK_COMM_LEN];
 
 	/* handle user mode only and only if enabled by sysadmin */
 	if (!user_mode(regs) || !unaligned_enabled)
@@ -211,11 +211,11 @@ int misaligned_fixup(unsigned long address, struct pt_regs *regs,
 			     " performance significantly\n. To enable further"
 			     " logging of such instances, please \n"
 			     " echo 0 > /proc/sys/kernel/ignore-unaligned-usertrap\n",
-			     get_task_comm(buf, current), task_pid_nr(current));
+			     current->comm, task_pid_nr(current));
 	} else {
 		/* Add rate limiting if it gets down to it */
 		pr_warn("%s(%d): unaligned access to/from 0x%lx by PC: 0x%lx\n",
-			get_task_comm(buf, current), task_pid_nr(current),
+			current->comm, task_pid_nr(current),
 			address, regs->ret);
 
 	}
@@ -237,7 +237,7 @@ int misaligned_fixup(unsigned long address, struct pt_regs *regs,
 	if (state.fault)
 		goto fault;
 
-	/* clear any remanants of delay slot */
+	/* clear any remnants of delay slot */
 	if (delay_mode(regs)) {
 		regs->ret = regs->bta & ~1U;
 		regs->status32 &= ~STATUS_DE_MASK;
diff --git a/arch/arc/kernel/unaligned.h b/arch/arc/kernel/unaligned.h
new file mode 100644
index 000000000000..5244453bb85f
--- /dev/null
+++ b/arch/arc/kernel/unaligned.h
@@ -0,0 +1,16 @@
+struct pt_regs;
+struct callee_regs;
+
+#ifdef CONFIG_ARC_EMUL_UNALIGNED
+int misaligned_fixup(unsigned long address, struct pt_regs *regs,
+		     struct callee_regs *cregs);
+#else
+static inline int
+misaligned_fixup(unsigned long address, struct pt_regs *regs,
+		 struct callee_regs *cregs)
+{
+	/* Not fixed */
+	return 1;
+}
+#endif
+
diff --git a/arch/arc/kernel/unwind.c b/arch/arc/kernel/unwind.c
index 9e28058cdba8..789cfb9ea14e 100644
--- a/arch/arc/kernel/unwind.c
+++ b/arch/arc/kernel/unwind.c
@@ -19,7 +19,7 @@
 #include <linux/uaccess.h>
 #include <linux/ptrace.h>
 #include <asm/sections.h>
-#include <asm/unaligned.h>
+#include <linux/unaligned.h>
 #include <asm/unwind.h>
 
 extern char __start_unwind[], __end_unwind[];
@@ -241,20 +241,6 @@ static int cmp_eh_frame_hdr_table_entries(const void *p1, const void *p2)
 	return (e1->start > e2->start) - (e1->start < e2->start);
 }
 
-static void swap_eh_frame_hdr_table_entries(void *p1, void *p2, int size)
-{
-	struct eh_frame_hdr_table_entry *e1 = p1;
-	struct eh_frame_hdr_table_entry *e2 = p2;
-	unsigned long v;
-
-	v = e1->start;
-	e1->start = e2->start;
-	e2->start = v;
-	v = e1->fde;
-	e1->fde = e2->fde;
-	e2->fde = v;
-}
-
 static void init_unwind_hdr(struct unwind_table *table,
 			    void *(*alloc) (unsigned long))
 {
@@ -350,7 +336,7 @@ static void init_unwind_hdr(struct unwind_table *table,
 	sort(header->table,
 	     n,
 	     sizeof(*header->table),
-	     cmp_eh_frame_hdr_table_entries, swap_eh_frame_hdr_table_entries);
+	     cmp_eh_frame_hdr_table_entries, NULL);
 
 	table->hdrsz = hdrSize;
 	smp_wmb();
@@ -374,6 +360,8 @@ void *unwind_add_table(struct module *module, const void *table_start,
 		       unsigned long table_size)
 {
 	struct unwind_table *table;
+	struct module_memory *core_text;
+	struct module_memory *init_text;
 
 	if (table_size <= 0)
 		return NULL;
@@ -382,11 +370,11 @@ void *unwind_add_table(struct module *module, const void *table_start,
 	if (!table)
 		return NULL;
 
-	init_unwind_table(table, module->name,
-			  module->core_layout.base, module->core_layout.size,
-			  module->init_layout.base, module->init_layout.size,
-			  table_start, table_size,
-			  NULL, 0);
+	core_text = &module->mem[MOD_TEXT];
+	init_text = &module->mem[MOD_INIT_TEXT];
+
+	init_unwind_table(table, module->name, core_text->base, core_text->size,
+			  init_text->base, init_text->size, table_start, table_size, NULL, 0);
 
 	init_unwind_hdr(table, unw_hdr_alloc);
 
diff --git a/arch/arc/kernel/vmlinux.lds.S b/arch/arc/kernel/vmlinux.lds.S
index 529ae50f9fe2..61a1b2b96e1d 100644
--- a/arch/arc/kernel/vmlinux.lds.S
+++ b/arch/arc/kernel/vmlinux.lds.S
@@ -41,8 +41,8 @@ SECTIONS
 #endif
 
 	/*
-	 * The reason for having a seperate subsection .init.ramfs is to
-	 * prevent objump from including it in kernel dumps
+	 * The reason for having a separate subsection .init.ramfs is to
+	 * prevent objdump from including it in kernel dumps
 	 *
 	 * Reason for having .init.ramfs above .init is to make sure that the
 	 * binary blob is tucked away to one side, reducing the displacement
@@ -85,7 +85,6 @@ SECTIONS
 		_stext = .;
 		TEXT_TEXT
 		SCHED_TEXT
-		CPUIDLE_TEXT
 		LOCK_TEXT
 		KPROBES_TEXT
 		IRQENTRY_TEXT
diff --git a/arch/arc/lib/memset-archs.S b/arch/arc/lib/memset-archs.S
index d2e09fece5bc..d0a5cec4cdca 100644
--- a/arch/arc/lib/memset-archs.S
+++ b/arch/arc/lib/memset-archs.S
@@ -36,12 +36,13 @@
 #endif
 
 ENTRY_CFI(memset)
-	PREFETCHW_INSTR	r0, 0	; Prefetch the first write location
 	mov.f	0, r2
 ;;; if size is zero
 	jz.d	[blink]
 	mov	r3, r0		; don't clobber ret val
 
+	PREFETCHW_INSTR	r0, 0	; Prefetch the first write location
+
 ;;; if length < 8
 	brls.d.nt	r2, 8, .Lsmallchunk
 	mov.f	lp_count,r2
diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c
index 8aa1231865d1..7d2f93dc1e91 100644
--- a/arch/arc/mm/cache.c
+++ b/arch/arc/mm/cache.c
@@ -28,6 +28,10 @@ int slc_enable = 1, ioc_enable = 1;
 unsigned long perip_base = ARC_UNCACHED_ADDR_SPACE; /* legacy value for boot */
 unsigned long perip_end = 0xFFFFFFFF; /* legacy value */
 
+static struct cpuinfo_arc_cache {
+	unsigned int sz_k, line_len, colors;
+} ic_info, dc_info, slc_info;
+
 void (*_cache_line_loop_ic_fn)(phys_addr_t paddr, unsigned long vaddr,
 			       unsigned long sz, const int op, const int full_page);
 
@@ -35,78 +39,24 @@ void (*__dma_cache_wback_inv)(phys_addr_t start, unsigned long sz);
 void (*__dma_cache_inv)(phys_addr_t start, unsigned long sz);
 void (*__dma_cache_wback)(phys_addr_t start, unsigned long sz);
 
-char *arc_cache_mumbojumbo(int c, char *buf, int len)
-{
-	int n = 0;
-	struct cpuinfo_arc_cache *p;
-
-#define PR_CACHE(p, cfg, str)						\
-	if (!(p)->line_len)						\
-		n += scnprintf(buf + n, len - n, str"\t\t: N/A\n");	\
-	else								\
-		n += scnprintf(buf + n, len - n,			\
-			str"\t\t: %uK, %dway/set, %uB Line, %s%s%s\n",	\
-			(p)->sz_k, (p)->assoc, (p)->line_len,		\
-			(p)->vipt ? "VIPT" : "PIPT",			\
-			(p)->alias ? " aliasing" : "",			\
-			IS_USED_CFG(cfg));
-
-	PR_CACHE(&cpuinfo_arc700[c].icache, CONFIG_ARC_HAS_ICACHE, "I-Cache");
-	PR_CACHE(&cpuinfo_arc700[c].dcache, CONFIG_ARC_HAS_DCACHE, "D-Cache");
-
-	p = &cpuinfo_arc700[c].slc;
-	if (p->line_len)
-		n += scnprintf(buf + n, len - n,
-			       "SLC\t\t: %uK, %uB Line%s\n",
-			       p->sz_k, p->line_len, IS_USED_RUN(slc_enable));
-
-	n += scnprintf(buf + n, len - n, "Peripherals\t: %#lx%s%s\n",
-		       perip_base,
-		       IS_AVAIL3(ioc_exists, ioc_enable, ", IO-Coherency (per-device) "));
-
-	return buf;
-}
-
-/*
- * Read the Cache Build Confuration Registers, Decode them and save into
- * the cpuinfo structure for later use.
- * No Validation done here, simply read/convert the BCRs
- */
-static void read_decode_cache_bcr_arcv2(int cpu)
+static int read_decode_cache_bcr_arcv2(int c, char *buf, int len)
 {
-	struct cpuinfo_arc_cache *p_slc = &cpuinfo_arc700[cpu].slc;
+	struct cpuinfo_arc_cache *p_slc = &slc_info;
+	struct bcr_identity ident;
 	struct bcr_generic sbcr;
-
-	struct bcr_slc_cfg {
-#ifdef CONFIG_CPU_BIG_ENDIAN
-		unsigned int pad:24, way:2, lsz:2, sz:4;
-#else
-		unsigned int sz:4, lsz:2, way:2, pad:24;
-#endif
-	} slc_cfg;
-
-	struct bcr_clust_cfg {
-#ifdef CONFIG_CPU_BIG_ENDIAN
-		unsigned int pad:7, c:1, num_entries:8, num_cores:8, ver:8;
-#else
-		unsigned int ver:8, num_cores:8, num_entries:8, c:1, pad:7;
-#endif
-	} cbcr;
-
-	struct bcr_volatile {
-#ifdef CONFIG_CPU_BIG_ENDIAN
-		unsigned int start:4, limit:4, pad:22, order:1, disable:1;
-#else
-		unsigned int disable:1, order:1, pad:22, limit:4, start:4;
-#endif
-	} vol;
-
+	struct bcr_clust_cfg cbcr;
+	struct bcr_volatile vol;
+	int n = 0;
 
 	READ_BCR(ARC_REG_SLC_BCR, sbcr);
 	if (sbcr.ver) {
+		struct bcr_slc_cfg  slc_cfg;
 		READ_BCR(ARC_REG_SLC_CFG, slc_cfg);
 		p_slc->sz_k = 128 << slc_cfg.sz;
 		l2_line_sz = p_slc->line_len = (slc_cfg.lsz == 0) ? 128 : 64;
+		n += scnprintf(buf + n, len - n,
+			       "SLC\t\t: %uK, %uB Line%s\n",
+			       p_slc->sz_k, p_slc->line_len, IS_USED_RUN(slc_enable));
 	}
 
 	READ_BCR(ARC_REG_CLUSTER_BCR, cbcr);
@@ -129,70 +79,82 @@ static void read_decode_cache_bcr_arcv2(int cpu)
 		ioc_enable = 0;
 	}
 
+	READ_BCR(AUX_IDENTITY, ident);
+
 	/* HS 2.0 didn't have AUX_VOL */
-	if (cpuinfo_arc700[cpu].core.family > 0x51) {
+	if (ident.family > 0x51) {
 		READ_BCR(AUX_VOL, vol);
 		perip_base = vol.start << 28;
 		/* HS 3.0 has limit and strict-ordering fields */
-		if (cpuinfo_arc700[cpu].core.family > 0x52)
+		if (ident.family > 0x52)
 			perip_end = (vol.limit << 28) - 1;
 	}
+
+	n += scnprintf(buf + n, len - n, "Peripherals\t: %#lx%s%s\n",
+		       perip_base,
+		       IS_AVAIL3(ioc_exists, ioc_enable, ", IO-Coherency (per-device) "));
+
+	return n;
 }
 
-void read_decode_cache_bcr(void)
+int arc_cache_mumbojumbo(int c, char *buf, int len)
 {
-	struct cpuinfo_arc_cache *p_ic, *p_dc;
-	unsigned int cpu = smp_processor_id();
-	struct bcr_cache {
-#ifdef CONFIG_CPU_BIG_ENDIAN
-		unsigned int pad:12, line_len:4, sz:4, config:4, ver:8;
-#else
-		unsigned int ver:8, config:4, sz:4, line_len:4, pad:12;
-#endif
-	} ibcr, dbcr;
+	struct cpuinfo_arc_cache *p_ic = &ic_info, *p_dc = &dc_info;
+	struct bcr_cache ibcr, dbcr;
+	int vipt, assoc;
+	int n = 0;
 
-	p_ic = &cpuinfo_arc700[cpu].icache;
 	READ_BCR(ARC_REG_IC_BCR, ibcr);
-
 	if (!ibcr.ver)
 		goto dc_chk;
 
-	if (ibcr.ver <= 3) {
+	if (is_isa_arcompact() && (ibcr.ver <= 3)) {
 		BUG_ON(ibcr.config != 3);
-		p_ic->assoc = 2;		/* Fixed to 2w set assoc */
-	} else if (ibcr.ver >= 4) {
-		p_ic->assoc = 1 << ibcr.config;	/* 1,2,4,8 */
+		assoc = 2;		/* Fixed to 2w set assoc */
+	} else if (is_isa_arcv2() && (ibcr.ver >= 4)) {
+		assoc = 1 << ibcr.config;	/* 1,2,4,8 */
 	}
 
 	p_ic->line_len = 8 << ibcr.line_len;
 	p_ic->sz_k = 1 << (ibcr.sz - 1);
-	p_ic->vipt = 1;
-	p_ic->alias = p_ic->sz_k/p_ic->assoc/TO_KB(PAGE_SIZE) > 1;
+	p_ic->colors = p_ic->sz_k/assoc/TO_KB(PAGE_SIZE);
+
+	n += scnprintf(buf + n, len - n,
+			"I-Cache\t\t: %uK, %dway/set, %uB Line, VIPT%s%s\n",
+			p_ic->sz_k, assoc, p_ic->line_len,
+			p_ic->colors > 1 ? " aliasing" : "",
+			IS_USED_CFG(CONFIG_ARC_HAS_ICACHE));
 
 dc_chk:
-	p_dc = &cpuinfo_arc700[cpu].dcache;
 	READ_BCR(ARC_REG_DC_BCR, dbcr);
-
 	if (!dbcr.ver)
 		goto slc_chk;
 
-	if (dbcr.ver <= 3) {
+	if (is_isa_arcompact() && (dbcr.ver <= 3)) {
 		BUG_ON(dbcr.config != 2);
-		p_dc->assoc = 4;		/* Fixed to 4w set assoc */
-		p_dc->vipt = 1;
-		p_dc->alias = p_dc->sz_k/p_dc->assoc/TO_KB(PAGE_SIZE) > 1;
-	} else if (dbcr.ver >= 4) {
-		p_dc->assoc = 1 << dbcr.config;	/* 1,2,4,8 */
-		p_dc->vipt = 0;
-		p_dc->alias = 0;		/* PIPT so can't VIPT alias */
+		vipt = 1;
+		assoc = 4;		/* Fixed to 4w set assoc */
+		p_dc->colors = p_dc->sz_k/assoc/TO_KB(PAGE_SIZE);
+	} else if (is_isa_arcv2() && (dbcr.ver >= 4)) {
+		vipt = 0;
+		assoc = 1 << dbcr.config;	/* 1,2,4,8 */
+		p_dc->colors = 1;		/* PIPT so can't VIPT alias */
 	}
 
 	p_dc->line_len = 16 << dbcr.line_len;
 	p_dc->sz_k = 1 << (dbcr.sz - 1);
 
+	n += scnprintf(buf + n, len - n,
+			"D-Cache\t\t: %uK, %dway/set, %uB Line, %s%s\n",
+			p_dc->sz_k, assoc, p_dc->line_len,
+			vipt ? "VIPT" : "PIPT",
+			IS_USED_CFG(CONFIG_ARC_HAS_DCACHE));
+
 slc_chk:
 	if (is_isa_arcv2())
-                read_decode_cache_bcr_arcv2(cpu);
+		n += read_decode_cache_bcr_arcv2(c, buf + n, len - n);
+
+	return n;
 }
 
 /*
@@ -401,7 +363,7 @@ static inline void __before_dc_op(const int op)
 {
 	if (op == OP_FLUSH_N_INV) {
 		/* Dcache provides 2 cmd: FLUSH or INV
-		 * INV inturn has sub-modes: DISCARD or FLUSH-BEFORE
+		 * INV in turn has sub-modes: DISCARD or FLUSH-BEFORE
 		 * flush-n-inv is achieved by INV cmd but with IM=1
 		 * So toggle INV sub-mode depending on op request and default
 		 */
@@ -581,7 +543,7 @@ static void __ic_line_inv_vaddr(phys_addr_t paddr, unsigned long vaddr,
 
 #endif /* CONFIG_ARC_HAS_ICACHE */
 
-noinline void slc_op_rgn(phys_addr_t paddr, unsigned long sz, const int op)
+static noinline void slc_op_rgn(phys_addr_t paddr, unsigned long sz, const int op)
 {
 #ifdef CONFIG_ISA_ARCV2
 	/*
@@ -644,7 +606,7 @@ noinline void slc_op_rgn(phys_addr_t paddr, unsigned long sz, const int op)
 #endif
 }
 
-noinline void slc_op_line(phys_addr_t paddr, unsigned long sz, const int op)
+static __maybe_unused noinline void slc_op_line(phys_addr_t paddr, unsigned long sz, const int op)
 {
 #ifdef CONFIG_ISA_ARCV2
 	/*
@@ -740,47 +702,16 @@ static inline void arc_slc_enable(void)
  * Exported APIs
  */
 
-/*
- * Handle cache congruency of kernel and userspace mappings of page when kernel
- * writes-to/reads-from
- *
- * The idea is to defer flushing of kernel mapping after a WRITE, possible if:
- *  -dcache is NOT aliasing, hence any U/K-mappings of page are congruent
- *  -U-mapping doesn't exist yet for page (finalised in update_mmu_cache)
- *  -In SMP, if hardware caches are coherent
- *
- * There's a corollary case, where kernel READs from a userspace mapped page.
- * If the U-mapping is not congruent to to K-mapping, former needs flushing.
- */
-void flush_dcache_page(struct page *page)
+void flush_dcache_folio(struct folio *folio)
 {
-	struct address_space *mapping;
-
-	if (!cache_is_vipt_aliasing()) {
-		clear_bit(PG_dc_clean, &page->flags);
-		return;
-	}
-
-	/* don't handle anon pages here */
-	mapping = page_mapping_file(page);
-	if (!mapping)
-		return;
-
-	/*
-	 * pagecache page, file not yet mapped to userspace
-	 * Make a note that K-mapping is dirty
-	 */
-	if (!mapping_mapped(mapping)) {
-		clear_bit(PG_dc_clean, &page->flags);
-	} else if (page_mapcount(page)) {
-
-		/* kernel reading from page with U-mapping */
-		phys_addr_t paddr = (unsigned long)page_address(page);
-		unsigned long vaddr = page->index << PAGE_SHIFT;
+	clear_bit(PG_dc_clean, &folio->flags.f);
+	return;
+}
+EXPORT_SYMBOL(flush_dcache_folio);
 
-		if (addr_not_cache_congruent(paddr, vaddr))
-			__flush_dcache_page(paddr, vaddr);
-	}
+void flush_dcache_page(struct page *page)
+{
+	return flush_dcache_folio(page_folio(page));
 }
 EXPORT_SYMBOL(flush_dcache_page);
 
@@ -910,7 +841,7 @@ EXPORT_SYMBOL(flush_icache_range);
  * @vaddr is typically user vaddr (breakpoint) or kernel vaddr (vmalloc)
  *    However in one instance, when called by kprobe (for a breakpt in
  *    builtin kernel code) @vaddr will be paddr only, meaning CDU operation will
- *    use a paddr to index the cache (despite VIPT). This is fine since since a
+ *    use a paddr to index the cache (despite VIPT). This is fine since a
  *    builtin kernel page will not have any virtual mappings.
  *    kprobe on loadable module will be kernel vaddr.
  */
@@ -921,18 +852,18 @@ void __sync_icache_dcache(phys_addr_t paddr, unsigned long vaddr, int len)
 }
 
 /* wrapper to compile time eliminate alignment checks in flush loop */
-void __inv_icache_page(phys_addr_t paddr, unsigned long vaddr)
+void __inv_icache_pages(phys_addr_t paddr, unsigned long vaddr, unsigned nr)
 {
-	__ic_line_inv_vaddr(paddr, vaddr, PAGE_SIZE);
+	__ic_line_inv_vaddr(paddr, vaddr, nr * PAGE_SIZE);
 }
 
 /*
  * wrapper to clearout kernel or userspace mappings of a page
  * For kernel mappings @vaddr == @paddr
  */
-void __flush_dcache_page(phys_addr_t paddr, unsigned long vaddr)
+void __flush_dcache_pages(phys_addr_t paddr, unsigned long vaddr, unsigned nr)
 {
-	__dc_line_op(paddr, vaddr & PAGE_MASK, PAGE_SIZE, OP_FLUSH_N_INV);
+	__dc_line_op(paddr, vaddr & PAGE_MASK, nr * PAGE_SIZE, OP_FLUSH_N_INV);
 }
 
 noinline void flush_cache_all(void)
@@ -948,89 +879,18 @@ noinline void flush_cache_all(void)
 
 }
 
-#ifdef CONFIG_ARC_CACHE_VIPT_ALIASING
-
-void flush_cache_mm(struct mm_struct *mm)
-{
-	flush_cache_all();
-}
-
-void flush_cache_page(struct vm_area_struct *vma, unsigned long u_vaddr,
-		      unsigned long pfn)
-{
-	phys_addr_t paddr = pfn << PAGE_SHIFT;
-
-	u_vaddr &= PAGE_MASK;
-
-	__flush_dcache_page(paddr, u_vaddr);
-
-	if (vma->vm_flags & VM_EXEC)
-		__inv_icache_page(paddr, u_vaddr);
-}
-
-void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
-		       unsigned long end)
-{
-	flush_cache_all();
-}
-
-void flush_anon_page(struct vm_area_struct *vma, struct page *page,
-		     unsigned long u_vaddr)
-{
-	/* TBD: do we really need to clear the kernel mapping */
-	__flush_dcache_page((phys_addr_t)page_address(page), u_vaddr);
-	__flush_dcache_page((phys_addr_t)page_address(page),
-			    (phys_addr_t)page_address(page));
-
-}
-
-#endif
-
 void copy_user_highpage(struct page *to, struct page *from,
 	unsigned long u_vaddr, struct vm_area_struct *vma)
 {
+	struct folio *src = page_folio(from);
+	struct folio *dst = page_folio(to);
 	void *kfrom = kmap_atomic(from);
 	void *kto = kmap_atomic(to);
-	int clean_src_k_mappings = 0;
-
-	/*
-	 * If SRC page was already mapped in userspace AND it's U-mapping is
-	 * not congruent with K-mapping, sync former to physical page so that
-	 * K-mapping in memcpy below, sees the right data
-	 *
-	 * Note that while @u_vaddr refers to DST page's userspace vaddr, it is
-	 * equally valid for SRC page as well
-	 *
-	 * For !VIPT cache, all of this gets compiled out as
-	 * addr_not_cache_congruent() is 0
-	 */
-	if (page_mapcount(from) && addr_not_cache_congruent(kfrom, u_vaddr)) {
-		__flush_dcache_page((unsigned long)kfrom, u_vaddr);
-		clean_src_k_mappings = 1;
-	}
 
 	copy_page(kto, kfrom);
 
-	/*
-	 * Mark DST page K-mapping as dirty for a later finalization by
-	 * update_mmu_cache(). Although the finalization could have been done
-	 * here as well (given that both vaddr/paddr are available).
-	 * But update_mmu_cache() already has code to do that for other
-	 * non copied user pages (e.g. read faults which wire in pagecache page
-	 * directly).
-	 */
-	clear_bit(PG_dc_clean, &to->flags);
-
-	/*
-	 * if SRC was already usermapped and non-congruent to kernel mapping
-	 * sync the kernel mapping back to physical page
-	 */
-	if (clean_src_k_mappings) {
-		__flush_dcache_page((unsigned long)kfrom, (unsigned long)kfrom);
-		set_bit(PG_dc_clean, &from->flags);
-	} else {
-		clear_bit(PG_dc_clean, &from->flags);
-	}
+	clear_bit(PG_dc_clean, &dst->flags.f);
+	clear_bit(PG_dc_clean, &src->flags.f);
 
 	kunmap_atomic(kto);
 	kunmap_atomic(kfrom);
@@ -1038,8 +898,9 @@ void copy_user_highpage(struct page *to, struct page *from,
 
 void clear_user_page(void *to, unsigned long u_vaddr, struct page *page)
 {
+	struct folio *folio = page_folio(page);
 	clear_page(to);
-	clear_bit(PG_dc_clean, &page->flags);
+	clear_bit(PG_dc_clean, &folio->flags.f);
 }
 EXPORT_SYMBOL(clear_user_page);
 
@@ -1069,7 +930,7 @@ SYSCALL_DEFINE3(cacheflush, uint32_t, start, uint32_t, sz, uint32_t, flags)
  * 3. All Caches need to be disabled when setting up IOC to elide any in-flight
  *    Coherency transactions
  */
-noinline void __init arc_ioc_setup(void)
+static noinline void __init arc_ioc_setup(void)
 {
 	unsigned int ioc_base, mem_sz;
 
@@ -1131,12 +992,10 @@ noinline void __init arc_ioc_setup(void)
  *    one core suffices for all
  *  - IOC setup / dma callbacks only need to be done once
  */
-void __init arc_cache_init_master(void)
+static noinline void __init arc_cache_init_master(void)
 {
-	unsigned int __maybe_unused cpu = smp_processor_id();
-
 	if (IS_ENABLED(CONFIG_ARC_HAS_ICACHE)) {
-		struct cpuinfo_arc_cache *ic = &cpuinfo_arc700[cpu].icache;
+		struct cpuinfo_arc_cache *ic = &ic_info;
 
 		if (!ic->line_len)
 			panic("cache support enabled but non-existent cache\n");
@@ -1149,14 +1008,14 @@ void __init arc_cache_init_master(void)
 		 * In MMU v4 (HS38x) the aliasing icache config uses IVIL/PTAG
 		 * pair to provide vaddr/paddr respectively, just as in MMU v3
 		 */
-		if (is_isa_arcv2() && ic->alias)
+		if (is_isa_arcv2() && ic->colors > 1)
 			_cache_line_loop_ic_fn = __cache_line_loop_v3;
 		else
 			_cache_line_loop_ic_fn = __cache_line_loop;
 	}
 
 	if (IS_ENABLED(CONFIG_ARC_HAS_DCACHE)) {
-		struct cpuinfo_arc_cache *dc = &cpuinfo_arc700[cpu].dcache;
+		struct cpuinfo_arc_cache *dc = &dc_info;
 
 		if (!dc->line_len)
 			panic("cache support enabled but non-existent cache\n");
@@ -1166,18 +1025,8 @@ void __init arc_cache_init_master(void)
 			      dc->line_len, L1_CACHE_BYTES);
 
 		/* check for D-Cache aliasing on ARCompact: ARCv2 has PIPT */
-		if (is_isa_arcompact()) {
-			int handled = IS_ENABLED(CONFIG_ARC_CACHE_VIPT_ALIASING);
-			int num_colors = dc->sz_k/dc->assoc/TO_KB(PAGE_SIZE);
-
-			if (dc->alias) {
-				if (!handled)
-					panic("Enable CONFIG_ARC_CACHE_VIPT_ALIASING\n");
-				if (CACHE_COLORS_NUM != num_colors)
-					panic("CACHE_COLORS_NUM not optimized for config\n");
-			} else if (!dc->alias && handled) {
-				panic("Disable CONFIG_ARC_CACHE_VIPT_ALIASING\n");
-			}
+		if (is_isa_arcompact() && dc->colors > 1) {
+			panic("Aliasing VIPT cache not supported\n");
 		}
 	}
 
@@ -1218,9 +1067,6 @@ void __init arc_cache_init_master(void)
 void __ref arc_cache_init(void)
 {
 	unsigned int __maybe_unused cpu = smp_processor_id();
-	char str[256];
-
-	pr_info("%s", arc_cache_mumbojumbo(0, str, sizeof(str)));
 
 	if (!cpu)
 		arc_cache_init_master();
diff --git a/arch/arc/mm/dma.c b/arch/arc/mm/dma.c
index 517988e60cfc..6b85e94f3275 100644
--- a/arch/arc/mm/dma.c
+++ b/arch/arc/mm/dma.c
@@ -32,7 +32,7 @@ void arch_dma_prep_coherent(struct page *page, size_t size)
 
 /*
  * Cache operations depending on function and direction argument, inspired by
- * https://lkml.org/lkml/2018/5/18/979
+ * https://lore.kernel.org/lkml/20180518175004.GF17671@n2100.armlinux.org.uk
  * "dma_sync_*_for_cpu and direction=TO_DEVICE (was Re: [PATCH 02/20]
  * dma-mapping: provide a generic dma-noncoherent implementation)"
  *
@@ -90,8 +90,7 @@ void arch_sync_dma_for_cpu(phys_addr_t paddr, size_t size,
 /*
  * Plug in direct dma map ops.
  */
-void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
-			const struct iommu_ops *iommu, bool coherent)
+void arch_setup_dma_ops(struct device *dev, bool coherent)
 {
 	/*
 	 * IOC hardware snoops all DMA traffic keeping the caches consistent
diff --git a/arch/arc/mm/extable.c b/arch/arc/mm/extable.c
index 4e14c4244ea2..88fa3a4d4906 100644
--- a/arch/arc/mm/extable.c
+++ b/arch/arc/mm/extable.c
@@ -22,14 +22,3 @@ int fixup_exception(struct pt_regs *regs)
 
 	return 0;
 }
-
-#ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
-
-unsigned long arc_clear_user_noinline(void __user *to,
-		unsigned long n)
-{
-	return __arc_clear_user(to, n);
-}
-EXPORT_SYMBOL(arc_clear_user_noinline);
-
-#endif
diff --git a/arch/arc/mm/fault.c b/arch/arc/mm/fault.c
index 5787c261c9a4..95119a5e7761 100644
--- a/arch/arc/mm/fault.c
+++ b/arch/arc/mm/fault.c
@@ -13,6 +13,7 @@
 #include <linux/kdebug.h>
 #include <linux/perf_event.h>
 #include <linux/mm_types.h>
+#include <asm/entry.h>
 #include <asm/mmu.h>
 
 /*
@@ -99,10 +100,10 @@ void do_page_fault(unsigned long address, struct pt_regs *regs)
 	if (faulthandler_disabled() || !mm)
 		goto no_context;
 
-	if (regs->ecr_cause & ECR_C_PROTV_STORE)	/* ST/EX */
+	if (regs->ecr.cause & ECR_C_PROTV_STORE)	/* ST/EX */
 		write = 1;
-	else if ((regs->ecr_vec == ECR_V_PROTV) &&
-	         (regs->ecr_cause == ECR_C_PROTV_INST_FETCH))
+	else if ((regs->ecr.vec == ECR_V_PROTV) &&
+	         (regs->ecr.cause == ECR_C_PROTV_INST_FETCH))
 		exec = 1;
 
 	flags = FAULT_FLAG_DEFAULT;
@@ -113,15 +114,9 @@ void do_page_fault(unsigned long address, struct pt_regs *regs)
 
 	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
 retry:
-	mmap_read_lock(mm);
-
-	vma = find_vma(mm, address);
+	vma = lock_mm_and_find_vma(mm, address, regs);
 	if (!vma)
-		goto bad_area;
-	if (unlikely(address < vma->vm_start)) {
-		if (!(vma->vm_flags & VM_GROWSDOWN) || expand_stack(vma, address))
-			goto bad_area;
-	}
+		goto bad_area_nosemaphore;
 
 	/*
 	 * vm_area is good, now check permissions for this memory access
@@ -146,11 +141,14 @@ retry:
 		return;
 	}
 
+	/* The fault is fully completed (including releasing mmap lock) */
+	if (fault & VM_FAULT_COMPLETED)
+		return;
+
 	/*
 	 * Fault retry nuances, mmap_lock already relinquished by core mm
 	 */
-	if (unlikely((fault & VM_FAULT_RETRY) &&
-		     (flags & FAULT_FLAG_ALLOW_RETRY))) {
+	if (unlikely(fault & VM_FAULT_RETRY)) {
 		flags |= FAULT_FLAG_TRIED;
 		goto retry;
 	}
@@ -158,6 +156,7 @@ retry:
 bad_area:
 	mmap_read_unlock(mm);
 
+bad_area_nosemaphore:
 	/*
 	 * Major/minor page fault accounting
 	 * (in case of retry we only land here once)
diff --git a/arch/arc/mm/init.c b/arch/arc/mm/init.c
index 699ecf119641..a73cc94f806e 100644
--- a/arch/arc/mm/init.c
+++ b/arch/arc/mm/init.c
@@ -15,6 +15,7 @@
 #include <linux/highmem.h>
 #include <asm/page.h>
 #include <asm/sections.h>
+#include <asm/setup.h>
 #include <asm/arcregs.h>
 
 pgd_t swapper_pg_dir[PTRS_PER_PGD] __aligned(PAGE_SIZE);
@@ -59,13 +60,13 @@ void __init early_init_dt_add_memory_arch(u64 base, u64 size)
 
 		low_mem_sz = size;
 		in_use = 1;
-		memblock_add_node(base, size, 0);
+		memblock_add_node(base, size, 0, MEMBLOCK_NONE);
 	} else {
 #ifdef CONFIG_HIGHMEM
 		high_mem_start = base;
 		high_mem_sz = size;
 		in_use = 1;
-		memblock_add_node(base, size, 1);
+		memblock_add_node(base, size, 1, MEMBLOCK_NONE);
 		memblock_reserve(base, size);
 #endif
 	}
@@ -74,11 +75,6 @@ void __init early_init_dt_add_memory_arch(u64 base, u64 size)
 		base, TO_MB(size), !in_use ? "Not used":"");
 }
 
-bool arch_has_descending_max_zone_pfns(void)
-{
-	return !IS_ENABLED(CONFIG_ARC_HAS_PAE40);
-}
-
 /*
  * First memory setup routine called from setup_arch()
  * 1. setup swapper's mm @init_mm
@@ -92,7 +88,7 @@ void __init setup_arch_memory(void)
 	setup_initial_init_mm(_text, _etext, _edata, _end);
 
 	/* first page of system - kernel .vector starts here */
-	min_low_pfn = virt_to_pfn(CONFIG_LINUX_RAM_BASE);
+	min_low_pfn = virt_to_pfn((void *)CONFIG_LINUX_RAM_BASE);
 
 	/* Last usable page of low mem */
 	max_low_pfn = max_pfn = PFN_DOWN(low_mem_start + low_mem_sz);
@@ -154,41 +150,18 @@ void __init setup_arch_memory(void)
 	 */
 	max_zone_pfn[ZONE_HIGHMEM] = max_high_pfn;
 
-	high_memory = (void *)(min_high_pfn << PAGE_SHIFT);
-
 	arch_pfn_offset = min(min_low_pfn, min_high_pfn);
 	kmap_init();
-
-#else /* CONFIG_HIGHMEM */
-	/* pfn_valid() uses this when FLATMEM=y and HIGHMEM=n */
-	max_mapnr = max_low_pfn - min_low_pfn;
-
 #endif /* CONFIG_HIGHMEM */
 
 	free_area_init(max_zone_pfn);
 }
 
-static void __init highmem_init(void)
+void __init arch_mm_preinit(void)
 {
 #ifdef CONFIG_HIGHMEM
-	unsigned long tmp;
-
-	memblock_free(high_mem_start, high_mem_sz);
-	for (tmp = min_high_pfn; tmp < max_high_pfn; tmp++)
-		free_highmem_page(pfn_to_page(tmp));
+	memblock_phys_free(high_mem_start, high_mem_sz);
 #endif
-}
-
-/*
- * mem_init - initializes memory
- *
- * Frees up bootmem
- * Calculates and displays memory available/used
- */
-void __init mem_init(void)
-{
-	memblock_free_all();
-	highmem_init();
 
 	BUILD_BUG_ON((PTRS_PER_PGD * sizeof(pgd_t)) > PAGE_SIZE);
 	BUILD_BUG_ON((PTRS_PER_PUD * sizeof(pud_t)) > PAGE_SIZE);
diff --git a/arch/arc/mm/ioremap.c b/arch/arc/mm/ioremap.c
index 0ee75aca6e10..fd8897a0e52c 100644
--- a/arch/arc/mm/ioremap.c
+++ b/arch/arc/mm/ioremap.c
@@ -8,7 +8,6 @@
 #include <linux/module.h>
 #include <linux/io.h>
 #include <linux/mm.h>
-#include <linux/slab.h>
 #include <linux/cache.h>
 
 static inline bool arc_uncached_addr_space(phys_addr_t paddr)
@@ -25,13 +24,6 @@ static inline bool arc_uncached_addr_space(phys_addr_t paddr)
 
 void __iomem *ioremap(phys_addr_t paddr, unsigned long size)
 {
-	phys_addr_t end;
-
-	/* Don't allow wraparound or zero size */
-	end = paddr + size - 1;
-	if (!size || (end < paddr))
-		return NULL;
-
 	/*
 	 * If the region is h/w uncached, MMU mapping can be elided as optim
 	 * The cast to u32 is fine as this region can only be inside 4GB
@@ -40,7 +32,7 @@ void __iomem *ioremap(phys_addr_t paddr, unsigned long size)
 		return (void __iomem *)(u32)paddr;
 
 	return ioremap_prot(paddr, size,
-			    pgprot_val(pgprot_noncached(PAGE_KERNEL)));
+			    pgprot_noncached(PAGE_KERNEL));
 }
 EXPORT_SYMBOL(ioremap);
 
@@ -51,55 +43,20 @@ EXPORT_SYMBOL(ioremap);
  * ARC hardware uncached region, this one still goes thru the MMU as caller
  * might need finer access control (R/W/X)
  */
-void __iomem *ioremap_prot(phys_addr_t paddr, unsigned long size,
-			   unsigned long flags)
+void __iomem *ioremap_prot(phys_addr_t paddr, size_t size,
+			   pgprot_t prot)
 {
-	unsigned int off;
-	unsigned long vaddr;
-	struct vm_struct *area;
-	phys_addr_t end;
-	pgprot_t prot = __pgprot(flags);
-
-	/* Don't allow wraparound, zero size */
-	end = paddr + size - 1;
-	if ((!size) || (end < paddr))
-		return NULL;
-
-	/* An early platform driver might end up here */
-	if (!slab_is_available())
-		return NULL;
-
 	/* force uncached */
-	prot = pgprot_noncached(prot);
-
-	/* Mappings have to be page-aligned */
-	off = paddr & ~PAGE_MASK;
-	paddr &= PAGE_MASK_PHYS;
-	size = PAGE_ALIGN(end + 1) - paddr;
-
-	/*
-	 * Ok, go for it..
-	 */
-	area = get_vm_area(size, VM_IOREMAP);
-	if (!area)
-		return NULL;
-	area->phys_addr = paddr;
-	vaddr = (unsigned long)area->addr;
-	if (ioremap_page_range(vaddr, vaddr + size, paddr, prot)) {
-		vunmap((void __force *)vaddr);
-		return NULL;
-	}
-	return (void __iomem *)(off + (char __iomem *)vaddr);
+	return generic_ioremap_prot(paddr, size, pgprot_noncached(prot));
 }
 EXPORT_SYMBOL(ioremap_prot);
 
-
-void iounmap(const void __iomem *addr)
+void iounmap(volatile void __iomem *addr)
 {
 	/* weird double cast to handle phys_addr_t > 32 bits */
 	if (arc_uncached_addr_space((phys_addr_t)(u32)addr))
 		return;
 
-	vfree((void *)(PAGE_MASK & (unsigned long __force)addr));
+	generic_iounmap(addr);
 }
 EXPORT_SYMBOL(iounmap);
diff --git a/arch/arc/mm/mmap.c b/arch/arc/mm/mmap.c
index 722d26b94307..2185afe8d59f 100644
--- a/arch/arc/mm/mmap.c
+++ b/arch/arc/mm/mmap.c
@@ -14,10 +14,6 @@
 
 #include <asm/cacheflush.h>
 
-#define COLOUR_ALIGN(addr, pgoff)			\
-	((((addr) + SHMLBA - 1) & ~(SHMLBA - 1)) +	\
-	 (((pgoff) << PAGE_SHIFT) & (SHMLBA - 1)))
-
 /*
  * Ensure that shared mappings are correctly aligned to
  * avoid aliasing issues with VIPT caches.
@@ -27,25 +23,18 @@
  */
 unsigned long
 arch_get_unmapped_area(struct file *filp, unsigned long addr,
-		unsigned long len, unsigned long pgoff, unsigned long flags)
+		unsigned long len, unsigned long pgoff,
+		unsigned long flags, vm_flags_t vm_flags)
 {
 	struct mm_struct *mm = current->mm;
 	struct vm_area_struct *vma;
-	int do_align = 0;
-	int aliasing = cache_is_vipt_aliasing();
-	struct vm_unmapped_area_info info;
-
-	/*
-	 * We only need to do colour alignment if D cache aliases.
-	 */
-	if (aliasing)
-		do_align = filp || (flags & MAP_SHARED);
+	struct vm_unmapped_area_info info = {};
 
 	/*
 	 * We enforce the MAP_FIXED case.
 	 */
 	if (flags & MAP_FIXED) {
-		if (aliasing && flags & MAP_SHARED &&
+		if (flags & MAP_SHARED &&
 		    (addr - (pgoff << PAGE_SHIFT)) & (SHMLBA - 1))
 			return -EINVAL;
 		return addr;
@@ -55,10 +44,7 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
 		return -ENOMEM;
 
 	if (addr) {
-		if (do_align)
-			addr = COLOUR_ALIGN(addr, pgoff);
-		else
-			addr = PAGE_ALIGN(addr);
+		addr = PAGE_ALIGN(addr);
 
 		vma = find_vma(mm, addr);
 		if (TASK_SIZE - len >= addr &&
@@ -66,11 +52,29 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
 			return addr;
 	}
 
-	info.flags = 0;
 	info.length = len;
 	info.low_limit = mm->mmap_base;
 	info.high_limit = TASK_SIZE;
-	info.align_mask = do_align ? (PAGE_MASK & (SHMLBA - 1)) : 0;
 	info.align_offset = pgoff << PAGE_SHIFT;
 	return vm_unmapped_area(&info);
 }
+
+static const pgprot_t protection_map[16] = {
+	[VM_NONE]					= PAGE_U_NONE,
+	[VM_READ]					= PAGE_U_R,
+	[VM_WRITE]					= PAGE_U_R,
+	[VM_WRITE | VM_READ]				= PAGE_U_R,
+	[VM_EXEC]					= PAGE_U_X_R,
+	[VM_EXEC | VM_READ]				= PAGE_U_X_R,
+	[VM_EXEC | VM_WRITE]				= PAGE_U_X_R,
+	[VM_EXEC | VM_WRITE | VM_READ]			= PAGE_U_X_R,
+	[VM_SHARED]					= PAGE_U_NONE,
+	[VM_SHARED | VM_READ]				= PAGE_U_R,
+	[VM_SHARED | VM_WRITE]				= PAGE_U_W_R,
+	[VM_SHARED | VM_WRITE | VM_READ]		= PAGE_U_W_R,
+	[VM_SHARED | VM_EXEC]				= PAGE_U_X_R,
+	[VM_SHARED | VM_EXEC | VM_READ]			= PAGE_U_X_R,
+	[VM_SHARED | VM_EXEC | VM_WRITE]		= PAGE_U_X_W_R,
+	[VM_SHARED | VM_EXEC | VM_WRITE | VM_READ]	= PAGE_U_X_W_R
+};
+DECLARE_VM_GET_PAGE_PROT
diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c
index 5f71445f26bd..ed6915ba76ec 100644
--- a/arch/arc/mm/tlb.c
+++ b/arch/arc/mm/tlb.c
@@ -18,7 +18,9 @@
 /* A copy of the ASID from the PID reg is kept in asid_cache */
 DEFINE_PER_CPU(unsigned int, asid_cache) = MM_CTXT_FIRST_CYCLE;
 
-static int __read_mostly pae_exists;
+static struct cpuinfo_arc_mmu {
+	unsigned int ver, pg_sz_k, s_pg_sz_m, pae, sets, ways;
+} mmuinfo;
 
 /*
  * Utility Routine to erase a J-TLB entry
@@ -131,7 +133,7 @@ static void tlb_entry_insert(unsigned int pd0, phys_addr_t pd1)
 
 noinline void local_flush_tlb_all(void)
 {
-	struct cpuinfo_arc_mmu *mmu = &cpuinfo_arc700[smp_processor_id()].mmu;
+	struct cpuinfo_arc_mmu *mmu = &mmuinfo;
 	unsigned long flags;
 	unsigned int entry;
 	int num_tlb = mmu->sets * mmu->ways;
@@ -210,7 +212,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 	unsigned long flags;
 
 	/* If range @start to @end is more than 32 TLB entries deep,
-	 * its better to move to a new ASID rather than searching for
+	 * it's better to move to a new ASID rather than searching for
 	 * individual entries and then shooting them down
 	 *
 	 * The calc above is rough, doesn't account for unaligned parts,
@@ -389,7 +391,7 @@ void flush_tlb_kernel_range(unsigned long start, unsigned long end)
 /*
  * Routine to create a TLB entry
  */
-void create_tlb(struct vm_area_struct *vma, unsigned long vaddr, pte_t *ptep)
+static void create_tlb(struct vm_area_struct *vma, unsigned long vaddr, pte_t *ptep)
 {
 	unsigned long flags;
 	unsigned int asid_or_sasid, rwx;
@@ -406,7 +408,7 @@ void create_tlb(struct vm_area_struct *vma, unsigned long vaddr, pte_t *ptep)
 	 * -More importantly it makes this handler inconsistent with fast-path
 	 *  TLB Refill handler which always deals with "current"
 	 *
-	 * Lets see the use cases when current->mm != vma->mm and we land here
+	 * Let's see the use cases when current->mm != vma->mm and we land here
 	 *  1. execve->copy_strings()->__get_user_pages->handle_mm_fault
 	 *     Here VM wants to pre-install a TLB entry for user stack while
 	 *     current->mm still points to pre-execve mm (hence the condition).
@@ -467,8 +469,8 @@ void create_tlb(struct vm_area_struct *vma, unsigned long vaddr, pte_t *ptep)
  * Note that flush (when done) involves both WBACK - so physical page is
  * in sync as well as INV - so any non-congruent aliases don't remain
  */
-void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddr_unaligned,
-		      pte_t *ptep)
+void update_mmu_cache_range(struct vm_fault *vmf, struct vm_area_struct *vma,
+		unsigned long vaddr_unaligned, pte_t *ptep, unsigned int nr)
 {
 	unsigned long vaddr = vaddr_unaligned & PAGE_MASK;
 	phys_addr_t paddr = pte_val(*ptep) & PAGE_MASK_PHYS;
@@ -476,30 +478,28 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddr_unaligned,
 
 	create_tlb(vma, vaddr, ptep);
 
-	if (page == ZERO_PAGE(0)) {
+	if (page == ZERO_PAGE(0))
 		return;
-	}
 
 	/*
-	 * Exec page : Independent of aliasing/page-color considerations,
-	 *	       since icache doesn't snoop dcache on ARC, any dirty
-	 *	       K-mapping of a code page needs to be wback+inv so that
-	 *	       icache fetch by userspace sees code correctly.
-	 * !EXEC page: If K-mapping is NOT congruent to U-mapping, flush it
-	 *	       so userspace sees the right data.
-	 *  (Avoids the flush for Non-exec + congruent mapping case)
+	 * For executable pages, since icache doesn't snoop dcache, any
+	 * dirty K-mapping of a code page needs to be wback+inv so that
+	 * icache fetch by userspace sees code correctly.
 	 */
-	if ((vma->vm_flags & VM_EXEC) ||
-	     addr_not_cache_congruent(paddr, vaddr)) {
-
-		int dirty = !test_and_set_bit(PG_dc_clean, &page->flags);
+	if (vma->vm_flags & VM_EXEC) {
+		struct folio *folio = page_folio(page);
+		int dirty = !test_and_set_bit(PG_dc_clean, &folio->flags.f);
 		if (dirty) {
+			unsigned long offset = offset_in_folio(folio, paddr);
+			nr = folio_nr_pages(folio);
+			paddr -= offset;
+			vaddr -= offset;
 			/* wback + inv dcache lines (K-mapping) */
-			__flush_dcache_page(paddr, paddr);
+			__flush_dcache_pages(paddr, paddr, nr);
 
 			/* invalidate any existing icache lines (U-mapping) */
 			if (vma->vm_flags & VM_EXEC)
-				__inv_icache_page(paddr, vaddr);
+				__inv_icache_pages(paddr, vaddr, nr);
 		}
 	}
 }
@@ -531,7 +531,7 @@ void update_mmu_cache_pmd(struct vm_area_struct *vma, unsigned long addr,
 				 pmd_t *pmd)
 {
 	pte_t pte = __pte(pmd_val(*pmd));
-	update_mmu_cache(vma, addr, &pte);
+	update_mmu_cache_range(NULL, vma, addr, &pte, HPAGE_PMD_NR);
 }
 
 void local_flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start,
@@ -560,89 +560,64 @@ void local_flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start,
  * the cpuinfo structure for later use.
  * No Validation is done here, simply read/convert the BCRs
  */
-void read_decode_mmu_bcr(void)
+int arc_mmu_mumbojumbo(int c, char *buf, int len)
 {
-	struct cpuinfo_arc_mmu *mmu = &cpuinfo_arc700[smp_processor_id()].mmu;
-	unsigned int tmp;
-	struct bcr_mmu_3 {
-#ifdef CONFIG_CPU_BIG_ENDIAN
-	unsigned int ver:8, ways:4, sets:4, res:3, sasid:1, pg_sz:4,
-		     u_itlb:4, u_dtlb:4;
-#else
-	unsigned int u_dtlb:4, u_itlb:4, pg_sz:4, sasid:1, res:3, sets:4,
-		     ways:4, ver:8;
-#endif
-	} *mmu3;
-
-	struct bcr_mmu_4 {
-#ifdef CONFIG_CPU_BIG_ENDIAN
-	unsigned int ver:8, sasid:1, sz1:4, sz0:4, res:2, pae:1,
-		     n_ways:2, n_entry:2, n_super:2, u_itlb:3, u_dtlb:3;
-#else
-	/*           DTLB      ITLB      JES        JE         JA      */
-	unsigned int u_dtlb:3, u_itlb:3, n_super:2, n_entry:2, n_ways:2,
-		     pae:1, res:2, sz0:4, sz1:4, sasid:1, ver:8;
-#endif
-	} *mmu4;
+	struct cpuinfo_arc_mmu *mmu = &mmuinfo;
+	unsigned int bcr, u_dtlb, u_itlb, sasid;
+	struct bcr_mmu_3 *mmu3;
+	struct bcr_mmu_4 *mmu4;
+	char super_pg[64] = "";
+	int n = 0;
 
-	tmp = read_aux_reg(ARC_REG_MMU_BCR);
-	mmu->ver = (tmp >> 24);
+	bcr = read_aux_reg(ARC_REG_MMU_BCR);
+	mmu->ver = (bcr >> 24);
 
 	if (is_isa_arcompact() && mmu->ver == 3) {
-		mmu3 = (struct bcr_mmu_3 *)&tmp;
+		mmu3 = (struct bcr_mmu_3 *)&bcr;
 		mmu->pg_sz_k = 1 << (mmu3->pg_sz - 1);
 		mmu->sets = 1 << mmu3->sets;
 		mmu->ways = 1 << mmu3->ways;
-		mmu->u_dtlb = mmu3->u_dtlb;
-		mmu->u_itlb = mmu3->u_itlb;
-		mmu->sasid = mmu3->sasid;
+		u_dtlb = mmu3->u_dtlb;
+		u_itlb = mmu3->u_itlb;
+		sasid = mmu3->sasid;
 	} else {
-		mmu4 = (struct bcr_mmu_4 *)&tmp;
+		mmu4 = (struct bcr_mmu_4 *)&bcr;
 		mmu->pg_sz_k = 1 << (mmu4->sz0 - 1);
 		mmu->s_pg_sz_m = 1 << (mmu4->sz1 - 11);
 		mmu->sets = 64 << mmu4->n_entry;
 		mmu->ways = mmu4->n_ways * 2;
-		mmu->u_dtlb = mmu4->u_dtlb * 4;
-		mmu->u_itlb = mmu4->u_itlb * 4;
-		mmu->sasid = mmu4->sasid;
-		pae_exists = mmu->pae = mmu4->pae;
+		u_dtlb = mmu4->u_dtlb * 4;
+		u_itlb = mmu4->u_itlb * 4;
+		sasid = mmu4->sasid;
+		mmu->pae = mmu4->pae;
 	}
-}
 
-char *arc_mmu_mumbojumbo(int cpu_id, char *buf, int len)
-{
-	int n = 0;
-	struct cpuinfo_arc_mmu *p_mmu = &cpuinfo_arc700[cpu_id].mmu;
-	char super_pg[64] = "";
-
-	if (p_mmu->s_pg_sz_m)
-		scnprintf(super_pg, 64, "%dM Super Page %s",
-			  p_mmu->s_pg_sz_m,
-			  IS_USED_CFG(CONFIG_TRANSPARENT_HUGEPAGE));
+	if (mmu->s_pg_sz_m)
+		scnprintf(super_pg, 64, "/%dM%s",
+			  mmu->s_pg_sz_m,
+			  IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE) ? " (THP enabled)":"");
 
 	n += scnprintf(buf + n, len - n,
-		      "MMU [v%x]\t: %dk PAGE, %s, swalk %d lvl, JTLB %d (%dx%d), uDTLB %d, uITLB %d%s%s\n",
-		       p_mmu->ver, p_mmu->pg_sz_k, super_pg,  CONFIG_PGTABLE_LEVELS,
-		       p_mmu->sets * p_mmu->ways, p_mmu->sets, p_mmu->ways,
-		       p_mmu->u_dtlb, p_mmu->u_itlb,
-		       IS_AVAIL2(p_mmu->pae, ", PAE40 ", CONFIG_ARC_HAS_PAE40));
-
-	return buf;
+		      "MMU [v%x]\t: %dk%s, swalk %d lvl, JTLB %dx%d, uDTLB %d, uITLB %d%s%s%s\n",
+		       mmu->ver, mmu->pg_sz_k, super_pg, CONFIG_PGTABLE_LEVELS,
+		       mmu->sets, mmu->ways,
+		       u_dtlb, u_itlb,
+		       IS_AVAIL1(sasid, ", SASID"),
+		       IS_AVAIL2(mmu->pae, ", PAE40 ", CONFIG_ARC_HAS_PAE40));
+
+	return n;
 }
 
 int pae40_exist_but_not_enab(void)
 {
-	return pae_exists && !is_pae40_enabled();
+	return mmuinfo.pae && !is_pae40_enabled();
 }
 
 void arc_mmu_init(void)
 {
-	struct cpuinfo_arc_mmu *mmu = &cpuinfo_arc700[smp_processor_id()].mmu;
-	char str[256];
+	struct cpuinfo_arc_mmu *mmu = &mmuinfo;
 	int compat = 0;
 
-	pr_info("%s", arc_mmu_mumbojumbo(0, str, sizeof(str)));
-
 	/*
 	 * Can't be done in processor.h due to header include dependencies
 	 */
@@ -719,7 +694,7 @@ volatile int dup_pd_silent; /* Be silent abt it or complain (default) */
 void do_tlb_overlap_fault(unsigned long cause, unsigned long address,
 			  struct pt_regs *regs)
 {
-	struct cpuinfo_arc_mmu *mmu = &cpuinfo_arc700[smp_processor_id()].mmu;
+	struct cpuinfo_arc_mmu *mmu = &mmuinfo;
 	unsigned long flags;
 	int set, n_ways = mmu->ways;
 
diff --git a/arch/arc/mm/tlbex.S b/arch/arc/mm/tlbex.S
index e054780a8fe0..dc65e87a531f 100644
--- a/arch/arc/mm/tlbex.S
+++ b/arch/arc/mm/tlbex.S
@@ -5,19 +5,19 @@
  * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
  *
  * Vineetg: April 2011 :
- *  -MMU v1: moved out legacy code into a seperate file
+ *  -MMU v1: moved out legacy code into a separate file
  *  -MMU v3: PD{0,1} bits layout changed: They don't overlap anymore,
  *      helps avoid a shift when preparing PD0 from PTE
  *
  * Vineetg: July 2009
- *  -For MMU V2, we need not do heuristics at the time of commiting a D-TLB
- *   entry, so that it doesn't knock out it's I-TLB entry
+ *  -For MMU V2, we need not do heuristics at the time of committing a D-TLB
+ *   entry, so that it doesn't knock out its I-TLB entry
  *  -Some more fine tuning:
  *   bmsk instead of add, asl.cc instead of branch, delay slot utilise etc
  *
  * Vineetg: July 2009
  *  -Practically rewrote the I/D TLB Miss handlers
- *   Now 40 and 135 instructions a peice as compared to 131 and 449 resp.
+ *   Now 40 and 135 instructions apiece as compared to 131 and 449 resp.
  *   Hence Leaner by 1.5 K
  *   Used Conditional arithmetic to replace excessive branching
  *   Also used short instructions wherever possible
diff --git a/arch/arc/net/Makefile b/arch/arc/net/Makefile
new file mode 100644
index 000000000000..ea5790952e9a
--- /dev/null
+++ b/arch/arc/net/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+ifeq ($(CONFIG_ISA_ARCV2),y)
+	obj-$(CONFIG_BPF_JIT) += bpf_jit_core.o
+	obj-$(CONFIG_BPF_JIT) += bpf_jit_arcv2.o
+endif
diff --git a/arch/arc/net/bpf_jit.h b/arch/arc/net/bpf_jit.h
new file mode 100644
index 000000000000..495f3023e4c1
--- /dev/null
+++ b/arch/arc/net/bpf_jit.h
@@ -0,0 +1,164 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * The interface that a back-end should provide to bpf_jit_core.c.
+ *
+ * Copyright (c) 2024 Synopsys Inc.
+ * Author: Shahab Vahedi <shahab@synopsys.com>
+ */
+
+#ifndef _ARC_BPF_JIT_H
+#define _ARC_BPF_JIT_H
+
+#include <linux/bpf.h>
+#include <linux/filter.h>
+
+/* Print debug info and assert. */
+//#define ARC_BPF_JIT_DEBUG
+
+/* Determine the address type of the target. */
+#ifdef CONFIG_ISA_ARCV2
+#define ARC_ADDR u32
+#endif
+
+/*
+ * For the translation of some BPF instructions, a temporary register
+ * might be needed for some interim data.
+ */
+#define JIT_REG_TMP MAX_BPF_JIT_REG
+
+/*
+ * Buffer access: If buffer "b" is not NULL, advance by "n" bytes.
+ *
+ * This macro must be used in any place that potentially requires a
+ * "buf + len". This way, we make sure that the "buf" argument for
+ * the underlying "arc_*(buf, ...)" ends up as NULL instead of something
+ * like "0+4" or "0+8", etc. Those "arc_*()" functions check their "buf"
+ * value to decide if instructions should be emitted or not.
+ */
+#define BUF(b, n) (((b) != NULL) ? ((b) + (n)) : (b))
+
+/************** Functions that the back-end must provide **************/
+/* Extension for 32-bit operations. */
+u8 zext(u8 *buf, u8 rd);
+/***** Moves *****/
+u8 mov_r32(u8 *buf, u8 rd, u8 rs, u8 sign_ext);
+u8 mov_r32_i32(u8 *buf, u8 reg, s32 imm);
+u8 mov_r64(u8 *buf, u8 rd, u8 rs, u8 sign_ext);
+u8 mov_r64_i32(u8 *buf, u8 reg, s32 imm);
+u8 mov_r64_i64(u8 *buf, u8 reg, u32 lo, u32 hi);
+/***** Loads and stores *****/
+u8 load_r(u8 *buf, u8 rd, u8 rs, s16 off, u8 size, bool sign_ext);
+u8 store_r(u8 *buf, u8 rd, u8 rs, s16 off, u8 size);
+u8 store_i(u8 *buf, s32 imm, u8 rd, s16 off, u8 size);
+/***** Addition *****/
+u8 add_r32(u8 *buf, u8 rd, u8 rs);
+u8 add_r32_i32(u8 *buf, u8 rd, s32 imm);
+u8 add_r64(u8 *buf, u8 rd, u8 rs);
+u8 add_r64_i32(u8 *buf, u8 rd, s32 imm);
+/***** Subtraction *****/
+u8 sub_r32(u8 *buf, u8 rd, u8 rs);
+u8 sub_r32_i32(u8 *buf, u8 rd, s32 imm);
+u8 sub_r64(u8 *buf, u8 rd, u8 rs);
+u8 sub_r64_i32(u8 *buf, u8 rd, s32 imm);
+/***** Multiplication *****/
+u8 mul_r32(u8 *buf, u8 rd, u8 rs);
+u8 mul_r32_i32(u8 *buf, u8 rd, s32 imm);
+u8 mul_r64(u8 *buf, u8 rd, u8 rs);
+u8 mul_r64_i32(u8 *buf, u8 rd, s32 imm);
+/***** Division *****/
+u8 div_r32(u8 *buf, u8 rd, u8 rs, bool sign_ext);
+u8 div_r32_i32(u8 *buf, u8 rd, s32 imm, bool sign_ext);
+/***** Remainder *****/
+u8 mod_r32(u8 *buf, u8 rd, u8 rs, bool sign_ext);
+u8 mod_r32_i32(u8 *buf, u8 rd, s32 imm, bool sign_ext);
+/***** Bitwise AND *****/
+u8 and_r32(u8 *buf, u8 rd, u8 rs);
+u8 and_r32_i32(u8 *buf, u8 rd, s32 imm);
+u8 and_r64(u8 *buf, u8 rd, u8 rs);
+u8 and_r64_i32(u8 *buf, u8 rd, s32 imm);
+/***** Bitwise OR *****/
+u8 or_r32(u8 *buf, u8 rd, u8 rs);
+u8 or_r32_i32(u8 *buf, u8 rd, s32 imm);
+u8 or_r64(u8 *buf, u8 rd, u8 rs);
+u8 or_r64_i32(u8 *buf, u8 rd, s32 imm);
+/***** Bitwise XOR *****/
+u8 xor_r32(u8 *buf, u8 rd, u8 rs);
+u8 xor_r32_i32(u8 *buf, u8 rd, s32 imm);
+u8 xor_r64(u8 *buf, u8 rd, u8 rs);
+u8 xor_r64_i32(u8 *buf, u8 rd, s32 imm);
+/***** Bitwise Negate *****/
+u8 neg_r32(u8 *buf, u8 r);
+u8 neg_r64(u8 *buf, u8 r);
+/***** Bitwise left shift *****/
+u8 lsh_r32(u8 *buf, u8 rd, u8 rs);
+u8 lsh_r32_i32(u8 *buf, u8 rd, u8 imm);
+u8 lsh_r64(u8 *buf, u8 rd, u8 rs);
+u8 lsh_r64_i32(u8 *buf, u8 rd, s32 imm);
+/***** Bitwise right shift (logical) *****/
+u8 rsh_r32(u8 *buf, u8 rd, u8 rs);
+u8 rsh_r32_i32(u8 *buf, u8 rd, u8 imm);
+u8 rsh_r64(u8 *buf, u8 rd, u8 rs);
+u8 rsh_r64_i32(u8 *buf, u8 rd, s32 imm);
+/***** Bitwise right shift (arithmetic) *****/
+u8 arsh_r32(u8 *buf, u8 rd, u8 rs);
+u8 arsh_r32_i32(u8 *buf, u8 rd, u8 imm);
+u8 arsh_r64(u8 *buf, u8 rd, u8 rs);
+u8 arsh_r64_i32(u8 *buf, u8 rd, s32 imm);
+/***** Frame related *****/
+u32 mask_for_used_regs(u8 bpf_reg, bool is_call);
+u8 arc_prologue(u8 *buf, u32 usage, u16 frame_size);
+u8 arc_epilogue(u8 *buf, u32 usage, u16 frame_size);
+/***** Jumps *****/
+/*
+ * Different sorts of conditions (ARC enum as opposed to BPF_*).
+ *
+ * Do not change the order of enums here. ARC_CC_SLE+1 is used
+ * to determine the number of JCCs.
+ */
+enum ARC_CC {
+	ARC_CC_UGT = 0,		/* unsigned >  */
+	ARC_CC_UGE,		/* unsigned >= */
+	ARC_CC_ULT,		/* unsigned <  */
+	ARC_CC_ULE,		/* unsigned <= */
+	ARC_CC_SGT,		/*   signed >  */
+	ARC_CC_SGE,		/*   signed >= */
+	ARC_CC_SLT,		/*   signed <  */
+	ARC_CC_SLE,		/*   signed <= */
+	ARC_CC_AL,		/* always      */
+	ARC_CC_EQ,		/*          == */
+	ARC_CC_NE,		/*          != */
+	ARC_CC_SET,		/* test        */
+	ARC_CC_LAST
+};
+
+/*
+ * A few notes:
+ *
+ * - check_jmp_*() are prerequisites before calling the gen_jmp_*().
+ *   They return "true" if the jump is possible and "false" otherwise.
+ *
+ * - The notion of "*_off" is to emphasize that these parameters are
+ *   merely offsets in the JIT stream and not absolute addresses. One
+ *   can look at them as addresses if the JIT code would start from
+ *   address 0x0000_0000. Nonetheless, since the buffer address for the
+ *   JIT is on a word-aligned address, this works and actually makes
+ *   things simpler (offsets are in the range of u32 which is more than
+ *   enough).
+ */
+bool check_jmp_32(u32 curr_off, u32 targ_off, u8 cond);
+bool check_jmp_64(u32 curr_off, u32 targ_off, u8 cond);
+u8 gen_jmp_32(u8 *buf, u8 rd, u8 rs, u8 cond, u32 c_off, u32 t_off);
+u8 gen_jmp_64(u8 *buf, u8 rd, u8 rs, u8 cond, u32 c_off, u32 t_off);
+/***** Miscellaneous *****/
+u8 gen_func_call(u8 *buf, ARC_ADDR func_addr, bool external_func);
+u8 arc_to_bpf_return(u8 *buf);
+/*
+ * - Perform byte swaps on "rd" based on the "size".
+ * - If "force" is set, do it unconditionally. Otherwise, consider the
+ *   desired "endian"ness and the host endianness.
+ * - For data "size"s up to 32 bits, perform a zero-extension if asked
+ *   by the "do_zext" boolean.
+ */
+u8 gen_swap(u8 *buf, u8 rd, u8 size, u8 endian, bool force, bool do_zext);
+
+#endif /* _ARC_BPF_JIT_H */
diff --git a/arch/arc/net/bpf_jit_arcv2.c b/arch/arc/net/bpf_jit_arcv2.c
new file mode 100644
index 000000000000..6d989b6d88c6
--- /dev/null
+++ b/arch/arc/net/bpf_jit_arcv2.c
@@ -0,0 +1,3007 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * The ARCv2 backend of Just-In-Time compiler for eBPF bytecode.
+ *
+ * Copyright (c) 2024 Synopsys Inc.
+ * Author: Shahab Vahedi <shahab@synopsys.com>
+ */
+#include <linux/bug.h>
+#include "bpf_jit.h"
+
+/* ARC core registers. */
+enum {
+	ARC_R_0,  ARC_R_1,  ARC_R_2,  ARC_R_3,  ARC_R_4,  ARC_R_5,
+	ARC_R_6,  ARC_R_7,  ARC_R_8,  ARC_R_9,  ARC_R_10, ARC_R_11,
+	ARC_R_12, ARC_R_13, ARC_R_14, ARC_R_15, ARC_R_16, ARC_R_17,
+	ARC_R_18, ARC_R_19, ARC_R_20, ARC_R_21, ARC_R_22, ARC_R_23,
+	ARC_R_24, ARC_R_25, ARC_R_26, ARC_R_FP, ARC_R_SP, ARC_R_ILINK,
+	ARC_R_30, ARC_R_BLINK,
+	/*
+	 * Having ARC_R_IMM encoded as source register means there is an
+	 * immediate that must be interpreted from the next 4 bytes. If
+	 * encoded as the destination register though, it implies that the
+	 * output of the operation is not assigned to any register. The
+	 * latter is helpful if we only care about updating the CPU status
+	 * flags.
+	 */
+	ARC_R_IMM = 62
+};
+
+/*
+ * Remarks about the rationale behind the chosen mapping:
+ *
+ * - BPF_REG_{1,2,3,4} are the argument registers and must be mapped to
+ *   argument registers in ARCv2 ABI: r0-r7. The r7 registers is the last
+ *   argument register in the ABI. Therefore BPF_REG_5, as the fifth
+ *   argument, must be pushed onto the stack. This is a must for calling
+ *   in-kernel functions.
+ *
+ * - In ARCv2 ABI, the return value is in r0 for 32-bit results and (r1,r0)
+ *   for 64-bit results. However, because they're already used for BPF_REG_1,
+ *   the next available scratch registers, r8 and r9, are the best candidates
+ *   for BPF_REG_0. After a "call" to a(n) (in-kernel) function, the result
+ *   is "mov"ed to these registers. At a BPF_EXIT, their value is "mov"ed to
+ *   (r1,r0).
+ *   It is worth mentioning that scratch registers are the best choice for
+ *   BPF_REG_0, because it is very popular in BPF instruction encoding.
+ *
+ * - JIT_REG_TMP is an artifact needed to translate some BPF instructions.
+ *   Its life span is one single BPF instruction. Since during the
+ *   analyze_reg_usage(), it is not known if temporary registers are used,
+ *   it is mapped to ARC's scratch registers: r10 and r11. Therefore, they
+ *   don't matter in analysing phase and don't need saving. This temporary
+ *   register is added as yet another index in the bpf2arc array, so it will
+ *   unfold like the rest of registers during the code generation process.
+ *
+ * - Mapping of callee-saved BPF registers, BPF_REG_{6,7,8,9}, starts from
+ *   (r15,r14) register pair. The (r13,r12) is not a good choice, because
+ *   in ARCv2 ABI, r12 is not a callee-saved register and this can cause
+ *   problem when calling an in-kernel function. Theoretically, the mapping
+ *   could start from (r14,r13), but it is not a conventional ARCv2 register
+ *   pair. To have a future proof design, I opted for this arrangement.
+ *   If/when we decide to add ARCv2 instructions that do use register pairs,
+ *   the mapping, hopefully, doesn't need to be revisited.
+ */
+static const u8 bpf2arc[][2] = {
+	/* Return value from in-kernel function, and exit value from eBPF */
+	[BPF_REG_0] = {ARC_R_8, ARC_R_9},
+	/* Arguments from eBPF program to in-kernel function */
+	[BPF_REG_1] = {ARC_R_0, ARC_R_1},
+	[BPF_REG_2] = {ARC_R_2, ARC_R_3},
+	[BPF_REG_3] = {ARC_R_4, ARC_R_5},
+	[BPF_REG_4] = {ARC_R_6, ARC_R_7},
+	/* Remaining arguments, to be passed on the stack per 32-bit ABI */
+	[BPF_REG_5] = {ARC_R_22, ARC_R_23},
+	/* Callee-saved registers that in-kernel function will preserve */
+	[BPF_REG_6] = {ARC_R_14, ARC_R_15},
+	[BPF_REG_7] = {ARC_R_16, ARC_R_17},
+	[BPF_REG_8] = {ARC_R_18, ARC_R_19},
+	[BPF_REG_9] = {ARC_R_20, ARC_R_21},
+	/* Read-only frame pointer to access the eBPF stack. 32-bit only. */
+	[BPF_REG_FP] = {ARC_R_FP, },
+	/* Register for blinding constants */
+	[BPF_REG_AX] = {ARC_R_24, ARC_R_25},
+	/* Temporary registers for internal use */
+	[JIT_REG_TMP] = {ARC_R_10, ARC_R_11}
+};
+
+#define ARC_CALLEE_SAVED_REG_FIRST ARC_R_13
+#define ARC_CALLEE_SAVED_REG_LAST  ARC_R_25
+
+#define REG_LO(r) (bpf2arc[(r)][0])
+#define REG_HI(r) (bpf2arc[(r)][1])
+
+/*
+ * To comply with ARCv2 ABI, BPF's arg5 must be put on stack. After which,
+ * the stack needs to be restored by ARG5_SIZE.
+ */
+#define ARG5_SIZE 8
+
+/* Instruction lengths in bytes. */
+enum {
+	INSN_len_normal = 4,	/* Normal instructions length. */
+	INSN_len_imm = 4	/* Length of an extra 32-bit immediate. */
+};
+
+/* ZZ defines the size of operation in encodings that it is used. */
+enum {
+	ZZ_1_byte = 1,
+	ZZ_2_byte = 2,
+	ZZ_4_byte = 0,
+	ZZ_8_byte = 3
+};
+
+/*
+ * AA is mostly about address write back mode. It determines if the
+ * address in question should be updated before usage or after:
+ *   addr += offset; data = *addr;
+ *   data = *addr; addr += offset;
+ *
+ * In "scaling" mode, the effective address will become the sum
+ * of "address" + "index"*"size". The "size" is specified by the
+ * "ZZ" field. There is no write back when AA is set for scaling:
+ *   data = *(addr + offset<<zz)
+ */
+enum {
+	AA_none  = 0,
+	AA_pre   = 1,	/* in assembly known as "a/aw". */
+	AA_post  = 2,	/* in assembly known as "ab". */
+	AA_scale = 3	/* in assembly known as "as". */
+};
+
+/* X flag determines the mode of extension. */
+enum {
+	X_zero = 0,
+	X_sign = 1
+};
+
+/* Condition codes. */
+enum {
+	CC_always     = 0,	/* condition is true all the time */
+	CC_equal      = 1,	/* if status32.z flag is set */
+	CC_unequal    = 2,	/* if status32.z flag is clear */
+	CC_positive   = 3,	/* if status32.n flag is clear */
+	CC_negative   = 4,	/* if status32.n flag is set */
+	CC_less_u     = 5,	/* less than (unsigned) */
+	CC_less_eq_u  = 14,	/* less than or equal (unsigned) */
+	CC_great_eq_u = 6,	/* greater than or equal (unsigned) */
+	CC_great_u    = 13,	/* greater than (unsigned) */
+	CC_less_s     = 11,	/* less than (signed) */
+	CC_less_eq_s  = 12,	/* less than or equal (signed) */
+	CC_great_eq_s = 10,	/* greater than or equal (signed) */
+	CC_great_s    = 9	/* greater than (signed) */
+};
+
+#define IN_U6_RANGE(x)	((x) <= (0x40      - 1) && (x) >= 0)
+#define IN_S9_RANGE(x)	((x) <= (0x100     - 1) && (x) >= -0x100)
+#define IN_S12_RANGE(x)	((x) <= (0x800     - 1) && (x) >= -0x800)
+#define IN_S21_RANGE(x)	((x) <= (0x100000  - 1) && (x) >= -0x100000)
+#define IN_S25_RANGE(x)	((x) <= (0x1000000 - 1) && (x) >= -0x1000000)
+
+/* Operands in most of the encodings. */
+#define OP_A(x)	((x) & 0x03f)
+#define OP_B(x)	((((x) & 0x07) << 24) | (((x) & 0x38) <<  9))
+#define OP_C(x)	(((x) & 0x03f) << 6)
+#define OP_IMM	(OP_C(ARC_R_IMM))
+#define COND(x)	(OP_A((x) & 31))
+#define FLAG(x)	(((x) & 1) << 15)
+
+/*
+ * The 4-byte encoding of "mov b,c":
+ *
+ * 0010_0bbb 0000_1010 0BBB_cccc cc00_0000
+ *
+ * b:  BBBbbb		destination register
+ * c:  cccccc		source register
+ */
+#define OPC_MOV		0x200a0000
+
+/*
+ * The 4-byte encoding of "mov b,s12" (used for moving small immediates):
+ *
+ * 0010_0bbb 1000_1010 0BBB_ssss ssSS_SSSS
+ *
+ * b:  BBBbbb		destination register
+ * s:  SSSSSSssssss	source immediate (signed)
+ */
+#define OPC_MOVI	0x208a0000
+#define MOVI_S12(x)	((((x) & 0xfc0) >> 6) | (((x) & 0x3f) << 6))
+
+/*
+ * The 4-byte encoding of "mov[.qq] b,u6", used for conditional
+ * moving of even smaller immediates:
+ *
+ * 0010_0bbb 1100_1010 0BBB_cccc cciq_qqqq
+ *
+ * qq: qqqqq		condition code
+ * i:			If set, c is considered a 6-bit immediate, else a reg.
+ *
+ * b:  BBBbbb		destination register
+ * c:  cccccc		source
+ */
+#define OPC_MOV_CC	0x20ca0000
+#define MOV_CC_I	BIT(5)
+#define OPC_MOVU_CC	(OPC_MOV_CC | MOV_CC_I)
+
+/*
+ * The 4-byte encoding of "sexb b,c" (8-bit sign extension):
+ *
+ * 0010_0bbb 0010_1111 0BBB_cccc cc00_0101
+ *
+ * b:  BBBbbb		destination register
+ * c:  cccccc		source register
+ */
+#define OPC_SEXB	0x202f0005
+
+/*
+ * The 4-byte encoding of "sexh b,c" (16-bit sign extension):
+ *
+ * 0010_0bbb 0010_1111 0BBB_cccc cc00_0110
+ *
+ * b:  BBBbbb		destination register
+ * c:  cccccc		source register
+ */
+#define OPC_SEXH	0x202f0006
+
+/*
+ * The 4-byte encoding of "ld[zz][.x][.aa] c,[b,s9]":
+ *
+ * 0001_0bbb ssss_ssss SBBB_0aaz zxcc_cccc
+ *
+ * zz:			size mode
+ * aa:			address write back mode
+ * x:			extension mode
+ *
+ * s9: S_ssss_ssss	9-bit signed number
+ * b:  BBBbbb		source reg for address
+ * c:  cccccc		destination register
+ */
+#define OPC_LOAD	0x10000000
+#define LOAD_X(x)	((x) << 6)
+#define LOAD_ZZ(x)	((x) << 7)
+#define LOAD_AA(x)	((x) << 9)
+#define LOAD_S9(x)	((((x) & 0x0ff) << 16) | (((x) & 0x100) <<  7))
+#define LOAD_C(x)	((x) & 0x03f)
+/* Unsigned and signed loads. */
+#define OPC_LDU		(OPC_LOAD | LOAD_X(X_zero))
+#define OPC_LDS		(OPC_LOAD | LOAD_X(X_sign))
+/* 32-bit load. */
+#define OPC_LD32	(OPC_LDU | LOAD_ZZ(ZZ_4_byte))
+/* "pop reg" is merely a "ld.ab reg,[sp,4]". */
+#define OPC_POP		\
+	(OPC_LD32 | LOAD_AA(AA_post) | LOAD_S9(4) | OP_B(ARC_R_SP))
+
+/*
+ * The 4-byte encoding of "st[zz][.aa] c,[b,s9]":
+ *
+ * 0001_1bbb ssss_ssss SBBB_cccc cc0a_azz0
+ *
+ * zz: zz		size mode
+ * aa: aa		address write back mode
+ *
+ * s9: S_ssss_ssss	9-bit signed number
+ * b:  BBBbbb		source reg for address
+ * c:  cccccc		source reg to be stored
+ */
+#define OPC_STORE	0x18000000
+#define STORE_ZZ(x)	((x) << 1)
+#define STORE_AA(x)	((x) << 3)
+#define STORE_S9(x)	((((x) & 0x0ff) << 16) | (((x) & 0x100) <<  7))
+/* 32-bit store. */
+#define OPC_ST32	(OPC_STORE | STORE_ZZ(ZZ_4_byte))
+/* "push reg" is merely a "st.aw reg,[sp,-4]". */
+#define OPC_PUSH	\
+	(OPC_ST32 | STORE_AA(AA_pre) | STORE_S9(-4) | OP_B(ARC_R_SP))
+
+/*
+ * The 4-byte encoding of "add a,b,c":
+ *
+ * 0010_0bbb 0i00_0000 fBBB_cccc ccaa_aaaa
+ *
+ * f:                   indicates if flags (carry, etc.) should be updated
+ * i:			If set, c is considered a 6-bit immediate, else a reg.
+ *
+ * a:  aaaaaa		result
+ * b:  BBBbbb		the 1st input operand
+ * c:  cccccc		the 2nd input operand
+ */
+#define OPC_ADD		0x20000000
+/* Addition with updating the pertinent flags in "status32" register. */
+#define OPC_ADDF	(OPC_ADD | FLAG(1))
+#define ADDI		BIT(22)
+#define ADDI_U6(x)	OP_C(x)
+#define OPC_ADDI	(OPC_ADD | ADDI)
+#define OPC_ADDIF	(OPC_ADDI | FLAG(1))
+#define OPC_ADD_I	(OPC_ADD | OP_IMM)
+
+/*
+ * The 4-byte encoding of "adc a,b,c" (addition with carry):
+ *
+ * 0010_0bbb 0i00_0001 0BBB_cccc ccaa_aaaa
+ *
+ * i:			if set, c is considered a 6-bit immediate, else a reg.
+ *
+ * a:  aaaaaa		result
+ * b:  BBBbbb		the 1st input operand
+ * c:  cccccc		the 2nd input operand
+ */
+#define OPC_ADC		0x20010000
+#define ADCI		BIT(22)
+#define ADCI_U6(x)	OP_C(x)
+#define OPC_ADCI	(OPC_ADC | ADCI)
+
+/*
+ * The 4-byte encoding of "sub a,b,c":
+ *
+ * 0010_0bbb 0i00_0010 fBBB_cccc ccaa_aaaa
+ *
+ * f:                   indicates if flags (carry, etc.) should be updated
+ * i:			if set, c is considered a 6-bit immediate, else a reg.
+ *
+ * a:  aaaaaa		result
+ * b:  BBBbbb		the 1st input operand
+ * c:  cccccc		the 2nd input operand
+ */
+#define OPC_SUB		0x20020000
+/* Subtraction with updating the pertinent flags in "status32" register. */
+#define OPC_SUBF	(OPC_SUB | FLAG(1))
+#define SUBI		BIT(22)
+#define SUBI_U6(x)	OP_C(x)
+#define OPC_SUBI	(OPC_SUB | SUBI)
+#define OPC_SUB_I	(OPC_SUB | OP_IMM)
+
+/*
+ * The 4-byte encoding of "sbc a,b,c" (subtraction with carry):
+ *
+ * 0010_0bbb 0000_0011 fBBB_cccc ccaa_aaaa
+ *
+ * f:                   indicates if flags (carry, etc.) should be updated
+ *
+ * a:  aaaaaa		result
+ * b:  BBBbbb		the 1st input operand
+ * c:  cccccc		the 2nd input operand
+ */
+#define OPC_SBC		0x20030000
+
+/*
+ * The 4-byte encoding of "cmp[.qq] b,c":
+ *
+ * 0010_0bbb 1100_1100 1BBB_cccc cc0q_qqqq
+ *
+ * qq:	qqqqq		condition code
+ *
+ * b:  BBBbbb		the 1st operand
+ * c:  cccccc		the 2nd operand
+ */
+#define OPC_CMP		0x20cc8000
+
+/*
+ * The 4-byte encoding of "neg a,b":
+ *
+ * 0010_0bbb 0100_1110 0BBB_0000 00aa_aaaa
+ *
+ * a:  aaaaaa		result
+ * b:  BBBbbb		input
+ */
+#define OPC_NEG		0x204e0000
+
+/*
+ * The 4-byte encoding of "mpy a,b,c".
+ * mpy is the signed 32-bit multiplication with the lower 32-bit
+ * of the product as the result.
+ *
+ * 0010_0bbb 0001_1010 0BBB_cccc ccaa_aaaa
+ *
+ * a:  aaaaaa		result
+ * b:  BBBbbb		the 1st input operand
+ * c:  cccccc		the 2nd input operand
+ */
+#define OPC_MPY		0x201a0000
+#define OPC_MPYI	(OPC_MPY | OP_IMM)
+
+/*
+ * The 4-byte encoding of "mpydu a,b,c".
+ * mpydu is the unsigned 32-bit multiplication with the lower 32-bit of
+ * the product in register "a" and the higher 32-bit in register "a+1".
+ *
+ * 0010_1bbb 0001_1001 0BBB_cccc ccaa_aaaa
+ *
+ * a:  aaaaaa		64-bit result in registers (R_a+1,R_a)
+ * b:  BBBbbb		the 1st input operand
+ * c:  cccccc		the 2nd input operand
+ */
+#define OPC_MPYDU	0x28190000
+#define OPC_MPYDUI	(OPC_MPYDU | OP_IMM)
+
+/*
+ * The 4-byte encoding of "divu a,b,c" (unsigned division):
+ *
+ * 0010_1bbb 0000_0101 0BBB_cccc ccaa_aaaa
+ *
+ * a:  aaaaaa		result (quotient)
+ * b:  BBBbbb		the 1st input operand
+ * c:  cccccc		the 2nd input operand (divisor)
+ */
+#define OPC_DIVU	0x28050000
+#define OPC_DIVUI	(OPC_DIVU | OP_IMM)
+
+/*
+ * The 4-byte encoding of "div a,b,c" (signed division):
+ *
+ * 0010_1bbb 0000_0100 0BBB_cccc ccaa_aaaa
+ *
+ * a:  aaaaaa		result (quotient)
+ * b:  BBBbbb		the 1st input operand
+ * c:  cccccc		the 2nd input operand (divisor)
+ */
+#define OPC_DIVS	0x28040000
+#define OPC_DIVSI	(OPC_DIVS | OP_IMM)
+
+/*
+ * The 4-byte encoding of "remu a,b,c" (unsigned remainder):
+ *
+ * 0010_1bbb 0000_1001 0BBB_cccc ccaa_aaaa
+ *
+ * a:  aaaaaa		result (remainder)
+ * b:  BBBbbb		the 1st input operand
+ * c:  cccccc		the 2nd input operand (divisor)
+ */
+#define OPC_REMU	0x28090000
+#define OPC_REMUI	(OPC_REMU | OP_IMM)
+
+/*
+ * The 4-byte encoding of "rem a,b,c" (signed remainder):
+ *
+ * 0010_1bbb 0000_1000 0BBB_cccc ccaa_aaaa
+ *
+ * a:  aaaaaa		result (remainder)
+ * b:  BBBbbb		the 1st input operand
+ * c:  cccccc		the 2nd input operand (divisor)
+ */
+#define OPC_REMS	0x28080000
+#define OPC_REMSI	(OPC_REMS | OP_IMM)
+
+/*
+ * The 4-byte encoding of "and a,b,c":
+ *
+ * 0010_0bbb 0000_0100 fBBB_cccc ccaa_aaaa
+ *
+ * f:                   indicates if zero and negative flags should be updated
+ *
+ * a:  aaaaaa		result
+ * b:  BBBbbb		the 1st input operand
+ * c:  cccccc		the 2nd input operand
+ */
+#define OPC_AND		0x20040000
+#define OPC_ANDI	(OPC_AND | OP_IMM)
+
+/*
+ * The 4-byte encoding of "tst[.qq] b,c".
+ * Checks if the two input operands have any bit set at the same
+ * position.
+ *
+ * 0010_0bbb 1100_1011 1BBB_cccc cc0q_qqqq
+ *
+ * qq:	qqqqq		condition code
+ *
+ * b:  BBBbbb		the 1st input operand
+ * c:  cccccc		the 2nd input operand
+ */
+#define OPC_TST		0x20cb8000
+
+/*
+ * The 4-byte encoding of "or a,b,c":
+ *
+ * 0010_0bbb 0000_0101 0BBB_cccc ccaa_aaaa
+ *
+ * a:  aaaaaa		result
+ * b:  BBBbbb		the 1st input operand
+ * c:  cccccc		the 2nd input operand
+ */
+#define OPC_OR		0x20050000
+#define OPC_ORI		(OPC_OR | OP_IMM)
+
+/*
+ * The 4-byte encoding of "xor a,b,c":
+ *
+ * 0010_0bbb 0000_0111 0BBB_cccc ccaa_aaaa
+ *
+ * a:  aaaaaa		result
+ * b:  BBBbbb		the 1st input operand
+ * c:  cccccc		the 2nd input operand
+ */
+#define OPC_XOR		0x20070000
+#define OPC_XORI	(OPC_XOR | OP_IMM)
+
+/*
+ * The 4-byte encoding of "not b,c":
+ *
+ * 0010_0bbb 0010_1111 0BBB_cccc cc00_1010
+ *
+ * b:  BBBbbb		result
+ * c:  cccccc		input
+ */
+#define OPC_NOT		0x202f000a
+
+/*
+ * The 4-byte encoding of "btst b,u6":
+ *
+ * 0010_0bbb 0101_0001 1BBB_uuuu uu00_0000
+ *
+ * b:  BBBbbb		input number to check
+ * u6: uuuuuu		6-bit unsigned number specifying bit position to check
+ */
+#define OPC_BTSTU6	0x20518000
+#define BTST_U6(x)	(OP_C((x) & 63))
+
+/*
+ * The 4-byte encoding of "asl[.qq] b,b,c" (arithmetic shift left):
+ *
+ * 0010_1bbb 0i00_0000 0BBB_cccc ccaa_aaaa
+ *
+ * i:			if set, c is considered a 5-bit immediate, else a reg.
+ *
+ * b:  BBBbbb		result and the first operand (number to be shifted)
+ * c:  cccccc		amount to be shifted
+ */
+#define OPC_ASL		0x28000000
+#define ASL_I		BIT(22)
+#define ASLI_U6(x)	OP_C((x) & 31)
+#define OPC_ASLI	(OPC_ASL | ASL_I)
+
+/*
+ * The 4-byte encoding of "asr a,b,c" (arithmetic shift right):
+ *
+ * 0010_1bbb 0i00_0010 0BBB_cccc ccaa_aaaa
+ *
+ * i:			if set, c is considered a 6-bit immediate, else a reg.
+ *
+ * a:  aaaaaa		result
+ * b:  BBBbbb		first input:  number to be shifted
+ * c:  cccccc		second input: amount to be shifted
+ */
+#define OPC_ASR		0x28020000
+#define ASR_I		ASL_I
+#define ASRI_U6(x)	ASLI_U6(x)
+#define OPC_ASRI	(OPC_ASR | ASR_I)
+
+/*
+ * The 4-byte encoding of "lsr a,b,c" (logical shift right):
+ *
+ * 0010_1bbb 0i00_0001 0BBB_cccc ccaa_aaaa
+ *
+ * i:			if set, c is considered a 6-bit immediate, else a reg.
+ *
+ * a:  aaaaaa		result
+ * b:  BBBbbb		first input:  number to be shifted
+ * c:  cccccc		second input: amount to be shifted
+ */
+#define OPC_LSR		0x28010000
+#define LSR_I		ASL_I
+#define LSRI_U6(x)	ASLI_U6(x)
+#define OPC_LSRI	(OPC_LSR | LSR_I)
+
+/*
+ * The 4-byte encoding of "swape b,c":
+ *
+ * 0010_1bbb 0010_1111 0bbb_cccc cc00_1001
+ *
+ * b:  BBBbbb		destination register
+ * c:  cccccc		source register
+ */
+#define OPC_SWAPE	0x282f0009
+
+/*
+ * Encoding for jump to an address in register:
+ * j reg_c
+ *
+ * 0010_0000 1110_0000 0000_cccc cc00_0000
+ *
+ * c:  cccccc		register holding the destination address
+ */
+#define OPC_JMP		0x20e00000
+/* Jump to "branch-and-link" register, which effectively is a "return". */
+#define OPC_J_BLINK	(OPC_JMP | OP_C(ARC_R_BLINK))
+
+/*
+ * Encoding for jump-and-link to an address in register:
+ * jl reg_c
+ *
+ * 0010_0000 0010_0010 0000_cccc cc00_0000
+ *
+ * c:  cccccc		register holding the destination address
+ */
+#define OPC_JL		0x20220000
+
+/*
+ * Encoding for (conditional) branch to an offset from the current location
+ * that is word aligned: (PC & 0xffff_fffc) + s21
+ * B[qq] s21
+ *
+ * 0000_0sss ssss_sss0 SSSS_SSSS SS0q_qqqq
+ *
+ * qq:	qqqqq				condition code
+ * s21:	SSSS SSSS_SSss ssss_ssss	The displacement (21-bit signed)
+ *
+ * The displacement is supposed to be 16-bit (2-byte) aligned. Therefore,
+ * it should be a multiple of 2. Hence, there is an implied '0' bit at its
+ * LSB: S_SSSS SSSS_Ssss ssss_sss0
+ */
+#define OPC_BCC		0x00000000
+#define BCC_S21(d)	((((d) & 0x7fe) << 16) | (((d) & 0x1ff800) >> 5))
+
+/*
+ * Encoding for unconditional branch to an offset from the current location
+ * that is word aligned: (PC & 0xffff_fffc) + s25
+ * B s25
+ *
+ * 0000_0sss ssss_sss1 SSSS_SSSS SS00_TTTT
+ *
+ * s25:	TTTT SSSS SSSS_SSss ssss_ssss	The displacement (25-bit signed)
+ *
+ * The displacement is supposed to be 16-bit (2-byte) aligned. Therefore,
+ * it should be a multiple of 2. Hence, there is an implied '0' bit at its
+ * LSB: T TTTS_SSSS SSSS_Ssss ssss_sss0
+ */
+#define OPC_B		0x00010000
+#define B_S25(d)	((((d) & 0x1e00000) >> 21) | BCC_S21(d))
+
+static inline void emit_2_bytes(u8 *buf, u16 bytes)
+{
+	*((u16 *)buf) = bytes;
+}
+
+static inline void emit_4_bytes(u8 *buf, u32 bytes)
+{
+	emit_2_bytes(buf, bytes >> 16);
+	emit_2_bytes(buf + 2, bytes & 0xffff);
+}
+
+static inline u8 bpf_to_arc_size(u8 size)
+{
+	switch (size) {
+	case BPF_B:
+		return ZZ_1_byte;
+	case BPF_H:
+		return ZZ_2_byte;
+	case BPF_W:
+		return ZZ_4_byte;
+	case BPF_DW:
+		return ZZ_8_byte;
+	default:
+		return ZZ_4_byte;
+	}
+}
+
+/************** Encoders (Deal with ARC regs) ************/
+
+/* Move an immediate to register with a 4-byte instruction. */
+static u8 arc_movi_r(u8 *buf, u8 reg, s16 imm)
+{
+	const u32 insn = OPC_MOVI | OP_B(reg) | MOVI_S12(imm);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* rd <- rs */
+static u8 arc_mov_r(u8 *buf, u8 rd, u8 rs)
+{
+	const u32 insn = OPC_MOV | OP_B(rd) | OP_C(rs);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* The emitted code may have different sizes based on "imm". */
+static u8 arc_mov_i(u8 *buf, u8 rd, s32 imm)
+{
+	const u32 insn = OPC_MOV | OP_B(rd) | OP_IMM;
+
+	if (IN_S12_RANGE(imm))
+		return arc_movi_r(buf, rd, imm);
+
+	if (buf) {
+		emit_4_bytes(buf, insn);
+		emit_4_bytes(buf + INSN_len_normal, imm);
+	}
+	return INSN_len_normal + INSN_len_imm;
+}
+
+/* The emitted code will always have the same size (8). */
+static u8 arc_mov_i_fixed(u8 *buf, u8 rd, s32 imm)
+{
+	const u32 insn = OPC_MOV | OP_B(rd) | OP_IMM;
+
+	if (buf) {
+		emit_4_bytes(buf, insn);
+		emit_4_bytes(buf + INSN_len_normal, imm);
+	}
+	return INSN_len_normal + INSN_len_imm;
+}
+
+/* Conditional move. */
+static u8 arc_mov_cc_r(u8 *buf, u8 cc, u8 rd, u8 rs)
+{
+	const u32 insn = OPC_MOV_CC | OP_B(rd) | OP_C(rs) | COND(cc);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* Conditional move of a small immediate to rd. */
+static u8 arc_movu_cc_r(u8 *buf, u8 cc, u8 rd, u8 imm)
+{
+	const u32 insn = OPC_MOVU_CC | OP_B(rd) | OP_C(imm) | COND(cc);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* Sign extension from a byte. */
+static u8 arc_sexb_r(u8 *buf, u8 rd, u8 rs)
+{
+	const u32 insn = OPC_SEXB | OP_B(rd) | OP_C(rs);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* Sign extension from two bytes. */
+static u8 arc_sexh_r(u8 *buf, u8 rd, u8 rs)
+{
+	const u32 insn = OPC_SEXH | OP_B(rd) | OP_C(rs);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* st reg, [reg_mem, off] */
+static u8 arc_st_r(u8 *buf, u8 reg, u8 reg_mem, s16 off, u8 zz)
+{
+	const u32 insn = OPC_STORE | STORE_ZZ(zz) | OP_C(reg) |
+		OP_B(reg_mem) | STORE_S9(off);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* st.aw reg, [sp, -4] */
+static u8 arc_push_r(u8 *buf, u8 reg)
+{
+	const u32 insn = OPC_PUSH | OP_C(reg);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* ld reg, [reg_mem, off] (unsigned) */
+static u8 arc_ld_r(u8 *buf, u8 reg, u8 reg_mem, s16 off, u8 zz)
+{
+	const u32 insn = OPC_LDU | LOAD_ZZ(zz) | LOAD_C(reg) |
+		OP_B(reg_mem) | LOAD_S9(off);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* ld.x reg, [reg_mem, off] (sign extend) */
+static u8 arc_ldx_r(u8 *buf, u8 reg, u8 reg_mem, s16 off, u8 zz)
+{
+	const u32 insn = OPC_LDS | LOAD_ZZ(zz) | LOAD_C(reg) |
+		OP_B(reg_mem) | LOAD_S9(off);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* ld.ab reg,[sp,4] */
+static u8 arc_pop_r(u8 *buf, u8 reg)
+{
+	const u32 insn = OPC_POP | LOAD_C(reg);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* add Ra,Ra,Rc */
+static u8 arc_add_r(u8 *buf, u8 ra, u8 rc)
+{
+	const u32 insn = OPC_ADD | OP_A(ra) | OP_B(ra) | OP_C(rc);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* add.f Ra,Ra,Rc */
+static u8 arc_addf_r(u8 *buf, u8 ra, u8 rc)
+{
+	const u32 insn = OPC_ADDF | OP_A(ra) | OP_B(ra) | OP_C(rc);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* add.f Ra,Ra,u6 */
+static u8 arc_addif_r(u8 *buf, u8 ra, u8 u6)
+{
+	const u32 insn = OPC_ADDIF | OP_A(ra) | OP_B(ra) | ADDI_U6(u6);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* add Ra,Ra,u6 */
+static u8 arc_addi_r(u8 *buf, u8 ra, u8 u6)
+{
+	const u32 insn = OPC_ADDI | OP_A(ra) | OP_B(ra) | ADDI_U6(u6);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* add Ra,Rb,imm */
+static u8 arc_add_i(u8 *buf, u8 ra, u8 rb, s32 imm)
+{
+	const u32 insn = OPC_ADD_I | OP_A(ra) | OP_B(rb);
+
+	if (buf) {
+		emit_4_bytes(buf, insn);
+		emit_4_bytes(buf + INSN_len_normal, imm);
+	}
+	return INSN_len_normal + INSN_len_imm;
+}
+
+/* adc Ra,Ra,Rc */
+static u8 arc_adc_r(u8 *buf, u8 ra, u8 rc)
+{
+	const u32 insn = OPC_ADC | OP_A(ra) | OP_B(ra) | OP_C(rc);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* adc Ra,Ra,u6 */
+static u8 arc_adci_r(u8 *buf, u8 ra, u8 u6)
+{
+	const u32 insn = OPC_ADCI | OP_A(ra) | OP_B(ra) | ADCI_U6(u6);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* sub Ra,Ra,Rc */
+static u8 arc_sub_r(u8 *buf, u8 ra, u8 rc)
+{
+	const u32 insn = OPC_SUB | OP_A(ra) | OP_B(ra) | OP_C(rc);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* sub.f Ra,Ra,Rc */
+static u8 arc_subf_r(u8 *buf, u8 ra, u8 rc)
+{
+	const u32 insn = OPC_SUBF | OP_A(ra) | OP_B(ra) | OP_C(rc);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* sub Ra,Ra,u6 */
+static u8 arc_subi_r(u8 *buf, u8 ra, u8 u6)
+{
+	const u32 insn = OPC_SUBI | OP_A(ra) | OP_B(ra) | SUBI_U6(u6);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* sub Ra,Ra,imm */
+static u8 arc_sub_i(u8 *buf, u8 ra, s32 imm)
+{
+	const u32 insn = OPC_SUB_I | OP_A(ra) | OP_B(ra);
+
+	if (buf) {
+		emit_4_bytes(buf, insn);
+		emit_4_bytes(buf + INSN_len_normal, imm);
+	}
+	return INSN_len_normal + INSN_len_imm;
+}
+
+/* sbc Ra,Ra,Rc */
+static u8 arc_sbc_r(u8 *buf, u8 ra, u8 rc)
+{
+	const u32 insn = OPC_SBC | OP_A(ra) | OP_B(ra) | OP_C(rc);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* cmp Rb,Rc */
+static u8 arc_cmp_r(u8 *buf, u8 rb, u8 rc)
+{
+	const u32 insn = OPC_CMP | OP_B(rb) | OP_C(rc);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/*
+ * cmp.z Rb,Rc
+ *
+ * This "cmp.z" variant of compare instruction is used on lower
+ * 32-bits of register pairs after "cmp"ing their upper parts. If the
+ * upper parts are equal (z), then this one will proceed to check the
+ * rest.
+ */
+static u8 arc_cmpz_r(u8 *buf, u8 rb, u8 rc)
+{
+	const u32 insn = OPC_CMP | OP_B(rb) | OP_C(rc) | CC_equal;
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* neg Ra,Rb */
+static u8 arc_neg_r(u8 *buf, u8 ra, u8 rb)
+{
+	const u32 insn = OPC_NEG | OP_A(ra) | OP_B(rb);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* mpy Ra,Rb,Rc */
+static u8 arc_mpy_r(u8 *buf, u8 ra, u8 rb, u8 rc)
+{
+	const u32 insn = OPC_MPY | OP_A(ra) | OP_B(rb) | OP_C(rc);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* mpy Ra,Rb,imm */
+static u8 arc_mpy_i(u8 *buf, u8 ra, u8 rb, s32 imm)
+{
+	const u32 insn = OPC_MPYI | OP_A(ra) | OP_B(rb);
+
+	if (buf) {
+		emit_4_bytes(buf, insn);
+		emit_4_bytes(buf + INSN_len_normal, imm);
+	}
+	return INSN_len_normal + INSN_len_imm;
+}
+
+/* mpydu Ra,Ra,Rc */
+static u8 arc_mpydu_r(u8 *buf, u8 ra, u8 rc)
+{
+	const u32 insn = OPC_MPYDU | OP_A(ra) | OP_B(ra) | OP_C(rc);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* mpydu Ra,Ra,imm */
+static u8 arc_mpydu_i(u8 *buf, u8 ra, s32 imm)
+{
+	const u32 insn = OPC_MPYDUI | OP_A(ra) | OP_B(ra);
+
+	if (buf) {
+		emit_4_bytes(buf, insn);
+		emit_4_bytes(buf + INSN_len_normal, imm);
+	}
+	return INSN_len_normal + INSN_len_imm;
+}
+
+/* divu Rd,Rd,Rs */
+static u8 arc_divu_r(u8 *buf, u8 rd, u8 rs)
+{
+	const u32 insn = OPC_DIVU | OP_A(rd) | OP_B(rd) | OP_C(rs);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* divu Rd,Rd,imm */
+static u8 arc_divu_i(u8 *buf, u8 rd, s32 imm)
+{
+	const u32 insn = OPC_DIVUI | OP_A(rd) | OP_B(rd);
+
+	if (buf) {
+		emit_4_bytes(buf, insn);
+		emit_4_bytes(buf + INSN_len_normal, imm);
+	}
+	return INSN_len_normal + INSN_len_imm;
+}
+
+/* div Rd,Rd,Rs */
+static u8 arc_divs_r(u8 *buf, u8 rd, u8 rs)
+{
+	const u32 insn = OPC_DIVS | OP_A(rd) | OP_B(rd) | OP_C(rs);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* div Rd,Rd,imm */
+static u8 arc_divs_i(u8 *buf, u8 rd, s32 imm)
+{
+	const u32 insn = OPC_DIVSI | OP_A(rd) | OP_B(rd);
+
+	if (buf) {
+		emit_4_bytes(buf, insn);
+		emit_4_bytes(buf + INSN_len_normal, imm);
+	}
+	return INSN_len_normal + INSN_len_imm;
+}
+
+/* remu Rd,Rd,Rs */
+static u8 arc_remu_r(u8 *buf, u8 rd, u8 rs)
+{
+	const u32 insn = OPC_REMU | OP_A(rd) | OP_B(rd) | OP_C(rs);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* remu Rd,Rd,imm */
+static u8 arc_remu_i(u8 *buf, u8 rd, s32 imm)
+{
+	const u32 insn = OPC_REMUI | OP_A(rd) | OP_B(rd);
+
+	if (buf) {
+		emit_4_bytes(buf, insn);
+		emit_4_bytes(buf + INSN_len_normal, imm);
+	}
+	return INSN_len_normal + INSN_len_imm;
+}
+
+/* rem Rd,Rd,Rs */
+static u8 arc_rems_r(u8 *buf, u8 rd, u8 rs)
+{
+	const u32 insn = OPC_REMS | OP_A(rd) | OP_B(rd) | OP_C(rs);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* rem Rd,Rd,imm */
+static u8 arc_rems_i(u8 *buf, u8 rd, s32 imm)
+{
+	const u32 insn = OPC_REMSI | OP_A(rd) | OP_B(rd);
+
+	if (buf) {
+		emit_4_bytes(buf, insn);
+		emit_4_bytes(buf + INSN_len_normal, imm);
+	}
+	return INSN_len_normal + INSN_len_imm;
+}
+
+/* and Rd,Rd,Rs */
+static u8 arc_and_r(u8 *buf, u8 rd, u8 rs)
+{
+	const u32 insn = OPC_AND | OP_A(rd) | OP_B(rd) | OP_C(rs);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* and Rd,Rd,limm */
+static u8 arc_and_i(u8 *buf, u8 rd, s32 imm)
+{
+	const u32 insn = OPC_ANDI | OP_A(rd) | OP_B(rd);
+
+	if (buf) {
+		emit_4_bytes(buf, insn);
+		emit_4_bytes(buf + INSN_len_normal, imm);
+	}
+	return INSN_len_normal + INSN_len_imm;
+}
+
+/* tst Rd,Rs */
+static u8 arc_tst_r(u8 *buf, u8 rd, u8 rs)
+{
+	const u32 insn = OPC_TST | OP_B(rd) | OP_C(rs);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/*
+ * This particular version, "tst.z ...", is meant to be used after a
+ * "tst" on the low 32-bit of register pairs. If that "tst" is not
+ * zero, then we don't need to test the upper 32-bits lest it sets
+ * the zero flag.
+ */
+static u8 arc_tstz_r(u8 *buf, u8 rd, u8 rs)
+{
+	const u32 insn = OPC_TST | OP_B(rd) | OP_C(rs) | CC_equal;
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+static u8 arc_or_r(u8 *buf, u8 rd, u8 rs1, u8 rs2)
+{
+	const u32 insn = OPC_OR | OP_A(rd) | OP_B(rs1) | OP_C(rs2);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+static u8 arc_or_i(u8 *buf, u8 rd, s32 imm)
+{
+	const u32 insn = OPC_ORI | OP_A(rd) | OP_B(rd);
+
+	if (buf) {
+		emit_4_bytes(buf, insn);
+		emit_4_bytes(buf + INSN_len_normal, imm);
+	}
+	return INSN_len_normal + INSN_len_imm;
+}
+
+static u8 arc_xor_r(u8 *buf, u8 rd, u8 rs)
+{
+	const u32 insn = OPC_XOR | OP_A(rd) | OP_B(rd) | OP_C(rs);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+static u8 arc_xor_i(u8 *buf, u8 rd, s32 imm)
+{
+	const u32 insn = OPC_XORI | OP_A(rd) | OP_B(rd);
+
+	if (buf) {
+		emit_4_bytes(buf, insn);
+		emit_4_bytes(buf + INSN_len_normal, imm);
+	}
+	return INSN_len_normal + INSN_len_imm;
+}
+
+static u8 arc_not_r(u8 *buf, u8 rd, u8 rs)
+{
+	const u32 insn = OPC_NOT | OP_B(rd) | OP_C(rs);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+static u8 arc_btst_i(u8 *buf, u8 rs, u8 imm)
+{
+	const u32 insn = OPC_BTSTU6 | OP_B(rs) | BTST_U6(imm);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+static u8 arc_asl_r(u8 *buf, u8 rd, u8 rs1, u8 rs2)
+{
+	const u32 insn = OPC_ASL | OP_A(rd) | OP_B(rs1) | OP_C(rs2);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+static u8 arc_asli_r(u8 *buf, u8 rd, u8 rs, u8 imm)
+{
+	const u32 insn = OPC_ASLI | OP_A(rd) | OP_B(rs) | ASLI_U6(imm);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+static u8 arc_asr_r(u8 *buf, u8 rd, u8 rs1, u8 rs2)
+{
+	const u32 insn = OPC_ASR | OP_A(rd) | OP_B(rs1) | OP_C(rs2);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+static u8 arc_asri_r(u8 *buf, u8 rd, u8 rs, u8 imm)
+{
+	const u32 insn = OPC_ASRI | OP_A(rd) | OP_B(rs) | ASRI_U6(imm);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+static u8 arc_lsr_r(u8 *buf, u8 rd, u8 rs1, u8 rs2)
+{
+	const u32 insn = OPC_LSR | OP_A(rd) | OP_B(rs1) | OP_C(rs2);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+static u8 arc_lsri_r(u8 *buf, u8 rd, u8 rs, u8 imm)
+{
+	const u32 insn = OPC_LSRI | OP_A(rd) | OP_B(rs) | LSRI_U6(imm);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+static u8 arc_swape_r(u8 *buf, u8 r)
+{
+	const u32 insn = OPC_SWAPE | OP_B(r) | OP_C(r);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+static u8 arc_jmp_return(u8 *buf)
+{
+	if (buf)
+		emit_4_bytes(buf, OPC_J_BLINK);
+	return INSN_len_normal;
+}
+
+static u8 arc_jl(u8 *buf, u8 reg)
+{
+	const u32 insn = OPC_JL | OP_C(reg);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/*
+ * Conditional jump to an address that is max 21 bits away (signed).
+ *
+ * b<cc> s21
+ */
+static u8 arc_bcc(u8 *buf, u8 cc, int offset)
+{
+	const u32 insn = OPC_BCC | BCC_S21(offset) | COND(cc);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/*
+ * Unconditional jump to an address that is max 25 bits away (signed).
+ *
+ * b     s25
+ */
+static u8 arc_b(u8 *buf, s32 offset)
+{
+	const u32 insn = OPC_B | B_S25(offset);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/************* Packers (Deal with BPF_REGs) **************/
+
+u8 zext(u8 *buf, u8 rd)
+{
+	if (rd != BPF_REG_FP)
+		return arc_movi_r(buf, REG_HI(rd), 0);
+	else
+		return 0;
+}
+
+u8 mov_r32(u8 *buf, u8 rd, u8 rs, u8 sign_ext)
+{
+	u8 len = 0;
+
+	if (sign_ext) {
+		if (sign_ext == 8)
+			len = arc_sexb_r(buf, REG_LO(rd), REG_LO(rs));
+		else if (sign_ext == 16)
+			len = arc_sexh_r(buf, REG_LO(rd), REG_LO(rs));
+		else if (sign_ext == 32 && rd != rs)
+			len = arc_mov_r(buf, REG_LO(rd), REG_LO(rs));
+
+		return len;
+	}
+
+	/* Unsigned move. */
+
+	if (rd != rs)
+		len = arc_mov_r(buf, REG_LO(rd), REG_LO(rs));
+
+	return len;
+}
+
+u8 mov_r32_i32(u8 *buf, u8 reg, s32 imm)
+{
+	return arc_mov_i(buf, REG_LO(reg), imm);
+}
+
+u8 mov_r64(u8 *buf, u8 rd, u8 rs, u8 sign_ext)
+{
+	u8 len = 0;
+
+	if (sign_ext) {
+		/* First handle the low 32-bit part. */
+		len = mov_r32(buf, rd, rs, sign_ext);
+
+		/* Now propagate the sign bit of LO to HI. */
+		if (sign_ext == 8 || sign_ext == 16 || sign_ext == 32) {
+			len += arc_asri_r(BUF(buf, len),
+					  REG_HI(rd), REG_LO(rd), 31);
+		}
+
+		return len;
+	}
+
+	/* Unsigned move. */
+
+	if (rd == rs)
+		return 0;
+
+	len = arc_mov_r(buf, REG_LO(rd), REG_LO(rs));
+
+	if (rs != BPF_REG_FP)
+		len += arc_mov_r(BUF(buf, len), REG_HI(rd), REG_HI(rs));
+	/* BPF_REG_FP is mapped to 32-bit "fp" register. */
+	else
+		len += arc_movi_r(BUF(buf, len), REG_HI(rd), 0);
+
+	return len;
+}
+
+/* Sign extend the 32-bit immediate into 64-bit register pair. */
+u8 mov_r64_i32(u8 *buf, u8 reg, s32 imm)
+{
+	u8 len = 0;
+
+	len = arc_mov_i(buf, REG_LO(reg), imm);
+
+	/* BPF_REG_FP is mapped to 32-bit "fp" register. */
+	if (reg != BPF_REG_FP) {
+		if (imm >= 0)
+			len += arc_movi_r(BUF(buf, len), REG_HI(reg), 0);
+		else
+			len += arc_movi_r(BUF(buf, len), REG_HI(reg), -1);
+	}
+
+	return len;
+}
+
+/*
+ * This is merely used for translation of "LD R, IMM64" instructions
+ * of the BPF. These sort of instructions are sometimes used for
+ * relocations. If during the normal pass, the relocation value is
+ * not known, the BPF instruction may look something like:
+ *
+ * LD R <- 0x0000_0001_0000_0001
+ *
+ * Which will nicely translate to two 4-byte ARC instructions:
+ *
+ * mov R_lo, 1               # imm is small enough to be s12
+ * mov R_hi, 1               # same
+ *
+ * However, during the extra pass, the IMM64 will have changed
+ * to the resolved address and looks something like:
+ *
+ * LD R <- 0x0000_0000_1234_5678
+ *
+ * Now, the translated code will require 12 bytes:
+ *
+ * mov R_lo, 0x12345678      # this is an 8-byte instruction
+ * mov R_hi, 0               # still 4 bytes
+ *
+ * Which in practice will result in overwriting the following
+ * instruction. To avoid such cases, we will always emit codes
+ * with fixed sizes.
+ */
+u8 mov_r64_i64(u8 *buf, u8 reg, u32 lo, u32 hi)
+{
+	u8 len;
+
+	len  = arc_mov_i_fixed(buf, REG_LO(reg), lo);
+	len += arc_mov_i_fixed(BUF(buf, len), REG_HI(reg), hi);
+
+	return len;
+}
+
+/*
+ * If the "off"set is too big (doesn't encode as S9) for:
+ *
+ *   {ld,st}  r, [rm, off]
+ *
+ * Then emit:
+ *
+ *   add r10, REG_LO(rm), off
+ *
+ * and make sure that r10 becomes the effective address:
+ *
+ *   {ld,st}  r, [r10, 0]
+ */
+static u8 adjust_mem_access(u8 *buf, s16 *off, u8 size,
+			    u8 rm, u8 *arc_reg_mem)
+{
+	u8 len = 0;
+	*arc_reg_mem = REG_LO(rm);
+
+	if (!IN_S9_RANGE(*off) ||
+	    (size == BPF_DW && !IN_S9_RANGE(*off + 4))) {
+		len += arc_add_i(BUF(buf, len),
+				 REG_LO(JIT_REG_TMP), REG_LO(rm), (u32)(*off));
+		*arc_reg_mem = REG_LO(JIT_REG_TMP);
+		*off = 0;
+	}
+
+	return len;
+}
+
+/* store rs, [rd, off] */
+u8 store_r(u8 *buf, u8 rs, u8 rd, s16 off, u8 size)
+{
+	u8 len, arc_reg_mem;
+
+	len = adjust_mem_access(buf, &off, size, rd, &arc_reg_mem);
+
+	if (size == BPF_DW) {
+		len += arc_st_r(BUF(buf, len), REG_LO(rs), arc_reg_mem,
+				off, ZZ_4_byte);
+		len += arc_st_r(BUF(buf, len), REG_HI(rs), arc_reg_mem,
+				off + 4, ZZ_4_byte);
+	} else {
+		u8 zz = bpf_to_arc_size(size);
+
+		len += arc_st_r(BUF(buf, len), REG_LO(rs), arc_reg_mem,
+				off, zz);
+	}
+
+	return len;
+}
+
+/*
+ * For {8,16,32}-bit stores:
+ *   mov r21, imm
+ *   st  r21, [...]
+ * For 64-bit stores:
+ *   mov r21, imm
+ *   st  r21, [...]
+ *   mov r21, {0,-1}
+ *   st  r21, [...+4]
+ */
+u8 store_i(u8 *buf, s32 imm, u8 rd, s16 off, u8 size)
+{
+	u8 len, arc_reg_mem;
+	/* REG_LO(JIT_REG_TMP) might be used by "adjust_mem_access()". */
+	const u8 arc_rs = REG_HI(JIT_REG_TMP);
+
+	len = adjust_mem_access(buf, &off, size, rd, &arc_reg_mem);
+
+	if (size == BPF_DW) {
+		len += arc_mov_i(BUF(buf, len), arc_rs, imm);
+		len += arc_st_r(BUF(buf, len), arc_rs, arc_reg_mem,
+				off, ZZ_4_byte);
+		imm = (imm >= 0 ? 0 : -1);
+		len += arc_mov_i(BUF(buf, len), arc_rs, imm);
+		len += arc_st_r(BUF(buf, len), arc_rs, arc_reg_mem,
+				off + 4, ZZ_4_byte);
+	} else {
+		u8 zz = bpf_to_arc_size(size);
+
+		len += arc_mov_i(BUF(buf, len), arc_rs, imm);
+		len += arc_st_r(BUF(buf, len), arc_rs, arc_reg_mem, off, zz);
+	}
+
+	return len;
+}
+
+/*
+ * For the calling convention of a little endian machine, the LO part
+ * must be on top of the stack.
+ */
+static u8 push_r64(u8 *buf, u8 reg)
+{
+	u8 len = 0;
+
+#ifdef __LITTLE_ENDIAN
+	/* BPF_REG_FP is mapped to 32-bit "fp" register. */
+	if (reg != BPF_REG_FP)
+		len += arc_push_r(BUF(buf, len), REG_HI(reg));
+	len += arc_push_r(BUF(buf, len), REG_LO(reg));
+#else
+	len += arc_push_r(BUF(buf, len), REG_LO(reg));
+	if (reg != BPF_REG_FP)
+		len += arc_push_r(BUF(buf, len), REG_HI(reg));
+#endif
+
+	return len;
+}
+
+/* load rd, [rs, off] */
+u8 load_r(u8 *buf, u8 rd, u8 rs, s16 off, u8 size, bool sign_ext)
+{
+	u8 len, arc_reg_mem;
+
+	len = adjust_mem_access(buf, &off, size, rs, &arc_reg_mem);
+
+	if (size == BPF_B || size == BPF_H || size == BPF_W) {
+		const u8 zz = bpf_to_arc_size(size);
+
+		/* Use LD.X only if the data size is less than 32-bit. */
+		if (sign_ext && (zz == ZZ_1_byte || zz == ZZ_2_byte)) {
+			len += arc_ldx_r(BUF(buf, len), REG_LO(rd),
+					 arc_reg_mem, off, zz);
+		} else {
+			len += arc_ld_r(BUF(buf, len), REG_LO(rd),
+					arc_reg_mem, off, zz);
+		}
+
+		if (sign_ext) {
+			/* Propagate the sign bit to the higher reg. */
+			len += arc_asri_r(BUF(buf, len),
+					  REG_HI(rd), REG_LO(rd), 31);
+		} else {
+			len += arc_movi_r(BUF(buf, len), REG_HI(rd), 0);
+		}
+	} else if (size == BPF_DW) {
+		/*
+		 * We are about to issue 2 consecutive loads:
+		 *
+		 *   ld rx, [rb, off+0]
+		 *   ld ry, [rb, off+4]
+		 *
+		 * If "rx" and "rb" are the same registers, then the order
+		 * should change to guarantee that "rb" remains intact
+		 * during these 2 operations:
+		 *
+		 *   ld ry, [rb, off+4]
+		 *   ld rx, [rb, off+0]
+		 */
+		if (REG_LO(rd) != arc_reg_mem) {
+			len += arc_ld_r(BUF(buf, len), REG_LO(rd), arc_reg_mem,
+					off, ZZ_4_byte);
+			len += arc_ld_r(BUF(buf, len), REG_HI(rd), arc_reg_mem,
+					off + 4, ZZ_4_byte);
+		} else {
+			len += arc_ld_r(BUF(buf, len), REG_HI(rd), arc_reg_mem,
+					off + 4, ZZ_4_byte);
+			len += arc_ld_r(BUF(buf, len), REG_LO(rd), arc_reg_mem,
+					off, ZZ_4_byte);
+		}
+	}
+
+	return len;
+}
+
+u8 add_r32(u8 *buf, u8 rd, u8 rs)
+{
+	return arc_add_r(buf, REG_LO(rd), REG_LO(rs));
+}
+
+u8 add_r32_i32(u8 *buf, u8 rd, s32 imm)
+{
+	if (IN_U6_RANGE(imm))
+		return arc_addi_r(buf, REG_LO(rd), imm);
+	else
+		return arc_add_i(buf, REG_LO(rd), REG_LO(rd), imm);
+}
+
+u8 add_r64(u8 *buf, u8 rd, u8 rs)
+{
+	u8 len;
+
+	len  = arc_addf_r(buf, REG_LO(rd), REG_LO(rs));
+	len += arc_adc_r(BUF(buf, len), REG_HI(rd), REG_HI(rs));
+	return len;
+}
+
+u8 add_r64_i32(u8 *buf, u8 rd, s32 imm)
+{
+	u8 len;
+
+	if (IN_U6_RANGE(imm)) {
+		len  = arc_addif_r(buf, REG_LO(rd), imm);
+		len += arc_adci_r(BUF(buf, len), REG_HI(rd), 0);
+	} else {
+		len  = mov_r64_i32(buf, JIT_REG_TMP, imm);
+		len += add_r64(BUF(buf, len), rd, JIT_REG_TMP);
+	}
+	return len;
+}
+
+u8 sub_r32(u8 *buf, u8 rd, u8 rs)
+{
+	return arc_sub_r(buf, REG_LO(rd), REG_LO(rs));
+}
+
+u8 sub_r32_i32(u8 *buf, u8 rd, s32 imm)
+{
+	if (IN_U6_RANGE(imm))
+		return arc_subi_r(buf, REG_LO(rd), imm);
+	else
+		return arc_sub_i(buf, REG_LO(rd), imm);
+}
+
+u8 sub_r64(u8 *buf, u8 rd, u8 rs)
+{
+	u8 len;
+
+	len  = arc_subf_r(buf, REG_LO(rd), REG_LO(rs));
+	len += arc_sbc_r(BUF(buf, len), REG_HI(rd), REG_HI(rs));
+	return len;
+}
+
+u8 sub_r64_i32(u8 *buf, u8 rd, s32 imm)
+{
+	u8 len;
+
+	len  = mov_r64_i32(buf, JIT_REG_TMP, imm);
+	len += sub_r64(BUF(buf, len), rd, JIT_REG_TMP);
+	return len;
+}
+
+static u8 cmp_r32(u8 *buf, u8 rd, u8 rs)
+{
+	return arc_cmp_r(buf, REG_LO(rd), REG_LO(rs));
+}
+
+u8 neg_r32(u8 *buf, u8 r)
+{
+	return arc_neg_r(buf, REG_LO(r), REG_LO(r));
+}
+
+/* In a two's complement system, -r is (~r + 1). */
+u8 neg_r64(u8 *buf, u8 r)
+{
+	u8 len;
+
+	len  = arc_not_r(buf, REG_LO(r), REG_LO(r));
+	len += arc_not_r(BUF(buf, len), REG_HI(r), REG_HI(r));
+	len += add_r64_i32(BUF(buf, len), r, 1);
+	return len;
+}
+
+u8 mul_r32(u8 *buf, u8 rd, u8 rs)
+{
+	return arc_mpy_r(buf, REG_LO(rd), REG_LO(rd), REG_LO(rs));
+}
+
+u8 mul_r32_i32(u8 *buf, u8 rd, s32 imm)
+{
+	return arc_mpy_i(buf, REG_LO(rd), REG_LO(rd), imm);
+}
+
+/*
+ * MUL B, C
+ * --------
+ * mpy       t0, B_hi, C_lo
+ * mpy       t1, B_lo, C_hi
+ * mpydu   B_lo, B_lo, C_lo
+ * add     B_hi, B_hi,   t0
+ * add     B_hi, B_hi,   t1
+ */
+u8 mul_r64(u8 *buf, u8 rd, u8 rs)
+{
+	const u8 t0   = REG_LO(JIT_REG_TMP);
+	const u8 t1   = REG_HI(JIT_REG_TMP);
+	const u8 C_lo = REG_LO(rs);
+	const u8 C_hi = REG_HI(rs);
+	const u8 B_lo = REG_LO(rd);
+	const u8 B_hi = REG_HI(rd);
+	u8 len;
+
+	len  = arc_mpy_r(buf, t0, B_hi, C_lo);
+	len += arc_mpy_r(BUF(buf, len), t1, B_lo, C_hi);
+	len += arc_mpydu_r(BUF(buf, len), B_lo, C_lo);
+	len += arc_add_r(BUF(buf, len), B_hi, t0);
+	len += arc_add_r(BUF(buf, len), B_hi, t1);
+
+	return len;
+}
+
+/*
+ * MUL B, imm
+ * ----------
+ *
+ *  To get a 64-bit result from a signed 64x32 multiplication:
+ *
+ *         B_hi             B_lo   *
+ *         sign             imm
+ *  -----------------------------
+ *  HI(B_lo*imm)     LO(B_lo*imm)  +
+ *     B_hi*imm                    +
+ *     B_lo*sign
+ *  -----------------------------
+ *        res_hi           res_lo
+ *
+ * mpy     t1, B_lo, sign(imm)
+ * mpy     t0, B_hi, imm
+ * mpydu B_lo, B_lo, imm
+ * add   B_hi, B_hi,  t0
+ * add   B_hi, B_hi,  t1
+ *
+ * Note: We can't use signed double multiplication, "mpyd", instead of an
+ * unsigned version, "mpydu", and then get rid of the sign adjustments
+ * calculated in "t1". The signed multiplication, "mpyd", will consider
+ * both operands, "B_lo" and "imm", as signed inputs. However, for this
+ * 64x32 multiplication, "B_lo" must be treated as an unsigned number.
+ */
+u8 mul_r64_i32(u8 *buf, u8 rd, s32 imm)
+{
+	const u8 t0   = REG_LO(JIT_REG_TMP);
+	const u8 t1   = REG_HI(JIT_REG_TMP);
+	const u8 B_lo = REG_LO(rd);
+	const u8 B_hi = REG_HI(rd);
+	u8 len = 0;
+
+	if (imm == 1)
+		return 0;
+
+	/* Is the sign-extension of the immediate "-1"? */
+	if (imm < 0)
+		len += arc_neg_r(BUF(buf, len), t1, B_lo);
+
+	len += arc_mpy_i(BUF(buf, len), t0, B_hi, imm);
+	len += arc_mpydu_i(BUF(buf, len), B_lo, imm);
+	len += arc_add_r(BUF(buf, len), B_hi, t0);
+
+	/* Add the "sign*B_lo" part, if necessary. */
+	if (imm < 0)
+		len += arc_add_r(BUF(buf, len), B_hi, t1);
+
+	return len;
+}
+
+u8 div_r32(u8 *buf, u8 rd, u8 rs, bool sign_ext)
+{
+	if (sign_ext)
+		return arc_divs_r(buf, REG_LO(rd), REG_LO(rs));
+	else
+		return arc_divu_r(buf, REG_LO(rd), REG_LO(rs));
+}
+
+u8 div_r32_i32(u8 *buf, u8 rd, s32 imm, bool sign_ext)
+{
+	if (imm == 0)
+		return 0;
+
+	if (sign_ext)
+		return arc_divs_i(buf, REG_LO(rd), imm);
+	else
+		return arc_divu_i(buf, REG_LO(rd), imm);
+}
+
+u8 mod_r32(u8 *buf, u8 rd, u8 rs, bool sign_ext)
+{
+	if (sign_ext)
+		return arc_rems_r(buf, REG_LO(rd), REG_LO(rs));
+	else
+		return arc_remu_r(buf, REG_LO(rd), REG_LO(rs));
+}
+
+u8 mod_r32_i32(u8 *buf, u8 rd, s32 imm, bool sign_ext)
+{
+	if (imm == 0)
+		return 0;
+
+	if (sign_ext)
+		return arc_rems_i(buf, REG_LO(rd), imm);
+	else
+		return arc_remu_i(buf, REG_LO(rd), imm);
+}
+
+u8 and_r32(u8 *buf, u8 rd, u8 rs)
+{
+	return arc_and_r(buf, REG_LO(rd), REG_LO(rs));
+}
+
+u8 and_r32_i32(u8 *buf, u8 rd, s32 imm)
+{
+	return arc_and_i(buf, REG_LO(rd), imm);
+}
+
+u8 and_r64(u8 *buf, u8 rd, u8 rs)
+{
+	u8 len;
+
+	len  = arc_and_r(buf, REG_LO(rd), REG_LO(rs));
+	len += arc_and_r(BUF(buf, len), REG_HI(rd), REG_HI(rs));
+	return len;
+}
+
+u8 and_r64_i32(u8 *buf, u8 rd, s32 imm)
+{
+	u8 len;
+
+	len  = mov_r64_i32(buf, JIT_REG_TMP, imm);
+	len += and_r64(BUF(buf, len), rd, JIT_REG_TMP);
+	return len;
+}
+
+static u8 tst_r32(u8 *buf, u8 rd, u8 rs)
+{
+	return arc_tst_r(buf, REG_LO(rd), REG_LO(rs));
+}
+
+u8 or_r32(u8 *buf, u8 rd, u8 rs)
+{
+	return arc_or_r(buf, REG_LO(rd), REG_LO(rd), REG_LO(rs));
+}
+
+u8 or_r32_i32(u8 *buf, u8 rd, s32 imm)
+{
+	return arc_or_i(buf, REG_LO(rd), imm);
+}
+
+u8 or_r64(u8 *buf, u8 rd, u8 rs)
+{
+	u8 len;
+
+	len  = arc_or_r(buf, REG_LO(rd), REG_LO(rd), REG_LO(rs));
+	len += arc_or_r(BUF(buf, len), REG_HI(rd), REG_HI(rd), REG_HI(rs));
+	return len;
+}
+
+u8 or_r64_i32(u8 *buf, u8 rd, s32 imm)
+{
+	u8 len;
+
+	len  = mov_r64_i32(buf, JIT_REG_TMP, imm);
+	len += or_r64(BUF(buf, len), rd, JIT_REG_TMP);
+	return len;
+}
+
+u8 xor_r32(u8 *buf, u8 rd, u8 rs)
+{
+	return arc_xor_r(buf, REG_LO(rd), REG_LO(rs));
+}
+
+u8 xor_r32_i32(u8 *buf, u8 rd, s32 imm)
+{
+	return arc_xor_i(buf, REG_LO(rd), imm);
+}
+
+u8 xor_r64(u8 *buf, u8 rd, u8 rs)
+{
+	u8 len;
+
+	len  = arc_xor_r(buf, REG_LO(rd), REG_LO(rs));
+	len += arc_xor_r(BUF(buf, len), REG_HI(rd), REG_HI(rs));
+	return len;
+}
+
+u8 xor_r64_i32(u8 *buf, u8 rd, s32 imm)
+{
+	u8 len;
+
+	len  = mov_r64_i32(buf, JIT_REG_TMP, imm);
+	len += xor_r64(BUF(buf, len), rd, JIT_REG_TMP);
+	return len;
+}
+
+/* "asl a,b,c" --> "a = (b << (c & 31))". */
+u8 lsh_r32(u8 *buf, u8 rd, u8 rs)
+{
+	return arc_asl_r(buf, REG_LO(rd), REG_LO(rd), REG_LO(rs));
+}
+
+u8 lsh_r32_i32(u8 *buf, u8 rd, u8 imm)
+{
+	return arc_asli_r(buf, REG_LO(rd), REG_LO(rd), imm);
+}
+
+/*
+ * algorithm
+ * ---------
+ * if (n <= 32)
+ *   to_hi = lo >> (32-n)   # (32-n) is the negate of "n" in a 5-bit width.
+ *   lo <<= n
+ *   hi <<= n
+ *   hi |= to_hi
+ * else
+ *   hi = lo << (n-32)
+ *   lo = 0
+ *
+ * assembly translation for "LSH B, C"
+ * (heavily influenced by ARC gcc)
+ * -----------------------------------
+ * not    t0, C_lo            # The first 3 lines are almost the same as:
+ * lsr    t1, B_lo, 1         #   neg   t0, C_lo
+ * lsr    t1, t1, t0          #   lsr   t1, B_lo, t0   --> t1 is "to_hi"
+ * mov    t0, C_lo*           # with one important difference. In "neg"
+ * asl    B_lo, B_lo, t0      # version, when C_lo=0, t1 becomes B_lo while
+ * asl    B_hi, B_hi, t0      # it should be 0. The "not" approach instead,
+ * or     B_hi, B_hi, t1      # "shift"s t1 once and 31 times, practically
+ * btst   t0, 5               # setting it to 0 when C_lo=0.
+ * mov.ne B_hi, B_lo**
+ * mov.ne B_lo, 0
+ *
+ * *The "mov t0, C_lo" is necessary to cover the cases that C is the same
+ * register as B.
+ *
+ * **ARC performs a shift in this manner: B <<= (C & 31)
+ * For 32<=n<64, "n-32" and "n&31" are the same. Therefore, "B << n" and
+ * "B << (n-32)" yield the same results. e.g. the results of "B << 35" and
+ * "B << 3" are the same.
+ *
+ * The behaviour is undefined for n >= 64.
+ */
+u8 lsh_r64(u8 *buf, u8 rd, u8 rs)
+{
+	const u8 t0   = REG_LO(JIT_REG_TMP);
+	const u8 t1   = REG_HI(JIT_REG_TMP);
+	const u8 C_lo = REG_LO(rs);
+	const u8 B_lo = REG_LO(rd);
+	const u8 B_hi = REG_HI(rd);
+	u8 len;
+
+	len  = arc_not_r(buf, t0, C_lo);
+	len += arc_lsri_r(BUF(buf, len), t1, B_lo, 1);
+	len += arc_lsr_r(BUF(buf, len), t1, t1, t0);
+	len += arc_mov_r(BUF(buf, len), t0, C_lo);
+	len += arc_asl_r(BUF(buf, len), B_lo, B_lo, t0);
+	len += arc_asl_r(BUF(buf, len), B_hi, B_hi, t0);
+	len += arc_or_r(BUF(buf, len), B_hi, B_hi, t1);
+	len += arc_btst_i(BUF(buf, len), t0, 5);
+	len += arc_mov_cc_r(BUF(buf, len), CC_unequal, B_hi, B_lo);
+	len += arc_movu_cc_r(BUF(buf, len), CC_unequal, B_lo, 0);
+
+	return len;
+}
+
+/*
+ * if (n < 32)
+ *   to_hi = B_lo >> 32-n          # extract upper n bits
+ *   lo <<= n
+ *   hi <<=n
+ *   hi |= to_hi
+ * else if (n < 64)
+ *   hi = lo << n-32
+ *   lo = 0
+ */
+u8 lsh_r64_i32(u8 *buf, u8 rd, s32 imm)
+{
+	const u8 t0   = REG_LO(JIT_REG_TMP);
+	const u8 B_lo = REG_LO(rd);
+	const u8 B_hi = REG_HI(rd);
+	const u8 n    = (u8)imm;
+	u8 len = 0;
+
+	if (n == 0) {
+		return 0;
+	} else if (n <= 31) {
+		len  = arc_lsri_r(buf, t0, B_lo, 32 - n);
+		len += arc_asli_r(BUF(buf, len), B_lo, B_lo, n);
+		len += arc_asli_r(BUF(buf, len), B_hi, B_hi, n);
+		len += arc_or_r(BUF(buf, len), B_hi, B_hi, t0);
+	} else if (n <= 63) {
+		len  = arc_asli_r(buf, B_hi, B_lo, n - 32);
+		len += arc_movi_r(BUF(buf, len), B_lo, 0);
+	}
+	/* n >= 64 is undefined behaviour. */
+
+	return len;
+}
+
+/* "lsr a,b,c" --> "a = (b >> (c & 31))". */
+u8 rsh_r32(u8 *buf, u8 rd, u8 rs)
+{
+	return arc_lsr_r(buf, REG_LO(rd), REG_LO(rd), REG_LO(rs));
+}
+
+u8 rsh_r32_i32(u8 *buf, u8 rd, u8 imm)
+{
+	return arc_lsri_r(buf, REG_LO(rd), REG_LO(rd), imm);
+}
+
+/*
+ * For better commentary, see lsh_r64().
+ *
+ * algorithm
+ * ---------
+ * if (n <= 32)
+ *   to_lo = hi << (32-n)
+ *   hi >>= n
+ *   lo >>= n
+ *   lo |= to_lo
+ * else
+ *   lo = hi >> (n-32)
+ *   hi = 0
+ *
+ * RSH    B,C
+ * ----------
+ * not    t0, C_lo
+ * asl    t1, B_hi, 1
+ * asl    t1, t1, t0
+ * mov    t0, C_lo
+ * lsr    B_hi, B_hi, t0
+ * lsr    B_lo, B_lo, t0
+ * or     B_lo, B_lo, t1
+ * btst   t0, 5
+ * mov.ne B_lo, B_hi
+ * mov.ne B_hi, 0
+ */
+u8 rsh_r64(u8 *buf, u8 rd, u8 rs)
+{
+	const u8 t0   = REG_LO(JIT_REG_TMP);
+	const u8 t1   = REG_HI(JIT_REG_TMP);
+	const u8 C_lo = REG_LO(rs);
+	const u8 B_lo = REG_LO(rd);
+	const u8 B_hi = REG_HI(rd);
+	u8 len;
+
+	len  = arc_not_r(buf, t0, C_lo);
+	len += arc_asli_r(BUF(buf, len), t1, B_hi, 1);
+	len += arc_asl_r(BUF(buf, len), t1, t1, t0);
+	len += arc_mov_r(BUF(buf, len), t0, C_lo);
+	len += arc_lsr_r(BUF(buf, len), B_hi, B_hi, t0);
+	len += arc_lsr_r(BUF(buf, len), B_lo, B_lo, t0);
+	len += arc_or_r(BUF(buf, len), B_lo, B_lo, t1);
+	len += arc_btst_i(BUF(buf, len), t0, 5);
+	len += arc_mov_cc_r(BUF(buf, len), CC_unequal, B_lo, B_hi);
+	len += arc_movu_cc_r(BUF(buf, len), CC_unequal, B_hi, 0);
+
+	return len;
+}
+
+/*
+ * if (n < 32)
+ *   to_lo = B_lo << 32-n     # extract lower n bits, right-padded with 32-n 0s
+ *   lo >>=n
+ *   hi >>=n
+ *   hi |= to_lo
+ * else if (n < 64)
+ *   lo = hi >> n-32
+ *   hi = 0
+ */
+u8 rsh_r64_i32(u8 *buf, u8 rd, s32 imm)
+{
+	const u8 t0   = REG_LO(JIT_REG_TMP);
+	const u8 B_lo = REG_LO(rd);
+	const u8 B_hi = REG_HI(rd);
+	const u8 n    = (u8)imm;
+	u8 len = 0;
+
+	if (n == 0) {
+		return 0;
+	} else if (n <= 31) {
+		len  = arc_asli_r(buf, t0, B_hi, 32 - n);
+		len += arc_lsri_r(BUF(buf, len), B_lo, B_lo, n);
+		len += arc_lsri_r(BUF(buf, len), B_hi, B_hi, n);
+		len += arc_or_r(BUF(buf, len), B_lo, B_lo, t0);
+	} else if (n <= 63) {
+		len  = arc_lsri_r(buf, B_lo, B_hi, n - 32);
+		len += arc_movi_r(BUF(buf, len), B_hi, 0);
+	}
+	/* n >= 64 is undefined behaviour. */
+
+	return len;
+}
+
+/* "asr a,b,c" --> "a = (b s>> (c & 31))". */
+u8 arsh_r32(u8 *buf, u8 rd, u8 rs)
+{
+	return arc_asr_r(buf, REG_LO(rd), REG_LO(rd), REG_LO(rs));
+}
+
+u8 arsh_r32_i32(u8 *buf, u8 rd, u8 imm)
+{
+	return arc_asri_r(buf, REG_LO(rd), REG_LO(rd), imm);
+}
+
+/*
+ * For comparison, see rsh_r64().
+ *
+ * algorithm
+ * ---------
+ * if (n <= 32)
+ *   to_lo = hi << (32-n)
+ *   hi s>>= n
+ *   lo  >>= n
+ *   lo |= to_lo
+ * else
+ *   hi_sign = hi s>>31
+ *   lo = hi s>> (n-32)
+ *   hi = hi_sign
+ *
+ * ARSH   B,C
+ * ----------
+ * not    t0, C_lo
+ * asl    t1, B_hi, 1
+ * asl    t1, t1, t0
+ * mov    t0, C_lo
+ * asr    B_hi, B_hi, t0
+ * lsr    B_lo, B_lo, t0
+ * or     B_lo, B_lo, t1
+ * btst   t0, 5
+ * asr    t0, B_hi, 31        # now, t0 = 0 or -1 based on B_hi's sign
+ * mov.ne B_lo, B_hi
+ * mov.ne B_hi, t0
+ */
+u8 arsh_r64(u8 *buf, u8 rd, u8 rs)
+{
+	const u8 t0   = REG_LO(JIT_REG_TMP);
+	const u8 t1   = REG_HI(JIT_REG_TMP);
+	const u8 C_lo = REG_LO(rs);
+	const u8 B_lo = REG_LO(rd);
+	const u8 B_hi = REG_HI(rd);
+	u8 len;
+
+	len  = arc_not_r(buf, t0, C_lo);
+	len += arc_asli_r(BUF(buf, len), t1, B_hi, 1);
+	len += arc_asl_r(BUF(buf, len), t1, t1, t0);
+	len += arc_mov_r(BUF(buf, len), t0, C_lo);
+	len += arc_asr_r(BUF(buf, len), B_hi, B_hi, t0);
+	len += arc_lsr_r(BUF(buf, len), B_lo, B_lo, t0);
+	len += arc_or_r(BUF(buf, len), B_lo, B_lo, t1);
+	len += arc_btst_i(BUF(buf, len), t0, 5);
+	len += arc_asri_r(BUF(buf, len), t0, B_hi, 31);
+	len += arc_mov_cc_r(BUF(buf, len), CC_unequal, B_lo, B_hi);
+	len += arc_mov_cc_r(BUF(buf, len), CC_unequal, B_hi, t0);
+
+	return len;
+}
+
+/*
+ * if (n < 32)
+ *   to_lo = lo << 32-n     # extract lower n bits, right-padded with 32-n 0s
+ *   lo >>=n
+ *   hi s>>=n
+ *   hi |= to_lo
+ * else if (n < 64)
+ *   lo = hi s>> n-32
+ *   hi = (lo[msb] ? -1 : 0)
+ */
+u8 arsh_r64_i32(u8 *buf, u8 rd, s32 imm)
+{
+	const u8 t0   = REG_LO(JIT_REG_TMP);
+	const u8 B_lo = REG_LO(rd);
+	const u8 B_hi = REG_HI(rd);
+	const u8 n    = (u8)imm;
+	u8 len = 0;
+
+	if (n == 0) {
+		return 0;
+	} else if (n <= 31) {
+		len  = arc_asli_r(buf, t0, B_hi, 32 - n);
+		len += arc_lsri_r(BUF(buf, len), B_lo, B_lo, n);
+		len += arc_asri_r(BUF(buf, len), B_hi, B_hi, n);
+		len += arc_or_r(BUF(buf, len), B_lo, B_lo, t0);
+	} else if (n <= 63) {
+		len  = arc_asri_r(buf, B_lo, B_hi, n - 32);
+		len += arc_movi_r(BUF(buf, len), B_hi, -1);
+		len += arc_btst_i(BUF(buf, len), B_lo, 31);
+		len += arc_movu_cc_r(BUF(buf, len), CC_equal, B_hi, 0);
+	}
+	/* n >= 64 is undefined behaviour. */
+
+	return len;
+}
+
+u8 gen_swap(u8 *buf, u8 rd, u8 size, u8 endian, bool force, bool do_zext)
+{
+	u8 len = 0;
+#ifdef __BIG_ENDIAN
+	const u8 host_endian = BPF_FROM_BE;
+#else
+	const u8 host_endian = BPF_FROM_LE;
+#endif
+	if (host_endian != endian || force) {
+		switch (size) {
+		case 16:
+			/*
+			 * r = B4B3_B2B1 << 16 --> r = B2B1_0000
+			 * then, swape(r) would become the desired 0000_B1B2
+			 */
+			len = arc_asli_r(buf, REG_LO(rd), REG_LO(rd), 16);
+			fallthrough;
+		case 32:
+			len += arc_swape_r(BUF(buf, len), REG_LO(rd));
+			if (do_zext)
+				len += zext(BUF(buf, len), rd);
+			break;
+		case 64:
+			/*
+			 * swap "hi" and "lo":
+			 *   hi ^= lo;
+			 *   lo ^= hi;
+			 *   hi ^= lo;
+			 * and then swap the bytes in "hi" and "lo".
+			 */
+			len  = arc_xor_r(buf, REG_HI(rd), REG_LO(rd));
+			len += arc_xor_r(BUF(buf, len), REG_LO(rd), REG_HI(rd));
+			len += arc_xor_r(BUF(buf, len), REG_HI(rd), REG_LO(rd));
+			len += arc_swape_r(BUF(buf, len), REG_LO(rd));
+			len += arc_swape_r(BUF(buf, len), REG_HI(rd));
+			break;
+		default:
+			/* The caller must have handled this. */
+			break;
+		}
+	} else {
+		/*
+		 * If the same endianness, there's not much to do other
+		 * than zeroing out the upper bytes based on the "size".
+		 */
+		switch (size) {
+		case 16:
+			len = arc_and_i(buf, REG_LO(rd), 0xffff);
+			fallthrough;
+		case 32:
+			if (do_zext)
+				len += zext(BUF(buf, len), rd);
+			break;
+		case 64:
+			break;
+		default:
+			/* The caller must have handled this. */
+			break;
+		}
+	}
+
+	return len;
+}
+
+/*
+ * To create a frame, all that is needed is:
+ *
+ *  push fp
+ *  mov  fp, sp
+ *  sub  sp, <frame_size>
+ *
+ * "push fp" is taken care of separately while saving the clobbered registers.
+ * All that remains is copying SP value to FP and shrinking SP's address space
+ * for any possible function call to come.
+ */
+static inline u8 frame_create(u8 *buf, u16 size)
+{
+	u8 len;
+
+	len = arc_mov_r(buf, ARC_R_FP, ARC_R_SP);
+	if (IN_U6_RANGE(size))
+		len += arc_subi_r(BUF(buf, len), ARC_R_SP, size);
+	else
+		len += arc_sub_i(BUF(buf, len), ARC_R_SP, size);
+	return len;
+}
+
+/*
+ * mov sp, fp
+ *
+ * The value of SP upon entering was copied to FP.
+ */
+static inline u8 frame_restore(u8 *buf)
+{
+	return arc_mov_r(buf, ARC_R_SP, ARC_R_FP);
+}
+
+/*
+ * Going from a JITed code to the native caller:
+ *
+ * mov ARC_ABI_RET_lo, BPF_REG_0_lo     # r0 <- r8
+ * mov ARC_ABI_RET_hi, BPF_REG_0_hi     # r1 <- r9
+ */
+static u8 bpf_to_arc_return(u8 *buf)
+{
+	u8 len;
+
+	len  = arc_mov_r(buf, ARC_R_0, REG_LO(BPF_REG_0));
+	len += arc_mov_r(BUF(buf, len), ARC_R_1, REG_HI(BPF_REG_0));
+	return len;
+}
+
+/*
+ * Coming back from an external (in-kernel) function to the JITed code:
+ *
+ * mov ARC_ABI_RET_lo, BPF_REG_0_lo     # r8 <- r0
+ * mov ARC_ABI_RET_hi, BPF_REG_0_hi     # r9 <- r1
+ */
+u8 arc_to_bpf_return(u8 *buf)
+{
+	u8 len;
+
+	len  = arc_mov_r(buf, REG_LO(BPF_REG_0), ARC_R_0);
+	len += arc_mov_r(BUF(buf, len), REG_HI(BPF_REG_0), ARC_R_1);
+	return len;
+}
+
+/*
+ * This translation leads to:
+ *
+ *   mov r10, addr                # always an 8-byte instruction
+ *   jl  [r10]
+ *
+ * The length of the "mov" must be fixed (8), otherwise it may diverge
+ * during the normal and extra passes:
+ *
+ *          normal pass                  extra pass
+ *
+ *   180:  mov     r10,0        |   180:  mov     r10,0x700578d8
+ *   184:  jl      [r10]        |   188:  jl      [r10]
+ *   188:  add.f   r16,r16,0x1  |   18c:  adc     r17,r17,0
+ *   18c:  adc     r17,r17,0    |
+ *
+ * In the above example, the change from "r10 <- 0" to "r10 <- 0x700578d8"
+ * has led to an increase in the length of the "mov" instruction.
+ * Inadvertently, that caused the loss of the "add.f" instruction.
+ */
+static u8 jump_and_link(u8 *buf, u32 addr)
+{
+	u8 len;
+
+	len  = arc_mov_i_fixed(buf, REG_LO(JIT_REG_TMP), addr);
+	len += arc_jl(BUF(buf, len), REG_LO(JIT_REG_TMP));
+	return len;
+}
+
+/*
+ * This function determines which ARC registers must be saved and restored.
+ * It does so by looking into:
+ *
+ * "bpf_reg": The clobbered (destination) BPF register
+ * "is_call": Indicator if the current instruction is a call
+ *
+ * When a register of interest is clobbered, its corresponding bit position
+ * in return value, "usage", is set to true.
+ */
+u32 mask_for_used_regs(u8 bpf_reg, bool is_call)
+{
+	u32 usage = 0;
+
+	/* BPF registers that must be saved. */
+	if (bpf_reg >= BPF_REG_6 && bpf_reg <= BPF_REG_9) {
+		usage |= BIT(REG_LO(bpf_reg));
+		usage |= BIT(REG_HI(bpf_reg));
+	/*
+	 * Using the frame pointer register implies that it should
+	 * be saved and reinitialised with the current frame data.
+	 */
+	} else if (bpf_reg == BPF_REG_FP) {
+		usage |= BIT(REG_LO(BPF_REG_FP));
+	/* Could there be some ARC registers that must to be saved? */
+	} else {
+		if (REG_LO(bpf_reg) >= ARC_CALLEE_SAVED_REG_FIRST &&
+		    REG_LO(bpf_reg) <= ARC_CALLEE_SAVED_REG_LAST)
+			usage |= BIT(REG_LO(bpf_reg));
+
+		if (REG_HI(bpf_reg) >= ARC_CALLEE_SAVED_REG_FIRST &&
+		    REG_HI(bpf_reg) <= ARC_CALLEE_SAVED_REG_LAST)
+			usage |= BIT(REG_HI(bpf_reg));
+	}
+
+	/* A "call" indicates that ARC's "blink" reg must be saved. */
+	usage |= is_call ? BIT(ARC_R_BLINK) : 0;
+
+	return usage;
+}
+
+/*
+ * push blink             # if blink is marked as clobbered
+ * push r[0-n]            # if r[i] is marked as clobbered
+ * push fp                # if fp is marked as clobbered
+ * mov  fp, sp            # if frame_size > 0 (clobbers fp)
+ * sub  sp, <frame_size>  # same as above
+ */
+u8 arc_prologue(u8 *buf, u32 usage, u16 frame_size)
+{
+	u8 len = 0;
+	u32 gp_regs = 0;
+
+	/* Deal with blink first. */
+	if (usage & BIT(ARC_R_BLINK))
+		len += arc_push_r(BUF(buf, len), ARC_R_BLINK);
+
+	gp_regs = usage & ~(BIT(ARC_R_BLINK) | BIT(ARC_R_FP));
+	while (gp_regs) {
+		u8 reg = __builtin_ffs(gp_regs) - 1;
+
+		len += arc_push_r(BUF(buf, len), reg);
+		gp_regs &= ~BIT(reg);
+	}
+
+	/* Deal with fp last. */
+	if ((usage & BIT(ARC_R_FP)) || frame_size > 0)
+		len += arc_push_r(BUF(buf, len), ARC_R_FP);
+
+	if (frame_size > 0)
+		len += frame_create(BUF(buf, len), frame_size);
+
+#ifdef ARC_BPF_JIT_DEBUG
+	if ((usage & BIT(ARC_R_FP)) && frame_size == 0) {
+		pr_err("FP is being saved while there is no frame.");
+		BUG();
+	}
+#endif
+
+	return len;
+}
+
+/*
+ * mov  sp, fp            # if frame_size > 0
+ * pop  fp                # if fp is marked as clobbered
+ * pop  r[n-0]            # if r[i] is marked as clobbered
+ * pop  blink             # if blink is marked as clobbered
+ * mov  r0, r8            # always: ABI_return <- BPF_return
+ * mov  r1, r9            # continuation of above
+ * j    [blink]           # always
+ *
+ * "fp being marked as clobbered" and "frame_size > 0" are the two sides of
+ * the same coin.
+ */
+u8 arc_epilogue(u8 *buf, u32 usage, u16 frame_size)
+{
+	u32 len = 0;
+	u32 gp_regs = 0;
+
+#ifdef ARC_BPF_JIT_DEBUG
+	if ((usage & BIT(ARC_R_FP)) && frame_size == 0) {
+		pr_err("FP is being saved while there is no frame.");
+		BUG();
+	}
+#endif
+
+	if (frame_size > 0)
+		len += frame_restore(BUF(buf, len));
+
+	/* Deal with fp first. */
+	if ((usage & BIT(ARC_R_FP)) || frame_size > 0)
+		len += arc_pop_r(BUF(buf, len), ARC_R_FP);
+
+	gp_regs = usage & ~(BIT(ARC_R_BLINK) | BIT(ARC_R_FP));
+	while (gp_regs) {
+		/* "usage" is 32-bit, each bit indicating an ARC register. */
+		u8 reg = 31 - __builtin_clz(gp_regs);
+
+		len += arc_pop_r(BUF(buf, len), reg);
+		gp_regs &= ~BIT(reg);
+	}
+
+	/* Deal with blink last. */
+	if (usage & BIT(ARC_R_BLINK))
+		len += arc_pop_r(BUF(buf, len), ARC_R_BLINK);
+
+	/* Wrap up the return value and jump back to the caller. */
+	len += bpf_to_arc_return(BUF(buf, len));
+	len += arc_jmp_return(BUF(buf, len));
+
+	return len;
+}
+
+/*
+ * For details on the algorithm, see the comments of "gen_jcc_64()".
+ *
+ * This data structure is holding information for jump translations.
+ *
+ * jit_off: How many bytes into the current JIT address, "b"ranch insn. occurs
+ * cond: The condition that the ARC branch instruction must use
+ *
+ * e.g.:
+ *
+ * BPF_JGE  R1, R0, @target
+ * ------------------------
+ *            |
+ *            v
+ * 0x1000: cmp  r3, r1     # 0x1000 is the JIT address for "BPF_JGE ..." insn
+ * 0x1004: bhi  @target    # first jump (branch higher)
+ * 0x1008: blo  @end       # second jump acting as a skip (end is 0x1014)
+ * 0x100C: cmp  r2, r0     # the lower 32 bits are evaluated
+ * 0x1010: bhs  @target    # third jump (branch higher or same)
+ * 0x1014: ...
+ *
+ * The jit_off(set) of the "bhi" is 4 bytes.
+ * The cond(ition) for the "bhi" is "CC_great_u".
+ *
+ * The jit_off(set) is necessary for calculating the exact displacement
+ * to the "target" address:
+ *
+ * jit_address + jit_off(set) - @target
+ * 0x1000      + 4            - @target
+ */
+#define JCC64_NR_OF_JMPS 3	/* Number of jumps in jcc64 template. */
+#define JCC64_INSNS_TO_END 3	/* Number of insn. inclusive the 2nd jmp to end. */
+#define JCC64_SKIP_JMP 1	/* Index of the "skip" jump to "end". */
+static const struct {
+	/*
+	 * "jit_off" is common between all "jmp[]" and is coupled with
+	 * "cond" of each "jmp[]" instance. e.g.:
+	 *
+	 * arcv2_64_jccs.jit_off[1]
+	 * arcv2_64_jccs.jmp[ARC_CC_UGT].cond[1]
+	 *
+	 * Are indicating that the second jump in JITed code of "UGT"
+	 * is at offset "jit_off[1]" while its condition is "cond[1]".
+	 */
+	u8 jit_off[JCC64_NR_OF_JMPS];
+
+	struct {
+		u8 cond[JCC64_NR_OF_JMPS];
+	} jmp[ARC_CC_SLE + 1];
+} arcv2_64_jccs = {
+	.jit_off = {
+		INSN_len_normal * 1,
+		INSN_len_normal * 2,
+		INSN_len_normal * 4
+	},
+	/*
+	 *   cmp  rd_hi, rs_hi
+	 *   bhi  @target         # 1: u>
+	 *   blo  @end            # 2: u<
+	 *   cmp  rd_lo, rs_lo
+	 *   bhi  @target         # 3: u>
+	 * end:
+	 */
+	.jmp[ARC_CC_UGT] = {
+		.cond = {CC_great_u, CC_less_u, CC_great_u}
+	},
+	/*
+	 *   cmp  rd_hi, rs_hi
+	 *   bhi  @target         # 1: u>
+	 *   blo  @end            # 2: u<
+	 *   cmp  rd_lo, rs_lo
+	 *   bhs  @target         # 3: u>=
+	 * end:
+	 */
+	.jmp[ARC_CC_UGE] = {
+		.cond = {CC_great_u, CC_less_u, CC_great_eq_u}
+	},
+	/*
+	 *   cmp  rd_hi, rs_hi
+	 *   blo  @target         # 1: u<
+	 *   bhi  @end            # 2: u>
+	 *   cmp  rd_lo, rs_lo
+	 *   blo  @target         # 3: u<
+	 * end:
+	 */
+	.jmp[ARC_CC_ULT] = {
+		.cond = {CC_less_u, CC_great_u, CC_less_u}
+	},
+	/*
+	 *   cmp  rd_hi, rs_hi
+	 *   blo  @target         # 1: u<
+	 *   bhi  @end            # 2: u>
+	 *   cmp  rd_lo, rs_lo
+	 *   bls  @target         # 3: u<=
+	 * end:
+	 */
+	.jmp[ARC_CC_ULE] = {
+		.cond = {CC_less_u, CC_great_u, CC_less_eq_u}
+	},
+	/*
+	 *   cmp  rd_hi, rs_hi
+	 *   bgt  @target         # 1: s>
+	 *   blt  @end            # 2: s<
+	 *   cmp  rd_lo, rs_lo
+	 *   bhi  @target         # 3: u>
+	 * end:
+	 */
+	.jmp[ARC_CC_SGT] = {
+		.cond = {CC_great_s, CC_less_s, CC_great_u}
+	},
+	/*
+	 *   cmp  rd_hi, rs_hi
+	 *   bgt  @target         # 1: s>
+	 *   blt  @end            # 2: s<
+	 *   cmp  rd_lo, rs_lo
+	 *   bhs  @target         # 3: u>=
+	 * end:
+	 */
+	.jmp[ARC_CC_SGE] = {
+		.cond = {CC_great_s, CC_less_s, CC_great_eq_u}
+	},
+	/*
+	 *   cmp  rd_hi, rs_hi
+	 *   blt  @target         # 1: s<
+	 *   bgt  @end            # 2: s>
+	 *   cmp  rd_lo, rs_lo
+	 *   blo  @target         # 3: u<
+	 * end:
+	 */
+	.jmp[ARC_CC_SLT] = {
+		.cond = {CC_less_s, CC_great_s, CC_less_u}
+	},
+	/*
+	 *   cmp  rd_hi, rs_hi
+	 *   blt  @target         # 1: s<
+	 *   bgt  @end            # 2: s>
+	 *   cmp  rd_lo, rs_lo
+	 *   bls  @target         # 3: u<=
+	 * end:
+	 */
+	.jmp[ARC_CC_SLE] = {
+		.cond = {CC_less_s, CC_great_s, CC_less_eq_u}
+	}
+};
+
+/*
+ * The displacement (offset) for ARC's "b"ranch instruction is the distance
+ * from the aligned version of _current_ instruction (PCL) to the target
+ * instruction:
+ *
+ * DISP = TARGET - PCL          # PCL is the word aligned PC
+ */
+static inline s32 get_displacement(u32 curr_off, u32 targ_off)
+{
+	return (s32)(targ_off - (curr_off & ~3L));
+}
+
+/*
+ * "disp"lacement should be:
+ *
+ * 1. 16-bit aligned.
+ * 2. fit in S25, because no "condition code" is supposed to be encoded.
+ */
+static inline bool is_valid_far_disp(s32 disp)
+{
+	return (!(disp & 1) && IN_S25_RANGE(disp));
+}
+
+/*
+ * "disp"lacement should be:
+ *
+ * 1. 16-bit aligned.
+ * 2. fit in S21, because "condition code" is supposed to be encoded too.
+ */
+static inline bool is_valid_near_disp(s32 disp)
+{
+	return (!(disp & 1) && IN_S21_RANGE(disp));
+}
+
+/*
+ * cmp        rd_hi, rs_hi
+ * cmp.z      rd_lo, rs_lo
+ * b{eq,ne}   @target
+ *   |  |
+ *   |  `-->  "eq" param is false (JNE)
+ *   `----->  "eq" param is true  (JEQ)
+ */
+static int gen_j_eq_64(u8 *buf, u8 rd, u8 rs, bool eq,
+		       u32 curr_off, u32 targ_off)
+{
+	s32 disp;
+	u8 len = 0;
+
+	len += arc_cmp_r(BUF(buf, len), REG_HI(rd), REG_HI(rs));
+	len += arc_cmpz_r(BUF(buf, len), REG_LO(rd), REG_LO(rs));
+	disp = get_displacement(curr_off + len, targ_off);
+	len += arc_bcc(BUF(buf, len), eq ? CC_equal : CC_unequal, disp);
+
+	return len;
+}
+
+/*
+ * tst   rd_hi, rs_hi
+ * tst.z rd_lo, rs_lo
+ * bne   @target
+ */
+static u8 gen_jset_64(u8 *buf, u8 rd, u8 rs, u32 curr_off, u32 targ_off)
+{
+	u8 len = 0;
+	s32 disp;
+
+	len += arc_tst_r(BUF(buf, len), REG_HI(rd), REG_HI(rs));
+	len += arc_tstz_r(BUF(buf, len), REG_LO(rd), REG_LO(rs));
+	disp = get_displacement(curr_off + len, targ_off);
+	len += arc_bcc(BUF(buf, len), CC_unequal, disp);
+
+	return len;
+}
+
+/*
+ * Verify if all the jumps for a JITed jcc64 operation are valid,
+ * by consulting the data stored at "arcv2_64_jccs".
+ */
+static bool check_jcc_64(u32 curr_off, u32 targ_off, u8 cond)
+{
+	size_t i;
+
+	if (cond >= ARC_CC_LAST)
+		return false;
+
+	for (i = 0; i < JCC64_NR_OF_JMPS; i++) {
+		u32 from, to;
+
+		from = curr_off + arcv2_64_jccs.jit_off[i];
+		/* for the 2nd jump, we jump to the end of block. */
+		if (i != JCC64_SKIP_JMP)
+			to = targ_off;
+		else
+			to = from + (JCC64_INSNS_TO_END * INSN_len_normal);
+		/* There is a "cc" in the instruction, so a "near" jump. */
+		if (!is_valid_near_disp(get_displacement(from, to)))
+			return false;
+	}
+
+	return true;
+}
+
+/* Can the jump from "curr_off" to "targ_off" actually happen? */
+bool check_jmp_64(u32 curr_off, u32 targ_off, u8 cond)
+{
+	s32 disp;
+
+	switch (cond) {
+	case ARC_CC_UGT:
+	case ARC_CC_UGE:
+	case ARC_CC_ULT:
+	case ARC_CC_ULE:
+	case ARC_CC_SGT:
+	case ARC_CC_SGE:
+	case ARC_CC_SLT:
+	case ARC_CC_SLE:
+		return check_jcc_64(curr_off, targ_off, cond);
+	case ARC_CC_EQ:
+	case ARC_CC_NE:
+	case ARC_CC_SET:
+		/*
+		 * The "jump" for the JITed BPF_J{SET,EQ,NE} is actually the
+		 * 3rd instruction. See comments of "gen_j{set,_eq}_64()".
+		 */
+		curr_off += 2 * INSN_len_normal;
+		disp = get_displacement(curr_off, targ_off);
+		/* There is a "cc" field in the issued instruction. */
+		return is_valid_near_disp(disp);
+	case ARC_CC_AL:
+		disp = get_displacement(curr_off, targ_off);
+		return is_valid_far_disp(disp);
+	default:
+		return false;
+	}
+}
+
+/*
+ * The template for the 64-bit jumps with the following BPF conditions
+ *
+ * u< u<= u> u>= s< s<= s> s>=
+ *
+ * Looks like below:
+ *
+ *   cmp   rd_hi, rs_hi
+ *   b<c1> @target
+ *   b<c2> @end
+ *   cmp   rd_lo, rs_lo   # if execution reaches here, r{d,s}_hi are equal
+ *   b<c3> @target
+ * end:
+ *
+ * "c1" is the condition that JIT is handling minus the equality part.
+ * For instance if we have to translate an "unsigned greater or equal",
+ * then "c1" will be "unsigned greater". We won't know about equality
+ * until all 64-bits of data (higeher and lower registers) are processed.
+ *
+ * "c2" is the counter logic of "c1". For instance, if "c1" is originated
+ * from "s>", then "c2" would be "s<". Notice that equality doesn't play
+ * a role here either, because the lower 32 bits are not processed yet.
+ *
+ * "c3" is the unsigned version of "c1", no matter if the BPF condition
+ * was signed or unsigned. An unsigned version is necessary, because the
+ * MSB of the lower 32 bits does not reflect a sign in the whole 64-bit
+ * scheme. Otherwise, 64-bit comparisons like
+ * (0x0000_0000,0x8000_0000) s>= (0x0000_0000,0x0000_0000)
+ * would yield an incorrect result. Finally, if there is an equality
+ * check in the BPF condition, it will be reflected in "c3".
+ *
+ * You can find all the instances of this template where the
+ * "arcv2_64_jccs" is getting initialised.
+ */
+static u8 gen_jcc_64(u8 *buf, u8 rd, u8 rs, u8 cond,
+		     u32 curr_off, u32 targ_off)
+{
+	s32 disp;
+	u32 end_off;
+	const u8 *cc = arcv2_64_jccs.jmp[cond].cond;
+	u8 len = 0;
+
+	/* cmp rd_hi, rs_hi */
+	len += arc_cmp_r(buf, REG_HI(rd), REG_HI(rs));
+
+	/* b<c1> @target */
+	disp = get_displacement(curr_off + len, targ_off);
+	len += arc_bcc(BUF(buf, len), cc[0], disp);
+
+	/* b<c2> @end */
+	end_off = curr_off + len + (JCC64_INSNS_TO_END * INSN_len_normal);
+	disp = get_displacement(curr_off + len, end_off);
+	len += arc_bcc(BUF(buf, len), cc[1], disp);
+
+	/* cmp rd_lo, rs_lo */
+	len += arc_cmp_r(BUF(buf, len), REG_LO(rd), REG_LO(rs));
+
+	/* b<c3> @target */
+	disp = get_displacement(curr_off + len, targ_off);
+	len += arc_bcc(BUF(buf, len), cc[2], disp);
+
+	return len;
+}
+
+/*
+ * This function only applies the necessary logic to make the proper
+ * translations. All the sanity checks must have already been done
+ * by calling the check_jmp_64().
+ */
+u8 gen_jmp_64(u8 *buf, u8 rd, u8 rs, u8 cond, u32 curr_off, u32 targ_off)
+{
+	u8 len = 0;
+	bool eq = false;
+	s32 disp;
+
+	switch (cond) {
+	case ARC_CC_AL:
+		disp = get_displacement(curr_off, targ_off);
+		len = arc_b(buf, disp);
+		break;
+	case ARC_CC_UGT:
+	case ARC_CC_UGE:
+	case ARC_CC_ULT:
+	case ARC_CC_ULE:
+	case ARC_CC_SGT:
+	case ARC_CC_SGE:
+	case ARC_CC_SLT:
+	case ARC_CC_SLE:
+		len = gen_jcc_64(buf, rd, rs, cond, curr_off, targ_off);
+		break;
+	case ARC_CC_EQ:
+		eq = true;
+		fallthrough;
+	case ARC_CC_NE:
+		len = gen_j_eq_64(buf, rd, rs, eq, curr_off, targ_off);
+		break;
+	case ARC_CC_SET:
+		len = gen_jset_64(buf, rd, rs, curr_off, targ_off);
+		break;
+	default:
+#ifdef ARC_BPF_JIT_DEBUG
+		pr_err("64-bit jump condition is not known.");
+		BUG();
+#endif
+	}
+	return len;
+}
+
+/*
+ * The condition codes to use when generating JIT instructions
+ * for 32-bit jumps.
+ *
+ * The "ARC_CC_AL" index is not really used by the code, but it
+ * is here for the sake of completeness.
+ *
+ * The "ARC_CC_SET" becomes "CC_unequal" because of the "tst"
+ * instruction that precedes the conditional branch.
+ */
+static const u8 arcv2_32_jmps[ARC_CC_LAST] = {
+	[ARC_CC_UGT] = CC_great_u,
+	[ARC_CC_UGE] = CC_great_eq_u,
+	[ARC_CC_ULT] = CC_less_u,
+	[ARC_CC_ULE] = CC_less_eq_u,
+	[ARC_CC_SGT] = CC_great_s,
+	[ARC_CC_SGE] = CC_great_eq_s,
+	[ARC_CC_SLT] = CC_less_s,
+	[ARC_CC_SLE] = CC_less_eq_s,
+	[ARC_CC_AL]  = CC_always,
+	[ARC_CC_EQ]  = CC_equal,
+	[ARC_CC_NE]  = CC_unequal,
+	[ARC_CC_SET] = CC_unequal
+};
+
+/* Can the jump from "curr_off" to "targ_off" actually happen? */
+bool check_jmp_32(u32 curr_off, u32 targ_off, u8 cond)
+{
+	u8 addendum;
+	s32 disp;
+
+	if (cond >= ARC_CC_LAST)
+		return false;
+
+	/*
+	 * The unconditional jump happens immediately, while the rest
+	 * are either preceded by a "cmp" or "tst" instruction.
+	 */
+	addendum = (cond == ARC_CC_AL) ? 0 : INSN_len_normal;
+	disp = get_displacement(curr_off + addendum, targ_off);
+
+	if (cond == ARC_CC_AL)
+		return is_valid_far_disp(disp);
+	else
+		return is_valid_near_disp(disp);
+}
+
+/*
+ * The JITed code for 32-bit (conditional) branches:
+ *
+ * ARC_CC_AL  @target
+ *   b @jit_targ_addr
+ *
+ * ARC_CC_SET rd, rs, @target
+ *   tst rd, rs
+ *   bnz @jit_targ_addr
+ *
+ * ARC_CC_xx  rd, rs, @target
+ *   cmp rd, rs
+ *   b<cc> @jit_targ_addr            # cc = arcv2_32_jmps[xx]
+ */
+u8 gen_jmp_32(u8 *buf, u8 rd, u8 rs, u8 cond, u32 curr_off, u32 targ_off)
+{
+	s32 disp;
+	u8 len = 0;
+
+	/*
+	 * Although this must have already been checked by "check_jmp_32()",
+	 * we're not going to risk accessing "arcv2_32_jmps" array without
+	 * the boundary check.
+	 */
+	if (cond >= ARC_CC_LAST) {
+#ifdef ARC_BPF_JIT_DEBUG
+		pr_err("32-bit jump condition is not known.");
+		BUG();
+#endif
+		return 0;
+	}
+
+	/* If there is a "condition", issue the "cmp" or "tst" first. */
+	if (cond != ARC_CC_AL) {
+		if (cond == ARC_CC_SET)
+			len = tst_r32(buf, rd, rs);
+		else
+			len = cmp_r32(buf, rd, rs);
+		/*
+		 * The issued instruction affects the "disp"lacement as
+		 * it alters the "curr_off" by its "len"gth. The "curr_off"
+		 * should always point to the jump instruction.
+		 */
+		disp = get_displacement(curr_off + len, targ_off);
+		len += arc_bcc(BUF(buf, len), arcv2_32_jmps[cond], disp);
+	} else {
+		/* The straight forward unconditional jump. */
+		disp = get_displacement(curr_off, targ_off);
+		len = arc_b(buf, disp);
+	}
+
+	return len;
+}
+
+/*
+ * Generate code for functions calls. There can be two types of calls:
+ *
+ * - Calling another BPF function
+ * - Calling an in-kernel function which is compiled by ARC gcc
+ *
+ * In the later case, we must comply to ARCv2 ABI and handle arguments
+ * and return values accordingly.
+ */
+u8 gen_func_call(u8 *buf, ARC_ADDR func_addr, bool external_func)
+{
+	u8 len = 0;
+
+	/*
+	 * In case of an in-kernel function call, always push the 5th
+	 * argument onto the stack, because that's where the ABI dictates
+	 * it should be found. If the callee doesn't really use it, no harm
+	 * is done. The stack is readjusted either way after the call.
+	 */
+	if (external_func)
+		len += push_r64(BUF(buf, len), BPF_REG_5);
+
+	len += jump_and_link(BUF(buf, len), func_addr);
+
+	if (external_func)
+		len += arc_add_i(BUF(buf, len), ARC_R_SP, ARC_R_SP, ARG5_SIZE);
+
+	return len;
+}
diff --git a/arch/arc/net/bpf_jit_core.c b/arch/arc/net/bpf_jit_core.c
new file mode 100644
index 000000000000..e3628922c24a
--- /dev/null
+++ b/arch/arc/net/bpf_jit_core.c
@@ -0,0 +1,1425 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * The back-end-agnostic part of Just-In-Time compiler for eBPF bytecode.
+ *
+ * Copyright (c) 2024 Synopsys Inc.
+ * Author: Shahab Vahedi <shahab@synopsys.com>
+ */
+#include <linux/bug.h>
+#include "bpf_jit.h"
+
+/*
+ * Check for the return value. A pattern used often in this file.
+ * There must be a "ret" variable of type "int" in the scope.
+ */
+#define CHECK_RET(cmd)			\
+	do {				\
+		ret = (cmd);		\
+		if (ret < 0)		\
+			return ret;	\
+	} while (0)
+
+#ifdef ARC_BPF_JIT_DEBUG
+/* Dumps bytes in /var/log/messages at KERN_INFO level (4). */
+static void dump_bytes(const u8 *buf, u32 len, const char *header)
+{
+	u8 line[64];
+	size_t i, j;
+
+	pr_info("-----------------[ %s ]-----------------\n", header);
+
+	for (i = 0, j = 0; i < len; i++) {
+		/* Last input byte? */
+		if (i == len - 1) {
+			j += scnprintf(line + j, 64 - j, "0x%02x", buf[i]);
+			pr_info("%s\n", line);
+			break;
+		}
+		/* End of line? */
+		else if (i % 8 == 7) {
+			j += scnprintf(line + j, 64 - j, "0x%02x", buf[i]);
+			pr_info("%s\n", line);
+			j = 0;
+		} else {
+			j += scnprintf(line + j, 64 - j, "0x%02x, ", buf[i]);
+		}
+	}
+}
+#endif /* ARC_BPF_JIT_DEBUG */
+
+/********************* JIT context ***********************/
+
+/*
+ * buf:		Translated instructions end up here.
+ * len:		The length of whole block in bytes.
+ * index:	The offset at which the _next_ instruction may be put.
+ */
+struct jit_buffer {
+	u8	*buf;
+	u32	len;
+	u32	index;
+};
+
+/*
+ * This is a subset of "struct jit_context" that its information is deemed
+ * necessary for the next extra pass to come.
+ *
+ * bpf_header:	Needed to finally lock the region.
+ * bpf2insn:	Used to find the translation for instructions of interest.
+ *
+ * Things like "jit.buf" and "jit.len" can be retrieved respectively from
+ * "prog->bpf_func" and "prog->jited_len".
+ */
+struct arc_jit_data {
+	struct bpf_binary_header *bpf_header;
+	u32                      *bpf2insn;
+};
+
+/*
+ * The JIT pertinent context that is used by different functions.
+ *
+ * prog:		The current eBPF program being handled.
+ * orig_prog:		The original eBPF program before any possible change.
+ * jit:			The JIT buffer and its length.
+ * bpf_header:		The JITed program header. "jit.buf" points inside it.
+ * emit:		If set, opcodes are written to memory; else, a dry-run.
+ * do_zext:		If true, 32-bit sub-regs must be zero extended.
+ * bpf2insn:		Maps BPF insn indices to their counterparts in jit.buf.
+ * bpf2insn_valid:	Indicates if "bpf2ins" is populated with the mappings.
+ * jit_data:		A piece of memory to transfer data to the next pass.
+ * arc_regs_clobbered:	Each bit status determines if that arc reg is clobbered.
+ * save_blink:		Whether ARC's "blink" register needs to be saved.
+ * frame_size:		Derived from "prog->aux->stack_depth".
+ * epilogue_offset:	Used by early "return"s in the code to jump here.
+ * need_extra_pass:	A forecast if an "extra_pass" will occur.
+ * is_extra_pass:	Indicates if the current pass is an extra pass.
+ * user_bpf_prog:	True, if VM opcodes come from a real program.
+ * blinded:		True if "constant blinding" step returned a new "prog".
+ * success:		Indicates if the whole JIT went OK.
+ */
+struct jit_context {
+	struct bpf_prog			*prog;
+	struct bpf_prog			*orig_prog;
+	struct jit_buffer		jit;
+	struct bpf_binary_header	*bpf_header;
+	bool				emit;
+	bool				do_zext;
+	u32				*bpf2insn;
+	bool				bpf2insn_valid;
+	struct arc_jit_data		*jit_data;
+	u32				arc_regs_clobbered;
+	bool				save_blink;
+	u16				frame_size;
+	u32				epilogue_offset;
+	bool				need_extra_pass;
+	bool				is_extra_pass;
+	bool				user_bpf_prog;
+	bool				blinded;
+	bool				success;
+};
+
+/*
+ * If we're in ARC_BPF_JIT_DEBUG mode and the debug level is right, dump the
+ * input BPF stream. "bpf_jit_dump()" is not fully suited for this purpose.
+ */
+static void vm_dump(const struct bpf_prog *prog)
+{
+#ifdef ARC_BPF_JIT_DEBUG
+	if (bpf_jit_enable > 1)
+		dump_bytes((u8 *)prog->insns, 8 * prog->len, " VM  ");
+#endif
+}
+
+/*
+ * If the right level of debug is set, dump the bytes. There are 2 variants
+ * of this function:
+ *
+ * 1. Use the standard bpf_jit_dump() which is meant only for JITed code.
+ * 2. Use the dump_bytes() to match its "vm_dump()" instance.
+ */
+static void jit_dump(const struct jit_context *ctx)
+{
+#ifdef ARC_BPF_JIT_DEBUG
+	u8 header[8];
+#endif
+	const int pass = ctx->is_extra_pass ? 2 : 1;
+
+	if (bpf_jit_enable <= 1 || !ctx->prog->jited)
+		return;
+
+#ifdef ARC_BPF_JIT_DEBUG
+	scnprintf(header, sizeof(header), "JIT:%d", pass);
+	dump_bytes(ctx->jit.buf, ctx->jit.len, header);
+	pr_info("\n");
+#else
+	bpf_jit_dump(ctx->prog->len, ctx->jit.len, pass, ctx->jit.buf);
+#endif
+}
+
+/* Initialise the context so there's no garbage. */
+static int jit_ctx_init(struct jit_context *ctx, struct bpf_prog *prog)
+{
+	memset(ctx, 0, sizeof(*ctx));
+
+	ctx->orig_prog = prog;
+
+	/* If constant blinding was requested but failed, scram. */
+	ctx->prog = bpf_jit_blind_constants(prog);
+	if (IS_ERR(ctx->prog))
+		return PTR_ERR(ctx->prog);
+	ctx->blinded = (ctx->prog != ctx->orig_prog);
+
+	/* If the verifier doesn't zero-extend, then we have to do it. */
+	ctx->do_zext = !ctx->prog->aux->verifier_zext;
+
+	ctx->is_extra_pass = ctx->prog->jited;
+	ctx->user_bpf_prog = ctx->prog->is_func;
+
+	return 0;
+}
+
+/*
+ * Only after the first iteration of normal pass (the dry-run),
+ * there are valid offsets in ctx->bpf2insn array.
+ */
+static inline bool offsets_available(const struct jit_context *ctx)
+{
+	return ctx->bpf2insn_valid;
+}
+
+/*
+ * "*mem" should be freed when there is no "extra pass" to come,
+ * or the compilation terminated abruptly. A few of such memory
+ * allocations are: ctx->jit_data and ctx->bpf2insn.
+ */
+static inline void maybe_free(struct jit_context *ctx, void **mem)
+{
+	if (*mem) {
+		if (!ctx->success || !ctx->need_extra_pass) {
+			kfree(*mem);
+			*mem = NULL;
+		}
+	}
+}
+
+/*
+ * Free memories based on the status of the context.
+ *
+ * A note about "bpf_header": On successful runs, "bpf_header" is
+ * not freed, because "jit.buf", a sub-array of it, is returned as
+ * the "bpf_func". However, "bpf_header" is lost and nothing points
+ * to it. This should not cause a leakage, because apparently
+ * "bpf_header" can be revived by "bpf_jit_binary_hdr()". This is
+ * how "bpf_jit_free()" in "kernel/bpf/core.c" releases the memory.
+ */
+static void jit_ctx_cleanup(struct jit_context *ctx)
+{
+	if (ctx->blinded) {
+		/* if all went well, release the orig_prog. */
+		if (ctx->success)
+			bpf_jit_prog_release_other(ctx->prog, ctx->orig_prog);
+		else
+			bpf_jit_prog_release_other(ctx->orig_prog, ctx->prog);
+	}
+
+	maybe_free(ctx, (void **)&ctx->bpf2insn);
+	maybe_free(ctx, (void **)&ctx->jit_data);
+
+	if (!ctx->bpf2insn)
+		ctx->bpf2insn_valid = false;
+
+	/* Freeing "bpf_header" is enough. "jit.buf" is a sub-array of it. */
+	if (!ctx->success && ctx->bpf_header) {
+		bpf_jit_binary_free(ctx->bpf_header);
+		ctx->bpf_header = NULL;
+		ctx->jit.buf    = NULL;
+		ctx->jit.index  = 0;
+		ctx->jit.len    = 0;
+	}
+
+	ctx->emit = false;
+	ctx->do_zext = false;
+}
+
+/*
+ * Analyse the register usage and record the frame size.
+ * The register usage is determined by consulting the back-end.
+ */
+static void analyze_reg_usage(struct jit_context *ctx)
+{
+	size_t i;
+	u32 usage = 0;
+	const struct bpf_insn *insn = ctx->prog->insnsi;
+
+	for (i = 0; i < ctx->prog->len; i++) {
+		u8 bpf_reg;
+		bool call;
+
+		bpf_reg = insn[i].dst_reg;
+		call = (insn[i].code == (BPF_JMP | BPF_CALL)) ? true : false;
+		usage |= mask_for_used_regs(bpf_reg, call);
+	}
+
+	ctx->arc_regs_clobbered = usage;
+	ctx->frame_size = ctx->prog->aux->stack_depth;
+}
+
+/* Verify that no instruction will be emitted when there is no buffer. */
+static inline int jit_buffer_check(const struct jit_context *ctx)
+{
+	if (ctx->emit) {
+		if (!ctx->jit.buf) {
+			pr_err("bpf-jit: inconsistence state; no "
+			       "buffer to emit instructions.\n");
+			return -EINVAL;
+		} else if (ctx->jit.index > ctx->jit.len) {
+			pr_err("bpf-jit: estimated JIT length is less "
+			       "than the emitted instructions.\n");
+			return -EFAULT;
+		}
+	}
+	return 0;
+}
+
+/* On a dry-run (emit=false), "jit.len" is growing gradually. */
+static inline void jit_buffer_update(struct jit_context *ctx, u32 n)
+{
+	if (!ctx->emit)
+		ctx->jit.len += n;
+	else
+		ctx->jit.index += n;
+}
+
+/* Based on "emit", determine the address where instructions are emitted. */
+static inline u8 *effective_jit_buf(const struct jit_context *ctx)
+{
+	return ctx->emit ? (ctx->jit.buf + ctx->jit.index) : NULL;
+}
+
+/* Prologue based on context variables set by "analyze_reg_usage()". */
+static int handle_prologue(struct jit_context *ctx)
+{
+	int ret;
+	u8 *buf = effective_jit_buf(ctx);
+	u32 len = 0;
+
+	CHECK_RET(jit_buffer_check(ctx));
+
+	len = arc_prologue(buf, ctx->arc_regs_clobbered, ctx->frame_size);
+	jit_buffer_update(ctx, len);
+
+	return 0;
+}
+
+/* The counter part for "handle_prologue()". */
+static int handle_epilogue(struct jit_context *ctx)
+{
+	int ret;
+	u8 *buf = effective_jit_buf(ctx);
+	u32 len = 0;
+
+	CHECK_RET(jit_buffer_check(ctx));
+
+	len = arc_epilogue(buf, ctx->arc_regs_clobbered, ctx->frame_size);
+	jit_buffer_update(ctx, len);
+
+	return 0;
+}
+
+/* Tell which number of the BPF instruction we are dealing with. */
+static inline s32 get_index_for_insn(const struct jit_context *ctx,
+				     const struct bpf_insn *insn)
+{
+	return (insn - ctx->prog->insnsi);
+}
+
+/*
+ * In most of the cases, the "offset" is read from "insn->off". However,
+ * if it is an unconditional BPF_JMP32, then it comes from "insn->imm".
+ *
+ * (Courtesy of "cpu=v4" support)
+ */
+static inline s32 get_offset(const struct bpf_insn *insn)
+{
+	if ((BPF_CLASS(insn->code) == BPF_JMP32) &&
+	    (BPF_OP(insn->code) == BPF_JA))
+		return insn->imm;
+	else
+		return insn->off;
+}
+
+/*
+ * Determine to which number of the BPF instruction we're jumping to.
+ *
+ * The "offset" is interpreted as the "number" of BPF instructions
+ * from the _next_ BPF instruction. e.g.:
+ *
+ *  4 means 4 instructions after  the next insn
+ *  0 means 0 instructions after  the next insn -> fallthrough.
+ * -1 means 1 instruction  before the next insn -> jmp to current insn.
+ *
+ *  Another way to look at this, "offset" is the number of instructions
+ *  that exist between the current instruction and the target instruction.
+ *
+ *  It is worth noting that a "mov r,i64", which is 16-byte long, is
+ *  treated as two instructions long, therefore "offset" needn't be
+ *  treated specially for those. Everything is uniform.
+ */
+static inline s32 get_target_index_for_insn(const struct jit_context *ctx,
+					    const struct bpf_insn *insn)
+{
+	return (get_index_for_insn(ctx, insn) + 1) + get_offset(insn);
+}
+
+/* Is there an immediate operand encoded in the "insn"? */
+static inline bool has_imm(const struct bpf_insn *insn)
+{
+	return BPF_SRC(insn->code) == BPF_K;
+}
+
+/* Is the last BPF instruction? */
+static inline bool is_last_insn(const struct bpf_prog *prog, u32 idx)
+{
+	return idx == (prog->len - 1);
+}
+
+/*
+ * Invocation of this function, conditionally signals the need for
+ * an extra pass. The conditions that must be met are:
+ *
+ * 1. The current pass itself shouldn't be an extra pass.
+ * 2. The stream of bytes being JITed must come from a user program.
+ */
+static inline void set_need_for_extra_pass(struct jit_context *ctx)
+{
+	if (!ctx->is_extra_pass)
+		ctx->need_extra_pass = ctx->user_bpf_prog;
+}
+
+/*
+ * Check if the "size" is valid and then transfer the control to
+ * the back-end for the swap.
+ */
+static int handle_swap(u8 *buf, u8 rd, u8 size, u8 endian,
+		       bool force, bool do_zext, u8 *len)
+{
+	/* Sanity check on the size. */
+	switch (size) {
+	case 16:
+	case 32:
+	case 64:
+		break;
+	default:
+		pr_err("bpf-jit: invalid size for swap.\n");
+		return -EINVAL;
+	}
+
+	*len = gen_swap(buf, rd, size, endian, force, do_zext);
+
+	return 0;
+}
+
+/* Checks if the (instruction) index is in valid range. */
+static inline bool check_insn_idx_valid(const struct jit_context *ctx,
+					const s32 idx)
+{
+	return (idx >= 0 && idx < ctx->prog->len);
+}
+
+/*
+ * Decouple the back-end from BPF by converting BPF conditions
+ * to internal enum. ARC_CC_* start from 0 and are used as index
+ * to an array. BPF_J* usage must end after this conversion.
+ */
+static int bpf_cond_to_arc(const u8 op, u8 *arc_cc)
+{
+	switch (op) {
+	case BPF_JA:
+		*arc_cc = ARC_CC_AL;
+		break;
+	case BPF_JEQ:
+		*arc_cc = ARC_CC_EQ;
+		break;
+	case BPF_JGT:
+		*arc_cc = ARC_CC_UGT;
+		break;
+	case BPF_JGE:
+		*arc_cc = ARC_CC_UGE;
+		break;
+	case BPF_JSET:
+		*arc_cc = ARC_CC_SET;
+		break;
+	case BPF_JNE:
+		*arc_cc = ARC_CC_NE;
+		break;
+	case BPF_JSGT:
+		*arc_cc = ARC_CC_SGT;
+		break;
+	case BPF_JSGE:
+		*arc_cc = ARC_CC_SGE;
+		break;
+	case BPF_JLT:
+		*arc_cc = ARC_CC_ULT;
+		break;
+	case BPF_JLE:
+		*arc_cc = ARC_CC_ULE;
+		break;
+	case BPF_JSLT:
+		*arc_cc = ARC_CC_SLT;
+		break;
+	case BPF_JSLE:
+		*arc_cc = ARC_CC_SLE;
+		break;
+	default:
+		pr_err("bpf-jit: can't handle condition 0x%02X\n", op);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/*
+ * Check a few things for a supposedly "jump" instruction:
+ *
+ * 0. "insn" is a "jump" instruction, but not the "call/exit" variant.
+ * 1. The current "insn" index is in valid range.
+ * 2. The index of target instruction is in valid range.
+ */
+static int check_bpf_jump(const struct jit_context *ctx,
+			  const struct bpf_insn *insn)
+{
+	const u8 class = BPF_CLASS(insn->code);
+	const u8 op = BPF_OP(insn->code);
+
+	/* Must be a jmp(32) instruction that is not a "call/exit". */
+	if ((class != BPF_JMP && class != BPF_JMP32) ||
+	    (op == BPF_CALL || op == BPF_EXIT)) {
+		pr_err("bpf-jit: not a jump instruction.\n");
+		return -EINVAL;
+	}
+
+	if (!check_insn_idx_valid(ctx, get_index_for_insn(ctx, insn))) {
+		pr_err("bpf-jit: the bpf jump insn is not in prog.\n");
+		return -EINVAL;
+	}
+
+	if (!check_insn_idx_valid(ctx, get_target_index_for_insn(ctx, insn))) {
+		pr_err("bpf-jit: bpf jump label is out of range.\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/*
+ * Based on input "insn", consult "ctx->bpf2insn" to get the
+ * related index (offset) of the translation in JIT stream.
+ */
+static u32 get_curr_jit_off(const struct jit_context *ctx,
+			    const struct bpf_insn *insn)
+{
+	const s32 idx = get_index_for_insn(ctx, insn);
+#ifdef ARC_BPF_JIT_DEBUG
+	BUG_ON(!offsets_available(ctx) || !check_insn_idx_valid(ctx, idx));
+#endif
+	return ctx->bpf2insn[idx];
+}
+
+/*
+ * The input "insn" must be a jump instruction.
+ *
+ * Based on input "insn", consult "ctx->bpf2insn" to get the
+ * related JIT index (offset) of "target instruction" that
+ * "insn" would jump to.
+ */
+static u32 get_targ_jit_off(const struct jit_context *ctx,
+			    const struct bpf_insn *insn)
+{
+	const s32 tidx = get_target_index_for_insn(ctx, insn);
+#ifdef ARC_BPF_JIT_DEBUG
+	BUG_ON(!offsets_available(ctx) || !check_insn_idx_valid(ctx, tidx));
+#endif
+	return ctx->bpf2insn[tidx];
+}
+
+/*
+ * This function will return 0 for a feasible jump.
+ *
+ * Consult the back-end to check if it finds it feasible to emit
+ * the necessary instructions based on "cond" and the displacement
+ * between the "from_off" and the "to_off".
+ */
+static int feasible_jit_jump(u32 from_off, u32 to_off, u8 cond, bool j32)
+{
+	int ret = 0;
+
+	if (j32) {
+		if (!check_jmp_32(from_off, to_off, cond))
+			ret = -EFAULT;
+	} else {
+		if (!check_jmp_64(from_off, to_off, cond))
+			ret = -EFAULT;
+	}
+
+	if (ret != 0)
+		pr_err("bpf-jit: the JIT displacement is not OK.\n");
+
+	return ret;
+}
+
+/*
+ * This jump handler performs the following steps:
+ *
+ * 1. Compute ARC's internal condition code from BPF's
+ * 2. Determine the bitness of the operation (32 vs. 64)
+ * 3. Sanity check on BPF stream
+ * 4. Sanity check on what is supposed to be JIT's displacement
+ * 5. And finally, emit the necessary instructions
+ *
+ * The last two steps are performed through the back-end.
+ * The value of steps 1 and 2 are necessary inputs for the back-end.
+ */
+static int handle_jumps(const struct jit_context *ctx,
+			const struct bpf_insn *insn,
+			u8 *len)
+{
+	u8 cond;
+	int ret = 0;
+	u8 *buf = effective_jit_buf(ctx);
+	const bool j32 = (BPF_CLASS(insn->code) == BPF_JMP32) ? true : false;
+	const u8 rd = insn->dst_reg;
+	u8 rs = insn->src_reg;
+	u32 curr_off = 0, targ_off = 0;
+
+	*len = 0;
+
+	/* Map the BPF condition to internal enum. */
+	CHECK_RET(bpf_cond_to_arc(BPF_OP(insn->code), &cond));
+
+	/* Sanity check on the BPF byte stream. */
+	CHECK_RET(check_bpf_jump(ctx, insn));
+
+	/*
+	 * Move the immediate into a temporary register _now_ for 2 reasons:
+	 *
+	 * 1. "gen_jmp_{32,64}()" deal with operands in registers.
+	 *
+	 * 2. The "len" parameter will grow so that the current jit offset
+	 *    (curr_off) will have increased to a point where the necessary
+	 *    instructions can be inserted by "gen_jmp_{32,64}()".
+	 */
+	if (has_imm(insn) && cond != ARC_CC_AL) {
+		if (j32) {
+			*len += mov_r32_i32(BUF(buf, *len), JIT_REG_TMP,
+					    insn->imm);
+		} else {
+			*len += mov_r64_i32(BUF(buf, *len), JIT_REG_TMP,
+					    insn->imm);
+		}
+		rs = JIT_REG_TMP;
+	}
+
+	/* If the offsets are known, check if the branch can occur. */
+	if (offsets_available(ctx)) {
+		curr_off = get_curr_jit_off(ctx, insn) + *len;
+		targ_off = get_targ_jit_off(ctx, insn);
+
+		/* Sanity check on the back-end side. */
+		CHECK_RET(feasible_jit_jump(curr_off, targ_off, cond, j32));
+	}
+
+	if (j32) {
+		*len += gen_jmp_32(BUF(buf, *len), rd, rs, cond,
+				   curr_off, targ_off);
+	} else {
+		*len += gen_jmp_64(BUF(buf, *len), rd, rs, cond,
+				   curr_off, targ_off);
+	}
+
+	return ret;
+}
+
+/* Jump to translated epilogue address. */
+static int handle_jmp_epilogue(struct jit_context *ctx,
+			       const struct bpf_insn *insn, u8 *len)
+{
+	u8 *buf = effective_jit_buf(ctx);
+	u32 curr_off = 0, epi_off = 0;
+
+	/* Check the offset only if the data is available. */
+	if (offsets_available(ctx)) {
+		curr_off = get_curr_jit_off(ctx, insn);
+		epi_off = ctx->epilogue_offset;
+
+		if (!check_jmp_64(curr_off, epi_off, ARC_CC_AL)) {
+			pr_err("bpf-jit: epilogue offset is not valid.\n");
+			return -EINVAL;
+		}
+	}
+
+	/* Jump to "epilogue offset" (rd and rs don't matter). */
+	*len = gen_jmp_64(buf, 0, 0, ARC_CC_AL, curr_off, epi_off);
+
+	return 0;
+}
+
+/* Try to get the resolved address and generate the instructions. */
+static int handle_call(struct jit_context *ctx,
+		       const struct bpf_insn *insn,
+		       u8 *len)
+{
+	int  ret;
+	bool in_kernel_func, fixed = false;
+	u64  addr = 0;
+	u8  *buf = effective_jit_buf(ctx);
+
+	ret = bpf_jit_get_func_addr(ctx->prog, insn, ctx->is_extra_pass,
+				    &addr, &fixed);
+	if (ret < 0) {
+		pr_err("bpf-jit: can't get the address for call.\n");
+		return ret;
+	}
+	in_kernel_func = (fixed ? true : false);
+
+	/* No valuable address retrieved (yet). */
+	if (!fixed && !addr)
+		set_need_for_extra_pass(ctx);
+
+	*len = gen_func_call(buf, (ARC_ADDR)addr, in_kernel_func);
+
+	if (insn->src_reg != BPF_PSEUDO_CALL) {
+		/* Assigning ABI's return reg to JIT's return reg. */
+		*len += arc_to_bpf_return(BUF(buf, *len));
+	}
+
+	return 0;
+}
+
+/*
+ * Try to generate instructions for loading a 64-bit immediate.
+ * These sort of instructions are usually associated with the 64-bit
+ * relocations: R_BPF_64_64. Therefore, signal the need for an extra
+ * pass if the circumstances are right.
+ */
+static int handle_ld_imm64(struct jit_context *ctx,
+			   const struct bpf_insn *insn,
+			   u8 *len)
+{
+	const s32 idx = get_index_for_insn(ctx, insn);
+	u8 *buf = effective_jit_buf(ctx);
+
+	/* We're about to consume 2 VM instructions. */
+	if (is_last_insn(ctx->prog, idx)) {
+		pr_err("bpf-jit: need more data for 64-bit immediate.\n");
+		return -EINVAL;
+	}
+
+	*len = mov_r64_i64(buf, insn->dst_reg, insn->imm, (insn + 1)->imm);
+
+	if (bpf_pseudo_func(insn))
+		set_need_for_extra_pass(ctx);
+
+	return 0;
+}
+
+/*
+ * Handles one eBPF instruction at a time. To make this function faster,
+ * it does not call "jit_buffer_check()". Else, it would call it for every
+ * instruction. As a result, it should not be invoked directly. Only
+ * "handle_body()", that has already executed the "check", may call this
+ * function.
+ *
+ * If the "ret" value is negative, something has went wrong. Else,
+ * it mostly holds the value 0 and rarely 1. Number 1 signals
+ * the loop in "handle_body()" to skip the next instruction, because
+ * it has been consumed as part of a 64-bit immediate value.
+ */
+static int handle_insn(struct jit_context *ctx, u32 idx)
+{
+	const struct bpf_insn *insn = &ctx->prog->insnsi[idx];
+	const u8  code = insn->code;
+	const u8  dst  = insn->dst_reg;
+	const u8  src  = insn->src_reg;
+	const s16 off  = insn->off;
+	const s32 imm  = insn->imm;
+	u8 *buf = effective_jit_buf(ctx);
+	u8  len = 0;
+	int ret = 0;
+
+	switch (code) {
+	/* dst += src (32-bit) */
+	case BPF_ALU | BPF_ADD | BPF_X:
+		len = add_r32(buf, dst, src);
+		break;
+	/* dst += imm (32-bit) */
+	case BPF_ALU | BPF_ADD | BPF_K:
+		len = add_r32_i32(buf, dst, imm);
+		break;
+	/* dst -= src (32-bit) */
+	case BPF_ALU | BPF_SUB | BPF_X:
+		len = sub_r32(buf, dst, src);
+		break;
+	/* dst -= imm (32-bit) */
+	case BPF_ALU | BPF_SUB | BPF_K:
+		len = sub_r32_i32(buf, dst, imm);
+		break;
+	/* dst = -dst (32-bit) */
+	case BPF_ALU | BPF_NEG:
+		len = neg_r32(buf, dst);
+		break;
+	/* dst *= src (32-bit) */
+	case BPF_ALU | BPF_MUL | BPF_X:
+		len = mul_r32(buf, dst, src);
+		break;
+	/* dst *= imm (32-bit) */
+	case BPF_ALU | BPF_MUL | BPF_K:
+		len = mul_r32_i32(buf, dst, imm);
+		break;
+	/* dst /= src (32-bit) */
+	case BPF_ALU | BPF_DIV | BPF_X:
+		len = div_r32(buf, dst, src, off == 1);
+		break;
+	/* dst /= imm (32-bit) */
+	case BPF_ALU | BPF_DIV | BPF_K:
+		len = div_r32_i32(buf, dst, imm, off == 1);
+		break;
+	/* dst %= src (32-bit) */
+	case BPF_ALU | BPF_MOD | BPF_X:
+		len = mod_r32(buf, dst, src, off == 1);
+		break;
+	/* dst %= imm (32-bit) */
+	case BPF_ALU | BPF_MOD | BPF_K:
+		len = mod_r32_i32(buf, dst, imm, off == 1);
+		break;
+	/* dst &= src (32-bit) */
+	case BPF_ALU | BPF_AND | BPF_X:
+		len = and_r32(buf, dst, src);
+		break;
+	/* dst &= imm (32-bit) */
+	case BPF_ALU | BPF_AND | BPF_K:
+		len = and_r32_i32(buf, dst, imm);
+		break;
+	/* dst |= src (32-bit) */
+	case BPF_ALU | BPF_OR | BPF_X:
+		len = or_r32(buf, dst, src);
+		break;
+	/* dst |= imm (32-bit) */
+	case BPF_ALU | BPF_OR | BPF_K:
+		len = or_r32_i32(buf, dst, imm);
+		break;
+	/* dst ^= src (32-bit) */
+	case BPF_ALU | BPF_XOR | BPF_X:
+		len = xor_r32(buf, dst, src);
+		break;
+	/* dst ^= imm (32-bit) */
+	case BPF_ALU | BPF_XOR | BPF_K:
+		len = xor_r32_i32(buf, dst, imm);
+		break;
+	/* dst <<= src (32-bit) */
+	case BPF_ALU | BPF_LSH | BPF_X:
+		len = lsh_r32(buf, dst, src);
+		break;
+	/* dst <<= imm (32-bit) */
+	case BPF_ALU | BPF_LSH | BPF_K:
+		len = lsh_r32_i32(buf, dst, imm);
+		break;
+	/* dst >>= src (32-bit) [unsigned] */
+	case BPF_ALU | BPF_RSH | BPF_X:
+		len = rsh_r32(buf, dst, src);
+		break;
+	/* dst >>= imm (32-bit) [unsigned] */
+	case BPF_ALU | BPF_RSH | BPF_K:
+		len = rsh_r32_i32(buf, dst, imm);
+		break;
+	/* dst >>= src (32-bit) [signed] */
+	case BPF_ALU | BPF_ARSH | BPF_X:
+		len = arsh_r32(buf, dst, src);
+		break;
+	/* dst >>= imm (32-bit) [signed] */
+	case BPF_ALU | BPF_ARSH | BPF_K:
+		len = arsh_r32_i32(buf, dst, imm);
+		break;
+	/* dst = src (32-bit) */
+	case BPF_ALU | BPF_MOV | BPF_X:
+		len = mov_r32(buf, dst, src, (u8)off);
+		break;
+	/* dst = imm32 (32-bit) */
+	case BPF_ALU | BPF_MOV | BPF_K:
+		len = mov_r32_i32(buf, dst, imm);
+		break;
+	/* dst = swap(dst) */
+	case BPF_ALU   | BPF_END | BPF_FROM_LE:
+	case BPF_ALU   | BPF_END | BPF_FROM_BE:
+	case BPF_ALU64 | BPF_END | BPF_FROM_LE: {
+		CHECK_RET(handle_swap(buf, dst, imm, BPF_SRC(code),
+				      BPF_CLASS(code) == BPF_ALU64,
+				      ctx->do_zext, &len));
+		break;
+	}
+	/* dst += src (64-bit) */
+	case BPF_ALU64 | BPF_ADD | BPF_X:
+		len = add_r64(buf, dst, src);
+		break;
+	/* dst += imm32 (64-bit) */
+	case BPF_ALU64 | BPF_ADD | BPF_K:
+		len = add_r64_i32(buf, dst, imm);
+		break;
+	/* dst -= src (64-bit) */
+	case BPF_ALU64 | BPF_SUB | BPF_X:
+		len = sub_r64(buf, dst, src);
+		break;
+	/* dst -= imm32 (64-bit) */
+	case BPF_ALU64 | BPF_SUB | BPF_K:
+		len = sub_r64_i32(buf, dst, imm);
+		break;
+	/* dst = -dst (64-bit) */
+	case BPF_ALU64 | BPF_NEG:
+		len = neg_r64(buf, dst);
+		break;
+	/* dst *= src (64-bit) */
+	case BPF_ALU64 | BPF_MUL | BPF_X:
+		len = mul_r64(buf, dst, src);
+		break;
+	/* dst *= imm32 (64-bit) */
+	case BPF_ALU64 | BPF_MUL | BPF_K:
+		len = mul_r64_i32(buf, dst, imm);
+		break;
+	/* dst &= src (64-bit) */
+	case BPF_ALU64 | BPF_AND | BPF_X:
+		len = and_r64(buf, dst, src);
+		break;
+	/* dst &= imm32 (64-bit) */
+	case BPF_ALU64 | BPF_AND | BPF_K:
+		len = and_r64_i32(buf, dst, imm);
+		break;
+	/* dst |= src (64-bit) */
+	case BPF_ALU64 | BPF_OR | BPF_X:
+		len = or_r64(buf, dst, src);
+		break;
+	/* dst |= imm32 (64-bit) */
+	case BPF_ALU64 | BPF_OR | BPF_K:
+		len = or_r64_i32(buf, dst, imm);
+		break;
+	/* dst ^= src (64-bit) */
+	case BPF_ALU64 | BPF_XOR | BPF_X:
+		len = xor_r64(buf, dst, src);
+		break;
+	/* dst ^= imm32 (64-bit) */
+	case BPF_ALU64 | BPF_XOR | BPF_K:
+		len = xor_r64_i32(buf, dst, imm);
+		break;
+	/* dst <<= src (64-bit) */
+	case BPF_ALU64 | BPF_LSH | BPF_X:
+		len = lsh_r64(buf, dst, src);
+		break;
+	/* dst <<= imm32 (64-bit) */
+	case BPF_ALU64 | BPF_LSH | BPF_K:
+		len = lsh_r64_i32(buf, dst, imm);
+		break;
+	/* dst >>= src (64-bit) [unsigned] */
+	case BPF_ALU64 | BPF_RSH | BPF_X:
+		len = rsh_r64(buf, dst, src);
+		break;
+	/* dst >>= imm32 (64-bit) [unsigned] */
+	case BPF_ALU64 | BPF_RSH | BPF_K:
+		len = rsh_r64_i32(buf, dst, imm);
+		break;
+	/* dst >>= src (64-bit) [signed] */
+	case BPF_ALU64 | BPF_ARSH | BPF_X:
+		len = arsh_r64(buf, dst, src);
+		break;
+	/* dst >>= imm32 (64-bit) [signed] */
+	case BPF_ALU64 | BPF_ARSH | BPF_K:
+		len = arsh_r64_i32(buf, dst, imm);
+		break;
+	/* dst = src (64-bit) */
+	case BPF_ALU64 | BPF_MOV | BPF_X:
+		len = mov_r64(buf, dst, src, (u8)off);
+		break;
+	/* dst = imm32 (sign extend to 64-bit) */
+	case BPF_ALU64 | BPF_MOV | BPF_K:
+		len = mov_r64_i32(buf, dst, imm);
+		break;
+	/* dst = imm64 */
+	case BPF_LD | BPF_DW | BPF_IMM:
+		CHECK_RET(handle_ld_imm64(ctx, insn, &len));
+		/* Tell the loop to skip the next instruction. */
+		ret = 1;
+		break;
+	/* dst = *(size *)(src + off) */
+	case BPF_LDX | BPF_MEM | BPF_W:
+	case BPF_LDX | BPF_MEM | BPF_H:
+	case BPF_LDX | BPF_MEM | BPF_B:
+	case BPF_LDX | BPF_MEM | BPF_DW:
+		len = load_r(buf, dst, src, off, BPF_SIZE(code), false);
+		break;
+	case BPF_LDX | BPF_MEMSX | BPF_W:
+	case BPF_LDX | BPF_MEMSX | BPF_H:
+	case BPF_LDX | BPF_MEMSX | BPF_B:
+		len = load_r(buf, dst, src, off, BPF_SIZE(code), true);
+		break;
+	/* *(size *)(dst + off) = src */
+	case BPF_STX | BPF_MEM | BPF_W:
+	case BPF_STX | BPF_MEM | BPF_H:
+	case BPF_STX | BPF_MEM | BPF_B:
+	case BPF_STX | BPF_MEM | BPF_DW:
+		len = store_r(buf, src, dst, off, BPF_SIZE(code));
+		break;
+	case BPF_ST | BPF_MEM | BPF_W:
+	case BPF_ST | BPF_MEM | BPF_H:
+	case BPF_ST | BPF_MEM | BPF_B:
+	case BPF_ST | BPF_MEM | BPF_DW:
+		len = store_i(buf, imm, dst, off, BPF_SIZE(code));
+		break;
+	case BPF_JMP   | BPF_JA:
+	case BPF_JMP   | BPF_JEQ  | BPF_X:
+	case BPF_JMP   | BPF_JEQ  | BPF_K:
+	case BPF_JMP   | BPF_JNE  | BPF_X:
+	case BPF_JMP   | BPF_JNE  | BPF_K:
+	case BPF_JMP   | BPF_JSET | BPF_X:
+	case BPF_JMP   | BPF_JSET | BPF_K:
+	case BPF_JMP   | BPF_JGT  | BPF_X:
+	case BPF_JMP   | BPF_JGT  | BPF_K:
+	case BPF_JMP   | BPF_JGE  | BPF_X:
+	case BPF_JMP   | BPF_JGE  | BPF_K:
+	case BPF_JMP   | BPF_JSGT | BPF_X:
+	case BPF_JMP   | BPF_JSGT | BPF_K:
+	case BPF_JMP   | BPF_JSGE | BPF_X:
+	case BPF_JMP   | BPF_JSGE | BPF_K:
+	case BPF_JMP   | BPF_JLT  | BPF_X:
+	case BPF_JMP   | BPF_JLT  | BPF_K:
+	case BPF_JMP   | BPF_JLE  | BPF_X:
+	case BPF_JMP   | BPF_JLE  | BPF_K:
+	case BPF_JMP   | BPF_JSLT | BPF_X:
+	case BPF_JMP   | BPF_JSLT | BPF_K:
+	case BPF_JMP   | BPF_JSLE | BPF_X:
+	case BPF_JMP   | BPF_JSLE | BPF_K:
+	case BPF_JMP32 | BPF_JA:
+	case BPF_JMP32 | BPF_JEQ  | BPF_X:
+	case BPF_JMP32 | BPF_JEQ  | BPF_K:
+	case BPF_JMP32 | BPF_JNE  | BPF_X:
+	case BPF_JMP32 | BPF_JNE  | BPF_K:
+	case BPF_JMP32 | BPF_JSET | BPF_X:
+	case BPF_JMP32 | BPF_JSET | BPF_K:
+	case BPF_JMP32 | BPF_JGT  | BPF_X:
+	case BPF_JMP32 | BPF_JGT  | BPF_K:
+	case BPF_JMP32 | BPF_JGE  | BPF_X:
+	case BPF_JMP32 | BPF_JGE  | BPF_K:
+	case BPF_JMP32 | BPF_JSGT | BPF_X:
+	case BPF_JMP32 | BPF_JSGT | BPF_K:
+	case BPF_JMP32 | BPF_JSGE | BPF_X:
+	case BPF_JMP32 | BPF_JSGE | BPF_K:
+	case BPF_JMP32 | BPF_JLT  | BPF_X:
+	case BPF_JMP32 | BPF_JLT  | BPF_K:
+	case BPF_JMP32 | BPF_JLE  | BPF_X:
+	case BPF_JMP32 | BPF_JLE  | BPF_K:
+	case BPF_JMP32 | BPF_JSLT | BPF_X:
+	case BPF_JMP32 | BPF_JSLT | BPF_K:
+	case BPF_JMP32 | BPF_JSLE | BPF_X:
+	case BPF_JMP32 | BPF_JSLE | BPF_K:
+		CHECK_RET(handle_jumps(ctx, insn, &len));
+		break;
+	case BPF_JMP | BPF_CALL:
+		CHECK_RET(handle_call(ctx, insn, &len));
+		break;
+
+	case BPF_JMP | BPF_EXIT:
+		/* If this is the last instruction, epilogue will follow. */
+		if (is_last_insn(ctx->prog, idx))
+			break;
+		CHECK_RET(handle_jmp_epilogue(ctx, insn, &len));
+		break;
+	default:
+		pr_err("bpf-jit: can't handle instruction code 0x%02X\n", code);
+		return -EOPNOTSUPP;
+	}
+
+	if (BPF_CLASS(code) == BPF_ALU) {
+		/*
+		 * Skip the "swap" instructions. Even 64-bit swaps are of type
+		 * BPF_ALU (and not BPF_ALU64). Therefore, for the swaps, one
+		 * has to look at the "size" of the operations rather than the
+		 * ALU type. "gen_swap()" specifically takes care of that.
+		 */
+		if (BPF_OP(code) != BPF_END && ctx->do_zext)
+			len += zext(BUF(buf, len), dst);
+	}
+
+	jit_buffer_update(ctx, len);
+
+	return ret;
+}
+
+static int handle_body(struct jit_context *ctx)
+{
+	int ret;
+	bool populate_bpf2insn = false;
+	const struct bpf_prog *prog = ctx->prog;
+
+	CHECK_RET(jit_buffer_check(ctx));
+
+	/*
+	 * Record the mapping for the instructions during the dry-run.
+	 * Doing it this way allows us to have the mapping ready for
+	 * the jump instructions during the real compilation phase.
+	 */
+	if (!ctx->emit)
+		populate_bpf2insn = true;
+
+	for (u32 i = 0; i < prog->len; i++) {
+		/* During the dry-run, jit.len grows gradually per BPF insn. */
+		if (populate_bpf2insn)
+			ctx->bpf2insn[i] = ctx->jit.len;
+
+		CHECK_RET(handle_insn(ctx, i));
+		if (ret > 0) {
+			/* "ret" is 1 if two (64-bit) chunks were consumed. */
+			ctx->bpf2insn[i + 1] = ctx->bpf2insn[i];
+			i++;
+		}
+	}
+
+	/* If bpf2insn had to be populated, then it is done at this point. */
+	if (populate_bpf2insn)
+		ctx->bpf2insn_valid = true;
+
+	return 0;
+}
+
+/*
+ * Initialize the memory with "unimp_s" which is the mnemonic for
+ * "unimplemented" instruction and always raises an exception.
+ *
+ * The instruction is 2 bytes. If "size" is odd, there is not much
+ * that can be done about the last byte in "area". Because, the
+ * CPU always fetches instructions in two bytes. Therefore, the
+ * byte beyond the last one is going to accompany it during a
+ * possible fetch. In the most likely case of a little endian
+ * system, that beyond-byte will become the major opcode and
+ * we have no control over its initialisation.
+ */
+static void fill_ill_insn(void *area, unsigned int size)
+{
+	const u16 unimp_s = 0x79e0;
+
+	if (size & 1) {
+		*((u8 *)area + (size - 1)) = 0xff;
+		size -= 1;
+	}
+
+	memset16(area, unimp_s, size >> 1);
+}
+
+/* Piece of memory that can be allocated at the beginning of jit_prepare(). */
+static int jit_prepare_early_mem_alloc(struct jit_context *ctx)
+{
+	ctx->bpf2insn = kcalloc(ctx->prog->len, sizeof(ctx->jit.len),
+				GFP_KERNEL);
+
+	if (!ctx->bpf2insn) {
+		pr_err("bpf-jit: could not allocate memory for "
+		       "mapping of the instructions.\n");
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+/*
+ * Memory allocations that rely on parameters known at the end of
+ * jit_prepare().
+ */
+static int jit_prepare_final_mem_alloc(struct jit_context *ctx)
+{
+	const size_t alignment = sizeof(u32);
+
+	ctx->bpf_header = bpf_jit_binary_alloc(ctx->jit.len, &ctx->jit.buf,
+					       alignment, fill_ill_insn);
+	if (!ctx->bpf_header) {
+		pr_err("bpf-jit: could not allocate memory for translation.\n");
+		return -ENOMEM;
+	}
+
+	if (ctx->need_extra_pass) {
+		ctx->jit_data = kzalloc(sizeof(*ctx->jit_data), GFP_KERNEL);
+		if (!ctx->jit_data)
+			return -ENOMEM;
+	}
+
+	return 0;
+}
+
+/*
+ * The first phase of the translation without actually emitting any
+ * instruction. It helps in getting a forecast on some aspects, such
+ * as the length of the whole program or where the epilogue starts.
+ *
+ * Whenever the necessary parameters are known, memories are allocated.
+ */
+static int jit_prepare(struct jit_context *ctx)
+{
+	int ret;
+
+	/* Dry run. */
+	ctx->emit = false;
+
+	CHECK_RET(jit_prepare_early_mem_alloc(ctx));
+
+	/* Get the length of prologue section after some register analysis. */
+	analyze_reg_usage(ctx);
+	CHECK_RET(handle_prologue(ctx));
+
+	CHECK_RET(handle_body(ctx));
+
+	/* Record at which offset epilogue begins. */
+	ctx->epilogue_offset = ctx->jit.len;
+
+	/* Process the epilogue section now. */
+	CHECK_RET(handle_epilogue(ctx));
+
+	CHECK_RET(jit_prepare_final_mem_alloc(ctx));
+
+	return 0;
+}
+
+/*
+ * jit_compile() is the real compilation phase. jit_prepare() is
+ * invoked before jit_compile() as a dry-run to make sure everything
+ * will go OK and allocate the necessary memory.
+ *
+ * In the end, jit_compile() checks if it has produced the same number
+ * of instructions as jit_prepare() would.
+ */
+static int jit_compile(struct jit_context *ctx)
+{
+	int ret;
+
+	/* Let there be code. */
+	ctx->emit = true;
+
+	CHECK_RET(handle_prologue(ctx));
+
+	CHECK_RET(handle_body(ctx));
+
+	CHECK_RET(handle_epilogue(ctx));
+
+	if (ctx->jit.index != ctx->jit.len) {
+		pr_err("bpf-jit: divergence between the phases; "
+		       "%u vs. %u (bytes).\n",
+		       ctx->jit.len, ctx->jit.index);
+		return -EFAULT;
+	}
+
+	return 0;
+}
+
+/*
+ * Calling this function implies a successful JIT. A successful
+ * translation is signaled by setting the right parameters:
+ *
+ * prog->jited=1, prog->jited_len=..., prog->bpf_func=...
+ */
+static int jit_finalize(struct jit_context *ctx)
+{
+	struct bpf_prog *prog = ctx->prog;
+
+	/* We're going to need this information for the "do_extra_pass()". */
+	if (ctx->need_extra_pass) {
+		ctx->jit_data->bpf_header = ctx->bpf_header;
+		ctx->jit_data->bpf2insn = ctx->bpf2insn;
+		prog->aux->jit_data = (void *)ctx->jit_data;
+	} else {
+		/*
+		 * If things seem finalised, then mark the JITed memory
+		 * as R-X and flush it.
+		 */
+		if (bpf_jit_binary_lock_ro(ctx->bpf_header)) {
+			pr_err("bpf-jit: Could not lock the JIT memory.\n");
+			return -EFAULT;
+		}
+		flush_icache_range((unsigned long)ctx->bpf_header,
+				   (unsigned long)
+				   BUF(ctx->jit.buf, ctx->jit.len));
+		prog->aux->jit_data = NULL;
+		bpf_prog_fill_jited_linfo(prog, ctx->bpf2insn);
+	}
+
+	ctx->success = true;
+	prog->bpf_func = (void *)ctx->jit.buf;
+	prog->jited_len = ctx->jit.len;
+	prog->jited = 1;
+
+	jit_ctx_cleanup(ctx);
+	jit_dump(ctx);
+
+	return 0;
+}
+
+/*
+ * A lenient verification for the existence of JIT context in "prog".
+ * Apparently the JIT internals, namely jit_subprogs() in bpf/verifier.c,
+ * may request for a second compilation although nothing needs to be done.
+ */
+static inline int check_jit_context(const struct bpf_prog *prog)
+{
+	if (!prog->aux->jit_data) {
+		pr_notice("bpf-jit: no jit data for the extra pass.\n");
+		return 1;
+	} else {
+		return 0;
+	}
+}
+
+/* Reuse the previous pass's data. */
+static int jit_resume_context(struct jit_context *ctx)
+{
+	struct arc_jit_data *jdata =
+		(struct arc_jit_data *)ctx->prog->aux->jit_data;
+
+	if (!jdata) {
+		pr_err("bpf-jit: no jit data for the extra pass.\n");
+		return -EINVAL;
+	}
+
+	ctx->jit.buf = (u8 *)ctx->prog->bpf_func;
+	ctx->jit.len = ctx->prog->jited_len;
+	ctx->bpf_header = jdata->bpf_header;
+	ctx->bpf2insn = (u32 *)jdata->bpf2insn;
+	ctx->bpf2insn_valid = ctx->bpf2insn ? true : false;
+	ctx->jit_data = jdata;
+
+	return 0;
+}
+
+/*
+ * Patch in the new addresses. The instructions of interest are:
+ *
+ * - call
+ * - ld r64, imm64
+ *
+ * For "call"s, it resolves the addresses one more time through the
+ * handle_call().
+ *
+ * For 64-bit immediate loads, it just retranslates them, because the BPF
+ * core in kernel might have changed the value since the normal pass.
+ */
+static int jit_patch_relocations(struct jit_context *ctx)
+{
+	const u8 bpf_opc_call = BPF_JMP | BPF_CALL;
+	const u8 bpf_opc_ldi64 = BPF_LD | BPF_DW | BPF_IMM;
+	const struct bpf_prog *prog = ctx->prog;
+	int ret;
+
+	ctx->emit = true;
+	for (u32 i = 0; i < prog->len; i++) {
+		const struct bpf_insn *insn = &prog->insnsi[i];
+		u8 dummy;
+		/*
+		 * Adjust "ctx.jit.index", so "gen_*()" functions below
+		 * can use it for their output addresses.
+		 */
+		ctx->jit.index = ctx->bpf2insn[i];
+
+		if (insn->code == bpf_opc_call) {
+			CHECK_RET(handle_call(ctx, insn, &dummy));
+		} else if (insn->code == bpf_opc_ldi64) {
+			CHECK_RET(handle_ld_imm64(ctx, insn, &dummy));
+			/* Skip the next instruction. */
+			++i;
+		}
+	}
+	return 0;
+}
+
+/*
+ * A normal pass that involves a "dry-run" phase, jit_prepare(),
+ * to get the necessary data for the real compilation phase,
+ * jit_compile().
+ */
+static struct bpf_prog *do_normal_pass(struct bpf_prog *prog)
+{
+	struct jit_context ctx;
+
+	/* Bail out if JIT is disabled. */
+	if (!prog->jit_requested)
+		return prog;
+
+	if (jit_ctx_init(&ctx, prog)) {
+		jit_ctx_cleanup(&ctx);
+		return prog;
+	}
+
+	/* Get the lengths and allocate buffer. */
+	if (jit_prepare(&ctx)) {
+		jit_ctx_cleanup(&ctx);
+		return prog;
+	}
+
+	if (jit_compile(&ctx)) {
+		jit_ctx_cleanup(&ctx);
+		return prog;
+	}
+
+	if (jit_finalize(&ctx)) {
+		jit_ctx_cleanup(&ctx);
+		return prog;
+	}
+
+	return ctx.prog;
+}
+
+/*
+ * If there are multi-function BPF programs that call each other,
+ * their translated addresses are not known all at once. Therefore,
+ * an extra pass is needed to consult the bpf_jit_get_func_addr()
+ * again to get the newly translated addresses in order to resolve
+ * the "call"s.
+ */
+static struct bpf_prog *do_extra_pass(struct bpf_prog *prog)
+{
+	struct jit_context ctx;
+
+	/* Skip if there's no context to resume from. */
+	if (check_jit_context(prog))
+		return prog;
+
+	if (jit_ctx_init(&ctx, prog)) {
+		jit_ctx_cleanup(&ctx);
+		return prog;
+	}
+
+	if (jit_resume_context(&ctx)) {
+		jit_ctx_cleanup(&ctx);
+		return prog;
+	}
+
+	if (jit_patch_relocations(&ctx)) {
+		jit_ctx_cleanup(&ctx);
+		return prog;
+	}
+
+	if (jit_finalize(&ctx)) {
+		jit_ctx_cleanup(&ctx);
+		return prog;
+	}
+
+	return ctx.prog;
+}
+
+/*
+ * This function may be invoked twice for the same stream of BPF
+ * instructions. The "extra pass" happens, when there are
+ * (re)locations involved that their addresses are not known
+ * during the first run.
+ */
+struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
+{
+	vm_dump(prog);
+
+	/* Was this program already translated? */
+	if (!prog->jited)
+		return do_normal_pass(prog);
+	else
+		return do_extra_pass(prog);
+
+	return prog;
+}
diff --git a/arch/arc/plat-axs10x/axs10x.c b/arch/arc/plat-axs10x/axs10x.c
index 63ea5a606ecd..1feb990a56bc 100644
--- a/arch/arc/plat-axs10x/axs10x.c
+++ b/arch/arc/plat-axs10x/axs10x.c
@@ -6,7 +6,6 @@
  */
 
 #include <linux/of_fdt.h>
-#include <linux/of_platform.h>
 #include <linux/libfdt.h>
 
 #include <asm/asm-offsets.h>
@@ -50,7 +49,7 @@ static void __init axs10x_enable_gpio_intc_wire(void)
 	 * Current implementation of "irq-dw-apb-ictl" driver doesn't work well
 	 * with stacked INTCs. In particular problem happens if its master INTC
 	 * not yet instantiated. See discussion here -
-	 * https://lkml.org/lkml/2015/3/4/755
+	 * https://lore.kernel.org/lkml/54F6FE2C.7020309@synopsys.com
 	 *
 	 * So setup the first gpio block as a passive pass thru and hide it from
 	 * DT hardware topology - connect MB intc directly to cpu intc
diff --git a/arch/arc/plat-hsdk/platform.c b/arch/arc/plat-hsdk/platform.c
index b3ea1fa11f87..c4a875b22352 100644
--- a/arch/arc/plat-hsdk/platform.c
+++ b/arch/arc/plat-hsdk/platform.c
@@ -52,7 +52,7 @@ static void __init hsdk_enable_gpio_intc_wire(void)
 	 * Current implementation of "irq-dw-apb-ictl" driver doesn't work well
 	 * with stacked INTCs. In particular problem happens if its master INTC
 	 * not yet instantiated. See discussion here -
-	 * https://lkml.org/lkml/2015/3/4/755
+	 * https://lore.kernel.org/lkml/54F6FE2C.7020309@synopsys.com
 	 *
 	 * So setup the first gpio block as a passive pass thru and hide it from
 	 * DT hardware topology - connect intc directly to cpu intc
diff --git a/arch/arm/Kbuild b/arch/arm/Kbuild
index 5208f7061524..69de6b6243c7 100644
--- a/arch/arm/Kbuild
+++ b/arch/arm/Kbuild
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
 obj-$(CONFIG_FPE_NWFPE)		+= nwfpe/
 # Put arch/arm/fastfpe/ to use this.
-obj-$(CONFIG_FPE_FASTFPE)	+= $(patsubst $(srctree)/$(src)/%,%,$(wildcard $(srctree)/$(src)/fastfpe/))
+obj-$(CONFIG_FPE_FASTFPE)	+= $(patsubst $(src)/%,%,$(wildcard $(src)/fastfpe/))
 obj-$(CONFIG_VFP)		+= vfp/
 obj-$(CONFIG_XEN)		+= xen/
 obj-$(CONFIG_VDSO)		+= vdso/
@@ -9,3 +9,6 @@ obj-y				+= kernel/ mm/ common/
 obj-y				+= probes/
 obj-y				+= net/
 obj-y				+= crypto/
+
+# for cleaning
+subdir- += boot
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 59baf6c132a7..ff61891abe53 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -3,8 +3,15 @@ config ARM
 	bool
 	default y
 	select ARCH_32BIT_OFF_T
+	select ARCH_CORRECT_STACKTRACE_ON_KRETPROBE if HAVE_KRETPROBES && FRAME_POINTER && !ARM_UNWIND
 	select ARCH_HAS_BINFMT_FLAT
+	select ARCH_HAS_CACHE_LINE_SIZE if OF
+	select ARCH_HAS_CPU_CACHE_ALIASING
+	select ARCH_HAS_CPU_FINALIZE_INIT if MMU
+	select ARCH_HAS_CURRENT_STACK_POINTER
 	select ARCH_HAS_DEBUG_VIRTUAL if MMU
+	select ARCH_HAS_DMA_ALLOC if MMU
+	select ARCH_HAS_DMA_OPS
 	select ARCH_HAS_DMA_WRITE_COMBINE if !ARM_DMA_MEM_BUFFERABLE
 	select ARCH_HAS_ELF_RANDOMIZE
 	select ARCH_HAS_FORTIFY_SOURCE
@@ -13,40 +20,45 @@ config ARM
 	select ARCH_HAS_MEMBARRIER_SYNC_CORE
 	select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
 	select ARCH_HAS_PTE_SPECIAL if ARM_LPAE
-	select ARCH_HAS_PHYS_TO_DMA
 	select ARCH_HAS_SETUP_DMA_OPS
 	select ARCH_HAS_SET_MEMORY
+	select ARCH_STACKWALK
 	select ARCH_HAS_STRICT_KERNEL_RWX if MMU && !XIP_KERNEL
 	select ARCH_HAS_STRICT_MODULE_RWX if MMU
-	select ARCH_HAS_SYNC_DMA_FOR_DEVICE if SWIOTLB || !MMU
-	select ARCH_HAS_SYNC_DMA_FOR_CPU if SWIOTLB || !MMU
+	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
+	select ARCH_HAS_SYNC_DMA_FOR_CPU
 	select ARCH_HAS_TEARDOWN_DMA_OPS if MMU
 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
-	select ARCH_HAVE_CUSTOM_GPIO_H
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG if CPU_V7 || CPU_V7M || CPU_V6K
 	select ARCH_HAS_GCOV_PROFILE_ALL
 	select ARCH_KEEP_MEMBLOCK
+	select ARCH_HAS_UBSAN
 	select ARCH_MIGHT_HAVE_PC_PARPORT
-	select ARCH_NO_SG_CHAIN if !ARM_HAS_SG_CHAIN
 	select ARCH_OPTIONAL_KERNEL_RWX if ARCH_HAS_STRICT_KERNEL_RWX
 	select ARCH_OPTIONAL_KERNEL_RWX_DEFAULT if CPU_V7
+	select ARCH_NEED_CMPXCHG_1_EMU if CPU_V6
 	select ARCH_SUPPORTS_ATOMIC_RMW
+	select ARCH_SUPPORTS_CFI
 	select ARCH_SUPPORTS_HUGETLBFS if ARM_LPAE
+	select ARCH_SUPPORTS_PER_VMA_LOCK
 	select ARCH_USE_BUILTIN_BSWAP
 	select ARCH_USE_CMPXCHG_LOCKREF
 	select ARCH_USE_MEMTEST
+	# https://github.com/llvm/llvm-project/commit/d130f402642fba3d065aacb506cb061c899558de
+	select ARCH_USES_CFI_GENERIC_LLVM_PASS if CLANG_VERSION < 220000
 	select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT if MMU
+	select ARCH_WANT_GENERAL_HUGETLB
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select ARCH_WANT_LD_ORPHAN_WARN
 	select BINFMT_FLAT_ARGVP_ENVP_ON_STACK
 	select BUILDTIME_TABLE_SORT if MMU
+	select COMMON_CLK if !(ARCH_RPC || ARCH_FOOTBRIDGE)
 	select CLONE_BACKWARDS
 	select CPU_PM if SUSPEND || CPU_IDLE
 	select DCACHE_WORD_ACCESS if HAVE_EFFICIENT_UNALIGNED_ACCESS
 	select DMA_DECLARE_COHERENT
 	select DMA_GLOBAL_POOL if !MMU
-	select DMA_OPS
-	select DMA_REMAP if MMU
+	select DMA_NONCOHERENT_MMAP if MMU
 	select EDAC_SUPPORT
 	select EDAC_ATOMIC_SCRUB
 	select GENERIC_ALLOCATOR
@@ -55,8 +67,10 @@ config ARM
 	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
 	select GENERIC_IRQ_IPI if SMP
 	select GENERIC_CPU_AUTOPROBE
+	select GENERIC_CPU_DEVICES
 	select GENERIC_EARLY_IOREMAP
 	select GENERIC_IDLE_POLL_SETUP
+	select GENERIC_IRQ_MULTI_HANDLER
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
 	select GENERIC_IRQ_SHOW_LEVEL
@@ -64,13 +78,16 @@ config ARM
 	select GENERIC_PCI_IOMAP
 	select GENERIC_SCHED_CLOCK
 	select GENERIC_SMP_IDLE_THREAD
-	select HANDLE_DOMAIN_IRQ
 	select HARDIRQS_SW_RESEND
+	select HAS_IOPORT
 	select HAVE_ARCH_AUDITSYSCALL if AEABI && !OABI_COMPAT
 	select HAVE_ARCH_BITREVERSE if (CPU_32v7M || CPU_32v7) && !CPU_32v6
 	select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU
+	select HAVE_ARCH_KFENCE if MMU && !XIP_KERNEL
 	select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32 && MMU
 	select HAVE_ARCH_KASAN if MMU && !XIP_KERNEL
+	select HAVE_ARCH_KASAN_VMALLOC if HAVE_ARCH_KASAN
+	select HAVE_ARCH_KSTACK_ERASE
 	select HAVE_ARCH_MMAP_RND_BITS if MMU
 	select HAVE_ARCH_PFN_VALID
 	select HAVE_ARCH_SECCOMP
@@ -80,17 +97,20 @@ config ARM
 	select HAVE_ARCH_TRANSPARENT_HUGEPAGE if ARM_LPAE
 	select HAVE_ARM_SMCCC if CPU_V7
 	select HAVE_EBPF_JIT if !CPU_ENDIAN_BE32
-	select HAVE_CONTEXT_TRACKING
+	select HAVE_CONTEXT_TRACKING_USER
 	select HAVE_C_RECORDMCOUNT
+	select HAVE_BUILDTIME_MCOUNT_SORT
 	select HAVE_DEBUG_KMEMLEAK if !XIP_KERNEL
 	select HAVE_DMA_CONTIGUOUS if MMU
+	select HAVE_EXTRA_IPI_TRACEPOINTS
 	select HAVE_DYNAMIC_FTRACE if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU
 	select HAVE_DYNAMIC_FTRACE_WITH_REGS if HAVE_DYNAMIC_FTRACE
 	select HAVE_EFFICIENT_UNALIGNED_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && MMU
 	select HAVE_EXIT_THREAD
-	select HAVE_FAST_GUP if ARM_LPAE
-	select HAVE_FTRACE_MCOUNT_RECORD if !XIP_KERNEL
-	select HAVE_FUNCTION_GRAPH_TRACER if !THUMB2_KERNEL && !CC_IS_CLANG
+	select HAVE_GUP_FAST if ARM_LPAE
+	select HAVE_FUNCTION_ERROR_INJECTION
+	select HAVE_FUNCTION_GRAPH_TRACER
+	select HAVE_FUNCTION_GRAPH_FREGS
 	select HAVE_FUNCTION_TRACER if !XIP_KERNEL
 	select HAVE_GCC_PLUGINS
 	select HAVE_HW_BREAKPOINT if PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)
@@ -102,30 +122,42 @@ config ARM
 	select HAVE_KERNEL_XZ
 	select HAVE_KPROBES if !XIP_KERNEL && !CPU_ENDIAN_BE32 && !CPU_V7M
 	select HAVE_KRETPROBES if HAVE_KPROBES
+	select HAVE_LD_DEAD_CODE_DATA_ELIMINATION if (LD_VERSION >= 23600 || LD_IS_LLD) && LD_CAN_USE_KEEP_IN_OVERLAY
 	select HAVE_MOD_ARCH_SPECIFIC
 	select HAVE_NMI
 	select HAVE_OPTPROBES if !THUMB2_KERNEL
+	select HAVE_PAGE_SIZE_4KB
+	select HAVE_PCI if MMU
 	select HAVE_PERF_EVENTS
 	select HAVE_PERF_REGS
 	select HAVE_PERF_USER_STACK_DUMP
 	select MMU_GATHER_RCU_TABLE_FREE if SMP && ARM_LPAE
 	select HAVE_REGS_AND_STACK_ACCESS_API
 	select HAVE_RSEQ
+	select HAVE_RUST if CPU_LITTLE_ENDIAN && CPU_32v7
 	select HAVE_STACKPROTECTOR
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_UID16
 	select HAVE_VIRT_CPU_ACCOUNTING_GEN
+	select HOTPLUG_CORE_SYNC_DEAD if HOTPLUG_CPU
 	select IRQ_FORCED_THREADING
+	select LOCK_MM_AND_FIND_VMA
 	select MODULES_USE_ELF_REL
 	select NEED_DMA_MAP_STATE
 	select OF_EARLY_FLATTREE if OF
 	select OLD_SIGACTION
 	select OLD_SIGSUSPEND3
+	select PCI_DOMAINS_GENERIC if PCI
 	select PCI_SYSCALL if PCI
 	select PERF_USE_VMALLOC
 	select RTC_LIB
+	select SPARSE_IRQ if !(ARCH_FOOTBRIDGE || ARCH_RPC)
 	select SYS_SUPPORTS_APM_EMULATION
+	select THREAD_INFO_IN_TASK
+	select TIMER_OF if OF
+	select HAVE_ARCH_VMAP_STACK if MMU && ARM_HAS_GROUP_RELOCS
 	select TRACE_IRQFLAGS_SUPPORT if !CPU_V7M
+	select USE_OF if !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100)
 	# Above selects are sorted alphabetically; please add new ones
 	# according to that.  Thanks.
 	help
@@ -136,12 +168,16 @@ config ARM
 	  Europe.  There is an ARM Linux project with a web page at
 	  <http://www.arm.linux.org.uk/>.
 
-config ARM_HAS_SG_CHAIN
-	bool
+config ARM_HAS_GROUP_RELOCS
+	def_bool !COMPILE_TEST
+	help
+	  Whether or not to use R_ARM_ALU_PC_Gn or R_ARM_LDR_PC_Gn group
+	  relocations. The combined range is -/+ 256 MiB, which is usually
+	  sufficient, but not for allyesconfig, so we disable this feature
+	  when doing compile testing.
 
 config ARM_DMA_USE_IOMMU
 	bool
-	select ARM_HAS_SG_CHAIN
 	select NEED_SG_DMA_LENGTH
 
 if ARM_DMA_USE_IOMMU
@@ -215,25 +251,19 @@ config ARCH_MAY_HAVE_PC_FDC
 config ARCH_SUPPORTS_UPROBES
 	def_bool y
 
-config ARCH_HAS_DMA_SET_COHERENT_MASK
-	bool
-
 config GENERIC_ISA_DMA
 	bool
 
 config FIQ
 	bool
 
-config NEED_RET_TO_USER
-	bool
-
 config ARCH_MTD_XIP
 	bool
 
 config ARM_PATCH_PHYS_VIRT
-	bool "Patch physical to virtual translations at runtime" if EMBEDDED
+	bool "Patch physical to virtual translations at runtime" if !ARCH_MULTIPLATFORM
 	default y
-	depends on !XIP_KERNEL && MMU
+	depends on MMU
 	help
 	  Patch phys-to-virt and virt-to-phys translation functions at
 	  boot and module load time according to the position of the
@@ -262,12 +292,13 @@ config NEED_MACH_MEMORY_H
 
 config PHYS_OFFSET
 	hex "Physical address of main memory" if MMU
-	depends on !ARM_PATCH_PHYS_VIRT
+	depends on !ARM_PATCH_PHYS_VIRT || !AUTO_ZRELADDR
 	default DRAM_BASE if !MMU
 	default 0x00000000 if ARCH_FOOTBRIDGE
 	default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
-	default 0x20000000 if ARCH_S5PV210
-	default 0xc0000000 if ARCH_SA1100
+	default 0xa0000000 if ARCH_PXA
+	default 0xc0000000 if ARCH_EP93XX || ARCH_SA1100
+	default 0
 	help
 	  Please provide the physical address corresponding to the
 	  location of main memory in your system.
@@ -290,6 +321,12 @@ config MMU
 	  Select if you want MMU-based virtualised addressing space
 	  support by paged memory management. If unsure, say 'Y'.
 
+config ARM_SINGLE_ARMV7M
+	def_bool !MMU
+	select ARM_NVIC
+	select CPU_V7M
+	select NO_IOPORT_MAP
+
 config ARCH_MMAP_RND_BITS_MIN
 	default 8
 
@@ -298,276 +335,22 @@ config ARCH_MMAP_RND_BITS_MAX
 	default 15 if PAGE_OFFSET=0x80000000
 	default 16
 
-#
-# The "ARM system type" choice list is ordered alphabetically by option
-# text.  Please add new entries in the option alphabetic order.
-#
-choice
-	prompt "ARM system type"
-	default ARM_SINGLE_ARMV7M if !MMU
-	default ARCH_MULTIPLATFORM if MMU
-
 config ARCH_MULTIPLATFORM
-	bool "Allow multiple platforms to be selected"
-	depends on MMU
-	select ARCH_FLATMEM_ENABLE
-	select ARCH_SPARSEMEM_ENABLE
-	select ARCH_SELECT_MEMORY_MODEL
-	select ARM_HAS_SG_CHAIN
-	select ARM_PATCH_PHYS_VIRT
-	select AUTO_ZRELADDR
-	select TIMER_OF
-	select COMMON_CLK
-	select GENERIC_IRQ_MULTI_HANDLER
-	select HAVE_PCI
-	select PCI_DOMAINS_GENERIC if PCI
-	select SPARSE_IRQ
-	select USE_OF
-
-config ARM_SINGLE_ARMV7M
-	bool "ARMv7-M based platforms (Cortex-M0/M3/M4)"
-	depends on !MMU
-	select ARM_NVIC
-	select AUTO_ZRELADDR
-	select TIMER_OF
-	select COMMON_CLK
-	select CPU_V7M
-	select NO_IOPORT_MAP
-	select SPARSE_IRQ
-	select USE_OF
-
-config ARCH_EP93XX
-	bool "EP93xx-based"
-	select ARCH_SPARSEMEM_ENABLE
-	select ARM_AMBA
-	imply ARM_PATCH_PHYS_VIRT
-	select ARM_VIC
-	select GENERIC_IRQ_MULTI_HANDLER
-	select AUTO_ZRELADDR
-	select CLKSRC_MMIO
-	select CPU_ARM920T
-	select GPIOLIB
-	select HAVE_LEGACY_CLK
-	help
-	  This enables support for the Cirrus EP93xx series of CPUs.
-
-config ARCH_FOOTBRIDGE
-	bool "FootBridge"
-	select CPU_SA110
-	select FOOTBRIDGE
-	select NEED_MACH_IO_H if !MMU
-	select NEED_MACH_MEMORY_H
-	help
-	  Support for systems based on the DC21285 companion chip
-	  ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
-
-config ARCH_IOP32X
-	bool "IOP32x-based"
-	depends on MMU
-	select CPU_XSCALE
-	select GPIO_IOP
-	select GPIOLIB
-	select NEED_RET_TO_USER
-	select FORCE_PCI
-	select PLAT_IOP
-	help
-	  Support for Intel's 80219 and IOP32X (XScale) family of
-	  processors.
-
-config ARCH_IXP4XX
-	bool "IXP4xx-based"
-	depends on MMU
-	select ARCH_HAS_DMA_SET_COHERENT_MASK
-	select ARCH_SUPPORTS_BIG_ENDIAN
-	select CPU_XSCALE
-	select DMABOUNCE if PCI
-	select GENERIC_IRQ_MULTI_HANDLER
-	select GPIO_IXP4XX
-	select GPIOLIB
-	select HAVE_PCI
-	select IXP4XX_IRQ
-	select IXP4XX_TIMER
-	# With the new PCI driver this is not needed
-	select NEED_MACH_IO_H if IXP4XX_PCI_LEGACY
-	select USB_EHCI_BIG_ENDIAN_DESC
-	select USB_EHCI_BIG_ENDIAN_MMIO
-	help
-	  Support for Intel's IXP4XX (XScale) family of processors.
-
-config ARCH_DOVE
-	bool "Marvell Dove"
-	select CPU_PJ4
-	select GENERIC_IRQ_MULTI_HANDLER
-	select GPIOLIB
-	select HAVE_PCI
-	select MVEBU_MBUS
-	select PINCTRL
-	select PINCTRL_DOVE
-	select PLAT_ORION_LEGACY
-	select SPARSE_IRQ
-	select PM_GENERIC_DOMAINS if PM
-	help
-	  Support for the Marvell Dove SoC 88AP510
-
-config ARCH_PXA
-	bool "PXA2xx/PXA3xx-based"
-	depends on MMU
-	select ARCH_MTD_XIP
-	select ARM_CPU_SUSPEND if PM
-	select AUTO_ZRELADDR
-	select COMMON_CLK
-	select CLKSRC_PXA
-	select CLKSRC_MMIO
-	select TIMER_OF
-	select CPU_XSCALE if !CPU_XSC3
-	select GENERIC_IRQ_MULTI_HANDLER
-	select GPIO_PXA
-	select GPIOLIB
-	select IRQ_DOMAIN
-	select PLAT_PXA
-	select SPARSE_IRQ
-	help
-	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
-
-config ARCH_RPC
-	bool "RiscPC"
-	depends on MMU
-	select ARCH_ACORN
-	select ARCH_MAY_HAVE_PC_FDC
-	select ARCH_SPARSEMEM_ENABLE
-	select ARM_HAS_SG_CHAIN
-	select CPU_SA110
-	select FIQ
-	select HAVE_PATA_PLATFORM
-	select ISA_DMA_API
-	select LEGACY_TIMER_TICK
-	select NEED_MACH_IO_H
-	select NEED_MACH_MEMORY_H
-	select NO_IOPORT_MAP
-	help
-	  On the Acorn Risc-PC, Linux can support the internal IDE disk and
-	  CD-ROM interface, serial and parallel port, and the floppy drive.
-
-config ARCH_SA1100
-	bool "SA1100-based"
-	select ARCH_MTD_XIP
-	select ARCH_SPARSEMEM_ENABLE
-	select CLKSRC_MMIO
-	select CLKSRC_PXA
-	select TIMER_OF if OF
-	select COMMON_CLK
-	select CPU_FREQ
-	select CPU_SA1100
-	select GENERIC_IRQ_MULTI_HANDLER
-	select GPIOLIB
-	select IRQ_DOMAIN
-	select ISA
-	select NEED_MACH_MEMORY_H
-	select SPARSE_IRQ
-	help
-	  Support for StrongARM 11x0 based boards.
-
-config ARCH_S3C24XX
-	bool "Samsung S3C24XX SoCs"
-	select ATAGS
-	select CLKSRC_SAMSUNG_PWM
-	select GPIO_SAMSUNG
-	select GPIOLIB
-	select GENERIC_IRQ_MULTI_HANDLER
-	select HAVE_S3C2410_I2C if I2C
-	select HAVE_S3C_RTC if RTC_CLASS
-	select NEED_MACH_IO_H
-	select S3C2410_WATCHDOG
-	select SAMSUNG_ATAGS
-	select USE_OF
-	select WATCHDOG
-	help
-	  Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443
-	  and S3C2450 SoCs based systems, such as the Simtec Electronics BAST
-	  (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the
-	  Samsung SMDK2410 development board (and derivatives).
-
-config ARCH_OMAP1
-	bool "TI OMAP1"
-	depends on MMU
-	select ARCH_OMAP
-	select CLKSRC_MMIO
-	select GENERIC_IRQ_CHIP
-	select GENERIC_IRQ_MULTI_HANDLER
-	select GPIOLIB
-	select HAVE_LEGACY_CLK
-	select IRQ_DOMAIN
-	select NEED_MACH_IO_H if PCCARD
-	select NEED_MACH_MEMORY_H
-	select SPARSE_IRQ
-	help
-	  Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx)
-
-endchoice
-
-menu "Multiple platform selection"
-	depends on ARCH_MULTIPLATFORM
-
-comment "CPU Core family selection"
-
-config ARCH_MULTI_V4
-	bool "ARMv4 based platforms (FA526)"
-	depends on !ARCH_MULTI_V6_V7
-	select ARCH_MULTI_V4_V5
-	select CPU_FA526
-
-config ARCH_MULTI_V4T
-	bool "ARMv4T based platforms (ARM720T, ARM920T, ...)"
-	depends on !ARCH_MULTI_V6_V7
-	select ARCH_MULTI_V4_V5
-	select CPU_ARM920T if !(CPU_ARM7TDMI || CPU_ARM720T || \
-		CPU_ARM740T || CPU_ARM9TDMI || CPU_ARM922T || \
-		CPU_ARM925T || CPU_ARM940T)
-
-config ARCH_MULTI_V5
-	bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)"
-	depends on !ARCH_MULTI_V6_V7
-	select ARCH_MULTI_V4_V5
-	select CPU_ARM926T if !(CPU_ARM946E || CPU_ARM1020 || \
-		CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || \
-		CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_FEROCEON)
-
-config ARCH_MULTI_V4_V5
-	bool
-
-config ARCH_MULTI_V6
-	bool "ARMv6 based platforms (ARM11)"
-	select ARCH_MULTI_V6_V7
-	select CPU_V6K
-
-config ARCH_MULTI_V7
-	bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)"
+	bool "Require kernel to be portable to multiple machines" if EXPERT
+	depends on MMU && !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100)
 	default y
-	select ARCH_MULTI_V6_V7
-	select CPU_V7
-	select HAVE_SMP
-
-config ARCH_MULTI_V6_V7
-	bool
-	select MIGHT_HAVE_CACHE_L2X0
+	help
+	  In general, all Arm machines can be supported in a single
+	  kernel image, covering either Armv4/v5 or Armv6/v7.
 
-config ARCH_MULTI_CPU_AUTO
-	def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7)
-	select ARCH_MULTI_V5
+	  However, some configuration options require hardcoding machine
+	  specific physical addresses or enable errata workarounds that may
+	  break other machines.
 
-endmenu
+	  Selecting N here allows using those options, including
+	  DEBUG_UNCOMPRESS, XIP_KERNEL and ZBOOT_ROM. If unsure, say Y.
 
-config ARCH_VIRT
-	bool "Dummy Virtual Machine"
-	depends on ARCH_MULTI_V7
-	select ARM_AMBA
-	select ARM_GIC
-	select ARM_GIC_V2M if PCI
-	select ARM_GIC_V3
-	select ARM_GIC_V3_ITS if PCI
-	select ARM_PSCI
-	select HAVE_ARM_ARCH_TIMER
-	select ARCH_SUPPORTS_BIG_ENDIAN
+source "arch/arm/Kconfig.platforms"
 
 #
 # This is sorted alphabetically by mach-* pathname.  However, plat-*
@@ -580,8 +363,6 @@ source "arch/arm/mach-alpine/Kconfig"
 
 source "arch/arm/mach-artpec/Kconfig"
 
-source "arch/arm/mach-asm9260/Kconfig"
-
 source "arch/arm/mach-aspeed/Kconfig"
 
 source "arch/arm/mach-at91/Kconfig"
@@ -594,8 +375,6 @@ source "arch/arm/mach-berlin/Kconfig"
 
 source "arch/arm/mach-clps711x/Kconfig"
 
-source "arch/arm/mach-cns3xxx/Kconfig"
-
 source "arch/arm/mach-davinci/Kconfig"
 
 source "arch/arm/mach-digicolor/Kconfig"
@@ -616,10 +395,6 @@ source "arch/arm/mach-hisi/Kconfig"
 
 source "arch/arm/mach-imx/Kconfig"
 
-source "arch/arm/mach-integrator/Kconfig"
-
-source "arch/arm/mach-iop32x/Kconfig"
-
 source "arch/arm/mach-ixp4xx/Kconfig"
 
 source "arch/arm/mach-keystone/Kconfig"
@@ -634,8 +409,6 @@ source "arch/arm/mach-milbeaut/Kconfig"
 
 source "arch/arm/mach-mmp/Kconfig"
 
-source "arch/arm/mach-moxart/Kconfig"
-
 source "arch/arm/mach-mstar/Kconfig"
 
 source "arch/arm/mach-mv78xx0/Kconfig"
@@ -648,28 +421,19 @@ source "arch/arm/mach-nomadik/Kconfig"
 
 source "arch/arm/mach-npcm/Kconfig"
 
-source "arch/arm/mach-nspire/Kconfig"
-
-source "arch/arm/plat-omap/Kconfig"
-
 source "arch/arm/mach-omap1/Kconfig"
 
 source "arch/arm/mach-omap2/Kconfig"
 
 source "arch/arm/mach-orion5x/Kconfig"
 
-source "arch/arm/mach-oxnas/Kconfig"
-
 source "arch/arm/mach-pxa/Kconfig"
-source "arch/arm/plat-pxa/Kconfig"
 
 source "arch/arm/mach-qcom/Kconfig"
 
-source "arch/arm/mach-rda/Kconfig"
-
 source "arch/arm/mach-realtek/Kconfig"
 
-source "arch/arm/mach-realview/Kconfig"
+source "arch/arm/mach-rpc/Kconfig"
 
 source "arch/arm/mach-rockchip/Kconfig"
 
@@ -693,14 +457,10 @@ source "arch/arm/mach-sunxi/Kconfig"
 
 source "arch/arm/mach-tegra/Kconfig"
 
-source "arch/arm/mach-uniphier/Kconfig"
-
 source "arch/arm/mach-ux500/Kconfig"
 
 source "arch/arm/mach-versatile/Kconfig"
 
-source "arch/arm/mach-vexpress/Kconfig"
-
 source "arch/arm/mach-vt8500/Kconfig"
 
 source "arch/arm/mach-zynq/Kconfig"
@@ -733,13 +493,9 @@ config ARCH_MPS2
 config ARCH_ACORN
 	bool
 
-config PLAT_IOP
-	bool
-
 config PLAT_ORION
 	bool
 	select CLKSRC_MMIO
-	select COMMON_CLK
 	select GENERIC_IRQ_CHIP
 	select IRQ_DOMAIN
 
@@ -747,9 +503,6 @@ config PLAT_ORION_LEGACY
 	bool
 	select PLAT_ORION
 
-config PLAT_PXA
-	bool
-
 config PLAT_VERSATILE
 	bool
 
@@ -757,8 +510,8 @@ source "arch/arm/mm/Kconfig"
 
 config IWMMXT
 	bool "Enable iWMMXt support"
-	depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4 || CPU_PJ4B
-	default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4 || CPU_PJ4B
+	depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK
+	default y if PXA27x || PXA3xx || ARCH_MMP
 	help
 	  Enable support for iWMMXt context switching at run time if
 	  running on a CPU that supports it.
@@ -827,7 +580,9 @@ config ARM_ERRATA_458693
 	  hazard might then cause a processor deadlock. The workaround enables
 	  the L1 caching of the NEON accesses and disables the PLD instruction
 	  in the ACTLR register. Note that setting specific bits in the ACTLR
-	  register may not be available in non-secure mode.
+	  register may not be available in non-secure mode and thus is not
+	  available on a multiplatform kernel. This should be applied by the
+	  bootloader instead.
 
 config ARM_ERRATA_460075
 	bool "ARM errata: Data written to the L2 cache can be overwritten with stale data"
@@ -840,7 +595,9 @@ config ARM_ERRATA_460075
 	  and overwritten with stale memory contents from external memory. The
 	  workaround disables the write-allocate mode for the L2 cache via the
 	  ACTLR register. Note that setting specific bits in the ACTLR register
-	  may not be available in non-secure mode.
+	  may not be available in non-secure mode and thus is not available on
+	  a multiplatform kernel. This should be applied by the bootloader
+	  instead.
 
 config ARM_ERRATA_742230
 	bool "ARM errata: DMB operation may be faulty"
@@ -853,7 +610,10 @@ config ARM_ERRATA_742230
 	  ordering of the two writes. This workaround sets a specific bit in
 	  the diagnostic register of the Cortex-A9 which causes the DMB
 	  instruction to behave as a DSB, ensuring the correct behaviour of
-	  the two writes.
+	  the two writes. Note that setting specific bits in the diagnostics
+	  register may not be available in non-secure mode and thus is not
+	  available on a multiplatform kernel. This should be applied by the
+	  bootloader instead.
 
 config ARM_ERRATA_742231
 	bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption"
@@ -868,7 +628,10 @@ config ARM_ERRATA_742231
 	  replaced from one of the CPUs at the same time as another CPU is
 	  accessing it. This workaround sets specific bits in the diagnostic
 	  register of the Cortex-A9 which reduces the linefill issuing
-	  capabilities of the processor.
+	  capabilities of the processor. Note that setting specific bits in the
+	  diagnostics register may not be available in non-secure mode and thus
+	  is not available on a multiplatform kernel. This should be applied by
+	  the bootloader instead.
 
 config ARM_ERRATA_643719
 	bool "ARM errata: LoUIS bit field in CLIDR register is incorrect"
@@ -905,7 +668,9 @@ config ARM_ERRATA_743622
 	  register of the Cortex-A9 which disables the Store Buffer
 	  optimisation, preventing the defect from occurring. This has no
 	  visible impact on the overall performance or power consumption of the
-	  processor.
+	  processor. Note that setting specific bits in the diagnostics register
+	  may not be available in non-secure mode and thus is not available on a
+	  multiplatform kernel. This should be applied by the bootloader instead.
 
 config ARM_ERRATA_751472
 	bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation"
@@ -917,6 +682,10 @@ config ARM_ERRATA_751472
 	  completion of a following broadcasted operation if the second
 	  operation is received by a CPU before the ICIALLUIS has completed,
 	  potentially leading to corrupted entries in the cache or TLB.
+	  Note that setting specific bits in the diagnostics register may
+	  not be available in non-secure mode and thus is not available on
+	  a multiplatform kernel. This should be applied by the bootloader
+	  instead.
 
 config ARM_ERRATA_754322
 	bool "ARM errata: possible faulty MMU translations following an ASID switch"
@@ -966,6 +735,17 @@ config ARM_ERRATA_764369
 	  relevant cache maintenance functions and sets a specific bit
 	  in the diagnostic control register of the SCU.
 
+config ARM_ERRATA_764319
+	bool "ARM errata: Read to DBGPRSR and DBGOSLSR may generate Undefined instruction"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 764319 Cortex-A9 erratum.
+	  CP14 read accesses to the DBGPRSR and DBGOSLSR registers generate an
+	  unexpected Undefined Instruction exception when the DBGSWENABLE
+	  external pin is set to 0, even when the CP14 accesses are performed
+	  from a privileged mode. This work around catches the exception in a
+	  way the kernel does not stop execution.
+
 config ARM_ERRATA_775420
        bool "ARM errata: A data cache maintenance operation which aborts, might lead to deadlock"
        depends on CPU_V7
@@ -1082,21 +862,10 @@ config ISA
 	  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
 	  newer boards don't support it.  If you have ISA, say Y, otherwise N.
 
-# Select ISA DMA controller support
-config ISA_DMA
-	bool
-	select ISA_DMA_API
-
 # Select ISA DMA interface
 config ISA_DMA_API
 	bool
 
-config PCI_NANOENGINE
-	bool "BSE nanoEngine PCI support"
-	depends on SA1100_NANOENGINE
-	help
-	  Enable PCI on the BSE nanoEngine board.
-
 config ARM_ERRATA_814220
 	bool "ARM errata: Cache maintenance by set/way operations can execute out of order"
 	depends on CPU_V7
@@ -1139,7 +908,7 @@ config SMP
 	  uniprocessor machines. On a uniprocessor machine, the kernel
 	  will run faster if you say N here.
 
-	  See also <file:Documentation/x86/i386/IO-APIC.rst>,
+	  See also <file:Documentation/arch/x86/i386/IO-APIC.rst>,
 	  <file:Documentation/admin-guide/lockup-watchdogs.rst> and the SMP-HOWTO available at
 	  <http://tldp.org/HOWTO/SMP-HOWTO.html>.
 
@@ -1147,7 +916,7 @@ config SMP
 
 config SMP_ON_UP
 	bool "Allow booting SMP kernel on uniprocessor systems"
-	depends on SMP && !XIP_KERNEL && MMU
+	depends on SMP && MMU
 	default y
 	help
 	  SMP kernels contain instructions which fail on non-SMP processors.
@@ -1157,31 +926,27 @@ config SMP_ON_UP
 
 	  If you don't know what to do here, say Y.
 
+
+config CURRENT_POINTER_IN_TPIDRURO
+	def_bool y
+	depends on CPU_32v6K && !CPU_V6
+
+config IRQSTACKS
+	def_bool y
+	select HAVE_IRQ_EXIT_ON_IRQ_STACK
+	select HAVE_SOFTIRQ_ON_OWN_STACK
+
 config ARM_CPU_TOPOLOGY
 	bool "Support cpu topology definition"
 	depends on SMP && CPU_V7
+	select ARCH_SUPPORTS_SCHED_MC
+	select ARCH_SUPPORTS_SCHED_SMT
 	default y
 	help
 	  Support ARM cpu topology definition. The MPIDR register defines
 	  affinity between processors which is then used to describe the cpu
 	  topology of an ARM System.
 
-config SCHED_MC
-	bool "Multi-core scheduler support"
-	depends on ARM_CPU_TOPOLOGY
-	help
-	  Multi-core scheduler support improves the CPU scheduler's decision
-	  making when dealing with multi-core CPU chips at a cost of slightly
-	  increased overhead in some places. If unsure say N here.
-
-config SCHED_SMT
-	bool "SMT scheduler support"
-	depends on ARM_CPU_TOPOLOGY
-	help
-	  Improves the CPU scheduler's decision making when dealing with
-	  MultiThreading at a cost of slightly increased overhead in some
-	  places. If unsure say N here.
-
 config HAVE_ARM_SCU
 	bool
 	help
@@ -1310,27 +1075,6 @@ config ARM_PSCI
 	  0022A ("Power State Coordination Interface System Software on
 	  ARM processors").
 
-# The GPIO number here must be sorted by descending number. In case of
-# a multiplatform kernel, we just want the highest value required by the
-# selected platforms.
-config ARCH_NR_GPIO
-	int
-	default 2048 if ARCH_INTEL_SOCFPGA
-	default 1024 if ARCH_BRCMSTB || ARCH_RENESAS || ARCH_TEGRA || \
-		ARCH_ZYNQ || ARCH_ASPEED
-	default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || \
-		SOC_DRA7XX || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210
-	default 416 if ARCH_SUNXI
-	default 392 if ARCH_U8500
-	default 352 if ARCH_VT8500
-	default 288 if ARCH_ROCKCHIP
-	default 264 if MACH_H4700
-	default 0
-	help
-	  Maximum number of GPIOs in the system.
-
-	  If unsure, leave the default value.
-
 config HZ_FIXED
 	int
 	default 128 if SOC_AT91RM9200
@@ -1386,7 +1130,7 @@ config THUMB2_KERNEL
 
 config ARM_PATCH_IDIV
 	bool "Runtime patch udiv/sdiv instructions into __aeabi_{u}idiv()"
-	depends on CPU_32v7 && !XIP_KERNEL
+	depends on CPU_32v7
 	default y
 	help
 	  The ARM compiler inserts calls to __aeabi_idiv() and
@@ -1417,8 +1161,6 @@ config AEABI
 	  disambiguate both ABIs and allow for backward compatibility support
 	  (selected with CONFIG_OABI_COMPAT).
 
-	  To use this you need GCC version 4.0.0 or later.
-
 config OABI_COMPAT
 	bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)"
 	depends on AEABI && !THUMB2_KERNEL
@@ -1441,19 +1183,20 @@ config OABI_COMPAT
 	  at all). If in doubt say N.
 
 config ARCH_SELECT_MEMORY_MODEL
-	bool
+	def_bool y
 
 config ARCH_FLATMEM_ENABLE
-	bool
+	def_bool !(ARCH_RPC || ARCH_SA1100)
 
 config ARCH_SPARSEMEM_ENABLE
-	bool
+	def_bool !ARCH_FOOTBRIDGE
 	select SPARSEMEM_STATIC if SPARSEMEM
 
 config HIGHMEM
 	bool "High Memory Support"
 	depends on MMU
 	select KMAP_LOCAL
+	select KMAP_LOCAL_NON_LINEAR_PTE_ARRAY
 	help
 	  The address space of ARM processors is only 4 Gigabytes large
 	  and it has to accommodate user address space, kernel address
@@ -1479,9 +1222,9 @@ config HIGHPTE
 	  consumed by page tables.  Setting this option will allow
 	  user-space 2nd level page tables to reside in high memory.
 
-config CPU_SW_DOMAIN_PAN
-	bool "Enable use of CPU domains to implement privileged no-access"
-	depends on MMU && !ARM_LPAE
+config ARM_PAN
+	bool "Enable privileged no-access"
+	depends on MMU
 	default y
 	help
 	  Increase kernel security by ensuring that normal kernel accesses
@@ -1490,20 +1233,34 @@ config CPU_SW_DOMAIN_PAN
 	  by ensuring that magic values (such as LIST_POISON) will always
 	  fault when dereferenced.
 
+	  The implementation uses CPU domains when !CONFIG_ARM_LPAE and
+	  disabling of TTBR0 page table walks with CONFIG_ARM_LPAE.
+
+config CPU_SW_DOMAIN_PAN
+	def_bool y
+	depends on ARM_PAN && !ARM_LPAE
+	help
+	  Enable use of CPU domains to implement privileged no-access.
+
 	  CPUs with low-vector mappings use a best-efforts implementation.
 	  Their lower 1MB needs to remain accessible for the vectors, but
 	  the remainder of userspace will become appropriately inaccessible.
 
-config HW_PERF_EVENTS
+config CPU_TTBR0_PAN
 	def_bool y
-	depends on ARM_PMU
+	depends on ARM_PAN && ARM_LPAE
+	help
+	  Enable privileged no-access by disabling TTBR0 page table walks when
+	  running in kernel mode.
 
-config ARCH_WANT_GENERAL_HUGETLB
+config HW_PERF_EVENTS
 	def_bool y
+	depends on ARM_PMU
 
 config ARM_MODULE_PLTS
 	bool "Use PLTs to allow module memory to spill over into vmalloc area"
 	depends on MODULES
+	select KASAN_VMALLOC if KASAN
 	default y
 	help
 	  Allocate PLTs when loading modules so that jumps and calls whose
@@ -1518,21 +1275,20 @@ config ARM_MODULE_PLTS
 	  Disabling this is usually safe for small single-platform
 	  configurations. If unsure, say y.
 
-config FORCE_MAX_ZONEORDER
-	int "Maximum zone order"
-	default "12" if SOC_AM33XX
-	default "9" if SA1111
-	default "11"
+config ARCH_FORCE_MAX_ORDER
+	int "Order of maximal physically contiguous allocations"
+	default "11" if SOC_AM33XX
+	default "8" if SA1111
+	default "10"
 	help
-	  The kernel memory allocator divides physically contiguous memory
-	  blocks into "zones", where each zone is a power of two number of
-	  pages.  This option selects the largest power of two that the kernel
-	  keeps in the memory allocator.  If you need to allocate very large
-	  blocks of physically contiguous memory, then you may need to
-	  increase this value.
+	  The kernel page allocator limits the size of maximal physically
+	  contiguous allocations. The limit is called MAX_PAGE_ORDER and it
+	  defines the maximal power of two of number of pages that can be
+	  allocated as a single contiguous block. This option allows
+	  overriding the default setting when ability to allocate very
+	  large blocks of physically contiguous memory is required.
 
-	  This config option is actually maximum order plus one. For example,
-	  a value of 11 means that the largest free memory block is 2^10 pages.
+	  Don't change if unsure.
 
 config ALIGNMENT_TRAP
 	def_bool CPU_CP15_MMU
@@ -1598,10 +1354,13 @@ config XEN
 	help
 	  Say Y if you want to run Linux in a Virtual Machine on Xen on ARM.
 
+config CC_HAVE_STACKPROTECTOR_TLS
+	def_bool $(cc-option,-mtp=cp15 -mstack-protector-guard=tls -mstack-protector-guard-offset=0)
+
 config STACKPROTECTOR_PER_TASK
 	bool "Use a unique stack canary value for each task"
-	depends on GCC_PLUGINS && STACKPROTECTOR && SMP && !XIP_DEFLATED_DATA
-	select GCC_PLUGIN_ARM_SSP_PER_TASK
+	depends on STACKPROTECTOR && CURRENT_POINTER_IN_TPIDRURO && !XIP_DEFLATED_DATA
+	depends on CC_HAVE_STACKPROTECTOR_TLS
 	default y
 	help
 	  Due to the fact that GCC uses an ordinary symbol reference from
@@ -1624,15 +1383,17 @@ config USE_OF
 	help
 	  Include support for flattened device tree machine descriptions.
 
+config ARCH_WANT_FLAT_DTB_INSTALL
+	def_bool y
+
 config ATAGS
-	bool "Support for the traditional ATAGS boot data passing" if USE_OF
+	bool "Support for the traditional ATAGS boot data passing"
 	default y
 	help
 	  This is the traditional way of passing data to the kernel at boot
 	  time. If you are solely relying on the flattened device tree (or
 	  the ARM_ATAG_DTB_COMPAT option) then you may unselect this option
-	  to remove ATAGS support from your kernel binary.  If unsure,
-	  leave this to y.
+	  to remove ATAGS support from your kernel binary.
 
 config DEPRECATED_PARAM_STRUCT
 	bool "Provide old way to pass kernel parameters"
@@ -1708,7 +1469,8 @@ config ARM_ATAG_DTB_COMPAT
 	  from the ATAG list and store it at run time into the appended DTB.
 
 choice
-	prompt "Kernel command line type" if ARM_ATAG_DTB_COMPAT
+	prompt "Kernel command line type"
+	depends on ARM_ATAG_DTB_COMPAT
 	default ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER
 
 config ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER
@@ -1737,9 +1499,9 @@ config CMDLINE
 	  memory size and the root device (e.g., mem=64M root=/dev/nfs).
 
 choice
-	prompt "Kernel command line type" if CMDLINE != ""
+	prompt "Kernel command line type"
+	depends on CMDLINE != ""
 	default CMDLINE_FROM_BOOTLOADER
-	depends on ATAGS
 
 config CMDLINE_FROM_BOOTLOADER
 	bool "Use bootloader kernel arguments if available"
@@ -1766,6 +1528,7 @@ endchoice
 config XIP_KERNEL
 	bool "Kernel Execute-In-Place from ROM"
 	depends on !ARM_LPAE && !ARCH_MULTIPLATFORM
+	depends on !ARM_PATCH_IDIV && !ARM_PATCH_PHYS_VIRT && !SMP_ON_UP
 	help
 	  Execute-In-Place allows the kernel to run from non-volatile storage
 	  directly addressable by the CPU, such as NOR flash. This saves RAM
@@ -1804,20 +1567,8 @@ config XIP_DEFLATED_DATA
 	  copied, saving some precious ROM space. A possible drawback is a
 	  slightly longer boot delay.
 
-config KEXEC
-	bool "Kexec system call (EXPERIMENTAL)"
-	depends on (!SMP || PM_SLEEP_SMP)
-	depends on MMU
-	select KEXEC_CORE
-	help
-	  kexec is a system call that implements the ability to shutdown your
-	  current kernel, and to start another kernel.  It is like a reboot
-	  but it is independent of the system firmware.   And like a reboot
-	  you can start any kernel with it, not just Linux.
-
-	  It is an ongoing process to be certain the hardware in a machine
-	  is properly shutdown, so do not be surprised if this code does not
-	  initially work for you.
+config ARCH_SUPPORTS_KEXEC
+	def_bool (!SMP || PM_SLEEP_SMP) && MMU
 
 config ATAGS_PROC
 	bool "Export atags in procfs"
@@ -1827,20 +1578,15 @@ config ATAGS_PROC
 	  Should the atags used to boot the kernel be exported in an "atags"
 	  file in procfs. Useful with kexec.
 
-config CRASH_DUMP
-	bool "Build kdump crash kernel (EXPERIMENTAL)"
-	help
-	  Generate crash dump after being started by kexec. This should
-	  be normally only set in special crash dump kernels which are
-	  loaded in the main kernel with kexec-tools into a specially
-	  reserved region and then later executed after a crash by
-	  kdump/kexec. The crash dump kernel must be compiled to a
-	  memory address not used by the main kernel
+config ARCH_SUPPORTS_CRASH_DUMP
+	def_bool y
 
-	  For more details see Documentation/admin-guide/kdump/kdump.rst
+config ARCH_DEFAULT_CRASH_DUMP
+	def_bool y
 
 config AUTO_ZRELADDR
-	bool "Auto calculation of the decompressed kernel image address"
+	bool "Auto calculation of the decompressed kernel image address" if !ARCH_MULTIPLATFORM
+	default !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100)
 	help
 	  ZRELADDR is the physical address where the decompressed kernel
 	  image will be placed. If AUTO_ZRELADDR is selected, the address
@@ -1944,7 +1690,7 @@ config VFP
 	  Say Y to include VFP support code in the kernel. This is needed
 	  if your hardware includes a VFP unit.
 
-	  Please see <file:Documentation/arm/vfp/release-notes.rst> for
+	  Please see <file:Documentation/arch/arm/vfp/release-notes.rst> for
 	  release notes and additional status information.
 
 	  Say N if your target does not have VFP hardware.
@@ -1988,9 +1734,3 @@ config ARCH_HIBERNATION_POSSIBLE
 	default y if ARCH_SUSPEND_POSSIBLE
 
 endmenu
-
-if CRYPTO
-source "arch/arm/crypto/Kconfig"
-endif
-
-source "arch/arm/Kconfig.assembler"
diff --git a/arch/arm/Kconfig.assembler b/arch/arm/Kconfig.assembler
deleted file mode 100644
index 5cb31aae1188..000000000000
--- a/arch/arm/Kconfig.assembler
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-
-config AS_VFP_VMRS_FPINST
-	def_bool $(as-instr,.fpu vfpv2\nvmrs r0$(comma)FPINST)
-	help
-	  Supported by binutils >= 2.24 and LLVM integrated assembler.
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 98436702e0c7..366f162e147d 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -17,7 +17,7 @@ config ARM_PTDUMP_DEBUGFS
 	  kernel.
 	  If in doubt, say "N"
 
-config DEBUG_WX
+config ARM_DEBUG_WX
 	bool "Warn on W+X mappings at boot"
 	depends on MMU
 	select ARM_PTDUMP_CORE
@@ -65,9 +65,7 @@ config UNWINDER_FRAME_POINTER
 
 config UNWINDER_ARM
 	bool "ARM EABI stack unwinder"
-	depends on AEABI && !FUNCTION_GRAPH_TRACER
-	# https://github.com/ClangBuiltLinux/linux/issues/732
-	depends on !LD_IS_LLD || LLD_VERSION >= 110000
+	depends on AEABI
 	select ARM_UNWIND
 	help
 	  This option enables stack unwinding support in the kernel
@@ -81,8 +79,16 @@ endchoice
 config ARM_UNWIND
 	bool
 
-config FRAME_POINTER
-	bool
+config BACKTRACE_VERBOSE
+	bool "Verbose backtrace"
+	depends on EXPERT
+	help
+	  When the kernel produces a warning or oops, the kernel prints a
+	  trace of the call chain. This option controls whether we include
+	  the numeric addresses or only include the symbolic information.
+
+	  In most cases, say N here, unless you are intending to debug the
+	  kernel and have access to the kernel binary image.
 
 config DEBUG_USER
 	bool "Verbose user fault messages"
@@ -201,6 +207,26 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on the FLEXCOM3 port of SAMA7G5.
 
+	config DEBUG_AT91_LAN966_FLEXCOM
+		bool "Kernel low-level debugging on LAN966 FLEXCOM USART"
+		select DEBUG_AT91_UART
+		depends on SOC_LAN966
+		help
+		Say Y here if you want kernel low-level debugging support
+		on the FLEXCOM port of LAN966.
+
+		DEBUG_UART_PHYS | DEBUG_UART_VIRT
+
+		0xe0040200      | 0xfd040200     | FLEXCOM0
+		0xe0044200      | 0xfd044200     | FLEXCOM1
+		0xe0060200      | 0xfd060200     | FLEXCOM2
+		0xe0064200      | 0xfd064200     | FLEXCOM3
+		0xe0070200      | 0xfd070200     | FLEXCOM4
+
+		By default, enabling FLEXCOM3 port. Based on requirement, use
+		DEBUG_UART_PHYS and DEBUG_UART_VIRT configurations from above
+		table.
+
 	config DEBUG_BCM2835
 		bool "Kernel low-level debugging on BCM2835 PL011 UART"
 		depends on ARCH_BCM2835 && ARCH_MULTI_V6
@@ -216,6 +242,10 @@ choice
 		depends on ARCH_BCM_5301X || ARCH_BCM_NSP
 		select DEBUG_UART_8250
 
+	config DEBUG_BCMBCA
+		bool "Kernel low-level debugging on BCMBCA UART0"
+		depends on ARCH_BCMBCA
+
 	config DEBUG_BCM_HR2
 		bool "Kernel low-level debugging on Hurricane 2 UART2"
 		depends on ARCH_BCM_HR2
@@ -242,7 +272,7 @@ choice
 
 	config DEBUG_BCM63XX_UART
 		bool "Kernel low-level debugging on BCM63XX UART"
-		depends on ARCH_BCM_63XX
+		depends on ARCH_BCMBCA
 
 	config DEBUG_BERLIN_UART
 		bool "Marvell Berlin SoC Debug UART"
@@ -278,14 +308,6 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to the second serial port on these devices.
 
-	config DEBUG_CNS3XXX
-		bool "Kernel Kernel low-level debugging on Cavium Networks CNS3xxx"
-		depends on ARCH_CNS3XXX
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want the debug print routines to direct
-                  their output to the CNS3xxx UART0.
-
 	config DEBUG_DAVINCI_DA8XX_UART1
 		bool "Kernel low-level debugging on DaVinci DA8XX using UART1"
 		depends on ARCH_DAVINCI_DA8XX
@@ -302,14 +324,6 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to UART2 serial port on DaVinci DA8XX devices.
 
-	config DEBUG_DAVINCI_DMx_UART0
-		bool "Kernel low-level debugging on DaVinci DMx using UART0"
-		depends on ARCH_DAVINCI_DMx
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to UART0 serial port on DaVinci DMx devices.
-
 	config DEBUG_DC21285_PORT
 		bool "Kernel low-level debugging messages via footbridge serial port"
 		depends on FOOTBRIDGE
@@ -410,12 +424,12 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on i.MX25.
 
-	config DEBUG_IMX21_IMX27_UART
-		bool "i.MX21 and i.MX27 Debug UART"
-		depends on SOC_IMX21 || SOC_IMX27
+	config DEBUG_IMX27_UART
+		bool "i.MX27 Debug UART"
+		depends on SOC_IMX27
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  on i.MX21 or i.MX27.
+		  on i.MX27.
 
 	config DEBUG_IMX28_UART
 		bool "i.MX28 Debug UART"
@@ -739,30 +753,6 @@ choice
 		depends on ARCH_OMAP2PLUS
 		select DEBUG_UART_8250
 
-	config DEBUG_OMAP7XXUART1
-		bool "Kernel low-level debugging via OMAP730 UART1"
-		depends on ARCH_OMAP730
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on OMAP730 based platforms on the UART1.
-
-	config DEBUG_OMAP7XXUART2
-		bool "Kernel low-level debugging via OMAP730 UART2"
-		depends on ARCH_OMAP730
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on OMAP730 based platforms on the UART2.
-
-	config DEBUG_OMAP7XXUART3
-		bool "Kernel low-level debugging via OMAP730 UART3"
-		depends on ARCH_OMAP730
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on OMAP730 based platforms on the UART3.
-
 	config DEBUG_TI81XXUART1
 		bool "Kernel low-level debugging messages via TI81XX UART1 (ti8148evm)"
 		depends on ARCH_OMAP2PLUS
@@ -1017,7 +1007,6 @@ choice
 	config DEBUG_S3C_UART0
 		depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
-		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
 		select DEBUG_S3C64XX_UART if ARCH_S3C64XX
 		select DEBUG_S5PV210_UART if ARCH_S5PV210
 		bool "Use Samsung S3C UART 0 for low-level debug"
@@ -1029,7 +1018,6 @@ choice
 	config DEBUG_S3C_UART1
 		depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
-		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
 		select DEBUG_S3C64XX_UART if ARCH_S3C64XX
 		select DEBUG_S5PV210_UART if ARCH_S5PV210
 		bool "Use Samsung S3C UART 1 for low-level debug"
@@ -1041,7 +1029,6 @@ choice
 	config DEBUG_S3C_UART2
 		depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
-		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
 		select DEBUG_S3C64XX_UART if ARCH_S3C64XX
 		select DEBUG_S5PV210_UART if ARCH_S5PV210
 		bool "Use Samsung S3C UART 2 for low-level debug"
@@ -1061,33 +1048,6 @@ choice
 		  their output to UART 3. The port must have been initialised
 		  by the boot-loader before use.
 
-	config DEBUG_S3C2410_UART0
-		depends on ARCH_S3C24XX
-		select DEBUG_S3C2410_UART
-		bool "Use S3C2410/S3C2412 UART 0 for low-level debug"
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to UART 0. The port must have been initialised
-		  by the boot-loader before use.
-
-	config DEBUG_S3C2410_UART1
-		depends on ARCH_S3C24XX
-		select DEBUG_S3C2410_UART
-		bool "Use S3C2410/S3C2412 UART 1 for low-level debug"
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to UART 1. The port must have been initialised
-		  by the boot-loader before use.
-
-	config DEBUG_S3C2410_UART2
-		depends on ARCH_S3C24XX
-		select DEBUG_S3C2410_UART
-		bool "Use S3C2410/S3C2412 UART 2 for low-level debug"
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to UART 2. The port must have been initialised
-		  by the boot-loader before use.
-
 	config DEBUG_SA1100
 		depends on ARCH_SA1100
 		bool "Use SA1100 UARTs for low-level debug"
@@ -1247,8 +1207,8 @@ choice
 		depends on MACH_STM32MP157
 		select DEBUG_STM32_UART
 		help
-		  Say Y here if you want kernel low-level debugging support
-		  on STM32MP1 based platforms, wich default UART is wired on
+		  Say Y here if you want kernel low-level debugging support on
+		  STM32MP1-based platforms, where the default UART is wired to
 		  UART4, but another UART instance can be selected by modifying
 		  CONFIG_DEBUG_UART_PHYS and CONFIG_DEBUG_UART_VIRT.
 
@@ -1450,13 +1410,6 @@ config DEBUG_AT91_UART
 config DEBUG_EXYNOS_UART
 	bool
 
-config DEBUG_S3C2410_UART
-	bool
-	select DEBUG_S3C24XX_UART
-
-config DEBUG_S3C24XX_UART
-	bool
-
 config DEBUG_S3C64XX_UART
 	bool
 
@@ -1464,8 +1417,7 @@ config DEBUG_S5PV210_UART
 	bool
 
 config DEBUG_S3C_UART
-	depends on DEBUG_S3C2410_UART || DEBUG_S3C24XX_UART || \
-		   DEBUG_S3C64XX_UART ||  DEBUG_S5PV210_UART || \
+	depends on DEBUG_S3C64XX_UART ||  DEBUG_S5PV210_UART || \
 		   DEBUG_EXYNOS_UART
 	int
 	default "0" if DEBUG_S3C_UART0
@@ -1481,7 +1433,7 @@ config DEBUG_IMX_UART_PORT
 	int "i.MX Debug UART Port Selection"
 	depends on DEBUG_IMX1_UART || \
 		   DEBUG_IMX25_UART || \
-		   DEBUG_IMX21_IMX27_UART || \
+		   DEBUG_IMX27_UART || \
 		   DEBUG_IMX31_UART || \
 		   DEBUG_IMX35_UART || \
 		   DEBUG_IMX50_UART || \
@@ -1540,12 +1492,12 @@ config DEBUG_LL_INCLUDE
 	default "debug/icedcc.S" if DEBUG_ICEDCC
 	default "debug/imx.S" if DEBUG_IMX1_UART || \
 				 DEBUG_IMX25_UART || \
-				 DEBUG_IMX21_IMX27_UART || \
+				 DEBUG_IMX27_UART || \
 				 DEBUG_IMX31_UART || \
 				 DEBUG_IMX35_UART || \
 				 DEBUG_IMX50_UART || \
 				 DEBUG_IMX51_UART || \
-				 DEBUG_IMX53_UART ||\
+				 DEBUG_IMX53_UART || \
 				 DEBUG_IMX6Q_UART || \
 				 DEBUG_IMX6SL_UART || \
 				 DEBUG_IMX6SX_UART || \
@@ -1566,7 +1518,7 @@ config DEBUG_LL_INCLUDE
 	default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA0
 	default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA1
 	default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4
-	default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART || DEBUG_S3C64XX_UART
+	default "debug/s3c24xx.S" if DEBUG_S3C64XX_UART
 	default "debug/s5pv210.S" if DEBUG_S5PV210_UART
 	default "debug/sti.S" if DEBUG_STIH41X_ASC2
 	default "debug/sti.S" if DEBUG_STIH41X_SBC_ASC1
@@ -1578,7 +1530,7 @@ config DEBUG_LL_INCLUDE
 	default "debug/vf.S" if DEBUG_VF_UART
 	default "debug/vt8500.S" if DEBUG_VT8500_UART0
 	default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
-	default "debug/bcm63xx.S" if DEBUG_BCM63XX_UART
+	default "debug/bcm63xx.S" if DEBUG_BCM63XX_UART || DEBUG_BCMBCA
 	default "debug/digicolor.S" if DEBUG_DIGICOLOR_UA0
 	default "debug/brcmstb.S" if DEBUG_BRCMSTB_UART
 	default "mach/debug-macro.S"
@@ -1589,11 +1541,10 @@ config DEBUG_UART_PL01X
 
 # Compatibility options for 8250
 config DEBUG_UART_8250
-	def_bool ARCH_IOP32X || ARCH_IXP4XX || ARCH_RPC
+	def_bool ARCH_IXP4XX || ARCH_RPC
 
 config DEBUG_UART_PHYS
 	hex "Physical base address of debug UART"
-	default 0x01c20000 if DEBUG_DAVINCI_DMx_UART0
 	default 0x01c28000 if DEBUG_SUNXI_UART0
 	default 0x01c28400 if DEBUG_SUNXI_UART1
 	default 0x01d0c000 if DEBUG_DAVINCI_DA8XX_UART1
@@ -1643,20 +1594,11 @@ config DEBUG_UART_PHYS
 	default 0x48020000 if DEBUG_OMAP4UART3 || DEBUG_TI81XXUART1
 	default 0x48022000 if DEBUG_TI81XXUART2
 	default 0x48024000 if DEBUG_TI81XXUART3
-	default 0x4806a000 if DEBUG_OMAP2UART1 || DEBUG_OMAP3UART1 || \
-				DEBUG_OMAP4UART1 || DEBUG_OMAP5UART1
-	default 0x4806c000 if DEBUG_OMAP2UART2 || DEBUG_OMAP3UART2 || \
-				DEBUG_OMAP4UART2 || DEBUG_OMAP5UART2
+	default 0x4806a000 if DEBUG_OMAP2UART1
+	default 0x4806c000 if DEBUG_OMAP2UART2
 	default 0x4806e000 if DEBUG_OMAP2UART3 || DEBUG_OMAP4UART4
 	default 0x49020000 if DEBUG_OMAP3UART3
 	default 0x49042000 if DEBUG_OMAP3UART4
-	default 0x50000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
-				DEBUG_S3C2410_UART0)
-	default 0x50004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
-				DEBUG_S3C2410_UART1)
-	default 0x50008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
-				DEBUG_S3C2410_UART2)
-	default 0x78000000 if DEBUG_CNS3XXX
 	default 0x7c0003f8 if DEBUG_FOOTBRIDGE_COM1
 	default 0x7f005000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0
 	default 0x7f005400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1
@@ -1676,6 +1618,7 @@ config DEBUG_UART_PHYS
 	default 0xd4017000 if DEBUG_MMP_UART2
 	default 0xd4018000 if DEBUG_MMP_UART3
 	default 0xe0000000 if DEBUG_SPEAR13XX
+	default 0xe0064200 if DEBUG_AT91_LAN966_FLEXCOM
 	default 0xe1824200 if DEBUG_AT91_SAMA7G5_FLEXCOM3
 	default 0xe4007000 if DEBUG_HIP04_UART
 	default 0xe6c40000 if DEBUG_RMOBILE_SCIFA0
@@ -1699,18 +1642,18 @@ config DEBUG_UART_PHYS
 	default 0xfcb00000 if DEBUG_HI3620_UART
 	default 0xfd883000 if DEBUG_ALPINE_UART0
 	default 0xfe531000 if DEBUG_STIH41X_SBC_ASC1
-	default 0xfe800000 if ARCH_IOP32X
 	default 0xfed32000 if DEBUG_STIH41X_ASC2
 	default 0xff690000 if DEBUG_RK32_UART2
+	default 0xff800640 if DEBUG_BCMBCA
 	default 0xffc02000 if DEBUG_SOCFPGA_UART0
 	default 0xffc02100 if DEBUG_SOCFPGA_ARRIA10_UART1
 	default 0xffc03000 if DEBUG_SOCFPGA_CYCLONE5_UART1
 	default 0xffe40000 if DEBUG_RCAR_GEN1_SCIF0
 	default 0xffe42000 if DEBUG_RCAR_GEN1_SCIF2
 	default 0xfff36000 if DEBUG_HIGHBANK_UART
-	default 0xfffb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
-	default 0xfffb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
-	default 0xfffb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
+	default 0xfffb0000 if DEBUG_OMAP1UART1
+	default 0xfffb0800 if DEBUG_OMAP1UART2
+	default 0xfffb9800 if DEBUG_OMAP1UART3
 	default 0xfffe8600 if DEBUG_BCM63XX_UART
 	default 0xffffee00 if DEBUG_AT91_SAM9263_DBGU
 	default 0xfffff200 if DEBUG_AT91_RM9200_DBGU
@@ -1724,9 +1667,9 @@ config DEBUG_UART_PHYS
 		DEBUG_RCAR_GEN2_SCIF2 || DEBUG_RCAR_GEN2_SCIF4 || \
 		DEBUG_RCAR_GEN2_SCIFA2 || \
 		DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \
-		DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \
+		DEBUG_RMOBILE_SCIFA4 || \
 		DEBUG_S3C64XX_UART || \
-		DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
+		DEBUG_BCM63XX_UART || DEBUG_BCMBCA || DEBUG_ASM9260_UART || \
 		DEBUG_DIGICOLOR_UA0 || \
 		DEBUG_AT91_UART || DEBUG_STM32_UART || \
 		DEBUG_STIH41X_ASC2 || DEBUG_STIH41X_SBC_ASC1 || \
@@ -1761,15 +1704,9 @@ config DEBUG_UART_VIRT
 	default 0xf6200000 if DEBUG_PXA_UART1
 	default 0xf7000000 if DEBUG_SUN9I_UART0
 	default 0xf7000000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0
-	default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
-				DEBUG_S3C2410_UART0)
 	default 0xf7000400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1
 	default 0xf7000800 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART2
 	default 0xf7000c00 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART3
-	default 0xf7004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
-				DEBUG_S3C2410_UART1)
-	default 0xf7008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
-				DEBUG_S3C2410_UART2)
 	default 0xf7020000 if DEBUG_AT91_SAMA5D2_UART1
 	default 0xf7fc9000 if DEBUG_BERLIN_UART
 	default 0xf8007000 if DEBUG_HIP04_UART
@@ -1782,13 +1719,10 @@ config DEBUG_UART_VIRT
 	default 0xfa020000 if DEBUG_OMAP4UART3 || DEBUG_TI81XXUART1
 	default 0xfa022000 if DEBUG_TI81XXUART2
 	default 0xfa024000 if DEBUG_TI81XXUART3
-	default 0xfa06a000 if DEBUG_OMAP2UART1 || DEBUG_OMAP3UART1 || \
-				DEBUG_OMAP4UART1 || DEBUG_OMAP5UART1
-	default 0xfa06c000 if DEBUG_OMAP2UART2 || DEBUG_OMAP3UART2 || \
-				DEBUG_OMAP4UART2 || DEBUG_OMAP5UART2
+	default 0xfa06a000 if DEBUG_OMAP2UART1
+	default 0xfa06c000 if DEBUG_OMAP2UART2
 	default 0xfa06e000 if DEBUG_OMAP2UART3 || DEBUG_OMAP4UART4
 	default 0xfa71e000 if DEBUG_QCOM_UARTDM
-	default 0xfb002000 if DEBUG_CNS3XXX
 	default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
 	default 0xfb00c000 if DEBUG_AT91_SAMA5D4_USART3
 	default 0xfb020000 if DEBUG_OMAP3UART3
@@ -1796,6 +1730,7 @@ config DEBUG_UART_VIRT
 	default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
 	default 0xfcfe8600 if DEBUG_BCM63XX_UART
 	default 0xfd000000 if DEBUG_SPEAR3XX || DEBUG_SPEAR13XX
+	default 0xfd064200 if DEBUG_AT91_LAN966_FLEXCOM
 	default 0xfd531000 if DEBUG_STIH41X_SBC_ASC1
 	default 0xfd883000 if DEBUG_ALPINE_UART0
 	default 0xfdd32000 if DEBUG_STIH41X_ASC2
@@ -1804,7 +1739,7 @@ config DEBUG_UART_VIRT
 	default 0xfe018000 if DEBUG_MMP_UART3
 	default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART
 	default 0xfe300000 if DEBUG_BCM_KONA_UART
-	default 0xfe800000 if ARCH_IOP32X
+	default 0xfe300640 if DEBUG_BCMBCA
 	default 0xfeb00000 if DEBUG_HI3620_UART || DEBUG_HIX5HD2_UART
 	default 0xfeb24000 if DEBUG_RK3X_UART0
 	default 0xfeb26000 if DEBUG_RK3X_UART1
@@ -1815,7 +1750,6 @@ config DEBUG_UART_VIRT
 	default 0xfec03000 if DEBUG_SOCFPGA_CYCLONE5_UART1
 	default 0xfec12000 if DEBUG_MVEBU_UART0 || DEBUG_MVEBU_UART0_ALTERNATE
 	default 0xfec12100 if DEBUG_MVEBU_UART1_ALTERNATE
-	default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0
 	default 0xfec90000 if DEBUG_RK32_UART2
 	default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1
 	default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_SD5203_UART
@@ -1828,16 +1762,16 @@ config DEBUG_UART_VIRT
 	default 0xfec00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
 	default 0xfec00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
 	default 0xfef36000 if DEBUG_HIGHBANK_UART
-	default 0xfefb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
-	default 0xfefb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
-	default 0xfefb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
+	default 0xff0b0000 if DEBUG_OMAP1UART1
+	default 0xff0b0800 if DEBUG_OMAP1UART2
+	default 0xff0b9800 if DEBUG_OMAP1UART3
 	default 0xffd01000 if DEBUG_HIP01_UART
 	default DEBUG_UART_PHYS if !MMU
 	depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
 		DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
-		DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
+		DEBUG_QCOM_UARTDM || \
 		DEBUG_S3C64XX_UART || \
-		DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
+		DEBUG_BCM63XX_UART || DEBUG_BCMBCA || DEBUG_ASM9260_UART || \
 		DEBUG_DIGICOLOR_UA0 || \
 		DEBUG_AT91_UART || DEBUG_STM32_UART || \
 		DEBUG_STIH41X_ASC2 || DEBUG_STIH41X_SBC_ASC1 || \
@@ -1846,9 +1780,8 @@ config DEBUG_UART_VIRT
 config DEBUG_UART_8250_SHIFT
 	int "Register offset shift for the 8250 debug UART"
 	depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
-	default 0 if DEBUG_FOOTBRIDGE_COM1 || ARCH_IOP32X || DEBUG_BCM_5301X || \
-		DEBUG_BCM_HR2 || DEBUG_OMAP7XXUART1 || DEBUG_OMAP7XXUART2 || \
-		DEBUG_OMAP7XXUART3
+	default 0 if DEBUG_FOOTBRIDGE_COM1 || DEBUG_BCM_5301X || \
+		DEBUG_BCM_HR2
 	default 3 if DEBUG_MSTARV7_PMUART
 	default 2
 
@@ -1859,9 +1792,9 @@ config DEBUG_UART_8250_WORD
 	default y if DEBUG_SOCFPGA_UART0 || DEBUG_SOCFPGA_ARRIA10_UART1 || \
 		DEBUG_SOCFPGA_CYCLONE5_UART1 || DEBUG_KEYSTONE_UART0 || \
 		DEBUG_KEYSTONE_UART1 || DEBUG_ALPINE_UART0 || \
-		DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \
-		DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_BCM_IPROC_UART3 || \
-		DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2
+		DEBUG_DAVINCI_DA8XX_UART1 || DEBUG_DAVINCI_DA8XX_UART2 || \
+		DEBUG_BCM_IPROC_UART3 || DEBUG_BCM_KONA_UART || \
+		DEBUG_RK32_UART2
 
 config DEBUG_UART_8250_PALMCHIP
 	bool "8250 UART is Palmchip BK-310x"
@@ -1873,26 +1806,19 @@ config DEBUG_UART_8250_PALMCHIP
 
 config DEBUG_UNCOMPRESS
 	bool "Enable decompressor debugging via DEBUG_LL output"
-	depends on ARCH_MULTIPLATFORM || PLAT_SAMSUNG || ARM_SINGLE_ARMV7M
+	depends on !ARCH_MULTIPLATFORM
+	depends on !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100)
 	depends on DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
 		     (!DEBUG_TEGRA_UART || !ZBOOT_ROM) && \
 		     !DEBUG_BRCMSTB_UART && !DEBUG_SEMIHOSTING
 	help
-	  This option influences the normal decompressor output for
-	  multiplatform kernels.  Normally, multiplatform kernels disable
-	  decompressor output because it is not possible to know where to
-	  send the decompressor output.
-
-	  When this option is set, the selected DEBUG_LL output method
-	  will be re-used for normal decompressor output on multiplatform
-	  kernels.
-	  
+	  Say Y here to enable debug output in the decompressor code, using
+	  the selected DEBUG_LL output method.
 
 config UNCOMPRESS_INCLUDE
 	string
-	default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \
-					PLAT_SAMSUNG || ARM_SINGLE_ARMV7M
-	default "mach/uncompress.h"
+	default "mach/uncompress.h" if ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100
+	default "debug/uncompress.h"
 
 config EARLY_PRINTK
 	bool "Early printk"
diff --git a/arch/arm/Kconfig.platforms b/arch/arm/Kconfig.platforms
new file mode 100644
index 000000000000..5c19c1f2cff6
--- /dev/null
+++ b/arch/arm/Kconfig.platforms
@@ -0,0 +1,208 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+menu "Platform selection"
+	depends on MMU
+
+comment "CPU Core family selection"
+
+config ARCH_MULTI_V4
+	bool "ARMv4 based platforms (FA526, StrongARM)"
+	depends on !ARCH_MULTI_V6_V7
+	# https://github.com/llvm/llvm-project/issues/50764
+	depends on !LD_IS_LLD || LLD_VERSION >= 160000
+	select ARCH_MULTI_V4_V5
+	select CPU_FA526 if !(CPU_SA110 || CPU_SA1100)
+
+config ARCH_MULTI_V4T
+	bool "ARMv4T based platforms (ARM720T, ARM920T, ...)"
+	depends on !ARCH_MULTI_V6_V7
+	# https://github.com/llvm/llvm-project/issues/50764
+	depends on !LD_IS_LLD || LLD_VERSION >= 160000
+	select ARCH_MULTI_V4_V5
+	select CPU_ARM920T if !(CPU_ARM7TDMI || CPU_ARM720T || \
+		CPU_ARM740T || CPU_ARM9TDMI || CPU_ARM922T || \
+		CPU_ARM925T || CPU_ARM940T)
+
+config ARCH_MULTI_V5
+	bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)"
+	depends on !ARCH_MULTI_V6_V7
+	select ARCH_MULTI_V4_V5
+	select CPU_ARM926T if !(CPU_ARM946E || CPU_ARM1020 || \
+		CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || \
+		CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_FEROCEON)
+
+config ARCH_MULTI_V4_V5
+	bool
+
+config ARCH_MULTI_V6
+	bool "ARMv6 based platforms (ARM11)"
+	select ARCH_MULTI_V6_V7
+	select CPU_V6K
+
+config ARCH_MULTI_V7
+	bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)"
+	default y
+	select ARCH_MULTI_V6_V7
+	select CPU_V7
+	select HAVE_SMP
+
+config ARCH_MULTI_V6_V7
+	bool
+	select MIGHT_HAVE_CACHE_L2X0
+
+config ARCH_MULTI_CPU_AUTO
+	def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7)
+	select ARCH_MULTI_V5
+
+endmenu
+
+config ARCH_VIRT
+	bool "Dummy Virtual Machine"
+	depends on ARCH_MULTI_V7
+	select ARM_AMBA
+	select ARM_GIC
+	select ARM_GIC_V2M if PCI
+	select ARM_GIC_V3
+	select ARM_GIC_V3_ITS if PCI
+	select ARM_PSCI
+	select HAVE_ARM_ARCH_TIMER
+
+config ARCH_AIROHA
+	bool "Airoha SoC Support"
+	depends on ARCH_MULTI_V7
+	select ARM_AMBA
+	select ARM_GIC
+	select ARM_GIC_V3
+	select ARM_PSCI
+	select HAVE_ARM_ARCH_TIMER
+	help
+	  Support for Airoha EN7523 SoCs
+
+config MACH_ASM9260
+	bool "Alphascale ASM9260"
+	depends on ARCH_MULTI_V5
+	depends on CPU_LITTLE_ENDIAN
+	select CPU_ARM926T
+	select ASM9260_TIMER
+	help
+	  Support for Alphascale ASM9260 based platform.
+
+menuconfig ARCH_HPE
+	bool "HPE SoC support"
+	depends on ARCH_MULTI_V7
+	help
+	  This enables support for HPE ARM based BMC chips.
+
+if ARCH_HPE
+
+config ARCH_HPE_GXP
+	bool "HPE GXP SoC"
+	depends on ARCH_MULTI_V7
+	select ARM_VIC
+	select GENERIC_IRQ_CHIP
+	select CLKSRC_MMIO
+	help
+	  HPE GXP is the name of the HPE Soc. This SoC is used to implement many
+	  BMC features at HPE. It supports ARMv7 architecture based on the Cortex
+	  A9 core. It is capable of using an AXI bus to which a memory controller
+	  is attached. It has multiple SPI interfaces to connect boot flash and
+	  BIOS flash. It uses a 10/100/1000 MAC for network connectivity. It
+	  has multiple i2c engines to drive connectivity with a host
+	  infrastructure.
+
+endif
+
+menuconfig ARCH_MOXART
+	bool "MOXA ART SoC"
+	depends on ARCH_MULTI_V4
+	depends on CPU_LITTLE_ENDIAN
+	select CPU_FA526
+	select ARM_DMA_MEM_BUFFERABLE
+	select FARADAY_FTINTC010
+	select FTTMR010_TIMER
+	select GPIOLIB
+	select PHYLIB if NETDEVICES
+	help
+	  Say Y here if you want to run your kernel on hardware with a
+	  MOXA ART SoC.
+	  The MOXA ART SoC is based on a Faraday FA526 ARMv4 32-bit
+	  192 MHz CPU with MMU and 16KB/8KB D/I-cache (UC-7112-LX).
+	  Used on models UC-7101, UC-7112/UC-7110, IA240/IA241, IA3341.
+
+if ARCH_MOXART
+
+config MACH_UC7112LX
+	bool "MOXA UC-7112-LX"
+	depends on ARCH_MOXART
+	help
+	  Say Y here if you intend to run this kernel on a MOXA
+	  UC-7112-LX embedded computer.
+
+endif
+
+config ARCH_NSPIRE
+	bool "TI-NSPIRE based"
+	depends on ARCH_MULTI_V4T
+	depends on CPU_LITTLE_ENDIAN
+	select CPU_ARM926T
+	select GENERIC_IRQ_CHIP
+	select ARM_AMBA
+	select ARM_VIC
+	select ARM_TIMER_SP804
+	select NSPIRE_TIMER
+	select POWER_RESET
+	select POWER_RESET_SYSCON
+	help
+	  This enables support for systems using the TI-NSPIRE CPU
+
+config ARCH_RDA
+	bool "RDA Micro SoCs"
+	depends on ARCH_MULTI_V7
+	select RDA_INTC
+	select RDA_TIMER
+	help
+	  This enables support for the RDA Micro 8810PL SoC family.
+
+menuconfig ARCH_SUNPLUS
+	bool "Sunplus SoCs"
+	depends on ARCH_MULTI_V7
+	help
+	  Support for Sunplus SoC family: SP7021 and succeeding SoC-based systems,
+	  such as the Banana Pi BPI-F2S development board (and derivatives).
+	  (<http://www.sinovoip.com.cn/ecp_view.asp?id=586>)
+	  (<https://tibbo.com/store/plus1.html>)
+
+if ARCH_SUNPLUS
+
+config SOC_SP7021
+	bool "Sunplus SP7021 SoC support"
+	default ARCH_SUNPLUS
+	select HAVE_ARM_ARCH_TIMER
+	select ARM_GIC
+	select ARM_PSCI
+	select PINCTRL
+	select PINCTRL_SPPCTL
+	select SERIAL_SUNPLUS if TTY
+	select SERIAL_SUNPLUS_CONSOLE if TTY
+	help
+	  Support for Sunplus SP7021 SoC. It is based on ARM 4-core
+	  Cortex-A7 with various peripherals (e.g.: I2C, SPI, SDIO,
+	  Ethernet, etc.), FPGA interface,  chip-to-chip bus.
+	  It is designed for industrial control.
+
+endif
+
+config ARCH_UNIPHIER
+	bool "Socionext UniPhier SoCs"
+	depends on ARCH_MULTI_V7
+	select ARCH_HAS_RESET_CONTROLLER
+	select ARM_AMBA
+	select ARM_GLOBAL_TIMER
+	select ARM_GIC
+	select HAVE_ARM_SCU
+	select HAVE_ARM_TWD if SMP
+	select PINCTRL
+	select RESET_CONTROLLER
+	help
+	  Support for UniPhier SoC family developed by Socionext Inc.
+	  (formerly, System LSI Business Division of Panasonic Corporation)
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 847c31e7c368..b7de4b6b284c 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -22,6 +22,9 @@ GZFLAGS		:=-9
 # Never generate .eh_frame
 KBUILD_CFLAGS	+= $(call cc-option,-fno-dwarf2-cfi-asm)
 
+# Disable FDPIC ABI
+KBUILD_CFLAGS	+= $(call cc-option,-mno-fdpic)
+
 # This should work on most of the modern platforms
 KBUILD_DEFCONFIG := multi_v7_defconfig
 
@@ -57,47 +60,54 @@ endif
 KBUILD_CFLAGS	+= $(call cc-option,-fno-ipa-sra)
 
 # This selects which instruction set is used.
+arch-$(CONFIG_CPU_32v7M)	:=-march=armv7-m
+arch-$(CONFIG_CPU_32v7)		:=-march=armv7-a
+arch-$(CONFIG_CPU_32v6)		:=-march=armv6
+# Only override the compiler option if ARMv6. The ARMv6K extensions are
+# always available in ARMv7
+ifeq ($(CONFIG_CPU_32v6),y)
+arch-$(CONFIG_CPU_32v6K)	:=-march=armv6k
+endif
+arch-$(CONFIG_CPU_32v5)		:=-march=armv5te
+arch-$(CONFIG_CPU_32v4T)	:=-march=armv4t
+arch-$(CONFIG_CPU_32v4)		:=-march=armv4
+arch-$(CONFIG_CPU_32v3)		:=-march=armv3m
+
 # Note that GCC does not numerically define an architecture version
 # macro, but instead defines a whole series of macros which makes
 # testing for a specific architecture or later rather impossible.
-arch-$(CONFIG_CPU_32v7M)	=-D__LINUX_ARM_ARCH__=7 -march=armv7-m -Wa,-march=armv7-m
-arch-$(CONFIG_CPU_32v7)		=-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a)
-arch-$(CONFIG_CPU_32v6)		=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
+cpp-$(CONFIG_CPU_32v7M)		:=-D__LINUX_ARM_ARCH__=7
+cpp-$(CONFIG_CPU_32v7)		:=-D__LINUX_ARM_ARCH__=7
+cpp-$(CONFIG_CPU_32v6)		:=-D__LINUX_ARM_ARCH__=6
 # Only override the compiler option if ARMv6. The ARMv6K extensions are
 # always available in ARMv7
 ifeq ($(CONFIG_CPU_32v6),y)
-arch-$(CONFIG_CPU_32v6K)	=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6k,-march=armv5t -Wa$(comma)-march=armv6k)
+cpp-$(CONFIG_CPU_32v6K)		:=-D__LINUX_ARM_ARCH__=6
 endif
-arch-$(CONFIG_CPU_32v5)		=-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4t)
-arch-$(CONFIG_CPU_32v4T)	=-D__LINUX_ARM_ARCH__=4 -march=armv4t
-arch-$(CONFIG_CPU_32v4)		=-D__LINUX_ARM_ARCH__=4 -march=armv4
-arch-$(CONFIG_CPU_32v3)		=-D__LINUX_ARM_ARCH__=3 -march=armv3m
-
-# Evaluate arch cc-option calls now
-arch-y := $(arch-y)
+cpp-$(CONFIG_CPU_32v5)		:=-D__LINUX_ARM_ARCH__=5
+cpp-$(CONFIG_CPU_32v4T)		:=-D__LINUX_ARM_ARCH__=4
+cpp-$(CONFIG_CPU_32v4)		:=-D__LINUX_ARM_ARCH__=4
+cpp-$(CONFIG_CPU_32v3)		:=-D__LINUX_ARM_ARCH__=3
 
 # This selects how we optimise for the processor.
-tune-$(CONFIG_CPU_ARM7TDMI)	=-mtune=arm7tdmi
-tune-$(CONFIG_CPU_ARM720T)	=-mtune=arm7tdmi
-tune-$(CONFIG_CPU_ARM740T)	=-mtune=arm7tdmi
-tune-$(CONFIG_CPU_ARM9TDMI)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM940T)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM946E)	=$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi)
-tune-$(CONFIG_CPU_ARM920T)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM922T)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM925T)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM926T)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_FA526)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_SA110)	=-mtune=strongarm110
-tune-$(CONFIG_CPU_SA1100)	=-mtune=strongarm1100
-tune-$(CONFIG_CPU_XSCALE)	=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
-tune-$(CONFIG_CPU_XSC3)		=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
-tune-$(CONFIG_CPU_FEROCEON)	=$(call cc-option,-mtune=marvell-f,-mtune=xscale)
-tune-$(CONFIG_CPU_V6)		=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
-tune-$(CONFIG_CPU_V6K)		=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
-
-# Evaluate tune cc-option calls now
-tune-y := $(tune-y)
+tune-$(CONFIG_CPU_ARM7TDMI)	:=-mtune=arm7tdmi
+tune-$(CONFIG_CPU_ARM720T)	:=-mtune=arm7tdmi
+tune-$(CONFIG_CPU_ARM740T)	:=-mtune=arm7tdmi
+tune-$(CONFIG_CPU_ARM9TDMI)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_ARM940T)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_ARM946E)	:=-mtune=arm9e
+tune-$(CONFIG_CPU_ARM920T)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_ARM922T)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_ARM925T)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_ARM926T)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_FA526)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_SA110)	:=-mtune=strongarm110
+tune-$(CONFIG_CPU_SA1100)	:=-mtune=strongarm1100
+tune-$(CONFIG_CPU_XSCALE)	:=-mtune=xscale
+tune-$(CONFIG_CPU_XSC3)		:=-mtune=xscale
+tune-$(CONFIG_CPU_FEROCEON)	:=-mtune=xscale
+tune-$(CONFIG_CPU_V6)		:=-mtune=arm1136j-s
+tune-$(CONFIG_CPU_V6K)		:=-mtune=arm1136j-s
 
 ifeq ($(CONFIG_AEABI),y)
 CFLAGS_ABI	:=-mabi=aapcs-linux -mfpu=vfp
@@ -113,43 +123,50 @@ ifeq ($(CONFIG_CC_IS_CLANG),y)
 CFLAGS_ABI	+= -meabi gnu
 endif
 
+ifeq ($(CONFIG_CURRENT_POINTER_IN_TPIDRURO),y)
+KBUILD_CFLAGS	+= -mtp=cp15
+endif
+
 # Accept old syntax despite ".syntax unified"
 AFLAGS_NOWARN	:=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W)
 
+# The GCC option -ffreestanding is required in order to compile code containing
+# ARM/NEON intrinsics in a non C99-compliant environment (such as the kernel)
+CC_FLAGS_FPU	:= -ffreestanding
+# Enable <arm_neon.h>
+CC_FLAGS_FPU	+= -isystem $(shell $(CC) -print-file-name=include)
+CC_FLAGS_FPU	+= -march=armv7-a -mfloat-abi=softfp -mfpu=neon
+
 ifeq ($(CONFIG_THUMB2_KERNEL),y)
-CFLAGS_ISA	:=-mthumb -Wa,-mimplicit-it=always $(AFLAGS_NOWARN)
+CFLAGS_ISA	:=-Wa,-mimplicit-it=always $(AFLAGS_NOWARN)
 AFLAGS_ISA	:=$(CFLAGS_ISA) -Wa$(comma)-mthumb
+CFLAGS_ISA	+=-mthumb
 else
 CFLAGS_ISA	:=$(call cc-option,-marm,) $(AFLAGS_NOWARN)
 AFLAGS_ISA	:=$(CFLAGS_ISA)
 endif
 
 # Need -Uarm for gcc < 3.x
+KBUILD_CPPFLAGS	+=$(cpp-y)
 KBUILD_CFLAGS	+=$(CFLAGS_ABI) $(CFLAGS_ISA) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
-KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(AFLAGS_ISA) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float
+KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(AFLAGS_ISA) -Wa,$(arch-y) $(tune-y) -include $(srctree)/arch/arm/include/asm/unified.h -msoft-float
+KBUILD_RUSTFLAGS += --target=arm-unknown-linux-gnueabi
 
 CHECKFLAGS	+= -D__arm__
 
-#Default value
-head-y		:= arch/arm/kernel/head$(MMUEXT).o
-
 # Text offset. This list is sorted numerically by address in order to
 # provide a means to avoid/resolve conflicts in multi-arch kernels.
 # Note: the 32kB below this value is reserved for use by the kernel
 # during boot, and this offset is critical to the functioning of
 # kexec-tools.
 textofs-y	:= 0x00008000
-# We don't want the htc bootloader to corrupt kernel during resume
-textofs-$(CONFIG_PM_H1940)      := 0x00108000
 # RTD1195 has Boot ROM at start of address space
 textofs-$(CONFIG_ARCH_REALTEK)  := 0x00108000
 # SA1111 DMA bug: we don't want the kernel to live in precious DMA-able memory
 ifeq ($(CONFIG_ARCH_SA1100),y)
 textofs-$(CONFIG_SA1111) := 0x00208000
 endif
-textofs-$(CONFIG_ARCH_IPQ40XX) := 0x00208000
-textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000
-textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
+textofs-$(CONFIG_ARCH_QCOM_RESERVE_SMEM) := 0x00208000
 textofs-$(CONFIG_ARCH_MESON) := 0x00208000
 textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000
 
@@ -164,26 +181,20 @@ machine-$(CONFIG_ARCH_AXXIA)		+= axxia
 machine-$(CONFIG_ARCH_BCM)		+= bcm
 machine-$(CONFIG_ARCH_BERLIN)		+= berlin
 machine-$(CONFIG_ARCH_CLPS711X)		+= clps711x
-machine-$(CONFIG_ARCH_CNS3XXX)		+= cns3xxx
 machine-$(CONFIG_ARCH_DAVINCI)		+= davinci
 machine-$(CONFIG_ARCH_DIGICOLOR)	+= digicolor
 machine-$(CONFIG_ARCH_DOVE)		+= dove
-machine-$(CONFIG_ARCH_EP93XX)		+= ep93xx
 machine-$(CONFIG_ARCH_EXYNOS)		+= exynos
 machine-$(CONFIG_ARCH_FOOTBRIDGE)	+= footbridge
 machine-$(CONFIG_ARCH_GEMINI)		+= gemini
 machine-$(CONFIG_ARCH_HIGHBANK)		+= highbank
 machine-$(CONFIG_ARCH_HISI)		+= hisi
-machine-$(CONFIG_ARCH_INTEGRATOR)	+= integrator
-machine-$(CONFIG_ARCH_IOP32X)		+= iop32x
 machine-$(CONFIG_ARCH_IXP4XX)		+= ixp4xx
 machine-$(CONFIG_ARCH_KEYSTONE)		+= keystone
 machine-$(CONFIG_ARCH_LPC18XX)		+= lpc18xx
 machine-$(CONFIG_ARCH_LPC32XX)		+= lpc32xx
 machine-$(CONFIG_ARCH_MESON)		+= meson
 machine-$(CONFIG_ARCH_MMP)		+= mmp
-machine-$(CONFIG_ARCH_MPS2)		+= vexpress
-machine-$(CONFIG_ARCH_MOXART)		+= moxart
 machine-$(CONFIG_ARCH_MV78XX0)		+= mv78xx0
 machine-$(CONFIG_ARCH_MVEBU)		+= mvebu
 machine-$(CONFIG_ARCH_MXC)		+= imx
@@ -193,16 +204,12 @@ machine-$(CONFIG_ARCH_MXS)		+= mxs
 machine-$(CONFIG_ARCH_MSTARV7)		+= mstar
 machine-$(CONFIG_ARCH_NOMADIK)		+= nomadik
 machine-$(CONFIG_ARCH_NPCM)		+= npcm
-machine-$(CONFIG_ARCH_NSPIRE)		+= nspire
-machine-$(CONFIG_ARCH_OXNAS)		+= oxnas
 machine-$(CONFIG_ARCH_OMAP1)		+= omap1
 machine-$(CONFIG_ARCH_OMAP2PLUS)	+= omap2
 machine-$(CONFIG_ARCH_ORION5X)		+= orion5x
 machine-$(CONFIG_ARCH_PXA)		+= pxa
 machine-$(CONFIG_ARCH_QCOM)		+= qcom
-machine-$(CONFIG_ARCH_RDA)		+= rda
 machine-$(CONFIG_ARCH_REALTEK)		+= realtek
-machine-$(CONFIG_ARCH_REALVIEW)		+= realview
 machine-$(CONFIG_ARCH_ROCKCHIP)		+= rockchip
 machine-$(CONFIG_ARCH_RPC)		+= rpc
 machine-$(CONFIG_PLAT_SAMSUNG)		+= s3c
@@ -215,49 +222,29 @@ machine-$(CONFIG_ARCH_STM32)		+= stm32
 machine-$(CONFIG_ARCH_SUNXI)		+= sunxi
 machine-$(CONFIG_ARCH_TEGRA)		+= tegra
 machine-$(CONFIG_ARCH_U8500)		+= ux500
-machine-$(CONFIG_ARCH_VERSATILE)	+= versatile
-machine-$(CONFIG_ARCH_VEXPRESS)		+= vexpress
 machine-$(CONFIG_ARCH_VT8500)		+= vt8500
 machine-$(CONFIG_ARCH_ZYNQ)		+= zynq
+machine-$(CONFIG_PLAT_VERSATILE)	+= versatile
 machine-$(CONFIG_PLAT_SPEAR)		+= spear
 
-# Platform directory name.  This list is sorted alphanumerically
-# by CONFIG_* macro name.
-plat-$(CONFIG_ARCH_OMAP)	+= omap
-plat-$(CONFIG_PLAT_ORION)	+= orion
-plat-$(CONFIG_PLAT_PXA)		+= pxa
-plat-$(CONFIG_PLAT_VERSATILE)	+= versatile
+# legacy platforms provide their own mach/*.h headers globally,
+# these three are mutually exclusive
+machdirs-$(CONFIG_ARCH_FOOTBRIDGE)	+= arch/arm/mach-footbridge
+machdirs-$(CONFIG_ARCH_RPC)		+= arch/arm/mach-rpc
+machdirs-$(CONFIG_ARCH_SA1100)		+= arch/arm/mach-sa1100
+KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%/include,$(machdirs-y))
 
 # The byte offset of the kernel image in RAM from the start of RAM.
 TEXT_OFFSET := $(textofs-y)
 
-# The first directory contains additional information for the boot setup code
-ifneq ($(machine-y),)
-MACHINE  := arch/arm/mach-$(word 1,$(machine-y))/
-else
-MACHINE  :=
-endif
-ifeq ($(CONFIG_ARCH_MULTIPLATFORM),y)
-MACHINE  :=
-endif
-
-machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
-platdirs := $(patsubst %,arch/arm/plat-%/,$(sort $(plat-y)))
-
-ifneq ($(CONFIG_ARCH_MULTIPLATFORM),y)
-ifneq ($(CONFIG_ARM_SINGLE_ARMV7M),y)
-KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%include,$(machdirs) $(platdirs))
-endif
-endif
-
 export	TEXT_OFFSET GZFLAGS MMUEXT
 
 # If we have a machine-specific directory, then include it in the build.
-core-y				+= $(machdirs) $(platdirs)
-
+core-y				+= $(patsubst %,arch/arm/mach-%/,$(machine-y))
 # For cleaning
-core-				+= $(patsubst %,arch/arm/mach-%/, $(machine-))
-core-				+= $(patsubst %,arch/arm/plat-%/, $(plat-))
+core-				+= $(patsubst %,arch/arm/mach-%/,$(machine-))
+
+core-$(CONFIG_PLAT_ORION)	+= arch/arm/plat-orion/
 
 libs-y				:= arch/arm/lib/ $(libs-y)
 
@@ -271,17 +258,23 @@ endif
 
 ifeq ($(CONFIG_STACKPROTECTOR_PER_TASK),y)
 prepare: stack_protector_prepare
+ifeq ($(CONFIG_CC_HAVE_STACKPROTECTOR_TLS),y)
+stack_protector_prepare: prepare0
+	$(eval KBUILD_CFLAGS += \
+		-mstack-protector-guard=tls \
+		-mstack-protector-guard-offset=$(shell	\
+			awk '{if ($$2 == "TSK_STACK_CANARY") print $$3;}'\
+				$(objtree)/include/generated/asm-offsets.h))
+else
 stack_protector_prepare: prepare0
 	$(eval SSP_PLUGIN_CFLAGS := \
-		-fplugin-arg-arm_ssp_per_task_plugin-tso=$(shell	\
-			awk '{if ($$2 == "THREAD_SZ_ORDER") print $$3;}'\
-				include/generated/asm-offsets.h)	\
 		-fplugin-arg-arm_ssp_per_task_plugin-offset=$(shell	\
-			awk '{if ($$2 == "TI_STACK_CANARY") print $$3;}'\
-				include/generated/asm-offsets.h))
+			awk '{if ($$2 == "TSK_STACK_CANARY") print $$3;}'\
+				$(objtree)/include/generated/asm-offsets.h))
 	$(eval KBUILD_CFLAGS += $(SSP_PLUGIN_CFLAGS))
 	$(eval GCC_PLUGINS_CFLAGS += $(SSP_PLUGIN_CFLAGS))
 endif
+endif
 
 all:	$(notdir $(KBUILD_IMAGE))
 
@@ -304,26 +297,22 @@ bootpImage uImage: zImage
 zImage: Image
 
 $(BOOT_TARGETS): vmlinux
-	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
+	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 	@$(kecho) '  Kernel: $(boot)/$@ is ready'
 
+$(INSTALL_TARGETS): KBUILD_IMAGE = $(boot)/$(patsubst %install,%Image,$@)
 $(INSTALL_TARGETS):
-	$(CONFIG_SHELL) $(srctree)/$(boot)/install.sh "$(KERNELRELEASE)" \
-	$(boot)/$(patsubst %install,%Image,$@) System.map "$(INSTALL_PATH)"
-
-PHONY += vdso_install
-vdso_install:
-ifeq ($(CONFIG_VDSO),y)
-	$(Q)$(MAKE) $(build)=arch/arm/vdso $@
-endif
+	$(call cmd,install)
 
-# We use MRPROPER_FILES and CLEAN_FILES now
-archclean:
-	$(Q)$(MAKE) $(clean)=$(boot)
+vdso-install-$(CONFIG_VDSO) += arch/arm/vdso/vdso.so.dbg
 
 # My testing targets (bypasses dependencies)
-bp:;	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/bootpImage
+bp:;	$(Q)$(MAKE) $(build)=$(boot) $(boot)/bootpImage
 
+include $(srctree)/scripts/Makefile.defconf
+PHONY += multi_v7_lpae_defconfig
+multi_v7_lpae_defconfig:
+	$(call merge_into_defconfig,multi_v7_defconfig,lpae)
 
 define archhelp
   echo  '* zImage        - Compressed kernel image (arch/$(ARCH)/boot/zImage)'
@@ -338,5 +327,6 @@ define archhelp
   echo  '                  Install using (your) ~/bin/$(INSTALLKERNEL) or'
   echo  '                  (distribution) /sbin/$(INSTALLKERNEL) or'
   echo  '                  install to $$(INSTALL_PATH) and run lilo'
-  echo  '  vdso_install  - Install unstripped vdso.so to $$(INSTALL_MOD_PATH)/vdso'
+  echo
+  echo  '  multi_v7_lpae_defconfig     - multi_v7_defconfig with CONFIG_ARM_LPAE enabled'
 endef
diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index 54a09f9464fb..ba9b9a802469 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -10,29 +10,22 @@
 #
 # Copyright (C) 1995-2002 Russell King
 #
-
 OBJCOPYFLAGS	:=-O binary -R .comment -S
 
-ifneq ($(MACHINE),)
-include $(MACHINE)/Makefile.boot
-endif
-
-# Note: the following conditions must always be true:
 #   ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET)
-#   PARAMS_PHYS must be within 4MB of ZRELADDR
-#   INITRD_PHYS must be in RAM
-ZRELADDR    := $(zreladdr-y)
-PARAMS_PHYS := $(params_phys-y)
-INITRD_PHYS := $(initrd_phys-y)
+ifdef CONFIG_PHYS_OFFSET
+add_hex = $(shell printf 0x%x $$(( $(1) + $(2) )) )
+ZRELADDR    := $(call add_hex, $(CONFIG_PHYS_OFFSET), $(TEXT_OFFSET))
+endif
 
-export ZRELADDR INITRD_PHYS PARAMS_PHYS
+PHYS_OFFSET := $(CONFIG_PHYS_OFFSET)
+export ZRELADDR PARAMS_PHYS PHYS_OFFSET
 
 targets := Image zImage xipImage bootpImage uImage
 
 ifeq ($(CONFIG_XIP_KERNEL),y)
 
-cmd_deflate_xip_data = $(CONFIG_SHELL) -c \
-	'$(srctree)/$(src)/deflate_xip_data.sh $< $@'
+cmd_deflate_xip_data = $(CONFIG_SHELL) -c '$(src)/deflate_xip_data.sh $< $@'
 
 ifeq ($(CONFIG_XIP_DEFLATED_DATA),y)
 quiet_cmd_mkxip = XIPZ    $@
@@ -90,17 +83,10 @@ $(obj)/uImage:	$(obj)/zImage FORCE
 	@$(check_for_multiple_loadaddr)
 	$(call if_changed,uimage)
 
-$(obj)/bootp/bootp: $(obj)/zImage initrd FORCE
+$(obj)/bootp/bootp: $(obj)/zImage FORCE
 	$(Q)$(MAKE) $(build)=$(obj)/bootp $@
 
 $(obj)/bootpImage: $(obj)/bootp/bootp FORCE
 	$(call if_changed,objcopy)
 
-PHONY += initrd
-initrd:
-	@test "$(INITRD_PHYS)" != "" || \
-	(echo This machine does not support INITRD; exit -1)
-	@test "$(INITRD)" != "" || \
-	(echo You must specify INITRD; exit -1)
-
 subdir-	    := bootp compressed dts
diff --git a/arch/arm/boot/bootp/Makefile b/arch/arm/boot/bootp/Makefile
index 981a8d03f064..f3443f7d7b02 100644
--- a/arch/arm/boot/bootp/Makefile
+++ b/arch/arm/boot/bootp/Makefile
@@ -6,7 +6,37 @@
 # architecture-specific flags and dependencies.
 #
 
-GCOV_PROFILE	:= n
+ifdef PHYS_OFFSET
+add_hex = $(shell printf 0x%x $$(( $(1) + $(2) )) )
+
+# If PHYS_OFFSET is set, INITRD_PHYS and PARAMS_PHYS can be derived,
+# otherwise they must be passed on the command line.
+#
+# Note: the following conditions must always be true:
+#   PARAMS_PHYS must be within 4MB of ZRELADDR
+#   INITRD_PHYS must be in RAM
+
+PARAMS_PHYS := $(call add_hex, $(PHYS_OFFSET), 0x100)
+
+# guess an initrd location if possible
+initrd_offset-$(CONFIG_ARCH_FOOTBRIDGE)	+= 0x00800000
+initrd_offset-$(CONFIG_ARCH_SA1100)	+= 0x00800000
+initrd_offset-$(CONFIG_ARCH_RPC)	+= 0x08000000
+INITRD_OFFSET := $(initrd_offset-y)
+ifdef INITRD_OFFSET
+INITRD_PHYS := $(call add_hex, $(PHYS_OFFSET), $(INITRD_OFFSET))
+endif
+
+endif
+
+PHONY += initrd
+initrd:
+	@test "$(PARAMS_PHYS)" != "" || \
+	(echo bootpImage: You must specify PHYS_OFFSET of PARAMS_PHYS ; exit -1)
+	@test "$(INITRD_PHYS)" != "" || \
+	(echo bootpImage: You must specify INITRD_OFFSET or INITRD_PHYS ; exit -1)
+	@test "$(INITRD)" != "" || \
+	(echo bootpImage: You must specify INITRD; exit -1)
 
 LDFLAGS_bootp	:= --no-undefined -X \
 		 --defsym initrd_phys=$(INITRD_PHYS) \
@@ -24,6 +54,6 @@ $(obj)/bootp:	$(src)/bootp.lds $(addprefix $(obj)/,init.o kernel.o initrd.o) FOR
 
 $(obj)/kernel.o: arch/arm/boot/zImage FORCE
 
-$(obj)/initrd.o: $(INITRD) FORCE
+$(obj)/initrd.o: initrd $(INITRD) FORCE
 
 PHONY += $(INITRD)
diff --git a/arch/arm/boot/bootp/bootp.lds b/arch/arm/boot/bootp/bootp.lds
index fc54394f4340..160128186bf8 100644
--- a/arch/arm/boot/bootp/bootp.lds
+++ b/arch/arm/boot/bootp/bootp.lds
@@ -1,11 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  *  linux/arch/arm/boot/bootp/bootp.lds
  *
  *  Copyright (C) 2000-2002 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 OUTPUT_ARCH(arm)
 ENTRY(_start)
diff --git a/arch/arm/boot/compressed/.gitignore b/arch/arm/boot/compressed/.gitignore
index 60606b0f378d..d32f41778437 100644
--- a/arch/arm/boot/compressed/.gitignore
+++ b/arch/arm/boot/compressed/.gitignore
@@ -1,9 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0-only
-ashldi3.S
-bswapsdi2.S
-font.c
-lib1funcs.S
-hyp-stub.S
 piggy_data
 vmlinux
 vmlinux.lds
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 91265e7ff672..a159120d1e42 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -13,7 +13,6 @@ ifeq ($(CONFIG_DEBUG_UNCOMPRESS),y)
 OBJS	+= debug.o
 AFLAGS_head.o += -DDEBUG
 endif
-FONTC	= $(srctree)/lib/fonts/font_acorn_8x8.c
 
 # string library code (-Os is enforced to keep it much smaller)
 OBJS		+= string.o
@@ -23,12 +22,6 @@ ifeq ($(CONFIG_ARM_VIRT_EXT),y)
 OBJS		+= hyp-stub.o
 endif
 
-GCOV_PROFILE		:= n
-KASAN_SANITIZE		:= n
-
-# Prevents link failures: __sanitizer_cov_trace_pc() is not linked in.
-KCOV_INSTRUMENT		:= n
-
 #
 # Architecture dependencies
 #
@@ -77,10 +70,10 @@ CPPFLAGS_vmlinux.lds += -DTEXT_OFFSET="$(TEXT_OFFSET)"
 CPPFLAGS_vmlinux.lds += -DMALLOC_SIZE="$(MALLOC_SIZE)"
 
 compress-$(CONFIG_KERNEL_GZIP) = gzip
-compress-$(CONFIG_KERNEL_LZO)  = lzo
-compress-$(CONFIG_KERNEL_LZMA) = lzma
-compress-$(CONFIG_KERNEL_XZ)   = xzkern
-compress-$(CONFIG_KERNEL_LZ4)  = lz4
+compress-$(CONFIG_KERNEL_LZO)  = lzo_with_size
+compress-$(CONFIG_KERNEL_LZMA) = lzma_with_size
+compress-$(CONFIG_KERNEL_XZ)   = xzkern_with_size
+compress-$(CONFIG_KERNEL_LZ4)  = lz4_with_size
 
 libfdt_objs := fdt_rw.o fdt_ro.o fdt_wip.o fdt.o
 
@@ -93,26 +86,22 @@ ifeq ($(CONFIG_USE_OF),y)
 OBJS	+= $(libfdt_objs) fdt_check_mem_start.o
 endif
 
-# -fstack-protector-strong triggers protection checks in this code,
-# but it is being used too early to link to meaningful stack_chk logic.
-$(foreach o, $(libfdt_objs) atags_to_fdt.o fdt_check_mem_start.o, \
-	$(eval CFLAGS_$(o) := -I $(srctree)/scripts/dtc/libfdt -fno-stack-protector))
+OBJS	+= lib1funcs.o ashldi3.o bswapsdi2.o
 
 targets       := vmlinux vmlinux.lds piggy_data piggy.o \
-		 lib1funcs.o ashldi3.o bswapsdi2.o \
 		 head.o $(OBJS)
 
-clean-files += lib1funcs.S ashldi3.S bswapsdi2.S hyp-stub.S
-
 KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING
 
 ccflags-y := -fpic $(call cc-option,-mno-single-pic-base,) -fno-builtin \
-	     -I$(obj) $(DISABLE_ARM_SSP_PER_TASK_PLUGIN)
+	     -I$(srctree)/scripts/dtc/libfdt -fno-stack-protector \
+	     $(DISABLE_KSTACK_ERASE) \
+	     -I$(obj)
 ccflags-remove-$(CONFIG_FUNCTION_TRACER) += -pg
 asflags-y := -DZIMAGE
 
 # Supply kernel BSS size to the decompressor via a linker symbol.
-KBSS_SZ = $(shell echo $$(($$($(NM) $(obj)/../../../../vmlinux | \
+KBSS_SZ = $(shell echo $$(($$($(NM) vmlinux | \
 		sed -n -e 's/^\([^ ]*\) [ABD] __bss_start$$/-0x\1/p' \
 		       -e 's/^\([^ ]*\) [ABD] __bss_stop$$/+0x\1/p') )) )
 LDFLAGS_vmlinux = --defsym _kernel_bss_size=$(KBSS_SZ)
@@ -129,29 +118,11 @@ LDFLAGS_vmlinux += --no-undefined
 LDFLAGS_vmlinux += -X
 # Report orphan sections
 ifdef CONFIG_LD_ORPHAN_WARN
-LDFLAGS_vmlinux += --orphan-handling=warn
+LDFLAGS_vmlinux += --orphan-handling=$(CONFIG_LD_ORPHAN_WARN_LEVEL)
 endif
 # Next argument is a linker script
 LDFLAGS_vmlinux += -T
 
-# For __aeabi_uidivmod
-lib1funcs = $(obj)/lib1funcs.o
-
-$(obj)/lib1funcs.S: $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S
-	$(call cmd,shipped)
-
-# For __aeabi_llsl
-ashldi3 = $(obj)/ashldi3.o
-
-$(obj)/ashldi3.S: $(srctree)/arch/$(SRCARCH)/lib/ashldi3.S
-	$(call cmd,shipped)
-
-# For __bswapsi2, __bswapdi2
-bswapsdi2 = $(obj)/bswapsdi2.o
-
-$(obj)/bswapsdi2.S: $(srctree)/arch/$(SRCARCH)/lib/bswapsdi2.S
-	$(call cmd,shipped)
-
 # We need to prevent any GOTOFF relocs being used with references
 # to symbols in the .bss section since we cannot relocate them
 # independently from the rest at run time.  This can be achieved by
@@ -175,8 +146,8 @@ fi
 efi-obj-$(CONFIG_EFI_STUB) := $(objtree)/drivers/firmware/efi/libstub/lib.a
 
 $(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.o \
-		$(addprefix $(obj)/, $(OBJS)) $(lib1funcs) $(ashldi3) \
-		$(bswapsdi2) $(efi-obj-y) FORCE
+		$(addprefix $(obj)/, $(OBJS)) \
+		$(efi-obj-y) FORCE
 	@$(check_for_multiple_zreladdr)
 	$(call if_changed,ld)
 	@$(check_for_bad_syms)
@@ -187,11 +158,3 @@ $(obj)/piggy_data: $(obj)/../Image FORCE
 $(obj)/piggy.o: $(obj)/piggy_data
 
 CFLAGS_font.o := -Dstatic=
-
-$(obj)/font.c: $(FONTC)
-	$(call cmd,shipped)
-
-AFLAGS_hyp-stub.o := -Wa,-march=armv7-a
-
-$(obj)/hyp-stub.S: $(srctree)/arch/$(SRCARCH)/kernel/hyp-stub.S
-	$(call cmd,shipped)
diff --git a/arch/arm/boot/compressed/ashldi3.S b/arch/arm/boot/compressed/ashldi3.S
new file mode 100644
index 000000000000..216f82eda609
--- /dev/null
+++ b/arch/arm/boot/compressed/ashldi3.S
@@ -0,0 +1,3 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* For __aeabi_llsl */
+#include "../../lib/ashldi3.S"
diff --git a/arch/arm/boot/compressed/atags_to_fdt.c b/arch/arm/boot/compressed/atags_to_fdt.c
index 1feb6b0f7a1f..627752f18661 100644
--- a/arch/arm/boot/compressed/atags_to_fdt.c
+++ b/arch/arm/boot/compressed/atags_to_fdt.c
@@ -2,6 +2,7 @@
 #include <linux/libfdt_env.h>
 #include <asm/setup.h>
 #include <libfdt.h>
+#include "misc.h"
 
 #if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND)
 #define do_extend_cmdline 1
diff --git a/arch/arm/boot/compressed/bswapsdi2.S b/arch/arm/boot/compressed/bswapsdi2.S
new file mode 100644
index 000000000000..b2156b378c7b
--- /dev/null
+++ b/arch/arm/boot/compressed/bswapsdi2.S
@@ -0,0 +1,3 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* For __bswapsi2, __bswapdi2 */
+#include "../../lib/bswapsdi2.S"
diff --git a/arch/arm/boot/compressed/decompress.c b/arch/arm/boot/compressed/decompress.c
index aa075d8372ea..0669851394f0 100644
--- a/arch/arm/boot/compressed/decompress.c
+++ b/arch/arm/boot/compressed/decompress.c
@@ -31,6 +31,7 @@
 /* Not needed, but used in some headers pulled in by decompressors */
 extern char * strstr(const char * s1, const char *s2);
 extern size_t strlen(const char *s);
+extern int strcmp(const char *cs, const char *ct);
 extern int memcmp(const void *cs, const void *ct, size_t count);
 extern char * strchrnul(const char *, int);
 
@@ -47,7 +48,10 @@ extern char * strchrnul(const char *, int);
 #endif
 
 #ifdef CONFIG_KERNEL_XZ
+/* Prevent KASAN override of string helpers in decompressor */
+#undef memmove
 #define memmove memmove
+#undef memcpy
 #define memcpy memcpy
 #include "../../../../lib/decompress_unxz.c"
 #endif
diff --git a/arch/arm/boot/compressed/efi-header.S b/arch/arm/boot/compressed/efi-header.S
index c0e7a745103e..65a3025c0e13 100644
--- a/arch/arm/boot/compressed/efi-header.S
+++ b/arch/arm/boot/compressed/efi-header.S
@@ -9,16 +9,22 @@
 #include <linux/sizes.h>
 
 		.macro	__nop
-#ifdef CONFIG_EFI_STUB
-		@ This is almost but not quite a NOP, since it does clobber the
-		@ condition flags. But it is the best we can do for EFI, since
-		@ PE/COFF expects the magic string "MZ" at offset 0, while the
-		@ ARM/Linux boot protocol expects an executable instruction
-		@ there.
-		.inst	MZ_MAGIC | (0x1310 << 16)	@ tstne r0, #0x4d000
-#else
  AR_CLASS(	mov	r0, r0		)
   M_CLASS(	nop.w			)
+		.endm
+
+		.macro __initial_nops
+#ifdef CONFIG_EFI_STUB
+		@ This is a two-instruction NOP, which happens to bear the
+		@ PE/COFF signature "MZ" in the first two bytes, so the kernel
+		@ is accepted as an EFI binary. Booting via the UEFI stub
+		@ will not execute those instructions, but the ARM/Linux
+		@ boot protocol does, so we need some NOPs here.
+		.inst	IMAGE_DOS_SIGNATURE | (0xe225 << 16) @ eor r5, r5, 0x4d000
+		eor	r5, r5, 0x4d000			@ undo previous insn
+#else
+		__nop
+		__nop
 #endif
 		.endm
 
@@ -37,7 +43,7 @@
 		.long	pe_header - start		@ Offset to the PE header.
 
 pe_header:
-		.long	PE_MAGIC
+		.long	IMAGE_NT_SIGNATURE
 
 coff_header:
 		.short	IMAGE_FILE_MACHINE_THUMB	@ Machine
@@ -54,7 +60,7 @@ coff_header:
 #define __pecoff_code_size (__pecoff_data_start - __efi_start)
 
 optional_header:
-		.short	PE_OPT_MAGIC_PE32		@ PE32 format
+		.short	IMAGE_NT_OPTIONAL_HDR32_MAGIC	@ PE32 format
 		.byte	0x02				@ MajorLinkerVersion
 		.byte	0x14				@ MinorLinkerVersion
 		.long	__pecoff_code_size		@ SizeOfCode
diff --git a/arch/arm/boot/compressed/fdt_check_mem_start.c b/arch/arm/boot/compressed/fdt_check_mem_start.c
index 62450d824c3c..aa856567fd33 100644
--- a/arch/arm/boot/compressed/fdt_check_mem_start.c
+++ b/arch/arm/boot/compressed/fdt_check_mem_start.c
@@ -3,6 +3,7 @@
 #include <linux/kernel.h>
 #include <linux/libfdt.h>
 #include <linux/sizes.h>
+#include "misc.h"
 
 static const void *get_prop(const void *fdt, const char *node_path,
 			    const char *property, int minlen)
@@ -55,16 +56,17 @@ static uint64_t get_val(const fdt32_t *cells, uint32_t ncells)
  * DTB, and, if out-of-range, replace it by the real start address.
  * To preserve backwards compatibility (systems reserving a block of memory
  * at the start of physical memory, kdump, ...), the traditional method is
- * always used if it yields a valid address.
+ * used if it yields a valid address, unless the "linux,usable-memory-range"
+ * property is present.
  *
  * Return value: start address of physical memory to use
  */
 uint32_t fdt_check_mem_start(uint32_t mem_start, const void *fdt)
 {
-	uint32_t addr_cells, size_cells, base;
+	uint32_t addr_cells, size_cells, usable_base, base;
 	uint32_t fdt_mem_start = 0xffffffff;
-	const fdt32_t *reg, *endp;
-	uint64_t size, end;
+	const fdt32_t *usable, *reg, *endp;
+	uint64_t size, usable_end, end;
 	const char *type;
 	int offset, len;
 
@@ -80,6 +82,27 @@ uint32_t fdt_check_mem_start(uint32_t mem_start, const void *fdt)
 	if (addr_cells > 2 || size_cells > 2)
 		return mem_start;
 
+	/*
+	 * Usable memory in case of a crash dump kernel
+	 * This property describes a limitation: memory within this range is
+	 * only valid when also described through another mechanism
+	 */
+	usable = get_prop(fdt, "/chosen", "linux,usable-memory-range",
+			  (addr_cells + size_cells) * sizeof(fdt32_t));
+	if (usable) {
+		size = get_val(usable + addr_cells, size_cells);
+		if (!size)
+			return mem_start;
+
+		if (addr_cells > 1 && fdt32_ld(usable)) {
+			/* Outside 32-bit address space */
+			return mem_start;
+		}
+
+		usable_base = fdt32_ld(usable + addr_cells - 1);
+		usable_end = usable_base + size;
+	}
+
 	/* Walk all memory nodes and regions */
 	for (offset = fdt_next_node(fdt, -1, NULL); offset >= 0;
 	     offset = fdt_next_node(fdt, offset, NULL)) {
@@ -107,7 +130,20 @@ uint32_t fdt_check_mem_start(uint32_t mem_start, const void *fdt)
 
 			base = fdt32_ld(reg + addr_cells - 1);
 			end = base + size;
-			if (mem_start >= base && mem_start < end) {
+			if (usable) {
+				/*
+				 * Clip to usable range, which takes precedence
+				 * over mem_start
+				 */
+				if (base < usable_base)
+					base = usable_base;
+
+				if (end > usable_end)
+					end = usable_end;
+
+				if (end <= base)
+					continue;
+			} else if (mem_start >= base && mem_start < end) {
 				/* Calculated address is valid, use it */
 				return mem_start;
 			}
@@ -123,7 +159,8 @@ uint32_t fdt_check_mem_start(uint32_t mem_start, const void *fdt)
 	}
 
 	/*
-	 * The calculated address is not usable.
+	 * The calculated address is not usable, or was overridden by the
+	 * "linux,usable-memory-range" property.
 	 * Use the lowest usable physical memory address from the DTB instead,
 	 * and make sure this is a multiple of 2 MiB for phys/virt patching.
 	 */
diff --git a/arch/arm/boot/compressed/font.c b/arch/arm/boot/compressed/font.c
new file mode 100644
index 000000000000..46a677649db4
--- /dev/null
+++ b/arch/arm/boot/compressed/font.c
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "../../../../lib/fonts/font_acorn_8x8.c"
diff --git a/arch/arm/boot/compressed/head-sa1100.S b/arch/arm/boot/compressed/head-sa1100.S
index 95abdd850fe3..23eae1a65064 100644
--- a/arch/arm/boot/compressed/head-sa1100.S
+++ b/arch/arm/boot/compressed/head-sa1100.S
@@ -20,10 +20,6 @@ __SA1100_start:
 #ifdef CONFIG_SA1100_COLLIE
 		mov	r7, #MACH_TYPE_COLLIE
 #endif
-#ifdef CONFIG_SA1100_SIMPAD
-		@ UNTIL we've something like an open bootldr
-		mov	r7, #MACH_TYPE_SIMPAD	@should be 87
-#endif
 		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
 		ands	r0, r0, #0x0d
 		beq	99f
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index b1cb1972361b..9f406e9c0ea6 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -67,11 +67,7 @@
 #if defined(CONFIG_ARCH_SA1100)
 		.macro	loadsp, rb, tmp1, tmp2
 		mov	\rb, #0x80000000	@ physical base address
-#ifdef CONFIG_DEBUG_LL_SER3
-		add	\rb, \rb, #0x00050000	@ Ser3
-#else
 		add	\rb, \rb, #0x00010000	@ Ser1
-#endif
 		.endm
 #else
 		.macro	loadsp,	rb, tmp1, tmp2
@@ -203,7 +199,8 @@ start:
 		 * were patching the initial instructions of the kernel, i.e
 		 * had started to exploit this "patch area".
 		 */
-		.rept	7
+		__initial_nops
+		.rept	5
 		__nop
 		.endr
 #ifndef CONFIG_THUMB2_KERNEL
diff --git a/arch/arm/boot/compressed/hyp-stub.S b/arch/arm/boot/compressed/hyp-stub.S
new file mode 100644
index 000000000000..a703eaa86f10
--- /dev/null
+++ b/arch/arm/boot/compressed/hyp-stub.S
@@ -0,0 +1,2 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#include "../../kernel/hyp-stub.S"
diff --git a/arch/arm/boot/compressed/lib1funcs.S b/arch/arm/boot/compressed/lib1funcs.S
new file mode 100644
index 000000000000..815dec73ba4d
--- /dev/null
+++ b/arch/arm/boot/compressed/lib1funcs.S
@@ -0,0 +1,3 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* For __aeabi_uidivmod */
+#include "../../lib/lib1funcs.S"
diff --git a/arch/arm/boot/compressed/misc-ep93xx.h b/arch/arm/boot/compressed/misc-ep93xx.h
new file mode 100644
index 000000000000..65b4121d1490
--- /dev/null
+++ b/arch/arm/boot/compressed/misc-ep93xx.h
@@ -0,0 +1,75 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ */
+
+#include <asm/mach-types.h>
+
+static inline unsigned int __raw_readl(unsigned int ptr)
+{
+	return *((volatile unsigned int *)ptr);
+}
+
+static inline void __raw_writeb(unsigned char value, unsigned int ptr)
+{
+	*((volatile unsigned char *)ptr) = value;
+}
+
+static inline void __raw_writel(unsigned int value, unsigned int ptr)
+{
+	*((volatile unsigned int *)ptr) = value;
+}
+
+/*
+ * Some bootloaders don't turn off DMA from the ethernet MAC before
+ * jumping to linux, which means that we might end up with bits of RX
+ * status and packet data scribbled over the uncompressed kernel image.
+ * Work around this by resetting the ethernet MAC before we uncompress.
+ */
+#define PHYS_ETH_SELF_CTL		0x80010020
+#define ETH_SELF_CTL_RESET		0x00000001
+
+static inline void ep93xx_ethernet_reset(void)
+{
+	unsigned int v;
+
+	/* Reset the ethernet MAC.  */
+	v = __raw_readl(PHYS_ETH_SELF_CTL);
+	__raw_writel(v | ETH_SELF_CTL_RESET, PHYS_ETH_SELF_CTL);
+
+	/* Wait for reset to finish.  */
+	while (__raw_readl(PHYS_ETH_SELF_CTL) & ETH_SELF_CTL_RESET)
+		;
+}
+
+#define TS72XX_WDT_CONTROL_PHYS_BASE	0x23800000
+#define TS72XX_WDT_FEED_PHYS_BASE	0x23c00000
+#define TS72XX_WDT_FEED_VAL		0x05
+
+static inline void __maybe_unused ts72xx_watchdog_disable(void)
+{
+	__raw_writeb(TS72XX_WDT_FEED_VAL, TS72XX_WDT_FEED_PHYS_BASE);
+	__raw_writeb(0, TS72XX_WDT_CONTROL_PHYS_BASE);
+}
+
+static inline void ep93xx_decomp_setup(void)
+{
+	if (machine_is_ts72xx())
+		ts72xx_watchdog_disable();
+
+	if (machine_is_edb9301() ||
+	    machine_is_edb9302() ||
+	    machine_is_edb9302a() ||
+	    machine_is_edb9302a() ||
+	    machine_is_edb9307() ||
+	    machine_is_edb9307a() ||
+	    machine_is_edb9307a() ||
+	    machine_is_edb9312() ||
+	    machine_is_edb9315() ||
+	    machine_is_edb9315a() ||
+	    machine_is_edb9315a() ||
+	    machine_is_ts72xx() ||
+	    machine_is_bk3() ||
+	    machine_is_vision_ep9307())
+		ep93xx_ethernet_reset();
+}
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index e1e9a5dde853..6c41b270560e 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -23,6 +23,9 @@ unsigned int __machine_arch_type;
 #include <linux/types.h>
 #include <linux/linkage.h>
 #include "misc.h"
+#ifdef CONFIG_ARCH_EP93XX
+#include "misc-ep93xx.h"
+#endif
 
 static void putstr(const char *ptr);
 
@@ -100,9 +103,6 @@ static void putstr(const char *ptr)
 /*
  * gzip declarations
  */
-extern char input_data[];
-extern char input_data_end[];
-
 unsigned char *output_data;
 
 unsigned long free_mem_ptr;
@@ -128,16 +128,6 @@ asmlinkage void __div0(void)
 	error("Attempting division by 0!");
 }
 
-const unsigned long __stack_chk_guard = 0x000a0dff;
-
-void __stack_chk_fail(void)
-{
-	error("stack-protector: Kernel stack is corrupted\n");
-}
-
-extern int do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x));
-
-
 void
 decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
 		unsigned long free_mem_ptr_end_p,
@@ -150,6 +140,9 @@ decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
 	free_mem_end_ptr	= free_mem_ptr_end_p;
 	__machine_arch_type	= arch_id;
 
+#ifdef CONFIG_ARCH_EP93XX
+	ep93xx_decomp_setup();
+#endif
 	arch_decomp_setup();
 
 	putstr("Uncompressing Linux...");
@@ -161,7 +154,7 @@ decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
 		putstr(" done, booting the kernel.\n");
 }
 
-void fortify_panic(const char *name)
+void __fortify_panic(const u8 reason, size_t avail, size_t size)
 {
 	error("detected buffer overflow");
 }
diff --git a/arch/arm/boot/compressed/misc.h b/arch/arm/boot/compressed/misc.h
index c958dccd1d97..8c73940b5fe4 100644
--- a/arch/arm/boot/compressed/misc.h
+++ b/arch/arm/boot/compressed/misc.h
@@ -6,5 +6,16 @@
 void error(char *x) __noreturn;
 extern unsigned long free_mem_ptr;
 extern unsigned long free_mem_end_ptr;
+void __div0(void);
+void
+decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
+		  unsigned long free_mem_ptr_end_p, int arch_id);
+void __fortify_panic(const u8 reason, size_t avail, size_t size);
+int atags_to_fdt(void *atag_list, void *fdt, int total_space);
+uint32_t fdt_check_mem_start(uint32_t mem_start, const void *fdt);
+int do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x));
+
+extern char input_data[];
+extern char input_data_end[];
 
 #endif
diff --git a/arch/arm/boot/compressed/string.c b/arch/arm/boot/compressed/string.c
index 8c0fa276d994..fcc678fce045 100644
--- a/arch/arm/boot/compressed/string.c
+++ b/arch/arm/boot/compressed/string.c
@@ -5,6 +5,7 @@
  * Small subset of simple string routines
  */
 
+#define __NO_FORTIFY
 #include <linux/string.h>
 
 /*
diff --git a/arch/arm/boot/compressed/vmlinux.lds.S b/arch/arm/boot/compressed/vmlinux.lds.S
index 1bcb68ac4b01..d411abd4310e 100644
--- a/arch/arm/boot/compressed/vmlinux.lds.S
+++ b/arch/arm/boot/compressed/vmlinux.lds.S
@@ -23,6 +23,7 @@ SECTIONS
     *(.ARM.extab*)
     *(.note.*)
     *(.rel.*)
+    *(.printk_index)
     /*
      * Discard any r/w data - this produces a link error if we have any,
      * which is required for PIC decompression.  Local data generates
@@ -57,6 +58,7 @@ SECTIONS
     *(.rodata)
     *(.rodata.*)
     *(.data.rel.ro)
+    *(.data.rel.ro.*)
   }
   .piggydata : {
     *(.piggydata)
@@ -123,7 +125,7 @@ SECTIONS
 
   . = BSS_START;
   __bss_start = .;
-  .bss			: { *(.bss) }
+  .bss			: { *(.bss .bss.*) }
   _end = .;
 
   . = ALIGN(8);		/* the stack must be 64-bit aligned */
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 7e0934180724..efe38eb25301 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1,1500 +1,41 @@
 # SPDX-License-Identifier: GPL-2.0
-dtb-$(CONFIG_ARCH_ALPINE) += \
-	alpine-db.dtb
-dtb-$(CONFIG_MACH_ARTPEC6) += \
-	artpec6-devboard.dtb
-dtb-$(CONFIG_MACH_ASM9260) += \
-	alphascale-asm9260-devkit.dtb
-# Keep at91 dtb files sorted alphabetically for each SoC
-dtb-$(CONFIG_SOC_AT91RM9200) += \
-	at91rm9200ek.dtb \
-	mpa1600.dtb
-dtb-$(CONFIG_SOC_AT91SAM9) += \
-	animeo_ip.dtb \
-	at91-qil_a9260.dtb \
-	aks-cdu.dtb \
-	ethernut5.dtb \
-	evk-pro3.dtb \
-	tny_a9260.dtb \
-	usb_a9260.dtb \
-	at91sam9260ek.dtb \
-	at91sam9261ek.dtb \
-	at91sam9263ek.dtb \
-	at91-sam9_l9260.dtb \
-	tny_a9263.dtb \
-	usb_a9263.dtb \
-	at91-foxg20.dtb \
-	at91-kizbox.dtb \
-	at91sam9g20ek.dtb \
-	at91sam9g20ek_2mmc.dtb \
-	tny_a9g20.dtb \
-	usb_a9g20.dtb \
-	usb_a9g20_lpw.dtb \
-	at91sam9m10g45ek.dtb \
-	pm9g45.dtb \
-	at91sam9n12ek.dtb \
-	at91sam9rlek.dtb \
-	at91-ariag25.dtb \
-	at91-ariettag25.dtb \
-	at91-cosino_mega2560.dtb \
-	at91-kizboxmini-base.dtb \
-	at91-kizboxmini-mb.dtb \
-	at91-kizboxmini-rd.dtb \
-	at91-smartkiz.dtb \
-	at91-wb45n.dtb \
-	at91sam9g15ek.dtb \
-	at91sam9g25-gardena-smart-gateway.dtb \
-	at91sam9g25ek.dtb \
-	at91sam9g35ek.dtb \
-	at91sam9x25ek.dtb \
-	at91sam9x35ek.dtb
-dtb-$(CONFIG_SOC_SAM9X60) += \
-	at91-sam9x60ek.dtb
-dtb-$(CONFIG_SOC_SAM_V7) += \
-	at91-kizbox2-2.dtb \
-	at91-kizbox3-hs.dtb \
-	at91-nattis-2-natte-2.dtb \
-	at91-sama5d27_som1_ek.dtb \
-	at91-sama5d27_wlsom1_ek.dtb \
-	at91-sama5d2_icp.dtb \
-	at91-sama5d2_ptc_ek.dtb \
-	at91-sama5d2_xplained.dtb \
-	at91-sama5d3_xplained.dtb \
-	at91-dvk_som60.dtb \
-	at91-gatwick.dtb \
-	at91-tse850-3.dtb \
-	at91-wb50n.dtb \
-	sama5d31ek.dtb \
-	sama5d33ek.dtb \
-	sama5d34ek.dtb \
-	sama5d35ek.dtb \
-	sama5d36ek.dtb \
-	sama5d36ek_cmp.dtb \
-	at91-sama5d4_ma5d4evk.dtb \
-	at91-sama5d4_xplained.dtb \
-	at91-sama5d4ek.dtb \
-	at91-vinco.dtb
-dtb-$(CONFIG_SOC_SAMA7G5) += \
-	at91-sama7g5ek.dtb
-dtb-$(CONFIG_ARCH_AXXIA) += \
-	axm5516-amarillo.dtb
-dtb-$(CONFIG_ARCH_BCM2835) += \
-	bcm2835-rpi-b.dtb \
-	bcm2835-rpi-a.dtb \
-	bcm2835-rpi-b-rev2.dtb \
-	bcm2835-rpi-b-plus.dtb \
-	bcm2835-rpi-a-plus.dtb \
-	bcm2835-rpi-cm1-io1.dtb \
-	bcm2836-rpi-2-b.dtb \
-	bcm2837-rpi-3-a-plus.dtb \
-	bcm2837-rpi-3-b.dtb \
-	bcm2837-rpi-3-b-plus.dtb \
-	bcm2837-rpi-cm3-io3.dtb \
-	bcm2711-rpi-400.dtb \
-	bcm2711-rpi-4-b.dtb \
-	bcm2835-rpi-zero.dtb \
-	bcm2835-rpi-zero-w.dtb
-dtb-$(CONFIG_ARCH_BCM_5301X) += \
-	bcm4708-asus-rt-ac56u.dtb \
-	bcm4708-asus-rt-ac68u.dtb \
-	bcm4708-buffalo-wzr-1750dhp.dtb \
-	bcm4708-linksys-ea6300-v1.dtb \
-	bcm4708-linksys-ea6500-v2.dtb \
-	bcm4708-luxul-xap-1510.dtb \
-	bcm4708-luxul-xwc-1000.dtb \
-	bcm4708-netgear-r6250.dtb \
-	bcm4708-netgear-r6300-v2.dtb \
-	bcm4708-smartrg-sr400ac.dtb \
-	bcm47081-asus-rt-n18u.dtb \
-	bcm47081-buffalo-wzr-600dhp2.dtb \
-	bcm47081-buffalo-wzr-900dhp.dtb \
-	bcm47081-luxul-xap-1410.dtb \
-	bcm47081-luxul-xwr-1200.dtb \
-	bcm47081-tplink-archer-c5-v2.dtb \
-	bcm4709-asus-rt-ac87u.dtb \
-	bcm4709-buffalo-wxr-1900dhp.dtb \
-	bcm4709-linksys-ea9200.dtb \
-	bcm4709-netgear-r7000.dtb \
-	bcm4709-netgear-r8000.dtb \
-	bcm4709-tplink-archer-c9-v1.dtb \
-	bcm47094-dlink-dir-885l.dtb \
-	bcm47094-linksys-panamera.dtb \
-	bcm47094-luxul-abr-4500.dtb \
-	bcm47094-luxul-xap-1610.dtb \
-	bcm47094-luxul-xbr-4500.dtb \
-	bcm47094-luxul-xwc-2000.dtb \
-	bcm47094-luxul-xwr-3100.dtb \
-	bcm47094-luxul-xwr-3150-v1.dtb \
-	bcm47094-netgear-r8500.dtb \
-	bcm47094-phicomm-k3.dtb \
-	bcm53016-meraki-mr32.dtb \
-	bcm94708.dtb \
-	bcm94709.dtb \
-	bcm953012er.dtb \
-	bcm953012hr.dtb \
-	bcm953012k.dtb
-dtb-$(CONFIG_ARCH_BCM_53573) += \
-	bcm47189-luxul-xap-1440.dtb \
-	bcm47189-luxul-xap-810.dtb \
-	bcm47189-tenda-ac9.dtb \
-	bcm947189acdbmr.dtb
-dtb-$(CONFIG_ARCH_BCM_63XX) += \
-	bcm963138dvt.dtb
-dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
-	bcm911360_entphn.dtb \
-	bcm911360k.dtb \
-	bcm958300k.dtb \
-	bcm958305k.dtb
-dtb-$(CONFIG_ARCH_BCM_HR2) += \
-	bcm53340-ubnt-unifi-switch8.dtb
-dtb-$(CONFIG_ARCH_BCM_MOBILE) += \
-	bcm28155-ap.dtb \
-	bcm21664-garnet.dtb \
-	bcm23550-sparrow.dtb
-dtb-$(CONFIG_ARCH_BCM_NSP) += \
-	bcm958522er.dtb \
-	bcm958525er.dtb \
-	bcm958525xmc.dtb \
-	bcm958622hr.dtb \
-	bcm958623hr.dtb \
-	bcm958625hr.dtb \
-	bcm988312hr.dtb \
-	bcm958625k.dtb
-dtb-$(CONFIG_ARCH_BERLIN) += \
-	berlin2-sony-nsz-gs7.dtb \
-	berlin2cd-google-chromecast.dtb \
-	berlin2cd-valve-steamlink.dtb \
-	berlin2q-marvell-dmp.dtb
-dtb-$(CONFIG_ARCH_BRCMSTB) += \
-	bcm7445-bcm97445svmb.dtb
-dtb-$(CONFIG_ARCH_CLPS711X) += \
-	ep7211-edb7211.dtb
-dtb-$(CONFIG_ARCH_DAVINCI) += \
-	da850-lcdk.dtb \
-	da850-enbw-cmc.dtb \
-	da850-evm.dtb \
-	da850-lego-ev3.dtb
-dtb-$(CONFIG_ARCH_DIGICOLOR) += \
-	cx92755_equinox.dtb
-dtb-$(CONFIG_ARCH_EXYNOS3) += \
-	exynos3250-artik5-eval.dtb \
-	exynos3250-monk.dtb \
-	exynos3250-rinato.dtb
-dtb-$(CONFIG_ARCH_EXYNOS4) += \
-	exynos4210-i9100.dtb \
-	exynos4210-origen.dtb \
-	exynos4210-smdkv310.dtb \
-	exynos4210-trats.dtb \
-	exynos4210-universal_c210.dtb \
-	exynos4412-i9300.dtb \
-	exynos4412-i9305.dtb \
-	exynos4412-itop-elite.dtb \
-	exynos4412-n710x.dtb \
-	exynos4412-odroidu3.dtb \
-	exynos4412-odroidx.dtb \
-	exynos4412-odroidx2.dtb \
-	exynos4412-origen.dtb \
-	exynos4412-p4note-n8010.dtb \
-	exynos4412-smdk4412.dtb \
-	exynos4412-tiny4412.dtb \
-	exynos4412-trats2.dtb
-dtb-$(CONFIG_ARCH_EXYNOS5) += \
-	exynos5250-arndale.dtb \
-	exynos5250-smdk5250.dtb \
-	exynos5250-snow.dtb \
-	exynos5250-snow-rev5.dtb \
-	exynos5250-spring.dtb \
-	exynos5260-xyref5260.dtb \
-	exynos5410-odroidxu.dtb \
-	exynos5410-smdk5410.dtb \
-	exynos5420-arndale-octa.dtb \
-	exynos5420-peach-pit.dtb \
-	exynos5420-smdk5420.dtb \
-	exynos5422-odroidhc1.dtb \
-	exynos5422-odroidxu3.dtb \
-	exynos5422-odroidxu3-lite.dtb \
-	exynos5422-odroidxu4.dtb \
-	exynos5800-peach-pi.dtb
-dtb-$(CONFIG_ARCH_GEMINI) += \
-	gemini-dlink-dir-685.dtb \
-	gemini-dlink-dns-313.dtb \
-	gemini-nas4220b.dtb \
-	gemini-rut1xx.dtb \
-	gemini-sl93512r.dtb \
-	gemini-sq201.dtb \
-	gemini-wbd111.dtb \
-	gemini-wbd222.dtb
-dtb-$(CONFIG_ARCH_HI3xxx) += \
-	hi3620-hi4511.dtb
-dtb-$(CONFIG_ARCH_HIGHBANK) += \
-	highbank.dtb \
-	ecx-2000.dtb
-dtb-$(CONFIG_ARCH_HIP01) += \
-	hip01-ca9x2.dtb
-dtb-$(CONFIG_ARCH_HIP04) += \
-	hip04-d01.dtb
-dtb-$(CONFIG_ARCH_HISI) += \
-	hi3519-demb.dtb
-dtb-$(CONFIG_ARCH_HIX5HD2) += \
-	hisi-x5hd2-dkb.dtb
-dtb-$(CONFIG_ARCH_INTEGRATOR) += \
-	integratorap.dtb \
-	integratorap-im-pd1.dtb \
-	integratorcp.dtb
-dtb-$(CONFIG_ARCH_IXP4XX) += \
-	intel-ixp42x-linksys-nslu2.dtb \
-	intel-ixp42x-linksys-wrv54g.dtb \
-	intel-ixp42x-freecom-fsg-3.dtb \
-	intel-ixp42x-welltech-epbx100.dtb \
-	intel-ixp42x-ixdp425.dtb \
-	intel-ixp43x-kixrp435.dtb \
-	intel-ixp46x-ixdp465.dtb \
-	intel-ixp42x-adi-coyote.dtb \
-	intel-ixp42x-ixdpg425.dtb \
-	intel-ixp42x-iomega-nas100d.dtb \
-	intel-ixp42x-dlink-dsm-g600.dtb \
-	intel-ixp42x-gateworks-gw2348.dtb \
-	intel-ixp43x-gateworks-gw2358.dtb \
-	intel-ixp42x-netgear-wg302v2.dtb \
-	intel-ixp42x-arcom-vulcan.dtb
-dtb-$(CONFIG_ARCH_KEYSTONE) += \
-	keystone-k2hk-evm.dtb \
-	keystone-k2l-evm.dtb \
-	keystone-k2e-evm.dtb \
-	keystone-k2g-evm.dtb \
-	keystone-k2g-ice.dtb
-dtb-$(CONFIG_MACH_KIRKWOOD) += \
-	kirkwood-b3.dtb \
-	kirkwood-blackarmor-nas220.dtb \
-	kirkwood-cloudbox.dtb \
-	kirkwood-d2net.dtb \
-	kirkwood-db-88f6281.dtb \
-	kirkwood-db-88f6282.dtb \
-	kirkwood-dir665.dtb \
-	kirkwood-dns320.dtb \
-	kirkwood-dns325.dtb \
-	kirkwood-dockstar.dtb \
-	kirkwood-dreamplug.dtb \
-	kirkwood-ds109.dtb \
-	kirkwood-ds110jv10.dtb \
-	kirkwood-ds111.dtb \
-	kirkwood-ds112.dtb \
-	kirkwood-ds209.dtb \
-	kirkwood-ds210.dtb \
-	kirkwood-ds212.dtb \
-	kirkwood-ds212j.dtb \
-	kirkwood-ds409.dtb \
-	kirkwood-ds409slim.dtb \
-	kirkwood-ds411.dtb \
-	kirkwood-ds411j.dtb \
-	kirkwood-ds411slim.dtb \
-	kirkwood-goflexnet.dtb \
-	kirkwood-guruplug-server-plus.dtb \
-	kirkwood-ib62x0.dtb \
-	kirkwood-iconnect.dtb \
-	kirkwood-iomega_ix2_200.dtb \
-	kirkwood-is2.dtb \
-	kirkwood-km_kirkwood.dtb \
-	kirkwood-l-50.dtb \
-	kirkwood-laplug.dtb \
-	kirkwood-linkstation-lsqvl.dtb \
-	kirkwood-linkstation-lsvl.dtb \
-	kirkwood-linkstation-lswsxl.dtb \
-	kirkwood-linkstation-lswvl.dtb \
-	kirkwood-linkstation-lswxl.dtb \
-	kirkwood-linksys-viper.dtb \
-	kirkwood-lschlv2.dtb \
-	kirkwood-lsxhl.dtb \
-	kirkwood-mplcec4.dtb \
-	kirkwood-mv88f6281gtw-ge.dtb \
-	kirkwood-nas2big.dtb \
-	kirkwood-net2big.dtb \
-	kirkwood-net5big.dtb \
-	kirkwood-netgear_readynas_duo_v2.dtb \
-	kirkwood-netgear_readynas_nv+_v2.dtb \
-	kirkwood-ns2.dtb \
-	kirkwood-ns2lite.dtb \
-	kirkwood-ns2max.dtb \
-	kirkwood-ns2mini.dtb \
-	kirkwood-nsa310.dtb \
-	kirkwood-nsa310a.dtb \
-	kirkwood-nsa320.dtb \
-	kirkwood-nsa325.dtb \
-	kirkwood-openblocks_a6.dtb \
-	kirkwood-openblocks_a7.dtb \
-	kirkwood-openrd-base.dtb \
-	kirkwood-openrd-client.dtb \
-	kirkwood-openrd-ultimate.dtb \
-	kirkwood-pogo_e02.dtb \
-	kirkwood-pogoplug-series-4.dtb \
-	kirkwood-rd88f6192.dtb \
-	kirkwood-rd88f6281-z0.dtb \
-	kirkwood-rd88f6281-a.dtb \
-	kirkwood-rs212.dtb \
-	kirkwood-rs409.dtb \
-	kirkwood-rs411.dtb \
-	kirkwood-sheevaplug.dtb \
-	kirkwood-sheevaplug-esata.dtb \
-	kirkwood-t5325.dtb \
-	kirkwood-topkick.dtb \
-	kirkwood-ts219-6281.dtb \
-	kirkwood-ts219-6282.dtb \
-	kirkwood-ts419-6281.dtb \
-	kirkwood-ts419-6282.dtb
-dtb-$(CONFIG_ARCH_LPC18XX) += \
-	lpc4337-ciaa.dtb \
-	lpc4350-hitex-eval.dtb \
-	lpc4357-ea4357-devkit.dtb \
-	lpc4357-myd-lpc4357.dtb
-dtb-$(CONFIG_ARCH_LPC32XX) += \
-	lpc3250-ea3250.dtb \
-	lpc3250-phy3250.dtb
-dtb-$(CONFIG_ARCH_WPCM450) += \
-	nuvoton-wpcm450-supermicro-x9sci-ln4f.dtb
-dtb-$(CONFIG_ARCH_NPCM7XX) += \
-	nuvoton-npcm730-gsj.dtb \
-	nuvoton-npcm730-gbs.dtb \
-	nuvoton-npcm730-kudo.dtb \
-	nuvoton-npcm750-evb.dtb \
-	nuvoton-npcm750-runbmc-olympus.dtb
-dtb-$(CONFIG_MACH_MESON6) += \
-	meson6-atv1200.dtb
-dtb-$(CONFIG_MACH_MESON8) += \
-	meson8-minix-neo-x8.dtb \
-	meson8b-ec100.dtb \
-	meson8b-mxq.dtb \
-	meson8b-odroidc1.dtb \
-	meson8m2-mxiii-plus.dtb
-dtb-$(CONFIG_ARCH_MMP) += \
-	pxa168-aspenite.dtb \
-	pxa910-dkb.dtb \
-	mmp2-brownstone.dtb \
-	mmp2-olpc-xo-1-75.dtb \
-	mmp3-dell-ariel.dtb
-dtb-$(CONFIG_ARCH_MPS2) += \
-	mps2-an385.dtb \
-	mps2-an399.dtb
-dtb-$(CONFIG_ARCH_MOXART) += \
-	moxart-uc7112lx.dtb
-dtb-$(CONFIG_ARCH_SD5203) += \
-	sd5203.dtb
-dtb-$(CONFIG_SOC_IMX1) += \
-	imx1-ads.dtb \
-	imx1-apf9328.dtb
-dtb-$(CONFIG_SOC_IMX25) += \
-	imx25-eukrea-mbimxsd25-baseboard.dtb \
-	imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dtb \
-	imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dtb \
-	imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dtb \
-	imx25-karo-tx25.dtb \
-	imx25-pdk.dtb
-dtb-$(CONFIG_SOC_IMX27) += \
-	imx27-apf27.dtb \
-	imx27-apf27dev.dtb \
-	imx27-eukrea-mbimxsd27-baseboard.dtb \
-	imx27-pdk.dtb \
-	imx27-phytec-phycore-rdk.dtb \
-	imx27-phytec-phycard-s-rdk.dtb
-dtb-$(CONFIG_SOC_IMX31) += \
-	imx31-bug.dtb \
-	imx31-lite.dtb
-dtb-$(CONFIG_SOC_IMX35) += \
-	imx35-eukrea-mbimxsd35-baseboard.dtb \
-	imx35-pdk.dtb
-dtb-$(CONFIG_SOC_IMX50) += \
-	imx50-evk.dtb \
-	imx50-kobo-aura.dtb
-dtb-$(CONFIG_SOC_IMX51) += \
-	imx51-apf51.dtb \
-	imx51-apf51dev.dtb \
-	imx51-babbage.dtb \
-	imx51-digi-connectcore-jsk.dtb \
-	imx51-eukrea-mbimxsd51-baseboard.dtb \
-	imx51-ts4800.dtb \
-	imx51-zii-rdu1.dtb \
-	imx51-zii-scu2-mezz.dtb \
-	imx51-zii-scu3-esb.dtb
-dtb-$(CONFIG_SOC_IMX53) += \
-	imx53-ard.dtb \
-	imx53-cx9020.dtb \
-	imx53-kp-ddc.dtb \
-	imx53-kp-hsc.dtb \
-	imx53-m53evk.dtb \
-	imx53-m53menlo.dtb \
-	imx53-mba53.dtb \
-	imx53-ppd.dtb \
-	imx53-qsb.dtb \
-	imx53-qsrb.dtb \
-	imx53-smd.dtb \
-	imx53-tx53-x03x.dtb \
-	imx53-tx53-x13x.dtb \
-	imx53-usbarmory.dtb \
-	imx53-voipac-bsb.dtb
-dtb-$(CONFIG_SOC_IMX6Q) += \
-	imx6dl-alti6p.dtb \
-	imx6dl-apf6dev.dtb \
-	imx6dl-aristainetos_4.dtb \
-	imx6dl-aristainetos_7.dtb \
-	imx6dl-aristainetos2_4.dtb \
-	imx6dl-aristainetos2_7.dtb \
-	imx6dl-colibri-eval-v3.dtb \
-	imx6dl-colibri-v1_1-eval-v3.dtb \
-	imx6dl-cubox-i.dtb \
-	imx6dl-cubox-i-emmc-som-v15.dtb \
-	imx6dl-cubox-i-som-v15.dtb \
-	imx6dl-dfi-fs700-m60.dtb \
-	imx6dl-dhcom-picoitx.dtb \
-	imx6dl-eckelmann-ci4x10.dtb \
-	imx6dl-emcon-avari.dtb \
-	imx6dl-gw51xx.dtb \
-	imx6dl-gw52xx.dtb \
-	imx6dl-gw53xx.dtb \
-	imx6dl-gw54xx.dtb \
-	imx6dl-gw551x.dtb \
-	imx6dl-gw552x.dtb \
-	imx6dl-gw553x.dtb \
-	imx6dl-gw560x.dtb \
-	imx6dl-gw5903.dtb \
-	imx6dl-gw5904.dtb \
-	imx6dl-gw5907.dtb \
-	imx6dl-gw5910.dtb \
-	imx6dl-gw5912.dtb \
-	imx6dl-gw5913.dtb \
-	imx6dl-hummingboard.dtb \
-	imx6dl-hummingboard-emmc-som-v15.dtb \
-	imx6dl-hummingboard-som-v15.dtb \
-	imx6dl-hummingboard2.dtb \
-	imx6dl-hummingboard2-emmc-som-v15.dtb \
-	imx6dl-hummingboard2-som-v15.dtb \
-	imx6dl-icore.dtb \
-	imx6dl-icore-mipi.dtb \
-	imx6dl-icore-rqs.dtb \
-	imx6dl-lanmcu.dtb \
-	imx6dl-mamoj.dtb \
-	imx6dl-nit6xlite.dtb \
-	imx6dl-nitrogen6x.dtb \
-	imx6dl-phytec-mira-rdk-nand.dtb \
-	imx6dl-phytec-pbab01.dtb \
-	imx6dl-pico-dwarf.dtb \
-	imx6dl-pico-hobbit.dtb \
-	imx6dl-pico-nymph.dtb \
-	imx6dl-pico-pi.dtb \
-	imx6dl-plybas.dtb \
-	imx6dl-plym2m.dtb \
-	imx6dl-prtmvt.dtb \
-	imx6dl-prtrvt.dtb \
-	imx6dl-prtvt7.dtb \
-	imx6dl-rex-basic.dtb \
-	imx6dl-riotboard.dtb \
-	imx6dl-sabreauto.dtb \
-	imx6dl-sabrelite.dtb \
-	imx6dl-sabresd.dtb \
-	imx6dl-savageboard.dtb \
-	imx6dl-skov-revc-lt2.dtb \
-	imx6dl-skov-revc-lt6.dtb \
-	imx6dl-solidsense.dtb \
-	imx6dl-ts4900.dtb \
-	imx6dl-ts7970.dtb \
-	imx6dl-tx6dl-comtft.dtb \
-	imx6dl-tx6s-8034.dtb \
-	imx6dl-tx6s-8034-mb7.dtb \
-	imx6dl-tx6s-8035.dtb \
-	imx6dl-tx6s-8035-mb7.dtb \
-	imx6dl-tx6u-801x.dtb \
-	imx6dl-tx6u-80xx-mb7.dtb \
-	imx6dl-tx6u-8033.dtb \
-	imx6dl-tx6u-8033-mb7.dtb \
-	imx6dl-tx6u-811x.dtb \
-	imx6dl-tx6u-81xx-mb7.dtb \
-	imx6dl-udoo.dtb \
-	imx6dl-victgo.dtb \
-	imx6dl-vicut1.dtb \
-	imx6dl-wandboard.dtb \
-	imx6dl-wandboard-revb1.dtb \
-	imx6dl-wandboard-revd1.dtb \
-	imx6dl-yapp4-draco.dtb \
-	imx6dl-yapp4-hydra.dtb \
-	imx6dl-yapp4-orion.dtb \
-	imx6dl-yapp4-ursa.dtb \
-	imx6q-apalis-eval.dtb \
-	imx6q-apalis-ixora.dtb \
-	imx6q-apalis-ixora-v1.1.dtb \
-	imx6q-apf6dev.dtb \
-	imx6q-arm2.dtb \
-	imx6q-b450v3.dtb \
-	imx6q-b650v3.dtb \
-	imx6q-b850v3.dtb \
-	imx6q-cm-fx6.dtb \
-	imx6q-cubox-i.dtb \
-	imx6q-cubox-i-emmc-som-v15.dtb \
-	imx6q-cubox-i-som-v15.dtb \
-	imx6q-dfi-fs700-m60.dtb \
-	imx6q-dhcom-pdk2.dtb \
-	imx6q-display5-tianma-tm070-1280x768.dtb \
-	imx6q-dmo-edmqmx6.dtb \
-	imx6q-dms-ba16.dtb \
-	imx6q-ds.dtb \
-	imx6q-emcon-avari.dtb \
-	imx6q-evi.dtb \
-	imx6dl-b105pv2.dtb \
-	imx6dl-b105v2.dtb \
-	imx6dl-b125v2.dtb \
-	imx6dl-b125pv2.dtb \
-	imx6dl-b155v2.dtb \
-	imx6q-gk802.dtb \
-	imx6q-gw51xx.dtb \
-	imx6q-gw52xx.dtb \
-	imx6q-gw53xx.dtb \
-	imx6q-gw5400-a.dtb \
-	imx6q-gw54xx.dtb \
-	imx6q-gw551x.dtb \
-	imx6q-gw552x.dtb \
-	imx6q-gw553x.dtb \
-	imx6q-gw560x.dtb \
-	imx6q-gw5903.dtb \
-	imx6q-gw5904.dtb \
-	imx6q-gw5907.dtb \
-	imx6q-gw5910.dtb \
-	imx6q-gw5912.dtb \
-	imx6q-gw5913.dtb \
-	imx6q-h100.dtb \
-	imx6q-hummingboard.dtb \
-	imx6q-hummingboard-emmc-som-v15.dtb \
-	imx6q-hummingboard-som-v15.dtb \
-	imx6q-hummingboard2.dtb \
-	imx6q-hummingboard2-emmc-som-v15.dtb \
-	imx6q-hummingboard2-som-v15.dtb \
-	imx6q-icore.dtb \
-	imx6q-icore-mipi.dtb \
-	imx6q-icore-ofcap10.dtb \
-	imx6q-icore-ofcap12.dtb \
-	imx6q-icore-rqs.dtb \
-	imx6q-kp-tpc.dtb \
-	imx6q-logicpd.dtb \
-	imx6q-marsboard.dtb \
-	imx6q-mccmon6.dtb \
-	imx6q-nitrogen6x.dtb \
-	imx6q-nitrogen6_max.dtb \
-	imx6q-nitrogen6_som2.dtb \
-	imx6q-novena.dtb \
-	imx6q-phytec-mira-rdk-emmc.dtb \
-	imx6q-phytec-mira-rdk-nand.dtb \
-	imx6q-phytec-pbab01.dtb \
-	imx6q-pico-dwarf.dtb \
-	imx6q-pico-hobbit.dtb \
-	imx6q-pico-nymph.dtb \
-	imx6q-pico-pi.dtb \
-	imx6q-pistachio.dtb \
-	imx6q-prti6q.dtb \
-	imx6q-prtwd2.dtb \
-	imx6q-rex-pro.dtb \
-	imx6q-sabreauto.dtb \
-	imx6q-sabrelite.dtb \
-	imx6q-sabresd.dtb \
-	imx6q-savageboard.dtb \
-	imx6q-sbc6x.dtb \
-	imx6q-skov-revc-lt2.dtb \
-	imx6q-skov-revc-lt6.dtb \
-	imx6q-skov-reve-mi1010ait-1cp1.dtb \
-	imx6q-solidsense.dtb \
-	imx6q-tbs2910.dtb \
-	imx6q-ts4900.dtb \
-	imx6q-ts7970.dtb \
-	imx6q-tx6q-1010.dtb \
-	imx6q-tx6q-1010-comtft.dtb \
-	imx6q-tx6q-1020.dtb \
-	imx6q-tx6q-1020-comtft.dtb \
-	imx6q-tx6q-1036.dtb \
-	imx6q-tx6q-1036-mb7.dtb \
-	imx6q-tx6q-10x0-mb7.dtb \
-	imx6q-tx6q-1110.dtb \
-	imx6q-tx6q-11x0-mb7.dtb \
-	imx6q-udoo.dtb \
-	imx6q-utilite-pro.dtb \
-	imx6q-var-dt6customboard.dtb \
-	imx6q-vicut1.dtb \
-	imx6q-wandboard.dtb \
-	imx6q-wandboard-revb1.dtb \
-	imx6q-wandboard-revd1.dtb \
-	imx6q-zii-rdu2.dtb \
-	imx6qp-nitrogen6_max.dtb \
-	imx6qp-nitrogen6_som2.dtb \
-	imx6qp-phytec-mira-rdk-nand.dtb \
-	imx6qp-prtwd3.dtb \
-	imx6qp-sabreauto.dtb \
-	imx6qp-sabresd.dtb \
-	imx6qp-tx6qp-8037.dtb \
-	imx6qp-tx6qp-8037-mb7.dtb \
-	imx6qp-tx6qp-8137.dtb \
-	imx6qp-tx6qp-8137-mb7.dtb \
-	imx6qp-vicutp.dtb \
-	imx6qp-wandboard-revd1.dtb \
-	imx6qp-zii-rdu2.dtb \
-	imx6s-dhcom-drc02.dtb
-dtb-$(CONFIG_SOC_IMX6SL) += \
-	imx6sl-evk.dtb \
-	imx6sl-tolino-shine2hd.dtb \
-	imx6sl-tolino-shine3.dtb \
-	imx6sl-warp.dtb
-dtb-$(CONFIG_SOC_IMX6SLL) += \
-	imx6sll-evk.dtb \
-	imx6sll-kobo-clarahd.dtb
-dtb-$(CONFIG_SOC_IMX6SX) += \
-	imx6sx-nitrogen6sx.dtb \
-	imx6sx-sabreauto.dtb \
-	imx6sx-sdb-reva.dtb \
-	imx6sx-sdb-sai.dtb \
-	imx6sx-sdb.dtb \
-	imx6sx-sdb-mqs.dtb \
-	imx6sx-softing-vining-2000.dtb \
-	imx6sx-udoo-neo-basic.dtb \
-	imx6sx-udoo-neo-extended.dtb \
-	imx6sx-udoo-neo-full.dtb
-dtb-$(CONFIG_SOC_IMX6UL) += \
-	imx6ul-14x14-evk.dtb \
-	imx6ul-ccimx6ulsbcexpress.dtb \
-	imx6ul-ccimx6ulsbcpro.dtb \
-	imx6ul-geam.dtb \
-	imx6ul-isiot-emmc.dtb \
-	imx6ul-isiot-nand.dtb \
-	imx6ul-kontron-n6310-s.dtb \
-	imx6ul-kontron-n6310-s-43.dtb \
-	imx6ul-liteboard.dtb \
-	imx6ul-opos6uldev.dtb \
-	imx6ul-pico-dwarf.dtb \
-	imx6ul-pico-hobbit.dtb \
-	imx6ul-pico-pi.dtb \
-	imx6ul-phytec-segin-ff-rdk-emmc.dtb \
-	imx6ul-phytec-segin-ff-rdk-nand.dtb \
-	imx6ul-prti6g.dtb \
-	imx6ul-tx6ul-0010.dtb \
-	imx6ul-tx6ul-0011.dtb \
-	imx6ul-tx6ul-mainboard.dtb \
-	imx6ull-14x14-evk.dtb \
-	imx6ull-colibri-eval-v3.dtb \
-	imx6ull-colibri-wifi-eval-v3.dtb \
-	imx6ull-myir-mys-6ulx-eval.dtb \
-	imx6ull-opos6uldev.dtb \
-	imx6ull-phytec-segin-ff-rdk-nand.dtb \
-	imx6ull-phytec-segin-ff-rdk-emmc.dtb \
-	imx6ull-phytec-segin-lc-rdk-nand.dtb \
-	imx6ulz-14x14-evk.dtb
-dtb-$(CONFIG_SOC_IMX7D) += \
-	imx7d-cl-som-imx7.dtb \
-	imx7d-colibri-aster.dtb \
-	imx7d-colibri-emmc-aster.dtb \
-	imx7d-colibri-emmc-eval-v3.dtb \
-	imx7d-colibri-eval-v3.dtb \
-	imx7d-flex-concentrator.dtb \
-	imx7d-flex-concentrator-mfg.dtb \
-	imx7d-mba7.dtb \
-	imx7d-meerkat96.dtb \
-	imx7d-nitrogen7.dtb \
-	imx7d-pico-dwarf.dtb \
-	imx7d-pico-hobbit.dtb \
-	imx7d-pico-nymph.dtb \
-	imx7d-pico-pi.dtb \
-	imx7d-remarkable2.dtb \
-	imx7d-sbc-imx7.dtb \
-	imx7d-sdb.dtb \
-	imx7d-sdb-reva.dtb \
-	imx7d-sdb-sht11.dtb \
-	imx7d-zii-rmu2.dtb \
-	imx7d-zii-rpu2.dtb \
-	imx7s-colibri-aster.dtb \
-	imx7s-colibri-eval-v3.dtb \
-	imx7s-mba7.dtb \
-	imx7s-warp.dtb
-dtb-$(CONFIG_SOC_IMX7ULP) += \
-	imx7ulp-com.dtb \
-	imx7ulp-evk.dtb
-dtb-$(CONFIG_SOC_LS1021A) += \
-	ls1021a-moxa-uc-8410a.dtb \
-	ls1021a-qds.dtb \
-	ls1021a-tsn.dtb \
-	ls1021a-twr.dtb
-dtb-$(CONFIG_SOC_VF610) += \
-	vf500-colibri-eval-v3.dtb \
-	vf610-bk4.dtb \
-	vf610-colibri-eval-v3.dtb \
-	vf610m4-colibri.dtb \
-	vf610-cosmic.dtb \
-	vf610m4-cosmic.dtb \
-	vf610-twr.dtb \
-	vf610-zii-cfu1.dtb \
-	vf610-zii-dev-rev-b.dtb \
-	vf610-zii-dev-rev-c.dtb \
-	vf610-zii-scu4-aib.dtb \
-	vf610-zii-spb4.dtb \
-	vf610-zii-ssmb-dtu.dtb \
-	vf610-zii-ssmb-spu3.dtb
-dtb-$(CONFIG_ARCH_MXS) += \
-	imx23-evk.dtb \
-	imx23-olinuxino.dtb \
-	imx23-sansa.dtb \
-	imx23-stmp378x_devb.dtb \
-	imx23-xfi3.dtb \
-	imx28-apf28.dtb \
-	imx28-apf28dev.dtb \
-	imx28-apx4devkit.dtb \
-	imx28-cfa10036.dtb \
-	imx28-cfa10037.dtb \
-	imx28-cfa10049.dtb \
-	imx28-cfa10055.dtb \
-	imx28-cfa10056.dtb \
-	imx28-cfa10057.dtb \
-	imx28-cfa10058.dtb \
-	imx28-duckbill-2-485.dtb \
-	imx28-duckbill-2.dtb \
-	imx28-duckbill-2-enocean.dtb \
-	imx28-duckbill-2-spi.dtb \
-	imx28-duckbill.dtb \
-	imx28-eukrea-mbmx283lc.dtb \
-	imx28-eukrea-mbmx287lc.dtb \
-	imx28-evk.dtb \
-	imx28-m28cu3.dtb \
-	imx28-m28evk.dtb \
-	imx28-sps1.dtb \
-	imx28-ts4600.dtb \
-	imx28-tx28.dtb \
-	imx28-xea.dtb
-dtb-$(CONFIG_ARCH_NOMADIK) += \
-	ste-nomadik-s8815.dtb \
-	ste-nomadik-nhk15.dtb
-dtb-$(CONFIG_ARCH_NSPIRE) += \
-	nspire-cx.dtb \
-	nspire-tp.dtb \
-	nspire-clp.dtb
-dtb-$(CONFIG_ARCH_OMAP2) += \
-	omap2420-h4.dtb \
-	omap2420-n800.dtb \
-	omap2420-n810.dtb \
-	omap2420-n810-wimax.dtb \
-	omap2430-sdp.dtb
-dtb-$(CONFIG_ARCH_OMAP3) += \
-	am3517-craneboard.dtb \
-	am3517-evm.dtb \
-	am3517_mt_ventoux.dtb \
-	logicpd-torpedo-37xx-devkit.dtb \
-	logicpd-som-lv-37xx-devkit.dtb \
-	omap3430-sdp.dtb \
-	omap3-beagle.dtb \
-	omap3-beagle-xm.dtb \
-	omap3-beagle-xm-ab.dtb \
-	omap3-cm-t3517.dtb \
-	omap3-cm-t3530.dtb \
-	omap3-cm-t3730.dtb \
-	omap3-devkit8000.dtb \
-	omap3-devkit8000-lcd43.dtb \
-	omap3-devkit8000-lcd70.dtb \
-	omap3-echo.dtb \
-	omap3-evm.dtb \
-	omap3-evm-37xx.dtb \
-	omap3-gta04a3.dtb \
-	omap3-gta04a4.dtb \
-	omap3-gta04a5.dtb \
-	omap3-gta04a5one.dtb \
-	omap3-ha.dtb \
-	omap3-ha-lcd.dtb \
-	omap3-igep0020.dtb \
-	omap3-igep0020-rev-f.dtb \
-	omap3-igep0030.dtb \
-	omap3-igep0030-rev-g.dtb \
-	omap3-ldp.dtb \
-	omap3-lilly-dbb056.dtb \
-	omap3-n900.dtb \
-	omap3-n9.dtb \
-	omap3-n950.dtb \
-	omap3-overo-alto35.dtb \
-	omap3-overo-chestnut43.dtb \
-	omap3-overo-gallop43.dtb \
-	omap3-overo-palo35.dtb \
-	omap3-overo-palo43.dtb \
-	omap3-overo-storm-alto35.dtb \
-	omap3-overo-storm-chestnut43.dtb \
-	omap3-overo-storm-gallop43.dtb \
-	omap3-overo-storm-palo35.dtb \
-	omap3-overo-storm-palo43.dtb \
-	omap3-overo-storm-summit.dtb \
-	omap3-overo-storm-tobi.dtb \
-	omap3-overo-storm-tobiduo.dtb \
-	omap3-overo-summit.dtb \
-	omap3-overo-tobi.dtb \
-	omap3-overo-tobiduo.dtb \
-	omap3-pandora-600mhz.dtb \
-	omap3-pandora-1ghz.dtb \
-	omap3-sbc-t3517.dtb \
-	omap3-sbc-t3530.dtb \
-	omap3-sbc-t3730.dtb \
-	omap3-sniper.dtb \
-	omap3-thunder.dtb \
-	omap3-zoom3.dtb
-dtb-$(CONFIG_SOC_TI81XX) += \
-	am3874-iceboard.dtb \
-	dm8148-evm.dtb \
-	dm8148-t410.dtb \
-	dm8168-evm.dtb \
-	dra62x-j5eco-evm.dtb
-dtb-$(CONFIG_SOC_AM33XX) += \
-	am335x-baltos-ir2110.dtb \
-	am335x-baltos-ir3220.dtb \
-	am335x-baltos-ir5221.dtb \
-	am335x-base0033.dtb \
-	am335x-bone.dtb \
-	am335x-boneblack.dtb \
-	am335x-boneblack-wireless.dtb \
-	am335x-boneblue.dtb \
-	am335x-bonegreen.dtb \
-	am335x-bonegreen-wireless.dtb \
-	am335x-chiliboard.dtb \
-	am335x-cm-t335.dtb \
-	am335x-evm.dtb \
-	am335x-evmsk.dtb \
-	am335x-guardian.dtb \
-	am335x-icev2.dtb \
-	am335x-lxm.dtb \
-	am335x-moxa-uc-2101.dtb \
-	am335x-moxa-uc-8100-me-t.dtb \
-	am335x-myirtech-myd.dtb \
-	am335x-nano.dtb \
-	am335x-netcan-plus-1xx.dtb \
-	am335x-netcom-plus-2xx.dtb \
-	am335x-netcom-plus-8xx.dtb \
-	am335x-pdu001.dtb \
-	am335x-pepper.dtb \
-	am335x-phycore-rdk.dtb \
-	am335x-pocketbeagle.dtb \
-	am335x-regor-rdk.dtb \
-	am335x-sancloud-bbe.dtb \
-	am335x-sancloud-bbe-lite.dtb \
-	am335x-shc.dtb \
-	am335x-sbc-t335.dtb \
-	am335x-sl50.dtb \
-	am335x-wega-rdk.dtb \
-	am335x-osd3358-sm-red.dtb
-dtb-$(CONFIG_ARCH_OMAP4) += \
-	omap4-droid-bionic-xt875.dtb \
-	omap4-droid4-xt894.dtb \
-	omap4-duovero-parlor.dtb \
-	omap4-kc1.dtb \
-	omap4-panda.dtb \
-	omap4-panda-a4.dtb \
-	omap4-panda-es.dtb \
-	omap4-sdp.dtb \
-	omap4-sdp-es23plus.dtb \
-	omap4-var-dvk-om44.dtb \
-	omap4-var-stk-om44.dtb
-dtb-$(CONFIG_SOC_AM43XX) += \
-	am43x-epos-evm.dtb \
-	am437x-cm-t43.dtb \
-	am437x-gp-evm.dtb \
-	am437x-idk-evm.dtb \
-	am437x-sbc-t43.dtb \
-	am437x-sk-evm.dtb
-dtb-$(CONFIG_SOC_OMAP5) += \
-	omap5-cm-t54.dtb \
-	omap5-igep0050.dtb \
-	omap5-sbc-t54.dtb \
-	omap5-uevm.dtb
-dtb-$(CONFIG_SOC_DRA7XX) += \
-	am57xx-beagle-x15.dtb \
-	am57xx-beagle-x15-revb1.dtb \
-	am57xx-beagle-x15-revc.dtb \
-	am5729-beagleboneai.dtb \
-	am57xx-cl-som-am57x.dtb \
-	am57xx-sbc-am57x.dtb \
-	am572x-idk.dtb \
-	am571x-idk.dtb \
-	am574x-idk.dtb \
-	dra7-evm.dtb \
-	dra72-evm.dtb \
-	dra72-evm-revc.dtb \
-	dra71-evm.dtb \
-	dra76-evm.dtb
-dtb-$(CONFIG_ARCH_ORION5X) += \
-	orion5x-kuroboxpro.dtb \
-	orion5x-lacie-d2-network.dtb \
-	orion5x-lacie-ethernet-disk-mini-v2.dtb \
-	orion5x-linkstation-lsgl.dtb \
-	orion5x-linkstation-lswtgl.dtb \
-	orion5x-linkstation-lschl.dtb \
-	orion5x-lswsgl.dtb \
-	orion5x-maxtor-shared-storage-2.dtb \
-	orion5x-netgear-wnr854t.dtb \
-	orion5x-rd88f5182-nas.dtb
-dtb-$(CONFIG_ARCH_ACTIONS) += \
-	owl-s500-cubieboard6.dtb \
-	owl-s500-guitar-bb-rev-b.dtb \
-	owl-s500-labrador-base-m.dtb \
-	owl-s500-roseapplepi.dtb \
-	owl-s500-sparky.dtb
-dtb-$(CONFIG_ARCH_PXA) += \
-	pxa300-raumfeld-connector.dtb \
-	pxa300-raumfeld-controller.dtb \
-	pxa300-raumfeld-speaker-l.dtb \
-	pxa300-raumfeld-speaker-m.dtb \
-	pxa300-raumfeld-speaker-one.dtb \
-	pxa300-raumfeld-speaker-s.dtb
-dtb-$(CONFIG_ARCH_OXNAS) += \
-	ox810se-wd-mbwe.dtb \
-	ox820-cloudengines-pogoplug-series-3.dtb
-dtb-$(CONFIG_ARCH_QCOM) += \
-	qcom-apq8060-dragonboard.dtb \
-	qcom-apq8064-cm-qs600.dtb \
-	qcom-apq8064-ifc6410.dtb \
-	qcom-apq8064-sony-xperia-yuga.dtb \
-	qcom-apq8064-asus-nexus7-flo.dtb \
-	qcom-apq8074-dragonboard.dtb \
-	qcom-apq8084-ifc6540.dtb \
-	qcom-apq8084-mtp.dtb \
-	qcom-ipq4018-ap120c-ac.dtb \
-	qcom-ipq4018-ap120c-ac-bit.dtb \
-	qcom-ipq4018-jalapeno.dtb \
-	qcom-ipq4019-ap.dk01.1-c1.dtb \
-	qcom-ipq4019-ap.dk04.1-c1.dtb \
-	qcom-ipq4019-ap.dk04.1-c3.dtb \
-	qcom-ipq4019-ap.dk07.1-c1.dtb \
-	qcom-ipq4019-ap.dk07.1-c2.dtb \
-	qcom-ipq8064-ap148.dtb \
-	qcom-ipq8064-rb3011.dtb \
-	qcom-msm8226-samsung-s3ve3g.dtb \
-	qcom-msm8660-surf.dtb \
-	qcom-msm8960-cdp.dtb \
-	qcom-msm8974-fairphone-fp2.dtb \
-	qcom-msm8974-lge-nexus5-hammerhead.dtb \
-	qcom-msm8974-samsung-klte.dtb \
-	qcom-msm8974-sony-xperia-amami.dtb \
-	qcom-msm8974-sony-xperia-castor.dtb \
-	qcom-msm8974-sony-xperia-honami.dtb \
-	qcom-mdm9615-wp8548-mangoh-green.dtb \
-	qcom-sdx55-mtp.dtb \
-	qcom-sdx55-t55.dtb \
-	qcom-sdx55-telit-fn980-tlb.dtb
-dtb-$(CONFIG_ARCH_RDA) += \
-	rda8810pl-orangepi-2g-iot.dtb \
-	rda8810pl-orangepi-i96.dtb
-dtb-$(CONFIG_ARCH_REALTEK) += \
-	rtd1195-horseradish.dtb \
-	rtd1195-mele-x1000.dtb
-dtb-$(CONFIG_ARCH_REALVIEW) += \
-	arm-realview-pb1176.dtb \
-	arm-realview-pb11mp.dtb \
-	arm-realview-eb.dtb \
-	arm-realview-eb-bbrevd.dtb \
-	arm-realview-eb-11mp.dtb \
-	arm-realview-eb-11mp-bbrevd.dtb \
-	arm-realview-eb-11mp-ctrevb.dtb \
-	arm-realview-eb-11mp-bbrevd-ctrevb.dtb \
-	arm-realview-eb-a9mp.dtb \
-	arm-realview-eb-a9mp-bbrevd.dtb \
-	arm-realview-pba8.dtb \
-	arm-realview-pbx-a9.dtb
-dtb-$(CONFIG_ARCH_RENESAS) += \
-	emev2-kzm9d.dtb \
-	r7s72100-genmai.dtb \
-	r7s72100-gr-peach.dtb \
-	r7s72100-rskrza1.dtb \
-	r7s9210-rza2mevb.dtb \
-	r8a73a4-ape6evm.dtb \
-	r8a7740-armadillo800eva.dtb \
-	r8a7742-iwg21d-q7.dtb \
-	r8a7742-iwg21d-q7-dbcm-ca.dtb \
-	r8a7743-iwg20d-q7.dtb \
-	r8a7743-iwg20d-q7-dbcm-ca.dtb \
-	r8a7743-sk-rzg1m.dtb \
-	r8a7744-iwg20d-q7.dtb \
-	r8a7744-iwg20d-q7-dbcm-ca.dtb \
-	r8a7745-iwg22d-sodimm.dtb \
-	r8a7745-iwg22d-sodimm-dbhd-ca.dtb \
-	r8a7745-sk-rzg1e.dtb \
-	r8a77470-iwg23s-sbc.dtb \
-	r8a7778-bockw.dtb \
-	r8a7779-marzen.dtb \
-	r8a7790-lager.dtb \
-	r8a7790-stout.dtb \
-	r8a7791-koelsch.dtb \
-	r8a7791-porter.dtb \
-	r8a7792-blanche.dtb \
-	r8a7792-wheat.dtb \
-	r8a7793-gose.dtb \
-	r8a7794-alt.dtb \
-	r8a7794-silk.dtb \
-	r9a06g032-rzn1d400-db.dtb \
-	sh73a0-kzm9g.dtb
-dtb-$(CONFIG_ARCH_ROCKCHIP) += \
-	rv1108-elgin-r1.dtb \
-	rv1108-evb.dtb \
-	rk3036-evb.dtb \
-	rk3036-kylin.dtb \
-	rk3066a-bqcurie2.dtb \
-	rk3066a-marsboard.dtb \
-	rk3066a-mk808.dtb \
-	rk3066a-rayeager.dtb \
-	rk3188-bqedison2qc.dtb \
-	rk3188-px3-evb.dtb \
-	rk3188-radxarock.dtb \
-	rk3228-evb.dtb \
-	rk3229-evb.dtb \
-	rk3229-xms6.dtb \
-	rk3288-evb-act8846.dtb \
-	rk3288-evb-rk808.dtb \
-	rk3288-firefly-beta.dtb \
-	rk3288-firefly.dtb \
-	rk3288-firefly-reload.dtb \
-	rk3288-miqi.dtb \
-	rk3288-phycore-rdk.dtb \
-	rk3288-popmetal.dtb \
-	rk3288-r89.dtb \
-	rk3288-rock2-square.dtb \
-	rk3288-rock-pi-n8.dtb \
-	rk3288-tinker.dtb \
-	rk3288-tinker-s.dtb \
-	rk3288-veyron-brain.dtb \
-	rk3288-veyron-fievel.dtb \
-	rk3288-veyron-jaq.dtb \
-	rk3288-veyron-jerry.dtb \
-	rk3288-veyron-mickey.dtb \
-	rk3288-veyron-mighty.dtb \
-	rk3288-veyron-minnie.dtb \
-	rk3288-veyron-pinky.dtb \
-	rk3288-veyron-speedy.dtb \
-	rk3288-veyron-tiger.dtb \
-	rk3288-vyasa.dtb
-dtb-$(CONFIG_ARCH_S3C24XX) += \
-	s3c2416-smdk2416.dtb
-dtb-$(CONFIG_ARCH_S3C64XX) += \
-	s3c6410-mini6410.dtb \
-	s3c6410-smdk6410.dtb
-dtb-$(CONFIG_ARCH_S5PV210) += \
-	s5pv210-aquila.dtb \
-	s5pv210-fascinate4g.dtb \
-	s5pv210-galaxys.dtb \
-	s5pv210-goni.dtb \
-	s5pv210-smdkc110.dtb \
-	s5pv210-smdkv210.dtb \
-	s5pv210-torbreck.dtb
-dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += \
-	socfpga_arria5_socdk.dtb \
-	socfpga_arria10_socdk_nand.dtb \
-	socfpga_arria10_socdk_qspi.dtb \
-	socfpga_arria10_socdk_sdmmc.dtb \
-	socfpga_cyclone5_chameleon96.dtb \
-	socfpga_cyclone5_mcvevk.dtb \
-	socfpga_cyclone5_socdk.dtb \
-	socfpga_cyclone5_de0_nano_soc.dtb \
-	socfpga_cyclone5_sockit.dtb \
-	socfpga_cyclone5_socrates.dtb \
-	socfpga_cyclone5_sodia.dtb \
-	socfpga_cyclone5_vining_fpga.dtb \
-	socfpga_vt.dtb
-dtb-$(CONFIG_ARCH_SPEAR13XX) += \
-	spear1310-evb.dtb \
-	spear1340-evb.dtb
-dtb-$(CONFIG_ARCH_SPEAR3XX) += \
-	spear300-evb.dtb \
-	spear310-evb.dtb \
-	spear320-evb.dtb \
-	spear320-hmi.dtb
-dtb-$(CONFIG_ARCH_SPEAR6XX) += \
-	spear600-evb.dtb
-dtb-$(CONFIG_ARCH_STI) += \
-	stih407-b2120.dtb \
-	stih410-b2120.dtb \
-	stih410-b2260.dtb \
-	stih418-b2199.dtb \
-	stih418-b2264.dtb
-dtb-$(CONFIG_ARCH_STM32) += \
-	stm32f429-disco.dtb \
-	stm32f469-disco.dtb \
-	stm32f746-disco.dtb \
-	stm32f769-disco.dtb \
-	stm32429i-eval.dtb \
-	stm32746g-eval.dtb \
-	stm32h743i-eval.dtb \
-	stm32h743i-disco.dtb \
-	stm32h750i-art-pi.dtb \
-	stm32mp153c-dhcom-drc02.dtb \
-	stm32mp157a-avenger96.dtb \
-	stm32mp157a-dhcor-avenger96.dtb \
-	stm32mp157a-dk1.dtb \
-	stm32mp157a-iot-box.dtb \
-	stm32mp157a-microgea-stm32mp1-microdev2.0.dtb \
-	stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dtb \
-	stm32mp157a-icore-stm32mp1-ctouch2.dtb \
-	stm32mp157a-icore-stm32mp1-edimm2.2.dtb \
-	stm32mp157a-stinger96.dtb \
-	stm32mp157c-dhcom-pdk2.dtb \
-	stm32mp157c-dhcom-picoitx.dtb \
-	stm32mp157c-dk2.dtb \
-	stm32mp157c-ed1.dtb \
-	stm32mp157c-ev1.dtb \
-	stm32mp157c-lxa-mc1.dtb \
-	stm32mp157c-odyssey.dtb
-dtb-$(CONFIG_MACH_SUN4I) += \
-	sun4i-a10-a1000.dtb \
-	sun4i-a10-ba10-tvbox.dtb \
-	sun4i-a10-chuwi-v7-cw0825.dtb \
-	sun4i-a10-cubieboard.dtb \
-	sun4i-a10-dserve-dsrv9703c.dtb \
-	sun4i-a10-gemei-g9.dtb \
-	sun4i-a10-hackberry.dtb \
-	sun4i-a10-hyundai-a7hd.dtb \
-	sun4i-a10-inet1.dtb \
-	sun4i-a10-inet97fv2.dtb \
-	sun4i-a10-inet9f-rev03.dtb \
-	sun4i-a10-itead-iteaduino-plus.dtb \
-	sun4i-a10-jesurun-q5.dtb \
-	sun4i-a10-marsboard.dtb \
-	sun4i-a10-mini-xplus.dtb \
-	sun4i-a10-mk802.dtb \
-	sun4i-a10-mk802ii.dtb \
-	sun4i-a10-olinuxino-lime.dtb \
-	sun4i-a10-pcduino.dtb \
-	sun4i-a10-pcduino2.dtb \
-	sun4i-a10-pov-protab2-ips9.dtb \
-	sun4i-a10-topwise-a721.dtb
-dtb-$(CONFIG_MACH_SUN5I) += \
-	sun5i-a10s-auxtek-t003.dtb \
-	sun5i-a10s-auxtek-t004.dtb \
-	sun5i-a10s-mk802.dtb \
-	sun5i-a10s-olinuxino-micro.dtb \
-	sun5i-a10s-r7-tv-dongle.dtb \
-	sun5i-a10s-wobo-i5.dtb \
-	sun5i-a13-difrnce-dit4350.dtb \
-	sun5i-a13-empire-electronix-d709.dtb \
-	sun5i-a13-empire-electronix-m712.dtb \
-	sun5i-a13-hsg-h702.dtb \
-	sun5i-a13-inet-98v-rev2.dtb \
-	sun5i-a13-licheepi-one.dtb \
-	sun5i-a13-olinuxino.dtb \
-	sun5i-a13-olinuxino-micro.dtb \
-	sun5i-a13-pocketbook-touch-lux-3.dtb \
-	sun5i-a13-q8-tablet.dtb \
-	sun5i-a13-utoo-p66.dtb \
-	sun5i-gr8-chip-pro.dtb \
-	sun5i-gr8-evb.dtb \
-	sun5i-r8-chip.dtb
-dtb-$(CONFIG_MACH_SUN6I) += \
-	sun6i-a31-app4-evb1.dtb \
-	sun6i-a31-colombus.dtb \
-	sun6i-a31-hummingbird.dtb \
-	sun6i-a31-i7.dtb \
-	sun6i-a31-m9.dtb \
-	sun6i-a31-mele-a1000g-quad.dtb \
-	sun6i-a31s-colorfly-e708-q1.dtb \
-	sun6i-a31s-cs908.dtb \
-	sun6i-a31s-inet-q972.dtb \
-	sun6i-a31s-primo81.dtb \
-	sun6i-a31s-sina31s.dtb \
-	sun6i-a31s-sinovoip-bpi-m2.dtb \
-	sun6i-a31s-yones-toptech-bs1078-v2.dtb
-dtb-$(CONFIG_MACH_SUN7I) += \
-	sun7i-a20-bananapi.dtb \
-	sun7i-a20-bananapi-m1-plus.dtb \
-	sun7i-a20-bananapro.dtb \
-	sun7i-a20-cubieboard2.dtb \
-	sun7i-a20-cubietruck.dtb \
-	sun7i-a20-hummingbird.dtb \
-	sun7i-a20-itead-ibox.dtb \
-	sun7i-a20-i12-tvbox.dtb \
-	sun7i-a20-icnova-swac.dtb \
-	sun7i-a20-lamobo-r1.dtb \
-	sun7i-a20-linutronix-testbox-v2.dtb \
-	sun7i-a20-m3.dtb \
-	sun7i-a20-mk808c.dtb \
-	sun7i-a20-olimex-som-evb.dtb \
-	sun7i-a20-olimex-som-evb-emmc.dtb \
-	sun7i-a20-olimex-som204-evb.dtb \
-	sun7i-a20-olimex-som204-evb-emmc.dtb \
-	sun7i-a20-olinuxino-lime.dtb \
-	sun7i-a20-olinuxino-lime-emmc.dtb \
-	sun7i-a20-olinuxino-lime2.dtb \
-	sun7i-a20-olinuxino-lime2-emmc.dtb \
-	sun7i-a20-olinuxino-micro.dtb \
-	sun7i-a20-olinuxino-micro-emmc.dtb \
-	sun7i-a20-orangepi.dtb \
-	sun7i-a20-orangepi-mini.dtb \
-	sun7i-a20-pcduino3.dtb \
-	sun7i-a20-pcduino3-nano.dtb \
-	sun7i-a20-wexler-tab7200.dtb \
-	sun7i-a20-wits-pro-a20-dkt.dtb
-dtb-$(CONFIG_MACH_SUN8I) += \
-	sun8i-a23-evb.dtb \
-	sun8i-a23-gt90h-v4.dtb \
-	sun8i-a23-inet86dz.dtb \
-	sun8i-a23-ippo-q8h-v5.dtb \
-	sun8i-a23-ippo-q8h-v1.2.dtb \
-	sun8i-a23-polaroid-mid2407pxe03.dtb \
-	sun8i-a23-polaroid-mid2809pxe04.dtb \
-	sun8i-a23-q8-tablet.dtb \
-	sun8i-a33-et-q8-v1.6.dtb \
-	sun8i-a33-ga10h-v1.1.dtb \
-	sun8i-a33-inet-d978-rev2.dtb \
-	sun8i-a33-ippo-q8h-v1.2.dtb \
-	sun8i-a33-olinuxino.dtb \
-	sun8i-a33-q8-tablet.dtb \
-	sun8i-a33-sinlinx-sina33.dtb \
-	sun8i-a83t-allwinner-h8homlet-v2.dtb \
-	sun8i-a83t-bananapi-m3.dtb \
-	sun8i-a83t-cubietruck-plus.dtb \
-	sun8i-a83t-tbs-a711.dtb \
-	sun8i-h2-plus-bananapi-m2-zero.dtb \
-	sun8i-h2-plus-libretech-all-h3-cc.dtb \
-	sun8i-h2-plus-orangepi-r1.dtb \
-	sun8i-h2-plus-orangepi-zero.dtb \
-	sun8i-h3-bananapi-m2-plus.dtb \
-	sun8i-h3-bananapi-m2-plus-v1.2.dtb \
-	sun8i-h3-beelink-x2.dtb \
-	sun8i-h3-libretech-all-h3-cc.dtb \
-	sun8i-h3-mapleboard-mp130.dtb \
-	sun8i-h3-nanopi-duo2.dtb \
-	sun8i-h3-nanopi-m1.dtb	\
-	sun8i-h3-nanopi-m1-plus.dtb \
-	sun8i-h3-nanopi-neo.dtb \
-	sun8i-h3-nanopi-neo-air.dtb \
-	sun8i-h3-nanopi-r1.dtb \
-	sun8i-h3-orangepi-2.dtb \
-	sun8i-h3-orangepi-lite.dtb \
-	sun8i-h3-orangepi-one.dtb \
-	sun8i-h3-orangepi-pc.dtb \
-	sun8i-h3-orangepi-pc-plus.dtb \
-	sun8i-h3-orangepi-plus.dtb \
-	sun8i-h3-orangepi-plus2e.dtb \
-	sun8i-h3-orangepi-zero-plus2.dtb \
-	sun8i-h3-rervision-dvk.dtb \
-	sun8i-h3-zeropi.dtb \
-	sun8i-h3-emlid-neutis-n5h3-devboard.dtb \
-	sun8i-r16-bananapi-m2m.dtb \
-	sun8i-r16-nintendo-nes-classic.dtb \
-	sun8i-r16-nintendo-super-nes-classic.dtb \
-	sun8i-r16-parrot.dtb \
-	sun8i-r40-bananapi-m2-ultra.dtb \
-	sun8i-r40-oka40i-c.dtb \
-	sun8i-s3-elimo-initium.dtb \
-	sun8i-s3-lichee-zero-plus.dtb \
-	sun8i-s3-pinecube.dtb \
-	sun8i-t3-cqa3t-bv3.dtb \
-	sun8i-v3-sl631-imx179.dtb \
-	sun8i-v3s-licheepi-zero.dtb \
-	sun8i-v3s-licheepi-zero-dock.dtb \
-	sun8i-v40-bananapi-m2-berry.dtb
-dtb-$(CONFIG_MACH_SUN9I) += \
-	sun9i-a80-optimus.dtb \
-	sun9i-a80-cubieboard4.dtb
-dtb-$(CONFIG_MACH_SUNIV) += \
-	suniv-f1c100s-licheepi-nano.dtb
-dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
-	tegra20-acer-a500-picasso.dtb \
-	tegra20-harmony.dtb \
-	tegra20-colibri-eval-v3.dtb \
-	tegra20-colibri-iris.dtb \
-	tegra20-medcom-wide.dtb \
-	tegra20-paz00.dtb \
-	tegra20-plutux.dtb \
-	tegra20-seaboard.dtb \
-	tegra20-tec.dtb \
-	tegra20-trimslice.dtb \
-	tegra20-ventana.dtb
-dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \
-	tegra30-apalis-eval.dtb \
-	tegra30-apalis-v1.1-eval.dtb \
-	tegra30-asus-nexus7-grouper-PM269.dtb \
-	tegra30-asus-nexus7-grouper-E1565.dtb \
-	tegra30-asus-nexus7-tilapia-E1565.dtb \
-	tegra30-beaver.dtb \
-	tegra30-cardhu-a02.dtb \
-	tegra30-cardhu-a04.dtb \
-	tegra30-colibri-eval-v3.dtb \
-	tegra30-ouya.dtb
-dtb-$(CONFIG_ARCH_TEGRA_114_SOC) += \
-	tegra114-dalmore.dtb \
-	tegra114-roth.dtb \
-	tegra114-tn7.dtb
-dtb-$(CONFIG_ARCH_TEGRA_124_SOC) += \
-	tegra124-apalis-eval.dtb \
-	tegra124-apalis-v1.2-eval.dtb \
-	tegra124-jetson-tk1.dtb \
-	tegra124-nyan-big.dtb \
-	tegra124-nyan-blaze.dtb \
-	tegra124-venice2.dtb
-dtb-$(CONFIG_ARCH_U8500) += \
-	ste-snowball.dtb \
-	ste-hrefprev60-stuib.dtb \
-	ste-hrefprev60-tvk.dtb \
-	ste-hrefv60plus-stuib.dtb \
-	ste-hrefv60plus-tvk.dtb \
-	ste-href520-tvk.dtb \
-	ste-ux500-samsung-golden.dtb \
-	ste-ux500-samsung-janice.dtb \
-	ste-ux500-samsung-gavini.dtb \
-	ste-ux500-samsung-codina.dtb \
-	ste-ux500-samsung-skomer.dtb \
-	ste-ux500-samsung-kyle.dtb
-dtb-$(CONFIG_ARCH_UNIPHIER) += \
-	uniphier-ld4-ref.dtb \
-	uniphier-ld6b-ref.dtb \
-	uniphier-pro4-ace.dtb \
-	uniphier-pro4-ref.dtb \
-	uniphier-pro4-sanji.dtb \
-	uniphier-pxs2-gentil.dtb \
-	uniphier-pxs2-vodka.dtb \
-	uniphier-sld8-ref.dtb
-dtb-$(CONFIG_ARCH_VERSATILE) += \
-	versatile-ab.dtb \
-	versatile-ab-ib2.dtb \
-	versatile-pb.dtb
-dtb-$(CONFIG_ARCH_VEXPRESS) += \
-	vexpress-v2p-ca5s.dtb \
-	vexpress-v2p-ca9.dtb \
-	vexpress-v2p-ca15-tc1.dtb \
-	vexpress-v2p-ca15_a7.dtb
-dtb-$(CONFIG_ARCH_VIRT) += \
-	xenvm-4.2.dtb
-dtb-$(CONFIG_ARCH_VT8500) += \
-	vt8500-bv07.dtb \
-	wm8505-ref.dtb \
-	wm8650-mid.dtb \
-	wm8750-apc8750.dtb \
-	wm8850-w70v2.dtb
-dtb-$(CONFIG_ARCH_ZYNQ) += \
-	zynq-cc108.dtb \
-	zynq-ebaz4205.dtb \
-	zynq-microzed.dtb \
-	zynq-parallella.dtb \
-	zynq-zc702.dtb \
-	zynq-zc706.dtb \
-	zynq-zc770-xm010.dtb \
-	zynq-zc770-xm011.dtb \
-	zynq-zc770-xm012.dtb \
-	zynq-zc770-xm013.dtb \
-	zynq-zed.dtb \
-	zynq-zturn.dtb \
-	zynq-zturn-v5.dtb \
-	zynq-zybo.dtb \
-	zynq-zybo-z7.dtb
-dtb-$(CONFIG_MACH_ARMADA_370) += \
-	armada-370-db.dtb \
-	armada-370-dlink-dns327l.dtb \
-	armada-370-mirabox.dtb \
-	armada-370-netgear-rn102.dtb \
-	armada-370-netgear-rn104.dtb \
-	armada-370-rd.dtb \
-	armada-370-seagate-nas-2bay.dtb \
-	armada-370-seagate-nas-4bay.dtb \
-	armada-370-seagate-personal-cloud.dtb \
-	armada-370-seagate-personal-cloud-2bay.dtb \
-	armada-370-synology-ds213j.dtb
-dtb-$(CONFIG_MACH_ARMADA_375) += \
-	armada-375-db.dtb
-dtb-$(CONFIG_MACH_ARMADA_38X) += \
-	armada-382-rd-ac3x-48g4x2xl.dtb \
-	armada-385-atl-x530.dtb\
-	armada-385-clearfog-gtr-s4.dtb \
-	armada-385-clearfog-gtr-l8.dtb \
-	armada-385-db-88f6820-amc.dtb \
-	armada-385-db-ap.dtb \
-	armada-385-linksys-caiman.dtb \
-	armada-385-linksys-cobra.dtb \
-	armada-385-linksys-rango.dtb \
-	armada-385-linksys-shelby.dtb \
-	armada-385-synology-ds116.dtb \
-	armada-385-turris-omnia.dtb \
-	armada-388-clearfog.dtb \
-	armada-388-clearfog-base.dtb \
-	armada-388-clearfog-pro.dtb \
-	armada-388-db.dtb \
-	armada-388-gp.dtb \
-	armada-388-helios4.dtb \
-	armada-388-rd.dtb
-dtb-$(CONFIG_MACH_ARMADA_39X) += \
-	armada-398-db.dtb
-dtb-$(CONFIG_MACH_ARMADA_XP) += \
-	armada-xp-axpwifiap.dtb \
-	armada-xp-crs305-1g-4s.dtb \
-	armada-xp-crs305-1g-4s-bit.dtb \
-	armada-xp-crs326-24g-2s.dtb \
-	armada-xp-crs326-24g-2s-bit.dtb \
-	armada-xp-crs328-4c-20s-4s.dtb \
-	armada-xp-crs328-4c-20s-4s-bit.dtb \
-	armada-xp-db.dtb \
-	armada-xp-db-dxbc2.dtb \
-	armada-xp-db-xc3-24g4xg.dtb \
-	armada-xp-gp.dtb \
-	armada-xp-lenovo-ix4-300d.dtb \
-	armada-xp-linksys-mamba.dtb \
-	armada-xp-matrix.dtb \
-	armada-xp-netgear-rn2120.dtb \
-	armada-xp-openblocks-ax3-4.dtb \
-	armada-xp-synology-ds414.dtb
-dtb-$(CONFIG_MACH_DOVE) += \
-	dove-cubox.dtb \
-	dove-cubox-es.dtb \
-	dove-d2plug.dtb \
-	dove-d3plug.dtb \
-	dove-dove-db.dtb \
-	dove-sbc-a510.dtb
-dtb-$(CONFIG_ARCH_MEDIATEK) += \
-	mt2701-evb.dtb \
-	mt6580-evbp1.dtb \
-	mt6589-aquaris5.dtb \
-	mt6592-evb.dtb \
-	mt7623a-rfb-emmc.dtb \
-	mt7623a-rfb-nand.dtb \
-	mt7623n-rfb-emmc.dtb \
-	mt7623n-bananapi-bpi-r2.dtb \
-	mt7629-rfb.dtb \
-	mt8127-moose.dtb \
-	mt8135-evbp1.dtb
-dtb-$(CONFIG_ARCH_MILBEAUT) += milbeaut-m10v-evb.dtb
-dtb-$(CONFIG_ARCH_MSTARV7) += \
-	mstar-infinity-msc313-breadbee_crust.dtb \
-	mstar-infinity2m-ssd202d-ssd201htv2.dtb \
-	mstar-infinity2m-ssd202d-unitv2.dtb \
-	mstar-infinity3-msc313e-breadbee.dtb \
-	mstar-mercury5-ssc8336n-midrived08.dtb
-dtb-$(CONFIG_ARCH_ASPEED) += \
-	aspeed-ast2500-evb.dtb \
-	aspeed-ast2600-evb-a1.dtb \
-	aspeed-ast2600-evb.dtb \
-	aspeed-bmc-amd-ethanolx.dtb \
-	aspeed-bmc-ampere-mtjade.dtb \
-	aspeed-bmc-arm-centriq2400-rep.dtb \
-	aspeed-bmc-arm-stardragon4800-rep2.dtb \
-	aspeed-bmc-asrock-e3c246d4i.dtb \
-	aspeed-bmc-bytedance-g220a.dtb \
-	aspeed-bmc-facebook-cloudripper.dtb \
-	aspeed-bmc-facebook-cmm.dtb \
-	aspeed-bmc-facebook-elbert.dtb \
-	aspeed-bmc-facebook-fuji.dtb \
-	aspeed-bmc-facebook-galaxy100.dtb \
-	aspeed-bmc-facebook-minipack.dtb \
-	aspeed-bmc-facebook-tiogapass.dtb \
-	aspeed-bmc-facebook-wedge40.dtb \
-	aspeed-bmc-facebook-wedge100.dtb \
-	aspeed-bmc-facebook-wedge400.dtb \
-	aspeed-bmc-facebook-yamp.dtb \
-	aspeed-bmc-facebook-yosemitev2.dtb \
-	aspeed-bmc-ibm-everest.dtb \
-	aspeed-bmc-ibm-rainier.dtb \
-	aspeed-bmc-ibm-rainier-1s4u.dtb \
-	aspeed-bmc-ibm-rainier-4u.dtb \
-	aspeed-bmc-intel-s2600wf.dtb \
-	aspeed-bmc-inspur-fp5280g2.dtb \
-	aspeed-bmc-inspur-nf5280m6.dtb \
-	aspeed-bmc-lenovo-hr630.dtb \
-	aspeed-bmc-lenovo-hr855xg2.dtb \
-	aspeed-bmc-microsoft-olympus.dtb \
-	aspeed-bmc-opp-lanyang.dtb \
-	aspeed-bmc-opp-mihawk.dtb \
-	aspeed-bmc-opp-mowgli.dtb \
-	aspeed-bmc-opp-nicole.dtb \
-	aspeed-bmc-opp-palmetto.dtb \
-	aspeed-bmc-opp-romulus.dtb \
-	aspeed-bmc-opp-swift.dtb \
-	aspeed-bmc-opp-tacoma.dtb \
-	aspeed-bmc-opp-vesnin.dtb \
-	aspeed-bmc-opp-witherspoon.dtb \
-	aspeed-bmc-opp-zaius.dtb \
-	aspeed-bmc-portwell-neptune.dtb \
-	aspeed-bmc-quanta-q71l.dtb \
-	aspeed-bmc-supermicro-x11spi.dtb
+subdir-y += actions
+subdir-y += airoha
+subdir-y += allwinner
+subdir-y += alphascale
+subdir-y += amazon
+subdir-y += amlogic
+subdir-y += arm
+subdir-y += aspeed
+subdir-y += axis
+subdir-y += broadcom
+subdir-y += calxeda
+subdir-y += cirrus
+subdir-y += cnxt
+subdir-y += gemini
+subdir-y += hisilicon
+subdir-y += hpe
+subdir-y += intel
+subdir-y += marvell
+subdir-y += mediatek
+subdir-y += microchip
+subdir-y += moxa
+subdir-y += nspire
+subdir-y += nuvoton
+subdir-y += nvidia
+subdir-y += nxp
+subdir-y += qcom
+subdir-y += realtek
+subdir-y += renesas
+subdir-y += rockchip
+subdir-y += samsung
+subdir-y += sigmastar
+subdir-y += socionext
+subdir-y += st
+subdir-y += sunplus
+subdir-y += synaptics
+subdir-y += ti
+subdir-y += unisoc
+subdir-y += vt8500
+subdir-y += xen
+subdir-y += xilinx
diff --git a/arch/arm/boot/dts/actions/Makefile b/arch/arm/boot/dts/actions/Makefile
new file mode 100644
index 000000000000..f384e4a48e6f
--- /dev/null
+++ b/arch/arm/boot/dts/actions/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_ACTIONS) += \
+	owl-s500-cubieboard6.dtb \
+	owl-s500-guitar-bb-rev-b.dtb \
+	owl-s500-labrador-base-m.dtb \
+	owl-s500-roseapplepi.dtb \
+	owl-s500-sparky.dtb
diff --git a/arch/arm/boot/dts/owl-s500-cubieboard6.dts b/arch/arm/boot/dts/actions/owl-s500-cubieboard6.dts
index c2b02895910c..c2b02895910c 100644
--- a/arch/arm/boot/dts/owl-s500-cubieboard6.dts
+++ b/arch/arm/boot/dts/actions/owl-s500-cubieboard6.dts
diff --git a/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts b/arch/arm/boot/dts/actions/owl-s500-guitar-bb-rev-b.dts
index 7ae34a23e320..7ae34a23e320 100644
--- a/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts
+++ b/arch/arm/boot/dts/actions/owl-s500-guitar-bb-rev-b.dts
diff --git a/arch/arm/boot/dts/owl-s500-guitar.dtsi b/arch/arm/boot/dts/actions/owl-s500-guitar.dtsi
index 81cc39871f17..81cc39871f17 100644
--- a/arch/arm/boot/dts/owl-s500-guitar.dtsi
+++ b/arch/arm/boot/dts/actions/owl-s500-guitar.dtsi
diff --git a/arch/arm/boot/dts/owl-s500-labrador-base-m.dts b/arch/arm/boot/dts/actions/owl-s500-labrador-base-m.dts
index 1585e33f703b..1585e33f703b 100644
--- a/arch/arm/boot/dts/owl-s500-labrador-base-m.dts
+++ b/arch/arm/boot/dts/actions/owl-s500-labrador-base-m.dts
diff --git a/arch/arm/boot/dts/owl-s500-labrador-v2.dtsi b/arch/arm/boot/dts/actions/owl-s500-labrador-v2.dtsi
index 883ff2f9886d..883ff2f9886d 100644
--- a/arch/arm/boot/dts/owl-s500-labrador-v2.dtsi
+++ b/arch/arm/boot/dts/actions/owl-s500-labrador-v2.dtsi
diff --git a/arch/arm/boot/dts/owl-s500-roseapplepi.dts b/arch/arm/boot/dts/actions/owl-s500-roseapplepi.dts
index eb555f385283..eb555f385283 100644
--- a/arch/arm/boot/dts/owl-s500-roseapplepi.dts
+++ b/arch/arm/boot/dts/actions/owl-s500-roseapplepi.dts
diff --git a/arch/arm/boot/dts/owl-s500-sparky.dts b/arch/arm/boot/dts/actions/owl-s500-sparky.dts
index 9d8f7336bec0..9d8f7336bec0 100644
--- a/arch/arm/boot/dts/owl-s500-sparky.dts
+++ b/arch/arm/boot/dts/actions/owl-s500-sparky.dts
diff --git a/arch/arm/boot/dts/owl-s500.dtsi b/arch/arm/boot/dts/actions/owl-s500.dtsi
index 739b4b9cec8c..739b4b9cec8c 100644
--- a/arch/arm/boot/dts/owl-s500.dtsi
+++ b/arch/arm/boot/dts/actions/owl-s500.dtsi
diff --git a/arch/arm/boot/dts/airoha/Makefile b/arch/arm/boot/dts/airoha/Makefile
new file mode 100644
index 000000000000..00c31389f622
--- /dev/null
+++ b/arch/arm/boot/dts/airoha/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_AIROHA) += \
+	en7523-evb.dtb
diff --git a/arch/arm/boot/dts/airoha/en7523-evb.dts b/arch/arm/boot/dts/airoha/en7523-evb.dts
new file mode 100644
index 000000000000..f23a25cce119
--- /dev/null
+++ b/arch/arm/boot/dts/airoha/en7523-evb.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/dts-v1/;
+
+/* Bootloader installs ATF here */
+/memreserve/ 0x80000000 0x200000;
+
+#include "en7523.dtsi"
+
+/ {
+	model = "Airoha EN7523 Evaluation Board";
+	compatible = "airoha,en7523-evb", "airoha,en7523";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+		stdout-path = "serial0:115200n8";
+		linux,usable-memory-range = <0x80200000 0x1fe00000>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/airoha/en7523.dtsi b/arch/arm/boot/dts/airoha/en7523.dtsi
new file mode 100644
index 000000000000..b523a868c4ad
--- /dev/null
+++ b/arch/arm/boot/dts/airoha/en7523.dtsi
@@ -0,0 +1,206 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/en7523-clk.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		npu_binary@84000000 {
+			no-map;
+			reg = <0x84000000 0xA00000>;
+		};
+
+		npu_flag@84B0000 {
+			no-map;
+			reg = <0x84B00000 0x100000>;
+		};
+
+		npu_pkt@85000000 {
+			no-map;
+			reg = <0x85000000 0x1A00000>;
+		};
+
+		npu_phyaddr@86B00000 {
+			no-map;
+			reg = <0x86B00000 0x100000>;
+		};
+
+		npu_rxdesc@86D00000 {
+			no-map;
+			reg = <0x86D00000 0x100000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			enable-method = "psci";
+			clock-frequency = <80000000>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			enable-method = "psci";
+			clock-frequency = <80000000>;
+			next-level-cache = <&L2_0>;
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	scu: system-controller@1fa20000 {
+		compatible = "airoha,en7523-scu";
+		reg = <0x1fa20000 0x400>,
+		      <0x1fb00000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	gic: interrupt-controller@9000000 {
+		compatible = "arm,gic-v3";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x09000000 0x20000>,
+		      <0x09080000 0x80000>,
+		      <0x09400000 0x2000>,
+		      <0x09500000 0x2000>,
+		      <0x09600000 0x20000>;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	uart1: serial@1fbf0000 {
+		compatible = "ns16550";
+		reg = <0x1fbf0000 0x30>;
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <1843200>;
+		status = "okay";
+	};
+
+	gpio0: gpio@1fbf0200 {
+		compatible = "airoha,en7523-gpio";
+		reg = <0x1fbf0204 0x4>,
+		      <0x1fbf0200 0x4>,
+		      <0x1fbf0220 0x4>,
+		      <0x1fbf0214 0x4>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio1: gpio@1fbf0270 {
+		compatible = "airoha,en7523-gpio";
+		reg = <0x1fbf0270 0x4>,
+		      <0x1fbf0260 0x4>,
+		      <0x1fbf0264 0x4>,
+		      <0x1fbf0278 0x4>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pcie0: pcie@1fa91000 {
+		compatible = "airoha,en7523-pcie", "mediatek,mt7622-pcie";
+		device_type = "pci";
+		reg = <0x1fa91000 0x1000>;
+		reg-names = "port0";
+		linux,pci-domain = <0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "pcie_irq";
+		clocks = <&scu EN7523_CLK_PCIE>;
+		clock-names = "sys_ck0";
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x20000000  0x20000000  0 0x8000000>;
+		status = "disabled";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+				<0 0 0 2 &pcie_intc0 1>,
+				<0 0 0 3 &pcie_intc0 2>,
+				<0 0 0 4 &pcie_intc0 3>;
+		pcie_intc0: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+
+	pcie1: pcie@1fa92000 {
+		compatible = "airoha,en7523-pcie", "mediatek,mt7622-pcie";
+		device_type = "pci";
+		reg = <0x1fa92000 0x1000>;
+		reg-names = "port1";
+		linux,pci-domain = <1>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "pcie_irq";
+		clocks = <&scu EN7523_CLK_PCIE>;
+		clock-names = "sys_ck1";
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x28000000  0x28000000  0 0x8000000>;
+		status = "disabled";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+				<0 0 0 2 &pcie_intc1 1>,
+				<0 0 0 3 &pcie_intc1 2>,
+				<0 0 0 4 &pcie_intc1 3>;
+		pcie_intc1: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/Makefile b/arch/arm/boot/dts/allwinner/Makefile
new file mode 100644
index 000000000000..f71392a55df8
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/Makefile
@@ -0,0 +1,283 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_MACH_SUN4I) += \
+	sun4i-a10-a1000.dtb \
+	sun4i-a10-ba10-tvbox.dtb \
+	sun4i-a10-chuwi-v7-cw0825.dtb \
+	sun4i-a10-cubieboard.dtb \
+	sun4i-a10-dserve-dsrv9703c.dtb \
+	sun4i-a10-gemei-g9.dtb \
+	sun4i-a10-hackberry.dtb \
+	sun4i-a10-hyundai-a7hd.dtb \
+	sun4i-a10-inet1.dtb \
+	sun4i-a10-inet97fv2.dtb \
+	sun4i-a10-inet9f-rev03.dtb \
+	sun4i-a10-itead-iteaduino-plus.dtb \
+	sun4i-a10-jesurun-q5.dtb \
+	sun4i-a10-marsboard.dtb \
+	sun4i-a10-mini-xplus.dtb \
+	sun4i-a10-mk802.dtb \
+	sun4i-a10-mk802ii.dtb \
+	sun4i-a10-olinuxino-lime.dtb \
+	sun4i-a10-pcduino.dtb \
+	sun4i-a10-pcduino2.dtb \
+	sun4i-a10-pov-protab2-ips9.dtb \
+	sun4i-a10-topwise-a721.dtb
+dtb-$(CONFIG_MACH_SUN4I) += \
+	sun4i-a10-a1000.dtb \
+	sun4i-a10-ba10-tvbox.dtb \
+	sun4i-a10-chuwi-v7-cw0825.dtb \
+	sun4i-a10-cubieboard.dtb \
+	sun4i-a10-dserve-dsrv9703c.dtb \
+	sun4i-a10-gemei-g9.dtb \
+	sun4i-a10-hackberry.dtb \
+	sun4i-a10-hyundai-a7hd.dtb \
+	sun4i-a10-inet1.dtb \
+	sun4i-a10-inet97fv2.dtb \
+	sun4i-a10-inet9f-rev03.dtb \
+	sun4i-a10-itead-iteaduino-plus.dtb \
+	sun4i-a10-jesurun-q5.dtb \
+	sun4i-a10-marsboard.dtb \
+	sun4i-a10-mini-xplus.dtb \
+	sun4i-a10-mk802.dtb \
+	sun4i-a10-mk802ii.dtb \
+	sun4i-a10-olinuxino-lime.dtb \
+	sun4i-a10-pcduino.dtb \
+	sun4i-a10-pcduino2.dtb \
+	sun4i-a10-pov-protab2-ips9.dtb \
+	sun4i-a10-topwise-a721.dtb
+dtb-$(CONFIG_MACH_SUN5I) += \
+	sun5i-a10s-auxtek-t003.dtb \
+	sun5i-a10s-auxtek-t004.dtb \
+	sun5i-a10s-mk802.dtb \
+	sun5i-a10s-olinuxino-micro.dtb \
+	sun5i-a10s-r7-tv-dongle.dtb \
+	sun5i-a10s-wobo-i5.dtb \
+	sun5i-a13-difrnce-dit4350.dtb \
+	sun5i-a13-empire-electronix-d709.dtb \
+	sun5i-a13-empire-electronix-m712.dtb \
+	sun5i-a13-hsg-h702.dtb \
+	sun5i-a13-inet-98v-rev2.dtb \
+	sun5i-a13-licheepi-one.dtb \
+	sun5i-a13-olinuxino.dtb \
+	sun5i-a13-olinuxino-micro.dtb \
+	sun5i-a13-pocketbook-touch-lux-3.dtb \
+	sun5i-a13-pocketbook-614-plus.dtb \
+	sun5i-a13-q8-tablet.dtb \
+	sun5i-a13-utoo-p66.dtb \
+	sun5i-gr8-chip-pro.dtb \
+	sun5i-gr8-evb.dtb \
+	sun5i-r8-chip.dtb
+dtb-$(CONFIG_MACH_SUN5I) += \
+	sun5i-a10s-auxtek-t003.dtb \
+	sun5i-a10s-auxtek-t004.dtb \
+	sun5i-a10s-mk802.dtb \
+	sun5i-a10s-olinuxino-micro.dtb \
+	sun5i-a10s-r7-tv-dongle.dtb \
+	sun5i-a10s-wobo-i5.dtb \
+	sun5i-a13-difrnce-dit4350.dtb \
+	sun5i-a13-empire-electronix-d709.dtb \
+	sun5i-a13-empire-electronix-m712.dtb \
+	sun5i-a13-hsg-h702.dtb \
+	sun5i-a13-inet-98v-rev2.dtb \
+	sun5i-a13-licheepi-one.dtb \
+	sun5i-a13-olinuxino.dtb \
+	sun5i-a13-olinuxino-micro.dtb \
+	sun5i-a13-pocketbook-touch-lux-3.dtb \
+	sun5i-a13-q8-tablet.dtb \
+	sun5i-a13-utoo-p66.dtb \
+	sun5i-gr8-chip-pro.dtb \
+	sun5i-gr8-evb.dtb \
+	sun5i-r8-chip.dtb
+dtb-$(CONFIG_MACH_SUN6I) += \
+	sun6i-a31-app4-evb1.dtb \
+	sun6i-a31-colombus.dtb \
+	sun6i-a31-hummingbird.dtb \
+	sun6i-a31-i7.dtb \
+	sun6i-a31-m9.dtb \
+	sun6i-a31-mele-a1000g-quad.dtb \
+	sun6i-a31s-colorfly-e708-q1.dtb \
+	sun6i-a31s-cs908.dtb \
+	sun6i-a31s-inet-q972.dtb \
+	sun6i-a31s-primo81.dtb \
+	sun6i-a31s-sina31s.dtb \
+	sun6i-a31s-sinovoip-bpi-m2.dtb \
+	sun6i-a31s-yones-toptech-bs1078-v2.dtb
+dtb-$(CONFIG_MACH_SUN6I) += \
+	sun6i-a31-app4-evb1.dtb \
+	sun6i-a31-colombus.dtb \
+	sun6i-a31-hummingbird.dtb \
+	sun6i-a31-i7.dtb \
+	sun6i-a31-m9.dtb \
+	sun6i-a31-mele-a1000g-quad.dtb \
+	sun6i-a31s-colorfly-e708-q1.dtb \
+	sun6i-a31s-cs908.dtb \
+	sun6i-a31s-inet-q972.dtb \
+	sun6i-a31s-primo81.dtb \
+	sun6i-a31s-sina31s.dtb \
+	sun6i-a31s-sinovoip-bpi-m2.dtb \
+	sun6i-a31s-yones-toptech-bs1078-v2.dtb
+dtb-$(CONFIG_MACH_SUN7I) += \
+	sun7i-a20-bananapi.dtb \
+	sun7i-a20-bananapi-m1-plus.dtb \
+	sun7i-a20-bananapro.dtb \
+	sun7i-a20-cubieboard2.dtb \
+	sun7i-a20-cubietruck.dtb \
+	sun7i-a20-haoyu-marsboard.dtb \
+	sun7i-a20-hummingbird.dtb \
+	sun7i-a20-itead-ibox.dtb \
+	sun7i-a20-i12-tvbox.dtb \
+	sun7i-a20-icnova-a20-adb4006.dtb \
+	sun7i-a20-icnova-swac.dtb \
+	sun7i-a20-lamobo-r1.dtb \
+	sun7i-a20-linutronix-testbox-v2.dtb \
+	sun7i-a20-m3.dtb \
+	sun7i-a20-mk808c.dtb \
+	sun7i-a20-olimex-som-evb.dtb \
+	sun7i-a20-olimex-som-evb-emmc.dtb \
+	sun7i-a20-olimex-som204-evb.dtb \
+	sun7i-a20-olimex-som204-evb-emmc.dtb \
+	sun7i-a20-olinuxino-lime.dtb \
+	sun7i-a20-olinuxino-lime-emmc.dtb \
+	sun7i-a20-olinuxino-lime2.dtb \
+	sun7i-a20-olinuxino-lime2-emmc.dtb \
+	sun7i-a20-olinuxino-micro.dtb \
+	sun7i-a20-olinuxino-micro-emmc.dtb \
+	sun7i-a20-orangepi.dtb \
+	sun7i-a20-orangepi-mini.dtb \
+	sun7i-a20-pcduino3.dtb \
+	sun7i-a20-pcduino3-nano.dtb \
+	sun7i-a20-wexler-tab7200.dtb \
+	sun7i-a20-wits-pro-a20-dkt.dtb
+dtb-$(CONFIG_MACH_SUN7I) += \
+	sun7i-a20-bananapi.dtb \
+	sun7i-a20-bananapi-m1-plus.dtb \
+	sun7i-a20-bananapro.dtb \
+	sun7i-a20-cubieboard2.dtb \
+	sun7i-a20-cubietruck.dtb \
+	sun7i-a20-haoyu-marsboard.dtb \
+	sun7i-a20-hummingbird.dtb \
+	sun7i-a20-itead-ibox.dtb \
+	sun7i-a20-i12-tvbox.dtb \
+	sun7i-a20-icnova-a20-adb4006.dtb \
+	sun7i-a20-icnova-swac.dtb \
+	sun7i-a20-lamobo-r1.dtb \
+	sun7i-a20-linutronix-testbox-v2.dtb \
+	sun7i-a20-m3.dtb \
+	sun7i-a20-mk808c.dtb \
+	sun7i-a20-olimex-som-evb.dtb \
+	sun7i-a20-olimex-som-evb-emmc.dtb \
+	sun7i-a20-olimex-som204-evb.dtb \
+	sun7i-a20-olimex-som204-evb-emmc.dtb \
+	sun7i-a20-olinuxino-lime.dtb \
+	sun7i-a20-olinuxino-lime-emmc.dtb \
+	sun7i-a20-olinuxino-lime2.dtb \
+	sun7i-a20-olinuxino-lime2-emmc.dtb \
+	sun7i-a20-olinuxino-micro.dtb \
+	sun7i-a20-olinuxino-micro-emmc.dtb \
+	sun7i-a20-orangepi.dtb \
+	sun7i-a20-orangepi-mini.dtb \
+	sun7i-a20-pcduino3.dtb \
+	sun7i-a20-pcduino3-nano.dtb \
+	sun7i-a20-wexler-tab7200.dtb \
+	sun7i-a20-wits-pro-a20-dkt.dtb
+
+# Enables support for device-tree overlays for all pis
+DTC_FLAGS_sun8i-h2-plus-orangepi-zero := -@
+DTC_FLAGS_sun8i-h3-orangepi-lite := -@
+DTC_FLAGS_sun8i-h3-bananapi-m2-plus := -@
+DTC_FLAGS_sun8i-h3-nanopi-m1-plus := -@
+DTC_FLAGS_sun8i-h3-nanopi-m1 := -@
+DTC_FLAGS_sun8i-h3-nanopi-duo2 := -@
+DTC_FLAGS_sun8i-h3-orangepi-plus2e := -@
+DTC_FLAGS_sun8i-h3-orangepi-one := -@
+DTC_FLAGS_sun8i-h3-orangepi-plus := -@
+DTC_FLAGS_sun8i-h3-orangepi-2 := -@
+DTC_FLAGS_sun8i-h3-orangepi-zero-plus2 := -@
+DTC_FLAGS_sun8i-h3-nanopi-neo-air := -@
+DTC_FLAGS_sun8i-h3-zeropi := -@
+DTC_FLAGS_sun8i-h3-nanopi-neo := -@
+DTC_FLAGS_sun8i-h3-nanopi-r1 := -@
+DTC_FLAGS_sun8i-h3-orangepi-pc := -@
+DTC_FLAGS_sun8i-h3-bananapi-m2-plus-v1.2 := -@
+DTC_FLAGS_sun8i-h3-orangepi-pc-plus := -@
+DTC_FLAGS_sun8i-t113s-netcube-nagami-basic-carrier := -@
+DTC_FLAGS_sun8i-v3s-netcube-kumquat := -@
+dtb-$(CONFIG_MACH_SUN8I) += \
+	sun8i-a23-evb.dtb \
+	sun8i-a23-gt90h-v4.dtb \
+	sun8i-a23-inet86dz.dtb \
+	sun8i-a23-ippo-q8h-v5.dtb \
+	sun8i-a23-ippo-q8h-v1.2.dtb \
+	sun8i-a23-polaroid-mid2407pxe03.dtb \
+	sun8i-a23-polaroid-mid2809pxe04.dtb \
+	sun8i-a23-q8-tablet.dtb \
+	sun8i-a33-et-q8-v1.6.dtb \
+	sun8i-a33-ga10h-v1.1.dtb \
+	sun8i-a33-inet-d978-rev2.dtb \
+	sun8i-a33-ippo-q8h-v1.2.dtb \
+	sun8i-a33-olinuxino.dtb \
+	sun8i-a33-q8-tablet.dtb \
+	sun8i-a33-sinlinx-sina33.dtb \
+	sun8i-a33-vstar.dtb \
+	sun8i-a83t-allwinner-h8homlet-v2.dtb \
+	sun8i-a83t-bananapi-m3.dtb \
+	sun8i-a83t-cubietruck-plus.dtb \
+	sun8i-a83t-tbs-a711.dtb \
+	sun8i-h2-plus-bananapi-m2-zero.dtb \
+	sun8i-h2-plus-libretech-all-h3-cc.dtb \
+	sun8i-h2-plus-orangepi-r1.dtb \
+	sun8i-h2-plus-orangepi-zero.dtb \
+	sun8i-h2-plus-orangepi-zero-interface-board.dtb \
+	sun8i-h3-bananapi-m2-plus.dtb \
+	sun8i-h3-bananapi-m2-plus-v1.2.dtb \
+	sun8i-h3-beelink-x2.dtb \
+	sun8i-h3-libretech-all-h3-cc.dtb \
+	sun8i-h3-mapleboard-mp130.dtb \
+	sun8i-h3-nanopi-duo2.dtb \
+	sun8i-h3-nanopi-m1.dtb \
+	sun8i-h3-nanopi-m1-plus.dtb \
+	sun8i-h3-nanopi-neo.dtb \
+	sun8i-h3-nanopi-neo-air.dtb \
+	sun8i-h3-nanopi-r1.dtb \
+	sun8i-h3-orangepi-2.dtb \
+	sun8i-h3-orangepi-lite.dtb \
+	sun8i-h3-orangepi-one.dtb \
+	sun8i-h3-orangepi-pc.dtb \
+	sun8i-h3-orangepi-pc-plus.dtb \
+	sun8i-h3-orangepi-plus.dtb \
+	sun8i-h3-orangepi-plus2e.dtb \
+	sun8i-h3-orangepi-zero-plus2.dtb \
+	sun8i-h3-orangepi-zero-plus2-interface-board.dtb \
+	sun8i-h3-rervision-dvk.dtb \
+	sun8i-h3-zeropi.dtb \
+	sun8i-h3-emlid-neutis-n5h3-devboard.dtb \
+	sun8i-r16-bananapi-m2m.dtb \
+	sun8i-r16-nintendo-nes-classic.dtb \
+	sun8i-r16-nintendo-super-nes-classic.dtb \
+	sun8i-r16-parrot.dtb \
+	sun8i-r40-bananapi-m2-ultra.dtb \
+	sun8i-r40-oka40i-c.dtb \
+	sun8i-s3-elimo-initium.dtb \
+	sun8i-s3-lichee-zero-plus.dtb \
+	sun8i-s3-pinecube.dtb \
+	sun8i-t113s-mangopi-mq-r-t113.dtb \
+	sun8i-t113s-netcube-nagami-basic-carrier.dtb \
+	sun8i-t113s-netcube-nagami-keypad-carrier.dtb \
+	sun8i-t3-cqa3t-bv3.dtb \
+	sun8i-v3-sl631-imx179.dtb \
+	sun8i-v3s-anbernic-rg-nano.dtb \
+	sun8i-v3s-licheepi-zero.dtb \
+	sun8i-v3s-licheepi-zero-dock.dtb \
+	sun8i-v3s-netcube-kumquat.dtb \
+	sun8i-v40-bananapi-m2-berry.dtb
+sun8i-h2-plus-orangepi-zero-interface-board-dtbs += \
+	sun8i-h2-plus-orangepi-zero.dtb sun8i-orangepi-zero-interface-board.dtbo
+sun8i-h3-orangepi-zero-plus2-interface-board-dtbs += \
+	sun8i-h3-orangepi-zero-plus2.dtb sun8i-orangepi-zero-interface-board.dtbo
+dtb-$(CONFIG_MACH_SUN9I) += \
+	sun9i-a80-optimus.dtb \
+	sun9i-a80-cubieboard4.dtb
+dtb-$(CONFIG_MACH_SUNIV) += \
+	suniv-f1c100s-licheepi-nano.dtb \
+	suniv-f1c200s-lctech-pi.dtb \
+	suniv-f1c200s-popstick-v1.1.dtb
diff --git a/arch/arm/boot/dts/axp152.dtsi b/arch/arm/boot/dts/allwinner/axp152.dtsi
index f90ad6c64a07..f90ad6c64a07 100644
--- a/arch/arm/boot/dts/axp152.dtsi
+++ b/arch/arm/boot/dts/allwinner/axp152.dtsi
diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/allwinner/axp209.dtsi
index 0d9ff12bdf28..469d0f7d5185 100644
--- a/arch/arm/boot/dts/axp209.dtsi
+++ b/arch/arm/boot/dts/allwinner/axp209.dtsi
@@ -48,12 +48,19 @@
  * http://dl.linux-sunxi.org/AXP/AXP209%20Datasheet%20v1.0_cn.pdf
  */
 
+/ {
+	pmic-temp {
+		compatible = "iio-hwmon";
+		io-channels = <&axp_adc 4>; /* Internal temperature */
+	};
+};
+
 &axp209 {
 	compatible = "x-powers,axp209";
 	interrupt-controller;
 	#interrupt-cells = <1>;
 
-	ac_power_supply: ac-power-supply {
+	ac_power_supply: ac-power {
 		compatible = "x-powers,axp202-ac-power-supply";
 		status = "disabled";
 	};
@@ -69,7 +76,7 @@
 		#gpio-cells = <2>;
 	};
 
-	battery_power_supply: battery-power-supply {
+	battery_power_supply: battery-power {
 		compatible = "x-powers,axp209-battery-power-supply";
 		status = "disabled";
 	};
@@ -112,7 +119,7 @@
 		};
 	};
 
-	usb_power_supply: usb-power-supply {
+	usb_power_supply: usb-power {
 		compatible = "x-powers,axp202-usb-power-supply";
 		status = "disabled";
 	};
diff --git a/arch/arm/boot/dts/axp223.dtsi b/arch/arm/boot/dts/allwinner/axp223.dtsi
index b91b6c1278c7..b91b6c1278c7 100644
--- a/arch/arm/boot/dts/axp223.dtsi
+++ b/arch/arm/boot/dts/allwinner/axp223.dtsi
diff --git a/arch/arm/boot/dts/axp22x.dtsi b/arch/arm/boot/dts/allwinner/axp22x.dtsi
index 65a07a67aca9..f79650afd0a7 100644
--- a/arch/arm/boot/dts/axp22x.dtsi
+++ b/arch/arm/boot/dts/allwinner/axp22x.dtsi
@@ -52,7 +52,7 @@
 	interrupt-controller;
 	#interrupt-cells = <1>;
 
-	ac_power_supply: ac-power-supply {
+	ac_power_supply: ac-power {
 		compatible = "x-powers,axp221-ac-power-supply";
 		status = "disabled";
 	};
@@ -62,11 +62,17 @@
 		#io-channel-cells = <1>;
 	};
 
-	battery_power_supply: battery-power-supply {
+	battery_power_supply: battery-power {
 		compatible = "x-powers,axp221-battery-power-supply";
 		status = "disabled";
 	};
 
+	axp_gpio: gpio {
+		compatible = "x-powers,axp221-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
 	regulators {
 		/* Default work frequency for buck regulators */
 		x-powers,dcdc-freq = <3000>;
@@ -163,7 +169,7 @@
 		};
 	};
 
-	usb_power_supply: usb_power_supply {
+	usb_power_supply: usb-power {
 		compatible = "x-powers,axp221-usb-power-supply";
 		status = "disabled";
 	};
diff --git a/arch/arm/boot/dts/axp809.dtsi b/arch/arm/boot/dts/allwinner/axp809.dtsi
index ab8e5f2d9246..d134d4c00bd8 100644
--- a/arch/arm/boot/dts/axp809.dtsi
+++ b/arch/arm/boot/dts/allwinner/axp809.dtsi
@@ -50,4 +50,11 @@
 	compatible = "x-powers,axp809";
 	interrupt-controller;
 	#interrupt-cells = <1>;
+
+	axp_gpio: gpio {
+		compatible = "x-powers,axp809-gpio",
+			     "x-powers,axp221-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
 };
diff --git a/arch/arm/boot/dts/axp81x.dtsi b/arch/arm/boot/dts/allwinner/axp81x.dtsi
index 1dfeeceabf4c..ebaf1c3ce8db 100644
--- a/arch/arm/boot/dts/axp81x.dtsi
+++ b/arch/arm/boot/dts/allwinner/axp81x.dtsi
@@ -48,7 +48,7 @@
 	interrupt-controller;
 	#interrupt-cells = <1>;
 
-	ac_power_supply: ac-power-supply {
+	ac_power_supply: ac-power {
 		compatible = "x-powers,axp813-ac-power-supply";
 		status = "disabled";
 	};
@@ -62,19 +62,9 @@
 		compatible = "x-powers,axp813-gpio";
 		gpio-controller;
 		#gpio-cells = <2>;
-
-		gpio0_ldo: gpio0-ldo {
-			pins = "GPIO0";
-			function = "ldo";
-		};
-
-		gpio1_ldo: gpio1-ldo {
-			pins = "GPIO1";
-			function = "ldo";
-		};
 	};
 
-	battery_power_supply: battery-power-supply {
+	battery_power_supply: battery-power {
 		compatible = "x-powers,axp813-battery-power-supply";
 		status = "disabled";
 	};
@@ -144,15 +134,11 @@
 		};
 
 		reg_ldo_io0: ldo-io0 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gpio0_ldo>;
 			/* Disable by default to avoid conflicts with GPIO */
 			status = "disabled";
 		};
 
 		reg_ldo_io1: ldo-io1 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gpio1_ldo>;
 			/* Disable by default to avoid conflicts with GPIO */
 			status = "disabled";
 		};
@@ -172,7 +158,7 @@
 		};
 	};
 
-	usb_power_supply: usb-power-supply {
+	usb_power_supply: usb-power {
 		compatible = "x-powers,axp813-usb-power-supply";
 	};
 };
diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-a1000.dts
index 20f9ed244851..20f9ed244851 100644
--- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-a1000.dts
diff --git a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-ba10-tvbox.dts
index 816d534ac093..816d534ac093 100644
--- a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-ba10-tvbox.dts
diff --git a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-chuwi-v7-cw0825.dts
index 74262988881c..74262988881c 100644
--- a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-chuwi-v7-cw0825.dts
diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-cubieboard.dts
index 0645d6064235..0645d6064235 100644
--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-cubieboard.dts
diff --git a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-dserve-dsrv9703c.dts
index 63e77c05bfda..63e77c05bfda 100644
--- a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-dserve-dsrv9703c.dts
diff --git a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-gemei-g9.dts
index ea7a59dcf8f9..ea7a59dcf8f9 100644
--- a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-gemei-g9.dts
diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-hackberry.dts
index 47dea0922501..47dea0922501 100644
--- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-hackberry.dts
diff --git a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-hyundai-a7hd.dts
index bf2044bac42f..bf2044bac42f 100644
--- a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-hyundai-a7hd.dts
diff --git a/arch/arm/boot/dts/sun4i-a10-inet1.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-inet1.dts
index 60e432a0ef1c..60e432a0ef1c 100644
--- a/arch/arm/boot/dts/sun4i-a10-inet1.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-inet1.dts
diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-inet97fv2.dts
index 76016f2ca29d..76016f2ca29d 100644
--- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-inet97fv2.dts
diff --git a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-inet9f-rev03.dts
index 0a562b2cc5bc..62e7aa587f89 100644
--- a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-inet9f-rev03.dts
@@ -63,7 +63,7 @@
 		compatible = "gpio-keys-polled";
 		poll-interval = <20>;
 
-		left-joystick-left {
+		event-left-joystick-left {
 			label = "Left Joystick Left";
 			linux,code = <ABS_X>;
 			linux,input-type = <EV_ABS>;
@@ -71,7 +71,7 @@
 			gpios = <&pio 0 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA6 */
 		};
 
-		left-joystick-right {
+		event-left-joystick-right {
 			label = "Left Joystick Right";
 			linux,code = <ABS_X>;
 			linux,input-type = <EV_ABS>;
@@ -79,7 +79,7 @@
 			gpios = <&pio 0 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA5 */
 		};
 
-		left-joystick-up {
+		event-left-joystick-up {
 			label = "Left Joystick Up";
 			linux,code = <ABS_Y>;
 			linux,input-type = <EV_ABS>;
@@ -87,7 +87,7 @@
 			gpios = <&pio 0 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA8 */
 		};
 
-		left-joystick-down {
+		event-left-joystick-down {
 			label = "Left Joystick Down";
 			linux,code = <ABS_Y>;
 			linux,input-type = <EV_ABS>;
@@ -95,7 +95,7 @@
 			gpios = <&pio 0 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA9 */
 		};
 
-		right-joystick-left {
+		event-right-joystick-left {
 			label = "Right Joystick Left";
 			linux,code = <ABS_Z>;
 			linux,input-type = <EV_ABS>;
@@ -103,7 +103,7 @@
 			gpios = <&pio 0 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA1 */
 		};
 
-		right-joystick-right {
+		event-right-joystick-right {
 			label = "Right Joystick Right";
 			linux,code = <ABS_Z>;
 			linux,input-type = <EV_ABS>;
@@ -111,7 +111,7 @@
 			gpios = <&pio 0 0 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA0 */
 		};
 
-		right-joystick-up {
+		event-right-joystick-up {
 			label = "Right Joystick Up";
 			linux,code = <ABS_RZ>;
 			linux,input-type = <EV_ABS>;
@@ -119,7 +119,7 @@
 			gpios = <&pio 0 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA3 */
 		};
 
-		right-joystick-down {
+		event-right-joystick-down {
 			label = "Right Joystick Down";
 			linux,code = <ABS_RZ>;
 			linux,input-type = <EV_ABS>;
@@ -127,7 +127,7 @@
 			gpios = <&pio 0 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA4 */
 		};
 
-		dpad-left {
+		event-dpad-left {
 			label = "DPad Left";
 			linux,code = <ABS_HAT0X>;
 			linux,input-type = <EV_ABS>;
@@ -135,7 +135,7 @@
 			gpios = <&pio 7 23 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH23 */
 		};
 
-		dpad-right {
+		event-dpad-right {
 			label = "DPad Right";
 			linux,code = <ABS_HAT0X>;
 			linux,input-type = <EV_ABS>;
@@ -143,7 +143,7 @@
 			gpios = <&pio 7 24 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH24 */
 		};
 
-		dpad-up {
+		event-dpad-up {
 			label = "DPad Up";
 			linux,code = <ABS_HAT0Y>;
 			linux,input-type = <EV_ABS>;
@@ -151,7 +151,7 @@
 			gpios = <&pio 7 25 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH25 */
 		};
 
-		dpad-down {
+		event-dpad-down {
 			label = "DPad Down";
 			linux,code = <ABS_HAT0Y>;
 			linux,input-type = <EV_ABS>;
@@ -159,49 +159,49 @@
 			gpios = <&pio 7 26 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH26 */
 		};
 
-		x {
+		event-x {
 			label = "Button X";
 			linux,code = <BTN_X>;
 			gpios = <&pio 0 16 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA16 */
 		};
 
-		y {
+		event-y {
 			label = "Button Y";
 			linux,code = <BTN_Y>;
 			gpios = <&pio 0 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA14 */
 		};
 
-		a {
+		event-a {
 			label = "Button A";
 			linux,code = <BTN_A>;
 			gpios = <&pio 0 17 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA17 */
 		};
 
-		b {
+		event-b {
 			label = "Button B";
 			linux,code = <BTN_B>;
 			gpios = <&pio 0 15 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA15 */
 		};
 
-		select {
+		event-select {
 			label = "Select Button";
 			linux,code = <BTN_SELECT>;
 			gpios = <&pio 0 11 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA11 */
 		};
 
-		start {
+		event-start {
 			label = "Start Button";
 			linux,code = <BTN_START>;
 			gpios = <&pio 0 12 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA12 */
 		};
 
-		top-left {
+		event-top-left {
 			label = "Top Left Button";
 			linux,code = <BTN_TL>;
 			gpios = <&pio 7 22 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH22 */
 		};
 
-		top-right {
+		event-top-right {
 			label = "Top Right Button";
 			linux,code = <BTN_TR>;
 			gpios = <&pio 0 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA13 */
diff --git a/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-itead-iteaduino-plus.dts
index d4e319d16aae..d4e319d16aae 100644
--- a/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-itead-iteaduino-plus.dts
diff --git a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-jesurun-q5.dts
index 1aeb0bd5519e..1aeb0bd5519e 100644
--- a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-jesurun-q5.dts
diff --git a/arch/arm/boot/dts/sun4i-a10-marsboard.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-marsboard.dts
index 81fdb217d339..81fdb217d339 100644
--- a/arch/arm/boot/dts/sun4i-a10-marsboard.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-marsboard.dts
diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-mini-xplus.dts
index f9d74e21031d..f9d74e21031d 100644
--- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-mini-xplus.dts
diff --git a/arch/arm/boot/dts/sun4i-a10-mk802.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-mk802.dts
index 059fe9c5d024..059fe9c5d024 100644
--- a/arch/arm/boot/dts/sun4i-a10-mk802.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-mk802.dts
diff --git a/arch/arm/boot/dts/sun4i-a10-mk802ii.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-mk802ii.dts
index 17dcdf031118..17dcdf031118 100644
--- a/arch/arm/boot/dts/sun4i-a10-mk802ii.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-mk802ii.dts
diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-olinuxino-lime.dts
index ad0e25af45be..d425d9ee83db 100644
--- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-olinuxino-lime.dts
@@ -91,12 +91,11 @@
 	/*
 	 * The A10-Lime is known to be unstable when running at 1008 MHz
 	 */
-	operating-points = <
-		/* kHz    uV */
-		912000  1350000
-		864000  1300000
-		624000  1250000
-		>;
+	operating-points =
+		/* kHz	  uV */
+		<912000	1350000>,
+		<864000	1300000>,
+		<624000	1250000>;
 };
 
 &de {
@@ -219,7 +218,7 @@
 &usbphy {
 	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
 	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH5 */
-	usb0_vbus-supply   = <&reg_usb0_vbus>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-pcduino.dts
index 1ac82376baef..a332d61fd561 100644
--- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-pcduino.dts
@@ -77,19 +77,19 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		back {
+		key-back {
 			label = "Key Back";
 			linux,code = <KEY_BACK>;
 			gpios = <&pio 7 17 GPIO_ACTIVE_LOW>;
 		};
 
-		home {
+		key-home {
 			label = "Key Home";
 			linux,code = <KEY_HOME>;
 			gpios = <&pio 7 18 GPIO_ACTIVE_LOW>;
 		};
 
-		menu {
+		key-menu {
 			label = "Key Menu";
 			linux,code = <KEY_MENU>;
 			gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino2.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-pcduino2.dts
index bc4f128965ed..bc4f128965ed 100644
--- a/arch/arm/boot/dts/sun4i-a10-pcduino2.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-pcduino2.dts
diff --git a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-pov-protab2-ips9.dts
index c32596947647..c32596947647 100644
--- a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-pov-protab2-ips9.dts
diff --git a/arch/arm/boot/dts/sun4i-a10-topwise-a721.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-topwise-a721.dts
index 3628f12d2521..3628f12d2521 100644
--- a/arch/arm/boot/dts/sun4i-a10-topwise-a721.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-topwise-a721.dts
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/allwinner/sun4i-a10.dtsi
index 1c5a666c54b5..51a6464aab9a 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10.dtsi
@@ -115,13 +115,12 @@
 			reg = <0x0>;
 			clocks = <&ccu CLK_CPU>;
 			clock-latency = <244144>; /* 8 32k periods */
-			operating-points = <
+			operating-points =
 				/* kHz	  uV */
-				1008000 1400000
-				912000	1350000
-				864000	1300000
-				624000	1250000
-				>;
+				<1008000 1400000>,
+				<912000	1350000>,
+				<864000	1300000>,
+				<624000	1250000>;
 			#cooling-cells = <2>;
 		};
 	};
diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts b/arch/arm/boot/dts/allwinner/sun5i-a10s-auxtek-t003.dts
index 04b0e6d28769..04b0e6d28769 100644
--- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a10s-auxtek-t003.dts
diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts b/arch/arm/boot/dts/allwinner/sun5i-a10s-auxtek-t004.dts
index 667bc2dc1ea9..667bc2dc1ea9 100644
--- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a10s-auxtek-t004.dts
diff --git a/arch/arm/boot/dts/sun5i-a10s-mk802.dts b/arch/arm/boot/dts/allwinner/sun5i-a10s-mk802.dts
index d0219404c231..d0219404c231 100644
--- a/arch/arm/boot/dts/sun5i-a10s-mk802.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a10s-mk802.dts
diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/allwinner/sun5i-a10s-olinuxino-micro.dts
index 5832bb31fc51..5832bb31fc51 100644
--- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a10s-olinuxino-micro.dts
diff --git a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts b/arch/arm/boot/dts/allwinner/sun5i-a10s-r7-tv-dongle.dts
index 964360f0610a..964360f0610a 100644
--- a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a10s-r7-tv-dongle.dts
diff --git a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts b/arch/arm/boot/dts/allwinner/sun5i-a10s-wobo-i5.dts
index ef8baa992687..ef8baa992687 100644
--- a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a10s-wobo-i5.dts
diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/allwinner/sun5i-a10s.dtsi
index 09c486b608b2..09c486b608b2 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun5i-a10s.dtsi
diff --git a/arch/arm/boot/dts/sun5i-a13-difrnce-dit4350.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-difrnce-dit4350.dts
index 894c4c4f9a1f..894c4c4f9a1f 100644
--- a/arch/arm/boot/dts/sun5i-a13-difrnce-dit4350.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-difrnce-dit4350.dts
diff --git a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-empire-electronix-d709.dts
index d059388d7252..d059388d7252 100644
--- a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-empire-electronix-d709.dts
diff --git a/arch/arm/boot/dts/sun5i-a13-empire-electronix-m712.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-empire-electronix-m712.dts
index b1e2afd9de52..b1e2afd9de52 100644
--- a/arch/arm/boot/dts/sun5i-a13-empire-electronix-m712.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-empire-electronix-m712.dts
diff --git a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-hsg-h702.dts
index 9b9f2a574851..9b9f2a574851 100644
--- a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-hsg-h702.dts
diff --git a/arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-inet-98v-rev2.dts
index 439ae3b537df..439ae3b537df 100644
--- a/arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-inet-98v-rev2.dts
diff --git a/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-licheepi-one.dts
index 2ce361f8fede..3a6c4bd0a44f 100644
--- a/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-licheepi-one.dts
@@ -67,18 +67,18 @@
 		compatible = "gpio-leds";
 
 		led-0 {
-			label ="licheepi:red:usr";
+			label = "licheepi:red:usr";
 			gpios = <&pio 2 5 GPIO_ACTIVE_LOW>;
 		};
 
 		led-1 {
-			label ="licheepi:green:usr";
+			label = "licheepi:green:usr";
 			gpios = <&pio 2 19 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 		};
 
 		led-2 {
-			label ="licheepi:blue:usr";
+			label = "licheepi:blue:usr";
 			gpios = <&pio 2 4 GPIO_ACTIVE_LOW>;
 		};
 
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-olinuxino-micro.dts
index bfe1075e62cc..bfe1075e62cc 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-olinuxino-micro.dts
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-olinuxino.dts
index fadeae3cd8bb..fadeae3cd8bb 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-olinuxino.dts
diff --git a/arch/arm/boot/dts/allwinner/sun5i-a13-pocketbook-614-plus.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-pocketbook-614-plus.dts
new file mode 100644
index 000000000000..ab8d138dc11d
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-pocketbook-614-plus.dts
@@ -0,0 +1,218 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2024 Denis Burkov <hitechshell@mail.ru>
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "PocketBook 614 Plus";
+	compatible = "pocketbook,614-plus", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_POWER;
+			linux,default-trigger = "default-on";
+			gpios = <&pio 4 8 GPIO_ACTIVE_LOW>; /* PE8 */
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-0 {
+			label = "Right";
+			linux,code = <KEY_NEXT>;
+			gpios = <&pio 6 9 GPIO_ACTIVE_LOW>; /* PG9 */
+		};
+
+		key-1 {
+			label = "Left";
+			linux,code = <KEY_PREVIOUS>;
+			gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 */
+		};
+	};
+
+	reg_3v3_mmc0: regulator-mmc0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-mmc0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 4 4 GPIO_ACTIVE_LOW>; /* PE4 */
+		vin-supply = <&reg_vcc3v3>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	status = "okay";
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-300 {
+		label = "Down";
+		linux,code = <KEY_DOWN>;
+		channel = <0>;
+		voltage = <300000>;
+	};
+
+	button-700 {
+		label = "Up";
+		linux,code = <KEY_UP>;
+		channel = <0>;
+		voltage = <700000>;
+	};
+
+	button-1000 {
+		label = "Left";
+		linux,code = <KEY_LEFT>;
+		channel = <0>;
+		voltage = <1000000>;
+	};
+
+	button-1200 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <1200000>;
+	};
+
+	button-1500 {
+		label = "Right";
+		linux,code = <KEY_RIGHT>;
+		channel = <0>;
+		voltage = <1500000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_3v3_mmc0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_4bit_pc_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_det-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun5i-a13-pocketbook-touch-lux-3.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-pocketbook-touch-lux-3.dts
index d60407772e5d..d60407772e5d 100644
--- a/arch/arm/boot/dts/sun5i-a13-pocketbook-touch-lux-3.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-pocketbook-touch-lux-3.dts
diff --git a/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-q8-tablet.dts
index f9fc1c8b60b8..f9fc1c8b60b8 100644
--- a/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-q8-tablet.dts
diff --git a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-utoo-p66.dts
index be486d28d04f..be486d28d04f 100644
--- a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-utoo-p66.dts
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/allwinner/sun5i-a13.dtsi
index 7075e10911d5..2c9152b151be 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13.dtsi
@@ -62,14 +62,14 @@
 			};
 
 			trips {
-				cpu_alert0: cpu_alert0 {
+				cpu_alert0: cpu-alert0 {
 					/* milliCelsius */
 					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit: cpu_crit {
+				cpu_crit: cpu-crit {
 					/* milliCelsius */
 					temperature = <100000>;
 					hysteresis = <2000>;
@@ -102,15 +102,14 @@
 
 &cpu0 {
 	clock-latency = <244144>; /* 8 32k periods */
-	operating-points = <
+	operating-points =
 		/* kHz	  uV */
-		1008000 1400000
-		912000	1350000
-		864000	1300000
-		624000	1200000
-		576000	1200000
-		432000	1200000
-		>;
+		<1008000 1400000>,
+		<912000 1350000>,
+		<864000 1300000>,
+		<624000 1200000>,
+		<576000 1200000>,
+		<432000 1200000>;
 	#cooling-cells = <2>;
 };
 
diff --git a/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts b/arch/arm/boot/dts/allwinner/sun5i-gr8-chip-pro.dts
index a32cde3e32eb..ffbd99c176db 100644
--- a/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-gr8-chip-pro.dts
@@ -70,14 +70,14 @@
 	leds {
 		compatible = "gpio-leds";
 
-		status {
+		led-0 {
 			label = "chip-pro:white:status";
 			gpios = <&axp_gpio 2 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 	};
 
-	mmc0_pwrseq: mmc0_pwrseq {
+	mmc0_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; /* PB10 */
 	};
diff --git a/arch/arm/boot/dts/sun5i-gr8-evb.dts b/arch/arm/boot/dts/allwinner/sun5i-gr8-evb.dts
index f4fe258ef06d..f4fe258ef06d 100644
--- a/arch/arm/boot/dts/sun5i-gr8-evb.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-gr8-evb.dts
diff --git a/arch/arm/boot/dts/sun5i-gr8.dtsi b/arch/arm/boot/dts/allwinner/sun5i-gr8.dtsi
index 98a8fd5e89e8..98a8fd5e89e8 100644
--- a/arch/arm/boot/dts/sun5i-gr8.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun5i-gr8.dtsi
diff --git a/arch/arm/boot/dts/sun5i-r8-chip.dts b/arch/arm/boot/dts/allwinner/sun5i-r8-chip.dts
index 4bf4943d4eb7..8c784a2c086e 100644
--- a/arch/arm/boot/dts/sun5i-r8-chip.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-r8-chip.dts
@@ -70,14 +70,14 @@
 	leds {
 		compatible = "gpio-leds";
 
-		status {
+		led-0 {
 			label = "chip:white:status";
 			gpios = <&axp_gpio 2 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 	};
 
-	mmc0_pwrseq: mmc0_pwrseq {
+	mmc0_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 2 19 GPIO_ACTIVE_LOW>; /* PC19 */
 	};
@@ -255,6 +255,12 @@
 	pinctrl-0 = <&uart3_pg_pins>,
 		    <&uart3_cts_rts_pg_pins>;
 	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8723bs-bt";
+		device-wake-gpios = <&axp_gpio 3 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+	};
 };
 
 &usb_otg {
diff --git a/arch/arm/boot/dts/sun5i-r8.dtsi b/arch/arm/boot/dts/allwinner/sun5i-r8.dtsi
index de35dbcd1191..de35dbcd1191 100644
--- a/arch/arm/boot/dts/sun5i-r8.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun5i-r8.dtsi
diff --git a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi b/arch/arm/boot/dts/allwinner/sun5i-reference-design-tablet.dtsi
index 6847f66699ac..6847f66699ac 100644
--- a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun5i-reference-design-tablet.dtsi
diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/allwinner/sun5i.dtsi
index 250d6b87ab4d..d7c7b454a11a 100644
--- a/arch/arm/boot/dts/sun5i.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun5i.dtsi
@@ -286,7 +286,7 @@
 			clock-names = "ahb",
 				      "tcon-ch0",
 				      "tcon-ch1";
-			clock-output-names = "tcon-pixel-clock";
+			clock-output-names = "tcon-data-clock";
 			#clock-cells = <0>;
 			status = "disabled";
 
@@ -517,6 +517,15 @@
 				bias-pull-up;
 			};
 
+			/omit-if-no-ref/
+			mmc2_4bit_pe_pins: mmc2-4bit-pe-pins {
+				pins = "PE4", "PE5", "PE6", "PE7",
+				       "PE8", "PE9";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
 			mmc2_8bit_pins: mmc2-8bit-pins {
 				pins = "PC6", "PC7", "PC8", "PC9",
 				       "PC10", "PC11", "PC12", "PC13",
diff --git a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts b/arch/arm/boot/dts/allwinner/sun6i-a31-app4-evb1.dts
index 32d22025ac99..32d22025ac99 100644
--- a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31-app4-evb1.dts
diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/allwinner/sun6i-a31-colombus.dts
index 93a15eaaa8cb..93a15eaaa8cb 100644
--- a/arch/arm/boot/dts/sun6i-a31-colombus.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31-colombus.dts
diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/allwinner/sun6i-a31-hummingbird.dts
index 236ebfc06192..5bce7a32651e 100644
--- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31-hummingbird.dts
@@ -109,7 +109,7 @@
 		};
 	};
 
-	reg_vga_3v3: vga_3v3_regulator {
+	reg_vga_3v3: vga-3v3-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vga-3v3";
 		regulator-min-microvolt = <3300000>;
@@ -119,7 +119,7 @@
 		gpio = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 */
 	};
diff --git a/arch/arm/boot/dts/sun6i-a31-i7.dts b/arch/arm/boot/dts/allwinner/sun6i-a31-i7.dts
index 744723d956f0..744723d956f0 100644
--- a/arch/arm/boot/dts/sun6i-a31-i7.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31-i7.dts
diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/allwinner/sun6i-a31-m9.dts
index 7d2eaaf5c33e..7d2eaaf5c33e 100644
--- a/arch/arm/boot/dts/sun6i-a31-m9.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31-m9.dts
diff --git a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts b/arch/arm/boot/dts/allwinner/sun6i-a31-mele-a1000g-quad.dts
index 83611434270c..83611434270c 100644
--- a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31-mele-a1000g-quad.dts
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/allwinner/sun6i-a31.dtsi
index a31f9072bf79..f0145d6b9c53 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31.dtsi
@@ -46,6 +46,7 @@
 #include <dt-bindings/thermal/thermal.h>
 
 #include <dt-bindings/clock/sun6i-a31-ccu.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
 #include <dt-bindings/reset/sun6i-a31-ccu.h>
 
 / {
@@ -105,13 +106,12 @@
 			reg = <0>;
 			clocks = <&ccu CLK_CPU>;
 			clock-latency = <244144>; /* 8 32k periods */
-			operating-points = <
+			operating-points =
 				/* kHz	  uV */
-				1008000	1200000
-				864000	1200000
-				720000	1100000
-				480000	1000000
-				>;
+				<1008000 1200000>,
+				<864000 1200000>,
+				<720000 1100000>,
+				<480000 1000000>;
 			#cooling-cells = <2>;
 		};
 
@@ -121,13 +121,12 @@
 			reg = <1>;
 			clocks = <&ccu CLK_CPU>;
 			clock-latency = <244144>; /* 8 32k periods */
-			operating-points = <
+			operating-points =
 				/* kHz	  uV */
-				1008000	1200000
-				864000	1200000
-				720000	1100000
-				480000	1000000
-				>;
+				<1008000 1200000>,
+				<864000 1200000>,
+				<720000 1100000>,
+				<480000 1000000>;
 			#cooling-cells = <2>;
 		};
 
@@ -137,13 +136,12 @@
 			reg = <2>;
 			clocks = <&ccu CLK_CPU>;
 			clock-latency = <244144>; /* 8 32k periods */
-			operating-points = <
+			operating-points =
 				/* kHz	  uV */
-				1008000	1200000
-				864000	1200000
-				720000	1100000
-				480000	1000000
-				>;
+				<1008000 1200000>,
+				<864000 1200000>,
+				<720000 1100000>,
+				<480000 1000000>;
 			#cooling-cells = <2>;
 		};
 
@@ -153,13 +151,12 @@
 			reg = <3>;
 			clocks = <&ccu CLK_CPU>;
 			clock-latency = <244144>; /* 8 32k periods */
-			operating-points = <
+			operating-points =
 				/* kHz	  uV */
-				1008000	1200000
-				864000	1200000
-				720000	1100000
-				480000	1000000
-				>;
+				<1008000 1200000>,
+				<864000 1200000>,
+				<720000 1100000>,
+				<480000 1000000>;
 			#cooling-cells = <2>;
 		};
 	};
@@ -182,14 +179,14 @@
 			};
 
 			trips {
-				cpu_alert0: cpu_alert0 {
+				cpu_alert0: cpu-alert0 {
 					/* milliCelsius */
 					temperature = <70000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit: cpu_crit {
+				cpu_crit: cpu-crit {
 					/* milliCelsius */
 					temperature = <100000>;
 					hysteresis = <2000>;
@@ -602,7 +599,7 @@
 		ccu: clock@1c20000 {
 			compatible = "allwinner,sun6i-a31-ccu";
 			reg = <0x01c20000 0x400>;
-			clocks = <&osc24M>, <&rtc 0>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
 			clock-names = "hosc", "losc";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -616,7 +613,8 @@
 				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_APB1_PIO>, <&osc24M>, <&rtc 0>;
+			clocks = <&ccu CLK_APB1_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
@@ -824,7 +822,7 @@
 			clocks = <&ccu CLK_APB2_UART0>;
 			resets = <&ccu RST_APB2_UART0>;
 			dmas = <&dma 6>, <&dma 6>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -837,7 +835,7 @@
 			clocks = <&ccu CLK_APB2_UART1>;
 			resets = <&ccu RST_APB2_UART1>;
 			dmas = <&dma 7>, <&dma 7>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -850,7 +848,7 @@
 			clocks = <&ccu CLK_APB2_UART2>;
 			resets = <&ccu RST_APB2_UART2>;
 			dmas = <&dma 8>, <&dma 8>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -863,7 +861,7 @@
 			clocks = <&ccu CLK_APB2_UART3>;
 			resets = <&ccu RST_APB2_UART3>;
 			dmas = <&dma 9>, <&dma 9>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -876,7 +874,7 @@
 			clocks = <&ccu CLK_APB2_UART4>;
 			resets = <&ccu RST_APB2_UART4>;
 			dmas = <&dma 10>, <&dma 10>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -889,7 +887,7 @@
 			clocks = <&ccu CLK_APB2_UART5>;
 			resets = <&ccu RST_APB2_UART5>;
 			dmas = <&dma 22>, <&dma 22>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -1320,16 +1318,16 @@
 			compatible = "allwinner,sun6i-a31-prcm";
 			reg = <0x01f01400 0x200>;
 
-			ar100: ar100_clk {
+			ar100: ar100-clk {
 				compatible = "allwinner,sun6i-a31-ar100-clk";
 				#clock-cells = <0>;
-				clocks = <&rtc 0>, <&osc24M>,
+				clocks = <&rtc CLK_OSC32K>, <&osc24M>,
 					 <&ccu CLK_PLL_PERIPH>,
 					 <&ccu CLK_PLL_PERIPH>;
 				clock-output-names = "ar100";
 			};
 
-			ahb0: ahb0_clk {
+			ahb0: ahb0-clk {
 				compatible = "fixed-factor-clock";
 				#clock-cells = <0>;
 				clock-div = <1>;
@@ -1338,14 +1336,14 @@
 				clock-output-names = "ahb0";
 			};
 
-			apb0: apb0_clk {
+			apb0: apb0-clk {
 				compatible = "allwinner,sun6i-a31-apb0-clk";
 				#clock-cells = <0>;
 				clocks = <&ahb0>;
 				clock-output-names = "apb0";
 			};
 
-			apb0_gates: apb0_gates_clk {
+			apb0_gates: apb0-gates-clk {
 				compatible = "allwinner,sun6i-a31-apb0-gates-clk";
 				#clock-cells = <1>;
 				clocks = <&apb0>;
@@ -1355,14 +1353,14 @@
 						"apb0_i2c";
 			};
 
-			ir_clk: ir_clk {
+			ir_clk: ir-clk {
 				#clock-cells = <0>;
 				compatible = "allwinner,sun4i-a10-mod0-clk";
-				clocks = <&rtc 0>, <&osc24M>;
+				clocks = <&rtc CLK_OSC32K>, <&osc24M>;
 				clock-output-names = "ir";
 			};
 
-			apb0_rst: apb0_rst {
+			apb0_rst: apb0-rst {
 				compatible = "allwinner,sun6i-a31-clock-reset";
 				#reset-cells = <1>;
 			};
@@ -1389,9 +1387,8 @@
 			interrupt-parent = <&r_intc>;
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb0_gates 0>, <&osc24M>, <&rtc 0>;
+			clocks = <&apb0_gates 0>, <&osc24M>, <&rtc CLK_OSC32K>;
 			clock-names = "apb", "hosc", "losc";
-			resets = <&apb0_rst 0>;
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;
diff --git a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts b/arch/arm/boot/dts/allwinner/sun6i-a31s-colorfly-e708-q1.dts
index a2ef7846e2c8..a2ef7846e2c8 100644
--- a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-colorfly-e708-q1.dts
diff --git a/arch/arm/boot/dts/sun6i-a31s-cs908.dts b/arch/arm/boot/dts/allwinner/sun6i-a31s-cs908.dts
index 1d15e15011c6..1d15e15011c6 100644
--- a/arch/arm/boot/dts/sun6i-a31s-cs908.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-cs908.dts
diff --git a/arch/arm/boot/dts/sun6i-a31s-inet-q972.dts b/arch/arm/boot/dts/allwinner/sun6i-a31s-inet-q972.dts
index c5e2c55cdc63..c5e2c55cdc63 100644
--- a/arch/arm/boot/dts/sun6i-a31s-inet-q972.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-inet-q972.dts
diff --git a/arch/arm/boot/dts/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/allwinner/sun6i-a31s-primo81.dts
index b32b70ada7fd..b32b70ada7fd 100644
--- a/arch/arm/boot/dts/sun6i-a31s-primo81.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-primo81.dts
diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi b/arch/arm/boot/dts/allwinner/sun6i-a31s-sina31s-core.dtsi
index 227ad489731c..227ad489731c 100644
--- a/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-sina31s-core.dtsi
diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts b/arch/arm/boot/dts/allwinner/sun6i-a31s-sina31s.dts
index 0af48e143b66..56956352914d 100644
--- a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-sina31s.dts
@@ -67,7 +67,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		status {
+		led-0 {
 			label = "sina31s:status:usr";
 			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */
 		};
diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/allwinner/sun6i-a31s-sinovoip-bpi-m2.dts
index 96554ab4f6d3..f63d67ec9887 100644
--- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-sinovoip-bpi-m2.dts
@@ -75,7 +75,7 @@
 		};
 	};
 
-	mmc2_pwrseq: mmc2_pwrseq {
+	mmc2_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 WIFI_EN */
 	};
diff --git a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts b/arch/arm/boot/dts/allwinner/sun6i-a31s-yones-toptech-bs1078-v2.dts
index 0b61f5368d44..0b61f5368d44 100644
--- a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-yones-toptech-bs1078-v2.dts
diff --git a/arch/arm/boot/dts/sun6i-a31s.dtsi b/arch/arm/boot/dts/allwinner/sun6i-a31s.dtsi
index 97e2c51d0aea..97e2c51d0aea 100644
--- a/arch/arm/boot/dts/sun6i-a31s.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s.dtsi
diff --git a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi b/arch/arm/boot/dts/allwinner/sun6i-reference-design-tablet.dtsi
index f38d19c6be8c..f38d19c6be8c 100644
--- a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun6i-reference-design-tablet.dtsi
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi-m1-plus.dts
index caa935ca4f19..f2d7fab9978d 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi-m1-plus.dts
@@ -86,7 +86,7 @@
 		};
 	};
 
-	mmc3_pwrseq: mmc3_pwrseq {
+	mmc3_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 WL-PMU-EN */
 	};
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts
index 9d792d7a0f92..d8b362c9661a 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts
@@ -48,6 +48,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
 
 / {
 	model = "LeMaker Banana Pi";
@@ -104,16 +105,15 @@
 
 &cpu0 {
 	cpu-supply = <&reg_dcdc2>;
-	operating-points = <
+	operating-points =
 		/* kHz	  uV */
-		960000	1400000
-		912000	1400000
-		864000	1350000
-		720000	1250000
-		528000	1150000
-		312000	1100000
-		144000	1050000
-		>;
+		<960000	1400000>,
+		<912000	1400000>,
+		<864000	1350000>,
+		<720000	1250000>,
+		<528000	1150000>,
+		<312000	1100000>,
+		<144000	1050000>;
 };
 
 &de {
@@ -170,6 +170,32 @@
 &gmac_mdio {
 	phy1: ethernet-phy@1 {
 		reg = <1>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_LAN;
+				linux,default-trigger = "netdev";
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_AMBER>;
+				function = LED_FUNCTION_LAN;
+				linux,default-trigger = "netdev";
+			};
+
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_BLUE>;
+				function = LED_FUNCTION_LAN;
+				linux,default-trigger = "netdev";
+			};
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapro.dts
index e22f0e8bb17a..e22f0e8bb17a 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapro.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapro.dts
diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-cubieboard2.dts
index e35e6990c4b2..e35e6990c4b2 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-cubieboard2.dts
diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-cubietruck.dts
index 52160e368304..be9b31d0f4b5 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-cubietruck.dts
@@ -96,7 +96,7 @@
 		};
 	};
 
-	mmc3_pwrseq: mmc3_pwrseq {
+	mmc3_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */
 		clocks = <&ccu CLK_OUT_A>;
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-haoyu-marsboard.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-haoyu-marsboard.dts
new file mode 100644
index 000000000000..097e479c2772
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-haoyu-marsboard.dts
@@ -0,0 +1,182 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 Conley Lee
+ * Conley Lee <conleylee@foxmail.com>
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "HAOYU Electronics Marsboard A20";
+	compatible = "haoyu,a20-marsboard", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>, <&gmac_txerr>;
+	phy-handle = <&phy0>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	gmac_txerr: gmac-txerr-pin {
+		pins = "PA17";
+		function = "gmac";
+	};
+};
+
+&reg_ahci_5v {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1450000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-hummingbird.dts
index 3def2a330598..f1e26b75cd90 100644
--- a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-hummingbird.dts
@@ -65,7 +65,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	reg_mmc3_vdd: mmc3_vdd {
+	reg_mmc3_vdd: regulator-mmc3-vdd {
 		compatible = "regulator-fixed";
 		regulator-name = "mmc3_vdd";
 		regulator-min-microvolt = <3000000>;
@@ -74,7 +74,7 @@
 		gpio = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
 	};
 
-	reg_gmac_vdd: gmac_vdd {
+	reg_gmac_vdd: regulator-gmac-vdd {
 		compatible = "regulator-fixed";
 		regulator-name = "gmac_vdd";
 		regulator-min-microvolt = <3000000>;
diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-i12-tvbox.dts
index b21ddd0ec1c2..b21ddd0ec1c2 100644
--- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-i12-tvbox.dts
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-a20-adb4006.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-a20-adb4006.dts
new file mode 100644
index 000000000000..577ead1d02a0
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-a20-adb4006.dts
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// Copyright (C) 2023 In-Circuit GmbH
+
+/dts-v1/;
+
+#include "sun7i-a20-icnova-a20.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "In-Circuit ICnova A20 ADB4006";
+	compatible = "incircuit,icnova-a20-adb4006", "incircuit,icnova-a20",
+		     "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_YELLOW>;
+			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* PH21 */
+			default-state = "on";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* PH20 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_ahci_5v {
+	status = "okay";
+};
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-a20.dtsi b/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-a20.dtsi
new file mode 100644
index 000000000000..46616c6bc899
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-a20.dtsi
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// Copyright (C) 2023 In-Circuit GmbH
+
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-swac.dts
index 413505f45a81..413505f45a81 100644
--- a/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-swac.dts
diff --git a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-itead-ibox.dts
index 8ff83016ff5a..8ff83016ff5a 100644
--- a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-itead-ibox.dts
diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-lamobo-r1.dts
index 97518afe4658..97518afe4658 100644
--- a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-lamobo-r1.dts
diff --git a/arch/arm/boot/dts/sun7i-a20-linutronix-testbox-v2.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-linutronix-testbox-v2.dts
index da5a2eea4ce3..da5a2eea4ce3 100644
--- a/arch/arm/boot/dts/sun7i-a20-linutronix-testbox-v2.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-linutronix-testbox-v2.dts
diff --git a/arch/arm/boot/dts/sun7i-a20-m3.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-m3.dts
index f161d5238860..f161d5238860 100644
--- a/arch/arm/boot/dts/sun7i-a20-m3.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-m3.dts
diff --git a/arch/arm/boot/dts/sun7i-a20-mk808c.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-mk808c.dts
index 1491c603f661..1491c603f661 100644
--- a/arch/arm/boot/dts/sun7i-a20-mk808c.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-mk808c.dts
diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb-emmc.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som-evb-emmc.dts
index 20bf09b2226c..fb835730bbc4 100644
--- a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb-emmc.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som-evb-emmc.dts
@@ -14,7 +14,7 @@
 	model = "Olimex A20-Olimex-SOM-EVB-eMMC";
 	compatible = "olimex,a20-olimex-som-evb-emmc", "allwinner,sun7i-a20";
 
-	mmc2_pwrseq: mmc2_pwrseq {
+	mmc2_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-emmc";
 		reset-gpios = <&pio 2 18 GPIO_ACTIVE_LOW>;
 	};
diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som-evb.dts
index f05ee32bc9cb..f05ee32bc9cb 100644
--- a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som-evb.dts
diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb-emmc.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som204-evb-emmc.dts
index a59755a2e7a9..e8977c2fe798 100644
--- a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb-emmc.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som204-evb-emmc.dts
@@ -13,7 +13,7 @@
 	model = "Olimex A20-SOM204-EVB-eMMC";
 	compatible = "olimex,a20-olimex-som204-evb-emmc", "allwinner,sun7i-a20";
 
-	mmc2_pwrseq: mmc2_pwrseq {
+	mmc2_pwrseq: pwrseq-1 {
 		compatible = "mmc-pwrseq-emmc";
 		reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>;
 	};
diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som204-evb.dts
index 54af6c18075b..a55406657449 100644
--- a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som204-evb.dts
@@ -65,7 +65,7 @@
 		};
 	};
 
-	rtl_pwrseq: rtl_pwrseq {
+	rtl_pwrseq: pwrseq-0 {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 6 9 GPIO_ACTIVE_LOW>;
 	};
@@ -177,7 +177,7 @@
 	non-removable;
 	status = "okay";
 
-	rtl8723bs: sdio_wifi@1 {
+	rtl8723bs: wifi@1 {
 		reg = <1>;
 	};
 };
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime-emmc.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime-emmc.dts
index 033cab3443f8..033cab3443f8 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime-emmc.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime-emmc.dts
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime.dts
index 92938d022295..92938d022295 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime.dts
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime2-emmc.dts
index decb014a382b..decb014a382b 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime2-emmc.dts
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime2.dts
index 8077f1716fbc..435a189332e8 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime2.dts
@@ -82,7 +82,7 @@
 		};
 	};
 
-	reg_axp_ipsout: axp_ipsout {
+	reg_axp_ipsout: regulator-axp-ipsout {
 		compatible = "regulator-fixed";
 		regulator-name = "axp-ipsout";
 		regulator-min-microvolt = <5000000>;
@@ -112,7 +112,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy-handle = <&phy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro-emmc.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-micro-emmc.dts
index 2337b44a88aa..2337b44a88aa 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro-emmc.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-micro-emmc.dts
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-micro.dts
index a1b89b2a2999..a1b89b2a2999 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-micro.dts
diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-orangepi-mini.dts
index 84efa01e7cba..84efa01e7cba 100644
--- a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-orangepi-mini.dts
diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-orangepi.dts
index 5d77f1d9818f..5d77f1d9818f 100644
--- a/arch/arm/boot/dts/sun7i-a20-orangepi.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-orangepi.dts
diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-pcduino3-nano.dts
index e40ecb48d726..e40ecb48d726 100644
--- a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-pcduino3-nano.dts
diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-pcduino3.dts
index 4f8d55d3ba79..928b86a95f34 100644
--- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-pcduino3.dts
@@ -78,19 +78,19 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		back {
+		key-back {
 			label = "Key Back";
 			linux,code = <KEY_BACK>;
 			gpios = <&pio 7 17 GPIO_ACTIVE_LOW>;
 		};
 
-		home {
+		key-home {
 			label = "Key Home";
 			linux,code = <KEY_HOME>;
 			gpios = <&pio 7 18 GPIO_ACTIVE_LOW>;
 		};
 
-		menu {
+		key-menu {
 			label = "Key Menu";
 			linux,code = <KEY_MENU>;
 			gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-wexler-tab7200.dts
index fef02fcbbdf8..fef02fcbbdf8 100644
--- a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-wexler-tab7200.dts
diff --git a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-wits-pro-a20-dkt.dts
index 3bfae98f3cc3..29199b6a3b4a 100644
--- a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-wits-pro-a20-dkt.dts
@@ -60,7 +60,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	mmc3_pwrseq: mmc3_pwrseq {
+	mmc3_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */
 	};
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/allwinner/sun7i-a20.dtsi
index 5a40e0280665..5f44f09c5545 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20.dtsi
@@ -106,16 +106,15 @@
 			reg = <0>;
 			clocks = <&ccu CLK_CPU>;
 			clock-latency = <244144>; /* 8 32k periods */
-			operating-points = <
+			operating-points =
 				/* kHz	  uV */
-				960000	1400000
-				912000	1400000
-				864000	1300000
-				720000	1200000
-				528000	1100000
-				312000	1000000
-				144000	1000000
-				>;
+				<960000	1400000>,
+				<912000	1400000>,
+				<864000	1300000>,
+				<720000	1200000>,
+				<528000	1100000>,
+				<312000	1000000>,
+				<144000	1000000>;
 			#cooling-cells = <2>;
 		};
 
@@ -125,16 +124,15 @@
 			reg = <1>;
 			clocks = <&ccu CLK_CPU>;
 			clock-latency = <244144>; /* 8 32k periods */
-			operating-points = <
+			operating-points =
 				/* kHz	  uV */
-				960000	1400000
-				912000	1400000
-				864000	1300000
-				720000	1200000
-				528000	1100000
-				312000	1000000
-				144000	1000000
-				>;
+				<960000	1400000>,
+				<912000	1400000>,
+				<864000	1300000>,
+				<720000	1200000>,
+				<528000	1100000>,
+				<312000	1000000>,
+				<144000	1000000>;
 			#cooling-cells = <2>;
 		};
 	};
@@ -155,14 +153,14 @@
 			};
 
 			trips {
-				cpu_alert0: cpu_alert0 {
+				cpu_alert0: cpu-alert0 {
 					/* milliCelsius */
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit: cpu_crit {
+				cpu_crit: cpu-crit {
 					/* milliCelsius */
 					temperature = <100000>;
 					hysteresis = <2000>;
diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/allwinner/sun8i-a23-a33.dtsi
index 4461d5098b20..2af8382ccdf5 100644
--- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-a33.dtsi
@@ -44,6 +44,7 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
+#include <dt-bindings/clock/sun6i-rtc.h>
 #include <dt-bindings/clock/sun8i-a23-a33-ccu.h>
 #include <dt-bindings/reset/sun8i-a23-a33-ccu.h>
 
@@ -107,7 +108,7 @@
 		#size-cells = <1>;
 		ranges;
 
-		osc24M: osc24M_clk {
+		osc24M: osc24M-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <24000000>;
@@ -115,7 +116,7 @@
 			clock-output-names = "osc24M";
 		};
 
-		ext_osc32k: ext_osc32k_clk {
+		ext_osc32k: ext-osc32k-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <32768>;
@@ -189,7 +190,7 @@
 			clock-names = "ahb",
 				      "tcon-ch0",
 				      "lvds-alt";
-			clock-output-names = "tcon-pixel-clock";
+			clock-output-names = "tcon-data-clock";
 			#clock-cells = <0>;
 			resets = <&ccu RST_BUS_LCD>,
 				 <&ccu RST_BUS_LVDS>;
@@ -329,7 +330,7 @@
 
 		ccu: clock@1c20000 {
 			reg = <0x01c20000 0x400>;
-			clocks = <&osc24M>, <&rtc 0>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
 			clock-names = "hosc", "losc";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -340,7 +341,8 @@
 			reg = <0x01c20800 0x400>;
 			interrupt-parent = <&r_intc>;
 			/* interrupts get set in SoC specific dtsi file */
-			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
@@ -488,7 +490,7 @@
 			clocks = <&ccu CLK_BUS_UART0>;
 			resets = <&ccu RST_BUS_UART0>;
 			dmas = <&dma 6>, <&dma 6>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -501,7 +503,7 @@
 			clocks = <&ccu CLK_BUS_UART1>;
 			resets = <&ccu RST_BUS_UART1>;
 			dmas = <&dma 7>, <&dma 7>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -514,7 +516,7 @@
 			clocks = <&ccu CLK_BUS_UART2>;
 			resets = <&ccu RST_BUS_UART2>;
 			dmas = <&dma 8>, <&dma 8>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -527,7 +529,7 @@
 			clocks = <&ccu CLK_BUS_UART3>;
 			resets = <&ccu RST_BUS_UART3>;
 			dmas = <&dma 9>, <&dma 9>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -540,7 +542,7 @@
 			clocks = <&ccu CLK_BUS_UART4>;
 			resets = <&ccu RST_BUS_UART4>;
 			dmas = <&dma 10>, <&dma 10>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -731,7 +733,7 @@
 			compatible = "allwinner,sun8i-a23-prcm";
 			reg = <0x01f01400 0x200>;
 
-			ar100: ar100_clk {
+			ar100: ar100-clk {
 				compatible = "fixed-factor-clock";
 				#clock-cells = <0>;
 				clock-div = <1>;
@@ -740,7 +742,7 @@
 				clock-output-names = "ar100";
 			};
 
-			ahb0: ahb0_clk {
+			ahb0: ahb0-clk {
 				compatible = "fixed-factor-clock";
 				#clock-cells = <0>;
 				clock-div = <1>;
@@ -749,14 +751,14 @@
 				clock-output-names = "ahb0";
 			};
 
-			apb0: apb0_clk {
+			apb0: apb0-clk {
 				compatible = "allwinner,sun8i-a23-apb0-clk";
 				#clock-cells = <0>;
 				clocks = <&ahb0>;
 				clock-output-names = "apb0";
 			};
 
-			apb0_gates: apb0_gates_clk {
+			apb0_gates: apb0-gates-clk {
 				compatible = "allwinner,sun8i-a23-apb0-gates-clk";
 				#clock-cells = <1>;
 				clocks = <&apb0>;
@@ -765,7 +767,7 @@
 						"apb0_i2c";
 			};
 
-			apb0_rst: apb0_rst {
+			apb0_rst: apb0-rst {
 				compatible = "allwinner,sun6i-a31-clock-reset";
 				#reset-cells = <1>;
 			};
@@ -810,9 +812,8 @@
 			reg = <0x01f02c00 0x400>;
 			interrupt-parent = <&r_intc>;
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb0_gates 0>, <&osc24M>, <&rtc 0>;
+			clocks = <&apb0_gates 0>, <&osc24M>, <&rtc CLK_OSC32K>;
 			clock-names = "apb", "hosc", "losc";
-			resets = <&apb0_rst 0>;
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;
diff --git a/arch/arm/boot/dts/sun8i-a23-evb.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-evb.dts
index 53fb1be0401a..53fb1be0401a 100644
--- a/arch/arm/boot/dts/sun8i-a23-evb.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-evb.dts
diff --git a/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-gt90h-v4.dts
index bcbc9b0758f9..bcbc9b0758f9 100644
--- a/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-gt90h-v4.dts
diff --git a/arch/arm/boot/dts/sun8i-a23-inet86dz.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-inet86dz.dts
index d4405752a414..d4405752a414 100644
--- a/arch/arm/boot/dts/sun8i-a23-inet86dz.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-inet86dz.dts
diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-ippo-q8h-v1.2.dts
index c2f22fc33811..c2f22fc33811 120000
--- a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-ippo-q8h-v1.2.dts
diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-ippo-q8h-v5.dts
index c2f22fc33811..c2f22fc33811 120000
--- a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-ippo-q8h-v5.dts
diff --git a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-polaroid-mid2407pxe03.dts
index d5f6aebd7216..0c585a6d990d 100644
--- a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-polaroid-mid2407pxe03.dts
@@ -52,7 +52,7 @@
 		ethernet0 = &esp8089;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
 		/* The esp8089 needs 200 ms after driving wifi-en high */
@@ -76,7 +76,7 @@
 	non-removable;
 	status = "okay";
 
-	esp8089: sdio_wifi@1 {
+	esp8089: wifi@1 {
 		compatible = "esp,esp8089";
 		reg = <1>;
 		esp,crystal-26M-en = <2>;
diff --git a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-polaroid-mid2809pxe04.dts
index 9f9232a2fefb..63cb4e194a03 100644
--- a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-polaroid-mid2809pxe04.dts
@@ -52,7 +52,7 @@
 		ethernet0 = &esp8089;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
 		/* The esp8089 needs 200 ms after driving wifi-en high */
@@ -69,7 +69,7 @@
 	non-removable;
 	status = "okay";
 
-	esp8089: sdio_wifi@1 {
+	esp8089: wifi@1 {
 		compatible = "esp,esp8089";
 		reg = <1>;
 		esp,crystal-26M-en = <2>;
diff --git a/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-q8-tablet.dts
index 51097c77a152..51097c77a152 100644
--- a/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-q8-tablet.dts
diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/allwinner/sun8i-a23.dtsi
index a5e884a8b2ae..a5e884a8b2ae 100644
--- a/arch/arm/boot/dts/sun8i-a23.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23.dtsi
diff --git a/arch/arm/boot/dts/sun8i-a33-et-q8-v1.6.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-et-q8-v1.6.dts
index 4519fd791a8f..4519fd791a8f 120000
--- a/arch/arm/boot/dts/sun8i-a33-et-q8-v1.6.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-et-q8-v1.6.dts
diff --git a/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-ga10h-v1.1.dts
index 2dfdd0a3151e..f00ce03ffc84 100644
--- a/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-ga10h-v1.1.dts
@@ -85,7 +85,7 @@
 	non-removable;
 	status = "okay";
 
-	rtl8703as: sdio_wifi@1 {
+	rtl8703as: wifi@1 {
 		reg = <1>;
 	};
 };
diff --git a/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-inet-d978-rev2.dts
index 065cb620aa99..162ba93f7484 100644
--- a/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-inet-d978-rev2.dts
@@ -78,7 +78,7 @@
 	non-removable;
 	status = "okay";
 
-	rtl8723bs: sdio_wifi@1 {
+	rtl8723bs: wifi@1 {
 		reg = <1>;
 	};
 };
diff --git a/arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-ippo-q8h-v1.2.dts
index 4519fd791a8f..4519fd791a8f 120000
--- a/arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-ippo-q8h-v1.2.dts
diff --git a/arch/arm/boot/dts/sun8i-a33-olinuxino.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-olinuxino.dts
index 6fee8f133508..6fee8f133508 100644
--- a/arch/arm/boot/dts/sun8i-a33-olinuxino.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-olinuxino.dts
diff --git a/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-q8-tablet.dts
index 9c5750c25613..9c5750c25613 100644
--- a/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-q8-tablet.dts
diff --git a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-sinlinx-sina33.dts
index 0c82ff3c7cb4..0c82ff3c7cb4 100644
--- a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-sinlinx-sina33.dts
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a33-vstar-core1.dtsi b/arch/arm/boot/dts/allwinner/sun8i-a33-vstar-core1.dtsi
new file mode 100644
index 000000000000..ba794b842ec4
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-vstar-core1.dtsi
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Icenowy Zheng <uwu@icenowy.me>
+ */
+
+#include "sun8i-a33.dtsi"
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&mmc2_8bit_pins {
+	/* Increase drive strength for DDR modes */
+	drive-strength = <40>;
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp22x: pmic@3a3 {
+		compatible = "x-powers,axp223";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp223.dtsi"
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-io";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2350000>;
+	regulator-max-microvolt = <2650000>;
+	regulator-name = "vdd-dll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-avcc";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a33-vstar.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-vstar.dts
new file mode 100644
index 000000000000..9f5c29b3df46
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-vstar.dts
@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Icenowy Zheng <uwu@icenowy.me>
+ */
+
+/dts-v1/;
+#include "sun8i-a33-vstar-core1.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Rervision A33-Vstar";
+	compatible = "rervision,a33-vstar",
+		     "rervision,a33-core1",
+		     "allwinner,sun8i-a33";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &r8152;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+	};
+};
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&dai {
+	status = "okay";
+};
+
+&ehci0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	hub@1 {
+		/* Onboard GL850G hub which needs no extra power sequence */
+		compatible = "usb5e3,608";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		r8152: ethernet@4 {
+			/*
+			 * Onboard Realtek RTL8152 USB Ethernet,
+			 * with no MAC address programmed
+			 */
+			compatible = "usbbda,8152";
+			reg = <4>;
+		};
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	status = "okay";
+
+	button-191 {
+		label = "V+";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <191011>;
+	};
+
+	button-391 {
+		label = "V-";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <391304>;
+	};
+
+	button-600 {
+		label = "BACK";
+		linux,code = <KEY_BACK>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pg_pins>;
+	vmmc-supply = <&reg_dldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */
+		interrupt-names = "host-wake";
+	};
+};
+
+/*
+ * Our WiFi chip needs both DLDO1 and DLDO2 to be powered at the same
+ * time, with the two being in sync. Since this is not really
+ * supported right now, just use the two as always on, and we will fix
+ * it later.
+ */
+&reg_dldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi0";
+};
+
+&reg_dldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi1";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&sound {
+	/* TODO: on-board microphone */
+
+	simple-audio-card,widgets = "Headphone", "Headphone Jack";
+	simple-audio-card,routing =
+		"Left DAC", "DACL",
+		"Right DAC", "DACR",
+		"Headphone Jack", "HP";
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>, <&uart1_cts_rts_pg_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_dldo1>;
+		device-wakeup-gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+		host-wakeup-gpios = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+		shutdown-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+	};
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/allwinner/sun8i-a33.dtsi
index 2beddbb3c518..36b2d78cdab9 100644
--- a/arch/arm/boot/dts/sun8i-a33.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33.dtsi
@@ -46,7 +46,7 @@
 #include <dt-bindings/thermal/thermal.h>
 
 / {
-	cpu0_opp_table: opp_table0 {
+	cpu0_opp_table: opp-table-cpu {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -164,7 +164,7 @@
 		io-channels = <&ths>;
 	};
 
-	mali_opp_table: gpu-opp-table {
+	mali_opp_table: opp-table-gpu {
 		compatible = "operating-points-v2";
 
 		opp-144000000 {
@@ -278,6 +278,7 @@
 		dphy: d-phy@1ca1000 {
 			compatible = "allwinner,sun6i-a31-mipi-dphy";
 			reg = <0x01ca1000 0x1000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_MIPI_DSI>,
 				 <&ccu CLK_DSI_DPHY>;
 			clock-names = "bus", "mod";
@@ -322,35 +323,35 @@
 			};
 
 			trips {
-				cpu_alert0: cpu_alert0 {
+				cpu_alert0: cpu-alert0 {
 					/* milliCelsius */
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				gpu_alert0: gpu_alert0 {
+				gpu_alert0: gpu-alert0 {
 					/* milliCelsius */
 					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_alert1: cpu_alert1 {
+				cpu_alert1: cpu-alert1 {
 					/* milliCelsius */
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "hot";
 				};
 
-				gpu_alert1: gpu_alert1 {
+				gpu_alert1: gpu-alert1 {
 					/* milliCelsius */
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "hot";
 				};
 
-				cpu_crit: cpu_crit {
+				cpu_crit: cpu-crit {
 					/* milliCelsius */
 					temperature = <110000>;
 					hysteresis = <2000>;
diff --git a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts b/arch/arm/boot/dts/allwinner/sun8i-a83t-allwinner-h8homlet-v2.dts
index c31c97d16024..c31c97d16024 100644
--- a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a83t-allwinner-h8homlet-v2.dts
diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/allwinner/sun8i-a83t-bananapi-m3.dts
index 5a7e1bd5f825..32e811fa23e2 100644
--- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a83t-bananapi-m3.dts
@@ -95,7 +95,7 @@
 		gpio = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		clocks = <&ac100_rtc 1>;
 		clock-names = "ext_clock";
@@ -105,6 +105,21 @@
 		/* enables internal regulator and de-asserts reset */
 		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
 	};
+
+	/*
+	 * Power supply for the SATA disk, behind a USB-SATA bridge.
+	 * Since it is a USB device, there is no consumer in the DT, so we
+	 * have to keep this always on.
+	 */
+	regulator-sata-disk-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "sata-disk-pwr";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		enable-active-high;
+		gpio = <&pio 3 25 GPIO_ACTIVE_HIGH>; /* PD25 */
+	};
 };
 
 &cpu0 {
diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/allwinner/sun8i-a83t-cubietruck-plus.dts
index 870993393fc2..d5e6ddaffbce 100644
--- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a83t-cubietruck-plus.dts
@@ -144,7 +144,7 @@
 		compatible = "linux,spdif-dit";
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		clocks = <&ac100_rtc 1>;
 		clock-names = "ext_clock";
diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/allwinner/sun8i-a83t-tbs-a711.dts
index 7fe2a584ddf9..43982b106a4d 100644
--- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a83t-tbs-a711.dts
@@ -123,7 +123,7 @@
 		vin-supply = <&reg_vbat>;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
 
@@ -169,7 +169,7 @@
 	status = "okay";
 
 	touchscreen@38 {
-		compatible = "edt,edt-ft5x06";
+		compatible = "edt,edt-ft5206";
 		reg = <0x38>;
 		interrupt-parent = <&r_pio>;
 		interrupts = <0 7 IRQ_TYPE_EDGE_FALLING>; /* PL7 */
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/allwinner/sun8i-a83t.dtsi
index ac97eac91349..6f88d8764e6a 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-a83t.dtsi
@@ -164,7 +164,7 @@
 		ranges;
 
 		/* TODO: PRCM block has a mux for this. */
-		osc24M: osc24M_clk {
+		osc24M: osc24M-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <24000000>;
@@ -177,14 +177,14 @@
 		 * It is an internal RC-based oscillator.
 		 * TODO: Its controls are in the PRCM block.
 		 */
-		osc16M: osc16M_clk {
+		osc16M: osc16M-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <16000000>;
 			clock-output-names = "osc16M";
 		};
 
-		osc16Md512: osc16Md512_clk {
+		osc16Md512: osc16Md512-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-factor-clock";
 			clock-div = <512>;
@@ -200,7 +200,7 @@
 		status = "disabled";
 	};
 
-	cpu0_opp_table: opp_table0 {
+	cpu0_opp_table: opp-table-cluster0 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -253,7 +253,7 @@
 		};
 	};
 
-	cpu1_opp_table: opp_table1 {
+	cpu1_opp_table: opp-table-cluster1 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -456,7 +456,7 @@
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
 			clock-names = "ahb", "tcon-ch0";
-			clock-output-names = "tcon-pixel-clock";
+			clock-output-names = "tcon-data-clock";
 			#clock-cells = <0>;
 			resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>;
 			reset-names = "lcd", "lvds";
@@ -1127,7 +1127,7 @@
 			#reset-cells = <1>;
 		};
 
-		r_cpucfg@1f01c00 {
+		cpucfg@1f01c00 {
 			compatible = "allwinner,sun8i-a83t-r-cpucfg";
 			reg = <0x1f01c00 0x400>;
 		};
@@ -1225,7 +1225,7 @@
 			};
 
 			cooling-maps {
-				cpu-hot-limit {
+				map0 {
 					trip = <&cpu0_hot>;
 					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
@@ -1255,7 +1255,7 @@
 			};
 
 			cooling-maps {
-				cpu-hot-limit {
+				map0 {
 					trip = <&cpu1_hot>;
 					cooling-device = <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 							 <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-bananapi-m2-zero.dts
index 8e8634ff2f9d..d3a7c9fa23e4 100644
--- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-bananapi-m2-zero.dts
@@ -47,13 +47,14 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		sw4 {
+		switch-4 {
 			label = "power";
-			linux,code = <BTN_0>;
+			linux,code = <KEY_POWER>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
 		};
 	};
 
@@ -102,10 +103,10 @@
 		cpu-supply = <&reg_vcc1v2>;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "ext_clock";
 	};
 };
@@ -180,7 +181,7 @@
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
 		max-speed = <1500000>;
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "lpo";
 		vbat-supply = <&reg_vcc3v3>;
 		vddio-supply = <&reg_vcc3v3>;
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-libretech-all-h3-cc.dts b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-libretech-all-h3-cc.dts
index 4db0d4bb65eb..4db0d4bb65eb 100644
--- a/arch/arm/boot/dts/sun8i-h2-plus-libretech-all-h3-cc.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-libretech-all-h3-cc.dts
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-r1.dts
index 3356f4210d45..79b03b31c5eb 100644
--- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-r1.dts
@@ -43,11 +43,12 @@
 /* Orange Pi R1 is based on Orange Pi Zero design */
 #include "sun8i-h2-plus-orangepi-zero.dts"
 
+/delete-node/ &reg_vcc_wifi;
+
 / {
 	model = "Xunlong Orange Pi R1";
 	compatible = "xunlong,orangepi-r1", "allwinner,sun8i-h2-plus";
 
-	/delete-node/ reg_vcc_wifi;
 
 	/*
 	 * Ths pin of this regulator is the same with the Wi-Fi extra
@@ -89,7 +90,7 @@
 	vmmc-supply = <&reg_vcc3v3>;
 	vqmmc-supply = <&reg_vcc3v3>;
 
-	rtl8189etv: sdio_wifi@1 {
+	rtl8189etv: wifi@1 {
 		reg = <1>;
 	};
 };
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts
index f19ed981da9d..b23cec5b89eb 100644
--- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts
@@ -80,7 +80,7 @@
 		};
 	};
 
-	reg_vcc_wifi: reg_vcc_wifi {
+	reg_vcc_wifi: reg-vcc-wifi {
 		compatible = "regulator-fixed";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
@@ -105,13 +105,27 @@
 		states = <1100000 0>, <1300000 1>;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>;
 		post-power-on-delay-ms = <200>;
 	};
 };
 
+/*
+ * Audio input/output is exposed on the 13-pin header and can't be used for
+ * anything else. However, adapter boards may use different audio routing.
+ * - https://linux-sunxi.org/Xunlong_Orange_Pi_Zero#Expansion_Port
+ * - Allwinner H3 Datasheet, section 3.1. Pin Characteristics
+ */
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"MIC1", "Mic",
+		"Mic",  "MBIAS";
+	status = "disabled";
+};
+
 &cpu0 {
 	cpu-supply = <&reg_vdd_cpux>;
 };
@@ -149,7 +163,7 @@
 	 * Explicitly define the sdio device, so that we can add an ethernet
 	 * alias for it (which e.g. makes u-boot set a mac-address).
 	 */
-	xr819: sdio_wifi@1 {
+	xr819: wifi@1 {
 		reg = <1>;
 	};
 };
@@ -169,7 +183,7 @@
 	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "mxicy,mx25l1606e", "winbond,w25q128";
+		compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <40000000>;
 	};
diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus-v1.2.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-bananapi-m2-plus-v1.2.dts
index fc4a8c3d084d..fc4a8c3d084d 100644
--- a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus-v1.2.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-bananapi-m2-plus-v1.2.dts
diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-bananapi-m2-plus.dts
index 195a75da13f1..195a75da13f1 100644
--- a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-bananapi-m2-plus.dts
diff --git a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-beelink-x2.dts
index f0e591e1c771..5b77300307de 100644
--- a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-beelink-x2.dts
@@ -57,6 +57,12 @@
 		ethernet1 = &sdiowifi;
 	};
 
+	cec {
+		compatible = "cec-gpio";
+		cec-gpios = <&pio 0 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PA14 */
+		hdmi-phandle = <&hdmi>;
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
@@ -87,11 +93,15 @@
 		};
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
-		clocks = <&rtc 1>;
-		clock-names = "ext_clock";
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
 	};
 
 	sound_spdif {
@@ -112,15 +122,11 @@
 		compatible = "linux,spdif-dit";
 	};
 
-	r-gpio-keys {
-		compatible = "gpio-keys";
-
-		power {
-			label = "power";
-			linux,code = <KEY_POWER>;
-			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
-			wakeup-source;
-		};
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
 	};
 };
 
@@ -179,7 +185,7 @@
 	 * Explicitly define the sdio device, so that we can add an ethernet
 	 * alias for it (which e.g. makes u-boot set a mac-address).
 	 */
-	sdiowifi: sdio_wifi@1 {
+	sdiowifi: wifi@1 {
 		reg = <1>;
 	};
 };
diff --git a/arch/arm/boot/dts/sun8i-h3-emlid-neutis-n5h3-devboard.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-emlid-neutis-n5h3-devboard.dts
index 02fbe00cde97..02fbe00cde97 100644
--- a/arch/arm/boot/dts/sun8i-h3-emlid-neutis-n5h3-devboard.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-emlid-neutis-n5h3-devboard.dts
diff --git a/arch/arm/boot/dts/sun8i-h3-emlid-neutis-n5h3.dtsi b/arch/arm/boot/dts/allwinner/sun8i-h3-emlid-neutis-n5h3.dtsi
index eedd5da5dc2f..35e71f46c197 100644
--- a/arch/arm/boot/dts/sun8i-h3-emlid-neutis-n5h3.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-emlid-neutis-n5h3.dtsi
@@ -8,4 +8,4 @@
 /dts-v1/;
 
 #include "sun8i-h3.dtsi"
-#include <arm/sunxi-h3-h5-emlid-neutis.dtsi>
+#include "sunxi-h3-h5-emlid-neutis.dtsi"
diff --git a/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-libretech-all-h3-cc.dts
index a8b2f0f1c11d..a8b2f0f1c11d 100644
--- a/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-libretech-all-h3-cc.dts
diff --git a/arch/arm/boot/dts/sun8i-h3-mapleboard-mp130.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-mapleboard-mp130.dts
index ff0a7a952e0c..f5c8ccc5b872 100644
--- a/arch/arm/boot/dts/sun8i-h3-mapleboard-mp130.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-mapleboard-mp130.dts
@@ -39,16 +39,16 @@
 		};
 	};
 
-	r_gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			label = "power";
 			linux,code = <KEY_POWER>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; /* PL3 */
 		};
 
-		user {
+		key-user {
 			label = "user";
 			linux,code = <BTN_0>;
 			gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-duo2.dts
index 8e7dfcffe1fb..2b0566d4b386 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-duo2.dts
@@ -37,10 +37,10 @@
 		};
 	};
 
-	r_gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		k1 {
+		key-0 {
 			label = "k1";
 			linux,code = <BTN_0>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; /* PL3 */
@@ -57,7 +57,7 @@
 		regulator-ramp-delay = <50>; /* 4ms */
 
 		enable-active-high;
-		enable-gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		enable-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
 		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
 		gpios-states = <0x1>;
 		states = <1100000 0>, <1300000 1>;
@@ -87,10 +87,10 @@
 		vin-supply = <&reg_vcc5v0>;
         };
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "ext_clock";
 	};
 
@@ -119,7 +119,7 @@
 	non-removable;
 	status = "okay";
 
-	sdio_wifi: sdio_wifi@1 {
+	sdio_wifi: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&pio>;
@@ -151,7 +151,7 @@
 
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "lpo";
 		vbat-supply = <&reg_vcc3v3>;
 		vddio-supply = <&reg_vcc3v3>;
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-m1-plus.dts
index 4ba533b0340f..59bd0746acf8 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-m1-plus.dts
@@ -62,7 +62,7 @@
 		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
 	};
@@ -132,7 +132,7 @@
 	non-removable;
 	status = "okay";
 
-	sdio_wifi: sdio_wifi@1 {
+	sdio_wifi: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&pio>;
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-m1.dts
index 69243dcb30a6..69243dcb30a6 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-m1.dts
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo-air.dts
index be49eabbff94..9a2742363cd0 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo-air.dts
@@ -73,7 +73,7 @@
 		};
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
 	};
@@ -94,7 +94,7 @@
 	non-removable;
 	status = "okay";
 
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&pio>;
@@ -103,12 +103,40 @@
 	};
 };
 
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pa_pins>;
 	status = "okay";
 };
 
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>, <&uart3_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_vcc3v3>;
+		vddio-supply = <&reg_vcc3v3>;
+		device-wakeup-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
+		host-wakeup-gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
+		shutdown-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+	};
+};
+
 &usbphy {
 	/* USB VBUS is always on */
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo.dts
index 9f33f6fae595..df71fab3cf4e 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo.dts
@@ -45,6 +45,10 @@
 / {
 	model = "FriendlyARM NanoPi NEO";
 	compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3";
+
+	aliases {
+		ethernet0 = &emac;
+	};
 };
 
 &ehci0 {
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-r1.dts
index 26e2e6172e0d..870649760f70 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-r1.dts
@@ -43,10 +43,10 @@
 			 <1300000 0x1>;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "ext_clock";
 	};
 
@@ -147,7 +147,7 @@
 
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "lpo";
 		vbat-supply = <&reg_vcc3v3>;
 		vddio-supply = <&reg_vcc3v3>;
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi.dtsi
index c7c3e7d8b3c8..cf8413fba6c1 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi.dtsi
@@ -73,14 +73,14 @@
 		};
 	};
 
-	r_gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		input-name = "k1";
 
-		k1 {
+		key-0 {
 			label = "k1";
 			linux,code = <KEY_POWER>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-2.dts
index 597c425d08ec..d2ae47b074bf 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-2.dts
@@ -88,23 +88,24 @@
 		};
 	};
 
-	r_gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		sw2 {
+		switch-2 {
 			label = "sw2";
 			linux,code = <BTN_1>;
 			gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>;
 		};
 
-		sw4 {
+		switch-4 {
 			label = "sw4";
-			linux,code = <BTN_0>;
+			linux,code = <KEY_POWER>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
 		};
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 WIFI_EN */
 	};
@@ -168,7 +169,7 @@
 	 * Explicitly define the sdio device, so that we can add an ethernet
 	 * alias for it (which e.g. makes u-boot set a mac-address).
 	 */
-	rtl8189: sdio_wifi@1 {
+	rtl8189: wifi@1 {
 		reg = <1>;
 	};
 };
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-lite.dts
index 6f9c97add54e..6a4316a52469 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-lite.dts
@@ -87,10 +87,10 @@
 		};
 	};
 
-	r_gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		sw4 {
+		switch-4 {
 			label = "sw4";
 			linux,code = <BTN_0>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
@@ -143,7 +143,7 @@
 	 * Explicitly define the sdio device, so that we can add an ethernet
 	 * alias for it (which e.g. makes u-boot set a mac-address).
 	 */
-	rtl8189ftv: sdio_wifi@1 {
+	rtl8189ftv: wifi@1 {
 		reg = <1>;
 	};
 };
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-one.dts
index 4759ba3f2986..59f6f6d5e7ca 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-one.dts
@@ -86,10 +86,10 @@
 		};
 	};
 
-	r_gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		sw4 {
+		switch-4 {
 			label = "sw4";
 			linux,code = <BTN_0>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-pc-plus.dts
index babf4cf1b2f6..8a49b3376dfc 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-pc-plus.dts
@@ -63,7 +63,7 @@
 	 * Explicitly define the sdio device, so that we can add an ethernet
 	 * alias for it (which e.g. makes u-boot set a mac-address).
 	 */
-	rtl8189ftv: sdio_wifi@1 {
+	rtl8189ftv: wifi@1 {
 		reg = <1>;
 	};
 };
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-pc.dts
index 5aff8ecc66cb..b96e015f54ee 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-pc.dts
@@ -86,13 +86,14 @@
 		};
 	};
 
-	r_gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		sw4 {
+		switch-4 {
 			label = "sw4";
-			linux,code = <BTN_0>;
+			linux,code = <KEY_POWER>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-plus.dts
index d05fa679dcd3..d05fa679dcd3 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-plus.dts
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-plus2e.dts
index b6ca45d18e51..b6ca45d18e51 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-plus2e.dts
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-zero-plus2.dts
index 561ea1d2f861..97a3565ac7a8 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-zero-plus2.dts
@@ -92,13 +92,27 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
 		post-power-on-delay-ms = <200>;
 	};
 };
 
+/*
+ * Audio input/output is exposed on the 13-pin header and can't be used for
+ * anything else. However, adapter boards may use different audio routing.
+ * - http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-Zero-Plus-2.html
+ * - Allwinner H3 Datasheet, section 3.1. Pin Characteristics
+ */
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"MIC1", "Mic",
+		"Mic",  "MBIAS";
+	status = "disabled";
+};
+
 &de {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun8i-h3-rervision-dvk.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-rervision-dvk.dts
index 4738f3a9efe4..4738f3a9efe4 100644
--- a/arch/arm/boot/dts/sun8i-h3-rervision-dvk.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-rervision-dvk.dts
diff --git a/arch/arm/boot/dts/sun8i-h3-zeropi.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-zeropi.dts
index 7d3e7323b661..7d3e7323b661 100644
--- a/arch/arm/boot/dts/sun8i-h3-zeropi.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-zeropi.dts
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/allwinner/sun8i-h3.dtsi
index 4e89701df91f..cfd039840b43 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3.dtsi
@@ -44,7 +44,7 @@
 #include <dt-bindings/thermal/thermal.h>
 
 / {
-	cpu0_opp_table: opp_table0 {
+	cpu0_opp_table: opp-table-cpu {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -112,7 +112,7 @@
 		};
 	};
 
-	gpu_opp_table: gpu-opp-table {
+	gpu_opp_table: opp-table-gpu {
 		compatible = "operating-points-v2";
 
 		opp-120000000 {
@@ -245,7 +245,7 @@
 		cpu_thermal: cpu-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
-			thermal-sensors = <&ths 0>;
+			thermal-sensors = <&ths>;
 
 			trips {
 				cpu_hot_trip: cpu-hot {
@@ -262,7 +262,7 @@
 			};
 
 			cooling-maps {
-				cpu-hot-limit {
+				map0 {
 					trip = <&cpu_hot_trip>;
 					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
@@ -282,6 +282,10 @@
 	compatible = "allwinner,sun8i-h3-de2-clk";
 };
 
+&mbus {
+	compatible = "allwinner,sun8i-h3-mbus";
+};
+
 &mmc0 {
 	compatible = "allwinner,sun7i-a20-mmc";
 	clocks = <&ccu CLK_BUS_MMC0>,
diff --git a/arch/arm/boot/dts/allwinner/sun8i-orangepi-zero-interface-board.dtso b/arch/arm/boot/dts/allwinner/sun8i-orangepi-zero-interface-board.dtso
new file mode 100644
index 000000000000..e137eefee341
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-orangepi-zero-interface-board.dtso
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright (C) 2025 J. Neuschäfer <j.ne@posteo.net>
+ *
+ * Devicetree overlay for the Orange Pi Zero Interface board (OP0014).
+ *
+ *   https://orangepi.com/index.php?route=product/product&product_id=871
+ *
+ * This overlay applies to the following base files:
+ *
+ * - arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts
+ * - arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-zero-plus2.dts
+ */
+
+/dts-v1/;
+/plugin/;
+
+&codec {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-q8-common.dtsi b/arch/arm/boot/dts/allwinner/sun8i-q8-common.dtsi
index 3d9a1524e17e..a0f787581dd9 100644
--- a/arch/arm/boot/dts/sun8i-q8-common.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-q8-common.dtsi
@@ -62,7 +62,7 @@
 		};
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		/*
 		 * Q8 boards use various PL# pins as wifi-en. On other boards
@@ -82,7 +82,7 @@
 };
 
 &ehci0 {
-	status  = "okay";
+	status = "okay";
 };
 
 &mmc1 {
@@ -94,7 +94,7 @@
 	non-removable;
 	status = "okay";
 
-	sdio_wifi: sdio_wifi@1 {
+	sdio_wifi: wifi@1 {
 		reg = <1>;
 	};
 };
diff --git a/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts b/arch/arm/boot/dts/allwinner/sun8i-r16-bananapi-m2m.dts
index bf5b5e2f6168..f4bf46b35bec 100644
--- a/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-r16-bananapi-m2m.dts
@@ -88,10 +88,10 @@
 		regulator-max-microvolt = <5000000>;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "ext_clock";
 	};
 };
@@ -283,7 +283,7 @@
 
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "lpo";
 		vbat-supply = <&reg_dldo1>;
 		vddio-supply = <&reg_aldo3>;
diff --git a/arch/arm/boot/dts/sun8i-r16-nintendo-nes-classic.dts b/arch/arm/boot/dts/allwinner/sun8i-r16-nintendo-nes-classic.dts
index 246dec5846a4..246dec5846a4 100644
--- a/arch/arm/boot/dts/sun8i-r16-nintendo-nes-classic.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-r16-nintendo-nes-classic.dts
diff --git a/arch/arm/boot/dts/sun8i-r16-nintendo-super-nes-classic.dts b/arch/arm/boot/dts/allwinner/sun8i-r16-nintendo-super-nes-classic.dts
index 80761d7904ec..80761d7904ec 100644
--- a/arch/arm/boot/dts/sun8i-r16-nintendo-super-nes-classic.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-r16-nintendo-super-nes-classic.dts
diff --git a/arch/arm/boot/dts/sun8i-r16-parrot.dts b/arch/arm/boot/dts/allwinner/sun8i-r16-parrot.dts
index 95543a9c2118..75067522ff59 100644
--- a/arch/arm/boot/dts/sun8i-r16-parrot.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-r16-parrot.dts
@@ -75,7 +75,7 @@
 		};
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */
 	};
diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/allwinner/sun8i-r40-bananapi-m2-ultra.dts
index a6a1087a0c9b..cd2351acc32f 100644
--- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-r40-bananapi-m2-ultra.dts
@@ -43,6 +43,7 @@
 
 /dts-v1/;
 #include "sun8i-r40.dtsi"
+#include "sun8i-r40-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 
@@ -99,7 +100,7 @@
 		enable-active-high;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */
 		clocks = <&ccu CLK_OUTA>;
@@ -113,6 +114,10 @@
 	status = "okay";
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &de {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/allwinner/sun8i-r40-cpu-opp.dtsi b/arch/arm/boot/dts/allwinner/sun8i-r40-cpu-opp.dtsi
new file mode 100644
index 000000000000..649928b361af
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-r40-cpu-opp.dtsi
@@ -0,0 +1,52 @@
+/{
+	cpu0_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <1000000 1000000 1300000>;
+			clock-latency-ns = <2000000>;
+		};
+
+		opp-912000000 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-microvolt = <1100000 1100000 1300000>;
+			clock-latency-ns = <2000000>;
+		};
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1160000 1160000 1300000>;
+			clock-latency-ns = <2000000>;
+		};
+
+		opp-1104000000 {
+			opp-hz = /bits/ 64 <1104000000>;
+			opp-microvolt = <1240000 1240000 1300000>;
+			clock-latency-ns = <2000000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1300000 1300000 1300000>;
+			clock-latency-ns = <2000000>;
+		};
+	};
+};
+
+&cpu0 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
+
+&cpu1 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
+
+&cpu2 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
+
+&cpu3 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
diff --git a/arch/arm/boot/dts/sun8i-r40-feta40i.dtsi b/arch/arm/boot/dts/allwinner/sun8i-r40-feta40i.dtsi
index 265e0fa57a32..c12361d0317f 100644
--- a/arch/arm/boot/dts/sun8i-r40-feta40i.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-r40-feta40i.dtsi
@@ -5,6 +5,11 @@
 //  Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
 
 #include "sun8i-r40.dtsi"
+#include "sun8i-r40-cpu-opp.dtsi"
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
 
 &i2c0 {
 	status = "okay";
@@ -37,6 +42,13 @@
 	vcc-pg-supply = <&reg_dldo1>;
 };
 
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3-tv-usb";
+};
+
 &reg_aldo2 {
 	regulator-always-on;
 	regulator-min-microvolt = <1800000>;
diff --git a/arch/arm/boot/dts/sun8i-r40-oka40i-c.dts b/arch/arm/boot/dts/allwinner/sun8i-r40-oka40i-c.dts
index 0bd1336206b8..15b0b4de626a 100644
--- a/arch/arm/boot/dts/sun8i-r40-oka40i-c.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-r40-oka40i-c.dts
@@ -62,7 +62,7 @@
 		regulator-max-microvolt = <5000000>;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; // PB10 WIFI_EN
 		clocks = <&ccu CLK_OUTA>;
diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/allwinner/sun8i-r40.dtsi
index 291f4784e86c..f0ed802a9d08 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-r40.dtsi
@@ -42,6 +42,7 @@
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
 #include <dt-bindings/clock/sun8i-de2.h>
 #include <dt-bindings/clock/sun8i-r40-ccu.h>
 #include <dt-bindings/clock/sun8i-tcon-top.h>
@@ -84,24 +85,36 @@
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <0>;
+			clocks = <&ccu CLK_CPU>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <1>;
+			clocks = <&ccu CLK_CPU>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@2 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <2>;
+			clocks = <&ccu CLK_CPU>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@3 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <3>;
+			clocks = <&ccu CLK_CPU>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
 		};
 	};
 
@@ -117,6 +130,30 @@
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&ths 0>;
+
+			trips {
+				cpu_hot_trip: cpu-hot {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_very_hot_trip: cpu-very-hot {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_hot_trip>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		gpu_thermal: gpu-thermal {
@@ -301,6 +338,8 @@
 			resets = <&ccu RST_BUS_VE>;
 			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
 			allwinner,sram = <&ve_sram 1>;
+			interconnects = <&mbus 4>;
+			interconnect-names = "dma-mem";
 		};
 
 		mmc0: mmc@1c0f000 {
@@ -485,7 +524,7 @@
 		ccu: clock@1c20000 {
 			compatible = "allwinner,sun8i-r40-ccu";
 			reg = <0x01c20000 0x400>;
-			clocks = <&osc24M>, <&rtc 0>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
 			clock-names = "hosc", "losc";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -504,13 +543,24 @@
 			compatible = "allwinner,sun8i-r40-pinctrl";
 			reg = <0x01c20800 0x400>;
 			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;
 			#gpio-cells = <3>;
 
+			can_ph_pins: can-ph-pins {
+				pins = "PH20", "PH21";
+				function = "can";
+			};
+
+			can_pa_pins: can-pa-pins {
+				pins = "PA16", "PA17";
+				function = "can";
+			};
+
 			clk_out_a_pin: clk-out-a-pin {
 				pins = "PI12";
 				function = "clk_out_a";
@@ -655,7 +705,7 @@
 			};
 
 			/omit-if-no-ref/
-			uart2_rts_cts_pi_pins: uart2-rts-cts-pi-pins{
+			uart2_rts_cts_pi_pins: uart2-rts-cts-pi-pins {
 				pins = "PI16", "PI17";
 				function = "uart2";
 			};
@@ -736,6 +786,45 @@
 			status = "disabled";
 		};
 
+		i2s0: i2s@1c22000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-r40-i2s",
+				     "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22000 0x400>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
+			clock-names = "apb", "mod";
+			resets = <&ccu RST_BUS_I2S0>;
+			dmas = <&dma 3>, <&dma 3>;
+			dma-names = "rx", "tx";
+		};
+
+		i2s1: i2s@1c22400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-r40-i2s",
+				     "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22400 0x400>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
+			clock-names = "apb", "mod";
+			resets = <&ccu RST_BUS_I2S1>;
+			dmas = <&dma 4>, <&dma 4>;
+			dma-names = "rx", "tx";
+		};
+
+		i2s2: i2s@1c22800 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-r40-i2s",
+				     "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22800 0x400>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>;
+			clock-names = "apb", "mod";
+			resets = <&ccu RST_BUS_I2S2>;
+			dmas = <&dma 6>, <&dma 6>;
+			dma-names = "rx", "tx";
+		};
+
 		ths: thermal-sensor@1c24c00 {
 			compatible = "allwinner,sun8i-r40-ths";
 			reg = <0x01c24c00 0x100>;
@@ -887,6 +976,15 @@
 			#size-cells = <0>;
 		};
 
+		can0: can@1c2bc00 {
+			compatible = "allwinner,sun8i-r40-can";
+			reg = <0x01c2bc00 0x400>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CAN>;
+			resets = <&ccu RST_BUS_CAN>;
+			status = "disabled";
+		};
+
 		i2c4: i2c@1c2c000 {
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x01c2c000 0x400>;
@@ -1173,8 +1271,8 @@
 			reg-io-width = <1>;
 			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_HDMI0>, <&ccu CLK_HDMI_SLOW>,
-				 <&ccu CLK_HDMI>;
-			clock-names = "iahb", "isfr", "tmds";
+				 <&ccu CLK_HDMI>, <&rtc CLK_OSC32K>;
+			clock-names = "iahb", "isfr", "tmds", "cec";
 			resets = <&ccu RST_BUS_HDMI1>;
 			reset-names = "ctrl";
 			phys = <&hdmi_phy>;
diff --git a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi b/arch/arm/boot/dts/allwinner/sun8i-reference-design-tablet.dtsi
index 872d56caa9ce..872d56caa9ce 100644
--- a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-reference-design-tablet.dtsi
diff --git a/arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi b/arch/arm/boot/dts/allwinner/sun8i-s3-elimo-impetus.dtsi
index 052b010a5607..052b010a5607 100644
--- a/arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-s3-elimo-impetus.dtsi
diff --git a/arch/arm/boot/dts/sun8i-s3-elimo-initium.dts b/arch/arm/boot/dts/allwinner/sun8i-s3-elimo-initium.dts
index 039677c2cc65..039677c2cc65 100644
--- a/arch/arm/boot/dts/sun8i-s3-elimo-initium.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-s3-elimo-initium.dts
diff --git a/arch/arm/boot/dts/sun8i-s3-lichee-zero-plus.dts b/arch/arm/boot/dts/allwinner/sun8i-s3-lichee-zero-plus.dts
index d18192d51d1b..d18192d51d1b 100644
--- a/arch/arm/boot/dts/sun8i-s3-lichee-zero-plus.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-s3-lichee-zero-plus.dts
diff --git a/arch/arm/boot/dts/sun8i-s3-pinecube.dts b/arch/arm/boot/dts/allwinner/sun8i-s3-pinecube.dts
index 20966e954eda..e0d4404b5957 100644
--- a/arch/arm/boot/dts/sun8i-s3-pinecube.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-s3-pinecube.dts
@@ -51,7 +51,7 @@
 		startup-delay-us = <200000>;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 1 3 GPIO_ACTIVE_LOW>; /* PB3 WIFI-RST */
 		post-power-on-delay-ms = <200>;
diff --git a/arch/arm/boot/dts/allwinner/sun8i-t113s-mangopi-mq-r-t113.dts b/arch/arm/boot/dts/allwinner/sun8i-t113s-mangopi-mq-r-t113.dts
new file mode 100644
index 000000000000..8b3a75383816
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-t113s-mangopi-mq-r-t113.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2022 Arm Ltd.
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/dts-v1/;
+
+#include "sun8i-t113s.dtsi"
+#include "sunxi-d1s-t113-mangopi-mq-r.dtsi"
+
+/ {
+	model = "MangoPi MQ-R-T113";
+	compatible = "widora,mangopi-mq-r-t113", "allwinner,sun8i-t113s";
+
+	aliases {
+		ethernet0 = &rtl8189ftv;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vcc_core>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_vcc_core>;
+};
+
+&mmc1 {
+	rtl8189ftv: wifi@1 {
+		reg = <1>;
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 = WL_WAKE_AP */
+		interrupt-names = "host-wake";
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-basic-carrier.dts b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-basic-carrier.dts
new file mode 100644
index 000000000000..5262102a85f6
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-basic-carrier.dts
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 Lukas Schmid <lukas.schmid@netcube.li>
+ */
+
+/dts-v1/;
+#include "sun8i-t113s-netcube-nagami.dtsi"
+
+/ {
+	model = "NetCube Systems Nagami Basic Carrier Board";
+	compatible = "netcube,nagami-basic-carrier", "netcube,nagami",
+		     "allwinner,sun8i-t113s";
+};
+
+&can0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2s1 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	broken-cd;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-keypad-carrier.dts b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-keypad-carrier.dts
new file mode 100644
index 000000000000..4ffa6a0216d8
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-keypad-carrier.dts
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 Lukas Schmid <lukas.schmid@netcube.li>
+ */
+
+/dts-v1/;
+#include "sun8i-t113s-netcube-nagami.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "NetCube Systems Nagami Keypad Carrier Board";
+	compatible = "netcube,nagami-keypad-carrier", "netcube,nagami",
+		     "allwinner,sun8i-t113s";
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_status_red: led-status-red {
+			gpios = <&pio 3 16 GPIO_ACTIVE_HIGH>;  /* PD16 */
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_STATUS;
+		};
+
+		led_status_green: led-status-green {
+			gpios = <&pio 3 22 GPIO_ACTIVE_HIGH>;  /* PD22 */
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	tca8418: keypad@34 {
+		compatible = "ti,tca8418";
+		reg = <0x34>;
+		interrupts-extended = <&pio 5 6 IRQ_TYPE_EDGE_FALLING>;  /* PF6 */
+		linux,keymap = <MATRIX_KEY(0x03, 0x00, KEY_NUMERIC_A)
+				MATRIX_KEY(0x03, 0x01, KEY_NUMERIC_1)
+				MATRIX_KEY(0x03, 0x02, KEY_NUMERIC_2)
+				MATRIX_KEY(0x03, 0x03, KEY_NUMERIC_3)
+				MATRIX_KEY(0x02, 0x00, KEY_NUMERIC_B)
+				MATRIX_KEY(0x02, 0x01, KEY_NUMERIC_4)
+				MATRIX_KEY(0x02, 0x02, KEY_NUMERIC_5)
+				MATRIX_KEY(0x02, 0x03, KEY_NUMERIC_6)
+				MATRIX_KEY(0x01, 0x00, KEY_NUMERIC_C)
+				MATRIX_KEY(0x01, 0x01, KEY_NUMERIC_7)
+				MATRIX_KEY(0x01, 0x02, KEY_NUMERIC_8)
+				MATRIX_KEY(0x01, 0x03, KEY_NUMERIC_9)
+				MATRIX_KEY(0x00, 0x00, KEY_NUMERIC_D)
+				MATRIX_KEY(0x00, 0x01, KEY_CLEAR)
+				MATRIX_KEY(0x00, 0x02, KEY_NUMERIC_0)
+				MATRIX_KEY(0x00, 0x03, KEY_OK)
+		>;
+		keypad,num-rows = <4>;
+		keypad,num-columns = <4>;
+	};
+};
+
+&pio {
+	gpio-line-names = "", "", "", "", // PA
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "", // PB
+			  "", "", "UART3_TX", "UART3_RX",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "eMMC_CLK", "eMMC_CMD", // PC
+			  "eMMC_D2", "eMMC_D1", "eMMC_D0", "eMMC_D3",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "", // PD
+			  "", "", "", "",
+			  "", "USB_SEC_EN", "", "",
+			  "", "", "", "",
+			  "LED_STATUS_RED", "", "", "",
+			  "I2C2_SCL", "I2C2_SDA", "LED_STATUS_GREEN", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "ETH_CRSDV", "ETH_RXD0", "ETH_RXD1", "ETH_TXCK", // PE
+			  "ETH_TXD0", "ETH_TXD1", "ETH_TXEN", "",
+			  "ETH_MDC", "ETH_MDIO", "QWIIC_nINT", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "", // PF
+			  "", "", "KEY_nINT", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "ESP_CLK", "ESP_CMD", "ESP_D0", "ESP_D1", // PG
+			  "ESP_D2", "ESP_D3", "UART1_TXD", "UART1_RXD",
+			  "ESP_nBOOT", "ESP_nRST", "I2C3_SCL", "I2C3_SDA",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami.dtsi b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami.dtsi
new file mode 100644
index 000000000000..544d60cfc32e
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami.dtsi
@@ -0,0 +1,250 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 Lukas Schmid <lukas.schmid@netcube.li>
+ */
+
+/dts-v1/;
+#include "sun8i-t113s.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "NetCube Systems Nagami SoM";
+	compatible = "netcube,nagami", "allwinner,sun8i-t113s";
+
+	aliases {
+		serial1 = &uart1; // ESP32 Bootloader UART
+		serial3 = &uart3; // Console UART on Card Edge
+		ethernet0 = &emac;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	/* module wide 3.3V supply directly from the card edge */
+	reg_vcc3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	/* SY8008 DC/DC regulator on the board, also supplying VDD-SYS */
+	reg_vcc_core: regulator-core {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-core";
+		regulator-min-microvolt = <880000>;
+		regulator-max-microvolt = <880000>;
+		vin-supply = <&reg_vcc3v3>;
+	};
+
+	/* USB0 MUX to switch connect to Card-Edge only after BootROM */
+	usb0_sec_mux: mux-controller{
+		compatible = "gpio-mux";
+		#mux-control-cells = <0>;
+		mux-gpios = <&pio 3 9 GPIO_ACTIVE_HIGH>; /* PD9 */
+		idle-state = <1>; /* USB connected to Card-Edge by default */
+	};
+
+	/* Reset of ESP32 */
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 6 9 GPIO_ACTIVE_LOW>; /* PG9 */
+		post-power-on-delay-ms = <1500>;
+		power-off-delay-us = <200>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vcc_core>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_vcc_core>;
+};
+
+&dcxo {
+	clock-frequency = <24000000>;
+};
+
+&emac {
+	nvmem-cells = <&eth0_macaddress>;
+	nvmem-cell-names = "mac-address";
+	phy-handle = <&lan8720a>;
+	phy-mode = "rmii";
+	pinctrl-0 = <&rmii_pe_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* Default I2C Interface on Card-Edge */
+&i2c2 {
+	pinctrl-0 = <&i2c2_pd_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+/* Exposed as the QWIIC connector and used by the internal EEPROM */
+&i2c3 {
+	pinctrl-0 = <&i2c3_pg_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	eeprom0: eeprom@50 {
+		compatible = "atmel,24c02";		/* actually it's a 24AA02E48 */
+		reg = <0x50>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&reg_vcc3v3>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		eth0_macaddress: macaddress@fa {
+			reg = <0xfa 0x06>;
+		};
+	};
+};
+
+/* Default I2S Interface on Card-Edge */
+&i2s1 {
+	pinctrl-0 = <&i2s1_pins>, <&i2s1_din0_pin>, <&i2s1_dout0_pin>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+/* Phy is on SoM. MDI signals pre-magnetics are on the card edge */
+&mdio {
+	lan8720a: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+/* Default SD Interface on Card-Edge */
+&mmc0 {
+	pinctrl-0 = <&mmc0_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+/* Connected to the on-board ESP32 */
+&mmc1 {
+	pinctrl-0 = <&mmc1_pins>;
+	pinctrl-names = "default";
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	status = "okay";
+};
+
+/* Connected to the on-board eMMC */
+&mmc2 {
+	pinctrl-0 = <&mmc2_pins>;
+	pinctrl-names = "default";
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_vcc3v3>;
+	vcc-pc-supply = <&reg_vcc3v3>;
+	vcc-pd-supply = <&reg_vcc3v3>;
+	vcc-pe-supply = <&reg_vcc3v3>;
+	vcc-pf-supply = <&reg_vcc3v3>;
+	vcc-pg-supply = <&reg_vcc3v3>;
+
+	gpio-line-names = "", "", "", "", // PA
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "CAN0_TX", "CAN0_RX", // PB
+			  "CAN1_TX", "CAN1_RX", "UART3_TX", "UART3_RX",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "eMMC_CLK", "eMMC_CMD", // PC
+			  "eMMC_D2", "eMMC_D1", "eMMC_D0", "eMMC_D3",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "", // PD
+			  "", "", "", "",
+			  "", "USB_SEC_EN", "SPI1_CS", "SPI1_CLK",
+			  "SPI1_MOSI", "SPI1_MISO", "SPI1_HOLD", "SPI1_WP",
+			  "PD16", "", "", "",
+			  "I2C2_SCL", "I2C2_SDA", "PD22", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "ETH_CRSDV", "ETH_RXD0", "ETH_RXD1", "ETH_TXCK", // PE
+			  "ETH_TXD0", "ETH_TXD1", "ETH_TXEN", "",
+			  "ETH_MDC", "ETH_MDIO", "QWIIC_nINT", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "SD_D1", "SD_D0", "SD_CLK", "SD_CLK", // PF
+			  "SD_D3", "SD_D2", "PF6", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "ESP_CLK", "ESP_CMD", "ESP_D0", "ESP_D1", // PG
+			  "ESP_D2", "ESP_D3", "UART1_TXD", "UART1_RXD",
+			  "ESP_nBOOT", "ESP_nRST", "I2C3_SCL", "I2C3_SDA",
+			  "I2S1_WS", "I2S1_CLK", "I2S1_DIN0", "I2S1_DOUT0",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+/* Remove the unused CK pin from the pinctl as it is unconnected */
+&rmii_pe_pins {
+	pins = "PE0", "PE1", "PE2", "PE3", "PE4",
+	       "PE5", "PE6", "PE8", "PE9";
+};
+
+/* Default SPI Interface on Card-Edge */
+&spi1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-0 = <&spi1_pins>, <&spi1_hold_pin>, <&spi1_wp_pin>;
+	pinctrl-names = "default";
+	cs-gpios = <0>;
+	status = "disabled";
+};
+
+/* Connected to the Bootloader/Console of the ESP32 */
+&uart1 {
+	pinctrl-0 = <&uart1_pg6_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* Console/Debug UART on Card-Edge */
+&uart3 {
+	pinctrl-0 = <&uart3_pb_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-t113s.dtsi b/arch/arm/boot/dts/allwinner/sun8i-t113s.dtsi
new file mode 100644
index 000000000000..c7181308ae6f
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-t113s.dtsi
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2022 Arm Ltd.
+
+#define SOC_PERIPHERAL_IRQ(nr) GIC_SPI nr
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <riscv/allwinner/sunxi-d1s-t113.dtsi>
+#include <riscv/allwinner/sunxi-d1-t113.dtsi>
+
+/ {
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+		};
+	};
+
+	gic: interrupt-controller@1c81000 {
+		compatible = "arm,gic-400";
+		reg = <0x03021000 0x1000>,
+		      <0x03022000 0x2000>,
+		      <0x03024000 0x2000>,
+		      <0x03026000 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupt-controller;
+		#interrupt-cells = <3>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+};
diff --git a/arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts b/arch/arm/boot/dts/allwinner/sun8i-t3-cqa3t-bv3.dts
index 6931aaab2382..9f472521f4a4 100644
--- a/arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-t3-cqa3t-bv3.dts
@@ -45,6 +45,7 @@
 
 /dts-v1/;
 #include "sun8i-r40.dtsi"
+#include "sun8i-r40-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 
@@ -88,6 +89,10 @@
 	status = "okay";
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &de {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun8i-v3-sl631-imx179.dts b/arch/arm/boot/dts/allwinner/sun8i-v3-sl631-imx179.dts
index 117aeece4e55..117aeece4e55 100644
--- a/arch/arm/boot/dts/sun8i-v3-sl631-imx179.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3-sl631-imx179.dts
diff --git a/arch/arm/boot/dts/sun8i-v3-sl631.dtsi b/arch/arm/boot/dts/allwinner/sun8i-v3-sl631.dtsi
index e0d2a31efc7f..6f93f8c49f84 100644
--- a/arch/arm/boot/dts/sun8i-v3-sl631.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3-sl631.dtsi
@@ -115,7 +115,7 @@
 &spi0 {
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		reg = <0>;
 		compatible = "jedec,spi-nor";
 		spi-max-frequency = <50000000>;
diff --git a/arch/arm/boot/dts/sun8i-v3.dtsi b/arch/arm/boot/dts/allwinner/sun8i-v3.dtsi
index 186c30cbe6ee..95bd0b616349 100644
--- a/arch/arm/boot/dts/sun8i-v3.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3.dtsi
@@ -56,6 +56,15 @@
 		function = "i2s";
 	};
 
+	/omit-if-no-ref/
+	lcd_rgb666_pd_pins: lcd-rgb666-pd-pins {
+		pins = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5",
+		       "PD6", "PD7", "PD8", "PD9", "PD10", "PD11",
+		       "PD12", "PD13", "PD14", "PD15", "PD16", "PD17",
+		       "PD18", "PD19", "PD20", "PD21";
+		function = "lcd";
+	};
+
 	uart1_pg_pins: uart1-pg-pins {
 		pins = "PG6", "PG7";
 		function = "uart1";
diff --git a/arch/arm/boot/dts/allwinner/sun8i-v3s-anbernic-rg-nano.dts b/arch/arm/boot/dts/allwinner/sun8i-v3s-anbernic-rg-nano.dts
new file mode 100644
index 000000000000..f34dfdf1566d
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3s-anbernic-rg-nano.dts
@@ -0,0 +1,276 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
+#include "sun8i-v3s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+/ {
+	model = "Anbernic RG Nano";
+	compatible = "anbernic,rg-nano", "allwinner,sun8i-v3s";
+
+	aliases {
+		rtc0 = &pcf8563;
+		rtc1 = &rtc;
+		serial0 = &uart0;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 1 2 3 8 14 21 32 46 60 80 100>;
+		default-brightness-level = <11>;
+		power-supply = <&reg_vcc5v0>;
+		pwms = <&pwm 0 40000 1>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		button-a {
+			gpios = <&gpio_expander 12 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "BTN-A";
+			linux,code = <BTN_EAST>;
+		};
+
+		button-b {
+			gpios = <&gpio_expander 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "BTN-B";
+			linux,code = <BTN_SOUTH>;
+		};
+
+		button-down {
+			gpios = <&gpio_expander 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "DPAD-DOWN";
+			linux,code = <BTN_DPAD_DOWN>;
+		};
+
+		button-left {
+			gpios = <&gpio_expander 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "DPAD-LEFT";
+			linux,code = <BTN_DPAD_LEFT>;
+		};
+
+		button-right {
+			gpios = <&gpio_expander 0 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "DPAD-RIGHT";
+			linux,code = <BTN_DPAD_RIGHT>;
+		};
+
+		button-se {
+			gpios = <&gpio_expander 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "BTN-SELECT";
+			linux,code = <BTN_SELECT>;
+		};
+
+		button-st {
+			gpios = <&gpio_expander 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "BTN-START";
+			linux,code = <BTN_START>;
+		};
+
+		button-tl {
+			gpios = <&gpio_expander 2 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "BTN-L";
+			linux,code = <BTN_TL>;
+		};
+
+		button-tr {
+			gpios = <&gpio_expander 15 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "BTN-R";
+			linux,code = <BTN_TR>;
+		};
+
+		button-up {
+			gpios = <&gpio_expander 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "DPAD-UP";
+			linux,code = <BTN_DPAD_UP>;
+		};
+
+		button-x {
+			gpios = <&gpio_expander 11 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "BTN-X";
+			linux,code = <BTN_NORTH>;
+		};
+
+		button-y {
+			gpios = <&gpio_expander 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "BTN-Y";
+			linux,code = <BTN_WEST>;
+		};
+	};
+};
+
+&codec {
+	allwinner,audio-routing = "Speaker", "HP",
+				  "MIC1", "Mic",
+				  "Mic", "HBIAS";
+	allwinner,pa-gpios = <&pio 5 6 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PF6 */
+	status = "okay";
+};
+
+&ehci {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	gpio_expander: gpio@20 {
+		compatible = "nxp,pcal6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupt-parent = <&pio>;
+		interrupts = <1 3 IRQ_TYPE_EDGE_BOTH>; /* PB3/EINT3 */
+		vcc-supply = <&reg_vcc3v3>;
+	};
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&pio>;
+		interrupts = <1 5 IRQ_TYPE_EDGE_FALLING>; /* PB5/EINT5 */
+	};
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&mmc0 {
+	broken-cd;
+	bus-width = <4>;
+	disable-wp;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_vcc3v3>;
+	vcc-pc-supply = <&reg_vcc3v3>;
+	vcc-pf-supply = <&reg_vcc3v3>;
+	vcc-pg-supply = <&reg_vcc3v3>;
+
+	spi0_no_miso_pins: spi0-no-miso-pins {
+		pins = "PC1", "PC2", "PC3";
+		function = "spi0";
+	};
+};
+
+&pwm {
+	pinctrl-0 = <&pwm0_pin>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* DCDC2 wired into vdd-cpu, vdd-sys, and vdd-ephy. */
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-max-microvolt = <1250000>;
+	regulator-min-microvolt = <1250000>;
+	regulator-name = "vdd-cpu";
+};
+
+/* DCDC3 wired into every 3.3v input that isn't the RTC. */
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-max-microvolt = <3300000>;
+	regulator-min-microvolt = <3300000>;
+	regulator-name = "vcc-io";
+};
+
+/* LDO1 wired into RTC, voltage is hard-wired at 3.3v. */
+&reg_ldo1 {
+	regulator-always-on;
+	regulator-name = "vcc-rtc";
+};
+
+/* LDO2 wired into VCC-PLL and audio codec. */
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-max-microvolt = <3000000>;
+	regulator-min-microvolt = <3000000>;
+	regulator-name = "vcc-pll";
+};
+
+/* LDO3, LDO4, and LDO5 unused. */
+&reg_ldo3 {
+	status = "disabled";
+};
+
+&reg_ldo4 {
+	status = "disabled";
+};
+
+/* RTC uses internal oscillator */
+&rtc {
+	/delete-property/ clocks;
+};
+
+&spi0 {
+	pinctrl-0 = <&spi0_no_miso_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	display@0 {
+		compatible = "saef,sftc154b", "panel-mipi-dbi-spi";
+		reg = <0>;
+		backlight = <&backlight>;
+		dc-gpios = <&pio 2 0 GPIO_ACTIVE_HIGH>; /* PC0 */
+		reset-gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
+		spi-max-frequency = <100000000>;
+
+		height-mm = <39>;
+		width-mm = <39>;
+
+		/* Set hb-porch to compensate for non-visible area */
+		panel-timing {
+			hactive = <240>;
+			vactive = <240>;
+			hback-porch = <80>;
+			vback-porch = <0>;
+			clock-frequency = <0>;
+			hfront-porch = <0>;
+			hsync-len = <0>;
+			vfront-porch = <0>;
+			vsync-len = <0>;
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pb_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PG5 */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts b/arch/arm/boot/dts/allwinner/sun8i-v3s-licheepi-zero-dock.dts
index 752ad05c8f83..752ad05c8f83 100644
--- a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3s-licheepi-zero-dock.dts
diff --git a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts b/arch/arm/boot/dts/allwinner/sun8i-v3s-licheepi-zero.dts
index 2e4587d26ce5..2e4587d26ce5 100644
--- a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3s-licheepi-zero.dts
diff --git a/arch/arm/boot/dts/allwinner/sun8i-v3s-netcube-kumquat.dts b/arch/arm/boot/dts/allwinner/sun8i-v3s-netcube-kumquat.dts
new file mode 100644
index 000000000000..cb6292319f39
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3s-netcube-kumquat.dts
@@ -0,0 +1,276 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 Lukas Schmid <lukas.schmid@netcube.li>
+ */
+
+/dts-v1/;
+#include "sun8i-v3s.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/{
+	model = "NetCube Systems Kumquat";
+	compatible = "netcube,kumquat", "allwinner,sun8i-v3s";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &emac;
+		rtc0 = &ds3232;
+		rtc1 = &rtc; /* not battery backed */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	/* 40 MHz Crystal Oscillator on PCB */
+	clk_can0: clock-can0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <40000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		key-user {
+			label = "GPIO Key User";
+			linux,code = <KEY_PROG1>;
+			gpios = <&pio 1 2 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PB2 */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-heartbeat {
+			gpios = <&pio 4 4 GPIO_ACTIVE_HIGH>; /* PE4 */
+			linux,default-trigger = "heartbeat";
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_HEARTBEAT;
+		};
+
+		led-mmc0-act {
+			gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+			linux,default-trigger = "mmc0";
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DISK;
+		};
+	};
+
+	/* EA3036C Switching 3 Channel Regulator - Channel 2 */
+	reg_vcc3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vcc5v0>;
+	};
+
+	/* K7805-1000R3 Switching Regulator supplied from main 12/24V terminal block */
+	reg_vcc5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Headphone", "HP",
+		"Headphone", "HPCOM",
+		"MIC1", "Mic",
+		"Mic", "HBIAS";
+	status = "okay";
+};
+
+&ehci {
+	status = "okay";
+};
+
+&emac {
+	allwinner,leds-active-low;
+	nvmem-cells = <&eth0_macaddress>;
+	nvmem-cell-names = "mac-address";
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom0: eeprom@50 {
+		compatible = "atmel,24c02";		/* actually it's a 24AA02E48 */
+		reg = <0x50>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&reg_vcc3v3>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		eth0_macaddress: macaddress@fa {
+			reg = <0xfa 0x06>;
+		};
+	};
+
+	tusb320: typec@60 {
+		compatible = "ti,tusb320";
+		reg = <0x60>;
+		interrupts-extended = <&pio 1 5 IRQ_TYPE_LEVEL_LOW>;  /* PB5 */
+	};
+
+	ds3232: rtc@68 {
+		compatible = "dallas,ds3232";
+		reg = <0x68>;
+	};
+};
+
+/* Exposed as the Flash/SD Header on the board */
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	broken-cd;
+	status = "okay";
+};
+
+/* Connected to the on-board ESP32 */
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	broken-cd;
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+/* Disable external 32k osc as it is broken on current revision */
+&osc32k {
+	status = "disabled";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_vcc3v3>;
+	vcc-pc-supply = <&reg_vcc3v3>;
+	vcc-pe-supply = <&reg_vcc3v3>;
+	vcc-pf-supply = <&reg_vcc3v3>;
+	vcc-pg-supply = <&reg_vcc3v3>;
+
+	gpio-line-names = "", "", "", "", // PA
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "CAN_nCS", "CAN_nINT", "USER_SW", "PB3", // PB
+			  "USB_ID", "USBC_nINT", "I2C0_SCL", "I2C0_SDA",
+			  "UART0_TX", "UART0_RX", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "SPI_MISO", "SPI_SCK", "FLASH_nCS", "SPI_MOSI", // PC
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "", // PD
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "Q12", "Q11", "Q10", "Q9", // PE
+			  "LED_SYS0", "I1", "Q1", "Q2",
+			  "I2", "I3", "Q3", "Q4",
+			  "I4", "I5", "Q5", "Q6",
+			  "I6", "I7", "Q7", "Q8",
+			  "I8", "UART1_TXD", "UART1_RXD", "ESP_nRST",
+			  "ESP_nBOOT", "", "", "",
+			  "", "", "", "",
+			  "SD_D1", "SD_D0", "SD_CLK", "SD_CMD", // PF
+			  "SD_D3", "SD_D2", "LED_SYS1", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "ESP_CLK", "ESP_CMD", "ESP_D0", "ESP_D1", // PG
+			  "ESP_D2", "ESP_D3", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+/* Disable external 32k osc as it is broken on current revision */
+&rtc {
+	/delete-property/ clocks;
+};
+
+/* Exposed as a USB-C connector with USB-Serial converter */
+&uart0 {
+	pinctrl-0 = <&uart0_pb_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* Connected to the Bootloader/Console of the ESP32 */
+&uart1 {
+	pinctrl-0 = <&uart1_pe_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb_otg {
+	extcon = <&tusb320 0>;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+	status = "okay";
+};
+
+&spi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cs-gpios = <0>, <&pio 1 0 GPIO_ACTIVE_LOW>; /* PB0 */
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		label = "firmware";
+		spi-max-frequency = <40000000>;
+	};
+
+	can@1 {
+		compatible = "microchip,mcp2518fd";
+		reg = <1>;
+		clocks = <&clk_can0>;
+		interrupts-extended = <&pio 1 1 IRQ_TYPE_LEVEL_LOW>;  /* PB1 */
+		spi-max-frequency = <20000000>;
+		vdd-supply = <&reg_vcc3v3>;
+		xceiver-supply = <&reg_vcc3v3>;
+	};
+};
diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi
index b30bc1a25ebb..fa54510319ac 100644
--- a/arch/arm/boot/dts/sun8i-v3s.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi
@@ -42,6 +42,7 @@
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
 #include <dt-bindings/clock/sun8i-v3s-ccu.h>
 #include <dt-bindings/reset/sun8i-v3s-ccu.h>
 #include <dt-bindings/clock/sun8i-de2.h>
@@ -97,7 +98,7 @@
 		#size-cells = <1>;
 		ranges;
 
-		osc24M: osc24M_clk {
+		osc24M: osc24M-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <24000000>;
@@ -105,7 +106,7 @@
 			clock-output-names = "osc24M";
 		};
 
-		osc32k: osc32k_clk {
+		osc32k: osc32k-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <32768>;
@@ -190,7 +191,7 @@
 				 <&ccu CLK_TCON0>;
 			clock-names = "ahb",
 				      "tcon-ch0";
-			clock-output-names = "tcon-pixel-clock";
+			clock-output-names = "tcon-data-clock";
 			#clock-cells = <0>;
 			resets = <&ccu RST_BUS_TCON0>;
 			reset-names = "lcd";
@@ -318,10 +319,33 @@
 			#phy-cells = <1>;
 		};
 
+		ehci: usb@1c1a000 {
+			compatible = "allwinner,sun8i-v3s-ehci", "generic-ehci";
+			reg = <0x01c1a000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>;
+			resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci: usb@1c1a400 {
+			compatible = "allwinner,sun8i-v3s-ohci", "generic-ohci";
+			reg = <0x01c1a400 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
 		ccu: clock@1c20000 {
 			compatible = "allwinner,sun8i-v3s-ccu";
 			reg = <0x01c20000 0x400>;
-			clocks = <&osc24M>, <&rtc 0>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
 			clock-names = "hosc", "losc";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -342,7 +366,8 @@
 			reg = <0x01c20800 0x400>;
 			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			#gpio-cells = <3>;
@@ -386,11 +411,26 @@
 				function = "i2c1";
 			};
 
+			/omit-if-no-ref/
+			lcd_rgb666_pe_pins: lcd-rgb666-pe-pins {
+				pins = "PE0", "PE1", "PE2", "PE3", "PE4", "PE5",
+				       "PE6", "PE7", "PE8", "PE9", "PE10", "PE11",
+				       "PE12", "PE13", "PE14", "PE15", "PE16", "PE17",
+				       "PE18", "PE19", "PE23", "PE24";
+				function = "lcd";
+			};
+
 			uart0_pb_pins: uart0-pb-pins {
 				pins = "PB8", "PB9";
 				function = "uart0";
 			};
 
+			/omit-if-no-ref/
+			uart1_pe_pins: uart1-pe-pins {
+				pins = "PE21", "PE22";
+				function = "uart1";
+			};
+
 			uart2_pins: uart2-pins {
 				pins = "PB0", "PB1";
 				function = "uart2";
@@ -412,6 +452,18 @@
 				bias-pull-up;
 			};
 
+			/omit-if-no-ref/
+			pwm0_pin: pwm0-pin {
+				pins = "PB4";
+				function = "pwm0";
+			};
+
+			/omit-if-no-ref/
+			pwm1_pin: pwm1-pin {
+				pins = "PB5";
+				function = "pwm1";
+			};
+
 			spi0_pins: spi0-pins {
 				pins = "PC0", "PC1", "PC2", "PC3";
 				function = "spi0";
@@ -477,7 +529,7 @@
 			reg-io-width = <4>;
 			clocks = <&ccu CLK_BUS_UART0>;
 			dmas = <&dma 6>, <&dma 6>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			resets = <&ccu RST_BUS_UART0>;
 			status = "disabled";
 		};
@@ -490,7 +542,7 @@
 			reg-io-width = <4>;
 			clocks = <&ccu CLK_BUS_UART1>;
 			dmas = <&dma 7>, <&dma 7>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			resets = <&ccu RST_BUS_UART1>;
 			status = "disabled";
 		};
@@ -503,7 +555,7 @@
 			reg-io-width = <4>;
 			clocks = <&ccu CLK_BUS_UART2>;
 			dmas = <&dma 8>, <&dma 8>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			resets = <&ccu RST_BUS_UART2>;
 			pinctrl-0 = <&uart2_pins>;
 			pinctrl-names = "default";
@@ -593,18 +645,6 @@
 			#size-cells = <0>;
 		};
 
-		csi1: camera@1cb4000 {
-			compatible = "allwinner,sun8i-v3s-csi";
-			reg = <0x01cb4000 0x3000>;
-			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_BUS_CSI>,
-				 <&ccu CLK_CSI1_SCLK>,
-				 <&ccu CLK_DRAM_CSI>;
-			clock-names = "bus", "mod", "ram";
-			resets = <&ccu RST_BUS_CSI>;
-			status = "disabled";
-		};
-
 		gic: interrupt-controller@1c81000 {
 			compatible = "arm,gic-400";
 			reg = <0x01c81000 0x1000>,
@@ -615,5 +655,17 @@
 			#interrupt-cells = <3>;
 			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
+
+		csi1: camera@1cb4000 {
+			compatible = "allwinner,sun8i-v3s-csi";
+			reg = <0x01cb4000 0x3000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CSI>,
+				 <&ccu CLK_CSI_SCLK>,
+				 <&ccu CLK_DRAM_CSI>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_CSI>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/boot/dts/allwinner/sun8i-v40-bananapi-m2-berry.dts
index 47954551f573..6575ef274453 100644
--- a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-v40-bananapi-m2-berry.dts
@@ -42,6 +42,7 @@
 
 /dts-v1/;
 #include "sun8i-r40.dtsi"
+#include "sun8i-r40-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 
@@ -93,7 +94,7 @@
 		enable-active-high;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */
 		clocks = <&ccu CLK_OUTA>;
@@ -107,6 +108,10 @@
 	status = "okay";
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &de {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/allwinner/sun9i-a80-cubieboard4.dts
index 1fe251ea94bc..52ad95a2063a 100644
--- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
+++ b/arch/arm/boot/dts/allwinner/sun9i-a80-cubieboard4.dts
@@ -87,7 +87,7 @@
 	};
 
 	vga-dac {
-		compatible = "corpro,gm7123", "adi,adv7123", "dumb-vga-dac";
+		compatible = "corpro,gm7123", "adi,adv7123";
 		vdd-supply = <&reg_dcdc1>;
 
 		ports {
@@ -280,8 +280,8 @@
 
 			reg_dcdc5: dcdc5 {
 				regulator-always-on;
-				regulator-min-microvolt = <1425000>;
-				regulator-max-microvolt = <1575000>;
+				regulator-min-microvolt = <1450000>;
+				regulator-max-microvolt = <1550000>;
 				regulator-name = "vcc-dram";
 			};
 
diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/allwinner/sun9i-a80-optimus.dts
index 5c3580d712e4..5c3580d712e4 100644
--- a/arch/arm/boot/dts/sun9i-a80-optimus.dts
+++ b/arch/arm/boot/dts/allwinner/sun9i-a80-optimus.dts
diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/allwinner/sun9i-a80.dtsi
index ce4fa6706d06..a1ae0929cec9 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun9i-a80.dtsi
@@ -196,14 +196,14 @@
 		 * The actual TX clock rate is not controlled by the
 		 * gmac_tx clock.
 		 */
-		mii_phy_tx_clk: mii_phy_tx_clk {
+		mii_phy_tx_clk: mii-phy-tx-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <25000000>;
 			clock-output-names = "mii_phy_tx";
 		};
 
-		gmac_int_tx_clk: gmac_int_tx_clk {
+		gmac_int_tx_clk: gmac-int-tx-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <125000000>;
@@ -1218,7 +1218,6 @@
 				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&apbs_gates 0>, <&osc24M>, <&osc32k>;
 			clock-names = "apb", "hosc", "losc";
-			resets = <&apbs_rst 0>;
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;
diff --git a/arch/arm/boot/dts/allwinner/suniv-f1c100s-licheepi-nano.dts b/arch/arm/boot/dts/allwinner/suniv-f1c100s-licheepi-nano.dts
new file mode 100644
index 000000000000..472ded0aafcf
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/suniv-f1c100s-licheepi-nano.dts
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright 2018 Icenowy Zheng <icenowy@aosc.io>
+ */
+
+/dts-v1/;
+#include "suniv-f1c100s.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Lichee Pi Nano";
+	compatible = "licheepi,licheepi-nano", "allwinner,suniv-f1c100s";
+
+	aliases {
+		mmc0 = &mmc0;
+		serial0 = &uart0;
+		spi0 = &spi0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&mmc0 {
+	broken-cd;
+	bus-width = <4>;
+	disable-wp;
+	status = "okay";
+	vmmc-supply = <&reg_vcc3v3>;
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pc_pins>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "winbond,w25q128", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pe_pins>;
+	status = "okay";
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Headphone", "HP",
+		"Headphone", "HPCOM",
+		"MIC", "Mic";
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 4 2 GPIO_ACTIVE_HIGH>; /* PE2 */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/suniv-f1c100s.dtsi b/arch/arm/boot/dts/allwinner/suniv-f1c100s.dtsi
new file mode 100644
index 000000000000..e4b41bc93852
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/suniv-f1c100s.dtsi
@@ -0,0 +1,354 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright 2018 Icenowy Zheng <icenowy@aosc.io>
+ * Copyright 2018 Mesih Kilinc <mesihkilinc@gmail.com>
+ */
+
+#include <dt-bindings/clock/suniv-ccu-f1c100s.h>
+#include <dt-bindings/reset/suniv-ccu-f1c100s.h>
+#include <dt-bindings/dma/sun4i-a10.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&intc>;
+
+	clocks {
+		osc24M: clk-24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: clk-32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0x0>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		sram-controller@1c00000 {
+			compatible = "allwinner,suniv-f1c100s-system-control",
+				     "allwinner,sun4i-a10-system-control";
+			reg = <0x01c00000 0x30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_d: sram@10000 {
+				compatible = "mmio-sram";
+				reg = <0x00010000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00010000 0x1000>;
+
+				otg_sram: sram-section@0 {
+					compatible = "allwinner,suniv-f1c100s-sram-d",
+						     "allwinner,sun4i-a10-sram-d";
+					reg = <0x0000 0x1000>;
+					status = "disabled";
+				};
+			};
+		};
+
+		spi0: spi@1c05000 {
+			compatible = "allwinner,suniv-f1c100s-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c05000 0x1000>;
+			interrupts = <10>;
+			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_BUS_SPI0>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI0>;
+			status = "disabled";
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@1c06000 {
+			compatible = "allwinner,suniv-f1c100s-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c06000 0x1000>;
+			interrupts = <11>;
+			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_BUS_SPI1>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI1>;
+			status = "disabled";
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,suniv-f1c100s-mmc",
+				     "allwinner,sun7i-a20-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>,
+				 <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <23>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,suniv-f1c100s-mmc",
+				     "allwinner,sun7i-a20-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>,
+				 <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <24>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usb_otg: usb@1c13000 {
+			compatible = "allwinner,suniv-f1c100s-musb";
+			reg = <0x01c13000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <26>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			allwinner,sram = <&otg_sram 1>;
+			status = "disabled";
+		};
+
+		usbphy: phy@1c13400 {
+			compatible = "allwinner,suniv-f1c100s-usb-phy";
+			reg = <0x01c13400 0x10>;
+			reg-names = "phy_ctrl";
+			clocks = <&ccu CLK_USB_PHY0>;
+			clock-names = "usb0_phy";
+			resets = <&ccu RST_USB_PHY0>;
+			reset-names = "usb0_reset";
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,suniv-f1c100s-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <18>;
+			clocks = <&ccu CLK_BUS_DMA>;
+			resets = <&ccu RST_BUS_DMA>;
+			#dma-cells = <2>;
+		};
+
+		ccu: clock@1c20000 {
+			compatible = "allwinner,suniv-f1c100s-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&osc32k>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		intc: interrupt-controller@1c20400 {
+			compatible = "allwinner,suniv-f1c100s-ic";
+			reg = <0x01c20400 0x400>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			compatible = "allwinner,suniv-f1c100s-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <38>, <39>, <40>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+			};
+
+			/omit-if-no-ref/
+			i2c0_pd_pins: i2c0-pd-pins {
+				pins = "PD0", "PD12";
+				function = "i2c0";
+			};
+
+			spi0_pc_pins: spi0-pc-pins {
+				pins = "PC0", "PC1", "PC2", "PC3";
+				function = "spi0";
+			};
+
+			uart0_pe_pins: uart0-pe-pins {
+				pins = "PE0", "PE1";
+				function = "uart0";
+			};
+
+			/omit-if-no-ref/
+			uart1_pa_pins: uart1-pa-pins {
+				pins = "PA2", "PA3";
+				function = "uart1";
+			};
+		};
+
+		i2c0: i2c@1c27000 {
+			compatible = "allwinner,suniv-f1c100s-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01c27000 0x400>;
+			interrupts = <7>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@1c27400 {
+			compatible = "allwinner,suniv-f1c100s-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01c27400 0x400>;
+			interrupts = <8>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@1c27800 {
+			compatible = "allwinner,suniv-f1c100s-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01c27800 0x400>;
+			interrupts = <9>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,suniv-f1c100s-timer";
+			reg = <0x01c20c00 0x90>;
+			interrupts = <13>, <14>, <15>;
+			clocks = <&osc24M>;
+		};
+
+		wdt: watchdog@1c20ca0 {
+			compatible = "allwinner,suniv-f1c100s-wdt",
+				     "allwinner,sun6i-a31-wdt";
+			reg = <0x01c20ca0 0x20>;
+			interrupts = <16>;
+			clocks = <&osc32k>;
+		};
+
+		pwm: pwm@1c21000 {
+			compatible = "allwinner,suniv-f1c100s-pwm",
+				     "allwinner,sun7i-a20-pwm";
+			reg = <0x01c21000 0x400>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		ir: ir@1c22c00 {
+			compatible = "allwinner,suniv-f1c100s-ir",
+				     "allwinner,sun6i-a31-ir";
+			reg = <0x01c22c00 0x400>;
+			clocks = <&ccu CLK_BUS_IR>, <&ccu CLK_IR>;
+			clock-names = "apb", "ir";
+			resets = <&ccu RST_BUS_IR>;
+			interrupts = <6>;
+			status = "disabled";
+		};
+
+		lradc: lradc@1c23400 {
+			compatible = "allwinner,suniv-f1c100s-lradc",
+				     "allwinner,sun8i-a83t-r-lradc";
+			reg = <0x01c23400 0x400>;
+			interrupts = <22>;
+			status = "disabled";
+		};
+
+		uart0: serial@1c25000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c25000 0x400>;
+			interrupts = <1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@1c25400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c25400 0x400>;
+			interrupts = <2>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@1c25800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c25800 0x400>;
+			interrupts = <3>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			status = "disabled";
+		};
+
+		codec: codec@1c23c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,suniv-f1c100s-codec";
+			reg = <0x01c23c00 0x400>;
+			interrupts = <21>;
+			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_CODEC>;
+			clock-names = "apb", "codec";
+			dmas = <&dma SUN4I_DMA_NORMAL 12>,
+			       <&dma SUN4I_DMA_NORMAL 12>;
+			dma-names = "rx", "tx";
+			resets = <&ccu RST_BUS_CODEC>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/suniv-f1c200s-lctech-pi.dts b/arch/arm/boot/dts/allwinner/suniv-f1c200s-lctech-pi.dts
new file mode 100644
index 000000000000..2d2a3f026df3
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/suniv-f1c200s-lctech-pi.dts
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Arm Ltd,
+ * based on work:
+ *   Copyright 2022 Icenowy Zheng <uwu@icenowy.me>
+ */
+
+/dts-v1/;
+#include "suniv-f1c100s.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Lctech Pi F1C200s";
+	compatible = "lctech,pi-f1c200s", "allwinner,suniv-f1c200s",
+		     "allwinner,suniv-f1c100s";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_vcc3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&mmc0 {
+	broken-cd;
+	bus-width = <4>;
+	disable-wp;
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pc_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pa_pins>;
+	status = "okay";
+};
+
+/*
+ * This is a Type-C socket, but CC1/2 are not connected, and VBUS is connected
+ * to Vin, which supplies the board. Host mode works (if the board is powered
+ * otherwise), but peripheral is probably the intention.
+ */
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/suniv-f1c200s-popstick-v1.1.dts b/arch/arm/boot/dts/allwinner/suniv-f1c200s-popstick-v1.1.dts
new file mode 100644
index 000000000000..184c245041a6
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/suniv-f1c200s-popstick-v1.1.dts
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Icenowy Zheng <uwu@icenowy.me>
+ */
+
+/dts-v1/;
+#include "suniv-f1c100s.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Popcorn Computer PopStick v1.1";
+	compatible = "sourceparts,popstick-v1.1", "sourceparts,popstick",
+		     "allwinner,suniv-f1c200s", "allwinner,suniv-f1c100s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 4 6 GPIO_ACTIVE_HIGH>; /* PE6 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_vcc3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&mmc0 {
+	cd-gpios = <&pio 4 3 GPIO_ACTIVE_LOW>; /* PE3 */
+	bus-width = <4>;
+	disable-wp;
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pc_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pe_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi b/arch/arm/boot/dts/allwinner/sunxi-bananapi-m2-plus-v1.2.dtsi
index 235994a4a2eb..235994a4a2eb 100644
--- a/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi
+++ b/arch/arm/boot/dts/allwinner/sunxi-bananapi-m2-plus-v1.2.dtsi
diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi b/arch/arm/boot/dts/allwinner/sunxi-bananapi-m2-plus.dtsi
index 7a6af54dd342..873817ddb4ea 100644
--- a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
+++ b/arch/arm/boot/dts/allwinner/sunxi-bananapi-m2-plus.dtsi
@@ -77,30 +77,31 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		sw4 {
+		switch-4 {
 			label = "power";
-			linux,code = <BTN_0>;
+			linux,code = <KEY_POWER>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
 		};
 	};
 
 	reg_gmac_3v3: gmac-3v3 {
-		      compatible = "regulator-fixed";
-		      regulator-name = "gmac-3v3";
-		      regulator-min-microvolt = <3300000>;
-		      regulator-max-microvolt = <3300000>;
-		      startup-delay-us = <100000>;
-		      enable-active-high;
-		      gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "ext_clock";
 	};
 };
@@ -220,7 +221,7 @@
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
 		max-speed = <1500000>;
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "lpo";
 		vbat-supply = <&reg_vcc3v3>;
 		vddio-supply = <&reg_vcc3v3>;
diff --git a/arch/arm/boot/dts/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/allwinner/sunxi-common-regulators.dtsi
index d8e5826fb3de..d8e5826fb3de 100644
--- a/arch/arm/boot/dts/sunxi-common-regulators.dtsi
+++ b/arch/arm/boot/dts/allwinner/sunxi-common-regulators.dtsi
diff --git a/arch/arm/boot/dts/allwinner/sunxi-d1s-t113-mangopi-mq-r.dtsi b/arch/arm/boot/dts/allwinner/sunxi-d1s-t113-mangopi-mq-r.dtsi
new file mode 100644
index 000000000000..a415c4a78a70
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sunxi-d1s-t113-mangopi-mq-r.dtsi
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2022 Arm Ltd.
+/*
+ * Common peripherals and configurations for MangoPi MQ-R boards.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&pio 3 22 GPIO_ACTIVE_LOW>; /* PD22 */
+		};
+	};
+
+	/* board wide 5V supply directly from the USB-C socket */
+	reg_vcc5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	/* SY8008 DC/DC regulator on the board */
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vcc5v>;
+	};
+
+	/* SY8008 DC/DC regulator on the board, also supplying VDD-SYS */
+	reg_vcc_core: regulator-core {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-core";
+		regulator-min-microvolt = <880000>;
+		regulator-max-microvolt = <880000>;
+		vin-supply = <&reg_vcc5v>;
+	};
+
+	/* XC6206 LDO on the board */
+	reg_avdd2v8: regulator-avdd {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd2v8";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&reg_3v3>;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 6 12 GPIO_ACTIVE_LOW>; /* PG12 */
+	};
+};
+
+&dcxo {
+	clock-frequency = <24000000>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-0 = <&mmc0_pins>;
+	pinctrl-names = "default";
+	vmmc-supply = <&reg_3v3>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-0 = <&mmc1_pins>;
+	pinctrl-names = "default";
+	vmmc-supply = <&reg_3v3>;
+	non-removable;
+	bus-width = <4>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_3v3>;
+	vcc-pd-supply = <&reg_3v3>;
+	vcc-pe-supply = <&reg_avdd2v8>;
+	vcc-pf-supply = <&reg_3v3>;
+	vcc-pg-supply = <&reg_3v3>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pb_pins>;
+	status = "okay";
+};
+
+/* The USB-C socket has its CC pins pulled to GND, so is hardwired as a UFP. */
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc5v>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sunxi-h3-h5-emlid-neutis.dtsi b/arch/arm/boot/dts/allwinner/sunxi-h3-h5-emlid-neutis.dtsi
index fc67e30fe212..be5f5528a118 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5-emlid-neutis.dtsi
+++ b/arch/arm/boot/dts/allwinner/sunxi-h3-h5-emlid-neutis.dtsi
@@ -18,11 +18,11 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */
 		post-power-on-delay-ms = <200>;
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "ext_clock";
 	};
 };
@@ -124,7 +124,7 @@
 
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "lpo";
 		vbat-supply = <&reg_vcc3v3>;
 		vddio-supply = <&reg_vcc3v3>;
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/allwinner/sunxi-h3-h5.dtsi
index c7428df9469e..7df60515a903 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/allwinner/sunxi-h3-h5.dtsi
@@ -40,6 +40,7 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
+#include <dt-bindings/clock/sun6i-rtc.h>
 #include <dt-bindings/clock/sun8i-de2.h>
 #include <dt-bindings/clock/sun8i-h3-ccu.h>
 #include <dt-bindings/clock/sun8i-r-ccu.h>
@@ -82,7 +83,7 @@
 		#size-cells = <1>;
 		ranges;
 
-		osc24M: osc24M_clk {
+		osc24M: osc24M-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <24000000>;
@@ -90,7 +91,7 @@
 			clock-output-names = "osc24M";
 		};
 
-		osc32k: osc32k_clk {
+		osc32k: osc32k-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <32768>;
@@ -301,6 +302,8 @@
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>;
 			resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -311,6 +314,8 @@
 			clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>,
 				 <&ccu CLK_USB_OHCI0>;
 			resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -386,7 +391,7 @@
 		ccu: clock@1c20000 {
 			/* compatible is in per SoC .dtsi file */
 			reg = <0x01c20000 0x400>;
-			clocks = <&osc24M>, <&rtc 0>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
 			clock-names = "hosc", "losc";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -398,7 +403,8 @@
 			interrupt-parent = <&r_intc>;
 			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			#gpio-cells = <3>;
@@ -568,9 +574,14 @@
 		};
 
 		mbus: dram-controller@1c62000 {
-			compatible = "allwinner,sun8i-h3-mbus";
-			reg = <0x01c62000 0x1000>;
-			clocks = <&ccu CLK_MBUS>;
+			/* compatible is in per SoC .dtsi file */
+			reg = <0x01c62000 0x1000>,
+			      <0x01c63000 0x1000>;
+			reg-names = "mbus", "dram";
+			clocks = <&ccu CLK_MBUS>,
+				 <&ccu CLK_DRAM>,
+				 <&ccu CLK_BUS_DRAM>;
+			clock-names = "mbus", "dram", "bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			dma-ranges = <0x00000000 0x40000000 0xc0000000>;
@@ -699,7 +710,7 @@
 			clocks = <&ccu CLK_BUS_UART0>;
 			resets = <&ccu RST_BUS_UART0>;
 			dmas = <&dma 6>, <&dma 6>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -712,7 +723,7 @@
 			clocks = <&ccu CLK_BUS_UART1>;
 			resets = <&ccu RST_BUS_UART1>;
 			dmas = <&dma 7>, <&dma 7>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -725,7 +736,7 @@
 			clocks = <&ccu CLK_BUS_UART2>;
 			resets = <&ccu RST_BUS_UART2>;
 			dmas = <&dma 8>, <&dma 8>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -738,7 +749,7 @@
 			clocks = <&ccu CLK_BUS_UART3>;
 			resets = <&ccu RST_BUS_UART3>;
 			dmas = <&dma 9>, <&dma 9>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -813,8 +824,8 @@
 			reg-io-width = <1>;
 			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
-				 <&ccu CLK_HDMI>;
-			clock-names = "iahb", "isfr", "tmds";
+				 <&ccu CLK_HDMI>, <&rtc CLK_OSC32K>;
+			clock-names = "iahb", "isfr", "tmds", "cec";
 			resets = <&ccu RST_BUS_HDMI1>;
 			reset-names = "ctrl";
 			phys = <&hdmi_phy>;
@@ -873,7 +884,7 @@
 		r_ccu: clock@1f01400 {
 			compatible = "allwinner,sun8i-h3-r-ccu";
 			reg = <0x01f01400 0x100>;
-			clocks = <&osc24M>, <&rtc 0>, <&rtc 2>,
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>,
 				 <&ccu CLK_PLL_PERIPH0>;
 			clock-names = "hosc", "losc", "iosc", "pll-periph";
 			#clock-cells = <1>;
@@ -908,12 +919,26 @@
 			#size-cells = <0>;
 		};
 
+		r_uart: serial@1f02800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01f02800 0x400>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&r_ccu CLK_APB0_UART>;
+			resets = <&r_ccu RST_APB0_UART>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_uart_pins>;
+			status = "disabled";
+		};
+
 		r_pio: pinctrl@1f02c00 {
 			compatible = "allwinner,sun8i-h3-r-pinctrl";
 			reg = <0x01f02c00 0x400>;
 			interrupt-parent = <&r_intc>;
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&rtc 0>;
+			clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			#gpio-cells = <3>;
@@ -934,6 +959,11 @@
 				pins = "PL10";
 				function = "s_pwm";
 			};
+
+			r_uart_pins: r-uart-pins {
+				pins = "PL2", "PL3";
+				function = "s_uart";
+			};
 		};
 
 		r_pwm: pwm@1f03800 {
diff --git a/arch/arm/boot/dts/sunxi-itead-core-common.dtsi b/arch/arm/boot/dts/allwinner/sunxi-itead-core-common.dtsi
index 0d002f83a259..0d002f83a259 100644
--- a/arch/arm/boot/dts/sunxi-itead-core-common.dtsi
+++ b/arch/arm/boot/dts/allwinner/sunxi-itead-core-common.dtsi
diff --git a/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi b/arch/arm/boot/dts/allwinner/sunxi-libretech-all-h3-cc.dtsi
index c44fd726945a..89731bb34c6b 100644
--- a/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi
+++ b/arch/arm/boot/dts/allwinner/sunxi-libretech-all-h3-cc.dtsi
@@ -42,13 +42,14 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			label = "power";
 			linux,code = <KEY_POWER>;
 			gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+			wakeup-source;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/sunxi-libretech-all-h3-it.dtsi b/arch/arm/boot/dts/allwinner/sunxi-libretech-all-h3-it.dtsi
index 204fba3614f9..50d328c2a84d 100644
--- a/arch/arm/boot/dts/sunxi-libretech-all-h3-it.dtsi
+++ b/arch/arm/boot/dts/allwinner/sunxi-libretech-all-h3-it.dtsi
@@ -156,7 +156,7 @@
 &spi0 {
 	status = "okay";
 
-	spiflash@0 {
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <50000000>;
diff --git a/arch/arm/boot/dts/sunxi-reference-design-tablet.dtsi b/arch/arm/boot/dts/allwinner/sunxi-reference-design-tablet.dtsi
index 117198c52e1f..117198c52e1f 100644
--- a/arch/arm/boot/dts/sunxi-reference-design-tablet.dtsi
+++ b/arch/arm/boot/dts/allwinner/sunxi-reference-design-tablet.dtsi
diff --git a/arch/arm/boot/dts/alphascale/Makefile b/arch/arm/boot/dts/alphascale/Makefile
new file mode 100644
index 000000000000..8d1314fc79d0
--- /dev/null
+++ b/arch/arm/boot/dts/alphascale/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_MACH_ASM9260) += \
+	alphascale-asm9260-devkit.dtb
+dtb-$(CONFIG_MACH_ASM9260) += \
+	alphascale-asm9260-devkit.dtb
diff --git a/arch/arm/boot/dts/alphascale-asm9260-devkit.dts b/arch/arm/boot/dts/alphascale/alphascale-asm9260-devkit.dts
index c77e2c902fb6..c77e2c902fb6 100644
--- a/arch/arm/boot/dts/alphascale-asm9260-devkit.dts
+++ b/arch/arm/boot/dts/alphascale/alphascale-asm9260-devkit.dts
diff --git a/arch/arm/boot/dts/alphascale-asm9260.dtsi b/arch/arm/boot/dts/alphascale/alphascale-asm9260.dtsi
index 2ce6038536fd..2ce6038536fd 100644
--- a/arch/arm/boot/dts/alphascale-asm9260.dtsi
+++ b/arch/arm/boot/dts/alphascale/alphascale-asm9260.dtsi
diff --git a/arch/arm/boot/dts/am335x-baltos-ir2110.dts b/arch/arm/boot/dts/am335x-baltos-ir2110.dts
deleted file mode 100644
index daf4cb398070..000000000000
--- a/arch/arm/boot/dts/am335x-baltos-ir2110.dts
+++ /dev/null
@@ -1,83 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-/*
- * VScom OnRISC
- * http://www.vscom.de
- */
-
-/dts-v1/;
-
-#include "am335x-baltos.dtsi"
-#include "am335x-baltos-leds.dtsi"
-
-/ {
-	model = "OnRISC Baltos iR 2110";
-};
-
-&am33xx_pinmux {
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7)      /* lcd_vsync.gpio2[22] DTR */
-			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_hsync.gpio2[23] DSR */
-			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_pclk.gpio2[24] DCD */
-			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_ac_bias_en.gpio2[25] RI */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT, MUX_MODE7)     /* MMC1 CD */
-		>;
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-	dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
-	dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
-	dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
-	rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
-
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&davinci_mdio_sw {
-	phy0: ethernet-phy@0 {
-		reg = <1>;
-	};
-};
-
-&cpsw_port1 {
-	phy-mode = "rmii";
-	ti,dual-emac-pvid = <1>;
-	phy-handle = <&phy0>;
-};
-
-&cpsw_port2 {
-	phy-mode = "rgmii-id";
-	ti,dual-emac-pvid = <2>;
-	phy-handle = <&phy1>;
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-};
diff --git a/arch/arm/boot/dts/am335x-baltos-ir3220.dts b/arch/arm/boot/dts/am335x-baltos-ir3220.dts
deleted file mode 100644
index 2123bd589484..000000000000
--- a/arch/arm/boot/dts/am335x-baltos-ir3220.dts
+++ /dev/null
@@ -1,125 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-/*
- * VScom OnRISC
- * http://www.vscom.de
- */
-
-/dts-v1/;
-
-#include "am335x-baltos.dtsi"
-#include "am335x-baltos-leds.dtsi"
-
-/ {
-	model = "OnRISC Baltos iR 3220";
-};
-
-&am33xx_pinmux {
-	tca6416_pins: pinmux_tca6416_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT_PULLUP, MUX_MODE7)      /* xdma_event_intr1.gpio0[20] tca6416 stuff */
-		>;
-	};
-
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7)      /* lcd_vsync.gpio2[22] DTR */
-			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_hsync.gpio2[23] DSR */
-			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_pclk.gpio2[24] DCD */
-			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_ac_bias_en.gpio2[25] RI */
-		>;
-	};
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1)      /* spi0_sclk.uart2_rxd_mux3 */
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1)      /* spi0_d0.uart2_txd_mux3 */
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE2)      /* i2c0_sda.uart2_ctsn_mux0 */
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_OUTPUT_PULLDOWN, MUX_MODE2)      /* i2c0_scl.uart2_rtsn_mux0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT_PULLDOWN, MUX_MODE7)      /* gpmc_ad12.gpio1[12] DTR */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* gpmc_ad13.gpio1[13] DSR */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* gpmc_ad14.gpio1[14] DCD */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7)     /* gpmc_ad15.gpio1[15] RI */
-
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7)      /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT, MUX_MODE7)     /* MMC1 CD */
-		>;
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-	dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
-	dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
-	dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
-	rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
-
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-	dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-	dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-	dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-	rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-
-	status = "okay";
-};
-
-&i2c1 {
-	tca6416: gpio@20 {
-		compatible = "ti,tca6416";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <20 IRQ_TYPE_EDGE_RISING>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&tca6416_pins>;
-	};
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&cpsw_port1 {
-	phy-mode = "rmii";
-	ti,dual-emac-pvid = <1>;
-	fixed-link {
-		speed = <100>;
-		full-duplex;
-	};
-};
-
-&cpsw_port2 {
-	phy-mode = "rgmii-id";
-	ti,dual-emac-pvid = <2>;
-	phy-handle = <&phy1>;
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
-};
diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
deleted file mode 100644
index 2f3872dbf4f4..000000000000
--- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts
+++ /dev/null
@@ -1,149 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-/*
- * VScom OnRISC
- * http://www.vscom.de
- */
-
-/dts-v1/;
-
-#include "am335x-baltos.dtsi"
-#include "am335x-baltos-leds.dtsi"
-
-/ {
-	model = "OnRISC Baltos iR 5221";
-};
-
-&am33xx_pinmux {
-	tca6416_pins: pinmux_tca6416_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT_PULLUP, MUX_MODE7)      /* xdma_event_intr1.gpio0[20] tca6416 stuff */
-		>;
-	};
-
-
-	dcan1_pins: pinmux_dcan1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2)      /* uart0_ctsn.dcan1_tx_mux0 */
-			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE2)      /* uart0_rtsn.dcan1_rx_mux0 */
-		>;
-	};
-
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7)      /* lcd_vsync.gpio2[22] DTR */
-			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_hsync.gpio2[23] DSR */
-			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_pclk.gpio2[24] DCD */
-			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_ac_bias_en.gpio2[25] RI */
-		>;
-	};
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1)      /* spi0_sclk.uart2_rxd_mux3 */
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1)      /* spi0_d0.uart2_txd_mux3 */
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE2)      /* i2c0_sda.uart2_ctsn_mux0 */
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_OUTPUT_PULLDOWN, MUX_MODE2)      /* i2c0_scl.uart2_rtsn_mux0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT_PULLDOWN, MUX_MODE7)      /* gpmc_ad12.gpio1[12] DTR */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* gpmc_ad13.gpio1[13] DSR */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* gpmc_ad14.gpio1[14] DCD */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7)     /* gpmc_ad15.gpio1[15] RI */
-
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7)      /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT, MUX_MODE7)     /* MMC1 CD */
-		>;
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-	dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
-	dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
-	dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
-	rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
-
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-	dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-	dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-	dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-	rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-
-	status = "okay";
-};
-
-&i2c1 {
-	tca6416: gpio@20 {
-		compatible = "ti,tca6416";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <20 IRQ_TYPE_EDGE_RISING>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&tca6416_pins>;
-	};
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&usb1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&cpsw_port1 {
-	phy-mode = "rmii";
-	ti,dual-emac-pvid = <1>;
-	fixed-link {
-		speed = <100>;
-		full-duplex;
-	};
-};
-
-&cpsw_port2 {
-	phy-mode = "rgmii-id";
-	ti,dual-emac-pvid = <2>;
-	phy-handle = <&phy1>;
-};
-
-&dcan1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&dcan1_pins>;
-
-	status = "okay";
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
-};
diff --git a/arch/arm/boot/dts/am335x-guardian.dts b/arch/arm/boot/dts/am335x-guardian.dts
deleted file mode 100644
index 1918766c1f80..000000000000
--- a/arch/arm/boot/dts/am335x-guardian.dts
+++ /dev/null
@@ -1,490 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- * Copyright (C) 2018 Robert Bosch Power Tools GmbH
- */
-/dts-v1/;
-
-#include "am33xx.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "Bosch AM335x Guardian";
-	compatible = "bosch,am335x-guardian", "ti,am33xx";
-
-	chosen {
-		stdout-path = &uart0;
-		tick-timer = &timer2;
-	};
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&dcdc2_reg>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_keys_pins>;
-
-		button21 {
-			label = "guardian-power-button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio2 21 0>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&leds_pins>;
-
-		led1 {
-			label = "green:heartbeat";
-			gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-
-		led2 {
-			label = "green:mmc0";
-			gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc0";
-			default-state = "off";
-		};
-	};
-
-	panel {
-		compatible = "ti,tilcdc,panel";
-		pinctrl-names = "default", "sleep";
-		pinctrl-0 = <&lcd_pins_default &lcd_disen_pins>;
-		pinctrl-1 = <&lcd_pins_sleep>;
-
-		display-timings {
-			320x240 {
-				hactive         = <320>;
-				vactive         = <240>;
-				hback-porch     = <68>;
-				hfront-porch    = <20>;
-				hsync-len       = <1>;
-				vback-porch     = <18>;
-				vfront-porch    = <4>;
-				vsync-len       = <1>;
-				clock-frequency = <9000000>;
-				hsync-active    = <0>;
-				vsync-active    = <0>;
-			};
-		};
-		panel-info {
-			ac-bias           = <255>;
-			ac-bias-intrpt    = <0>;
-			dma-burst-sz      = <16>;
-			bpp               = <24>;
-			bus-width         = <16>;
-			fdd               = <0x80>;
-			sync-edge         = <0>;
-			sync-ctrl         = <1>;
-			raster-order      = <0>;
-			fifo-th           = <0>;
-		};
-
-	};
-
-	pwm7: dmtimer-pwm {
-		compatible = "ti,omap-dmtimer-pwm";
-		ti,timers = <&timer7>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&dmtimer7_pins>;
-		ti,clock-source = <0x01>;
-	};
-
-	vmmcsd_fixed: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-&elm {
-	status = "okay";
-};
-
-&gpmc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&nandflash_pins>;
-	ranges = <0 0 0x08000000 0x1000000>;  /* CS0: 16MB for NAND */
-	status = "okay";
-
-	nand@0,0 {
-		compatible = "ti,omap2-nand";
-		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
-		interrupt-parent = <&gpmc>;
-		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
-			     <1 IRQ_TYPE_NONE>; /* termcount */
-		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
-		ti,nand-ecc-opt = "bch16";
-		ti,elm-id = <&elm>;
-		nand-bus-width = <8>;
-		gpmc,device-width = <1>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-on-ns = <0>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-
-		/*
-		 * MTD partition table
-		 *
-		 * All SPL-* partitions are sized to minimal length which can
-		 * be independently programmable. For NAND flash this is equal
-		 * to size of erase-block.
-		 */
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "SPL";
-			reg = <0x0 0x40000>;
-		};
-
-		partition@1 {
-			label = "SPL.backup1";
-			reg = <0x40000  0x40000>;
-		};
-
-		partition@2 {
-			label = "SPL.backup2";
-			reg = <0x80000  0x40000>;
-		};
-
-		partition@3 {
-			label = "SPL.backup3";
-			reg = <0xc0000  0x40000>;
-		};
-
-		partition@4 {
-			label = "u-boot";
-			reg = <0x100000 0x100000>;
-		};
-
-		partition@5 {
-			label = "u-boot.backup1";
-			reg = <0x200000 0x100000>;
-		};
-
-		partition@6 {
-			label = "u-boot-env";
-			reg = <0x300000 0x40000>;
-		};
-
-		partition@7 {
-			label = "u-boot-env.backup1";
-			reg = <0x340000 0x40000>;
-		};
-
-		partition@8 {
-			label = "UBI";
-			reg = <0x380000 0x1fc80000>;
-		};
-	};
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-	clock-frequency = <400000>;
-	status = "okay";
-
-	tps: tps@24 {
-		reg = <0x24>;
-	};
-};
-
-&lcdc {
-	blue-and-red-wiring = "crossed";
-	status = "okay";
-};
-
-&mmc1 {
-	bus-width = <0x4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&vmmcsd_fixed>;
-	status = "okay";
-};
-
-&rtc {
-	clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
-	clock-names = "ext-clk", "int-clk";
-	system-power-controller;
-};
-
-&spi0 {
-	ti,pindir-d0-out-d1-in;
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins>;
-	status = "okay";
-};
-
-#include "tps65217.dtsi"
-
-&tps {
-	ti,pmic-shutdown-controller;
-	interrupt-parent = <&intc>;
-	interrupts = <7>; /* NMI */
-
-	backlight {
-		isel = <1>;  /* 1 - ISET1, 2 ISET2 */
-		fdim = <100>; /* TPS65217_BL_FDIM_100HZ */
-		default-brightness = <100>;
-	};
-
-	regulators {
-		dcdc1_reg: regulator@0 {
-			regulator-name = "vdds_dpr";
-			regulator-always-on;
-		};
-
-		dcdc2_reg: regulator@1 {
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1351500>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc3_reg: regulator@2 {
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1150000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo1_reg: regulator@3 {
-			regulator-name = "vio,vrtc,vdds";
-			regulator-always-on;
-		};
-
-		ldo2_reg: regulator@4 {
-			regulator-name = "vdd_3v3aux";
-			regulator-always-on;
-		};
-
-		ldo3_reg: regulator@5 {
-			regulator-name = "vdd_1v8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		ldo4_reg: regulator@6 {
-			regulator-name = "vdd_3v3a";
-			regulator-always-on;
-		};
-	};
-};
-
-&tscadc {
-	status = "okay";
-
-	adc {
-		ti,adc-channels = <0 1 2 3 4 5 6>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-	status = "okay";
-};
-
-&usb0 {
-	dr_mode = "peripheral";
-};
-
-&usb1 {
-	dr_mode = "host";
-};
-
-&am33xx_pinmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&clkout2_pin &gpio_pins>;
-
-	clkout2_pin: pinmux_clkout2_pin {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
-		>;
-	};
-
-	dmtimer7_pins: pinmux_dmtimer7_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE5)
-		>;
-	};
-
-	gpio_keys_pins: pinmux_gpio_keys_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x940, PIN_INPUT | MUX_MODE7)
-		>;
-	};
-
-	gpio_pins: pinmux_gpio_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x928, PIN_OUTPUT | MUX_MODE7)
-			AM33XX_IOPAD(0x990, PIN_OUTPUT | MUX_MODE7)
-		>;
-	};
-
-	i2c0_pins: pinmux_i2c0_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)
-			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)
-		>;
-	};
-
-	lcd_disen_pins: pinmux_lcd_disen_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x9a4, PIN_OUTPUT_PULLUP | SLEWCTRL_SLOW | MUX_MODE7)
-		>;
-	};
-
-	lcd_pins_default: pinmux_lcd_pins_default {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x820, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
-			AM33XX_IOPAD(0x824, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
-			AM33XX_IOPAD(0x828, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
-			AM33XX_IOPAD(0x82c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
-			AM33XX_IOPAD(0x830, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
-			AM33XX_IOPAD(0x834, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
-			AM33XX_IOPAD(0x838, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
-			AM33XX_IOPAD(0x83c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
-			AM33XX_IOPAD(0x8a0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			AM33XX_IOPAD(0x8c0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			AM33XX_IOPAD(0x8c8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			AM33XX_IOPAD(0x8d0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			AM33XX_IOPAD(0x8d8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			AM33XX_IOPAD(0x8dc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			AM33XX_IOPAD(0x8e0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			AM33XX_IOPAD(0x8e4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			AM33XX_IOPAD(0x8e8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			AM33XX_IOPAD(0x8ec, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-		>;
-	};
-
-	lcd_pins_sleep: pinmux_lcd_pins_sleep {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x8a0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
-			AM33XX_IOPAD(0x8a4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
-			AM33XX_IOPAD(0x8a8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
-			AM33XX_IOPAD(0x8ac, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
-			AM33XX_IOPAD(0x8b0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
-			AM33XX_IOPAD(0x8b4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
-			AM33XX_IOPAD(0x8b8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
-			AM33XX_IOPAD(0x8bc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
-			AM33XX_IOPAD(0x8c0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
-			AM33XX_IOPAD(0x8c4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
-			AM33XX_IOPAD(0x8c8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
-			AM33XX_IOPAD(0x8cc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
-			AM33XX_IOPAD(0x8d0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
-			AM33XX_IOPAD(0x8d4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
-			AM33XX_IOPAD(0x8d8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
-			AM33XX_IOPAD(0x8dc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
-			AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
-			AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
-			AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
-			AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
-		>;
-	};
-
-	leds_pins: pinmux_leds_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x868, PIN_OUTPUT | MUX_MODE7)
-			AM33XX_IOPAD(0x86c, PIN_OUTPUT | MUX_MODE7)
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)
-			AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)
-			AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)
-			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)
-			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)
-			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)
-			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7)
-		>;
-	};
-
-	spi0_pins: pinmux_spi0_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x950, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
-			AM33XX_IOPAD(0x954, PIN_OUTPUT_PULLUP | MUX_MODE0)
-			AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0)
-			AM33XX_IOPAD(0x95c, PIN_OUTPUT_PULLUP | MUX_MODE0)
-		>;
-	};
-
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)
-			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
-		>;
-	};
-
-	nandflash_pins: pinmux_nandflash_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x800, PIN_INPUT | MUX_MODE0)
-			AM33XX_IOPAD(0x804, PIN_INPUT | MUX_MODE0)
-			AM33XX_IOPAD(0x808, PIN_INPUT | MUX_MODE0)
-			AM33XX_IOPAD(0x80c, PIN_INPUT | MUX_MODE0)
-			AM33XX_IOPAD(0x810, PIN_INPUT | MUX_MODE0)
-			AM33XX_IOPAD(0x814, PIN_INPUT | MUX_MODE0)
-			AM33XX_IOPAD(0x818, PIN_INPUT | MUX_MODE0)
-			AM33XX_IOPAD(0x81c, PIN_INPUT | MUX_MODE0)
-			AM33XX_IOPAD(0x870, PIN_INPUT | MUX_MODE0)
-			AM33XX_IOPAD(0x874, PIN_OUTPUT | MUX_MODE0)
-			AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)
-			AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)
-			AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)
-			AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)
-			AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts b/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts
deleted file mode 100644
index 57e756b0f192..000000000000
--- a/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts
+++ /dev/null
@@ -1,87 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-/*
- * VScom OnRISC
- * http://www.vscom.de
- */
-
-/dts-v1/;
-
-#include "am335x-baltos.dtsi"
-#include "am335x-baltos-leds.dtsi"
-
-/ {
-	model = "NetCAN";
-
-	leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&user_leds_s0>;
-
-		compatible = "gpio-leds";
-
-		led@1 {
-			label = "can_data";
-			linux,default-trigger = "netdev";
-			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-		led@2 {
-			label = "can_error";
-			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-	};
-};
-
-&am33xx_pinmux {
-	user_leds_s0: user_leds_s0 {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* CAN Data LED */
-			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* CAN Error LED */
-		>;
-	};
-
-	dcan1_pins: pinmux_dcan1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2)	/* CAN TX */
-			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE2)	/* CAN RX */
-		>;
-	};
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&davinci_mdio_sw {
-	phy0: ethernet-phy@0 {
-		reg = <1>;
-	};
-};
-
-&cpsw_port1 {
-	phy-mode = "rmii";
-	ti,dual-emac-pvid = <1>;
-	phy-handle = <&phy0>;
-};
-
-&cpsw_port2 {
-	phy-mode = "rgmii-id";
-	ti,dual-emac-pvid = <2>;
-	phy-handle = <&phy1>;
-};
-
-&dcan1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&dcan1_pins>;
-
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts b/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts
deleted file mode 100644
index c6cc1c6218a9..000000000000
--- a/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts
+++ /dev/null
@@ -1,95 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-/*
- * VScom OnRISC
- * http://www.vscom.de
- */
-
-/dts-v1/;
-
-#include "am335x-baltos.dtsi"
-#include "am335x-baltos-leds.dtsi"
-
-/ {
-	model = "NetCom Plus";
-};
-
-&am33xx_pinmux {
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)			/* RX */
-			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)			/* TX */
-			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)		/* CTS */
-			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)		/* RTS */
-			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7)		/* DTR */
-			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)		/* DSR */
-			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)		/* DCD */
-			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* RI */
-		>;
-	};
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1)		/* RX */
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1)      		/* TX */
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* CTS */
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* RTS */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* DTR */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* DSR */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* DCD */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* RI */
-		>;
-	};
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-	dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
-	dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
-	dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
-	rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
-
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-	dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-	dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-	dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-	rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-
-	status = "okay";
-};
-
-&davinci_mdio_sw {
-	phy0: ethernet-phy@0 {
-		reg = <1>;
-	};
-};
-
-&cpsw_port1 {
-	phy-mode = "rmii";
-	ti,dual-emac-pvid = <1>;
-	phy-handle = <&phy0>;
-};
-
-&cpsw_port2 {
-	phy-mode = "rgmii-id";
-	ti,dual-emac-pvid = <2>;
-	phy-handle = <&phy1>;
-};
diff --git a/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts b/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts
deleted file mode 100644
index 96dffd3ffd85..000000000000
--- a/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts
+++ /dev/null
@@ -1,115 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-/*
- * VScom OnRISC
- * http://www.vscom.de
- */
-
-/dts-v1/;
-
-#include "am335x-baltos.dtsi"
-
-/ {
-	model = "NetCom Plus";
-};
-
-&am33xx_pinmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&dip_switches>;
-
-	dip_switches: pinmux_dip_switches {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-
-	tca6416_pins: pinmux_tca6416_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT_PULLUP, MUX_MODE7)
-		>;
-	};
-
-	i2c2_pins: pinmux_i2c2_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE3)
-			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE3)
-		>;
-	};
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&usb1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&i2c1 {
-	tca6416a: gpio@20 {
-		compatible = "ti,tca6416";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <20 IRQ_TYPE_EDGE_RISING>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&tca6416_pins>;
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	tca6416b: gpio@20 {
-		compatible = "ti,tca6416";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	tca6416c: gpio@21 {
-		compatible = "ti,tca6416";
-		reg = <0x21>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-};
-
-&davinci_mdio_sw {
-	phy0: ethernet-phy@0 {
-		reg = <1>;
-	};
-};
-
-&cpsw_port1 {
-	phy-mode = "rmii";
-	ti,dual-emac-pvid = <1>;
-	phy-handle = <&phy0>;
-};
-
-&cpsw_port2 {
-	phy-mode = "rgmii-id";
-	ti,dual-emac-pvid = <2>;
-	phy-handle = <&phy1>;
-};
diff --git a/arch/arm/boot/dts/am33xx-clocks.dtsi b/arch/arm/boot/dts/am33xx-clocks.dtsi
deleted file mode 100644
index b7b7106f2dee..000000000000
--- a/arch/arm/boot/dts/am33xx-clocks.dtsi
+++ /dev/null
@@ -1,676 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for AM33xx clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- */
-&scm_clocks {
-	sys_clkin_ck: sys_clkin_ck@40 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
-		ti,bit-shift = <22>;
-		reg = <0x0040>;
-	};
-
-	adc_tsc_fck: adc_tsc_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dcan0_fck: dcan0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dcan1_fck: dcan1_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	mcasp0_fck: mcasp0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	mcasp1_fck: mcasp1_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	smartreflex0_fck: smartreflex0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	smartreflex1_fck: smartreflex1_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	sha0_fck: sha0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	aes0_fck: aes0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	rng_fck: rng_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	ehrpwm0_tbclk: ehrpwm0_tbclk@44e10664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4ls_gclk>;
-		ti,bit-shift = <0>;
-		reg = <0x0664>;
-	};
-
-	ehrpwm1_tbclk: ehrpwm1_tbclk@44e10664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4ls_gclk>;
-		ti,bit-shift = <1>;
-		reg = <0x0664>;
-	};
-
-	ehrpwm2_tbclk: ehrpwm2_tbclk@44e10664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4ls_gclk>;
-		ti,bit-shift = <2>;
-		reg = <0x0664>;
-	};
-};
-&prcm_clocks {
-	clk_32768_ck: clk_32768_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	clk_rc32k_ck: clk_rc32k_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32000>;
-	};
-
-	virt_19200000_ck: virt_19200000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <19200000>;
-	};
-
-	virt_24000000_ck: virt_24000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-	};
-
-	virt_25000000_ck: virt_25000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <25000000>;
-	};
-
-	virt_26000000_ck: virt_26000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
-	};
-
-	tclkin_ck: tclkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <12000000>;
-	};
-
-	dpll_core_ck: dpll_core_ck@490 {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-core-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x0490>, <0x045c>, <0x0468>, <0x0460>, <0x0464>;
-	};
-
-	dpll_core_x2_ck: dpll_core_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-x2-clock";
-		clocks = <&dpll_core_ck>;
-	};
-
-	dpll_core_m4_ck: dpll_core_m4_ck@480 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		reg = <0x0480>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_core_m5_ck: dpll_core_m5_ck@484 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		reg = <0x0484>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_core_m6_ck: dpll_core_m6_ck@4d8 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		reg = <0x04d8>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_mpu_ck: dpll_mpu_ck@488 {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x0488>, <0x0420>, <0x042c>, <0x0424>, <0x0428>;
-	};
-
-	dpll_mpu_m2_ck: dpll_mpu_m2_ck@4a8 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_mpu_ck>;
-		ti,max-div = <31>;
-		reg = <0x04a8>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_ddr_ck: dpll_ddr_ck@494 {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-no-gate-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x0494>, <0x0434>, <0x0440>, <0x0438>, <0x043c>;
-	};
-
-	dpll_ddr_m2_ck: dpll_ddr_m2_ck@4a0 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_ddr_ck>;
-		ti,max-div = <31>;
-		reg = <0x04a0>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_ddr_m2_div2_ck: dpll_ddr_m2_div2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_ddr_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	dpll_disp_ck: dpll_disp_ck@498 {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-no-gate-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x0498>, <0x0448>, <0x0454>, <0x044c>, <0x0450>;
-	};
-
-	dpll_disp_m2_ck: dpll_disp_m2_ck@4a4 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_disp_ck>;
-		ti,max-div = <31>;
-		reg = <0x04a4>;
-		ti,index-starts-at-one;
-		ti,set-rate-parent;
-	};
-
-	dpll_per_ck: dpll_per_ck@48c {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-no-gate-j-type-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x048c>, <0x0470>, <0x049c>, <0x0474>, <0x0478>;
-	};
-
-	dpll_per_m2_ck: dpll_per_m2_ck@4ac {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_ck>;
-		ti,max-div = <31>;
-		reg = <0x04ac>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_per_m2_div4_wkupdm_ck: dpll_per_m2_div4_wkupdm_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	dpll_per_m2_div4_ck: dpll_per_m2_div4_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	clk_24mhz: clk_24mhz {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <8>;
-	};
-
-	clkdiv32k_ck: clkdiv32k_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&clk_24mhz>;
-		clock-mult = <1>;
-		clock-div = <732>;
-	};
-
-	l3_gclk: l3_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	pruss_ocp_gclk: pruss_ocp_gclk@530 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&l3_gclk>, <&dpll_disp_m2_ck>;
-		reg = <0x0530>;
-	};
-
-	mmu_fck: mmu_fck@914 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_core_m4_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0914>;
-	};
-
-	timer1_fck: timer1_fck@528 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>;
-		reg = <0x0528>;
-	};
-
-	timer2_fck: timer2_fck@508 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
-		reg = <0x0508>;
-	};
-
-	timer3_fck: timer3_fck@50c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
-		reg = <0x050c>;
-	};
-
-	timer4_fck: timer4_fck@510 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
-		reg = <0x0510>;
-	};
-
-	timer5_fck: timer5_fck@518 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
-		reg = <0x0518>;
-	};
-
-	timer6_fck: timer6_fck@51c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
-		reg = <0x051c>;
-	};
-
-	timer7_fck: timer7_fck@504 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
-		reg = <0x0504>;
-	};
-
-	usbotg_fck: usbotg_fck@47c {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x047c>;
-	};
-
-	dpll_core_m4_div2_ck: dpll_core_m4_div2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	ieee5000_fck: ieee5000_fck@e4 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_core_m4_div2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x00e4>;
-	};
-
-	wdt1_fck: wdt1_fck@538 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clk_rc32k_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
-		reg = <0x0538>;
-	};
-
-	l4_rtc_gclk: l4_rtc_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	l4hs_gclk: l4hs_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l3s_gclk: l3s_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_div2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l4fw_gclk: l4fw_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_div2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l4ls_gclk: l4ls_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_div2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	sysclk_div_ck: sysclk_div_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	cpsw_125mhz_gclk: cpsw_125mhz_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m5_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	cpsw_cpts_rft_clk: cpsw_cpts_rft_clk@520 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_core_m5_ck>, <&dpll_core_m4_ck>;
-		reg = <0x0520>;
-	};
-
-	gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck@53c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
-		reg = <0x053c>;
-	};
-
-	lcd_gclk: lcd_gclk@534 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>;
-		reg = <0x0534>;
-		ti,set-rate-parent;
-	};
-
-	mmc_clk: mmc_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	gfx_fclk_clksel_ck: gfx_fclk_clksel_ck@52c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_core_m4_ck>, <&dpll_per_m2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x052c>;
-	};
-
-	gfx_fck_div_ck: gfx_fck_div_ck@52c {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&gfx_fclk_clksel_ck>;
-		reg = <0x052c>;
-		ti,max-div = <2>;
-	};
-
-	sysclkout_pre_ck: sysclkout_pre_ck@700 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clk_32768_ck>, <&l3_gclk>, <&dpll_ddr_m2_ck>, <&dpll_per_m2_ck>, <&lcd_gclk>;
-		reg = <0x0700>;
-	};
-
-	clkout2_div_ck: clkout2_div_ck@700 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sysclkout_pre_ck>;
-		ti,bit-shift = <3>;
-		ti,max-div = <8>;
-		reg = <0x0700>;
-	};
-
-	clkout2_ck: clkout2_ck@700 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkout2_div_ck>;
-		ti,bit-shift = <7>;
-		reg = <0x0700>;
-	};
-};
-
-&prcm {
-	per_cm: per-cm@0 {
-		compatible = "ti,omap4-cm";
-		reg = <0x0 0x400>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x0 0x400>;
-
-		l4ls_clkctrl: l4ls-clkctrl@38 {
-			compatible = "ti,clkctrl";
-			reg = <0x38 0x2c>, <0x6c 0x28>, <0xac 0xc>, <0xc0 0x1c>, <0xec 0xc>, <0x10c 0x8>, <0x130 0x4>;
-			#clock-cells = <2>;
-		};
-
-		l3s_clkctrl: l3s-clkctrl@1c {
-			compatible = "ti,clkctrl";
-			reg = <0x1c 0x4>, <0x30 0x8>, <0x68 0x4>, <0xf8 0x4>;
-			#clock-cells = <2>;
-		};
-
-		l3_clkctrl: l3-clkctrl@24 {
-			compatible = "ti,clkctrl";
-			reg = <0x24 0xc>, <0x94 0x10>, <0xbc 0x4>, <0xdc 0x8>, <0xfc 0x8>;
-			#clock-cells = <2>;
-		};
-
-		l4hs_clkctrl: l4hs-clkctrl@120 {
-			compatible = "ti,clkctrl";
-			reg = <0x120 0x4>;
-			#clock-cells = <2>;
-		};
-
-		pruss_ocp_clkctrl: pruss-ocp-clkctrl@e8 {
-			compatible = "ti,clkctrl";
-			reg = <0xe8 0x4>;
-			#clock-cells = <2>;
-		};
-
-		cpsw_125mhz_clkctrl: cpsw-125mhz-clkctrl@0 {
-			compatible = "ti,clkctrl";
-			reg = <0x0 0x18>;
-			#clock-cells = <2>;
-		};
-
-		lcdc_clkctrl: lcdc-clkctrl@18 {
-			compatible = "ti,clkctrl";
-			reg = <0x18 0x4>;
-			#clock-cells = <2>;
-		};
-
-		clk_24mhz_clkctrl: clk-24mhz-clkctrl@14c {
-			compatible = "ti,clkctrl";
-			reg = <0x14c 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-
-	wkup_cm: wkup-cm@400 {
-		compatible = "ti,omap4-cm";
-		reg = <0x400 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x400 0x100>;
-
-		l4_wkup_clkctrl: l4-wkup-clkctrl@0 {
-			compatible = "ti,clkctrl";
-			reg = <0x0 0x10>, <0xb4 0x24>;
-			#clock-cells = <2>;
-		};
-
-		l3_aon_clkctrl: l3-aon-clkctrl@14 {
-			compatible = "ti,clkctrl";
-			reg = <0x14 0x4>;
-			#clock-cells = <2>;
-		};
-
-		l4_wkup_aon_clkctrl: l4-wkup-aon-clkctrl@b0 {
-			compatible = "ti,clkctrl";
-			reg = <0xb0 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-
-	mpu_cm: mpu-cm@600 {
-		compatible = "ti,omap4-cm";
-		reg = <0x600 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x600 0x100>;
-
-		mpu_clkctrl: mpu-clkctrl@0 {
-			compatible = "ti,clkctrl";
-			reg = <0x0 0x8>;
-			#clock-cells = <2>;
-		};
-	};
-
-	l4_rtc_cm: l4-rtc-cm@800 {
-		compatible = "ti,omap4-cm";
-		reg = <0x800 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x800 0x100>;
-
-		l4_rtc_clkctrl: l4-rtc-clkctrl@0 {
-			compatible = "ti,clkctrl";
-			reg = <0x0 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-
-	gfx_l3_cm: gfx-l3-cm@900 {
-		compatible = "ti,omap4-cm";
-		reg = <0x900 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x900 0x100>;
-
-		gfx_l3_clkctrl: gfx-l3-clkctrl@0 {
-			compatible = "ti,clkctrl";
-			reg = <0x0 0x8>;
-			#clock-cells = <2>;
-		};
-	};
-
-	l4_cefuse_cm: l4-cefuse-cm@a00 {
-		compatible = "ti,omap4-cm";
-		reg = <0xa00 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xa00 0x100>;
-
-		l4_cefuse_clkctrl: l4-cefuse-clkctrl@0 {
-			compatible = "ti,clkctrl";
-			reg = <0x0 0x24>;
-			#clock-cells = <2>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/am35xx-clocks.dtsi b/arch/arm/boot/dts/am35xx-clocks.dtsi
deleted file mode 100644
index 220d0a52797e..000000000000
--- a/arch/arm/boot/dts/am35xx-clocks.dtsi
+++ /dev/null
@@ -1,125 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for OMAP3 clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- */
-&scm_clocks {
-	emac_ick: emac_ick@32c {
-		#clock-cells = <0>;
-		compatible = "ti,am35xx-gate-clock";
-		clocks = <&ipss_ick>;
-		reg = <0x032c>;
-		ti,bit-shift = <1>;
-	};
-
-	emac_fck: emac_fck@32c {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&rmii_ck>;
-		reg = <0x032c>;
-		ti,bit-shift = <9>;
-	};
-
-	vpfe_ick: vpfe_ick@32c {
-		#clock-cells = <0>;
-		compatible = "ti,am35xx-gate-clock";
-		clocks = <&ipss_ick>;
-		reg = <0x032c>;
-		ti,bit-shift = <2>;
-	};
-
-	vpfe_fck: vpfe_fck@32c {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&pclk_ck>;
-		reg = <0x032c>;
-		ti,bit-shift = <10>;
-	};
-
-	hsotgusb_ick_am35xx: hsotgusb_ick_am35xx@32c {
-		#clock-cells = <0>;
-		compatible = "ti,am35xx-gate-clock";
-		clocks = <&ipss_ick>;
-		reg = <0x032c>;
-		ti,bit-shift = <0>;
-	};
-
-	hsotgusb_fck_am35xx: hsotgusb_fck_am35xx@32c {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_ck>;
-		reg = <0x032c>;
-		ti,bit-shift = <8>;
-	};
-
-	hecc_ck: hecc_ck@32c {
-		#clock-cells = <0>;
-		compatible = "ti,am35xx-gate-clock";
-		clocks = <&sys_ck>;
-		reg = <0x032c>;
-		ti,bit-shift = <3>;
-	};
-};
-&cm_clocks {
-	ipss_ick: ipss_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,am35xx-interface-clock";
-		clocks = <&core_l3_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <4>;
-	};
-
-	rmii_ck: rmii_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <50000000>;
-	};
-
-	pclk_ck: pclk_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <27000000>;
-	};
-
-	uart4_ick_am35xx: uart4_ick_am35xx@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <23>;
-	};
-
-	uart4_fck_am35xx: uart4_fck_am35xx@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_48m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <23>;
-	};
-};
-
-&cm_clockdomains {
-	core_l3_clkdm: core_l3_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&sdrc_ick>, <&ipss_ick>, <&emac_ick>, <&vpfe_ick>,
-			 <&hsotgusb_ick_am35xx>, <&hsotgusb_fck_am35xx>,
-			 <&hecc_ck>;
-	};
-
-	core_l4_clkdm: core_l4_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&cpefuse_fck>, <&ts_fck>, <&usbtll_fck>,
-			 <&usbtll_ick>, <&mmchs3_ick>, <&mmchs3_fck>,
-			 <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
-			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
-			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
-			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
-			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
-			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
-			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
-			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
-			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
-			 <&uart4_ick_am35xx>, <&uart4_fck_am35xx>;
-	};
-};
diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi
deleted file mode 100644
index 314fc5975acb..000000000000
--- a/arch/arm/boot/dts/am43xx-clocks.dtsi
+++ /dev/null
@@ -1,883 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for AM43xx clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- */
-&scm_clocks {
-	sys_clkin_ck: sys_clkin_ck@40 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sysboot_freq_sel_ck>, <&crystal_freq_sel_ck>;
-		ti,bit-shift = <31>;
-		reg = <0x0040>;
-	};
-
-	crystal_freq_sel_ck: crystal_freq_sel_ck@40 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
-		ti,bit-shift = <29>;
-		reg = <0x0040>;
-	};
-
-	sysboot_freq_sel_ck: sysboot_freq_sel_ck@44e10040 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
-		ti,bit-shift = <22>;
-		reg = <0x0040>;
-	};
-
-	adc_tsc_fck: adc_tsc_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dcan0_fck: dcan0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dcan1_fck: dcan1_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	mcasp0_fck: mcasp0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	mcasp1_fck: mcasp1_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	smartreflex0_fck: smartreflex0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	smartreflex1_fck: smartreflex1_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	sha0_fck: sha0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	aes0_fck: aes0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	rng_fck: rng_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	ehrpwm0_tbclk: ehrpwm0_tbclk@664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4ls_gclk>;
-		ti,bit-shift = <0>;
-		reg = <0x0664>;
-	};
-
-	ehrpwm1_tbclk: ehrpwm1_tbclk@664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4ls_gclk>;
-		ti,bit-shift = <1>;
-		reg = <0x0664>;
-	};
-
-	ehrpwm2_tbclk: ehrpwm2_tbclk@664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4ls_gclk>;
-		ti,bit-shift = <2>;
-		reg = <0x0664>;
-	};
-
-	ehrpwm3_tbclk: ehrpwm3_tbclk@664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4ls_gclk>;
-		ti,bit-shift = <4>;
-		reg = <0x0664>;
-	};
-
-	ehrpwm4_tbclk: ehrpwm4_tbclk@664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4ls_gclk>;
-		ti,bit-shift = <5>;
-		reg = <0x0664>;
-	};
-
-	ehrpwm5_tbclk: ehrpwm5_tbclk@664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4ls_gclk>;
-		ti,bit-shift = <6>;
-		reg = <0x0664>;
-	};
-};
-&prcm_clocks {
-	clk_32768_ck: clk_32768_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	clk_rc32k_ck: clk_rc32k_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	virt_19200000_ck: virt_19200000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <19200000>;
-	};
-
-	virt_24000000_ck: virt_24000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-	};
-
-	virt_25000000_ck: virt_25000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <25000000>;
-	};
-
-	virt_26000000_ck: virt_26000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
-	};
-
-	tclkin_ck: tclkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
-	};
-
-	dpll_core_ck: dpll_core_ck@2d20 {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-core-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2d20>, <0x2d24>, <0x2d2c>, <0x2d48>, <0x2d4c>;
-	};
-
-	dpll_core_x2_ck: dpll_core_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-x2-clock";
-		clocks = <&dpll_core_ck>;
-	};
-
-	dpll_core_m4_ck: dpll_core_m4_ck@2d38 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2d38>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_core_m5_ck: dpll_core_m5_ck@2d3c {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2d3c>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_core_m6_ck: dpll_core_m6_ck@2d40 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2d40>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_mpu_ck: dpll_mpu_ck@2d60 {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2d60>, <0x2d64>, <0x2d6c>, <0x2d88>, <0x2d8c>;
-	};
-
-	dpll_mpu_m2_ck: dpll_mpu_m2_ck@2d70 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_mpu_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2d70>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	mpu_periphclk: mpu_periphclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_mpu_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	dpll_ddr_ck: dpll_ddr_ck@2da0 {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2da0>, <0x2da4>, <0x2dac>, <0x2dc8>, <0x2dcc>;
-	};
-
-	dpll_ddr_m2_ck: dpll_ddr_m2_ck@2db0 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_ddr_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2db0>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_disp_ck: dpll_disp_ck@2e20 {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2e20>, <0x2e24>, <0x2e2c>, <0x2e48>, <0x2e4c>;
-	};
-
-	dpll_disp_m2_ck: dpll_disp_m2_ck@2e30 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_disp_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2e30>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-		ti,set-rate-parent;
-	};
-
-	dpll_per_ck: dpll_per_ck@2de0 {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-j-type-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2de0>, <0x2de4>, <0x2dec>, <0x2e08>, <0x2e0c>;
-	};
-
-	dpll_per_m2_ck: dpll_per_m2_ck@2df0 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_ck>;
-		ti,max-div = <127>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2df0>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_m2_div4_wkupdm_ck: dpll_per_m2_div4_wkupdm_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	dpll_per_m2_div4_ck: dpll_per_m2_div4_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	clk_24mhz: clk_24mhz {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <8>;
-	};
-
-	clkdiv32k_ck: clkdiv32k_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&clk_24mhz>;
-		clock-mult = <1>;
-		clock-div = <732>;
-	};
-
-	clkdiv32k_ick: clkdiv32k_ick@2a38 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x2a38>;
-	};
-
-	sysclk_div: sysclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	pruss_ocp_gclk: pruss_ocp_gclk@4248 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sysclk_div>, <&dpll_disp_m2_ck>;
-		reg = <0x4248>;
-	};
-
-	clk_32k_tpm_ck: clk_32k_tpm_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	timer1_fck: timer1_fck@4200 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin_ck>, <&clkdiv32k_ick>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>, <&clk_32k_tpm_ck>;
-		reg = <0x4200>;
-	};
-
-	timer2_fck: timer2_fck@4204 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x4204>;
-	};
-
-	timer3_fck: timer3_fck@4208 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x4208>;
-	};
-
-	timer4_fck: timer4_fck@420c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x420c>;
-	};
-
-	timer5_fck: timer5_fck@4210 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x4210>;
-	};
-
-	timer6_fck: timer6_fck@4214 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x4214>;
-	};
-
-	timer7_fck: timer7_fck@4218 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x4218>;
-	};
-
-	wdt1_fck: wdt1_fck@422c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clk_rc32k_ck>, <&clkdiv32k_ick>;
-		reg = <0x422c>;
-	};
-
-	l3_gclk: l3_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_core_m4_div2_ck: dpll_core_m4_div2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sysclk_div>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	l4hs_gclk: l4hs_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l3s_gclk: l3s_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_div2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l4ls_gclk: l4ls_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_div2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	cpsw_125mhz_gclk: cpsw_125mhz_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m5_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	cpsw_cpts_rft_clk: cpsw_cpts_rft_clk@4238 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sysclk_div>, <&dpll_core_m5_ck>, <&dpll_disp_m2_ck>;
-		reg = <0x4238>;
-	};
-
-	dpll_clksel_mac_clk: dpll_clksel_mac_clk@4234 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_m5_ck>;
-		reg = <0x4234>;
-		ti,bit-shift = <2>;
-		ti,dividers = <2>, <5>;
-	};
-
-	clk_32k_mosc_ck: clk_32k_mosc_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck@4240 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clkdiv32k_ick>, <&clk_32k_mosc_ck>, <&clk_32k_tpm_ck>;
-		reg = <0x4240>;
-	};
-
-	mmc_clk: mmc_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	gfx_fclk_clksel_ck: gfx_fclk_clksel_ck@423c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sysclk_div>, <&dpll_per_m2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x423c>;
-	};
-
-	gfx_fck_div_ck: gfx_fck_div_ck@423c {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&gfx_fclk_clksel_ck>;
-		reg = <0x423c>;
-		ti,max-div = <2>;
-	};
-
-	disp_clk: disp_clk@4244 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>;
-		reg = <0x4244>;
-		ti,set-rate-parent;
-	};
-
-	dpll_extdev_ck: dpll_extdev_ck@2e60 {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2e60>, <0x2e64>, <0x2e6c>, <0x2e88>, <0x2e8c>;
-	};
-
-	dpll_extdev_m2_ck: dpll_extdev_m2_ck@2e70 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_extdev_ck>;
-		ti,max-div = <127>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2e70>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	mux_synctimer32k_ck: mux_synctimer32k_ck@4230 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>, <&clkdiv32k_ick>;
-		reg = <0x4230>;
-	};
-
-	timer8_fck: timer8_fck@421c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
-		reg = <0x421c>;
-	};
-
-	timer9_fck: timer9_fck@4220 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
-		reg = <0x4220>;
-	};
-
-	timer10_fck: timer10_fck@4224 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
-		reg = <0x4224>;
-	};
-
-	timer11_fck: timer11_fck@4228 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
-		reg = <0x4228>;
-	};
-
-	cpsw_50m_clkdiv: cpsw_50m_clkdiv {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m5_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	cpsw_5m_clkdiv: cpsw_5m_clkdiv {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&cpsw_50m_clkdiv>;
-		clock-mult = <1>;
-		clock-div = <10>;
-	};
-
-	dpll_ddr_x2_ck: dpll_ddr_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-x2-clock";
-		clocks = <&dpll_ddr_ck>;
-	};
-
-	dpll_ddr_m4_ck: dpll_ddr_m4_ck@2db8 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_ddr_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2db8>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_clkdcoldo: dpll_per_clkdcoldo@2e14 {
-		#clock-cells = <0>;
-		compatible = "ti,fixed-factor-clock";
-		clocks = <&dpll_per_ck>;
-		ti,clock-mult = <1>;
-		ti,clock-div = <1>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2e14>;
-		ti,invert-autoidle-bit;
-	};
-
-	dll_aging_clk_div: dll_aging_clk_div@4250 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sys_clkin_ck>;
-		reg = <0x4250>;
-		ti,dividers = <8>, <16>, <32>;
-	};
-
-	div_core_25m_ck: div_core_25m_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sysclk_div>;
-		clock-mult = <1>;
-		clock-div = <8>;
-	};
-
-	func_12m_clk: func_12m_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <16>;
-	};
-
-	vtp_clk_div: vtp_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	usbphy_32khz_clkmux: usbphy_32khz_clkmux@4260 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>;
-		reg = <0x4260>;
-	};
-
-	usb_phy0_always_on_clk32k: usb_phy0_always_on_clk32k@2a40 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&usbphy_32khz_clkmux>;
-		ti,bit-shift = <8>;
-		reg = <0x2a40>;
-	};
-
-	usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k@2a48 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&usbphy_32khz_clkmux>;
-		ti,bit-shift = <8>;
-		reg = <0x2a48>;
-	};
-
-	clkout1_osc_div_ck: clkout1-osc-div-ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sys_clkin_ck>;
-		ti,bit-shift = <20>;
-		ti,max-div = <4>;
-		reg = <0x4100>;
-	};
-
-	clkout1_src2_mux_ck: clkout1-src2-mux-ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clk_rc32k_ck>, <&sysclk_div>, <&dpll_ddr_m2_ck>,
-			 <&dpll_per_m2_ck>, <&dpll_disp_m2_ck>,
-			 <&dpll_mpu_m2_ck>;
-		reg = <0x4100>;
-	};
-
-	clkout1_src2_pre_div_ck: clkout1-src2-pre-div-ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&clkout1_src2_mux_ck>;
-		ti,bit-shift = <4>;
-		ti,max-div = <8>;
-		reg = <0x4100>;
-	};
-
-	clkout1_src2_post_div_ck: clkout1-src2-post-div-ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&clkout1_src2_pre_div_ck>;
-		ti,bit-shift = <8>;
-		ti,max-div = <32>;
-		ti,index-power-of-two;
-		reg = <0x4100>;
-	};
-
-	clkout1_mux_ck: clkout1-mux-ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clkout1_osc_div_ck>, <&clk_rc32k_ck>,
-			 <&clkout1_src2_post_div_ck>, <&dpll_extdev_m2_ck>;
-		ti,bit-shift = <16>;
-		reg = <0x4100>;
-	};
-
-	clkout1_ck: clkout1-ck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkout1_mux_ck>;
-		ti,bit-shift = <23>;
-		reg = <0x4100>;
-	};
-};
-
-&prcm {
-	wkup_cm: wkup-cm@2800 {
-		compatible = "ti,omap4-cm";
-		reg = <0x2800 0x400>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x2800 0x400>;
-
-		l3s_tsc_clkctrl: l3s-tsc-clkctrl@120 {
-			compatible = "ti,clkctrl";
-			reg = <0x120 0x4>;
-			#clock-cells = <2>;
-		};
-
-		l4_wkup_aon_clkctrl: l4-wkup-aon-clkctrl@228 {
-			compatible = "ti,clkctrl";
-			reg = <0x228 0xc>;
-			#clock-cells = <2>;
-		};
-
-		l4_wkup_clkctrl: l4-wkup-clkctrl@220 {
-			compatible = "ti,clkctrl";
-			reg = <0x220 0x4>, <0x328 0x44>;
-			#clock-cells = <2>;
-		};
-
-	};
-
-	mpu_cm: mpu-cm@8300 {
-		compatible = "ti,omap4-cm";
-		reg = <0x8300 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x8300 0x100>;
-
-		mpu_clkctrl: mpu-clkctrl@20 {
-			compatible = "ti,clkctrl";
-			reg = <0x20 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-
-	gfx_l3_cm: gfx-l3-cm@8400 {
-		compatible = "ti,omap4-cm";
-		reg = <0x8400 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x8400 0x100>;
-
-		gfx_l3_clkctrl: gfx-l3-clkctrl@20 {
-			compatible = "ti,clkctrl";
-			reg = <0x20 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-
-	l4_rtc_cm: l4-rtc-cm@8500 {
-		compatible = "ti,omap4-cm";
-		reg = <0x8500 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x8500 0x100>;
-
-		l4_rtc_clkctrl: l4-rtc-clkctrl@20 {
-			compatible = "ti,clkctrl";
-			reg = <0x20 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-
-	per_cm: per-cm@8800 {
-		compatible = "ti,omap4-cm";
-		reg = <0x8800 0xc00>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x8800 0xc00>;
-
-		l3_clkctrl: l3-clkctrl@20 {
-			compatible = "ti,clkctrl";
-			reg = <0x20 0x3c>, <0x78 0x2c>;
-			#clock-cells = <2>;
-		};
-
-		l3s_clkctrl: l3s-clkctrl@68 {
-			compatible = "ti,clkctrl";
-			reg = <0x68 0xc>, <0x220 0x4c>;
-			#clock-cells = <2>;
-		};
-
-		pruss_ocp_clkctrl: pruss-ocp-clkctrl@320 {
-			compatible = "ti,clkctrl";
-			reg = <0x320 0x4>;
-			#clock-cells = <2>;
-		};
-
-		l4ls_clkctrl: l4ls-clkctrl@420 {
-			compatible = "ti,clkctrl";
-			reg = <0x420 0x1a4>;
-			#clock-cells = <2>;
-		};
-
-		emif_clkctrl: emif-clkctrl@720 {
-			compatible = "ti,clkctrl";
-			reg = <0x720 0x4>;
-			#clock-cells = <2>;
-		};
-
-		dss_clkctrl: dss-clkctrl@a20 {
-			compatible = "ti,clkctrl";
-			reg = <0xa20 0x4>;
-			#clock-cells = <2>;
-		};
-
-		cpsw_125mhz_clkctrl: cpsw-125mhz-clkctrl@b20 {
-			compatible = "ti,clkctrl";
-			reg = <0xb20 0x4>;
-			#clock-cells = <2>;
-		};
-
-	};
-};
diff --git a/arch/arm/boot/dts/amazon/Makefile b/arch/arm/boot/dts/amazon/Makefile
new file mode 100644
index 000000000000..58af5c4846ef
--- /dev/null
+++ b/arch/arm/boot/dts/amazon/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_ALPINE) += \
+	alpine-db.dtb
+dtb-$(CONFIG_ARCH_ALPINE) += \
+	alpine-db.dtb
diff --git a/arch/arm/boot/dts/alpine-db.dts b/arch/arm/boot/dts/amazon/alpine-db.dts
index dfb5a0802273..dfb5a0802273 100644
--- a/arch/arm/boot/dts/alpine-db.dts
+++ b/arch/arm/boot/dts/amazon/alpine-db.dts
diff --git a/arch/arm/boot/dts/alpine.dtsi b/arch/arm/boot/dts/amazon/alpine.dtsi
index 3b0675a1c460..90bd12feac01 100644
--- a/arch/arm/boot/dts/alpine.dtsi
+++ b/arch/arm/boot/dts/amazon/alpine.dtsi
@@ -126,7 +126,7 @@
 				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		uart0: uart@fd883000 {
+		uart0: serial@fd883000 {
 			compatible = "ns16550a";
 			reg = <0x0 0xfd883000 0x0 0x1000>;
 			clock-frequency = <375000000>;
@@ -135,7 +135,7 @@
 			reg-io-width = <4>;
 		};
 
-		uart1: uart@fd884000 {
+		uart1: serial@fd884000 {
 			compatible = "ns16550a";
 			reg = <0x0 0xfd884000 0x0 0x1000>;
 			clock-frequency = <375000000>;
@@ -154,7 +154,7 @@
 			reg = <0x0 0xfbc00000 0x0 0x100000>;
 			interrupt-map-mask = <0xf800 0 0 7>;
 			/* Add legacy interrupts for SATA devices only */
-			interrupt-map =	<0x4000 0 0 1 &gic 0 43 4>,
+			interrupt-map = <0x4000 0 0 1 &gic 0 43 4>,
 					<0x4800 0 0 1 &gic 0 44 4>;
 
 			/* 32 bit non prefetchable memory space */
@@ -167,7 +167,6 @@
 		msix: msix@fbe00000 {
 			compatible = "al,alpine-msix";
 			reg = <0x0 0xfbe00000 0x0 0x100000>;
-			interrupt-controller;
 			msi-controller;
 			al,msi-base-spi = <96>;
 			al,msi-num-spis = <64>;
diff --git a/arch/arm/boot/dts/amlogic/Makefile b/arch/arm/boot/dts/amlogic/Makefile
new file mode 100644
index 000000000000..3c8a1e88b386
--- /dev/null
+++ b/arch/arm/boot/dts/amlogic/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_MACH_MESON8) += \
+	meson8-minix-neo-x8.dtb \
+	meson8-fernsehfee3.dtb \
+	meson8b-ec100.dtb \
+	meson8b-mxq.dtb \
+	meson8b-odroidc1.dtb \
+	meson8m2-mxiii-plus.dtb
diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/amlogic/meson.dtsi
index 3be7cba603d5..28ec2c821cdc 100644
--- a/arch/arm/boot/dts/meson.dtsi
+++ b/arch/arm/boot/dts/amlogic/meson.dtsi
@@ -23,7 +23,7 @@
 		#size-cells = <1>;
 		ranges;
 
-		cbus: cbus@c1100000 {
+		cbus: bus@c1100000 {
 			compatible = "simple-bus";
 			reg = <0xc1100000 0x200000>;
 			#address-cells = <1>;
@@ -59,7 +59,7 @@
 			};
 
 			uart_A: serial@84c0 {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart";
 				reg = <0x84c0 0x18>;
 				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
 				fifo-size = <128>;
@@ -67,7 +67,7 @@
 			};
 
 			uart_B: serial@84dc {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart";
 				reg = <0x84dc 0x18>;
 				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
@@ -105,7 +105,7 @@
 			};
 
 			uart_C: serial@8700 {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart";
 				reg = <0x8700 0x18>;
 				interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
@@ -206,7 +206,7 @@
 			};
 		};
 
-		aobus: aobus@c8100000 {
+		aobus: bus@c8100000 {
 			compatible = "simple-bus";
 			reg = <0xc8100000 0x100000>;
 			#address-cells = <1>;
@@ -214,21 +214,21 @@
 			ranges = <0x0 0xc8100000 0x100000>;
 
 			ao_arc_rproc: remoteproc@1c {
-				compatible= "amlogic,meson-mx-ao-arc";
+				compatible = "amlogic,meson-mx-ao-arc";
 				reg = <0x1c 0x8>, <0x38 0x8>;
 				reg-names = "remap", "cpu";
 				status = "disabled";
 			};
 
 			ir_receiver: ir-receiver@480 {
-				compatible= "amlogic,meson6-ir";
+				compatible = "amlogic,meson6-ir";
 				reg = <0x480 0x20>;
 				interrupts = <GIC_SPI 15 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};
 
 			uart_AO: serial@4c0 {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart";
 				reg = <0x4c0 0x18>;
 				interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
@@ -255,8 +255,6 @@
 
 		usb0: usb@c9040000 {
 			compatible = "snps,dwc2";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			reg = <0xc9040000 0x40000>;
 			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&usb0_phy>;
@@ -270,8 +268,6 @@
 
 		usb1: usb@c90c0000 {
 			compatible = "snps,dwc2";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			reg = <0xc90c0000 0x40000>;
 			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&usb1_phy>;
@@ -302,7 +298,7 @@
 			reg = <0xd9040000 0x10000>;
 		};
 
-		secbus: secbus@da000000 {
+		secbus: bus@da000000 {
 			compatible = "simple-bus";
 			reg = <0xda000000 0x6000>;
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/amlogic/meson8-fernsehfee3.dts b/arch/arm/boot/dts/amlogic/meson8-fernsehfee3.dts
new file mode 100644
index 000000000000..4e52447d51bd
--- /dev/null
+++ b/arch/arm/boot/dts/amlogic/meson8-fernsehfee3.dts
@@ -0,0 +1,306 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+// Copyright (C) 2025 J. Neuschäfer <j.ne@posteo.net>
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+
+#include "meson8.dtsi"
+
+/ {
+	model = "Fernsehfee 3.0";
+	compatible = "tcu,fernsehfee3", "amlogic,meson8";
+
+	aliases {
+		serial0 = &uart_AO;
+		gpiochip0 = &gpio;
+		gpiochip1 = &gpio_ao;
+		i2c0 = &i2c_AO;
+		i2c1 = &i2c_B;
+		mmc0 = &sdhc;
+		mmc1 = &sdio;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;  /* 1 GiB */
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		power-button {
+			label = "Power button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			/*
+			 * The power LED can be turned red, otherwise it is green.
+			 */
+			gpios = <&gpio_ao GPIO_TEST_N GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_RED>;
+		};
+	};
+
+	vcc_5v: regulator-5v {
+		/* 5V rail, always on as long as the system is running */
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-3v3 {
+		/* Chipown AP2420 step-down converter */
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_5v>;
+	};
+
+	wifi_3v3: regulator-wifi {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V-WIFI";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3>;
+		gpio = <&gpio GPIOX_11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vcck>;
+};
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rmii";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			/* IC Plus IP101A (0x02430c54) */
+			reg = <0>;
+
+			reset-assert-us = <10000>;
+			reset-deassert-us = <10000>;
+			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c_AO {
+	status = "okay";
+	pinctrl-0 = <&i2c_ao_pins>;
+	pinctrl-names = "default";
+
+	pmic@32 {
+		compatible = "ricoh,rn5t618";
+		reg = <0x32>;
+		system-power-controller;
+
+		regulators {
+			vcck: DCDC1 {
+				regulator-name = "VCCK";
+				regulator-min-microvolt = <825000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vddee: DCDC2 {
+				/* the output is also used as VDDAO */
+				regulator-name = "VDD_EE";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			DCDC3 {
+				regulator-name = "VDD_DDR";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO1 {
+				regulator-name = "VDDIO_AO28";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO2 {
+				regulator-name = "VDDIO_AO18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vcc1v8_usb: LDO3 {
+				regulator-name = "VCC1V8_USB";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			LDO4 {
+				/* This one appears to be unused */
+				regulator-name = "VCC2V8";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <2850000>;
+			};
+
+			LDO5 {
+				regulator-name = "AVDD1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDORTC1 {
+				regulator-name = "VDD_LDO";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <2700000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDORTC2 {
+				regulator-name = "RTC_0V9";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	eeprom@50 {
+		/* Fairchild FM24C08A */
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		pagesize = <16>;
+		wp-gpios = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>;
+		num-addresses = <4>;
+	};
+};
+
+&i2c_B {
+	status = "okay";
+	pinctrl-0 = <&i2c_b_pins>;
+	pinctrl-names = "default";
+
+	/* TODO: SiI9293 HDMI receiver @ 0x39 */
+};
+
+&mali {
+	mali-supply = <&vddee>;
+};
+
+&sdhc {
+	status = "okay";
+	pinctrl-0 = <&sdxc_c_pins>;
+	pinctrl-names = "default";
+
+	/* eMMC */
+	bus-width = <8>;
+	max-frequency = <100000000>;
+
+	disable-wp;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	no-sdio;
+
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_3v3>;
+};
+
+&sdio {
+	status = "okay";
+	pinctrl-0 = <&sd_b_pins>;
+
+	/* SD card */
+	slot@1 {
+		compatible = "mmc-slot";
+		reg = <1>;
+		status = "okay";
+
+		bus-width = <4>;
+		cap-mmc-highspeed;
+		cap-sd-highspeed;
+		disable-wp;
+
+		cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+		vmmc-supply = <&vcc_3v3>;
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+	phy-supply = <&vcc1v8_usb>;
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	wifi: wifi@1 {
+		/* Realtek RTL8188 2.4GHz WiFi module */
+		compatible = "usbbda,179";
+		reg = <1>;
+		vdd-supply = <&wifi_3v3>;
+	};
+};
+
+&usb1_phy {
+	status = "okay";
+	phy-supply = <&vcc1v8_usb>;
+};
+
+&ir_receiver {
+	status = "okay";
+	pinctrl-0 = <&ir_recv_pins>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm/boot/dts/meson8-minix-neo-x8.dts b/arch/arm/boot/dts/amlogic/meson8-minix-neo-x8.dts
index 61ec929ab86e..62987eadc747 100644
--- a/arch/arm/boot/dts/meson8-minix-neo-x8.dts
+++ b/arch/arm/boot/dts/amlogic/meson8-minix-neo-x8.dts
@@ -19,7 +19,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@40000000 {
 		device_type = "memory";
 		reg = <0x40000000 0x80000000>;
 	};
@@ -27,7 +27,7 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		blue {
+		led-blue {
 			label = "x8:blue:power";
 			gpios = <&gpio_ao GPIO_TEST_N GPIO_ACTIVE_HIGH>;
 		};
@@ -65,7 +65,7 @@
 	pinctrl-0 = <&spi_nor_pins>;
 	pinctrl-names = "default";
 
-	spi-flash@0 {
+	flash@0 {
 		compatible = "mxicy,mx25l1606e";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -93,5 +93,6 @@
 &ethmac {
 	status = "okay";
 	pinctrl-0 = <&eth_pins>;
-	pnictrl-names = "default";
+	pinctrl-names = "default";
+	phy-mode = "rmii";
 };
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/amlogic/meson8.dtsi
index f80ddc98d3a2..a609b5a0fda4 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/amlogic/meson8.dtsi
@@ -133,7 +133,7 @@
 		};
 	};
 
-	gpu_opp_table: gpu-opp-table {
+	gpu_opp_table: opp-table-gpu {
 		compatible = "operating-points-v2";
 
 		opp-182142857 {
@@ -196,7 +196,7 @@
 	};
 
 	thermal-zones {
-		soc {
+		soc-thermal {
 			polling-delay-passive = <250>; /* milliseconds */
 			polling-delay = <1000>; /* milliseconds */
 			thermal-sensors = <&thermal_sensor>;
@@ -346,17 +346,16 @@
 		reg = <0xe0 0x18>;
 	};
 
-	pinctrl_aobus: pinctrl@84 {
+	pinctrl_aobus: pinctrl@14 {
 		compatible = "amlogic,meson8-aobus-pinctrl";
-		reg = <0x84 0xc>;
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges;
+		ranges = <0x0 0x14 0x1c>;
 
-		gpio_ao: ao-bank@14 {
-			reg = <0x14 0x4>,
-			      <0x2c 0x4>,
-			      <0x24 0x8>;
+		gpio_ao: bank@0 {
+			reg = <0x0 0x4>,
+			      <0x18 0x4>,
+			      <0x10 0x8>;
 			reg-names = "mux", "pull", "gpio";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -399,7 +398,7 @@
 			mux {
 				groups = "uart_tx_ao_a", "uart_rx_ao_a";
 				function = "uart_ao";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -430,7 +429,7 @@
 };
 
 &ao_arc_rproc {
-	compatible= "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc";
+	compatible = "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc";
 	amlogic,secbus2 = <&secbus2>;
 	sram = <&ao_arc_sram>;
 	resets = <&reset RESET_MEDIA_CPU>;
@@ -450,7 +449,11 @@
 	};
 
 	pwm_ef: pwm@86c0 {
-		compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm";
+		compatible = "amlogic,meson8-pwm-v2";
+		clocks = <&xtal>,
+			 <0>, /* unknown/untested, the datasheet calls it "Video PLL" */
+			 <&clkc CLKID_FCLK_DIV4>,
+			 <&clkc CLKID_FCLK_DIV3>;
 		reg = <0x86c0 0x10>;
 		#pwm-cells = <3>;
 		status = "disabled";
@@ -461,24 +464,31 @@
 		reg = <0x8758 0x1c>;
 	};
 
-	pinctrl_cbus: pinctrl@9880 {
+	pinctrl_cbus: pinctrl@8030 {
 		compatible = "amlogic,meson8-cbus-pinctrl";
-		reg = <0x9880 0x10>;
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges;
+		ranges = <0x0 0x8030 0x108>;
 
-		gpio: banks@80b0 {
-			reg = <0x80b0 0x28>,
-			      <0x80e8 0x18>,
-			      <0x8120 0x18>,
-			      <0x8030 0x30>;
+		gpio: bank@80 {
+			reg = <0x80 0x28>,
+			      <0xb8 0x18>,
+			      <0xf0 0x18>,
+			      <0x00 0x30>;
 			reg-names = "mux", "pull", "pull-enable", "gpio";
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-ranges = <&pinctrl_cbus 0 0 120>;
 		};
 
+		i2c_b_pins: i2c-b {
+			mux {
+				groups = "i2c_sda_b", "i2c_sck_b";
+				function = "i2c_b";
+				bias-disable;
+			};
+		};
+
 		sd_a_pins: sd-a {
 			mux {
 				groups = "sd_d0_a", "sd_d1_a", "sd_d2_a",
@@ -506,6 +516,15 @@
 			};
 		};
 
+		sdxc_a_pins: sdxc-a {
+			mux {
+				groups = "sdxc_d0_a", "sdxc_d13_a",
+					 "sdxc_clk_a", "sdxc_cmd_a";
+				function = "sdxc_a";
+				bias-pull-up;
+			};
+		};
+
 		sdxc_b_pins: sdxc-b {
 			mux {
 				groups = "sdxc_d0_b", "sdxc_d13_b",
@@ -515,6 +534,16 @@
 			};
 		};
 
+		sdxc_c_pins: sdxc-c {
+			mux {
+				groups = "sdxc_d0_c", "sdxc_d13_c",
+					"sdxc_clk_c", "sdxc_cmd_c",
+					"sdxc_d47_c";
+				function = "sdxc_c";
+				bias-pull-up;
+			};
+		};
+
 		spdif_out_pins: spdif-out {
 			mux {
 				groups = "spdif_out";
@@ -556,7 +585,7 @@
 				groups = "uart_tx_a1",
 				       "uart_rx_a1";
 				function = "uart_a";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -568,11 +597,19 @@
 				bias-disable;
 			};
 		};
+
+		xtal_32k_out_pins: xtal-32k-out {
+			mux {
+				groups = "xtal_32k_out";
+				function = "xtal";
+				bias-disable;
+			};
+		};
 	};
 };
 
 &ahb_sram {
-	ao_arc_sram: ao-arc-sram@0 {
+	ao_arc_sram: aoarc-sram@0 {
 		compatible = "amlogic,meson8-ao-arc-sram";
 		reg = <0x0 0x8000>;
 		pool;
@@ -628,7 +665,6 @@
 };
 
 &hwrng {
-	compatible = "amlogic,meson8-rng", "amlogic,meson-rng";
 	clocks = <&clkc CLKID_RNG0>;
 	clock-names = "core";
 };
@@ -651,6 +687,9 @@
 	arm,filter-ranges = <0x100000 0xc0000000>;
 	prefetch-data = <1>;
 	prefetch-instr = <1>;
+	arm,prefetch-offset = <7>;
+	arm,double-linefill = <1>;
+	arm,prefetch-drop = <1>;
 	arm,shared-override;
 };
 
@@ -682,11 +721,19 @@
 };
 
 &pwm_ab {
-	compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm";
+	compatible = "amlogic,meson8-pwm-v2";
+	clocks = <&xtal>,
+		 <0>, /* unknown/untested, the datasheet calls it "Video PLL" */
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>;
 };
 
 &pwm_cd {
-	compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm";
+	compatible = "amlogic,meson8-pwm-v2";
+	clocks = <&xtal>,
+		 <0>, /* unknown/untested, the datasheet calls it "Video PLL" */
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>;
 };
 
 &rtc {
@@ -736,27 +783,27 @@
 };
 
 &uart_AO {
-	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_CLK81>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8-uart", "amlogic,meson-ao-uart";
+	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_A {
-	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART0>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_B {
-	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART1>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART1>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_C {
-	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART2>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART2>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &usb0 {
diff --git a/arch/arm/boot/dts/meson8b-ec100.dts b/arch/arm/boot/dts/amlogic/meson8b-ec100.dts
index 77d4beeb8010..236999548094 100644
--- a/arch/arm/boot/dts/meson8b-ec100.dts
+++ b/arch/arm/boot/dts/amlogic/meson8b-ec100.dts
@@ -22,7 +22,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@40000000 {
 		device_type = "memory";
 		reg = <0x40000000 0x40000000>;
 	};
@@ -34,8 +34,6 @@
 
 	gpio-keys {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <100>;
 
 		pal-switch {
@@ -73,7 +71,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power {
+		led-power {
 			label = "ec100:red:power";
 			/*
 			 * Needs to go LOW (together with the poweroff GPIO)
@@ -100,6 +98,10 @@
 		compatible = "amlogic,gx-sound-card";
 		model = "M8B-EC100";
 
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
@@ -429,7 +431,7 @@
 			  "NAND_CS1 (EMMC)", "NAND_CS2 iNAND_RS1 (EMMC)",
 			  "NAND_nR/B iNAND_CMD (EMMC)", "NAND_ALE (EMMC)",
 			  "NAND_CLE (EMMC)", "nRE_S1 NAND_nRE (EMMC)",
-			  "nWE_S1 NAND_nWE (EMMC)",  "", "", "SPI_CS",
+			  "nWE_S1 NAND_nWE (EMMC)",  "", "", "", "SPI_CS",
 			  /* Bank DIF */
 			  "RMII_RXD1", "RMII_RXD0", "RMII_CRS_DV",
 			  "RMII_50M_IN", "GPIODIF_4", "GPIODIF_5",
@@ -441,8 +443,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>, <&xtal>;
-	clock-names = "clkin0", "clkin1";
 };
 
 &rtc {
diff --git a/arch/arm/boot/dts/meson8b-mxq.dts b/arch/arm/boot/dts/amlogic/meson8b-mxq.dts
index 7adedd3258c3..0bca0b33eea2 100644
--- a/arch/arm/boot/dts/meson8b-mxq.dts
+++ b/arch/arm/boot/dts/amlogic/meson8b-mxq.dts
@@ -22,7 +22,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@40000000 {
 		device_type = "memory";
 		reg = <0x40000000 0x40000000>;
 	};
@@ -162,8 +162,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>, <&xtal>;
-	clock-names = "clkin0", "clkin1";
 };
 
 &uart_AO {
diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/amlogic/meson8b-odroidc1.dts
index 04356bc639fa..1cd2093202ca 100644
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/amlogic/meson8b-odroidc1.dts
@@ -22,7 +22,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@40000000 {
 		device_type = "memory";
 		reg = <0x40000000 0x40000000>;
 	};
@@ -34,7 +34,7 @@
 
 	leds {
 		compatible = "gpio-leds";
-		blue {
+		led-blue {
 			label = "c1:blue:alive";
 			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
@@ -281,19 +281,6 @@
 			  "J7 Header Pin 6", "J7 Header Pin 5",
 			  "J7 Header Pin 7", "HDMI_CEC",
 			  "SYS_LED", "", "";
-
-	/*
-	 * WARNING: The USB Hub on the Odroid-C1/C1+ needs a reset signal
-	 * to be turned high in order to be detected by the USB Controller.
-	 * This signal should be handled by a USB specific power sequence
-	 * in order to reset the Hub when USB bus is powered down.
-	 */
-	usb-hub {
-		gpio-hog;
-		gpios = <GPIOAO_4 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "usb-hub-reset";
-	};
 };
 
 &ir_receiver {
@@ -360,8 +347,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>, <&xtal>;
-	clock-names = "clkin0", "clkin1";
 };
 
 &rtc {
@@ -381,5 +366,16 @@
 };
 
 &usb1 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
+
+	hub@1 {
+		/* Genesys Logic GL852G usb hub */
+		compatible = "usb5e3,610";
+		reg = <1>;
+		vdd-supply = <&p5v0>;
+		reset-gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
+	};
 };
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/amlogic/meson8b.dtsi
index b49b7cbaed4e..2d77b9876bf4 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/amlogic/meson8b.dtsi
@@ -125,7 +125,7 @@
 		};
 	};
 
-	gpu_opp_table: gpu-opp-table {
+	gpu_opp_table: opp-table-gpu {
 		compatible = "operating-points-v2";
 
 		opp-255000000 {
@@ -173,7 +173,7 @@
 	};
 
 	thermal-zones {
-		soc {
+		soc-thermal {
 			polling-delay-passive = <250>; /* milliseconds */
 			polling-delay = <1000>; /* milliseconds */
 			thermal-sensors = <&thermal_sensor>;
@@ -308,17 +308,16 @@
 		reg = <0xe0 0x18>;
 	};
 
-	pinctrl_aobus: pinctrl@84 {
+	pinctrl_aobus: pinctrl@14 {
 		compatible = "amlogic,meson8b-aobus-pinctrl";
-		reg = <0x84 0xc>;
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges;
+		ranges = <0x0 0x14 0x1c>;
 
-		gpio_ao: ao-bank@14 {
-			reg = <0x14 0x4>,
-				<0x2c 0x4>,
-				<0x24 0x8>;
+		gpio_ao: bank@0 {
+			reg = <0x0 0x4>,
+			      <0x18 0x4>,
+			      <0x10 0x8>;
 			reg-names = "mux", "pull", "gpio";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -369,7 +368,7 @@
 			mux {
 				groups = "uart_tx_ao_a", "uart_rx_ao_a";
 				function = "uart_ao";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -384,7 +383,7 @@
 };
 
 &ao_arc_rproc {
-	compatible= "amlogic,meson8b-ao-arc", "amlogic,meson-mx-ao-arc";
+	compatible = "amlogic,meson8b-ao-arc", "amlogic,meson-mx-ao-arc";
 	amlogic,secbus2 = <&secbus2>;
 	sram = <&ao_arc_sram>;
 	resets = <&reset RESET_MEDIA_CPU>;
@@ -404,8 +403,12 @@
 	};
 
 	pwm_ef: pwm@86c0 {
-		compatible = "amlogic,meson8b-pwm";
+		compatible = "amlogic,meson8b-pwm-v2", "amlogic,meson8-pwm-v2";
 		reg = <0x86c0 0x10>;
+		clocks = <&xtal>,
+			 <0>, /* unknown/untested, the datasheet calls it "Video PLL" */
+			 <&clkc CLKID_FCLK_DIV4>,
+			 <&clkc CLKID_FCLK_DIV3>;
 		#pwm-cells = <3>;
 		status = "disabled";
 	};
@@ -415,18 +418,17 @@
 		reg = <0x8758 0x1c>;
 	};
 
-	pinctrl_cbus: pinctrl@9880 {
+	pinctrl_cbus: pinctrl@8030 {
 		compatible = "amlogic,meson8b-cbus-pinctrl";
-		reg = <0x9880 0x10>;
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges;
+		ranges = <0x0 0x8030 0x108>;
 
-		gpio: banks@80b0 {
-			reg = <0x80b0 0x28>,
-				<0x80e8 0x18>,
-				<0x8120 0x18>,
-				<0x8030 0x38>;
+		gpio: bank@80 {
+			reg = <0x80 0x28>,
+			      <0xb8 0x18>,
+			      <0xf0 0x18>,
+			      <0x00 0x38>;
 			reg-names = "mux", "pull", "pull-enable", "gpio";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -519,7 +521,7 @@
 				groups = "uart_tx_b0",
 				       "uart_rx_b0";
 				function = "uart_b";
-				bias-disable;
+				bias-pull-up;
 			};
 		};
 
@@ -535,7 +537,7 @@
 };
 
 &ahb_sram {
-	ao_arc_sram: ao-arc-sram@0 {
+	ao_arc_sram: aoarc-sram@0 {
 		compatible = "amlogic,meson8b-ao-arc-sram";
 		reg = <0x0 0x8000>;
 		pool;
@@ -580,8 +582,8 @@
 };
 
 &gpio_intc {
-	compatible = "amlogic,meson-gpio-intc",
-		     "amlogic,meson8b-gpio-intc";
+	compatible = "amlogic,meson8b-gpio-intc",
+		     "amlogic,meson-gpio-intc";
 	status = "okay";
 };
 
@@ -620,7 +622,6 @@
 };
 
 &hwrng {
-	compatible = "amlogic,meson8b-rng", "amlogic,meson-rng";
 	clocks = <&clkc CLKID_RNG0>;
 	clock-names = "core";
 };
@@ -643,6 +644,9 @@
 	arm,filter-ranges = <0x100000 0xc0000000>;
 	prefetch-data = <1>;
 	prefetch-instr = <1>;
+	arm,prefetch-offset = <7>;
+	arm,double-linefill = <1>;
+	arm,prefetch-drop = <1>;
 	arm,shared-override;
 };
 
@@ -674,11 +678,19 @@
 };
 
 &pwm_ab {
-	compatible = "amlogic,meson8b-pwm";
+	compatible = "amlogic,meson8b-pwm-v2", "amlogic,meson8-pwm-v2";
+	clocks = <&xtal>,
+		 <0>, /* unknown/untested, the datasheet calls it "Video PLL" */
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>;
 };
 
 &pwm_cd {
-	compatible = "amlogic,meson8b-pwm";
+	compatible = "amlogic,meson8b-pwm-v2", "amlogic,meson8-pwm-v2";
+	clocks = <&xtal>,
+		 <0>, /* unknown/untested, the datasheet calls it "Video PLL" */
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>;
 };
 
 &rtc {
@@ -724,27 +736,27 @@
 };
 
 &uart_AO {
-	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_CLK81>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8b-uart", "amlogic,meson-ao-uart";
+	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_A {
-	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART0>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_B {
-	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART1>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART1>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_C {
-	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART2>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART2>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &usb0 {
diff --git a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts b/arch/arm/boot/dts/amlogic/meson8m2-mxiii-plus.dts
index fa6d55f1cfb9..08aa661e17ad 100644
--- a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
+++ b/arch/arm/boot/dts/amlogic/meson8m2-mxiii-plus.dts
@@ -19,7 +19,6 @@
 		ethernet0 = &ethmac;
 		i2c0 = &i2c_AO;
 		serial0 = &uart_AO;
-		serial1 = &uart_A;
 		mmc0 = &sd_card_slot;
 	};
 
@@ -27,7 +26,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@40000000 {
 		device_type = "memory";
 		reg = <0x40000000 0x80000000>;
 	};
@@ -45,12 +44,32 @@
 		};
 	};
 
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+
+		pinctrl-0 = <&xtal_32k_out_pins>;
+		pinctrl-names = "default";
+
+		reset-gpios = <&gpio GPIOX_11 GPIO_ACTIVE_LOW>,
+			      <&gpio_ao GPIOAO_6 GPIO_ACTIVE_LOW>;
+
+		clocks = <&xtal_32k_out>;
+		clock-names = "ext_clock";
+	};
+
 	vcc_3v3: regulator-vcc3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
+
+	xtal_32k_out: xtal-32k-out-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xtal_32k_out";
+	};
 };
 
 &cpu0 {
@@ -192,6 +211,27 @@
 	vref-supply = <&vddio_ao1v8>;
 };
 
+/* SDIO wifi */
+&sdhc {
+	status = "okay";
+
+	pinctrl-0 = <&sdxc_a_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <4>;
+	max-frequency = <50000000>;
+
+	disable-wp;
+	non-removable;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_3v3>;
+};
+
 &sdio {
 	status = "okay";
 
@@ -222,6 +262,12 @@
 	pinctrl-0 = <&uart_a1_pins>, <&uart_a1_cts_rts_pins>;
 	pinctrl-names = "default";
 	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm20702a1";
+		shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+	};
 };
 
 &uart_AO {
diff --git a/arch/arm/boot/dts/meson8m2.dtsi b/arch/arm/boot/dts/amlogic/meson8m2.dtsi
index 6725dd9fd825..6725dd9fd825 100644
--- a/arch/arm/boot/dts/meson8m2.dtsi
+++ b/arch/arm/boot/dts/amlogic/meson8m2.dtsi
diff --git a/arch/arm/boot/dts/arm/Makefile b/arch/arm/boot/dts/arm/Makefile
new file mode 100644
index 000000000000..07ebb64e2cd0
--- /dev/null
+++ b/arch/arm/boot/dts/arm/Makefile
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_INTEGRATOR) += \
+	integratorap.dtb \
+	integratorap-im-pd1.dtb \
+	integratorcp.dtb
+dtb-$(CONFIG_ARCH_MPS2) += \
+	mps2-an385.dtb \
+	mps2-an399.dtb
+dtb-$(CONFIG_ARCH_REALVIEW) += \
+	arm-realview-pb1176.dtb \
+	arm-realview-pb11mp.dtb \
+	arm-realview-eb.dtb \
+	arm-realview-eb-bbrevd.dtb \
+	arm-realview-eb-11mp.dtb \
+	arm-realview-eb-11mp-bbrevd.dtb \
+	arm-realview-eb-11mp-ctrevb.dtb \
+	arm-realview-eb-11mp-bbrevd-ctrevb.dtb \
+	arm-realview-eb-a9mp.dtb \
+	arm-realview-eb-a9mp-bbrevd.dtb \
+	arm-realview-pba8.dtb \
+	arm-realview-pbx-a9.dtb
+dtb-$(CONFIG_ARCH_VERSATILE) += \
+	versatile-ab.dtb \
+	versatile-ab-ib2.dtb \
+	versatile-pb.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += \
+	vexpress-v2p-ca5s.dtb \
+	vexpress-v2p-ca9.dtb \
+	vexpress-v2p-ca15-tc1.dtb \
+	vexpress-v2p-ca15_a7.dtb
diff --git a/arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd-ctrevb.dts b/arch/arm/boot/dts/arm/arm-realview-eb-11mp-bbrevd-ctrevb.dts
index e18769df9fd9..e18769df9fd9 100644
--- a/arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd-ctrevb.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-11mp-bbrevd-ctrevb.dts
diff --git a/arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd.dts b/arch/arm/boot/dts/arm/arm-realview-eb-11mp-bbrevd.dts
index 26b1c69e9f43..26b1c69e9f43 100644
--- a/arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-11mp-bbrevd.dts
diff --git a/arch/arm/boot/dts/arm-realview-eb-11mp-ctrevb.dts b/arch/arm/boot/dts/arm/arm-realview-eb-11mp-ctrevb.dts
index e68527b0d552..e68527b0d552 100644
--- a/arch/arm/boot/dts/arm-realview-eb-11mp-ctrevb.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-11mp-ctrevb.dts
diff --git a/arch/arm/boot/dts/arm-realview-eb-11mp.dts b/arch/arm/boot/dts/arm/arm-realview-eb-11mp.dts
index aac1edd4b227..aac1edd4b227 100644
--- a/arch/arm/boot/dts/arm-realview-eb-11mp.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-11mp.dts
diff --git a/arch/arm/boot/dts/arm-realview-eb-a9mp-bbrevd.dts b/arch/arm/boot/dts/arm/arm-realview-eb-a9mp-bbrevd.dts
index 42efac7496ef..42efac7496ef 100644
--- a/arch/arm/boot/dts/arm-realview-eb-a9mp-bbrevd.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-a9mp-bbrevd.dts
diff --git a/arch/arm/boot/dts/arm-realview-eb-a9mp.dts b/arch/arm/boot/dts/arm/arm-realview-eb-a9mp.dts
index 967684b3636c..967684b3636c 100644
--- a/arch/arm/boot/dts/arm-realview-eb-a9mp.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-a9mp.dts
diff --git a/arch/arm/boot/dts/arm-realview-eb-bbrevd.dts b/arch/arm/boot/dts/arm/arm-realview-eb-bbrevd.dts
index f533c8b49d97..f533c8b49d97 100644
--- a/arch/arm/boot/dts/arm-realview-eb-bbrevd.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-bbrevd.dts
diff --git a/arch/arm/boot/dts/arm-realview-eb-bbrevd.dtsi b/arch/arm/boot/dts/arm/arm-realview-eb-bbrevd.dtsi
index a79e1d1d30a7..7f62aef9ca8a 100644
--- a/arch/arm/boot/dts/arm-realview-eb-bbrevd.dtsi
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-bbrevd.dtsi
@@ -22,7 +22,7 @@
 
 / {
 	/* Introduce a fixed regulator for the new ethernet controller */
-	veth: fixedregulator@0 {
+	veth: regulator-veth {
 		compatible = "regulator-fixed";
 		regulator-name = "veth";
 		regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/arm-realview-eb-mp.dtsi b/arch/arm/boot/dts/arm/arm-realview-eb-mp.dtsi
index 26783d053ac7..40f7515aa068 100644
--- a/arch/arm/boot/dts/arm-realview-eb-mp.dtsi
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-mp.dtsi
@@ -103,7 +103,7 @@
 		};
 
 		/* PMU with one IRQ line per core */
-		pmu: pmu@0 {
+		pmu: pmu {
 			compatible = "arm,arm11mpcore-pmu";
 			interrupt-parent = <&intc>;
 			interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm/boot/dts/arm-realview-eb.dts b/arch/arm/boot/dts/arm/arm-realview-eb.dts
index 15431077f00c..15431077f00c 100644
--- a/arch/arm/boot/dts/arm-realview-eb.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-eb.dts
diff --git a/arch/arm/boot/dts/arm-realview-eb.dtsi b/arch/arm/boot/dts/arm/arm-realview-eb.dtsi
index 04e8a27ba1eb..16f784da5a55 100644
--- a/arch/arm/boot/dts/arm-realview-eb.dtsi
+++ b/arch/arm/boot/dts/arm/arm-realview-eb.dtsi
@@ -45,7 +45,7 @@
 	};
 
 	/* The voltage to the MMC card is hardwired at 3.3V */
-	vmmc: fixedregulator@0 {
+	vmmc: regulator-vmmc {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmc";
 		regulator-min-microvolt = <3300000>;
@@ -53,13 +53,13 @@
 		regulator-boot-on;
         };
 
-	xtal24mhz: xtal24mhz@24M {
+	xtal24mhz: mclk: kmiclk: sspclk: uartclk: wdogclk: clock-24000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <24000000>;
 	};
 
-	timclk: timclk@1M {
+	timclk: clock-1000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
 		clock-div = <24>;
@@ -67,48 +67,8 @@
 		clocks = <&xtal24mhz>;
 	};
 
-	mclk: mclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	kmiclk: kmiclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	sspclk: sspclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	uartclk: uartclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	wdogclk: wdogclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
 	/* FIXME: this actually hangs off the PLL clocks */
-	pclk: pclk@0 {
+	pclk: clock-pclk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <0>;
@@ -198,96 +158,112 @@
 		syscon: syscon@10000000 {
 			compatible = "arm,realview-eb-syscon", "syscon", "simple-mfd";
 			reg = <0x10000000 0x1000>;
+			ranges = <0x0 0x10000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 
-			led@08.0 {
+			led@8,0 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x01>;
 				label = "versatile:0";
 				linux,default-trigger = "heartbeat";
 				default-state = "on";
 			};
-			led@08.1 {
+			led@8,1 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x02>;
 				label = "versatile:1";
 				linux,default-trigger = "mmc0";
 				default-state = "off";
 			};
-			led@08.2 {
+			led@8,2 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x04>;
 				label = "versatile:2";
 				linux,default-trigger = "cpu0";
 				default-state = "off";
 			};
-			led@08.3 {
+			led@8,3 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x08>;
 				label = "versatile:3";
 				default-state = "off";
 			};
-			led@08.4 {
+			led@8,4 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x10>;
 				label = "versatile:4";
 				default-state = "off";
 			};
-			led@08.5 {
+			led@8,5 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x20>;
 				label = "versatile:5";
 				default-state = "off";
 			};
-			led@08.6 {
+			led@8,6 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x40>;
 				label = "versatile:6";
 				default-state = "off";
 			};
-			led@08.7 {
+			led@8,7 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x80>;
 				label = "versatile:7";
 				default-state = "off";
 			};
-			oscclk0: osc0@0c {
+			oscclk0: clock-controller@c {
 				compatible = "arm,syscon-icst307";
+				reg = <0x0c 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x0C>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk1: osc1@10 {
+			oscclk1: clock-controller@10 {
 				compatible = "arm,syscon-icst307";
+				reg = <0x10 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x10>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk2: osc2@14 {
+			oscclk2: clock-controller@14 {
 				compatible = "arm,syscon-icst307";
+				reg = <0x14 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x14>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk3: osc3@18 {
+			oscclk3: clock-controller@18 {
 				compatible = "arm,syscon-icst307";
+				reg = <0x18 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x18>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk4: osc4@1c {
+			oscclk4: clock-controller@1c {
 				compatible = "arm,syscon-icst307";
+				reg = <0x1c 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x1c>;
@@ -383,7 +359,7 @@
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x1000d000 0x1000>;
 			clocks = <&sspclk>, <&pclk>;
-			clock-names = "SSPCLK", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 		};
 
 		wdog: watchdog@10010000 {
diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm/arm-realview-pb1176.dts
index 366687fb1ee3..b9b10cbd65aa 100644
--- a/arch/arm/boot/dts/arm-realview-pb1176.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-pb1176.dts
@@ -63,13 +63,13 @@
 		regulator-boot-on;
 	};
 
-	xtal24mhz: xtal24mhz@24M {
+	xtal24mhz: mclk: kmiclk: sspclk: uartclk: clock-24000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <24000000>;
 	};
 
-	timclk: timclk@1M {
+	timclk: clock-1000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
 		clock-div = <24>;
@@ -77,40 +77,8 @@
 		clocks = <&xtal24mhz>;
 	};
 
-	mclk: mclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	kmiclk: kmiclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	sspclk: sspclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	uartclk: uartclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
 	/* FIXME: this actually hangs off the PLL clocks */
-	pclk: pclk@0 {
+	pclk: clock-pclk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <0>;
@@ -216,96 +184,112 @@
 		syscon: syscon@10000000 {
 			compatible = "arm,realview-pb1176-syscon", "syscon", "simple-mfd";
 			reg = <0x10000000 0x1000>;
+			ranges = <0x0 0x10000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 
-			led@08.0 {
+			led@8,0 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x01>;
 				label = "versatile:0";
 				linux,default-trigger = "heartbeat";
 				default-state = "on";
 			};
-			led@08.1 {
+			led@8,1 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x02>;
 				label = "versatile:1";
 				linux,default-trigger = "mmc0";
 				default-state = "off";
 			};
-			led@08.2 {
+			led@8,2 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x04>;
 				label = "versatile:2";
 				linux,default-trigger = "cpu0";
 				default-state = "off";
 			};
-			led@08.3 {
+			led@8,3 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x08>;
 				label = "versatile:3";
 				default-state = "off";
 			};
-			led@08.4 {
+			led@8,4 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x10>;
 				label = "versatile:4";
 				default-state = "off";
 			};
-			led@08.5 {
+			led@8,5 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x20>;
 				label = "versatile:5";
 				default-state = "off";
 			};
-			led@08.6 {
+			led@8,6 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x40>;
 				label = "versatile:6";
 				default-state = "off";
 			};
-			led@08.7 {
+			led@8,7 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x80>;
 				label = "versatile:7";
 				default-state = "off";
 			};
-			oscclk0: osc0@0c {
+			oscclk0: clock-controller@c {
 				compatible = "arm,syscon-icst307";
+				reg = <0x0c 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x0C>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk1: osc1@10 {
+			oscclk1: clock-controller@10 {
 				compatible = "arm,syscon-icst307";
+				reg = <0x10 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x10>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk2: osc2@14 {
+			oscclk2: clock-controller@14 {
 				compatible = "arm,syscon-icst307";
+				reg = <0x14 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x14>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk3: osc3@18 {
+			oscclk3: clock-controller@18 {
 				compatible = "arm,syscon-icst307";
+				reg = <0x18 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x18>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk4: osc4@1c {
+			oscclk4: clock-controller@1c {
 				compatible = "arm,syscon-icst307";
+				reg = <0x1c 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x1c>;
@@ -394,7 +378,7 @@
 			interrupt-parent = <&intc_dc1176>;
 			interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&sspclk>, <&pclk>;
-			clock-names = "SSPCLK", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 		};
 
 		pb1176_serial0: serial@1010c000 {
@@ -435,7 +419,7 @@
 
 		/* Direct-mapped development chip ROM */
 		pb1176_rom@10200000 {
-			compatible = "direct-mapped";
+			compatible = "mtd-rom";
 			reg = <0x10200000 0x4000>;
 			bank-width = <1>;
 		};
diff --git a/arch/arm/boot/dts/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm/arm-realview-pb11mp.dts
index 228a51a38f95..db1b6793cd2c 100644
--- a/arch/arm/boot/dts/arm-realview-pb11mp.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-pb11mp.dts
@@ -92,7 +92,7 @@
 		      <0x1f000100 0x100>;
 	};
 
-	L2: cache-controller {
+	L2: cache-controller@1f002000 {
 		compatible = "arm,l220-cache";
 		reg = <0x1f002000 0x1000>;
 		interrupt-parent = <&intc_tc11mp>;
@@ -163,19 +163,19 @@
 		regulator-boot-on;
 	};
 
-	xtal24mhz: xtal24mhz@24M {
+	xtal24mhz: mclk: kmiclk: sspclk: uartclk: wdogclk: clock-24000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <24000000>;
 	};
 
-	refclk32khz: refclk32khz {
+	refclk32khz: clock-32768 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32768>;
 	};
 
-	timclk: timclk@1M {
+	timclk: clock-1000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
 		clock-div = <24>;
@@ -183,48 +183,8 @@
 		clocks = <&xtal24mhz>;
 	};
 
-	mclk: mclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	kmiclk: kmiclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	sspclk: sspclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	uartclk: uartclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	wdogclk: wdogclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
 	/* FIXME: this actually hangs off the PLL clocks */
-	pclk: pclk@0 {
+	pclk: clock-pclk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <0>;
@@ -303,114 +263,132 @@
 		pb11mp_syscon: syscon@10000000 {
 			compatible = "arm,realview-pb11mp-syscon", "syscon", "simple-mfd";
 			reg = <0x10000000 0x1000>;
+			ranges = <0x0 0x10000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 
-			led@08.0 {
+			led@8,0 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x01>;
 				label = "versatile:0";
 				linux,default-trigger = "heartbeat";
 				default-state = "on";
 			};
-			led@08.1 {
+			led@8,1 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x02>;
 				label = "versatile:1";
 				linux,default-trigger = "mmc0";
 				default-state = "off";
 			};
-			led@08.2 {
+			led@8,2 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x04>;
 				label = "versatile:2";
 				linux,default-trigger = "cpu0";
 				default-state = "off";
 			};
-			led@08.3 {
+			led@8,3 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x08>;
 				label = "versatile:3";
 				linux,default-trigger = "cpu1";
 				default-state = "off";
 			};
-			led@08.4 {
+			led@8,4 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x10>;
 				label = "versatile:4";
 				linux,default-trigger = "cpu2";
 				default-state = "off";
 			};
-			led@08.5 {
+			led@8,5 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x20>;
 				label = "versatile:5";
 				linux,default-trigger = "cpu3";
 				default-state = "off";
 			};
-			led@08.6 {
+			led@8,6 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x40>;
 				label = "versatile:6";
 				default-state = "off";
 			};
-			led@08.7 {
+			led@8,7 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x80>;
 				label = "versatile:7";
 				default-state = "off";
 			};
 
-			oscclk0: osc0@0c {
+			oscclk0: clock-controller@c {
 				compatible = "arm,syscon-icst307";
+				reg = <0x0c 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x0C>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk1: osc1@10 {
+			oscclk1: clock-controller@10 {
 				compatible = "arm,syscon-icst307";
+				reg = <0x10 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x10>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk2: osc2@14 {
+			oscclk2: clock-controller@14 {
 				compatible = "arm,syscon-icst307";
+				reg = <0x14 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x14>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk3: osc3@18 {
+			oscclk3: clock-controller@18 {
 				compatible = "arm,syscon-icst307";
+				reg = <0x18 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x18>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk4: osc4@1c {
+			oscclk4: clock-controller@1c {
 				compatible = "arm,syscon-icst307";
+				reg = <0x1c 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x1c>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk5: osc5@d4 {
+			oscclk5: clock-controller@d4 {
 				compatible = "arm,syscon-icst307";
+				reg = <0xd4 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0xd4>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk6: osc6@d8 {
+			oscclk6: clock-controller@d8 {
 				compatible = "arm,syscon-icst307";
+				reg = <0xd8 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0xd8>;
@@ -537,7 +515,7 @@
 			interrupt-parent = <&intc_pb11mp>;
 			interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&sspclk>, <&pclk>;
-			clock-names = "SSPCLK", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 		};
 
 		watchdog@1000f000 {
diff --git a/arch/arm/boot/dts/arm-realview-pba8.dts b/arch/arm/boot/dts/arm/arm-realview-pba8.dts
index d3238c252b59..d2e0082245f9 100644
--- a/arch/arm/boot/dts/arm-realview-pba8.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-pba8.dts
@@ -40,7 +40,7 @@
 		};
 	};
 
-	pmu: pmu@0 {
+	pmu: pmu {
 		compatible = "arm,cortex-a8-pmu";
 		interrupt-parent = <&intc>;
 		interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/arm-realview-pbx-a9.dts b/arch/arm/boot/dts/arm/arm-realview-pbx-a9.dts
index 85d3968fbb91..507ad7ac4974 100644
--- a/arch/arm/boot/dts/arm-realview-pbx-a9.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-pbx-a9.dts
@@ -97,7 +97,7 @@
 		interrupts = <1 14 0xf04>;
 	};
 
-	pmu: pmu@0 {
+	pmu: pmu {
 		compatible = "arm,cortex-a9-pmu";
 		interrupt-parent = <&intc>;
 		interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm/boot/dts/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm/arm-realview-pbx.dtsi
index ccf6f756b6ed..e625403a9456 100644
--- a/arch/arm/boot/dts/arm-realview-pbx.dtsi
+++ b/arch/arm/boot/dts/arm/arm-realview-pbx.dtsi
@@ -62,19 +62,19 @@
 		regulator-boot-on;
 	};
 
-	xtal24mhz: xtal24mhz@24M {
+	xtal24mhz: mclk: kmiclk: sspclk: uartclk: wdogclk: clock-24000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <24000000>;
 	};
 
-	refclk32khz: refclk32khz {
+	refclk32khz: clock-32768 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 	};
 
-	timclk: timclk@1M {
+	timclk: clock-1000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
 		clock-div = <24>;
@@ -82,48 +82,8 @@
 		clocks = <&xtal24mhz>;
 	};
 
-	mclk: mclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	kmiclk: kmiclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	sspclk: sspclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	uartclk: uartclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	wdogclk: wdogclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
 	/* FIXME: this actually hangs off the PLL clocks */
-	pclk: pclk@0 {
+	pclk: clock-pclk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <0>;
@@ -220,96 +180,112 @@
 		syscon: syscon@10000000 {
 			compatible = "arm,realview-pbx-syscon", "syscon", "simple-mfd";
 			reg = <0x10000000 0x1000>;
+			ranges = <0x0 0x10000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 
-			led@08.0 {
+			led@8,0 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x01>;
 				label = "versatile:0";
 				linux,default-trigger = "heartbeat";
 				default-state = "on";
 			};
-			led@08.1 {
+			led@8,1 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x02>;
 				label = "versatile:1";
 				linux,default-trigger = "mmc0";
 				default-state = "off";
 			};
-			led@08.2 {
+			led@8,2 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x04>;
 				label = "versatile:2";
 				linux,default-trigger = "cpu0";
 				default-state = "off";
 			};
-			led@08.3 {
+			led@8,3 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x08>;
 				label = "versatile:3";
 				default-state = "off";
 			};
-			led@08.4 {
+			led@8,4 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x10>;
 				label = "versatile:4";
 				default-state = "off";
 			};
-			led@08.5 {
+			led@8,5 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x20>;
 				label = "versatile:5";
 				default-state = "off";
 			};
-			led@08.6 {
+			led@8,6 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x40>;
 				label = "versatile:6";
 				default-state = "off";
 			};
-			led@08.7 {
+			led@8,7 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x80>;
 				label = "versatile:7";
 				default-state = "off";
 			};
-			oscclk0: osc0@0c {
+			oscclk0: clock-controller@c {
 				compatible = "arm,syscon-icst307";
+				reg = <0x0c 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x0C>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk1: osc1@10 {
+			oscclk1: clock-controller@10 {
 				compatible = "arm,syscon-icst307";
+				reg = <0x10 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x10>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk2: osc2@14 {
+			oscclk2: clock-controller@14 {
 				compatible = "arm,syscon-icst307";
+				reg = <0x14 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x14>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk3: osc3@18 {
+			oscclk3: clock-controller@18 {
 				compatible = "arm,syscon-icst307";
+				reg = <0x18 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x18>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk4: osc4@1c {
+			oscclk4: clock-controller@1c {
 				compatible = "arm,syscon-icst307";
+				reg = <0x1c 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x1c>;
@@ -374,7 +350,7 @@
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x1000d000 0x1000>;
 			clocks = <&sspclk>, <&pclk>;
-			clock-names = "SSPCLK", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 		};
 
 		wdog0: watchdog@1000f000 {
diff --git a/arch/arm/boot/dts/integrator.dtsi b/arch/arm/boot/dts/arm/integrator.dtsi
index 602f74d2c758..7f1c8ee9dd8a 100644
--- a/arch/arm/boot/dts/integrator.dtsi
+++ b/arch/arm/boot/dts/arm/integrator.dtsi
@@ -15,10 +15,14 @@
 	core-module@10000000 {
 		compatible = "arm,core-module-integrator", "syscon", "simple-mfd";
 		reg = <0x10000000 0x200>;
+		ranges = <0x0 0x10000000 0x200>;
+		#address-cells = <1>;
+		#size-cells = <1>;
 
 		/* Use core module LED to indicate CPU load */
-		led@c.0 {
+		led@c,0 {
 			compatible = "register-bit-led";
+			reg = <0x0c 0x04>;
 			offset = <0x0c>;
 			mask = <0x01>;
 			label = "integrator:core_module";
@@ -84,12 +88,12 @@
 			interrupts = <8>;
 		};
 
-		uart@16000000 {
+		serial@16000000 {
 			reg = <0x16000000 0x1000>;
 			interrupts = <1>;
 		};
 
-		uart@17000000 {
+		serial@17000000 {
 			reg = <0x17000000 0x1000>;
 			interrupts = <2>;
 		};
@@ -104,35 +108,42 @@
 			interrupts = <4>;
 		};
 
-		syscon {
+		syscon@1a000000 {
 			/* Debug registers mapped as syscon */
 			compatible = "syscon", "simple-mfd";
 			reg = <0x1a000000 0x10>;
+			ranges = <0x0 0x1a000000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 
-			led@4.0 {
+			led@4,0 {
 				compatible = "register-bit-led";
+				reg = <0x04 0x04>;
 				offset = <0x04>;
 				mask = <0x01>;
 				label = "integrator:green0";
 				linux,default-trigger = "heartbeat";
 				default-state = "on";
 			};
-			led@4.1 {
+			led@4,1 {
 				compatible = "register-bit-led";
+				reg = <0x04 0x04>;
 				offset = <0x04>;
 				mask = <0x02>;
 				label = "integrator:yellow";
 				default-state = "off";
 			};
-			led@4.2 {
+			led@4,2 {
 				compatible = "register-bit-led";
+				reg = <0x04 0x04>;
 				offset = <0x04>;
 				mask = <0x04>;
 				label = "integrator:red";
 				default-state = "off";
 			};
-			led@4.3 {
+			led@4,3 {
 				compatible = "register-bit-led";
+				reg = <0x04 0x04>;
 				offset = <0x04>;
 				mask = <0x08>;
 				label = "integrator:green1";
diff --git a/arch/arm/boot/dts/integratorap-im-pd1.dts b/arch/arm/boot/dts/arm/integratorap-im-pd1.dts
index 0614f82b808e..db13e09f2fab 100644
--- a/arch/arm/boot/dts/integratorap-im-pd1.dts
+++ b/arch/arm/boot/dts/arm/integratorap-im-pd1.dts
@@ -28,9 +28,13 @@
 	syscon@0 {
 		compatible = "arm,im-pd1-syscon", "syscon";
 		reg = <0x00000000 0x1000>;
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
 
-		vco1: vco1-clock {
+		vco1: clock-controller@0 {
 			compatible = "arm,impd1-vco1";
+			reg = <0x00 0x04>;
 			#clock-cells = <0>;
 			lock-offset = <0x08>;
 			vco-offset = <0x00>;
@@ -38,8 +42,9 @@
 			clock-output-names = "IM-PD1-VCO1";
 		};
 
-		vco2: vco2-clock {
+		vco2: clock-controller@4 {
 			compatible = "arm,impd1-vco2";
+			reg = <0x04 0x04>;
 			#clock-cells = <0>;
 			lock-offset = <0x08>;
 			vco-offset = <0x04>;
@@ -49,7 +54,7 @@
 	};
 
 	/* Also used for the Smart Card Interface SCI */
-	impd1_uartclk: clock@1_4 {
+	impd1_uartclk: clock-uart {
 		compatible = "fixed-factor-clock";
 		#clock-cells = <0>;
 		clock-div = <4>;
@@ -59,7 +64,7 @@
 	};
 
 	/* For the SSP the clock is divided by 64 */
-	impd1_sspclk: clock@1_64 {
+	impd1_sspclk: clock-ssp {
 		compatible = "fixed-factor-clock";
 		#clock-cells = <0>;
 		clock-div = <64>;
@@ -124,8 +129,6 @@
 
 	bridge {
 		compatible = "ti,ths8134b", "ti,ths8134";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		ports {
 			#address-cells = <1>;
@@ -149,6 +152,7 @@
 
 	vga {
 		compatible = "vga-connector";
+		label = "J30";
 
 		port {
 			vga_con_in: endpoint {
@@ -157,7 +161,7 @@
 		};
 	};
 
-	uart@100000 {
+	serial@100000 {
 		compatible = "arm,pl011", "arm,primecell";
 		reg = <0x00100000 0x1000>;
 		interrupts-extended = <&impd1_vic 1>;
@@ -165,7 +169,7 @@
 		clock-names = "uartclk", "apb_pclk";
 	};
 
-	uart@200000 {
+	serial@200000 {
 		compatible = "arm,pl011", "arm,primecell";
 		reg = <0x00200000 0x1000>;
 		interrupts-extended = <&impd1_vic 2>;
@@ -173,12 +177,12 @@
 		clock-names = "uartclk", "apb_pclk";
 	};
 
-	ssp@300000 {
+	spi@300000 {
 		compatible = "arm,pl022", "arm,primecell";
 		reg = <0x00300000 0x1000>;
 		interrupts-extended = <&impd1_vic 3>;
 		clocks = <&impd1_sspclk>, <&sysclk>;
-		clock-names = "spiclk", "apb_pclk";
+		clock-names = "sspclk", "apb_pclk";
 	};
 
 	impd1_gpio0: gpio@400000 {
@@ -244,6 +248,7 @@
 		/* 640x480 16bpp @ 25.175MHz is 36827428 bytes/s */
 		max-memory-bandwidth = <40000000>;
 		memory-region = <&impd1_ram>;
+		dma-ranges;
 
 		port@0 {
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/arm/integratorap.dts
index 67d1f9b24a52..9b6a1dbaf265 100644
--- a/arch/arm/boot/dts/integratorap.dts
+++ b/arch/arm/boot/dts/arm/integratorap.dts
@@ -57,22 +57,14 @@
 	};
 
 	/* 24 MHz chrystal on the Integrator/AP development board */
-	xtal24mhz: xtal24mhz@24M {
+	xtal24mhz: pclk: clock-24000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <24000000>;
 	};
 
-	pclk: pclk@0 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
 	/* The UART clock is 14.74 MHz divided by an ICS525 */
-	uartclk: uartclk@14.74M {
+	uartclk: clock-14745600 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <14745600>;
@@ -81,15 +73,16 @@
 
 	core-module@10000000 {
 		/* 24 MHz chrystal on the core module */
-		cm24mhz: cm24mhz@24M {
+		cm24mhz: clock-24000000 {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <24000000>;
 		};
 
 		/* Oscillator on the core module, clocks the CPU core */
-		cmosc: cmosc@24M {
+		cmosc: clock-controller@8 {
 			compatible = "arm,syscon-icst525-integratorap-cm";
+			reg = <0x08 0x04>;
 			#clock-cells = <0>;
 			lock-offset = <0x14>;
 			vco-offset = <0x08>;
@@ -97,8 +90,9 @@
 		};
 
 		/* Auxilary oscillator on the core module, 32.369MHz at boot */
-		auxosc: auxosc@24M {
+		auxosc: clock-controller@1c {
 			compatible = "arm,syscon-icst525";
+			reg = <0x1c 0x04>;
 			#clock-cells = <0>;
 			lock-offset = <0x14>;
 			vco-offset = <0x1c>;
@@ -109,13 +103,17 @@
 	syscon {
 		compatible = "arm,integrator-ap-syscon", "syscon";
 		reg = <0x11000000 0x100>;
+		ranges = <0x0 0x11000000 0x100>;
+		#size-cells = <1>;
+		#address-cells = <1>;
 
 		/*
 		 * SYSCLK clocks PCIv3 bridge, system controller and the
 		 * logic modules.
 		 */
-		sysclk: apsys@24M {
+		sysclk: clock-controller@4 {
 			compatible = "arm,syscon-icst525-integratorap-sys";
+			reg = <0x04 0x04>;
 			#clock-cells = <0>;
 			lock-offset = <0x1c>;
 			vco-offset = <0x04>;
@@ -123,8 +121,9 @@
 		};
 
 		/* One-bit control for the PCI bus clock (33 or 25 MHz) */
-		pciclk: pciclk@24M {
+		pciclk: clock-controller@4,8 {
 			compatible = "arm,syscon-icst525-integratorap-pci";
+			reg = <0x04 0x04>;
 			#clock-cells = <0>;
 			lock-offset = <0x1c>;
 			vco-offset = <0x04>;
@@ -151,8 +150,9 @@
 		valid-mask = <0x003fffff>;
 	};
 
-	pci: pciv3@62000000 {
+	pci: pci@62000000 {
 		compatible = "arm,integrator-ap-pci", "v3,v360epc-pci";
+		device_type = "pci";
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
@@ -210,14 +210,14 @@
 			clock-names = "apb_pclk";
 		};
 
-		uart0: uart@16000000 {
+		uart0: serial@16000000 {
 			compatible = "arm,pl010", "arm,primecell";
 			arm,primecell-periphid = <0x00041010>;
 			clocks = <&uartclk>, <&pclk>;
 			clock-names = "uartclk", "apb_pclk";
 		};
 
-		uart1: uart@17000000 {
+		uart1: serial@17000000 {
 			compatible = "arm,pl010", "arm,primecell";
 			arm,primecell-periphid = <0x00041010>;
 			clocks = <&uartclk>, <&pclk>;
@@ -254,7 +254,7 @@
 		lm0: bus@c0000000 {
 			compatible = "simple-bus";
 			ranges = <0x00000000 0xc0000000 0x10000000>;
-			dma-ranges = <0x00000000 0x80000000 0x10000000>;
+			dma-ranges = <0x00000000 0xc0000000 0x10000000>;
 			reg = <0xc0000000 0x10000000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -262,7 +262,7 @@
 		lm1: bus@d0000000 {
 			compatible = "simple-bus";
 			ranges = <0x00000000 0xd0000000 0x10000000>;
-			dma-ranges = <0x00000000 0x80000000 0x10000000>;
+			dma-ranges = <0x00000000 0xd0000000 0x10000000>;
 			reg = <0xd0000000 0x10000000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -270,7 +270,7 @@
 		lm2: bus@e0000000 {
 			compatible = "simple-bus";
 			ranges = <0x00000000 0xe0000000 0x10000000>;
-			dma-ranges = <0x00000000 0x80000000 0x10000000>;
+			dma-ranges = <0x00000000 0xe0000000 0x10000000>;
 			reg = <0xe0000000 0x10000000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -278,7 +278,7 @@
 		lm3: bus@f0000000 {
 			compatible = "simple-bus";
 			ranges = <0x00000000 0xf0000000 0x10000000>;
-			dma-ranges = <0x00000000 0x80000000 0x10000000>;
+			dma-ranges = <0x00000000 0xf0000000 0x10000000>;
 			reg = <0xf0000000 0x10000000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/arm/integratorcp.dts
index 01fa229e1bd0..8ad1a8957ace 100644
--- a/arch/arm/boot/dts/integratorcp.dts
+++ b/arch/arm/boot/dts/arm/integratorcp.dts
@@ -47,14 +47,14 @@
 	 */
 
 	/* The codec chrystal operates at 24.576 MHz */
-	xtal_codec: xtal24.576@24.576M {
+	xtal_codec: clock-24576000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <24576000>;
 	};
 
 	/* The chrystal is divided by 2 by the codec for the AACI bit clock */
-	aaci_bitclk: aaci_bitclk@12.288M {
+	aaci_bitclk: clock-12288000 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
 		clock-div = <2>;
@@ -63,21 +63,21 @@
 	};
 
 	/* This is a 25MHz chrystal on the base board */
-	xtal25mhz: xtal25mhz@25M {
+	xtal25mhz: clock-25000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <25000000>;
 	};
 
 	/* The UART clock is 14.74 MHz divided from 25MHz by an ICS525 */
-	uartclk: uartclk@14.74M {
+	uartclk: clock-14745600 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <14745600>;
 	};
 
 	/* Actually sysclk I think */
-	pclk: pclk@0 {
+	pclk: clock-pclk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <0>;
@@ -85,15 +85,16 @@
 
 	core-module@10000000 {
 		/* 24 MHz chrystal on the core module */
-		cm24mhz: cm24mhz@24M {
+		cm24mhz: clock-24000000 {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <24000000>;
 		};
 
 		/* Oscillator on the core module, clocks the CPU core */
-		cmcore: cmosc@24M {
+		cmcore: clock-controller@8 {
 			compatible = "arm,syscon-icst525-integratorcp-cm-core";
+			reg = <0x08 0x04>;
 			#clock-cells = <0>;
 			lock-offset = <0x14>;
 			vco-offset = <0x08>;
@@ -101,8 +102,9 @@
 		};
 
 		/* Oscillator on the core module, clocks the memory bus */
-		cmmem: cmosc@24M {
+		cmmem: clock-controller@8,12 {
 			compatible = "arm,syscon-icst525-integratorcp-cm-mem";
+			reg = <0x08 0x04>;
 			#clock-cells = <0>;
 			lock-offset = <0x14>;
 			vco-offset = <0x08>;
@@ -110,8 +112,9 @@
 		};
 
 		/* Auxilary oscillator on the core module, clocks the CLCD */
-		auxosc: auxosc@24M {
+		auxosc: clock-controller@1c {
 			compatible = "arm,syscon-icst525";
+			reg = <0x1c 0x04>;
 			#clock-cells = <0>;
 			lock-offset = <0x14>;
 			vco-offset = <0x1c>;
@@ -128,7 +131,7 @@
 		};
 
 		/* The timer clock is the 24 MHz oscillator divided to 1MHz */
-		timclk: timclk@1M {
+		timclk: clock-1000000 {
 			#clock-cells = <0>;
 			compatible = "fixed-factor-clock";
 			clock-div = <24>;
@@ -241,13 +244,13 @@
 			clock-names = "apb_pclk";
 		};
 
-		uart@16000000 {
+		serial@16000000 {
 			compatible = "arm,pl011", "arm,primecell";
 			clocks = <&uartclk>, <&pclk>;
 			clock-names = "uartclk", "apb_pclk";
 		};
 
-		uart@17000000 {
+		serial@17000000 {
 			compatible = "arm,pl011", "arm,primecell";
 			clocks = <&uartclk>, <&pclk>;
 			clock-names = "uartclk", "apb_pclk";
diff --git a/arch/arm/boot/dts/mps2-an385.dts b/arch/arm/boot/dts/arm/mps2-an385.dts
index aebbebfc25d1..aebbebfc25d1 100644
--- a/arch/arm/boot/dts/mps2-an385.dts
+++ b/arch/arm/boot/dts/arm/mps2-an385.dts
diff --git a/arch/arm/boot/dts/mps2-an399.dts b/arch/arm/boot/dts/arm/mps2-an399.dts
index 349abf70b2a5..349abf70b2a5 100644
--- a/arch/arm/boot/dts/mps2-an399.dts
+++ b/arch/arm/boot/dts/arm/mps2-an399.dts
diff --git a/arch/arm/boot/dts/mps2.dtsi b/arch/arm/boot/dts/arm/mps2.dtsi
index 37f5023f529c..e240bc8aa605 100644
--- a/arch/arm/boot/dts/mps2.dtsi
+++ b/arch/arm/boot/dts/arm/mps2.dtsi
@@ -42,43 +42,43 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include "armv7-m.dtsi"
+#include "../armv7-m.dtsi"
 
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
 
-	oscclk0: clk-osc0 {
+	oscclk0: clock-50000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
 	};
 
-	oscclk1: clk-osc1 {
+	oscclk1: clock-24576000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <24576000>;
 	};
 
-	oscclk2: clk-osc2 {
+	oscclk2: clock-25000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <25000000>;
 	};
 
-	cfgclk: clk-cfg {
+	cfgclk: clock-5000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <5000000>;
 	};
 
-	spicfgclk: clk-spicfg {
+	spicfgclk: clock-75000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <75000000>;
 	};
 
-	sysclk: clk-sys {
+	sysclk: spiclcd: spicon: i2cclcd: i2caud: clock-sys {
 		compatible = "fixed-factor-clock";
 		clocks = <&oscclk0>;
 		#clock-cells = <0>;
@@ -86,7 +86,7 @@
 		clock-mult = <1>;
 	};
 
-	audmclk: clk-audm {
+	audmclk: clk-12388000 {
 		compatible = "fixed-factor-clock";
 		clocks = <&oscclk1>;
 		#clock-cells = <0>;
@@ -94,7 +94,7 @@
 		clock-mult = <1>;
 	};
 
-	audsclk: clk-auds {
+	audsclk: clk-3072000 {
 		compatible = "fixed-factor-clock";
 		clocks = <&oscclk1>;
 		#clock-cells = <0>;
@@ -102,38 +102,6 @@
 		clock-mult = <1>;
 	};
 
-	spiclcd: clk-cpiclcd {
-		compatible = "fixed-factor-clock";
-		clocks = <&oscclk0>;
-		#clock-cells = <0>;
-		clock-div = <2>;
-		clock-mult = <1>;
-	};
-
-	spicon: clk-spicon {
-		compatible = "fixed-factor-clock";
-		clocks = <&oscclk0>;
-		#clock-cells = <0>;
-		clock-div = <2>;
-		clock-mult = <1>;
-	};
-
-	i2cclcd: clk-i2cclcd {
-		compatible = "fixed-factor-clock";
-		clocks = <&oscclk0>;
-		#clock-cells = <0>;
-		clock-div = <2>;
-		clock-mult = <1>;
-	};
-
-	i2caud: clk-i2caud {
-		compatible = "fixed-factor-clock";
-		clocks = <&oscclk0>;
-		#clock-cells = <0>;
-		clock-div = <2>;
-		clock-mult = <1>;
-	};
-
 	soc {
 		compatible = "simple-bus";
 		ranges;
@@ -216,8 +184,13 @@
 			compatible = "syscon", "simple-mfd";
 			reg = <0x8000 0x10>;
 
-			led0 {
+			ranges = <0x0 0x8000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			led@0,0 {
 				compatible = "register-bit-led";
+				reg = <0x00 0x04>;
 				offset = <0x0>;
 				mask = <0x01>;
 				label = "userled:0";
@@ -225,8 +198,9 @@
 				default-state = "on";
 			};
 
-			led1 {
+			led@0,1 {
 				compatible = "register-bit-led";
+				reg = <0x00 0x04>;
 				offset = <0x0>;
 				mask = <0x02>;
 				label = "userled:1";
diff --git a/arch/arm/boot/dts/versatile-ab-ib2.dts b/arch/arm/boot/dts/arm/versatile-ab-ib2.dts
index c577ff4bb4be..7ebb0dfd0467 100644
--- a/arch/arm/boot/dts/versatile-ab-ib2.dts
+++ b/arch/arm/boot/dts/arm/versatile-ab-ib2.dts
@@ -13,9 +13,13 @@
 	syscon@27000000 {
 		compatible = "arm,versatile-ib2-syscon", "syscon", "simple-mfd";
 		reg = <0x27000000 0x4>;
+		ranges = <0x0 0x27000000 0x4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
 
-		led@00.4 {
+		led@0,4 {
 			compatible = "register-bit-led";
+			reg = <0x00 0x04>;
 			offset = <0x00>;
 			mask = <0x10>;
 			label = "versatile-ib2:0";
diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/arm/versatile-ab.dts
index 151c0220047d..635ab9268899 100644
--- a/arch/arm/boot/dts/versatile-ab.dts
+++ b/arch/arm/boot/dts/arm/versatile-ab.dts
@@ -24,7 +24,7 @@
 		reg = <0x0 0x08000000>;
 	};
 
-	xtal24mhz: xtal24mhz@24M {
+	xtal24mhz: clock-24000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <24000000>;
@@ -32,8 +32,6 @@
 
 	bridge {
 		compatible = "ti,ths8134b", "ti,ths8134";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		ports {
 			#address-cells = <1>;
@@ -59,6 +57,7 @@
 
 	vga {
 		compatible = "vga-connector";
+		label = "J1";
 
 		port {
 			vga_con_in: endpoint {
@@ -70,61 +69,72 @@
 	core-module@10000000 {
 		compatible = "arm,core-module-versatile", "syscon", "simple-mfd";
 		reg = <0x10000000 0x200>;
+		ranges = <0x0 0x10000000 0x200>;
+		#address-cells = <1>;
+		#size-cells = <1>;
 
-		led@08.0 {
+		led@8,0 {
 			compatible = "register-bit-led";
+			reg = <0x08 0x04>;
 			offset = <0x08>;
 			mask = <0x01>;
 			label = "versatile:0";
 			linux,default-trigger = "heartbeat";
 			default-state = "on";
 		};
-		led@08.1 {
+		led@8,1 {
 			compatible = "register-bit-led";
+			reg = <0x08 0x04>;
 			offset = <0x08>;
 			mask = <0x02>;
 			label = "versatile:1";
 			linux,default-trigger = "mmc0";
 			default-state = "off";
 		};
-		led@08.2 {
+		led@8,2 {
 			compatible = "register-bit-led";
+			reg = <0x08 0x04>;
 			offset = <0x08>;
 			mask = <0x04>;
 			label = "versatile:2";
 			linux,default-trigger = "cpu0";
 			default-state = "off";
 		};
-		led@08.3 {
+		led@8,3 {
 			compatible = "register-bit-led";
+			reg = <0x08 0x04>;
 			offset = <0x08>;
 			mask = <0x08>;
 			label = "versatile:3";
 			default-state = "off";
 		};
-		led@08.4 {
+		led@8,4 {
 			compatible = "register-bit-led";
+			reg = <0x08 0x04>;
 			offset = <0x08>;
 			mask = <0x10>;
 			label = "versatile:4";
 			default-state = "off";
 		};
-		led@08.5 {
+		led@8,5 {
 			compatible = "register-bit-led";
+			reg = <0x08 0x04>;
 			offset = <0x08>;
 			mask = <0x20>;
 			label = "versatile:5";
 			default-state = "off";
 		};
-		led@08.6 {
+		led@8,6 {
 			compatible = "register-bit-led";
+			reg = <0x08 0x04>;
 			offset = <0x08>;
 			mask = <0x40>;
 			label = "versatile:6";
 			default-state = "off";
 		};
-		led@08.7 {
+		led@8,7 {
 			compatible = "register-bit-led";
+			reg = <0x08 0x04>;
 			offset = <0x08>;
 			mask = <0x80>;
 			label = "versatile:7";
@@ -132,14 +142,14 @@
 		};
 
 		/* OSC1 on AB, OSC4 on PB */
-		osc1: cm_aux_osc@24M {
+		osc1: clock-osc {
 			#clock-cells = <0>;
 			compatible = "arm,versatile-cm-auxosc";
 			clocks = <&xtal24mhz>;
 		};
 
 		/* The timer clock is the 24 MHz oscillator divided to 1MHz */
-		timclk: timclk@1M {
+		timclk: clock-1000000 {
 			#clock-cells = <0>;
 			compatible = "fixed-factor-clock";
 			clock-div = <24>;
@@ -147,7 +157,7 @@
 			clocks = <&xtal24mhz>;
 		};
 
-		pclk: pclk@24M {
+		pclk: clock-pclk {
 			#clock-cells = <0>;
 			compatible = "fixed-factor-clock";
 			clock-div = <1>;
@@ -226,7 +236,7 @@
 			clock-names = "apb_pclk";
 		};
 
-		uart0: uart@101f1000 {
+		uart0: serial@101f1000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x101f1000 0x1000>;
 			interrupts = <12>;
@@ -234,7 +244,7 @@
 			clock-names = "uartclk", "apb_pclk";
 		};
 
-		uart1: uart@101f2000 {
+		uart1: serial@101f2000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x101f2000 0x1000>;
 			interrupts = <13>;
@@ -242,7 +252,7 @@
 			clock-names = "uartclk", "apb_pclk";
 		};
 
-		uart2: uart@101f3000 {
+		uart2: serial@101f3000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x101f3000 0x1000>;
 			interrupts = <14>;
@@ -380,7 +390,7 @@
 			reg = <0x101f4000 0x1000>;
 			interrupts = <11>;
 			clocks = <&xtal24mhz>, <&pclk>;
-			clock-names = "SSPCLK", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 		};
 
 		fpga {
diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/arm/versatile-pb.dts
index e7e751a858d8..fc21ce54b33a 100644
--- a/arch/arm/boot/dts/versatile-pb.dts
+++ b/arch/arm/boot/dts/arm/versatile-pb.dts
@@ -85,7 +85,7 @@
 				 */
 				interrupts-extended = <&sic 22 &sic 23>;
 			};
-			uart@9000 {
+			serial@9000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x9000 0x1000>;
 				interrupt-parent = <&sic>;
diff --git a/arch/arm/boot/dts/arm/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/arm/vexpress-v2m-rs1.dtsi
new file mode 100644
index 000000000000..158b3923eae3
--- /dev/null
+++ b/arch/arm/boot/dts/arm/vexpress-v2m-rs1.dtsi
@@ -0,0 +1,494 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * Motherboard Express uATX
+ * V2M-P1
+ *
+ * HBI-0190D
+ *
+ * RS1 memory map ("ARM Cortex-A Series memory map" in the board's
+ * Technical Reference Manual)
+ *
+ * WARNING! The hardware described in this file is independent from the
+ * original variant (vexpress-v2m.dtsi), but there is a strong
+ * correspondence between the two configurations.
+ *
+ * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
+ * CHANGES TO vexpress-v2m.dtsi!
+ */
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	v2m_fixed_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	v2m_clk24mhz: clock-24000000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "v2m:clk24mhz";
+	};
+
+	v2m_refclk1mhz: clock-1000000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1000000>;
+		clock-output-names = "v2m:refclk1mhz";
+	};
+
+	v2m_refclk32khz: clock-32768 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "v2m:refclk32khz";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-1 {
+			label = "v2m:green:user1";
+			gpios = <&v2m_led_gpios 0 0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-2 {
+			label = "v2m:green:user2";
+			gpios = <&v2m_led_gpios 1 0>;
+			linux,default-trigger = "disk-activity";
+		};
+
+		led-3 {
+			label = "v2m:green:user3";
+			gpios = <&v2m_led_gpios 2 0>;
+			linux,default-trigger = "cpu0";
+		};
+
+		led-4 {
+			label = "v2m:green:user4";
+			gpios = <&v2m_led_gpios 3 0>;
+			linux,default-trigger = "cpu1";
+		};
+
+		led-5 {
+			label = "v2m:green:user5";
+			gpios = <&v2m_led_gpios 4 0>;
+			linux,default-trigger = "cpu2";
+		};
+
+		led-6 {
+			label = "v2m:green:user6";
+			gpios = <&v2m_led_gpios 5 0>;
+			linux,default-trigger = "cpu3";
+		};
+
+		led-7 {
+			label = "v2m:green:user7";
+			gpios = <&v2m_led_gpios 6 0>;
+			linux,default-trigger = "cpu4";
+		};
+
+		led-8 {
+			label = "v2m:green:user8";
+			gpios = <&v2m_led_gpios 7 0>;
+			linux,default-trigger = "cpu5";
+		};
+	};
+
+	bus@8000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 63>;
+		interrupt-map = <0  0 &gic GIC_SPI  0 IRQ_TYPE_LEVEL_HIGH>,
+				<0  1 &gic GIC_SPI  1 IRQ_TYPE_LEVEL_HIGH>,
+				<0  2 &gic GIC_SPI  2 IRQ_TYPE_LEVEL_HIGH>,
+				<0  3 &gic GIC_SPI  3 IRQ_TYPE_LEVEL_HIGH>,
+				<0  4 &gic GIC_SPI  4 IRQ_TYPE_LEVEL_HIGH>,
+				<0  5 &gic GIC_SPI  5 IRQ_TYPE_LEVEL_HIGH>,
+				<0  6 &gic GIC_SPI  6 IRQ_TYPE_LEVEL_HIGH>,
+				<0  7 &gic GIC_SPI  7 IRQ_TYPE_LEVEL_HIGH>,
+				<0  8 &gic GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
+				<0  9 &gic GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+				<0 10 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				<0 11 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				<0 12 &gic GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				<0 13 &gic GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				<0 14 &gic GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				<0 15 &gic GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				<0 16 &gic GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				<0 17 &gic GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				<0 18 &gic GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				<0 19 &gic GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				<0 20 &gic GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				<0 21 &gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				<0 22 &gic GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				<0 23 &gic GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+				<0 24 &gic GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				<0 25 &gic GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				<0 26 &gic GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				<0 27 &gic GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				<0 28 &gic GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+				<0 29 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				<0 30 &gic GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				<0 31 &gic GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				<0 32 &gic GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				<0 33 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+				<0 34 &gic GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				<0 35 &gic GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+				<0 36 &gic GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				<0 37 &gic GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				<0 38 &gic GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				<0 39 &gic GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				<0 40 &gic GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				<0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				<0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+
+		motherboard-bus@8000000 {
+			arm,hbi = <0x190>;
+			arm,vexpress,site = <0>;
+			compatible = "arm,vexpress,v2m-p1", "simple-bus";
+			#address-cells = <2>; /* SMB chipselect number and offset */
+			#size-cells = <1>;
+			ranges = <0 0 0x08000000 0x04000000>,
+				 <1 0 0x14000000 0x04000000>,
+				 <2 0 0x18000000 0x04000000>,
+				 <3 0 0x1c000000 0x04000000>,
+				 <4 0 0x0c000000 0x04000000>,
+				 <5 0 0x10000000 0x04000000>;
+
+			nor_flash: flash@0 {
+				compatible = "arm,vexpress-flash", "cfi-flash";
+				reg = <0 0x00000000 0x04000000>,
+				      <4 0x00000000 0x04000000>;
+				bank-width = <4>;
+				partitions {
+					compatible = "arm,arm-firmware-suite";
+				};
+			};
+
+			psram@100000000 {
+				compatible = "arm,vexpress-psram", "mtd-ram";
+				reg = <1 0x00000000 0x02000000>;
+				bank-width = <4>;
+			};
+
+			ethernet@202000000 {
+				compatible = "smsc,lan9118", "smsc,lan9115";
+				reg = <2 0x02000000 0x10000>;
+				interrupts = <15>;
+				phy-mode = "mii";
+				reg-io-width = <4>;
+				smsc,irq-active-high;
+				smsc,irq-push-pull;
+				vdd33a-supply = <&v2m_fixed_3v3>;
+				vddvario-supply = <&v2m_fixed_3v3>;
+			};
+
+			usb@203000000 {
+				compatible = "nxp,usb-isp1761";
+				reg = <2 0x03000000 0x20000>;
+				interrupts = <16>;
+				dr_mode = "peripheral";
+			};
+
+			iofpga-bus@300000000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 3 0 0x200000>;
+
+				v2m_sysreg: sysreg@10000 {
+					compatible = "arm,vexpress-sysreg";
+					reg = <0x010000 0x1000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x10000 0x1000>;
+
+					v2m_led_gpios: gpio@8 {
+						compatible = "arm,vexpress-sysreg,sys_led";
+						reg = <0x008 4>;
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+
+					v2m_mmc_gpios: gpio@48 {
+						compatible = "arm,vexpress-sysreg,sys_mci";
+						reg = <0x048 4>;
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+
+					v2m_flash_gpios: gpio@4c {
+						compatible = "arm,vexpress-sysreg,sys_flash";
+						reg = <0x04c 4>;
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+				};
+
+				v2m_sysctl: sysctl@20000 {
+					compatible = "arm,sp810", "arm,primecell";
+					reg = <0x020000 0x1000>;
+					clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
+					clock-names = "refclk", "timclk", "apb_pclk";
+					#clock-cells = <1>;
+					clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+					assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+					assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
+				};
+
+				/* PCI-E I2C bus */
+				v2m_i2c_pcie: i2c@30000 {
+					compatible = "arm,versatile-i2c";
+					reg = <0x030000 0x1000>;
+
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pcie-switch@60 {
+						compatible = "idt,89hpes32h8";
+						reg = <0x60>;
+					};
+				};
+
+				aaci@40000 {
+					compatible = "arm,pl041", "arm,primecell";
+					reg = <0x040000 0x1000>;
+					interrupts = <11>;
+					clocks = <&smbclk>;
+					clock-names = "apb_pclk";
+				};
+
+				mmc@50000 {
+					compatible = "arm,pl180", "arm,primecell";
+					reg = <0x050000 0x1000>;
+					interrupts = <9>, <10>;
+					cd-gpios = <&v2m_mmc_gpios 0 0>;
+					wp-gpios = <&v2m_mmc_gpios 1 0>;
+					max-frequency = <12000000>;
+					vmmc-supply = <&v2m_fixed_3v3>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "mclk", "apb_pclk";
+				};
+
+				kmi@60000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x060000 0x1000>;
+					interrupts = <12>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
+
+				kmi@70000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x070000 0x1000>;
+					interrupts = <13>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
+
+				v2m_serial0: serial@90000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x090000 0x1000>;
+					interrupts = <5>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial1: serial@a0000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0a0000 0x1000>;
+					interrupts = <6>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial2: serial@b0000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0b0000 0x1000>;
+					interrupts = <7>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial3: serial@c0000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0c0000 0x1000>;
+					interrupts = <8>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				watchdog@f0000 {
+					compatible = "arm,sp805", "arm,primecell";
+					reg = <0x0f0000 0x1000>;
+					interrupts = <0>;
+					clocks = <&v2m_refclk32khz>, <&smbclk>;
+					clock-names = "wdog_clk", "apb_pclk";
+				};
+
+				v2m_timer01: timer@110000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x110000 0x1000>;
+					interrupts = <2>;
+					clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
+				};
+
+				v2m_timer23: timer@120000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x120000 0x1000>;
+					interrupts = <3>;
+					clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
+				};
+
+				/* DVI I2C bus */
+				v2m_i2c_dvi: i2c@160000 {
+					compatible = "arm,versatile-i2c";
+					reg = <0x160000 0x1000>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					dvi-transmitter@39 {
+						compatible = "sil,sii9022-tpi", "sil,sii9022";
+						reg = <0x39>;
+
+						ports {
+							#address-cells = <1>;
+							#size-cells = <0>;
+
+							port@0 {
+								reg = <0>;
+								dvi_bridge_in: endpoint {
+									remote-endpoint = <&clcd_pads>;
+								};
+							};
+						};
+					};
+
+					dvi-transmitter@60 {
+						compatible = "sil,sii9022-cpi", "sil,sii9022";
+						reg = <0x60>;
+					};
+				};
+
+				rtc@170000 {
+					compatible = "arm,pl031", "arm,primecell";
+					reg = <0x170000 0x1000>;
+					interrupts = <4>;
+					clocks = <&smbclk>;
+					clock-names = "apb_pclk";
+				};
+
+				compact-flash@1a0000 {
+					compatible = "arm,vexpress-cf", "ata-generic";
+					reg = <0x1a0000 0x100
+					       0x1a0100 0xf00>;
+					reg-shift = <2>;
+				};
+
+				clcd@1f0000 {
+					compatible = "arm,pl111", "arm,primecell";
+					reg = <0x1f0000 0x1000>;
+					interrupt-names = "combined";
+					interrupts = <14>;
+					clocks = <&v2m_oscclk1>, <&smbclk>;
+					clock-names = "clcdclk", "apb_pclk";
+					/* 800x600 16bpp @36MHz works fine */
+					max-memory-bandwidth = <54000000>;
+					memory-region = <&vram>;
+
+					port {
+						clcd_pads: endpoint {
+							remote-endpoint = <&dvi_bridge_in>;
+							arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+						};
+					};
+				};
+
+				mcc {
+					compatible = "arm,vexpress,config-bus";
+					arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+					oscclk0 {
+						/* MCC static memory clock */
+						compatible = "arm,vexpress-osc";
+						arm,vexpress-sysreg,func = <1 0>;
+						freq-range = <25000000 60000000>;
+						#clock-cells = <0>;
+						clock-output-names = "v2m:oscclk0";
+					};
+
+					v2m_oscclk1: oscclk1 {
+						/* CLCD clock */
+						compatible = "arm,vexpress-osc";
+						arm,vexpress-sysreg,func = <1 1>;
+						freq-range = <23750000 65000000>;
+						#clock-cells = <0>;
+						clock-output-names = "v2m:oscclk1";
+					};
+
+					v2m_oscclk2: oscclk2 {
+						/* IO FPGA peripheral clock */
+						compatible = "arm,vexpress-osc";
+						arm,vexpress-sysreg,func = <1 2>;
+						freq-range = <24000000 24000000>;
+						#clock-cells = <0>;
+						clock-output-names = "v2m:oscclk2";
+					};
+
+					volt-vio {
+						/* Logic level voltage */
+						compatible = "arm,vexpress-volt";
+						arm,vexpress-sysreg,func = <2 0>;
+						regulator-name = "VIO";
+						regulator-always-on;
+						label = "VIO";
+					};
+
+					temp-mcc {
+						/* MCC internal operating temperature */
+						compatible = "arm,vexpress-temp";
+						arm,vexpress-sysreg,func = <4 0>;
+						label = "MCC";
+					};
+
+					reset {
+						compatible = "arm,vexpress-reset";
+						arm,vexpress-sysreg,func = <5 0>;
+					};
+
+					muxfpga {
+						compatible = "arm,vexpress-muxfpga";
+						arm,vexpress-sysreg,func = <7 0>;
+					};
+
+					shutdown {
+						compatible = "arm,vexpress-shutdown";
+						arm,vexpress-sysreg,func = <8 0>;
+					};
+
+					reboot {
+						compatible = "arm,vexpress-reboot";
+						arm,vexpress-sysreg,func = <9 0>;
+					};
+
+					dvimode {
+						compatible = "arm,vexpress-dvimode";
+						arm,vexpress-sysreg,func = <11 0>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/arm/vexpress-v2m.dtsi
index f434fe5cf4a1..be03f2a8a57a 100644
--- a/arch/arm/boot/dts/vexpress-v2m.dtsi
+++ b/arch/arm/boot/dts/arm/vexpress-v2m.dtsi
@@ -216,7 +216,7 @@
 					clock-names = "KMIREFCLK", "apb_pclk";
 				};
 
-				v2m_serial0: uart@9000 {
+				v2m_serial0: serial@9000 {
 					compatible = "arm,pl011", "arm,primecell";
 					reg = <0x09000 0x1000>;
 					interrupts = <5>;
@@ -224,7 +224,7 @@
 					clock-names = "uartclk", "apb_pclk";
 				};
 
-				v2m_serial1: uart@a000 {
+				v2m_serial1: serial@a000 {
 					compatible = "arm,pl011", "arm,primecell";
 					reg = <0x0a000 0x1000>;
 					interrupts = <6>;
@@ -232,7 +232,7 @@
 					clock-names = "uartclk", "apb_pclk";
 				};
 
-				v2m_serial2: uart@b000 {
+				v2m_serial2: serial@b000 {
 					compatible = "arm,pl011", "arm,primecell";
 					reg = <0x0b000 0x1000>;
 					interrupts = <7>;
@@ -240,7 +240,7 @@
 					clock-names = "uartclk", "apb_pclk";
 				};
 
-				v2m_serial3: uart@c000 {
+				v2m_serial3: serial@c000 {
 					compatible = "arm,pl011", "arm,primecell";
 					reg = <0x0c000 0x1000>;
 					interrupts = <8>;
@@ -351,7 +351,7 @@
 				};
 			};
 
-			v2m_fixed_3v3: fixed-regulator-0 {
+			v2m_fixed_3v3: regulator-3v3 {
 				compatible = "regulator-fixed";
 				regulator-name = "3V3";
 				regulator-min-microvolt = <3300000>;
@@ -359,21 +359,21 @@
 				regulator-always-on;
 			};
 
-			v2m_clk24mhz: clk24mhz {
+			v2m_clk24mhz: clock-24000000 {
 				compatible = "fixed-clock";
 				#clock-cells = <0>;
 				clock-frequency = <24000000>;
 				clock-output-names = "v2m:clk24mhz";
 			};
 
-			v2m_refclk1mhz: refclk1mhz {
+			v2m_refclk1mhz: clock-1000000 {
 				compatible = "fixed-clock";
 				#clock-cells = <0>;
 				clock-frequency = <1000000>;
 				clock-output-names = "v2m:refclk1mhz";
 			};
 
-			v2m_refclk32khz: refclk32khz {
+			v2m_refclk32khz: clock-32768 {
 				compatible = "fixed-clock";
 				#clock-cells = <0>;
 				clock-frequency = <32768>;
@@ -383,49 +383,49 @@
 			leds {
 				compatible = "gpio-leds";
 
-				user1 {
+				led-user1 {
 					label = "v2m:green:user1";
 					gpios = <&v2m_led_gpios 0 0>;
 					linux,default-trigger = "heartbeat";
 				};
 
-				user2 {
+				led-user2 {
 					label = "v2m:green:user2";
 					gpios = <&v2m_led_gpios 1 0>;
 					linux,default-trigger = "mmc0";
 				};
 
-				user3 {
+				led-user3 {
 					label = "v2m:green:user3";
 					gpios = <&v2m_led_gpios 2 0>;
 					linux,default-trigger = "cpu0";
 				};
 
-				user4 {
+				led-user4 {
 					label = "v2m:green:user4";
 					gpios = <&v2m_led_gpios 3 0>;
 					linux,default-trigger = "cpu1";
 				};
 
-				user5 {
+				led-user5 {
 					label = "v2m:green:user5";
 					gpios = <&v2m_led_gpios 4 0>;
 					linux,default-trigger = "cpu2";
 				};
 
-				user6 {
+				led-user6 {
 					label = "v2m:green:user6";
 					gpios = <&v2m_led_gpios 5 0>;
 					linux,default-trigger = "cpu3";
 				};
 
-				user7 {
+				led-user7 {
 					label = "v2m:green:user7";
 					gpios = <&v2m_led_gpios 6 0>;
 					linux,default-trigger = "cpu4";
 				};
 
-				user8 {
+				led-user8 {
 					label = "v2m:green:user8";
 					gpios = <&v2m_led_gpios 7 0>;
 					linux,default-trigger = "cpu5";
@@ -436,7 +436,7 @@
 				compatible = "arm,vexpress,config-bus";
 				arm,vexpress,config-bridge = <&v2m_sysreg>;
 
-				oscclk0 {
+				clock-controller-0 {
 					/* MCC static memory clock */
 					compatible = "arm,vexpress-osc";
 					arm,vexpress-sysreg,func = <1 0>;
@@ -445,7 +445,7 @@
 					clock-output-names = "v2m:oscclk0";
 				};
 
-				v2m_oscclk1: oscclk1 {
+				v2m_oscclk1: clock-controller-1 {
 					/* CLCD clock */
 					compatible = "arm,vexpress-osc";
 					arm,vexpress-sysreg,func = <1 1>;
@@ -454,7 +454,7 @@
 					clock-output-names = "v2m:oscclk1";
 				};
 
-				v2m_oscclk2: oscclk2 {
+				v2m_oscclk2: clock-controller-2 {
 					/* IO FPGA peripheral clock */
 					compatible = "arm,vexpress-osc";
 					arm,vexpress-sysreg,func = <1 2>;
@@ -463,7 +463,7 @@
 					clock-output-names = "v2m:oscclk2";
 				};
 
-				volt-vio {
+				regulator-vio {
 					/* Logic level voltage */
 					compatible = "arm,vexpress-volt";
 					arm,vexpress-sysreg,func = <2 0>;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/arm/vexpress-v2p-ca15-tc1.dts
index 679537e17ff5..5a91e936edef 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
+++ b/arch/arm/boot/dts/arm/vexpress-v2p-ca15-tc1.dts
@@ -142,7 +142,7 @@
 		compatible = "arm,vexpress,config-bus";
 		arm,vexpress,config-bridge = <&v2m_sysreg>;
 
-		oscclk0 {
+		clock-controller-0 {
 			/* CPU PLL reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 0>;
@@ -151,7 +151,7 @@
 			clock-output-names = "oscclk0";
 		};
 
-		oscclk4 {
+		clock-controller-4 {
 			/* Multiplexed AXI master clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 4>;
@@ -160,7 +160,7 @@
 			clock-output-names = "oscclk4";
 		};
 
-		hdlcd_clk: oscclk5 {
+		hdlcd_clk: clock-controller-5 {
 			/* HDLCD PLL reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 5>;
@@ -169,7 +169,7 @@
 			clock-output-names = "oscclk5";
 		};
 
-		smbclk: oscclk6 {
+		smbclk: clock-controller-6 {
 			/* SMB clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 6>;
@@ -178,7 +178,7 @@
 			clock-output-names = "oscclk6";
 		};
 
-		sys_pll: oscclk7 {
+		sys_pll: clock-controller-7 {
 			/* SYS PLL reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 7>;
@@ -187,7 +187,7 @@
 			clock-output-names = "oscclk7";
 		};
 
-		oscclk8 {
+		clock-controller-8 {
 			/* DDR2 PLL reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 8>;
@@ -196,7 +196,7 @@
 			clock-output-names = "oscclk8";
 		};
 
-		volt-cores {
+		regulator-cores {
 			/* CPU core voltage */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 0>;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/arm/vexpress-v2p-ca15_a7.dts
index 511e87cc2bc5..6ef23c53d2d8 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
+++ b/arch/arm/boot/dts/arm/vexpress-v2p-ca15_a7.dts
@@ -253,7 +253,7 @@
 		compatible = "arm,vexpress,config-bus";
 		arm,vexpress,config-bridge = <&v2m_sysreg>;
 
-		oscclk0 {
+		clock-controller-0 {
 			/* A15 PLL 0 reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 0>;
@@ -262,7 +262,7 @@
 			clock-output-names = "oscclk0";
 		};
 
-		oscclk1 {
+		clock-controller-1 {
 			/* A15 PLL 1 reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 1>;
@@ -271,7 +271,7 @@
 			clock-output-names = "oscclk1";
 		};
 
-		oscclk2 {
+		clock-controller-2 {
 			/* A7 PLL 0 reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 2>;
@@ -280,7 +280,7 @@
 			clock-output-names = "oscclk2";
 		};
 
-		oscclk3 {
+		clock-controller-3 {
 			/* A7 PLL 1 reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 3>;
@@ -289,7 +289,7 @@
 			clock-output-names = "oscclk3";
 		};
 
-		oscclk4 {
+		clock-controller-4 {
 			/* External AXI master clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 4>;
@@ -298,7 +298,7 @@
 			clock-output-names = "oscclk4";
 		};
 
-		hdlcd_clk: oscclk5 {
+		hdlcd_clk: clock-controller-5 {
 			/* HDLCD PLL reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 5>;
@@ -307,7 +307,7 @@
 			clock-output-names = "oscclk5";
 		};
 
-		smbclk: oscclk6 {
+		smbclk: clock-controller-6 {
 			/* Static memory controller clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 6>;
@@ -316,7 +316,7 @@
 			clock-output-names = "oscclk6";
 		};
 
-		oscclk7 {
+		clock-controller-7 {
 			/* SYS PLL reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 7>;
@@ -325,7 +325,7 @@
 			clock-output-names = "oscclk7";
 		};
 
-		oscclk8 {
+		clock-controller-8 {
 			/* DDR2 PLL reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 8>;
@@ -334,7 +334,7 @@
 			clock-output-names = "oscclk8";
 		};
 
-		volt-a15 {
+		regulator-a15 {
 			/* A15 CPU core voltage */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 0>;
@@ -345,7 +345,7 @@
 			label = "A15 Vcore";
 		};
 
-		volt-a7 {
+		regulator-a7 {
 			/* A7 CPU core voltage */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 1>;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/arm/vexpress-v2p-ca5s.dts
index 3b88209bacea..e3896253f33e 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
+++ b/arch/arm/boot/dts/arm/vexpress-v2p-ca5s.dts
@@ -132,6 +132,7 @@
 		reg = <0x2c0f0000 0x1000>;
 		interrupts = <0 84 4>;
 		cache-level = <2>;
+		cache-unified;
 	};
 
 	pmu {
@@ -144,7 +145,7 @@
 		compatible = "arm,vexpress,config-bus";
 		arm,vexpress,config-bridge = <&v2m_sysreg>;
 
-		cpu_clk: oscclk0 {
+		cpu_clk: clock-controller-0 {
 			/* CPU and internal AXI reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 0>;
@@ -153,7 +154,7 @@
 			clock-output-names = "oscclk0";
 		};
 
-		axi_clk: oscclk1 {
+		axi_clk: clock-controller-1 {
 			/* Multiplexed AXI master clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 1>;
@@ -162,7 +163,7 @@
 			clock-output-names = "oscclk1";
 		};
 
-		oscclk2 {
+		clock-controller-2 {
 			/* DDR2 */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 2>;
@@ -171,7 +172,7 @@
 			clock-output-names = "oscclk2";
 		};
 
-		hdlcd_clk: oscclk3 {
+		hdlcd_clk: clock-controller-3 {
 			/* HDLCD */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 3>;
@@ -180,7 +181,7 @@
 			clock-output-names = "oscclk3";
 		};
 
-		oscclk4 {
+		clock-controller-4 {
 			/* Test chip gate configuration */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 4>;
@@ -189,7 +190,7 @@
 			clock-output-names = "oscclk4";
 		};
 
-		smbclk: oscclk5 {
+		smbclk: clock-controller-5 {
 			/* SMB clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 5>;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/arm/vexpress-v2p-ca9.dts
index 5916e4877eac..43a5a4ab6ff0 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts
+++ b/arch/arm/boot/dts/arm/vexpress-v2p-ca9.dts
@@ -20,7 +20,9 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 
-	chosen { };
+	chosen {
+		stdout-path = &v2m_serial0;
+	};
 
 	aliases {
 		serial0 = &v2m_serial0;
@@ -185,7 +187,7 @@
 		compatible = "arm,vexpress,config-bus";
 		arm,vexpress,config-bridge = <&v2m_sysreg>;
 
-		oscclk0: extsaxiclk {
+		oscclk0: clock-controller-0 {
 			/* ACLK clock to the AXI master port on the test chip */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 0>;
@@ -194,7 +196,7 @@
 			clock-output-names = "extsaxiclk";
 		};
 
-		oscclk1: clcdclk {
+		oscclk1: clock-controller-1 {
 			/* Reference clock for the CLCD */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 1>;
@@ -203,7 +205,7 @@
 			clock-output-names = "clcdclk";
 		};
 
-		smbclk: oscclk2: tcrefclk {
+		smbclk: oscclk2: clock-controller-2 {
 			/* Reference clock for the test chip internal PLLs */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 2>;
@@ -212,7 +214,7 @@
 			clock-output-names = "tcrefclk";
 		};
 
-		volt-vd10 {
+		regulator-vd10 {
 			/* Test Chip internal logic voltage */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 0>;
@@ -221,7 +223,7 @@
 			label = "VD10";
 		};
 
-		volt-vd10-s2 {
+		regulator-vd10-s2 {
 			/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 1>;
@@ -230,7 +232,7 @@
 			label = "VD10_S2";
 		};
 
-		volt-vd10-s3 {
+		regulator-vd10-s3 {
 			/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 2>;
@@ -239,7 +241,7 @@
 			label = "VD10_S3";
 		};
 
-		volt-vcc1v8 {
+		regulator-vcc1v8 {
 			/* DDR2 SDRAM and Test Chip DDR2 I/O supply */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 3>;
@@ -248,7 +250,7 @@
 			label = "VCC1V8";
 		};
 
-		volt-ddr2vtt {
+		regulator-ddr2vtt {
 			/* DDR2 SDRAM VTT termination voltage */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 4>;
@@ -257,7 +259,7 @@
 			label = "DDR2VTT";
 		};
 
-		volt-vcc3v3 {
+		regulator-vcc3v3 {
 			/* Local board supply for miscellaneous logic external to the Test Chip */
 			arm,vexpress-sysreg,func = <2 5>;
 			compatible = "arm,vexpress-volt";
diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts b/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
deleted file mode 100644
index 3cf70c72c5ca..000000000000
--- a/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
+++ /dev/null
@@ -1,131 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree file for Seagate NAS 4-Bay (Armada 370 SoC).
- *
- * Copyright (C) 2015 Seagate
- *
- * Author: Vincent Donnefort <vdonnefort@gmail.com>
- */
-
-/*
- * Here are some information allowing to identify the device:
- *
- * Product name                 : Seagate NAS 4-Bay
- * Code name (board/PCB)        : Dart 4-Bay
- * Model name (case sticker)    : SRPD40
- * Material desc (product spec) : STCUxxxxxxx
- */
-
-/dts-v1/;
-#include "armada-370-seagate-nas-xbay.dtsi"
-#include <dt-bindings/leds/leds-ns2.h>
-
-/ {
-	model = "Seagate NAS 4-Bay (Dart, SRPD40)";
-	compatible = "seagate,dart-4", "marvell,armada370", "marvell,armada-370-xp";
-
-	soc {
-		internal-regs {
-			ethernet@74000 {
-				status = "okay";
-				pinctrl-0 = <&ge1_rgmii_pins>;
-				pinctrl-names = "default";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-			i2c@11000 {
-				/* I2C GPIO expander (PCA9554A) */
-				pca9554: pca9554@21 {
-					compatible = "nxp,pca9554";
-					reg = <0x21>;
-					#gpio-cells = <2>;
-					gpio-controller;
-				};
-			};
-		};
-	};
-
-	regulators {
-		regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "SATA2 power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&pca9554 6 GPIO_ACTIVE_HIGH>;
-		};
-		regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "SATA3 power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&pca9554 7 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-leds {
-		red-sata2 {
-			label = "dart:red:sata2";
-			gpios = <&pca9554 0 GPIO_ACTIVE_LOW>;
-		};
-		red-sata3 {
-			label = "dart:red:sata3";
-			gpios = <&pca9554 3 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	leds-ns2 {
-		compatible = "lacie,ns2-leds";
-
-		white-sata2 {
-			label = "dart:white:sata2";
-			cmd-gpio = <&pca9554 1 GPIO_ACTIVE_HIGH>;
-			slow-gpio = <&pca9554 2 GPIO_ACTIVE_HIGH>;
-			num-modes = <4>;
-			modes-map = <NS_V2_LED_SATA 0 0
-				     NS_V2_LED_OFF  0 1
-				     NS_V2_LED_ON   1 0
-				     NS_V2_LED_ON   1 1>;
-		};
-		white-sata3 {
-			label = "dart:white:sata3";
-			cmd-gpio = <&pca9554 4 GPIO_ACTIVE_HIGH>;
-			slow-gpio = <&pca9554 5 GPIO_ACTIVE_HIGH>;
-			num-modes = <4>;
-			modes-map = <NS_V2_LED_SATA 0 0
-				     NS_V2_LED_OFF  0 1
-				     NS_V2_LED_ON   1 0
-				     NS_V2_LED_ON   1 1>;
-		};
-	};
-
-	gpio-fan {
-		gpio-fan,speed-map =
-			<   0 3
-			  800 2
-			  1050 1
-			  1300 0>;
-	};
-};
-
-&pciec {
-	/* SATA AHCI controller 88SE9170 */
-	pcie@1,0 {
-		status = "okay";
-	};
-};
-
-&mdio {
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
-};
-
diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts b/arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts
deleted file mode 100644
index 5ee572dc9242..000000000000
--- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree file for Seagate Personal Cloud NAS 2-Bay (Armada 370 SoC).
- *
- * Copyright (C) 2015 Seagate
- *
- * Author: Simon Guinot <simon.guinot@sequanux.org>
- */
-
-/*
- * Here are some information allowing to identify the device:
- *
- * Product name                 : Seagate Personal Cloud 2-Bay
- * Code name (board/PCB)        : Cumulus Max
- * Model name (case sticker)    : SRN22C
- * Material desc (product spec) : STCSxxxxxxx
- */
-
-/dts-v1/;
-#include "armada-370-seagate-personal-cloud.dtsi"
-
-/ {
-	model = "Seagate Personal Cloud 2-Bay (Cumulus, SRN22C)";
-	compatible = "seagate,cumulus-max", "marvell,armada370", "marvell,armada-370-xp";
-
-	soc {
-		internal-regs {
-			sata@a0000 {
-				status = "okay";
-				nr-ports = <2>;
-			};
-		};
-	};
-
-	regulators {
-		regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "SATA1 power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi
deleted file mode 100644
index cff1269f3fbf..000000000000
--- a/arch/arm/boot/dts/armada-380.dtsi
+++ /dev/null
@@ -1,118 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree Include file for Marvell Armada 380 SoC.
- *
- * Copyright (C) 2014 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- */
-
-#include "armada-38x.dtsi"
-
-/ {
-	model = "Marvell Armada 380 family SoC";
-	compatible = "marvell,armada380";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,armada-380-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-	};
-
-	soc {
-		internal-regs {
-			pinctrl@18000 {
-				compatible = "marvell,mv88f6810-pinctrl";
-			};
-		};
-
-		pcie {
-			compatible = "marvell,armada-370-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
-				0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
-				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
-				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
-				0x82000000 0x1 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO  */
-				0x82000000 0x2 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
-				0x81000000 0x2 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO  */
-				0x82000000 0x3 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
-				0x81000000 0x3 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO  */>;
-
-			/* x1 port */
-			pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 8>;
-				status = "disabled";
-			};
-
-			/* x1 port */
-			pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-			};
-
-			/* x1 port */
-			pcie@3,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
-				reg = <0x1800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
-					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <2>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 6>;
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts b/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts
deleted file mode 100644
index c9ac630e5874..000000000000
--- a/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts
+++ /dev/null
@@ -1,115 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-
-#include "armada-385-clearfog-gtr.dtsi"
-
-/ {
-	model = "SolidRun Clearfog GTR L8";
-};
-
-&mdio {
-	switch0: switch0@4 {
-		compatible = "marvell,mv88e6190";
-		reg = <4>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&cf_gtr_switch_reset_pins>;
-		reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@1 {
-				reg = <1>;
-				label = "lan8";
-				phy-handle = <&switch0phy0>;
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan7";
-				phy-handle = <&switch0phy1>;
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "lan6";
-				phy-handle = <&switch0phy2>;
-			};
-
-			port@4 {
-				reg = <4>;
-				label = "lan5";
-				phy-handle = <&switch0phy3>;
-			};
-
-			port@5 {
-				reg = <5>;
-				label = "lan4";
-				phy-handle = <&switch0phy4>;
-			};
-
-			port@6 {
-				reg = <6>;
-				label = "lan3";
-				phy-handle = <&switch0phy5>;
-			};
-
-			port@7 {
-				reg = <7>;
-				label = "lan2";
-				phy-handle = <&switch0phy6>;
-			};
-
-			port@8 {
-				reg = <8>;
-				label = "lan1";
-				phy-handle = <&switch0phy7>;
-			};
-
-			port@10 {
-				reg = <10>;
-				label = "cpu";
-				ethernet = <&eth1>;
-			};
-
-		};
-
-		mdio {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			switch0phy0: switch0phy0@1 {
-				reg = <0x1>;
-			};
-
-			switch0phy1: switch0phy1@2 {
-				reg = <0x2>;
-			};
-
-			switch0phy2: switch0phy2@3 {
-				reg = <0x3>;
-			};
-
-			switch0phy3: switch0phy3@4 {
-				reg = <0x4>;
-			};
-
-			switch0phy4: switch0phy4@5 {
-				reg = <0x5>;
-			};
-
-			switch0phy5: switch0phy5@6 {
-				reg = <0x6>;
-			};
-
-			switch0phy6: switch0phy6@7 {
-				reg = <0x7>;
-			};
-
-			switch0phy7: switch0phy7@8 {
-				reg = <0x8>;
-			};
-		};
-
-	};
-};
diff --git a/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts b/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts
deleted file mode 100644
index fa653b379490..000000000000
--- a/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts
+++ /dev/null
@@ -1,79 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-
-#include "armada-385-clearfog-gtr.dtsi"
-
-/ {
-	model = "SolidRun Clearfog GTR S4";
-};
-
-&sfp0 {
-	tx-fault-gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>;
-};
-
-&mdio {
-	switch0: switch0@4 {
-		compatible = "marvell,mv88e6085";
-		reg = <4>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&cf_gtr_switch_reset_pins>;
-		reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@1 {
-				reg = <1>;
-				label = "lan2";
-				phy-handle = <&switch0phy0>;
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan1";
-				phy-handle = <&switch0phy1>;
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "lan4";
-				phy-handle = <&switch0phy2>;
-			};
-
-			port@4 {
-				reg = <4>;
-				label = "lan3";
-				phy-handle = <&switch0phy3>;
-			};
-
-			port@5 {
-				reg = <5>;
-				label = "cpu";
-				ethernet = <&eth1>;
-			};
-
-		};
-
-		mdio {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			switch0phy0: switch0phy0@11 {
-				reg = <0x11>;
-			};
-
-			switch0phy1: switch0phy1@12 {
-				reg = <0x12>;
-			};
-
-			switch0phy2: switch0phy2@13 {
-				reg = <0x13>;
-			};
-
-			switch0phy3: switch0phy3@14 {
-				reg = <0x14>;
-			};
-		};
-
-	};
-};
diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi
deleted file mode 100644
index f0022d10c715..000000000000
--- a/arch/arm/boot/dts/armada-385.dtsi
+++ /dev/null
@@ -1,149 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree Include file for Marvell Armada 385 SoC.
- *
- * Copyright (C) 2014 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- */
-
-#include "armada-38x.dtsi"
-
-/ {
-	model = "Marvell Armada 385 family SoC";
-	compatible = "marvell,armada385", "marvell,armada380";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,armada-380-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-		};
-	};
-
-	soc {
-		pciec: pcie {
-			compatible = "marvell,armada-370-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
-				0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
-				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
-				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
-				0x82000000 0x1 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO  */
-				0x82000000 0x2 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
-				0x81000000 0x2 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO  */
-				0x82000000 0x3 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
-				0x81000000 0x3 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO  */
-				0x82000000 0x4 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 3 MEM */
-				0x81000000 0x4 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 3 IO  */>;
-
-			/*
-			 * This port can be either x4 or x1. When
-			 * configured in x4 by the bootloader, then
-			 * pcie@4,0 is not available.
-			 */
-			pcie1: pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 8>;
-				status = "disabled";
-			};
-
-			/* x1 port */
-			pcie2: pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-			};
-
-			/* x1 port */
-			pcie3: pcie@3,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
-				reg = <0x1800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
-					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <2>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 6>;
-				status = "disabled";
-			};
-
-			/*
-			 * x1 port only available when pcie@1,0 is
-			 * configured as a x1 port
-			 */
-			pcie4: pcie@4,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
-				reg = <0x2000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
-					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <3>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 7>;
-				status = "disabled";
-			};
-		};
-	};
-};
-
-&pinctrl {
-	compatible = "marvell,mv88f6820-pinctrl";
-};
diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts
deleted file mode 100644
index a2bec07bf4c5..000000000000
--- a/arch/arm/boot/dts/armada-388-db.dts
+++ /dev/null
@@ -1,176 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for Marvell Armada 388 evaluation board
- * (DB-88F6820)
- *
- *  Copyright (C) 2014 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- */
-
-/dts-v1/;
-#include "armada-388.dtsi"
-
-/ {
-	model = "Marvell Armada 385 Development Board";
-	compatible = "marvell,a385-db", "marvell,armada388",
-		"marvell,armada385", "marvell,armada380";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>; /* 256 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
-			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
-
-		internal-regs {
-			i2c@11000 {
-				status = "okay";
-				clock-frequency = <100000>;
-			};
-
-			i2c@11100 {
-				status = "okay";
-				clock-frequency = <100000>;
-			};
-
-			serial@12000 {
-				status = "okay";
-			};
-
-			ethernet@30000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-				buffer-manager = <&bm>;
-				bm,pool-long = <2>;
-				bm,pool-short = <3>;
-			};
-
-			usb@58000 {
-				status = "ok";
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-				buffer-manager = <&bm>;
-				bm,pool-long = <0>;
-				bm,pool-short = <1>;
-			};
-
-			mdio@72004 {
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-			};
-
-			sata@a8000 {
-				status = "okay";
-			};
-
-			sata@e0000 {
-				status = "okay";
-			};
-
-			bm@c8000 {
-				status = "okay";
-			};
-
-			sdhci@d8000 {
-				broken-cd;
-				wp-inverted;
-				bus-width = <8>;
-				status = "okay";
-				no-1-8-v;
-			};
-
-			usb3@f0000 {
-				status = "okay";
-			};
-
-			usb3@f8000 {
-				status = "okay";
-			};
-		};
-
-		bm-bppi {
-			status = "okay";
-		};
-
-		pcie {
-			status = "okay";
-			/*
-			 * The two PCIe units are accessible through
-			 * standard PCIe slots on the board.
-			 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
-	};
-};
-
-&spi0 {
-	status = "okay";
-
-	spi-flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "w25q32", "jedec,spi-nor";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <108000000>;
-	};
-};
-
-&nand_controller {
-	status = "okay";
-
-	nand@0 {
-		reg = <0>;
-		label = "pxa3xx_nand-0";
-		nand-rb = <0>;
-		marvell,nand-keep-config;
-		nand-on-flash-bbt;
-		nand-ecc-strength = <4>;
-		nand-ecc-step-size = <512>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "U-Boot";
-				reg = <0 0x800000>;
-			};
-			partition@800000 {
-				label = "Linux";
-				reg = <0x800000 0x800000>;
-			};
-			partition@1000000 {
-				label = "Filesystem";
-				reg = <0x1000000 0x3f000000>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
deleted file mode 100644
index 8558bf6bb54c..000000000000
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ /dev/null
@@ -1,207 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree Include file for Marvell Armada XP family SoC
- *
- * Copyright (C) 2012 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * Contains definitions specific to the Armada XP MV78230 SoC that are not
- * common to all Armada XP SoCs.
- */
-
-#include "armada-xp.dtsi"
-
-/ {
-	model = "Marvell Armada XP MV78230 SoC";
-	compatible = "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,armada-xp-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <0>;
-			clocks = <&cpuclk 0>;
-			clock-latency = <1000000>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <1>;
-			clocks = <&cpuclk 1>;
-			clock-latency = <1000000>;
-		};
-	};
-
-	soc {
-		/*
-		 * MV78230 has 2 PCIe units Gen2.0: One unit can be
-		 * configured as x4 or quad x1 lanes. One unit is
-		 * x1 only.
-		 */
-		pciec: pcie@82000000 {
-			compatible = "marvell,armada-xp-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
-				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
-				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
-				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
-				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
-				0x82000000 0x1 0       MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
-				0x81000000 0x1 0       MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
-				0x82000000 0x2 0       MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
-				0x81000000 0x2 0       MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
-				0x82000000 0x3 0       MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
-				0x81000000 0x3 0       MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
-				0x82000000 0x4 0       MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
-				0x81000000 0x4 0       MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
-				0x82000000 0x5 0       MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
-				0x81000000 0x5 0       MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */>;
-
-			pcie1: pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 58>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-			};
-
-			pcie2: pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 59>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <1>;
-				clocks = <&gateclk 6>;
-				status = "disabled";
-			};
-
-			pcie3: pcie@3,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
-				reg = <0x1800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
-					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 60>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <2>;
-				clocks = <&gateclk 7>;
-				status = "disabled";
-			};
-
-			pcie4: pcie@4,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
-				reg = <0x2000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
-					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 61>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <3>;
-				clocks = <&gateclk 8>;
-				status = "disabled";
-			};
-
-			pcie5: pcie@5,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
-				reg = <0x2800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
-					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 62>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 9>;
-				status = "disabled";
-			};
-		};
-
-		internal-regs {
-			gpio0: gpio@18100 {
-				compatible = "marvell,armada-370-gpio",
-					     "marvell,orion-gpio";
-				reg = <0x18100 0x40>, <0x181c0 0x08>;
-				reg-names = "gpio", "pwm";
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				#pwm-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <82>, <83>, <84>, <85>;
-				clocks = <&coreclk 0>;
-			};
-
-			gpio1: gpio@18140 {
-				compatible = "marvell,armada-370-gpio",
-					     "marvell,orion-gpio";
-				reg = <0x18140 0x40>, <0x181c8 0x08>;
-				reg-names = "gpio", "pwm";
-				ngpios = <17>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				#pwm-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <87>, <88>, <89>;
-				clocks = <&coreclk 0>;
-			};
-		};
-	};
-};
-
-&pinctrl {
-	compatible = "marvell,mv78230-pinctrl";
-};
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
deleted file mode 100644
index 2d85fe8ac327..000000000000
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ /dev/null
@@ -1,314 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree Include file for Marvell Armada XP family SoC
- *
- * Copyright (C) 2012 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * Contains definitions specific to the Armada XP MV78260 SoC that are not
- * common to all Armada XP SoCs.
- */
-
-#include "armada-xp.dtsi"
-
-/ {
-	model = "Marvell Armada XP MV78260 SoC";
-	compatible = "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,armada-xp-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <0>;
-			clocks = <&cpuclk 0>;
-			clock-latency = <1000000>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <1>;
-			clocks = <&cpuclk 1>;
-			clock-latency = <1000000>;
-		};
-	};
-
-	soc {
-		/*
-		 * MV78260 has 3 PCIe units Gen2.0: Two units can be
-		 * configured as x4 or quad x1 lanes. One unit is
-		 * x4 only.
-		 */
-		pciec: pcie@82000000 {
-			compatible = "marvell,armada-xp-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
-				0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
-				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
-				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
-				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
-				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
-				0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000   /* Port 1.1 registers */
-				0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000   /* Port 1.2 registers */
-				0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000   /* Port 1.3 registers */
-				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
-				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
-				0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
-				0x82000000 0x3 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
-				0x81000000 0x3 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
-				0x82000000 0x4 0     MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
-				0x81000000 0x4 0     MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
-
-				0x82000000 0x5 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
-				0x81000000 0x5 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
-				0x82000000 0x6 0     MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
-				0x81000000 0x6 0     MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO  */
-				0x82000000 0x7 0     MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
-				0x81000000 0x7 0     MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO  */
-				0x82000000 0x8 0     MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
-				0x81000000 0x8 0     MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO  */
-
-				0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
-				0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */>;
-
-			pcie1: pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 58>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-			};
-
-			pcie2: pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 59>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <1>;
-				clocks = <&gateclk 6>;
-				status = "disabled";
-			};
-
-			pcie3: pcie@3,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
-				reg = <0x1800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
-					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 60>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <2>;
-				clocks = <&gateclk 7>;
-				status = "disabled";
-			};
-
-			pcie4: pcie@4,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
-				reg = <0x2000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
-					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 61>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <3>;
-				clocks = <&gateclk 8>;
-				status = "disabled";
-			};
-
-			pcie5: pcie@5,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
-				reg = <0x2800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
-					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 62>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 9>;
-				status = "disabled";
-			};
-
-			pcie6: pcie@6,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x84000 0 0x2000>;
-				reg = <0x3000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
-					  0x81000000 0 0 0x81000000 0x6 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 63>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <1>;
-				clocks = <&gateclk 10>;
-				status = "disabled";
-			};
-
-			pcie7: pcie@7,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x88000 0 0x2000>;
-				reg = <0x3800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
-					  0x81000000 0 0 0x81000000 0x7 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 64>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <2>;
-				clocks = <&gateclk 11>;
-				status = "disabled";
-			};
-
-			pcie8: pcie@8,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>;
-				reg = <0x4000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
-					  0x81000000 0 0 0x81000000 0x8 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 65>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <3>;
-				clocks = <&gateclk 12>;
-				status = "disabled";
-			};
-
-			pcie9: pcie@9,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
-				reg = <0x4800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
-					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 99>;
-				marvell,pcie-port = <2>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 26>;
-				status = "disabled";
-			};
-		};
-
-		internal-regs {
-			gpio0: gpio@18100 {
-				compatible = "marvell,armada-370-gpio",
-					     "marvell,orion-gpio";
-				reg = <0x18100 0x40>, <0x181c0 0x08>;
-				reg-names = "gpio", "pwm";
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				#pwm-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <82>, <83>, <84>, <85>;
-				clocks = <&coreclk 0>;
-			};
-
-			gpio1: gpio@18140 {
-				compatible = "marvell,armada-370-gpio",
-					     "marvell,orion-gpio";
-				reg = <0x18140 0x40>, <0x181c8 0x08>;
-				reg-names = "gpio", "pwm";
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				#pwm-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <87>, <88>, <89>, <90>;
-				clocks = <&coreclk 0>;
-			};
-
-			gpio2: gpio@18180 {
-				compatible = "marvell,armada-370-gpio",
-					     "marvell,orion-gpio";
-				reg = <0x18180 0x40>;
-				ngpios = <3>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <91>;
-			};
-
-			eth3: ethernet@34000 {
-				compatible = "marvell,armada-xp-neta";
-				reg = <0x34000 0x4000>;
-				interrupts = <14>;
-				clocks = <&gateclk 1>;
-				status = "disabled";
-			};
-		};
-	};
-};
-
-&pinctrl {
-	compatible = "marvell,mv78260-pinctrl";
-};
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
deleted file mode 100644
index 230a3fd36b30..000000000000
--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+++ /dev/null
@@ -1,353 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree Include file for Marvell Armada XP family SoC
- *
- * Copyright (C) 2012 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * Contains definitions specific to the Armada XP MV78460 SoC that are not
- * common to all Armada XP SoCs.
- */
-
-#include "armada-xp.dtsi"
-
-/ {
-	model = "Marvell Armada XP MV78460 SoC";
-	compatible = "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-	};
-
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,armada-xp-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <0>;
-			clocks = <&cpuclk 0>;
-			clock-latency = <1000000>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <1>;
-			clocks = <&cpuclk 1>;
-			clock-latency = <1000000>;
-		};
-
-		cpu@2 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <2>;
-			clocks = <&cpuclk 2>;
-			clock-latency = <1000000>;
-		};
-
-		cpu@3 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <3>;
-			clocks = <&cpuclk 3>;
-			clock-latency = <1000000>;
-		};
-	};
-
-	soc {
-		/*
-		 * MV78460 has 4 PCIe units Gen2.0: Two units can be
-		 * configured as x4 or quad x1 lanes. Two units are
-		 * x4/x1.
-		 */
-		pciec: pcie@82000000 {
-			compatible = "marvell,armada-xp-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
-				0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
-				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
-				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
-				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
-				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
-				0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000   /* Port 3.0 registers */
-				0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000   /* Port 1.1 registers */
-				0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000   /* Port 1.2 registers */
-				0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000   /* Port 1.3 registers */
-				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
-				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
-				0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
-				0x82000000 0x3 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
-				0x81000000 0x3 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
-				0x82000000 0x4 0     MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
-				0x81000000 0x4 0     MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
-
-				0x82000000 0x5 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
-				0x81000000 0x5 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
-				0x82000000 0x6 0     MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
-				0x81000000 0x6 0     MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO  */
-				0x82000000 0x7 0     MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
-				0x81000000 0x7 0     MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO  */
-				0x82000000 0x8 0     MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
-				0x81000000 0x8 0     MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO  */
-
-				0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
-				0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */
-
-				0x82000000 0xa 0     MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
-				0x81000000 0xa 0     MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO  */>;
-
-			pcie1: pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 58>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-			};
-
-			pcie2: pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 59>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <1>;
-				clocks = <&gateclk 6>;
-				status = "disabled";
-			};
-
-			pcie3: pcie@3,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
-				reg = <0x1800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
-					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 60>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <2>;
-				clocks = <&gateclk 7>;
-				status = "disabled";
-			};
-
-			pcie4: pcie@4,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
-				reg = <0x2000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
-					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 61>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <3>;
-				clocks = <&gateclk 8>;
-				status = "disabled";
-			};
-
-			pcie5: pcie@5,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
-				reg = <0x2800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
-					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 62>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 9>;
-				status = "disabled";
-			};
-
-			pcie6: pcie@6,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
-				reg = <0x3000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
-					  0x81000000 0 0 0x81000000 0x6 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 63>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <1>;
-				clocks = <&gateclk 10>;
-				status = "disabled";
-			};
-
-			pcie7: pcie@7,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
-				reg = <0x3800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
-					  0x81000000 0 0 0x81000000 0x7 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 64>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <2>;
-				clocks = <&gateclk 11>;
-				status = "disabled";
-			};
-
-			pcie8: pcie@8,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
-				reg = <0x4000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
-					  0x81000000 0 0 0x81000000 0x8 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 65>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <3>;
-				clocks = <&gateclk 12>;
-				status = "disabled";
-			};
-
-			pcie9: pcie@9,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
-				reg = <0x4800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
-					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 99>;
-				marvell,pcie-port = <2>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 26>;
-				status = "disabled";
-			};
-
-			pcie10: pcie@a,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
-				reg = <0x5000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
-					  0x81000000 0 0 0x81000000 0xa 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 103>;
-				marvell,pcie-port = <3>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 27>;
-				status = "disabled";
-			};
-		};
-
-		internal-regs {
-			gpio0: gpio@18100 {
-				compatible = "marvell,armada-370-gpio",
-					     "marvell,orion-gpio";
-				reg = <0x18100 0x40>, <0x181c0 0x08>;
-				reg-names = "gpio", "pwm";
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				#pwm-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <82>, <83>, <84>, <85>;
-				clocks = <&coreclk 0>;
-			};
-
-			gpio1: gpio@18140 {
-				compatible = "marvell,armada-370-gpio",
-					     "marvell,orion-gpio";
-				reg = <0x18140 0x40>, <0x181c8 0x08>;
-				reg-names = "gpio", "pwm";
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				#pwm-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <87>, <88>, <89>, <90>;
-				clocks = <&coreclk 0>;
-			};
-
-			gpio2: gpio@18180 {
-				compatible = "marvell,armada-370-gpio",
-					     "marvell,orion-gpio";
-				reg = <0x18180 0x40>;
-				ngpios = <3>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <91>;
-			};
-
-			eth3: ethernet@34000 {
-				compatible = "marvell,armada-xp-neta";
-				reg = <0x34000 0x4000>;
-				interrupts = <14>;
-				clocks = <&gateclk 1>;
-				status = "disabled";
-			};
-		};
-	};
-};
-
-&pinctrl {
-	compatible = "marvell,mv78460-pinctrl";
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
deleted file mode 100644
index 57b0c45a2298..000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
+++ /dev/null
@@ -1,607 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/dts-v1/;
-#include "aspeed-g5.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-
-/ {
-	model = "Ampere Mt. Jade BMC";
-	compatible = "ampere,mtjade-bmc", "aspeed,ast2500";
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlycon";
-	};
-
-	memory@80000000 {
-		reg = <0x80000000 0x20000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		vga_memory: framebuffer@9f000000 {
-			no-map;
-			reg = <0x9f000000 0x01000000>; /* 16M */
-		};
-
-		gfx_memory: framebuffer {
-			size = <0x01000000>;
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-
-		video_engine_memory: jpegbuffer {
-			size = <0x02000000>;	/* 32M */
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		fault {
-			gpios = <&gpio ASPEED_GPIO(B, 6) GPIO_ACTIVE_HIGH>;
-		};
-
-		identify {
-			gpios = <&gpio ASPEED_GPIO(Q, 6) GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		shutdown_ack {
-			label = "SHUTDOWN_ACK";
-			gpios = <&gpio ASPEED_GPIO(G, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(G, 2)>;
-		};
-
-		reboot_ack {
-			label = "REBOOT_ACK";
-			gpios = <&gpio ASPEED_GPIO(J, 3) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(J, 3)>;
-		};
-
-		S0_overtemp {
-			label = "S0_OVERTEMP";
-			gpios = <&gpio ASPEED_GPIO(G, 3) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(G, 3)>;
-		};
-
-		S0_hightemp {
-			label = "S0_HIGHTEMP";
-			gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(J, 0)>;
-		};
-
-		S0_cpu_fault {
-			label = "S0_CPU_FAULT";
-			gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>;
-			linux,code = <ASPEED_GPIO(J, 1)>;
-		};
-
-		S1_overtemp {
-			label = "S1_OVERTEMP";
-			gpios = <&gpio ASPEED_GPIO(Z, 6) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(Z, 6)>;
-		};
-
-		S1_hightemp {
-			label = "S1_HIGHTEMP";
-			gpios = <&gpio ASPEED_GPIO(AB, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(AB, 0)>;
-		};
-
-		S1_cpu_fault {
-			label = "S1_CPU_FAULT";
-			gpios = <&gpio ASPEED_GPIO(Z, 1) GPIO_ACTIVE_HIGH>;
-			linux,code = <ASPEED_GPIO(Z, 1)>;
-		};
-
-		id_button {
-			label = "ID_BUTTON";
-			gpios = <&gpio ASPEED_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(Q, 5)>;
-		};
-
-		psu1_vin_good {
-			label = "PSU1_VIN_GOOD";
-			gpios = <&gpio ASPEED_GPIO(H, 4) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(H, 4)>;
-		};
-
-		psu2_vin_good {
-			label = "PSU2_VIN_GOOD";
-			gpios = <&gpio ASPEED_GPIO(H, 5) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(H, 5)>;
-		};
-
-		psu1_present {
-			label = "PSU1_PRESENT";
-			gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(I, 0)>;
-		};
-
-		psu2_present {
-			label = "PSU2_PRESENT";
-			gpios = <&gpio ASPEED_GPIO(I, 1) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(I, 1)>;
-		};
-
-	};
-
-	gpioA0mux: mux-controller {
-		compatible = "gpio-mux";
-		#mux-control-cells = <0>;
-		mux-gpios = <&gpio ASPEED_GPIO(A, 0) GPIO_ACTIVE_LOW>;
-	};
-
-	adc0mux: adc0mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc 0>;
-		#io-channel-cells = <1>;
-		io-channel-names = "parent";
-		mux-controls = <&gpioA0mux>;
-		channels = "s0", "s1";
-	};
-
-	adc1mux: adc1mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc 1>;
-		#io-channel-cells = <1>;
-		io-channel-names = "parent";
-		mux-controls = <&gpioA0mux>;
-		channels = "s0", "s1";
-	};
-
-	adc2mux: adc2mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc 2>;
-		#io-channel-cells = <1>;
-		io-channel-names = "parent";
-		mux-controls = <&gpioA0mux>;
-		channels = "s0", "s1";
-	};
-
-	adc3mux: adc3mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc 3>;
-		#io-channel-cells = <1>;
-		io-channel-names = "parent";
-		mux-controls = <&gpioA0mux>;
-		channels = "s0", "s1";
-	};
-
-	adc4mux: adc4mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc 4>;
-		#io-channel-cells = <1>;
-		io-channel-names = "parent";
-		mux-controls = <&gpioA0mux>;
-		channels = "s0", "s1";
-	};
-
-	adc5mux: adc5mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc 5>;
-		#io-channel-cells = <1>;
-		io-channel-names = "parent";
-		mux-controls = <&gpioA0mux>;
-		channels = "s0", "s1";
-	};
-
-	adc6mux: adc6mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc 6>;
-		#io-channel-cells = <1>;
-		io-channel-names = "parent";
-		mux-controls = <&gpioA0mux>;
-		channels = "s0", "s1";
-	};
-
-	adc7mux: adc7mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc 7>;
-		#io-channel-cells = <1>;
-		io-channel-names = "parent";
-		mux-controls = <&gpioA0mux>;
-		channels = "s0", "s1";
-	};
-
-	adc8mux: adc8mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc 8>;
-		#io-channel-cells = <1>;
-		io-channel-names = "parent";
-		mux-controls = <&gpioA0mux>;
-		channels = "s0", "s1";
-	};
-
-	adc9mux: adc9mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc 9>;
-		#io-channel-cells = <1>;
-		io-channel-names = "parent";
-		mux-controls = <&gpioA0mux>;
-		channels = "s0", "s1";
-	};
-
-	adc10mux: adc10mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc 10>;
-		#io-channel-cells = <1>;
-		io-channel-names = "parent";
-		mux-controls = <&gpioA0mux>;
-		channels = "s0", "s1";
-	};
-
-	adc11mux: adc11mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc 11>;
-		#io-channel-cells = <1>;
-		io-channel-names = "parent";
-		mux-controls = <&gpioA0mux>;
-		channels = "s0", "s1";
-	};
-
-	adc12mux: adc12mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc 12>;
-		#io-channel-cells = <1>;
-		io-channel-names = "parent";
-		mux-controls = <&gpioA0mux>;
-		channels = "s0", "s1";
-	};
-
-	adc13mux: adc13mux {
-		compatible = "io-channel-mux";
-		io-channels = <&adc 13>;
-		#io-channel-cells = <1>;
-		io-channel-names = "parent";
-		mux-controls = <&gpioA0mux>;
-		channels = "s0", "s1";
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc0mux 0>, <&adc0mux 1>,
-			<&adc1mux 0>, <&adc1mux 1>,
-			<&adc2mux 0>, <&adc2mux 1>,
-			<&adc3mux 0>, <&adc3mux 1>,
-			<&adc4mux 0>, <&adc4mux 1>,
-			<&adc5mux 0>, <&adc5mux 1>,
-			<&adc6mux 0>, <&adc6mux 1>,
-			<&adc7mux 0>, <&adc7mux 1>,
-			<&adc8mux 0>, <&adc8mux 1>,
-			<&adc9mux 0>, <&adc9mux 1>,
-			<&adc10mux 0>, <&adc10mux 1>,
-			<&adc11mux 0>, <&adc11mux 1>,
-			<&adc12mux 0>, <&adc12mux 1>,
-			<&adc13mux 0>, <&adc13mux 1>;
-	};
-
-	iio-hwmon-adc14 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 14>;
-	};
-
-	iio-hwmon-battery {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 15>;
-	};
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bmc";
-		/* spi-max-frequency = <50000000>; */
-#include "openbmc-flash-layout-64.dtsi"
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "pnor";
-		/* spi-max-frequency = <100000000>; */
-	};
-};
-
-&uart1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd1_default
-			 &pinctrl_rxd1_default
-			 &pinctrl_ncts1_default
-			 &pinctrl_nrts1_default>;
-};
-
-&uart2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd2_default
-			 &pinctrl_rxd2_default>;
-};
-
-&uart3 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd3_default
-			 &pinctrl_rxd3_default>;
-};
-
-&uart4 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd4_default
-			 &pinctrl_rxd4_default>;
-};
-
-/* The BMC's uart */
-&uart5 {
-	status = "okay";
-};
-
-&mac0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii1_default>;
-	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
-		 <&syscon ASPEED_CLK_MAC1RCLK>;
-	clock-names = "MACCLK", "RCLK";
-	use-ncsi;
-};
-
-&mac1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
-};
-
-&i2c0 {
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-	eeprom@50 {
-		compatible = "microchip,24c64", "atmel,24c64";
-		reg = <0x50>;
-		pagesize = <32>;
-	};
-
-	inlet_mem2: tmp175@28 {
-		compatible = "ti,tmp175";
-		reg = <0x28>;
-	};
-
-	inlet_cpu: tmp175@29 {
-		compatible = "ti,tmp175";
-		reg = <0x29>;
-	};
-
-	inlet_mem1: tmp175@2a {
-		compatible = "ti,tmp175";
-		reg = <0x2a>;
-	};
-
-	outlet_cpu: tmp175@2b {
-		compatible = "ti,tmp175";
-		reg = <0x2b>;
-	};
-
-	outlet1: tmp175@2c {
-		compatible = "ti,tmp175";
-		reg = <0x2c>;
-	};
-
-	outlet2: tmp175@2d {
-		compatible = "ti,tmp175";
-		reg = <0x2d>;
-	};
-};
-
-&i2c4 {
-	status = "okay";
-	rtc@51 {
-		compatible = "nxp,pcf85063a";
-		reg = <0x51>;
-	};
-};
-
-&i2c5 {
-	status = "okay";
-};
-
-&i2c6 {
-	status = "okay";
-	psu@58 {
-		compatible = "pmbus";
-		reg = <0x58>;
-	};
-
-	psu@59 {
-		compatible = "pmbus";
-		reg = <0x59>;
-	};
-};
-
-&i2c7 {
-	status = "okay";
-};
-
-&i2c8 {
-	status = "okay";
-};
-
-&i2c9 {
-	status = "okay";
-};
-
-&i2c10 {
-	status = "okay";
-	adm1278@10 {
-		compatible = "adi,adm1278";
-		reg = <0x10>;
-	};
-
-	adm1278@11 {
-		compatible = "adi,adm1278";
-		reg = <0x11>;
-	};
-};
-
-&gfx {
-	status = "okay";
-	memory-region = <&gfx_memory>;
-};
-
-&pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-};
-
-&pwm_tacho {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2_default &pinctrl_pwm3_default
-			&pinctrl_pwm4_default &pinctrl_pwm5_default
-			&pinctrl_pwm6_default &pinctrl_pwm7_default>;
-
-	fan@0 {
-		reg = <0x02>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
-	};
-
-	fan@1 {
-		reg = <0x02>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
-	};
-
-	fan@2 {
-		reg = <0x03>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
-	};
-
-	fan@3 {
-		reg = <0x03>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
-	};
-
-	fan@4 {
-		reg = <0x04>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
-	};
-
-	fan@5 {
-		reg = <0x04>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
-	};
-
-	fan@6 {
-		reg = <0x05>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
-	};
-
-	fan@7 {
-		reg = <0x05>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
-	};
-
-	fan@8 {
-		reg = <0x06>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
-	};
-
-	fan@9 {
-		reg = <0x06>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
-	};
-
-	fan@10 {
-		reg = <0x07>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0e>;
-	};
-
-	fan@11 {
-		reg = <0x07>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0f>;
-	};
-
-};
-
-&vhub {
-	status = "okay";
-};
-
-&adc {
-	status = "okay";
-};
-
-&video {
-	status = "okay";
-	memory-region = <&video_engine_memory>;
-};
-
-&gpio {
-	gpio-line-names =
-	/*A0-A7*/	"","","","S0_BMC_SPECIAL_BOOT","","","","",
-	/*B0-B7*/	"BMC_SELECT_EEPROM","","","",
-			"POWER_BUTTON","","","",
-	/*C0-C7*/	"","","","","","","","",
-	/*D0-D7*/	"","","","","","","","",
-	/*E0-E7*/	"","","","","","","","",
-	/*F0-F7*/	"","","BMC_SYS_PSON_L","S0_DDR_SAVE","PGOOD",
-			"S1_DDR_SAVE","","",
-	/*G0-G7*/	"S0_FW_BOOT_OK","SHD_REQ_L","","S0_OVERTEMP_L","","",
-			"","",
-	/*H0-H7*/	"","","","","PSU1_VIN_GOOD","PSU2_VIN_GOOD","","",
-	/*I0-I7*/	"PSU1_PRESENT","PSU2_PRESENT","S1_BMC_SPECIAL_BOOT",
-			"","","","","",
-	/*J0-J7*/	"S0_HIGHTEMP_L","S0_FAULT_L","S0_SCP_AUTH_FAIL_L","",
-			"","","","",
-	/*K0-K7*/	"","","","","","","","",
-	/*L0-L7*/       "","","","BMC_SYSRESET_L","SPI_AUTH_FAIL_L","","","",
-	/*M0-M7*/	"","","","","","","","",
-	/*N0-N7*/	"","","","","","","","",
-	/*O0-O7*/	"","","","","","","","",
-	/*P0-P7*/	"","","","","","","","",
-	/*Q0-Q7*/	"","","","","","UID_BUTTON","","",
-	/*R0-R7*/	"","","BMC_EXT_HIGHTEMP_L","OCP_AUX_PWREN",
-			"OCP_MAIN_PWREN","RESET_BUTTON","","",
-	/*S0-S7*/	"","","","","","","","",
-	/*T0-T7*/	"","","","","","","","",
-	/*U0-U7*/	"","","","","","","","",
-	/*V0-V7*/	"","","","","","","","",
-	/*W0-W7*/	"","","","","","","","",
-	/*X0-X7*/	"","","","","","","","",
-	/*Y0-Y7*/	"","","","","","","","",
-	/*Z0-Z7*/	"S0_BMC_PLIMIT","S1_FAULT_L","S1_FW_BOOT_OK","","",
-			"S1_SCP_AUTH_FAIL_L","S1_OVERTEMP_L","",
-	/*AA0-AA7*/	"","","","","","","","",
-	/*AB0-AB7*/	"S1_HIGHTEMP_L","S1_BMC_PLIMIT","S0_BMC_DDR_ADDR",
-			"S1_BMC_DDR_ADR","","","","",
-	/*AC0-AC7*/	"SYS_PWR_GD","","","","","BMC_READY","SLAVE_PRESENT_L",
-			"BMC_OCP_PG";
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-arm-centriq2400-rep.dts b/arch/arm/boot/dts/aspeed-bmc-arm-centriq2400-rep.dts
deleted file mode 100644
index 3395de96ee11..000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-arm-centriq2400-rep.dts
+++ /dev/null
@@ -1,225 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/dts-v1/;
-
-#include "aspeed-g5.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-
-/ {
-	model = "Qualcomm Centriq 2400  REP AST2520";
-	compatible = "qualcomm,centriq2400-rep-bmc", "aspeed,ast2500";
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlycon";
-	};
-
-	memory@80000000 {
-		reg = <0x80000000 0x40000000>;
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
-                        <&adc 4>, <&adc 5>, <&adc 6>, <&adc 8>;
-	};
-
-	iio-hwmon-battery {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 7>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		uid_led {
-			label = "UID_LED";
-			gpios = <&gpio ASPEED_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
-		};
-
-		ras_error_led {
-			label = "RAS_ERROR_LED";
-			gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
-		};
-
-		system_fault {
-			label = "System_fault";
-			gpios = <&gpio ASPEED_GPIO(A, 1) GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bmc";
-#include "openbmc-flash-layout.dtsi"
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-	flash@0 {
-		status = "okay";
-	};
-};
-
-&spi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi2ck_default
-			&pinctrl_spi2miso_default
-			&pinctrl_spi2mosi_default
-			&pinctrl_spi2cs0_default>;
-};
-
-&uart3 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>;
-	current-speed = <115200>;
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&mac0 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
-};
-
-&i2c0 {
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-
-	tmp421@1e {
-		compatible = "ti,tmp421";
-		reg = <0x1e>;
-	};
-	tmp421@2a {
-		compatible = "ti,tmp421";
-		reg = <0x2a>;
-	};
-	tmp421@4e {
-		compatible = "ti,tmp421";
-		reg = <0x4e>;
-	};
-	tmp421@1c {
-		compatible = "ti,tmp421";
-		reg = <0x1c>;
-	};
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-};
-
-&i2c4 {
-	status = "okay";
-};
-
-&i2c5 {
-	status = "okay";
-};
-
-&i2c6 {
-	status = "okay";
-
-	tmp421@1d {
-		compatible = "ti,tmp421";
-		reg = <0x1d>;
-	};
-	tmp421@1f {
-		compatible = "ti,tmp421";
-		reg = <0x1f>;
-	};
-	tmp421@4d {
-		compatible = "ti,tmp421";
-		reg = <0x4d>;
-	};
-	tmp421@4f {
-		compatible = "ti,tmp421";
-		reg = <0x4f>;
-	};
-	nvt210@4c {
-		compatible = "nvt210";
-		reg = <0x4c>;
-	};
-	eeprom@50 {
-		compatible = "atmel,24c128";
-		reg = <0x50>;
-		pagesize = <128>;
-	};
-};
-
-&i2c7 {
-	status = "okay";
-};
-
-&i2c8 {
-	status = "okay";
-
-	pca9641@70 {
-		compatible = "nxp,pca9641";
-		reg = <0x70>;
-		i2c-arb {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			tmp421@1d {
-				compatible = "tmp421";
-				reg = <0x1d>;
-			};
-			adm1278@12 {
-				compatible = "adi,adm1278";
-				reg = <0x12>;
-				Rsense = <500>;
-			};
-			eeprom@50 {
-				compatible = "atmel,24c02";
-				reg = <0x50>;
-			};
-			ds1100@58 {
-				compatible = "ds1100";
-				reg = <0x58>;
-			};
-		};
-	};
-};
-
-&i2c9 {
-	status = "okay";
-};
-
-&vuart {
-	status = "okay";
-};
-
-&gfx {
-	status = "okay";
-};
-
-&pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-};
-
-&gpio {
-	pin_gpio_c7 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(C, 7) GPIO_ACTIVE_HIGH>;
-		output;
-		line-name = "BIOS_SPI_MUX_S";
-	};
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-cloudripper.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-cloudripper.dts
deleted file mode 100644
index 9c6271a17ae8..000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-cloudripper.dts
+++ /dev/null
@@ -1,544 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-// Copyright (c) 2020 Facebook Inc.
-
-/dts-v1/;
-
-#include <dt-bindings/leds/common.h>
-#include "ast2600-facebook-netbmc-common.dtsi"
-
-/ {
-	model = "Facebook Cloudripper BMC";
-	compatible = "facebook,cloudripper-bmc", "aspeed,ast2600";
-
-	aliases {
-		/*
-		 * PCA9548 (1-0070) provides 8 channels connecting to
-		 * SMB (Switch Main Board).
-		 */
-		i2c16 = &imux16;
-		i2c17 = &imux17;
-		i2c18 = &imux18;
-		i2c19 = &imux19;
-		i2c20 = &imux20;
-		i2c21 = &imux21;
-		i2c22 = &imux22;
-		i2c23 = &imux23;
-
-		/*
-		 * PCA9548 (2-0070) provides 8 channels connecting to
-		 * SCM (System Controller Module).
-		 */
-		i2c24 = &imux24;
-		i2c25 = &imux25;
-		i2c26 = &imux26;
-		i2c27 = &imux27;
-		i2c28 = &imux28;
-		i2c29 = &imux29;
-		i2c30 = &imux30;
-		i2c31 = &imux31;
-
-		/*
-		 * PCA9548 (3-0070) provides 8 channels connecting to
-		 * SMB (Switch Main Board).
-		 */
-		i2c32 = &imux32;
-		i2c33 = &imux33;
-		i2c34 = &imux34;
-		i2c35 = &imux35;
-		i2c36 = &imux36;
-		i2c37 = &imux37;
-		i2c38 = &imux38;
-		i2c39 = &imux39;
-
-		/*
-		 * PCA9548 (8-0070) provides 8 channels connecting to
-		 * PDB (Power Delivery Board).
-		 */
-		i2c40 = &imux40;
-		i2c41 = &imux41;
-		i2c42 = &imux42;
-		i2c43 = &imux43;
-		i2c44 = &imux44;
-		i2c45 = &imux45;
-		i2c46 = &imux46;
-		i2c47 = &imux47;
-
-		/*
-		 * PCA9548 (15-0076) provides 8 channels connecting to
-		 * FCM (Fan Controller Module).
-		 */
-		i2c48 = &imux48;
-		i2c49 = &imux49;
-		i2c50 = &imux50;
-		i2c51 = &imux51;
-		i2c52 = &imux52;
-		i2c53 = &imux53;
-		i2c54 = &imux54;
-		i2c55 = &imux55;
-	};
-
-	spi_gpio: spi-gpio {
-		num-chipselects = <2>;
-		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>,
-			   <&gpio0 ASPEED_GPIO(X, 1) GPIO_ACTIVE_HIGH>;
-
-		eeprom@1 {
-			compatible = "atmel,at93c46d";
-			spi-max-frequency = <250000>;
-			data-size = <16>;
-			spi-cs-high;
-			reg = <1>;
-		};
-	};
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-/*
- * "mdio1" is connected to the MDC/MDIO interface of the on-board
- * management switch (whose ports are connected to BMC, Host and front
- * panel ethernet port).
- */
-&mdio1 {
-	status = "okay";
-};
-
-&mdio3 {
-	status = "okay";
-
-	ethphy1: ethernet-phy@13 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <0x0d>;
-	};
-};
-
-&mac3 {
-	status = "okay";
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy1>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii4_default>;
-};
-
-&i2c0 {
-	multi-master;
-	bus-frequency = <1000000>;
-};
-
-&i2c1 {
-	/*
-	 * PCA9548 (1-0070) provides 8 channels connecting to SMB (Switch
-	 * Main Board).
-	 */
-	i2c-switch@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		i2c-mux-idle-disconnect;
-
-		imux16: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		imux17: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux18: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux19: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux20: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux21: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux22: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux23: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};
-
-&i2c2 {
-	/*
-	 * PCA9548 (2-0070) provides 8 channels connecting to SCM (System
-	 * Controller Module).
-	 */
-	i2c-switch@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		i2c-mux-idle-disconnect;
-
-		imux24: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		imux25: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux26: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux27: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux28: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux29: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux30: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux31: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};
-
-&i2c3 {
-	/*
-	 * PCA9548 (3-0070) provides 8 channels connecting to SMB (Switch
-	 * Main Board).
-	 */
-	i2c-switch@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		i2c-mux-idle-disconnect;
-
-		imux32: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		imux33: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux34: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux35: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux36: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux37: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux38: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux39: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};
-
-&i2c6 {
-	lp5012@14 {
-		compatible = "ti,lp5012";
-		reg = <0x14>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		multi-led@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-			color = <LED_COLOR_ID_MULTI>;
-			function = LED_FUNCTION_ACTIVITY;
-			label = "sys";
-
-			led@0 {
-				reg = <0>;
-				color = <LED_COLOR_ID_RED>;
-			};
-
-			led@1 {
-				reg = <1>;
-				color = <LED_COLOR_ID_BLUE>;
-			};
-
-			led@2 {
-				reg = <2>;
-				color = <LED_COLOR_ID_GREEN>;
-			};
-		};
-
-		multi-led@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-			color = <LED_COLOR_ID_MULTI>;
-			function = LED_FUNCTION_ACTIVITY;
-			label = "fan";
-
-			led@0 {
-				reg = <0>;
-				color = <LED_COLOR_ID_RED>;
-			};
-
-			led@1 {
-				reg = <1>;
-				color = <LED_COLOR_ID_BLUE>;
-			};
-
-			led@2 {
-				reg = <2>;
-				color = <LED_COLOR_ID_GREEN>;
-			};
-		};
-
-		multi-led@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-			color = <LED_COLOR_ID_MULTI>;
-			function = LED_FUNCTION_ACTIVITY;
-			label = "psu";
-
-			led@0 {
-				reg = <0>;
-				color = <LED_COLOR_ID_RED>;
-			};
-
-			led@1 {
-				reg = <1>;
-				color = <LED_COLOR_ID_BLUE>;
-			};
-
-			led@2 {
-				reg = <2>;
-				color = <LED_COLOR_ID_GREEN>;
-			};
-		};
-
-		multi-led@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-			color = <LED_COLOR_ID_MULTI>;
-			function = LED_FUNCTION_ACTIVITY;
-			label = "scm";
-
-			led@0 {
-				reg = <0>;
-				color = <LED_COLOR_ID_RED>;
-			};
-
-			led@1 {
-				reg = <1>;
-				color = <LED_COLOR_ID_BLUE>;
-			};
-
-			led@2 {
-				reg = <2>;
-				color = <LED_COLOR_ID_GREEN>;
-			};
-		};
-	};
-};
-
-&i2c8 {
-	/*
-	 * PCA9548 (8-0070) provides 8 channels connecting to PDB (Power
-	 * Delivery Board).
-	 */
-	i2c-switch@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		i2c-mux-idle-disconnect;
-
-		imux40: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		imux41: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux42: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux43: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux44: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux45: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux46: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux47: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-
-	};
-};
-
-&i2c15 {
-	/*
-	 * PCA9548 (15-0076) provides 8 channels connecting to FCM (Fan
-	 * Controller Module).
-	 */
-	i2c-switch@76 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x76>;
-		i2c-mux-idle-disconnect;
-
-		imux48: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		imux49: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux50: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux51: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux52: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux53: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux54: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux55: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-fuji.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-fuji.dts
deleted file mode 100644
index af58a73bbc49..000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-fuji.dts
+++ /dev/null
@@ -1,1251 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-// Copyright (c) 2020 Facebook Inc.
-
-/dts-v1/;
-
-#include <dt-bindings/leds/common.h>
-#include "ast2600-facebook-netbmc-common.dtsi"
-
-/ {
-	model = "Facebook Fuji BMC";
-	compatible = "facebook,fuji-bmc", "aspeed,ast2600";
-
-	aliases {
-		/*
-		 * PCA9548 (2-0070) provides 8 channels connecting to
-		 * SCM (System Controller Module).
-		 */
-		i2c16 = &imux16;
-		i2c17 = &imux17;
-		i2c18 = &imux18;
-		i2c19 = &imux19;
-		i2c20 = &imux20;
-		i2c21 = &imux21;
-		i2c22 = &imux22;
-		i2c23 = &imux23;
-
-		/*
-		 * PCA9548 (8-0070) provides 8 channels connecting to
-		 * SMB (Switch Main Board).
-		 */
-		i2c24 = &imux24;
-		i2c25 = &imux25;
-		i2c26 = &imux26;
-		i2c27 = &imux27;
-		i2c28 = &imux28;
-		i2c29 = &imux29;
-		i2c30 = &imux30;
-		i2c31 = &imux31;
-
-		/*
-		 * PCA9548 (11-0077) provides 8 channels connecting to
-		 * SMB (Switch Main Board).
-		 */
-		i2c40 = &imux40;
-		i2c41 = &imux41;
-		i2c42 = &imux42;
-		i2c43 = &imux43;
-		i2c44 = &imux44;
-		i2c45 = &imux45;
-		i2c46 = &imux46;
-		i2c47 = &imux47;
-
-		/*
-		 * PCA9548 (24-0071) provides 8 channels connecting to
-		 * PDB-Left.
-		 */
-		i2c48 = &imux48;
-		i2c49 = &imux49;
-		i2c50 = &imux50;
-		i2c51 = &imux51;
-		i2c52 = &imux52;
-		i2c53 = &imux53;
-		i2c54 = &imux54;
-		i2c55 = &imux55;
-
-		/*
-		 * PCA9548 (25-0072) provides 8 channels connecting to
-		 * PDB-Right.
-		 */
-		i2c56 = &imux56;
-		i2c57 = &imux57;
-		i2c58 = &imux58;
-		i2c59 = &imux59;
-		i2c60 = &imux60;
-		i2c61 = &imux61;
-		i2c62 = &imux62;
-		i2c63 = &imux63;
-
-		/*
-		 * PCA9548 (26-0076) provides 8 channels connecting to
-		 * FCM1.
-		 */
-		i2c64 = &imux64;
-		i2c65 = &imux65;
-		i2c66 = &imux66;
-		i2c67 = &imux67;
-		i2c68 = &imux68;
-		i2c69 = &imux69;
-		i2c70 = &imux70;
-		i2c71 = &imux71;
-
-		/*
-		 * PCA9548 (27-0076) provides 8 channels connecting to
-		 * FCM2.
-		 */
-		i2c72 = &imux72;
-		i2c73 = &imux73;
-		i2c74 = &imux74;
-		i2c75 = &imux75;
-		i2c76 = &imux76;
-		i2c77 = &imux77;
-		i2c78 = &imux78;
-		i2c79 = &imux79;
-
-		/*
-		 * PCA9548 (40-0076) provides 8 channels connecting to
-		 * PIM1.
-		 */
-		i2c80 = &imux80;
-		i2c81 = &imux81;
-		i2c82 = &imux82;
-		i2c83 = &imux83;
-		i2c84 = &imux84;
-		i2c85 = &imux85;
-		i2c86 = &imux86;
-		i2c87 = &imux87;
-
-		/*
-		 * PCA9548 (41-0076) provides 8 channels connecting to
-		 * PIM2.
-		 */
-		i2c88 = &imux88;
-		i2c89 = &imux89;
-		i2c90 = &imux90;
-		i2c91 = &imux91;
-		i2c92 = &imux92;
-		i2c93 = &imux93;
-		i2c94 = &imux94;
-		i2c95 = &imux95;
-
-		/*
-		 * PCA9548 (42-0076) provides 8 channels connecting to
-		 * PIM3.
-		 */
-		i2c96 = &imux96;
-		i2c97 = &imux97;
-		i2c98 = &imux98;
-		i2c99 = &imux99;
-		i2c100 = &imux100;
-		i2c101 = &imux101;
-		i2c102 = &imux102;
-		i2c103 = &imux103;
-
-		/*
-		 * PCA9548 (43-0076) provides 8 channels connecting to
-		 * PIM4.
-		 */
-		i2c104 = &imux104;
-		i2c105 = &imux105;
-		i2c106 = &imux106;
-		i2c107 = &imux107;
-		i2c108 = &imux108;
-		i2c109 = &imux109;
-		i2c110 = &imux110;
-		i2c111 = &imux111;
-
-		/*
-		 * PCA9548 (44-0076) provides 8 channels connecting to
-		 * PIM5.
-		 */
-		i2c112 = &imux112;
-		i2c113 = &imux113;
-		i2c114 = &imux114;
-		i2c115 = &imux115;
-		i2c116 = &imux116;
-		i2c117 = &imux117;
-		i2c118 = &imux118;
-		i2c119 = &imux119;
-
-		/*
-		 * PCA9548 (45-0076) provides 8 channels connecting to
-		 * PIM6.
-		 */
-		i2c120 = &imux120;
-		i2c121 = &imux121;
-		i2c122 = &imux122;
-		i2c123 = &imux123;
-		i2c124 = &imux124;
-		i2c125 = &imux125;
-		i2c126 = &imux126;
-		i2c127 = &imux127;
-
-		/*
-		 * PCA9548 (46-0076) provides 8 channels connecting to
-		 * PIM7.
-		 */
-		i2c128 = &imux128;
-		i2c129 = &imux129;
-		i2c130 = &imux130;
-		i2c131 = &imux131;
-		i2c132 = &imux132;
-		i2c133 = &imux133;
-		i2c134 = &imux134;
-		i2c135 = &imux135;
-
-		/*
-		 * PCA9548 (47-0076) provides 8 channels connecting to
-		 * PIM8.
-		 */
-		i2c136 = &imux136;
-		i2c137 = &imux137;
-		i2c138 = &imux138;
-		i2c139 = &imux139;
-		i2c140 = &imux140;
-		i2c141 = &imux141;
-		i2c142 = &imux142;
-		i2c143 = &imux143;
-	};
-
-	spi_gpio: spi-gpio {
-		num-chipselects = <3>;
-		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>,
-			   <0>,	/* device reg=<1> does not exist */
-			   <&gpio0 ASPEED_GPIO(X, 2) GPIO_ACTIVE_HIGH>;
-
-		eeprom@2 {
-			compatible = "atmel,at93c46d";
-			spi-max-frequency = <250000>;
-			data-size = <16>;
-			spi-cs-high;
-			reg = <2>;
-		};
-	};
-};
-
-&i2c0 {
-	multi-master;
-	bus-frequency = <1000000>;
-};
-
-&i2c2 {
-	/*
-	 * PCA9548 (2-0070) provides 8 channels connecting to SCM (System
-	 * Controller Module).
-	 */
-	i2c-switch@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		i2c-mux-idle-disconnect;
-
-		imux16: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			adm1278@10 {
-				compatible = "adi,adm1278";
-				reg = <0x10>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				shunt-resistor-micro-ohms = <1500>;
-			};
-		};
-
-		imux17: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux18: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux19: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux20: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux21: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux22: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux23: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};
-
-&i2c8 {
-	/*
-	 * PCA9548 (8-0070) provides 8 channels connecting to SMB (Switch
-	 * Main Board).
-	 */
-	i2c-switch@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		i2c-mux-idle-disconnect;
-
-		imux24: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			i2c-switch@71 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x71>;
-				i2c-mux-idle-disconnect;
-
-				imux48: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux49: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux50: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-
-					lp5012@14 {
-						compatible = "ti,lp5012";
-						reg = <0x14>;
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						multi-led@0 {
-							#address-cells = <1>;
-							#size-cells = <0>;
-							reg = <0>;
-							color = <LED_COLOR_ID_MULTI>;
-							function = LED_FUNCTION_ACTIVITY;
-							label = "sys";
-
-							led@0 {
-								reg = <0>;
-								color = <LED_COLOR_ID_RED>;
-							};
-
-							led@1 {
-								reg = <1>;
-								color = <LED_COLOR_ID_BLUE>;
-							};
-
-							led@2 {
-								reg = <2>;
-								color = <LED_COLOR_ID_GREEN>;
-							};
-						};
-
-						multi-led@1 {
-							#address-cells = <1>;
-							#size-cells = <0>;
-							reg = <1>;
-							color = <LED_COLOR_ID_MULTI>;
-							function = LED_FUNCTION_ACTIVITY;
-							label = "fan";
-
-							led@0 {
-								reg = <0>;
-								color = <LED_COLOR_ID_RED>;
-							};
-
-							led@1 {
-								reg = <1>;
-								color = <LED_COLOR_ID_BLUE>;
-							};
-
-							led@2 {
-								reg = <2>;
-								color = <LED_COLOR_ID_GREEN>;
-							};
-						};
-
-						multi-led@2 {
-							#address-cells = <1>;
-							#size-cells = <0>;
-							reg = <2>;
-							color = <LED_COLOR_ID_MULTI>;
-							function = LED_FUNCTION_ACTIVITY;
-							label = "psu";
-
-							led@0 {
-								reg = <0>;
-								color = <LED_COLOR_ID_RED>;
-							};
-
-							led@1 {
-								reg = <1>;
-								color = <LED_COLOR_ID_BLUE>;
-							};
-
-							led@2 {
-								reg = <2>;
-								color = <LED_COLOR_ID_GREEN>;
-							};
-						};
-
-						multi-led@3 {
-							#address-cells = <1>;
-							#size-cells = <0>;
-							reg = <3>;
-							color = <LED_COLOR_ID_MULTI>;
-							function = LED_FUNCTION_ACTIVITY;
-							label = "smb";
-
-							led@0 {
-								reg = <0>;
-								color = <LED_COLOR_ID_RED>;
-							};
-
-							led@1 {
-								reg = <1>;
-								color = <LED_COLOR_ID_BLUE>;
-							};
-
-							led@2 {
-								reg = <2>;
-								color = <LED_COLOR_ID_GREEN>;
-							};
-						};
-					};
-				};
-
-				imux51: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux52: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux53: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux54: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux55: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux25: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			i2c-switch@72 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x72>;
-				i2c-mux-idle-disconnect;
-
-				imux56: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux57: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux58: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux59: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux60: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux61: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux62: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux63: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux26: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-
-			i2c-switch@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux64: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux65: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux66: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux67: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-
-					adm1278@10 {
-						compatible = "adi,adm1278";
-						reg = <0x10>;
-						#address-cells = <1>;
-						#size-cells = <0>;
-						shunt-resistor-micro-ohms = <250>;
-					};
-				};
-
-				imux68: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux69: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux70: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux71: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux27: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-
-			i2c-switch@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux72: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux73: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux74: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux75: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-
-					adm1278@10 {
-						compatible = "adi,adm1278";
-						reg = <0x10>;
-						#address-cells = <1>;
-						#size-cells = <0>;
-						shunt-resistor-micro-ohms = <250>;
-					};
-				};
-
-				imux76: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux77: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux78: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux79: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux28: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux29: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux30: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux31: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-
-	};
-};
-
-&i2c11 {
-	status = "okay";
-
-	/*
-	 * PCA9548 (11-0077) provides 8 channels connecting to SMB (Switch
-	 * Main Board).
-	 */
-	i2c-switch@77 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x77>;
-		i2c-mux-idle-disconnect;
-
-		imux40: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			i2c-switch@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux80: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux81: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux82: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux83: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux84: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux85: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux86: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux87: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux41: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			i2c-switch@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux88: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux89: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux90: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux91: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux92: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux93: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux94: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux95: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux42: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-
-			i2c-switch@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux96: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux97: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux98: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux99: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux100: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux101: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux102: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux103: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux43: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-
-			i2c-switch@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux104: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux105: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux106: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux107: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux108: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux109: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux110: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux111: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux44: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-
-			i2c-switch@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux112: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux113: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux114: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux115: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux116: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux117: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux118: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux119: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux45: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-
-			i2c-switch@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux120: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux121: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux122: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux123: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux124: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux125: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux126: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux127: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux46: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-
-			i2c-switch@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux128: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux129: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux130: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux131: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux132: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux133: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux134: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux135: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux47: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-
-			i2c-switch@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux136: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux137: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux138: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux139: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux140: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux141: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux142: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux143: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-	};
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&mdio1 {
-	status = "okay";
-
-	ethphy3: ethernet-phy@13 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <0x0d>;
-	};
-};
-
-&mac3 {
-	status = "okay";
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy3>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii4_default>;
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts
deleted file mode 100644
index a901c8be49b9..000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts
+++ /dev/null
@@ -1,374 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-// Copyright (c) 2019 Facebook Inc.
-/dts-v1/;
-
-#include <dt-bindings/gpio/aspeed-gpio.h>
-#include "ast2500-facebook-netbmc-common.dtsi"
-
-/ {
-	model = "Facebook Wedge 400 BMC";
-	compatible = "facebook,wedge400-bmc", "aspeed,ast2500";
-
-	aliases {
-		/*
-		 * PCA9548 (2-0070) provides 8 channels connecting to
-		 * SCM (System Controller Module).
-		 */
-		i2c16 = &imux16;
-		i2c17 = &imux17;
-		i2c18 = &imux18;
-		i2c19 = &imux19;
-		i2c20 = &imux20;
-		i2c21 = &imux21;
-		i2c22 = &imux22;
-		i2c23 = &imux23;
-
-		/*
-		 * PCA9548 (8-0070) provides 8 channels connecting to
-		 * SMB (Switch Main Board).
-		 */
-		i2c24 = &imux24;
-		i2c25 = &imux25;
-		i2c26 = &imux26;
-		i2c27 = &imux27;
-		i2c28 = &imux28;
-		i2c29 = &imux29;
-		i2c30 = &imux30;
-		i2c31 = &imux31;
-
-		/*
-		 * PCA9548 (11-0076) provides 8 channels connecting to
-		 * FCM (Fan Controller Module).
-		 */
-		i2c32 = &imux32;
-		i2c33 = &imux33;
-		i2c34 = &imux34;
-		i2c35 = &imux35;
-		i2c36 = &imux36;
-		i2c37 = &imux37;
-		i2c38 = &imux38;
-		i2c39 = &imux39;
-
-		spi2 = &spi_gpio;
-	};
-
-	chosen {
-		stdout-path = &uart1;
-		bootargs = "console=ttyS0,9600n8 root=/dev/ram rw";
-	};
-
-	ast-adc-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>;
-	};
-
-	/*
-	 * GPIO-based SPI Master is required to access SPI TPM, because
-	 * full-duplex SPI transactions are not supported by ASPEED SPI
-	 * Controllers.
-	 */
-	spi_gpio: spi-gpio {
-		status = "okay";
-		compatible = "spi-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cs-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_LOW>;
-		gpio-sck = <&gpio ASPEED_GPIO(R, 3) GPIO_ACTIVE_HIGH>;
-		gpio-mosi = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_HIGH>;
-		gpio-miso = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_HIGH>;
-		num-chipselects = <1>;
-
-		tpmdev@0 {
-			compatible = "tcg,tpm_tis-spi";
-			spi-max-frequency = <33000000>;
-			reg = <0>;
-		};
-	};
-};
-
-/*
- * Both firmware flashes are 128MB on Wedge400 BMC.
- */
-&fmc_flash0 {
-#include "facebook-bmc-flash-layout-128.dtsi"
-};
-
-&fmc_flash1 {
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		flash1@0 {
-			reg = <0x0 0x8000000>;
-			label = "flash1";
-		};
-	};
-};
-
-&uart2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd2_default
-		     &pinctrl_rxd2_default>;
-};
-
-&uart4 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd4_default
-		     &pinctrl_rxd4_default>;
-};
-
-/*
- * I2C bus #0 is multi-master environment dedicated for BMC and Bridge IC
- * communication.
- */
-&i2c0 {
-	status = "okay";
-	multi-master;
-	bus-frequency = <1000000>;
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-
-	i2c-switch@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		i2c-mux-idle-disconnect;
-
-		imux16: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		imux17: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux18: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux19: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux20: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux21: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux22: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux23: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};
-
-&i2c3 {
-	status = "okay";
-};
-
-&i2c4 {
-	status = "okay";
-};
-
-&i2c5 {
-	status = "okay";
-};
-
-&i2c6 {
-	status = "okay";
-};
-
-&i2c7 {
-	status = "okay";
-};
-
-&i2c8 {
-	status = "okay";
-
-	i2c-switch@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		i2c-mux-idle-disconnect;
-
-		imux24: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		imux25: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux26: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux27: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux28: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux29: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux30: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux31: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-
-	};
-};
-
-&i2c9 {
-	status = "okay";
-};
-
-&i2c10 {
-	status = "okay";
-};
-
-&i2c11 {
-	status = "okay";
-
-	i2c-switch@76 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x76>;
-		i2c-mux-idle-disconnect;
-
-		imux32: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		imux33: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux34: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux35: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux36: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux37: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux38: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux39: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-
-	};
-};
-
-&i2c12 {
-	status = "okay";
-};
-
-&i2c13 {
-	status = "okay";
-};
-
-&adc {
-	status = "okay";
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&uhci {
-	status = "okay";
-};
-
-&sdhci1 {
-	/*
-	 * DMA mode needs to be disabled to avoid conflicts with UHCI
-	 * Controller in AST2500 SoC.
-	 */
-	sdhci-caps-mask = <0x0 0x580000>;
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
deleted file mode 100644
index 2efd70666738..000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
+++ /dev/null
@@ -1,4095 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// Copyright 2020 IBM Corp.
-/dts-v1/;
-
-#include "aspeed-g6.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-#include <dt-bindings/i2c/i2c.h>
-#include <dt-bindings/leds/leds-pca955x.h>
-
-/ {
-	model = "Everest";
-	compatible = "ibm,everest-bmc", "aspeed,ast2600";
-
-	aliases {
-		i2c100 = &cfam0_i2c0;
-		i2c101 = &cfam0_i2c1;
-		i2c110 = &cfam0_i2c10;
-		i2c111 = &cfam0_i2c11;
-		i2c112 = &cfam0_i2c12;
-		i2c113 = &cfam0_i2c13;
-		i2c114 = &cfam0_i2c14;
-		i2c115 = &cfam0_i2c15;
-		i2c202 = &cfam1_i2c2;
-		i2c203 = &cfam1_i2c3;
-		i2c210 = &cfam1_i2c10;
-		i2c211 = &cfam1_i2c11;
-		i2c214 = &cfam1_i2c14;
-		i2c215 = &cfam1_i2c15;
-		i2c216 = &cfam1_i2c16;
-		i2c217 = &cfam1_i2c17;
-		i2c300 = &cfam2_i2c0;
-		i2c301 = &cfam2_i2c1;
-		i2c310 = &cfam2_i2c10;
-		i2c311 = &cfam2_i2c11;
-		i2c312 = &cfam2_i2c12;
-		i2c313 = &cfam2_i2c13;
-		i2c314 = &cfam2_i2c14;
-		i2c315 = &cfam2_i2c15;
-		i2c402 = &cfam3_i2c2;
-		i2c403 = &cfam3_i2c3;
-		i2c410 = &cfam3_i2c10;
-		i2c411 = &cfam3_i2c11;
-		i2c414 = &cfam3_i2c14;
-		i2c415 = &cfam3_i2c15;
-		i2c416 = &cfam3_i2c16;
-		i2c417 = &cfam3_i2c17;
-		i2c500 = &cfam4_i2c0;
-		i2c501 = &cfam4_i2c1;
-		i2c510 = &cfam4_i2c10;
-		i2c511 = &cfam4_i2c11;
-		i2c512 = &cfam4_i2c12;
-		i2c513 = &cfam4_i2c13;
-		i2c514 = &cfam4_i2c14;
-		i2c515 = &cfam4_i2c15;
-		i2c602 = &cfam5_i2c2;
-		i2c603 = &cfam5_i2c3;
-		i2c610 = &cfam5_i2c10;
-		i2c611 = &cfam5_i2c11;
-		i2c614 = &cfam5_i2c14;
-		i2c615 = &cfam5_i2c15;
-		i2c616 = &cfam5_i2c16;
-		i2c617 = &cfam5_i2c17;
-		i2c700 = &cfam6_i2c0;
-		i2c701 = &cfam6_i2c1;
-		i2c710 = &cfam6_i2c10;
-		i2c711 = &cfam6_i2c11;
-		i2c712 = &cfam6_i2c12;
-		i2c713 = &cfam6_i2c13;
-		i2c714 = &cfam6_i2c14;
-		i2c715 = &cfam6_i2c15;
-		i2c802 = &cfam7_i2c2;
-		i2c803 = &cfam7_i2c3;
-		i2c810 = &cfam7_i2c10;
-		i2c811 = &cfam7_i2c11;
-		i2c814 = &cfam7_i2c14;
-		i2c815 = &cfam7_i2c15;
-		i2c816 = &cfam7_i2c16;
-		i2c817 = &cfam7_i2c17;
-
-		i2c16 = &i2c4mux0chn0;
-		i2c17 = &i2c4mux0chn1;
-		i2c18 = &i2c4mux0chn2;
-		i2c19 = &i2c5mux0chn0;
-		i2c20 = &i2c5mux0chn1;
-		i2c21 = &i2c5mux0chn2;
-		i2c22 = &i2c5mux0chn3;
-		i2c23 = &i2c6mux0chn0;
-		i2c24 = &i2c6mux0chn1;
-		i2c25 = &i2c6mux0chn2;
-		i2c26 = &i2c6mux0chn3;
-		i2c27 = &i2c14mux0chn0;
-		i2c28 = &i2c14mux0chn1;
-		i2c29 = &i2c14mux0chn2;
-		i2c30 = &i2c14mux0chn3;
-		i2c31 = &i2c14mux1chn0;
-		i2c32 = &i2c14mux1chn1;
-		i2c33 = &i2c14mux1chn2;
-		i2c34 = &i2c14mux1chn3;
-
-		serial4 = &uart5;
-
-		spi10 = &cfam0_spi0;
-		spi11 = &cfam0_spi1;
-		spi12 = &cfam0_spi2;
-		spi13 = &cfam0_spi3;
-		spi20 = &cfam1_spi0;
-		spi21 = &cfam1_spi1;
-		spi22 = &cfam1_spi2;
-		spi23 = &cfam1_spi3;
-		spi30 = &cfam2_spi0;
-		spi31 = &cfam2_spi1;
-		spi32 = &cfam2_spi2;
-		spi33 = &cfam2_spi3;
-		spi40 = &cfam3_spi0;
-		spi41 = &cfam3_spi1;
-		spi42 = &cfam3_spi2;
-		spi43 = &cfam3_spi3;
-		spi50 = &cfam4_spi0;
-		spi51 = &cfam4_spi1;
-		spi52 = &cfam4_spi2;
-		spi53 = &cfam4_spi3;
-		spi60 = &cfam5_spi0;
-		spi61 = &cfam5_spi1;
-		spi62 = &cfam5_spi2;
-		spi63 = &cfam5_spi3;
-		spi70 = &cfam6_spi0;
-		spi71 = &cfam6_spi1;
-		spi72 = &cfam6_spi2;
-		spi73 = &cfam6_spi3;
-		spi80 = &cfam7_spi0;
-		spi81 = &cfam7_spi1;
-		spi82 = &cfam7_spi2;
-		spi83 = &cfam7_spi3;
-	};
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200n8";
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/* LPC FW cycle bridge region requires natural alignment */
-		flash_memory: region@b8000000 {
-			no-map;
-			reg = <0xb8000000 0x04000000>; /* 64M */
-		};
-
-		/* 48MB region from the end of flash to start of vga memory */
-		ramoops@bc000000 {
-			compatible = "ramoops";
-			reg = <0xbc000000 0x180000>; /* 16 * (3 * 0x8000) */
-			record-size = <0x8000>;
-			console-size = <0x8000>;
-			pmsg-size = <0x8000>;
-			max-reason = <3>; /* KMSG_DUMP_EMERG */
-		};
-
-		/* VGA region is dictated by hardware strapping */
-		vga_memory: region@bf000000 {
-			no-map;
-			compatible = "shared-dma-pool";
-			reg = <0xbf000000 0x01000000>; /* 16M */
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <1000>;
-
-		fan0-presence {
-			label = "fan0-presence";
-			gpios = <&pca0 15 GPIO_ACTIVE_LOW>;
-			linux,code = <15>;
-		};
-
-		fan1-presence {
-			label = "fan1-presence";
-			gpios = <&pca0 14 GPIO_ACTIVE_LOW>;
-			linux,code = <14>;
-		};
-
-		fan2-presence {
-			label = "fan2-presence";
-			gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
-			linux,code = <13>;
-		};
-
-		fan3-presence {
-			label = "fan3-presence";
-			gpios = <&pca0 12 GPIO_ACTIVE_LOW>;
-			linux,code = <12>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		/* RTC battery fault LED at the back */
-		led-rtc-battery {
-			gpios = <&gpio0 ASPEED_GPIO(H, 0) GPIO_ACTIVE_LOW>;
-		};
-
-		/* BMC Card fault LED at the back */
-		led-bmc {
-			gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
-		};
-
-		/* Enclosure Identify LED at the back */
-		led-rear-enc-id0 {
-			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
-		};
-
-		/* Enclosure fault LED at the back */
-		led-rear-enc-fault0 {
-			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
-		};
-
-		/* PCIE slot power LED */
-		led-pcieslot-power {
-			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&gpio0 {
-	gpio-line-names =
-	/*A0-A7*/	"","","","","","","","",
-	/*B0-B7*/	"USERSPACE_RSTIND_BUFF","","","","","","","",
-	/*C0-C7*/	"","","","","","","","",
-	/*D0-D7*/	"","","","","","","","",
-	/*E0-E7*/	"","","","","","","","",
-	/*F0-F7*/	"PIN_HOLE_RESET_IN_N","","",
-				"PIN_HOLE_RESET_OUT_N","","","","",
-	/*G0-G7*/	"","","","","","","","",
-	/*H0-H7*/	"led-rtc-battery","led-bmc","led-rear-enc-id0","led-rear-enc-fault0","","","","",
-	/*I0-I7*/	"","","","","","","","",
-	/*J0-J7*/	"","","","","","","","",
-	/*K0-K7*/	"","","","","","","","",
-	/*L0-L7*/	"","","","","","","","",
-	/*M0-M7*/	"","","","","","","","",
-	/*N0-N7*/	"","","","","","","","",
-	/*O0-O7*/	"","","","","","","","",
-	/*P0-P7*/	"","","","","led-pcieslot-power","","","",
-	/*Q0-Q7*/	"","","","","","","","",
-	/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","","I2C_FLASH_MICRO_N","","",
-	/*S0-S7*/	"","","","","","","","",
-	/*T0-T7*/	"","","","","","","","",
-	/*U0-U7*/	"","","","","","","","",
-	/*V0-V7*/	"","BMC_3RESTART_ATTEMPT_P","","","","","","",
-	/*W0-W7*/	"","","","","","","","",
-	/*X0-X7*/	"","","","","","","","",
-	/*Y0-Y7*/	"","","","","","","","",
-	/*Z0-Z7*/   "","","","","","","","";
-};
-
-&i2c0 {
-	status = "okay";
-
-	eeprom@51 {
-		compatible = "atmel,24c64";
-		reg = <0x51>;
-	};
-
-	pca1: pca9552@62 {
-		compatible = "nxp,pca9552";
-		reg = <0x62>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names =
-			"presence-ps0",
-			"presence-ps1",
-			"presence-ps2",
-			"presence-ps3",
-			"presence-pdb",
-			"presence-tpm",
-			"", "",
-			"presence-cp0",
-			"presence-cp1",
-			"presence-cp2",
-			"presence-cp3",
-			"presence-dasd",
-			"presence-lcd-op",
-			"presence-base-op",
-			"";
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@8 {
-			reg = <8>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@9 {
-			reg = <9>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@10 {
-			reg = <10>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@11 {
-			reg = <11>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@12 {
-			reg = <12>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@13 {
-			reg = <13>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@14 {
-			reg = <14>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@15 {
-			reg = <15>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-	};
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-
-	eeprom@54 {
-		compatible = "atmel,24c128";
-		reg = <0x54>;
-	};
-
-	power-supply@68 {
-		compatible = "ibm,cffps";
-		reg = <0x68>;
-	};
-
-	power-supply@69 {
-		compatible = "ibm,cffps";
-		reg = <0x69>;
-	};
-
-	power-supply@6b {
-		compatible = "ibm,cffps";
-		reg = <0x6b>;
-	};
-
-	power-supply@6d {
-		compatible = "ibm,cffps";
-		reg = <0x6d>;
-	};
-};
-
-&i2c4 {
-	status = "okay";
-
-	pca2: pca9552@65 {
-		compatible = "nxp,pca9552";
-		reg = <0x65>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names =
-			"presence-cable-card1",
-			"presence-cable-card2",
-			"presence-cable-card3",
-			"presence-cable-card4",
-			"presence-cable-card5",
-			"expander-cable-card1",
-			"expander-cable-card2",
-			"expander-cable-card3",
-			"expander-cable-card4",
-			"expander-cable-card5";
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@8 {
-			reg = <8>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@9 {
-			reg = <9>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-	};
-
-	i2c-switch@70 {
-		compatible = "nxp,pca9546";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-		i2c-mux-idle-disconnect;
-
-		i2c4mux0chn0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-			eeprom@52 {
-				compatible = "atmel,24c64";
-				reg = <0x52>;
-			};
-
-			pca_cable_card_c01: pca9551@62 {
-				compatible = "nxp,pca9551";
-				reg = <0x62>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				led@0 {
-					label = "cablecard-c01-cxp-top";
-					reg = <0>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@1 {
-					label = "cablecard-c01-cxp-bot";
-					reg = <1>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				gpio@2 {
-					reg = <2>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@3 {
-					reg = <3>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@4 {
-					reg = <4>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@5 {
-					reg = <5>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@6 {
-					reg = <6>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@7 {
-					reg = <7>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-			};
-		};
-
-		i2c4mux0chn1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-			};
-
-			pca_cable_card_c02: pca9551@60 {
-				compatible = "nxp,pca9551";
-				reg = <0x60>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				led@0 {
-					label = "cablecard-c02-cxp-top";
-					reg = <0>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@1 {
-					label = "cablecard-c02-cxp-bot";
-					reg = <1>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				gpio@2 {
-					reg = <2>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@3 {
-					reg = <3>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@4 {
-					reg = <4>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@5 {
-					reg = <5>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@6 {
-					reg = <6>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@7 {
-					reg = <7>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-			};
-		};
-
-		i2c4mux0chn2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-			eeprom@51 {
-				compatible = "atmel,24c64";
-				reg = <0x51>;
-			};
-
-			pca_cable_card_c03: pca9551@61 {
-				compatible = "nxp,pca9551";
-				reg = <0x61>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				led@0 {
-					label = "cablecard-c03-cxp-top";
-					reg = <0>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@1 {
-					label = "cablecard-c03-cxp-bot";
-					reg = <1>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				gpio@2 {
-					reg = <2>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@3 {
-					reg = <3>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@4 {
-					reg = <4>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@5 {
-					reg = <5>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@6 {
-					reg = <6>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@7 {
-					reg = <7>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-			};
-		};
-	};
-};
-
-&i2c5 {
-	status = "okay";
-
-	pca3: pca9552@66 {
-		compatible = "nxp,pca9552";
-		reg = <0x66>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names =
-			"presence-cable-card6",
-			"presence-cable-card7",
-			"presence-cable-card8",
-			"presence-cable-card9",
-			"presence-cable-card10",
-			"presence-cable-card11",
-			"expander-cable-card6",
-			"expander-cable-card7",
-			"expander-cable-card8",
-			"expander-cable-card9",
-			"expander-cable-card10",
-			"expander-cable-card11";
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@8 {
-			reg = <8>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@9 {
-			reg = <9>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@10 {
-			reg = <10>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@11 {
-			reg = <11>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-	};
-
-	i2c-switch@70 {
-		compatible = "nxp,pca9546";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-		i2c-mux-idle-disconnect;
-
-		i2c5mux0chn0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-			};
-
-			pca_cable_card_c04: pca9551@60 {
-				compatible = "nxp,pca9551";
-				reg = <0x60>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				led@0 {
-					label = "cablecard-c04-cxp-top";
-					reg = <0>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@1 {
-					label = "cablecard-c04-cxp-bot";
-					reg = <1>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				gpio@2 {
-					reg = <2>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@3 {
-					reg = <3>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@4 {
-					reg = <4>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@5 {
-					reg = <5>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@6 {
-					reg = <6>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@7 {
-					reg = <7>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-			};
-		};
-
-		i2c5mux0chn1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-			eeprom@51 {
-				compatible = "atmel,24c64";
-				reg = <0x51>;
-			};
-
-			pca_cable_card_c05: pca9551@61 {
-				compatible = "nxp,pca9551";
-				reg = <0x61>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				led@0 {
-					label = "cablecard-c05-cxp-top";
-					reg = <0>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@1 {
-					label = "cablecard-c05-cxp-bot";
-					reg = <1>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				gpio@2 {
-					reg = <2>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@3 {
-					reg = <3>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@4 {
-					reg = <4>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@5 {
-					reg = <5>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@6 {
-					reg = <6>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@7 {
-					reg = <7>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-			};
-		};
-
-		i2c5mux0chn2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-			eeprom@52 {
-				compatible = "atmel,24c64";
-				reg = <0x52>;
-			};
-
-			pca_cable_card_c06: pca9551@62 {
-				compatible = "nxp,pca9551";
-				reg = <0x62>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				led@0 {
-					label = "cablecard-c06-cxp-top";
-					reg = <0>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@1 {
-					label = "cablecard-c06-cxp-bot";
-					reg = <1>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				gpio@2 {
-					reg = <2>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@3 {
-					reg = <3>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@4 {
-					reg = <4>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@5 {
-					reg = <5>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@6 {
-					reg = <6>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@7 {
-					reg = <7>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-			};
-		};
-
-		i2c5mux0chn3: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-			eeprom@53 {
-				compatible = "atmel,24c64";
-				reg = <0x53>;
-			};
-
-			pca_cable_card_c07: pca9551@63 {
-				compatible = "nxp,pca9551";
-				reg = <0x63>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				led@0 {
-					label = "cablecard-c07-cxp-top";
-					reg = <0>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@1 {
-					label = "cablecard-c07-cxp-bot";
-					reg = <1>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				gpio@2 {
-					reg = <2>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@3 {
-					reg = <3>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@4 {
-					reg = <4>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@5 {
-					reg = <5>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@6 {
-					reg = <6>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@7 {
-					reg = <7>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-			};
-		};
-	};
-};
-
-&i2c6 {
-	status = "okay";
-
-	i2c-switch@70 {
-		compatible = "nxp,pca9546";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-		i2c-mux-idle-disconnect;
-
-		i2c6mux0chn0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-			eeprom@50 {
-			compatible = "atmel,24c64";
-			reg = <0x50>;
-			};
-
-			pca_cable_card_c08: pca9551@60 {
-				compatible = "nxp,pca9551";
-				reg = <0x60>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				led@0 {
-					label = "cablecard-c08-cxp-top";
-					reg = <0>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@1 {
-					label = "cablecard-c08-cxp-bot";
-					reg = <1>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				gpio@2 {
-					reg = <2>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@3 {
-					reg = <3>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@4 {
-					reg = <4>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@5 {
-					reg = <5>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@6 {
-					reg = <6>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@7 {
-					reg = <7>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-			};
-		};
-
-		i2c6mux0chn1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-			eeprom@52 {
-				compatible = "atmel,24c64";
-				reg = <0x52>;
-			};
-
-			pca_cable_card_c09: pca9551@62 {
-				compatible = "nxp,pca9551";
-				reg = <0x62>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				led@0 {
-					label = "cablecard-c09-cxp-top";
-					reg = <0>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@1 {
-					label = "cablecard-c09-cxp-bot";
-					reg = <1>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				gpio@2 {
-					reg = <2>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@3 {
-					reg = <3>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@4 {
-					reg = <4>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@5 {
-					reg = <5>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@6 {
-					reg = <6>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@7 {
-					reg = <7>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-			};
-		};
-
-		i2c6mux0chn2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-			eeprom@53 {
-				compatible = "atmel,24c64";
-				reg = <0x53>;
-			};
-
-			pca_cable_card_c10: pca9551@63 {
-				compatible = "nxp,pca9551";
-				reg = <0x63>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				led@0 {
-					label = "cablecard-c10-cxp-top";
-					reg = <0>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@1 {
-					label = "cablecard-c10-cxp-bot";
-					reg = <1>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				gpio@2 {
-					reg = <2>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@3 {
-					reg = <3>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@4 {
-					reg = <4>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@5 {
-					reg = <5>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@6 {
-					reg = <6>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@7 {
-					reg = <7>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-			};
-		};
-
-		i2c6mux0chn3: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-			eeprom@51 {
-				compatible = "atmel,24c64";
-				reg = <0x51>;
-			};
-
-			pca_cable_card_c11: pca9551@61 {
-				compatible = "nxp,pca9551";
-				reg = <0x61>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				led@0 {
-					label = "cablecard-c11-cxp-top";
-					reg = <0>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@1 {
-					label = "cablecard-c11-cxp-bot";
-					reg = <1>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				gpio@2 {
-					reg = <2>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@3 {
-					reg = <3>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@4 {
-					reg = <4>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@5 {
-					reg = <5>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@6 {
-					reg = <6>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@7 {
-					reg = <7>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-			};
-		};
-	};
-
-	pca_pcie_slot: pca9552@65 {
-		compatible = "nxp,pca9552";
-		reg = <0x65>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		led@1 {
-			label = "pcieslot-c01";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@2 {
-			label = "pcieslot-c02";
-			reg = <2>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@3 {
-			label = "pcieslot-c03";
-			reg = <3>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@4 {
-			label = "pcieslot-c04";
-			reg = <4>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@5 {
-			label = "pcieslot-c05";
-			reg = <5>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@6 {
-			label = "pcieslot-c06";
-			reg = <6>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@7 {
-			label = "pcieslot-c07";
-			reg = <7>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@8 {
-			label = "pcieslot-c08";
-			reg = <8>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@9 {
-			label = "pcieslot-c09";
-			reg = <9>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@10 {
-			label = "pcieslot-c10";
-			reg = <10>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@11 {
-			label = "pcieslot-c11";
-			reg = <11>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		gpio@12 {
-			reg = <12>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@13 {
-			reg = <13>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@14 {
-			reg = <14>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@15 {
-			reg = <15>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-	};
-};
-
-&i2c7 {
-	status = "okay";
-
-	pic0_dimm: pca9552@31 {
-		compatible = "ibm,pca9552";
-		reg = <0x31>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "ddimm0";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "ddimm1";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@2 {
-			label = "ddimm2";
-			reg = <2>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@3 {
-			label = "ddimm3";
-			reg = <3>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@4 {
-			label = "ddimm4";
-			reg = <4>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@5 {
-			label = "ddimm5";
-			reg = <5>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@6 {
-			label = "ddimm6";
-			reg = <6>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@7 {
-			label = "ddimm7";
-			reg = <7>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@8 {
-			label = "ddimm8";
-			reg = <8>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@9 {
-			label = "ddimm9";
-			reg = <9>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@10 {
-			label = "ddimm10";
-			reg = <10>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@11 {
-			label = "ddimm11";
-			reg = <11>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@12 {
-			label = "ddimm12";
-			reg = <12>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@13 {
-			label = "ddimm13";
-			reg = <13>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@14 {
-			label = "ddimm14";
-			reg = <14>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@15 {
-			label = "ddimm15";
-			reg = <15>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-
-	pic1_dimm: pca9552@32 {
-		compatible = "ibm,pca9552";
-		reg = <0x32>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "ddimm16";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "ddimm17";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@2 {
-			label = "ddimm18";
-			reg = <2>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@3 {
-			label = "ddimm19";
-			reg = <3>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@4 {
-			label = "ddimm20";
-			reg = <4>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@5 {
-			label = "ddimm21";
-			reg = <5>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@6 {
-			label = "ddimm22";
-			reg = <6>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@7 {
-			label = "ddimm23";
-			reg = <7>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@8 {
-			label = "ddimm24";
-			reg = <8>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@9 {
-			label = "ddimm25";
-			reg = <9>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@10 {
-			label = "ddimm26";
-			reg = <10>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@11 {
-			label = "ddimm27";
-			reg = <11>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@12 {
-			label = "ddimm28";
-			reg = <12>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@13 {
-			label = "ddimm29";
-			reg = <13>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@14 {
-			label = "ddimm30";
-			reg = <14>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@15 {
-			label = "ddimm31";
-			reg = <15>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-
-	pic2_dimm: pca9552@33 {
-		compatible = "ibm,pca9552";
-		reg = <0x33>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "ddimm32";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "ddimm33";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@2 {
-			label = "ddimm34";
-			reg = <2>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@3 {
-			label = "ddimm35";
-			reg = <3>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@4 {
-			label = "ddimm36";
-			reg = <4>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@5 {
-			label = "ddimm37";
-			reg = <5>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@6 {
-			label = "ddimm38";
-			reg = <6>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@7 {
-			label = "ddimm39";
-			reg = <7>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@8 {
-			label = "ddimm40";
-			reg = <8>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@9 {
-			label = "ddimm41";
-			reg = <9>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@10 {
-			label = "ddimm42";
-			reg = <10>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@11 {
-			label = "ddimm43";
-			reg = <11>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@12 {
-			label = "ddimm44";
-			reg = <12>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@13 {
-			label = "ddimm45";
-			reg = <13>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@14 {
-			label = "ddimm46";
-			reg = <14>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@15 {
-			label = "ddimm47";
-			reg = <15>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-
-	pic3_dimm: pca9552@30 {
-		compatible = "ibm,pca9552";
-		reg = <0x30>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "ddimm48";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "ddimm49";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@2 {
-			label = "ddimm50";
-			reg = <2>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@3 {
-			label = "ddimm51";
-			reg = <3>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@4 {
-			label = "ddimm52";
-			reg = <4>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@5 {
-			label = "ddimm53";
-			reg = <5>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@6 {
-			label = "ddimm54";
-			reg = <6>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@7 {
-			label = "ddimm55";
-			reg = <7>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@8 {
-			label = "ddimm56";
-			reg = <8>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@9 {
-			label = "ddimm57";
-			reg = <9>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@10 {
-			label = "ddimm58";
-			reg = <10>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@11 {
-			label = "ddimm59";
-			reg = <11>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@12 {
-			label = "ddimm60";
-			reg = <12>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@13 {
-			label = "ddimm61";
-			reg = <13>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@14 {
-			label = "ddimm62";
-			reg = <14>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@15 {
-			label = "ddimm63";
-			reg = <15>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-
-	pic0_vrm_misc: pca9552@34 {
-		compatible = "ibm,pca9552";
-		reg = <0x34>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "planar";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "tpm";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@2 {
-			label = "cpu3-c61";
-			reg = <2>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@3 {
-			label = "cpu0-c14";
-			reg = <3>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@4 {
-			label = "opencapi-connector3";
-			reg = <4>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@5 {
-			label = "opencapi-connector4";
-			reg = <5>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@6 {
-			label = "opencapi-connector5";
-			reg = <6>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		led@8 {
-			label = "vrm4";
-			reg = <8>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@9 {
-			label = "vrm5";
-			reg = <9>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@10 {
-			label = "vrm6";
-			reg = <10>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@11 {
-			label = "vrm7";
-			reg = <11>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@12 {
-			label = "vrm12";
-			reg = <12>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@13 {
-			label = "vrm13";
-			reg = <13>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@14 {
-			label = "vrm14";
-			reg = <14>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@15 {
-			label = "vrm15";
-			reg = <15>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-
-	pic1_vrm_misc: pca9552@35 {
-		compatible = "ibm,pca9552";
-		reg = <0x35>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		led@0 {
-			label = "dasd-backplane";
-			reg = <0>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@1 {
-			label = "power-distribution";
-			reg = <1>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@2 {
-			label = "cpu1-c19";
-			reg = <2>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@3 {
-			label = "cpu2-c56";
-			reg = <3>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@4 {
-			label = "opencapi-connector0";
-			reg = <4>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@5 {
-			label = "opencapi-connector1";
-			reg = <5>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@6 {
-			label = "opencapi-connector2";
-			reg = <6>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		led@8 {
-			label = "vrm0";
-			reg = <8>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@9 {
-			label = "vrm1";
-			reg = <9>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@10 {
-			label = "vrm2";
-			reg = <10>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@11 {
-			label = "vrm3";
-			reg = <11>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@12 {
-			label = "vrm8";
-			reg = <12>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@13 {
-			label = "vrm9";
-			reg = <13>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@14 {
-			label = "vrm10";
-			reg = <14>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-
-		led@15 {
-			label = "vrm11";
-			reg = <15>;
-			retain-state-shutdown;
-			default-state = "keep";
-			type = <PCA955X_TYPE_LED>;
-		};
-	};
-};
-
-&i2c8 {
-	status = "okay";
-
-	ucd90320@11 {
-		compatible = "ti,ucd90320";
-		reg = <0x11>;
-	};
-
-	rtc@32 {
-		compatible = "epson,rx8900";
-		reg = <0x32>;
-	};
-
-	eeprom@51 {
-		compatible = "atmel,24c64";
-		reg = <0x51>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c128";
-		reg = <0x50>;
-	};
-};
-
-&i2c9 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c128";
-		reg = <0x50>;
-	};
-
-	eeprom@51 {
-		compatible = "atmel,24c128";
-		reg = <0x51>;
-	};
-
-	eeprom@53 {
-		compatible = "atmel,24c128";
-		reg = <0x53>;
-	};
-
-	eeprom@52 {
-		compatible = "atmel,24c128";
-		reg = <0x52>;
-	};
-};
-
-&i2c10 {
-	status = "okay";
-
-	eeprom@51 {
-		compatible = "atmel,24c128";
-		reg = <0x51>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c128";
-		reg = <0x50>;
-	};
-
-	eeprom@53 {
-		compatible = "atmel,24c128";
-		reg = <0x53>;
-	};
-
-	eeprom@52 {
-		compatible = "atmel,24c128";
-		reg = <0x52>;
-	};
-};
-
-&i2c11 {
-	status = "okay";
-
-	eeprom@51 {
-		compatible = "atmel,24c128";
-		reg = <0x51>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c128";
-		reg = <0x50>;
-	};
-
-	eeprom@53 {
-		compatible = "atmel,24c128";
-		reg = <0x53>;
-	};
-
-	eeprom@52 {
-		compatible = "atmel,24c128";
-		reg = <0x52>;
-	};
-};
-
-&i2c12 {
-	status = "okay";
-};
-
-&i2c13 {
-	status = "okay";
-
-	eeprom@51 {
-		compatible = "atmel,24c128";
-		reg = <0x51>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c128";
-		reg = <0x50>;
-	};
-
-	eeprom@53 {
-		compatible = "atmel,24c128";
-		reg = <0x53>;
-	};
-
-	eeprom@52 {
-		compatible = "atmel,24c128";
-		reg = <0x52>;
-	};
-};
-
-&i2c14 {
-	status = "okay";
-
-	i2c-switch@70 {
-		compatible = "nxp,pca9546";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-		i2c-mux-idle-disconnect;
-
-		i2c14mux0chn0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-			};
-		};
-
-		i2c14mux0chn1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-			eeprom@51 {
-				compatible = "atmel,24c32";
-				reg = <0x51>;
-			};
-		};
-
-		i2c14mux0chn2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-			eeprom@50 {
-				compatible = "atmel,24c32";
-				reg = <0x50>;
-			};
-
-			pca_oppanel: pca9551@60 {
-				compatible = "nxp,pca9551";
-				reg = <0x60>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				led@0 {
-					label = "front-sys-id0";
-					reg = <0>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@1 {
-					label = "front-check-log0";
-					reg = <1>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@2 {
-					label = "front-enc-fault1";
-					reg = <2>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@3 {
-					label = "front-sys-pwron0";
-					reg = <3>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-			};
-		};
-
-		i2c14mux0chn3: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-
-			max31785@52 {
-				compatible = "maxim,max31785a";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x52>;
-
-				fan@0 {
-					compatible = "pmbus-fan";
-					reg = <0>;
-					tach-pulses = <2>;
-				};
-
-				fan@1 {
-					compatible = "pmbus-fan";
-					reg = <1>;
-					tach-pulses = <2>;
-				};
-
-				fan@2 {
-					compatible = "pmbus-fan";
-					reg = <2>;
-					tach-pulses = <2>;
-				};
-
-				fan@3 {
-					compatible = "pmbus-fan";
-					reg = <3>;
-					tach-pulses = <2>;
-				};
-			};
-
-			pca_fan_nvme: pca9552@60 {
-				compatible = "nxp,pca9552";
-				reg = <0x60>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				led@0 {
-					label = "nvme0";
-					reg = <0>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@1 {
-					label = "nvme1";
-					reg = <1>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@2 {
-					label = "nvme2";
-					reg = <2>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@3 {
-					label = "nvme3";
-					reg = <3>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@4 {
-					label = "nvme4";
-					reg = <4>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@5 {
-					label = "nvme5";
-					reg = <5>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@6 {
-					label = "nvme6";
-					reg = <6>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@7 {
-					label = "nvme7";
-					reg = <7>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@8 {
-					label = "nvme8";
-					reg = <8>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@9 {
-					label = "nvme9";
-					reg = <9>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@10 {
-					label = "fan0";
-					reg = <10>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@11 {
-					label = "fan1";
-					reg = <11>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@12 {
-					label = "fan2";
-					reg = <12>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				led@13 {
-					label = "fan3";
-					reg = <13>;
-					retain-state-shutdown;
-					default-state = "keep";
-					type = <PCA955X_TYPE_LED>;
-				};
-
-				gpio@14 {
-					reg = <14>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@15 {
-					reg = <15>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-			};
-
-			pca0: pca9552@61 {
-				compatible = "nxp,pca9552";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x61>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				gpio-line-names =
-					"","","","",
-					"","","","",
-					"","","","",
-					"presence-fan3",
-					"presence-fan2",
-					"presence-fan1",
-					"presence-fan0";
-
-				gpio@0 {
-					reg = <0>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@1 {
-					reg = <1>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@2 {
-					reg = <2>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@3 {
-					reg = <3>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@4 {
-					reg = <4>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@5 {
-					reg = <5>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@6 {
-					reg = <6>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@7 {
-					reg = <7>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@8 {
-					reg = <8>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@9 {
-					reg = <9>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@10 {
-					reg = <10>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@11 {
-					reg = <11>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@12 {
-					reg = <12>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@13 {
-					reg = <13>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@14 {
-					reg = <14>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-
-				gpio@15 {
-					reg = <15>;
-					type = <PCA955X_TYPE_GPIO>;
-				};
-			};
-		};
-	};
-
-	i2c-switch@71 {
-		compatible = "nxp,pca9546";
-		reg = <0x71>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-		i2c-mux-idle-disconnect;
-
-		i2c14mux1chn0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-			eeprom@50 {
-				compatible = "atmel,24c32";
-				reg = <0x50>;
-			};
-		};
-
-		i2c14mux1chn1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-			eeprom@50 {
-				compatible = "atmel,24c32";
-				reg = <0x50>;
-			};
-		};
-
-		i2c14mux1chn2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-			eeprom@50 {
-				compatible = "atmel,24c32";
-				reg = <0x50>;
-			};
-		};
-
-		i2c14mux1chn3: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-			eeprom@50 {
-				compatible = "atmel,24c32";
-				reg = <0x50>;
-			};
-		};
-	};
-};
-
-&i2c15 {
-	status = "okay";
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&emmc_controller {
-	status = "okay";
-};
-
-&pinctrl_emmc_default {
-	bias-disable;
-};
-
-&emmc {
-	status = "okay";
-	clk-phase-mmc-hs200 = <210>, <228>;
-};
-
-&fsim0 {
-	status = "okay";
-
-	#address-cells = <2>;
-	#size-cells = <0>;
-
-	/*
-	 * CFAM Reset is supposed to be active low but pass1 hardware is wired
-	 * active high.
-	 */
-	cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>;
-
-	cfam@0,0 {	/* DCM0_C0 */
-		reg = <0 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		chip-id = <0>;
-
-		scom@1000 {
-			compatible = "ibm,fsi2pib";
-			reg = <0x1000 0x400>;
-		};
-
-		i2c@1800 {
-			compatible = "ibm,fsi-i2c-master";
-			reg = <0x1800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam0_i2c0: i2c-bus@0 {
-				reg = <0>;	/* OMI01 */
-			};
-
-			cfam0_i2c1: i2c-bus@1 {
-				reg = <1>;	/* OMI23 */
-			};
-
-			cfam0_i2c10: i2c-bus@a {
-				reg = <10>;	/* OP3A */
-			};
-
-			cfam0_i2c11: i2c-bus@b {
-				reg = <11>;	/* OP3B */
-			};
-
-			cfam0_i2c12: i2c-bus@c {
-				reg = <12>;	/* OP4A */
-			};
-
-			cfam0_i2c13: i2c-bus@d {
-				reg = <13>;	/* OP4B */
-			};
-
-			cfam0_i2c14: i2c-bus@e {
-				reg = <14>;	/* OP5A */
-			};
-
-			cfam0_i2c15: i2c-bus@f {
-				reg = <15>;	/* OP5B */
-			};
-		};
-
-		fsi2spi@1c00 {
-			compatible = "ibm,fsi2spi";
-			reg = <0x1c00 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam0_spi0: spi@0 {
-				reg = <0x0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam0_spi1: spi@20 {
-				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam0_spi2: spi@40 {
-				reg = <0x40>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam0_spi3: spi@60 {
-				reg = <0x60>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-		};
-
-		sbefifo@2400 {
-			compatible = "ibm,p9-sbefifo";
-			reg = <0x2400 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			fsi_occ0: occ {
-				compatible = "ibm,p10-occ";
-			};
-		};
-
-		fsi_hub0: hub@3400 {
-			compatible = "fsi-master-hub";
-			reg = <0x3400 0x400>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-		};
-	};
-};
-
-&fsi_hub0 {
-	cfam@1,0 { /* DCM0_C1 */
-		reg = <1 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		chip-id = <1>;
-
-		scom@1000 {
-			compatible = "ibm,fsi2pib";
-			reg = <0x1000 0x400>;
-		};
-
-		i2c@1800 {
-			compatible = "ibm,fsi-i2c-master";
-			reg = <0x1800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam1_i2c2: i2c-bus@2 {
-				reg = <2>;	/* OMI45 */
-			};
-
-			cfam1_i2c3: i2c-bus@3 {
-				reg = <3>;	/* OMI67 */
-			};
-
-			cfam1_i2c10: i2c-bus@a {
-				reg = <10>;	/* OP3A */
-			};
-
-			cfam1_i2c11: i2c-bus@b {
-				reg = <11>;	/* OP3B */
-			};
-
-			cfam1_i2c14: i2c-bus@e {
-				reg = <14>;	/* OP5A */
-			};
-
-			cfam1_i2c15: i2c-bus@f {
-				reg = <15>;	/* OP5B */
-			};
-
-			cfam1_i2c16: i2c-bus@10 {
-				reg = <16>;	/* OP6A */
-			};
-
-			cfam1_i2c17: i2c-bus@11 {
-				reg = <17>;	/* OP6B */
-			};
-		};
-
-		fsi2spi@1c00 {
-			compatible = "ibm,fsi2spi";
-			reg = <0x1c00 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam1_spi0: spi@0 {
-				reg = <0x0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam1_spi1: spi@20 {
-				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam1_spi2: spi@40 {
-				reg = <0x40>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam1_spi3: spi@60 {
-				reg = <0x60>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-		};
-
-		sbefifo@2400 {
-			compatible = "ibm,p9-sbefifo";
-			reg = <0x2400 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			fsi_occ1: occ {
-				compatible = "ibm,p10-occ";
-			};
-		};
-
-		fsi_hub1: hub@3400 {
-			compatible = "fsi-master-hub";
-			reg = <0x3400 0x400>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-
-			no-scan-on-init;
-		};
-	};
-
-	cfam@2,0 { /* DCM1_C0 */
-		reg = <2 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		chip-id = <2>;
-
-		scom@1000 {
-			compatible = "ibm,fsi2pib";
-			reg = <0x1000 0x400>;
-		};
-
-		i2c@1800 {
-			compatible = "ibm,fsi-i2c-master";
-			reg = <0x1800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam2_i2c0: i2c-bus@0 {
-				reg = <0>;	/* OM01 */
-			};
-
-			cfam2_i2c1: i2c-bus@1 {
-				reg = <1>;	/* OM23 */
-			};
-
-			cfam2_i2c10: i2c-bus@a {
-				reg = <10>;	/* OP3A */
-			};
-
-			cfam2_i2c11: i2c-bus@b {
-				reg = <11>;	/* OP3B */
-			};
-
-			cfam2_i2c12: i2c-bus@c {
-				reg = <12>;	/* OP4A */
-			};
-
-			cfam2_i2c13: i2c-bus@d {
-				reg = <13>;	/* OP4B */
-			};
-
-			cfam2_i2c14: i2c-bus@e {
-				reg = <14>;	/* OP5A */
-			};
-
-			cfam2_i2c15: i2c-bus@f {
-				reg = <15>;	/* OP5B */
-			};
-		};
-
-		fsi2spi@1c00 {
-			compatible = "ibm,fsi2spi";
-			reg = <0x1c00 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam2_spi0: spi@0 {
-				reg = <0x0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam2_spi1: spi@20 {
-				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam2_spi2: spi@40 {
-				reg = <0x40>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam2_spi3: spi@60 {
-				reg = <0x60>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-		};
-
-		sbefifo@2400 {
-			compatible = "ibm,p9-sbefifo";
-			reg = <0x2400 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			fsi_occ2: occ {
-				compatible = "ibm,p10-occ";
-			};
-		};
-
-		fsi_hub2: hub@3400 {
-			compatible = "fsi-master-hub";
-			reg = <0x3400 0x400>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-
-			no-scan-on-init;
-		};
-	};
-
-	cfam@3,0 { /* DCM1_C1 */
-		reg = <3 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		chip-id = <3>;
-
-		scom@1000 {
-			compatible = "ibm,fsi2pib";
-			reg = <0x1000 0x400>;
-		};
-
-		i2c@1800 {
-			compatible = "ibm,fsi-i2c-master";
-			reg = <0x1800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam3_i2c2: i2c-bus@2 {
-				reg = <2>;	/* OM45 */
-			};
-
-			cfam3_i2c3: i2c-bus@3 {
-				reg = <3>;	/* OM67 */
-			};
-
-			cfam3_i2c10: i2c-bus@a {
-				reg = <10>;	/* OP3A */
-			};
-
-			cfam3_i2c11: i2c-bus@b {
-				reg = <11>;	/* OP3B */
-			};
-
-			cfam3_i2c14: i2c-bus@e {
-				reg = <14>;	/* OP5A */
-			};
-
-			cfam3_i2c15: i2c-bus@f {
-				reg = <15>;	/* OP5B */
-			};
-
-			cfam3_i2c16: i2c-bus@10 {
-				reg = <16>;	/* OP6A */
-			};
-
-			cfam3_i2c17: i2c-bus@11 {
-				reg = <17>;	/* OP6B */
-			};
-		};
-
-		fsi2spi@1c00 {
-			compatible = "ibm,fsi2spi";
-			reg = <0x1c00 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam3_spi0: spi@0 {
-				reg = <0x0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam3_spi1: spi@20 {
-				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam3_spi2: spi@40 {
-				reg = <0x40>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam3_spi3: spi@60 {
-				reg = <0x60>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-		};
-
-		sbefifo@2400 {
-			compatible = "ibm,p9-sbefifo";
-			reg = <0x2400 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			fsi_occ3: occ {
-				compatible = "ibm,p10-occ";
-			};
-		};
-
-		fsi_hub3: hub@3400 {
-			compatible = "fsi-master-hub";
-			reg = <0x3400 0x400>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-
-			no-scan-on-init;
-		};
-	};
-
-	cfam@4,0 { /* DCM2_C0 */
-		reg = <4 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		chip-id = <4>;
-
-		scom@1000 {
-			compatible = "ibm,fsi2pib";
-			reg = <0x1000 0x400>;
-		};
-
-		i2c@1800 {
-			compatible = "ibm,fsi-i2c-master";
-			reg = <0x1800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam4_i2c0: i2c-bus@0 {
-				reg = <0>;	/* OM01 */
-			};
-
-			cfam4_i2c1: i2c-bus@1 {
-				reg = <1>;	/* OM23 */
-			};
-
-			cfam4_i2c10: i2c-bus@a {
-				reg = <10>;	/* OP3A */
-			};
-
-			cfam4_i2c11: i2c-bus@b {
-				reg = <11>;	/* OP3B */
-			};
-
-			cfam4_i2c12: i2c-bus@c {
-				reg = <12>;	/* OP4A */
-			};
-
-			cfam4_i2c13: i2c-bus@d {
-				reg = <13>;	/* OP4B */
-			};
-
-			cfam4_i2c14: i2c-bus@e {
-				reg = <14>;	/* OP5A */
-			};
-
-			cfam4_i2c15: i2c-bus@f {
-				reg = <15>;	/* OP5B */
-			};
-		};
-
-		fsi2spi@1c00 {
-			compatible = "ibm,fsi2spi";
-			reg = <0x1c00 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam4_spi0: spi@0 {
-				reg = <0x0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam4_spi1: spi@20 {
-				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam4_spi2: spi@40 {
-				reg = <0x40>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam4_spi3: spi@60 {
-				reg = <0x60>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-		};
-
-		sbefifo@2400 {
-			compatible = "ibm,p9-sbefifo";
-			reg = <0x2400 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			fsi_occ4: occ {
-				compatible = "ibm,p10-occ";
-			};
-		};
-
-		fsi_hub4: hub@3400 {
-			compatible = "fsi-master-hub";
-			reg = <0x3400 0x400>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-
-			no-scan-on-init;
-		};
-	};
-
-	cfam@5,0 { /* DCM2_C1 */
-		reg = <5 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		chip-id = <5>;
-
-		scom@1000 {
-			compatible = "ibm,fsi2pib";
-			reg = <0x1000 0x400>;
-		};
-
-		i2c@1800 {
-			compatible = "ibm,fsi-i2c-master";
-			reg = <0x1800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam5_i2c2: i2c-bus@2 {
-				reg = <2>;	/* OM45 */
-			};
-
-			cfam5_i2c3: i2c-bus@3 {
-				reg = <3>;	/* OM67 */
-			};
-
-			cfam5_i2c10: i2c-bus@a {
-				reg = <10>;	/* OP3A */
-			};
-
-			cfam5_i2c11: i2c-bus@b {
-				reg = <11>;	/* OP3B */
-			};
-
-			cfam5_i2c14: i2c-bus@e {
-				reg = <14>;	/* OP5A */
-			};
-
-			cfam5_i2c15: i2c-bus@f {
-				reg = <15>;	/* OP5B */
-			};
-
-			cfam5_i2c16: i2c-bus@10 {
-				reg = <16>;	/* OP6A */
-			};
-
-			cfam5_i2c17: i2c-bus@11 {
-				reg = <17>;	/* OP6B */
-			};
-		};
-
-		fsi2spi@1c00 {
-			compatible = "ibm,fsi2spi";
-			reg = <0x1c00 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam5_spi0: spi@0 {
-				reg = <0x0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam5_spi1: spi@20 {
-				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam5_spi2: spi@40 {
-				reg = <0x40>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam5_spi3: spi@60 {
-				reg = <0x60>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-		};
-
-		sbefifo@2400 {
-			compatible = "ibm,p9-sbefifo";
-			reg = <0x2400 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			fsi_occ5: occ {
-				compatible = "ibm,p10-occ";
-			};
-		};
-
-		fsi_hub5: hub@3400 {
-			compatible = "fsi-master-hub";
-			reg = <0x3400 0x400>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-
-			no-scan-on-init;
-		};
-	};
-
-	cfam@6,0 { /* DCM3_C0 */
-		reg = <6 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		chip-id = <6>;
-
-		scom@1000 {
-			compatible = "ibm,fsi2pib";
-			reg = <0x1000 0x400>;
-		};
-
-		i2c@1800 {
-			compatible = "ibm,fsi-i2c-master";
-			reg = <0x1800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam6_i2c0: i2c-bus@0 {
-				reg = <0>;	/* OM01 */
-			};
-
-			cfam6_i2c1: i2c-bus@1 {
-				reg = <1>;	/* OM23 */
-			};
-
-			cfam6_i2c10: i2c-bus@a {
-				reg = <10>;	/* OP3A */
-			};
-
-			cfam6_i2c11: i2c-bus@b {
-				reg = <11>;	/* OP3B */
-			};
-
-			cfam6_i2c12: i2c-bus@c {
-				reg = <12>;	/* OP4A */
-			};
-
-			cfam6_i2c13: i2c-bus@d {
-				reg = <13>;	/* OP4B */
-			};
-
-			cfam6_i2c14: i2c-bus@e {
-				reg = <14>;	/* OP5A */
-			};
-
-			cfam6_i2c15: i2c-bus@f {
-				reg = <15>;	/* OP5B */
-			};
-		};
-
-		fsi2spi@1c00 {
-			compatible = "ibm,fsi2spi";
-			reg = <0x1c00 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam6_spi0: spi@0 {
-				reg = <0x0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam6_spi1: spi@20 {
-				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam6_spi2: spi@40 {
-				reg = <0x40>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam6_spi3: spi@60 {
-				reg = <0x60>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-		};
-
-		sbefifo@2400 {
-			compatible = "ibm,p9-sbefifo";
-			reg = <0x2400 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			fsi_occ6: occ {
-				compatible = "ibm,p10-occ";
-			};
-		};
-
-		fsi_hub6: hub@3400 {
-			compatible = "fsi-master-hub";
-			reg = <0x3400 0x400>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-
-			no-scan-on-init;
-		};
-	};
-
-	cfam@7,0 { /* DCM3_C1 */
-		reg = <7 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		chip-id = <7>;
-
-		scom@1000 {
-			compatible = "ibm,fsi2pib";
-			reg = <0x1000 0x400>;
-		};
-
-		i2c@1800 {
-			compatible = "ibm,fsi-i2c-master";
-			reg = <0x1800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam7_i2c2: i2c-bus@2 {
-				reg = <2>;	/* OM45 */
-			};
-
-			cfam7_i2c3: i2c-bus@3 {
-				reg = <3>;	/* OM67 */
-			};
-
-			cfam7_i2c10: i2c-bus@a {
-				reg = <10>;	/* OP3A */
-			};
-
-			cfam7_i2c11: i2c-bus@b {
-				reg = <11>;	/* OP3B */
-			};
-
-			cfam7_i2c14: i2c-bus@e {
-				reg = <14>;	/* OP5A */
-			};
-
-			cfam7_i2c15: i2c-bus@f {
-				reg = <15>;	/* OP5B */
-			};
-
-			cfam7_i2c16: i2c-bus@10 {
-				reg = <16>;	/* OP6A */
-			};
-
-			cfam7_i2c17: i2c-bus@11 {
-				reg = <17>;	/* OP6B */
-			};
-		};
-
-		fsi2spi@1c00 {
-			compatible = "ibm,fsi2spi";
-			reg = <0x1c00 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam7_spi0: spi@0 {
-				reg = <0x0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam7_spi1: spi@20 {
-				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam7_spi2: spi@40 {
-				reg = <0x40>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam7_spi3: spi@60 {
-				reg = <0x60>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-		};
-
-		sbefifo@2400 {
-			compatible = "ibm,p9-sbefifo";
-			reg = <0x2400 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			fsi_occ7: occ {
-				compatible = "ibm,p10-occ";
-			};
-		};
-
-		fsi_hub7: hub@3400 {
-			compatible = "fsi-master-hub";
-			reg = <0x3400 0x400>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-
-			no-scan-on-init;
-		};
-	};
-};
-
-/* Legacy OCC numbering (to get rid of when userspace is fixed) */
-&fsi_occ0 {
-	reg = <1>;
-};
-
-&fsi_occ1 {
-	reg = <2>;
-};
-
-&fsi_occ2 {
-	reg = <3>;
-};
-
-&fsi_occ3 {
-	reg = <4>;
-};
-
-&fsi_occ4 {
-	reg = <5>;
-};
-
-&fsi_occ5 {
-	reg = <6>;
-};
-
-&fsi_occ6 {
-	reg = <7>;
-};
-
-&fsi_occ7 {
-	reg = <8>;
-};
-
-&ibt {
-	status = "okay";
-};
-
-&vuart1 {
-	status = "okay";
-};
-
-&vuart2 {
-	status = "okay";
-};
-
-&lpc_ctrl {
-	status = "okay";
-	memory-region = <&flash_memory>;
-};
-
-&kcs4 {
-	compatible = "openbmc,mctp-lpc";
-	status = "okay";
-};
-
-&mac2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii3_default>;
-	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
-		 <&syscon ASPEED_CLK_MAC3RCLK>;
-	clock-names = "MACCLK", "RCLK";
-	use-ncsi;
-};
-
-&mac3 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii4_default>;
-	clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
-		 <&syscon ASPEED_CLK_MAC4RCLK>;
-	clock-names = "MACCLK", "RCLK";
-	use-ncsi;
-};
-
-&wdt1 {
-	aspeed,reset-type = "none";
-	aspeed,external-signal;
-	aspeed,ext-push-pull;
-	aspeed,ext-active-high;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdtrst1_default>;
-};
-
-&wdt2 {
-	status = "okay";
-};
-
-&xdma {
-	status = "okay";
-	memory-region = <&vga_memory>;
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
deleted file mode 100644
index 6419c9762c0b..000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ /dev/null
@@ -1,1779 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// Copyright 2019 IBM Corp.
-/dts-v1/;
-
-#include "aspeed-g6.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-#include <dt-bindings/i2c/i2c.h>
-#include <dt-bindings/leds/leds-pca955x.h>
-
-/ {
-	model = "Rainier 2U";
-	compatible = "ibm,rainier-bmc", "aspeed,ast2600";
-
-	aliases {
-		i2c100 = &cfam0_i2c0;
-		i2c101 = &cfam0_i2c1;
-		i2c110 = &cfam0_i2c10;
-		i2c111 = &cfam0_i2c11;
-		i2c112 = &cfam0_i2c12;
-		i2c113 = &cfam0_i2c13;
-		i2c114 = &cfam0_i2c14;
-		i2c115 = &cfam0_i2c15;
-		i2c202 = &cfam1_i2c2;
-		i2c203 = &cfam1_i2c3;
-		i2c210 = &cfam1_i2c10;
-		i2c211 = &cfam1_i2c11;
-		i2c214 = &cfam1_i2c14;
-		i2c215 = &cfam1_i2c15;
-		i2c216 = &cfam1_i2c16;
-		i2c217 = &cfam1_i2c17;
-		i2c300 = &cfam2_i2c0;
-		i2c301 = &cfam2_i2c1;
-		i2c310 = &cfam2_i2c10;
-		i2c311 = &cfam2_i2c11;
-		i2c312 = &cfam2_i2c12;
-		i2c313 = &cfam2_i2c13;
-		i2c314 = &cfam2_i2c14;
-		i2c315 = &cfam2_i2c15;
-		i2c402 = &cfam3_i2c2;
-		i2c403 = &cfam3_i2c3;
-		i2c410 = &cfam3_i2c10;
-		i2c411 = &cfam3_i2c11;
-		i2c414 = &cfam3_i2c14;
-		i2c415 = &cfam3_i2c15;
-		i2c416 = &cfam3_i2c16;
-		i2c417 = &cfam3_i2c17;
-
-		serial4 = &uart5;
-		i2c16 = &i2c2mux0;
-		i2c17 = &i2c2mux1;
-		i2c18 = &i2c2mux2;
-		i2c19 = &i2c2mux3;
-		i2c20 = &i2c4mux0chn0;
-		i2c21 = &i2c4mux0chn1;
-		i2c22 = &i2c4mux0chn2;
-		i2c23 = &i2c5mux0chn0;
-		i2c24 = &i2c5mux0chn1;
-		i2c25 = &i2c6mux0chn0;
-		i2c26 = &i2c6mux0chn1;
-		i2c27 = &i2c6mux0chn2;
-		i2c28 = &i2c6mux0chn3;
-		i2c29 = &i2c11mux0chn0;
-		i2c30 = &i2c11mux0chn1;
-
-		spi10 = &cfam0_spi0;
-		spi11 = &cfam0_spi1;
-		spi12 = &cfam0_spi2;
-		spi13 = &cfam0_spi3;
-		spi20 = &cfam1_spi0;
-		spi21 = &cfam1_spi1;
-		spi22 = &cfam1_spi2;
-		spi23 = &cfam1_spi3;
-		spi30 = &cfam2_spi0;
-		spi31 = &cfam2_spi1;
-		spi32 = &cfam2_spi2;
-		spi33 = &cfam2_spi3;
-		spi40 = &cfam3_spi0;
-		spi41 = &cfam3_spi1;
-		spi42 = &cfam3_spi2;
-		spi43 = &cfam3_spi3;
-	};
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200n8";
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		flash_memory: region@b8000000 {
-			no-map;
-			reg = <0xb8000000 0x04000000>; /* 64M */
-		};
-
-		ramoops@bc000000 {
-			compatible = "ramoops";
-			reg = <0xbc000000 0x180000>; /* 16 * (3 * 0x8000) */
-			record-size = <0x8000>;
-			console-size = <0x8000>;
-			pmsg-size = <0x8000>;
-			max-reason = <3>; /* KMSG_DUMP_EMERG */
-		};
-
-		vga_memory: region@bf000000 {
-			no-map;
-			compatible = "shared-dma-pool";
-			reg = <0xbf000000 0x01000000>;  /* 16M */
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		ps0-presence {
-			label = "ps0-presence";
-			gpios = <&gpio0 ASPEED_GPIO(S, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(S, 0)>;
-		};
-
-		ps1-presence {
-			label = "ps1-presence";
-			gpios = <&gpio0 ASPEED_GPIO(S, 1) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(S, 1)>;
-		};
-
-		ps2-presence {
-			label = "ps2-presence";
-			gpios = <&gpio0 ASPEED_GPIO(S, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(S, 2)>;
-		};
-
-		ps3-presence {
-			label = "ps3-presence";
-			gpios = <&gpio0 ASPEED_GPIO(S, 3) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(S, 3)>;
-		};
-	};
-
-	i2c2mux: i2cmux {
-		compatible = "i2c-mux-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-
-		i2c-parent = <&i2c2>;
-		mux-gpios = <&gpio0 ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>,
-			    <&gpio0 ASPEED_GPIO(G, 5) GPIO_ACTIVE_HIGH>;
-		idle-state = <0>;
-
-		i2c2mux0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		i2c2mux1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		i2c2mux2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		i2c2mux3: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		/* BMC Card fault LED at the back */
-		bmc-ingraham0 {
-			gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
-		};
-
-		/* Enclosure ID LED at the back */
-		rear-enc-id0 {
-			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
-		};
-
-		/* Enclosure fault LED at the back */
-		rear-enc-fault0 {
-			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
-		};
-
-		/* PCIE slot power LED */
-		pcieslot-power {
-			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <1000>;
-
-		fan0-presence {
-			label = "fan0-presence";
-			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
-			linux,code = <6>;
-		};
-
-		fan1-presence {
-			label = "fan1-presence";
-			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
-			linux,code = <7>;
-		};
-
-		fan2-presence {
-			label = "fan2-presence";
-			gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
-			linux,code = <8>;
-		};
-
-		fan3-presence {
-			label = "fan3-presence";
-			gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
-			linux,code = <9>;
-		};
-
-		fan4-presence {
-			label = "fan4-presence";
-			gpios = <&pca0 10 GPIO_ACTIVE_LOW>;
-			linux,code = <10>;
-		};
-
-		fan5-presence {
-			label = "fan5-presence";
-			gpios = <&pca0 11 GPIO_ACTIVE_LOW>;
-			linux,code = <11>;
-		};
-	};
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&gpio0 {
-	gpio-line-names =
-	/*A0-A7*/	"","","","","","","","",
-	/*B0-B7*/	"","","","","","","checkstop","",
-	/*C0-C7*/	"","","","","","","","",
-	/*D0-D7*/	"","","","","","","","",
-	/*E0-E7*/	"","","","","","","","",
-	/*F0-F7*/	"","","","","","","","",
-	/*G0-G7*/	"","","","","","","","",
-	/*H0-H7*/	"","bmc-ingraham0","rear-enc-id0","rear-enc-fault0","","","","",
-	/*I0-I7*/	"","","","","","","","",
-	/*J0-J7*/	"","","","","","","","",
-	/*K0-K7*/	"","","","","","","","",
-	/*L0-L7*/	"","","","","","","","",
-	/*M0-M7*/	"","","","","","","","",
-	/*N0-N7*/	"","","","","","","","",
-	/*O0-O7*/	"","","","usb-power","","","","",
-	/*P0-P7*/	"","","","","pcieslot-power","","","",
-	/*Q0-Q7*/	"cfam-reset","","","","","","","",
-	/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","","",
-	/*S0-S7*/	"presence-ps0","presence-ps1","presence-ps2","presence-ps3",
-				"","","","",
-	/*T0-T7*/	"","","","","","","","",
-	/*U0-U7*/	"","","","","","","","",
-	/*V0-V7*/	"","","","","","","","",
-	/*W0-W7*/	"","","","","","","","",
-	/*X0-X7*/	"","","","","","","","",
-	/*Y0-Y7*/	"","","","","","","","",
-	/*Z0-Z7*/	"","","","","","","","";
-
-	pin_mclr_vpp {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(P, 7) GPIO_OPEN_DRAIN>;
-		output-high;
-		line-name = "mclr_vpp";
-	};
-
-	i2c3_mux_oe_n {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(G, 6) GPIO_ACTIVE_LOW>;
-		output-high;
-		line-name = "I2C3_MUX_OE_N";
-	};
-};
-
-&emmc_controller {
-	status = "okay";
-};
-
-&pinctrl_emmc_default {
-	bias-disable;
-};
-
-&emmc {
-	status = "okay";
-	clk-phase-mmc-hs200 = <180>, <180>;
-};
-
-&fsim0 {
-	status = "okay";
-
-	#address-cells = <2>;
-	#size-cells = <0>;
-
-	/*
-	 * CFAM Reset is supposed to be active low but pass1 hardware is wired
-	 * active high.
-	 */
-	cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>;
-
-	cfam@0,0 {
-		reg = <0 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		chip-id = <0>;
-
-		scom@1000 {
-			compatible = "ibm,fsi2pib";
-			reg = <0x1000 0x400>;
-		};
-
-		i2c@1800 {
-			compatible = "ibm,fsi-i2c-master";
-			reg = <0x1800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam0_i2c0: i2c-bus@0 {
-				reg = <0>;	/* OMI01 */
-			};
-
-			cfam0_i2c1: i2c-bus@1 {
-				reg = <1>;	/* OMI23 */
-			};
-
-			cfam0_i2c10: i2c-bus@a {
-				reg = <10>;	/* OP3A */
-			};
-
-			cfam0_i2c11: i2c-bus@b {
-				reg = <11>;	/* OP3B */
-			};
-
-			cfam0_i2c12: i2c-bus@c {
-				reg = <12>;	/* OP4A */
-			};
-
-			cfam0_i2c13: i2c-bus@d {
-				reg = <13>;	/* OP4B */
-			};
-
-			cfam0_i2c14: i2c-bus@e {
-				reg = <14>;	/* OP5A */
-			};
-
-			cfam0_i2c15: i2c-bus@f {
-				reg = <15>;	/* OP5B */
-			};
-		};
-
-		fsi2spi@1c00 {
-			compatible = "ibm,fsi2spi";
-			reg = <0x1c00 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam0_spi0: spi@0 {
-				reg = <0x0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam0_spi1: spi@20 {
-				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam0_spi2: spi@40 {
-				reg = <0x40>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam0_spi3: spi@60 {
-				reg = <0x60>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-                };
-
-		sbefifo@2400 {
-			compatible = "ibm,p9-sbefifo";
-			reg = <0x2400 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			fsi_occ0: occ {
-				compatible = "ibm,p10-occ";
-			};
-		};
-
-		fsi_hub0: hub@3400 {
-			compatible = "fsi-master-hub";
-			reg = <0x3400 0x400>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-		};
-	};
-};
-
-&fsi_hub0 {
-	cfam@1,0 {
-		reg = <1 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		chip-id = <1>;
-
-		scom@1000 {
-			compatible = "ibm,fsi2pib";
-			reg = <0x1000 0x400>;
-		};
-
-		i2c@1800 {
-			compatible = "ibm,fsi-i2c-master";
-			reg = <0x1800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam1_i2c2: i2c-bus@2 {
-				reg = <2>;	/* OMI45 */
-			};
-
-			cfam1_i2c3: i2c-bus@3 {
-				reg = <3>;	/* OMI67 */
-			};
-
-			cfam1_i2c10: i2c-bus@a {
-				reg = <10>;	/* OP3A */
-			};
-
-			cfam1_i2c11: i2c-bus@b {
-				reg = <11>;	/* OP3B */
-			};
-
-			cfam1_i2c14: i2c-bus@e {
-				reg = <14>;	/* OP5A */
-			};
-
-			cfam1_i2c15: i2c-bus@f {
-				reg = <15>;	/* OP5B */
-			};
-
-			cfam1_i2c16: i2c-bus@10 {
-				reg = <16>;	/* OP6A */
-			};
-
-			cfam1_i2c17: i2c-bus@11 {
-				reg = <17>;	/* OP6B */
-			};
-		};
-
-		fsi2spi@1c00 {
-			compatible = "ibm,fsi2spi";
-			reg = <0x1c00 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam1_spi0: spi@0 {
-				reg = <0x0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam1_spi1: spi@20 {
-				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam1_spi2: spi@40 {
-				reg = <0x40>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam1_spi3: spi@60 {
-				reg = <0x60>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-                };
-
-		sbefifo@2400 {
-			compatible = "ibm,p9-sbefifo";
-			reg = <0x2400 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			fsi_occ1: occ {
-				compatible = "ibm,p10-occ";
-			};
-		};
-
-		fsi_hub1: hub@3400 {
-			compatible = "fsi-master-hub";
-			reg = <0x3400 0x400>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-
-			no-scan-on-init;
-		};
-	};
-
-	cfam@2,0 {
-		reg = <2 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		chip-id = <2>;
-
-		scom@1000 {
-			compatible = "ibm,fsi2pib";
-			reg = <0x1000 0x400>;
-		};
-
-		i2c@1800 {
-			compatible = "ibm,fsi-i2c-master";
-			reg = <0x1800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam2_i2c0: i2c-bus@0 {
-				reg = <0>;	/* OM01 */
-			};
-
-			cfam2_i2c1: i2c-bus@1 {
-				reg = <1>;	/* OM23 */
-			};
-
-			cfam2_i2c10: i2c-bus@a {
-				reg = <10>;	/* OP3A */
-			};
-
-			cfam2_i2c11: i2c-bus@b {
-				reg = <11>;	/* OP3B */
-			};
-
-			cfam2_i2c12: i2c-bus@c {
-				reg = <12>;	/* OP4A */
-			};
-
-			cfam2_i2c13: i2c-bus@d {
-				reg = <13>;	/* OP4B */
-			};
-
-			cfam2_i2c14: i2c-bus@e {
-				reg = <14>;	/* OP5A */
-			};
-
-			cfam2_i2c15: i2c-bus@f {
-				reg = <15>;	/* OP5B */
-			};
-		};
-
-		fsi2spi@1c00 {
-			compatible = "ibm,fsi2spi";
-			reg = <0x1c00 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam2_spi0: spi@0 {
-				reg = <0x0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam2_spi1: spi@20 {
-				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam2_spi2: spi@40 {
-				reg = <0x40>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam2_spi3: spi@60 {
-				reg = <0x60>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-		};
-
-		sbefifo@2400 {
-			compatible = "ibm,p9-sbefifo";
-			reg = <0x2400 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			fsi_occ2: occ {
-				compatible = "ibm,p10-occ";
-			};
-		};
-
-		fsi_hub2: hub@3400 {
-			compatible = "fsi-master-hub";
-			reg = <0x3400 0x400>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-
-			no-scan-on-init;
-		};
-	};
-
-	cfam@3,0 {
-		reg = <3 0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		chip-id = <3>;
-
-		scom@1000 {
-			compatible = "ibm,fsi2pib";
-			reg = <0x1000 0x400>;
-		};
-
-		i2c@1800 {
-			compatible = "ibm,fsi-i2c-master";
-			reg = <0x1800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam3_i2c2: i2c-bus@2 {
-				reg = <2>;	/* OM45 */
-			};
-
-			cfam3_i2c3: i2c-bus@3 {
-				reg = <3>;	/* OM67 */
-			};
-
-			cfam3_i2c10: i2c-bus@a {
-				reg = <10>;	/* OP3A */
-			};
-
-			cfam3_i2c11: i2c-bus@b {
-				reg = <11>;	/* OP3B */
-			};
-
-			cfam3_i2c14: i2c-bus@e {
-				reg = <14>;	/* OP5A */
-			};
-
-			cfam3_i2c15: i2c-bus@f {
-				reg = <15>;	/* OP5B */
-			};
-
-			cfam3_i2c16: i2c-bus@10 {
-				reg = <16>;	/* OP6A */
-			};
-
-			cfam3_i2c17: i2c-bus@11 {
-				reg = <17>;	/* OP6B */
-			};
-		};
-
-		fsi2spi@1c00 {
-			compatible = "ibm,fsi2spi";
-			reg = <0x1c00 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cfam3_spi0: spi@0 {
-				reg = <0x0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam3_spi1: spi@20 {
-				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam3_spi2: spi@40 {
-				reg = <0x40>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-
-			cfam3_spi3: spi@60 {
-				reg = <0x60>;
-				compatible = "ibm,fsi2spi-restricted";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				eeprom@0 {
-					at25,byte-len = <0x80000>;
-					at25,addr-mode = <4>;
-					at25,page-size = <256>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-		};
-
-		sbefifo@2400 {
-			compatible = "ibm,p9-sbefifo";
-			reg = <0x2400 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			fsi_occ3: occ {
-				compatible = "ibm,p10-occ";
-			};
-		};
-
-		fsi_hub3: hub@3400 {
-			compatible = "fsi-master-hub";
-			reg = <0x3400 0x400>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-
-			no-scan-on-init;
-		};
-	};
-};
-
-/* Legacy OCC numbering (to get rid of when userspace is fixed) */
-&fsi_occ0 {
-	reg = <1>;
-};
-
-&fsi_occ1 {
-	reg = <2>;
-};
-
-&fsi_occ2 {
-	reg = <3>;
-};
-
-&fsi_occ3 {
-	reg = <4>;
-};
-
-&ibt {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-
-	eeprom@51 {
-		compatible = "atmel,24c64";
-		reg = <0x51>;
-	};
-
-	tca_pres1: tca9554@20{
-		compatible = "ti,tca9554";
-		reg = <0x20>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names = "",
-			"RUSSEL_FW_I2C_ENABLE_N",
-			"RUSSEL_OPPANEL_PRESENCE_N",
-			"BLYTH_OPPANEL_PRESENCE_N",
-			"CPU_TPM_CARD_PRESENT_N",
-			"DASD_BP2_PRESENT_N",
-			"DASD_BP1_PRESENT_N",
-			"DASD_BP0_PRESENT_N";
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-	};
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-
-	power-supply@68 {
-		compatible = "ibm,cffps";
-		reg = <0x68>;
-	};
-
-	power-supply@69 {
-		compatible = "ibm,cffps";
-		reg = <0x69>;
-	};
-
-	pca_pres1: pca9552@61 {
-		compatible = "nxp,pca9552";
-		reg = <0x61>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names =
-			"SLOT0_PRSNT_EN_RSVD", "SLOT1_PRSNT_EN_RSVD",
-			"SLOT2_PRSNT_EN_RSVD", "SLOT3_PRSNT_EN_RSVD",
-			"SLOT4_PRSNT_EN_RSVD", "SLOT0_EXPANDER_PRSNT_N",
-			"SLOT1_EXPANDER_PRSNT_N", "SLOT2_EXPANDER_PRSNT_N",
-			"SLOT3_EXPANDER_PRSNT_N", "SLOT4_EXPANDER_PRSNT_N",
-			"", "", "", "", "", "";
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@8 {
-			reg = <8>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@9 {
-			reg = <9>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@10 {
-			reg = <10>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@11 {
-			reg = <11>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@12 {
-			reg = <12>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@13 {
-			reg = <13>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@14 {
-			reg = <14>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@15 {
-			reg = <15>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-	};
-};
-
-&i2c4 {
-	status = "okay";
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	tmp275@49 {
-		compatible = "ti,tmp275";
-		reg = <0x49>;
-	};
-
-	tmp275@4a {
-		compatible = "ti,tmp275";
-		reg = <0x4a>;
-	};
-
-	pca9546@70 {
-		compatible = "nxp,pca9546";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-		i2c-mux-idle-disconnect;
-
-		i2c4mux0chn0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-			};
-		};
-
-		i2c4mux0chn1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			eeprom@51 {
-				compatible = "atmel,24c64";
-				reg = <0x51>;
-			};
-		};
-
-		i2c4mux0chn2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-
-			eeprom@52 {
-				compatible = "atmel,24c64";
-				reg = <0x52>;
-			};
-		};
-	};
-};
-
-&i2c5 {
-	status = "okay";
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	tmp275@49 {
-		compatible = "ti,tmp275";
-		reg = <0x49>;
-	};
-
-	pca9546@70 {
-		compatible = "nxp,pca9546";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-		i2c-mux-idle-disconnect;
-
-		i2c5mux0chn0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-			};
-		};
-
-		i2c5mux0chn1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			eeprom@51 {
-				compatible = "atmel,24c64";
-				reg = <0x51>;
-			};
-		};
-	};
-};
-
-&i2c6 {
-	status = "okay";
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	tmp275@4a {
-		compatible = "ti,tmp275";
-		reg = <0x4a>;
-	};
-
-	tmp275@4b {
-		compatible = "ti,tmp275";
-		reg = <0x4b>;
-	};
-
-	pca9546@70 {
-		compatible = "nxp,pca9546";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-		i2c-mux-idle-disconnect;
-
-		i2c6mux0chn0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			eeprom@53 {
-				compatible = "atmel,24c64";
-				reg = <0x53>;
-			};
-		};
-
-		i2c6mux0chn1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			eeprom@52 {
-				compatible = "atmel,24c64";
-				reg = <0x52>;
-			};
-		};
-
-		i2c6mux0chn2: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-			};
-		};
-
-		i2c6mux0chn3: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-
-			eeprom@51 {
-				compatible = "atmel,24c64";
-				reg = <0x51>;
-			};
-		};
-	};
-};
-
-&i2c7 {
-	multi-master;
-	status = "okay";
-
-	si7021-a20@40 {
-		compatible = "silabs,si7020";
-		reg = <0x40>;
-	};
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	max: max31785@52 {
-		compatible = "maxim,max31785a";
-		reg = <0x52>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		fan0: fan@0 {
-			compatible = "pmbus-fan";
-			reg = <0>;
-			tach-pulses = <2>;
-		};
-
-		fan1: fan@1 {
-			compatible = "pmbus-fan";
-			reg = <1>;
-			tach-pulses = <2>;
-		};
-
-		fan2: fan@2 {
-			compatible = "pmbus-fan";
-			reg = <2>;
-			tach-pulses = <2>;
-		};
-
-		fan3: fan@3 {
-			compatible = "pmbus-fan";
-			reg = <3>;
-			tach-pulses = <2>;
-		};
-
-		fan4: fan@4 {
-			compatible = "pmbus-fan";
-			reg = <4>;
-			tach-pulses = <2>;
-		};
-
-		fan5: fan@5 {
-			compatible = "pmbus-fan";
-			reg = <5>;
-			tach-pulses = <2>;
-		};
-	};
-
-	pca0: pca9552@61 {
-		compatible = "nxp,pca9552";
-		reg = <0x61>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@8 {
-			reg = <8>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@9 {
-			reg = <9>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@10 {
-			reg = <10>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@11 {
-			reg = <11>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@12 {
-			reg = <12>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@13 {
-			reg = <13>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@14 {
-			reg = <14>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@15 {
-			reg = <15>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-	};
-
-	ibm-panel@62 {
-		compatible = "ibm,op-panel";
-		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
-	};
-
-	dps: dps310@76 {
-		compatible = "infineon,dps310";
-		reg = <0x76>;
-		#io-channel-cells = <0>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-
-	eeprom@51 {
-		compatible = "atmel,24c64";
-		reg = <0x51>;
-	};
-};
-
-&i2c8 {
-	status = "okay";
-
-	ucd90320@11 {
-		compatible = "ti,ucd90320";
-		reg = <0x11>;
-	};
-
-	rtc@32 {
-		compatible = "epson,rx8900";
-		reg = <0x32>;
-	};
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	tmp275@4a {
-		compatible = "ti,tmp275";
-		reg = <0x4a>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-
-	eeprom@51 {
-		compatible = "atmel,24c64";
-		reg = <0x51>;
-	};
-
-	pca_pres2: pca9552@61 {
-		compatible = "nxp,pca9552";
-		reg = <0x61>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names =
-			"SLOT6_PRSNT_EN_RSVD", "SLOT7_PRSNT_EN_RSVD",
-			"SLOT8_PRSNT_EN_RSVD", "SLOT9_PRSNT_EN_RSVD",
-			"SLOT10_PRSNT_EN_RSVD", "SLOT11_PRSNT_EN_RSVD",
-			"SLOT6_EXPANDER_PRSNT_N", "SLOT7_EXPANDER_PRSNT_N",
-			"SLOT8_EXPANDER_PRSNT_N", "SLOT9_EXPANDER_PRSNT_N",
-			"SLOT10_EXPANDER_PRSNT_N", "SLOT11_EXPANDER_PRSNT_N",
-			"", "", "", "";
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@8 {
-			reg = <8>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@9 {
-			reg = <9>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@10 {
-			reg = <10>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@11 {
-			reg = <11>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@12 {
-			reg = <12>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@13 {
-			reg = <13>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@14 {
-			reg = <14>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@15 {
-			reg = <15>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-	};
-
-};
-
-&i2c9 {
-	status = "okay";
-
-	tmp423a@4c {
-		compatible = "ti,tmp423";
-		reg = <0x4c>;
-	};
-
-	tmp423b@4d {
-		compatible = "ti,tmp423";
-		reg = <0x4d>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c128";
-		reg = <0x50>;
-	};
-};
-
-&i2c10 {
-	status = "okay";
-
-	tmp423a@4c {
-		compatible = "ti,tmp423";
-		reg = <0x4c>;
-	};
-
-	tmp423b@4d {
-		compatible = "ti,tmp423";
-		reg = <0x4d>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c128";
-		reg = <0x50>;
-	};
-};
-
-&i2c11 {
-	status = "okay";
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	tmp275@49 {
-		compatible = "ti,tmp275";
-		reg = <0x49>;
-	};
-
-	pca9546@70 {
-		compatible = "nxp,pca9546";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-		i2c-mux-idle-disconnect;
-
-		i2c11mux0chn0: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-			};
-		};
-
-		i2c11mux0chn1: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			eeprom@51 {
-				compatible = "atmel,24c64";
-				reg = <0x51>;
-			};
-		};
-	};
-};
-
-&i2c12 {
-	status = "okay";
-};
-
-&i2c13 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-};
-
-&i2c14 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-};
-
-&i2c15 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-};
-
-&vuart1 {
-	status = "okay";
-};
-
-&vuart2 {
-	status = "okay";
-};
-
-&lpc_ctrl {
-	status = "okay";
-	memory-region = <&flash_memory>;
-};
-
-&mac2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii3_default>;
-	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
-		 <&syscon ASPEED_CLK_MAC3RCLK>;
-	clock-names = "MACCLK", "RCLK";
-	use-ncsi;
-};
-
-&mac3 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii4_default>;
-	clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
-		 <&syscon ASPEED_CLK_MAC4RCLK>;
-	clock-names = "MACCLK", "RCLK";
-	use-ncsi;
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bmc";
-		spi-max-frequency = <50000000>;
-#include "openbmc-flash-layout-128.dtsi"
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "pnor";
-		spi-max-frequency = <100000000>;
-	};
-};
-
-&wdt1 {
-	aspeed,reset-type = "none";
-	aspeed,external-signal;
-	aspeed,ext-push-pull;
-	aspeed,ext-active-high;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdtrst1_default>;
-};
-
-&wdt2 {
-	status = "okay";
-};
-
-&xdma {
-	status = "okay";
-	memory-region = <&vga_memory>;
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
deleted file mode 100644
index a52a289cee85..000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
+++ /dev/null
@@ -1,1380 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/dts-v1/;
-#include "aspeed-g5.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-#include <dt-bindings/leds/leds-pca955x.h>
-
-/ {
-	model = "Mihawk BMC";
-	compatible = "ibm,mihawk-bmc", "aspeed,ast2500";
-
-	aliases {
-		i2c215 = &bus6_mux215;
-		i2c216 = &bus6_mux216;
-		i2c217 = &bus6_mux217;
-		i2c218 = &bus6_mux218;
-		i2c219 = &bus6_mux219;
-		i2c220 = &bus6_mux220;
-		i2c221 = &bus6_mux221;
-		i2c222 = &bus6_mux222;
-		i2c223 = &bus7_mux223;
-		i2c224 = &bus7_mux224;
-		i2c225 = &bus7_mux225;
-		i2c226 = &bus7_mux226;
-		i2c227 = &bus7_mux227;
-		i2c228 = &bus7_mux228;
-		i2c229 = &bus7_mux229;
-		i2c230 = &bus7_mux230;
-		i2c231 = &bus9_mux231;
-		i2c232 = &bus9_mux232;
-		i2c233 = &bus9_mux233;
-		i2c234 = &bus9_mux234;
-		i2c235 = &bus9_mux235;
-		i2c236 = &bus9_mux236;
-		i2c237 = &bus9_mux237;
-		i2c238 = &bus9_mux238;
-		i2c239 = &bus10_mux239;
-		i2c240 = &bus10_mux240;
-		i2c241 = &bus10_mux241;
-		i2c242 = &bus10_mux242;
-		i2c243 = &bus10_mux243;
-		i2c244 = &bus10_mux244;
-		i2c245 = &bus10_mux245;
-		i2c246 = &bus10_mux246;
-		i2c247 = &bus12_mux247;
-		i2c248 = &bus12_mux248;
-		i2c249 = &bus12_mux249;
-		i2c250 = &bus12_mux250;
-		i2c251 = &bus13_mux251;
-		i2c252 = &bus13_mux252;
-		i2c253 = &bus13_mux253;
-		i2c254 = &bus13_mux254;
-		i2c255 = &bus13_mux255;
-		i2c256 = &bus13_mux256;
-		i2c257 = &bus13_mux257;
-		i2c258 = &bus13_mux258;
-	};
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlycon";
-	};
-
-	memory@80000000 {
-		reg = <0x80000000 0x20000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		flash_memory: region@98000000 {
-			no-map;
-			reg = <0x98000000 0x04000000>; /* 64M */
-		};
-
-		gfx_memory: framebuffer {
-			size = <0x01000000>;
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-
-		video_engine_memory: jpegbuffer {
-			size = <0x02000000>;
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		air-water {
-			label = "air-water";
-			gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(F, 6)>;
-		};
-
-		checkstop {
-			label = "checkstop";
-			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(J, 2)>;
-		};
-
-		ps0-presence {
-			label = "ps0-presence";
-			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(Z, 2)>;
-		};
-
-		ps1-presence {
-			label = "ps1-presence";
-			gpios = <&gpio ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(Z, 0)>;
-		};
-		id-button {
-			label = "id-button";
-			gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(F, 1)>;
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		poll-interval = <1000>;
-
-		fan0-presence {
-			label = "fan0-presence";
-			gpios = <&pca9552 9 GPIO_ACTIVE_LOW>;
-			linux,code = <9>;
-		};
-
-		fan1-presence {
-			label = "fan1-presence";
-			gpios = <&pca9552 10 GPIO_ACTIVE_LOW>;
-			linux,code = <10>;
-		};
-
-		fan2-presence {
-			label = "fan2-presence";
-			gpios = <&pca9552 11 GPIO_ACTIVE_LOW>;
-			linux,code = <11>;
-		};
-
-		fan3-presence {
-			label = "fan3-presence";
-			gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
-			linux,code = <12>;
-		};
-
-		fan4-presence {
-			label = "fan4-presence";
-			gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
-			linux,code = <13>;
-		};
-
-		fan5-presence {
-			label = "fan5-presence";
-			gpios = <&pca9552 14 GPIO_ACTIVE_LOW>;
-			linux,code = <14>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		front-fault {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>;
-		};
-
-		power-button {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_LOW>;
-		};
-
-		front-id {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>;
-		};
-
-
-		fan0 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca9552 0 GPIO_ACTIVE_LOW>;
-		};
-
-		fan1 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca9552 1 GPIO_ACTIVE_LOW>;
-		};
-
-		fan2 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca9552 2 GPIO_ACTIVE_LOW>;
-		};
-
-		fan3 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca9552 3 GPIO_ACTIVE_LOW>;
-		};
-
-		fan4 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca9552 4 GPIO_ACTIVE_LOW>;
-		};
-
-		fan5 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca9552 5 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	fsi: gpio-fsi {
-		compatible = "fsi-master-gpio", "fsi-master";
-		#address-cells = <2>;
-		#size-cells = <0>;
-		no-gpio-delays;
-
-		clock-gpios = <&gpio ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>;
-		data-gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_HIGH>;
-		mux-gpios = <&gpio ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>;
-		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
-		trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
-	};
-	iio-hwmon-12v {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 0>;
-	};
-
-	iio-hwmon-5v {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 1>;
-	};
-
-	iio-hwmon-3v {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 2>;
-	};
-
-	iio-hwmon-vdd0 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 3>;
-	};
-
-	iio-hwmon-vdd1 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 4>;
-	};
-
-	iio-hwmon-vcs0 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 5>;
-	};
-
-	iio-hwmon-vcs1 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 6>;
-	};
-
-	iio-hwmon-vdn0 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 7>;
-	};
-
-	iio-hwmon-vdn1 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 8>;
-	};
-
-	iio-hwmon-vio0 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 9>;
-	};
-
-	iio-hwmon-vio1 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 10>;
-	};
-
-	iio-hwmon-vddra {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 11>;
-	};
-
-	iio-hwmon-battery {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 12>;
-	};
-
-	iio-hwmon-vddrb {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 13>;
-	};
-
-	iio-hwmon-vddrc {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 14>;
-	};
-
-	iio-hwmon-vddrd {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 15>;
-	};
-};
-
-&pwm_tacho {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
-		&pinctrl_pwm2_default &pinctrl_pwm3_default
-		&pinctrl_pwm4_default &pinctrl_pwm5_default>;
-
-	fan@0 {
-		reg = <0x00>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
-	};
-
-	fan@1 {
-		reg = <0x01>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
-	};
-
-	fan@2 {
-		reg = <0x02>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
-	};
-
-	fan@3 {
-		reg = <0x03>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
-	};
-
-	fan@4 {
-		reg = <0x04>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
-	};
-
-	fan@5 {
-		reg = <0x05>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
-	};
-
-	fan@6 {
-		reg = <0x00>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
-	};
-
-	fan@7 {
-		reg = <0x01>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
-	};
-
-	fan@8 {
-		reg = <0x02>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
-	};
-
-	fan@9 {
-		reg = <0x03>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
-	};
-
-	fan@10 {
-		reg = <0x04>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
-	};
-
-	fan@11 {
-		reg = <0x05>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
-	};
-};
-
-&gpio {
-	gpio-line-names =
-	/*A0-A7*/	"","cfam-reset","","","","","","",
-	/*B0-B7*/	"","","","","","","","",
-	/*C0-C7*/	"","","","","","","","",
-	/*D0-D7*/	"fsi-enable","","","","","","","",
-	/*E0-E7*/	"","","","","","fsi-mux","fsi-clock","fsi-data",
-	/*F0-F7*/	"","id-button","","","","","air-water","",
-	/*G0-G7*/	"","","","","","","","",
-	/*H0-H7*/	"","","","","","","","",
-	/*I0-I7*/	"","","","","","","","",
-	/*J0-J7*/	"","","checkstop","","","","","",
-	/*K0-K7*/	"","","","","","","","",
-	/*L0-L7*/	"","","","","","","","",
-	/*M0-M7*/	"","","","","","","","",
-	/*N0-N7*/	"","","","","","","","",
-	/*O0-O7*/	"","","","","","","","",
-	/*P0-P7*/	"","","","","","","","",
-	/*Q0-Q7*/	"","","","","","","","",
-	/*R0-R7*/	"","","fsi-trans","","","","","",
-	/*S0-S7*/	"","","","","","","","",
-	/*T0-T7*/	"","","","","","","","",
-	/*U0-U7*/	"","","","","","","","",
-	/*V0-V7*/	"","","","","","","","",
-	/*W0-W7*/	"","","","","","","","",
-	/*X0-X7*/	"","","","","","","","",
-	/*Y0-Y7*/	"","","","","","","","",
-	/*Z0-Z7*/	"presence-ps1","","presence-ps0","","","","","",
-	/*AA0-AA7*/	"led-front-fault","power-button","led-front-id","","","","","",
-	/*AB0-AB7*/	"","","","","","","","",
-	/*AC0-AC7*/	"","","","","","","","";
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		label = "bmc";
-		m25p,fast-read;
-		spi-max-frequency = <50000000>;
-		partitions {
-			#address-cells = < 1 >;
-			#size-cells = < 1 >;
-			compatible = "fixed-partitions";
-			u-boot@0 {
-				reg = < 0 0x60000 >;
-				label = "u-boot";
-			};
-			u-boot-env@60000 {
-				reg = < 0x60000 0x20000 >;
-				label = "u-boot-env";
-			};
-			obmc-ubi@80000 {
-				reg = < 0x80000 0x1F80000 >;
-				label = "obmc-ubi";
-			};
-		};
-	};
-	flash@1 {
-		status = "okay";
-		label = "alt-bmc";
-		m25p,fast-read;
-		spi-max-frequency = <50000000>;
-		partitions {
-			#address-cells = < 1 >;
-			#size-cells = < 1 >;
-			compatible = "fixed-partitions";
-			u-boot@0 {
-				reg = < 0 0x60000 >;
-				label = "alt-u-boot";
-			};
-			u-boot-env@60000 {
-				reg = < 0x60000 0x20000 >;
-				label = "alt-u-boot-env";
-			};
-			obmc-ubi@80000 {
-				reg = < 0x80000 0x1F80000 >;
-				label = "alt-obmc-ubi";
-			};
-		};
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-
-	flash@0 {
-		status = "okay";
-		label = "pnor";
-		m25p,fast-read;
-		spi-max-frequency = <100000000>;
-	};
-};
-
-&lpc_ctrl {
-	status = "okay";
-	memory-region = <&flash_memory>;
-	flash = <&spi1>;
-};
-
-&uart1 {
-	/* Rear RS-232 connector */
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd1_default
-			&pinctrl_rxd1_default
-			&pinctrl_nrts1_default
-			&pinctrl_ndtr1_default
-			&pinctrl_ndsr1_default
-			&pinctrl_ncts1_default
-			&pinctrl_ndcd1_default
-			&pinctrl_nri1_default>;
-};
-
-&uart2 {
-	/* APSS */
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&mac0 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii1_default>;
-	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
-		 <&syscon ASPEED_CLK_MAC1RCLK>;
-	clock-names = "MACCLK", "RCLK";
-	use-ncsi;
-};
-
-&mac1 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
-};
-
-&i2c0 {
-	status = "disabled";
-};
-
-&i2c1 {
-	status = "disabled";
-};
-
-&i2c2 {
-	status = "okay";
-
-	/* SAMTEC P0 */
-	/* SAMTEC P1 */
-
-};
-
-&i2c3 {
-	status = "okay";
-
-	/* APSS */
-	/* CPLD */
-
-	/* PCA9516 (repeater) ->
-	 *    CLK Buffer 9FGS9092
-	 *    CLK Buffer 9DBL0651BKILFT
-	 *    CLK Buffer 9DBL0651BKILFT
-	 *    Power Supply 0
-	 *    Power Supply 1
-	 *    PCA 9552 LED
-	 */
-
-	power-supply@58 {
-		compatible = "ibm,cffps1";
-		reg = <0x58>;
-	};
-
-	power-supply@5b {
-		compatible = "ibm,cffps1";
-		reg = <0x5b>;
-	};
-
-	pca9552: pca9552@60 {
-		compatible = "nxp,pca9552";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@8 {
-			reg = <8>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@9 {
-			reg = <9>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@10 {
-			reg = <10>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@11 {
-			reg = <11>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@12 {
-			reg = <12>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@13 {
-			reg = <13>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@14 {
-			reg = <14>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@15 {
-			reg = <15>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-	};
-
-};
-
-&i2c4 {
-	status = "okay";
-
-	/* CP0 VDD & VCS : IR35221 */
-	/* CP0 VDN : IR35221 */
-	/* CP0 VIO : IR38064 */
-	/* CP0 VDDR : PXM1330 */
-
-	ir35221@70 {
-		compatible = "infineon,ir35221";
-		reg = <0x70>;
-	};
-
-	ir35221@72 {
-		compatible = "infineon,ir35221";
-		reg = <0x72>;
-	};
-
-};
-
-&i2c5 {
-	status = "okay";
-
-	/* CP0 VDD & VCS : IR35221 */
-	/* CP0 VDN : IR35221 */
-	/* CP0 VIO : IR38064 */
-	/* CP0 VDDR : PXM1330 */
-
-	ir35221@70 {
-		compatible = "infineon,ir35221";
-		reg = <0x70>;
-	};
-
-	ir35221@72 {
-		compatible = "infineon,ir35221";
-		reg = <0x72>;
-	};
-
-};
-
-&i2c6 {
-	status = "okay";
-
-	/* pca9548 -> NVMe1 to 8 */
-
-	pca9548@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-
-		bus7_mux223: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		bus7_mux224: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		bus7_mux225: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		bus7_mux226: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		bus7_mux227: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		bus7_mux228: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		bus7_mux229: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		bus7_mux230: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-
-};
-
-&i2c7 {
-	status = "okay";
-
-	/* pca9548 -> NVMe9 to 16 */
-
-	pca9548@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-
-		bus6_mux215: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		bus6_mux216: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		bus6_mux217: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		bus6_mux218: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		bus6_mux219: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		bus6_mux220: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		bus6_mux221: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		bus6_mux222: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-
-};
-
-&i2c8 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-};
-
-&i2c9 {
-	status = "okay";
-
-	/* pca9545 Riser ->
-	*	PCIe x8  Slot3
-	*	PCIe x16 slot4
-	*	PCIe x8  slot5
-	*	I2C BMC RISER PCA9554
-	*	BMC SCL/SDA PCA9554
-	*	PCA9554
-	*/
-
-	/* pca9545 ->
-	*	PCIe x16 Slot1
-	*	PCIe x8  slot2
-	*	PEX8748
-	*/
-
-	pca9545riser@70 {
-		compatible = "nxp,pca9545";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-
-		i2c-mux-idle-disconnect;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		bus9_mux231: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			tca9554@39 {
-				compatible = "ti,tca9554";
-				reg = <0x39>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				smbus0-hog {
-					gpio-hog;
-					gpios = <4 GPIO_ACTIVE_HIGH>;
-					output-high;
-					line-name = "smbus0";
-				};
-			};
-
-			tmp431@4c {
-				compatible = "ti,tmp401";
-				reg = <0x4c>;
-			};
-		};
-
-		bus9_mux232: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			tca9554@39 {
-				compatible = "ti,tca9554";
-				reg = <0x39>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				smbus1-hog {
-					gpio-hog;
-					gpios = <4 GPIO_ACTIVE_HIGH>;
-					output-high;
-					line-name = "smbus1";
-				};
-			};
-
-			tmp431@4c {
-				compatible = "ti,tmp401";
-				reg = <0x4c>;
-			};
-		};
-
-		bus9_mux233: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		bus9_mux234: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-	};
-
-	pca9545@71 {
-		compatible = "nxp,pca9545";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x71>;
-
-		i2c-mux-idle-disconnect;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		bus9_mux235: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			tca9554@39 {
-				compatible = "ti,tca9554";
-				reg = <0x39>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				smbus2-hog {
-					gpio-hog;
-					gpios = <4 GPIO_ACTIVE_HIGH>;
-					output-high;
-					line-name = "smbus2";
-				};
-			};
-
-			tmp431@4c {
-				compatible = "ti,tmp401";
-				reg = <0x4c>;
-			};
-		};
-
-		bus9_mux236: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			tca9554@39 {
-				compatible = "ti,tca9554";
-				reg = <0x39>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				smbus3-hog {
-					gpio-hog;
-					gpios = <4 GPIO_ACTIVE_HIGH>;
-					output-high;
-					line-name = "smbus3";
-				};
-			};
-
-			tmp431@4c {
-				compatible = "ti,tmp401";
-				reg = <0x4c>;
-			};
-		};
-
-		bus9_mux237: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		bus9_mux238: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-	};
-};
-
-&i2c10 {
-	status = "okay";
-
-	/* pca9545 Riser ->
-	* 	PCIe x8  Slot8
-	* 	PCIe x16 slot9
-	* 	PCIe x8  slot10
-	* 	I2C BMC RISER PCA9554
-	* 	BMC SCL/SDA PCA9554
-	* 	PCA9554
-	*/
-
-	/* pca9545 ->
-	*	PCIe x16 Slot1
-	*	PCIe x8  slot2
-	*	PEX8748
-	*/
-
-	pca9545riser@70 {
-		compatible = "nxp,pca9545";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-
-		i2c-mux-idle-disconnect;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		bus10_mux239: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			tca9554@39 {
-				compatible = "ti,tca9554";
-				reg = <0x39>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				smbus4-hog {
-					gpio-hog;
-					gpios = <4 GPIO_ACTIVE_HIGH>;
-					output-high;
-					line-name = "smbus4";
-				};
-			};
-
-			tmp431@4c {
-				compatible = "ti,tmp401";
-				reg = <0x4c>;
-			};
-		};
-
-		bus10_mux240: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			tca9554@39 {
-				compatible = "ti,tca9554";
-				reg = <0x39>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				smbus5-hog {
-					gpio-hog;
-					gpios = <4 GPIO_ACTIVE_HIGH>;
-					output-high;
-					line-name = "smbus5";
-				};
-			};
-
-			tmp431@4c {
-				compatible = "ti,tmp401";
-				reg = <0x4c>;
-			};
-		};
-
-		bus10_mux241: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		bus10_mux242: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-	};
-
-	pca9545@71 {
-		compatible = "nxp,pca9545";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x71>;
-
-		i2c-mux-idle-disconnect;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		bus10_mux243: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			tca9554@39 {
-				compatible = "ti,tca9554";
-				reg = <0x39>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				smbus6-hog {
-					gpio-hog;
-					gpios = <4 GPIO_ACTIVE_HIGH>;
-					output-high;
-					line-name = "smbus6";
-				};
-			};
-
-			tmp431@4c {
-				compatible = "ti,tmp401";
-				reg = <0x4c>;
-			};
-		};
-
-		bus10_mux244: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			tca9554@39 {
-				compatible = "ti,tca9554";
-				reg = <0x39>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				smbus7-hog {
-					gpio-hog;
-					gpios = <4 GPIO_ACTIVE_HIGH>;
-					output-high;
-					line-name = "smbus7";
-				};
-			};
-
-			tmp431@4c {
-				compatible = "ti,tmp401";
-				reg = <0x4c>;
-			};
-		};
-
-		bus10_mux245: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		bus10_mux246: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-	};
-};
-
-&i2c11 {
-	status = "okay";
-
-	/* TPM */
-	/* RTC RX8900CE */
-	/* FPGA for power sequence */
-	/* TMP275A */
-	/* TMP275A */
-	/* EMC1462 */
-
-	tpm@57 {
-		compatible = "infineon,slb9645tt";
-		reg = <0x57>;
-	};
-
-	rtc@32 {
-		compatible = "epson,rx8900";
-		reg = <0x32>;
-	};
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	tmp275@49 {
-		compatible = "ti,tmp275";
-		reg = <0x49>;
-	};
-
-	/* chip emc1462 use emc1403 driver */
-	emc1403@4c {
-		compatible = "smsc,emc1403";
-		reg = <0x4c>;
-	};
-
-};
-
-&i2c12 {
-	status = "okay";
-
-	/* pca9545 ->
-	*	SAS BP1
-	*	SAS BP2
-	*	NVMe BP
-	*	M.2 riser
-	*/
-
-	pca9545@70 {
-		compatible = "nxp,pca9545";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		bus12_mux247: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-			};
-		};
-
-		bus12_mux248: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-			};
-		};
-
-		bus12_mux249: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-			};
-		};
-
-		bus12_mux250: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-
-			tmp275@48 {
-				compatible = "ti,tmp275";
-				reg = <0x48>;
-			};
-		};
-
-	};
-
-};
-
-&i2c13 {
-	status = "okay";
-
-	/* pca9548 ->
-	*	NVMe BP
-	*	NVMe HDD17 to 24
-	*/
-
-	pca9548@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		bus13_mux251: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		bus13_mux252: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		bus13_mux253: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		bus13_mux254: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		bus13_mux255: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		bus13_mux256: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		bus13_mux257: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		bus13_mux258: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};
-
-&vuart {
-	status = "okay";
-};
-
-&gfx {
-	status = "okay";
-	memory-region = <&gfx_memory>;
-};
-
-&adc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc0_default
-			&pinctrl_adc1_default
-			&pinctrl_adc2_default
-			&pinctrl_adc3_default
-			&pinctrl_adc4_default
-			&pinctrl_adc5_default
-			&pinctrl_adc6_default
-			&pinctrl_adc7_default
-			&pinctrl_adc8_default
-			&pinctrl_adc9_default
-			&pinctrl_adc10_default
-			&pinctrl_adc11_default
-			&pinctrl_adc12_default
-			&pinctrl_adc13_default
-			&pinctrl_adc14_default
-			&pinctrl_adc15_default>;
-};
-
-&wdt1 {
-	aspeed,reset-type = "none";
-	aspeed,external-signal;
-	aspeed,ext-push-pull;
-	aspeed,ext-active-high;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdtrst1_default>;
-};
-
-&wdt2 {
-	aspeed,alt-boot;
-};
-
-&ibt {
-	status = "okay";
-};
-
-&vhub {
-	status = "okay";
-};
-
-&video {
-	status = "okay";
-	memory-region = <&video_engine_memory>;
-};
-
-#include "ibm-power9-dual.dtsi"
-
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts b/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts
deleted file mode 100644
index 4816486c0c9e..000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts
+++ /dev/null
@@ -1,978 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/dts-v1/;
-#include "aspeed-g5.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-#include <dt-bindings/leds/leds-pca955x.h>
-
-/ {
-	model = "Swift BMC";
-	compatible = "ibm,swift-bmc", "aspeed,ast2500";
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlycon";
-	};
-
-	memory@80000000 {
-		reg = <0x80000000 0x20000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		flash_memory: region@98000000 {
-			no-map;
-			reg = <0x98000000 0x04000000>; /* 64M */
-		};
-
-		gfx_memory: framebuffer {
-			size = <0x01000000>;
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		air-water {
-			label = "air-water";
-			gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(B, 5)>;
-		};
-
-		checkstop {
-			label = "checkstop";
-			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(J, 2)>;
-		};
-
-		ps0-presence {
-			label = "ps0-presence";
-			gpios = <&gpio ASPEED_GPIO(R, 7) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(R, 7)>;
-		};
-
-		ps1-presence {
-			label = "ps1-presence";
-			gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(N, 0)>;
-		};
-
-		oppanel-presence {
-			label = "oppanel-presence";
-			gpios = <&gpio ASPEED_GPIO(A, 7) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(A, 7)>;
-		};
-
-		opencapi-riser-presence {
-			label = "opencapi-riser-presence";
-			gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(I, 0)>;
-		};
-	};
-
-	iio-hwmon-battery {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 12>;
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		poll-interval = <1000>;
-
-		scm0-presence {
-			label = "scm0-presence";
-			gpios = <&pca9552 6 GPIO_ACTIVE_LOW>;
-			linux,code = <6>;
-		};
-
-		scm1-presence {
-			label = "scm1-presence";
-			gpios = <&pca9552 7 GPIO_ACTIVE_LOW>;
-			linux,code = <7>;
-		};
-
-		cpu0vrm-presence {
-			label = "cpu0vrm-presence";
-			gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
-			linux,code = <12>;
-		};
-
-		cpu1vrm-presence {
-			label = "cpu1vrm-presence";
-			gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
-			linux,code = <13>;
-		};
-
-		fan0-presence {
-			label = "fan0-presence";
-			gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
-			linux,code = <5>;
-		};
-
-		fan1-presence {
-			label = "fan1-presence";
-			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
-			linux,code = <6>;
-		};
-
-		fan2-presence {
-			label = "fan2-presence";
-			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
-			linux,code = <7>;
-		};
-
-		fan3-presence {
-			label = "fan3-presence";
-			gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
-			linux,code = <8>;
-		};
-
-		fanboost-presence {
-			label = "fanboost-presence";
-			gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
-			linux,code = <9>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		fan0 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca0 0 GPIO_ACTIVE_LOW>;
-		};
-
-		fan1 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca0 1 GPIO_ACTIVE_LOW>;
-		};
-
-		fan2 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca0 2 GPIO_ACTIVE_LOW>;
-		};
-
-		fan3 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca0 3 GPIO_ACTIVE_LOW>;
-		};
-
-		fanboost {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca0 4 GPIO_ACTIVE_LOW>;
-		};
-
-		front-fault {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca1 2 GPIO_ACTIVE_LOW>;
-		};
-
-		front-power {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca1 3 GPIO_ACTIVE_LOW>;
-		};
-
-		front-id {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca1 0 GPIO_ACTIVE_LOW>;
-		};
-
-		rear-fault {
-			gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>;
-		};
-
-		rear-id {
-			gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	fsi: gpio-fsi {
-		compatible = "fsi-master-gpio", "fsi-master";
-		#address-cells = <2>;
-		#size-cells = <0>;
-		no-gpio-delays;
-
-		clock-gpios = <&gpio ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>;
-		data-gpios = <&gpio ASPEED_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
-		mux-gpios = <&gpio ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
-		enable-gpios = <&gpio ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
-		trans-gpios = <&gpio ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>;
-	};
-
-	iio-hwmon-dps310 {
-		compatible = "iio-hwmon";
-		io-channels = <&dps 0>;
-	};
-
-};
-
-&fmc {
-	status = "okay";
-
-	flash@0 {
-		status = "okay";
-		label = "bmc";
-		m25p,fast-read;
-		spi-max-frequency = <100000000>;
-		partitions {
-			#address-cells = < 1 >;
-			#size-cells = < 1 >;
-			compatible = "fixed-partitions";
-			u-boot@0 {
-				reg = < 0 0x60000 >;
-				label = "u-boot";
-			};
-			u-boot-env@60000 {
-				reg = < 0x60000 0x20000 >;
-				label = "u-boot-env";
-			};
-			obmc-ubi@80000 {
-				reg = < 0x80000 0x7F80000>;
-				label = "obmc-ubi";
-			};
-		};
-	};
-
-	flash@1 {
-		status = "okay";
-		label = "alt-bmc";
-		m25p,fast-read;
-		spi-max-frequency = <100000000>;
-		partitions {
-			#address-cells = < 1 >;
-			#size-cells = < 1 >;
-			compatible = "fixed-partitions";
-			u-boot@0 {
-				reg = < 0 0x60000 >;
-				label = "alt-u-boot";
-			};
-			u-boot-env@60000 {
-				reg = < 0x60000 0x20000 >;
-				label = "alt-u-boot-env";
-			};
-			obmc-ubi@80000 {
-				reg = < 0x80000 0x7F80000>;
-				label = "alt-obmc-ubi";
-			};
-		};
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-
-	flash@0 {
-		status = "okay";
-		label = "pnor";
-		m25p,fast-read;
-		spi-max-frequency = <100000000>;
-	};
-};
-
-&uart1 {
-	/* Rear RS-232 connector */
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd1_default
-			&pinctrl_rxd1_default
-			&pinctrl_nrts1_default
-			&pinctrl_ndtr1_default
-			&pinctrl_ndsr1_default
-			&pinctrl_ncts1_default
-			&pinctrl_ndcd1_default
-			&pinctrl_nri1_default>;
-};
-
-&uart2 {
-	/* APSS */
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&lpc_ctrl {
-	status = "okay";
-	memory-region = <&flash_memory>;
-	flash = <&spi1>;
-};
-
-&mac0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii1_default>;
-	use-ncsi;
-	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
-		 <&syscon ASPEED_CLK_MAC1RCLK>;
-	clock-names = "MACCLK", "RCLK";
-};
-
-&i2c2 {
-	status = "okay";
-
-	/* MUX ->
-	 *    Samtec 1
-	 *    Samtec 2
-	 */
-};
-
-&i2c3 {
-	status = "okay";
-
-	max31785@52 {
-		compatible = "maxim,max31785a";
-		reg = <0x52>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		fan@0 {
-			compatible = "pmbus-fan";
-			reg = <0>;
-			tach-pulses = <2>;
-			maxim,fan-rotor-input = "tach";
-			maxim,fan-pwm-freq = <25000>;
-			maxim,fan-no-watchdog;
-			maxim,fan-no-fault-ramp;
-			maxim,fan-ramp = <2>;
-			maxim,fan-fault-pin-mon;
-		};
-
-		fan@1 {
-			compatible = "pmbus-fan";
-			reg = <1>;
-			tach-pulses = <2>;
-			maxim,fan-rotor-input = "tach";
-			maxim,fan-pwm-freq = <25000>;
-			maxim,fan-no-watchdog;
-			maxim,fan-no-fault-ramp;
-			maxim,fan-ramp = <2>;
-			maxim,fan-fault-pin-mon;
-		};
-
-		fan@2 {
-			compatible = "pmbus-fan";
-			reg = <2>;
-			tach-pulses = <2>;
-			maxim,fan-rotor-input = "tach";
-			maxim,fan-pwm-freq = <25000>;
-			maxim,fan-no-watchdog;
-			maxim,fan-no-fault-ramp;
-			maxim,fan-ramp = <2>;
-			maxim,fan-fault-pin-mon;
-		};
-
-		fan@3 {
-			compatible = "pmbus-fan";
-			reg = <3>;
-			tach-pulses = <2>;
-			maxim,fan-rotor-input = "tach";
-			maxim,fan-pwm-freq = <25000>;
-			maxim,fan-no-watchdog;
-			maxim,fan-no-fault-ramp;
-			maxim,fan-ramp = <2>;
-			maxim,fan-fault-pin-mon;
-		};
-
-		fan@4 {
-			compatible = "pmbus-fan";
-			reg = <4>;
-			tach-pulses = <2>;
-			maxim,fan-rotor-input = "tach";
-			maxim,fan-pwm-freq = <25000>;
-			maxim,fan-no-watchdog;
-			maxim,fan-no-fault-ramp;
-			maxim,fan-ramp = <2>;
-			maxim,fan-fault-pin-mon;
-		};
-	};
-
-	pca0: pca9552@60 {
-		compatible = "nxp,pca9552";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@8 {
-			reg = <8>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@9 {
-			reg = <9>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@10 {
-			reg = <10>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@11 {
-			reg = <11>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@12 {
-			reg = <12>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@13 {
-			reg = <13>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@14 {
-			reg = <14>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@15 {
-			reg = <15>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-	};
-
-	power-supply@68 {
-		compatible = "ibm,cffps2";
-		reg = <0x68>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-
-	power-supply@69 {
-		compatible = "ibm,cffps2";
-		reg = <0x69>;
-	};
-
-	eeprom@51 {
-		compatible = "atmel,24c64";
-		reg = <0x51>;
-	};
-};
-
-&i2c7 {
-	status = "okay";
-
-	dps: dps310@76 {
-		compatible = "infineon,dps310";
-		reg = <0x76>;
-		#io-channel-cells = <0>;
-	};
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	si7021a20@20 {
-		compatible = "si,si7021a20";
-		reg = <0x20>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-
-	pca1: pca9551@60 {
-		compatible = "nxp,pca9551";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-	};
-};
-
-&i2c8 {
-	status = "okay";
-
-	pca9552: pca9552@60 {
-		compatible = "nxp,pca9552";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N",
-			"GPU0_TH_OVERT_N_BUFF",	"GPU1_TH_OVERT_N_BUFF",
-			"GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF",
-			"P9_SCM0_PRES",	"P9_SCM1_PRES",
-			"GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF",
-			"GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF",
-			"PRESENT_VRM_CP0_N", "PRESENT_VRM_CP1_N",
-			"12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N";
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@8 {
-			reg = <8>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@9 {
-			reg = <9>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@10 {
-			reg = <10>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@11 {
-			reg = <11>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@12 {
-			reg = <12>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@13 {
-			reg = <13>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@14 {
-			reg = <14>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@15 {
-			reg = <15>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-	};
-
-	rtc@32 {
-		compatible = "epson,rx8900";
-		reg = <0x32>;
-	};
-
-	eeprom@51 {
-		compatible = "atmel,24c64";
-		reg = <0x51>;
-	};
-
-	ucd90160@64 {
-		compatible = "ti,ucd90160";
-		reg = <0x64>;
-	};
-};
-
-&i2c9 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-
-	tmp423a@4c {
-		compatible = "ti,tmp423";
-		reg = <0x4c>;
-	};
-
-	ir35221@71 {
-		compatible = "infineon,ir35221";
-		reg = <0x71>;
-	};
-
-	ir35221@72 {
-		compatible = "infineon,ir35221";
-		reg = <0x72>;
-	};
-
-	pca2: pca9539@74 {
-		compatible = "nxp,pca9539";
-		reg = <0x74>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio@0 {
-			reg = <0>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-		};
-
-		gpio@8 {
-			reg = <8>;
-		};
-
-		gpio@9 {
-			reg = <9>;
-		};
-
-		gpio@10 {
-			reg = <10>;
-		};
-
-		gpio@11 {
-			reg = <11>;
-		};
-
-		gpio@12 {
-			reg = <12>;
-		};
-
-		gpio@13 {
-			reg = <13>;
-		};
-
-		gpio@14 {
-			reg = <14>;
-		};
-
-		gpio@15 {
-			reg = <15>;
-		};
-	};
-};
-
-&i2c10 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-
-	tmp423a@4c {
-		compatible = "ti,tmp423";
-		reg = <0x4c>;
-	};
-
-	ir35221@71 {
-		compatible = "infineon,ir35221";
-		reg = <0x71>;
-	};
-
-	ir35221@72 {
-		compatible = "infineon,ir35221";
-		reg = <0x72>;
-	};
-
-	pca3: pca9539@74 {
-		compatible = "nxp,pca9539";
-		reg = <0x74>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio@0 {
-			reg = <0>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-		};
-
-		gpio@8 {
-			reg = <8>;
-		};
-
-		gpio@9 {
-			reg = <9>;
-		};
-
-		gpio@10 {
-			reg = <10>;
-		};
-
-		gpio@11 {
-			reg = <11>;
-		};
-
-		gpio@12 {
-			reg = <12>;
-		};
-
-		gpio@13 {
-			reg = <13>;
-		};
-
-		gpio@14 {
-			reg = <14>;
-		};
-
-		gpio@15 {
-			reg = <15>;
-		};
-	};
-};
-
-&i2c11 {
-	/* MUX
-	 *   -> PCIe Slot 0
-	 *   -> PCIe Slot 1
-	 *   -> PCIe Slot 2
-	 *   -> PCIe Slot 3
-	 */
-	status = "okay";
-};
-
-&i2c12 {
-	status = "okay";
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	tmp275@4a {
-		compatible = "ti,tmp275";
-		reg = <0x4a>;
-	};
-};
-
-&i2c13 {
-	status = "okay";
-};
-
-&vuart {
-	status = "okay";
-};
-
-&gfx {
-	status = "okay";
-	memory-region = <&gfx_memory>;
-};
-
-&pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-};
-
-&wdt1 {
-	aspeed,reset-type = "none";
-	aspeed,external-signal;
-	aspeed,ext-push-pull;
-	aspeed,ext-active-high;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdtrst1_default>;
-};
-
-&wdt2 {
-	aspeed,alt-boot;
-};
-
-&ibt {
-	status = "okay";
-};
-
-&adc {
-	status = "okay";
-};
-
-&sdmmc {
-       status = "okay";
-};
-
-&sdhci1 {
-       status = "okay";
-
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_sd2_default>;
-};
-
-#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
new file mode 100644
index 000000000000..9adf9278dc94
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_ASPEED) += \
+	aspeed-ast2500-evb.dtb \
+	aspeed-ast2600-evb-a1.dtb \
+	aspeed-ast2600-evb.dtb \
+	aspeed-bmc-amd-daytonax.dtb \
+	aspeed-bmc-amd-ethanolx.dtb \
+	aspeed-bmc-ampere-mtjade.dtb \
+	aspeed-bmc-ampere-mtjefferson.dtb \
+	aspeed-bmc-ampere-mtmitchell.dtb \
+	aspeed-bmc-arm-stardragon4800-rep2.dtb \
+	aspeed-bmc-asrock-e3c246d4i.dtb \
+	aspeed-bmc-asrock-e3c256d4i.dtb \
+	aspeed-bmc-asrock-romed8hm3.dtb \
+	aspeed-bmc-asrock-spc621d8hm3.dtb \
+	aspeed-bmc-asrock-x570d4u.dtb \
+	aspeed-bmc-asus-x4tf.dtb \
+	aspeed-bmc-bytedance-g220a.dtb \
+	aspeed-bmc-delta-ahe50dc.dtb \
+	aspeed-bmc-facebook-bletchley.dtb \
+	aspeed-bmc-facebook-catalina.dtb \
+	aspeed-bmc-facebook-clemente.dtb \
+	aspeed-bmc-facebook-cmm.dtb \
+	aspeed-bmc-facebook-darwin.dtb \
+	aspeed-bmc-facebook-elbert.dtb \
+	aspeed-bmc-facebook-fuji-data64.dtb \
+	aspeed-bmc-facebook-fuji.dtb \
+	aspeed-bmc-facebook-galaxy100.dtb \
+	aspeed-bmc-facebook-greatlakes.dtb \
+	aspeed-bmc-facebook-harma.dtb \
+	aspeed-bmc-facebook-minerva.dtb \
+	aspeed-bmc-facebook-minipack.dtb \
+	aspeed-bmc-facebook-santabarbara.dtb \
+	aspeed-bmc-facebook-tiogapass.dtb \
+	aspeed-bmc-facebook-wedge40.dtb \
+	aspeed-bmc-facebook-wedge100.dtb \
+	aspeed-bmc-facebook-wedge400-data64.dtb \
+	aspeed-bmc-facebook-wedge400.dtb \
+	aspeed-bmc-facebook-yamp.dtb \
+	aspeed-bmc-facebook-yosemitev2.dtb \
+	aspeed-bmc-facebook-yosemite4.dtb \
+	aspeed-bmc-facebook-yosemite5.dtb \
+	aspeed-bmc-ibm-balcones.dtb \
+	aspeed-bmc-ibm-blueridge.dtb \
+	aspeed-bmc-ibm-bonnell.dtb \
+	aspeed-bmc-ibm-everest.dtb \
+	aspeed-bmc-ibm-fuji.dtb \
+	aspeed-bmc-ibm-rainier.dtb \
+	aspeed-bmc-ibm-rainier-1s4u.dtb \
+	aspeed-bmc-ibm-rainier-4u.dtb \
+	aspeed-bmc-ibm-sbp1.dtb \
+	aspeed-bmc-ibm-system1.dtb \
+	aspeed-bmc-intel-s2600wf.dtb \
+	aspeed-bmc-inspur-fp5280g2.dtb \
+	aspeed-bmc-inspur-nf5280m6.dtb \
+	aspeed-bmc-inspur-on5263m5.dtb \
+	aspeed-bmc-lenovo-hr630.dtb \
+	aspeed-bmc-lenovo-hr855xg2.dtb \
+	aspeed-bmc-microsoft-olympus.dtb \
+	aspeed-bmc-nvidia-gb200nvl-bmc.dtb \
+	aspeed-bmc-opp-lanyang.dtb \
+	aspeed-bmc-opp-mowgli.dtb \
+	aspeed-bmc-opp-nicole.dtb \
+	aspeed-bmc-opp-palmetto.dtb \
+	aspeed-bmc-opp-romulus.dtb \
+	aspeed-bmc-opp-tacoma.dtb \
+	aspeed-bmc-opp-vesnin.dtb \
+	aspeed-bmc-opp-witherspoon.dtb \
+	aspeed-bmc-opp-zaius.dtb \
+	aspeed-bmc-portwell-neptune.dtb \
+	aspeed-bmc-qcom-dc-scm-v1.dtb \
+	aspeed-bmc-quanta-q71l.dtb \
+	aspeed-bmc-quanta-s6q.dtb \
+	aspeed-bmc-supermicro-x11spi.dtb \
+	aspeed-bmc-inventec-starscream.dtb \
+	aspeed-bmc-inventec-transformers.dtb \
+	aspeed-bmc-tyan-s7106.dtb \
+	aspeed-bmc-tyan-s8036.dtb \
+	aspeed-bmc-ufispace-ncplite.dtb \
+	aspeed-bmc-vegman-n110.dtb \
+	aspeed-bmc-vegman-rx20.dtb \
+	aspeed-bmc-vegman-sx20.dtb
diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed/aspeed-ast2500-evb.dts
index 1d24b394ea4c..a497dd135491 100644
--- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-ast2500-evb.dts
@@ -5,7 +5,7 @@
 
 / {
 	model = "AST2500 EVB";
-	compatible = "aspeed,ast2500";
+	compatible = "aspeed,ast2500-evb", "aspeed,ast2500";
 
 	aliases {
 		serial4 = &uart5;
diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb-a1.dts b/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb-a1.dts
index dd7148060c4a..f34a2b1ec2f0 100644
--- a/arch/arm/boot/dts/aspeed-ast2600-evb-a1.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb-a1.dts
@@ -5,6 +5,7 @@
 
 / {
 	model = "AST2600 A1 EVB";
+	compatible = "aspeed,ast2600-evb-a1", "aspeed,ast2600-evb", "aspeed,ast2600";
 
 	/delete-node/regulator-vcc-sdhci0;
 	/delete-node/regulator-vcc-sdhci1;
diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dts
index b7eb552640cb..de83c0eb1d6e 100644
--- a/arch/arm/boot/dts/aspeed-ast2600-evb.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dts
@@ -8,7 +8,7 @@
 
 / {
 	model = "AST2600 EVB";
-	compatible = "aspeed,ast2600";
+	compatible = "aspeed,ast2600-evb", "aspeed,ast2600";
 
 	aliases {
 		serial4 = &uart5;
@@ -23,6 +23,26 @@
 		reg = <0x80000000 0x80000000>;
 	};
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		video_engine_memory: video {
+			size = <0x04000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
 	vcc_sdhci0: regulator-vcc-sdhci0 {
 		compatible = "regulator-fixed";
 		regulator-name = "SDHCI0 Vcc";
@@ -103,7 +123,7 @@
 &mac0 {
 	status = "okay";
 
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-rxid";
 	phy-handle = <&ethphy0>;
 
 	pinctrl-names = "default";
@@ -114,7 +134,7 @@
 &mac1 {
 	status = "okay";
 
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-rxid";
 	phy-handle = <&ethphy1>;
 
 	pinctrl-names = "default";
@@ -162,6 +182,7 @@
 		status = "okay";
 		m25p,fast-read;
 		label = "bmc";
+		spi-rx-bus-width = <4>;
 		spi-max-frequency = <50000000>;
 #include "openbmc-flash-layout-64.dtsi"
 	};
@@ -176,6 +197,7 @@
 		status = "okay";
 		m25p,fast-read;
 		label = "pnor";
+		spi-rx-bus-width = <4>;
 		spi-max-frequency = <100000000>;
 	};
 };
@@ -187,11 +209,6 @@
 
 &i2c0 {
 	status = "okay";
-
-	temp@2e {
-		compatible = "adi,adt7490";
-		reg = <0x2e>;
-	};
 };
 
 &i2c1 {
@@ -220,10 +237,26 @@
 
 &i2c7 {
 	status = "okay";
+
+	temp@2e {
+		compatible = "adi,adt7490";
+		reg = <0x2e>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
 };
 
 &i2c8 {
 	status = "okay";
+
+	lm75@4d {
+		compatible = "national,lm75";
+		reg = <0x4d>;
+	};
 };
 
 &i2c9 {
@@ -300,3 +333,18 @@
 	vqmmc-supply = <&vccq_sdhci1>;
 	clk-phase-sd-hs = <7>, <200>;
 };
+
+&vhub {
+	status = "okay";
+	pinctrl-names = "default";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-amd-daytonax.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-amd-daytonax.dts
new file mode 100644
index 000000000000..64bb9bf92de2
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-amd-daytonax.dts
@@ -0,0 +1,319 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "AMD DaytonaX BMC";
+	compatible = "amd,daytonax-bmc", "aspeed,ast2500";
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	aliases {
+		serial0 = &uart1;
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-fault {
+			gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		led-identify {
+			gpios = <&gpio ASPEED_GPIO(A, 3) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+			<&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>,
+			<&adc 10>, <&adc 11>, <&adc 12>, <&adc 13>, <&adc 14>,
+			<&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&uart1 {
+	//Host Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		&pinctrl_rxd1_default
+		&pinctrl_nrts1_default
+		&pinctrl_ndtr1_default
+		&pinctrl_ndsr1_default
+		&pinctrl_ncts1_default
+		&pinctrl_ndcd1_default
+		&pinctrl_nri1_default>;
+};
+
+&uart5 {
+	//BMC Console
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x3f8>;
+	aspeed,lpc-interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		&pinctrl_adc1_default
+		&pinctrl_adc2_default
+		&pinctrl_adc3_default
+		&pinctrl_adc4_default
+		&pinctrl_adc5_default
+		&pinctrl_adc6_default
+		&pinctrl_adc7_default
+		&pinctrl_adc8_default
+		&pinctrl_adc9_default
+		&pinctrl_adc10_default
+		&pinctrl_adc11_default
+		&pinctrl_adc12_default
+		&pinctrl_adc13_default
+		&pinctrl_adc14_default
+		&pinctrl_adc15_default>;
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"","","led-fault","led-identify","","","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"id-button","","","","","","","",
+	/*D0-D7*/	"","","ASSERT_BMC_READY","","","","","",
+	/*E0-E7*/	"reset-button","reset-control","power-button","power-control","",
+			"power-good","power-ok","",
+	/*F0-F7*/	"","","","","","","BATTERY_DETECT","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"","","","","","","","",
+	/*AB0-AB7*/	"FM_BMC_READ_SPD_TEMP","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>, <0x81>;
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+		&pinctrl_pwm1_default
+		&pinctrl_pwm2_default
+		&pinctrl_pwm3_default
+		&pinctrl_pwm4_default
+		&pinctrl_pwm5_default
+		&pinctrl_pwm6_default
+		&pinctrl_pwm7_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	fan@6 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+
+	fan@8 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+	};
+
+	fan@9 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+	};
+
+	fan@10 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
+	};
+
+	fan@11 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
+	};
+
+	fan@12 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
+	};
+
+	fan@13 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
+	};
+
+	fan@14 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0e>;
+	};
+
+	fan@15 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0f>;
+	};
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&vhub {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-amd-ethanolx.dts
index 79d17841b3d7..6bded774c457 100644
--- a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-amd-ethanolx.dts
@@ -5,6 +5,7 @@
 
 #include "aspeed-g5.dtsi"
 #include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	model = "AMD EthanolX BMC";
@@ -58,10 +59,22 @@
 	flash@0 {
 		status = "okay";
 		m25p,fast-read;
+		label = "bmc";
 		#include "openbmc-flash-layout.dtsi"
 	};
 };
 
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bios";
+		spi-max-frequency = <100000000>;
+	};
+};
 
 &mac0 {
 	status = "okay";
@@ -78,7 +91,9 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_txd1_default
-		     &pinctrl_rxd1_default>;
+		     &pinctrl_rxd1_default
+		     &pinctrl_nrts1_default
+		     &pinctrl_ncts1_default>;
 };
 
 &uart5 {
@@ -159,6 +174,11 @@
 //24LC128 EEPROM
 &i2c3 {
 	status = "okay";
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <64>;
+	};
 };
 
 //P0 Power regulators
@@ -256,6 +276,12 @@
 	status = "okay";
 };
 
+&vuart {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x3f8>;
+	aspeed,lpc-interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+};
+
 &pwm_tacho {
 	status = "okay";
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dts
new file mode 100644
index 000000000000..263702599767
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dts
@@ -0,0 +1,834 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Ampere Mt. Jade BMC";
+	compatible = "ampere,mtjade-bmc", "aspeed,ast2500";
+
+	aliases {
+		/*
+		 *  i2c bus 50-57 assigned to NVMe slot 0-7
+		 */
+		i2c50 = &nvmeslot_0;
+		i2c51 = &nvmeslot_1;
+		i2c52 = &nvmeslot_2;
+		i2c53 = &nvmeslot_3;
+		i2c54 = &nvmeslot_4;
+		i2c55 = &nvmeslot_5;
+		i2c56 = &nvmeslot_6;
+		i2c57 = &nvmeslot_7;
+
+		/*
+		 *  i2c bus 60-67 assigned to NVMe slot 8-15
+		 */
+		i2c60 = &nvmeslot_8;
+		i2c61 = &nvmeslot_9;
+		i2c62 = &nvmeslot_10;
+		i2c63 = &nvmeslot_11;
+		i2c64 = &nvmeslot_12;
+		i2c65 = &nvmeslot_13;
+		i2c66 = &nvmeslot_14;
+		i2c67 = &nvmeslot_15;
+
+		/*
+		 *  i2c bus 70-77 assigned to NVMe slot 16-23
+		 */
+		i2c70 = &nvmeslot_16;
+		i2c71 = &nvmeslot_17;
+		i2c72 = &nvmeslot_18;
+		i2c73 = &nvmeslot_19;
+		i2c74 = &nvmeslot_20;
+		i2c75 = &nvmeslot_21;
+		i2c76 = &nvmeslot_22;
+		i2c77 = &nvmeslot_23;
+
+		/*
+		 *  i2c bus 80-81 assigned to NVMe M2 slot 0-1
+		 */
+		i2c80 = &nvme_m2_0;
+		i2c81 = &nvme_m2_1;
+
+		/*
+		 *  i2c bus 82 assigned to OCP slot
+		 */
+		i2c82 = &ocpslot;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		fault {
+			gpios = <&gpio ASPEED_GPIO(B, 6) GPIO_ACTIVE_HIGH>;
+		};
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(Q, 6) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpioA0mux: mux-controller {
+		compatible = "gpio-mux";
+		#mux-control-cells = <0>;
+		mux-gpios = <&gpio ASPEED_GPIO(A, 0) GPIO_ACTIVE_LOW>;
+	};
+
+	adc0mux: adc0mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 0>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc1mux: adc1mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 1>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc2mux: adc2mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 2>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc3mux: adc3mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 3>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc4mux: adc4mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 4>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc5mux: adc5mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 5>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc6mux: adc6mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 6>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc7mux: adc7mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 7>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc8mux: adc8mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 8>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc9mux: adc9mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 9>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc10mux: adc10mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 10>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc11mux: adc11mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 11>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc12mux: adc12mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 12>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc13mux: adc13mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 13>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0mux 0>, <&adc0mux 1>,
+			<&adc1mux 0>, <&adc1mux 1>,
+			<&adc2mux 0>, <&adc2mux 1>,
+			<&adc3mux 0>, <&adc3mux 1>,
+			<&adc4mux 0>, <&adc4mux 1>,
+			<&adc5mux 0>, <&adc5mux 1>,
+			<&adc6mux 0>, <&adc6mux 1>,
+			<&adc7mux 0>, <&adc7mux 1>,
+			<&adc8mux 0>, <&adc8mux 1>,
+			<&adc9mux 0>, <&adc9mux 1>,
+			<&adc10mux 0>, <&adc10mux 1>,
+			<&adc11mux 0>, <&adc11mux 1>,
+			<&adc12mux 0>, <&adc12mux 1>,
+			<&adc13mux 0>, <&adc13mux 1>,
+			<&adc 14>, <&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		/* spi-max-frequency = <50000000>; */
+#include "openbmc-flash-layout-64.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		/* spi-max-frequency = <100000000>; */
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			uefi@400000 {
+				reg = <0x400000 0x1C00000>;
+				label = "pnor-uefi";
+			};
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			 &pinctrl_rxd1_default
+			 &pinctrl_ncts1_default
+			 &pinctrl_nrts1_default>;
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+			 &pinctrl_rxd2_default>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd3_default
+			 &pinctrl_rxd3_default>;
+};
+
+&uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd4_default
+			 &pinctrl_rxd4_default>;
+};
+
+/* The BMC's uart */
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+	ssif-bmc@10 {
+		compatible = "ssif-bmc";
+		reg = <0x10>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+	smpro@4f {
+		compatible = "ampere,smpro";
+		reg = <0x4f>;
+	};
+	smpro@4e {
+		compatible = "ampere,smpro";
+		reg = <0x4e>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	eeprom@50 {
+		compatible = "microchip,24c64", "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	inlet_mem2: tmp175@28 {
+		compatible = "ti,tmp175";
+		reg = <0x28>;
+	};
+
+	inlet_cpu: tmp175@29 {
+		compatible = "ti,tmp175";
+		reg = <0x29>;
+	};
+
+	inlet_mem1: tmp175@2a {
+		compatible = "ti,tmp175";
+		reg = <0x2a>;
+	};
+
+	outlet_cpu: tmp175@2b {
+		compatible = "ti,tmp175";
+		reg = <0x2b>;
+	};
+
+	outlet1: tmp175@2c {
+		compatible = "ti,tmp175";
+		reg = <0x2c>;
+	};
+
+	outlet2: tmp175@2d {
+		compatible = "ti,tmp175";
+		reg = <0x2d>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		ocpslot: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			ocpslot_temp: temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+
+		nvmeslot_0_7: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+		i2c-mux-idle-disconnect;
+
+		nvmeslot_8_15: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+
+		nvmeslot_16_23: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9545";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x72>;
+		i2c-mux-idle-disconnect;
+
+		nvme_m2_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+
+		nvme_m2_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+	};
+};
+
+&nvmeslot_0_7 {
+	status = "okay";
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+
+		nvmeslot_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+		nvmeslot_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+		nvmeslot_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+		};
+		nvmeslot_3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+		nvmeslot_4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+		nvmeslot_5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+		};
+		nvmeslot_6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+		};
+		nvmeslot_7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+		};
+
+	};
+};
+
+&nvmeslot_8_15 {
+	status = "okay";
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+
+		nvmeslot_8: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+		nvmeslot_9: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+		nvmeslot_10: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+		};
+		nvmeslot_11: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+		nvmeslot_12: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+		nvmeslot_13: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+		};
+		nvmeslot_14: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+		};
+		nvmeslot_15: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+		};
+	};
+};
+
+&nvmeslot_16_23 {
+	status = "okay";
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+
+		nvmeslot_16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+		nvmeslot_17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+		nvmeslot_18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+		};
+		nvmeslot_19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+		nvmeslot_20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+		nvmeslot_21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+		};
+		nvmeslot_22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+		};
+		nvmeslot_23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	psu@58 {
+		compatible = "pmbus";
+		reg = <0x58>;
+	};
+
+	psu@59 {
+		compatible = "pmbus";
+		reg = <0x59>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+	adm1278@10 {
+		compatible = "adi,adm1278";
+		reg = <0x10>;
+	};
+
+	adm1278@11 {
+		compatible = "adi,adm1278";
+		reg = <0x11>;
+	};
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2_default &pinctrl_pwm3_default
+			&pinctrl_pwm4_default &pinctrl_pwm5_default
+			&pinctrl_pwm6_default &pinctrl_pwm7_default>;
+
+	fan@0 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@1 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	fan@2 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+	};
+
+	fan@5 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+	};
+
+	fan@6 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
+	};
+
+	fan@7 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
+	};
+
+	fan@8 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
+	};
+
+	fan@9 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
+	};
+
+	fan@10 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0e>;
+	};
+
+	fan@11 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0f>;
+	};
+
+};
+
+&vhub {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&gpio {
+	gpio-line-names =
+	/*A0-A7*/	"","","","host0-special-boot","","","","",
+	/*B0-B7*/	"i2c-backup-sel","","","",
+			"power-button","presence-cpu0","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"ps0-pgood","ps1-pgood","power-chassis-control","s0-ddr-save",
+			"power-chassis-good", "s1-ddr-save","","",
+	/*G0-G7*/	"host0-ready","host0-shd-req-n","host0-shd-ack-n",
+			"s0-overtemp-n","","","","",
+	/*H0-H7*/	"uart1-mode1","uart2-mode1","uart3-mode1","uart4-mode1",
+			"ps0-vin-good","ps1-vin-good","","i2c6-reset-n",
+	/*I0-I7*/	"presence-ps0","presence-ps1","s1-special-boot","","","","","",
+	/*J0-J7*/	"s0-hightemp-n","s0-fault-alert","s0-sys-auth-failure-n",
+			"host0-reboot-ack-n","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","host0-sysreset-n","s0-spi-auth-fail-n","","","",
+	/*M0-M7*/	"","","","","s0-i2c9-alert-n","s1-i2c9-alert-n","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","identify-button","led-identify","",
+	/*R0-R7*/	"","","ext-hightemp-n","","ocp-main-pwren","reset-button","","",
+	/*S0-S7*/	"s0-vr-hot-n","s1-vr-hot-n","","",
+			"rtc-battery-voltage-read-enable","vr-pmbus-sel-n","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","bmc-vga-en-n","","","","",
+	/*Z0-Z7*/	"s0-plimit","s1-fault-alert","s1-fw-boot-ok","s0-rtc-lock","",
+			"s1-sys-auth-failure-n","s1-overtemp-n","",
+	/*AA0-AA7*/	"","","","","","","","",
+	/*AB0-AB7*/	"s1-hightemp-n","s1-plimit","s0-ddr-addr","s1-ddr-addr","","",
+			"","",
+	/*AC0-AC7*/	"sys-pwr-gd","","spi0-program-sel","spi0-backup-sel","bmc-ok",
+			"","presence-cpu1","ocp-pgood";
+
+	i2c4-o-en-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Y, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "i2c4-o-en";
+	};
+
+	ocp-aux-pwren-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(R, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "ocp-aux-pwren";
+	};
+
+	bmc-ready-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AC, 5) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "bmc-ready";
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts
new file mode 100644
index 000000000000..53b4372f1a08
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts
@@ -0,0 +1,622 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright 2024 Ampere Computing LLC.
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Ampere Mt. Jefferson BMC";
+	compatible = "ampere,mtjefferson-bmc", "aspeed,ast2600";
+
+	aliases {
+		i2c20 = &i2c4_bus70_chn0;
+		i2c22 = &i2c4_bus70_chn2;
+
+		/*
+		 *  I2C OCP alias port
+		 */
+		i2c30 = &ocpslot;
+
+		/*
+		 *  I2C NVMe alias port
+		 */
+		i2c48 = &nvmeslot_0;
+		i2c49 = &nvmeslot_1;
+		i2c50 = &nvmeslot_2;
+		i2c51 = &nvmeslot_3;
+		i2c52 = &nvmeslot_4;
+		i2c53 = &nvmeslot_5;
+		i2c54 = &nvmeslot_6;
+		i2c55 = &nvmeslot_7;
+		i2c56 = &nvmeslot_8;
+		i2c57 = &nvmeslot_9;
+		i2c58 = &nvmeslot_10;
+		i2c59 = &nvmeslot_11;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: video {
+			size = <0x04000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;  /* 16M */
+		};
+	};
+
+	voltage_mon_reg: voltage-mon-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ltc2497_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-bmc-ready {
+			gpios = <&gpio0 ASPEED_GPIO(W, 5) (GPIO_ACTIVE_HIGH | GPIO_TRANSITORY)>;
+		};
+
+		led-sw-heartbeat {
+			gpios = <&gpio0 ASPEED_GPIO(N, 3) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-identify {
+			gpios = <&gpio0 ASPEED_GPIO(S, 3) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-fault {
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels =   <&adc0 0>, <&adc0 1>, <&adc0 2>,
+				<&adc_i2c_2 0>, <&adc_i2c_2 1>,
+				<&adc_i2c_2 2>, <&adc_i2c_2 3>,
+				<&adc_i2c_2 4>, <&adc_i2c_2 5>,
+				<&adc_i2c_2 6>, <&adc_i2c_2 7>,
+				<&adc_i2c_2 8>, <&adc_i2c_2 9>,
+				<&adc_i2c_2 10>, <&adc_i2c_2 11>,
+				<&adc_i2c_2 12>, <&adc_i2c_2 13>,
+				<&adc_i2c_2 14>, <&adc_i2c_2 15>,
+				<&adc_i2c_0 0>, <&adc_i2c_0 1>,
+				<&adc_i2c_0 2>, <&adc_i2c_0 3>,
+				<&adc_i2c_0 4>, <&adc_i2c_0 5>,
+				<&adc_i2c_0 6>, <&adc_i2c_0 7>,
+				<&adc_i2c_0 8>, <&adc_i2c_0 9>,
+				<&adc_i2c_0 10>, <&adc_i2c_0 11>,
+				<&adc_i2c_0 12>;
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mac0 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default>;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	use-ncsi;
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+	bus-frequency = <1000000>;
+	multi-master;
+	mctp-controller;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		i2c4_bus70_chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			eeprom@52 {
+				compatible = "atmel,24c256";
+				reg = <0x52>;
+				pagesize = <32>;
+			};
+			temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+			temperature-sensor@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+			temperature-sensor@4a {
+				compatible = "ti,tmp75";
+				reg = <0x4a>;
+			};
+			temperature-sensor@4b {
+				compatible = "ti,tmp464";
+				reg = <0x4b>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				channel@0 {
+					reg = <0x0>;
+					status = "disabled";
+				};
+				channel@1 {
+					reg = <0x1>;
+					status = "disabled";
+				};
+				channel@2 {
+					reg = <0x2>;
+					status = "disabled";
+				};
+				channel@3 {
+					reg = <0x3>;
+					status = "disabled";
+				};
+				channel@4 {
+					reg = <0x4>;
+				};
+			};
+			temperature-sensor@4d {
+				compatible = "ti,tmp75";
+				reg = <0x4d>;
+			};
+			temperature-sensor@4e {
+				compatible = "ti,tmp75";
+				reg = <0x4e>;
+			};
+			temperature-sensor@4f {
+				compatible = "ti,tmp75";
+				reg = <0x4f>;
+			};
+			temperature-sensor@28 {
+				compatible = "nuvoton,nct7802";
+				reg = <0x28>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+				channel@1 { /* RTD1 */
+					reg = <1>;
+					sensor-type = "temperature";
+					temperature-mode = "thermistor";
+				};
+			};
+			adc_i2c_0: adc@14 {
+				compatible = "lltc,ltc2497";
+				reg = <0x14>;
+				vref-supply = <&voltage_mon_reg>;
+				#io-channel-cells = <1>;
+			};
+		};
+
+		i2c4_bus70_chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			adc_i2c_2: adc@14 {
+				compatible = "lltc,ltc2497";
+				reg = <0x14>;
+				vref-supply = <&voltage_mon_reg>;
+				#io-channel-cells = <1>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			i2c-mux@71 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x71>;
+				i2c-mux-idle-disconnect;
+
+				nvmeslot_8: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+				};
+				nvmeslot_9: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x1>;
+				};
+				nvmeslot_10: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x2>;
+				};
+				nvmeslot_11: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x3>;
+				};
+			};
+
+			i2c-mux@72 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72>;
+				i2c-mux-idle-disconnect;
+
+				nvmeslot_4: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x4>;
+				};
+				nvmeslot_5: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x5>;
+				};
+				nvmeslot_6: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x6>;
+				};
+				nvmeslot_7: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x7>;
+				};
+			};
+
+			i2c-mux@74 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x74>;
+				i2c-mux-idle-disconnect;
+
+				ocpslot: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+
+					ocpslot_temp: temperature-sensor@1f {
+						compatible = "ti,tmp421";
+						reg = <0x1f>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						channel@0 {
+							reg = <0x0>;
+							status = "disabled";
+						};
+						channel@1 {
+							reg = <0x1>;
+						};
+					};
+				};
+
+				nvmeslot_0: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x4>;
+				};
+				nvmeslot_1: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x5>;
+				};
+				nvmeslot_2: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x6>;
+				};
+				nvmeslot_3: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x7>;
+				};
+			};
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	temperature-sensor@4f {
+		compatible = "ti,tmp75";
+		reg = <0x4f>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	fan-controller@5c {
+		compatible = "onnn,adt7462";
+		reg = <0x5c>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+	};
+
+	temperature-sensor@18 {
+		compatible = "jedec,jc-42.4-temp";
+		reg = <0x18>;
+	};
+
+	temperature-sensor@1a {
+		compatible = "jedec,jc-42.4-temp";
+		reg = <0x1a>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+	ssif-bmc@10 {
+		compatible = "ssif-bmc";
+		reg = <0x10>;
+	};
+};
+
+&i2c14 {
+	status = "okay";
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	bmc_ast2600_cpu: temperature-sensor@48 {
+		compatible = "ti,tmp75";
+		reg = <0x48>;
+	};
+};
+
+&i2c15 {
+	status = "okay";
+	gpio_expander1: gpio-expander@22 {
+		compatible = "nxp,pca9535";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"presence-ocp1","presence-ocp2",
+			"","",
+			"","",
+			"","",
+			"","",
+			"","",
+			"","",
+			"","";
+	};
+};
+
+&adc0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default>;
+};
+
+&vhub {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","cpu-type-detect","i2c2-reset-n","i2c6-reset-n","i2c5-reset-n",
+	/*B0-B7*/	"","","","","host0-sysreset-n","host0-pmin-n","fru-rd-complete",
+			"chassis-id-sel",
+	/*C0-C7*/	"s0-vrd-fault-n","","bmc-debug-mode","","cpld-3v3-irq-n","","vrd-sel",
+			"spd-sel",
+	/*D0-D7*/	"presence-ps0","presence-ps1","hsc-12vmain-alt2-n","ext-high-temp-n",
+			"","","","",
+	/*E0-E7*/	"eth-phy-rst-n","eth-phy-int-n","","","","","","",
+	/*F0-F7*/	"s0-pcp-oc-warn-n","","power-chassis-control",
+			"cpu-bios-recover","s0-heartbeat","hs-scout-proc-hot","s0-vr-hot-n","",
+	/*G0-G7*/	"","","hsc-12vmain-alt1-n","","","bp-cpld-program-en","led-fp-sta-gr",
+			"led-fp-sta-amb",
+	/*H0-H7*/	"jtag-program-sel","jtag-cmpl2","wd-disable-n","power-chassis-good","","",
+			"","",
+	/*I0-I7*/	"","","","","","","power-button","rtc-battery-voltage-read-enable",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","reset-button","","","",
+	/*M0-M7*/	"nmi-n","s0-ddr-save","soc-spi-nor-access","presence-cpu0","s0-rtc-lock",
+			"","","",
+	/*N0-N7*/	"hpm-fw-recovery","hpm-stby-rst-n","jtag-sel-s0","led-sw-hb",
+			"jtag-dbgr-prsnt-n","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"ps0-ac-loss-n","ps1-ac-loss-n","","","led-fault","user-mode","jtag-srst-n",
+			"led-bmc-hb",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","identify-button","led-identify","","spi-nor-access","host0-ready","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"s0-hightemp-n","s0-fault-alert","s0-sys-auth-failure-n",
+			"host0-reboot-ack-n","s0-fw-boot-ok","host0-shd-req-n",
+			"host0-shd-ack-n","s0-overtemp-n",
+	/*W0-W7*/	"ocp-aux-pwren","ocp-main-pwren","ocp-pgood","",
+			"bmc-ok","bmc-ready","spi0-program-sel","spi0-backup-sel",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","vrd-prg-en-n","","","","host0-special-boot",
+	/*Z0-Z7*/	"","ps0-pgood","ps1-pgood","","","","","";
+
+	ocp-aux-pwren-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "ocp-aux-pwren";
+	};
+
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/	"","","","","","","","",
+	/*18B0-18B7*/	"","","","","s0-soc-pgood","vga-ft-press-n","emmc-rst-n","s01-uart1-sel",
+	/*18C0-18C7*/	"uart1-mode0","uart1-mode1","uart2-mode0","uart2-mode1",
+			"","","","",
+	/*18D0-18D7*/	"","","","","","","","",
+	/*18E0-18E3*/	"","","","";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
new file mode 100644
index 000000000000..2b336aa0146d
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
@@ -0,0 +1,1061 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (c) 2022, Ampere Computing LLC
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Ampere Mt.Mitchell BMC";
+	compatible = "ampere,mtmitchell-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial7 = &uart8;
+		serial8 = &uart9;
+
+		/*
+		 * I2C temperature alias port
+		 */
+		i2c20 = &i2c4_bus70_chn0;
+		i2c21 = &i2c4_bus70_chn1;
+		i2c22 = &i2c4_bus70_chn2;
+		i2c23 = &i2c4_bus70_chn3;
+
+		/*
+		 *  i2c bus 30-31 assigned to OCP slot 0-1
+		 */
+		i2c30 = &ocpslot_0;
+		i2c31 = &ocpslot_1;
+
+		/*
+		 *  i2c bus 32-33 assigned to Riser slot 0-1
+		 */
+		i2c32 = &i2c_riser0;
+		i2c33 = &i2c_riser1;
+
+		/*
+		 *  i2c bus 38-39 assigned to FRU on Riser slot 0-1
+		 */
+		i2c38 = &i2c_riser0_chn_0;
+		i2c39 = &i2c_riser1_chn_0;
+
+		/*
+		 *  I2C NVMe alias port
+		 */
+		i2c100 = &backplane_0;
+		i2c48 = &nvmeslot_0;
+		i2c49 = &nvmeslot_1;
+		i2c50 = &nvmeslot_2;
+		i2c51 = &nvmeslot_3;
+		i2c52 = &nvmeslot_4;
+		i2c53 = &nvmeslot_5;
+		i2c54 = &nvmeslot_6;
+		i2c55 = &nvmeslot_7;
+
+		i2c101 = &backplane_1;
+		i2c56 = &nvmeslot_8;
+		i2c57 = &nvmeslot_9;
+		i2c58 = &nvmeslot_10;
+		i2c59 = &nvmeslot_11;
+		i2c60 = &nvmeslot_12;
+		i2c61 = &nvmeslot_13;
+		i2c62 = &nvmeslot_14;
+		i2c63 = &nvmeslot_15;
+
+		i2c102 = &backplane_2;
+		i2c64 = &nvmeslot_16;
+		i2c65 = &nvmeslot_17;
+		i2c66 = &nvmeslot_18;
+		i2c67 = &nvmeslot_19;
+		i2c68 = &nvmeslot_20;
+		i2c69 = &nvmeslot_21;
+		i2c70 = &nvmeslot_22;
+		i2c71 = &nvmeslot_23;
+
+		i2c80 = &nvme_m2_0;
+		i2c81 = &nvme_m2_1;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: video {
+			size = <0x04000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;  /* 16M */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		/*
+		 * Use gpio-leds to configure GPIOW5 (bmc-ready) pin to be reseted when
+		 * watchdog timeout.
+		 */
+		led-bmc-ready {
+			gpios = <&gpio0 ASPEED_GPIO(W, 5) (GPIO_ACTIVE_HIGH | GPIO_TRANSITORY)>;
+		};
+
+		led-sw-heartbeat {
+			gpios = <&gpio0 ASPEED_GPIO(N, 3) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-identify {
+			gpios = <&gpio0 ASPEED_GPIO(S, 3) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-fault {
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-fan-fault {
+			gpios = <&gpio_expander1 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-psu-fault {
+			gpios = <&gpio_expander1 1 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	voltage_mon_reg: voltage-mon-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ltc2497_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	gpioI5mux: mux-controller {
+		compatible = "gpio-mux";
+		#mux-control-cells = <0>;
+		mux-gpios = <&gpio0 ASPEED_GPIO(I, 5) GPIO_ACTIVE_HIGH>;
+	};
+
+	adc0mux: adc0mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 0>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc1mux: adc1mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 1>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc2mux: adc2mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 2>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc3mux: adc3mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 3>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc4mux: adc4mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 4>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc5mux: adc5mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 5>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc6mux: adc6mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 6>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc7mux: adc7mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 7>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc8mux: adc8mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 8>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc9mux: adc9mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 9>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc10mux: adc10mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 10>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc11mux: adc11mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 11>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc12mux: adc12mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 12>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc13mux: adc13mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 13>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc14mux: adc14mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 14>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc15mux: adc15mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 15>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels =	<&adc0mux 0>, <&adc0mux 1>,
+				<&adc1mux 0>, <&adc1mux 1>,
+				<&adc2mux 0>, <&adc2mux 1>,
+				<&adc3mux 0>, <&adc3mux 1>,
+				<&adc4mux 0>, <&adc4mux 1>,
+				<&adc5mux 0>, <&adc5mux 1>,
+				<&adc6mux 0>, <&adc6mux 1>,
+				<&adc7mux 0>, <&adc7mux 1>,
+				<&adc8mux 0>, <&adc8mux 1>,
+				<&adc9mux 0>, <&adc9mux 1>,
+				<&adc10mux 0>, <&adc10mux 1>,
+				<&adc11mux 0>, <&adc11mux 1>,
+				<&adc12mux 0>, <&adc12mux 1>,
+				<&adc13mux 0>, <&adc13mux 1>,
+				<&adc14mux 0>, <&adc14mux 1>,
+				<&adc15mux 0>, <&adc15mux 1>,
+				<&adc_i2c_1 0>, <&adc_i2c_1 1>,
+				<&adc_i2c_1 2>, <&adc_i2c_1 3>,
+				<&adc_i2c_1 4>, <&adc_i2c_1 5>,
+				<&adc_i2c_1 6>, <&adc_i2c_1 7>,
+				<&adc_i2c_1 8>, <&adc_i2c_1 9>,
+				<&adc_i2c_1 10>, <&adc_i2c_1 11>,
+				<&adc_i2c_1 12>, <&adc_i2c_1 13>,
+				<&adc_i2c_1 14>, <&adc_i2c_1 15>,
+				<&adc0 0>, <&adc0 1>,
+				<&adc0 2>;
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mac0 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default>;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart8 {
+	status = "okay";
+};
+
+&uart9 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	temperature-sensor@2e {
+		compatible = "adi,adt7490";
+		reg = <0x2e>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	psu@58 {
+		compatible = "pmbus";
+		reg = <0x58>;
+	};
+
+	psu@59 {
+		compatible = "pmbus";
+		reg = <0x59>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	bus-frequency = <1000000>;
+	multi-master;
+	mctp-controller;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	adc_i2c_0: adc@14 {
+		compatible = "lltc,ltc2497";
+		reg = <0x14>;
+		vref-supply = <&voltage_mon_reg>;
+		#io-channel-cells = <1>;
+	 };
+
+	adc_i2c_1: adc@16 {
+		compatible = "lltc,ltc2497";
+		reg = <0x16>;
+		vref-supply = <&voltage_mon_reg>;
+		#io-channel-cells = <1>;
+	 };
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		i2c4_bus70_chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			outlet_temp1: temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+			psu1_inlet_temp2: temperature-sensor@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+		};
+
+		i2c4_bus70_chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+
+			pcie_zone_temp1: temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+			psu0_inlet_temp2: temperature-sensor@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+		};
+
+		i2c4_bus70_chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			pcie_zone_temp2: temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+			outlet_temp2: temperature-sensor@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+		};
+
+		i2c4_bus70_chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			mb_inlet_temp1: temperature-sensor@7c {
+				compatible = "microchip,emc1413";
+				reg = <0x7c>;
+			};
+			mb_inlet_temp2: temperature-sensor@4c {
+				compatible = "microchip,emc1413";
+				reg = <0x4c>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		ocpslot_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			ocpslot_0_temp: temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+
+		ocpslot_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+
+			ocpslot_1_temp: temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+
+		i2c_riser0: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			i2c-mux@72 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72>;
+				i2c-mux-idle-disconnect;
+
+				i2c_riser0_chn_0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+
+					eeprom@50 {
+						compatible = "atmel,24c02";
+						reg = <0x50>;
+						pagesize = <16>;
+					};
+				};
+			};
+		};
+
+		i2c_riser1: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			i2c-mux@72 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72>;
+				i2c-mux-idle-disconnect;
+
+				i2c_riser1_chn_0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+
+					eeprom@50 {
+						compatible = "atmel,24c02";
+						reg = <0x50>;
+						pagesize = <16>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp112";
+		reg = <0x48>;
+	};
+
+	gpio@77 {
+		compatible = "nxp,pca9539";
+		reg = <0x77>;
+		gpio-controller;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"ext-vref-sel","","presence-hdd-bp5-n","presence-hdd-bp6-n",
+		"","bmc-riser-en-n","bmc-ocp1-en-n","bmc-ocp0-en-n",
+		"","","","",
+		"","","","";
+
+		bmc-ocp0-en-hog {
+			gpio-hog;
+			gpios = <7 GPIO_ACTIVE_LOW>;
+			output-high;
+			line-name = "bmc-ocp0-en-n";
+		};
+	};
+
+	fan-controller0@20 {
+		compatible = "maxim,max31790";
+		reg = <0x20>;
+	};
+
+	fan-controller1@2f {
+		compatible = "maxim,max31790";
+		reg = <0x2f>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		backplane_1: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+				pagesize = <32>;
+			};
+
+			i2c-mux@71 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x71>;
+				i2c-mux-idle-disconnect;
+
+				nvmeslot_8: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+				};
+				nvmeslot_9: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x1>;
+				};
+				nvmeslot_10: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x2>;
+				};
+				nvmeslot_11: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x3>;
+				};
+				nvmeslot_12: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x4>;
+				};
+				nvmeslot_13: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x5>;
+				};
+				nvmeslot_14: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x6>;
+				};
+				nvmeslot_15: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x7>;
+				};
+			};
+
+			tmp432@4c {
+				compatible = "ti,tmp75";
+				reg = <0x4c>;
+			};
+		};
+
+		backplane_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+				pagesize = <32>;
+			};
+
+			i2c-mux@71 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x71>;
+				i2c-mux-idle-disconnect;
+
+				nvmeslot_16: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+				};
+				nvmeslot_17: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x1>;
+				};
+				nvmeslot_18: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x2>;
+				};
+				nvmeslot_19: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x3>;
+				};
+				nvmeslot_20: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x4>;
+				};
+				nvmeslot_21: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x5>;
+				};
+				nvmeslot_22: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x6>;
+				};
+				nvmeslot_23: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x7>;
+				};
+			};
+
+			tmp432@4c {
+				compatible = "ti,tmp75";
+				reg = <0x4c>;
+			};
+		};
+
+		backplane_0: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+				pagesize = <32>;
+			};
+
+			i2c-mux@71 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x71>;
+				i2c-mux-idle-disconnect;
+
+				nvmeslot_0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+				};
+				nvmeslot_1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x1>;
+				};
+				nvmeslot_2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x2>;
+				};
+				nvmeslot_3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x3>;
+				};
+				nvmeslot_4: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x4>;
+				};
+				nvmeslot_5: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x5>;
+				};
+				nvmeslot_6: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x6>;
+				};
+				nvmeslot_7: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x7>;
+				};
+			};
+
+			tmp432@4c {
+				compatible = "ti,tmp75";
+				reg = <0x4c>;
+			};
+		};
+
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+
+			i2c-mux@71 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x71>;
+				i2c-mux-idle-disconnect;
+
+				nvme_m2_0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+				};
+
+				nvme_m2_1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x1>;
+				};
+			};
+		};
+	};
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+	ssif-bmc@10 {
+		compatible = "ssif-bmc";
+		reg = <0x10>;
+	};
+};
+
+&i2c14 {
+	status = "okay";
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	bmc_ast2600_cpu: temperature-sensor@35 {
+		compatible = "ti,tmp175";
+		reg = <0x35>;
+	};
+};
+
+&i2c15 {
+	status = "okay";
+	gpio_expander1: gpio-expander@22 {
+		compatible = "nxp,pca9535";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"fan-fault","psu-fault",
+			"","",
+			"","",
+			"gpi0","gpi1",
+			"","",
+			"","",
+			"","",
+			"","";
+	};
+};
+
+&adc0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default>;
+};
+
+&vhub {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","i2c2-reset-n","i2c6-reset-n","i2c4-reset-n",
+	/*B0-B7*/	"","","","","host0-sysreset-n","host0-pmin-n","","",
+	/*C0-C7*/	"s0-vrd-fault-n","s1-vrd-fault-n","bmc-debug-mode","",
+			"irq-n","","vrd-sel","spd-sel",
+	/*D0-D7*/	"presence-ps0","presence-ps1","hsc-12vmain-alt2-n","ext-high-temp-n",
+			"","bmc-ncsi-txen","","",
+	/*E0-E7*/	"","eth-phy-int-n","clk50m-bmc-ncsi","","","","","",
+	/*F0-F7*/	"s0-pcp-oc-warn-n","s1-pcp-oc-warn-n","power-chassis-control",
+			"cpu-bios-recover","s0-heartbeat","hs-csout-prochot",
+			"s0-vr-hot-n","s1-vr-hot-n",
+	/*G0-G7*/	"","","hsc-12vmain-alt1-n","","","","","",
+	/*H0-H7*/	"jtag-program-sel","fpga-program-b","wd-disable-n",
+			"power-chassis-good","","","","",
+	/*I0-I7*/	"","","","","","adc-sw","power-button","rtc-battery-voltage-read-enable",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","s0-ddr-save","soc-spi-nor-access","presence-cpu0",
+			"s0-rtc-lock","","","",
+	/*N0-N7*/	"hpm-fw-recovery","hpm-stby-rst-n","jtag-sel-s0","led-sw-hb",
+			"jtag-dbgr-prsnt-n","s1-heartbeat","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"ps0-ac-loss-n","ps1-ac-loss-n","","",
+			"led-fault","cpld-user-mode","jtag-srst-n","led-bmc-hb",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","identify-button","led-identify",
+			"s1-ddr-save","spi-nor-access","host0-ready","presence-cpu1",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"s0-hightemp-n","s0-fault-alert","s0-sys-auth-failure-n",
+			"host0-reboot-ack-n","s0-fw-boot-ok","host0-shd-req-n",
+			"host0-shd-ack-n","s0-overtemp-n",
+	/*W0-W7*/	"ocp-aux-pwren","ocp-main-pwren","ocp-pgood","s1-pcp-pgood",
+			"bmc-ok","bmc-ready","spi0-program-sel","spi0-backup-sel",
+	/*X0-X7*/	"i2c-backup-sel","s1-fault-alert","s1-fw-boot-ok",
+			"s1-hightemp-n","s0-spi-auth-fail-n","s1-sys-auth-failure-n",
+			"s1-overtemp-n","cpld-s1-spi-auth-fail-n",
+	/*Y0-Y7*/	"","","","","","","","host0-special-boot",
+	/*Z0-Z7*/	"reset-button","ps0-pgood","ps1-pgood","","","","","";
+
+	ocp-aux-pwren-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "ocp-aux-pwren";
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/	"","","","","","","","",
+	/*18B0-18B7*/	"","","","","","","s0-soc-pgood","",
+	/*18C0-18C7*/	"uart1-mode0","uart1-mode1","uart2-mode0","uart2-mode1",
+			"uart3-mode0","uart3-mode1","uart4-mode0","uart4-mode1",
+	/*18D0-18D7*/	"","","","","","","","",
+	/*18E0-18E3*/	"","","","";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-arm-stardragon4800-rep2.dts
index 7c6af7f226e7..b550a48f48f0 100644
--- a/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-arm-stardragon4800-rep2.dts
@@ -171,7 +171,7 @@
 				reg = <0x50>;
 			};
 			dps650ab@58 {
-				compatible = "dps650ab";
+				compatible = "delta,dps650ab";
 				reg = <0x58>;
 			};
 		};
@@ -200,18 +200,14 @@
 	status = "okay";
 };
 
-&pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-};
-
 &gpio {
-	pin_gpio_c7 {
+	pin-gpio-c7-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(C, 7) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "BIOS_SPI_MUX_S";
 	};
-	pin_gpio_d1 {
+	pin-gpio-d1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c246d4i.dts
index 9b4cf5ebe6d5..3ebd80db06f9 100644
--- a/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c246d4i.dts
@@ -63,7 +63,7 @@
 		status = "okay";
 		m25p,fast-read;
 		label = "bmc";
-		spi-max-frequency = <100000000>; /* 100 MHz */
+		spi-max-frequency = <50000000>; /* 50 MHz */
 #include "openbmc-flash-layout.dtsi"
 	};
 };
@@ -83,6 +83,9 @@
 
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+
+	nvmem-cells = <&eth0_macaddress>;
+	nvmem-cell-names = "mac-address";
 };
 
 &i2c1 {
@@ -103,6 +106,16 @@
 		compatible = "st,24c128", "atmel,24c128";
 		reg = <0x57>;
 		pagesize = <16>;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eth0_macaddress: macaddress@3f80 {
+				reg = <0x3f80 6>;
+			};
+		};
 	};
 };
 
@@ -173,7 +186,7 @@
 			"CK_33M_BMC", "LFRAME", "SERIRQ", "S_PLTRST";
 
 	/* Assert BMC_READY so BIOS doesn't sit around waiting for it */
-	bmc-ready {
+	bmc-ready-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>;
 		output-high;
@@ -202,3 +215,7 @@
 	status = "okay";
 	aspeed,lpc-io-reg = <0xca2>;
 };
+
+&peci0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts
new file mode 100644
index 000000000000..8c57a071f488
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts
@@ -0,0 +1,326 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/watchdog/aspeed-wdt.h>
+
+/{
+	model = "ASRock E3C256D4I BMC";
+	compatible = "asrock,e3c256d4i-bmc", "aspeed,ast2500";
+
+	aliases {
+		serial4 = &uart5;
+
+		i2c20 = &i2c2mux0ch0;
+		i2c21 = &i2c2mux0ch1;
+		i2c22 = &i2c2mux0ch2;
+		i2c23 = &i2c2mux0ch3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* BMC heartbeat */
+		led-0 {
+			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_GREEN>;
+			linux,default-trigger = "timer";
+		};
+
+		/* system fault */
+		led-1 {
+			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_FAULT;
+			color = <LED_COLOR_ID_RED>;
+			panic-indicator;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <100000000>; /* 100 MHz */
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+
+	nvmem-cells = <&eth0_macaddress>;
+	nvmem-cell-names = "mac-address";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c2mux0ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c2mux0ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c2mux0ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c2mux0ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	vrm@60 {
+		compatible = "isil,isl69269";
+		reg = <0x60>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	/* FRU eeprom */
+	eeprom@57 {
+		compatible = "st,24c128", "atmel,24c128";
+		reg = <0x57>;
+		pagesize = <16>;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eth0_macaddress: macaddress@3f80 {
+				reg = <0x3f80 6>;
+			};
+		};
+	};
+};
+
+&video {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&peci0 {
+	status = "okay";
+};
+
+&wdt1 {
+	aspeed,reset-mask = <(AST2500_WDT_RESET_DEFAULT & ~AST2500_WDT_RESET_LPC)>;
+};
+
+&wdt2 {
+	aspeed,reset-mask = <(AST2500_WDT_RESET_DEFAULT & ~AST2500_WDT_RESET_LPC)>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default /* CPU */
+		&pinctrl_pwm2_default      /* rear */
+		&pinctrl_pwm4_default>;    /* front */
+
+	/* CPU */
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	/* rear */
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	/* front */
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+		/*  A */ "", "", "NMI_BTN_N", "BMC_NMI", "", "", "", "",
+		/*  B */ "", "", "", "", "", "", "", "",
+		/*  C */ "", "", "", "", "", "", "", "",
+		/*  D */ "BMC_PSIN", "BMC_PSOUT", "BMC_RESETCON", "RESETCON",
+			"", "", "", "",
+		/*  E */ "", "", "", "", "", "", "", "",
+		/*  F */ "LOCATORLED_STATUS_N", "LOCATORBTN", "", "",
+			"", "", "BMC_PCH_SCI_LPC", "BMC_NCSI_MUX_CTL",
+		/*  G */ "HWM_BAT_EN", "CHASSIS_ID0", "CHASSIS_ID1", "CHASSIS_ID2",
+			"", "", "", "",
+		/*  H */ "FM_ME_RCVR_N", "O_PWROK", "", "D4_DIMM_EVENT_3V_N",
+			"MFG_MODE_N", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN",
+		/*  I */ "", "", "", "", "", "", "", "",
+		/*  J */ "BMC_READY", "BMC_PCH_BIOS_CS_N", "BMC_SMI", "", "", "", "", "",
+		/*  K */ "", "", "", "", "", "", "", "",
+		/*  L */ "", "", "", "", "", "", "", "",
+		/*  M */ "", "", "", "", "", "", "", "",
+		/*  N */ "", "", "", "", "", "", "", "",
+		/*  O */ "", "", "", "", "", "", "", "",
+		/*  P */ "", "", "", "", "", "", "", "",
+		/*  Q */ "", "", "", "", "", "", "", "",
+		/*  R */ "", "", "", "", "", "", "", "",
+		/*  S */ "PCHHOT_BMC_N", "", "RSMRST", "", "", "", "", "",
+		/*  T */ "", "", "", "", "", "", "", "",
+		/*  U */ "", "", "", "", "", "", "", "",
+		/*  V */ "", "", "", "", "", "", "", "",
+		/*  W */ "", "", "", "", "", "", "", "",
+		/*  X */ "", "", "", "", "", "", "", "",
+		/*  Y */ "SLP_S3", "SLP_S5", "", "", "", "", "", "",
+		/*  Z */ "CPU_CATERR_BMC_N", "", "SYSTEM_FAULT_LED_N", "BMC_THROTTLE_N",
+			"", "", "", "",
+		/* AA */ "CPU1_THERMTRIP_LATCH_N", "", "CPU1_PROCHOT_N", "",
+			"", "", "IRQ_SMI_ACTIVE_N", "FM_BIOS_POST_CMPLT_N",
+		/* AB */ "", "", "ME_OVERRIDE", "BMC_DMI_MODIFY", "", "", "", "",
+		/* AC */ "", "", "", "", "", "", "", "";
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default /* 3VSB */
+		&pinctrl_adc1_default	   /* 5VSB */
+		&pinctrl_adc2_default	   /* CPU1 */
+		&pinctrl_adc3_default	   /* VCCSA */
+		&pinctrl_adc4_default	   /* VCCM */
+		&pinctrl_adc5_default	   /* V10M */
+		&pinctrl_adc6_default	   /* VCCIO */
+		&pinctrl_adc7_default	   /* VCCGT */
+		&pinctrl_adc8_default	   /* VPPM */
+		&pinctrl_adc9_default	   /* BAT */
+		&pinctrl_adc10_default	   /* 3V */
+		&pinctrl_adc11_default	   /* 5V */
+		&pinctrl_adc12_default	   /* 12V */
+		&pinctrl_adc13_default	   /* GND */
+		&pinctrl_adc14_default	   /* GND */
+		&pinctrl_adc15_default>;   /* GND */
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-romed8hm3.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-romed8hm3.dts
new file mode 100644
index 000000000000..e306655ce4a3
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-romed8hm3.dts
@@ -0,0 +1,274 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/{
+	model = "ASRock ROMED8HM3 BMC v1.00";
+	compatible = "asrock,romed8hm3-bmc", "aspeed,ast2500";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=tty0 console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		system-fault {
+			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
+			panic-indicator;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>; /* 50 MHz */
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x2f8>;
+	aspeed,lpc-interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+
+	nvmem-cells = <&eth0_macaddress>;
+	nvmem-cell-names = "mac-address";
+};
+
+&i2c0 {
+	status = "okay";
+
+	/* inlet temp sensor */
+	w83773g@4c {
+		compatible = "nuvoton,w83773g";
+		reg = <0x4c>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* IPB temp sensor */
+	w83773g@4c {
+		compatible = "nuvoton,w83773g";
+		reg = <0x4c>;
+	};
+
+	/* IPB PMIC */
+	lm25066@40 {
+		compatible = "ti,lm25066";
+		reg = <0x40>;
+		shunt-resistor-micro-ohms = <1000>;
+	};
+
+	/* 12VSB PMIC */
+	lm25066@41 {
+		compatible = "ti,lm25066";
+		reg = <0x41>;
+		shunt-resistor-micro-ohms = <10000>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+
+	/* Baseboard FRU eeprom */
+	eeprom@50 {
+		compatible = "st,24c128", "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <16>;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eth0_macaddress: macaddress@3f80 {
+				reg = <0x3f80 6>;
+			};
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3_default
+		&pinctrl_pwm4_default
+		&pinctrl_pwm5_default
+		&pinctrl_pwm6_default>;
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03 0x0b>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0c>;
+	};
+
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05 0x0d>;
+	};
+
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x0e>;
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+		/*  A */ "LOCATORLED_STATUS_N", "BMC_MAC2_INTB", "NMI_BTN_N", "BMC_NMI",
+			"", "", "", "",
+		/*  B */ "POST_COMPLETE_N", "", "", "", "", "", "", "",
+		/*  C */ "", "", "", "", "PCIE_HP_SEL_N", "PCIE_SATA_SEL_N", "LOCATORBTN", "",
+		/*  D */ "BMC_PSIN", "BMC_PSOUT", "BMC_RESETCON", "RESETCON",
+			"", "", "", "PSU_FAN_FAIL_N",
+		/*  E */ "", "", "", "", "", "", "", "",
+		/*  F */ "NIC_PWR_GOOD", "PRSNTB0", "PRSNTB1", "PRSNTB2",
+			"PRSNTB3", "", "3VSB_PCIE1_PG", "12V_PCIE1_PG",
+		/*  G */ "HWM_BAT_EN", "CHASSIS_ID0", "CHASSIS_ID1", "CHASSIS_ID2",
+			"BMC_ALERT1_N_R", "BMC_ALERT2_N_R", "BMC_ALERT3_N", "BMC_ALERT4_N",
+		/*  H */ "X24_C1_PRSNT", "X24_C2_PRSNT", "X24_C3_PRSNT", "FM_MEM_THERM_EVENT_BMC_R_N",
+			"FACMODE", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN",
+		/*  I */ "", "", "", "", "", "", "", "",
+		/*  J */ "BMC_READY", "BMC_PCH_BIOS_CS_N", "", "P0_MA_DDR_QS_CS_N",
+			"", "", "", "",
+		/*  K */ "", "", "", "", "", "", "", "",
+		/*  L */ "", "", "", "", "", "", "", "",
+		/*  M */ "", "", "MEZZ_PWRBRK_N", "OCP_HP_RST_EN",
+			"MAIN_PWR_EN_G", "BMC_MAIN_EN", "AUX_PWR_EN_G", "BMC_AUX_EN",
+		/*  N */ "", "", "", "", "", "", "", "",
+		/*  O */ "", "", "", "", "", "", "", "",
+		/*  P */ "", "", "", "", "", "", "", "",
+		/*  Q */ "", "", "", "",
+			"BMC_SMB_PRESENT_1_N", "BMC_SMB_PRESENT_2_N",
+			"BMC_SMB_PRESENT_3_N", "BMC_PCIE_WAKE_N",
+		/*  R */ "", "", "THERMALTRIP_CLEAR_N", "", "", "", "", "",
+		/*  S */ "", "", "", "", "", "", "", "",
+		/*  T */ "", "", "", "", "", "", "", "",
+		/*  U */ "", "", "", "", "", "", "", "",
+		/*  V */ "", "", "", "", "", "", "", "",
+		/*  W */ "", "", "", "", "", "", "", "",
+		/*  X */ "", "", "", "", "", "", "", "",
+		/*  Y */ "SLP_S3", "SLP_S4_S5", "NODE_ID_1", "NODE_ID_2", "", "", "", "",
+		/*  Z */ "", "", "SYSTEM_FAULT_LED_N", "FAST_THROTTLE_N",
+			"", "", "", "",
+		/* AA */ "FM_CPU0_IBMC_THERMTRIP_N", "", "PROCHOT_L_G", "",
+			"", "", "", "",
+		/* AB */ "BMC_FORCE_SELFREFRESH", "PWRGD_OUT", "", "IRQ_BMC_PCH_SMI_LPC_N",
+			"", "", "", "",
+		/* AC */ "", "", "", "", "", "", "", "";
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		&pinctrl_adc1_default
+		&pinctrl_adc2_default
+		&pinctrl_adc3_default
+		&pinctrl_adc4_default
+		&pinctrl_adc5_default
+		&pinctrl_adc6_default
+		&pinctrl_adc7_default
+		&pinctrl_adc8_default
+		&pinctrl_adc9_default
+		&pinctrl_adc10_default
+		&pinctrl_adc11_default
+		&pinctrl_adc12_default
+		&pinctrl_adc13_default
+		&pinctrl_adc14_default
+		&pinctrl_adc15_default>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-spc621d8hm3.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-spc621d8hm3.dts
new file mode 100644
index 000000000000..c4097e4f2ca4
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-spc621d8hm3.dts
@@ -0,0 +1,328 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+
+/{
+	model = "ASRock SPC621D8HM3 BMC";
+	compatible = "asrock,spc621d8hm3-bmc", "aspeed,ast2500";
+
+	aliases {
+		serial4 = &uart5;
+
+		i2c20 = &i2c1mux0ch0;
+		i2c21 = &i2c1mux0ch1;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* BMC heartbeat */
+		led-0 {
+			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_GREEN>;
+			linux,default-trigger = "timer";
+		};
+
+		/* system fault */
+		led-1 {
+			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_FAULT;
+			color = <LED_COLOR_ID_RED>;
+			panic-indicator;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>; /* 50 MHz */
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x2f8>;
+	aspeed,lpc-interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+
+	nvmem-cells = <&eth0_macaddress>;
+	nvmem-cell-names = "mac-address";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* hardware monitor/thermal sensor */
+	temperature-sensor@29 {
+		compatible = "nuvoton,nct7802";
+		reg = <0x29>;
+	};
+
+	/* motherboard temp sensor (TMP1, near BMC) */
+	temperature-sensor@4c {
+		compatible = "nuvoton,w83773g";
+		reg = <0x4c>;
+	};
+
+	/* motherboard FRU eeprom */
+	eeprom@50 {
+		compatible = "st,24c128", "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <16>;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eth0_macaddress: macaddress@3f80 {
+				reg = <0x3f80 6>;
+			};
+		};
+	};
+
+	/* M.2 slot smbus mux */
+	i2c-mux@71 {
+		compatible = "nxp,pca9545";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c1mux0ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c1mux0ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&peci0 {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+		&pinctrl_pwm2_default
+		&pinctrl_pwm3_default
+		&pinctrl_pwm4_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+		/*  A */ "LOCATORLED_STATUS_N", "LOCATORBTN_N",
+			"BMC_READY_N", "FM_SPD_DDRCPU_LVLSHFT_EN",
+			"", "", "", "",
+		/*  B */ "NODE_ID_1", "NODE_ID_2", "PSU_FAN_FAIL_N", "",
+			"", "", "", "GPIO_RST",
+		/*  C */ "", "", "", "", "", "", "", "",
+		/*  D */ "FP_PWR_BTN_MUX_N", "FM_BMC_PWRBTN_OUT_N",
+			"FP_RST_BTN_N", "RST_BMC_RSTBTN_OUT_N",
+			"NMI_BTN_N", "BMC_NMI",
+			"", "",
+		/*  E */ "", "", "", "FM_ME_RCVR_N", "", "", "", "",
+		/*  F */ "BMC_SMB_SEL_N", "FM_CPU2_DISABLE_COD_N",
+			"FM_REMOTE_DEBUG_BMC_EN", "FM_CPU_ERR0_LVT3_EN",
+			"FM_CPU_ERR1_LVT3_EN", "FM_CPU_ERR2_LVT3_EN",
+			"FM_MEM_THERM_EVENT_CPU1_LVT3_N", "FM_MEM_THERM_EVENT_CPU2_LVT3_N",
+		/*  G */ "HWM_BAT_EN", "", "BMC_PHYRST_N", "FM_BIOS_SPI_BMC_CTRL",
+			"BMC_ALERT1_N", "BMC_ALERT2_N", "BMC_ALERT3_N", "IRQ_SML0_ALERT_N",
+		/*  H */ "BMC_SMB_PRESENT_1_N", "FM_PCH_CORE_VID_0", "FM_PCH_CORE_VID_1", "",
+			"FM_MFG_MODE", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN",
+		/*  I */ "IRQ_PVDDQ_ABCD_CPU1_VRHOT_LVC3_N", "IRQ_PVDDQ_ABCD_CPU2_VRHOT_LVC3_N",
+			"IRQ_PVDDQ_EFGH_CPU1_VRHOT_LVC3_N", "IRQ_PVDDQ_EFGH_CPU2_VRHOT_LVC3_N",
+			"", "", "", "",
+		/*  J */ "", "", "", "", "", "", "", "",
+		/*  K */ "", "", "", "", "", "", "", "",
+		/*  L */ "", "", "", "", "", "", "", "",
+		/*  M */ "FM_PVCCIN_CPU1_PWR_IN_ALERT_N", "FM_PVCCIN_CPU2_PWR_IN_ALERT_N",
+			"IRQ_PVCCIN_CPU1_VRHOT_LVC3_N", "IRQ_PVCCIN_CPU2_VRHOT_LVC3_N",
+			"FM_CPU1_PROCHOT_BMC_LVC3_N", "",
+			"FM_CPU1_MEMHOT_OUT_N", "FM_CPU2_MEMHOT_OUT_N",
+		/*  N */ "", "", "", "", "", "", "", "",
+		/*  O */ "", "", "", "", "", "", "", "",
+		/*  P */ "", "", "", "", "", "", "", "",
+		/*  Q */ "", "", "", "", "", "", "RST_GLB_RST_WARN_N", "PCIE_WAKE_N",
+		/*  R */ "", "", "FM_BMC_SUSACK_N", "FM_BMC_EUP_LOT6_N",
+			"", "FM_BMC_PCH_SCI_LPC_N", "", "",
+		/*  S */ "FM_DBP_PRESENT_N", "FM_CPU2_SKTOCC_LCT3_N",
+			"FM_CPU1_FIVR_FAULT_LVT3", "FM_CPU2_FIVR_FAULT_LVT3",
+			 "", "", "", "",
+		/*  T */ "", "", "", "", "", "", "", "",
+		/*  U */ "", "", "", "", "", "", "", "",
+		/*  V */ "", "", "", "", "", "", "", "",
+		/*  W */ "", "", "", "", "", "", "", "",
+		/*  X */ "", "", "", "", "", "", "", "",
+		/*  Y */ "FM_SLPS3_N", "FM_SLPS4_N", "", "FM_BMC_ONCTL_N_PLD",
+			"", "", "", "",
+		/*  Z */ "FM_CPU_MSMI_CATERR_LVT3_N", "", "SYSTEM_FAULT_LED_N", "BMC_THROTTLE_N",
+			"", "", "", "",
+		/* AA */ "FM_CPU1_THERMTRIP_LATCH_LVT3_N", "FM_CPU2_THERMTRIP_LATCH_LVT3_N",
+			"FM_BIOS_POST_COMPLT_N", "DBP_BMC_SYSPWROK",
+			"", "IRQ_SML0_ALERT_MUX_N",
+			"IRQ_SMI_ACTIVE_N", "IRQ_NMI_EVENT_N",
+		/* AB */ "FM_PCH_BMC_THERMTRIP_N", "PWRGD_SYS_PWROK",
+			"ME_OVERRIDE", "IRQ_BMC_PCH_SMI_LPC_N",
+			"", "", "", "",
+		/* AC */ "", "", "", "", "", "", "", "";
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default /* 3VSB */
+		&pinctrl_adc1_default	   /* 5VSB */
+		&pinctrl_adc2_default	   /* CPU1 */
+		&pinctrl_adc3_default	   /* NC */
+		&pinctrl_adc4_default	   /* VCCMABCD */
+		&pinctrl_adc5_default	   /* VCCMEFGH */
+		&pinctrl_adc6_default	   /* NC */
+		&pinctrl_adc7_default	   /* NC */
+		&pinctrl_adc8_default	   /* PVNN_PCH */
+		&pinctrl_adc9_default	   /* 1P05PCH */
+		&pinctrl_adc10_default	   /* 1P8PCH */
+		&pinctrl_adc11_default	   /* BAT */
+		&pinctrl_adc12_default	   /* 3V */
+		&pinctrl_adc13_default	   /* 5V */
+		&pinctrl_adc14_default	   /* 12V */
+		&pinctrl_adc15_default>;   /* GND */
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
new file mode 100644
index 000000000000..e61a6cb43438
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
@@ -0,0 +1,360 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Asrock Rack X570D4U BMC";
+	compatible = "asrock,x570d4u-bmc", "aspeed,ast2500";
+
+	aliases {
+		i2c40 = &i2c4mux0ch0;
+		i2c41 = &i2c4mux0ch1;
+		i2c42 = &i2c4mux0ch2;
+		i2c43 = &i2c4mux0ch3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		pci_memory: region@9a000000 {
+			no-map;
+			reg = <0x9a000000 0x00010000>; /* 64K */
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02800000>;	/* 40M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			/* led-heartbeat-n */
+			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_HEARTBEAT;
+			linux,default-trigger = "timer";
+		};
+
+		led-1 {
+			/* led-fault-n */
+			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_FAULT;
+			panic-indicator;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+			<&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>,
+			<&adc 10>, <&adc 11>, <&adc 12>;
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*  A */ "input-locatorled-n", "", "", "", "", "", "", "",
+	/*  B */ "input-bios-post-cmplt-n", "", "", "", "", "", "", "",
+	/*  C */ "", "", "", "", "", "", "control-locatorbutton-n", "",
+	/*  D */ "button-power-n", "control-power-n", "button-reset-n",
+		 "control-reset-n", "", "", "", "",
+	/*  E */ "", "", "", "", "", "", "", "",
+	/*  F */ "", "", "", "", "", "", "", "",
+	/*  G */ "output-hwm-vbat-enable", "input-id0-n", "input-id1-n",
+		 "input-id2-n", "input-aux-smb-alert-n", "",
+		 "input-psu-smb-alert-n", "",
+	/*  H */ "", "", "", "", "input-mfg-mode-n", "",
+		 "led-heartbeat-n", "input-case-open-n",
+	/*  I */ "", "", "", "", "", "", "", "",
+	/*  J */ "output-bmc-ready-n", "", "", "", "", "", "", "",
+	/*  K */ "", "", "", "", "", "", "", "",
+	/*  L */ "", "", "", "", "", "", "", "",
+	/*  M */ "", "", "", "", "", "", "", "",
+	/*  N */ "", "", "", "", "", "", "", "",
+	/*  O */ "", "", "", "", "", "", "", "",
+	/*  P */ "", "", "", "", "", "", "", "",
+	/*  Q */ "", "", "", "", "input-bmc-smb-present-n", "", "",
+		 "input-pcie-wake-n",
+	/*  R */ "", "", "", "", "", "", "", "",
+	/*  S */ "input-bmc-pchhot-n", "", "", "", "", "", "", "",
+	/*  T */ "", "", "", "", "", "", "", "",
+	/*  U */ "", "", "", "", "", "", "", "",
+	/*  V */ "", "", "", "", "", "", "", "",
+	/*  W */ "", "", "", "", "", "", "", "",
+	/*  X */ "", "", "", "", "", "", "", "",
+	/*  Y */ "input-sleep-s3-n", "input-sleep-s5-n", "", "", "", "",
+		 "", "",
+	/*  Z */ "", "", "led-fault-n", "output-bmc-throttle-n", "", "",
+		 "", "",
+	/* AA */ "input-cpu1-thermtrip-latch-n", "",
+		 "input-cpu1-prochot-n", "", "", "", "", "",
+	/* AB */ "", "input-power-good", "", "", "", "", "", "",
+	/* AC */ "", "", "", "", "", "", "", "";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+		spi-max-frequency = <10000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+
+	nvmem-cells = <&eth0_macaddress>;
+	nvmem-cell-names = "mac-address";
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii2_default &pinctrl_mdio2_default>;
+	use-ncsi;
+
+	nvmem-cells = <&eth1_macaddress>;
+	nvmem-cell-names = "mac-address";
+};
+
+&i2c0 {
+	/* SMBus on auxiliary panel header (AUX_PANEL1) */
+	status = "okay";
+};
+
+&i2c1 {
+	/* Hardware monitoring SMBus */
+	status = "okay";
+
+	w83773g@4c {
+		compatible = "nuvoton,w83773g";
+		reg = <0x4c>;
+	};
+};
+
+&i2c2 {
+	/* PSU SMBus (PSU_SMB1) */
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c4mux0ch0: i2c@0 {
+			/* SMBus on PCI express 16x slot */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c4mux0ch1: i2c@1 {
+			/* SMBus on PCI express 8x slot */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c4mux0ch2: i2c@2 {
+			/* Unknown */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c4mux0ch3: i2c@3 {
+			/* SMBus on PCI express 1x slot */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c5 {
+	/* SMBus on BMC connector (BMC_SMB_1) */
+	status = "okay";
+};
+
+&i2c7 {
+	/* FRU and SPD EEPROM SMBus */
+	status = "okay";
+
+	eeprom@57 {
+		compatible = "st,24c128", "atmel,24c128";
+		reg = <0x57>;
+		pagesize = <16>;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eth0_macaddress: macaddress@3f80 {
+				reg = <0x3f80 6>;
+			};
+
+			eth1_macaddress: macaddress@3f88 {
+				reg = <0x3f88 6>;
+			};
+		};
+	};
+};
+
+&i2c8 {
+	/* SMBus on intelligent platform management bus header (IPMB_1) */
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xca2>;
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&p2a {
+	status = "okay";
+	memory-region = <&pci_memory>;
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+				&pinctrl_pwm1_default
+				&pinctrl_pwm2_default
+				&pinctrl_pwm3_default
+				&pinctrl_pwm4_default
+				&pinctrl_pwm5_default>;
+
+	fan@0 {
+		/* FAN1 (4-pin) */
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		/* FAN2 (4-pin) */
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		/* FAN3 (4-pin) */
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		/* FAN4 (6-pin) */
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0b>;
+	};
+
+	fan@4 {
+		/* FAN6 (6-pin) */
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x0d>;
+	};
+
+	fan@5 {
+		/* FAN5 (6-pin) */
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05 0x0c>;
+	};
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default       /* 3VSB */
+			&pinctrl_adc1_default    /* 5VSB */
+			&pinctrl_adc2_default    /* VCPU */
+			&pinctrl_adc3_default    /* VSOC */
+			&pinctrl_adc4_default    /* VCCM */
+			&pinctrl_adc5_default    /* APU-VDDP */
+			&pinctrl_adc6_default    /* PM-VDD-CLDO */
+			&pinctrl_adc7_default    /* PM-VDDCR-S5 */
+			&pinctrl_adc8_default    /* PM-VDDCR */
+			&pinctrl_adc9_default    /* VBAT */
+			&pinctrl_adc10_default   /* 3V */
+			&pinctrl_adc11_default   /* 5V */
+			&pinctrl_adc12_default>; /* 12V */
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts
new file mode 100644
index 000000000000..64f4ed07c7d2
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts
@@ -0,0 +1,581 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2024 ASUS Corp.
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include "aspeed-g6-pinctrl.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "ASUS-X4TF";
+	compatible = "asus,x4tf-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial4:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		video_engine_memory: video {
+			size = <0x04000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+				<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+				<&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+				<&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-heartbeat {
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-uid {
+			gpios = <&gpio0 ASPEED_GPIO(P, 1) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+			default-state = "off";
+		};
+
+		led-status_Y {
+			gpios = <&gpio1 ASPEED_GPIO(B, 1) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-sys_boot_status {
+			gpios = <&gpio1 ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&adc0 {
+	vref = <2500>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	vref = <2500>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&peci0 {
+	status = "okay";
+};
+
+&lpc_snoop {
+	snoop-ports = <0x80>;
+	status = "okay";
+};
+
+&mac2 {
+	status = "okay";
+	phy-mode = "rmii";
+	use-ncsi;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+};
+
+&mac3 {
+	status = "okay";
+	phy-mode = "rmii";
+	use-ncsi;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "bios";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp75";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp75";
+		reg = <0x49>;
+	};
+
+	pca9555_4_20: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca9555_4_22: gpio@22 {
+		compatible = "nxp,pca9555";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca9555_4_24: gpio@24 {
+		compatible = "nxp,pca9555";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*A0 - A3 0*/	"", "STRAP_BMC_BATTERY_GPIO1", "", "",
+		/*A4 - A7 4*/	"", "", "", "",
+		/*B0 - B7 8*/	"", "", "", "", "", "", "", "";
+	};
+
+	pca9555_4_26: gpio@26 {
+		compatible = "nxp,pca9555";
+		reg = <0x26>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		status = "okay";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel_1: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_2: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_3: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_4: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	pca9555_5_24: gpio@24 {
+		compatible = "nxp,pca9555";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	i2c-mux@70  {
+		compatible = "nxp,pca9546";
+		status = "okay";
+		reg = <0x70 >;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel_5: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			pca9555_5_5_20: gpio@20 {
+				compatible = "nxp,pca9555";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names =
+					"", "", "", "", "", "", "", "",
+					"", "", "SYS_FAN6", "SYS_FAN5",
+					"SYS_FAN4", "SYS_FAN3",
+					"SYS_FAN2", "SYS_FAN1";
+			};
+
+			pca9555_5_5_21: gpio@21 {
+				compatible = "nxp,pca9555";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina219";
+				reg = <0x44>;
+				shunt-resistor = <2>;
+			};
+		};
+
+		channel_6: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_7: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_8: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	pca9555_6_27: gpio@27 {
+		compatible = "nxp,pca9555";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca9555_6_20: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*A0 0*/	"", "", "", "", "", "", "", "",
+		/*B0 8*/	"Drive_NVMe1", "Drive_NVMe2", "", "",
+		/*B4 12*/	"", "", "", "";
+	};
+
+	pca9555_6_21: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		status = "okay";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		idle-state = <1>;
+
+		channel_9: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+
+			temperature-sensor@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+
+			power-monitor@40 {
+				compatible = "ti,ina219";
+				reg = <0x40>;
+				shunt-resistor = <2>;
+			};
+
+			power-monitor@41 {
+				compatible = "ti,ina219";
+				reg = <0x41>;
+				shunt-resistor = <5>;
+			};
+		};
+
+		channel_10: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_11: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_12: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		status = "okay";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		channel_13: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_14: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_15: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_16: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		status = "okay";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		channel_17: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_18: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+
+			power-monitor@41 {
+				compatible = "ti,ina219";
+				reg = <0x41>;
+				shunt-resistor = <5>;
+			};
+		};
+
+		channel_19: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_20: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c14 {
+	status = "okay";
+	multi-master;
+
+	eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c08";
+		reg = <0x51>;
+	};
+};
+
+&sgpiom0 {
+	status = "okay";
+	ngpios = <128>;
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&sdc {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&kcs1 {
+	aspeed,lpc-io-reg = <0xca0>;
+	status = "okay";
+};
+
+&kcs2 {
+	aspeed,lpc-io-reg = <0xca8>;
+	status = "okay";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xca2>;
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0 0*/	"", "", "", "", "", "", "", "",
+	/*B0 8*/	"", "", "", "", "", "", "PS_PWROK", "",
+	/*C0 16*/	"", "", "", "", "", "", "", "",
+	/*D0 24*/	"", "", "", "", "", "", "", "",
+	/*E0 32*/	"", "", "", "", "", "", "", "",
+	/*F0 40*/	"", "", "", "", "", "", "", "",
+	/*G0 48*/	"", "", "", "", "", "", "", "",
+	/*H0 56*/	"", "", "", "", "", "", "", "",
+	/*I0 64*/	"", "", "", "", "", "", "", "",
+	/*J0 72*/	"", "", "", "", "", "", "", "",
+	/*K0 80*/	"", "", "", "", "", "", "", "",
+	/*L0 88*/	"", "", "", "", "", "", "", "",
+	/*M0 96*/	"", "", "", "", "", "", "", "",
+	/*N0 104*/	"", "", "", "",
+	/*N4 108*/	"POST_COMPLETE", "ESR1_GPIO_AST_SPISEL", "", "",
+	/*O0 112*/	"", "", "", "", "", "", "", "",
+	/*P0 120*/	"ID_BUTTON", "ID_OUT", "POWER_BUTTON", "POWER_OUT",
+	/*P4 124*/	"RESET_BUTTON", "RESET_OUT", "", "HEARTBEAT",
+	/*Q0 128*/	"", "", "", "", "", "", "", "",
+	/*R0 136*/	"", "", "", "", "", "", "", "",
+	/*S0 144*/	"", "", "", "", "", "", "", "",
+	/*T0 152*/	"", "", "", "", "", "", "", "",
+	/*U0 160*/	"", "", "", "", "", "", "", "",
+	/*V0 168*/	"", "", "", "", "", "", "", "",
+	/*W0 176*/	"", "", "", "", "", "", "", "",
+	/*X0 184*/	"", "", "", "", "", "", "", "",
+	/*Y0 192*/	"", "", "", "", "", "", "", "",
+	/*Z0 200*/	"", "", "", "", "", "", "", "";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-bytedance-g220a.dts
index 01dace8f5e5f..54a5509b04f1 100644
--- a/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-bytedance-g220a.dts
@@ -100,7 +100,7 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		burn-in-signal {
+		event-burn-in-signal {
 			label = "burn-in";
 			gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(R, 5)>;
@@ -111,139 +111,139 @@
 		compatible = "gpio-keys-polled";
 		poll-interval = <1000>;
 
-		rear-riser1-presence {
+		event-rear-riser1-presence {
 			label = "rear-riser1-presence";
 			gpios = <&pca0 1 GPIO_ACTIVE_LOW>;
 			linux,code = <1>;
 		};
 
-		alrt-pvddq-cpu0 {
+		event-alrt-pvddq-cpu0 {
 			label = "alrt-pvddq-cpu0";
 			gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
 			linux,code = <2>;
 		};
 
-		rear-riser0-presence {
+		event-rear-riser0-presence {
 			label = "rear-riser0-presence";
 			gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
 			linux,code = <3>;
 		};
 
-		fault-pvddq-cpu0 {
+		event-fault-pvddq-cpu0 {
 			label = "fault-pvddq-cpu0";
 			gpios = <&pca0 10 GPIO_ACTIVE_LOW>;
 			linux,code = <4>;
 		};
 
-		alrt-pvddq-cpu1 {
+		event-alrt-pvddq-cpu1 {
 			label = "alrt-pvddq-cpu1";
 			gpios = <&pca0 11 GPIO_ACTIVE_LOW>;
 			linux,code = <5>;
 		};
 
-		fault-pvddq-cpu1 {
+		event-fault-pvddq-cpu1 {
 			label = "alrt-pvddq-cpu1";
 			gpios = <&pca0 12 GPIO_ACTIVE_LOW>;
 			linux,code = <6>;
 		};
 
-		fault-pvccin-cpu1 {
+		event-fault-pvccin-cpu1 {
 			label = "fault-pvccin-cpuq";
 			gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
 			linux,code = <7>;
 		};
 
-		bmc-rom0-wp {
+		event-bmc-rom0-wp {
 			label = "bmc-rom0-wp";
 			gpios = <&pca1 0 GPIO_ACTIVE_LOW>;
 			linux,code = <8>;
 		};
 
-		bmc-rom1-wp {
+		event-bmc-rom1-wp {
 			label = "bmc-rom1-wp";
 			gpios = <&pca1 1 GPIO_ACTIVE_LOW>;
 			linux,code = <9>;
 		};
 
-		fan0-presence {
+		event-fan0-presence {
 			label = "fan0-presence";
 			gpios = <&pca1 2 GPIO_ACTIVE_LOW>;
 			linux,code = <10>;
 		};
 
-		fan1-presence {
+		event-fan1-presence {
 			label = "fan1-presence";
 			gpios = <&pca1 3 GPIO_ACTIVE_LOW>;
 			linux,code = <11>;
 		};
 
-		fan2-presence {
+		event-fan2-presence {
 			label = "fan2-presence";
 			gpios = <&pca1 4 GPIO_ACTIVE_LOW>;
 			linux,code = <12>;
 		};
 
-		fan3-presence {
+		event-fan3-presence {
 			label = "fan3-presence";
 			gpios = <&pca1 5 GPIO_ACTIVE_LOW>;
 			linux,code = <13>;
 		};
 
-		fan4-presence {
+		event-fan4-presence {
 			label = "fan4-presence";
 			gpios = <&pca1 6 GPIO_ACTIVE_LOW>;
 			linux,code = <14>;
 		};
 
-		fan5-presence {
+		event-fan5-presence {
 			label = "fan5-presence";
 			gpios = <&pca1 7 GPIO_ACTIVE_LOW>;
 			linux,code = <15>;
 		};
 
-		front-bp1-presence {
+		event-front-bp1-presence {
 			label = "front-bp1-presence";
 			gpios = <&pca1 8 GPIO_ACTIVE_LOW>;
 			linux,code = <16>;
 		};
 
-		rear-bp-presence {
+		event-rear-bp-presence {
 			label = "rear-bp-presence";
 			gpios = <&pca1 9 GPIO_ACTIVE_LOW>;
 			linux,code = <17>;
 		};
 
-		fault-pvccin-cpu0 {
+		event-fault-pvccin-cpu0 {
 			label = "fault-pvccin-cpu0";
 			gpios = <&pca1 10 GPIO_ACTIVE_LOW>;
 			linux,code = <18>;
 		};
 
-		alrt-p1v05-pvcc {
+		event-alrt-p1v05-pvcc {
 			label = "alrt-p1v05-pvcc1";
 			gpios = <&pca1 11 GPIO_ACTIVE_LOW>;
 			linux,code = <19>;
 		};
 
-		fault-p1v05-pvccio {
+		event-fault-p1v05-pvccio {
 			label = "alrt-p1v05-pvcc1";
 			gpios = <&pca1 12 GPIO_ACTIVE_LOW>;
 			linux,code = <20>;
 		};
 
-		alrt-p1v8-pvccio {
+		event-alrt-p1v8-pvccio {
 			label = "alrt-p1v8-pvccio";
 			gpios = <&pca1 13 GPIO_ACTIVE_LOW>;
 			linux,code = <21>;
 		};
 
-		fault-p1v8-pvccio {
+		event-fault-p1v8-pvccio {
 			label = "fault-p1v8-pvccio";
 			gpios = <&pca1 14 GPIO_ACTIVE_LOW>;
 			linux,code = <22>;
 		};
 
-		front-bp0-presence {
+		event-front-bp0-presence {
 			label = "front-bp0-presence";
 			gpios = <&pca1 15 GPIO_ACTIVE_LOW>;
 			linux,code = <23>;
@@ -260,6 +260,13 @@
 		spi-max-frequency = <50000000>;
 #include "openbmc-flash-layout-64.dtsi"
 	};
+	flash@1 {
+		status = "okay";
+		label = "alt-bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
 };
 
 &spi1 {
@@ -278,6 +285,11 @@
 	status = "okay";
 };
 
+&wdt2 {
+	status = "okay";
+	aspeed,alt-boot;
+};
+
 &gpio {
 	status = "okay";
 	gpio-line-names =
@@ -412,7 +424,7 @@
 
 &i2c3 {
 	status = "okay";
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
 		#address-cells = <1>;
@@ -459,7 +471,7 @@
 
 &i2c6 {
 	status = "okay";
-	i2c-switch@72 {
+	i2c-mux@72 {
 		compatible = "nxp,pca9548";
 		reg = <0x72>;
 		#address-cells = <1>;
@@ -512,7 +524,7 @@
 		};
 	};
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
 		#address-cells = <1>;
@@ -521,7 +533,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
-			i2c-switch@71 {
+			i2c-mux@71 {
 				compatible = "nxp,pca9546";
 				reg = <0x71>;
 				#address-cells = <1>;
@@ -557,7 +569,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <1>;
-			i2c-switch@71 {
+			i2c-mux@71 {
 				compatible = "nxp,pca9546";
 				reg = <0x71>;
 				#address-cells = <1>;
@@ -593,7 +605,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2>;
-			i2c-switch@71 {
+			i2c-mux@71 {
 				compatible = "nxp,pca9546";
 				reg = <0x71>;
 				#address-cells = <1>;
@@ -628,7 +640,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <3>;
-			i2c-switch@71 {
+			i2c-mux@71 {
 				compatible = "nxp,pca9546";
 				reg = <0x71>;
 				#address-cells = <1>;
@@ -796,7 +808,7 @@
 
 &i2c10 {
 	status = "okay";
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
 		#address-cells = <1>;
@@ -826,7 +838,7 @@
 		};
 	};
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9546";
 		reg = <0x71>;
 		#address-cells = <1>;
@@ -903,14 +915,14 @@
 };
 
 &gpio {
-	pin_gpio_i3 {
+	pin-gpio-i3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "NCSI_BMC_R_SEL";
 	};
 
-	pin_gpio_b6 {
+	pin-gpio-b6-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(B, 6) GPIO_ACTIVE_HIGH>;
 		output-low;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-delta-ahe50dc.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-delta-ahe50dc.dts
new file mode 100644
index 000000000000..cce8d0416dc8
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-delta-ahe50dc.dts
@@ -0,0 +1,418 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g4.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+#define EFUSE_OUTPUT(n)					\
+	efuse##n {					\
+		compatible = "regulator-output";	\
+		vout-supply = <&efuse##n>;		\
+	}
+
+#define __stringify(x) #x
+
+#define EFUSE(hexaddr, num)							\
+	efuse@##hexaddr {							\
+		compatible = "ti,lm25066";					\
+		reg = <0x##hexaddr>;						\
+		shunt-resistor-micro-ohms = <675>;				\
+		regulators {							\
+			efuse##num: vout {					\
+				regulator-name = __stringify(efuse##num##-reg);	\
+			};							\
+		};								\
+	}
+
+/{
+	model = "Delta Power AHE-50DC";
+	compatible = "delta,ahe50dc-bmc", "aspeed,ast2400";
+
+	aliases {
+		serial4 = &uart5;
+
+		/*
+		 * pca9541-arbitrated logical i2c buses are numbered as the
+		 * corresponding physical bus plus 20
+		 */
+		i2c20 = &i2carb0;
+		i2c21 = &i2carb1;
+		i2c22 = &i2carb2;
+		i2c23 = &i2carb3;
+		i2c24 = &i2carb4;
+		i2c26 = &i2carb6;
+		i2c27 = &i2carb7;
+		i2c28 = &i2carb8;
+		i2c32 = &i2carb12;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+		bootargs = "console=ttyS2,115200n8 earlycon";
+	};
+
+	memory@40000000 {
+		reg = <0x40000000 0x10000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		panic {
+			gpios = <&gpio ASPEED_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "panic";
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+			<&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>;
+	};
+
+	EFUSE_OUTPUT(01);
+	EFUSE_OUTPUT(02);
+	EFUSE_OUTPUT(03);
+	EFUSE_OUTPUT(04);
+	EFUSE_OUTPUT(05);
+	EFUSE_OUTPUT(06);
+	EFUSE_OUTPUT(07);
+	EFUSE_OUTPUT(08);
+	EFUSE_OUTPUT(09);
+	EFUSE_OUTPUT(10);
+	EFUSE_OUTPUT(11);
+	EFUSE_OUTPUT(12);
+	EFUSE_OUTPUT(13);
+	EFUSE_OUTPUT(14);
+	EFUSE_OUTPUT(15);
+	EFUSE_OUTPUT(16);
+	EFUSE_OUTPUT(17);
+	EFUSE_OUTPUT(18);
+	EFUSE_OUTPUT(19);
+	EFUSE_OUTPUT(20);
+	EFUSE_OUTPUT(21);
+	EFUSE_OUTPUT(22);
+	EFUSE_OUTPUT(23);
+	EFUSE_OUTPUT(24);
+	EFUSE_OUTPUT(25);
+	EFUSE_OUTPUT(26);
+	EFUSE_OUTPUT(27);
+	EFUSE_OUTPUT(28);
+	EFUSE_OUTPUT(29);
+	EFUSE_OUTPUT(30);
+	EFUSE_OUTPUT(31);
+	EFUSE_OUTPUT(32);
+	EFUSE_OUTPUT(33);
+	EFUSE_OUTPUT(34);
+	EFUSE_OUTPUT(35);
+	EFUSE_OUTPUT(36);
+	EFUSE_OUTPUT(37);
+	EFUSE_OUTPUT(38);
+	EFUSE_OUTPUT(39);
+	EFUSE_OUTPUT(40);
+	EFUSE_OUTPUT(41);
+	EFUSE_OUTPUT(42);
+	EFUSE_OUTPUT(43);
+	EFUSE_OUTPUT(44);
+	EFUSE_OUTPUT(45);
+	EFUSE_OUTPUT(46);
+	EFUSE_OUTPUT(47);
+	EFUSE_OUTPUT(48);
+	EFUSE_OUTPUT(49);
+	EFUSE_OUTPUT(50);
+
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "flash0";
+		spi-max-frequency = <50000000>; // 50 MHz
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@79 {
+		compatible = "nxp,pca9541";
+		reg = <0x79>;
+
+		i2carb0: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* lm25066 efuses @ 10-17, 40-47, 50-57 */
+			EFUSE(10, 03);
+			EFUSE(11, 04);
+			EFUSE(12, 01);
+			EFUSE(13, 02);
+			EFUSE(14, 13);
+			EFUSE(15, 14);
+			EFUSE(16, 15);
+			EFUSE(17, 16);
+			EFUSE(40, 12);
+			EFUSE(41, 11);
+			EFUSE(42, 10);
+			EFUSE(43, 09);
+			EFUSE(44, 08);
+			EFUSE(45, 07);
+			EFUSE(46, 05);
+			EFUSE(47, 06);
+			EFUSE(50, 17);
+			EFUSE(51, 18);
+			EFUSE(52, 20);
+			EFUSE(53, 19);
+			EFUSE(54, 22);
+			EFUSE(55, 21);
+			EFUSE(56, 24);
+			EFUSE(57, 23);
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@72 {
+		compatible = "nxp,pca9541";
+		reg = <0x72>;
+
+		i2carb1: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@73 {
+		compatible = "nxp,pca9541";
+		reg = <0x73>;
+
+		i2carb2: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@74 {
+		compatible = "nxp,pca9541";
+		reg = <0x74>;
+
+		i2carb3: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@7a {
+		compatible = "nxp,pca9541";
+		reg = <0x7a>;
+
+		i2carb4: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio@20 {
+				compatible = "nxp,pca9534";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			/* lm25066 efuses @ 10-17, 40-47, 50-57, 59, 5a */
+			EFUSE(10, 27);
+			EFUSE(11, 28);
+			EFUSE(12, 25);
+			EFUSE(13, 26);
+			EFUSE(14, 37);
+			EFUSE(15, 38);
+			EFUSE(16, 39);
+			EFUSE(17, 40);
+			EFUSE(40, 36);
+			EFUSE(41, 35);
+			EFUSE(42, 34);
+			EFUSE(43, 33);
+			EFUSE(44, 32);
+			EFUSE(45, 31);
+			EFUSE(46, 29);
+			EFUSE(47, 30);
+			EFUSE(50, 41);
+			EFUSE(51, 42);
+			EFUSE(52, 44);
+			EFUSE(53, 43);
+			EFUSE(54, 46);
+			EFUSE(55, 45);
+			EFUSE(56, 48);
+			EFUSE(57, 47);
+			EFUSE(59, 49);
+			EFUSE(5a, 50);
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@75 {
+		compatible = "nxp,pca9541";
+		reg = <0x75>;
+
+		i2carb6: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@76 {
+		compatible = "nxp,pca9541";
+		reg = <0x76>;
+
+		i2carb7: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@7c {
+		compatible = "nxp,pca9541";
+		reg = <0x7c>;
+
+		i2carb8: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fancontrol@30 {
+				compatible = "delta,ahe50dc-fan";
+				reg = <0x30>;
+			};
+
+			/* Baseboard FRU eeprom */
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+&i2c12 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@71 {
+		compatible = "nxp,pca9541";
+		reg = <0x71>;
+
+		i2carb12: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+		/*  A */ "", "", "", "", "", "", "", "",
+		/*  B */ "", "", "", "", "", "", "", "",
+		/*  C */ "RESET_PEER_N", "HEARTBEAT_OUT", "", "", "", "", "", "",
+		/*  D */ "", "", "", "", "", "", "", "",
+		/*  E */ "DOOM_N", "", "", "", "", "LED_PWR_BLUE", "", "",
+		/*  F */ "", "", "", "", "", "", "", "",
+		/*  G */ "", "", "", "", "", "", "", "",
+		/*  H */ "", "", "", "", "", "", "", "",
+		/*  I */ "", "", "", "", "", "", "", "",
+		/*  J */ "", "", "BMC_ID", "", "", "", "", "",
+		/*  K */ "", "", "", "", "", "", "", "",
+		/*  L */ "", "", "", "", "", "", "", "",
+		/*  M */ "", "", "", "", "", "", "", "",
+		/*  N */ "", "", "", "", "", "", "", "",
+		/*  O */ "", "", "", "", "", "", "", "",
+		/*  P */ "LED_GREEN", "", "LED_RED", "", "", "", "", "",
+		/*  Q */ "", "", "", "", "", "", "", "",
+		/*  R */ "", "", "", "", "", "", "", "",
+		/*  S */ "", "", "", "", "", "", "", "",
+		/*  T */ "", "", "", "", "", "", "", "",
+		/*  U */ "", "", "", "", "", "", "", "",
+		/*  V */ "", "", "", "", "", "", "", "",
+		/*  W */ "", "", "", "", "", "", "", "",
+		/*  X */ "", "", "", "", "", "", "", "",
+		/*  Y */ "HEARTBEAT_IN", "BOARDREV0", "BOARDREV1", "",
+		/*  Z */ "", "", "", "", "", "", "", "",
+		/* AA */ "", "", "", "", "", "", "", "",
+		/* AB */ "", "", "", "";
+
+	/*
+	 * I don't rightly know what this GPIO really *is*, but setting it to
+	 * zero causes the fans to run at full speed, after which setting it
+	 * back to one causes a power output glitch, so install a hog to keep
+	 * it at one as a failsafe to ensure nothing accidentally touches it.
+	 */
+	doom-guardrail-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(E, 0) GPIO_ACTIVE_LOW>;
+		output-low;
+	};
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		&pinctrl_adc1_default
+		&pinctrl_adc2_default
+		&pinctrl_adc3_default
+		&pinctrl_adc4_default
+		&pinctrl_adc5_default
+		&pinctrl_adc6_default
+		&pinctrl_adc7_default
+		&pinctrl_adc8_default
+		&pinctrl_adc9_default>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts
new file mode 100644
index 000000000000..24969c82d05e
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts
@@ -0,0 +1,1090 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2021 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/usb/pd.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Bletchley BMC";
+	compatible = "facebook,bletchley-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		bootargs = "console=ttyS4,57600n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			<&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+			<&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
+	};
+
+	spi1_gpio: spi1-gpio {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-sck = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		gpio-mosi = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		gpio-miso = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+
+	front_gpio_leds {
+		compatible = "gpio-leds";
+		sys_log_id {
+			default-state = "off";
+			gpios = <&front_leds 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	fan_gpio_leds {
+		compatible = "gpio-leds";
+		fan0_blue {
+			retain-state-shutdown;
+			default-state = "on";
+			gpios = <&fan_leds 8 GPIO_ACTIVE_HIGH>;
+		};
+		fan1_blue {
+			retain-state-shutdown;
+			default-state = "on";
+			gpios = <&fan_leds 9 GPIO_ACTIVE_HIGH>;
+		};
+		fan2_blue {
+			retain-state-shutdown;
+			default-state = "on";
+			gpios = <&fan_leds 10 GPIO_ACTIVE_HIGH>;
+		};
+		fan3_blue {
+			retain-state-shutdown;
+			default-state = "on";
+			gpios = <&fan_leds 11 GPIO_ACTIVE_HIGH>;
+		};
+		fan0_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&fan_leds 12 GPIO_ACTIVE_HIGH>;
+		};
+		fan1_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&fan_leds 13 GPIO_ACTIVE_HIGH>;
+		};
+		fan2_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&fan_leds 14 GPIO_ACTIVE_HIGH>;
+		};
+		fan3_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&fan_leds 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sled1_gpio_leds {
+		compatible = "gpio-leds";
+		sled1_amber {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled1_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled1_blue {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled1_leds 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sled2_gpio_leds {
+		compatible = "gpio-leds";
+		sled2_amber {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled2_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled2_blue {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled2_leds 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sled3_gpio_leds {
+		compatible = "gpio-leds";
+		sled3_amber {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled3_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled3_blue {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled3_leds 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sled4_gpio_leds {
+		compatible = "gpio-leds";
+		sled4_amber {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled4_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled4_blue {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled4_leds 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sled5_gpio_leds {
+		compatible = "gpio-leds";
+		sled5_amber {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled5_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled5_blue {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled5_leds 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sled6_gpio_leds {
+		compatible = "gpio-leds";
+		sled6_amber {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled6_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled6_blue {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled6_leds 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		presence-sled1 {
+			label = "presence-sled1";
+			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 2)>;
+		};
+		presence-sled2 {
+			label = "presence-sled2";
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 3)>;
+		};
+		presence-sled3 {
+			label = "presence-sled3";
+			gpios = <&gpio0 ASPEED_GPIO(H, 4) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 4)>;
+		};
+		presence-sled4 {
+			label = "presence-sled4";
+			gpios = <&gpio0 ASPEED_GPIO(H, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 5)>;
+		};
+		presence-sled5 {
+			label = "presence-sled5";
+			gpios = <&gpio0 ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 6)>;
+		};
+		presence-sled6 {
+			label = "presence-sled6";
+			gpios = <&gpio0 ASPEED_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 7)>;
+		};
+	};
+
+	vbus_sled1: vbus_sled1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled1_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled2: vbus_sled2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled2";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled2_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled3: vbus_sled3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled3";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled3_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled4: vbus_sled4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled4";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled4_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled5: vbus_sled5 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled5";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled5_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled6: vbus_sled6 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled6";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled6_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&mac2 {
+	status = "okay";
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii3_default>;
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&spi2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	mp5023@40 {
+		compatible = "mps,mp5023";
+		reg = <0x40>;
+	};
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	sled1_ioexp41: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED1_SWD_MUX", "SLED1_XRES_SWD_N",
+		"SLED1_CLKREQ_N", "SLED1_PCIE_PWR_EN";
+	};
+
+	sled1_ioexp: pca9539@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 0) IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"SLED1_MS_DETECT1","SLED1_VBUS_BMC_EN","SLED1_INA230_ALERT","SLED1_P12V_STBY_ALERT",
+		"SLED1_SSD_ALERT","SLED1_MS_DETECT0","SLED1_RST_CCG5","SLED1_FUSB302_INT",
+		"SLED1_MD_STBY_RESET","SLED1_MD_IOEXP_EN_FAULT","SLED1_MD_DIR","SLED1_MD_DECAY",
+		"SLED1_MD_MODE1","SLED1_MD_MODE2","SLED1_MD_MODE3","power-host1";
+	};
+
+	sled1_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-sled1-amber","led-sled1-blue","SLED1_RST_IOEXP","SLED1_MD_REF_PWM",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+
+	sled1_fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(B, 0) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled1>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>;
+			power-role = "dual";
+			try-power-role = "sink";
+			data-role = "dual";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			op-sink-microwatt = <10000000>;
+		};
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	mp5023@40 {
+		compatible = "mps,mp5023";
+		reg = <0x40>;
+	};
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	sled2_ioexp41: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED2_SWD_MUX", "SLED2_XRES_SWD_N",
+		"SLED2_CLKREQ_N", "SLED2_PCIE_PWR_EN";
+	};
+
+	sled2_ioexp: pca9539@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 1) IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"SLED2_MS_DETECT1","SLED2_VBUS_BMC_EN","SLED2_INA230_ALERT","SLED2_P12V_STBY_ALERT",
+		"SLED2_SSD_ALERT","SLED2_MS_DETECT0","SLED2_RST_CCG5","SLED2_FUSB302_INT",
+		"SLED2_MD_STBY_RESET","SLED2_MD_IOEXP_EN_FAULT","SLED2_MD_DIR","SLED2_MD_DECAY",
+		"SLED2_MD_MODE1","SLED2_MD_MODE2","SLED2_MD_MODE3","power-host2";
+	};
+
+	sled2_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-sled2-amber","led-sled2-blue","SLED2_RST_IOEXP","SLED2_MD_REF_PWM",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+
+	sled2_fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(B, 1) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled2>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>;
+			power-role = "dual";
+			try-power-role = "sink";
+			data-role = "dual";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			op-sink-microwatt = <10000000>;
+		};
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	mp5023@40 {
+		compatible = "mps,mp5023";
+		reg = <0x40>;
+	};
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	sled3_ioexp41: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED3_SWD_MUX", "SLED3_XRES_SWD_N",
+		"SLED3_CLKREQ_N", "SLED3_PCIE_PWR_EN";
+	};
+
+	sled3_ioexp: pca9539@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 2) IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"SLED3_MS_DETECT1","SLED3_VBUS_BMC_EN","SLED3_INA230_ALERT","SLED3_P12V_STBY_ALERT",
+		"SLED3_SSD_ALERT","SLED3_MS_DETECT0","SLED3_RST_CCG5","SLED3_FUSB302_INT",
+		"SLED3_MD_STBY_RESET","SLED3_MD_IOEXP_EN_FAULT","SLED3_MD_DIR","SLED3_MD_DECAY",
+		"SLED3_MD_MODE1","SLED3_MD_MODE2","SLED3_MD_MODE3","power-host3";
+	};
+
+	sled3_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-sled3-amber","led-sled3-blue","SLED3_RST_IOEXP","SLED3_MD_REF_PWM",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+
+	sled3_fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(B, 7) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled3>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>;
+			power-role = "dual";
+			try-power-role = "sink";
+			data-role = "dual";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			op-sink-microwatt = <10000000>;
+		};
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	mp5023@40 {
+		compatible = "mps,mp5023";
+		reg = <0x40>;
+	};
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	sled4_ioexp41: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED4_SWD_MUX", "SLED4_XRES_SWD_N",
+		"SLED4_CLKREQ_N", "SLED4_PCIE_PWR_EN";
+	};
+
+	sled4_ioexp: pca9539@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 3) IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"SLED4_MS_DETECT1","SLED4_VBUS_BMC_EN","SLED4_INA230_ALERT","SLED4_P12V_STBY_ALERT",
+		"SLED4_SSD_ALERT","SLED4_MS_DETECT0","SLED4_RST_CCG5","SLED4_FUSB302_INT",
+		"SLED4_MD_STBY_RESET","SLED4_MD_IOEXP_EN_FAULT","SLED4_MD_DIR","SLED4_MD_DECAY",
+		"SLED4_MD_MODE1","SLED4_MD_MODE2","SLED4_MD_MODE3","power-host4";
+	};
+
+	sled4_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-sled4-amber","led-sled4-blue","SLED4_RST_IOEXP","SLED4_MD_REF_PWM",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+
+	sled4_fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(S, 7) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled4>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>;
+			power-role = "dual";
+			try-power-role = "sink";
+			data-role = "dual";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			op-sink-microwatt = <10000000>;
+		};
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	mp5023@40 {
+		compatible = "mps,mp5023";
+		reg = <0x40>;
+	};
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	sled5_ioexp41: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED5_SWD_MUX", "SLED5_XRES_SWD_N",
+		"SLED5_CLKREQ_N", "SLED5_PCIE_PWR_EN";
+	};
+
+	sled5_ioexp: pca9539@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 4) IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"SLED5_MS_DETECT1","SLED5_VBUS_BMC_EN","SLED5_INA230_ALERT","SLED5_P12V_STBY_ALERT",
+		"SLED5_SSD_ALERT","SLED5_MS_DETECT0","SLED5_RST_CCG5","SLED5_FUSB302_INT",
+		"SLED5_MD_STBY_RESET","SLED5_MD_IOEXP_EN_FAULT","SLED5_MD_DIR","SLED5_MD_DECAY",
+		"SLED5_MD_MODE1","SLED5_MD_MODE2","SLED5_MD_MODE3","power-host5";
+	};
+
+	sled5_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-sled5-amber","led-sled5-blue","SLED5_RST_IOEXP","SLED5_MD_REF_PWM",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+
+	sled5_fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(Y, 3) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled5>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>;
+			power-role = "dual";
+			try-power-role = "sink";
+			data-role = "dual";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			op-sink-microwatt = <10000000>;
+		};
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	mp5023@40 {
+		compatible = "mps,mp5023";
+		reg = <0x40>;
+	};
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	sled6_ioexp41: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED6_SWD_MUX", "SLED6_XRES_SWD_N",
+		"SLED6_CLKREQ_N", "SLED6_PCIE_PWR_EN";
+	};
+
+	sled6_ioexp: pca9539@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 5) IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"SLED6_MS_DETECT1","SLED6_VBUS_BMC_EN","SLED6_INA230_ALERT","SLED6_P12V_STBY_ALERT",
+		"SLED6_SSD_ALERT","SLED6_MS_DETECT0","SLED6_RST_CCG5","SLED6_FUSB302_INT",
+		"SLED6_MD_STBY_RESET","SLED6_MD_IOEXP_EN_FAULT","SLED6_MD_DIR","SLED6_MD_DECAY",
+		"SLED6_MD_MODE1","SLED6_MD_MODE2","SLED6_MD_MODE3","power-host6";
+	};
+
+	sled6_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-sled6-amber","led-sled6-blue","SLED6_RST_IOEXP","SLED6_MD_REF_PWM",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+
+	sled6_fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 7) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled6>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>;
+			power-role = "dual";
+			try-power-role = "sink";
+			data-role = "dual";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			op-sink-microwatt = <10000000>;
+		};
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+
+	rtc@51 {
+		/* in-chip rtc disabled, use external rtc (battery-backed) */
+		compatible = "nxp,pcf85263";
+		reg = <0x51>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	front_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-fault-identify","power-p5v-stby-good",
+		"power-p1v0-dvdd-good","power-p1v0-avdd-good",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	adm1278@11 {
+		compatible = "adi,adm1278";
+		reg = <0x11>;
+		shunt-resistor-micro-ohms = <300>;
+		adi,volt-curr-sample-average = <128>;
+		adi,power-sample-average = <128>;
+	};
+
+	tmp421@4c {
+		compatible = "ti,tmp421";
+		reg = <0x4c>;
+	};
+
+	tmp421@4d {
+		compatible = "ti,tmp421";
+		reg = <0x4d>;
+	};
+
+	fan_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"presence-fan0","presence-fan1",
+		"presence-fan2","presence-fan3",
+		"power-fan0-good","power-fan1-good",
+		"power-fan2-good","power-fan3-good",
+		"","","","",
+		"","","","";
+	};
+};
+
+&i2c13 {
+	multi-master;
+	aspeed,hw-timeout-ms = <1000>;
+	status = "okay";
+
+	//USB Debug Connector
+	ipmb13@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpiov2_unbiased_default>;
+
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"FUSB302_SLED1_INT_N","FUSB302_SLED2_INT_N",
+			"SEL_SPI2_MUX","SPI2_MUX1",
+			"SPI2_MUX2","SPI2_MUX3",
+			"","FUSB302_SLED3_INT_N",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"BMC_SLED1_STCK","BMC_SLED2_STCK",
+			"BMC_SLED3_STCK","BMC_SLED4_STCK",
+			"BMC_SLED5_STCK","BMC_SLED6_STCK",
+			"","",
+	/*G0-G7*/	"BSM_FRU_WP","SWITCH_FRU_MUX","","FM_SOL_UART_CH_SEL",
+			"PWRGD_P1V05_VDDCORE","PWRGD_P1V5_VDD","","",
+	/*H0-H7*/	"presence-riser1","presence-riser2",
+			"presence-sled1","presence-sled2",
+			"presence-sled3","presence-sled4",
+			"presence-sled5","presence-sled6",
+	/*I0-I7*/	"REV_ID0","",
+			"REV_ID1","REV_ID2",
+			"","BSM_FLASH_WP_STATUS",
+			"BMC_TPM_PRES_N","FUSB302_SLED6_INT_N",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","BMC_RTC_INT","","",
+	/*M0-M7*/	"ALERT_SLED1_N","ALERT_SLED2_N",
+			"ALERT_SLED3_N","ALERT_SLED4_N",
+			"ALERT_SLED5_N","ALERT_SLED6_N",
+			"","USB_DEBUG_PWR_BTN_N",
+	/*N0-N7*/	"LED_POSTCODE_0","LED_POSTCODE_1",
+			"LED_POSTCODE_2","LED_POSTCODE_3",
+			"LED_POSTCODE_4","LED_POSTCODE_5",
+			"LED_POSTCODE_6","LED_POSTCODE_7",
+	/*O0-O7*/	"","","","",
+			"","BOARD_ID0","BOARD_ID1","BOARD_ID2",
+	/*P0-P7*/	"","","","","","","","BMC_HEARTBEAT",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","BAT_DETECT",
+			"BMC_BT_WP0_N","BMC_BT_WP1_N","","FUSB302_SLED4_INT_N",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"PWRGD_CNS_PSU","RST_BMC_MVL_N",
+			"P12V_AUX_ALERT1_N","PSU_PRSNT",
+			"USB2_SEL0_A","USB2_SEL1_A",
+			"USB2_SEL0_B","USB2_SEL1_B",
+	/*W0-W7*/	"RST_FRONT_IOEXP_N","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"BMC_SELF_HW_RST","BSM_PRSNT_N",
+			"BSM_FLASH_LATCH_N","FUSB302_SLED5_INT_N",
+			"","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+};
+
+&adc0 {
+	vref = <1800>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	vref = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&mdio0 {
+	status = "okay";
+	/* TODO: Add Marvell 88E6191X */
+};
+
+&mdio3 {
+	status = "okay";
+	/* TODO: Add Marvell 88X3310 */
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl_gpiov2_unbiased_default: gpiov2 {
+		pins = "AD14";
+		bias-disable;
+	};
+};
+
+&wdt1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
new file mode 100644
index 000000000000..14dd0ab64130
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
@@ -0,0 +1,1222 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2021 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/usb/pd.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Catalina BMC";
+	compatible = "facebook,catalina-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial0 = &uart1;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		i2c16 = &i2c1mux0ch0;
+		i2c17 = &i2c1mux0ch1;
+		i2c18 = &i2c1mux0ch2;
+		i2c19 = &i2c1mux0ch3;
+		i2c20 = &i2c1mux0ch4;
+		i2c21 = &i2c1mux0ch5;
+		i2c22 = &i2c1mux0ch6;
+		i2c23 = &i2c1mux0ch7;
+		i2c24 = &i2c0mux0ch0;
+		i2c25 = &i2c0mux0ch1;
+		i2c26 = &i2c0mux0ch2;
+		i2c27 = &i2c0mux0ch3;
+		i2c28 = &i2c0mux1ch0;
+		i2c29 = &i2c0mux1ch1;
+		i2c30 = &i2c0mux1ch2;
+		i2c31 = &i2c0mux1ch3;
+		i2c32 = &i2c0mux2ch0;
+		i2c33 = &i2c0mux2ch1;
+		i2c34 = &i2c0mux2ch2;
+		i2c35 = &i2c0mux2ch3;
+		i2c36 = &i2c0mux3ch0;
+		i2c37 = &i2c0mux3ch1;
+		i2c38 = &i2c0mux3ch2;
+		i2c39 = &i2c0mux3ch3;
+		i2c40 = &i2c0mux4ch0;
+		i2c41 = &i2c0mux4ch1;
+		i2c42 = &i2c0mux4ch2;
+		i2c43 = &i2c0mux4ch3;
+		i2c44 = &i2c0mux5ch0;
+		i2c45 = &i2c0mux5ch1;
+		i2c46 = &i2c0mux5ch2;
+		i2c47 = &i2c0mux5ch3;
+		i2c48 = &i2c5mux0ch0;
+		i2c49 = &i2c5mux0ch1;
+		i2c50 = &i2c5mux0ch2;
+		i2c51 = &i2c5mux0ch3;
+		i2c52 = &i2c5mux0ch4;
+		i2c53 = &i2c5mux0ch5;
+		i2c54 = &i2c5mux0ch6;
+		i2c55 = &i2c5mux0ch7;
+	};
+
+	chosen {
+		stdout-path = "serial4:57600n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			      <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			      <&adc1 2>;
+	};
+
+	spi1_gpio: spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bmc_heartbeat_amber";
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "fp_id_amber";
+			default-state = "off";
+			gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "bmc_ready_noled";
+			gpios = <&gpio0 ASPEED_GPIO(B, 3) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+		};
+
+		led-3 {
+			label = "bmc_ready_cpld_noled";
+			gpios = <&gpio0 ASPEED_GPIO(P, 5) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+		};
+	};
+
+	p1v8_bmc_aux: regulator-p1v8-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p1v8_bmc_aux";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	p2v5_bmc_aux: regulator-p2v5-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p2v5_bmc_aux";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ncsi3_default>;
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ncsi4_default>;
+	use-ncsi;
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	multi-master;
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c0mux0ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			mctp-controller;
+
+			// IOB0 NIC0 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+		i2c0mux0ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		i2c0mux0ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			mctp-controller;
+
+			// IOB0 NIC1 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+		i2c0mux0ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9546";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux1ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		i2c0mux1ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			// IO Mezz 0 IOEXP
+			io_expander7: gpio@20 {
+				compatible = "nxp,pca9535";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			// IO Mezz 0 FRU EEPROM
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+		i2c0mux1ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+		i2c0mux1ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@73 {
+		compatible = "nxp,pca9546";
+		reg = <0x73>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux2ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		i2c0mux2ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		i2c0mux2ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+		i2c0mux2ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9546";
+		reg = <0x75>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c0mux3ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			mctp-controller;
+
+			// IOB1 NIC0 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+		i2c0mux3ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		i2c0mux3ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			mctp-controller;
+
+			// IOB1 NIC1 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+		i2c0mux3ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@76 {
+		compatible = "nxp,pca9546";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux4ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		i2c0mux4ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			// IO Mezz 1 IOEXP
+			io_expander8: gpio@21 {
+				compatible = "nxp,pca9535";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			// IO Mezz 1 FRU EEPROM
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+		i2c0mux4ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+		i2c0mux4ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9546";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux5ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		i2c0mux5ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		i2c0mux5ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+		i2c0mux5ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		i2c1mux0ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			power-sensor@22 {
+				compatible = "mps,mp5990";
+				reg = <0x22>;
+			};
+		};
+		i2c1mux0ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+		i2c1mux0ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			fanctl2: fan-controller@1 {
+				compatible = "nuvoton,nct7363";
+				reg = <0x01>;
+				#pwm-cells = <2>;
+
+				fan-9 {
+					pwms = <&fanctl2 0 40000>;
+					tach-ch = /bits/ 8 <0x09>;
+				};
+				fan-11 {
+					pwms = <&fanctl2 0 40000>;
+					tach-ch = /bits/ 8 <0x0b>;
+				};
+				fan-10 {
+					pwms = <&fanctl2 4 40000>;
+					tach-ch = /bits/ 8 <0x0a>;
+				};
+				fan-13 {
+					pwms = <&fanctl2 4 40000>;
+					tach-ch = /bits/ 8 <0x0d>;
+				};
+				fan-15 {
+					pwms = <&fanctl2 6 40000>;
+					tach-ch = /bits/ 8 <0x0f>;
+				};
+				fan-1 {
+					pwms = <&fanctl2 6 40000>;
+					tach-ch = /bits/ 8 <0x01>;
+				};
+				fan-0 {
+					pwms = <&fanctl2 10 40000>;
+					tach-ch = /bits/ 8 <0x00>;
+				};
+				fan-3 {
+					pwms = <&fanctl2 10 40000>;
+					tach-ch = /bits/ 8 <0x03>;
+				};
+			};
+			fanctl3: fan-controller@2 {
+				compatible = "nuvoton,nct7363";
+				reg = <0x02>;
+				#pwm-cells = <2>;
+
+				fan-9 {
+					pwms = <&fanctl3 0 40000>;
+					tach-ch = /bits/ 8 <0x09>;
+				};
+				fan-11 {
+					pwms = <&fanctl3 0 40000>;
+					tach-ch = /bits/ 8 <0x0b>;
+				};
+				fan-10 {
+					pwms = <&fanctl3 4 40000>;
+					tach-ch = /bits/ 8 <0x0a>;
+				};
+				fan-13 {
+					pwms = <&fanctl3 4 40000>;
+					tach-ch = /bits/ 8 <0x0d>;
+				};
+				fan-15 {
+					pwms = <&fanctl3 6 40000>;
+					tach-ch = /bits/ 8 <0x0f>;
+				};
+				fan-1 {
+					pwms = <&fanctl3 6 40000>;
+					tach-ch = /bits/ 8 <0x01>;
+				};
+				fan-0 {
+					pwms = <&fanctl3 10 40000>;
+					tach-ch = /bits/ 8 <0x00>;
+				};
+				fan-3 {
+					pwms = <&fanctl3 10 40000>;
+					tach-ch = /bits/ 8 <0x03>;
+				};
+			};
+			fanctl0: fan-controller@21 {
+				compatible = "maxim,max31790";
+				reg = <0x21>;
+			};
+			fanctl1: fan-controller@27 {
+				compatible = "maxim,max31790";
+				reg = <0x27>;
+			};
+		};
+		i2c1mux0ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+		i2c1mux0ch4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+
+			power-monitor@13 {
+				compatible = "infineon,xdp710";
+				reg = <0x13>;
+			};
+			power-monitor@1c {
+				compatible = "infineon,xdp710";
+				reg = <0x1c>;
+			};
+			power-monitor@42 {
+				compatible = "lltc,ltc4287";
+				reg = <0x42>;
+				shunt-resistor-micro-ohms = <100>;
+			};
+			power-monitor@43 {
+				compatible = "lltc,ltc4287";
+				reg = <0x43>;
+				shunt-resistor-micro-ohms = <100>;
+			};
+		};
+		i2c1mux0ch5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+
+			// PDB FRU EEPROM
+			eeprom@54 {
+				compatible = "atmel,24c64";
+				reg = <0x54>;
+			};
+
+			// PDB TEMP SENSOR
+			temperature-sensor@4f {
+				compatible = "ti,tmp75";
+				reg = <0x4f>;
+			};
+		};
+		i2c1mux0ch6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+
+			// PDB IOEXP
+			io_expander5: gpio@27 {
+				compatible = "nxp,pca9554";
+				reg = <0x27>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			// OSFP IOEXP
+			io_expander6: gpio@25 {
+				compatible = "nxp,pca9555";
+				reg = <0x25>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			// OSFP FRU EEPROM
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+		i2c1mux0ch7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+
+			// FIO FRU EEPROM
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+
+			// FIO TEMP SENSOR
+			temperature-sensor@4b {
+				compatible = "ti,tmp75";
+				reg = <0x4b>;
+			};
+
+			// FIO REMOTE TEMP SENSOR
+			temperature-sensor@4f {
+				compatible = "ti,tmp75";
+				reg = <0x4f>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	// Module 0 IOEXP
+	io_expander0: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// Module 1 IOEXP
+	io_expander1: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// HMC IOEXP
+	io_expander2: gpio@27 {
+		compatible = "nxp,pca9555";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// Module 0 EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	// Module 1 EEPROM
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c5mux0ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		i2c5mux0ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		i2c5mux0ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+		i2c5mux0ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+		i2c5mux0ch4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+		i2c5mux0ch5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+		i2c5mux0ch6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+			// HDD FRU EEPROM
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+		};
+		i2c5mux0ch7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	// BMC IOEXP on Module 0
+	io_expander3: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	rtc@6f {
+		compatible = "nuvoton,nct3018y";
+		reg = <0x6f>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+
+	// SCM CPLD IOEXP
+	io_expander4: gpio@4f {
+		compatible = "nxp,pca9555";
+		reg = <0x4f>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// SCM TEMP SENSOR
+	temperature-sensor@4b {
+		compatible = "ti,tmp75";
+		reg = <0x4b>;
+	};
+
+	// SCM FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	// BSM FRU EEPROM
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+	multi-master;
+	mctp-controller;
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	// OCP NIC0 TEMP
+	temperature-sensor@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+
+	// OCP NIC0 FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	ssif-bmc@10 {
+		compatible = "ssif-bmc";
+		reg = <0x10>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+	multi-master;
+
+	// Module 1 FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	// Secondary CBC FRU EEPROM
+	eeprom@54 {
+		compatible = "atmel,24c02";
+		reg = <0x54>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+	multi-master;
+
+	// Module 0 FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	// Primary CBC FRU EEPROM
+	eeprom@54 {
+		compatible = "atmel,24c02";
+		reg = <0x54>;
+	};
+
+	// HMC FRU EEPROM
+	eeprom@57 {
+		compatible = "atmel,24c02";
+		reg = <0x57>;
+	};
+};
+
+&i2c14 {
+	status = "okay";
+
+	// PDB CPLD IOEXP 0x10
+	io_expander9: gpio@10 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x10>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// PDB CPLD IOEXP 0x11
+	io_expander10: gpio@11 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x11>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// PDB CPLD IOEXP 0x12
+	io_expander11: gpio@12 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x12>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// PDB CPLD IOEXP 0x13
+	io_expander12: gpio@13 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x13>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// PDB CPLD IOEXP 0x14
+	io_expander13: gpio@14 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x14>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// PDB CPLD IOEXP 0x15
+	io_expander14: gpio@15 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x15>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&i2c15 {
+	status = "okay";
+	multi-master;
+	mctp-controller;
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	// OCP NIC1 TEMP
+	temperature-sensor@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+
+	// OCP NIC1 FRU EEPROM
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+};
+
+&adc0 {
+	vref-supply = <&p1v8_bmc_aux>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	vref-supply = <&p2v5_bmc_aux>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc10_default>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+};
+
+&pinctrl {
+	pinctrl_ncsi3_default: ncsi3_default {
+		function = "RMII3";
+		groups = "NCSI3";
+	};
+
+	pinctrl_ncsi4_default: ncsi4_default {
+		function = "RMII4";
+		groups = "NCSI4";
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"BATTERY_DETECT","PRSNT1_HPM_SCM_N",
+			"BMC_I2C1_FPGA_ALERT_L","BMC_READY",
+			"IOEXP_INT_L","FM_ID_LED",
+			"","",
+	/*C0-C7*/	"","","","",
+			"PMBUS_REQ_N","PSU_FW_UPDATE_REQ_N",
+			"","BMC_I2C_SSIF_ALERT_L",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","",
+			"FM_DEBUG_PORT_PRSNT_N","FM_BMC_DBP_PRESENT_N",
+	/*H0-H7*/	"PWR_BRAKE_L","RUN_POWER_EN",
+			"SHDN_FORCE_L","SHDN_REQ_L",
+			"","","","",
+	/*I0-I7*/	"","","","",
+			"","FLASH_WP_STATUS",
+			"FM_PDB_HEALTH_N","RUN_POWER_PG",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"PCIE_EP_RST_EN","BMC_FRU_WP",
+			"SCM_HPM_STBY_RST_N","SCM_HPM_STBY_EN",
+			"STBY_POWER_PG_3V3","TH500_SHDN_OK_L","","",
+	/*N0-N7*/	"LED_POSTCODE_0","LED_POSTCODE_1",
+			"LED_POSTCODE_2","LED_POSTCODE_3",
+			"LED_POSTCODE_4","LED_POSTCODE_5",
+			"LED_POSTCODE_6","LED_POSTCODE_7",
+	/*O0-O7*/	"HMC_I2C3_FPGA_ALERT_L","FPGA_READY_HMC",
+			"CHASSIS_AC_LOSS_L","BSM_PRSNT_R_N",
+			"PSU_SMB_ALERT_L","FM_TPM_PRSNT_0_N",
+			"","USBDBG_IPMI_EN_L",
+	/*P0-P7*/	"PWR_BTN_BMC_N","IPEX_CABLE_PRSNT_L",
+			"ID_RST_BTN_BMC_N","RST_BMC_RSTBTN_OUT_N",
+			"host0-ready","BMC_READY_CPLD","","BMC_HEARTBEAT_N",
+	/*Q0-Q7*/	"IRQ_PCH_TPM_SPI_N","USB_OC0_REAR_R_N",
+			"UART_MUX_SEL","I2C_MUX_RESET_L",
+			"RSVD_NV_PLT_DETECT","SPI_TPM_INT_L",
+			"CPU_JTAG_MUX_SELECT","THERM_BB_OVERT_L",
+	/*R0-R7*/	"THERM_BB_WARN_L","SPI_BMC_FPGA_INT_L",
+			"CPU_BOOT_DONE","PMBUS_GNT_L",
+			"CHASSIS_PWR_BRK_L","PCIE_WAKE_L",
+			"PDB_THERM_OVERT_L","HMC_I2C2_FPGA_ALERT_L",
+	/*S0-S7*/	"","","SYS_BMC_PWRBTN_R_N","FM_TPM_PRSNT_1_N",
+			"FM_BMC_DEBUG_SW_N","UID_LED_N",
+			"SYS_FAULT_LED_N","RUN_POWER_FAULT_L",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"L2_RST_REQ_OUT_L","L0L1_RST_REQ_OUT_L",
+			"BMC_ID_BEEP_SEL","BMC_I2C0_FPGA_ALERT_L",
+			"SMB_BMC_TMP_ALERT","PWR_LED_N",
+			"SYS_RST_OUT_L","IRQ_TPM_SPI_N",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","RST_BMC_SELF_HW",
+			"FM_FLASH_LATCH_N","BMC_EMMC_RST_N",
+			"","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+};
+
+&io_expander0 {
+	gpio-line-names =
+		"FPGA_THERM_OVERT_L","FPGA_READY_BMC",
+		"HMC_BMC_DETECT","HMC_PGOOD",
+		"","BMC_SELF_PWR_CYCLE",
+		"FPGA_EROT_FATAL_ERROR_L","WP_HW_EXT_CTRL_L",
+		"EROT_FPGA_RST_L","FPGA_EROT_RECOVERY_L",
+		"BMC_EROT_FPGA_SPI_MUX_SEL","USB2_HUB_RESET_L",
+		"NCSI_CS1_SEL","SGPIO_EN_L",
+		"B2B_IOEXP_INT_L","I2C_BUS_MUX_RESET_L";
+};
+
+&io_expander1 {
+	gpio-line-names =
+		"SEC_FPGA_THERM_OVERT_L","SEC_FPGA_READY_BMC",
+		"","",
+		"","",
+		"SEC_FPGA_EROT_FATAL_ERROR_L","SEC_WP_HW_EXT_CTRL_L",
+		"SEC_EROT_FPGA_RST_L","SEC_FPGA_EROT_RECOVERY_L",
+		"SEC_BMC_EROT_FPGA_SPI_MUX_SEL","",
+		"","",
+		"","SEC_I2C_BUS_MUX_RESET_L";
+};
+
+&io_expander2 {
+	gpio-line-names =
+		"HMC_PRSNT_L","HMC_READY",
+		"HMC_EROT_FATAL_ERROR_L","I2C_MUX_SEL",
+		"HMC_EROT_SPI_MUX_SEL","HMC_EROT_RECOVERY_L",
+		"HMC_EROT_RST_L","GLOBAL_WP_HMC",
+		"FPGA_RST_L","USB2_HUB_RST",
+		"CPU_UART_MUX_SEL","",
+		"","","","";
+};
+
+&io_expander3 {
+	gpio-line-names =
+		"RTC_MUX_SEL","PCI_MUX_SEL","TPM_MUX_SEL","FAN_MUX-SEL",
+		"SGMII_MUX_SEL","DP_MUX_SEL","UPHY3_USB_SEL","NCSI_MUX_SEL",
+		"BMC_PHY_RST","RTC_CLR_L","BMC_12V_CTRL","PS_RUN_IO0_PG",
+		"","","","";
+};
+
+&io_expander4 {
+	gpio-line-names =
+		"stby_power_en_cpld","stby_power_gd_cpld","","",
+		"","","","",
+		"","","","",
+		"","","","";
+};
+
+&io_expander5 {
+	gpio-line-names =
+		"JTAG_MUX_SEL","IOX_BMC_RESET","","",
+		"","","","";
+};
+
+&io_expander6 {
+	gpio-line-names =
+		"OSFP_PHASE_ID0","OSFP_PHASE_ID1",
+		"OSFP_PHASE_ID2","OSFP_PHASE_ID3",
+		"","","","",
+		"OSFP_BOARD_ID0","OSFP_BOARD_ID1",
+		"OSFP_BOARD_ID2","PWRGD_P3V3_N1",
+		"PWRGD_P3V3_N2","","","";
+};
+
+&io_expander7 {
+	gpio-line-names =
+		"RST_CX7_0","RST_CX7_1",
+		"CX0_SSD0_PRSNT_L","CX1_SSD1_PRSNT_L",
+		"CX_BOOT_CMPLT_CX0","CX_BOOT_CMPLT_CX1",
+		"CX_TWARN_CX0_L","CX_TWARN_CX1_L",
+		"CX_OVT_SHDN_CX0","CX_OVT_SHDN_CX1",
+		"FNP_L_CX0","FNP_L_CX1",
+		"","MCU_GPIO","MCU_RST_N","MCU_RECOVERY_N";
+};
+
+&io_expander8 {
+	gpio-line-names =
+		"SEC_RST_CX7_0","SEC_RST_CX7_1",
+		"SEC_CX0_SSD0_PRSNT_L","SEC_CX1_SSD1_PRSNT_L",
+		"SEC_CX_BOOT_CMPLT_CX0","SEC_CX_BOOT_CMPLT_CX1",
+		"SEC_CX_TWARN_CX0_L","SEC_CX_TWARN_CX1_L",
+		"SEC_CX_OVT_SHDN_CX0","SEC_CX_OVT_SHDN_CX1",
+		"SEC_FNP_L_CX0","SEC_FNP_L_CX1",
+		"","SEC_MCU_GPIO","SEC_MCU_RST_N","SEC_MCU_RECOVERY_N";
+};
+
+&io_expander9 {
+	gpio-line-names =
+		"LEAK3_DETECT_R","LEAK1_DETECT_R",
+		"LEAK2_DETECT_R","LEAK0_DETECT_R",
+		"CHASSIS3_LEAK_Q_N_PLD","CHASSIS1_LEAK_Q_N_PLD",
+		"CHASSIS2_LEAK_Q_N_PLD","CHASSIS0_LEAK_Q_N_PLD",
+		"P12V_AUX_FAN_ALERT_PLD_N","P12V_AUX_FAN_OC_PLD_N",
+		"P12V_AUX_FAN_FAULT_PLD_N","LEAK_DETECT_RMC_N_R",
+		"RSVD_RMC_GPIO3_R","SMB_RJ45_FIO_TMP_ALERT",
+		"","";
+};
+
+&io_expander10 {
+	gpio-line-names =
+		"FM_P12V_NIC1_FLTB_R_N","FM_P3V3_NIC1_FAULT_R_N",
+		"OCP_V3_2_PWRBRK_FROM_HOST_ISO_PLD_N",
+		"P12V_AUX_NIC1_SENSE_ALERT_R_N",
+		"FM_P12V_NIC0_FLTB_R_N","FM_P3V3_NIC0_FAULT_R_N",
+		"OCP_SFF_PWRBRK_FROM_HOST_ISO_PLD_N",
+		"P12V_AUX_NIC0_SENSE_ALERT_R_N",
+		"P12V_AUX_PSU_SMB_ALERT_R_L","P12V_SCM_SENSE_ALERT_R_N",
+		"NODEB_PSU_SMB_ALERT_R_L","NODEA_PSU_SMB_ALERT_R_L",
+		"P52V_SENSE_ALERT_PLD_N","P48V_HS2_FAULT_N_PLD",
+		"P48V_HS1_FAULT_N_PLD","";
+};
+
+&io_expander11 {
+	gpio-line-names =
+		"FAN_7_PRESENT_N","FAN_6_PRESENT_N",
+		"FAN_5_PRESENT_N","FAN_4_PRESENT_N",
+		"FAN_3_PRESENT_N","FAN_2_PRESENT_N",
+		"FAN_1_PRESENT_N","FAN_0_PRESENT_N",
+		"PRSNT_CHASSIS3_LEAK_CABLE_R_N","PRSNT_CHASSIS1_LEAK_CABLE_R_N",
+		"PRSNT_CHASSIS2_LEAK_CABLE_R_N","PRSNT_CHASSIS0_LEAK_CABLE_R_N",
+		"PRSNT_RJ45_FIO_N_R","PRSNT_HDDBD_POWER_CABLE_N",
+		"PRSNT_OSFP_POWER_CABLE_N","";
+};
+
+&io_expander12 {
+	gpio-line-names =
+		"RST_OCP_V3_1_R_N","NIC0_PERST_N",
+		"OCP_SFF_PERST_FROM_HOST_ISO_PLD_N","OCP_SFF_MAIN_PWR_EN",
+		"FM_OCP_SFF_PWR_GOOD_PLD","OCP_SFF_AUX_PWR_PLD_EN_R",
+		"HP_LVC3_OCP_V3_1_PWRGD_PLD","HP_OCP_V3_1_HSC_PWRGD_PLD_R",
+		"RST_OCP_V3_2_R_N","NIC1_PERST_N",
+		"OCP_V3_2_PERST_FROM_HOST_ISO_PLD_N","OCP_V3_2_MAIN_PWR_EN",
+		"FM_OCP_V3_2_PWR_GOOD_PLD","OCP_V3_2_AUX_PWR_PLD_EN_R",
+		"HP_LVC3_OCP_V3_2_PWRGD_PLD","HP_OCP_V3_2_HSC_PWRGD_PLD_R";
+};
+
+&io_expander13 {
+	gpio-line-names =
+		"NODEA_NODEB_PWOK_PLD_ISO_R","PWR_EN_NICS",
+		"PWRGD_P12V_AUX_FAN_PLD","P12V_AUX_FAN_EN_PLD",
+		"PWRGD_P3V3_AUX_PLD","PWRGD_P12V_AUX_PLD_ISO_R",
+		"FM_MAIN_PWREN_FROM_RMC_R","FM_MAIN_PWREN_RMC_EN_ISO_R",
+		"PWRGD_RMC_R","PWRGD_P12V_AUX_FAN_PLD",
+		"P12V_AUX_FAN_EN_PLD","FM_SYS_THROTTLE_N",
+		"HP_LVC3_OCP_V3_2_PRSNT2_PLD_N","HP_LVC3_OCP_V3_1_PRSNT2_PLD_N",
+		"","";
+};
+
+&io_expander14 {
+	gpio-line-names =
+		"","","","","","","","",
+		"FM_BOARD_BMC_SKU_ID3","FM_BOARD_BMC_SKU_ID2",
+		"FM_BOARD_BMC_SKU_ID1","FM_BOARD_BMC_SKU_ID0",
+		"FAB_BMC_REV_ID2","FAB_BMC_REV_ID1",
+		"FAB_BMC_REV_ID0","";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts
new file mode 100644
index 000000000000..450446913e36
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts
@@ -0,0 +1,1290 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2021 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/usb/pd.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Clemente BMC";
+	compatible = "facebook,clemente-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial0 = &uart1;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		i2c16 = &i2c1mux0ch0;
+		i2c17 = &i2c1mux0ch1;
+		i2c18 = &i2c1mux0ch2;
+		i2c19 = &i2c1mux0ch3;
+		i2c20 = &i2c1mux0ch4;
+		i2c21 = &i2c1mux0ch5;
+		i2c22 = &i2c1mux0ch6;
+		i2c23 = &i2c1mux0ch7;
+		i2c24 = &i2c0mux0ch0;
+		i2c25 = &i2c0mux0ch1;
+		i2c26 = &i2c0mux0ch2;
+		i2c27 = &i2c0mux0ch3;
+		i2c28 = &i2c0mux1ch0;
+		i2c29 = &i2c0mux1ch1;
+		i2c30 = &i2c0mux1ch2;
+		i2c31 = &i2c0mux1ch3;
+		i2c32 = &i2c0mux2ch0;
+		i2c33 = &i2c0mux2ch1;
+		i2c34 = &i2c0mux2ch2;
+		i2c35 = &i2c0mux2ch3;
+		i2c36 = &i2c0mux3ch0;
+		i2c37 = &i2c0mux3ch1;
+		i2c38 = &i2c0mux3ch2;
+		i2c39 = &i2c0mux3ch3;
+		i2c40 = &i2c0mux4ch0;
+		i2c41 = &i2c0mux4ch1;
+		i2c42 = &i2c0mux4ch2;
+		i2c43 = &i2c0mux4ch3;
+		i2c44 = &i2c0mux5ch0;
+		i2c45 = &i2c0mux5ch1;
+		i2c46 = &i2c0mux5ch2;
+		i2c47 = &i2c0mux5ch3;
+		i2c48 = &i2c0mux0ch1mux0ch0;
+		i2c49 = &i2c0mux0ch1mux0ch1;
+		i2c50 = &i2c0mux0ch1mux0ch2;
+		i2c51 = &i2c0mux0ch1mux0ch3;
+		i2c52 = &i2c0mux3ch1mux0ch0;
+		i2c53 = &i2c0mux3ch1mux0ch1;
+		i2c54 = &i2c0mux3ch1mux0ch2;
+		i2c55 = &i2c0mux3ch1mux0ch3;
+	};
+
+	chosen {
+		stdout-path = "serial4:57600n8";
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			      <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			      <&adc1 2>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bmc_heartbeat_amber";
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "fp_id_amber";
+			default-state = "off";
+			gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "bmc_ready_noled";
+			gpios = <&gpio0 ASPEED_GPIO(B, 3) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+		};
+
+		led-3 {
+			label = "bmc_ready_cpld_noled";
+			gpios = <&gpio0 ASPEED_GPIO(P, 5) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+		};
+
+		led-hdd {
+			label = "hdd_led";
+			gpios = <&io_expander13 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	p1v8_bmc_aux: regulator-p1v8-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p1v8_bmc_aux";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	p2v5_bmc_aux: regulator-p2v5-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p2v5_bmc_aux";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xbb000000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>;
+		};
+	};
+
+	spi1_gpio: spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+};
+
+&adc0 {
+	vref-supply = <&p1v8_bmc_aux>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	vref-supply = <&p2v5_bmc_aux>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc10_default>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"BATTERY_DETECT","PRSNT1_HPM_SCM_N",
+			"BMC_I2C1_FPGA_ALERT_L","BMC_READY",
+			"IOEXP_INT_L","FM_ID_LED",
+			"","",
+	/*C0-C7*/	"BMC_GPIOC0","","","",
+			"PMBUS_REQ_N","PSU_FW_UPDATE_REQ_N",
+			"","BMC_I2C_SSIF_ALERT_L",
+	/*D0-D7*/	"","","","","BMC_GPIOD4","","","",
+	/*E0-E7*/	"BMC_GPIOE0","BMC_GPIOE1","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","",
+			"FM_DEBUG_PORT_PRSNT_N","FM_BMC_DBP_PRESENT_N",
+	/*H0-H7*/	"PWR_BRAKE_L","RUN_POWER_EN",
+			"SHDN_FORCE_L","SHDN_REQ_L",
+			"","","","",
+	/*I0-I7*/	"","","","",
+			"","FLASH_WP_STATUS",
+			"FM_PDB_HEALTH_N","RUN_POWER_PG",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"PCIE_EP_RST_EN","BMC_FRU_WP",
+			"SCM_HPM_STBY_RST_N","SCM_HPM_STBY_EN",
+			"STBY_POWER_PG_3V3","TH500_SHDN_OK_L","","",
+	/*N0-N7*/	"LED_POSTCODE_0","LED_POSTCODE_1",
+			"LED_POSTCODE_2","LED_POSTCODE_3",
+			"LED_POSTCODE_4","LED_POSTCODE_5",
+			"LED_POSTCODE_6","LED_POSTCODE_7",
+	/*O0-O7*/	"HMC_I2C3_FPGA_ALERT_L","FPGA_READY_HMC",
+			"CHASSIS_AC_LOSS_L","BSM_PRSNT_R_N",
+			"PSU_SMB_ALERT_L","FM_TPM_PRSNT_0_N",
+			"","USBDBG_IPMI_EN_L",
+	/*P0-P7*/	"PWR_BTN_BMC_N","IPEX_CABLE_PRSNT_L",
+			"ID_RST_BTN_BMC_N","RST_BMC_RSTBTN_OUT_N",
+			"host0-ready","BMC_READY_CPLD","BMC_GPIOP6","BMC_HEARTBEAT_N",
+	/*Q0-Q7*/	"IRQ_PCH_TPM_SPI_N","USB_OC0_REAR_R_N",
+			"UART_MUX_SEL","I2C_MUX_RESET_L",
+			"RSVD_NV_PLT_DETECT","SPI_TPM_INT_L",
+			"CPU_JTAG_MUX_SELECT","THERM_BB_OVERT_L",
+	/*R0-R7*/	"THERM_BB_WARN_L","SPI_BMC_FPGA_INT_L",
+			"CPU_BOOT_DONE","PMBUS_GNT_L",
+			"CHASSIS_PWR_BRK_L","PCIE_WAKE_L",
+			"PDB_THERM_OVERT_L","HMC_I2C2_FPGA_ALERT_L",
+	/*S0-S7*/	"","","SYS_BMC_PWRBTN_R_N","FM_TPM_PRSNT_1_N",
+			"FM_BMC_DEBUG_SW_N","UID_LED_N",
+			"SYS_FAULT_LED_N","RUN_POWER_FAULT_L",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"L2_RST_REQ_OUT_L","L0L1_RST_REQ_OUT_L",
+			"BMC_ID_BEEP_SEL","BMC_I2C0_FPGA_ALERT_L",
+			"SMB_BMC_TMP_ALERT","PWR_LED_N",
+			"SYS_RST_OUT_L","IRQ_TPM_SPI_N",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","RST_BMC_SELF_HW",
+			"FM_FLASH_LATCH_N","BMC_EMMC_RST_N",
+			"BMC_GPIOY4","BMC_GPIOY5","","",
+	/*Z0-Z7*/	"","","","","","","BMC_GPIOZ6","BMC_GPIOZ7";
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/	"","","","","","","","",
+	/*18B0-18B3*/	"","","","",
+	/*18B4-18B7*/	"FM_BOARD_BMC_REV_ID0","FM_BOARD_BMC_REV_ID1","FM_BOARD_BMC_REV_ID2","",
+	/*18C0-18C7*/	"","","PI_BMC_BIOS_ROM_IRQ0_N","","","","","",
+	/*18D0-18D7*/	"","","","","","","","",
+	/*18E0-18E3*/	"","","","AC_PWR_BMC_BTN_N","","","","";
+};
+
+&i2c0 {
+	status = "okay";
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux0ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c0mux0ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			// HDD FRU EEPROM
+			eeprom@56 {
+				compatible = "atmel,24c128";
+				reg = <0x56>;
+			};
+
+			// E1.S Backplane
+			i2c0mux0ch1mux0: i2c-mux@74 {
+				compatible = "nxp,pca9546";
+				reg = <0x74>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				i2c0mux0ch1mux0ch0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				i2c0mux0ch1mux0ch1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				i2c0mux0ch1mux0ch2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				i2c0mux0ch1mux0ch3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		};
+
+		i2c0mux0ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c0mux0ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9546";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux1ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c0mux1ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			// IO Mezz 0 IOEXP
+			io_expander7: gpio@20 {
+				compatible = "nxp,pca9535";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names =
+					"RST_CX7_0",
+					"RST_CX7_1",
+					"CX0_SSD0_PRSNT_L",
+					"CX1_SSD1_PRSNT_L",
+					"CX_BOOT_CMPLT_CX0",
+					"CX_BOOT_CMPLT_CX1",
+					"CX_TWARN_CX0_L",
+					"CX_TWARN_CX1_L",
+					"CX_OVT_SHDN_CX0",
+					"CX_OVT_SHDN_CX1",
+					"FNP_L_CX0",
+					"FNP_L_CX1",
+					"",
+					"MCU_GPIO",
+					"MCU_RST_N",
+					"MCU_RECOVERY_N";
+			};
+
+			// IO Mezz 0 FRU EEPROM
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			// OSFP 0 FRU EEPROM
+			eeprom@52 {
+				compatible = "atmel,24c128";
+				reg = <0x52>;
+			};
+		};
+
+		i2c0mux1ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c0mux1ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@73 {
+		compatible = "nxp,pca9546";
+		reg = <0x73>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux2ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			// IOB0 NIC0 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+
+		i2c0mux2ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c0mux2ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c0mux2ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			// IOB0 NIC1 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+	};
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9546";
+		reg = <0x75>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux3ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c0mux3ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			// E1.S Backplane HDD FRU EEPROM
+			eeprom@56 {
+				compatible = "atmel,24c128";
+				reg = <0x56>;
+			};
+
+			// E1.S Backplane MUX
+			i2c0mux3ch1mux0: i2c-mux@74 {
+				compatible = "nxp,pca9546";
+				reg = <0x74>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				i2c0mux3ch1mux0ch0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				i2c0mux3ch1mux0ch1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				i2c0mux3ch1mux0ch2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				i2c0mux3ch1mux0ch3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		};
+
+		i2c0mux3ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c0mux3ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@76 {
+		compatible = "nxp,pca9546";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux4ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c0mux4ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			// IO Mezz 1 IOEXP
+			io_expander8: gpio@21 {
+				compatible = "nxp,pca9535";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names =
+					"SEC_RST_CX7_0",
+					"SEC_RST_CX7_1",
+					"SEC_CX0_SSD0_PRSNT_L",
+					"SEC_CX1_SSD1_PRSNT_L",
+					"SEC_CX_BOOT_CMPLT_CX0",
+					"SEC_CX_BOOT_CMPLT_CX1",
+					"SEC_CX_TWARN_CX0_L",
+					"SEC_CX_TWARN_CX1_L",
+					"SEC_CX_OVT_SHDN_CX0",
+					"SEC_CX_OVT_SHDN_CX1",
+					"SEC_FNP_L_CX0",
+					"SEC_FNP_L_CX1",
+					"",
+					"SEC_MCU_GPIO",
+					"SEC_MCU_RST_N",
+					"SEC_MCU_RECOVERY_N";
+			};
+
+			// IO Mezz 1 FRU EEPROM
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			// OSFP 1 FRU EEPROM
+			eeprom@52 {
+				compatible = "atmel,24c128";
+				reg = <0x52>;
+			};
+		};
+
+		i2c0mux4ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c0mux4ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9546";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux5ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			// IOB1 NIC0 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+
+		i2c0mux5ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c0mux5ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c0mux5ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			// IOB1 NIC1 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	// PDB
+	power-monitor@12 {
+		compatible = "ti,lm5066i";
+		reg = <0x12>;
+		shunt-resistor-micro-ohms = <183>;
+	};
+
+	// PDB
+	power-monitor@14 {
+		compatible = "ti,lm5066i";
+		reg = <0x14>;
+		shunt-resistor-micro-ohms = <183>;
+	};
+
+	// Module 0
+	fanctl0: fan-controller@20{
+		compatible = "maxim,max31790";
+		reg = <0x20>;
+	};
+
+	// Module 0
+	fanctl1: fan-controller@23{
+		compatible = "maxim,max31790";
+		reg = <0x23>;
+	};
+
+	// Module 1
+	fanctl2: fan-controller@2c{
+		compatible = "maxim,max31790";
+		reg = <0x2c>;
+	};
+
+	// Module 1
+	fanctl3: fan-controller@2f{
+		compatible = "maxim,max31790";
+		reg = <0x2f>;
+	};
+
+	// Module 0 Leak Sensor
+	adc@34 {
+		compatible = "maxim,max1363";
+		reg = <0x34>;
+	};
+
+	// Module 1 Leak Sensor
+	adc@35 {
+		compatible = "maxim,max1363";
+		reg = <0x35>;
+	};
+
+	// PDB TEMP SENSOR
+	temperature-sensor@4e {
+		compatible = "ti,tmp1075";
+		reg = <0x4e>;
+	};
+
+	// PDB FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+	};
+
+	// PDB
+	vrm@60 {
+		compatible = "renesas,raa228004";
+		reg = <0x60>;
+	};
+
+	// PDB
+	vrm@61 {
+		compatible = "renesas,raa228004";
+		reg = <0x61>;
+	};
+
+	// Interposer
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		i2c1mux0ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+
+		i2c1mux0ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+
+		i2c1mux0ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+		};
+
+		i2c1mux0ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+
+		i2c1mux0ch4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+
+		i2c1mux0ch5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+
+			// Interposer TEMP SENSOR
+			temperature-sensor@4f {
+				compatible = "ti,tmp75";
+				reg = <0x4f>;
+			};
+
+			// Interposer FRU EEPROM
+			eeprom@54 {
+				compatible = "atmel,24c64";
+				reg = <0x54>;
+			};
+		};
+
+		i2c1mux0ch6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+
+			// Interposer IOEXP
+			io_expander5: gpio@27 {
+				compatible = "nxp,pca9554";
+				reg = <0x27>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names =
+					"JTAG_MUX_SEL",
+					"IOX_BMC_RESET",
+					"RTC_CLR_L",
+					"RTC_U77_ALRT_N",
+					"",
+					"PSU_ALERT_N",
+					"",
+					"RST_P12V_STBY_N";
+			};
+		};
+
+		i2c1mux0ch7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+
+			// FIO TEMP SENSOR
+			temperature-sensor@4b {
+				compatible = "ti,tmp75";
+				reg = <0x4b>;
+			};
+
+			// FIO FRU EEPROM
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	// Module 0, Expander @0x20
+	io_expander0: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"FPGA_THERM_OVERT_L-I",
+			"FPGA_READY_BMC-I",
+			"HMC_BMC_DETECT-O",
+			"HMC_PGOOD-O",
+			"",
+			"BMC_STBY_CYCLE-O",
+			"FPGA_EROT_FATAL_ERROR_L-I",
+			"WP_HW_EXT_CTRL_L-O",
+			"EROT_FPGA_RST_L-O",
+			"FPGA_EROT_RECOVERY_L-O",
+			"BMC_EROT_FPGA_SPI_MUX_SEL-O",
+			"USB2_HUB_RST_L-O",
+			"",
+			"SGPIO_EN_L-O",
+			"B2B_IOEXP_INT_L-I",
+			"I2C_BUS_MUX_RESET_L-O";
+	};
+
+	// Module 1, Expander @0x21
+	io_expander1: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"SEC_FPGA_THERM_OVERT_L",
+			"SEC_FPGA_READY_BMC",
+			"SEC_HMC_BMC_DETECT",
+			"SEC_HMC_PGOOD",
+			"",
+			"SEC_BMC_SELF_POWER_CYCLE",
+			"SEC_SEC_FPGA_EROT_FATAL_ERROR_L",
+			"SEC_WP_HW_EXT_CTRL_L",
+			"SEC_EROT_FPGA_RST_L",
+			"SEC_FPGA_EROT_RECOVERY_L",
+			"SEC_BMC_EROT_FPGA_SPI_MUX_SEL",
+			"SEC_USB2_HUB_RST_L",
+			"",
+			"SEC_SGPIO_EN_L",
+			"SEC_IOB_IOEXP_INT_L",
+			"SEC_I2C_BUS_MUX_RESET_L";
+	};
+
+	// HMC Expander @0x27
+	io_expander2: gpio@27 {
+		compatible = "nxp,pca9555";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"HMC_PRSNT_L-I",
+			"HMC_READY-I",
+			"HMC_EROT_FATAL_ERROR_L-I",
+			"I2C_MUX_SEL-O",
+			"HMC_EROT_SPI_MUX_SEL-O",
+			"HMC_EROT_RECOVERY_L-O",
+			"HMC_EROT_RST_L-O",
+			"GLOBAL_WP_HMC-O",
+			"FPGA_RST_L-O",
+			"USB2_HUB_RST-O",
+			"CPU_UART_MUX_SEL-O",
+			"",
+			"",
+			"",
+			"",
+			"";
+	};
+
+	// Module 0 Aux EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	// Module 1 Aux EEPROM
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+	io_expander3: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"RTC_MUX_SEL",
+			"PCI_MUX_SEL",
+			"TPM_MUX_SEL",
+			"FAN_MUX-SEL",
+			"SGMII_MUX_SEL",
+			"DP_MUX_SEL",
+			"UPHY3_USB_SEL",
+			"NCSI_MUX_SEL",
+			"BMC_PHY_RST",
+			"RTC_CLR_L",
+			"BMC_12V_CTRL",
+			"PS_RUN_IO0_PG",
+			"",
+			"",
+			"",
+			"";
+	};
+
+	rtc@6f {
+		compatible = "nuvoton,nct3018y";
+		reg = <0x6f>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+	// SCM TEMP SENSOR BOARD
+	temperature-sensor@4b {
+		compatible = "national,lm75b";
+		reg = <0x4b>;
+	};
+
+	// SCM CPLD IOEXP
+	io_expander4: gpio@4f {
+		compatible = "nxp,pca9555";
+		reg = <0x4f>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"stby_power_en_cpld",
+			"stby_power_gd_cpld",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"";
+	};
+
+	// SCM FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	// BSM FRU EEPROM
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+	multi-master;
+	mctp-controller;
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	// OCP NIC0 TEMP
+	temperature-sensor@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+
+	// OCP NIC0 FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	ssif-bmc@10 {
+		compatible = "ssif-bmc";
+		reg = <0x10>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+	multi-master;
+
+	// HPM 1 FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+	// CBC 2 FRU
+	eeprom@54 {
+		compatible = "atmel,24c02";
+		reg = <0x54>;
+	};
+	// CBC 3 FRU
+	eeprom@55 {
+		compatible = "atmel,24c02";
+		reg = <0x55>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+	multi-master;
+
+	// HPM FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	// CBC 0 FRU
+	eeprom@54 {
+		compatible = "atmel,24c02";
+		reg = <0x54>;
+	};
+
+	// CBC 1 FRU
+	eeprom@55 {
+		compatible = "atmel,24c02";
+		reg = <0x55>;
+	};
+
+	// HMC FRU EEPROM
+	eeprom@57 {
+		compatible = "atmel,24c02";
+		reg = <0x57>;
+	};
+};
+
+&i2c14 {
+	status = "okay";
+
+	// PDB CPLD IOEXP 0x10
+	io_expander9: gpio@10 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x10>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"wSequence_Latch_State_N",
+			"wP12V_N1N2_RUNTIME_FLT_N",
+			"wP12V_FAN_RUNTIME_FLT_N",
+			"wP12V_AUX_RUNTIME_FLT_N",
+			"wHost_PERST_SEQPWR_FLT_N",
+			"wP12V_N1N2_SEQPWR_FLT_N",
+			"wP12V_FAN_SEQPWR_FLT_N",
+			"wP12V_AUX_SEQPWR_FLT_N",
+			"wP12V_RUNTIME_FLT_NIC1_N",
+			"wAUX_RUNTIME_FLT_NIC1_N",
+			"wP12V_SEQPWR_FLT_NIC1_N",
+			"wAUX_SEQPWR_FLT_NIC1_N",
+			"wP12V_RUNTIME_FLT_NIC0_N",
+			"wAUX_RUNTIME_FLT_NIC0_N",
+			"wP12V_SEQPWR_FLT_NIC0_N",
+			"wAUX_SEQPWR_FLT_NIC0_N";
+	};
+
+	// PDB CPLD IOEXP 0x11
+	io_expander10: gpio@11 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x11>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"FM_P12V_NIC1_FLTB_R_N",
+			"FM_P3V3_NIC1_FAULT_R_N",
+			"FM_P12V_NIC0_FLTB_R_N",
+			"FM_P3V3_NIC0_FAULT_R_N",
+			"P48V_HS2_FAULT_N_PLD",
+			"P48V_HS1_FAULT_N_PLD",
+			"P12V_AUX_FAN_OC_PLD_N",
+			"P12V_AUX_FAN_FAULT_PLD_N",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"FM_SYS_THROTTLE_N",
+			"OCP_V3_2_PWRBRK_FROM_HOST_ISO_PLD_N",
+			"OCP_SFF_PWRBRK_FROM_HOST_ISO_PLD_N";
+	};
+
+	// PDB CPLD IOEXP 0x12
+	io_expander11: gpio@12 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x12>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"P12V_AUX_PSU_SMB_ALERT_R_L",
+			"P12V_SCM_SENSE_ALERT_R_N",
+			"P12V_AUX_NIC1_SENSE_ALERT_R_N",
+			"P12V_AUX_NIC0_SENSE_ALERT_R_N",
+			"NODEB_PSU_SMB_ALERT_R_L",
+			"NODEA_PSU_SMB_ALERT_R_L",
+			"P12V_AUX_FAN_ALERT_PLD_N",
+			"P52V_SENSE_ALERT_PLD_N",
+			"PRSNT_RJ45_FIO_N_R",
+			"FM_MAIN_PWREN_RMC_EN_ISO_R",
+			"CHASSIS3_LEAK_Q_N_PLD",
+			"CHASSIS2_LEAK_Q_N_PLD",
+			"CHASSIS1_LEAK_Q_N_PLD",
+			"CHASSIS0_LEAK_Q_N_PLD",
+			"",
+			"SMB_RJ45_FIO_TMP_ALERT";
+	};
+
+	// PDB CPLD IOEXP 0x13
+	io_expander12: gpio@13 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x13>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"FAN_7_PRESENT_N",
+			"FAN_6_PRESENT_N",
+			"FAN_5_PRESENT_N",
+			"FAN_4_PRESENT_N",
+			"FAN_3_PRESENT_N",
+			"FAN_2_PRESENT_N",
+			"FAN_1_PRESENT_N",
+			"FAN_0_PRESENT_N",
+			"HP_LVC3_OCP_V3_2_PRSNT2_PLD_N",
+			"HP_LVC3_OCP_V3_1_PRSNT2_PLD_N",
+			"PRSNT_HDDBD_POWER_CABLE_N",
+			"PRSNT_OSFP0_POWER_CABLE_N",
+			"PRSNT_CHASSIS3_LEAK_CABLE_R_N",
+			"PRSNT_CHASSIS2_LEAK_CABLE_R_N",
+			"PRSNT_CHASSIS1_LEAK_CABLE_R_N",
+			"PRSNT_CHASSIS0_LEAK_CABLE_R_N";
+	};
+
+	// PDB CPLD IOEXP 0x14
+	io_expander13: gpio@14 {
+		compatible = "nxp,pca9555";
+		reg = <0x14>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"rmc_en_dc_pwr_on",
+			"HDD_LED_N",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"leak_config_0",
+			"leak_config_1",
+			"leak_config_2",
+			"leak_config_3",
+			"mfg_led_test_mode_l",
+			"small_leak_err_inj",
+			"large_leak_err_inj",
+			"";
+	};
+};
+
+&i2c15 {
+	status = "okay";
+	multi-master;
+	mctp-controller;
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	// OCP NIC1 TEMP
+	temperature-sensor@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+
+	// OCP NIC1 FRU EEPROM
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ncsi3_default>;
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ncsi4_default>;
+	use-ncsi;
+};
+
+&udma {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-cmm.dts
index 90a3f485c67a..24153868cc00 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-cmm.dts
@@ -328,7 +328,7 @@
 &i2c1 {
 	status = "okay";
 
-	i2c-switch@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -341,7 +341,7 @@
 			#size-cells = <0>;
 			reg = <0>;
 
-			i2c-switch@70 {
+			i2c-mux@70 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -390,7 +390,7 @@
 				};
 			};
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -446,7 +446,7 @@
 			#size-cells = <0>;
 			reg = <1>;
 
-			i2c-switch@70 {
+			i2c-mux@70 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -495,7 +495,7 @@
 				};
 			};
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -551,7 +551,7 @@
 			#size-cells = <0>;
 			reg = <2>;
 
-			i2c-switch@70 {
+			i2c-mux@70 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -600,7 +600,7 @@
 				};
 			};
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -656,7 +656,7 @@
 			#size-cells = <0>;
 			reg = <3>;
 
-			i2c-switch@70 {
+			i2c-mux@70 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -705,7 +705,7 @@
 				};
 			};
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -761,7 +761,7 @@
 			#size-cells = <0>;
 			reg = <4>;
 
-			i2c-switch@70 {
+			i2c-mux@70 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -810,7 +810,7 @@
 				};
 			};
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -866,7 +866,7 @@
 			#size-cells = <0>;
 			reg = <5>;
 
-			i2c-switch@70 {
+			i2c-mux@70 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -915,7 +915,7 @@
 				};
 			};
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -971,7 +971,7 @@
 			#size-cells = <0>;
 			reg = <6>;
 
-			i2c-switch@70 {
+			i2c-mux@70 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1020,7 +1020,7 @@
 				};
 			};
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1076,7 +1076,7 @@
 			#size-cells = <0>;
 			reg = <7>;
 
-			i2c-switch@70 {
+			i2c-mux@70 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1125,7 +1125,7 @@
 				};
 			};
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1183,7 +1183,7 @@
 &i2c2 {
 	status = "okay";
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -1281,7 +1281,7 @@
 &i2c8 {
 	status = "okay";
 
-	i2c-switch@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -1294,7 +1294,7 @@
 			#size-cells = <0>;
 			reg = <0>;
 
-			i2c-switch@70 {
+			i2c-mux@70 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1350,7 +1350,7 @@
 			#size-cells = <0>;
 			reg = <1>;
 
-			i2c-switch@70 {
+			i2c-mux@70 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1406,7 +1406,7 @@
 			#size-cells = <0>;
 			reg = <2>;
 
-			i2c-switch@70 {
+			i2c-mux@70 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1462,7 +1462,7 @@
 			#size-cells = <0>;
 			reg = <3>;
 
-			i2c-switch@70 {
+			i2c-mux@70 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dts
new file mode 100644
index 000000000000..58c107a1b6cf
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2021 Facebook Inc.
+
+/dts-v1/;
+
+#include "ast2600-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Darwin BMC";
+	compatible = "facebook,darwin-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial0 = &uart5;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			      <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			      <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+			      <&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
+	};
+
+	spi_gpio: spi {
+		num-chipselects = <1>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c0 {
+	eeprom@50 {
+		compatible = "atmel,24c512";
+		reg = <0x50>;
+	};
+};
+
+&adc0 {
+	status = "okay";
+
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		     &pinctrl_adc2_default &pinctrl_adc3_default
+		     &pinctrl_adc4_default &pinctrl_adc5_default
+		     &pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	status = "okay";
+
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		     &pinctrl_adc10_default &pinctrl_adc11_default
+		     &pinctrl_adc12_default &pinctrl_adc13_default
+		     &pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+
+	non-removable;
+	max-frequency = <25000000>;
+	bus-width = <4>;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-elbert.dts
index 27b43fe099f1..ff1009ea1c49 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-elbert.dts
@@ -44,7 +44,7 @@
 		stdout-path = &uart5;
 	};
 
-	spi_gpio: spi-gpio {
+	spi_gpio: spi {
 		num-chipselects = <1>;
 		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
 	};
@@ -65,7 +65,7 @@
 };
 
 &i2c2 {
-	i2c-switch@75 {
+	i2c-mux@75 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -123,7 +123,7 @@
 };
 
 &i2c5 {
-	i2c-switch@75 {
+	i2c-mux@75 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -183,3 +183,33 @@
 &i2c11 {
 	status = "okay";
 };
+
+/*
+ * BMC's "mac3" controller is connected to BCM53134P's IMP_RGMII port
+ * directly (fixed link, no PHY in between).
+ * Note: BMC's "mdio0" controller is connected to BCM53134P's MDIO
+ * interface, and the MDIO channel will be enabled in dts later, when
+ * BCM53134 is added to "bcm53xx" DSA driver.
+ */
+&mac3 {
+	status = "okay";
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii4_default>;
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+
+	non-removable;
+	max-frequency = <25000000>;
+	bus-width = <4>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dts
new file mode 100644
index 000000000000..48ca25f57ef6
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dts
@@ -0,0 +1,1270 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "ast2600-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Fuji BMC (64MB Datastore)";
+	compatible = "facebook,fuji-data64-bmc", "aspeed,ast2600";
+
+	aliases {
+		/*
+		 * PCA9548 (2-0070) provides 8 channels connecting to
+		 * SCM (System Controller Module).
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+
+		/*
+		 * PCA9548 (8-0070) provides 8 channels connecting to
+		 * SMB (Switch Main Board).
+		 */
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+
+		/*
+		 * PCA9548 (11-0077) provides 8 channels connecting to
+		 * SMB (Switch Main Board).
+		 */
+		i2c40 = &imux40;
+		i2c41 = &imux41;
+		i2c42 = &imux42;
+		i2c43 = &imux43;
+		i2c44 = &imux44;
+		i2c45 = &imux45;
+		i2c46 = &imux46;
+		i2c47 = &imux47;
+
+		/*
+		 * PCA9548 (24-0071) provides 8 channels connecting to
+		 * PDB-Left.
+		 */
+		i2c48 = &imux48;
+		i2c49 = &imux49;
+		i2c50 = &imux50;
+		i2c51 = &imux51;
+		i2c52 = &imux52;
+		i2c53 = &imux53;
+		i2c54 = &imux54;
+		i2c55 = &imux55;
+
+		/*
+		 * PCA9548 (25-0072) provides 8 channels connecting to
+		 * PDB-Right.
+		 */
+		i2c56 = &imux56;
+		i2c57 = &imux57;
+		i2c58 = &imux58;
+		i2c59 = &imux59;
+		i2c60 = &imux60;
+		i2c61 = &imux61;
+		i2c62 = &imux62;
+		i2c63 = &imux63;
+
+		/*
+		 * PCA9548 (26-0076) provides 8 channels connecting to
+		 * FCM1.
+		 */
+		i2c64 = &imux64;
+		i2c65 = &imux65;
+		i2c66 = &imux66;
+		i2c67 = &imux67;
+		i2c68 = &imux68;
+		i2c69 = &imux69;
+		i2c70 = &imux70;
+		i2c71 = &imux71;
+
+		/*
+		 * PCA9548 (27-0076) provides 8 channels connecting to
+		 * FCM2.
+		 */
+		i2c72 = &imux72;
+		i2c73 = &imux73;
+		i2c74 = &imux74;
+		i2c75 = &imux75;
+		i2c76 = &imux76;
+		i2c77 = &imux77;
+		i2c78 = &imux78;
+		i2c79 = &imux79;
+
+		/*
+		 * PCA9548 (40-0076) provides 8 channels connecting to
+		 * PIM1.
+		 */
+		i2c80 = &imux80;
+		i2c81 = &imux81;
+		i2c82 = &imux82;
+		i2c83 = &imux83;
+		i2c84 = &imux84;
+		i2c85 = &imux85;
+		i2c86 = &imux86;
+		i2c87 = &imux87;
+
+		/*
+		 * PCA9548 (41-0076) provides 8 channels connecting to
+		 * PIM2.
+		 */
+		i2c88 = &imux88;
+		i2c89 = &imux89;
+		i2c90 = &imux90;
+		i2c91 = &imux91;
+		i2c92 = &imux92;
+		i2c93 = &imux93;
+		i2c94 = &imux94;
+		i2c95 = &imux95;
+
+		/*
+		 * PCA9548 (42-0076) provides 8 channels connecting to
+		 * PIM3.
+		 */
+		i2c96 = &imux96;
+		i2c97 = &imux97;
+		i2c98 = &imux98;
+		i2c99 = &imux99;
+		i2c100 = &imux100;
+		i2c101 = &imux101;
+		i2c102 = &imux102;
+		i2c103 = &imux103;
+
+		/*
+		 * PCA9548 (43-0076) provides 8 channels connecting to
+		 * PIM4.
+		 */
+		i2c104 = &imux104;
+		i2c105 = &imux105;
+		i2c106 = &imux106;
+		i2c107 = &imux107;
+		i2c108 = &imux108;
+		i2c109 = &imux109;
+		i2c110 = &imux110;
+		i2c111 = &imux111;
+
+		/*
+		 * PCA9548 (44-0076) provides 8 channels connecting to
+		 * PIM5.
+		 */
+		i2c112 = &imux112;
+		i2c113 = &imux113;
+		i2c114 = &imux114;
+		i2c115 = &imux115;
+		i2c116 = &imux116;
+		i2c117 = &imux117;
+		i2c118 = &imux118;
+		i2c119 = &imux119;
+
+		/*
+		 * PCA9548 (45-0076) provides 8 channels connecting to
+		 * PIM6.
+		 */
+		i2c120 = &imux120;
+		i2c121 = &imux121;
+		i2c122 = &imux122;
+		i2c123 = &imux123;
+		i2c124 = &imux124;
+		i2c125 = &imux125;
+		i2c126 = &imux126;
+		i2c127 = &imux127;
+
+		/*
+		 * PCA9548 (46-0076) provides 8 channels connecting to
+		 * PIM7.
+		 */
+		i2c128 = &imux128;
+		i2c129 = &imux129;
+		i2c130 = &imux130;
+		i2c131 = &imux131;
+		i2c132 = &imux132;
+		i2c133 = &imux133;
+		i2c134 = &imux134;
+		i2c135 = &imux135;
+
+		/*
+		 * PCA9548 (47-0076) provides 8 channels connecting to
+		 * PIM8.
+		 */
+		i2c136 = &imux136;
+		i2c137 = &imux137;
+		i2c138 = &imux138;
+		i2c139 = &imux139;
+		i2c140 = &imux140;
+		i2c141 = &imux141;
+		i2c142 = &imux142;
+		i2c143 = &imux143;
+	};
+
+	spi_gpio: spi {
+		num-chipselects = <3>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>,
+			   <0>,	/* device reg=<1> does not exist */
+			   <&gpio0 ASPEED_GPIO(X, 2) GPIO_ACTIVE_HIGH>;
+
+		eeprom@2 {
+			compatible = "atmel,at93c46d";
+			spi-max-frequency = <250000>;
+			data-size = <16>;
+			spi-cs-high;
+			reg = <2>;
+		};
+	};
+};
+
+&fmc {
+	flash@0 {
+		/delete-node/partitions;
+#include "facebook-bmc-flash-layout-128-data64.dtsi"
+	};
+};
+
+&i2c0 {
+	multi-master;
+	bus-frequency = <1000000>;
+};
+
+&i2c2 {
+	/*
+	 * PCA9548 (2-0070) provides 8 channels connecting to SCM (System
+	 * Controller Module).
+	 */
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			adm1278@10 {
+				compatible = "adi,adm1278";
+				reg = <0x10>;
+				shunt-resistor-micro-ohms = <1500>;
+			};
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c8 {
+	/*
+	 * PCA9548 (8-0070) provides 8 channels connecting to SMB (Switch
+	 * Main Board).
+	 */
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			i2c-mux@71 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x71>;
+				i2c-mux-idle-disconnect;
+
+				imux48: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux49: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux50: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+
+					lp5012@14 {
+						compatible = "ti,lp5012";
+						reg = <0x14>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						multi-led@0 {
+							#address-cells = <1>;
+							#size-cells = <0>;
+							reg = <0>;
+							color = <LED_COLOR_ID_MULTI>;
+							function = LED_FUNCTION_ACTIVITY;
+							label = "sys";
+
+							led@0 {
+								reg = <0>;
+								color = <LED_COLOR_ID_RED>;
+							};
+
+							led@1 {
+								reg = <1>;
+								color = <LED_COLOR_ID_BLUE>;
+							};
+
+							led@2 {
+								reg = <2>;
+								color = <LED_COLOR_ID_GREEN>;
+							};
+						};
+
+						multi-led@1 {
+							#address-cells = <1>;
+							#size-cells = <0>;
+							reg = <1>;
+							color = <LED_COLOR_ID_MULTI>;
+							function = LED_FUNCTION_ACTIVITY;
+							label = "fan";
+
+							led@0 {
+								reg = <0>;
+								color = <LED_COLOR_ID_RED>;
+							};
+
+							led@1 {
+								reg = <1>;
+								color = <LED_COLOR_ID_BLUE>;
+							};
+
+							led@2 {
+								reg = <2>;
+								color = <LED_COLOR_ID_GREEN>;
+							};
+						};
+
+						multi-led@2 {
+							#address-cells = <1>;
+							#size-cells = <0>;
+							reg = <2>;
+							color = <LED_COLOR_ID_MULTI>;
+							function = LED_FUNCTION_ACTIVITY;
+							label = "psu";
+
+							led@0 {
+								reg = <0>;
+								color = <LED_COLOR_ID_RED>;
+							};
+
+							led@1 {
+								reg = <1>;
+								color = <LED_COLOR_ID_BLUE>;
+							};
+
+							led@2 {
+								reg = <2>;
+								color = <LED_COLOR_ID_GREEN>;
+							};
+						};
+
+						multi-led@3 {
+							#address-cells = <1>;
+							#size-cells = <0>;
+							reg = <3>;
+							color = <LED_COLOR_ID_MULTI>;
+							function = LED_FUNCTION_ACTIVITY;
+							label = "smb";
+
+							led@0 {
+								reg = <0>;
+								color = <LED_COLOR_ID_RED>;
+							};
+
+							led@1 {
+								reg = <1>;
+								color = <LED_COLOR_ID_BLUE>;
+							};
+
+							led@2 {
+								reg = <2>;
+								color = <LED_COLOR_ID_GREEN>;
+							};
+						};
+					};
+				};
+
+				imux51: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux52: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux53: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux54: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux55: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-mux@72 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72>;
+				i2c-mux-idle-disconnect;
+
+				imux56: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux57: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux58: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux59: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux60: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux61: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux62: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux63: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux64: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux65: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux66: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux67: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+
+					adm1278@10 {
+						compatible = "adi,adm1278";
+						reg = <0x10>;
+						shunt-resistor-micro-ohms = <250>;
+					};
+				};
+
+				imux68: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux69: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux70: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux71: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux72: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux73: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux74: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux75: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+
+					adm1278@10 {
+						compatible = "adi,adm1278";
+						reg = <0x10>;
+						shunt-resistor-micro-ohms = <250>;
+					};
+				};
+
+				imux76: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux77: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux78: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux79: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux28: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux29: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux30: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux31: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	/*
+	 * PCA9548 (11-0077) provides 8 channels connecting to SMB (Switch
+	 * Main Board).
+	 */
+	i2c-mux@77 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+
+		imux40: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux80: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux81: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux82: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux83: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux84: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux85: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux86: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux87: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux41: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux88: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux89: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux90: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux91: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux92: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux93: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux94: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux95: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux42: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux96: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux97: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux98: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux99: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux100: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux101: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux102: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux103: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux43: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux104: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux105: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux106: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux107: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux108: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux109: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux110: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux111: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux44: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux112: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux113: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux114: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux115: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux116: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux117: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux118: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux119: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux45: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux120: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux121: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux122: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux123: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux124: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux125: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux126: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux127: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux46: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux128: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux129: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux130: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux131: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux132: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux133: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux134: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux135: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux47: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux136: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux137: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux138: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux139: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux140: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux141: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux142: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux143: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&mdio1 {
+	status = "okay";
+
+	ethphy3: ethernet-phy@13 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0d>;
+	};
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+
+	non-removable;
+	max-frequency = <25000000>;
+	bus-width = <4>;
+};
+
+/*
+ * FIXME: rgmii delay is introduced by MAC (configured in u-boot now)
+ * instead of PCB on fuji board, so the "phy-mode" should be updated to
+ * "rgmii-[tx|rx]id" when the aspeed-mac driver can handle the delay
+ * properly.
+ */
+&mac3 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii4_default>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts
new file mode 100644
index 000000000000..5dc2a165e441
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+#include "aspeed-bmc-facebook-fuji-data64.dts"
+
+/ {
+	model = "Facebook Fuji BMC";
+	compatible = "facebook,fuji-bmc", "aspeed,ast2600";
+};
+
+&fmc {
+	flash@0 {
+		/delete-node/partitions;
+#include "facebook-bmc-flash-layout-128.dtsi"
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-galaxy100.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dts
index 60e875ac2461..60e875ac2461 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-galaxy100.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dts
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-greatlakes.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-greatlakes.dts
new file mode 100644
index 000000000000..49914a4a179f
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-greatlakes.dts
@@ -0,0 +1,292 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2022 Facebook Inc.
+
+/dts-v1/;
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Greatlakes BMC";
+	compatible = "facebook,greatlakes-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+				<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+				<&adc1 0>, <&adc1 2>, <&adc1 3>, <&adc1 4>,
+				<&adc1 5>, <&adc1 6>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	no-hw-checksum;
+	use-ncsi;
+	mellanox,multi-host;
+	ncsi-ctrl,start-redo-probe;
+	ncsi-ctrl,no-channel-monitor;
+	ncsi-package = <1>;
+	ncsi-channel = <1>;
+	ncsi-rexmit = <1>;
+	ncsi-timeout = <2>;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc2";
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	multi-master;
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	multi-master;
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	multi-master;
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	multi-master;
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+	mctp-controller;
+	temperature-sensor@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+	// NIC EEPROM
+	eeprom@50 {
+		compatible = "st,24c32";
+		reg = <0x50>;
+	};
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+	multi-master;
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+	eeprom@54 {
+		compatible = "atmel,24c128";
+		reg = <0x54>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+	temperature-sensor@4f {
+		compatible = "national,lm75";
+		reg = <0x4f>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&adc0 {
+	status = "okay";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+			&pinctrl_adc2_default &pinctrl_adc3_default
+			&pinctrl_adc4_default &pinctrl_adc5_default
+			&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	status = "okay";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc10_default
+			&pinctrl_adc11_default &pinctrl_adc12_default
+			&pinctrl_adc13_default &pinctrl_adc14_default>;
+};
+
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpiu1_default &pinctrl_gpiu7_default>;
+
+	gpio-line-names =
+	/*A0-A7*/ "","","","","","","","",
+	/*B0-B7*/ "power-bmc-nic","presence-ocp-debug",
+		  "power-bmc-slot1","power-bmc-slot2",
+		  "power-bmc-slot3","power-bmc-slot4","","",
+	/*C0-C7*/ "presence-ocp-nic","","","reset-cause-nic-primary",
+		  "reset-cause-nic-secondary","","","",
+	/*D0-D7*/ "","","","","","","","",
+	/*E0-E7*/ "","","","","","","","",
+	/*F0-F7*/ "slot1-bmc-reset-button","slot2-bmc-reset-button",
+		  "slot3-bmc-reset-button","slot4-bmc-reset-button",
+		  "","","","presence-emmc",
+	/*G0-G7*/ "","","","","","","","",
+	/*H0-H7*/ "","","","",
+		  "presence-mb-slot1","presence-mb-slot2",
+		  "presence-mb-slot3","presence-mb-slot4",
+	/*I0-I7*/ "","","","","","","bb-bmc-button","",
+	/*J0-J7*/ "","","","","","","","",
+	/*K0-K7*/ "","","","","","","","",
+	/*L0-L7*/ "","","","","","","","",
+	/*M0-M7*/ "","power-nic-bmc-enable","","usb-bmc-enable","","reset-cause-usb-hub","","",
+	/*N0-N7*/ "","","","","bmc-ready","","","",
+	/*O0-O7*/ "","","","","","","fan0-bmc-cpld-enable","fan1-bmc-cpld-enable",
+	/*P0-P7*/ "fan2-bmc-cpld-enable","fan3-bmc-cpld-enable",
+		  "reset-cause-pcie-slot1","reset-cause-pcie-slot2",
+		  "reset-cause-pcie-slot3","reset-cause-pcie-slot4","","",
+	/*Q0-Q7*/ "","","","","","","","",
+	/*R0-R7*/ "","","","","","","","",
+	/*S0-S7*/ "","","power-p5v-usb","presence-bmc-tpm","","","","",
+	/*T0-T7*/ "","","","","","","","",
+	/*U0-U7*/ "","","","","","","","GND",
+	/*V0-V7*/ "bmc-slot1-ac-button","bmc-slot2-ac-button",
+		  "bmc-slot3-ac-button","bmc-slot4-ac-button",
+		  "","","","",
+	/*W0-W7*/ "","","","","","","","",
+	/*X0-X7*/ "","","","","","","","",
+	/*Y0-Y7*/ "","","","reset-cause-emmc","","","","",
+	/*Z0-Z7*/ "","","","","","","","";
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/ "","","","","","","","",
+	/*18B0-18B7*/ "","","","","","","","",
+	/*18C0-18C7*/ "","","","","","","","",
+	/*18D0-18D7*/ "","","","","","","","",
+	/*18E0-18E3*/ "","","","","","","","";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
new file mode 100644
index 000000000000..1c50e4a367b2
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
@@ -0,0 +1,830 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2023 Facebook Inc.
+
+/dts-v1/;
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Harma";
+	compatible = "facebook,harma-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart4;
+		serial4 = &uart5;
+
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+
+		spi1 = &spi_gpio;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			      <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			      <&adc1 2>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bmc_heartbeat_amber";
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "fp_id_amber";
+			default-state = "off";
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "power_blue";
+			default-state = "off";
+			gpios = <&gpio0 124 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	spi_gpio: spi {
+		status = "okay";
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+};
+
+// HOST BIOS Debug
+&uart1 {
+	status = "okay";
+};
+
+// SOL Host Console
+&uart2 {
+	status = "okay";
+	pinctrl-0 = <>;
+};
+
+// SOL BMC Console
+&uart4 {
+	status = "okay";
+	pinctrl-0 = <>;
+};
+
+// BMC Debug Console
+&uart5 {
+	status = "okay";
+};
+
+// MTIA
+&uart6 {
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	use-ncsi;
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+// BIOS Flash
+&spi2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <12000000>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+	};
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	pwm@5e {
+		compatible = "maxim,max31790";
+		reg = <0x5e>;
+	};
+
+	power-sensor@40 {
+		compatible = "ti,ina238";
+		reg = <0x40>;
+		shunt-resistor = <1000>;
+	};
+
+	power-sensor@41 {
+		compatible = "ti,ina238";
+		reg = <0x41>;
+		shunt-resistor = <1000>;
+	};
+
+	power-sensor@44 {
+		compatible = "ti,ina238";
+		reg = <0x44>;
+		shunt-resistor = <1000>;
+	};
+
+	power-sensor@45 {
+		compatible = "ti,ina238";
+		reg = <0x45>;
+		shunt-resistor = <1000>;
+	};
+
+	temperature-sensor@4b {
+		compatible = "ti,tmp75";
+		reg = <0x4b>;
+	};
+
+	gpio@12 {
+		compatible = "nxp,pca9555";
+		reg = <0x12>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <116 IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","fcb2-activate",
+		"","";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	mctp-controller;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	temperature-sensor@4b {
+		compatible = "ti,tmp75";
+		reg = <0x4b>;
+	};
+
+	// MB NIC FRU
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	pwm@5e {
+		compatible = "maxim,max31790";
+		reg = <0x5e>;
+	};
+
+	power-sensor@40 {
+		compatible = "ti,ina238";
+		reg = <0x40>;
+		shunt-resistor = <1000>;
+	};
+
+	power-sensor@41 {
+		compatible = "ti,ina238";
+		reg = <0x41>;
+		shunt-resistor = <1000>;
+	};
+
+	power-sensor@44 {
+		compatible = "ti,ina238";
+		reg = <0x44>;
+		shunt-resistor = <1000>;
+	};
+
+	power-sensor@45 {
+		compatible = "ti,ina238";
+		reg = <0x45>;
+		shunt-resistor = <1000>;
+	};
+
+	temperature-sensor@4b {
+		compatible = "ti,tmp75";
+		reg = <0x4b>;
+	};
+
+	gpio@12 {
+		compatible = "nxp,pca9555";
+		reg = <0x12>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <114 IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","fcb1-activate",
+		"","";
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9543";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux20: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			//Retimer Flash
+			eeprom@50 {
+				compatible = "atmel,24c2048";
+				reg = <0x50>;
+				pagesize = <128>;
+			};
+		};
+		imux21: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			retimer@24 {
+				compatible = "asteralabs,pt5161l";
+				reg = <0x24>;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	// PDB FRU
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+
+	power-monitor@69 {
+		compatible = "pmbus";
+		reg = <0x69>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp75";
+		reg = <0x49>;
+	};
+
+	power-monitor@44 {
+		compatible = "lltc,ltc4287";
+		reg = <0x44>;
+		shunt-resistor-micro-ohms = <250>;
+	};
+
+	power-monitor@40 {
+		compatible = "infineon,xdp710";
+		reg = <0x40>;
+	};
+
+	power-sensor@45 {
+		compatible = "ti,ina238";
+		reg = <0x45>;
+		shunt-resistor = <500>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9543";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux22: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			power-monitor@45 {
+				compatible = "ti,ina230";
+				reg = <0x45>;
+			};
+
+		};
+		imux23: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			power-monitor@45 {
+				compatible = "ti,ina230";
+				reg = <0x45>;
+			};
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+
+	mctp-controller;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	gpio@30 {
+		compatible = "nxp,pca9555";
+		reg = <0x30>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+	gpio@31 {
+		compatible = "nxp,pca9555";
+		reg = <0x31>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// PTTV FRU
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	gpio@13 {
+		compatible = "nxp,pca9555";
+		reg = <0x13>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <222 IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"","",
+		"","",
+		"","",
+		"","health-mmc",
+		"","",
+		"","",
+		"","",
+		"","";
+	};
+
+	gpio@30 {
+		compatible = "nxp,pca9555";
+		reg = <0x30>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+	gpio@31 {
+		compatible = "nxp,pca9555";
+		reg = <0x31>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// Aegis FRU
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+	retimer@24 {
+		compatible = "asteralabs,pt5161l";
+		reg = <0x24>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux28: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			power-sensor@20 {
+				compatible = "mps,mp5990";
+				reg = <0x20>;
+			};
+			power-monitor@61 {
+				compatible = "isil,isl69260";
+				reg = <0x61>;
+			};
+			power-monitor@62 {
+				compatible = "isil,isl69260";
+				reg = <0x62>;
+			};
+			power-monitor@63 {
+				compatible = "isil,isl69260";
+				reg = <0x63>;
+			};
+			power-monitor@64 {
+				compatible = "infineon,xdpe152c4";
+				reg = <0x64>;
+			};
+			power-monitor@66 {
+				compatible = "infineon,xdpe152c4";
+				reg = <0x66>;
+			};
+			power-monitor@68 {
+				compatible = "infineon,xdpe152c4";
+				reg = <0x68>;
+			};
+		};
+		imux29: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			//MB FRU
+			eeprom@54 {
+				compatible = "atmel,24c64";
+				reg = <0x54>;
+			};
+
+			adc@1d {
+				compatible = "ti,adc128d818";
+				reg = <0x1d>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
+			adc@1f {
+				compatible = "ti,adc128d818";
+				reg = <0x1f>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
+		};
+		imux30: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+		imux31: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+// To Debug card
+&i2c14 {
+	status = "okay";
+	multi-master;
+
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c15 {
+	status = "okay";
+
+	// SCM FRU
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	// BSM FRU
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+};
+
+&adc0 {
+	aspeed,int-vref-microvolt = <2500000>;
+	status = "okay";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	aspeed,int-vref-microvolt = <2500000>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc10_default>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"","","","",
+			"bmc-spi-mux-select-0","led-identify","","",
+	/*C0-C7*/	"reset-cause-platrst","","","","",
+			"power-hsc-good","power-chassis-good","",
+	/*D0-D7*/	"","","sol-uart-select","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","",
+			"leakage-detect-alert","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"led-postcode-0","led-postcode-1",
+			"led-postcode-2","led-postcode-3",
+			"led-postcode-4","led-postcode-5",
+			"led-postcode-6","led-postcode-7",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"power-button","power-host-control",
+			"reset-button","","led-power","","","",
+	/*Q0-Q7*/
+			"","","","",
+			"","power-chassis-control","","uart-switch-button",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","led-identify-gate","",
+	/*V0-V7*/	"","","","",
+			"","",
+			"","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","presence-post-card","";
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/ "ac-power-button","","","","","","","",
+	/*18B0-18B7*/ "","","","","","","","",
+	/*18C0-18C7*/ "","","","","","","","",
+	/*18D0-18D7*/ "","","","","","","","",
+	/*18E0-18E3*/ "","","","","","","","";
+};
+
+&sgpiom0 {
+	status = "okay";
+	ngpios = <128>;
+	bus-frequency = <2000000>;
+	gpio-line-names =
+	/*in - out - in - out */
+	/*A0-A3 line 0-7*/
+	"presence-scm-cable","power-config-disable-e1s-0",
+	"","",
+	"","power-config-disable-e1s-1",
+	"","",
+	/*A4-A7 line 8-15*/
+	"","power-config-asic-module-enable",
+	"power-p3v3-standby","power-config-asic-power-good",
+	"power-p1v8-good","power-config-pdb-power-good",
+	"presence-cpu","smi-control-n",
+	/*B0-B3 line 16-23*/
+	"","nmi-control-n",
+	"power-pvdd33-s5","nmi-control-sync-flood-n",
+	"","",
+	"power-pvdd18-s5","",
+	/*B4-B7 line 24-31*/
+	"","FM_CPU_SP5R1",
+	"reset-cause-rsmrst","FM_CPU_SP5R2",
+	"","FM_CPU_SP5R3",
+	"","FM_CPU_SP5R4",
+	/*C0-C3 line 32-39*/
+	"","FM_CPU0_SA0",
+	"","FM_CPU0_SA1",
+	"","rt-cpu0-p0-enable",
+	"","rt-cpu0-p1-enable",
+	/*C4-C7 line 40-47*/
+	"","smb-rt-rom-p0-select",
+	"","smb-rt-rom-p1-select",
+	"","i3c-cpu-mux0-oe-n",
+	"","i3c-cpu-mux0-select",
+	/*D0-D3 line 48-55*/
+	"","i3c-cpu-mux1-oe-n",
+	"","i3c-cpu-mux1-select",
+	"","reset-control-bmc",
+	"","reset-control-cpu0-p0-mux",
+	/*D4-D7 line 56-63*/
+	"","reset-control-cpu0-p1-mux",
+	"","reset-control-e1s-mux",
+	"power-host-good","reset-control-mb-mux",
+	"host0-ready","reset-control-smb-e1s-0",
+	/*E0-E3 line 64-71*/
+	"","reset-control-smb-e1s-1",
+	"post-end-n","reset-control-srst",
+	"presence-e1s-0","reset-control-usb-hub",
+	"","reset-control",
+	/*E4-E7 line 72-79*/
+	"presence-e1s-1","reset-control-cpu-kbrst",
+	"","reset-control-platrst",
+	"","bmc-jtag-mux-select-0",
+	"","bmc-jtag-mux-select-1",
+	/*F0-F3 line 80-87*/
+	"","bmc-jtag-select",
+	"","bmc-ready-n",
+	"","bmc-ready-sgpio",
+	"","rt-cpu0-p0-force-enable",
+	/*F4-F7 line 88-95*/
+	"presence-asic-modules-0","rt-cpu0-p1-force-enable",
+	"presence-asic-modules-1","bios-debug-msg-disable",
+	"power-asic-good","uart-control-buffer-select",
+	"presence-cmm","ac-control-n",
+	/*G0-G3 line 96-103*/
+	"FM_CPU_CORETYPE2","",
+	"FM_CPU_CORETYPE1","rtc-battery-voltage-read-enable",
+	"FM_CPU_CORETYPE0","",
+	"FM_BOARD_REV_ID5","",
+	/*G4-G7 line 104-111*/
+	"FM_BOARD_REV_ID4","",
+	"FM_BOARD_REV_ID3","",
+	"FM_BOARD_REV_ID2","",
+	"FM_BOARD_REV_ID1","",
+	/*H0-H3 line 112-119*/
+	"FM_BOARD_REV_ID0","reset-control-cmos-clear",
+	"","","","","","",
+	/*H4-H7 line 120-127*/
+	"","",
+	"reset-control-pcie-expansion-3","",
+	"reset-control-pcie-expansion-2","",
+	"reset-control-pcie-expansion-1","",
+	/*I0-I3 line 128-135*/
+	"reset-control-pcie-expansion-0","",
+	"FM_EXP_SLOT_ID1","",
+	"FM_EXP_SLOT_ID0","",
+	"","",
+	/*I4-I7 line 136-143*/
+	"","","","","","","","",
+	/*J0-J3 line 144-151*/
+	"","","power-card-enable","","","","","",
+	/*J4-J7 line 152-159*/
+	"SLOT_ID_BCB_0","",
+	"SLOT_ID_BCB_1","",
+	"SLOT_ID_BCB_2","",
+	"SLOT_ID_BCB_3","",
+	/*K0-K3 line 160-167*/
+	"","","","","","","P0_I3C_APML_ALERT_L","",
+	/*K4-K7 line 168-175*/
+	"","","","","","","irq-uv-detect-alert","",
+	/*L0-L3 line 176-183*/
+	"irq-hsc-alert","",
+	"cpu0-prochot-alert","",
+	"cpu0-thermtrip-alert","",
+	"reset-cause-pcie","",
+	/*L4-L7 line 184-191*/
+	"pvdd11-ocp-alert","",
+	"power-fault-n","",
+	"asic0-card-type-detection0-n","",
+	"asic0-card-type-detection1-n","",
+	/*M0-M3 line 192-199*/
+	"asic0-card-type-detection2-n","",
+	"uart-switch-lsb","",
+	"uart-switch-msb","",
+	"power-12v-memory-good","",
+	/*M4-M7 line 200-207*/
+	"","","","","","","","",
+	/*N0-N3 line 208-215*/
+	"","","","","","","","",
+	/*N4-N7 line 216-223*/
+	"","","","","","","","",
+	/*O0-O3 line 224-231*/
+	"","",
+	"irq-pvddcore0-ocp-alert","",
+	"irq-pvddcore1-ocp-alert","",
+	"","",
+	/*O4-O7 line 232-239*/
+	"","","","","","","","",
+	/*P0-P3 line 240-247*/
+	"","","","","","","","",
+	/*P4-P7 line 248-255*/
+	"","","","","","","","";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts
new file mode 100644
index 000000000000..eb8d4b95596c
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts
@@ -0,0 +1,1619 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2023 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Minerva CMM";
+	compatible = "facebook,minerva-cmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+		serial5 = &uart6;
+		/*
+		 * PCA9548 (2-0077) provides 8 channels connecting to
+		 * 6 pcs of FCB (Fan Controller Board).
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+		i2c32 = &imux32;
+		i2c33 = &imux33;
+		i2c34 = &imux34;
+		i2c35 = &imux35;
+		i2c36 = &imux36;
+		i2c37 = &imux37;
+		i2c38 = &imux38;
+		i2c39 = &imux39;
+		i2c40 = &imux40;
+		i2c41 = &imux41;
+		i2c42 = &imux42;
+		i2c43 = &imux43;
+		i2c44 = &imux44;
+		i2c45 = &imux45;
+		i2c46 = &imux46;
+		i2c47 = &imux47;
+
+		spi1 = &spi_gpio;
+	};
+
+	chosen {
+		stdout-path = "serial5:57600n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			<&adc1 2>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bmc_heartbeat_amber";
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "fp_id_amber";
+			default-state = "off";
+			gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "power_blue";
+			default-state = "off";
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-3 {
+			label = "fan_status_led";
+			gpios = <&leds_gpio 9 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-4 {
+			label = "fan_fault_led_n";
+			gpios = <&leds_gpio 10 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-5 {
+			label = "bmc_ready_noled";
+			gpios = <&sgpiom0 141 (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+		};
+	};
+
+	spi_gpio: spi {
+		status = "okay";
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+};
+
+&uart6 {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+};
+
+&mac3 {
+	status = "okay";
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
+};
+
+&mdio3 {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&sgpiom0 {
+	status = "okay";
+	ngpios = <128>;
+	bus-frequency = <2000000>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	power-monitor@40 {
+		compatible = "ti,ina230";
+		reg = <0x40>;
+		shunt-resistor = <1000>;
+	};
+
+	power-monitor@41 {
+		compatible = "ti,ina230";
+		reg = <0x41>;
+		shunt-resistor = <1000>;
+	};
+
+	power-monitor@44 {
+		compatible = "lltc,ltc4287";
+		reg = <0x44>;
+		shunt-resistor-micro-ohms = <2000>;
+	};
+
+	power-monitor@43 {
+		compatible = "infineon,xdp710";
+		reg = <0x43>;
+	};
+
+	leds_gpio: gpio@19 {
+		compatible = "nxp,pca9555";
+		reg = <0x19>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@11 {
+		compatible = "nxp,pca9555";
+		reg = <0x11>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <238 IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"PWRGD_P24V_SMPWROK", "P1V5_PWROK",
+		"P3V3_PWROK", "P5V_PWROK",
+		"P12V_SCM_PWROK", "P12V_PWROK",
+		"P24V_PWROK", "P48V_HSC_PWROK",
+		"ERR_GPIO_IRQ", "TMP75_ALERT_N",
+		"BMC_PWROK", "P12V_INA230_ALERT_N",
+		"P24V_INA230_ALERT_N","",
+		"P48V_HSC_ALERT_N", "P1V05_PWROK";
+	};
+
+	gpio@12 {
+		compatible = "nxp,pca9555";
+		reg = <0x12>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <240 IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"P1V05_PWR_FAIL", "P1V5_PWR_FAIL",
+		"P24V_PWR_FAIL", "P24V_SM_PWR_FAIL",
+		"IRQ_NW0/1/2_N", "IRQ_NW3/4/5_N",
+		"RTC_INT_N_R", "ERR_GPIO_IRQ",
+		"", "",
+		"", "",
+		"", "",
+		"", "";
+	};
+
+	gpio@13 {
+		compatible = "nxp,pca9555";
+		reg = <0x13>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <242 IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"", "",
+		"", "",
+		"", "",
+		"", "",
+		"RACKMON_A_1", "RACKMON_A_2",
+		"RACKMON_B_1", "RACKMON_B_2",
+		"", "",
+		"", "";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	temperature-sensor@4b {
+		compatible = "ti,tmp75";
+		reg = <0x4b>;
+	};
+
+	temperature-sensor@4f {
+		compatible = "ti,tmp75";
+		reg = <0x4f>;
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c128";
+		reg = <0x54>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9548";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		// FCB 1
+		imux16: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			pwm@5e {
+				compatible = "maxim,max31790";
+				reg = <0x5e>;
+			};
+
+			power-sensor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@41 {
+				compatible = "ti,ina238";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+
+			temperature-sensor@4b {
+				compatible = "ti,tmp75";
+				reg = <0x4b>;
+			};
+
+			gpio@11 {
+				compatible = "nxp,pca9555";
+				reg = <0x11>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <218 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"P48V_FAN1_PWRGD_R", "P48V_FAN2_PWRGD_R",
+				"P48V_FAN3_PWRGD_R", "P48V_FAN4_PWRGD_R",
+				"FCB_1_P48V_ZONE0_PWRGD_R", "FCB_1_P48V_ZONE1_PWRGD_R",
+				"FCB_1_PWRGD_P3V3_R", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@12 {
+				compatible = "nxp,pca9555";
+				reg = <0x12>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <218 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"INA238_FAN1_ALERT_N", "INA238_FAN2_ALERT_N",
+				"INA238_FAN3_ALERT_N", "INA238_FAN4_ALERT_N",
+				"FCB_1_TMP75_ALERT_N", "",
+				"", "",
+				"FAN1_PRSNT", "FAN2_PRSNT",
+				"FAN3_PRSNT", "FAN4_PRSNT",
+				"", "",
+				"", "";
+			};
+
+			gpio@13 {
+				compatible = "nxp,pca9555";
+				reg = <0x13>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <218 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FAN1_IL_TACH_ALERT", "FAN1_OL_TACH_ALERT",
+				"FAN2_IL_TACH_ALERT", "FAN2_OL_TACH_ALERT",
+				"FAN3_IL_TACH_ALERT", "FAN3_OL_TACH_ALERT",
+				"FAN4_IL_TACH_ALERT", "FAN4_IL_TACH_ALERT",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@17 {
+				compatible = "nxp,pca9555";
+				reg = <0x17>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <218 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FCB_1_P1V0_POWER_FAIL", "FCB_1_P1V8_POWER_FAIL",
+				"FCB_1_P48V_ZONE0_POWER_FAIL", "FAN1_POWER_FAIL",
+				"FAN2_POWER_FAIL", "FAN3_POWER_FAIL",
+				"FAN4_POWER_FAIL", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+		};
+		// FCB 2
+		imux17: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			pwm@5e {
+				compatible = "maxim,max31790";
+				reg = <0x5e>;
+			};
+
+			power-sensor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@41 {
+				compatible = "ti,ina238";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+
+			temperature-sensor@4b {
+				compatible = "ti,tmp75";
+				reg = <0x4b>;
+			};
+
+			gpio@11 {
+				compatible = "nxp,pca9555";
+				reg = <0x11>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <220 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"P48V_FAN5_PWRGD_R", "P48V_FAN6_PWRGD_R",
+				"P48V_FAN7_PWRGD_R", "P48V_FAN8_PWRGD_R",
+				"FCB_2_P48V_ZONE0_PWRGD_R", "FCB_2_P48V_ZONE1_PWRGD_R",
+				"FCB_2_PWRGD_P3V3_R", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@12 {
+				compatible = "nxp,pca9555";
+				reg = <0x12>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <220 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"INA238_FAN5_ALERT_N", "INA238_FAN6_ALERT_N",
+				"INA238_FAN7_ALERT_N", "INA238_FAN8_ALERT_N",
+				"FCB_2_TMP75_ALERT_N", "",
+				"", "",
+				"FAN5_PRSNT", "FAN6_PRSNT",
+				"FAN7_PRSNT", "FAN8_PRSNT",
+				"", "",
+				"", "";
+			};
+
+			gpio@13 {
+				compatible = "nxp,pca9555";
+				reg = <0x13>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <220 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FAN5_IL_TACH_ALERT", "FAN5_OL_TACH_ALERT",
+				"FAN6_IL_TACH_ALERT", "FAN6_OL_TACH_ALERT",
+				"FAN7_IL_TACH_ALERT", "FAN7_OL_TACH_ALERT",
+				"FAN8_IL_TACH_ALERT", "FAN8_IL_TACH_ALERT",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@17 {
+				compatible = "nxp,pca9555";
+				reg = <0x17>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <220 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FCB_2_P1V0_POWER_FAIL", "FCB_2_P1V8_POWER_FAIL",
+				"FCB_2_P48V_ZONE0_POWER_FAIL", "FAN5_POWER_FAIL",
+				"FAN6_POWER_FAIL", "FAN7_POWER_FAIL",
+				"FAN8_POWER_FAIL", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+		};
+		// FCB 3
+		imux18: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			pwm@5e {
+				compatible = "maxim,max31790";
+				reg = <0x5e>;
+			};
+
+			power-sensor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@41 {
+				compatible = "ti,ina238";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+
+			temperature-sensor@4b {
+				compatible = "ti,tmp75";
+				reg = <0x4b>;
+			};
+
+			gpio@11 {
+				compatible = "nxp,pca9555";
+				reg = <0x11>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <230 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"P48V_FAN9_PWRGD_R", "P48V_FAN10_PWRGD_R",
+				"P48V_FAN11_PWRGD_R", "P48V_FAN12_PWRGD_R",
+				"FCB_3_P48V_ZONE0_PWRGD_R", "FCB_3_P48V_ZONE1_PWRGD_R",
+				"FCB_3_PWRGD_P3V3_R", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@12 {
+				compatible = "nxp,pca9555";
+				reg = <0x12>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <230 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"INA238_FAN9_ALERT_N", "INA238_FAN10_ALERT_N",
+				"INA238_FAN11_ALERT_N", "INA238_FAN12_ALERT_N",
+				"FCB_3_TMP75_ALERT_N", "",
+				"", "",
+				"FAN9_PRSNT", "FAN10_PRSNT",
+				"FAN11_PRSNT", "FAN12_PRSNT",
+				"", "",
+				"", "";
+			};
+
+			gpio@13 {
+				compatible = "nxp,pca9555";
+				reg = <0x13>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <230 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FAN9_IL_TACH_ALERT", "FAN9_OL_TACH_ALERT",
+				"FAN10_IL_TACH_ALERT", "FAN10_OL_TACH_ALERT",
+				"FAN11_IL_TACH_ALERT", "FAN11_OL_TACH_ALERT",
+				"FAN12_IL_TACH_ALERT", "FAN12_IL_TACH_ALERT",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@17 {
+				compatible = "nxp,pca9555";
+				reg = <0x17>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <230 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FCB_3_P1V0_POWER_FAIL", "FCB_3_P1V8_POWER_FAIL",
+				"FCB_3_P48V_ZONE0_POWER_FAIL", "FAN9_POWER_FAIL",
+				"FAN10_POWER_FAIL", "FAN11_POWER_FAIL",
+				"FAN12_POWER_FAIL", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+		};
+		// FCB 4
+		imux19: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			pwm@5e {
+				compatible = "maxim,max31790";
+				reg = <0x5e>;
+			};
+
+			power-sensor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@41 {
+				compatible = "ti,ina238";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+
+			temperature-sensor@4b {
+				compatible = "ti,tmp75";
+				reg = <0x4b>;
+			};
+
+			gpio@11 {
+				compatible = "nxp,pca9555";
+				reg = <0x11>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <232 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"P48V_FAN13_PWRGD_R", "P48V_FAN14_PWRGD_R",
+				"P48V_FAN15_PWRGD_R", "P48V_FAN16_PWRGD_R",
+				"FCB_4_P48V_ZONE0_PWRGD_R", "FCB_4_P48V_ZONE1_PWRGD_R",
+				"FCB_4_PWRGD_P3V3_R", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@12 {
+				compatible = "nxp,pca9555";
+				reg = <0x12>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <232 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"INA238_FAN13_ALERT_N", "INA238_FAN14_ALERT_N",
+				"INA238_FAN15_ALERT_N", "INA238_FAN16_ALERT_N",
+				"FCB_4_TMP75_ALERT_N", "",
+				"", "",
+				"FAN13_PRSNT", "FAN14_PRSNT",
+				"FAN15_PRSNT", "FAN16_PRSNT",
+				"", "",
+				"", "";
+			};
+
+			gpio@13 {
+				compatible = "nxp,pca9555";
+				reg = <0x13>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <232 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FAN13_IL_TACH_ALERT", "FAN13_OL_TACH_ALERT",
+				"FAN14_IL_TACH_ALERT", "FAN14_OL_TACH_ALERT",
+				"FAN15_IL_TACH_ALERT", "FAN15_OL_TACH_ALERT",
+				"FAN16_IL_TACH_ALERT", "FAN16_IL_TACH_ALERT",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@17 {
+				compatible = "nxp,pca9555";
+				reg = <0x17>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <232 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FCB_4_P1V0_POWER_FAIL", "FCB_4_P1V8_POWER_FAIL",
+				"FCB_4_P48V_ZONE0_POWER_FAIL", "FAN13_POWER_FAIL",
+				"FAN14_POWER_FAIL", "FAN15_POWER_FAIL",
+				"FAN16_POWER_FAIL", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+		};
+		// FCB 5
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			pwm@5e {
+				compatible = "maxim,max31790";
+				reg = <0x5e>;
+			};
+
+			power-sensor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@41 {
+				compatible = "ti,ina238";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+			temperature-sensor@4b {
+				compatible = "ti,tmp75";
+				reg = <0x4b>;
+			};
+
+			gpio@11 {
+				compatible = "nxp,pca9555";
+				reg = <0x11>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <254 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"P48V_FAN20_PWRGD_R", "P48V_FAN19_PWRGD_R",
+				"P48V_FAN18_PWRGD_R", "P48V_FAN17_PWRGD_R",
+				"FCB_5_P48V_ZONE0_PWRGD_R", "FCB_5_P48V_ZONE1_PWRGD_R",
+				"FCB_5_PWRGD_P3V3_R", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@12 {
+				compatible = "nxp,pca9555";
+				reg = <0x12>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <254 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"INA238_FAN20_ALERT_N", "INA238_FAN19_ALERT_N",
+				"INA238_FAN18_ALERT_N", "INA238_FAN17_ALERT_N",
+				"FCB_5_TMP75_ALERT_N", "",
+				"", "",
+				"FAN20_PRSNT", "FAN19_PRSNT",
+				"FAN18_PRSNT", "FAN17_PRSNT",
+				"", "",
+				"", "";
+			};
+
+			gpio@13 {
+				compatible = "nxp,pca9555";
+				reg = <0x13>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <254 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FAN20_IL_TACH_ALERT", "FAN20_OL_TACH_ALERT",
+				"FAN19_IL_TACH_ALERT", "FAN19_OL_TACH_ALERT",
+				"FAN18_IL_TACH_ALERT", "FAN18_OL_TACH_ALERT",
+				"FAN17_IL_TACH_ALERT", "FAN17_OL_TACH_ALERT",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@17 {
+				compatible = "nxp,pca9555";
+				reg = <0x17>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <254 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FCB_5_P1V0_POWER_FAIL", "FCB_5_P1V8_POWER_FAIL",
+				"FCB_5_P48V_ZONE0_POWER_FAIL", "FAN20_POWER_FAIL",
+				"FAN19_POWER_FAIL", "FAN18_POWER_FAIL",
+				"FAN17_POWER_FAIL", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+		};
+		// FCB 6
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			pwm@5e {
+				compatible = "maxim,max31790";
+				reg = <0x5e>;
+			};
+
+			power-sensor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@41 {
+				compatible = "ti,ina238";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+			temperature-sensor@4b {
+				compatible = "ti,tmp75";
+				reg = <0x4b>;
+			};
+
+			gpio@11 {
+				compatible = "nxp,pca9555";
+				reg = <0x11>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <252 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"P48V_FAN24_PWRGD_R", "P48V_FAN23_PWRGD_R",
+				"P48V_FAN22_PWRGD_R", "P48V_FAN21_PWRGD_R",
+				"FCB_6_P48V_ZONE0_PWRGD_R", "FCB_6_P48V_ZONE1_PWRGD_R",
+				"FCB_6_PWRGD_P3V3_R", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@12 {
+				compatible = "nxp,pca9555";
+				reg = <0x12>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <252 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"INA238_FAN24_ALERT_N", "INA238_FAN23_ALERT_N",
+				"INA238_FAN22_ALERT_N", "INA238_FAN21_ALERT_N",
+				"FCB_6_TMP75_ALERT_N", "",
+				"", "",
+				"FAN24_PRSNT", "FAN23_PRSNT",
+				"FAN22_PRSNT", "FAN21_PRSNT",
+				"", "",
+				"", "";
+			};
+
+			gpio@13 {
+				compatible = "nxp,pca9555";
+				reg = <0x13>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <252 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FAN24_IL_TACH_ALERT", "FAN24_OL_TACH_ALERT",
+				"FAN23_IL_TACH_ALERT", "FAN23_OL_TACH_ALERT",
+				"FAN22_IL_TACH_ALERT", "FAN22_OL_TACH_ALERT",
+				"FAN21_IL_TACH_ALERT", "FAN21_OL_TACH_ALERT",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@17 {
+				compatible = "nxp,pca9555";
+				reg = <0x17>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <252 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FCB_6_P1V0_POWER_FAIL", "FCB_6_P1V8_POWER_FAIL",
+				"FCB_6_P48V_ZONE0_POWER_FAIL", "FAN24_POWER_FAIL",
+				"FAN23_POWER_FAIL", "FAN22_POWER_FAIL",
+				"FAN21_POWER_FAIL", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+		};
+
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9545";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9545";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux28: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux29: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux30: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux31: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9545";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux32: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux33: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux34: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux35: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9545";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux36: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux37: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux38: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux39: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux40: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux41: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux42: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux43: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux44: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux45: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux46: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux47: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c14 {
+	status = "okay";
+	multi-master;
+
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c15 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+};
+
+&adc0 {
+	aspeed,int-vref-microvolt = <2500000>;
+	status = "okay";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	aspeed,int-vref-microvolt = <2500000>;
+	status = "okay";
+	pinctrl-0 = <&pinctrl_adc10_default>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","BLADE_UART_SEL2","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","BLADE_UART_SEL0","","","",
+	/*M0-M7*/	"","","","","","BLADE_UART_SEL1","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","power-chassis-control","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","host0-ready",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","BAT_DETECT","","power-chassis-good","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","BLADE_UART_SEL3","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+};
+
+&sgpiom0 {
+	gpio-line-names =
+	/*"input pin","output pin"*/
+	/*A0 - A7*/
+	"PRSNT_MTIA_BLADE1_N","PWREN_MTIA_BLADE1_EN_N",
+	"PRSNT_MTIA_BLADE2_N","PWREN_MTIA_BLADE2_EN_N",
+	"PRSNT_MTIA_BLADE3_N","PWREN_MTIA_BLADE3_EN_N",
+	"PRSNT_MTIA_BLADE4_N","PWREN_MTIA_BLADE4_EN_N",
+	"PRSNT_MTIA_BLADE5_N","PWREN_MTIA_BLADE5_EN_N",
+	"PRSNT_MTIA_BLADE6_N","PWREN_MTIA_BLADE6_EN_N",
+	"PRSNT_MTIA_BLADE7_N","PWREN_MTIA_BLADE7_EN_N",
+	"PRSNT_MTIA_BLADE8_N","PWREN_MTIA_BLADE8_EN_N",
+	/*B0 - B7*/
+	"PRSNT_MTIA_BLADE9_N","PWREN_MTIA_BLADE9_EN_N",
+	"PRSNT_MTIA_BLADE10_N","PWREN_MTIA_BLADE10_EN_N",
+	"PRSNT_MTIA_BLADE11_N","PWREN_MTIA_BLADE11_EN_N",
+	"PRSNT_MTIA_BLADE12_N","PWREN_MTIA_BLADE12_EN_N",
+	"PRSNT_MTIA_BLADE13_N","PWREN_MTIA_BLADE13_EN_N",
+	"PRSNT_MTIA_BLADE14_N","PWREN_MTIA_BLADE14_EN_N",
+	"PRSNT_MTIA_BLADE15_N","PWREN_MTIA_BLADE15_EN_N",
+	"PRSNT_MTIA_BLADE16_N","PWREN_MTIA_BLADE16_EN_N",
+	/*C0 - C7*/
+	"PRSNT_NW_BLADE1_N","PWREN_NW_BLADE1_EN_N",
+	"PRSNT_NW_BLADE2_N","PWREN_NW_BLADE2_EN_N",
+	"PRSNT_NW_BLADE3_N","PWREN_NW_BLADE3_EN_N",
+	"PRSNT_NW_BLADE4_N","PWREN_NW_BLADE4_EN_N",
+	"PRSNT_NW_BLADE5_N","PWREN_NW_BLADE5_EN_N",
+	"PRSNT_NW_BLADE6_N","PWREN_NW_BLADE6_EN_N",
+	"PRSNT_FCB_1_N","PWREN_MTIA_BLADE1_HSC_EN_N",
+	"PRSNT_FCB_2_N","PWREN_MTIA_BLADE2_HSC_EN_N",
+	/*D0 - D7*/
+	"PRSNT_FCB_3_N","PWREN_MTIA_BLADE3_HSC_EN_N",
+	"PRSNT_FCB_4_N","PWREN_MTIA_BLADE4_HSC_EN_N",
+	"PRSNT_FCB_6_N","PWREN_MTIA_BLADE5_HSC_EN_N",
+	"PRSNT_FCB_5_N","PWREN_MTIA_BLADE6_HSC_EN_N",
+	"PWRGD_MTIA_BLADE1_PWROK_N","PWREN_MTIA_BLADE7_HSC_EN_N",
+	"PWRGD_MTIA_BLADE2_PWROK_N","PWREN_MTIA_BLADE8_HSC_EN_N",
+	"PWRGD_MTIA_BLADE3_PWROK_N","PWREN_MTIA_BLADE9_HSC_EN_N",
+	"PWRGD_MTIA_BLADE4_PWROK_N","PWREN_MTIA_BLADE10_HSC_EN_N",
+	/*E0 - E7*/
+	"PWRGD_MTIA_BLADE5_PWROK_N","PWREN_MTIA_BLADE11_HSC_EN_N",
+	"PWRGD_MTIA_BLADE6_PWROK_N","PWREN_MTIA_BLADE12_HSC_EN_N",
+	"PWRGD_MTIA_BLADE7_PWROK_N","PWREN_MTIA_BLADE13_HSC_EN_N",
+	"PWRGD_MTIA_BLADE8_PWROK_N","PWREN_MTIA_BLADE14_HSC_EN_N",
+	"PWRGD_MTIA_BLADE9_PWROK_N","PWREN_MTIA_BLADE15_HSC_EN_N",
+	"PWRGD_MTIA_BLADE10_PWROK_N","PWREN_MTIA_BLADE16_HSC_EN_N",
+	"PWRGD_MTIA_BLADE11_PWROK_N","PWREN_NW_BLADE1_HSC_EN_N",
+	"PWRGD_MTIA_BLADE12_PWROK_N","PWREN_NW_BLADE2_HSC_EN_N",
+	/*F0 - F7*/
+	"PWRGD_MTIA_BLADE13_PWROK_N","PWREN_NW_BLADE3_HSC_EN_N",
+	"PWRGD_MTIA_BLADE14_PWROK_N","PWREN_NW_BLADE4_HSC_EN_N",
+	"PWRGD_MTIA_BLADE15_PWROK_N","PWREN_NW_BLADE5_HSC_EN_N",
+	"PWRGD_MTIA_BLADE16_PWROK_N","PWREN_NW_BLADE6_HSC_EN_N",
+	"PWRGD_NW_BLADE1_PWROK_N","PWREN_SGPIO_FCB_2_EN_N",
+	"PWRGD_NW_BLADE2_PWROK_N","PWREN_SGPIO_FCB_1_EN_N",
+	"PWRGD_NW_BLADE3_PWROK_N","PWREN_SGPIO_FCB_4_EN_N",
+	"PWRGD_NW_BLADE4_PWROK_N","PWREN_SGPIO_FCB_3_EN_N",
+	/*G0 - G7*/
+	"PWRGD_NW_BLADE5_PWROK_N","PWREN_SGPIO_FCB_5_EN_N",
+	"PWRGD_NW_BLADE6_PWROK_N","PWREN_SGPIO_FCB_6_EN_N",
+	"PWRGD_FCB_1","FM_BMC_RST_RTCRST_R",
+	"PWRGD_FCB_2","",
+	"PWRGD_FCB_3","FM_MDIO_SW_SEL",
+	"PWRGD_FCB_4","FM_P24V_SMPWR_EN",
+	"PWRGD_FCB_6","",
+	"PWRGD_FCB_5","",
+	/*H0 - H7*/
+	"LEAK_DETECT_MTIA_BLADE1_N","",
+	"LEAK_DETECT_MTIA_BLADE2_N","",
+	"LEAK_DETECT_MTIA_BLADE3_N","",
+	"LEAK_DETECT_MTIA_BLADE4_N","",
+	"LEAK_DETECT_MTIA_BLADE5_N","",
+	"LEAK_DETECT_MTIA_BLADE6_N","",
+	"LEAK_DETECT_MTIA_BLADE7_N","ERR_INJECT_CMM_PWR_FAIL_N",
+	"LEAK_DETECT_MTIA_BLADE8_N","",
+	/*I0 - I7*/
+	"LEAK_DETECT_MTIA_BLADE9_N","RST_I2CRST_FCB_5_N",
+	"LEAK_DETECT_MTIA_BLADE10_N","RST_I2CRST_FCB_6_N",
+	"LEAK_DETECT_MTIA_BLADE11_N","RST_I2CRST_FCB_4_N",
+	"LEAK_DETECT_MTIA_BLADE12_N","RST_I2CRST_FCB_3_N",
+	"LEAK_DETECT_MTIA_BLADE13_N","RST_I2CRST_FCB_2_N",
+	"LEAK_DETECT_MTIA_BLADE14_N","RST_I2CRST_FCB_1_N",
+	"LEAK_DETECT_MTIA_BLADE15_N","BMC_READY",
+	"LEAK_DETECT_MTIA_BLADE16_N","FM_88E6393X_BIN_UPDATE_EN_N",
+	/*J0 - J7*/
+	"LEAK_DETECT_NW_BLADE1_N","WATER_VALVE_CLOSED_N",
+	"LEAK_DETECT_NW_BLADE2_N","",
+	"LEAK_DETECT_NW_BLADE3_N","",
+	"LEAK_DETECT_NW_BLADE4_N","",
+	"LEAK_DETECT_NW_BLADE5_N","",
+	"LEAK_DETECT_NW_BLADE6_N","",
+	"PWRGD_MTIA_BLADE1_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE2_HSC_PWROK_N","",
+	/*K0 - K7*/
+	"PWRGD_MTIA_BLADE3_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE4_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE5_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE6_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE7_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE8_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE9_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE10_HSC_PWROK_N","",
+	/*L0 - L7*/
+	"PWRGD_MTIA_BLADE11_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE12_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE13_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE14_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE15_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE16_HSC_PWROK_N","",
+	"PWRGD_NW_BLADE1_HSC_PWROK_N","",
+	"PWRGD_NW_BLADE2_HSC_PWROK_N","",
+	/*M0 - M7*/
+	"PWRGD_NW_BLADE3_HSC_PWROK_N","",
+	"PWRGD_NW_BLADE4_HSC_PWROK_N","",
+	"PWRGD_NW_BLADE5_HSC_PWROK_N","",
+	"PWRGD_NW_BLADE6_HSC_PWROK_N","",
+	"RPU_READY","",
+	"IT_GEAR_RPU_LINK_N","",
+	"IT_GEAR_LEAK","",
+	"WATER_VALVE_CLOSED_N","",
+	/*N0 - N7*/
+	"VALVE_STATUS_0","",
+	"VALVE_STATUS_1","",
+	"PCA9555_IRQ1_N","",
+	"PCA9555_IRQ2_N","",
+	"CR_TOGGLE_BOOT_N","",
+	"IRQ_FCB_1_N","",
+	"IRQ_FCB_2_N","",
+	"CMM_CABLE_CARTRIDGE_PRSNT_BOT_N","",
+	/*O0 - O7*/
+	"CMM_CABLE_CARTRIDGE_PRSNT_TOP_N","",
+	"BOT_BCB_CABLE_PRSNT_N","",
+	"TOP_BCB_CABLE_PRSNT_N","",
+	"IRQ_FCB_3_N","",
+	"IRQ_FCB_4_N","",
+	"CHASSIS_LEAK0_DETECT_N","",
+	"CHASSIS_LEAK1_DETECT_N","",
+	"PCA9555_IRQ3_N","",
+	/*P0 - P7*/
+	"PCA9555_IRQ4_N","",
+	"PCA9555_IRQ5_N","",
+	"CMM_AC_PWR_BTN_N","",
+	"RPU_READY_SPARE","",
+	"IT_GEAR_LEAK_SPARE","",
+	"IT_GEAR_RPU_LINK_SPARE_N","",
+	"IRQ_FCB_6_N","",
+	"IRQ_FCB_5_N","";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minipack.dts
index 230d16cd9967..aafd1042b6e5 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minipack.dts
@@ -344,7 +344,7 @@
 	 * I2C Switch 2-0070 is connecting to SCM (System Controller
 	 * Module).
 	 */
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -425,7 +425,7 @@
 &i2c8 {
 	status = "okay";
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -441,7 +441,7 @@
 			#size-cells = <0>;
 			reg = <0>;
 
-			i2c-switch@71 {
+			i2c-mux@71 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -507,7 +507,7 @@
 			#size-cells = <0>;
 			reg = <1>;
 
-			i2c-switch@72 {
+			i2c-mux@72 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -573,7 +573,7 @@
 			#size-cells = <0>;
 			reg = <2>;
 
-			i2c-switch@76 {
+			i2c-mux@76 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -639,7 +639,7 @@
 			#size-cells = <0>;
 			reg = <3>;
 
-			i2c-switch@76 {
+			i2c-mux@76 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -729,7 +729,7 @@
 	 * I2C Switch 9-0070 is connecting to MAC/PHY EEPROMs on SMB
 	 * (Switch Main Board).
 	 */
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -793,7 +793,7 @@
 &i2c11 {
 	status = "okay";
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -809,7 +809,7 @@
 			#size-cells = <0>;
 			reg = <0>;
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -875,7 +875,7 @@
 			#size-cells = <0>;
 			reg = <1>;
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -941,7 +941,7 @@
 			#size-cells = <0>;
 			reg = <2>;
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1007,7 +1007,7 @@
 			#size-cells = <0>;
 			reg = <3>;
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1073,7 +1073,7 @@
 			#size-cells = <0>;
 			reg = <4>;
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1139,7 +1139,7 @@
 			#size-cells = <0>;
 			reg = <5>;
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1205,7 +1205,7 @@
 			#size-cells = <0>;
 			reg = <6>;
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1271,7 +1271,7 @@
 			#size-cells = <0>;
 			reg = <7>;
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9548";
 				#address-cells = <1>;
 				#size-cells = <0>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts
new file mode 100644
index 000000000000..f74f463cc878
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts
@@ -0,0 +1,1889 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2025 Facebook Inc.
+
+/dts-v1/;
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Santabarbara BMC";
+	compatible = "facebook,santabarbara-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial0 = &uart1;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		i2c16 = &i2c4mux0ch0;
+		i2c17 = &i2c4mux0ch1;
+		i2c18 = &i2c4mux0ch2;
+		i2c19 = &i2c4mux0ch3;
+		i2c20 = &i2c4mux0ch4;
+		i2c21 = &i2c4mux0ch5;
+		i2c22 = &i2c4mux0ch6;
+		i2c23 = &i2c4mux0ch7;
+		i2c24 = &i2c5mux0ch0;
+		i2c25 = &i2c5mux0ch1;
+		i2c26 = &i2c5mux0ch2;
+		i2c27 = &i2c5mux0ch3;
+		i2c28 = &i2c5mux1ch0;
+		i2c29 = &i2c5mux1ch1;
+		i2c30 = &i2c5mux1ch2;
+		i2c31 = &i2c5mux1ch3;
+		i2c32 = &i2c12mux0ch0;
+		i2c33 = &i2c12mux0ch1;
+		i2c34 = &i2c12mux0ch2;
+		i2c35 = &i2c12mux0ch3;
+		i2c36 = &i2c12mux0ch4;
+		i2c37 = &i2c12mux0ch5;
+		i2c38 = &i2c12mux0ch6;
+		i2c39 = &i2c12mux0ch7;
+		i2c48 = &i2c6mux0ch0;
+		i2c49 = &i2c6mux0ch1;
+		i2c50 = &i2c6mux0ch2;
+		i2c51 = &i2c6mux0ch3;
+		i2c52 = &i2c8mux0ch0;
+		i2c53 = &i2c8mux0ch1;
+		i2c54 = &i2c8mux0ch2;
+		i2c55 = &i2c8mux0ch3;
+		i2c56 = &i2c10mux0ch0;
+		i2c57 = &i2c10mux0ch1;
+		i2c58 = &i2c10mux0ch2;
+		i2c59 = &i2c10mux0ch3;
+		i2c60 = &i2c13mux0ch0;
+		i2c61 = &i2c13mux0ch1;
+		i2c62 = &i2c13mux0ch2;
+		i2c63 = &i2c13mux0ch3;
+		i2c64 = &i2c6mux1ch0;
+		i2c65 = &i2c6mux1ch1;
+		i2c66 = &i2c6mux1ch2;
+		i2c67 = &i2c6mux1ch3;
+		i2c68 = &i2c8mux1ch0;
+		i2c69 = &i2c8mux1ch1;
+		i2c70 = &i2c8mux1ch2;
+		i2c71 = &i2c8mux1ch3;
+		i2c72 = &i2c10mux1ch0;
+		i2c73 = &i2c10mux1ch1;
+		i2c74 = &i2c10mux1ch2;
+		i2c75 = &i2c10mux1ch3;
+		i2c76 = &i2c13mux1ch0;
+		i2c77 = &i2c13mux1ch1;
+		i2c78 = &i2c13mux1ch2;
+		i2c79 = &i2c13mux1ch3;
+	};
+
+	chosen {
+		stdout-path = "serial4:57600n8";
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			      <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			      <&adc1 2>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bmc_heartbeat_amber";
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "fp_id_amber";
+			default-state = "off";
+			gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "power_blue";
+			default-state = "off";
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-3 {
+			label = "bmc_ready_noled";
+			gpios = <&gpio0 ASPEED_GPIO(B, 3) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	p3v3_bmc_aux: regulator-p3v3-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p3v3_bmc_aux";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	spi_gpio: spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+		status = "okay";
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+};
+
+&adc0 {
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+	status = "okay";
+};
+
+&adc1 {
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc10_default>;
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"rtc-battery-voltage-read-enable","","","BMC_READY",
+			"","led-identify","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"FM_MUX1_SEL_R","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"led-postcode-0","led-postcode-1",
+			"led-postcode-2","led-postcode-3",
+			"led-postcode-4","led-postcode-5",
+			"led-postcode-6","led-postcode-7",
+	/*O0-O7*/	"","","","","","","","debug-card-mux",
+	/*P0-P7*/	"power-button","","reset-button","",
+			"led-power","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","power-host-control","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/	"","","","","","","","",
+	/*18B0-18B7*/	"","","","",
+				"FM_BOARD_BMC_REV_ID0","FM_BOARD_BMC_REV_ID1",
+				"FM_BOARD_BMC_REV_ID2","",
+	/*18C0-18C7*/	"SPI_BMC_BIOS_ROM_IRQ0_R_N","","","","","","","",
+	/*18D0-18D7*/	"","","","","","","","",
+	/*18E0-18E3*/	"FM_BMC_PROT_LS_EN","AC_PWR_BMC_BTN_R_N","","";
+};
+
+&i2c0 {
+	status = "okay";
+
+	// MB FRU
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <112 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names =
+			"FM_NIC_PPS_IN_OE_N","FM_NIC_PPS_OUT_OE_N",
+			"FM_CPU0_TRIGGERTSC_OE_N","FM_NIC_PPS_IN_MUX_OE_N",
+			"FM_CPU0_CORETYPE0","FM_CPU0_CORETYPE1",
+			"FM_CPU0_CORETYPE2","FM_NIC_PPS_OUT_MUX_OE",
+			"CLKMUX_INPUT_LOSS_U45_R_N","FM_CPU0_SP7R1",
+			"FM_CPU0_SP7R2","FM_CPU0_SP7R3",
+			"FM_CPU0_SP7R4","",
+			"FM_NIC_PPS_IN_S0_R","FM_NIC_PPS_IN_S1_R";
+	};
+
+	fan-controller@21 {
+		compatible = "maxim,max31790";
+		reg = <0x21>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9555";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <116 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names =
+			"FM_CBL_PRSNT_0A_N","FM_CBL_PRSNT_0B_N",
+			"FM_CBL_PRSNT_1A_N","FM_CBL_PRSNT_1B_N",
+			"FM_MODULE_PWRGD_0A","FM_MODULE_PWRGD_0B",
+			"CLKMUX_INPUT_LOSS_U88_R_N","FM_MODULE_PWRGD_1B",
+			"","",
+			"CLKMUX_INPUT_LOSS_U83_R_N","CLKMUX_INPUT_LOSS_U84_R_N",
+			"FM_P3V3_E1S_0_FAULT_R_N","FM_P3V3_E1S_1_FAULT_R_N",
+			"E1S_0_P12V_ADC_R_ALERT","E1S_1_P12V_ADC_R_ALERT";
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9555";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <114 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names =
+			"FM_CBL_PRSNT_2A_N","FM_CBL_PRSNT_2B_N",
+			"FM_CBL_PRSNT_3A_N","FM_CBL_PRSNT_3B_N",
+			"FM_CBL_PRSNT_4A_N","FM_CBL_PRSNT_4B_N",
+			"FM_P3V3_NIC_400G_FAULT_R_N","FM_MODULE_PWRGD_2B",
+			"OCP_SFF_P12V_ADC_R_ALERT","FM_MODULE_PWRGD_3B",
+			"FM_THERMAL_ALERT_R_N","FM_MODULE_PWRGD_4B",
+			"FM_CBL_PRSNT_OSFP_A_N","FM_CBL_PRSNT_OSFP_B_N",
+			"FM_JTAG_MCIO_MUX_S0","FM_JTAG_MCIO_MUX_S1";
+	};
+
+	gpio@26 {
+		compatible = "nxp,pca9555";
+		reg = <0x26>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <118 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names =
+			"FAN_0_PRSNT_R1_N","FAN_1_PRSNT_R1_N",
+			"FAN_2_PRSNT_R1_N","FAN_3_PRSNT_R1_N",
+			"P12V_FAN_0_ADC_ALERT","P12V_FAN_1_ADC_ALERT",
+			"P12V_FAN_2_ADC_ALERT","P12V_FAN_3_ADC_ALERT",
+			"P12V_FAN0_PWRGD_R","P12V_FAN1_PWRGD_R",
+			"P12V_FAN2_PWRGD_R","P12V_FAN3_PWRGD_R",
+			"","","","";
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	sbrmi@3c {
+		compatible = "amd,sbrmi";
+		reg = <0x3c>;
+	};
+
+	sbtsi@4c {
+		compatible = "amd,sbtsi";
+		reg = <0x4c>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c4mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			// HPM Board ID EEPROM
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			// SCM Board ID EEPROM
+			eeprom@53 {
+				compatible = "atmel,24c128";
+				reg = <0x53>;
+			};
+		};
+
+		i2c4mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-monitor@40 {
+				compatible = "ti,ina230";
+				reg = <0x40>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@42 {
+				compatible = "ti,ina230";
+				reg = <0x42>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina230";
+				reg = <0x44>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@46 {
+				compatible = "ti,ina230";
+				reg = <0x46>;
+				shunt-resistor = <2000>;
+			};
+
+			voltage-sensor@48 {
+				compatible = "ti,ads7830";
+				reg = <0x48>;
+				vref-supply = <&p3v3_bmc_aux>;
+			};
+
+			voltage-sensor@4a {
+				compatible = "ti,ads7830";
+				reg = <0x4a>;
+				vref-supply = <&p3v3_bmc_aux>;
+			};
+
+			temperature-sensor@4c {
+				compatible = "ti,tmp75";
+				reg = <0x4c>;
+			};
+
+			temperature-sensor@4e {
+				compatible = "ti,tmp75";
+				reg = <0x4e>;
+			};
+		};
+
+		i2c4mux0ch4: i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4mux0ch5: i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4mux0ch6: i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-monitor@40 {
+				compatible = "ti,ina230";
+				reg = <0x40>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@42 {
+				compatible = "ti,ina230";
+				reg = <0x42>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina230";
+				reg = <0x44>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@46 {
+				compatible = "ti,ina230";
+				reg = <0x46>;
+				shunt-resistor = <2000>;
+			};
+
+			voltage-sensor@48 {
+				compatible = "ti,ads7830";
+				reg = <0x48>;
+			};
+		};
+
+		i2c4mux0ch7: i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			temperature-sensor@4b {
+				compatible = "ti,tmp75";
+				reg = <0x4b>;
+			};
+
+			temperature-sensor@4f {
+				compatible = "ti,tmp75";
+				reg = <0x4f>;
+			};
+
+			// FIO FRU
+			eeprom@53 {
+				compatible = "atmel,24c512";
+				reg = <0x53>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	// E1S BP FRU
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c5mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c5mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c5mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c5mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9546";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c5mux1ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			voltage-sensor@48 {
+				compatible = "ti,ads7830";
+				reg = <0x48>;
+			};
+		};
+
+		i2c5mux1ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+		};
+
+		i2c5mux1ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-monitor@40 {
+				compatible = "ti,ina230";
+				reg = <0x40>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@41 {
+				compatible = "ti,ina230";
+				reg = <0x41>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina230";
+				reg = <0x44>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@45 {
+				compatible = "ti,ina230";
+				reg = <0x45>;
+				shunt-resistor = <2000>;
+			};
+		};
+
+		i2c5mux1ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio@74 {
+				compatible = "nxp,pca9539";
+				reg = <0x74>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names =
+					"P12V_E1S_ADC_ALERT","BUFF0_100M_LOSB_PLD",
+					"E1S_BP_SKU_ID0","E1S_BP_SKU_ID1",
+					"E1S_BP_SKU_ID2","E1S_BP_REV_ID0",
+					"E1S_BP_REV_ID1","E1S_BP_REV_ID2",
+					"P3V3_E1S_1_FAULT_R_N","P3V3_E1S_2_FAULT_R_N",
+					"P3V3_E1S_3_FAULT_R_N","P3V3_E1S_4_FAULT_R_N",
+					"P12V_E1S_1_FAULT_R_N","P12V_E1S_2_FAULT_R_N",
+					"P12V_E1S_3_FAULT_R_N","P12V_E1S_4_FAULT_R_N";
+			};
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	// Rainbow0 FRU
+	eeprom@52 {
+		compatible = "atmel,24c256";
+		reg = <0x52>;
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c6mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			temperature-sensor@64 {
+				compatible = "microchip,mcp9600";
+				reg = <0x64>;
+			};
+
+			temperature-sensor@65 {
+				compatible = "microchip,mcp9600";
+				reg = <0x65>;
+			};
+
+			temperature-sensor@67 {
+				compatible = "microchip,mcp9600";
+				reg = <0x67>;
+			};
+
+			i2c-mux@72 {
+				compatible = "nxp,pca9546";
+				reg = <0x72>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				i2c6mux1ch0: i2c@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				i2c6mux1ch1: i2c@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					voltage-sensor@48 {
+						compatible = "ti,ads7830";
+						reg = <0x48>;
+					};
+
+					voltage-sensor@49 {
+						compatible = "ti,ads7830";
+						reg = <0x49>;
+					};
+
+					temperature-sensor@4a {
+						compatible = "ti,tmp175";
+						reg = <0x4a>;
+					};
+
+					temperature-sensor@4b {
+						compatible = "ti,tmp175";
+						reg = <0x4b>;
+					};
+
+					eeprom@56 {
+						compatible = "atmel,24c256";
+						reg = <0x56>;
+					};
+				};
+
+				i2c6mux1ch2: i2c@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				i2c6mux1ch3: i2c@3 {
+					reg = <3>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+
+		i2c6mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			potentiometer@2c {
+				compatible = "adi,ad5272-020";
+				reg = <0x2c>;
+			};
+
+			potentiometer@2e {
+				compatible = "adi,ad5272-020";
+				reg = <0x2e>;
+			};
+
+			potentiometer@2f {
+				compatible = "adi,ad5272-020";
+				reg = <0x2f>;
+			};
+
+			power-monitor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c6mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			potentiometer@2c {
+				compatible = "adi,ad5272-020";
+				reg = <0x2c>;
+			};
+
+			potentiometer@2e {
+				compatible = "adi,ad5272-020";
+				reg = <0x2e>;
+			};
+
+			potentiometer@2f {
+				compatible = "adi,ad5272-020";
+				reg = <0x2f>;
+			};
+
+			power-monitor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c6mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			voltage-sensor@1d {
+				compatible = "ti,adc128d818";
+				reg = <0x1d>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
+			voltage-sensor@37 {
+				compatible = "ti,adc128d818";
+				reg = <0x37>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
+			power-monitor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp175";
+				reg = <0x48>;
+			};
+
+			temperature-sensor@49 {
+				compatible = "ti,tmp175";
+				reg = <0x49>;
+			};
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+
+	// Rainbow2 FRU
+	eeprom@52 {
+		compatible = "atmel,24c256";
+		reg = <0x52>;
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c8mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			temperature-sensor@64 {
+				compatible = "microchip,mcp9600";
+				reg = <0x64>;
+			};
+
+			temperature-sensor@65 {
+				compatible = "microchip,mcp9600";
+				reg = <0x65>;
+			};
+
+			temperature-sensor@67 {
+				compatible = "microchip,mcp9600";
+				reg = <0x67>;
+			};
+
+			i2c-mux@72 {
+				compatible = "nxp,pca9546";
+				reg = <0x72>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				i2c8mux1ch0: i2c@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				i2c8mux1ch1: i2c@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					voltage-sensor@48 {
+						compatible = "ti,ads7830";
+						reg = <0x48>;
+					};
+
+					voltage-sensor@49 {
+						compatible = "ti,ads7830";
+						reg = <0x49>;
+					};
+
+					temperature-sensor@4a {
+						compatible = "ti,tmp175";
+						reg = <0x4a>;
+					};
+
+					temperature-sensor@4b {
+						compatible = "ti,tmp175";
+						reg = <0x4b>;
+					};
+
+					eeprom@56 {
+						compatible = "atmel,24c256";
+						reg = <0x56>;
+					};
+				};
+
+				i2c8mux1ch2: i2c@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				i2c8mux1ch3: i2c@3 {
+					reg = <3>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+
+		i2c8mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			potentiometer@2c {
+				compatible = "adi,ad5272-020";
+				reg = <0x2c>;
+			};
+
+			potentiometer@2e {
+				compatible = "adi,ad5272-020";
+				reg = <0x2e>;
+			};
+
+			potentiometer@2f {
+				compatible = "adi,ad5272-020";
+				reg = <0x2f>;
+			};
+
+			power-monitor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c8mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			potentiometer@2c {
+				compatible = "adi,ad5272-020";
+				reg = <0x2c>;
+			};
+
+			potentiometer@2e {
+				compatible = "adi,ad5272-020";
+				reg = <0x2e>;
+			};
+
+			potentiometer@2f {
+				compatible = "adi,ad5272-020";
+				reg = <0x2f>;
+			};
+
+			power-monitor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c8mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			voltage-sensor@1d {
+				compatible = "ti,adc128d818";
+				reg = <0x1d>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
+			voltage-sensor@37 {
+				compatible = "ti,adc128d818";
+				reg = <0x37>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
+			power-monitor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp175";
+				reg = <0x48>;
+			};
+
+			temperature-sensor@49 {
+				compatible = "ti,tmp175";
+				reg = <0x49>;
+			};
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	temperature-sensor@4b {
+		compatible = "ti,tmp75";
+		reg = <0x4b>;
+	};
+
+	// SCM FRU
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	// BSM FRU
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+
+	// Rainbow3 FRU
+	eeprom@52 {
+		compatible = "atmel,24c256";
+		reg = <0x52>;
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c10mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			temperature-sensor@64 {
+				compatible = "microchip,mcp9600";
+				reg = <0x64>;
+			};
+
+			temperature-sensor@65 {
+				compatible = "microchip,mcp9600";
+				reg = <0x65>;
+			};
+
+			temperature-sensor@67 {
+				compatible = "microchip,mcp9600";
+				reg = <0x67>;
+			};
+
+			i2c-mux@72 {
+				compatible = "nxp,pca9546";
+				reg = <0x72>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				i2c10mux1ch0: i2c@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				i2c10mux1ch1: i2c@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					voltage-sensor@48 {
+						compatible = "ti,ads7830";
+						reg = <0x48>;
+					};
+
+					voltage-sensor@49 {
+						compatible = "ti,ads7830";
+						reg = <0x49>;
+					};
+
+					temperature-sensor@4a {
+						compatible = "ti,tmp175";
+						reg = <0x4a>;
+					};
+
+					temperature-sensor@4b {
+						compatible = "ti,tmp175";
+						reg = <0x4b>;
+					};
+
+					eeprom@56 {
+						compatible = "atmel,24c256";
+						reg = <0x56>;
+					};
+				};
+
+				i2c10mux1ch2: i2c@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				i2c10mux1ch3: i2c@3 {
+					reg = <3>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+
+		i2c10mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			potentiometer@2c {
+				compatible = "adi,ad5272-020";
+				reg = <0x2c>;
+			};
+
+			potentiometer@2e {
+				compatible = "adi,ad5272-020";
+				reg = <0x2e>;
+			};
+
+			potentiometer@2f {
+				compatible = "adi,ad5272-020";
+				reg = <0x2f>;
+			};
+
+			power-monitor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c10mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			potentiometer@2c {
+				compatible = "adi,ad5272-020";
+				reg = <0x2c>;
+			};
+
+			potentiometer@2e {
+				compatible = "adi,ad5272-020";
+				reg = <0x2e>;
+			};
+
+			potentiometer@2f {
+				compatible = "adi,ad5272-020";
+				reg = <0x2f>;
+			};
+
+			power-monitor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c10mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			voltage-sensor@1d {
+				compatible = "ti,adc128d818";
+				reg = <0x1d>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
+			voltage-sensor@37 {
+				compatible = "ti,adc128d818";
+				reg = <0x37>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
+			power-monitor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp175";
+				reg = <0x48>;
+			};
+
+			temperature-sensor@49 {
+				compatible = "ti,tmp175";
+				reg = <0x49>;
+			};
+		};
+	};
+};
+
+&i2c11 {
+	multi-master;
+	mctp-controller;
+	status = "okay";
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	// OCP NIC TEMP
+	temperature-sensor@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+
+	// OCP NIC FRU
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	// SWB FRU
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9548";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c12mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+		};
+
+		i2c12mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-monitor@42 {
+				compatible = "mps,mp2971";
+				reg = <0x42>;
+			};
+
+			power-monitor@43 {
+				compatible = "mps,mp2971";
+				reg = <0x43>;
+			};
+		};
+
+		i2c12mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-monitor@40 {
+				compatible = "ti,ina230";
+				reg = <0x40>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@41 {
+				compatible = "ti,ina230";
+				reg = <0x41>;
+				shunt-resistor = <2000>;
+			};
+		};
+
+		i2c12mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-monitor@44 {
+				compatible = "ti,ina230";
+				reg = <0x44>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@45 {
+				compatible = "ti,ina230";
+				reg = <0x45>;
+				shunt-resistor = <2000>;
+			};
+		};
+
+		i2c12mux0ch4: i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			voltage-sensor@49 {
+				compatible = "ti,ads7830";
+				reg = <0x49>;
+			};
+		};
+
+		i2c12mux0ch5: i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c12mux0ch6: i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c12mux0ch7: i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	// Rainbow1 FRU
+	eeprom@52 {
+		compatible = "atmel,24c256";
+		reg = <0x52>;
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c13mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			temperature-sensor@64 {
+				compatible = "microchip,mcp9600";
+				reg = <0x64>;
+			};
+
+			temperature-sensor@65 {
+				compatible = "microchip,mcp9600";
+				reg = <0x65>;
+			};
+
+			temperature-sensor@67 {
+				compatible = "microchip,mcp9600";
+				reg = <0x67>;
+			};
+
+			i2c-mux@72 {
+				compatible = "nxp,pca9546";
+				reg = <0x72>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				i2c13mux1ch0: i2c@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				i2c13mux1ch1: i2c@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					voltage-sensor@48 {
+						compatible = "ti,ads7830";
+						reg = <0x48>;
+					};
+
+					voltage-sensor@49 {
+						compatible = "ti,ads7830";
+						reg = <0x49>;
+					};
+
+					temperature-sensor@4a {
+						compatible = "ti,tmp175";
+						reg = <0x4a>;
+					};
+
+					temperature-sensor@4b {
+						compatible = "ti,tmp175";
+						reg = <0x4b>;
+					};
+
+					eeprom@56 {
+						compatible = "atmel,24c256";
+						reg = <0x56>;
+					};
+				};
+
+				i2c13mux1ch2: i2c@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				i2c13mux1ch3: i2c@3 {
+					reg = <3>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+
+		i2c13mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			potentiometer@2c {
+				compatible = "adi,ad5272-020";
+				reg = <0x2c>;
+			};
+
+			potentiometer@2e {
+				compatible = "adi,ad5272-020";
+				reg = <0x2e>;
+			};
+
+			potentiometer@2f {
+				compatible = "adi,ad5272-020";
+				reg = <0x2f>;
+			};
+
+			power-monitor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c13mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			potentiometer@2c {
+				compatible = "adi,ad5272-020";
+				reg = <0x2c>;
+			};
+
+			potentiometer@2e {
+				compatible = "adi,ad5272-020";
+				reg = <0x2e>;
+			};
+
+			potentiometer@2f {
+				compatible = "adi,ad5272-020";
+				reg = <0x2f>;
+			};
+
+			power-monitor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c13mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			voltage-sensor@1d {
+				compatible = "ti,adc128d818";
+				reg = <0x1d>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
+			voltage-sensor@37 {
+				compatible = "ti,adc128d818";
+				reg = <0x37>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
+			power-monitor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-monitor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp175";
+				reg = <0x48>;
+			};
+
+			temperature-sensor@49 {
+				compatible = "ti,tmp175";
+				reg = <0x49>;
+			};
+		};
+	};
+};
+
+&i2c14 {
+	status = "okay";
+};
+
+&i2c15 {
+	status = "okay";
+};
+
+&kcs2 {
+	aspeed,lpc-io-reg = <0xca8>;
+	status = "okay";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xca2>;
+	status = "okay";
+};
+
+&mac2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	use-ncsi;
+	status = "okay";
+};
+
+&mac3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	use-ncsi;
+	status = "okay";
+};
+
+&sgpiom0 {
+	ngpios = <128>;
+	bus-frequency = <2000000>;
+	gpio-line-names =
+	/*in - out - in - out */
+	/*A0-A3 line 0-7*/
+	"PDB1_HSC_PWR_OK","power-chassis-control",
+	"PDB2_HSC_PWR_OK","FM_MODULE_PWRGD_0A_OUT",
+	"PWRGD_P12V_MEM","FM_MODULE_PWRGD_0B_OUT",
+	"PWRGD_P12V_SCM","FM_MODULE_PWRGD_1B_OUT",
+	/*A4-A7 line 8-15*/
+	"PWRGD_P12V_FAN","FM_MODULE_PWRGD_2B_OUT",
+	"PWRGD_P5V_AUX","FM_MODULE_PWRGD_3B_OUT",
+	"power-chassis-good","FM_MODULE_PWRGD_4B_OUT",
+	"PWRGD_P1V8_LDO","FM_CBL_PRSNT_0A_N_OUT",
+	/*B0-B3 line 16-23*/
+	"PWRGD_P1V_LDO","FM_CBL_PRSNT_0B_N_OUT",
+	"PWRGD_PVDD33_S5","FM_CBL_PRSNT_1A_N_OUT",
+	"PWRGD_PVDD18_S5_P0","FM_CBL_PRSNT_1B_N_OUT",
+	"CPU0_SLP_S5_N","FM_CBL_PRSNT_2A_N_OUT",
+	/*B4-B7 line 24-31*/
+	"PWRGD_PVDDIO_MEM_S3_P0","FM_CBL_PRSNT_2B_N_OUT",
+	"CPU0_SLP_S3_N","FM_CBL_PRSNT_3A_N_OUT",
+	"FM_MODULE_PWRGD_1B","FM_CBL_PRSNT_3B_N_OUT",
+	"FM_MODULE_PWRGD_2B","FM_CBL_PRSNT_4A_N_OUT",
+	/*C0-C3 line 32-39*/
+	"FM_MODULE_PWRGD_3B","FM_CBL_PRSNT_4B_N_OUT",
+	"FM_MODULE_PWRGD_4B","P12V_FAN0_PWRGD_OUT",
+	"FM_MODULE_PWRGD_0B","P12V_FAN1_PWRGD_OUT",
+	"PWRGD_PVDDIO_P0","P12V_FAN2_PWRGD_OUT",
+	/*C4-C7 line 40-47*/
+	"PWRGD_PVDDCR_SOC_P0","P12V_FAN3_PWRGD_OUT",
+	"PWRGD_PVDDCR_CPU0_P0","P12V_FAN4_PWRGD_OUT",
+	"PWRGD_PVDDCR_CPU1_P0","P12V_FAN5_PWRGD_OUT",
+	"FM_CPU0_PWR_GOOD","P12V_FAN6_PWRGD_OUT",
+	/*D0-D3 line 48-55*/
+	"host0-ready","P12V_FAN7_PWRGD_OUT",
+	"FM_PWRGD_CPU0_PWROK","FAN_0_PRSNT_R1_N_OUT",
+	"FM_RST_CPU0_RESETL_N","FAN_1_PRSNT_R1_N_OUT",
+	"RST_CPU0_PERST0_R_N","FAN_2_PRSNT_R1_N_OUT",
+	/*D4-D7 line 56-63*/
+	"RST_CPU0_PERST1_R_N","FAN_3_PRSNT_R1_N_OUT",
+	"BIOS_POST_CMPLT","FAN_4_PRSNT_R1_N_OUT",
+	"","FAN_5_PRSNT_R1_N_OUT",
+	"","FAN_6_PRSNT_R1_N_OUT",
+	/*E0-E3 line 64-71*/
+	"FM_PWRGD_CHAD_CPU0","FAN_7_PRSNT_R1_N_OUT",
+	"FM_PWRGD_CHEH_CPU0","TRAY_SLOT_ID0_OUT",
+	"FM_PWRGD_CHIL_CPU0","TRAY_SLOT_ID1_OUT",
+	"FM_PWRGD_CHMP_CPU0","TRAY_SLOT_ID2_OUT",
+	/*E4-E7 line 72-79*/
+	"P12V_E1S_0_PWRGD","TRAY_SLOT_ID3_OUT",
+	"P12V_E1S_1_PWRGD","TRAY_SLOT_ID4_OUT",
+	"P3V3_E1S_0_PWRGD","SCM_JTAG_MUX_S0_R",
+	"P3V3_E1S_1_PWRGD","SCM_JTAG_MUX_S1_R",
+	/*F0-F3 line 80-87*/
+	"FM_MODULE_PWRGD_0A","BMC_SGPIO_READY",
+	"OCP_V3_1_P3V3_PLD_R_PWRGD","CPU0_SYS_RESET_N",
+	"P12V_OCP_V3_1_PLD_PWRGD","RST_CPU0_KBRST_N",
+	"PWRGD_OCP_SFF_PWR_GOOD","BIOS_DEBUG_MODE",
+	/*F4-F7 line 88-95*/
+	"","CLR_CMOS",
+	"","I3C_SPD_MUX_FORCE_SEL",
+	"","FM_JTAG_HOST_SEL",
+	"","TRAY_PRESENT_N",
+	/*G0-G3 line 96-103*/
+	"MB_REV_ID_0","UART_BMC_SEL0",
+	"MB_REV_ID_1","UART_BMC_SEL1",
+	"MB_REV_ID_2","SCM_USB_SEL",
+	"MB_SKU_ID_0","FORCE_ALL_PWRON",
+	/*G4-G7 line 104-111*/
+	"MB_SKU_ID_1","PASSWORD_CLEAR",
+	"MB_SKU_ID_2","",
+	"MB_SKU_ID_3","",
+	"","BIOS_DEBUG_MODE",
+	/*H0-H3 line 112-119*/
+	"FM_IOEXP_U538_INT_N","",
+	"FM_IOEXP_U539_INT_N","",
+	"FM_IOEXP_U540_INT_N","",
+	"FM_IOEXP_U541_INT_N","",
+	/*H4-H7 line 120-127*/
+	"FM_IOEXP_PDB2_U1003_INT_N","",
+	"","",
+	"","",
+	"FM_MAIN_PWREN_RMC_EN_ISO_R","",
+	/*I0-I3 line 128-135*/
+	"","","","",
+	"PDB_IRQ_PMBUS_ALERT_ISO_R_N","",
+	"PDB_UV_ALERT_ISO_R_N","",
+	/*I4-I7 line 136-143*/
+	"P12V_SCM_ADC_ALERT","",
+	"CPU0_REGS_I2C_ALERT_N","",
+	"FM_RTC_ALERT_N","",
+	"P0_I3C_APML_ALERT_L","",
+	/*J0-J3 line 144-151*/
+	"SMB_RJ45_FIO_TMP_ALERT","",
+	"FM_SMB_ALERT_MCIO_0A_N","",
+	"I3C_MCIO_0B_ALERT_ISO_R_N","",
+	"FM_SMB_ALERT_MCIO_1A_N","",
+	/*J4-J7 line 152-159*/
+	"I3C_MCIO_1B_ALERT_ISO_R_N","",
+	"FM_SMB_ALERT_MCIO_2A_N","",
+	"I3C_MCIO_2B_ALERT_ISO_R_N","",
+	"FM_SMB_ALERT_MCIO_3A_N","",
+	/*K0-K3 line 160-167*/
+	"I3C_MCIO_3B_ALERT_ISO_R_N","",
+	"FM_SMB_ALERT_MCIO_4A_N","",
+	"I3C_MCIO_4B_ALERT_ISO_R_N","",
+	"","",
+	/*K4-K7 line 168-175*/
+	"","","","","","","","",
+	/*L0-L3 line 176-183*/
+	"FM_CPU0_THERMTRIP_N","",
+	"FM_CPU0_PROCHOT_N","",
+	"FM_CPU0_SMERR_N","",
+	"FM_PVDDCR_CPU0_P0_OCP_N","",
+	/*L4-L7 line 184-191*/
+	"FM_PVDDCR_CPU1_P0_OCP_N","",
+	"FM_PVDDCR_SOC_P0_OCP_N","",
+	"FM_OCP_PWRBRK_R_N","",
+	"PMIC_ERROR_N","",
+	/*M0-M3 line 192-199*/
+	"","","","","","","","",
+	/*M4-M7 line 200-207*/
+	"","","","","","","","",
+	/*N0-N3 line 208-215*/
+	"FM_PRSNT_CPU0_N","",
+	"OCP_SFF_PRSNT_N","",
+	"E1S_0_PRSNT_R_N","",
+	"E1S_BP_0_PRSNT_R_N","",
+	/*N4-N7 line 216-223*/
+	"E1S_BP_1_PRSNT_R_N","",
+	"E1S_BP_2_PRSNT_R_N","",
+	"E1S_BP_3_PRSNT_R_N","",
+	"PDB_PRSNT_J311_N","",
+	/*O0-O3 line 224-231*/
+	"PDB_PRSNT_J312_N","",
+	"PDB_PRSNT_J313_N","",
+	"PDB_PRSNT_J314_N","",
+	"PRSNT_RJ45_FIO_N_R","",
+	/*O4-O7 line 232-239*/
+	"PRSNT_LEAK_CABLE_1_R_N","",
+	"PRSNT_LEAK_CABLE_2_R_N","",
+	"PRSNT_HDT_N","",
+	"LEAK_SWB_COLDPLATE","",
+	/*P0-P3 line 240-247*/
+	"LEAK_R3_COLDPLATE","",
+	"LEAK_R2_COLDPLATE","",
+	"LEAK_R1_COLDPLATE","",
+	"LEAK_R0_COLDPLATE","",
+	/*P4-P7 line 248-255*/
+	"LEAK_MB_COLDPLATE","",
+	"LEAK_PDB1_RIGHT_MANIFOLD","",
+	"LEAK_PDB1_LEFT_MANIFOLD","",
+	"LEAK_MB_MANIFOLD","";
+	status = "okay";
+};
+
+// BIOS Flash
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2_default>;
+	status = "okay";
+
+	flash@0 {
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <12000000>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+		status = "okay";
+	};
+};
+
+// HOST BIOS Debug
+&uart1 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+// BMC Debug Console
+&uart5 {
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&wdt1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-tiogapass.dts
index b6b16356f571..5d4c7d979f1e 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-tiogapass.dts
@@ -211,7 +211,7 @@
 &i2c1 {
 	status = "okay";
 	//X24 Riser
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9544";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -243,7 +243,7 @@
 				pagesize = <32>;
 			};
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9546";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -303,7 +303,7 @@
 				pagesize = <32>;
 			};
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9546";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -363,7 +363,7 @@
 				pagesize = <32>;
 			};
 
-			i2c-switch@73 {
+			i2c-mux@73 {
 				compatible = "nxp,pca9546";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -508,7 +508,7 @@
 	status = "okay";
 	//HSC, AirMax Conn A
 	adm1278@45 {
-		compatible = "adm1275";
+		compatible = "adi,adm1275";
 		reg = <0x45>;
 		shunt-resistor-micro-ohms = <250>;
 	};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge100.dts
index 584efa528450..97cd11c3d9a5 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge100.dts
@@ -44,7 +44,7 @@
 };
 
 &i2c7 {
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge40.dts
index 6624855d8ebd..6624855d8ebd 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge40.dts
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400-data64.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400-data64.dts
new file mode 100644
index 000000000000..1d46eaee8656
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400-data64.dts
@@ -0,0 +1,375 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2019 Facebook Inc.
+/dts-v1/;
+
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include "ast2500-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Wedge 400 BMC (64MB Datastore)";
+	compatible = "facebook,wedge400-data64-bmc", "aspeed,ast2500";
+
+	aliases {
+		/*
+		 * PCA9548 (2-0070) provides 8 channels connecting to
+		 * SCM (System Controller Module).
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+
+		/*
+		 * PCA9548 (8-0070) provides 8 channels connecting to
+		 * SMB (Switch Main Board).
+		 */
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+
+		/*
+		 * PCA9548 (11-0076) provides 8 channels connecting to
+		 * FCM (Fan Controller Module).
+		 */
+		i2c32 = &imux32;
+		i2c33 = &imux33;
+		i2c34 = &imux34;
+		i2c35 = &imux35;
+		i2c36 = &imux36;
+		i2c37 = &imux37;
+		i2c38 = &imux38;
+		i2c39 = &imux39;
+
+		spi2 = &spi_gpio;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	ast-adc-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+			      <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>;
+	};
+
+	/*
+	 * GPIO-based SPI Master is required to access SPI TPM, because
+	 * full-duplex SPI transactions are not supported by ASPEED SPI
+	 * Controllers.
+	 */
+	spi_gpio: spi {
+		status = "okay";
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cs-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_LOW>;
+		sck-gpios = <&gpio ASPEED_GPIO(R, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+};
+
+/*
+ * Both firmware flashes are 128MB on Wedge400 BMC.
+ */
+&fmc_flash0 {
+#include "facebook-bmc-flash-layout-128-data64.dtsi"
+};
+
+&fmc_flash1 {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		flash1@0 {
+			reg = <0x0 0x8000000>;
+			label = "flash1";
+		};
+	};
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+		     &pinctrl_rxd2_default>;
+};
+
+&uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd4_default
+		     &pinctrl_rxd4_default>;
+};
+
+/*
+ * I2C bus #0 is multi-master environment dedicated for BMC and Bridge IC
+ * communication.
+ */
+&i2c0 {
+	status = "okay";
+	multi-master;
+	bus-frequency = <1000000>;
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux28: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux29: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux30: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux31: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	i2c-mux@76 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x76>;
+		i2c-mux-idle-disconnect;
+
+		imux32: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux33: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux34: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux35: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux36: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux37: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux38: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux39: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&sdhci1 {
+	max-frequency = <25000000>;
+	/*
+	 * DMA mode needs to be disabled to avoid conflicts with UHCI
+	 * Controller in AST2500 SoC.
+	 */
+	sdhci-caps-mask = <0x0 0x580000>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
new file mode 100644
index 000000000000..ef0cfc51cda4
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2019 Facebook Inc.
+
+#include "aspeed-bmc-facebook-wedge400-data64.dts"
+
+/ {
+	model = "Facebook Wedge 400 BMC";
+	compatible = "facebook,wedge400-bmc", "aspeed,ast2500";
+};
+
+&fmc_flash0 {
+	/delete-node/partitions;
+#include "facebook-bmc-flash-layout-128.dtsi"
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yamp.dts
index 5e6105874217..98fe0d6c8188 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yamp.dts
@@ -57,7 +57,7 @@
 &i2c2 {
 	status = "okay";
 
-	i2c-switch@75 {
+	i2c-mux@75 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
new file mode 100644
index 000000000000..e4172be84e7f
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -0,0 +1,1398 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2022 Facebook Inc.
+
+/dts-v1/;
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Yosemite 4 BMC";
+	compatible = "facebook,yosemite4-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+		serial5 = &uart6;
+		serial6 = &uart7;
+		serial7 = &uart8;
+		serial8 = &uart9;
+
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+		i2c32 = &imux32;
+		i2c33 = &imux33;
+		i2c34 = &imux34;
+		i2c35 = &imux35;
+	};
+
+	chosen {
+		stdout-path = "serial4:57600n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		ramoops@b8dfa000 {
+			compatible = "ramoops";
+			reg = <0xb8dfa000 0x6000>;
+			record-size = <0x2000>;
+			console-size = <0x2000>;
+			pmsg-size = <0x2000>;
+			max-reason = <1>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+				<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+				<&adc1 0>, <&adc1 1>, <&adc1 7>;
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 ASPEED_GPIO(X, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			reg = <0>;
+			spi-max-frequency = <33000000>;
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&uart6 {
+	status = "okay";
+};
+
+&uart7 {
+	status = "okay";
+};
+
+&uart8 {
+	status = "okay";
+};
+
+&uart9 {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+};
+
+&wdt2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst2_default>;
+	aspeed,reset-type = "system";
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	use-ncsi;
+	mellanox,multi-host;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	use-ncsi;
+	mellanox,multi-host;
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "SLOT1_UART_SEL0","SLOT1_UART_SEL1",
+				"SLOT1_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9506";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1281";
+		reg = <0x40>;
+		shunt-resistor-micro-ohms = <500>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "SLOT2_UART_SEL0","SLOT2_UART_SEL1",
+				"SLOT2_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9506";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1281";
+		reg = <0x40>;
+		shunt-resistor-micro-ohms = <500>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "SLOT3_UART_SEL0","SLOT3_UART_SEL1",
+				"SLOT3_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9506";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1281";
+		reg = <0x40>;
+		shunt-resistor-micro-ohms = <500>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "SLOT4_UART_SEL0","SLOT4_UART_SEL1",
+				"SLOT4_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9506";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1281";
+		reg = <0x40>;
+		shunt-resistor-micro-ohms = <500>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "SLOT5_UART_SEL0","SLOT5_UART_SEL1",
+				"SLOT5_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9506";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1281";
+		reg = <0x40>;
+		shunt-resistor-micro-ohms = <500>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "SLOT6_UART_SEL0","SLOT6_UART_SEL1",
+				"SLOT6_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9506";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1281";
+		reg = <0x40>;
+		shunt-resistor-micro-ohms = <500>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "SLOT7_UART_SEL0","SLOT7_UART_SEL1",
+				"SLOT7_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9506";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1281";
+		reg = <0x40>;
+		shunt-resistor-micro-ohms = <500>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "SLOT8_UART_SEL0","SLOT8_UART_SEL1",
+				"SLOT8_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9506";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1281";
+		reg = <0x40>;
+		shunt-resistor-micro-ohms = <500>;
+	};
+};
+
+&i2c8 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+	bus-frequency = <400000>;
+	i2c-mux@70 {
+		compatible = "nxp,pca9544";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		imux16: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+
+		imux17: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+
+		imux18: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+
+		imux19: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+	};
+};
+
+&i2c9 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+	bus-frequency = <400000>;
+	i2c-mux@71 {
+		compatible = "nxp,pca9544";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		imux20: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+
+		imux21: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+
+		imux22: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+
+		imux23: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+	};
+};
+
+&i2c10 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+	bus-frequency = <400000>;
+	i2c-mux@74 {
+		compatible = "nxp,pca9544";
+		reg = <0x74>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		imux28: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio@20 {
+				compatible = "nxp,pca9506";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio@21 {
+				compatible = "nxp,pca9506";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio@22 {
+				compatible = "nxp,pca9506";
+				reg = <0x22>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio@23 {
+				compatible = "nxp,pca9506";
+				reg = <0x23>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio@24 {
+				compatible = "nxp,pca9506";
+				reg = <0x24>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names = "","","","",
+						  "NIC0_MAIN_PWR_EN",
+						  "NIC1_MAIN_PWR_EN",
+						  "NIC2_MAIN_PWR_EN",
+						  "NIC3_MAIN_PWR_EN",
+						  "","","","","","","","",
+						  "","","","","","","","",
+						  "","","","","","","","";
+			};
+		};
+
+		imux29: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c11 {
+	status = "okay";
+	power-sensor@10 {
+		compatible = "adi,adm1272";
+		reg = <0x10>;
+	};
+
+	power-sensor@12 {
+		compatible = "adi,adm1272";
+		reg = <0x12>;
+	};
+
+	gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names = "P48V_OCP_GPIO1", "P48V_OCP_GPIO2",
+				  "P48V_OCP_GPIO3", "FAN_BOARD_0_REVISION_0_R",
+				  "FAN_BOARD_0_REVISION_1_R",
+				  "FAN_BOARD_1_REVISION_0_R",
+				  "FAN_BOARD_1_REVISION_1_R", "RST_MUX_R_N",
+				  "RST_LED_CONTROL_FAN_BOARD_0_N",
+				  "RST_LED_CONTROL_FAN_BOARD_1_N",
+				  "RST_IOEXP_FAN_BOARD_0_N",
+				  "RST_IOEXP_FAN_BOARD_1_N",
+				  "PWRGD_LOAD_SWITCH_FAN_BOARD_0_R",
+				  "PWRGD_LOAD_SWITCH_FAN_BOARD_1_R",
+				  "", "";
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names = "HSC_OCP_SLOT_ODD_GPIO1",
+				  "HSC_OCP_SLOT_ODD_GPIO2",
+				  "HSC_OCP_SLOT_ODD_GPIO3",
+				  "HSC_OCP_SLOT_EVEN_GPIO1",
+				  "HSC_OCP_SLOT_EVEN_GPIO2",
+				  "HSC_OCP_SLOT_EVEN_GPIO3",
+				  "ADC_TYPE_0_R", "ADC_TYPE_1_R",
+				  "MEDUSA_BOARD_REV_0", "MEDUSA_BOARD_REV_1",
+				  "MEDUSA_BOARD_REV_2", "MEDUSA_BOARD_TYPE",
+				  "DELTA_MODULE_TYPE", "P12V_HSC_TYPE",
+				  "", "";
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9555";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names = "CARD_TYPE_SLOT1", "CARD_TYPE_SLOT2",
+				  "CARD_TYPE_SLOT3", "CARD_TYPE_SLOT4",
+				  "CARD_TYPE_SLOT5", "CARD_TYPE_SLOT6",
+				  "CARD_TYPE_SLOT7", "CARD_TYPE_SLOT8",
+				  "OC_P48V_HSC_0_N", "FLT_P48V_HSC_0_N",
+				  "OC_P48V_HSC_1_N", "FLT_P48V_HSC_1_N",
+				  "EN_P48V_AUX_0", "EN_P48V_AUX_1",
+				  "PWRGD_P12V_AUX_0", "PWRGD_P12V_AUX_1";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names = "HSC1_ALERT1_R_N", "HSC2_ALERT1_R_N",
+				  "HSC3_ALERT1_R_N", "HSC4_ALERT1_R_N",
+				  "HSC5_ALERT1_R_N", "HSC6_ALERT1_R_N",
+				  "HSC7_ALERT1_R_N", "HSC8_ALERT1_R_N",
+				  "HSC1_ALERT2_R_N", "HSC2_ALERT2_R_N",
+				  "HSC3_ALERT2_R_N", "HSC4_ALERT2_R_N",
+				  "HSC5_ALERT2_R_N", "HSC6_ALERT2_R_N",
+				  "HSC7_ALERT2_R_N", "HSC8_ALERT2_R_N";
+	};
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp75";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp75";
+		reg = <0x49>;
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c128";
+		reg = <0x54>;
+	};
+};
+
+&i2c12 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+	bus-frequency = <400000>;
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9544";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		imux34: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c64";
+				reg = <0x54>;
+			};
+
+			rtc@6f {
+				compatible = "nuvoton,nct3018y";
+				reg = <0x6f>;
+			};
+
+			gpio@20 {
+				compatible = "nxp,pca9506";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio@21 {
+				compatible = "nxp,pca9506";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio@22 {
+				compatible = "nxp,pca9506";
+				reg = <0x22>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio@23 {
+				compatible = "nxp,pca9506";
+				reg = <0x23>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+
+		imux35: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c13 {
+	status = "okay";
+	bus-frequency = <100000>;
+	multi-master;
+
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c14 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+	bus-frequency = <400000>;
+	adc@1d {
+		compatible = "ti,adc128d818";
+		reg = <0x1d>;
+		ti,mode = /bits/ 8 <1>;
+	};
+
+	adc@36 {
+		compatible = "ti,adc128d818";
+		reg = <0x36>;
+		ti,mode = /bits/ 8 <1>;
+	};
+
+	adc@37 {
+		compatible = "ti,adc128d818";
+		reg = <0x37>;
+		ti,mode = /bits/ 8 <1>;
+	};
+
+	power-sensor@40 {
+		compatible = "ti,ina230";
+		reg = <0x40>;
+	};
+
+	power-sensor@41 {
+		compatible = "ti,ina230";
+		reg = <0x41>;
+	};
+
+	power-sensor@42 {
+		compatible = "ti,ina230";
+		reg = <0x42>;
+	};
+
+	power-sensor@43 {
+		compatible = "ti,ina230";
+		reg = <0x43>;
+	};
+
+	power-sensor@44 {
+		compatible = "ti,ina230";
+		reg = <0x44>;
+	};
+
+	temperature-sensor@4e {
+		compatible = "ti,tmp75";
+		reg = <0x4e>;
+	};
+
+	temperature-sensor@4f {
+		compatible = "ti,tmp75";
+		reg = <0x4f>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	i2c-mux@73 {
+		compatible = "nxp,pca9544";
+		reg = <0x73>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		imux32: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			adc@35 {
+				compatible = "maxim,max11617";
+				reg = <0x35>;
+			};
+		};
+
+		imux33: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			adc@35 {
+				compatible = "maxim,max11617";
+				reg = <0x35>;
+			};
+		};
+	};
+
+	i2c-mux@74 {
+		compatible = "nxp,pca9546";
+		reg = <0x74>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		imux30: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			adc@1f {
+				compatible = "ti,adc128d818";
+				reg = <0x1f>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
+			pwm@20 {
+				compatible = "maxim,max31790";
+				reg = <0x20>;
+			};
+
+			gpio@22 {
+				compatible = "ti,tca6424";
+				reg = <0x22>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			pwm@2f {
+				compatible = "maxim,max31790";
+				reg = <0x2f>;
+			};
+
+			adc@33 {
+				compatible = "maxim,max11615";
+				reg = <0x33>;
+			};
+
+			eeprom@52 {
+				compatible = "atmel,24c128";
+				reg = <0x52>;
+			};
+
+			gpio@61 {
+				compatible = "nxp,pca9552";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+
+		imux31: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			adc@1f {
+				compatible = "ti,adc128d818";
+				reg = <0x1f>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
+			pwm@20 {
+				compatible = "maxim,max31790";
+				reg = <0x20>;
+			};
+
+			gpio@22 {
+				compatible = "ti,tca6424";
+				reg = <0x22>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			pwm@2f {
+				compatible = "maxim,max31790";
+				reg = <0x2f>;
+			};
+
+			adc@33 {
+				compatible = "maxim,max11615";
+				reg = <0x33>;
+			};
+
+			eeprom@52 {
+				compatible = "atmel,24c128";
+				reg = <0x52>;
+			};
+
+			gpio@61 {
+				compatible = "nxp,pca9552";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+	};
+};
+
+&i2c15 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+	multi-master;
+	bus-frequency = <400000>;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9544";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux24: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			mctp-controller;
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux25: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			mctp-controller;
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux26: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			mctp-controller;
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux27: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			mctp-controller;
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+&adc0 {
+	status = "okay";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+			&pinctrl_adc2_default &pinctrl_adc3_default
+			&pinctrl_adc4_default &pinctrl_adc5_default
+			&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	status = "okay";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+			&pinctrl_adc15_default>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts
new file mode 100644
index 000000000000..2486981f3d6b
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts
@@ -0,0 +1,1067 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2025 Facebook Inc.
+
+/dts-v1/;
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Yosemite 5 BMC";
+	compatible = "facebook,yosemite5-bmc", "aspeed,ast2600";
+
+	aliases {
+		i2c16 = &i2c5mux0ch0;
+		i2c17 = &i2c5mux0ch1;
+		i2c18 = &i2c5mux0ch2;
+		i2c19 = &i2c5mux0ch3;
+		i2c20 = &i2c5mux1ch0;
+		i2c21 = &i2c5mux1ch1;
+		i2c22 = &i2c5mux1ch2;
+		i2c23 = &i2c5mux1ch3;
+		i2c24 = &i2c6mux0ch0;
+		i2c25 = &i2c6mux0ch1;
+		i2c26 = &i2c6mux0ch2;
+		i2c27 = &i2c6mux0ch3;
+		i2c28 = &i2c8mux0ch0;
+		i2c29 = &i2c8mux0ch1;
+		i2c30 = &i2c8mux0ch2;
+		i2c31 = &i2c8mux0ch3;
+		i2c32 = &i2c30mux0ch0;
+		i2c33 = &i2c30mux0ch1;
+		i2c34 = &i2c30mux0ch2;
+		i2c35 = &i2c30mux0ch3;
+		serial0 = &uart1;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial4:57600n8";
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+					  <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+					  <&adc1 2>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bmc_heartbeat_amber";
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "fp_id_amber";
+			default-state = "off";
+			gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "power_blue";
+			default-state = "off";
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	spi_gpio: spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+		status = "okay";
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+};
+
+&adc0 {
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		&pinctrl_adc1_default
+		&pinctrl_adc2_default
+		&pinctrl_adc3_default
+		&pinctrl_adc4_default
+		&pinctrl_adc5_default
+		&pinctrl_adc6_default
+		&pinctrl_adc7_default>;
+	status = "okay";
+};
+
+&adc1 {
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc10_default>;
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"BATTERY_DETECT","","BMC_I2C1_FPGA_ALERT","BMC_READY",
+			"IOEXP_INT_3V3","FM_ID_LED","","",
+	/*C0-C7*/	"","","","",
+			"PMBUS_REQ_N","PSU_FW_UPDATE_REQ_N","","BMC_I2C_SSIF_ALERT",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"FM_BMC_MUX1_SEL","","","",
+			"","","FM_DEBUG_PORT_PRSNT_N","FM_BMC_DBP_PRESENT_N",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","FLASH_WP_STATUS","BMC_JTAG_MUX_SEL","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"PCIE_EP_RST_EN","BMC_FRU_WP","SCM_HPM_STBY_RST_N",
+			"SCM_HPM_STBY_EN","STBY_POWER_PG_3V3","TH500_SHDN_OK","","",
+	/*N0-N7*/	"led-postcode-0","led-postcode-1","led-postcode-2",
+			"led-postcode-3","led-postcode-4","led-postcode-5",
+			"led-postcode-6","led-postcode-7",
+	/*O0-O7*/	"RUN_POWER_PG","PWR_BRAKE","CHASSIS_AC_LOSS","BSM_PRSNT_N",
+			"PSU_SMB_ALERT","FM_TPM_PRSNT_0_N","PSU_FW_UPDATING_N","",
+	/*P0-P7*/	"PWR_BTN_BMC_N","IPEX_CABLE_PRSNT","ID_RST_BTN_BMC_N",
+			"RST_BMC_RSTBTN_OUT_N","BMC_PWR_LED","RUN_POWER_EN","SHDN_FORCE","",
+	/*Q0-Q7*/	"IRQ_PCH_TPM_SPI_LV3_N","USB_OC0_REAR_N","UART_MUX_SEL",
+			"I2C_MUX_RESET","RSVD_NV_PLT_DETECT","SPI_TPM_INT",
+			"CPU_JTAG_MUX_SELECT","THERM_BB_OVERT",
+	/*R0-R7*/	"THERM_BB_WARN","SPI_BMC_FPGA_INT","CPU_BOOT_DONE","PMBUS_GNT",
+			"CHASSIS_PWR_BRK","PCIE_WAKE","PDB_THERM_OVERT","SHDN_REQ",
+	/*S0-S7*/	"","","SYS_BMC_PWRBTN_N","FM_TPM_PRSNT_1_N",
+			"FM_BMC_DEBUG_SW_N","UID_LED_N","SYS_FAULT_LED_N","RUN_POWER_FAULT",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"FM_DBP_BMC_PRDY_N","","","","","","","",
+	/*V0-V7*/	"L2_RST_REQ_OUT","L0L1_RST_REQ_OUT","BMC_ID_BEEP_SEL",
+			"BMC_I2C0_FPGA_ALERT","SMB_BMC_TMP_ALERT","PWR_LED_N",
+			"SYS_RST_OUT","IRQ_TPM_SPI_N",
+	/*W0-W7*/	"","","","","","","IRQ_ESPI_LPC_SERIRQ_ALERT0_N","",
+	/*X0-X7*/	"","FM_DBP_CPU_PREQ_GF_N","","","","","","",
+	/*Y0-Y7*/	"","","FM_FLASH_LATCH_N","BMC_EMMC_RST_N","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/	"","","","","","","","",
+	/*18B0-18B7*/	"","","","","FM_BOARD_BMC_REV_ID0",
+			"FM_BOARD_BMC_REV_ID1","FM_BOARD_BMC_REV_ID2","",
+	/*18C0-18C7*/	"","","SPI_BMC_BIOS_ROM_IRQ0_N","","","","","",
+	/*18D0-18D7*/	"","","","","","","","",
+	/*18E0-18E3*/	"FM_BMC_PROT_LS_EN","AC_PWR_BMC_BTN_N","","";
+};
+
+/* MB CPLD I2C */
+&i2c0 {
+	status = "okay";
+};
+
+/* CPU I2C */
+&i2c1 {
+	status = "okay";
+};
+
+/* MCIO 2A I2C */
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	/* Socket 0 SBRMI */
+	sbrmi@3c {
+		compatible = "amd,sbrmi";
+		reg = <0x3c>;
+	};
+
+	/* Socket 0 SBTSI */
+	sbtsi@4c {
+		compatible = "amd,sbtsi";
+		reg = <0x4c>;
+	};
+};
+
+&i2c4 {
+	multi-master;
+	mctp-controller;
+	status = "okay";
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	/* OCP NIC TEMP */
+	temperature-sensor@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+
+	/* OCP NIC FRU EEPROM */
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	/* I2C MUX for MCIO 1A */
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c5mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c5mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c5mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c5mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	/* I2C MUX for MCIO 0A */
+	i2c-mux@77 {
+		compatible = "nxp,pca9546";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c5mux1ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c5mux1ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c5mux1ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c5mux1ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	/* I2C MUX for PWRPIC #13 ~ #16 */
+	i2c-mux@77 {
+		compatible = "nxp,pca9546";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		/* PWRPIC #13 */
+		i2c6mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		/* PWRPIC #14 */
+		i2c6mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		/* PWRPIC #16 */
+		i2c6mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		/* PWRPIC #15 */
+		i2c6mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+/* SCM CPLD I2C */
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+
+	power-monitor@14 {
+		compatible = "infineon,xdp710";
+		reg = <0x14>;
+	};
+
+	adc@1d {
+		compatible = "ti,adc128d818";
+		reg = <0x1d>;
+		ti,mode = /bits/ 8 <1>;
+	};
+
+	power-sensor@40 {
+		compatible = "ti,ina238";
+		reg = <0x40>;
+		shunt-resistor = <1000>;
+	};
+
+	/* PADDLE BD IOEXP */
+	gpio-expander@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"HSC_OC_GPIO0", "HSC_OC_GPIO1",
+			"HSC_OC_GPIO2", "HSC_OC_GPIO3";
+	};
+
+	power-sensor@42 {
+		compatible = "ti,ina238";
+		reg = <0x42>;
+		shunt-resistor = <1000>;
+	};
+
+	power-monitor@43 {
+		compatible = "lltc,ltc4287";
+		reg = <0x43>;
+		shunt-resistor-micro-ohms = <250>;
+	};
+
+	power-sensor@44 {
+		compatible = "ti,ina238";
+		reg = <0x44>;
+		shunt-resistor = <1000>;
+	};
+
+	power-sensor@45 {
+		compatible = "ti,ina238";
+		reg = <0x45>;
+		shunt-resistor = <1000>;
+	};
+
+	power-monitor@47 {
+		compatible = "ti,tps25990";
+		reg = <0x47>;
+		ti,rimon-micro-ohms = <430000000>;
+	};
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp75";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp75";
+		reg = <0x49>;
+	};
+
+	/* PDB FRU */
+	eeprom@56 {
+		compatible = "atmel,24c128";
+		reg = <0x56>;
+	};
+
+	/* Paddle BD FRU */
+	eeprom@57 {
+		compatible = "atmel,24c128";
+		reg = <0x57>;
+	};
+
+	power-monitor@58 {
+		compatible = "renesas,isl28022";
+		reg = <0x58>;
+		shunt-resistor-micro-ohms = <1000>;
+	};
+
+	power-monitor@59 {
+		compatible = "renesas,isl28022";
+		reg = <0x59>;
+		shunt-resistor-micro-ohms = <1000>;
+	};
+
+	power-monitor@5a {
+		compatible = "renesas,isl28022";
+		reg = <0x5a>;
+		shunt-resistor-micro-ohms = <1000>;
+	};
+
+	power-monitor@5b {
+		compatible = "renesas,isl28022";
+		reg = <0x5b>;
+		shunt-resistor-micro-ohms = <1000>;
+	};
+
+	psu@5c {
+		compatible = "renesas,raa228006";
+		reg = <0x5c>;
+	};
+
+	fan-controller@5e{
+		compatible = "maxim,max31790";
+		reg = <0x5e>;
+	};
+
+	/* I2C MUX for PWRPIC #1, #2, #11, #12 */
+	i2c-mux@77 {
+		compatible = "nxp,pca9546";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		/* PWRPIC #1 */
+		i2c8mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		/* PWRPIC #2 */
+		i2c8mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		/* PWRPIC #12 (Connector to CXL BD) */
+		i2c8mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9546";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				i2c30mux0ch0: i2c@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				i2c30mux0ch1: i2c@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				i2c30mux0ch2: i2c@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					adc@1e {
+						compatible = "ti,adc128d818";
+						reg = <0x1e>;
+						ti,mode = /bits/ 8 <1>;
+					};
+
+					adc@1f {
+						compatible = "ti,adc128d818";
+						reg = <0x1f>;
+						ti,mode = /bits/ 8 <1>;
+					};
+
+					/* CXL BD IOEXP */
+					gpio-expander@27 {
+						compatible = "nxp,pca9535";
+						reg = <0x27>;
+						gpio-controller;
+						#gpio-cells = <2>;
+						gpio-line-names =
+						"IRQ_TEMP_0_ALERT_N","IRQ_TEMP_1_ALERT_N",
+						"ALERT_PMBUS_0_N","ALERT_PMBUS_1_N",
+						"ALERT_PMBUS_2_N","IRQ_INA230_12V_ALERT_N",
+						"RST_IOX_CXL_N","DEBUG_UART_SEL_0",
+						"DEBUG_UART_SEL_1","BMC_REMOTEJTAG_EN_N",
+						"JTAG_BMC_3V3_CTL_CLR_N","DDR_CH02_I2C_MUX_SEL",
+						"DDR_CH13_I2C_MUX_SEL","SYS_OK",
+						"CXL_VRHOT_ALERT_R1_N","";
+					};
+
+					temperature-sensor@4a {
+						compatible = "ti,tmp75";
+						reg = <0x4a>;
+					};
+
+					temperature-sensor@4c {
+						compatible = "ti,tmp432";
+						reg = <0x4c>;
+					};
+
+					power-sensor@4d {
+						compatible = "ti,ina230";
+						reg = <0x4d>;
+						shunt-resistor = <2000>;
+					};
+
+					temperature-sensor@4e {
+						compatible = "ti,tmp75";
+						reg = <0x4e>;
+					};
+
+					/* CXL FRU */
+					eeprom@50 {
+						compatible = "atmel,24c64";
+						reg = <0x50>;
+					};
+				};
+
+				i2c30mux0ch3: i2c@3 {
+					reg = <3>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+
+		/* PWRPIC #11 */
+		i2c8mux0ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	temperature-sensor@4b {
+		compatible = "ti,tmp75";
+		reg = <0x4b>;
+	};
+
+	/* SCM FRU */
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	/* BSM FRU */
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+};
+
+/* MCIO 0A I2C */
+&i2c10 {
+	status = "okay";
+
+	/* E1S EB IOEXP0 */
+	gpio-expander@21 {
+		compatible = "nxp,pca9535";
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <172 IRQ_TYPE_EDGE_FALLING>;
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"RST_SMB_E1S_0","LED_ACTIVE_E1S_0",
+			"E1S_0_PRSNT_N","RST_PCIE_E1S_0_PERST",
+			"E1S_0_PWRDIS","ALERT_INA_0",
+			"","",
+			"RST_SMB_E1S_1","LED_ACTIVE_E1S_1",
+			"E1S_1_PRSNT_N","RST_PCIE_E1S_1_PERST",
+			"E1S_1_PWRDIS","ALERT_INA_1",
+			"","";
+	};
+
+	/* E1S EB IOEXP1 */
+	gpio-expander@22 {
+		compatible = "nxp,pca9535";
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <174 IRQ_TYPE_EDGE_FALLING>;
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"P12V_E1S_EN_0","PWRGD_P12V_E1S_0",
+			"P12V_E1S_FLTB_0","PWRGD_P3V3_E1S_0",
+			"FM_P3V3_E1S_0_FAULT","P12V_E1S_EN_1",
+			"PWRGD_P12V_E1S_1","P12V_E1S_FLTB_1",
+			"PWRGD_P3V3_E1S_1","FM_P3V3_E1S_1_FAULT",
+			"","",
+			"","",
+			"PWRGD_P3V3_AUX","ALERT_TEMP";
+	};
+
+	power-sensor@40 {
+		compatible = "ti,ina233";
+		reg = <0x40>;
+		shunt-resistor = <2000>;
+		ti,maximum-expected-current-microamp = <32768000>;
+	};
+
+	power-sensor@45 {
+		compatible = "ti,ina233";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+		ti,maximum-expected-current-microamp = <32768000>;
+	};
+
+	adc@48 {
+		compatible = "ti,ads7830";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp75";
+		reg = <0x49>;
+	};
+
+	/* E1S EB FRU */
+	eeprom@54 {
+		compatible = "atmel,24c128";
+		reg = <0x54>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	/* MB IOEXP */
+	gpio-expander@21 {
+		compatible = "nxp,pca9535";
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <170 IRQ_TYPE_EDGE_FALLING>;
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"ALERT_CLKMUX_0_LOSS_N","ALERT_CLKMUX_1_LOSS_N",
+			"ALERT_CLKMUX_2_LOSS_N","ALERT_CLKMUX_3_LOSS_N",
+			"FM_CLKMUX_0_SEL","FM_CLKMUX_1_SEL",
+			"FM_CLKMUX_2_SEL","FM_CLKMUX_3_SEL",
+			"RST_USB_HUB_0_N","FM_CLKGEN_GPIO2",
+			"","FM_BMC_RTC_RST",
+			"FM_P3V_BAT_SCALED_EN","",
+			"FM_CLKGEN_GPIO4","RST_USB_HUB_1_N";
+	};
+
+	power-sensor@40 {
+		compatible = "ti,ina230";
+		reg = <0x40>;
+		shunt-resistor = <2000>;
+	};
+
+	power-sensor@41 {
+		compatible = "ti,ina230";
+		reg = <0x41>;
+		shunt-resistor = <2000>;
+	};
+
+	power-sensor@42 {
+		compatible = "ti,ina230";
+		reg = <0x42>;
+		shunt-resistor = <2000>;
+	};
+
+	power-sensor@43 {
+		compatible = "ti,ina230";
+		reg = <0x43>;
+		shunt-resistor = <2000>;
+	};
+
+	power-sensor@44 {
+		compatible = "ti,ina230";
+		reg = <0x44>;
+		shunt-resistor = <2000>;
+	};
+
+	power-sensor@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	adc@48 {
+		compatible = "ti,ads7830";
+		reg = <0x48>;
+	};
+
+	adc@49 {
+		compatible = "ti,ads7830";
+		reg = <0x49>;
+	};
+
+	adc@4b {
+		compatible = "ti,ads7830";
+		reg = <0x4b>;
+	};
+};
+
+/* MCIO 4A I2C */
+&i2c12 {
+	multi-master;
+	mctp-controller;
+	status = "okay";
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	power-sensor@40 {
+		compatible = "ti,ina230";
+		reg = <0x40>;
+		shunt-resistor = <2000>;
+	};
+
+	power-sensor@41 {
+		compatible = "ti,ina230";
+		reg = <0x41>;
+		shunt-resistor = <2000>;
+	};
+
+	power-sensor@44 {
+		compatible = "ti,ina230";
+		reg = <0x44>;
+		shunt-resistor = <2000>;
+	};
+
+	power-sensor@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	temperature-sensor@48 {
+		compatible = "national,lm75b";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "national,lm75b";
+		reg = <0x49>;
+	};
+
+	/* CLKGEN FRU */
+	eeprom@50 {
+		compatible = "atmel,24c16";
+		reg = <0x50>;
+	};
+
+	/* MB FRU */
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	/* CPU FRU */
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+/* PROT reserve */
+&i2c14 {
+	status = "okay";
+};
+
+/* MCIO 3A I2C */
+&i2c15 {
+	status = "okay";
+};
+
+&kcs2 {
+	aspeed,lpc-io-reg = <0xca8>;
+	status = "okay";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xca2>;
+	status = "okay";
+};
+
+&mac2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ncsi3_default>;
+	use-ncsi;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl_ncsi3_default: ncsi3_default {
+		function = "RMII3";
+		groups = "NCSI3";
+	};
+};
+
+&sgpiom0 {
+	ngpios = <128>;
+	bus-frequency = <2000000>;
+	gpio-line-names =
+	/*"input pin","output pin"*/
+	/*bit0-bit7*/
+	"PWRGD_CPU_PWROK","SGPIO_RSTBTN_OUT",
+	"PWRGD_CPU_PWROK_1","SGPIO_BMC_READY",
+	"PWRGD_CPU_PWROK_2","IBB_BMC_SRST",
+	"host0-ready","FM_I3C_SPD_AH_SEL_R",
+	"PCIe_HP_BOOT","FM_I3C_SPD_IP_SEL_R",
+	"PCIe_HP_DATA","FM_JTAG_BMC_MUX_S0_R",
+	"PCIe_HP_NIC","FM_JTAG_BMC_MUX_S1_R",
+	"","FM_JTAG_BMC_OE_1_R_N",
+	/*bit8-bit15*/
+	"PWRGD_PVDDCR_CPU0_P0","FM_JTAG_BMC_OE_R_N",
+	"PWRGD_PVDDCR_SOC_P0","FM_REMOTEJTAG_EN_R_N",
+	"PWRGD_PVDDCR_CPU1_P0","FM_CPU_FORCE_SELFREFRESH_R",
+	"PWRGD_P3V3_STBY","FM_CPU_NMI_SYNC_FLOOD_R_N",
+	"PWRGD_PVDD33_S5","FM_CPU_TRIGGERTSC_OE_R_N",
+	"PWRGD_PVDD18_S5_P0","FM_PASSWORD_CLEAR_R_N",
+	"PWRGD_PVDDIO_P0","FM_BIOS_USB_RECOVERY_N",
+	"PWRGD_PVDDIO_MEM_S3_P0","FM_USB_MUX_OE_R_N",
+	/*bit16-bit23*/
+	"PWRGD_P1V8_STBY","FM_USB_MUX_SEL_R",
+	"PWRGD_P1V0_STBY","RST_SMB_BOOT_R_N",
+	"PWRGD_P1V2_STBY","RST_SMB_MCIO0A_R_N",
+	"IBB_BMC_SRST","RST_SMB_NIC_R_N",
+	"PWRGD_P12V_E1S_0","FM_PPS_NIC_IN_BUF_OE_R_N",
+	"PWRGD_P12V_E1S_1","FM_PPS_NIC_IN_EN_R",
+	"RST_PCIE_BOOT_PERST_N","FM_PPS_NIC_IN_OE_R_N",
+	"PWRGD_P12V_NIC","FM_PPS_NIC_IN_S0_R",
+	/*bit24-bit31*/
+	"PWRGD_P12V_SCM","FM_PPS_NIC_IN_S1_R",
+	"PWRGD_P12V_DIMM","FM_PPS_NIC_OUT_BUF_OE_R_N",
+	"PWRGD_CPU_DIMM0_AH","FM_PPS_NIC_OUT_CPU_OE_R_N",
+	"PWRGD_CPU_DIMM1_IP","FM_PPS_NIC_OUT_EN_R",
+	"PWRGD_NIC_CPLD","JTAG_CPLD_DBREQ_R_N",
+	"ALERT_INA230_DIMM_0_N","HDT_HDR_RESET_R_N",
+	"ALERT_INA230_DIMM_1_N","FM_SMB_AUTH_MUX_OE_R_N",
+	"ALERT_INA230_E1S_0_N","FM_SCM_LED_R_N",
+	/*bit32-bit39*/
+	"ALERT_INA230_E1S_1_N","",
+	"ALERT_INA230_FAN0_N","",
+	"ALERT_INA230_FAN1_N","",
+	"ALERT_INA230_FAN2_N","",
+	"ALERT_INA230_FAN3_N","",
+	"ALERT_INA230_NIC_N","",
+	"ALERT_INA230_SCM_N","",
+	"ALERT_IRQ_PMBUS_PWR11_N","",
+	/*bit40-bit47*/
+	"ALERT_MCIO2A_LEAK_DETECT_N","",
+	"ALERT_MCIO3A_LEAK_DETECT_N","",
+	"ALERT_MCIO4A_LEAK_DETECT_N","",
+	"ALERT_OC_PADDLE2_N","",
+	"ALERT_OC_PWR2_N","",
+	"ALERT_OC_PWR11_N","",
+	"ALERT_PADDLE2_SMB_N","",
+	"ALERT_PWR14_SB2_LEAK_DETECT_N","",
+	/*bit48-bit55*/
+	"ALERT_PWR14_SB3_LEAK_DETECT_N","",
+	"ALERT_PWR15_SB2_LEAK_DETECT_N","",
+	"ALERT_PWR15_SB3_LEAK_DETECT_N","",
+	"ALERT_SMB_MCIO0A_N","",
+	"ALERT_SMB_MCIO1A_N","",
+	"ALERT_SMB_MCIO2A_N","",
+	"ALERT_SMB_MCIO2B_N","",
+	"ALERT_SMB_MCIO3A_N","",
+	/*bit56-bit63*/
+	"ALERT_SMB_MCIO3B_N","",
+	"ALERT_SMB_MCIO4A_N","",
+	"ALERT_SMB_MCIO4B_N","",
+	"ALERT_THERMALTRIP_MCIO1A_N","",
+	"ALERT_THERMALTRIP_MCIO2A_N","",
+	"ALERT_THERMALTRIP_MCIO3A_N","",
+	"ALERT_THERMALTRIP_MCIO4A_N","",
+	"ALERT_UV_PADDLE2_N","",
+	/*bit64-bit71*/
+	"ALERT_UV_PWR2_N","",
+	"ALERT_UV_PWR11_N","",
+	"ALERT_VR_SMB_N","",
+	"FAULT_FAN_0_N","",
+	"FAULT_FAN_1_N","",
+	"FAULT_FAN_2_N","",
+	"FAULT_FAN_3_N","",
+	"FAULT_P3V3_E1S_0_N","",
+	/*bit72-bit79*/
+	"FAULT_P3V3_E1S_1_N","",
+	"FAULT_P3V3_NIC_N","",
+	"FAULT_P12V_NIC_N","",
+	"FAULT_P12V_SCM_N","",
+	"P0_I3C_APML_ALERT_L","",
+	"ALERT_INLET_TEMP_N","",
+	"FM_CPU_PROCHOT_R_N","",
+	"FM_CPU_THERMTRIP_N","",
+	/*bit80-bit87*/
+	"ALERT_OUTLET_TEMP_N","",
+	"ALERT_RTC_N","",
+	"PVDDCR_CPU0_P0_OCP_N","",
+	"PVDDCR_CPU1_P0_OCP_N","",
+	"PVDDCR_SOC_P0_OCP_N","",
+	"MB_IOEXP_INT","",
+	"E1S_0_BD_IOEXP","",
+	"E1S_1_BD_IOEXP","",
+	/*bit88-bit95*/
+	"PADDLE_BD_IOEXP_INT","",
+	"FM_BOARD_REV_ID0","",
+	"FM_BOARD_REV_ID1","",
+	"FM_BOARD_REV_ID2","",
+	"FM_VR_TYPE_ID0","",
+	"FM_VR_TYPE_ID1","",
+	"PRSNT_BOOT_N_IOEXP","",
+	"PRSNT_DATA_N_IOEXP","",
+	/*bit96-bit103*/
+	"PRSNT_NIC_N_IOEXP","",
+	"PRSNT_BOOT_N_FF","",
+	"PRSNT_MCIO1A_N_FF","",
+	"NIC_PRSNT_N","",
+	"","",
+	"","",
+	"","",
+	"","",
+	/*bit104-bit111*/
+	"","","","","","","","","","","","","","","","",
+	/*bit112-bit119*/
+	"","","","","","","","","","","","","","","","",
+	/*bit120-bit127*/
+	"","","","","","","","","","","","","","","","";
+	status = "okay";
+};
+
+/* BIOS Flash */
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2_default>;
+	status = "okay";
+
+	flash@0 {
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <12000000>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+		status = "okay";
+	};
+};
+
+/* Host Console */
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+/* SOL */
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+/* BMC Console */
+&uart5 {
+	status = "okay";
+};
+
+&wdt1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemitev2.dts
index 8864e9c312a8..5143f85fbd70 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemitev2.dts
@@ -95,7 +95,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_rmii1_default>;
 	use-ncsi;
-	mlx,multi-host;
+	mellanox,multi-host;
 };
 
 &adc {
@@ -207,11 +207,16 @@
 
 &i2c12 {
 	status = "okay";
-	//MEZZ_FRU
-	eeprom@51 {
-		compatible = "atmel,24c64";
-		reg = <0x51>;
-		pagesize = <32>;
+};
+
+&i2c13 {
+	status = "okay";
+	// Debug Card
+	multi-master;
+	ipmb13@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
 	};
 };
 
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dts
new file mode 100644
index 000000000000..63fcb7a7619a
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dts
@@ -0,0 +1,609 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2025 IBM Corp.
+/dts-v1/;
+
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include "aspeed-g6.dtsi"
+#include "ibm-power11-dual.dtsi"
+
+/ {
+	model = "Balcones";
+	compatible = "ibm,balcones-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+		i2c16 = &i2c11mux0chn0;
+		i2c17 = &i2c11mux0chn1;
+		i2c18 = &i2c11mux0chn2;
+		i2c19 = &i2c11mux0chn3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-fan0-presence {
+			gpios = <&gpio0 ASPEED_GPIO(F, 4) GPIO_ACTIVE_LOW>;
+			label = "fan0-presence";
+			linux,code = <6>;
+		};
+
+		event-fan1-presence {
+			gpios = <&gpio0 ASPEED_GPIO(F, 5) GPIO_ACTIVE_LOW>;
+			label = "fan1-presence";
+			linux,code = <7>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 7>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-fan0 {
+			gpios = <&gpio0 ASPEED_GPIO(G, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		led-fan1 {
+			gpios = <&gpio0 ASPEED_GPIO(G, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		led-rear-enc-id0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		led-rear-enc-fault0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		event_log: region@b3d00000 {
+			reg = <0xb3d00000 0x100000>;
+			no-map;
+		};
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>; /* KMSG_DUMP_EMERG */
+		};
+
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			reg = <0xb4000000 0x04000000>; /* 64M */
+			no-map;
+		};
+
+		/* VGA region is dictated by hardware strapping */
+		vga_memory: region@bf000000 {
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;  /* 16M */
+			no-map;
+		};
+	};
+};
+
+&adc1 {
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emmc {
+	clk-phase-mmc-hs200 = <180>, <180>;
+	status = "okay";
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+		/*A0-A7*/	"","","","","","","","",
+		/*B0-B7*/	"","","","","","","checkstop","",
+		/*C0-C7*/	"","","","","","","","",
+		/*D0-D7*/	"","","","","","","","",
+		/*E0-E7*/	"","","","","","","","",
+		/*F0-F7*/	"","fan-ctlr-reset","rtc-battery-voltage-read-enable",
+				"reset-cause-pinhole","","","","",
+		/*G0-G7*/	"fan0","fan1","","","","","","",
+		/*H0-H7*/	"","","rear-enc-id0","rear-enc-fault0","","","","",
+		/*I0-I7*/	"","","","","","","bmc-secure-boot","",
+		/*J0-J7*/	"","","","","","","","",
+		/*K0-K7*/	"","","","","","","","",
+		/*L0-L7*/	"","","","","","","","",
+		/*M0-M7*/	"","","","","","","","",
+		/*N0-N7*/	"","","","","","","","",
+		/*O0-O7*/	"","","","usb-power","","","","",
+		/*P0-P7*/	"","","","","","","","",
+		/*Q0-Q7*/	"cfam-reset","","regulator-standby-faulted","","","","","",
+		/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","",
+				"","","",
+		/*S0-S7*/	"presence-ps0","presence-ps1","","","power-ffs-sync-history","","",
+				"",
+		/*T0-T7*/	"","","","","","","","",
+		/*U0-U7*/	"","","","","","","","",
+		/*V0-V7*/	"","","","","","","","",
+		/*W0-W7*/	"","","","","","","","",
+		/*X0-X7*/	"","","","","","","","",
+		/*Y0-Y7*/	"","","","","","","","",
+		/*Z0-Z7*/	"","","","","","","","";
+
+	usb-power-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	gpio@20 {
+		compatible = "ti,tca9554";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"",
+			"RUSSEL_FW_I2C_ENABLE_N",
+			"RUSSEL_OPPANEL_PRESENCE_N",
+			"BLYTH_OPPANEL_PRESENCE_N",
+			"CPU_TPM_CARD_PRESENT_N",
+			"",
+			"",
+			"DASD_BP_PRESENT_N";
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	pmic@64 {
+		compatible = "ti,ucd90160";
+		reg = <0x64>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	power-supply@5a {
+		compatible = "acbel,fsg032";
+		reg = <0x5a>;
+	};
+
+	power-supply@5b {
+		compatible = "acbel,fsg032";
+		reg = <0x5b>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+
+	led-controller@62 {
+		compatible = "nxp,pca9551";
+		reg = <0x62>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "cablecard2-cxp-top";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "cablecard2-cxp-bot";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	multi-master;
+	status = "okay";
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	pwm@53 {
+		compatible = "maxim,max31785a";
+		reg = <0x53>;
+	};
+
+	led-controller@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "front-sys-id0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "front-check-log0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "front-enc-fault1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "front-sys-pwron0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	lcd-controller@62 {
+		compatible = "ibm,op-panel";
+		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	pressure-sensor@76 {
+		compatible = "infineon,dps310";
+		reg = <0x76>;
+		#io-channel-cells = <0>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	led-controller@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"",
+			"APSS_RESET_N",
+			"",
+			"N_MODE_CPU_N",
+			"",
+			"",
+			"P10_DCM_PRESENT",
+			"";
+	};
+
+	led-controller@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"",
+			"",
+			"SLOT2_PRSNT_EN_RSVD",
+			"",
+			"",
+			"",
+			"",
+			"SLOT2_EXPANDER_PRSNT_N",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"";
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	temperature-sensor@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	gpio@20 {
+		compatible = "ti,tca9554";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"BOOT_RCVRY_TWI",
+			"BOOT_RCVRY_UART",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"PE_SWITCH_RSTB_N";
+	};
+
+	temperature-sensor@4c {
+		compatible = "ti,tmp435";
+		reg = <0x4c>;
+	};
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9849";
+		reg = <0x75>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c11mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c11mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c11mux0chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c11mux0chn3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	tpm@2e {
+		compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
+		reg = <0x2e>;
+		memory-region = <&event_log>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	led-controller@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "nvme3";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "nvme2";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "nvme1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "nvme0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c14 {
+	status = "okay";
+};
+
+&i2c15 {
+	status = "okay";
+};
+
+&ibt {
+	status = "okay";
+};
+
+&kcs2 {
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+	status = "okay";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+	status = "okay";
+};
+
+&lpc_ctrl {
+	memory-region = <&flash_memory>;
+	status = "okay";
+};
+
+&mac2 {
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	use-ncsi;
+	status = "okay";
+};
+
+&pinctrl_emmc_default {
+	bias-disable;
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge-4u.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge-4u.dts
new file mode 100644
index 000000000000..839aad4ddd91
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge-4u.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2024 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-bmc-ibm-blueridge.dts"
+
+/ {
+	model = "Blueridge 4U";
+};
+
+&i2c3 {
+	power-supply@6a {
+		compatible = "ibm,cffps";
+		reg = <0x6a>;
+	};
+
+	power-supply@6b {
+		compatible = "ibm,cffps";
+		reg = <0x6b>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts
new file mode 100644
index 000000000000..bc4c46235421
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts
@@ -0,0 +1,1688 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2024 IBM Corp.
+/dts-v1/;
+
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include "aspeed-g6.dtsi"
+#include "ibm-power11-quad.dtsi"
+
+/ {
+	model = "Blueridge 2U";
+	compatible = "ibm,blueridge-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+		i2c16 = &i2c2mux0;
+		i2c17 = &i2c2mux1;
+		i2c18 = &i2c2mux2;
+		i2c19 = &i2c2mux3;
+		i2c20 = &i2c4mux0chn0;
+		i2c21 = &i2c4mux0chn1;
+		i2c22 = &i2c4mux0chn2;
+		i2c23 = &i2c5mux0chn0;
+		i2c24 = &i2c5mux0chn1;
+		i2c25 = &i2c6mux0chn0;
+		i2c26 = &i2c6mux0chn1;
+		i2c27 = &i2c6mux0chn2;
+		i2c28 = &i2c6mux0chn3;
+		i2c29 = &i2c11mux0chn0;
+		i2c30 = &i2c11mux0chn1;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		event_log: region@b3d00000 {
+			reg = <0xb3d00000 0x100000>;
+			no-map;
+		};
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>; /* KMSG_DUMP_EMERG */
+		};
+
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			reg = <0xb4000000 0x04000000>; /* 64M */
+			no-map;
+		};
+
+		/* VGA region is dictated by hardware strapping */
+		vga_memory: region@bf000000 {
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;  /* 16M */
+			no-map;
+		};
+	};
+
+	i2c-mux {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-parent = <&i2c2>;
+		idle-state = <0>;
+		mux-gpios = <&gpio0 ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>,
+			    <&gpio0 ASPEED_GPIO(G, 5) GPIO_ACTIVE_HIGH>;
+
+		i2c2mux0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2mux1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2mux2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2mux3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* BMC Card fault LED at the back */
+		led-bmc-ingraham0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure ID LED at the back */
+		led-rear-enc-id0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure fault LED at the back */
+		led-rear-enc-fault0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+		};
+
+		/* PCIE slot power LED */
+		led-pcieslot-power {
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-fan0-presence {
+			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
+			label = "fan0-presence";
+			linux,code = <6>;
+		};
+
+		event-fan1-presence {
+			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
+			label = "fan1-presence";
+			linux,code = <7>;
+		};
+
+		event-fan2-presence {
+			gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
+			label = "fan2-presence";
+			linux,code = <8>;
+		};
+
+		event-fan3-presence {
+			gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
+			label = "fan3-presence";
+			linux,code = <9>;
+		};
+
+		event-fan4-presence {
+			gpios = <&pca0 10 GPIO_ACTIVE_LOW>;
+			label = "fan4-presence";
+			linux,code = <10>;
+		};
+
+		event-fan5-presence {
+			gpios = <&pca0 11 GPIO_ACTIVE_LOW>;
+			label = "fan5-presence";
+			linux,code = <11>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 7>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"bmc-management-ready","","","","","","checkstop","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","",
+			"factory-reset-toggle","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","led-bmc-ingraham0","led-rear-enc-id0","led-rear-enc-fault0","","","",
+			"",
+	/*I0-I7*/	"","","","","","","bmc-secure-boot","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","usb-power","","","","",
+	/*P0-P7*/	"","","","","led-pcieslot-power","","","",
+	/*Q0-Q7*/	"cfam-reset","","regulator-standby-faulted","","","","","",
+	/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","",
+			"",
+	/*S0-S7*/	"presence-ps0","presence-ps1","presence-ps2","presence-ps3",
+			"power-ffs-sync-history","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+
+	i2c3-mux-oe-n-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 6) GPIO_ACTIVE_LOW>;
+		line-name = "I2C3_MUX_OE_N";
+		output-high;
+	};
+
+	usb-power-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&pinctrl_emmc_default {
+	bias-disable;
+};
+
+&emmc {
+	status = "okay";
+	clk-phase-mmc-hs200 = <180>, <180>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	gpio@20 {
+		compatible = "ti,tca9554";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "",
+			"RUSSEL_FW_I2C_ENABLE_N",
+			"RUSSEL_OPPANEL_PRESENCE_N",
+			"BLYTH_OPPANEL_PRESENCE_N",
+			"CPU_TPM_CARD_PRESENT_N",
+			"DASD_BP2_PRESENT_N",
+			"DASD_BP1_PRESENT_N",
+			"DASD_BP0_PRESENT_N";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	power-supply@68 {
+		compatible = "ibm,cffps";
+		reg = <0x68>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps";
+		reg = <0x69>;
+	};
+
+	led-controller@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"SLOT0_PRSNT_EN_RSVD", "SLOT1_PRSNT_EN_RSVD",
+			"SLOT2_PRSNT_EN_RSVD", "SLOT3_PRSNT_EN_RSVD",
+			"SLOT4_PRSNT_EN_RSVD", "SLOT0_EXPANDER_PRSNT_N",
+			"SLOT1_EXPANDER_PRSNT_N", "SLOT2_EXPANDER_PRSNT_N",
+			"SLOT3_EXPANDER_PRSNT_N", "SLOT4_EXPANDER_PRSNT_N",
+			"", "", "", "", "", "";
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp275";
+		reg = <0x49>;
+	};
+
+	temperature-sensor@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c4mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			led-controller@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard0-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard0-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c4mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+
+		i2c4mux0chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp275";
+		reg = <0x49>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c5mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			led-controller@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard3-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard3-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			led-controller@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard4-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard4-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+
+	temperature-sensor@4b {
+		compatible = "ti,tmp275";
+		reg = <0x4b>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c6mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c6mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+		};
+
+		i2c6mux0chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		i2c6mux0chn3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+&i2c7 {
+	multi-master;
+	status = "okay";
+
+	led-controller@30 {
+		compatible = "ibm,pca9552";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "pcieslot0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "pcieslot1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "pcieslot2";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "pcieslot3";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "pcieslot4";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "cpu1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "cpu-vrm1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "lcd-russel";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	led-controller@31 {
+		compatible = "ibm,pca9552";
+		reg = <0x31>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "ddimm0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "ddimm1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "ddimm2";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "ddimm3";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "ddimm4";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "ddimm5";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "ddimm6";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "ddimm7";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "ddimm8";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "ddimm9";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "ddimm10";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "ddimm11";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@c {
+			reg = <12>;
+			default-state = "keep";
+			label = "ddimm12";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@d {
+			reg = <13>;
+			default-state = "keep";
+			label = "ddimm13";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@e {
+			reg = <14>;
+			default-state = "keep";
+			label = "ddimm14";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@f {
+			reg = <15>;
+			default-state = "keep";
+			label = "ddimm15";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	led-controller@32 {
+		compatible = "ibm,pca9552";
+		reg = <0x32>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "ddimm16";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "ddimm17";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "ddimm18";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "ddimm19";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "ddimm20";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "ddimm21";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "ddimm22";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "ddimm23";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "ddimm24";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "ddimm25";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "ddimm26";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "ddimm27";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@c {
+			reg = <12>;
+			default-state = "keep";
+			label = "ddimm28";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@d {
+			reg = <13>;
+			default-state = "keep";
+			label = "ddimm29";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@e {
+			reg = <14>;
+			default-state = "keep";
+			label = "ddimm30";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@f {
+			reg = <15>;
+			default-state = "keep";
+			label = "ddimm31";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	led-controller@33 {
+		compatible = "ibm,pca9552";
+		reg = <0x33>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "planar";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "cpu0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "dasd-pyramid0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "dasd-pyramid1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "dasd-pyramid2";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "cpu0-vrm0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "rtc-battery";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "base-blyth";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "pcieslot6";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "pcieslot7";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "pcieslot8";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@c {
+			reg = <12>;
+			default-state = "keep";
+			label = "pcieslot9";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@d {
+			reg = <13>;
+			default-state = "keep";
+			label = "pcieslot10";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@e {
+			reg = <14>;
+			default-state = "keep";
+			label = "pcieslot11";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@f {
+			reg = <15>;
+			default-state = "keep";
+			label = "tpm-wilson";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	humidity-sensor@40 {
+		compatible = "silabs,si7020";
+		reg = <0x40>;
+	};
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	pwm@52 {
+		compatible = "maxim,max31785a";
+		reg = <0x52>;
+	};
+
+	led-controller@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "front-sys-id0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "front-check-log0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "front-enc-fault1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "front-sys-pwron0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pca0: led-controller@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "fan0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "fan1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "fan2";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "fan3";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "fan4";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "fan5";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	lcd-controller@62 {
+		compatible = "ibm,op-panel";
+		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	pressure-sensor@76 {
+		compatible = "infineon,dps310";
+		reg = <0x76>;
+		#io-channel-cells = <0>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	pmic@11 {
+		compatible = "ti,ucd90320";
+		reg = <0x11>;
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	led-controller@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"", "", "", "", "", "", "P10_DCM0_PRES", "P10_DCM1_PRES",
+			"", "", "", "", "PRESENT_VRM_DCM0_N", "PRESENT_VRM_DCM1_N",
+			"power-config-full-load", "";
+	};
+
+	led-controller@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"SLOT6_PRSNT_EN_RSVD", "SLOT7_PRSNT_EN_RSVD",
+			"SLOT8_PRSNT_EN_RSVD", "SLOT9_PRSNT_EN_RSVD",
+			"SLOT10_PRSNT_EN_RSVD", "SLOT11_PRSNT_EN_RSVD",
+			"SLOT6_EXPANDER_PRSNT_N", "SLOT7_EXPANDER_PRSNT_N",
+			"SLOT8_EXPANDER_PRSNT_N", "SLOT9_EXPANDER_PRSNT_N",
+			"SLOT10_EXPANDER_PRSNT_N", "SLOT11_EXPANDER_PRSNT_N",
+			"", "", "", "";
+	};
+
+};
+
+&i2c9 {
+	status = "okay";
+
+	temperature-sensor@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	temperature-sensor@4d {
+		compatible = "ti,tmp423";
+		reg = <0x4d>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+
+	temperature-sensor@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	temperature-sensor@4d {
+		compatible = "ti,tmp423";
+		reg = <0x4d>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp275";
+		reg = <0x49>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c11mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			led-controller@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard10-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard10-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c11mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	tpm@2e {
+		compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
+		reg = <0x2e>;
+		memory-region = <&event_log>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	led-controller@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "nvme0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "nvme1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "nvme2";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "nvme3";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "nvme4";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "nvme5";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "nvme6";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "nvme7";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c14 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	led-controller@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "nvme8";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "nvme9";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "nvme10";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "nvme11";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "nvme12";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "nvme13";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "nvme14";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "nvme15";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c15 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	led-controller@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "nvme16";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "nvme17";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "nvme18";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "nvme19";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "nvme20";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "nvme21";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "nvme22";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "nvme23";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
+		 <&syscon ASPEED_CLK_MAC4RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts
new file mode 100644
index 000000000000..a37399ff3cea
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts
@@ -0,0 +1,608 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2022 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Bonnell";
+	compatible = "ibm,bonnell-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+		i2c16 = &i2c11mux0chn0;
+		i2c17 = &i2c11mux0chn1;
+		i2c18 = &i2c11mux0chn2;
+		i2c19 = &i2c11mux0chn3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		event_log: tcg_event_log@b3d00000 {
+			no-map;
+			reg = <0xb3d00000 0x100000>;
+		};
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>; /* KMSG_DUMP_EMERG */
+		};
+
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			no-map;
+			reg = <0xb4000000 0x04000000>; /* 64M */
+		};
+
+		/* VGA region is dictated by hardware strapping */
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;  /* 16M */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		fan0 {
+			gpios = <&gpio0 ASPEED_GPIO(G, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		fan1 {
+			gpios = <&gpio0 ASPEED_GPIO(G, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		rear-enc-id0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		rear-enc-fault0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <1000>;
+
+		fan0-presence {
+			label = "fan0-presence";
+			gpios = <&gpio0 ASPEED_GPIO(F, 4) GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		fan1-presence {
+			label = "fan1-presence";
+			gpios = <&gpio0 ASPEED_GPIO(F, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 7>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+		/*A0-A7*/	"","","","","","","","",
+		/*B0-B7*/	"","","","","","","checkstop","",
+		/*C0-C7*/	"","","","","","","","",
+		/*D0-D7*/	"","","","","","","","",
+		/*E0-E7*/	"","","","","","","","",
+		/*F0-F7*/	"","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","","",
+		/*G0-G7*/	"fan0","fan1","","","","","","",
+		/*H0-H7*/	"","","rear-enc-id0","rear-enc-fault0","","","","",
+		/*I0-I7*/	"","","","","","","bmc-secure-boot","",
+		/*J0-J7*/	"","","","","","","","",
+		/*K0-K7*/	"","","","","","","","",
+		/*L0-L7*/	"","","","","","","","",
+		/*M0-M7*/	"","","","","","","","",
+		/*N0-N7*/	"","","","","","","","",
+		/*O0-O7*/	"","","","usb-power","","","","",
+		/*P0-P7*/	"","","","","","","","",
+		/*Q0-Q7*/	"cfam-reset","","regulator-standby-faulted","","","","","",
+		/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","","",
+		/*S0-S7*/	"presence-ps0","presence-ps1","","","power-ffs-sync-history","","","",
+		/*T0-T7*/	"","","","","","","","",
+		/*U0-U7*/	"","","","","","","","",
+		/*V0-V7*/	"","","","","","","","",
+		/*W0-W7*/	"","","","","","","","",
+		/*X0-X7*/	"","","","","","","","",
+		/*Y0-Y7*/	"","","","","","","","",
+		/*Z0-Z7*/	"","","","","","","","";
+
+	usb-power-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&pinctrl_emmc_default {
+	bias-disable;
+};
+
+&emmc {
+	status = "okay";
+	clk-phase-mmc-hs200 = <180>, <180>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	tca9554@20 {
+		compatible = "ti,tca9554";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "",
+			"RUSSEL_FW_I2C_ENABLE_N",
+			"RUSSEL_OPPANEL_PRESENCE_N",
+			"BLYTH_OPPANEL_PRESENCE_N",
+			"CPU_TPM_CARD_PRESENT_N",
+			"",
+			"",
+			"DASD_BP_PRESENT_N";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	ucd90160@64 {
+		compatible = "ti,ucd90160";
+		reg = <0x64>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	power-supply@5a {
+		compatible = "acbel,fsg032";
+		reg = <0x5a>;
+	};
+
+	power-supply@5b {
+		compatible = "acbel,fsg032";
+		reg = <0x5b>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	multi-master;
+	status = "okay";
+
+	si7021-a20@40 {
+		compatible = "silabs,si7020";
+		reg = <0x40>;
+	};
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	max31785@52 {
+		compatible = "maxim,max31785a";
+		reg = <0x52>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan0: fan@0 {
+			reg = <0>;
+		};
+
+		fan1: fan@1 {
+			reg = <1>;
+		};
+	};
+
+	pca9551@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "front-sys-id0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "front-check-log0";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "front-enc-fault1";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "front-sys-pwron0";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	ibm-panel@62 {
+		compatible = "ibm,op-panel";
+		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	dps: dps310@76 {
+		compatible = "infineon,dps310";
+		reg = <0x76>;
+		#io-channel-cells = <0>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	pca9551@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "",
+			"APSS_RESET_N",
+			"",
+			"N_MODE_CPU_N",
+			"",
+			"",
+			"P10_DCM_PRESENT",
+			"";
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	tca9554@20 {
+		compatible = "ti,tca9554";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "BOOT_RCVRY_TWI",
+			"BOOT_RCVRY_UART",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"PE_SWITCH_RSTB_N";
+	};
+
+	tmp435@4c {
+		compatible = "ti,tmp435";
+		reg = <0x4c>;
+	};
+
+	pca9849@75 {
+		compatible = "nxp,pca9849";
+		reg = <0x75>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c11mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c11mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c11mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c11mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	tpm@2e {
+		compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
+		reg = <0x2e>;
+		memory-region = <&event_log>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	pca9551@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "nvme3";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "nvme2";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "nvme1";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "nvme0";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c14 {
+	status = "okay";
+};
+
+&i2c15 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
+
+#include "ibm-power10-dual.dtsi"
+
+&cfam0_i2c10 {
+	eeprom@50 {
+		compatible = "atmel,at30tse004a";
+		reg = <0x50>;
+	};
+};
+
+&cfam0_i2c11 {
+	eeprom@50 {
+		compatible = "atmel,at30tse004a";
+		reg = <0x50>;
+	};
+};
+
+&cfam0_i2c12 {
+	eeprom@50 {
+		compatible = "atmel,at30tse004a";
+		reg = <0x50>;
+	};
+};
+
+&cfam0_i2c13 {
+	eeprom@50 {
+		compatible = "atmel,at30tse004a";
+		reg = <0x50>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts
new file mode 100644
index 000000000000..5a0975d52492
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts
@@ -0,0 +1,4038 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2020 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Everest";
+	compatible = "ibm,everest-bmc", "aspeed,ast2600";
+
+	aliases {
+		i2c500 = &cfam4_i2c0;
+		i2c501 = &cfam4_i2c1;
+		i2c510 = &cfam4_i2c10;
+		i2c511 = &cfam4_i2c11;
+		i2c512 = &cfam4_i2c12;
+		i2c513 = &cfam4_i2c13;
+		i2c514 = &cfam4_i2c14;
+		i2c515 = &cfam4_i2c15;
+		i2c602 = &cfam5_i2c2;
+		i2c603 = &cfam5_i2c3;
+		i2c610 = &cfam5_i2c10;
+		i2c611 = &cfam5_i2c11;
+		i2c614 = &cfam5_i2c14;
+		i2c615 = &cfam5_i2c15;
+		i2c616 = &cfam5_i2c16;
+		i2c617 = &cfam5_i2c17;
+		i2c700 = &cfam6_i2c0;
+		i2c701 = &cfam6_i2c1;
+		i2c710 = &cfam6_i2c10;
+		i2c711 = &cfam6_i2c11;
+		i2c712 = &cfam6_i2c12;
+		i2c713 = &cfam6_i2c13;
+		i2c714 = &cfam6_i2c14;
+		i2c715 = &cfam6_i2c15;
+		i2c802 = &cfam7_i2c2;
+		i2c803 = &cfam7_i2c3;
+		i2c810 = &cfam7_i2c10;
+		i2c811 = &cfam7_i2c11;
+		i2c814 = &cfam7_i2c14;
+		i2c815 = &cfam7_i2c15;
+		i2c816 = &cfam7_i2c16;
+		i2c817 = &cfam7_i2c17;
+
+		i2c16 = &i2c4mux0chn0;
+		i2c17 = &i2c4mux0chn1;
+		i2c18 = &i2c4mux0chn2;
+		i2c19 = &i2c5mux0chn0;
+		i2c20 = &i2c5mux0chn1;
+		i2c21 = &i2c5mux0chn2;
+		i2c22 = &i2c5mux0chn3;
+		i2c23 = &i2c6mux0chn0;
+		i2c24 = &i2c6mux0chn1;
+		i2c25 = &i2c6mux0chn2;
+		i2c26 = &i2c6mux0chn3;
+		i2c27 = &i2c14mux0chn0;
+		i2c28 = &i2c14mux0chn1;
+		i2c29 = &i2c14mux0chn2;
+		i2c30 = &i2c14mux0chn3;
+		i2c31 = &i2c14mux1chn0;
+		i2c32 = &i2c14mux1chn1;
+		i2c33 = &i2c14mux1chn2;
+		i2c34 = &i2c14mux1chn3;
+		i2c35 = &i2c15mux0chn0;
+		i2c36 = &i2c15mux0chn1;
+		i2c37 = &i2c15mux0chn2;
+		i2c38 = &i2c15mux0chn3;
+		i2c39 = &i2c15mux1chn0;
+		i2c40 = &i2c15mux1chn1;
+		i2c41 = &i2c15mux1chn2;
+		i2c42 = &i2c15mux1chn3;
+		i2c43 = &i2c15mux2chn0;
+		i2c44 = &i2c15mux2chn1;
+		i2c45 = &i2c15mux2chn2;
+		i2c46 = &i2c15mux2chn3;
+		i2c47 = &i2c8mux0chn0;
+		i2c48 = &i2c8mux0chn1;
+
+		serial4 = &uart5;
+
+		sbefifo500 = &sbefifo500;
+		sbefifo501 = &sbefifo501;
+		sbefifo510 = &sbefifo510;
+		sbefifo511 = &sbefifo511;
+		sbefifo512 = &sbefifo512;
+		sbefifo513 = &sbefifo513;
+		sbefifo514 = &sbefifo514;
+		sbefifo515 = &sbefifo515;
+		sbefifo602 = &sbefifo602;
+		sbefifo603 = &sbefifo603;
+		sbefifo610 = &sbefifo610;
+		sbefifo611 = &sbefifo611;
+		sbefifo614 = &sbefifo614;
+		sbefifo615 = &sbefifo615;
+		sbefifo616 = &sbefifo616;
+		sbefifo617 = &sbefifo617;
+		sbefifo700 = &sbefifo700;
+		sbefifo701 = &sbefifo701;
+		sbefifo710 = &sbefifo710;
+		sbefifo711 = &sbefifo711;
+		sbefifo712 = &sbefifo712;
+		sbefifo713 = &sbefifo713;
+		sbefifo714 = &sbefifo714;
+		sbefifo715 = &sbefifo715;
+		sbefifo802 = &sbefifo802;
+		sbefifo803 = &sbefifo803;
+		sbefifo810 = &sbefifo810;
+		sbefifo811 = &sbefifo811;
+		sbefifo814 = &sbefifo814;
+		sbefifo815 = &sbefifo815;
+		sbefifo816 = &sbefifo816;
+		sbefifo817 = &sbefifo817;
+
+		scom500 = &scom500;
+		scom501 = &scom501;
+		scom510 = &scom510;
+		scom511 = &scom511;
+		scom512 = &scom512;
+		scom513 = &scom513;
+		scom514 = &scom514;
+		scom515 = &scom515;
+		scom602 = &scom602;
+		scom603 = &scom603;
+		scom610 = &scom610;
+		scom611 = &scom611;
+		scom614 = &scom614;
+		scom615 = &scom615;
+		scom616 = &scom616;
+		scom617 = &scom617;
+		scom700 = &scom700;
+		scom701 = &scom701;
+		scom710 = &scom710;
+		scom711 = &scom711;
+		scom712 = &scom712;
+		scom713 = &scom713;
+		scom714 = &scom714;
+		scom715 = &scom715;
+		scom802 = &scom802;
+		scom803 = &scom803;
+		scom810 = &scom810;
+		scom811 = &scom811;
+		scom814 = &scom814;
+		scom815 = &scom815;
+		scom816 = &scom816;
+		scom817 = &scom817;
+
+		spi50 = &cfam4_spi0;
+		spi51 = &cfam4_spi1;
+		spi52 = &cfam4_spi2;
+		spi53 = &cfam4_spi3;
+		spi60 = &cfam5_spi0;
+		spi61 = &cfam5_spi1;
+		spi62 = &cfam5_spi2;
+		spi63 = &cfam5_spi3;
+		spi70 = &cfam6_spi0;
+		spi71 = &cfam6_spi1;
+		spi72 = &cfam6_spi2;
+		spi73 = &cfam6_spi3;
+		spi80 = &cfam7_spi0;
+		spi81 = &cfam7_spi1;
+		spi82 = &cfam7_spi2;
+		spi83 = &cfam7_spi3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		event_log: tcg_event_log@b3d00000 {
+			no-map;
+			reg = <0xb3d00000 0x100000>;
+		};
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>; /* KMSG_DUMP_EMERG */
+		};
+
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			no-map;
+			reg = <0xb4000000 0x04000000>; /* 64M */
+		};
+
+		/* VGA region is dictated by hardware strapping */
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>; /* 16M */
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca0 15 GPIO_ACTIVE_LOW>;
+			linux,code = <15>;
+		};
+
+		event-fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca0 14 GPIO_ACTIVE_LOW>;
+			linux,code = <14>;
+		};
+
+		event-fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
+			linux,code = <13>;
+		};
+
+		event-fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca0 12 GPIO_ACTIVE_LOW>;
+			linux,code = <12>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* RTC battery fault LED at the back */
+		led-rtc-battery {
+			gpios = <&gpio0 ASPEED_GPIO(H, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		/* BMC Card fault LED at the back */
+		led-bmc {
+			gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure Identify LED at the back */
+		led-rear-enc-id0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure fault LED at the back */
+		led-rear-enc-fault0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+		};
+
+		/* PCIE slot power LED */
+		led-pcieslot-power {
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 7>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+				 &pinctrl_adc10_default &pinctrl_adc11_default
+				 &pinctrl_adc12_default &pinctrl_adc13_default
+				 &pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"USERSPACE_RSTIND_BUFF","","","","","","checkstop","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","factory-reset-toggle","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"led-rtc-battery","led-bmc","led-rear-enc-id0","led-rear-enc-fault0","","","","",
+	/*I0-I7*/	"","","","","","","bmc-secure-boot","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","usb-power","","","","",
+	/*P0-P7*/	"","","","","led-pcieslot-power","","","",
+	/*Q0-Q7*/	"","","regulator-standby-faulted","","","","","",
+	/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","","I2C_FLASH_MICRO_N","","",
+	/*S0-S7*/	"","","","","power-ffs-sync-history","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","BMC_3RESTART_ATTEMPT_P","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/   "","","","","","","","";
+
+	usb-power-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	pca1: pca9552@62 {
+		compatible = "nxp,pca9552";
+		reg = <0x62>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-ps0",
+			"presence-ps1",
+			"presence-ps2",
+			"presence-ps3",
+			"presence-pdb",
+			"presence-tpm",
+			"", "",
+			"presence-cp0",
+			"presence-cp1",
+			"presence-cp2",
+			"presence-cp3",
+			"presence-dasd",
+			"presence-lcd-op",
+			"presence-base-op",
+			"";
+	};
+
+	led-controller@63 {
+		compatible = "nxp,pca9552";
+		reg = <0x63>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-vrm-c12",
+			"presence-vrm-c13",
+			"presence-vrm-c15",
+			"presence-vrm-c16",
+			"presence-vrm-c17",
+			"presence-vrm-c18",
+			"presence-vrm-c20",
+			"presence-vrm-c21",
+			"presence-vrm-c54",
+			"presence-vrm-c55",
+			"presence-vrm-c57",
+			"presence-vrm-c58",
+			"presence-vrm-c59",
+			"presence-vrm-c60",
+			"presence-vrm-c62",
+			"presence-vrm-c63";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	eeprom@54 {
+		compatible = "atmel,24c128";
+		reg = <0x54>;
+	};
+
+	power-supply@68 {
+		compatible = "ibm,cffps";
+		reg = <0x68>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps";
+		reg = <0x69>;
+	};
+
+	power-supply@6b {
+		compatible = "ibm,cffps";
+		reg = <0x6b>;
+	};
+
+	power-supply@6d {
+		compatible = "ibm,cffps";
+		reg = <0x6d>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	pca2: pca9552@65 {
+		compatible = "nxp,pca9552";
+		reg = <0x65>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-cable-card1",
+			"presence-cable-card2",
+			"presence-cable-card3",
+			"presence-cable-card4",
+			"presence-cable-card5",
+			"expander-cable-card1",
+			"expander-cable-card2",
+			"expander-cable-card3",
+			"expander-cable-card4",
+			"expander-cable-card5";
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c4mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+
+			pca_cable_card_c01: pca9551@62 {
+				compatible = "nxp,pca9551";
+				reg = <0x62>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c01-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c01-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c4mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			pca_cable_card_c02: pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c02-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c02-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c4mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			pca_cable_card_c03: pca9551@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c03-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c03-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	pca3: pca9552@66 {
+		compatible = "nxp,pca9552";
+		reg = <0x66>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-cable-card6",
+			"presence-cable-card7",
+			"presence-cable-card8",
+			"presence-cable-card9",
+			"presence-cable-card10",
+			"presence-cable-card11",
+			"expander-cable-card6",
+			"expander-cable-card7",
+			"expander-cable-card8",
+			"expander-cable-card9",
+			"expander-cable-card10",
+			"expander-cable-card11";
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c5mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			pca_cable_card_c04: pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c04-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c04-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			pca_cable_card_c05: pca9551@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c05-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c05-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+
+			pca_cable_card_c06: pca9551@62 {
+				compatible = "nxp,pca9551";
+				reg = <0x62>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c06-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c06-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+
+			pca_cable_card_c07: pca9551@63 {
+				compatible = "nxp,pca9551";
+				reg = <0x63>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c07-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c07-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c6mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			eeprom@50 {
+			compatible = "atmel,24c64";
+			reg = <0x50>;
+			};
+
+			pca_cable_card_c08: pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c08-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c08-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c6mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+
+			pca_cable_card_c09: pca9551@62 {
+				compatible = "nxp,pca9551";
+				reg = <0x62>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c09-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c09-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c6mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+
+			pca_cable_card_c10: pca9551@63 {
+				compatible = "nxp,pca9551";
+				reg = <0x63>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c10-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c10-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c6mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			pca_cable_card_c11: pca9551@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c11-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c11-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+
+	pca_pcie_slot: pca9552@65 {
+		compatible = "nxp,pca9552";
+		reg = <0x65>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@1 {
+			label = "pcieslot-c01";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "pcieslot-c02";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "pcieslot-c03";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "pcieslot-c04";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "pcieslot-c05";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "pcieslot-c06";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "pcieslot-c07";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "pcieslot-c08";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "pcieslot-c09";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "pcieslot-c10";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "pcieslot-c11";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	pic0_dimm: pca9552@31 {
+		compatible = "ibm,pca9552";
+		reg = <0x31>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "ddimm0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "ddimm1";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "ddimm2";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "ddimm3";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "ddimm4";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "ddimm5";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "ddimm6";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "ddimm7";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "ddimm8";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "ddimm9";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "ddimm10";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "ddimm11";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "ddimm12";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "ddimm13";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "ddimm14";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "ddimm15";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pic1_dimm: pca9552@32 {
+		compatible = "ibm,pca9552";
+		reg = <0x32>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "ddimm16";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "ddimm17";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "ddimm18";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "ddimm19";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "ddimm20";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "ddimm21";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "ddimm22";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "ddimm23";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "ddimm24";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "ddimm25";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "ddimm26";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "ddimm27";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "ddimm28";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "ddimm29";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "ddimm30";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "ddimm31";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pic2_dimm: pca9552@33 {
+		compatible = "ibm,pca9552";
+		reg = <0x33>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "ddimm32";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "ddimm33";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "ddimm34";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "ddimm35";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "ddimm36";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "ddimm37";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "ddimm38";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "ddimm39";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "ddimm40";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "ddimm41";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "ddimm42";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "ddimm43";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "ddimm44";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "ddimm45";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "ddimm46";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "ddimm47";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pic3_dimm: pca9552@30 {
+		compatible = "ibm,pca9552";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "ddimm48";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "ddimm49";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "ddimm50";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "ddimm51";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "ddimm52";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "ddimm53";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "ddimm54";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "ddimm55";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "ddimm56";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "ddimm57";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "ddimm58";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "ddimm59";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "ddimm60";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "ddimm61";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "ddimm62";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "ddimm63";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pic0_vrm_misc: pca9552@34 {
+		compatible = "ibm,pca9552";
+		reg = <0x34>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "planar";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "tpm";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "cpu3-c61";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "cpu0-c14";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "opencapi-connector3";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "opencapi-connector4";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "opencapi-connector5";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "vrm4";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "vrm5";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "vrm6";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "vrm7";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "vrm12";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "vrm13";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "vrm14";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "vrm15";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pic1_vrm_misc: pca9552@35 {
+		compatible = "ibm,pca9552";
+		reg = <0x35>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "dasd-backplane";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "power-distribution";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "cpu1-c19";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "cpu2-c56";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "opencapi-connector0";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "opencapi-connector1";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "opencapi-connector2";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "vrm0";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "vrm1";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "vrm2";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "vrm3";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "vrm8";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "vrm9";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "vrm10";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "vrm11";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	ucd90320@11 {
+		compatible = "ti,ucd90320";
+		reg = <0x11>;
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c8mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c8mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	tpm@2e {
+		compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
+		reg = <0x2e>;
+		memory-region = <&event_log>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c14 {
+	multi-master;
+	status = "okay";
+
+	ibm-panel@62 {
+		compatible = "ibm,op-panel";
+		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		idle-state = <1>;
+
+		i2c14mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			eeprom@51 {
+				compatible = "atmel,24c32";
+				reg = <0x51>;
+			};
+		};
+
+		i2c14mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+
+			pca_oppanel: pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "front-sys-id0";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "front-check-log0";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@2 {
+					label = "front-enc-fault1";
+					reg = <2>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@3 {
+					label = "front-sys-pwron0";
+					reg = <3>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c14mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			max31785@52 {
+				compatible = "maxim,max31785a";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x52>;
+
+				fan@0 {
+					reg = <0>;
+				};
+
+				fan@1 {
+					reg = <1>;
+				};
+
+				fan@2 {
+					reg = <2>;
+				};
+
+				fan@3 {
+					reg = <3>;
+				};
+			};
+
+			pca_fan_nvme: pca9552@60 {
+				compatible = "nxp,pca9552";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "nvme0";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "nvme1";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@2 {
+					label = "nvme2";
+					reg = <2>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@3 {
+					label = "nvme3";
+					reg = <3>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@4 {
+					label = "nvme4";
+					reg = <4>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@5 {
+					label = "nvme5";
+					reg = <5>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@6 {
+					label = "nvme6";
+					reg = <6>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@7 {
+					label = "nvme7";
+					reg = <7>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@8 {
+					label = "nvme8";
+					reg = <8>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@9 {
+					label = "nvme9";
+					reg = <9>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@10 {
+					label = "fan0";
+					reg = <10>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@11 {
+					label = "fan1";
+					reg = <11>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@12 {
+					label = "fan2";
+					reg = <12>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@13 {
+					label = "fan3";
+					reg = <13>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+
+			pca0: pca9552@61 {
+				compatible = "nxp,pca9552";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x61>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				gpio-line-names =
+					"","","","",
+					"","","","",
+					"","","","",
+					"presence-fan3",
+					"presence-fan2",
+					"presence-fan1",
+					"presence-fan0";
+			};
+		};
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c14mux1chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux1chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux1chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux1chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+&i2c15 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c15mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c15mux1chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux1chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux1chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux1chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9546";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c15mux2chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux2chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux2chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c15mux2chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&pinctrl_emmc_default {
+	bias-disable;
+};
+
+&emmc {
+	status = "okay";
+	clk-phase-mmc-hs200 = <210>, <228>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
+		 <&syscon ASPEED_CLK_MAC4RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
+
+#include "ibm-power10-quad.dtsi"
+
+&fsi_hub0 {
+	cfam@4,0 { /* DCM2_C0 */
+		reg = <4 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <4>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam4_i2c0: i2c-bus@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;	/* OM01 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom500: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo500: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c1: i2c-bus@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;	/* OM23 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom501: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo501: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c10: i2c-bus@a {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <10>;	/* OP3A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom510: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo510: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c11: i2c-bus@b {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <11>;	/* OP3B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom511: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo511: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c12: i2c-bus@c {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <12>;	/* OP4A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom512: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo512: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c13: i2c-bus@d {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <13>;	/* OP4B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom513: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo513: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c14: i2c-bus@e {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <14>;	/* OP5A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom514: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo514: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c15: i2c-bus@f {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <15>;	/* OP5B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom515: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo515: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam4_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam4_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam4_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam4_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ4: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub4: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+
+	cfam@5,0 { /* DCM2_C1 */
+		reg = <5 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <5>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam5_i2c2: i2c-bus@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;	/* OM45 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom602: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo602: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c3: i2c-bus@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;	/* OM67 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom603: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo603: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c10: i2c-bus@a {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <10>;	/* OP3A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom610: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo610: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c11: i2c-bus@b {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <11>;	/* OP3B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom611: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo611: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c14: i2c-bus@e {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <14>;	/* OP5A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom614: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo614: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c15: i2c-bus@f {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <15>;	/* OP5B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom615: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo615: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c16: i2c-bus@10 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <16>;	/* OP6A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom616: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo616: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c17: i2c-bus@11 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <17>;	/* OP6B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom617: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo617: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam5_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam5_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam5_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam5_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ5: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub5: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+
+	cfam@6,0 { /* DCM3_C0 */
+		reg = <6 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <6>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam6_i2c0: i2c-bus@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;	/* OM01 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom700: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo700: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c1: i2c-bus@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;	/* OM23 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom701: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo701: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c10: i2c-bus@a {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <10>;	/* OP3A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom710: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo710: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c11: i2c-bus@b {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <11>;	/* OP3B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom711: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo711: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c12: i2c-bus@c {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <12>;	/* OP4A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom712: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo712: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c13: i2c-bus@d {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <13>;	/* OP4B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom713: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo713: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c14: i2c-bus@e {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <14>;	/* OP5A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom714: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo714: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c15: i2c-bus@f {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <15>;	/* OP5B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom715: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo715: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam6_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam6_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam6_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam6_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ6: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub6: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+
+	cfam@7,0 { /* DCM3_C1 */
+		reg = <7 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <7>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam7_i2c2: i2c-bus@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;	/* OM45 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom802: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo802: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c3: i2c-bus@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;	/* OM67 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom803: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo803: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c10: i2c-bus@a {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <10>;	/* OP3A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom810: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo810: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c11: i2c-bus@b {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <11>;	/* OP3B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom811: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo811: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c14: i2c-bus@e {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <14>;	/* OP5A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom814: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo814: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c15: i2c-bus@f {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <15>;	/* OP5B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom815: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo815: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c16: i2c-bus@10 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <16>;	/* OP6A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom816: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo816: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c17: i2c-bus@11 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <17>;	/* OP6B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom817: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo817: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam7_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam7_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam7_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam7_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ7: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub7: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+};
+
+/* Legacy OCC numbering (to get rid of when userspace is fixed) */
+&fsi_occ4 {
+	reg = <5>;
+};
+
+&fsi_occ5 {
+	reg = <6>;
+};
+
+&fsi_occ6 {
+	reg = <7>;
+};
+
+&fsi_occ7 {
+	reg = <8>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts
new file mode 100644
index 000000000000..9a43fc7bcebe
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts
@@ -0,0 +1,3903 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2024 IBM Corp.
+/dts-v1/;
+
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include "aspeed-g6.dtsi"
+#include "ibm-power11-quad.dtsi"
+
+/ {
+	model = "Fuji";
+	compatible = "ibm,fuji-bmc", "aspeed,ast2600";
+
+	aliases {
+		i2c500 = &cfam4_i2c0;
+		i2c501 = &cfam4_i2c1;
+		i2c510 = &cfam4_i2c10;
+		i2c511 = &cfam4_i2c11;
+		i2c512 = &cfam4_i2c12;
+		i2c513 = &cfam4_i2c13;
+		i2c514 = &cfam4_i2c14;
+		i2c515 = &cfam4_i2c15;
+		i2c602 = &cfam5_i2c2;
+		i2c603 = &cfam5_i2c3;
+		i2c610 = &cfam5_i2c10;
+		i2c611 = &cfam5_i2c11;
+		i2c614 = &cfam5_i2c14;
+		i2c615 = &cfam5_i2c15;
+		i2c616 = &cfam5_i2c16;
+		i2c617 = &cfam5_i2c17;
+		i2c700 = &cfam6_i2c0;
+		i2c701 = &cfam6_i2c1;
+		i2c710 = &cfam6_i2c10;
+		i2c711 = &cfam6_i2c11;
+		i2c712 = &cfam6_i2c12;
+		i2c713 = &cfam6_i2c13;
+		i2c714 = &cfam6_i2c14;
+		i2c715 = &cfam6_i2c15;
+		i2c802 = &cfam7_i2c2;
+		i2c803 = &cfam7_i2c3;
+		i2c810 = &cfam7_i2c10;
+		i2c811 = &cfam7_i2c11;
+		i2c814 = &cfam7_i2c14;
+		i2c815 = &cfam7_i2c15;
+		i2c816 = &cfam7_i2c16;
+		i2c817 = &cfam7_i2c17;
+
+		i2c16 = &i2c4mux0chn0;
+		i2c17 = &i2c4mux0chn1;
+		i2c18 = &i2c4mux0chn2;
+		i2c19 = &i2c5mux0chn0;
+		i2c20 = &i2c5mux0chn1;
+		i2c21 = &i2c5mux0chn2;
+		i2c22 = &i2c5mux0chn3;
+		i2c23 = &i2c6mux0chn0;
+		i2c24 = &i2c6mux0chn1;
+		i2c25 = &i2c6mux0chn2;
+		i2c26 = &i2c6mux0chn3;
+		i2c27 = &i2c14mux0chn0;
+		i2c28 = &i2c14mux0chn1;
+		i2c29 = &i2c14mux0chn2;
+		i2c30 = &i2c14mux0chn3;
+		i2c31 = &i2c14mux1chn0;
+		i2c32 = &i2c14mux1chn1;
+		i2c33 = &i2c14mux1chn2;
+		i2c34 = &i2c14mux1chn3;
+		i2c35 = &i2c15mux0chn0;
+		i2c36 = &i2c15mux0chn1;
+		i2c37 = &i2c15mux0chn2;
+		i2c38 = &i2c15mux0chn3;
+		i2c39 = &i2c15mux1chn0;
+		i2c40 = &i2c15mux1chn1;
+		i2c41 = &i2c15mux1chn2;
+		i2c42 = &i2c15mux1chn3;
+		i2c43 = &i2c15mux2chn0;
+		i2c44 = &i2c15mux2chn1;
+		i2c45 = &i2c15mux2chn2;
+		i2c46 = &i2c15mux2chn3;
+		i2c47 = &i2c8mux0chn0;
+		i2c48 = &i2c8mux0chn1;
+
+		serial4 = &uart5;
+
+		sbefifo500 = &sbefifo500;
+		sbefifo501 = &sbefifo501;
+		sbefifo510 = &sbefifo510;
+		sbefifo511 = &sbefifo511;
+		sbefifo512 = &sbefifo512;
+		sbefifo513 = &sbefifo513;
+		sbefifo514 = &sbefifo514;
+		sbefifo515 = &sbefifo515;
+		sbefifo602 = &sbefifo602;
+		sbefifo603 = &sbefifo603;
+		sbefifo610 = &sbefifo610;
+		sbefifo611 = &sbefifo611;
+		sbefifo614 = &sbefifo614;
+		sbefifo615 = &sbefifo615;
+		sbefifo616 = &sbefifo616;
+		sbefifo617 = &sbefifo617;
+		sbefifo700 = &sbefifo700;
+		sbefifo701 = &sbefifo701;
+		sbefifo710 = &sbefifo710;
+		sbefifo711 = &sbefifo711;
+		sbefifo712 = &sbefifo712;
+		sbefifo713 = &sbefifo713;
+		sbefifo714 = &sbefifo714;
+		sbefifo715 = &sbefifo715;
+		sbefifo802 = &sbefifo802;
+		sbefifo803 = &sbefifo803;
+		sbefifo810 = &sbefifo810;
+		sbefifo811 = &sbefifo811;
+		sbefifo814 = &sbefifo814;
+		sbefifo815 = &sbefifo815;
+		sbefifo816 = &sbefifo816;
+		sbefifo817 = &sbefifo817;
+
+		scom500 = &scom500;
+		scom501 = &scom501;
+		scom510 = &scom510;
+		scom511 = &scom511;
+		scom512 = &scom512;
+		scom513 = &scom513;
+		scom514 = &scom514;
+		scom515 = &scom515;
+		scom602 = &scom602;
+		scom603 = &scom603;
+		scom610 = &scom610;
+		scom611 = &scom611;
+		scom614 = &scom614;
+		scom615 = &scom615;
+		scom616 = &scom616;
+		scom617 = &scom617;
+		scom700 = &scom700;
+		scom701 = &scom701;
+		scom710 = &scom710;
+		scom711 = &scom711;
+		scom712 = &scom712;
+		scom713 = &scom713;
+		scom714 = &scom714;
+		scom715 = &scom715;
+		scom802 = &scom802;
+		scom803 = &scom803;
+		scom810 = &scom810;
+		scom811 = &scom811;
+		scom814 = &scom814;
+		scom815 = &scom815;
+		scom816 = &scom816;
+		scom817 = &scom817;
+
+		spi50 = &cfam4_spi0;
+		spi51 = &cfam4_spi1;
+		spi52 = &cfam4_spi2;
+		spi53 = &cfam4_spi3;
+		spi60 = &cfam5_spi0;
+		spi61 = &cfam5_spi1;
+		spi62 = &cfam5_spi2;
+		spi63 = &cfam5_spi3;
+		spi70 = &cfam6_spi0;
+		spi71 = &cfam6_spi1;
+		spi72 = &cfam6_spi2;
+		spi73 = &cfam6_spi3;
+		spi80 = &cfam7_spi0;
+		spi81 = &cfam7_spi1;
+		spi82 = &cfam7_spi2;
+		spi83 = &cfam7_spi3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		event_log: region@b3d00000 {
+			reg = <0xb3d00000 0x100000>;
+			no-map;
+		};
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>; /* KMSG_DUMP_EMERG */
+		};
+
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			reg = <0xb4000000 0x04000000>; /* 64M */
+			no-map;
+		};
+
+		/* VGA region is dictated by hardware strapping */
+		vga_memory: region@bf000000 {
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>; /* 16M */
+			no-map;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-fan0-presence {
+			gpios = <&pca0 15 GPIO_ACTIVE_LOW>;
+			label = "fan0-presence";
+			linux,code = <15>;
+		};
+
+		event-fan1-presence {
+			gpios = <&pca0 14 GPIO_ACTIVE_LOW>;
+			label = "fan1-presence";
+			linux,code = <14>;
+		};
+
+		event-fan2-presence {
+			gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
+			label = "fan2-presence";
+			linux,code = <13>;
+		};
+
+		event-fan3-presence {
+			gpios = <&pca0 12 GPIO_ACTIVE_LOW>;
+			label = "fan3-presence";
+			linux,code = <12>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* RTC battery fault LED at the back */
+		led-rtc-battery {
+			gpios = <&gpio0 ASPEED_GPIO(H, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		/* BMC Card fault LED at the back */
+		led-bmc {
+			gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure Identify LED at the back */
+		led-rear-enc-id0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure fault LED at the back */
+		led-rear-enc-fault0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+		};
+
+		/* PCIE slot power LED */
+		led-pcieslot-power {
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 7>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+				 &pinctrl_adc10_default &pinctrl_adc11_default
+				 &pinctrl_adc12_default &pinctrl_adc13_default
+				 &pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"bmc-management-ready","","","","","","checkstop","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","",
+			"factory-reset-toggle","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"led-rtc-battery","led-bmc","led-rear-enc-id0","led-rear-enc-fault0","","",
+			"","",
+	/*I0-I7*/	"","","","","","","bmc-secure-boot","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","usb-power","","","","",
+	/*P0-P7*/	"","","","","led-pcieslot-power","","","",
+	/*Q0-Q7*/	"","","regulator-standby-faulted","","","","","",
+	/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","",
+			"I2C_FLASH_MICRO_N","","",
+	/*S0-S7*/	"","","","","power-ffs-sync-history","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","BMC_3RESTART_ATTEMPT_P","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+
+	usb-power-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	led-controller@62 {
+		compatible = "nxp,pca9552";
+		reg = <0x62>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-ps0",
+			"presence-ps1",
+			"presence-ps2",
+			"presence-ps3",
+			"presence-pdb",
+			"presence-tpm",
+			"", "",
+			"presence-cp0",
+			"presence-cp1",
+			"presence-cp2",
+			"presence-cp3",
+			"presence-dasd",
+			"presence-lcd-op",
+			"presence-base-op",
+			"";
+	};
+
+	led-controller@63 {
+		compatible = "nxp,pca9552";
+		reg = <0x63>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-vrm-c12",
+			"presence-vrm-c13",
+			"presence-vrm-c15",
+			"presence-vrm-c16",
+			"presence-vrm-c17",
+			"presence-vrm-c18",
+			"presence-vrm-c20",
+			"presence-vrm-c21",
+			"presence-vrm-c54",
+			"presence-vrm-c55",
+			"presence-vrm-c57",
+			"presence-vrm-c58",
+			"presence-vrm-c59",
+			"presence-vrm-c60",
+			"presence-vrm-c62",
+			"presence-vrm-c63";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	eeprom@54 {
+		compatible = "atmel,24c128";
+		reg = <0x54>;
+	};
+
+	power-supply@68 {
+		compatible = "ibm,cffps";
+		reg = <0x68>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps";
+		reg = <0x69>;
+	};
+
+	power-supply@6b {
+		compatible = "ibm,cffps";
+		reg = <0x6b>;
+	};
+
+	power-supply@6d {
+		compatible = "ibm,cffps";
+		reg = <0x6d>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	led-controller@65 {
+		compatible = "nxp,pca9552";
+		reg = <0x65>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-cable-card1",
+			"presence-cable-card2",
+			"presence-cable-card3",
+			"presence-cable-card4",
+			"presence-cable-card5",
+			"expander-cable-card1",
+			"expander-cable-card2",
+			"expander-cable-card3",
+			"expander-cable-card4",
+			"expander-cable-card5";
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c4mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+
+			led-controller@62 {
+				compatible = "nxp,pca9551";
+				reg = <0x62>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c01-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c01-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c4mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			led-controller@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c02-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c02-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c4mux0chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			led-controller@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c03-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c03-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	led-controller@66 {
+		compatible = "nxp,pca9552";
+		reg = <0x66>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-cable-card6",
+			"presence-cable-card7",
+			"presence-cable-card8",
+			"presence-cable-card9",
+			"presence-cable-card10",
+			"presence-cable-card11",
+			"expander-cable-card6",
+			"expander-cable-card7",
+			"expander-cable-card8",
+			"expander-cable-card9",
+			"expander-cable-card10",
+			"expander-cable-card11";
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c5mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			led-controller@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c04-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c04-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			led-controller@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c05-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c05-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+
+			led-controller@62 {
+				compatible = "nxp,pca9551";
+				reg = <0x62>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c06-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c06-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+
+			led-controller@63 {
+				compatible = "nxp,pca9551";
+				reg = <0x63>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c07-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c07-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c6mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			led-controller@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c08-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c08-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c6mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+
+			led-controller@62 {
+				compatible = "nxp,pca9551";
+				reg = <0x62>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c09-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c09-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c6mux0chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+
+			led-controller@63 {
+				compatible = "nxp,pca9551";
+				reg = <0x63>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c10-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c10-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c6mux0chn3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			led-controller@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c11-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c11-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+
+	led-controller@65 {
+		compatible = "nxp,pca9552";
+		reg = <0x65>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "pcieslot-c01";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "pcieslot-c02";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "pcieslot-c03";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "pcieslot-c04";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "pcieslot-c05";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "pcieslot-c06";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "pcieslot-c07";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "pcieslot-c08";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "pcieslot-c09";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "pcieslot-c10";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "pcieslot-c11";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	led-controller@31 {
+		compatible = "ibm,pca9552";
+		reg = <0x31>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "ddimm0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "ddimm1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "ddimm2";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "ddimm3";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "ddimm4";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "ddimm5";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "ddimm6";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "ddimm7";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "ddimm8";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "ddimm9";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "ddimm10";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "ddimm11";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@c {
+			reg = <12>;
+			default-state = "keep";
+			label = "ddimm12";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@d {
+			reg = <13>;
+			default-state = "keep";
+			label = "ddimm13";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@e {
+			reg = <14>;
+			default-state = "keep";
+			label = "ddimm14";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@f {
+			reg = <15>;
+			default-state = "keep";
+			label = "ddimm15";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	led-controller@32 {
+		compatible = "ibm,pca9552";
+		reg = <0x32>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "ddimm16";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "ddimm17";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "ddimm18";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "ddimm19";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "ddimm20";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "ddimm21";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "ddimm22";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "ddimm23";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "ddimm24";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "ddimm25";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "ddimm26";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "ddimm27";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@c {
+			reg = <12>;
+			default-state = "keep";
+			label = "ddimm28";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@d {
+			reg = <13>;
+			default-state = "keep";
+			label = "ddimm29";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@e {
+			reg = <14>;
+			default-state = "keep";
+			label = "ddimm30";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@f {
+			reg = <15>;
+			default-state = "keep";
+			label = "ddimm31";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	led-controller@33 {
+		compatible = "ibm,pca9552";
+		reg = <0x33>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "ddimm32";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "ddimm33";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "ddimm34";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "ddimm35";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "ddimm36";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "ddimm37";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "ddimm38";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "ddimm39";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "ddimm40";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "ddimm41";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "ddimm42";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "ddimm43";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@c {
+			reg = <12>;
+			default-state = "keep";
+			label = "ddimm44";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@d {
+			reg = <13>;
+			default-state = "keep";
+			label = "ddimm45";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@e {
+			reg = <14>;
+			default-state = "keep";
+			label = "ddimm46";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@f {
+			reg = <15>;
+			default-state = "keep";
+			label = "ddimm47";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	led-controller@30 {
+		compatible = "ibm,pca9552";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "ddimm48";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "ddimm49";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "ddimm50";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "ddimm51";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "ddimm52";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "ddimm53";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "ddimm54";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "ddimm55";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "ddimm56";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "ddimm57";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "ddimm58";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "ddimm59";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@c {
+			reg = <12>;
+			default-state = "keep";
+			label = "ddimm60";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@d {
+			reg = <13>;
+			default-state = "keep";
+			label = "ddimm61";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@e {
+			reg = <14>;
+			default-state = "keep";
+			label = "ddimm62";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@f {
+			reg = <15>;
+			default-state = "keep";
+			label = "ddimm63";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	led-controller@34 {
+		compatible = "ibm,pca9552";
+		reg = <0x34>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "planar";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "tpm";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "cpu3-c61";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "cpu0-c14";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "opencapi-connector3";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "opencapi-connector4";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "opencapi-connector5";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "vrm4";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "vrm5";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "vrm6";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "vrm7";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@c {
+			reg = <12>;
+			default-state = "keep";
+			label = "vrm12";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@d {
+			reg = <13>;
+			default-state = "keep";
+			label = "vrm13";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@e {
+			reg = <14>;
+			default-state = "keep";
+			label = "vrm14";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@f {
+			reg = <15>;
+			default-state = "keep";
+			label = "vrm15";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	led-controller@35 {
+		compatible = "ibm,pca9552";
+		reg = <0x35>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "dasd-backplane";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "power-distribution";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "cpu1-c19";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "cpu2-c56";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "opencapi-connector0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "opencapi-connector1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "opencapi-connector2";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "vrm0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "vrm1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "vrm2";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "vrm3";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@c {
+			reg = <12>;
+			default-state = "keep";
+			label = "vrm8";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@d {
+			reg = <13>;
+			default-state = "keep";
+			label = "vrm9";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@e {
+			reg = <14>;
+			default-state = "keep";
+			label = "vrm10";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@f {
+			reg = <15>;
+			default-state = "keep";
+			label = "vrm11";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	pmic@11 {
+		compatible = "ti,ucd90320";
+		reg = <0x11>;
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+		reset-gpio = <&gpio0 ASPEED_GPIO(S, 5) GPIO_ACTIVE_LOW>;
+
+		i2c8mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c8mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	tpm@2e {
+		compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
+		reg = <0x2e>;
+		memory-region = <&event_log>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c14 {
+	multi-master;
+	status = "okay";
+
+	lcd-controller@62 {
+		compatible = "ibm,op-panel";
+		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		idle-state = <1>;
+
+		i2c14mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@51 {
+				compatible = "atmel,24c32";
+				reg = <0x51>;
+			};
+		};
+
+		i2c14mux0chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+
+			led-controller@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "front-sys-id0";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "front-check-log0";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@2 {
+					reg = <2>;
+					default-state = "keep";
+					label = "front-enc-fault1";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@3 {
+					reg = <3>;
+					default-state = "keep";
+					label = "front-sys-pwron0";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c14mux0chn3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pwm@52 {
+				compatible = "maxim,max31785a";
+				reg = <0x52>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			led-controller@60 {
+				compatible = "nxp,pca9552";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "nvme0";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "nvme1";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@2 {
+					reg = <2>;
+					default-state = "keep";
+					label = "nvme2";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@3 {
+					reg = <3>;
+					default-state = "keep";
+					label = "nvme3";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@4 {
+					reg = <4>;
+					default-state = "keep";
+					label = "nvme4";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@5 {
+					reg = <5>;
+					default-state = "keep";
+					label = "nvme5";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@6 {
+					reg = <6>;
+					default-state = "keep";
+					label = "nvme6";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@7 {
+					reg = <7>;
+					default-state = "keep";
+					label = "nvme7";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@8 {
+					reg = <8>;
+					default-state = "keep";
+					label = "nvme8";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@9 {
+					reg = <9>;
+					default-state = "keep";
+					label = "nvme9";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@a {
+					reg = <10>;
+					default-state = "keep";
+					label = "fan0";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@b {
+					reg = <11>;
+					default-state = "keep";
+					label = "fan1";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@c {
+					reg = <12>;
+					default-state = "keep";
+					label = "fan2";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@d {
+					reg = <13>;
+					default-state = "keep";
+					label = "fan3";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+
+			pca0: led-controller@61 {
+				compatible = "nxp,pca9552";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x61>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				gpio-line-names =
+					"","","","",
+					"","","","",
+					"","","","",
+					"presence-fan3",
+					"presence-fan2",
+					"presence-fan1",
+					"presence-fan0";
+			};
+		};
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c14mux1chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux1chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux1chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux1chn3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+&i2c15 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c15mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux0chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux0chn3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c15mux1chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux1chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux1chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux1chn3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9546";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c15mux2chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux2chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux2chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c15mux2chn3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&pinctrl_emmc_default {
+	bias-disable;
+};
+
+&emmc {
+	status = "okay";
+	clk-phase-mmc-hs200 = <210>, <228>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
+		 <&syscon ASPEED_CLK_MAC4RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&fsi_hub0 {
+	cfam@4,0 { /* DCM2_C0 */
+		reg = <4 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <4>;
+
+		scom@1000 {
+			compatible = "ibm,p9-scom";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,i2c-fsi";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam4_i2c0: i2c-bus@0 {
+				reg = <0>;	/* OM01 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom500: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo500: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c1: i2c-bus@1 {
+				reg = <1>;	/* OM23 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom501: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo501: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom510: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo510: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom511: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo511: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c12: i2c-bus@c {
+				reg = <12>;	/* OP4A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom512: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo512: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c13: i2c-bus@d {
+				reg = <13>;	/* OP4B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom513: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo513: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom514: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo514: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom515: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo515: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam4_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam4_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam4_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam4_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+
+			occ {
+				compatible = "ibm,p10-occ";
+
+				hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi@3400 {
+			compatible = "ibm,p9-fsi-controller";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			no-scan-on-init;
+		};
+	};
+
+	cfam@5,0 { /* DCM2_C1 */
+		reg = <5 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <5>;
+
+		scom@1000 {
+			compatible = "ibm,p9-scom";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,i2c-fsi";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam5_i2c2: i2c-bus@2 {
+				reg = <2>;	/* OM45 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom602: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo602: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c3: i2c-bus@3 {
+				reg = <3>;	/* OM67 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom603: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo603: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom610: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo610: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom611: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo611: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom614: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo614: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom615: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo615: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c16: i2c-bus@10 {
+				reg = <16>;	/* OP6A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom616: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo616: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c17: i2c-bus@11 {
+				reg = <17>;	/* OP6B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom617: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo617: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam5_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam5_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam5_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam5_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+
+			occ {
+				compatible = "ibm,p10-occ";
+
+				hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi@3400 {
+			compatible = "ibm,p9-fsi-controller";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			no-scan-on-init;
+		};
+	};
+
+	cfam@6,0 { /* DCM3_C0 */
+		reg = <6 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <6>;
+
+		scom@1000 {
+			compatible = "ibm,p9-scom";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,i2c-fsi";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam6_i2c0: i2c-bus@0 {
+				reg = <0>;	/* OM01 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom700: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo700: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c1: i2c-bus@1 {
+				reg = <1>;	/* OM23 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom701: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo701: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom710: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo710: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom711: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo711: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c12: i2c-bus@c {
+				reg = <12>;	/* OP4A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom712: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo712: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c13: i2c-bus@d {
+				reg = <13>;	/* OP4B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom713: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo713: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom714: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo714: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom715: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo715: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam6_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam6_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam6_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam6_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+
+			occ {
+				compatible = "ibm,p10-occ";
+
+				hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi@3400 {
+			compatible = "ibm,p9-fsi-controller";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			no-scan-on-init;
+		};
+	};
+
+	cfam@7,0 { /* DCM3_C1 */
+		reg = <7 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <7>;
+
+		scom@1000 {
+			compatible = "ibm,p9-scom";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,i2c-fsi";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam7_i2c2: i2c-bus@2 {
+				reg = <2>;	/* OM45 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom802: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo802: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c3: i2c-bus@3 {
+				reg = <3>;	/* OM67 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom803: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo803: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom810: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo810: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom811: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo811: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom814: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo814: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom815: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo815: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c16: i2c-bus@10 {
+				reg = <16>;	/* OP6A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom816: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo816: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c17: i2c-bus@11 {
+				reg = <17>;	/* OP6B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom817: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo817: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam7_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam7_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam7_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam7_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+
+			occ {
+				compatible = "ibm,p10-occ";
+
+				hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi@3400 {
+			compatible = "ibm,p9-fsi-controller";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			no-scan-on-init;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-1s4u.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-1s4u.dts
index f5f5b18c113a..f5f5b18c113a 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-1s4u.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-1s4u.dts
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-4u.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-4u.dts
index 342546a3c0f5..342546a3c0f5 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-4u.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-4u.dts
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts
new file mode 100644
index 000000000000..e90421bf7e3a
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts
@@ -0,0 +1,1725 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2019 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Rainier 2U";
+	compatible = "ibm,rainier-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+		i2c16 = &i2c2mux0;
+		i2c17 = &i2c2mux1;
+		i2c18 = &i2c2mux2;
+		i2c19 = &i2c2mux3;
+		i2c20 = &i2c4mux0chn0;
+		i2c21 = &i2c4mux0chn1;
+		i2c22 = &i2c4mux0chn2;
+		i2c23 = &i2c5mux0chn0;
+		i2c24 = &i2c5mux0chn1;
+		i2c25 = &i2c6mux0chn0;
+		i2c26 = &i2c6mux0chn1;
+		i2c27 = &i2c6mux0chn2;
+		i2c28 = &i2c6mux0chn3;
+		i2c29 = &i2c11mux0chn0;
+		i2c30 = &i2c11mux0chn1;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>; /* KMSG_DUMP_EMERG */
+		};
+
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			no-map;
+			reg = <0xb4000000 0x04000000>; /* 64M */
+		};
+
+		/* VGA region is dictated by hardware strapping */
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;  /* 16M */
+		};
+	};
+
+	i2c2mux: i2cmux {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		i2c-parent = <&i2c2>;
+		mux-gpios = <&gpio0 ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>,
+			    <&gpio0 ASPEED_GPIO(G, 5) GPIO_ACTIVE_HIGH>;
+		idle-state = <0>;
+
+		i2c2mux0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c2mux1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c2mux2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c2mux3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* BMC Card fault LED at the back */
+		led-bmc-ingraham0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure ID LED at the back */
+		led-rear-enc-id0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure fault LED at the back */
+		led-rear-enc-fault0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+		};
+
+		/* PCIE slot power LED */
+		led-pcieslot-power {
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		event-fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+
+		event-fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
+			linux,code = <8>;
+		};
+
+		event-fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
+			linux,code = <9>;
+		};
+
+		event-fan4-presence {
+			label = "fan4-presence";
+			gpios = <&pca0 10 GPIO_ACTIVE_LOW>;
+			linux,code = <10>;
+		};
+
+		event-fan5-presence {
+			label = "fan5-presence";
+			gpios = <&pca0 11 GPIO_ACTIVE_LOW>;
+			linux,code = <11>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 7>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"","","","","","","checkstop","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","factory-reset-toggle","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","led-bmc-ingraham0","led-rear-enc-id0","led-rear-enc-fault0","","","","",
+	/*I0-I7*/	"","","","","","","bmc-secure-boot","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","usb-power","","","","",
+	/*P0-P7*/	"","","","","led-pcieslot-power","","","",
+	/*Q0-Q7*/	"cfam-reset","","regulator-standby-faulted","","","","","",
+	/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","","",
+	/*S0-S7*/	"presence-ps0","presence-ps1","presence-ps2","presence-ps3",
+	"power-ffs-sync-history","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+
+	i2c3-mux-oe-n-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 6) GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "I2C3_MUX_OE_N";
+	};
+
+	usb-power-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&pinctrl_emmc_default {
+	bias-disable;
+};
+
+&emmc {
+	status = "okay";
+	clk-phase-mmc-hs200 = <180>, <180>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	tca_pres1: tca9554@20 {
+		compatible = "ti,tca9554";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "",
+			"RUSSEL_FW_I2C_ENABLE_N",
+			"RUSSEL_OPPANEL_PRESENCE_N",
+			"BLYTH_OPPANEL_PRESENCE_N",
+			"CPU_TPM_CARD_PRESENT_N",
+			"DASD_BP2_PRESENT_N",
+			"DASD_BP1_PRESENT_N",
+			"DASD_BP0_PRESENT_N";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	power-supply@68 {
+		compatible = "ibm,cffps";
+		reg = <0x68>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps";
+		reg = <0x69>;
+	};
+
+	pca_pres1: pca9552@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"SLOT0_PRSNT_EN_RSVD", "SLOT1_PRSNT_EN_RSVD",
+			"SLOT2_PRSNT_EN_RSVD", "SLOT3_PRSNT_EN_RSVD",
+			"SLOT4_PRSNT_EN_RSVD", "SLOT0_EXPANDER_PRSNT_N",
+			"SLOT1_EXPANDER_PRSNT_N", "SLOT2_EXPANDER_PRSNT_N",
+			"SLOT3_EXPANDER_PRSNT_N", "SLOT4_EXPANDER_PRSNT_N",
+			"", "", "", "", "", "";
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@49 {
+		compatible = "ti,tmp275";
+		reg = <0x49>;
+	};
+
+	tmp275@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c4mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard0-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard0-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c4mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+
+		i2c4mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@49 {
+		compatible = "ti,tmp275";
+		reg = <0x49>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c5mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard3-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard3-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			pca9551@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard4-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard4-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+
+	tmp275@4b {
+		compatible = "ti,tmp275";
+		reg = <0x4b>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c6mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c6mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+		};
+
+		i2c6mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		i2c6mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+&i2c7 {
+	multi-master;
+	status = "okay";
+
+	pca9552@30 {
+		compatible = "ibm,pca9552";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "pcieslot0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "pcieslot1";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "pcieslot2";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "pcieslot3";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "pcieslot4";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "cpu1";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "cpu-vrm1";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "lcd-russel";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pca9552@31 {
+		compatible = "ibm,pca9552";
+		reg = <0x31>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "ddimm0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "ddimm1";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "ddimm2";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "ddimm3";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "ddimm4";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "ddimm5";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "ddimm6";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "ddimm7";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "ddimm8";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "ddimm9";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "ddimm10";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "ddimm11";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "ddimm12";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "ddimm13";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "ddimm14";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "ddimm15";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pca9552@32 {
+		compatible = "ibm,pca9552";
+		reg = <0x32>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "ddimm16";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "ddimm17";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "ddimm18";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "ddimm19";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "ddimm20";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "ddimm21";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "ddimm22";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "ddimm23";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "ddimm24";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "ddimm25";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "ddimm26";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "ddimm27";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "ddimm28";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "ddimm29";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "ddimm30";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "ddimm31";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pca9552@33 {
+		compatible = "ibm,pca9552";
+		reg = <0x33>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "planar";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "cpu0";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "dasd-pyramid0";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "dasd-pyramid1";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "dasd-pyramid2";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "cpu0-vrm0";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "rtc-battery";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "base-blyth";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "pcieslot6";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "pcieslot7";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "pcieslot8";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "pcieslot9";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "pcieslot10";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "pcieslot11";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "tpm-wilson";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	si7021-a20@40 {
+		compatible = "silabs,si7020";
+		reg = <0x40>;
+	};
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	max: max31785@52 {
+		compatible = "maxim,max31785a";
+		reg = <0x52>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan0: fan@0 {
+			reg = <0>;
+		};
+
+		fan1: fan@1 {
+			reg = <1>;
+		};
+
+		fan2: fan@2 {
+			reg = <2>;
+		};
+
+		fan3: fan@3 {
+			reg = <3>;
+		};
+
+		fan4: fan@4 {
+			reg = <4>;
+		};
+
+		fan5: fan@5 {
+			reg = <5>;
+		};
+	};
+
+	pca9551@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "front-sys-id0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "front-check-log0";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "front-enc-fault1";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "front-sys-pwron0";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pca0: pca9552@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "fan0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "fan1";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "fan2";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "fan3";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "fan4";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "fan5";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	ibm-panel@62 {
+		compatible = "ibm,op-panel";
+		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	dps: dps310@76 {
+		compatible = "infineon,dps310";
+		reg = <0x76>;
+		#io-channel-cells = <0>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	ucd90320@11 {
+		compatible = "ti,ucd90320";
+		reg = <0x11>;
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	pca_pres3: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"", "", "", "", "", "", "P10_DCM0_PRES", "P10_DCM1_PRES",
+			"", "", "", "", "PRESENT_VRM_DCM0_N", "PRESENT_VRM_DCM1_N",
+			"power-config-full-load", "";
+	};
+
+	pca_pres2: pca9552@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"SLOT6_PRSNT_EN_RSVD", "SLOT7_PRSNT_EN_RSVD",
+			"SLOT8_PRSNT_EN_RSVD", "SLOT9_PRSNT_EN_RSVD",
+			"SLOT10_PRSNT_EN_RSVD", "SLOT11_PRSNT_EN_RSVD",
+			"SLOT6_EXPANDER_PRSNT_N", "SLOT7_EXPANDER_PRSNT_N",
+			"SLOT8_EXPANDER_PRSNT_N", "SLOT9_EXPANDER_PRSNT_N",
+			"SLOT10_EXPANDER_PRSNT_N", "SLOT11_EXPANDER_PRSNT_N",
+			"", "", "", "";
+	};
+
+};
+
+&i2c9 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	tmp423b@4d {
+		compatible = "ti,tmp423";
+		reg = <0x4d>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	tmp423b@4d {
+		compatible = "ti,tmp423";
+		reg = <0x4d>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@49 {
+		compatible = "ti,tmp275";
+		reg = <0x49>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c11mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard10-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard10-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c11mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "nvme0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "nvme1";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "nvme2";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "nvme3";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "nvme4";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "nvme5";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "nvme6";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "nvme7";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c14 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "nvme8";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "nvme9";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "nvme10";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "nvme11";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "nvme12";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "nvme13";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "nvme14";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "nvme15";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c15 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "nvme16";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "nvme17";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "nvme18";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "nvme19";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "nvme20";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "nvme21";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "nvme22";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "nvme23";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
+		 <&syscon ASPEED_CLK_MAC4RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
+
+#include "ibm-power10-quad.dtsi"
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts
new file mode 100644
index 000000000000..dbadba8eb698
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts
@@ -0,0 +1,6086 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2024 IBM Corp.
+/dts-v1/;
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/i2c/i2c.h>
+#include "aspeed-g6.dtsi"
+
+/ {
+	model = "IBM SBP1";
+	compatible = "ibm,sbp1-bmc", "aspeed,ast2600";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			label = "LED_BMC_READY";
+			gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			retain-state-suspended;
+			panic-indicator;
+		};
+
+		led-id-tpm {
+			label = "LED_ID_TPM";
+			gpios = <&smb_pex_vr_ctrl 12 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-bat {
+			label = "LED_ID_BAT";
+			gpios = <&smb_pex_vr_ctrl 16 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-mgmt-port2 {
+			label = "LED_ID_MGMT_PORT2";
+			gpios = <&smb_pex_vr_ctrl 17 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-mgmt-port1 {
+			label = "LED_ID_MGMT_PORT1";
+			gpios = <&smb_pex_vr_ctrl 18 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-nic1-port1 {
+			label = "LED_ID_NIC1_PORT1";
+			gpios = <&smb_pex_vr_ctrl 22 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-nic1-port2 {
+			label = "LED_ID_NIC1_PORT2";
+			gpios = <&smb_pex_vr_ctrl 23 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-nic2-port1 {
+			label = "LED_ID_NIC2_PORT1";
+			gpios = <&smb_pex_vr_ctrl 24 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-nic2-port2 {
+			label = "LED_ID_NIC2_PORT2";
+			gpios = <&smb_pex_vr_ctrl 25 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-m2-ssd2 {
+			label = "LED_ID_M2_SSD2";
+			gpios = <&smb_pex_vr_ctrl 36 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-m2-ssd1 {
+			label = "LED_ID_M2_SSD1";
+			gpios = <&smb_pex_vr_ctrl 37 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dwr-frnt-p {
+			label = "LED_ID_DWR_FRNT_P";
+			gpios = <&smb_svc_pex_cpu3_led 37 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_BLUE>;
+
+			default-state = "on";
+			retain-state-suspended;
+			retain-state-shutdown;
+		};
+
+		led-pwr-dwr-frnt {
+			label = "LED_PWR_DWR_FRNT";
+			gpios = <&smb_svc_pex_cpu3_led 36 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_GREEN>;
+
+			retain-state-suspended;
+			retain-state-shutdown;
+		};
+
+		led-pwr-dwr-back {
+			label = "LED_PWR_DWR_BACK";
+			gpios = <&smb_pex_vr_ctrl 34 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_GREEN>;
+
+			retain-state-suspended;
+			retain-state-shutdown;
+		};
+
+		led-id-dwr-back-p {
+			label = "LED_ID_DWR_BACK_P";
+			gpios = <&smb_pex_vr_ctrl 35 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_BLUE>;
+
+			default-state = "on";
+			retain-state-suspended;
+			retain-state-shutdown;
+		};
+
+		led-id-cpu0 {
+			label = "LED_ID_CPU0";
+			gpios = <&smb_svc_pex_cpu0_led 39 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-cpu1 {
+			label = "LED_ID_CPU1";
+			gpios = <&smb_svc_pex_cpu1_led 39 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-cpu2 {
+			label = "LED_ID_CPU2";
+			gpios = <&smb_svc_pex_cpu2_led 39 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-cpu3 {
+			label = "LED_ID_CPU3";
+			gpios = <&smb_svc_pex_cpu3_led 39 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0e2 {
+			label = "LED_ID_DIMM_C0E2";
+			gpios = <&smb_svc_pex_cpu0_led 20 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0e1 {
+			label = "LED_ID_DIMM_C0E1";
+			gpios = <&smb_svc_pex_cpu0_led 21 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0f2 {
+			label = "LED_ID_DIMM_C0F2";
+			gpios = <&smb_svc_pex_cpu0_led 22 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0f1 {
+			label = "LED_ID_DIMM_C0F1";
+			gpios = <&smb_svc_pex_cpu0_led 23 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0g2 {
+			label = "LED_ID_DIMM_C0G2";
+			gpios = <&smb_svc_pex_cpu0_led 24 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0g1 {
+			label = "LED_ID_DIMM_C0G1";
+			gpios = <&smb_svc_pex_cpu0_led 25 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0h2 {
+			label = "LED_ID_DIMM_C0H2";
+			gpios = <&smb_svc_pex_cpu0_led 26 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0h1 {
+			label = "LED_ID_DIMM_C0H1";
+			gpios = <&smb_svc_pex_cpu0_led 27 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0a2 {
+			label = "LED_ID_DIMM_C0A2";
+			gpios = <&smb_svc_pex_cpu0_led 28 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0a1 {
+			label = "LED_ID_DIMM_C0A1";
+			gpios = <&smb_svc_pex_cpu0_led 29 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0b2 {
+			label = "LED_ID_DIMM_C0B2";
+			gpios = <&smb_svc_pex_cpu0_led 30 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0b1 {
+			label = "LED_ID_DIMM_C0B1";
+			gpios = <&smb_svc_pex_cpu0_led 31 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0c2 {
+			label = "LED_ID_DIMM_C0C2";
+			gpios = <&smb_svc_pex_cpu0_led 32 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0c1 {
+			label = "LED_ID_DIMM_C0C1";
+			gpios = <&smb_svc_pex_cpu0_led 33 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0d2 {
+			label = "LED_ID_DIMM_C0D2";
+			gpios = <&smb_svc_pex_cpu0_led 34 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0d1 {
+			label = "LED_ID_DIMM_C0D1";
+			gpios = <&smb_svc_pex_cpu0_led 35 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1e2 {
+			label = "LED_ID_DIMM_C1E2";
+			gpios = <&smb_svc_pex_cpu1_led 20 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1e1 {
+			label = "LED_ID_DIMM_C1E1";
+			gpios = <&smb_svc_pex_cpu1_led 21 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1f2 {
+			label = "LED_ID_DIMM_C1F2";
+			gpios = <&smb_svc_pex_cpu1_led 22 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1f1 {
+			label = "LED_ID_DIMM_C1F1";
+			gpios = <&smb_svc_pex_cpu1_led 23 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1g2 {
+			label = "LED_ID_DIMM_C1G2";
+			gpios = <&smb_svc_pex_cpu1_led 24 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1g1 {
+			label = "LED_ID_DIMM_C1G1";
+			gpios = <&smb_svc_pex_cpu1_led 25 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1h2 {
+			label = "LED_ID_DIMM_C1H2";
+			gpios = <&smb_svc_pex_cpu1_led 26 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1h1 {
+			label = "LED_ID_DIMM_C1H1";
+			gpios = <&smb_svc_pex_cpu1_led 27 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1a2 {
+			label = "LED_ID_DIMM_C1A2";
+			gpios = <&smb_svc_pex_cpu1_led 28 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1a1 {
+			label = "LED_ID_DIMM_C1A1";
+			gpios = <&smb_svc_pex_cpu1_led 29 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1b2 {
+			label = "LED_ID_DIMM_C1B2";
+			gpios = <&smb_svc_pex_cpu1_led 30 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1b1 {
+			label = "LED_ID_DIMM_C1B1";
+			gpios = <&smb_svc_pex_cpu1_led 31 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1c2 {
+			label = "LED_ID_DIMM_C1C2";
+			gpios = <&smb_svc_pex_cpu1_led 32 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1c1 {
+			label = "LED_ID_DIMM_C1C1";
+			gpios = <&smb_svc_pex_cpu1_led 33 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1d2 {
+			label = "LED_ID_DIMM_C1D2";
+			gpios = <&smb_svc_pex_cpu1_led 34 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1d1 {
+			label = "LED_ID_DIMM_C1D1";
+			gpios = <&smb_svc_pex_cpu1_led 35 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2e2 {
+			label = "LED_ID_DIMM_C2E2";
+			gpios = <&smb_svc_pex_cpu2_led 20 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2e1 {
+			label = "LED_ID_DIMM_C2E1";
+			gpios = <&smb_svc_pex_cpu2_led 21 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2f2 {
+			label = "LED_ID_DIMM_C2F2";
+			gpios = <&smb_svc_pex_cpu2_led 22 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2f1 {
+			label = "LED_ID_DIMM_C2F1";
+			gpios = <&smb_svc_pex_cpu2_led 23 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2g2 {
+			label = "LED_ID_DIMM_C2G2";
+			gpios = <&smb_svc_pex_cpu2_led 24 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2g1 {
+			label = "LED_ID_DIMM_C2G1";
+			gpios = <&smb_svc_pex_cpu2_led 25 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2h2 {
+			label = "LED_ID_DIMM_C2H2";
+			gpios = <&smb_svc_pex_cpu2_led 26 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2h1 {
+			label = "LED_ID_DIMM_C2H1";
+			gpios = <&smb_svc_pex_cpu2_led 27 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2a2 {
+			label = "LED_ID_DIMM_C2A2";
+			gpios = <&smb_svc_pex_cpu2_led 28 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2a1 {
+			label = "LED_ID_DIMM_C2A1";
+			gpios = <&smb_svc_pex_cpu2_led 29 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2b2 {
+			label = "LED_ID_DIMM_C2B2";
+			gpios = <&smb_svc_pex_cpu2_led 30 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2b1 {
+			label = "LED_ID_DIMM_C2B1";
+			gpios = <&smb_svc_pex_cpu2_led 31 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2c2 {
+			label = "LED_ID_DIMM_C2C2";
+			gpios = <&smb_svc_pex_cpu2_led 32 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2c1 {
+			label = "LED_ID_DIMM_C2C1";
+			gpios = <&smb_svc_pex_cpu2_led 33 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2d2 {
+			label = "LED_ID_DIMM_C2D2";
+			gpios = <&smb_svc_pex_cpu2_led 34 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2d1 {
+			label = "LED_ID_DIMM_C2D1";
+			gpios = <&smb_svc_pex_cpu2_led 35 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3e2 {
+			label = "LED_ID_DIMM_C3E2";
+			gpios = <&smb_svc_pex_cpu3_led 20 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3e1 {
+			label = "LED_ID_DIMM_C3E1";
+			gpios = <&smb_svc_pex_cpu3_led 21 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3f2 {
+			label = "LED_ID_DIMM_C3F2";
+			gpios = <&smb_svc_pex_cpu3_led 22 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3f1 {
+			label = "LED_ID_DIMM_C3F1";
+			gpios = <&smb_svc_pex_cpu3_led 23 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3g2 {
+			label = "LED_ID_DIMM_C3G2";
+			gpios = <&smb_svc_pex_cpu3_led 24 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3g1 {
+			label = "LED_ID_DIMM_C3G1";
+			gpios = <&smb_svc_pex_cpu3_led 25 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3h2 {
+			label = "LED_ID_DIMM_C3H2";
+			gpios = <&smb_svc_pex_cpu3_led 26 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3h1 {
+			label = "LED_ID_DIMM_C3H1";
+			gpios = <&smb_svc_pex_cpu3_led 27 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3a2 {
+			label = "LED_ID_DIMM_C3A2";
+			gpios = <&smb_svc_pex_cpu3_led 28 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3a1 {
+			label = "LED_ID_DIMM_C3A1";
+			gpios = <&smb_svc_pex_cpu3_led 29 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3b2 {
+			label = "LED_ID_DIMM_C3B2";
+			gpios = <&smb_svc_pex_cpu3_led 30 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3b1 {
+			label = "LED_ID_DIMM_C3B1";
+			gpios = <&smb_svc_pex_cpu3_led 31 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3c2 {
+			label = "LED_ID_DIMM_C3C2";
+			gpios = <&smb_svc_pex_cpu3_led 32 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3c1 {
+			label = "LED_ID_DIMM_C3C1";
+			gpios = <&smb_svc_pex_cpu3_led 33 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3d2 {
+			label = "LED_ID_DIMM_C3D2";
+			gpios = <&smb_svc_pex_cpu3_led 34 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3d1 {
+			label = "LED_ID_DIMM_C3D1";
+			gpios = <&smb_svc_pex_cpu3_led 35 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd01 {
+			label = "LED_ID_RSSD01";
+			gpios = <&smb_svc_pex_rssd01_16 0 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd02 {
+			label = "LED_ID_RSSD02";
+			gpios = <&smb_svc_pex_rssd01_16 1 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd03 {
+			label = "LED_ID_RSSD03";
+			gpios = <&smb_svc_pex_rssd01_16 2 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd04 {
+			label = "LED_ID_RSSD04";
+			gpios = <&smb_svc_pex_rssd01_16 3 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd05 {
+			label = "LED_ID_RSSD05";
+			gpios = <&smb_svc_pex_rssd01_16 4 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd06 {
+			label = "LED_ID_RSSD06";
+			gpios = <&smb_svc_pex_rssd01_16 5 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd07 {
+			label = "LED_ID_RSSD07";
+			gpios = <&smb_svc_pex_rssd01_16 6 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd08 {
+			label = "LED_ID_RSSD08";
+			gpios = <&smb_svc_pex_rssd01_16 7 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd09 {
+			label = "LED_ID_RSSD09";
+			gpios = <&smb_svc_pex_rssd01_16 8 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd10 {
+			label = "LED_ID_RSSD10";
+			gpios = <&smb_svc_pex_rssd01_16 9 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd11 {
+			label = "LED_ID_RSSD11";
+			gpios = <&smb_svc_pex_rssd01_16 10 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd12 {
+			label = "LED_ID_RSSD12";
+			gpios = <&smb_svc_pex_rssd01_16 11 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd13 {
+			label = "LED_ID_RSSD13";
+			gpios = <&smb_svc_pex_rssd01_16 12 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd14 {
+			label = "LED_ID_RSSD14";
+			gpios = <&smb_svc_pex_rssd01_16 13 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd15 {
+			label = "LED_ID_RSSD15";
+			gpios = <&smb_svc_pex_rssd01_16 14 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd16 {
+			label = "LED_ID_RSSD16";
+			gpios = <&smb_svc_pex_rssd01_16 15 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd17 {
+			label = "LED_ID_RSSD17";
+			gpios = <&smb_svc_pex_rssd17_32 0 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd18 {
+			label = "LED_ID_RSSD18";
+			gpios = <&smb_svc_pex_rssd17_32 1 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd19 {
+			label = "LED_ID_RSSD19";
+			gpios = <&smb_svc_pex_rssd17_32 2 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd20 {
+			label = "LED_ID_RSSD20";
+			gpios = <&smb_svc_pex_rssd17_32 3 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd21 {
+			label = "LED_ID_RSSD21";
+			gpios = <&smb_svc_pex_rssd17_32 4 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd22 {
+			label = "LED_ID_RSSD22";
+			gpios = <&smb_svc_pex_rssd17_32 5 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd23 {
+			label = "LED_ID_RSSD23";
+			gpios = <&smb_svc_pex_rssd17_32 6 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd24 {
+			label = "LED_ID_RSSD24";
+			gpios = <&smb_svc_pex_rssd17_32 7 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd25 {
+			label = "LED_ID_RSSD25";
+			gpios = <&smb_svc_pex_rssd17_32 8 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd26 {
+			label = "LED_ID_RSSD26";
+			gpios = <&smb_svc_pex_rssd17_32 9 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd27 {
+			label = "LED_ID_RSSD27";
+			gpios = <&smb_svc_pex_rssd17_32 10 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd28 {
+			label = "LED_ID_RSSD28";
+			gpios = <&smb_svc_pex_rssd17_32 11 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd29 {
+			label = "LED_ID_RSSD29";
+			gpios = <&smb_svc_pex_rssd17_32 12 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd30 {
+			label = "LED_ID_RSSD30";
+			gpios = <&smb_svc_pex_rssd17_32 13 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd31 {
+			label = "LED_ID_RSSD31";
+			gpios = <&smb_svc_pex_rssd17_32 14 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd32 {
+			label = "LED_ID_RSSD32";
+			gpios = <&smb_svc_pex_rssd17_32 15 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm01 {
+			label = "LED_ID_FAN_ASM01";
+			gpios = <&smb_svc_pex_rssd01_16 32 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm02 {
+			label = "LED_ID_FAN_ASM02";
+			gpios = <&smb_svc_pex_rssd01_16 33 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm03 {
+			label = "LED_ID_FAN_ASM03";
+			gpios = <&smb_svc_pex_rssd01_16 34 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm04 {
+			label = "LED_ID_FAN_ASM04";
+			gpios = <&smb_svc_pex_rssd01_16 35 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm05 {
+			label = "LED_ID_FAN_ASM05";
+			gpios = <&smb_svc_pex_rssd01_16 36 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm06 {
+			label = "LED_ID_FAN_ASM06";
+			gpios = <&smb_svc_pex_rssd01_16 37 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm07 {
+			label = "LED_ID_FAN_ASM07";
+			gpios = <&smb_svc_pex_rssd17_32 32 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm08 {
+			label = "LED_ID_FAN_ASM08";
+			gpios = <&smb_svc_pex_rssd17_32 33 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm09 {
+			label = "LED_ID_FAN_ASM09";
+			gpios = <&smb_svc_pex_rssd17_32 34 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm10 {
+			label = "LED_ID_FAN_ASM10";
+			gpios = <&smb_svc_pex_rssd17_32 35 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm11 {
+			label = "LED_ID_FAN_ASM11";
+			gpios = <&smb_svc_pex_rssd17_32 36 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm12 {
+			label = "LED_ID_FAN_ASM12";
+			gpios = <&smb_svc_pex_rssd17_32 37 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&p12v_vd 0>, <&p5v_aux_vd 0>, <&p5v_bmc_aux_vd 0>, <&p3v3_aux_vd 0>,
+			<&p3v3_bmc_aux_vd 0>, <&p1v8_bmc_aux_vd 0>, <&adc1 4>, <&adc0 2>, <&adc1 0>,
+			<&p2V5_aux_vd 0>, <&p3v3_rtc_vd 0>;
+	};
+
+	p12v_vd: voltage-divider1 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 3>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1127/127 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <15>;
+		full-ohms = <133>;
+	};
+
+	p5v_aux_vd: voltage-divider2 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 5>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1365/365 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <50>;
+		full-ohms = <187>;
+	};
+
+	p5v_bmc_aux_vd: voltage-divider3 {
+		compatible = "voltage-divider";
+		io-channels = <&adc0 3>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1365/365 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <50>;
+		full-ohms = <187>;
+	};
+
+	p3v3_aux_vd: voltage-divider4 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 2>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1698/698 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <14>;
+		full-ohms = <34>;
+	};
+
+	p3v3_bmc_aux_vd: voltage-divider5 {
+		compatible = "voltage-divider";
+		io-channels = <&adc0 7>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1698/698 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <14>;
+		full-ohms = <34>;
+	};
+
+	p1v8_bmc_aux_vd: voltage-divider6 {
+		compatible = "voltage-divider";
+		io-channels = <&adc0 6>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 4000/3000 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <3>;
+		full-ohms = <4>;
+	};
+
+	p2V5_aux_vd: voltage-divider7 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 1>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 2100/1100 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <11>;
+		full-ohms = <21>;
+	};
+
+	p3v3_rtc_vd: voltage-divider8 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 7>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 231000/100000 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <100>;
+		full-ohms = <231>;
+	};
+
+	thermistor0: thermistor-0 {
+		compatible = "epcos,b57891s0103";
+		pullup-uv = <3300000>;
+		pullup-ohm = <10000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc0 0>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	thermistor1: thermistor-1 {
+		compatible = "epcos,b57891s0103";
+		pullup-uv = <3300000>;
+		pullup-ohm = <10000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc0 1>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	thermistor2: thermistor-2 {
+		compatible = "epcos,b57891s0103";
+		pullup-uv = <3300000>;
+		pullup-ohm = <10000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc0 4>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	thermistor3: thermistor-3 {
+		compatible = "epcos,b57891s0103";
+		pullup-uv = <3300000>;
+		pullup-ohm = <10000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc0 5>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	p12v: fixedregulator-p12v {
+		compatible = "regulator-fixed";
+		regulator-name = "p12v";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	p3v3_bmc_aux: fixedregulator-p3v3-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p3v3_bmc_aux";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	p1v8_bmc_aux: fixedregulator-p1v8-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p1v8_bmc_aux";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	p1v2_bmc_aux: fixedregulator-p1v2-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p1v2_bmc_aux";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	p12v-a-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p12v_a>;
+	};
+
+	p12v-b-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p12v_b>;
+	};
+
+	p12v-c-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p12v_c>;
+	};
+
+	p12v-d-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p12v_d>;
+	};
+
+	pvccinfaon-cpu0-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccinfaon_cpu0>;
+	};
+
+	pvccfa-ehv-cpu0-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccfa_ehv_cpu0>;
+	};
+
+	pvnn-main-cpu0-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvnn_main_cpu0>;
+	};
+
+	pvccin-cpu0-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccin_cpu0>;
+	};
+
+	pvccfa-ehv-fivra-cpu0-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccfa_ehv_fivra_cpu0>;
+	};
+
+	pvccd-hv-cpu0-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccd_hv_cpu0>;
+	};
+
+	pvpp-hbm-cpu0-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvpp_hbm_cpu0>;
+	};
+
+	pvccinfaon-cpu1-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccinfaon_cpu1>;
+	};
+
+	pvccfa-ehv-cpu1-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccfa_ehv_cpu1>;
+	};
+
+	pvnn-main-cpu1-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvnn_main_cpu1>;
+	};
+
+	pvccin-cpu1-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccin_cpu1>;
+	};
+
+	pvccfa-ehv-fivra-cpu1-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccfa_ehv_fivra_cpu1>;
+	};
+
+	pvccd-hv-cpu1-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccd_hv_cpu1>;
+	};
+
+	pvpp-hbm-cpu1-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvpp_hbm_cpu1>;
+	};
+
+	pvccinfaon-cpu2-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccinfaon_cpu2>;
+	};
+
+	pvccfa-ehv-cpu2-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccfa_ehv_cpu2>;
+	};
+
+	pvnn-main-cpu2-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvnn_main_cpu2>;
+	};
+
+	pvccin-cpu2-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccin_cpu2>;
+	};
+
+	pvccfa-ehv-fivra-cpu2-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccfa_ehv_fivra_cpu2>;
+	};
+
+	pvccd-hv-cpu2-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccd_hv_cpu2>;
+	};
+
+	pvpp-hbm-cpu2-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvpp_hbm_cpu2>;
+	};
+
+	pvccinfaon-cpu3-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccinfaon_cpu3>;
+	};
+
+	pvccfa-ehv-cpu3-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccfa_ehv_cpu3>;
+	};
+
+	pvnn-main-cpu3-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvnn_main_cpu3>;
+	};
+
+	pvccin-cpu3-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccin_cpu3>;
+	};
+
+	pvccfa-ehv-fivra-cpu3-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccfa_ehv_fivra_cpu3>;
+	};
+
+	pvccd-hv-cpu3-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccd_hv_cpu3>;
+	};
+
+	pvpp-hbm-cpu3-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvpp_hbm_cpu3>;
+	};
+
+	p1v05-pch-aux-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p1v05_pch_aux>;
+	};
+
+	p1v8-pch-aux-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p1v8_pch_aux>;
+	};
+
+	p3v3-pch-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p3v3_pch>;
+	};
+
+	p5v-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p5v>;
+	};
+
+	smb-m2-ssb-ssd2 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_smb_m2_ssb_ssd2>;
+	};
+
+	smb-m2-ssb-ssd1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_smb_m2_ssb_ssd1>;
+	};
+
+	ssb-rssd01-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd01>;
+	};
+
+	ssb-rssd01-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd01>;
+	};
+
+	ssb-rssd02-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd02>;
+	};
+
+	ssb-rssd02-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd02>;
+	};
+
+	ssb-rssd03-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd03>;
+	};
+
+	ssb-rssd03-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd03>;
+	};
+
+	ssb-rssd04-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd04>;
+	};
+
+	ssb-rssd04-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd04>;
+	};
+
+	ssb-rssd05-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd05>;
+	};
+
+	ssb-rssd05-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd05>;
+	};
+
+	ssb-rssd06-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd06>;
+	};
+
+	ssb-rssd06-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd06>;
+	};
+
+	ssb-rssd07-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd07>;
+	};
+
+	ssb-rssd07-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd07>;
+	};
+
+	ssb-rssd08-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd08>;
+	};
+
+	ssb-rssd08-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd08>;
+	};
+
+	ssb-rssd09-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd09>;
+	};
+
+	ssb-rssd09-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd09>;
+	};
+
+	ssb-rssd10-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd10>;
+	};
+
+	ssb-rssd10-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd10>;
+	};
+
+	ssb-rssd11-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd11>;
+	};
+
+	ssb-rssd11-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd11>;
+	};
+
+	ssb-rssd12-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd12>;
+	};
+
+	ssb-rssd12-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd12>;
+	};
+
+	ssb-rssd13-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd13>;
+	};
+
+	ssb-rssd13-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd13>;
+	};
+
+	ssb-rssd14-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd14>;
+	};
+
+	ssb-rssd14-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd14>;
+	};
+
+	ssb-rssd15-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd15>;
+	};
+
+	ssb-rssd15-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd15>;
+	};
+
+	ssb-rssd16-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd16>;
+	};
+
+	ssb-rssd16-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd16>;
+	};
+
+	ssb-rssd17-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd17>;
+	};
+
+	ssb-rssd17-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd17>;
+	};
+
+	ssb-rssd18-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd18>;
+	};
+
+	ssb-rssd18-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd18>;
+	};
+
+	ssb-rssd19-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd19>;
+	};
+
+	ssb-rssd19-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd19>;
+	};
+
+	ssb-rssd20-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd20>;
+	};
+
+	ssb-rssd20-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd20>;
+	};
+
+	ssb-rssd21-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd21>;
+	};
+
+	ssb-rssd21-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd21>;
+	};
+
+	ssb-rssd22-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd22>;
+	};
+
+	ssb-rssd22-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd22>;
+	};
+
+	ssb-rssd23-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd23>;
+	};
+
+	ssb-rssd23-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd23>;
+	};
+
+	ssb-rssd24-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd24>;
+	};
+
+	ssb-rssd24-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd24>;
+	};
+
+	ssb-rssd25-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd25>;
+	};
+
+	ssb-rssd25-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd25>;
+	};
+
+	ssb-rssd26-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd26>;
+	};
+
+	ssb-rssd26-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd26>;
+	};
+
+	ssb-rssd27-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd27>;
+	};
+
+	ssb-rssd27-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd27>;
+	};
+
+	ssb-rssd28-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd28>;
+	};
+
+	ssb-rssd28-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd28>;
+	};
+
+	ssb-rssd29-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd29>;
+	};
+
+	ssb-rssd29-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd29>;
+	};
+
+	ssb-rssd30-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd30>;
+	};
+
+	ssb-rssd30-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd30>;
+	};
+
+	ssb-rssd31-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd31>;
+	};
+
+	ssb-rssd31-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd31>;
+	};
+
+	ssb-rssd32-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd32>;
+	};
+
+	ssb-rssd32-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd32>;
+	};
+
+	p3v3-nic-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p3v3_nic>;
+	};
+
+	p1v8-nic-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p1v8_nic>;
+	};
+
+	p1v2-nic-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p1v2_nic>;
+	};
+
+	pvcore-nic1-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvcore_nic1>;
+	};
+
+	pvcore-nic2-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvcore_nic2>;
+	};
+};
+
+&peci0 {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>, <0x81>;
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart5 {
+	status = "disabled";
+};
+
+&gpio1 {
+	status = "disabled";
+};
+
+&video {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_vgahs_default &pinctrl_vgavs_default>;
+};
+
+&mdio2 {
+	status = "okay";
+
+	ethphy2: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		reset-gpios = <&gpio0 ASPEED_GPIO(V, 7) GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <300>;
+	};
+};
+
+&mdio3 {
+	status = "okay";
+
+	ethphy3: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		reset-gpios = <&gpio0 ASPEED_GPIO(G, 2) GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <300>;
+	};
+};
+
+&mac2 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy2>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii3_default>;
+};
+
+&mac3 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy3>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii4_default>;
+};
+
+&adc0 {
+	status = "okay";
+	vref-supply = <&p1v8_bmc_aux>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		     &pinctrl_adc1_default
+		     &pinctrl_adc2_default
+		     &pinctrl_adc3_default
+		     &pinctrl_adc4_default
+		     &pinctrl_adc5_default
+		     &pinctrl_adc6_default
+		     &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	status = "okay";
+	vref-supply = <&p1v8_bmc_aux>;
+	aspeed,battery-sensing;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default
+		     &pinctrl_adc9_default
+		     &pinctrl_adc10_default
+		     &pinctrl_adc11_default
+		     &pinctrl_adc12_default
+		     &pinctrl_adc13_default
+		     &pinctrl_adc15_default>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&gpio0 {
+	status = "okay";
+	gpio-line-names =
+	/* A0 - A7 */
+	"", "", "", "", "", "", "", "",
+	/* B0 - B7 */
+	"", "", "FM_ADR_TRIGGER_R_N", "RST_PLTRST_BUF_N", "BMC_TPM_RESET_N", "BMC_TPM_IRQ_N",
+	"PCH_TPM_RESET_N", "PCH_TPM_IRQ_N",
+	/* C0 - C7 */
+	"", "", "", "", "", "", "", "",
+	/* D0 - D7 */
+	"", "", "", "", "", "", "", "",
+	/* E0 - E7 */
+	"", "", "", "", "", "", "", "",
+	/* F0 - F7 */
+	"", "", "", "BMC_MUX_CPU1_RST_INT_N", "BMC_MUX_CPU2_RST_INT_N", "", "", "",
+	/* G0 - G7 */
+	"FM_SSD_CLK_DRVR1_EN", "FM_CK440Q_DEV_EN", "BMC_MAC1_RESET_N", "FM_DB2000_DEV_EN",
+	"FM_CPU_RMCA_LVT3_N", "FM_CPU_CATERR_LVT3_N", "FM_DBP_PRESENT_N", "",
+	/* H0 - H7 */
+	"SMB_SVC_PEX_RSSD17_32_INT", "LED_BMC_RDY", "RST_DBP_N", "", "", "", "", "",
+	/* I0 - I7 */
+	"JTAG_MUX_MODE_SEL", "JTAG_MUX_TRANS_ENBL", "JTAG_MUX_LSP_SEL5", "JTAG_MUX_MSTR_SEL",
+	"JTAG_MUX_LSP_SEL3", "", "JTAG_MUX_ENBL_N", "JTAG_MUX_RST_N",
+	/* J0 - J7 */
+	"", "", "", "", "", "", "", "",
+	/* K0 - K7 */
+	"", "", "", "", "", "", "", "",
+	/* L0 - L7 */
+	"", "", "", "", "RST_RTCRST_N", "RST_SRTCRST_N", "", "",
+	/* M0 - M7 */
+	"BMC_UART1_CTS_N", "BMC_UART1_DCD_N", "BMC_UART1_DSR_N", "BMC_UART1_RI_N",
+	"BMC_UART1_DTR_N", "BMC_UART1_RTS_N", "", "",
+	/* N0 - N7 */
+	"IRQ_BMC_PCH_NMI", "", "FM_PCH_BMC_THERMTRIP_N", "FM_BIOS_POST_CMPLT_N", "RST_PLTRST_N",
+	"FM_FLASH_SEC_OVRD", "FM_SMI_ACTIVE_N", "PWRGD_DBP",
+	/* O0 - O7 */
+	"CATERR_CPU2_EN", "H_LVT1_THERMTRIP_N", "CATERR_CPU3_EN", "SMB_SVC_PEX_CPU0_LED_INT",
+	"H_LVT1_MEMTRIP_N", "", "CATERR_CPU1_EN", "FM_PCH_ADR_COMPLETE_N",
+	/* P0 - P7 */
+	"PWRGD_SYS_PWROK", "PWRGD_PCH_PWROK", "BMC_MUX_CPU3_RST_INT_N", "BMC_MUX_SVC_RSSD_INT",
+	"FM_SLPS4_N", "IRQ_SML0_ALERT_N", "FM_SLPS3_N", "LED_BMC_HB",
+	/* Q0 - Q7 */
+	"", "PEX_BMC_RST", "PEX_VR_CTRL_RST", "PEX_NIC_RST", "PEX_CPU0_LED_RST", "PEX_CPU1_LED_RST",
+	"PEX_CPU2_LED_RST", "PEX_CPU3_LED_RST",
+	/* R0 - R7 */
+	"BMC_MUX_FANSSB_RSSD17_32_RST_INT_N", "BMC_MUX_FANPWM_RSSD01_16_RST_INT_N",
+	"BMC_MUX_SVC_VR_RST_INT_N", "BMC_MUX_NIC_RST_INT_N", "BMC_MUX_SVC_EXP_RST_INT_N",
+	"FM_CPU_ERR2_LVT3_N", "BMC_MUX_CPU0_RST_INT_N", "BMC_MUX_M2_RST_INT_N",
+	/* S0 - S7 */
+	"SMB_SVC_PEX_RSSD01_16_INT", "RST_PCH_RSMRST_R_N", "", "", "BMC_ROT_FPGA_RESET_N",
+	"FM_SSD_CLK_DRVR0_EN", "", "",
+	/* T0 - T7 */
+	"", "", "", "", "", "", "", "",
+	/* U0 - U7 */
+	"", "", "", "", "", "", "", "",
+	/* V0 - V7 */
+	"BMC_PEX_IRQ_INT", "RTC_BATT_TEST", "SMB_PEX_VR_CTRL_INT", "SMB_SVC_PEX_CPU3_LED_INT",
+	"PWRGD_CPUPWRGD", "SMB_SVC_PEX_CPU2_LED_INT", "SMB_SVC_PEX_CPU1_LED_INT",
+	"BMC_MAC0_RESET_N",
+	/* W0 - W7 */
+	"", "", "", "", "", "", "", "",
+	/* X0 - X7 */
+	"", "", "", "", "", "", "", "",
+	/* Y0 - Y7 */
+	"FM_THROTTLE_N", "FM_PASSWORD_CLEAR_N", "H_LVT3_CATERR_DLY_N", "FM_CPU_OL_INT_R_N", "", "",
+	"", "",
+	/* Z0 - Z7 */
+	"FM_CPU_ERR0_LVT3_N", "FM_CPU_ERR1_LVT3_N", "BMC_MUX_VR_PCH_CPU_RST_INT_N",
+	"JTAG_MUX_LSP_SEL1", "", "JTAG_MUX_LSP_SEL4", "JTAG_MUX_LSP_SEL2", "";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio0_unbiased_default>;
+};
+
+&pinctrl {
+	pinctrl_gpio0_unbiased_default: gpio_default {
+		pins = "AB15", "AD14", "R23", "A18", "AD24", "AD15", "AE14", "AC15", "U25", "AA24",
+		       "V24", "W26", "AA23", "V26", "U24", "V25", "AE15", "C15", "F15";
+		bias-disable;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	bmc_mux_nic: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reset-gpios = <&gpio0 ASPEED_GPIO(R, 3) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_pex_nic: pinctrl@20 {
+				compatible = "cypress,cy8c9540";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-parent = <&smb_pex_vr_ctrl>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				vdd-supply = <&p3v3_aux>;
+				reset-gpios = <&gpio0 ASPEED_GPIO(Q, 3) GPIO_ACTIVE_HIGH>;
+
+				gpio-reserved-ranges = <19 1>, <22 6>, <30 6>, <38 2>;
+
+				gpio-line-names =
+				/* GPORT0 */
+				"IRQ_NIC2_OVT_WRNG", "FM_NIC2_ALLSTANDBY_N", "IRQ_NIC2_OVT_SHTDN",
+				"SMB_VR_PVCORE_NIC2_ALERT_N", "FM_NIC2_PERST1_N",
+				"SMB_NIC2_ALERT_N", "FM_NIC2_PERST3_N", "FM_NIC2_PERST2_N",
+				/* GPORT1 */
+				"FM_NIC1_RST_N", "FM_NIC1_PERST0_N", "FM_NIC1_PERST2_N",
+				"FM_NIC1_PERST3_N", "SMB_NIC1_ALERT_N", "FM_NIC1_PERST1_N",
+				"SMB_VR_PVCORE_NIC1_ALERT_N", "IRQ_NIC1_OVT_SHTDN",
+				/* GPORT2 */
+				"SMB_VR_P3V3_NIC_ALERT_N", "FM_NIC2_FLASH_PRSNT",
+				"FM_NIC1_FLASH_PRSNT", "",
+				/* GPORT3 */
+				"FM_NIC2_PERST0_N", "FM_NIC2_RST_N", "", "", "", "", "", "",
+				/* GPORT4 */
+				"FM_NIC1_ALLSTANDBY_N", "IRQ_NIC1_OVT_WRNG", "", "", "", "", "", "",
+				/* GPORT5 */
+				"SMB_VR_P1V8_NIC_ALERT_N", "SMB_VR_P1V2_NIC_ALERT_N", "", "";
+
+				pinctrl-0 = <&U62160_pins>;
+				pinctrl-names = "default";
+				U62160_pins: cfg-pins {
+					pins = "gp03", "gp16", "gp20", "gp50", "gp51";
+					function = "gpio";
+					input-enable;
+					bias-pull-up;
+				};
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pvcore_nic2: ir38263-pvcore-nic2@40 {
+				compatible = "infineon,ir38263";
+				reg = <0x40>;
+
+				regulator-name = "pvcore_nic2";
+				regulator-enable-ramp-delay = <2000>;
+				vin-supply = <&p12v>;
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pvcore_nic1: ir38263-pvcore-nic1@40 {
+				compatible = "infineon,ir38263";
+				reg = <0x40>;
+
+				regulator-name = "pvcore_nic1";
+				regulator-enable-ramp-delay = <2000>;
+				vin-supply = <&p12v>;
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			p3v3_nic: ir38263-p3v3-nic@40 {
+				compatible = "infineon,ir38263";
+				reg = <0x40>;
+
+				regulator-name = "p3v3_nic";
+				regulator-enable-ramp-delay = <2000>;
+				vin-supply = <&p12v>;
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			p1v2_nic: ir38263-p1v2-nic@40 {
+				compatible = "infineon,ir38263";
+				reg = <0x40>;
+
+				regulator-name = "p1v2_nic";
+				regulator-enable-ramp-delay = <2000>;
+				vin-supply = <&p12v>;
+			};
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			p1v8_nic: ir38263-p1v8-nic@40 {
+				compatible = "infineon,ir38263";
+				reg = <0x40>;
+
+				regulator-name = "p1v8_nic";
+				regulator-enable-ramp-delay = <2000>;
+				vin-supply = <&p12v>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	i2cmux1: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio0 ASPEED_GPIO(R, 7) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_m2_ssb_ssd1: regulator@3a {
+				compatible = "maxim,max5978";
+				reg = <0x3a>;
+				vss1-supply = <&p3v3_aux>;
+
+				interrupt-parent = <&smb_pex_vr_ctrl>;
+				interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						label = "m2_ssb_ssd1:green:power";
+						default-state = "off";
+					};
+				};
+
+				regulators {
+					sw0_smb_m2_ssb_ssd1: sw0 {
+						shunt-resistor-micro-ohms = <12000>;
+						regulator-over-current-protection;
+						regulator-oc-protection-microamp = <2800000>;
+						regulator-name = "p3v3_m2_ssd1";
+						regulator-enable-ramp-delay = <10000>;
+					};
+				};
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_m2_ssb_ssd2: regulator@3a {
+				compatible = "maxim,max5978";
+				reg = <0x3a>;
+
+				interrupt-parent = <&smb_pex_vr_ctrl>;
+				interrupts = <39 IRQ_TYPE_LEVEL_LOW>;
+				vss1-supply = <&p3v3_aux>;
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						label = "m2_ssb_ssd2:green:power";
+						default-state = "off";
+					};
+				};
+
+				regulators {
+					sw0_smb_m2_ssb_ssd2: sw0 {
+						shunt-resistor-micro-ohms = <12000>;
+						regulator-over-current-protection;
+						regulator-oc-protection-microamp = <2800000>;
+						regulator-name = "p3v3_m2_ssd2";
+						regulator-enable-ramp-delay = <10000>;
+					};
+				};
+			};
+		};
+
+		i2c@6 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@7 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	multi-master;
+	bus-frequency = <1000000>;
+
+	bmc-slave@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+
+		i2c-protocol;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	i2cmux2: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio0 ASPEED_GPIO(Z, 2) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			p1v05_pch_aux: ir38263-p1v05-pch-aux@40 {
+				compatible = "infineon,ir38263";
+				reg = <0x40>;
+
+				regulator-name = "p1v05_pch_aux";
+				regulator-enable-ramp-delay = <2000>;
+				vin-supply = <&p12v>;
+			};
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			p1v8_pch_aux: ir38060-p1v8-pch-aux@40 {
+				compatible = "infineon,ir38060";
+				reg = <0x40>;
+
+				regulator-name = "p1v8_pch_aux";
+				regulator-enable-ramp-delay = <2000>;
+				vin-supply = <&p12v>;
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c14 {
+	status = "okay";
+
+	i2cmux13: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio0 ASPEED_GPIO(R, 6) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_pex_cpu0_event: pinctrl@20 {
+				compatible = "cypress,cy8c9540";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-parent = <&smb_pex_vr_ctrl>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				vdd-supply = <&p3v3_aux>;
+				reset-gpios = <&smb_svc_pex_cpu0_led 16 GPIO_ACTIVE_HIGH>;
+
+				gpio-reserved-ranges = <14 2>, <21 1>, <25 3>, <33 1>;
+
+				gpio-line-names =
+				/* GPORT0 */
+				"PWRGD_CHD_CPU0", "PWRGD_CHC_CPU0",
+				"PWRGD_CHB_CPU0", "PWRGD_CHA_CPU0",
+				"PWRGD_CHE_CPU0", "PWRGD_CHF_CPU0",
+				"PWRGD_CHG_CPU0", "PWRGD_CHH_CPU0",
+				/* GPORT1 */
+				"SMB_VR_PVPP_HBM_CPU0_ALERT_N", "SMB_VR_PVCCINFAON_CPU0_ALERT_N",
+				"SMB_VR_PVNN_MAIN_CPU0_ALERT_N", "SMB_VR_PVCCD_HV_CPU0_ALERT_N",
+				"SMB_VR_PVCCIN_CPU0_ALERT_N", "SEL_SMB_DIMM_CPU0",
+				"", "",
+				/* GPORT2 */
+				"PWRGD_LVC3_CPU0_AB_DRAM_G", "PWRGD_LVC3_CPU0_CD_DRAM_G",
+				"PWRGD_LVC3_CPU0_EF_DRAM_G", "PWRGD_LVC3_CPU0_GH_DRAM_G",
+				/* GPORT3 */
+				"FM_CPU0_DISABLE_COD_N", "",
+				"RST_LVC3_CPU0_RESET_N", "PWRGD_LVC3_CPU0_PWRGOOD",
+				"PWRGD_PLT_AUX_CPU0_LVT3", "",
+				"", "",
+				/* GPORT4 */
+				"H_LVT3_CPU0_PROCHOT_N", "H_LVT3_CPU0_MEMHOT_IN_N",
+				"H_LVT3_CPU0_MEMHOT_OUT_N", "H_LVT3_CPU0_MEMTRIP_OUT_N",
+				"H_LVT3_CPU0_THERMTRIP_OUT_N", "",
+				"H_LVT3_CPU0_NMI", "FM_S3M_CPU0_CD_INIT_ERROR",
+				/* GPORT5 */
+				"FM_CPU0_PKG_ID0", "FM_CPU0_PKG_ID1",
+				"FM_CPU0_PROC_ID0", "FM_CPU0_PROC_ID1";
+
+				pinctrl-0 = <&U62080_pins>;
+				pinctrl-names = "default";
+				U62080_pins: cfg-pins {
+					pins = "gp10", "gp11", "gp12", "gp13", "gp14";
+					function = "gpio";
+					input-enable;
+					bias-pull-up;
+				};
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pvccinfaon-pvccfa-cpu0@58 {
+				compatible = "mps,mp2971";
+				reg = <0x58>;
+				interrupt-parent = <&smb_pex_cpu0_event>;
+				interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvccinfaon_cpu0: vout0 {
+						regulator-name = "pvccinfaon_cpu0";
+						regulator-enable-ramp-delay = <200>;
+					};
+					pvccfa_ehv_cpu0: vout1 {
+						regulator-name = "pvccfa_ehv_cpu0";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+			tda38640-pvnn-main-cpu0@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu0_event>;
+				interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvnn_main_cpu0: vout {
+						regulator-name = "pvnn_main_cpu0";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mp2973-pvccin-pvccfa-cpu0@58 {
+				compatible = "mps,mp2973";
+				reg = <0x58>;
+				interrupt-parent = <&smb_pex_cpu0_event>;
+				interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvccin_cpu0: vout0 {
+						regulator-name = "pvccin_cpu0";
+						regulator-enable-ramp-delay = <200>;
+					};
+					pvccfa_ehv_fivra_cpu0: vout1 {
+						regulator-name = "pvccfa_ehv_fivra_cpu0";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tda38640-pvccd-hv-cpu0@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu0_event>;
+				interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+				infineon,en-pin-fixed-level;
+
+				regulators {
+					pvccd_hv_cpu0: vout {
+						regulator-name = "pvccd_hv_cpu0";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tda38640-pvpp-hbm-cpu0@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu0_event>;
+				interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvpp_hbm_cpu0: vout {
+						regulator-name = "pvpp_hbm_cpu0";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	i2cmux4: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio0 ASPEED_GPIO(F, 3) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_pex_cpu1_event: pinctrl@20 {
+				compatible = "cypress,cy8c9540";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-parent = <&smb_pex_vr_ctrl>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				vdd-supply = <&p3v3_aux>;
+				reset-gpios = <&smb_svc_pex_cpu1_led 16 GPIO_ACTIVE_HIGH>;
+
+				gpio-reserved-ranges = <14 2>, <21 1>, <25 3>, <33 1>;
+
+				gpio-line-names =
+				/* GPORT0 */
+				"PWRGD_CHD_CPU1", "PWRGD_CHC_CPU1",
+				"PWRGD_CHB_CPU1", "PWRGD_CHA_CPU1",
+				"PWRGD_CHE_CPU1", "PWRGD_CHF_CPU1",
+				"PWRGD_CHG_CPU1", "PWRGD_CHH_CPU1",
+				/* GPORT1 */
+				"SMB_VR_PVPP_HBM_CPU1_ALERT_N", "SMB_VR_PVCCINFAON_CPU1_ALERT_N",
+				"SMB_VR_PVNN_MAIN_CPU1_ALERT_N", "SMB_VR_PVCCD_HV_CPU1_ALERT_N",
+				"SMB_VR_PVCCIN_CPU1_ALERT_N", "SEL_SMB_DIMM_CPU1",
+				"", "",
+				/* GPORT2 */
+				"PWRGD_LVC3_CPU1_AB_DRAM_G", "PWRGD_LVC3_CPU1_CD_DRAM_G",
+				"PWRGD_LVC3_CPU1_EF_DRAM_G", "PWRGD_LVC3_CPU1_GH_DRAM_G",
+				/* GPORT3 */
+				"FM_CPU1_DISABLE_COD_N", "",
+				"RST_LVC3_CPU1_RESET_N", "PWRGD_LVC3_CPU1_PWRGOOD",
+				"PWRGD_PLT_AUX_CPU1_LVT3", "",
+				"", "",
+				/* GPORT4 */
+				"H_LVT3_CPU1_PROCHOT_N", "H_LVT3_CPU1_MEMHOT_IN_N",
+				"H_LVT3_CPU1_MEMHOT_OUT_N", "H_LVT3_CPU1_MEMTRIP_OUT_N",
+				"H_LVT3_CPU1_THERMTRIP_OUT_N", "",
+				"H_LVT3_CPU1_NMI", "FM_S3M_CPU1_CD_INIT_ERROR",
+				/* GPORT5 */
+				"FM_CPU1_PKG_ID0", "FM_CPU1_PKG_ID1",
+				"FM_CPU1_PROC_ID0", "FM_CPU1_PROC_ID1";
+
+				pinctrl-0 = <&U62090_pins>;
+				pinctrl-names = "default";
+				U62090_pins: cfg-pins {
+					pins = "gp10", "gp11", "gp12", "gp13", "gp14";
+					function = "gpio";
+					input-enable;
+					bias-pull-up;
+				};
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pvccinfaon-pvccfa-cpu1@58 {
+				compatible = "mps,mp2971";
+				reg = <0x58>;
+				interrupt-parent = <&smb_pex_cpu1_event>;
+				interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvccinfaon_cpu1: vout0 {
+						regulator-name = "pvccinfaon_cpu1";
+						regulator-enable-ramp-delay = <200>;
+					};
+					pvccfa_ehv_cpu1: vout1 {
+						regulator-name = "pvccfa_ehv_cpu1";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+			tda38640-pvnn-main-cpu1@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu1_event>;
+				interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvnn_main_cpu1: vout {
+						regulator-name = "pvnn_main_cpu1";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mp2973-pvccin-pvccfa-cpu1@58 {
+				compatible = "mps,mp2973";
+				reg = <0x58>;
+				interrupt-parent = <&smb_pex_cpu1_event>;
+				interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvccin_cpu1: vout0 {
+						regulator-name = "pvccin_cpu1";
+						regulator-enable-ramp-delay = <200>;
+					};
+					pvccfa_ehv_fivra_cpu1: vout1 {
+						regulator-name = "pvccfa_ehv_fivra_cpu1";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tda38640-pvccd-hv-cpu1@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu1_event>;
+				interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+				infineon,en-pin-fixed-level;
+
+				regulators {
+					pvccd_hv_cpu1: vout {
+						regulator-name = "pvccd_hv_cpu1";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tda38640-pvpp-hbm-cpu1@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu1_event>;
+				interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvpp_hbm_cpu1: vout {
+						regulator-name = "pvpp_hbm_cpu1";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	i2cmux3: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_pex_cpu2_event: pinctrl@20 {
+				compatible = "cypress,cy8c9540";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-parent = <&smb_pex_vr_ctrl>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				vdd-supply = <&p3v3_aux>;
+				reset-gpios = <&smb_svc_pex_cpu2_led 16 GPIO_ACTIVE_HIGH>;
+
+				gpio-reserved-ranges = <14 2>, <21 1>, <25 3>, <33 1>;
+
+				gpio-line-names =
+				/* GPORT0 */
+				"PWRGD_CHD_CPU2", "PWRGD_CHC_CPU2",
+				"PWRGD_CHB_CPU2", "PWRGD_CHA_CPU2",
+				"PWRGD_CHE_CPU2", "PWRGD_CHF_CPU2",
+				"PWRGD_CHG_CPU2", "PWRGD_CHH_CPU2",
+				/* GPORT1 */
+				"SMB_VR_PVPP_HBM_CPU2_ALERT_N", "SMB_VR_PVCCINFAON_CPU2_ALERT_N",
+				"SMB_VR_PVNN_MAIN_CPU2_ALERT_N", "SMB_VR_PVCCD_HV_CPU2_ALERT_N",
+				"SMB_VR_PVCCIN_CPU2_ALERT_N", "SEL_SMB_DIMM_CPU2",
+				"", "",
+				/* GPORT2 */
+				"PWRGD_LVC3_CPU2_AB_DRAM_G", "PWRGD_LVC3_CPU2_CD_DRAM_G",
+				"PWRGD_LVC3_CPU2_EF_DRAM_G", "PWRGD_LVC3_CPU2_GH_DRAM_G",
+				/* GPORT3 */
+				"FM_CPU2_DISABLE_COD_N", "",
+				"RST_LVC3_CPU2_RESET_N", "PWRGD_LVC3_CPU2_PWRGOOD",
+				"PWRGD_PLT_AUX_CPU2_LVT3", "",
+				"", "",
+				/* GPORT4 */
+				"H_LVT3_CPU2_PROCHOT_N", "H_LVT3_CPU2_MEMHOT_IN_N",
+				"H_LVT3_CPU2_MEMHOT_OUT_N", "H_LVT3_CPU2_MEMTRIP_OUT_N",
+				"H_LVT3_CPU2_THERMTRIP_OUT_N", "",
+				"H_LVT3_CPU2_NMI", "FM_S3M_CPU2_CD_INIT_ERROR",
+				/* GPORT5 */
+				"FM_CPU2_PKG_ID0", "FM_CPU2_PKG_ID1",
+				"FM_CPU2_PROC_ID0", "FM_CPU2_PROC_ID1";
+
+				pinctrl-0 = <&U62100_pins>;
+				pinctrl-names = "default";
+				U62100_pins: cfg-pins {
+					pins = "gp10", "gp11", "gp12", "gp13", "gp14";
+					function = "gpio";
+					input-enable;
+					bias-pull-up;
+				};
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pvccinfaon-pvccfa-cpu2@58 {
+				compatible = "mps,mp2971";
+				reg = <0x58>;
+				interrupt-parent = <&smb_pex_cpu2_event>;
+				interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvccinfaon_cpu2: vout0 {
+						regulator-name = "pvccinfaon_cpu2";
+						regulator-enable-ramp-delay = <200>;
+					};
+					pvccfa_ehv_cpu2: vout1 {
+						regulator-name = "pvccfa_ehv_cpu2";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+			tda38640-pvnn-main-cpu2@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu2_event>;
+				interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvnn_main_cpu2: vout {
+						regulator-name = "pvnn_main_cpu2";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mp2973-pvccin-pvccfa-cpu2@58 {
+				compatible = "mps,mp2973";
+				reg = <0x58>;
+				interrupt-parent = <&smb_pex_cpu2_event>;
+				interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvccin_cpu2: vout0 {
+						regulator-name = "pvccin_cpu2";
+						regulator-enable-ramp-delay = <200>;
+					};
+					pvccfa_ehv_fivra_cpu2: vout1 {
+						regulator-name = "pvccfa_ehv_fivra_cpu2";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tda38640-pvccd-hv-cpu2@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu2_event>;
+				interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+				infineon,en-pin-fixed-level;
+
+				regulators {
+					pvccd_hv_cpu2: vout {
+						regulator-name = "pvccd_hv_cpu2";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tda38640-pvpp-hbm-cpu2@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu2_event>;
+				interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvpp_hbm_cpu2: vout {
+						regulator-name = "pvpp_hbm_cpu2";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	i2cmux22: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio0 ASPEED_GPIO(P, 2) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_pex_cpu3_event: pinctrl@20 {
+				compatible = "cypress,cy8c9540";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-parent = <&smb_pex_vr_ctrl>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				vdd-supply = <&p3v3_aux>;
+				reset-gpios = <&smb_svc_pex_cpu3_led 16 GPIO_ACTIVE_HIGH>;
+
+				gpio-reserved-ranges = <14 2>, <21 1>, <25 3>, <33 1>;
+
+				gpio-line-names =
+				/* GPORT0 */
+				"PWRGD_CHD_CPU3", "PWRGD_CHC_CPU3",
+				"PWRGD_CHB_CPU3", "PWRGD_CHA_CPU3",
+				"PWRGD_CHE_CPU3", "PWRGD_CHF_CPU3",
+				"PWRGD_CHG_CPU3", "PWRGD_CHH_CPU3",
+				/* GPORT1 */
+				"SMB_VR_PVPP_HBM_CPU3_ALERT_N", "SMB_VR_PVCCINFAON_CPU3_ALERT_N",
+				"SMB_VR_PVNN_MAIN_CPU3_ALERT_N", "SMB_VR_PVCCD_HV_CPU3_ALERT_N",
+				"SMB_VR_PVCCIN_CPU3_ALERT_N", "SEL_SMB_DIMM_CPU3",
+				"", "",
+				/* GPORT2 */
+				"PWRGD_LVC3_CPU3_AB_DRAM_G", "PWRGD_LVC3_CPU3_CD_DRAM_G",
+				"PWRGD_LVC3_CPU3_EF_DRAM_G", "PWRGD_LVC3_CPU3_GH_DRAM_G",
+				/* GPORT3 */
+				"FM_CPU3_DISABLE_COD_N", "",
+				"RST_LVC3_CPU3_RESET_N", "PWRGD_LVC3_CPU3_PWRGOOD",
+				"PWRGD_PLT_AUX_CPU3_LVT3", "",
+				"", "",
+				/* GPORT4 */
+				"H_LVT3_CPU3_PROCHOT_N", "H_LVT3_CPU3_MEMHOT_IN_N",
+				"H_LVT3_CPU3_MEMHOT_OUT_N", "H_LVT3_CPU3_MEMTRIP_OUT_N",
+				"H_LVT3_CPU3_THERMTRIP_OUT_N", "",
+				"H_LVT3_CPU3_NMI", "FM_S3M_CPU3_CD_INIT_ERROR",
+				/* GPORT5 */
+				"FM_CPU3_PKG_ID0", "FM_CPU3_PKG_ID1",
+				"FM_CPU3_PROC_ID0", "FM_CPU3_PROC_ID1";
+
+				pinctrl-0 = <&U62110_pins>;
+				pinctrl-names = "default";
+				U62110_pins: cfg-pins {
+					pins = "gp10", "gp11", "gp12", "gp13", "gp14";
+					function = "gpio";
+					input-enable;
+					bias-pull-up;
+				};
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pvccinfaon-pvccfa-cpu3@58 {
+				compatible = "mps,mp2971";
+				reg = <0x58>;
+				interrupt-parent = <&smb_pex_cpu3_event>;
+				interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvccinfaon_cpu3: vout0 {
+						regulator-name = "pvccinfaon_cpu3";
+						regulator-enable-ramp-delay = <200>;
+					};
+					pvccfa_ehv_cpu3: vout1 {
+						regulator-name = "pvccfa_ehv_cpu3";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+			tda38640-pvnn-main-cpu3@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu3_event>;
+				interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvnn_main_cpu3: vout {
+						regulator-name = "pvnn_main_cpu3";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mp2973-pvccin-pvccfa-cpu3@58 {
+				compatible = "mps,mp2973";
+				reg = <0x58>;
+				interrupt-parent = <&smb_pex_cpu3_event>;
+				interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvccin_cpu3: vout0 {
+						regulator-name = "pvccin_cpu3";
+						regulator-enable-ramp-delay = <200>;
+					};
+					pvccfa_ehv_fivra_cpu3: vout1 {
+						regulator-name = "pvccfa_ehv_fivra_cpu3";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tda38640-pvccd-hv-cpu3@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu3_event>;
+				interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+				infineon,en-pin-fixed-level;
+
+				regulators {
+					pvccd_hv_cpu3: vout {
+						regulator-name = "pvccd_hv_cpu3";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tda38640-pvpp-hbm-cpu3@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu3_event>;
+				interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvpp_hbm_cpu3: vout {
+						regulator-name = "pvpp_hbm_cpu3";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c15 {
+	status = "okay";
+
+	i2cmux14: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio0 ASPEED_GPIO(R, 1) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux15: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 11 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux16: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 2 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux17: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 0 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux18: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 3 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux19: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 9 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_pex_rssd17_32: pinctrl@20 {
+				compatible = "cypress,cy8c9560";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-parent = <&bmc_pex_irq>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				vdd-supply = <&p3v3_aux>;
+				reset-gpios = <&bmc_pex_irq 19 GPIO_ACTIVE_HIGH>;
+
+				gpio-reserved-ranges = <48 12>;
+
+				gpio-line-names =
+				/* GPORT0 */
+				"RSSD17_SMBRST_N", "RSSD18_SMBRST_N",
+				"RSSD19_SMBRST_N", "RSSD20_SMBRST_N",
+				"RSSD21_SMBRST_N", "RSSD22_SMBRST_N",
+				"RSSD23_SMBRST_N", "RSSD24_SMBRST_N",
+				/* GPORT1 */
+				"RSSD25_SMBRST_N", "RSSD26_SMBRST_N",
+				"RSSD27_SMBRST_N", "RSSD28_SMBRST_N",
+				"RSSD29_SMBRST_N", "RSSD30_SMBRST_N",
+				"RSSD31_SMBRST_N", "RSSD32_SMBRST_N",
+				/* GPORT2 */
+				"RSSD17_PWRDIS", "RSSD18_PWRDIS",
+				"RSSD19_PWRDIS", "RSSD20_PWRDIS",
+				/* GPORT3 */
+				"RSSD21_PWRDIS", "RSSD22_PWRDIS",
+				"RSSD23_PWRDIS", "RSSD24_PWRDIS",
+				"RSSD25_PWRDIS", "RSSD26_PWRDIS",
+				"RSSD27_PWRDIS", "RSSD28_PWRDIS",
+				/* GPORT4 */
+				"RSSD29_PWRDIS", "RSSD30_PWRDIS",
+				"RSSD31_PWRDIS", "RSSD32_PWRDIS",
+				"RSSD17_RESET_N", "RSSD18_RESET_N",
+				"RSSD19_RESET_N", "RSSD20_RESET_N",
+				/* GPORT5 */
+				"RSSD21_RESET_N", "RSSD22_RESET_N",
+				"RSSD23_RESET_N", "RSSD24_RESET_N",
+				"RSSD25_RESET_N", "RSSD26_RESET_N",
+				"RSSD27_RESET_N", "RSSD28_RESET_N",
+				/* GPORT6 */
+				"RSSD29_RESET_N", "RSSD30_RESET_N",
+				"RSSD31_RESET_N", "RSSD32_RESET_N",
+				"", "",
+				"", "",
+				/* GPORT7 */
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux20: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 4 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+
+				i2c@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@3 {
+					reg = <3>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@4 {
+					reg = <4>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@5 {
+					reg = <5>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@6 {
+					reg = <6>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@7 {
+					reg = <7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux21: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 5 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+
+				i2c@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@3 {
+					reg = <3>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@4 {
+					reg = <4>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@5 {
+					reg = <5>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@6 {
+					reg = <6>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@7 {
+					reg = <7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	i2cmux5: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio0 ASPEED_GPIO(R, 0) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux6: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 16 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux7: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 7 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux8: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 1 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux9: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 10 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux10: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_pex_rssd_01_16: pinctrl@20 {
+				compatible = "cypress,cy8c9560";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-parent = <&bmc_pex_irq>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				vdd-supply = <&p3v3_aux>;
+				reset-gpios = <&bmc_pex_irq 18 GPIO_ACTIVE_HIGH>;
+
+				gpio-reserved-ranges = <48 12>;
+
+				gpio-line-names =
+				/* GPORT0 */
+				"RSSD01_SMBRST_N", "RSSD02_SMBRST_N",
+				"RSSD03_SMBRST_N", "RSSD04_SMBRST_N",
+				"RSSD05_SMBRST_N", "RSSD06_SMBRST_N",
+				"RSSD07_SMBRST_N", "RSSD08_SMBRST_N",
+				/* GPORT1 */
+				"RSSD09_SMBRST_N", "RSSD10_SMBRST_N",
+				"RSSD11_SMBRST_N", "RSSD12_SMBRST_N",
+				"RSSD13_SMBRST_N", "RSSD14_SMBRST_N",
+				"RSSD15_SMBRST_N", "RSSD16_SMBRST_N",
+				/* GPORT2 */
+				"RSSD01_PWRDIS", "RSSD02_PWRDIS",
+				"RSSD03_PWRDIS", "RSSD04_PWRDIS",
+				/* GPORT3 */
+				"RSSD05_PWRDIS", "RSSD06_PWRDIS",
+				"RSSD07_PWRDIS", "RSSD08_PWRDIS",
+				"RSSD09_PWRDIS", "RSSD10_PWRDIS",
+				"RSSD11_PWRDIS", "RSSD12_PWRDIS",
+				/* GPORT4 */
+				"RSSD13_PWRDIS", "RSSD14_PWRDIS",
+				"RSSD15_PWRDIS", "RSSD16_PWRDIS",
+				"RSSD01_RESET_N", "RSSD02_RESET_N",
+				"RSSD03_RESET_N", "RSSD04_RESET_N",
+				/* GPORT5 */
+				"RSSD05_RESET_N", "RSSD06_RESET_N",
+				"RSSD07_RESET_N", "RSSD08_RESET_N",
+				"RSSD09_RESET_N", "RSSD10_RESET_N",
+				"RSSD11_RESET_N", "RSSD12_RESET_N",
+				/* GPORT6 */
+				"RSSD13_RESET_N", "RSSD14_RESET_N",
+				"RSSD15_RESET_N", "RSSD16_RESET_N",
+				"", "",
+				"", "",
+				/* GPORT7 */
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux11: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 12 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+
+				i2c@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@3 {
+					reg = <3>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@4 {
+					reg = <4>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@5 {
+					reg = <5>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@6 {
+					reg = <6>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@7 {
+					reg = <7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux12: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 14 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+
+				i2c@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@3 {
+					reg = <3>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@4 {
+					reg = <4>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@5 {
+					reg = <5>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@6 {
+					reg = <6>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@7 {
+					reg = <7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	i2cmux23: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio0 ASPEED_GPIO(R, 4) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_bmc_aux>;
+	};
+};
+
+&i2cmux23 {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		smb_pex_vr_ctrl: pinctrl@20 {
+			compatible = "cypress,cy8c9540";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <ASPEED_GPIO(V, 2) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_bmc_aux>;
+			reset-gpios = <&gpio0 ASPEED_GPIO(Q, 2) GPIO_ACTIVE_HIGH>;
+			gpio-line-names =
+			/* GPORT0 */
+			"BCM0_INPUT_DISABLE_N", "SMB_VR_P3V3_AUX_ALERT_N",
+			"SMB_PEX_CPU1_EVENT_INT", "SMB_PEX_CPU2_EVENT_INT",
+			"DPIC0_VOLTAGE_DETECTB_N", "DPIC0_VOLTAGE_DETECTA_N",
+			"DPIC1_VOLTAGE_DETECTA_N", "DPIC1_VOLTAGE_DETECTB_N",
+			/* GPORT1 */
+			"SMB_PEX_NIC_INT", "SMB_VR_P1V05_PCH_AUX_ALERT_N",
+			"SMB_PEX_CPU0_EVENT_INT", "SMB_PEX_CPU3_EVENT_INT",
+			"LED_ID_TPM", "PLUG_DETECT_TPM",
+			"PLUG_DETECT_M2_SSD_CARRIER1", "RST_M2_SSD1_PERST_N",
+			/* GPORT2 */
+			"LED_ID_BAT", "LED_ID_MGMT_PORT2",
+			"LED_ID_MGMT_PORT1", "SMB_VR_P5V_AUX_ALERT_N",
+			/* GPORT3 */
+			"SMB_VR_AUX_SSB_ALERT_N", "BCM1_INPUT_DISABLE_N",
+			"LED_ID_NIC1_PORT1", "LED_ID_NIC1_PORT2",
+			"LED_ID_NIC2_PORT1", "LED_ID_NIC2_PORT2",
+			"RST_M2_SSD2_PERST_N", "PLUG_DETECT_M2_SSD2",
+			/* GPORT4 */
+			"PLUG_DETECT_BAT", "PLUG_DETECT_M2_SSD1",
+			"M2_SSD1_SSB_ALERT_N", "BCM2_INPUT_DISABLE_N",
+			"SMB_VR_P1V8_PCH_AUX_ALERT_N", "BCM3_INPUT_DISABLE_N",
+			"LED_PWR_DWR_BACK", "LED_ID_DWR_BACK_P",
+			/* GPORT5 */
+			"LED_ID_M2_SSD2", "LED_ID_M2_SSD1",
+			"PLUG_DETECT_M2_SSD_CARRIER2", "M2_SSD2_SSB_ALERT_N";
+
+			pinctrl-0 = <&U62120_input &U62120_input_pullup>;
+			pinctrl-names = "default";
+			U62120_input: input-pins {
+				pins = "gp10";
+				function = "gpio";
+				input-enable;
+				bias-disable;
+			};
+			U62120_input_pullup: input-pullup-pins {
+				pins = "gp01", "gp02", "gp03", "gp11", "gp12", "gp13",
+				"gp23", "gp30", "gp40", "gp42", "gp44", "gp53";
+				function = "gpio";
+				input-enable;
+				bias-pull-up;
+			};
+		};
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		bmc_pex_irq: pinctrl@20 {
+			compatible = "cypress,cy8c9520";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <ASPEED_GPIO(V, 0) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_aux>;
+			reset-gpios = <&gpio0 ASPEED_GPIO(Q, 1) GPIO_ACTIVE_HIGH>;
+			gpio-line-names =
+			/* GPORT0 */
+			"SMB_MUX_PWM_FANGRP2_RST_INT_N", "SMB_MUX_SSB_FANGRP2_RST_INT_N",
+			"SMB_MUX_PWM_FANGRP1_RST_INT_N", "SMB_MUX_SSB_RSSD01_08_RST_INT_N",
+			"SMB_MUX_RSSD01_08_RST_INT_N", "SMB_MUX_RSSD09_16_RST_INT_N",
+			"SMB_PEX_RSSD01_16_INT", "SMB_MUX_SSB_FANGRP1_RST_INT_N",
+			/* GPORT1 */
+			"SMB_SVC_PEX_FAN_ALERT_INT", "SMB_MUX_SSB_RSSD09_16_RST_INT_N",
+			"SMB_MUX_SSB_RSSD17_24_RST_INT_N", "SMB_MUX_PWM_FANGRP0_RST_INT_N",
+			"SMB_MUX_RSSD17_24_RST_INT_N", "SMB_PEX_RSSD17_32_INT",
+			"SMB_MUX_RSSD25_32_RST_INT_N", "SMB_MUX_SSB_RSSD25_32_RST_INT_N",
+			/* GPORT2 */
+			"SMB_MUX_SSB_FANGRP0_RST_INT_N", "PEX_FAN_ALERT_RST",
+			"PEX_RSSD01_16_RST", "PEX_RSSD17_32_RST";
+			pinctrl-0 = <&U60000_pins>;
+			pinctrl-names = "default";
+			U60000_pins: cfg-pins {
+				pins = "gp06", "gp10", "gp15";
+				function = "gpio";
+				input-enable;
+				bias-disable;
+			};
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2cmux24: mux@70 {
+			compatible = "maxim,max7357";
+			reg = <0x70>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vdd-supply = <&p3v3_bmc_aux>;
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		eeprom@51 {
+			compatible = "atmel,24c32";
+			reg = <0x51>;
+			pagesize = <32>;
+			vcc-supply = <&p3v3_bmc_aux>;
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2cmux25: mux@70 {
+			compatible = "maxim,max7357";
+			reg = <0x70>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2cmux25 {
+	reset-gpios = <&gpio0 ASPEED_GPIO(R, 2) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+	vdd-supply = <&p3v3_bmc_aux>;
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		p5v_aux: ir38263-p5v-aux@40 {
+			compatible = "infineon,ir38263";
+			reg = <0x40>;
+
+			regulator-name = "p5v_aux";
+			regulator-enable-ramp-delay = <2000>;
+			vin-supply = <&p12v>;
+			vbus-supply = <&p3v3_bmc_aux>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		p3v3_aux: ir38263-p3v3-aux@40 {
+			compatible = "infineon,ir38263";
+			reg = <0x40>;
+
+			vin-supply = <&p12v>;
+			regulator-name = "p3v3_aux";
+			/*
+			 * 2msec for regulator + 18msec for board capacitance
+			 * Note: Every IC has a PTC which slowly charges the bypass
+			 * cap.
+			 */
+			regulator-enable-ramp-delay = <200000>;
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		aux_ssb: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_pex_vr_ctrl>;
+			interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+			vss1-supply = <&p5v_aux>;
+			vss2-supply = <&p3v3_aux>;
+			regulators {
+				p5v: sw0 {
+					regulator-name = "p5v";
+					shunt-resistor-micro-ohms = <12000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <100000>;
+				};
+				p3v3_pch: sw1 {
+					regulator-name = "p3v3_pch";
+					shunt-resistor-micro-ohms = <12000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <100000>;
+				};
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pli1209bc_p12v_a: regulator@5f {
+			compatible = "vicor,pli1209bc";
+			reg = <0x5f>;
+			regulators {
+				p12v_a: vout2 {
+					regulator-name = "bcm0";
+					regulator-boot-on;
+				};
+			};
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pli1209bc_p12v_b: regulator@5f {
+			compatible = "vicor,pli1209bc";
+			reg = <0x5f>;
+			regulators {
+				p12v_b: vout2 {
+					regulator-name = "bcm1";
+					regulator-boot-on;
+				};
+			};
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pli1209bc_p12v_c: regulator@5f {
+			compatible = "vicor,pli1209bc";
+			reg = <0x5f>;
+			regulators {
+				p12v_c: vout2 {
+					regulator-name = "bcm2";
+					regulator-boot-on;
+				};
+			};
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pli1209bc_p12v_d: regulator@5f {
+			compatible = "vicor,pli1209bc";
+			reg = <0x5f>;
+			regulators {
+				p12v_d: vout2 {
+					regulator-name = "bcm3";
+					regulator-boot-on;
+				};
+			};
+		};
+	};
+};
+
+&i2cmux24 {
+
+	reset-gpios = <&gpio0 ASPEED_GPIO(P, 3) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
+	i2c@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+		smb_svc_pex_rssd01_16: pinctrl@20 {
+			compatible = "cypress,cy8c9560";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <ASPEED_GPIO(S, 0) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_bmc_aux>;
+			reset-gpios = <&smb_svc_pex_cpu0_led 17 GPIO_ACTIVE_HIGH>;
+			gpio-line-names =
+			/* GPORT0 */
+			"LED_ID_RSSD01", "LED_ID_RSSD02",
+			"LED_ID_RSSD03", "LED_ID_RSSD04",
+			"LED_ID_RSSD05", "LED_ID_RSSD06",
+			"LED_ID_RSSD07", "LED_ID_RSSD08",
+			/* GPORT1 */
+			"LED_ID_RSSD09", "LED_ID_RSSD10",
+			"LED_ID_RSSD11", "LED_ID_RSSD12",
+			"LED_ID_RSSD13", "LED_ID_RSSD14",
+			"LED_ID_RSSD15", "LED_ID_RSSD16",
+			/* GPORT2 */
+			"RSSD01_PRESENT_N", "RSSD02_PRESENT_N",
+			"RSSD03_PRESENT_N", "RSSD04_PRESENT_N",
+			/* GPORT3 */
+			"RSSD05_PRESENT_N", "RSSD06_PRESENT_N",
+			"RSSD07_PRESENT_N", "RSSD08_PRESENT_N",
+			"RSSD09_PRESENT_N", "RSSD10_PRESENT_N",
+			"RSSD11_PRESENT_N", "RSSD12_PRESENT_N",
+			/* GPORT4 */
+			"RSSD13_PRESENT_N", "RSSD14_PRESENT_N",
+			"RSSD15_PRESENT_N", "RSSD16_PRESENT_N",
+			"LED_ID_FAN_ASM01", "LED_ID_FAN_ASM02",
+			"LED_ID_FAN_ASM03", "LED_ID_FAN_ASM04",
+			/* GPORT5 */
+			"LED_ID_FAN_ASM05", "LED_ID_FAN_ASM06",
+			"PLUG_DETECT_FAN_ASM01", "PLUG_DETECT_FAN_ASM02",
+			"PLUG_DETECT_FAN_ASM03", "PLUG_DETECT_FAN_ASM04",
+			"PLUG_DETECT_FAN_ASM05", "PLUG_DETECT_FAN_ASM06",
+			/* GPORT6 */
+			"SSB_RSSD01_ALERT_N", "SSB_RSSD02_ALERT_N",
+			"SSB_RSSD03_ALERT_N", "SSB_RSSD04_ALERT_N",
+			"SSB_RSSD05_ALERT_N", "SSB_RSSD06_ALERT_N",
+			"SSB_RSSD07_ALERT_N", "SSB_RSSD08_ALERT_N",
+			/* GPORT7 */
+			"SSB_RSSD09_ALERT_N", "SSB_RSSD10_ALERT_N",
+			"SSB_RSSD11_ALERT_N", "SSB_RSSD12_ALERT_N",
+			"SSB_RSSD13_ALERT_N", "SSB_RSSD14_ALERT_N",
+			"SSB_RSSD15_ALERT_N", "SSB_RSSD16_ALERT_N";
+			pinctrl-0 = <&U65200_pins>;
+			pinctrl-names = "default";
+			U65200_pins: cfg-pins {
+				pins = "gp60", "gp61", "gp62", "gp63", "gp64",
+				       "gp65", "gp66", "gp67", "gp70", "gp71",
+				       "gp72", "gp73", "gp74", "gp75", "gp76",
+				       "gp77";
+				function = "gpio";
+				input-enable;
+				bias-pull-up;
+			};
+		};
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		smb_svc_pex_rssd17_32: pinctrl@20 {
+			compatible = "cypress,cy8c9560";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <ASPEED_GPIO(H, 0) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_bmc_aux>;
+			reset-gpios = <&smb_svc_pex_cpu1_led 17 GPIO_ACTIVE_HIGH>;
+			gpio-line-names =
+			/* GPORT0 */
+			"LED_ID_RSSD17", "LED_ID_RSSD18",
+			"LED_ID_RSSD19", "LED_ID_RSSD20",
+			"LED_ID_RSSD21", "LED_ID_RSSD22",
+			"LED_ID_RSSD23", "LED_ID_RSSD24",
+			/* GPORT1 */
+			"LED_ID_RSSD25", "LED_ID_RSSD26",
+			"LED_ID_RSSD27", "LED_ID_RSSD28",
+			"LED_ID_RSSD29", "LED_ID_RSSD30",
+			"LED_ID_RSSD31", "LED_ID_RSSD32",
+			/* GPORT2 */
+			"RSSD17_PRESENT_N", "RSSD18_PRESENT_N",
+			"RSSD19_PRESENT_N", "RSSD20_PRESENT_N",
+			/* GPORT3 */
+			"RSSD21_PRESENT_N", "RSSD22_PRESENT_N",
+			"RSSD23_PRESENT_N", "RSSD24_PRESENT_N",
+			"RSSD25_PRESENT_N", "RSSD26_PRESENT_N",
+			"RSSD27_PRESENT_N", "RSSD28_PRESENT_N",
+			/* GPORT4 */
+			"RSSD29_PRESENT_N", "RSSD30_PRESENT_N",
+			"RSSD31_PRESENT_N", "RSSD32_PRESENT_N",
+			"LED_ID_FAN_ASM07", "LED_ID_FAN_ASM08",
+			"LED_ID_FAN_ASM09", "LED_ID_FAN_ASM10",
+			/* GPORT5 */
+			"LED_ID_FAN_ASM11", "LED_ID_FAN_ASM12",
+			"PLUG_DETECT_FAN_ASM07", "PLUG_DETECT_FAN_ASM08",
+			"PLUG_DETECT_FAN_ASM09", "PLUG_DETECT_FAN_ASM10",
+			"PLUG_DETECT_FAN_ASM11", "PLUG_DETECT_FAN_ASM12",
+			/* GPORT6 */
+			"SSB_RSSD17_ALERT_N", "SSB_RSSD18_ALERT_N",
+			"SSB_RSSD19_ALERT_N", "SSB_RSSD20_ALERT_N",
+			"SSB_RSSD21_ALERT_N", "SSB_RSSD22_ALERT_N",
+			"SSB_RSSD23_ALERT_N", "SSB_RSSD24_ALERT_N",
+			/* GPORT7 */
+			"SSB_RSSD25_ALERT_N", "SSB_RSSD26_ALERT_N",
+			"SSB_RSSD27_ALERT_N", "SSB_RSSD28_ALERT_N",
+			"SSB_RSSD29_ALERT_N", "SSB_RSSD30_ALERT_N",
+			"SSB_RSSD31_ALERT_N", "SSB_RSSD32_ALERT_N";
+			pinctrl-0 = <&U65300_pins>;
+			pinctrl-names = "default";
+			U65300_pins: cfg-pins {
+				pins = "gp60", "gp61", "gp62",
+				"gp63", "gp64", "gp65", "gp66",
+				"gp67", "gp70", "gp71", "gp72",
+				"gp73", "gp74", "gp75", "gp76",
+				"gp77";
+				function = "gpio";
+				input-enable;
+				bias-pull-up;
+			};
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		smb_svc_pex_cpu1_led: pinctrl@20 {
+			compatible = "cypress,cy8c9540";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <ASPEED_GPIO(V, 6) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_bmc_aux>;
+			reset-gpios = <&gpio0 ASPEED_GPIO(Q, 5) GPIO_ACTIVE_HIGH>;
+			gpio-reserved-ranges = <18 2>, <36 2>;
+			gpio-line-names =
+			/* GPORT0 */
+			"PLUG_DETECT_DIMM_C1E2", "PLUG_DETECT_DIMM_C1E1",
+			"PLUG_DETECT_DIMM_C1F2", "PLUG_DETECT_DIMM_C1F1",
+			"PLUG_DETECT_DIMM_C1G2", "PLUG_DETECT_DIMM_C1G1",
+			"PLUG_DETECT_DIMM_C1H2", "PLUG_DETECT_DIMM_C1H1",
+			/* GPORT1 */
+			"PLUG_DETECT_DIMM_C1D1", "PLUG_DETECT_DIMM_C1D2",
+			"PLUG_DETECT_DIMM_C1C1", "PLUG_DETECT_DIMM_C1C2",
+			"PLUG_DETECT_DIMM_C1B1", "PLUG_DETECT_DIMM_C1B2",
+			"PLUG_DETECT_DIMM_C1A1", "PLUG_DETECT_DIMM_C1A2",
+			/* GPORT2 */
+			"PEX_CPU1_EVENT_RST", "SVC_PEX_RSSD17_32_RST",
+			"", "",
+			/* GPORT3 */
+			"LED_ID_DIMM_C1E2", "LED_ID_DIMM_C1E1",
+			"LED_ID_DIMM_C1F2", "LED_ID_DIMM_C1F1",
+			"LED_ID_DIMM_C1G2", "LED_ID_DIMM_C1G1",
+			"LED_ID_DIMM_C1H2", "LED_ID_DIMM_C1H1",
+			/* GPORT4 */
+			"LED_ID_DIMM_C1A2", "LED_ID_DIMM_C1A1",
+			"LED_ID_DIMM_C1B2", "LED_ID_DIMM_C1B1",
+			"LED_ID_DIMM_C1C2", "LED_ID_DIMM_C1C1",
+			"LED_ID_DIMM_C1D2", "LED_ID_DIMM_C1D1",
+			/* GPORT5 */
+			"", "",
+			"FM_CPU1_SKTOCC_N", "LED_ID_CPU1";
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		smb_svc_pex_fan_alert: pinctrl@20 {
+			compatible = "cypress,cy8c9560";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&bmc_pex_irq>;
+			interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_aux>;
+			reset-gpios = <&bmc_pex_irq 17 GPIO_ACTIVE_HIGH>;
+			gpio-reserved-ranges = <24 3>, <51 9>;
+			gpio-line-names =
+			/* GPORT0 */
+			"FAN01_SSB_ALERT_N", "FAN02_SSB_ALERT_N",
+			"FAN03_SSB_ALERT_N", "FAN04_SSB_ALERT_N",
+			"FAN05_SSB_ALERT_N", "FAN06_SSB_ALERT_N",
+			"FAN07_SSB_ALERT_N", "FAN08_SSB_ALERT_N",
+			/* GPORT1 */
+			"FAN09_SSB_ALERT_N", "FAN10_SSB_ALERT_N",
+			"FAN11_SSB_ALERT_N", "FAN12_SSB_ALERT_N",
+			"FAN13_SSB_ALERT_N", "FAN14_SSB_ALERT_N",
+			"FAN15_SSB_ALERT_N", "FAN16_SSB_ALERT_N",
+			/* GPORT2 */
+			"FAN17_SSB_ALERT_N", "FAN18_SSB_ALERT_N",
+			"FAN19_SSB_ALERT_N", "FAN20_SSB_ALERT_N",
+			/* GPORT3 */
+			"FAN21_SSB_ALERT_N", "FAN22_SSB_ALERT_N",
+			"FAN23_SSB_ALERT_N", "FAN24_SSB_ALERT_N",
+			"", "",
+			"", "FAN01_PWM_ALERT_N",
+			/* GPORT4 */
+			"FAN02_PWM_ALERT_N", "FAN03_PWM_ALERT_N",
+			"FAN04_PWM_ALERT_N", "FAN05_PWM_ALERT_N",
+			"FAN06_PWM_ALERT_N", "FAN07_PWM_ALERT_N",
+			"FAN08_PWM_ALERT_N", "FAN09_PWM_ALERT_N",
+			/* GPORT5 */
+			"FAN10_PWM_ALERT_N", "FAN11_PWM_ALERT_N",
+			"FAN12_PWM_ALERT_N", "FAN13_PWM_ALERT_N",
+			"FAN14_PWM_ALERT_N", "FAN15_PWM_ALERT_N",
+			"FAN16_PWM_ALERT_N", "FAN17_PWM_ALERT_N",
+			/* GPORT6 */
+			"FAN18_PWM_ALERT_N", "FAN19_PWM_ALERT_N",
+			"FAN20_PWM_ALERT_N", "FAN21_PWM_ALERT_N",
+			"FAN22_PWM_ALERT_N", "FAN23_PWM_ALERT_N",
+			"FAN24_PWM_ALERT_N", "",
+			/* GPORT7 */
+			"", "",
+			"", "",
+			"", "",
+			"", "";
+			pinctrl-0 = <&U65600_pins>;
+			pinctrl-names = "default";
+			U65600_pins: cfg-pins {
+				pins = "gp00", "gp01", "gp02",
+				"gp03", "gp04", "gp05", "gp06",
+				"gp07", "gp10", "gp11", "gp12",
+				"gp13", "gp14", "gp15", "gp16",
+				"gp17", "gp20", "gp21", "gp22",
+				"gp23", "gp30", "gp31", "gp32",
+				"gp33", "gp37", "gp40", "gp41",
+				"gp42", "gp43", "gp44", "gp45",
+				"gp46", "gp47", "gp50", "gp51",
+				"gp52", "gp53", "gp54", "gp55",
+				"gp56", "gp57", "gp60", "gp61",
+				"gp62", "gp63", "gp64", "gp65",
+				"gp66";
+				function = "gpio";
+				input-enable;
+				bias-pull-up;
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		smb_svc_pex_cpu2_led: pinctrl@20 {
+			compatible = "cypress,cy8c9540";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <ASPEED_GPIO(V, 5) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_bmc_aux>;
+			reset-gpios = <&gpio0 ASPEED_GPIO(Q, 6) GPIO_ACTIVE_HIGH>;
+			gpio-reserved-ranges = <17 3>, <36 2>;
+			gpio-line-names =
+			/* GPORT0 */
+			"PLUG_DETECT_DIMM_C2E2", "PLUG_DETECT_DIMM_C2E1",
+			"PLUG_DETECT_DIMM_C2F2", "PLUG_DETECT_DIMM_C2F1",
+			"PLUG_DETECT_DIMM_C2G2", "PLUG_DETECT_DIMM_C2G1",
+			"PLUG_DETECT_DIMM_C2H2", "PLUG_DETECT_DIMM_C2H1",
+			/* GPORT1 */
+			"PLUG_DETECT_DIMM_C2D1", "PLUG_DETECT_DIMM_C2D2",
+			"PLUG_DETECT_DIMM_C2C1", "PLUG_DETECT_DIMM_C2C2",
+			"PLUG_DETECT_DIMM_C2B1", "PLUG_DETECT_DIMM_C2B2",
+			"PLUG_DETECT_DIMM_C2A1", "PLUG_DETECT_DIMM_C2A2",
+			/* GPORT2 */
+			"PEX_CPU2_EVENT_RST", "",
+			"", "",
+			/* GPORT3 */
+			"LED_ID_DIMM_C2E2", "LED_ID_DIMM_C2E1",
+			"LED_ID_DIMM_C2F2", "LED_ID_DIMM_C2F1",
+			"LED_ID_DIMM_C2G2", "LED_ID_DIMM_C2G1",
+			"LED_ID_DIMM_C2H2", "LED_ID_DIMM_C2H1",
+			/* GPORT4 */
+			"LED_ID_DIMM_C2A2", "LED_ID_DIMM_C2A1",
+			"LED_ID_DIMM_C2B2", "LED_ID_DIMM_C2B1",
+			"LED_ID_DIMM_C2C2", "LED_ID_DIMM_C2C1",
+			"LED_ID_DIMM_C2D2", "LED_ID_DIMM_C2D1",
+			/* GPORT5 */
+			"", "",
+			"FM_CPU2_SKTOCC_N", "LED_ID_CPU2";
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		smb_svc_pex_cpu3_led: pinctrl@20 {
+			compatible = "cypress,cy8c9540";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <ASPEED_GPIO(V, 3) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_bmc_aux>;
+			reset-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
+			gpio-reserved-ranges = <17 3>;
+			gpio-line-names =
+			/* GPORT0 */
+			"PLUG_DETECT_DIMM_C3E2", "PLUG_DETECT_DIMM_C3E1",
+			"PLUG_DETECT_DIMM_C3F2", "PLUG_DETECT_DIMM_C3F1",
+			"PLUG_DETECT_DIMM_C3G2", "PLUG_DETECT_DIMM_C3G1",
+			"PLUG_DETECT_DIMM_C3H2", "PLUG_DETECT_DIMM_C3H1",
+			/* GPORT1 */
+			"PLUG_DETECT_DIMM_C3D1", "PLUG_DETECT_DIMM_C3D2",
+			"PLUG_DETECT_DIMM_C3C1", "PLUG_DETECT_DIMM_C3C2",
+			"PLUG_DETECT_DIMM_C3B1", "PLUG_DETECT_DIMM_C3B2",
+			"PLUG_DETECT_DIMM_C3A1", "PLUG_DETECT_DIMM_C3A2",
+			/* GPORT2 */
+			"PEX_CPU3_EVENT_RST", "",
+			"", "",
+			/* GPORT3 */
+			"LED_ID_DIMM_C3E2", "LED_ID_DIMM_C3E1",
+			"LED_ID_DIMM_C3F2", "LED_ID_DIMM_C3F1",
+			"LED_ID_DIMM_C3G2", "LED_ID_DIMM_C3G1",
+			"LED_ID_DIMM_C3H2", "LED_ID_DIMM_C3H1",
+			/* GPORT4 */
+			"LED_ID_DIMM_C3A2", "LED_ID_DIMM_C3A1",
+			"LED_ID_DIMM_C3B2", "LED_ID_DIMM_C3B1",
+			"LED_ID_DIMM_C3C2", "LED_ID_DIMM_C3C1",
+			"LED_ID_DIMM_C3D2", "LED_ID_DIMM_C3D1",
+			/* GPORT5 */
+			"LED_PWR_DWR_FRNT", "LED_ID_DWR_FRNT_P",
+			"FM_CPU3_SKTOCC_N", "LED_ID_CPU3";
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		smb_svc_pex_cpu0_led: pinctrl@20 {
+			compatible = "cypress,cy8c9540";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <ASPEED_GPIO(O, 3) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_bmc_aux>;
+			reset-gpios = <&gpio0 ASPEED_GPIO(Q, 4) GPIO_ACTIVE_HIGH>;
+			gpio-reserved-ranges = <18 2>, <36 2>;
+			gpio-line-names =
+			/* GPORT0 */
+			"PLUG_DETECT_DIMM_C0E2", "PLUG_DETECT_DIMM_C0E1",
+			"PLUG_DETECT_DIMM_C0F2", "PLUG_DETECT_DIMM_C0F1",
+			"PLUG_DETECT_DIMM_C0G2", "PLUG_DETECT_DIMM_C0G1",
+			"PLUG_DETECT_DIMM_C0H2", "PLUG_DETECT_DIMM_C0H1",
+			/* GPORT1 */
+			"PLUG_DETECT_DIMM_C0D1", "PLUG_DETECT_DIMM_C0D2",
+			"PLUG_DETECT_DIMM_C0C1", "PLUG_DETECT_DIMM_C0C2",
+			"PLUG_DETECT_DIMM_C0B1", "PLUG_DETECT_DIMM_C0B2",
+			"PLUG_DETECT_DIMM_C0A1", "PLUG_DETECT_DIMM_C0A2",
+			/* GPORT2 */
+			"PEX_CPU0_EVENT_RST", "SVC_PEX_RSSD01_16_RST",
+			"", "",
+			/* GPORT3 */
+			"LED_ID_DIMM_C0E2", "LED_ID_DIMM_C0E1",
+			"LED_ID_DIMM_C0F2", "LED_ID_DIMM_C0F1",
+			"LED_ID_DIMM_C0G2", "LED_ID_DIMM_C0G1",
+			"LED_ID_DIMM_C0H2", "LED_ID_DIMM_C0H1",
+			/* GPORT4 */
+			"LED_ID_DIMM_C0A2", "LED_ID_DIMM_C0A1",
+			"LED_ID_DIMM_C0B2", "LED_ID_DIMM_C0B1",
+			"LED_ID_DIMM_C0C2", "LED_ID_DIMM_C0C1",
+			"LED_ID_DIMM_C0D2", "LED_ID_DIMM_C0D1",
+			/* GPORT5 */
+			"", "",
+			"FM_CPU0_SKTOCC_N", "LED_ID_CPU0";
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	p1v2_bmc_aux_mon: pmic@60 {
+		compatible = "maxim,max8952";
+		reg = <0x60>;
+		max8952,default-mode = <3>;
+		max8952,dvs-mode-microvolt = <1100000>, <1100000>,
+					     <1100000>, <1100000>;
+		max8952,sync-freq = <0>;
+		max8952,ramp-speed = <0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&i2cmux8 {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan10_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan10_ssb: sw0 {
+					regulator-name = "fan10_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan12_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan12_ssb: sw0 {
+					regulator-name = "fan12_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan14_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan14_ssb: sw0 {
+					regulator-name = "fan14_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan16_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan16_ssb: sw0 {
+					regulator-name = "fan16_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan18_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan18_ssb: sw0 {
+					regulator-name = "fan18_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan20_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan20_ssb: sw0 {
+					regulator-name = "fan20_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan22_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan22_ssb: sw0 {
+					regulator-name = "fan22_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan24_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan24_ssb: sw0 {
+					regulator-name = "fan24_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+};
+
+&i2cmux7 {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan17_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan17_ssb: sw0 {
+					regulator-name = "fan17_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan19_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan19_ssb: sw0 {
+					regulator-name = "fan19_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan21_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan21_ssb: sw0 {
+					regulator-name = "fan21_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan23_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <22 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan23_ssb: sw0 {
+					regulator-name = "fan23_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan02_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan02_ssb: sw0 {
+					regulator-name = "fan02_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan04_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan04_ssb: sw0 {
+					regulator-name = "fan04_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan06_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan06_ssb: sw0 {
+					regulator-name = "fan06_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan08_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan08_ssb: sw0 {
+					regulator-name = "fan08_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+};
+
+&i2cmux6 {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan01_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan01_ssb: sw0 {
+					regulator-name = "fan01_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan03_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan03_ssb: sw0 {
+					regulator-name = "fan03_supply";
+
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan05_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan05_ssb: sw0 {
+					regulator-name = "fan05_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan07_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan07_ssb: sw0 {
+					regulator-name = "fan07_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan09_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan09_ssb: sw0 {
+					regulator-name = "fan09_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan11_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan11_ssb: sw0 {
+					regulator-name = "fan11_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan13_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan13_ssb: sw0 {
+					regulator-name = "fan13_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan15_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan15_ssb: sw0 {
+					regulator-name = "fan15_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+
+	};
+};
+
+&i2cmux9 {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd19: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <46 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd19:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd19: sw0 {
+					regulator-name = "rssd19_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd19: sw1 {
+					regulator-name = "rssd19_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd18: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <45 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd18:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd18: sw0 {
+					regulator-name = "rssd18_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd18: sw1 {
+					regulator-name = "rssd18_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd17: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd17:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd17: sw0 {
+					regulator-name = "rssd17_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd17: sw1 {
+					regulator-name = "rssd17_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd20: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <47 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd20:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd20: sw0 {
+					regulator-name = "rssd20_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd20: sw1 {
+					regulator-name = "rssd20_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd21: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <48 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd21:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd21: sw0 {
+					regulator-name = "rssd21_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd21: sw1 {
+					regulator-name = "rssd21_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd22: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <49 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd22:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd22: sw0 {
+					regulator-name = "rssd22_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd22: sw1 {
+					regulator-name = "rssd22_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd24: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <51 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd24:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd24: sw0 {
+					regulator-name = "rssd24_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd24: sw1 {
+					regulator-name = "rssd24_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd23: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <50 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd23:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd23: sw0 {
+					regulator-name = "rssd23_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd23: sw1 {
+					regulator-name = "rssd23_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+};
+
+&i2cmux10 {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd25: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <52 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd25:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd25: sw0 {
+					regulator-name = "rssd25_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd25: sw1 {
+					regulator-name = "rssd25_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd26: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <53 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd26:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd26: sw0 {
+					regulator-name = "rssd26_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd26: sw1 {
+					regulator-name = "rssd26_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd27: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <54 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd27:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd27: sw0 {
+					regulator-name = "rssd27_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd27: sw1 {
+					regulator-name = "rssd27_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd32: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <59 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd32:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd32: sw0 {
+					regulator-name = "rssd32_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd32: sw1 {
+					regulator-name = "rssd32_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd31: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <58 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd31:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd31: sw0 {
+					regulator-name = "rssd31_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd31: sw1 {
+					regulator-name = "rssd31_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd30: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <57 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd30:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd30: sw0 {
+					regulator-name = "rssd30_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd30: sw1 {
+					regulator-name = "rssd30_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd29: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <56 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd29:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd29: sw0 {
+					regulator-name = "rssd29_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd29: sw1 {
+					regulator-name = "rssd29_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd28: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <55 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd28:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd28: sw0 {
+					regulator-name = "rssd28_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd28: sw1 {
+					regulator-name = "rssd28_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+};
+
+&i2cmux18 {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd03: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <46 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd03:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd03: sw0 {
+					regulator-name = "rssd03_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd03: sw1 {
+					regulator-name = "rssd03_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd02: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <45 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd02:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd02: sw0 {
+					regulator-name = "rssd02_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd02: sw1 {
+					regulator-name = "rssd02_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd01: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd01:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd01: sw0 {
+					regulator-name = "rssd01_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd01: sw1 {
+					regulator-name = "rssd01_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd04: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <47 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd04:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd04: sw0 {
+					regulator-name = "rssd04_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd04: sw1 {
+					regulator-name = "rssd04_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd05: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <48 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd05:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd05: sw0 {
+					regulator-name = "rssd05_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd05: sw1 {
+					regulator-name = "rssd05_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd08: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <51 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd08:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd08: sw0 {
+					regulator-name = "rssd08_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd08: sw1 {
+					regulator-name = "rssd08_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd07: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <50 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd07:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd07: sw0 {
+					regulator-name = "rssd07_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd07: sw1 {
+					regulator-name = "rssd07_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd06: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <49 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd06:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd06: sw0 {
+					regulator-name = "rssd06_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd06: sw1 {
+					regulator-name = "rssd06_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+};
+
+&i2cmux19 {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd14: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <57 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd14:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd14: sw0 {
+					regulator-name = "rssd14_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd14: sw1 {
+					regulator-name = "rssd14_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd13: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <56 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd13:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd13: sw0 {
+					regulator-name = "rssd13_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd13: sw1 {
+					regulator-name = "rssd13_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd12: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <55 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd12:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd12: sw0 {
+					regulator-name = "rssd12_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd12: sw1 {
+					regulator-name = "rssd12_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd11: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <54 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd11:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd11: sw0 {
+					regulator-name = "rssd11_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd11: sw1 {
+					regulator-name = "rssd11_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd10: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <53 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd10:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd10: sw0 {
+					regulator-name = "rssd10_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd10: sw1 {
+					regulator-name = "rssd10_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd09: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <52 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd09:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd09: sw0 {
+					regulator-name = "rssd09_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd09: sw1 {
+					regulator-name = "rssd09_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd15: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <58 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd15:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd15: sw0 {
+					regulator-name = "rssd15_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd15: sw1 {
+					regulator-name = "rssd15_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd16: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <59 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd16:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd16: sw0 {
+					regulator-name = "rssd16_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd16: sw1 {
+					regulator-name = "rssd16_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
new file mode 100644
index 000000000000..c8267c97a44e
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
@@ -0,0 +1,1671 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2023 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "System1";
+	compatible = "ibm,system1-bmc", "aspeed,ast2600";
+
+	aliases {
+		i2c16 = &i2c8mux1chn0;
+		i2c17 = &i2c8mux1chn1;
+		i2c18 = &i2c8mux1chn2;
+		i2c19 = &i2c8mux1chn3;
+		i2c20 = &i2c8mux1chn4;
+		i2c21 = &i2c8mux1chn5;
+		i2c22 = &i2c8mux1chn6;
+		i2c23 = &i2c8mux1chn7;
+		i2c24 = &i2c3mux0chn0;
+		i2c25 = &i2c3mux0chn1;
+		i2c26 = &i2c3mux0chn2;
+		i2c27 = &i2c3mux0chn3;
+		i2c28 = &i2c3mux0chn4;
+		i2c29 = &i2c3mux0chn5;
+		i2c30 = &i2c3mux0chn6;
+		i2c31 = &i2c3mux0chn7;
+		i2c32 = &i2c6mux0chn0;
+		i2c33 = &i2c6mux0chn1;
+		i2c34 = &i2c6mux0chn2;
+		i2c35 = &i2c6mux0chn3;
+		i2c36 = &i2c6mux0chn4;
+		i2c37 = &i2c6mux0chn5;
+		i2c38 = &i2c6mux0chn6;
+		i2c39 = &i2c6mux0chn7;
+		i2c40 = &i2c7mux0chn0;
+		i2c41 = &i2c7mux0chn1;
+		i2c42 = &i2c7mux0chn2;
+		i2c43 = &i2c7mux0chn3;
+		i2c44 = &i2c7mux0chn4;
+		i2c45 = &i2c7mux0chn5;
+		i2c46 = &i2c7mux0chn6;
+		i2c47 = &i2c7mux0chn7;
+		i2c48 = &i2c8mux0chn0;
+		i2c49 = &i2c8mux0chn1;
+		i2c50 = &i2c8mux0chn2;
+		i2c51 = &i2c8mux0chn3;
+		i2c52 = &i2c8mux0chn4;
+		i2c53 = &i2c8mux0chn5;
+		i2c54 = &i2c8mux0chn6;
+		i2c55 = &i2c8mux0chn7;
+		i2c56 = &i2c14mux0chn0;
+		i2c57 = &i2c14mux0chn1;
+		i2c58 = &i2c14mux0chn2;
+		i2c59 = &i2c14mux0chn3;
+		i2c60 = &i2c14mux0chn4;
+		i2c61 = &i2c14mux0chn5;
+		i2c62 = &i2c14mux0chn6;
+		i2c63 = &i2c14mux0chn7;
+		i2c64 = &i2c15mux0chn0;
+		i2c65 = &i2c15mux0chn1;
+		i2c66 = &i2c15mux0chn2;
+		i2c67 = &i2c15mux0chn3;
+		i2c68 = &i2c15mux0chn4;
+		i2c69 = &i2c15mux0chn5;
+		i2c70 = &i2c15mux0chn6;
+		i2c71 = &i2c15mux0chn7;
+	};
+
+	chosen {
+		stdout-path = "uart5:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		eventlog: tcg-event-log@b3d00000 {
+			no-map;
+			reg = <0xb3d00000 0x100000>;
+		};
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>; /* KMSG_DUMP_EMERG */
+		};
+
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			no-map;
+			reg = <0xb4000000 0x04000000>; /* 64M */
+		};
+
+		/* VGA region is dictated by hardware strapping */
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;  /* 16M */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-bmc-ready {
+			gpios = <&gpio0 ASPEED_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-bmc-hb {
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-rear-enc-fault0 {
+			gpios = <&gpio0 ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-rear-enc-id0 {
+			gpios = <&gpio0 ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-fan0-fault {
+			gpios = <&pca3 5 GPIO_ACTIVE_LOW>;
+		};
+
+		led-fan1-fault {
+			gpios = <&pca3 6 GPIO_ACTIVE_LOW>;
+		};
+
+		led-fan2-fault {
+			gpios = <&pca3 7 GPIO_ACTIVE_LOW>;
+		};
+
+		led-fan3-fault {
+			gpios = <&pca3 8 GPIO_ACTIVE_LOW>;
+		};
+
+		led-fan4-fault {
+			gpios = <&pca3 9 GPIO_ACTIVE_LOW>;
+		};
+
+		led-fan5-fault {
+			gpios = <&pca3 10 GPIO_ACTIVE_LOW>;
+		};
+
+		led-fan6-fault {
+			gpios = <&pca3 11 GPIO_ACTIVE_LOW>;
+		};
+
+		led-nvmed0-fault {
+			gpios = <&pca4 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-nvmed1-fault {
+			gpios = <&pca4 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-nvmed2-fault {
+			gpios = <&pca4 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-nvmed3-fault {
+			gpios = <&pca4 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-nvme0-presence {
+			label = "nvme0-presence";
+			gpios = <&pca4 0 GPIO_ACTIVE_LOW>;
+			linux,code = <0>;
+		};
+
+		event-nvme1-presence {
+			label = "nvme1-presence";
+			gpios = <&pca4 1 GPIO_ACTIVE_LOW>;
+			linux,code = <1>;
+		};
+
+		event-nvme2-presence {
+			label = "nvme2-presence";
+			gpios = <&pca4 2 GPIO_ACTIVE_LOW>;
+			linux,code = <2>;
+		};
+
+		event-nvme3-presence {
+			label = "nvme3-presence";
+			gpios = <&pca4 3 GPIO_ACTIVE_LOW>;
+			linux,code = <3>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&p12v_vd 0>, <&p5v_aux_vd 0>,
+			<&p5v_bmc_aux_vd 0>, <&p3v3_aux_vd 0>,
+			<&p3v3_bmc_aux_vd 0>, <&p1v8_bmc_aux_vd 0>,
+			<&adc1 4>, <&adc0 2>, <&adc1 0>,
+			<&p2v5_aux_vd 0>, <&adc1 7>;
+	};
+
+	p12v_vd: voltage-divider1 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 3>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1127/127 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <15>;
+		full-ohms = <133>;
+	};
+
+	p5v_aux_vd: voltage-divider2 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 5>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1365/365 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <50>;
+		full-ohms = <187>;
+	};
+
+	p5v_bmc_aux_vd: voltage-divider3 {
+		compatible = "voltage-divider";
+		io-channels = <&adc0 3>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1365/365 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <50>;
+		full-ohms = <187>;
+	};
+
+	p3v3_aux_vd: voltage-divider4 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 2>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1698/698 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <14>;
+		full-ohms = <34>;
+	};
+
+	p3v3_bmc_aux_vd: voltage-divider5 {
+		compatible = "voltage-divider";
+		io-channels = <&adc0 7>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1698/698 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <14>;
+		full-ohms = <34>;
+	};
+
+	p1v8_bmc_aux_vd: voltage-divider6 {
+		compatible = "voltage-divider";
+		io-channels = <&adc0 6>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 4000/3000 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <3>;
+		full-ohms = <4>;
+	};
+
+	p2v5_aux_vd: voltage-divider7 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 1>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 2100/1100 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <11>;
+		full-ohms = <21>;
+	};
+
+	p1v8_bmc_aux: fixedregulator-p1v8-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p1v8_bmc_aux";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+};
+
+&adc0 {
+	status = "okay";
+	vref-supply = <&p1v8_bmc_aux>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		&pinctrl_adc1_default
+		&pinctrl_adc2_default
+		&pinctrl_adc3_default
+		&pinctrl_adc4_default
+		&pinctrl_adc5_default
+		&pinctrl_adc6_default
+		&pinctrl_adc7_default>;
+};
+
+&adc1 {
+	status = "okay";
+	vref-supply = <&p1v8_bmc_aux>;
+	aspeed,battery-sensing;
+
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default
+		&pinctrl_adc9_default
+		&pinctrl_adc10_default
+		&pinctrl_adc11_default
+		&pinctrl_adc12_default
+		&pinctrl_adc13_default
+		&pinctrl_adc14_default
+		&pinctrl_adc15_default>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl_gpiol4_unbiased: gpiol4 {
+		pins = "C15";
+		bias-disable;
+	};
+
+	pinctrl_gpiol5_unbiased: gpiol5 {
+		pins = "F15";
+		bias-disable;
+	};
+
+	pinctrl_gpiol6_unbiased: gpiol6 {
+		pins = "B14";
+		bias-disable;
+	};
+
+	pinctrl_gpiol7_unbiased: gpiol7 {
+		pins = "C14";
+		bias-disable;
+	};
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpiol4_unbiased
+		&pinctrl_gpiol5_unbiased
+		&pinctrl_gpiol6_unbiased
+		&pinctrl_gpiol7_unbiased>;
+
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"","","","","bmc-tpm-reset","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","led-bmc-ready",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"pch-reset","","","","","flash-write-override","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","led-bmc-hb",
+	/*Q0-Q7*/	"","","","","","","pch-ready","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","led-rear-enc-fault0","led-rear-enc-id0",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","rtc-battery-voltage-read-enable","","power-chassis-control","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"fpga-pgood","power-chassis-good","pch-pgood","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+
+	pin-gpio-hog-0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "RST_RTCRST_N";
+	};
+
+	pin-gpio-hog-1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(L, 5) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "RST_SRTCRST_N";
+	};
+
+	pin-gpio-hog-2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(L, 6) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_FAN_E3_SVC_PEX_INT_N";
+	};
+
+	pin-gpio-hog-3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 6) GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "isolate_errs_cpu1";
+	};
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&pinctrl_emmc_default {
+	bias-disable;
+};
+
+&emmc {
+	status = "okay";
+	clk-phase-mmc-hs200 = <180>, <180>;
+};
+
+&sgpiom0 {
+	status = "okay";
+	ngpios = <128>;
+	bus-frequency = <500000>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
+		 <&syscon ASPEED_CLK_MAC4RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&peci0 {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>, <0x81>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	regulator@42 {
+		compatible = "infineon,ir38263";
+		reg = <0x42>;
+	};
+
+	led-controller@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "nic1-perst";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "bmc-perst";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "reset-M2-SSD1-2-perst";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "pcie-perst1";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "pcie-perst2";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "pcie-perst3";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "pcie-perst4";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "pcie-perst5";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "pcie-perst6";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "pcie-perst7";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "pcie-perst8";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "PV-cp0-sw1stk4-perst";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "PV-cp0-sw1stk5-perst";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "pe-cp-drv0-perst";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "pe-cp-drv1-perst";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "lom-perst";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	gpio@74 {
+		compatible = "nxp,pca9539";
+		reg = <0x74>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"PLUG_DETECT_PCIE_J101_N",
+			"PLUG_DETECT_PCIE_J102_N",
+			"PLUG_DETECT_PCIE_J103_N",
+			"PLUG_DETECT_PCIE_J104_N",
+			"PLUG_DETECT_PCIE_J105_N",
+			"PLUG_DETECT_PCIE_J106_N",
+			"PLUG_DETECT_PCIE_J107_N",
+			"PLUG_DETECT_PCIE_J108_N",
+			"PLUG_DETECT_M2_SSD1_N",
+			"PLUG_DETECT_NIC1_N",
+			"SEL_SMB_DIMM_CPU0",
+			"presence-ps2",
+			"presence-ps3",
+			"", "",
+			"PWRBRD_PLUG_DETECT2_N";
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	power-supply@58 {
+		compatible = "intel,crps185";
+		reg = <0x58>;
+	};
+
+	power-supply@59 {
+		compatible = "intel,crps185";
+		reg = <0x59>;
+	};
+
+	power-supply@5a {
+		compatible = "intel,crps185";
+		reg = <0x5a>;
+	};
+
+	power-supply@5b {
+		compatible = "intel,crps185";
+		reg = <0x5b>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c3mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c3mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c3mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c3mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		i2c3mux0chn4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		i2c3mux0chn5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		i2c3mux0chn6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		i2c3mux0chn7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	multi-master;
+	bus-frequency = <1000000>;
+
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+
+		i2c-protocol;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	regulator@42 {
+		compatible = "infineon,ir38263";
+		reg = <0x42>;
+	};
+
+	regulator@43 {
+		compatible = "infineon,ir38060";
+		reg = <0x43>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	fan-controller@52 {
+		compatible = "maxim,max31785a";
+		reg = <0x52>;
+	};
+
+	fan-controller@54 {
+		compatible = "maxim,max31785a";
+		reg = <0x54>;
+	};
+
+	eeprom@55 {
+		compatible = "atmel,24c64";
+		reg = <0x55>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c6mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c6mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c6mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c6mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		i2c6mux0chn4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			humidity-sensor@40 {
+				compatible = "ti,hdc1080";
+				reg = <0x40>;
+			};
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp275";
+				reg = <0x48>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+
+			led-controller@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "enclosure-id-led";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "attention-led";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@2 {
+					label = "enclosure-fault-rollup-led";
+					reg = <2>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@3 {
+					label = "power-on-led";
+					reg = <3>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+
+			temperature-sensor@76 {
+				compatible = "infineon,dps310";
+				reg = <0x76>;
+			};
+		};
+
+		i2c6mux0chn5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		i2c6mux0chn6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		i2c6mux0chn7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+
+	pca3: gpio@74 {
+		compatible = "nxp,pca9539";
+		reg = <0x74>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca4: gpio@77 {
+		compatible = "nxp,pca9539";
+		reg = <0x77>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"PE_NVMED0_EXP_PRSNT_N",
+			"PE_NVMED1_EXP_PRSNT_N",
+			"PE_NVMED2_EXP_PRSNT_N",
+			"PE_NVMED3_EXP_PRSNT_N",
+			"LED_FAULT_NVMED0",
+			"LED_FAULT_NVMED1",
+			"LED_FAULT_NVMED2",
+			"LED_FAULT_NVMED3",
+			"FAN0_PRESENCE_R_N",
+			"FAN1_PRESENCE_R_N",
+			"FAN2_PRESENCE_R_N",
+			"FAN3_PRESENCE_R_N",
+			"FAN4_PRESENCE_R_N",
+			"FAN5_PRESENCE_N",
+			"FAN6_PRESENCE_N",
+			"";
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c7mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c7mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c7mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c7mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			regulator@58 {
+				compatible = "mps,mp2973";
+				reg = <0x58>;
+			};
+		};
+
+		i2c7mux0chn4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		i2c7mux0chn5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			regulator@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+			};
+		};
+
+		i2c7mux0chn6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		i2c7mux0chn7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+	bus-frequency = <400000>;
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9548";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c8mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			regulator@58 {
+				compatible = "mps,mp2971";
+				reg = <0x58>;
+			};
+		};
+
+		i2c8mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			regulator@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+			};
+
+			regulator@41 {
+				compatible = "infineon,tda38640";
+				reg = <0x41>;
+			};
+
+			regulator@58 {
+				compatible = "mps,mp2971";
+				reg = <0x58>;
+			};
+
+			regulator@5b {
+				compatible = "mps,mp2971";
+				reg = <0x5b>;
+			};
+		};
+
+		i2c8mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c8mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		i2c8mux0chn4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				i2c8mux1chn0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				i2c8mux1chn1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				i2c8mux1chn2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				i2c8mux1chn3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				i2c8mux1chn4: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				i2c8mux1chn5: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				i2c8mux1chn6: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				i2c8mux1chn7: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		i2c8mux0chn5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		i2c8mux0chn6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			temperature-sensor@4c {
+				compatible = "ti,tmp432";
+				reg = <0x4c>;
+			};
+		};
+
+		i2c8mux0chn7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			regulator@40 {
+				compatible = "infineon,ir38060";
+				reg = <0x40>;
+			};
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	regulator@40 {
+		compatible = "infineon,ir38263";
+		reg = <0x40>;
+	};
+
+	regulator@41 {
+		compatible = "infineon,ir38263";
+		reg = <0x41>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	tpm@2e {
+		compatible = "tcg,tpm-tis-i2c";
+		reg = <0x2e>;
+		memory-region = <&eventlog>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+
+	regulator@41 {
+		compatible = "infineon,ir38263";
+		reg = <0x41>;
+	};
+
+	led-controller@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "efuse-12v-slots";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "efuse-3p3v-slot";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "nic2-pert";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "pcie-perst9";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "pcie-perst10";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "pcie-perst11";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "pcie-perst12";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "pcie-perst13";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "pcie-perst14";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "pcie-perst15";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "pcie-perst16";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "PV-cp1-sw1stk4-perst";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "PV-cp1-sw1stk5-perst";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "pe-cp-drv2-perst";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "pe-cp-drv3-perst";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	gpio@75 {
+		compatible = "nxp,pca9539";
+		reg = <0x75>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"PLUG_DETECT_PCIE_J109_N",
+			"PLUG_DETECT_PCIE_J110_N",
+			"PLUG_DETECT_PCIE_J111_N",
+			"PLUG_DETECT_PCIE_J112_N",
+			"PLUG_DETECT_PCIE_J113_N",
+			"PLUG_DETECT_PCIE_J114_N",
+			"PLUG_DETECT_PCIE_J115_N",
+			"PLUG_DETECT_PCIE_J116_N",
+			"PLUG_DETECT_M2_SSD2_N",
+			"PLUG_DETECT_NIC2_N",
+			"SEL_SMB_DIMM_CPU1",
+			"presence-ps0",
+			"presence-ps1",
+			"", "",
+			"PWRBRD_PLUG_DETECT1_N";
+	};
+
+	gpio@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"SW1_BOOTRCVRYB1_N",
+			"SW1_BOOTRCVRYB0_N",
+			"SW2_BOOTRCVRYB1_N",
+			"SW2_BOOTRCVRYB0_N",
+			"SW3_4_BOOTRCVRYB1_N",
+			"SW3_4_BOOTRCVRYB0_N",
+			"SW5_BOOTRCVRYB1_N",
+			"SW5_BOOTRCVRYB0_N",
+			"SW6_BOOTRCVRYB1_N",
+			"SW6_BOOTRCVRYB0_N",
+			"SW1_RESET_N",
+			"SW3_RESET_N",
+			"SW4_RESET_N",
+			"SW2_RESET_N",
+			"SW5_RESET_N",
+			"SW6_RESET_N";
+	};
+};
+
+&i2c14 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c14mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c14mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c14mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c14mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			regulator@58 {
+				compatible = "mps,mp2973";
+				reg = <0x58>;
+			};
+		};
+
+		i2c14mux0chn4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		i2c14mux0chn5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			regulator@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+			};
+		};
+
+		i2c14mux0chn6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		i2c14mux0chn7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c15 {
+	status = "okay";
+	bus-frequency = <400000>;
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9548";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c15mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			regulator@58 {
+				compatible = "mps,mp2971";
+				reg = <0x58>;
+			};
+		};
+
+		i2c15mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			regulator@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+			};
+
+			regulator@41 {
+				compatible = "infineon,tda38640";
+				reg = <0x41>;
+			};
+
+			regulator@58 {
+				compatible = "mps,mp2971";
+				reg = <0x58>;
+			};
+
+			regulator@5b {
+				compatible = "mps,mp2971";
+				reg = <0x5b>;
+			};
+		};
+
+		i2c15mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c15mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		i2c15mux0chn4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				i2c15mux1chn0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				i2c15mux1chn1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				i2c15mux1chn2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				i2c15mux1chn3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				i2c15mux1chn4: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				i2c15mux1chn5: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				i2c15mux1chn6: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				i2c15mux1chn7: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		i2c15mux0chn5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		i2c15mux0chn6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			temperature-sensor@4c {
+				compatible = "ti,tmp432";
+				reg = <0x4c>;
+			};
+		};
+
+		i2c15mux0chn7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			regulator@40 {
+				compatible = "infineon,ir38060";
+				reg = <0x40>;
+			};
+
+			temperature-sensor@4c {
+				compatible = "ti,tmp432";
+				reg = <0x4c>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts
index 1752f3250e44..79c6919b3570 100644
--- a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts
@@ -3,6 +3,7 @@
 #include "aspeed-g5.dtsi"
 #include <dt-bindings/gpio/aspeed-gpio.h>
 #include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	model = "FP5280G2 BMC";
@@ -53,10 +54,9 @@
 	};
 
 	fsi: gpio-fsi {
-		compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master";
+		compatible = "aspeed,ast2500-cf-fsi-master";
 		#address-cells = <2>;
 		#size-cells = <0>;
-		no-gpio-delays;
 
 		memory-region = <&coldfire_memory>;
 		aspeed,sram = <&sram>;
@@ -72,19 +72,19 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		checkstop {
+		event-checkstop {
 			label = "checkstop";
 			gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(B, 3)>;
 		};
 
-		ps0-presence {
+		event-ps0-presence {
 			label = "ps0-presence";
 			gpios = <&gpio ASPEED_GPIO(F, 0) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(F, 0)>;
 		};
 
-		ps1-presence {
+		event-ps1-presence {
 			label = "ps1-presence";
 			gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(F, 1)>;
@@ -96,49 +96,49 @@
 		compatible = "gpio-keys-polled";
 		poll-interval = <1000>;
 
-		fan0-presence {
+		event-fan0-presence {
 			label = "fan0-presence";
 			gpios = <&pca1 0 GPIO_ACTIVE_LOW>;
 			linux,code = <1>;
 		};
 
-		fan1-presence {
+		event-fan1-presence {
 			label = "fan1-presence";
 			gpios = <&pca1 1 GPIO_ACTIVE_LOW>;
 			linux,code = <2>;
 		};
 
-		fan2-presence {
+		event-fan2-presence {
 			label = "fan2-presence";
 			gpios = <&pca1 2 GPIO_ACTIVE_LOW>;
 			linux,code = <3>;
 		};
 
-		fan3-presence {
+		event-fan3-presence {
 			label = "fan3-presence";
 			gpios = <&pca1 3 GPIO_ACTIVE_LOW>;
 			linux,code = <4>;
 		};
 
-		fan4-presence {
+		event-fan4-presence {
 			label = "fan4-presence";
 			gpios = <&pca1 4 GPIO_ACTIVE_LOW>;
 			linux,code = <5>;
 		};
 
-		fan5-presence {
+		event-fan5-presence {
 			label = "fan5-presence";
 			gpios = <&pca1 5 GPIO_ACTIVE_LOW>;
 			linux,code = <6>;
 		};
 
-		fan6-presence {
+		event-fan6-presence {
 			label = "fan6-presence";
 			gpios = <&pca1 6 GPIO_ACTIVE_LOW>;
 			linux,code = <7>;
 		};
 
-		fan7-presence {
+		event-fan7-presence {
 			label = "fan7-presence";
 			gpios = <&pca1 7 GPIO_ACTIVE_LOW>;
 			linux,code = <8>;
@@ -245,7 +245,7 @@
 		label = "bmc";
 		m25p,fast-read;
 		spi-max-frequency = <50000000>;
-#include "openbmc-flash-layout.dtsi"
+#include "openbmc-flash-layout-64.dtsi"
 	};
 };
 
@@ -347,7 +347,7 @@
 		label = "outlet";
 	};
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
 		#address-cells = <1>;
@@ -431,7 +431,7 @@
 &i2c7 {
 	status = "okay";
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
 		#address-cells = <1>;
@@ -813,10 +813,6 @@
 	memory-region = <&gfx_memory>;
 };
 
-&pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-};
-
 &wdt1 {
 	aspeed,reset-type = "none";
 	aspeed,external-signal;
@@ -902,4 +898,10 @@
 
 };
 
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
+
 #include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-nf5280m6.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-nf5280m6.dts
index b3c1e3ba5831..92b9b3987c92 100644
--- a/arch/arm/boot/dts/aspeed-bmc-inspur-nf5280m6.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-nf5280m6.dts
@@ -215,7 +215,7 @@
 		label = "outlet";
 	};
 
-	pca9548@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		reg = <0x70>;
 	};
@@ -224,17 +224,17 @@
 &i2c3 {
 	status = "okay";
 
-	pca9548@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		reg = <0x70>;
 	};
 
-	pca9548@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9548";
 		reg = <0x71>;
 	};
 
-	pca9548@72 {
+	i2c-mux@72 {
 		compatible = "nxp,pca9548";
 		reg = <0x72>;
 	};
@@ -248,7 +248,7 @@
 &i2c5 {
 	status = "okay";
 
-	pca9548@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		reg = <0x70>;
 	};
@@ -257,7 +257,7 @@
 &i2c6 {
 	status = "okay";
 
-	pca9548@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		reg = <0x70>;
 	};
diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-on5263m5.dts
index 5a98a19f445e..7a78c34cff40 100644
--- a/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-on5263m5.dts
@@ -123,10 +123,6 @@
 	status = "okay";
 };
 
-&pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-};
-
 &pwm_tacho {
 	status = "okay";
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-intel-s2600wf.dts
index d5b7d28cda88..da55e7b29fac 100644
--- a/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-intel-s2600wf.dts
@@ -118,10 +118,6 @@
 	status = "okay";
 };
 
-&pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-};
-
 &pwm_tacho {
 	status = "okay";
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-starscream.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-starscream.dts
new file mode 100644
index 000000000000..ec82af94e1fb
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-starscream.dts
@@ -0,0 +1,389 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2023 Inventec Corp.
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include "aspeed-g6-pinctrl.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "STARSCREAM BMC";
+	compatible = "inventec,starscream-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		video_engine_memory: video {
+			size = <0x04000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-uid {
+			label = "UID_LED";
+			gpios = <&gpio0 186 GPIO_ACTIVE_LOW>;
+		};
+
+		led-heartbeat {
+			label = "HB_LED";
+			gpios = <&gpio0 127 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	phy-mode = "rmii";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii4_default>;
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+#include "openbmc-flash-layout.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc2";
+		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bios";
+		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xca2>;
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+&i2c1 {
+	status = "okay";
+};
+&i2c2 {
+	status = "okay";
+};
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	// I2C EXPANDER
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			// AMD SB-TSI CPU1
+			sbtsi@4c {
+				compatible = "amd,sbtsi";
+				reg = <0x4c>;
+			};
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			// AMD SB-TSI CPU2
+			sbtsi@48 {
+				compatible = "amd,sbtsi";
+				reg = <0x48>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	// I2C EXPANDER U153
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+
+		usb_hub: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		riser1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		riser2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	// Motherboard Temp_U89
+	temperature-sensor@4e {
+		compatible = "ti,tmp421";
+		reg = <0x4e>;
+	};
+
+	// RunBMC Temp_U6
+	temperature-sensor@49 {
+		compatible = "ti,tmp75";
+		reg = <0x49>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+	// I2C EXPANDER U40
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+	// FRU RunBMC
+	eeprom@51 {
+		compatible = "atmel,24c512";
+		reg = <0x51>;
+		pagesize = <128>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+	// FRU SCM
+	eeprom@51 {
+		compatible = "atmel,24c512";
+		reg = <0x51>;
+		pagesize = <128>;
+	};
+
+	// SCM Temp_U17
+	temperature-sensor@4f {
+		compatible = "ti,tmp75";
+		reg = <0x4f>;
+	};
+};
+
+&gpio0 {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/   "","","","","","","","",
+	/*B0-B7*/   "alert-psu0-smb-r-n","bmc-ready","","assert-cpu0-prochot-r-n",
+	"","","","",
+	/*C0-C7*/   "","","","","","","","",
+	/*D0-D7*/   "","","","","","","","",
+	/*E0-E7*/   "","","","","","","","",
+	/*F0-F7*/   "","","","","reset-sgpio-r-n","","","",
+	/*G0-G7*/   "","","scm-jtag-mux-select","","","","","",
+	/*H0-H7*/   "","","","","reset-out","power-out","","",
+	/*I0-I7*/   "","","","","","","irq-bmc-cpu0-buf-nmi-n","",
+	/*J0-J7*/   "","","","","","","","",
+	/*K0-K7*/   "","","","","","","","",
+	/*L0-L7*/   "","","","","","","","",
+	/*M0-M7*/   "","","","","","","","",
+	/*N0-N7*/   "","","ncsi-ocp-clk-en-n","","","","","",
+	/*O0-O7*/   "","","","","","","cpu1-thermal-trip-n","",
+	/*P0-P7*/   "","","","","","","","",
+	/*Q0-Q7*/   "cpu0-prochot-n","","cpu1-prochot-n","","cpu0-pe-rst0","","","",
+	/*R0-R7*/   "","","","","","","","",
+	/*S0-S7*/   "","","","",
+	"","PCH_SLP_S4_BMC_N","cpu0-thermtrip-n","alert-psu1-smb-r-n",
+	/*T0-T7*/   "","","","","","","","",
+	/*U0-U7*/   "","","","","","","","",
+	/*V0-V7*/   "bios-recovery-buf-n","","assert-cpu1-prochot-r-n","",
+	"power-chassis-good","","","",
+	/*W0-W7*/   "","","","","","","","",
+	/*X0-X7*/   "","","","","platform-type","","","",
+	/*Y0-Y7*/   "","","","","","","","",
+	/*Z0-Z7*/   "","cpld-power-break-n","","","","","","",
+	/*AA0-AA7*/ "","","","","","","","",
+	/*AB0-AB7*/ "","","","","","","","",
+	/*AC0-AC7*/ "","","","","","","","";
+};
+
+&sgpiom0 {
+	status = "okay";
+	ngpios = <64>;
+	bus-frequency = <1000000>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+	non-removable;
+	max-frequency = <52000000>;
+	bus-width = <8>;
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&vhub {
+	status = "okay";
+	aspeed,vhub-downstream-ports = <7>;
+	aspeed,vhub-generic-endpoints = <21>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb2ad_default>;
+};
+
+&rtc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-transformers.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-transformers.dts
new file mode 100644
index 000000000000..c713cb7a6187
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-transformers.dts
@@ -0,0 +1,328 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2021 Inventec Corp.
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include "aspeed-g6-pinctrl.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+       model = "TRANSFORMERS BMC";
+       compatible = "inventec,transformer-bmc", "aspeed,ast2600";
+
+       aliases {
+               serial4 = &uart5;
+       };
+
+       chosen {
+               stdout-path = &uart5;
+               bootargs = "console=ttyS4,115200n8";
+       };
+
+       memory@80000000 {
+               device_type = "memory";
+               reg = <0x80000000 0x80000000>;
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               // UID led
+               uid {
+                       label = "UID_LED";
+                       gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
+               };
+
+               // Heart beat led
+               heartbeat {
+                       label = "HB_LED";
+                       gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&mdio0 {
+       status = "okay";
+
+       ethphy0: ethernet-phy@0 {
+               compatible = "ethernet-phy-ieee802.3-c22";
+               reg = <1>;
+       };
+};
+
+&mac3 {
+       status = "okay";
+       phy-mode = "rgmii";
+       phy-handle = <&ethphy0>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_rgmii4_default>;
+};
+
+&fmc {
+       status = "okay";
+
+       flash@0 {
+               status = "okay";
+               m25p,fast-read;
+               label = "bmc";
+               spi-max-frequency = <33000000>;
+               spi-tx-bus-width = <2>;
+               spi-rx-bus-width = <2>;
+#include "openbmc-flash-layout.dtsi"
+       };
+
+       flash@1 {
+               status = "okay";
+               m25p,fast-read;
+               label = "bmc2";
+               spi-max-frequency = <33000000>;
+               spi-tx-bus-width = <2>;
+               spi-rx-bus-width = <2>;
+       };
+};
+
+&spi1 {
+       status = "okay";
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_spi1_default>;
+
+       flash@0 {
+               status = "okay";
+               m25p,fast-read;
+               label = "bios";
+               spi-max-frequency = <33000000>;
+               spi-tx-bus-width = <1>;
+               spi-rx-bus-width = <1>;
+       };
+};
+
+&wdt1 {
+       status = "okay";
+};
+
+&uart1 {
+       status = "okay";
+};
+
+&uart5 {
+       status = "okay";
+};
+
+&i2c0 {
+       status = "okay";
+
+       //Set bmc' slave address;
+       bmc_slave@10 {
+               compatible = "ipmb-dev";
+               reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+               i2c-protocol;
+       };
+};
+
+&i2c2 {
+       status = "okay";
+};
+
+&i2c3 {
+       // FRU AT24C512C-SSHM-T
+       status = "okay";
+       eeprom@50 {
+               compatible = "atmel,24c512";
+               reg = <0x50>;
+               pagesize = <128>;
+       };
+};
+
+&i2c5 {
+       status = "okay";
+};
+
+&i2c6 {
+       status = "okay";
+
+       tmp75@49 {
+               compatible = "ti,tmp75";
+               reg = <0x49>;
+       };
+
+       tmp75@4f {
+               compatible = "ti,tmp75";
+               reg = <0x4f>;
+       };
+
+       tmp468@48 {
+               compatible = "ti,tmp468";
+               reg = <0x48>;
+       };
+};
+
+&i2c7 {
+       status = "okay";
+       adm1278@40 {
+               compatible = "adi,adm1278";
+               reg = <0x40>;
+       };
+};
+
+
+&i2c8 {
+       // FRU AT24C512C-SSHM-T
+       status = "okay";
+
+       eeprom@51 {
+               compatible = "atmel,24c512";
+               reg = <0x51>;
+               pagesize = <128>;
+       };
+
+       eeprom@53 {
+               compatible = "atmel,24c512";
+               reg = <0x53>;
+               pagesize = <128>;
+       };
+};
+
+&i2c9 {
+       // M.2
+       status = "okay";
+};
+
+&i2c10 {
+       // I2C EXPANDER
+       status = "okay";
+
+       i2c-mux@71 {
+               compatible = "nxp,pca9544";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0x71>;
+       };
+
+       i2c-mux@73 {
+               compatible = "nxp,pca9544";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0x73>;
+       };
+};
+
+&i2c11 {
+       // I2C EXPANDER
+       status = "okay";
+
+       i2c-mux@70 {
+               compatible = "nxp,pca9544";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0x70>;
+
+               pcie_eeprom_riser1: i2c@0 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <0>;
+
+                       eeprom@55 {
+                               compatible = "atmel,24c512";
+                               reg = <0x55>;
+                               pagesize = <128>;
+                       };
+               };
+
+               pcie_eeprom_riser2: i2c@1 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <1>;
+
+                       eeprom@55 {
+                               compatible = "atmel,24c512";
+                               reg = <0x55>;
+                               pagesize = <128>;
+                       };
+               };
+
+               pcie_eeprom_riser3: i2c@2 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <2>;
+
+                       eeprom@55 {
+                               compatible = "atmel,24c512";
+                               reg = <0x55>;
+                               pagesize = <128>;
+                       };
+               };
+       };
+};
+
+&i2c12 {
+       status = "okay";
+
+       psu0:psu0@58 {
+               compatible = "pmbus";
+               reg = <0x58>;
+       };
+};
+
+&gpio0 {
+       status = "okay";
+       gpio-line-names =
+       /*A0-A7*/   "","","","","","","","",
+       /*B0-B7*/   "presence-ps0","power-chassis-good","","","","","presence-ps1","",
+       /*C0-C7*/   "","","","","","","","",
+       /*D0-D7*/   "","","","","","","","",
+       /*E0-E7*/   "","","","","","","","",
+       /*F0-F7*/   "","","","","power-chassis-control","","","",
+       /*G0-G7*/   "","","jtag-mux","","","","","",
+       /*H0-H7*/   "","","","","reset-button","power-button","","",
+       /*I0-I7*/   "","","","","","","","",
+       /*J0-J7*/   "","","","","","","","",
+       /*K0-K7*/   "","","","","","","","",
+       /*L0-L7*/   "","","","","","","","",
+       /*M0-M7*/   "","","","","","","","",
+       /*N0-N7*/   "","","","","","","","",
+       /*O0-O7*/   "","","","","","","","",
+       /*P0-P7*/   "","","","tck-mux","","","","",
+       /*Q0-Q7*/   "","","","","","","","",
+       /*R0-R7*/   "","","","","","","","",
+       /*S0-S7*/   "","","","","","","","",
+       /*T0-T7*/   "","","","","","","","",
+       /*U0-U7*/   "","nmi-button","","","","","","",
+       /*V0-V7*/   "","","","","power-config-full-load","","","",
+       /*W0-W7*/   "","","","","","","","",
+       /*X0-X7*/   "","","","","","","","",
+       /*Y0-Y7*/   "","","","","","","","",
+       /*Z0-Z7*/   "","","","","","","","",
+       /*AA0-AA7*/ "","","","","","","","",
+       /*AB0-AB7*/ "","","","","","","","",
+       /*AC0-AC7*/ "","","","","","","","";
+};
+
+&lpc_snoop {
+       status = "okay";
+       snoop-ports = <0x80>;
+};
+
+&emmc_controller {
+       status = "okay";
+};
+
+&emmc {
+       status = "okay";
+       non-removable;
+       max-frequency = <52000000>;
+       bus-width = <8>;
+};
+
+&vhub {
+       status = "okay";
+       aspeed,vhub-downstream-ports = <7>;
+       aspeed,vhub-generic-endpoints = <21>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usb2ad_default>;
+};
+
+&rtc {
+       status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr630.dts
index 8f543cca7c21..4ad0f44af1ab 100644
--- a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr630.dts
@@ -208,7 +208,7 @@
 	 *	Slot 3
 	 */
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9545";
 		reg = <0x70>;
 		#address-cells = <1>;
@@ -249,7 +249,7 @@
 	 *	Slot 2,
 	 *	Slot 3
 	 */
-	i2c-switch@76 {
+	i2c-mux@76 {
 		compatible = "nxp,pca9546";
 		reg = <0x76>;
 		#address-cells = <1>;
@@ -405,161 +405,161 @@
 
 &gpio {
 
-	pin_gpio_b5 {
+	pin-gpio-b5-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "IRQ_BMC_PCH_SMI_LPC_N";
 	};
 
-	pin_gpio_f0 {
+	pin-gpio-f0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 0) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "IRQ_BMC_PCH_NMI_R";
 	};
 
-	pin_gpio_f3 {
+	pin-gpio-f3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 3) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "I2C_BUS0_RST_OUT_N";
 	};
 
-	pin_gpio_f4 {
+	pin-gpio-f4-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "FM_SKT0_FAULT_LED";
 	};
 
-	pin_gpio_f5 {
+	pin-gpio-f5-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 5) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "FM_SKT1_FAULT_LED";
 	};
 
-	pin_gpio_g4 {
+	pin-gpio-g4-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "FAN_PWR_CTL_N";
 	};
 
-	pin_gpio_g7 {
+	pin-gpio-g7-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(G, 7) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "RST_BMC_PCIE_I2CMUX_N";
 	};
 
-	pin_gpio_h2 {
+	pin-gpio-h2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "PSU1_FFS_N_R";
 	};
 
-	pin_gpio_h3 {
+	pin-gpio-h3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "PSU2_FFS_N_R";
 	};
 
-	pin_gpio_i3 {
+	pin-gpio-i3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_INTRUDED_COVER";
 	};
 
-	pin_gpio_j2 {
+	pin-gpio-j2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(J, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_BIOS_UPDATE_N";
 	};
 
-	pin_gpio_j3 {
+	pin-gpio-j3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(J, 3) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "RST_BMC_HDD_I2CMUX_N";
 	};
 
-	pin_gpio_s2 {
+	pin-gpio-s2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_VGA_SW";
 	};
 
-	pin_gpio_s4 {
+	pin-gpio-s4-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(S, 4) GPIO_ACTIVE_HIGH>;
 		output;
 		line-name = "VBAT_EN_N";
 	};
 
-	pin_gpio_s6 {
+	pin-gpio-s6-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "PU_BMC_GPIOS6";
 	};
 
-	pin_gpio_y0 {
+	pin-gpio-y0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(Y, 0) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "BMC_NCSI_MUX_CTL_S0";
 	};
 
-	pin_gpio_y1 {
+	pin-gpio-y1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(Y, 1) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "BMC_NCSI_MUX_CTL_S1";
 	};
 
-	pin_gpio_z0 {
+	pin-gpio-z0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(Z, 0) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "I2C_RISER2_INT_N";
 	};
 
-	pin_gpio_z2 {
+	pin-gpio-z2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "I2C_RISER2_RESET_N";
 	};
 
-	pin_gpio_z3 {
+	pin-gpio-z3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "FM_BMC_PCH_SCI_LPC_N";
 	};
 
-	pin_gpio_z7 {
+	pin-gpio-z7-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(Z, 7) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "BMC_POST_CMPLT_N";
 	};
 
-	pin_gpio_aa0 {
+	pin-gpio-aa0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "HOST_BMC_USB_SEL";
 	};
 
-	pin_gpio_aa5 {
+	pin-gpio-aa5-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(AA, 5) GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr855xg2.dts
index bcc1820f5c07..fdcf4492fb4e 100644
--- a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr855xg2.dts
@@ -151,7 +151,7 @@
 	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
 };
 
-&adc{
+&adc {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_adc0_default
@@ -175,7 +175,7 @@
 &i2c0 {
 	status = "okay";
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9545";
 		reg = <0x70>;
 		#address-cells = <1>;
@@ -211,7 +211,7 @@
 	status = "okay";
 	bus-frequency = <90000>;
 	HotSwap@10 {
-		compatible = "adm1272";
+		compatible = "adi,adm1272";
 		reg = <0x10>;
 	};
 
@@ -227,7 +227,7 @@
 
 &i2c3 {
 	status = "okay";
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
 		#address-cells = <1>;
@@ -425,238 +425,238 @@
 
 &gpio {
 
-	pin_gpio_a1 {
+	pin-gpio-a1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(A, 1) GPIO_ACTIVE_LOW>;
 		output-high;
 		line-name = "BMC_EMMC_RST_N";
 	};
 
-	pin_gpio_a3 {
+	pin-gpio-a3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(A, 3) GPIO_ACTIVE_LOW>;
 		output-high;
 		line-name = "PCH_PWROK_BMC_FPGA";
 	};
 
-	pin_gpio_b5 {
+	pin-gpio-b5-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "IRQ_BMC_PCH_SMI_LPC_N";
 	};
 
-	pin_gpio_b7 {
+	pin-gpio-b7-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(B, 7) GPIO_ACTIVE_LOW>;
 		output-low;
 		line-name = "CPU_SM_WP";
 	};
 
-	pin_gpio_e0 {
+	pin-gpio-e0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(E, 0) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "PDB_PSU_SEL";
 	};
 
-	pin_gpio_e2 {
+	pin-gpio-e2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(E, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "LOCATOR_LED_N";
 	};
 
-	pin_gpio_e5 {
+	pin-gpio-e5-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "FM_BMC_DBP_PRESENT_R1_N";
 	};
 
-	pin_gpio_e6 {
+	pin-gpio-e6-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_ME_SECURITY_OVERRIDE_N";
 	};
 
-	pin_gpio_f0 {
+	pin-gpio-f0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 0) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "IRQ_BMC_PCH_NMI_R";
 	};
 
-	pin_gpio_f1 {
+	pin-gpio-f1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 1) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "CPU2_PROCDIS_BMC_N";
 	};
 
-	pin_gpio_f2 {
+	pin-gpio-f2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "RM_THROTTLE_EN_N";
 	};
 
-	pin_gpio_f3 {
+	pin-gpio-f3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 3) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "FM_PMBUS_ALERT_B_EN";
 	};
 
-	pin_gpio_f4 {
+	pin-gpio-f4-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_FORCE_NM_THROTTLE_N";
 	};
 
-	pin_gpio_f6 {
+	pin-gpio-f6-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 6) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "FM_BMC_CPU_PWR_DEBUG_N";
 	};
 
-	pin_gpio_g7 {
+	pin-gpio-g7-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(G, 7) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_PCIE_I2C_MUX_RST_N";
 	};
 
-	pin_gpio_h6 {
+	pin-gpio-h6-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "FM_BMC_DBP_PRESENT_R2_N";
 	};
 
-	pin_gpio_i3 {
+	pin-gpio-i3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "SPI_BMC_BIOS_WP_N";
 	};
 
-	pin_gpio_j1 {
+	pin-gpio-j1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_USB_SEL";
 	};
 
-	pin_gpio_j2 {
+	pin-gpio-j2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(J, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "PDB_SMB_RST_N";
 	};
 
-	pin_gpio_j3 {
+	pin-gpio-j3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(J, 3) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "SPI_BMC_BIOS_HOLD_N";
 	};
 
-	pin_gpio_l0 {
+	pin-gpio-l0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(L, 0) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "PDB_FAN_TACH_SEL";
 	};
 
-	pin_gpio_l1 {
+	pin-gpio-l1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(L, 1) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "SYS_RESET_BMC_FPGA_N";
 	};
 
-	pin_gpio_l4 {
+	pin-gpio-l4-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "FM_EFUSE_FAN_G1_EN";
 	};
 
-	pin_gpio_l5 {
+	pin-gpio-l5-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(L, 5) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "FM_EFUSE_FAN_G2_EN";
 	};
 
-	pin_gpio_r6 {
+	pin-gpio-r6-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "CPU3_PROCDIS_BMC_N";
 	};
 
-	pin_gpio_r7 {
+	pin-gpio-r7-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "CPU4_PROCDIS_BMC_N";
 	};
 
-	pin_gpio_s1 {
+	pin-gpio-s1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(S, 1) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "DBP_SYSPWROK_BMC";
 	};
 
-	pin_gpio_s2 {
+	pin-gpio-s2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "PCH_RST_RSMRST_N";
 	};
 
-	pin_gpio_s6 {
+	pin-gpio-s6-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_HW_STRAP_5";
 	};
 
-	pin_gpio_z3 {
+	pin-gpio-z3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "FM_BMC_PCH_SCI_LPC_N";
 	};
 
-	pin_gpio_aa0 {
+	pin-gpio-aa0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "FW_PSU_ALERT_EN_N";
 	};
 
-	pin_gpio_aa4 {
+	pin-gpio-aa4-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(AA, 4) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "DBP_CPU_PREQ_N";
 	};
 
-	pin_gpio_ab3 {
+	pin-gpio-ab3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(AB, 3) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "BMC_WDTRST";
 	};
 
-	pin_gpio_ac6 {
+	pin-gpio-ac6-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(AC, 6) GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/aspeed-bmc-microsoft-olympus.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-microsoft-olympus.dts
index 3ef8358ff764..3ef8358ff764 100644
--- a/arch/arm/boot/dts/aspeed-bmc-microsoft-olympus.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-microsoft-olympus.dts
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts
new file mode 100644
index 000000000000..4de38613b0ea
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts
@@ -0,0 +1,1178 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "AST2600 GB200NVL BMC";
+	compatible = "nvidia,gb200nvl-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial2 = &uart3;
+		serial4 = &uart5;
+		i2c16   = &imux16;
+		i2c17   = &imux17;
+		i2c18   = &imux18;
+		i2c19   = &imux19;
+		i2c20   = &imux20;
+		i2c21   = &imux21;
+		i2c22   = &imux22;
+		i2c23   = &imux23;
+		i2c24   = &imux24;
+		i2c25   = &imux25;
+		i2c26   = &imux26;
+		i2c27   = &imux27;
+		i2c28   = &imux28;
+		i2c29   = &imux29;
+		i2c30   = &imux30;
+		i2c31   = &imux31;
+		i2c32   = &imux32;
+		i2c33   = &imux33;
+		i2c34   = &imux34;
+		i2c35   = &imux35;
+		i2c36   = &imux36;
+		i2c37   = &imux37;
+		i2c38   = &imux38;
+		i2c39   = &imux39;
+		i2c40	= &e1si2c0;
+		i2c41	= &e1si2c1;
+		i2c42	= &e1si2c2;
+		i2c43	= &e1si2c3;
+		i2c44	= &e1si2c4;
+		i2c45	= &e1si2c5;
+		i2c46	= &e1si2c6;
+		i2c47	= &e1si2c7;
+		i2c48	= &i2c17mux0;
+		i2c49	= &i2c17mux1;
+		i2c50	= &i2c17mux2;
+		i2c51	= &i2c17mux3;
+		i2c52	= &i2c25mux0;
+		i2c53	= &i2c25mux1;
+		i2c54	= &i2c25mux2;
+		i2c55	= &i2c25mux3;
+		i2c56	= &i2c29mux0;
+		i2c57	= &i2c29mux1;
+		i2c58	= &i2c29mux2;
+		i2c59	= &i2c29mux3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		ramoops@a0000000 {
+			compatible = "ramoops";
+			reg = <0xa0000000 0x100000>; /* 1MB */
+			record-size = <0x10000>; /* 64KB */
+			max-reason = <2>; /* KMSG_DUMP_OOPS */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-0 {
+			label = "uid_led";
+			gpios = <&sgpiom0 27 GPIO_ACTIVE_LOW>;
+		};
+		led-1 {
+			label = "fault_led";
+			gpios = <&sgpiom0 29 GPIO_ACTIVE_LOW>;
+		};
+		led-2 {
+			label = "power_led";
+			gpios = <&sgpiom0 31 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	buttons {
+		button-power {
+			label = "power-btn";
+			gpio = <&sgpiom0 156 GPIO_ACTIVE_LOW>;
+		};
+		button-uid {
+			label = "uid-btn";
+			gpio = <&sgpiom0 154 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	standby_power_regulator: standby-power-regulator {
+		status = "okay";
+		compatible = "regulator-fixed";
+		regulator-name = "standby_power";
+		gpio = <&gpio0 ASPEED_GPIO(M, 3) GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		enable-active-high;
+		regulator-always-on;
+	};
+};
+
+// Enable Primary flash on FMC for bring up activity
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		compatible = "jedec,spi-nor";
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			u-boot@0 {
+				// 896KB
+				reg = <0x0 0xe0000>;
+				label = "u-boot";
+			};
+
+			kernel@100000 {
+				// 9MB
+				reg = <0x100000 0x900000>;
+				label = "kernel";
+			};
+
+			rofs@a00000 {
+				// 55292KB (extends to end of 64MB SPI - 4KB)
+				reg = <0xa00000 0x35FF000>;
+				label = "rofs";
+			};
+		};
+	};
+};
+
+&spi2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2_default>;
+
+	// Data SPI is 64MB in size
+	flash@0 {
+		status = "okay";
+		label = "config";
+		spi-max-frequency = <50000000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			u-boot-env@0 {
+				// 256KB
+				reg = <0x0 0x40000>;
+				label = "u-boot-env";
+			};
+
+			rwfs@40000 {
+				// 16MB
+				reg = <0x40000 0x1000000>;
+				label = "rwfs";
+			};
+
+			log@1040000 {
+				// 40MB
+				reg = <0x1040000 0x2800000>;
+				label = "log";
+			};
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart3 {
+	// Enabling SOL
+	status = "okay";
+};
+
+&uart5 {
+	// BMC Debug Console
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&mdio0 {
+	status = "okay";
+	ethphy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mdio3 {
+	status = "okay";
+	ethphy3: ethernet-phy@2 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <2>;
+	};
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy3>;
+	pinctrl-0 = <&pinctrl_rgmii1_default>;
+};
+
+&mac2 {
+	status = "okay";
+	phy-mode = "rmii";
+	use-ncsi;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+};
+
+/*
+ * Enable USB port A as device (via the virtual hub) to host
+ */
+&vhub {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+// USB 2.0 to HMC, on USB Port B
+&ehci1 {
+	status = "okay";
+};
+
+// USB 1.0
+&uhci {
+	status = "okay";
+};
+
+&sgpiom0 {
+	status = "okay";
+	ngpios = <128>;
+	gpio-line-names =
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"RUN_POWER_FAULT_L-I","SYS_RST_IN_L-O",
+		"RUN_POWER_PG-I","PWR_BRAKE_L-O",
+		"SYS_RST_OUT_L-I","RUN_POWER_EN-O",
+		"L0L1_RST_REQ_OUT_L-I","SHDN_FORCE_L-O",
+		"L2_RST_REQ_OUT_L-I","SHDN_REQ_L-O",
+		"SHDN_OK_L-I","UID_LED_N-O",
+		"BMC_I2C1_FPGA_ALERT_L-I","SYS_FAULT_LED_N-O",
+		"BMC_I2C0_FPGA_ALERT_L-I","PWR_LED_N-O",
+		"FPGA_RSVD_FFU3-I","",
+		"FPGA_RSVD_FFU2-I","",
+		"FPGA_RSVD_FFU1-I","",
+		"FPGA_RSVD_FFU0-I","BMC_I2C_SSIF_ALERT_L-O",
+		"CPU_BOOT_DONE-I","JTAG_MUX_SELECT-O",
+		"SPI_BMC_FPGA_INT_L-I","RTC_CLR_L-O",
+		"THERM_BB_WARN_L-I","UART_MUX_SEL-O",
+		"THERM_BB_OVERT_L-I","",
+		"CPU0_UPHY3_PRSNT1_L-I","IOBRD0_RUN_POWER_EN-O",
+		"CPU0_UPHY3_PRSNT0_L-I","IOBRD1_RUN_POWER_EN-O",
+		"CPU0_UPHY2_PRSNT1_L-I","FPGA_RSVD_FFU4-O",
+		"CPU0_UPHY2_PRSNT0_L-I","FPGA_RSVD_FFU5-O",
+		"CPU0_UPHY1_PRSNT1_L-I","FPGA_RSVD_FFU6-O",
+		"CPU0_UPHY1_PRSNT0_L-I","FPGA_RSVD_FFU7-O",
+		"CPU0_UPHY0_PRSNT1_L-I","RSVD_NV_PLT_DETECT-O",
+		"CPU0_UPHY0_PRSNT0_L-I","SPI1_INT_L-O",
+		"CPU1_UPHY3_PRSNT1_L-I","",
+		"CPU1_UPHY3_PRSNT0_L-I","HMC_EROT_MUX_STATUS",
+		"CPU1_UPHY2_PRSNT1_L-I","",
+		"CPU1_UPHY2_PRSNT0_L-I","",
+		"CPU1_UPHY1_PRSNT1_L-I","",
+		"CPU1_UPHY1_PRSNT0_L-I","",
+		"CPU1_UPHY0_PRSNT1_L-I","",
+		"CPU1_UPHY0_PRSNT0_L-I","",
+		"FAN1_PRESENT_L-I","",
+		"FAN0_PRESENT_L-I","",
+		"","",
+		"IPEX_CABLE_PRSNT_L-I","",
+		"M2_1_PRSNT_L-I","",
+		"M2_0_PRSNT_L-I","",
+		"CPU1_UPHY4_PRSNT1_L-I","",
+		"CPU0_UPHY4_PRSNT0_L-I","",
+		"","",
+		"I2C_RTC_ALERT_L-I","",
+		"FAN7_PRESENT_L-I","",
+		"FAN6_PRESENT_L-I","",
+		"FAN5_PRESENT_L-I","",
+		"FAN4_PRESENT_L-I","",
+		"FAN3_PRESENT_L-I","",
+		"FAN2_PRESENT_L-I","",
+		"IOBRD0_IOX_INT_L-I","",
+		"IOBRD1_PRSNT_L-I","",
+		"IOBRD0_PRSNT_L-I","",
+		"IOBRD1_PWR_GOOD-I","",
+		"IOBRD0_PWR_GOOD-I","",
+		"","",
+		"","",
+		"FAN_FAIL_IN_L-I","",
+		"","",
+		"","",
+		"","",
+		"PDB_CABLE_PRESENT_L-I","",
+		"","",
+		"CHASSIS_PWR_BRK_L-I","",
+		"","",
+		"IOBRD1_IOX_INT_L-I","",
+		"10GBE_SMBALRT_L-I","",
+		"PCIE_WAKE_L-I","",
+		"I2C_M21_ALERT_L-I","",
+		"I2C_M20_ALERT_L-I","",
+		"TRAY_FAST_SHDN_L-I","",
+		"UID_BTN_N-I","",
+		"PWR_BTN_L-I","",
+		"PSU_SMB_ALERT_L-I","",
+		"","",
+		"","",
+		"NODE_LOC_ID[0]-I","",
+		"NODE_LOC_ID[1]-I","",
+		"NODE_LOC_ID[2]-I","",
+		"NODE_LOC_ID[3]-I","",
+		"NODE_LOC_ID[4]-I","",
+		"NODE_LOC_ID[5]-I","",
+		"FAN10_PRESENT_L-I","",
+		"FAN9_PRESENT_L-I","",
+		"FAN8_PRESENT_L-I","",
+		"FPGA1_READY_HMC-I","",
+		"DP_HPD-I","",
+		"HMC_I2C3_FPGA_ALERT_L-I","",
+		"HMC_I2C2_FPGA_ALERT_L-I","",
+		"FPGA0_READY_HMC-I","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"LEAK_DETECT_ALERT_L-I","",
+		"MOD1_B2B_CABLE_PRESENT_L-I","",
+		"MOD1_CLINK_CABLE_PRESENT_L-I","",
+		"FAN11_PRESENT_L-I","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"RSVD_SGPIO_IN_CRC[0]","RSVD_SGPIO_O_CRC[7]",
+		"RSVD_SGPIO_IN_CRC[1]","RSVD_SGPIO_O_CRC[6]",
+		"RSVD_SGPIO_IN_CRC[2]","RSVD_SGPIO_O_CRC[5]",
+		"RSVD_SGPIO_IN_CRC[3]","RSVD_SGPIO_O_CRC[4]",
+		"RSVD_SGPIO_IN_CRC[4]","RSVD_SGPIO_O_CRC[3]",
+		"RSVD_SGPIO_IN_CRC[5]","RSVD_SGPIO_O_CRC[2]",
+		"RSVD_SGPIO_IN_CRC[6]","RSVD_SGPIO_O_CRC[1]",
+		"RSVD_SGPIO_IN_CRC[7]","RSVD_SGPIO_O_CRC[0]";
+};
+
+// I2C1, SSIF IPMI interface
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ssif-bmc@10 {
+		compatible = "ssif-bmc";
+		reg = <0x10>;
+	};
+};
+
+// I2C2
+// BMC_I2C1_FPGA - Secondary FPGA
+// HMC EROT
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+	multi-master;
+};
+
+// I2C3
+// BMC_I2C0_FPGA - Primary FPGA
+// HMC FRU EEPROM
+&i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+	multi-master;
+};
+
+// I2C4
+&i2c3 {
+	status = "okay";
+};
+
+// I2C5
+// RTC Driver
+// IO Expander
+&i2c4 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	// Module 0, Expander @0x21
+	exp4: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&standby_power_regulator>;
+		gpio-line-names =
+			"RTC_MUX_SEL-O",
+			"PCI_MUX_SEL-O",
+			"TPM_MUX_SEL-O",
+			"FAN_MUX-SEL-O",
+			"SGMII_MUX_SEL-O",
+			"DP_MUX_SEL-O",
+			"UPHY3_USB_SEL-O",
+			"NCSI_MUX_SEL-O",
+			"BMC_PHY_RST-O",
+			"RTC_CLR_L-O",
+			"BMC_12V_CTRL-O",
+			"PS_RUN_IO0_PG-I",
+			"",
+			"",
+			"",
+			"";
+	};
+};
+
+// I2C6
+// Module 0/1 I2C MUX x3
+&i2c5 {
+	status = "okay";
+	clock-frequency = <400000>;
+	multi-master;
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-mux@74 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x74>;
+				i2c-mux-idle-disconnect;
+
+				i2c17mux0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				i2c17mux1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				i2c17mux2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				i2c17mux3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x72>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
+
+		imux20: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux21: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			gpio@21 {
+				compatible = "nxp,pca9555";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				vcc-supply = <&standby_power_regulator>;
+				gpio-line-names =
+					"RST_CX_0_L-O",
+					"RST_CX_1_L-O",
+					"CX0_SSD0_PRSNT_L-I",
+					"CX1_SSD1_PRSNT_L-I",
+					"CX_BOOT_CMPLT_CX0-I",
+					"CX_BOOT_CMPLT_CX1-I",
+					"CX_TWARN_CX0_L-I",
+					"CX_TWARN_CX1_L-I",
+					"CX_OVT_SHDN_CX0-I",
+					"CX_OVT_SHDN_CX1-I",
+					"FNP_L_CX0-O",
+					"FNP_L_CX1-O",
+					"",
+					"MCU_GPIO-I",
+					"MCU_RST_N-O",
+					"MCU_RECOVERY_N-O";
+			};
+		};
+
+		imux22: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux23: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@73 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x73>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+				vdd-supply = <&standby_power_regulator>;
+
+				i2c25mux0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				i2c25mux1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				i2c25mux2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				i2c25mux3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
+
+		imux28: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux29: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-mux@74 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x74>;
+				i2c-mux-idle-disconnect;
+
+				i2c29mux0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				i2c29mux1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				i2c29mux2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				i2c29mux3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		};
+
+		imux30: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux31: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@76 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x76>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
+
+		imux32: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux33: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			gpio@21 {
+				compatible = "nxp,pca9555";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				vcc-supply = <&standby_power_regulator>;
+				gpio-line-names =
+					"SEC_RST_CX_0_L-O",
+					"SEC_RST_CX_1_L-O",
+					"SEC_CX0_SSD0_PRSNT_L-I",
+					"SEC_CX1_SSD1_PRSNT_L-I",
+					"SEC_CX_BOOT_CMPLT_CX0-I",
+					"SEC_CX_BOOT_CMPLT_CX1-I",
+					"SEC_CX_TWARN_CX0_L-I",
+					"SEC_CX_TWARN_CX1_L-I",
+					"SEC_CX_OVT_SHDN_CX0-I",
+					"SEC_CX_OVT_SHDN_CX1-I",
+					"SEC_FNP_L_CX0-O",
+					"SEC_FNP_L_CX1-O",
+					"",
+					"SEC_MCU_GPIO-I",
+					"SEC_MCU_RST_N-O",
+					"SEC_MCU_RECOVERY_N-O";
+				};
+		};
+
+		imux34: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux35: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
+
+		imux36: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux37: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux38: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux39: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+// I2C7
+// Module 0/1 Leak Sensors
+// Module 0/1 Fan Controllers
+&i2c6 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	pmic@12 {
+		compatible = "ti,lm5066i";
+		reg = <0x12>;
+		shunt-resistor-micro-ohms = <190>;
+		status = "okay";
+	};
+
+	pmic@14 {
+		compatible = "ti,lm5066i";
+		reg = <0x14>;
+		shunt-resistor-micro-ohms = <190>;
+		status = "okay";
+	};
+
+	pwm@20 {
+		compatible = "maxim,max31790";
+		reg = <0x20>;
+	};
+
+	pwm@23 {
+		compatible = "maxim,max31790";
+		reg = <0x23>;
+	};
+
+	pwm@2c {
+		compatible = "maxim,max31790";
+		reg = <0x2c>;
+	};
+
+	pwm@2f {
+		compatible = "maxim,max31790";
+		reg = <0x2f>;
+	};
+};
+
+// I2C9
+// M.2
+&i2c8 {
+	status = "okay";
+	clock-frequency = <400000>;
+	multi-master;
+};
+
+// I2C10
+// HMC IO Expander
+// Module 0/1 IO Expanders
+&i2c9 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	// Module 0, Expander @0x20
+	exp0: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&standby_power_regulator>;
+		gpio-line-names =
+			"FPGA_THERM_OVERT_L-I",
+			"FPGA_READY_BMC-I",
+			"HMC_BMC_DETECT-O",
+			"HMC_PGOOD-O",
+			"",
+			"BMC_STBY_CYCLE-O",
+			"FPGA_EROT_FATAL_ERROR_L-I",
+			"WP_HW_EXT_CTRL_L-O",
+			"EROT_FPGA_RST_L-O",
+			"FPGA_EROT_RECOVERY_L-O",
+			"BMC_EROT_FPGA_SPI_MUX_SEL-O",
+			"USB_HUB_RESET_L-O",
+			"NCSI_CS1_SEL-O",
+			"SGPIO_EN_L-O",
+			"B2B_IOEXP_INT_L-I",
+			"I2C_BUS_MUX_RESET_L-O";
+	};
+
+	// Module 1, Expander @0x21
+	exp1: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&standby_power_regulator>;
+		gpio-line-names =
+			"SEC_FPGA_THERM_OVERT_L-I",
+			"SEC_FPGA_READY_BMC-I",
+			"",
+			"",
+			"",
+			"",
+			"SEC_FPGA_EROT_FATAL_ERROR_L-I",
+			"SEC_WP_HW_EXT_CTRL_L-O",
+			"SEC_EROT_FPGA_RST_L-O",
+			"SEC_FPGA_EROT_RECOVERY_L-O",
+			"SEC_BMC_EROT_FPGA_SPI_MUX_SEL-O",
+			"SEC_USB2_HUB_RST_L-O",
+			"",
+			"",
+			"",
+			"SEC_I2C_BUS_MUX_RESET_L-O";
+	};
+
+	// HMC Expander @0x27
+	exp2: gpio@27 {
+		compatible = "nxp,pca9555";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names =
+			"HMC_PRSNT_L-I",
+			"HMC_READY-I",
+			"HMC_EROT_FATAL_ERROR_L-I",
+			"I2C_MUX_SEL-O",
+			"HMC_EROT_SPI_MUX_SEL-O",
+			"HMC_EROT_RECOVERY_L-O",
+			"HMC_EROT_RST_L-O",
+			"GLOBAL_WP_HMC-O",
+			"FPGA_RST_L-O",
+			"USB2_HUB_RST-O",
+			"CPU_UART_MUX_SEL-O",
+			"",
+			"",
+			"",
+			"",
+			"";
+	};
+
+	// HMC Expander @0x74
+	exp3: gpio@74 {
+		compatible = "nxp,pca9555";
+		reg = <0x74>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&standby_power_regulator>;
+		gpio-line-names =
+			"IOB_PRSNT_L",
+			"IOB_DP_HPD",
+			"IOX_BMC_RESET",
+			"IOB_IOEXP_INT_L",
+			"IOB_UID_LED_L",
+			"IOB_UID_BTN_L",
+			"IOB_SYS_RST_BTN_L",
+			"IOB_PWR_LED_L",
+			"IOB_PWR_BTN_L",
+			"IOB_PHY_RST",
+			"CPLD_JTAG_MUX_SEL",
+			"",
+			"",
+			"",
+			"",
+			"";
+	};
+};
+
+// I2C11
+// BMC FRU EEPROM
+// BMC Temp Sensor
+&i2c10 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	// BMC FRU EEPROM - 256 bytes
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <8>;
+	};
+};
+
+// I2C12
+&i2c11 {
+	status = "disabled";
+};
+
+// I2C13
+&i2c12 {
+	status = "disabled";
+};
+
+// I2C14
+// Module 0 UPHY3 SMBus
+&i2c13 {
+	status = "disabled";
+};
+
+// I2C15
+// Module 1 UPHY3 SMBus
+&i2c14 {
+	status = "okay";
+	clock-frequency = <100000>;
+	multi-master;
+
+	//E1.S drive slot 0-3
+	i2c-mux@77 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
+
+		e1si2c0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		e1si2c1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		e1si2c2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		e1si2c3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+// I2C16
+&i2c15 {
+	status = "okay";
+	clock-frequency = <100000>;
+	multi-master;
+
+	//E1.S drive slot 4-7
+	i2c-mux@77 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
+
+		e1si2c4: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		e1si2c5: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		e1si2c6: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		e1si2c7: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&rng {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+		/*A0-A7*/ "", "", "", "", "", "", "", "",
+		/*B0-B7*/ "", "", "", "", "", "", "", "",
+		/*C0-C7*/ "SGPIO_I2C_MUX_SEL-O", "", "", "", "", "", "", "",
+		/*D0-D7*/ "", "", "", "UART1_MUX_SEL-O", "", "FPGA_PEX_RST_L-O", "", "",
+		/*E0-E7*/ "RTL8221_PHY_RST_L-O", "RTL8211_PHY_INT_L-I",	"", "UART3_MUX_SEL-O",
+					"", "", "", "SGPIO_BMC_EN-O",
+		/*F0-F7*/ "", "", "", "", "", "", "", "",
+		/*G0-G7*/ "", "", "", "", "", "", "", "",
+		/*H0-H7*/ "", "", "", "", "", "", "", "",
+		/*I0-I7*/ "", "", "", "", "", "QSPI2_RST_L-O", "GLOBAL_WP_BMC-O", "BMC_DDR4_TEN-O",
+		/*J0-J7*/ "", "", "", "", "", "", "", "",
+		/*K0-K7*/ "", "", "", "", "", "", "", "",
+		/*L0-L7*/ "", "", "", "", "", "", "", "",
+		/*M0-M7*/ "PCIE_EP_RST_EN-O", "BMC_FRU_WP-O", "FPGA_RST_L-O", "STBY_POWER_EN-O",
+					"STBY_POWER_PG-I", "PCIE_EP_RST_L-O", "", "",
+		/*N0-N7*/ "", "", "", "", "", "", "", "",
+		/*O0-O7*/ "", "", "", "", "", "", "", "",
+		/*P0-P7*/ "", "", "", "", "", "", "", "",
+		/*Q0-Q7*/ "", "", "", "", "", "", "", "",
+		/*R0-R7*/ "", "", "", "", "", "", "", "",
+		/*S0-S7*/ "", "", "", "", "", "", "", "",
+		/*T0-T7*/ "", "", "", "", "", "", "", "",
+		/*U0-U7*/ "", "", "", "", "", "", "", "",
+		/*V0-V7*/ "AP_EROT_REQ-O", "EROT_AP_GNT-I", "", "","PCB_TEMP_ALERT-I", "","", "",
+		/*W0-W7*/ "", "", "", "", "", "", "", "",
+		/*X0-X7*/ "", "", "TPM_MUX_SEL-O", "", "", "", "", "",
+		/*Y0-Y7*/ "", "", "", "EMMC_RST-O", "","", "", "",
+		/*Z0-Z7*/ "BMC_READY-O","", "", "", "", "", "", "";
+};
+
+&gpio1 {
+	/* 36 1.8V GPIOs */
+	gpio-line-names =
+		/*A0-A7*/ "", "", "", "", "", "", "", "",
+		/*B0-B7*/ "", "", "", "", "", "", "IO_EXPANDER_INT_L-I","",
+		/*C0-C7*/ "", "", "", "", "", "", "", "",
+		/*D0-D7*/ "", "", "", "", "", "", "SPI_HOST_TPM_RST_L-O", "SPI_BMC_FPGA_INT_L-I",
+		/*E0-E7*/ "", "", "", "", "", "", "", "";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts
index c0847636f20b..9f2ad551255d 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts
@@ -52,18 +52,18 @@
 			gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_HIGH>;
 		};
 		bmc_err {
-			lable = "BMC_fault";
+			label = "BMC_fault";
 			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>;
 		};
 
 		sys_err {
-			lable = "Sys_fault";
+			label = "Sys_fault";
 			gpios = <&gpio ASPEED_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
 		};
 	};
 
 	fsi: gpio-fsi {
-		compatible = "fsi-master-gpio", "fsi-master";
+		compatible = "fsi-master-gpio";
 		#address-cells = <2>;
 		#size-cells = <0>;
 
@@ -263,54 +263,50 @@
 	status = "okay";
 };
 
-&pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-};
-
 &gpio {
-	pin_gpio_b0 {
+	pin-gpio-b0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_HDD1_PWR_EN";
 	};
 
-	pin_gpio_b5 {
+	pin-gpio-b5-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "BMC_USB1_OCI2";
 	};
 
-	pin_gpio_h5 {
+	pin-gpio-h5-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_CP0_PERST_ENABLE_R";
 	};
 
-	pin_gpio_z2 {
+	pin-gpio-z2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "RST_PCA9546_U177_N";
 	};
 
-	pin_gpio_aa6 {
+	pin-gpio-aa6-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(AA, 6) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_CP0_RESET_N";
 	};
 
-	pin_gpio_aa7 {
+	pin-gpio-aa7-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(AA, 7) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_TPM_RESET_N";
 	};
 
-	pin_gpio_ab0 {
+	pin-gpio-ab0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(AB, 0) GPIO_ACTIVE_LOW>;
 		output-high;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-mowgli.dts
index 7d38d121ec6d..6c8b966ffccc 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-mowgli.dts
@@ -46,31 +46,31 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		air-water {
+		event-air-water {
 			label = "air-water";
 			gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(F, 6)>;
 		};
 
-		checkstop {
+		event-checkstop {
 			label = "checkstop";
 			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(J, 2)>;
 		};
 
-		ps0-presence {
+		event-ps0-presence {
 			label = "ps0-presence";
 			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(Z, 2)>;
 		};
 
-		ps1-presence {
+		event-ps1-presence {
 			label = "ps1-presence";
 			gpios = <&gpio ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(Z, 0)>;
 		};
 
-		id-button {
+		button-id {
 			label = "id-button";
 			gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(F, 1)>;
@@ -81,31 +81,31 @@
 		compatible = "gpio-keys-polled";
 		poll-interval = <1000>;
 
-		fan0-presence {
+		event-fan0-presence {
 			label = "fan0-presence";
 			gpios = <&pca9552 9 GPIO_ACTIVE_LOW>;
 			linux,code = <9>;
 		};
 
-		fan1-presence {
+		event-fan1-presence {
 			label = "fan1-presence";
 			gpios = <&pca9552 10 GPIO_ACTIVE_LOW>;
 			linux,code = <10>;
 		};
 
-		fan2-presence {
+		event-fan2-presence {
 			label = "fan2-presence";
 			gpios = <&pca9552 11 GPIO_ACTIVE_LOW>;
 			linux,code = <11>;
 		};
 
-		fan3-presence {
+		event-fan3-presence {
 			label = "fan3-presence";
 			gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
 			linux,code = <12>;
 		};
 
-		fan4-presence {
+		event-fan4-presence {
 			label = "fan4-presence";
 			gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
 			linux,code = <13>;
@@ -165,7 +165,7 @@
 	};
 
 	fsi: gpio-fsi {
-		compatible = "fsi-master-gpio", "fsi-master";
+		compatible = "fsi-master-gpio";
 		#address-cells = <2>;
 		#size-cells = <0>;
 		no-gpio-delays;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts
index 3d4bdad27c2d..ce6d30ddf07c 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts
@@ -77,10 +77,9 @@
 	};
 
 	fsi: gpio-fsi {
-		compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master";
+		compatible = "aspeed,ast2500-cf-fsi-master";
 		#address-cells = <2>;
 		#size-cells = <0>;
-		no-gpio-delays;
 
 		memory-region = <&coldfire_memory>;
 		aspeed,sram = <&sram>;
@@ -96,7 +95,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		checkstop {
+		event-checkstop {
 			label = "checkstop";
 			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(J, 2)>;
@@ -248,27 +247,27 @@
 	/*AB0-AB7*/	"","","","","","","","",
 	/*AC0-AC7*/	"","","","","","","","";
 
-	func_mode0 {
+	func-mode0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
 		output-low;
 	};
-	func_mode1 {
+	func-mode1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
 		output-low;
 	};
-	func_mode2 {
+	func-mode2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(D, 5) GPIO_ACTIVE_HIGH>;
 		output-low;
 	};
-	seq_cont {
+	seq-cont-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
 		output-low;
 	};
-	ncsi_cfg {
+	ncsi-cfg-hog {
 		gpio-hog;
 		input;
 		gpios = <ASPEED_GPIO(E, 1) GPIO_ACTIVE_HIGH>;
@@ -284,10 +283,6 @@
 	memory-region = <&gfx_memory>;
 };
 
-&pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-};
-
 &ibt {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-palmetto.dts
index cd660c1ff3f5..7953059a6c67 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-palmetto.dts
@@ -55,7 +55,7 @@
 	};
 
 	fsi: gpio-fsi {
-		compatible = "aspeed,ast2400-cf-fsi-master", "fsi-master";
+		compatible = "aspeed,ast2400-cf-fsi-master";
 		#address-cells = <2>;
 		#size-cells = <0>;
 
@@ -73,7 +73,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		checkstop {
+		event-checkstop {
 			label = "checkstop";
 			gpios = <&gpio ASPEED_GPIO(P, 5) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(P, 5)>;
@@ -151,7 +151,7 @@
 	};
 
 	rtc@68 {
-		compatible = "dallas,ds3231";
+		compatible = "maxim,ds3231";
 		reg = <0x68>;
 	};
 };
@@ -209,140 +209,140 @@
 };
 
 &gpio {
-	pin_func_mode0 {
+	pin-func-mode0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(C, 4) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "func_mode0";
 	};
 
-	pin_func_mode1 {
+	pin-func-mode1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(C, 5)  GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "func_mode1";
 	};
 
-	pin_func_mode2 {
+	pin-func-mode2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "func_mode2";
 	};
 
-	pin_gpio_a0 {
+	pin-gpio-a0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(A, 0) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "BMC_FAN_RESERVED_N";
 	};
 
-	pin_gpio_a1 {
+	pin-gpio-a1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(A, 1) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "APSS_WDT_N";
 	};
 
-	pin_gpio_b1 {
+	pin-gpio-b1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(B, 1) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "APSS_BOOT_MODE";
 	};
 
-	pin_gpio_b2 {
+	pin-gpio-b2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "APSS_RESET_N";
 	};
 
-	pin_gpio_b7 {
+	pin-gpio-b7-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(B, 7) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "SPIVID_STBY_RESET_N";
 	};
 
-	pin_gpio_d1 {
+	pin-gpio-d1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_POWER_UP";
 	};
 
-	pin_gpio_f1 {
+	pin-gpio-f1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 1) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "BMC_BATTERY_TEST";
 	};
 
-	pin_gpio_f4 {
+	pin-gpio-f4-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "AST_HW_FAULT_N";
 	};
 
-	pin_gpio_f5 {
+	pin-gpio-f5-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 5) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "AST_SYS_FAULT_N";
 	};
 
-	pin_gpio_f7 {
+	pin-gpio-f7-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 7) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_FULL_SPEED_N";
 	};
 
-	pin_gpio_g3 {
+	pin-gpio-g3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(G, 3) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_FAN_ERROR_N";
 	};
 
-	pin_gpio_g4 {
+	pin-gpio-g4-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "BMC_WDT_RST1_P";
 	};
 
-	pin_gpio_g5 {
+	pin-gpio-g5-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(G, 5) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "BMC_WDT_RST2_P";
 	};
 
-	pin_gpio_h0 {
+	pin-gpio-h0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "PE_SLOT_TEST_EN_N";
 	};
 
-	pin_gpio_h1 {
+	pin-gpio-h1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "BMC_RTCRST_N";
 	};
 
-	pin_gpio_h2 {
+	pin-gpio-h2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "SYS_PWROK_BMC";
 	};
 
-	pin_gpio_h7 {
+	pin-gpio-h7-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dts
index 084f54866f38..a0263d969e51 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dts
@@ -68,10 +68,9 @@
 	};
 
 	fsi: gpio-fsi {
-		compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master";
+		compatible = "aspeed,ast2500-cf-fsi-master";
 		#address-cells = <2>;
 		#size-cells = <0>;
-		no-gpio-delays;
 
 		memory-region = <&coldfire_memory>;
 		aspeed,sram = <&sram>;
@@ -87,7 +86,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		checkstop {
+		event-checkstop {
 			label = "checkstop";
 			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(J, 2)>;
@@ -263,17 +262,17 @@
 	/*AB0-AB7*/	"","","","","","","","",
 	/*AC0-AC7*/	"","","","","","","","";
 
-	nic_func_mode0 {
+	nic-func-mode0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
 		output-low;
 	};
-	nic_func_mode1 {
+	nic-func-mode1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
 		output-low;
 	};
-	seq_cont {
+	seq-cont-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
 		output-low;
@@ -289,10 +288,6 @@
 	memory-region = <&gfx_memory>;
 };
 
-&pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-};
-
 &pwm_tacho {
 	status = "okay";
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
index e39f310d55eb..6fe7023599e8 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
@@ -50,13 +50,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		ps0-presence {
+		event-ps0-presence {
 			label = "ps0-presence";
 			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(H, 3)>;
 		};
 
-		ps1-presence {
+		event-ps1-presence {
 			label = "ps1-presence";
 			gpios = <&gpio0 ASPEED_GPIO(E, 5) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(E, 5)>;
@@ -65,29 +65,27 @@
 
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <1000>;
 
-		fan0-presence {
+		event-fan0-presence {
 			label = "fan0-presence";
 			gpios = <&pca0 4 GPIO_ACTIVE_LOW>;
 			linux,code = <4>;
 		};
 
-		fan1-presence {
+		event-fan1-presence {
 			label = "fan1-presence";
 			gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
 			linux,code = <5>;
 		};
 
-		fan2-presence {
+		event-fan2-presence {
 			label = "fan2-presence";
 			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
 			linux,code = <6>;
 		};
 
-		fan3-presence {
+		event-fan3-presence {
 			label = "fan3-presence";
 			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
 			linux,code = <7>;
@@ -197,7 +195,6 @@
 
 	fsi-routing-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
 	fsi-mux-gpios = <&gpio0 ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
-	cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
 
 	cfam@0,0 {
 		reg = <0 0>;
@@ -459,7 +456,7 @@
 	status = "okay";
 
 	tpm: tpm@2e {
-		compatible = "tcg,tpm-tis-i2c";
+		compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
 		reg = <0x2e>;
 	};
 };
@@ -484,55 +481,19 @@
 		#size-cells = <0>;
 
 		fan@0 {
-			compatible = "pmbus-fan";
 			reg = <0>;
-			tach-pulses = <2>;
-			maxim,fan-rotor-input = "tach";
-			maxim,fan-pwm-freq = <25000>;
-			maxim,fan-dual-tach;
-			maxim,fan-no-watchdog;
-			maxim,fan-no-fault-ramp;
-			maxim,fan-ramp = <2>;
-			maxim,fan-fault-pin-mon;
 		};
 
 		fan@1 {
-			compatible = "pmbus-fan";
 			reg = <1>;
-			tach-pulses = <2>;
-			maxim,fan-rotor-input = "tach";
-			maxim,fan-pwm-freq = <25000>;
-			maxim,fan-dual-tach;
-			maxim,fan-no-watchdog;
-			maxim,fan-no-fault-ramp;
-			maxim,fan-ramp = <2>;
-			maxim,fan-fault-pin-mon;
 		};
 
 		fan@2 {
-			compatible = "pmbus-fan";
 			reg = <2>;
-			tach-pulses = <2>;
-			maxim,fan-rotor-input = "tach";
-			maxim,fan-pwm-freq = <25000>;
-			maxim,fan-dual-tach;
-			maxim,fan-no-watchdog;
-			maxim,fan-no-fault-ramp;
-			maxim,fan-ramp = <2>;
-			maxim,fan-fault-pin-mon;
 		};
 
 		fan@3 {
-			compatible = "pmbus-fan";
 			reg = <3>;
-			tach-pulses = <2>;
-			maxim,fan-rotor-input = "tach";
-			maxim,fan-pwm-freq = <25000>;
-			maxim,fan-dual-tach;
-			maxim,fan-no-watchdog;
-			maxim,fan-no-fault-ramp;
-			maxim,fan-ramp = <2>;
-			maxim,fan-fault-pin-mon;
 		};
 	};
 
@@ -873,7 +834,13 @@
 		    <&pinctrl_lsirq_default>;
 };
 
-&xdma {
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
 	status = "okay";
-	memory-region = <&vga_memory>;
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 };
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-vesnin.dts
index 328ef472c479..8a7fb55ab489 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-vesnin.dts
@@ -63,13 +63,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		button_checkstop {
+		event-checkstop {
 			label = "checkstop";
 			linux,code = <74>;
 			gpios = <&gpio ASPEED_GPIO(P, 5) GPIO_ACTIVE_LOW>;
 		};
 
-		button_identify {
+		event-identify {
 			label = "identify";
 			linux,code = <152>;
 			gpios = <&gpio ASPEED_GPIO(O, 7) GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dts
index 230f3584bcab..89907b628b65 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dts
@@ -51,25 +51,25 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		air-water {
+		event-air-water {
 			label = "air-water";
 			gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(B, 5)>;
 		};
 
-		checkstop {
+		event-checkstop {
 			label = "checkstop";
 			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(J, 2)>;
 		};
 
-		ps0-presence {
+		event-ps0-presence {
 			label = "ps0-presence";
 			gpios = <&gpio ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(P, 7)>;
 		};
 
-		ps1-presence {
+		event-ps1-presence {
 			label = "ps1-presence";
 			gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(N, 0)>;
@@ -85,25 +85,25 @@
 		compatible = "gpio-keys-polled";
 		poll-interval = <1000>;
 
-		fan0-presence {
+		event-fan0-presence {
 			label = "fan0-presence";
 			gpios = <&pca0 4 GPIO_ACTIVE_LOW>;
 			linux,code = <4>;
 		};
 
-		fan1-presence {
+		event-fan1-presence {
 			label = "fan1-presence";
 			gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
 			linux,code = <5>;
 		};
 
-		fan2-presence {
+		event-fan2-presence {
 			label = "fan2-presence";
 			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
 			linux,code = <6>;
 		};
 
-		fan3-presence {
+		event-fan3-presence {
 			label = "fan3-presence";
 			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
 			linux,code = <7>;
@@ -173,7 +173,7 @@
 	};
 
 	fsi: gpio-fsi {
-		compatible = "fsi-master-gpio", "fsi-master";
+		compatible = "fsi-master-gpio";
 		#address-cells = <2>;
 		#size-cells = <0>;
 		no-gpio-delays;
@@ -661,10 +661,6 @@
 	memory-region = <&gfx_memory>;
 };
 
-&pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-};
-
 &wdt1 {
 	aspeed,reset-type = "none";
 	aspeed,external-signal;
@@ -696,9 +692,4 @@
 	memory-region = <&video_engine_memory>;
 };
 
-&xdma {
-	status = "okay";
-	memory-region = <&vga_memory>;
-};
-
 #include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts
index 7ae4ea0d2931..af3a9d39d277 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts
@@ -58,13 +58,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		checkstop {
+		event-checkstop {
 			label = "checkstop";
 			gpios = <&gpio ASPEED_GPIO(F, 7) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(F, 7)>;
 		};
 
-		pcie-e2b-present{
+		event-pcie-e2b-present {
 			label = "pcie-e2b-present";
 			gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(E, 7)>;
@@ -96,7 +96,7 @@
 	};
 
 	fsi: gpio-fsi {
-		compatible = "fsi-master-gpio", "fsi-master";
+		compatible = "fsi-master-gpio";
 		#address-cells = <2>;
 		#size-cells = <0>;
 		no-gpio-delays;
@@ -231,7 +231,7 @@
 &i2c1 {
 	status = "okay";
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9546";
 		reg = <0x71>;
 		#address-cells = <1>;
@@ -282,7 +282,7 @@
 &i2c4 {
 	status = "okay";
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9546";
 		reg = <0x71>;
 		#address-cells = <1>;
@@ -466,8 +466,6 @@
 };
 
 &pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-
 	pinctrl_gpioh_unbiased: gpioi_unbiased {
 		pins = "A8", "C7", "B7", "A7", "D7", "B6", "A6", "E7";
 		bias-disable;
@@ -511,25 +509,25 @@
 	/*AB0-AB7*/	"","","","","","","","",
 	/*AC0-AC7*/	"","","","","","","","";
 
-	line_iso_u146_en {
+	line-iso-u146-en-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(O, 4) GPIO_ACTIVE_HIGH>;
 		output-high;
 	};
 
-	ncsi_mux_en_n {
+	ncsi-mux-en-n-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
 		output-low;
 	};
 
-	line_bmc_i2c2_sw_rst_n {
+	line-bmc-i2c2-sw-rst-n-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>;
 		output-high;
 	};
 
-	line_bmc_i2c5_sw_rst_n {
+	line-bmc-i2c5-sw-rst-n-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-portwell-neptune.dts
index 61bc74b423cf..a5e64ccc2b3a 100644
--- a/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-portwell-neptune.dts
@@ -24,17 +24,17 @@
 	leds {
 		compatible = "gpio-leds";
 		postcode0 {
-			label="BMC_UP";
+			label = "BMC_UP";
 			gpios = <&gpio ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 		postcode1 {
-			label="BMC_HB";
+			label = "BMC_HB";
 			gpios = <&gpio ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 		postcode2 {
-			label="FAULT";
+			label = "FAULT";
 			gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
 		};
 		// postcode3-7 are GPIOH3-H7
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-qcom-dc-scm-v1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-qcom-dc-scm-v1.dts
new file mode 100644
index 000000000000..259ef3f54c5c
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-qcom-dc-scm-v1.dts
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved.
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+
+/ {
+	model = "Qualcomm DC-SCM V1 BMC";
+	compatible = "qcom,dc-scm-v1-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&mdio3 {
+	status = "okay";
+
+	ethphy3: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mac2 {
+	status = "okay";
+
+	/* Bootloader sets up the MAC to insert delay */
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy3>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii3_default>;
+};
+
+&mac3 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+
+	use-ncsi;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <133000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <133000000>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bios";
+		spi-max-frequency = <133000000>;
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"BMC_FLASH_MUX_SEL","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"BMC_FWSPI_RST_N","","GPIO_1_BMC_3V3","","","","","",
+	/*O0-O7*/	"JTAG_MUX_A","JTAG_MUX_B","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","SCMFPGA_SPARE_GPIO1_3V3",
+			"SCMFPGA_SPARE_GPIO2_3V3","SCMFPGA_SPARE_GPIO3_3V3",
+			"SCMFPGA_SPARE_GPIO4_3V3","SCMFPGA_SPARE_GPIO5_3V3",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"","","","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*A0-A7*/	"GPI_1_BMC_1V8","","","","","",
+			"SCMFPGA_SPARE_GPIO1_1V8","SCMFPGA_SPARE_GPIO2_1V8",
+	/*B0-B7*/	"SCMFPGA_SPARE_GPIO3_1V8","SCMFPGA_SPARE_GPIO4_1V8",
+			"SCMFPGA_SPARE_GPIO5_1V8","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","BMC_SPI1_RST_N","BIOS_FLASH_MUX_SEL","",
+			"","TPM2_PIRQ_N","TPM2_RST_N","",
+	/*E0-E7*/	"","","","","","","","";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&i2c14 {
+	status = "okay";
+};
+
+&i2c15 {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-q71l.dts
index 9605e53f5bbf..fed2791f5994 100644
--- a/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-q71l.dts
@@ -197,7 +197,7 @@
 	 *    Slot 6,
 	 *    Slot 7
 	 */
-	i2c-switch@74 {
+	i2c-mux@74 {
 		compatible = "nxp,pca9546";
 		reg = <0x74>;
 		#address-cells = <1>;
@@ -238,7 +238,7 @@
 	 *    SSD 1,
 	 *    SSD 2
 	 */
-	i2c-switch@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -325,7 +325,7 @@
 	 *    PSU3
 	 *    PSU2
 	 */
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts
new file mode 100644
index 000000000000..86451227847b
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts
@@ -0,0 +1,610 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2022 Quanta Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Quanta S6Q BMC";
+	compatible = "quanta,s6q-bmc", "aspeed,ast2600";
+
+	aliases {
+		// bus 0
+		i2c20 = &SMB_HOST_DB2000_3V3AUX_SCL;
+		i2c21 = &U12_PCA9546_CH1;
+		i2c22 = &SMB_HOST_DB800_B_SCL;
+		i2c23 = &SMB_HOST_DB800_C_SCL;
+
+		// bus 1
+		i2c24 = &SMB_M2_P0_1V8AUX_SCL;
+		i2c25 = &SMB_M2_P1_1V8AUX_SCL;
+		i2c26 = &SMB_CPU_PIROM_3V3AUX_SCL;
+		i2c27 = &SMB_TEMP_3V3AUX_SCL;
+		i2c28 = &SMB_IPMB_3V3AUX_SSDSB_SCL;
+		i2c29 = &SMB_IPMB_3V3AUX_SCL;
+		i2c31 = &SMB_FB_SCL;
+
+		// bus 1 - Fan board
+		i2c32 = &SMB_IOEXP_SCL;
+		i2c33 = &SMB_PROGRAM_SCL;
+		i2c34 = &SMB_FB_SCL_CH2;
+		i2c35 = &SMB_FAN_SENSE_SCL;
+
+		// bus 6
+		i2c36 = &U197_PCA9546_CH0;
+		i2c37 = &U197_PCA9546_CH1;
+		i2c38 = &U197_PCA9546_CH2;
+		i2c39 = &U197_PCA9546_CH3;
+
+		//bus 7
+		i2c40 = &SMB_OCP_SFF_3V3AUX_SCL; //OCP1
+		i2c41 = &SMB_OCP_LFF_3V3AUX_SCL; //OCP2
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			<&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+			<&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		BMC_HEARTBEAT_N {
+			label = "BMC_HEARTBEAT_N";
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		BMC_LED_STATUS_AMBER_N {
+			label = "BMC_LED_STATUS_AMBER_N";
+			gpios = <&gpio0 ASPEED_GPIO(S, 6) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		FM_ID_LED_N {
+			label = "FM_ID_LED_N";
+			gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0 - A7*/	"", "", "", "", "", "", "", "",
+	/*B0 - B7*/	"", "", "", "", "", "", "", "",
+	/*C0 - C7*/	"", "", "", "", "", "", "", "",
+	/*D0 - D7*/	"", "", "", "", "", "", "", "",
+	/*E0 - E7*/	"", "", "", "", "", "", "", "",
+	/*F0 - F7*/	"PLTRST_N", "", "PWR_DEBUG_N", "", "", "", "", "",
+	/*G0 - G7*/	"", "", "", "", "", "", "", "",
+	/*H0 - H7*/	"", "", "", "", "", "", "", "",
+	/*I0 - I7*/	"", "", "", "", "", "", "", "",
+	/*J0 - J7*/	"", "", "", "", "", "", "", "",
+	/*K0 - K7*/	"", "", "", "", "", "", "", "",
+	/*L0 - L7*/	"", "", "", "", "PREQ_N", "TCK_MUX_SEL", "", "",
+	/*M0 - M7*/	"", "", "", "PWRGD_SYS_PWROK", "", "PRDY_N", "", "",
+	/*N0 - N7*/	"", "", "", "", "", "", "", "",
+	/*O0 - O7*/	"", "", "", "", "", "", "", "",
+	/*P0 - P7*/	"SYS_BMC_PWRBTN_R_N", "SYS_PWRBTN_N", "FM_MB_RST_BTN", "RST_BMC_RSTBTN_OUT_N", "", "", "", "",
+	/*Q0 - Q7*/	"", "", "", "", "", "", "", "",
+	/*R0 - R7*/	"", "", "", "", "", "", "", "",
+	/*S0 - S7*/	"", "", "", "FP_ID_BTN_SCM_N", "", "", "", "",
+	/*T0 - T7*/	"", "", "", "", "", "", "", "",
+	/*U0 - U7*/	"", "", "", "", "", "", "", "",
+	/*V0 - V7*/	"", "", "", "", "", "SMI", "", "",
+	/*W0 - W7*/	"", "", "", "", "", "", "", "",
+	/*X0 - X7*/	"", "", "", "", "", "", "", "",
+	/*Y0 - Y7*/	"", "", "", "", "", "", "", "",
+	/*Z0 - Z7*/	"FM_BMC_READY_N", "", "", "", "", "", "", "",
+	/*AA0 - AA7*/	"", "", "", "", "", "", "", "",
+	/*AB0 - AB7*/	"", "", "", "", "", "", "", "",
+	/*AC0 - AC7*/	"", "", "", "", "", "", "", "";
+};
+
+&sgpiom0 {
+	status = "okay";
+	ngpios = <128>;
+	bus-frequency = <48000>;
+	gpio-line-names =
+	/* SGPIO input lines */
+	/*IOA0-IOA7*/	"","", "SIO_POWER_GOOD","OA1", "XDP_PRST_N","", "","", "FM_SLPS3_PLD_N","", "FM_SLPS4_PLD_N","", "FM_BIOS_POST_CMPLT_BMC_N","", "FM_ADR_TRIGGER_N","OA7",
+	/*IOB0-IOB7*/	"FM_ADR_COMPLETE","", "FM_PMBUS_ALERT_B_EN","", "PSU0_PRESENT_N","", "PSU1_PRESENT_N","", "PSU0_VIN_BUF_GOOD","", "PSU01_VIN_BUF_GOOD","", "PWRGD_PS0_PWROK_R","", "PWRGD_PS1_PWROK_R","",
+	/*IOC0-IOC7*/	"PWRGD_PS_PWROK_PLD_R","", "CHASSIS_INTRUSION","", "BMC_MFG_MODE","", "FM_BMC_EN_DET_R","", "FM_ME_BT_DONE","", "CPU1_PRESENCE","", "CPU2_PRESENCE","", "IRQ_PSYS_CRIT_N","",
+	/*IOD0-IOD7*/	"","", "CPU1_THERMTRIP","", "CPU2_THERMTRIP","", "CPU1_MEM_THERM_EVENT","", "CPU2_MEM_THERM_EVENT","", "CPU1_VRHOT","", "CPU2_VRHOT","", "","",
+	/*IOE0-IOE7*/	"","", "CPU1_MEM_VRHOT","", "CPU2_MEM_VRHOT","", "","", "PCH_BMC_THERMTRIP","", "","", "","", "","",
+	/*IOF0-IOF7*/	"CPU_ERR0","", "CPU_ERR1","", "CPU_ERR2","", "","", "","", "CPU_CATERR","", "","", "","",
+	/*IOG0-IOG7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*IOH0-IOH7*/	"","", "FP_ID_BTN_R1_N","", "FP_RST_BTN_N","", "","", "","", "FP_PWR_BTN_PLD_N_R","", "","", "","",
+	/*IOI0-IOI7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*IOJ0-IOJ7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*IOK0-IOK7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*IOL0-IOL7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*IOM0-IOM7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*ION0-ION7*/	"","BMC_SW_HEARTBEAT_N_R", "","FP_LED_FAULT_N", "","FP_ID_LED_N", "","FM_BMC_RSTBTN_OUT_N", "","FM_THERMTRIP_DLY_LVC1_R_N", "","", "","RST_PCA9548_SENSOR_PLD_N", "","USB_OC1_REAR_N",
+	/*IOO0-IOO7*/	"","IRQ_TPM_SPI_N", "","", "","IRQ_PCH_SCI_WHEA_R_N", "","IRQ_BMC_PCH_NMI_R", "","H_CPU_NMI_LVC1_R_N", "","", "","", "","FM_JTAG_BMC_PLD_MUX_SEL",
+	/*IOP0-IOP7*/	"IP0","OP0", "","", "","", "","", "","", "","", "","", "IP7","OP7";
+};
+
+&adc0 {
+	vref = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	vref = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&mdio2 {
+	status = "okay";
+
+	ethphy2: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mac2 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy2>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii3_default>;
+};
+
+&mac3 {
+	status = "okay";
+
+	phy-mode = "rmii";
+	use-ncsi;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2_default &pinctrl_spi2cs1_default
+		&pinctrl_spi2cs2_default>;
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "spi2:0";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&kcs1 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xCA0>;
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xCA8>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xCA2>;
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	non-removable;
+	bus-width = <4>;
+	max-frequency = <100000000>;
+};
+
+&vhub {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	U34_PWR_ADC@48 {
+		compatible = "ti,ads7830";
+		reg = <0x48>;
+	};
+
+	U35_PWR_ADC@4b {
+		compatible = "ti,ads7830";
+		reg = <0x4b>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		SMB_HOST_DB2000_3V3AUX_SCL: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		U12_PCA9546_CH1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		SMB_HOST_DB800_B_SCL: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		SMB_HOST_DB800_C_SCL: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	i2c-mux@59 {
+		compatible = "nxp,pca9848";
+		reg = <0x59>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		SMB_M2_P0_1V8AUX_SCL: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		SMB_M2_P1_1V8AUX_SCL: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		SMB_CPU_PIROM_3V3AUX_SCL: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		SMB_TEMP_3V3AUX_SCL: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			U163_tmp75@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+			U114_tmp75@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+		};
+
+		SMB_IPMB_3V3AUX_SSDSB_SCL: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			U4_tmp75@4c {
+				compatible = "ti,tmp75";
+				reg = <0x4c>;
+			};
+			U73_tmp75@4d {
+				compatible = "ti,tmp75";
+				reg = <0x4d>;
+			};
+		};
+
+		SMB_IPMB_3V3AUX_SCL: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+				pagesize = <32>;
+			};
+		};
+
+		SMB_FB_SCL: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			i2c-mux@77 {
+				compatible = "nxp,pca9546";
+				reg = <0x77>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				SMB_IOEXP_SCL: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				SMB_PROGRAM_SCL: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				SMB_FB_SCL_CH2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				SMB_FAN_SENSE_SCL: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+
+					Current_Meter_U2@45 {
+						compatible = "ti,ina219";
+						reg = <0x45>;
+						shunt-resistor = <1000>; /* = 1 mOhm */
+					};
+
+					Current_Meter_U3@44 {
+						compatible = "ti,ina219";
+						reg = <0x44>;
+						shunt-resistor = <1000>; /* = 1 mOhm */
+					};
+
+					TEMP_sensor_U2@4b {
+						compatible = "ti,tmp75";
+						reg = <0x4b>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	bus-frequency = <400000>;
+
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	/* MB FRU (U173) @ 0xA2 */
+	mb_fru: eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	/* FP_U1 Inlet */
+	FP_U1_tmp75@4a {
+		compatible = "ti,tmp75";
+		reg = <0x4a>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+
+		U197_PCA9546_CH0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		U197_PCA9546_CH1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			cpu0_pvccin@60 {
+				compatible = "renesas,raa229004";
+				reg = <0x60>;
+			};
+
+			cpu0_pvccinfaon@61 {
+				compatible = "isil,isl69260";
+				reg = <0x61>;
+			};
+
+			cpu0_pvccd_hv@63 {
+				compatible = "isil,isl69260";
+				reg = <0x63>;
+			};
+		};
+
+		U197_PCA9546_CH2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			cpu1_pvccin@72 {
+				compatible = "renesas,raa229004";
+				reg = <0x72>;
+			};
+
+			cpu1_pvccinfaon@74 {
+				compatible = "isil,isl69260";
+				reg = <0x74>;
+			};
+
+			cpu1_pvccd_hv@76 {
+				compatible = "isil,isl69260";
+				reg = <0x76>;
+			};
+		};
+
+		U197_PCA9546_CH3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+
+		SMB_OCP_SFF_3V3AUX_SCL: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		SMB_OCP_LFF_3V3AUX_SCL: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c14 {
+	status = "okay";
+
+	/* SCM FRU (U19) @ 0xA2 */
+	scm_fru: eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	scm_tmp75_u4@4a {
+		compatible = "ti,tmp75";
+		reg = <0x4a>;
+	};
+};
+
+&i2c15 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-supermicro-x11spi.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-supermicro-x11spi.dts
index 50f3c6a5c0c8..b961dff388d1 100644
--- a/arch/arm/boot/dts/aspeed-bmc-supermicro-x11spi.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-supermicro-x11spi.dts
@@ -123,10 +123,6 @@
 	status = "okay";
 };
 
-&pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-};
-
 &pwm_tacho {
 	status = "okay";
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-tyan-s7106.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-tyan-s7106.dts
new file mode 100644
index 000000000000..aff27c1d4b06
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-tyan-s7106.dts
@@ -0,0 +1,528 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Tyan S7106 BMC";
+	compatible = "tyan,s7106-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		p2a_memory: region@987f0000 {
+			no-map;
+			reg = <0x987f0000 0x00010000>; /* 64KB */
+		};
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>; /* 16M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		label = "bmc";
+		status = "okay";
+		m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+	};
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default>;
+};
+
+&uart2 {
+	/* RS-232 connector on header */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+			&pinctrl_rxd2_default>;
+};
+
+&uart3 {
+	/* Alternative to vuart to internally connect (route) to uart1
+	 * when vuart cannot be used due to BIOS limitations.
+	 */
+	status = "okay";
+};
+
+&uart4 {
+	/* Alternative to vuart to internally connect (route) to the
+	 * external port usually used by uart1 when vuart cannot be
+	 * used due to BIOS limitations.
+	 */
+	status = "okay";
+};
+
+&uart5 {
+	/* BMC "debug" (console) UART; connected to RS-232 connector
+	 * on header; selectable via jumpers as alternative to uart2
+	 */
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+
+	/* We enable the VUART here, but leave it in a state that does
+	 * not interfere with the SuperIO. The goal is to have both the
+	 * VUART and the SuperIO available and decide at runtime whether
+	 * the VUART should actually be used. For that reason, configure
+	 * an "invalid" IO address and an IRQ that is not used by the
+	 * BMC.
+	 */
+
+	aspeed,lpc-io-reg = <0xffff>;
+	aspeed,lpc-interrupts = <15 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&p2a {
+	status = "okay";
+	memory-region = <&p2a_memory>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&adc {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+			&pinctrl_pwm1_default
+			&pinctrl_pwm3_default
+			&pinctrl_pwm4_default>;
+
+	/* CPU fan #0 */
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	/* CPU fan #1 */
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	/* PWM group for chassis fans #1, #2, #3 and #4  */
+	fan@2 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	/* PWM group for chassis fans #5 and #6  */
+	fan@6 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	/* Hardware monitor with temperature sensors */
+	nct7802@28 {
+		compatible = "nuvoton,nct7802";
+		reg = <0x28>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@0 { /* LTD */
+			reg = <0>;
+		};
+
+		channel@1 { /* RTD1 */
+			reg = <1>;
+			sensor-type = "temperature";
+			temperature-mode = "thermistor";
+		};
+
+		channel@2 { /* RTD2 */
+			reg = <2>;
+			sensor-type = "temperature";
+			temperature-mode = "thermistor";
+		};
+
+		channel@3 { /* RTD3 */
+			reg = <3>;
+			sensor-type = "temperature";
+		};
+	};
+
+	/* Also connected to:
+	 * - IPMB pin header
+	 * - CPU #0 memory error LED @ 0x3A
+	 * - CPU #1 memory error LED @ 0x3C
+	 */
+};
+
+&i2c1 {
+	/* Directly connected to PCH SMBUS #0 */
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* BMC EEPROM, incl. mainboard FRU */
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+	};
+
+	/* Also connected to:
+	 * - fan header
+	 * - mini-SAS HD connector
+	 * - SSATA SGPIO
+	 * - via switch (BMC_SMB3_PCH_IE_SML3_EN, active low)
+	 *   to PCH SMBUS #3
+	 */
+};
+
+&i2c3 {
+	status = "okay";
+
+	/* PSU1 FRU @ 0xA0 */
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+	};
+
+	/* PSU2 FRU @ 0xA2 */
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+	};
+
+	/* PSU1 @ 0xB0 */
+	power-supply@58 {
+		compatible = "pmbus";
+		reg = <0x58>;
+	};
+
+	/* PSU2 @ 0xB2 */
+	power-supply@59 {
+		compatible = "pmbus";
+		reg = <0x59>;
+	};
+
+	/* Also connected to:
+	 * - PCH SMBUS #1
+	 */
+};
+
+&i2c4 {
+	status = "okay";
+
+	/* Connected to:
+	 * - PCH SMBUS #2
+	 */
+
+	/* Connected via switch to:
+	 * - CPU #0 channels ABC VDDQ @ 0x80
+	 * - CPU #0 channels DEF VDDQ @ 0x81
+	 * - CPU #1 channels ABC VDDQ @ 0x82
+	 * - CPU #1 channels DEF VDDQ @ 0x83
+	 * - CPU #0 VCCIO & VMCP @ 0x52
+	 * - CPU #1 VCCIO & VMCP @ 0x53
+	 * - CPU #0 VCCIN @ 0xC0
+	 * - CPU #0 VSA @ 0xC2
+	 * - CPU #1 VCCIN @ 0xC4
+	 * - CPU #1 VSA @ 0xC6
+	 * - J110
+	 */
+};
+
+&i2c5 {
+	status = "okay";
+
+	/* Connected via switch (PCH_BMC_SMB_SW_P) to:
+	 * - mainboard FRU @ 0xAE
+	 * - XDP connector
+	 * - ME debug header
+	 * - clock buffer @ 0xD8
+	 * - i2c4 via switch (PCH_VR_SMBUS_SW_P; controlled by PCH)
+	 * - PCH SMBUS
+	 */
+};
+
+&i2c6 {
+	status = "okay";
+
+	/* Connected via switch (BMC_PE_SMB_EN_1_N) to
+	 * bus mux (selector BMC_PE_SMB_SW_BIT[1..0]) to:
+	 * - 0,0: PCIE slot 1, SMB #1
+	 * - 0,1: PCIE slot 1, SMB #2
+	 * - 1,0: PCIE slot 2, SMB #1
+	 * - 1,1: PCIE slot 2, SMB #2
+	 */
+
+	/* Connected via switch (BMC_PE_SMB_EN_2_N) to
+	 * bus mux (selector BMC_PE_SMB_SW_BIT[1..0]) to:
+	 * - 0,0: OCP0 (A) SMB
+	 * - 0,1: OCP0 (C) SMB
+	 * - 1,0: OCP1 (A) SMB
+	 * - 1,1: NC
+	 */
+};
+
+&i2c7 {
+	status = "okay";
+
+	/* Connected to:
+	 * - PCH SMBUS #4
+	 */
+};
+
+&i2c8 {
+	status = "okay";
+
+	/* Not connected */
+};
+
+&mac0 {
+	status = "okay";
+	use-ncsi;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&kcs1 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+/* Enable BMC VGA output to show an early (pre-BIOS) boot screen */
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+/* We're following the GPIO naming as defined at
+ * https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md.
+ *
+ * Notes on led-identify and id-button:
+ * - A physical button is connected to id-button which
+ *   triggers the clock on a D flip-flop. The /Q output of the
+ *   flip-flop drives its D input.
+ * - The flip-flop's Q output drives led-identify which is
+ *   connected to LEDs.
+ * - With that, every button press toggles the LED between on and off.
+ *
+ * Notes on power-, reset- and nmi- button and control:
+ * - The -button signals can be used to monitor physical buttons.
+ * - The -control signals can be used to actuate the specific
+ *   operation.
+ * - In hardware, the -button signals are connected to the -control
+ *   signals through drivers with the -control signals being
+ *   protected through diodes.
+ */
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0*/		"",
+	/*A1*/		"",
+	/*A2*/		"led-identify", /* in/out: BMC_IDLED_ON_N */
+	/*A3*/		"",
+	/*A4*/		"",
+	/*A5*/		"",
+	/*A6*/		"",
+	/*A7*/		"",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0*/		"",
+	/*C1*/		"",
+	/*C2*/		"",
+	/*C3*/		"",
+	/*C4*/		"id-button", /* in/out: BMC_IDBTN_IN_OUT_N */
+	/*C5*/		"post-complete", /* in: FM_BIOS_POST_CMPLT_N */
+	/*C6*/		"",
+	/*C7*/		"",
+	/*D0*/		"",
+	/*D1*/		"",
+	/*D2*/		"power-chassis-good", /* in: SYS_PWROK_BUF */
+	/*D3*/		"platform-reset", /* in: SYS_PLTRST_N */
+	/*D4*/		"",
+	/*D5*/		"",
+	/*D6*/		"",
+	/*D7*/		"",
+	/*E0*/		"power-button", /* in: BMC_PWBTN_IN_N */
+	/*E1*/		"power-chassis-control", /* out: BMC_PWRBTN_OUT_N */
+	/*E2*/		"reset-button", /* in: BMC_RSTBTN_IN_N */
+	/*E3*/		"reset-control", /* out: BMC_RSTBTN_OUT_N */
+	/*E4*/		"nmi-button", /* in: BMC_NMIBTN_IN_N */
+	/*E5*/		"nmi-control", /* out: BMC_NMIBTN_OUT_N */
+	/*E6*/		"",
+	/*E7*/		"led-heartbeat", /* out: BMC_HEARTBRAT_LED_N */
+	/*F0*/		"",
+	/*F1*/		"clear-cmos-control", /* out: BMC_CLR_CMOS_N */
+	/*F2*/		"",
+	/*F3*/		"",
+	/*F4*/		"led-fault", /* out: AST_HW_FAULT_N */
+	/*F5*/		"",
+	/*F6*/		"",
+	/*F7*/		"",
+	/*G0*/		"BMC_PE_SMB_EN_1_N", /* out */
+	/*G1*/		"BMC_PE_SMB_EN_2_N", /* out */
+	/*G2*/		"",
+	/*G3*/		"",
+	/*G4*/		"",
+	/*G5*/		"",
+	/*G6*/		"",
+	/*G7*/		"",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0*/		"",
+	/*Q1*/		"",
+	/*Q2*/		"",
+	/*Q3*/		"",
+	/*Q4*/		"BMC_PE_SMB_SW_BIT0", /* out */
+	/*Q5*/		"BMC_PE_SMB_SW_BIT1", /* out */
+	/*Q6*/		"",
+	/*Q7*/		"",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0*/		"",
+	/*AA1*/		"",
+	/*AA2*/		"",
+	/*AA3*/		"BMC_SMB3_PCH_IE_SML3_EN", /* out */
+	/*AA4*/		"",
+	/*AA5*/		"",
+	/*AA6*/		"",
+	/*AA7*/		"",
+	/*AB0-AB7*/	"","","","","","","","";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-tyan-s8036.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-tyan-s8036.dts
new file mode 100644
index 000000000000..f6c4549c0ac4
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-tyan-s8036.dts
@@ -0,0 +1,471 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Tyan S8036 BMC";
+	compatible = "tyan,s8036-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		p2a_memory: region@987f0000 {
+			no-map;
+			reg = <0x987f0000 0x00010000>; /* 64KB */
+		};
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>; /* 16M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		label = "bmc";
+		status = "okay";
+		m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+	};
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default>;
+};
+
+&uart2 {
+	/* RS-232 connector on header */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+			&pinctrl_rxd2_default>;
+};
+
+&uart3 {
+	/* Alternative to vuart to internally connect (route) to uart1
+	 * when vuart cannot be used due to BIOS limitations.
+	 */
+	status = "okay";
+};
+
+&uart4 {
+	/* Alternative to vuart to internally connect (route) to the
+	 * external port usually used by uart1 when vuart cannot be
+	 * used due to BIOS limitations.
+	 */
+	status = "okay";
+};
+
+&uart5 {
+	/* BMC "debug" (console) UART; connected to RS-232 connector
+	 * on header; selectable via jumpers as alternative to uart2
+	 */
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+
+	/* We enable the VUART here, but leave it in a state that does
+	 * not interfere with the SuperIO. The goal is to have both the
+	 * VUART and the SuperIO available and decide at runtime whether
+	 * the VUART should actually be used. For that reason, configure
+	 * an "invalid" IO address and an IRQ that is not used by the
+	 * BMC.
+	 */
+	aspeed,lpc-io-reg = <0xffff>;
+	aspeed,lpc-interrupts = <15 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&p2a {
+	status = "okay";
+	memory-region = <&p2a_memory>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&adc {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+			&pinctrl_pwm1_default
+			&pinctrl_pwm3_default
+			&pinctrl_pwm4_default>;
+
+	/* CPU fan */
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	/* PWM group for chassis fans #1, #2, #3 and #4 */
+	fan@2 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	/* PWM group for chassis fans #5 and #6  */
+	fan@6 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+};
+
+&i2c0 {
+	/* Directly connected to Sideband-Temperature Sensor Interface (APML) */
+	status = "okay";
+};
+
+&i2c1 {
+	/* Directly connected to IPMB HDR. */
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* BMC EEPROM, incl. mainboard FRU */
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+	};
+	/* Also connected to:
+	 * - BCM5720
+	 * - FPGA
+	 * - FAN HDR
+	 * - FPIO HDR
+	 */
+};
+
+&i2c3 {
+	status = "okay";
+
+	/* PSU1 FRU @ 0xA0 */
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+	};
+
+	/* PSU2 FRU @ 0xA2 */
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+	};
+
+	/* PSU1 @ 0xB0 */
+	power-supply@58 {
+		compatible = "pmbus";
+		reg = <0x58>;
+	};
+
+	/* PSU2 @ 0xB2 */
+	power-supply@59 {
+		compatible = "pmbus";
+		reg = <0x59>;
+	};
+
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+	/* Hardware monitor with temperature sensors */
+	nct7802@28 {
+		compatible = "nuvoton,nct7802";
+		reg = <0x28>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@0 { /* LTD */
+			reg = <0>;
+			status = "okay";
+		};
+
+		channel@1 { /* RTD1 */
+			reg = <1>;
+			status = "okay";
+			sensor-type = "temperature";
+			temperature-mode = "thermistor";
+		};
+
+		channel@2 { /* RTD2 */
+			reg = <2>;
+			status = "okay";
+			sensor-type = "temperature";
+			temperature-mode = "thermistor";
+		};
+
+		channel@3 { /* RTD3 */
+			reg = <3>;
+			status = "okay";
+			sensor-type = "temperature";
+		};
+	};
+
+	/* Also connected to:
+	 * - PCA9544
+	 * - CLK BUFF
+	 * - OCP FRU
+	 */
+};
+
+&i2c6 {
+	status = "okay";
+	/* Connected to:
+	 * - PCA9548 @0xE0
+	 * - PCA9548 @0xE2
+	 * - PCA9544 @0xE4
+	 */
+};
+
+&i2c7 {
+	status = "okay";
+
+	/* Connected to:
+	 * - PCH SMBUS #4
+	 */
+};
+
+&i2c8 {
+	status = "okay";
+
+	/* Not connected */
+};
+
+&mac0 {
+	status = "okay";
+	use-ncsi;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&kcs1 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+/* Enable BMC VGA output to show an early (pre-BIOS) boot screen */
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+/* We're following the GPIO naming as defined at
+ * https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md.
+ *
+ * Notes on led-identify and id-button:
+ * - A physical button is connected to id-button which
+ *   triggers the clock on a D flip-flop. The /Q output of the
+ *   flip-flop drives its D input.
+ * - The flip-flop's Q output drives led-identify which is
+ *   connected to LEDs.
+ * - With that, every button press toggles the LED between on and off.
+ *
+ * Notes on power-, reset- and nmi- button and control:
+ * - The -button signals can be used to monitor physical buttons.
+ * - The -control signals can be used to actuate the specific
+ *   operation.
+ * - In hardware, the -button signals are connected to the -control
+ *   signals through drivers with the -control signals being
+ *   protected through diodes.
+ */
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0*/		"",
+	/*A1*/		"",
+	/*A2*/		"led-identify", /* in/out: BMC_CHASSIS_ID_LED_L */
+	/*A3*/		"",
+	/*A4*/		"",
+	/*A5*/		"",
+	/*A6*/		"",
+	/*A7*/		"",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0*/		"",
+	/*D1*/		"",
+	/*D2*/		"power-chassis-good", /* in: PWR_GOOD_LED -- Check if this is Z3?*/
+	/*D3*/		"platform-reset", /* in: RESET_LED_L */
+	/*D4*/		"",
+	/*D5*/		"",
+	/*D6*/		"",
+	/*D7*/		"",
+	/*E0*/		"power-button", /* in: BMC_SYS_MON_PWR_BTN_L */
+	/*E1*/		"power-chassis-control", /* out: BMC_ASSERT_PWR_BTN */
+	/*E2*/		"reset-button", /* in: BMC_SYS_MOS_RST_BTN_L*/
+	/*E3*/		"reset-control", /* out: BMC_ASSERT_RST_BTN */
+	/*E4*/		"nmi-button", /* in: BMC_SYS_MON_NMI_BTN_L */
+	/*E5*/		"nmi-control", /* out: BMC_ASSERT_NMI_BTN */
+	/*E6*/		"TSI_RESERT",
+	/*E7*/		"led-heartbeat", /* out: BMC_GPIOE7 */
+	/*F0*/		"",
+	/*F1*/		"clear-cmos-control", /* out: BMC_ASSERT_CLR_CMOS_L */
+	/*F2*/		"",
+	/*F3*/		"",
+	/*F4*/		"led-fault", /* out: BMC_HWM_FAULT_LED_L */
+	/*F5*/		"BMC_SYS_FAULT_LED_L",
+	/*F6*/		"BMC_ASSERT_BIOS_WP_L",
+	/*F7*/		"",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0*/		"",
+	/*Q1*/		"",
+	/*Q2*/		"",
+	/*Q3*/		"",
+	/*Q4*/		"",
+	/*Q5*/		"",
+	/*Q6*/		"id-button", /* in: BMC_CHASSIS_ID_BTN_L */
+	/*Q7*/		"",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z2*/	"","","",
+	/*Z3*/		"post-complete", /* BMC_SYS_MON_PWROK */
+	/*Z4-Z7*/	"","","","",
+	/*AA0*/		"",
+	/*AA1*/		"",
+	/*AA2*/		"",
+	/*AA3*/		"",
+	/*AA4*/		"",
+	/*AA5*/		"",
+	/*AA6*/		"",
+	/*AA7*/		"BMC_ASSERT_BMC_READY",
+	/*AB0*/		"BMC_SPD_SEL",
+	/*AB1-AB7*/	"","","","","","","";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ufispace-ncplite.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ufispace-ncplite.dts
new file mode 100644
index 000000000000..7ab29129d1e4
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ufispace-ncplite.dts
@@ -0,0 +1,360 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright (c) 2022 Ufispace Co., Ltd.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Ufispace NCPLite BMC";
+	compatible = "ufispace,ncplite-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			      <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			      <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+			      <&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		fan-status-int-l {
+			label = "fan-status-int-l";
+			gpios = <&gpio0 ASPEED_GPIO(M, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(M, 2)>;
+		};
+
+		allpwr-good {
+			label = "allpwr-good";
+			gpios = <&gpio0 ASPEED_GPIO(V, 4) GPIO_ACTIVE_HIGH>;
+			linux,code = <ASPEED_GPIO(V, 4)>;
+		};
+
+		psu0-alert-n {
+			label = "psu0-alert-n";
+			gpios = <&gpio0 ASPEED_GPIO(V, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(V, 1)>;
+		};
+
+		psu1-alert-n {
+			label = "psu1-alert-n";
+			gpios = <&gpio0 ASPEED_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(V, 2)>;
+		};
+
+		int-thermal-alert {
+			label = "int-thermal-alert";
+			gpios = <&gpio0 ASPEED_GPIO(P, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(P, 2)>;
+		};
+
+		cpu-caterr-l {
+			label = "cpu-caterr-l";
+			gpios = <&gpio0 ASPEED_GPIO(N, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(N, 3)>;
+		};
+
+		cpu-thermtrip-l {
+			label = "cpu-thermtrip-l";
+			gpios = <&gpio0 ASPEED_GPIO(V, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(V, 5)>;
+		};
+
+		psu0-presence-l {
+			label = "psu0-presence-l";
+			gpios = <&gpio0 ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 6)>;
+		};
+
+		psu1-presence-l {
+			label = "psu1-presence-l";
+			gpios = <&gpio0 ASPEED_GPIO(F, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 7)>;
+		};
+
+		psu0-power-ok {
+			label = "psu0-power-ok";
+			gpios = <&gpio0 ASPEED_GPIO(M, 4) GPIO_ACTIVE_HIGH>;
+			linux,code = <ASPEED_GPIO(M, 4)>;
+		};
+
+		psu1-power-ok {
+			label = "psu1-power-ok";
+			gpios = <&gpio0 ASPEED_GPIO(M, 5) GPIO_ACTIVE_HIGH>;
+			linux,code = <ASPEED_GPIO(M, 5)>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <1000>;
+
+		fan0-presence {
+			label = "fan0-presence";
+			gpios = <&fan_ioexp 2 GPIO_ACTIVE_LOW>;
+			linux,code = <2>;
+		};
+
+		fan1-presence {
+			label = "fan1-presence";
+			gpios = <&fan_ioexp 6 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		fan2-presence {
+			label = "fan2-presence";
+			gpios = <&fan_ioexp 10 GPIO_ACTIVE_LOW>;
+			linux,code = <10>;
+		};
+
+		fan3-presence {
+			label = "fan3-presence";
+			gpios = <&fan_ioexp 14 GPIO_ACTIVE_LOW>;
+			linux,code = <14>;
+		};
+	};
+};
+
+&mac2 {
+	status = "okay";
+	use-ncsi;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&lpc_reset {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&peci0 {
+	status = "okay";
+};
+
+&udc {
+	status = "okay";
+};
+
+&adc0 {
+	vref = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	vref = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	lm75@48 {
+		compatible = "national,lm75";
+		reg = <0x48>;
+	};
+
+	lm75@49 {
+		compatible = "national,lm75";
+		reg = <0x49>;
+	};
+
+	lm86@4c {
+		compatible = "national,lm86";
+		reg = <0x4c>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	lm75@4f {
+		cpmpatible = "national,lm75";
+		reg = <0x4f>;
+	};
+
+	fan_ioexp: pca9535@20 {
+		compatible = "nxp,pca9535";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"","","presence-fan0","",
+		"","","presence-fan1","",
+		"","","presence-fan2","",
+		"","","presence-fan3","";
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <64>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	psu@58 {
+		compatible = "pmbus";
+		reg = <0x58>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <1>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	psu@58 {
+		compatible = "pmbus";
+		reg = <0x58>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <1>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+
+	lm75@4d {
+		compatible = "national,lm75";
+		reg = <0x4d>;
+	};
+};
+
+&gpio0 {
+	status = "okay";
+
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"CPU_PWRGD","","","power-button","host0-ready","","presence-ps0","presence-ps1",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","reset-button","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"power-chassis-control0","power-chassis-control1","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","power-chassis-good","","","";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-n110.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-n110.dts
new file mode 100644
index 000000000000..44b9853f6e63
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-n110.dts
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (C) 2021 YADRO
+/dts-v1/;
+
+#include "aspeed-bmc-vegman.dtsi"
+
+/ {
+	model = "YADRO VEGMAN N110 BMC";
+	compatible = "yadro,vegman-n110-bmc", "aspeed,ast2500";
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"CHASSIS_INTRUSION","CASE_OPEN_FAULT_RST","","","SPEAKER_BMC","FM_FORCE_BMC_UPDATE","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"RESET_BUTTON","RESET_OUT","POWER_BUTTON","POWER_OUT","","","","",
+	/*F0-F7*/	"NMI_OUT","PCIE_NIC_ALERT","","","SKT0_FAULT_LED","","RST_RGMII_PHYRST_DNP","",
+	/*G0-G7*/	"CPU_ERR2","CPU_CATERR","PCH_BMC_THERMTRIP","","IRQ_NMI_EVENT","","","",
+	/*H0-H7*/	"PWRGD_P3V3_RISER1","PWRGD_P3V3_RISER2","PWRGD_P3V3_RISER3","","MIO_BIOS_SEL","_SPI_FLASH_HOLD","_SPI_FLASH_WP","FM_240VA_STATUS",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","_SPI2_BMC_CS_SEL",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"_SPI_RMM4_LITE_CS","","","","","","","",
+	/*S0-S7*/	"_SPI2_BMC_CS1","","","IRQ_SML0_ALERT_MUX","FP_LED_STATUS_GREEN","FP_LED_STATUS_AMBER","FP_ID_LED","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"SIO_S3","SIO_S5","","SIO_ONCONTROL","","","","",
+	/*Z0-Z7*/	"FM_BMC_PWR_BTN","SIO_POWER_GOOD","FM_BMC_PWRBTN_OUT","FM_BMC_PCH_SCI_LPC","","","","",
+	/*AA0-AA7*/	"","IRQ_SML1_PMBUS_ALERT","FM_PVCCIN_CPU0_PWR_IN_ALERT","FM_PVCCIN_CPU1_PWR_IN_ALERT","BMC_SYS_PWR_FAULT","BMC_SYS_PWR_OK","SMI","POST_COMPLETE",
+	/*AB0-AB7*/	"FM_CPU_BMCINIT","NMI_BUTTON","ID_BUTTON","PS_PWROK","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&sgpio {
+	ngpios = <80>;
+	bus-frequency = <2000000>;
+	status = "okay";
+	/* SGPIO lines. even: input, odd: output */
+	gpio-line-names =
+	/*A0-A7*/	"CPU1_PRESENCE","","CPU1_THERMTRIP","","CPU1_VRHOT","","CPU1_FIVR_FAULT","","CPU1_MEM_ABCD_VRHOT","","CPU1_MEM_EFGH_VRHOT","","","","","",
+	/*B0-B7*/	"CPU1_MISMATCH","","CPU1_MEM_THERM_EVENT","","CPU2_PRESENCE","","CPU2_THERMTRIP","","CPU2_VRHOT","","CPU2_FIVR_FAULT","","CPU2_MEM_ABCD_VRHOT","","CPU2_MEM_EFGH_VRHOT","",
+	/*C0-C7*/	"","","","","CPU2_MISMATCH","","CPU2_MEM_THERM_EVENT","","","","","","","","","",
+	/*D0-D7*/	"","","","","","","","","","","","","","","","",
+	/*E0-E7*/	"","","","","","","","","","","","","","","","",
+	/*F0-F7*/	"SGPIO_PLD_MINOR_REV_BIT0","","SGPIO_PLD_MINOR_REV_BIT1","","SGPIO_PLD_MINOR_REV_BIT2","","SGPIO_PLD_MINOR_REV_BIT3","","SGPIO_PLD_MAJOR_REV_BIT0","","SGPIO_PLD_MAJOR_REV_BIT1","","SGPIO_PLD_MAJOR_REV_BIT2","","SGPIO_PLD_MAJOR_REV_BIT3","",
+	/*G0-G7*/	"MAIN_PLD_MINOR_REV_BIT0","","MAIN_PLD_MINOR_REV_BIT1","","MAIN_PLD_MINOR_REV_BIT2","","MAIN_PLD_MINOR_REV_BIT3","","MAIN_PLD_MAJOR_REV_BIT0","","MAIN_PLD_MAJOR_REV_BIT1","","MAIN_PLD_MAJOR_REV_BIT2","","MAIN_PLD_MAJOR_REV_BIT3","",
+	/*H0-H7*/	"","","","","","","","","","","","","","","","",
+	/*I0-I7*/	"","","","","","","","","","","","","","","","",
+	/*J0-J7*/	"","","","","","","","","","","","","","","","";
+};
+
+&i2c11 {
+	/* SMB_BMC_MGMT_LVC3 */
+	gpio@21 {
+		compatible = "nxp,pcal9535";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"", "", "", "", "", "", "PE_PCH_SCR_CLKREQ", "",
+		/*IO1.0-1.7*/	"", "PE_PCH_MEZ_PRSNT", "PE_PCH_MEZ_PRSNT_", "NIC_4_PE_PRSNT", "NIC_3_PE_PRSNT", "NIC_2_PE_PRSNT", "NIC_1_PE_PRSNT", "";
+	};
+	gpio@27 {
+		compatible = "nxp,pca9698";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"PWRGD_PS_PWROK", "PWRGD_DSW_PWROK", "PWRGD_P5V_AUX", "PWRGD_P3V3_AUX", "PWRGD_P5V", "PWRGD_P3V3", "PWRGD_P1V8_PCH_AUX", "PWRGD_PCH_PVNN_AUX",
+		/*IO1.0-1.7*/	"PWRGD_P1V05_PCH_AUX", "PWRGD_PCH_AUX_VRS", "PWRGD_PVCCIN_CPU0", "PWRGD_PVCCSA_CPU0", "PWRGD_PVCCIO_CPU0", "PWRGD_PVMCP_CPU0", "PWRGD_P1V0_CPU0", "PWRGD_PVDDQ_ABC_CPU0",
+		/*IO2.0-2.7*/	"PWRGD_PVPP_ABC_CPU0", "PWRGD_PVTT_ABC_CPU0", "PWRGD_PVDDQ_DEF_CPU0", "PWRGD_PVPP_DEF_CPU0", "PWRGD_PVTT_DEF_CPU0", "", "", "",
+		/*IO3.0-3.7*/	"", "", "", "", "", "", "", "",
+		/*IO4.0-4.7*/	"", "", "", "", "", "", "", "";
+	};
+};
+
+&i2c13 {
+	/* SMB_PCIE2_STBY_LVC3 */
+	i2c-mux@71 {
+		compatible = "nxp,pca9543";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+	};
+	i2c-mux@73 {
+		compatible = "nxp,pca9545";
+		reg = <0x73>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+	};
+};
+
+&i2c2 {
+	/* SMB_PCIE_STBY_LVC3 */
+	i2c-mux@71 {
+		compatible = "nxp,pca9545";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+			 &pinctrl_pwm2_default &pinctrl_pwm3_default
+			 &pinctrl_pwm4_default &pinctrl_pwm5_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x06>;
+	};
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01 0x08>;
+	};
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x09>;
+	};
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03 0x0A>;
+	};
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0B>;
+	};
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-rx20.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-rx20.dts
new file mode 100644
index 000000000000..98f3e0437704
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-rx20.dts
@@ -0,0 +1,255 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (C) 2021 YADRO
+/dts-v1/;
+
+#include "aspeed-bmc-vegman.dtsi"
+
+/ {
+	model = "YADRO VEGMAN Rx20 BMC";
+	compatible = "yadro,vegman-rx20-bmc", "aspeed,ast2500";
+
+	leds {
+		compatible = "gpio-leds";
+
+		temp_alarm {
+			label = "temp:red:status";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(E, 4) GPIO_ACTIVE_LOW>;
+		};
+
+		temp_ok {
+			label = "temp:green:status";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(E, 5) GPIO_ACTIVE_LOW>;
+		};
+
+		psu_fault {
+			label = "psu:red:status";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(E, 6) GPIO_ACTIVE_LOW>;
+		};
+
+		psu_ok {
+			label = "psu:green:status";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"CASE_OPEN_DNP","CASE_OPEN_FAULT_RST_DNP","BEZEL_ON_PWR_P3V3","PWM_PWRGD_EXP_EN","SPEAKER_BMC","FM_FORCE_BMC_UPDATE","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"RESET_BUTTON","RESET_OUT","POWER_BUTTON","POWER_OUT","LED_TEMP_STATUS_R","LED_TEMP_STATUS_G","LED_PWR_STATUS_R","LED_PWR_STATUS_G",
+	/*F0-F7*/	"NMI_OUT","CPU1_DISABLE_COD","","","SKT0_FAULT_LED_DNP","SKT1_FAULT_LED_DNP","RST_RGMII_PHYRST_DNP","",
+	/*G0-G7*/	"CPU_ERR2","CPU_CATERR","PCH_BMC_THERMTRIP","SPI_BMC_BOOT_HD","IRQ_NMI_EVENT","SPI_BMC_BOOT_WP","SPI_BMC_BOOT_WP1","",
+	/*H0-H7*/	"PWRGD_P3V3_RISER1","PWRGD_P3V3_RISER2","PWRGD_P3V3_RISER3","","MIO_BIOS_SEL","_SPI_FLASH_HOLD","_SPI_FLASH_WP","FM_240VA_STATUS",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"SEL_FLASH_SOFT","STATUS_SEL_BMC","","","BMC_WDT_P","ID_BUTTON","PS_PWROK","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","SPI_BIOS_ACTIVE_FLASH_SEL","STATUS_SEL_BIOS",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"_SPI_BMC_BOOT_CS1","","","","","","","",
+	/*S0-S7*/	"_SPI2_BMC_CS1","RSR_A_SMBEXP_RST_INT","RSR_B_SMBEXP_RST_INT","IRQ_SML0_ALERT_MUX","FP_LED_STATUS_GREEN","FP_LED_STATUS_AMBER","FP_ID_LED","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"SIO_S3","SIO_S5","","SIO_ONCONTROL","","","","",
+	/*Z0-Z7*/	"FM_BMC_PWR_BTN","SIO_POWER_GOOD","FM_BMC_PWRBTN_OUT","FM_BMC_PCH_SCI_LPC","","","","",
+	/*AA0-AA7*/	"CPU_CLK_MUX_SEL","IRQ_SML1_PMBUS_ALERT","FM_PVCCIN_CPU0_PWR_IN_ALERT","FM_PVCCIN_CPU1_PWR_IN_ALERT","BMC_SYS_PWR_FAULT","BMC_SYS_PWR_OK","SMI","POST_COMPLETE",
+	/*AB0-AB7*/	"FM_CPU_BMCINIT","NMI_BUTTON","BMC_WDT_RST1","BMC_WDT_RST2","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&sgpio {
+	ngpios = <80>;
+	bus-frequency = <2000000>;
+	status = "okay";
+	/* SGPIO lines. even: input, odd: output */
+	gpio-line-names =
+	/*A0-A7*/	"CPU1_PRESENCE","","CPU1_THERMTRIP","","CPU1_VRHOT","","CPU1_FIVR_FAULT","","CPU1_MEM_ABCD_VRHOT","","CPU1_MEM_EFGH_VRHOT","","","","","",
+	/*B0-B7*/	"CPU1_MISMATCH","","CPU1_MEM_THERM_EVENT","","CPU2_PRESENCE","","CPU2_THERMTRIP","","CPU2_VRHOT","","CPU2_FIVR_FAULT","","CPU2_MEM_ABCD_VRHOT","","CPU2_MEM_EFGH_VRHOT","",
+	/*C0-C7*/	"","","","","CPU2_MISMATCH","","CPU2_MEM_THERM_EVENT","","","","","","","","","",
+	/*D0-D7*/	"","","","","","","","","","","","","","","","",
+	/*E0-E7*/	"","","","","","","","","","","","","","","","",
+	/*F0-F7*/	"SGPIO_PLD_MINOR_REV_BIT0","","SGPIO_PLD_MINOR_REV_BIT1","","SGPIO_PLD_MINOR_REV_BIT2","","SGPIO_PLD_MINOR_REV_BIT3","","SGPIO_PLD_MAJOR_REV_BIT0","","SGPIO_PLD_MAJOR_REV_BIT1","","SGPIO_PLD_MAJOR_REV_BIT2","","SGPIO_PLD_MAJOR_REV_BIT3","",
+	/*G0-G7*/	"MAIN_PLD_MINOR_REV_BIT0","","MAIN_PLD_MINOR_REV_BIT1","","MAIN_PLD_MINOR_REV_BIT2","","MAIN_PLD_MINOR_REV_BIT3","","MAIN_PLD_MAJOR_REV_BIT0","","MAIN_PLD_MAJOR_REV_BIT1","","MAIN_PLD_MAJOR_REV_BIT2","","MAIN_PLD_MAJOR_REV_BIT3","",
+	/*H0-H7*/	"","","","","","","","","","","","","","","","",
+	/*I0-I7*/	"","","","","","","","","","","","","","","","",
+	/*J0-J7*/	"","","","","","","","","","","","","","","","";
+};
+
+&i2c11 {
+	/* SMB_BMC_MGMT_LVC3 */
+	gpio@21 {
+		compatible = "nxp,pcal9535";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"ETH3_CLK_REQ", "ETH2_CLK_REQ", "RSR_A_PCIE_X16_2_PRSNT", "RSR_B_PCIE_X16_2_PRSNT", "", "RSR_B_PCIE_X8_3_PRSNT", "RSR_B_PCIE_X8_4_PRSNT", "RSR_B_PCIE_X16_PRSNT_N",
+		/*IO1.0-1.7*/	"RSR_B_PCIE_X8_2_PRSNT", "RSR_B_PCIE_X8_1_PRSNT", "NIC_1_PE_BUF_PRSNT", "RSR_A_PCIE_X16_PRSNT", "RSR_A_PCIE_X8_3_PRSNT", "RSR_A_PCIE_X8_2_PRSNT", "RSR_A_PCIE_X8_1_PRSNT_N", "";
+	};
+	gpio@23 {
+		compatible = "nxp,pcal9535";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"FM_LINK_WIDTH_ID0", "FM_LINK_WIDTH_ID0", "FM_LINK_WIDTH_ID0", "FM_LINK_WIDTH_ID0", "FM_LINK_WIDTH_ID0", "", "", "",
+		/*IO1.0-1.7*/	"", "", "", "", "", "", "", "";
+	};
+	gpio@27 {
+		compatible = "nxp,pca9698";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"PWRGD_PS_PWROK", "PWRGD_DSW_PWROK", "PWRGD_P5V_AUX", "PWRGD_P3V3_AUX", "PWRGD_P5V", "PWRGD_P3V3", "PWRGD_P1V8_PCH_AUX", "PWRGD_PCH_PVNN_AUX",
+		/*IO1.0-1.7*/	"PWRGD_P1V05_PCH_AUX", "PWRGD_PCH_AUX_VRS", "PWRGD_PVCCIN_CPU0", "PWRGD_PVCCSA_CPU0", "PWRGD_PVCCIO_CPU0", "PWRGD_PVMCP_CPU0", "PWRGD_P1V0_CPU0", "PWRGD_PVDDQ_ABC_CPU0",
+		/*IO2.0-2.7*/	"PWRGD_PVPP_ABC_CPU0", "PWRGD_PVTT_ABC_CPU0", "PWRGD_PVDDQ_DEF_CPU0", "PWRGD_PVPP_DEF_CPU0", "PWRGD_PVTT_DEF_CPU0", "PWRGD_PVCCIN_CPU1", "PWRGD_PVCCSA_CPU1", "PWRGD_PVCCIO_CPU1",
+		/*IO3.0-3.7*/	"PWRGD_PVMCP_CPU1", "PWRGD_P1V0_CPU1", "PWRGD_PVDDQ_GHJ_CPU1", "PWRGD_PVPP_GHJ_CPU1", "PWRGD_PVTT_GHJ_CPU1", "PWRGD_PVDDQ_KLM_CPU1", "PWRGD_PVPP_KLM_CPU1", "PWRGD_PVTT_KLM_CPU1",
+		/*IO4.0-4.7*/	"PCH_PWR_RESET_N", "FM_BOARD_SKU_ID0", "FM_BOARD_SKU_ID1", "FM_BOARD_SKU_ID2", "FM_BOARD_SKU_ID3", "FM_BOARD_SKU_ID4", "FM_BOARD_REV_ID0", "FM_BOARD_REV_ID1";
+	};
+	gpio@39 {
+		compatible = "nxp,pca9554";
+		reg = <0x39>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"FAN_FAULT_0", "FAN_FAULT_1", "FAN_FAULT_2", "FAN_FAULT_3", "FAN_FAULT_4", "FAN_FAULT_5", "FAN_FAULT_6", "";
+	};
+};
+
+&i2c13 {
+	/* SMB_PCIE2_STBY_LVC3 */
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			i2c-mux@72 {
+				compatible = "nxp,pca9548";
+				reg = <0x72>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+					eeprom@50 {
+						compatible = "atmel,24c64";
+						reg = <0x50>;
+						pagesize = <32>;
+						size = <8192>;
+						address-width = <16>;
+					};
+				};
+			};
+		};
+	};
+	i2c-mux@71 {
+		compatible = "nxp,pca9543";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+	};
+};
+
+&i2c2 {
+	/* SMB_PCIE_STBY_LVC3 */
+	i2c-mux@71 {
+		compatible = "nxp,pca9548";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			i2c-mux@72 {
+				compatible = "nxp,pca9548";
+				reg = <0x72>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+					eeprom@50 {
+						compatible = "atmel,24c64";
+						reg = <0x50>;
+						pagesize = <32>;
+						size = <8192>;
+						address-width = <16>;
+					};
+				};
+			};
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+				pagesize = <32>;
+				size = <8192>;
+				address-width = <16>;
+			};
+		};
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+			 &pinctrl_pwm2_default &pinctrl_pwm3_default
+			 &pinctrl_pwm4_default &pinctrl_pwm5_default
+			 &pinctrl_pwm6_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x07>;
+	};
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01 0x08>;
+	};
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x09>;
+	};
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03 0x0A>;
+	};
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0B>;
+	};
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05 0x0C>;
+	};
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x0D>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-sx20.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-sx20.dts
new file mode 100644
index 000000000000..933ca831d375
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-sx20.dts
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (C) 2021 YADRO
+/dts-v1/;
+
+#include "aspeed-bmc-vegman.dtsi"
+
+/ {
+	model = "YADRO VEGMAN Sx20 BMC";
+	compatible = "yadro,vegman-sx20-bmc", "aspeed,ast2500";
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"CHASSIS_INTRUSION","CASE_OPEN_FAULT_RST","","","SPEAKER_BMC","FM_FORCE_BMC_UPDATE","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"RESET_BUTTON","RESET_OUT","POWER_BUTTON","POWER_OUT","","","","",
+	/*F0-F7*/	"NMI_OUT","CPU1_DISABLE_COD","","","SKT0_FAULT_LED","SKT1_FAULT_LED","RST_RGMII_PHYRST_DNP","",
+	/*G0-G7*/	"CPU_ERR2","CPU_CATERR","PCH_BMC_THERMTRIP","","IRQ_NMI_EVENT","","","",
+	/*H0-H7*/	"PWRGD_P3V3_RISER1","PWRGD_P3V3_RISER2","PWRGD_P3V3_RISER3","","MIO_BIOS_SEL","_SPI_FLASH_HOLD","_SPI_FLASH_WP","FM_240VA_STATUS",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","BMC_GPU_RISER_ID1","BMC_GPU_RISER_ID0","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","_SPI2_BMC_CS_SEL",
+	/*P0-P7*/	"","P12V_HDDS_A_EN","P12V_HDDS_B_EN","P5V_HDDS_A_EN","PWRGD_P5V_HDDS_A","P5V_HDDS_B_EN","PWRGD_P5V_HDDS_B","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"_SPI_RMM4_LITE_CS","","","","","","","",
+	/*S0-S7*/	"_SPI2_BMC_CS1","","","IRQ_SML0_ALERT_MUX","FP_LED_STATUS_GREEN","FP_LED_STATUS_AMBER","FP_ID_LED","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"SIO_S3","SIO_S5","","SIO_ONCONTROL","","","","",
+	/*Z0-Z7*/	"FM_BMC_PWR_BTN","SIO_POWER_GOOD","FM_BMC_PWRBTN_OUT","FM_BMC_PCH_SCI_LPC","","","","",
+	/*AA0-AA7*/	"CPU_CLK_MUX_SEL","IRQ_SML1_PMBUS_ALERT","FM_PVCCIN_CPU0_PWR_IN_ALERT","FM_PVCCIN_CPU1_PWR_IN_ALERT","BMC_SYS_PWR_FAULT","BMC_SYS_PWR_OK","SMI","POST_COMPLETE",
+	/*AB0-AB7*/	"FM_CPU_BMCINIT","NMI_BUTTON","ID_BUTTON","PS_PWROK","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&sgpio {
+	ngpios = <80>;
+	bus-frequency = <2000000>;
+	status = "okay";
+	/* SGPIO lines. even: input, odd: output */
+	gpio-line-names =
+	/*A0-A7*/	"CPU1_PRESENCE","","CPU1_THERMTRIP","","CPU1_VRHOT","","CPU1_FIVR_FAULT","","CPU1_MEM_ABCD_VRHOT","","CPU1_MEM_EFGH_VRHOT","","","","","",
+	/*B0-B7*/	"CPU1_MISMATCH","","CPU1_MEM_THERM_EVENT","","CPU2_PRESENCE","","CPU2_THERMTRIP","","CPU2_VRHOT","","CPU2_FIVR_FAULT","","CPU2_MEM_ABCD_VRHOT","","CPU2_MEM_EFGH_VRHOT","",
+	/*C0-C7*/	"","","","","CPU2_MISMATCH","","CPU2_MEM_THERM_EVENT","","","","","","","","","",
+	/*D0-D7*/	"","","","","","","","","","","","","","","","",
+	/*E0-E7*/	"","","","","","","","","","","","","","","","",
+	/*F0-F7*/	"SGPIO_PLD_MINOR_REV_BIT0","","SGPIO_PLD_MINOR_REV_BIT1","","SGPIO_PLD_MINOR_REV_BIT2","","SGPIO_PLD_MINOR_REV_BIT3","","SGPIO_PLD_MAJOR_REV_BIT0","","SGPIO_PLD_MAJOR_REV_BIT1","","SGPIO_PLD_MAJOR_REV_BIT2","","SGPIO_PLD_MAJOR_REV_BIT3","",
+	/*G0-G7*/	"MAIN_PLD_MINOR_REV_BIT0","","MAIN_PLD_MINOR_REV_BIT1","","MAIN_PLD_MINOR_REV_BIT2","","MAIN_PLD_MINOR_REV_BIT3","","MAIN_PLD_MAJOR_REV_BIT0","","MAIN_PLD_MAJOR_REV_BIT1","","MAIN_PLD_MAJOR_REV_BIT2","","MAIN_PLD_MAJOR_REV_BIT3","",
+	/*H0-H7*/	"","","","","","","","","","","","","","","","",
+	/*I0-I7*/	"","","","","","","","","","","","","","","","",
+	/*J0-J7*/	"","","","","","","","","","","","","","","","";
+};
+
+&i2c11 {
+	/* SMB_BMC_MGMT_LVC3 */
+	gpio@21 {
+		compatible = "nxp,pcal9535";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"", "", "CPU1_PE3_0_SLOT_PRSNT", "", "CPU1_PE1_GPU_PRSNT", "CPU1_PE3_1_SLOT_PRSNT", "PE_PCH_MEZ_PRSNT", "CPU0_PE3_1_SLOT_PRSNT",
+		/*IO1.0-1.7*/	"CPU0_PE1_GPU_PRSNT", "CPU0_PE2_NVME2_PRSNT", "CPU1_PE2_NVME3_PRSNT", "CPU1_PE2_SLOT_PRSNT", "CPU1_PE2_NVME4_PRSNT", "", "CPU0_PE2_NVME1_PRSNT", "CPU0_PE3_0_RAID_PRSNT";
+	};
+	gpio@27 {
+		compatible = "nxp,pca9698";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"PWRGD_PS_PWROK", "PWRGD_DSW_PWROK", "PWRGD_P5V_AUX", "PWRGD_P3V3_AUX", "PWRGD_P5V", "PWRGD_P3V3", "PWRGD_P1V8_PCH_AUX", "PWRGD_PCH_PVNN_AUX",
+		/*IO1.0-1.7*/	"PWRGD_P1V05_PCH_AUX", "PWRGD_PCH_AUX_VRS", "PWRGD_PVCCIN_CPU0", "PWRGD_PVCCSA_CPU0", "PWRGD_PVCCIO_CPU0", "PWRGD_PVMCP_CPU0", "PWRGD_P1V0_CPU0", "PWRGD_PVDDQ_ABC_CPU0",
+		/*IO2.0-2.7*/	"PWRGD_PVPP_ABC_CPU0", "PWRGD_PVTT_ABC_CPU0", "PWRGD_PVDDQ_DEF_CPU0", "PWRGD_PVPP_DEF_CPU0", "PWRGD_PVTT_DEF_CPU0", "PWRGD_PVCCIN_CPU1", "PWRGD_PVCCSA_CPU1", "PWRGD_PVCCIO_CPU1",
+		/*IO3.0-3.7*/	"PWRGD_PVMCP_CPU1", "PWRGD_P1V0_CPU1", "PWRGD_PVDDQ_GHJ_CPU1", "PWRGD_PVPP_GHJ_CPU1", "PWRGD_PVTT_GHJ_CPU1", "PWRGD_PVDDQ_KLM_CPU1", "PWRGD_PVPP_KLM_CPU1", "PWRGD_PVTT_KLM_CPU1",
+		/*IO4.0-4.7*/	"PWRGD_P5V_HDDS_A_R", "PWRGD_P5V_HDDS_B_R", "", "", "", "", "", "";
+	};
+};
+
+&i2c13 {
+	/* SMB_PCIE2_STBY_LVC3 */
+	i2c-mux@71 {
+		compatible = "nxp,pca9543";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+	};
+	i2c-mux@73 {
+		compatible = "nxp,pca9545";
+		reg = <0x73>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+	};
+};
+
+&i2c2 {
+	/* SMB_PCIE_STBY_LVC3 */
+	i2c-mux@71 {
+		compatible = "nxp,pca9545";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+			 &pinctrl_pwm2_default &pinctrl_pwm3_default
+			 &pinctrl_pwm4_default &pinctrl_pwm5_default
+			 &pinctrl_pwm6_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman.dtsi b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman.dtsi
new file mode 100644
index 000000000000..8c953e3a1d41
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman.dtsi
@@ -0,0 +1,311 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (C) 2021 YADRO
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlyprintk";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		ramoops@9eff0000 {
+			compatible = "ramoops";
+			reg = <0x9eff0000 0x10000>;
+			record-size = <0x2000>;
+			console-size = <0x2000>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		identify {
+			label = "platform:blue:indicator";
+			linux,default-trigger = "heartbeat";
+			gpios = <&gpio ASPEED_GPIO(S, 6) GPIO_ACTIVE_LOW>;
+		};
+
+		status_amber {
+			label = "platform:red:status";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(S, 5) GPIO_ACTIVE_LOW>;
+		};
+
+		status_green {
+			label = "platform:green:status";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(S, 4) GPIO_ACTIVE_LOW>;
+		};
+
+		power_fault {
+			label = "platform:red:power";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(AA, 4) GPIO_ACTIVE_LOW>;
+		};
+
+		power_ok {
+			label = "platform:green:power";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(AA, 5) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	beeper {
+		compatible = "pwm-beeper";
+		pwms = <&timer 5 1000000 0>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&spi2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2ck_default
+			&pinctrl_spi2miso_default
+			&pinctrl_spi2mosi_default
+			&pinctrl_spi2cs0_default>;
+	flash@0 {
+		status = "okay";
+		label = "bios";
+		m25p,fast-read;
+	};
+};
+
+&mac0 {
+	status = "okay";
+	use-ncsi;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+
+	phy-mode = "rgmii";
+	phy-handle = <&phy>;
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: ethernet-phy@1 {
+			/* KSZ9131 */
+			compatible = "ethernet-phy-id0022.1640";
+			reg = <1>;
+
+			micrel,led-mode = <0>;
+		};
+	};
+};
+
+&vhub {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&sdmmc {
+	status = "okay";
+};
+
+&sdhci1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sd2_default>;
+	disable-wp;
+};
+
+&timer {
+	fttmr010,pwm-outputs = <5>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_timer5_default>;
+	#pwm-cells = <3>;
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xCA2>;
+	status = "okay";
+};
+
+&kcs4 {
+	aspeed,lpc-io-reg = <0xCA4>;
+	status = "okay";
+};
+
+&lpc_snoop {
+	snoop-ports = <0x80>;
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+};
+
+&uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+};
+
+&i2c0 {
+	/* SMB_IPMB_STBY_LVC3 */
+	multi-master;
+	status = "okay";
+};
+
+&i2c1 {
+	/* SMB_CHASSENSOR_STBY_LVC3 */
+	status = "okay";
+};
+
+&i2c2 {
+	/* SMB_PCIE_STBY_LVC3 */
+	status = "okay";
+};
+
+&i2c3 {
+	/* SMB_HOST_STBY_LVC3 */
+	multi-master;
+	status = "okay";
+};
+
+&i2c4 {
+	/* BMC_PMBUS2_STBY */
+	status = "okay";
+};
+
+&i2c5 {
+	/* SMB_SMLINK0_STBY_LVC3 */
+	bus-frequency = <1000000>;
+	multi-master;
+	status = "okay";
+};
+
+&i2c6 {
+	/* SMB_TEMPSENSOR_STBY_LVC3 */
+	multi-master;
+	status = "okay";
+};
+
+&i2c7 {
+	/* SMB_SM_PMB1_SML1_STBY_LVC3 */
+	multi-master;
+	status = "okay";
+};
+
+&i2c9 {
+	/* SMB_BMC_ETH3_LVC3 */
+	status = "okay";
+};
+
+&i2c10 {
+	/* SMB_BMC_ETH2_LVC3 */
+	status = "okay";
+};
+
+&i2c11 {
+	/* SMB_BMC_MGMT_LVC3 */
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		size = <8192>;
+		address-width = <16>;
+	};
+};
+
+&i2c12 {
+	/* SMB_BMC_FAULT_EXP_LVC3 */
+	status = "okay";
+};
+
+&i2c13 {
+	/* SMB_PCIE2_STBY_LVC3 */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
index c5aeb3cf3a09..c3d4d916c69b 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
@@ -54,8 +54,7 @@
 		ranges;
 
 		fmc: spi@1e620000 {
-			reg = < 0x1e620000 0x94
-				0x20000000 0x10000000 >;
+			reg = <0x1e620000 0x94>, <0x20000000 0x10000000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "aspeed,ast2400-fmc";
@@ -65,34 +64,42 @@
 			flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
 				spi-max-frequency = <50000000>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
+				spi-max-frequency = <50000000>;
 				status = "disabled";
 			};
 			flash@2 {
 				reg = < 2 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
+				spi-max-frequency = <50000000>;
 				status = "disabled";
 			};
 			flash@3 {
 				reg = < 3 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
+				spi-max-frequency = <50000000>;
 				status = "disabled";
 			};
 			flash@4 {
 				reg = < 4 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
+				spi-max-frequency = <50000000>;
 				status = "disabled";
 			};
 		};
 
 		spi: spi@1e630000 {
-			reg = < 0x1e630000 0x18
-				0x30000000 0x10000000 >;
+			reg = <0x1e630000 0x18>, <0x30000000 0x10000000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "aspeed,ast2400-spi";
@@ -102,6 +109,7 @@
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
@@ -114,8 +122,8 @@
 			reg = <0x1e6c0080 0x80>;
 		};
 
-		cvic: copro-interrupt-controller@1e6c2000 {
-			compatible = "aspeed,ast2400-cvic", "aspeed-cvic";
+		cvic: interrupt-controller@1e6c2000 {
+			compatible = "aspeed,ast2400-cvic", "aspeed,cvic";
 			valid-sources = <0x7fffffff>;
 			reg = <0x1e6c2000 0x80>;
 		};
@@ -222,6 +230,9 @@
 			sram: sram@1e720000 {
 				compatible = "mmio-sram";
 				reg = <0x1e720000 0x8000>;	// 32K
+				ranges;
+				#address-cells = <1>;
+				#size-cells = <1>;
 			};
 
 			video: video@1e700000 {
@@ -345,7 +356,6 @@
 			lpc: lpc@1e789000 {
 				compatible = "aspeed,ast2400-lpc-v2", "simple-mfd", "syscon";
 				reg = <0x1e789000 0x1000>;
-				reg-io-width = <4>;
 
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -381,10 +391,28 @@
 					compatible = "aspeed,ast2400-ibt-bmc";
 					reg = <0x140 0x18>;
 					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				uart_routing: uart-routing@9c {
+					compatible = "aspeed,ast2400-uart-routing";
+					reg = <0x9c 0x4>;
 					status = "disabled";
 				};
 			};
 
+			peci0: peci-controller@1e78b000 {
+				compatible = "aspeed,ast2400-peci";
+				reg = <0x1e78b000 0x60>;
+				interrupts = <15>;
+				clocks = <&syscon ASPEED_CLK_GATE_REFCLK>;
+				resets = <&syscon ASPEED_RESET_PECI>;
+				cmd-timeout-ms = <1000>;
+				clock-frequency = <1000000>;
+				status = "disabled";
+			};
+
 			uart2: serial@1e78d000 {
 				compatible = "ns16550a";
 				reg = <0x1e78d000 0x20>;
@@ -437,10 +465,9 @@
 		interrupt-controller;
 	};
 
-	i2c0: i2c-bus@40 {
+	i2c0: i2c@40 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x40 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -453,10 +480,9 @@
 		/* Does not need pinctrl properties */
 	};
 
-	i2c1: i2c-bus@80 {
+	i2c1: i2c@80 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x80 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -469,10 +495,9 @@
 		/* Does not need pinctrl properties */
 	};
 
-	i2c2: i2c-bus@c0 {
+	i2c2: i2c@c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0xc0 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -486,10 +511,9 @@
 		status = "disabled";
 	};
 
-	i2c3: i2c-bus@100 {
+	i2c3: i2c@100 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x100 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -503,10 +527,9 @@
 		status = "disabled";
 	};
 
-	i2c4: i2c-bus@140 {
+	i2c4: i2c@140 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x140 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -520,10 +543,9 @@
 		status = "disabled";
 	};
 
-	i2c5: i2c-bus@180 {
+	i2c5: i2c@180 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x180 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -537,10 +559,9 @@
 		status = "disabled";
 	};
 
-	i2c6: i2c-bus@1c0 {
+	i2c6: i2c@1c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x1c0 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -554,10 +575,9 @@
 		status = "disabled";
 	};
 
-	i2c7: i2c-bus@300 {
+	i2c7: i2c@300 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x300 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -571,10 +591,9 @@
 		status = "disabled";
 	};
 
-	i2c8: i2c-bus@340 {
+	i2c8: i2c@340 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x340 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -588,10 +607,9 @@
 		status = "disabled";
 	};
 
-	i2c9: i2c-bus@380 {
+	i2c9: i2c@380 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x380 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -605,10 +623,9 @@
 		status = "disabled";
 	};
 
-	i2c10: i2c-bus@3c0 {
+	i2c10: i2c@3c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x3c0 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -622,10 +639,9 @@
 		status = "disabled";
 	};
 
-	i2c11: i2c-bus@400 {
+	i2c11: i2c@400 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x400 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -639,10 +655,9 @@
 		status = "disabled";
 	};
 
-	i2c12: i2c-bus@440 {
+	i2c12: i2c@440 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x440 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -656,10 +671,9 @@
 		status = "disabled";
 	};
 
-	i2c13: i2c-bus@480 {
+	i2c13: i2c@480 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x480 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
index 73ca1ec6fc24..39500bdb4747 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
@@ -55,8 +55,7 @@
 		ranges;
 
 		fmc: spi@1e620000 {
-			reg = < 0x1e620000 0xc4
-				0x20000000 0x10000000 >;
+			reg = <0x1e620000 0xc4>, <0x20000000 0x10000000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "aspeed,ast2500-fmc";
@@ -67,25 +66,27 @@
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@2 {
 				reg = < 2 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
 
 		spi1: spi@1e630000 {
-			reg = < 0x1e630000 0xc4
-				0x30000000 0x08000000 >;
+			reg = <0x1e630000 0xc4>, <0x30000000 0x08000000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "aspeed,ast2500-spi";
@@ -95,19 +96,20 @@
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
 
 		spi2: spi@1e631000 {
-			reg = < 0x1e631000 0xc4
-				0x38000000 0x08000000 >;
+			reg = <0x1e631000 0xc4>, <0x38000000 0x08000000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "aspeed,ast2500-spi";
@@ -117,12 +119,14 @@
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
@@ -135,8 +139,8 @@
 			reg = <0x1e6c0080 0x80>;
 		};
 
-		cvic: copro-interrupt-controller@1e6c2000 {
-			compatible = "aspeed,ast2500-cvic", "aspeed-cvic";
+		cvic: interrupt-controller@1e6c2000 {
+			compatible = "aspeed,ast2500-cvic", "aspeed,cvic";
 			valid-sources = <0xffffffff>;
 			copro-sw-interrupts = <1>;
 			reg = <0x1e6c2000 0x80>;
@@ -258,10 +262,17 @@
 				quality = <100>;
 			};
 
+			hace: crypto@1e6e3000 {
+				compatible = "aspeed,ast2500-hace";
+				reg = <0x1e6e3000 0x100>;
+				interrupts = <4>;
+				clocks = <&syscon ASPEED_CLK_GATE_YCLK>;
+				resets = <&syscon ASPEED_RESET_HACE>;
+			};
+
 			gfx: display@1e6e6000 {
 				compatible = "aspeed,ast2500-gfx", "syscon";
 				reg = <0x1e6e6000 0x1000>;
-				reg-io-width = <4>;
 				clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
 				resets = <&syscon ASPEED_RESET_CRT1>;
 				syscon = <&syscon>;
@@ -269,17 +280,6 @@
 				interrupts = <0x19>;
 			};
 
-			xdma: xdma@1e6e7000 {
-				compatible = "aspeed,ast2500-xdma";
-				reg = <0x1e6e7000 0x100>;
-				clocks = <&syscon ASPEED_CLK_GATE_BCLK>;
-				resets = <&syscon ASPEED_RESET_XDMA>;
-				interrupts-extended = <&vic 6>, <&scu_ic ASPEED_AST2500_SCU_IC_PCIE_RESET_LO_TO_HI>;
-				aspeed,pcie-device = "bmc";
-				aspeed,scu = <&syscon>;
-				status = "disabled";
-			};
-
 			adc: adc@1e6e9000 {
 				compatible = "aspeed,ast2500-adc";
 				reg = <0x1e6e9000 0xb0>;
@@ -302,6 +302,9 @@
 			sram: sram@1e720000 {
 				compatible = "mmio-sram";
 				reg = <0x1e720000 0x9000>;	// 36K
+				ranges;
+				#address-cells = <1>;
+				#size-cells = <1>;
 			};
 
 			sdmmc: sd-controller@1e740000 {
@@ -351,6 +354,7 @@
 				interrupts = <40>;
 				reg = <0x1e780200 0x0100>;
 				clocks = <&syscon ASPEED_CLK_APB>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 				bus-frequency = <12000000>;
 				pinctrl-names = "default";
@@ -436,7 +440,6 @@
 			lpc: lpc@1e789000 {
 				compatible = "aspeed,ast2500-lpc-v2", "simple-mfd", "syscon";
 				reg = <0x1e789000 0x1000>;
-				reg-io-width = <4>;
 
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -446,6 +449,7 @@
 					compatible = "aspeed,ast2500-kcs-bmc-v2";
 					reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
 					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
 					status = "disabled";
 				};
 
@@ -453,6 +457,7 @@
 					compatible = "aspeed,ast2500-kcs-bmc-v2";
 					reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>;
 					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
 					status = "disabled";
 				};
 
@@ -460,6 +465,7 @@
 					compatible = "aspeed,ast2500-kcs-bmc-v2";
 					reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>;
 					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
 					status = "disabled";
 				};
 
@@ -467,6 +473,7 @@
 					compatible = "aspeed,ast2500-kcs-bmc-v2";
 					reg = <0x114 0x1>, <0x118 0x1>, <0x11c 0x1>;
 					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
 					status = "disabled";
 				};
 
@@ -491,6 +498,12 @@
 					#reset-cells = <1>;
 				};
 
+				uart_routing: uart-routing@9c {
+					compatible = "aspeed,ast2500-uart-routing";
+					reg = <0x9c 0x4>;
+					status = "disabled";
+				};
+
 				lhc: lhc@a0 {
 					compatible = "aspeed,ast2500-lhc";
 					reg = <0xa0 0x24 0xc8 0x8>;
@@ -501,10 +514,22 @@
 					compatible = "aspeed,ast2500-ibt-bmc";
 					reg = <0x140 0x18>;
 					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
 					status = "disabled";
 				};
 			};
 
+			peci0: peci-controller@1e78b000 {
+				compatible = "aspeed,ast2500-peci";
+				reg = <0x1e78b000 0x60>;
+				interrupts = <15>;
+				clocks = <&syscon ASPEED_CLK_GATE_REFCLK>;
+				resets = <&syscon ASPEED_RESET_PECI>;
+				cmd-timeout-ms = <1000>;
+				clock-frequency = <1000000>;
+				status = "disabled";
+			};
+
 			uart2: serial@1e78d000 {
 				compatible = "ns16550a";
 				reg = <0x1e78d000 0x20>;
@@ -557,10 +582,9 @@
 		interrupt-controller;
 	};
 
-	i2c0: i2c-bus@40 {
+	i2c0: i2c@40 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x40 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -573,10 +597,9 @@
 		/* Does not need pinctrl properties */
 	};
 
-	i2c1: i2c-bus@80 {
+	i2c1: i2c@80 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x80 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -589,10 +612,9 @@
 		/* Does not need pinctrl properties */
 	};
 
-	i2c2: i2c-bus@c0 {
+	i2c2: i2c@c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0xc0 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -606,10 +628,9 @@
 		status = "disabled";
 	};
 
-	i2c3: i2c-bus@100 {
+	i2c3: i2c@100 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x100 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -623,10 +644,9 @@
 		status = "disabled";
 	};
 
-	i2c4: i2c-bus@140 {
+	i2c4: i2c@140 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x140 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -640,10 +660,9 @@
 		status = "disabled";
 	};
 
-	i2c5: i2c-bus@180 {
+	i2c5: i2c@180 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x180 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -657,10 +676,9 @@
 		status = "disabled";
 	};
 
-	i2c6: i2c-bus@1c0 {
+	i2c6: i2c@1c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x1c0 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -674,10 +692,9 @@
 		status = "disabled";
 	};
 
-	i2c7: i2c-bus@300 {
+	i2c7: i2c@300 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x300 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -691,10 +708,9 @@
 		status = "disabled";
 	};
 
-	i2c8: i2c-bus@340 {
+	i2c8: i2c@340 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x340 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -708,10 +724,9 @@
 		status = "disabled";
 	};
 
-	i2c9: i2c-bus@380 {
+	i2c9: i2c@380 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x380 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -725,10 +740,9 @@
 		status = "disabled";
 	};
 
-	i2c10: i2c-bus@3c0 {
+	i2c10: i2c@3c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x3c0 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -742,10 +756,9 @@
 		status = "disabled";
 	};
 
-	i2c11: i2c-bus@400 {
+	i2c11: i2c@400 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x400 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -759,10 +772,9 @@
 		status = "disabled";
 	};
 
-	i2c12: i2c-bus@440 {
+	i2c12: i2c@440 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x440 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -776,10 +788,9 @@
 		status = "disabled";
 	};
 
-	i2c13: i2c-bus@480 {
+	i2c13: i2c@480 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x480 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
diff --git a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6-pinctrl.dtsi
index 6dde51c2aed3..e87c4b58994a 100644
--- a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g6-pinctrl.dtsi
@@ -117,9 +117,9 @@
 		groups = "FWSPID";
 	};
 
-	pinctrl_fwqspid_default: fwqspid_default {
-		function = "FWQSPID";
-		groups = "FWQSPID";
+	pinctrl_fwqspi_default: fwqspi_default {
+		function = "FWQSPI";
+		groups = "FWQSPI";
 	};
 
 	pinctrl_fwspiwp_default: fwspiwp_default {
@@ -297,6 +297,16 @@
 		groups = "I2C9";
 	};
 
+	pinctrl_i3c1_default: i3c1_default {
+		function = "I3C1";
+		groups = "I3C1";
+	};
+
+	pinctrl_i3c2_default: i3c2_default {
+		function = "I3C2";
+		groups = "I3C2";
+	};
+
 	pinctrl_i3c3_default: i3c3_default {
 		function = "I3C3";
 		groups = "I3C3";
@@ -402,6 +412,16 @@
 		groups = "MDIO4";
 	};
 
+	pinctrl_ncsi3_default: ncsi3_default {
+		function = "RMII3";
+		groups = "NCSI3";
+	};
+
+	pinctrl_ncsi4_default: ncsi4_default {
+		function = "RMII4";
+		groups = "NCSI4";
+	};
+
 	pinctrl_ncts1_default: ncts1_default {
 		function = "NCTS1";
 		groups = "NCTS1";
@@ -653,12 +673,12 @@
 	};
 
 	pinctrl_qspi1_default: qspi1_default {
-		function = "QSPI1";
+		function = "SPI1";
 		groups = "QSPI1";
 	};
 
 	pinctrl_qspi2_default: qspi2_default {
-		function = "QSPI2";
+		function = "SPI2";
 		groups = "QSPI2";
 	};
 
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
index 1b47be1704f8..f8662c8ac089 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
@@ -36,6 +36,10 @@
 		serial4 = &uart5;
 		serial5 = &vuart1;
 		serial6 = &vuart2;
+		mdio0 = &mdio0;
+		mdio1 = &mdio1;
+		mdio2 = &mdio2;
+		mdio3 = &mdio3;
 	};
 
 
@@ -94,9 +98,13 @@
 			    <0x40466000 0x2000>;
 			};
 
+		ahbc: bus@1e600000 {
+			compatible = "aspeed,ast2600-ahbc", "syscon";
+			reg = <0x1e600000 0x100>;
+		};
+
 		fmc: spi@1e620000 {
-			reg = < 0x1e620000 0xc4
-				0x20000000 0x10000000 >;
+			reg = <0x1e620000 0xc4>, <0x20000000 0x10000000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "aspeed,ast2600-fmc";
@@ -107,25 +115,27 @@
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@2 {
 				reg = < 2 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
 
 		spi1: spi@1e630000 {
-			reg = < 0x1e630000 0xc4
-				0x30000000 0x10000000 >;
+			reg = <0x1e630000 0xc4>, <0x30000000 0x10000000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "aspeed,ast2600-spi";
@@ -135,19 +145,20 @@
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
 
 		spi2: spi@1e631000 {
-			reg = < 0x1e631000 0xc4
-				0x50000000 0x10000000 >;
+			reg = <0x1e631000 0xc4>, <0x50000000 0x10000000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "aspeed,ast2600-spi";
@@ -157,18 +168,21 @@
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@2 {
 				reg = < 2 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
@@ -181,6 +195,7 @@
 			status = "disabled";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_mdio1_default>;
+			resets = <&syscon ASPEED_RESET_MII>;
 		};
 
 		mdio1: mdio@1e650008 {
@@ -191,6 +206,7 @@
 			status = "disabled";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_mdio2_default>;
+			resets = <&syscon ASPEED_RESET_MII>;
 		};
 
 		mdio2: mdio@1e650010 {
@@ -201,6 +217,7 @@
 			status = "disabled";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_mdio3_default>;
+			resets = <&syscon ASPEED_RESET_MII>;
 		};
 
 		mdio3: mdio@1e650018 {
@@ -211,43 +228,36 @@
 			status = "disabled";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_mdio4_default>;
+			resets = <&syscon ASPEED_RESET_MII>;
 		};
 
-		mac0: ftgmac@1e660000 {
+		mac0: ethernet@1e660000 {
 			compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
 			reg = <0x1e660000 0x180>;
-			#address-cells = <1>;
-			#size-cells = <0>;
 			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>;
 			status = "disabled";
 		};
 
-		mac1: ftgmac@1e680000 {
+		mac1: ethernet@1e680000 {
 			compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
 			reg = <0x1e680000 0x180>;
-			#address-cells = <1>;
-			#size-cells = <0>;
 			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>;
 			status = "disabled";
 		};
 
-		mac2: ftgmac@1e670000 {
+		mac2: ethernet@1e670000 {
 			compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
 			reg = <0x1e670000 0x180>;
-			#address-cells = <1>;
-			#size-cells = <0>;
 			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>;
 			status = "disabled";
 		};
 
-		mac3: ftgmac@1e690000 {
+		mac3: ethernet@1e690000 {
 			compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
 			reg = <0x1e690000 0x180>;
-			#address-cells = <1>;
-			#size-cells = <0>;
 			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>;
 			status = "disabled";
@@ -298,12 +308,30 @@
 			status = "disabled";
 		};
 
+		udc: usb@1e6a2000 {
+			compatible = "aspeed,ast2600-udc";
+			reg = <0x1e6a2000 0x300>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2bd_default>;
+			status = "disabled";
+		};
+
 		apb {
 			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
 
+			hace: crypto@1e6d0000 {
+				compatible = "aspeed,ast2600-hace";
+				reg = <0x1e6d0000 0x200>;
+				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_YCLK>;
+				resets = <&syscon ASPEED_RESET_HACE>;
+			};
+
 			syscon: syscon@1e6e2000 {
 				compatible = "aspeed,ast2600-scu", "syscon", "simple-mfd";
 				reg = <0x1e6e2000 0x1000>;
@@ -351,16 +379,56 @@
 				quality = <100>;
 			};
 
-			xdma: xdma@1e6e7000 {
-				compatible = "aspeed,ast2600-xdma";
-				reg = <0x1e6e7000 0x100>;
-				clocks = <&syscon ASPEED_CLK_GATE_BCLK>;
-				resets = <&syscon ASPEED_RESET_DEV_XDMA>, <&syscon ASPEED_RESET_RC_XDMA>;
-				reset-names = "device", "root-complex";
-				interrupts-extended = <&gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
-						      <&scu_ic0 ASPEED_AST2600_SCU_IC0_PCIE_PERST_LO_TO_HI>;
-				aspeed,pcie-device = "bmc";
-				aspeed,scu = <&syscon>;
+			gfx: display@1e6e6000 {
+				compatible = "aspeed,ast2600-gfx", "syscon";
+				reg = <0x1e6e6000 0x1000>;
+				clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
+				resets = <&syscon ASPEED_RESET_GRAPHICS>;
+				syscon = <&syscon>;
+				status = "disabled";
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			adc0: adc@1e6e9000 {
+				compatible = "aspeed,ast2600-adc0";
+				reg = <0x1e6e9000 0x100>;
+				clocks = <&syscon ASPEED_CLK_APB2>;
+				resets = <&syscon ASPEED_RESET_ADC>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			adc1: adc@1e6e9100 {
+				compatible = "aspeed,ast2600-adc1";
+				reg = <0x1e6e9100 0x100>;
+				clocks = <&syscon ASPEED_CLK_APB2>;
+				resets = <&syscon ASPEED_RESET_ADC>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			sbc: secure-boot-controller@1e6f2000 {
+				compatible = "aspeed,ast2600-sbc";
+				reg = <0x1e6f2000 0x1000>;
+			};
+
+			acry: crypto@1e6fa000 {
+				compatible = "aspeed,ast2600-acry";
+				reg = <0x1e6fa000 0x400>, <0x1e710000 0x1800>;
+				interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_RSACLK>;
+				aspeed,ahbc = <&ahbc>;
+			};
+
+			video: video@1e700000 {
+				compatible = "aspeed,ast2600-video-engine";
+				reg = <0x1e700000 0x1000>;
+				clocks = <&syscon ASPEED_CLK_GATE_VCLK>,
+					 <&syscon ASPEED_CLK_GATE_ECLK>;
+				clock-names = "vclk", "eclk";
+				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
@@ -384,6 +452,7 @@
 				reg = <0x1e780500 0x100>;
 				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&syscon ASPEED_CLK_APB2>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 				bus-frequency = <12000000>;
 				pinctrl-names = "default";
@@ -398,6 +467,7 @@
 				reg = <0x1e780600 0x100>;
 				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&syscon ASPEED_CLK_APB2>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 				bus-frequency = <12000000>;
 				pinctrl-names = "default";
@@ -487,10 +557,20 @@
 				status = "disabled";
 			};
 
+			peci0: peci-controller@1e78b000 {
+				compatible = "aspeed,ast2600-peci";
+				reg = <0x1e78b000 0x100>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_REF0CLK>;
+				resets = <&syscon ASPEED_RESET_PECI>;
+				cmd-timeout-ms = <1000>;
+				clock-frequency = <1000000>;
+				status = "disabled";
+			};
+
 			lpc: lpc@1e789000 {
 				compatible = "aspeed,ast2600-lpc-v2", "simple-mfd", "syscon";
 				reg = <0x1e789000 0x1000>;
-				reg-io-width = <4>;
 
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -500,6 +580,7 @@
 					compatible = "aspeed,ast2500-kcs-bmc-v2";
 					reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
 					interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
 					kcs_chan = <1>;
 					status = "disabled";
 				};
@@ -508,6 +589,7 @@
 					compatible = "aspeed,ast2500-kcs-bmc-v2";
 					reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>;
 					interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
 					status = "disabled";
 				};
 
@@ -515,6 +597,7 @@
 					compatible = "aspeed,ast2500-kcs-bmc-v2";
 					reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>;
 					interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
 					status = "disabled";
 				};
 
@@ -522,6 +605,7 @@
 					compatible = "aspeed,ast2500-kcs-bmc-v2";
 					reg = <0x114 0x1>, <0x118 0x1>, <0x11c 0x1>;
 					interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
 					status = "disabled";
 				};
 
@@ -551,10 +635,17 @@
 					#reset-cells = <1>;
 				};
 
+				uart_routing: uart-routing@98 {
+					compatible = "aspeed,ast2600-uart-routing";
+					reg = <0x98 0x8>;
+					status = "disabled";
+				};
+
 				ibt: ibt@140 {
 					compatible = "aspeed,ast2600-ibt-bmc";
 					reg = <0x140 0x18>;
 					interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
 					status = "disabled";
 				};
 			};
@@ -569,7 +660,7 @@
 				status = "disabled";
 
 				sdhci0: sdhci@1e740100 {
-					compatible = "aspeed,ast2600-sdhci", "sdhci";
+					compatible = "aspeed,ast2600-sdhci";
 					reg = <0x100 0x100>;
 					interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 					sdhci,auto-cmd12;
@@ -578,7 +669,7 @@
 				};
 
 				sdhci1: sdhci@1e740200 {
-					compatible = "aspeed,ast2600-sdhci", "sdhci";
+					compatible = "aspeed,ast2600-sdhci";
 					reg = <0x200 0x100>;
 					interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 					sdhci,auto-cmd12;
@@ -617,6 +708,16 @@
 				status = "disabled";
 			};
 
+			vuart3: serial@1e787800 {
+				compatible = "aspeed,ast2500-vuart";
+				reg = <0x1e787800 0x40>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_APB2>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
 			vuart2: serial@1e788000 {
 				compatible = "aspeed,ast2500-vuart";
 				reg = <0x1e788000 0x40>;
@@ -627,6 +728,16 @@
 				status = "disabled";
 			};
 
+			vuart4: serial@1e788800 {
+				compatible = "aspeed,ast2500-vuart";
+				reg = <0x1e788800 0x40>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_APB2>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
 			uart2: serial@1e78d000 {
 				compatible = "ns16550a";
 				reg = <0x1e78d000 0x20>;
@@ -669,6 +780,62 @@
 				status = "disabled";
 			};
 
+			uart6: serial@1e790000 {
+				compatible = "ns16550a";
+				reg = <0x1e790000 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART6CLK>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart6_default>;
+
+				status = "disabled";
+			};
+
+			uart7: serial@1e790100 {
+				compatible = "ns16550a";
+				reg = <0x1e790100 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART7CLK>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart7_default>;
+
+				status = "disabled";
+			};
+
+			uart8: serial@1e790200 {
+				compatible = "ns16550a";
+				reg = <0x1e790200 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART8CLK>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart8_default>;
+
+				status = "disabled";
+			};
+
+			uart9: serial@1e790300 {
+				compatible = "ns16550a";
+				reg = <0x1e790300 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART9CLK>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart9_default>;
+
+				status = "disabled";
+			};
+
 			i2c: bus@1e78a000 {
 				compatible = "simple-bus";
 				#address-cells = <1>;
@@ -677,22 +844,35 @@
 			};
 
 			fsim0: fsi@1e79b000 {
-				compatible = "aspeed,ast2600-fsi-master", "fsi-master";
+				#interrupt-cells = <1>;
+				compatible = "aspeed,ast2600-fsi-master";
 				reg = <0x1e79b000 0x94>;
 				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_fsi1_default>;
 				clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
+				interrupt-controller;
 				status = "disabled";
 			};
 
 			fsim1: fsi@1e79b100 {
-				compatible = "aspeed,ast2600-fsi-master", "fsi-master";
+				#interrupt-cells = <1>;
+				compatible = "aspeed,ast2600-fsi-master";
 				reg = <0x1e79b100 0x94>;
 				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_fsi2_default>;
 				clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
+				interrupt-controller;
+				status = "disabled";
+			};
+
+			udma: dma-controller@1e79e000 {
+				compatible = "aspeed,ast2600-udma";
+				reg = <0x1e79e000 0x1000>;
+				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+				dma-channels = <28>;
+				#dma-cells = <1>;
 				status = "disabled";
 			};
 		};
@@ -702,10 +882,9 @@
 #include "aspeed-g6-pinctrl.dtsi"
 
 &i2c {
-	i2c0: i2c-bus@80 {
+	i2c0: i2c@80 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x80 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -717,10 +896,9 @@
 		status = "disabled";
 	};
 
-	i2c1: i2c-bus@100 {
+	i2c1: i2c@100 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x100 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -732,10 +910,9 @@
 		status = "disabled";
 	};
 
-	i2c2: i2c-bus@180 {
+	i2c2: i2c@180 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x180 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -747,10 +924,9 @@
 		status = "disabled";
 	};
 
-	i2c3: i2c-bus@200 {
+	i2c3: i2c@200 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x200 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -762,10 +938,9 @@
 		status = "disabled";
 	};
 
-	i2c4: i2c-bus@280 {
+	i2c4: i2c@280 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x280 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -777,10 +952,9 @@
 		status = "disabled";
 	};
 
-	i2c5: i2c-bus@300 {
+	i2c5: i2c@300 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x300 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -792,10 +966,9 @@
 		status = "disabled";
 	};
 
-	i2c6: i2c-bus@380 {
+	i2c6: i2c@380 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x380 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -807,10 +980,9 @@
 		status = "disabled";
 	};
 
-	i2c7: i2c-bus@400 {
+	i2c7: i2c@400 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x400 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -822,10 +994,9 @@
 		status = "disabled";
 	};
 
-	i2c8: i2c-bus@480 {
+	i2c8: i2c@480 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x480 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -837,10 +1008,9 @@
 		status = "disabled";
 	};
 
-	i2c9: i2c-bus@500 {
+	i2c9: i2c@500 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x500 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -852,10 +1022,9 @@
 		status = "disabled";
 	};
 
-	i2c10: i2c-bus@580 {
+	i2c10: i2c@580 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x580 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -867,10 +1036,9 @@
 		status = "disabled";
 	};
 
-	i2c11: i2c-bus@600 {
+	i2c11: i2c@600 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x600 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -882,10 +1050,9 @@
 		status = "disabled";
 	};
 
-	i2c12: i2c-bus@680 {
+	i2c12: i2c@680 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x680 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -897,10 +1064,9 @@
 		status = "disabled";
 	};
 
-	i2c13: i2c-bus@700 {
+	i2c13: i2c@700 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x700 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -912,10 +1078,9 @@
 		status = "disabled";
 	};
 
-	i2c14: i2c-bus@780 {
+	i2c14: i2c@780 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x780 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -927,10 +1092,9 @@
 		status = "disabled";
 	};
 
-	i2c15: i2c-bus@800 {
+	i2c15: i2c@800 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x800 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
diff --git a/arch/arm/boot/dts/ast2400-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/aspeed/ast2400-facebook-netbmc-common.dtsi
index 4e5e786e18b7..4e5e786e18b7 100644
--- a/arch/arm/boot/dts/ast2400-facebook-netbmc-common.dtsi
+++ b/arch/arm/boot/dts/aspeed/ast2400-facebook-netbmc-common.dtsi
diff --git a/arch/arm/boot/dts/ast2500-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/aspeed/ast2500-facebook-netbmc-common.dtsi
index c0c43b8644ee..7f1ae3f4df9d 100644
--- a/arch/arm/boot/dts/ast2500-facebook-netbmc-common.dtsi
+++ b/arch/arm/boot/dts/aspeed/ast2500-facebook-netbmc-common.dtsi
@@ -4,6 +4,10 @@
 #include "aspeed-g5.dtsi"
 
 / {
+	aliases {
+		spi0 = &fmc;
+	};
+
 	memory@80000000 {
 		reg = <0x80000000 0x40000000>;
 	};
diff --git a/arch/arm/boot/dts/ast2600-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi
index 051de5bec345..0ef225acddfc 100644
--- a/arch/arm/boot/dts/ast2600-facebook-netbmc-common.dtsi
+++ b/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi
@@ -25,18 +25,22 @@
 	 * full-duplex SPI transactions are not supported by ASPEED SPI
 	 * Controllers.
 	 */
-	spi_gpio: spi-gpio {
+	spi_gpio: spi {
 		status = "okay";
 		compatible = "spi-gpio";
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		gpio-sck = <&gpio0 ASPEED_GPIO(X, 3) GPIO_ACTIVE_HIGH>;
-		gpio-mosi = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
-		gpio-miso = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>;
+		/*
+		 * chipselect pins are defined in platform .dts files
+		 * separately.
+		 */
+		sck-gpios = <&gpio0 ASPEED_GPIO(X, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>;
 
-		tpmdev@0 {
-			compatible = "tcg,tpm_tis-spi";
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 			spi-max-frequency = <33000000>;
 			reg = <0>;
 		};
@@ -152,18 +156,6 @@
 	status = "okay";
 };
 
-&emmc_controller {
-	status = "okay";
-};
-
-&emmc {
-	status = "okay";
-
-	non-removable;
-	max-frequency = <25000000>;
-	bus-width = <4>;
-};
-
 &rtc {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout-128-data64.dtsi b/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout-128-data64.dtsi
new file mode 100644
index 000000000000..efd92232cda2
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout-128-data64.dtsi
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+partitions {
+	compatible = "fixed-partitions";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	/*
+	 * u-boot partition: 896KB.
+	 */
+	u-boot@0 {
+		reg = <0x0 0xe0000>;
+		label = "u-boot";
+	};
+
+	/*
+	 * u-boot environment variables: 64KB.
+	 */
+	u-boot-env@e0000 {
+		reg = <0xe0000 0x10000>;
+		label = "env";
+	};
+
+	/*
+	 * image metadata partition (64KB), used by Facebook internal
+	 * tools.
+	 */
+	image-meta@f0000 {
+		reg = <0xf0000 0x10000>;
+		label = "meta";
+	};
+
+	/*
+	 * FIT image: 63 MB.
+	 */
+	fit@100000 {
+		reg = <0x100000 0x3f00000>;
+		label = "fit";
+	};
+
+	/*
+	 * "data0" partition (64MB) is used by Facebook BMC platforms as
+	 * persistent data store.
+	 */
+	data0@4000000 {
+		reg = <0x4000000 0x4000000>;
+		label = "data0";
+	};
+
+	/*
+	 * Although the master partition can be created by enabling
+	 * MTD_PARTITIONED_MASTER option, below "flash0" partition is
+	 * explicitly created to avoid breaking legacy applications.
+	 */
+	flash0@0 {
+		reg = <0x0 0x8000000>;
+		label = "flash0";
+	};
+};
diff --git a/arch/arm/boot/dts/facebook-bmc-flash-layout-128.dtsi b/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout-128.dtsi
index 7f3652dea550..7f3652dea550 100644
--- a/arch/arm/boot/dts/facebook-bmc-flash-layout-128.dtsi
+++ b/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout-128.dtsi
diff --git a/arch/arm/boot/dts/facebook-bmc-flash-layout.dtsi b/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout.dtsi
index 87bb8b576250..87bb8b576250 100644
--- a/arch/arm/boot/dts/facebook-bmc-flash-layout.dtsi
+++ b/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout.dtsi
diff --git a/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi b/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi
new file mode 100644
index 000000000000..06fac236773f
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi
@@ -0,0 +1,386 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2023 IBM Corp.
+
+&fsim0 {
+	status = "okay";
+
+	#address-cells = <2>;
+	#size-cells = <0>;
+
+	cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>;
+
+	cfam@0,0 {
+		reg = <0 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <0>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam0_i2c0: i2c-bus@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;	/* OMI01 */
+			};
+
+			cfam0_i2c1: i2c-bus@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;	/* OMI23 */
+			};
+
+			cfam0_i2c10: i2c-bus@a {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam0_i2c11: i2c-bus@b {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam0_i2c12: i2c-bus@c {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <12>;	/* OP4A */
+			};
+
+			cfam0_i2c13: i2c-bus@d {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <13>;	/* OP4B */
+			};
+
+			cfam0_i2c14: i2c-bus@e {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam0_i2c15: i2c-bus@f {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <15>;	/* OP5B */
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam0_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam0_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam0_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam0_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ0: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub0: hub@3400 {
+			#interrupt-cells = <1>;
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+		};
+	};
+};
+
+&fsi_hub0 {
+	cfam@1,0 {
+		reg = <1 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <1>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam1_i2c2: i2c-bus@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;	/* OMI45 */
+			};
+
+			cfam1_i2c3: i2c-bus@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;	/* OMI67 */
+			};
+
+			cfam1_i2c10: i2c-bus@a {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam1_i2c11: i2c-bus@b {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam1_i2c14: i2c-bus@e {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam1_i2c15: i2c-bus@f {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <15>;	/* OP5B */
+			};
+
+			cfam1_i2c16: i2c-bus@10 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <16>;	/* OP6A */
+			};
+
+			cfam1_i2c17: i2c-bus@11 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <17>;	/* OP6B */
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam1_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam1_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam1_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam1_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ1: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub1: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+};
+
+/* Legacy OCC numbering (to get rid of when userspace is fixed) */
+&fsi_occ0 {
+	reg = <1>;
+};
+
+&fsi_occ1 {
+	reg = <2>;
+};
+
+/ {
+	aliases {
+		i2c100 = &cfam0_i2c0;
+		i2c101 = &cfam0_i2c1;
+		i2c110 = &cfam0_i2c10;
+		i2c111 = &cfam0_i2c11;
+		i2c112 = &cfam0_i2c12;
+		i2c113 = &cfam0_i2c13;
+		i2c114 = &cfam0_i2c14;
+		i2c115 = &cfam0_i2c15;
+		i2c202 = &cfam1_i2c2;
+		i2c203 = &cfam1_i2c3;
+		i2c210 = &cfam1_i2c10;
+		i2c211 = &cfam1_i2c11;
+		i2c214 = &cfam1_i2c14;
+		i2c215 = &cfam1_i2c15;
+		i2c216 = &cfam1_i2c16;
+		i2c217 = &cfam1_i2c17;
+
+		spi10 = &cfam0_spi0;
+		spi11 = &cfam0_spi1;
+		spi12 = &cfam0_spi2;
+		spi13 = &cfam0_spi3;
+		spi20 = &cfam1_spi0;
+		spi21 = &cfam1_spi1;
+		spi22 = &cfam1_spi2;
+		spi23 = &cfam1_spi3;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/ibm-power10-quad.dtsi b/arch/arm/boot/dts/aspeed/ibm-power10-quad.dtsi
new file mode 100644
index 000000000000..9501f66d0030
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/ibm-power10-quad.dtsi
@@ -0,0 +1,1309 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2023 IBM Corp.
+
+#include "ibm-power10-dual.dtsi"
+
+&cfam0_i2c0 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom100: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo100: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam0_i2c1 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom101: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo101: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam0_i2c10 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom110: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo110: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam0_i2c11 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom111: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo111: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam0_i2c12 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom112: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo112: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam0_i2c13 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom113: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo113: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam0_i2c14 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom114: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo114: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam0_i2c15 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom115: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo115: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam1_i2c2 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom202: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo202: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam1_i2c3 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom203: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo203: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam1_i2c10 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom210: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo210: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam1_i2c11 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom211: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo211: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam1_i2c14 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom214: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo214: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam1_i2c15 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom215: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo215: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam1_i2c16 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom216: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo216: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam1_i2c17 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom217: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo217: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&fsi_hub0 {
+	cfam@2,0 {
+		reg = <2 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <2>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam2_i2c0: i2c-bus@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;	/* OM01 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom300: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo300: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c1: i2c-bus@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;	/* OM23 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom301: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo301: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c10: i2c-bus@a {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <10>;	/* OP3A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom310: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo310: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c11: i2c-bus@b {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <11>;	/* OP3B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom311: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo311: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c12: i2c-bus@c {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <12>;	/* OP4A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom312: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo312: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c13: i2c-bus@d {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <13>;	/* OP4B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom313: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo313: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c14: i2c-bus@e {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <14>;	/* OP5A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom314: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo314: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c15: i2c-bus@f {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <15>;	/* OP5B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom315: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo315: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam2_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam2_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam2_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam2_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ2: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub2: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+
+	cfam@3,0 {
+		reg = <3 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <3>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam3_i2c2: i2c-bus@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;	/* OM45 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom402: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo402: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c3: i2c-bus@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;	/* OM67 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom403: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo403: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c10: i2c-bus@a {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <10>;	/* OP3A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom410: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo410: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c11: i2c-bus@b {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <11>;	/* OP3B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom411: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo411: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c14: i2c-bus@e {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <14>;	/* OP5A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom414: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo414: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c15: i2c-bus@f {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <15>;	/* OP5B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom415: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo415: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c16: i2c-bus@10 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <16>;	/* OP6A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom416: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo416: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c17: i2c-bus@11 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <17>;	/* OP6B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom417: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo417: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam3_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam3_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam3_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam3_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ3: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub3: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+};
+
+/* Legacy OCC numbering (to get rid of when userspace is fixed) */
+&fsi_occ2 {
+	reg = <3>;
+};
+
+&fsi_occ3 {
+	reg = <4>;
+};
+
+/ {
+	aliases {
+		i2c300 = &cfam2_i2c0;
+		i2c301 = &cfam2_i2c1;
+		i2c310 = &cfam2_i2c10;
+		i2c311 = &cfam2_i2c11;
+		i2c312 = &cfam2_i2c12;
+		i2c313 = &cfam2_i2c13;
+		i2c314 = &cfam2_i2c14;
+		i2c315 = &cfam2_i2c15;
+		i2c402 = &cfam3_i2c2;
+		i2c403 = &cfam3_i2c3;
+		i2c410 = &cfam3_i2c10;
+		i2c411 = &cfam3_i2c11;
+		i2c414 = &cfam3_i2c14;
+		i2c415 = &cfam3_i2c15;
+		i2c416 = &cfam3_i2c16;
+		i2c417 = &cfam3_i2c17;
+
+		sbefifo100 = &sbefifo100;
+		sbefifo101 = &sbefifo101;
+		sbefifo110 = &sbefifo110;
+		sbefifo111 = &sbefifo111;
+		sbefifo112 = &sbefifo112;
+		sbefifo113 = &sbefifo113;
+		sbefifo114 = &sbefifo114;
+		sbefifo115 = &sbefifo115;
+		sbefifo202 = &sbefifo202;
+		sbefifo203 = &sbefifo203;
+		sbefifo210 = &sbefifo210;
+		sbefifo211 = &sbefifo211;
+		sbefifo214 = &sbefifo214;
+		sbefifo215 = &sbefifo215;
+		sbefifo216 = &sbefifo216;
+		sbefifo217 = &sbefifo217;
+		sbefifo300 = &sbefifo300;
+		sbefifo301 = &sbefifo301;
+		sbefifo310 = &sbefifo310;
+		sbefifo311 = &sbefifo311;
+		sbefifo312 = &sbefifo312;
+		sbefifo313 = &sbefifo313;
+		sbefifo314 = &sbefifo314;
+		sbefifo315 = &sbefifo315;
+		sbefifo402 = &sbefifo402;
+		sbefifo403 = &sbefifo403;
+		sbefifo410 = &sbefifo410;
+		sbefifo411 = &sbefifo411;
+		sbefifo414 = &sbefifo414;
+		sbefifo415 = &sbefifo415;
+		sbefifo416 = &sbefifo416;
+		sbefifo417 = &sbefifo417;
+
+		scom100 = &scom100;
+		scom101 = &scom101;
+		scom110 = &scom110;
+		scom111 = &scom111;
+		scom112 = &scom112;
+		scom113 = &scom113;
+		scom114 = &scom114;
+		scom115 = &scom115;
+		scom202 = &scom202;
+		scom203 = &scom203;
+		scom210 = &scom210;
+		scom211 = &scom211;
+		scom214 = &scom214;
+		scom215 = &scom215;
+		scom216 = &scom216;
+		scom217 = &scom217;
+		scom300 = &scom300;
+		scom301 = &scom301;
+		scom310 = &scom310;
+		scom311 = &scom311;
+		scom312 = &scom312;
+		scom313 = &scom313;
+		scom314 = &scom314;
+		scom315 = &scom315;
+		scom402 = &scom402;
+		scom403 = &scom403;
+		scom410 = &scom410;
+		scom411 = &scom411;
+		scom414 = &scom414;
+		scom415 = &scom415;
+		scom416 = &scom416;
+		scom417 = &scom417;
+
+		spi30 = &cfam2_spi0;
+		spi31 = &cfam2_spi1;
+		spi32 = &cfam2_spi2;
+		spi33 = &cfam2_spi3;
+		spi40 = &cfam3_spi0;
+		spi41 = &cfam3_spi1;
+		spi42 = &cfam3_spi2;
+		spi43 = &cfam3_spi3;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/ibm-power11-dual.dtsi b/arch/arm/boot/dts/aspeed/ibm-power11-dual.dtsi
new file mode 100644
index 000000000000..6db02d475380
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/ibm-power11-dual.dtsi
@@ -0,0 +1,779 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2025 IBM Corp.
+
+/ {
+	aliases {
+		i2c100 = &cfam0_i2c0;
+		i2c101 = &cfam0_i2c1;
+		i2c110 = &cfam0_i2c10;
+		i2c111 = &cfam0_i2c11;
+		i2c112 = &cfam0_i2c12;
+		i2c113 = &cfam0_i2c13;
+		i2c114 = &cfam0_i2c14;
+		i2c115 = &cfam0_i2c15;
+		i2c202 = &cfam1_i2c2;
+		i2c203 = &cfam1_i2c3;
+		i2c210 = &cfam1_i2c10;
+		i2c211 = &cfam1_i2c11;
+		i2c214 = &cfam1_i2c14;
+		i2c215 = &cfam1_i2c15;
+		i2c216 = &cfam1_i2c16;
+		i2c217 = &cfam1_i2c17;
+
+		sbefifo100 = &sbefifo100;
+		sbefifo101 = &sbefifo101;
+		sbefifo110 = &sbefifo110;
+		sbefifo111 = &sbefifo111;
+		sbefifo112 = &sbefifo112;
+		sbefifo113 = &sbefifo113;
+		sbefifo114 = &sbefifo114;
+		sbefifo115 = &sbefifo115;
+		sbefifo202 = &sbefifo202;
+		sbefifo203 = &sbefifo203;
+		sbefifo210 = &sbefifo210;
+		sbefifo211 = &sbefifo211;
+		sbefifo214 = &sbefifo214;
+		sbefifo215 = &sbefifo215;
+		sbefifo216 = &sbefifo216;
+		sbefifo217 = &sbefifo217;
+
+		scom100 = &scom100;
+		scom101 = &scom101;
+		scom110 = &scom110;
+		scom111 = &scom111;
+		scom112 = &scom112;
+		scom113 = &scom113;
+		scom114 = &scom114;
+		scom115 = &scom115;
+		scom202 = &scom202;
+		scom203 = &scom203;
+		scom210 = &scom210;
+		scom211 = &scom211;
+		scom214 = &scom214;
+		scom215 = &scom215;
+		scom216 = &scom216;
+		scom217 = &scom217;
+
+		spi10 = &cfam0_spi0;
+		spi11 = &cfam0_spi1;
+		spi12 = &cfam0_spi2;
+		spi13 = &cfam0_spi3;
+		spi20 = &cfam1_spi0;
+		spi21 = &cfam1_spi1;
+		spi22 = &cfam1_spi2;
+		spi23 = &cfam1_spi3;
+	};
+};
+
+&fsim0 {
+	bus-frequency = <100000000>;
+	#address-cells = <2>;
+	#size-cells = <0>;
+	cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	cfam@0,0 {
+		reg = <0 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <0>;
+
+		scom@1000 {
+			compatible = "ibm,p9-scom";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,i2c-fsi";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam0_i2c0: i2c-bus@0 {
+				reg = <0>;	/* OMI01 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom100: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo100: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam0_i2c1: i2c-bus@1 {
+				reg = <1>;	/* OMI23 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom101: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo101: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam0_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom110: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo110: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam0_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom111: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo111: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam0_i2c12: i2c-bus@c {
+				reg = <12>;	/* OP4A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom112: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo112: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam0_i2c13: i2c-bus@d {
+				reg = <13>;	/* OP4B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom113: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo113: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam0_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom114: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo114: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam0_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom115: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo115: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam0_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam0_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam0_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam0_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+
+			occ {
+				compatible = "ibm,p10-occ";
+
+				hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub0: fsi@3400 {
+			compatible = "ibm,p9-fsi-controller";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&fsi_hub0 {
+	cfam@1,0 {
+		reg = <1 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <1>;
+
+		scom@1000 {
+			compatible = "ibm,p9-scom";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,i2c-fsi";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam1_i2c2: i2c-bus@2 {
+				reg = <2>;	/* OMI45 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom202: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo202: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam1_i2c3: i2c-bus@3 {
+				reg = <3>;	/* OMI67 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom203: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo203: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam1_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom210: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo210: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam1_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom211: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo211: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam1_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom214: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo214: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam1_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom215: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo215: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam1_i2c16: i2c-bus@10 {
+				reg = <16>;	/* OP6A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom216: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo216: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam1_i2c17: i2c-bus@11 {
+				reg = <17>;	/* OP6B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom217: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo217: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam1_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam1_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam1_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam1_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+
+			occ {
+				compatible = "ibm,p10-occ";
+
+				hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi@3400 {
+			compatible = "ibm,p9-fsi-controller";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			no-scan-on-init;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/ibm-power11-quad.dtsi b/arch/arm/boot/dts/aspeed/ibm-power11-quad.dtsi
new file mode 100644
index 000000000000..7aa4113d3026
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/ibm-power11-quad.dtsi
@@ -0,0 +1,774 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2024 IBM Corp.
+
+#include "ibm-power11-dual.dtsi"
+
+/ {
+	aliases {
+		i2c300 = &cfam2_i2c0;
+		i2c301 = &cfam2_i2c1;
+		i2c310 = &cfam2_i2c10;
+		i2c311 = &cfam2_i2c11;
+		i2c312 = &cfam2_i2c12;
+		i2c313 = &cfam2_i2c13;
+		i2c314 = &cfam2_i2c14;
+		i2c315 = &cfam2_i2c15;
+		i2c402 = &cfam3_i2c2;
+		i2c403 = &cfam3_i2c3;
+		i2c410 = &cfam3_i2c10;
+		i2c411 = &cfam3_i2c11;
+		i2c414 = &cfam3_i2c14;
+		i2c415 = &cfam3_i2c15;
+		i2c416 = &cfam3_i2c16;
+		i2c417 = &cfam3_i2c17;
+
+		sbefifo300 = &sbefifo300;
+		sbefifo301 = &sbefifo301;
+		sbefifo310 = &sbefifo310;
+		sbefifo311 = &sbefifo311;
+		sbefifo312 = &sbefifo312;
+		sbefifo313 = &sbefifo313;
+		sbefifo314 = &sbefifo314;
+		sbefifo315 = &sbefifo315;
+		sbefifo402 = &sbefifo402;
+		sbefifo403 = &sbefifo403;
+		sbefifo410 = &sbefifo410;
+		sbefifo411 = &sbefifo411;
+		sbefifo414 = &sbefifo414;
+		sbefifo415 = &sbefifo415;
+		sbefifo416 = &sbefifo416;
+		sbefifo417 = &sbefifo417;
+
+		scom300 = &scom300;
+		scom301 = &scom301;
+		scom310 = &scom310;
+		scom311 = &scom311;
+		scom312 = &scom312;
+		scom313 = &scom313;
+		scom314 = &scom314;
+		scom315 = &scom315;
+		scom402 = &scom402;
+		scom403 = &scom403;
+		scom410 = &scom410;
+		scom411 = &scom411;
+		scom414 = &scom414;
+		scom415 = &scom415;
+		scom416 = &scom416;
+		scom417 = &scom417;
+
+		spi30 = &cfam2_spi0;
+		spi31 = &cfam2_spi1;
+		spi32 = &cfam2_spi2;
+		spi33 = &cfam2_spi3;
+		spi40 = &cfam3_spi0;
+		spi41 = &cfam3_spi1;
+		spi42 = &cfam3_spi2;
+		spi43 = &cfam3_spi3;
+	};
+};
+
+&fsi_hub0 {
+	cfam@2,0 {
+		reg = <2 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <2>;
+
+		scom@1000 {
+			compatible = "ibm,p9-scom";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,i2c-fsi";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam2_i2c0: i2c-bus@0 {
+				reg = <0>;	/* OM01 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom300: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo300: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c1: i2c-bus@1 {
+				reg = <1>;	/* OM23 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom301: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo301: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom310: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo310: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom311: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo311: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c12: i2c-bus@c {
+				reg = <12>;	/* OP4A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom312: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo312: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c13: i2c-bus@d {
+				reg = <13>;	/* OP4B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom313: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo313: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom314: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo314: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom315: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo315: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam2_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam2_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam2_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam2_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+
+			occ {
+				compatible = "ibm,p10-occ";
+
+				hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi@3400 {
+			compatible = "ibm,p9-fsi-controller";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			no-scan-on-init;
+		};
+	};
+
+	cfam@3,0 {
+		reg = <3 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <3>;
+
+		scom@1000 {
+			compatible = "ibm,p9-scom";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,i2c-fsi";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam3_i2c2: i2c-bus@2 {
+				reg = <2>;	/* OM45 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom402: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo402: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c3: i2c-bus@3 {
+				reg = <3>;	/* OM67 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom403: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo403: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom410: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo410: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom411: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo411: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom414: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo414: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom415: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo415: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c16: i2c-bus@10 {
+				reg = <16>;	/* OP6A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom416: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo416: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c17: i2c-bus@11 {
+				reg = <17>;	/* OP6B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom417: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo417: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam3_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam3_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam3_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam3_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+
+			occ {
+				compatible = "ibm,p10-occ";
+
+				hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi@3400 {
+			compatible = "ibm,p9-fsi-controller";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			no-scan-on-init;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ibm-power9-dual.dtsi b/arch/arm/boot/dts/aspeed/ibm-power9-dual.dtsi
index a0fa65b44b0f..a0fa65b44b0f 100644
--- a/arch/arm/boot/dts/ibm-power9-dual.dtsi
+++ b/arch/arm/boot/dts/aspeed/ibm-power9-dual.dtsi
diff --git a/arch/arm/boot/dts/openbmc-flash-layout-128.dtsi b/arch/arm/boot/dts/aspeed/openbmc-flash-layout-128.dtsi
index 05101a38c5bd..05101a38c5bd 100644
--- a/arch/arm/boot/dts/openbmc-flash-layout-128.dtsi
+++ b/arch/arm/boot/dts/aspeed/openbmc-flash-layout-128.dtsi
diff --git a/arch/arm/boot/dts/aspeed/openbmc-flash-layout-64-alt.dtsi b/arch/arm/boot/dts/aspeed/openbmc-flash-layout-64-alt.dtsi
new file mode 100644
index 000000000000..650525867561
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/openbmc-flash-layout-64-alt.dtsi
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Bytedance.
+ */
+
+partitions {
+	compatible = "fixed-partitions";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	u-boot@0 {
+		reg = <0x0 0xe0000>; // 896KB
+		label = "alt-u-boot";
+	};
+
+	u-boot-env@e0000 {
+		reg = <0xe0000 0x20000>; // 128KB
+		label = "alt-u-boot-env";
+	};
+
+	kernel@100000 {
+		reg = <0x100000 0x900000>; // 9MB
+		label = "alt-kernel";
+	};
+
+	rofs@a00000 {
+		reg = <0xa00000 0x2000000>; // 32MB
+		label = "alt-rofs";
+	};
+
+	rwfs@6000000 {
+		reg = <0x2a00000 0x1600000>; // 22MB
+		label = "alt-rwfs";
+	};
+};
diff --git a/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi b/arch/arm/boot/dts/aspeed/openbmc-flash-layout-64.dtsi
index 31f59de5190b..7af41361c480 100644
--- a/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi
+++ b/arch/arm/boot/dts/aspeed/openbmc-flash-layout-64.dtsi
@@ -28,7 +28,7 @@ partitions {
 		label = "rofs";
 	};
 
-	rwfs@6000000 {
+	rwfs@2a00000 {
 		reg = <0x2a00000 0x1600000>; // 22MB
 		label = "rwfs";
 	};
diff --git a/arch/arm/boot/dts/openbmc-flash-layout.dtsi b/arch/arm/boot/dts/aspeed/openbmc-flash-layout.dtsi
index 6c26524e93e1..b47e14063c38 100644
--- a/arch/arm/boot/dts/openbmc-flash-layout.dtsi
+++ b/arch/arm/boot/dts/aspeed/openbmc-flash-layout.dtsi
@@ -20,7 +20,7 @@ partitions {
 		label = "kernel";
 	};
 
-	rofs@c0000 {
+	rofs@4c0000 {
 		reg = <0x4c0000 0x1740000>;
 		label = "rofs";
 	};
diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
deleted file mode 100644
index 025a78310e3a..000000000000
--- a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
+++ /dev/null
@@ -1,314 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * at91-sama5d27_wlsom1.dtsi - Device Tree file for SAMA5D27 WLSOM1
- *
- * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
- *
- * Author: Nicolas Ferre <nicolas.ferre@microcihp.com>
- * Author: Eugen Hristev <eugen.hristev@microcihp.com>
- */
-#include "sama5d2.dtsi"
-#include "sama5d2-pinfunc.h"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/mfd/atmel-flexcom.h>
-#include <dt-bindings/pinctrl/at91.h>
-
-/ {
-	model = "Microchip SAMA5D27 WLSOM1";
-	compatible = "microchip,sama5d27-wlsom1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
-
-	aliases {
-		i2c0 = &i2c0;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <24000000>;
-		};
-	};
-};
-
-&flx1 {
-	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
-
-	uart6: serial@200 {
-		pinctrl-0 = <&pinctrl_flx1_default>;
-		pinctrl-names = "default";
-	};
-};
-
-&i2c0 {
-	pinctrl-0 = <&pinctrl_i2c0_default>;
-	pinctrl-1 = <&pinctrl_i2c0_gpio>;
-	pinctrl-names = "default", "gpio";
-	sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
-	scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-};
-
-&i2c1 {
-	dmas = <0>, <0>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c1_default>;
-	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	sda-gpios = <&pioA PIN_PD19 GPIO_ACTIVE_HIGH>;
-	scl-gpios = <&pioA PIN_PD20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-
-	mcp16502@5b {
-		compatible = "microchip,mcp16502";
-		reg = <0x5b>;
-		status = "okay";
-		lpm-gpios = <&pioBU 0 GPIO_ACTIVE_LOW>;
-
-		regulators {
-			vdd_3v3: VDD_IO {
-				regulator-name = "VDD_IO";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3700000>;
-				regulator-initial-mode = <2>;
-				regulator-allowed-modes = <2>, <4>;
-				regulator-always-on;
-
-				regulator-state-standby {
-					regulator-on-in-suspend;
-					regulator-mode = <4>;
-				};
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-mode = <4>;
-				};
-			};
-
-			vddio_ddr: VDD_DDR {
-				regulator-name = "VDD_DDR";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1850000>;
-				regulator-initial-mode = <2>;
-				regulator-allowed-modes = <2>, <4>;
-				regulator-always-on;
-
-				regulator-state-standby {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1200000>;
-					regulator-changeable-in-suspend;
-					regulator-mode = <4>;
-				};
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1200000>;
-					regulator-changeable-in-suspend;
-					regulator-mode = <4>;
-				};
-			};
-
-			vdd_core: VDD_CORE {
-				regulator-name = "VDD_CORE";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1850000>;
-				regulator-initial-mode = <2>;
-				regulator-allowed-modes = <2>, <4>;
-				regulator-always-on;
-
-				regulator-state-standby {
-					regulator-on-in-suspend;
-					regulator-mode = <4>;
-				};
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-mode = <4>;
-				};
-			};
-
-			vdd_ddr: VDD_OTHER {
-				regulator-name = "VDD_OTHER";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-initial-mode = <2>;
-				regulator-allowed-modes = <2>, <4>;
-				regulator-always-on;
-
-				regulator-state-standby {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-					regulator-changeable-in-suspend;
-					regulator-mode = <4>;
-				};
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-					regulator-changeable-in-suspend;
-					regulator-mode = <4>;
-				};
-			};
-
-			LDO1 {
-				regulator-name = "LDO1";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3700000>;
-				regulator-always-on;
-
-				regulator-state-standby {
-					regulator-on-in-suspend;
-				};
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			LDO2 {
-				regulator-name = "LDO2";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3700000>;
-				regulator-always-on;
-
-				regulator-state-standby {
-					regulator-on-in-suspend;
-				};
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-		};
-	};
-};
-
-&macb0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_macb0_default>;
-	phy-mode = "rmii";
-
-	ethernet-phy@0 {
-		reg = <0x0>;
-		interrupt-parent = <&pioA>;
-		interrupts = <PIN_PB24 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_macb0_phy_irq>;
-	};
-};
-
-&pmc {
-	atmel,osc-bypass;
-};
-
-&qspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_qspi1_default>;
-	status = "disabled";
-
-	qspi1_flash: spi_flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <80000000>;
-		spi-rx-bus-width = <4>;
-		spi-tx-bus-width = <4>;
-		m25p,fast-read;
-		status = "disabled";
-
-		at91bootstrap@0 {
-			label = "at91bootstrap";
-			reg = <0x0 0x40000>;
-		};
-
-		bootloader@40000 {
-			label = "bootloader";
-			reg = <0x40000 0xc0000>;
-		};
-
-		bootloaderenvred@100000 {
-			label = "bootloader env redundant";
-			reg = <0x100000 0x40000>;
-		};
-
-		bootloaderenv@140000 {
-			label = "bootloader env";
-			reg = <0x140000 0x40000>;
-		};
-
-		dtb@180000 {
-			label = "device tree";
-			reg = <0x180000 0x80000>;
-		};
-
-		kernel@200000 {
-			label = "kernel";
-			reg = <0x200000 0x600000>;
-		};
-	};
-};
-
-&pioA {
-	pinctrl_flx1_default: flx1_usart_default {
-		pinmux = <PIN_PA24__FLEXCOM1_IO0>,
-			 <PIN_PA23__FLEXCOM1_IO1>,
-			 <PIN_PA25__FLEXCOM1_IO3>,
-			 <PIN_PA26__FLEXCOM1_IO4>;
-		bias-disable;
-	};
-
-	pinctrl_i2c0_default: i2c0_default {
-		pinmux = <PIN_PD21__TWD0>,
-			 <PIN_PD22__TWCK0>;
-		bias-disable;
-	};
-
-	pinctrl_i2c0_gpio: i2c0_gpio {
-		pinmux = <PIN_PD21__GPIO>,
-			 <PIN_PD22__GPIO>;
-		bias-disable;
-	};
-
-	pinctrl_i2c1_default: i2c1_default {
-		pinmux = <PIN_PD19__TWD1>,
-			 <PIN_PD20__TWCK1>;
-		bias-disable;
-	};
-
-	pinctrl_i2c1_gpio: i2c1_gpio {
-		pinmux = <PIN_PD19__GPIO>,
-			 <PIN_PD20__GPIO>;
-		bias-disable;
-	};
-
-	pinctrl_macb0_default: macb0_default {
-		pinmux = <PIN_PB14__GTXCK>,
-			 <PIN_PB15__GTXEN>,
-			 <PIN_PB16__GRXDV>,
-			 <PIN_PB17__GRXER>,
-			 <PIN_PB18__GRX0>,
-			 <PIN_PB19__GRX1>,
-			 <PIN_PB20__GTX0>,
-			 <PIN_PB21__GTX1>,
-			 <PIN_PB22__GMDC>,
-			 <PIN_PB23__GMDIO>;
-		bias-disable;
-	};
-
-	pinctrl_macb0_phy_irq: macb0_phy_irq {
-		pinmux = <PIN_PB24__GPIO>;
-		bias-disable;
-	};
-
-	pinctrl_qspi1_default: qspi1_default {
-		pinmux = <PIN_PB5__QSPI1_SCK>,
-			 <PIN_PB6__QSPI1_CS>,
-			 <PIN_PB7__QSPI1_IO0>,
-			 <PIN_PB8__QSPI1_IO1>,
-			 <PIN_PB9__QSPI1_IO2>,
-			 <PIN_PB10__QSPI1_IO3>;
-		bias-pull-up;
-	};
-};
-
diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts
deleted file mode 100644
index f3d6aaa3a78d..000000000000
--- a/arch/arm/boot/dts/at91-sama7g5ek.dts
+++ /dev/null
@@ -1,689 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- *  at91-sama7g5ek.dts - Device Tree file for SAMA7G5-EK board
- *
- *  Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries
- *
- *  Author: Eugen Hristev <eugen.hristev@microchip.com>
- *  Author: Claudiu Beznea <claudiu.beznea@microchip.com>
- *
- */
-/dts-v1/;
-#include "sama7g5-pinfunc.h"
-#include "sama7g5.dtsi"
-#include <dt-bindings/mfd/atmel-flexcom.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Microchip SAMA7G5-EK";
-	compatible = "microchip,sama7g5ek", "microchip,sama7g5", "microchip,sama7";
-
-	chosen {
-		bootargs = "rw root=/dev/mmcblk1p2 rootfstype=ext4 rootwait";
-		stdout-path = "serial0:115200n8";
-	};
-
-	aliases {
-		serial0 = &uart3;
-		serial1 = &uart4;
-		serial2 = &uart7;
-		serial3 = &uart0;
-		i2c0 = &i2c1;
-		i2c1 = &i2c8;
-		i2c2 = &i2c9;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <24000000>;
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_key_gpio_default>;
-
-		bp1 {
-			label = "PB_USER";
-			gpios = <&pioA PIN_PA12 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_PROG1>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_led_gpio_default>;
-		status = "okay"; /* Conflict with pwm. */
-
-		red_led {
-			label = "red";
-			gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>;
-		};
-
-		green_led {
-			label = "green";
-			gpios = <&pioA PIN_PA13 GPIO_ACTIVE_HIGH>;
-		};
-
-		blue_led {
-			label = "blue";
-			gpios = <&pioA PIN_PD20 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	/* 512 M */
-	memory@60000000 {
-		device_type = "memory";
-		reg = <0x60000000 0x20000000>;
-	};
-
-	sound: sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "sama7g5ek audio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		simple-audio-card,dai-link@0 {
-			reg = <0>;
-			cpu {
-				sound-dai = <&spdiftx>;
-			};
-			codec {
-				sound-dai = <&spdif_out>;
-			};
-		};
-		simple-audio-card,dai-link@1 {
-			reg = <1>;
-			cpu {
-				sound-dai = <&spdifrx>;
-			};
-			codec {
-				sound-dai = <&spdif_in>;
-			};
-		};
-	};
-
-	spdif_in: spdif-in {
-		#sound-dai-cells = <0>;
-		compatible = "linux,spdif-dir";
-	};
-
-	spdif_out: spdif-out {
-		#sound-dai-cells = <0>;
-		compatible = "linux,spdif-dit";
-	};
-};
-
-&cpu0 {
-	cpu-supply = <&vddcpu>;
-};
-
-&dma0 {
-	status = "okay";
-};
-
-&dma1 {
-	status = "okay";
-};
-
-&dma2 {
-	status = "okay";
-};
-
-&flx0 {
-	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
-	status = "disabled";
-
-	uart0: serial@200 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_flx0_default>;
-		status = "disabled";
-	};
-};
-
-&flx1 {
-	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
-	status = "okay";
-
-	i2c1: i2c@600 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c1_default>;
-		i2c-analog-filter;
-		i2c-digital-filter;
-		i2c-digital-filter-width-ns = <35>;
-		status = "okay";
-
-		mcp16502@5b {
-			compatible = "microchip,mcp16502";
-			reg = <0x5b>;
-			status = "okay";
-
-			regulators {
-				vdd_3v3: VDD_IO {
-					regulator-name = "VDD_IO";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <3700000>;
-					regulator-initial-mode = <2>;
-					regulator-allowed-modes = <2>, <4>;
-					regulator-always-on;
-
-					regulator-state-standby {
-						regulator-on-in-suspend;
-						regulator-mode = <4>;
-					};
-
-					regulator-state-mem {
-						regulator-off-in-suspend;
-						regulator-mode = <4>;
-					};
-				};
-
-				vddioddr: VDD_DDR {
-					regulator-name = "VDD_DDR";
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1450000>;
-					regulator-initial-mode = <2>;
-					regulator-allowed-modes = <2>, <4>;
-					regulator-always-on;
-
-					regulator-state-standby {
-						regulator-on-in-suspend;
-						regulator-suspend-microvolt = <1350000>;
-						regulator-mode = <4>;
-					};
-
-					regulator-state-mem {
-						regulator-on-in-suspend;
-						regulator-suspend-microvolt = <1350000>;
-						regulator-mode = <4>;
-					};
-				};
-
-				vddcore: VDD_CORE {
-					regulator-name = "VDD_CORE";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1850000>;
-					regulator-initial-mode = <2>;
-					regulator-allowed-modes = <2>, <4>;
-					regulator-always-on;
-
-					regulator-state-standby {
-						regulator-on-in-suspend;
-						regulator-mode = <4>;
-					};
-
-					regulator-state-mem {
-						regulator-off-in-suspend;
-						regulator-mode = <4>;
-					};
-				};
-
-				vddcpu: VDD_OTHER {
-					regulator-name = "VDD_OTHER";
-					regulator-min-microvolt = <1125000>;
-					regulator-max-microvolt = <1850000>;
-					regulator-initial-mode = <2>;
-					regulator-allowed-modes = <2>, <4>;
-					regulator-ramp-delay = <3125>;
-					regulator-always-on;
-
-					regulator-state-standby {
-						regulator-on-in-suspend;
-						regulator-mode = <4>;
-					};
-
-					regulator-state-mem {
-						regulator-off-in-suspend;
-						regulator-mode = <4>;
-					};
-				};
-
-				vldo1: LDO1 {
-					regulator-name = "LDO1";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <3700000>;
-					regulator-always-on;
-
-					regulator-state-standby {
-						regulator-on-in-suspend;
-					};
-
-					regulator-state-mem {
-						regulator-off-in-suspend;
-					};
-				};
-
-				vldo2: LDO2 {
-					regulator-name = "LDO2";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <3700000>;
-
-					regulator-state-standby {
-						regulator-on-in-suspend;
-					};
-
-					regulator-state-mem {
-						regulator-off-in-suspend;
-					};
-				};
-			};
-		};
-	};
-};
-
-&flx3 {
-	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
-	status = "okay";
-
-	uart3: serial@200 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_flx3_default>;
-		status = "okay";
-	};
-};
-
-&flx4 {
-	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
-	status = "okay";
-
-	uart4: serial@200 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_flx4_default>;
-		status = "okay";
-	};
-};
-
-&flx7 {
-	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
-	status = "okay";
-
-	uart7: serial@200 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_flx7_default>;
-		status = "okay";
-	};
-};
-
-&flx8 {
-	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
-	status = "okay";
-
-	i2c8: i2c@600 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c8_default>;
-		i2c-analog-filter;
-		i2c-digital-filter;
-		i2c-digital-filter-width-ns = <35>;
-		status = "okay";
-	};
-};
-
-&flx9 {
-	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
-	status = "okay";
-
-	i2c9: i2c@600 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c9_default>;
-		i2c-analog-filter;
-		i2c-digital-filter;
-		i2c-digital-filter-width-ns = <35>;
-		status = "okay";
-	};
-};
-
-&flx11 {
-	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
-	status = "okay";
-
-	spi11: spi@400 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_mikrobus1_spi &pinctrl_mikrobus1_spi_cs>;
-		status = "okay";
-	};
-};
-
-&gmac0 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gmac0_default
-		     &pinctrl_gmac0_mdio_default
-		     &pinctrl_gmac0_txck_default
-		     &pinctrl_gmac0_phy_irq>;
-	phy-mode = "rgmii-id";
-	status = "okay";
-
-	ethernet-phy@7 {
-		reg = <0x7>;
-		interrupt-parent = <&pioA>;
-		interrupts = <PIN_PA31 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
-
-&gmac1 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gmac1_default
-		     &pinctrl_gmac1_mdio_default
-		     &pinctrl_gmac1_phy_irq>;
-	phy-mode = "rmii";
-	status = "okay";
-
-	ethernet-phy@0 {
-		reg = <0x0>;
-		interrupt-parent = <&pioA>;
-		interrupts = <PIN_PA21 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
-
-&i2s0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2s0_default>;
-};
-
-&pioA {
-	pinctrl_flx0_default: flx0_default {
-		pinmux = <PIN_PE3__FLEXCOM0_IO0>,
-			 <PIN_PE4__FLEXCOM0_IO1>,
-			 <PIN_PE6__FLEXCOM0_IO3>,
-			 <PIN_PE7__FLEXCOM0_IO4>;
-		bias-disable;
-	};
-
-	pinctrl_flx3_default: flx3_default {
-		pinmux = <PIN_PD16__FLEXCOM3_IO0>,
-			 <PIN_PD17__FLEXCOM3_IO1>;
-		bias-disable;
-	};
-
-	pinctrl_flx4_default: flx4_default {
-		pinmux = <PIN_PD18__FLEXCOM4_IO0>,
-			 <PIN_PD19__FLEXCOM4_IO1>;
-		bias-disable;
-	};
-
-	pinctrl_flx7_default: flx7_default {
-		pinmux = <PIN_PC23__FLEXCOM7_IO0>,
-			 <PIN_PC24__FLEXCOM7_IO1>;
-		bias-disable;
-	};
-
-	pinctrl_gmac0_default: gmac0_default {
-		pinmux = <PIN_PA16__G0_TX0>,
-			 <PIN_PA17__G0_TX1>,
-			 <PIN_PA26__G0_TX2>,
-			 <PIN_PA27__G0_TX3>,
-			 <PIN_PA19__G0_RX0>,
-			 <PIN_PA20__G0_RX1>,
-			 <PIN_PA28__G0_RX2>,
-			 <PIN_PA29__G0_RX3>,
-			 <PIN_PA15__G0_TXEN>,
-			 <PIN_PA30__G0_RXCK>,
-			 <PIN_PA18__G0_RXDV>,
-			 <PIN_PA25__G0_125CK>;
-		slew-rate = <0>;
-		bias-disable;
-	};
-
-	pinctrl_gmac0_mdio_default: gmac0_mdio_default {
-		pinmux = <PIN_PA22__G0_MDC>,
-			 <PIN_PA23__G0_MDIO>;
-		bias-disable;
-	};
-
-	pinctrl_gmac0_txck_default: gmac0_txck_default {
-		pinmux = <PIN_PA24__G0_TXCK>;
-		slew-rate = <0>;
-		bias-pull-up;
-	};
-
-	pinctrl_gmac0_phy_irq: gmac0_phy_irq {
-		pinmux = <PIN_PA31__GPIO>;
-		bias-disable;
-	};
-
-	pinctrl_gmac1_default: gmac1_default {
-		pinmux = <PIN_PD30__G1_TXCK>,
-			 <PIN_PD22__G1_TX0>,
-			 <PIN_PD23__G1_TX1>,
-			 <PIN_PD21__G1_TXEN>,
-			 <PIN_PD25__G1_RX0>,
-			 <PIN_PD26__G1_RX1>,
-			 <PIN_PD27__G1_RXER>,
-			 <PIN_PD24__G1_RXDV>;
-		slew-rate = <0>;
-		bias-disable;
-	};
-
-	pinctrl_gmac1_mdio_default: gmac1_mdio_default {
-		pinmux = <PIN_PD28__G1_MDC>,
-			 <PIN_PD29__G1_MDIO>;
-		bias-disable;
-	};
-
-	pinctrl_gmac1_phy_irq: gmac1_phy_irq {
-		pinmux = <PIN_PA21__GPIO>;
-		bias-disable;
-	};
-
-	pinctrl_i2c1_default: i2c1_default {
-		pinmux = <PIN_PC9__FLEXCOM1_IO0>,
-			 <PIN_PC10__FLEXCOM1_IO1>;
-		bias-disable;
-	};
-
-	pinctrl_i2c8_default: i2c8_default {
-		pinmux = <PIN_PC14__FLEXCOM8_IO0>,
-			 <PIN_PC13__FLEXCOM8_IO1>;
-		bias-disable;
-	};
-
-	pinctrl_i2c9_default: i2c9_default {
-		pinmux = <PIN_PC18__FLEXCOM9_IO0>,
-			 <PIN_PC19__FLEXCOM9_IO1>;
-		bias-disable;
-	};
-
-	pinctrl_i2s0_default: i2s0_default {
-		pinmux = <PIN_PB23__I2SMCC0_CK>,
-			 <PIN_PB24__I2SMCC0_WS>,
-			 <PIN_PB25__I2SMCC0_DOUT1>,
-			 <PIN_PB26__I2SMCC0_DOUT0>,
-			 <PIN_PB27__I2SMCC0_MCK>;
-		bias-disable;
-	};
-
-	pinctrl_key_gpio_default: key_gpio_default {
-		pinmux = <PIN_PA12__GPIO>;
-		bias-pull-up;
-	};
-
-	pinctrl_led_gpio_default: led_gpio_default {
-		pinmux = <PIN_PA13__GPIO>,
-			 <PIN_PB8__GPIO>,
-			 <PIN_PD20__GPIO>;
-		bias-pull-up;
-	};
-
-	pinctrl_mikrobus1_an_default: mikrobus1_an_default {
-		pinmux = <PIN_PD0__GPIO>;
-		bias-disable;
-	};
-
-	pinctrl_mikrobus2_an_default: mikrobus2_an_default {
-		pinmux = <PIN_PD1__GPIO>;
-		bias-disable;
-	};
-
-	pinctrl_mikrobus1_pwm2_default: mikrobus1_pwm2_default {
-		pinmux = <PIN_PA13__PWMH2>;
-		bias-disable;
-	};
-
-	pinctrl_mikrobus2_pwm3_default: mikrobus2_pwm3_default {
-		pinmux = <PIN_PD20__PWMH3>;
-		bias-disable;
-	};
-
-	pinctrl_mikrobus1_spi_cs: mikrobus1_spi_cs {
-		pinmux = <PIN_PB6__FLEXCOM11_IO3>;
-		bias-disable;
-	};
-
-	pinctrl_mikrobus1_spi: mikrobus1_spi {
-		pinmux = <PIN_PB3__FLEXCOM11_IO0>,
-			 <PIN_PB4__FLEXCOM11_IO1>,
-			 <PIN_PB5__FLEXCOM11_IO2>;
-		bias-disable;
-	};
-
-	pinctrl_sdmmc0_default: sdmmc0_default {
-		cmd_data {
-			pinmux = <PIN_PA1__SDMMC0_CMD>,
-				 <PIN_PA3__SDMMC0_DAT0>,
-				 <PIN_PA4__SDMMC0_DAT1>,
-				 <PIN_PA5__SDMMC0_DAT2>,
-				 <PIN_PA6__SDMMC0_DAT3>,
-				 <PIN_PA7__SDMMC0_DAT4>,
-				 <PIN_PA8__SDMMC0_DAT5>,
-				 <PIN_PA9__SDMMC0_DAT6>,
-				 <PIN_PA10__SDMMC0_DAT7>;
-			slew-rate = <0>;
-			bias-pull-up;
-		};
-
-		ck_cd_rstn_vddsel {
-			pinmux = <PIN_PA0__SDMMC0_CK>,
-				 <PIN_PA2__SDMMC0_RSTN>,
-				 <PIN_PA11__SDMMC0_DS>;
-			slew-rate = <0>;
-			bias-pull-up;
-		};
-	};
-
-	pinctrl_sdmmc1_default: sdmmc1_default {
-		cmd_data {
-			pinmux = <PIN_PB29__SDMMC1_CMD>,
-				 <PIN_PB31__SDMMC1_DAT0>,
-				 <PIN_PC0__SDMMC1_DAT1>,
-				 <PIN_PC1__SDMMC1_DAT2>,
-				 <PIN_PC2__SDMMC1_DAT3>;
-			slew-rate = <0>;
-			bias-pull-up;
-		};
-
-		ck_cd_rstn_vddsel {
-			pinmux = <PIN_PB30__SDMMC1_CK>,
-				 <PIN_PB28__SDMMC1_RSTN>,
-				 <PIN_PC5__SDMMC1_1V8SEL>,
-				 <PIN_PC4__SDMMC1_CD>;
-			slew-rate = <0>;
-			bias-pull-up;
-		};
-	};
-
-	pinctrl_sdmmc2_default: sdmmc2_default {
-		cmd_data {
-			pinmux = <PIN_PD3__SDMMC2_CMD>,
-				 <PIN_PD5__SDMMC2_DAT0>,
-				 <PIN_PD6__SDMMC2_DAT1>,
-				 <PIN_PD7__SDMMC2_DAT2>,
-				 <PIN_PD8__SDMMC2_DAT3>;
-			slew-rate = <0>;
-			bias-pull-up;
-		};
-
-		ck {
-			pinmux = <PIN_PD4__SDMMC2_CK>;
-			slew-rate = <0>;
-			bias-pull-up;
-		};
-	};
-
-	pinctrl_spdifrx_default: spdifrx_default {
-		pinmux = <PIN_PB0__SPDIF_RX>;
-		bias-disable;
-	};
-
-	pinctrl_spdiftx_default: spdiftx_default {
-		pinmux = <PIN_PB1__SPDIF_TX>;
-		bias-disable;
-	};
-};
-
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_mikrobus1_pwm2_default &pinctrl_mikrobus2_pwm3_default>;
-	status = "disabled"; /* Conflict with leds. */
-};
-
-&rtt {
-	atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
-};
-
-&sdmmc0 {
-	bus-width = <8>;
-	non-removable;
-	no-1-8-v;
-	sdhci-caps-mask = <0x0 0x00200000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sdmmc0_default>;
-	status = "okay";
-};
-
-&sdmmc1 {
-	bus-width = <4>;
-	no-1-8-v;
-	sdhci-caps-mask = <0x0 0x00200000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sdmmc1_default>;
-	status = "okay";
-};
-
-&sdmmc2 {
-	bus-width = <4>;
-	no-1-8-v;
-	sdhci-caps-mask = <0x0 0x00200000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sdmmc2_default>;
-};
-
-&shdwc {
-	atmel,shdwc-debouncer = <976>;
-	status = "okay";
-
-	input@0 {
-		reg = <0>;
-	};
-};
-
-&spdifrx {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spdifrx_default>;
-	status = "okay";
-};
-
-&spdiftx {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spdiftx_default>;
-	status = "okay";
-};
-
-&trng {
-	status = "okay";
-};
-
-&vddout25 {
-	vin-supply = <&vdd_3v3>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/axis/Makefile b/arch/arm/boot/dts/axis/Makefile
new file mode 100644
index 000000000000..2cab41451281
--- /dev/null
+++ b/arch/arm/boot/dts/axis/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_MACH_ARTPEC6) += \
+	artpec6-devboard.dtb
+dtb-$(CONFIG_MACH_ARTPEC6) += \
+	artpec6-devboard.dtb
diff --git a/arch/arm/boot/dts/artpec6-devboard.dts b/arch/arm/boot/dts/axis/artpec6-devboard.dts
index d20d95359b28..042a9cc920c6 100644
--- a/arch/arm/boot/dts/artpec6-devboard.dts
+++ b/arch/arm/boot/dts/axis/artpec6-devboard.dts
@@ -1,10 +1,5 @@
-/*
- * Axis ARTPEC-6 development board.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Axis ARTPEC-6 development board.
 
 /dts-v1/;
 #include "artpec6.dtsi"
diff --git a/arch/arm/boot/dts/artpec6.dtsi b/arch/arm/boot/dts/axis/artpec6.dtsi
index 037157e6c5ee..037157e6c5ee 100644
--- a/arch/arm/boot/dts/artpec6.dtsi
+++ b/arch/arm/boot/dts/axis/artpec6.dtsi
diff --git a/arch/arm/boot/dts/bcm21664-garnet.dts b/arch/arm/boot/dts/bcm21664-garnet.dts
deleted file mode 100644
index be468f4adc37..000000000000
--- a/arch/arm/boot/dts/bcm21664-garnet.dts
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * Copyright (C) 2014 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-
-#include "bcm21664.dtsi"
-
-/ {
-	model = "BCM21664 Garnet board";
-	compatible = "brcm,bcm21664-garnet", "brcm,bcm21664";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>; /* 1 GB */
-	};
-
-	uart@3e000000 {
-		status = "okay";
-	};
-
-	sdio1: sdio@3f180000 {
-		max-frequency = <48000000>;
-		status = "okay";
-	};
-
-	sdio2: sdio@3f190000 {
-		non-removable;
-		max-frequency = <48000000>;
-		status = "okay";
-	};
-
-	sdio4: sdio@3f1b0000 {
-		max-frequency = <48000000>;
-		cd-gpios = <&gpio 91 GPIO_ACTIVE_LOW>;
-		status = "okay";
-	};
-
-	usbotg: usb@3f120000 {
-		status = "okay";
-	};
-
-	usbphy: usb-phy@3f130000 {
-		status = "okay";
-	};
-};
diff --git a/arch/arm/boot/dts/bcm21664.dtsi b/arch/arm/boot/dts/bcm21664.dtsi
deleted file mode 100644
index cc58f2b926b9..000000000000
--- a/arch/arm/boot/dts/bcm21664.dtsi
+++ /dev/null
@@ -1,357 +0,0 @@
-/*
- * Copyright (C) 2014 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-#include "dt-bindings/clock/bcm21664.h"
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "BCM21664 SoC";
-	compatible = "brcm,bcm21664";
-	interrupt-parent = <&gic>;
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			enable-method = "brcm,bcm11351-cpu-method";
-			secondary-boot-reg = <0x35004178>;
-			reg = <1>;
-		};
-	};
-
-	gic: interrupt-controller@3ff00100 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0x3ff01000 0x1000>,
-		      <0x3ff00100 0x100>;
-	};
-
-	smc@3404e000 {
-		compatible = "brcm,bcm21664-smc", "brcm,kona-smc";
-		reg = <0x3404e000 0x400>; /* 1 KiB in SRAM */
-	};
-
-	uart@3e000000 {
-		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
-		reg = <0x3e000000 0x118>;
-		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>;
-		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-	};
-
-	uart@3e001000 {
-		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
-		reg = <0x3e001000 0x118>;
-		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>;
-		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-	};
-
-	uart@3e002000 {
-		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
-		reg = <0x3e002000 0x118>;
-		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>;
-		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-	};
-
-	L2: cache-controller@3ff20000 {
-		compatible = "arm,pl310-cache";
-		reg = <0x3ff20000 0x1000>;
-		cache-unified;
-		cache-level = <2>;
-	};
-
-	brcm,resetmgr@35001f00 {
-		compatible = "brcm,bcm21664-resetmgr";
-		reg = <0x35001f00 0x24>;
-	};
-
-	timer@35006000 {
-		compatible = "brcm,kona-timer";
-		reg = <0x35006000 0x1c>;
-		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>;
-	};
-
-	gpio: gpio@35003000 {
-		compatible = "brcm,bcm21664-gpio", "brcm,kona-gpio";
-		reg = <0x35003000 0x524>;
-		interrupts =
-		       <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		#interrupt-cells = <2>;
-		gpio-controller;
-		interrupt-controller;
-	};
-
-	sdio1: sdio@3f180000 {
-		compatible = "brcm,kona-sdhci";
-		reg = <0x3f180000 0x801c>;
-		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>;
-		status = "disabled";
-	};
-
-	sdio2: sdio@3f190000 {
-		compatible = "brcm,kona-sdhci";
-		reg = <0x3f190000 0x801c>;
-		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>;
-		status = "disabled";
-	};
-
-	sdio3: sdio@3f1a0000 {
-		compatible = "brcm,kona-sdhci";
-		reg = <0x3f1a0000 0x801c>;
-		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>;
-		status = "disabled";
-	};
-
-	sdio4: sdio@3f1b0000 {
-		compatible = "brcm,kona-sdhci";
-		reg = <0x3f1b0000 0x801c>;
-		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>;
-		status = "disabled";
-	};
-
-	i2c@3e016000 {
-		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
-		reg = <0x3e016000 0x70>;
-		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>;
-		status = "disabled";
-	};
-
-	i2c@3e017000 {
-		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
-		reg = <0x3e017000 0x70>;
-		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>;
-		status = "disabled";
-	};
-
-	i2c@3e018000 {
-		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
-		reg = <0x3e018000 0x70>;
-		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>;
-		status = "disabled";
-	};
-
-	i2c@3e01c000 {
-		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
-		reg = <0x3e01c000 0x70>;
-		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>;
-		status = "disabled";
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/*
-		 * Fixed clocks are defined before CCUs whose
-		 * clocks may depend on them.
-		 */
-
-		ref_32k_clk: ref_32k {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-		};
-
-		bbl_32k_clk: bbl_32k {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-		};
-
-		ref_13m_clk: ref_13m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
-		};
-
-		var_13m_clk: var_13m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
-		};
-
-		dft_19_5m_clk: dft_19_5m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <19500000>;
-		};
-
-		ref_crystal_clk: ref_crystal {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <26000000>;
-		};
-
-		ref_52m_clk: ref_52m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <52000000>;
-		};
-
-		var_52m_clk: var_52m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <52000000>;
-		};
-
-		usb_otg_ahb_clk: usb_otg_ahb {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <52000000>;
-		};
-
-		ref_96m_clk: ref_96m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <96000000>;
-		};
-
-		var_96m_clk: var_96m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <96000000>;
-		};
-
-		ref_104m_clk: ref_104m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <104000000>;
-		};
-
-		var_104m_clk: var_104m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <104000000>;
-		};
-
-		ref_156m_clk: ref_156m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <156000000>;
-		};
-
-		var_156m_clk: var_156m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <156000000>;
-		};
-
-		root_ccu: root_ccu@35001000 {
-			compatible = BCM21664_DT_ROOT_CCU_COMPAT;
-			reg = <0x35001000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "frac_1m";
-		};
-
-		aon_ccu: aon_ccu@35002000 {
-			compatible = BCM21664_DT_AON_CCU_COMPAT;
-			reg = <0x35002000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "hub_timer";
-		};
-
-		master_ccu: master_ccu@3f001000 {
-			compatible = BCM21664_DT_MASTER_CCU_COMPAT;
-			reg = <0x3f001000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "sdio1",
-					     "sdio2",
-					     "sdio3",
-					     "sdio4",
-					     "sdio1_sleep",
-					     "sdio2_sleep",
-					     "sdio3_sleep",
-					     "sdio4_sleep";
-		};
-
-		slave_ccu: slave_ccu@3e011000 {
-			compatible = BCM21664_DT_SLAVE_CCU_COMPAT;
-			reg = <0x3e011000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "uartb",
-					     "uartb2",
-					     "uartb3",
-					     "bsc1",
-					     "bsc2",
-					     "bsc3",
-					     "bsc4";
-		};
-	};
-
-	usbotg: usb@3f120000 {
-		compatible = "snps,dwc2";
-		reg = <0x3f120000 0x10000>;
-		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&usb_otg_ahb_clk>;
-		clock-names = "otg";
-		phys = <&usbphy>;
-		phy-names = "usb2-phy";
-		status = "disabled";
-	};
-
-	usbphy: usb-phy@3f130000 {
-		compatible = "brcm,kona-usb2-phy";
-		reg = <0x3f130000 0x28>;
-		#phy-cells = <0>;
-		status = "disabled";
-	};
-};
diff --git a/arch/arm/boot/dts/bcm23550.dtsi b/arch/arm/boot/dts/bcm23550.dtsi
deleted file mode 100644
index a36c9b1d23c8..000000000000
--- a/arch/arm/boot/dts/bcm23550.dtsi
+++ /dev/null
@@ -1,415 +0,0 @@
-/*
- *  BSD LICENSE
- *
- *  Copyright(c) 2016 Broadcom.  All rights reserved.
- *
- *  Redistribution and use in source and binary forms, with or without
- *  modification, are permitted provided that the following conditions
- *  are met:
- *
- *    * Redistributions of source code must retain the above copyright
- *      notice, this list of conditions and the following disclaimer.
- *    * Redistributions in binary form must reproduce the above copyright
- *      notice, this list of conditions and the following disclaimer in
- *      the documentation and/or other materials provided with the
- *      distribution.
- *    * Neither the name of Broadcom Corporation nor the names of its
- *      contributors may be used to endorse or promote products derived
- *      from this software without specific prior written permission.
- *
- *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/* BCM23550 and BCM21664 have almost identical clocks */
-#include "dt-bindings/clock/bcm21664.h"
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "BCM23550 SoC";
-	compatible = "brcm,bcm23550";
-	interrupt-parent = <&gic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0>;
-			clock-frequency = <1000000000>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			enable-method = "brcm,bcm23550";
-			secondary-boot-reg = <0x35004178>;
-			reg = <1>;
-			clock-frequency = <1000000000>;
-		};
-
-		cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			enable-method = "brcm,bcm23550";
-			secondary-boot-reg = <0x35004178>;
-			reg = <2>;
-			clock-frequency = <1000000000>;
-		};
-
-		cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			enable-method = "brcm,bcm23550";
-			secondary-boot-reg = <0x35004178>;
-			reg = <3>;
-			clock-frequency = <1000000000>;
-		};
-	};
-
-	/* Hub bus */
-	hub@34000000 {
-		compatible = "simple-bus";
-		ranges = <0 0x34000000 0x102f83ac>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		smc@4e000 {
-			compatible = "brcm,bcm23550-smc", "brcm,kona-smc";
-			reg = <0x0004e000 0x400>; /* 1 KiB in SRAM */
-		};
-
-		resetmgr: reset-controller@1001f00 {
-			compatible = "brcm,bcm21664-resetmgr";
-			reg = <0x01001f00 0x24>;
-		};
-
-		gpio: gpio@1003000 {
-			compatible = "brcm,bcm23550-gpio", "brcm,kona-gpio";
-			reg = <0x01003000 0x524>;
-			interrupts =
-			       <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH
-				GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH
-				GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH
-				GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			#interrupt-cells = <2>;
-			gpio-controller;
-			interrupt-controller;
-		};
-
-		timer@1006000 {
-			compatible = "brcm,kona-timer";
-			reg = <0x01006000 0x1c>;
-			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>;
-		};
-	};
-
-	/* Slaves bus */
-	slaves@3e000000 {
-		compatible = "simple-bus";
-		ranges = <0 0x3e000000 0x0001c070>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		uartb: serial@0 {
-			compatible = "snps,dw-apb-uart";
-			status = "disabled";
-			reg = <0x00000000 0x118>;
-			clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>;
-			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-		};
-
-		uartb2: serial@1000 {
-			compatible = "snps,dw-apb-uart";
-			status = "disabled";
-			reg = <0x00001000 0x118>;
-			clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>;
-			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-		};
-
-		uartb3: serial@2000 {
-			compatible = "snps,dw-apb-uart";
-			status = "disabled";
-			reg = <0x00002000 0x118>;
-			clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>;
-			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-		};
-
-		bsc1: i2c@16000 {
-			compatible = "brcm,kona-i2c";
-			reg = <0x00016000 0x70>;
-			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>;
-			status = "disabled";
-		};
-
-		bsc2: i2c@17000 {
-			compatible = "brcm,kona-i2c";
-			reg = <0x00017000 0x70>;
-			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>;
-			status = "disabled";
-		};
-
-		bsc3: i2c@18000 {
-			compatible = "brcm,kona-i2c";
-			reg = <0x00018000 0x70>;
-			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>;
-			status = "disabled";
-		};
-
-		bsc4: i2c@1c000 {
-			compatible = "brcm,kona-i2c";
-			reg = <0x0001c000 0x70>;
-			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>;
-			status = "disabled";
-		};
-	};
-
-	/* Apps bus */
-	apps@3e300000 {
-		compatible = "simple-bus";
-		ranges = <0 0x3e300000 0x01b77000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		usbotg: usb@e20000 {
-			compatible = "snps,dwc2";
-			reg = <0x00e20000 0x10000>;
-			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&usb_otg_ahb_clk>;
-			clock-names = "otg";
-			phys = <&usbphy>;
-			phy-names = "usb2-phy";
-			status = "disabled";
-		};
-
-		usbphy: usb-phy@e30000 {
-			compatible = "brcm,kona-usb2-phy";
-			reg = <0x00e30000 0x28>;
-			#phy-cells = <0>;
-			status = "disabled";
-		};
-
-		sdio1: sdio@e80000 {
-			compatible = "brcm,kona-sdhci";
-			reg = <0x00e80000 0x801c>;
-			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>;
-			status = "disabled";
-		};
-
-		sdio2: sdio@e90000 {
-			compatible = "brcm,kona-sdhci";
-			reg = <0x00e90000 0x801c>;
-			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>;
-			status = "disabled";
-		};
-
-		sdio3: sdio@ea0000 {
-			compatible = "brcm,kona-sdhci";
-			reg = <0x00ea0000 0x801c>;
-			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>;
-			status = "disabled";
-		};
-
-		sdio4: sdio@eb0000 {
-			compatible = "brcm,kona-sdhci";
-			reg = <0x00eb0000 0x801c>;
-			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>;
-			status = "disabled";
-		};
-
-		cdc: cdc@1b0e000 {
-			compatible = "brcm,bcm23550-cdc";
-			reg = <0x01b0e000 0x78>;
-		};
-
-		gic: interrupt-controller@1b21000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			interrupt-controller;
-			reg = <0x01b21000 0x1000>,
-			      <0x01b22000 0x1000>;
-		};
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/*
-		 * Fixed clocks are defined before CCUs whose
-		 * clocks may depend on them.
-		 */
-
-		ref_32k_clk: ref_32k {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-		};
-
-		bbl_32k_clk: bbl_32k {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-		};
-
-		ref_13m_clk: ref_13m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
-		};
-
-		var_13m_clk: var_13m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
-		};
-
-		dft_19_5m_clk: dft_19_5m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <19500000>;
-		};
-
-		ref_crystal_clk: ref_crystal {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <26000000>;
-		};
-
-		ref_52m_clk: ref_52m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <52000000>;
-		};
-
-		var_52m_clk: var_52m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <52000000>;
-		};
-
-		usb_otg_ahb_clk: usb_otg_ahb {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <52000000>;
-		};
-
-		ref_96m_clk: ref_96m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <96000000>;
-		};
-
-		var_96m_clk: var_96m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <96000000>;
-		};
-
-		ref_104m_clk: ref_104m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <104000000>;
-		};
-
-		var_104m_clk: var_104m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <104000000>;
-		};
-
-		ref_156m_clk: ref_156m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <156000000>;
-		};
-
-		var_156m_clk: var_156m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <156000000>;
-		};
-
-		root_ccu: root_ccu@35001000 {
-			compatible = BCM21664_DT_ROOT_CCU_COMPAT;
-			reg = <0x35001000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "frac_1m";
-		};
-
-		aon_ccu: aon_ccu@35002000 {
-			compatible = BCM21664_DT_AON_CCU_COMPAT;
-			reg = <0x35002000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "hub_timer";
-		};
-
-		slave_ccu: slave_ccu@3e011000 {
-			compatible = BCM21664_DT_SLAVE_CCU_COMPAT;
-			reg = <0x3e011000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "uartb",
-					     "uartb2",
-					     "uartb3",
-					     "bsc1",
-					     "bsc2",
-					     "bsc3",
-					     "bsc4";
-		};
-
-		master_ccu: master_ccu@3f001000 {
-			compatible = BCM21664_DT_MASTER_CCU_COMPAT;
-			reg = <0x3f001000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "sdio1",
-					     "sdio2",
-					     "sdio3",
-					     "sdio4",
-					     "sdio1_sleep",
-					     "sdio2_sleep",
-					     "sdio3_sleep",
-					     "sdio4_sleep";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
deleted file mode 100644
index 72ce80fbf266..000000000000
--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+++ /dev/null
@@ -1,262 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-#include "bcm2711.dtsi"
-#include "bcm2711-rpi.dtsi"
-#include "bcm283x-rpi-usb-peripheral.dtsi"
-
-/ {
-	compatible = "raspberrypi,4-model-b", "brcm,bcm2711";
-	model = "Raspberry Pi 4 Model B";
-
-	chosen {
-		/* 8250 auxiliary UART instead of pl011 */
-		stdout-path = "serial1:115200n8";
-	};
-
-	leds {
-		led-act {
-			gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-pwr {
-			label = "PWR";
-			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-			linux,default-trigger = "default-on";
-		};
-	};
-
-	wifi_pwrseq: wifi-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
-	};
-
-	sd_io_1v8_reg: sd_io_1v8_reg {
-		compatible = "regulator-gpio";
-		regulator-name = "vdd-sd-io";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-		regulator-settling-time-us = <5000>;
-		gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>;
-		states = <1800000 0x1>,
-			 <3300000 0x0>;
-		status = "okay";
-	};
-
-	sd_vcc_reg: sd_vcc_reg {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc-sd";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		enable-active-high;
-		gpio = <&expgpio 6 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&ddc0 {
-	status = "okay";
-};
-
-&ddc1 {
-	status = "okay";
-};
-
-&expgpio {
-	gpio-line-names = "BT_ON",
-			  "WL_ON",
-			  "PWR_LED_OFF",
-			  "GLOBAL_RESET",
-			  "VDD_SD_IO_SEL",
-			  "CAM_GPIO",
-			  "SD_PWR_ON",
-			  "";
-};
-
-&gpio {
-	/*
-	 * Parts taken from rpi_SCH_4b_4p0_reduced.pdf and
-	 * the official GPU firmware DT blob.
-	 *
-	 * Legend:
-	 * "FOO" = GPIO line named "FOO" on the schematic
-	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
-	 */
-	gpio-line-names = "ID_SDA",
-			  "ID_SCL",
-			  "SDA1",
-			  "SCL1",
-			  "GPIO_GCLK",
-			  "GPIO5",
-			  "GPIO6",
-			  "SPI_CE1_N",
-			  "SPI_CE0_N",
-			  "SPI_MISO",
-			  "SPI_MOSI",
-			  "SPI_SCLK",
-			  "GPIO12",
-			  "GPIO13",
-			  /* Serial port */
-			  "TXD1",
-			  "RXD1",
-			  "GPIO16",
-			  "GPIO17",
-			  "GPIO18",
-			  "GPIO19",
-			  "GPIO20",
-			  "GPIO21",
-			  "GPIO22",
-			  "GPIO23",
-			  "GPIO24",
-			  "GPIO25",
-			  "GPIO26",
-			  "GPIO27",
-			  "RGMII_MDIO",
-			  "RGMIO_MDC",
-			  /* Used by BT module */
-			  "CTS0",
-			  "RTS0",
-			  "TXD0",
-			  "RXD0",
-			  /* Used by Wifi */
-			  "SD1_CLK",
-			  "SD1_CMD",
-			  "SD1_DATA0",
-			  "SD1_DATA1",
-			  "SD1_DATA2",
-			  "SD1_DATA3",
-			  /* Shared with SPI flash */
-			  "PWM0_MISO",
-			  "PWM1_MOSI",
-			  "STATUS_LED_G_CLK",
-			  "SPIFLASH_CE_N",
-			  "SDA0",
-			  "SCL0",
-			  "RGMII_RXCLK",
-			  "RGMII_RXCTL",
-			  "RGMII_RXD0",
-			  "RGMII_RXD1",
-			  "RGMII_RXD2",
-			  "RGMII_RXD3",
-			  "RGMII_TXCLK",
-			  "RGMII_TXCTL",
-			  "RGMII_TXD0",
-			  "RGMII_TXD1",
-			  "RGMII_TXD2",
-			  "RGMII_TXD3";
-};
-
-&hdmi0 {
-	status = "okay";
-};
-
-&hdmi1 {
-	status = "okay";
-};
-
-&pixelvalve0 {
-	status = "okay";
-};
-
-&pixelvalve1 {
-	status = "okay";
-};
-
-&pixelvalve2 {
-	status = "okay";
-};
-
-&pixelvalve4 {
-	status = "okay";
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm1_0_gpio40 &pwm1_1_gpio41>;
-	status = "okay";
-};
-
-/* SDHCI is used to control the SDIO for wireless */
-&sdhci {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_gpio34>;
-	bus-width = <4>;
-	non-removable;
-	mmc-pwrseq = <&wifi_pwrseq>;
-	status = "okay";
-
-	brcmf: wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-	};
-};
-
-/* EMMC2 is used to drive the SD card */
-&emmc2 {
-	vqmmc-supply = <&sd_io_1v8_reg>;
-	vmmc-supply = <&sd_vcc_reg>;
-	broken-cd;
-	status = "okay";
-};
-
-&genet {
-	phy-handle = <&phy1>;
-	phy-mode = "rgmii-rxid";
-	status = "okay";
-};
-
-&genet_mdio {
-	phy1: ethernet-phy@1 {
-		/* No PHY interrupt */
-		reg = <0x1>;
-	};
-};
-
-&pcie0 {
-	pci@0,0 {
-		device_type = "pci";
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges;
-
-		reg = <0 0 0 0 0>;
-
-		usb@0,0 {
-			reg = <0 0 0 0 0>;
-			resets = <&reset RASPBERRYPI_FIRMWARE_RESET_ID_USB>;
-		};
-	};
-};
-
-/* uart0 communicates with the BT module */
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>;
-	uart-has-rtscts;
-	status = "okay";
-
-	bluetooth {
-		compatible = "brcm,bcm43438-bt";
-		max-speed = <2000000>;
-		shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-/* uart1 is mapped to the pin header */
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_gpio14>;
-	status = "okay";
-};
-
-&vc4 {
-	status = "okay";
-};
-
-&vec {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/bcm2711-rpi.dtsi b/arch/arm/boot/dts/bcm2711-rpi.dtsi
deleted file mode 100644
index ca266c5d9f9b..000000000000
--- a/arch/arm/boot/dts/bcm2711-rpi.dtsi
+++ /dev/null
@@ -1,74 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "bcm2835-rpi.dtsi"
-
-#include <dt-bindings/reset/raspberrypi,firmware-reset.h>
-
-/ {
-	/* Will be filled by the bootloader */
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0 0>;
-	};
-
-	aliases {
-		emmc2bus = &emmc2bus;
-		ethernet0 = &genet;
-		pcie0 = &pcie0;
-		blconfig = &blconfig;
-	};
-};
-
-&firmware {
-	firmware_clocks: clocks {
-		compatible = "raspberrypi,firmware-clocks";
-		#clock-cells = <1>;
-	};
-
-	expgpio: gpio {
-		compatible = "raspberrypi,firmware-gpio";
-		gpio-controller;
-		#gpio-cells = <2>;
-		status = "okay";
-	};
-
-	reset: reset {
-		compatible = "raspberrypi,firmware-reset";
-		#reset-cells = <1>;
-	};
-};
-
-&hdmi0 {
-	clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>;
-	clock-names = "hdmi", "bvb", "audio", "cec";
-	wifi-2.4ghz-coexistence;
-};
-
-&hdmi1 {
-	clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>;
-	clock-names = "hdmi", "bvb", "audio", "cec";
-	wifi-2.4ghz-coexistence;
-};
-
-&hvs {
-	clocks = <&firmware_clocks 4>;
-};
-
-&rmem {
-	/*
-	 * RPi4's co-processor will copy the board's bootloader configuration
-	 * into memory for the OS to consume. It'll also update this node with
-	 * its placement information.
-	 */
-	blconfig: nvram@0 {
-		compatible = "raspberrypi,bootloader-config", "nvmem-rmem";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x0 0x0 0x0>;
-		no-map;
-		status = "disabled";
-	};
-};
-
-&vchiq {
-	interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-};
diff --git a/arch/arm/boot/dts/bcm28155-ap.dts b/arch/arm/boot/dts/bcm28155-ap.dts
deleted file mode 100644
index ead6e9804dbf..000000000000
--- a/arch/arm/boot/dts/bcm28155-ap.dts
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * Copyright (C) 2013 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-
-#include "bcm11351.dtsi"
-
-/ {
-	model = "BCM28155 AP board";
-	compatible = "brcm,bcm28155-ap", "brcm,bcm11351";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>; /* 1 GB */
-	};
-
-	uart@3e000000 {
-		status = "okay";
-	};
-
-	i2c@3e016000 {
-		status="okay";
-		clock-frequency = <400000>;
-	};
-
-	i2c@3e017000 {
-		status="okay";
-		clock-frequency = <400000>;
-	};
-
-	i2c@3e018000 {
-		status="okay";
-		clock-frequency = <400000>;
-	};
-
-	i2c@3500d000 {
-		status="okay";
-		clock-frequency = <100000>;
-
-		pmu: pmu@8 {
-			reg = <0x08>;
-		};
-	};
-
-	sdio2: sdio@3f190000 {
-		non-removable;
-		max-frequency = <48000000>;
-		vmmc-supply = <&camldo1_reg>;
-		vqmmc-supply = <&iosr1_reg>;
-		status = "okay";
-	};
-
-	sdio4: sdio@3f1b0000 {
-		max-frequency = <48000000>;
-		cd-gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-		vmmc-supply = <&sdldo_reg>;
-		vqmmc-supply = <&sdxldo_reg>;
-		status = "okay";
-	};
-
-	pwm: pwm@3e01a000 {
-		status = "okay";
-	};
-
-	usbotg: usb@3f120000 {
-		vusb_d-supply = <&usbldo_reg>;
-		vusb_a-supply = <&iosr1_reg>;
-		status = "okay";
-	};
-
-	usbphy: usb-phy@3f130000 {
-		status = "okay";
-	};
-};
-
-#include "bcm59056.dtsi"
-
-&pmu {
-	compatible = "brcm,bcm59056";
-	interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
-	regulators {
-		camldo1_reg: camldo1 {
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		sdldo_reg: sdldo {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-		};
-
-		sdxldo_reg: sdxldo {
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		usbldo_reg: usbldo {
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		iosr1_reg: iosr1 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts
deleted file mode 100644
index 1b63d6b19750..000000000000
--- a/arch/arm/boot/dts/bcm2835-rpi-b.dts
+++ /dev/null
@@ -1,118 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-#include "bcm2835.dtsi"
-#include "bcm2835-rpi.dtsi"
-#include "bcm283x-rpi-smsc9512.dtsi"
-#include "bcm283x-rpi-usb-host.dtsi"
-
-/ {
-	compatible = "raspberrypi,model-b", "brcm,bcm2835";
-	model = "Raspberry Pi Model B";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0x10000000>;
-	};
-
-	leds {
-		led-act {
-			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&gpio {
-	/*
-	 * Taken from Raspberry-Pi-Rev-1.0-Model-AB-Schematics.pdf
-	 * RPI00021 sheet 02
-	 *
-	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
-	 * "FOO" = GPIO line named "FOO" on the schematic
-	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
-	 */
-	gpio-line-names = "SDA0",
-			  "SCL0",
-			  "SDA1",
-			  "SCL1",
-			  "GPIO_GCLK",
-			  "CAM_GPIO1",
-			  "LAN_RUN",
-			  "SPI_CE1_N",
-			  "SPI_CE0_N",
-			  "SPI_MISO",
-			  "SPI_MOSI",
-			  "SPI_SCLK",
-			  "NC", /* GPIO12 */
-			  "NC", /* GPIO13 */
-			  /* Serial port */
-			  "TXD0",
-			  "RXD0",
-			  "STATUS_LED_N",
-			  "GPIO17",
-			  "GPIO18",
-			  "NC", /* GPIO19 */
-			  "NC", /* GPIO20 */
-			  "GPIO21",
-			  "GPIO22",
-			  "GPIO23",
-			  "GPIO24",
-			  "GPIO25",
-			  "NC", /* GPIO26 */
-			  "CAM_GPIO0",
-			  /* Binary number representing build/revision */
-			  "CONFIG0",
-			  "CONFIG1",
-			  "CONFIG2",
-			  "CONFIG3",
-			  "NC", /* GPIO32 */
-			  "NC", /* GPIO33 */
-			  "NC", /* GPIO34 */
-			  "NC", /* GPIO35 */
-			  "NC", /* GPIO36 */
-			  "NC", /* GPIO37 */
-			  "NC", /* GPIO38 */
-			  "NC", /* GPIO39 */
-			  "PWM0_OUT",
-			  "NC", /* GPIO41 */
-			  "NC", /* GPIO42 */
-			  "NC", /* GPIO43 */
-			  "NC", /* GPIO44 */
-			  "PWM1_OUT",
-			  "HDMI_HPD_P",
-			  "SD_CARD_DET",
-			  /* Used by SD Card */
-			  "SD_CLK_R",
-			  "SD_CMD_R",
-			  "SD_DATA0_R",
-			  "SD_DATA1_R",
-			  "SD_DATA2_R",
-			  "SD_DATA3_R";
-
-	pinctrl-0 = <&gpioout &alt0>;
-};
-
-&hdmi {
-	hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
-	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
-	status = "okay";
-};
-
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
-	status = "okay";
-};
-
-&sdhost {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdhost_gpio48>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_gpio14>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-common.dtsi b/arch/arm/boot/dts/bcm2835-rpi-common.dtsi
deleted file mode 100644
index 8a55b6cded59..000000000000
--- a/arch/arm/boot/dts/bcm2835-rpi-common.dtsi
+++ /dev/null
@@ -1,12 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * This include file covers the common peripherals and configuration between
- * bcm2835, bcm2836 and bcm2837 implementations that interact with RPi's
- * firmware interface.
- */
-
-#include <dt-bindings/power/raspberrypi-power.h>
-
-&v3d {
-	power-domains = <&power RPI_POWER_DOMAIN_V3D>;
-};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
deleted file mode 100644
index 33b2b77aa47d..000000000000
--- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
+++ /dev/null
@@ -1,151 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2017 Stefan Wahren <stefan.wahren@i2se.com>
- */
-
-/dts-v1/;
-#include "bcm2835.dtsi"
-#include "bcm2835-rpi.dtsi"
-#include "bcm283x-rpi-usb-otg.dtsi"
-
-/ {
-	compatible = "raspberrypi,model-zero-w", "brcm,bcm2835";
-	model = "Raspberry Pi Zero W";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0x20000000>;
-	};
-
-	chosen {
-		/* 8250 auxiliary UART instead of pl011 */
-		stdout-path = "serial1:115200n8";
-	};
-
-	leds {
-		led-act {
-			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	wifi_pwrseq: wifi-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&gpio {
-	/*
-	 * This is based on the official GPU firmware DT blob.
-	 *
-	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
-	 * "FOO" = GPIO line named "FOO" on the schematic
-	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
-	 */
-	gpio-line-names = "ID_SDA",
-			  "ID_SCL",
-			  "SDA1",
-			  "SCL1",
-			  "GPIO_GCLK",
-			  "GPIO5",
-			  "GPIO6",
-			  "SPI_CE1_N",
-			  "SPI_CE0_N",
-			  "SPI_MISO",
-			  "SPI_MOSI",
-			  "SPI_SCLK",
-			  "GPIO12",
-			  "GPIO13",
-			  /* Serial port */
-			  "TXD0",
-			  "RXD0",
-			  "GPIO16",
-			  "GPIO17",
-			  "GPIO18",
-			  "GPIO19",
-			  "GPIO20",
-			  "GPIO21",
-			  "GPIO22",
-			  "GPIO23",
-			  "GPIO24",
-			  "GPIO25",
-			  "GPIO26",
-			  "GPIO27",
-			  "SDA0",
-			  "SCL0",
-			  "NC", /* GPIO30 */
-			  "NC", /* GPIO31 */
-			  "NC", /* GPIO32 */
-			  "NC", /* GPIO33 */
-			  "NC", /* GPIO34 */
-			  "NC", /* GPIO35 */
-			  "NC", /* GPIO36 */
-			  "NC", /* GPIO37 */
-			  "NC", /* GPIO38 */
-			  "NC", /* GPIO39 */
-			  "CAM_GPIO1", /* GPIO40 */
-			  "WL_ON", /* GPIO41 */
-			  "NC", /* GPIO42 */
-			  "WIFI_CLK", /* GPIO43 */
-			  "CAM_GPIO0", /* GPIO44 */
-			  "BT_ON", /* GPIO45 */
-			  "HDMI_HPD_N",
-			  "STATUS_LED_N",
-			  /* Used by SD Card */
-			  "SD_CLK_R",
-			  "SD_CMD_R",
-			  "SD_DATA0_R",
-			  "SD_DATA1_R",
-			  "SD_DATA2_R",
-			  "SD_DATA3_R";
-
-	pinctrl-0 = <&gpioout &alt0>;
-};
-
-&hdmi {
-	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
-	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
-	status = "okay";
-};
-
-&sdhci {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>;
-	bus-width = <4>;
-	mmc-pwrseq = <&wifi_pwrseq>;
-	non-removable;
-	status = "okay";
-
-	brcmf: wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-	};
-};
-
-&sdhost {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdhost_gpio48>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_gpio32 &uart0_ctsrts_gpio30>;
-	status = "okay";
-
-	bluetooth {
-		compatible = "brcm,bcm43438-bt";
-		max-speed = <2000000>;
-		shutdown-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_gpio14>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
deleted file mode 100644
index 87ddcad76083..000000000000
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ /dev/null
@@ -1,81 +0,0 @@
-#include <dt-bindings/power/raspberrypi-power.h>
-
-/ {
-	leds {
-		compatible = "gpio-leds";
-
-		led-act {
-			label = "ACT";
-			default-state = "keep";
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	soc {
-		firmware: firmware {
-			compatible = "raspberrypi,bcm2835-firmware", "simple-mfd";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			mboxes = <&mailbox>;
-			dma-ranges;
-		};
-
-		power: power {
-			compatible = "raspberrypi,bcm2835-power";
-			firmware = <&firmware>;
-			#power-domain-cells = <1>;
-		};
-
-		vchiq: mailbox@7e00b840 {
-			compatible = "brcm,bcm2835-vchiq";
-			reg = <0x7e00b840 0x3c>;
-			interrupts = <0 2>;
-		};
-	};
-};
-
-&gpio {
-	pinctrl-names = "default";
-
-	gpioout: gpioout {
-		brcm,pins = <6>;
-		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
-	};
-
-	alt0: alt0 {
-		brcm,pins = <4 5 7 8 9 10 11>;
-		brcm,function = <BCM2835_FSEL_ALT0>;
-	};
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_gpio0>;
-	status = "okay";
-	clock-frequency = <100000>;
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_gpio2>;
-	status = "okay";
-	clock-frequency = <100000>;
-};
-
-&usb {
-	power-domains = <&power RPI_POWER_DOMAIN_USB>;
-};
-
-&vec {
-	power-domains = <&power RPI_POWER_DOMAIN_VEC>;
-	status = "okay";
-};
-
-&dsi0 {
-	power-domains = <&power RPI_POWER_DOMAIN_DSI0>;
-};
-
-&dsi1 {
-	power-domains = <&power RPI_POWER_DOMAIN_DSI1>;
-};
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
deleted file mode 100644
index 0549686134ea..000000000000
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ /dev/null
@@ -1,38 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "bcm283x.dtsi"
-#include "bcm2835-common.dtsi"
-#include "bcm2835-rpi-common.dtsi"
-
-/ {
-	compatible = "brcm,bcm2835";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,arm1176jzf-s";
-			reg = <0x0>;
-		};
-	};
-
-	soc {
-		ranges = <0x7e000000 0x20000000 0x02000000>;
-		dma-ranges = <0x40000000 0x00000000 0x20000000>;
-	};
-
-	arm-pmu {
-		compatible = "arm,arm1176-pmu";
-	};
-};
-
-&cpu_thermal {
-	coefficients = <(-538)	407000>;
-};
-
-/* enable thermal sensor with the correct compatible property set */
-&thermal {
-	compatible = "brcm,bcm2835-thermal";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm2836.dtsi b/arch/arm/boot/dts/bcm2836.dtsi
deleted file mode 100644
index b390006aef79..000000000000
--- a/arch/arm/boot/dts/bcm2836.dtsi
+++ /dev/null
@@ -1,92 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "bcm283x.dtsi"
-#include "bcm2835-common.dtsi"
-#include "bcm2835-rpi-common.dtsi"
-
-/ {
-	compatible = "brcm,bcm2836";
-
-	soc {
-		ranges = <0x7e000000 0x3f000000 0x1000000>,
-			 <0x40000000 0x40000000 0x00001000>;
-		dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
-
-		local_intc: local_intc@40000000 {
-			compatible = "brcm,bcm2836-l1-intc";
-			reg = <0x40000000 0x100>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupt-parent = <&local_intc>;
-		};
-	};
-
-	arm-pmu {
-		compatible = "arm,cortex-a7-pmu";
-		interrupt-parent = <&local_intc>;
-		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupt-parent = <&local_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>, // PHYS_SECURE_PPI
-			     <1 IRQ_TYPE_LEVEL_HIGH>, // PHYS_NONSECURE_PPI
-			     <3 IRQ_TYPE_LEVEL_HIGH>, // VIRT_PPI
-			     <2 IRQ_TYPE_LEVEL_HIGH>; // HYP_PPI
-		always-on;
-	};
-
-	cpus: cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "brcm,bcm2836-smp";
-
-		v7_cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0xf00>;
-			clock-frequency = <800000000>;
-		};
-
-		v7_cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0xf01>;
-			clock-frequency = <800000000>;
-		};
-
-		v7_cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0xf02>;
-			clock-frequency = <800000000>;
-		};
-
-		v7_cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0xf03>;
-			clock-frequency = <800000000>;
-		};
-	};
-};
-
-/* Make the BCM2835-style global interrupt controller be a child of the
- * CPU-local interrupt controller.
- */
-&intc {
-	compatible = "brcm,bcm2836-armctrl-ic";
-	reg = <0x7e00b200 0x200>;
-	interrupt-parent = <&local_intc>;
-	interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&cpu_thermal {
-	coefficients = <(-538)	407000>;
-};
-
-/* enable thermal sensor with the correct compatible property set */
-&thermal {
-	compatible = "brcm,bcm2836-thermal";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
deleted file mode 100644
index 61010266ca9a..000000000000
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
+++ /dev/null
@@ -1,183 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-#include "bcm2837.dtsi"
-#include "bcm2836-rpi.dtsi"
-#include "bcm283x-rpi-lan7515.dtsi"
-#include "bcm283x-rpi-usb-host.dtsi"
-
-/ {
-	compatible = "raspberrypi,3-model-b-plus", "brcm,bcm2837";
-	model = "Raspberry Pi 3 Model B+";
-
-	chosen {
-		/* 8250 auxiliary UART instead of pl011 */
-		stdout-path = "serial1:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0x40000000>;
-	};
-
-	leds {
-		led-act {
-			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-pwr {
-			label = "PWR";
-			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-			linux,default-trigger = "default-on";
-		};
-	};
-
-	wifi_pwrseq: wifi-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&firmware {
-	expgpio: gpio {
-		compatible = "raspberrypi,firmware-gpio";
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-line-names = "BT_ON",
-				  "WL_ON",
-				  "STATUS_LED_R",
-				  "LAN_RUN",
-				  "",
-				  "CAM_GPIO0",
-				  "CAM_GPIO1",
-				  "";
-		status = "okay";
-	};
-};
-
-&gpio {
-	/*
-	 * Taken from rpi_SCH_3bplus_1p0_reduced.pdf and
-	 * the official GPU firmware DT blob.
-	 *
-	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
-	 * "FOO" = GPIO line named "FOO" on the schematic
-	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
-	 */
-	gpio-line-names = "ID_SDA",
-			  "ID_SCL",
-			  "SDA1",
-			  "SCL1",
-			  "GPIO_GCLK",
-			  "GPIO5",
-			  "GPIO6",
-			  "SPI_CE1_N",
-			  "SPI_CE0_N",
-			  "SPI_MISO",
-			  "SPI_MOSI",
-			  "SPI_SCLK",
-			  "GPIO12",
-			  "GPIO13",
-			  /* Serial port */
-			  "TXD1",
-			  "RXD1",
-			  "GPIO16",
-			  "GPIO17",
-			  "GPIO18",
-			  "GPIO19",
-			  "GPIO20",
-			  "GPIO21",
-			  "GPIO22",
-			  "GPIO23",
-			  "GPIO24",
-			  "GPIO25",
-			  "GPIO26",
-			  "GPIO27",
-			  "HDMI_HPD_N",
-			  "STATUS_LED_G",
-			  /* Used by BT module */
-			  "CTS0",
-			  "RTS0",
-			  "TXD0",
-			  "RXD0",
-			  /* Used by Wifi */
-			  "SD1_CLK",
-			  "SD1_CMD",
-			  "SD1_DATA0",
-			  "SD1_DATA1",
-			  "SD1_DATA2",
-			  "SD1_DATA3",
-			  "PWM0_OUT",
-			  "PWM1_OUT",
-			  "ETHCLK",
-			  "WIFI_CLK",
-			  "SDA0",
-			  "SCL0",
-			  "SMPS_SCL",
-			  "SMPS_SDA",
-			  /* Used by SD Card */
-			  "SD_CLK_R",
-			  "SD_CMD_R",
-			  "SD_DATA0_R",
-			  "SD_DATA1_R",
-			  "SD_DATA2_R",
-			  "SD_DATA3_R";
-};
-
-&hdmi {
-	hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
-	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
-	status = "okay";
-};
-
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
-	status = "okay";
-};
-
-/* SDHCI is used to control the SDIO for wireless */
-&sdhci {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_gpio34>;
-	status = "okay";
-	bus-width = <4>;
-	non-removable;
-	mmc-pwrseq = <&wifi_pwrseq>;
-
-	brcmf: wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-	};
-};
-
-/* SDHOST is used to drive the SD card */
-&sdhost {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdhost_gpio48>;
-	status = "okay";
-	bus-width = <4>;
-};
-
-/* uart0 communicates with the BT module */
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>;
-	status = "okay";
-
-	bluetooth {
-		compatible = "brcm,bcm43438-bt";
-		max-speed = <2000000>;
-		shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-/* uart1 is mapped to the pin header */
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_gpio14>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm2837.dtsi b/arch/arm/boot/dts/bcm2837.dtsi
deleted file mode 100644
index 0199ec98cd61..000000000000
--- a/arch/arm/boot/dts/bcm2837.dtsi
+++ /dev/null
@@ -1,95 +0,0 @@
-#include "bcm283x.dtsi"
-#include "bcm2835-common.dtsi"
-#include "bcm2835-rpi-common.dtsi"
-
-/ {
-	compatible = "brcm,bcm2837";
-
-	soc {
-		ranges = <0x7e000000 0x3f000000 0x1000000>,
-			 <0x40000000 0x40000000 0x00001000>;
-		dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
-
-		local_intc: local_intc@40000000 {
-			compatible = "brcm,bcm2836-l1-intc";
-			reg = <0x40000000 0x100>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupt-parent = <&local_intc>;
-		};
-	};
-
-	arm-pmu {
-		compatible = "arm,cortex-a53-pmu";
-		interrupt-parent = <&local_intc>;
-		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupt-parent = <&local_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>, // PHYS_SECURE_PPI
-			     <1 IRQ_TYPE_LEVEL_HIGH>, // PHYS_NONSECURE_PPI
-			     <3 IRQ_TYPE_LEVEL_HIGH>, // VIRT_PPI
-			     <2 IRQ_TYPE_LEVEL_HIGH>; // HYP_PPI
-		always-on;
-	};
-
-	cpus: cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x000000d8>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <1>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x000000e0>;
-		};
-
-		cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <2>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x000000e8>;
-		};
-
-		cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <3>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x000000f0>;
-		};
-	};
-};
-
-/* Make the BCM2835-style global interrupt controller be a child of the
- * CPU-local interrupt controller.
- */
-&intc {
-	compatible = "brcm,bcm2836-armctrl-ic";
-	reg = <0x7e00b200 0x200>;
-	interrupt-parent = <&local_intc>;
-	interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&cpu_thermal {
-	coefficients = <(-538)	412000>;
-};
-
-/* enable thermal sensor with the correct compatible property set */
-&thermal {
-	compatible = "brcm,bcm2837-thermal";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
deleted file mode 100644
index 5b4a481be4f4..000000000000
--- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
+++ /dev/null
@@ -1,80 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2016 Luxul Inc.
- */
-
-/dts-v1/;
-
-#include "bcm4708.dtsi"
-
-/ {
-	compatible = "luxul,xap-1510v1", "brcm,bcm4708";
-	model = "Luxul XAP-1510 V1";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlycon";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		5ghz {
-			label = "bcm53xx:blue:5ghz";
-			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		2ghz {
-			label = "bcm53xx:blue:2ghz";
-			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		status {
-			label = "bcm53xx:green:status";
-			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "timer";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&spi_nor {
-	status = "okay";
-};
-
-&srab {
-	status = "okay";
-
-	ports {
-		port@0 {
-			reg = <0>;
-			label = "poe";
-		};
-
-		port@4 {
-			reg = <4>;
-			label = "lan";
-		};
-
-		port@5 {
-			reg = <5>;
-			label = "cpu";
-			ethernet = <&gmac0>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
deleted file mode 100644
index 68aaf0af3945..000000000000
--- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
+++ /dev/null
@@ -1,75 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2017 Luxul Inc.
- */
-
-/dts-v1/;
-
-#include "bcm47081.dtsi"
-
-/ {
-	compatible = "luxul,xap-1410v1", "brcm,bcm47081", "brcm,bcm4708";
-	model = "Luxul XAP-1410 V1";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		5ghz {
-			label = "bcm53xx:blue:5ghz";
-			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		2ghz {
-			label = "bcm53xx:blue:2ghz";
-			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		status {
-			label = "bcm53xx:green:status";
-			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "timer";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&spi_nor {
-	status = "okay";
-};
-
-&srab {
-	status = "okay";
-
-	ports {
-		port@4 {
-			reg = <4>;
-			label = "poe";
-		};
-
-		port@5 {
-			reg = <5>;
-			label = "cpu";
-			ethernet = <&gmac0>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
deleted file mode 100644
index 9b6887d477d8..000000000000
--- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
+++ /dev/null
@@ -1,51 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
- */
-
-/dts-v1/;
-
-#include "bcm4709.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "linksys,ea9200", "brcm,bcm4709", "brcm,bcm4708";
-	model = "Linksys EA9200";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>,
-		      <0x88000000 0x08000000>;
-	};
-
-	nvram@1c080000 {
-		compatible = "brcm,nvram";
-		reg = <0x1c080000 0x180000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-		};
-
-		restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&usb3_phy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
deleted file mode 100644
index a6e2aeb28675..000000000000
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ /dev/null
@@ -1,120 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for D-Link DIR-885L
- *
- * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
- */
-
-/dts-v1/;
-
-#include "bcm47094.dtsi"
-#include "bcm5301x-nand-cs0-bch1.dtsi"
-
-/ {
-	compatible = "dlink,dir-885l", "brcm,bcm47094", "brcm,bcm4708";
-	model = "D-Link DIR-885L";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlycon";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>,
-		      <0x88000000 0x08000000>;
-	};
-
-	nand_controller: nand-controller@18028000 {
-		nand@0 {
-			partitions {
-				compatible = "fixed-partitions";
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partition@0 {
-					label = "firmware";
-					reg = <0x00000000 0x08000000>;
-				};
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power-white {
-			label = "bcm53xx:white:power";
-			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		wan-white {
-			label = "bcm53xx:white:wan";
-			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-		};
-
-		power-amber {
-			label = "bcm53xx:amber:power";
-			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-		};
-
-		wan-amber {
-			label = "bcm53xx:amber:wan";
-			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-		};
-
-		usb3-white {
-			label = "bcm53xx:white:usb3";
-			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-			trigger-sources = <&ohci_port1>, <&ehci_port1>,
-					  <&xhci_port1>;
-			linux,default-trigger = "usbport";
-		};
-
-		2ghz {
-			label = "bcm53xx:white:2ghz";
-			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-		};
-
-		5ghz {
-			label = "bcm53xx:white:5ghz";
-			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-		};
-
-		/* Switch: router / extender */
-		extender {
-			label = "Extender";
-			linux,code = <BTN_0>;
-			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-		};
-
-		restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&usb3 {
-	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
-};
-
-&spi_nor {
-	status = "okay";
-};
-
-&usb3_phy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
deleted file mode 100644
index 4b8117f32d26..000000000000
--- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
+++ /dev/null
@@ -1,70 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (C) 2017 Luxul Inc.
- */
-
-/dts-v1/;
-
-#include "bcm4708.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "luxul,abr-4500-v1", "brcm,bcm47094", "brcm,bcm4708";
-	model = "Luxul ABR-4500 V1";
-
-	chosen {
-		bootargs = "earlycon";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>,
-		      <0x88000000 0x18000000>;
-	};
-
-	nvram@1eff0000 {
-		compatible = "brcm,nvram";
-		reg = <0x1eff0000 0x10000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		status {
-			label = "bcm53xx:green:status";
-			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "timer";
-		};
-
-		usb3 {
-			label = "bcm53xx:green:usb3";
-			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
-			trigger-sources = <&ohci_port1>, <&ehci_port1>,
-				<&xhci_port1>;
-			linux,default-trigger = "usbport";
-		};
-
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&usb3 {
-	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
-};
-
-&spi_nor {
-	status = "okay";
-};
-
-&usb3_phy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
deleted file mode 100644
index 6fa101f0a90d..000000000000
--- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
+++ /dev/null
@@ -1,78 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2018 Luxul Inc.
- */
-
-/dts-v1/;
-
-#include "bcm47094.dtsi"
-
-/ {
-	compatible = "luxul,xap-1610-v1", "brcm,bcm47094", "brcm,bcm4708";
-	model = "Luxul XAP-1610 V1";
-
-	chosen {
-		bootargs = "earlycon";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		status	{
-			label = "bcm53xx:green:status";
-			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "timer";
-		};
-
-		2ghz {
-			label = "bcm53xx:blue:2ghz";
-			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-		};
-
-		5ghz {
-			label = "bcm53xx:blue:5ghz";
-			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&spi_nor {
-	status = "okay";
-};
-
-&srab {
-	status = "okay";
-
-	ports {
-		port@0 {
-			reg = <0>;
-			label = "poe";
-		};
-
-		port@1 {
-			reg = <1>;
-			label = "lan";
-		};
-
-		port@5 {
-			reg = <5>;
-			label = "cpu";
-			ethernet = <&gmac0>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
deleted file mode 100644
index 5fecce0422c7..000000000000
--- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
+++ /dev/null
@@ -1,70 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (C) 2017 Luxul Inc.
- */
-
-/dts-v1/;
-
-#include "bcm4708.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "luxul,xbr-4500-v1", "brcm,bcm47094", "brcm,bcm4708";
-	model = "Luxul XBR-4500 V1";
-
-	chosen {
-		bootargs = "earlycon";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>,
-		      <0x88000000 0x18000000>;
-	};
-
-	nvram@1eff0000 {
-		compatible = "brcm,nvram";
-		reg = <0x1eff0000 0x10000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		status {
-			label = "bcm53xx:green:status";
-			gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "timer";
-		};
-
-		usb3 {
-			label = "bcm53xx:green:usb3";
-			gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
-			trigger-sources = <&ohci_port1>, <&ehci_port1>,
-				<&xhci_port1>;
-			linux,default-trigger = "usbport";
-		};
-
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&usb3 {
-	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
-};
-
-&spi_nor {
-	status = "okay";
-};
-
-&usb3_phy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
deleted file mode 100644
index 452b8d0ab180..000000000000
--- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
+++ /dev/null
@@ -1,71 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2019 Legrand AV Inc.
- */
-
-/dts-v1/;
-
-#include "bcm47094.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "luxul,xwc-2000-v1", "brcm,bcm47094", "brcm,bcm4708";
-	model = "Luxul XWC-2000 V1";
-
-	chosen {
-		bootargs = "earlycon";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>,
-		      <0x88000000 0x18000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		status	{
-			label = "bcm53xx:green:status";
-			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "timer";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&spi_nor {
-	status = "okay";
-};
-
-&srab {
-	status = "okay";
-
-	ports {
-		port@0 {
-			reg = <0>;
-			label = "lan";
-		};
-
-		port@5 {
-			reg = <5>;
-			label = "cpu";
-			ethernet = <&gmac0>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
deleted file mode 100644
index 24ae3c8a3e09..000000000000
--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
+++ /dev/null
@@ -1,122 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2018 Luxul Inc.
- */
-
-/dts-v1/;
-
-#include "bcm47094.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "luxul,xwr-3150-v1", "brcm,bcm47094", "brcm,bcm4708";
-	model = "Luxul XWR-3150 V1";
-
-	chosen {
-		bootargs = "earlycon";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>,
-		      <0x88000000 0x18000000>;
-	};
-
-	nvram@1eff0000 {
-		compatible = "brcm,nvram";
-		reg = <0x1eff0000 0x10000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power	{
-			label = "bcm53xx:green:power";
-			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		usb3	{
-			label = "bcm53xx:green:usb3";
-			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-			trigger-sources = <&ohci_port1>, <&ehci_port1>,
-					  <&xhci_port1>;
-			linux,default-trigger = "usbport";
-		};
-
-		status	{
-			label = "bcm53xx:green:status";
-			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "timer";
-		};
-
-		2ghz {
-			label = "bcm53xx:green:2ghz";
-			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-		};
-
-		5ghz {
-			label = "bcm53xx:green:5ghz";
-			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&usb3 {
-	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
-};
-
-&usb3_phy {
-	status = "okay";
-};
-
-&spi_nor {
-	status = "okay";
-};
-
-&srab {
-	status = "okay";
-
-	ports {
-		port@0 {
-			reg = <0>;
-			label = "lan4";
-		};
-
-		port@1 {
-			reg = <1>;
-			label = "lan3";
-		};
-
-		port@2 {
-			reg = <2>;
-			label = "lan2";
-		};
-
-		port@3 {
-			reg = <3>;
-			label = "lan1";
-		};
-
-		port@4 {
-			reg = <4>;
-			label = "wan";
-		};
-
-		port@5 {
-			reg = <5>;
-			label = "cpu";
-			ethernet = <&gmac0>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
deleted file mode 100644
index 57ca1cfaecd8..000000000000
--- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2017 Luxul Inc.
- */
-
-/dts-v1/;
-
-#include "bcm53573.dtsi"
-
-/ {
-	compatible = "luxul,xap-1440-v1", "brcm,bcm47189", "brcm,bcm53573";
-	model = "Luxul XAP-1440 V1";
-
-	chosen {
-		bootargs = "earlycon";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		wlan {
-			label = "bcm53xx:blue:wlan";
-			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
-		};
-
-		system {
-			label = "bcm53xx:green:system";
-			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "timer";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
deleted file mode 100644
index 3b978dc8997a..000000000000
--- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
+++ /dev/null
@@ -1,197 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for Meraki MR32 / Codename: Espresso
- *
- * Copyright (C) 2018-2020 Christian Lamparter <chunkeey@gmail.com>
- */
-
-/dts-v1/;
-
-#include "bcm4708.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-#include <dt-bindings/leds/common.h>
-
-/ {
-	compatible = "meraki,mr32", "brcm,brcm53016", "brcm,bcm4708";
-	model = "Meraki MR32";
-
-	chosen {
-		bootargs = " console=ttyS0,115200n8 earlycon";
-	};
-
-	memory {
-		reg = <0x00000000 0x08000000>;
-		device_type = "memory";
-	};
-
-	aliases {
-		serial1 = &uart2;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		sysled3 {
-			function = LED_FUNCTION_FAULT;
-			color = <LED_COLOR_ID_AMBER>;
-			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
-			panic-indicator;
-		};
-		sysled2 {
-			function = LED_FUNCTION_INDICATOR;
-			color = <LED_COLOR_ID_WHITE>;
-			gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	pwm-leds {
-		compatible = "pwm-leds";
-
-		red {
-			/* SYS-LED 1 - Tricolor */
-			function = LED_FUNCTION_INDICATOR;
-			color = <LED_COLOR_ID_RED>;
-			pwms = <&pwm 0 50000 0>;
-			max-brightness = <255>;
-		};
-
-		green {
-			/* SYS-LED 1 - Tricolor */
-			function = LED_FUNCTION_POWER;
-			color = <LED_COLOR_ID_GREEN>;
-			pwms = <&pwm 1 50000 0>;
-			max-brightness = <255>;
-		};
-
-		blue {
-			/* SYS-LED 1 - Tricolor */
-			function = LED_FUNCTION_INDICATOR;
-			color = <LED_COLOR_ID_BLUE>;
-			pwms = <&pwm 2 50000 0>;
-			max-brightness = <255>;
-		};
-	};
-
-	i2c {
-		/*
-		 * The platform provided I2C does not budge.
-		 * This is a replacement until I can figure
-		 * out what are the missing bits...
-		 */
-
-		compatible = "i2c-gpio";
-		sda-gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
-		scl-gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
-		i2c-gpio,delay-us = <10>; /* close to 100 kHz */
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		current_sense: ina219@45 {
-			compatible = "ti,ina219";
-			reg = <0x45>;
-			shunt-resistor = <60000>; /* = 60 mOhms */
-		};
-
-		eeprom: eeprom@50 {
-			compatible = "atmel,24c64";
-			reg = <0x50>;
-			pagesize = <32>;
-			read-only;
-		};
-	};
-};
-
-&uart0 {
-	clock-frequency = <62500000>;
-	/delete-property/ clocks;
-};
-
-&uart1 {
-	status = "disabled";
-};
-
-&uart2 {
-	status = "okay";
-	/*
-	 * bluetooth-le {
-	 *	compatible = "brcm,bcm20732";
-	 *	enable-gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
-	 *};
-	 */
-};
-
-&gmac1 {
-	status = "disabled";
-};
-&gmac2 {
-	status = "disabled";
-};
-&gmac3 {
-	status = "disabled";
-};
-
-&pwm {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinmux_pwm>;
-};
-
-&nandcs {
-	nand-ecc-algo = "hw";
-
-	partitions {
-		/*
-		 * The partition autodetection does not work for this device.
-		 * It will only detect the "nvram" partition with an incorrect size.
-		 *	[    1.721667] 1 bcm47xxpart partitions found on MTD device brcmnand.0
-		 *	[    1.727962] Creating 1 MTD partitions on "brcmnand.0":
-		 *	[    1.733117] 0x000000400000-0x000008000000 : "nvram"
-		 */
-
-		compatible = "fixed-partitions";
-		#address-cells = <0x1>;
-		#size-cells = <0x1>;
-
-		partition0@0 {
-			label = "u-boot";
-			reg = <0x0 0x100000>;
-			read-only;
-		};
-
-		partition1@100000 {
-			label = "bootkernel1";
-			reg = <0x100000 0x300000>;
-			read-only;
-		};
-
-		partition2@400000 {
-			label = "nvram";
-			reg = <0x400000 0x100000>;
-			read-only;
-		};
-
-		partition3@500000 {
-			label = "bootkernel2";
-			reg = <0x500000 0x300000>;
-			read-only;
-		};
-
-		partition4@800000 {
-			label = "ubi";
-			reg = <0x800000 0x7780000>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
deleted file mode 100644
index f92089290ccd..000000000000
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ /dev/null
@@ -1,574 +0,0 @@
-/*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * Generic DTS part for all BCM53010, BCM53011, BCM53012, BCM53014, BCM53015,
- * BCM53016, BCM53017, BCM53018, BCM4707, BCM4708 and BCM4709 SoCs
- *
- * Copyright 2013-2014 Hauke Mehrtens <hauke@hauke-m.de>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
- */
-
-#include <dt-bindings/clock/bcm-nsp.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&gic>;
-
-	chipcommonA@18000000 {
-		compatible = "simple-bus";
-		ranges = <0x00000000 0x18000000 0x00001000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		uart0: serial@300 {
-			compatible = "ns16550";
-			reg = <0x0300 0x100>;
-			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&iprocslow>;
-			status = "disabled";
-		};
-
-		uart1: serial@400 {
-			compatible = "ns16550";
-			reg = <0x0400 0x100>;
-			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&iprocslow>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinmux_uart1>;
-			status = "disabled";
-		};
-	};
-
-	mpcore@19000000 {
-		compatible = "simple-bus";
-		ranges = <0x00000000 0x19000000 0x00023000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		a9pll: arm_clk@0 {
-			#clock-cells = <0>;
-			compatible = "brcm,nsp-armpll";
-			clocks = <&osc>;
-			reg = <0x00000 0x1000>;
-		};
-
-		scu@20000 {
-			compatible = "arm,cortex-a9-scu";
-			reg = <0x20000 0x100>;
-		};
-
-		timer@20200 {
-			compatible = "arm,cortex-a9-global-timer";
-			reg = <0x20200 0x100>;
-			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&periph_clk>;
-		};
-
-		timer@20600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x20600 0x20>;
-			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
-						  IRQ_TYPE_EDGE_RISING)>;
-			clocks = <&periph_clk>;
-		};
-
-		watchdog@20620 {
-			compatible = "arm,cortex-a9-twd-wdt";
-			reg = <0x20620 0x20>;
-			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
-						  IRQ_TYPE_EDGE_RISING)>;
-			clocks = <&periph_clk>;
-		};
-
-		gic: interrupt-controller@21000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			interrupt-controller;
-			reg = <0x21000 0x1000>,
-			      <0x20100 0x100>;
-		};
-
-		L2: cache-controller@22000 {
-			compatible = "arm,pl310-cache";
-			reg = <0x22000 0x1000>;
-			cache-unified;
-			arm,shared-override;
-			prefetch-data = <1>;
-			prefetch-instr = <1>;
-			cache-level = <2>;
-		};
-	};
-
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts =
-			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		osc: oscillator {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <25000000>;
-		};
-
-		iprocmed: iprocmed {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
-			clock-div = <2>;
-			clock-mult = <1>;
-		};
-
-		iprocslow: iprocslow {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
-			clock-div = <4>;
-			clock-mult = <1>;
-		};
-
-		periph_clk: periph_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&a9pll>;
-			clock-div = <2>;
-			clock-mult = <1>;
-		};
-	};
-
-	usb2_phy: usb2-phy@1800c000 {
-		compatible = "brcm,ns-usb2-phy";
-		reg = <0x1800c000 0x1000>;
-		reg-names = "dmu";
-		#phy-cells = <0>;
-		clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
-		clock-names = "phy-ref-clk";
-	};
-
-	axi@18000000 {
-		compatible = "brcm,bus-axi";
-		reg = <0x18000000 0x1000>;
-		ranges = <0x00000000 0x18000000 0x00100000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0x000fffff 0xffff>;
-		interrupt-map = 
-			/* ChipCommon */
-			<0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* Switch Register Access Block */
-			<0x00007000 0 &gic GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 1 &gic GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 2 &gic GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 3 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 4 &gic GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 5 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 6 &gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 7 &gic GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 8 &gic GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 9 &gic GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 10 &gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 11 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 12 &gic GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* PCIe Controller 0 */
-			<0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* PCIe Controller 1 */
-			<0x00013000 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00013000 1 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00013000 2 &gic GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00013000 3 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00013000 4 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00013000 5 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* PCIe Controller 2 */
-			<0x00014000 0 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00014000 1 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00014000 2 &gic GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00014000 3 &gic GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00014000 4 &gic GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00014000 5 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* USB 2.0 Controller */
-			<0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* USB 3.0 Controller */
-			<0x00023000 0 &gic GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* Ethernet Controller 0 */
-			<0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* Ethernet Controller 1 */
-			<0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* Ethernet Controller 2 */
-			<0x00026000 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* Ethernet Controller 3 */
-			<0x00027000 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* NAND Controller */
-			<0x00028000 0 &gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00028000 1 &gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00028000 2 &gic GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00028000 3 &gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00028000 4 &gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00028000 5 &gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-
-		chipcommon: chipcommon@0 {
-			reg = <0x00000000 0x1000>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		pcie0: pcie@12000 {
-			reg = <0x00012000 0x1000>;
-		};
-
-		pcie1: pcie@13000 {
-			reg = <0x00013000 0x1000>;
-		};
-
-		pcie2: pcie@14000 {
-			reg = <0x00014000 0x1000>;
-		};
-
-		usb2: usb2@21000 {
-			reg = <0x00021000 0x1000>;
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			interrupt-parent = <&gic>;
-
-			ehci: usb@21000 {
-				#usb-cells = <0>;
-
-				compatible = "generic-ehci";
-				reg = <0x00021000 0x1000>;
-				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&usb2_phy>;
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ehci_port1: port@1 {
-					reg = <1>;
-					#trigger-source-cells = <0>;
-				};
-
-				ehci_port2: port@2 {
-					reg = <2>;
-					#trigger-source-cells = <0>;
-				};
-			};
-
-			ohci: usb@22000 {
-				#usb-cells = <0>;
-
-				compatible = "generic-ohci";
-				reg = <0x00022000 0x1000>;
-				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ohci_port1: port@1 {
-					reg = <1>;
-					#trigger-source-cells = <0>;
-				};
-
-				ohci_port2: port@2 {
-					reg = <2>;
-					#trigger-source-cells = <0>;
-				};
-			};
-		};
-
-		usb3: usb3@23000 {
-			reg = <0x00023000 0x1000>;
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			interrupt-parent = <&gic>;
-
-			xhci: usb@23000 {
-				#usb-cells = <0>;
-
-				compatible = "generic-xhci";
-				reg = <0x00023000 0x1000>;
-				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&usb3_phy>;
-				phy-names = "usb";
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				xhci_port1: port@1 {
-					reg = <1>;
-					#trigger-source-cells = <0>;
-				};
-			};
-		};
-
-		gmac0: ethernet@24000 {
-			reg = <0x24000 0x800>;
-		};
-
-		gmac1: ethernet@25000 {
-			reg = <0x25000 0x800>;
-		};
-
-		gmac2: ethernet@26000 {
-			reg = <0x26000 0x800>;
-		};
-
-		gmac3: ethernet@27000 {
-			reg = <0x27000 0x800>;
-		};
-	};
-
-	pwm: pwm@18002000 {
-		compatible = "brcm,iproc-pwm";
-		reg = <0x18002000 0x28>;
-		clocks = <&osc>;
-		#pwm-cells = <3>;
-		status = "disabled";
-	};
-
-	mdio: mdio@18003000 {
-		compatible = "brcm,iproc-mdio";
-		reg = <0x18003000 0x8>;
-		#size-cells = <0>;
-		#address-cells = <1>;
-	};
-
-	mdio-bus-mux@18003000 {
-		compatible = "mdio-mux-mmioreg";
-		mdio-parent-bus = <&mdio>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x18003000 0x4>;
-		mux-mask = <0x200>;
-
-		mdio@0 {
-			reg = <0x0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			usb3_phy: usb3-phy@10 {
-				compatible = "brcm,ns-ax-usb3-phy";
-				reg = <0x10>;
-				usb3-dmp-syscon = <&usb3_dmp>;
-				#phy-cells = <0>;
-				status = "disabled";
-			};
-		};
-	};
-
-	usb3_dmp: syscon@18105000 {
-		reg = <0x18105000 0x1000>;
-	};
-
-	uart2: serial@18008000 {
-		compatible = "ns16550a";
-		reg = <0x18008000 0x20>;
-		clocks = <&iprocslow>;
-		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		status = "disabled";
-	};
-
-	i2c0: i2c@18009000 {
-		compatible = "brcm,iproc-i2c";
-		reg = <0x18009000 0x50>;
-		interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clock-frequency = <100000>;
-		status = "disabled";
-	};
-
-	dmu@1800c000 {
-		compatible = "simple-bus";
-		ranges = <0 0x1800c000 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		cru@100 {
-			compatible = "simple-bus";
-			reg = <0x100 0x1a4>;
-			ranges;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			lcpll0: lcpll0@100 {
-				#clock-cells = <1>;
-				compatible = "brcm,nsp-lcpll0";
-				reg = <0x100 0x14>;
-				clocks = <&osc>;
-				clock-output-names = "lcpll0", "pcie_phy",
-						     "sdio", "ddr_phy";
-			};
-
-			genpll: genpll@140 {
-				#clock-cells = <1>;
-				compatible = "brcm,nsp-genpll";
-				reg = <0x140 0x24>;
-				clocks = <&osc>;
-				clock-output-names = "genpll", "phy",
-						     "ethernetclk",
-						     "usbclk", "iprocfast",
-						     "sata1", "sata2";
-			};
-
-			pinctrl: pin-controller@1c0 {
-				compatible = "brcm,bcm4708-pinmux";
-				reg = <0x1c0 0x24>;
-				reg-names = "cru_gpio_control";
-
-				spi-pins {
-					groups = "spi_grp";
-					function = "spi";
-				};
-
-				pinmux_i2c: i2c-pins {
-					groups = "i2c_grp";
-					function = "i2c";
-				};
-
-				pinmux_pwm: pwm-pins {
-					groups = "pwm0_grp", "pwm1_grp",
-						 "pwm2_grp", "pwm3_grp";
-					function = "pwm";
-				};
-
-				pinmux_uart1: uart1-pins {
-					groups = "uart1_grp";
-					function = "uart1";
-				};
-			};
-
-			thermal: thermal@2c0 {
-				compatible = "brcm,ns-thermal";
-				reg = <0x2c0 0x10>;
-				#thermal-sensor-cells = <0>;
-			};
-		};
-	};
-
-	srab: ethernet-switch@18007000 {
-		compatible = "brcm,bcm53011-srab", "brcm,bcm5301x-srab";
-		reg = <0x18007000 0x1000>;
-
-		status = "disabled";
-
-		/* ports are defined in board DTS */
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-
-	rng: rng@18004000 {
-		compatible = "brcm,bcm5301x-rng";
-		reg = <0x18004000 0x14>;
-	};
-
-	nand_controller: nand-controller@18028000 {
-		compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
-		reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;
-		reg-names = "nand", "iproc-idm", "iproc-ext";
-		interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		brcm,nand-has-wp;
-	};
-
-	spi@18029200 {
-		compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
-		reg = <0x18029200 0x184>,
-		      <0x18029000 0x124>,
-		      <0x1811b408 0x004>,
-		      <0x180293a0 0x01c>;
-		reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
-		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "mspi_done",
-				  "mspi_halted",
-				  "spi_lr_fullness_reached",
-				  "spi_lr_session_aborted",
-				  "spi_lr_impatient",
-				  "spi_lr_session_done",
-				  "spi_lr_overread";
-		clocks = <&iprocmed>;
-		clock-names = "iprocmed";
-		num-cs = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		spi_nor: flash@0 {
-			compatible = "jedec,spi-nor";
-			reg = <0>;
-			spi-max-frequency = <20000000>;
-			status = "disabled";
-
-			partitions {
-				compatible = "brcm,bcm947xx-cfe-partitions";
-			};
-		};
-	};
-
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <1000>;
-			coefficients = <(-556) 418000>;
-			thermal-sensors = <&thermal>;
-
-			trips {
-				cpu-crit {
-					temperature	= <125000>;
-					hysteresis	= <0>;
-					type		= "critical";
-				};
-			};
-
-			cooling-maps {
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm59056.dtsi b/arch/arm/boot/dts/bcm59056.dtsi
deleted file mode 100644
index a9bb7ad81378..000000000000
--- a/arch/arm/boot/dts/bcm59056.dtsi
+++ /dev/null
@@ -1,91 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
-* Copyright 2014 Linaro Limited
-* Author: Matt Porter <mporter@linaro.org>
-*/
-
-&pmu {
-	compatible = "brcm,bcm59056";
-	regulators {
-		rfldo_reg: rfldo {
-		};
-
-		camldo1_reg: camldo1 {
-		};
-
-		camldo2_reg: camldo2 {
-		};
-
-		simldo1_reg: simldo1 {
-		};
-
-		simldo2_reg: simldo2 {
-		};
-
-		sdldo_reg: sdldo {
-		};
-
-		sdxldo_reg: sdxldo {
-		};
-
-		mmcldo1_reg: mmcldo1 {
-		};
-
-		mmcldo2_reg: mmcldo2 {
-		};
-
-		audldo_reg: audldo {
-		};
-
-		micldo_reg: micldo {
-		};
-
-		usbldo_reg: usbldo {
-		};
-
-		vibldo_reg: vibldo {
-		};
-
-		csr_reg: csr {
-		};
-
-		iosr1_reg: iosr1 {
-		};
-
-		iosr2_reg: iosr2 {
-		};
-
-		msr_reg: msr {
-		};
-
-		sdsr1_reg: sdsr1 {
-		};
-
-		sdsr2_reg: sdsr2 {
-		};
-
-		vsr_reg: vsr {
-		};
-
-		gpldo1_reg: gpldo1 {
-		};
-
-		gpldo2_reg: gpldo2 {
-		};
-
-		gpldo3_reg: gpldo3 {
-		};
-
-		gpldo4_reg: gpldo4 {
-		};
-
-		gpldo5_reg: gpldo5 {
-		};
-
-		gpldo6_reg: gpldo6 {
-		};
-
-		vbus_reg: vbus {
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi
deleted file mode 100644
index cca49a2e2d62..000000000000
--- a/arch/arm/boot/dts/bcm63138.dtsi
+++ /dev/null
@@ -1,229 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Broadcom BCM63138 DSL SoCs Device Tree
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "brcm,bcm63138";
-	model = "Broadcom BCM63138 DSL SoC";
-	interrupt-parent = <&gic>;
-
-	aliases {
-		uart0 = &serial0;
-		uart1 = &serial1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <0>;
-			enable-method = "brcm,bcm63138";
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <1>;
-			enable-method = "brcm,bcm63138";
-			resets = <&pmb0 4 1>;
-		};
-	};
-
-	clocks {
-		/* UBUS peripheral clock */
-		periph_clk: periph_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <50000000>;
-			clock-output-names = "periph";
-		};
-
-		/* peripheral clock for system timer */
-		axi_clk: axi_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&armpll>;
-			clock-div = <2>;
-			clock-mult = <1>;
-		};
-
-		/* APB bus clock */
-		apb_clk: apb_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&armpll>;
-			clock-div = <4>;
-			clock-mult = <1>;
-		};
-	};
-
-	/* ARM bus */
-	axi@80000000 {
-		compatible = "simple-bus";
-		ranges = <0 0x80000000 0x784000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		L2: cache-controller@1d000 {
-			compatible = "arm,pl310-cache";
-			reg = <0x1d000 0x1000>;
-			cache-unified;
-			cache-level = <2>;
-			cache-size = <524288>;
-			cache-sets = <1024>;
-			cache-line-size = <32>;
-			interrupts = <GIC_PPI 0 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		scu: scu@1e000 {
-			compatible = "arm,cortex-a9-scu";
-			reg = <0x1e000 0x100>;
-		};
-
-		gic: interrupt-controller@1f000 {
-			compatible = "arm,cortex-a9-gic";
-			reg = <0x1f000 0x1000
-				0x1e100 0x100>;
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			interrupt-controller;
-		};
-
-		global_timer: timer@1e200 {
-			compatible = "arm,cortex-a9-global-timer";
-			reg = <0x1e200 0x20>;
-			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&axi_clk>;
-		};
-
-		local_timer: local-timer@1e600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x1e600 0x20>;
-			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
-						  IRQ_TYPE_EDGE_RISING)>;
-			clocks = <&axi_clk>;
-		};
-
-		twd_watchdog: watchdog@1e620 {
-			compatible = "arm,cortex-a9-twd-wdt";
-			reg = <0x1e620 0x20>;
-			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
-						  IRQ_TYPE_LEVEL_HIGH)>;
-		};
-
-		armpll: armpll@20000 {
-			#clock-cells = <0>;
-			compatible = "brcm,bcm63138-armpll";
-			clocks = <&periph_clk>;
-			reg = <0x20000 0xf00>;
-		};
-
-		pmb0: reset-controller@4800c0 {
-			compatible = "brcm,bcm63138-pmb";
-			reg = <0x4800c0 0x10>;
-			#reset-cells = <2>;
-		};
-
-		pmb1: reset-controller@4800e0 {
-			compatible = "brcm,bcm63138-pmb";
-			reg = <0x4800e0 0x10>;
-			#reset-cells = <2>;
-		};
-
-		ahci: sata@a000 {
-			compatible = "brcm,bcm63138-ahci", "brcm,sata3-ahci";
-			reg-names = "ahci", "top-ctrl";
-			reg = <0xa000 0x9ac>, <0x8040 0x24>;
-			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			resets = <&pmb0 3 1>;
-			reset-names = "ahci";
-			status = "disabled";
-
-			sata0: sata-port@0 {
-				reg = <0>;
-				phys = <&sata_phy0>;
-			};
-		};
-
-		sata_phy: sata-phy@8100 {
-			compatible = "brcm,bcm63138-sata-phy", "brcm,phy-sata3";
-			reg = <0x8100 0x1e00>;
-			reg-names = "phy";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-
-			sata_phy0: sata-phy@0 {
-				reg = <0>;
-				#phy-cells = <0>;
-			};
-		};
-	};
-
-	/* Legacy UBUS base */
-	ubus@fffe8000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xfffe8000 0x8100>;
-
-		timer: timer@80 {
-			compatible = "brcm,bcm6328-timer", "syscon";
-			reg = <0x80 0x3c>;
-		};
-
-		serial0: serial@600 {
-			compatible = "brcm,bcm6345-uart";
-			reg = <0x600 0x1b>;
-			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&periph_clk>;
-			clock-names = "periph";
-			status = "disabled";
-		};
-
-		serial1: serial@620 {
-			compatible = "brcm,bcm6345-uart";
-			reg = <0x620 0x1b>;
-			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&periph_clk>;
-			clock-names = "periph";
-			status = "disabled";
-		};
-
-		nand_controller: nand-controller@2000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.0", "brcm,brcmnand";
-			reg = <0x2000 0x600>, <0xf0 0x10>;
-			reg-names = "nand", "nand-int-base";
-			status = "disabled";
-			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "nand";
-		};
-
-		bootlut: bootlut@8000 {
-			compatible = "brcm,bcm63138-bootlut";
-			reg = <0x8000 0x50>;
-		};
-
-		reboot {
-			compatible = "syscon-reboot";
-			regmap = <&timer>;
-			offset = <0x34>;
-			mask = <1>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm963138dvt.dts b/arch/arm/boot/dts/bcm963138dvt.dts
deleted file mode 100644
index df5c8ab90627..000000000000
--- a/arch/arm/boot/dts/bcm963138dvt.dts
+++ /dev/null
@@ -1,52 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Broadcom BCM63138 Reference Board DTS
- */
-
-/dts-v1/;
-
-#include "bcm63138.dtsi"
-
-/ {
-	compatible = "brcm,BCM963138DVT", "brcm,bcm63138";
-	model = "Broadcom BCM963138DVT";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-		stdout-path = &serial0;
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x08000000>;
-	};
-
-};
-
-&serial0 {
-	status = "okay";
-};
-
-&serial1 {
-	status = "okay";
-};
-
-&nand_controller {
-	status = "okay";
-
-	nand@0 {
-		compatible = "brcm,nandcs";
-		reg = <0>;
-		nand-ecc-strength = <4>;
-		nand-ecc-step-size = <512>;
-		brcm,nand-oob-sectors-size = <16>;
-	};
-};
-
-&ahci {
-	status = "okay";
-};
-
-&sata_phy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/broadcom/Makefile b/arch/arm/boot/dts/broadcom/Makefile
new file mode 100644
index 000000000000..2552e11b5e31
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/Makefile
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: GPL-2.0
+# Enables support for device-tree overlays
+DTC_FLAGS_bcm2835-rpi-b := -@
+DTC_FLAGS_bcm2835-rpi-a := -@
+DTC_FLAGS_bcm2835-rpi-b-rev2 := -@
+DTC_FLAGS_bcm2835-rpi-b-plus := -@
+DTC_FLAGS_bcm2835-rpi-a-plus := -@
+DTC_FLAGS_bcm2835-rpi-cm1-io1 := -@
+DTC_FLAGS_bcm2836-rpi-2-b := -@
+DTC_FLAGS_bcm2837-rpi-2-b := -@
+DTC_FLAGS_bcm2837-rpi-3-a-plus := -@
+DTC_FLAGS_bcm2837-rpi-3-b := -@
+DTC_FLAGS_bcm2837-rpi-3-b-plus := -@
+DTC_FLAGS_bcm2837-rpi-cm3-io3 := -@
+DTC_FLAGS_bcm2837-rpi-zero-2-w := -@
+DTC_FLAGS_bcm2711-rpi-400 := -@
+DTC_FLAGS_bcm2711-rpi-4-b := -@
+DTC_FLAGS_bcm2711-rpi-cm4-io := -@
+DTC_FLAGS_bcm2835-rpi-zero := -@
+DTC_FLAGS_bcm2835-rpi-zero-w := -@
+dtb-$(CONFIG_ARCH_BCM2835) += \
+	bcm2835-rpi-b.dtb \
+	bcm2835-rpi-a.dtb \
+	bcm2835-rpi-b-rev2.dtb \
+	bcm2835-rpi-b-plus.dtb \
+	bcm2835-rpi-a-plus.dtb \
+	bcm2835-rpi-cm1-io1.dtb \
+	bcm2836-rpi-2-b.dtb \
+	bcm2837-rpi-2-b.dtb \
+	bcm2837-rpi-3-a-plus.dtb \
+	bcm2837-rpi-3-b.dtb \
+	bcm2837-rpi-3-b-plus.dtb \
+	bcm2837-rpi-cm3-io3.dtb \
+	bcm2837-rpi-zero-2-w.dtb \
+	bcm2711-rpi-400.dtb \
+	bcm2711-rpi-4-b.dtb \
+	bcm2711-rpi-cm4-io.dtb \
+	bcm2835-rpi-zero.dtb \
+	bcm2835-rpi-zero-w.dtb
+dtb-$(CONFIG_ARCH_BCMBCA) += \
+	bcm6846-genexis-xg6846b.dtb \
+	bcm947622.dtb \
+	bcm963138.dtb \
+	bcm963138dvt.dtb \
+	bcm963148.dtb \
+	bcm963178.dtb \
+	bcm96756.dtb \
+	bcm96846.dtb \
+	bcm96855.dtb \
+	bcm96878.dtb
+dtb-$(CONFIG_ARCH_BCM_5301X) += \
+	bcm4708-asus-rt-ac56u.dtb \
+	bcm4708-asus-rt-ac68u.dtb \
+	bcm4708-buffalo-wxr-1750dhp.dtb \
+	bcm4708-buffalo-wzr-1750dhp.dtb \
+	bcm4708-buffalo-wzr-1166dhp.dtb \
+	bcm4708-buffalo-wzr-1166dhp2.dtb \
+	bcm4708-linksys-ea6300-v1.dtb \
+	bcm4708-linksys-ea6500-v2.dtb \
+	bcm4708-luxul-xap-1510.dtb \
+	bcm4708-luxul-xwc-1000.dtb \
+	bcm4708-netgear-r6250.dtb \
+	bcm4708-netgear-r6300-v2.dtb \
+	bcm4708-smartrg-sr400ac.dtb \
+	bcm47081-asus-rt-n18u.dtb \
+	bcm47081-buffalo-wzr-600dhp2.dtb \
+	bcm47081-buffalo-wzr-900dhp.dtb \
+	bcm47081-luxul-xap-1410.dtb \
+	bcm47081-luxul-xwr-1200.dtb \
+	bcm47081-tplink-archer-c5-v2.dtb \
+	bcm4709-asus-rt-ac3200.dtb \
+	bcm4709-asus-rt-ac87u.dtb \
+	bcm4709-buffalo-wxr-1900dhp.dtb \
+	bcm4709-linksys-ea9200.dtb \
+	bcm4709-netgear-r7000.dtb \
+	bcm4709-netgear-r8000.dtb \
+	bcm4709-tplink-archer-c9-v1.dtb \
+	bcm47094-asus-rt-ac3100.dtb \
+	bcm47094-asus-rt-ac5300.dtb \
+	bcm47094-asus-rt-ac88u.dtb \
+	bcm47094-dlink-dir-885l.dtb \
+	bcm47094-dlink-dir-890l.dtb \
+	bcm47094-linksys-panamera.dtb \
+	bcm47094-luxul-abr-4500.dtb \
+	bcm47094-luxul-xap-1610.dtb \
+	bcm47094-luxul-xbr-4500.dtb \
+	bcm47094-luxul-xwc-2000.dtb \
+	bcm47094-luxul-xwr-3100.dtb \
+	bcm47094-luxul-xwr-3150-v1.dtb \
+	bcm47094-netgear-r8500.dtb \
+	bcm47094-phicomm-k3.dtb \
+	bcm53015-meraki-mr26.dtb \
+	bcm53016-dlink-dwl-8610ap.dtb \
+	bcm53016-meraki-mr32.dtb \
+	bcm94708.dtb \
+	bcm94709.dtb \
+	bcm953012er.dtb \
+	bcm953012hr.dtb \
+	bcm953012k.dtb
+dtb-$(CONFIG_ARCH_BCM_53573) += \
+	bcm47189-luxul-xap-1440.dtb \
+	bcm47189-luxul-xap-810.dtb \
+	bcm47189-tenda-ac9.dtb \
+	bcm947189acdbmr.dtb
+dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
+	bcm911360_entphn.dtb \
+	bcm911360k.dtb \
+	bcm958300k.dtb \
+	bcm958305k.dtb
+dtb-$(CONFIG_ARCH_BCM_HR2) += \
+	bcm53340-ubnt-unifi-switch8.dtb
+dtb-$(CONFIG_ARCH_BCM_MOBILE) += \
+	bcm28155-ap.dtb \
+	bcm21664-garnet.dtb \
+	bcm23550-sparrow.dtb
+dtb-$(CONFIG_ARCH_BCM_NSP) += \
+	bcm958522er.dtb \
+	bcm958525er.dtb \
+	bcm958525xmc.dtb \
+	bcm958622hr.dtb \
+	bcm958623hr.dtb \
+	bcm958625-meraki-mx64.dtb \
+	bcm958625-meraki-mx64-a0.dtb \
+	bcm958625-meraki-mx64w.dtb \
+	bcm958625-meraki-mx64w-a0.dtb \
+	bcm958625-meraki-mx65.dtb \
+	bcm958625-meraki-mx65w.dtb \
+	bcm958625hr.dtb \
+	bcm988312hr.dtb \
+	bcm958625k.dtb
+dtb-$(CONFIG_ARCH_BRCMSTB) += \
+	bcm7445-bcm97445svmb.dtb
diff --git a/arch/arm/boot/dts/bcm-cygnus-clock.dtsi b/arch/arm/boot/dts/broadcom/bcm-cygnus-clock.dtsi
index 52f91a12a99a..52f91a12a99a 100644
--- a/arch/arm/boot/dts/bcm-cygnus-clock.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm-cygnus-clock.dtsi
diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi
index 8ecb7861ce10..07ca0d993c9f 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi
@@ -112,18 +112,18 @@
 			status = "disabled";
 		};
 
-		pcie_phy: phy@301d0a0 {
+		pcie_phy: pcie_phy@301d0a0 {
 			compatible = "brcm,cygnus-pcie-phy";
 			reg = <0x0301d0a0 0x14>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			pcie0_phy: phy@0 {
+			pcie0_phy: pcie-phy@0 {
 				reg = <0>;
 				#phy-cells = <0>;
 			};
 
-			pcie1_phy: phy@1 {
+			pcie1_phy: pcie-phy@1 {
 				reg = <1>;
 				#phy-cells = <0>;
 			};
@@ -167,6 +167,7 @@
 			#gpio-cells = <2>;
 			gpio-controller;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupt-parent = <&mailbox>;
 			interrupts = <0>;
 		};
@@ -247,6 +248,7 @@
 			gpio-controller;
 			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 
 		i2c1: i2c@1800b000 {
@@ -274,8 +276,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
-			ranges = <0x81000000 0 0	  0x28000000 0 0x00010000
-				  0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
+			ranges = <0x81000000 0 0	  0x28000000 0 0x00010000>,
+				 <0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
 
 			phys = <&pcie0_phy>;
 			phy-names = "pcie-phy";
@@ -283,7 +285,7 @@
 			status = "disabled";
 
 			msi-parent = <&msi0>;
-			msi0: msi-controller {
+			msi0: msi {
 				compatible = "brcm,iproc-msi";
 				msi-controller;
 				interrupt-parent = <&gic>;
@@ -309,8 +311,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
-			ranges = <0x81000000 0 0	  0x48000000 0 0x00010000
-				  0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
+			ranges = <0x81000000 0 0	  0x48000000 0 0x00010000>,
+				 <0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
 
 			phys = <&pcie1_phy>;
 			phy-names = "pcie-phy";
@@ -318,7 +320,7 @@
 			status = "disabled";
 
 			msi-parent = <&msi1>;
-			msi1: msi-controller {
+			msi1: msi {
 				compatible = "brcm,iproc-msi";
 				msi-controller;
 				interrupt-parent = <&gic>;
@@ -397,8 +399,8 @@
 			#size-cells = <0>;
 			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-0 = <&spi_0>;
-			clocks = <&axi81_clk>;
-			clock-names = "apb_pclk";
+			clocks = <&axi81_clk>, <&axi81_clk>;
+			clock-names = "sspclk", "apb_pclk";
 			status = "disabled";
 		};
 
@@ -409,8 +411,8 @@
 			#size-cells = <0>;
 			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-0 = <&spi_1>;
-			clocks = <&axi81_clk>;
-			clock-names = "apb_pclk";
+			clocks = <&axi81_clk>, <&axi81_clk>;
+			clock-names = "sspclk", "apb_pclk";
 			status = "disabled";
 		};
 
@@ -421,8 +423,8 @@
 			#size-cells = <0>;
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-0 = <&spi_2>;
-			clocks = <&axi81_clk>;
-			clock-names = "apb_pclk";
+			clocks = <&axi81_clk>, <&axi81_clk>;
+			clock-names = "sspclk", "apb_pclk";
 			status = "disabled";
 		};
 
@@ -518,6 +520,7 @@
 			gpio-controller;
 
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-ranges = <&pinctrl 0 42 1>,
 					<&pinctrl 1 44 3>,
diff --git a/arch/arm/boot/dts/bcm-hr2.dtsi b/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi
index 84cda16f68a2..75545b10ef2f 100644
--- a/arch/arm/boot/dts/bcm-hr2.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi
@@ -54,8 +54,8 @@
 
 	pmu {
 		compatible = "arm,cortex-a9-pmu";
-		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-affinity = <&cpu0>;
 	};
 
@@ -200,6 +200,7 @@
 			gpio-controller;
 			ngpios = <4>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
@@ -318,7 +319,7 @@
 		status = "disabled";
 
 		msi-parent = <&msi0>;
-		msi0: msi-controller {
+		msi0: msi {
 			compatible = "brcm,iproc-msi";
 			msi-controller;
 			interrupt-parent = <&gic>;
@@ -354,7 +355,7 @@
 		status = "disabled";
 
 		msi-parent = <&msi1>;
-		msi1: msi-controller {
+		msi1: msi {
 			compatible = "brcm,iproc-msi";
 			msi-controller;
 			interrupt-parent = <&gic>;
diff --git a/arch/arm/boot/dts/broadcom/bcm-ns.dtsi b/arch/arm/boot/dts/broadcom/bcm-ns.dtsi
new file mode 100644
index 000000000000..d0d5f7e52a91
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm-ns.dtsi
@@ -0,0 +1,516 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2013-2014 Hauke Mehrtens <hauke@hauke-m.de>
+ */
+
+#include <dt-bindings/clock/bcm-nsp.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts =
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	chipcommon-a-bus@18000000 {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x18000000 0x00001000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		uart0: serial@300 {
+			compatible = "ns16550";
+			reg = <0x0300 0x100>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>;
+			status = "disabled";
+		};
+
+		uart1: serial@400 {
+			compatible = "ns16550";
+			reg = <0x0400 0x100>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinmux_uart1>;
+			status = "disabled";
+		};
+	};
+
+	mpcore-bus@19000000 {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x19000000 0x00023000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		scu@20000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0x20000 0x100>;
+		};
+
+		timer@20200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x20200 0x100>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&periph_clk>;
+		};
+
+		timer@20600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x20600 0x20>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_EDGE_RISING)>;
+			clocks = <&periph_clk>;
+		};
+
+		gic: interrupt-controller@21000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x21000 0x1000>,
+			      <0x20100 0x100>;
+		};
+
+		L2: cache-controller@22000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x22000 0x1000>;
+			cache-unified;
+			arm,shared-override;
+			prefetch-data = <1>;
+			prefetch-instr = <1>;
+			cache-level = <2>;
+		};
+	};
+
+	axi@18000000 {
+		compatible = "brcm,bus-axi";
+		reg = <0x18000000 0x1000>;
+		ranges = <0x00000000 0x18000000 0x00100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0x000fffff 0xffff>;
+		interrupt-map =
+			/* ChipCommon */
+			<0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* Switch Register Access Block */
+			<0x00007000 0 &gic GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 1 &gic GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 2 &gic GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 3 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 4 &gic GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 5 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 6 &gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 7 &gic GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 8 &gic GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 9 &gic GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 10 &gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 11 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 12 &gic GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* PCIe Controller 0 */
+			<0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* PCIe Controller 1 */
+			<0x00013000 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00013000 1 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00013000 2 &gic GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00013000 3 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00013000 4 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00013000 5 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* PCIe Controller 2 */
+			<0x00014000 0 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00014000 1 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00014000 2 &gic GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00014000 3 &gic GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00014000 4 &gic GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00014000 5 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* USB 2.0 Controller */
+			<0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* USB 3.0 Controller */
+			<0x00023000 0 &gic GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* Ethernet Controller 0 */
+			<0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* Ethernet Controller 1 */
+			<0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* Ethernet Controller 2 */
+			<0x00026000 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* Ethernet Controller 3 */
+			<0x00027000 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* NAND Controller */
+			<0x00028000 0 &gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00028000 1 &gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00028000 2 &gic GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00028000 3 &gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00028000 4 &gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00028000 5 &gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+
+		chipcommon: chipcommon@0 {
+			reg = <0x00000000 0x1000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pcie0: pcie@12000 {
+			reg = <0x00012000 0x1000>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+		};
+
+		pcie1: pcie@13000 {
+			reg = <0x00013000 0x1000>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+		};
+
+		pcie2: pcie@14000 {
+			reg = <0x00014000 0x1000>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+		};
+
+		usb2: usb2@21000 {
+			reg = <0x00021000 0x1000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			interrupt-parent = <&gic>;
+
+			ehci: usb@21000 {
+				compatible = "generic-ehci";
+				reg = <0x00021000 0x1000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb2_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ehci_port1: port@1 {
+					reg = <1>;
+					#trigger-source-cells = <0>;
+				};
+
+				ehci_port2: port@2 {
+					reg = <2>;
+					#trigger-source-cells = <0>;
+				};
+			};
+
+			ohci: usb@22000 {
+				compatible = "generic-ohci";
+				reg = <0x00022000 0x1000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ohci_port1: port@1 {
+					reg = <1>;
+					#trigger-source-cells = <0>;
+				};
+
+				ohci_port2: port@2 {
+					reg = <2>;
+					#trigger-source-cells = <0>;
+				};
+			};
+		};
+
+		usb3: usb3@23000 {
+			reg = <0x00023000 0x1000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			interrupt-parent = <&gic>;
+
+			xhci: usb@23000 {
+				compatible = "generic-xhci";
+				reg = <0x00023000 0x1000>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb3_phy>;
+				phy-names = "usb";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				xhci_port1: port@1 {
+					reg = <1>;
+					#trigger-source-cells = <0>;
+				};
+			};
+		};
+
+		gmac0: ethernet@24000 {
+			reg = <0x24000 0x800>;
+			phy-mode = "internal";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		gmac1: ethernet@25000 {
+			reg = <0x25000 0x800>;
+			phy-mode = "internal";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		gmac2: ethernet@26000 {
+			reg = <0x26000 0x800>;
+			phy-mode = "internal";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		gmac3: ethernet@27000 {
+			reg = <0x27000 0x800>;
+		};
+	};
+
+	pwm: pwm@18002000 {
+		compatible = "brcm,iproc-pwm";
+		reg = <0x18002000 0x28>;
+		clocks = <&osc>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	mdio: mdio@18003000 {
+		compatible = "brcm,iproc-mdio";
+		reg = <0x18003000 0x8>;
+		#size-cells = <0>;
+		#address-cells = <1>;
+	};
+
+	mdio-mux@18003000 {
+		compatible = "mdio-mux-mmioreg", "mdio-mux";
+		mdio-parent-bus = <&mdio>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x18003000 0x4>;
+		mux-mask = <0x200>;
+
+		mdio@0 {
+			reg = <0x0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			usb3_phy: usb3-phy@10 {
+				compatible = "brcm,ns-ax-usb3-phy";
+				reg = <0x10>;
+				usb3-dmp-syscon = <&usb3_dmp>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+	};
+
+	rng: rng@18004000 {
+		compatible = "brcm,bcm5301x-rng";
+		reg = <0x18004000 0x14>;
+	};
+
+	srab: ethernet-switch@18007000 {
+		compatible = "brcm,bcm53011-srab", "brcm,bcm5301x-srab";
+		reg = <0x18007000 0x1000>;
+
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+			};
+
+			port@1 {
+				reg = <1>;
+			};
+
+			port@2 {
+				reg = <2>;
+			};
+
+			port@3 {
+				reg = <3>;
+			};
+
+			port@4 {
+				reg = <4>;
+			};
+
+			port@5 {
+				reg = <5>;
+				ethernet = <&gmac0>;
+			};
+
+			port@7 {
+				reg = <7>;
+				ethernet = <&gmac1>;
+			};
+
+			port@8 {
+				reg = <8>;
+				ethernet = <&gmac2>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+
+	uart2: serial@18008000 {
+		compatible = "ns16550a";
+		reg = <0x18008000 0x20>;
+		clocks = <&iprocslow>;
+		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	dmu-bus@1800c000 {
+		compatible = "simple-bus";
+		ranges = <0 0x1800c000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		cru-bus@100 {
+			compatible = "brcm,ns-cru", "simple-mfd";
+			reg = <0x100 0x1a4>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			usb2_phy: phy@164 {
+				compatible = "brcm,ns-usb2-phy";
+				reg = <0x164 0x4>;
+				brcm,syscon-clkset = <&cru_clkset>;
+				clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
+				clock-names = "phy-ref-clk";
+				#phy-cells = <0>;
+			};
+
+			cru_clkset: syscon@180 {
+				compatible = "brcm,cru-clkset", "syscon";
+				reg = <0x180 0x4>;
+			};
+
+			pinctrl: pinctrl@1c0 {
+				compatible = "brcm,bcm4708-pinmux";
+				reg = <0x1c0 0x24>;
+				reg-names = "cru_gpio_control";
+
+				spi-pins {
+					groups = "spi_grp";
+					function = "spi";
+				};
+
+				pinmux_i2c: i2c-pins {
+					groups = "i2c_grp";
+					function = "i2c";
+				};
+
+				pinmux_pwm: pwm-pins {
+					groups = "pwm0_grp", "pwm1_grp",
+						 "pwm2_grp", "pwm3_grp";
+					function = "pwm";
+				};
+
+				pinmux_uart1: uart1-pins {
+					groups = "uart1_grp";
+					function = "uart1";
+				};
+			};
+
+			thermal: thermal@2c0 {
+				compatible = "brcm,ns-thermal";
+				reg = <0x2c0 0x10>;
+				#thermal-sensor-cells = <0>;
+			};
+		};
+	};
+
+	nand_controller: nand-controller@18028000 {
+		compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
+		reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;
+		reg-names = "nand", "iproc-idm", "iproc-ext";
+		interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		brcm,nand-has-wp;
+	};
+
+	usb3_dmp: syscon@18105000 {
+		reg = <0x18105000 0x1000>;
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+			coefficients = <(-556) 418000>;
+			thermal-sensors = <&thermal>;
+
+			trips {
+				cpu-crit {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm-nsp-ax.dtsi b/arch/arm/boot/dts/broadcom/bcm-nsp-ax.dtsi
new file mode 100644
index 000000000000..f2e941dbab10
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm-nsp-ax.dtsi
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom Northstar Plus Ax stepping-specific bindings.
+ * Notable differences from B0+ are the secondary-boot-reg and
+ * lack of DMA coherency.
+ */
+
+&cpu1 {
+	secondary-boot-reg = <0xffff042c>;
+};
+
+&dma {
+	/delete-property/ dma-coherent;
+};
+
+&sdio {
+	/delete-property/ dma-coherent;
+};
+
+&amac0 {
+	/delete-property/ dma-coherent;
+};
+
+&amac1 {
+	/delete-property/ dma-coherent;
+};
+
+&amac2 {
+	/delete-property/ dma-coherent;
+};
+
+&ehci0 {
+	/delete-property/ dma-coherent;
+};
+
+&mailbox {
+	/delete-property/ dma-coherent;
+};
+
+&xhci {
+	/delete-property/ dma-coherent;
+};
+
+&ehci0 {
+	/delete-property/ dma-coherent;
+};
+
+&ohci0 {
+	/delete-property/ dma-coherent;
+};
+
+&i2c0 {
+	/delete-property/ dma-coherent;
+};
+
+&sata {
+	/delete-property/ dma-coherent;
+};
+
+&pcie0 {
+	/delete-property/ dma-coherent;
+};
+
+&pcie1 {
+	/delete-property/ dma-coherent;
+};
+
+&pcie2 {
+	/delete-property/ dma-coherent;
+};
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi
index 748df7955ae6..6a4482c93167 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi
@@ -72,12 +72,12 @@
 
 	pmu {
 		compatible = "arm,cortex-a9-pmu";
-		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-affinity = <&cpu0>, <&cpu1>;
 	};
 
-	mpcore@19000000 {
+	mpcore-bus@19000000 {
 		compatible = "simple-bus";
 		ranges = <0x00000000 0x19000000 0x00023000>;
 		#address-cells = <1>;
@@ -166,7 +166,7 @@
 		};
 	};
 
-	axi@18000000 {
+	axi: axi@18000000 {
 		compatible = "simple-bus";
 		ranges = <0x00000000 0x18000000 0x0011c40c>;
 		#address-cells = <1>;
@@ -180,6 +180,7 @@
 			gpio-controller;
 			ngpios = <32>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-ranges = <&pinctrl 0 0 32>;
 		};
@@ -219,7 +220,7 @@
 			status = "disabled";
 		};
 
-		sdio: sdhci@21000 {
+		sdio: mmc@21000 {
 			compatible = "brcm,sdhci-iproc-cygnus";
 			reg = <0x21000 0x100>;
 			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
@@ -310,6 +311,7 @@
 			num-cs = <2>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			status = "disabled";
 		};
 
 		xhci: usb@29000 {
@@ -351,6 +353,7 @@
 			gpio-controller;
 			ngpios = <4>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
@@ -362,6 +365,42 @@
 			status = "disabled";
 		};
 
+		mdio: mdio@32000 {
+			compatible = "brcm,iproc-mdio";
+			reg = <0x32000 0x8>;
+			#size-cells = <0>;
+			#address-cells = <1>;
+		};
+
+		mdio-mux@32000 {
+			compatible = "mdio-mux-mmioreg", "mdio-mux";
+			reg = <0x32000 0x4>;
+			mux-mask = <0x200>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			mdio-parent-bus = <&mdio>;
+
+			mdio_int: mdio@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				usb3_phy: usb3-phy@10 {
+					compatible = "brcm,ns-bx-usb3-phy";
+					reg = <0x10>;
+					usb3-dmp-syscon = <&usb3_dmp>;
+					#phy-cells = <0>;
+					status = "disabled";
+				};
+			};
+
+			mdio_ext: mdio@200 {
+				reg = <0x200>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		rng: rng@33000 {
 			compatible = "brcm,bcm-nsp-rng";
 			reg = <0x33000 0x14>;
@@ -497,7 +536,7 @@
 			};
 		};
 
-		sata: ahci@41000 {
+		sata: sata@41000 {
 			compatible = "brcm,bcm-nsp-ahci";
 			reg-names = "ahci", "top-ctrl";
 			reg = <0x41000 0x1000>, <0x40020 0x1c>;
@@ -520,13 +559,8 @@
 			};
 		};
 
-		usb3_phy: usb3-phy@104000 {
-			compatible = "brcm,ns-bx-usb3-phy";
-			reg = <0x104000 0x1000>,
-			      <0x032000 0x1000>;
-			reg-names = "dmp", "ccb-mii";
-			#phy-cells = <0>;
-			status = "disabled";
+		usb3_dmp: syscon@104000 {
+			reg = <0x104000 0x1000>;
 		};
 	};
 
@@ -555,7 +589,7 @@
 		status = "disabled";
 
 		msi-parent = <&msi0>;
-		msi0: msi-controller {
+		msi0: msi {
 			compatible = "brcm,iproc-msi";
 			msi-controller;
 			interrupt-parent = <&gic>;
@@ -592,7 +626,7 @@
 		status = "disabled";
 
 		msi-parent = <&msi1>;
-		msi1: msi-controller {
+		msi1: msi {
 			compatible = "brcm,iproc-msi";
 			msi-controller;
 			interrupt-parent = <&gic>;
@@ -629,7 +663,7 @@
 		status = "disabled";
 
 		msi-parent = <&msi2>;
-		msi2: msi-controller {
+		msi2: msi {
 			compatible = "brcm,iproc-msi";
 			msi-controller;
 			interrupt-parent = <&gic>;
diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/broadcom/bcm11351.dtsi
index 6197e7d80e3b..53857e572080 100644
--- a/arch/arm/boot/dts/bcm11351.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm11351.dtsi
@@ -1,21 +1,10 @@
-/*
- * Copyright (C) 2012-2013 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2012-2013 Broadcom Corporation
 
+#include <dt-bindings/clock/bcm281xx.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
-#include "dt-bindings/clock/bcm281xx.h"
-
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
@@ -60,44 +49,44 @@
 		reg = <0x3404c000 0x400>; /* 1 KiB in SRAM */
 	};
 
-	uart@3e000000 {
+	uartb: serial@3e000000 {
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
 		reg = <0x3e000000 0x1000>;
 		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB>;
 		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
+		status = "disabled";
 	};
 
-	uart@3e001000 {
+	uartb2: serial@3e001000 {
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
 		reg = <0x3e001000 0x1000>;
 		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB2>;
 		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
+		status = "disabled";
 	};
 
-	uart@3e002000 {
+	uartb3: serial@3e002000 {
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
 		reg = <0x3e002000 0x1000>;
 		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>;
 		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
+		status = "disabled";
 	};
 
-	uart@3e003000 {
+	uartb4: serial@3e003000 {
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
 		reg = <0x3e003000 0x1000>;
 		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB4>;
 		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
+		status = "disabled";
 	};
 
 	L2: l2-cache@3ff20000 {
@@ -122,20 +111,19 @@
 	gpio: gpio@35003000 {
 		compatible = "brcm,bcm11351-gpio", "brcm,kona-gpio";
 		reg = <0x35003000 0x800>;
-		interrupts =
-		       <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		#interrupt-cells = <2>;
 		gpio-controller;
 		interrupt-controller;
 	};
 
-	sdio1: sdio@3f180000 {
+	sdio1: mmc@3f180000 {
 		compatible = "brcm,kona-sdhci";
 		reg = <0x3f180000 0x10000>;
 		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
@@ -143,7 +131,7 @@
 		status = "disabled";
 	};
 
-	sdio2: sdio@3f190000 {
+	sdio2: mmc@3f190000 {
 		compatible = "brcm,kona-sdhci";
 		reg = <0x3f190000 0x10000>;
 		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
@@ -151,7 +139,7 @@
 		status = "disabled";
 	};
 
-	sdio3: sdio@3f1a0000 {
+	sdio3: mmc@3f1a0000 {
 		compatible = "brcm,kona-sdhci";
 		reg = <0x3f1a0000 0x10000>;
 		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
@@ -159,7 +147,7 @@
 		status = "disabled";
 	};
 
-	sdio4: sdio@3f1b0000 {
+	sdio4: mmc@3f1b0000 {
 		compatible = "brcm,kona-sdhci";
 		reg = <0x3f1b0000 0x10000>;
 		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
@@ -172,7 +160,7 @@
 		reg = <0x35004800 0x430>;
 	};
 
-	i2c@3e016000 {
+	bsc1: i2c@3e016000 {
 		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
 		reg = <0x3e016000 0x80>;
 		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
@@ -182,7 +170,7 @@
 		status = "disabled";
 	};
 
-	i2c@3e017000 {
+	bsc2: i2c@3e017000 {
 		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
 		reg = <0x3e017000 0x80>;
 		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
@@ -192,7 +180,7 @@
 		status = "disabled";
 	};
 
-	i2c@3e018000 {
+	bsc3: i2c@3e018000 {
 		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
 		reg = <0x3e018000 0x80>;
 		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
@@ -202,7 +190,7 @@
 		status = "disabled";
 	};
 
-	i2c@3500d000 {
+	pmu_bsc: i2c@3500d000 {
 		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
 		reg = <0x3500d000 0x80>;
 		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/broadcom/bcm21664-garnet.dts b/arch/arm/boot/dts/broadcom/bcm21664-garnet.dts
new file mode 100644
index 000000000000..4f8ddc1b3ab7
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm21664-garnet.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2014 Broadcom Corporation
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "bcm21664.dtsi"
+
+/ {
+	model = "BCM21664 Garnet board";
+	compatible = "brcm,bcm21664-garnet", "brcm,bcm21664";
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>; /* 1 GB */
+	};
+};
+
+&sdio1 {
+	max-frequency = <48000000>;
+	status = "okay";
+};
+
+&sdio2 {
+	non-removable;
+	max-frequency = <48000000>;
+	status = "okay";
+};
+
+&sdio4 {
+	max-frequency = <48000000>;
+	cd-gpios = <&gpio 91 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&uartb {
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm21664.dtsi b/arch/arm/boot/dts/broadcom/bcm21664.dtsi
new file mode 100644
index 000000000000..f0d0300079b6
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm21664.dtsi
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2014 Broadcom Corporation
+
+#include "bcm2166x-common.dtsi"
+
+/ {
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			enable-method = "brcm,bcm11351-cpu-method";
+			secondary-boot-reg = <0x35004178>;
+			reg = <1>;
+		};
+	};
+};
+
+&apps {
+		gic: interrupt-controller@1c01000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x01c01000 0x1000>,
+				  <0x01c00100 0x100>;
+		};
+
+		L2: cache-controller@1c20000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x01c20000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+};
+
+&bsc1 {
+	compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
+};
+
+&bsc2 {
+	compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
+};
+
+&bsc3 {
+	compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
+};
+
+&bsc4 {
+	compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
+};
+
+&gpio {
+	compatible = "brcm,bcm21664-gpio", "brcm,kona-gpio";
+};
+
+&smc {
+	compatible = "brcm,bcm21664-smc", "brcm,kona-smc";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2166x-common.dtsi b/arch/arm/boot/dts/broadcom/bcm2166x-common.dtsi
new file mode 100644
index 000000000000..f535212cb52f
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2166x-common.dtsi
@@ -0,0 +1,341 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Common device tree for components shared between the BCM21664 and BCM23550
+ * SoCs.
+ *
+ * Copyright (C) 2016 Broadcom
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/clock/bcm21664.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	/* Hub bus */
+	hub: hub-bus@34000000 {
+		compatible = "simple-bus";
+		ranges = <0 0x34000000 0x102f83ac>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		smc: smc@4e000 {
+			/* Compatible filled by SoC DTSI */
+			reg = <0x0004e000 0x400>; /* 1 KiB in SRAM */
+		};
+
+		resetmgr: reset-controller@1001f00 {
+			compatible = "brcm,bcm21664-resetmgr";
+			reg = <0x01001f00 0x24>;
+		};
+
+		gpio: gpio@1003000 {
+			/* Compatible filled by SoC DTSI */
+			reg = <0x01003000 0x524>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+		};
+
+		pinctrl: pinctrl@1004800 {
+			compatible = "brcm,bcm21664-pinctrl";
+			reg = <0x01004800 0x7f4>;
+		};
+
+		timer@1006000 {
+			compatible = "brcm,kona-timer";
+			reg = <0x01006000 0x1c>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>;
+		};
+	};
+
+	/* Slaves bus */
+	slaves: slaves-bus@3e000000 {
+		compatible = "simple-bus";
+		ranges = <0 0x3e000000 0x0001c070>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		uartb: serial@0 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x00000000 0x118>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uartb2: serial@1000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x00001000 0x118>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uartb3: serial@2000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x00002000 0x118>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		bsc1: i2c@16000 {
+			/* Compatible filled by SoC DTSI */
+			reg = <0x00016000 0x70>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>;
+			status = "disabled";
+		};
+
+		bsc2: i2c@17000 {
+			/* Compatible filled by SoC DTSI */
+			reg = <0x00017000 0x70>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>;
+			status = "disabled";
+		};
+
+		bsc3: i2c@18000 {
+			/* Compatible filled by SoC DTSI */
+			reg = <0x00018000 0x70>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>;
+			status = "disabled";
+		};
+
+		bsc4: i2c@1c000 {
+			/* Compatible filled by SoC DTSI */
+			reg = <0x0001c000 0x70>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>;
+			status = "disabled";
+		};
+	};
+
+	/* Apps bus */
+	apps: apps-bus@3e300000 {
+		compatible = "simple-bus";
+		ranges = <0 0x3e300000 0x01c02000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		usbotg: usb@e20000 {
+			compatible = "snps,dwc2";
+			reg = <0x00e20000 0x10000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_otg_ahb_clk>;
+			clock-names = "otg";
+			phys = <&usbphy>;
+			phy-names = "usb2-phy";
+			status = "disabled";
+		};
+
+		usbphy: usb-phy@e30000 {
+			compatible = "brcm,kona-usb2-phy";
+			reg = <0x00e30000 0x28>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		sdio1: mmc@e80000 {
+			compatible = "brcm,kona-sdhci";
+			reg = <0x00e80000 0x801c>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>;
+			status = "disabled";
+		};
+
+		sdio2: mmc@e90000 {
+			compatible = "brcm,kona-sdhci";
+			reg = <0x00e90000 0x801c>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>;
+			status = "disabled";
+		};
+
+		sdio3: mmc@ea0000 {
+			compatible = "brcm,kona-sdhci";
+			reg = <0x00ea0000 0x801c>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>;
+			status = "disabled";
+		};
+
+		sdio4: mmc@eb0000 {
+			compatible = "brcm,kona-sdhci";
+			reg = <0x00eb0000 0x801c>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>;
+			status = "disabled";
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/*
+		 * Fixed clocks are defined before CCUs whose
+		 * clocks may depend on them.
+		 */
+
+		ref_32k_clk: ref_32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		bbl_32k_clk: bbl_32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		ref_13m_clk: ref_13m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+		};
+
+		var_13m_clk: var_13m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+		};
+
+		dft_19_5m_clk: dft_19_5m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <19500000>;
+		};
+
+		ref_crystal_clk: ref_crystal {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <26000000>;
+		};
+
+		ref_52m_clk: ref_52m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		var_52m_clk: var_52m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		usb_otg_ahb_clk: usb_otg_ahb {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		ref_96m_clk: ref_96m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <96000000>;
+		};
+
+		var_96m_clk: var_96m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <96000000>;
+		};
+
+		ref_104m_clk: ref_104m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <104000000>;
+		};
+
+		var_104m_clk: var_104m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <104000000>;
+		};
+
+		ref_156m_clk: ref_156m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <156000000>;
+		};
+
+		var_156m_clk: var_156m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <156000000>;
+		};
+
+		root_ccu: root_ccu@35001000 {
+			compatible = "brcm,bcm21664-root-ccu";
+			reg = <0x35001000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "frac_1m";
+		};
+
+		aon_ccu: aon_ccu@35002000 {
+			compatible = "brcm,bcm21664-aon-ccu";
+			reg = <0x35002000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "hub_timer";
+		};
+
+		slave_ccu: slave_ccu@3e011000 {
+			compatible = "brcm,bcm21664-slave-ccu";
+			reg = <0x3e011000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "uartb",
+					     "uartb2",
+					     "uartb3",
+					     "bsc1",
+					     "bsc2",
+					     "bsc3",
+					     "bsc4";
+		};
+
+		master_ccu: master_ccu@3f001000 {
+			compatible = "brcm,bcm21664-master-ccu";
+			reg = <0x3f001000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "sdio1",
+					     "sdio2",
+					     "sdio3",
+					     "sdio4",
+					     "sdio1_sleep",
+					     "sdio2_sleep",
+					     "sdio3_sleep",
+					     "sdio4_sleep";
+		};
+	};
+};
+
+#include "bcm2166x-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/broadcom/bcm2166x-pinctrl.dtsi b/arch/arm/boot/dts/broadcom/bcm2166x-pinctrl.dtsi
new file mode 100644
index 000000000000..51b8730c8fee
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2166x-pinctrl.dtsi
@@ -0,0 +1,297 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Common pinmux configrations for BCM2166x (BCM21664/BCM23550).
+ *
+ * Copyright (C) 2025 Artur Weber <aweber.kernel@gmail.com>
+ */
+
+&pinctrl {
+	/* BSC1 */
+	bsc1_pins: bsc1-pins {
+		bsc1clk-grp0 {
+			pins = "bsc1clk";
+			function = "alt1"; /* BSC1CLK */
+		};
+
+		bsc1dat-grp0 {
+			pins = "bsc1dat";
+			function = "alt1"; /* BSC1DAT */
+		};
+	};
+
+	/* BSC2 */
+	bsc2_pins: bsc2-pins {
+		bsc2clk-grp0 {
+			pins = "gpio16";
+			function = "alt2"; /* BSC2CLK */
+		};
+
+		bsc2dat-grp0 {
+			pins = "gpio17";
+			function = "alt2"; /* BSC2DAT */
+		};
+	};
+
+	/* BSC3 */
+	bsc3_pins: bsc3-pins {
+		bsc3clk-grp0 {
+			pins = "lcdscl";
+			function = "alt1"; /* BSC3_CLK */
+		};
+
+		bsc3dat-grp0 {
+			pins = "lcdsda";
+			function = "alt1"; /* BSC3_SDA */
+		};
+	};
+
+	/* BSC4 */
+	bsc4_pins: bsc4-pins {
+		bsc4clk-grp0 {
+			pins = "lcdres";
+			function = "alt1"; /* BSC4_CLK */
+		};
+
+		bsc4dat-grp0 {
+			pins = "lcdte";
+			function = "alt1"; /* BSC4_SDA */
+		};
+	};
+
+	/* PMBSC */
+	pmbsc_pins: pmbsc-pins {
+		pmbscclk-grp0 {
+			pins = "pmbscclk";
+			function = "alt1"; /* PMBSCCLK */
+		};
+
+		pmbscdat-grp0 {
+			pins = "pmbscdat";
+			function = "alt1"; /* PMBSCDAT */
+		};
+	};
+
+	/* SD */
+	sd_width1_pins: sd-width1-pins {
+		sdck-grp0 {
+			pins = "sdck";
+			function = "alt1"; /* SDCK */
+			bias-disable;
+		};
+
+		sdcmd-grp0 {
+			pins = "sdcmd";
+			function = "alt1"; /* SDCMD */
+			bias-pull-up;
+		};
+
+		sddat-grp0 {
+			pins = "sddat0";
+			function = "alt1"; /* SDDATx */
+			bias-pull-up;
+		};
+	};
+
+	sd_width4_pins: sd-width4-pins {
+		sdck-grp0 {
+			pins = "sdck";
+			function = "alt1"; /* SDCK */
+			bias-disable;
+		};
+
+		sdcmd-grp0 {
+			pins = "sdcmd";
+			function = "alt1"; /* SDCMD */
+			bias-pull-up;
+		};
+
+		sddat-grp0 {
+			pins = "sddat0", "sddat1", "sddat2", "sddat3";
+			function = "alt1"; /* SDDATx */
+			bias-pull-up;
+		};
+	};
+
+	/* SD1 */
+	sd1_width1_pins: sd1-width1-pins {
+		sd1ck-grp0 {
+			pins = "mmc1dat7";
+			function = "alt6"; /* SD1CK */
+			bias-disable;
+		};
+
+		sd1cmd-grp0 {
+			pins = "spi0txd";
+			function = "alt2"; /* SD1CMD */
+			bias-pull-up;
+		};
+
+		sd1dat0-grp0 {
+			pins = "mmc1dat5";
+			function = "alt6"; /* SD1DAT0 */
+			bias-pull-up;
+		};
+	};
+
+	sd1_width4_pins: sd1-width4-pins {
+		sd1ck-grp0 {
+			pins = "mmc1dat7";
+			function = "alt6"; /* SD1CK */
+			bias-disable;
+		};
+
+		sd1cmd-grp0 {
+			pins = "spi0txd";
+			function = "alt2"; /* SD1CMD */
+			bias-pull-up;
+		};
+
+		sd1dat0-grp0 {
+			pins = "mmc1dat5";
+			function = "alt6"; /* SD1DAT0 */
+			bias-pull-up;
+		};
+
+		sd1dat1-grp0 {
+			pins = "gpio93";
+			function = "alt1"; /* SD1DAT1 */
+			bias-pull-up;
+		};
+
+		sd1dat2-grp0 {
+			pins = "gpio94";
+			function = "alt1"; /* SD1DAT2 */
+			bias-pull-up;
+		};
+
+		sd1dat3-grp0 {
+			pins = "mmc1dat3";
+			function = "alt6"; /* SD1DAT3 */
+			bias-pull-up;
+		};
+	};
+
+	/* MMC0 */
+	mmc0_width1_pins: mmc0-width1-pins {
+		mmc0ck-grp0 {
+			pins = "mmc0ck";
+			function = "alt1"; /* MMC0CK */
+			bias-disable;
+		};
+
+		mmc0cmd-grp0 {
+			pins = "mmc0cmd";
+			function = "alt1"; /* MMC0CMD */
+			bias-pull-up;
+		};
+
+		mmc0dat-grp0 {
+			pins = "mmc0dat0";
+			function = "alt1"; /* MMC0DATx */
+			bias-pull-up;
+		};
+	};
+
+	mmc0_width4_pins: mmc0-width4-pins {
+		mmc0ck-grp0 {
+			pins = "mmc0ck";
+			function = "alt1"; /* MMC0CK */
+			bias-disable;
+		};
+
+		mmc0cmd-grp0 {
+			pins = "mmc0cmd";
+			function = "alt1"; /* MMC0CMD */
+			bias-pull-up;
+		};
+
+		mmc0dat-grp0 {
+			pins = "mmc0dat0", "mmc0dat1", "mmc0dat2", "mmc0dat3";
+			function = "alt1"; /* MMC0DATx */
+			bias-pull-up;
+		};
+	};
+
+	mmc0_width8_pins: mmc0-width8-pins {
+		mmc0ck-grp0 {
+			pins = "mmc0ck";
+			function = "alt1"; /* MMC0CK */
+			bias-disable;
+		};
+
+		mmc0cmd-grp0 {
+			pins = "mmc0cmd";
+			function = "alt1"; /* MMC0CMD */
+			bias-pull-up;
+		};
+
+		mmc0dat-grp0 {
+			pins = "mmc0dat0", "mmc0dat1", "mmc0dat2", "mmc0dat3",
+			       "mmc0dat4", "mmc0dat5", "mmc0dat6", "mmc0dat7";
+			function = "alt1"; /* MMC0DATx */
+			bias-pull-up;
+		};
+	};
+
+	/* MMC1 */
+	mmc1_width1_pins: mmc1-width1-pins {
+		mmc1ck-grp0 {
+			pins = "mmc1ck";
+			function = "alt1"; /* MMC1CK */
+			bias-disable;
+		};
+
+		mmc1cmd-grp0 {
+			pins = "mmc1cmd";
+			function = "alt1"; /* MMC1CMD */
+			bias-pull-up;
+		};
+
+		mmc1dat-grp0 {
+			pins = "mmc1dat0";
+			function = "alt1"; /* MMC1DATx */
+			bias-pull-up;
+		};
+	};
+
+	mmc1_width4_pins: mmc1-width4-pins {
+		mmc1ck-grp0 {
+			pins = "mmc1ck";
+			function = "alt1"; /* MMC1CK */
+			bias-disable;
+		};
+
+		mmc1cmd-grp0 {
+			pins = "mmc1cmd";
+			function = "alt1"; /* MMC1CMD */
+			bias-pull-up;
+		};
+
+		mmc1dat-grp0 {
+			pins = "mmc1dat0", "mmc1dat1", "mmc1dat2", "mmc1dat3";
+			function = "alt1"; /* MMC1DATx */
+			bias-pull-up;
+		};
+	};
+
+	mmc1_width8_pins: mmc1-width8-pins {
+		mmc1ck-grp0 {
+			pins = "mmc1ck";
+			function = "alt1"; /* MMC1CK */
+			bias-disable;
+		};
+
+		mmc1cmd-grp0 {
+			pins = "mmc1cmd";
+			function = "alt1"; /* MMC1CMD */
+			bias-pull-up;
+		};
+
+		mmc1dat-grp0 {
+			pins = "mmc1dat0", "mmc1dat1", "mmc1dat2", "mmc1dat3",
+			       "mmc1dat4", "mmc1dat5", "mmc1dat6", "mmc1dat7";
+			function = "alt1"; /* MMC1DATx */
+			bias-pull-up;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm23550-sparrow.dts b/arch/arm/boot/dts/broadcom/bcm23550-sparrow.dts
index ace77709f468..ace77709f468 100644
--- a/arch/arm/boot/dts/bcm23550-sparrow.dts
+++ b/arch/arm/boot/dts/broadcom/bcm23550-sparrow.dts
diff --git a/arch/arm/boot/dts/broadcom/bcm23550.dtsi b/arch/arm/boot/dts/broadcom/bcm23550.dtsi
new file mode 100644
index 000000000000..c1c69381286b
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm23550.dtsi
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Device tree for the BCM23550 SoC.
+ *
+ * Copyright (C) 2016 Broadcom
+ */
+
+#include "bcm2166x-common.dtsi"
+
+/ {
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0>;
+			clock-frequency = <1000000000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			enable-method = "brcm,bcm23550";
+			secondary-boot-reg = <0x35004178>;
+			reg = <1>;
+			clock-frequency = <1000000000>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			enable-method = "brcm,bcm23550";
+			secondary-boot-reg = <0x35004178>;
+			reg = <2>;
+			clock-frequency = <1000000000>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			enable-method = "brcm,bcm23550";
+			secondary-boot-reg = <0x35004178>;
+			reg = <3>;
+			clock-frequency = <1000000000>;
+		};
+	};
+};
+
+&apps {
+		cdc: cdc@1b0e000 {
+			compatible = "brcm,bcm23550-cdc";
+			reg = <0x01b0e000 0x78>;
+		};
+
+		gic: interrupt-controller@1b21000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x01b21000 0x1000>,
+			      <0x01b22000 0x1000>;
+		};
+};
+
+&bsc1 {
+	compatible = "brcm,bcm23550-i2c", "brcm,kona-i2c";
+};
+
+&bsc2 {
+	compatible = "brcm,bcm23550-i2c", "brcm,kona-i2c";
+};
+
+&bsc3 {
+	compatible = "brcm,bcm23550-i2c", "brcm,kona-i2c";
+};
+
+&bsc4 {
+	compatible = "brcm,bcm23550-i2c", "brcm,kona-i2c";
+};
+
+&gpio {
+	compatible = "brcm,bcm23550-gpio", "brcm,kona-gpio";
+};
+
+&smc {
+	compatible = "brcm,bcm23550-smc", "brcm,kona-smc";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts
new file mode 100644
index 000000000000..353bb50ce542
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts
@@ -0,0 +1,272 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2711.dtsi"
+#include "bcm2711-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-usb-peripheral.dtsi"
+#include "bcm283x-rpi-wifi-bt.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "raspberrypi,4-model-b", "brcm,bcm2711";
+	model = "Raspberry Pi 4 Model B";
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+
+	cam1_reg: regulator-cam1 {
+		compatible = "regulator-fixed";
+		regulator-name = "cam1-reg";
+		enable-active-high;
+		gpio = <&expgpio 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	sd_io_1v8_reg: regulator-sd-io-1v8 {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-sd-io";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-settling-time-us = <5000>;
+		gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
+		status = "okay";
+	};
+
+	sd_vcc_reg: regulator-sd-vcc {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&expgpio 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&bt {
+	shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
+};
+
+&ddc0 {
+	status = "okay";
+};
+
+&ddc1 {
+	status = "okay";
+};
+
+&expgpio {
+	gpio-line-names = "BT_ON",		/*  0 */
+			  "WL_ON",
+			  "PWR_LED_OFF",
+			  "GLOBAL_RESET",
+			  "VDD_SD_IO_SEL",
+			  "CAM_GPIO",		/*  5 */
+			  "SD_PWR_ON",
+			  "";
+};
+
+&gpio {
+	/*
+	 * Parts taken from rpi_SCH_4b_4p0_reduced.pdf and
+	 * the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",		/*  0 */
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",		/*  5 */
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",		/* 10 */
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD1",
+			  "RXD1",		/* 15 */
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",		/* 20 */
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",		/* 25 */
+			  "GPIO26",
+			  "GPIO27",
+			  "RGMII_MDIO",
+			  "RGMIO_MDC",
+			  /* Used by BT module */
+			  "CTS0",		/* 30 */
+			  "RTS0",
+			  "TXD0",
+			  "RXD0",
+			  /* Used by Wifi */
+			  "SD1_CLK",
+			  "SD1_CMD",		/* 35 */
+			  "SD1_DATA0",
+			  "SD1_DATA1",
+			  "SD1_DATA2",
+			  "SD1_DATA3",
+			  /* Shared with SPI flash */
+			  "PWM0_MISO",		/* 40 */
+			  "PWM1_MOSI",
+			  "STATUS_LED_G_CLK",
+			  "SPIFLASH_CE_N",
+			  "SDA0",
+			  "SCL0",		/* 45 */
+			  "RGMII_RXCLK",
+			  "RGMII_RXCTL",
+			  "RGMII_RXD0",
+			  "RGMII_RXD1",
+			  "RGMII_RXD2",		/* 50 */
+			  "RGMII_RXD3",
+			  "RGMII_TXCLK",
+			  "RGMII_TXCTL",
+			  "RGMII_TXD0",
+			  "RGMII_TXD1",		/* 55 */
+			  "RGMII_TXD2",
+			  "RGMII_TXD3";
+};
+
+&hdmi0 {
+	status = "okay";
+};
+
+&hdmi1 {
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led_pwr: led-pwr {
+		label = "PWR";
+		gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
+&pixelvalve0 {
+	status = "okay";
+};
+
+&pixelvalve1 {
+	status = "okay";
+};
+
+&pixelvalve2 {
+	status = "okay";
+};
+
+&pixelvalve4 {
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm1_0_gpio40 &pwm1_1_gpio41>;
+	status = "okay";
+};
+
+/* EMMC2 is used to drive the SD card */
+&emmc2 {
+	vqmmc-supply = <&sd_io_1v8_reg>;
+	vmmc-supply = <&sd_vcc_reg>;
+	broken-cd;
+	status = "okay";
+};
+
+&genet {
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-rxid";
+	status = "okay";
+};
+
+&genet_mdio {
+	phy1: ethernet-phy@1 {
+		/* No PHY interrupt */
+		reg = <0x1>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* LED1 */
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+
+			/* LED2 */
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_AMBER>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+		};
+	};
+};
+
+&pcie0 {
+	pci@0,0 {
+		device_type = "pci";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		reg = <0 0 0 0 0>;
+
+		usb@0,0 {
+			reg = <0 0 0 0 0>;
+			resets = <&reset RASPBERRYPI_FIRMWARE_RESET_ID_USB>;
+		};
+	};
+};
+
+/* uart0 communicates with the BT module */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>;
+	uart-has-rtscts;
+};
+
+/* uart1 is mapped to the pin header */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_gpio14>;
+	status = "okay";
+};
+
+&vc4 {
+	status = "okay";
+};
+
+&vec {
+	status = "disabled";
+};
+
+&wifi_pwrseq {
+	reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/bcm2711-rpi-400.dts b/arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts
index f4d2fc20397c..ca9be91b4f36 100644
--- a/arch/arm/boot/dts/bcm2711-rpi-400.dts
+++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts
@@ -11,14 +11,6 @@
 		stdout-path = "serial1:115200n8";
 	};
 
-	leds {
-		/delete-node/ led-act;
-
-		led-pwr {
-			gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
 	gpio-poweroff {
 		compatible = "gpio-poweroff";
 		gpios = <&expgpio 5 GPIO_ACTIVE_HIGH>;
@@ -28,18 +20,25 @@
 &expgpio {
 	gpio-line-names = "BT_ON",
 			  "WL_ON",
-			  "",
+			  "PWR_LED_OFF",
 			  "GLOBAL_RESET",
 			  "VDD_SD_IO_SEL",
-			  "CAM_GPIO",
+			  "GLOBAL_SHUTDOWN",
 			  "SD_PWR_ON",
-			  "SD_OC_N";
+			  "SHUTDOWN_REQUEST";
 };
 
 &genet_mdio {
 	clock-frequency = <1950000>;
+	/delete-node/ leds;
 };
 
+&led_pwr {
+	gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
+};
+
+/delete-node/ &led_act;
+
 &pm {
 	/delete-property/ system-power-controller;
 };
diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts b/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts
new file mode 100644
index 000000000000..6bc77dd48c0d
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts
@@ -0,0 +1,172 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include <dt-bindings/leds/common.h>
+#include "bcm2711-rpi-cm4.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	model = "Raspberry Pi Compute Module 4 IO Board";
+};
+
+&ddc0 {
+	status = "okay";
+};
+
+&ddc1 {
+	status = "okay";
+};
+
+&gpio {
+	/*
+	 * Parts taken from rpi_SCH_4b_4p0_reduced.pdf and
+	 * the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD1",
+			  "RXD1",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "RGMII_MDIO",
+			  "RGMIO_MDC",
+			  /* Used by BT module */
+			  "CTS0",
+			  "RTS0",
+			  "TXD0",
+			  "RXD0",
+			  /* Used by Wifi */
+			  "SD1_CLK",
+			  "SD1_CMD",
+			  "SD1_DATA0",
+			  "SD1_DATA1",
+			  "SD1_DATA2",
+			  "SD1_DATA3",
+			  /* Shared with SPI flash */
+			  "PWM0_MISO",
+			  "PWM1_MOSI",
+			  "STATUS_LED_G_CLK",
+			  "SPIFLASH_CE_N",
+			  "SDA0",
+			  "SCL0",
+			  "RGMII_RXCLK",
+			  "RGMII_RXCTL",
+			  "RGMII_RXD0",
+			  "RGMII_RXD1",
+			  "RGMII_RXD2",
+			  "RGMII_RXD3",
+			  "RGMII_TXCLK",
+			  "RGMII_TXCTL",
+			  "RGMII_TXD0",
+			  "RGMII_TXD1",
+			  "RGMII_TXD2",
+			  "RGMII_TXD3";
+};
+
+&hdmi0 {
+	status = "okay";
+};
+
+&hdmi1 {
+	status = "okay";
+};
+
+&genet {
+	status = "okay";
+};
+
+&i2c0_1 {
+	rtc@51 {
+		/* Attention: An alarm resets the machine */
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		quartz-load-femtofarads = <7000>;
+	};
+};
+
+&phy1 {
+	leds {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* LED2 */
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+			default-state = "keep";
+		};
+
+		/* LED3 */
+		led@2 {
+			reg = <2>;
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_LAN;
+			default-state = "keep";
+		};
+	};
+};
+
+&led_act {
+	gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
+&pixelvalve0 {
+	status = "okay";
+};
+
+&pixelvalve1 {
+	status = "okay";
+};
+
+&pixelvalve2 {
+	status = "okay";
+};
+
+&pixelvalve4 {
+	status = "okay";
+};
+
+&vc4 {
+	status = "okay";
+};
+
+&vec {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4.dtsi b/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4.dtsi
new file mode 100644
index 000000000000..48e63ab7848c
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4.dtsi
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2711.dtsi"
+#include "bcm2711-rpi.dtsi"
+#include "bcm283x-rpi-wifi-bt.dtsi"
+
+/ {
+	compatible = "raspberrypi,4-compute-module", "brcm,bcm2711";
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+
+	sd_io_1v8_reg: regulator-sd-io-1v8 {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-sd-io";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-settling-time-us = <5000>;
+		gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
+		status = "okay";
+	};
+
+	sd_vcc_reg: regulator-sd-vcc {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&expgpio 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&bt {
+	shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
+};
+
+/* EMMC2 is used to drive the eMMC */
+&emmc2 {
+	bus-width = <8>;
+	vqmmc-supply = <&sd_io_1v8_reg>;
+	vmmc-supply = <&sd_vcc_reg>;
+	broken-cd;
+	/* Even the IP block is limited to 100 MHz
+	 * this provides a throughput gain
+	 */
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&expgpio {
+	gpio-line-names = "BT_ON",
+			  "WL_ON",
+			  "PWR_LED_OFF",
+			  "ANT1",
+			  "VDD_SD_IO_SEL",
+			  "CAM_GPIO",
+			  "SD_PWR_ON",
+			  "ANT2";
+
+	ant1: ant1-hog {
+		gpio-hog;
+		gpios = <3 GPIO_ACTIVE_HIGH>;
+		/* internal antenna enabled */
+		output-high;
+		line-name = "ant1";
+	};
+
+	ant2: ant2-hog {
+		gpio-hog;
+		gpios = <7 GPIO_ACTIVE_HIGH>;
+		/* external antenna disabled */
+		output-low;
+		line-name = "ant2";
+	};
+};
+
+&genet {
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-rxid";
+	status = "okay";
+};
+
+&genet_mdio {
+	phy1: ethernet-phy@0 {
+		/* No PHY interrupt */
+		reg = <0x0>;
+	};
+};
+
+/* uart0 communicates with the BT module */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>;
+	uart-has-rtscts;
+};
+
+/* uart1 is mapped to the pin header */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_gpio14>;
+	status = "okay";
+};
+
+&wifi_pwrseq {
+	reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi b/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi
new file mode 100644
index 000000000000..1eb6406449d1
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "bcm2835-rpi.dtsi"
+
+#include <dt-bindings/reset/raspberrypi,firmware-reset.h>
+
+/ {
+	/* Will be filled by the bootloader */
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0 0>;
+	};
+
+	aliases {
+		emmc2bus = &emmc2bus;
+		ethernet0 = &genet;
+		pcie0 = &pcie0;
+		blconfig = &blconfig;
+	};
+
+	i2c0mux: i2c-mux0 {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&i2c0>;
+
+		pinctrl-names = "i2c0", "i2c0-vc";
+		pinctrl-0 = <&i2c0_gpio0>;
+		pinctrl-1 = <&i2c0_gpio44>;
+
+		i2c0_0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c0_1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&firmware {
+	expgpio: gpio {
+		compatible = "raspberrypi,firmware-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		status = "okay";
+	};
+
+	reset: reset {
+		compatible = "raspberrypi,firmware-reset";
+		#reset-cells = <1>;
+	};
+};
+
+&hdmi0 {
+	clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>;
+	clock-names = "hdmi", "bvb", "audio", "cec";
+	wifi-2.4ghz-coexistence;
+};
+
+&hdmi1 {
+	clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>;
+	clock-names = "hdmi", "bvb", "audio", "cec";
+	wifi-2.4ghz-coexistence;
+};
+
+&hvs {
+	clocks = <&firmware_clocks 4>;
+};
+
+&i2c0 {
+	/delete-property/ pinctrl-names;
+	/delete-property/ pinctrl-0;
+};
+
+&pm {
+	clocks = <&firmware_clocks 5>,
+		 <&clocks BCM2835_CLOCK_PERI_IMAGE>,
+		 <&clocks BCM2835_CLOCK_H264>,
+		 <&clocks BCM2835_CLOCK_ISP>;
+	clock-names = "v3d", "peri_image", "h264", "isp";
+};
+
+&rmem {
+	/*
+	 * RPi4's co-processor will copy the board's bootloader configuration
+	 * into memory for the OS to consume. It'll also update this node with
+	 * its placement information.
+	 */
+	blconfig: nvram@0 {
+		compatible = "raspberrypi,bootloader-config", "nvmem-rmem";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0 0x0 0x0>;
+		no-map;
+		status = "disabled";
+	};
+};
+
+&v3d {
+	clocks = <&firmware_clocks 5>;
+};
+
+&vchiq {
+	interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/broadcom/bcm2711.dtsi
index 3b60297af7f6..c06d9f5e53c8 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm2711.dtsi
@@ -48,7 +48,7 @@
 		 * This node is the provider for the enable-method for
 		 * bringing up secondary cores.
 		 */
-		local_intc: local_intc@40000000 {
+		local_intc: interrupt-controller@40000000 {
 			compatible = "brcm,bcm2836-l1-intc";
 			reg = <0x40000000 0x100>;
 		};
@@ -76,7 +76,7 @@
 			};
 		};
 
-		dma: dma@7e007000 {
+		dma: dma-controller@7e007000 {
 			compatible = "brcm,bcm2835-dma";
 			reg = <0x7e007000 0xb00>;
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
@@ -107,12 +107,13 @@
 		};
 
 		pm: watchdog@7e100000 {
-			compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt";
+			compatible = "brcm,bcm2711-pm", "brcm,bcm2835-pm-wdt";
 			#power-domain-cells = <1>;
 			#reset-cells = <1>;
 			reg = <0x7e100000 0x114>,
 			      <0x7e00a000 0x24>,
 			      <0x7ec11000 0x20>;
+			reg-names = "pm", "asb", "rpivid_asb";
 			clocks = <&clocks BCM2835_CLOCK_V3D>,
 				 <&clocks BCM2835_CLOCK_PERI_IMAGE>,
 				 <&clocks BCM2835_CLOCK_H264>,
@@ -133,7 +134,7 @@
 			clocks = <&clocks BCM2835_CLOCK_UART>,
 				 <&clocks BCM2835_CLOCK_VPU>;
 			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
+			arm,primecell-periphid = <0x00341011>;
 			status = "disabled";
 		};
 
@@ -144,7 +145,7 @@
 			clocks = <&clocks BCM2835_CLOCK_UART>,
 				 <&clocks BCM2835_CLOCK_VPU>;
 			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
+			arm,primecell-periphid = <0x00341011>;
 			status = "disabled";
 		};
 
@@ -155,7 +156,7 @@
 			clocks = <&clocks BCM2835_CLOCK_UART>,
 				 <&clocks BCM2835_CLOCK_VPU>;
 			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
+			arm,primecell-periphid = <0x00341011>;
 			status = "disabled";
 		};
 
@@ -166,7 +167,7 @@
 			clocks = <&clocks BCM2835_CLOCK_UART>,
 				 <&clocks BCM2835_CLOCK_VPU>;
 			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
+			arm,primecell-periphid = <0x00341011>;
 			status = "disabled";
 		};
 
@@ -277,7 +278,7 @@
 			clocks = <&clocks BCM2835_CLOCK_PWM>;
 			assigned-clocks = <&clocks BCM2835_CLOCK_PWM>;
 			assigned-clock-rates = <10000000>;
-			#pwm-cells = <2>;
+			#pwm-cells = <3>;
 			status = "disabled";
 		};
 
@@ -290,6 +291,7 @@
 
 		hvs: hvs@7e400000 {
 			compatible = "brcm,bcm2711-hvs";
+			reg = <0x7e400000 0x8000>;
 			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
@@ -430,8 +432,8 @@
 		};
 	};
 
-	arm-pmu {
-		compatible = "arm,cortex-a72-pmu", "arm,armv8-pmuv3";
+	pmu {
+		compatible = "arm,cortex-a72-pmu";
 		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
 			<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
 			<GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
@@ -449,8 +451,6 @@
 					  IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
 					  IRQ_TYPE_LEVEL_LOW)>;
-		/* This only applies to the ARMv7 stub */
-		arm,cpu-registers-not-fw-configured;
 	};
 
 	cpus: cpus {
@@ -458,12 +458,26 @@
 		#size-cells = <0>;
 		enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
 
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 * https://developer.arm.com/documentation/100095/0003
+		 * /Level-1-Memory-System/About-the-L1-memory-system?lang=en
+		 * Source for d/i-cache-size
+		 * https://www.raspberrypi.com/documentation/computers
+		 * /processors.html#bcm2711
+		 */
 		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72";
 			reg = <0>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000d8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu1: cpu@1 {
@@ -472,6 +486,13 @@
 			reg = <1>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000e0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu2: cpu@2 {
@@ -480,6 +501,13 @@
 			reg = <2>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000e8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu3: cpu@3 {
@@ -488,6 +516,29 @@
 			reg = <3>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000f0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
+		};
+
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 *  https://developer.arm.com/documentation/100095/0003
+		 *  /Level-2-Memory-System/About-the-L2-memory-system?lang=en
+		 *  Source for d/i-cache-size
+		 *  https://www.raspberrypi.com/documentation/computers
+		 *  /processors.html#bcm2711
+		 */
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>; // 1MiB(size)/64(line-size)=16384ways/16-way set
+			cache-level = <2>;
 		};
 	};
 
@@ -506,11 +557,17 @@
 			#address-cells = <3>;
 			#interrupt-cells = <1>;
 			#size-cells = <2>;
-			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "pcie", "msi";
 			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143
+							IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gicv2 GIC_SPI 144
+							IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gicv2 GIC_SPI 145
+							IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gicv2 GIC_SPI 146
 							IRQ_TYPE_LEVEL_HIGH>;
 			msi-controller;
 			msi-parent = <&pcie0>;
@@ -544,6 +601,32 @@
 				#size-cells = <0x0>;
 			};
 		};
+
+		xhci: usb@7e9c0000 {
+			compatible = "brcm,bcm2711-xhci", "brcm,xhci-brcm-v2";
+			reg = <0x0 0x7e9c0000 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&pm BCM2835_POWER_DOMAIN_USB>;
+			/* DWC2 and this IP block share the same USB PHY,
+			 * enabling both at the same time results in lockups.
+			 * So keep this node disabled and let the bootloader
+			 * decide which interface should be enabled.
+			 */
+			status = "disabled";
+		};
+
+		v3d: gpu@7ec00000 {
+			compatible = "brcm,2711-v3d";
+			reg = <0x0 0x7ec00000 0x4000>,
+			      <0x0 0x7ec04000 0x4000>;
+			reg-names = "hub", "core0";
+
+			power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
+			resets = <&pm BCM2835_RESET_V3D>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+		};
 	};
 };
 
@@ -576,21 +659,23 @@
 		     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
 		     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 
-	gpclk0_gpio49: gpclk0_gpio49 {
+	gpio-ranges = <&gpio 0 0 58>;
+
+	gpclk0_gpio49: gpclk0-gpio49 {
 		pin-gpclk {
 			pins = "gpio49";
 			function = "alt1";
 			bias-disable;
 		};
 	};
-	gpclk1_gpio50: gpclk1_gpio50 {
+	gpclk1_gpio50: gpclk1-gpio50 {
 		pin-gpclk {
 			pins = "gpio50";
 			function = "alt1";
 			bias-disable;
 		};
 	};
-	gpclk2_gpio51: gpclk2_gpio51 {
+	gpclk2_gpio51: gpclk2-gpio51 {
 		pin-gpclk {
 			pins = "gpio51";
 			function = "alt1";
@@ -598,7 +683,7 @@
 		};
 	};
 
-	i2c0_gpio46: i2c0_gpio46 {
+	i2c0_gpio46: i2c0-gpio46 {
 		pin-sda {
 			function = "alt0";
 			pins = "gpio46";
@@ -610,7 +695,7 @@
 			bias-disable;
 		};
 	};
-	i2c1_gpio46: i2c1_gpio46 {
+	i2c1_gpio46: i2c1-gpio46 {
 		pin-sda {
 			function = "alt1";
 			pins = "gpio46";
@@ -622,7 +707,7 @@
 			bias-disable;
 		};
 	};
-	i2c3_gpio2: i2c3_gpio2 {
+	i2c3_gpio2: i2c3-gpio2 {
 		pin-sda {
 			function = "alt5";
 			pins = "gpio2";
@@ -634,7 +719,7 @@
 			bias-disable;
 		};
 	};
-	i2c3_gpio4: i2c3_gpio4 {
+	i2c3_gpio4: i2c3-gpio4 {
 		pin-sda {
 			function = "alt5";
 			pins = "gpio4";
@@ -646,7 +731,7 @@
 			bias-disable;
 		};
 	};
-	i2c4_gpio6: i2c4_gpio6 {
+	i2c4_gpio6: i2c4-gpio6 {
 		pin-sda {
 			function = "alt5";
 			pins = "gpio6";
@@ -658,7 +743,7 @@
 			bias-disable;
 		};
 	};
-	i2c4_gpio8: i2c4_gpio8 {
+	i2c4_gpio8: i2c4-gpio8 {
 		pin-sda {
 			function = "alt5";
 			pins = "gpio8";
@@ -670,7 +755,7 @@
 			bias-disable;
 		};
 	};
-	i2c5_gpio10: i2c5_gpio10 {
+	i2c5_gpio10: i2c5-gpio10 {
 		pin-sda {
 			function = "alt5";
 			pins = "gpio10";
@@ -682,7 +767,7 @@
 			bias-disable;
 		};
 	};
-	i2c5_gpio12: i2c5_gpio12 {
+	i2c5_gpio12: i2c5-gpio12 {
 		pin-sda {
 			function = "alt5";
 			pins = "gpio12";
@@ -694,7 +779,7 @@
 			bias-disable;
 		};
 	};
-	i2c6_gpio0: i2c6_gpio0 {
+	i2c6_gpio0: i2c6-gpio0 {
 		pin-sda {
 			function = "alt5";
 			pins = "gpio0";
@@ -706,7 +791,7 @@
 			bias-disable;
 		};
 	};
-	i2c6_gpio22: i2c6_gpio22 {
+	i2c6_gpio22: i2c6-gpio22 {
 		pin-sda {
 			function = "alt5";
 			pins = "gpio22";
@@ -718,7 +803,7 @@
 			bias-disable;
 		};
 	};
-	i2c_slave_gpio8: i2c_slave_gpio8 {
+	i2c_slave_gpio8: i2c-slave-gpio8 {
 		pins-i2c-slave {
 			pins = "gpio8",
 			       "gpio9",
@@ -728,7 +813,7 @@
 		};
 	};
 
-	jtag_gpio48: jtag_gpio48 {
+	jtag_gpio48: jtag-gpio48 {
 		pins-jtag {
 			pins = "gpio48",
 			       "gpio49",
@@ -740,7 +825,7 @@
 		};
 	};
 
-	mii_gpio28: mii_gpio28 {
+	mii_gpio28: mii-gpio28 {
 		pins-mii {
 			pins = "gpio28",
 			       "gpio29",
@@ -749,7 +834,7 @@
 			function = "alt4";
 		};
 	};
-	mii_gpio36: mii_gpio36 {
+	mii_gpio36: mii-gpio36 {
 		pins-mii {
 			pins = "gpio36",
 			       "gpio37",
@@ -759,7 +844,7 @@
 		};
 	};
 
-	pcm_gpio50: pcm_gpio50 {
+	pcm_gpio50: pcm-gpio50 {
 		pins-pcm {
 			pins = "gpio50",
 			       "gpio51",
@@ -769,63 +854,63 @@
 		};
 	};
 
-	pwm0_0_gpio12: pwm0_0_gpio12 {
+	pwm0_0_gpio12: pwm0-0-gpio12 {
 		pin-pwm {
 			pins = "gpio12";
 			function = "alt0";
 			bias-disable;
 		};
 	};
-	pwm0_0_gpio18: pwm0_0_gpio18 {
+	pwm0_0_gpio18: pwm0-0-gpio18 {
 		pin-pwm {
 			pins = "gpio18";
 			function = "alt5";
 			bias-disable;
 		};
 	};
-	pwm1_0_gpio40: pwm1_0_gpio40 {
+	pwm1_0_gpio40: pwm1-0-gpio40 {
 		pin-pwm {
 			pins = "gpio40";
 			function = "alt0";
 			bias-disable;
 		};
 	};
-	pwm0_1_gpio13: pwm0_1_gpio13 {
+	pwm0_1_gpio13: pwm0-1-gpio13 {
 		pin-pwm {
 			pins = "gpio13";
 			function = "alt0";
 			bias-disable;
 		};
 	};
-	pwm0_1_gpio19: pwm0_1_gpio19 {
+	pwm0_1_gpio19: pwm0-1-gpio19 {
 		pin-pwm {
 			pins = "gpio19";
 			function = "alt5";
 			bias-disable;
 		};
 	};
-	pwm1_1_gpio41: pwm1_1_gpio41 {
+	pwm1_1_gpio41: pwm1-1-gpio41 {
 		pin-pwm {
 			pins = "gpio41";
 			function = "alt0";
 			bias-disable;
 		};
 	};
-	pwm0_1_gpio45: pwm0_1_gpio45 {
+	pwm0_1_gpio45: pwm0-1-gpio45 {
 		pin-pwm {
 			pins = "gpio45";
 			function = "alt0";
 			bias-disable;
 		};
 	};
-	pwm0_0_gpio52: pwm0_0_gpio52 {
+	pwm0_0_gpio52: pwm0-0-gpio52 {
 		pin-pwm {
 			pins = "gpio52";
 			function = "alt1";
 			bias-disable;
 		};
 	};
-	pwm0_1_gpio53: pwm0_1_gpio53 {
+	pwm0_1_gpio53: pwm0-1-gpio53 {
 		pin-pwm {
 			pins = "gpio53";
 			function = "alt1";
@@ -833,7 +918,7 @@
 		};
 	};
 
-	rgmii_gpio35: rgmii_gpio35 {
+	rgmii_gpio35: rgmii-gpio35 {
 		pin-start-stop {
 			pins = "gpio35";
 			function = "alt4";
@@ -843,26 +928,26 @@
 			function = "alt4";
 		};
 	};
-	rgmii_irq_gpio34: rgmii_irq_gpio34 {
+	rgmii_irq_gpio34: rgmii-irq-gpio34 {
 		pin-irq {
 			pins = "gpio34";
 			function = "alt5";
 		};
 	};
-	rgmii_irq_gpio39: rgmii_irq_gpio39 {
+	rgmii_irq_gpio39: rgmii-irq-gpio39 {
 		pin-irq {
 			pins = "gpio39";
 			function = "alt4";
 		};
 	};
-	rgmii_mdio_gpio28: rgmii_mdio_gpio28 {
+	rgmii_mdio_gpio28: rgmii-mdio-gpio28 {
 		pins-mdio {
 			pins = "gpio28",
 			       "gpio29";
 			function = "alt5";
 		};
 	};
-	rgmii_mdio_gpio37: rgmii_mdio_gpio37 {
+	rgmii_mdio_gpio37: rgmii-mdio-gpio37 {
 		pins-mdio {
 			pins = "gpio37",
 			       "gpio38";
@@ -870,7 +955,7 @@
 		};
 	};
 
-	spi0_gpio46: spi0_gpio46 {
+	spi0_gpio46: spi0-gpio46 {
 		pins-spi {
 			pins = "gpio46",
 			       "gpio47",
@@ -879,7 +964,7 @@
 			function = "alt2";
 		};
 	};
-	spi2_gpio46: spi2_gpio46 {
+	spi2_gpio46: spi2-gpio46 {
 		pins-spi {
 			pins = "gpio46",
 			       "gpio47",
@@ -889,7 +974,7 @@
 			function = "alt5";
 		};
 	};
-	spi3_gpio0: spi3_gpio0 {
+	spi3_gpio0: spi3-gpio0 {
 		pins-spi {
 			pins = "gpio0",
 			       "gpio1",
@@ -898,7 +983,7 @@
 			function = "alt3";
 		};
 	};
-	spi4_gpio4: spi4_gpio4 {
+	spi4_gpio4: spi4-gpio4 {
 		pins-spi {
 			pins = "gpio4",
 			       "gpio5",
@@ -907,7 +992,7 @@
 			function = "alt3";
 		};
 	};
-	spi5_gpio12: spi5_gpio12 {
+	spi5_gpio12: spi5-gpio12 {
 		pins-spi {
 			pins = "gpio12",
 			       "gpio13",
@@ -916,7 +1001,7 @@
 			function = "alt3";
 		};
 	};
-	spi6_gpio18: spi6_gpio18 {
+	spi6_gpio18: spi6-gpio18 {
 		pins-spi {
 			pins = "gpio18",
 			       "gpio19",
@@ -926,7 +1011,7 @@
 		};
 	};
 
-	uart2_gpio0: uart2_gpio0 {
+	uart2_gpio0: uart2-gpio0 {
 		pin-tx {
 			pins = "gpio0";
 			function = "alt4";
@@ -938,7 +1023,7 @@
 			bias-pull-up;
 		};
 	};
-	uart2_ctsrts_gpio2: uart2_ctsrts_gpio2 {
+	uart2_ctsrts_gpio2: uart2-ctsrts-gpio2 {
 		pin-cts {
 			pins = "gpio2";
 			function = "alt4";
@@ -950,7 +1035,7 @@
 			bias-disable;
 		};
 	};
-	uart3_gpio4: uart3_gpio4 {
+	uart3_gpio4: uart3-gpio4 {
 		pin-tx {
 			pins = "gpio4";
 			function = "alt4";
@@ -962,7 +1047,7 @@
 			bias-pull-up;
 		};
 	};
-	uart3_ctsrts_gpio6: uart3_ctsrts_gpio6 {
+	uart3_ctsrts_gpio6: uart3-ctsrts-gpio6 {
 		pin-cts {
 			pins = "gpio6";
 			function = "alt4";
@@ -974,7 +1059,7 @@
 			bias-disable;
 		};
 	};
-	uart4_gpio8: uart4_gpio8 {
+	uart4_gpio8: uart4-gpio8 {
 		pin-tx {
 			pins = "gpio8";
 			function = "alt4";
@@ -986,7 +1071,7 @@
 			bias-pull-up;
 		};
 	};
-	uart4_ctsrts_gpio10: uart4_ctsrts_gpio10 {
+	uart4_ctsrts_gpio10: uart4-ctsrts-gpio10 {
 		pin-cts {
 			pins = "gpio10";
 			function = "alt4";
@@ -998,7 +1083,7 @@
 			bias-disable;
 		};
 	};
-	uart5_gpio12: uart5_gpio12 {
+	uart5_gpio12: uart5-gpio12 {
 		pin-tx {
 			pins = "gpio12";
 			function = "alt4";
@@ -1010,7 +1095,7 @@
 			bias-pull-up;
 		};
 	};
-	uart5_ctsrts_gpio14: uart5_ctsrts_gpio14 {
+	uart5_ctsrts_gpio14: uart5-ctsrts-gpio14 {
 		pin-cts {
 			pins = "gpio14";
 			function = "alt4";
@@ -1028,6 +1113,14 @@
 	#address-cells = <2>;
 };
 
+&csi0 {
+	interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&csi1 {
+	interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+};
+
 &cma {
 	/*
 	 * arm64 reserves the CMA by default somewhere in ZONE_DMA32,
@@ -1083,6 +1176,7 @@
 };
 
 &uart0 {
+	arm,primecell-periphid = <0x00341011>;
 	interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 };
 
diff --git a/arch/arm/boot/dts/broadcom/bcm28155-ap.dts b/arch/arm/boot/dts/broadcom/bcm28155-ap.dts
new file mode 100644
index 000000000000..cefaa9a3c45c
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm28155-ap.dts
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2013 Broadcom Corporation
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "bcm11351.dtsi"
+
+/ {
+	model = "BCM28155 AP board";
+	compatible = "brcm,bcm28155-ap", "brcm,bcm11351";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>; /* 1 GB */
+	};
+};
+
+&bsc1 {
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&bsc2 {
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&bsc3 {
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&pmu_bsc {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	pmu: pmu@8 {
+		compatible = "brcm,bcm59056";
+		interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x08>;
+
+		regulators {
+			camldo1_reg: camldo1 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			sdldo_reg: sdldo {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			sdxldo_reg: sdxldo {
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			usbldo_reg: usbldo {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			iosr1_reg: iosr1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&pwm {
+	status = "okay";
+};
+
+&sdio2 {
+	non-removable;
+	max-frequency = <48000000>;
+	vmmc-supply = <&camldo1_reg>;
+	vqmmc-supply = <&iosr1_reg>;
+	status = "okay";
+};
+
+&sdio4 {
+	max-frequency = <48000000>;
+	cd-gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&sdldo_reg>;
+	vqmmc-supply = <&sdxldo_reg>;
+	status = "okay";
+};
+
+&uartb {
+	status = "okay";
+};
+
+&usbotg {
+	vusb_d-supply = <&usbldo_reg>;
+	vusb_a-supply = <&iosr1_reg>;
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2835-common.dtsi b/arch/arm/boot/dts/broadcom/bcm2835-common.dtsi
index c25e797b9060..9261b67dbee1 100644
--- a/arch/arm/boot/dts/bcm2835-common.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm2835-common.dtsi
@@ -8,7 +8,7 @@
 	interrupt-parent = <&intc>;
 
 	soc {
-		dma: dma@7e007000 {
+		dma: dma-controller@7e007000 {
 			compatible = "brcm,bcm2835-dma";
 			reg = <0x7e007000 0xf00>;
 			interrupts = <1 16>,
@@ -62,6 +62,7 @@
 			#reset-cells = <1>;
 			reg = <0x7e100000 0x114>,
 			      <0x7e00a000 0x24>;
+			reg-names = "pm", "asb";
 			clocks = <&clocks BCM2835_CLOCK_V3D>,
 				 <&clocks BCM2835_CLOCK_PERI_IMAGE>,
 				 <&clocks BCM2835_CLOCK_H264>,
@@ -151,41 +152,41 @@
 };
 
 &gpio {
-	i2c_slave_gpio18: i2c_slave_gpio18 {
+	i2c_slave_gpio18: i2c-slave-gpio18 {
 		brcm,pins = <18 19 20 21>;
 		brcm,function = <BCM2835_FSEL_ALT3>;
 	};
 
-	jtag_gpio4: jtag_gpio4 {
+	jtag_gpio4: jtag-gpio4 {
 		brcm,pins = <4 5 6 12 13>;
 		brcm,function = <BCM2835_FSEL_ALT5>;
 	};
 
-	pwm0_gpio12: pwm0_gpio12 {
+	pwm0_gpio12: pwm0-gpio12 {
 		brcm,pins = <12>;
 		brcm,function = <BCM2835_FSEL_ALT0>;
 	};
-	pwm0_gpio18: pwm0_gpio18 {
+	pwm0_gpio18: pwm0-gpio18 {
 		brcm,pins = <18>;
 		brcm,function = <BCM2835_FSEL_ALT5>;
 	};
-	pwm0_gpio40: pwm0_gpio40 {
+	pwm0_gpio40: pwm0-gpio40 {
 		brcm,pins = <40>;
 		brcm,function = <BCM2835_FSEL_ALT0>;
 	};
-	pwm1_gpio13: pwm1_gpio13 {
+	pwm1_gpio13: pwm1-gpio13 {
 		brcm,pins = <13>;
 		brcm,function = <BCM2835_FSEL_ALT0>;
 	};
-	pwm1_gpio19: pwm1_gpio19 {
+	pwm1_gpio19: pwm1-gpio19 {
 		brcm,pins = <19>;
 		brcm,function = <BCM2835_FSEL_ALT5>;
 	};
-	pwm1_gpio41: pwm1_gpio41 {
+	pwm1_gpio41: pwm1-gpio41 {
 		brcm,pins = <41>;
 		brcm,function = <BCM2835_FSEL_ALT0>;
 	};
-	pwm1_gpio45: pwm1_gpio45 {
+	pwm1_gpio45: pwm1-gpio45 {
 		brcm,pins = <45>;
 		brcm,function = <BCM2835_FSEL_ALT0>;
 	};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/broadcom/bcm2835-rpi-a-plus.dts
index 40b9405f1a8e..069b48272aa5 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-a-plus.dts
@@ -2,6 +2,8 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
 
 / {
@@ -12,19 +14,6 @@
 		device_type = "memory";
 		reg = <0 0x10000000>;
 	};
-
-	leds {
-		led-act {
-			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-pwr {
-			label = "PWR";
-			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-			linux,default-trigger = "default-on";
-		};
-	};
 };
 
 &gpio {
@@ -32,7 +21,6 @@
 	 * This is based on the unreleased schematic for the Model A+.
 	 *
 	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
@@ -67,21 +55,21 @@
 			  "GPIO27",
 			  "SDA0",
 			  "SCL0",
-			  "NC", /* GPIO30 */
-			  "NC", /* GPIO31 */
+			  "", /* GPIO30 */
+			  "", /* GPIO31 */
 			  "CAM_GPIO1", /* GPIO32 */
-			  "NC", /* GPIO33 */
-			  "NC", /* GPIO34 */
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
 			  "PWR_LOW_N", /* GPIO35 */
-			  "NC", /* GPIO36 */
-			  "NC", /* GPIO37 */
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
 			  "USB_LIMIT", /* GPIO38 */
-			  "NC", /* GPIO39 */
+			  "", /* GPIO39 */
 			  "PWM0_OUT", /* GPIO40 */
 			  "CAM_GPIO0", /* GPIO41 */
-			  "NC", /* GPIO42 */
-			  "NC", /* GPIO43 */
-			  "NC", /* GPIO44 */
+			  "", /* GPIO42 */
+			  "", /* GPIO43 */
+			  "", /* GPIO44 */
 			  "PWM1_OUT", /* GPIO45 */
 			  "HDMI_HPD_N",
 			  "STATUS_LED",
@@ -93,6 +81,7 @@
 			  "SD_DATA2_R",
 			  "SD_DATA3_R";
 
+	pinctrl-names = "default";
 	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
 
 	/* I2S interface */
@@ -108,6 +97,19 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/broadcom/bcm2835-rpi-a.dts
index 11edb581dbaf..2726c00431e8 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-a.dts
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-a.dts
@@ -2,6 +2,8 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
 
 / {
@@ -12,12 +14,6 @@
 		device_type = "memory";
 		reg = <0 0x10000000>;
 	};
-
-	leds {
-		led-act {
-			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
-		};
-	};
 };
 
 &gpio {
@@ -26,7 +22,6 @@
 	 * RPI00021 sheet 02
 	 *
 	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
@@ -42,41 +37,41 @@
 			  "SPI_MISO",
 			  "SPI_MOSI",
 			  "SPI_SCLK",
-			  "NC", /* GPIO12 */
-			  "NC", /* GPIO13 */
+			  "", /* GPIO12 */
+			  "", /* GPIO13 */
 			  /* Serial port */
 			  "TXD0",
 			  "RXD0",
 			  "STATUS_LED_N",
 			  "GPIO17",
 			  "GPIO18",
-			  "NC", /* GPIO19 */
-			  "NC", /* GPIO20 */
+			  "", /* GPIO19 */
+			  "", /* GPIO20 */
 			  "GPIO21",
 			  "GPIO22",
 			  "GPIO23",
 			  "GPIO24",
 			  "GPIO25",
-			  "NC", /* GPIO26 */
+			  "", /* GPIO26 */
 			  "CAM_GPIO0",
 			  /* Binary number representing build/revision */
 			  "CONFIG0",
 			  "CONFIG1",
 			  "CONFIG2",
 			  "CONFIG3",
-			  "NC", /* GPIO32 */
-			  "NC", /* GPIO33 */
-			  "NC", /* GPIO34 */
-			  "NC", /* GPIO35 */
-			  "NC", /* GPIO36 */
-			  "NC", /* GPIO37 */
-			  "NC", /* GPIO38 */
-			  "NC", /* GPIO39 */
+			  "", /* GPIO32 */
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
+			  "", /* GPIO35 */
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
+			  "", /* GPIO38 */
+			  "", /* GPIO39 */
 			  "PWM0_OUT",
-			  "NC", /* GPIO41 */
-			  "NC", /* GPIO42 */
-			  "NC", /* GPIO43 */
-			  "NC", /* GPIO44 */
+			  "", /* GPIO41 */
+			  "", /* GPIO42 */
+			  "", /* GPIO43 */
+			  "", /* GPIO44 */
 			  "PWM1_OUT",
 			  "HDMI_HPD_P",
 			  "SD_CARD_DET",
@@ -88,6 +83,7 @@
 			  "SD_DATA2_R",
 			  "SD_DATA3_R";
 
+	pinctrl-names = "default";
 	pinctrl-0 = <&gpioout &alt0 &i2s_alt2>;
 
 	/* I2S interface */
@@ -103,6 +99,10 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/broadcom/bcm2835-rpi-b-plus.dts
index 1b435c64bd9c..c57b999a4520 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-b-plus.dts
@@ -2,6 +2,8 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-smsc9514.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
 
@@ -13,19 +15,6 @@
 		device_type = "memory";
 		reg = <0 0x20000000>;
 	};
-
-	leds {
-		led-act {
-			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-pwr {
-			label = "PWR";
-			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-			linux,default-trigger = "default-on";
-		};
-	};
 };
 
 &gpio {
@@ -34,7 +23,6 @@
 	 * RPI-BPLUS sheet 1
 	 *
 	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
@@ -69,21 +57,21 @@
 			  "GPIO27",
 			  "SDA0",
 			  "SCL0",
-			  "NC", /* GPIO30 */
+			  "", /* GPIO30 */
 			  "LAN_RUN", /* GPIO31 */
 			  "CAM_GPIO1", /* GPIO32 */
-			  "NC", /* GPIO33 */
-			  "NC", /* GPIO34 */
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
 			  "PWR_LOW_N", /* GPIO35 */
-			  "NC", /* GPIO36 */
-			  "NC", /* GPIO37 */
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
 			  "USB_LIMIT", /* GPIO38 */
-			  "NC", /* GPIO39 */
+			  "", /* GPIO39 */
 			  "PWM0_OUT", /* GPIO40 */
 			  "CAM_GPIO0", /* GPIO41 */
-			  "NC", /* GPIO42 */
-			  "NC", /* GPIO43 */
-			  "ETHCLK", /* GPIO44 */
+			  "", /* GPIO42 */
+			  "", /* GPIO43 */
+			  "ETH_CLK", /* GPIO44 */
 			  "PWM1_OUT", /* GPIO45 */
 			  "HDMI_HPD_N",
 			  "STATUS_LED",
@@ -95,6 +83,7 @@
 			  "SD_DATA2_R",
 			  "SD_DATA3_R";
 
+	pinctrl-names = "default";
 	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
 
 	/* I2S interface */
@@ -110,6 +99,19 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/broadcom/bcm2835-rpi-b-rev2.dts
index a23c25c00eea..ae6d3a9586ab 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-b-rev2.dts
@@ -2,6 +2,8 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-smsc9512.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
 
@@ -13,12 +15,6 @@
 		device_type = "memory";
 		reg = <0 0x10000000>;
 	};
-
-	leds {
-		led-act {
-			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
-		};
-	};
 };
 
 &gpio {
@@ -27,7 +23,6 @@
 	 * RPI00022 sheet 02
 	 *
 	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
@@ -43,40 +38,40 @@
 			  "SPI_MISO",
 			  "SPI_MOSI",
 			  "SPI_SCLK",
-			  "NC", /* GPIO12 */
-			  "NC", /* GPIO13 */
+			  "", /* GPIO12 */
+			  "", /* GPIO13 */
 			  /* Serial port */
 			  "TXD0",
 			  "RXD0",
 			  "STATUS_LED_N",
 			  "GPIO17",
 			  "GPIO18",
-			  "NC", /* GPIO19 */
-			  "NC", /* GPIO20 */
+			  "", /* GPIO19 */
+			  "", /* GPIO20 */
 			  "CAM_GPIO",
 			  "GPIO22",
 			  "GPIO23",
 			  "GPIO24",
 			  "GPIO25",
-			  "NC", /* GPIO26 */
+			  "", /* GPIO26 */
 			  "GPIO27",
 			  "GPIO28",
 			  "GPIO29",
 			  "GPIO30",
 			  "GPIO31",
-			  "NC", /* GPIO32 */
-			  "NC", /* GPIO33 */
-			  "NC", /* GPIO34 */
-			  "NC", /* GPIO35 */
-			  "NC", /* GPIO36 */
-			  "NC", /* GPIO37 */
-			  "NC", /* GPIO38 */
-			  "NC", /* GPIO39 */
+			  "", /* GPIO32 */
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
+			  "", /* GPIO35 */
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
+			  "", /* GPIO38 */
+			  "", /* GPIO39 */
 			  "PWM0_OUT",
-			  "NC", /* GPIO41 */
-			  "NC", /* GPIO42 */
-			  "NC", /* GPIO43 */
-			  "NC", /* GPIO44 */
+			  "", /* GPIO41 */
+			  "", /* GPIO42 */
+			  "", /* GPIO43 */
+			  "", /* GPIO44 */
 			  "PWM1_OUT",
 			  "HDMI_HPD_P",
 			  "SD_CARD_DET",
@@ -88,6 +83,7 @@
 			  "SD_DATA2_R",
 			  "SD_DATA3_R";
 
+	pinctrl-names = "default";
 	pinctrl-0 = <&gpioout &alt0 &i2s_alt2>;
 
 	/* I2S interface */
@@ -103,6 +99,10 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
diff --git a/arch/arm/boot/dts/broadcom/bcm2835-rpi-b.dts b/arch/arm/boot/dts/broadcom/bcm2835-rpi-b.dts
new file mode 100644
index 000000000000..72764be75a79
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-b.dts
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-smsc9512.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-b", "brcm,bcm2835";
+	model = "Raspberry Pi Model B";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x10000000>;
+	};
+};
+
+&gpio {
+	/*
+	 * Taken from Raspberry-Pi-Rev-1.0-Model-AB-Schematics.pdf
+	 * RPI00021 sheet 02
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "SDA0",
+			  "SCL0",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "CAM_GPIO1",
+			  "LAN_RUN",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "", /* GPIO12 */
+			  "", /* GPIO13 */
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "STATUS_LED_N",
+			  "GPIO17",
+			  "GPIO18",
+			  "", /* GPIO19 */
+			  "", /* GPIO20 */
+			  "CAM_GPIO0",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "", /* GPIO26 */
+			  "GPIO27",
+			  "GPIO28",
+			  "GPIO29",
+			  "GPIO30",
+			  "GPIO31",
+			  "", /* GPIO32 */
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
+			  "", /* GPIO35 */
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
+			  "", /* GPIO38 */
+			  "", /* GPIO39 */
+			  "PWM0_OUT",
+			  "", /* GPIO41 */
+			  "", /* GPIO42 */
+			  "", /* GPIO43 */
+			  "", /* GPIO44 */
+			  "PWM1_OUT",
+			  "HDMI_HPD_P",
+			  "SD_CARD_DET",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpioout &alt0>;
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+	status = "okay";
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts b/arch/arm/boot/dts/broadcom/bcm2835-rpi-cm1-io1.dts
index a75c882e6575..3f9d198ac3ab 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-cm1-io1.dts
@@ -13,7 +13,6 @@
 	 * This is based on the official GPU firmware DT blob.
 	 *
 	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
@@ -74,6 +73,7 @@
 			  "SD_DATA2_R",
 			  "SD_DATA3_R";
 
+	pinctrl-names = "default";
 	pinctrl-0 = <&gpioout &alt0>;
 };
 
diff --git a/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi b/arch/arm/boot/dts/broadcom/bcm2835-rpi-cm1.dtsi
index e4e6b6abbfc1..750cd76948e3 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-cm1.dtsi
@@ -2,6 +2,8 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 
 / {
 	leds {
@@ -32,6 +34,10 @@
 	};
 };
 
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
+};
+
 &sdhost {
 	non-removable;
 	vmmc-supply = <&reg_3v3>;
diff --git a/arch/arm/boot/dts/broadcom/bcm2835-rpi-common.dtsi b/arch/arm/boot/dts/broadcom/bcm2835-rpi-common.dtsi
new file mode 100644
index 000000000000..fa9d784c88b6
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-common.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This include file covers the common peripherals and configuration between
+ * bcm2835, bcm2836 and bcm2837 implementations that interact with RPi's
+ * firmware interface.
+ */
+
+#include <dt-bindings/power/raspberrypi-power.h>
+
+&hdmi {
+	clocks = <&firmware_clocks 9>,
+		 <&firmware_clocks 13>;
+	clock-names = "pixel", "hdmi";
+};
+
+&pm {
+	clocks = <&firmware_clocks 5>,
+		 <&clocks BCM2835_CLOCK_PERI_IMAGE>,
+		 <&clocks BCM2835_CLOCK_H264>,
+		 <&clocks BCM2835_CLOCK_ISP>;
+	clock-names = "v3d", "peri_image", "h264", "isp";
+};
+
+&v3d {
+	clocks = <&firmware_clocks 5>;
+	power-domains = <&power RPI_POWER_DOMAIN_V3D>;
+};
+
+&vec {
+	clocks = <&firmware_clocks 15>;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/broadcom/bcm2835-rpi-zero-w.dts
new file mode 100644
index 000000000000..1f0b163e400c
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-zero-w.dts
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 Stefan Wahren <stefan.wahren@i2se.com>
+ */
+
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-usb-otg.dtsi"
+#include "bcm283x-rpi-wifi-bt.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-zero-w", "brcm,bcm2835";
+	model = "Raspberry Pi Zero W";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x20000000>;
+	};
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+};
+
+&bt {
+	shutdown-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>;
+};
+
+&gpio {
+	/*
+	 * This is based on the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "SDA0",
+			  "SCL0",
+			  /* Used by BT module */
+			  "CTS0",
+			  "RTS0",
+			  "TXD0",
+			  "RXD0",
+			  /* Used by Wifi */
+			  "SD1_CLK",
+			  "SD1_CMD",
+			  "SD1_DATA0",
+			  "SD1_DATA1",
+			  "SD1_DATA2",
+			  "SD1_DATA3",
+			  "CAM_GPIO1", /* GPIO40 */
+			  "WL_ON", /* GPIO41 */
+			  "", /* GPIO42 */
+			  "WIFI_CLK", /* GPIO43 */
+			  "CAM_GPIO0", /* GPIO44 */
+			  "BT_ON", /* GPIO45 */
+			  "HDMI_HPD_N",
+			  "STATUS_LED_N",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpioout &alt0>;
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
+};
+
+&sdhci {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>;
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio32 &uart0_ctsrts_gpio30>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_gpio14>;
+	status = "okay";
+};
+
+&wifi_pwrseq {
+	reset-gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero.dts b/arch/arm/boot/dts/broadcom/bcm2835-rpi-zero.dts
index 6f9b3a908f28..539c19c10946 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-zero.dts
@@ -6,6 +6,8 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-usb-otg.dtsi"
 
 / {
@@ -16,12 +18,6 @@
 		device_type = "memory";
 		reg = <0 0x20000000>;
 	};
-
-	leds {
-		led-act {
-			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
-		};
-	};
 };
 
 &gpio {
@@ -29,7 +25,6 @@
 	 * This is based on the official GPU firmware DT blob.
 	 *
 	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
@@ -64,22 +59,22 @@
 			  "GPIO27",
 			  "SDA0",
 			  "SCL0",
-			  "NC", /* GPIO30 */
-			  "NC", /* GPIO31 */
+			  "", /* GPIO30 */
+			  "", /* GPIO31 */
 			  "CAM_GPIO1", /* GPIO32 */
-			  "NC", /* GPIO33 */
-			  "NC", /* GPIO34 */
-			  "NC", /* GPIO35 */
-			  "NC", /* GPIO36 */
-			  "NC", /* GPIO37 */
-			  "NC", /* GPIO38 */
-			  "NC", /* GPIO39 */
-			  "NC", /* GPIO40 */
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
+			  "", /* GPIO35 */
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
+			  "", /* GPIO38 */
+			  "", /* GPIO39 */
+			  "", /* GPIO40 */
 			  "CAM_GPIO0", /* GPIO41 */
-			  "NC", /* GPIO42 */
-			  "NC", /* GPIO43 */
-			  "NC", /* GPIO44 */
-			  "NC", /* GPIO45 */
+			  "", /* GPIO42 */
+			  "", /* GPIO43 */
+			  "", /* GPIO44 */
+			  "", /* GPIO45 */
 			  "HDMI_HPD_N",
 			  "STATUS_LED_N",
 			  /* Used by SD Card */
@@ -90,6 +85,7 @@
 			  "SD_DATA2_R",
 			  "SD_DATA3_R";
 
+	pinctrl-names = "default";
 	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
 
 	/* I2S interface */
@@ -105,6 +101,10 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+};
+
 &sdhost {
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdhost_gpio48>;
diff --git a/arch/arm/boot/dts/broadcom/bcm2835-rpi.dtsi b/arch/arm/boot/dts/broadcom/bcm2835-rpi.dtsi
new file mode 100644
index 000000000000..e9bf41b9f5c1
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi.dtsi
@@ -0,0 +1,84 @@
+#include <dt-bindings/power/raspberrypi-power.h>
+
+/ {
+	soc {
+		firmware: firmware {
+			compatible = "raspberrypi,bcm2835-firmware", "simple-mfd";
+			mboxes = <&mailbox>;
+
+			firmware_clocks: clocks {
+				compatible = "raspberrypi,firmware-clocks";
+				#clock-cells = <1>;
+			};
+		};
+
+		power: power {
+			compatible = "raspberrypi,bcm2835-power";
+			firmware = <&firmware>;
+			#power-domain-cells = <1>;
+		};
+
+		vchiq: mailbox@7e00b840 {
+			compatible = "brcm,bcm2835-vchiq";
+			reg = <0x7e00b840 0x3c>;
+			interrupts = <0 2>;
+		};
+	};
+};
+
+&csi0 {
+	clocks = <&clocks BCM2835_CLOCK_CAM0>,
+		 <&firmware_clocks 4>;
+	clock-names = "lp", "vpu";
+	power-domains = <&power RPI_POWER_DOMAIN_UNICAM0>;
+};
+
+&csi1 {
+	clocks = <&clocks BCM2835_CLOCK_CAM1>,
+		 <&firmware_clocks 4>;
+	clock-names = "lp", "vpu";
+	power-domains = <&power RPI_POWER_DOMAIN_UNICAM1>;
+};
+
+&gpio {
+	gpioout: gpioout {
+		brcm,pins = <6>;
+		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
+	};
+
+	alt0: alt0 {
+		brcm,pins = <4 5 7 8 9 10 11>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_gpio0>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_gpio2>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&usb {
+	power-domains = <&power RPI_POWER_DOMAIN_USB>;
+};
+
+&vec {
+	power-domains = <&power RPI_POWER_DOMAIN_VEC>;
+	status = "okay";
+};
+
+&dsi0 {
+	power-domains = <&power RPI_POWER_DOMAIN_DSI0>;
+};
+
+&dsi1 {
+	power-domains = <&power RPI_POWER_DOMAIN_DSI1>;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2835.dtsi b/arch/arm/boot/dts/broadcom/bcm2835.dtsi
new file mode 100644
index 000000000000..15cb331febbb
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2835.dtsi
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "bcm283x.dtsi"
+#include "bcm2835-common.dtsi"
+
+/ {
+	compatible = "brcm,bcm2835";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,arm1176jzf-s";
+			reg = <0x0>;
+			/* Source for d/i-cache-line-size and d/i-cache-sets
+			 * https://developer.arm.com/documentation/ddi0301
+			 * /h/level-one-memory-system/cache-organization?lang=en
+			 *
+			 * Source for d/i-cache-size
+			 * https://forums.raspberrypi.com/viewtopic.php?t=98428
+			 *
+			 * NOTE: The BCM2835 has a L2 cache but it is dedicated to the GPU
+			 * It can be shared with the CPU through fw settings,
+			 * but this is not recommended.
+			 */
+			d-cache-size = <0x4000>;
+			d-cache-line-size = <16>;
+			d-cache-sets = <256>; // 16KiB(size)/16(line-size)=1024ways/4-way set
+			i-cache-size = <0x4000>;
+			i-cache-line-size = <16>;
+			i-cache-sets = <256>; // 16KiB(size)/16(line-size)=1024ways/4-way set
+		};
+	};
+
+	soc {
+		ranges = <0x7e000000 0x20000000 0x02000000>;
+		dma-ranges = <0x40000000 0x00000000 0x20000000>;
+	};
+
+	arm-pmu {
+		compatible = "arm,arm1176-pmu";
+	};
+};
+
+&cpu_thermal {
+	coefficients = <(-538)	407000>;
+};
+
+/* enable thermal sensor with the correct compatible property set */
+&thermal {
+	compatible = "brcm,bcm2835-thermal";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/broadcom/bcm2836-rpi-2-b.dts
index d8af8eeac7b6..79918033750e 100644
--- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
+++ b/arch/arm/boot/dts/broadcom/bcm2836-rpi-2-b.dts
@@ -2,6 +2,7 @@
 /dts-v1/;
 #include "bcm2836.dtsi"
 #include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-smsc9514.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
 
@@ -13,19 +14,6 @@
 		device_type = "memory";
 		reg = <0 0x40000000>;
 	};
-
-	leds {
-		led-act {
-			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-pwr {
-			label = "PWR";
-			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-			linux,default-trigger = "default-on";
-		};
-	};
 };
 
 &gpio {
@@ -34,7 +22,6 @@
 	 * the official GPU firmware DT blob.
 	 *
 	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
@@ -83,7 +70,7 @@
 			  "CAM_GPIO0",
 			  "SMPS_SCL",
 			  "SMPS_SDA",
-			  "ETHCLK",
+			  "ETH_CLK",
 			  "PWM1_OUT",
 			  "HDMI_HPD_N",
 			  "STATUS_LED",
@@ -95,6 +82,7 @@
 			  "SD_DATA2_R",
 			  "SD_DATA3_R";
 
+	pinctrl-names = "default";
 	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
 
 	/* I2S interface */
@@ -110,6 +98,19 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
diff --git a/arch/arm/boot/dts/bcm2836-rpi.dtsi b/arch/arm/boot/dts/broadcom/bcm2836-rpi.dtsi
index c4c858b984c6..48b03b55ff56 100644
--- a/arch/arm/boot/dts/bcm2836-rpi.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm2836-rpi.dtsi
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
 
 &vchiq {
 	compatible = "brcm,bcm2836-vchiq", "brcm,bcm2835-vchiq";
diff --git a/arch/arm/boot/dts/broadcom/bcm2836.dtsi b/arch/arm/boot/dts/broadcom/bcm2836.dtsi
new file mode 100644
index 000000000000..783fe624ba68
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2836.dtsi
@@ -0,0 +1,142 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "bcm283x.dtsi"
+#include "bcm2835-common.dtsi"
+
+/ {
+	compatible = "brcm,bcm2836";
+
+	soc {
+		ranges = <0x7e000000 0x3f000000 0x1000000>,
+			 <0x40000000 0x40000000 0x00001000>;
+		dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
+
+		local_intc: interrupt-controller@40000000 {
+			compatible = "brcm,bcm2836-l1-intc";
+			reg = <0x40000000 0x100>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&local_intc>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupt-parent = <&local_intc>;
+		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&local_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>, // PHYS_SECURE_PPI
+			     <1 IRQ_TYPE_LEVEL_HIGH>, // PHYS_NONSECURE_PPI
+			     <3 IRQ_TYPE_LEVEL_HIGH>, // VIRT_PPI
+			     <2 IRQ_TYPE_LEVEL_HIGH>; // HYP_PPI
+		always-on;
+	};
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "brcm,bcm2836-smp";
+
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 * https://developer.arm.com/documentation/ddi0464/f/L1-Memory-System
+		 * /About-the-L1-memory-system?lang=en
+		 *
+		 * Source for d/i-cache-size
+		 * https://forums.raspberrypi.com/viewtopic.php?t=98428
+		 */
+
+		v7_cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf00>;
+			clock-frequency = <800000000>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <32>;
+			i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		v7_cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf01>;
+			clock-frequency = <800000000>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <32>;
+			i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		v7_cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf02>;
+			clock-frequency = <800000000>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <32>;
+			i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		v7_cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf03>;
+			clock-frequency = <800000000>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <32>;
+			i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		/* Source for cache-line-size + cache-sets
+		 * https://developer.arm.com/documentation/ddi0464/f/L2-Memory-System
+		 * /About-the-L2-Memory-system?lang=en
+		 * Source for cache-size
+		 * https://forums.raspberrypi.com/viewtopic.php?t=98428
+		 */
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>; // 512KiB(size)/64(line-size)=8192ways/8-way set
+			cache-level = <2>;
+		};
+	};
+};
+
+/* Make the BCM2835-style global interrupt controller be a child of the
+ * CPU-local interrupt controller.
+ */
+&intc {
+	compatible = "brcm,bcm2836-armctrl-ic";
+	reg = <0x7e00b200 0x200>;
+	interrupt-parent = <&local_intc>;
+	interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&cpu_thermal {
+	coefficients = <(-538)	407000>;
+};
+
+/* enable thermal sensor with the correct compatible property set */
+&thermal {
+	compatible = "brcm,bcm2836-thermal";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2837-rpi-2-b.dts b/arch/arm/boot/dts/broadcom/bcm2837-rpi-2-b.dts
new file mode 100644
index 000000000000..1868cee05853
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2837-rpi-2-b.dts
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-smsc9514.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,2-model-b-rev2", "brcm,bcm2837";
+	model = "Raspberry Pi 2 Model B rev 1.2";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x40000000>;
+	};
+};
+
+&gpio {
+	/*
+	 * Taken from rpi_SCH_2b_1p2_reduced.pdf and
+	 * the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "GPIO2",
+			  "GPIO3",
+			  "GPIO4",
+			  "GPIO5",
+			  "GPIO6",
+			  "GPIO7",
+			  "GPIO8",
+			  "GPIO9",
+			  "GPIO10",
+			  "GPIO11",
+			  "GPIO12",
+			  "GPIO13",
+			  "GPIO14",
+			  "GPIO15",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "SDA0",
+			  "SCL0",
+			  "", /* GPIO30 */
+			  "LAN_RUN",
+			  "CAM_GPIO1",
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
+			  "PWR_LOW_N",
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
+			  "USB_LIMIT",
+			  "", /* GPIO39 */
+			  "PWM0_OUT",
+			  "CAM_GPIO0",
+			  "SMPS_SCL",
+			  "SMPS_SDA",
+			  "ETH_CLK",
+			  "PWM1_OUT",
+			  "HDMI_HPD_N",
+			  "STATUS_LED",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
+
+	/* I2S interface */
+	i2s_alt0: i2s_alt0 {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+	status = "okay";
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts b/arch/arm/boot/dts/broadcom/bcm2837-rpi-3-a-plus.dts
index 77099a7871b0..3548306dfbcb 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
+++ b/arch/arm/boot/dts/broadcom/bcm2837-rpi-3-a-plus.dts
@@ -2,7 +2,9 @@
 /dts-v1/;
 #include "bcm2837.dtsi"
 #include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
+#include "bcm283x-rpi-wifi-bt.dtsi"
 
 / {
 	compatible = "raspberrypi,3-model-a-plus", "brcm,bcm2837";
@@ -17,19 +19,6 @@
 		device_type = "memory";
 		reg = <0 0x20000000>;
 	};
-
-	leds {
-		led-act {
-			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-pwr {
-			label = "PWR";
-			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-			linux,default-trigger = "default-on";
-		};
-	};
 };
 
 &firmware {
@@ -54,7 +43,6 @@
 	 * This is mostly based on the official GPU firmware DT blob.
 	 *
 	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
@@ -124,32 +112,23 @@
 	status = "okay";
 };
 
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
-	status = "okay";
+&led_act {
+	gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
 };
 
-/*
- * SDHCI is used to control the SDIO for wireless
- *
- * WL_REG_ON and BT_REG_ON of the CYW43455 Wifi/BT module are driven
- * by a single GPIO. We can't give GPIO control to one of the drivers,
- * otherwise the other part would get unexpectedly disturbed.
- */
-&sdhci {
-	#address-cells = <1>;
-	#size-cells = <0>;
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
+&pwm {
 	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_gpio34>;
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
 	status = "okay";
-	bus-width = <4>;
-	non-removable;
-
-	brcmf: wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-	};
 };
 
 /* SDHOST is used to drive the SD card */
@@ -160,16 +139,15 @@
 	bus-width = <4>;
 };
 
-/* uart0 communicates with the BT module */
+/* uart0 communicates with the BT module
+ *
+ * WL_REG_ON and BT_REG_ON of the CYW43455 Wifi/BT module are driven
+ * by a single GPIO. We can't give GPIO control to one of the drivers,
+ * otherwise the other part would get unexpectedly disturbed.
+ */
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>;
-	status = "okay";
-
-	bluetooth {
-		compatible = "brcm,bcm43438-bt";
-		max-speed = <2000000>;
-	};
 };
 
 /* uart1 is mapped to the pin header */
diff --git a/arch/arm/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts
new file mode 100644
index 000000000000..2f1800cbc522
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts
@@ -0,0 +1,163 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-lan7515.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+#include "bcm283x-rpi-wifi-bt.dtsi"
+
+/ {
+	compatible = "raspberrypi,3-model-b-plus", "brcm,bcm2837";
+	model = "Raspberry Pi 3 Model B+";
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x40000000>;
+	};
+};
+
+&bt {
+	shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
+};
+
+&firmware {
+	expgpio: gpio {
+		compatible = "raspberrypi,firmware-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "BT_ON",
+				  "WL_ON",
+				  "PWR_LED_R",
+				  "LAN_RUN",
+				  "",
+				  "CAM_GPIO0",
+				  "CAM_GPIO1",
+				  "";
+		status = "okay";
+	};
+};
+
+&gpio {
+	/*
+	 * Taken from rpi_SCH_3bplus_1p0_reduced.pdf and
+	 * the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD1",
+			  "RXD1",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "HDMI_HPD_N",
+			  "STATUS_LED_G",
+			  /* Used by BT module */
+			  "CTS0",
+			  "RTS0",
+			  "TXD0",
+			  "RXD0",
+			  /* Used by Wifi */
+			  "SD1_CLK",
+			  "SD1_CMD",
+			  "SD1_DATA0",
+			  "SD1_DATA1",
+			  "SD1_DATA2",
+			  "SD1_DATA3",
+			  "PWM0_OUT",
+			  "PWM1_OUT",
+			  "ETH_CLK",
+			  "WIFI_CLK",
+			  "SDA0",
+			  "SCL0",
+			  "SMPS_SCL",
+			  "SMPS_SDA",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
+	status = "okay";
+};
+
+/* SDHOST is used to drive the SD card */
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	status = "okay";
+	bus-width = <4>;
+};
+
+/* uart0 communicates with the BT module */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>;
+};
+
+/* uart1 is mapped to the pin header */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_gpio14>;
+	status = "okay";
+};
+
+&wifi_pwrseq {
+	reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/broadcom/bcm2837-rpi-3-b.dts
index dd4a48604097..61270340075c 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
+++ b/arch/arm/boot/dts/broadcom/bcm2837-rpi-3-b.dts
@@ -2,8 +2,10 @@
 /dts-v1/;
 #include "bcm2837.dtsi"
 #include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-smsc9514.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
+#include "bcm283x-rpi-wifi-bt.dtsi"
 
 / {
 	compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
@@ -18,17 +20,10 @@
 		device_type = "memory";
 		reg = <0 0x40000000>;
 	};
+};
 
-	leds {
-		led-act {
-			gpios = <&expgpio 2 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	wifi_pwrseq: wifi-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
-	};
+&bt {
+	shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
 };
 
 &firmware {
@@ -54,7 +49,6 @@
 	 * the official GPU firmware DT blob.
 	 *
 	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
@@ -103,7 +97,7 @@
 			  "SD1_DATA3",
 			  "PWM0_OUT",
 			  "PWM1_OUT",
-			  "ETHCLK",
+			  "ETH_CLK",
 			  "WIFI_CLK",
 			  "SDA0",
 			  "SCL0",
@@ -130,17 +124,14 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&expgpio 2 GPIO_ACTIVE_HIGH>;
+};
+
 /* uart0 communicates with the BT module */
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_gpio32 &gpclk2_gpio43>;
-	status = "okay";
-
-	bluetooth {
-		compatible = "brcm,bcm43438-bt";
-		max-speed = <2000000>;
-		shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
-	};
 };
 
 /* uart1 is mapped to the pin header */
@@ -150,23 +141,6 @@
 	status = "okay";
 };
 
-/* SDHCI is used to control the SDIO for wireless */
-&sdhci {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_gpio34>;
-	status = "okay";
-	bus-width = <4>;
-	non-removable;
-	mmc-pwrseq = <&wifi_pwrseq>;
-
-	brcmf: wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-	};
-};
-
 /* SDHOST is used to drive the SD card */
 &sdhost {
 	pinctrl-names = "default";
@@ -174,3 +148,7 @@
 	status = "okay";
 	bus-width = <4>;
 };
+
+&wifi_pwrseq {
+	reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts b/arch/arm/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts
index 588d9411ceb6..85f54fa595aa 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts
+++ b/arch/arm/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts
@@ -13,7 +13,6 @@
 	 * This is based on the official GPU firmware DT blob.
 	 *
 	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
@@ -63,8 +62,8 @@
 			  "GPIO43",
 			  "GPIO44",
 			  "GPIO45",
-			  "GPIO46",
-			  "GPIO47",
+			  "SMPS_SCL",
+			  "SMPS_SDA",
 			  /* Used by eMMC */
 			  "SD_CLK_R",
 			  "SD_CMD_R",
@@ -73,11 +72,12 @@
 			  "SD_DATA2_R",
 			  "SD_DATA3_R";
 
+	pinctrl-names = "default";
 	pinctrl-0 = <&gpioout &alt0>;
 };
 
 &hdmi {
-	hpd-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+	hpd-gpios = <&expgpio 0 GPIO_ACTIVE_LOW>;
 	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi b/arch/arm/boot/dts/broadcom/bcm2837-rpi-cm3.dtsi
index 828a20561b96..1e4e4946b6b6 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm2837-rpi-cm3.dtsi
@@ -9,14 +9,6 @@
 		reg = <0 0x40000000>;
 	};
 
-	leds {
-		/*
-		 * Since there is no upstream GPIO driver yet,
-		 * remove the incomplete node.
-		 */
-		/delete-node/ led-act;
-	};
-
 	reg_3v3: fixed-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "3V3";
@@ -41,12 +33,12 @@
 		#gpio-cells = <2>;
 		gpio-line-names = "HDMI_HPD_N",
 				  "EMMC_EN_N",
-				  "NC",
-				  "NC",
-				  "NC",
-				  "NC",
-				  "NC",
-				  "NC";
+				  "",
+				  "",
+				  "",
+				  "",
+				  "",
+				  "";
 		status = "okay";
 	};
 };
diff --git a/arch/arm/boot/dts/broadcom/bcm2837-rpi-zero-2-w.dts b/arch/arm/boot/dts/broadcom/bcm2837-rpi-zero-2-w.dts
new file mode 100644
index 000000000000..85cf594724ef
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2837-rpi-zero-2-w.dts
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2022 Stefan Wahren <stefan.wahren@i2se.com>
+ */
+
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-usb-otg.dtsi"
+#include "bcm283x-rpi-wifi-bt.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-zero-2-w", "brcm,bcm2837";
+	model = "Raspberry Pi Zero 2 W";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x20000000>;
+	};
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+};
+
+&bt {
+	shutdown-gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
+};
+
+&gpio {
+	/*
+	 * This is based on the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "HDMI_HPD_N",
+			  "STATUS_LED_N",
+			  "NC", /* GPIO30 */
+			  "NC", /* GPIO31 */
+			  "NC", /* GPIO32 */
+			  "NC", /* GPIO33 */
+			  "NC", /* GPIO34 */
+			  "NC", /* GPIO35 */
+			  "NC", /* GPIO36 */
+			  "NC", /* GPIO37 */
+			  "NC", /* GPIO38 */
+			  "NC", /* GPIO39 */
+			  "CAM_GPIO0", /* GPIO40 */
+			  "WL_ON", /* GPIO41 */
+			  "BT_ON", /* GPIO42 */
+			  "WIFI_CLK", /* GPIO43 */
+			  "SDA0", /* GPIO44 */
+			  "SCL0", /* GPIO45 */
+			  "SMPS_SCL",
+			  "SMPS_SDA",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpioout &alt0>;
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+};
+
+&sdhci {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>;
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio32 &uart0_ctsrts_gpio30>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_gpio14>;
+	status = "okay";
+};
+
+&wifi_pwrseq {
+	reset-gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2837.dtsi b/arch/arm/boot/dts/broadcom/bcm2837.dtsi
new file mode 100644
index 000000000000..c281697142b1
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2837.dtsi
@@ -0,0 +1,144 @@
+#include "bcm283x.dtsi"
+#include "bcm2835-common.dtsi"
+
+/ {
+	compatible = "brcm,bcm2837";
+
+	soc {
+		ranges = <0x7e000000 0x3f000000 0x1000000>,
+			 <0x40000000 0x40000000 0x00001000>;
+		dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
+
+		local_intc: interrupt-controller@40000000 {
+			compatible = "brcm,bcm2836-l1-intc";
+			reg = <0x40000000 0x100>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&local_intc>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupt-parent = <&local_intc>;
+		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&local_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>, // PHYS_SECURE_PPI
+			     <1 IRQ_TYPE_LEVEL_HIGH>, // PHYS_NONSECURE_PPI
+			     <3 IRQ_TYPE_LEVEL_HIGH>, // VIRT_PPI
+			     <2 IRQ_TYPE_LEVEL_HIGH>; // HYP_PPI
+		always-on;
+	};
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
+
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 * https://developer.arm.com/documentation/ddi0500/e/level-1-memory-system
+		 * /about-the-l1-memory-system?lang=en
+		 *
+		 * Source for d/i-cache-size
+		 * https://magpi.raspberrypi.com/articles/raspberry-pi-3-specs-benchmarks
+		 */
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000d8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000e0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <2>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000e8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <3>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000f0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		/* Source for cache-line-size + cache-sets
+		 * https://developer.arm.com/documentation/ddi0500
+		 * /e/level-2-memory-system/about-the-l2-memory-system?lang=en
+		 * Source for cache-size
+		 * https://datasheets.raspberrypi.com/cm/cm1-and-cm3-datasheet.pdf
+		 */
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>; // 512KiB(size)/64(line-size)=8192ways/16-way set
+			cache-level = <2>;
+		};
+	};
+};
+
+/* Make the BCM2835-style global interrupt controller be a child of the
+ * CPU-local interrupt controller.
+ */
+&intc {
+	compatible = "brcm,bcm2836-armctrl-ic";
+	reg = <0x7e00b200 0x200>;
+	interrupt-parent = <&local_intc>;
+	interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&cpu_thermal {
+	coefficients = <(-538)	412000>;
+};
+
+/* enable thermal sensor with the correct compatible property set */
+&thermal {
+	compatible = "brcm,bcm2837-thermal";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi b/arch/arm/boot/dts/broadcom/bcm283x-rpi-lan7515.dtsi
index 70bece63f9a7..70bece63f9a7 100644
--- a/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm283x-rpi-lan7515.dtsi
diff --git a/arch/arm/boot/dts/broadcom/bcm283x-rpi-led-deprecated.dtsi b/arch/arm/boot/dts/broadcom/bcm283x-rpi-led-deprecated.dtsi
new file mode 100644
index 000000000000..f83e56de1a72
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm283x-rpi-led-deprecated.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	/*
+	 * This file provides the now deprecated ACT LED to the
+	 * Raspberry Pi boards. Please don't include this file
+	 * for new boards!
+	 */
+	leds: leds {
+		compatible = "gpio-leds";
+
+		led_act: led-act {
+			label = "ACT";
+			default-state = "keep";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi b/arch/arm/boot/dts/broadcom/bcm283x-rpi-smsc9512.dtsi
index 967e081cb9c2..882b13807075 100644
--- a/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm283x-rpi-smsc9512.dtsi
@@ -12,7 +12,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		ethernet: usbether@1 {
+		ethernet: ethernet@1 {
 			compatible = "usb424,ec00";
 			reg = <1>;
 		};
diff --git a/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi b/arch/arm/boot/dts/broadcom/bcm283x-rpi-smsc9514.dtsi
index dc7ae776db5f..4273b90b53cc 100644
--- a/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm283x-rpi-smsc9514.dtsi
@@ -11,7 +11,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		ethernet: usbether@1 {
+		ethernet: ethernet@1 {
 			compatible = "usb424,ec00";
 			reg = <1>;
 		};
diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-host.dtsi b/arch/arm/boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi
index 73f4ece8dcd0..73f4ece8dcd0 100644
--- a/arch/arm/boot/dts/bcm283x-rpi-usb-host.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi
diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi b/arch/arm/boot/dts/broadcom/bcm283x-rpi-usb-otg.dtsi
index e2fd9610e125..e2fd9610e125 100644
--- a/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm283x-rpi-usb-otg.dtsi
diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi b/arch/arm/boot/dts/broadcom/bcm283x-rpi-usb-peripheral.dtsi
index 0ff0e9e25327..0ff0e9e25327 100644
--- a/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm283x-rpi-usb-peripheral.dtsi
diff --git a/arch/arm/boot/dts/broadcom/bcm283x-rpi-wifi-bt.dtsi b/arch/arm/boot/dts/broadcom/bcm283x-rpi-wifi-bt.dtsi
new file mode 100644
index 000000000000..0b64cc19941f
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm283x-rpi-wifi-bt.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+	};
+};
+
+/* SDHCI is used to control the SDIO for wireless */
+&sdhci {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_gpio34>;
+	bus-width = <4>;
+	non-removable;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* uart0 communicates with the BT module */
+&uart0 {
+	status = "okay";
+
+	bt: bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <2000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/broadcom/bcm283x.dtsi
index a3e06b680947..69b0919f1324 100644
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm283x.dtsi
@@ -50,9 +50,9 @@
 
 			trips {
 				cpu-crit {
-					temperature	= <90000>;
-					hysteresis	= <0>;
-					type		= "critical";
+					temperature = <90000>;
+					hysteresis = <0>;
+					type = "critical";
 				};
 			};
 
@@ -126,6 +126,8 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
+			gpio-ranges = <&gpio 0 0 54>;
+
 			/* Defines common pin muxing groups
 			 *
 			 * While each pin can have its mux selected
@@ -133,17 +135,17 @@
 			 * groups only make sense to switch to a
 			 * particular function together.
 			 */
-			dpi_gpio0: dpi_gpio0 {
+			dpi_gpio0: dpi-gpio0 {
 				brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11
 					     12 13 14 15 16 17 18 19
 					     20 21 22 23 24 25 26 27>;
 				brcm,function = <BCM2835_FSEL_ALT2>;
 			};
-			emmc_gpio22: emmc_gpio22 {
+			emmc_gpio22: emmc-gpio22 {
 				brcm,pins = <22 23 24 25 26 27>;
 				brcm,function = <BCM2835_FSEL_ALT3>;
 			};
-			emmc_gpio34: emmc_gpio34 {
+			emmc_gpio34: emmc-gpio34 {
 				brcm,pins = <34 35 36 37 38 39>;
 				brcm,function = <BCM2835_FSEL_ALT3>;
 				brcm,pull = <BCM2835_PUD_OFF
@@ -153,95 +155,95 @@
 					     BCM2835_PUD_UP
 					     BCM2835_PUD_UP>;
 			};
-			emmc_gpio48: emmc_gpio48 {
+			emmc_gpio48: emmc-gpio48 {
 				brcm,pins = <48 49 50 51 52 53>;
 				brcm,function = <BCM2835_FSEL_ALT3>;
 			};
 
-			gpclk0_gpio4: gpclk0_gpio4 {
+			gpclk0_gpio4: gpclk0-gpio4 {
 				brcm,pins = <4>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			gpclk1_gpio5: gpclk1_gpio5 {
+			gpclk1_gpio5: gpclk1-gpio5 {
 				brcm,pins = <5>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			gpclk1_gpio42: gpclk1_gpio42 {
+			gpclk1_gpio42: gpclk1-gpio42 {
 				brcm,pins = <42>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			gpclk1_gpio44: gpclk1_gpio44 {
+			gpclk1_gpio44: gpclk1-gpio44 {
 				brcm,pins = <44>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			gpclk2_gpio6: gpclk2_gpio6 {
+			gpclk2_gpio6: gpclk2-gpio6 {
 				brcm,pins = <6>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			gpclk2_gpio43: gpclk2_gpio43 {
+			gpclk2_gpio43: gpclk2-gpio43 {
 				brcm,pins = <43>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 				brcm,pull = <BCM2835_PUD_OFF>;
 			};
 
-			i2c0_gpio0: i2c0_gpio0 {
+			i2c0_gpio0: i2c0-gpio0 {
 				brcm,pins = <0 1>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			i2c0_gpio28: i2c0_gpio28 {
+			i2c0_gpio28: i2c0-gpio28 {
 				brcm,pins = <28 29>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			i2c0_gpio44: i2c0_gpio44 {
+			i2c0_gpio44: i2c0-gpio44 {
 				brcm,pins = <44 45>;
 				brcm,function = <BCM2835_FSEL_ALT1>;
 			};
-			i2c1_gpio2: i2c1_gpio2 {
+			i2c1_gpio2: i2c1-gpio2 {
 				brcm,pins = <2 3>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			i2c1_gpio44: i2c1_gpio44 {
+			i2c1_gpio44: i2c1-gpio44 {
 				brcm,pins = <44 45>;
 				brcm,function = <BCM2835_FSEL_ALT2>;
 			};
 
-			jtag_gpio22: jtag_gpio22 {
+			jtag_gpio22: jtag-gpio22 {
 				brcm,pins = <22 23 24 25 26 27>;
 				brcm,function = <BCM2835_FSEL_ALT4>;
 			};
 
-			pcm_gpio18: pcm_gpio18 {
+			pcm_gpio18: pcm-gpio18 {
 				brcm,pins = <18 19 20 21>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			pcm_gpio28: pcm_gpio28 {
+			pcm_gpio28: pcm-gpio28 {
 				brcm,pins = <28 29 30 31>;
 				brcm,function = <BCM2835_FSEL_ALT2>;
 			};
 
-			sdhost_gpio48: sdhost_gpio48 {
+			sdhost_gpio48: sdhost-gpio48 {
 				brcm,pins = <48 49 50 51 52 53>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
 
-			spi0_gpio7: spi0_gpio7 {
+			spi0_gpio7: spi0-gpio7 {
 				brcm,pins = <7 8 9 10 11>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			spi0_gpio35: spi0_gpio35 {
+			spi0_gpio35: spi0-gpio35 {
 				brcm,pins = <35 36 37 38 39>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			spi1_gpio16: spi1_gpio16 {
+			spi1_gpio16: spi1-gpio16 {
 				brcm,pins = <16 17 18 19 20 21>;
 				brcm,function = <BCM2835_FSEL_ALT4>;
 			};
-			spi2_gpio40: spi2_gpio40 {
+			spi2_gpio40: spi2-gpio40 {
 				brcm,pins = <40 41 42 43 44 45>;
 				brcm,function = <BCM2835_FSEL_ALT4>;
 			};
 
-			uart0_gpio14: uart0_gpio14 {
+			uart0_gpio14: uart0-gpio14 {
 				brcm,pins = <14 15>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
@@ -250,50 +252,50 @@
 			 * people often run uart0 on the two pins
 			 * without flow control.
 			 */
-			uart0_ctsrts_gpio16: uart0_ctsrts_gpio16 {
+			uart0_ctsrts_gpio16: uart0-ctsrts-gpio16 {
 				brcm,pins = <16 17>;
 				brcm,function = <BCM2835_FSEL_ALT3>;
 			};
-			uart0_ctsrts_gpio30: uart0_ctsrts_gpio30 {
+			uart0_ctsrts_gpio30: uart0-ctsrts-gpio30 {
 				brcm,pins = <30 31>;
 				brcm,function = <BCM2835_FSEL_ALT3>;
 				brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>;
 			};
-			uart0_gpio32: uart0_gpio32 {
+			uart0_gpio32: uart0-gpio32 {
 				brcm,pins = <32 33>;
 				brcm,function = <BCM2835_FSEL_ALT3>;
 				brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>;
 			};
-			uart0_gpio36: uart0_gpio36 {
+			uart0_gpio36: uart0-gpio36 {
 				brcm,pins = <36 37>;
 				brcm,function = <BCM2835_FSEL_ALT2>;
 			};
-			uart0_ctsrts_gpio38: uart0_ctsrts_gpio38 {
+			uart0_ctsrts_gpio38: uart0-ctsrts-gpio38 {
 				brcm,pins = <38 39>;
 				brcm,function = <BCM2835_FSEL_ALT2>;
 			};
 
-			uart1_gpio14: uart1_gpio14 {
+			uart1_gpio14: uart1-gpio14 {
 				brcm,pins = <14 15>;
 				brcm,function = <BCM2835_FSEL_ALT5>;
 			};
-			uart1_ctsrts_gpio16: uart1_ctsrts_gpio16 {
+			uart1_ctsrts_gpio16: uart1-ctsrts-gpio16 {
 				brcm,pins = <16 17>;
 				brcm,function = <BCM2835_FSEL_ALT5>;
 			};
-			uart1_gpio32: uart1_gpio32 {
+			uart1_gpio32: uart1-gpio32 {
 				brcm,pins = <32 33>;
 				brcm,function = <BCM2835_FSEL_ALT5>;
 			};
-			uart1_ctsrts_gpio30: uart1_ctsrts_gpio30 {
+			uart1_ctsrts_gpio30: uart1-ctsrts-gpio30 {
 				brcm,pins = <30 31>;
 				brcm,function = <BCM2835_FSEL_ALT5>;
 			};
-			uart1_gpio40: uart1_gpio40 {
+			uart1_gpio40: uart1-gpio40 {
 				brcm,pins = <40 41>;
 				brcm,function = <BCM2835_FSEL_ALT5>;
 			};
-			uart1_ctsrts_gpio42: uart1_ctsrts_gpio42 {
+			uart1_ctsrts_gpio42: uart1-ctsrts-gpio42 {
 				brcm,pins = <42 43>;
 				brcm,function = <BCM2835_FSEL_ALT5>;
 			};
@@ -350,8 +352,6 @@
 			clocks = <&clocks BCM2835_CLOCK_VPU>,
 				 <&clocks BCM2835_CLOCK_DPI>;
 			clock-names = "core", "pixel";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			status = "disabled";
 		};
 
@@ -416,7 +416,7 @@
 			clocks = <&clocks BCM2835_CLOCK_PWM>;
 			assigned-clocks = <&clocks BCM2835_CLOCK_PWM>;
 			assigned-clock-rates = <10000000>;
-			#pwm-cells = <2>;
+			#pwm-cells = <3>;
 			status = "disabled";
 		};
 
@@ -454,6 +454,30 @@
 			status = "disabled";
 		};
 
+		csi0: csi@7e800000 {
+			compatible = "brcm,bcm2835-unicam";
+			reg = <0x7e800000 0x800>,
+			      <0x7e802000 0x4>;
+			reg-names = "unicam", "cmi";
+			interrupts = <2 6>;
+			brcm,num-data-lanes = <2>;
+			status = "disabled";
+			port {
+			};
+		};
+
+		csi1: csi@7e801000 {
+			compatible = "brcm,bcm2835-unicam";
+			reg = <0x7e801000 0x800>,
+			      <0x7e802004 0x4>;
+			reg-names = "unicam", "cmi";
+			interrupts = <2 7>;
+			brcm,num-data-lanes = <4>;
+			status = "disabled";
+			port {
+			};
+		};
+
 		i2c1: i2c@7e804000 {
 			compatible = "brcm,bcm2835-i2c";
 			reg = <0x7e804000 0x1000>;
diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts b/arch/arm/boot/dts/broadcom/bcm4708-asus-rt-ac56u.dts
index 8ed403767540..c80ac16ad949 100644
--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4708-asus-rt-ac56u.dts
@@ -28,40 +28,39 @@
 	leds {
 		compatible = "gpio-leds";
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:blue:usb3";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 		};
 
-		wan {
+		led-wan {
 			label = "bcm53xx:blue:wan";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
 		};
 
-		lan {
+		led-lan {
 			label = "bcm53xx:blue:lan";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 		};
 
-		power {
+		led-power {
 			label = "bcm53xx:blue:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		all {
+		led-all {
 			label = "bcm53xx:blue:all";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:blue:2ghz";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
 		};
 
-
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:blue:usb2";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
@@ -70,19 +69,19 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts b/arch/arm/boot/dts/broadcom/bcm4708-asus-rt-ac68u.dts
index 667b118ba4ee..3fe17bd7b86d 100644
--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4708-asus-rt-ac68u.dts
@@ -28,24 +28,24 @@
 	leds {
 		compatible = "gpio-leds";
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:blue:usb2";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 		};
 
-		power {
+		led-power {
 			label = "bcm53xx:blue:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		logo {
+		led-logo {
 			label = "bcm53xx:white:logo";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:blue:usb3";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
@@ -54,25 +54,25 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		brightness {
+		button-brightness {
 			label = "Backlight";
 			linux,code = <KEY_BRIGHTNESS_ZERO>;
 			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wxr-1750dhp.dts b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wxr-1750dhp.dts
new file mode 100644
index 000000000000..f5c95c9a712e
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wxr-1750dhp.dts
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Author: Taishi Shimizu <s.taishi14142@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "buffalo,wxr-1750dhp", "brcm,bcm4708";
+	model = "Buffalo WXR-1750DHP";
+
+	memory@0 {
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+		device_type = "memory";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-aoss {
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+			label = "AOSS";
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+
+		/* GPIO 3 is a switch button with AUTO / MANUAL. */
+		button-manual {
+			gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>;
+			label = "MANUAL";
+			linux,code = <BTN_0>;
+			linux,input-type = <EV_SW>;
+		};
+
+		button-restart {
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+		};
+
+		/* GPIO 8 and 9 are a tri-state switch button with
+		 * ROUTER / AP / WB.
+		 */
+		button-router {
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			label = "ROUTER";
+			linux,code = <BTN_1>;
+			linux,input-type = <EV_SW>;
+		};
+
+		button-wb {
+			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
+			label = "WB";
+			linux,code = <BTN_2>;
+			linux,input-type = <EV_SW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-internet {
+			color = <LED_COLOR_ID_WHITE>;
+			function = "internet";
+			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-power0 {
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-power1 {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-router0 {
+			color = <LED_COLOR_ID_AMBER>;
+			function = "router";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-router1 {
+			color = <LED_COLOR_ID_WHITE>;
+			function = "router";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-usb {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_USB;
+			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "usbport";
+			trigger-sources = <&xhci_port1 &ehci_port1 &ohci_port1>;
+		};
+	};
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "wan";
+		};
+
+		port@1 {
+			label = "lan4";
+		};
+
+		port@2 {
+			label = "lan3";
+		};
+
+		port@3 {
+			label = "lan2";
+		};
+
+		port@4 {
+			label = "lan1";
+		};
+	};
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp-common.dtsi b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp-common.dtsi
new file mode 100644
index 000000000000..9f9084269ef5
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp-common.dtsi
@@ -0,0 +1,193 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Buffalo WZR-1166DHP and WZR-1166DHP2
+ *
+ * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
+ * Copyright (C) 2022 SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com>
+ */
+
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	spi {
+		compatible = "spi-gpio";
+		num-chipselects = <1>;
+		sck-gpios = <&chipcommon 7 0>;
+		mosi-gpios = <&chipcommon 4 0>;
+		cs-gpios = <&chipcommon 6 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hc595: gpio_spi@0 {
+			compatible = "fairchild,74hc595";
+			reg = <0>;
+			registers-number = <1>;
+			spi-max-frequency = <100000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-usb {
+			/* label = "bcm53xx:blue:usb"; */
+			function = LED_FUNCTION_USB;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+					  <&xhci_port1>, <&ohci_port2>,
+					  <&ehci_port2>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-power0 {
+			/* label = "bcm53xx:red:power"; */
+			function = LED_FUNCTION_FAULT;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-power1 {
+			/* label = "bcm53xx:white:power"; */
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-router0 {
+			/*  label = "bcm53xx:blue:router"; */
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-router1 {
+			/* label = "bcm53xx:amber:router"; */
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wan {
+			/* label = "bcm53xx:blue:wan"; */
+			function = LED_FUNCTION_WAN;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wireless0 {
+			/* label = "bcm53xx:blue:wireless"; */
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wireless1 {
+			/* label = "bcm53xx:amber:wireless"; */
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+
+		button-aoss {
+			label = "AOSS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Commit mode set by switch? */
+		button-mode {
+			label = "Mode";
+			linux,code = <KEY_SETUP>;
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Switch: AP mode */
+		button-sw-ap {
+			label = "AP";
+			linux,code = <BTN_0>;
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+
+		button-eject {
+			label = "USB eject";
+			linux,code = <KEY_EJECTCD>;
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan1";
+		};
+
+		port@1 {
+			label = "lan2";
+		};
+
+		port@2 {
+			label = "lan3";
+		};
+
+		port@3 {
+			label = "lan4";
+		};
+
+		port@4 {
+			label = "wan";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp.dts b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp.dts
new file mode 100644
index 000000000000..8e506269fa1a
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindigs for Buffalo WZR-1166DHP
+ *
+ * Copyright (C) 2022 SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708-buffalo-wzr-1166dhp-common.dtsi"
+
+/ {
+	compatible = "buffalo,wzr-1166dhp", "brcm,bcm4708";
+	model = "Buffalo WZR-1166DHP";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp2.dts b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp2.dts
new file mode 100644
index 000000000000..596129027074
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp2.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindigs for Buffalo WZR-1166DHP2
+ *
+ * Copyright (C) 2022 SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708-buffalo-wzr-1166dhp-common.dtsi"
+
+/ {
+	compatible = "buffalo,wzr-1166dhp2", "brcm,bcm4708";
+	model = "Buffalo WZR-1166DHP2";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+};
diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1750dhp.dts
index ff31ce45831a..95ef6ca7210b 100644
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1750dhp.dts
@@ -28,8 +28,8 @@
 	spi {
 		compatible = "spi-gpio";
 		num-chipselects = <1>;
-		gpio-sck = <&chipcommon 7 0>;
-		gpio-mosi = <&chipcommon 4 0>;
+		sck-gpios = <&chipcommon 7 0>;
+		mosi-gpios = <&chipcommon 4 0>;
 		cs-gpios = <&chipcommon 6 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -49,7 +49,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		usb {
+		led-usb {
 			label = "bcm53xx:blue:usb";
 			gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
@@ -58,40 +58,40 @@
 			linux,default-trigger = "usbport";
 		};
 
-		power0 {
+		led-power0 {
 			label = "bcm53xx:red:power";
 			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
 		};
 
-		power1 {
+		led-power1 {
 			label = "bcm53xx:white:power";
 			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		router0 {
+		led-router0 {
 			label = "bcm53xx:blue:router";
 			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		router1 {
+		led-router1 {
 			label = "bcm53xx:amber:router";
 			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan {
+		led-wan {
 			label = "bcm53xx:blue:wan";
 			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		wireless0 {
+		led-wireless0 {
 			label = "bcm53xx:blue:wireless";
 			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
 		};
 
-		wireless1 {
+		led-wireless1 {
 			label = "bcm53xx:amber:wireless";
 			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
 		};
@@ -100,33 +100,33 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
 
-		aoss {
+		button-aoss {
 			label = "AOSS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
 		};
 
 		/* Commit mode set by switch? */
-		mode {
+		button-mode {
 			label = "Mode";
 			linux,code = <KEY_SETUP>;
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 		};
 
 		/* Switch: AP mode */
-		sw_ap {
+		button-sw-ap {
 			label = "AP";
 			linux,code = <BTN_0>;
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
 
-		eject {
+		button-eject {
 			label = "USB eject";
 			linux,code = <KEY_EJECTCD>;
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts b/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6300-v1.dts
index 5bac1e15775a..0ed25bf71f0d 100644
--- a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6300-v1.dts
@@ -29,13 +29,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts b/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6500-v2.dts
index cd797b4202ad..0454423fe166 100644
--- a/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6500-v2.dts
@@ -19,19 +19,20 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-luxul-xap-1510.dts b/arch/arm/boot/dts/broadcom/bcm4708-luxul-xap-1510.dts
new file mode 100644
index 000000000000..72e960c888ac
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4708-luxul-xap-1510.dts
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2016 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+	compatible = "luxul,xap-1510-v1", "brcm,bcm4708";
+	model = "Luxul XAP-1510 V1";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-5ghz {
+			label = "bcm53xx:blue:5ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		led-2ghz {
+			label = "bcm53xx:blue:2ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "poe";
+		};
+
+		port@4 {
+			label = "lan";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/broadcom/bcm4708-luxul-xwc-1000.dts
index c81944cd6d0b..750e17482371 100644
--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4708-luxul-xwc-1000.dts
@@ -24,6 +24,14 @@
 		reg = <0x00000000 0x08000000>;
 	};
 
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+		};
+	};
+
 	nand_controller: nand-controller@18028000 {
 		nand@0 {
 			partitions {
@@ -42,7 +50,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		status {
+		led-status {
 			label = "bcm53xx:green:status";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "timer";
@@ -52,7 +60,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
@@ -60,6 +68,11 @@
 	};
 };
 
+&gmac0 {
+	nvmem-cells = <&et0macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
 &spi_nor {
 	status = "okay";
 };
@@ -69,14 +82,19 @@
 
 	ports {
 		port@4 {
-			reg = <4>;
 			label = "lan";
 		};
 
 		port@5 {
-			reg = <5>;
 			label = "cpu";
-			ethernet = <&gmac0>;
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6250.dts
index 61c7b137607e..2bdbc7d18b0e 100644
--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6250.dts
@@ -13,14 +13,14 @@
 #include "bcm5301x-nand-cs0-bch8.dtsi"
 
 / {
-	compatible = "netgear,r6250v1", "brcm,bcm4708";
+	compatible = "netgear,r6250-v1", "brcm,bcm4708";
 	model = "Netgear R6250 V1 (BCM4708)";
 
 	chosen {
 		bootargs = "console=ttyS0,115200 earlycon";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>,
 		      <0x88000000 0x08000000>;
@@ -29,24 +29,24 @@
 	leds {
 		compatible = "gpio-leds";
 
-		logo {
+		led-logo {
 			label = "bcm53xx:white:logo";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		power0 {
+		led-power0 {
 			label = "bcm53xx:green:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		power1 {
+		led-power1 {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		usb {
+		led-usb {
 			label = "bcm53xx:blue:usb";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
@@ -54,7 +54,7 @@
 			linux,default-trigger = "usbport";
 		};
 
-		wireless {
+		led-wireless {
 			label = "bcm53xx:blue:wireless";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
@@ -63,19 +63,19 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
 		};
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
@@ -94,3 +94,41 @@
 &usb3_phy {
 	status = "okay";
 };
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan4";
+		};
+
+		port@1 {
+			label = "lan3";
+		};
+
+		port@2 {
+			label = "lan2";
+		};
+
+		port@3 {
+			label = "lan1";
+		};
+
+		port@4 {
+			label = "wan";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6300-v2.dts
index 4c60eda296d9..77396730bdd3 100644
--- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6300-v2.dts
@@ -12,7 +12,7 @@
 #include "bcm5301x-nand-cs0-bch8.dtsi"
 
 / {
-	compatible = "netgear,r6300v2", "brcm,bcm4708";
+	compatible = "netgear,r6300-v2", "brcm,bcm4708";
 	model = "Netgear R6300 V2 (BCM4708)";
 
 	chosen {
@@ -28,29 +28,29 @@
 	leds {
 		compatible = "gpio-leds";
 
-		logo {
+		led-logo {
 			label = "bcm53xx:white:logo";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		power0 {
+		led-power0 {
 			label = "bcm53xx:green:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 		};
 
-		power1 {
+		led-power1 {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		usb {
+		led-usb {
 			label = "bcm53xx:blue:usb";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
 		};
 
-		wireless {
+		led-wireless {
 			label = "bcm53xx:blue:wireless";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
@@ -59,19 +59,19 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
 		};
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/broadcom/bcm4708-smartrg-sr400ac.dts
index 9ca6d1b2590d..b226bef3369c 100644
--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4708-smartrg-sr400ac.dts
@@ -28,64 +28,64 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power-white {
+		led-power-white {
 			label = "bcm53xx:white:power";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		power-amber {
+		led-power-amber {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
 		};
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:white:usb2";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port2>, <&ehci_port2>;
 			linux,default-trigger = "usbport";
 		};
 
-		usb3-white {
+		led-usb3-white {
 			label = "bcm53xx:white:usb3";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&xhci_port1>;
 			linux,default-trigger = "usbport";
 		};
 
-		usb3-green {
+		led-usb3-green {
 			label = "bcm53xx:green:usb3";
 			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>;
 			linux,default-trigger = "usbport";
 		};
 
-		wps {
+		led-wps {
 			label = "bcm53xx:white:wps";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
 		};
 
-		status-red {
+		led-status-red {
 			label = "bcm53xx:red:status";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
 		};
 
-		status-green {
+		led-status-green {
 			label = "bcm53xx:green:status";
 			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
 		};
 
-		status-blue {
+		led-status-blue {
 			label = "bcm53xx:blue:status";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan-white {
+		led-wan-white {
 			label = "bcm53xx:white:wan";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan-red {
+		led-wan-red {
 			label = "bcm53xx:red:wan";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
 		};
@@ -94,19 +94,19 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
@@ -123,34 +123,35 @@
 
 	ports {
 		port@0 {
-			reg = <0>;
 			label = "lan4";
 		};
 
 		port@1 {
-			reg = <1>;
 			label = "lan3";
 		};
 
 		port@2 {
-			reg = <2>;
 			label = "lan2";
 		};
 
 		port@3 {
-			reg = <3>;
 			label = "lan1";
 		};
 
 		port@4 {
-			reg = <4>;
 			label = "wan";
 		};
 
 		port@5 {
-			reg = <5>;
 			label = "cpu";
-			ethernet = <&gmac0>;
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/bcm4708.dtsi b/arch/arm/boot/dts/broadcom/bcm4708.dtsi
index 1a19e97a987d..1a19e97a987d 100644
--- a/arch/arm/boot/dts/bcm4708.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm4708.dtsi
diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/broadcom/bcm47081-asus-rt-n18u.dts
index 0e273c598732..3854db0118a9 100644
--- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47081-asus-rt-n18u.dts
@@ -28,30 +28,30 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power {
+		led-power {
 			label = "bcm53xx:blue:power";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:blue:usb2";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		wan {
+		led-wan {
 			label = "bcm53xx:blue:wan";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		lan {
+		led-lan {
 			label = "bcm53xx:blue:lan";
 			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:blue:usb3";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
@@ -60,13 +60,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/broadcom/bcm47081-buffalo-wzr-600dhp2.dts
index d857751ec507..192b8db5a89c 100644
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47081-buffalo-wzr-600dhp2.dts
@@ -28,8 +28,8 @@
 	spi {
 		compatible = "spi-gpio";
 		num-chipselects = <1>;
-		gpio-sck = <&chipcommon 7 0>;
-		gpio-mosi = <&chipcommon 4 0>;
+		sck-gpios = <&chipcommon 7 0>;
+		mosi-gpios = <&chipcommon 4 0>;
 		cs-gpios = <&chipcommon 6 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -49,40 +49,40 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power0 {
+		led-power0 {
 			label = "bcm53xx:green:power";
 			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		power1 {
+		led-power1 {
 			label = "bcm53xx:red:power";
 			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
 		};
 
-		router0 {
+		led-router0 {
 			label = "bcm53xx:green:router";
 			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		router1 {
+		led-router1 {
 			label = "bcm53xx:amber:router";
 			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan {
+		led-wan {
 			label = "bcm53xx:green:wan";
 			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		wireless0 {
+		led-wireless0 {
 			label = "bcm53xx:green:wireless";
 			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
 		};
 
-		wireless1 {
+		led-wireless1 {
 			label = "bcm53xx:amber:wireless";
 			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
 		};
@@ -91,29 +91,67 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		aoss {
+		button-aoss {
 			label = "AOSS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
 
 		/* Switch device mode? */
-		mode {
+		button-mode {
 			label = "Mode";
 			linux,code = <KEY_SETUP>;
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
 
-		eject {
+		button-eject {
 			label = "USB eject";
 			linux,code = <KEY_EJECTCD>;
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
 		};
 	};
 };
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan1";
+		};
+
+		port@1 {
+			label = "lan2";
+		};
+
+		port@2 {
+			label = "lan3";
+		};
+
+		port@3 {
+			label = "lan4";
+		};
+
+		port@4 {
+			label = "wan";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts b/arch/arm/boot/dts/broadcom/bcm47081-buffalo-wzr-900dhp.dts
index 8b1a05a0f1a1..7655e4ff2d1c 100644
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47081-buffalo-wzr-900dhp.dts
@@ -28,8 +28,8 @@
 	spi {
 		compatible = "spi-gpio";
 		num-chipselects = <1>;
-		gpio-sck = <&chipcommon 7 0>;
-		gpio-mosi = <&chipcommon 4 0>;
+		sck-gpios = <&chipcommon 7 0>;
+		mosi-gpios = <&chipcommon 4 0>;
 		cs-gpios = <&chipcommon 6 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -49,45 +49,45 @@
 	leds {
 		compatible = "gpio-leds";
 
-		usb {
+		led-usb {
 			label = "bcm53xx:green:usb";
 			gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
 		};
 
-		power0 {
+		led-power0 {
 			label = "bcm53xx:green:power";
 			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		power1 {
+		led-power1 {
 			label = "bcm53xx:red:power";
 			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
 		};
 
-		router0 {
+		led-router0 {
 			label = "bcm53xx:green:router";
 			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		router1 {
+		led-router1 {
 			label = "bcm53xx:amber:router";
 			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan {
+		led-wan {
 			label = "bcm53xx:green:wan";
 			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		wireless0 {
+		led-wireless0 {
 			label = "bcm53xx:green:wireless";
 			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
 		};
 
-		wireless1 {
+		led-wireless1 {
 			label = "bcm53xx:amber:wireless";
 			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
 		};
@@ -96,7 +96,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/broadcom/bcm47081-luxul-xap-1410.dts b/arch/arm/boot/dts/broadcom/bcm47081-luxul-xap-1410.dts
new file mode 100644
index 000000000000..0198b5f9e4a7
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47081-luxul-xap-1410.dts
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47081.dtsi"
+
+/ {
+	compatible = "luxul,xap-1410-v1", "brcm,bcm47081", "brcm,bcm4708";
+	model = "Luxul XAP-1410 V1";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-5ghz {
+			label = "bcm53xx:blue:5ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		led-2ghz {
+			label = "bcm53xx:blue:2ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@4 {
+			label = "poe";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts b/arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts
index 9316a36434f7..73ff1694a4a0 100644
--- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts
@@ -9,7 +9,7 @@
 #include "bcm5301x-nand-cs0-bch4.dtsi"
 
 / {
-	compatible = "luxul,xwr-1200v1", "brcm,bcm47081", "brcm,bcm4708";
+	compatible = "luxul,xwr-1200-v1", "brcm,bcm47081", "brcm,bcm4708";
 	model = "Luxul XWR-1200 V1";
 
 	chosen {
@@ -24,67 +24,71 @@
 	nvram@1eff0000 {
 		compatible = "brcm,nvram";
 		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+			#nvmem-cell-cells = <1>;
+		};
 	};
 
 	leds {
 		compatible = "gpio-leds";
 
-		power {
+		led-power {
 			label = "bcm53xx:green:power";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		lan3 {
+		led-lan3 {
 			label = "bcm53xx:green:lan3";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		lan4 {
+		led-lan4 {
 			label = "bcm53xx:green:lan4";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		wan {
+		led-wan {
 			label = "bcm53xx:green:wan";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		lan2 {
+		led-lan2 {
 			label = "bcm53xx:green:lan2";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		usb {
+		led-usb {
 			label = "bcm53xx:green:usb";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
 			trigger-sources = <&ohci_port2>, <&ehci_port2>;
 			linux,default-trigger = "usbport";
 		};
 
-		status {
+		led-status {
 			label = "bcm53xx:green:status";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "timer";
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:green:2ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:green:5ghz";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		lan1 {
+		led-lan1 {
 			label = "bcm53xx:green:lan1";
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
@@ -94,7 +98,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
@@ -106,6 +110,11 @@
 	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
 };
 
+&gmac0 {
+	nvmem-cells = <&et0macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
 &spi_nor {
 	status = "okay";
 };
@@ -115,34 +124,37 @@
 
 	ports {
 		port@0 {
-			reg = <0>;
 			label = "lan4";
 		};
 
 		port@1 {
-			reg = <1>;
 			label = "lan3";
 		};
 
 		port@2 {
-			reg = <2>;
 			label = "lan2";
 		};
 
 		port@3 {
-			reg = <3>;
 			label = "lan1";
 		};
 
 		port@4 {
-			reg = <4>;
 			label = "wan";
+			nvmem-cells = <&et0macaddr 5>;
+			nvmem-cell-names = "mac-address";
 		};
 
 		port@5 {
-			reg = <5>;
 			label = "cpu";
-			ethernet = <&gmac0>;
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts b/arch/arm/boot/dts/broadcom/bcm47081-tplink-archer-c5-v2.dts
index 12e34a0439b4..b6a5886698b2 100644
--- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47081-tplink-archer-c5-v2.dts
@@ -23,50 +23,50 @@
 	leds {
 		compatible = "gpio-leds";
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:green:2ghz";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
 		};
 
-		lan {
+		led-lan {
 			label = "bcm53xx:green:lan";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
 		};
 
-		usb2-port1 {
+		led-usb2-port1 {
 			label = "bcm53xx:green:usb2-port1";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>;
 			linux,default-trigger = "usbport";
 		};
 
-		power {
+		led-power {
 			label = "bcm53xx:green:power";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		wan-green {
+		led-wan-green {
 			label = "bcm53xx:green:wan";
 			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
 		};
 
-		wps {
+		led-wps {
 			label = "bcm53xx:green:wps";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan-amber {
+		led-wan-amber {
 			label = "bcm53xx:amber:wan";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:green:5ghz";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
 		};
 
-		usb2-port2 {
+		led-usb2-port2 {
 			label = "bcm53xx:green:usb2-port2";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port2>, <&ehci_port2>;
@@ -77,13 +77,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
@@ -95,30 +95,15 @@
 	status = "okay";
 
 	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		boot@0 {
-			label = "boot";
-			reg = <0x000000 0x040000>;
-			read-only;
-		};
+		compatible = "tplink,safeloader-partitions";
+		partitions-table-offset = <0xe50000>;
 
-		os-image@100000 {
-			label = "os-image";
-			reg = <0x040000 0x200000>;
+		partition-os-image {
 			compatible = "brcm,trx";
 		};
 
-		rootfs@240000 {
-			label = "rootfs";
-			reg = <0x240000 0xc00000>;
-		};
-
-		nvram@ff0000 {
-			label = "nvram";
-			reg = <0xff0000 0x010000>;
+		partition-file-system {
+			linux,rootfs;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/bcm47081.dtsi b/arch/arm/boot/dts/broadcom/bcm47081.dtsi
index ed13af028528..ed13af028528 100644
--- a/arch/arm/boot/dts/bcm47081.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm47081.dtsi
diff --git a/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts b/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts
new file mode 100644
index 000000000000..3da2daee0c84
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Author: Tom Brautaset <tbrautaset@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4709.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "asus,rt-ac3200", "brcm,bcm4709", "brcm,bcm4708";
+	model = "ASUS RT-AC3200";
+
+	memory@0 {
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+		device_type = "memory";
+	};
+
+	nvram@1c080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1c080000 0x00180000>;
+
+		et0macaddr: et0macaddr {
+			#nvmem-cell-cells = <1>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wifi {
+			label = "Wi-Fi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wan-red {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_WAN;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wps {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_WPS;
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+	nvmem-cells = <&et0macaddr 1>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac2 {
+	nvmem-cells = <&et0macaddr 2>;
+	nvmem-cell-names = "mac-address";
+};
+
+&nandcs {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			reg = <0x00000000 0x00080000>;
+			label = "boot";
+			read-only;
+		};
+
+		partition@80000 {
+			reg = <0x00080000 0x00180000>;
+			label = "nvram";
+		};
+
+		partition@200000 {
+			compatible = "brcm,trx";
+			reg = <0x00200000 0x07e00000>;
+			label = "firmware";
+		};
+	};
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "wan";
+		};
+
+		port@1 {
+			label = "lan4";
+		};
+
+		port@2 {
+			label = "lan3";
+		};
+
+		port@3 {
+			label = "lan2";
+		};
+
+		port@4 {
+			label = "lan1";
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac87u.dts
index 6c6bb7b17d27..59400217f8c3 100644
--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac87u.dts
@@ -19,27 +19,33 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>,
 		      <0x88000000 0x08000000>;
 	};
 
+	nvram@1c080000 {
+		et1macaddr: et1macaddr {
+			#nvmem-cell-cells = <1>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
-		wps {
+		led-wps {
 			label = "bcm53xx:blue:wps";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
 		};
 
-		power {
+		led-power {
 			label = "bcm53xx:blue:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		wan {
+		led-wan {
 			label = "bcm53xx:red:wan";
 			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
 		};
@@ -47,16 +53,14 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
@@ -64,6 +68,11 @@
 	};
 };
 
+&gmac0 {
+	nvmem-cells = <&et1macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
 &usb3_phy {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts b/arch/arm/boot/dts/broadcom/bcm4709-buffalo-wxr-1900dhp.dts
index d29e7f80ea6a..b7cd2faa30ce 100644
--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4709-buffalo-wxr-1900dhp.dts
@@ -19,7 +19,7 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>,
 		      <0x88000000 0x18000000>;
@@ -28,48 +28,48 @@
 	leds {
 		compatible = "gpio-leds";
 
-		usb {
+		led-usb {
 			label = "bcm53xx:green:usb";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
 		};
 
-		power-amber {
+		led-power-amber {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
 		};
 
-		power-white {
+		led-power-white {
 			label = "bcm53xx:white:power";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		router-amber {
+		led-router-amber {
 			label = "bcm53xx:amber:router";
 			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
 		};
 
-		router-white {
+		led-router-white {
 			label = "bcm53xx:white:router";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan-amber {
+		led-wan-amber {
 			label = "bcm53xx:amber:wan";
 			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan-white {
+		led-wan-white {
 			label = "bcm53xx:white:wan";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
 		};
 
-		wireless-amber {
+		led-wireless-amber {
 			label = "bcm53xx:amber:wireless";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
 		};
 
-		wireless-white {
+		led-wireless-white {
 			label = "bcm53xx:white:wireless";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
 		};
@@ -77,42 +77,40 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		power {
+		button-power {
 			label = "Power";
 			linux,code = <KEY_POWER>;
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
 		};
 
-		aoss {
+		button-aoss {
 			label = "AOSS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
 		};
 
 		/* Commit mode set by switch? */
-		mode {
+		button-mode {
 			label = "Mode";
 			linux,code = <KEY_SETUP>;
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
 		};
 
 		/* Switch: AP mode */
-		sw_ap {
+		button-sw-ap {
 			label = "AP";
 			linux,code = <BTN_0>;
 			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
 		};
 
-		eject {
+		button-eject {
 			label = "USB eject";
 			linux,code = <KEY_EJECTCD>;
 			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dts b/arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dts
new file mode 100644
index 000000000000..2ba5adf2b7e7
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dts
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+/dts-v1/;
+
+#include "bcm4709.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "linksys,ea9200", "brcm,bcm4709", "brcm,bcm4708";
+	model = "Linksys EA9200";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	nvram@1c080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1c080000 0x180000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan1";
+		};
+
+		port@1 {
+			label = "lan2";
+		};
+
+		port@2 {
+			label = "lan3";
+		};
+
+		port@3 {
+			label = "lan4";
+		};
+
+		port@4 {
+			label = "wan";
+		};
+
+		port@5 {
+			status = "disabled";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			label = "cpu";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/broadcom/bcm4709-netgear-r7000.dts
index 7989a53597d4..24ba8f8f9bf3 100644
--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4709-netgear-r7000.dts
@@ -19,7 +19,7 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>,
 		      <0x88000000 0x08000000>;
@@ -28,43 +28,43 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power-white {
+		led-power-white {
 			label = "bcm53xx:white:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		power-amber {
+		led-power-amber {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:white:5ghz";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:white:2ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		led-wps {
 			label = "bcm53xx:white:wps";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
 		};
 
-		wireless {
+		led-wireless {
 			label = "bcm53xx:white:wireless";
 			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:white:usb3";
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
 		};
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:white:usb2";
 			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
 		};
@@ -72,22 +72,20 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
 		};
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts
index 87b655be674c..127ca8741220 100644
--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts
@@ -30,7 +30,7 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>,
 		      <0x88000000 0x08000000>;
@@ -39,59 +39,59 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power-white {
+		led-power-white {
 			label = "bcm53xx:white:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		power-amber {
+		led-power-amber {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		wan-white {
+		led-wan-white {
 			label = "bcm53xx:white:wan";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		wan-amber {
+		led-wan-amber {
 			label = "bcm53xx:amber:wan";
 			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
 		};
 
-		5ghz-1 {
+		led-5ghz-1 {
 			label = "bcm53xx:white:5ghz-1";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:white:2ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 		};
 
-		wireless {
+		led-wireless {
 			label = "bcm53xx:white:wireless";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
 		};
 
-		wps {
+		led-wps {
 			label = "bcm53xx:white:wps";
 			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
 		};
 
-		5ghz-2 {
+		led-5ghz-2 {
 			label = "bcm53xx:white:5ghz-2";
 			gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:white:usb3";
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
 		};
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:white:usb2";
 			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
 		};
@@ -99,28 +99,26 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
 		};
 
-		brightness {
+		button-brightness {
 			label = "Backlight";
 			linux,code = <KEY_BRIGHTNESS_ZERO>;
 			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
@@ -139,8 +137,10 @@
 		#size-cells = <2>;
 
 		wifi@0,1,0 {
+			compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
 			reg = <0x0000 0 0 0 0>;
 			ieee80211-freq-limit = <5735000 5835000>;
+			brcm,ccode-map = "JP-JP-78", "US-Q2-86";
 		};
 	};
 };
@@ -161,6 +161,19 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
+			bridge@1,0 {
+				reg = <0x800 0 0 0 0>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+
+				wifi@0,0 {
+					compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
+					reg = <0x0000 0 0 0 0>;
+					brcm,ccode-map = "JP-JP-78", "US-Q2-86";
+				};
+			};
+
 			bridge@1,2,2 {
 				reg = <0x1000 0 0 0 0>;
 
@@ -168,8 +181,10 @@
 				#size-cells = <2>;
 
 				wifi@1,4,0 {
+					compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
 					reg = <0x0000 0 0 0 0>;
 					ieee80211-freq-limit = <5170000 5730000>;
+					brcm,ccode-map = "JP-JP-78", "US-Q2-86";
 				};
 			};
 		};
@@ -187,3 +202,51 @@
 &usb3_phy {
 	status = "okay";
 };
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan1";
+		};
+
+		port@1 {
+			label = "lan2";
+		};
+
+		port@2 {
+			label = "lan3";
+		};
+
+		port@3 {
+			label = "lan4";
+		};
+
+		port@4 {
+			label = "wan";
+		};
+
+		port@5 {
+			status = "disabled";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		port@7 {
+			status = "disabled";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		port@8 {
+			label = "cpu";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts b/arch/arm/boot/dts/broadcom/bcm4709-tplink-archer-c9-v1.dts
index f806be5da723..5a8b2b1567e6 100644
--- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4709-tplink-archer-c9-v1.dts
@@ -15,7 +15,7 @@
 		bootargs = "console=ttyS0,115200 earlycon";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>;
 	};
@@ -23,27 +23,27 @@
 	leds {
 		compatible = "gpio-leds";
 
-		lan {
+		led-lan {
 			label = "bcm53xx:blue:lan";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
 		};
 
-		wps {
+		led-wps {
 			label = "bcm53xx:blue:wps";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:blue:2ghz";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:blue:5ghz";
 			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:blue:usb3";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
@@ -51,24 +51,24 @@
 			linux,default-trigger = "usbport";
 		};
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:blue:usb2";
 			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port2>, <&ehci_port2>;
 			linux,default-trigger = "usbport";
 		};
 
-		wan-blue {
+		led-wan-blue {
 			label = "bcm53xx:blue:wan";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan-amber {
+		led-wan-amber {
 			label = "bcm53xx:amber:wan";
 			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
 		};
 
-		power {
+		led-power {
 			label = "bcm53xx:blue:power";
 			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
@@ -77,16 +77,14 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
@@ -106,30 +104,15 @@
 	status = "okay";
 
 	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		boot@0 {
-			label = "boot";
-			reg = <0x000000 0x040000>;
-			read-only;
-		};
+		compatible = "tplink,safeloader-partitions";
+		partitions-table-offset = <0xe50000>;
 
-		os-image@100000 {
-			label = "os-image";
-			reg = <0x040000 0x200000>;
+		partition-os-image {
 			compatible = "brcm,trx";
 		};
 
-		rootfs@240000 {
-			label = "rootfs";
-			reg = <0x240000 0xc00000>;
-		};
-
-		nvram@ff0000 {
-			label = "nvram";
-			reg = <0xff0000 0x010000>;
+		partition-file-system {
+			linux,rootfs;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/bcm4709.dtsi b/arch/arm/boot/dts/broadcom/bcm4709.dtsi
index cba3d910bed8..cba3d910bed8 100644
--- a/arch/arm/boot/dts/bcm4709.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm4709.dtsi
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dts b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dts
new file mode 100644
index 000000000000..1655ac95769c
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Author: Arınç ÜNAL <arinc.unal@arinc9.com>
+ */
+
+/dts-v1/;
+
+#include "bcm47094-asus-rt-ac3100.dtsi"
+
+/ {
+	compatible = "asus,rt-ac3100", "brcm,bcm47094", "brcm,bcm4708";
+	model = "ASUS RT-AC3100";
+
+	nvram@1c080000 {
+		et0macaddr: et0macaddr {
+			#nvmem-cell-cells = <1>;
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+	nvmem-cells = <&et0macaddr 1>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac2 {
+	nvmem-cells = <&et0macaddr 2>;
+	nvmem-cell-names = "mac-address";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dtsi b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dtsi
new file mode 100644
index 000000000000..2cfaaabc7a6a
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dtsi
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Author: Arınç ÜNAL <arinc.unal@arinc9.com>
+ */
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	memory@0 {
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+		device_type = "memory";
+	};
+
+	nvram@1c080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1c080000 0x00180000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-led {
+			label = "Backlight";
+			linux,code = <KEY_BRIGHTNESS_ZERO>;
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+
+		button-reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wifi {
+			label = "Wi-Fi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-lan {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_LAN;
+			gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>;
+		};
+
+		led-power {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-usb2 {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_USB;
+			function-enumerator = <1>;
+			gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ehci_port2>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-usb3 {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_USB;
+			function-enumerator = <2>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ehci_port1>, <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-wan-red {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_WAN;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wps {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_WPS;
+			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&nandcs {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			reg = <0x00000000 0x00080000>;
+			label = "boot";
+			read-only;
+		};
+
+		partition@80000 {
+			reg = <0x00080000 0x00180000>;
+			label = "nvram";
+		};
+
+		partition@200000 {
+			compatible = "brcm,trx";
+			reg = <0x00200000 0x07e00000>;
+			label = "firmware";
+		};
+	};
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan4";
+		};
+
+		port@1 {
+			label = "lan3";
+		};
+
+		port@2 {
+			label = "lan2";
+		};
+
+		port@3 {
+			label = "lan1";
+		};
+
+		port@4 {
+			label = "wan";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+
+		port@7 {
+			label = "cpu";
+		};
+
+		port@8 {
+			label = "cpu";
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac5300.dts b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac5300.dts
new file mode 100644
index 000000000000..01ec8c03686a
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac5300.dts
@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Author: Tom Brautaset <tbrautaset@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "asus,rt-ac5300", "brcm,bcm47094", "brcm,bcm4708";
+	model = "ASUS RT-AC5300";
+
+	memory@0 {
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+		device_type = "memory";
+	};
+
+	nvram@1c080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1c080000 0x00180000>;
+
+		et1macaddr: et1macaddr {
+			#nvmem-cell-cells = <1>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wifi {
+			label = "Wi-Fi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-lan {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_LAN;
+			gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>;
+		};
+
+		led-power {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wan-red {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_WAN;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wps {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_WPS;
+			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&et1macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+	nvmem-cells = <&et1macaddr 1>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac2 {
+	nvmem-cells = <&et1macaddr 2>;
+	nvmem-cell-names = "mac-address";
+};
+
+&nandcs {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			reg = <0x00000000 0x00080000>;
+			label = "boot";
+			read-only;
+		};
+
+		partition@80000 {
+			reg = <0x00080000 0x00180000>;
+			label = "nvram";
+		};
+
+		partition@200000 {
+			compatible = "brcm,trx";
+			reg = <0x00200000 0x07e00000>;
+			label = "firmware";
+		};
+	};
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "wan";
+		};
+
+		port@1 {
+			label = "lan1";
+		};
+
+		port@2 {
+			label = "lan2";
+		};
+
+		port@3 {
+			label = "lan3";
+		};
+
+		port@4 {
+			label = "lan4";
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts
new file mode 100644
index 000000000000..a197f447fd97
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Author: Arınç ÜNAL <arinc.unal@arinc9.com>
+ */
+
+/dts-v1/;
+
+#include "bcm47094-asus-rt-ac3100.dtsi"
+
+/ {
+	compatible = "asus,rt-ac88u", "brcm,bcm47094", "brcm,bcm4708";
+	model = "ASUS RT-AC88U";
+
+	nvram@1c080000 {
+		et1macaddr: et1macaddr {
+			#nvmem-cell-cells = <1>;
+		};
+	};
+
+	switch {
+		compatible = "realtek,rtl8365mb";
+		mdc-gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+		mdio-gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+		realtek,disable-leds;
+		dsa,member = <1 0>;
+
+		mdio {
+			compatible = "realtek,smi-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ethphy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			ethphy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+
+			ethphy2: ethernet-phy@2 {
+				reg = <2>;
+			};
+
+			ethphy3: ethernet-phy@3 {
+				reg = <3>;
+			};
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan5";
+				phy-handle = <&ethphy0>;
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan6";
+				phy-handle = <&ethphy1>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan7";
+				phy-handle = <&ethphy2>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan8";
+				phy-handle = <&ethphy3>;
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "cpu";
+				ethernet = <&sw0_p5>;
+				phy-mode = "rgmii";
+				tx-internal-delay-ps = <2000>;
+				rx-internal-delay-ps = <2100>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+					pause;
+				};
+			};
+		};
+	};
+};
+
+&gmac0 {
+	status = "disabled";
+};
+
+&gmac1 {
+	nvmem-cells = <&et1macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac2 {
+	nvmem-cells = <&et1macaddr 1>;
+	nvmem-cell-names = "mac-address";
+};
+
+&srab {
+	dsa,member = <0 0>;
+
+	ports {
+		sw0_p5: port@5 {
+			/delete-property/ethernet;
+
+			label = "extsw";
+			phy-mode = "rgmii";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+				pause;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts
new file mode 100644
index 000000000000..c5099defe9f9
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for D-Link DIR-885L
+ *
+ * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch1.dtsi"
+
+/ {
+	compatible = "dlink,dir-885l", "brcm,bcm47094", "brcm,bcm4708";
+	model = "D-Link DIR-885L";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	nvram@1e3f0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1e3f0000 0x10000>;
+
+		et2macaddr: et2macaddr {
+			#nvmem-cell-cells = <1>;
+		};
+	};
+
+	nand_controller: nand-controller@18028000 {
+		nand@0 {
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					compatible = "seama";
+					label = "firmware";
+					reg = <0x00000000 0x08000000>;
+				};
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power-white {
+			label = "bcm53xx:white:power";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wan-white {
+			label = "bcm53xx:white:wan";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+		};
+
+		led-power-amber {
+			label = "bcm53xx:amber:power";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wan-amber {
+			label = "bcm53xx:amber:wan";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb3-white {
+			label = "bcm53xx:white:usb3";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+					  <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-2ghz {
+			label = "bcm53xx:white:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5ghz {
+			label = "bcm53xx:white:5ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Switch: router / extender */
+		button-extender {
+			label = "Extender";
+			linux,code = <BTN_0>;
+			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&gmac0 {
+	nvmem-cells = <&et2macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan4";
+		};
+
+		port@1 {
+			label = "lan3";
+		};
+
+		port@2 {
+			label = "lan2";
+		};
+
+		port@3 {
+			label = "lan1";
+		};
+
+		port@4 {
+			label = "wan";
+			nvmem-cells = <&et2macaddr 3>;
+			nvmem-cell-names = "mac-address";
+		};
+
+		port@5 {
+			status = "disabled";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			label = "cpu";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts b/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts
new file mode 100644
index 000000000000..3124dfd01b94
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts
@@ -0,0 +1,208 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device tree for D-Link DIR-890L
+ * D-Link calls this board "WRGAC36"
+ * this router has the same looks and form factor as D-Link DIR-885L.
+ *
+ * Some differences from DIR-885L include a separate USB2 port, separate LEDs
+ * for USB2 and USB3, a separate VCC supply for the USB2 slot and no
+ * router/extender switch is mounted (there is an empty mount point on the
+ * PCB) so this device is a pure router. Also the LAN ports are in the right
+ * order.
+ *
+ * Based on the device tree for DIR-885L
+ * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
+ * Copyright (C) 2022 Linus Walleij
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch1.dtsi"
+
+/ {
+	compatible = "dlink,dir-890l", "brcm,bcm47094", "brcm,bcm4708";
+	model = "D-Link DIR-890L";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	leds {
+		/*
+		 * LED information is derived from the boot log which
+		 * conveniently lists all the LEDs.
+		 */
+		compatible = "gpio-leds";
+
+		led-power-white {
+			label = "bcm53xx:white:power";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wan-white {
+			label = "bcm53xx:white:wan";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+		};
+
+		led-power-amber {
+			label = "bcm53xx:amber:power";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wan-amber {
+			label = "bcm53xx:amber:wan";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb3-white {
+			label = "bcm53xx:white:usb3";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-usb2-white {
+			label = "bcm53xx:white:usb2";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-2ghz {
+			label = "bcm53xx:white:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5ghz {
+			label = "bcm53xx:white:5ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Called "factory reset" in the vendor dmesg */
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	/*
+	 * The flash memory is memory mapped at 0x1e000000-0x1fffffff
+	 * 64KB blocks; total size 2MB, same that can be
+	 * found attached to the spi_nor SPI controller.
+	 */
+	nvram@1e1f0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1e1f0000 0x00010000>;
+
+		et0macaddr: et0macaddr {
+		};
+	};
+};
+
+&gmac2 {
+	/*
+	 * The NVRAM curiously does not contain a MAC address
+	 * for et2 so since that is the only ethernet interface
+	 * actually in use on the platform, we use this et0 MAC
+	 * address for et2.
+	 */
+	nvmem-cells = <&et0macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&nandcs {
+	/* Spansion S34ML01G2, 128MB with 128KB erase blocks */
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/*
+		 * This is called "nflash" in the vendor kernel with
+		 * "upgrade" and "rootfs" (probably using OpenWrt
+		 * splitpart). We call it "firmware" like standard tools
+		 * assume. The CFE loader contains incorrect information
+		 * about TRX partitions, ignore this, there are no TRX
+		 * partitions: this device uses SEAMA.
+		 */
+		firmware@0 {
+			compatible = "seama";
+			label = "firmware";
+			reg = <0x00000000 0x08000000>;
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+	vcc-gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan1";
+		};
+
+		port@1 {
+			label = "lan2";
+		};
+
+		port@2 {
+			label = "lan3";
+		};
+
+		port@3 {
+			label = "lan4";
+		};
+
+		port@4 {
+			label = "wan";
+		};
+
+		port@5 {
+			status = "disabled";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			label = "cpu";
+			phy-mode = "rgmii";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/broadcom/bcm47094-linksys-panamera.dts
index 05d4f2931772..2b5c80d835e9 100644
--- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47094-linksys-panamera.dts
@@ -30,19 +30,19 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		rfkill {
+		button-rfkill {
 				label = "WiFi";
 				linux,code = <KEY_RFKILL>;
 				gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
 		};
 
-		reset {
+		button-reset {
 				label = "Reset";
 				linux,code = <KEY_RESTART>;
 				gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
@@ -52,19 +52,19 @@
 	leds {
 		compatible = "gpio-leds";
 
-		wps {
+		led-wps {
 			label = "bcm53xx:white:wps";
 			gpios = <&chipcommon 22 GPIO_ACTIVE_LOW>;
 		};
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:green:usb2";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
 			trigger-sources = <&ohci_port2>, <&ehci_port2>;
 			linux,default-trigger = "usbport";
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:green:usb3";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
@@ -72,64 +72,64 @@
 			linux,default-trigger = "usbport";
 		};
 
-		power {
+		led-power {
 			label = "bcm53xx:white:power";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		wifi-disabled {
+		led-wifi-disabled {
 			label = "bcm53xx:amber:wifi-disabled";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 		};
 
-		wifi-enabled {
+		led-wifi-enabled {
 			label = "bcm53xx:white:wifi-enabled";
 			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
 		};
 
-		bluebar1 {
+		led-bluebar1 {
 			label = "bcm53xx:white:bluebar1";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
 		};
 
-		bluebar2 {
+		led-bluebar2 {
 			label = "bcm53xx:white:bluebar2";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
 		};
 
-		bluebar3 {
+		led-bluebar3 {
 			label = "bcm53xx:white:bluebar3";
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
 		};
 
-		bluebar4 {
+		led-bluebar4 {
 			label = "bcm53xx:white:bluebar4";
 			gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
 		};
 
-		bluebar5 {
+		led-bluebar5 {
 			label = "bcm53xx:white:bluebar5";
 			gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
 		};
 
-		bluebar6 {
+		led-bluebar6 {
 			label = "bcm53xx:white:bluebar6";
 			gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
 		};
 
-		bluebar7 {
+		led-bluebar7 {
 			label = "bcm53xx:white:bluebar7";
 			gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>;
 		};
 
-		bluebar8 {
+		led-bluebar8 {
 			label = "bcm53xx:white:bluebar8";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
-	mdio-bus-mux@18003000 {
+	mdio-mux@18003000 {
 
 		/* BIT(9) = 1 => external mdio */
 		mdio@200 {
@@ -207,29 +207,32 @@
 	dsa,member = <0 0>;
 
 	ports {
+		sw0_p0: port@0 {
+			label = "extsw";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
 		port@1 {
-			reg = <1>;
 			label = "lan7";
 		};
 
 		port@2 {
-			reg = <2>;
 			label = "lan4";
 		};
 
 		port@3 {
-			reg = <3>;
 			label = "lan8";
 		};
 
 		port@4 {
-			reg = <4>;
 			label = "wan";
 		};
 
 		port@5 {
-			reg = <5>;
-			ethernet = <&gmac0>;
 			label = "cpu";
 			status = "disabled";
 
@@ -240,8 +243,6 @@
 		};
 
 		port@7 {
-			reg = <7>;
-			ethernet = <&gmac1>;
 			label = "cpu";
 			status = "disabled";
 
@@ -252,24 +253,7 @@
 		};
 
 		port@8 {
-			reg = <8>;
-			ethernet = <&gmac2>;
 			label = "cpu";
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-
-		sw0_p0: port@0 {
-			reg = <0>;
-			label = "extsw";
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
 		};
 	};
 };
@@ -295,7 +279,7 @@
 			reg = <0x080000 0x0100000>;
 		};
 
-		partition@180000{
+		partition@180000 {
 			label = "devinfo";
 			reg = <0x0180000 0x080000>;
 		};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts b/arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts
new file mode 100644
index 000000000000..e374062eb5b7
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2017 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "luxul,abr-4500-v1", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Luxul ABR-4500 V1";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+			#nvmem-cell-cells = <1>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		led-usb3 {
+			label = "bcm53xx:green:usb3";
+			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+				<&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "wan";
+			nvmem-cells = <&et0macaddr 1>;
+			nvmem-cell-names = "mac-address";
+		};
+
+		port@1 {
+			label = "lan4";
+		};
+
+		port@2 {
+			label = "lan3";
+		};
+
+		port@3 {
+			label = "lan2";
+		};
+
+		port@4 {
+			label = "lan1";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts
new file mode 100644
index 000000000000..badafa024d24
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+
+/ {
+	compatible = "luxul,xap-1610-v1", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Luxul XAP-1610 V1";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		led-2ghz {
+			label = "bcm53xx:blue:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5ghz {
+			label = "bcm53xx:blue:5ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+
+&pcie0 {
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	bridge@0,0 {
+		reg = <0x0000 0 0 0 0>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		wifi@0,0 {
+			compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
+			reg = <0x0000 0 0 0 0>;
+			brcm,ccode-map = "AU-AU-920", "CA-CA-892", "GB-DE-964", "NZ-AU-920", "US-US-825";
+		};
+	};
+};
+
+&pcie1 {
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	bridge@0,0 {
+		reg = <0x0000 0 0 0 0>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		wifi@0,0 {
+			compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
+			reg = <0x0000 0 0 0 0>;
+			brcm,ccode-map = "AU-AU-920", "CA-CA-892", "GB-DE-964", "NZ-AU-920", "US-US-825";
+		};
+	};
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "poe";
+		};
+
+		port@1 {
+			label = "lan";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts
new file mode 100644
index 000000000000..cf95af9db1e6
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2017 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "luxul,xbr-4500-v1", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Luxul XBR-4500 V1";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+			#nvmem-cell-cells = <1>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "timer";
+		};
+
+		led-usb3 {
+			label = "bcm53xx:green:usb3";
+			gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+				<&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "wan";
+			nvmem-cells = <&et0macaddr 1>;
+			nvmem-cell-names = "mac-address";
+		};
+
+		port@1 {
+			label = "lan4";
+		};
+
+		port@2 {
+			label = "lan3";
+		};
+
+		port@3 {
+			label = "lan2";
+		};
+
+		port@4 {
+			label = "lan1";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwc-2000.dts b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwc-2000.dts
new file mode 100644
index 000000000000..992c19e1cfa1
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwc-2000.dts
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2019 Legrand AV Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "luxul,xwc-2000-v1", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Luxul XWC-2000 V1";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3100.dts
index cbe8c8e4a301..4d0ba315a204 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3100.dts
@@ -9,7 +9,7 @@
 #include "bcm5301x-nand-cs0-bch4.dtsi"
 
 / {
-	compatible = "luxul,xwr-3100v1", "brcm,bcm47094", "brcm,bcm4708";
+	compatible = "luxul,xwr-3100-v1", "brcm,bcm47094", "brcm,bcm4708";
 	model = "Luxul XWR-3100 V1";
 
 	chosen {
@@ -25,43 +25,47 @@
 	nvram@1eff0000 {
 		compatible = "brcm,nvram";
 		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+			#nvmem-cell-cells = <1>;
+		};
 	};
 
 	leds {
 		compatible = "gpio-leds";
 
-		power	{
+		led-power {
 			label = "bcm53xx:green:power";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		lan3	{
+		led-lan3 {
 			label = "bcm53xx:green:lan3";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
 		};
 
-		lan4	{
+		led-lan4 {
 			label = "bcm53xx:green:lan4";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 		};
 
-		wan	{
+		led-wan {
 			label = "bcm53xx:green:wan";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		lan1	{
+		led-lan1 {
 			label = "bcm53xx:green:lan1";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
 		};
 
-		lan2	{
+		led-lan2 {
 			label = "bcm53xx:green:lan2";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
 		};
 
-		usb3	{
+		led-usb3 {
 			label = "bcm53xx:green:usb3";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
@@ -69,18 +73,18 @@
 			linux,default-trigger = "usbport";
 		};
 
-		status	{
+		led-status {
 			label = "bcm53xx:green:status";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "timer";
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:green:2ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:green:5ghz";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
@@ -89,7 +93,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
@@ -101,6 +105,11 @@
 	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
 };
 
+&gmac0 {
+	nvmem-cells = <&et0macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
 &spi_nor {
 	status = "okay";
 };
@@ -114,34 +123,37 @@
 
 	ports {
 		port@0 {
-			reg = <0>;
 			label = "lan4";
 		};
 
 		port@1 {
-			reg = <1>;
 			label = "lan3";
 		};
 
 		port@2 {
-			reg = <2>;
 			label = "lan2";
 		};
 
 		port@3 {
-			reg = <3>;
 			label = "lan1";
 		};
 
 		port@4 {
-			reg = <4>;
 			label = "wan";
+			nvmem-cells = <&et0macaddr 5>;
+			nvmem-cell-names = "mac-address";
 		};
 
 		port@5 {
-			reg = <5>;
 			label = "cpu";
-			ethernet = <&gmac0>;
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts
new file mode 100644
index 000000000000..83c429afc297
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "luxul,xwr-3150-v1", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Luxul XWR-3150 V1";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+			#nvmem-cell-cells = <1>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			label = "bcm53xx:green:power";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-usb3 {
+			label = "bcm53xx:green:usb3";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+					  <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		led-2ghz {
+			label = "bcm53xx:green:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5ghz {
+			label = "bcm53xx:green:5ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&pcie0 {
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	bridge@0,0 {
+		reg = <0x0000 0 0 0 0>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		wifi@0,0 {
+			compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
+			reg = <0x0000 0 0 0 0>;
+			brcm,ccode-map = "AU-AU-953", "CA-CA-946", "GB-E0-846", "NZ-AU-953", "US-Q2-930";
+		};
+	};
+};
+
+&pcie1 {
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	bridge@0,0 {
+		reg = <0x0000 0 0 0 0>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		wifi@0,0 {
+			compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
+			reg = <0x0000 0 0 0 0>;
+			brcm,ccode-map = "AU-AU-953", "CA-CA-946", "GB-E0-846", "NZ-AU-953", "US-Q2-930";
+		};
+	};
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan4";
+		};
+
+		port@1 {
+			label = "lan3";
+		};
+
+		port@2 {
+			label = "lan2";
+		};
+
+		port@3 {
+			label = "lan1";
+		};
+
+		port@4 {
+			label = "wan";
+			nvmem-cells = <&et0macaddr 5>;
+			nvmem-cell-names = "mac-address";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts b/arch/arm/boot/dts/broadcom/bcm47094-netgear-r8500.dts
index 42097a4c2659..76d562610654 100644
--- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47094-netgear-r8500.dts
@@ -25,38 +25,38 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power0 {
+		led-power0 {
 			label = "bcm53xx:white:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		power1 {
+		led-power1 {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		5ghz-1 {
+		led-5ghz-1 {
 			label = "bcm53xx:white:5ghz-1";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
 
-		5ghz-2 {
+		led-5ghz-2 {
 			label = "bcm53xx:white:5ghz-2";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:white:2ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 		};
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:white:usb2";
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:white:usb3";
 			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
 		};
@@ -65,25 +65,25 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		brightness {
+		button-brightness {
 			label = "Backlight";
 			linux,code = <KEY_BRIGHTNESS_ZERO>;
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm47094-phicomm-k3.dts b/arch/arm/boot/dts/broadcom/bcm47094-phicomm-k3.dts
index a2566ad4619c..bb1bc4e61bc2 100644
--- a/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47094-phicomm-k3.dts
@@ -22,7 +22,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
@@ -55,7 +55,7 @@
 			reg = <0x0080000 0x0100000>;
 		};
 
-		partition@180000{
+		partition@180000 {
 			label = "phicomm";
 			reg = <0x0180000 0x0280000>;
 			read-only;
diff --git a/arch/arm/boot/dts/bcm47094.dtsi b/arch/arm/boot/dts/broadcom/bcm47094.dtsi
index 6282363313e1..6282363313e1 100644
--- a/arch/arm/boot/dts/bcm47094.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm47094.dtsi
diff --git a/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts b/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts
new file mode 100644
index 000000000000..a39a021a3910
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm53573.dtsi"
+
+/ {
+	compatible = "luxul,xap-1440-v1", "brcm,bcm47189", "brcm,bcm53573";
+	model = "Luxul XAP-1440 V1";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-wlan {
+			label = "bcm53xx:blue:wlan";
+			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+		};
+
+		led-system {
+			label = "bcm53xx:green:system";
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gmac0 {
+	phy-mode = "rgmii";
+	phy-handle = <&bcm54210e>;
+
+	/delete-node/ fixed-link;
+
+	mdio {
+		/delete-node/ switch@1e;
+
+		bcm54210e: ethernet-phy@25 {
+			reg = <25>;
+		};
+	};
+};
+
+&gmac1 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts b/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-810.dts
index 2e1a7e382cb7..fd071da26cfa 100644
--- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-810.dts
@@ -20,36 +20,34 @@
 		reg = <0x00000000 0x08000000>;
 	};
 
-	leds {
+	leds-0 {
 		compatible = "gpio-leds";
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:blue:5ghz";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
-		system {
+		led-system {
 			label = "bcm53xx:green:system";
 			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "timer";
 		};
 	};
 
-	pcie0_leds {
+	leds-1 {
 		compatible = "gpio-leds";
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:blue:2ghz";
 			gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 	};
 
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
@@ -83,3 +81,22 @@
 		};
 	};
 };
+
+&gmac0 {
+	phy-mode = "rgmii";
+	phy-handle = <&bcm54210e>;
+
+	/delete-node/ fixed-link;
+
+	mdio {
+		/delete-node/ switch@1e;
+
+		bcm54210e: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&gmac1 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts b/arch/arm/boot/dts/broadcom/bcm47189-tenda-ac9.dts
index 049cdfd92706..3ac6cac541ca 100644
--- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47189-tenda-ac9.dts
@@ -20,37 +20,37 @@
 		reg = <0x00000000 0x08000000>;
 	};
 
-	leds {
+	leds-0 {
 		compatible = "gpio-leds";
 
-		usb {
+		led-usb {
 			label = "bcm53xx:blue:usb";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>;
 			linux,default-trigger = "usbport";
 		};
 
-		wps {
+		led-wps {
 			label = "bcm53xx:blue:wps";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:blue:5ghz";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
 		};
 
-		system {
+		led-system {
 			label = "bcm53xx:blue:system";
 			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "timer";
 		};
 	};
 
-	pcie0_leds {
+	leds-1 {
 		compatible = "gpio-leds";
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:blue:2ghz";
 			gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
 		};
@@ -59,19 +59,19 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
@@ -105,3 +105,33 @@
 		};
 	};
 };
+
+&switch {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "wan";
+		};
+
+		port@1 {
+			label = "lan1";
+		};
+
+		port@2 {
+			label = "lan2";
+		};
+
+		port@3 {
+			label = "lan3";
+		};
+
+		port@4 {
+			label = "lan4";
+		};
+
+		port@8 {
+			label = "cpu";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47622.dtsi b/arch/arm/boot/dts/broadcom/bcm47622.dtsi
new file mode 100644
index 000000000000..485863f9c420
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47622.dtsi
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm47622", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CA7_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x3>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CA7_0>, <&CA7_1>,
+			<&CA7_2>, <&CA7_3>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff800000 0x800000>;
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm47622-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts b/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts
new file mode 100644
index 000000000000..08abfdc63d18
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts
@@ -0,0 +1,187 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Meraki MR26 / Codename: Venom
+ *
+ * Copyright (C) 2022 Christian Lamparter <chunkeey@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "meraki,mr26", "brcm,bcm53015", "brcm,bcm4708";
+	model = "Meraki MR26";
+
+	memory@0 {
+		reg = <0x00000000 0x08000000>;
+		device_type = "memory";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_FAULT;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+			panic-indicator;
+		};
+		led-1 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		key-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&uart0 {
+	clock-frequency = <50000000>;
+	/delete-property/ clocks;
+};
+
+&uart1 {
+	status = "disabled";
+};
+
+&gmac0 {
+	status = "okay";
+
+	nvmem-cells = <&macaddr_board_config_66>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+	status = "disabled";
+};
+&gmac2 {
+	status = "disabled";
+};
+&gmac3 {
+	status = "disabled";
+};
+
+&nandcs {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x200000>;
+			read-only;
+		};
+
+		partition@200000 {
+			label = "u-boot-env";
+			reg = <0x200000 0x200000>;
+			/* empty */
+		};
+
+		partition@400000 {
+			label = "u-boot-backup";
+			reg = <0x400000 0x200000>;
+			/* empty */
+		};
+
+		partition@600000 {
+			label = "u-boot-env-backup";
+			reg = <0x600000 0x200000>;
+			/* empty */
+		};
+
+		partition@800000 {
+			compatible = "linux,ubi";
+			label = "ubi";
+			reg = <0x800000 0x7780000>;
+
+			volumes {
+				ubi-volume-board-config {
+					volname = "board-config";
+
+					nvmem-layout {
+						compatible = "fixed-layout";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						macaddr_board_config_66: macaddr@66 {
+							reg = <0x66 0x6>;
+						};
+					};
+				};
+			};
+		};
+	};
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "poe";
+		};
+
+		port@5 {
+			label = "cpu";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinmux_i2c>;
+
+	clock-frequency = <100000>;
+
+	ina219@40 {
+		compatible = "ti,ina219"; /* PoE power */
+		reg = <0x40>;
+		shunt-resistor = <60000>; /* = 60 mOhms */
+	};
+
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+		pagesize = <32>;
+		read-only;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* it's empty */
+	};
+};
+
+&thermal {
+	status = "disabled";
+	/* does not work, reads 418 degree Celsius */
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm53016-dlink-dwl-8610ap.dts b/arch/arm/boot/dts/broadcom/bcm53016-dlink-dwl-8610ap.dts
new file mode 100644
index 000000000000..c1f54391746f
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm53016-dlink-dwl-8610ap.dts
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "bcm4709.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "D-Link DWL-8610AP";
+	compatible = "dlink,dwl-8610ap", "brcm,bcm53016", "brcm,bcm4708";
+
+	memory@0 {
+		device_type = "memory";
+		/* 512 MB RAM in 2 x Macronix D9PSH chips */
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		led-diag {
+			/* Actually "diag" unclear what this means */
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-wlan-2g {
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wlan-5g {
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-reset {
+			debounce-interval = <100>;
+			wakeup-source;
+			linux,code = <KEY_RESTART>;
+			label = "reset";
+			/* This GPIO is actually stored in NVRAM, but it's not gonna change */
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	/*
+	 * Flash memory at 0x1e000000-0x1fffffff
+	 * Macronix 32 64KB blocks; total size 2MB, same that can be
+	 * found attached to the spi_nor SPI controller.
+	 */
+	nvram@1e080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1e080000 0x00020000>;
+
+		et0macaddr: et0macaddr {
+		};
+
+		et1macaddr: et1macaddr {
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+	nvmem-cells = <&et1macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	/* Serial SPI NOR Flash MX 25L1606E */
+	status = "okay";
+};
+
+&nandcs {
+	/*
+	 * Spansion S34ML01G100TFI00 128 MB NAND Flash memory
+	 *
+	 * This ECC is a bit unorthodox but it is what the stock firmware
+	 * is using, so to be able to mount the original partitions
+	 * this is necessary.
+	 */
+	nand-ecc-strength = <5>;
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* This is named nflash1.trx in CFE */
+		trx@0 {
+			label = "firmware";
+			reg = <0x00000000 0x02800000>;
+			compatible = "brcm,trx";
+		};
+
+		/* This is named nflash1.trx2 in CFE */
+		trx2@2800000 {
+			label = "firmware2";
+			reg = <0x02800000 0x02800000>;
+			compatible = "brcm,trx";
+		};
+
+		/* This is named nflash1.rwfs in CFE */
+		free@5000000 {
+			label = "free";
+			reg = <0x05000000 0x03000000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts b/arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts
new file mode 100644
index 000000000000..45bd27906f29
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts
@@ -0,0 +1,229 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Meraki MR32 / Codename: Espresso
+ *
+ * Copyright (C) 2018-2020 Christian Lamparter <chunkeey@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "meraki,mr32", "brcm,bcm53016", "brcm,bcm4708";
+	model = "Meraki MR32";
+
+	chosen {
+		bootargs = " console=ttyS0,115200n8 earlycon";
+	};
+
+	memory@0 {
+		reg = <0x00000000 0x08000000>;
+		device_type = "memory";
+	};
+
+	aliases {
+		serial1 = &uart2;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		sysled3 {
+			function = LED_FUNCTION_FAULT;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+			panic-indicator;
+		};
+		sysled2 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	pwm-leds {
+		compatible = "pwm-leds";
+
+		led-0 {
+			/* SYS-LED 1 - Tricolor */
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_RED>;
+			pwms = <&pwm 0 50000 0>;
+			max-brightness = <255>;
+		};
+
+		led-1 {
+			/* SYS-LED 1 - Tricolor */
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			pwms = <&pwm 1 50000 0>;
+			max-brightness = <255>;
+		};
+
+		led-2 {
+			/* SYS-LED 1 - Tricolor */
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_BLUE>;
+			pwms = <&pwm 2 50000 0>;
+			max-brightness = <255>;
+		};
+	};
+};
+
+&uart0 {
+	clock-frequency = <62500000>;
+	/delete-property/ clocks;
+};
+
+&uart1 {
+	status = "disabled";
+};
+
+&uart2 {
+	status = "okay";
+	/*
+	 * bluetooth-le {
+	 *	compatible = "brcm,bcm20732";
+	 *	enable-gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
+	 *};
+	 */
+};
+
+&gmac0 {
+	nvmem-cell-names = "mac-address";
+	nvmem-cells = <&mac_address>;
+};
+
+&gmac1 {
+	status = "disabled";
+};
+&gmac2 {
+	status = "disabled";
+};
+&gmac3 {
+	status = "disabled";
+};
+
+&pwm {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinmux_pwm>;
+};
+
+&nandcs {
+	partitions {
+		/*
+		 * The partition autodetection does not work for this device.
+		 * It will only detect the "nvram" partition with an incorrect size.
+		 *	[    1.721667] 1 bcm47xxpart partitions found on MTD device brcmnand.0
+		 *	[    1.727962] Creating 1 MTD partitions on "brcmnand.0":
+		 *	[    1.733117] 0x000000400000-0x000008000000 : "nvram"
+		 */
+
+		compatible = "fixed-partitions";
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x100000>;
+			read-only;
+		};
+
+		partition@100000 {
+			label = "bootkernel1";
+			reg = <0x100000 0x300000>;
+			read-only;
+		};
+
+		partition@400000 {
+			label = "nvram";
+			reg = <0x400000 0x100000>;
+			read-only;
+		};
+
+		partition@500000 {
+			label = "bootkernel2";
+			reg = <0x500000 0x300000>;
+			read-only;
+		};
+
+		partition@800000 {
+			label = "ubi";
+			reg = <0x800000 0x7780000>;
+		};
+	};
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "poe";
+		};
+
+		port@5 {
+			label = "cpu";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinmux_i2c>;
+
+	clock-frequency = <100000>;
+
+	current_sense: ina219@45 {
+		compatible = "ti,ina219";
+		reg = <0x45>;
+		shunt-resistor = <60000>; /* = 60 mOhms */
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		read-only;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			mac_address: mac-address@66 {
+				reg = <0x66 0x6>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi b/arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0-bch1.dtsi
index c349e8f0afc5..c349e8f0afc5 100644
--- a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0-bch1.dtsi
diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi b/arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0-bch4.dtsi
index 18e25e302b13..18e25e302b13 100644
--- a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0-bch4.dtsi
diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi b/arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0-bch8.dtsi
index c8e56d30bd6f..c8e56d30bd6f 100644
--- a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0-bch8.dtsi
diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi b/arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0.dtsi
index be9a00ff752d..be9a00ff752d 100644
--- a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0.dtsi
diff --git a/arch/arm/boot/dts/broadcom/bcm5301x.dtsi b/arch/arm/boot/dts/broadcom/bcm5301x.dtsi
new file mode 100644
index 000000000000..f06a178a9240
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm5301x.dtsi
@@ -0,0 +1,136 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * Generic DTS part for all BCM53010, BCM53011, BCM53012, BCM53014, BCM53015,
+ * BCM53016, BCM53017, BCM53018, BCM4707, BCM4708 and BCM4709 SoCs
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcm-ns.dtsi"
+
+/ {
+	mpcore-bus@19000000 {
+		a9pll: arm_clk@0 {
+			#clock-cells = <0>;
+			compatible = "brcm,nsp-armpll";
+			clocks = <&osc>;
+			reg = <0x00000 0x1000>;
+		};
+
+		watchdog@20620 {
+			compatible = "arm,cortex-a9-twd-wdt";
+			reg = <0x20620 0x20>;
+			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_EDGE_RISING)>;
+			clocks = <&periph_clk>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc: oscillator {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25000000>;
+		};
+
+		iprocmed: iprocmed {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		iprocslow: iprocslow {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		periph_clk: periph_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&a9pll>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+	};
+
+	i2c0: i2c@18009000 {
+		compatible = "brcm,iproc-i2c";
+		reg = <0x18009000 0x50>;
+		interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <100000>;
+		status = "disabled";
+	};
+
+	dmu-bus@1800c000 {
+		cru-bus@100 {
+			lcpll0: clock-controller@100 {
+				#clock-cells = <1>;
+				compatible = "brcm,nsp-lcpll0";
+				reg = <0x100 0x14>;
+				clocks = <&osc>;
+				clock-output-names = "lcpll0", "pcie_phy",
+						     "sdio", "ddr_phy";
+			};
+
+			genpll: clock-controller@140 {
+				#clock-cells = <1>;
+				compatible = "brcm,nsp-genpll";
+				reg = <0x140 0x24>;
+				clocks = <&osc>;
+				clock-output-names = "genpll", "phy",
+						     "ethernetclk",
+						     "usbclk", "iprocfast",
+						     "sata1", "sata2";
+			};
+		};
+	};
+
+	spi@18029200 {
+		compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
+		reg = <0x18029200 0x184>,
+		      <0x18029000 0x124>,
+		      <0x1811b408 0x004>,
+		      <0x180293a0 0x01c>;
+		reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "mspi_done",
+				  "mspi_halted",
+				  "spi_lr_fullness_reached",
+				  "spi_lr_session_aborted",
+				  "spi_lr_impatient",
+				  "spi_lr_session_done",
+				  "spi_lr_overread";
+		clocks = <&iprocmed>;
+		num-cs = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		spi_nor: flash@0 {
+			compatible = "jedec,spi-nor";
+			reg = <0>;
+			spi-max-frequency = <20000000>;
+			status = "disabled";
+
+			partitions {
+				compatible = "brcm,bcm947xx-cfe-partitions";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts b/arch/arm/boot/dts/broadcom/bcm53340-ubnt-unifi-switch8.dts
index 2e7fda9b998c..08cf1220b655 100644
--- a/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts
+++ b/arch/arm/boot/dts/broadcom/bcm53340-ubnt-unifi-switch8.dts
@@ -32,9 +32,8 @@
 
 &qspi {
 	status = "okay";
-	bspi-sel = <0>;
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "m25p80";
 		reg = <0>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm53573.dtsi b/arch/arm/boot/dts/broadcom/bcm53573.dtsi
index 51546fccc616..2df80740d181 100644
--- a/arch/arm/boot/dts/bcm53573.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm53573.dtsi
@@ -127,6 +127,9 @@
 
 		pcie0: pcie@2000 {
 			reg = <0x00002000 0x1000>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
 		};
 
 		usb2: usb2@4000 {
@@ -156,8 +159,6 @@
 			};
 
 			ohci: usb@d000 {
-				#usb-cells = <0>;
-
 				compatible = "generic-ohci";
 				reg = <0xd000 0x1000>;
 				interrupt-parent = <&gic>;
@@ -180,10 +181,74 @@
 
 		gmac0: ethernet@5000 {
 			reg = <0x5000 0x1000>;
+			phy-mode = "internal";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				switch: switch@1e {
+					compatible = "brcm,bcm53125";
+					reg = <0x1e>;
+
+					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+						};
+
+						port@1 {
+							reg = <1>;
+						};
+
+						port@2 {
+							reg = <2>;
+						};
+
+						port@3 {
+							reg = <3>;
+						};
+
+						port@4 {
+							reg = <4>;
+						};
+
+						port@5 {
+							reg = <5>;
+							ethernet = <&gmac1>;
+
+							fixed-link {
+								speed = <1000>;
+								full-duplex;
+							};
+						};
+
+						port@8 {
+							reg = <8>;
+							ethernet = <&gmac0>;
+						};
+					};
+				};
+			};
 		};
 
 		gmac1: ethernet@b000 {
 			reg = <0xb000 0x1000>;
+			phy-mode = "internal";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
 		};
 
 		pmu@12000 {
diff --git a/arch/arm/boot/dts/broadcom/bcm63138.dtsi b/arch/arm/boot/dts/broadcom/bcm63138.dtsi
new file mode 100644
index 000000000000..4ec568586b14
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm63138.dtsi
@@ -0,0 +1,335 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Broadcom BCM63138 DSL SoCs Device Tree
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm63138", "brcm,bcmbca";
+	model = "Broadcom BCM963138 Reference Board";
+	interrupt-parent = <&gic>;
+
+	aliases {
+		uart0 = &serial0;
+		uart1 = &serial1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0>;
+			enable-method = "brcm,bcm63138";
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <1>;
+			enable-method = "brcm,bcm63138";
+			resets = <&pmb0 4 1>;
+		};
+	};
+
+	clocks {
+		/* UBUS peripheral clock */
+		periph_clk: periph_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+			clock-output-names = "periph";
+		};
+
+		/* peripheral clock for system timer */
+		axi_clk: axi_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&armpll>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		/* APB bus clock */
+		apb_clk: apb_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&armpll>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
+	};
+
+	/* ARM bus */
+	axi@80000000 {
+		compatible = "simple-bus";
+		ranges = <0 0x80000000 0x784000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		L2: cache-controller@1d000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x1d000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+			cache-size = <524288>;
+			cache-sets = <1024>;
+			cache-line-size = <32>;
+			interrupts = <GIC_PPI 0 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		scu: scu@1e000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0x1e000 0x100>;
+		};
+
+		gic: interrupt-controller@1f000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0x1f000 0x1000
+				0x1e100 0x100>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+		};
+
+		global_timer: timer@1e200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x1e200 0x20>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&axi_clk>;
+		};
+
+		local_timer: local-timer@1e600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x1e600 0x20>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_EDGE_RISING)>;
+			clocks = <&axi_clk>;
+		};
+
+		twd_watchdog: watchdog@1e620 {
+			compatible = "arm,cortex-a9-twd-wdt";
+			reg = <0x1e620 0x20>;
+			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		armpll: armpll@20000 {
+			#clock-cells = <0>;
+			compatible = "brcm,bcm63138-armpll";
+			clocks = <&periph_clk>;
+			reg = <0x20000 0xf00>;
+		};
+
+		pmb0: reset-controller@4800c0 {
+			compatible = "brcm,bcm63138-pmb";
+			reg = <0x4800c0 0x10>;
+			#reset-cells = <2>;
+		};
+
+		pmb1: reset-controller@4800e0 {
+			compatible = "brcm,bcm63138-pmb";
+			reg = <0x4800e0 0x10>;
+			#reset-cells = <2>;
+		};
+
+		ahci: sata@a000 {
+			compatible = "brcm,bcm63138-ahci", "brcm,sata3-ahci";
+			reg-names = "ahci", "top-ctrl";
+			reg = <0xa000 0x9ac>, <0x8040 0x24>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			resets = <&pmb0 3 1>;
+			reset-names = "ahci";
+			status = "disabled";
+
+			sata0: sata-port@0 {
+				reg = <0>;
+				phys = <&sata_phy0>;
+			};
+		};
+
+		sata_phy: sata-phy@8100 {
+			compatible = "brcm,bcm63138-sata-phy", "brcm,phy-sata3";
+			reg = <0x8100 0x1e00>;
+			reg-names = "phy";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata_phy0: sata-phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+			};
+		};
+	};
+
+	/* Legacy UBUS base */
+	ubus@fffe8000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xfffe8000 0x10000>;
+
+		timer: timer@80 {
+			compatible = "brcm,bcm6328-timer", "syscon";
+			reg = <0x80 0x3c>;
+		};
+
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@100 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x100 0x04>, <0x114 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@104 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x104 0x04>, <0x118 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@108 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x108 0x04>, <0x11c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@10c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x10c 0x04>, <0x120 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@110 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x110 0x04>, <0x124 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		rng@300 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0x300 0x28>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		serial0: serial@600 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x600 0x1b>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+			clock-names = "periph";
+			status = "disabled";
+		};
+
+		serial1: serial@620 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x620 0x1b>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+			clock-names = "periph";
+			status = "disabled";
+		};
+
+		leds: led-controller@700 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-leds";
+			reg = <0x700 0xdc>;
+			status = "disabled";
+		};
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@2000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.0", "brcm,brcmnand";
+			reg = <0x2000 0x600>, <0xf0 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "nand_ctlrdy";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
+		serial@4400 {
+			compatible = "brcm,bcm63138-hs-uart", "brcm,bcmbca-hs-uart";
+			reg = <0x4400 0x1e0>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		bootlut: bootlut@8000 {
+			compatible = "brcm,bcm63138-bootlut";
+			reg = <0x8000 0x50>;
+		};
+
+		pl081_dma: dma-controller@d000 {
+			compatible = "arm,pl081", "arm,primecell";
+			// The magic B105F00D info is missing
+			arm,primecell-periphid = <0x00041081>;
+			reg = <0xd000 0x1000>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			clocks = <&periph_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <2>;
+		};
+
+		reboot {
+			compatible = "syscon-reboot";
+			regmap = <&timer>;
+			offset = <0x34>;
+			mask = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm63148.dtsi b/arch/arm/boot/dts/broadcom/bcm63148.dtsi
new file mode 100644
index 000000000000..e071cddb28fc
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm63148.dtsi
@@ -0,0 +1,201 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm63148", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		B15_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "brcm,brahma-b15";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B15_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "brcm,brahma-b15";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&B15_0>, <&B15_1>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@80030000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x80030000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a15-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
+					IRQ_TYPE_LEVEL_HIGH)>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xfffe8000 0x8000>;
+
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@100 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x100 0x04>, <0x114 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@104 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x104 0x04>, <0x118 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@108 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x108 0x04>, <0x11c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@10c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x10c 0x04>, <0x120 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@110 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x110 0x04>, <0x124 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		rng@300 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0x300 0x28>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		uart0: serial@600 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x600 0x20>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+			clock-names = "refclk";
+			status = "disabled";
+		};
+
+		leds: led-controller@700 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-leds";
+			reg = <0x700 0xdc>;
+			status = "disabled";
+		};
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63148-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@2000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x2000 0x600>, <0xf0 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm63178.dtsi b/arch/arm/boot/dts/broadcom/bcm63178.dtsi
new file mode 100644
index 000000000000..430750b3030f
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm63178.dtsi
@@ -0,0 +1,267 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm63178", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CA7_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CA7_0>, <&CA7_1>,
+			<&CA7_2>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_HIGH)>;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff800000 0x800000>;
+
+		watchdog@480 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x480 0x10>;
+		};
+
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@500 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x500 0x04>, <0x520 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@504 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x504 0x04>, <0x524 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@508 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x508 0x04>, <0x528 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@50c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x50c 0x04>, <0x52c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@510 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x510 0x04>, <0x530 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 160 .. 191 */
+		gpio5: gpio@514 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x514 0x04>, <0x534 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 192 .. 223 */
+		gpio6: gpio@518 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x518 0x04>, <0x538 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 224 .. 255 */
+		gpio7: gpio@51c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x51c 0x04>, <0x53c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		rng@b80 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0xb80 0x28>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63178-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
+		leds: led-controller@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-leds";
+			reg = <0x3000 0xdc>;
+			status = "disabled";
+		};
+
+		pl081_dma: dma-controller@11000 {
+			compatible = "arm,pl081", "arm,primecell";
+			// The magic B105F00D info is missing
+			arm,primecell-periphid = <0x00041081>;
+			reg = <0x11000 0x1000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			clocks = <&periph_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <2>;
+		};
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm6756.dtsi b/arch/arm/boot/dts/broadcom/bcm6756.dtsi
new file mode 100644
index 000000000000..6433f8fa5eff
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm6756.dtsi
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm6756", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CA7_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x3>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CA7_0>, <&CA7_1>,
+			<&CA7_2>, <&CA7_3>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff800000 0x800000>;
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6756-hsspi", "brcm,bcmbca-hsspi-v1.1";
+			reg = <0x1000 0x600>, <0x2610 0x4>;
+			reg-names = "hsspi", "spim-ctrl";
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm6846-genexis-xg6846b.dts b/arch/arm/boot/dts/broadcom/bcm6846-genexis-xg6846b.dts
new file mode 100644
index 000000000000..a3616fb7b3a8
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm6846-genexis-xg6846b.dts
@@ -0,0 +1,244 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 Linus Walleij <linus.walleij@linaro.org>
+ */
+
+/dts-v1/;
+
+#include "bcm6846.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Genexis XG6846B Ethernet layer 2/3 router";
+	compatible = "genexis,xg6846b", "brcm,bcm6846", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	/* Micron D9PTK 256 MB RAM */
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x10000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		secondary-boot@0 {
+			no-map;
+			reg = <0x00000000 0x00008000>;
+		};
+		pmc3-firmware@8000 {
+			no-map;
+			reg = <0x00008000 0x00100000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <20000>;
+
+		/* Called "canyon rescue button" in the vendor DTB */
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 41 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+	/* Totally 79 GPIOs are available */
+	ngpios = <15>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&leds {
+	status = "okay";
+	brcm,serial-shift-bits = <16>;
+
+	led@0 {
+		reg = <0>;
+		active-low;
+		function = "ext";
+		color = <LED_COLOR_ID_GREEN>;
+	};
+
+	led@1 {
+		reg = <1>;
+		active-low;
+		function = "ext";
+		color = <LED_COLOR_ID_AMBER>;
+	};
+
+	led@3 {
+		reg = <3>;
+		active-low;
+		function = LED_FUNCTION_WAN;
+		color = <LED_COLOR_ID_AMBER>;
+	};
+
+	led@4 {
+		reg = <4>;
+		active-low;
+		function = LED_FUNCTION_WAN;
+		color = <LED_COLOR_ID_GREEN>;
+	};
+
+	led@5 {
+		reg = <5>;
+		active-low;
+		function = LED_FUNCTION_POWER;
+		color = <LED_COLOR_ID_GREEN>;
+	};
+
+	led@6 {
+		reg = <6>;
+		active-low;
+		function = LED_FUNCTION_POWER;
+		color = <LED_COLOR_ID_RED>;
+	};
+
+	led@15 {
+		reg = <15>;
+		active-low;
+		function = LED_FUNCTION_USB;
+		color = <LED_COLOR_ID_GREEN>;
+	};
+
+	led@7 {
+		/* Activity 03 */
+		reg = <7>;
+		active-low;
+		function = "lan1";
+		color = <LED_COLOR_ID_AMBER>;
+	};
+
+	led@8 {
+		/* Activity 04 */
+		reg = <8>;
+		active-low;
+		function = "lan1";
+		color = <LED_COLOR_ID_GREEN>;
+	};
+
+	led@9 {
+		/* Activity 03 */
+		reg = <9>;
+		active-low;
+		function = "lan2";
+		color = <LED_COLOR_ID_AMBER>;
+	};
+
+	led@10 {
+		/* Activity 04 */
+		reg = <10>;
+		active-low;
+		function = "lan2";
+		color = <LED_COLOR_ID_GREEN>;
+	};
+
+	led@11 {
+		/* Activity 03 */
+		reg = <11>;
+		active-low;
+		function = "lan3";
+		color = <LED_COLOR_ID_AMBER>;
+	};
+
+	led@12 {
+		/* Activity 04 */
+		reg = <12>;
+		active-low;
+		function = "lan3";
+		color = <LED_COLOR_ID_GREEN>;
+	};
+
+	led@13 {
+		/* Activity 03 */
+		reg = <13>;
+		active-low;
+		function = "lan4";
+		color = <LED_COLOR_ID_AMBER>;
+	};
+
+	led@14 {
+		/* Activity 04 */
+		reg = <14>;
+		active-low;
+		function = "lan4";
+		color = <LED_COLOR_ID_GREEN>;
+	};
+};
+
+&hsspi {
+	status = "okay";
+};
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+
+	/* Winbond W29N02GV, 256MB with 128KB erase blocks */
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		loader@0 {
+			label = "loader";
+			reg = <0x00000000 0x00400000>;
+		};
+		image@400000 {
+			label = "image";
+			reg = <0x00400000 0x0fb00000>;
+		};
+		/* 0x00ff0000-0x00ffffff: bad block list */
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+	phy2: ethernet-phy@2 {
+		reg = <2>;
+	};
+	phy3: ethernet-phy@3 {
+		reg = <3>;
+	};
+	phy4: ethernet-phy@4 {
+		reg = <4>;
+	};
+	phy21: ethernet-phy@21 {
+		reg = <21>;
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm6846.dtsi b/arch/arm/boot/dts/broadcom/bcm6846.dtsi
new file mode 100644
index 000000000000..f5591a45d2e4
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm6846.dtsi
@@ -0,0 +1,258 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm6846", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CA7_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CA7_0>, <&CA7_1>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff800000 0x800000>;
+
+		watchdog@480 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x480 0x10>;
+		};
+
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@500 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x500 0x04>, <0x520 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@504 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x504 0x04>, <0x524 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@508 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x508 0x04>, <0x528 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@50c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x50c 0x04>, <0x52c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@510 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x510 0x04>, <0x530 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 160 .. 191 */
+		gpio5: gpio@514 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x514 0x04>, <0x534 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 192 .. 223 */
+		gpio6: gpio@518 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x518 0x04>, <0x538 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 224 .. 255 */
+		gpio7: gpio@51c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x51c 0x04>, <0x53c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		uart0: serial@640 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x640 0x1b>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+			clock-names = "refclk";
+			status = "disabled";
+		};
+
+		rng@b80 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0xb80 0x28>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		leds: led-controller@800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-leds";
+			reg = <0x800 0xdc>;
+			status = "disabled";
+		};
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6846-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
+		mdio: mdio@2060 {
+			compatible = "brcm,bcm6846-mdio";
+			reg = <0x02060 0x10>, <0x5a068 0x4>;
+			reg-names = "mdio", "mdio_indir_rw";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pl081_dma: dma-controller@59000 {
+			compatible = "arm,pl081", "arm,primecell";
+			// The magic B105F00D info is missing
+			arm,primecell-periphid = <0x00041081>;
+			reg = <0x59000 0x1000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			clocks = <&periph_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm6855.dtsi b/arch/arm/boot/dts/broadcom/bcm6855.dtsi
new file mode 100644
index 000000000000..a88c3f0fbcb0
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm6855.dtsi
@@ -0,0 +1,282 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm6855", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CA7_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CA7_0>, <&CA7_1>, <&CA7_2>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_HIGH)>;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff800000 0x800000>;
+
+		watchdog@480 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x480 0x10>;
+		};
+
+		watchdog@4c0 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x4c0 0x10>;
+			status = "disabled";
+		};
+
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@500 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x500 0x04>, <0x520 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@504 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x504 0x04>, <0x524 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@508 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x508 0x04>, <0x528 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@50c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x50c 0x04>, <0x52c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@510 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x510 0x04>, <0x530 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 160 .. 191 */
+		gpio5: gpio@514 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x514 0x04>, <0x534 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 192 .. 223 */
+		gpio6: gpio@518 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x518 0x04>, <0x538 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 224 .. 255 */
+		gpio7: gpio@51c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x51c 0x04>, <0x53c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		rng@b80 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0xb80 0x28>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6855-hsspi", "brcm,bcmbca-hsspi-v1.1";
+			reg = <0x1000 0x600>, <0x2610 0x4>;
+			reg-names = "hsspi", "spim-ctrl";
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
+		leds: led-controller@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-leds";
+			reg = <0x3000 0xdc>;
+			status = "disabled";
+		};
+
+		pl081_dma: dma-controller@11000 {
+			compatible = "arm,pl081", "arm,primecell";
+			// The magic B105F00D info is missing
+			arm,primecell-periphid = <0x00041081>;
+			reg = <0x11000 0x1000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			clocks = <&periph_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <2>;
+		};
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart1: serial@13000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x13000 0x1000>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm6878.dtsi b/arch/arm/boot/dts/broadcom/bcm6878.dtsi
new file mode 100644
index 000000000000..dd837bf69390
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm6878.dtsi
@@ -0,0 +1,264 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm6878", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CA7_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CA7_0>, <&CA7_1>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
+					IRQ_TYPE_LEVEL_HIGH)>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff800000 0x800000>;
+
+		watchdog@480 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x480 0x10>;
+		};
+
+		watchdog@4c0 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x4c0 0x10>;
+			status = "disabled";
+		};
+
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@500 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x500 0x04>, <0x520 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@504 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x504 0x04>, <0x524 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@508 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x508 0x04>, <0x528 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@50c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x50c 0x04>, <0x52c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@510 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x510 0x04>, <0x530 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 160 .. 191 */
+		gpio5: gpio@514 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x514 0x04>, <0x534 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 192 .. 223 */
+		gpio6: gpio@518 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x518 0x04>, <0x538 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 224 .. 255 */
+		gpio7: gpio@51c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x51c 0x04>, <0x53c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		rng@b80 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0xb80 0x28>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		leds: led-controller@700 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-leds";
+			reg = <0x700 0xdc>;
+			status = "disabled";
+		};
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6878-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
+		pl081_dma: dma-controller@11000 {
+			compatible = "arm,pl081", "arm,primecell";
+			// The magic B105F00D info is missing
+			arm,primecell-periphid = <0x00041081>;
+			reg = <0x11000 0x1000>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			clocks = <&periph_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <2>;
+		};
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts b/arch/arm/boot/dts/broadcom/bcm7445-bcm97445svmb.dts
index f92d2cf85972..f92d2cf85972 100644
--- a/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
+++ b/arch/arm/boot/dts/broadcom/bcm7445-bcm97445svmb.dts
diff --git a/arch/arm/boot/dts/bcm7445.dtsi b/arch/arm/boot/dts/broadcom/bcm7445.dtsi
index 5ac2042515b8..c6307c7437e3 100644
--- a/arch/arm/boot/dts/bcm7445.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm7445.dtsi
@@ -237,7 +237,8 @@
 			ranges = <0x0 0x0 0x80000>;
 
 			memc-ddr@2000 {
-				compatible = "brcm,brcmstb-memc-ddr";
+				compatible = "brcm,brcmstb-memc-ddr-rev-b.1.x",
+					     "brcm,brcmstb-memc-ddr";
 				reg = <0x2000 0x800>;
 			};
 
@@ -259,7 +260,8 @@
 			ranges = <0x0 0x80000 0x80000>;
 
 			memc-ddr@2000 {
-				compatible = "brcm,brcmstb-memc-ddr";
+				compatible = "brcm,brcmstb-memc-ddr-rev-b.1.x",
+					     "brcm,brcmstb-memc-ddr";
 				reg = <0x2000 0x800>;
 			};
 
@@ -281,7 +283,8 @@
 			ranges = <0x0 0x100000 0x80000>;
 
 			memc-ddr@2000 {
-				compatible = "brcm,brcmstb-memc-ddr";
+				compatible = "brcm,brcmstb-memc-ddr-rev-b.1.x",
+					     "brcm,brcmstb-memc-ddr";
 				reg = <0x2000 0x800>;
 			};
 
diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/broadcom/bcm911360_entphn.dts
index a76c74b44bba..363009e747b3 100644
--- a/arch/arm/boot/dts/bcm911360_entphn.dts
+++ b/arch/arm/boot/dts/broadcom/bcm911360_entphn.dts
@@ -47,10 +47,10 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		hook {
+		button-hook {
 			label = "HOOK";
 			linux,code = <KEY_O>;
 			gpios = <&gpio_asiu 48 0>;
diff --git a/arch/arm/boot/dts/bcm911360k.dts b/arch/arm/boot/dts/broadcom/bcm911360k.dts
index 091c73a46e08..091c73a46e08 100644
--- a/arch/arm/boot/dts/bcm911360k.dts
+++ b/arch/arm/boot/dts/broadcom/bcm911360k.dts
diff --git a/arch/arm/boot/dts/bcm94708.dts b/arch/arm/boot/dts/broadcom/bcm94708.dts
index 3d13e46c6949..d9eb2040b963 100644
--- a/arch/arm/boot/dts/bcm94708.dts
+++ b/arch/arm/boot/dts/broadcom/bcm94708.dts
@@ -38,7 +38,7 @@
 	model = "NorthStar SVK (BCM94708)";
 	compatible = "brcm,bcm94708", "brcm,bcm4708";
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>;
 	};
diff --git a/arch/arm/boot/dts/bcm94709.dts b/arch/arm/boot/dts/broadcom/bcm94709.dts
index 5017b7b259cb..618c812eef73 100644
--- a/arch/arm/boot/dts/bcm94709.dts
+++ b/arch/arm/boot/dts/broadcom/bcm94709.dts
@@ -38,7 +38,7 @@
 	model = "NorthStar SVK (BCM94709)";
 	compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708";
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>;
 	};
diff --git a/arch/arm/boot/dts/bcm947189acdbmr.dts b/arch/arm/boot/dts/broadcom/bcm947189acdbmr.dts
index b0b8c774a37f..0b8727ae6f16 100644
--- a/arch/arm/boot/dts/bcm947189acdbmr.dts
+++ b/arch/arm/boot/dts/broadcom/bcm947189acdbmr.dts
@@ -25,17 +25,17 @@
 	leds {
 		compatible = "gpio-leds";
 
-		wps {
+		led-wps {
 			label = "bcm53xx:blue:wps";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:blue:5ghz";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:blue:2ghz";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
 		};
@@ -44,13 +44,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
 		};
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
@@ -60,9 +60,9 @@
 	spi {
 		compatible = "spi-gpio";
 		num-chipselects = <1>;
-		gpio-sck = <&chipcommon 21 0>;
-		gpio-miso = <&chipcommon 22 0>;
-		gpio-mosi = <&chipcommon 23 0>;
+		sck-gpios = <&chipcommon 21 0>;
+		miso-gpios = <&chipcommon 22 0>;
+		mosi-gpios = <&chipcommon 23 0>;
 		cs-gpios = <&chipcommon 24 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/boot/dts/broadcom/bcm947622.dts b/arch/arm/boot/dts/broadcom/bcm947622.dts
new file mode 100644
index 000000000000..6241485408d3
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm947622.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm47622.dtsi"
+
+/ {
+	model = "Broadcom BCM947622 Reference Board";
+	compatible = "brcm,bcm947622", "brcm,bcm47622", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm/boot/dts/bcm953012er.dts b/arch/arm/boot/dts/broadcom/bcm953012er.dts
index 52feca0fb906..d939ec9f4a9e 100644
--- a/arch/arm/boot/dts/bcm953012er.dts
+++ b/arch/arm/boot/dts/broadcom/bcm953012er.dts
@@ -37,7 +37,7 @@
 
 / {
 	model = "NorthStar Enterprise Router (BCM953012ER)";
-	compatible = "brcm,bcm953012er", "brcm,brcm53012", "brcm,bcm4708";
+	compatible = "brcm,bcm953012er", "brcm,bcm53012", "brcm,bcm4708";
 
 	memory@0 {
 		device_type = "memory";
@@ -47,13 +47,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
@@ -84,6 +84,14 @@
 			label = "cpu";
 			ethernet = <&gmac0>;
 		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/bcm953012hr.dts b/arch/arm/boot/dts/broadcom/bcm953012hr.dts
index 9140be7ec053..b728cd54715e 100644
--- a/arch/arm/boot/dts/bcm953012hr.dts
+++ b/arch/arm/boot/dts/broadcom/bcm953012hr.dts
@@ -37,7 +37,7 @@
 
 / {
 	model = "NorthStar HR (BCM953012HR)";
-	compatible = "brcm,bcm953012hr", "brcm,brcm53012", "brcm,bcm4708";
+	compatible = "brcm,bcm953012hr", "brcm,bcm53012", "brcm,bcm4708";
 
 	aliases {
 		ethernet0 = &gmac0;
@@ -74,7 +74,6 @@
 &spi_nor {
 	status = "okay";
 	spi-max-frequency = <62500000>;
-	m25p,default-addr-width = <3>;
 
 	#address-cells = <1>;
 	#size-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/broadcom/bcm953012k.dts
index de40bd59a5fa..27c0992f1855 100644
--- a/arch/arm/boot/dts/bcm953012k.dts
+++ b/arch/arm/boot/dts/broadcom/bcm953012k.dts
@@ -36,7 +36,7 @@
 
 / {
 	model = "NorthStar SVK (BCM953012K)";
-	compatible = "brcm,bcm953012k", "brcm,brcm53012", "brcm,bcm4708";
+	compatible = "brcm,bcm953012k", "brcm,bcm53012", "brcm,bcm4708";
 
 	aliases {
 		serial0 = &uart0;
@@ -84,7 +84,6 @@
 &spi_nor {
 	status = "okay";
 	spi-max-frequency = <62500000>;
-	m25p,default-addr-width = <3>;
 
 	#address-cells = <1>;
 	#size-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm958300k.dts b/arch/arm/boot/dts/broadcom/bcm958300k.dts
index dda3e11b711f..dda3e11b711f 100644
--- a/arch/arm/boot/dts/bcm958300k.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958300k.dts
diff --git a/arch/arm/boot/dts/bcm958305k.dts b/arch/arm/boot/dts/broadcom/bcm958305k.dts
index ea3c6b88b313..ea3c6b88b313 100644
--- a/arch/arm/boot/dts/bcm958305k.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958305k.dts
diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/broadcom/bcm958522er.dts
index 1f73885ec274..2f20f86bd31c 100644
--- a/arch/arm/boot/dts/bcm958522er.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958522er.dts
@@ -37,7 +37,7 @@
 
 / {
 	model = "NorthStar Plus SVK (BCM958522ER)";
-	compatible = "brcm,bcm58522", "brcm,nsp";
+	compatible = "brcm,bcm958522er", "brcm,bcm58522", "brcm,nsp";
 
 	chosen {
 		stdout-path = "serial0:115200n8";
@@ -134,8 +134,8 @@
 };
 
 &qspi {
-	bspi-sel = <0>;
-	flash: m25p80@0 {
+	status = "okay";
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p80";
diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/broadcom/bcm958525er.dts
index b6b9ca8b0972..980c03f74a19 100644
--- a/arch/arm/boot/dts/bcm958525er.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958525er.dts
@@ -37,7 +37,7 @@
 
 / {
 	model = "NorthStar Plus SVK (BCM958525ER)";
-	compatible = "brcm,bcm58525", "brcm,nsp";
+	compatible = "brcm,bcm958525er", "brcm,bcm58525", "brcm,nsp";
 
 	chosen {
 		stdout-path = "serial0:115200n8";
@@ -134,8 +134,8 @@
 };
 
 &qspi {
-	bspi-sel = <0>;
-	flash: m25p80@0 {
+	status = "okay";
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p80";
diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/broadcom/bcm958525xmc.dts
index ecf426f6ad5d..440bb2d617f2 100644
--- a/arch/arm/boot/dts/bcm958525xmc.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958525xmc.dts
@@ -37,7 +37,7 @@
 
 / {
 	model = "NorthStar Plus XMC (BCM958525xmc)";
-	compatible = "brcm,bcm58525", "brcm,nsp";
+	compatible = "brcm,bcm958525xmc", "brcm,bcm58525", "brcm,nsp";
 
 	chosen {
 		stdout-path = "serial0:115200n8";
@@ -150,8 +150,8 @@
 };
 
 &qspi {
-	bspi-sel = <0>;
-	flash: m25p80@0 {
+	status = "okay";
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p80";
diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/broadcom/bcm958622hr.dts
index 8ca18da981ad..116f3a7c3bc6 100644
--- a/arch/arm/boot/dts/bcm958622hr.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958622hr.dts
@@ -37,7 +37,7 @@
 
 / {
 	model = "NorthStar Plus SVK (BCM958622HR)";
-	compatible = "brcm,bcm58622", "brcm,nsp";
+	compatible = "brcm,bcm958622hr", "brcm,bcm58622", "brcm,nsp";
 
 	chosen {
 		stdout-path = "serial0:115200n8";
@@ -138,8 +138,8 @@
 };
 
 &qspi {
-	bspi-sel = <0>;
-	flash: m25p80@0 {
+	status = "okay";
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p80";
diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/broadcom/bcm958623hr.dts
index 9747378db531..fc6ab73ecf56 100644
--- a/arch/arm/boot/dts/bcm958623hr.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958623hr.dts
@@ -37,7 +37,7 @@
 
 / {
 	model = "NorthStar Plus SVK (BCM958623HR)";
-	compatible = "brcm,bcm58623", "brcm,nsp";
+	compatible = "brcm,bcm958623hr", "brcm,bcm58623", "brcm,nsp";
 
 	chosen {
 		stdout-path = "serial0:115200n8";
@@ -142,8 +142,8 @@
 };
 
 &qspi {
-	bspi-sel = <0>;
-	flash: m25p80@0 {
+	status = "okay";
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p80";
diff --git a/arch/arm/boot/dts/broadcom/bcm958625-meraki-alamo.dtsi b/arch/arm/boot/dts/broadcom/bcm958625-meraki-alamo.dtsi
new file mode 100644
index 000000000000..c54451dde6dd
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-alamo.dtsi
@@ -0,0 +1,284 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX65 series (Alamo).
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+#include "bcm958625-meraki-mx6x-common.dtsi"
+
+/ {
+	keys {
+		compatible = "gpio-keys-polled";
+		autorepeat;
+		poll-interval = <20>;
+
+		button-reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpioa 8 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			/* green:wan1-left */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <0>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 25 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			/* green:wan1-right */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 24 GPIO_ACTIVE_LOW>;
+		};
+
+		led-2 {
+			/* green:wan2-left */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 27 GPIO_ACTIVE_LOW>;
+		};
+
+		led-3 {
+			/* green:wan2-right */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <3>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 26 GPIO_ACTIVE_LOW>;
+		};
+
+		led-4 {
+			/* amber:power */
+			function = LED_FUNCTION_FAULT;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&gpioa 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-5 {
+			/* white:status */
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpioa 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&axi {
+	mdio-mux@3f1c0 {
+		compatible = "mdio-mux-mmioreg", "mdio-mux";
+		reg = <0x3f1c0 0x4>;
+		mux-mask = <0x2000>;
+		mdio-parent-bus = <&mdio_ext>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mdio@0 {
+			reg = <0x0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy_port6: phy@0 {
+				reg = <0>;
+			};
+
+			phy_port7: phy@1 {
+				reg = <1>;
+			};
+
+			phy_port8: phy@2 {
+				reg = <2>;
+			};
+
+			phy_port9: phy@3 {
+				reg = <3>;
+			};
+
+			phy_port10: phy@4 {
+				reg = <4>;
+			};
+
+			switch@10 {
+				compatible = "qca,qca8337";
+				reg = <0x10>;
+				dsa,member = <1 0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					port@0 {
+						reg = <0>;
+						ethernet = <&sgmii1>;
+						phy-mode = "sgmii";
+						qca,sgmii-enable-pll;
+						qca,sgmii-txclk-falling-edge;
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						label = "lan8";
+						phy-handle = <&phy_port6>;
+					};
+
+					port@2 {
+						reg = <2>;
+						label = "lan9";
+						phy-handle = <&phy_port7>;
+					};
+
+					port@3 {
+						reg = <3>;
+						label = "lan10";
+						phy-handle = <&phy_port8>;
+					};
+
+					port@4 {
+						reg = <4>;
+						label = "lan11";
+						phy-handle = <&phy_port9>;
+					};
+
+					port@5 {
+						reg = <5>;
+						label = "lan12";
+						phy-handle = <&phy_port10>;
+					};
+				};
+			};
+		};
+
+		mdio-mii@2000 {
+			reg = <0x2000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy_port1: phy@0 {
+				reg = <0>;
+			};
+
+			phy_port2: phy@1 {
+				reg = <1>;
+			};
+
+			phy_port3: phy@2 {
+				reg = <2>;
+			};
+
+			phy_port4: phy@3 {
+				reg = <3>;
+			};
+
+			phy_port5: phy@4 {
+				reg = <4>;
+			};
+
+			switch@10 {
+				compatible = "qca,qca8337";
+				reg = <0x10>;
+				dsa,member = <2 0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					port@0 {
+						reg = <0>;
+						ethernet = <&sgmii0>;
+						phy-mode = "sgmii";
+						qca,sgmii-enable-pll;
+						qca,sgmii-txclk-falling-edge;
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						label = "lan3";
+						phy-handle = <&phy_port1>;
+					};
+
+					port@2 {
+						reg = <2>;
+						label = "lan4";
+						phy-handle = <&phy_port2>;
+					};
+
+					port@3 {
+						reg = <3>;
+						label = "lan5";
+						phy-handle = <&phy_port3>;
+					};
+
+					port@4 {
+						reg = <4>;
+						label = "lan6";
+						phy-handle = <&phy_port4>;
+					};
+
+					port@5 {
+						reg = <5>;
+						label = "lan7";
+						phy-handle = <&phy_port5>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&srab {
+	compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
+	status = "okay";
+	dsa,member = <0 0>;
+
+	ports {
+		port@0 {
+			label = "wan1";
+			reg = <0>;
+		};
+
+		port@1 {
+			label = "wan2";
+			reg = <1>;
+		};
+
+		sgmii0: port@4 {
+			label = "sw0";
+			reg = <4>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		sgmii1: port@5 {
+			label = "sw1";
+			reg = <5>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		port@8 {
+			ethernet = <&amac2>;
+			reg = <8>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm958625-meraki-kingpin.dtsi b/arch/arm/boot/dts/broadcom/bcm958625-meraki-kingpin.dtsi
new file mode 100644
index 000000000000..1830844c8404
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-kingpin.dtsi
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64 series (Kingpin).
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+#include "bcm958625-meraki-mx6x-common.dtsi"
+
+/ {
+
+	keys {
+		compatible = "gpio-keys-polled";
+		autorepeat;
+		poll-interval = <20>;
+
+		button-reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpioa 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			/* green:lan1-left */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <0>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 19 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			/* green:lan1-right */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 18 GPIO_ACTIVE_LOW>;
+		};
+
+		led-2 {
+			/* green:lan2-left */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 24 GPIO_ACTIVE_LOW>;
+		};
+
+		led-3 {
+			/* green:lan2-right */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <3>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 20 GPIO_ACTIVE_LOW>;
+		};
+
+		led-4 {
+			/* green:lan3-left */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <4>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 26 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5 {
+			/* green:lan3-right */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <5>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 25 GPIO_ACTIVE_LOW>;
+		};
+
+		led-6 {
+			/* green:lan4-left */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <6>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 28 GPIO_ACTIVE_LOW>;
+		};
+
+		led-7 {
+			/* green:lan4-right */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <7>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 27 GPIO_ACTIVE_LOW>;
+		};
+
+		led-8 {
+			/* green:wan-left */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <8>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 30 GPIO_ACTIVE_LOW>;
+		};
+
+		led-9 {
+			/* green:wan-right */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <9>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 29 GPIO_ACTIVE_LOW>;
+		};
+
+		led-a {
+			/* amber:power */
+			function = LED_FUNCTION_FAULT;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&gpioa 0 GPIO_ACTIVE_LOW>;
+		};
+
+		led-b {
+			/* white:status */
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpioa 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&srab {
+	compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan1";
+			reg = <0>;
+		};
+
+		port@1 {
+			label = "lan2";
+			reg = <1>;
+		};
+
+		port@2 {
+			label = "lan3";
+			reg = <2>;
+		};
+
+		port@3 {
+			label = "lan4";
+			reg = <3>;
+		};
+
+		port@4 {
+			label = "wan";
+			reg = <4>;
+		};
+
+		port@8 {
+			ethernet = <&amac2>;
+			reg = <8>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64-a0.dts b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64-a0.dts
new file mode 100644
index 000000000000..9944566c1195
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64-a0.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64 with A0 SoC.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-kingpin.dtsi"
+#include "bcm-nsp-ax.dtsi"
+
+/ {
+	model = "Cisco Meraki MX64(A0)";
+	compatible = "meraki,mx64-a0", "brcm,bcm58625", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64.dts b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64.dts
new file mode 100644
index 000000000000..06939438e874
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64 with B0+ SoC.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-kingpin.dtsi"
+
+/ {
+	model = "Cisco Meraki MX64";
+	compatible = "meraki,mx64", "brcm,bcm58625", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64w-a0.dts b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64w-a0.dts
new file mode 100644
index 000000000000..112fddb1eed8
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64w-a0.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64W with A0 SoC.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-kingpin.dtsi"
+#include "bcm-nsp-ax.dtsi"
+
+/ {
+	model = "Cisco Meraki MX64W(A0)";
+	compatible = "meraki,mx64w-a0", "brcm,bcm58625", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64w.dts b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64w.dts
new file mode 100644
index 000000000000..de2e367c3e78
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64w.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64W with B0+ SoC.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-kingpin.dtsi"
+
+/ {
+	model = "Cisco Meraki MX64W";
+	compatible = "meraki,mx64w", "brcm,bcm58625", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx65.dts b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx65.dts
new file mode 100644
index 000000000000..d1b684dcdbfa
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx65.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX65.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-alamo.dtsi"
+
+/ {
+	model = "Cisco Meraki MX65";
+	compatible = "meraki,mx65", "brcm,bcm58625", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx65w.dts b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx65w.dts
new file mode 100644
index 000000000000..a2165aba3676
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx65w.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX65W.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-alamo.dtsi"
+
+/ {
+	model = "Cisco Meraki MX65W";
+	compatible = "meraki,mx65w", "brcm,bcm58625", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi
new file mode 100644
index 000000000000..7e71aecb7251
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Common Bindings for Cisco Meraki MX64 (Kingpin) and MX65 (Alamo) devices.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	pwm-leds {
+		compatible = "pwm-leds";
+
+		led-1 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_RED>;
+			pwms = <&pwm 1 50000 0>;
+			max-brightness = <255>;
+		};
+
+		led-2 {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			pwms = <&pwm 2 50000 0>;
+			max-brightness = <255>;
+		};
+
+		led-3 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_BLUE>;
+			pwms = <&pwm 3 50000 0>;
+			max-brightness = <255>;
+		};
+	};
+};
+
+&amac2 {
+	status = "okay";
+	nvmem-cells = <&mac_address>;
+	nvmem-cell-names = "mac-address";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		read-only;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			mac_address: mac-address@66 {
+				reg = <0x66 0x6>;
+			};
+		};
+	};
+};
+
+&nand_controller {
+	nand@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x80000>;
+			read-only;
+		};
+
+		partition@80000 {
+			label = "shmoo";
+			reg = <0x80000 0x80000>;
+			read-only;
+		};
+
+		partition@100000 {
+			label = "bootkernel1";
+			reg = <0x100000 0x300000>;
+		};
+
+		partition@400000 {
+			label = "nvram";
+			reg = <0x400000 0x100000>;
+		};
+
+		partition@500000 {
+			label = "bootkernel2";
+			reg = <0x500000 0x300000>;
+		};
+
+		partition@800000 {
+			label = "ubi";
+			reg = <0x800000 0x3f700000>;
+		};
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_leds>;
+
+	pwm_leds: pwm_leds {
+		function = "pwm";
+		groups = "pwm1_grp", "pwm2_grp", "pwm3_grp";
+	};
+};
+
+&pwm {
+	status = "okay";
+};
+
+&uart0 {
+	clock-frequency = <62500000>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/broadcom/bcm958625hr.dts
index 0f92b773afb8..a9b6aa04d573 100644
--- a/arch/arm/boot/dts/bcm958625hr.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958625hr.dts
@@ -37,7 +37,7 @@
 
 / {
 	model = "NorthStar Plus SVK (BCM958625HR)";
-	compatible = "brcm,bcm58625", "brcm,nsp";
+	compatible = "brcm,bcm958625hr", "brcm,bcm58625", "brcm,nsp";
 
 	chosen {
 		stdout-path = "serial0:115200n8";
@@ -149,8 +149,8 @@
 };
 
 &qspi {
-	bspi-sel = <0>;
-	flash: m25p80@0 {
+	status = "okay";
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p80";
diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/broadcom/bcm958625k.dts
index 9e984ca0e6df..7996116fc923 100644
--- a/arch/arm/boot/dts/bcm958625k.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958625k.dts
@@ -36,7 +36,7 @@
 
 / {
 	model = "NorthStar Plus SVK (BCM958625K)";
-	compatible = "brcm,bcm58625", "brcm,nsp";
+	compatible = "brcm,bcm958625k", "brcm,bcm58625", "brcm,nsp";
 
 	chosen {
 		stdout-path = "serial0:115200n8";
@@ -153,8 +153,8 @@
 };
 
 &qspi {
-	bspi-sel = <0>;
-	flash: m25p80@0 {
+	status = "okay";
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p80";
diff --git a/arch/arm/boot/dts/broadcom/bcm963138.dts b/arch/arm/boot/dts/broadcom/bcm963138.dts
new file mode 100644
index 000000000000..7fd87e05ec20
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm963138.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm63138.dtsi"
+
+/ {
+	model = "Broadcom BCM963138 Reference Board";
+	compatible = "brcm,bcm963138", "brcm,bcm63138", "brcm,bcmbca";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &serial0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm963138dvt.dts b/arch/arm/boot/dts/broadcom/bcm963138dvt.dts
new file mode 100644
index 000000000000..f60d09908ab9
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm963138dvt.dts
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Broadcom BCM63138 Reference Board DTS
+ */
+
+/dts-v1/;
+
+#include "bcm63138.dtsi"
+
+/ {
+	compatible = "brcm,BCM963138DVT", "brcm,bcm63138", "brcm,bcmbca";
+	model = "Broadcom BCM963138DVT";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &serial0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-ecc-strength = <4>;
+	nand-ecc-step-size = <512>;
+	brcm,nand-oob-sector-size = <16>;
+	nand-on-flash-bbt;
+};
+
+&ahci {
+	status = "okay";
+};
+
+&sata_phy {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm963148.dts b/arch/arm/boot/dts/broadcom/bcm963148.dts
new file mode 100644
index 000000000000..44bca063a327
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm963148.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm63148.dtsi"
+
+/ {
+	model = "Broadcom BCM963148 Reference Board";
+	compatible = "brcm,bcm963148", "brcm,bcm63148", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm963178.dts b/arch/arm/boot/dts/broadcom/bcm963178.dts
new file mode 100644
index 000000000000..098a222cd71a
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm963178.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm63178.dtsi"
+
+/ {
+	model = "Broadcom BCM963178 Reference Board";
+	compatible = "brcm,bcm963178", "brcm,bcm63178", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm96756.dts b/arch/arm/boot/dts/broadcom/bcm96756.dts
new file mode 100644
index 000000000000..402038d3cd0c
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm96756.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6756.dtsi"
+
+/ {
+	model = "Broadcom BCM96756 Reference Board";
+	compatible = "brcm,bcm96756", "brcm,bcm6756", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm96846.dts b/arch/arm/boot/dts/broadcom/bcm96846.dts
new file mode 100644
index 000000000000..943896afb7cc
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm96846.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6846.dtsi"
+
+/ {
+	model = "Broadcom BCM96846 Reference Board";
+	compatible = "brcm,bcm96846", "brcm,bcm6846", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm96855.dts b/arch/arm/boot/dts/broadcom/bcm96855.dts
new file mode 100644
index 000000000000..571663d9a1ea
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm96855.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6855.dtsi"
+
+/ {
+	model = "Broadcom BCM96855 Reference Board";
+	compatible = "brcm,bcm96855", "brcm,bcm6855", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm96878.dts b/arch/arm/boot/dts/broadcom/bcm96878.dts
new file mode 100644
index 000000000000..8d6eddd54c6e
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm96878.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6878.dtsi"
+
+/ {
+	model = "Broadcom BCM96878 Reference Board";
+	compatible = "brcm,bcm96878", "brcm,bcm6878", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/broadcom/bcm988312hr.dts
index 5475dab8181d..663a3f27b6e4 100644
--- a/arch/arm/boot/dts/bcm988312hr.dts
+++ b/arch/arm/boot/dts/broadcom/bcm988312hr.dts
@@ -37,7 +37,7 @@
 
 / {
 	model = "NorthStar Plus SVK (BCM988312HR)";
-	compatible = "brcm,bcm88312", "brcm,nsp";
+	compatible = "brcm,bcm988312hr", "brcm,bcm88312", "brcm,nsp";
 
 	chosen {
 		stdout-path = "serial0:115200n8";
@@ -58,6 +58,10 @@
 
 /* USB 3 support needed to be complete */
 
+&dma {
+	status = "okay";
+};
+
 &amac0 {
 	status = "okay";
 };
@@ -134,8 +138,8 @@
 };
 
 &qspi {
-	bspi-sel = <0>;
-	flash: m25p80@0 {
+	status = "okay";
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p80";
diff --git a/arch/arm/boot/dts/bcm9hmidc.dtsi b/arch/arm/boot/dts/broadcom/bcm9hmidc.dtsi
index 65397c088335..65397c088335 100644
--- a/arch/arm/boot/dts/bcm9hmidc.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm9hmidc.dtsi
diff --git a/arch/arm/boot/dts/calxeda/Makefile b/arch/arm/boot/dts/calxeda/Makefile
new file mode 100644
index 000000000000..f5126b6d26ad
--- /dev/null
+++ b/arch/arm/boot/dts/calxeda/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_HIGHBANK) += \
+	highbank.dtb \
+	ecx-2000.dtb
+dtb-$(CONFIG_ARCH_HIGHBANK) += \
+	highbank.dtb \
+	ecx-2000.dtb
diff --git a/arch/arm/boot/dts/ecx-2000.dts b/arch/arm/boot/dts/calxeda/ecx-2000.dts
index f6eb71553b95..f6eb71553b95 100644
--- a/arch/arm/boot/dts/ecx-2000.dts
+++ b/arch/arm/boot/dts/calxeda/ecx-2000.dts
diff --git a/arch/arm/boot/dts/ecx-common.dtsi b/arch/arm/boot/dts/calxeda/ecx-common.dtsi
index 57a028a69373..ce5221c6b358 100644
--- a/arch/arm/boot/dts/ecx-common.dtsi
+++ b/arch/arm/boot/dts/calxeda/ecx-common.dtsi
@@ -9,11 +9,11 @@
 	};
 
 	psci {
-		compatible	= "arm,psci";
-		method		= "smc";
-		cpu_suspend	= <0x84000002>;
-		cpu_off		= <0x84000004>;
-		cpu_on		= <0x84000006>;
+		compatible = "arm,psci";
+		method = "smc";
+		cpu_suspend = <0x84000002>;
+		cpu_off = <0x84000004>;
+		cpu_on = <0x84000006>;
 	};
 
 	soc {
diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/calxeda/highbank.dts
index b6b0225a769e..b6b0225a769e 100644
--- a/arch/arm/boot/dts/highbank.dts
+++ b/arch/arm/boot/dts/calxeda/highbank.dts
diff --git a/arch/arm/boot/dts/cirrus/Makefile b/arch/arm/boot/dts/cirrus/Makefile
new file mode 100644
index 000000000000..e6015983e464
--- /dev/null
+++ b/arch/arm/boot/dts/cirrus/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_CLPS711X) += \
+	ep7211-edb7211.dtb
+dtb-$(CONFIG_ARCH_CLPS711X) += \
+	ep7211-edb7211.dtb
+dtb-$(CONFIG_ARCH_EP93XX) += \
+	ep93xx-edb9302.dtb \
+	ep93xx-bk3.dtb \
+	ep93xx-ts7250.dtb
diff --git a/arch/arm/boot/dts/ep7209.dtsi b/arch/arm/boot/dts/cirrus/ep7209.dtsi
index 57bdad2c1994..57bdad2c1994 100644
--- a/arch/arm/boot/dts/ep7209.dtsi
+++ b/arch/arm/boot/dts/cirrus/ep7209.dtsi
diff --git a/arch/arm/boot/dts/ep7211-edb7211.dts b/arch/arm/boot/dts/cirrus/ep7211-edb7211.dts
index 7fb532f227af..0b15ccaa762e 100644
--- a/arch/arm/boot/dts/ep7211-edb7211.dts
+++ b/arch/arm/boot/dts/cirrus/ep7211-edb7211.dts
@@ -30,7 +30,7 @@
 
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: 320x240 {
+			timing0: timing-320x240 {
 				hactive = <320>;
 				hback-porch = <0>;
 				hfront-porch = <0>;
@@ -46,8 +46,8 @@
 
 	i2c: i2c {
 		compatible = "i2c-gpio";
-		gpios = <&portd 4 GPIO_ACTIVE_HIGH>,
-			<&portd 5 GPIO_ACTIVE_HIGH>;
+		sda-gpios = <&portd 4 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&portd 5 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,delay-us = <2>;
 		i2c-gpio,scl-output-only;
 		#address-cells = <1>;
@@ -88,7 +88,7 @@
 };
 
 &portd {
-	lcden {
+	lcden-hog {
 		gpio-hog;
 		gpios = <2 GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/ep7211.dtsi b/arch/arm/boot/dts/cirrus/ep7211.dtsi
index 32a4e1237145..32a4e1237145 100644
--- a/arch/arm/boot/dts/ep7211.dtsi
+++ b/arch/arm/boot/dts/cirrus/ep7211.dtsi
diff --git a/arch/arm/boot/dts/cirrus/ep93xx-bk3.dts b/arch/arm/boot/dts/cirrus/ep93xx-bk3.dts
new file mode 100644
index 000000000000..40bc9b2a6ba8
--- /dev/null
+++ b/arch/arm/boot/dts/cirrus/ep93xx-bk3.dts
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Liebherr controller BK3.1 based on Cirrus EP9302 SoC
+ */
+/dts-v1/;
+#include "ep93xx.dtsi"
+
+/ {
+	model = "Liebherr controller BK3.1";
+	compatible = "liebherr,bk3", "cirrus,ep9301";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen {
+	};
+
+	memory@0 {
+		device_type = "memory";
+		/* should be set from ATAGS */
+		reg = <0x00000000 0x02000000>,
+		      <0x000530c0 0x01fdd000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-0 {
+			label = "grled";
+			gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			function = LED_FUNCTION_HEARTBEAT;
+		};
+
+		led-1 {
+			label = "rdled";
+			gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_FAULT;
+		};
+	};
+};
+
+&ebi {
+	nand-controller@60000000 {
+		compatible = "technologic,ts7200-nand";
+		reg = <0x60000000 0x8000000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		nand@0 {
+			reg = <0>;
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "System";
+					reg = <0x00000000 0x01e00000>;
+					read-only;
+				};
+
+				partition@1e00000 {
+					label = "Data";
+					reg = <0x01e00000 0x05f20000>;
+				};
+
+				partition@7d20000 {
+					label = "RedBoot";
+					reg = <0x07d20000 0x002e0000>;
+					read-only;
+				};
+			};
+		};
+	};
+};
+
+&eth0 {
+	phy-handle = <&phy0>;
+};
+
+&i2s {
+	dmas = <&dma0 0 1>, <&dma0 0 2>;
+	dma-names = "tx", "rx";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s_on_ac97_pins>;
+	status = "okay";
+};
+
+&gpio1 {
+	/* PWM */
+	gpio-ranges = <&syscon 6 163 1>;
+};
+
+&gpio4 {
+	gpio-ranges = <&syscon 0 97 2>;
+	status = "okay";
+};
+
+&gpio6 {
+	gpio-ranges = <&syscon 0 87 2>;
+	status = "okay";
+};
+
+&gpio7 {
+	gpio-ranges = <&syscon 2 199 4>;
+	status = "okay";
+};
+
+&mdio0 {
+	phy0: ethernet-phy@1 {
+		reg = <1>;
+		device_type = "ethernet-phy";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/cirrus/ep93xx-edb9302.dts b/arch/arm/boot/dts/cirrus/ep93xx-edb9302.dts
new file mode 100644
index 000000000000..312b2be1c638
--- /dev/null
+++ b/arch/arm/boot/dts/cirrus/ep93xx-edb9302.dts
@@ -0,0 +1,181 @@
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+/*
+ * Device Tree file for Cirrus Logic EDB9302 board based on EP9302 SoC
+ */
+/dts-v1/;
+#include "ep93xx.dtsi"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "cirrus,edb9302", "cirrus,ep9301";
+	model = "cirrus,edb9302";
+
+	chosen {
+	};
+
+	memory@0 {
+		device_type = "memory";
+		/* should be set from ATAGS */
+		reg = <0x0000000 0x800000>,
+		      <0x1000000 0x800000>,
+		      <0x4000000 0x800000>,
+		      <0x5000000 0x800000>;
+	};
+
+	sound {
+		compatible = "audio-graph-card2";
+		label = "EDB93XX";
+		links = <&i2s_port>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-0 {
+			label = "grled";
+			gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			function = LED_FUNCTION_HEARTBEAT;
+		};
+
+		led-1 {
+			label = "rdled";
+			gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_FAULT;
+		};
+	};
+};
+
+&adc {
+	status = "okay";
+};
+
+&ebi {
+	flash@60000000 {
+		compatible = "cfi-flash";
+		reg = <0x60000000 0x1000000>;
+		bank-width = <2>;
+	};
+};
+
+&eth0 {
+	phy-handle = <&phy0>;
+};
+
+&gpio0 {
+	gpio-ranges = <&syscon 0 153 1>,
+		      <&syscon 1 152 1>,
+		      <&syscon 2 151 1>,
+		      <&syscon 3 148 1>,
+		      <&syscon 4 147 1>,
+		      <&syscon 5 146 1>,
+		      <&syscon 6 145 1>,
+		      <&syscon 7 144 1>;
+};
+
+&gpio1 {
+	gpio-ranges = <&syscon 0 143 1>,
+		      <&syscon 1 142 1>,
+		      <&syscon 2 141 1>,
+		      <&syscon 3 140 1>,
+		      <&syscon 4 165 1>,
+		      <&syscon 5 164 1>,
+		      <&syscon 6 163 1>,
+		      <&syscon 7 160 1>;
+};
+
+&gpio2 {
+	gpio-ranges = <&syscon 0 115 1>;
+};
+
+/* edb9302 doesn't have GPIO Port D present */
+&gpio3 {
+	status = "disabled";
+};
+
+&gpio4 {
+	gpio-ranges = <&syscon 0 97 2>;
+};
+
+&gpio5 {
+	gpio-ranges = <&syscon 1 170 1>,
+		      <&syscon 2 169 1>,
+		      <&syscon 3 168 1>;
+};
+
+&gpio6 {
+	gpio-ranges = <&syscon 0 87 2>;
+};
+
+&gpio7 {
+	gpio-ranges = <&syscon 2 199 4>;
+};
+
+&i2s {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s_on_ac97_pins>;
+	status = "okay";
+	i2s_port: port {
+		i2s_ep: endpoint {
+			system-clock-direction-out;
+			frame-master;
+			bitclock-master;
+			mclk-fs = <256>;
+			dai-format = "i2s";
+			convert-channels = <2>;
+			convert-sample-format = "s32_le";
+			remote-endpoint = <&codec_ep>;
+		};
+	};
+};
+
+&mdio0 {
+	phy0: ethernet-phy@1 {
+		reg = <1>;
+		device_type = "ethernet-phy";
+	};
+};
+
+&spi0 {
+	cs-gpios = <&gpio0 6 GPIO_ACTIVE_LOW
+		    &gpio0 7 GPIO_ACTIVE_LOW>;
+	dmas = <&dma1 10 2>, <&dma1 10 1>;
+	dma-names = "rx", "tx";
+	status = "okay";
+
+	cs4271: codec@0 {
+		compatible = "cirrus,cs4271";
+		reg = <0>;
+		#sound-dai-cells = <0>;
+		spi-max-frequency = <6000000>;
+		spi-cpol;
+		spi-cpha;
+		reset-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+		port {
+			codec_ep: endpoint {
+				remote-endpoint = <&i2s_ep>;
+			};
+		};
+	};
+
+	at25f1024: eeprom@1 {
+		compatible = "atmel,at25";
+		reg = <1>;
+		address-width = <8>;
+		size = <0x20000>;
+		pagesize = <256>;
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/cirrus/ep93xx-ts7250.dts b/arch/arm/boot/dts/cirrus/ep93xx-ts7250.dts
new file mode 100644
index 000000000000..9e03f93d9fc8
--- /dev/null
+++ b/arch/arm/boot/dts/cirrus/ep93xx-ts7250.dts
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Technologic Systems ts7250 board based on Cirrus EP9302 SoC
+ */
+/dts-v1/;
+#include "ep93xx.dtsi"
+
+/ {
+	compatible = "technologic,ts7250", "cirrus,ep9301";
+	model = "TS-7250 SBC";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen {
+	};
+
+	memory@0 {
+		device_type = "memory";
+		/* should be set from ATAGS */
+		reg = <0x00000000 0x02000000>,
+		      <0x000530c0 0x01fdd000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-0 {
+			label = "grled";
+			gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			function = LED_FUNCTION_HEARTBEAT;
+		};
+
+		led-1 {
+			label = "rdled";
+			gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_FAULT;
+		};
+	};
+};
+
+&ebi {
+	nand-controller@60000000 {
+		compatible = "technologic,ts7200-nand";
+		reg = <0x60000000 0x8000000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		nand@0 {
+			reg = <0>;
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "TS-BOOTROM";
+					reg = <0x00000000 0x00020000>;
+					read-only;
+				};
+
+				partition@20000 {
+					label = "Linux";
+					reg = <0x00020000 0x07d00000>;
+				};
+
+				partition@7d20000 {
+					label = "RedBoot";
+					reg = <0x07d20000 0x002e0000>;
+					read-only;
+				};
+			};
+		};
+	};
+
+	rtc@10800000 {
+		compatible = "st,m48t86";
+		reg = <0x10800000 0x1>,
+			<0x11700000 0x1>;
+	};
+
+	watchdog@23800000 {
+		compatible = "technologic,ts7200-wdt";
+		reg = <0x23800000 0x01>,
+			<0x23c00000 0x01>;
+		timeout-sec = <30>;
+	};
+};
+
+&eth0 {
+	phy-handle = <&phy0>;
+};
+
+&gpio1 {
+	/* PWM */
+	gpio-ranges = <&syscon 6 163 1>;
+};
+
+/* ts7250 doesn't have GPIO Port D present */
+&gpio3 {
+	status = "disabled";
+};
+
+&gpio4 {
+	gpio-ranges = <&syscon 0 97 2>;
+};
+
+&gpio6 {
+	gpio-ranges = <&syscon 0 87 2>;
+};
+
+&gpio7 {
+	gpio-ranges = <&syscon 2 199 4>;
+};
+
+&spi0 {
+	cs-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+	dmas = <&dma1 10 2>, <&dma1 10 1>;
+	dma-names = "rx", "tx";
+	status = "okay";
+
+	tmp122: temperature-sensor@0 {
+		compatible = "ti,tmp122";
+		reg = <0>;
+		spi-max-frequency = <2000000>;
+	};
+};
+
+&mdio0 {
+	phy0: ethernet-phy@1 {
+		reg = <1>;
+		device_type = "ethernet-phy";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/cirrus/ep93xx.dtsi b/arch/arm/boot/dts/cirrus/ep93xx.dtsi
new file mode 100644
index 000000000000..0dd1eee346ca
--- /dev/null
+++ b/arch/arm/boot/dts/cirrus/ep93xx.dtsi
@@ -0,0 +1,444 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Cirrus Logic systems EP93XX SoC
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/clock/cirrus,ep9301-syscon.h>
+/ {
+	soc: soc {
+		compatible = "simple-bus";
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		syscon: syscon@80930000 {
+			compatible = "cirrus,ep9301-syscon", "syscon";
+			reg = <0x80930000 0x1000>;
+
+			#clock-cells = <1>;
+			clocks = <&xtali>;
+
+			spi_default_pins: pins-spi {
+				function = "spi";
+				groups = "ssp";
+			};
+
+			ac97_default_pins: pins-ac97 {
+				function = "ac97";
+				groups = "ac97";
+			};
+
+			i2s_on_ssp_pins: pins-i2sonssp {
+				function = "i2s";
+				groups = "i2s_on_ssp";
+			};
+
+			i2s_on_ac97_pins: pins-i2sonac97 {
+				function = "i2s";
+				groups = "i2s_on_ac97";
+			};
+
+			gpio1_default_pins: pins-gpio1 {
+				function = "gpio";
+				groups = "gpio1agrp";
+			};
+
+			pwm1_default_pins: pins-pwm1 {
+				function = "pwm";
+				groups = "pwm1";
+			};
+
+			gpio2_default_pins: pins-gpio2 {
+				function = "gpio";
+				groups = "gpio2agrp";
+			};
+
+			gpio3_default_pins: pins-gpio3 {
+				function = "gpio";
+				groups = "gpio3agrp";
+			};
+
+			keypad_default_pins: pins-keypad {
+				function = "keypad";
+				groups = "keypadgrp";
+			};
+
+			gpio4_default_pins: pins-gpio4 {
+				function = "gpio";
+				groups = "gpio4agrp";
+			};
+
+			gpio6_default_pins: pins-gpio6 {
+				function = "gpio";
+				groups = "gpio6agrp";
+			};
+
+			gpio7_default_pins: pins-gpio7 {
+				function = "gpio";
+				groups = "gpio7agrp";
+			};
+
+			ide_default_pins: pins-ide {
+				function = "pata";
+				groups = "idegrp";
+			};
+
+			lcd_on_dram0_pins: pins-rasteronsdram0 {
+				function = "lcd";
+				groups = "rasteronsdram0grp";
+			};
+
+			lcd_on_dram3_pins: pins-rasteronsdram3 {
+				function = "lcd";
+				groups = "rasteronsdram3grp";
+			};
+		};
+
+		adc: adc@80900000 {
+			compatible = "cirrus,ep9301-adc";
+			reg = <0x80900000 0x28>;
+			clocks = <&syscon EP93XX_CLK_ADC>;
+			interrupt-parent = <&vic0>;
+			interrupts = <30>;
+			status = "disabled";
+		};
+
+		/*
+		 * The EP93XX expansion bus is a set of up to 7 each up to 16MB
+		 * windows in the 256MB space from 0x50000000 to 0x5fffffff.
+		 * But since we don't require to setup it in any way, we can
+		 * represent it as a simple-bus.
+		 */
+		ebi: bus@80080000 {
+			compatible = "simple-bus";
+			reg = <0x80080000 0x20>;
+			native-endian;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+		};
+
+		dma0: dma-controller@80000000 {
+			compatible = "cirrus,ep9301-dma-m2p";
+			reg = <0x80000000 0x0040>,
+			      <0x80000040 0x0040>,
+			      <0x80000080 0x0040>,
+			      <0x800000c0 0x0040>,
+			      <0x80000240 0x0040>,
+			      <0x80000200 0x0040>,
+			      <0x800002c0 0x0040>,
+			      <0x80000280 0x0040>,
+			      <0x80000340 0x0040>,
+			      <0x80000300 0x0040>;
+			clocks = <&syscon EP93XX_CLK_M2P0>,
+				 <&syscon EP93XX_CLK_M2P1>,
+				 <&syscon EP93XX_CLK_M2P2>,
+				 <&syscon EP93XX_CLK_M2P3>,
+				 <&syscon EP93XX_CLK_M2P4>,
+				 <&syscon EP93XX_CLK_M2P5>,
+				 <&syscon EP93XX_CLK_M2P6>,
+				 <&syscon EP93XX_CLK_M2P7>,
+				 <&syscon EP93XX_CLK_M2P8>,
+				 <&syscon EP93XX_CLK_M2P9>;
+			clock-names = "m2p0", "m2p1",
+				      "m2p2", "m2p3",
+				      "m2p4", "m2p5",
+				      "m2p6", "m2p7",
+				      "m2p8", "m2p9";
+			interrupt-parent = <&vic0>;
+			interrupts = <7>, <8>, <9>, <10>, <11>,
+				<12>, <13>, <14>, <15>, <16>;
+			#dma-cells = <2>;
+		};
+
+		dma1: dma-controller@80000100 {
+			compatible = "cirrus,ep9301-dma-m2m";
+			reg = <0x80000100 0x0040>,
+			      <0x80000140 0x0040>;
+			clocks = <&syscon EP93XX_CLK_M2M0>,
+				 <&syscon EP93XX_CLK_M2M1>;
+			clock-names = "m2m0", "m2m1";
+			interrupt-parent = <&vic0>;
+			interrupts = <17>, <18>;
+			#dma-cells = <2>;
+		};
+
+		eth0: ethernet@80010000 {
+			compatible = "cirrus,ep9301-eth";
+			reg = <0x80010000 0x10000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <7>;
+			mdio0: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		gpio0: gpio@80840000 {
+			compatible = "cirrus,ep9301-gpio";
+			reg = <0x80840000 0x04>,
+			      <0x80840010 0x04>,
+			      <0x80840090 0x1c>;
+			reg-names = "data", "dir", "intr";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&vic1>;
+			interrupts = <27>;
+		};
+
+		gpio1: gpio@80840004 {
+			compatible = "cirrus,ep9301-gpio";
+			reg = <0x80840004 0x04>,
+			      <0x80840014 0x04>,
+			      <0x808400ac 0x1c>;
+			reg-names = "data", "dir", "intr";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&vic1>;
+			interrupts = <27>;
+		};
+
+		gpio2: gpio@80840008 {
+			compatible = "cirrus,ep9301-gpio";
+			reg = <0x80840008 0x04>,
+			      <0x80840018 0x04>;
+			reg-names = "data", "dir";
+			gpio-controller;
+			#gpio-cells = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio2_default_pins>;
+		};
+
+		gpio3: gpio@8084000c {
+			compatible = "cirrus,ep9301-gpio";
+			reg = <0x8084000c 0x04>,
+			      <0x8084001c 0x04>;
+			reg-names = "data", "dir";
+			gpio-controller;
+			#gpio-cells = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio3_default_pins>;
+		};
+
+		gpio4: gpio@80840020 {
+			compatible = "cirrus,ep9301-gpio";
+			reg = <0x80840020 0x04>,
+			      <0x80840024 0x04>;
+			reg-names = "data", "dir";
+			gpio-controller;
+			#gpio-cells = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio4_default_pins>;
+		};
+
+		gpio5: gpio@80840030 {
+			compatible = "cirrus,ep9301-gpio";
+			reg = <0x80840030 0x04>,
+			      <0x80840034 0x04>,
+			      <0x8084004c 0x1c>;
+			reg-names = "data", "dir", "intr";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts-extended = <&vic0 19>, <&vic0 20>,
+					      <&vic0 21>, <&vic0 22>,
+					      <&vic1 15>, <&vic1 16>,
+					      <&vic1 17>, <&vic1 18>;
+		};
+
+		gpio6: gpio@80840038 {
+			compatible = "cirrus,ep9301-gpio";
+			reg = <0x80840038 0x04>,
+			      <0x8084003c 0x04>;
+			reg-names = "data", "dir";
+			gpio-controller;
+			#gpio-cells = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio6_default_pins>;
+		};
+
+		gpio7: gpio@80840040 {
+			compatible = "cirrus,ep9301-gpio";
+			reg = <0x80840040 0x04>,
+			      <0x80840044 0x04>;
+			reg-names = "data", "dir";
+			gpio-controller;
+			#gpio-cells = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio7_default_pins>;
+		};
+
+		i2s: i2s@80820000 {
+			compatible = "cirrus,ep9301-i2s";
+			reg = <0x80820000 0x100>;
+			#sound-dai-cells = <0>;
+			interrupt-parent = <&vic1>;
+			interrupts = <28>;
+			clocks = <&syscon EP93XX_CLK_I2S_MCLK>,
+				 <&syscon EP93XX_CLK_I2S_SCLK>,
+				 <&syscon EP93XX_CLK_I2S_LRCLK>;
+			clock-names = "mclk", "sclk", "lrclk";
+			dmas = <&dma0 0 1>, <&dma0 0 2>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		ide: ide@800a0000 {
+			compatible = "cirrus,ep9312-pata";
+			reg = <0x800a0000 0x38>;
+			interrupt-parent = <&vic1>;
+			interrupts = <8>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&ide_default_pins>;
+			status = "disabled";
+		};
+
+		vic0: interrupt-controller@800b0000 {
+			compatible = "arm,pl192-vic";
+			reg = <0x800b0000 0x1000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			valid-mask = <0x7ffffffc>;
+			valid-wakeup-mask = <0x0>;
+		};
+
+		vic1: interrupt-controller@800c0000 {
+			compatible = "arm,pl192-vic";
+			reg = <0x800c0000 0x1000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			valid-mask = <0x1fffffff>;
+			valid-wakeup-mask = <0x0>;
+		};
+
+		keypad: keypad@800f0000 {
+			compatible = "cirrus,ep9307-keypad";
+			reg = <0x800f0000 0x0c>;
+			interrupt-parent = <&vic0>;
+			interrupts = <29>;
+			clocks = <&syscon EP93XX_CLK_KEYPAD>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&keypad_default_pins>;
+			linux,keymap =	<KEY_UP>,
+					<KEY_DOWN>,
+					<KEY_VOLUMEDOWN>,
+					<KEY_HOME>,
+					<KEY_RIGHT>,
+					<KEY_LEFT>,
+					<KEY_ENTER>,
+					<KEY_VOLUMEUP>,
+					<KEY_F6>,
+					<KEY_F8>,
+					<KEY_F9>,
+					<KEY_F10>,
+					<KEY_F1>,
+					<KEY_F2>,
+					<KEY_F3>,
+					<KEY_POWER>;
+		};
+
+		pwm0: pwm@80910000 {
+			compatible = "cirrus,ep9301-pwm";
+			reg = <0x80910000 0x10>;
+			clocks = <&syscon EP93XX_CLK_PWM>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@80910020 {
+			compatible = "cirrus,ep9301-pwm";
+			reg = <0x80910020 0x10>;
+			clocks = <&syscon EP93XX_CLK_PWM>;
+			#pwm-cells = <3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwm1_default_pins>;
+			status = "disabled";
+		};
+
+		rtc0: rtc@80920000 {
+			compatible = "cirrus,ep9301-rtc";
+			reg = <0x80920000 0x100>;
+		};
+
+		spi0: spi@808a0000 {
+			compatible = "cirrus,ep9301-spi";
+			reg = <0x808a0000 0x18>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&vic1>;
+			interrupts = <21>;
+			clocks = <&syscon EP93XX_CLK_SPI>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi_default_pins>;
+			status = "disabled";
+		};
+
+		timer: timer@80810000 {
+			compatible = "cirrus,ep9301-timer";
+			reg = <0x80810000 0x100>;
+			interrupt-parent = <&vic1>;
+			interrupts = <19>;
+		};
+
+		uart0: serial@808c0000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x808c0000 0x1000>;
+			arm,primecell-periphid = <0x00041010>;
+			clocks = <&syscon EP93XX_CLK_UART1>, <&syscon EP93XX_CLK_UART>;
+			clock-names = "uartclk", "apb_pclk";
+			interrupt-parent = <&vic1>;
+			interrupts = <20>;
+			status = "disabled";
+		};
+
+		uart1: uart@808d0000 {
+			compatible = "arm,primecell";
+			reg = <0x808d0000 0x1000>;
+			arm,primecell-periphid = <0x00041010>;
+			clocks = <&syscon EP93XX_CLK_UART2>, <&syscon EP93XX_CLK_UART>;
+			clock-names = "apb:uart2", "apb_pclk";
+			interrupt-parent = <&vic1>;
+			interrupts = <22>;
+			status = "disabled";
+		};
+
+		uart2: uart@808b0000 {
+			compatible = "arm,primecell";
+			reg = <0x808b0000 0x1000>;
+			arm,primecell-periphid = <0x00041010>;
+			clocks = <&syscon EP93XX_CLK_UART3>, <&syscon EP93XX_CLK_UART>;
+			clock-names = "apb:uart3", "apb_pclk";
+			interrupt-parent = <&vic1>;
+			interrupts = <23>;
+			status = "disabled";
+		};
+
+		usb0: usb@80020000 {
+			compatible = "generic-ohci";
+			reg = <0x80020000 0x10000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <24>;
+			clocks = <&syscon EP93XX_CLK_USB>;
+			status = "disabled";
+		};
+
+		watchdog0: watchdog@80940000 {
+			compatible = "cirrus,ep9301-wdt";
+			reg = <0x80940000 0x08>;
+		};
+	};
+
+	xtali: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <14745600>;
+		clock-output-names = "xtali";
+	};
+};
diff --git a/arch/arm/boot/dts/cnxt/Makefile b/arch/arm/boot/dts/cnxt/Makefile
new file mode 100644
index 000000000000..d49df53f65a1
--- /dev/null
+++ b/arch/arm/boot/dts/cnxt/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_DIGICOLOR) += \
+	cx92755_equinox.dtb
+dtb-$(CONFIG_ARCH_DIGICOLOR) += \
+	cx92755_equinox.dtb
diff --git a/arch/arm/boot/dts/cx92755.dtsi b/arch/arm/boot/dts/cnxt/cx92755.dtsi
index d2e8f36f8c60..227675fbe820 100644
--- a/arch/arm/boot/dts/cx92755.dtsi
+++ b/arch/arm/boot/dts/cnxt/cx92755.dtsi
@@ -107,7 +107,7 @@
 		reg = <0xf00003a0 0x10>;
 	};
 
-	uart0: uart@f0000740 {
+	uart0: serial@f0000740 {
 		compatible = "cnxt,cx92755-usart";
 		reg = <0xf0000740 0x20>;
 		clocks = <&main_clk>;
@@ -115,7 +115,7 @@
 		status = "disabled";
 	};
 
-	uart1: uart@f0000760 {
+	uart1: serial@f0000760 {
 		compatible = "cnxt,cx92755-usart";
 		reg = <0xf0000760 0x20>;
 		clocks = <&main_clk>;
@@ -123,7 +123,7 @@
 		status = "disabled";
 	};
 
-	uart2: uart@f0000780 {
+	uart2: serial@f0000780 {
 		compatible = "cnxt,cx92755-usart";
 		reg = <0xf0000780 0x20>;
 		clocks = <&main_clk>;
diff --git a/arch/arm/boot/dts/cx92755_equinox.dts b/arch/arm/boot/dts/cnxt/cx92755_equinox.dts
index 026f556c8c50..026f556c8c50 100644
--- a/arch/arm/boot/dts/cx92755_equinox.dts
+++ b/arch/arm/boot/dts/cnxt/cx92755_equinox.dts
diff --git a/arch/arm/boot/dts/dove-d3plug.dts b/arch/arm/boot/dts/dove-d3plug.dts
deleted file mode 100644
index 826026c28f90..000000000000
--- a/arch/arm/boot/dts/dove-d3plug.dts
+++ /dev/null
@@ -1,104 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "dove.dtsi"
-
-/ {
-	model = "Globalscale D3Plug";
-	compatible = "globalscale,d3plug", "marvell,dove";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/mmcblk0p2 rw rootwait";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>;
-		pinctrl-names = "default";
-
-		wlan-act {
-			label = "wlan-act";
-			gpios = <&gpio0 0 1>;
-		};
-
-		wlan-ap {
-			label = "wlan-ap";
-			gpios = <&gpio0 1 1>;
-		};
-
-		status {
-			label = "status";
-			gpios = <&gpio0 2 1>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usb_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 8 0>;
-			pinctrl-0 = <&pmx_gpio_8>;
-			pinctrl-names = "default";
-		};
-	};
-};
-
-&uart0 { status = "okay"; };
-&sata0 { status = "okay"; };
-&i2c0 { status = "okay"; };
-
-/* Samsung M8G2F eMMC */
-&sdio0 {
-	status = "okay";
-	non-removable;
-	bus-width = <4>;
-};
-
-/* Marvell SD8787 WLAN/BT */
-&sdio1 {
-	status = "okay";
-	non-removable;
-};
-
-&spi0 {
-	status = "okay";
-
-	/* spi0.0: 2M Flash Macronix MX25L1605D */
-	spi-flash@0 {
-		compatible = "st,m25l1605d";
-		spi-max-frequency = <86000000>;
-		reg = <0>;
-	};
-};
-
-&pcie {
-	status = "okay";
-	/* Fresco Logic USB3.0 xHCI controller */
-	pcie@1 {
-		status = "okay";
-		reset-gpios = <&gpio0 26 1>;
-		reset-delay-us = <20000>;
-		pinctrl-0 = <&pmx_camera_gpio>;
-		pinctrl-names = "default";
-	};
-	/* Mini-PCIe slot */
-	pcie@2 {
-		status = "okay";
-		reset-gpios = <&gpio0 25 1>;
-	};
-};
diff --git a/arch/arm/boot/dts/dra62x.dtsi b/arch/arm/boot/dts/dra62x.dtsi
deleted file mode 100644
index cc4878aaa8ea..000000000000
--- a/arch/arm/boot/dts/dra62x.dtsi
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include "dm814x.dtsi"
-
-/ {
-	compatible = "ti,dra62x";
-};
-
-/* Compared to dm814x, dra62x has different offsets for Ethernet */
-&mac {
-	reg = <0 0x800>,
-	      <0x1200 0x100>;
-};
-
-&davinci_mdio {
-	reg = <0x1000 0x100>;
-};
-
-#include "dra62x-clocks.dtsi"
diff --git a/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi b/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi
deleted file mode 100644
index e75569383dd8..000000000000
--- a/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Device Tree Source for DRA7x SoC DSPEVE thermal
- *
- * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <dt-bindings/thermal/thermal.h>
-
-dspeve_thermal: dspeve_thermal {
-	polling-delay-passive = <250>; /* milliseconds */
-	polling-delay = <500>; /* milliseconds */
-
-			/* sensor       ID */
-	thermal-sensors = <&bandgap     3>;
-
-	trips {
-		dspeve_crit: dspeve_crit {
-			temperature = <125000>; /* milliCelsius */
-			hysteresis = <2000>; /* milliCelsius */
-			type = "critical";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/dra7-iva-thermal.dtsi b/arch/arm/boot/dts/dra7-iva-thermal.dtsi
deleted file mode 100644
index a7077321613f..000000000000
--- a/arch/arm/boot/dts/dra7-iva-thermal.dtsi
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Device Tree Source for DRA7x SoC IVA thermal
- *
- * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <dt-bindings/thermal/thermal.h>
-
-iva_thermal: iva_thermal {
-	polling-delay-passive = <250>; /* milliseconds */
-	polling-delay = <500>; /* milliseconds */
-
-			/* sensor       ID */
-	thermal-sensors = <&bandgap     4>;
-
-	trips {
-		iva_crit: iva_crit {
-			temperature = <125000>; /* milliCelsius */
-			hysteresis = <2000>; /* milliCelsius */
-			type = "critical";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/dra76x.dtsi b/arch/arm/boot/dts/dra76x.dtsi
deleted file mode 100644
index bc4ae91cba16..000000000000
--- a/arch/arm/boot/dts/dra76x.dtsi
+++ /dev/null
@@ -1,159 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#include "dra74x.dtsi"
-
-/ {
-	compatible = "ti,dra762", "ti,dra7";
-
-	ocp {
-		target-module@42c01900 {
-			compatible = "ti,sysc-dra7-mcan", "ti,sysc";
-			ranges = <0x0 0x42c00000 0x2000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x42c01900 0x4>,
-			      <0x42c01904 0x4>,
-			      <0x42c01908 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET |
-					 SYSC_DRA7_MCAN_ENAWAKEUP)>;
-			ti,syss-mask = <1>;
-			clocks = <&wkupaon_clkctrl DRA7_WKUPAON_ADC_CLKCTRL 0>;
-			clock-names = "fck";
-
-			m_can0: mcan@1a00 {
-				compatible = "bosch,m_can";
-				reg = <0x1a00 0x4000>, <0x0 0x18FC>;
-				reg-names = "m_can", "message_ram";
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "int0", "int1";
-				clocks = <&l3_iclk_div>, <&mcan_clk>;
-				clock-names = "hclk", "cclk";
-				bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>;
-			};
-		};
-	};
-
-};
-
-&l4_per3 {
-	target-module@1b0000 {			/* 0x489b0000, ap 25 34.0 */
-		compatible = "ti,sysc-omap4", "ti,sysc";
-		reg = <0x1b0000 0x4>,
-		      <0x1b0010 0x4>;
-		reg-names = "rev", "sysc";
-		ti,sysc-midle = <SYSC_IDLE_FORCE>,
-				<SYSC_IDLE_NO>;
-		ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-				<SYSC_IDLE_NO>;
-		clocks = <&cam_clkctrl DRA7_CAM_VIP3_CLKCTRL 0>;
-		clock-names = "fck";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0x1b0000 0x10000>;
-
-		cal: cal@0 {
-			compatible = "ti,dra76-cal";
-			reg = <0x0000 0x400>,
-			      <0x0800 0x40>,
-			      <0x0900 0x40>;
-			reg-names = "cal_top",
-				    "cal_rx_core0",
-				    "cal_rx_core1";
-			interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
-			ti,camerrx-control = <&scm_conf 0x6dc>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				csi2_0: port@0 {
-					reg = <0>;
-				};
-				csi2_1: port@1 {
-					reg = <1>;
-				};
-			};
-		};
-	};
-};
-
-&scm_conf_clocks {
-	dpll_gmac_h14x2_ctrl_ck: dpll_gmac_h14x2_ctrl_ck@3fc {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gmac_x2_ck>;
-		ti,max-div = <63>;
-		reg = <0x03fc>;
-		ti,bit-shift=<20>;
-		ti,latch-bit=<26>;
-		assigned-clocks = <&dpll_gmac_h14x2_ctrl_ck>;
-		assigned-clock-rates = <80000000>;
-	};
-
-	dpll_gmac_h14x2_ctrl_mux_ck: dpll_gmac_h14x2_ctrl_mux_ck@3fc {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_gmac_ck>, <&dpll_gmac_h14x2_ctrl_ck>;
-		reg = <0x3fc>;
-		ti,bit-shift = <29>;
-		ti,latch-bit=<26>;
-		assigned-clocks = <&dpll_gmac_h14x2_ctrl_mux_ck>;
-		assigned-clock-parents = <&dpll_gmac_h14x2_ctrl_ck>;
-	};
-
-	mcan_clk: mcan_clk@3fc {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_gmac_h14x2_ctrl_mux_ck>;
-		ti,bit-shift = <27>;
-		reg = <0x3fc>;
-	};
-};
-
-&rtctarget {
-	status = "disabled";
-};
-
-&usb4_tm {
-	status = "disabled";
-};
-
-&mmc3 {
-	/* dra76x is not affected by i887 */
-	max-frequency = <96000000>;
-};
-
-&cpu0_opp_table {
-	opp_plus@1800000000 {
-		opp-hz = /bits/ 64 <1800000000>;
-		opp-microvolt = <1250000 950000 1250000>,
-				<1250000 950000 1250000>;
-		opp-supported-hw = <0xFF 0x08>;
-	};
-};
-
-&opp_supply_mpu {
-	ti,efuse-settings = <
-	/* uV   offset */
-	1060000 0x0
-	1160000 0x4
-	1210000 0x8
-	1250000 0xC
-	>;
-};
-
-&abb_mpu {
-	ti,abb_info = <
-	/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
-	1060000		0	0x0	0 0x02000000 0x01F00000
-	1160000		0	0x4	0 0x02000000 0x01F00000
-	1210000		0	0x8	0 0x02000000 0x01F00000
-	1250000		0	0xC	0 0x02000000 0x01F00000
-	>;
-};
diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
deleted file mode 100644
index 2365554eef3c..000000000000
--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ /dev/null
@@ -1,1863 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for DRA7xx clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- */
-&cm_core_aon_clocks {
-	atl_clkin0_ck: atl_clkin0_ck {
-		#clock-cells = <0>;
-		compatible = "ti,dra7-atl-clock";
-		clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
-	};
-
-	atl_clkin1_ck: atl_clkin1_ck {
-		#clock-cells = <0>;
-		compatible = "ti,dra7-atl-clock";
-		clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
-	};
-
-	atl_clkin2_ck: atl_clkin2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,dra7-atl-clock";
-		clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
-	};
-
-	atl_clkin3_ck: atl_clkin3_ck {
-		#clock-cells = <0>;
-		compatible = "ti,dra7-atl-clock";
-		clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
-	};
-
-	hdmi_clkin_ck: hdmi_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	mlb_clkin_ck: mlb_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	mlbp_clkin_ck: mlbp_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	pciesref_acs_clk_ck: pciesref_acs_clk_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <100000000>;
-	};
-
-	ref_clkin0_ck: ref_clkin0_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	ref_clkin1_ck: ref_clkin1_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	ref_clkin2_ck: ref_clkin2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	ref_clkin3_ck: ref_clkin3_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	rmii_clk_ck: rmii_clk_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	sdvenc_clkin_ck: sdvenc_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	secure_32k_clk_src_ck: secure_32k_clk_src_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	sys_clk32_crystal_ck: sys_clk32_crystal_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	sys_clk32_pseudo_ck: sys_clk32_pseudo_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin1>;
-		clock-mult = <1>;
-		clock-div = <610>;
-	};
-
-	virt_12000000_ck: virt_12000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <12000000>;
-	};
-
-	virt_13000000_ck: virt_13000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <13000000>;
-	};
-
-	virt_16800000_ck: virt_16800000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <16800000>;
-	};
-
-	virt_19200000_ck: virt_19200000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <19200000>;
-	};
-
-	virt_20000000_ck: virt_20000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <20000000>;
-	};
-
-	virt_26000000_ck: virt_26000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
-	};
-
-	virt_27000000_ck: virt_27000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <27000000>;
-	};
-
-	virt_38400000_ck: virt_38400000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <38400000>;
-	};
-
-	sys_clkin2: sys_clkin2 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <22579200>;
-	};
-
-	usb_otg_clkin_ck: usb_otg_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	video1_clkin_ck: video1_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	video1_m2_clkin_ck: video1_m2_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	video2_clkin_ck: video2_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	video2_m2_clkin_ck: video2_m2_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	dpll_abe_ck: dpll_abe_ck@1e0 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-m4xen-clock";
-		clocks = <&abe_dpll_clk_mux>, <&abe_dpll_bypass_clk_mux>;
-		reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>;
-	};
-
-	dpll_abe_x2_ck: dpll_abe_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clocks = <&dpll_abe_ck>;
-	};
-
-	dpll_abe_m2x2_ck: dpll_abe_m2x2_ck@1f0 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x01f0>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	abe_clk: abe_clk@108 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_m2x2_ck>;
-		ti,max-div = <4>;
-		reg = <0x0108>;
-		ti,index-power-of-two;
-	};
-
-	dpll_abe_m2_ck: dpll_abe_m2_ck@1f0 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x01f0>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_abe_m3x2_ck: dpll_abe_m3x2_ck@1f4 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x01f4>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_core_byp_mux: dpll_core_byp_mux@12c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
-		ti,bit-shift = <23>;
-		reg = <0x012c>;
-	};
-
-	dpll_core_ck: dpll_core_ck@120 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-core-clock";
-		clocks = <&sys_clkin1>, <&dpll_core_byp_mux>;
-		reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
-	};
-
-	dpll_core_x2_ck: dpll_core_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clocks = <&dpll_core_ck>;
-	};
-
-	dpll_core_h12x2_ck: dpll_core_h12x2_ck@13c {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x013c>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	mpu_dpll_hs_clk_div: mpu_dpll_hs_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_h12x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_mpu_ck: dpll_mpu_ck@160 {
-		#clock-cells = <0>;
-		compatible = "ti,omap5-mpu-dpll-clock";
-		clocks = <&sys_clkin1>, <&mpu_dpll_hs_clk_div>;
-		reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>;
-	};
-
-	dpll_mpu_m2_ck: dpll_mpu_m2_ck@170 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_mpu_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0170>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	mpu_dclk_div: mpu_dclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_mpu_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dsp_dpll_hs_clk_div: dsp_dpll_hs_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_h12x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_dsp_byp_mux: dpll_dsp_byp_mux@240 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>;
-		ti,bit-shift = <23>;
-		reg = <0x0240>;
-	};
-
-	dpll_dsp_ck: dpll_dsp_ck@234 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&dpll_dsp_byp_mux>;
-		reg = <0x0234>, <0x0238>, <0x0240>, <0x023c>;
-		assigned-clocks = <&dpll_dsp_ck>;
-		assigned-clock-rates = <600000000>;
-	};
-
-	dpll_dsp_m2_ck: dpll_dsp_m2_ck@244 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_dsp_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0244>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-		assigned-clocks = <&dpll_dsp_m2_ck>;
-		assigned-clock-rates = <600000000>;
-	};
-
-	iva_dpll_hs_clk_div: iva_dpll_hs_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_h12x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_iva_byp_mux: dpll_iva_byp_mux@1ac {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>;
-		ti,bit-shift = <23>;
-		reg = <0x01ac>;
-	};
-
-	dpll_iva_ck: dpll_iva_ck@1a0 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&dpll_iva_byp_mux>;
-		reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
-		assigned-clocks = <&dpll_iva_ck>;
-		assigned-clock-rates = <1165000000>;
-	};
-
-	dpll_iva_m2_ck: dpll_iva_m2_ck@1b0 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_iva_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x01b0>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-		assigned-clocks = <&dpll_iva_m2_ck>;
-		assigned-clock-rates = <388333334>;
-	};
-
-	iva_dclk: iva_dclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_iva_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_gpu_byp_mux: dpll_gpu_byp_mux@2e4 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
-		ti,bit-shift = <23>;
-		reg = <0x02e4>;
-	};
-
-	dpll_gpu_ck: dpll_gpu_ck@2d8 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&dpll_gpu_byp_mux>;
-		reg = <0x02d8>, <0x02dc>, <0x02e4>, <0x02e0>;
-		assigned-clocks = <&dpll_gpu_ck>;
-		assigned-clock-rates = <1277000000>;
-	};
-
-	dpll_gpu_m2_ck: dpll_gpu_m2_ck@2e8 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gpu_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x02e8>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-		assigned-clocks = <&dpll_gpu_m2_ck>;
-		assigned-clock-rates = <425666667>;
-	};
-
-	dpll_core_m2_ck: dpll_core_m2_ck@130 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0130>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	core_dpll_out_dclk_div: core_dpll_out_dclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_ddr_byp_mux: dpll_ddr_byp_mux@21c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
-		ti,bit-shift = <23>;
-		reg = <0x021c>;
-	};
-
-	dpll_ddr_ck: dpll_ddr_ck@210 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&dpll_ddr_byp_mux>;
-		reg = <0x0210>, <0x0214>, <0x021c>, <0x0218>;
-	};
-
-	dpll_ddr_m2_ck: dpll_ddr_m2_ck@220 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_ddr_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0220>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_gmac_byp_mux: dpll_gmac_byp_mux@2b4 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
-		ti,bit-shift = <23>;
-		reg = <0x02b4>;
-	};
-
-	dpll_gmac_ck: dpll_gmac_ck@2a8 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&dpll_gmac_byp_mux>;
-		reg = <0x02a8>, <0x02ac>, <0x02b4>, <0x02b0>;
-	};
-
-	dpll_gmac_m2_ck: dpll_gmac_m2_ck@2b8 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gmac_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x02b8>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	video2_dclk_div: video2_dclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&video2_m2_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	video1_dclk_div: video1_dclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&video1_m2_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	hdmi_dclk_div: hdmi_dclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&hdmi_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	per_dpll_hs_clk_div: per_dpll_hs_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_abe_m3x2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	usb_dpll_hs_clk_div: usb_dpll_hs_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_abe_m3x2_ck>;
-		clock-mult = <1>;
-		clock-div = <3>;
-	};
-
-	eve_dpll_hs_clk_div: eve_dpll_hs_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_h12x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_eve_byp_mux: dpll_eve_byp_mux@290 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>;
-		ti,bit-shift = <23>;
-		reg = <0x0290>;
-	};
-
-	dpll_eve_ck: dpll_eve_ck@284 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&dpll_eve_byp_mux>;
-		reg = <0x0284>, <0x0288>, <0x0290>, <0x028c>;
-	};
-
-	dpll_eve_m2_ck: dpll_eve_m2_ck@294 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_eve_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0294>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	eve_dclk_div: eve_dclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_eve_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_core_h13x2_ck: dpll_core_h13x2_ck@140 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0140>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_core_h14x2_ck: dpll_core_h14x2_ck@144 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0144>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_core_h22x2_ck: dpll_core_h22x2_ck@154 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0154>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_core_h23x2_ck: dpll_core_h23x2_ck@158 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0158>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_core_h24x2_ck: dpll_core_h24x2_ck@15c {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x015c>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_ddr_x2_ck: dpll_ddr_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clocks = <&dpll_ddr_ck>;
-	};
-
-	dpll_ddr_h11x2_ck: dpll_ddr_h11x2_ck@228 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_ddr_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0228>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_dsp_x2_ck: dpll_dsp_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clocks = <&dpll_dsp_ck>;
-	};
-
-	dpll_dsp_m3x2_ck: dpll_dsp_m3x2_ck@248 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_dsp_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0248>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-		assigned-clocks = <&dpll_dsp_m3x2_ck>;
-		assigned-clock-rates = <400000000>;
-	};
-
-	dpll_gmac_x2_ck: dpll_gmac_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clocks = <&dpll_gmac_ck>;
-	};
-
-	dpll_gmac_h11x2_ck: dpll_gmac_h11x2_ck@2c0 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gmac_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x02c0>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_gmac_h12x2_ck: dpll_gmac_h12x2_ck@2c4 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gmac_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x02c4>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_gmac_h13x2_ck: dpll_gmac_h13x2_ck@2c8 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gmac_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x02c8>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_gmac_m3x2_ck: dpll_gmac_m3x2_ck@2bc {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gmac_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x02bc>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	gmii_m_clk_div: gmii_m_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_gmac_h11x2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	hdmi_clk2_div: hdmi_clk2_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&hdmi_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	hdmi_div_clk: hdmi_div_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&hdmi_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l3_iclk_div: l3_iclk_div@100 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		ti,max-div = <2>;
-		ti,bit-shift = <4>;
-		reg = <0x0100>;
-		clocks = <&dpll_core_h12x2_ck>;
-		ti,index-power-of-two;
-	};
-
-	l4_root_clk_div: l4_root_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&l3_iclk_div>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	video1_clk2_div: video1_clk2_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&video1_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	video1_div_clk: video1_div_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&video1_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	video2_clk2_div: video2_clk2_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&video2_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	video2_div_clk: video2_div_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&video2_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dummy_ck: dummy_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-};
-&prm_clocks {
-	sys_clkin1: sys_clkin1@110 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&virt_12000000_ck>, <&virt_20000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
-		reg = <0x0110>;
-		ti,index-starts-at-one;
-	};
-
-	abe_dpll_sys_clk_mux: abe_dpll_sys_clk_mux@118 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&sys_clkin2>;
-		reg = <0x0118>;
-	};
-
-	abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux@114 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>;
-		reg = <0x0114>;
-	};
-
-	abe_dpll_clk_mux: abe_dpll_clk_mux@10c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>;
-		reg = <0x010c>;
-	};
-
-	abe_24m_fclk: abe_24m_fclk@11c {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_m2x2_ck>;
-		reg = <0x011c>;
-		ti,dividers = <8>, <16>;
-	};
-
-	aess_fclk: aess_fclk@178 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&abe_clk>;
-		reg = <0x0178>;
-		ti,max-div = <2>;
-	};
-
-	abe_giclk_div: abe_giclk_div@174 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&aess_fclk>;
-		reg = <0x0174>;
-		ti,max-div = <2>;
-	};
-
-	abe_lp_clk_div: abe_lp_clk_div@1d8 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_m2x2_ck>;
-		reg = <0x01d8>;
-		ti,dividers = <16>, <32>;
-	};
-
-	abe_sys_clk_div: abe_sys_clk_div@120 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sys_clkin1>;
-		reg = <0x0120>;
-		ti,max-div = <2>;
-	};
-
-	adc_gfclk_mux: adc_gfclk_mux@1dc {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&sys_clkin2>, <&sys_32k_ck>;
-		reg = <0x01dc>;
-	};
-
-	sys_clk1_dclk_div: sys_clk1_dclk_div@1c8 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sys_clkin1>;
-		ti,max-div = <64>;
-		reg = <0x01c8>;
-		ti,index-power-of-two;
-	};
-
-	sys_clk2_dclk_div: sys_clk2_dclk_div@1cc {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sys_clkin2>;
-		ti,max-div = <64>;
-		reg = <0x01cc>;
-		ti,index-power-of-two;
-	};
-
-	per_abe_x1_dclk_div: per_abe_x1_dclk_div@1bc {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x01bc>;
-		ti,index-power-of-two;
-	};
-
-	dsp_gclk_div: dsp_gclk_div@18c {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_dsp_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x018c>;
-		ti,index-power-of-two;
-	};
-
-	gpu_dclk: gpu_dclk@1a0 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gpu_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x01a0>;
-		ti,index-power-of-two;
-	};
-
-	emif_phy_dclk_div: emif_phy_dclk_div@190 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_ddr_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x0190>;
-		ti,index-power-of-two;
-	};
-
-	gmac_250m_dclk_div: gmac_250m_dclk_div@19c {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gmac_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x019c>;
-		ti,index-power-of-two;
-	};
-
-	gmac_main_clk: gmac_main_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&gmac_250m_dclk_div>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	l3init_480m_dclk_div: l3init_480m_dclk_div@1ac {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_usb_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x01ac>;
-		ti,index-power-of-two;
-	};
-
-	usb_otg_dclk_div: usb_otg_dclk_div@184 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&usb_otg_clkin_ck>;
-		ti,max-div = <64>;
-		reg = <0x0184>;
-		ti,index-power-of-two;
-	};
-
-	sata_dclk_div: sata_dclk_div@1c0 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sys_clkin1>;
-		ti,max-div = <64>;
-		reg = <0x01c0>;
-		ti,index-power-of-two;
-	};
-
-	pcie2_dclk_div: pcie2_dclk_div@1b8 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_pcie_ref_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x01b8>;
-		ti,index-power-of-two;
-	};
-
-	pcie_dclk_div: pcie_dclk_div@1b4 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&apll_pcie_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x01b4>;
-		ti,index-power-of-two;
-	};
-
-	emu_dclk_div: emu_dclk_div@194 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sys_clkin1>;
-		ti,max-div = <64>;
-		reg = <0x0194>;
-		ti,index-power-of-two;
-	};
-
-	secure_32k_dclk_div: secure_32k_dclk_div@1c4 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&secure_32k_clk_src_ck>;
-		ti,max-div = <64>;
-		reg = <0x01c4>;
-		ti,index-power-of-two;
-	};
-
-	clkoutmux0_clk_mux: clkoutmux0_clk_mux@158 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
-		reg = <0x0158>;
-	};
-
-	clkoutmux1_clk_mux: clkoutmux1_clk_mux@15c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
-		reg = <0x015c>;
-	};
-
-	clkoutmux2_clk_mux: clkoutmux2_clk_mux@160 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
-		reg = <0x0160>;
-	};
-
-	custefuse_sys_gfclk_div: custefuse_sys_gfclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin1>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	eve_clk: eve_clk@180 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_eve_m2_ck>, <&dpll_dsp_m3x2_ck>;
-		reg = <0x0180>;
-	};
-
-	hdmi_dpll_clk_mux: hdmi_dpll_clk_mux@164 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&sys_clkin2>;
-		reg = <0x0164>;
-	};
-
-	mlb_clk: mlb_clk@134 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&mlb_clkin_ck>;
-		ti,max-div = <64>;
-		reg = <0x0134>;
-		ti,index-power-of-two;
-	};
-
-	mlbp_clk: mlbp_clk@130 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&mlbp_clkin_ck>;
-		ti,max-div = <64>;
-		reg = <0x0130>;
-		ti,index-power-of-two;
-	};
-
-	per_abe_x1_gfclk2_div: per_abe_x1_gfclk2_div@138 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x0138>;
-		ti,index-power-of-two;
-	};
-
-	timer_sys_clk_div: timer_sys_clk_div@144 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sys_clkin1>;
-		reg = <0x0144>;
-		ti,max-div = <2>;
-	};
-
-	video1_dpll_clk_mux: video1_dpll_clk_mux@168 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&sys_clkin2>;
-		reg = <0x0168>;
-	};
-
-	video2_dpll_clk_mux: video2_dpll_clk_mux@16c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&sys_clkin2>;
-		reg = <0x016c>;
-	};
-
-	wkupaon_iclk_mux: wkupaon_iclk_mux@108 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&abe_lp_clk_div>;
-		reg = <0x0108>;
-	};
-};
-
-&cm_core_clocks {
-	dpll_pcie_ref_ck: dpll_pcie_ref_ck@200 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&sys_clkin1>;
-		reg = <0x0200>, <0x0204>, <0x020c>, <0x0208>;
-	};
-
-	dpll_pcie_ref_m2ldo_ck: dpll_pcie_ref_m2ldo_ck@210 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_pcie_ref_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0210>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	apll_pcie_in_clk_mux: apll_pcie_in_clk_mux@4ae06118 {
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_pcie_ref_m2ldo_ck>, <&pciesref_acs_clk_ck>;
-		#clock-cells = <0>;
-		reg = <0x021c 0x4>;
-		ti,bit-shift = <7>;
-	};
-
-	apll_pcie_ck: apll_pcie_ck@21c {
-		#clock-cells = <0>;
-		compatible = "ti,dra7-apll-clock";
-		clocks = <&apll_pcie_in_clk_mux>, <&dpll_pcie_ref_ck>;
-		reg = <0x021c>, <0x0220>;
-	};
-
-	optfclk_pciephy_div: optfclk_pciephy_div@4a00821c {
-		compatible = "ti,divider-clock";
-		clocks = <&apll_pcie_ck>;
-		#clock-cells = <0>;
-		reg = <0x021c>;
-		ti,dividers = <2>, <1>;
-		ti,bit-shift = <8>;
-		ti,max-div = <2>;
-	};
-
-	apll_pcie_clkvcoldo: apll_pcie_clkvcoldo {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&apll_pcie_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	apll_pcie_clkvcoldo_div: apll_pcie_clkvcoldo_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&apll_pcie_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	apll_pcie_m2_ck: apll_pcie_m2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&apll_pcie_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_per_byp_mux: dpll_per_byp_mux@14c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>;
-		ti,bit-shift = <23>;
-		reg = <0x014c>;
-	};
-
-	dpll_per_ck: dpll_per_ck@140 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&dpll_per_byp_mux>;
-		reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
-	};
-
-	dpll_per_m2_ck: dpll_per_m2_ck@150 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0150>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	func_96m_aon_dclk_div: func_96m_aon_dclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_usb_byp_mux: dpll_usb_byp_mux@18c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>;
-		ti,bit-shift = <23>;
-		reg = <0x018c>;
-	};
-
-	dpll_usb_ck: dpll_usb_ck@180 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-j-type-clock";
-		clocks = <&sys_clkin1>, <&dpll_usb_byp_mux>;
-		reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
-	};
-
-	dpll_usb_m2_ck: dpll_usb_m2_ck@190 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_usb_ck>;
-		ti,max-div = <127>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0190>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_pcie_ref_m2_ck: dpll_pcie_ref_m2_ck@210 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_pcie_ref_ck>;
-		ti,max-div = <127>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0210>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_x2_ck: dpll_per_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clocks = <&dpll_per_ck>;
-	};
-
-	dpll_per_h11x2_ck: dpll_per_h11x2_ck@158 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0158>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_h12x2_ck: dpll_per_h12x2_ck@15c {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x015c>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_h13x2_ck: dpll_per_h13x2_ck@160 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0160>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_h14x2_ck: dpll_per_h14x2_ck@164 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0164>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_m2x2_ck: dpll_per_m2x2_ck@150 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0150>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_usb_clkdcoldo: dpll_usb_clkdcoldo {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_usb_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	func_128m_clk: func_128m_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_h11x2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	func_12m_fclk: func_12m_fclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <16>;
-	};
-
-	func_24m_clk: func_24m_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	func_48m_fclk: func_48m_fclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	func_96m_fclk: func_96m_fclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	l3init_60m_fclk: l3init_60m_fclk@104 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_usb_m2_ck>;
-		reg = <0x0104>;
-		ti,dividers = <1>, <8>;
-	};
-
-	clkout2_clk: clkout2_clk@6b0 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkoutmux2_clk_mux>;
-		ti,bit-shift = <8>;
-		reg = <0x06b0>;
-	};
-
-	l3init_960m_gfclk: l3init_960m_gfclk@6c0 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_usb_clkdcoldo>;
-		ti,bit-shift = <8>;
-		reg = <0x06c0>;
-	};
-
-	usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k@640 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0640>;
-	};
-
-	usb_phy2_always_on_clk32k: usb_phy2_always_on_clk32k@688 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0688>;
-	};
-
-	usb_phy3_always_on_clk32k: usb_phy3_always_on_clk32k@698 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0698>;
-	};
-
-	gpu_core_gclk_mux: gpu_core_gclk_mux@1220 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1220>;
-		assigned-clocks = <&gpu_core_gclk_mux>;
-		assigned-clock-parents = <&dpll_gpu_m2_ck>;
-	};
-
-	gpu_hyd_gclk_mux: gpu_hyd_gclk_mux@1220 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>;
-		ti,bit-shift = <26>;
-		reg = <0x1220>;
-		assigned-clocks = <&gpu_hyd_gclk_mux>;
-		assigned-clock-parents = <&dpll_gpu_m2_ck>;
-	};
-
-	l3instr_ts_gclk_div: l3instr_ts_gclk_div@e50 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&wkupaon_iclk_mux>;
-		ti,bit-shift = <24>;
-		reg = <0x0e50>;
-		ti,dividers = <8>, <16>, <32>;
-	};
-
-	vip1_gclk_mux: vip1_gclk_mux@1020 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1020>;
-	};
-
-	vip2_gclk_mux: vip2_gclk_mux@1028 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1028>;
-	};
-
-	vip3_gclk_mux: vip3_gclk_mux@1030 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1030>;
-	};
-};
-
-&cm_core_clockdomains {
-	coreaon_clkdm: coreaon_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dpll_usb_ck>;
-	};
-};
-
-&scm_conf_clocks {
-	dss_deshdcp_clk: dss_deshdcp_clk@558 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l3_iclk_div>;
-		ti,bit-shift = <0>;
-		reg = <0x558>;
-	};
-
-       ehrpwm0_tbclk: ehrpwm0_tbclk@558 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4_root_clk_div>;
-		ti,bit-shift = <20>;
-		reg = <0x0558>;
-	};
-
-	ehrpwm1_tbclk: ehrpwm1_tbclk@558 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4_root_clk_div>;
-		ti,bit-shift = <21>;
-		reg = <0x0558>;
-	};
-
-	ehrpwm2_tbclk: ehrpwm2_tbclk@558 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4_root_clk_div>;
-		ti,bit-shift = <22>;
-		reg = <0x0558>;
-	};
-
-	sys_32k_ck: sys_32k_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clk32_crystal_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x6c4>;
-	};
-};
-
-&cm_core_aon {
-	mpu_cm: mpu-cm@300 {
-		compatible = "ti,omap4-cm";
-		reg = <0x300 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x300 0x100>;
-
-		mpu_clkctrl: mpu-clkctrl@20 {
-			compatible = "ti,clkctrl";
-			reg = <0x20 0x4>;
-			#clock-cells = <2>;
-		};
-
-	};
-
-	dsp1_cm: dsp1-cm@400 {
-		compatible = "ti,omap4-cm";
-		reg = <0x400 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x400 0x100>;
-
-		dsp1_clkctrl: dsp1-clkctrl@20 {
-			compatible = "ti,clkctrl";
-			reg = <0x20 0x4>;
-			#clock-cells = <2>;
-		};
-
-	};
-
-	ipu_cm: ipu-cm@500 {
-		compatible = "ti,omap4-cm";
-		reg = <0x500 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x500 0x100>;
-
-		ipu1_clkctrl: ipu1-clkctrl@20 {
-			compatible = "ti,clkctrl";
-			reg = <0x20 0x4>;
-			#clock-cells = <2>;
-			assigned-clocks = <&ipu1_clkctrl DRA7_IPU1_MMU_IPU1_CLKCTRL 24>;
-			assigned-clock-parents = <&dpll_core_h22x2_ck>;
-		};
-
-		ipu_clkctrl: ipu-clkctrl@50 {
-			compatible = "ti,clkctrl";
-			reg = <0x50 0x34>;
-			#clock-cells = <2>;
-		};
-
-	};
-
-	dsp2_cm: dsp2-cm@600 {
-		compatible = "ti,omap4-cm";
-		reg = <0x600 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x600 0x100>;
-
-		dsp2_clkctrl: dsp2-clkctrl@20 {
-			compatible = "ti,clkctrl";
-			reg = <0x20 0x4>;
-			#clock-cells = <2>;
-		};
-
-	};
-
-	rtc_cm: rtc-cm@700 {
-		compatible = "ti,omap4-cm";
-		reg = <0x700 0x60>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x700 0x60>;
-
-		rtc_clkctrl: rtc-clkctrl@20 {
-			compatible = "ti,clkctrl";
-			reg = <0x20 0x28>;
-			#clock-cells = <2>;
-		};
-	};
-
-	vpe_cm: vpe-cm@760 {
-		compatible = "ti,omap4-cm";
-		reg = <0x760 0xc>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x760 0xc>;
-
-		vpe_clkctrl: vpe-clkctrl@0 {
-			compatible = "ti,clkctrl";
-			reg = <0x0 0xc>;
-			#clock-cells = <2>;
-		};
-	};
-
-};
-
-&cm_core {
-	coreaon_cm: coreaon-cm@600 {
-		compatible = "ti,omap4-cm";
-		reg = <0x600 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x600 0x100>;
-
-		coreaon_clkctrl: coreaon-clkctrl@20 {
-			compatible = "ti,clkctrl";
-			reg = <0x20 0x1c>;
-			#clock-cells = <2>;
-		};
-	};
-
-	l3main1_cm: l3main1-cm@700 {
-		compatible = "ti,omap4-cm";
-		reg = <0x700 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x700 0x100>;
-
-		l3main1_clkctrl: l3main1-clkctrl@20 {
-			compatible = "ti,clkctrl";
-			reg = <0x20 0x74>;
-			#clock-cells = <2>;
-		};
-
-	};
-
-	ipu2_cm: ipu2-cm@900 {
-		compatible = "ti,omap4-cm";
-		reg = <0x900 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x900 0x100>;
-
-		ipu2_clkctrl: ipu2-clkctrl@20 {
-			compatible = "ti,clkctrl";
-			reg = <0x20 0x4>;
-			#clock-cells = <2>;
-		};
-
-	};
-
-	dma_cm: dma-cm@a00 {
-		compatible = "ti,omap4-cm";
-		reg = <0xa00 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xa00 0x100>;
-
-		dma_clkctrl: dma-clkctrl@20 {
-			compatible = "ti,clkctrl";
-			reg = <0x20 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-
-	emif_cm: emif-cm@b00 {
-		compatible = "ti,omap4-cm";
-		reg = <0xb00 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xb00 0x100>;
-
-		emif_clkctrl: emif-clkctrl@20 {
-			compatible = "ti,clkctrl";
-			reg = <0x20 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-
-	atl_cm: atl-cm@c00 {
-		compatible = "ti,omap4-cm";
-		reg = <0xc00 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xc00 0x100>;
-
-		atl_clkctrl: atl-clkctrl@0 {
-			compatible = "ti,clkctrl";
-			reg = <0x0 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-
-	l4cfg_cm: l4cfg-cm@d00 {
-		compatible = "ti,omap4-cm";
-		reg = <0xd00 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xd00 0x100>;
-
-		l4cfg_clkctrl: l4cfg-clkctrl@20 {
-			compatible = "ti,clkctrl";
-			reg = <0x20 0x84>;
-			#clock-cells = <2>;
-		};
-	};
-
-	l3instr_cm: l3instr-cm@e00 {
-		compatible = "ti,omap4-cm";
-		reg = <0xe00 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xe00 0x100>;
-
-		l3instr_clkctrl: l3instr-clkctrl@20 {
-			compatible = "ti,clkctrl";
-			reg = <0x20 0xc>;
-			#clock-cells = <2>;
-		};
-	};
-
-	iva_cm: iva-cm@f00 {
-		compatible = "ti,omap4-cm";
-		reg = <0xf00 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xf00 0x100>;
-
-		iva_clkctrl: iva-clkctrl@20 {
-			compatible = "ti,clkctrl";
-			reg = <0x20 0xc>;
-			#clock-cells = <2>;
-		};
-	};
-
-	cam_cm: cam-cm@1000 {
-		compatible = "ti,omap4-cm";
-		reg = <0x1000 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x1000 0x100>;
-
-		cam_clkctrl: cam-clkctrl@20 {
-			compatible = "ti,clkctrl";
-			reg = <0x20 0x2c>;
-			#clock-cells = <2>;
-		};
-	};
-
-	dss_cm: dss-cm@1100 {
-		compatible = "ti,omap4-cm";
-		reg = <0x1100 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x1100 0x100>;
-
-		dss_clkctrl: dss-clkctrl@20 {
-			compatible = "ti,clkctrl";
-			reg = <0x20 0x14>;
-			#clock-cells = <2>;
-		};
-	};
-
-	gpu_cm: gpu-cm@1200 {
-		compatible = "ti,omap4-cm";
-		reg = <0x1200 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x1200 0x100>;
-
-		gpu_clkctrl: gpu-clkctrl@20 {
-			compatible = "ti,clkctrl";
-			reg = <0x20 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-
-	l3init_cm: l3init-cm@1300 {
-		compatible = "ti,omap4-cm";
-		reg = <0x1300 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x1300 0x100>;
-
-		l3init_clkctrl: l3init-clkctrl@20 {
-			compatible = "ti,clkctrl";
-			reg = <0x20 0x6c>, <0xe0 0x14>;
-			#clock-cells = <2>;
-		};
-
-		pcie_clkctrl: pcie-clkctrl@b0 {
-			compatible = "ti,clkctrl";
-			reg = <0xb0 0xc>;
-			#clock-cells = <2>;
-		};
-
-		gmac_clkctrl: gmac-clkctrl@d0 {
-			compatible = "ti,clkctrl";
-			reg = <0xd0 0x4>;
-			#clock-cells = <2>;
-		};
-
-	};
-
-	l4per_cm: l4per-cm@1700 {
-		compatible = "ti,omap4-cm";
-		reg = <0x1700 0x300>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x1700 0x300>;
-
-		l4per_clkctrl: l4per-clkctrl@28 {
-			compatible = "ti,clkctrl";
-			reg = <0x28 0x64>, <0xa0 0x24>, <0xf0 0x3c>, <0x140 0x1c>, <0x170 0x4>;
-			#clock-cells = <2>;
-
-			assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
-			assigned-clock-parents = <&abe_24m_fclk>;
-		};
-
-		l4sec_clkctrl: l4sec-clkctrl@1a0 {
-			compatible = "ti,clkctrl";
-			reg = <0x1a0 0x2c>;
-			#clock-cells = <2>;
-		};
-
-		l4per2_clkctrl: l4per2-clkctrl@c {
-			compatible = "ti,clkctrl";
-			reg = <0xc 0x4>, <0x18 0xc>, <0x90 0xc>, <0xc4 0x4>, <0x138 0x4>, <0x160 0xc>, <0x178 0x24>, <0x1d0 0x3c>;
-			#clock-cells = <2>;
-		};
-
-		l4per3_clkctrl: l4per3-clkctrl@14 {
-			compatible = "ti,clkctrl";
-			reg = <0x14 0x4>, <0xc8 0x14>, <0x130 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-
-};
-
-&prm {
-	wkupaon_cm: wkupaon-cm@1800 {
-		compatible = "ti,omap4-cm";
-		reg = <0x1800 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x1800 0x100>;
-
-		wkupaon_clkctrl: wkupaon-clkctrl@20 {
-			compatible = "ti,clkctrl";
-			reg = <0x20 0x6c>;
-			#clock-cells = <2>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/exynos4412-pinctrl.dtsi b/arch/arm/boot/dts/exynos4412-pinctrl.dtsi
deleted file mode 100644
index d7d5fdc230d8..000000000000
--- a/arch/arm/boot/dts/exynos4412-pinctrl.dtsi
+++ /dev/null
@@ -1,979 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos4412 SoCs pin-mux and pin-config device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung's Exynos4412 SoCs pin-mux and pin-config optiosn are listed as device
- * tree nodes are listed in this file.
- */
-
-#include <dt-bindings/pinctrl/samsung.h>
-
-#define PIN_SLP(_pin, _mode, _pull)					\
-	_pin {								\
-		samsung,pins = #_pin;					\
-		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_ ##_mode>;	\
-		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_ ##_pull>;	\
-	}
-
-&pinctrl_0 {
-	gpa0: gpa0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpa1: gpa1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpb: gpb {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc0: gpc0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc1: gpc1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpd0: gpd0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpd1: gpd1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpf0: gpf0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpf1: gpf1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpf2: gpf2 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpf3: gpf3 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpj0: gpj0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpj1: gpj1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	uart0_data: uart0-data {
-		samsung,pins = "gpa0-0", "gpa0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart0_fctl: uart0-fctl {
-		samsung,pins = "gpa0-2", "gpa0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart1_data: uart1-data {
-		samsung,pins = "gpa0-4", "gpa0-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart1_fctl: uart1-fctl {
-		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c2_bus: i2c2-bus {
-		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart2_data: uart2-data {
-		samsung,pins = "gpa1-0", "gpa1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart2_fctl: uart2-fctl {
-		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart_audio_a: uart-audio-a {
-		samsung,pins = "gpa1-0", "gpa1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c3_bus: i2c3-bus {
-		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart3_data: uart3-data {
-		samsung,pins = "gpa1-4", "gpa1-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart_audio_b: uart-audio-b {
-		samsung,pins = "gpa1-4", "gpa1-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	spi0_bus: spi0-bus {
-		samsung,pins = "gpb-0", "gpb-2", "gpb-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c4_bus: i2c4-bus {
-		samsung,pins = "gpb-0", "gpb-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	spi1_bus: spi1-bus {
-		samsung,pins = "gpb-4", "gpb-6", "gpb-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c5_bus: i2c5-bus {
-		samsung,pins = "gpb-2", "gpb-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2s1_bus: i2s1-bus {
-		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
-				"gpc0-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pcm1_bus: pcm1-bus {
-		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
-				"gpc0-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	ac97_bus: ac97-bus {
-		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
-				"gpc0-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2s2_bus: i2s2-bus {
-		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
-				"gpc1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pcm2_bus: pcm2-bus {
-		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
-				"gpc1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	spdif_bus: spdif-bus {
-		samsung,pins = "gpc1-0", "gpc1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c6_bus: i2c6-bus {
-		samsung,pins = "gpc1-3", "gpc1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	spi2_bus: spi2-bus {
-		samsung,pins = "gpc1-1", "gpc1-3", "gpc1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pwm0_out: pwm0-out {
-		samsung,pins = "gpd0-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pwm1_out: pwm1-out {
-		samsung,pins = "gpd0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	lcd_ctrl: lcd-ctrl {
-		samsung,pins = "gpd0-0", "gpd0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c7_bus: i2c7-bus {
-		samsung,pins = "gpd0-2", "gpd0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pwm2_out: pwm2-out {
-		samsung,pins = "gpd0-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pwm3_out: pwm3-out {
-		samsung,pins = "gpd0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c0_bus: i2c0-bus {
-		samsung,pins = "gpd1-0", "gpd1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	mipi0_clk: mipi0-clk {
-		samsung,pins = "gpd1-0", "gpd1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c1_bus: i2c1-bus {
-		samsung,pins = "gpd1-2", "gpd1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	mipi1_clk: mipi1-clk {
-		samsung,pins = "gpd1-2", "gpd1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	lcd_clk: lcd-clk {
-		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	lcd_data16: lcd-data-width16 {
-		samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", "gpf1-2",
-				"gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0",
-				"gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7",
-				"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	lcd_data18: lcd-data-width18 {
-		samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", "gpf1-1",
-				"gpf1-2", "gpf1-3", "gpf1-6", "gpf1-7",
-				"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
-				"gpf2-6", "gpf2-7", "gpf3-0", "gpf3-1",
-				"gpf3-2", "gpf3-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	lcd_data24: lcd-data-width24 {
-		samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
-				"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
-				"gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
-				"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
-				"gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
-				"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	lcd_ldi: lcd-ldi {
-		samsung,pins = "gpf3-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	cam_port_a_io: cam-port-a-io {
-		samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
-				"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
-				"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	cam_port_a_clk_active: cam-port-a-clk-active {
-		samsung,pins = "gpj1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	cam_port_a_clk_idle: cam-port-a-clk-idle {
-		samsung,pins = "gpj1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-};
-
-&pinctrl_1 {
-	gpk0: gpk0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpk1: gpk1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpk2: gpk2 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpk3: gpk3 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpl0: gpl0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpl1: gpl1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpl2: gpl2 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpm0: gpm0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpm1: gpm1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpm2: gpm2 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpm3: gpm3 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpm4: gpm4 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpy0: gpy0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy1: gpy1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy2: gpy2 {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy3: gpy3 {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy4: gpy4 {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy5: gpy5 {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy6: gpy6 {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpx0: gpx0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-		#interrupt-cells = <2>;
-	};
-
-	gpx1: gpx1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-		#interrupt-cells = <2>;
-	};
-
-	gpx2: gpx2 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpx3: gpx3 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	sd0_clk: sd0-clk {
-		samsung,pins = "gpk0-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd0_cmd: sd0-cmd {
-		samsung,pins = "gpk0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd0_cd: sd0-cd {
-		samsung,pins = "gpk0-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd0_bus1: sd0-bus-width1 {
-		samsung,pins = "gpk0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd0_bus4: sd0-bus-width4 {
-		samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd0_bus8: sd0-bus-width8 {
-		samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd4_clk: sd4-clk {
-		samsung,pins = "gpk0-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd4_cmd: sd4-cmd {
-		samsung,pins = "gpk0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd4_cd: sd4-cd {
-		samsung,pins = "gpk0-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd4_bus1: sd4-bus-width1 {
-		samsung,pins = "gpk0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd4_bus4: sd4-bus-width4 {
-		samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd4_bus8: sd4-bus-width8 {
-		samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd1_clk: sd1-clk {
-		samsung,pins = "gpk1-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd1_cmd: sd1-cmd {
-		samsung,pins = "gpk1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd1_cd: sd1-cd {
-		samsung,pins = "gpk1-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd1_bus1: sd1-bus-width1 {
-		samsung,pins = "gpk1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd1_bus4: sd1-bus-width4 {
-		samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd2_clk: sd2-clk {
-		samsung,pins = "gpk2-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd2_cmd: sd2-cmd {
-		samsung,pins = "gpk2-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd2_cd: sd2-cd {
-		samsung,pins = "gpk2-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd2_bus1: sd2-bus-width1 {
-		samsung,pins = "gpk2-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd2_bus4: sd2-bus-width4 {
-		samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd2_bus8: sd2-bus-width8 {
-		samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd3_clk: sd3-clk {
-		samsung,pins = "gpk3-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd3_cmd: sd3-cmd {
-		samsung,pins = "gpk3-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd3_cd: sd3-cd {
-		samsung,pins = "gpk3-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd3_bus1: sd3-bus-width1 {
-		samsung,pins = "gpk3-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd3_bus4: sd3-bus-width4 {
-		samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	cam_port_b_io: cam-port-b-io {
-		samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
-				"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
-				"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	cam_port_b_clk_active: cam-port-b-clk-active {
-		samsung,pins = "gpm2-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	cam_port_b_clk_idle: cam-port-b-clk-idle {
-		samsung,pins = "gpm2-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	eint0: ext-int0 {
-		samsung,pins = "gpx0-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	eint8: ext-int8 {
-		samsung,pins = "gpx1-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	eint15: ext-int15 {
-		samsung,pins = "gpx1-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	eint16: ext-int16 {
-		samsung,pins = "gpx2-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	eint31: ext-int31 {
-		samsung,pins = "gpx3-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	fimc_is_i2c0: fimc-is-i2c0 {
-		samsung,pins = "gpm4-0", "gpm4-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	fimc_is_i2c1: fimc-is-i2c1 {
-		samsung,pins = "gpm4-2", "gpm4-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	fimc_is_uart: fimc-is-uart {
-		samsung,pins = "gpm3-5", "gpm3-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	hdmi_cec: hdmi-cec {
-		samsung,pins = "gpx3-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-};
-
-&pinctrl_2 {
-	gpz: gpz {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	i2s0_bus: i2s0-bus {
-		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
-				"gpz-4", "gpz-5", "gpz-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pcm0_bus: pcm0-bus {
-		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
-				"gpz-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-};
-
-&pinctrl_3 {
-	gpv0: gpv0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpv1: gpv1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpv2: gpv2 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpv3: gpv3 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpv4: gpv4 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	c2c_bus: c2c-bus {
-		samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3",
-				"gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7",
-				"gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3",
-				"gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7",
-				"gpv2-0", "gpv2-1", "gpv2-2", "gpv2-3",
-				"gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7",
-				"gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3",
-				"gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7",
-				"gpv4-0", "gpv4-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-};
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
deleted file mode 100644
index d3802046c8b8..000000000000
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ /dev/null
@@ -1,821 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos4412 SoC device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung's Exynos4412 SoC device nodes are listed in this file. Exynos4412
- * based board files can include this file and provide values for board specfic
- * bindings.
- *
- * Note: This file does not include device nodes for all the controllers in
- * Exynos4412 SoC. As device tree coverage for Exynos4412 increases, additional
- * nodes can be added to this file.
- */
-
-#include "exynos4.dtsi"
-
-#include "exynos4-cpu-thermal.dtsi"
-
-/ {
-	compatible = "samsung,exynos4412", "samsung,exynos4";
-
-	aliases {
-		pinctrl0 = &pinctrl_0;
-		pinctrl1 = &pinctrl_1;
-		pinctrl2 = &pinctrl_2;
-		pinctrl3 = &pinctrl_3;
-		fimc-lite0 = &fimc_lite_0;
-		fimc-lite1 = &fimc_lite_1;
-		mshc0 = &mshc_0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu-map {
-			cluster0 {
-				core0 {
-					cpu = <&cpu0>;
-				};
-				core1 {
-					cpu = <&cpu1>;
-				};
-				core2 {
-					cpu = <&cpu2>;
-				};
-				core3 {
-					cpu = <&cpu3>;
-				};
-			};
-		};
-
-		cpu0: cpu@a00 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0xA00>;
-			clocks = <&clock CLK_ARM_CLK>;
-			clock-names = "cpu";
-			operating-points-v2 = <&cpu0_opp_table>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-
-		cpu1: cpu@a01 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0xA01>;
-			clocks = <&clock CLK_ARM_CLK>;
-			clock-names = "cpu";
-			operating-points-v2 = <&cpu0_opp_table>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-
-		cpu2: cpu@a02 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0xA02>;
-			clocks = <&clock CLK_ARM_CLK>;
-			clock-names = "cpu";
-			operating-points-v2 = <&cpu0_opp_table>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-
-		cpu3: cpu@a03 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0xA03>;
-			clocks = <&clock CLK_ARM_CLK>;
-			clock-names = "cpu";
-			operating-points-v2 = <&cpu0_opp_table>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-	};
-
-	cpu0_opp_table: opp-table0 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-200000000 {
-			opp-hz = /bits/ 64 <200000000>;
-			opp-microvolt = <900000>;
-			clock-latency-ns = <200000>;
-		};
-		opp-300000000 {
-			opp-hz = /bits/ 64 <300000000>;
-			opp-microvolt = <900000>;
-			clock-latency-ns = <200000>;
-		};
-		opp-400000000 {
-			opp-hz = /bits/ 64 <400000000>;
-			opp-microvolt = <925000>;
-			clock-latency-ns = <200000>;
-		};
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <950000>;
-			clock-latency-ns = <200000>;
-		};
-		opp-600000000 {
-			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <975000>;
-			clock-latency-ns = <200000>;
-		};
-		opp-700000000 {
-			opp-hz = /bits/ 64 <700000000>;
-			opp-microvolt = <987500>;
-			clock-latency-ns = <200000>;
-		};
-		opp-800000000 {
-			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = <1000000>;
-			clock-latency-ns = <200000>;
-			opp-suspend;
-		};
-		opp-900000000 {
-			opp-hz = /bits/ 64 <900000000>;
-			opp-microvolt = <1037500>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <1087500>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1100000000 {
-			opp-hz = /bits/ 64 <1100000000>;
-			opp-microvolt = <1137500>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1200000000 {
-			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <1187500>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1300000000 {
-			opp-hz = /bits/ 64 <1300000000>;
-			opp-microvolt = <1250000>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1400000000 {
-			opp-hz = /bits/ 64 <1400000000>;
-			opp-microvolt = <1287500>;
-			clock-latency-ns = <200000>;
-		};
-		cpu0_opp_1500: opp-1500000000 {
-			opp-hz = /bits/ 64 <1500000000>;
-			opp-microvolt = <1350000>;
-			clock-latency-ns = <200000>;
-			turbo-mode;
-		};
-	};
-
-
-	soc: soc {
-
-		pinctrl_0: pinctrl@11400000 {
-			compatible = "samsung,exynos4x12-pinctrl";
-			reg = <0x11400000 0x1000>;
-			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		pinctrl_1: pinctrl@11000000 {
-			compatible = "samsung,exynos4x12-pinctrl";
-			reg = <0x11000000 0x1000>;
-			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-
-			wakup_eint: wakeup-interrupt-controller {
-				compatible = "samsung,exynos4210-wakeup-eint";
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		pinctrl_2: pinctrl@3860000 {
-			compatible = "samsung,exynos4x12-pinctrl";
-			reg = <0x03860000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <10 0>;
-		};
-
-		pinctrl_3: pinctrl@106e0000 {
-			compatible = "samsung,exynos4x12-pinctrl";
-			reg = <0x106E0000 0x1000>;
-			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		sram@2020000 {
-			compatible = "mmio-sram";
-			reg = <0x02020000 0x40000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x02020000 0x40000>;
-
-			smp-sram@0 {
-				compatible = "samsung,exynos4210-sysram";
-				reg = <0x0 0x1000>;
-			};
-
-			smp-sram@2f000 {
-				compatible = "samsung,exynos4210-sysram-ns";
-				reg = <0x2f000 0x1000>;
-			};
-		};
-
-		pd_isp: power-domain@10023ca0 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023CA0 0x20>;
-			#power-domain-cells = <0>;
-			label = "ISP";
-		};
-
-		l2c: cache-controller@10502000 {
-			compatible = "arm,pl310-cache";
-			reg = <0x10502000 0x1000>;
-			cache-unified;
-			cache-level = <2>;
-			prefetch-data = <1>;
-			prefetch-instr = <1>;
-			arm,tag-latency = <2 2 1>;
-			arm,data-latency = <3 2 1>;
-			arm,double-linefill = <1>;
-			arm,double-linefill-incr = <0>;
-			arm,double-linefill-wrap = <1>;
-			arm,prefetch-drop = <1>;
-			arm,prefetch-offset = <7>;
-		};
-
-		clock: clock-controller@10030000 {
-			compatible = "samsung,exynos4412-clock";
-			reg = <0x10030000 0x18000>;
-			#clock-cells = <1>;
-		};
-
-		isp_clock: clock-controller@10048000 {
-			compatible = "samsung,exynos4412-isp-clock";
-			reg = <0x10048000 0x1000>;
-			#clock-cells = <1>;
-			power-domains = <&pd_isp>;
-			clocks = <&clock CLK_ACLK200>,
-				 <&clock CLK_ACLK400_MCUISP>;
-			clock-names = "aclk200", "aclk400_mcuisp";
-		};
-
-		timer@10050000 {
-			compatible = "samsung,exynos4412-mct";
-			reg = <0x10050000 0x800>;
-			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
-			clock-names = "fin_pll", "mct";
-			interrupts-extended = <&gic GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
-					      <&combiner 12 5>,
-					      <&combiner 12 6>,
-					      <&combiner 12 7>,
-					      <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		watchdog: watchdog@10060000 {
-			compatible = "samsung,exynos5250-wdt";
-			reg = <0x10060000 0x100>;
-			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_WDT>;
-			clock-names = "watchdog";
-			samsung,syscon-phandle = <&pmu_system_controller>;
-		};
-
-		adc: adc@126c0000 {
-			compatible = "samsung,exynos4212-adc";
-			reg = <0x126C0000 0x100>;
-			interrupt-parent = <&combiner>;
-			interrupts = <10 3>;
-			clocks = <&clock CLK_TSADC>;
-			clock-names = "adc";
-			#io-channel-cells = <1>;
-			samsung,syscon-phandle = <&pmu_system_controller>;
-			status = "disabled";
-		};
-
-		g2d: g2d@10800000 {
-			compatible = "samsung,exynos4212-g2d";
-			reg = <0x10800000 0x1000>;
-			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
-			clock-names = "sclk_fimg2d", "fimg2d";
-			iommus = <&sysmmu_g2d>;
-		};
-
-		mshc_0: mmc@12550000 {
-			compatible = "samsung,exynos4412-dw-mshc";
-			reg = <0x12550000 0x1000>;
-			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			fifo-depth = <0x80>;
-			clocks = <&clock CLK_SDMMC4>, <&clock CLK_SCLK_MMC4>;
-			clock-names = "biu", "ciu";
-			status = "disabled";
-		};
-
-		sysmmu_g2d: sysmmu@10a40000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x10A40000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <4 7>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_isp: sysmmu@12260000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x12260000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <16 2>;
-			power-domains = <&pd_isp>;
-			clock-names = "sysmmu";
-			clocks = <&isp_clock CLK_ISP_SMMU_ISP>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_drc: sysmmu@12270000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x12270000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <16 3>;
-			power-domains = <&pd_isp>;
-			clock-names = "sysmmu";
-			clocks = <&isp_clock CLK_ISP_SMMU_DRC>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_fd: sysmmu@122a0000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x122A0000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <16 4>;
-			power-domains = <&pd_isp>;
-			clock-names = "sysmmu";
-			clocks = <&isp_clock CLK_ISP_SMMU_FD>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_mcuctl: sysmmu@122b0000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x122B0000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <16 5>;
-			power-domains = <&pd_isp>;
-			clock-names = "sysmmu";
-			clocks = <&isp_clock CLK_ISP_SMMU_ISPCX>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_lite0: sysmmu@123b0000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x123B0000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <16 0>;
-			power-domains = <&pd_isp>;
-			clock-names = "sysmmu", "master";
-			clocks = <&isp_clock CLK_ISP_SMMU_LITE0>,
-				 <&isp_clock CLK_ISP_FIMC_LITE0>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_lite1: sysmmu@123c0000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x123C0000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <16 1>;
-			power-domains = <&pd_isp>;
-			clock-names = "sysmmu", "master";
-			clocks = <&isp_clock CLK_ISP_SMMU_LITE1>,
-				 <&isp_clock CLK_ISP_FIMC_LITE1>;
-			#iommu-cells = <0>;
-		};
-
-		bus_dmc: bus-dmc {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_DMC>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_dmc_opp_table>;
-			samsung,data-clock-ratio = <4>;
-			#interconnect-cells = <0>;
-			status = "disabled";
-		};
-
-		bus_acp: bus-acp {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_ACP>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_acp_opp_table>;
-			status = "disabled";
-		};
-
-		bus_c2c: bus-c2c {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_C2C>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_dmc_opp_table>;
-			status = "disabled";
-		};
-
-		bus_dmc_opp_table: opp-table1 {
-			compatible = "operating-points-v2";
-
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-				opp-microvolt = <900000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-				opp-microvolt = <900000>;
-			};
-			opp-160000000 {
-				opp-hz = /bits/ 64 <160000000>;
-				opp-microvolt = <900000>;
-			};
-			opp-267000000 {
-				opp-hz = /bits/ 64 <267000000>;
-				opp-microvolt = <950000>;
-			};
-			opp-400000000 {
-				opp-hz = /bits/ 64 <400000000>;
-				opp-microvolt = <1050000>;
-				opp-suspend;
-			};
-		};
-
-		bus_acp_opp_table: opp-table2 {
-			compatible = "operating-points-v2";
-
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-			};
-			opp-160000000 {
-				opp-hz = /bits/ 64 <160000000>;
-			};
-			opp-267000000 {
-				opp-hz = /bits/ 64 <267000000>;
-			};
-		};
-
-		bus_leftbus: bus-leftbus {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_GDL>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			interconnects = <&bus_dmc>;
-			#interconnect-cells = <0>;
-			status = "disabled";
-		};
-
-		bus_rightbus: bus-rightbus {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_GDR>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_display: bus-display {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_ACLK160>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_display_opp_table>;
-			interconnects = <&bus_leftbus &bus_dmc>;
-			#interconnect-cells = <0>;
-			status = "disabled";
-		};
-
-		bus_fsys: bus-fsys {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_ACLK133>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_fsys_opp_table>;
-			status = "disabled";
-		};
-
-		bus_peri: bus-peri {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_ACLK100>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_peri_opp_table>;
-			status = "disabled";
-		};
-
-		bus_mfc: bus-mfc {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_SCLK_MFC>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_leftbus_opp_table: opp-table3 {
-			compatible = "operating-points-v2";
-
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-				opp-microvolt = <900000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-				opp-microvolt = <925000>;
-			};
-			opp-160000000 {
-				opp-hz = /bits/ 64 <160000000>;
-				opp-microvolt = <950000>;
-			};
-			opp-200000000 {
-				opp-hz = /bits/ 64 <200000000>;
-				opp-microvolt = <1000000>;
-				opp-suspend;
-			};
-		};
-
-		bus_display_opp_table: opp-table4 {
-			compatible = "operating-points-v2";
-
-			opp-160000000 {
-				opp-hz = /bits/ 64 <160000000>;
-			};
-			opp-200000000 {
-				opp-hz = /bits/ 64 <200000000>;
-			};
-		};
-
-		bus_fsys_opp_table: opp-table5 {
-			compatible = "operating-points-v2";
-
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-			};
-		};
-
-		bus_peri_opp_table: opp-table6 {
-			compatible = "operating-points-v2";
-
-			opp-50000000 {
-				opp-hz = /bits/ 64 <50000000>;
-			};
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-		};
-	};
-};
-
-&combiner {
-	samsung,combiner-nr = <20>;
-	interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&camera {
-	clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
-		 <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
-	clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
-
-	/* fimc_[0-3] are configured outside, under phandles */
-	fimc_lite_0: fimc-lite@12390000 {
-		compatible = "samsung,exynos4212-fimc-lite";
-		reg = <0x12390000 0x1000>;
-		interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
-		power-domains = <&pd_isp>;
-		clocks = <&isp_clock CLK_ISP_FIMC_LITE0>;
-		clock-names = "flite";
-		iommus = <&sysmmu_fimc_lite0>;
-		status = "disabled";
-	};
-
-	fimc_lite_1: fimc-lite@123a0000 {
-		compatible = "samsung,exynos4212-fimc-lite";
-		reg = <0x123A0000 0x1000>;
-		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-		power-domains = <&pd_isp>;
-		clocks = <&isp_clock CLK_ISP_FIMC_LITE1>;
-		clock-names = "flite";
-		iommus = <&sysmmu_fimc_lite1>;
-		status = "disabled";
-	};
-
-	fimc_is: fimc-is@12000000 {
-		compatible = "samsung,exynos4212-fimc-is";
-		reg = <0x12000000 0x260000>;
-		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
-		power-domains = <&pd_isp>;
-		clocks = <&isp_clock CLK_ISP_FIMC_LITE0>,
-			 <&isp_clock CLK_ISP_FIMC_LITE1>,
-			 <&isp_clock CLK_ISP_PPMUISPX>,
-			 <&isp_clock CLK_ISP_PPMUISPMX>,
-			 <&isp_clock CLK_ISP_FIMC_ISP>,
-			 <&isp_clock CLK_ISP_FIMC_DRC>,
-			 <&isp_clock CLK_ISP_FIMC_FD>,
-			 <&isp_clock CLK_ISP_MCUISP>,
-			 <&isp_clock CLK_ISP_GICISP>,
-			 <&isp_clock CLK_ISP_MCUCTL_ISP>,
-			 <&isp_clock CLK_ISP_PWM_ISP>,
-			 <&isp_clock CLK_ISP_DIV_ISP0>,
-			 <&isp_clock CLK_ISP_DIV_ISP1>,
-			 <&isp_clock CLK_ISP_DIV_MCUISP0>,
-			 <&isp_clock CLK_ISP_DIV_MCUISP1>,
-			 <&clock CLK_MOUT_MPLL_USER_T>,
-			 <&clock CLK_ACLK200>,
-			 <&clock CLK_ACLK400_MCUISP>,
-			 <&clock CLK_DIV_ACLK200>,
-			 <&clock CLK_DIV_ACLK400_MCUISP>,
-			 <&clock CLK_UART_ISP_SCLK>;
-		clock-names = "lite0", "lite1", "ppmuispx",
-			      "ppmuispmx", "isp",
-			      "drc", "fd", "mcuisp",
-			      "gicisp", "mcuctl_isp", "pwm_isp",
-			      "ispdiv0", "ispdiv1", "mcuispdiv0",
-			      "mcuispdiv1", "mpll", "aclk200",
-			      "aclk400mcuisp", "div_aclk200",
-			      "div_aclk400mcuisp", "uart";
-		iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>,
-			 <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>;
-		iommu-names = "isp", "drc", "fd", "mcuctl";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		status = "disabled";
-
-		pmu@10020000 {
-			reg = <0x10020000 0x3000>;
-		};
-
-		i2c1_isp: i2c-isp@12140000 {
-			compatible = "samsung,exynos4212-i2c-isp";
-			reg = <0x12140000 0x100>;
-			clocks = <&isp_clock CLK_ISP_I2C1_ISP>;
-			clock-names = "i2c_isp";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-};
-
-&exynos_usbphy {
-	compatible = "samsung,exynos4x12-usb2-phy";
-	samsung,sysreg-phandle = <&sys_reg>;
-};
-
-&fimc_0 {
-	compatible = "samsung,exynos4212-fimc";
-	samsung,pix-limits = <4224 8192 1920 4224>;
-	samsung,mainscaler-ext;
-	samsung,isp-wb;
-	samsung,cam-if;
-};
-
-&fimc_1 {
-	compatible = "samsung,exynos4212-fimc";
-	samsung,pix-limits = <4224 8192 1920 4224>;
-	samsung,mainscaler-ext;
-	samsung,isp-wb;
-	samsung,cam-if;
-};
-
-&fimc_2 {
-	compatible = "samsung,exynos4212-fimc";
-	samsung,pix-limits = <4224 8192 1920 4224>;
-	samsung,mainscaler-ext;
-	samsung,isp-wb;
-	samsung,lcd-wb;
-	samsung,cam-if;
-};
-
-&fimc_3 {
-	compatible = "samsung,exynos4212-fimc";
-	samsung,pix-limits = <1920 8192 1366 1920>;
-	samsung,rotators = <0>;
-	samsung,mainscaler-ext;
-	samsung,isp-wb;
-	samsung,lcd-wb;
-};
-
-&gic {
-	cpu-offset = <0x4000>;
-};
-
-&gpu {
-	interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-	interrupt-names = "gp",
-			  "gpmmu",
-			  "pp0",
-			  "ppmmu0",
-			  "pp1",
-			  "ppmmu1",
-			  "pp2",
-			  "ppmmu2",
-			  "pp3",
-			  "ppmmu3",
-			  "pmu";
-	operating-points-v2 = <&gpu_opp_table>;
-
-	gpu_opp_table: opp-table {
-		compatible = "operating-points-v2";
-
-		opp-160000000 {
-			opp-hz = /bits/ 64 <160000000>;
-			opp-microvolt = <875000>;
-		};
-		opp-267000000 {
-			opp-hz = /bits/ 64 <267000000>;
-			opp-microvolt = <900000>;
-		};
-		opp-350000000 {
-			opp-hz = /bits/ 64 <350000000>;
-			opp-microvolt = <950000>;
-		};
-		opp-440000000 {
-			opp-hz = /bits/ 64 <440000000>;
-			opp-microvolt = <1025000>;
-		};
-	};
-};
-
-&hdmi {
-	compatible = "samsung,exynos4212-hdmi";
-};
-
-&jpeg_codec {
-	compatible = "samsung,exynos4212-jpeg";
-};
-
-&rotator {
-	compatible = "samsung,exynos4212-rotator";
-};
-
-&mixer {
-	compatible = "samsung,exynos4212-mixer";
-	clock-names = "mixer", "hdmi", "sclk_hdmi", "vp";
-	clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
-		 <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>;
-	interconnects = <&bus_display &bus_dmc>;
-};
-
-&pmu {
-	interrupts = <2 2>, <3 2>, <18 2>, <19 2>;
-	interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
-	status = "okay";
-};
-
-&pmu_system_controller {
-	compatible = "samsung,exynos4412-pmu", "syscon";
-	clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
-			"clkout4", "clkout8", "clkout9";
-	clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
-		<&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>,
-		<&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, <&clock CLK_XUSBXTI>;
-	#clock-cells = <1>;
-};
-
-&tmu {
-	compatible = "samsung,exynos4412-tmu";
-	interrupt-parent = <&combiner>;
-	interrupts = <2 4>;
-	reg = <0x100C0000 0x100>;
-	clocks = <&clock 383>;
-	clock-names = "tmu_apbif";
-	status = "disabled";
-};
-
-#include "exynos4412-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/exynos5260-xyref5260.dts b/arch/arm/boot/dts/exynos5260-xyref5260.dts
deleted file mode 100644
index 0dc2ec16aa0a..000000000000
--- a/arch/arm/boot/dts/exynos5260-xyref5260.dts
+++ /dev/null
@@ -1,90 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung XYREF5260 board device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- */
-
-/dts-v1/;
-#include "exynos5260.dtsi"
-
-/ {
-	model = "Samsung XYREF5260 board based on Exynos5260";
-	compatible = "samsung,xyref5260", "samsung,exynos5260", "samsung,exynos5";
-
-	memory@20000000 {
-		device_type = "memory";
-		reg = <0x20000000 0x80000000>;
-	};
-
-	chosen {
-		stdout-path = "serial2:115200n8";
-	};
-
-	fin_pll: xxti {
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-		clock-output-names = "fin_pll";
-		#clock-cells = <0>;
-	};
-
-	xrtcxti: xrtcxti {
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-		clock-output-names = "xrtcxti";
-		#clock-cells = <0>;
-	};
-};
-
-&pinctrl_0 {
-	hdmi_hpd_irq: hdmi-hpd-irq {
-		samsung,pins = "gpx3-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&mmc_0 {
-	status = "okay";
-	broken-cd;
-	cap-mmc-highspeed;
-	supports-hs200-mode; /* 200 MHz */
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <0 4>;
-	samsung,dw-mshc-ddr-timing = <0 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_rdqs &sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
-	bus-width = <8>;
-};
-
-&mmc_2 {
-	status = "okay";
-	cap-sd-highspeed;
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
-	bus-width = <4>;
-	disable-wp;
-};
diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi
deleted file mode 100644
index 52fa211525ce..000000000000
--- a/arch/arm/boot/dts/exynos5260.dtsi
+++ /dev/null
@@ -1,425 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung Exynos5260 SoC device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- */
-
-#include <dt-bindings/clock/exynos5260-clk.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "samsung,exynos5260", "samsung,exynos5";
-	interrupt-parent = <&gic>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		i2c0 = &hsi2c_0;
-		i2c1 = &hsi2c_1;
-		i2c2 = &hsi2c_2;
-		i2c3 = &hsi2c_3;
-		pinctrl0 = &pinctrl_0;
-		pinctrl1 = &pinctrl_1;
-		pinctrl2 = &pinctrl_2;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu-map {
-			cluster0 {
-				core0 {
-					cpu = <&cpu0>;
-				};
-				core1 {
-					cpu = <&cpu1>;
-				};
-			};
-
-			cluster1 {
-				core0 {
-					cpu = <&cpu2>;
-				};
-				core1 {
-					cpu = <&cpu3>;
-				};
-				core2 {
-					cpu = <&cpu4>;
-				};
-				core3 {
-					cpu = <&cpu5>;
-				};
-			};
-		};
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x0>;
-			cci-control-port = <&cci_control1>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x1>;
-			cci-control-port = <&cci_control1>;
-		};
-
-		cpu2: cpu@100 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x100>;
-			cci-control-port = <&cci_control0>;
-		};
-
-		cpu3: cpu@101 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x101>;
-			cci-control-port = <&cci_control0>;
-		};
-
-		cpu4: cpu@102 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x102>;
-			cci-control-port = <&cci_control0>;
-		};
-
-		cpu5: cpu@103 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x103>;
-			cci-control-port = <&cci_control0>;
-		};
-	};
-
-	soc: soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		clock_top: clock-controller@10010000 {
-			compatible = "samsung,exynos5260-clock-top";
-			reg = <0x10010000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_peri: clock-controller@10200000 {
-			compatible = "samsung,exynos5260-clock-peri";
-			reg = <0x10200000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_egl: clock-controller@10600000 {
-			compatible = "samsung,exynos5260-clock-egl";
-			reg = <0x10600000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_kfc: clock-controller@10700000 {
-			compatible = "samsung,exynos5260-clock-kfc";
-			reg = <0x10700000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_g2d: clock-controller@10a00000 {
-			compatible = "samsung,exynos5260-clock-g2d";
-			reg = <0x10A00000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_mif: clock-controller@10ce0000 {
-			compatible = "samsung,exynos5260-clock-mif";
-			reg = <0x10CE0000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_mfc: clock-controller@11090000 {
-			compatible = "samsung,exynos5260-clock-mfc";
-			reg = <0x11090000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_g3d: clock-controller@11830000 {
-			compatible = "samsung,exynos5260-clock-g3d";
-			reg = <0x11830000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_fsys: clock-controller@122e0000 {
-			compatible = "samsung,exynos5260-clock-fsys";
-			reg = <0x122E0000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_aud: clock-controller@128c0000 {
-			compatible = "samsung,exynos5260-clock-aud";
-			reg = <0x128C0000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_isp: clock-controller@133c0000 {
-			compatible = "samsung,exynos5260-clock-isp";
-			reg = <0x133C0000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_gscl: clock-controller@13f00000 {
-			compatible = "samsung,exynos5260-clock-gscl";
-			reg = <0x13F00000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_disp: clock-controller@14550000 {
-			compatible = "samsung,exynos5260-clock-disp";
-			reg = <0x14550000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		gic: interrupt-controller@10481000 {
-			compatible = "arm,gic-400", "arm,cortex-a15-gic";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			reg = <0x10481000 0x1000>,
-				<0x10482000 0x2000>,
-				<0x10484000 0x2000>,
-				<0x10486000 0x2000>;
-			interrupts = <GIC_PPI 9
-					(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-		};
-
-		chipid: chipid@10000000 {
-			compatible = "samsung,exynos4210-chipid";
-			reg = <0x10000000 0x100>;
-		};
-
-		mct: timer@100b0000 {
-			compatible = "samsung,exynos4210-mct";
-			reg = <0x100B0000 0x1000>;
-			clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>;
-			clock-names = "fin_pll", "mct";
-			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		cci: cci@10f00000 {
-			compatible = "arm,cci-400";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x10F00000 0x1000>;
-			ranges = <0x0 0x10F00000 0x6000>;
-
-			cci_control0: slave-if@4000 {
-				compatible = "arm,cci-400-ctrl-if";
-				interface-type = "ace";
-				reg = <0x4000 0x1000>;
-			};
-
-			cci_control1: slave-if@5000 {
-				compatible = "arm,cci-400-ctrl-if";
-				interface-type = "ace";
-				reg = <0x5000 0x1000>;
-			};
-		};
-
-		pinctrl_0: pinctrl@11600000 {
-			compatible = "samsung,exynos5260-pinctrl";
-			reg = <0x11600000 0x1000>;
-			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-
-			wakeup-interrupt-controller {
-				compatible = "samsung,exynos4210-wakeup-eint";
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		pinctrl_1: pinctrl@12290000 {
-			compatible = "samsung,exynos5260-pinctrl";
-			reg = <0x12290000 0x1000>;
-			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		pinctrl_2: pinctrl@128b0000 {
-			compatible = "samsung,exynos5260-pinctrl";
-			reg = <0x128B0000 0x1000>;
-			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		pmu_system_controller: system-controller@10d50000 {
-			compatible = "samsung,exynos5260-pmu", "syscon";
-			reg = <0x10D50000 0x10000>;
-		};
-
-		uart0: serial@12c00000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C00000 0x100>;
-			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock_peri PERI_CLK_UART0>, <&clock_peri PERI_SCLK_UART0>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
-
-		uart1: serial@12c10000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C10000 0x100>;
-			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock_peri PERI_CLK_UART1>, <&clock_peri PERI_SCLK_UART1>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
-
-		uart2: serial@12c20000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C20000 0x100>;
-			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock_peri PERI_CLK_UART2>, <&clock_peri PERI_SCLK_UART2>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
-
-		uart3: serial@12860000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12860000 0x100>;
-			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock_aud AUD_CLK_AUD_UART>, <&clock_aud AUD_SCLK_AUD_UART>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
-
-		mmc_0: mmc@12140000 {
-			compatible = "samsung,exynos5250-dw-mshc";
-			reg = <0x12140000 0x2000>;
-			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock_fsys FSYS_CLK_MMC0>, <&clock_top TOP_SCLK_MMC0>;
-			clock-names = "biu", "ciu";
-			assigned-clocks =
-				<&clock_top TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_A>,
-				<&clock_top TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_B>,
-				<&clock_top TOP_SCLK_MMC0>;
-			assigned-clock-parents =
-				<&clock_top TOP_MOUT_BUSTOP_PLL_USER>,
-				<&clock_top TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_A>;
-			assigned-clock-rates = <0>, <0>, <800000000>;
-			fifo-depth = <64>;
-			status = "disabled";
-		};
-
-		mmc_1: mmc@12150000 {
-			compatible = "samsung,exynos5250-dw-mshc";
-			reg = <0x12150000 0x2000>;
-			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock_fsys FSYS_CLK_MMC1>, <&clock_top TOP_SCLK_MMC1>;
-			clock-names = "biu", "ciu";
-			assigned-clocks =
-				<&clock_top TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_A>,
-				<&clock_top TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_B>,
-				<&clock_top TOP_SCLK_MMC1>;
-			assigned-clock-parents =
-				<&clock_top TOP_MOUT_BUSTOP_PLL_USER>,
-				<&clock_top TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_A>;
-			assigned-clock-rates = <0>, <0>, <800000000>;
-			fifo-depth = <64>;
-			status = "disabled";
-		};
-
-		mmc_2: mmc@12160000 {
-			compatible = "samsung,exynos5250-dw-mshc";
-			reg = <0x12160000 0x2000>;
-			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock_fsys FSYS_CLK_MMC2>, <&clock_top TOP_SCLK_MMC2>;
-			clock-names = "biu", "ciu";
-			assigned-clocks =
-				<&clock_top TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_A>,
-				<&clock_top TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_B>,
-				<&clock_top TOP_SCLK_MMC2>;
-			assigned-clock-parents =
-				<&clock_top TOP_MOUT_BUSTOP_PLL_USER>,
-				<&clock_top TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_A>;
-			assigned-clock-rates = <0>, <0>, <800000000>;
-			fifo-depth = <64>;
-			status = "disabled";
-		};
-
-		hsi2c_0: hsi2c@12da0000 {
-			compatible = "samsung,exynos5260-hsi2c";
-			reg = <0x12DA0000 0x1000>;
-			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_hs_bus>;
-			clocks = <&clock_peri PERI_CLK_HSIC0>;
-			clock-names = "hsi2c";
-			status = "disabled";
-		};
-
-		hsi2c_1: hsi2c@12db0000 {
-			compatible = "samsung,exynos5260-hsi2c";
-			reg = <0x12DB0000 0x1000>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_hs_bus>;
-			clocks = <&clock_peri PERI_CLK_HSIC1>;
-			clock-names = "hsi2c";
-			status = "disabled";
-		};
-
-		hsi2c_2: hsi2c@12dc0000 {
-			compatible = "samsung,exynos5260-hsi2c";
-			reg = <0x12DC0000 0x1000>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c2_hs_bus>;
-			clocks = <&clock_peri PERI_CLK_HSIC2>;
-			clock-names = "hsi2c";
-			status = "disabled";
-		};
-
-		hsi2c_3: hsi2c@12dd0000 {
-			compatible = "samsung,exynos5260-hsi2c";
-			reg = <0x12DD0000 0x1000>;
-			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c3_hs_bus>;
-			clocks = <&clock_peri PERI_CLK_HSIC3>;
-			clock-names = "hsi2c";
-			status = "disabled";
-		};
-	};
-};
-
-#include "exynos5260-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/gemini-wbd111.dts b/arch/arm/boot/dts/gemini-wbd111.dts
deleted file mode 100644
index 5602ba8f30f2..000000000000
--- a/arch/arm/boot/dts/gemini-wbd111.dts
+++ /dev/null
@@ -1,183 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree file for Wiliboard WBD-111
- */
-
-/dts-v1/;
-
-#include "gemini.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Wiliboard WBD-111";
-	compatible = "wiliboard,wbd111", "cortina,gemini";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory@0 {
-		/* 128 MB */
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		button-setup {
-			debounce-interval = <100>;
-			wakeup-source;
-			linux,code = <KEY_SETUP>;
-			label = "reset";
-			/* Conflict with ICE */
-			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-red-l3 {
-			label = "wbd111:red:L3";
-			/* Conflict with TVC and extended parallel flash */
-			gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-		led-green-l4 {
-			label = "wbd111:green:L4";
-			/* Conflict with TVC and extended parallel flash */
-			gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-		led-red-l4 {
-			label = "wbd111:red:L4";
-			/* Conflict with TVC and extended parallel flash */
-			gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-		led-greeb-l3 {
-			label = "wbd111:green:L3";
-			/* Conflict with TVC and extended parallel flash */
-			gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	mdio0: mdio {
-		compatible = "virtual,mdio-gpio";
-		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
-			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		phy0: ethernet-phy@1 {
-			reg = <1>;
-			device_type = "ethernet-phy";
-		};
-	};
-
-	soc {
-		flash@30000000 {
-			status = "okay";
-			/* 8MB of flash */
-			reg = <0x30000000 0x00800000>;
-
-			partition@0 {
-				label = "RedBoot";
-				reg = <0x00000000 0x00020000>;
-				read-only;
-			};
-			partition@20000 {
-				label = "kernel";
-				reg = <0x00020000 0x00100000>;
-			};
-			partition@120000 {
-				label = "rootfs";
-				reg = <0x00120000 0x006a0000>;
-			};
-			partition@7c0000 {
-				label = "VCTL";
-				reg = <0x007c0000 0x00010000>;
-				read-only;
-			};
-			partition@7d0000 {
-				label = "cfg";
-				reg = <0x007d0000 0x00010000>;
-				read-only;
-			};
-			partition@7e0000 {
-				label = "FIS";
-				reg = <0x007e0000 0x00010000>;
-				read-only;
-			};
-		};
-
-		syscon: syscon@40000000 {
-			pinctrl {
-				/*
-				 * gpio0agrp cover line 0-4
-				 * gpio0bgrp cover line 5
-				 */
-				gpio0_default_pins: pinctrl-gpio0 {
-					mux {
-						function = "gpio0";
-						groups = "gpio0agrp",
-						"gpio0bgrp";
-					};
-				};
-			};
-		};
-
-		gpio0: gpio@4d000000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gpio0_default_pins>;
-		};
-
-		pci@50000000 {
-			status = "okay";
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map =
-				<0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
-				<0x4800 0 0 2 &pci_intc 1>,
-				<0x4800 0 0 3 &pci_intc 2>,
-				<0x4800 0 0 4 &pci_intc 3>,
-				<0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
-				<0x5000 0 0 2 &pci_intc 2>,
-				<0x5000 0 0 3 &pci_intc 3>,
-				<0x5000 0 0 4 &pci_intc 0>,
-				<0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
-				<0x5800 0 0 2 &pci_intc 3>,
-				<0x5800 0 0 3 &pci_intc 0>,
-				<0x5800 0 0 4 &pci_intc 1>,
-				<0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
-				<0x6000 0 0 2 &pci_intc 0>,
-				<0x6000 0 0 3 &pci_intc 1>,
-				<0x6000 0 0 4 &pci_intc 2>;
-		};
-
-		ethernet@60000000 {
-			status = "okay";
-
-			ethernet-port@0 {
-				phy-mode = "rgmii";
-				phy-handle = <&phy0>;
-			};
-			ethernet-port@1 {
-				/* Not used in this platform */
-			};
-		};
-
-		usb@68000000 {
-			status = "okay";
-		};
-
-		usb@69000000 {
-			status = "okay";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/gemini-wbd222.dts b/arch/arm/boot/dts/gemini-wbd222.dts
deleted file mode 100644
index a4a260c36d75..000000000000
--- a/arch/arm/boot/dts/gemini-wbd222.dts
+++ /dev/null
@@ -1,195 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree file for Wiliboard WBD-222
- */
-
-/dts-v1/;
-
-#include "gemini.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Wiliboard WBD-222";
-	compatible = "wiliboard,wbd222", "cortina,gemini";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory@0 { /* 128 MB */
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		button-setup {
-			debounce-interval = <100>;
-			wakeup-source;
-			linux,code = <KEY_SETUP>;
-			label = "reset";
-			/* Conflict with ICE */
-			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-red-l3 {
-			label = "wbd111:red:L3";
-			/* Conflict with TVC and extended parallel flash */
-			gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-		led-green-l4 {
-			label = "wbd111:green:L4";
-			/* Conflict with TVC and extended parallel flash */
-			gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-		led-red-l4 {
-			label = "wbd111:red:L4";
-			/* Conflict with TVC and extended parallel flash */
-			gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-		led-green-l3 {
-			label = "wbd111:green:L3";
-			/* Conflict with TVC and extended parallel flash */
-			gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	mdio0: mdio {
-		compatible = "virtual,mdio-gpio";
-		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
-			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		phy0: ethernet-phy@1 {
-			reg = <1>;
-			device_type = "ethernet-phy";
-		};
-
-		phy1: ethernet-phy@3 {
-			reg = <3>;
-			device_type = "ethernet-phy";
-		};
-	};
-
-	soc {
-		flash@30000000 {
-			status = "okay";
-			/* 8MB of flash */
-			reg = <0x30000000 0x00800000>;
-
-			partition@0 {
-				label = "RedBoot";
-				reg = <0x00000000 0x00020000>;
-				read-only;
-			};
-			partition@20000 {
-				label = "kernel";
-				reg = <0x00020000 0x00100000>;
-			};
-			partition@120000 {
-				label = "rootfs";
-				reg = <0x00120000 0x006a0000>;
-			};
-			partition@7c0000 {
-				label = "VCTL";
-				reg = <0x007c0000 0x00010000>;
-				read-only;
-			};
-			partition@7d0000 {
-				label = "cfg";
-				reg = <0x007d0000 0x00010000>;
-				read-only;
-			};
-			partition@7e0000 {
-				label = "FIS";
-				reg = <0x007e0000 0x00010000>;
-				read-only;
-			};
-		};
-
-		syscon: syscon@40000000 {
-			pinctrl {
-				/*
-				 * gpio0agrp cover line 0-4
-				 * gpio0bgrp cover line 5
-				 */
-				gpio0_default_pins: pinctrl-gpio0 {
-					mux {
-						function = "gpio0";
-						groups = "gpio0agrp",
-						"gpio0bgrp";
-					};
-				};
-				pinctrl-gmii {
-					/* This platform use both the ethernet ports */
-					mux {
-						function = "gmii";
-						groups = "gmii_gmac0_grp", "gmii_gmac1_grp";
-					};
-				};
-			};
-		};
-
-		gpio0: gpio@4d000000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gpio0_default_pins>;
-		};
-
-		pci@50000000 {
-			status = "okay";
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map =
-				<0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
-				<0x4800 0 0 2 &pci_intc 1>,
-				<0x4800 0 0 3 &pci_intc 2>,
-				<0x4800 0 0 4 &pci_intc 3>,
-				<0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
-				<0x5000 0 0 2 &pci_intc 2>,
-				<0x5000 0 0 3 &pci_intc 3>,
-				<0x5000 0 0 4 &pci_intc 0>,
-				<0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
-				<0x5800 0 0 2 &pci_intc 3>,
-				<0x5800 0 0 3 &pci_intc 0>,
-				<0x5800 0 0 4 &pci_intc 1>,
-				<0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
-				<0x6000 0 0 2 &pci_intc 0>,
-				<0x6000 0 0 3 &pci_intc 1>,
-				<0x6000 0 0 4 &pci_intc 2>;
-		};
-
-		ethernet@60000000 {
-			status = "okay";
-
-			ethernet-port@0 {
-				phy-mode = "rgmii";
-				phy-handle = <&phy0>;
-			};
-			ethernet-port@1 {
-				phy-mode = "rgmii";
-				phy-handle = <&phy1>;
-			};
-		};
-
-		usb@68000000 {
-			status = "okay";
-		};
-
-		usb@69000000 {
-			status = "okay";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/gemini/Makefile b/arch/arm/boot/dts/gemini/Makefile
new file mode 100644
index 000000000000..f9f63ce3eb49
--- /dev/null
+++ b/arch/arm/boot/dts/gemini/Makefile
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_GEMINI) += \
+	gemini-dlink-dir-685.dtb \
+	gemini-dlink-dns-313.dtb \
+	gemini-nas4220b.dtb \
+	gemini-ns2502.dtb \
+	gemini-rut1xx.dtb \
+	gemini-sl93512r.dtb \
+	gemini-sq201.dtb \
+	gemini-ssi1328.dtb \
+	gemini-wbd111.dtb \
+	gemini-wbd222.dtb
diff --git a/arch/arm/boot/dts/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini/gemini-dlink-dir-685.dts
index c79a2a02dd6b..b4dbcf8f168e 100644
--- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
+++ b/arch/arm/boot/dts/gemini/gemini-dlink-dir-685.dts
@@ -27,10 +27,10 @@
 	gpio_keys {
 		compatible = "gpio-keys";
 
-		button-esc {
+		button-reset {
 			debounce-interval = <100>;
 			wakeup-source;
-			linux,code = <KEY_ESC>;
+			linux,code = <KEY_RESTART>;
 			label = "reset";
 			/* Collides with LPC_LAD[0], UART DCD, SSP 97RST */
 			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
@@ -187,7 +187,7 @@
 	};
 
 	/* This is a RealTek RTL8366RB switch and PHY using SMI over GPIO */
-	switch {
+	ethernet-switch {
 		compatible = "realtek,rtl8366rb";
 		/* 22 = MDIO (has input reads), 21 = MDC (clock, output only) */
 		mdc-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
@@ -204,36 +204,36 @@
 			#interrupt-cells = <1>;
 		};
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@0 {
+			ethernet-port@0 {
 				reg = <0>;
 				label = "lan0";
 				phy-handle = <&phy0>;
 			};
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan1";
 				phy-handle = <&phy1>;
 			};
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan2";
 				phy-handle = <&phy2>;
 			};
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan3";
 				phy-handle = <&phy3>;
 			};
-			port@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "wan";
 				phy-handle = <&phy4>;
 			};
-			rtl8366rb_cpu_port: port@5 {
+			rtl8366rb_cpu_port: ethernet-port@5 {
 				reg = <5>;
 				label = "cpu";
 				ethernet = <&gmac0>;
@@ -252,27 +252,27 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			phy0: phy@0 {
+			phy0: ethernet-phy@0 {
 				reg = <0>;
 				interrupt-parent = <&switch_intc>;
 				interrupts = <0>;
 			};
-			phy1: phy@1 {
+			phy1: ethernet-phy@1 {
 				reg = <1>;
 				interrupt-parent = <&switch_intc>;
 				interrupts = <1>;
 			};
-			phy2: phy@2 {
+			phy2: ethernet-phy@2 {
 				reg = <2>;
 				interrupt-parent = <&switch_intc>;
 				interrupts = <2>;
 			};
-			phy3: phy@3 {
+			phy3: ethernet-phy@3 {
 				reg = <3>;
 				interrupt-parent = <&switch_intc>;
 				interrupts = <3>;
 			};
-			phy4: phy@4 {
+			phy4: ethernet-phy@4 {
 				reg = <4>;
 				interrupt-parent = <&switch_intc>;
 				interrupts = <12>;
@@ -439,24 +439,6 @@
 
 		pci@50000000 {
 			status = "okay";
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map =
-				<0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
-				<0x4800 0 0 2 &pci_intc 1>,
-				<0x4800 0 0 3 &pci_intc 2>,
-				<0x4800 0 0 4 &pci_intc 3>,
-				<0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
-				<0x5000 0 0 2 &pci_intc 2>,
-				<0x5000 0 0 3 &pci_intc 3>,
-				<0x5000 0 0 4 &pci_intc 0>,
-				<0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
-				<0x5800 0 0 2 &pci_intc 3>,
-				<0x5800 0 0 3 &pci_intc 0>,
-				<0x5800 0 0 4 &pci_intc 1>,
-				<0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
-				<0x6000 0 0 2 &pci_intc 0>,
-				<0x6000 0 0 3 &pci_intc 1>,
-				<0x6000 0 0 4 &pci_intc 2>;
 		};
 
 		ethernet@60000000 {
diff --git a/arch/arm/boot/dts/gemini-dlink-dns-313.dts b/arch/arm/boot/dts/gemini/gemini-dlink-dns-313.dts
index eba1c94ed7f7..8c54d3a5a721 100644
--- a/arch/arm/boot/dts/gemini-dlink-dns-313.dts
+++ b/arch/arm/boot/dts/gemini/gemini-dlink-dns-313.dts
@@ -33,10 +33,10 @@
 	gpio_keys {
 		compatible = "gpio-keys";
 
-		button-esc {
+		button-reset {
 			debounce-interval = <100>;
 			wakeup-source;
-			linux,code = <KEY_ESC>;
+			linux,code = <KEY_RESTART>;
 			label = "reset";
 			gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
 		};
@@ -80,6 +80,15 @@
 		#cooling-cells = <2>;
 	};
 
+	/*
+	 * This is the type B USB connector on the device,
+	 * a GPIO-controlled USB VBUS detect
+	 */
+	usb1_phy: phy {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		#phy-cells = <0>;
+		vbus-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+	};
 
 	/* Global Mixed-Mode Technology G751 mounted on GPIO I2C */
 	i2c {
@@ -164,6 +173,8 @@
 			compatible = "cortina,gemini-flash", "jedec-flash";
 			status = "okay";
 			reg = <0x30000000 0x00080000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 
 			/*
 			 * This "RedBoot" is the Storlink derivative.
@@ -300,5 +311,13 @@
 		ide@63000000 {
 			status = "okay";
 		};
+
+		usb@69000000 {
+			status = "okay";
+			dr_mode = "peripheral";
+			usb-phy = <&usb1_phy>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb_default_pins>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/gemini-nas4220b.dts b/arch/arm/boot/dts/gemini/gemini-nas4220b.dts
index 13112a8a5dd8..6544c730340f 100644
--- a/arch/arm/boot/dts/gemini-nas4220b.dts
+++ b/arch/arm/boot/dts/gemini/gemini-nas4220b.dts
@@ -84,7 +84,7 @@
 			partitions {
 				compatible = "redboot-fis";
 				/* Eraseblock at 0xfe0000 */
-				fis-index-block = <0x1fc>;
+				fis-index-block = <0x7f>;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/gemini/gemini-ns2502.dts b/arch/arm/boot/dts/gemini/gemini-ns2502.dts
new file mode 100644
index 000000000000..e6eeb35e8819
--- /dev/null
+++ b/arch/arm/boot/dts/gemini/gemini-ns2502.dts
@@ -0,0 +1,123 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Corentin Labbe <clabbe@baylibre.com>
+ * Device Tree file for Edimax NS 2502
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+
+/ {
+	model = "Edimax NS-2502";
+	compatible = "edimax,ns-2502", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	aliases {
+		mdio-gpio0 = &mdio0;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,19200n8";
+		stdout-path = &uart0;
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+			device_type = "ethernet-phy";
+		};
+	};
+};
+
+&ethernet {
+	status = "okay";
+	ethernet-port@0 {
+		phy-mode = "rgmii-id";
+		phy-handle = <&phy0>;
+	};
+};
+
+&flash {
+	status = "okay";
+	/* 8MB of flash */
+	reg = <0x30000000 0x00800000>;
+
+	pinctrl-names = "enabled", "disabled";
+	pinctrl-0 = <&pflash_default_pins>;
+	pinctrl-1 = <&pflash_disabled_pins>;
+
+	partitions {
+		compatible = "redboot-fis";
+		/* Eraseblock at 0x7e0000 */
+		fis-index-block = <0x3f>;
+	};
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio0_default_pins>;
+};
+
+&ide0 {
+	status = "okay";
+};
+
+&ide1 {
+	status = "okay";
+};
+
+&sata {
+	cortina,gemini-ata-muxmode = <3>;
+	cortina,gemini-enable-sata-bridge;
+	status = "okay";
+};
+
+&syscon {
+	pinctrl {
+		/*
+		 * gpio0agrp cover line 0-4
+		 * gpio0bgrp cover line 5
+		 */
+		gpio0_default_pins: pinctrl-gpio0 {
+			    mux {
+				    function = "gpio0";
+				    groups = "gpio0agrp", "gpio0bgrp", "gpio0hgrp";
+			    };
+		};
+		pflash_disabled_pins: pinctrl-pflash-disabled {
+			mux {
+				function = "gpio0";
+				groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp",
+					 "gpio0kgrp";
+			};
+		};
+		pinctrl-gmii {
+			mux {
+				function = "gmii";
+				groups = "gmii_gmac0_grp";
+				};
+		};
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/gemini-rut1xx.dts b/arch/arm/boot/dts/gemini/gemini-rut1xx.dts
index 0ebda4efd9d0..0ebda4efd9d0 100644
--- a/arch/arm/boot/dts/gemini-rut1xx.dts
+++ b/arch/arm/boot/dts/gemini/gemini-rut1xx.dts
diff --git a/arch/arm/boot/dts/gemini-sl93512r.dts b/arch/arm/boot/dts/gemini/gemini-sl93512r.dts
index c78e55fd2562..4992ec276de9 100644
--- a/arch/arm/boot/dts/gemini-sl93512r.dts
+++ b/arch/arm/boot/dts/gemini/gemini-sl93512r.dts
@@ -43,7 +43,7 @@
 		button-setup {
 			debounce-interval = <50>;
 			wakeup-source;
-			linux,code = <KEY_SETUP>;
+			linux,code = <KEY_RESTART>;
 			label = "factory reset";
 			/* Conflict with NAND flash */
 			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
@@ -93,7 +93,7 @@
 		cs-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <1>;
 
-		switch@0 {
+		ethernet-switch@0 {
 			compatible = "vitesse,vsc7385";
 			reg = <0>;
 			/* Specified for 2.5 MHz or below */
@@ -101,27 +101,27 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 
-			ports {
+			ethernet-ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				port@0 {
+				ethernet-port@0 {
 					reg = <0>;
 					label = "lan1";
 				};
-				port@1 {
+				ethernet-port@1 {
 					reg = <1>;
 					label = "lan2";
 				};
-				port@2 {
+				ethernet-port@2 {
 					reg = <2>;
 					label = "lan3";
 				};
-				port@3 {
+				ethernet-port@3 {
 					reg = <3>;
 					label = "lan4";
 				};
-				vsc: port@6 {
+				vsc: ethernet-port@6 {
 					reg = <6>;
 					label = "cpu";
 					ethernet = <&gmac1>;
@@ -256,24 +256,6 @@
 
 		pci@50000000 {
 			status = "okay";
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map =
-				<0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
-				<0x4800 0 0 2 &pci_intc 1>,
-				<0x4800 0 0 3 &pci_intc 2>,
-				<0x4800 0 0 4 &pci_intc 3>,
-				<0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
-				<0x5000 0 0 2 &pci_intc 2>,
-				<0x5000 0 0 3 &pci_intc 3>,
-				<0x5000 0 0 4 &pci_intc 0>,
-				<0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
-				<0x5800 0 0 2 &pci_intc 3>,
-				<0x5800 0 0 3 &pci_intc 0>,
-				<0x5800 0 0 4 &pci_intc 1>,
-				<0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
-				<0x6000 0 0 2 &pci_intc 0>,
-				<0x6000 0 0 3 &pci_intc 1>,
-				<0x6000 0 0 4 &pci_intc 2>;
 		};
 
 		ethernet@60000000 {
diff --git a/arch/arm/boot/dts/gemini-sq201.dts b/arch/arm/boot/dts/gemini/gemini-sq201.dts
index 1b64cc80b55a..f8c6f6e5cdea 100644
--- a/arch/arm/boot/dts/gemini-sq201.dts
+++ b/arch/arm/boot/dts/gemini/gemini-sq201.dts
@@ -30,7 +30,7 @@
 		button-setup {
 			debounce-interval = <100>;
 			wakeup-source;
-			linux,code = <KEY_SETUP>;
+			linux,code = <KEY_RESTART>;
 			label = "factory reset";
 			/* Conflict with NAND flash */
 			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
@@ -78,7 +78,7 @@
 		cs-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <1>;
 
-		switch@0 {
+		ethernet-switch@0 {
 			compatible = "vitesse,vsc7395";
 			reg = <0>;
 			/* Specified for 2.5 MHz or below */
@@ -86,27 +86,27 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 
-			ports {
+			ethernet-ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				port@0 {
+				ethernet-port@0 {
 					reg = <0>;
 					label = "lan1";
 				};
-				port@1 {
+				ethernet-port@1 {
 					reg = <1>;
 					label = "lan2";
 				};
-				port@2 {
+				ethernet-port@2 {
 					reg = <2>;
 					label = "lan3";
 				};
-				port@3 {
+				ethernet-port@3 {
 					reg = <3>;
 					label = "lan4";
 				};
-				vsc: port@6 {
+				vsc: ethernet-port@6 {
 					reg = <6>;
 					label = "cpu";
 					ethernet = <&gmac1>;
@@ -252,24 +252,6 @@
 
 		pci@50000000 {
 			status = "okay";
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map =
-				<0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
-				<0x4800 0 0 2 &pci_intc 1>,
-				<0x4800 0 0 3 &pci_intc 2>,
-				<0x4800 0 0 4 &pci_intc 3>,
-				<0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
-				<0x5000 0 0 2 &pci_intc 2>,
-				<0x5000 0 0 3 &pci_intc 3>,
-				<0x5000 0 0 4 &pci_intc 0>,
-				<0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
-				<0x5800 0 0 2 &pci_intc 3>,
-				<0x5800 0 0 3 &pci_intc 0>,
-				<0x5800 0 0 4 &pci_intc 1>,
-				<0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
-				<0x6000 0 0 2 &pci_intc 0>,
-				<0x6000 0 0 3 &pci_intc 1>,
-				<0x6000 0 0 4 &pci_intc 2>;
 		};
 
 		ethernet@60000000 {
diff --git a/arch/arm/boot/dts/gemini/gemini-ssi1328.dts b/arch/arm/boot/dts/gemini/gemini-ssi1328.dts
new file mode 100644
index 000000000000..42e85f07cf76
--- /dev/null
+++ b/arch/arm/boot/dts/gemini/gemini-ssi1328.dts
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Corentin Labbe <clabbe@baylibre.com>
+ * Device Tree file for SSI 1328
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+
+/ {
+	model = "SSI 1328";
+	compatible = "ssi,1328", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	aliases {
+		mdio-gpio0 = &mdio0;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,19200n8 initrd=0x900000,9M";
+		stdout-path = &uart0;
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* LAN Marvell 88E1118 */
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+			device_type = "ethernet-phy";
+		};
+		/* WAN ICPlus IP101A */
+		phy1: ethernet-phy@2 {
+			reg = <2>;
+			device_type = "ethernet-phy";
+		};
+	};
+};
+
+&ethernet {
+	status = "okay";
+	ethernet-port@0 {
+		phy-mode = "rgmii";
+		phy-handle = <&phy0>;
+	};
+	ethernet-port@1 {
+		phy-mode = "rgmii";
+		phy-handle = <&phy1>;
+	};
+};
+
+&flash {
+	status = "okay";
+	/* 32MB of flash */
+	reg = <0x30000000 0x03200000>;
+
+	pinctrl-names = "enabled", "disabled";
+	pinctrl-0 = <&pflash_default_pins>;
+	pinctrl-1 = <&pflash_disabled_pins>;
+
+	partitions {
+		compatible = "redboot-fis";
+		/* Eraseblock at 0xfe0000 */
+		fis-index-block = <0x7F>;
+	};
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio0_default_pins>;
+};
+
+&ide0 {
+	status = "okay";
+};
+
+&ide1 {
+	status = "okay";
+};
+
+&sata {
+	cortina,gemini-ata-muxmode = <0>;
+	cortina,gemini-enable-sata-bridge;
+	status = "okay";
+};
+
+&syscon {
+	pinctrl {
+		/*
+		 * gpio0agrp cover line 0-4
+		 * gpio0bgrp cover line 5
+		 */
+		gpio0_default_pins: pinctrl-gpio0 {
+			mux {
+				function = "gpio0";
+				groups = "gpio0agrp", "gpio0bgrp";
+			};
+		};
+		pflash_disabled_pins: pinctrl-pflash-disabled {
+			mux {
+				function = "gpio0";
+				groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp",
+					 "gpio0kgrp";
+			};
+		};
+		pinctrl-gmii {
+			/* This platform use both the ethernet ports */
+			mux {
+				function = "gmii";
+				groups = "gmii_gmac0_grp", "gmii_gmac1_grp";
+			};
+		};
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/gemini/gemini-wbd111.dts b/arch/arm/boot/dts/gemini/gemini-wbd111.dts
new file mode 100644
index 000000000000..6a0c89e0c918
--- /dev/null
+++ b/arch/arm/boot/dts/gemini/gemini-wbd111.dts
@@ -0,0 +1,142 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Wiliboard WBD-111
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Wiliboard WBD-111";
+	compatible = "wiligear,wiliboard-wbd111", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-reset {
+			debounce-interval = <100>;
+			wakeup-source;
+			linux,code = <KEY_RESTART>;
+			label = "reset";
+			/* Conflict with ICE */
+			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-red-l3 {
+			label = "wbd111:red:L3";
+			/* Conflict with TVC and extended parallel flash */
+			gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-green-l4 {
+			label = "wbd111:green:L4";
+			/* Conflict with TVC and extended parallel flash */
+			gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-red-l4 {
+			label = "wbd111:red:L4";
+			/* Conflict with TVC and extended parallel flash */
+			gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-greeb-l3 {
+			label = "wbd111:green:L3";
+			/* Conflict with TVC and extended parallel flash */
+			gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+			device_type = "ethernet-phy";
+		};
+	};
+
+	soc {
+		flash@30000000 {
+			status = "okay";
+			/* 8MB of flash */
+			reg = <0x30000000 0x00800000>;
+
+			partitions {
+				compatible = "redboot-fis";
+				/* Eraseblock at 0x7e0000 */
+				fis-index-block = <0x3f>;
+			};
+		};
+
+		syscon: syscon@40000000 {
+			pinctrl {
+				/*
+				 * gpio0agrp cover line 0-4
+				 * gpio0bgrp cover line 5
+				 */
+				gpio0_default_pins: pinctrl-gpio0 {
+					mux {
+						function = "gpio0";
+						groups = "gpio0agrp",
+						"gpio0bgrp";
+					};
+				};
+			};
+		};
+
+		gpio0: gpio@4d000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio0_default_pins>;
+		};
+
+		pci@50000000 {
+			status = "okay";
+		};
+
+		ethernet@60000000 {
+			status = "okay";
+
+			ethernet-port@0 {
+				phy-mode = "rgmii";
+				phy-handle = <&phy0>;
+			};
+			ethernet-port@1 {
+				/* Not used in this platform */
+			};
+		};
+
+		usb@68000000 {
+			status = "okay";
+		};
+
+		usb@69000000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/gemini/gemini-wbd222.dts b/arch/arm/boot/dts/gemini/gemini-wbd222.dts
new file mode 100644
index 000000000000..d8b34ebad4b0
--- /dev/null
+++ b/arch/arm/boot/dts/gemini/gemini-wbd222.dts
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Wiliboard WBD-222
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Wiliboard WBD-222";
+	compatible = "wiligear,wiliboard-wbd222", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 { /* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-reset {
+			debounce-interval = <100>;
+			wakeup-source;
+			linux,code = <KEY_RESTART>;
+			label = "reset";
+			/* Conflict with ICE */
+			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-red-l3 {
+			label = "wbd111:red:L3";
+			/* Conflict with TVC and extended parallel flash */
+			gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-green-l4 {
+			label = "wbd111:green:L4";
+			/* Conflict with TVC and extended parallel flash */
+			gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-red-l4 {
+			label = "wbd111:red:L4";
+			/* Conflict with TVC and extended parallel flash */
+			gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-green-l3 {
+			label = "wbd111:green:L3";
+			/* Conflict with TVC and extended parallel flash */
+			gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+			device_type = "ethernet-phy";
+		};
+
+		phy1: ethernet-phy@3 {
+			reg = <3>;
+			device_type = "ethernet-phy";
+		};
+	};
+
+	soc {
+		flash@30000000 {
+			status = "okay";
+			/* 8MB of flash */
+			reg = <0x30000000 0x00800000>;
+
+			partitions {
+				compatible = "redboot-fis";
+				/* Eraseblock at 0x7e0000 */
+				fis-index-block = <0x3f>;
+			};
+		};
+
+		syscon: syscon@40000000 {
+			pinctrl {
+				/*
+				 * gpio0agrp cover line 0-4
+				 * gpio0bgrp cover line 5
+				 */
+				gpio0_default_pins: pinctrl-gpio0 {
+					mux {
+						function = "gpio0";
+						groups = "gpio0agrp",
+						"gpio0bgrp";
+					};
+				};
+				pinctrl-gmii {
+					/* This platform use both the ethernet ports */
+					mux {
+						function = "gmii";
+						groups = "gmii_gmac0_grp", "gmii_gmac1_grp";
+					};
+				};
+			};
+		};
+
+		gpio0: gpio@4d000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio0_default_pins>;
+		};
+
+		pci@50000000 {
+			status = "okay";
+		};
+
+		ethernet@60000000 {
+			status = "okay";
+
+			ethernet-port@0 {
+				phy-mode = "rgmii";
+				phy-handle = <&phy0>;
+			};
+			ethernet-port@1 {
+				phy-mode = "rgmii";
+				phy-handle = <&phy1>;
+			};
+		};
+
+		usb@68000000 {
+			status = "okay";
+		};
+
+		usb@69000000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/gemini.dtsi b/arch/arm/boot/dts/gemini/gemini.dtsi
index cc053af3c347..befe322bd7de 100644
--- a/arch/arm/boot/dts/gemini.dtsi
+++ b/arch/arm/boot/dts/gemini/gemini.dtsi
@@ -16,14 +16,12 @@
 		compatible = "simple-bus";
 		interrupt-parent = <&intcon>;
 
-		flash@30000000 {
+		flash: flash@30000000 {
 			compatible = "cortina,gemini-flash", "cfi-flash";
 			syscon = <&syscon>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pflash_default_pins>;
 			bank-width = <2>;
-			#address-cells = <1>;
-			#size-cells = <1>;
 			status = "disabled";
 		};
 
@@ -289,9 +287,28 @@
 			device_type = "pci";
 			#address-cells = <3>;
 			#size-cells = <2>;
-			#interrupt-cells = <1>;
 			status = "disabled";
 
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+				<0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
+				<0x4800 0 0 2 &pci_intc 1>,
+				<0x4800 0 0 3 &pci_intc 2>,
+				<0x4800 0 0 4 &pci_intc 3>,
+				<0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
+				<0x5000 0 0 2 &pci_intc 2>,
+				<0x5000 0 0 3 &pci_intc 3>,
+				<0x5000 0 0 4 &pci_intc 0>,
+				<0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
+				<0x5800 0 0 2 &pci_intc 3>,
+				<0x5800 0 0 3 &pci_intc 0>,
+				<0x5800 0 0 4 &pci_intc 1>,
+				<0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
+				<0x6000 0 0 2 &pci_intc 0>,
+				<0x6000 0 0 3 &pci_intc 1>,
+				<0x6000 0 0 4 &pci_intc 2>;
+
 			bus-range = <0x00 0xff>;
 			/* PCI ranges mappings */
 			ranges =
@@ -322,7 +339,7 @@
 			};
 		};
 
-		ethernet@60000000 {
+		ethernet: ethernet@60000000 {
 			compatible = "cortina,gemini-ethernet";
 			reg = <0x60000000 0x4000>, /* Global registers, queue */
 			      <0x60004000 0x2000>, /* V-bit */
@@ -365,7 +382,7 @@
 			clocks = <&syscon GEMINI_CLK_GATE_SECURITY>;
 		};
 
-		ide@63000000 {
+		ide0: ide@63000000 {
 			compatible = "cortina,gemini-pata", "faraday,ftide010";
 			reg = <0x63000000 0x1000>;
 			interrupts = <4 IRQ_TYPE_EDGE_RISING>;
@@ -378,7 +395,7 @@
 			#size-cells = <0>;
 		};
 
-		ide@63400000 {
+		ide1: ide@63400000 {
 			compatible = "cortina,gemini-pata", "faraday,ftide010";
 			reg = <0x63400000 0x1000>;
 			interrupts = <5 IRQ_TYPE_EDGE_RISING>;
@@ -421,8 +438,8 @@
 			status = "disabled";
 		};
 
-		usb@68000000 {
-			compatible = "cortina,gemini-usb", "faraday,fotg210";
+		usb0: usb@68000000 {
+			compatible = "cortina,gemini-usb", "faraday,fotg200";
 			reg = <0x68000000 0x1000>;
 			interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
 			resets = <&syscon GEMINI_RESET_USB0>;
@@ -438,12 +455,14 @@
 			 */
 			pinctrl-names = "default";
 			pinctrl-0 = <&usb_default_pins>;
+			/* Default to host mode */
+			dr_mode = "host";
 			syscon = <&syscon>;
 			status = "disabled";
 		};
 
-		usb@69000000 {
-			compatible = "cortina,gemini-usb", "faraday,fotg210";
+		usb1: usb@69000000 {
+			compatible = "cortina,gemini-usb", "faraday,fotg200";
 			reg = <0x69000000 0x1000>;
 			interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
 			resets = <&syscon GEMINI_RESET_USB1>;
diff --git a/arch/arm/boot/dts/hisilicon/Makefile b/arch/arm/boot/dts/hisilicon/Makefile
new file mode 100644
index 000000000000..5ce0512c0010
--- /dev/null
+++ b/arch/arm/boot/dts/hisilicon/Makefile
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_HI3xxx) += \
+	hi3620-hi4511.dtb
+dtb-$(CONFIG_ARCH_HIP01) += \
+	hip01-ca9x2.dtb
+dtb-$(CONFIG_ARCH_HIP04) += \
+	hip04-d01.dtb
+dtb-$(CONFIG_ARCH_HISI) += \
+	hi3519-demb.dtb
+dtb-$(CONFIG_ARCH_HIX5HD2) += \
+	hisi-x5hd2-dkb.dtb
+dtb-$(CONFIG_ARCH_SD5203) += \
+	sd5203.dtb
diff --git a/arch/arm/boot/dts/hi3519-demb.dts b/arch/arm/boot/dts/hisilicon/hi3519-demb.dts
index f473fa22e9ce..f473fa22e9ce 100644
--- a/arch/arm/boot/dts/hi3519-demb.dts
+++ b/arch/arm/boot/dts/hisilicon/hi3519-demb.dts
diff --git a/arch/arm/boot/dts/hi3519.dtsi b/arch/arm/boot/dts/hisilicon/hi3519.dtsi
index c524c854d319..a42b71cdc5d7 100644
--- a/arch/arm/boot/dts/hi3519.dtsi
+++ b/arch/arm/boot/dts/hisilicon/hi3519.dtsi
@@ -54,7 +54,7 @@
 			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&crg HI3519_UART0_CLK>, <&crg HI3519_UART0_CLK>;
 			clock-names = "uartclk", "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		uart1: serial@12101000 {
@@ -63,7 +63,7 @@
 			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&crg HI3519_UART1_CLK>, <&crg HI3519_UART1_CLK>;
 			clock-names = "uartclk", "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		uart2: serial@12102000 {
@@ -72,7 +72,7 @@
 			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&crg HI3519_UART2_CLK>, <&crg HI3519_UART2_CLK>;
 			clock-names = "uartclk", "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		uart3: serial@12103000 {
@@ -81,7 +81,7 @@
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&crg HI3519_UART3_CLK>, <&crg HI3519_UART3_CLK>;
 			clock-names = "uartclk", "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		uart4: serial@12104000 {
@@ -90,7 +90,7 @@
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&crg HI3519_UART4_CLK>, <&crg HI3519_UART4_CLK>;
 			clock-names = "uartclk", "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		dual_timer0: timer@12000000 {
@@ -100,7 +100,7 @@
 			reg = <0x12000000 0x1000>;
 			clocks = <&clk_3m>;
 			clock-names = "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		dual_timer1: timer@12001000 {
@@ -110,7 +110,7 @@
 			reg = <0x12001000 0x1000>;
 			clocks = <&clk_3m>;
 			clock-names = "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		dual_timer2: timer@12002000 {
@@ -120,7 +120,7 @@
 			reg = <0x12002000 0x1000>;
 			clocks = <&clk_3m>;
 			clock-names = "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		spi_bus0: spi@12120000 {
@@ -132,7 +132,7 @@
 			num-cs = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			status = "disable";
+			status = "disabled";
 		};
 
 		spi_bus1: spi@12121000 {
@@ -144,7 +144,7 @@
 			num-cs = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			status = "disable";
+			status = "disabled";
 		};
 
 		spi_bus2: spi@12122000 {
@@ -156,7 +156,7 @@
 			num-cs = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			status = "disable";
+			status = "disabled";
 		};
 
 		sysctrl: system-controller@12020000 {
diff --git a/arch/arm/boot/dts/hi3620-hi4511.dts b/arch/arm/boot/dts/hisilicon/hi3620-hi4511.dts
index ce356c469e1e..f1c816a1d7cf 100644
--- a/arch/arm/boot/dts/hi3620-hi4511.dts
+++ b/arch/arm/boot/dts/hisilicon/hi3620-hi4511.dts
@@ -24,161 +24,161 @@
 
 	amba-bus {
 		dual_timer0: dual_timer@800000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		uart0: serial@b00000 {	/* console */
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>;
 			pinctrl-1 = <&uart0_pmx_idle &uart0_cfg_idle>;
-			status = "ok";
+			status = "okay";
 		};
 
 		uart1: serial@b01000 { /* modem */
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func>;
 			pinctrl-1 = <&uart1_pmx_idle &uart1_cfg_idle>;
-			status = "ok";
+			status = "okay";
 		};
 
 		uart2: serial@b02000 { /* audience */
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>;
 			pinctrl-1 = <&uart2_pmx_idle &uart2_cfg_idle>;
-			status = "ok";
+			status = "okay";
 		};
 
 		uart3: serial@b03000 {
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>;
 			pinctrl-1 = <&uart3_pmx_idle &uart3_cfg_idle>;
-			status = "ok";
+			status = "okay";
 		};
 
 		uart4: serial@b04000 {
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>;
 			pinctrl-1 = <&uart4_pmx_idle &uart4_cfg_func>;
-			status = "ok";
+			status = "okay";
 		};
 
 		pmx0: pinmux@803000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&board_pmx_pins>;
 
-			board_pmx_pins: board_pmx_pins {
+			board_pmx_pins: board-pins {
 				pinctrl-single,pins = <
 					0x008 0x0	/* GPIO -- eFUSE_DOUT */
 					0x100 0x0	/* USIM_CLK & USIM_DATA (IOMG63) */
 				>;
 			};
-			uart0_pmx_func: uart0_pmx_func {
+			uart0_pmx_func: uart0-pins {
 				pinctrl-single,pins = <
 					0x0f0 0x0
 					0x0f4 0x0	/* UART0_RX & UART0_TX */
 				>;
 			};
-			uart0_pmx_idle: uart0_pmx_idle {
+			uart0_pmx_idle: uart0-idle-pins {
 				pinctrl-single,pins = <
 					/*0x0f0 0x1*/	/* UART0_CTS & UART0_RTS */
 					0x0f4 0x1	/* UART0_RX & UART0_TX */
 				>;
 			};
-			uart1_pmx_func: uart1_pmx_func {
+			uart1_pmx_func: uart1-pins {
 				pinctrl-single,pins = <
 					0x0f8 0x0	/* UART1_CTS & UART1_RTS (IOMG61) */
 					0x0fc 0x0	/* UART1_RX & UART1_TX (IOMG62) */
 				>;
 			};
-			uart1_pmx_idle: uart1_pmx_idle {
+			uart1_pmx_idle: uart1-idle-pins {
 				pinctrl-single,pins = <
 					0x0f8 0x1	/* GPIO (IOMG61) */
 					0x0fc 0x1	/* GPIO (IOMG62) */
 				>;
 			};
-			uart2_pmx_func: uart2_pmx_func {
+			uart2_pmx_func: uart2-pins {
 				pinctrl-single,pins = <
 					0x104 0x2	/* UART2_RXD (IOMG96) */
 					0x108 0x2	/* UART2_TXD (IOMG64) */
 				>;
 			};
-			uart2_pmx_idle: uart2_pmx_idle {
+			uart2_pmx_idle: uart2-idle-pins {
 				pinctrl-single,pins = <
 					0x104 0x1	/* GPIO (IOMG96) */
 					0x108 0x1	/* GPIO (IOMG64) */
 				>;
 			};
-			uart3_pmx_func: uart3_pmx_func {
+			uart3_pmx_func: uart3-pins {
 				pinctrl-single,pins = <
 					0x160 0x2	/* UART3_CTS & UART3_RTS (IOMG85) */
 					0x164 0x2	/* UART3_RXD & UART3_TXD (IOMG86) */
 				>;
 			};
-			uart3_pmx_idle: uart3_pmx_idle {
+			uart3_pmx_idle: uart3-idle-pins {
 				pinctrl-single,pins = <
 					0x160 0x1	/* GPIO (IOMG85) */
 					0x164 0x1	/* GPIO (IOMG86) */
 				>;
 			};
-			uart4_pmx_func: uart4_pmx_func {
+			uart4_pmx_func: uart4-pins {
 				pinctrl-single,pins = <
 					0x168 0x0	/* UART4_CTS & UART4_RTS (IOMG87) */
 					0x16c 0x0	/* UART4_RXD (IOMG88) */
 					0x170 0x0	/* UART4_TXD (IOMG93) */
 				>;
 			};
-			uart4_pmx_idle: uart4_pmx_idle {
+			uart4_pmx_idle: uart4-idle-pins {
 				pinctrl-single,pins = <
 					0x168 0x1	/* GPIO (IOMG87) */
 					0x16c 0x1	/* GPIO (IOMG88) */
 					0x170 0x1	/* GPIO (IOMG93) */
 				>;
 			};
-			i2c0_pmx_func: i2c0_pmx_func {
+			i2c0_pmx_func: i2c0-pins {
 				pinctrl-single,pins = <
 					0x0b4 0x0	/* I2C0_SCL & I2C0_SDA (IOMG45) */
 				>;
 			};
-			i2c0_pmx_idle: i2c0_pmx_idle {
+			i2c0_pmx_idle: i2c0-idle-pins {
 				pinctrl-single,pins = <
 					0x0b4 0x1	/* GPIO (IOMG45) */
 				>;
 			};
-			i2c1_pmx_func: i2c1_pmx_func {
+			i2c1_pmx_func: i2c1-pins {
 				pinctrl-single,pins = <
 					0x0b8 0x0	/* I2C1_SCL & I2C1_SDA (IOMG46) */
 				>;
 			};
-			i2c1_pmx_idle: i2c1_pmx_idle {
+			i2c1_pmx_idle: i2c1-idle-pins {
 				pinctrl-single,pins = <
 					0x0b8 0x1	/* GPIO (IOMG46) */
 				>;
 			};
-			i2c2_pmx_func: i2c2_pmx_func {
+			i2c2_pmx_func: i2c2-pins {
 				pinctrl-single,pins = <
 					0x068 0x0	/* I2C2_SCL (IOMG26) */
 					0x06c 0x0	/* I2C2_SDA (IOMG27) */
 				>;
 			};
-			i2c2_pmx_idle: i2c2_pmx_idle {
+			i2c2_pmx_idle: i2c2-idle-pins {
 				pinctrl-single,pins = <
 					0x068 0x1	/* GPIO (IOMG26) */
 					0x06c 0x1	/* GPIO (IOMG27) */
 				>;
 			};
-			i2c3_pmx_func: i2c3_pmx_func {
+			i2c3_pmx_func: i2c3-pins {
 				pinctrl-single,pins = <
 					0x050 0x2	/* I2C3_SCL (IOMG20) */
 					0x054 0x2	/* I2C3_SDA (IOMG21) */
 				>;
 			};
-			i2c3_pmx_idle: i2c3_pmx_idle {
+			i2c3_pmx_idle: i2c3-idle-pins {
 				pinctrl-single,pins = <
 					0x050 0x1	/* GPIO (IOMG20) */
 					0x054 0x1	/* GPIO (IOMG21) */
 				>;
 			};
-			spi0_pmx_func: spi0_pmx_func {
+			spi0_pmx_func: spi0-pins {
 				pinctrl-single,pins = <
 					0x0d4 0x0	/* SPI0_CLK/SPI0_DI/SPI0_DO (IOMG53) */
 					0x0d8 0x0	/* SPI0_CS0 (IOMG54) */
@@ -187,7 +187,7 @@
 					0x0e4 0x0	/* SPI0_CS3 (IOMG57) */
 				>;
 			};
-			spi0_pmx_idle: spi0_pmx_idle {
+			spi0_pmx_idle: spi0-idle-pins {
 				pinctrl-single,pins = <
 					0x0d4 0x1	/* GPIO (IOMG53) */
 					0x0d8 0x1	/* GPIO (IOMG54) */
@@ -196,21 +196,21 @@
 					0x0e4 0x1	/* GPIO (IOMG57) */
 				>;
 			};
-			spi1_pmx_func: spi1_pmx_func {
+			spi1_pmx_func: spi1-pins {
 				pinctrl-single,pins = <
 					0x184 0x0	/* SPI1_CLK/SPI1_DI (IOMG98) */
 					0x0e8 0x0	/* SPI1_DO (IOMG58) */
 					0x0ec 0x0	/* SPI1_CS (IOMG95) */
 				>;
 			};
-			spi1_pmx_idle: spi1_pmx_idle {
+			spi1_pmx_idle: spi1-idle-pins {
 				pinctrl-single,pins = <
 					0x184 0x1	/* GPIO (IOMG98) */
 					0x0e8 0x1	/* GPIO (IOMG58) */
 					0x0ec 0x1	/* GPIO (IOMG95) */
 				>;
 			};
-			kpc_pmx_func: kpc_pmx_func {
+			kpc_pmx_func: kpc-pins {
 				pinctrl-single,pins = <
 					0x12c 0x0	/* KEY_IN0 (IOMG73) */
 					0x130 0x0	/* KEY_IN1 (IOMG74) */
@@ -220,7 +220,7 @@
 					0x114 0x0	/* KEY_OUT2 (IOMG67) */
 				>;
 			};
-			kpc_pmx_idle: kpc_pmx_idle {
+			kpc_pmx_idle: kpc-idle-pins {
 				pinctrl-single,pins = <
 					0x12c 0x1	/* GPIO (IOMG73) */
 					0x130 0x1	/* GPIO (IOMG74) */
@@ -230,13 +230,13 @@
 					0x114 0x1	/* GPIO (IOMG67) */
 				>;
 			};
-			gpio_key_func: gpio_key_func {
+			gpio_key_func: gpio-key-pins {
 				pinctrl-single,pins = <
 					0x10c 0x1	/* KEY_OUT0/GPIO (IOMG65) */
 					0x130 0x1	/* KEY_IN1/GPIO (IOMG74) */
 				>;
 			};
-			emmc_pmx_func: emmc_pmx_func {
+			emmc_pmx_func: emmc-pins {
 				pinctrl-single,pins = <
 					0x030 0x2	/* eMMC_CMD/eMMC_CLK (IOMG12) */
 					0x018 0x0	/* NAND_CS3_N (IOMG6) */
@@ -245,7 +245,7 @@
 					0x02c 0x2	/* eMMC_DATA[0:7] (IOMG10) */
 				>;
 			};
-			emmc_pmx_idle: emmc_pmx_idle {
+			emmc_pmx_idle: emmc-idle-pins {
 				pinctrl-single,pins = <
 					0x030 0x0	/* GPIO (IOMG12) */
 					0x018 0x1	/* GPIO (IOMG6) */
@@ -254,19 +254,19 @@
 					0x02c 0x1	/* GPIO (IOMG10) */
 				>;
 			};
-			sd_pmx_func: sd_pmx_func {
+			sd_pmx_func: sd-pins {
 				pinctrl-single,pins = <
 					0x0bc 0x0	/* SD_CLK/SD_CMD/SD_DATA0/SD_DATA1/SD_DATA2 (IOMG47) */
 					0x0c0 0x0	/* SD_DATA3 (IOMG48) */
 				>;
 			};
-			sd_pmx_idle: sd_pmx_idle {
+			sd_pmx_idle: sd-idle-pins {
 				pinctrl-single,pins = <
 					0x0bc 0x1	/* GPIO (IOMG47) */
 					0x0c0 0x1	/* GPIO (IOMG48) */
 				>;
 			};
-			nand_pmx_func: nand_pmx_func {
+			nand_pmx_func: nand-pins {
 				pinctrl-single,pins = <
 					0x00c 0x0	/* NAND_ALE/NAND_CLE/.../NAND_DATA[0:7] (IOMG3) */
 					0x010 0x0	/* NAND_CS1_N (IOMG4) */
@@ -279,7 +279,7 @@
 					0x02c 0x0	/* NAND_DATA[8:15] (IOMG10) */
 				>;
 			};
-			nand_pmx_idle: nand_pmx_idle {
+			nand_pmx_idle: nand-idle-pins {
 				pinctrl-single,pins = <
 					0x00c 0x1	/* GPIO (IOMG3) */
 					0x010 0x1	/* GPIO (IOMG4) */
@@ -292,17 +292,17 @@
 					0x02c 0x1	/* GPIO (IOMG10) */
 				>;
 			};
-			sdio_pmx_func: sdio_pmx_func {
+			sdio_pmx_func: sdio-pins {
 				pinctrl-single,pins = <
 					0x0c4 0x0	/* SDIO_CLK/SDIO_CMD/SDIO_DATA[0:3] (IOMG49) */
 				>;
 			};
-			sdio_pmx_idle: sdio_pmx_idle {
+			sdio_pmx_idle: sdio-idle-pins {
 				pinctrl-single,pins = <
 					0x0c4 0x1	/* GPIO (IOMG49) */
 				>;
 			};
-			audio_out_pmx_func: audio_out_pmx_func {
+			audio_out_pmx_func: audio-out-pins {
 				pinctrl-single,pins = <
 					0x0f0 0x1	/* GPIO (IOMG59), audio spk & earphone */
 				>;
@@ -314,7 +314,7 @@
 			pinctrl-0 = <	&board_pu_pins &board_pd_pins &board_pd_ps_pins
 					&board_np_pins &board_ps_pins &kpc_cfg_func
 					&audio_out_cfg_func>;
-			board_pu_pins: board_pu_pins {
+			board_pu_pins: board-pu-pins {
 				pinctrl-single,pins = <
 					0x014 0		/* GPIO_158 (IOCFG2) */
 					0x018 0		/* GPIO_159 (IOCFG3) */
@@ -324,7 +324,7 @@
 				pinctrl-single,bias-pulldown = <0 2 0 2>;
 				pinctrl-single,bias-pullup = <1 1 0 1>;
 			};
-			board_pd_pins: board_pd_pins {
+			board_pd_pins: board-pd-pins {
 				pinctrl-single,pins = <
 					0x038 0		/* eFUSE_DOUT (IOCFG11) */
 					0x150 0		/* ISP_GPIO8 (IOCFG93) */
@@ -333,7 +333,7 @@
 				pinctrl-single,bias-pulldown = <2 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 			};
-			board_pd_ps_pins: board_pd_ps_pins {
+			board_pd_ps_pins: board-pd-ps-pins {
 				pinctrl-single,pins = <
 					0x2d8 0		/* CLK_OUT0 (IOCFG190) */
 					0x004 0		/* PMU_SPI_DATA (IOCFG192) */
@@ -342,21 +342,21 @@
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			board_np_pins: board_np_pins {
+			board_np_pins: board-np-pins {
 				pinctrl-single,pins = <
 					0x24c 0		/* KEYPAD_OUT7 (IOCFG155) */
 				>;
 				pinctrl-single,bias-pulldown = <0 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 			};
-			board_ps_pins: board_ps_pins {
+			board_ps_pins: board-ps-pins {
 				pinctrl-single,pins = <
 					0x000 0		/* PMU_SPI_CLK (IOCFG191) */
 					0x008 0		/* PMU_SPI_CS_N (IOCFG193) */
 				>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			uart0_cfg_func: uart0_cfg_func {
+			uart0_cfg_func: uart0-cfg-pins {
 				pinctrl-single,pins = <
 					0x208 0		/* UART0_RXD (IOCFG138) */
 					0x20c 0		/* UART0_TXD (IOCFG139) */
@@ -364,7 +364,7 @@
 				pinctrl-single,bias-pulldown = <0 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 			};
-			uart0_cfg_idle: uart0_cfg_idle {
+			uart0_cfg_idle: uart0-cfg-idle-pins {
 				pinctrl-single,pins = <
 					0x208 0		/* UART0_RXD (IOCFG138) */
 					0x20c 0		/* UART0_TXD (IOCFG139) */
@@ -372,7 +372,7 @@
 				pinctrl-single,bias-pulldown = <2 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 			};
-			uart1_cfg_func: uart1_cfg_func {
+			uart1_cfg_func: uart1-cfg-pins {
 				pinctrl-single,pins = <
 					0x210 0		/* UART1_CTS (IOCFG140) */
 					0x214 0		/* UART1_RTS (IOCFG141) */
@@ -382,7 +382,7 @@
 				pinctrl-single,bias-pulldown = <0 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 			};
-			uart1_cfg_idle: uart1_cfg_idle {
+			uart1_cfg_idle: uart1-cfg-idle-pins {
 				pinctrl-single,pins = <
 					0x210 0		/* UART1_CTS (IOCFG140) */
 					0x214 0		/* UART1_RTS (IOCFG141) */
@@ -392,7 +392,7 @@
 				pinctrl-single,bias-pulldown = <2 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 			};
-			uart2_cfg_func: uart2_cfg_func {
+			uart2_cfg_func: uart2-cfg-pins {
 				pinctrl-single,pins = <
 					0x220 0		/* UART2_CTS (IOCFG144) */
 					0x224 0		/* UART2_RTS (IOCFG145) */
@@ -402,7 +402,7 @@
 				pinctrl-single,bias-pulldown = <0 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 			};
-			uart2_cfg_idle: uart2_cfg_idle {
+			uart2_cfg_idle: uart2-cfg-idle-pins {
 				pinctrl-single,pins = <
 					0x220 0		/* GPIO (IOCFG144) */
 					0x224 0		/* GPIO (IOCFG145) */
@@ -412,7 +412,7 @@
 				pinctrl-single,bias-pulldown = <2 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 			};
-			uart3_cfg_func: uart3_cfg_func {
+			uart3_cfg_func: uart3-cfg-pins {
 				pinctrl-single,pins = <
 					0x294 0		/* UART3_CTS (IOCFG173) */
 					0x298 0		/* UART3_RTS (IOCFG174) */
@@ -422,7 +422,7 @@
 				pinctrl-single,bias-pulldown = <0 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 			};
-			uart3_cfg_idle: uart3_cfg_idle {
+			uart3_cfg_idle: uart3-cfg-idle-pins {
 				pinctrl-single,pins = <
 					0x294 0		/* UART3_CTS (IOCFG173) */
 					0x298 0		/* UART3_RTS (IOCFG174) */
@@ -432,7 +432,7 @@
 				pinctrl-single,bias-pulldown = <2 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 			};
-			uart4_cfg_func: uart4_cfg_func {
+			uart4_cfg_func: uart4-cfg-pins {
 				pinctrl-single,pins = <
 					0x2a4 0		/* UART4_CTS (IOCFG177) */
 					0x2a8 0		/* UART4_RTS (IOCFG178) */
@@ -442,7 +442,7 @@
 				pinctrl-single,bias-pulldown = <0 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 			};
-			i2c0_cfg_func: i2c0_cfg_func {
+			i2c0_cfg_func: i2c0-cfg-pins {
 				pinctrl-single,pins = <
 					0x17c 0		/* I2C0_SCL (IOCFG103) */
 					0x180 0		/* I2C0_SDA (IOCFG104) */
@@ -451,7 +451,7 @@
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			i2c1_cfg_func: i2c1_cfg_func {
+			i2c1_cfg_func: i2c1-cfg-pins {
 				pinctrl-single,pins = <
 					0x184 0		/* I2C1_SCL (IOCFG105) */
 					0x188 0		/* I2C1_SDA (IOCFG106) */
@@ -460,7 +460,7 @@
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			i2c2_cfg_func: i2c2_cfg_func {
+			i2c2_cfg_func: i2c2-cfg-pins {
 				pinctrl-single,pins = <
 					0x118 0		/* I2C2_SCL (IOCFG79) */
 					0x11c 0		/* I2C2_SDA (IOCFG80) */
@@ -469,7 +469,7 @@
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			i2c3_cfg_func: i2c3_cfg_func {
+			i2c3_cfg_func: i2c3-cfg-pins {
 				pinctrl-single,pins = <
 					0x100 0		/* I2C3_SCL (IOCFG73) */
 					0x104 0		/* I2C3_SDA (IOCFG74) */
@@ -478,7 +478,7 @@
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			spi0_cfg_func1: spi0_cfg_func1 {
+			spi0_cfg_func1: spi0-cfg-func1-pins {
 				pinctrl-single,pins = <
 					0x1d4 0		/* SPI0_CLK (IOCFG125) */
 					0x1d8 0		/* SPI0_DI (IOCFG126) */
@@ -488,7 +488,7 @@
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			spi0_cfg_func2: spi0_cfg_func2 {
+			spi0_cfg_func2: spi0-cfg-func2-pins {
 				pinctrl-single,pins = <
 					0x1e0 0		/* SPI0_CS0 (IOCFG128) */
 					0x1e4 0		/* SPI0_CS1 (IOCFG129) */
@@ -499,7 +499,7 @@
 				pinctrl-single,bias-pullup = <1 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			spi1_cfg_func1: spi1_cfg_func1 {
+			spi1_cfg_func1: spi1-cfg-func1-pins {
 				pinctrl-single,pins = <
 					0x1f0 0		/* SPI1_CLK (IOCFG132) */
 					0x1f4 0		/* SPI1_DI (IOCFG133) */
@@ -509,7 +509,7 @@
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			spi1_cfg_func2: spi1_cfg_func2 {
+			spi1_cfg_func2: spi1-cfg-func2-pins {
 				pinctrl-single,pins = <
 					0x1fc 0		/* SPI1_CS (IOCFG135) */
 				>;
@@ -517,7 +517,7 @@
 				pinctrl-single,bias-pullup = <1 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			kpc_cfg_func: kpc_cfg_func {
+			kpc_cfg_func: kpc-cfg-pins {
 				pinctrl-single,pins = <
 					0x250 0		/* KEY_IN0 (IOCFG156) */
 					0x254 0		/* KEY_IN1 (IOCFG157) */
@@ -529,7 +529,7 @@
 				pinctrl-single,bias-pulldown = <2 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 			};
-			emmc_cfg_func: emmc_cfg_func {
+			emmc_cfg_func: emmc-cfg-pins {
 				pinctrl-single,pins = <
 					0x0ac 0		/* eMMC_CMD (IOCFG40) */
 					0x0b0 0		/* eMMC_CLK (IOCFG41) */
@@ -549,7 +549,7 @@
 				pinctrl-single,bias-pullup = <1 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			sd_cfg_func1: sd_cfg_func1 {
+			sd_cfg_func1: sd-cfg-func1-pins {
 				pinctrl-single,pins = <
 					0x18c 0		/* SD_CLK (IOCFG107) */
 					0x190 0		/* SD_CMD (IOCFG108) */
@@ -558,7 +558,7 @@
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			sd_cfg_func2: sd_cfg_func2 {
+			sd_cfg_func2: sd-cfg-func2-pins {
 				pinctrl-single,pins = <
 					0x194 0		/* SD_DATA0 (IOCFG109) */
 					0x198 0		/* SD_DATA1 (IOCFG110) */
@@ -569,7 +569,7 @@
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 				pinctrl-single,drive-strength = <0x70 0xf0>;
 			};
-			nand_cfg_func1: nand_cfg_func1 {
+			nand_cfg_func1: nand-cfg-func1-pins {
 				pinctrl-single,pins = <
 					0x03c 0		/* NAND_ALE (IOCFG12) */
 					0x040 0		/* NAND_CLE (IOCFG13) */
@@ -594,7 +594,7 @@
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			nand_cfg_func2: nand_cfg_func2 {
+			nand_cfg_func2: nand-cfg-func2-pins {
 				pinctrl-single,pins = <
 					0x044 0		/* NAND_RE_N (IOCFG14) */
 					0x048 0		/* NAND_WE_N (IOCFG15) */
@@ -611,7 +611,7 @@
 				pinctrl-single,bias-pullup = <1 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			sdio_cfg_func: sdio_cfg_func {
+			sdio_cfg_func: sdio-cfg-pins {
 				pinctrl-single,pins = <
 					0x1a4 0		/* SDIO0_CLK (IOCG113) */
 					0x1a8 0		/* SDIO0_CMD (IOCG114) */
@@ -624,7 +624,7 @@
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			audio_out_cfg_func: audio_out_cfg_func {
+			audio_out_cfg_func: audio-out-cfg-pins {
 				pinctrl-single,pins = <
 					0x200 0		/* GPIO (IOCFG136) */
 					0x204 0		/* GPIO (IOCFG137) */
diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hisilicon/hi3620.dtsi
index cf48ec14af43..a254ec009296 100644
--- a/arch/arm/boot/dts/hi3620.dtsi
+++ b/arch/arm/boot/dts/hisilicon/hi3620.dtsi
@@ -545,10 +545,9 @@
 			compatible = "pinctrl-single";
 			reg = <0x803000 0x188>;
 			#address-cells = <1>;
-			#size-cells = <1>;
+			#size-cells = <0>;
 			#pinctrl-cells = <1>;
 			#gpio-range-cells = <3>;
-			ranges;
 
 			pinctrl-single,register-width = <32>;
 			pinctrl-single,function-mask = <7>;
@@ -567,9 +566,8 @@
 			compatible = "pinconf-single";
 			reg = <0x803800 0x2dc>;
 			#address-cells = <1>;
-			#size-cells = <1>;
+			#size-cells = <0>;
 			#pinctrl-cells = <1>;
-			ranges;
 
 			pinctrl-single,register-width = <32>;
 		};
diff --git a/arch/arm/boot/dts/hip01-ca9x2.dts b/arch/arm/boot/dts/hisilicon/hip01-ca9x2.dts
index f3faf247cd61..f3faf247cd61 100644
--- a/arch/arm/boot/dts/hip01-ca9x2.dts
+++ b/arch/arm/boot/dts/hisilicon/hip01-ca9x2.dts
diff --git a/arch/arm/boot/dts/hip01.dtsi b/arch/arm/boot/dts/hisilicon/hip01.dtsi
index e17f36bd9006..e17f36bd9006 100644
--- a/arch/arm/boot/dts/hip01.dtsi
+++ b/arch/arm/boot/dts/hisilicon/hip01.dtsi
diff --git a/arch/arm/boot/dts/hip04-d01.dts b/arch/arm/boot/dts/hisilicon/hip04-d01.dts
index f5691dbc26d2..0210064bf6a5 100644
--- a/arch/arm/boot/dts/hip04-d01.dts
+++ b/arch/arm/boot/dts/hisilicon/hip04-d01.dts
@@ -23,7 +23,7 @@
 
 	soc {
 		uart0: serial@4007000 {
-			status = "ok";
+			status = "okay";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hisilicon/hip04.dtsi
index 2424cc545c9c..2424cc545c9c 100644
--- a/arch/arm/boot/dts/hip04.dtsi
+++ b/arch/arm/boot/dts/hisilicon/hip04.dtsi
diff --git a/arch/arm/boot/dts/hisi-x5hd2-dkb.dts b/arch/arm/boot/dts/hisilicon/hisi-x5hd2-dkb.dts
index 7758c19038f0..7758c19038f0 100644
--- a/arch/arm/boot/dts/hisi-x5hd2-dkb.dts
+++ b/arch/arm/boot/dts/hisilicon/hisi-x5hd2-dkb.dts
diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisilicon/hisi-x5hd2.dtsi
index dc991ba2a9fb..dc991ba2a9fb 100644
--- a/arch/arm/boot/dts/hisi-x5hd2.dtsi
+++ b/arch/arm/boot/dts/hisilicon/hisi-x5hd2.dtsi
diff --git a/arch/arm/boot/dts/sd5203.dts b/arch/arm/boot/dts/hisilicon/sd5203.dts
index a61a078ea042..69381819e07b 100644
--- a/arch/arm/boot/dts/sd5203.dts
+++ b/arch/arm/boot/dts/hisilicon/sd5203.dts
@@ -15,7 +15,7 @@
 	#size-cells = <1>;
 
 	chosen {
-		bootargs="console=ttyS0,9600 earlycon=uart8250,mmio32,0x1600d000";
+		bootargs = "console=ttyS0,9600 earlycon=uart8250,mmio32,0x1600d000";
 	};
 
 	aliases {
diff --git a/arch/arm/boot/dts/hpe/Makefile b/arch/arm/boot/dts/hpe/Makefile
new file mode 100644
index 000000000000..e175b1732cdb
--- /dev/null
+++ b/arch/arm/boot/dts/hpe/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_HPE_GXP) += \
+	hpe-bmc-dl360gen10.dtb
diff --git a/arch/arm/boot/dts/hpe/hpe-bmc-dl360gen10.dts b/arch/arm/boot/dts/hpe/hpe-bmc-dl360gen10.dts
new file mode 100644
index 000000000000..3a7382ce40ef
--- /dev/null
+++ b/arch/arm/boot/dts/hpe/hpe-bmc-dl360gen10.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for HPE DL360Gen10
+ */
+
+/include/ "hpe-gxp.dtsi"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "hpe,gxp-dl360gen10", "hpe,gxp";
+	model = "Hewlett Packard Enterprise ProLiant dl360 Gen10";
+
+	aliases {
+		serial0 = &uartc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x20000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/hpe/hpe-gxp.dtsi b/arch/arm/boot/dts/hpe/hpe-gxp.dtsi
new file mode 100644
index 000000000000..cf735b3c4f35
--- /dev/null
+++ b/arch/arm/boot/dts/hpe/hpe-gxp.dtsi
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for HPE GXP
+ */
+
+/dts-v1/;
+/ {
+	model = "Hewlett Packard Enterprise GXP BMC";
+	compatible = "hpe,gxp";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			device_type = "cpu";
+			next-level-cache = <&L2>;
+		};
+	};
+
+	clocks {
+		pll: clock-0 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1600000000>;
+		};
+
+		iopclk: clock-1 {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <4>;
+			clock-mult = <1>;
+			clocks = <&pll>;
+		};
+	};
+
+	axi {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		dma-ranges;
+
+		L2: cache-controller@b0040000 {
+			compatible = "arm,pl310-cache";
+			reg = <0xb0040000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		ahb@c0000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc0000000 0x30000000>;
+			dma-ranges;
+
+			vic0: interrupt-controller@eff0000 {
+				compatible = "arm,pl192-vic";
+				reg = <0xeff0000 0x1000>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+
+			vic1: interrupt-controller@80f00000 {
+				compatible = "arm,pl192-vic";
+				reg = <0x80f00000 0x1000>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+
+			uarta: serial@e0 {
+				compatible = "ns16550a";
+				reg = <0xe0 0x8>;
+				interrupts = <17>;
+				interrupt-parent = <&vic0>;
+				clock-frequency = <1846153>;
+				reg-shift = <0>;
+			};
+
+			uartb: serial@e8 {
+				compatible = "ns16550a";
+				reg = <0xe8 0x8>;
+				interrupts = <18>;
+				interrupt-parent = <&vic0>;
+				clock-frequency = <1846153>;
+				reg-shift = <0>;
+			};
+
+			uartc: serial@f0 {
+				compatible = "ns16550a";
+				reg = <0xf0 0x8>;
+				interrupts = <19>;
+				interrupt-parent = <&vic0>;
+				clock-frequency = <1846153>;
+				reg-shift = <0>;
+			};
+
+			usb0: usb@efe0000 {
+				compatible = "hpe,gxp-ehci", "generic-ehci";
+				reg = <0xefe0000 0x100>;
+				interrupts = <7>;
+				interrupt-parent = <&vic0>;
+			};
+
+			st: timer@80 {
+				compatible = "hpe,gxp-timer";
+				reg = <0x80 0x16>;
+				interrupts = <0>;
+				interrupt-parent = <&vic0>;
+				clocks = <&iopclk>;
+				clock-names = "iop";
+			};
+
+			usb1: usb@efe0100 {
+				compatible = "hpe,gxp-ohci", "generic-ohci";
+				reg = <0xefe0100 0x110>;
+				interrupts = <6>;
+				interrupt-parent = <&vic0>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
deleted file mode 100644
index 7d4301b22b90..000000000000
--- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
+++ /dev/null
@@ -1,65 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- */
-
-#include "imx25-eukrea-mbimxsd25-baseboard.dts"
-
-/ {
-	model = "Eukrea MBIMXSD25 with the CMO-QVGA Display";
-	compatible = "eukrea,mbimxsd25-baseboard-cmo-qvga", "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
-
-	cmo_qvga: display {
-		model = "CMO-QVGA";
-		bits-per-pixel = <16>;
-		fsl,pcr = <0xcad08b80>;
-		bus-width = <18>;
-		display-timings {
-			native-mode = <&qvga_timings>;
-			qvga_timings: 320x240 {
-				clock-frequency = <6500000>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <30>;
-				hfront-porch = <38>;
-				vback-porch = <20>;
-				vfront-porch = <3>;
-				hsync-len = <15>;
-				vsync-len = <4>;
-			};
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_lcd_3v3: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
-			regulator-name = "lcd-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-	};
-};
-
-&iomuxc {
-	imx25-eukrea-mbimxsd25-baseboard-cmo-qvga {
-		pinctrl_reg_lcd_3v3: reg_lcd_3v3 {
-			fsl,pins = <MX25_PAD_PWM__GPIO_1_26 0x80000000>;
-		};
-	};
-};
-
-&lcdc {
-	display = <&cmo_qvga>;
-	fsl,lpccr = <0x00a903ff>;
-	lcd-supply = <&reg_lcd_3v3>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx25-karo-tx25.dts b/arch/arm/boot/dts/imx25-karo-tx25.dts
deleted file mode 100644
index 0950eb66d3d9..000000000000
--- a/arch/arm/boot/dts/imx25-karo-tx25.dts
+++ /dev/null
@@ -1,108 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 Sascha Hauer, Pengutronix
- */
-
-/dts-v1/;
-#include "imx25.dtsi"
-
-/ {
-	model = "Ka-Ro TX25";
-	compatible = "karo,imx25-tx25", "fsl,imx25";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_fec_phy: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "fec-phy";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio4 9 0>;
-			enable-active-high;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x02000000 0x90000000 0x02000000>;
-	};
-};
-
-&iomuxc {
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX25_PAD_UART1_TXD__UART1_TXD 0x80000000
-			MX25_PAD_UART1_RXD__UART1_RXD 0x80000000
-			MX25_PAD_UART1_CTS__UART1_CTS 0x80000000
-			MX25_PAD_UART1_RTS__UART1_RTS 0x80000000
-		>;
-	};
-
-	pinctrl_fec: fecgrp {
-		fsl,pins = <
-			MX25_PAD_D11__GPIO_4_9		0x80000000 /* FEC PHY power on pin */
-			MX25_PAD_D13__GPIO_4_7		0x80000000 /* FEC reset */
-			MX25_PAD_FEC_MDC__FEC_MDC	0x80000000
-			MX25_PAD_FEC_MDIO__FEC_MDIO	0x80000000
-			MX25_PAD_FEC_TDATA0__FEC_TDATA0	0x80000000
-			MX25_PAD_FEC_TDATA1__FEC_TDATA1	0x80000000
-			MX25_PAD_FEC_TX_EN__FEC_TX_EN	0x80000000
-			MX25_PAD_FEC_RDATA0__FEC_RDATA0	0x80000000
-			MX25_PAD_FEC_RDATA1__FEC_RDATA1	0x80000000
-			MX25_PAD_FEC_RX_DV__FEC_RX_DV	0x80000000
-			MX25_PAD_FEC_TX_CLK__FEC_TX_CLK	0x80000000
-		>;
-	};
-
-	pinctrl_nfc: nfcgrp {
-		fsl,pins = <
-			MX25_PAD_NF_CE0__NF_CE0		0x80000000
-			MX25_PAD_NFWE_B__NFWE_B		0x80000000
-			MX25_PAD_NFRE_B__NFRE_B		0x80000000
-			MX25_PAD_NFALE__NFALE		0x80000000
-			MX25_PAD_NFCLE__NFCLE		0x80000000
-			MX25_PAD_NFWP_B__NFWP_B		0x80000000
-			MX25_PAD_NFRB__NFRB		0x80000000
-			MX25_PAD_D7__D7			0x80000000
-			MX25_PAD_D6__D6			0x80000000
-			MX25_PAD_D5__D5			0x80000000
-			MX25_PAD_D4__D4			0x80000000
-			MX25_PAD_D3__D3			0x80000000
-			MX25_PAD_D2__D2			0x80000000
-			MX25_PAD_D1__D1			0x80000000
-			MX25_PAD_D0__D0			0x80000000
-		>;
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-reset-gpios = <&gpio3 7 GPIO_ACTIVE_LOW>;
-	phy-mode = "rmii";
-	phy-supply = <&reg_fec_phy>;
-	status = "okay";
-};
-
-&nfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nfc>;
-	nand-on-flash-bbt;
-	nand-ecc-mode = "hw";
-	nand-bus-width = <8>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi
deleted file mode 100644
index 303f920201c5..000000000000
--- a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi
+++ /dev/null
@@ -1,97 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 Sascha Hauer, Uwe Kleine-König, Steffen Trumtrar
- * and Markus Pargmann, Pengutronix
- */
-
-/dts-v1/;
-#include "imx27.dtsi"
-
-/ {
-	model = "Phytec pca100";
-	compatible = "phytec,imx27-pca100", "fsl,imx27";
-
-	memory@a0000000 {
-		device_type = "memory";
-		reg = <0xa0000000 0x08000000>; /* 128MB */
-	};
-};
-
-&cspi1 {
-	cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>,
-		   <&gpio4 27 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec1>;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	at24@52 {
-		compatible = "atmel,24c32";
-		pagesize = <32>;
-		reg = <0x52>;
-	};
-};
-
-&iomuxc {
-	imx27-phycard-s-som {
-		pinctrl_fec1: fec1grp {
-			fsl,pins = <
-				MX27_PAD_SD3_CMD__FEC_TXD0 0x0
-				MX27_PAD_SD3_CLK__FEC_TXD1 0x0
-				MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
-				MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
-				MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
-				MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
-				MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
-				MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
-				MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
-				MX27_PAD_ATA_DATA7__FEC_MDC 0x0
-				MX27_PAD_ATA_DATA8__FEC_CRS 0x0
-				MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
-				MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
-				MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
-				MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
-				MX27_PAD_ATA_DATA13__FEC_COL 0x0
-				MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
-				MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
-				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
-			>;
-		};
-
-		pinctrl_nfc: nfcgrp {
-			fsl,pins = <
-				MX27_PAD_NFRB__NFRB 0x0
-				MX27_PAD_NFCLE__NFCLE 0x0
-				MX27_PAD_NFWP_B__NFWP_B 0x0
-				MX27_PAD_NFCE_B__NFCE_B 0x0
-				MX27_PAD_NFALE__NFALE 0x0
-				MX27_PAD_NFRE_B__NFRE_B 0x0
-				MX27_PAD_NFWE_B__NFWE_B 0x0
-			>;
-		};
-	};
-};
-
-&nfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nfc>;
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx28-apf28.dts b/arch/arm/boot/dts/imx28-apf28.dts
deleted file mode 100644
index 14a92fe59770..000000000000
--- a/arch/arm/boot/dts/imx28-apf28.dts
+++ /dev/null
@@ -1,80 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 Armadeus Systems - <support@armadeus.com>
- */
-
-/dts-v1/;
-#include "imx28.dtsi"
-
-/ {
-	model = "Armadeus Systems APF28 module";
-	compatible = "armadeus,imx28-apf28", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			nand-controller@8000c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
-				status = "okay";
-
-				partition@0 {
-					label = "u-boot";
-					reg = <0x0 0x300000>;
-				};
-
-				partition@300000 {
-					label = "env";
-					reg = <0x300000 0x80000>;
-				};
-
-				partition@380000 {
-					label = "env2";
-					reg = <0x380000 0x80000>;
-				};
-
-				partition@400000 {
-					label = "dtb";
-					reg = <0x400000 0x80000>;
-				};
-
-				partition@480000 {
-					label = "splash";
-					reg = <0x480000 0x80000>;
-				};
-
-				partition@500000 {
-					label = "kernel";
-					reg = <0x500000 0x800000>;
-				};
-
-				partition@d00000 {
-					label = "rootfs";
-					reg = <0xd00000 0xf300000>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
-			status = "okay";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts
deleted file mode 100644
index 1b253b47006c..000000000000
--- a/arch/arm/boot/dts/imx28-apf28dev.dts
+++ /dev/null
@@ -1,225 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 Armadeus Systems - <support@armadeus.com>
- */
-
-/* APF28Dev is a docking board for the APF28 SOM */
-#include "imx28-apf28.dts"
-
-/ {
-	model = "Armadeus Systems APF28Dev docking/development board";
-	compatible = "armadeus,imx28-apf28dev", "armadeus,imx28-apf28", "fsl,imx28";
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <4>;
-				status = "okay";
-			};
-
-			ssp2: spi@80014000 {
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_apf28dev>;
-
-				hog_pins_apf28dev: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D16__GPIO_1_16
-						MX28_PAD_LCD_D17__GPIO_1_17
-						MX28_PAD_LCD_D18__GPIO_1_18
-						MX28_PAD_LCD_D19__GPIO_1_19
-						MX28_PAD_LCD_D20__GPIO_1_20
-						MX28_PAD_LCD_D21__GPIO_1_21
-						MX28_PAD_LCD_D22__GPIO_1_22
-						MX28_PAD_GPMI_CE1N__GPIO_0_17
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_apf28dev: lcdif-apf28dev@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				usb0_otg_apf28dev: otg-apf28dev@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D23__GPIO_1_23
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_16bit_pins_a
-						&lcdif_pins_apf28dev>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <16>;
-					bus-width = <16>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <33000033>;
-							hactive = <800>;
-							vactive = <480>;
-							hback-porch = <96>;
-							hfront-porch = <96>;
-							vback-porch = <20>;
-							vfront-porch = <21>;
-							hsync-len = <64>;
-							vsync-len = <4>;
-							hsync-active = <1>;
-							vsync-active = <1>;
-							de-active = <1>;
-							pixelclk-active = <0>;
-						};
-					};
-				};
-			};
-
-			can0: can@80032000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&can0_pins_a>;
-				xceiver-supply = <&reg_can0_vcc>;
-				status = "okay";
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				fsl,lradc-touchscreen-wires = <4>;
-				status = "okay";
-			};
-
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_a &pwm4_pins_a>;
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				uart-has-rtscts;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb0_otg_apf28dev
-					&usb0_id_pins_b>;
-			vbus-supply = <&reg_usb0_vbus>;
-			status = "okay";
-		};
-
-		usb1: usb@80090000 {
-			status = "okay";
-		};
-
-		mac1: ethernet@800f4000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac1_pins_a>;
-			phy-reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb0_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb0_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 23 1>;
-			enable-active-high;
-		};
-
-		reg_can0_vcc: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "can0_vcc";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		user {
-			label = "Heartbeat";
-			gpios = <&gpio0 21 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-
-		pwms = <&pwm 3 191000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		user-button {
-			label = "User button";
-			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
-			linux,code = <0x100>;
-			wakeup-source;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts
deleted file mode 100644
index b86be320496b..000000000000
--- a/arch/arm/boot/dts/imx28-apx4devkit.dts
+++ /dev/null
@@ -1,240 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-#include "imx28.dtsi"
-
-/ {
-	model = "Bluegiga APX4 Development Kit";
-	compatible = "bluegiga,apx4devkit", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x04000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			nand-controller@8000c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
-				status = "okay";
-			};
-
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>;
-				bus-width = <4>;
-				status = "okay";
-			};
-
-			ssp2: spi@80014000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc2_4bit_pins_apx4 &mmc2_sck_cfg_apx4>;
-				bus-width = <4>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_CE1N__GPIO_0_17
-						MX28_PAD_GPMI_RDY1__GPIO_0_21
-						MX28_PAD_SSP2_MISO__GPIO_2_18
-						MX28_PAD_SSP2_SS0__AUART3_TX /* was: 0x2131 - MX28_PAD_SSP2_SS0__GPIO_2_19 */
-						MX28_PAD_PWM3__GPIO_3_28
-						MX28_PAD_LCD_RESET__GPIO_3_30
-						MX28_PAD_JTAG_RTCK__GPIO_4_20
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_apx4: lcdif-apx4@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DATA4__SSP2_D0
-						MX28_PAD_SSP0_DATA5__SSP2_D3
-						MX28_PAD_SSP0_DATA6__SSP2_CMD
-						MX28_PAD_SSP0_DATA7__SSP2_SCK
-						MX28_PAD_SSP2_SS1__SSP2_D1
-						MX28_PAD_SSP2_SS2__SSP2_D2
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DATA7__SSP2_SCK
-					>;
-					fsl,drive-strength = <MXS_DRIVE_12mA>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-					     &lcdif_pins_apx4>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <24>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <30000000>;
-							hactive = <800>;
-							vactive = <480>;
-							hback-porch = <88>;
-							hfront-porch = <40>;
-							vback-porch = <32>;
-							vfront-porch = <13>;
-							hsync-len = <48>;
-							vsync-len = <3>;
-							hsync-active = <1>;
-							vsync-active = <1>;
-							de-active = <1>;
-							pixelclk-active = <0>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			saif0: saif@80042000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif0_pins_a>;
-				status = "okay";
-			};
-
-			saif1: saif@80046000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif1_pins_a>;
-				fsl,saif-master = <&saif0>;
-				status = "okay";
-			};
-
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-
-				sgtl5000: codec@a {
-					compatible = "fsl,sgtl5000";
-					reg = <0x0a>;
-					#sound-dai-cells = <0>;
-					VDDA-supply = <&reg_3p3v>;
-					VDDIO-supply = <&reg_3p3v>;
-					clocks = <&saif0>;
-				};
-
-				pcf8563: rtc@51 {
-					compatible = "phg,pcf8563";
-					reg = <0x51>;
-				};
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				status = "okay";
-			};
-
-			auart1: serial@8006c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart1_2pins_a>;
-				status = "okay";
-			};
-
-			auart2: serial@8006e000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart2_2pins_a>;
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&usb1_pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb1: usb@80090000 {
-		      status = "okay";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-
-	sound {
-		compatible = "bluegiga,apx4devkit-sgtl5000",
-			     "fsl,mxs-audio-sgtl5000";
-		model = "apx4devkit-sgtl5000";
-		saif-controllers = <&saif0 &saif1>;
-		audio-codec = <&sgtl5000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		user {
-			label = "Heartbeat";
-			gpios = <&gpio3 28 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts
deleted file mode 100644
index 85aa1cc3ff66..000000000000
--- a/arch/arm/boot/dts/imx28-cfa10036.dts
+++ /dev/null
@@ -1,140 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 Free Electrons
- */
-
-/dts-v1/;
-#include "imx28.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Crystalfontz CFA-10036 Board";
-	compatible = "crystalfontz,cfa10036", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				ssd1306_cfa10036: ssd1306-10036@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DATA7__GPIO_2_7
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins_cfa10036: leds-10036@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART1_RX__GPIO_3_4
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				usb0_otg_cfa10036: otg-10036@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_RDY0__USB0_ID
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mmc_pwr_cfa10036: mmc_pwr_cfa10036@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						0x31c3 /*
-						MX28_PAD_PWM3__GPIO_3_28 */
-					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
-				};
-
-			};
-
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				bus-width = <4>;
-				status = "okay";
-			};
-		};
-
-		apbx@80040000 {
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_b>;
-				status = "okay";
-			};
-
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_b>;
-				clock-frequency = <400000>;
-				status = "okay";
-
-				ssd1306: oled@3c {
-					compatible = "solomon,ssd1306fb-i2c";
-					pinctrl-names = "default";
-					pinctrl-0 = <&ssd1306_cfa10036>;
-					reg = <0x3c>;
-					reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
-					solomon,height = <32>;
-					solomon,width = <128>;
-					solomon,page-offset = <0>;
-					solomon,com-lrremap;
-					solomon,com-invdir;
-					solomon,com-offset = <32>;
-				};
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb0_otg_cfa10036>;
-			dr_mode = "peripheral";
-			phy_type = "utmi";
-			status = "okay";
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_cfa10036>;
-
-		power {
-			gpios = <&gpio3 4 1>;
-			default-state = "on";
-		};
-	};
-
-	reg_vddio_sd0: vddio-sd0 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&mmc_pwr_cfa10036>;
-		regulator-name = "vddio-sd0";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 28 0>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts
deleted file mode 100644
index a92b05ef390f..000000000000
--- a/arch/arm/boot/dts/imx28-cfa10049.dts
+++ /dev/null
@@ -1,428 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 Free Electrons
- */
-
-/*
- * The CFA-10049 is an expansion board for the CFA-10036 module, thus we
- * need to include the CFA-10036 DTS.
- */
-#include "imx28-cfa10036.dts"
-
-/ {
-	model = "Crystalfontz CFA-10049 Board";
-	compatible = "crystalfontz,cfa10049", "crystalfontz,cfa10036", "fsl,imx28";
-
-	i2cmux {
-		compatible = "i2c-mux-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2cmux_pins_cfa10049>;
-		mux-gpios = <&gpio1 22 0 &gpio1 23 0>;
-		i2c-parent = <&i2c1>;
-
-		i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			adc0: nau7802@2a {
-				compatible = "nuvoton,nau7802";
-				reg = <0x2a>;
-				nuvoton,vldo = <3000>;
-			};
-		};
-
-		i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			adc1: nau7802@2a {
-				compatible = "nuvoton,nau7802";
-				reg = <0x2a>;
-				nuvoton,vldo = <3000>;
-			};
-		};
-
-		i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-
-				adc2: nau7802@2a {
-				compatible = "nuvoton,nau7802";
-				reg = <0x2a>;
-				nuvoton,vldo = <3000>;
-			};
-		};
-
-		i2c@3 {
-			reg = <3>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			pca9555: pca9555@20 {
-				compatible = "nxp,pca9555";
-				pinctrl-names = "default";
-				pinctrl-0 = <&pca_pins_cfa10049>;
-				interrupt-parent = <&gpio2>;
-				interrupts = <19 0x2>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x20>;
-			};
-		};
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				usb_pins_cfa10049: usb-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				i2cmux_pins_cfa10049: i2cmux-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D22__GPIO_1_22
-						MX28_PAD_LCD_D23__GPIO_1_23
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_pins_cfa10049: mac0-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SS2__GPIO_2_21
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				pca_pins_cfa10049: pca-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SS0__GPIO_2_19
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				rotary_pins_cfa10049: rotary-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_I2C0_SCL__GPIO_3_24
-						MX28_PAD_I2C0_SDA__GPIO_3_25
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				rotary_btn_pins_cfa10049: rotary-btn-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SAIF1_SDATA0__GPIO_3_26
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				spi2_pins_cfa10049: spi2-cfa10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SCK__GPIO_2_16
-						MX28_PAD_SSP2_MOSI__GPIO_2_17
-						MX28_PAD_SSP2_MISO__GPIO_2_18
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				spi3_pins_cfa10049: spi3-cfa10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_RDN__GPIO_0_24
-						MX28_PAD_GPMI_RESETN__GPIO_0_28
-						MX28_PAD_GPMI_CE1N__GPIO_0_17
-						MX28_PAD_GPMI_ALE__GPIO_0_26
-						MX28_PAD_GPMI_CLE__GPIO_0_27
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				lcdif_18bit_pins_cfa10049: lcdif-18bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D00__LCD_D0
-						MX28_PAD_LCD_D01__LCD_D1
-						MX28_PAD_LCD_D02__LCD_D2
-						MX28_PAD_LCD_D03__LCD_D3
-						MX28_PAD_LCD_D04__LCD_D4
-						MX28_PAD_LCD_D05__LCD_D5
-						MX28_PAD_LCD_D06__LCD_D6
-						MX28_PAD_LCD_D07__LCD_D7
-						MX28_PAD_LCD_D08__LCD_D8
-						MX28_PAD_LCD_D09__LCD_D9
-						MX28_PAD_LCD_D10__LCD_D10
-						MX28_PAD_LCD_D11__LCD_D11
-						MX28_PAD_LCD_D12__LCD_D12
-						MX28_PAD_LCD_D13__LCD_D13
-						MX28_PAD_LCD_D14__LCD_D14
-						MX28_PAD_LCD_D15__LCD_D15
-						MX28_PAD_LCD_D16__LCD_D16
-						MX28_PAD_LCD_D17__LCD_D17
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10049: lcdif-evk@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RESET__GPIO_3_30
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				w1_gpio_pins: w1-gpio@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D21__GPIO_1_21
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>; /* 0 will enable the keeper */
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_18bit_pins_cfa10049
-					     &lcdif_pins_cfa10049
-					     &lcdif_pins_cfa10049_pullup>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <18>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <9216000>;
-							hactive = <320>;
-							vactive = <480>;
-							hback-porch = <2>;
-							hfront-porch = <2>;
-							vback-porch = <2>;
-							vfront-porch = <2>;
-							hsync-len = <15>;
-							vsync-len = <15>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_b>;
-				status = "okay";
-			};
-
-			i2c1: i2c@8005a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c1_pins_a>;
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-
-			lradc@80050000 {
-				status = "okay";
-				fsl,lradc-touchscreen-wires = <4>;
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-0 = <&usb1_pins_a>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb1_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb_pins_cfa10049>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio0 7 1>;
-		};
-	};
-
-	ahb@80080000 {
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a
-				&mac0_pins_cfa10049>;
-			phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-	};
-
-	spi2 {
-		compatible = "spi-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi2_pins_cfa10049>;
-		status = "okay";
-		gpio-sck = <&gpio2 16 0>;
-		gpio-mosi = <&gpio2 17 0>;
-		gpio-miso = <&gpio2 18 0>;
-		cs-gpios = <&gpio3 5 0>;
-		num-chipselects = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		hx8357: hx8357@0 {
-			compatible = "himax,hx8357b", "himax,hx8357";
-			reg = <0>;
-			spi-max-frequency = <100000>;
-			spi-cpol;
-			spi-cpha;
-			gpios-reset = <&gpio3 30 0>;
-			im-gpios = <&gpio5 4 0 &gpio5 5 0 &gpio5 6 0>;
-		};
-	};
-
-	spi3 {
-		compatible = "spi-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi3_pins_cfa10049>;
-		status = "okay";
-		gpio-sck = <&gpio0 24 0>;
-		gpio-mosi = <&gpio0 28 0>;
-		cs-gpios = <&gpio0 17 0 &gpio0 26 0 &gpio0 27 0>;
-		num-chipselects = <3>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio5: gpio5@0 {
-			compatible = "fairchild,74hc595";
-			gpio-controller;
-			#gpio-cells = <2>;
-			reg = <0>;
-			registers-number = <2>;
-			spi-max-frequency = <100000>;
-		};
-
-		gpio6: gpio6@1 {
-			compatible = "fairchild,74hc595";
-			gpio-controller;
-			#gpio-cells = <2>;
-			reg = <1>;
-			registers-number = <4>;
-			spi-max-frequency = <100000>;
-		};
-
-		dac0: dh2228@2 {
-			compatible = "rohm,dh2228fv";
-			reg = <2>;
-			spi-max-frequency = <100000>;
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&rotary_btn_pins_cfa10049>;
-
-		rotary_button {
-			label = "rotary_button";
-			gpios = <&gpio3 26 1>;
-			debounce-interval = <10>;
-			linux,code = <28>;
-		};
-	};
-
-	rotary {
-		compatible = "rotary-encoder";
-		pinctrl-names = "default";
-		pinctrl-0 = <&rotary_pins_cfa10049>;
-		gpios = <&gpio3 24 1>, <&gpio3 25 1>;
-		linux,axis = <1>; /* REL_Y */
-		rotary-encoder,relative-axis;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 3 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-
-	};
-
-	onewire {
-		compatible = "w1-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&w1_gpio_pins>;
-		status = "okay";
-		gpios = <&gpio1 21 0>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-cfa10055.dts b/arch/arm/boot/dts/imx28-cfa10055.dts
deleted file mode 100644
index d05c370dfc17..000000000000
--- a/arch/arm/boot/dts/imx28-cfa10055.dts
+++ /dev/null
@@ -1,161 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Crystalfontz America, Inc.
- * 				  Free Electrons
- */
-
-/*
- * The CFA-10055 is an expansion board for the CFA-10036 module and
- * CFA-10037, thus we need to include the CFA-10037 DTS.
- */
-#include "imx28-cfa10037.dts"
-
-/ {
-	model = "Crystalfontz CFA-10055 Board";
-	compatible = "crystalfontz,cfa10055", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
-
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				spi2_pins_cfa10055: spi2-cfa10055@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SCK__GPIO_2_16
-						MX28_PAD_SSP2_MOSI__GPIO_2_17
-						MX28_PAD_SSP2_MISO__GPIO_2_18
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				lcdif_18bit_pins_cfa10055: lcdif-18bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D00__LCD_D0
-						MX28_PAD_LCD_D01__LCD_D1
-						MX28_PAD_LCD_D02__LCD_D2
-						MX28_PAD_LCD_D03__LCD_D3
-						MX28_PAD_LCD_D04__LCD_D4
-						MX28_PAD_LCD_D05__LCD_D5
-						MX28_PAD_LCD_D06__LCD_D6
-						MX28_PAD_LCD_D07__LCD_D7
-						MX28_PAD_LCD_D08__LCD_D8
-						MX28_PAD_LCD_D09__LCD_D9
-						MX28_PAD_LCD_D10__LCD_D10
-						MX28_PAD_LCD_D11__LCD_D11
-						MX28_PAD_LCD_D12__LCD_D12
-						MX28_PAD_LCD_D13__LCD_D13
-						MX28_PAD_LCD_D14__LCD_D14
-						MX28_PAD_LCD_D15__LCD_D15
-						MX28_PAD_LCD_D16__LCD_D16
-						MX28_PAD_LCD_D17__LCD_D17
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10055: lcdif-evk@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RESET__GPIO_3_30
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_18bit_pins_cfa10055
-					     &lcdif_pins_cfa10055
-					     &lcdif_pins_cfa10055_pullup>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <18>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <9216000>;
-							hactive = <320>;
-							vactive = <480>;
-							hback-porch = <2>;
-							hfront-porch = <2>;
-							vback-porch = <2>;
-							vfront-porch = <2>;
-							hsync-len = <15>;
-							vsync-len = <15>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				fsl,lradc-touchscreen-wires = <4>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_b>;
-				status = "okay";
-			};
-		};
-	};
-
-	spi2 {
-		compatible = "spi-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi2_pins_cfa10055>;
-		status = "okay";
-		gpio-sck = <&gpio2 16 0>;
-		gpio-mosi = <&gpio2 17 0>;
-		gpio-miso = <&gpio2 18 0>;
-		cs-gpios = <&gpio3 5 0>;
-		num-chipselects = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		hx8357: hx8357@0 {
-			compatible = "himax,hx8357b", "himax,hx8357";
-			reg = <0>;
-			spi-max-frequency = <100000>;
-			spi-cpol;
-			spi-cpha;
-			gpios-reset = <&gpio3 30 0>;
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 3 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-cfa10056.dts b/arch/arm/boot/dts/imx28-cfa10056.dts
deleted file mode 100644
index c1060bd5f17f..000000000000
--- a/arch/arm/boot/dts/imx28-cfa10056.dts
+++ /dev/null
@@ -1,113 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Free Electrons
- */
-
-/*
- * The CFA-10055 is an expansion board for the CFA-10036 module and
- * CFA-10037, thus we need to include the CFA-10037 DTS.
- */
-#include "imx28-cfa10037.dts"
-
-/ {
-	model = "Crystalfontz CFA-10056 Board";
-	compatible = "crystalfontz,cfa10056", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
-
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				spi2_pins_cfa10056: spi2-cfa10056@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SCK__GPIO_2_16
-						MX28_PAD_SSP2_MOSI__GPIO_2_17
-						MX28_PAD_SSP2_MISO__GPIO_2_18
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				lcdif_pins_cfa10056: lcdif-10056@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RESET__GPIO_3_30
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-						&lcdif_pins_cfa10056
-						&lcdif_pins_cfa10056_pullup >;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <24>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <32000000>;
-							hactive = <480>;
-							vactive = <800>;
-							hback-porch = <2>;
-							hfront-porch = <2>;
-							vback-porch = <2>;
-							vfront-porch = <2>;
-							hsync-len = <5>;
-							vsync-len = <5>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-	};
-
-	spi2 {
-		compatible = "spi-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi2_pins_cfa10056>;
-		status = "okay";
-		gpio-sck = <&gpio2 16 0>;
-		gpio-mosi = <&gpio2 17 0>;
-		gpio-miso = <&gpio2 18 0>;
-		cs-gpios = <&gpio3 5 0>;
-		num-chipselects = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		hx8369: hx8369@0 {
-			compatible = "himax,hx8369a", "himax,hx8369";
-			reg = <0>;
-			spi-max-frequency = <100000>;
-			spi-cpol;
-			spi-cpha;
-			gpios-reset = <&gpio3 30 0>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts
deleted file mode 100644
index 2f7e479dbc74..000000000000
--- a/arch/arm/boot/dts/imx28-cfa10057.dts
+++ /dev/null
@@ -1,171 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Crystalfontz America, Inc.
- * Copyright 2012 Free Electrons
- */
-
-/*
- * The CFA-10057 is an expansion board for the CFA-10036 module, thus we
- * need to include the CFA-10036 DTS.
- */
-#include "imx28-cfa10036.dts"
-
-/ {
-	model = "Crystalfontz CFA-10057 Board";
-	compatible = "crystalfontz,cfa10057", "crystalfontz,cfa10036", "fsl,imx28";
-
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				usb_pins_cfa10057: usb-10057@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_18bit_pins_cfa10057: lcdif-18bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D00__LCD_D0
-						MX28_PAD_LCD_D01__LCD_D1
-						MX28_PAD_LCD_D02__LCD_D2
-						MX28_PAD_LCD_D03__LCD_D3
-						MX28_PAD_LCD_D04__LCD_D4
-						MX28_PAD_LCD_D05__LCD_D5
-						MX28_PAD_LCD_D06__LCD_D6
-						MX28_PAD_LCD_D07__LCD_D7
-						MX28_PAD_LCD_D08__LCD_D8
-						MX28_PAD_LCD_D09__LCD_D9
-						MX28_PAD_LCD_D10__LCD_D10
-						MX28_PAD_LCD_D11__LCD_D11
-						MX28_PAD_LCD_D12__LCD_D12
-						MX28_PAD_LCD_D13__LCD_D13
-						MX28_PAD_LCD_D14__LCD_D14
-						MX28_PAD_LCD_D15__LCD_D15
-						MX28_PAD_LCD_D16__LCD_D16
-						MX28_PAD_LCD_D17__LCD_D17
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10057: lcdif-evk@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_18bit_pins_cfa10057
-					     &lcdif_pins_cfa10057>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <18>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <30000000>;
-							hactive = <480>;
-							vactive = <800>;
-							hfront-porch = <12>;
-							hback-porch = <2>;
-							vfront-porch = <5>;
-							vback-porch = <3>;
-							hsync-len = <2>;
-							vsync-len = <2>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				fsl,lradc-touchscreen-wires = <4>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm4_pins_a>;
-				status = "okay";
-			};
-
-			i2c1: i2c@8005a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c1_pins_a>;
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-0 = <&usb1_pins_a>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb1_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb_pins_cfa10057>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio0 7 1>;
-		};
-	};
-
-	ahb@80080000 {
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 4 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-cfa10058.dts b/arch/arm/boot/dts/imx28-cfa10058.dts
deleted file mode 100644
index 4465fd86785a..000000000000
--- a/arch/arm/boot/dts/imx28-cfa10058.dts
+++ /dev/null
@@ -1,138 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Crystalfontz America, Inc.
- * Copyright 2013 Free Electrons
- */
-
-/*
- * The CFA-10058 is an expansion board for the CFA-10036 module, thus we
- * need to include the CFA-10036 DTS.
- */
-#include "imx28-cfa10036.dts"
-
-/ {
-	model = "Crystalfontz CFA-10058 Board";
-	compatible = "crystalfontz,cfa10058", "crystalfontz,cfa10036", "fsl,imx28";
-
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				usb_pins_cfa10058: usb-10058@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10058: lcdif-10058@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-						 &lcdif_pins_cfa10058>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <24>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <30000000>;
-							hactive = <800>;
-							vactive = <480>;
-							hback-porch = <40>;
-							hfront-porch = <40>;
-							vback-porch = <13>;
-							vfront-porch = <29>;
-							hsync-len = <8>;
-							vsync-len = <8>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				fsl,lradc-touchscreen-wires = <4>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_b>;
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-0 = <&usb1_pins_a>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb1_vbus: regulator@0 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb_pins_cfa10058>;
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio0 7 1>;
-		};
-	};
-
-	ahb@80080000 {
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 3 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-duckbill-2-485.dts b/arch/arm/boot/dts/imx28-duckbill-2-485.dts
deleted file mode 100644
index d451fa018d83..000000000000
--- a/arch/arm/boot/dts/imx28-duckbill-2-485.dts
+++ /dev/null
@@ -1,184 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
- * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de>
- */
-
-/dts-v1/;
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "imx28.dtsi"
-
-/ {
-	model = "I2SE Duckbill 2 485";
-	compatible = "i2se,duckbill-2-485", "i2se,duckbill-2", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_8bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <8>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-				non-removable;
-			};
-
-			ssp2: spi@80014000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc2_4bit_pins_b
-					&mmc2_cd_cfg &mmc2_sck_cfg_b>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D17__GPIO_1_17    /* Revision detection */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_reset_pin: mac0-phy-reset@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_ALE__GPIO_0_26    /* PHY Reset */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_int_pin: mac0-phy-int@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7    /* PHY Interrupt */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins: leds@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SAIF0_MCLK__GPIO_3_20
-						MX28_PAD_SAIF0_LRCLK__GPIO_3_21
-						MX28_PAD_I2C0_SCL__GPIO_3_24
-						MX28_PAD_I2C0_SDA__GPIO_3_25
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_2pins_a>;
-				status = "okay";
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			status = "okay";
-			dr_mode = "peripheral";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
-			phy-supply = <&reg_3p3v>;
-			phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <25>;
-			phy-handle = <&ethphy>;
-			status = "okay";
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ethphy: ethernet-phy@0 {
-					compatible = "ethernet-phy-ieee802.3-c22";
-					reg = <0>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&mac0_phy_int_pin>;
-					interrupt-parent = <&gpio0>;
-					interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
-					max-speed = <100>;
-				};
-			};
-		};
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-
-		status-red {
-			label = "duckbill:red:status";
-			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		status-green {
-			label = "duckbill:green:status";
-			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		rs485-red {
-			label = "duckbill:red:rs485";
-			gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
-		};
-
-		rs485-green {
-			label = "duckbill:green:rs485";
-			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts
deleted file mode 100644
index bacb846f99e3..000000000000
--- a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts
+++ /dev/null
@@ -1,213 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
- * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de>
- */
-
-/dts-v1/;
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "imx28.dtsi"
-
-/ {
-	model = "I2SE Duckbill 2 EnOcean";
-	compatible = "i2se,duckbill-2-enocean", "i2se,duckbill-2", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_8bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <8>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-				non-removable;
-			};
-
-			ssp2: spi@80014000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc2_4bit_pins_b
-					&mmc2_cd_cfg &mmc2_sck_cfg_b>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D17__GPIO_1_17    /* Revision detection */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_reset_pin: mac0-phy-reset@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_ALE__GPIO_0_26    /* PHY Reset */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_int_pin: mac0-phy-int@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7    /* PHY Interrupt */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins: leds@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SAIF0_MCLK__GPIO_3_20
-						MX28_PAD_SAIF0_LRCLK__GPIO_3_21
-						MX28_PAD_AUART0_CTS__GPIO_3_2
-						MX28_PAD_I2C0_SCL__GPIO_3_24
-						MX28_PAD_I2C0_SDA__GPIO_3_25
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				enocean_button: enocean-button@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART0_RTS__GPIO_3_3
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_2pins_a>;
-				status = "okay";
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			status = "okay";
-			dr_mode = "peripheral";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
-			phy-supply = <&reg_3p3v>;
-			phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <25>;
-			phy-handle = <&ethphy>;
-			status = "okay";
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ethphy: ethernet-phy@0 {
-					compatible = "ethernet-phy-ieee802.3-c22";
-					reg = <0>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&mac0_phy_int_pin>;
-					interrupt-parent = <&gpio0>;
-					interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
-					max-speed = <100>;
-				};
-			};
-		};
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-
-		status-red {
-			label = "duckbill:red:status";
-			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		status-green {
-			label = "duckbill:green:status";
-			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		enocean-blue {
-			label = "duckbill:blue:enocean";
-			gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
-		};
-
-		enocean-red {
-			label = "duckbill:red:enocean";
-			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
-		};
-
-		enocean-green {
-			label = "duckbill:green:enocean";
-			gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&enocean_button>;
-
-		enocean {
-			label = "EnOcean";
-			linux,code = <KEY_NEW>;
-			gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-duckbill-2-spi.dts b/arch/arm/boot/dts/imx28-duckbill-2-spi.dts
deleted file mode 100644
index 0e8be5975709..000000000000
--- a/arch/arm/boot/dts/imx28-duckbill-2-spi.dts
+++ /dev/null
@@ -1,194 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
- * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de>
- */
-
-/dts-v1/;
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "imx28.dtsi"
-
-/ {
-	model = "I2SE Duckbill 2 SPI";
-	compatible = "i2se,duckbill-2-spi", "i2se,duckbill-2", "fsl,imx28";
-
-	aliases {
-		ethernet1 = &qca7000;
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_8bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <8>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-				non-removable;
-			};
-
-			ssp2: spi@80014000 {
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-
-				qca7000: ethernet@0 {
-					reg = <0>;
-					compatible = "qca,qca7000";
-					pinctrl-names = "default";
-					pinctrl-0 = <&qca7000_pins>;
-					interrupt-parent = <&gpio3>;
-					interrupts = <3 IRQ_TYPE_EDGE_RISING>;
-					spi-cpha;
-					spi-cpol;
-					spi-max-frequency = <8000000>;
-				};
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D17__GPIO_1_17    /* Revision detection */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_reset_pin: mac0-phy-reset@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_ALE__GPIO_0_26    /* PHY Reset */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_int_pin: mac0-phy-int@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7    /* PHY Interrupt */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins: led@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SAIF0_MCLK__GPIO_3_20
-						MX28_PAD_SAIF0_LRCLK__GPIO_3_21
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				qca7000_pins: qca7000@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART0_RTS__GPIO_3_3    /* Interrupt */
-						MX28_PAD_LCD_D13__GPIO_1_13      /* QCA7K reset */
-						MX28_PAD_LCD_D14__GPIO_1_14      /* GPIO 0 */
-						MX28_PAD_LCD_D15__GPIO_1_15      /* GPIO 1 */
-						MX28_PAD_LCD_D18__GPIO_1_18      /* GPIO 2 */
-						MX28_PAD_LCD_D21__GPIO_1_21      /* GPIO 3 */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				status = "okay";
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			status = "okay";
-			dr_mode = "peripheral";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
-			phy-supply = <&reg_3p3v>;
-			phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <25>;
-			phy-handle = <&ethphy>;
-			status = "okay";
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ethphy: ethernet-phy@0 {
-					compatible = "ethernet-phy-ieee802.3-c22";
-					reg = <0>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&mac0_phy_int_pin>;
-					interrupt-parent = <&gpio0>;
-					interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
-					max-speed = <100>;
-				};
-			};
-		};
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-
-		status-red {
-			label = "duckbill:red:status";
-			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		status-green {
-			label = "duckbill:green:status";
-			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-duckbill-2.dts b/arch/arm/boot/dts/imx28-duckbill-2.dts
deleted file mode 100644
index 23fd3036404d..000000000000
--- a/arch/arm/boot/dts/imx28-duckbill-2.dts
+++ /dev/null
@@ -1,178 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
- * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de>
- */
-
-/dts-v1/;
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "imx28.dtsi"
-
-/ {
-	model = "I2SE Duckbill 2";
-	compatible = "i2se,duckbill-2", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_8bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <8>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-				non-removable;
-			};
-
-			ssp2: spi@80014000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc2_4bit_pins_b
-					&mmc2_cd_cfg &mmc2_sck_cfg_b>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D17__GPIO_1_17    /* Revision detection */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_reset_pin: mac0-phy-reset@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_ALE__GPIO_0_26    /* PHY Reset */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_int_pin: mac0-phy-int@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7    /* PHY Interrupt */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins: leds@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SAIF0_MCLK__GPIO_3_20
-						MX28_PAD_SAIF0_LRCLK__GPIO_3_21
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				status = "okay";
-			};
-
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_2pins_a>;
-				status = "okay";
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			status = "okay";
-			dr_mode = "peripheral";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
-			phy-supply = <&reg_3p3v>;
-			phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <25>;
-			phy-handle = <&ethphy>;
-			status = "okay";
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ethphy: ethernet-phy@0 {
-					compatible = "ethernet-phy-ieee802.3-c22";
-					reg = <0>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&mac0_phy_int_pin>;
-					interrupt-parent = <&gpio0>;
-					interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
-					max-speed = <100>;
-				};
-			};
-		};
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-
-		status-red {
-			label = "duckbill:red:status";
-			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		status-green {
-			label = "duckbill:green:status";
-			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-duckbill.dts b/arch/arm/boot/dts/imx28-duckbill.dts
deleted file mode 100644
index c666afb12445..000000000000
--- a/arch/arm/boot/dts/imx28-duckbill.dts
+++ /dev/null
@@ -1,147 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2013-2014,2016 Michael Heimpold <mhei@heimpold.de>
- * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include "imx28.dtsi"
-
-/ {
-	model = "I2SE Duckbill";
-	compatible = "i2se,duckbill", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-			};
-
-			ssp2: spi@80014000 {
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D17__GPIO_1_17    /* Revision detection */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_reset_pin: mac0-phy-reset@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DATA7__GPIO_2_7    /* PHY Reset */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins: leds@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART1_RX__GPIO_3_4
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				status = "okay";
-			};
-
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_2pins_a>;
-				status = "okay";
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			status = "okay";
-			dr_mode = "peripheral";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
-			phy-supply = <&reg_3p3v>;
-			phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <25>;
-			status = "okay";
-		};
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-
-		status-red {
-			label = "duckbill:red:status";
-			gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		status-green {
-			label = "duckbill:green:status";
-			gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
deleted file mode 100644
index 7e2b0f198dfa..000000000000
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ /dev/null
@@ -1,360 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2012 Freescale Semiconductor, Inc.
-
-/dts-v1/;
-#include "imx28.dtsi"
-
-/ {
-	model = "Freescale i.MX28 Evaluation Kit";
-	compatible = "fsl,imx28-evk", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_vddio_sd0: regulator-vddio-sd0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vddio-sd0";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 28 0>;
-	};
-
-	reg_fec_3v3: regulator-fec-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "fec-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 15 0>;
-	};
-
-	reg_usb0_vbus: regulator-usb0-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb0_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 9 0>;
-		enable-active-high;
-	};
-
-	reg_usb1_vbus: regulator-usb1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 8 0>;
-		enable-active-high;
-	};
-
-	reg_lcd_3v3: regulator-lcd-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 30 0>;
-		enable-active-high;
-	};
-
-	reg_can_3v3: regulator-can-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "can-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 13 0>;
-		enable-active-high;
-	};
-
-	reg_lcd_5v: regulator-lcd-5v {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd-5v";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	panel {
-		compatible = "sii,43wvf1g";
-		backlight = <&backlight_display>;
-		dvdd-supply = <&reg_lcd_3v3>;
-		avdd-supply = <&reg_lcd_5v>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&display_out>;
-			};
-		};
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			nand-controller@8000c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg
-					     &gpmi_pins_evk>;
-				status = "okay";
-			};
-
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_8bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <8>;
-				wp-gpios = <&gpio2 12 0>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				status = "okay";
-			};
-
-			ssp1: spi@80012000 {
-				compatible = "fsl,imx28-mmc";
-				bus-width = <8>;
-				wp-gpios = <&gpio0 28 0>;
-			};
-
-			ssp2: spi@80014000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-
-				flash: m25p80@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "sst,sst25vf016b", "jedec,spi-nor";
-					spi-max-frequency = <40000000>;
-					reg = <0>;
-				};
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP1_CMD__GPIO_2_13
-						MX28_PAD_SSP1_DATA3__GPIO_2_15
-						MX28_PAD_ENET0_RX_CLK__GPIO_4_13
-						MX28_PAD_SSP1_SCK__GPIO_2_12
-						MX28_PAD_PWM3__GPIO_3_28
-						MX28_PAD_LCD_RESET__GPIO_3_30
-						MX28_PAD_AUART2_RX__GPIO_3_8
-						MX28_PAD_AUART2_TX__GPIO_3_9
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pin_gpio3_5: led_gpio3_5@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				gpmi_pins_evk: gpmi-nand-evk@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_CE1N__GPMI_CE1N
-						MX28_PAD_GPMI_RDY1__GPMI_READY1
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_evk: lcdif-evk@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-					     &lcdif_pins_evk>;
-				status = "okay";
-
-				port {
-					display_out: endpoint {
-						remote-endpoint = <&panel_in>;
-					};
-				};
-			};
-
-			can0: can@80032000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&can0_pins_a>;
-				xceiver-supply = <&reg_can_3v3>;
-				status = "okay";
-			};
-
-			can1: can@80034000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&can1_pins_a>;
-				xceiver-supply = <&reg_can_3v3>;
-				status = "okay";
-			};
-		};
-
-		apbx@80040000 {
-			saif0: saif@80042000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif0_pins_a>;
-				status = "okay";
-			};
-
-			saif1: saif@80046000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif1_pins_a>;
-				fsl,saif-master = <&saif0>;
-				status = "okay";
-			};
-
-			lradc@80050000 {
-				status = "okay";
-				fsl,lradc-touchscreen-wires = <4>;
-				fsl,ave-ctrl = <4>;
-				fsl,ave-delay = <2>;
-				fsl,settling = <10>;
-			};
-
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-
-				sgtl5000: codec@a {
-					compatible = "fsl,sgtl5000";
-					reg = <0x0a>;
-					#sound-dai-cells = <0>;
-					VDDA-supply = <&reg_3p3v>;
-					VDDIO-supply = <&reg_3p3v>;
-					clocks = <&saif0>;
-				};
-
-				at24@51 {
-					compatible = "atmel,24c32";
-					pagesize = <32>;
-					reg = <0x51>;
-				};
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm2_pins_a>;
-				status = "okay";
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				uart-has-rtscts;
-				status = "okay";
-			};
-
-			auart3: serial@80070000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart3_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb0_id_pins_a>;
-			vbus-supply = <&reg_usb0_vbus>;
-			status = "okay";
-		};
-
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			status = "okay";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-supply = <&reg_fec_3v3>;
-			phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-
-		mac1: ethernet@800f4000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac1_pins_a>;
-			status = "okay";
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx28-evk-sgtl5000",
-			     "fsl,mxs-audio-sgtl5000";
-		model = "imx28-evk-sgtl5000";
-		saif-controllers = <&saif0 &saif1>;
-		audio-codec = <&sgtl5000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pin_gpio3_5>;
-
-		user {
-			label = "Heartbeat";
-			gpios = <&gpio3 5 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	backlight_display: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 2 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-m28.dtsi b/arch/arm/boot/dts/imx28-m28.dtsi
deleted file mode 100644
index 2bdb4c093545..000000000000
--- a/arch/arm/boot/dts/imx28-m28.dtsi
+++ /dev/null
@@ -1,56 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2014 Marek Vasut <marex@denx.de>
- */
-
-#include "imx28.dtsi"
-
-/ {
-	model = "Aries/DENX M28";
-	compatible = "aries,m28", "denx,m28", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			nand-controller@8000c000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
-				status = "okay";
-			};
-		};
-
-		apbx@80040000 {
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-
-				rtc: rtc@68 {
-					compatible = "st,m41t62";
-					reg = <0x68>;
-				};
-			};
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-m28cu3.dts b/arch/arm/boot/dts/imx28-m28cu3.dts
deleted file mode 100644
index 865ac3d573c7..000000000000
--- a/arch/arm/boot/dts/imx28-m28cu3.dts
+++ /dev/null
@@ -1,266 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2013 Marek Vasut <marex@denx.de>
- */
-
-/dts-v1/;
-#include "imx28.dtsi"
-
-/ {
-	model = "MSR M28CU3";
-	compatible = "msr,m28cu3", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			nand-controller@8000c000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
-				status = "okay";
-
-				partition@0 {
-					label = "gpmi-nfc-0-boot";
-					reg = <0x00000000 0x01400000>;
-					read-only;
-				};
-
-				partition@1 {
-					label = "gpmi-nfc-general-use";
-					reg = <0x01400000 0x0ec00000>;
-				};
-			};
-
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a
-					     &mmc0_cd_cfg
-					     &mmc0_sck_cfg>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				status = "okay";
-			};
-
-			ssp2: spi@80014000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc2_4bit_pins_a
-					     &mmc2_cd_cfg
-					     &mmc2_sck_cfg_a>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_vddio_sd1>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SS0__GPIO_2_19
-						MX28_PAD_PWM4__GPIO_3_29
-						MX28_PAD_AUART2_RX__GPIO_3_8
-						MX28_PAD_ENET0_RX_CLK__GPIO_4_13
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_m28: lcdif-m28@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_VSYNC__LCD_VSYNC
-						MX28_PAD_LCD_HSYNC__LCD_HSYNC
-						MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
-						MX28_PAD_LCD_RESET__LCD_RESET
-						MX28_PAD_LCD_CS__LCD_ENABLE
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins_gpio: leds-m28@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP3_MISO__GPIO_2_26
-						MX28_PAD_SSP3_SCK__GPIO_2_24
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			ocotp@8002c000 {
-				status = "okay";
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-					     &lcdif_pins_m28>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <24>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <6410256>;
-							hactive = <320>;
-							vactive = <240>;
-							hback-porch = <38>;
-							hfront-porch = <20>;
-							vback-porch = <15>;
-							vfront-porch = <5>;
-							hsync-len = <30>;
-							vsync-len = <3>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_b>;
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_2pins_a>;
-				status = "okay";
-			};
-
-			auart3: serial@80070000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart3_2pins_b>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb1_pins_a>;
-			disable-over-current;
-			status = "okay";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-
-		mac1: ethernet@800f4000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac1_pins_a>;
-			status = "okay";
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 3 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_gpio>;
-
-		user1 {
-			label = "sd0-led";
-			gpios = <&gpio2 26 0>;
-			linux,default-trigger = "mmc0";
-		};
-
-		user2 {
-			label = "sd1-led";
-			gpios = <&gpio2 24 0>;
-			linux,default-trigger = "mmc2";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_vddio_sd0: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "vddio-sd0";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio3 29 0>;
-		};
-
-		reg_vddio_sd1: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "vddio-sd1";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio2 19 0>;
-		};
-
-		reg_usb1_vbus: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 8 0>;
-			enable-active-high;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
deleted file mode 100644
index f3bddc5ada4b..000000000000
--- a/arch/arm/boot/dts/imx28-m28evk.dts
+++ /dev/null
@@ -1,271 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
-
- * Copyright (C) 2012 Marek Vasut <marex@denx.de>
- */
-
-/dts-v1/;
-#include "imx28-m28.dtsi"
-
-/ {
-	model = "Aries/DENX M28EVK";
-	compatible = "aries,m28evk", "denx,m28evk", "fsl,imx28";
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_8bit_pins_a
-					     &mmc0_cd_cfg
-					     &mmc0_sck_cfg>;
-				bus-width = <8>;
-				wp-gpios = <&gpio3 10 0>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				status = "okay";
-			};
-
-			ssp2: spi@80014000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-
-				flash: m25p80@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "m25p80", "jedec,spi-nor";
-					spi-max-frequency = <40000000>;
-					reg = <0>;
-				};
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_PWM3__GPIO_3_28
-						MX28_PAD_AUART2_CTS__GPIO_3_10
-						MX28_PAD_AUART2_RTS__GPIO_3_11
-						MX28_PAD_AUART3_RX__GPIO_3_12
-						MX28_PAD_AUART3_TX__GPIO_3_13
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_m28: lcdif-m28@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
-						MX28_PAD_LCD_ENABLE__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-					     &lcdif_pins_m28>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <16>;
-					bus-width = <18>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <33260000>;
-							hactive = <800>;
-							vactive = <480>;
-							hback-porch = <0>;
-							hfront-porch = <256>;
-							vback-porch = <0>;
-							vfront-porch = <45>;
-							hsync-len = <1>;
-							vsync-len = <1>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-
-			can0: can@80032000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&can0_pins_a>;
-				status = "okay";
-			};
-
-			can1: can@80034000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&can1_pins_a>;
-				status = "okay";
-			};
-		};
-
-		apbx@80040000 {
-			saif0: saif@80042000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif0_pins_a>;
-				status = "okay";
-			};
-
-			saif1: saif@80046000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif1_pins_a>;
-				fsl,saif-master = <&saif0>;
-				status = "okay";
-			};
-
-			i2c0: i2c@80058000 {
-				sgtl5000: codec@a {
-					compatible = "fsl,sgtl5000";
-					reg = <0x0a>;
-					#sound-dai-cells = <0>;
-					VDDA-supply = <&reg_3p3v>;
-					VDDIO-supply = <&reg_3p3v>;
-					clocks = <&saif0>;
-				};
-
-				eeprom: eeprom@51 {
-					compatible = "atmel,24c128";
-					reg = <0x51>;
-					pagesize = <32>;
-				};
-			};
-
-			lradc@80050000 {
-				status = "okay";
-				fsl,lradc-touchscreen-wires = <4>;
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				status = "okay";
-			};
-
-			auart1: serial@8006c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart1_pins_a>;
-				status = "okay";
-			};
-
-			auart2: serial@8006e000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart2_2pins_b>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm4_pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			vbus-supply = <&reg_usb0_vbus>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb0_pins_a>;
-			status = "okay";
-		};
-
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb1_pins_a>;
-			status = "okay";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			clocks = <&clks 57>, <&clks 57>;
-			clock-names = "ipg", "ahb";
-			status = "okay";
-		};
-
-		mac1: ethernet@800f4000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac1_pins_a>;
-			status = "okay";
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 4 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-
-	regulators {
-		reg_vddio_sd0: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "vddio-sd0";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio3 28 0>;
-		};
-
-		reg_usb0_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "usb0_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 12 0>;
-		};
-
-		reg_usb1_vbus: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 13 0>;
-		};
-	};
-
-	sound {
-		compatible = "denx,m28evk-sgtl5000",
-			     "fsl,mxs-audio-sgtl5000";
-		model = "m28evk-sgtl5000";
-		saif-controllers = <&saif0 &saif1>;
-		audio-codec = <&sgtl5000>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts
deleted file mode 100644
index 43be7a6a769b..000000000000
--- a/arch/arm/boot/dts/imx28-sps1.dts
+++ /dev/null
@@ -1,166 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2012 Marek Vasut <marex@denx.de>
- */
-
-/dts-v1/;
-#include "imx28.dtsi"
-
-/ {
-	model = "SchulerControl GmbH, SC SPS 1";
-	compatible = "schulercontrol,imx28-sps1", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog-gpios@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D00__GPIO_0_0
-						MX28_PAD_GPMI_D03__GPIO_0_3
-						MX28_PAD_GPMI_D06__GPIO_0_6
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-			};
-
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a>;
-				bus-width = <4>;
-				status = "okay";
-			};
-
-			ssp2: spi@80014000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-
-				flash: m25p80@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "everspin,mr25h256", "mr25h256";
-					spi-max-frequency = <40000000>;
-					reg = <0>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-
-				rtc: rtc@51 {
-					compatible = "nxp,pcf8563";
-					reg = <0x51>;
-				};
-
-				eeprom: eeprom@52 {
-					compatible = "atmel,24c64";
-					reg = <0x52>;
-					pagesize = <32>;
-				};
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			vbus-supply = <&reg_usb0_vbus>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb0_pins_b>;
-			status = "okay";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			status = "okay";
-		};
-
-		mac1: ethernet@800f4000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac1_pins_a>;
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb0_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb0_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 9 0>;
-		};
-	};
-
-	leds {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "gpio-leds";
-		status = "okay";
-
-		led@1 {
-			label = "sps1-1:yellow:user";
-			gpios = <&gpio0 6 0>;
-			linux,default-trigger = "heartbeat";
-			reg = <0>;
-		};
-
-		led@2 {
-			label = "sps1-2:red:user";
-			gpios = <&gpio0 3 0>;
-			linux,default-trigger = "heartbeat";
-			reg = <1>;
-		};
-
-		led@3 {
-			label = "sps1-3:red:user";
-			gpios = <&gpio0 0 0>;
-			default-trigger = "heartbeat";
-			reg = <2>;
-		};
-
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-ts4600.dts b/arch/arm/boot/dts/imx28-ts4600.dts
deleted file mode 100644
index 097ec35c62d8..000000000000
--- a/arch/arm/boot/dts/imx28-ts4600.dts
+++ /dev/null
@@ -1,74 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2016 Savoir-Faire Linux
- * Author: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
- */
-
-/dts-v1/;
-#include "imx28.dtsi"
-#include "dt-bindings/gpio/gpio.h"
-
-/ {
-
-	model = "Technologic Systems i.MX28 TS-4600";
-	compatible = "technologic,imx28-ts4600", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x10000000>;   /* 256MB */
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a
-					     &mmc0_sck_cfg
-					     &en_sd_pwr>;
-				broken-cd = <1>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-
-				en_sd_pwr: en-sd-pwr@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_PWM3__GPIO_3_28
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-			};
-		};
-
-		apbx@80040000 {
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm2_pins_a>;
-				status = "okay";
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
-	reg_vddio_sd0: regulator-vddio-sd0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vddio-sd0";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		gpio = <&gpio3 28 GPIO_ACTIVE_LOW>;
-	};
-
-};
diff --git a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
deleted file mode 100644
index 17bd2a97609a..000000000000
--- a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
+++ /dev/null
@@ -1,89 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- */
-
-#include "imx35.dtsi"
-
-/ {
-	model = "Eukrea CPUIMX35";
-	compatible = "eukrea,cpuimx35", "fsl,imx35";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x8000000>; /* 128M */
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pcf8563@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-
-	tsc2007: tsc2007@48 {
-		compatible = "ti,tsc2007";
-		gpios = <&gpio3 2 0>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <0x2 0x8>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tsc2007_1>;
-		reg = <0x48>;
-		ti,x-plate-ohms = <180>;
-	};
-};
-
-&iomuxc {
-	imx35-eukrea {
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX35_PAD_FEC_TX_CLK__FEC_TX_CLK		0x80000000
-				MX35_PAD_FEC_RX_CLK__FEC_RX_CLK		0x80000000
-				MX35_PAD_FEC_RX_DV__FEC_RX_DV		0x80000000
-				MX35_PAD_FEC_COL__FEC_COL		0x80000000
-				MX35_PAD_FEC_RDATA0__FEC_RDATA_0	0x80000000
-				MX35_PAD_FEC_TDATA0__FEC_TDATA_0	0x80000000
-				MX35_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
-				MX35_PAD_FEC_MDC__FEC_MDC		0x80000000
-				MX35_PAD_FEC_MDIO__FEC_MDIO		0x80000000
-				MX35_PAD_FEC_TX_ERR__FEC_TX_ERR		0x80000000
-				MX35_PAD_FEC_RX_ERR__FEC_RX_ERR		0x80000000
-				MX35_PAD_FEC_CRS__FEC_CRS		0x80000000
-				MX35_PAD_FEC_RDATA1__FEC_RDATA_1	0x80000000
-				MX35_PAD_FEC_TDATA1__FEC_TDATA_1	0x80000000
-				MX35_PAD_FEC_RDATA2__FEC_RDATA_2	0x80000000
-				MX35_PAD_FEC_TDATA2__FEC_TDATA_2	0x80000000
-				MX35_PAD_FEC_RDATA3__FEC_RDATA_3	0x80000000
-				MX35_PAD_FEC_TDATA3__FEC_TDATA_3	0x80000000
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX35_PAD_I2C1_CLK__I2C1_SCL		0x80000000
-				MX35_PAD_I2C1_DAT__I2C1_SDA		0x80000000
-			>;
-		};
-
-		pinctrl_tsc2007_1: tsc2007grp-1 {
-			fsl,pins = <MX35_PAD_ATA_DA2__GPIO3_2 0x80000000>;
-		};
-	};
-};
-
-&nfc {
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
deleted file mode 100644
index b1c11170ac25..000000000000
--- a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
+++ /dev/null
@@ -1,156 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "imx35-eukrea-cpuimx35.dtsi"
-
-/ {
-	model = "Eukrea CPUIMX35";
-	compatible = "eukrea,mbimxsd35-baseboard", "eukrea,cpuimx35", "fsl,imx35";
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_bp1>;
-
-		bp1 {
-			label = "BP1";
-			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_MISC>;
-			wakeup-source;
-			linux,input-type = <1>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_led1>;
-
-		led1 {
-			label = "led1";
-			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	sound {
-		compatible = "eukrea,asoc-tlv320";
-		eukrea,model = "imx35-eukrea-tlv320aic23";
-		ssi-controller = <&ssi1>;
-		fsl,mux-int-port = <1>;
-		fsl,mux-ext-port = <4>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&i2c1 {
-	tlv320aic23: codec@1a {
-		compatible = "ti,tlv320aic23";
-		reg = <0x1a>;
-	};
-};
-
-&iomuxc {
-	imx35-eukrea {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS	0x80000000
-				MX35_PAD_STXD4__AUDMUX_AUD4_TXD		0x80000000
-				MX35_PAD_SRXD4__AUDMUX_AUD4_RXD		0x80000000
-				MX35_PAD_SCK4__AUDMUX_AUD4_TXC		0x80000000
-			>;
-		};
-
-		pinctrl_bp1: bp1grp {
-			fsl,pins = <MX35_PAD_LD19__GPIO3_25  0x80000000>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX35_PAD_SD1_CMD__ESDHC1_CMD		0x80000000
-				MX35_PAD_SD1_CLK__ESDHC1_CLK		0x80000000
-				MX35_PAD_SD1_DATA0__ESDHC1_DAT0		0x80000000
-				MX35_PAD_SD1_DATA1__ESDHC1_DAT1		0x80000000
-				MX35_PAD_SD1_DATA2__ESDHC1_DAT2		0x80000000
-				MX35_PAD_SD1_DATA3__ESDHC1_DAT3		0x80000000
-				MX35_PAD_LD18__GPIO3_24			0x80000000 /* CD */
-			>;
-		};
-
-		pinctrl_led1: led1grp {
-			fsl,pins = <MX35_PAD_LD23__GPIO3_29  0x80000000>;
-		};
-
-		pinctrl_reg_lcd_3v3: reg-lcd-3v3 {
-			fsl,pins = <MX35_PAD_D3_CLS__GPIO1_4 0x80000000>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX35_PAD_TXD1__UART1_TXD_MUX		0x1c5
-				MX35_PAD_RXD1__UART1_RXD_MUX		0x1c5
-				MX35_PAD_CTS1__UART1_CTS		0x1c5
-				MX35_PAD_RTS1__UART1_RTS		0x1c5
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX35_PAD_RXD2__UART2_RXD_MUX		0x1c5
-				MX35_PAD_TXD2__UART2_TXD_MUX		0x1c5
-				MX35_PAD_RTS2__UART2_RTS		0x1c5
-				MX35_PAD_CTS2__UART2_CTS		0x1c5
-			>;
-		};
-	};
-};
-
-&ssi1 {
-	codec-handle = <&tlv320aic23>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbhost1 {
-	phy_type = "serial";
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbotg {
-	phy_type = "utmi";
-	dr_mode = "otg";
-	external-vbus-divider;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx35-pdk.dts b/arch/arm/boot/dts/imx35-pdk.dts
deleted file mode 100644
index ddce0a844758..000000000000
--- a/arch/arm/boot/dts/imx35-pdk.dts
+++ /dev/null
@@ -1,62 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
-// Copyright 2014 Freescale Semiconductor, Inc.
-
-/dts-v1/;
-#include "imx35.dtsi"
-
-/ {
-	model = "Freescale i.MX35 Product Development Kit";
-	compatible = "fsl,imx35-pdk", "fsl,imx35";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x8000000>,
-		      <0x90000000 0x8000000>;
-	};
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	status = "okay";
-};
-
-&iomuxc {
-	imx35-pdk {
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX35_PAD_SD1_CMD__ESDHC1_CMD		0x80000000
-				MX35_PAD_SD1_CLK__ESDHC1_CLK		0x80000000
-				MX35_PAD_SD1_DATA0__ESDHC1_DAT0		0x80000000
-				MX35_PAD_SD1_DATA1__ESDHC1_DAT1		0x80000000
-				MX35_PAD_SD1_DATA2__ESDHC1_DAT2		0x80000000
-				MX35_PAD_SD1_DATA3__ESDHC1_DAT3		0x80000000
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX35_PAD_TXD1__UART1_TXD_MUX		0x1c5
-				MX35_PAD_RXD1__UART1_RXD_MUX		0x1c5
-				MX35_PAD_CTS1__UART1_CTS		0x1c5
-				MX35_PAD_RTS1__UART1_RTS		0x1c5
-			>;
-		};
-	};
-};
-
-&nfc {
-	nand-bus-width = <16>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx50-evk.dts b/arch/arm/boot/dts/imx50-evk.dts
deleted file mode 100644
index 4ea5c23f181b..000000000000
--- a/arch/arm/boot/dts/imx50-evk.dts
+++ /dev/null
@@ -1,104 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2013 Greg Ungerer <gerg@uclinux.org>
-// Copyright 2011 Freescale Semiconductor, Inc.
-// Copyright 2011 Linaro Ltd.
-
-/dts-v1/;
-#include "imx50.dtsi"
-
-/ {
-	model = "Freescale i.MX50 Evaluation Kit";
-	compatible = "fsl,imx50-evk", "fsl,imx50";
-
-	memory@70000000 {
-		device_type = "memory";
-		reg = <0x70000000 0x80000000>;
-	};
-};
-
-&cspi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cspi>;
-	cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>, <&gpio4 13 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	flash: m25p32@1 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "m25p32", "jedec,spi-nor";
-		spi-max-frequency = <25000000>;
-		reg = <1>;
-
-		partition@0 {
-			label = "bootloader";
-			reg = <0x0 0x100000>;
-			read-only;
-		};
-
-		partition@100000 {
-			label = "kernel";
-			reg = <0x100000 0x300000>;
-		};
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&iomuxc {
-	imx50-evk {
-		pinctrl_cspi: cspigrp {
-			fsl,pins = <
-				MX50_PAD_CSPI_SCLK__CSPI_SCLK		0x00
-				MX50_PAD_CSPI_MISO__CSPI_MISO		0x00
-				MX50_PAD_CSPI_MOSI__CSPI_MOSI		0x00
-				MX50_PAD_CSPI_SS0__GPIO4_11		0xc4
-				MX50_PAD_ECSPI1_MOSI__GPIO4_13		0x84
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX50_PAD_SSI_RXFS__FEC_MDC		0x80
-				MX50_PAD_SSI_RXC__FEC_MDIO		0x80
-				MX50_PAD_DISP_D0__FEC_TX_CLK		0x80
-				MX50_PAD_DISP_D1__FEC_RX_ERR		0x80
-				MX50_PAD_DISP_D2__FEC_RX_DV		0x80
-				MX50_PAD_DISP_D3__FEC_RDATA_1		0x80
-				MX50_PAD_DISP_D4__FEC_RDATA_0		0x80
-				MX50_PAD_DISP_D5__FEC_TX_EN		0x80
-				MX50_PAD_DISP_D6__FEC_TDATA_1		0x80
-				MX50_PAD_DISP_D7__FEC_TDATA_0		0x80
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX50_PAD_UART1_TXD__UART1_TXD_MUX	0x1e4
-				MX50_PAD_UART1_RXD__UART1_RXD_MUX	0x1e4
-				MX50_PAD_UART1_RTS__UART1_RTS		0x1e4
-				MX50_PAD_UART1_CTS__UART1_CTS		0x1e4
-			>;
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbotg {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx51-apf51.dts b/arch/arm/boot/dts/imx51-apf51.dts
deleted file mode 100644
index ba28ffe06fe2..000000000000
--- a/arch/arm/boot/dts/imx51-apf51.dts
+++ /dev/null
@@ -1,84 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 Armadeus Systems - <support@armadeus.com>
- * Copyright 2012 Laurent Cans <laurent.cans@gmail.com>
- *
- * Based on mx51-babbage.dts
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- */
-
-/dts-v1/;
-#include "imx51.dtsi"
-
-/ {
-	model = "Armadeus Systems APF51 module";
-	compatible = "armadeus,imx51-apf51", "fsl,imx51";
-
-	memory@90000000 {
-		device_type = "memory";
-		reg = <0x90000000 0x20000000>;
-	};
-
-	clocks {
-		osc {
-			clock-frequency = <33554432>;
-		};
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "mii";
-	phy-reset-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <1>;
-	status = "okay";
-};
-
-&iomuxc {
-	imx51-apf51 {
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX51_PAD_DI_GP3__FEC_TX_ER		0x80000000
-				MX51_PAD_DI2_PIN4__FEC_CRS		0x80000000
-				MX51_PAD_DI2_PIN2__FEC_MDC		0x80000000
-				MX51_PAD_DI2_PIN3__FEC_MDIO		0x80000000
-				MX51_PAD_DI2_DISP_CLK__FEC_RDATA1	0x80000000
-				MX51_PAD_DI_GP4__FEC_RDATA2		0x80000000
-				MX51_PAD_DISP2_DAT0__FEC_RDATA3		0x80000000
-				MX51_PAD_DISP2_DAT1__FEC_RX_ER		0x80000000
-				MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x80000000
-				MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x80000000
-				MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x80000000
-				MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x80000000
-				MX51_PAD_DISP2_DAT10__FEC_COL		0x80000000
-				MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x80000000
-				MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x80000000
-				MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x80000000
-				MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x80000000
-				MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x80000000
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX51_PAD_UART3_RXD__UART3_RXD		0x1c5
-				MX51_PAD_UART3_TXD__UART3_TXD		0x1c5
-			>;
-		};
-	};
-};
-
-&nfc {
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx51-apf51dev.dts b/arch/arm/boot/dts/imx51-apf51dev.dts
deleted file mode 100644
index c66f274ba4e9..000000000000
--- a/arch/arm/boot/dts/imx51-apf51dev.dts
+++ /dev/null
@@ -1,217 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Armadeus Systems - <support@armadeus.com>
- */
-
-/* APF51Dev is a docking board for the APF51 SOM */
-#include "imx51-apf51.dts"
-
-/ {
-	model = "Armadeus Systems APF51Dev docking/development board";
-	compatible = "armadeus,imx51-apf51dev", "armadeus,imx51-apf51", "fsl,imx51";
-
-	backlight {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_backlight>;
-		compatible = "gpio-backlight";
-		gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
-		default-on;
-	};
-
-	disp1 {
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "bgr666";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu_disp1>;
-
-		display-timings {
-			lw700 {
-				native-mode;
-				clock-frequency = <33000033>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <96>;
-				hfront-porch = <96>;
-				vback-porch = <20>;
-				vfront-porch = <21>;
-				hsync-len = <64>;
-				vsync-len = <4>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-
-		port {
-			display_in: endpoint {
-				remote-endpoint = <&ipu_di0_disp1>;
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		user-key {
-			label = "user";
-			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-			linux,code = <256>; /* BTN_0 */
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		user {
-			label = "Heartbeat";
-			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>,
-		   <&gpio4 25 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&ecspi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	cs-gpios = <&gpio3 28 GPIO_ACTIVE_LOW>,
-		   <&gpio3 27 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&esdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc2>;
-	bus-width = <4>;
-	non-removable;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx51-apf51dev {
-		pinctrl_backlight: backlightgrp {
-			fsl,pins = <
-				MX51_PAD_DI1_D1_CS__GPIO3_4 0x1F5
-			>;
-		};
-
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX51_PAD_EIM_EB2__GPIO2_22   0x0C5
-				MX51_PAD_EIM_EB3__GPIO2_23   0x0C5
-				MX51_PAD_EIM_CS4__GPIO2_29   0x100
-				MX51_PAD_NANDF_D13__GPIO3_27 0x0C5
-				MX51_PAD_NANDF_D12__GPIO3_28 0x0C5
-				MX51_PAD_CSPI1_SS0__GPIO4_24 0x0C5
-				MX51_PAD_CSPI1_SS1__GPIO4_25 0x0C5
-				MX51_PAD_GPIO1_2__GPIO1_2    0x0C5
-				MX51_PAD_GPIO1_3__GPIO1_3    0x0C5
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
-				MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
-				MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
-			>;
-		};
-
-		pinctrl_ecspi2: ecspi2grp {
-			fsl,pins = <
-				MX51_PAD_NANDF_RB3__ECSPI2_MISO		0x185
-				MX51_PAD_NANDF_D15__ECSPI2_MOSI		0x185
-				MX51_PAD_NANDF_RB2__ECSPI2_SCLK		0x185
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
-				MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
-				MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
-				MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
-				MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
-				MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
-			>;
-		};
-
-		pinctrl_esdhc2: esdhc2grp {
-			fsl,pins = <
-				MX51_PAD_SD2_CMD__SD2_CMD		0x400020d5
-				MX51_PAD_SD2_CLK__SD2_CLK		0x20d5
-				MX51_PAD_SD2_DATA0__SD2_DATA0		0x20d5
-				MX51_PAD_SD2_DATA1__SD2_DATA1		0x20d5
-				MX51_PAD_SD2_DATA2__SD2_DATA2		0x20d5
-				MX51_PAD_SD2_DATA3__SD2_DATA3		0x20d5
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX51_PAD_EIM_D27__I2C2_SCL		0x400001ed
-				MX51_PAD_EIM_D24__I2C2_SDA		0x400001ed
-			>;
-		};
-
-		pinctrl_ipu_disp1: ipudisp1grp {
-			fsl,pins = <
-				MX51_PAD_DISP1_DAT0__DISP1_DAT0		0x5
-				MX51_PAD_DISP1_DAT1__DISP1_DAT1		0x5
-				MX51_PAD_DISP1_DAT2__DISP1_DAT2		0x5
-				MX51_PAD_DISP1_DAT3__DISP1_DAT3		0x5
-				MX51_PAD_DISP1_DAT4__DISP1_DAT4		0x5
-				MX51_PAD_DISP1_DAT5__DISP1_DAT5		0x5
-				MX51_PAD_DISP1_DAT6__DISP1_DAT6		0x5
-				MX51_PAD_DISP1_DAT7__DISP1_DAT7		0x5
-				MX51_PAD_DISP1_DAT8__DISP1_DAT8		0x5
-				MX51_PAD_DISP1_DAT9__DISP1_DAT9		0x5
-				MX51_PAD_DISP1_DAT10__DISP1_DAT10	0x5
-				MX51_PAD_DISP1_DAT11__DISP1_DAT11	0x5
-				MX51_PAD_DISP1_DAT12__DISP1_DAT12	0x5
-				MX51_PAD_DISP1_DAT13__DISP1_DAT13	0x5
-				MX51_PAD_DISP1_DAT14__DISP1_DAT14	0x5
-				MX51_PAD_DISP1_DAT15__DISP1_DAT15	0x5
-				MX51_PAD_DISP1_DAT16__DISP1_DAT16	0x5
-				MX51_PAD_DISP1_DAT17__DISP1_DAT17	0x5
-				MX51_PAD_DISP1_DAT18__DISP1_DAT18	0x5
-				MX51_PAD_DISP1_DAT19__DISP1_DAT19	0x5
-				MX51_PAD_DISP1_DAT20__DISP1_DAT20	0x5
-				MX51_PAD_DISP1_DAT21__DISP1_DAT21	0x5
-				MX51_PAD_DISP1_DAT22__DISP1_DAT22	0x5
-				MX51_PAD_DISP1_DAT23__DISP1_DAT23	0x5
-				MX51_PAD_DI1_PIN2__DI1_PIN2		0x5
-				MX51_PAD_DI1_PIN3__DI1_PIN3		0x5
-			>;
-		};
-	};
-};
-
-&ipu_di0_disp1 {
-	remote-endpoint = <&display_in>;
-};
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
deleted file mode 100644
index 552196d8a60a..000000000000
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ /dev/null
@@ -1,726 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2011 Freescale Semiconductor, Inc.
-// Copyright 2011 Linaro Ltd.
-
-/dts-v1/;
-#include "imx51.dtsi"
-
-/ {
-	model = "Freescale i.MX51 Babbage Board";
-	compatible = "fsl,imx51-babbage", "fsl,imx51";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	memory@90000000 {
-		device_type = "memory";
-		reg = <0x90000000 0x20000000>;
-	};
-
-	ckih1 {
-		clock-frequency = <22579200>;
-	};
-
-	clk_osc: clk-osc {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <26000000>;
-	};
-
-	clk_osc_gate: clk-osc-gate {
-		compatible = "gpio-gate-clock";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_clk26mhz_osc>;
-		clocks = <&clk_osc>;
-		#clock-cells = <0>;
-		enable-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
-	};
-
-	clk_audio: clk-audio {
-		compatible = "gpio-gate-clock";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_clk26mhz_audio>;
-		clocks = <&clk_osc_gate>;
-		#clock-cells = <0>;
-		enable-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
-	};
-
-	clk_usb: clk-usb {
-		compatible = "gpio-gate-clock";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_clk26mhz_usb>;
-		clocks = <&clk_osc_gate>;
-		#clock-cells = <0>;
-		enable-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-	};
-
-	display1: disp1 {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu_disp1>;
-
-		port@0 {
-		reg = <0>;
-
-			display0_in: endpoint {
-				remote-endpoint = <&ipu_di0_disp1>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			parallel_display_out: endpoint {
-				remote-endpoint = <&tfp410_in>;
-			};
-		};
-	};
-
-	display2: disp2 {
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "rgb565";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu_disp2>;
-		status = "disabled";
-		display-timings {
-			native-mode = <&timing1>;
-			timing1: claawvga {
-				clock-frequency = <27000000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <40>;
-				hfront-porch = <60>;
-				vback-porch = <10>;
-				vfront-porch = <10>;
-				hsync-len = <20>;
-				vsync-len = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-
-		port {
-			display1_in: endpoint {
-				remote-endpoint = <&ipu_di1_disp2>;
-			};
-		};
-	};
-
-	dvi-connector {
-		compatible = "dvi-connector";
-		digital;
-
-		port {
-			dvi_connector_in: endpoint {
-				remote-endpoint = <&tfp410_out>;
-			};
-		};
-	};
-
-	dvi-encoder {
-		compatible = "ti,tfp410";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tfp410_in: endpoint {
-					remote-endpoint = <&parallel_display_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tfp410_out: endpoint {
-					remote-endpoint = <&dvi_connector_in>;
-				};
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		power {
-			label = "Power Button";
-			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led-diagnostic {
-			label = "diagnostic";
-			gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_hub_reset: regulator@0 {
-			compatible = "regulator-fixed";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usbotgreg>;
-			reg = <0>;
-			regulator-name = "hub_reset";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx51-babbage-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx51-babbage-sgtl5000";
-		ssi-controller = <&ssi2>;
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <2>;
-		mux-ext-port = <3>;
-	};
-
-	usbphy1: usbphy1 {
-		compatible = "usb-nop-xceiv";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbh1reg>;
-		clocks = <&clk_usb>;
-		clock-names = "main_clk";
-		reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
-		vcc-supply = <&vusb_reg>;
-		#phy-cells = <0>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
-		   <&gpio4 25 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	pmic: mc13892@0 {
-		compatible = "fsl,mc13892";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pmic>;
-		spi-max-frequency = <6000000>;
-		spi-cs-high;
-		reg = <0>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
-		fsl,mc13xxx-uses-adc;
-		fsl,mc13xxx-uses-rtc;
-
-		regulators {
-			sw1_reg: sw1 {
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1375000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1850000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3_reg: sw3 {
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1850000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1850000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vpll_reg: vpll {
-				regulator-min-microvolt = <1050000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vdig_reg: vdig {
-				regulator-min-microvolt = <1650000>;
-				regulator-max-microvolt = <1650000>;
-				regulator-boot-on;
-			};
-
-			vsd_reg: vsd {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3150000>;
-			};
-
-			vusb_reg: vusb {
-				regulator-boot-on;
-			};
-
-			vusb2_reg: vusb2 {
-				regulator-min-microvolt = <2400000>;
-				regulator-max-microvolt = <2775000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vvideo_reg: vvideo {
-				regulator-min-microvolt = <2775000>;
-				regulator-max-microvolt = <2775000>;
-			};
-
-			vaudio_reg: vaudio {
-				regulator-min-microvolt = <2300000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			vcam_reg: vcam {
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3150000>;
-				regulator-always-on;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <2900000>;
-				regulator-always-on;
-			};
-		};
-	};
-
-	flash: at45db321d@1 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
-		spi-max-frequency = <25000000>;
-		reg = <1>;
-
-		partition@0 {
-			label = "U-Boot";
-			reg = <0x0 0x40000>;
-			read-only;
-		};
-
-		partition@40000 {
-			label = "Kernel";
-			reg = <0x40000 0x3c0000>;
-		};
-	};
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&esdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc2>;
-	cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "mii";
-	phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <1>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	sgtl5000: codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		#sound-dai-cells = <0>;
-		clocks = <&clk_audio>;
-		VDDA-supply = <&vdig_reg>;
-		VDDIO-supply = <&vvideo_reg>;
-	};
-};
-
-&ipu_di0_disp1 {
-	remote-endpoint = <&display0_in>;
-};
-
-&ipu_di1_disp2 {
-	remote-endpoint = <&display1_in>;
-};
-
-&kpp {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_kpp>;
-	linux,keymap = <
-		MATRIX_KEY(0, 0, KEY_UP)
-		MATRIX_KEY(0, 1, KEY_DOWN)
-		MATRIX_KEY(0, 2, KEY_VOLUMEDOWN)
-		MATRIX_KEY(0, 3, KEY_HOME)
-		MATRIX_KEY(1, 0, KEY_RIGHT)
-		MATRIX_KEY(1, 1, KEY_LEFT)
-		MATRIX_KEY(1, 2, KEY_ENTER)
-		MATRIX_KEY(1, 3, KEY_VOLUMEUP)
-		MATRIX_KEY(2, 0, KEY_F6)
-		MATRIX_KEY(2, 1, KEY_F8)
-		MATRIX_KEY(2, 2, KEY_F9)
-		MATRIX_KEY(2, 3, KEY_F10)
-		MATRIX_KEY(3, 0, KEY_F1)
-		MATRIX_KEY(3, 1, KEY_F2)
-		MATRIX_KEY(3, 2, KEY_F3)
-		MATRIX_KEY(3, 3, KEY_POWER)
-	>;
-	status = "okay";
-};
-
-&pmu {
-	secure-reg-access;
-};
-
-&ssi2 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbh1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh1>;
-	vbus-supply = <&reg_hub_reset>;
-	fsl,usbphy = <&usbphy1>;
-	phy_type = "ulpi";
-	status = "okay";
-};
-
-&usbphy0 {
-	vcc-supply = <&vusb_reg>;
-};
-
-&usbotg {
-	dr_mode = "otg";
-	disable-over-current;
-	phy_type = "utmi_wide";
-	status = "okay";
-};
-
-&iomuxc {
-	imx51-babbage {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX51_PAD_AUD3_BB_TXD__AUD3_TXD		0x80000000
-				MX51_PAD_AUD3_BB_RXD__AUD3_RXD		0x80000000
-				MX51_PAD_AUD3_BB_CK__AUD3_TXC		0x80000000
-				MX51_PAD_AUD3_BB_FS__AUD3_TXFS		0x80000000
-			>;
-		};
-
-		pinctrl_clk26mhz_audio: clk26mhzaudiocgrp {
-			fsl,pins = <
-				MX51_PAD_CSPI1_RDY__GPIO4_26		0x85
-			>;
-		};
-
-		pinctrl_clk26mhz_osc: clk26mhzoscgrp {
-			fsl,pins = <
-				MX51_PAD_DI1_PIN12__GPIO3_1		0x85
-			>;
-		};
-
-		pinctrl_clk26mhz_usb: clk26mhzusbgrp {
-			fsl,pins = <
-				MX51_PAD_EIM_D17__GPIO2_1		0x85
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
-				MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
-				MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
-				MX51_PAD_CSPI1_SS0__GPIO4_24		0x85 /* CS0 */
-				MX51_PAD_CSPI1_SS1__GPIO4_25		0x85 /* CS1 */
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
-				MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
-				MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
-				MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
-				MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
-				MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
-				MX51_PAD_GPIO1_0__GPIO1_0		0x100
-				MX51_PAD_GPIO1_1__GPIO1_1		0x100
-			>;
-		};
-
-		pinctrl_esdhc2: esdhc2grp {
-			fsl,pins = <
-				MX51_PAD_SD2_CMD__SD2_CMD		0x400020d5
-				MX51_PAD_SD2_CLK__SD2_CLK		0x20d5
-				MX51_PAD_SD2_DATA0__SD2_DATA0		0x20d5
-				MX51_PAD_SD2_DATA1__SD2_DATA1		0x20d5
-				MX51_PAD_SD2_DATA2__SD2_DATA2		0x20d5
-				MX51_PAD_SD2_DATA3__SD2_DATA3		0x20d5
-				MX51_PAD_GPIO1_5__GPIO1_5		0x100 /* WP */
-				MX51_PAD_GPIO1_6__GPIO1_6		0x100 /* CD */
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX51_PAD_EIM_EB2__FEC_MDIO		0x000001f5
-				MX51_PAD_EIM_EB3__FEC_RDATA1		0x00000085
-				MX51_PAD_EIM_CS2__FEC_RDATA2		0x00000085
-				MX51_PAD_EIM_CS3__FEC_RDATA3		0x00000085
-				MX51_PAD_EIM_CS4__FEC_RX_ER		0x00000180
-				MX51_PAD_EIM_CS5__FEC_CRS		0x00000180
-				MX51_PAD_NANDF_RB2__FEC_COL		0x00000180
-				MX51_PAD_NANDF_RB3__FEC_RX_CLK		0x00000180
-				MX51_PAD_NANDF_D9__FEC_RDATA0		0x00002180
-				MX51_PAD_NANDF_D8__FEC_TDATA0		0x00002004
-				MX51_PAD_NANDF_CS2__FEC_TX_ER		0x00002004
-				MX51_PAD_NANDF_CS3__FEC_MDC		0x00002004
-				MX51_PAD_NANDF_CS4__FEC_TDATA1		0x00002004
-				MX51_PAD_NANDF_CS5__FEC_TDATA2		0x00002004
-				MX51_PAD_NANDF_CS6__FEC_TDATA3		0x00002004
-				MX51_PAD_NANDF_CS7__FEC_TX_EN		0x00002004
-				MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK	0x00002180
-				MX51_PAD_NANDF_D11__FEC_RX_DV		0x000020a4
-				MX51_PAD_EIM_A20__GPIO2_14		0x00000085 /* Phy Reset */
-			>;
-		};
-
-		pinctrl_gpio_keys: gpiokeysgrp {
-			fsl,pins = <
-				MX51_PAD_EIM_A27__GPIO2_21		0x5
-			>;
-		};
-
-		pinctrl_gpio_leds: gpioledsgrp {
-			fsl,pins = <
-				MX51_PAD_EIM_D22__GPIO2_6		0x80000000
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX51_PAD_EIM_D19__I2C1_SCL		0x400001ed
-				MX51_PAD_EIM_D16__I2C1_SDA		0x400001ed
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX51_PAD_KEY_COL4__I2C2_SCL		0x400001ed
-				MX51_PAD_KEY_COL5__I2C2_SDA		0x400001ed
-			>;
-		};
-
-		pinctrl_ipu_disp1: ipudisp1grp {
-			fsl,pins = <
-				MX51_PAD_DISP1_DAT0__DISP1_DAT0		0x5
-				MX51_PAD_DISP1_DAT1__DISP1_DAT1		0x5
-				MX51_PAD_DISP1_DAT2__DISP1_DAT2		0x5
-				MX51_PAD_DISP1_DAT3__DISP1_DAT3		0x5
-				MX51_PAD_DISP1_DAT4__DISP1_DAT4		0x5
-				MX51_PAD_DISP1_DAT5__DISP1_DAT5		0x5
-				MX51_PAD_DISP1_DAT6__DISP1_DAT6		0x5
-				MX51_PAD_DISP1_DAT7__DISP1_DAT7		0x5
-				MX51_PAD_DISP1_DAT8__DISP1_DAT8		0x5
-				MX51_PAD_DISP1_DAT9__DISP1_DAT9		0x5
-				MX51_PAD_DISP1_DAT10__DISP1_DAT10	0x5
-				MX51_PAD_DISP1_DAT11__DISP1_DAT11	0x5
-				MX51_PAD_DISP1_DAT12__DISP1_DAT12	0x5
-				MX51_PAD_DISP1_DAT13__DISP1_DAT13	0x5
-				MX51_PAD_DISP1_DAT14__DISP1_DAT14	0x5
-				MX51_PAD_DISP1_DAT15__DISP1_DAT15	0x5
-				MX51_PAD_DISP1_DAT16__DISP1_DAT16	0x5
-				MX51_PAD_DISP1_DAT17__DISP1_DAT17	0x5
-				MX51_PAD_DISP1_DAT18__DISP1_DAT18	0x5
-				MX51_PAD_DISP1_DAT19__DISP1_DAT19	0x5
-				MX51_PAD_DISP1_DAT20__DISP1_DAT20	0x5
-				MX51_PAD_DISP1_DAT21__DISP1_DAT21	0x5
-				MX51_PAD_DISP1_DAT22__DISP1_DAT22	0x5
-				MX51_PAD_DISP1_DAT23__DISP1_DAT23	0x5
-				MX51_PAD_DI1_PIN2__DI1_PIN2		0x5
-				MX51_PAD_DI1_PIN3__DI1_PIN3		0x5
-			>;
-		};
-
-		pinctrl_ipu_disp2: ipudisp2grp {
-			fsl,pins = <
-				MX51_PAD_DISP2_DAT0__DISP2_DAT0		0x5
-				MX51_PAD_DISP2_DAT1__DISP2_DAT1		0x5
-				MX51_PAD_DISP2_DAT2__DISP2_DAT2		0x5
-				MX51_PAD_DISP2_DAT3__DISP2_DAT3		0x5
-				MX51_PAD_DISP2_DAT4__DISP2_DAT4		0x5
-				MX51_PAD_DISP2_DAT5__DISP2_DAT5		0x5
-				MX51_PAD_DISP2_DAT6__DISP2_DAT6		0x5
-				MX51_PAD_DISP2_DAT7__DISP2_DAT7		0x5
-				MX51_PAD_DISP2_DAT8__DISP2_DAT8		0x5
-				MX51_PAD_DISP2_DAT9__DISP2_DAT9		0x5
-				MX51_PAD_DISP2_DAT10__DISP2_DAT10	0x5
-				MX51_PAD_DISP2_DAT11__DISP2_DAT11	0x5
-				MX51_PAD_DISP2_DAT12__DISP2_DAT12	0x5
-				MX51_PAD_DISP2_DAT13__DISP2_DAT13	0x5
-				MX51_PAD_DISP2_DAT14__DISP2_DAT14	0x5
-				MX51_PAD_DISP2_DAT15__DISP2_DAT15	0x5
-				MX51_PAD_DI2_PIN2__DI2_PIN2		0x5
-				MX51_PAD_DI2_PIN3__DI2_PIN3		0x5
-				MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK	0x5
-				MX51_PAD_DI_GP4__DI2_PIN15		0x5
-			>;
-		};
-
-		pinctrl_kpp: kppgrp {
-			fsl,pins = <
-				MX51_PAD_KEY_ROW0__KEY_ROW0		0xe0
-				MX51_PAD_KEY_ROW1__KEY_ROW1		0xe0
-				MX51_PAD_KEY_ROW2__KEY_ROW2		0xe0
-				MX51_PAD_KEY_ROW3__KEY_ROW3		0xe0
-				MX51_PAD_KEY_COL0__KEY_COL0		0xe8
-				MX51_PAD_KEY_COL1__KEY_COL1		0xe8
-				MX51_PAD_KEY_COL2__KEY_COL2		0xe8
-				MX51_PAD_KEY_COL3__KEY_COL3		0xe8
-			>;
-		};
-
-		pinctrl_pmic: pmicgrp {
-			fsl,pins = <
-				MX51_PAD_GPIO1_8__GPIO1_8		0xe5 /* IRQ */
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
-				MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
-				MX51_PAD_UART1_RTS__UART1_RTS		0x1c5
-				MX51_PAD_UART1_CTS__UART1_CTS		0x1c5
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX51_PAD_UART2_RXD__UART2_RXD		0x1c5
-				MX51_PAD_UART2_TXD__UART2_TXD		0x1c5
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX51_PAD_EIM_D25__UART3_RXD		0x1c5
-				MX51_PAD_EIM_D26__UART3_TXD		0x1c5
-				MX51_PAD_EIM_D27__UART3_RTS		0x1c5
-				MX51_PAD_EIM_D24__UART3_CTS		0x1c5
-			>;
-		};
-
-		pinctrl_usbh1: usbh1grp {
-			fsl,pins = <
-				MX51_PAD_USBH1_CLK__USBH1_CLK		0x80000000
-				MX51_PAD_USBH1_DIR__USBH1_DIR		0x80000000
-				MX51_PAD_USBH1_NXT__USBH1_NXT		0x80000000
-				MX51_PAD_USBH1_DATA0__USBH1_DATA0	0x80000000
-				MX51_PAD_USBH1_DATA1__USBH1_DATA1	0x80000000
-				MX51_PAD_USBH1_DATA2__USBH1_DATA2	0x80000000
-				MX51_PAD_USBH1_DATA3__USBH1_DATA3	0x80000000
-				MX51_PAD_USBH1_DATA4__USBH1_DATA4	0x80000000
-				MX51_PAD_USBH1_DATA5__USBH1_DATA5	0x80000000
-				MX51_PAD_USBH1_DATA6__USBH1_DATA6	0x80000000
-				MX51_PAD_USBH1_DATA7__USBH1_DATA7	0x80000000
-			>;
-		};
-
-		pinctrl_usbh1reg: usbh1reggrp {
-			fsl,pins = <
-				MX51_PAD_EIM_D21__GPIO2_5		0x85
-			>;
-		};
-
-		pinctrl_usbotgreg: usbotgreggrp {
-			fsl,pins = <
-				MX51_PAD_GPIO1_7__GPIO1_7		0x85
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts b/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts
deleted file mode 100644
index aab8d6f137c3..000000000000
--- a/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts
+++ /dev/null
@@ -1,118 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
- */
-
-#include "imx51-digi-connectcore-som.dtsi"
-
-/ {
-	model = "Digi ConnectCore CC(W)-MX51 JSK";
-	compatible = "digi,connectcore-ccxmx51-jsk",
-		     "digi,connectcore-ccxmx51-som", "fsl,imx51";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-};
-
-&esdhc1 {
-	status = "okay";
-};
-
-&owire {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_owire>;
-	status = "okay";
-};
-
-&pmic {
-	fsl,mc13xxx-uses-rtc;
-
-	regulators {
-		vcoincell_reg: vcoincell {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-			regulator-always-on;
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&usbotg {
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&usbh1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh1>;
-	dr_mode = "host";
-	phy_type = "ulpi";
-	disable-over-current;
-	status = "okay";
-};
-
-&iomuxc {
-	imx51-digi-connectcore-jsk {
-		pinctrl_owire: owiregrp {
-			fsl,pins = <
-				MX51_PAD_OWIRE_LINE__OWIRE_LINE		0x40000000
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
-				MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX51_PAD_UART2_RXD__UART2_RXD		0x1c5
-				MX51_PAD_UART2_TXD__UART2_TXD		0x1c5
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX51_PAD_UART3_RXD__UART3_RXD		0x1c5
-				MX51_PAD_UART3_TXD__UART3_TXD		0x1c5
-			>;
-		};
-
-		pinctrl_usbh1: usbh1grp {
-			fsl,pins = <
-				MX51_PAD_USBH1_DATA0__USBH1_DATA0	0x1e5
-				MX51_PAD_USBH1_DATA1__USBH1_DATA1	0x1e5
-				MX51_PAD_USBH1_DATA2__USBH1_DATA2	0x1e5
-				MX51_PAD_USBH1_DATA3__USBH1_DATA3	0x1e5
-				MX51_PAD_USBH1_DATA4__USBH1_DATA4	0x1e5
-				MX51_PAD_USBH1_DATA5__USBH1_DATA5	0x1e5
-				MX51_PAD_USBH1_DATA6__USBH1_DATA6	0x1e5
-				MX51_PAD_USBH1_DATA7__USBH1_DATA7	0x1e5
-				MX51_PAD_USBH1_CLK__USBH1_CLK		0x1e5
-				MX51_PAD_USBH1_DIR__USBH1_DIR		0x1e5
-				MX51_PAD_USBH1_NXT__USBH1_NXT		0x1e5
-				MX51_PAD_USBH1_STP__USBH1_STP		0x1e5
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi
deleted file mode 100644
index 7d4970417dce..000000000000
--- a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi
+++ /dev/null
@@ -1,389 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
- */
-
-/dts-v1/;
-#include "imx51.dtsi"
-
-/ {
-	model = "Digi ConnectCore CC(W)-MX51";
-	compatible = "digi,connectcore-ccxmx51-som", "fsl,imx51";
-
-	memory@90000000 {
-		device_type = "memory";
-		reg = <0x90000000 0x08000000>;
-	};
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-
-	pmic: mc13892@0 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_mc13892>;
-		compatible = "fsl,mc13892";
-		spi-max-frequency = <16000000>;
-		spi-cs-high;
-		reg = <0>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
-
-		regulators {
-			sw1_reg: sw1 {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <1225000>;
-				regulator-max-microvolt = <1225000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3_reg: sw3 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst { };
-
-			viohi_reg: viohi {
-				regulator-always-on;
-			};
-
-			vpll_reg: vpll {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			vdig_reg: vdig {
-				regulator-min-microvolt = <1250000>;
-				regulator-max-microvolt = <1250000>;
-				regulator-always-on;
-			};
-
-			vsd_reg: vsd {
-				regulator-min-microvolt = <3150000>;
-				regulator-max-microvolt = <3150000>;
-				regulator-always-on;
-			};
-
-			vusb2_reg: vusb2 {
-				regulator-min-microvolt = <2600000>;
-				regulator-max-microvolt = <2600000>;
-				regulator-always-on;
-			};
-
-			vvideo_reg: vvideo {
-				regulator-min-microvolt = <2775000>;
-				regulator-max-microvolt = <2775000>;
-				regulator-always-on;
-			};
-
-			vaudio_reg: vaudio {
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-			};
-
-			vcam_reg: vcam {
-				regulator-min-microvolt = <2750000>;
-				regulator-max-microvolt = <2750000>;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <3150000>;
-				regulator-max-microvolt = <3150000>;
-				regulator-always-on;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			vusb_reg: vusb {
-				regulator-always-on;
-			};
-
-			gpo1_reg: gpo1 { };
-
-			gpo2_reg: gpo2 { };
-
-			gpo3_reg: gpo3 { };
-
-			gpo4_reg: gpo4 { };
-
-			pwgt2spi_reg: pwgt2spi {
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	max-frequency = <50000000>;
-	bus-width = <1>;
-};
-
-&esdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc2>;
-	cap-sdio-irq;
-	wakeup-source;
-	keep-power-in-suspend;
-	max-frequency = <50000000>;
-	no-1-8-v;
-	non-removable;
-	vmmc-supply = <&gpo4_reg>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "mii";
-	phy-supply = <&gpo3_reg>;
-	/* Pins shared with LCD2, keep status disabled */
-};
-
-&i2c2 {
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	pinctrl-1 = <&pinctrl_i2c2_gpio>;
-	clock-frequency = <400000>;
-	scl-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-
-	mma7455l@1d {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_mma7455l>;
-		compatible = "fsl,mma7455l";
-		reg = <0x1d>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <7 IRQ_TYPE_LEVEL_HIGH>, <6 IRQ_TYPE_LEVEL_HIGH>;
-	};
-};
-
-&nfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nfc>;
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&usbotg {
-	phy_type = "utmi_wide";
-	disable-over-current;
-	/* Device role is not known, keep status disabled */
-};
-
-&weim {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_weim>;
-	status = "okay";
-
-	lan9221: ethernet@5,0 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_lan9221>;
-		compatible = "smsc,lan9221", "smsc,lan9115";
-		reg = <5 0x00000000 0x1000>;
-		fsl,weim-cs-timing = <
-			0x00420081 0x00000000
-			0x32260000 0x00000000
-			0x72080f00 0x00000000
-		>;
-		clocks = <&clks IMX5_CLK_DUMMY>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
-		phy-mode = "mii";
-		reg-io-width = <2>;
-		smsc,irq-push-pull;
-		vdd33a-supply = <&gpo2_reg>;
-		vddvario-supply = <&gpo2_reg>;
-	};
-};
-
-&iomuxc {
-	imx51-digi-connectcore-som {
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
-				MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
-				MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
-				MX51_PAD_CSPI1_SS0__GPIO4_24		0x85 /* CS0 */
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX51_PAD_SD1_CLK__SD1_CLK		0x400021d5
-				MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
-				MX51_PAD_SD1_DATA0__SD1_DATA0		0x400020d5
-			>;
-		};
-
-		pinctrl_esdhc2: esdhc2grp {
-			fsl,pins = <
-				MX51_PAD_SD2_CMD__SD2_CMD		0x400020d5
-				MX51_PAD_SD2_CLK__SD2_CLK		0x20d5
-				MX51_PAD_SD2_DATA0__SD2_DATA0		0x20d5
-				MX51_PAD_SD2_DATA1__SD2_DATA1		0x20d5
-				MX51_PAD_SD2_DATA2__SD2_DATA2		0x20d5
-				MX51_PAD_SD2_DATA3__SD2_DATA3		0x20d5
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX51_PAD_DI_GP3__FEC_TX_ER		0x80000000
-				MX51_PAD_DI2_PIN4__FEC_CRS		0x80000000
-				MX51_PAD_DI2_PIN2__FEC_MDC		0x80000000
-				MX51_PAD_DI2_PIN3__FEC_MDIO		0x80000000
-				MX51_PAD_DI2_DISP_CLK__FEC_RDATA1	0x80000000
-				MX51_PAD_DI_GP4__FEC_RDATA2		0x80000000
-				MX51_PAD_DISP2_DAT0__FEC_RDATA3		0x80000000
-				MX51_PAD_DISP2_DAT1__FEC_RX_ER		0x80000000
-				MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x80000000
-				MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x80000000
-				MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x80000000
-				MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x80000000
-				MX51_PAD_DISP2_DAT10__FEC_COL		0x80000000
-				MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x80000000
-				MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x80000000
-				MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x80000000
-				MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x80000000
-				MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x80000000
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX51_PAD_GPIO1_2__I2C2_SCL		0x400001ed
-				MX51_PAD_GPIO1_3__I2C2_SDA		0x400001ed
-			>;
-		};
-
-		pinctrl_i2c2_gpio: i2c2gpiogrp {
-			fsl,pins = <
-				MX51_PAD_GPIO1_2__GPIO1_2		0x400001ed
-				MX51_PAD_GPIO1_3__GPIO1_3		0x400001ed
-			>;
-		};
-
-		pinctrl_nfc: nfcgrp {
-			fsl,pins = <
-				MX51_PAD_NANDF_D0__NANDF_D0		0x80000000
-				MX51_PAD_NANDF_D1__NANDF_D1		0x80000000
-				MX51_PAD_NANDF_D2__NANDF_D2		0x80000000
-				MX51_PAD_NANDF_D3__NANDF_D3		0x80000000
-				MX51_PAD_NANDF_D4__NANDF_D4		0x80000000
-				MX51_PAD_NANDF_D5__NANDF_D5		0x80000000
-				MX51_PAD_NANDF_D6__NANDF_D6		0x80000000
-				MX51_PAD_NANDF_D7__NANDF_D7		0x80000000
-				MX51_PAD_NANDF_ALE__NANDF_ALE		0x80000000
-				MX51_PAD_NANDF_CLE__NANDF_CLE		0x80000000
-				MX51_PAD_NANDF_RE_B__NANDF_RE_B		0x80000000
-				MX51_PAD_NANDF_WE_B__NANDF_WE_B		0x80000000
-				MX51_PAD_NANDF_WP_B__NANDF_WP_B		0x80000000
-				MX51_PAD_NANDF_CS0__NANDF_CS0		0x80000000
-				MX51_PAD_NANDF_RB0__NANDF_RB0		0x80000000
-			>;
-		};
-
-		pinctrl_lan9221: lan9221grp {
-			fsl,pins = <
-				MX51_PAD_GPIO1_9__GPIO1_9		0xe5 /* IRQ */
-			>;
-		};
-
-		pinctrl_mc13892: mc13892grp {
-			fsl,pins = <
-				MX51_PAD_GPIO1_5__GPIO1_5		0xe5 /* IRQ */
-			>;
-		};
-
-		pinctrl_mma7455l: mma7455lgrp {
-			fsl,pins = <
-				MX51_PAD_GPIO1_7__GPIO1_7		0xe5 /* IRQ1 */
-				MX51_PAD_GPIO1_6__GPIO1_6		0xe5 /* IRQ2 */
-			>;
-		};
-
-		pinctrl_weim: weimgrp {
-			fsl,pins = <
-				MX51_PAD_EIM_DA0__EIM_DA0		0x80000000
-				MX51_PAD_EIM_DA1__EIM_DA1		0x80000000
-				MX51_PAD_EIM_DA2__EIM_DA2		0x80000000
-				MX51_PAD_EIM_DA3__EIM_DA3		0x80000000
-				MX51_PAD_EIM_DA4__EIM_DA4		0x80000000
-				MX51_PAD_EIM_DA5__EIM_DA5		0x80000000
-				MX51_PAD_EIM_DA6__EIM_DA6		0x80000000
-				MX51_PAD_EIM_DA7__EIM_DA7		0x80000000
-				MX51_PAD_EIM_DA8__EIM_DA8		0x80000000
-				MX51_PAD_EIM_DA9__EIM_DA9		0x80000000
-				MX51_PAD_EIM_DA10__EIM_DA10		0x80000000
-				MX51_PAD_EIM_DA11__EIM_DA11		0x80000000
-				MX51_PAD_EIM_DA12__EIM_DA12		0x80000000
-				MX51_PAD_EIM_DA13__EIM_DA13		0x80000000
-				MX51_PAD_EIM_DA14__EIM_DA14		0x80000000
-				MX51_PAD_EIM_DA15__EIM_DA15		0x80000000
-				MX51_PAD_EIM_A16__EIM_A16		0x80000000
-				MX51_PAD_EIM_A17__EIM_A17		0x80000000
-				MX51_PAD_EIM_A18__EIM_A18		0x80000000
-				MX51_PAD_EIM_A19__EIM_A19		0x80000000
-				MX51_PAD_EIM_A20__EIM_A20		0x80000000
-				MX51_PAD_EIM_A21__EIM_A21		0x80000000
-				MX51_PAD_EIM_A22__EIM_A22		0x80000000
-				MX51_PAD_EIM_A23__EIM_A23		0x80000000
-				MX51_PAD_EIM_A24__EIM_A24		0x80000000
-				MX51_PAD_EIM_A25__EIM_A25		0x80000000
-				MX51_PAD_EIM_A26__EIM_A26		0x80000000
-				MX51_PAD_EIM_A27__EIM_A27		0x80000000
-				MX51_PAD_EIM_D16__EIM_D16		0x80000000
-				MX51_PAD_EIM_D17__EIM_D17		0x80000000
-				MX51_PAD_EIM_D18__EIM_D18		0x80000000
-				MX51_PAD_EIM_D19__EIM_D19		0x80000000
-				MX51_PAD_EIM_D20__EIM_D20		0x80000000
-				MX51_PAD_EIM_D21__EIM_D21		0x80000000
-				MX51_PAD_EIM_D22__EIM_D22		0x80000000
-				MX51_PAD_EIM_D23__EIM_D23		0x80000000
-				MX51_PAD_EIM_D24__EIM_D24		0x80000000
-				MX51_PAD_EIM_D25__EIM_D25		0x80000000
-				MX51_PAD_EIM_D26__EIM_D26		0x80000000
-				MX51_PAD_EIM_D27__EIM_D27		0x80000000
-				MX51_PAD_EIM_D28__EIM_D28		0x80000000
-				MX51_PAD_EIM_D29__EIM_D29		0x80000000
-				MX51_PAD_EIM_D30__EIM_D30		0x80000000
-				MX51_PAD_EIM_D31__EIM_D31		0x80000000
-				MX51_PAD_EIM_OE__EIM_OE			0x80000000
-				MX51_PAD_EIM_DTACK__EIM_DTACK		0x80000000
-				MX51_PAD_EIM_LBA__EIM_LBA		0x80000000
-				MX51_PAD_EIM_CS5__EIM_CS5		0x80000000 /* CS5 */
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi b/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi
deleted file mode 100644
index c2a929ba8ceb..000000000000
--- a/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi
+++ /dev/null
@@ -1,92 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- */
-
-#include "imx51.dtsi"
-
-/ {
-	model = "Eukrea CPUIMX51";
-	compatible = "eukrea,cpuimx51", "fsl,imx51";
-
-	memory@90000000 {
-		device_type = "memory";
-		reg = <0x90000000 0x10000000>; /* 256M */
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pcf8563@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-
-	tsc2007: tsc2007@49 {
-		compatible = "ti,tsc2007";
-		gpios = <&gpio4 0 1>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <0x0 0x8>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tsc2007_1>;
-		reg = <0x49>;
-		ti,x-plate-ohms = <180>;
-	};
-};
-
-&iomuxc {
-	imx51-eukrea {
-		pinctrl_tsc2007_1: tsc2007grp-1 {
-			fsl,pins = <
-				MX51_PAD_GPIO_NAND__GPIO_NAND 0x1f5
-				MX51_PAD_NANDF_D8__GPIO4_0 0x1f5
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX51_PAD_DI_GP3__FEC_TX_ER		0x80000000
-				MX51_PAD_DI2_PIN4__FEC_CRS		0x80000000
-				MX51_PAD_DI2_PIN2__FEC_MDC		0x80000000
-				MX51_PAD_DI2_PIN3__FEC_MDIO		0x80000000
-				MX51_PAD_DI2_DISP_CLK__FEC_RDATA1	0x80000000
-				MX51_PAD_DI_GP4__FEC_RDATA2		0x80000000
-				MX51_PAD_DISP2_DAT0__FEC_RDATA3		0x80000000
-				MX51_PAD_DISP2_DAT1__FEC_RX_ER		0x80000000
-				MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x80000000
-				MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x80000000
-				MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x80000000
-				MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x80000000
-				MX51_PAD_DISP2_DAT10__FEC_COL		0x80000000
-				MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x80000000
-				MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x80000000
-				MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x80000000
-				MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x80000000
-				MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x80000000
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX51_PAD_SD2_CMD__I2C1_SCL		0x400001ed
-				MX51_PAD_SD2_CLK__I2C1_SDA		0x400001ed
-			>;
-		};
-	};
-};
-
-&nfc {
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
deleted file mode 100644
index b6d931e96a8f..000000000000
--- a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
+++ /dev/null
@@ -1,274 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- */
-
-/dts-v1/;
-#include "imx51-eukrea-cpuimx51.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Eukrea CPUIMX51";
-	compatible = "eukrea,mbimxsd51","eukrea,cpuimx51", "fsl,imx51";
-
-	clocks {
-		clk24M: can_clock {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <24000000>;
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpiokeys_1>;
-
-		button-1 {
-			label = "BP1";
-			gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
-			linux,code = <256>;
-			wakeup-source;
-			linux,input-type = <1>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpioled>;
-
-		led1 {
-			label = "led1";
-			gpios = <&gpio3 30 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_can: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "CAN_RST";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
-			startup-delay-us = <20000>;
-			enable-active-high;
-		};
-	};
-
-	sound {
-		compatible = "eukrea,asoc-tlv320";
-		eukrea,model = "imx51-eukrea-tlv320aic23";
-		ssi-controller = <&ssi2>;
-		fsl,mux-int-port = <2>;
-		fsl,mux-ext-port = <3>;
-	};
-
-	usbphy1: usbphy1 {
-		compatible = "usb-nop-xceiv";
-		clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
-		clock-names = "main_clk";
-		clock-frequency = <19200000>;
-		#phy-cells = <0>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1 &pinctrl_esdhc1_cd>;
-	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	can0: can@0 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_can>;
-		compatible = "microchip,mcp2515";
-		reg = <0>;
-		clocks = <&clk24M>;
-		spi-max-frequency = <10000000>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
-		vdd-supply = <&reg_can>;
-	};
-};
-
-&i2c1 {
-	tlv320aic23: codec@1a {
-		compatible = "ti,tlv320aic23";
-		reg = <0x1a>;
-	};
-};
-
-&iomuxc {
-	imx51-eukrea {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX51_PAD_AUD3_BB_TXD__AUD3_TXD		0x80000000
-				MX51_PAD_AUD3_BB_RXD__AUD3_RXD		0x80000000
-				MX51_PAD_AUD3_BB_CK__AUD3_TXC		0x80000000
-				MX51_PAD_AUD3_BB_FS__AUD3_TXFS		0x80000000
-			>;
-		};
-
-
-		pinctrl_can: cangrp {
-			fsl,pins = <
-				MX51_PAD_CSI2_PIXCLK__GPIO4_15		0x80000000	/* nReset */
-				MX51_PAD_GPIO1_1__GPIO1_1		0x80000000	/* IRQ */
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
-				MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
-				MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
-				MX51_PAD_CSPI1_SS0__GPIO4_24		0x80000000 	/* CS0 */
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
-				MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
-				MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
-				MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
-				MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
-				MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
-				MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX51_PAD_UART3_RXD__UART3_RXD		0x1c5
-				MX51_PAD_UART3_TXD__UART3_TXD		0x1c5
-			>;
-		};
-
-		pinctrl_uart3_rtscts: uart3rtsctsgrp {
-			fsl,pins = <
-				MX51_PAD_KEY_COL4__UART3_RTS		0x1c5
-				MX51_PAD_KEY_COL5__UART3_CTS		0x1c5
-			>;
-		};
-
-		pinctrl_backlight_1: backlightgrp-1 {
-			fsl,pins = <
-				MX51_PAD_DI1_D1_CS__GPIO3_4 0x1f5
-			>;
-		};
-
-		pinctrl_esdhc1_cd: esdhc1_cd {
-			fsl,pins = <
-				MX51_PAD_GPIO1_0__GPIO1_0 0xd5
-			>;
-		};
-
-		pinctrl_gpiokeys_1: gpiokeysgrp-1 {
-			fsl,pins = <
-				MX51_PAD_NANDF_D9__GPIO3_31 0x1f5
-			>;
-		};
-
-		pinctrl_gpioled: gpioledgrp-1 {
-			fsl,pins = <
-				MX51_PAD_NANDF_D10__GPIO3_30 0x80000000
-			>;
-		};
-
-		pinctrl_reg_lcd_3v3: reg_lcd_3v3 {
-			fsl,pins = <
-				MX51_PAD_CSI1_D9__GPIO3_13 0x1f5
-			>;
-		};
-
-		pinctrl_usbh1: usbh1grp {
-			fsl,pins = <
-				MX51_PAD_USBH1_CLK__USBH1_CLK     0x1e5
-				MX51_PAD_USBH1_DIR__USBH1_DIR     0x1e5
-				MX51_PAD_USBH1_NXT__USBH1_NXT     0x1e5
-				MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x1e5
-				MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x1e5
-				MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x1e5
-				MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x1e5
-				MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x1e5
-				MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x1e5
-				MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x1e5
-				MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x1e5
-				MX51_PAD_USBH1_STP__USBH1_STP     0x1e5
-			>;
-		};
-
-		pinctrl_usbh1_vbus: usbh1-vbusgrp {
-			fsl,pins = <
-				MX51_PAD_EIM_CS3__GPIO2_28 0x1f5
-			>;
-		};
-	};
-};
-
-&ssi2 {
-	codec-handle = <&tlv320aic23>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3 &pinctrl_uart3_rtscts>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbh1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh1>;
-	fsl,usbphy = <&usbphy1>;
-	dr_mode = "host";
-	phy_type = "ulpi";
-	status = "okay";
-};
-
-&usbotg {
-	dr_mode = "otg";
-	phy_type = "utmi_wide";
-	status = "okay";
-};
-
-&usbphy0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh1_vbus>;
-	reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
-};
diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts
deleted file mode 100644
index 6208fbb2e741..000000000000
--- a/arch/arm/boot/dts/imx53-ard.dts
+++ /dev/null
@@ -1,179 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- */
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include "imx53.dtsi"
-
-/ {
-	model = "Freescale i.MX53 Automotive Reference Design Board";
-	compatible = "fsl,imx53-ard", "fsl,imx53";
-
-	memory@70000000 {
-		device_type = "memory";
-		reg = <0x70000000 0x40000000>;
-	};
-
-	eim-cs1@f4000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,eim-bus", "simple-bus";
-		reg = <0xf4000000 0x3ff0000>;
-		ranges;
-
-		ethernet@f4000000 {
-			compatible = "smsc,lan9220", "smsc,lan9115";
-			reg = <0xf4000000 0x2000000>;
-			phy-mode = "mii";
-			interrupt-parent = <&gpio2>;
-			interrupts = <31 0x8>;
-			reg-io-width = <4>;
-			/*
-			 * VDD33A and VDDVARIO of LAN9220 are supplied by
-			 * SW4_3V3 of LTC3589.  Before the regulator driver
-			 * for this PMIC is available, we use a fixed dummy
-			 * 3V3 regulator to get LAN9220 driver probing work.
-			 */
-			vdd33a-supply = <&reg_3p3v>;
-			vddvario-supply = <&reg_3p3v>;
-			smsc,irq-push-pull;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		home {
-			label = "Home";
-			gpios = <&gpio5 10 0>;
-			linux,code = <KEY_HOME>;
-			wakeup-source;
-		};
-
-		back {
-			label = "Back";
-			gpios = <&gpio5 11 0>;
-			linux,code = <KEY_BACK>;
-			wakeup-source;
-		};
-
-		program {
-			label = "Program";
-			gpios = <&gpio5 12 0>;
-			linux,code = <KEY_PROGRAM >;
-			wakeup-source;
-		};
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio5 13 0>;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio4 0 0>;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-	};
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx53-ard {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_1__GPIO1_1             0x80000000
-				MX53_PAD_GPIO_9__GPIO1_9             0x80000000
-				MX53_PAD_EIM_EB3__GPIO2_31           0x80000000
-				MX53_PAD_GPIO_10__GPIO4_0            0x80000000
-				MX53_PAD_DISP0_DAT16__GPIO5_10	     0x80000000
-				MX53_PAD_DISP0_DAT17__GPIO5_11       0x80000000
-				MX53_PAD_DISP0_DAT18__GPIO5_12       0x80000000
-				MX53_PAD_DISP0_DAT19__GPIO5_13       0x80000000
-				MX53_PAD_EIM_D16__EMI_WEIM_D_16      0x80000000
-				MX53_PAD_EIM_D17__EMI_WEIM_D_17      0x80000000
-				MX53_PAD_EIM_D18__EMI_WEIM_D_18      0x80000000
-				MX53_PAD_EIM_D19__EMI_WEIM_D_19      0x80000000
-				MX53_PAD_EIM_D20__EMI_WEIM_D_20      0x80000000
-				MX53_PAD_EIM_D21__EMI_WEIM_D_21      0x80000000
-				MX53_PAD_EIM_D22__EMI_WEIM_D_22      0x80000000
-				MX53_PAD_EIM_D23__EMI_WEIM_D_23      0x80000000
-				MX53_PAD_EIM_D24__EMI_WEIM_D_24      0x80000000
-				MX53_PAD_EIM_D25__EMI_WEIM_D_25      0x80000000
-				MX53_PAD_EIM_D26__EMI_WEIM_D_26      0x80000000
-				MX53_PAD_EIM_D27__EMI_WEIM_D_27      0x80000000
-				MX53_PAD_EIM_D28__EMI_WEIM_D_28      0x80000000
-				MX53_PAD_EIM_D29__EMI_WEIM_D_29      0x80000000
-				MX53_PAD_EIM_D30__EMI_WEIM_D_30      0x80000000
-				MX53_PAD_EIM_D31__EMI_WEIM_D_31      0x80000000
-				MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 0x80000000
-				MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 0x80000000
-				MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 0x80000000
-				MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 0x80000000
-				MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 0x80000000
-				MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 0x80000000
-				MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 0x80000000
-				MX53_PAD_EIM_OE__EMI_WEIM_OE	     0x80000000
-				MX53_PAD_EIM_RW__EMI_WEIM_RW	     0x80000000
-				MX53_PAD_EIM_CS1__EMI_WEIM_CS_1	     0x80000000
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
-				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
-				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
-				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
-				MX53_PAD_PATA_DATA8__ESDHC1_DAT4	0x1d5
-				MX53_PAD_PATA_DATA9__ESDHC1_DAT5	0x1d5
-				MX53_PAD_PATA_DATA10__ESDHC1_DAT6	0x1d5
-				MX53_PAD_PATA_DATA11__ESDHC1_DAT7	0x1d5
-				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
-				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
-				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
-			>;
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-kp-ddc.dts b/arch/arm/boot/dts/imx53-kp-ddc.dts
deleted file mode 100644
index 0e7f071fd10e..000000000000
--- a/arch/arm/boot/dts/imx53-kp-ddc.dts
+++ /dev/null
@@ -1,146 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2018
- * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
- */
-
-/dts-v1/;
-#include "imx53-kp.dtsi"
-
-/ {
-	model = "K+P imx53 DDC";
-	compatible = "kiebackpeter,imx53-ddc", "fsl,imx53";
-
-	backlight_lcd: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 50000>;
-		power-supply = <&reg_backlight>;
-		brightness-levels = <0 24 28 32 36
-				     40 44 48 52 56
-				     60 64 68 72 76
-				     80 84 88 92 96 100>;
-		default-brightness-level = <20>;
-	};
-
-	lcd_display: display {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_disp>;
-
-		port@0 {
-			reg = <0>;
-
-			display1_in: endpoint {
-				remote-endpoint = <&ipu_di1_disp1>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_display_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-	};
-
-	lcd_panel: lcd-panel {
-		compatible = "koe,tx14d24vm1bpa";
-		backlight = <&backlight_lcd>;
-		power-supply = <&reg_3v3>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-
-	reg_backlight: regulator-backlight {
-		compatible = "regulator-fixed";
-		regulator-name = "backlight-supply";
-		regulator-min-microvolt = <15000000>;
-		regulator-max-microvolt = <15000000>;
-		regulator-always-on;
-	};
-};
-
-&fec {
-	status = "okay";
-};
-
-&i2c3 {
-	adc@48 {
-		compatible = "ti,ads1015";
-		reg = <0x48>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		channel@4 {
-			reg = <4>;
-			ti,gain = <2>;
-			ti,datarate = <4>;
-		};
-
-		channel@6 {
-			reg = <6>;
-			ti,gain = <2>;
-			ti,datarate = <4>;
-		};
-	};
-
-	gpio-expander2@21 {
-		compatible = "nxp,pcf8574";
-		reg = <0x21>;
-		interrupts = <109>;
-		#gpio-cells = <2>;
-		gpio-controller;
-	};
-};
-
-&iomuxc {
-	imx53-kp-ddc {
-		pinctrl_disp: dispgrp {
-			fsl,pins = <
-				MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK      0x4
-				MX53_PAD_EIM_DA10__IPU_DI1_PIN15        0x4
-				MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0       0x4
-				MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1       0x4
-				MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2       0x4
-				MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3       0x4
-				MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4       0x4
-				MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5       0x4
-				MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6       0x4
-				MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7       0x4
-				MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8       0x4
-				MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9       0x4
-				MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10      0x4
-				MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11      0x4
-				MX53_PAD_EIM_A17__IPU_DISP1_DAT_12      0x4
-				MX53_PAD_EIM_A18__IPU_DISP1_DAT_13      0x4
-				MX53_PAD_EIM_A19__IPU_DISP1_DAT_14      0x4
-				MX53_PAD_EIM_A20__IPU_DISP1_DAT_15      0x4
-				MX53_PAD_EIM_A21__IPU_DISP1_DAT_16      0x4
-				MX53_PAD_EIM_A22__IPU_DISP1_DAT_17      0x4
-				MX53_PAD_EIM_A23__IPU_DISP1_DAT_18      0x4
-				MX53_PAD_EIM_A24__IPU_DISP1_DAT_19      0x4
-				MX53_PAD_EIM_D31__IPU_DISP1_DAT_20      0x4
-				MX53_PAD_EIM_D30__IPU_DISP1_DAT_21      0x4
-				MX53_PAD_EIM_D26__IPU_DISP1_DAT_22      0x4
-				MX53_PAD_EIM_D27__IPU_DISP1_DAT_23      0x4
-				MX53_PAD_GPIO_1__PWM2_PWMO 0x4
-			>;
-		};
-	};
-};
-
-&ipu_di1_disp1 {
-	remote-endpoint = <&display1_in>;
-};
-
-&pmic {
-	fsl,mc13xxx-uses-touch;
-};
diff --git a/arch/arm/boot/dts/imx53-kp.dtsi b/arch/arm/boot/dts/imx53-kp.dtsi
deleted file mode 100644
index 4508f34139a0..000000000000
--- a/arch/arm/boot/dts/imx53-kp.dtsi
+++ /dev/null
@@ -1,197 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2018
- * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
- */
-
-/dts-v1/;
-#include "imx53-tqma53.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	buzzer {
-		compatible = "pwm-beeper";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_buzzer>;
-		pwms = <&pwm1 0 500000>;
-	};
-
-	gpio-buttons {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpiobuttons>;
-
-		button-kalt {
-			label = "Kaltstart";
-			linux,code = <KEY_F6>;
-			gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
-		};
-
-		button-pwr {
-			label = "PowerFailInterrupt";
-			linux,code = <KEY_F7>;
-			gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_leds>;
-
-		led-bus {
-			label = "bus";
-			gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
-			default-state = "off";
-		};
-
-		led-error {
-			label = "error";
-			gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
-			default-state = "off";
-		};
-
-		led-flash {
-			label = "flash";
-			gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	reg_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-};
-
-&can1 {
-	status = "okay";
-};
-
-&can2 {
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-
-	gpio-expander1@22 {
-		compatible = "nxp,pcf8574";
-		reg = <0x22>;
-		interrupts = <109>;
-		#gpio-cells = <2>;
-		gpio-controller;
-	};
-
-	rtc@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_kp_common>;
-
-	imx53-kp-common {
-		pinctrl_buzzer: buzzergrp {
-			fsl,pins = <
-				MX53_PAD_SD1_DATA3__PWM1_PWMO 0x1e4
-			>;
-		};
-
-		pinctrl_gpiobuttons: gpiobuttonsgrp {
-			fsl,pins = <
-				MX53_PAD_EIM_RW__GPIO2_26 0x1e4
-				MX53_PAD_EIM_D22__GPIO3_22 0x1e4
-			>;
-		};
-
-		pinctrl_kp_common: kpcommongrp {
-			fsl,pins = <
-				MX53_PAD_EIM_CS0__GPIO2_23 0x1e4
-				MX53_PAD_GPIO_19__GPIO4_5  0x1e4
-				MX53_PAD_PATA_DATA6__GPIO2_6 0x1e4
-				MX53_PAD_PATA_DATA7__GPIO2_7 0xe0
-				MX53_PAD_CSI0_DAT14__GPIO6_0 0x1e4
-				MX53_PAD_CSI0_DAT16__GPIO6_2 0x1e4
-				MX53_PAD_CSI0_DAT18__GPIO6_4 0x1e4
-				MX53_PAD_EIM_D17__GPIO3_17 0x1e4
-				MX53_PAD_EIM_D18__GPIO3_18 0x1e4
-				MX53_PAD_EIM_D21__GPIO3_21 0x1e4
-				MX53_PAD_EIM_D29__GPIO3_29 0x1e4
-				MX53_PAD_EIM_DA11__GPIO3_11 0x1e4
-				MX53_PAD_EIM_DA13__GPIO3_13 0x1e4
-				MX53_PAD_EIM_DA14__GPIO3_14 0x1e4
-				MX53_PAD_SD1_DATA0__GPIO1_16 0x1e4
-				MX53_PAD_SD1_CMD__GPIO1_18 0x1e4
-				MX53_PAD_SD1_CLK__GPIO1_20 0x1e4
-			>;
-		};
-
-		pinctrl_leds: ledgrp {
-			fsl,pins = <
-				MX53_PAD_EIM_EB2__GPIO2_30 0x1d4
-				MX53_PAD_EIM_D28__GPIO3_28 0x1d4
-				MX53_PAD_EIM_WAIT__GPIO5_0 0x1d4
-			>;
-		};
-
-		pinctrl_uart4: uart4grp {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT12__UART4_TXD_MUX 0x1e4
-				MX53_PAD_CSI0_DAT13__UART4_RXD_MUX 0x1e4
-			>;
-		};
-	};
-};
-
-&pinctrl_uart1 {
-	fsl,pins = <
-		MX53_PAD_EIM_D23__GPIO3_23 0x1e4
-		MX53_PAD_EIM_EB3__GPIO2_31 0x1e4
-		MX53_PAD_EIM_D24__GPIO3_24 0x1e4
-		MX53_PAD_EIM_D25__GPIO3_25 0x1e4
-		MX53_PAD_EIM_D19__GPIO3_19 0x1e4
-		MX53_PAD_EIM_D20__GPIO3_20 0x1e4
-	>;
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-};
-
-&pwm2 {
-	#pwm-cells = <2>;
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbphy0 {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/imx53-m53.dtsi b/arch/arm/boot/dts/imx53-m53.dtsi
deleted file mode 100644
index fe5e0d308e99..000000000000
--- a/arch/arm/boot/dts/imx53-m53.dtsi
+++ /dev/null
@@ -1,132 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2014 Marek Vasut <marex@denx.de>
- */
-
-#include "imx53.dtsi"
-
-/ {
-	model = "Aries/DENX M53";
-	compatible = "aries,imx53-m53", "denx,imx53-m53", "fsl,imx53";
-
-	memory@70000000 {
-		device_type = "memory";
-		reg = <0x70000000 0x20000000>,
-		      <0xb0000000 0x20000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p2v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P2V";
-			regulator-min-microvolt = <3200000>;
-			regulator-max-microvolt = <3200000>;
-			regulator-always-on;
-		};
-
-		reg_backlight: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "lcd-supply";
-			regulator-min-microvolt = <3200000>;
-			regulator-max-microvolt = <3200000>;
-			regulator-always-on;
-		};
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	clock-frequency = <400000>;
-	status = "okay";
-
-	touchscreen@41 {
-		compatible = "st,stmpe610";
-		reg = <0x41>;
-		id = <0>;
-		blocks = <0x5>;
-		interrupts = <6 0x0>;
-		interrupt-parent = <&gpio7>;
-		irq-trigger = <0x1>;
-
-		stmpe_touchscreen {
-			compatible = "st,stmpe-ts";
-			st,sample-time = <4>;
-			st,mod-12b = <1>;
-			st,ref-sel = <0>;
-			st,adc-freq = <1>;
-			st,ave-ctrl = <3>;
-			st,touch-det-delay = <3>;
-			st,settling = <4>;
-			st,fraction-z = <7>;
-			st,i-drive = <1>;
-		};
-	};
-
-	eeprom: eeprom@50 {
-		compatible = "atmel,24c128";
-		reg = <0x50>;
-		pagesize = <32>;
-	};
-
-	rtc: rtc@68 {
-		compatible = "st,m41t62";
-		reg = <0x68>;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx53-m53evk {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK	0x80000000
-				MX53_PAD_EIM_EB3__GPIO2_31		0x80000000
-				MX53_PAD_PATA_DA_0__GPIO7_6		0x80000000
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D16__I2C2_SDA		0xc0000000
-				MX53_PAD_EIM_EB2__I2C2_SCL		0xc0000000
-			>;
-		};
-
-		pinctrl_nand: nandgrp {
-			fsl,pins = <
-				MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B	0x4
-				MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B	0x4
-				MX53_PAD_NANDF_CLE__EMI_NANDF_CLE	0x4
-				MX53_PAD_NANDF_ALE__EMI_NANDF_ALE	0x4
-				MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B	0xe0
-				MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0	0xe0
-				MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0	0x4
-				MX53_PAD_PATA_DATA0__EMI_NANDF_D_0	0xa4
-				MX53_PAD_PATA_DATA1__EMI_NANDF_D_1	0xa4
-				MX53_PAD_PATA_DATA2__EMI_NANDF_D_2	0xa4
-				MX53_PAD_PATA_DATA3__EMI_NANDF_D_3	0xa4
-				MX53_PAD_PATA_DATA4__EMI_NANDF_D_4	0xa4
-				MX53_PAD_PATA_DATA5__EMI_NANDF_D_5	0xa4
-				MX53_PAD_PATA_DATA6__EMI_NANDF_D_6	0xa4
-				MX53_PAD_PATA_DATA7__EMI_NANDF_D_7	0xa4
-			>;
-		};
-	};
-};
-
-&nfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nand>;
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts
deleted file mode 100644
index a1a6228d1aa6..000000000000
--- a/arch/arm/boot/dts/imx53-m53evk.dts
+++ /dev/null
@@ -1,371 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2013 Marek Vasut <marex@denx.de>
- */
-
-/dts-v1/;
-#include "imx53-m53.dtsi"
-
-/ {
-	model = "Aries/DENX M53EVK";
-	compatible = "aries,imx53-m53evk", "denx,imx53-m53evk", "fsl,imx53";
-
-	display1: disp1 {
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "bgr666";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu_disp1>;
-
-		display-timings {
-			800x480p60 {
-				native-mode;
-				clock-frequency = <31500000>;
-				hactive = <800>;
-				vactive = <480>;
-				hfront-porch = <40>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				vback-porch = <33>;
-				vfront-porch = <9>;
-				vsync-len = <3>;
-				vsync-active = <1>;
-			};
-		};
-
-		port {
-			display1_in: endpoint {
-				remote-endpoint = <&ipu_di1_disp1>;
-			};
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 3000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-		power-supply = <&reg_backlight>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pin_gpio>;
-
-		user1 {
-			label = "user1";
-			gpios = <&gpio2 8 0>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		user2 {
-			label = "user2";
-			gpios = <&gpio2 9 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usbh1_vbus: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 2 0>;
-		};
-
-		reg_usb_otg_vbus: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 4 0>;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx53-m53evk-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx53-m53evk-sgtl5000";
-		ssi-controller = <&ssi2>;
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"LINE_IN", "Line In Jack",
-			"Headphone Jack", "HP_OUT",
-			"Ext Spk", "LINE_OUT";
-		mux-int-port = <2>;
-		mux-ext-port = <4>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can2>;
-	status = "okay";
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "rmii";
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	sgtl5000: codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		#sound-dai-cells = <0>;
-		VDDA-supply = <&reg_3p2v>;
-		VDDIO-supply = <&reg_3p2v>;
-		clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
-	};
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx53-m53evk {
-		pinctrl_usb: usbgrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_2__GPIO1_2		0x80000000
-				MX53_PAD_GPIO_3__USBOH3_USBH1_OC	0x80000000
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_4__GPIO1_4		0x000b0
-			>;
-		};
-
-		led_pin_gpio: led_gpio {
-			fsl,pins = <
-				MX53_PAD_PATA_DATA8__GPIO2_8		0x80000000
-				MX53_PAD_PATA_DATA9__GPIO2_9		0x80000000
-			>;
-		};
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC	0x80000000
-				MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD	0x80000000
-				MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS	0x80000000
-				MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD	0x80000000
-			>;
-		};
-
-		pinctrl_can1: can1grp {
-			fsl,pins = <
-				MX53_PAD_GPIO_7__CAN1_TXCAN		0x80000000
-				MX53_PAD_GPIO_8__CAN1_RXCAN		0x80000000
-			>;
-		};
-
-		pinctrl_can2: can2grp {
-			fsl,pins = <
-				MX53_PAD_KEY_COL4__CAN2_TXCAN		0x80000000
-				MX53_PAD_KEY_ROW4__CAN2_RXCAN		0x80000000
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
-				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
-				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
-				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
-				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
-				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
-				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
-				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
-				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
-				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
-				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
-				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
-				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
-				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
-				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D21__I2C1_SCL		0xc0000000
-				MX53_PAD_EIM_D28__I2C1_SDA		0xc0000000
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX53_PAD_GPIO_6__I2C3_SDA		0xc0000000
-				MX53_PAD_GPIO_5__I2C3_SCL		0xc0000000
-			>;
-		};
-
-		pinctrl_ipu_disp1: ipudisp1grp {
-			fsl,pins = <
-				MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0	0x5
-				MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1	0x5
-				MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2	0x5
-				MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3	0x5
-				MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4	0x5
-				MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5	0x5
-				MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6	0x5
-				MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7	0x5
-				MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8	0x5
-				MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9	0x5
-				MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10	0x5
-				MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11	0x5
-				MX53_PAD_EIM_A17__IPU_DISP1_DAT_12	0x5
-				MX53_PAD_EIM_A18__IPU_DISP1_DAT_13	0x5
-				MX53_PAD_EIM_A19__IPU_DISP1_DAT_14	0x5
-				MX53_PAD_EIM_A20__IPU_DISP1_DAT_15	0x5
-				MX53_PAD_EIM_A21__IPU_DISP1_DAT_16	0x5
-				MX53_PAD_EIM_A22__IPU_DISP1_DAT_17	0x5
-				MX53_PAD_EIM_A23__IPU_DISP1_DAT_18	0x5
-				MX53_PAD_EIM_A24__IPU_DISP1_DAT_19	0x5
-				MX53_PAD_EIM_D31__IPU_DISP1_DAT_20	0x5
-				MX53_PAD_EIM_D30__IPU_DISP1_DAT_21	0x5
-				MX53_PAD_EIM_D26__IPU_DISP1_DAT_22	0x5
-				MX53_PAD_EIM_D27__IPU_DISP1_DAT_23	0x5
-				MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK	0x5
-				MX53_PAD_EIM_DA13__IPU_DI1_D0_CS	0x5
-				MX53_PAD_EIM_DA14__IPU_DI1_D1_CS	0x5
-				MX53_PAD_EIM_DA15__IPU_DI1_PIN1		0x5
-				MX53_PAD_EIM_DA11__IPU_DI1_PIN2		0x5
-				MX53_PAD_EIM_DA12__IPU_DI1_PIN3		0x5
-				MX53_PAD_EIM_A25__IPU_DI1_PIN12		0x5
-				MX53_PAD_EIM_DA10__IPU_DI1_PIN15	0x5
-			>;
-		};
-
-		pinctrl_pwm1: pwm1grp {
-			fsl,pins = <
-				MX53_PAD_DISP0_DAT8__PWM1_PWMO		0x5
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
-				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
-				MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
-				MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
-				MX53_PAD_PATA_DA_1__UART3_CTS		0x1e4
-				MX53_PAD_PATA_DA_2__UART3_RTS		0x1e4
-			>;
-		};
-	};
-};
-
-&ipu_di1_disp1 {
-	remote-endpoint = <&display1_in>;
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&ssi2 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&usbh1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb>;
-	vbus-supply = <&reg_usbh1_vbus>;
-	phy_type = "utmi";
-	status = "okay";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	dr_mode = "otg";
-	vbus-supply = <&reg_usb_otg_vbus>;
-	disable-over-current;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-m53menlo.dts b/arch/arm/boot/dts/imx53-m53menlo.dts
deleted file mode 100644
index 4f88e96d81dd..000000000000
--- a/arch/arm/boot/dts/imx53-m53menlo.dts
+++ /dev/null
@@ -1,492 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2019 Marek Vasut <marex@denx.de>
- */
-
-/dts-v1/;
-#include "imx53-m53.dtsi"
-
-/ {
-	model = "MENLO M53 EMBEDDED DEVICE";
-	compatible = "menlo,m53menlo", "fsl,imx53";
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&pinctrl_power_button>;
-		pinctrl-names = "default";
-
-		power-button {
-			label = "Power button";
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-		};
-	};
-
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&pinctrl_power_out>;
-		pinctrl-names = "default";
-		gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_led>;
-
-		user1 {
-			label = "TestLed601";
-			gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc0";
-		};
-
-		user2 {
-			label = "TestLed602";
-			gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		eth {
-			label = "EthLedYe";
-			gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "netdev";
-		};
-	};
-
-	panel {
-		compatible = "edt,etm0700g0dh6";
-		pinctrl-0 = <&pinctrl_display_gpio>;
-		pinctrl-names = "default";
-		enable-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-
-	beeper {
-		compatible = "gpio-beeper";
-		pinctrl-0 = <&pinctrl_beeper>;
-		gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;
-	};
-
-	reg_usbh1_vbus: regulator-usbh1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 2 0>;
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can2>;
-	status = "okay";
-};
-
-&clks {
-	assigned-clocks = <&clks IMX5_CLK_CKO1_SEL>,
-			  <&clks IMX5_CLK_CKO1_PODF>,
-			  <&clks IMX5_CLK_CKO1>;
-	assigned-clock-parents = <&clks IMX5_CLK_AHB>;
-	assigned-clock-rates = <133333334>, <33333334>, <33333334>;
-};
-
-&ecspi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>, <&gpio2 27 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	spidev@0 {
-		compatible = "menlo,m53cpld";
-		spi-max-frequency = <25000000>;
-		reg = <0>;
-	};
-
-	spidev@1 {
-		compatible = "menlo,m53cpld";
-		spi-max-frequency = <25000000>;
-		reg = <1>;
-	};
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio7 7 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&gpio1 {
-	gpio-line-names =
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "";
-};
-
-&gpio2 {
-	gpio-line-names =
-		"", "", "", "",
-		"", "", "", "",
-		"TestPin_SV2_3", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "";
-};
-
-&gpio3 {
-	gpio-line-names =
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"CPLD_JTAG_TDI", "CPLD_JTAG_TMS", "", "",
-		"", "CPLD_JTAG_TDO", "", "";
-};
-
-&gpio5 {
-	gpio-line-names =
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "CPLD_JTAG_TCK", "KBD_intK",
-		"CPLD_int", "CPLD_JTAG_internal", "CPLD_D[0]", "CPLD_D[1]",
-		"CPLD_D[2]", "CPLD_D[3]", "CPLD_D[4]", "CPLD_D[5]",
-		"CPLD_D[6]", "CPLD_D[7]", "DISP_reset", "KBD_intI";
-};
-
-&gpio6 {
-	gpio-line-names =
-		"", "", "", "",
-		"CPLD_reset", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "";
-};
-
-&gpio7 {
-	gpio-line-names =
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "USB-OTG_OverCurrent", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	touchscreen@38 {
-		compatible = "edt,edt-ft5x06";
-		reg = <0x38>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_edt_ft5x06>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
-		wake-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-		pagesize = <32>;
-	};
-
-	dac@60 {
-		compatible = "microchip,mcp4725";
-		reg = <0x60>;
-	};
-};
-
-&i2c2 {
-	touchscreen@41 {
-		status = "disabled";
-	};
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx53-m53evk {
-		hoggrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_19__CCM_CLKO		0x1e4
-				MX53_PAD_CSI0_DATA_EN__GPIO5_20		0x1e4
-				MX53_PAD_CSI0_DAT4__GPIO5_22		0x1e4
-				MX53_PAD_CSI0_DAT5__GPIO5_23		0x1c4
-				MX53_PAD_CSI0_DAT6__GPIO5_24		0x1e4
-				MX53_PAD_CSI0_DAT7__GPIO5_25		0x1e4
-				MX53_PAD_CSI0_DAT8__GPIO5_26		0x1e4
-				MX53_PAD_CSI0_DAT9__GPIO5_27		0x1c4
-				MX53_PAD_CSI0_DAT10__GPIO5_28		0x1e4
-				MX53_PAD_CSI0_DAT11__GPIO5_29		0x1e4
-				MX53_PAD_PATA_DATA11__GPIO2_11		0x1e4
-				MX53_PAD_EIM_D24__GPIO3_24		0x1e4
-				MX53_PAD_EIM_D25__GPIO3_25		0x1e4
-				MX53_PAD_EIM_D29__GPIO3_29		0x1e4
-				MX53_PAD_CSI0_PIXCLK__GPIO5_18		0x1e4
-				MX53_PAD_CSI0_VSYNC__GPIO5_21		0x1e4
-				MX53_PAD_CSI0_DAT18__GPIO6_4		0x1c4
-				MX53_PAD_PATA_DATA8__GPIO2_8		0x1e4
-			>;
-		};
-
-		pinctrl_led: ledgrp {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT15__GPIO6_1		0x1c4
-				MX53_PAD_CSI0_DAT16__GPIO6_2		0x1c4
-			>;
-		};
-
-		pinctrl_beeper: beepergrp {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT17__GPIO6_3		0x1c4
-			>;
-		};
-
-		pinctrl_can1: can1grp {
-			fsl,pins = <
-				MX53_PAD_GPIO_7__CAN1_TXCAN		0x1c4
-				MX53_PAD_GPIO_8__CAN1_RXCAN		0x1c4
-			>;
-		};
-
-		pinctrl_can2: can2grp {
-			fsl,pins = <
-				MX53_PAD_KEY_COL4__CAN2_TXCAN		0x1e4
-				MX53_PAD_KEY_ROW4__CAN2_RXCAN		0x1c4
-			>;
-		};
-
-		pinctrl_display_gpio: display-gpiogrp {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT12__GPIO5_30		0x1c4 /* Reset */
-				MX53_PAD_CSI0_MCLK__GPIO5_19		0x1e4 /* Int-K */
-				MX53_PAD_CSI0_DAT13__GPIO5_31		0x1c4 /* Int-I */
-
-				MX53_PAD_CSI0_DAT14__GPIO6_0		0x1c4 /* Power down */
-			>;
-		};
-
-		pinctrl_edt_ft5x06: edt-ft5x06grp {
-			fsl,pins = <
-				MX53_PAD_PATA_DATA9__GPIO2_9		0x1e4 /* Reset */
-				MX53_PAD_CSI0_DAT19__GPIO6_5		0x1c4 /* Interrupt */
-				MX53_PAD_PATA_DATA10__GPIO2_10		0x1e4 /* Wake */
-			>;
-		};
-
-		pinctrl_ecspi2: ecspi2grp {
-			fsl,pins = <
-				MX53_PAD_EIM_CS0__ECSPI2_SCLK		0xe4
-				MX53_PAD_EIM_OE__ECSPI2_MISO		0xe4
-				MX53_PAD_EIM_CS1__ECSPI2_MOSI		0xe4
-				MX53_PAD_EIM_RW__GPIO2_26		0xe4
-				MX53_PAD_EIM_LBA__GPIO2_27		0xe4
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1e4
-				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1e4
-				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1e4
-				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1e4
-				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1e4
-				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1e4
-				MX53_PAD_GPIO_1__GPIO1_1		0x1c4
-				MX53_PAD_GPIO_9__GPIO1_9		0x1e4
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX53_PAD_FEC_MDC__FEC_MDC		0x1e4
-				MX53_PAD_FEC_MDIO__FEC_MDIO		0x1e4
-				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x1e4
-				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x1e4
-				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x1e4
-				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x1e4
-				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x1e4
-				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x1c4
-				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x1e4
-				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x1e4
-				MX53_PAD_PATA_DA_1__GPIO7_7		0x1e4
-				MX53_PAD_EIM_EB3__GPIO2_31		0x1e4
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D21__I2C1_SCL		0x400001e4
-				MX53_PAD_EIM_D28__I2C1_SDA		0x400001e4
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX53_PAD_GPIO_6__I2C3_SDA		0x400001e4
-				MX53_PAD_GPIO_5__I2C3_SCL		0x400001e4
-			>;
-		};
-
-		pinctrl_lvds0: lvds0grp {
-			/* LVDS pins only have pin mux configuration */
-			fsl,pins = <
-				MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK	0x80000000
-				MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0	0x80000000
-				MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1	0x80000000
-				MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2	0x80000000
-				MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3	0x80000000
-			>;
-		};
-
-		pinctrl_power_button: powerbutgrp {
-			fsl,pins = <
-				MX53_PAD_SD2_DATA0__GPIO1_15		0x1e4
-			>;
-		};
-
-		pinctrl_power_out: poweroutgrp {
-			fsl,pins = <
-				MX53_PAD_SD2_DATA2__GPIO1_13		0x1e4
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
-				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
-				MX53_PAD_PATA_IORDY__UART1_RTS		0x1e4
-				MX53_PAD_PATA_RESET_B__UART1_CTS	0x1e4
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
-				MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
-				MX53_PAD_PATA_DIOR__UART2_RTS		0x1e4
-				MX53_PAD_PATA_INTRQ__UART2_CTS		0x1e4
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
-				MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
-				MX53_PAD_PATA_DA_2__UART3_RTS		0x1e4
-			>;
-		};
-
-		pinctrl_usb: usbgrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_2__GPIO1_2		0x1c4
-				MX53_PAD_GPIO_3__USBOH3_USBH1_OC	0x1c4
-				MX53_PAD_GPIO_4__GPIO1_4		0x1c4
-				MX53_PAD_GPIO_18__GPIO7_13		0x1c4
-			>;
-		};
-	};
-};
-
-&ldb {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lvds0>;
-	status = "okay";
-
-	lvds0: lvds-channel@0 {
-		reg = <0>;
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		port@2 {
-			reg = <2>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	linux,rs485-enabled-at-boot-time;
-	status = "okay";
-};
-
-&usbh1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb>;
-	vbus-supply = <&reg_usbh1_vbus>;
-	phy_type = "utmi";
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbotg {
-	dr_mode = "peripheral";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts
deleted file mode 100644
index 09eee0dd44c1..000000000000
--- a/arch/arm/boot/dts/imx53-mba53.dts
+++ /dev/null
@@ -1,249 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix
- */
-
-/dts-v1/;
-#include "imx53-tqma53.dtsi"
-
-/ {
-	model = "TQ MBa53 starter kit";
-	compatible = "tq,mba53", "tq,tqma53", "fsl,imx53";
-
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 50000>;
-		brightness-levels = <0 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 84 88 92 96 100>;
-		default-brightness-level = <10>;
-		enable-gpios = <&gpio7 7 0>;
-		power-supply = <&reg_backlight>;
-	};
-
-	disp1: disp1 {
-		compatible = "fsl,imx-parallel-display";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_disp1_1>;
-		interface-pix-fmt = "rgb24";
-		status = "disabled";
-
-		port {
-			display1_in: endpoint {
-				remote-endpoint = <&ipu_di1_disp1>;
-			};
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_backlight: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "lcd-supply";
-			gpio = <&gpio2 5 0>;
-			startup-delay-us = <5000>;
-		};
-
-		reg_3p2v: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "3P2V";
-			regulator-min-microvolt = <3200000>;
-			regulator-max-microvolt = <3200000>;
-			regulator-always-on;
-		};
-	};
-
-	sound {
-		compatible = "tq,imx53-mba53-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx53-mba53-sgtl5000";
-		ssi-controller = <&ssi2>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <2>;
-		mux-ext-port = <5>;
-	};
-};
-
-&ldb {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lvds1_1>;
-	status = "disabled";
-};
-
-&iomuxc {
-	lvds1 {
-		pinctrl_lvds1_1: lvds1-grp1 {
-			fsl,pins = <
-				MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000
-				MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000
-				MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000
-				MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000
-				MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000
-			>;
-		};
-
-		pinctrl_lvds1_2: lvds1-grp2 {
-			fsl,pins = <
-				MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x80000000
-				MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x80000000
-				MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x80000000
-				MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x80000000
-				MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x80000000
-			>;
-		};
-	};
-
-	disp1 {
-		pinctrl_disp1_1: disp1-grp1 {
-			fsl,pins = <
-				MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK 0x80000000 /* DISP1_CLK */
-				MX53_PAD_EIM_DA10__IPU_DI1_PIN15   0x80000000 /* DISP1_DRDY */
-				MX53_PAD_EIM_D23__IPU_DI1_PIN2     0x80000000 /* DISP1_HSYNC */
-				MX53_PAD_EIM_EB3__IPU_DI1_PIN3     0x80000000 /* DISP1_VSYNC */
-				MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x80000000
-				MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x80000000
-				MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x80000000
-				MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x80000000
-				MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x80000000
-				MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x80000000
-				MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x80000000
-				MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x80000000
-				MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x80000000
-				MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x80000000
-				MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x80000000
-				MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x80000000
-				MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x80000000
-				MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x80000000
-				MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9  0x80000000
-				MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8  0x80000000
-				MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7  0x80000000
-				MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6  0x80000000
-				MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5  0x80000000
-				MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4  0x80000000
-				MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3  0x80000000
-				MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2  0x80000000
-				MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1  0x80000000
-				MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0  0x80000000
-			>;
-		};
-	};
-
-	tve {
-		pinctrl_vga_sync_1: vgasync-grp1 {
-			fsl,pins = <
-				/* VGA_VSYNC, HSYNC with max drive strength */
-				MX53_PAD_EIM_CS1__IPU_DI1_PIN6	   0xe6
-				MX53_PAD_EIM_DA15__IPU_DI1_PIN4	   0xe6
-			>;
-		};
-	};
-};
-
-&ipu_di1_disp1 {
-	remote-endpoint = <&display1_in>;
-};
-
-&cspi {
-	status = "okay";
-};
-
-&audmux {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-};
-
-&i2c2 {
-	codec: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
-		VDDA-supply = <&reg_3p2v>;
-		VDDIO-supply = <&reg_3p2v>;
-	};
-
-	expander: pca9554@20 {
-		compatible = "pca9554";
-		reg = <0x20>;
-		interrupts = <109>;
-		#gpio-cells = <2>;
-		gpio-controller;
-	};
-
-	sensor2: lm75@49 {
-		compatible = "lm75";
-		reg = <0x49>;
-	};
-};
-
-&fec {
-	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&esdhc2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&ecspi1 {
-	status = "okay";
-};
-
-&usbotg {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&ssi2 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&can1 {
-	status = "okay";
-};
-
-&can2 {
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-};
-
-&tve {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_vga_sync_1>;
-	ddc-i2c-bus = <&i2c3>;
-	fsl,tve-mode = "vga";
-	fsl,hsync-pin = <4>;
-	fsl,vsync-pin = <6>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi
deleted file mode 100644
index fe4244044a0f..000000000000
--- a/arch/arm/boot/dts/imx53-qsb-common.dtsi
+++ /dev/null
@@ -1,387 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2011 Freescale Semiconductor, Inc.
-// Copyright 2011 Linaro Ltd.
-
-#include "imx53.dtsi"
-
-/ {
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	memory@70000000 {
-		device_type = "memory";
-		reg = <0x70000000 0x20000000>,
-		      <0xb0000000 0x20000000>;
-	};
-
-	display0: disp0 {
-		compatible = "fsl,imx-parallel-display";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu_disp0>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-
-		port@0 {
-			reg = <0>;
-
-			display0_in: endpoint {
-				remote-endpoint = <&ipu_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			display_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power {
-			label = "Power Button";
-			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-		};
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-			wakeup-source;
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pin_gpio7_7>;
-
-		user {
-			label = "Heartbeat";
-			gpios = <&gpio7 7 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	panel {
-		compatible = "sii,43wvf1g";
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&display_out>;
-			};
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p2v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P2V";
-			regulator-min-microvolt = <3200000>;
-			regulator-max-microvolt = <3200000>;
-			regulator-always-on;
-		};
-
-		reg_usb_vbus: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "usb_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio7 8 0>;
-			enable-active-high;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx53-qsb-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx53-qsb-sgtl5000";
-		ssi-controller = <&ssi2>;
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <2>;
-		mux-ext-port = <5>;
-	};
-};
-
-&cpu0 {
-	/* CPU rated to 1GHz, not 1.2GHz as per the default settings */
-	operating-points = <
-		/* kHz   uV */
-		166666  850000
-		400000  900000
-		800000  1050000
-		1000000 1200000
-	>;
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&ipu_di0_disp0 {
-	remote-endpoint = <&display0_in>;
-};
-
-&ssi2 {
-	status = "okay";
-};
-
-&esdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc3>;
-	cd-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
-	bus-width = <8>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx53-qsb {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_8__GPIO1_8          0x80000000
-				MX53_PAD_PATA_DATA14__GPIO2_14    0x80000000
-				MX53_PAD_PATA_DATA15__GPIO2_15    0x80000000
-				MX53_PAD_EIM_DA11__GPIO3_11       0x80000000
-				MX53_PAD_EIM_DA12__GPIO3_12       0x80000000
-				MX53_PAD_PATA_DA_0__GPIO7_6       0x80000000
-				MX53_PAD_PATA_DA_2__GPIO7_8	  0x80000000
-				MX53_PAD_GPIO_16__GPIO7_11        0x80000000
-			>;
-		};
-
-		led_pin_gpio7_7: led_gpio7_7 {
-			fsl,pins = <
-				MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000
-			>;
-		};
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	0x80000000
-				MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
-				MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
-				MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
-			>;
-		};
-
-		pinctrl_codec: codecgrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK	0x1c4
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
-				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
-				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
-				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
-				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
-				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
-				MX53_PAD_EIM_DA13__GPIO3_13		0xe4
-			>;
-		};
-
-		pinctrl_esdhc3: esdhc3grp {
-			fsl,pins = <
-				MX53_PAD_PATA_DATA8__ESDHC3_DAT0	0x1d5
-				MX53_PAD_PATA_DATA9__ESDHC3_DAT1	0x1d5
-				MX53_PAD_PATA_DATA10__ESDHC3_DAT2	0x1d5
-				MX53_PAD_PATA_DATA11__ESDHC3_DAT3	0x1d5
-				MX53_PAD_PATA_DATA0__ESDHC3_DAT4	0x1d5
-				MX53_PAD_PATA_DATA1__ESDHC3_DAT5	0x1d5
-				MX53_PAD_PATA_DATA2__ESDHC3_DAT6	0x1d5
-				MX53_PAD_PATA_DATA3__ESDHC3_DAT7	0x1d5
-				MX53_PAD_PATA_RESET_B__ESDHC3_CMD	0x1d5
-				MX53_PAD_PATA_IORDY__ESDHC3_CLK		0x1d5
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX53_PAD_FEC_MDC__FEC_MDC		0x4
-				MX53_PAD_FEC_MDIO__FEC_MDIO		0x1fc
-				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x180
-				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x180
-				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x180
-				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x180
-				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x180
-				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x4
-				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x4
-				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x4
-			>;
-		};
-
-		/* open drain */
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT8__I2C1_SDA		0x400001ec
-				MX53_PAD_CSI0_DAT9__I2C1_SCL		0x400001ec
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX53_PAD_KEY_ROW3__I2C2_SDA		0xc0000000
-				MX53_PAD_KEY_COL3__I2C2_SCL		0xc0000000
-			>;
-		};
-
-		pinctrl_ipu_disp0: ipudisp0grp {
-			fsl,pins = <
-				MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK	0x5
-				MX53_PAD_DI0_PIN15__IPU_DI0_PIN15	0x5
-				MX53_PAD_DI0_PIN2__IPU_DI0_PIN2		0x5
-				MX53_PAD_DI0_PIN3__IPU_DI0_PIN3		0x5
-				MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0	0x5
-				MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1	0x5
-				MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2	0x5
-				MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3	0x5
-				MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4	0x5
-				MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5	0x5
-				MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6	0x5
-				MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7	0x5
-				MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8	0x5
-				MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9	0x5
-				MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10	0x5
-				MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11	0x5
-				MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12	0x5
-				MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13	0x5
-				MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14	0x5
-				MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15	0x5
-				MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16	0x5
-				MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17	0x5
-				MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18	0x5
-				MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19	0x5
-				MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20	0x5
-				MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21	0x5
-				MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22	0x5
-				MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23	0x5
-			>;
-		};
-
-		pinctrl_vga_sync: vgasync-grp {
-			fsl,pins = <
-				/* VGA_HSYNC, VSYNC with max drive strength */
-				MX53_PAD_EIM_OE__IPU_DI1_PIN7 0xe6
-				MX53_PAD_EIM_RW__IPU_DI1_PIN8 0xe6
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT10__UART1_TXD_MUX	0x1e4
-				MX53_PAD_CSI0_DAT11__UART1_RXD_MUX	0x1e4
-			>;
-		};
-	};
-};
-
-&tve {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_vga_sync>;
-	ddc-i2c-bus = <&i2c2>;
-	fsl,tve-mode = "vga";
-	fsl,hsync-pin = <7>;	/* IPU DI1 PIN7 via EIM_OE */
-	fsl,vsync-pin = <8>;	/* IPU DI1 PIN8 via EIM_RW */
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	sgtl5000: codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_codec>;
-		#sound-dai-cells = <0>;
-		VDDA-supply = <&reg_3p2v>;
-		VDDIO-supply = <&reg_3p2v>;
-		clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	accelerometer: mma8450@1c {
-		compatible = "fsl,mma8450";
-		reg = <0x1c>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&vpu {
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_vbus>;
-	phy_type = "utmi";
-	status = "okay";
-};
-
-&usbotg {
-	dr_mode = "peripheral";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts
deleted file mode 100644
index 9be44e807188..000000000000
--- a/arch/arm/boot/dts/imx53-smd.dts
+++ /dev/null
@@ -1,346 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2011 Freescale Semiconductor, Inc.
-// Copyright 2011 Linaro Ltd.
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include "imx53.dtsi"
-
-/ {
-	model = "Freescale i.MX53 Smart Mobile Reference Design Board";
-	compatible = "fsl,imx53-smd", "fsl,imx53";
-
-	memory@70000000 {
-		device_type = "memory";
-		reg = <0x70000000 0x40000000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio2 14 0>;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio2 15 0>;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-	};
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&esdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc2>;
-	non-removable;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio3 19 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	zigbee: mc1323@0 {
-		compatible = "fsl,mc1323";
-		spi-max-frequency = <8000000>;
-		reg = <0>;
-	};
-
-	flash: m25p32@1 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "st,m25p32", "st,m25p", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <1>;
-
-		partition@0 {
-			label = "U-Boot";
-			reg = <0x0 0x40000>;
-			read-only;
-		};
-
-		partition@40000 {
-			label = "Kernel";
-			reg = <0x40000 0x3c0000>;
-		};
-	};
-};
-
-&esdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc3>;
-	non-removable;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx53-smd {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000
-				MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000
-				MX53_PAD_EIM_EB2__GPIO2_30     0x80000000
-				MX53_PAD_EIM_DA13__GPIO3_13    0x80000000
-				MX53_PAD_EIM_D19__GPIO3_19     0x80000000
-				MX53_PAD_KEY_ROW2__GPIO4_11    0x80000000
-				MX53_PAD_PATA_DA_0__GPIO7_6    0x80000000
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D16__ECSPI1_SCLK		0x80000000
-				MX53_PAD_EIM_D17__ECSPI1_MISO		0x80000000
-				MX53_PAD_EIM_D18__ECSPI1_MOSI		0x80000000
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
-				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
-				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
-				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
-				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
-				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
-			>;
-		};
-
-		pinctrl_esdhc2: esdhc2grp {
-			fsl,pins = <
-				MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
-				MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
-				MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
-				MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
-				MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
-				MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
-			>;
-		};
-
-		pinctrl_esdhc3: esdhc3grp {
-			fsl,pins = <
-				MX53_PAD_PATA_DATA8__ESDHC3_DAT0	0x1d5
-				MX53_PAD_PATA_DATA9__ESDHC3_DAT1	0x1d5
-				MX53_PAD_PATA_DATA10__ESDHC3_DAT2	0x1d5
-				MX53_PAD_PATA_DATA11__ESDHC3_DAT3	0x1d5
-				MX53_PAD_PATA_DATA0__ESDHC3_DAT4	0x1d5
-				MX53_PAD_PATA_DATA1__ESDHC3_DAT5	0x1d5
-				MX53_PAD_PATA_DATA2__ESDHC3_DAT6	0x1d5
-				MX53_PAD_PATA_DATA3__ESDHC3_DAT7	0x1d5
-				MX53_PAD_PATA_RESET_B__ESDHC3_CMD	0x1d5
-				MX53_PAD_PATA_IORDY__ESDHC3_CLK		0x1d5
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
-				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
-				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
-				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
-				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
-				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
-				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
-				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
-				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
-				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT8__I2C1_SDA		0xc0000000
-				MX53_PAD_CSI0_DAT9__I2C1_SCL		0xc0000000
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX53_PAD_KEY_ROW3__I2C2_SDA		0xc0000000
-				MX53_PAD_KEY_COL3__I2C2_SCL		0xc0000000
-			>;
-		};
-
-		pinctrl_ipu_csi0: ipucsi0grp {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12    0x1c4
-				MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13    0x1c4
-				MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14    0x1c4
-				MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15    0x1c4
-				MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16    0x1c4
-				MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17    0x1c4
-				MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18    0x1c4
-				MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19    0x1c4
-				MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK 0x1e4
-				MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC   0x1e4
-				MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC    0x1e4
-				MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN 0x1e4
-			>;
-		};
-
-		pinctrl_ov5642: ov5642grp {
-			fsl,pins = <
-				MX53_PAD_NANDF_WP_B__GPIO6_9   0x1e4
-				MX53_PAD_NANDF_RB0__GPIO6_10   0x1e4
-				MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x1c4
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT10__UART1_TXD_MUX	0x1e4
-				MX53_PAD_CSI0_DAT11__UART1_RXD_MUX	0x1e4
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
-				MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
-				MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
-				MX53_PAD_PATA_DA_1__UART3_CTS		0x1e4
-				MX53_PAD_PATA_DA_2__UART3_RTS		0x1e4
-			>;
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	codec: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-	};
-
-	magnetometer: mag3110@e {
-		compatible = "fsl,mag3110";
-		reg = <0x0e>;
-	};
-
-	touchkey: mpr121@5a {
-		compatible = "fsl,mpr121";
-		reg = <0x5a>;
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	accelerometer: mma8450@1c {
-		compatible = "fsl,mma8450";
-		reg = <0x1c>;
-	};
-
-	camera: ov5642@3c {
-		compatible = "ovti,ov5642";
-		reg = <0x3c>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ov5642>;
-		assigned-clocks = <&clks IMX5_CLK_SSI_EXT1_SEL>,
-				  <&clks IMX5_CLK_SSI_EXT1_COM_SEL>;
-		assigned-clock-parents = <&clks IMX5_CLK_PLL2_SW>,
-					 <&clks IMX5_CLK_SSI_EXT1_PODF>;
-		assigned-clock-rates = <0>, <24000000>;
-		clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
-		clock-names = "xclk";
-		DVDD-supply = <&ldo9_reg>;
-		AVDD-supply = <&ldo7_reg>;
-		reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>;
-		powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;
-
-		port {
-			ov5642_to_ipu_csi0: endpoint {
-				remote-endpoint = <&ipu_csi0_from_parallel_sensor>;
-				bus-width = <8>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-			};
-		};
-	};
-
-	pmic: dialog@48 {
-		compatible = "dlg,da9053", "dlg,da9052";
-		reg = <0x48>;
-		interrupt-parent = <&gpio7>;
-		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
-
-		regulators {
-			ldo7_reg: ldo7 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3600000>;
-			};
-
-			ldo9_reg: ldo9 {
-				regulator-min-microvolt = <1250000>;
-				regulator-max-microvolt = <3650000>;
-			};
-		};
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&ipu_csi0_from_parallel_sensor {
-	remote-endpoint = <&ov5642_to_ipu_csi0>;
-	data-shift = <12>; /* Lines 19:12 used */
-	hsync-active = <1>;
-	vsync-active = <1>;
-};
-
-&ipu_csi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ipu_csi0>;
-};
diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi
deleted file mode 100644
index 7e7f9f3b3906..000000000000
--- a/arch/arm/boot/dts/imx53-tqma53.dtsi
+++ /dev/null
@@ -1,289 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix
- */
-
-#include "imx53.dtsi"
-
-/ {
-	model = "TQ TQMa53";
-	compatible = "tq,tqma53", "fsl,imx53";
-
-	memory@70000000 {
-		device_type = "memory";
-		reg = <0x70000000 0x40000000>; /* Up to 1GiB */
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-};
-
-&esdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc2>,
-		    <&pinctrl_esdhc2_cdwp>;
-	vmmc-supply = <&reg_3p3v>;
-	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	status = "disabled";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "disabled";
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio3 19 GPIO_ACTIVE_LOW>,
-		   <&gpio3 24 GPIO_ACTIVE_LOW>, <&gpio3 25 GPIO_ACTIVE_LOW>;
-	status = "disabled";
-};
-
-&esdhc3 { /* EMMC */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc3>;
-	vmmc-supply = <&reg_3p3v>;
-	non-removable;
-	bus-width = <8>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx53-tqma53 {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				 MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000 /* SSI_MCLK */
-				 MX53_PAD_PATA_DA_1__GPIO7_7     0x80000000 /* LCD_BLT_EN */
-				 MX53_PAD_PATA_DA_2__GPIO7_8     0x80000000 /* LCD_RESET */
-				 MX53_PAD_PATA_DATA5__GPIO2_5    0x80000000 /* LCD_POWER */
-				 MX53_PAD_PATA_DATA6__GPIO2_6    0x80000000 /* PMIC_INT */
-				 MX53_PAD_PATA_DATA14__GPIO2_14  0x80000000 /* CSI_RST */
-				 MX53_PAD_PATA_DATA15__GPIO2_15  0x80000000 /* CSI_PWDN */
-				 MX53_PAD_GPIO_19__GPIO4_5 	 0x80000000 /* #SYSTEM_DOWN */
-				 MX53_PAD_GPIO_3__GPIO1_3        0x80000000
-				 MX53_PAD_PATA_DA_0__GPIO7_6	 0x80000000 /* #PHY_RESET */
-				 MX53_PAD_GPIO_1__PWM2_PWMO	 0x80000000 /* LCD_CONTRAST */
-			>;
-		};
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	0x80000000
-				MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
-				MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
-				MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
-			>;
-		};
-
-		pinctrl_can1: can1grp {
-			fsl,pins = <
-				MX53_PAD_KEY_COL2__CAN1_TXCAN		0x80000000
-				MX53_PAD_KEY_ROW2__CAN1_RXCAN		0x80000000
-			>;
-		};
-
-		pinctrl_can2: can2grp {
-			fsl,pins = <
-				MX53_PAD_KEY_COL4__CAN2_TXCAN		0x80000000
-				MX53_PAD_KEY_ROW4__CAN2_RXCAN		0x80000000
-			>;
-		};
-
-		pinctrl_cspi: cspigrp {
-			fsl,pins = <
-				MX53_PAD_SD1_DATA0__CSPI_MISO		0x1d5
-				MX53_PAD_SD1_CMD__CSPI_MOSI		0x1d5
-				MX53_PAD_SD1_CLK__CSPI_SCLK		0x1d5
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D16__ECSPI1_SCLK		0x80000000
-				MX53_PAD_EIM_D17__ECSPI1_MISO		0x80000000
-				MX53_PAD_EIM_D18__ECSPI1_MOSI		0x80000000
-			>;
-		};
-
-		pinctrl_esdhc2: esdhc2grp {
-			fsl,pins = <
-				MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
-				MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
-				MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
-				MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
-				MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
-				MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
-			>;
-		};
-
-		pinctrl_esdhc2_cdwp: esdhc2cdwp {
-			fsl,pins = <
-				MX53_PAD_GPIO_4__GPIO1_4	0x80000000 /* SD2_CD */
-				MX53_PAD_GPIO_2__GPIO1_2	0x80000000 /* SD2_WP */
-			>;
-		};
-
-		pinctrl_esdhc3: esdhc3grp {
-			fsl,pins = <
-				MX53_PAD_PATA_DATA8__ESDHC3_DAT0	0x1d5
-				MX53_PAD_PATA_DATA9__ESDHC3_DAT1	0x1d5
-				MX53_PAD_PATA_DATA10__ESDHC3_DAT2	0x1d5
-				MX53_PAD_PATA_DATA11__ESDHC3_DAT3	0x1d5
-				MX53_PAD_PATA_DATA0__ESDHC3_DAT4	0x1d5
-				MX53_PAD_PATA_DATA1__ESDHC3_DAT5	0x1d5
-				MX53_PAD_PATA_DATA2__ESDHC3_DAT6	0x1d5
-				MX53_PAD_PATA_DATA3__ESDHC3_DAT7	0x1d5
-				MX53_PAD_PATA_RESET_B__ESDHC3_CMD	0x1d5
-				MX53_PAD_PATA_IORDY__ESDHC3_CLK		0x1d5
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
-				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
-				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
-				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
-				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
-				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
-				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
-				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
-				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
-				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX53_PAD_KEY_ROW3__I2C2_SDA		0xc0000000
-				MX53_PAD_KEY_COL3__I2C2_SCL		0xc0000000
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX53_PAD_GPIO_6__I2C3_SDA		0xc0000000
-				MX53_PAD_GPIO_5__I2C3_SCL		0xc0000000
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
-				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
-				MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
-				MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
-			>;
-		};
-	};
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-};
-
-&pwm2 {
-	#pwm-cells = <2>;
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	status = "disabled";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "disabled";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	status = "disabled";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can2>;
-	status = "disabled";
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "disabled";
-};
-
-&cspi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cspi>;
-	cs-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>, <&gpio1 19 GPIO_ACTIVE_LOW>,
-		   <&gpio1 21 GPIO_ACTIVE_LOW>;
-	status = "disabled";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	pmic: mc34708@8 {
-		compatible = "fsl,mc34708";
-		reg = <0x8>;
-		fsl,mc13xxx-uses-rtc;
-		interrupt-parent = <&gpio2>;
-		interrupts = <6 4>; /* PATA_DATA6, active high */
-	};
-
-	sensor1: lm75@48 {
-		compatible = "lm75";
-		reg = <0x48>;
-	};
-
-	eeprom: 24c64@50 {
-		compatible = "atmel,24c64";
-		pagesize = <32>;
-		reg = <0x50>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "rmii";
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/imx53-tx53-x03x.dts b/arch/arm/boot/dts/imx53-tx53-x03x.dts
deleted file mode 100644
index a7f77527269d..000000000000
--- a/arch/arm/boot/dts/imx53-tx53-x03x.dts
+++ /dev/null
@@ -1,351 +0,0 @@
-/*
- * Copyright 2013-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx53-tx53.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	model = "Ka-Ro electronics TX53 module (LCD)";
-	compatible = "karo,tx53", "fsl,imx53";
-
-	aliases {
-		display = &display;
-	};
-
-	display: disp0 {
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_rgb24_vga1>;
-		status = "okay";
-
-		port {
-			display0_in: endpoint {
-				remote-endpoint = <&ipu_di0_disp0>;
-			};
-		};
-
-		display-timings {
-			VGA {
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <48>;
-				hsync-len = <96>;
-				hfront-porch = <16>;
-				vback-porch = <31>;
-				vsync-len = <2>;
-				vfront-porch = <12>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ETV570 {
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <114>;
-				hsync-len = <30>;
-				hfront-porch = <16>;
-				vback-porch = <32>;
-				vsync-len = <3>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0350 {
-				clock-frequency = <6413760>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <34>;
-				hsync-len = <34>;
-				hfront-porch = <20>;
-				vback-porch = <15>;
-				vsync-len = <3>;
-				vfront-porch = <4>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0430 {
-				clock-frequency = <9009000>;
-				hactive = <480>;
-				vactive = <272>;
-				hback-porch = <2>;
-				hsync-len = <41>;
-				hfront-porch = <2>;
-				vback-porch = <2>;
-				vsync-len = <10>;
-				vfront-porch = <2>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			ET0500 {
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0700 { /* same as ET0500 */
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ETQ570 {
-				clock-frequency = <6596040>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <38>;
-				hsync-len = <30>;
-				hfront-porch = <30>;
-				vback-porch = <16>;
-				vsync-len = <3>;
-				vfront-porch = <4>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
-		power-supply = <&reg_3v3>;
-		brightness-levels = <
-			  0  1  2  3  4  5  6  7  8  9
-			 10 11 12 13 14 15 16 17 18 19
-			 20 21 22 23 24 25 26 27 28 29
-			 30 31 32 33 34 35 36 37 38 39
-			 40 41 42 43 44 45 46 47 48 49
-			 50 51 52 53 54 55 56 57 58 59
-			 60 61 62 63 64 65 66 67 68 69
-			 70 71 72 73 74 75 76 77 78 79
-			 80 81 82 83 84 85 86 87 88 89
-			 90 91 92 93 94 95 96 97 98 99
-			100
-		>;
-		default-brightness-level = <50>;
-	};
-
-	reg_lcd_pwr: regulator-lcd-pwr {
-		compatible = "regulator-fixed";
-		regulator-name = "LCD POWER";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-boot-on;
-	};
-
-	reg_lcd_reset: regulator-lcd-reset {
-		compatible = "regulator-fixed";
-		regulator-name = "LCD RESET";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-boot-on;
-	};
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	sgtl5000: codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		#sound-dai-cells = <0>;
-		VDDA-supply = <&reg_2v5>;
-		VDDIO-supply = <&reg_3v3>;
-		clocks = <&mclk>;
-	};
-
-	polytouch: edt-ft5x06@38 {
-		compatible = "edt,edt-ft5x06";
-		reg = <0x38>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_edt_ft5x06_1>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
-		wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
-		wakeup-source;
-	};
-
-	touchscreen: tsc2007@48 {
-		compatible = "ti,tsc2007";
-		reg = <0x48>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tsc2007>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
-		gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
-		ti,x-plate-ohms = <660>;
-		wakeup-source;
-	};
-};
-
-&iomuxc {
-	imx53-tx53-x03x {
-		pinctrl_edt_ft5x06_1: edt-ft5x06grp-1 {
-			fsl,pins = <
-				MX53_PAD_NANDF_CS2__GPIO6_15 0x1f0 /* Interrupt */
-				MX53_PAD_EIM_A16__GPIO2_22   0x04 /* Reset */
-				MX53_PAD_EIM_A17__GPIO2_21   0x04 /* Wake */
-			>;
-		};
-
-		pinctrl_kpp: kppgrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_9__KPP_COL_6 0x1f4
-				MX53_PAD_GPIO_4__KPP_COL_7 0x1f4
-				MX53_PAD_KEY_COL2__KPP_COL_2 0x1f4
-				MX53_PAD_KEY_COL3__KPP_COL_3 0x1f4
-				MX53_PAD_GPIO_2__KPP_ROW_6 0x1f4
-				MX53_PAD_GPIO_5__KPP_ROW_7 0x1f4
-				MX53_PAD_KEY_ROW2__KPP_ROW_2 0x1f4
-				MX53_PAD_KEY_ROW3__KPP_ROW_3 0x1f4
-			>;
-		};
-
-		pinctrl_rgb24_vga1: rgb24-vgagrp1 {
-			fsl,pins = <
-				MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK		0x5
-				MX53_PAD_DI0_PIN15__IPU_DI0_PIN15		0x5
-				MX53_PAD_DI0_PIN2__IPU_DI0_PIN2			0x5
-				MX53_PAD_DI0_PIN3__IPU_DI0_PIN3			0x5
-				MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0		0x5
-				MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1		0x5
-				MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2		0x5
-				MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3		0x5
-				MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4		0x5
-				MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5		0x5
-				MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6		0x5
-				MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7		0x5
-				MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8		0x5
-				MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9		0x5
-				MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10		0x5
-				MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11		0x5
-				MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12		0x5
-				MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13		0x5
-				MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14		0x5
-				MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15		0x5
-				MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16		0x5
-				MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17		0x5
-				MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18		0x5
-				MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19		0x5
-				MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20		0x5
-				MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21		0x5
-				MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22		0x5
-				MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23		0x5
-			>;
-		};
-
-		pinctrl_tsc2007: tsc2007grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D26__GPIO3_26 0x1f0 /* Interrupt */
-			>;
-		};
-	};
-};
-
-&ipu_di0_disp0 {
-	remote-endpoint = <&display0_in>;
-};
-
-&kpp {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_kpp>;
-	/* sample keymap */
-	/* row/col 0,1 are mapped to KPP row/col 6,7 */
-	linux,keymap = <
-		MATRIX_KEY(6, 6, KEY_POWER)
-		MATRIX_KEY(6, 7, KEY_KP0)
-		MATRIX_KEY(6, 2, KEY_KP1)
-		MATRIX_KEY(6, 3, KEY_KP2)
-		MATRIX_KEY(7, 6, KEY_KP3)
-		MATRIX_KEY(7, 7, KEY_KP4)
-		MATRIX_KEY(7, 2, KEY_KP5)
-		MATRIX_KEY(7, 3, KEY_KP6)
-		MATRIX_KEY(2, 6, KEY_KP7)
-		MATRIX_KEY(2, 7, KEY_KP8)
-		MATRIX_KEY(2, 2, KEY_KP9)
-	>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-tx53-x13x.dts b/arch/arm/boot/dts/imx53-tx53-x13x.dts
deleted file mode 100644
index 6cdf2082c742..000000000000
--- a/arch/arm/boot/dts/imx53-tx53-x13x.dts
+++ /dev/null
@@ -1,262 +0,0 @@
-/*
- * Copyright 2013-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx53-tx53.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Ka-Ro electronics TX53 module (LVDS)";
-	compatible = "karo,tx53", "fsl,imx53";
-
-	aliases {
-		display = &lvds0;
-		lvds0 = &lvds0;
-		lvds1 = &lvds1;
-	};
-
-	backlight0: backlight0 {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 500000 0>;
-		power-supply = <&reg_3v3>;
-		brightness-levels = <
-			  0  1  2  3  4  5  6  7  8  9
-			 10 11 12 13 14 15 16 17 18 19
-			 20 21 22 23 24 25 26 27 28 29
-			 30 31 32 33 34 35 36 37 38 39
-			 40 41 42 43 44 45 46 47 48 49
-			 50 51 52 53 54 55 56 57 58 59
-			 60 61 62 63 64 65 66 67 68 69
-			 70 71 72 73 74 75 76 77 78 79
-			 80 81 82 83 84 85 86 87 88 89
-			 90 91 92 93 94 95 96 97 98 99
-			100
-		>;
-		default-brightness-level = <50>;
-	};
-
-	backlight1: backlight1 {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 500000 0>;
-		power-supply = <&reg_3v3>;
-		brightness-levels = <
-			  0  1  2  3  4  5  6  7  8  9
-			 10 11 12 13 14 15 16 17 18 19
-			 20 21 22 23 24 25 26 27 28 29
-			 30 31 32 33 34 35 36 37 38 39
-			 40 41 42 43 44 45 46 47 48 49
-			 50 51 52 53 54 55 56 57 58 59
-			 60 61 62 63 64 65 66 67 68 69
-			 70 71 72 73 74 75 76 77 78 79
-			 80 81 82 83 84 85 86 87 88 89
-			 90 91 92 93 94 95 96 97 98 99
-			100
-		>;
-		default-brightness-level = <50>;
-	};
-
-	reg_lcd_pwr0: regulator-lvds0-pwr {
-		compatible = "regulator-fixed";
-		regulator-name = "LVDS0 POWER";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-boot-on;
-	};
-
-	reg_lcd_pwr1: regulator-lvds1-pwr {
-		compatible = "regulator-fixed";
-		regulator-name = "LVDS1 POWER";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-boot-on;
-	};
-};
-
-&i2c3 {
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	pinctrl-1 = <&pinctrl_i2c3_gpio>;
-	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-
-	sgtl5000: codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		#sound-dai-cells = <0>;
-		VDDA-supply = <&reg_2v5>;
-		VDDIO-supply = <&reg_3v3>;
-		clocks = <&mclk>;
-	};
-};
-
-&iomuxc {
-	imx53-tx53-x13x {
-		pinctrl_lvds0: lvds0grp {
-			fsl,pins = <
-				MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000
-				MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000
-				MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000
-				MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000
-				MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000
-			>;
-		};
-
-		pinctrl_lvds1: lvds1grp {
-			fsl,pins = <
-				MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x80000000
-				MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x80000000
-				MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x80000000
-				MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x80000000
-				MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x80000000
-			>;
-		};
-
-		pinctrl_pwm1: pwm1grp {
-			fsl,pins = <MX53_PAD_GPIO_9__PWM1_PWMO 0x04>;
-		};
-
-		pinctrl_eeti1: eeti1grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D22__GPIO3_22 0x1f0 /* Interrupt */
-			>;
-		};
-
-		pinctrl_eeti2: eeti2grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D23__GPIO3_23 0x1f0 /* Interrupt */
-			>;
-		};
-	};
-};
-
-&ldb {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lvds0 &pinctrl_lvds1>;
-	status = "okay";
-
-	lvds0: lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		display-timings {
-			native-mode = <&lvds0_timing0>;
-
-			lvds0_timing0: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hsync-len = <60>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vsync-len = <10>;
-				vfront-porch = <7>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			lvds0_timing1: nl12880bc20 {
-				clock-frequency = <71000000>;
-				hactive = <1280>;
-				vactive = <800>;
-				hback-porch = <50>;
-				hsync-len = <60>;
-				hfront-porch = <50>;
-				vback-porch = <5>;
-				vsync-len = <13>;
-				vfront-porch = <5>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-
-	lvds1: lvds-channel@1 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		display-timings {
-			native-mode = <&lvds1_timing0>;
-
-			lvds1_timing0: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hsync-len = <60>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vsync-len = <10>;
-				vfront-porch = <7>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi
deleted file mode 100644
index 7c9730f3f820..000000000000
--- a/arch/arm/boot/dts/imx53-tx53.dtsi
+++ /dev/null
@@ -1,595 +0,0 @@
-/*
- * Copyright 2012-2017 <LW@KARO-electronics.de>
- * based on imx53-qsb.dts
- *   Copyright 2011 Freescale Semiconductor, Inc.
- *   Copyright 2011 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "imx53.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Ka-Ro electronics TX53 module";
-	compatible = "karo,tx53", "fsl,imx53";
-
-	/* Will be filled by the bootloader */
-	memory@70000000 {
-		device_type = "memory";
-		reg = <0x70000000 0>;
-	};
-
-	aliases {
-		can0 = &can2; /* Make the can interface indices consistent with TX28/TX48 modules */
-		can1 = &can1;
-		ipu = &ipu;
-		reg-can-xcvr = &reg_can_xcvr;
-		usbh1 = &usbh1;
-		usbotg = &usbotg;
-	};
-
-	clocks {
-		ckih1 {
-			clock-frequency = <0>;
-		};
-	};
-
-	mclk: clock-mclk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <26000000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_key>;
-
-		power {
-			label = "Power Button";
-			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
-			linux,code = <116>; /* KEY_POWER */
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_stk5led>;
-
-		user {
-			label = "Heartbeat";
-			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	reg_2v5: regulator-2v5 {
-		compatible = "regulator-fixed";
-		regulator-name = "2V5";
-		regulator-min-microvolt = <2500000>;
-		regulator-max-microvolt = <2500000>;
-	};
-
-	reg_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_can_xcvr: regulator-can-xcvr {
-		compatible = "regulator-fixed";
-		regulator-name = "CAN XCVR";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_can_xcvr>;
-		gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
-	};
-
-	reg_usbh1_vbus: regulator-usbh1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usbh1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbh1_vbus>;
-		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_usbotg_vbus: regulator-usbotg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usbotg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbotg_vbus>;
-		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	sound {
-		compatible = "karo,tx53-audio-sgtl5000", "fsl,imx-audio-sgtl5000";
-		model = "tx53-audio-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		/* '1' based port numbers according to datasheet names */
-		mux-int-port = <1>;
-		mux-ext-port = <5>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ssi1>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	xceiver-supply = <&reg_can_xcvr>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can2>;
-	xceiver-supply = <&reg_can_xcvr>;
-	status = "okay";
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	cs-gpios = <
-		&gpio2 30 GPIO_ACTIVE_HIGH
-		&gpio3 19 GPIO_ACTIVE_HIGH
-	>;
-
-	spidev0: spi@0 {
-		compatible = "spidev";
-		reg = <0>;
-		spi-max-frequency = <54000000>;
-	};
-
-	spidev1: spi@1 {
-		compatible = "spidev";
-		reg = <1>;
-		spi-max-frequency = <54000000>;
-	};
-};
-
-&esdhc1 {
-	cd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
-	fsl,wp-controller;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	status = "okay";
-};
-
-&esdhc2 {
-	cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
-	fsl,wp-controller;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc2>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
-	phy-handle = <&phy0>;
-	mac-address = [000000000000]; /* placeholder; will be overwritten by bootloader */
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		phy0: ethernet-phy@0 {
-			reg = <0>;
-			interrupt-parent = <&gpio2>;
-			interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
-			device_type = "ethernet-phy";
-		};
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	pinctrl-0 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
-	clock-frequency = <400000>;
-	status = "okay";
-
-	rtc1: ds1339@68 {
-		compatible = "dallas,ds1339";
-		reg = <0x68>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ds1339>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
-		trickle-resistor-ohms = <250>;
-		trickle-diode-disable;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx53-tx53 {
-		pinctrl_hog: hoggrp {
-			/* pins not in use by any device on the Starterkit board series */
-			fsl,pins = <
-				/* CMOS Sensor Interface */
-				MX53_PAD_CSI0_DAT12__GPIO5_30 0x1f4
-				MX53_PAD_CSI0_DAT13__GPIO5_31 0x1f4
-				MX53_PAD_CSI0_DAT14__GPIO6_0 0x1f4
-				MX53_PAD_CSI0_DAT15__GPIO6_1 0x1f4
-				MX53_PAD_CSI0_DAT16__GPIO6_2 0x1f4
-				MX53_PAD_CSI0_DAT17__GPIO6_3 0x1f4
-				MX53_PAD_CSI0_DAT18__GPIO6_4 0x1f4
-				MX53_PAD_CSI0_DAT19__GPIO6_5 0x1f4
-				MX53_PAD_CSI0_MCLK__GPIO5_19 0x1f4
-				MX53_PAD_CSI0_VSYNC__GPIO5_21 0x1f4
-				MX53_PAD_CSI0_PIXCLK__GPIO5_18 0x1f4
-				MX53_PAD_GPIO_0__GPIO1_0 0x1f4
-				/* Module Specific Signal */
-				/* MX53_PAD_NANDF_CS2__GPIO6_15 0x1f4 maybe used by EDT-FT5x06 */
-				/* MX53_PAD_EIM_A16__GPIO2_22 0x1f4 maybe used by EDT-FT5x06 */
-				MX53_PAD_EIM_D29__GPIO3_29 0x1f4
-				MX53_PAD_EIM_EB3__GPIO2_31 0x1f4
-				/* MX53_PAD_EIM_A17__GPIO2_21 0x1f4 maybe used by EDT-FT5x06 */
-				/* MX53_PAD_EIM_A18__GPIO2_20 0x1f4 used by LED */
-				MX53_PAD_EIM_A19__GPIO2_19 0x1f4
-				MX53_PAD_EIM_A20__GPIO2_18 0x1f4
-				MX53_PAD_EIM_A21__GPIO2_17 0x1f4
-				MX53_PAD_EIM_A22__GPIO2_16 0x1f4
-				MX53_PAD_EIM_A23__GPIO6_6 0x1f4
-				MX53_PAD_EIM_A24__GPIO5_4 0x1f4
-				MX53_PAD_CSI0_DAT8__GPIO5_26 0x1f4
-				MX53_PAD_CSI0_DAT9__GPIO5_27 0x1f4
-				MX53_PAD_CSI0_DAT10__GPIO5_28 0x1f4
-				MX53_PAD_CSI0_DAT11__GPIO5_29 0x1f4
-				/* MX53_PAD_EIM_D22__GPIO3_22 0x1f4 maybe used by EETI touchpanel driver */
-				/* MX53_PAD_EIM_D23__GPIO3_23 0x1f4 maybe used by EETI touchpanel driver */
-				MX53_PAD_GPIO_13__GPIO4_3 0x1f4
-				MX53_PAD_EIM_CS0__GPIO2_23 0x1f4
-				MX53_PAD_EIM_CS1__GPIO2_24 0x1f4
-				MX53_PAD_CSI0_DATA_EN__GPIO5_20 0x1f4
-				MX53_PAD_EIM_WAIT__GPIO5_0 0x1f4
-				MX53_PAD_EIM_EB0__GPIO2_28 0x1f4
-				MX53_PAD_EIM_EB1__GPIO2_29 0x1f4
-				MX53_PAD_EIM_OE__GPIO2_25 0x1f4
-				MX53_PAD_EIM_LBA__GPIO2_27 0x1f4
-				MX53_PAD_EIM_RW__GPIO2_26 0x1f4
-				MX53_PAD_EIM_DA8__GPIO3_8 0x1f4
-				MX53_PAD_EIM_DA9__GPIO3_9 0x1f4
-				MX53_PAD_EIM_DA10__GPIO3_10 0x1f4
-				MX53_PAD_EIM_DA11__GPIO3_11 0x1f4
-				MX53_PAD_EIM_DA12__GPIO3_12 0x1f4
-				MX53_PAD_EIM_DA13__GPIO3_13 0x1f4
-				MX53_PAD_EIM_DA14__GPIO3_14 0x1f4
-				MX53_PAD_EIM_DA15__GPIO3_15 0x1f4
-				>;
-		};
-
-		pinctrl_can1: can1grp {
-			fsl,pins = <
-				MX53_PAD_GPIO_7__CAN1_TXCAN		0x80000000
-				MX53_PAD_GPIO_8__CAN1_RXCAN		0x80000000
-			>;
-		};
-
-		pinctrl_can2: can2grp {
-			fsl,pins = <
-				MX53_PAD_KEY_COL4__CAN2_TXCAN		0x80000000
-				MX53_PAD_KEY_ROW4__CAN2_RXCAN		0x80000000
-			>;
-		};
-
-		pinctrl_can_xcvr: can-xcvrgrp {
-			fsl,pins = <MX53_PAD_DISP0_DAT0__GPIO4_21 0xe0>; /* Flexcan XCVR enable */
-		};
-
-		pinctrl_ds1339: ds1339grp {
-			fsl,pins = <MX53_PAD_DI0_PIN4__GPIO4_20 0xe0>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX53_PAD_GPIO_19__ECSPI1_RDY		0x80000000
-				MX53_PAD_EIM_EB2__ECSPI1_SS0		0x80000000
-				MX53_PAD_EIM_D16__ECSPI1_SCLK		0x80000000
-				MX53_PAD_EIM_D17__ECSPI1_MISO		0x80000000
-				MX53_PAD_EIM_D18__ECSPI1_MOSI		0x80000000
-				MX53_PAD_EIM_D19__ECSPI1_SS1		0x80000000
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
-				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
-				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
-				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
-				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
-				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
-				MX53_PAD_EIM_D24__GPIO3_24 0x1f0
-			>;
-		};
-
-		pinctrl_esdhc2: esdhc2grp {
-			fsl,pins = <
-				MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
-				MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
-				MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
-				MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
-				MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
-				MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
-				MX53_PAD_EIM_D25__GPIO3_25 0x1f0
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
-				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
-				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
-				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
-				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
-				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
-				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
-				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
-				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
-				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
-			>;
-		};
-
-		pinctrl_gpio_key: gpio-keygrp {
-			fsl,pins = <MX53_PAD_EIM_A25__GPIO5_2 0x1f4>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D21__I2C1_SCL		0x400001e4
-				MX53_PAD_EIM_D28__I2C1_SDA		0x400001e4
-			>;
-		};
-
-		pinctrl_i2c1_gpio: i2c1-gpiogrp {
-			fsl,pins = <
-				MX53_PAD_EIM_D21__GPIO3_21		0x400001e6
-				MX53_PAD_EIM_D28__GPIO3_28		0x400001e6
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX53_PAD_GPIO_3__I2C3_SCL		0x400001e4
-				MX53_PAD_GPIO_6__I2C3_SDA		0x400001e4
-			>;
-		};
-
-		pinctrl_i2c3_gpio: i2c3-gpiogrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_3__GPIO1_3		0x400001e6
-				MX53_PAD_GPIO_6__GPIO1_6		0x400001e6
-			>;
-		};
-
-		pinctrl_nand: nandgrp {
-			fsl,pins = <
-				MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B	0x4
-				MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B	0x4
-				MX53_PAD_NANDF_CLE__EMI_NANDF_CLE	0x4
-				MX53_PAD_NANDF_ALE__EMI_NANDF_ALE	0x4
-				MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B	0xe0
-				MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0	0xe0
-				MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0	0x4
-				MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0	0xa4
-				MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1	0xa4
-				MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2	0xa4
-				MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3	0xa4
-				MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4	0xa4
-				MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5	0xa4
-				MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6	0xa4
-				MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7	0xa4
-			>;
-		};
-
-		pinctrl_pwm2: pwm2grp {
-			fsl,pins = <
-				MX53_PAD_GPIO_1__PWM2_PWMO		0x80000000
-			>;
-		};
-
-		pinctrl_ssi1: ssi1grp {
-			fsl,pins = <
-				MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	0x80000000
-				MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
-				MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
-				MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
-			>;
-		};
-
-		pinctrl_ssi2: ssi2grp {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC	0x80000000
-				MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD	0x80000000
-				MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS	0x80000000
-				MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD	0x80000000
-				MX53_PAD_EIM_D27__GPIO3_27 0x1f0
-			>;
-		};
-
-		pinctrl_stk5led: stk5ledgrp {
-			fsl,pins = <MX53_PAD_EIM_A18__GPIO2_20 0xc0>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
-				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
-				MX53_PAD_PATA_RESET_B__UART1_CTS	0x1c5
-				MX53_PAD_PATA_IORDY__UART1_RTS		0x1c5
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1c5
-				MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1c5
-				MX53_PAD_PATA_DIOR__UART2_RTS		0x1c5
-				MX53_PAD_PATA_INTRQ__UART2_CTS		0x1c5
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
-				MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
-				MX53_PAD_PATA_DA_1__UART3_CTS		0x1e4
-				MX53_PAD_PATA_DA_2__UART3_RTS		0x1e4
-			>;
-		};
-
-		pinctrl_usbh1: usbh1grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D30__GPIO3_30 0x100 /* OC */
-			>;
-		};
-
-		pinctrl_usbh1_vbus: usbh1-vbusgrp {
-			fsl,pins = <
-				MX53_PAD_EIM_D31__GPIO3_31 0xe0 /* VBUS ENABLE */
-			>;
-		};
-
-		pinctrl_usbotg_vbus: usbotg-vbusgrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_7__GPIO1_7 0xe0 /* VBUS ENABLE */
-				MX53_PAD_GPIO_8__GPIO1_8 0x100 /* OC */
-			>;
-		};
-	};
-};
-
-&ipu {
-	status = "okay";
-};
-
-&nfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nand>;
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>;
-};
-
-&sdma {
-	fsl,sdma-ram-script-name = "sdma-imx53.bin";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&ssi2 {
-	status = "disabled";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbh1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh1>;
-	phy_type = "utmi";
-	disable-over-current;
-	vbus-supply = <&reg_usbh1_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	phy_type = "utmi";
-	dr_mode = "peripheral";
-	disable-over-current;
-	vbus-supply = <&reg_usbotg_vbus>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-usbarmory.dts b/arch/arm/boot/dts/imx53-usbarmory.dts
deleted file mode 100644
index f34993a490ee..000000000000
--- a/arch/arm/boot/dts/imx53-usbarmory.dts
+++ /dev/null
@@ -1,225 +0,0 @@
-/*
- * USB armory MkI device tree file
- * https://inversepath.com/usbarmory
- *
- * Copyright (C) 2015, Inverse Path
- * Andrej Rosano <andrej@inversepath.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx53.dtsi"
-
-/ {
-	model = "Inverse Path USB armory";
-	compatible = "inversepath,imx53-usbarmory", "fsl,imx53";
-};
-
-/ {
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	memory@70000000 {
-		device_type = "memory";
-		reg = <0x70000000 0x20000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_led>;
-
-		user {
-			label = "LED";
-			gpios = <&gpio4 27 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
-
-/*
- * Not every i.MX53 P/N supports clock > 800MHz.
- * As USB armory does not mount a specific P/N set a safe clock upper limit.
- */
-&cpu0 {
-	operating-points = <
-		/* kHz */
-		166666  850000
-		400000  900000
-		800000 1050000
-	>;
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_esdhc1: esdhc1grp {
-		fsl,pins = <
-			MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
-			MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
-			MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
-			MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
-			MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
-			MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
-		>;
-	};
-
-	pinctrl_i2c1_pmic: i2c1grp {
-		fsl,pins = <
-			MX53_PAD_EIM_D21__I2C1_SCL	0x80
-			MX53_PAD_EIM_D28__I2C1_SDA	0x80
-		>;
-	};
-
-	pinctrl_led: ledgrp {
-		fsl,pins = <
-			MX53_PAD_DISP0_DAT6__GPIO4_27 0x1e4
-		>;
-	};
-
-	/*
-	 * UART mode pin header configuration
-	 * 3 - GPIO5[26], pull-down 100K
-	 * 4 - GPIO5[27], pull-down 100K
-	 * 5 - TX, pull-up 100K
-	 * 6 - RX, pull-up 100K
-	 * 7 - GPIO5[30], pull-down 100K
-	 */
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX53_PAD_CSI0_DAT8__GPIO5_26		0xc0
-			MX53_PAD_CSI0_DAT9__GPIO5_27		0xc0
-			MX53_PAD_CSI0_DAT10__UART1_TXD_MUX	0x1e4
-			MX53_PAD_CSI0_DAT11__UART1_RXD_MUX	0x1e4
-			MX53_PAD_CSI0_DAT12__GPIO5_30		0xc0
-		>;
-	};
-};
-
-&i2c1 {
-	pinctrl-0 = <&pinctrl_i2c1_pmic>;
-	status = "okay";
-
-	ltc3589: pmic@34 {
-		compatible = "lltc,ltc3589-2";
-		reg = <0x34>;
-
-		regulators {
-			sw1_reg: sw1 {
-				regulator-min-microvolt = <591930>;
-				regulator-max-microvolt = <1224671>;
-				lltc,fb-voltage-divider = <100000 158000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <704123>;
-				regulator-max-microvolt = <1456803>;
-				lltc,fb-voltage-divider = <180000 191000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3_reg: sw3 {
-				regulator-min-microvolt = <1341250>;
-				regulator-max-microvolt = <2775000>;
-				lltc,fb-voltage-divider = <270000 100000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			bb_out_reg: bb-out {
-				regulator-min-microvolt = <3387341>;
-				regulator-max-microvolt = <3387341>;
-				lltc,fb-voltage-divider = <511000 158000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo1_reg: ldo1 {
-				regulator-min-microvolt = <1306329>;
-				regulator-max-microvolt = <1306329>;
-				lltc,fb-voltage-divider = <100000 158000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo2_reg: ldo2 {
-				regulator-min-microvolt = <704123>;
-				regulator-max-microvolt = <1456806>;
-				lltc,fb-voltage-divider = <180000 191000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo3_reg: ldo3 {
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-boot-on;
-			};
-
-			ldo4_reg: ldo4 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3200000>;
-			};
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usbotg {
-	dr_mode = "peripheral";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-voipac-bsb.dts b/arch/arm/boot/dts/imx53-voipac-bsb.dts
deleted file mode 100644
index ae53d178a683..000000000000
--- a/arch/arm/boot/dts/imx53-voipac-bsb.dts
+++ /dev/null
@@ -1,153 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Rostislav Lisovy <lisovy@gmail.com>, PiKRON s.r.o.
- */
-
-/dts-v1/;
-#include "imx53-voipac-dmm-668.dtsi"
-
-/ {
-	sound {
-		compatible = "fsl,imx53-voipac-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx53-voipac-sgtl5000";
-		ssi-controller = <&ssi2>;
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <2>;
-		mux-ext-port = <5>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pin_gpio>;
-
-		led1 {
-			label = "led-red";
-			gpios = <&gpio3 29 0>;
-			default-state = "off";
-		};
-
-		led2 {
-			label = "led-orange";
-			gpios = <&gpio2 31 0>;
-			default-state = "off";
-		};
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx53-voipac {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				/* SD2_CD */
-				MX53_PAD_EIM_D25__GPIO3_25	0x80000000
-				/* SD2_WP */
-				MX53_PAD_EIM_A19__GPIO2_19 	0x80000000
-			>;
-		};
-
-		led_pin_gpio: led_gpio {
-			fsl,pins = <
-				MX53_PAD_EIM_D29__GPIO3_29	0x80000000
-				MX53_PAD_EIM_EB3__GPIO2_31	0x80000000
-			>;
-		};
-
-		/* Keyboard controller */
-		pinctrl_kpp_1: kppgrp-1 {
-			fsl,pins = <
-				MX53_PAD_GPIO_9__KPP_COL_6	0xe8
-				MX53_PAD_GPIO_4__KPP_COL_7	0xe8
-				MX53_PAD_KEY_COL2__KPP_COL_2	0xe8
-				MX53_PAD_KEY_COL3__KPP_COL_3	0xe8
-				MX53_PAD_KEY_COL4__KPP_COL_4	0xe8
-				MX53_PAD_GPIO_2__KPP_ROW_6	0xe0
-				MX53_PAD_GPIO_5__KPP_ROW_7	0xe0
-				MX53_PAD_KEY_ROW2__KPP_ROW_2	0xe0
-				MX53_PAD_KEY_ROW3__KPP_ROW_3	0xe0
-				MX53_PAD_KEY_ROW4__KPP_ROW_4	0xe0
-			>;
-		};
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	0x80000000
-				MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
-				MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
-				MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
-			>;
-		};
-
-		pinctrl_esdhc2: esdhc2grp {
-			fsl,pins = <
-				MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
-				MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
-				MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
-				MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
-				MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
-				MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX53_PAD_GPIO_3__I2C3_SCL		0xc0000000
-				MX53_PAD_GPIO_6__I2C3_SDA		0xc0000000
-			>;
-		};
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>; /* SSI1 */
-	status = "okay";
-};
-
-&esdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc2>;
-	cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	sgtl5000: codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		#sound-dai-cells = <0>;
-		VDDA-supply = <&reg_3p3v>;
-		VDDIO-supply = <&reg_3p3v>;
-		clocks = <&clks 150>;
-	};
-};
-
-&kpp {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_kpp_1>;
-	linux,keymap = <
-			0x0203003b	/* KEY_F1 */
-			0x0603003c	/* KEY_F2 */
-			0x0207003d	/* KEY_F3 */
-			0x0607003e	/* KEY_F4 */
-			>;
-	keypad,num-rows = <8>;
-	keypad,num-columns = <1>;
-	status = "okay";
-};
-
-&ssi2 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
deleted file mode 100644
index 24859d0c09c1..000000000000
--- a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
+++ /dev/null
@@ -1,267 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Rostislav Lisovy <lisovy@gmail.com>, PiKRON s.r.o.
- */
-
-#include "imx53.dtsi"
-
-/ {
-	model = "Voipac i.MX53 X53-DMM-668";
-	compatible = "voipac,imx53-dmm-668", "fsl,imx53";
-
-	memory@70000000 {
-		device_type = "memory";
-		reg = <0x70000000 0x20000000>,
-		      <0xb0000000 0x20000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usb_vbus: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "usb_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 31 0>; /* PEN */
-			enable-active-high;
-		};
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx53-voipac {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				/* Make DA9053 regulator functional */
-				MX53_PAD_GPIO_16__GPIO7_11	0x80000000
-				/* FEC Power enable */
-				MX53_PAD_GPIO_11__GPIO4_1	0x80000000
-				/* FEC RST */
-				MX53_PAD_GPIO_12__GPIO4_2	0x80000000
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D16__ECSPI1_SCLK		0x80000000
-				MX53_PAD_EIM_D17__ECSPI1_MISO		0x80000000
-				MX53_PAD_EIM_D18__ECSPI1_MOSI		0x80000000
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
-				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
-				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
-				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
-				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
-				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
-				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
-				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
-				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
-				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D21__I2C1_SCL		0xc0000000
-				MX53_PAD_EIM_D28__I2C1_SDA		0xc0000000
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
-				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
-			>;
-		};
-
-		pinctrl_nand: nandgrp {
-			fsl,pins = <
-				MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B	0x4
-				MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B	0x4
-				MX53_PAD_NANDF_CLE__EMI_NANDF_CLE	0x4
-				MX53_PAD_NANDF_ALE__EMI_NANDF_ALE	0x4
-				MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B	0xe0
-				MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0	0xe0
-				MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0	0x4
-				MX53_PAD_PATA_DATA0__EMI_NANDF_D_0	0xa4
-				MX53_PAD_PATA_DATA1__EMI_NANDF_D_1	0xa4
-				MX53_PAD_PATA_DATA2__EMI_NANDF_D_2	0xa4
-				MX53_PAD_PATA_DATA3__EMI_NANDF_D_3	0xa4
-				MX53_PAD_PATA_DATA4__EMI_NANDF_D_4	0xa4
-				MX53_PAD_PATA_DATA5__EMI_NANDF_D_5	0xa4
-				MX53_PAD_PATA_DATA6__EMI_NANDF_D_6	0xa4
-				MX53_PAD_PATA_DATA7__EMI_NANDF_D_7	0xa4
-			>;
-		};
-	};
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio3 19 GPIO_ACTIVE_LOW>,
-		   <&gpio2 16 GPIO_ACTIVE_LOW>, <&gpio2 17 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pmic: dialog@48 {
-		compatible = "dlg,da9053-aa", "dlg,da9052";
-		reg = <0x48>;
-		interrupt-parent = <&gpio7>;
-		interrupts = <11 IRQ_TYPE_LEVEL_LOW>; /* low-level active IRQ at GPIO7_11 */
-
-		regulators {
-			buck1_reg: buck1 {
-				regulator-name = "BUCKCORE";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1400000>;
-				regulator-always-on;
-			};
-
-			buck2_reg: buck2 {
-				regulator-name = "BUCKPRO";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-			};
-
-			buck3_reg: buck3 {
-				regulator-name = "BUCKMEM";
-				regulator-min-microvolt = <1420000>;
-				regulator-max-microvolt = <1580000>;
-				regulator-always-on;
-			};
-
-			buck4_reg: buck4 {
-				regulator-name = "BUCKPERI";
-				regulator-min-microvolt = <2370000>;
-				regulator-max-microvolt = <2630000>;
-				regulator-always-on;
-			};
-
-			ldo1_reg: ldo1 {
-				regulator-name = "ldo1_1v3";
-				regulator-min-microvolt = <1250000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo2_reg: ldo2 {
-				regulator-name = "ldo2_1v3";
-				regulator-min-microvolt = <1250000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-			};
-
-			ldo3_reg: ldo3 {
-				regulator-name = "ldo3_3v3";
-				regulator-min-microvolt = <3250000>;
-				regulator-max-microvolt = <3350000>;
-				regulator-always-on;
-			};
-
-			ldo4_reg: ldo4 {
-				regulator-name = "ldo4_2v775";
-				regulator-min-microvolt = <2770000>;
-				regulator-max-microvolt = <2780000>;
-				regulator-always-on;
-			};
-
-			ldo5_reg: ldo5 {
-				regulator-name = "ldo5_3v3";
-				regulator-min-microvolt = <3250000>;
-				regulator-max-microvolt = <3350000>;
-				regulator-always-on;
-			};
-
-			ldo6_reg: ldo6 {
-				regulator-name = "ldo6_1v3";
-				regulator-min-microvolt = <1250000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-			};
-
-			ldo7_reg: ldo7 {
-				regulator-name = "ldo7_2v75";
-				regulator-min-microvolt = <2700000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-			};
-
-			ldo8_reg: ldo8 {
-				regulator-name = "ldo8_1v8";
-				regulator-min-microvolt = <1750000>;
-				regulator-max-microvolt = <1850000>;
-				regulator-always-on;
-			};
-
-			ldo9_reg: ldo9 {
-				regulator-name = "ldo9_1v5";
-				regulator-min-microvolt = <1450000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-always-on;
-			};
-
-			ldo10_reg: ldo10 {
-				regulator-name = "ldo10_1v3";
-				regulator-min-microvolt = <1250000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&nfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nand>;
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_vbus>;
-	phy_type = "utmi";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts
deleted file mode 100644
index dfa6f64d43cc..000000000000
--- a/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * support for the imx6 based aristainetos2 board
- *
- * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-aristainetos2.dtsi"
-
-/ {
-	model = "aristainetos2 i.MX6 Dual Lite Board 4";
-	compatible = "abb,aristainetos2-imx6dl-4", "fsl,imx6dl";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	display0: disp0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu_disp>;
-
-		port@0 {
-			reg = <0>;
-			display0_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-			display_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
-
-&ecspi1 {
-	lcd_panel: display@0 {
-		compatible = "lg,lg4573";
-		spi-max-frequency = <10000000>;
-		reg = <0>;
-		power-on-delay = <10>;
-
-		display-timings {
-			480x800p57 {
-				native-mode;
-				clock-frequency = <27000027>;
-				hactive = <480>;
-				vactive = <800>;
-				hfront-porch = <10>;
-				hback-porch = <59>;
-				hsync-len = <10>;
-				vback-porch = <15>;
-				vfront-porch = <15>;
-				vsync-len = <15>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-			};
-		};
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&display_out>;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	touch: touch@4b {
-		compatible = "atmel,maxtouch";
-		reg = <0x4b>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <9 8>;
-	};
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&display0_in>;
-};
-
-&iomuxc {
-	pinctrl_ipu_disp: ipudisp1grp {
-		fsl,pins = <
-			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x31
-			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0xE1
-			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
-			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
-			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0xE1
-			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0xE1
-			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0xE1
-			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0xE1
-			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0xE1
-			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0xE1
-			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0xE1
-			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0xE1
-			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0xE1
-			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0xE1
-			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0xE1
-			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0xE1
-			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0xE1
-			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0xE1
-			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0xe1
-			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0xE1
-			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0xE1
-			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0xE1
-			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0xE1
-			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0xE1
-			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0xE1
-			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0xE1
-			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0xE1
-			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0xE1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts b/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts
deleted file mode 100644
index 5e15212eaf3a..000000000000
--- a/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * support for the imx6 based aristainetos2 board
- *
- * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-aristainetos2.dtsi"
-
-/ {
-	model = "aristainetos2 i.MX6 Dual Lite Board 7";
-	compatible = "abb,aristainetos2-imx6dl-7", "fsl,imx6dl";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	panel: panel {
-		compatible = "lg,lb070wv8";
-		backlight = <&backlight>;
-		enable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	touch: touch@4d {
-		compatible = "atmel,maxtouch";
-		reg = <0x4d>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <9 8>;
-	};
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		status = "okay";
-
-		port@0 {
-			reg = <0>;
-			lvds0_in: endpoint {
-				remote-endpoint = <&ipu1_di0_lvds0>;
-			};
-		};
-
-		port@4 {
-			reg = <4>;
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
deleted file mode 100644
index 7da74e6f46d9..000000000000
--- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
+++ /dev/null
@@ -1,261 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-/*
- * Copyright 2014-2020 Toradex
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "imx6dl.dtsi"
-#include "imx6qdl-colibri.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX6DL/S on Colibri Evaluation Board V3";
-	compatible = "toradex,colibri_imx6dl-eval-v3", "toradex,colibri_imx6dl",
-		     "fsl,imx6dl";
-
-	/* Will be filled by the bootloader */
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0>;
-	};
-
-	aliases {
-		i2c0 = &i2c2;
-		i2c1 = &i2c3;
-	};
-
-	aliases {
-		rtc0 = &rtc_i2c;
-		rtc1 = &snvs_rtc;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	/* Fixed crystal dedicated to mcp251x */
-	clk16m: clock-16m {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <16000000>;
-		clock-output-names = "clk16m";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		wakeup {
-			label = "Wake-Up";
-			gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* SODIMM 45 */
-			linux,code = <KEY_WAKEUP>;
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-	};
-
-	lcd_display: disp0 {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interface-pix-fmt = "bgr666";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
-		status = "okay";
-
-		port@0 {
-			reg = <0>;
-
-			lcd_display_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_display_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-	};
-
-	panel: panel {
-		/*
-		 * edt,et057090dhu: EDT 5.7" LCD TFT
-		 * edt,et070080dh6: EDT 7.0" LCD TFT
-		 */
-		compatible = "edt,et057090dhu";
-		backlight = <&backlight>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-};
-
-&backlight {
-	brightness-levels = <0 127 191 223 239 247 251 255>;
-	default-brightness-level = <1>;
-	status = "okay";
-};
-
-/* Colibri SSP */
-&ecspi4 {
-	status = "okay";
-
-	mcp251x0: mcp251x@0 {
-		compatible = "microchip,mcp2515";
-		reg = <0>;
-		clocks = <&clk16m>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <27 0x2>;
-		spi-max-frequency = <10000000>;
-		status = "okay";
-	};
-};
-
-&hdmi {
-	status = "okay";
-};
-
-/*
- * Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board)
- */
-&i2c3 {
-	status = "okay";
-
-	/*
-	 * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>,
-	 * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms
-	 */
-	touchscreen@4a {
-		compatible = "atmel,maxtouch";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pcap_1>;
-		reg = <0x4a>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;		/* SODIMM 28 */
-		reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;	/* SODIMM 30 */
-		status = "disabled";
-	};
-
-	/* M41T0M6 real time clock on carrier board */
-	rtc_i2c: rtc@68 {
-		compatible = "st,m41t0";
-		reg = <0x68>;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&pinctrl_weim_gpio_1 &pinctrl_weim_gpio_2
-		&pinctrl_weim_gpio_3 &pinctrl_weim_gpio_4
-		&pinctrl_weim_gpio_5 &pinctrl_weim_gpio_6
-		&pinctrl_usbh_oc_1 &pinctrl_usbc_id_1
-	>;
-
-	pinctrl_pcap_1: pcap1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x1b0b0 /* SODIMM 28 */
-			MX6QDL_PAD_SD4_DAT2__GPIO2_IO10	0x1b0b0 /* SODIMM 30 */
-		>;
-	};
-
-	pinctrl_mxt_ts: mxttsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_CS1__GPIO2_IO24	0x130b0 /* SODIMM 107 */
-			MX6QDL_PAD_SD2_DAT1__GPIO1_IO14	0x130b0 /* SODIMM 106 */
-		>;
-	};
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&lcd_display_in>;
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&pwm2 {
-	status = "okay";
-};
-
-&pwm3 {
-	status = "okay";
-};
-
-&pwm4 {
-	status = "okay";
-};
-
-&reg_usb_host_vbus {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_host_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	status = "okay";
-};
-
-/* Colibri MMC */
-&usdhc1 {
-	status = "okay";
-};
-
-&weim {
-	status = "okay";
-
-	/* weim memory map: 32MB on CS0, CS1, CS2 and CS3 */
-	ranges = <0 0 0x08000000 0x02000000
-		  1 0 0x0a000000 0x02000000
-		  2 0 0x0c000000 0x02000000
-		  3 0 0x0e000000 0x02000000>;
-
-	/* SRAM on Colibri nEXT_CS0 */
-	sram@0,0 {
-		compatible = "cypress,cy7c1019dv33-10zsxi", "mtd-ram";
-		reg = <0 0 0x00010000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		bank-width = <2>;
-		fsl,weim-cs-timing = <0x00010081 0x00000000 0x04000000
-				      0x00000000 0x04000040 0x00000000>;
-	};
-
-	/* SRAM on Colibri nEXT_CS1 */
-	sram@1,0 {
-		compatible = "cypress,cy7c1019dv33-10zsxi", "mtd-ram";
-		reg = <1 0 0x00010000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		bank-width = <2>;
-		fsl,weim-cs-timing = <0x00010081 0x00000000 0x04000000
-				      0x00000000 0x04000040 0x00000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts
deleted file mode 100644
index 223275f028f1..000000000000
--- a/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts
+++ /dev/null
@@ -1,31 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-/*
- * Copyright 2020 Toradex
- */
-
-/dts-v1/;
-
-#include "imx6dl-colibri-eval-v3.dts"
-#include "imx6qdl-colibri-v1_1-uhs.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX6DL/S V1.1 on Colibri Evaluation Board V3";
-	compatible = "toradex,colibri_imx6dl-v1_1-eval-v3",
-		     "toradex,colibri_imx6dl-v1_1",
-		     "toradex,colibri_imx6dl-eval-v3",
-		     "toradex,colibri_imx6dl",
-		     "fsl,imx6dl";
-};
-
-/* Colibri MMC */
-&usdhc1 {
-	status = "okay";
-	/*
-	 * Please make sure your carrier board does not pull-up any of
-	 * the MMC/SD signals to 3.3 volt before attempting to activate
-	 * UHS-I support.
-	 * To let signaling voltage be changed to 1.8V, please
-	 * delete no-1-8-v property (example below):
-	 * /delete-property/no-1-8-v;
-	 */
-};
diff --git a/arch/arm/boot/dts/imx6dl-gw551x.dts b/arch/arm/boot/dts/imx6dl-gw551x.dts
deleted file mode 100644
index 82d5f85722ea..000000000000
--- a/arch/arm/boot/dts/imx6dl-gw551x.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2014 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-gw551x.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 DualLite/Solo GW551X";
-	compatible = "gw,imx6dl-gw551x", "gw,ventana", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-gw553x.dts b/arch/arm/boot/dts/imx6dl-gw553x.dts
deleted file mode 100644
index 59b8afc36e66..000000000000
--- a/arch/arm/boot/dts/imx6dl-gw553x.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2016 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-gw553x.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 DualLite/Solo GW553X";
-	compatible = "gw,imx6dl-gw553x", "gw,ventana", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-gw560x.dts b/arch/arm/boot/dts/imx6dl-gw560x.dts
deleted file mode 100644
index 21bdfaf8df53..000000000000
--- a/arch/arm/boot/dts/imx6dl-gw560x.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-gw560x.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 DualLite/Solo GW560X";
-	compatible = "gw,imx6dl-gw560x", "gw,ventana", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-gw5903.dts b/arch/arm/boot/dts/imx6dl-gw5903.dts
deleted file mode 100644
index 103261ea9334..000000000000
--- a/arch/arm/boot/dts/imx6dl-gw5903.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-gw5903.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 Duallite/Solo GW5903";
-	compatible = "gw,imx6dl-gw5903", "gw,ventana", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-gw5904.dts b/arch/arm/boot/dts/imx6dl-gw5904.dts
deleted file mode 100644
index 9c6d3cd3d6a7..000000000000
--- a/arch/arm/boot/dts/imx6dl-gw5904.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-gw5904.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 DualLite/Solo GW5904";
-	compatible = "gw,imx6dl-gw5904", "gw,ventana", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-prtvt7.dts b/arch/arm/boot/dts/imx6dl-prtvt7.dts
deleted file mode 100644
index 190d26642bc8..000000000000
--- a/arch/arm/boot/dts/imx6dl-prtvt7.dts
+++ /dev/null
@@ -1,413 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (c) 2016 Protonic Holland
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-prti6q.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/sound/fsl-imx-audmux.h>
-
-/ {
-	model = "Protonic VT7";
-	compatible = "prt,prtvt7", "fsl,imx6dl";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x20000000>;
-	};
-
-	backlight_lcd: backlight-lcd {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 500000 0>;
-		brightness-levels = <0 20 81 248 1000>;
-		default-brightness-level = <20>;
-		num-interpolated-steps = <21>;
-		power-supply = <&reg_bl_12v0>;
-	};
-
-	keys {
-		compatible = "gpio-keys";
-		autorepeat;
-
-		esc {
-			label = "GPIO Key ESC";
-			linux,code = <KEY_ESC>;
-			gpios = <&gpio_pca 0 GPIO_ACTIVE_LOW>;
-		};
-
-		up {
-			label = "GPIO Key UP";
-			linux,code = <KEY_UP>;
-			gpios = <&gpio_pca 1 GPIO_ACTIVE_LOW>;
-		};
-
-		down {
-			label = "GPIO Key DOWN";
-			linux,code = <KEY_DOWN>;
-			gpios = <&gpio_pca 4 GPIO_ACTIVE_LOW>;
-		};
-
-		enter {
-			label = "GPIO Key Enter";
-			linux,code = <KEY_ENTER>;
-			gpios = <&gpio_pca 3 GPIO_ACTIVE_LOW>;
-		};
-
-		cycle {
-			label = "GPIO Key CYCLE";
-			linux,code = <KEY_CYCLEWINDOWS>;
-			gpios = <&gpio_pca 2 GPIO_ACTIVE_LOW>;
-		};
-
-		f1 {
-			label = "GPIO Key F1";
-			linux,code = <KEY_F1>;
-			gpios = <&gpio_pca 14 GPIO_ACTIVE_LOW>;
-		};
-
-		f2 {
-			label = "GPIO Key F2";
-			linux,code = <KEY_F2>;
-			gpios = <&gpio_pca 13 GPIO_ACTIVE_LOW>;
-		};
-
-		f3 {
-			label = "GPIO Key F3";
-			linux,code = <KEY_F3>;
-			gpios = <&gpio_pca 12 GPIO_ACTIVE_LOW>;
-		};
-
-		f4 {
-			label = "GPIO Key F4";
-			linux,code = <KEY_F4>;
-			gpios = <&gpio_pca 11 GPIO_ACTIVE_LOW>;
-		};
-
-		f5 {
-			label = "GPIO Key F5";
-			linux,code = <KEY_F5>;
-			gpios = <&gpio_pca 10 GPIO_ACTIVE_LOW>;
-		};
-
-		f6 {
-			label = "GPIO Key F6";
-			linux,code = <KEY_F6>;
-			gpios = <&gpio_pca 5 GPIO_ACTIVE_LOW>;
-		};
-
-		f7 {
-			label = "GPIO Key F7";
-			linux,code = <KEY_F7>;
-			gpios = <&gpio_pca 6 GPIO_ACTIVE_LOW>;
-		};
-
-		f8 {
-			label = "GPIO Key F8";
-			linux,code = <KEY_F8>;
-			gpios = <&gpio_pca 7 GPIO_ACTIVE_LOW>;
-		};
-
-		f9 {
-			label = "GPIO Key F9";
-			linux,code = <KEY_F9>;
-			gpios = <&gpio_pca 8 GPIO_ACTIVE_LOW>;
-		};
-
-		f10 {
-			label = "GPIO Key F10";
-			linux,code = <KEY_F10>;
-			gpios = <&gpio_pca 9 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_leds>;
-
-		led-debug0 {
-			function = LED_FUNCTION_STATUS;
-			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	reg_bl_12v0: regulator-bl-12v0 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_bl_12v0>;
-		regulator-name = "bl-12v0";
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_1v8: regulator-1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "1v8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "prti6q-sgtl5000";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,widgets =
-			"Microphone", "Microphone Jack",
-			"Line", "Line In Jack",
-			"Headphone", "Headphone Jack",
-			"Speaker", "External Speaker";
-		simple-audio-card,routing =
-			"MIC_IN", "Microphone Jack",
-			"LINE_IN", "Line In Jack",
-			"Headphone Jack", "HP_OUT",
-			"External Speaker", "LINE_OUT";
-
-		simple-audio-card,cpu {
-			sound-dai = <&ssi1>;
-			system-clock-frequency = <0>;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&sgtl5000>;
-			bitclock-master;
-			frame-master;
-		};
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-
-	mux-ssi1 {
-		fsl,audmux-port = <0>;
-		fsl,port-config = <
-			IMX_AUDMUX_V2_PTCR_SYN		0
-			IMX_AUDMUX_V2_PTCR_TFSEL(2)	0
-			IMX_AUDMUX_V2_PTCR_TCSEL(2)	0
-			IMX_AUDMUX_V2_PTCR_TFSDIR	0
-			IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2)
-		>;
-	};
-
-	mux-pins3 {
-		fsl,audmux-port = <2>;
-		fsl,port-config = <
-			IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0)
-			0		       IMX_AUDMUX_V2_PDCR_TXRXEN
-		>;
-	};
-};
-
-&can1 {
-	pinctrl-0 = <&pinctrl_can1 &pinctrl_can1phy>;
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
-};
-
-&ecspi2 {
-	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	status = "okay";
-
-	touchscreen@0 {
-		compatible = "ti,tsc2046";
-		reg = <0>;
-		pinctrl-0 = <&pinctrl_tsc>;
-		pinctrl-names ="default";
-		spi-max-frequency = <100000>;
-		interrupts-extended = <&gpio3 20 IRQ_TYPE_EDGE_FALLING>;
-		pendown-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
-		touchscreen-max-pressure = <4095>;
-		ti,vref-delay-usecs = /bits/ 16 <100>;
-		ti,x-plate-ohms = /bits/ 16 <800>;
-		ti,y-plate-ohms = /bits/ 16 <300>;
-		ti,debounce-max = /bits/ 16 <3>;
-		ti,debounce-tol = /bits/ 16 <70>;
-		ti,debounce-rep = /bits/ 16 <3>;
-		wakeup-source;
-	};
-};
-
-&i2c1 {
-	sgtl5000: audio-codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0xa>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_codec>;
-		#sound-dai-cells = <0>;
-		clocks = <&clks 201>;
-		VDDA-supply = <&reg_3v3>;
-		VDDIO-supply = <&reg_3v3>;
-		VDDD-supply = <&reg_1v8>;
-	};
-};
-
-&i2c3 {
-	rtc@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-
-	gpio_pca: gpio@74 {
-		compatible = "nxp,pca9539";
-		reg = <0x74>;
-		interrupts-extended = <&gpio4 5 IRQ_TYPE_LEVEL_LOW>;
-		#gpio-cells = <2>;
-		gpio-controller;
-	};
-};
-
-&ipu1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ipu1_csi0>;
-	status = "okay";
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&snvs_poweroff {
-	status = "okay";
-};
-
-&snvs_pwrkey {
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&usbh1 {
-	status = "disabled";
-};
-
-&iomuxc {
-	pinctrl_audmux: audmuxgrp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1		0x030b0
-			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
-			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
-			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
-			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
-		>;
-	};
-
-	pinctrl_can1phy: can1phy {
-		fsl,pins = <
-			/* CAN1_SR */
-			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x13070
-			/* CAN1_TERM */
-			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
-		>;
-	};
-
-	pinctrl_codec: codecgrp {
-		fsl,pins = <
-			/* AUDIO_nRESET */
-			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x1f0b0
-		>;
-	};
-
-	pinctrl_ecspi2: ecspi2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_OE__ECSPI2_MISO		0x100b1
-			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK		0x100b1
-			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI		0x100b1
-			MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x000b1
-		>;
-	};
-
-	pinctrl_ipu1_csi0: ipu1csi0grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19	0x1b0b0
-			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0
-			/* ITU656_nRESET */
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
-			/* ITU656_nPDN */
-			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x1b0b0
-		>;
-	};
-
-	pinctrl_ipu1_disp: ipudisp1grp {
-		fsl,pins = <
-			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0xb0
-			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15	   0xb0
-
-			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0xb0
-			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0xb0
-			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0xb0
-			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0xb0
-			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0xb0
-			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0xb0
-			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0xb0
-			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0xb0
-
-			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0xb0
-			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0xb0
-			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0xb0
-			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0xb0
-			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0xb0
-			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0xb0
-			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0xb0
-			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0xb0
-
-			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0xb0
-			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0xb0
-			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0xb0
-			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0xb0
-			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0xb0
-			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0xb0
-			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0xb0
-			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0xb0
-		>;
-	};
-
-	pinctrl_leds: ledsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x1b0b0
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b0
-		>;
-	};
-
-	pinctrl_reg_bl_12v0: 12blgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x1b0b0
-		>;
-	};
-
-	pinctrl_tsc: tscgrp {
-
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x1b0b0
-			MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-qmx6.dtsi b/arch/arm/boot/dts/imx6dl-qmx6.dtsi
deleted file mode 100644
index 150d69858255..000000000000
--- a/arch/arm/boot/dts/imx6dl-qmx6.dtsi
+++ /dev/null
@@ -1,612 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 or MIT
-//
-// Device Tree Source for i.MX6DL based congatec QMX6
-// System on Module
-//
-// Copyright 2018-2021 General Electric Company
-// Copyright 2018-2021 Collabora
-// Copyright 2016 congatec AG
-
-#include "imx6dl.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/sound/fsl-imx-audmux.h>
-
-/ {
-	memory@10000000 {
-		reg = <0x10000000 0x40000000>;
-	};
-
-	reg_3p3v: 3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	i2cmux {
-		compatible = "i2c-mux-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		mux-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>;
-		i2c-parent = <&i2c2>;
-
-		i2c5: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c6: i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-
-	audmux_ssi1 {
-		fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>;
-		fsl,port-config = <
-			(IMX_AUDMUX_V2_PTCR_TFSDIR |
-			IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT6) |
-			IMX_AUDMUX_V2_PTCR_TCLKDIR |
-			IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT6) |
-			IMX_AUDMUX_V2_PTCR_SYN)
-			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT6)
-		>;
-	};
-
-	audmux_aud6 {
-		fsl,audmux-port = <MX51_AUDMUX_PORT6>;
-		fsl,port-config = <
-			IMX_AUDMUX_V2_PTCR_SYN
-			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT1_SSI0)
-		>;
-	};
-};
-
-&clks {
-	clocks = <&rtc_sqw>;
-	clock-names = "ckil";
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL2_PFD0_352M>,
-				 <&clks IMX6QDL_CLK_PLL2_PFD0_352M>;
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1>;
-	status = "okay";
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "sst,sst25vf032b", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-
-		partition@0 {
-			label = "bootloader";
-			reg = <0x0000000 0x100000>;
-		};
-
-		partition@100000 {
-			label = "user";
-			reg = <0x0100000 0x2fc000>;
-		};
-
-		partition@3fc000 {
-			label = "reserved";
-			reg = <0x03fc000 0x4000>;
-			read-only;
-		};
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet &pinctrl_phy_reset>;
-	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
-	fsl,magic-packet;
-	phy-handle = <&phy0>;
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		phy0: ethernet-phy@6 {
-			reg = <6>;
-			qca,clk-out-frequency = <125000000>;
-		};
-	};
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	pinctrl-1 = <&pinctrl_i2c2_gpio>;
-	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	pinctrl-1 = <&pinctrl_i2c3_gpio>;
-	scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-
-	rtc: m41t62@68 {
-		compatible = "st,m41t62";
-		reg = <0x68>;
-
-		rtc_sqw: clock {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-};
-
-&i2c6 {
-	pmic@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <675000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/*
-			 * keep VGEN3, VGEN4 and VGEN5 enabled in order to
-			 * maintain backward compatibility with hw-rev. A.0
-			 */
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <2500000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			/* supply voltage for eMMC */
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&pcie {
-	reset-gpio = <&gpio1 20 0>;
-};
-
-&pwm4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-};
-
-&reg_arm {
-	vin-supply = <&sw1a_reg>;
-};
-
-&reg_pu {
-	vin-supply = <&sw1c_reg>;
-};
-
-&reg_soc {
-	vin-supply = <&sw1c_reg>;
-};
-
-&snvs_poweroff {
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&usbh1 {
-	/* Connected to USB-Hub SMSC USB2514, provides P0, P2, P3, P4 on Qseven connector */
-	vbus-supply = <&reg_5v>;
-	status = "okay";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-};
-
-&usdhc2 {
-	/* MicroSD card slot */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	no-1-8-v;
-	keep-power-in-suspend;
-	wakeup-source;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&usdhc3 {
-	/* eMMC module */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	non-removable;
-	bus-width = <8>;
-	no-1-8-v;
-	keep-power-in-suspend;
-	wakeup-source;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	qmx6mux: imx6qdl-qmx6 {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_DI0_PIN2__AUD6_TXD		0x110b0 /* Q7[67] HDA_SDO */
-				MX6QDL_PAD_DI0_PIN3__AUD6_TXFS		0x30b0 /* Q7[59] HDA_SYNC */
-				MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x30b0 /* Q7[65] HDA_SDI */
-				MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x30b0 /* Q7[63] HDA_BITCLK */
-			>;
-		};
-
-		/* PHY is on System on Module, Q7[3-15] have Ethernet lines */
-		pinctrl_enet: enet {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
-			>;
-		};
-
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000 /* PCIE_WAKE_B */
-				MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09	0x80000000 /* I2C multiplexer */
-				MX6QDL_PAD_NANDF_D6__GPIO2_IO06		0x80000000 /* SD4_CD# */
-				MX6QDL_PAD_NANDF_D7__GPIO2_IO07		0x80000000 /* SD4_WP */
-				MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1		0x80000000 /* Camera MCLK */
-			>;
-		};
-
-		pinctrl_i2c1: i2c1 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1 /* Q7[66] I2C_CLK */
-				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1 /* Q7[68] I2C_DAT */
-			>;
-		};
-
-		pinctrl_i2c1_gpio: i2c1-gpio {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x1b0b0 /* Q7[66] I2C_CLK */
-				MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x1b0b0 /* Q7[68] I2C_DAT */
-			>;
-		};
-
-		pinctrl_i2c2: i2c2 {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1 /* Q7[152] SDVO_CTRL_CLK */
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1 /* Q7[150] SDVO_CTRL_DAT */
-			>;
-		};
-
-		pinctrl_i2c2_gpio: i2c2-gpio {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x1b0b0 /* Q7[152] SDVO_CTRL_CLK */
-				MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x1b0b0 /* Q7[150] SDVO_CTRL_DAT */
-			>;
-		};
-
-		pinctrl_i2c3: i2c3 {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1 /* Q7[60] SMB_CLK */
-				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1 /* Q7[62] SMB_DAT */
-			>;
-		};
-
-		pinctrl_i2c3_gpio: i2c3-gpio {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_3__GPIO1_IO03		0x1b0b0 /* Q7[60] SMB_CLK */
-				MX6QDL_PAD_GPIO_6__GPIO1_IO06		0x1b0b0 /* Q7[62] SMB_DAT */
-			>;
-		};
-
-		pinctrl_phy_reset: phy-reset {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x1b0b0 /* RGMII Phy Reset */
-			>;
-		};
-
-		pinctrl_pwm4: pwm4 {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1 /* Q7[123] LVDS_BLT_CTRL */
-			>;
-		};
-
-		pinctrl_q7_backlight_enable: q7-backlight-enable {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x1b0b0 /* Q7[112] LVDS_BLEN */
-			>;
-		};
-
-		pinctrl_q7_gpio0: q7-gpio0 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b0 /* Q7[185] GPIO0 */
-			>;
-		};
-
-		pinctrl_q7_gpio1: q7-gpio1 {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x1b0b0 /* Q7[186] GPIO1 */
-			>;
-		};
-
-		pinctrl_q7_gpio2: q7-gpio2 {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26	0x1b0b0 /* Q7[187] GPIO2 */
-			>;
-		};
-
-		pinctrl_q7_gpio3: q7-gpio3 {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27	0x1b0b0 /* Q7[188] GPIO3 */
-			>;
-		};
-
-		pinctrl_q7_gpio4: q7-gpio4 {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0 /* Q7[189] GPIO4 */
-			>;
-		};
-
-		pinctrl_q7_gpio5: q7-gpio5 {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0 /* Q7[190] GPIO5 */
-			>;
-		};
-
-		pinctrl_q7_gpio6: q7-gpio6 {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_16__GPIO7_IO11		0x1b0b0 /* Q7[191] GPIO6 */
-			>;
-		};
-
-		pinctrl_q7_gpio7: q7-gpio7 {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0 /* Q7[192] GPIO7 */
-			>;
-		};
-
-		pinctrl_q7_hda_reset: q7-hda-reset {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x1b0b0 /* Q7[61] HDA_RST_N */
-			>;
-		};
-
-		pinctrl_q7_lcd_power: lcd-power {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x1b0b0 /* Q7[111] LVDS_PPEN */
-			>;
-		};
-
-		pinctrl_q7_sdio_power: q7-sdio-power {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30	0x1b0b0 /* Q7[47] SDIO_PWR# */
-			>;
-		};
-
-		pinctrl_q7_sleep_button: q7-sleep-button {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0 /* Q7[21] SLP_BTN# */
-			>;
-		};
-
-		pinctrl_q7_spi_cs1: spi-cs1 {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25	0x1b0b0 /* Q7[202] SPI_CS1# */
-			>;
-		};
-
-		/* SPI1 bus does not leave System on Module */
-		pinctrl_spi1: spi1 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
-				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
-				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
-				MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x1b0b0
-			>;
-		};
-
-		/* Debug connector on Q7 module */
-		pinctrl_uart2: uart2 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart3: uart3 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1 /* Q7[177] UART0_RX */
-				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1 /* Q7[171] UART0_TX */
-			>;
-		};
-
-		pinctrl_usbotg: usbotg {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059 /* Q7[92] USB_ID */
-			>;
-		};
-
-		/* µSD card slot on Q7 module */
-		pinctrl_usdhc2: usdhc2 {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0 /* SD2_CD */
-			>;
-		};
-
-		/* eMMC module on Q7 module */
-		pinctrl_usdhc3: usdhc3 {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
-				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
-				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
-				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4 {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059 /* Q7[45] SDIO_CMD */
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x17059 /* Q7[42] SDIO_CLK */
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059 /* Q7[48] SDIO_DAT1 */
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059 /* Q7[49] SDIO_DAT0 */
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059 /* Q7[50] SDIO_DAT3 */
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059 /* Q7[51] SDIO_DAT2 */
-			>;
-		};
-
-		pinctrl_wdog: wdog {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0 /* Watchdog output signal */
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
deleted file mode 100644
index e7d9bfbfd0e4..000000000000
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ /dev/null
@@ -1,596 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 2014 Iain Paton <ipaton0@gmail.com>
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "RIoTboard i.MX6S";
-	compatible = "riot,imx6s-riotboard", "fsl,imx6dl";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	chosen {
-		stdout-path = "serial1:115200n8";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_led>;
-
-		led0: user1 {
-			label = "user1";
-			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led1: user2 {
-			label = "user2";
-			gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx-audio-sgtl5000";
-		model = "imx6-riotboard-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-			mux-int-port = <1>;
-			mux-ext-port = <3>;
-	};
-
-	reg_2p5v: regulator-2p5v {
-		compatible = "regulator-fixed";
-		regulator-name = "2P5V";
-		regulator-min-microvolt = <2500000>;
-		regulator-max-microvolt = <2500000>;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_usb_otg_vbus: regulator-usbotgvbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&clks {
-	fsl,pmic-stby-poweroff;
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	phy-handle = <&rgmii_phy>;
-	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
-			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
-	fsl,err006687-workaround-present;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* Atheros AR8035 PHY */
-		rgmii_phy: ethernet-phy@4 {
-			reg = <4>;
-			interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
-			reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <10000>;
-			reset-deassert-us = <1000>;
-			qca,smarteee-tw-us-1g = <24>;
-			qca,clk-out-frequency = <125000000>;
-		};
-	};
-};
-
-&gpio1 {
-	gpio-line-names =
-		"", "", "SD2_WP", "", "SD2_CD", "I2C3_SCL",
-			"I2C3_SDA", "I2C4_SCL",
-		"I2C4_SDA", "", "", "", "", "", "", "",
-		"", "PWM3", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&gpio3 {
-	gpio-line-names =
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "USB_OTG_VBUS", "",
-		"UART3_TXD", "UART3_RXD", "", "", "EIM_D28", "", "", "";
-};
-
-&gpio4 {
-	gpio-line-names =
-		"", "", "", "", "", "", "UART4_TXD", "UART4_RXD",
-		"UART5_TXD", "UART5_RXD", "", "", "", "", "", "",
-		"GPIO4_16", "GPIO4_17", "GPIO4_18", "GPIO4_19", "",
-			"CSPI3_CLK", "CSPI3_MOSI", "CSPI3_MISO",
-		"CSPI3_CS0", "CSPI3_CS1", "GPIO4_26", "GPIO4_27",
-			"CSPI3_RDY", "PWM1", "PWM2", "GPIO4_31";
-};
-
-&gpio5 {
-	gpio-line-names =
-		"", "", "EIM_A25", "", "", "GPIO5_05", "GPIO5_06",
-			"GPIO5_07",
-		"GPIO5_08", "CSPI2_CS1", "CSPI2_MOSI", "CSPI2_MISO",
-			"CSPI2_CS0", "CSPI2_CLK", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&gpio7 {
-	gpio-line-names =
-		"SD3_CD", "SD3_WP", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	codec: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-
-	pmic: pf0100@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <16 8>;
-		fsl,pmic-stby-poweroff;
-
-		regulators {
-			reg_vddcore: sw1ab {				/* VDDARM_IN */
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-always-on;
-			};
-
-			reg_vddsoc: sw1c {				/* VDDSOC_IN */
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-always-on;
-			};
-
-			reg_gen_3v3: sw2 {				/* VDDHIGH_IN */
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			reg_ddr_1v5a: sw3a {				/* NVCC_DRAM, NVCC_RGMII */
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-always-on;
-			};
-
-			reg_ddr_1v5b: sw3b {				/* NVCC_DRAM, NVCC_RGMII */
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-always-on;
-			};
-
-			reg_ddr_vtt: sw4 {				/* MIPI conn */
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-always-on;
-			};
-
-			reg_5v_600mA: swbst {				/* not used */
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			reg_snvs_3v: vsnvs {				/* VDD_SNVS_IN */
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {				/* VREF_DDR */
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			reg_vgen1_1v5: vgen1 {				/* not used */
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			reg_vgen2_1v2_eth: vgen2 {			/* pcie ? */
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-always-on;
-			};
-
-			reg_vgen3_2v8: vgen3 {				/* not used */
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-			reg_vgen4_1v8: vgen4 {				/* NVCC_SD3 */
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			reg_vgen5_2v5_sgtl: vgen5 {			/* Pwr LED & 5V0_delayed enable */
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			reg_vgen6_3v3: vgen6 {				/* #V#_DELAYED enable, MIPI */
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&i2c4 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c4>;
-	clocks = <&clks 116>;
-	status = "okay";
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>;
-	status = "okay";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&pwm4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbh1 {
-	dr_mode = "host";
-	disable-over-current;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	vmmc-supply = <&reg_3p3v>;
-	non-removable;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-
-	imx6-riotboard {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
-				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
-				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
-				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0		/* CAM_MCLK */
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
-				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
-				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
-				MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x000b1		/* CS0 */
-			>;
-		};
-
-		pinctrl_ecspi2: ecspi2grp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09	0x000b1		/* CS1 */
-				MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI	0x100b1
-				MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO	0x100b1
-				MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x000b1		/* CS0 */
-				MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK	0x100b1
-			>;
-		};
-
-		pinctrl_ecspi3: ecspi3grp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
-				MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
-				MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
-				MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x000b1		/* CS0 */
-				MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25	0x000b1		/* CS1 */
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x0a0b1		/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030		/* AR8035 pin strapping: IO voltage: pull up */
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030		/* AR8035 pin strapping: PHYADDR#0: pull down */
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030		/* AR8035 pin strapping: PHYADDR#1: pull down */
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030		/* AR8035 pin strapping: MODE#1: pull up */
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030		/* AR8035 pin strapping: MODE#3: pull up */
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x130b0		/* AR8035 pin strapping: MODE#0: pull down */
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8	/* GPIO16 -> AR8035 25MHz */
-				MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x130b0		/* RGMII_nRST */
-				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x180b0		/* AR8035 interrupt */
-				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
-				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c4: i2c4grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_7__I2C4_SCL             0x4001b8b1
-				MX6QDL_PAD_GPIO_8__I2C4_SDA             0x4001b8b1
-			>;
-		};
-
-		pinctrl_led: ledgrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b1	/* user led0 */
-				MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x1b0b1	/* user led1 */
-			>;
-		};
-
-		pinctrl_pwm1: pwm1grp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT8__PWM1_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm2: pwm2grp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT9__PWM2_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm3: pwm3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm4: pwm4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart4: uart4grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
-				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart5: uart5grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
-				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x000b0	/* MX6QDL_PAD_EIM_D22__USB_OTG_PWR */
-				MX6QDL_PAD_EIM_D21__USB_OTG_OC		0x1b0b0
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0	/* SD2 CD */
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1f0b0	/* SD2 WP */
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0	/* SD3 CD */
-				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1f0b0	/* SD3 WP */
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-				MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x17059	/* SD4 RST (eMMC) */
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts
deleted file mode 100644
index 51a9bb9d6bc2..000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lcd.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6DL Module on CoMpact TFT";
-	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
-};
-
-&backlight {
-	pwms = <&pwm2 0 500000 0>;
-	/delete-property/ turn-on-delay-ms;
-};
-
-&can1 {
-	status = "disabled";
-};
-
-&can2 {
-	xceiver-supply = <&reg_3v3>;
-};
-
-&kpp {
-	status = "disabled";
-};
-
-&lcd_panel {
-	compatible = "edt,etm0700g0edh6";
-};
-
-&reg_can_xcvr {
-	status = "disabled";
-};
-
-&touchscreen {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8034-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6s-8034-mb7.dts
deleted file mode 100644
index fc23b4d291a1..000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6s-8034-mb7.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl-tx6s-8034.dts"
-#include "imx6qdl-tx6-mb7.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6S-8034 Module on MB7 baseboard";
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8034.dts b/arch/arm/boot/dts/imx6dl-tx6s-8034.dts
deleted file mode 100644
index 9eb2ef17339c..000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6s-8034.dts
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * Copyright 2015-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lcd.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6S-8034 Module";
-	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
-
-	cpus {
-		/delete-node/ cpu@1;
-	};
-};
-
-&ds1339 {
-	status = "disabled";
-};
-
-&pinctrl_usdhc1 {
-	fsl,pins = <
-		MX6QDL_PAD_SD1_CMD__SD1_CMD		0x070b1
-		MX6QDL_PAD_SD1_CLK__SD1_CLK		0x070b1
-		MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x070b1
-		MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x070b1
-		MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x070b1
-		MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x070b1
-		MX6QDL_PAD_SD3_CMD__GPIO7_IO02		0x170b0 /* SD1 CD */
-	>;
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8035-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6s-8035-mb7.dts
deleted file mode 100644
index 4101c6597721..000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6s-8035-mb7.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl-tx6s-8035.dts"
-#include "imx6qdl-tx6-mb7.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6U-8035 Module on MB7 baseboard";
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8035.dts b/arch/arm/boot/dts/imx6dl-tx6s-8035.dts
deleted file mode 100644
index a5532ecc18c5..000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6s-8035.dts
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * Copyright 2015-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lcd.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6S-8035 Module";
-	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
-
-	cpus {
-		/delete-node/ cpu@1;
-	};
-};
-
-&ds1339 {
-	status = "disabled";
-};
-
-&gpmi {
-	status = "disabled";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <4>;
-	non-removable;
-	no-1-8-v;
-	fsl,wp-controller;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_usdhc4: usdhc4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
-			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
-			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-801x.dts b/arch/arm/boot/dts/imx6dl-tx6u-801x.dts
deleted file mode 100644
index 67ed0452f5de..000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6u-801x.dts
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lcd.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6U-801x Module";
-	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-8033-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6u-8033-mb7.dts
deleted file mode 100644
index d34189fc52d9..000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6u-8033-mb7.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl-tx6u-8033.dts"
-#include "imx6qdl-tx6-mb7.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6U-8033 Module on MB7 baseboard";
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-8033.dts b/arch/arm/boot/dts/imx6dl-tx6u-8033.dts
deleted file mode 100644
index 7030b2654bbd..000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6u-8033.dts
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lcd.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6U-8033 Module";
-	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
-};
-
-&ds1339 {
-	status = "disabled";
-};
-
-&gpmi {
-	status = "disabled";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <4>;
-	non-removable;
-	no-1-8-v;
-	fsl,wp-controller;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_usdhc4: usdhc4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
-			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
-			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-80xx-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6u-80xx-mb7.dts
deleted file mode 100644
index aef5fcc42904..000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6u-80xx-mb7.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl-tx6u-801x.dts"
-#include "imx6qdl-tx6-mb7.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6U-8030/-8010/-8012 Module on MB7 baseboard";
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts
deleted file mode 100644
index 5342f2f5a8a8..000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lvds.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6U-811x Module";
-	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts
deleted file mode 100644
index c4588fb0bf6f..000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright 2016-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl-tx6u-811x.dts"
-#include "imx6qdl-tx6-mb7.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6U-8130/-8110 Module on MB7 baseboard";
-};
diff --git a/arch/arm/boot/dts/imx6dl-victgo.dts b/arch/arm/boot/dts/imx6dl-victgo.dts
deleted file mode 100644
index d37ba4ed847d..000000000000
--- a/arch/arm/boot/dts/imx6dl-victgo.dts
+++ /dev/null
@@ -1,852 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (c) 2016 Protonic Holland
- * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
- */
-
-/dts-v1/;
-#include <dt-bindings/display/sdtv-standards.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/media/tvp5150.h>
-#include <dt-bindings/sound/fsl-imx-audmux.h>
-#include "imx6dl.dtsi"
-
-/ {
-	model = "Kverneland TGO";
-	compatible = "kvg,victgo", "fsl,imx6dl";
-
-	chosen {
-		stdout-path = &uart4;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_backlight>;
-		pwms = <&pwm1 0 5000000 0>;
-		brightness-levels = <0 16 64 255>;
-		num-interpolated-steps = <16>;
-		default-brightness-level = <1>;
-		power-supply = <&reg_3v3>;
-		enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
-	};
-
-	connector {
-		compatible = "composite-video-connector";
-		label = "Composite0";
-		sdtv-standards = <SDTV_STD_PAL_B>;
-
-		port {
-			comp0_out: endpoint {
-				remote-endpoint = <&tvp5150_comp0_in>;
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpiokeys>;
-		autorepeat;
-
-		power {
-			label = "Power Button";
-			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-
-		enter {
-			label = "Rotary Key";
-			gpios = <&gpio2 05 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_ENTER>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_leds>;
-
-		led-0 {
-			label = "debug0";
-			function = LED_FUNCTION_HEARTBEAT;
-			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		led-1 {
-			label = "debug1";
-			function = LED_FUNCTION_DISK;
-			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "disk-activity";
-		};
-
-		led-2 {
-			label = "power_led";
-			function = LED_FUNCTION_POWER;
-			gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-	};
-
-	panel {
-		compatible = "kyo,tcg121xglp";
-		backlight = <&backlight>;
-		power-supply = <&reg_3v3>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-
-	clk50m_phy: phy-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <50000000>;
-	};
-
-	reg_1v8: regulator-1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "1v8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	reg_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_h1_vbus: regulator-h1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "h1-vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_otg_vbus: regulator-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "otg-vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	rotary-encoder {
-		compatible = "rotary-encoder";
-		pinctrl-0 = <&pinctrl_rotary_ch>;
-		gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>,
-			<&gpio2 4 GPIO_ACTIVE_HIGH>;
-		linux,axis = <REL_WHEEL>;
-		rotary-encoder,steps-per-period = <4>;
-		rotary-encoder,relative-axis;
-		rotary-encoder,rollover;
-		wakeup-source;
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "prti6q-sgtl5000";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,widgets =
-			"Microphone", "Microphone Jack",
-			"Line", "Line In Jack",
-			"Headphone", "Headphone Jack",
-			"Speaker", "External Speaker";
-		simple-audio-card,routing =
-			"MIC_IN", "Microphone Jack",
-			"LINE_IN", "Line In Jack",
-			"Headphone Jack", "HP_OUT",
-			"External Speaker", "LINE_OUT";
-
-		simple-audio-card,cpu {
-			sound-dai = <&ssi1>;
-			system-clock-frequency = <0>;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&codec>;
-			bitclock-master;
-			frame-master;
-		};
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-
-	mux-ssi1 {
-		fsl,audmux-port = <0>;
-		fsl,port-config = <
-			IMX_AUDMUX_V2_PTCR_SYN		0
-			IMX_AUDMUX_V2_PTCR_TFSEL(2)	0
-			IMX_AUDMUX_V2_PTCR_TCSEL(2)	0
-			IMX_AUDMUX_V2_PTCR_TFSDIR	0
-			IMX_AUDMUX_V2_PTCR_TCLKDIR	IMX_AUDMUX_V2_PDCR_RXDSEL(2)
-		>;
-	};
-
-	mux-pins3 {
-		fsl,audmux-port = <2>;
-		fsl,port-config = <
-			IMX_AUDMUX_V2_PTCR_SYN		IMX_AUDMUX_V2_PDCR_RXDSEL(0)
-			0				IMX_AUDMUX_V2_PDCR_TXRXEN
-		>;
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can2>;
-	status = "okay";
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <20000000>;
-	};
-};
-
-&ecspi2 {
-	cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	status = "okay";
-
-	touchscreen@0 {
-		compatible = "ti,tsc2046";
-		reg = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_touchscreen>;
-		spi-max-frequency = <200000>;
-		interrupts-extended = <&gpio5 8 IRQ_TYPE_EDGE_FALLING>;
-		pendown-gpio = <&gpio5 8 GPIO_ACTIVE_LOW>;
-		touchscreen-size-x = <800>;
-		touchscreen-size-y = <480>;
-		touchscreen-inverted-y;
-		touchscreen-max-pressure = <4095>;
-		ti,vref-delay-usecs = /bits/ 16 <100>;
-		ti,x-plate-ohms = /bits/ 16 <800>;
-		ti,y-plate-ohms = /bits/ 16 <300>;
-		wakeup-source;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rmii";
-	clocks = <&clks IMX6QDL_CLK_ENET>,
-		 <&clks IMX6QDL_CLK_ENET>,
-		 <&clk50m_phy>;
-	clock-names = "ipg", "ahb", "ptp";
-	phy-handle = <&rmii_phy>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* Microchip KSZ8081RNA PHY */
-		rmii_phy: ethernet-phy@0 {
-			reg = <0>;
-			interrupts-extended = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>;
-			reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <10000>;
-			reset-deassert-us = <300>;
-		};
-	};
-};
-
-&gpio1 {
-	gpio-line-names =
-		"CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR",
-			"CAM2_MIRROR", "", "", "SMBALERT",
-		"DEBUG_0", "DEBUG_1", "", "", "", "", "", "",
-		"SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK",
-			"SD1_DATA3", "", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&gpio2 {
-	gpio-line-names =
-		"", "", "", "", "", "", "", "",
-		"REV_ID0", "REV_ID1", "REV_ID2", "REV_ID3", "REV_ID4",
-			"BOARD_ID0", "BOARD_ID1", "BOARD_ID2",
-		"", "", "", "", "", "", "ISB_IN1", "ON_SWITCH",
-		"POWER_LED", "", "", "", "", "", "", "";
-};
-
-&gpio3 {
-	gpio-line-names =
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"ECSPI1_SCLK", "ECSPI1_MISO", "ECSPI1_MOSI", "ECSPI1_SS1",
-			"CPU_ON1_FB", "USB_EXT1_OC", "USB_EXT1_PWR", "YACO_IRQ",
-		"TSS_TXD", "TSS_RXD", "", "", "", "", "YACO_BOOT0",
-			"YACO_RESET";
-};
-
-&gpio4 {
-	gpio-line-names =
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "CAN1_SR", "CAN2_SR", "CAN2_TX", "CAN2_RX",
-		"", "", "DIP1_FB", "", "VCAM_EN", "", "", "",
-		"CPU_LIGHT_ON", "", "ETH_RESET", "CPU_CONTACT_IN", "BL_EN",
-			"BL_PWM", "ETH_INTRP", "ISB_LED";
-};
-
-&gpio5 {
-	gpio-line-names =
-		"", "", "", "", "", "", "", "",
-		"TSC_PENIRQ", "TSC_BUSY", "ECSPI2_MOSI", "ECSPI2_MISO",
-			"ECSPI2_SS0", "ECSPI2_SCLK", "", "",
-		"", "", "", "", "", "", "", "",
-		"I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX",
-			"YACO_AUX_TX", "ITU656_D0", "ITU656_D1";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	codec: audio-codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0xa>;
-		#sound-dai-cells = <0>;
-		clocks = <&clks 201>;
-		VDDA-supply = <&reg_3v3>;
-		VDDIO-supply = <&reg_3v3>;
-		VDDD-supply = <&reg_1v8>;
-	};
-
-	video-decoder@5c {
-		compatible = "ti,tvp5150";
-		reg = <0x5c>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-
-			tvp5150_comp0_in: endpoint {
-				remote-endpoint = <&comp0_out>;
-			};
-		};
-
-		/* Output port 2 is video output pad */
-		port@2 {
-			reg = <2>;
-
-			tvp5151_to_ipu1_csi0_mux: endpoint {
-				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
-			};
-		};
-	};
-
-	keypad@70 {
-		compatible = "holtek,ht16k33";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_keypad>;
-		reg = <0x70>;
-		refresh-rate-hz = <20>;
-		debounce-delay-ms = <50>;
-		interrupts-extended = <&gpio4 5 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
-		keypad,num-rows = <12>;
-		keypad,num-columns = <3>;
-		linux,keymap = <
-			MATRIX_KEY(2, 0, KEY_F6)
-			MATRIX_KEY(3, 0, KEY_F8)
-			MATRIX_KEY(4, 0, KEY_F10)
-			MATRIX_KEY(5, 0, KEY_F4)
-			MATRIX_KEY(6, 0, KEY_F2)
-			MATRIX_KEY(2, 1, KEY_F5)
-			MATRIX_KEY(3, 1, KEY_F7)
-			MATRIX_KEY(4, 1, KEY_F9)
-			MATRIX_KEY(5, 1, KEY_F3)
-			MATRIX_KEY(6, 1, KEY_F1)
-		      >;
-	};
-
-	/* additional i2c devices are added automatically by the boot loader */
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	adc@49 {
-		compatible = "ti,ads1015";
-		reg = <0x49>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		channel@4 {
-			reg = <4>;
-			ti,gain = <3>;
-			ti,datarate = <3>;
-		};
-
-		channel@5 {
-			reg = <5>;
-			ti,gain = <3>;
-			ti,datarate = <3>;
-		};
-
-		channel@6 {
-			reg = <6>;
-			ti,gain = <3>;
-			ti,datarate = <3>;
-		};
-
-		channel@7 {
-			reg = <7>;
-			ti,gain = <3>;
-			ti,datarate = <3>;
-		};
-	};
-
-	rtc@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-
-	temperature-sensor@70 {
-		compatible = "ti,tmp103";
-		reg = <0x70>;
-	};
-};
-
-&ipu1_csi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ipu1_csi0>;
-	status = "okay";
-};
-
-&ipu1_csi0_mux_from_parallel_sensor {
-	remote-endpoint = <&tvp5151_to_ipu1_csi0_mux>;
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&ssi1 {
-	#sound-dai-cells = <0>;
-	fsl,mode = "ac97-slave";
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_h1_vbus>;
-	pinctrl-names = "default";
-	phy_type = "utmi";
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	phy_type = "utmi";
-	dr_mode = "host";
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-	no-1-8-v;
-	disable-wp;
-	cap-sd-highspeed;
-	no-mmc;
-	no-sdio;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	bus-width = <8>;
-	no-1-8-v;
-	non-removable;
-	no-sd;
-	no-sdio;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	pinctrl_audmux: audmuxgrp {
-		fsl,pins = <
-			/* SGTL5000 sys_mclk */
-			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1			0x030b0
-			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD			0x130b0
-			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC			0x130b0
-			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD			0x110b0
-			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS			0x130b0
-		>;
-	};
-
-	pinctrl_backlight: backlightgrp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28		0x1b0b0
-		>;
-	};
-
-	pinctrl_can1: can1grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX		0x1b000
-			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX		0x3008
-			/* CAN1_SR */
-			MX6QDL_PAD_KEY_COL3__GPIO4_IO12			0x13008
-			/* CAN1_TERM */
-			MX6QDL_PAD_GPIO_0__GPIO1_IO00			0x1b088
-		>;
-	};
-
-	pinctrl_can2: can2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX		0x1b000
-			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX		0x3008
-			/* CAN2_SR */
-			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13			0x13008
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D17__ECSPI1_MISO			0x100b1
-			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI			0x100b1
-			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK			0x100b1
-			/* CS */
-			MX6QDL_PAD_EIM_D19__GPIO3_IO19			0x000b1
-		>;
-	};
-
-	pinctrl_ecspi2: ecspi2grp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI		0x100b1
-			MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO		0x100b1
-			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12		0x100b1
-			MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK		0x100b1
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			/* MX6QDL_ENET_PINGRP4 */
-			MX6QDL_PAD_ENET_MDC__ENET_MDC			0x1b0b0
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO			0x1b0b0
-			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0		0x1b0b0
-			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1		0x1b0b0
-			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER		0x1b0b0
-			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN		0x1b0b0
-			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0		0x1b0b0
-			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1		0x1b0b0
-			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN		0x1b0b0
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK		0x1b0b0
-			/* Phy reset */
-			MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26		0x1b0b0
-			/* nINTRP */
-			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30		0x1b0b0
-		>;
-	};
-
-	pinctrl_gpiokeys: gpiokeygrp {
-		fsl,pins = <
-			/* ROTARY_BTN */
-			MX6QDL_PAD_NANDF_D5__GPIO2_IO05			0x1b0b0
-			/* nON_SWITCH */
-			MX6QDL_PAD_EIM_CS0__GPIO2_IO23			0x1b0b0
-		>;
-	};
-
-	pinctrl_hog: hoggrp {
-		fsl,pins = <
-			/* ITU656_nRESET */
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02			0x1b0b0
-			/* CAM1_MIRROR */
-			MX6QDL_PAD_GPIO_3__GPIO1_IO03			0x130b0
-			/* CAM2_MIRROR */
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04			0x130b0
-			/* CAM_nDETECT */
-			MX6QDL_PAD_GPIO_17__GPIO7_IO12			0x1b0b0
-			/* ISB_IN1 */
-			MX6QDL_PAD_EIM_A16__GPIO2_IO22			0x130b0
-			/* ISB_nIN2 */
-			MX6QDL_PAD_EIM_A17__GPIO2_IO21			0x1b0b0
-			/* WARN_LIGHT */
-			MX6QDL_PAD_EIM_A19__GPIO2_IO19			0x100b0
-			/* ON2_FB */
-			MX6QDL_PAD_EIM_A25__GPIO5_IO02			0x100b0
-			/* YACO_nIRQ */
-			MX6QDL_PAD_EIM_D23__GPIO3_IO23			0x1b0b0
-			/* YACO_BOOT0 */
-			MX6QDL_PAD_EIM_D30__GPIO3_IO30			0x130b0
-			/* YACO_nRESET */
-			MX6QDL_PAD_EIM_D31__GPIO3_IO31			0x1b0b0
-			/* FORCE_ON1 */
-			MX6QDL_PAD_EIM_EB2__GPIO2_IO30			0x1b0b0
-			/* AUDIO_nRESET */
-			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21		0x1f0b0
-			/* ITU656_nPDN */
-			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20		0x1b0b0
-
-			/* HW revision detect */
-			/* REV_ID0 */
-			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08			0x1b0b0
-			/* REV_ID1 is shared with PWM3 */
-			/* REV_ID2 */
-			MX6QDL_PAD_SD4_DAT2__GPIO2_IO10			0x1b0b0
-			/* REV_ID3 */
-			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11			0x1b0b0
-			/* REV_ID4 */
-			MX6QDL_PAD_SD4_DAT4__GPIO2_IO12			0x1b0b0
-
-			/* New in HW revision 1 */
-			/* ON1_FB */
-			MX6QDL_PAD_EIM_D20__GPIO3_IO20			0x100b0
-			/* DIP1_FB */
-			MX6QDL_PAD_DI0_PIN2__GPIO4_IO18			0x1b0b0
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001f8b1
-			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001f8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_ipu1_csi0: ipu1csi0grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19		0x1b0b0
-			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK	0x1b0b0
-		>;
-	};
-
-	pinctrl_keypad: keypadgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_19__GPIO4_IO05			0x1b0b0
-		>;
-	};
-
-	pinctrl_leds: ledsgrp {
-		fsl,pins = <
-			/* DEBUG0 */
-			MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16		0x1b0b0
-			/* DEBUG1 */
-			MX6QDL_PAD_DI0_PIN15__GPIO4_IO17		0x1b0b0
-			/* POWER_LED */
-			MX6QDL_PAD_EIM_CS1__GPIO2_IO24			0x1b0b0
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT8__PWM1_OUT			0x1b0b0
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT1__PWM3_OUT			0x1b0b0
-		>;
-	};
-
-	pinctrl_rotary_ch: rotarychgrp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_D3__GPIO2_IO03			0x1b0b0
-			MX6QDL_PAD_NANDF_D4__GPIO2_IO04			0x1b0b0
-		>;
-	};
-
-	pinctrl_touchscreen: touchscreengrp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08		0x1b0b0
-			MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09		0x1b0b0
-		>;
-	};
-
-	/* YaCO AUX Uart */
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA		0x1b0b1
-			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D26__UART2_TX_DATA		0x1b0b1
-			MX6QDL_PAD_EIM_D27__UART2_RX_DATA		0x1b0b1
-		>;
-	};
-
-	/* YaCO Touchscreen UART */
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D24__UART3_TX_DATA		0x1b0b1
-			MX6QDL_PAD_EIM_D25__UART3_RX_DATA		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA		0x1b0b1
-			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA		0x1b0b1
-			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA		0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__USB_OTG_OC			0x1b0b0
-			/* power enable, high active */
-			MX6QDL_PAD_EIM_D22__GPIO3_IO22			0x1b0b0
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD			0x170f9
-			MX6QDL_PAD_SD1_CLK__SD1_CLK			0x100f9
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0			0x170f9
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1			0x170f9
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2			0x170f9
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3			0x170f9
-			MX6QDL_PAD_GPIO_1__GPIO1_IO01			0x1b0b0
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD			0x17099
-			MX6QDL_PAD_SD3_CLK__SD3_CLK			0x10099
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0			0x17099
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1			0x17099
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2			0x17099
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3			0x17099
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4			0x17099
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5			0x17099
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6			0x17099
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7			0x17099
-			MX6QDL_PAD_SD3_RST__SD3_RESET			0x1b0b1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-apalis-eval.dts b/arch/arm/boot/dts/imx6q-apalis-eval.dts
deleted file mode 100644
index a0683b4aeca1..000000000000
--- a/arch/arm/boot/dts/imx6q-apalis-eval.dts
+++ /dev/null
@@ -1,273 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-/*
- * Copyright 2014-2020 Toradex
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "imx6q.dtsi"
-#include "imx6qdl-apalis.dtsi"
-
-/ {
-	model = "Toradex Apalis iMX6Q/D Module on Apalis Evaluation Board";
-	compatible = "toradex,apalis_imx6q-eval", "toradex,apalis_imx6q",
-		     "fsl,imx6q";
-
-	aliases {
-		i2c0 = &i2c1;
-		i2c1 = &i2c3;
-		i2c2 = &i2c2;
-		rtc0 = &rtc_i2c;
-		rtc1 = &snvs_rtc;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		wakeup {
-			label = "Wake-Up";
-			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WAKEUP>;
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-	};
-
-	lcd_display: disp0 {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
-		status = "okay";
-
-		port@0 {
-			reg = <0>;
-
-			lcd_display_in: endpoint {
-				remote-endpoint = <&ipu1_di1_disp1>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_display_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-	};
-
-	panel: panel {
-		/*
-		 * edt,et057090dhu: EDT 5.7" LCD TFT
-		 * edt,et070080dh6: EDT 7.0" LCD TFT
-		 */
-		compatible = "edt,et057090dhu";
-		backlight = <&backlight>;
-		power-supply = <&reg_3v3_sw>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-
-	reg_pcie_switch: regulator-pcie-switch {
-		compatible = "regulator-fixed";
-		regulator-name = "pcie_switch";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-		startup-delay-us = <100000>;
-		enable-active-high;
-		status = "okay";
-	};
-
-	reg_3v3_sw: regulator-3v3-sw {
-		compatible = "regulator-fixed";
-		regulator-name = "3.3V_SW";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-};
-
-&backlight {
-	brightness-levels = <0 127 191 223 239 247 251 255>;
-	default-brightness-level = <1>;
-	power-supply = <&reg_3v3_sw>;
-	status = "okay";
-};
-
-&can1 {
-	xceiver-supply = <&reg_3v3_sw>;
-	status = "okay";
-};
-
-&can2 {
-	xceiver-supply = <&reg_3v3_sw>;
-	status = "okay";
-};
-
-&hdmi {
-	status = "okay";
-};
-
-/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
-&i2c1 {
-	status = "okay";
-
-	/*
-	 * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>,
-	 * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms
-	 */
-	touchscreen@4a {
-		compatible = "atmel,maxtouch";
-		reg = <0x4a>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>; /* SODIMM 13 */
-		status = "disabled";
-	};
-
-	pcie-switch@58 {
-		compatible = "plx,pex8605";
-		reg = <0x58>;
-	};
-
-	/* M41T0M6 real time clock on carrier board */
-	rtc_i2c: rtc@68 {
-		compatible = "st,m41t0";
-		reg = <0x68>;
-	};
-};
-
-/*
- * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
- * board)
- */
-&i2c3 {
-	status = "okay";
-};
-
-&ipu1_di1_disp1 {
-	remote-endpoint = <&lcd_display_in>;
-};
-
-&ldb {
-	status = "okay";
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_reset_moci>;
-	/* active-high meaning opposite of regular PERST# active-low polarity */
-	reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-	reset-gpio-active-high;
-	vpcie-supply = <&reg_pcie_switch>;
-	status = "okay";
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&pwm2 {
-	status = "okay";
-};
-
-&pwm3 {
-	status = "okay";
-};
-
-&pwm4 {
-	status = "okay";
-};
-
-&reg_usb_otg_vbus {
-	status = "okay";
-};
-
-&reg_usb_host_vbus {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&sound_spdif {
-	status = "okay";
-};
-
-&spdif {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart4 {
-	status = "okay";
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_host_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	status = "okay";
-};
-
-/* MMC1 */
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_usdhc1_8bit &pinctrl_mmc_cd>;
-	cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-/* SD1 */
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>;
-	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&iomuxc {
-	/*
-	 * Mux the Apalis GPIOs
-	 */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2
-		     &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4
-		     &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6
-		     &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8
-		    >;
-};
diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
deleted file mode 100644
index 86e84781cf5d..000000000000
--- a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
+++ /dev/null
@@ -1,274 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-/*
- * Copyright 2014-2020 Toradex
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "imx6q.dtsi"
-#include "imx6qdl-apalis.dtsi"
-
-/ {
-	model = "Toradex Apalis iMX6Q/D Module on Ixora Carrier Board V1.1";
-	compatible = "toradex,apalis_imx6q-ixora-v1.1",
-		     "toradex,apalis_imx6q-ixora", "toradex,apalis_imx6q",
-		     "fsl,imx6q";
-
-	aliases {
-		i2c0 = &i2c1;
-		i2c1 = &i2c3;
-		i2c2 = &i2c2;
-		rtc0 = &rtc_i2c;
-		rtc1 = &snvs_rtc;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		wakeup {
-			label = "Wake-Up";
-			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WAKEUP>;
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-	};
-
-	lcd_display: disp0 {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
-		status = "okay";
-
-		port@0 {
-			reg = <0>;
-
-			lcd_display_in: endpoint {
-				remote-endpoint = <&ipu1_di1_disp1>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_display_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-	};
-
-	panel: panel {
-		/*
-		 * edt,et057090dhu: EDT 5.7" LCD TFT
-		 * edt,et070080dh6: EDT 7.0" LCD TFT
-		 */
-		compatible = "edt,et057090dhu";
-		backlight = <&backlight>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_leds_ixora>;
-
-		led4-green {
-			label = "LED_4_GREEN";
-			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
-		};
-
-		led4-red {
-			label = "LED_4_RED";
-			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-		};
-
-		led5-green {
-			label = "LED_5_GREEN";
-			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
-		};
-
-		led5-red {
-			label = "LED_5_RED";
-			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&backlight {
-	brightness-levels = <0 127 191 223 239 247 251 255>;
-	default-brightness-level = <1>;
-	status = "okay";
-};
-
-&can1 {
-	status = "okay";
-};
-
-&can2 {
-	status = "okay";
-};
-
-&hdmi {
-	status = "okay";
-};
-
-/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
-&i2c1 {
-	status = "okay";
-
-	/*
-	 * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>,
-	 * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms
-	 */
-	touchscreen@4a {
-		compatible = "atmel,maxtouch";
-		reg = <0x4a>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>; /* SODIMM 13 */
-		status = "disabled";
-	};
-
-	/* M41T0M6 real time clock on carrier board */
-	rtc_i2c: rtc@68 {
-		compatible = "st,m41t0";
-		reg = <0x68>;
-	};
-};
-
-/*
- * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
- * board)
- */
-&i2c3 {
-	status = "okay";
-};
-
-&ipu1_di1_disp1 {
-	remote-endpoint = <&lcd_display_in>;
-};
-
-&ldb {
-	status = "okay";
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_reset_moci>;
-	/* active-high meaning opposite of regular PERST# active-low polarity */
-	reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-	reset-gpio-active-high;
-	status = "okay";
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&pwm2 {
-	status = "okay";
-};
-
-&pwm3 {
-	status = "okay";
-};
-
-&pwm4 {
-	status = "okay";
-};
-
-&reg_usb_otg_vbus {
-	status = "okay";
-};
-
-&reg_usb_host_vbus {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&sound_spdif {
-	status = "okay";
-};
-
-&spdif {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart4 {
-	status = "okay";
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_host_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	status = "okay";
-};
-
-/* MMC1 */
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_mmc_cd>;
-	cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&iomuxc {
-	/*
-	 * Mux the Apalis GPIOs
-	 */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2
-		     &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4
-		     &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6
-		     &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8
-		    >;
-
-	pinctrl_leds_ixora: ledsixoragrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x1b0b0
-			MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x1b0b0
-			MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
-			MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
deleted file mode 100644
index 62e72773e53b..000000000000
--- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts
+++ /dev/null
@@ -1,275 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-/*
- * Copyright 2014-2020 Toradex
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "imx6q.dtsi"
-#include "imx6qdl-apalis.dtsi"
-
-/ {
-	model = "Toradex Apalis iMX6Q/D Module on Ixora Carrier Board";
-	compatible = "toradex,apalis_imx6q-ixora", "toradex,apalis_imx6q",
-		     "fsl,imx6q";
-
-	aliases {
-		i2c0 = &i2c1;
-		i2c1 = &i2c3;
-		i2c2 = &i2c2;
-		rtc0 = &rtc_i2c;
-		rtc1 = &snvs_rtc;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		wakeup {
-			label = "Wake-Up";
-			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WAKEUP>;
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-	};
-
-	lcd_display: disp0 {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
-		status = "okay";
-
-		port@0 {
-			reg = <0>;
-
-			lcd_display_in: endpoint {
-				remote-endpoint = <&ipu1_di1_disp1>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_display_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-	};
-
-	panel: panel {
-		/*
-		 * edt,et057090dhu: EDT 5.7" LCD TFT
-		 * edt,et070080dh6: EDT 7.0" LCD TFT
-		 */
-		compatible = "edt,et057090dhu";
-		backlight = <&backlight>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_leds_ixora>;
-
-		led4-green {
-			label = "LED_4_GREEN";
-			gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
-		};
-
-		led4-red {
-			label = "LED_4_RED";
-			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
-		};
-
-		led5-green {
-			label = "LED_5_GREEN";
-			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
-		};
-
-		led5-red {
-			label = "LED_5_RED";
-			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&backlight {
-	brightness-levels = <0 127 191 223 239 247 251 255>;
-	default-brightness-level = <1>;
-	status = "okay";
-};
-
-&can1 {
-	status = "okay";
-};
-
-&can2 {
-	status = "okay";
-};
-
-&hdmi {
-	status = "okay";
-};
-
-/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
-&i2c1 {
-	status = "okay";
-
-	/*
-	 * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>,
-	 * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms
-	 */
-	touchscreen@4a {
-		compatible = "atmel,maxtouch";
-		reg = <0x4a>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>; /* SODIMM 13 */
-		status = "disabled";
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-	};
-
-	/* M41T0M6 real time clock on carrier board */
-	rtc_i2c: rtc@68 {
-		compatible = "st,m41t0";
-		reg = <0x68>;
-	};
-};
-
-/*
- * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
- * board)
- */
-&i2c3 {
-	status = "okay";
-};
-
-&ipu1_di1_disp1 {
-	remote-endpoint = <&lcd_display_in>;
-};
-
-&ldb {
-	status = "okay";
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_reset_moci>;
-	/* active-high meaning opposite of regular PERST# active-low polarity */
-	reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-	reset-gpio-active-high;
-	status = "okay";
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&pwm2 {
-	status = "okay";
-};
-
-&pwm3 {
-	status = "okay";
-};
-
-&pwm4 {
-	status = "okay";
-};
-
-&reg_usb_otg_vbus {
-	status = "okay";
-};
-
-&reg_usb_host_vbus {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&sound_spdif {
-	status = "okay";
-};
-
-&spdif {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart4 {
-	status = "okay";
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_host_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	status = "okay";
-};
-
-/* SD1 */
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>;
-	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&iomuxc {
-	/* Mux the Apalis GPIOs */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2
-		     &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4
-		     &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6
-		     &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8
-		    >;
-
-	pinctrl_leds_ixora: ledsixoragrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0
-			MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x1b0b0
-			MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
-			MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts
deleted file mode 100644
index 0b40f52268b3..000000000000
--- a/arch/arm/boot/dts/imx6q-arm2.dts
+++ /dev/null
@@ -1,225 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include "imx6q.dtsi"
-
-/ {
-	model = "Freescale i.MX6 Quad Armadillo2 Board";
-	compatible = "fsl,imx6q-arm2", "fsl,imx6q";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x80000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usb_otg_vbus: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 0>;
-			enable-active-high;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		debug-led {
-			label = "Heartbeat";
-			gpios = <&gpio3 25 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	status = "disabled"; /* gpmi nand conflicts with SD */
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6q-arm2 {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x80000000
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL1__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_KEY_COL2__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
-			>;
-		};
-
-		pinctrl_gpmi_nand: gpminandgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
-				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
-				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
-				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
-				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
-				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
-				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
-				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
-				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
-				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
-				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
-				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
-				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
-				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
-				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
-				MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D26__UART2_RX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D27__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B	0x1b0b1
-				MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart4: uart4grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
-				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
-				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
-				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
-				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3_cdwp: usdhc3cdwp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x80000000
-				MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x80000000
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
-				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
-				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
-				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
-			>;
-		};
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
-			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
-	fsl,err006687-workaround-present;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc3 {
-	cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
-	vmmc-supply = <&reg_3p3v>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3
-		     &pinctrl_usdhc3_cdwp>;
-	status = "okay";
-};
-
-&usdhc4 {
-	non-removable;
-	vmmc-supply = <&reg_3p3v>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	fsl,dte-mode;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-display5-tianma-tm070-1280x768.dts b/arch/arm/boot/dts/imx6q-display5-tianma-tm070-1280x768.dts
deleted file mode 100644
index 16658b76fc4e..000000000000
--- a/arch/arm/boot/dts/imx6q-display5-tianma-tm070-1280x768.dts
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Copyright 2017
- * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is licensed under the terms of the GNU General Public
- *     License version 2.  This program is licensed "as is" without
- *     any warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "imx6q-display5.dtsi"
-
-&panel {
-	compatible = "tianma,tm070jdhg30";
-};
-
-&ldb {
-	lvds0: lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
deleted file mode 100644
index c713ac03b3b9..000000000000
--- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
+++ /dev/null
@@ -1,481 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Data Modul AG
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include "imx6q.dtsi"
-
-/ {
-	model = "Data Modul eDM-QMX6 Board";
-	compatible = "dmo,imx6q-edmqmx6", "fsl,imx6q";
-
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	aliases {
-		gpio7 = &stmpe_gpio1;
-		gpio8 = &stmpe_gpio2;
-		stmpe-i2c0 = &stmpe1;
-		stmpe-i2c1 = &stmpe2;
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x80000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usb_otg_switch: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "usb_otg_switch";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio7 12 0>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		reg_usb_host1: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "usb_host1_en";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio3 31 0>;
-			enable-active-high;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		led-blue {
-			label = "blue";
-			gpios = <&stmpe_gpio1 8 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		led-green {
-			label = "green";
-			gpios = <&stmpe_gpio1 9 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-pink {
-			label = "pink";
-			gpios = <&stmpe_gpio1 10 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-red {
-			label = "red";
-			gpios = <&stmpe_gpio1 11 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	status = "okay";
-};
-
-&ecspi5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi5>;
-	cs-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	flash: m25p80@0 {
-		compatible = "m25p80", "jedec,spi-nor";
-		spi-max-frequency = <40000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
-	phy-supply = <&vgen2_1v2_eth>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2
-		     &pinctrl_stmpe1
-		     &pinctrl_stmpe2
-		     &pinctrl_pfuze>;
-	status = "okay";
-
-	pmic: pfuze100@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <20 8>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-				regulator-always-on;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen2_1v2_eth: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vdd_high_in: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-
-	stmpe1: stmpe1601@40 {
-		compatible = "st,stmpe1601";
-		reg = <0x40>;
-		interrupts = <30 0>;
-		interrupt-parent = <&gpio3>;
-		vcc-supply = <&sw2_reg>;
-		vio-supply = <&sw2_reg>;
-
-		stmpe_gpio1: stmpe_gpio {
-			#gpio-cells = <2>;
-			compatible = "st,stmpe-gpio";
-		};
-	};
-
-	stmpe2: stmpe1601@44 {
-		compatible = "st,stmpe1601";
-		reg = <0x44>;
-		interrupts = <2 0>;
-		interrupt-parent = <&gpio5>;
-		vcc-supply = <&sw2_reg>;
-		vio-supply = <&sw2_reg>;
-
-		stmpe_gpio2: stmpe_gpio {
-			#gpio-cells = <2>;
-			compatible = "st,stmpe-gpio";
-		};
-	};
-
-	temp1: ad7414@4c {
-		compatible = "ad,ad7414";
-		reg = <0x4c>;
-	};
-
-	temp2: ad7414@4d {
-		compatible = "ad,ad7414";
-		reg = <0x4d>;
-	};
-
-	rtc: m41t62@68 {
-		compatible = "st,m41t62";
-		reg = <0x68>;
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6q-dmo-edmqmx6 {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x80000000
-				MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x80000000
-			>;
-		};
-
-		pinctrl_can1: can1grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
-				MX6QDL_PAD_GPIO_7__FLEXCAN1_TX		0x1b0b0
-			>;
-		};
-
-		pinctrl_ecspi5: ecspi5rp-1 {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO	0x80000000
-				MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI		0x80000000
-				MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK		0x80000000
-				MX6QDL_PAD_SD2_DAT3__GPIO1_IO12		0x80000000
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b0b0
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_pcie: pciegrp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL1__GPIO4_IO08		0x100b1
-			>;
-		};
-
-		pinctrl_pfuze: pfuze100grp1 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x80000000
-			>;
-		};
-
-		pinctrl_stmpe1: stmpe1grp {
-			fsl,pins = <MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x80000000>;
-		};
-
-		pinctrl_stmpe2: stmpe2grp {
-			fsl,pins = <MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
-				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
-				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
-				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
-			>;
-		};
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_host1>;
-	disable-over-current;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	vmmc-supply = <&reg_3p3v>;
-	non-removable;
-	bus-width = <8>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-gk802.dts b/arch/arm/boot/dts/imx6q-gk802.dts
deleted file mode 100644
index ccc2487d47ca..000000000000
--- a/arch/arm/boot/dts/imx6q-gk802.dts
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- * Copyright (C) 2013 Philipp Zabel
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "imx6q.dtsi"
-
-/ {
-	model = "Zealz GK802";
-	compatible = "zealz,imx6q-gk802", "fsl,imx6q";
-
-	chosen {
-		stdout-path = &uart4;
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		recovery-button {
-			label = "recovery";
-			gpios = <&gpio3 16 1>;
-			linux,code = <KEY_RESTART>;
-			wakeup-source;
-		};
-	};
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c3>;
-	status = "okay";
-};
-
-/* Internal I2C */
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	clock-frequency = <100000>;
-	status = "okay";
-
-	/* SDMC DM2016 1024 bit EEPROM + 128 bit OTP */
-	eeprom: dm2016@51 {
-		compatible = "sdmc,dm2016";
-		reg = <0x51>;
-	};
-};
-
-/* External I2C via HDMI */
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	clock-frequency = <100000>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6q-gk802 {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				/* Recovery button, active-low */
-				MX6QDL_PAD_EIM_D16__GPIO3_IO16  0x100b1
-				/* RTL8192CU enable GPIO, active-low */
-				MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_GPIO_16__I2C3_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_uart4: uart4grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
-				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-			>;
-		};
-	};
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-/* External USB-A port (USBOTG) */
-&usbotg {
-	disable-over-current;
-	status = "okay";
-};
-
-/* Internal USB port (USBH1), connected to RTL8192CU */
-&usbh1 {
-	disable-over-current;
-	status = "okay";
-};
-
-/* External microSD */
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	bus-width = <4>;
-	cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-/* Internal microSD */
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <4>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-gw551x.dts b/arch/arm/boot/dts/imx6q-gw551x.dts
deleted file mode 100644
index 2c7feeef1b0e..000000000000
--- a/arch/arm/boot/dts/imx6q-gw551x.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2014 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-gw551x.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 Dual/Quad GW551X";
-	compatible = "gw,imx6q-gw551x", "gw,ventana", "fsl,imx6q";
-};
diff --git a/arch/arm/boot/dts/imx6q-gw553x.dts b/arch/arm/boot/dts/imx6q-gw553x.dts
deleted file mode 100644
index e9c224cea752..000000000000
--- a/arch/arm/boot/dts/imx6q-gw553x.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2016 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-gw553x.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 Dual/Quad GW553X";
-	compatible = "gw,imx6q-gw553x", "gw,ventana", "fsl,imx6q";
-};
diff --git a/arch/arm/boot/dts/imx6q-gw560x.dts b/arch/arm/boot/dts/imx6q-gw560x.dts
deleted file mode 100644
index 735f2bbf1439..000000000000
--- a/arch/arm/boot/dts/imx6q-gw560x.dts
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-gw560x.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 Dual/Quad GW560X";
-	compatible = "gw,imx6q-gw560x", "gw,ventana", "fsl,imx6q";
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-gw5903.dts b/arch/arm/boot/dts/imx6q-gw5903.dts
deleted file mode 100644
index a182e4cb0e6e..000000000000
--- a/arch/arm/boot/dts/imx6q-gw5903.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-gw5903.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 Dual/Quad GW5903";
-	compatible = "gw,imx6q-gw5903", "gw,ventana", "fsl,imx6q";
-};
diff --git a/arch/arm/boot/dts/imx6q-gw5904.dts b/arch/arm/boot/dts/imx6q-gw5904.dts
deleted file mode 100644
index ca1e2ae3341e..000000000000
--- a/arch/arm/boot/dts/imx6q-gw5904.dts
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-gw5904.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 Dual/Quad GW5904";
-	compatible = "gw,imx6q-gw5904", "gw,ventana", "fsl,imx6q";
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-h100.dts b/arch/arm/boot/dts/imx6q-h100.dts
deleted file mode 100644
index b8feadbff967..000000000000
--- a/arch/arm/boot/dts/imx6q-h100.dts
+++ /dev/null
@@ -1,382 +0,0 @@
-/*
- * Copyright (C) 2015 Lucas Stach <kernel@pengutronix.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6qdl-sr-som.dtsi"
-#include "imx6qdl-sr-som-brcm.dtsi"
-
-/ {
-	model = "Auvidea H100";
-	compatible = "auvidea,h100", "fsl,imx6q";
-
-	/* Will be filled by the bootloader */
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0>;
-	};
-
-	aliases {
-		rtc0 = &rtc;
-		rtc1 = &snvs_rtc;
-	};
-
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	hdmi_osc: hdmi-osc {
-		compatible = "fixed-clock";
-		clock-output-names = "hdmi-osc";
-		clock-frequency = <27000000>;
-		#clock-cells = <0>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_h100_leds>;
-
-		led0: power {
-			label = "power";
-			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-
-		led1: stream {
-			label = "stream";
-			gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led2: rec {
-			label = "rec";
-			gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_hdmi: regulator-hdmi {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_h100_reg_hdmi>;
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
-		regulator-name = "V_HDMI";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	reg_usbh1_vbus: regulator-usb-h1-vbus {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_h100_usbh1_vbus>;
-		regulator-name = "USB_H1_VBUS";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_usbotg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_h100_usbotg_vbus>;
-		regulator-name = "USB_OTG_VBUS";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	sound-sgtl5000 {
-		compatible = "fsl,imx-audio-sgtl5000";
-		model = "H100 on-board codec";
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-ext-port = <5>;
-		mux-int-port = <1>;
-		ssi-controller = <&ssi1>;
-	};
-};
-
-&audmux {
-	status = "okay";
-};
-
-&hdmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_h100_hdmi>;
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_h100_i2c1>;
-	status = "okay";
-
-	eeprom: 24c02@51 {
-		compatible = "microchip,24c02", "atmel,24c02";
-		reg = <0x51>;
-	};
-
-	rtc: pcf8523@68 {
-		compatible = "nxp,pcf8523";
-		reg = <0x68>;
-	};
-
-	sgtl5000: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_h100_sgtl5000>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_3p3v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-
-	tc358743: tc358743@f {
-		compatible = "toshiba,tc358743";
-		reg = <0x0f>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_h100_tc358743>;
-		clocks = <&hdmi_osc>;
-		clock-names = "refclk";
-		reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
-		/* IRQ has a wrong pull resistor which renders it useless  */
-
-		port {
-			tc358743_out: endpoint {
-				remote-endpoint = <&mipi_csi2_in>;
-				data-lanes = <1 2 3 4>;
-				clock-lanes = <0>;
-				clock-noncontinuous;
-				link-frequencies = /bits/ 64 <297000000>;
-			};
-		};
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_h100_i2c2>;
-	status = "okay";
-};
-
-&iomuxc {
-	h100 {
-		pinctrl_h100_hdmi: h100-hdmi {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE	0x1f8b0
-			>;
-		};
-
-		pinctrl_h100_i2c1: h100-i2c1 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_h100_i2c2: h100-i2c2 {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_h100_leds: pinctrl-h100-leds {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_DA0__GPIO3_IO00		0x1b0b0
-				MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x1b0b0
-				MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0x1b0b0
-			>;
-		};
-
-		pinctrl_h100_reg_hdmi: h100-reg-hdmi {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_A18__GPIO2_IO20		0x1b0b0
-			>;
-		};
-
-		pinctrl_h100_sgtl5000: h100-sgtl5000 {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT19__AUD5_RXD	0x130b0
-				MX6QDL_PAD_KEY_COL0__AUD5_TXC		0x130b0
-				MX6QDL_PAD_KEY_ROW0__AUD5_TXD		0x110b0
-				MX6QDL_PAD_KEY_COL1__AUD5_TXFS		0x130b0
-				MX6QDL_PAD_GPIO_5__CCM_CLKO1		0x130b0
-			>;
-		};
-
-		pinctrl_h100_tc358743: h100-tc358743 {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x1b0b0
-			>;
-		};
-
-		pinctrl_h100_uart2: h100-uart2 {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_h100_usbh1_vbus: hummingboard-usbh1-vbus {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
-			>;
-		};
-
-		pinctrl_h100_usbotg_id: hummingboard-usbotg-id {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x13059
-			>;
-		};
-
-		pinctrl_h100_usbotg_vbus: hummingboard-usbotg-vbus {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0
-			>;
-		};
-
-		pinctrl_h100_usdhc2: h100-usdhc2 {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1f071
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x13059
-				MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x1b0b0
-			>;
-		};
-
-		pinctrl_h100_usdhc2_100mhz: h100-usdhc2-100mhz {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1f071
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170b9
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100b9
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
-				MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x1b0b0
-			>;
-		};
-
-		pinctrl_h100_usdhc2_200mhz: h100-usdhc2-200mhz {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1f071
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170f9
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100f9
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
-				MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x1b0b0
-			>;
-		};
-	};
-};
-
-&mipi_csi {
-	status = "okay";
-
-	port {
-		mipi_csi2_in: endpoint {
-			remote-endpoint = <&tc358743_out>;
-			data-lanes = <1 2 3 4>;
-			clock-lanes = <0>;
-			clock-noncontinuous;
-			link-frequencies = /bits/ 64 <297000000>;
-		};
-	};
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_h100_uart2>;
-	status = "okay";
-};
-
-&usbh1 {
-	disable-over-current;
-	vbus-supply = <&reg_usbh1_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	disable-over-current;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_h100_usbotg_id>;
-	vbus-supply = <&reg_usbotg_vbus>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_h100_usdhc2>;
-	pinctrl-1 = <&pinctrl_h100_usdhc2_100mhz>;
-	pinctrl-2 = <&pinctrl_h100_usdhc2_200mhz>;
-	vmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi
deleted file mode 100644
index 4d6a0c3e8455..000000000000
--- a/arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi
+++ /dev/null
@@ -1,35 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Copyright 2019 (C) Pengutronix, Marco Felsch <kernel@pengutronix.de>
- */
-
-#include "imx6q.dtsi"
-#include "imx6qdl-kontron-samx6i.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Kontron SMARC sAMX6i Quad/Dual";
-	compatible = "kontron,imx6q-samx6i", "fsl,imx6q";
-};
-
-/* Quad/Dual SoMs have 3 chip-select signals */
-&ecspi4 {
-	cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>,
-		   <&gpio3 29 GPIO_ACTIVE_LOW>,
-		   <&gpio3 25 GPIO_ACTIVE_LOW>;
-};
-
-&pinctrl_ecspi4 {
-	fsl,pins = <
-		MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
-		MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
-		MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
-
-		/* SPI4_IMX_CS2# - connected to internal flash */
-		MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x1b0b0
-		/* SPI4_IMX_CS0# - connected to SMARC SPI0_CS0# */
-		MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0
-		/* SPI4_CS3# - connected to  SMARC SPI0_CS1# */
-		MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x1b0b0
-	>;
-};
diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
deleted file mode 100644
index dc51262e7b2f..000000000000
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-sabrelite.dtsi"
-
-/ {
-	model = "Freescale i.MX6 Quad SABRE Lite Board";
-	compatible = "fsl,imx6q-sabrelite", "fsl,imx6q";
-};
-
-&sata {
-	status = "okay";
-};
-
-&ipu1_csi1_from_mipi_vc1 {
-	clock-lanes = <0>;
-	data-lanes = <1 2>;
-};
diff --git a/arch/arm/boot/dts/imx6q-sbc6x.dts b/arch/arm/boot/dts/imx6q-sbc6x.dts
deleted file mode 100644
index 9054c1d58b9d..000000000000
--- a/arch/arm/boot/dts/imx6q-sbc6x.dts
+++ /dev/null
@@ -1,93 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 2013 Pavel Machek <pavel@denx.de>
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-
-/ {
-	model = "MicroSys sbc6x board";
-	compatible = "microsys,sbc6x", "fsl,imx6q";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x80000000>;
-	};
-};
-
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	status = "okay";
-};
-
-&iomuxc {
-	imx6q-sbc6x {
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			>;
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts
deleted file mode 100644
index ac3050a835e5..000000000000
--- a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lcd.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-1010 Module on CoMpact TFT";
-	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
-};
-
-&backlight {
-	pwms = <&pwm2 0 500000 0>;
-	/delete-property/ turn-on-delay-ms;
-};
-
-&can1 {
-	status = "disabled";
-};
-
-&can2 {
-	xceiver-supply = <&reg_3v3>;
-};
-
-&kpp {
-	status = "disabled";
-};
-
-&lcd_panel {
-	compatible = "edt,etm0700g0edh6";
-};
-
-&reg_can_xcvr {
-	status = "disabled";
-};
-
-&touchscreen {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010.dts b/arch/arm/boot/dts/imx6q-tx6q-1010.dts
deleted file mode 100644
index 4ee860b626ff..000000000000
--- a/arch/arm/boot/dts/imx6q-tx6q-1010.dts
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lcd.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-1010/-1030 Module";
-	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
-};
-
-&ipu2 {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts
deleted file mode 100644
index a773f252816c..000000000000
--- a/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lcd.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-1020 Module on CoMpact TFT";
-	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
-};
-
-&backlight {
-	pwms = <&pwm2 0 500000 0>;
-	/delete-property/ turn-on-delay-ms;
-};
-
-&can1 {
-	status = "disabled";
-};
-
-&can2 {
-	xceiver-supply = <&reg_3v3>;
-};
-
-&ds1339 {
-	status = "disabled";
-};
-
-&gpmi {
-	status = "disabled";
-};
-
-&kpp {
-	status = "disabled";
-};
-
-&lcd_panel {
-	compatible = "edt,etm0700g0edh6";
-};
-
-&reg_can_xcvr {
-	status = "disabled";
-};
-
-&touchscreen {
-	status = "disabled";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <4>;
-	no-1-8-v;
-	fsl,wp-controller;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_usdhc4: usdhc4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
-			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
-			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1020.dts b/arch/arm/boot/dts/imx6q-tx6q-1020.dts
deleted file mode 100644
index 0a4daec8d3ad..000000000000
--- a/arch/arm/boot/dts/imx6q-tx6q-1020.dts
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lcd.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-1020 Module";
-	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
-};
-
-&ds1339 {
-	status = "disabled";
-};
-
-&gpmi {
-	status = "disabled";
-};
-
-&ipu2 {
-	status = "disabled";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <4>;
-	non-removable;
-	no-1-8-v;
-	fsl,wp-controller;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_usdhc4: usdhc4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
-			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
-			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1036-mb7.dts b/arch/arm/boot/dts/imx6q-tx6q-1036-mb7.dts
deleted file mode 100644
index 9ffbb0fe7df8..000000000000
--- a/arch/arm/boot/dts/imx6q-tx6q-1036-mb7.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q-tx6q-1036.dts"
-#include "imx6qdl-tx6-mb7.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-1036 Module on MB7 baseboard";
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1036.dts b/arch/arm/boot/dts/imx6q-tx6q-1036.dts
deleted file mode 100644
index cb2fcb4896c6..000000000000
--- a/arch/arm/boot/dts/imx6q-tx6q-1036.dts
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lcd.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-1036 Module";
-	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
-};
-
-&ds1339 {
-	status = "disabled";
-};
-
-&gpmi {
-	status = "disabled";
-};
-
-&ipu2 {
-	status = "disabled";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <4>;
-	non-removable;
-	no-1-8-v;
-	fsl,wp-controller;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_usdhc4: usdhc4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
-			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
-			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-10x0-mb7.dts b/arch/arm/boot/dts/imx6q-tx6q-10x0-mb7.dts
deleted file mode 100644
index d43a5d8f1749..000000000000
--- a/arch/arm/boot/dts/imx6q-tx6q-10x0-mb7.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q-tx6q-1010.dts"
-#include "imx6qdl-tx6-mb7.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-1010/-1030 Module on MB7 baseboard";
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1110.dts b/arch/arm/boot/dts/imx6q-tx6q-1110.dts
deleted file mode 100644
index f7b0acb65352..000000000000
--- a/arch/arm/boot/dts/imx6q-tx6q-1110.dts
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lvds.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-1110/-1130 Module";
-	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
-};
-
-&ipu2 {
-	status = "disabled";
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts b/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts
deleted file mode 100644
index 387edf2b3f96..000000000000
--- a/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright 2016-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q-tx6q-1110.dts"
-#include "imx6qdl-tx6-mb7.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-1110/-1130 Module on MB7 baseboard";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
deleted file mode 100644
index 30fa349f9d05..000000000000
--- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ /dev/null
@@ -1,953 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-/*
- * Copyright 2014-2020 Toradex
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Toradex Apalis iMX6Q/D Module";
-	compatible = "toradex,apalis_imx6q", "fsl,imx6q";
-
-	/* Will be filled by the bootloader */
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0>;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_bl_on>;
-		pwms = <&pwm4 0 5000000>;
-		enable-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
-		status = "disabled";
-	};
-
-	reg_module_3v3: regulator-module-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "+V3.3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_module_3v3_audio: regulator-module-3v3-audio {
-		compatible = "regulator-fixed";
-		regulator-name = "+V3.3_AUDIO";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_regulator_usbotg_pwr>;
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		status = "disabled";
-	};
-
-	/* on module USB hub */
-	reg_usb_host_vbus_hub: regulator-usb-host-vbus-hub {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_regulator_usbhub_pwr>;
-		regulator-name = "usb_host_vbus_hub";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 28 GPIO_ACTIVE_HIGH>;
-		startup-delay-us = <2000>;
-		enable-active-high;
-		status = "okay";
-	};
-
-	reg_usb_host_vbus: regulator-usb-host-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_regulator_usbh_pwr>;
-		regulator-name = "usb_host_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio =  <&gpio1 0 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		vin-supply = <&reg_usb_host_vbus_hub>;
-		status = "disabled";
-	};
-
-	sound {
-		compatible = "fsl,imx-audio-sgtl5000";
-		model = "imx6q-apalis-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"LINE_IN", "Line In Jack",
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <4>;
-	};
-
-	sound_spdif: sound-spdif {
-		compatible = "fsl,imx-audio-spdif";
-		model = "imx-spdif";
-		spdif-controller = <&spdif>;
-		spdif-in;
-		spdif-out;
-		status = "disabled";
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&pinctrl_flexcan1_default>;
-	pinctrl-1 = <&pinctrl_flexcan1_sleep>;
-	status = "disabled";
-};
-
-&can2 {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&pinctrl_flexcan2_default>;
-	pinctrl-1 = <&pinctrl_flexcan2_sleep>;
-	status = "disabled";
-};
-
-/* Apalis SPI1 */
-&ecspi1 {
-	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "disabled";
-};
-
-/* Apalis SPI2 */
-&ecspi2 {
-	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	status = "disabled";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	phy-handle = <&ethphy>;
-	phy-reset-duration = <10>;
-	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy: ethernet-phy@7 {
-			interrupt-parent = <&gpio1>;
-			interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
-			reg = <7>;
-		};
-	};
-};
-
-&hdmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hdmi_ddc &pinctrl_hdmi_cec>;
-	status = "disabled";
-};
-
-/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "disabled";
-};
-
-/*
- * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
- * touch screen controller
- */
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	pinctrl-1 = <&pinctrl_i2c2_gpio>;
-	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-
-	pmic: pfuze100@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-
-	codec: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_module_3v3_audio>;
-		VDDIO-supply = <&reg_module_3v3>;
-		VDDD-supply = <&vgen4_reg>;
-	};
-
-	/* STMPE811 touch screen controller */
-	stmpe811@41 {
-		compatible = "st,stmpe811";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_touch_int>;
-		reg = <0x41>;
-		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-parent = <&gpio4>;
-		interrupt-controller;
-		id = <0>;
-		blocks = <0x5>;
-		irq-trigger = <0x1>;
-		/* 3.25 MHz ADC clock speed */
-		st,adc-freq = <1>;
-		/* 12-bit ADC */
-		st,mod-12b = <1>;
-		/* internal ADC reference */
-		st,ref-sel = <0>;
-		/* ADC converstion time: 80 clocks */
-		st,sample-time = <4>;
-
-		stmpe_touchscreen {
-			compatible = "st,stmpe-ts";
-			/* 8 sample average control */
-			st,ave-ctrl = <3>;
-			/* 7 length fractional part in z */
-			st,fraction-z = <7>;
-			/*
-			 * 50 mA typical 80 mA max touchscreen drivers
-			 * current limit value
-			 */
-			st,i-drive = <1>;
-			/* 1 ms panel driver settling time */
-			st,settling = <3>;
-			/* 5 ms touch detect interrupt delay */
-			st,touch-det-delay = <5>;
-		};
-
-		stmpe_adc {
-			compatible = "st,stmpe-adc";
-			/* forbid to use ADC channels 3-0 (touch) */
-			st,norequest-mask = <0x0F>;
-		};
-	};
-};
-
-/*
- * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
- * board)
- */
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	pinctrl-1 = <&pinctrl_i2c3_gpio>;
-	scl-gpios = <&gpio3 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio3 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "disabled";
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "disabled";
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>;
-	status = "disabled";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "disabled";
-};
-
-&pwm4 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "disabled";
-};
-
-&spdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spdif>;
-	status = "disabled";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>;
-	fsl,dte-mode;
-	uart-has-rtscts;
-	status = "disabled";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2_dte>;
-	fsl,dte-mode;
-	uart-has-rtscts;
-	status = "disabled";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4_dte>;
-	fsl,dte-mode;
-	status = "disabled";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5_dte>;
-	fsl,dte-mode;
-	status = "disabled";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "disabled";
-};
-
-/* MMC1 */
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_usdhc1_8bit>;
-	vqmmc-supply = <&reg_module_3v3>;
-	bus-width = <8>;
-	disable-wp;
-	no-1-8-v;
-	status = "disabled";
-};
-
-/* SD1 */
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	vqmmc-supply = <&reg_module_3v3>;
-	bus-width = <4>;
-	disable-wp;
-	no-1-8-v;
-	status = "disabled";
-};
-
-/* eMMC */
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	vqmmc-supply = <&reg_module_3v3>;
-	bus-width = <8>;
-	no-1-8-v;
-	non-removable;
-	status = "okay";
-};
-
-&weim {
-	status = "disabled";
-};
-
-&iomuxc {
-	pinctrl_apalis_gpio1: gpio2io04grp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x130b0
-		>;
-	};
-
-	pinctrl_apalis_gpio2: gpio2io05grp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x130b0
-		>;
-	};
-
-	pinctrl_apalis_gpio3: gpio2io06grp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x130b0
-		>;
-	};
-
-	pinctrl_apalis_gpio4: gpio2io07grp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x130b0
-		>;
-	};
-
-	pinctrl_apalis_gpio5: gpio6io10grp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x130b0
-		>;
-	};
-
-	pinctrl_apalis_gpio6: gpio6io09grp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x130b0
-		>;
-	};
-
-	pinctrl_apalis_gpio7: gpio1io02grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x130b0
-		>;
-	};
-
-	pinctrl_apalis_gpio8: gpio1io06grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x130b0
-		>;
-	};
-
-	pinctrl_audmux: audmuxgrp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT20__AUD4_TXC	0x130b0
-			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD	0x130b0
-			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS	0x130b0
-			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD	0x130b0
-			/* SGTL5000 sys_mclk */
-			MX6QDL_PAD_GPIO_5__CCM_CLKO1		0x130b0
-		>;
-	};
-
-	pinctrl_cam_mclk: cammclkgrp {
-		fsl,pins = <
-			/* CAM sys_mclk */
-			MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x00b0
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO 0x100b1
-			MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI 0x100b1
-			MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK 0x100b1
-			/* SPI1 cs */
-			MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25 0x000b1
-		>;
-	};
-
-	pinctrl_ecspi2: ecspi2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
-			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
-			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
-			/* SPI2 cs */
-			MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x000b1
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-			/* Ethernet PHY reset */
-			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x000b0
-			/* Ethernet PHY interrupt */
-			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x000b1
-		>;
-	};
-
-	pinctrl_flexcan1_default: flexcan1defgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0
-			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0
-		>;
-	};
-
-	pinctrl_flexcan1_sleep: flexcan1slpgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x0
-			MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0
-		>;
-	};
-
-	pinctrl_flexcan2_default: flexcan2defgrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0
-			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0
-		>;
-	};
-	pinctrl_flexcan2_sleep: flexcan2slpgrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x0
-			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x0
-		>;
-	};
-
-	pinctrl_gpio_bl_on: gpioblon {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b0b0
-		>;
-	};
-
-	pinctrl_gpio_keys: gpio1io04grp {
-		fsl,pins = <
-			/* Power button */
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0
-		>;
-	};
-
-	pinctrl_hdmi_cec: hdmicecgrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
-		>;
-	};
-
-	pinctrl_hdmi_ddc: hdmiddcgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL 0x4001b8b1
-			MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
-			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c1_gpio: i2c1gpiogrp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x4001b8b1
-			MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2_gpio: i2c2gpiogrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
-			MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3_gpio: i2c3gpiogrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x4001b8b1
-			MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x4001b8b1
-		>;
-	};
-
-	pinctrl_ipu1_csi0: ipu1csi0grp { /* parallel camera */
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12  0xb0b1
-			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13  0xb0b1
-			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14  0xb0b1
-			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15  0xb0b1
-			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16  0xb0b1
-			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17  0xb0b1
-			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18  0xb0b1
-			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19  0xb0b1
-			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0xb0b1
-			MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC    0xb0b1
-			MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC   0xb0b1
-		>;
-	};
-
-	pinctrl_ipu1_lcdif: ipu1lcdifgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_A16__IPU1_DI1_DISP_CLK	0x61
-			/* DE */
-			MX6QDL_PAD_EIM_DA10__IPU1_DI1_PIN15	0x61
-			/* HSync */
-			MX6QDL_PAD_EIM_DA11__IPU1_DI1_PIN02	0x61
-			/* VSync */
-			MX6QDL_PAD_EIM_DA12__IPU1_DI1_PIN03	0x61
-			MX6QDL_PAD_EIM_DA9__IPU1_DISP1_DATA00	0x61
-			MX6QDL_PAD_EIM_DA8__IPU1_DISP1_DATA01	0x61
-			MX6QDL_PAD_EIM_DA7__IPU1_DISP1_DATA02	0x61
-			MX6QDL_PAD_EIM_DA6__IPU1_DISP1_DATA03	0x61
-			MX6QDL_PAD_EIM_DA5__IPU1_DISP1_DATA04	0x61
-			MX6QDL_PAD_EIM_DA4__IPU1_DISP1_DATA05	0x61
-			MX6QDL_PAD_EIM_DA3__IPU1_DISP1_DATA06	0x61
-			MX6QDL_PAD_EIM_DA2__IPU1_DISP1_DATA07	0x61
-			MX6QDL_PAD_EIM_DA1__IPU1_DISP1_DATA08	0x61
-			MX6QDL_PAD_EIM_DA0__IPU1_DISP1_DATA09	0x61
-			MX6QDL_PAD_EIM_EB1__IPU1_DISP1_DATA10	0x61
-			MX6QDL_PAD_EIM_EB0__IPU1_DISP1_DATA11	0x61
-			MX6QDL_PAD_EIM_A17__IPU1_DISP1_DATA12	0x61
-			MX6QDL_PAD_EIM_A18__IPU1_DISP1_DATA13	0x61
-			MX6QDL_PAD_EIM_A19__IPU1_DISP1_DATA14	0x61
-			MX6QDL_PAD_EIM_A20__IPU1_DISP1_DATA15	0x61
-			MX6QDL_PAD_EIM_A21__IPU1_DISP1_DATA16	0x61
-			MX6QDL_PAD_EIM_A22__IPU1_DISP1_DATA17	0x61
-			MX6QDL_PAD_EIM_A23__IPU1_DISP1_DATA18	0x61
-			MX6QDL_PAD_EIM_A24__IPU1_DISP1_DATA19	0x61
-			MX6QDL_PAD_EIM_D31__IPU1_DISP1_DATA20	0x61
-			MX6QDL_PAD_EIM_D30__IPU1_DISP1_DATA21	0x61
-			MX6QDL_PAD_EIM_D26__IPU1_DISP1_DATA22	0x61
-			MX6QDL_PAD_EIM_D27__IPU1_DISP1_DATA23	0x61
-		>;
-	};
-
-	pinctrl_ipu2_vdac: ipu2vdacgrp {
-		fsl,pins = <
-			MX6QDL_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK 0xd1
-			MX6QDL_PAD_DI0_PIN15__IPU2_DI0_PIN15       0xd1
-			MX6QDL_PAD_DI0_PIN2__IPU2_DI0_PIN02        0xd1
-			MX6QDL_PAD_DI0_PIN3__IPU2_DI0_PIN03        0xd1
-			MX6QDL_PAD_DISP0_DAT0__IPU2_DISP0_DATA00   0xf9
-			MX6QDL_PAD_DISP0_DAT1__IPU2_DISP0_DATA01   0xf9
-			MX6QDL_PAD_DISP0_DAT2__IPU2_DISP0_DATA02   0xf9
-			MX6QDL_PAD_DISP0_DAT3__IPU2_DISP0_DATA03   0xf9
-			MX6QDL_PAD_DISP0_DAT4__IPU2_DISP0_DATA04   0xf9
-			MX6QDL_PAD_DISP0_DAT5__IPU2_DISP0_DATA05   0xf9
-			MX6QDL_PAD_DISP0_DAT6__IPU2_DISP0_DATA06   0xf9
-			MX6QDL_PAD_DISP0_DAT7__IPU2_DISP0_DATA07   0xf9
-			MX6QDL_PAD_DISP0_DAT8__IPU2_DISP0_DATA08   0xf9
-			MX6QDL_PAD_DISP0_DAT9__IPU2_DISP0_DATA09   0xf9
-			MX6QDL_PAD_DISP0_DAT10__IPU2_DISP0_DATA10  0xf9
-			MX6QDL_PAD_DISP0_DAT11__IPU2_DISP0_DATA11  0xf9
-			MX6QDL_PAD_DISP0_DAT12__IPU2_DISP0_DATA12  0xf9
-			MX6QDL_PAD_DISP0_DAT13__IPU2_DISP0_DATA13  0xf9
-			MX6QDL_PAD_DISP0_DAT14__IPU2_DISP0_DATA14  0xf9
-			MX6QDL_PAD_DISP0_DAT15__IPU2_DISP0_DATA15  0xf9
-		>;
-	};
-
-	pinctrl_mmc_cd: gpiommccdgrp {
-		fsl,pins = <
-			 /* MMC1 CD */
-			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x000b0
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm2: pwm2grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm4: pwm4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1
-		>;
-	};
-
-	pinctrl_regulator_usbh_pwr: gpioregusbhpwrgrp {
-		fsl,pins = <
-			/* USBH_EN */
-			MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x0f058
-		>;
-	};
-
-	pinctrl_regulator_usbhub_pwr: gpioregusbhubpwrgrp {
-		fsl,pins = <
-			/* USBH_HUB_EN */
-			MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x0f058
-		>;
-	};
-
-	pinctrl_regulator_usbotg_pwr: gpioregusbotgpwrgrp {
-		fsl,pins = <
-			/* USBO1 power en */
-			MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x0f058
-		>;
-	};
-
-	pinctrl_reset_moci: gpioresetmocigrp {
-		fsl,pins = <
-			/* RESET_MOCI control */
-			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x0f058
-		>;
-	};
-
-	pinctrl_sd_cd: gpiosdcdgrp {
-		fsl,pins = <
-			/* SD1 CD */
-			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x000b0
-		>;
-	};
-
-	pinctrl_spdif: spdifgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_16__SPDIF_IN  0x1b0b0
-			MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0
-		>;
-	};
-
-	pinctrl_touch_int: gpiotouchintgrp {
-		fsl,pins = <
-			/* STMPE811 interrupt */
-			MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0
-		>;
-	};
-
-	pinctrl_uart1_dce: uart1dcegrp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
-			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
-		>;
-	};
-
-	/* DTE mode */
-	pinctrl_uart1_dte: uart1dtegrp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x1b0b1
-			MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x1b0b1
-			MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x1b0b1
-			MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x1b0b1
-		>;
-	};
-
-	/* Additional DTR, DSR, DCD */
-	pinctrl_uart1_ctrl: uart1ctrlgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0
-			MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0
-			MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0
-		>;
-	};
-
-	pinctrl_uart2_dce: uart2dcegrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-		>;
-	};
-
-	/* DTE mode */
-	pinctrl_uart2_dte: uart2dtegrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_DAT6__UART2_RTS_B	0x1b0b1
-			MX6QDL_PAD_SD4_DAT5__UART2_CTS_B	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart4_dce: uart4dcegrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
-			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
-		>;
-	};
-
-	/* DTE mode */
-	pinctrl_uart4_dte: uart4dtegrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__UART4_RX_DATA 0x1b0b1
-			MX6QDL_PAD_KEY_ROW0__UART4_TX_DATA 0x1b0b1
-		>;
-	};
-
-	pinctrl_uart5_dce: uart5dcegrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
-			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
-		>;
-	};
-
-	/* DTE mode */
-	pinctrl_uart5_dte: uart5dtegrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL1__UART5_RX_DATA 0x1b0b1
-			MX6QDL_PAD_KEY_ROW1__UART5_TX_DATA 0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
-		>;
-	};
-
-	pinctrl_usdhc1_4bit: usdhc1grp_4bit {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17071
-			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10071
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071
-		>;
-	};
-
-	pinctrl_usdhc1_8bit: usdhc1grp_8bit {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_D0__SD1_DATA4 0x17071
-			MX6QDL_PAD_NANDF_D1__SD1_DATA5 0x17071
-			MX6QDL_PAD_NANDF_D2__SD1_DATA6 0x17071
-			MX6QDL_PAD_NANDF_D3__SD1_DATA7 0x17071
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17071
-			MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10071
-			MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17071
-			MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17071
-			MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17071
-			MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17071
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
-			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
-			/* eMMC reset */
-			MX6QDL_PAD_SD3_RST__SD3_RESET  0x17059
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
deleted file mode 100644
index e21f6ac864e5..000000000000
--- a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
+++ /dev/null
@@ -1,408 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * support fot the imx6 based aristainetos board
- *
- * Copyright (C) 2014 Heiko Schocher <hs@denx.de>
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-
-	reg_2p5v: regulator-2p5v {
-		compatible = "regulator-fixed";
-		regulator-name = "2P5V";
-		regulator-min-microvolt = <2500000>;
-		regulator-max-microvolt = <2500000>;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_usbh1_vbus: regulator-usbh1-vbus {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_aristainetos_usbh1_vbus>;
-		regulator-name = "usb_h1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_usbotg_vbus: regulator-usbotg-vbus {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_aristainetos_usbotg_vbus>;
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	tmp103: tmp103@71 {
-		compatible = "ti,tmp103";
-		reg = <0x71>;
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	rtc@68 {
-		compatible = "dallas,m41t00";
-		reg = <0x68>;
-	};
-};
-
-&ecspi4 {
-	cs-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi4>;
-	status = "okay";
-
-	flash: m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "micron,n25q128a11", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	status = "okay";
-};
-
-&pcie {
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usbh1_vbus>;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usbotg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	vmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	vmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog &pinctrl_gpio>;
-
-	imx6qdl-aristainetos {
-		pinctrl_aristainetos_usbh1_vbus: aristainetos-usbh1-vbus {
-			fsl,pins = <MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x130b0>;
-		};
-
-		pinctrl_aristainetos_usbotg_vbus: aristainetos-usbotg-vbus {
-			fsl,pins = <MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x130b0>;
-		};
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD  0x1b0b0
-				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC  0x1b0b0
-				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD  0x1b0b0
-				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0
-			>;
-		};
-
-		pinctrl_backlight: backlightgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_9__PWM1_OUT	0x1b0b0
-				MX6QDL_PAD_SD4_DAT1__PWM3_OUT	0x1b0b0
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02	0x1b0b0
-			>;
-		};
-
-		pinctrl_ecspi2: ecspi2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
-				MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
-				MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
-				MX6QDL_PAD_EIM_D24__GPIO3_IO24  0x100b1
-			>;
-		};
-
-		pinctrl_ecspi4: ecspi4grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
-				MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
-				MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
-				MX6QDL_PAD_EIM_D20__GPIO3_IO20  0x100b1
-				MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x1b0b0 /* WP pin */
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO  0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC    0x1b0b0
-				MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
-				MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
-				MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN   0x1b0b0
-				MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER   0x1b0b0
-				MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
-				MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
-				MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN  0x1b0b0
-			>;
-		};
-
-		pinctrl_flexcan1: flexcan1grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
-				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
-			>;
-		};
-
-		pinctrl_flexcan2: flexcan2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX	0x1b0b0
-				MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX	0x1b0b0
-				>;
-		};
-
-		pinctrl_gpio: gpiogrp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT2__GPIO2_IO10	0x1b0b0
-				MX6QDL_PAD_SD4_DAT3__GPIO2_IO11	0x1b0b0
-				MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0
-				MX6QDL_PAD_SD4_DAT5__GPIO2_IO13	0x1b0b0
-				MX6QDL_PAD_GPIO_3__GPIO1_IO03	0x1b0b0
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04	0x1b0b0
-				MX6QDL_PAD_GPIO_5__GPIO1_IO05	0x1b0b0
-				MX6QDL_PAD_GPIO_6__GPIO1_IO06	0x1b0b0
-				MX6QDL_PAD_GPIO_7__GPIO1_IO07	0x1b0b0
-				MX6QDL_PAD_GPIO_8__GPIO1_IO08	0x1b0b0
-				MX6QDL_PAD_KEY_COL0__GPIO4_IO06	0x1b0b0
-			>;
-		};
-
-		pinctrl_gpmi_nand: gpminandgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CLE__NAND_CLE     0xb0b1
-				MX6QDL_PAD_NANDF_ALE__NAND_ALE     0xb0b1
-				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B   0xb0b1
-				MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
-				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B   0xb0b1
-				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B   0xb0b1
-				MX6QDL_PAD_SD4_CMD__NAND_RE_B      0xb0b1
-				MX6QDL_PAD_SD4_CLK__NAND_WE_B      0xb0b1
-				MX6QDL_PAD_NANDF_D0__NAND_DATA00   0xb0b1
-				MX6QDL_PAD_NANDF_D1__NAND_DATA01   0xb0b1
-				MX6QDL_PAD_NANDF_D2__NAND_DATA02   0xb0b1
-				MX6QDL_PAD_NANDF_D3__NAND_DATA03   0xb0b1
-				MX6QDL_PAD_NANDF_D4__NAND_DATA04   0xb0b1
-				MX6QDL_PAD_NANDF_D5__NAND_DATA05   0xb0b1
-				MX6QDL_PAD_NANDF_D6__NAND_DATA06   0xb0b1
-				MX6QDL_PAD_NANDF_D7__NAND_DATA07   0xb0b1
-				MX6QDL_PAD_SD4_DAT0__NAND_DQS      0x00b1
-			>;
-		};
-
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D29__GPIO3_IO29   0x10
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
-				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
-				MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
-			>;
-		};
-
-		pinctrl_ipu_disp: ipudisp1grp {
-			fsl,pins = <
-				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
-				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x10
-				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
-				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
-				MX6QDL_PAD_DI0_PIN4__GPIO4_IO20			0x20000
-				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
-				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
-				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
-				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
-				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
-				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
-				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
-				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
-				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
-				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
-				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
-				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
-				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
-				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
-				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
-				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
-				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
-				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
-				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
-				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
-				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
-				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
-				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
-				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
-				>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
-				MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
-			>;
-		};
-
-		pinctrl_uart4: uart4grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
-				MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
-				MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
-				MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
-			>;
-		};
-
-		pinctrl_uart5: uart5grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1
-				MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
-			>;
-		};
-
-		pinctrl_usdhc1: usdhc1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
-				MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
-				MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
-				MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
-				MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
-				MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
-				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
-				MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x1b0b0
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi b/arch/arm/boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi
deleted file mode 100644
index 7672fbfc29be..000000000000
--- a/arch/arm/boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi
+++ /dev/null
@@ -1,44 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-/*
- * Copyright 2020 Toradex
- */
-
-&iomuxc {
-	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x170b1
-			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x100b1
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170b1
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170b1
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170b1
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170b1
-		>;
-	};
-
-	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x170f1
-			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x100f1
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f1
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f1
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f1
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f1
-		>;
-	};
-};
-
-/* Colibri MMC */
-&usdhc1 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>;
-	pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_mmc_cd>;
-	pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_mmc_cd>;
-	vmmc-supply = <&reg_module_3v3>;
-	vqmmc-supply = <&vgen3_reg>;
-	wakeup-source;
-	keep-power-in-suspend;
-	sd-uhs-sdr12;
-	sd-uhs-sdr25;
-	sd-uhs-sdr50;
-	sd-uhs-sdr104;
-};
diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
deleted file mode 100644
index 4e2a309c93fa..000000000000
--- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
+++ /dev/null
@@ -1,864 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-/*
- * Copyright 2014-2020 Toradex
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Toradex Colibri iMX6DL/S Module";
-	compatible = "toradex,colibri_imx6dl", "fsl,imx6dl";
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_bl_on>;
-		pwms = <&pwm3 0 5000000>;
-		enable-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* Colibri BL_ON */
-		status = "disabled";
-	};
-
-	reg_module_3v3: regulator-module-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "+V3.3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_module_3v3_audio: regulator-module-3v3-audio {
-		compatible = "regulator-fixed";
-		regulator-name = "+V3.3_AUDIO";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_usb_host_vbus: regulator-usb-host-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_regulator_usbh_pwr>;
-		regulator-name = "usb_host_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; /* USBH_PEN */
-		status = "disabled";
-	};
-
-	sound {
-		compatible = "fsl,imx-audio-sgtl5000";
-		model = "imx6dl-colibri-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"Headphone Jack", "HP_OUT",
-			"LINE_IN", "Line In Jack",
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias";
-		mux-int-port = <1>;
-		mux-ext-port = <5>;
-	};
-
-	/* Optional S/PDIF in on SODIMM 88 and out on SODIMM 90, 137 or 168 */
-	sound_spdif: sound-spdif {
-		compatible = "fsl,imx-audio-spdif";
-		model = "imx-spdif";
-		spdif-controller = <&spdif>;
-		spdif-in;
-		spdif-out;
-		status = "disabled";
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux &pinctrl_mic_gnd>;
-	status = "okay";
-};
-
-/* Optional on SODIMM 55/63 */
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	status = "disabled";
-};
-
-/* Optional on SODIMM 178/188 */
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	status = "disabled";
-};
-
-/* Colibri SSP */
-&ecspi4 {
-	cs-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi4>;
-	status = "disabled";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy: ethernet-phy@0 {
-			reg = <0>;
-			micrel,led-mode = <0>;
-		};
-	};
-};
-
-&hdmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hdmi_ddc>;
-	status = "disabled";
-};
-
-/*
- * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
- * touch screen controller
- */
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	pinctrl-0 = <&pinctrl_i2c2_gpio>;
-	scl-gpios = <&gpio2 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio3 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-
-	pmic: pfuze100@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* vgen1: unused */
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/*
-			 * +V3.3_1.8_SD1 coming off VGEN3 and supplying
-			 * the i.MX 6 NVCC_SD1.
-			 */
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-
-	codec: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_module_3v3_audio>;
-		VDDIO-supply = <&reg_module_3v3>;
-		VDDD-supply = <&vgen4_reg>;
-		lrclk-strength = <3>;
-	};
-
-	/* STMPE811 touch screen controller */
-	stmpe811@41 {
-		compatible = "st,stmpe811";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_touch_int>;
-		reg = <0x41>;
-		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-parent = <&gpio6>;
-		interrupt-controller;
-		id = <0>;
-		blocks = <0x5>;
-		irq-trigger = <0x1>;
-		/* 3.25 MHz ADC clock speed */
-		st,adc-freq = <1>;
-		/* 12-bit ADC */
-		st,mod-12b = <1>;
-		/* internal ADC reference */
-		st,ref-sel = <0>;
-		/* ADC converstion time: 80 clocks */
-		st,sample-time = <4>;
-
-		stmpe_touchscreen {
-			compatible = "st,stmpe-ts";
-			/* 8 sample average control */
-			st,ave-ctrl = <3>;
-			/* 7 length fractional part in z */
-			st,fraction-z = <7>;
-			/*
-			 * 50 mA typical 80 mA max touchscreen drivers
-			 * current limit value
-			 */
-			st,i-drive = <1>;
-			/* 1 ms panel driver settling time */
-			st,settling = <3>;
-			/* 5 ms touch detect interrupt delay */
-			st,touch-det-delay = <5>;
-		};
-
-		stmpe_adc {
-			compatible = "st,stmpe-adc";
-			/* forbid to use ADC channels 3-0 (touch) */
-			st,norequest-mask = <0x0F>;
-		};
-	};
-};
-
-/*
- * I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board)
- */
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	pinctrl-1 = <&pinctrl_i2c3_gpio>;
-	scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "disabled";
-};
-
-/* Colibri PWM<B> */
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "disabled";
-};
-
-/* Colibri PWM<D> */
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>;
-	status = "disabled";
-};
-
-/* Colibri PWM<A> */
-&pwm3 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "disabled";
-};
-
-/* Colibri PWM<C> */
-&pwm4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "disabled";
-};
-
-/* Optional S/PDIF out on SODIMM 137 */
-&spdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spdif>;
-	status = "disabled";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-/* Colibri UART_A */
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>;
-	fsl,dte-mode;
-	uart-has-rtscts;
-	status = "disabled";
-};
-
-/* Colibri UART_B */
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2_dte>;
-	fsl,dte-mode;
-	uart-has-rtscts;
-	status = "disabled";
-};
-
-/* Colibri UART_C */
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3_dte>;
-	fsl,dte-mode;
-	status = "disabled";
-};
-
-&usbotg {
-	disable-over-current;
-	dr_mode = "peripheral";
-	status = "disabled";
-};
-
-/* Colibri MMC */
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>;
-	cd-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* MMCD */
-	disable-wp;
-	vqmmc-supply = <&reg_module_3v3>;
-	bus-width = <4>;
-	no-1-8-v;
-	status = "disabled";
-};
-
-/* eMMC */
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	vqmmc-supply = <&reg_module_3v3>;
-	bus-width = <8>;
-	no-1-8-v;
-	non-removable;
-	status = "okay";
-};
-
-&weim {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_weim_sram  &pinctrl_weim_cs0
-		     &pinctrl_weim_cs1   &pinctrl_weim_cs2
-		     &pinctrl_weim_rdnwr &pinctrl_weim_npwe>;
-	#address-cells = <2>;
-	#size-cells = <1>;
-	status = "disabled";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh_oc_1>;
-
-	pinctrl_audmux: audmuxgrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__AUD5_TXC	0x130b0
-			MX6QDL_PAD_KEY_ROW0__AUD5_TXD	0x130b0
-			MX6QDL_PAD_KEY_COL1__AUD5_TXFS	0x130b0
-			MX6QDL_PAD_KEY_ROW1__AUD5_RXD	0x130b0
-			/* SGTL5000 sys_mclk */
-			MX6QDL_PAD_GPIO_0__CCM_CLKO1	0x000b0
-		>;
-	};
-
-	pinctrl_cam_mclk: cammclkgrp {
-		fsl,pins = <
-			/* Parallel Camera CAM sys_mclk */
-			MX6QDL_PAD_NANDF_CS2__CCM_CLKO2	0x00b0
-		>;
-	};
-
-	pinctrl_ecspi4: ecspi4grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D22__ECSPI4_MISO	0x100b1
-			MX6QDL_PAD_EIM_D28__ECSPI4_MOSI	0x100b1
-			MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
-			/* SPI CS */
-			MX6QDL_PAD_EIM_A25__GPIO5_IO02	0x000b1
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
-			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
-			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
-			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
-			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
-			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
-			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK     ((1<<30) | 0x1b0b0)
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX		0x1b0b0
-			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX		0x1b0b0
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b0b0
-			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b0b0
-		>;
-	};
-
-	pinctrl_gpio_bl_on: gpioblon {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D26__GPIO3_IO26		0x1b0b0
-		>;
-	};
-
-	pinctrl_gpio_keys: gpiokeys {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x130b0
-		>;
-	};
-
-	pinctrl_hdmi_ddc: hdmiddcgrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL 0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
-			MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2_gpio: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x4001b8b1
-			MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3_gpio: i2c3gpiogrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x4001b8b1
-			MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b8b1
-		>;
-	};
-
-	pinctrl_ipu1_csi0: ipu1csi0grp { /* Parallel Camera */
-		fsl,pins = <
-			MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12	0xb0b1
-			MX6QDL_PAD_EIM_A18__IPU1_CSI1_DATA13	0xb0b1
-			MX6QDL_PAD_EIM_A19__IPU1_CSI1_DATA14	0xb0b1
-			MX6QDL_PAD_EIM_A20__IPU1_CSI1_DATA15	0xb0b1
-			MX6QDL_PAD_EIM_A21__IPU1_CSI1_DATA16	0xb0b1
-			MX6QDL_PAD_EIM_A22__IPU1_CSI1_DATA17	0xb0b1
-			MX6QDL_PAD_EIM_A23__IPU1_CSI1_DATA18	0xb0b1
-			MX6QDL_PAD_EIM_A24__IPU1_CSI1_DATA19	0xb0b1
-			MX6QDL_PAD_EIM_D17__IPU1_CSI1_PIXCLK	0xb0b1
-			MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC	0xb0b1
-			MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC	0xb0b1
-			/* Disable PWM pins on camera interface */
-			MX6QDL_PAD_SD4_DAT1__GPIO2_IO09		0x40
-			MX6QDL_PAD_GPIO_1__GPIO1_IO01		0x40
-		>;
-	};
-
-	pinctrl_ipu1_lcdif: ipu1lcdifgrp {
-		fsl,pins = <
-			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0xa1
-			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0xa1
-			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0xa1
-			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0xa1
-			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0xa1
-			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0xa1
-			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0xa1
-			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0xa1
-			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0xa1
-			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0xa1
-			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0xa1
-			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0xa1
-			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0xa1
-			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0xa1
-			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0xa1
-			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0xa1
-			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0xa1
-			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0xa1
-			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0xa1
-			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0xa1
-			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0xa1
-			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0xa1
-		>;
-	};
-
-	pinctrl_mic_gnd: gpiomicgnd {
-		fsl,pins = <
-			/* Controls Mic GND, PU or '1' pull Mic GND to GND */
-			MX6QDL_PAD_RGMII_TD1__GPIO6_IO21 0x1b0b0
-		>;
-	};
-
-	pinctrl_mmc_cd: gpiommccd {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_D5__GPIO2_IO05	0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_9__PWM1_OUT	0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm2: pwm2grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__PWM2_OUT	0x1b0b1
-			MX6QDL_PAD_EIM_A21__GPIO2_IO17	0x00040
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT1__PWM3_OUT	0x1b0b1
-			MX6QDL_PAD_EIM_A22__GPIO2_IO16	0x00040
-		>;
-	};
-
-	pinctrl_pwm4: pwm4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT2__PWM4_OUT	0x1b0b1
-		>;
-	};
-
-	pinctrl_regulator_usbh_pwr: gpioregusbhpwrgrp {
-		fsl,pins = <
-			/* USBH_EN */
-			MX6QDL_PAD_EIM_D31__GPIO3_IO31	0x0f058
-		>;
-	};
-
-	pinctrl_usbh_oc_1: usbhoc1grp {
-		fsl,pins = <
-			/* USBH_OC */
-			MX6QDL_PAD_EIM_D30__GPIO3_IO30		0x1b0b0
-		>;
-	};
-
-	pinctrl_spdif: spdifgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0
-		>;
-	};
-
-	pinctrl_touch_int: gpiotouchintgrp {
-		fsl,pins = <
-			/* STMPE811 interrupt */
-			MX6QDL_PAD_RGMII_TD0__GPIO6_IO20 0x1b0b0
-		>;
-	};
-
-	pinctrl_uart1_dce: uart1dcegrp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
-			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
-		>;
-	};
-
-	/* DTE mode */
-	pinctrl_uart1_dte: uart1dtegrp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x1b0b1
-			MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x1b0b1
-			MX6QDL_PAD_EIM_D19__UART1_RTS_B	0x1b0b1
-			MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x1b0b1
-		>;
-	};
-
-	/* Additional DTR, DSR, DCD */
-	pinctrl_uart1_ctrl: uart1ctrlgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0
-			MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0
-			MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0
-		>;
-	};
-
-	pinctrl_uart2_dte: uart2dtegrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_DAT6__UART2_RTS_B	0x1b0b1
-			MX6QDL_PAD_SD4_DAT5__UART2_CTS_B	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart3_dte: uart3dtegrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CLK__UART3_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_CMD__UART3_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_usbc_det: usbcdetgrp {
-		fsl,pins = <
-			/* USBC_DET */
-			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
-			/* USBC_DET_EN */
-			MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26	0x0f058
-			/* USBC_DET_OVERWRITE */
-			MX6QDL_PAD_RGMII_RXC__GPIO6_IO30	0x0f058
-		>;
-	};
-
-	pinctrl_usbc_id_1: usbc_id-1 {
-		fsl,pins = <
-			/* USBC_ID */
-			MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x17071
-			MX6QDL_PAD_SD1_CLK__SD1_CLK	0x10071
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0	0x17071
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1	0x17071
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2	0x17071
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3	0x17071
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
-			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10059
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17059
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17059
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17059
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17059
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4	0x17059
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5	0x17059
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6	0x17059
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7	0x17059
-			/* eMMC reset */
-			MX6QDL_PAD_SD3_RST__SD3_RESET	0x17059
-		>;
-	};
-
-	pinctrl_weim_cs0: weimcs0grp {
-		fsl,pins = <
-			/* nEXT_CS0 */
-			MX6QDL_PAD_EIM_CS0__EIM_CS0_B	0xb0b1
-		>;
-	};
-
-	pinctrl_weim_cs1: weimcs1grp {
-		fsl,pins = <
-			/* nEXT_CS1 */
-			MX6QDL_PAD_EIM_CS1__EIM_CS1_B	0xb0b1
-		>;
-	};
-
-	pinctrl_weim_cs2: weimcs2grp {
-		fsl,pins = <
-			/* nEXT_CS2 */
-			MX6QDL_PAD_SD2_DAT1__EIM_CS2_B	0xb0b1
-		>;
-	};
-
-	pinctrl_weim_sram: weimsramgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_OE__EIM_OE_B		0xb0b1
-			MX6QDL_PAD_EIM_RW__EIM_RW		0xb0b1
-			/* Data */
-			MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00	0x1b0b0
-			MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT4__EIM_DATA02	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT5__EIM_DATA03	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT6__EIM_DATA04	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT7__EIM_DATA05	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT8__EIM_DATA06	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT9__EIM_DATA07	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT12__EIM_DATA08	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT13__EIM_DATA09	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT14__EIM_DATA10	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT15__EIM_DATA11	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT16__EIM_DATA12	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT17__EIM_DATA13	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT18__EIM_DATA14	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT19__EIM_DATA15	0x1b0b0
-			/* Address */
-			MX6QDL_PAD_EIM_DA15__EIM_AD15		0xb0b1
-			MX6QDL_PAD_EIM_DA14__EIM_AD14		0xb0b1
-			MX6QDL_PAD_EIM_DA13__EIM_AD13		0xb0b1
-			MX6QDL_PAD_EIM_DA12__EIM_AD12		0xb0b1
-			MX6QDL_PAD_EIM_DA11__EIM_AD11		0xb0b1
-			MX6QDL_PAD_EIM_DA10__EIM_AD10		0xb0b1
-			MX6QDL_PAD_EIM_DA9__EIM_AD09		0xb0b1
-			MX6QDL_PAD_EIM_DA8__EIM_AD08		0xb0b1
-			MX6QDL_PAD_EIM_DA7__EIM_AD07		0xb0b1
-			MX6QDL_PAD_EIM_DA6__EIM_AD06		0xb0b1
-			MX6QDL_PAD_EIM_DA5__EIM_AD05		0xb0b1
-			MX6QDL_PAD_EIM_DA4__EIM_AD04		0xb0b1
-			MX6QDL_PAD_EIM_DA3__EIM_AD03		0xb0b1
-			MX6QDL_PAD_EIM_DA2__EIM_AD02		0xb0b1
-			MX6QDL_PAD_EIM_DA1__EIM_AD01		0xb0b1
-			MX6QDL_PAD_EIM_DA0__EIM_AD00		0xb0b1
-		>;
-	};
-
-	pinctrl_weim_rdnwr: weimrdnwr {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_CLK__GPIO1_IO10		0x0040
-			MX6QDL_PAD_RGMII_TD3__GPIO6_IO23	0x130b0
-		>;
-	};
-
-	pinctrl_weim_npwe: weimnpwe {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_DAT3__GPIO1_IO12		0x0040
-			MX6QDL_PAD_RGMII_TD2__GPIO6_IO22	0x130b0
-		>;
-	};
-
-	/* ADDRESS[16:18] [25] used as GPIO */
-	pinctrl_weim_gpio_1: weimgpio-1 {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
-			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
-			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0
-			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b0b0
-			MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x1b0b0
-			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x1b0b0
-			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b0b0
-			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x1b0b0
-			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x1b0b0
-			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
-		>;
-	};
-
-	/* ADDRESS[19:24] used as GPIO */
-	pinctrl_weim_gpio_2: weimgpio-2 {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
-			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0
-			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b0b0
-			MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x1b0b0
-			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x1b0b0
-			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b0b0
-			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x1b0b0
-			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x1b0b0
-			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
-		>;
-	};
-
-	/* DATA[16:31] used as GPIO */
-	pinctrl_weim_gpio_3: weimgpio-3 {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_LBA__GPIO2_IO27		0x1b0b0
-			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0x1b0b0
-			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x1b0b0
-			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x1b0b0
-			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10	0x1b0b0
-			MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x1b0b0
-			MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09	0x1b0b0
-			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x1b0b0
-			MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x1b0b0
-			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
-			MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19	0x1b0b0
-			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x1b0b0
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0
-			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x1b0b0
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
-		>;
-	};
-
-	/* DQM[0:3] used as GPIO */
-	pinctrl_weim_gpio_4: weimgpio-4 {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0x1b0b0
-			MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x1b0b0
-			MX6QDL_PAD_SD2_DAT2__GPIO1_IO13		0x1b0b0
-			MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x1b0b0
-		>;
-	};
-
-	/* RDY used as GPIO */
-	pinctrl_weim_gpio_5: weimgpio-5 {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0x1b0b0
-		>;
-	};
-
-	/* ADDRESS[16] DATA[30] used as GPIO */
-	pinctrl_weim_gpio_6: weimgpio-6 {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
-			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
deleted file mode 100644
index 1e530d892b76..000000000000
--- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
+++ /dev/null
@@ -1,270 +0,0 @@
-/*
- * Copyright (C) 2014 Russell King
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	/* Will be filled by the bootloader */
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0>;
-	};
-
-	ir_recv: ir-receiver {
-		compatible = "gpio-ir-receiver";
-		gpios = <&gpio3 9 1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_cubox_i_ir>;
-	};
-
-	led-controller {
-		compatible = "pwm-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_cubox_i_pwm1>;
-
-		led-1 {
-			active-low;
-			label = "imx6:red:front";
-			max-brightness = <248>;
-			pwms = <&pwm1 0 50000>;
-		};
-	};
-
-	v_5v0: regulator-v-5v0 {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-max-microvolt = <5000000>;
-		regulator-min-microvolt = <5000000>;
-		regulator-name = "v_5v0";
-	};
-
-	v_usb2: regulator-v-usb2 {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_cubox_i_usbh1_vbus>;
-		regulator-max-microvolt = <5000000>;
-		regulator-min-microvolt = <5000000>;
-		regulator-name = "v_usb2";
-		vin-supply = <&v_5v0>;
-	};
-
-	v_usb1: regulator-v-usb1 {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_cubox_i_usbotg_vbus>;
-		regulator-max-microvolt = <5000000>;
-		regulator-min-microvolt = <5000000>;
-		regulator-name = "v_usb1";
-		vin-supply = <&v_5v0>;
-	};
-
-	sound-spdif {
-		compatible = "fsl,imx-audio-spdif";
-		model = "Integrated SPDIF";
-		/* IMX6 doesn't implement this yet */
-		spdif-controller = <&spdif>;
-		spdif-out;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&pinctrl_gpio_key>;
-		pinctrl-names = "default";
-
-		button_0 {
-			label = "Button 0";
-			gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_0>;
-		};
-	};
-};
-
-&hdmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cubox_i_hdmi>;
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cubox_i_i2c2>;
-	status = "okay";
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cubox_i_i2c3>;
-
-	status = "okay";
-
-	rtc@68 {
-		compatible = "nxp,pcf8523";
-		reg = <0x68>;
-	};
-};
-
-&iomuxc {
-	cubox_i {
-		pinctrl_cubox_i_hdmi: cubox-i-hdmi {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
-			>;
-		};
-
-		pinctrl_cubox_i_i2c2: cubox-i-i2c2 {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-			>;
-		};
-
-		pinctrl_cubox_i_i2c3: cubox-i-i2c3 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
-				MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
-			>;
-		};
-
-		pinctrl_cubox_i_ir: cubox-i-ir {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000
-			>;
-		};
-
-		pinctrl_cubox_i_pwm1: cubox-i-pwm1-front-led {
-			fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0>;
-		};
-
-		pinctrl_cubox_i_spdif: cubox-i-spdif {
-			fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
-		};
-
-		pinctrl_cubox_i_usbh1: cubox-i-usbh1 {
-			fsl,pins = <MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b0>;
-		};
-
-		pinctrl_cubox_i_usbh1_vbus: cubox-i-usbh1-vbus {
-			fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x4001b0b0>;
-		};
-
-		pinctrl_cubox_i_usbotg: cubox-i-usbotg {
-			/*
-			 * The Cubox-i pulls ID low, but as it's pointless
-			 * leaving it as a pull-up, even if it is just 10uA.
-			 */
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059
-				MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
-			>;
-		};
-
-		pinctrl_cubox_i_usbotg_vbus: cubox-i-usbotg-vbus {
-			fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x4001b0b0>;
-		};
-
-		pinctrl_cubox_i_usdhc2_aux: cubox-i-usdhc2-aux {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04    0x1f071
-				MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b071
-			>;
-		};
-
-		pinctrl_cubox_i_usdhc2: cubox-i-usdhc2 {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
-			>;
-		};
-
-		pinctrl_gpio_key: gpio-key {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_DA8__GPIO3_IO08	0x17059
-			>;
-		};
-	};
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-	status = "okay";
-};
-
-&spdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cubox_i_spdif>;
-	status = "okay";
-};
-
-&usbh1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cubox_i_usbh1>;
-	vbus-supply = <&v_usb2>;
-	status = "okay";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cubox_i_usbotg>;
-	vbus-supply = <&v_usb1>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cubox_i_usdhc2_aux &pinctrl_cubox_i_usdhc2>;
-	vmmc-supply = <&vcc_3v3>;
-	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&vcc_3v3 {
-	vin-supply = <&v_5v0>;
-};
diff --git a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
deleted file mode 100644
index 648f5fcb72e6..000000000000
--- a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
+++ /dev/null
@@ -1,201 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		dummy_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "dummy-supply";
-		};
-
-		reg_usb_otg_vbus: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 0>;
-			enable-active-high;
-		};
-	};
-
-	chosen {
-		stdout-path = &uart1;
-	};
-};
-
-&ecspi3 {
-	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi3>;
-	status = "okay";
-
-	flash: m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "sst,sst25vf040b", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	status = "okay";
-	phy-mode = "rgmii";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6qdl-dfi-fs700-m60 {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000
-				MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x80000000 /* PMIC irq */
-				MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x80000000 /* MAX11801 irq */
-				MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x000030b0 /* Backlight enable */
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D16__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-				MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000 /* card detect */
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
-				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
-				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
-				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
-			>;
-		};
-
-		pinctrl_ecspi3: ecspi3grp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
-				MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
-				MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
-				MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */
-			>;
-		};
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usdhc2 { /* module slot */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&usdhc3 { /* baseboard slot */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-};
-
-&usdhc4 { /* eMMC */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
deleted file mode 100644
index 2ffb21dd89f2..000000000000
--- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
+++ /dev/null
@@ -1,368 +0,0 @@
-/*
- * Copyright (C) 2013,2014 Russell King
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-#include <dt-bindings/sound/fsl-imx-audmux.h>
-
-/ {
-	/* Will be filled by the bootloader */
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0>;
-	};
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	ir_recv: ir-receiver {
-		compatible = "gpio-ir-receiver";
-		gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hummingboard_gpio3_5>;
-	};
-
-	v_3v2: regulator-v-3v2 {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-max-microvolt = <3300000>;
-		regulator-min-microvolt = <3300000>;
-		regulator-name = "v_3v2";
-		vin-supply = <&v_5v0>;
-	};
-
-	v_5v0: regulator-v-5v0 {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-max-microvolt = <5000000>;
-		regulator-min-microvolt = <5000000>;
-		regulator-name = "v_5v0";
-	};
-
-	v_sd: regulator-v-sd {
-		compatible = "regulator-fixed";
-		gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hummingboard_vmmc>;
-		regulator-boot-on;
-		regulator-max-microvolt = <3300000>;
-		regulator-min-microvolt = <3300000>;
-		regulator-name = "v_sd";
-		startup-delay-us = <1000>;
-		vin-supply = <&v_3v2>;
-	};
-
-	v_usb2: regulator-v-usb2 {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hummingboard_usbh1_vbus>;
-		regulator-max-microvolt = <5000000>;
-		regulator-min-microvolt = <5000000>;
-		regulator-name = "v_usb2";
-		vin-supply = <&v_5v0>;
-	};
-
-	v_usb1: regulator-v-usb1 {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hummingboard_usbotg_vbus>;
-		regulator-max-microvolt = <5000000>;
-		regulator-min-microvolt = <5000000>;
-		regulator-name = "v_usb1";
-		vin-supply = <&v_5v0>;
-	};
-
-	audio: sound-sgtl5000 {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "On-board Codec";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&sound_codec>;
-		simple-audio-card,frame-master = <&sound_codec>;
-		simple-audio-card,widgets =
-			"Microphone", "Headphone Jack",
-			"Headphone", "Headphone Jack";
-		simple-audio-card,routing =
-			"MIC_IN", "Headphone Jack",
-			"Headphone Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-
-		sound_cpu: simple-audio-card,cpu {
-			sound-dai = <&ssi1>;
-		};
-
-		sound_codec: simple-audio-card,codec {
-			sound-dai = <&sgtl5000>;
-		};
-	};
-
-	sound-spdif {
-		compatible = "fsl,imx-audio-spdif";
-		model = "On-board SPDIF";
-		/* IMX6 doesn't implement this yet */
-		spdif-controller = <&spdif>;
-		spdif-out;
-	};
-};
-
-&audmux {
-	status = "okay";
-
-	ssi1 {
-		fsl,audmux-port = <0>;
-		fsl,port-config = <
-			(IMX_AUDMUX_V2_PTCR_SYN |
-			 IMX_AUDMUX_V2_PTCR_TFSEL(4) |
-			 IMX_AUDMUX_V2_PTCR_TCSEL(4) |
-			 IMX_AUDMUX_V2_PTCR_TFSDIR |
-			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
-			 IMX_AUDMUX_V2_PDCR_RXDSEL(4)
-		>;
-	};
-
-	pins5 {
-		fsl,audmux-port = <4>;
-		fsl,port-config = <
-			IMX_AUDMUX_V2_PTCR_SYN
-			IMX_AUDMUX_V2_PDCR_RXDSEL(0)
-		>;
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard_flexcan1>;
-	status = "okay";
-};
-
-&hdmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard_hdmi>;
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard_i2c1>;
-	status = "okay";
-
-	/* Pro baseboard model */
-	rtc@68 {
-		compatible = "nxp,pcf8523";
-		reg = <0x68>;
-	};
-
-	/* Pro baseboard model */
-	sgtl5000: codec@a {
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		compatible = "fsl,sgtl5000";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hummingboard_sgtl5000>;
-		#sound-dai-cells = <0>;
-		reg = <0x0a>;
-		VDDA-supply = <&v_3v2>;
-		VDDIO-supply = <&v_3v2>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard_i2c2>;
-	status = "okay";
-};
-
-&iomuxc {
-	hummingboard {
-		pinctrl_hummingboard_flexcan1: hummingboard-flexcan1 {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x80000000
-				MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x80000000
-			>;
-		};
-
-		pinctrl_hummingboard_gpio3_5: hummingboard-gpio3_5 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x1b0b1
-			>;
-		};
-
-		pinctrl_hummingboard_hdmi: hummingboard-hdmi {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
-			>;
-		};
-
-		pinctrl_hummingboard_i2c1: hummingboard-i2c1 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
-			>;
-		};
-
-		pinctrl_hummingboard_i2c2: hummingboard-i2c2 {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-			>;
-		};
-
-		pinctrl_hummingboard_pcie_reset: hummingboard-pcie-reset {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x1b0b1
-			>;
-		};
-
-		pinctrl_hummingboard_pwm1: pwm1grp {
-			fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1>;
-		};
-
-		pinctrl_hummingboard_sgtl5000: hummingboard-sgtl5000 {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0
-				MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0
-				MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0
-				MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0
-				MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
-			>;
-		};
-
-		pinctrl_hummingboard_spdif: hummingboard-spdif {
-			fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
-		};
-
-		pinctrl_hummingboard_usbh1_vbus: hummingboard-usbh1-vbus {
-			fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>;
-		};
-
-		pinctrl_hummingboard_usbotg_id: hummingboard-usbotg-id {
-			/*
-			 * We want it pulled down for a fixed host connection.
-			 */
-			fsl,pins = <MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x13059>;
-		};
-
-		pinctrl_hummingboard_usbotg_vbus: hummingboard-usbotg-vbus {
-			fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>;
-		};
-
-		pinctrl_hummingboard_usdhc2_aux: hummingboard-usdhc2-aux {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04    0x1f071
-			>;
-		};
-
-		pinctrl_hummingboard_usdhc2: hummingboard-usdhc2 {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
-			>;
-		};
-		pinctrl_hummingboard_vmmc: hummingboard-vmmc {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0
-			>;
-		};
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard_pcie_reset>;
-	reset-gpio = <&gpio3 4 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pwm1 {
-	 pinctrl-names = "default";
-	 pinctrl-0 = <&pinctrl_hummingboard_pwm1>;
-	 status = "okay";
-};
-
-&pwm2 {
-	 pinctrl-names = "default";
-	 status = "okay";
-};
-
-&spdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard_spdif>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&usbh1 {
-	disable-over-current;
-	vbus-supply = <&v_usb2>;
-	status = "okay";
-};
-
-&usbotg {
-	disable-over-current;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>;
-	vbus-supply = <&v_usb1>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&pinctrl_hummingboard_usdhc2_aux
-		&pinctrl_hummingboard_usdhc2
-	>;
-	vmmc-supply = <&v_sd>;
-	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&vcc_3v3 {
-	vin-supply = <&v_3v2>;
-};
diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi
deleted file mode 100644
index eb1ad28946d3..000000000000
--- a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi
+++ /dev/null
@@ -1,577 +0,0 @@
-/*
- * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-#include <dt-bindings/sound/fsl-imx-audmux.h>
-
-/ {
-	/* Will be filled by the bootloader */
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0>;
-	};
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	ir_recv: ir-receiver {
-		compatible = "gpio-ir-receiver";
-		gpios = <&gpio7 9 GPIO_ACTIVE_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hummingboard2_gpio7_9>;
-		linux,rc-map-name = "rc-rc6-mce";
-	};
-
-	v_3v2: regulator-v-3v2 {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-max-microvolt = <3300000>;
-		regulator-min-microvolt = <3300000>;
-		regulator-name = "v_3v2";
-	};
-
-	v_5v0: regulator-v-5v0 {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-max-microvolt = <5000000>;
-		regulator-min-microvolt = <5000000>;
-		regulator-name = "v_5v0";
-	};
-
-	vcc_1p8: regulator-vcc-1p8 {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-max-microvolt = <1800000>;
-		regulator-min-microvolt = <1800000>;
-		regulator-name = "vcc_1p8";
-		vin-supply = <&v_3v2>;
-	};
-
-	v_sd: regulator-v-sd {
-		compatible = "regulator-fixed";
-		gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hummingboard2_vmmc>;
-		regulator-boot-on;
-		regulator-max-microvolt = <3300000>;
-		regulator-min-microvolt = <3300000>;
-		regulator-name = "v_sd";
-		startup-delay-us = <1000>;
-		vin-supply = <&v_3v2>;
-	};
-
-	v_usb1: regulator-v-usb1 {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hummingboard2_usbotg_vbus>;
-		regulator-always-on;
-		regulator-max-microvolt = <5000000>;
-		regulator-min-microvolt = <5000000>;
-		regulator-name = "v_usb1";
-		vin-supply = <&v_5v0>;
-	};
-
-	v_usb2: regulator-v-usb2 {
-		/* USB hub port 1 */
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hummingboard2_usbh1_vbus>;
-		regulator-always-on;
-		regulator-max-microvolt = <5000000>;
-		regulator-min-microvolt = <5000000>;
-		regulator-name = "v_usb2";
-		vin-supply = <&v_5v0>;
-	};
-
-	v_usb3: regulator-v-usb3 {
-		/* USB hub port 3 */
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hummingboard2_usbh2_vbus>;
-		regulator-always-on;
-		regulator-max-microvolt = <5000000>;
-		regulator-min-microvolt = <5000000>;
-		regulator-name = "v_usb3";
-		vin-supply = <&v_5v0>;
-	};
-
-	v_usb4: regulator-v-usb4 {
-		/* USB hub port 4 */
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio7 10 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hummingboard2_usbh3_vbus>;
-		regulator-always-on;
-		regulator-max-microvolt = <5000000>;
-		regulator-min-microvolt = <5000000>;
-		regulator-name = "v_usb4";
-		vin-supply = <&v_5v0>;
-	};
-
-	audio: sound-sgtl5000 {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "On-board Codec";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&sound_codec>;
-		simple-audio-card,frame-master = <&sound_codec>;
-		simple-audio-card,widgets =
-			"Microphone", "Mic Jack",
-			"Headphone", "Headphone Jack";
-		simple-audio-card,routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-
-		sound_cpu: simple-audio-card,cpu {
-			sound-dai = <&ssi1>;
-		};
-
-		sound_codec: simple-audio-card,codec {
-			sound-dai = <&sgtl5000>;
-		};
-	};
-};
-
-&audmux {
-	status = "okay";
-
-	ssi1 {
-		fsl,audmux-port = <0>;
-		fsl,port-config = <
-			(IMX_AUDMUX_V2_PTCR_SYN |
-			 IMX_AUDMUX_V2_PTCR_TFSEL(4) |
-			 IMX_AUDMUX_V2_PTCR_TCSEL(4) |
-			 IMX_AUDMUX_V2_PTCR_TFSDIR |
-			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
-			 IMX_AUDMUX_V2_PDCR_RXDSEL(4)
-		>;
-	};
-
-	pins5 {
-		fsl,audmux-port = <4>;
-		fsl,port-config = <
-			IMX_AUDMUX_V2_PTCR_SYN
-			IMX_AUDMUX_V2_PDCR_RXDSEL(0)
-		>;
-	};
-};
-
-&ecspi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard2_ecspi2>;
-	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&hdmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard2_hdmi>;
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard2_i2c1>;
-	status = "okay";
-
-	pcf8523: rtc@68 {
-		compatible = "nxp,pcf8523";
-		reg = <0x68>;
-	};
-
-	sgtl5000: codec@a {
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		compatible = "fsl,sgtl5000";
-		#sound-dai-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hummingboard2_sgtl5000>;
-		reg = <0x0a>;
-		VDDA-supply = <&v_3v2>;
-		VDDD-supply = <&vcc_1p8>;
-		VDDIO-supply = <&v_3v2>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard2_i2c2>;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard2_i2c3>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	hummingboard2 {
-		pinctrl_hog: hoggrp {
-		fsl,pins = <
-				/*
-				 * 36 pin headers GPIO description. The pins
-				 * numbering as following -
-				 *
-				 * 	3.2v	5v	74	75
-				 *	73	72	71	70
-				 *	69	68	67	66
-				 *
-				 *	77	78	79	76
-				 *	65	64	61	60
-				 *	53	52	51	50
-				 *	49	48	166	132
-				 *	95	94	90	91
-				 *	GND	54	24	204
-				 *
-				 * The GPIO numbers can be extracted using
-				 * signal name from below.
-				 * Example -
-				 * MX6QDL_PAD_EIM_DA10__GPIO3_IO10 is
-				 * GPIO(3,10) which is (3-1)*32+10 = gpio 74
-				 *
-				 * i.e. The mapping of GPIO(X,Y) to Linux gpio
-				 * number is : gpio number = (X-1) * 32 + Y
-				 */
-				/* DI1_PIN15 */
-				MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x400130b1
-				/* DI1_PIN02 */
-				MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x400130b1
-				/* DISP1_DATA00 */
-				MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x400130b1
-				/* DISP1_DATA01 */
-				MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x400130b1
-				/* DISP1_DATA02 */
-				MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x400130b1
-				/* DISP1_DATA03 */
-				MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x400130b1
-				/* DISP1_DATA04 */
-				MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x400130b1
-				/* DISP1_DATA05 */
-				MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x400130b1
-				/* DISP1_DATA06 */
-				MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x400130b1
-				/* DISP1_DATA07 */
-				MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x400130b1
-				/* DI1_D0_CS */
-				MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x400130b1
-				/* DI1_D1_CS */
-				MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x400130b1
-				/* DI1_PIN01 */
-				MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x400130b1
-				/* DI1_PIN03 */
-				MX6QDL_PAD_EIM_DA12__GPIO3_IO12 0x400130b1
-				/* DISP1_DATA08 */
-				MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x400130b1
-				/* DISP1_DATA09 */
-				MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x400130b1
-				/* DISP1_DATA10 */
-				MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x400130b1
-				/* DISP1_DATA11 */
-				MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x400130b1
-				/* DISP1_DATA12 */
-				MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x400130b1
-				/* DISP1_DATA13 */
-				MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x400130b1
-				/* DISP1_DATA14 */
-				MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x400130b1
-				/* DISP1_DATA15 */
-				MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x400130b1
-				/* DISP1_DATA16 */
-				MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x400130b1
-				/* DISP1_DATA17 */
-				MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x400130b1
-				/* DISP1_DATA18 */
-				MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x400130b1
-				/* DISP1_DATA19 */
-				MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x400130b1
-				/* DISP1_DATA20 */
-				MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x400130b1
-				/* DISP1_DATA21 */
-				MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x400130b1
-				/* DISP1_DATA22 */
-				MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x400130b1
-				/* DISP1_DATA23 */
-				MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x400130b1
-				/* DI1_DISP_CLK */
-				MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x400130b1
-				/* SPDIF_IN */
-				MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x400130b1
-				/* SPDIF_OUT */
-				MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x400130b1
-
-				/* MikroBUS GPIO pin number 10 */
-				MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x400130b1
-			>;
-		};
-
-		pinctrl_hummingboard2_ecspi2: hummingboard2-ecspi2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_OE__ECSPI2_MISO	0x100b1
-				MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI	0x100b1
-				MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK	0x100b1
-				MX6QDL_PAD_EIM_RW__GPIO2_IO26	0x000b1 /* CS */
-			>;
-		};
-
-		pinctrl_hummingboard2_gpio7_9: hummingboard2-gpio7_9 {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__GPIO7_IO09 0x80000000
-			>;
-		};
-
-		pinctrl_hummingboard2_hdmi: hummingboard2-hdmi {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
-			>;
-		};
-
-		pinctrl_hummingboard2_i2c1: hummingboard2-i2c1 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
-			>;
-		};
-
-		pinctrl_hummingboard2_i2c2: hummingboard2-i2c2 {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-			>;
-		};
-
-		pinctrl_hummingboard2_i2c3: hummingboard2-i2c3 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
-				MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
-			>;
-		};
-
-		pinctrl_hummingboard2_mipi: hummingboard2_mipi {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x4001b8b1
-				MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x4001b8b1
-				MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0
-			>;
-		};
-
-		pinctrl_hummingboard2_pcie_reset: hummingboard2-pcie-reset {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b1
-			>;
-		};
-
-		pinctrl_hummingboard2_pwm1: pwm1grp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1
-			>;
-		};
-
-		pinctrl_hummingboard2_pwm3: pwm3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
-			>;
-		};
-
-		pinctrl_hummingboard2_sgtl5000: hummingboard2-sgtl5000 {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0
-				MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0
-				MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0
-				MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0
-				MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
-			>;
-		};
-
-		pinctrl_hummingboard2_usbh1_vbus: hummingboard2-usbh1-vbus {
-			fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>;
-		};
-
-		pinctrl_hummingboard2_usbh2_vbus: hummingboard2-usbh2-vbus {
-			fsl,pins = <MX6QDL_PAD_SD4_DAT5__GPIO2_IO13 0x1b0b0>;
-		};
-
-		pinctrl_hummingboard2_usbh3_vbus: hummingboard2-usbh3-vbus {
-			fsl,pins = <MX6QDL_PAD_SD4_CLK__GPIO7_IO10 0x1b0b0>;
-		};
-
-		pinctrl_hummingboard2_usbotg_id: hummingboard2-usbotg-id {
-			/*
-			 * We want it pulled down for a fixed host connection.
-			 */
-			fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>;
-		};
-
-		pinctrl_hummingboard2_usbotg_vbus: hummingboard2-usbotg-vbus {
-			fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>;
-		};
-
-		pinctrl_hummingboard2_usdhc2_aux: hummingboard2-usdhc2-aux {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04    0x1f071
-				MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b071
-			>;
-		};
-
-		pinctrl_hummingboard2_usdhc2: hummingboard2-usdhc2 {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
-			>;
-		};
-
-		pinctrl_hummingboard2_usdhc2_100mhz: hummingboard2-usdhc2-100mhz {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x170b9
-				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x100b9
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x130b9
-			>;
-		};
-
-		pinctrl_hummingboard2_usdhc2_200mhz: hummingboard2-usdhc2-200mhz {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x170f9
-				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x100f9
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x130f9
-			>;
-		};
-
-		pinctrl_hummingboard2_vmmc: hummingboard2-vmmc {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0
-			>;
-		};
-
-		pinctrl_hummingboard2_uart3: hummingboard2-uart3 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D25__UART3_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D24__UART3_RX_DATA	0x40013000
-			>;
-		};
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard2_pcie_reset>;
-	reset-gpio = <&gpio2 11 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard2_pwm1>;
-	status = "okay";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard2_pwm3>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&usbh1 {
-	disable-over-current;
-	status = "okay";
-};
-
-&usbotg {
-	disable-over-current;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard2_usbotg_id>;
-	vbus-supply = <&v_usb1>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <
-		&pinctrl_hummingboard2_usdhc2_aux
-		&pinctrl_hummingboard2_usdhc2
-	>;
-	pinctrl-1 = <
-		&pinctrl_hummingboard2_usdhc2_aux
-		&pinctrl_hummingboard2_usdhc2_100mhz
-	>;
-	pinctrl-2 = <
-		&pinctrl_hummingboard2_usdhc2_aux
-		&pinctrl_hummingboard2_usdhc2_200mhz
-	>;
-	vmmc-supply = <&v_sd>;
-	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard2_uart3>;
-	status = "okay";
-};
-
-&vcc_3v3 {
-	vin-supply = <&v_3v2>;
-};
diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
deleted file mode 100644
index ac34709e9741..000000000000
--- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
+++ /dev/null
@@ -1,582 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Copyright 2015 Boundary Devices, Inc.
- */
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x20000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_2p5v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "2P5V";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-			regulator-always-on;
-		};
-
-		reg_3p3v: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usb_otg_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		reg_wlan_vmmc: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_wlan_vmmc>;
-			regulator-name = "reg_wlan_vmmc";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			gpio = <&gpio6 7 GPIO_ACTIVE_HIGH>;
-			startup-delay-us = <70000>;
-			enable-active-high;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		home {
-			label = "Home";
-			gpios = <&gpio7 13 IRQ_TYPE_LEVEL_LOW>;
-			linux,code = <102>;
-		};
-
-		back {
-			label = "Back";
-			gpios = <&gpio4 5 IRQ_TYPE_LEVEL_LOW>;
-			linux,code = <158>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_leds>;
-
-		j14-pin1 {
-			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
-			retain-state-suspended;
-			default-state = "off";
-		};
-
-		j14-pin3 {
-			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
-			retain-state-suspended;
-			default-state = "off";
-		};
-
-		j14-pins8-9 {
-			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
-			retain-state-suspended;
-			default-state = "off";
-		};
-
-		j46-pin2 {
-			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
-			retain-state-suspended;
-			default-state = "off";
-		};
-
-		j46-pin3 {
-			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
-			retain-state-suspended;
-			default-state = "off";
-		};
-	};
-
-	backlight-lcd {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		power-supply = <&reg_3p3v>;
-		status = "okay";
-	};
-
-	backlight_lvds0: backlight-lvds0 {
-		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		power-supply = <&reg_3p3v>;
-		status = "okay";
-	};
-
-	panel-lvds0 {
-		compatible = "hannstar,hsd100pxn1";
-		backlight = <&backlight_lvds0>;
-
-		port {
-			panel_in_lvds0: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx6dl-nit6xlite-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx6dl-nit6xlite-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <3>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	flash: m25p80@0 {
-		compatible = "microchip,sst25vf016b";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy>;
-	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
-	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
-			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
-	fsl,err006687-workaround-present;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy: ethernet-phy {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			txen-skew-ps = <0>;
-			txc-skew-ps = <3000>;
-			rxdv-skew-ps = <0>;
-			rxc-skew-ps = <3000>;
-			rxd0-skew-ps = <0>;
-			rxd1-skew-ps = <0>;
-			rxd2-skew-ps = <0>;
-			rxd3-skew-ps = <0>;
-			txd0-skew-ps = <0>;
-			txd1-skew-ps = <0>;
-			txd2-skew-ps = <0>;
-			txd3-skew-ps = <0>;
-		};
-	};
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	codec: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_sgtl5000>;
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	touchscreen@4 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
-		wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-	};
-
-	touchscreen@38 {
-		compatible = "edt,edt-ft5x06";
-		reg = <0x38>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
-		wakeup-source;
-	};
-
-	rtc@6f {
-		compatible = "isil,isl1208";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_rtc>;
-		reg = <0x6f>;
-		interrupts-extended = <&gpio2 26 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_j10>;
-	pinctrl-1 = <&pinctrl_j28>;
-
-	imx6dl-nit6xlite {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
-				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
-				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
-				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
-				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
-				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
-				MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x000b1
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				/* Phy reset */
-				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x0f0b0
-				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
-				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
-			>;
-		};
-
-		pinctrl_gpio_keys: gpio-keysgrp {
-			fsl,pins = <
-				/* Home Button: J14 pin 5 */
-				MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
-				/* Back Button: J14 pin 7 */
-				MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL	0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA	0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_5__I2C3_SCL	0x4001b8b1
-				MX6QDL_PAD_GPIO_16__I2C3_SDA	0x4001b8b1
-				/* Touch IRQ: J7 pin 4 */
-				MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x1b0b0
-				/* tcs2004 IRQ */
-				MX6QDL_PAD_EIM_LBA__GPIO2_IO27	0x1b0b0
-				/* tsc2004 reset */
-				MX6QDL_PAD_KEY_COL2__GPIO4_IO10	0x0b0b0
-			>;
-		};
-
-		pinctrl_j10: j10grp {
-			fsl,pins = <
-				/* Broadcom WiFi module pins */
-				MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x1b0b0
-				MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
-				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
-				MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
-				MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09	0x0b0b0
-				MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x1b0b0
-				MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT	0x000b0
-			>;
-		};
-
-		pinctrl_j28: j28grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0
-			>;
-		};
-
-		pinctrl_leds: ledsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x0b0b0
-				MX6QDL_PAD_GPIO_3__GPIO1_IO03		0x0b0b0
-				MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x030b0
-				MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x0b0b0
-				MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0b0b0
-			>;
-		};
-
-		pinctrl_pwm1: pwm1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT3__PWM1_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm3: pwm3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm4: pwm4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_wlan_vmmc: wlan-vmmcgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x030b0
-			>;
-		};
-
-		pinctrl_rtc: rtcgrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x1b0b0
-			>;
-		};
-
-		pinctrl_sgtl5000: sgtl5000grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x000b0
-				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b0
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
-				MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-				MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x1b0b0
-				/* power enable, high active */
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x000b0
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
-			>;
-		};
-	};
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in_lvds0>;
-			};
-		};
-	};
-};
-
-&pcie {
-	status = "okay";
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&pwm4 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	bus-width = <4>;
-	non-removable;
-	vmmc-supply = <&reg_3p3v>;
-	vqmmc-supply = <&reg_wlan_vmmc>;
-	cap-power-off-card;
-	keep-power-in-suspend;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
deleted file mode 100644
index c96f4d7e1e0d..000000000000
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
+++ /dev/null
@@ -1,848 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Copyright 2015 Boundary Devices, Inc.
- */
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0xF0000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_1p8v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "1P8V";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		reg_2p5v: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "2P5V";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-			regulator-always-on;
-		};
-
-		reg_3p3v: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usb_otg_vbus: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		reg_usb_h1_vbus: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usbh1>;
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		reg_wlan_vmmc: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_wlan_vmmc>;
-			regulator-name = "reg_wlan_vmmc";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
-			startup-delay-us = <70000>;
-			enable-active-high;
-		};
-
-		reg_can_xcvr: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			regulator-name = "CAN XCVR";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_can_xcvr>;
-			gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		power {
-			label = "Power Button";
-			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-
-		menu {
-			label = "Menu";
-			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_MENU>;
-		};
-
-		home {
-			label = "Home";
-			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_HOME>;
-		};
-
-		back {
-			label = "Back";
-			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_BACK>;
-		};
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-	};
-
-	i2c2mux {
-		compatible = "i2c-mux-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c2mux>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		mux-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH
-			     &gpio4 15 GPIO_ACTIVE_HIGH>;
-		i2c-parent = <&i2c2>;
-		idle-state = <0>;
-
-		i2c2mux@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c2mux@2 {
-			reg = <2>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-
-	i2c3mux {
-		compatible = "i2c-mux-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c3mux>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		mux-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
-		i2c-parent = <&i2c3>;
-		idle-state = <0>;
-
-		i2c3mux@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		speaker-enable {
-			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
-			retain-state-suspended;
-			default-state = "off";
-		};
-
-		ttymxc4-rs232 {
-			gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;
-			retain-state-suspended;
-			default-state = "on";
-		};
-	};
-
-	backlight_lcd: backlight-lcd {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		power-supply = <&reg_3p3v>;
-		status = "okay";
-	};
-
-	backlight_lvds0: backlight-lvds0 {
-		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		power-supply = <&reg_3p3v>;
-		status = "okay";
-	};
-
-	backlight_lvds1: backlight-lvds1 {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		power-supply = <&reg_3p3v>;
-		status = "okay";
-	};
-
-	lcd_display: disp0 {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interface-pix-fmt = "bgr666";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_j15>;
-		status = "okay";
-
-		port@0 {
-			reg = <0>;
-
-			lcd_display_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_display_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-	};
-
-	panel-lcd {
-		compatible = "okaya,rs800480t-7x0gp";
-		backlight = <&backlight_lcd>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-
-	panel-lvds0 {
-		compatible = "hannstar,hsd100pxn1";
-		backlight = <&backlight_lvds0>;
-
-		port {
-			panel_in_lvds0: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-
-	panel-lvds1 {
-		compatible = "hannstar,hsd100pxn1";
-		backlight = <&backlight_lvds1>;
-
-		port {
-			panel_in_lvds1: endpoint {
-				remote-endpoint = <&lvds1_out>;
-			};
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx6q-nitrogen6_max-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx6q-nitrogen6_max-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <3>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	xceiver-supply = <&reg_can_xcvr>;
-	status = "okay";
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	flash: m25p80@0 {
-		compatible = "microchip,sst25vf016b";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy>;
-	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
-	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
-			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
-	fsl,err006687-workaround-present;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy: ethernet-phy {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			txen-skew-ps = <0>;
-			txc-skew-ps = <3000>;
-			rxdv-skew-ps = <0>;
-			rxc-skew-ps = <3000>;
-			rxd0-skew-ps = <0>;
-			rxd1-skew-ps = <0>;
-			rxd2-skew-ps = <0>;
-			rxd3-skew-ps = <0>;
-			txd0-skew-ps = <0>;
-			txd1-skew-ps = <0>;
-			txd2-skew-ps = <0>;
-			txd3-skew-ps = <0>;
-		};
-	};
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	codec: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_sgtl5000>;
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-
-	rtc: rtc@68 {
-		compatible = "microcrystal,rv4162";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_rv4162>;
-		reg = <0x68>;
-		interrupts-extended = <&gpio4 6 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	touchscreen@4 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
-		wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-	};
-
-	touchscreen@38 {
-		compatible = "edt,edt-ft5x06";
-		reg = <0x38>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
-		wakeup-source;
-	};
-};
-
-&iomuxc {
-	imx6q-nitrogen6-max {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
-				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
-				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
-				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
-			>;
-		};
-
-		pinctrl_can1: can1grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
-				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
-			>;
-		};
-
-		pinctrl_can_xcvr: can-xcvrgrp {
-			fsl,pins = <
-				/* Flexcan XCVR enable */
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
-				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
-				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
-				MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x000b1
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				/* Phy reset */
-				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x0f0b0
-				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
-				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
-			>;
-		};
-
-		pinctrl_gpio_keys: gpio-keysgrp {
-			fsl,pins = <
-				/* Power Button */
-				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
-				/* Menu Button */
-				MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
-				/* Home Button */
-				MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
-				/* Back Button */
-				MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
-				/* Volume Up Button */
-				MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
-				/* Volume Down Button */
-				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1b0b0
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL	0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA	0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2mux: i2c2muxgrp {
-			fsl,pins = <
-				/* ov5642 camera i2c enable */
-				MX6QDL_PAD_EIM_D20__GPIO3_IO20	0x000b0
-				/* ov5640_mipi camera i2c enable */
-				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15	0x000b0
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_5__I2C3_SCL	0x4001b8b1
-				MX6QDL_PAD_GPIO_16__I2C3_SDA	0x4001b8b1
-				MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x1b0b0
-			>;
-		};
-
-		pinctrl_i2c3mux: i2c3muxgrp {
-			fsl,pins = <
-				/* PCIe I2C enable */
-				MX6QDL_PAD_EIM_OE__GPIO2_IO25	0x000b0
-			>;
-		};
-
-		pinctrl_j15: j15grp {
-			fsl,pins = <
-				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
-				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
-				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
-				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
-				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
-				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
-				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
-				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
-				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
-				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
-				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
-				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
-				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
-				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
-				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
-				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
-				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
-				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
-				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
-				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
-				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
-				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
-				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
-				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
-				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
-				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
-				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
-				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
-			>;
-		};
-
-		pinctrl_pcie: pciegrp {
-			fsl,pins = <
-				/* PCIe reset */
-				MX6QDL_PAD_EIM_BCLK__GPIO6_IO31	0x000b0
-			>;
-		};
-
-		pinctrl_pwm1: pwm1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT3__PWM1_OUT	0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm2: pwm2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT2__PWM2_OUT	0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm3: pwm3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT1__PWM3_OUT	0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm4: pwm4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__PWM4_OUT	0x1b0b1
-			>;
-		};
-
-		pinctrl_rv4162: rv4162grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL0__GPIO4_IO06	0x1b0b0
-			>;
-		};
-
-		pinctrl_sgtl5000: sgtl5000grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x000b0
-				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b0
-				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart5: uart5grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x130b1
-				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x030b1
-				/* RS485 RX Enable: pull up */
-				MX6QDL_PAD_NANDF_RB0__GPIO6_IO10	0x1b0b1
-				/* RS485 DEN: pull down */
-				MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x030b1
-				/* RS485/!RS232 Select: pull down (rs232) */
-				MX6QDL_PAD_EIM_CS1__GPIO2_IO24		0x030b1
-				/* ON: pull down */
-				MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x030b1
-			>;
-		};
-
-		pinctrl_usbh1: usbh1grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x0b0b0
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-				MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x1b0b0
-				/* power enable, high active */
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x000b0
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x100b0
-				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
-				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
-				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
-				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
-			>;
-		};
-
-		pinctrl_wlan_vmmc: wlan-vmmcgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x100b0
-				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x000b0
-				MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x000b0
-				MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT	0x000b0
-			>;
-		};
-	};
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&lcd_display_in>;
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in_lvds0>;
-			};
-		};
-	};
-
-	lvds-channel@1 {
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds1_out: endpoint {
-				remote-endpoint = <&panel_in_lvds1>;
-			};
-		};
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio6 31 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&pwm2 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>;
-	status = "okay";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&pwm4 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	bus-width = <4>;
-	non-removable;
-	vmmc-supply = <&reg_wlan_vmmc>;
-	cap-power-off-card;
-	keep-power-in-suspend;
-	status = "okay";
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1271";
-		reg = <2>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
-		ref-clock-frequency = <38400000>;
-	};
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-	bus-width = <4>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <8>;
-	non-removable;
-	vmmc-supply = <&reg_1p8v>;
-	keep-power-in-suspend;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
deleted file mode 100644
index 49da30d7510c..000000000000
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ /dev/null
@@ -1,692 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Copyright 2013 Boundary Devices, Inc.
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- */
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_2p5v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "2P5V";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-			regulator-always-on;
-		};
-
-		reg_3p3v: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usb_otg_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 0>;
-			enable-active-high;
-		};
-
-		reg_can_xcvr: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "CAN XCVR";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_can_xcvr>;
-			gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
-		};
-
-		reg_wlan_vmmc: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_wlan_vmmc>;
-			regulator-name = "reg_wlan_vmmc";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
-			startup-delay-us = <70000>;
-			enable-active-high;
-		};
-
-		reg_usb_h1_vbus: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usbh1>;
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		power {
-			label = "Power Button";
-			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-
-		menu {
-			label = "Menu";
-			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_MENU>;
-		};
-
-		home {
-			label = "Home";
-			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_HOME>;
-		};
-
-		back {
-			label = "Back";
-			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_BACK>;
-		};
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx6q-nitrogen6x-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx6q-nitrogen6x-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <3>;
-	};
-
-	backlight_lcd: backlight-lcd {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		power-supply = <&reg_3p3v>;
-		status = "okay";
-	};
-
-	backlight_lvds: backlight-lvds {
-		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		power-supply = <&reg_3p3v>;
-		status = "okay";
-	};
-
-	lcd_display: disp0 {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interface-pix-fmt = "bgr666";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_j15>;
-		status = "okay";
-
-		port@0 {
-			reg = <0>;
-
-			lcd_display_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_display_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-	};
-
-	panel-lcd {
-		compatible = "okaya,rs800480t-7x0gp";
-		backlight = <&backlight_lcd>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-
-	panel-lvds0 {
-		compatible = "hannstar,hsd100pxn1";
-		backlight = <&backlight_lvds>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	xceiver-supply = <&reg_can_xcvr>;
-	status = "okay";
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	flash: m25p80@0 {
-		compatible = "sst,sst25vf016b", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "bootloader";
-			reg = <0x0 0xc0000>;
-		};
-
-		partition@c0000 {
-			label = "env";
-			reg = <0xc0000 0x2000>;
-		};
-
-		partition@c2000 {
-			label = "splash";
-			reg = <0xc2000 0x13e000>;
-		};
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy>;
-	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
-	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
-			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
-	fsl,err006687-workaround-present;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy: ethernet-phy {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			txen-skew-ps = <0>;
-			txc-skew-ps = <3000>;
-			rxdv-skew-ps = <0>;
-			rxc-skew-ps = <3000>;
-			rxd0-skew-ps = <0>;
-			rxd1-skew-ps = <0>;
-			rxd2-skew-ps = <0>;
-			rxd3-skew-ps = <0>;
-			txd0-skew-ps = <0>;
-			txd1-skew-ps = <0>;
-			txd2-skew-ps = <0>;
-			txd3-skew-ps = <0>;
-		};
-	};
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	codec: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-
-	rtc: rtc@6f {
-		compatible = "isil,isl1208";
-		reg = <0x6f>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	touchscreen@4 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
-		wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-	};
-
-	touchscreen@38 {
-		compatible = "edt,edt-ft5x06";
-		reg = <0x38>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
-		wakeup-source;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6q-nitrogen6x {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				/* SGTL5000 sys_mclk */
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x030b0
-				MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x1b0b0
-			>;
-		};
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
-				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
-				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
-				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
-			>;
-		};
-
-		pinctrl_can1: can1grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
-				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
-			>;
-		};
-
-		pinctrl_can_xcvr: can-xcvrgrp {
-			fsl,pins = <
-				/* Flexcan XCVR enable */
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
-				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
-				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
-				MX6QDL_PAD_EIM_D19__GPIO3_IO19  0x000b1	/* CS */
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				/* Phy reset */
-				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x000b0
-				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
-			>;
-		};
-
-		pinctrl_gpio_keys: gpio-keysgrp {
-			fsl,pins = <
-				/* Power Button */
-				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
-				/* Menu Button */
-				MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
-				/* Home Button */
-				MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
-				/* Back Button */
-				MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
-				/* Volume Up Button */
-				MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
-				/* Volume Down Button */
-				MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_GPIO_16__I2C3_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_j15: j15grp {
-			fsl,pins = <
-				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
-				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
-				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
-				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
-				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
-				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
-				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
-				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
-				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
-				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
-				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
-				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
-				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
-				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
-				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
-				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
-				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
-				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
-				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
-				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
-				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
-				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
-				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
-				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
-				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
-				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
-				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
-				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
-			>;
-		};
-
-		pinctrl_pwm1: pwm1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm3: pwm3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm4: pwm4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbh1: usbh1grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x030b0
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID	0x17059
-				MX6QDL_PAD_KEY_COL4__USB_OTG_OC	0x1b0b0
-				/* power enable, high active */
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x000b0
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17071
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10071
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17071
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17071
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17071
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17071
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0	/* CD */
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-				MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0	/* CD */
-			>;
-		};
-
-		pinctrl_wlan_vmmc: wlan-vmmcgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x100b0
-				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x000b0
-				MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x000b0
-				MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT	0x000b0
-			>;
-		};
-	};
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&lcd_display_in>;
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
-
-&pcie {
-	status = "okay";
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&pwm4 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	bus-width = <4>;
-	non-removable;
-	vmmc-supply = <&reg_wlan_vmmc>;
-	cap-power-off-card;
-	keep-power-in-suspend;
-	status = "okay";
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1271";
-		reg = <2>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
-		ref-clock-frequency = <38400000>;
-	};
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
deleted file mode 100644
index f3236204cb5a..000000000000
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ /dev/null
@@ -1,453 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Phytec phyFLEX-i.MX6 Quad";
-	compatible = "phytec,imx6q-pfla02", "fsl,imx6q";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x80000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb_otg_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio4 15 0>;
-			enable-active-high;
-		};
-
-		reg_usb_h1_vbus: regulator@1 {
-			compatible = "regulator-fixed";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usbh1_vbus>;
-			reg = <1>;
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 0 0>;
-			enable-active-high;
-		};
-	};
-
-	gpio_leds: leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_leds>;
-		compatible = "gpio-leds";
-
-		green {
-			label = "phyflex:green";
-			gpios = <&gpio1 30 0>;
-		};
-
-		red {
-			label = "phyflex:red";
-			gpios = <&gpio2 31 0>;
-		};
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "disabled";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	status = "disabled";
-};
-
-&ecspi3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi3>;
-	status = "okay";
-	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
-
-	som_flash: flash@0 {
-		compatible = "m25p80", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-handle = <&ethphy>;
-	phy-mode = "rgmii";
-	phy-reset-duration = <10>; /* in msecs */
-	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
-	phy-supply = <&vdd_eth_io_reg>;
-	status = "disabled";
-
-	fec_mdio: mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy: ethernet-phy@0 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <0>;
-			txc-skew-ps = <1680>;
-			rxc-skew-ps = <1860>;
-		};
-	};
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	som_eeprom: eeprom@50 {
-		compatible = "catalyst,24c32", "atmel,24c32";
-		pagesize = <32>;
-		reg = <0x50>;
-	};
-
-	pmic@58 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pmic>;
-		compatible = "dlg,da9063";
-		reg = <0x58>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <9 IRQ_TYPE_LEVEL_LOW>; /* active-low GPIO2_9 */
-		interrupt-controller;
-
-		regulators {
-			vddcore_reg: bcore1 {
-				regulator-min-microvolt = <730000>;
-				regulator-max-microvolt = <1380000>;
-				regulator-always-on;
-			};
-
-			vddsoc_reg: bcore2 {
-				regulator-min-microvolt = <730000>;
-				regulator-max-microvolt = <1380000>;
-				regulator-always-on;
-			};
-
-			vdd_ddr3_reg: bpro {
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-			};
-
-			vdd_3v3_reg: bperi {
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_buckmem_reg: bmem {
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_eth_reg: bio {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			vdd_eth_io_reg: ldo4 {
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <2500000>;
-				regulator-always-on;
-			};
-
-			vdd_mx6_snvs_reg: ldo5 {
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-			};
-
-			vdd_3v3_pmic_io_reg: ldo6 {
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_sd0_reg: ldo9 {
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vdd_sd1_reg: ldo10 {
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vdd_mx6_high_reg: ldo11 {
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	clock-frequency = <100000>;
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	clock-frequency = <100000>;
-};
-
-&iomuxc {
-	imx6q-phytec-pfla02 {
-		pinctrl_ecspi3: ecspi3grp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
-				MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
-				MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
-				MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x80000000 /* CS0 */
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
-				MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x80000000 /* Reset GPIO */
-			>;
-		};
-
-		pinctrl_flexcan1: flexcan1grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
-				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
-			>;
-		};
-
-		pinctrl_gpmi_nand: gpminandgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
-				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
-				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
-				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
-				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
-				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
-				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
-				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
-				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
-				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
-				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
-				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
-				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
-				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
-				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
-				MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D16__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D18__I2C3_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_leds: ledsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x80000000 /* Green LED */
-				MX6QDL_PAD_EIM_EB3__GPIO2_IO31		0x80000000 /* Red LED */
-			>;
-		};
-
-		pinctrl_pcie: pciegrp {
-			fsl,pins = <MX6QDL_PAD_DI0_PIN15__GPIO4_IO17  0x80000000>;
-		};
-
-		pinctrl_pmic: pmicgrp {
-			fsl,pins = <MX6QDL_PAD_SD4_DAT1__GPIO2_IO09	0x80000000>; /* PMIC interrupt */
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
-				MX6QDL_PAD_EIM_D30__UART3_CTS_B		0x1b0b1
-			>;
-		};
-
-		pinctrl_uart4: uart4grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
-				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbh1_vbus: usbh1vbusgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-				MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x1b0b0
-				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x80000000
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3_cdwp: usdhc3cdwp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000
-				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
-			>;
-		};
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT16__AUD5_TXC	0x130b0
-				MX6QDL_PAD_DISP0_DAT17__AUD5_TXD	0x110b0
-				MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS	0x130b0
-				MX6QDL_PAD_DISP0_DAT19__AUD5_RXD	0x130b0
-			>;
-		};
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio4 17 GPIO_ACTIVE_LOW>;
-	status = "disabled";
-};
-
-&reg_arm {
-	vin-supply = <&vddcore_reg>;
-};
-
-&reg_pu {
-	vin-supply = <&vddsoc_reg>;
-};
-
-&reg_soc {
-	vin-supply = <&vddsoc_reg>;
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	status = "disabled";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "disabled";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	status = "disabled";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "disabled";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-	vmmc-supply = <&vdd_sd1_reg>;
-	status = "disabled";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3
-		     &pinctrl_usdhc3_cdwp>;
-	cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
-	vmmc-supply = <&vdd_sd0_reg>;
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi
deleted file mode 100644
index de514eb5aa99..000000000000
--- a/arch/arm/boot/dts/imx6qdl-rex.dtsi
+++ /dev/null
@@ -1,367 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 2014 FEDEVEL, Inc.
- *
- * Author: Robert Nelson <robertcnelson@gmail.com>
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usbh1_vbus: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			pinctrl-names = "default";
-			regulator-name = "usbh1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		reg_usb_otg_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			pinctrl-names = "default";
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_led>;
-
-		led0: usr {
-			label = "usr";
-			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx6-rex-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx6-rex-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <3>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&ecspi2 {
-	cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	status = "okay";
-};
-
-&ecspi3 {
-	cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi3>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	codec: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_3p3v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	pca9535: gpio-expander@27 {
-		compatible = "nxp,pca9535";
-		reg = <0x27>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pca9535>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	eeprom@57 {
-		compatible = "atmel,24c02";
-		reg = <0x57>;
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6qdl-rex {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				/* SGTL5000 sys_mclk */
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x030b0
-			>;
-		};
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
-				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
-				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
-				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
-			>;
-		};
-
-		pinctrl_ecspi2: ecspi2grp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
-				MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
-				MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
-				/* CS */
-				MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26	0x000b1
-			>;
-		};
-
-		pinctrl_ecspi3: ecspi3grp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO	0x100b1
-				MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI	0x100b1
-				MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK	0x100b1
-				/* CS */
-				MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x000b1
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-				/* Phy reset */
-				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x000b0
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
-				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D18__I2C3_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_led: ledgrp {
-			fsl,pins = <
-				/* user led */
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000
-			>;
-		};
-
-		pinctrl_pca9535: pca9535grp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x17059
-		   >;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbh1: usbh1grp {
-			fsl,pins = <
-				/* power enable, high active */
-				MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x10b0
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-				MX6QDL_PAD_EIM_D21__USB_OTG_OC		0x1b0b0
-				/* power enable, high active */
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x10b0
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-				/* CD */
-				MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
-				/* WP */
-				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1f0b0
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				/* CD */
-				MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x1b0b0
-				/* WP */
-				MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1f0b0
-			>;
-		};
-	};
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usbh1_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh1>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	bus-width = <4>;
-	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	bus-width = <4>;
-	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
deleted file mode 100644
index 5e58740d40c5..000000000000
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ /dev/null
@@ -1,863 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2012 Freescale Semiconductor, Inc.
-// Copyright 2011 Linaro Ltd.
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	chosen {
-		stdout-path = &uart4;
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x80000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		user {
-			label = "debug";
-			gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		home {
-			label = "Home";
-			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_HOME>;
-			wakeup-source;
-		};
-
-		back {
-			label = "Back";
-			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_BACK>;
-			wakeup-source;
-		};
-
-		program {
-			label = "Program";
-			gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_PROGRAM>;
-			wakeup-source;
-		};
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-			wakeup-source;
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio5 14 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-			wakeup-source;
-		};
-	};
-
-	clocks {
-		codec_osc: anaclk2 {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <24576000>;
-		};
-	};
-
-	reg_audio: regulator-audio {
-		compatible = "regulator-fixed";
-		regulator-name = "cs42888_supply";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_usb_h1_vbus: regulator-usb-h1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_h1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&max7310_b 7 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&max7310_c 1 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_can_en: regulator-can-en {
-		compatible = "regulator-fixed";
-		regulator-name = "can-en";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&max7310_b 6 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_can_stby: regulator-can-stby {
-		compatible = "regulator-fixed";
-		regulator-name = "can-stby";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&max7310_b 5 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		vin-supply = <&reg_can_en>;
-	};
-
-	sound-cs42888 {
-		compatible = "fsl,imx6-sabreauto-cs42888",
-			"fsl,imx-audio-cs42888";
-		model = "imx-cs42888";
-		audio-cpu = <&esai>;
-		audio-asrc = <&asrc>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"Line Out Jack", "AOUT1L",
-			"Line Out Jack", "AOUT1R",
-			"Line Out Jack", "AOUT2L",
-			"Line Out Jack", "AOUT2R",
-			"Line Out Jack", "AOUT3L",
-			"Line Out Jack", "AOUT3R",
-			"Line Out Jack", "AOUT4L",
-			"Line Out Jack", "AOUT4R",
-			"AIN1L", "Line In Jack",
-			"AIN1R", "Line In Jack",
-			"AIN2L", "Line In Jack",
-			"AIN2R", "Line In Jack";
-	};
-
-	sound-spdif {
-		compatible = "fsl,imx-audio-spdif",
-			   "fsl,imx-sabreauto-spdif";
-		model = "imx-spdif";
-		spdif-controller = <&spdif>;
-		spdif-in;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		status = "okay";
-	};
-
-	i2cmux {
-		compatible = "i2c-mux-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c3mux>;
-		mux-gpios = <&gpio5 4 0>;
-		i2c-parent = <&i2c3>;
-		idle-state = <0>;
-
-		i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			adv7180: camera@21 {
-				compatible = "adi,adv7180";
-				reg = <0x21>;
-				powerdown-gpios = <&max7310_b 2 GPIO_ACTIVE_LOW>;
-				interrupt-parent = <&gpio1>;
-				interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
-
-				port {
-					adv7180_to_ipu1_csi0_mux: endpoint {
-						remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
-						bus-width = <8>;
-					};
-				};
-			};
-
-			max7310_a: gpio@30 {
-				compatible = "maxim,max7310";
-				reg = <0x30>;
-				gpio-controller;
-				#gpio-cells = <2>;
-			};
-
-			max7310_b: gpio@32 {
-				compatible = "maxim,max7310";
-				reg = <0x32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_max7310>;
-				reset-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-			};
-
-			max7310_c: gpio@34 {
-				compatible = "maxim,max7310";
-				reg = <0x34>;
-				gpio-controller;
-				#gpio-cells = <2>;
-			};
-
-			light-sensor@44 {
-				compatible = "isil,isl29023";
-				reg = <0x44>;
-				interrupt-parent = <&gpio5>;
-				interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
-			};
-
-			magnetometer@e {
-				compatible = "fsl,mag3110";
-				reg = <0x0e>;
-				interrupt-parent = <&gpio2>;
-				interrupts = <29 IRQ_TYPE_EDGE_RISING>;
-			};
-
-			accelerometer@1c {
-				compatible = "fsl,mma8451";
-				reg = <0x1c>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_mma8451_int>;
-				interrupt-parent = <&gpio6>;
-				interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
-			};
-		};
-	};
-};
-
-&ipu1_csi0_from_ipu1_csi0_mux {
-	bus-width = <8>;
-};
-
-&ipu1_csi0_mux_from_parallel_sensor {
-	remote-endpoint = <&adv7180_to_ipu1_csi0_mux>;
-	bus-width = <8>;
-};
-
-&ipu1_csi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ipu1_csi0>;
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_PLL4_BYPASS_SRC>,
-			  <&clks IMX6QDL_PLL4_BYPASS>,
-			  <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
-			  <&clks IMX6QDL_CLK_PLL4_POST_DIV>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_LVDS2_IN>,
-				 <&clks IMX6QDL_PLL4_BYPASS_SRC>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-	assigned-clock-rates = <0>, <0>, <0>, <0>, <24576000>;
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
-	status = "disabled"; /* pin conflict with WEIM NOR */
-
-	flash: m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "st,m25p32", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&esai {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esai>;
-	assigned-clocks = <&clks IMX6QDL_CLK_ESAI_SEL>,
-			  <&clks IMX6QDL_CLK_ESAI_EXTAL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>;
-	assigned-clock-rates = <0>, <24576000>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
-			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
-	fsl,err006687-workaround-present;
-	fsl,magic-packet;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	xceiver-supply = <&reg_can_stby>;
-	status = "disabled"; /* pin conflict with fec */
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	xceiver-supply = <&reg_can_stby>;
-	status = "okay";
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	status = "okay";
-};
-
-&hdmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hdmi_cec>;
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	pmic: pfuze100@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-
-	codec: cs42888@48 {
-		compatible = "cirrus,cs42888";
-		reg = <0x48>;
-		clocks = <&codec_osc>;
-		clock-names = "mclk";
-		VA-supply = <&reg_audio>;
-		VD-supply = <&reg_audio>;
-		VLS-supply = <&reg_audio>;
-		VLC-supply = <&reg_audio>;
-	};
-
-	touchscreen@4 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_egalax_int>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
-		wakeup-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6qdl-sabreauto {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x80000000
-				MX6QDL_PAD_SD2_DAT2__GPIO1_IO13  0x80000000
-				MX6QDL_PAD_GPIO_18__SD3_VSELECT 0x17059
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
-				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
-				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
-			>;
-		};
-
-		pinctrl_ecspi1_cs: ecspi1cs {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000
-			>;
-		};
-
-		pinctrl_egalax_int: egalax-intgrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0xb0b1
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL1__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_KEY_COL2__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
-			>;
-		};
-
-		pinctrl_esai: esaigrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1b030
-				MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS    0x1b030
-				MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2 0x1b030
-				MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3     0x1b030
-				MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1  0x1b030
-				MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0   0x1b030
-				MX6QDL_PAD_GPIO_17__ESAI_TX0        0x1b030
-				MX6QDL_PAD_NANDF_CS3__ESAI_TX1      0x1b030
-				MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK   0x1b030
-				MX6QDL_PAD_GPIO_9__ESAI_RX_FS       0x1b030
-			>;
-		};
-
-		pinctrl_flexcan1: flexcan1grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX        0x17059
-				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x17059
-			>;
-		};
-
-		pinctrl_flexcan2: flexcan2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x17059
-				MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x17059
-			>;
-		};
-
-		pinctrl_gpio_keys: gpiokeysgrp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__GPIO1_IO11		0x1b0b0
-				MX6QDL_PAD_SD2_DAT3__GPIO1_IO12		0x1b0b0
-				MX6QDL_PAD_SD4_DAT4__GPIO2_IO12		0x1b0b0
-				MX6QDL_PAD_SD4_DAT7__GPIO2_IO15		0x1b0b0
-				MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b0b0
-			>;
-		};
-
-		pinctrl_gpio_leds: gpioledsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x80000000
-			>;
-		};
-
-		pinctrl_gpmi_nand: gpminandgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
-				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
-				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
-				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
-				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
-				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
-				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
-				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
-				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
-				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
-				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
-				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
-				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
-				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
-				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
-				MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
-			>;
-		};
-
-		pinctrl_hdmi_cec: hdmicecgrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE	0x1f8b0
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_EB2__I2C2_SCL	0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_3__I2C3_SCL  0x4001b8b1
-				MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3mux: i2c3muxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x0b0b1
-			>;
-		};
-
-		pinctrl_ipu1_csi0: ipu1csi0grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12  0x1b0b0
-				MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13  0x1b0b0
-				MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14  0x1b0b0
-				MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15  0x1b0b0
-				MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16  0x1b0b0
-				MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17  0x1b0b0
-				MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18  0x1b0b0
-				MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19  0x1b0b0
-				MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0
-				MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC    0x1b0b0
-				MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC   0x1b0b0
-			>;
-		};
-
-		pinctrl_max7310: max7310grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x1b0b0
-			>;
-		};
-
-		pinctrl_mma8451_int: mma8451intgrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0xb0b1
-			>;
-		};
-
-		pinctrl_pwm3: pwm1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_gpt_input_capture0: gptinputcapture0grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT0__GPT_CAPTURE1	0x1b0b0
-			>;
-		};
-
-		pinctrl_gpt_input_capture1: gptinputcapture1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT1__GPT_CAPTURE2	0x1b0b0
-			>;
-		};
-
-		pinctrl_spdif: spdifgrp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__SPDIF_IN 0x1b0b0
-			>;
-		};
-
-		pinctrl_uart4: uart4grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
-				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
-				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
-				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
-				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
-				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170b9
-				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170b9
-				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170b9
-				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170b9
-			>;
-		};
-
-		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
-				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170f9
-				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170f9
-				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170f9
-				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170f9
-			>;
-		};
-
-		pinctrl_weim_cs0: weimcs0grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_CS0__EIM_CS0_B		0xb0b1
-			>;
-		};
-
-		pinctrl_weim_nor: weimnorgrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_OE__EIM_OE_B		0xb0b1
-				MX6QDL_PAD_EIM_RW__EIM_RW		0xb0b1
-				MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B		0xb060
-				MX6QDL_PAD_EIM_D16__EIM_DATA16		0x1b0b0
-				MX6QDL_PAD_EIM_D17__EIM_DATA17		0x1b0b0
-				MX6QDL_PAD_EIM_D18__EIM_DATA18		0x1b0b0
-				MX6QDL_PAD_EIM_D19__EIM_DATA19		0x1b0b0
-				MX6QDL_PAD_EIM_D20__EIM_DATA20		0x1b0b0
-				MX6QDL_PAD_EIM_D21__EIM_DATA21		0x1b0b0
-				MX6QDL_PAD_EIM_D22__EIM_DATA22		0x1b0b0
-				MX6QDL_PAD_EIM_D23__EIM_DATA23		0x1b0b0
-				MX6QDL_PAD_EIM_D24__EIM_DATA24		0x1b0b0
-				MX6QDL_PAD_EIM_D25__EIM_DATA25		0x1b0b0
-				MX6QDL_PAD_EIM_D26__EIM_DATA26		0x1b0b0
-				MX6QDL_PAD_EIM_D27__EIM_DATA27		0x1b0b0
-				MX6QDL_PAD_EIM_D28__EIM_DATA28		0x1b0b0
-				MX6QDL_PAD_EIM_D29__EIM_DATA29		0x1b0b0
-				MX6QDL_PAD_EIM_D30__EIM_DATA30		0x1b0b0
-				MX6QDL_PAD_EIM_D31__EIM_DATA31		0x1b0b0
-				MX6QDL_PAD_EIM_A23__EIM_ADDR23		0xb0b1
-				MX6QDL_PAD_EIM_A22__EIM_ADDR22		0xb0b1
-				MX6QDL_PAD_EIM_A21__EIM_ADDR21		0xb0b1
-				MX6QDL_PAD_EIM_A20__EIM_ADDR20		0xb0b1
-				MX6QDL_PAD_EIM_A19__EIM_ADDR19		0xb0b1
-				MX6QDL_PAD_EIM_A18__EIM_ADDR18		0xb0b1
-				MX6QDL_PAD_EIM_A17__EIM_ADDR17		0xb0b1
-				MX6QDL_PAD_EIM_A16__EIM_ADDR16		0xb0b1
-				MX6QDL_PAD_EIM_DA15__EIM_AD15		0xb0b1
-				MX6QDL_PAD_EIM_DA14__EIM_AD14		0xb0b1
-				MX6QDL_PAD_EIM_DA13__EIM_AD13		0xb0b1
-				MX6QDL_PAD_EIM_DA12__EIM_AD12		0xb0b1
-				MX6QDL_PAD_EIM_DA11__EIM_AD11		0xb0b1
-				MX6QDL_PAD_EIM_DA10__EIM_AD10		0xb0b1
-				MX6QDL_PAD_EIM_DA9__EIM_AD09		0xb0b1
-				MX6QDL_PAD_EIM_DA8__EIM_AD08		0xb0b1
-				MX6QDL_PAD_EIM_DA7__EIM_AD07		0xb0b1
-				MX6QDL_PAD_EIM_DA6__EIM_AD06		0xb0b1
-				MX6QDL_PAD_EIM_DA5__EIM_AD05		0xb0b1
-				MX6QDL_PAD_EIM_DA4__EIM_AD04		0xb0b1
-				MX6QDL_PAD_EIM_DA3__EIM_AD03		0xb0b1
-				MX6QDL_PAD_EIM_DA2__EIM_AD02		0xb0b1
-				MX6QDL_PAD_EIM_DA1__EIM_AD01		0xb0b1
-				MX6QDL_PAD_EIM_DA0__EIM_AD00		0xb0b1
-			>;
-		};
-	};
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
-			};
-		};
-	};
-};
-
-&pwm3 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&pcie {
-	status = "okay";
-};
-
-&spdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spdif>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	cd-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&weim {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_weim_nor &pinctrl_weim_cs0>;
-	ranges = <0 0 0x08000000 0x08000000>;
-	status = "disabled"; /* pin conflict with SPI NOR */
-
-	nor@0,0 {
-		compatible = "cfi-flash";
-		reg = <0 0 0x02000000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		bank-width = <2>;
-		fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000
-				0x0000c000 0x1404a38e 0x00000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
deleted file mode 100644
index eb9a0b104f1c..000000000000
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ /dev/null
@@ -1,778 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/clock/imx6qdl-clock.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_2p5v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "2P5V";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-			regulator-always-on;
-		};
-
-		reg_3p3v: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usb_otg_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 0>;
-			enable-active-high;
-		};
-
-		reg_can_xcvr: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "CAN XCVR";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_can_xcvr>;
-			gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
-		};
-
-		reg_1p5v: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "1P5V";
-			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <1500000>;
-			regulator-always-on;
-		};
-
-		reg_1p8v: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "1P8V";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		reg_2p8v: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			regulator-name = "2P8V";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			regulator-always-on;
-		};
-
-		reg_usb_h1_vbus: regulator@7 {
-			compatible = "regulator-fixed";
-			reg = <7>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usbh1>;
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-	};
-
-	mipi_xclk: mipi_xclk {
-		compatible = "pwm-clock";
-		#clock-cells = <0>;
-		clock-frequency = <22000000>;
-		clock-output-names = "mipi_pwm3";
-		pwms = <&pwm3 0 45>; /* 1 / 45 ns = 22 MHz */
-		status = "okay";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		power {
-			label = "Power Button";
-			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-
-		menu {
-			label = "Menu";
-			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_MENU>;
-		};
-
-		home {
-			label = "Home";
-			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_HOME>;
-		};
-
-		back {
-			label = "Back";
-			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_BACK>;
-		};
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx6q-sabrelite-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx6q-sabrelite-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <4>;
-	};
-
-	backlight_lcd: backlight-lcd {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		power-supply = <&reg_3p3v>;
-		status = "okay";
-	};
-
-	backlight_lvds: backlight-lvds {
-		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		power-supply = <&reg_3p3v>;
-		status = "okay";
-	};
-
-	lcd_display: disp0 {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interface-pix-fmt = "bgr666";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_j15>;
-		status = "okay";
-
-		port@0 {
-			reg = <0>;
-
-			lcd_display_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_display_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-	};
-
-	panel-lcd {
-		compatible = "okaya,rs800480t-7x0gp";
-		backlight = <&backlight_lcd>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-
-	panel-lvds0 {
-		compatible = "hannstar,hsd100pxn1";
-		backlight = <&backlight_lvds>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-};
-
-&ipu1_csi0_from_ipu1_csi0_mux {
-	bus-width = <8>;
-	data-shift = <12>; /* Lines 19:12 used */
-	hsync-active = <1>;
-	vync-active = <1>;
-};
-
-&ipu1_csi0_mux_from_parallel_sensor {
-	remote-endpoint = <&ov5642_to_ipu1_csi0_mux>;
-};
-
-&ipu1_csi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ipu1_csi0>;
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	xceiver-supply = <&reg_can_xcvr>;
-	status = "okay";
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	flash: m25p80@0 {
-		compatible = "sst,sst25vf016b", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy>;
-	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy: ethernet-phy {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			txen-skew-ps = <0>;
-			txc-skew-ps = <3000>;
-			rxdv-skew-ps = <0>;
-			rxc-skew-ps = <3000>;
-			rxd0-skew-ps = <0>;
-			rxd1-skew-ps = <0>;
-			rxd2-skew-ps = <0>;
-			rxd3-skew-ps = <0>;
-			txd0-skew-ps = <0>;
-			txd1-skew-ps = <0>;
-			txd2-skew-ps = <0>;
-			txd3-skew-ps = <0>;
-		};
-	};
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	codec: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	ov5640: camera@40 {
-		compatible = "ovti,ov5640";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ov5640>;
-		reg = <0x40>;
-		clocks = <&mipi_xclk>;
-		clock-names = "xclk";
-		DOVDD-supply = <&reg_1p8v>;
-		AVDD-supply = <&reg_2p8v>;
-		DVDD-supply = <&reg_1p5v>;
-		reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* NANDF_D5 */
-		powerdown-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* NANDF_WP_B */
-
-		port {
-			ov5640_to_mipi_csi2: endpoint {
-				remote-endpoint = <&mipi_csi2_in>;
-				clock-lanes = <0>;
-				data-lanes = <1 2>;
-			};
-		};
-	};
-
-	ov5642: camera@42 {
-		compatible = "ovti,ov5642";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ov5642>;
-		clocks = <&clks IMX6QDL_CLK_CKO2>;
-		clock-names = "xclk";
-		reg = <0x42>;
-		reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
-		powerdown-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-		gp-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
-		status = "disabled";
-
-		port {
-			ov5642_to_ipu1_csi0_mux: endpoint {
-				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
-				bus-width = <8>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6q-sabrelite {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				/* SGTL5000 sys_mclk */
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x030b0
-			>;
-		};
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
-				MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
-				MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
-				MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
-			>;
-		};
-
-		pinctrl_can1: can1grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
-				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
-			>;
-		};
-
-		pinctrl_can_xcvr: can-xcvrgrp {
-			fsl,pins = <
-				/* Flexcan XCVR enable */
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
-				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
-				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
-				MX6QDL_PAD_EIM_D19__GPIO3_IO19  0x000b1	/* CS */
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				/* Phy reset */
-				MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x000b0
-			>;
-		};
-
-		pinctrl_gpio_keys: gpio-keysgrp {
-			fsl,pins = <
-				/* Power Button */
-				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
-				/* Menu Button */
-				MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
-				/* Home Button */
-				MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
-				/* Back Button */
-				MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
-				/* Volume Up Button */
-				MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
-				/* Volume Down Button */
-				MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_GPIO_16__I2C3_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_ipu1_csi0: ipu1csi0grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19    0x1b0b0
-				MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK   0x1b0b0
-				MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC      0x1b0b0
-				MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC     0x1b0b0
-				MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN 0x1b0b0
-			>;
-		};
-
-		pinctrl_j15: j15grp {
-			fsl,pins = <
-				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
-				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
-				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
-				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
-				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
-				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
-				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
-				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
-				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
-				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
-				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
-				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
-				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
-				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
-				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
-				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
-				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
-				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
-				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
-				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
-				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
-				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
-				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
-				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
-				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
-				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
-				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
-				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
-			>;
-		};
-
-		pinctrl_ov5640: ov5640grp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_D5__GPIO2_IO05   0x000b0
-				MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x0b0b0
-			>;
-		};
-
-		pinctrl_ov5642: ov5642grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0
-				MX6QDL_PAD_GPIO_6__GPIO1_IO06   0x1b0b0
-				MX6QDL_PAD_GPIO_8__GPIO1_IO08   0x130b0
-				MX6QDL_PAD_GPIO_3__CCM_CLKO2    0x000b0
-			>;
-		};
-
-		pinctrl_pwm1: pwm1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm3: pwm3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm4: pwm4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbh1: usbh1grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x030b0
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-				MX6QDL_PAD_KEY_COL4__USB_OTG_OC	0x1b0b0
-				/* power enable, high active */
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x000b0
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0	/* CD */
-				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0	/* WP */
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-				MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0	/* CD */
-			>;
-		};
-	};
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&lcd_display_in>;
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
-
-&pcie {
-	status = "okay";
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&pwm3 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&pwm4 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&mipi_csi {
-	status = "okay";
-
-	port@0 {
-		reg = <0>;
-
-		mipi_csi2_in: endpoint {
-			remote-endpoint = <&ov5640_to_mipi_csi2>;
-			clock-lanes = <0>;
-			data-lanes = <1 2>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
deleted file mode 100644
index 0c0105468a2f..000000000000
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ /dev/null
@@ -1,851 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2012 Freescale Semiconductor, Inc.
-// Copyright 2011 Linaro Ltd.
-
-#include <dt-bindings/clock/imx6qdl-clock.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		vin-supply = <&swbst_reg>;
-	};
-
-	reg_usb_h1_vbus: regulator-usb-h1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_h1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		vin-supply = <&swbst_reg>;
-	};
-
-	reg_audio: regulator-audio {
-		compatible = "regulator-fixed";
-		regulator-name = "wm8962-supply";
-		gpio = <&gpio4 10 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_pcie: regulator-pcie {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pcie_reg>;
-		regulator-name = "MPCIE_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_sensors: regulator-sensors {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_sensors_reg>;
-		regulator-name = "sensors-supply";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		power {
-			label = "Power Button";
-			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
-			wakeup-source;
-			linux,code = <KEY_POWER>;
-		};
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-			wakeup-source;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
-			wakeup-source;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx6q-sabresd-wm8962",
-			   "fsl,imx-audio-wm8962";
-		model = "wm8962-audio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hp>;
-		ssi-controller = <&ssi2>;
-		audio-codec = <&codec>;
-		audio-asrc = <&asrc>;
-		audio-routing =
-			"Headphone Jack", "HPOUTL",
-			"Headphone Jack", "HPOUTR",
-			"Ext Spk", "SPKOUTL",
-			"Ext Spk", "SPKOUTR",
-			"AMIC", "MICBIAS",
-			"IN3R", "AMIC",
-			"DMIC", "MICBIAS",
-			"DMICDAT", "DMIC";
-		mux-int-port = <2>;
-		mux-ext-port = <3>;
-		hp-det-gpio = <&gpio7 8 GPIO_ACTIVE_LOW>;
-		mic-det-gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
-	};
-
-	backlight_lvds: backlight-lvds {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-		status = "okay";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		red {
-			gpios = <&gpio1 2 0>;
-			default-state = "on";
-		};
-	};
-
-	panel {
-		compatible = "hannstar,hsd100pxn1";
-		backlight = <&backlight_lvds>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-};
-
-&ipu1_csi0_from_ipu1_csi0_mux {
-	bus-width = <8>;
-	data-shift = <12>; /* Lines 19:12 used */
-	hsync-active = <1>;
-	vsync-active = <1>;
-};
-
-&ipu1_csi0_mux_from_parallel_sensor {
-	remote-endpoint = <&ov5642_to_ipu1_csi0_mux>;
-};
-
-&ipu1_csi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ipu1_csi0>;
-};
-
-&mipi_csi {
-	status = "okay";
-
-	port@0 {
-		reg = <0>;
-
-		mipi_csi2_in: endpoint {
-			remote-endpoint = <&ov5640_to_mipi_csi2>;
-			clock-lanes = <0>;
-			data-lanes = <1 2>;
-		};
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	flash: m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "st,m25p32", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	phy-handle = <&phy>;
-	fsl,magic-packet;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		phy: ethernet-phy@1 {
-			reg = <1>;
-			qca,clk-out-frequency = <125000000>;
-			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <10000>;
-		};
-	};
-};
-
-&hdmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hdmi_cec>;
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	codec: wm8962@1a {
-		compatible = "wlf,wm8962";
-		reg = <0x1a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		DCVDD-supply = <&reg_audio>;
-		DBVDD-supply = <&reg_audio>;
-		AVDD-supply = <&reg_audio>;
-		CPVDD-supply = <&reg_audio>;
-		MICVDD-supply = <&reg_audio>;
-		PLLVDD-supply = <&reg_audio>;
-		SPKVDD1-supply = <&reg_audio>;
-		SPKVDD2-supply = <&reg_audio>;
-		gpio-cfg = <
-			0x0000 /* 0:Default */
-			0x0000 /* 1:Default */
-			0x0013 /* 2:FN_DMICCLK */
-			0x0000 /* 3:Default */
-			0x8014 /* 4:FN_DMICCDAT */
-			0x0000 /* 5:Default */
-		>;
-	};
-
-	accelerometer@1c {
-		compatible = "fsl,mma8451";
-		reg = <0x1c>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c1_mma8451_int>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
-		vdd-supply = <&reg_sensors>;
-		vddio-supply = <&reg_sensors>;
-	};
-
-	ov5642: camera@3c {
-		compatible = "ovti,ov5642";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ov5642>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		clock-names = "xclk";
-		reg = <0x3c>;
-		DOVDD-supply = <&vgen4_reg>; /* 1.8v */
-		AVDD-supply = <&vgen3_reg>;  /* 2.8v, rev C board is VGEN3
-						rev B board is VGEN5 */
-		DVDD-supply = <&vgen2_reg>;  /* 1.5v*/
-		powerdown-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-		status = "disabled";
-
-		port {
-			ov5642_to_ipu1_csi0_mux: endpoint {
-				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
-				bus-width = <8>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-			};
-		};
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	touchscreen@4 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c2_egalax_int>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
-		wakeup-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
-	};
-
-	ov5640: camera@3c {
-		compatible = "ovti,ov5640";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ov5640>;
-		reg = <0x3c>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		clock-names = "xclk";
-		DOVDD-supply = <&vgen4_reg>; /* 1.8v */
-		AVDD-supply = <&vgen3_reg>;  /* 2.8v, rev C board is VGEN3
-						rev B board is VGEN5 */
-		DVDD-supply = <&vgen2_reg>;  /* 1.5v*/
-		powerdown-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
-
-		port {
-			ov5640_to_mipi_csi2: endpoint {
-				remote-endpoint = <&mipi_csi2_in>;
-				clock-lanes = <0>;
-				data-lanes = <1 2>;
-			};
-		};
-	};
-
-	pmic: pfuze100@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	egalax_ts@4 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <7 2>;
-		wakeup-gpios = <&gpio6 7 0>;
-	};
-
-	magnetometer@e {
-		compatible = "fsl,mag3110";
-		reg = <0x0e>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c3_mag3110_int>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <16 IRQ_TYPE_EDGE_RISING>;
-		vdd-supply = <&reg_sensors>;
-		vddio-supply = <&reg_sensors>;
-	};
-
-	light-sensor@44 {
-		compatible = "isil,isl29023";
-		reg = <0x44>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c3_isl29023_int>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
-		vcc-supply = <&reg_sensors>;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6qdl-sabresd {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
-				MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
-				MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
-				MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x130b0
-				MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0
-				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x1b0b0
-				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
-			>;
-		};
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
-				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
-				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
-				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL1__ECSPI1_MISO	0x100b1
-				MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI	0x100b1
-				MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK	0x100b1
-				MX6QDL_PAD_KEY_ROW1__GPIO4_IO09		0x1b0b0
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			>;
-		};
-
-		pinctrl_gpio_keys: gpio_keysgrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04  0x1b0b0
-				MX6QDL_PAD_GPIO_5__GPIO1_IO05  0x1b0b0
-			>;
-		};
-
-		pinctrl_hdmi_cec: hdmicecgrp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE	0x1f8b0
-			>;
-		};
-
-		pinctrl_hp: hpgrp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_RST__GPIO7_IO08          0x1b0b0
-				MX6QDL_PAD_GPIO_9__GPIO1_IO09           0x1b0b0
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
-				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c1_mma8451_int: i2c1mma8451intgrp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__GPIO1_IO18		0xb0b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2_egalax_int: i2c2egalaxintgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x1b0b0
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3_isl29023_int: i2c3isl29023intgrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0xb0b1
-			>;
-		};
-
-		pinctrl_i2c3_mag3110_int: i2c3mag3110intgrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D16__GPIO3_IO16		0xb0b1
-			>;
-		};
-
-		pinctrl_ipu1_csi0: ipu1csi0grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18    0x1b0b0
-				MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19    0x1b0b0
-				MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK   0x1b0b0
-				MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC      0x1b0b0
-				MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC     0x1b0b0
-			>;
-		};
-
-		pinctrl_ov5640: ov5640grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x1b0b0
-				MX6QDL_PAD_SD1_CLK__GPIO1_IO20  0x1b0b0
-			>;
-		};
-
-		pinctrl_ov5642: ov5642grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0
-				MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0
-			>;
-		};
-
-		pinctrl_pcie: pciegrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_17__GPIO7_IO12	0x1b0b0
-			>;
-		};
-
-		pinctrl_pcie_reg: pciereggrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D19__GPIO3_IO19	0x1b0b0
-			>;
-		};
-
-		pinctrl_pwm1: pwm1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT3__PWM1_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_sensors_reg: sensorsreggrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_EB3__GPIO2_IO31		0x1b0b0
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-				MX6QDL_PAD_NANDF_D4__SD2_DATA4		0x17059
-				MX6QDL_PAD_NANDF_D5__SD2_DATA5		0x17059
-				MX6QDL_PAD_NANDF_D6__SD2_DATA6		0x17059
-				MX6QDL_PAD_NANDF_D7__SD2_DATA7		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
-				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
-				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
-				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
-				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
-				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
-				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
-			>;
-		};
-
-		pinctrl_wdog: wdoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__WDOG2_B		0x1b0b0
-			>;
-		};
-	};
-
-	gpio_leds {
-		pinctrl_gpio_leds: gpioledsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
-			>;
-		};
-	};
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@1 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
-	vpcie-supply = <&reg_pcie>;
-	status = "okay";
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&reg_arm {
-       vin-supply = <&sw1a_reg>;
-};
-
-&reg_pu {
-       vin-supply = <&sw1c_reg>;
-};
-
-&reg_soc {
-       vin-supply = <&sw1c_reg>;
-};
-
-&reg_vdd1p1 {
-	vin-supply = <&vgen5_reg>;
-};
-
-&reg_vdd2p5 {
-	vin-supply = <&vgen5_reg>;
-};
-
-&snvs_poweroff {
-	status = "okay";
-};
-
-&snvs_pwrkey {
-	status = "okay";
-};
-
-&ssi2 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	bus-width = <8>;
-	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	bus-width = <8>;
-	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <8>;
-	non-removable;
-	no-1-8-v;
-	status = "okay";
-};
-
-&wdog1 {
-	status = "disabled";
-};
-
-&wdog2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-skov-cpu-revc.dtsi b/arch/arm/boot/dts/imx6qdl-skov-cpu-revc.dtsi
deleted file mode 100644
index 69ae430a53bd..000000000000
--- a/arch/arm/boot/dts/imx6qdl-skov-cpu-revc.dtsi
+++ /dev/null
@@ -1,54 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-//
-// Copyright (C) 2020 Pengutronix, Ulrich Oelmann <kernel@pengutronix.de>
-
-&ecspi4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi4>;
-	cs-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	touchscreen@0 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_touch>;
-		compatible = "ti,tsc2046";
-		reg = <0>;
-		spi-max-frequency = <1000000>;
-		interrupts-extended = <&gpio3 19 IRQ_TYPE_LEVEL_LOW>;
-		vcc-supply  = <&reg_3v3>;
-		pendown-gpio = <&gpio3 19 GPIO_ACTIVE_LOW>;
-		ti,x-plate-ohms = /bits/ 16 <850>;
-		ti,y-plate-ohms = /bits/ 16 <295>;
-		ti,pressure-min = /bits/ 16 <2>;
-		ti,pressure-max = /bits/ 16 <1500>;
-		ti,vref-mv	= /bits/ 16 <3300>;
-		ti,settle-delay-usec = /bits/ 16 <15>;
-		ti,vref-delay-usecs = /bits/ 16 <0>;
-		ti,penirq-recheck-delay-usecs = /bits/ 16 <100>;
-		ti,debounce-max = /bits/ 16 <100>;
-		ti,debounce-tol = /bits/ 16 <(~0)>;
-		ti,debounce-rep = /bits/ 16 <4>;
-		touchscreen-swapped-x-y;
-		touchscreen-inverted-y;
-		wakeup-source;
-	};
-};
-
-&iomuxc {
-	pinctrl_ecspi4: ecspi4grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D28__ECSPI4_MOSI			0x100b1
-			MX6QDL_PAD_EIM_D22__ECSPI4_MISO			0x000b1
-			MX6QDL_PAD_EIM_D21__ECSPI4_SCLK			0x000b1
-			/* *no* external pull up */
-			MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x40000058
-		>;
-	};
-
-	pinctrl_touch: touchgrp {
-		fsl,pins = <
-			/* external pull up */
-			MX6QDL_PAD_EIM_D19__GPIO3_IO19			0x10040
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-solidsense.dtsi b/arch/arm/boot/dts/imx6qdl-solidsense.dtsi
deleted file mode 100644
index 234827e554d0..000000000000
--- a/arch/arm/boot/dts/imx6qdl-solidsense.dtsi
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * Copyright (C) 2021 Russell King <rmk@armlinux.org.uk>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-#include <dt-bindings/leds/common.h>
-
-/ {
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_solidsense_leds>;
-
-		/* Red/Green LED1 - next to WiFi SMA */
-		led-11 {
-			color = <LED_COLOR_ID_RED>;
-			function = LED_FUNCTION_INDICATOR;
-			function-enumerator = <0>;
-			gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
-		};
-
-		led-12 {
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_INDICATOR;
-			function-enumerator = <0>;
-			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
-		};
-
-		/* Red/Green LED2 - next to GPS SMA */
-		led-21 {
-			color = <LED_COLOR_ID_RED>;
-			function = LED_FUNCTION_INDICATOR;
-			function-enumerator = <1>;
-			gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
-		};
-
-		led-22 {
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_INDICATOR;
-			function-enumerator = <1>;
-			gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&audio {
-	status = "disabled";
-};
-
-&ecspi2 {
-	status = "disabled";
-};
-
-&i2c3 {
-	status = "disabled";
-};
-
-&iomuxc {
-	pinctrl-0 = <&pinctrl_hog>, <&pinctrl_solidsense_hog>;
-
-	solidsense {
-		pinctrl_solidsense_hog: solidsense-hog {
-			fsl,pins = <
-				/* Nordic RESET_N */
-				MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x400130b1
-				/* Nordic Chip 1 SWDIO - GPIO 125 */
-				MX6QDL_PAD_DISP0_DAT8__GPIO4_IO29 0x400130b1
-				/* Nordic Chip 1 SWDCLK - GPIO 59 */
-				/* already claimed in the HB2 hogs */
-				/* MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x400130b1 */
-				/* Nordic Chip 2 SWDIO - GPIO 81 */
-				MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x400130b1
-				/* Nordic Chip 2 SWCLK - GPIO 82 */
-				MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x400130b1
-			>;
-		};
-
-		pinctrl_solidsense_leds: solidsense-leds {
-			fsl,pins = <
-				/* Red LED 1 - GPIO 58 */
-				MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x400130b1
-				/* Green LED 1 - GPIO 55 */
-				MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x400130b1
-				/* Red LED 2 - GPIO 57 */
-				MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x400130b1
-				/* Green LED 2 - GPIO 56 */
-				MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x400130b1
-			>;
-		};
-
-		pinctrl_solidsense_uart2: solidsense-uart2 {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_solidsense_uart3: solidsense-uart3 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-			>;
-		};
-	};
-};
-
-&pwm1 {
-	status = "disabled";
-};
-
-&sgtl5000 {
-	status = "disabled";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_solidsense_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_solidsense_uart3>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-sr-som-brcm.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som-brcm.dtsi
deleted file mode 100644
index b55af61dfeca..000000000000
--- a/arch/arm/boot/dts/imx6qdl-sr-som-brcm.dtsi
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * Copyright (C) 2013,2014 Russell King
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-#include <dt-bindings/gpio/gpio.h>
-/ {
-	clk_brcm: brcm-clock {
-		compatible = "gpio-gate-clock";
-		#clock-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_microsom_brcm_osc>;
-		enable-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
-	};
-
-	reg_brcm: brcm-reg {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio3 19 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_microsom_brcm_reg>;
-		regulator-name = "brcm_reg";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <200000>;
-	};
-
-	usdhc1_pwrseq: usdhc1_pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>,
-			      <&gpio6 0 GPIO_ACTIVE_LOW>;
-		clocks = <&clk_brcm>;
-		clock-names = "ext_clock";
-	};
-};
-
-&iomuxc {
-	microsom {
-		pinctrl_microsom_brcm_bt: microsom-brcm-bt {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00	0x40013070
-				MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01	0x40013070
-				MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04	0x40013070
-			>;
-		};
-
-		pinctrl_microsom_brcm_osc: microsom-brcm-osc {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05	0x40013070
-			>;
-		};
-
-		pinctrl_microsom_brcm_reg: microsom-brcm-reg {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x40013070
-			>;
-		};
-
-		pinctrl_microsom_brcm_wifi: microsom-brcm-wifi {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K	0x1b0b0
-				MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x40013070
-				MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26	0x40013070
-				MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27	0x40013070
-			>;
-		};
-
-		pinctrl_microsom_uart4: microsom-uart4 {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
-				MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
-				MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
-				MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
-			>;
-		};
-
-		pinctrl_microsom_usdhc1: microsom-usdhc1 {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
-				MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
-				MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
-				MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
-				MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
-				MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
-			>;
-		};
-	};
-};
-
-/* UART4 - Connected to optional BRCM Wifi/BT/FM */
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_microsom_brcm_bt &pinctrl_microsom_uart4>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-/* USDHC1 - Connected to optional BRCM Wifi/BT/FM */
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_microsom_brcm_wifi &pinctrl_microsom_usdhc1>;
-	bus-width = <4>;
-	mmc-pwrseq = <&usdhc1_pwrseq>;
-	keep-power-in-suspend;
-	no-1-8-v;
-	non-removable;
-	vmmc-supply = <&reg_brcm>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
deleted file mode 100644
index f86efd0ccc40..000000000000
--- a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * Copyright (C) 2013,2014 Russell King
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	vcc_3v3: regulator-vcc-3v3 {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-name = "vcc_3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_microsom_enet_ar8035>;
-	phy-mode = "rgmii-id";
-
-	/*
-	 * The PHY seems to require a long-enough reset duration to avoid
-	 * some rare issues where the PHY gets stuck in an inconsistent and
-	 * non-functional state at boot-up. 10ms proved to be fine .
-	 */
-	phy-reset-duration = <10>;
-	phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/*
-		 * The PHY can appear at either address 0 or 4 due to the
-		 * configuration (LED) pin not being pulled sufficiently.
-		 */
-		ethernet-phy@0 {
-			reg = <0>;
-			qca,clk-out-frequency = <125000000>;
-			qca,smarteee-tw-us-1g = <24>;
-		};
-
-		ethernet-phy@4 {
-			reg = <4>;
-			qca,clk-out-frequency = <125000000>;
-			qca,smarteee-tw-us-1g = <24>;
-		};
-	};
-};
-
-&iomuxc {
-	microsom {
-		pinctrl_microsom_enet_ar8035: microsom-enet-ar8035 {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b8b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				/* AR8035 reset */
-				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x130b0
-				/* AR8035 interrupt */
-				MX6QDL_PAD_DI0_PIN2__GPIO4_IO18		0x1b0b0
-				/* GPIO16 -> AR8035 25MHz */
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x13030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x0a0b1
-				/* AR8035 pin strapping: IO voltage: pull up */
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				/* AR8035 pin strapping: PHYADDR#0: pull down */
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030
-				/* AR8035 pin strapping: PHYADDR#1: pull down */
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030
-				/* AR8035 pin strapping: MODE#1: pull up */
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				/* AR8035 pin strapping: MODE#3: pull up */
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				/* AR8035 pin strapping: MODE#0: pull down */
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x13030
-
-				/*
-				 * As the RMII pins are also connected to RGMII
-				 * so that an AR8030 can be placed, set these
-				 * to high-z with the same pulls as above.
-				 * Use the GPIO settings to avoid changing the
-				 * input select registers.
-				 */
-				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x03000
-				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x03000
-				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x03000
-			>;
-		};
-
-		pinctrl_microsom_uart1: microsom-uart1 {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_microsom_uart1>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi b/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi
deleted file mode 100644
index b679bec78e6c..000000000000
--- a/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi
+++ /dev/null
@@ -1,28 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Sascha Hauer, Pengutronix
- * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
- */
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	clock-frequency = <100000>;
-	status = "okay";
-
-	pmic: pmic@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-	};
-
-	sensor@48 {
-		compatible = "national,lm75";
-		reg = <0x48>;
-	};
-
-	eeprom@50 {
-		compatible = "st,24c64", "atmel,24c64";
-		reg = <0x50>;
-		pagesize = <32>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi b/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi
deleted file mode 100644
index 49c472285c06..000000000000
--- a/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi
+++ /dev/null
@@ -1,28 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Sascha Hauer, Pengutronix
- * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
- */
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	clock-frequency = <100000>;
-	status = "okay";
-
-	pmic: pmic@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-	};
-
-	sensor@48 {
-		compatible = "national,lm75";
-		reg = <0x48>;
-	};
-
-	eeprom@50 {
-		compatible = "st,24c64", "atmel,24c64";
-		reg = <0x50>;
-		pagesize = <32>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi b/arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi
deleted file mode 100644
index 79f2354886b7..000000000000
--- a/arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi
+++ /dev/null
@@ -1,251 +0,0 @@
-/*
- * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/ {
-	aliases {
-		display = &display;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_lcd1_pwr>;
-		enable-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;
-		power-supply = <&reg_3v3>;
-		turn-on-delay-ms = <35>;
-		/*
-		 * a poor man's way to create a 1:1 relationship between
-		 * the PWM value and the actual duty cycle
-		 */
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-	};
-
-	lcd_panel: lcd-panel {
-		compatible = "edt,etm0700g0dh6";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_lcd0_pwr>;
-		enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
-		power-supply = <&reg_3v3>;
-		backlight = <&backlight>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_out>;
-			};
-		};
-	};
-
-	display: disp0 {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_disp0_1>;
-		status = "okay";
-
-		port@0 {
-			reg = <0>;
-
-			lcd_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-
-		display-timings {
-			VGA {
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <48>;
-				hsync-len = <96>;
-				hfront-porch = <16>;
-				vback-porch = <31>;
-				vsync-len = <2>;
-				vfront-porch = <12>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ETV570 {
-				u-boot,panel-name = "edt,et057090dhu";
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <114>;
-				hsync-len = <30>;
-				hfront-porch = <16>;
-				vback-porch = <32>;
-				vsync-len = <3>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0350 {
-				u-boot,panel-name = "edt,et0350g0dh6";
-				clock-frequency = <6413760>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <34>;
-				hsync-len = <34>;
-				hfront-porch = <20>;
-				vback-porch = <15>;
-				vsync-len = <3>;
-				vfront-porch = <4>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0430 {
-				u-boot,panel-name = "edt,et0430g0dh6";
-				clock-frequency = <9009000>;
-				hactive = <480>;
-				vactive = <272>;
-				hback-porch = <2>;
-				hsync-len = <41>;
-				hfront-porch = <2>;
-				vback-porch = <2>;
-				vsync-len = <10>;
-				vfront-porch = <2>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			ET0500 {
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0700 { /* same as ET0500 */
-				u-boot,panel-name = "edt,etm0700g0dh6";
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ETQ570 {
-				clock-frequency = <6596040>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <38>;
-				hsync-len = <30>;
-				hfront-porch = <30>;
-				vback-porch = <16>;
-				vsync-len = <3>;
-				vfront-porch = <4>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			CoMTFT { /* same as ET0700 but with inverted pixel clock */
-				u-boot,panel-name = "edt,etm0700g0edh6";
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&lcd_in>;
-};
diff --git a/arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi b/arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi
deleted file mode 100644
index 2ca2eb37e14f..000000000000
--- a/arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi
+++ /dev/null
@@ -1,286 +0,0 @@
-/*
- * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/ {
-	aliases {
-		display = &lvds0;
-		lvds0 = &lvds0;
-		lvds1 = &lvds1;
-	};
-
-	backlight0: backlight0 {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 500000 0>;
-		power-supply = <&reg_lcd0_pwr>;
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-	};
-
-	backlight1: backlight1 {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 500000 0>;
-		power-supply = <&reg_lcd1_pwr>;
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-	};
-
-	lvds0_panel: lvds0-panel {
-		compatible = "nlt,nl12880bc20-spwg-24";
-		backlight = <&backlight0>;
-		power-supply = <&reg_3v3>;
-
-		port {
-			panel_in_lvds0: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-
-	lvds1_panel: lvds1-panel {
-		compatible = "nlt,nl12880bc20-spwg-24";
-		backlight = <&backlight1>;
-		power-supply = <&reg_3v3>;
-
-		port {
-			panel_in_lvds1: endpoint {
-				remote-endpoint = <&lvds1_out>;
-			};
-		};
-	};
-};
-
-&kpp {
-	status = "disabled"; /* pad conflict with backlight1 PWM */
-};
-
-&ldb {
-	status = "okay";
-
-	lvds0: lvds-channel@0 {
-		fsl,data-width = <18>;
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in_lvds0>;
-			};
-		};
-
-		display-timings {
-			hsd100pxn1 {
-				u-boot,panel-name = "hannstar,hsd100pxn1";
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			VGA {
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <48>;
-				hfront-porch = <16>;
-				vback-porch = <31>;
-				vfront-porch = <12>;
-				hsync-len = <96>;
-				vsync-len = <2>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			nl12880bc20 {
-				u-boot,panel-name = "nlt,nl12880bc20-spwg-24";
-				clock-frequency = <71000000>;
-				hactive = <1280>;
-				vactive = <800>;
-				hback-porch = <50>;
-				hfront-porch = <50>;
-				vback-porch = <5>;
-				vfront-porch = <5>;
-				hsync-len = <60>;
-				vsync-len = <13>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			ET0700 {
-				u-boot,panel-name = "edt,etm0700g0dh6";
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ETV570 {
-				u-boot,panel-name = "edt,et057090dhu";
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <114>;
-				hsync-len = <30>;
-				hfront-porch = <16>;
-				vback-porch = <32>;
-				vsync-len = <3>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-	};
-
-	lvds1: lvds-channel@1 {
-		fsl,data-width = <18>;
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds1_out: endpoint {
-				remote-endpoint = <&panel_in_lvds1>;
-			};
-		};
-
-		display-timings {
-			hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			VGA {
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <48>;
-				hfront-porch = <16>;
-				vback-porch = <31>;
-				vfront-porch = <12>;
-				hsync-len = <96>;
-				vsync-len = <2>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			nl12880bc20 {
-				clock-frequency = <71000000>;
-				hactive = <1280>;
-				vactive = <800>;
-				hback-porch = <50>;
-				hfront-porch = <50>;
-				vback-porch = <5>;
-				vfront-porch = <5>;
-				hsync-len = <60>;
-				vsync-len = <13>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&reg_lcd0_pwr {
-	status = "okay";
-};
-
-&reg_lcd1_pwr {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi b/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi
deleted file mode 100644
index 410972e1dca9..000000000000
--- a/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/ {
-	backlight0 {
-		pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>;
-		turn-on-delay-ms = <35>;
-		power-supply = <&reg_lcd1_pwr>;
-	};
-
-	backlight1 {
-		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
-		turn-on-delay-ms = <35>;
-		power-supply = <&reg_lcd1_pwr>;
-	};
-
-	lcd-panel {
-		compatible = "edt,et057090dhu";
-		pixelclk-active = <0>;
-	};
-
-	lvds0-panel {
-		compatible = "edt,etml1010g0dka";
-		pixelclk-active = <0>;
-	};
-
-	lvds1-panel {
-		compatible = "edt,etml1010g0dka";
-		pixelclk-active = <0>;
-	};
-};
-
-&can1 {
-	status = "disabled";
-};
-
-&can2 {
-	xceiver-supply = <&reg_3v3>;
-};
-
-&ds1339 {
-	/*
-	 * The backup voltage of the module internal RTC is not wired
-	 * by default on the MB7, so disable that RTC chip.
-	 */
-	status = "disabled";
-};
-
-&i2c3 {
-	rtc: mcp7940x@6f {
-		compatible = "microchip,mcp7940x";
-		reg = <0x6f>;
-	};
-};
-
-&reg_lcd0_pwr {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
deleted file mode 100644
index d07d8f83456d..000000000000
--- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi
+++ /dev/null
@@ -1,324 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- */
-
-/ {
-	aliases {
-		backlight = &backlight;
-		panelchan = &panelchan;
-		panel7 = &panel7;
-		touchscreenp7 = &touchscreenp7;
-	};
-
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	backlight: backlight {
-		compatible = "gpio-backlight";
-		gpios = <&gpio1 4 0>;
-		default-on;
-		status = "disabled";
-	};
-
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		gpios = <&gpio2 4 0>;
-		pinctrl-0 = <&pinctrl_power_off>;
-		pinctrl-names = "default";
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	panel7: panel7 {
-		/*
-		 * in reality it is a -20t (parallel) model,
-		 * but with LVDS bridge chip attached,
-		 * so it is equivalent to -19t model in drive
-		 * characteristics
-		 */
-		compatible = "urt,umsh-8596md-19t";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_panel>;
-		power-supply = <&reg_panel>;
-		backlight = <&backlight>;
-		status = "disabled";
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb_h1_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			startup-delay-us = <2>; /* USB2415 requires a POR of 1 us minimum */
-			gpio = <&gpio7 12 0>;
-		};
-
-		reg_panel: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "lcd_panel";
-			enable-active-high;
-			gpio = <&gpio1 2 0>;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx6q-udoo-ac97",
-			     "fsl,imx-audio-ac97";
-		model = "fsl,imx6q-udoo-ac97";
-		audio-cpu = <&ssi1>;
-		audio-routing =
-			"RX", "Mic Jack",
-			"Headphone Jack", "TX";
-		mux-int-port = <1>;
-		mux-ext-port = <6>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	touchscreenp7: touchscreenp7@55 {
-		compatible = "sitronix,st1232";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_touchscreenp7>;
-		reg = <0x55>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <13 8>;
-		gpios = <&gpio1 15 0>;
-		status = "disabled";
-	};
-};
-
-&iomuxc {
-	imx6q-udoo {
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001f8b1
-				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001f8b1
-			>;
-		};
-
-		pinctrl_panel: panelgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x70
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x70
-			>;
-		};
-
-		pinctrl_power_off: poweroffgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x30
-			>;
-		};
-
-		pinctrl_touchscreenp7: touchscreenp7grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_DAT0__GPIO1_IO15		0x70
-				MX6QDL_PAD_SD2_DAT2__GPIO1_IO13		0x1b0b0
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart4: uart4grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
-				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbh: usbhgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000
-				MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0
-			>;
-		};
-
-		pinctrl_usbotg: usbotg {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
-				MX6QDL_PAD_EIM_D22__USB_OTG_PWR 0x17059
-				MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_ac97_running: ac97running {
-			fsl,pins = <
-				MX6QDL_PAD_DI0_PIN2__AUD6_TXD		0x1b0b0
-				MX6QDL_PAD_DI0_PIN3__AUD6_TXFS		0x1b0b0
-				MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x13080
-				MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x13080
-				MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
-			>;
-		};
-
-		pinctrl_ac97_warm_reset: ac97warmreset {
-			fsl,pins = <
-				MX6QDL_PAD_DI0_PIN2__AUD6_TXD		0x1b0b0
-				MX6QDL_PAD_DI0_PIN3__GPIO4_IO19		0x1b0b0
-				MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x13080
-				MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x13080
-				MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
-			>;
-		};
-
-		pinctrl_ac97_reset: ac97reset {
-			fsl,pins = <
-				MX6QDL_PAD_DI0_PIN2__GPIO4_IO18		0x1b0b0
-				MX6QDL_PAD_DI0_PIN3__GPIO4_IO19		0x1b0b0
-				MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x13080
-				MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x13080
-				MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
-			>;
-		};
-	};
-};
-
-&ldb {
-	status = "okay";
-
-	panelchan: lvds-channel@0 {
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&usbh1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh>;
-	vbus-supply = <&reg_usb_h1_vbus>;
-	clocks = <&clks IMX6QDL_CLK_CKO>;
-	status = "okay";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	non-removable;
-	status = "okay";
-};
-
-&audmux {
-	status = "okay";
-};
-
-&ssi1 {
-	cell-index = <0>;
-	fsl,mode = "ac97-slave";
-	pinctrl-names = "ac97-running", "ac97-reset", "ac97-warm-reset";
-	pinctrl-0 = <&pinctrl_ac97_running>;
-	pinctrl-1 = <&pinctrl_ac97_reset>;
-	pinctrl-2 = <&pinctrl_ac97_warm_reset>;
-	ac97-gpios = <&gpio4 19 0 &gpio4 18 0 &gpio2 30 0>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
deleted file mode 100644
index b9e305774fed..000000000000
--- a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
+++ /dev/null
@@ -1,842 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (c) 2014 Protonic Holland
- * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
- */
-
-#include <dt-bindings/display/sdtv-standards.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/media/tvp5150.h>
-#include <dt-bindings/sound/fsl-imx-audmux.h>
-
-/ {
-	chosen {
-		stdout-path = &uart4;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_backlight>;
-		pwms = <&pwm1 0 5000000 0>;
-		brightness-levels = <0 16 64 255>;
-		num-interpolated-steps = <16>;
-		default-brightness-level = <1>;
-		power-supply = <&reg_3v3>;
-		enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
-	};
-
-	connector {
-		compatible = "composite-video-connector";
-		label = "Composite0";
-		sdtv-standards = <SDTV_STD_PAL_B>;
-
-		port {
-			comp0_out: endpoint {
-				remote-endpoint = <&tvp5150_comp0_in>;
-			};
-		};
-	};
-
-	counter-0 {
-		compatible = "interrupt-counter";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_counter0>;
-		gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-	};
-
-	counter-1 {
-		compatible = "interrupt-counter";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_counter1>;
-		gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-	};
-
-	counter-2 {
-		compatible = "interrupt-counter";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_counter2>;
-		gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		autorepeat;
-
-		power {
-			label = "Power Button";
-			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_leds>;
-
-		led-0 {
-			label = "LED_DI0_DEBUG_0";
-			function = LED_FUNCTION_HEARTBEAT;
-			gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		led-1 {
-			label = "LED_DI0_DEBUG_1";
-			function = LED_FUNCTION_DISK;
-			gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "disk-activity";
-		};
-
-		led-2 {
-			label = "POWER_LED";
-			function = LED_FUNCTION_POWER;
-			gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-	};
-
-	panel {
-		compatible = "kyo,tcg121xglp";
-		backlight = <&backlight>;
-		power-supply = <&reg_3v3>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-
-	reg_1v8: regulator-1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "1v8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	reg_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_h1_vbus: regulator-h1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "h1-vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_otg_vbus: regulator-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "otg-vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_wifi: regulator-wifi {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_wifi_npd>;
-		regulator-name = "wifi";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		startup-delay-us = <70000>;
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "prti6q-sgtl5000";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,widgets =
-			"Microphone", "Microphone Jack",
-			"Line", "Line In Jack",
-			"Headphone", "Headphone Jack",
-			"Speaker", "External Speaker";
-		simple-audio-card,routing =
-			"MIC_IN", "Microphone Jack",
-			"LINE_IN", "Line In Jack",
-			"Headphone Jack", "HP_OUT",
-			"External Speaker", "LINE_OUT";
-
-		simple-audio-card,cpu {
-			sound-dai = <&ssi1>;
-			system-clock-frequency = <0>; /* Do NOT call fsl_ssi_set_dai_sysclk! */
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&codec>;
-			bitclock-master;
-			frame-master;
-		};
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-
-	mux-ssi1 {
-		fsl,audmux-port = <0>;
-		fsl,port-config = <
-			IMX_AUDMUX_V2_PTCR_SYN		0
-			IMX_AUDMUX_V2_PTCR_TFSEL(2)	0
-			IMX_AUDMUX_V2_PTCR_TCSEL(2)	0
-			IMX_AUDMUX_V2_PTCR_TFSDIR	0
-			IMX_AUDMUX_V2_PTCR_TCLKDIR	IMX_AUDMUX_V2_PDCR_RXDSEL(2)
-		>;
-	};
-
-	mux-pins3 {
-		fsl,audmux-port = <2>;
-		fsl,port-config = <
-			IMX_AUDMUX_V2_PTCR_SYN		IMX_AUDMUX_V2_PDCR_RXDSEL(0)
-			0				IMX_AUDMUX_V2_PDCR_TXRXEN
-		>;
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can2>;
-	status = "okay";
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <20000000>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	phy-handle = <&rgmii_phy>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* Microchip KSZ9031RNX PHY */
-		rgmii_phy: ethernet-phy@0 {
-			reg = <0>;
-			interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
-			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <10000>;
-			reset-deassert-us = <300>;
-		};
-	};
-};
-
-&gpio1 {
-	gpio-line-names =
-		"CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR",
-			"CAM2_MIRROR", "", "", "SMBALERT",
-		"DEBUG_0", "DEBUG_1", "SDIO_SCK", "SDIO_CMD", "SDIO_D3",
-			"SDIO_D2", "SDIO_D1", "SDIO_D0",
-		"SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK",
-			"SD1_DATA3", "", "",
-		"", "ETH_RESET", "WIFI_PD", "WIFI_BT_RST", "ETH_INT", "",
-			"WL_IRQ", "ETH_MDC";
-};
-
-&gpio2 {
-	gpio-line-names =
-		"count0", "count1", "count2", "", "", "", "", "",
-		"REV_ID0", "REV_ID1", "REV_ID2", "REV_ID3", "REV_ID4",
-			"BOARD_ID0", "BOARD_ID1", "BOARD_ID2",
-		"", "", "", "", "", "", "", "ON_SWITCH",
-		"POWER_LED", "", "ECSPI2_SS0", "", "", "", "", "";
-};
-
-&gpio3 {
-	gpio-line-names =
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"ECSPI1_SCLK", "ECSPI1_MISO", "ECSPI1_MOSI", "ECSPI1_SS1",
-			"CPU_ON1_FB", "USB_OTG_OC", "USB_OTG_PWR", "YACO_IRQ",
-		"", "", "", "", "", "", "", "";
-};
-
-&gpio4 {
-	gpio-line-names =
-		"", "", "", "", "", "", "UART4_TXD", "UART4_RXD",
-		"UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR",
-			"CAN2_SR", "CAN2_TX", "CAN2_RX",
-		"LED_DI0_DEBUG_0", "LED_DI0_DEBUG_1", "", "", "", "", "", "",
-		"", "", "", "", "BL_EN", "BL_PWM", "", "";
-};
-
-&gpio5 {
-	gpio-line-names =
-		"", "", "", "", "", "PCIE_WAKE", "PCIE_CLKREQ", "PCIE_W_DIS",
-		"PCIE_RESET", "", "", "", "", "", "", "",
-		"", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET",
-			"I2S_BITCLK", "I2S_DOUT",
-		"I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX",
-			"YACO_AUX_TX", "ITU656_D0", "ITU656_D1";
-};
-
-&gpio6 {
-	gpio-line-names =
-		"ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5",
-			"ITU656_D6", "ITU656_D7", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "RGMII_TXC", "RGMII_TD0", "RGMII_TD1", "RGMII_TD2",
-			"RGMII_TD3",
-		"RGMII_RX_CTL", "RGMII_RD0", "RGMII_TX_CTL", "RGMII_RD1",
-			"RGMII_RD2", "RGMII_RD3", "", "";
-};
-
-&gpio7 {
-	gpio-line-names =
-		"EMMC_DAT5", "EMMC_DAT4", "EMMC_CMD", "EMMC_CLK", "EMMC_DAT0",
-			"EMMC_DAT1", "EMMC_DAT2", "EMMC_DAT3",
-		"EMMC_RST", "", "", "", "CAM_DETECT", "", "", "",
-		"", "EMMC_DAT7", "EMMC_DAT6", "", "", "", "", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	codec: audio-codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0xa>;
-		#sound-dai-cells = <0>;
-		clocks = <&clks 201>;
-		VDDA-supply = <&reg_3v3>;
-		VDDIO-supply = <&reg_3v3>;
-		VDDD-supply = <&reg_1v8>;
-	};
-
-	video-decoder@5c {
-		compatible = "ti,tvp5150";
-		reg = <0x5c>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-
-			tvp5150_comp0_in: endpoint {
-				remote-endpoint = <&comp0_out>;
-			};
-		};
-
-		/* Output port 2 is video output pad */
-		port@2 {
-			reg = <2>;
-
-			tvp5151_to_ipu1_csi0_mux: endpoint {
-				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	adc@49 {
-		compatible = "ti,ads1015";
-		reg = <0x49>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		channel@4 {
-			reg = <4>;
-			ti,gain = <3>;
-			ti,datarate = <3>;
-		};
-
-		channel@5 {
-			reg = <5>;
-			ti,gain = <3>;
-			ti,datarate = <3>;
-		};
-
-		channel@6 {
-			reg = <6>;
-			ti,gain = <3>;
-			ti,datarate = <3>;
-		};
-
-		channel@7 {
-			reg = <7>;
-			ti,gain = <3>;
-			ti,datarate = <3>;
-		};
-	};
-
-	rtc@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-
-	temperature-sensor@70 {
-		compatible = "ti,tmp103";
-		reg = <0x70>;
-	};
-};
-
-&ipu1_csi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ipu1_csi0>;
-	status = "okay";
-};
-
-&ipu1_csi0_mux_from_parallel_sensor {
-	remote-endpoint = <&tvp5151_to_ipu1_csi0_mux>;
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
-
-&pcie {
-	status = "okay";
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&ssi1 {
-	#sound-dai-cells = <0>;
-	fsl,mode = "ac97-slave";
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_h1_vbus>;
-	pinctrl-names = "default";
-	phy_type = "utmi";
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	phy_type = "utmi";
-	dr_mode = "host";
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-	no-1-8-v;
-	disable-wp;
-	cap-sd-highspeed;
-	no-mmc;
-	no-sdio;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	vmmc-supply = <&reg_wifi>;
-	non-removable;
-	cap-power-off-card;
-	keep-power-in-suspend;
-	no-1-8-v;
-	no-mmc;
-	no-sd;
-	status = "okay";
-
-	wifi {
-		compatible = "ti,wl1271";
-		interrupts-extended = <&gpio1 30 IRQ_TYPE_LEVEL_HIGH>;
-		ref-clock-frequency = "38400000";
-		tcxo-clock-frequency = "19200000";
-	};
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	bus-width = <8>;
-	no-1-8-v;
-	non-removable;
-	no-sd;
-	no-sdio;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	pinctrl_audmux: audmuxgrp {
-		fsl,pins = <
-			/* SGTL5000 sys_mclk */
-			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1			0x030b0
-			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD			0x130b0
-			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC			0x130b0
-			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD			0x110b0
-			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS			0x130b0
-		>;
-	};
-
-	pinctrl_backlight: backlightgrp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28		0x1b0b0
-		>;
-	};
-
-	pinctrl_can1: can1grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX		0x1b000
-			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX		0x3008
-			/* CAN1_SR */
-			MX6QDL_PAD_KEY_COL3__GPIO4_IO12			0x13008
-			/* CAN1_TERM */
-			MX6QDL_PAD_GPIO_0__GPIO1_IO00			0x1b088
-		>;
-	};
-
-	pinctrl_can2: can2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX		0x1b000
-			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX		0x3008
-			/* CAN2_SR */
-			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13			0x13008
-		>;
-	};
-
-	pinctrl_counter0: counter0grp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_D0__GPIO2_IO00			0x1b000
-		>;
-	};
-
-	pinctrl_counter1: counter1grp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_D1__GPIO2_IO01			0x1b000
-		>;
-	};
-
-	pinctrl_counter2: counter2grp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_D2__GPIO2_IO02			0x1b000
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D17__ECSPI1_MISO			0x100b1
-			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI			0x100b1
-			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK			0x100b1
-			/* CS */
-			MX6QDL_PAD_EIM_D19__GPIO3_IO19			0x000b1
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC			0x1b030
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0			0x1b030
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1			0x1b030
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2			0x1b030
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3			0x1b030
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL		0x1b030
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC			0x10030
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0			0x10030
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1			0x10030
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2			0x10030
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3			0x10030
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL		0x10030
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK		0x10030
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO			0x10030
-			MX6QDL_PAD_ENET_MDC__ENET_MDC			0x10030
-			/* Phy reset */
-			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25		0x1b0b0
-			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28		0x1b0b1
-		>;
-	};
-
-	pinctrl_hog: hoggrp {
-		fsl,pins = <
-			/* ITU656_nRESET */
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02			0x1b0b0
-			/* CAM1_MIRROR */
-			MX6QDL_PAD_GPIO_3__GPIO1_IO03			0x130b0
-			/* CAM2_MIRROR */
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04			0x130b0
-			/* CAM_nDETECT */
-			MX6QDL_PAD_GPIO_17__GPIO7_IO12			0x1b0b0
-			/* nON_SWITCH */
-			MX6QDL_PAD_EIM_CS0__GPIO2_IO23			0x1b0b0
-			/* ISB_IN1 */
-			MX6QDL_PAD_EIM_A16__GPIO2_IO22			0x130b0
-			/* ISB_nIN2 */
-			MX6QDL_PAD_EIM_A17__GPIO2_IO21			0x1b0b0
-			/* WARN_LIGHT */
-			MX6QDL_PAD_EIM_A19__GPIO2_IO19			0x100b0
-			/* ON2_FB */
-			MX6QDL_PAD_EIM_A25__GPIO5_IO02			0x100b0
-			/* YACO_nIRQ */
-			MX6QDL_PAD_EIM_D23__GPIO3_IO23			0x1b0b0
-			/* YACO_BOOT0 */
-			MX6QDL_PAD_EIM_D30__GPIO3_IO30			0x130b0
-			/* YACO_nRESET */
-			MX6QDL_PAD_EIM_D31__GPIO3_IO31			0x1b0b0
-			/* FORCE_ON1 */
-			MX6QDL_PAD_EIM_EB2__GPIO2_IO30			0x1b0b0
-			/* AUDIO_nRESET */
-			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21		0x1f0b0
-			/* ITU656_nPDN */
-			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20		0x1b0b0
-
-			/* HW revision detect */
-			/* REV_ID0 */
-			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08			0x1b0b0
-			/* REV_ID1 */
-			MX6QDL_PAD_SD4_DAT1__GPIO2_IO09			0x1b0b0
-			/* REV_ID2 */
-			MX6QDL_PAD_SD4_DAT2__GPIO2_IO10			0x1b0b0
-			/* REV_ID3 */
-			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11			0x1b0b0
-			/* REV_ID4 */
-			MX6QDL_PAD_SD4_DAT4__GPIO2_IO12			0x1b0b0
-
-			/* New in HW revision 1 */
-			/* ON1_FB */
-			MX6QDL_PAD_EIM_D20__GPIO3_IO20			0x100b0
-			/* DIP1_FB */
-			MX6QDL_PAD_DI0_PIN2__GPIO4_IO18			0x1b0b0
-
-			/* New in UT2: FIXME: ISB PWM should start off, PD */
-			/* ISB_LED_PWM */
-			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30		0x130b0
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001f8b1
-			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001f8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_ipu1_csi0: ipu1csi0grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19		0x1b0b0
-			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK	0x1b0b0
-		>;
-	};
-
-	pinctrl_leds: ledsgrp {
-		fsl,pins = <
-			/* DEBUG0 */
-			MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16		0x1b0b0
-			/* DEBUG1 */
-			MX6QDL_PAD_DI0_PIN15__GPIO4_IO17		0x1b0b0
-			/* POWER_LED */
-			MX6QDL_PAD_EIM_CS1__GPIO2_IO24			0x1b0b0
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT8__PWM1_OUT			0x1b0b0
-		>;
-	};
-
-	/* YaCO AUX Uart */
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA		0x1b0b1
-			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D26__UART2_RX_DATA		0x1b0b1
-			MX6QDL_PAD_EIM_D27__UART2_TX_DATA		0x1b0b1
-			MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B		0x1b0b1
-			MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B		0x1b0b1
-		>;
-	};
-
-	/* YaCO Touchscreen UART */
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D24__UART3_TX_DATA		0x1b0b1
-			MX6QDL_PAD_EIM_D25__UART3_RX_DATA		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA		0x1b0b1
-			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA		0x1b0b1
-			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA		0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__USB_OTG_OC			0x1b0b0
-			/* power enable, high active */
-			MX6QDL_PAD_EIM_D22__GPIO3_IO22			0x1b0b0
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD			0x170f9
-			MX6QDL_PAD_SD1_CLK__SD1_CLK			0x100f9
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0			0x170f9
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1			0x170f9
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2			0x170f9
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3			0x170f9
-			MX6QDL_PAD_GPIO_1__GPIO1_IO01			0x1b0b0
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_CMD__SD2_CMD			0x170b9
-			MX6QDL_PAD_SD2_CLK__SD2_CLK			0x100b9
-			MX6QDL_PAD_SD2_DAT0__SD2_DATA0			0x170b9
-			MX6QDL_PAD_SD2_DAT1__SD2_DATA1			0x170b9
-			MX6QDL_PAD_SD2_DAT2__SD2_DATA2			0x170b9
-			MX6QDL_PAD_SD2_DAT3__SD2_DATA3			0x170b9
-			/* WL12xx IRQ */
-			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30		0x10880
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD			0x17099
-			MX6QDL_PAD_SD3_CLK__SD3_CLK			0x10099
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0			0x17099
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1			0x17099
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2			0x17099
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3			0x17099
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4			0x17099
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5			0x17099
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6			0x17099
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7			0x17099
-			MX6QDL_PAD_SD3_RST__SD3_RESET			0x1b0b1
-		>;
-	};
-
-	pinctrl_wifi_npd: wifinpdgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26		0x1b8b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi
deleted file mode 100644
index e781a45785ed..000000000000
--- a/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi
+++ /dev/null
@@ -1,36 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2013 Freescale Semiconductor, Inc.
-//
-// Author: Fabio Estevam <fabio.estevam@freescale.com>
-
-#include "imx6qdl-wandboard.dtsi"
-
-&iomuxc {
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6qdl-wandboard {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000	/* uSDHC1 CD */
-				MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0x80000000	/* uSDHC3 CD */
-				MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x0f0b0		/* WL_REF_ON */
-				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x0f0b0		/* WL_RST_N */
-				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x000b0		/* WL_REG_ON */
-				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x80000000	/* WL_HOST_WAKE */
-				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x80000000	/* WL_WAKE */
-				MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x80000000	/* RGMII_nRST */
-				MX6QDL_PAD_EIM_DA13__GPIO3_IO13		0x80000000	/* BT_ON */
-				MX6QDL_PAD_EIM_DA14__GPIO3_IO14		0x80000000	/* BT_WAKE */
-				MX6QDL_PAD_EIM_DA15__GPIO3_IO15		0x80000000	/* BT_HOST_WAKE */
-			>;
-		};
-	};
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	non-removable;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi
deleted file mode 100644
index 3874e74703f0..000000000000
--- a/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi
+++ /dev/null
@@ -1,35 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2013 Freescale Semiconductor, Inc.
-//
-// Author: Fabio Estevam <fabio.estevam@freescale.com>
-
-#include "imx6qdl-wandboard.dtsi"
-
-&iomuxc {
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6qdl-wandboard {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000	/* uSDHC1 CD */
-				MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0x80000000	/* uSDHC3 CD */
-				MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00	0x0f0b0		/* WIFI_ON (reset, active low) */
-				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x000b0		/* WL_REG_ON (unused) */
-				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x80000000	/* WL_HOST_WAKE, input */
-				MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31	0x0f0b0		/* GPIO5_IO31 (Wifi Power Enable) */
-				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x80000000	/* WL_WAKE (unused) */
-				MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x80000000	/* BT_ON */
-				MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30	0x80000000	/* BT_WAKE */
-				MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x80000000	/* BT_HOST_WAKE */
-				MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x80000000	/* RGMII_nRST */
-			>;
-		};
-	};
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi
deleted file mode 100644
index bf86b639fdac..000000000000
--- a/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi
+++ /dev/null
@@ -1,193 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2013 Freescale Semiconductor, Inc.
-//
-// Author: Fabio Estevam <fabio.estevam@freescale.com>
-
-#include "imx6qdl-wandboard.dtsi"
-
-/ {
-	reg_eth_phy: regulator-eth-phy {
-		compatible = "regulator-fixed";
-		regulator-name = "ETH_PHY";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio7 13 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	pmic: pfuze100@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&fec {
-	phy-supply = <&reg_eth_phy>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6qdl-wandboard {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000	/* USDHC1 CD */
-				MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0x80000000	/* uSDHC3 CD */
-				MX6QDL_PAD_EIM_D29__GPIO3_IO29   	0x1f0b1		/* RGMII PHY reset */
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_GPIO_16__I2C3_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_spdif: spdifgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_19__SPDIF_OUT		0x1b0b0
-			>;
-		};
-	};
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	bus-width = <4>;
-	no-1-8-v;
-	non-removable;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
deleted file mode 100644
index b62a0dbb033f..000000000000
--- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
+++ /dev/null
@@ -1,378 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	sound {
-		compatible = "fsl,imx6-wandboard-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx6-wandboard-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <3>;
-	};
-
-	sound-spdif {
-		compatible = "fsl,imx-audio-spdif";
-		model = "imx-spdif";
-		spdif-controller = <&spdif>;
-		spdif-out;
-	};
-
-	reg_1p5v: regulator-1p5v {
-		compatible = "regulator-fixed";
-		regulator-name = "1P5V";
-		regulator-min-microvolt = <1500000>;
-		regulator-max-microvolt = <1500000>;
-		regulator-always-on;
-	};
-
-	reg_1p8v: regulator-1p8v {
-		compatible = "regulator-fixed";
-		regulator-name = "1P8V";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-	};
-
-	reg_2p8v: regulator-2p8v {
-		compatible = "regulator-fixed";
-		regulator-name = "2P8V";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		regulator-always-on;
-	};
-
-	reg_2p5v: regulator-2p5v {
-		compatible = "regulator-fixed";
-		regulator-name = "2P5V";
-		regulator-min-microvolt = <2500000>;
-		regulator-max-microvolt = <2500000>;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_usb_otg_vbus: regulator-usbotgvbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbotgvbus>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c1>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	pinctrl-1 = <&pinctrl_i2c2_gpio>;
-	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-
-	codec: sgtl5000@a {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_mclk>;
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-		lrclk-strength = <3>;
-	};
-
-	camera@3c {
-		compatible = "ovti,ov5645";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ov5645>;
-		reg = <0x3c>;
-		clocks = <&clks IMX6QDL_CLK_CKO2>;
-		clock-names = "xclk";
-		clock-frequency = <24000000>;
-		vdddo-supply = <&reg_1p8v>;
-		vdda-supply = <&reg_2p8v>;
-		vddd-supply = <&reg_1p5v>;
-		enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
-
-		port {
-			ov5645_to_mipi_csi2: endpoint {
-				remote-endpoint = <&mipi_csi2_in>;
-				clock-lanes = <0>;
-				data-lanes = <1 2>;
-			};
-		};
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-
-	imx6qdl-wandboard {
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
-				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
-				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
-				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c1_gpio: i2c1gpiogrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x4001b8b0
-				MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x4001b8b0
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2_gpio: i2c2gpiogrp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x4001b8b0
-				MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x4001b8b0
-			>;
-		};
-
-		pinctrl_mclk: mclkgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0
-			>;
-		};
-
-		pinctrl_ov5645: ov5645grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_3__CCM_CLKO2		0x000b0
-				MX6QDL_PAD_GPIO_6__GPIO1_IO06		0x1b0b0
-				MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0
-			>;
-		};
-
-		pinctrl_spdif: spdifgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_RXD0__SPDIF_OUT		0x1b0b0
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
-				MX6QDL_PAD_EIM_EB3__UART3_RTS_B		0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-			>;
-		};
-
-		pinctrl_usbotgvbus: usbotgvbusgrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x130b0
-			>;
-		};
-
-		pinctrl_usdhc1: usdhc1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__SD1_CMD		0x17059
-				MX6QDL_PAD_SD1_CLK__SD1_CLK		0x10059
-				MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x17059
-				MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x17059
-				MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x17059
-				MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			>;
-		};
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	phy-handle = <&ethphy>;
-	phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy: ethernet-phy@1 {
-			reg = <1>;
-		};
-	};
-};
-
-&mipi_csi {
-	status = "okay";
-
-	port@0 {
-		reg = <0>;
-
-		mipi_csi2_in: endpoint {
-			remote-endpoint = <&ov5645_to_mipi_csi2>;
-			clock-lanes = <0>;
-			data-lanes = <1 2>;
-		};
-	};
-};
-
-&spdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spdif>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qp-sabreauto.dts b/arch/arm/boot/dts/imx6qp-sabreauto.dts
deleted file mode 100644
index 2bb3bfb18ec3..000000000000
--- a/arch/arm/boot/dts/imx6qp-sabreauto.dts
+++ /dev/null
@@ -1,60 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-//
-// Copyright 2016 Freescale Semiconductor, Inc.
-
-/dts-v1/;
-
-#include "imx6qp.dtsi"
-#include "imx6qdl-sabreauto.dtsi"
-
-/ {
-	model = "Freescale i.MX6 Quad Plus SABRE Automotive Board";
-	compatible = "fsl,imx6qp-sabreauto", "fsl,imx6qp";
-};
-
-&i2c2 {
-	max7322: gpio@68 {
-		compatible = "maxim,max7322";
-		reg = <0x68>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-};
-
-&iomuxc {
-	imx6qdl-sabreauto {
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL1__ENET_MDIO          0x1b0b0
-				MX6QDL_PAD_KEY_COL2__ENET_MDC           0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x1b018
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x1b018
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x1b018
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x1b018
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x1b018
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x1b018
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b018
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b018
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b018
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b018
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b018
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b018
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK        0x4001b0a8
-				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
-			>;
-		};
-	};
-};
-
-&pcie {
-	reset-gpio = <&max7310_c 5 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&vgen3_reg {
-	regulator-always-on;
-};
diff --git a/arch/arm/boot/dts/imx6qp-sabresd.dts b/arch/arm/boot/dts/imx6qp-sabresd.dts
deleted file mode 100644
index 480e73183f6b..000000000000
--- a/arch/arm/boot/dts/imx6qp-sabresd.dts
+++ /dev/null
@@ -1,59 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-//
-// Copyright 2016 Freescale Semiconductor, Inc.
-
-/dts-v1/;
-
-#include "imx6qp.dtsi"
-#include "imx6qdl-sabresd.dtsi"
-
-/ {
-	model = "Freescale i.MX6 Quad Plus SABRE Smart Device Board";
-	compatible = "fsl,imx6qp-sabresd", "fsl,imx6qp";
-};
-
-&reg_arm {
-	vin-supply = <&sw2_reg>;
-};
-
-&iomuxc {
-	imx6qdl-sabresd {
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10071
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-				MX6QDL_PAD_NANDF_D4__SD2_DATA4		0x17059
-				MX6QDL_PAD_NANDF_D5__SD2_DATA5		0x17059
-				MX6QDL_PAD_NANDF_D6__SD2_DATA6		0x17059
-				MX6QDL_PAD_NANDF_D7__SD2_DATA7		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10071
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
-				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
-				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
-				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
-			>;
-		};
-	};
-};
-
-&pcie {
-	status = "disabled";
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qp-tx6qp-8037-mb7.dts b/arch/arm/boot/dts/imx6qp-tx6qp-8037-mb7.dts
deleted file mode 100644
index 92b38e6699aa..000000000000
--- a/arch/arm/boot/dts/imx6qp-tx6qp-8037-mb7.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6qp-tx6qp-8037.dts"
-#include "imx6qdl-tx6-mb7.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-8037 Module on MB7 baseboard";
-};
diff --git a/arch/arm/boot/dts/imx6qp-tx6qp-8037.dts b/arch/arm/boot/dts/imx6qp-tx6qp-8037.dts
deleted file mode 100644
index ffc0f2ee11d2..000000000000
--- a/arch/arm/boot/dts/imx6qp-tx6qp-8037.dts
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6qp.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lcd.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6QP-8037 Module";
-	compatible = "karo,imx6qp-tx6qp", "fsl,imx6qp";
-};
-
-&ds1339 {
-	status = "disabled";
-};
-
-&gpmi {
-	status = "disabled";
-};
-
-&ipu2 {
-	status = "disabled";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <4>;
-	non-removable;
-	no-1-8-v;
-	fsl,wp-controller;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_usdhc4: usdhc4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
-			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
-			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qp-tx6qp-8137-mb7.dts b/arch/arm/boot/dts/imx6qp-tx6qp-8137-mb7.dts
deleted file mode 100644
index 07ad70718aec..000000000000
--- a/arch/arm/boot/dts/imx6qp-tx6qp-8137-mb7.dts
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6qp-tx6qp-8137.dts"
-#include "imx6qdl-tx6-mb7.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-8137 Module on MB7 baseboard";
-	compatible = "karo,imx6qp-tx6qp", "fsl,imx6qp";
-};
-
-&ipu2 {
-	status = "disabled";
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qp-tx6qp-8137.dts b/arch/arm/boot/dts/imx6qp-tx6qp-8137.dts
deleted file mode 100644
index dd494d587014..000000000000
--- a/arch/arm/boot/dts/imx6qp-tx6qp-8137.dts
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6qp.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lvds.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6QP-8137 Module";
-	compatible = "karo,imx6qp-tx6qp", "fsl,imx6qp";
-};
-
-&ds1339 {
-	status = "disabled";
-};
-
-&gpmi {
-	status = "disabled";
-};
-
-&ipu2 {
-	status = "disabled";
-};
-
-&sata {
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <4>;
-	non-removable;
-	no-1-8-v;
-	fsl,wp-controller;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_usdhc4: usdhc4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
-			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
-			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
deleted file mode 100644
index 25f6f2fb1555..000000000000
--- a/arch/arm/boot/dts/imx6sl-evk.dts
+++ /dev/null
@@ -1,658 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-//Copyright (C) 2013 Freescale Semiconductor, Inc.
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "imx6sl.dtsi"
-
-/ {
-	model = "Freescale i.MX6 SoloLite EVK Board";
-	compatible = "fsl,imx6sl-evk", "fsl,imx6sl";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>;
-	};
-
-	backlight_display: backlight_display {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_led>;
-
-		user {
-			label = "debug";
-			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		vin-supply = <&swbst_reg>;
-	};
-
-	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg2_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		vin-supply = <&swbst_reg>;
-	};
-
-	reg_aud3v: regulator-aud3v {
-		compatible = "regulator-fixed";
-		regulator-name = "wm8962-supply-3v15";
-		regulator-min-microvolt = <3150000>;
-		regulator-max-microvolt = <3150000>;
-		regulator-boot-on;
-	};
-
-	reg_aud4v: regulator-aud4v {
-		compatible = "regulator-fixed";
-		regulator-name = "wm8962-supply-4v2";
-		regulator-min-microvolt = <4325000>;
-		regulator-max-microvolt = <4325000>;
-		regulator-boot-on;
-	};
-
-	reg_lcd_3v3: regulator-lcd-3v3 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
-		regulator-name = "lcd-3v3";
-		gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_lcd_5v: regulator-lcd-5v {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd-5v0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	sound {
-		compatible = "fsl,imx6sl-evk-wm8962", "fsl,imx-audio-wm8962";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hp>;
-		model = "wm8962-audio";
-		ssi-controller = <&ssi2>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"Headphone Jack", "HPOUTL",
-			"Headphone Jack", "HPOUTR",
-			"Ext Spk", "SPKOUTL",
-			"Ext Spk", "SPKOUTR",
-			"AMIC", "MICBIAS",
-			"IN3R", "AMIC";
-		mux-int-port = <2>;
-		mux-ext-port = <3>;
-		hp-det-gpio = <&gpio4 19 GPIO_ACTIVE_LOW>;
-	};
-
-	panel {
-		compatible = "sii,43wvf1g";
-		backlight = <&backlight_display>;
-		dvdd-supply = <&reg_lcd_3v3>;
-		avdd-supply = <&reg_lcd_5v>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&display_out>;
-			};
-		};
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux3>;
-	status = "okay";
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	flash: m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "st,m25p32", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&pinctrl_fec>;
-	pinctrl-1 = <&pinctrl_fec_sleep>;
-	phy-mode = "rmii";
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pmic: pfuze100@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-always-on;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	codec: wm8962@1a {
-		compatible = "wlf,wm8962";
-		reg = <0x1a>;
-		clocks = <&clks IMX6SL_CLK_EXTERN_AUDIO>;
-		DCVDD-supply = <&vgen3_reg>;
-		DBVDD-supply = <&reg_aud3v>;
-		AVDD-supply = <&vgen3_reg>;
-		CPVDD-supply = <&vgen3_reg>;
-		MICVDD-supply = <&reg_aud3v>;
-		PLLVDD-supply = <&vgen3_reg>;
-		SPKVDD1-supply = <&reg_aud4v>;
-		SPKVDD2-supply = <&reg_aud4v>;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6sl-evk {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6SL_PAD_KEY_ROW7__GPIO4_IO07    0x17059
-				MX6SL_PAD_KEY_COL7__GPIO4_IO06    0x17059
-				MX6SL_PAD_SD2_DAT7__GPIO5_IO00    0x17059
-				MX6SL_PAD_SD2_DAT6__GPIO4_IO29    0x17059
-				MX6SL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059
-				MX6SL_PAD_KEY_COL4__GPIO4_IO00	0x80000000
-				MX6SL_PAD_KEY_COL5__GPIO4_IO02	0x80000000
-				MX6SL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x4130b0
-			>;
-		};
-
-		pinctrl_audmux3: audmux3grp {
-			fsl,pins = <
-				MX6SL_PAD_AUD_RXD__AUD3_RXD	  0x4130b0
-				MX6SL_PAD_AUD_TXC__AUD3_TXC	  0x4130b0
-				MX6SL_PAD_AUD_TXD__AUD3_TXD	  0x4110b0
-				MX6SL_PAD_AUD_TXFS__AUD3_TXFS	  0x4130b0
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO	0x100b1
-				MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI	0x100b1
-				MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK	0x100b1
-				MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11	0x80000000
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX6SL_PAD_FEC_MDC__FEC_MDC		0x1b0b0
-				MX6SL_PAD_FEC_MDIO__FEC_MDIO		0x1b0b0
-				MX6SL_PAD_FEC_CRS_DV__FEC_RX_DV		0x1b0b0
-				MX6SL_PAD_FEC_RXD0__FEC_RX_DATA0	0x1b0b0
-				MX6SL_PAD_FEC_RXD1__FEC_RX_DATA1	0x1b0b0
-				MX6SL_PAD_FEC_TX_EN__FEC_TX_EN		0x1b0b0
-				MX6SL_PAD_FEC_TXD0__FEC_TX_DATA0	0x1b0b0
-				MX6SL_PAD_FEC_TXD1__FEC_TX_DATA1	0x1b0b0
-				MX6SL_PAD_FEC_REF_CLK__FEC_REF_OUT	0x4001b0a8
-			>;
-		};
-
-		pinctrl_fec_sleep: fecgrp-sleep {
-			fsl,pins = <
-				MX6SL_PAD_FEC_MDC__GPIO4_IO23      0x3080
-				MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25   0x3080
-				MX6SL_PAD_FEC_RXD0__GPIO4_IO17     0x3080
-				MX6SL_PAD_FEC_RXD1__GPIO4_IO18     0x3080
-				MX6SL_PAD_FEC_TX_EN__GPIO4_IO22    0x3080
-				MX6SL_PAD_FEC_TXD0__GPIO4_IO24     0x3080
-				MX6SL_PAD_FEC_TXD1__GPIO4_IO16     0x3080
-				MX6SL_PAD_FEC_REF_CLK__GPIO4_IO26  0x3080
-			>;
-		};
-
-		pinctrl_hp: hpgrp {
-			fsl,pins = <
-				MX6SL_PAD_FEC_RX_ER__GPIO4_IO19	  0x1b0b0
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6SL_PAD_I2C1_SCL__I2C1_SCL	0x4001b8b1
-				MX6SL_PAD_I2C1_SDA__I2C1_SDA	0x4001b8b1
-			>;
-		};
-
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6SL_PAD_I2C2_SCL__I2C2_SCL	0x4001b8b1
-				MX6SL_PAD_I2C2_SDA__I2C2_SDA	0x4001b8b1
-			>;
-		};
-
-		pinctrl_kpp: kppgrp {
-			fsl,pins = <
-				MX6SL_PAD_KEY_ROW0__KEY_ROW0    0x1b010
-				MX6SL_PAD_KEY_ROW1__KEY_ROW1    0x1b010
-				MX6SL_PAD_KEY_ROW2__KEY_ROW2    0x1b0b0
-				MX6SL_PAD_KEY_COL0__KEY_COL0    0x110b0
-				MX6SL_PAD_KEY_COL1__KEY_COL1    0x110b0
-				MX6SL_PAD_KEY_COL2__KEY_COL2    0x110b0
-			>;
-		};
-
-		pinctrl_lcd: lcdgrp {
-			fsl,pins = <
-				MX6SL_PAD_LCD_DAT0__LCD_DATA00 0x1b0b0
-				MX6SL_PAD_LCD_DAT1__LCD_DATA01 0x1b0b0
-				MX6SL_PAD_LCD_DAT2__LCD_DATA02 0x1b0b0
-				MX6SL_PAD_LCD_DAT3__LCD_DATA03 0x1b0b0
-				MX6SL_PAD_LCD_DAT4__LCD_DATA04 0x1b0b0
-				MX6SL_PAD_LCD_DAT5__LCD_DATA05 0x1b0b0
-				MX6SL_PAD_LCD_DAT6__LCD_DATA06 0x1b0b0
-				MX6SL_PAD_LCD_DAT7__LCD_DATA07 0x1b0b0
-				MX6SL_PAD_LCD_DAT8__LCD_DATA08 0x1b0b0
-				MX6SL_PAD_LCD_DAT9__LCD_DATA09 0x1b0b0
-				MX6SL_PAD_LCD_DAT10__LCD_DATA10 0x1b0b0
-				MX6SL_PAD_LCD_DAT11__LCD_DATA11 0x1b0b0
-				MX6SL_PAD_LCD_DAT12__LCD_DATA12 0x1b0b0
-				MX6SL_PAD_LCD_DAT13__LCD_DATA13 0x1b0b0
-				MX6SL_PAD_LCD_DAT14__LCD_DATA14 0x1b0b0
-				MX6SL_PAD_LCD_DAT15__LCD_DATA15 0x1b0b0
-				MX6SL_PAD_LCD_DAT16__LCD_DATA16 0x1b0b0
-				MX6SL_PAD_LCD_DAT17__LCD_DATA17 0x1b0b0
-				MX6SL_PAD_LCD_DAT18__LCD_DATA18 0x1b0b0
-				MX6SL_PAD_LCD_DAT19__LCD_DATA19 0x1b0b0
-				MX6SL_PAD_LCD_DAT20__LCD_DATA20 0x1b0b0
-				MX6SL_PAD_LCD_DAT21__LCD_DATA21 0x1b0b0
-				MX6SL_PAD_LCD_DAT22__LCD_DATA22 0x1b0b0
-				MX6SL_PAD_LCD_DAT23__LCD_DATA23 0x1b0b0
-				MX6SL_PAD_LCD_CLK__LCD_CLK 0x1b0b0
-				MX6SL_PAD_LCD_ENABLE__LCD_ENABLE 0x1b0b0
-				MX6SL_PAD_LCD_HSYNC__LCD_HSYNC 0x1b0b0
-				MX6SL_PAD_LCD_VSYNC__LCD_VSYNC 0x1b0b0
-			>;
-		};
-
-		pinctrl_led: ledgrp {
-			fsl,pins = <
-				MX6SL_PAD_HSIC_STROBE__GPIO3_IO20 0x17059
-			>;
-		};
-
-		pinctrl_pwm1: pwmgrp {
-			fsl,pins = <
-				MX6SL_PAD_PWM1__PWM1_OUT 0x110b0
-			>;
-		};
-
-		pinctrl_reg_lcd_3v3: reglcd3v3grp {
-			fsl,pins = <
-				MX6SL_PAD_KEY_ROW5__GPIO4_IO03    0x17059
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6SL_PAD_UART1_RXD__UART1_RX_DATA	0x1b0b1
-				MX6SL_PAD_UART1_TXD__UART1_TX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg1: usbotg1grp {
-			fsl,pins = <
-				MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID	0x17059
-			>;
-		};
-
-		pinctrl_usdhc1: usdhc1grp {
-			fsl,pins = <
-				MX6SL_PAD_SD1_CMD__SD1_CMD		0x17059
-				MX6SL_PAD_SD1_CLK__SD1_CLK		0x10059
-				MX6SL_PAD_SD1_DAT0__SD1_DATA0		0x17059
-				MX6SL_PAD_SD1_DAT1__SD1_DATA1		0x17059
-				MX6SL_PAD_SD1_DAT2__SD1_DATA2		0x17059
-				MX6SL_PAD_SD1_DAT3__SD1_DATA3		0x17059
-				MX6SL_PAD_SD1_DAT4__SD1_DATA4		0x17059
-				MX6SL_PAD_SD1_DAT5__SD1_DATA5		0x17059
-				MX6SL_PAD_SD1_DAT6__SD1_DATA6		0x17059
-				MX6SL_PAD_SD1_DAT7__SD1_DATA7		0x17059
-			>;
-		};
-
-		pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
-			fsl,pins = <
-				MX6SL_PAD_SD1_CMD__SD1_CMD		0x170b9
-				MX6SL_PAD_SD1_CLK__SD1_CLK		0x100b9
-				MX6SL_PAD_SD1_DAT0__SD1_DATA0		0x170b9
-				MX6SL_PAD_SD1_DAT1__SD1_DATA1		0x170b9
-				MX6SL_PAD_SD1_DAT2__SD1_DATA2		0x170b9
-				MX6SL_PAD_SD1_DAT3__SD1_DATA3		0x170b9
-				MX6SL_PAD_SD1_DAT4__SD1_DATA4		0x170b9
-				MX6SL_PAD_SD1_DAT5__SD1_DATA5		0x170b9
-				MX6SL_PAD_SD1_DAT6__SD1_DATA6		0x170b9
-				MX6SL_PAD_SD1_DAT7__SD1_DATA7		0x170b9
-			>;
-		};
-
-		pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
-			fsl,pins = <
-				MX6SL_PAD_SD1_CMD__SD1_CMD		0x170f9
-				MX6SL_PAD_SD1_CLK__SD1_CLK		0x100f9
-				MX6SL_PAD_SD1_DAT0__SD1_DATA0		0x170f9
-				MX6SL_PAD_SD1_DAT1__SD1_DATA1		0x170f9
-				MX6SL_PAD_SD1_DAT2__SD1_DATA2		0x170f9
-				MX6SL_PAD_SD1_DAT3__SD1_DATA3		0x170f9
-				MX6SL_PAD_SD1_DAT4__SD1_DATA4		0x170f9
-				MX6SL_PAD_SD1_DAT5__SD1_DATA5		0x170f9
-				MX6SL_PAD_SD1_DAT6__SD1_DATA6		0x170f9
-				MX6SL_PAD_SD1_DAT7__SD1_DATA7		0x170f9
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6SL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6SL_PAD_SD2_CLK__SD2_CLK		0x10059
-				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
-			fsl,pins = <
-				MX6SL_PAD_SD2_CMD__SD2_CMD		0x170b9
-				MX6SL_PAD_SD2_CLK__SD2_CLK		0x100b9
-				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
-				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
-				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
-				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
-			>;
-		};
-
-		pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
-			fsl,pins = <
-				MX6SL_PAD_SD2_CMD__SD2_CMD		0x170f9
-				MX6SL_PAD_SD2_CLK__SD2_CLK		0x100f9
-				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
-				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
-				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
-				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6SL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6SL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
-			fsl,pins = <
-				MX6SL_PAD_SD3_CMD__SD3_CMD		0x170b9
-				MX6SL_PAD_SD3_CLK__SD3_CLK		0x100b9
-				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
-				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
-				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
-				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
-			>;
-		};
-
-		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
-			fsl,pins = <
-				MX6SL_PAD_SD3_CMD__SD3_CMD		0x170f9
-				MX6SL_PAD_SD3_CLK__SD3_CLK		0x100f9
-				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
-				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
-				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
-				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
-			>;
-		};
-	};
-};
-
-&kpp {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_kpp>;
-	linux,keymap = <
-			MATRIX_KEY(0x0, 0x0, KEY_UP)         /* ROW0, COL0 */
-			MATRIX_KEY(0x0, 0x1, KEY_DOWN)       /* ROW0, COL1 */
-			MATRIX_KEY(0x0, 0x2, KEY_ENTER)      /* ROW0, COL2 */
-			MATRIX_KEY(0x1, 0x0, KEY_HOME)       /* ROW1, COL0 */
-			MATRIX_KEY(0x1, 0x1, KEY_RIGHT)      /* ROW1, COL1 */
-			MATRIX_KEY(0x1, 0x2, KEY_LEFT)       /* ROW1, COL2 */
-			MATRIX_KEY(0x2, 0x0, KEY_VOLUMEDOWN) /* ROW2, COL0 */
-			MATRIX_KEY(0x2, 0x1, KEY_VOLUMEUP)   /* ROW2, COL1 */
-	>;
-	status = "okay";
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lcd>;
-	status = "okay";
-
-	port {
-		display_out: endpoint {
-			remote-endpoint = <&panel_in>;
-		};
-	};
-};
-
-&pwm1 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&reg_vdd1p1 {
-	vin-supply = <&sw2_reg>;
-};
-
-&reg_vdd2p5 {
-	vin-supply = <&sw2_reg>;
-};
-
-&snvs_poweroff {
-	status = "okay";
-};
-
-&ssi2 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usbotg1 {
-	vbus-supply = <&reg_usb_otg1_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg1>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usbotg2 {
-	vbus-supply = <&reg_usb_otg2_vbus>;
-	dr_mode = "host";
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
-	bus-width = <8>;
-	cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
-	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6sl-warp.dts b/arch/arm/boot/dts/imx6sl-warp.dts
deleted file mode 100644
index 9d7c8884892a..000000000000
--- a/arch/arm/boot/dts/imx6sl-warp.dts
+++ /dev/null
@@ -1,234 +0,0 @@
-/*
- * Copyright 2014, 2015 O.S. Systems Software LTDA.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include "imx6sl.dtsi"
-
-/ {
-	model = "Revotics WaRP Board";
-	compatible = "revotics,imx6sl-warp", "fsl,imx6sl";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>;
-	};
-
-	usdhc3_pwrseq: usdhc3_pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>, 	/* WL_REG_ON */
-			      <&gpio4 7 GPIO_ACTIVE_LOW>, 	/* WL_HOSTWAKE */
-			      <&gpio3 25 GPIO_ACTIVE_LOW>, 	/* BT_REG_ON */
-			      <&gpio3 27 GPIO_ACTIVE_LOW>,	/* BT_HOSTWAKE */
-			      <&gpio4 4 GPIO_ACTIVE_LOW>, 	/* BT_WAKE */
-			      <&gpio4 6 GPIO_ACTIVE_LOW>; 	/* BT_RST_N */
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbotg1 {
-	dr_mode = "peripheral";
-	disable-over-current;
-	status = "okay";
-};
-
-&usbotg2 {
-	dr_mode = "host";
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	bus-width = <4>;
-	non-removable;
-	keep-power-in-suspend;
-	wakeup-source;
-	mmc-pwrseq = <&usdhc3_pwrseq>;
-	status = "okay";
-};
-
-&iomuxc {
-	imx6sl-warp {
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6SL_PAD_UART1_RXD__UART1_RX_DATA	0x41b0b1
-				MX6SL_PAD_UART1_TXD__UART1_TX_DATA	0x41b0b1
-			>;
-		};
-
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX6SL_PAD_AUD_RXC__UART3_RX_DATA	0x41b0b1
-				MX6SL_PAD_AUD_RXC__UART3_TX_DATA	0x41b0b1
-			>;
-		};
-
-		pinctrl_uart5: uart5grp {
-			fsl,pins = <
-				MX6SL_PAD_ECSPI1_SCLK__UART5_RX_DATA	0x41b0b1
-				MX6SL_PAD_ECSPI1_MOSI__UART5_TX_DATA	0x41b0b1
-				MX6SL_PAD_ECSPI1_MISO__UART5_RTS_B	0x4130b1
-				MX6SL_PAD_ECSPI1_SS0__UART5_CTS_B	0x4130b1
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6SL_PAD_SD2_CMD__SD2_CMD		0x417059
-				MX6SL_PAD_SD2_CLK__SD2_CLK		0x410059
-				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x417059
-				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x417059
-				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x417059
-				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x417059
-				MX6SL_PAD_SD2_DAT4__SD2_DATA4		0x417059
-				MX6SL_PAD_SD2_DAT5__SD2_DATA5		0x417059
-				MX6SL_PAD_SD2_DAT6__SD2_DATA6		0x417059
-				MX6SL_PAD_SD2_DAT7__SD2_DATA7		0x417059
-				MX6SL_PAD_SD2_RST__SD2_RESET		0x417059
-			>;
-		};
-
-		pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
-			fsl,pins = <
-				MX6SL_PAD_SD2_CMD__SD2_CMD		0x4170b9
-				MX6SL_PAD_SD2_CLK__SD2_CLK		0x4100b9
-				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x4170b9
-				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x4170b9
-				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x4170b9
-				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x4170b9
-				MX6SL_PAD_SD2_DAT4__SD2_DATA4		0x4170b9
-				MX6SL_PAD_SD2_DAT5__SD2_DATA5		0x4170b9
-				MX6SL_PAD_SD2_DAT6__SD2_DATA6		0x4170b9
-				MX6SL_PAD_SD2_DAT7__SD2_DATA7		0x4170b9
-				MX6SL_PAD_SD2_RST__SD2_RESET		0x4170b9
-			>;
-		};
-
-		pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
-			fsl,pins = <
-				MX6SL_PAD_SD2_CMD__SD2_CMD		0x4170f9
-				MX6SL_PAD_SD2_CLK__SD2_CLK		0x4100f9
-				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x4170f9
-				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x4170f9
-				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x4170f9
-				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x4170f9
-				MX6SL_PAD_SD2_DAT4__SD2_DATA4		0x4170f9
-				MX6SL_PAD_SD2_DAT5__SD2_DATA5		0x4170f9
-				MX6SL_PAD_SD2_DAT6__SD2_DATA6		0x4170f9
-				MX6SL_PAD_SD2_DAT7__SD2_DATA7		0x4170f9
-				MX6SL_PAD_SD2_RST__SD2_RESET		0x4170f9
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6SL_PAD_SD3_CMD__SD3_CMD		0x417059
-				MX6SL_PAD_SD3_CLK__SD3_CLK		0x410059
-				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x417059
-				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x417059
-				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x417059
-				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x417059
-			>;
-		};
-
-		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
-			fsl,pins = <
-				MX6SL_PAD_SD3_CMD__SD3_CMD		0x4170b9
-				MX6SL_PAD_SD3_CLK__SD3_CLK		0x4100b9
-				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x4170b9
-				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x4170b9
-				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x4170b9
-				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x4170b9
-			>;
-		};
-
-		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
-			fsl,pins = <
-				MX6SL_PAD_SD3_CMD__SD3_CMD		0x4170f9
-				MX6SL_PAD_SD3_CLK__SD3_CLK		0x4100f9
-				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x4170f9
-				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x4170f9
-				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x4170f9
-				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x4170f9
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi
deleted file mode 100644
index c6e85e4a0883..000000000000
--- a/arch/arm/boot/dts/imx6sx-sdb.dtsi
+++ /dev/null
@@ -1,718 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (C) 2014 Freescale Semiconductor, Inc.
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "imx6sx.dtsi"
-
-/ {
-	model = "Freescale i.MX6 SoloX SDB Board";
-	compatible = "fsl,imx6sx-sdb", "fsl,imx6sx";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>;
-	};
-
-	backlight_display: backlight-display {
-		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-			wakeup-source;
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-			wakeup-source;
-		};
-	};
-
-	vcc_sd3: regulator-vcc-sd3 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_vcc_sd3>;
-		regulator-name = "VCC_SD3";
-		regulator-min-microvolt = <3000000>;
-		regulator-max-microvolt = <3000000>;
-		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb_otg1>;
-		regulator-name = "usb_otg1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb_otg2>;
-		regulator-name = "usb_otg2_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_psu_5v: regulator-psu-5v {
-		compatible = "regulator-fixed";
-		regulator-name = "PSU-5V0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_lcd_3v3: regulator-lcd-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd-3v3";
-		gpio = <&gpio3 27 0>;
-		enable-active-high;
-	};
-
-	reg_peri_3v3: regulator-peri-3v3 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_peri_3v3>;
-		regulator-name = "peri_3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio4 16 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-	};
-
-	reg_enet_3v3: regulator-enet-3v3 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_enet_3v3>;
-		regulator-name = "enet_3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 6 GPIO_ACTIVE_LOW>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	reg_pcie_gpio: regulator-pcie-gpio {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pcie_reg>;
-		regulator-name = "MPCIE_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 1 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_lcd_5v: regulator-lcd-5v {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd-5v0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_can_en: regulator-can-en {
-		compatible = "regulator-fixed";
-		regulator-name = "can-en";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_can_stby: regulator-can-stby {
-		compatible = "regulator-fixed";
-		regulator-name = "can-stby";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	sound {
-		compatible = "fsl,imx6sx-sdb-wm8962", "fsl,imx-audio-wm8962";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hp>;
-		model = "wm8962-audio";
-		ssi-controller = <&ssi2>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"Headphone Jack", "HPOUTL",
-			"Headphone Jack", "HPOUTR",
-			"Ext Spk", "SPKOUTL",
-			"Ext Spk", "SPKOUTR",
-			"AMIC", "MICBIAS",
-			"IN3R", "AMIC";
-		mux-int-port = <2>;
-		mux-ext-port = <6>;
-		hp-det-gpio = <&gpio1 17 GPIO_ACTIVE_LOW>;
-	};
-
-	panel {
-		compatible = "sii,43wvf1g";
-		backlight = <&backlight_display>;
-		dvdd-supply = <&reg_lcd_3v3>;
-		avdd-supply = <&reg_lcd_5v>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&display_out>;
-			};
-		};
-	};
-
-	sound-spdif {
-		compatible = "fsl,imx-audio-spdif",
-			   "fsl,imx6sx-sdb-spdif";
-		model = "imx-spdif";
-		spdif-controller = <&spdif>;
-		spdif-out;
-	};
-
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1>;
-	phy-supply = <&reg_enet_3v3>;
-	phy-mode = "rgmii-id";
-	phy-handle = <&ethphy1>;
-	phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
-	fsl,magic-packet;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy1: ethernet-phy@1 {
-			reg = <1>;
-		};
-
-		ethphy2: ethernet-phy@2 {
-			reg = <2>;
-		};
-	};
-};
-
-&fec2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet2>;
-	phy-mode = "rgmii-id";
-	phy-handle = <&ethphy2>;
-	fsl,magic-packet;
-	status = "okay";
-};
-
-&flexcan1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	xceiver-supply = <&reg_can_stby>;
-	status = "okay";
-};
-
-&flexcan2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	xceiver-supply = <&reg_can_stby>;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&i2c4 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c4>;
-	status = "okay";
-
-	codec: wm8962@1a {
-		compatible = "wlf,wm8962";
-		reg = <0x1a>;
-		clocks = <&clks IMX6SX_CLK_AUDIO>;
-		DCVDD-supply = <&vgen4_reg>;
-		DBVDD-supply = <&vgen4_reg>;
-		AVDD-supply = <&vgen4_reg>;
-		CPVDD-supply = <&vgen4_reg>;
-		MICVDD-supply = <&vgen3_reg>;
-		PLLVDD-supply = <&vgen4_reg>;
-		SPKVDD1-supply = <&reg_psu_5v>;
-		SPKVDD2-supply = <&reg_psu_5v>;
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio2 0 GPIO_ACTIVE_LOW>;
-	vpcie-supply = <&reg_pcie_gpio>;
-	status = "okay";
-};
-
-&lcdif1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lcd>;
-	status = "okay";
-
-	port {
-		display_out: endpoint {
-			remote-endpoint = <&panel_in>;
-		};
-	};
-};
-
-&pwm3 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&snvs_poweroff {
-	status = "okay";
-};
-
-&sai1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sai1>;
-	status = "disabled";
-};
-
-&spdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spdif>;
-	assigned-clocks = <&clks IMX6SX_CLK_SPDIF_PODF>;
-	assigned-clock-rates = <24576000>;
-	status = "okay";
-};
-
-&ssi2 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart5 { /* for bluetooth */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbotg1 {
-	vbus-supply = <&reg_usb_otg1_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb_otg1_id>;
-	status = "okay";
-};
-
-&usbotg2 {
-	vbus-supply = <&reg_usb_otg2_vbus>;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbphy1 {
-	fsl,tx-d-cal = <106>;
-};
-
-&usbphy2 {
-	fsl,tx-d-cal = <106>;
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	non-removable;
-	no-1-8-v;
-	keep-power-in-suspend;
-	wakeup-source;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	bus-width = <8>;
-	cd-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
-	keep-power-in-suspend;
-	wakeup-source;
-	vmmc-supply = <&vcc_sd3>;
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	cd-gpios = <&gpio6 21 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-};
-
-&iomuxc {
-	imx6x-sdb {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6SX_PAD_CSI_DATA00__AUDMUX_AUD6_TXC	0x130b0
-				MX6SX_PAD_CSI_DATA01__AUDMUX_AUD6_TXFS	0x130b0
-				MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD	0x120b0
-				MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD	0x130b0
-				MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK	0x130b0
-			>;
-		};
-
-		pinctrl_enet1: enet1grp {
-			fsl,pins = <
-				MX6SX_PAD_ENET1_MDIO__ENET1_MDIO	0xa0b1
-				MX6SX_PAD_ENET1_MDC__ENET1_MDC		0xa0b1
-				MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC	0xa0b1
-				MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0	0xa0b1
-				MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1	0xa0b1
-				MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2	0xa0b1
-				MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3	0xa0b1
-				MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN	0xa0b1
-				MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK	0x3081
-				MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0	0x3081
-				MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1	0x3081
-				MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2	0x3081
-				MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3	0x3081
-				MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN	0x3081
-				MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M	0x91
-				/* phy reset */
-				MX6SX_PAD_ENET2_CRS__GPIO2_IO_7		0x10b0
-			>;
-		};
-
-		pinctrl_enet_3v3: enet3v3grp {
-			fsl,pins = <
-				MX6SX_PAD_ENET2_COL__GPIO2_IO_6		0x80000000
-			>;
-		};
-
-		pinctrl_enet2: enet2grp {
-			fsl,pins = <
-				MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC	0xa0b9
-				MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0	0xa0b1
-				MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1	0xa0b1
-				MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2	0xa0b1
-				MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3	0xa0b1
-				MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN	0xa0b1
-				MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK	0x3081
-				MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0	0x3081
-				MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1	0x3081
-				MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2	0x3081
-				MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3	0x3081
-				MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN	0x3081
-			>;
-		};
-
-		pinctrl_flexcan1: flexcan1grp {
-			fsl,pins = <
-				MX6SX_PAD_QSPI1B_DQS__CAN1_TX		0x1b020
-				MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX		0x1b020
-			>;
-		};
-
-		pinctrl_flexcan2: flexcan2grp {
-			fsl,pins = <
-				MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX		0x1b020
-				MX6SX_PAD_QSPI1A_DQS__CAN2_TX		0x1b020
-			>;
-		};
-
-		pinctrl_gpio_keys: gpio_keysgrp {
-			fsl,pins = <
-				MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x17059
-				MX6SX_PAD_CSI_DATA05__GPIO1_IO_19 0x17059
-			>;
-		};
-
-		pinctrl_hp: hpgrp {
-			fsl,pins = <
-				MX6SX_PAD_CSI_DATA03__GPIO1_IO_17 0x17059
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6SX_PAD_GPIO1_IO01__I2C1_SDA		0x4001b8b1
-				MX6SX_PAD_GPIO1_IO00__I2C1_SCL		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6SX_PAD_KEY_ROW4__I2C3_SDA		0x4001b8b1
-				MX6SX_PAD_KEY_COL4__I2C3_SCL		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c4: i2c4grp {
-			fsl,pins = <
-				MX6SX_PAD_CSI_DATA07__I2C4_SDA		0x4001b8b1
-				MX6SX_PAD_CSI_DATA06__I2C4_SCL		0x4001b8b1
-			>;
-		};
-
-		pinctrl_lcd: lcdgrp {
-			fsl,pins = <
-				MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0
-				MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0
-				MX6SX_PAD_LCD1_CLK__LCDIF1_CLK	0x4001b0b0
-				MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0
-				MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0
-				MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0
-				MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0
-			>;
-		};
-
-		pinctrl_mqs: mqsgrp {
-			fsl,pins = <
-				MX6SX_PAD_SD2_CLK__MQS_RIGHT 0x120b0
-				MX6SX_PAD_SD2_CMD__MQS_LEFT  0x120b0
-			>;
-		};
-
-		pinctrl_pcie: pciegrp {
-			fsl,pins = <
-				MX6SX_PAD_ENET1_COL__GPIO2_IO_0 0x10b0
-			>;
-		};
-
-		pinctrl_pcie_reg: pciereggrp {
-			fsl,pins = <
-				MX6SX_PAD_ENET1_CRS__GPIO2_IO_1	0x10b0
-			>;
-		};
-
-		pinctrl_peri_3v3: peri3v3grp {
-			fsl,pins = <
-				MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16	0x80000000
-			>;
-		};
-
-		pinctrl_pwm3: pwm3grp-1 {
-			fsl,pins = <
-				MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x110b0
-			>;
-		};
-
-		pinctrl_qspi2: qspi2grp {
-			fsl,pins = <
-				MX6SX_PAD_NAND_WP_B__QSPI2_A_DATA_0     0x70f1
-				MX6SX_PAD_NAND_READY_B__QSPI2_A_DATA_1  0x70f1
-				MX6SX_PAD_NAND_CE0_B__QSPI2_A_DATA_2    0x70f1
-				MX6SX_PAD_NAND_CE1_B__QSPI2_A_DATA_3    0x70f1
-				MX6SX_PAD_NAND_CLE__QSPI2_A_SCLK        0x70f1
-				MX6SX_PAD_NAND_ALE__QSPI2_A_SS0_B       0x70f1
-				MX6SX_PAD_NAND_DATA01__QSPI2_B_DATA_0   0x70f1
-				MX6SX_PAD_NAND_DATA00__QSPI2_B_DATA_1   0x70f1
-				MX6SX_PAD_NAND_WE_B__QSPI2_B_DATA_2     0x70f1
-				MX6SX_PAD_NAND_RE_B__QSPI2_B_DATA_3     0x70f1
-				MX6SX_PAD_NAND_DATA02__QSPI2_B_SCLK     0x70f1
-				MX6SX_PAD_NAND_DATA03__QSPI2_B_SS0_B    0x70f1
-			>;
-		};
-
-		pinctrl_vcc_sd3: vccsd3grp {
-			fsl,pins = <
-				MX6SX_PAD_KEY_COL1__GPIO2_IO_11		0x17059
-			>;
-		};
-
-		pinctrl_sai1: sai1grp {
-			fsl,pins = <
-				MX6SX_PAD_CSI_DATA00__SAI1_TX_BCLK	0x130b0
-				MX6SX_PAD_CSI_DATA01__SAI1_TX_SYNC	0x130b0
-				MX6SX_PAD_CSI_HSYNC__SAI1_TX_DATA_0	0x120b0
-				MX6SX_PAD_CSI_VSYNC__SAI1_RX_DATA_0	0x130b0
-				MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK	0x130b0
-			>;
-		};
-
-		pinctrl_spdif: spdifgrp {
-			fsl,pins = <
-				MX6SX_PAD_SD4_DATA4__SPDIF_OUT          0x1b0b0
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX	0x1b0b1
-				MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart5: uart5grp {
-			fsl,pins = <
-				MX6SX_PAD_KEY_ROW3__UART5_DCE_RX	0x1b0b1
-				MX6SX_PAD_KEY_COL3__UART5_DCE_TX	0x1b0b1
-				MX6SX_PAD_KEY_ROW2__UART5_DCE_CTS	0x1b0b1
-				MX6SX_PAD_KEY_COL2__UART5_DCE_RTS	0x1b0b1
-			>;
-		};
-
-		pinctrl_usb_otg1: usbotg1grp {
-			fsl,pins = <
-				MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9	0x10b0
-			>;
-		};
-
-		pinctrl_usb_otg1_id: usbotg1idgrp {
-			fsl,pins = <
-				MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID	0x17059
-			>;
-		};
-
-		pinctrl_usb_otg2: usbot2ggrp {
-			fsl,pins = <
-				MX6SX_PAD_GPIO1_IO12__GPIO1_IO_12	0x10b0
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6SX_PAD_SD2_CMD__USDHC2_CMD		0x17059
-				MX6SX_PAD_SD2_CLK__USDHC2_CLK		0x10059
-				MX6SX_PAD_SD2_DATA0__USDHC2_DATA0	0x17059
-				MX6SX_PAD_SD2_DATA1__USDHC2_DATA1	0x17059
-				MX6SX_PAD_SD2_DATA2__USDHC2_DATA2	0x17059
-				MX6SX_PAD_SD2_DATA3__USDHC2_DATA3	0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x17059
-				MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x10059
-				MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x17059
-				MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x17059
-				MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x17059
-				MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x17059
-				MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x17059
-				MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x17059
-				MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x17059
-				MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x17059
-				MX6SX_PAD_KEY_COL0__GPIO2_IO_10		0x17059 /* CD */
-				MX6SX_PAD_KEY_ROW0__GPIO2_IO_15		0x17059 /* WP */
-			>;
-		};
-
-		pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
-			fsl,pins = <
-				MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x170b9
-				MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x100b9
-				MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x170b9
-				MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x170b9
-				MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x170b9
-				MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x170b9
-				MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x170b9
-				MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x170b9
-				MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x170b9
-				MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x170b9
-			>;
-		};
-
-		pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
-			fsl,pins = <
-				MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x170f9
-				MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x100f9
-				MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x170f9
-				MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x170f9
-				MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x170f9
-				MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x170f9
-				MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x170f9
-				MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x170f9
-				MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x170f9
-				MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x170f9
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x17059
-				MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x10059
-				MX6SX_PAD_SD4_DATA0__USDHC4_DATA0	0x17059
-				MX6SX_PAD_SD4_DATA1__USDHC4_DATA1	0x17059
-				MX6SX_PAD_SD4_DATA2__USDHC4_DATA2	0x17059
-				MX6SX_PAD_SD4_DATA3__USDHC4_DATA3	0x17059
-				MX6SX_PAD_SD4_DATA7__GPIO6_IO_21	0x17059 /* CD */
-				MX6SX_PAD_SD4_DATA6__GPIO6_IO_20	0x17059 /* WP */
-			>;
-		};
-
-		pinctrl_wdog: wdoggrp {
-			fsl,pins = <
-				MX6SX_PAD_GPIO1_IO13__WDOG1_WDOG_ANY 0x30b0
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts b/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts
deleted file mode 100644
index 5bfad4655b22..000000000000
--- a/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts
+++ /dev/null
@@ -1,103 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2017 exceet electronics GmbH
- * Copyright (C) 2018 Kontron Electronics GmbH
- * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
- */
-
-#include "imx6ul-kontron-n6310-s.dts"
-
-/ {
-	model = "Kontron N6310 S 43";
-	compatible = "kontron,imx6ul-n6310-s-43", "kontron,imx6ul-n6310-s",
-		     "kontron,imx6ul-n6310-som", "fsl,imx6ul";
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm7 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-		status = "okay";
-	};
-};
-
-&i2c4 {
-	touchscreen@5d {
-		compatible = "goodix,gt928";
-		reg = <0x5d>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_cap_touch>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
-		reset-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
-		irq-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>;
-	/* Leave status disabled because of missing display panel node */
-};
-
-&pwm7 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm7>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_cap_touch: captouchgrp {
-		fsl,pins = <
-			MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x1b0b0 /* Touch Interrupt */
-			MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x1b0b0 /* Touch Reset */
-			MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x1b0b0 /* Touch Wake */
-		>;
-	};
-
-	pinctrl_lcdif_ctrl: lcdifctrlgrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x79
-			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x79
-			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x79
-			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x79
-			MX6UL_PAD_LCD_RESET__LCDIF_RESET	0x79
-		>;
-	};
-
-	pinctrl_lcdif_dat: lcdifdatgrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00	0x79
-			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01	0x79
-			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x79
-			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x79
-			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x79
-			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x79
-			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x79
-			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x79
-			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08	0x79
-			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09	0x79
-			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x79
-			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x79
-			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x79
-			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x79
-			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x79
-			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x79
-			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16	0x79
-			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17	0x79
-			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18	0x79
-			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19	0x79
-			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20	0x79
-			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21	0x79
-			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22	0x79
-			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23	0x79
-		>;
-	};
-
-	pinctrl_pwm7: pwm7grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_VSYNC__PWM7_OUT		0x110b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts b/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts
deleted file mode 100644
index 5a3e06d6219b..000000000000
--- a/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2017 exceet electronics GmbH
- * Copyright (C) 2018 Kontron Electronics GmbH
- * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
- */
-
-/dts-v1/;
-
-#include "imx6ul-kontron-n6310-som.dtsi"
-#include "imx6ul-kontron-n6x1x-s.dtsi"
-
-/ {
-	model = "Kontron N6310 S";
-	compatible = "kontron,imx6ul-n6310-s", "kontron,imx6ul-n6310-som",
-		     "fsl,imx6ul";
-};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi
deleted file mode 100644
index 47d3ce5d255f..000000000000
--- a/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi
+++ /dev/null
@@ -1,41 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2017 exceet electronics GmbH
- * Copyright (C) 2018 Kontron Electronics GmbH
- * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
- */
-
-#include "imx6ul.dtsi"
-#include "imx6ul-kontron-n6x1x-som-common.dtsi"
-
-/ {
-	model = "Kontron N6310 SOM";
-	compatible = "kontron,imx6ul-n6310-som", "fsl,imx6ul";
-
-	memory@80000000 {
-		reg = <0x80000000 0x10000000>;
-		device_type = "memory";
-	};
-};
-
-&qspi {
-	spi-flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "spi-nand";
-		spi-max-frequency = <108000000>;
-		spi-tx-bus-width = <4>;
-		spi-rx-bus-width = <4>;
-		reg = <0>;
-
-		partition@0 {
-			label = "ubi1";
-			reg = <0x00000000 0x08000000>;
-		};
-
-		partition@8000000 {
-			label = "ubi2";
-			reg = <0x08000000 0x08000000>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6311-s.dts b/arch/arm/boot/dts/imx6ul-kontron-n6311-s.dts
deleted file mode 100644
index 239a1af3aeaa..000000000000
--- a/arch/arm/boot/dts/imx6ul-kontron-n6311-s.dts
+++ /dev/null
@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2017 exceet electronics GmbH
- * Copyright (C) 2018 Kontron Electronics GmbH
- */
-
-/dts-v1/;
-
-#include "imx6ul-kontron-n6311-som.dtsi"
-#include "imx6ul-kontron-n6x1x-s.dtsi"
-
-/ {
-	model = "Kontron N6311 S";
-	compatible = "kontron,imx6ul-n6311-s", "kontron,imx6ul-n6311-som",
-		     "fsl,imx6ul";
-};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi
deleted file mode 100644
index a095a7654ac6..000000000000
--- a/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi
+++ /dev/null
@@ -1,40 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2017 exceet electronics GmbH
- * Copyright (C) 2018 Kontron Electronics GmbH
- */
-
-#include "imx6ul.dtsi"
-#include "imx6ul-kontron-n6x1x-som-common.dtsi"
-
-/ {
-	model = "Kontron N6311 SOM";
-	compatible = "kontron,imx6ul-n6311-som", "fsl,imx6ul";
-
-	memory@80000000 {
-		reg = <0x80000000 0x20000000>;
-		device_type = "memory";
-	};
-};
-
-&qspi {
-	spi-flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "spi-nand";
-		spi-max-frequency = <104000000>;
-		spi-tx-bus-width = <4>;
-		spi-rx-bus-width = <4>;
-		reg = <0>;
-
-		partition@0 {
-			label = "ubi1";
-			reg = <0x00000000 0x08000000>;
-		};
-
-		partition@8000000 {
-			label = "ubi2";
-			reg = <0x08000000 0x18000000>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi
deleted file mode 100644
index 770f59b23102..000000000000
--- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi
+++ /dev/null
@@ -1,406 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2017 exceet electronics GmbH
- * Copyright (C) 2018 Kontron Electronics GmbH
- * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led1 {
-			label = "debug-led1";
-			gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led2 {
-			label = "debug-led2";
-			gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led3 {
-			label = "debug-led3";
-			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-	};
-
-	pwm-beeper {
-		compatible = "pwm-beeper";
-		pwms = <&pwm8 0 5000>;
-	};
-
-	reg_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_5v: regulator-5v {
-		compatible = "regulator-fixed";
-		regulator-name = "5v";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_vref_adc: regulator-vref-adc {
-		compatible = "regulator-fixed";
-		regulator-name = "vref-adc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-&adc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc1>;
-	num-channels = <3>;
-	vref-supply = <&reg_vref_adc>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	status = "okay";
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	eeprom@0 {
-		compatible = "anvo,anv32e61w", "atmel,at25";
-		reg = <0>;
-		spi-max-frequency = <20000000>;
-		spi-cpha;
-		spi-cpol;
-		pagesize = <1>;
-		size = <8192>;
-		address-width = <16>;
-	};
-};
-
-&fec1 {
-	pinctrl-0 = <&pinctrl_enet1>;
-	/delete-node/ mdio;
-};
-
-&fec2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy2>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy1: ethernet-phy@1 {
-			reg = <1>;
-			micrel,led-mode = <0>;
-			clocks = <&clks IMX6UL_CLK_ENET_REF>;
-			clock-names = "rmii-ref";
-		};
-
-		ethphy2: ethernet-phy@2 {
-			reg = <2>;
-			micrel,led-mode = <0>;
-			clocks = <&clks IMX6UL_CLK_ENET2_REF>;
-			clock-names = "rmii-ref";
-		};
-	};
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-};
-
-&i2c4 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c4>;
-	status = "okay";
-
-	rtc@32 {
-		compatible = "epson,rx8900";
-		reg = <0x32>;
-	};
-};
-
-&pwm8 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm8>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	linux,rs485-enabled-at-boot-time;
-	rs485-rx-during-tx;
-	rs485-rts-active-low;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	fsl,uart-has-rtscts;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&usbotg1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg1>;
-	dr_mode = "otg";
-	srp-disable;
-	hnp-disable;
-	adp-disable;
-	over-current-active-low;
-	vbus-supply = <&reg_usb_otg1_vbus>;
-	status = "okay";
-};
-
-&usbotg2 {
-	dr_mode = "host";
-	disable-over-current;
-	vbus-supply = <&reg_5v>;
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
-	keep-power-in-suspend;
-	wakeup-source;
-	vmmc-supply = <&reg_3v3>;
-	voltage-ranges = <3300 3300>;
-	no-1-8-v;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
-	non-removable;
-	keep-power-in-suspend;
-	wakeup-source;
-	vmmc-supply = <&reg_3v3>;
-	voltage-ranges = <3300 3300>;
-	no-1-8-v;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-0 = <&pinctrl_reset_out &pinctrl_gpio>;
-
-	pinctrl_adc1: adc1grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0xb0
-			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0xb0
-			MX6UL_PAD_GPIO1_IO08__GPIO1_IO08	0xb0
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_DATA07__ECSPI1_MISO	0x100b1
-			MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI	0x100b1
-			MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK	0x100b1
-			MX6UL_PAD_CSI_DATA05__GPIO4_IO26	0x100b1	/* ECSPI1-CS1 */
-		>;
-	};
-
-	pinctrl_enet2: enet2grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
-			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
-			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
-			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
-			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
-			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
-			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
-			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b009
-		>;
-	};
-
-	pinctrl_enet2_mdio: enet2mdiogrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
-			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2grp{
-		fsl,pins = <
-			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
-			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
-		>;
-	};
-
-	pinctrl_gpio: gpiogrp {
-		fsl,pins = <
-			MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x1b0b0	/* DOUT1 */
-			MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x1b0b0	/* DIN1 */
-			MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x1b0b0	/* DOUT2 */
-			MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x1b0b0	/* DIN2 */
-		>;
-	};
-
-	pinctrl_gpio_leds: gpioledsgrp {
-		fsl,pins = <
-			MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30	0x1b0b0	/* LED H14 */
-			MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x1b0b0	/* LED H15 */
-			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x1b0b0	/* LED H16 */
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_PIXCLK__I2C1_SCL		0x4001b8b0
-			MX6UL_PAD_CSI_MCLK__I2C1_SDA		0x4001b8b0
-		>;
-	};
-
-	pinctrl_i2c4: i2c4grp {
-		fsl,pins = <
-			MX6UL_PAD_UART2_TX_DATA__I2C4_SCL	0x4001f8b0
-			MX6UL_PAD_UART2_RX_DATA__I2C4_SDA	0x4001f8b0
-		>;
-	};
-
-	pinctrl_pwm8: pwm8grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_HSYNC__PWM8_OUT		0x110b0
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
-			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_DATA04__UART2_DCE_TX	0x1b0b1
-			MX6UL_PAD_NAND_DATA05__UART2_DCE_RX	0x1b0b1
-			MX6UL_PAD_NAND_DATA06__UART2_DCE_CTS	0x1b0b1
-			/*
-			 * mux unused RTS to make sure it doesn't cause
-			 * any interrupts when it is undefined
-			 */
-			MX6UL_PAD_NAND_DATA07__UART2_DCE_RTS	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x1b0b1
-			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x1b0b1
-			MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS	0x1b0b1
-			MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX	0x1b0b1
-			MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX	0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg1: usbotg1 {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0x1b0b0
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
-			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x100b1	/* SD1_CD */
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x10059
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x17059
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x17059
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x17059
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x17059
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
-		>;
-	};
-
-	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100b9
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170b9
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170b9
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170b9
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170b9
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170b9
-		>;
-	};
-
-	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100f9
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170f9
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170f9
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170f9
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170f9
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170f9
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
deleted file mode 100644
index 2a449a3c1ae2..000000000000
--- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
+++ /dev/null
@@ -1,122 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2017 exceet electronics GmbH
- * Copyright (C) 2018 Kontron Electronics GmbH
- * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	chosen {
-		stdout-path = &uart4;
-	};
-};
-
-&ecspi2 {
-	cs-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	status = "okay";
-
-	spi-flash@0 {
-		compatible = "mxicy,mx25v8035f", "jedec,spi-nor";
-		spi-max-frequency = <50000000>;
-		reg = <0>;
-	};
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy1>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy1: ethernet-phy@1 {
-			reg = <1>;
-			micrel,led-mode = <0>;
-			clocks = <&clks IMX6UL_CLK_ENET_REF>;
-			clock-names = "rmii-ref";
-		};
-	};
-};
-
-&fec2 {
-	phy-mode = "rmii";
-	status = "disabled";
-};
-
-&qspi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_qspi>;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_reset_out>;
-
-	pinctrl_ecspi2: ecspi2grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_DATA03__ECSPI2_MISO      0x100b1
-			MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI      0x100b1
-			MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK      0x100b1
-			MX6UL_PAD_CSI_DATA01__GPIO4_IO22       0x100b1
-		>;
-	};
-
-	pinctrl_enet1: enet1grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN      0x1b0b0
-			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER      0x1b0b0
-			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
-			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
-			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN      0x1b0b0
-			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
-			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
-			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1  0x4001b009
-		>;
-	};
-
-	pinctrl_enet1_mdio: enet1mdiogrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO07__ENET1_MDC         0x1b0b0
-			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO        0x1b0b0
-		>;
-	};
-
-	pinctrl_qspi: qspigrp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK        0x70a1
-			MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00   0x70a1
-			MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01     0x70a1
-			MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02     0x70a1
-			MX6UL_PAD_NAND_CLE__QSPI_A_DATA03       0x70a1
-			MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B        0x70a1
-		>;
-	};
-
-	pinctrl_reset_out: rstoutgrp {
-		fsl,pins = <
-			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09      0x1b0b0
-		>;
-	};
-
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY    0x18b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-tx6ul-0010.dts b/arch/arm/boot/dts/imx6ul-tx6ul-0010.dts
deleted file mode 100644
index 8c2f3df79b47..000000000000
--- a/arch/arm/boot/dts/imx6ul-tx6ul-0010.dts
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6ul.dtsi"
-#include "imx6ul-tx6ul.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TXUL-0010 Module";
-	compatible = "karo,imx6ul-tx6ul", "fsl,imx6ul";
-
-	aliases {
-		/delete-property/ mmc1;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-tx6ul-0011.dts b/arch/arm/boot/dts/imx6ul-tx6ul-0011.dts
deleted file mode 100644
index d82698e7d50f..000000000000
--- a/arch/arm/boot/dts/imx6ul-tx6ul-0011.dts
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6ul.dtsi"
-#include "imx6ul-tx6ul.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TXUL-0011 Module";
-	compatible = "karo,imx6ul-tx6ul", "fsl,imx6ul";
-
-	aliases {
-		mmc0 = &usdhc2;
-		mmc1 = &usdhc1;
-	};
-};
-
-&gpmi {
-	status = "disabled";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	bus-width = <4>;
-	no-1-8-v;
-	non-removable;
-	fsl,wp-controller;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts b/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts
deleted file mode 100644
index 97686097a86e..000000000000
--- a/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6ul.dtsi"
-#include "imx6ul-tx6ul.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TXUL-0010 Module on TXUL Mainboard";
-	compatible = "karo,imx6ul-tx6ul", "fsl,imx6ul";
-
-	aliases {
-		lcdif-24bit-pins-a = &pinctrl_disp0_3;
-		mmc0 = &usdhc1;
-		/delete-property/ mmc1;
-		serial2 = &uart3;
-		serial4 = &uart5;
-	};
-	/delete-node/ sound;
-};
-
-&can1 {
-	xceiver-supply = <&reg_3v3>;
-};
-
-&can2 {
-	xceiver-supply = <&reg_3v3>;
-};
-
-&ds1339 {
-	status = "disabled";
-};
-
-&fec1 {
-	pinctrl-0 = <&pinctrl_enet1 &pinctrl_etnphy0_rst>;
-	/delete-node/ mdio;
-};
-
-&fec2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio &pinctrl_etnphy1_rst>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
-	phy-supply = <&reg_3v3_etn>;
-	phy-handle = <&etnphy1>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		etnphy0: ethernet-phy@0 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_etnphy0_int>;
-			interrupt-parent = <&gpio5>;
-			interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
-			interrupts-extended = <&gpio5 5 IRQ_TYPE_EDGE_FALLING>;
-			status = "okay";
-		};
-
-		etnphy1: ethernet-phy@2 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <2>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_etnphy1_int>;
-			interrupt-parent = <&gpio4>;
-			interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
-			interrupts-extended = <&gpio4 27 IRQ_TYPE_EDGE_FALLING>;
-			status = "okay";
-		};
-	};
-};
-
-&i2c_gpio {
-	status = "disabled";
-};
-
-&i2c2 {
-	/delete-node/ codec@a;
-	/delete-node/ touchscreen@48;
-
-	rtc: mcp7940x@6f {
-		compatible = "microchip,mcp7940x";
-		reg = <0x6f>;
-	};
-};
-
-&kpp {
-	status = "disabled";
-};
-
-&lcdif {
-	pinctrl-0 = <&pinctrl_disp0_3>;
-};
-
-&reg_usbotg_vbus{
-	status = "disabled";
-};
-
-&usdhc1 {
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	non-removable;
-	/delete-property/ cd-gpios;
-	cap-sdio-irq;
-};
-
-&uart1 {
-	pinctrl-0 = <&pinctrl_uart1>;
-	/delete-property/ uart-has-rtscts;
-};
-
-&uart2 {
-	pinctrl-0 = <&pinctrl_uart2>;
-	/delete-property/ uart-has-rtscts;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&uart6 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart6>;
-	status = "okay";
-};
-
-&uart7 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart7>;
-	status = "okay";
-};
-
-&uart8 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart8>;
-	status = "disabled"; /* conflicts with LCDIF */
-};
-
-&iomuxc {
-	hoggrp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_DATA01__GPIO4_IO22	0x0b0b0 /* WLAN_RESET */
-		>;
-	};
-
-	pinctrl_disp0_3: disp0grp-3 {
-		fsl,pins = <
-			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x10 /* LSCLK */
-			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x10 /* OE_ACD */
-			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x10 /* HSYNC */
-			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x10 /* VSYNC */
-			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x10
-			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x10
-			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x10
-			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x10
-			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x10
-			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x10
-			/* LCD_DATA08..09 not wired */
-			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x10
-			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x10
-			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x10
-			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x10
-			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x10
-			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x10
-			/* LCD_DATA16..17 not wired */
-			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18	0x10
-			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19	0x10
-			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20	0x10
-			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21	0x10
-			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22	0x10
-			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23	0x10
-		>;
-	};
-
-	pinctrl_enet2_mdio: enet2-mdiogrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x0b0b0
-			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x0b0b0
-			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x0b0b0
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX	0x0b0b0
-			MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX	0x0b0b0
-		>;
-	};
-
-	pinctrl_uart6: uart6grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_MCLK__UART6_DCE_TX	0x0b0b0
-			MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX	0x0b0b0
-		>;
-	};
-
-	pinctrl_uart7: uart7grp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA16__UART7_DCE_TX	0x0b0b0
-			MX6UL_PAD_LCD_DATA17__UART7_DCE_RX	0x0b0b0
-		>;
-	};
-
-	pinctrl_uart8: uart8grp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA20__UART8_DCE_TX	0x0b0b0
-			MX6UL_PAD_LCD_DATA21__UART8_DCE_RX	0x0b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts
deleted file mode 100644
index 08669a18349e..000000000000
--- a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Copyright 2018 Toradex AG
- */
-
-/dts-v1/;
-
-#include "imx6ull-colibri-nonwifi.dtsi"
-#include "imx6ull-colibri-eval-v3.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX6ULL 256MB on Colibri Evaluation Board V3";
-	compatible = "toradex,colibri-imx6ull-eval", "fsl,imx6ull";
-};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi
deleted file mode 100644
index a78849fd2afa..000000000000
--- a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi
+++ /dev/null
@@ -1,178 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Copyright 2017 Toradex AG
- */
-
-/ {
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_snvs_gpiokeys>;
-
-		power {
-			label = "Wake-Up";
-			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_WAKEUP>;
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-	};
-
-	/* fixed crystal dedicated to mcp2515 */
-	clk16m: clk16m {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <16000000>;
-	};
-
-	panel: panel {
-		compatible = "edt,et057090dhu";
-		backlight = <&bl>;
-		power-supply = <&reg_3v3>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lcdif_out>;
-			};
-		};
-	};
-
-	reg_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_5v0: regulator-5v0 {
-		compatible = "regulator-fixed";
-		regulator-name = "5V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_usbh_vbus: regulator-usbh-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbh_reg>;
-		regulator-name = "VCC_USB[1-4]";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
-		vin-supply = <&reg_5v0>;
-	};
-};
-
-&adc1 {
-	status = "okay";
-};
-
-&bl {
-	brightness-levels = <0 4 8 16 32 64 128 255>;
-	default-brightness-level = <6>;
-	power-supply = <&reg_3v3>;
-	pwms = <&pwm4 0 5000000 1>;
-	status = "okay";
-};
-
-&ecspi1 {
-	status = "okay";
-
-	mcp2515: can@0 {
-		compatible = "microchip,mcp2515";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_can_int>;
-		reg = <0>;
-		clocks = <&clk16m>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
-		spi-max-frequency = <10000000>;
-		vdd-supply = <&reg_3v3>;
-		xceiver-supply = <&reg_5v0>;
-		status = "okay";
-	};
-};
-
-&i2c1 {
-	status = "okay";
-
-	/* M41T0M6 real time clock on carrier board */
-	m41t0m6: rtc@68 {
-		compatible = "st,m41t0";
-		reg = <0x68>;
-	};
-};
-
-&lcdif {
-	status = "okay";
-
-	port {
-		lcdif_out: endpoint {
-			remote-endpoint = <&panel_in>;
-		};
-	};
-};
-
-/* PWM <A> */
-&pwm4 {
-	status = "okay";
-};
-
-/* PWM <B> */
-&pwm5 {
-	status = "okay";
-};
-
-/* PWM <C> */
-&pwm6 {
-	status = "okay";
-};
-
-/* PWM <D> */
-&pwm7 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&usbotg1 {
-	status = "okay";
-};
-
-&usbotg2 {
-	vbus-supply = <&reg_usbh_vbus>;
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
-	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd>;
-	pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_snvs_usdhc1_cd>;
-	pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_snvs_usdhc1_cd>;
-	pinctrl-3 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_sleep_cd>;
-	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
-	disable-wp;
-	wakeup-source;
-	keep-power-in-suspend;
-	vmmc-supply = <&reg_3v3>;
-	vqmmc-supply = <&reg_sd1_vmmc>;
-	sd-uhs-sdr12;
-	sd-uhs-sdr25;
-	sd-uhs-sdr50;
-	sd-uhs-sdr104;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi
deleted file mode 100644
index 95a11b8bcbdb..000000000000
--- a/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi
+++ /dev/null
@@ -1,24 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Copyright 2018 Toradex AG
- */
-
-#include "imx6ull-colibri.dtsi"
-
-/ {
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3
-		&pinctrl_gpio4 &pinctrl_gpio5 &pinctrl_gpio6 &pinctrl_gpio7>;
-};
-
-&iomuxc_snvs {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio2 &pinctrl_snvs_gpio3>;
-};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts b/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts
deleted file mode 100644
index df72ce1ae2cb..000000000000
--- a/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Copyright 2018 Toradex AG
- */
-
-/dts-v1/;
-
-#include "imx6ull-colibri-wifi.dtsi"
-#include "imx6ull-colibri-eval-v3.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX6ULL 512MB on Colibri Evaluation Board V3";
-	compatible = "toradex,colibri-imx6ull-wifi-eval", "fsl,imx6ull";
-};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
deleted file mode 100644
index 9f1e38282bee..000000000000
--- a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
+++ /dev/null
@@ -1,53 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Copyright 2018 Toradex AG
- */
-
-#include "imx6ull-colibri.dtsi"
-
-/ {
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>;
-	};
-
-	wifi_pwrseq: sdio-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_snvs_wifi_pdn>;
-		reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&cpu0 {
-	clock-frequency = <792000000>;
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3
-		&pinctrl_gpio4 &pinctrl_gpio5 &pinctrl_gpio7>;
-
-};
-
-&iomuxc_snvs {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio2>;
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	assigned-clocks = <&clks IMX6UL_CLK_USDHC2_SEL>, <&clks IMX6UL_CLK_USDHC2>;
-	assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>;
-	assigned-clock-rates = <0>, <198000000>;
-	cap-power-off-card;
-	keep-power-in-suspend;
-	max-frequency = <25000000>;
-	mmc-pwrseq = <&wifi_pwrseq>;
-	no-1-8-v;
-	non-removable;
-	vmmc-supply = <&reg_module_3v3>;
-	wakeup-source;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi
deleted file mode 100644
index 0cdbf7b6e728..000000000000
--- a/arch/arm/boot/dts/imx6ull-colibri.dtsi
+++ /dev/null
@@ -1,607 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Copyright 2018 Toradex AG
- */
-
-#include "imx6ull.dtsi"
-
-/ {
-	aliases {
-		ethernet0 = &fec2;
-		ethernet1 = &fec1;
-	};
-
-	bl: backlight {
-		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_bl_on>;
-		enable-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
-		status = "disabled";
-	};
-
-	reg_module_3v3: regulator-module-3v3 {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-name = "+V3.3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_module_3v3_avdd: regulator-module-3v3-avdd {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-name = "+V3.3_AVDD_AUDIO";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_sd1_vmmc: regulator-sd1-vmmc {
-		compatible = "regulator-gpio";
-		gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_snvs_reg_sd>;
-		regulator-always-on;
-		regulator-name = "+V3.3_1.8_SD";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-		states = <1800000 0x1 3300000 0x0>;
-		vin-supply = <&reg_module_3v3>;
-	};
-};
-
-&adc1 {
-	num-channels = <10>;
-	vref-supply = <&reg_module_3v3_avdd>;
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	status = "disabled";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	status = "disabled";
-};
-
-/* Colibri SPI */
-&ecspi1 {
-	cs-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
-};
-
-&fec2 {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&pinctrl_enet2>;
-	pinctrl-1 = <&pinctrl_enet2_sleep>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy1>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy1: ethernet-phy@2 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			max-speed = <100>;
-			reg = <2>;
-		};
-	};
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	nand-on-flash-bbt;
-	nand-ecc-mode = "hw";
-	nand-ecc-strength = <8>;
-	nand-ecc-step-size = <512>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-};
-
-&i2c2 {
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	pinctrl-1 = <&pinctrl_i2c2_gpio>;
-	sda-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	scl-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "okay";
-
-	ad7879@2c {
-		compatible = "adi,ad7879-1";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_snvs_ad7879_int>;
-		reg = <0x2c>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
-		touchscreen-max-pressure = <4096>;
-		adi,resistance-plate-x = <120>;
-		adi,first-conversion-delay = /bits/ 8 <3>;
-		adi,acquisition-time = /bits/ 8 <1>;
-		adi,median-filter-size = /bits/ 8 <2>;
-		adi,averaging = /bits/ 8 <1>;
-		adi,conversion-interval = /bits/ 8 <255>;
-	};
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lcdif_dat
-		     &pinctrl_lcdif_ctrl>;
-};
-
-&pwm4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-};
-
-&pwm5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm5>;
-};
-
-&pwm6 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm6>;
-};
-
-&pwm7 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm7>;
-};
-
-&sdma {
-	status = "okay";
-};
-
-&snvs_pwrkey {
-	status = "disabled";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_ctrl1>;
-	uart-has-rtscts;
-	fsl,dte-mode;
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	uart-has-rtscts;
-	fsl,dte-mode;
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	fsl,dte-mode;
-};
-
-&usbotg1 {
-	dr_mode = "otg";
-	srp-disable;
-	hnp-disable;
-	adp-disable;
-};
-
-&usbotg2 {
-	dr_mode = "host";
-};
-
-&usdhc1 {
-	assigned-clocks = <&clks IMX6UL_CLK_USDHC1_SEL>, <&clks IMX6UL_CLK_USDHC1>;
-	assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>;
-	assigned-clock-rates = <0>, <198000000>;
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-};
-
-&iomuxc {
-	pinctrl_can_int: canint-grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04	0x13010	/* SODIMM 73 */
-		>;
-	};
-
-	pinctrl_enet2: enet2-grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
-			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
-			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
-			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
-			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
-			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
-			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
-			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
-			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
-			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
-		>;
-	};
-
-	pinctrl_enet2_sleep: enet2sleepgrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO06__GPIO1_IO06	0x0
-			MX6UL_PAD_GPIO1_IO07__GPIO1_IO07	0x0
-			MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08	0x0
-			MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09	0x0
-			MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10	0x0
-			MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15	0x0
-			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
-			MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11	0x0
-			MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12	0x0
-			MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13	0x0
-		>;
-	};
-
-	pinctrl_ecspi1_cs: ecspi1-cs-grp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA21__GPIO3_IO26	0x70a0	/* SODIMM 86 */
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1-grp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK	0x000a0	/* SODIMM 88 */
-			MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI	0x000a0 /* SODIMM 92 */
-			MX6UL_PAD_LCD_DATA23__ECSPI1_MISO	0x100a0 /* SODIMM 90 */
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1-grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX	0x1b020
-			MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX	0x1b020
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2-grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX	0x1b020
-			MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX	0x1b020
-		>;
-	};
-
-	pinctrl_gpio_bl_on: gpio-bl-on-grp {
-		fsl,pins = <
-			MX6UL_PAD_JTAG_TMS__GPIO1_IO11		0x30a0	/* SODIMM 71 */
-		>;
-	};
-
-	pinctrl_gpio1: gpio1-grp {
-		fsl,pins = <
-			MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25	0x10b0 /* SODIMM 77 */
-			MX6UL_PAD_JTAG_TCK__GPIO1_IO14		0x70a0 /* SODIMM 99 */
-			MX6UL_PAD_NAND_CE1_B__GPIO4_IO14	0x10b0 /* SODIMM 133 */
-			MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24	0x10b0 /* SODIMM 135 */
-			MX6UL_PAD_UART3_CTS_B__GPIO1_IO26	0x10b0 /* SODIMM 100 */
-			MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15	0x70a0 /* SODIMM 102 */
-			MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07	0x10b0 /* SODIMM 104 */
-			MX6UL_PAD_UART3_RTS_B__GPIO1_IO27	0x10b0 /* SODIMM 186 */
-		>;
-	};
-
-	pinctrl_gpio2: gpio2-grp { /* Camera */
-		fsl,pins = <
-			MX6UL_PAD_CSI_DATA04__GPIO4_IO25	0x10b0 /* SODIMM 69 */
-			MX6UL_PAD_CSI_MCLK__GPIO4_IO17		0x10b0 /* SODIMM 75 */
-			MX6UL_PAD_CSI_DATA06__GPIO4_IO27	0x10b0 /* SODIMM 85 */
-			MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18	0x10b0 /* SODIMM 96 */
-			MX6UL_PAD_CSI_DATA05__GPIO4_IO26	0x10b0 /* SODIMM 98 */
-		>;
-	};
-
-	pinctrl_gpio3: gpio3-grp { /* CAN2 */
-		fsl,pins = <
-			MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02	0x10b0 /* SODIMM 178 */
-			MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03	0x10b0 /* SODIMM 188 */
-		>;
-	};
-
-	pinctrl_gpio4: gpio4-grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_DATA07__GPIO4_IO28	0x10b0 /* SODIMM 65 */
-		>;
-	};
-
-	pinctrl_gpio5: gpio5-grp { /* ATMEL MXT TOUCH */
-		fsl,pins = <
-			MX6UL_PAD_JTAG_MOD__GPIO1_IO10		0xb0a0 /* SODIMM 106 */
-		>;
-	};
-
-	pinctrl_gpio6: gpio6-grp { /* Wifi pins */
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0x10b0 /* SODIMM 89 */
-			MX6UL_PAD_CSI_DATA02__GPIO4_IO23	0x10b0 /* SODIMM 79 */
-			MX6UL_PAD_CSI_VSYNC__GPIO4_IO19		0x10b0 /* SODIMM 81 */
-			MX6UL_PAD_CSI_DATA03__GPIO4_IO24	0x10b0 /* SODIMM 97 */
-			MX6UL_PAD_CSI_DATA00__GPIO4_IO21	0x10b0 /* SODIMM 101 */
-			MX6UL_PAD_CSI_DATA01__GPIO4_IO22	0x10b0 /* SODIMM 103 */
-			MX6UL_PAD_CSI_HSYNC__GPIO4_IO20		0x10b0 /* SODIMM 94 */
-		>;
-	};
-
-	pinctrl_gpio7: gpio7-grp { /* CAN1 */
-		fsl,pins = <
-			MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00	0xb0b0/* SODIMM 55 */
-			MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01	0xb0b0 /* SODIMM 63 */
-		>;
-	};
-
-	pinctrl_gpmi_nand: gpmi-nand-grp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0x100a9
-			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01	0x100a9
-			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02	0x100a9
-			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03	0x100a9
-			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04	0x100a9
-			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05	0x100a9
-			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06	0x100a9
-			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07	0x100a9
-			MX6UL_PAD_NAND_CLE__RAWNAND_CLE		0x100a9
-			MX6UL_PAD_NAND_ALE__RAWNAND_ALE		0x100a9
-			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B	0x100a9
-			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B	0x100a9
-			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B	0x100a9
-			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B	0x100a9
-		>;
-	};
-
-	pinctrl_i2c1: i2c1-grp {
-		fsl,pins = <
-			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0	/* SODIMM 196 */
-			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0	/* SODIMM 194 */
-		>;
-	};
-
-	pinctrl_i2c1_gpio: i2c1-gpio-grp {
-		fsl,pins = <
-			MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x4001b8b0	/* SODIMM 196 */
-			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x4001b8b0	/* SODIMM 194 */
-		>;
-	};
-
-	pinctrl_i2c2: i2c2-grp {
-		fsl,pins = <
-			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
-			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
-		>;
-	};
-
-	pinctrl_i2c2_gpio: i2c2-gpio-grp {
-		fsl,pins = <
-			MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x4001b8b0
-			MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x4001b8b0
-		>;
-	};
-
-	pinctrl_lcdif_dat: lcdif-dat-grp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x00079	/* SODIMM 76 */
-			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x00079	/* SODIMM 70 */
-			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x00079	/* SODIMM 60 */
-			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x00079	/* SODIMM 58 */
-			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x00079	/* SODIMM 78 */
-			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x00079	/* SODIMM 72 */
-			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x00079	/* SODIMM 80 */
-			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x00079	/* SODIMM 46 */
-			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x00079	/* SODIMM 62 */
-			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x00079	/* SODIMM 48 */
-			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x00079	/* SODIMM 74 */
-			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x00079	/* SODIMM 50 */
-			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x00079	/* SODIMM 52 */
-			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x00079	/* SODIMM 54 */
-			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x00079	/* SODIMM 66 */
-			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x00079	/* SODIMM 64 */
-			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x00079	/* SODIMM 57 */
-			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x00079	/* SODIMM 61 */
-		>;
-	};
-
-	pinctrl_lcdif_ctrl: lcdif-ctrl-grp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_CLK__LCDIF_CLK	    0x00079	/* SODIMM 56 */
-			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x00079	/* SODIMM 44 */
-			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x00079	/* SODIMM 68 */
-			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x00079	/* SODIMM 82 */
-		>;
-	};
-
-	pinctrl_pwm4: pwm4-grp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_WP_B__PWM4_OUT	0x00079		/* SODIMM 59 */
-		>;
-	};
-
-	pinctrl_pwm5: pwm5-grp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_DQS__PWM5_OUT	0x00079		/* SODIMM 28 */
-		>;
-	};
-
-	pinctrl_pwm6: pwm6-grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET1_TX_EN__PWM6_OUT	0x00079		/* SODIMM 30 */
-		>;
-	};
-
-	pinctrl_pwm7: pwm7-grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT	0x00079	/* SODIMM 67 */
-		>;
-	};
-
-	pinctrl_uart1: uart1-grp {
-		fsl,pins = <
-			MX6UL_PAD_UART1_TX_DATA__UART1_DTE_RX	0x1b0b1	/* SODIMM 33 */
-			MX6UL_PAD_UART1_RX_DATA__UART1_DTE_TX	0x1b0b1	/* SODIMM 35 */
-			MX6UL_PAD_UART1_RTS_B__UART1_DTE_CTS	0x1b0b1	/* SODIMM 27 */
-			MX6UL_PAD_UART1_CTS_B__UART1_DTE_RTS	0x1b0b1	/* SODIMM 25 */
-		>;
-	};
-
-	pinctrl_uart1_ctrl1: uart1-ctrl1-grp { /* Additional DTR, DCD */
-		fsl,pins = <
-			MX6UL_PAD_JTAG_TDI__GPIO1_IO13		0x70a0 /* SODIMM 31 */
-			MX6UL_PAD_LCD_DATA18__GPIO3_IO23	0x10b0 /* SODIMM 29 */
-			MX6UL_PAD_JTAG_TDO__GPIO1_IO12		0x90b1 /* SODIMM 23 */
-			MX6UL_PAD_LCD_DATA19__GPIO3_IO24        0x10b0 /* SODIMM 37 */
-		>;
-	};
-
-	pinctrl_uart2: uart2-grp {
-		fsl,pins = <
-			MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX	0x1b0b1 /* SODIMM 36 */
-			MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX	0x1b0b1 /* SODIMM 38 */
-			MX6UL_PAD_UART2_CTS_B__UART2_DTE_RTS	0x1b0b1 /* SODIMM 32 */
-			MX6UL_PAD_UART2_RTS_B__UART2_DTE_CTS	0x1b0b1 /* SODIMM 34 */
-		>;
-	};
-	pinctrl_uart5: uart5-grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO04__UART5_DTE_RX	0x1b0b1 /* SODIMM 19 */
-			MX6UL_PAD_GPIO1_IO05__UART5_DTE_TX	0x1b0b1 /* SODIMM 21 */
-		>;
-	};
-
-	pinctrl_usbh_reg: gpio-usbh-reg {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0x10b0 /* SODIMM 129 */
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1-grp {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x17059 /* SODIMM 47 */
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x10059 /* SODIMM 190 */
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059 /* SODIMM 192 */
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059 /* SODIMM 49 */
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059 /* SODIMM 51 */
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059 /* SODIMM 53 */
-		>;
-	};
-
-	pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x170b9
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x100b9
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
-		>;
-	};
-
-	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x170f9
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x100f9
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2-grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_DATA00__USDHC2_DATA0	0x17069
-			MX6UL_PAD_CSI_DATA01__USDHC2_DATA1	0x17069
-			MX6UL_PAD_CSI_DATA02__USDHC2_DATA2	0x17069
-			MX6UL_PAD_CSI_DATA03__USDHC2_DATA3	0x17069
-			MX6UL_PAD_CSI_HSYNC__USDHC2_CMD		0x17069
-			MX6UL_PAD_CSI_VSYNC__USDHC2_CLK		0x17069
-
-			MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT	0x10
-		>;
-	};
-
-	pinctrl_wdog: wdog-grp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY    0x30b0
-		>;
-	};
-};
-
-&iomuxc_snvs {
-	pinctrl_snvs_gpio1: snvs-gpio1-grp {
-		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x110a0	/* SODIMM 93 */
-			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x110a0	/* SODIMM 95 */
-			MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10	0x1b0a0	/* SODIMM 105 */
-			MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x0b0a0	/* SODIMM 131 */
-			MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x110a0	/* SODIMM 138 */
-		>;
-	};
-
-	pinctrl_snvs_gpio2: snvs-gpio2-grp { /* ATMEL MXT TOUCH */
-		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04	0xb0a0	/* SODIMM 107 */
-		>;
-	};
-
-	pinctrl_snvs_gpio3: snvs-gpio3-grp { /* Wifi pins */
-		fsl,pins = <
-			MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11	0x130a0	/* SODIMM 127 */
-		>;
-	};
-
-	pinctrl_snvs_ad7879_int: snvs-ad7879-int-grp { /* TOUCH Interrupt */
-		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x100b0
-		>;
-	};
-
-	pinctrl_snvs_reg_sd: snvs-reg-sd-grp {
-		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x400100b0
-		>;
-	};
-
-	pinctrl_snvs_usbc_det: snvs-usbc-det-grp {
-		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x130b0
-		>;
-	};
-
-	pinctrl_snvs_gpiokeys: snvs-gpiokeys-grp {
-		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x130a0	/* SODIMM 45 */
-		>;
-	};
-
-	pinctrl_snvs_usdhc1_cd: snvs-usdhc1-cd-grp {
-		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x1b0a0 /* SODIMM 43 */
-		>;
-	};
-
-	pinctrl_snvs_usdhc1_sleep_cd: snvs-usdhc1-cd-grp-slp {
-		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x0
-		>;
-	};
-
-	pinctrl_snvs_wifi_pdn: snvs-wifi-pdn-grp {
-		fsl,pins = <
-			MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11	0x130a0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ull-kontron-n6411-s.dts b/arch/arm/boot/dts/imx6ull-kontron-n6411-s.dts
deleted file mode 100644
index 57588a5e1e34..000000000000
--- a/arch/arm/boot/dts/imx6ull-kontron-n6411-s.dts
+++ /dev/null
@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2017 exceet electronics GmbH
- * Copyright (C) 2019 Kontron Electronics GmbH
- */
-
-/dts-v1/;
-
-#include "imx6ull-kontron-n6411-som.dtsi"
-#include "imx6ul-kontron-n6x1x-s.dtsi"
-
-/ {
-	model = "Kontron N6411 S";
-	compatible = "kontron,imx6ull-n6411-s", "kontron,imx6ull-n6411-som",
-		     "fsl,imx6ull";
-};
diff --git a/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi b/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi
deleted file mode 100644
index b7e984284e1a..000000000000
--- a/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi
+++ /dev/null
@@ -1,40 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2017 exceet electronics GmbH
- * Copyright (C) 2018 Kontron Electronics GmbH
- */
-
-#include "imx6ull.dtsi"
-#include "imx6ul-kontron-n6x1x-som-common.dtsi"
-
-/ {
-	model = "Kontron N6411 SOM";
-	compatible = "kontron,imx6ull-n6311-som", "fsl,imx6ull";
-
-	memory@80000000 {
-		reg = <0x80000000 0x20000000>;
-		device_type = "memory";
-	};
-};
-
-&qspi {
-	spi-flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "spi-nand";
-		spi-max-frequency = <104000000>;
-		spi-tx-bus-width = <4>;
-		spi-rx-bus-width = <4>;
-		reg = <0>;
-
-		partition@0 {
-			label = "ubi1";
-			reg = <0x00000000 0x08000000>;
-		};
-
-		partition@8000000 {
-			label = "ubi2";
-			reg = <0x08000000 0x18000000>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx7-colibri-aster.dtsi b/arch/arm/boot/dts/imx7-colibri-aster.dtsi
deleted file mode 100644
index 139188eb9f40..000000000000
--- a/arch/arm/boot/dts/imx7-colibri-aster.dtsi
+++ /dev/null
@@ -1,169 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Copyright 2017-2020 Toradex AG
- *
- */
-
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpiokeys>;
-
-		power {
-			label = "Wake-Up";
-			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_WAKEUP>;
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-	};
-
-	panel: panel {
-		compatible = "edt,et057090dhu";
-		backlight = <&bl>;
-		power-supply = <&reg_3v3>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lcdif_out>;
-			};
-		};
-	};
-
-	reg_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_5v0: regulator-5v0 {
-		compatible = "regulator-fixed";
-		regulator-name = "5V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_usbh_vbus: regulator-usbh-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbh_reg>;
-		regulator-name = "VCC_USB[1-4]";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio4 7 GPIO_ACTIVE_LOW>;
-		vin-supply = <&reg_5v0>;
-	};
-};
-
-&adc1 {
-	status = "okay";
-};
-
-/*
- * ADC2 is not available on the Aster board and
- * conflicts with AD7879 resistive touchscreen.
- */
-&adc2 {
-	status = "disabled";
-};
-
-&bl {
-	brightness-levels = <0 4 8 16 32 64 128 255>;
-	default-brightness-level = <6>;
-	power-supply = <&reg_3v3>;
-	status = "okay";
-};
-
-&fec1 {
-	status = "okay";
-};
-
-&i2c4 {
-	status = "okay";
-
-	/* Microchip/Atmel maxtouch controller */
-	touchscreen@4a {
-		compatible = "atmel,maxtouch";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpiotouch>;
-		reg = <0x4a>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;	/* SODIMM 107 */
-		reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;	/* SODIMM 106 */
-	};
-
-	/* M41T0M6 real time clock on carrier board */
-	rtc: m41t0m6@68 {
-		compatible = "st,m41t0";
-		reg = <0x68>;
-	};
-};
-
-&iomuxc {
-	pinctrl_gpiotouch: touchgpios {
-		fsl,pins = <
-			MX7D_PAD_EPDC_DATA15__GPIO2_IO15        0x74
-			MX7D_PAD_EPDC_BDR0__GPIO2_IO28          0x14
-		>;
-	};
-};
-
-&lcdif {
-	status = "okay";
-
-	port {
-		lcdif_out: endpoint {
-			remote-endpoint = <&panel_in>;
-		};
-	};
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&pwm2 {
-	status = "okay";
-};
-
-&pwm3 {
-	status = "okay";
-};
-
-&pwm4 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&usbotg1 {
-	status = "okay";
-};
-
-&usdhc1 {
-	keep-power-in-suspend;
-	no-1-8-v;
-	wakeup-source;
-	vmmc-supply = <&reg_3v3>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
deleted file mode 100644
index 3caf450735d7..000000000000
--- a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
+++ /dev/null
@@ -1,194 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-/*
- * Copyright 2016-2020 Toradex
- */
-
-/ {
-	aliases {
-		rtc0 = &rtc;
-		rtc1 = &snvs_rtc;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	/* fixed crystal dedicated to mpc258x */
-	clk16m: clk16m {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <16000000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpiokeys>;
-
-		power {
-			label = "Wake-Up";
-			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_WAKEUP>;
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-	};
-
-	panel: panel {
-		compatible = "edt,et057090dhu";
-		backlight = <&bl>;
-		power-supply = <&reg_3v3>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lcdif_out>;
-			};
-		};
-	};
-
-	reg_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_5v0: regulator-5v0 {
-		compatible = "regulator-fixed";
-		regulator-name = "5V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_usbh_vbus: regulator-usbh-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbh_reg>;
-		regulator-name = "VCC_USB[1-4]";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio4 7 GPIO_ACTIVE_LOW>;
-		vin-supply = <&reg_5v0>;
-	};
-};
-
-&bl {
-	brightness-levels = <0 4 8 16 32 64 128 255>;
-	default-brightness-level = <6>;
-	power-supply = <&reg_3v3>;
-
-	status = "okay";
-};
-
-&adc1 {
-	status = "okay";
-};
-
-&adc2 {
-	status = "okay";
-};
-
-&ecspi3 {
-	status = "okay";
-
-	mcp2515: can@0 {
-		compatible = "microchip,mcp2515";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_can_int>;
-		reg = <0>;
-		clocks = <&clk16m>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
-		spi-max-frequency = <10000000>;
-		vdd-supply = <&reg_3v3>;
-		xceiver-supply = <&reg_5v0>;
-		status = "okay";
-	};
-};
-
-&fec1 {
-	status = "okay";
-};
-
-&i2c4 {
-	status = "okay";
-
-	/*
-	 * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>,
-	 * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms
-	 */
-	touchscreen@4a {
-		compatible = "atmel,maxtouch";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpiotouch>;
-		reg = <0x4a>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;		/* SODIMM 28 */
-		reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;	/* SODIMM 30 */
-		status = "disabled";
-	};
-
-	/* M41T0M6 real time clock on carrier board */
-	rtc: m41t0m6@68 {
-		compatible = "st,m41t0";
-		reg = <0x68>;
-	};
-};
-
-&lcdif {
-	status = "okay";
-
-	port {
-		lcdif_out: endpoint {
-			remote-endpoint = <&panel_in>;
-		};
-	};
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&pwm2 {
-	status = "okay";
-};
-
-&pwm3 {
-	status = "okay";
-};
-
-&pwm4 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&usbotg1 {
-	status = "okay";
-};
-
-&usdhc1 {
-	keep-power-in-suspend;
-	wakeup-source;
-	vmmc-supply = <&reg_3v3>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_gpiotouch: touchgpios {
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO09__GPIO1_IO9		0x74
-			MX7D_PAD_GPIO1_IO10__GPIO1_IO10		0x14
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
deleted file mode 100644
index 62b771c1d5a9..000000000000
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ /dev/null
@@ -1,941 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-/*
- * Copyright 2016-2020 Toradex
- */
-
-/ {
-	bl: backlight {
-		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_bl_on>;
-		pwms = <&pwm1 0 5000000 0>;
-		enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
-	};
-
-	reg_module_3v3: regulator-module-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "+V3.3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_module_3v3_avdd: regulator-module-3v3-avdd {
-		compatible = "regulator-fixed";
-		regulator-name = "+V3.3_AVDD_AUDIO";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "imx7-sgtl5000";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&dailink_master>;
-		simple-audio-card,frame-master = <&dailink_master>;
-		simple-audio-card,cpu {
-			sound-dai = <&sai1>;
-		};
-
-		dailink_master: simple-audio-card,codec {
-			sound-dai = <&codec>;
-			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
-		};
-	};
-};
-
-&adc1 {
-	vref-supply = <&reg_DCDC3>;
-};
-
-&adc2 {
-	vref-supply = <&reg_DCDC3>;
-};
-
-&cpu0 {
-	cpu-supply = <&reg_DCDC2>;
-};
-
-&ecspi3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3_cs>;
-	cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
-};
-
-&fec1 {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&pinctrl_enet1>;
-	pinctrl-1 = <&pinctrl_enet1_sleep>;
-	clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
-		<&clks IMX7D_ENET_AXI_ROOT_CLK>,
-		<&clks IMX7D_ENET1_TIME_ROOT_CLK>,
-		<&clks IMX7D_PLL_ENET_MAIN_50M_CLK>;
-	clock-names = "ipg", "ahb", "ptp", "enet_clk_ref";
-	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
-			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
-	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
-	assigned-clock-rates = <0>, <100000000>;
-	phy-mode = "rmii";
-	phy-supply = <&reg_LDO1>;
-	fsl,magic-packet;
-};
-
-&flexcan1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	status = "disabled";
-};
-
-&flexcan2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	status = "disabled";
-};
-
-&gpio1 {
-	gpio-line-names = "SODIMM_43",
-			  "SODIMM_45",
-			  "SODIMM_135",
-			  "SODIMM_22",
-			  "",
-			  "",
-			  "SODIMM_37",
-			  "SODIMM_29",
-			  "SODIMM_59",
-			  "SODIMM_28",
-			  "SODIMM_30",
-			  "SODIMM_67",
-			  "",
-			  "",
-			  "SODIMM_188",
-			  "SODIMM_178";
-};
-
-&gpio2 {
-	gpio-line-names = "SODIMM_111",
-			  "SODIMM_113",
-			  "SODIMM_115",
-			  "SODIMM_117",
-			  "SODIMM_119",
-			  "SODIMM_121",
-			  "SODIMM_123",
-			  "SODIMM_125",
-			  "SODIMM_91",
-			  "SODIMM_89",
-			  "SODIMM_105",
-			  "SODIMM_152",
-			  "SODIMM_150",
-			  "SODIMM_95",
-			  "SODIMM_126",
-			  "SODIMM_107",
-			  "SODIMM_114",
-			  "SODIMM_116",
-			  "SODIMM_118",
-			  "SODIMM_120",
-			  "SODIMM_122",
-			  "SODIMM_124",
-			  "SODIMM_127",
-			  "SODIMM_130",
-			  "SODIMM_132",
-			  "SODIMM_134",
-			  "SODIMM_133",
-			  "SODIMM_104",
-			  "SODIMM_106",
-			  "SODIMM_110",
-			  "SODIMM_112",
-			  "SODIMM_128";
-};
-
-&gpio3 {
-	gpio-line-names = "SODIMM_56",
-			  "SODIMM_44",
-			  "SODIMM_68",
-			  "SODIMM_82",
-			  "SODIMM_93",
-			  "SODIMM_76",
-			  "SODIMM_70",
-			  "SODIMM_60",
-			  "SODIMM_58",
-			  "SODIMM_78",
-			  "SODIMM_72",
-			  "SODIMM_80",
-			  "SODIMM_46",
-			  "SODIMM_62",
-			  "SODIMM_48",
-			  "SODIMM_74",
-			  "SODIMM_50",
-			  "SODIMM_52",
-			  "SODIMM_54",
-			  "SODIMM_66",
-			  "SODIMM_64",
-			  "SODIMM_57",
-			  "SODIMM_61",
-			  "SODIMM_136",
-			  "SODIMM_138",
-			  "SODIMM_140",
-			  "SODIMM_142",
-			  "SODIMM_144",
-			  "SODIMM_146";
-};
-
-&gpio4 {
-	gpio-line-names = "SODIMM_35",
-			  "SODIMM_33",
-			  "SODIMM_38",
-			  "SODIMM_36",
-			  "SODIMM_21",
-			  "SODIMM_19",
-			  "SODIMM_131",
-			  "SODIMM_129",
-			  "SODIMM_90",
-			  "SODIMM_92",
-			  "SODIMM_88",
-			  "SODIMM_86",
-			  "SODIMM_81",
-			  "SODIMM_94",
-			  "SODIMM_96",
-			  "SODIMM_75",
-			  "SODIMM_101",
-			  "SODIMM_103",
-			  "SODIMM_79",
-			  "SODIMM_97",
-			  "SODIMM_67",
-			  "SODIMM_59",
-			  "SODIMM_85",
-			  "SODIMM_65";
-};
-
-&gpio5 {
-	gpio-line-names = "SODIMM_69",
-			  "SODIMM_71",
-			  "SODIMM_73",
-			  "SODIMM_47",
-			  "SODIMM_190",
-			  "SODIMM_192",
-			  "SODIMM_49",
-			  "SODIMM_51",
-			  "SODIMM_53",
-			  "",
-			  "",
-			  "SODIMM_98",
-			  "SODIMM_184",
-			  "SODIMM_186",
-			  "SODIMM_23",
-			  "SODIMM_31",
-			  "SODIMM_100",
-			  "SODIMM_102";
-};
-
-&gpio6 {
-	gpio-line-names = "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "SODIMM_169",
-			  "",
-			  "",
-			  "",
-			  "SODIMM_77",
-			  "SODIMM_24",
-			  "",
-			  "SODIMM_25",
-			  "SODIMM_27",
-			  "SODIMM_32",
-			  "SODIMM_34";
-};
-
-&gpio7 {
-	gpio-line-names = "",
-			  "",
-			  "SODIMM_63",
-			  "SODIMM_55",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "SODIMM_196",
-			  "SODIMM_194",
-			  "",
-			  "SODIMM_99",
-			  "",
-			  "",
-			  "SODIMM_137";
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	fsl,use-minimum-ecc;
-	nand-on-flash-bbt;
-	nand-ecc-mode = "hw";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c1 &pinctrl_i2c1_int>;
-	pinctrl-1 = <&pinctrl_i2c1_recovery &pinctrl_i2c1_int>;
-	scl-gpios = <&gpio1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-
-	status = "okay";
-
-	codec: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		#sound-dai-cells = <0>;
-		reg = <0x0a>;
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_sai1_mclk>;
-		VDDA-supply = <&reg_module_3v3_avdd>;
-		VDDIO-supply = <&reg_module_3v3>;
-		VDDD-supply = <&reg_DCDC3>;
-	};
-
-	ad7879@2c {
-		compatible = "adi,ad7879-1";
-		reg = <0x2c>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
-		touchscreen-max-pressure = <4096>;
-		adi,resistance-plate-x = <120>;
-		adi,first-conversion-delay = /bits/ 8 <3>;
-		adi,acquisition-time = /bits/ 8 <1>;
-		adi,median-filter-size = /bits/ 8 <2>;
-		adi,averaging = /bits/ 8 <1>;
-		adi,conversion-interval = /bits/ 8 <255>;
-	};
-
-	pmic@33 {
-		compatible = "ricoh,rn5t567";
-		reg = <0x33>;
-
-		regulators {
-			reg_DCDC1: DCDC1 {  /* V1.0_SOC */
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			reg_DCDC2: DCDC2 { /* V1.1_ARM */
-				regulator-min-microvolt = <975000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			reg_DCDC3: DCDC3 { /* V1.8 */
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			reg_DCDC4: DCDC4 { /* V1.35_DRAM */
-				regulator-min-microvolt = <1350000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			reg_LDO1: LDO1 { /* PWR_EN_+V3.3_ETH */
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-			};
-
-			reg_LDO2: LDO2 { /* +V1.8_SD */
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			reg_LDO3: LDO3 { /* PWR_EN_+V3.3_LPSR */
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			reg_LDO4: LDO4 { /* V1.8_LPSR */
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			reg_LDO5: LDO5 { /* PWR_EN_+V3.3 */
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c4 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c4>;
-	pinctrl-1 = <&pinctrl_i2c4_recovery>;
-	scl-gpios = <&gpio7 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio7 9 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lcdif_dat
-		     &pinctrl_lcdif_ctrl>;
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>;
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-};
-
-&pwm4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-};
-
-&reg_1p0d {
-	vin-supply = <&reg_DCDC3>;
-};
-
-&sai1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sai1>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_ctrl1 &pinctrl_uart1_ctrl2>;
-	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
-	uart-has-rtscts;
-	fsl,dte-mode;
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
-	uart-has-rtscts;
-	fsl,dte-mode;
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
-	fsl,dte-mode;
-};
-
-&usbotg1 {
-	dr_mode = "host";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>;
-	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
-	disable-wp;
-	vqmmc-supply = <&reg_LDO2>;
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
-	assigned-clock-rates = <400000000>;
-	bus-width = <8>;
-	fsl,tuning-step = <2>;
-	vmmc-supply = <&reg_module_3v3>;
-	vqmmc-supply = <&reg_DCDC3>;
-	non-removable;
-	sdhci-caps-mask = <0x80000000 0x0>;
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 &pinctrl_gpio4
-		     &pinctrl_gpio7 &pinctrl_usbc_det>;
-
-	pinctrl_gpio1: gpio1-grp {
-		fsl,pins = <
-			MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16	0x14 /* SODIMM 77 */
-			MX7D_PAD_EPDC_DATA09__GPIO2_IO9		0x14 /* SODIMM 89 */
-			MX7D_PAD_EPDC_DATA08__GPIO2_IO8		0x74 /* SODIMM 91 */
-			MX7D_PAD_LCD_RESET__GPIO3_IO4		0x14 /* SODIMM 93 */
-			MX7D_PAD_EPDC_DATA13__GPIO2_IO13	0x14 /* SODIMM 95 */
-			MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11	0x14 /* SODIMM 99 */
-			MX7D_PAD_EPDC_DATA10__GPIO2_IO10	0x74 /* SODIMM 105 */
-			MX7D_PAD_EPDC_DATA00__GPIO2_IO0		0x14 /* SODIMM 111 */
-			MX7D_PAD_EPDC_DATA01__GPIO2_IO1		0x14 /* SODIMM 113 */
-			MX7D_PAD_EPDC_DATA02__GPIO2_IO2		0x14 /* SODIMM 115 */
-			MX7D_PAD_EPDC_DATA03__GPIO2_IO3		0x14 /* SODIMM 117 */
-			MX7D_PAD_EPDC_DATA04__GPIO2_IO4		0x14 /* SODIMM 119 */
-			MX7D_PAD_EPDC_DATA05__GPIO2_IO5		0x14 /* SODIMM 121 */
-			MX7D_PAD_EPDC_DATA06__GPIO2_IO6		0x14 /* SODIMM 123 */
-			MX7D_PAD_EPDC_DATA07__GPIO2_IO7		0x14 /* SODIMM 125 */
-			MX7D_PAD_EPDC_SDCE2__GPIO2_IO22		0x14 /* SODIMM 127 */
-			MX7D_PAD_UART3_RTS_B__GPIO4_IO6		0x14 /* SODIMM 131 */
-			MX7D_PAD_EPDC_GDRL__GPIO2_IO26		0x14 /* SODIMM 133 */
-			MX7D_PAD_SAI1_RX_DATA__GPIO6_IO12	0x14 /* SODIMM 169 */
-			MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17	0x14 /* SODIMM 24 */
-			MX7D_PAD_SD2_DATA2__GPIO5_IO16		0x14 /* SODIMM 100 */
-			MX7D_PAD_SD2_DATA3__GPIO5_IO17		0x14 /* SODIMM 102 */
-			MX7D_PAD_EPDC_GDSP__GPIO2_IO27		0x14 /* SODIMM 104 */
-			MX7D_PAD_EPDC_BDR1__GPIO2_IO29		0x14 /* SODIMM 110 */
-			MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30	0x14 /* SODIMM 112 */
-			MX7D_PAD_EPDC_SDCLK__GPIO2_IO16		0x14 /* SODIMM 114 */
-			MX7D_PAD_EPDC_SDLE__GPIO2_IO17		0x14 /* SODIMM 116 */
-			MX7D_PAD_EPDC_SDOE__GPIO2_IO18		0x14 /* SODIMM 118 */
-			MX7D_PAD_EPDC_SDSHR__GPIO2_IO19		0x14 /* SODIMM 120 */
-			MX7D_PAD_EPDC_SDCE0__GPIO2_IO20		0x14 /* SODIMM 122 */
-			MX7D_PAD_EPDC_SDCE1__GPIO2_IO21		0x14 /* SODIMM 124 */
-			MX7D_PAD_EPDC_DATA14__GPIO2_IO14	0x14 /* SODIMM 126 */
-			MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31	0x14 /* SODIMM 128 */
-			MX7D_PAD_EPDC_SDCE3__GPIO2_IO23		0x14 /* SODIMM 130 */
-			MX7D_PAD_EPDC_GDCLK__GPIO2_IO24		0x14 /* SODIMM 132 */
-			MX7D_PAD_EPDC_GDOE__GPIO2_IO25		0x14 /* SODIMM 134 */
-			MX7D_PAD_EPDC_DATA12__GPIO2_IO12	0x14 /* SODIMM 150 */
-			MX7D_PAD_EPDC_DATA11__GPIO2_IO11	0x14 /* SODIMM 152 */
-			MX7D_PAD_SD2_CLK__GPIO5_IO12		0x14 /* SODIMM 184 */
-			MX7D_PAD_SD2_CMD__GPIO5_IO13		0x14 /* SODIMM 186 */
-		>;
-	};
-
-	pinctrl_gpio2: gpio2-grp { /* On X22 Camera interface */
-		fsl,pins = <
-			MX7D_PAD_ECSPI2_SS0__GPIO4_IO23		0x14 /* SODIMM 65 */
-			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x74 /* SODIMM 69 */
-			MX7D_PAD_I2C4_SDA__GPIO4_IO15		0x14 /* SODIMM 75 */
-			MX7D_PAD_ECSPI1_MISO__GPIO4_IO18	0x14 /* SODIMM 79 */
-			MX7D_PAD_I2C3_SCL__GPIO4_IO12		0x14 /* SODIMM 81 */
-			MX7D_PAD_ECSPI2_MISO__GPIO4_IO22	0x14 /* SODIMM 85 */
-			MX7D_PAD_ECSPI1_SS0__GPIO4_IO19		0x14 /* SODIMM 97 */
-			MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16	0x14 /* SODIMM 101 */
-			MX7D_PAD_ECSPI1_MOSI__GPIO4_IO17	0x14 /* SODIMM 103 */
-			MX7D_PAD_I2C3_SDA__GPIO4_IO13		0x14 /* SODIMM 94 */
-			MX7D_PAD_I2C4_SCL__GPIO4_IO14		0x14 /* SODIMM 96 */
-			MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x14 /* SODIMM 98 */
-		>;
-	};
-
-	pinctrl_gpio3: gpio3-grp { /* LCD 18-23 */
-		fsl,pins = <
-			MX7D_PAD_LCD_DATA18__GPIO3_IO23		0x14 /* SODIMM 136 */
-			MX7D_PAD_LCD_DATA19__GPIO3_IO24		0x14 /* SODIMM 138 */
-			MX7D_PAD_LCD_DATA20__GPIO3_IO25		0x14 /* SODIMM 140 */
-			MX7D_PAD_LCD_DATA21__GPIO3_IO26		0x14 /* SODIMM 142 */
-			MX7D_PAD_LCD_DATA22__GPIO3_IO27		0x74 /* SODIMM 144 */
-			MX7D_PAD_LCD_DATA23__GPIO3_IO28		0x74 /* SODIMM 146 */
-		>;
-	};
-
-	pinctrl_gpio4: gpio4-grp { /* Alternatively CAN2 */
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO15__GPIO1_IO15		0x14 /* SODIMM 178 */
-			MX7D_PAD_GPIO1_IO14__GPIO1_IO14		0x14 /* SODIMM 188 */
-		>;
-	};
-
-	pinctrl_gpio7: gpio7-grp { /* Alternatively CAN1 */
-		fsl,pins = <
-			MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3	0x14 /* SODIMM 55 */
-			MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2	0x14 /* SODIMM 63 */
-		>;
-	};
-
-	pinctrl_i2c1_int: i2c1-int-grp { /* PMIC / TOUCH */
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO13__GPIO1_IO13	0x79
-		>;
-	};
-
-	pinctrl_can_int: can-int-grp {
-		fsl,pins = <
-			MX7D_PAD_SD1_RESET_B__GPIO5_IO2		0X14 /* SODIMM 73 */
-		>;
-	};
-
-	pinctrl_enet1: enet1grp {
-		fsl,pins = <
-			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x73
-			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x73
-			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x73
-			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RX_ER		0x73
-
-			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x73
-			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x73
-			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x73
-			MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1		0x73
-			MX7D_PAD_SD2_CD_B__ENET1_MDIO			0x3
-			MX7D_PAD_SD2_WP__ENET1_MDC			0x3
-		>;
-	};
-
-	pinctrl_enet1_sleep: enet1sleepgrp {
-		fsl,pins = <
-			MX7D_PAD_ENET1_RGMII_RX_CTL__GPIO7_IO4		0x0
-			MX7D_PAD_ENET1_RGMII_RD0__GPIO7_IO0		0x0
-			MX7D_PAD_ENET1_RGMII_RD1__GPIO7_IO1		0x0
-			MX7D_PAD_ENET1_RGMII_RXC__GPIO7_IO5		0x0
-
-			MX7D_PAD_ENET1_RGMII_TX_CTL__GPIO7_IO10		0x0
-			MX7D_PAD_ENET1_RGMII_TD0__GPIO7_IO6		0x0
-			MX7D_PAD_ENET1_RGMII_TD1__GPIO7_IO7		0x0
-			MX7D_PAD_GPIO1_IO12__GPIO1_IO12			0x0
-			MX7D_PAD_SD2_CD_B__GPIO5_IO9			0x0
-			MX7D_PAD_SD2_WP__GPIO5_IO10			0x0
-		>;
-	};
-
-	pinctrl_ecspi3_cs: ecspi3-cs-grp {
-		fsl,pins = <
-			MX7D_PAD_I2C2_SDA__GPIO4_IO11		0x14
-		>;
-	};
-
-	pinctrl_ecspi3: ecspi3-grp {
-		fsl,pins = <
-			MX7D_PAD_I2C1_SCL__ECSPI3_MISO		0x2
-			MX7D_PAD_I2C1_SDA__ECSPI3_MOSI		0x2
-			MX7D_PAD_I2C2_SCL__ECSPI3_SCLK		0x2
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1-grp {
-		fsl,pins = <
-			MX7D_PAD_ENET1_RGMII_RD3__FLEXCAN1_TX	0x79 /* SODIMM 55 */
-			MX7D_PAD_ENET1_RGMII_RD2__FLEXCAN1_RX	0x79 /* SODIMM 63 */
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2-grp {
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX	0x79 /* SODIMM 188 */
-			MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX	0x79 /* SODIMM 178 */
-		>;
-	};
-
-	pinctrl_gpio_bl_on: gpio-bl-on {
-		fsl,pins = <
-			MX7D_PAD_SD1_WP__GPIO5_IO1		0x14 /* SODIMM 71 */
-		>;
-	};
-
-	pinctrl_gpmi_nand: gpmi-nand-grp {
-		fsl,pins = <
-			MX7D_PAD_SD3_CLK__NAND_CLE		0x71
-			MX7D_PAD_SD3_CMD__NAND_ALE		0x71
-			MX7D_PAD_SAI1_TX_BCLK__NAND_CE0_B	0x71
-			MX7D_PAD_SAI1_TX_DATA__NAND_READY_B	0x74
-			MX7D_PAD_SD3_STROBE__NAND_RE_B		0x71
-			MX7D_PAD_SD3_RESET_B__NAND_WE_B		0x71
-			MX7D_PAD_SD3_DATA0__NAND_DATA00		0x71
-			MX7D_PAD_SD3_DATA1__NAND_DATA01		0x71
-			MX7D_PAD_SD3_DATA2__NAND_DATA02		0x71
-			MX7D_PAD_SD3_DATA3__NAND_DATA03		0x71
-			MX7D_PAD_SD3_DATA4__NAND_DATA04		0x71
-			MX7D_PAD_SD3_DATA5__NAND_DATA05		0x71
-			MX7D_PAD_SD3_DATA6__NAND_DATA06		0x71
-			MX7D_PAD_SD3_DATA7__NAND_DATA07		0x71
-		>;
-	};
-
-	pinctrl_i2c4: i2c4-grp {
-		fsl,pins = <
-			MX7D_PAD_ENET1_RGMII_TD3__I2C4_SDA	0x4000007f
-			MX7D_PAD_ENET1_RGMII_TD2__I2C4_SCL	0x4000007f
-		>;
-	};
-
-	pinctrl_i2c4_recovery: i2c4-recoverygrp {
-		fsl,pins = <
-			MX7D_PAD_ENET1_RGMII_TD2__GPIO7_IO8	0x4000007f
-			MX7D_PAD_ENET1_RGMII_TD3__GPIO7_IO9	0x4000007f
-		>;
-	};
-
-	pinctrl_lcdif_dat: lcdif-dat-grp {
-		fsl,pins = <
-			MX7D_PAD_LCD_DATA00__LCD_DATA0		0x79
-			MX7D_PAD_LCD_DATA01__LCD_DATA1		0x79
-			MX7D_PAD_LCD_DATA02__LCD_DATA2		0x79
-			MX7D_PAD_LCD_DATA03__LCD_DATA3		0x79
-			MX7D_PAD_LCD_DATA04__LCD_DATA4		0x79
-			MX7D_PAD_LCD_DATA05__LCD_DATA5		0x79
-			MX7D_PAD_LCD_DATA06__LCD_DATA6		0x79
-			MX7D_PAD_LCD_DATA07__LCD_DATA7		0x79
-			MX7D_PAD_LCD_DATA08__LCD_DATA8		0x79
-			MX7D_PAD_LCD_DATA09__LCD_DATA9		0x79
-			MX7D_PAD_LCD_DATA10__LCD_DATA10		0x79
-			MX7D_PAD_LCD_DATA11__LCD_DATA11		0x79
-			MX7D_PAD_LCD_DATA12__LCD_DATA12		0x79
-			MX7D_PAD_LCD_DATA13__LCD_DATA13		0x79
-			MX7D_PAD_LCD_DATA14__LCD_DATA14		0x79
-			MX7D_PAD_LCD_DATA15__LCD_DATA15		0x79
-			MX7D_PAD_LCD_DATA16__LCD_DATA16		0x79
-			MX7D_PAD_LCD_DATA17__LCD_DATA17		0x79
-		>;
-	};
-
-	pinctrl_lcdif_dat_24: lcdif-dat-24-grp {
-		fsl,pins = <
-			MX7D_PAD_LCD_DATA18__LCD_DATA18		0x79
-			MX7D_PAD_LCD_DATA19__LCD_DATA19		0x79
-			MX7D_PAD_LCD_DATA20__LCD_DATA20		0x79
-			MX7D_PAD_LCD_DATA21__LCD_DATA21		0x79
-			MX7D_PAD_LCD_DATA22__LCD_DATA22		0x79
-			MX7D_PAD_LCD_DATA23__LCD_DATA23		0x79
-		>;
-	};
-
-	pinctrl_lcdif_ctrl: lcdif-ctrl-grp {
-		fsl,pins = <
-			MX7D_PAD_LCD_CLK__LCD_CLK		0x79
-			MX7D_PAD_LCD_ENABLE__LCD_ENABLE		0x79
-			MX7D_PAD_LCD_VSYNC__LCD_VSYNC		0x79
-			MX7D_PAD_LCD_HSYNC__LCD_HSYNC		0x79
-		>;
-	};
-
-	pinctrl_pwm1: pwm1-grp {
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO08__PWM1_OUT		0x79
-			MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21	0x4
-		>;
-	};
-
-	pinctrl_pwm2: pwm2-grp {
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO09__PWM2_OUT		0x79
-		>;
-	};
-
-	pinctrl_pwm3: pwm3-grp {
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO10__PWM3_OUT		0x79
-		>;
-	};
-
-	pinctrl_pwm4: pwm4-grp {
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO11__PWM4_OUT		0x79
-			MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20	0x4
-		>;
-	};
-
-	pinctrl_uart1: uart1-grp {
-		fsl,pins = <
-			MX7D_PAD_UART1_TX_DATA__UART1_DTE_RX	0x79
-			MX7D_PAD_UART1_RX_DATA__UART1_DTE_TX	0x79
-			MX7D_PAD_SAI2_TX_BCLK__UART1_DTE_CTS	0x79
-			MX7D_PAD_SAI2_TX_SYNC__UART1_DTE_RTS	0x79
-		>;
-	};
-
-	pinctrl_uart1_ctrl1: uart1-ctrl1-grp {
-		fsl,pins = <
-			MX7D_PAD_SD2_DATA1__GPIO5_IO15		0x14 /* DCD */
-			MX7D_PAD_SD2_DATA0__GPIO5_IO14		0x14 /* DTR */
-		>;
-	};
-
-	pinctrl_uart2: uart2-grp {
-		fsl,pins = <
-			MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX 0x79
-			MX7D_PAD_UART2_RX_DATA__UART2_DTE_TX 0x79
-			MX7D_PAD_SAI2_RX_DATA__UART2_DTE_RTS 0x79
-			MX7D_PAD_SAI2_TX_DATA__UART2_DTE_CTS 0x79
-		>;
-	};
-	pinctrl_uart3: uart3-grp {
-		fsl,pins = <
-			MX7D_PAD_UART3_TX_DATA__UART3_DTE_RX 0x79
-			MX7D_PAD_UART3_RX_DATA__UART3_DTE_TX 0x79
-		>;
-	};
-
-	pinctrl_usbc_det: gpio-usbc-det {
-		fsl,pins = <
-			MX7D_PAD_ENET1_CRS__GPIO7_IO14	0x14
-		>;
-	};
-
-	pinctrl_usbh_reg: gpio-usbh-vbus {
-		fsl,pins = <
-			MX7D_PAD_UART3_CTS_B__GPIO4_IO7	0x14 /* SODIMM 129 USBH PEN */
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1-grp {
-		fsl,pins = <
-			MX7D_PAD_SD1_CMD__SD1_CMD	0x59
-			MX7D_PAD_SD1_CLK__SD1_CLK	0x19
-			MX7D_PAD_SD1_DATA0__SD1_DATA0	0x59
-			MX7D_PAD_SD1_DATA1__SD1_DATA1	0x59
-			MX7D_PAD_SD1_DATA2__SD1_DATA2	0x59
-			MX7D_PAD_SD1_DATA3__SD1_DATA3	0x59
-		>;
-	};
-
-	pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
-		fsl,pins = <
-			MX7D_PAD_SD1_CMD__SD1_CMD	0x5a
-			MX7D_PAD_SD1_CLK__SD1_CLK	0x1a
-			MX7D_PAD_SD1_DATA0__SD1_DATA0	0x5a
-			MX7D_PAD_SD1_DATA1__SD1_DATA1	0x5a
-			MX7D_PAD_SD1_DATA2__SD1_DATA2	0x5a
-			MX7D_PAD_SD1_DATA3__SD1_DATA3	0x5a
-		>;
-	};
-
-	pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
-		fsl,pins = <
-			MX7D_PAD_SD1_CMD__SD1_CMD	0x5b
-			MX7D_PAD_SD1_CLK__SD1_CLK	0x1b
-			MX7D_PAD_SD1_DATA0__SD1_DATA0	0x5b
-			MX7D_PAD_SD1_DATA1__SD1_DATA1	0x5b
-			MX7D_PAD_SD1_DATA2__SD1_DATA2	0x5b
-			MX7D_PAD_SD1_DATA3__SD1_DATA3	0x5b
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
-			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
-			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
-			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
-			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
-			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
-			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
-			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
-			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
-			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
-			MX7D_PAD_SD3_STROBE__SD3_STROBE         0x19
-		>;
-	};
-
-	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
-		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
-			MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
-			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5a
-			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5a
-			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5a
-			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5a
-			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5a
-			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5a
-			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5a
-			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5a
-			MX7D_PAD_SD3_STROBE__SD3_STROBE         0x1a
-		>;
-	};
-
-	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
-		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
-			MX7D_PAD_SD3_CLK__SD3_CLK		0x1b
-			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5b
-			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5b
-			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5b
-			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5b
-			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5b
-			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5b
-			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5b
-			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5b
-			MX7D_PAD_SD3_STROBE__SD3_STROBE         0x1b
-		>;
-	};
-
-	pinctrl_sai1: sai1-grp {
-		fsl,pins = <
-			MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK     0x1f
-			MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC	0x1f
-			MX7D_PAD_ENET1_COL__SAI1_TX_DATA0	0x30
-			MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0	0x1f
-		>;
-	};
-
-	pinctrl_sai1_mclk: sai1grp_mclk {
-		fsl,pins = <
-			MX7D_PAD_SAI1_MCLK__SAI1_MCLK           0x1f
-		>;
-	};
-};
-
-&iomuxc_lpsr {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpio_lpsr>;
-
-	pinctrl_gpio_lpsr: gpio1-grp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2	0x59
-			MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3	0x59
-		>;
-	};
-
-	pinctrl_gpiokeys: gpiokeysgrp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1	0x19
-		>;
-	};
-
-	pinctrl_i2c1: i2c1-grp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO05__I2C1_SDA	0x4000007f
-			MX7D_PAD_LPSR_GPIO1_IO04__I2C1_SCL	0x4000007f
-		>;
-	};
-
-	pinctrl_i2c1_recovery: i2c1-recoverygrp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4	0x4000007f
-			MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x4000007f
-		>;
-	};
-
-	pinctrl_cd_usdhc1: usdhc1-cd-grp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0	0x59 /* CD */
-		>;
-	};
-
-	pinctrl_uart1_ctrl2: uart1-ctrl2-grp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7	0x14 /* DSR */
-			MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6	0x14 /* RI */
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx7-mba7.dtsi b/arch/arm/boot/dts/imx7-mba7.dtsi
deleted file mode 100644
index 5e6bef230dc7..000000000000
--- a/arch/arm/boot/dts/imx7-mba7.dtsi
+++ /dev/null
@@ -1,602 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Device Tree Include file for TQ Systems MBa7 carrier board.
- *
- * Copyright (C) 2016 TQ Systems GmbH
- * Author: Markus Niebel <Markus.Niebel@tq-group.com>
- * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
- *
- * Note: This file does not include nodes for all peripheral devices.
- * As device driver coverage increases additional nodes can be added.
- */
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/net/ti-dp83867.h>
-
-/ {
-	aliases {
-		mmc0 = &usdhc3;
-		mmc1 = &usdhc1;
-		/delete-property/ mmc2;
-	};
-
-	beeper {
-		compatible = "gpio-beeper";
-		gpios = <&pca9555 0 GPIO_ACTIVE_HIGH>;
-	};
-
-	chosen {
-		stdout-path = &uart6;
-	};
-
-	gpio_buttons: gpio-keys {
-		compatible = "gpio-keys";
-
-		button-0 {
-			/* #SWITCH_A */
-			label = "S11";
-			linux,code = <KEY_1>;
-			gpios = <&pca9555 13 GPIO_ACTIVE_LOW>;
-		};
-
-		button-1 {
-			/* #SWITCH_B */
-			label = "S12";
-			linux,code = <KEY_2>;
-			gpios = <&pca9555 14 GPIO_ACTIVE_LOW>;
-		};
-
-		button-2 {
-			/* #SWITCH_C */
-			label = "S13";
-			linux,code = <KEY_3>;
-			gpios = <&pca9555 15 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		led1 {
-			label = "led1";
-			gpios = <&pca9555 8 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		led2 {
-			label = "led2";
-			gpios = <&pca9555 9 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	reg_sd1_vmmc: regulator-sd1-vmmc {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC3V3_SD1";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_fec1_pwdn: regulator-fec1-pwdn {
-		compatible = "regulator-fixed";
-		regulator-name = "PWDN_FEC1";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_fec2_pwdn: regulator-fec2-pwdn {
-		compatible = "regulator-fixed";
-		regulator-name = "PWDN_FEC2";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "VBUS_USBOTG1";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "VBUS_USBOTG2";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_mpcie_1v5: regulator-mpcie-1v5 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC1V5_MPCIE";
-		regulator-min-microvolt = <1500000>;
-		regulator-max-microvolt = <1500000>;
-		gpio = <&pca9555 12 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-	};
-
-	reg_mpcie_3v3: regulator-mpcie-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC3V3_MPCIE";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&pca9555 10 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-	};
-
-	reg_mba_12v0: regulator-mba-12v0 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC12V0_MBA7";
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		gpio = <&pca9555 11 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_lvds_transmitter: regulator-lvds-transmitter {
-		compatible = "regulator-fixed";
-		regulator-name = "#SHTDN_LVDS";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&pca9555 1 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_vref_1v8: regulator-vref-1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC1V8_REF";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-		vin-supply = <&sw2_reg>;
-	};
-
-	reg_audio_3v3: regulator-audio-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC3V3_AUDIO";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	sound {
-		compatible = "fsl,imx-audio-tlv320aic32x4";
-		model = "imx-audio-tlv320aic32x4";
-		ssi-controller = <&sai1>;
-		audio-codec = <&tlv320aic32x4>;
-		audio-routing =
-			"IN3_L", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"IN1_L", "Line In Jack",
-			"IN1_R", "Line In Jack",
-			"Line Out Jack", "LOL",
-			"Line Out Jack", "LOR";
-	};
-};
-
-&adc1 {
-	vref-supply = <&reg_vref_1v8>;
-	status = "okay";
-};
-
-&adc2 {
-	vref-supply = <&reg_vref_1v8>;
-	status = "okay";
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>, <&gpio4 1 GPIO_ACTIVE_LOW>,
-		   <&gpio4 2 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&ecspi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	status = "okay";
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1>;
-	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio7 15 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <1>;
-	phy-supply = <&reg_fec1_pwdn>;
-	phy-handle = <&ethphy1_0>;
-	fsl,magic-packet;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy1_0: ethernet-phy@0 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <0>;
-			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
-			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
-			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
-			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
-		};
-	};
-};
-
-&flexcan1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	status = "okay";
-};
-
-&flexcan2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	status = "okay";
-};
-
-&i2c1 {
-	lm75: temperature-sensor@49 {
-		compatible = "national,lm75";
-		reg = <0x49>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	tlv320aic32x4: audio-codec@18 {
-		compatible = "ti,tlv320aic32x4";
-		reg = <0x18>;
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
-		clock-names = "mclk";
-		ldoin-supply = <&reg_audio_3v3>;
-		iov-supply = <&reg_audio_3v3>;
-	};
-
-	pca9555: gpio-expander@20 {
-		compatible = "nxp,pca9555";
-		reg = <0x20>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pca9555>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&gpio7>;
-		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog_mba7_1>;
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO		0x7c
-			MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI		0x74
-			MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK		0x74
-			MX7D_PAD_UART1_RX_DATA__GPIO4_IO0		0x74
-			MX7D_PAD_UART1_TX_DATA__GPIO4_IO1		0x74
-			MX7D_PAD_UART2_RX_DATA__GPIO4_IO2		0x74
-		>;
-	};
-
-	pinctrl_ecspi2: ecspi2grp {
-		fsl,pins = <
-			MX7D_PAD_ECSPI2_MISO__ECSPI2_MISO		0x7c
-			MX7D_PAD_ECSPI2_MOSI__ECSPI2_MOSI		0x74
-			MX7D_PAD_ECSPI2_SCLK__ECSPI2_SCLK		0x74
-			MX7D_PAD_ECSPI2_SS0__ECSPI2_SS0			0x74
-		>;
-	};
-
-	pinctrl_enet1: enet1grp {
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO10__ENET1_MDIO			0x02
-			MX7D_PAD_GPIO1_IO11__ENET1_MDC			0x00
-			MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC	0x71
-			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x71
-			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x71
-			MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2	0x71
-			MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3	0x71
-			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x71
-			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC	0x79
-			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x79
-			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x79
-			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x79
-			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x79
-			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x79
-			/* Reset: SION, 100kPU, SRE_FAST, DSE_X1 */
-			MX7D_PAD_ENET1_COL__GPIO7_IO15		0x40000070
-			/* INT/PWDN: SION, 100kPU, HYS, SRE_FAST, DSE_X1 */
-			MX7D_PAD_GPIO1_IO09__GPIO1_IO9		0x40000078
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp {
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX	0x5a
-			MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX	0x52
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2grp {
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX	0x5a
-			MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX	0x52
-		>;
-	};
-
-	pinctrl_hog_mba7_1: hogmba71grp {
-		fsl,pins = <
-			/* Limitation: WDOG2_B / WDOG2_RESET not usable */
-			MX7D_PAD_ENET1_RX_CLK__GPIO7_IO13	0x4000007c
-			MX7D_PAD_ENET1_CRS__GPIO7_IO14		0x40000074
-			/* #BOOT_EN */
-			MX7D_PAD_UART2_TX_DATA__GPIO4_IO3	0x40000010
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX7D_PAD_I2C2_SCL__I2C2_SCL		0x40000078
-			MX7D_PAD_I2C2_SDA__I2C2_SDA		0x40000078
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX7D_PAD_I2C3_SCL__I2C3_SCL		0x40000078
-			MX7D_PAD_I2C3_SDA__I2C3_SDA		0x40000078
-		>;
-	};
-
-	pinctrl_pca9555: pca95550grp {
-		fsl,pins = <
-			MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12	0x78
-		>;
-	};
-
-	pinctrl_sai1: sai1grp {
-		fsl,pins = <
-			MX7D_PAD_SAI1_MCLK__SAI1_MCLK		0x11
-			MX7D_PAD_SAI1_RX_BCLK__SAI1_RX_BCLK	0x1c
-			MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0	0x1c
-			MX7D_PAD_SAI1_RX_SYNC__SAI2_RX_SYNC	0x1c
-
-			MX7D_PAD_SAI1_TX_BCLK__SAI1_TX_BCLK	0x1c
-			MX7D_PAD_SAI1_TX_DATA__SAI1_TX_DATA0	0x14
-			MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC	0x14
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX	0x7e
-			MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX	0x76
-			MX7D_PAD_UART3_CTS_B__UART3_DCE_CTS	0x76
-			MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS	0x7e
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX7D_PAD_SAI2_TX_SYNC__UART4_DCE_RX	0x7e
-			MX7D_PAD_SAI2_TX_BCLK__UART4_DCE_TX	0x76
-			MX7D_PAD_SAI2_RX_DATA__UART4_DCE_CTS	0x76
-			MX7D_PAD_SAI2_TX_DATA__UART4_DCE_RTS	0x7e
-		>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX7D_PAD_I2C4_SCL__UART5_DCE_RX		0x7e
-			MX7D_PAD_I2C4_SDA__UART5_DCE_TX		0x76
-		>;
-	};
-
-	pinctrl_uart6: uart6grp {
-		fsl,pins = <
-			MX7D_PAD_EPDC_DATA08__UART6_DCE_RX	0x7d
-			MX7D_PAD_EPDC_DATA09__UART6_DCE_TX	0x75
-			MX7D_PAD_EPDC_DATA11__UART6_DCE_CTS	0x75
-			MX7D_PAD_EPDC_DATA10__UART6_DCE_RTS	0x7d
-		>;
-	};
-
-	pinctrl_uart7: uart7grp {
-		fsl,pins = <
-			MX7D_PAD_EPDC_DATA12__UART7_DCE_RX	0x7e
-			MX7D_PAD_EPDC_DATA13__UART7_DCE_TX	0x76
-			MX7D_PAD_EPDC_DATA15__UART7_DCE_CTS	0x76
-			/* Limitation: RTS is not connected */
-			MX7D_PAD_EPDC_DATA14__UART7_DCE_RTS	0x7e
-		>;
-	};
-
-	pinctrl_usdhc1_gpio: usdhc1grp_gpio {
-		fsl,pins = <
-			/* WP */
-			MX7D_PAD_SD1_WP__GPIO5_IO1		0x7c
-			/* CD */
-			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x7c
-			/* VSELECT */
-			MX7D_PAD_GPIO1_IO08__SD1_VSELECT	0x59
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX7D_PAD_SD1_CMD__SD1_CMD		0x5e
-			MX7D_PAD_SD1_CLK__SD1_CLK		0x57
-			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5e
-			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5e
-			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5e
-			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5e
-		>;
-	};
-
-	pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
-		fsl,pins = <
-			MX7D_PAD_SD1_CMD__SD1_CMD		0x5a
-			MX7D_PAD_SD1_CLK__SD1_CLK		0x57
-			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5a
-			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5a
-			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5a
-			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5a
-		>;
-	};
-
-	pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
-		fsl,pins = <
-			MX7D_PAD_SD1_CMD__SD1_CMD		0x5b
-			MX7D_PAD_SD1_CLK__SD1_CLK		0x57
-			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5b
-			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5b
-			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5b
-			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5b
-		>;
-	};
-};
-
-&iomuxc_lpsr {
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			/* LCD_CONTRAST */
-			MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT	0x50
-		>;
-	};
-
-	pinctrl_usbotg1: usbotg1grp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC	0x5c
-			MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x59
-		>;
-	};
-
-	pinctrl_wdog1: wdog1grp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B	0x30
-		>;
-	};
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&sai1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sai1>;
-	assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>,
-			  <&clks IMX7D_SAI1_ROOT_CLK>;
-	assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
-	assigned-clock-rates = <0>, <36864000>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	assigned-clocks = <&clks IMX7D_UART4_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	assigned-clocks = <&clks IMX7D_UART5_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
-	status = "okay";
-};
-
-&uart6 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart6>;
-	assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
-	status = "okay";
-};
-
-&uart7 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart7>;
-	assigned-clocks = <&clks IMX7D_UART7_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
-	uart-has-rtscts;
-	linux,rs485-enabled-at-boot-time;
-	rs485-rts-active-low;
-	rs485-rx-during-tx;
-	status = "okay";
-};
-
-&usbh {
-	status = "okay";
-};
-
-&usbotg1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg1>;
-	vbus-supply = <&reg_usb_otg1_vbus>;
-	srp-disable;
-	hnp-disable;
-	adp-disable;
-	over-current-active-low;
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
-	pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>;
-	pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>;
-	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
-	vmmc-supply = <&reg_sd1_vmmc>;
-	bus-width = <4>;
-	no-1-8-v;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog1>;
-	fsl,ext-reset-output;
-};
diff --git a/arch/arm/boot/dts/imx7-tqma7.dtsi b/arch/arm/boot/dts/imx7-tqma7.dtsi
deleted file mode 100644
index 8773344b54aa..000000000000
--- a/arch/arm/boot/dts/imx7-tqma7.dtsi
+++ /dev/null
@@ -1,249 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Device Tree Include file for TQ Systems TQMa7x boards with full mounted PCB.
- *
- * Copyright (C) 2016 TQ Systems GmbH
- * Author: Markus Niebel <Markus.Niebel@tq-group.com>
- * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
- */
-
-/ {
-	memory@80000000 {
-		device_type = "memory";
-		/* 512 MB - default configuration */
-		reg = <0x80000000 0x20000000>;
-	};
-};
-
-&cpu0 {
-	cpu-supply = <&sw1a_reg>;
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	clock-frequency = <100000>;
-	status = "okay";
-
-	pfuze3000: pmic@8 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pmic1>;
-		compatible = "fsl,pfuze3000";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1a {
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			/* use sw1c_reg to align with pfuze100/pfuze200 */
-			sw1c_reg: sw1b {
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1475000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1850000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3 {
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1650000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vldo1 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen2_reg: vldo2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-always-on;
-			};
-
-			vgen3_reg: vccsd {
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen4_reg: v33 {
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vldo3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vldo4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-
-	/* NXP SE97BTP with temperature sensor + eeprom */
-	se97b: temperature-sensor-eeprom@1e {
-		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
-		reg = <0x1e>;
-		status = "okay";
-	};
-
-	/* ST M24C64 */
-	m24c64: eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-		pagesize = <32>;
-		status = "okay";
-	};
-
-	at24c02: eeprom@56 {
-		compatible = "atmel,24c02";
-		reg = <0x56>;
-		pagesize = <16>;
-		status = "okay";
-	};
-
-	ds1339: rtc@68 {
-		compatible = "dallas,ds1339";
-		reg = <0x68>;
-	};
-};
-
-&iomuxc {
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX7D_PAD_I2C1_SDA__I2C1_SDA	0x40000078
-			MX7D_PAD_I2C1_SCL__I2C1_SCL	0x40000078
-		>;
-	};
-
-	pinctrl_pmic1: pmic1grp {
-		fsl,pins = <
-			MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x4000005C
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
-			MX7D_PAD_SD3_CLK__SD3_CLK		0x56
-			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
-			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
-			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
-			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
-			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
-			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
-			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
-			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
-			MX7D_PAD_SD3_STROBE__SD3_STROBE		0x19
-		>;
-	};
-
-	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
-		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD               0x5a
-			MX7D_PAD_SD3_CLK__SD3_CLK               0x51
-			MX7D_PAD_SD3_DATA0__SD3_DATA0           0x5a
-			MX7D_PAD_SD3_DATA1__SD3_DATA1           0x5a
-			MX7D_PAD_SD3_DATA2__SD3_DATA2           0x5a
-			MX7D_PAD_SD3_DATA3__SD3_DATA3           0x5a
-			MX7D_PAD_SD3_DATA4__SD3_DATA4           0x5a
-			MX7D_PAD_SD3_DATA5__SD3_DATA5           0x5a
-			MX7D_PAD_SD3_DATA6__SD3_DATA6           0x5a
-			MX7D_PAD_SD3_DATA7__SD3_DATA7           0x5a
-			MX7D_PAD_SD3_STROBE__SD3_STROBE         0x1a
-		>;
-	};
-
-	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
-		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD               0x5b
-			MX7D_PAD_SD3_CLK__SD3_CLK               0x51
-			MX7D_PAD_SD3_DATA0__SD3_DATA0           0x5b
-			MX7D_PAD_SD3_DATA1__SD3_DATA1           0x5b
-			MX7D_PAD_SD3_DATA2__SD3_DATA2           0x5b
-			MX7D_PAD_SD3_DATA3__SD3_DATA3           0x5b
-			MX7D_PAD_SD3_DATA4__SD3_DATA4           0x5b
-			MX7D_PAD_SD3_DATA5__SD3_DATA5           0x5b
-			MX7D_PAD_SD3_DATA6__SD3_DATA6           0x5b
-			MX7D_PAD_SD3_DATA7__SD3_DATA7           0x5b
-			MX7D_PAD_SD3_STROBE__SD3_STROBE         0x1b
-		>;
-	};
-};
-
-&iomuxc_lpsr {
-	pinctrl_wdog1: wdog1grp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B	0x30
-		>;
-	};
-};
-
-&sdma {
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
-	assigned-clock-rates = <400000000>;
-	bus-width = <8>;
-	non-removable;
-	vmmc-supply = <&vgen4_reg>;
-	vqmmc-supply = <&sw2_reg>;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog1>;
-	/*
-	 * Errata e10574:
-	 * WDOG reset needs to run with WDOG_RESET_B signal enabled.
-	 * X1-51 (WDOG1#) signal needs carrier board handling to reset
-	 * TQMa7 on X1-22 (RESET_IN#).
-	 */
-	fsl,ext-reset-output;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx7d-colibri-aster.dts b/arch/arm/boot/dts/imx7d-colibri-aster.dts
deleted file mode 100644
index f3f0537d5a37..000000000000
--- a/arch/arm/boot/dts/imx7d-colibri-aster.dts
+++ /dev/null
@@ -1,20 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Copyright 2017-2020 Toradex AG
- *
- */
-
-/dts-v1/;
-#include "imx7d-colibri.dtsi"
-#include "imx7-colibri-aster.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX7D on Aster Carrier Board";
-	compatible = "toradex,colibri-imx7d-aster", "toradex,colibri-imx7d",
-		     "fsl,imx7d";
-};
-
-&usbotg2 {
-	vbus-supply = <&reg_usbh_vbus>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc-aster.dts b/arch/arm/boot/dts/imx7d-colibri-emmc-aster.dts
deleted file mode 100644
index 20480276cb0e..000000000000
--- a/arch/arm/boot/dts/imx7d-colibri-emmc-aster.dts
+++ /dev/null
@@ -1,20 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Copyright 2017-2020 Toradex AG
- *
- */
-
-/dts-v1/;
-#include "imx7d-colibri-emmc.dtsi"
-#include "imx7-colibri-aster.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX7D 1GB (eMMC) on Aster Carrier Board";
-	compatible = "toradex,colibri-imx7d-emmc-aster",
-		     "toradex,colibri-imx7d-emmc", "fsl,imx7d";
-};
-
-&usbotg2 {
-	vbus-supply = <&reg_usbh_vbus>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc-eval-v3.dts b/arch/arm/boot/dts/imx7d-colibri-emmc-eval-v3.dts
deleted file mode 100644
index 8ee73c870b12..000000000000
--- a/arch/arm/boot/dts/imx7d-colibri-emmc-eval-v3.dts
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Copyright 2017 Toradex AG
- */
-
-/dts-v1/;
-#include "imx7d-colibri-emmc.dtsi"
-#include "imx7-colibri-eval-v3.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX7D 1GB (eMMC) on Colibri Evaluation Board V3";
-	compatible = "toradex,colibri-imx7d-emmc-eval-v3",
-		     "toradex,colibri-imx7d-emmc", "fsl,imx7d";
-};
-
-&usbotg2 {
-	vbus-supply = <&reg_usbh_vbus>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi b/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi
deleted file mode 100644
index af39e5370fa1..000000000000
--- a/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi
+++ /dev/null
@@ -1,48 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Copyright 2017 Toradex AG
- */
-
-#include "imx7d.dtsi"
-#include "imx7-colibri.dtsi"
-
-/ {
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>;
-	};
-};
-
-&gpio6 {
-	gpio-line-names = "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "SODIMM_169",
-			  "SODIMM_157",
-			  "",
-			  "SODIMM_163",
-			  "SODIMM_77",
-			  "SODIMM_24",
-			  "",
-			  "SODIMM_25",
-			  "SODIMM_27",
-			  "SODIMM_32",
-			  "SODIMM_34";
-};
-
-&usbotg2 {
-	dr_mode = "host";
-};
-
-&usdhc3 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts b/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts
deleted file mode 100644
index 87b132bcd272..000000000000
--- a/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-/*
- * Copyright 2016-2020 Toradex
- */
-
-/dts-v1/;
-#include "imx7d-colibri.dtsi"
-#include "imx7-colibri-eval-v3.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX7D on Colibri Evaluation Board V3";
-	compatible = "toradex,colibri-imx7d-eval-v3", "toradex,colibri-imx7d",
-		     "fsl,imx7d";
-};
-
-&usbotg2 {
-	vbus-supply = <&reg_usbh_vbus>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx7d-colibri.dtsi b/arch/arm/boot/dts/imx7d-colibri.dtsi
deleted file mode 100644
index 219a0404a058..000000000000
--- a/arch/arm/boot/dts/imx7d-colibri.dtsi
+++ /dev/null
@@ -1,26 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-/*
- * Copyright 2016-2020 Toradex
- */
-
-#include "imx7d.dtsi"
-#include "imx7-colibri.dtsi"
-
-/ {
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>;
-	};
-};
-
-&cpu1 {
-	cpu-supply = <&reg_DCDC2>;
-};
-
-&gpmi {
-	status = "okay";
-};
-
-&usbotg2 {
-	dr_mode = "host";
-};
diff --git a/arch/arm/boot/dts/imx7d-mba7.dts b/arch/arm/boot/dts/imx7d-mba7.dts
deleted file mode 100644
index 36ef6a3cdb0b..000000000000
--- a/arch/arm/boot/dts/imx7d-mba7.dts
+++ /dev/null
@@ -1,113 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Device Tree Source for TQ Systems TQMa7D board on MBa7 carrier board.
- *
- * Copyright (C) 2016 TQ Systems GmbH
- * Author: Markus Niebel <Markus.Niebel@tq-group.com>
- * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
- */
-
-/dts-v1/;
-
-#include "imx7d-tqma7.dtsi"
-#include "imx7-mba7.dtsi"
-
-/ {
-	model = "TQ Systems TQMa7D board on MBa7 carrier board";
-	compatible = "tq,imx7d-mba7", "tq,imx7d-tqma7", "fsl,imx7d";
-};
-
-&fec2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet2>;
-	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <1>;
-	phy-supply = <&reg_fec2_pwdn>;
-	phy-handle = <&ethphy2_0>;
-	fsl,magic-packet;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy2_0: ethernet-phy@0 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <0>;
-			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
-			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
-			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
-			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
-		};
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog_mba7_1>;
-
-	pinctrl_enet2: enet2grp {
-		fsl,pins = <
-			MX7D_PAD_SD2_CD_B__ENET2_MDIO			0x02
-			MX7D_PAD_SD2_WP__ENET2_MDC			0x00
-			MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC		0x71
-			MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0		0x71
-			MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1		0x71
-			MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2		0x71
-			MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3		0x71
-			MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL		0x71
-			MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC		0x79
-			MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0		0x79
-			MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1		0x79
-			MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2		0x79
-			MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3		0x79
-			MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL		0x79
-			/* Reset: SION, 100kPU, SRE_FAST, DSE_X1 */
-			MX7D_PAD_EPDC_BDR0__GPIO2_IO28		0x40000070
-			/* INT/PWDN: SION, 100kPU, HYS, SRE_FAST, DSE_X1 */
-			MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31	0x40000078
-		>;
-	};
-
-	pinctrl_pcie: pciegrp {
-		fsl,pins = <
-			/* #pcie_wake */
-			MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30		0x70
-			/* #pcie_rst */
-			MX7D_PAD_SD2_CLK__GPIO5_IO12			0x70
-			/* #pcie_dis */
-			MX7D_PAD_EPDC_BDR1__GPIO2_IO29			0x70
-		>;
-	};
-};
-
-&iomuxc_lpsr {
-	pinctrl_usbotg2: usbotg2grp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO06__USB_OTG2_OC	0x5c
-			MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7	0x59
-		>;
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	/* 1.5V logically from 3.3V */
-	/* probe deferral not supported */
-	/* pcie-bus-supply = <&reg_mpcie_1v5>; */
-	reset-gpio = <&gpio5 12 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&usbotg2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg2>;
-	vbus-supply = <&reg_usb_otg2_vbus>;
-	srp-disable;
-	hnp-disable;
-	adp-disable;
-	dr_mode = "host";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts
deleted file mode 100644
index 89cbf13097a4..000000000000
--- a/arch/arm/boot/dts/imx7d-remarkable2.dts
+++ /dev/null
@@ -1,237 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2015 Freescale Semiconductor, Inc.
- * Copyright (C) 2019 reMarkable AS - http://www.remarkable.com/
- *
- */
-
-/dts-v1/;
-
-#include "imx7d.dtsi"
-
-/ {
-	model = "reMarkable 2.0";
-	compatible = "remarkable,imx7d-remarkable2", "fsl,imx7d";
-
-	chosen {
-		stdout-path = &uart6;
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>;
-	};
-
-	reg_brcm: regulator-brcm {
-		compatible = "regulator-fixed";
-		regulator-name = "brcm_reg";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_brcm_reg>;
-		gpio = <&gpio6 13 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		startup-delay-us = <150>;
-	};
-
-	wifi_pwrseq: wifi_pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_wifi>;
-		reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
-		clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
-		clock-names = "ext_clock";
-	};
-};
-
-&clks {
-	assigned-clocks = <&clks IMX7D_CLKO2_ROOT_SRC>,
-			  <&clks IMX7D_CLKO2_ROOT_DIV>;
-	assigned-clock-parents = <&clks IMX7D_CKIL>;
-	assigned-clock-rates = <0>, <32768>;
-};
-
-&snvs_pwrkey {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
-	status = "okay";
-};
-
-&uart6 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart6>;
-	assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
-	status = "okay";
-};
-
-&usbotg2 {
-	srp-disable;
-	hnp-disable;
-	status = "okay";
-};
-
-&usdhc2 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
-	mmc-pwrseq = <&wifi_pwrseq>;
-	vmmc-supply = <&reg_brcm>;
-	bus-width = <4>;
-	non-removable;
-	keep-power-in-suspend;
-	cap-power-off-card;
-	status = "okay";
-
-	brcmf: bcrmf@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-	};
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	pinctrl-3 = <&pinctrl_usdhc3>;
-	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
-	assigned-clock-rates = <400000000>;
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-};
-
-&iomuxc {
-	pinctrl_brcm_reg: brcmreggrp {
-		fsl,pins = <
-			/* WIFI_PWR_EN */
-			MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13	0x14
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
-			MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x79
-		>;
-	};
-
-	pinctrl_uart6: uart6grp {
-		fsl,pins = <
-			MX7D_PAD_EPDC_DATA09__UART6_DCE_TX		0x79
-			MX7D_PAD_EPDC_DATA08__UART6_DCE_RX		0x79
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX7D_PAD_SD2_CMD__SD2_CMD		0x59
-			MX7D_PAD_SD2_CLK__SD2_CLK		0x19
-			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x59
-			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x59
-			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x59
-			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x59
-		>;
-	};
-
-	pinctrl_usdhc2_100mhz: usdhc2grp_100mhz {
-		fsl,pins = <
-			MX7D_PAD_SD2_CMD__SD2_CMD		0x5a
-			MX7D_PAD_SD2_CLK__SD2_CLK		0x1a
-			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x5a
-			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x5a
-			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x5a
-			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x5a
-		>;
-	};
-
-	pinctrl_usdhc2_200mhz: usdhc2grp_200mhz {
-		fsl,pins = <
-			MX7D_PAD_SD2_CMD__SD2_CMD		0x5b
-			MX7D_PAD_SD2_CLK__SD2_CLK		0x1b
-			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x5b
-			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x5b
-			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x5b
-			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x5b
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
-			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
-			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
-			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
-			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
-			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
-			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
-			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
-			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
-			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
-			MX7D_PAD_SD3_STROBE__SD3_STROBE		0x19
-		>;
-	};
-
-	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
-		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
-			MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
-			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5a
-			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5a
-			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5a
-			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5a
-			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5a
-			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5a
-			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5a
-			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5a
-			MX7D_PAD_SD3_STROBE__SD3_STROBE		0x1a
-		>;
-	};
-
-	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
-		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
-			MX7D_PAD_SD3_CLK__SD3_CLK		0x1b
-			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5b
-			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5b
-			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5b
-			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5b
-			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5b
-			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5b
-			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5b
-			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5b
-			MX7D_PAD_SD3_STROBE__SD3_STROBE		0x1b
-		>;
-	};
-
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX7D_PAD_ENET1_COL__WDOG1_WDOG_ANY	0x74
-		>;
-	};
-
-	pinctrl_wifi: wifigrp {
-		fsl,pins = <
-			/* WiFi Reg On */
-			MX7D_PAD_SD2_CD_B__GPIO5_IO9		0x00000014
-			/* WiFi Sleep 32k */
-			MX7D_PAD_SD1_WP__CCM_CLKO2		0x00000014
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx7d-sdb-reva.dts b/arch/arm/boot/dts/imx7d-sdb-reva.dts
deleted file mode 100644
index cabdaa6dc518..000000000000
--- a/arch/arm/boot/dts/imx7d-sdb-reva.dts
+++ /dev/null
@@ -1,43 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-//
-// Copyright (C) 2015 Freescale Semiconductor, Inc.
-
-/dts-v1/;
-
-#include "imx7d-sdb.dts"
-
-/ {
-	model = "Freescale i.MX7 SabreSD RevA Board";
-	compatible = "fsl,imx7d-sdb-reva", "fsl,imx7d";
-
-	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
-		pinctrl-0 = <&pinctrl_usb_otg2_vbus_reg_reva>;
-		gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&fec2 {
-	/delete-property/phy-supply;
-};
-
-&iomuxc {
-	imx7d-sdb {
-		pinctrl_tsc2046_pendown: tsc2046_pendown {
-			fsl,pins = <
-				MX7D_PAD_EPDC_DATA13__GPIO2_IO13	0x59
-			>;
-		};
-
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX7D_PAD_ECSPI2_SS0__GPIO4_IO23		0x34  /* bt reg on */
-			>;
-		};
-
-		pinctrl_usb_otg2_vbus_reg_reva: usbotg2vbusregrevagrp {
-			fsl,pins = <
-				MX7D_PAD_UART3_CTS_B__GPIO4_IO7		0x14
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
deleted file mode 100644
index 4a0d83784d7d..000000000000
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ /dev/null
@@ -1,867 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-//
-// Copyright (C) 2015 Freescale Semiconductor, Inc.
-
-/dts-v1/;
-
-#include "imx7d.dtsi"
-
-/ {
-	model = "Freescale i.MX7 SabreSD Board";
-	compatible = "fsl,imx7d-sdb", "fsl,imx7d";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x80000000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-			wakeup-source;
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-			wakeup-source;
-		};
-	};
-
-	spi4 {
-		compatible = "spi-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_spi4>;
-		gpio-sck = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-		gpio-mosi = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		cs-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-		num-chipselects = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		extended_io: gpio-expander@0 {
-			compatible = "fairchild,74hc595";
-			gpio-controller;
-			#gpio-cells = <2>;
-			reg = <0>;
-			registers-number = <1>;
-			spi-max-frequency = <100000>;
-		};
-	};
-
-	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg2_vbus";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb_otg2_vbus_reg>;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_vref_1v8: regulator-vref-1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "vref-1v8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	reg_brcm: regulator-brcm {
-		compatible = "regulator-fixed";
-		gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-name = "brcm_reg";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_brcm_reg>;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <200000>;
-	};
-
-	reg_lcd_3v3: regulator-lcd-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&extended_io 7 GPIO_ACTIVE_LOW>;
-	};
-
-	reg_can2_3v3: regulator-can2-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "can2-3v3";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_flexcan2_reg>;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 14 GPIO_ACTIVE_LOW>;
-	};
-
-	reg_fec2_3v3: regulator-fec2-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "fec2-3v3";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_enet2_reg>;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000 0>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-		status = "okay";
-	};
-
-	panel {
-		compatible = "innolux,at043tn24";
-		backlight = <&backlight>;
-		power-supply = <&reg_lcd_3v3>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&display_out>;
-			};
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx7d-evk-wm8960",
-			     "fsl,imx-audio-wm8960";
-		model = "wm8960-audio";
-		audio-cpu = <&sai1>;
-		audio-codec = <&codec>;
-		hp-det-gpio = <&gpio2 28 GPIO_ACTIVE_HIGH>;
-		audio-routing =
-			"Headphone Jack", "HP_L",
-			"Headphone Jack", "HP_R",
-			"Ext Spk", "SPK_LP",
-			"Ext Spk", "SPK_LN",
-			"Ext Spk", "SPK_RP",
-			"Ext Spk", "SPK_RN",
-			"LINPUT1", "AMIC",
-			"AMIC", "MICB";
-	};
-
-	sound-hdmi {
-		compatible = "fsl,imx-audio-sii902x";
-		model = "sii902x-audio";
-		audio-cpu = <&sai3>;
-		hdmi-out;
-	};
-};
-
-&adc1 {
-	vref-supply = <&reg_vref_1v8>;
-	status = "okay";
-};
-
-&adc2 {
-	vref-supply = <&reg_vref_1v8>;
-	status = "okay";
-};
-
-&cpu0 {
-	cpu-supply = <&sw1a_reg>;
-};
-
-&cpu1 {
-	cpu-supply = <&sw1a_reg>;
-};
-
-&ecspi3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi3>;
-	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	tsc2046@0 {
-		compatible = "ti,tsc2046";
-		reg = <0>;
-		spi-max-frequency = <1000000>;
-		pinctrl-names ="default";
-		pinctrl-0 = <&pinctrl_tsc2046_pendown>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <29 0>;
-		pendown-gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>;
-		ti,x-min = /bits/ 16 <0>;
-		ti,x-max = /bits/ 16 <0>;
-		ti,y-min = /bits/ 16 <0>;
-		ti,y-max = /bits/ 16 <0>;
-		ti,pressure-max = /bits/ 16 <0>;
-		ti,x-plate-ohms = /bits/ 16 <400>;
-		wakeup-source;
-	};
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1>;
-	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
-			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
-	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
-	assigned-clock-rates = <0>, <100000000>;
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy0>;
-	fsl,magic-packet;
-	phy-reset-gpios = <&extended_io 5 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy0: ethernet-phy@0 {
-			reg = <0>;
-		};
-
-		ethphy1: ethernet-phy@1 {
-			reg = <1>;
-		};
-	};
-};
-
-&fec2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet2>;
-	assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>,
-			  <&clks IMX7D_ENET2_TIME_ROOT_CLK>;
-	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
-	assigned-clock-rates = <0>, <100000000>;
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy1>;
-	phy-supply = <&reg_fec2_3v3>;
-	fsl,magic-packet;
-	status = "okay";
-};
-
-&flexcan2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	xceiver-supply = <&reg_can2_3v3>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pmic: pfuze3000@8 {
-		compatible = "fsl,pfuze3000";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1a {
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1475000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			/* use sw1c_reg to align with pfuze100/pfuze200 */
-			sw1c_reg: sw1b {
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1475000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3 {
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1650000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vldo1 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen2_reg: vldo2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen3_reg: vccsd {
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen4_reg: v33 {
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vldo3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vldo4 {
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	mpl3115@60 {
-		compatible = "fsl,mpl3115";
-		reg = <0x60>;
-	};
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&i2c4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c4>;
-	status = "okay";
-
-	codec: wm8960@1a {
-		compatible = "wlf,wm8960";
-		reg = <0x1a>;
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
-		clock-names = "mclk";
-		wlf,shared-lrclk;
-		wlf,hp-cfg = <2 2 3>;
-		wlf,gpio-cfg = <1 3>;
-		assigned-clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_SRC>,
-				  <&clks IMX7D_PLL_AUDIO_POST_DIV>,
-				  <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
-		assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
-		assigned-clock-rates = <0>, <884736000>, <12288000>;
-	};
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lcdif>;
-	status = "okay";
-
-	port {
-		display_out: endpoint {
-			remote-endpoint = <&panel_in>;
-		};
-	};
-};
-
-&pcie {
-	reset-gpio = <&extended_io 1 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&reg_1p0d {
-	vin-supply = <&sw2_reg>;
-};
-
-&reg_1p2 {
-	vin-supply = <&sw2_reg>;
-};
-
-&sai1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sai1>;
-	assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>,
-			  <&clks IMX7D_PLL_AUDIO_POST_DIV>,
-			  <&clks IMX7D_SAI1_ROOT_CLK>;
-	assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
-	assigned-clock-rates = <0>, <884736000>, <36864000>;
-	status = "okay";
-};
-
-&sai3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sai3 &pinctrl_sai3_mclk>;
-	assigned-clocks = <&clks IMX7D_SAI3_ROOT_SRC>,
-			  <&clks IMX7D_PLL_AUDIO_POST_DIV>,
-			  <&clks IMX7D_SAI3_ROOT_CLK>;
-	assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
-	assigned-clock-rates = <0>, <884736000>, <36864000>;
-	status = "okay";
-};
-
-&snvs_pwrkey {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
-	status = "okay";
-};
-
-&uart6 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart6>;
-	assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
-	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbotg1 {
-	vbus-supply = <&reg_usb_otg1_vbus>;
-	status = "okay";
-};
-
-&usbotg2 {
-	vbus-supply = <&reg_usb_otg2_vbus>;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
-	wakeup-source;
-	keep-power-in-suspend;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
-	wakeup-source;
-	keep-power-in-suspend;
-	non-removable;
-	vmmc-supply = <&reg_brcm>;
-	fsl,tuning-step = <2>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
-	assigned-clock-rates = <400000000>;
-	bus-width = <8>;
-	fsl,tuning-step = <2>;
-	non-removable;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx7d-sdb {
-		pinctrl_brcm_reg: brcmreggrp {
-			fsl,pins = <
-				MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21	0x14
-			>;
-		};
-
-		pinctrl_ecspi3: ecspi3grp {
-			fsl,pins = <
-				MX7D_PAD_SAI2_TX_SYNC__ECSPI3_MISO	0x2
-				MX7D_PAD_SAI2_TX_BCLK__ECSPI3_MOSI	0x2
-				MX7D_PAD_SAI2_RX_DATA__ECSPI3_SCLK	0x2
-				MX7D_PAD_SD2_CD_B__GPIO5_IO9		0x59
-			>;
-		};
-
-		pinctrl_enet1: enet1grp {
-			fsl,pins = <
-				MX7D_PAD_GPIO1_IO10__ENET1_MDIO			0x3
-				MX7D_PAD_GPIO1_IO11__ENET1_MDC			0x3
-				MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC	0x1
-				MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x1
-				MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x1
-				MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2	0x1
-				MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3	0x1
-				MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x1
-				MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC	0x1
-				MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x1
-				MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x1
-				MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x1
-				MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x1
-				MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x1
-			>;
-		};
-
-		pinctrl_enet2: enet2grp {
-			fsl,pins = <
-				MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC		0x1
-				MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0		0x1
-				MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1		0x1
-				MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2		0x1
-				MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3		0x1
-				MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL		0x1
-				MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC		0x1
-				MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0		0x1
-				MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1		0x1
-				MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2		0x1
-				MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3		0x1
-				MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL		0x1
-			>;
-		};
-
-		pinctrl_enet2_reg: enet2reggrp {
-			fsl,pins = <
-				MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4	0x14
-			>;
-		};
-
-		pinctrl_flexcan2: flexcan2grp {
-			fsl,pins = <
-				MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX	0x59
-				MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX	0x59
-			>;
-		};
-
-		pinctrl_flexcan2_reg: flexcan2reggrp {
-			fsl,pins = <
-				MX7D_PAD_EPDC_DATA14__GPIO2_IO14	0x59	/* CAN_STBY */
-			>;
-		};
-
-		pinctrl_gpio_keys: gpio_keysgrp {
-			fsl,pins = <
-				MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x59
-				MX7D_PAD_SD2_WP__GPIO5_IO10		0x59
-			>;
-		};
-
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX7D_PAD_ECSPI2_SS0__GPIO4_IO23		0x34  /* bt reg on */
-				MX7D_PAD_EPDC_BDR0__GPIO2_IO28		0x59  /* headphone detect */
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
-				MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX7D_PAD_I2C2_SDA__I2C2_SDA		0x4000007f
-				MX7D_PAD_I2C2_SCL__I2C2_SCL		0x4000007f
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX7D_PAD_I2C3_SDA__I2C3_SDA		0x4000007f
-				MX7D_PAD_I2C3_SCL__I2C3_SCL		0x4000007f
-			>;
-		};
-
-		pinctrl_i2c4: i2c4grp {
-			fsl,pins = <
-				MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA		0x4000007f
-				MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL		0x4000007f
-			>;
-		};
-
-		pinctrl_lcdif: lcdifgrp {
-			fsl,pins = <
-				MX7D_PAD_LCD_DATA00__LCD_DATA0		0x79
-				MX7D_PAD_LCD_DATA01__LCD_DATA1		0x79
-				MX7D_PAD_LCD_DATA02__LCD_DATA2		0x79
-				MX7D_PAD_LCD_DATA03__LCD_DATA3		0x79
-				MX7D_PAD_LCD_DATA04__LCD_DATA4		0x79
-				MX7D_PAD_LCD_DATA05__LCD_DATA5		0x79
-				MX7D_PAD_LCD_DATA06__LCD_DATA6		0x79
-				MX7D_PAD_LCD_DATA07__LCD_DATA7		0x79
-				MX7D_PAD_LCD_DATA08__LCD_DATA8		0x79
-				MX7D_PAD_LCD_DATA09__LCD_DATA9		0x79
-				MX7D_PAD_LCD_DATA10__LCD_DATA10		0x79
-				MX7D_PAD_LCD_DATA11__LCD_DATA11		0x79
-				MX7D_PAD_LCD_DATA12__LCD_DATA12		0x79
-				MX7D_PAD_LCD_DATA13__LCD_DATA13		0x79
-				MX7D_PAD_LCD_DATA14__LCD_DATA14		0x79
-				MX7D_PAD_LCD_DATA15__LCD_DATA15		0x79
-				MX7D_PAD_LCD_DATA16__LCD_DATA16		0x79
-				MX7D_PAD_LCD_DATA17__LCD_DATA17		0x79
-				MX7D_PAD_LCD_DATA18__LCD_DATA18		0x79
-				MX7D_PAD_LCD_DATA19__LCD_DATA19		0x79
-				MX7D_PAD_LCD_DATA20__LCD_DATA20		0x79
-				MX7D_PAD_LCD_DATA21__LCD_DATA21		0x79
-				MX7D_PAD_LCD_DATA22__LCD_DATA22		0x79
-				MX7D_PAD_LCD_DATA23__LCD_DATA23		0x79
-				MX7D_PAD_LCD_CLK__LCD_CLK		0x79
-				MX7D_PAD_LCD_ENABLE__LCD_ENABLE		0x79
-				MX7D_PAD_LCD_VSYNC__LCD_VSYNC		0x79
-				MX7D_PAD_LCD_HSYNC__LCD_HSYNC		0x79
-				MX7D_PAD_LCD_RESET__LCD_RESET		0x79
-			>;
-		};
-
-		pinctrl_sai1: sai1grp {
-			fsl,pins = <
-				MX7D_PAD_SAI1_MCLK__SAI1_MCLK           0x1f
-				MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK     0x1f
-				MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC	0x1f
-				MX7D_PAD_ENET1_COL__SAI1_TX_DATA0	0x30
-				MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0	0x1f
-			>;
-		};
-
-		pinctrl_sai2: sai2grp {
-			fsl,pins = <
-				MX7D_PAD_SAI2_TX_BCLK__SAI2_TX_BCLK     0x1f
-				MX7D_PAD_SAI2_TX_SYNC__SAI2_TX_SYNC     0x1f
-				MX7D_PAD_SAI2_TX_DATA__SAI2_TX_DATA0    0x30
-				MX7D_PAD_SAI2_RX_DATA__SAI2_RX_DATA0    0x1f
-			>;
-		};
-
-		pinctrl_sai3: sai3grp {
-			fsl,pins = <
-				MX7D_PAD_UART3_TX_DATA__SAI3_TX_BCLK   0x1f
-				MX7D_PAD_UART3_CTS_B__SAI3_TX_SYNC     0x1f
-				MX7D_PAD_UART3_RTS_B__SAI3_TX_DATA0    0x30
-			>;
-		};
-
-		pinctrl_spi4: spi4grp {
-			fsl,pins = <
-				MX7D_PAD_GPIO1_IO09__GPIO1_IO9	0x59
-				MX7D_PAD_GPIO1_IO12__GPIO1_IO12	0x59
-				MX7D_PAD_GPIO1_IO13__GPIO1_IO13	0x59
-			>;
-		};
-
-		pinctrl_tsc2046_pendown: tsc2046_pendown {
-			fsl,pins = <
-				MX7D_PAD_EPDC_BDR1__GPIO2_IO29		0x59
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
-				MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x79
-			>;
-		};
-
-		pinctrl_uart5: uart5grp {
-			fsl,pins = <
-				MX7D_PAD_SAI1_TX_BCLK__UART5_DCE_TX	0x79
-				MX7D_PAD_SAI1_RX_DATA__UART5_DCE_RX	0x79
-				MX7D_PAD_SAI1_TX_SYNC__UART5_DCE_CTS	0x79
-				MX7D_PAD_SAI1_TX_DATA__UART5_DCE_RTS	0x79
-			>;
-		};
-
-		pinctrl_uart6: uart6grp {
-			fsl,pins = <
-				MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX	0x79
-				MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX	0x79
-				MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS	0x79
-				MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS	0x79
-			>;
-		};
-
-		pinctrl_usdhc1: usdhc1grp {
-			fsl,pins = <
-				MX7D_PAD_SD1_CMD__SD1_CMD		0x59
-				MX7D_PAD_SD1_CLK__SD1_CLK		0x19
-				MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
-				MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
-				MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
-				MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
-				MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x59 /* CD */
-				MX7D_PAD_SD1_WP__GPIO5_IO1		0x59 /* WP */
-				MX7D_PAD_SD1_RESET_B__GPIO5_IO2		0x59 /* vmmc */
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX7D_PAD_SD2_CMD__SD2_CMD		0x59
-				MX7D_PAD_SD2_CLK__SD2_CLK		0x19
-				MX7D_PAD_SD2_DATA0__SD2_DATA0		0x59
-				MX7D_PAD_SD2_DATA1__SD2_DATA1		0x59
-				MX7D_PAD_SD2_DATA2__SD2_DATA2		0x59
-				MX7D_PAD_SD2_DATA3__SD2_DATA3		0x59
-			>;
-		};
-
-		pinctrl_usdhc2_100mhz: usdhc2grp_100mhz {
-			fsl,pins = <
-				MX7D_PAD_SD2_CMD__SD2_CMD		0x5a
-				MX7D_PAD_SD2_CLK__SD2_CLK		0x1a
-				MX7D_PAD_SD2_DATA0__SD2_DATA0		0x5a
-				MX7D_PAD_SD2_DATA1__SD2_DATA1		0x5a
-				MX7D_PAD_SD2_DATA2__SD2_DATA2		0x5a
-				MX7D_PAD_SD2_DATA3__SD2_DATA3		0x5a
-			>;
-		};
-
-		pinctrl_usdhc2_200mhz: usdhc2grp_200mhz {
-			fsl,pins = <
-				MX7D_PAD_SD2_CMD__SD2_CMD		0x5b
-				MX7D_PAD_SD2_CLK__SD2_CLK		0x1b
-				MX7D_PAD_SD2_DATA0__SD2_DATA0		0x5b
-				MX7D_PAD_SD2_DATA1__SD2_DATA1		0x5b
-				MX7D_PAD_SD2_DATA2__SD2_DATA2		0x5b
-				MX7D_PAD_SD2_DATA3__SD2_DATA3		0x5b
-			>;
-		};
-
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX7D_PAD_SD3_CMD__SD3_CMD		0x59
-				MX7D_PAD_SD3_CLK__SD3_CLK		0x19
-				MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
-				MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
-				MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
-				MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
-				MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
-				MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
-				MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
-				MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
-				MX7D_PAD_SD3_STROBE__SD3_STROBE		0x19
-			>;
-		};
-
-		pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
-			fsl,pins = <
-				MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
-				MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
-				MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5a
-				MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5a
-				MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5a
-				MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5a
-				MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5a
-				MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5a
-				MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5a
-				MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5a
-				MX7D_PAD_SD3_STROBE__SD3_STROBE		0x1a
-			>;
-		};
-
-		pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
-			fsl,pins = <
-				MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
-				MX7D_PAD_SD3_CLK__SD3_CLK		0x1b
-				MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5b
-				MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5b
-				MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5b
-				MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5b
-				MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5b
-				MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5b
-				MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5b
-				MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5b
-				MX7D_PAD_SD3_STROBE__SD3_STROBE		0x1b
-			>;
-		};
-	};
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&iomuxc_lpsr {
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B		0x74
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT		0x30
-		>;
-	};
-
-	pinctrl_usb_otg2_vbus_reg: usbotg2vbusreggrp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7	  0x14
-		>;
-	};
-
-	pinctrl_sai3_mclk: sai3grp_mclk {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO03__SAI3_MCLK	0x1f
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx7d-tqma7.dtsi b/arch/arm/boot/dts/imx7d-tqma7.dtsi
deleted file mode 100644
index 598aed1ffd99..000000000000
--- a/arch/arm/boot/dts/imx7d-tqma7.dtsi
+++ /dev/null
@@ -1,15 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Device Tree Include file for TQ Systems TQMa7D board with NXP i.MX7Dual SoC.
- *
- * Copyright (C) 2016 TQ Systems GmbH
- * Author: Markus Niebel <Markus.Niebel@tq-group.com>
- * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
- */
-
-#include "imx7d.dtsi"
-#include "imx7-tqma7.dtsi"
-
-&cpu1 {
-	cpu-supply = <&sw1a_reg>;
-};
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
deleted file mode 100644
index b0bcfa9094a3..000000000000
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ /dev/null
@@ -1,221 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-//
-// Copyright 2015 Freescale Semiconductor, Inc.
-// Copyright 2016 Toradex AG
-
-#include "imx7s.dtsi"
-#include <dt-bindings/reset/imx7-reset.h>
-
-/ {
-	aliases {
-		usb0 = &usbotg1;
-		usb1 = &usbotg2;
-		usb2 = &usbh;
-	};
-
-	cpus {
-		cpu0: cpu@0 {
-			clock-frequency = <996000000>;
-			operating-points-v2 = <&cpu0_opp_table>;
-			#cooling-cells = <2>;
-			nvmem-cells = <&fuse_grade>;
-			nvmem-cell-names = "speed_grade";
-		};
-
-		cpu1: cpu@1 {
-			compatible = "arm,cortex-a7";
-			device_type = "cpu";
-			reg = <1>;
-			clock-frequency = <996000000>;
-			operating-points-v2 = <&cpu0_opp_table>;
-			#cooling-cells = <2>;
-			cpu-idle-states = <&cpu_sleep_wait>;
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupt-parent = <&intc>;
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	cpu0_opp_table: opp-table {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-792000000 {
-			opp-hz = /bits/ 64 <792000000>;
-			opp-microvolt = <1000000>;
-			clock-latency-ns = <150000>;
-			opp-supported-hw = <0xd>, <0x7>;
-			opp-suspend;
-		};
-
-		opp-996000000 {
-			opp-hz = /bits/ 64 <996000000>;
-			opp-microvolt = <1100000>;
-			clock-latency-ns = <150000>;
-			opp-supported-hw = <0xc>, <0x7>;
-			opp-suspend;
-		};
-
-		opp-1200000000 {
-			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <1225000>;
-			clock-latency-ns = <150000>;
-			opp-supported-hw = <0x8>, <0x3>;
-			opp-suspend;
-		};
-	};
-
-	usbphynop2: usbphynop2 {
-		compatible = "usb-nop-xceiv";
-		clocks = <&clks IMX7D_USB_PHY2_CLK>;
-		clock-names = "main_clk";
-		#phy-cells = <0>;
-	};
-
-	soc {
-		etm@3007d000 {
-			compatible = "arm,coresight-etm3x", "arm,primecell";
-			reg = <0x3007d000 0x1000>;
-
-			/*
-			 * System will hang if added nosmp in kernel command line
-			 * without arm,primecell-periphid because amba bus try to
-			 * read id and core1 power off at this time.
-			 */
-			arm,primecell-periphid = <0xbb956>;
-			cpu = <&cpu1>;
-			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-			clock-names = "apb_pclk";
-
-			out-ports {
-				port {
-					etm1_out_port: endpoint {
-						remote-endpoint = <&ca_funnel_in_port1>;
-					};
-				};
-			};
-		};
-
-		intc: interrupt-controller@31001000 {
-			compatible = "arm,cortex-a7-gic";
-			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			interrupt-parent = <&intc>;
-			reg = <0x31001000 0x1000>,
-			      <0x31002000 0x2000>,
-			      <0x31004000 0x2000>,
-			      <0x31006000 0x2000>;
-		};
-	};
-};
-
-&aips2 {
-	pcie_phy: pcie-phy@306d0000 {
-		  compatible = "fsl,imx7d-pcie-phy";
-		  reg = <0x306d0000 0x10000>;
-		  status = "disabled";
-	};
-};
-
-&aips3 {
-	usbotg2: usb@30b20000 {
-		compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
-		reg = <0x30b20000 0x200>;
-		interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clks IMX7D_USB_CTRL_CLK>;
-		fsl,usbphy = <&usbphynop2>;
-		fsl,usbmisc = <&usbmisc2 0>;
-		phy-clkgate-delay-us = <400>;
-		status = "disabled";
-	};
-
-	usbmisc2: usbmisc@30b20200 {
-		#index-cells = <1>;
-		compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
-		reg = <0x30b20200 0x200>;
-	};
-
-	fec2: ethernet@30bf0000 {
-		compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
-		reg = <0x30bf0000 0x10000>;
-		interrupt-names = "int0", "int1", "int2", "pps";
-		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clks IMX7D_ENET2_IPG_ROOT_CLK>,
-			<&clks IMX7D_ENET_AXI_ROOT_CLK>,
-			<&clks IMX7D_ENET2_TIME_ROOT_CLK>,
-			<&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
-			<&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
-		clock-names = "ipg", "ahb", "ptp",
-			"enet_clk_ref", "enet_out";
-		fsl,num-tx-queues = <3>;
-		fsl,num-rx-queues = <3>;
-		fsl,stop-mode = <&gpr 0x10 4>;
-		status = "disabled";
-	};
-
-	pcie: pcie@33800000 {
-		compatible = "fsl,imx7d-pcie", "snps,dw-pcie";
-		reg = <0x33800000 0x4000>,
-		      <0x4ff00000 0x80000>;
-		reg-names = "dbi", "config";
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		bus-range = <0x00 0xff>;
-		ranges = <0x81000000 0 0          0x4ff80000 0 0x00010000   /* downstream I/O */
-			  0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>; /* non-prefetchable memory */
-		num-lanes = <1>;
-		num-viewport = <4>;
-		interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "msi";
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0x7>;
-		/*
-		 * Reference manual lists pci irqs incorrectly
-		 * Real hardware ordering is same as imx6: D+MSI, C, B, A
-		 */
-		interrupt-map = <0 0 0 1 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 2 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 3 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 4 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>,
-			 <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>,
-			 <&clks IMX7D_PCIE_PHY_ROOT_CLK>;
-		clock-names = "pcie", "pcie_bus", "pcie_phy";
-		assigned-clocks = <&clks IMX7D_PCIE_CTRL_ROOT_SRC>,
-				  <&clks IMX7D_PCIE_PHY_ROOT_SRC>;
-		assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_250M_CLK>,
-					 <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
-
-		fsl,max-link-speed = <2>;
-		power-domains = <&pgc_pcie_phy>;
-		resets = <&src IMX7_RESET_PCIEPHY>,
-			 <&src IMX7_RESET_PCIE_CTRL_APPS_EN>,
-			 <&src IMX7_RESET_PCIE_CTRL_APPS_TURNOFF>;
-		reset-names = "pciephy", "apps", "turnoff";
-		fsl,imx7d-pcie-phy = <&pcie_phy>;
-		status = "disabled";
-	};
-};
-
-&ca_funnel_in_ports {
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	port@1 {
-		reg = <1>;
-		ca_funnel_in_port1: endpoint {
-			remote-endpoint = <&etm1_out_port>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx7s-colibri-aster.dts b/arch/arm/boot/dts/imx7s-colibri-aster.dts
deleted file mode 100644
index fca4e0a95c1b..000000000000
--- a/arch/arm/boot/dts/imx7s-colibri-aster.dts
+++ /dev/null
@@ -1,15 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Copyright 2017-2020 Toradex AG
- *
- */
-
-/dts-v1/;
-#include "imx7s-colibri.dtsi"
-#include "imx7-colibri-aster.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX7S on Aster Carrier Board";
-	compatible = "toradex,colibri-imx7s-aster", "toradex,colibri-imx7s",
-		     "fsl,imx7s";
-};
diff --git a/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts b/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts
deleted file mode 100644
index aa70d3f2e2e2..000000000000
--- a/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-/*
- * Copyright 2016-2020 Toradex
- */
-
-/dts-v1/;
-#include "imx7s-colibri.dtsi"
-#include "imx7-colibri-eval-v3.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX7S on Colibri Evaluation Board V3";
-	compatible = "toradex,colibri-imx7s-eval-v3", "toradex,colibri-imx7s",
-		     "fsl,imx7s";
-};
diff --git a/arch/arm/boot/dts/imx7s-colibri.dtsi b/arch/arm/boot/dts/imx7s-colibri.dtsi
deleted file mode 100644
index 94de220a5965..000000000000
--- a/arch/arm/boot/dts/imx7s-colibri.dtsi
+++ /dev/null
@@ -1,18 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-/*
- * Copyright 2016-2020 Toradex
- */
-
-#include "imx7s.dtsi"
-#include "imx7-colibri.dtsi"
-
-/ {
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>;
-	};
-};
-
-&gpmi {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx7s-mba7.dts b/arch/arm/boot/dts/imx7s-mba7.dts
deleted file mode 100644
index d7d3f530f843..000000000000
--- a/arch/arm/boot/dts/imx7s-mba7.dts
+++ /dev/null
@@ -1,18 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Device Tree Source for TQ Systems TQMa7S board on MBa7 carrier board.
- *
- * Copyright (C) 2016 TQ Systems GmbH
- * Author: Markus Niebel <Markus.Niebel@tq-group.com>
- * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
- */
-
-/dts-v1/;
-
-#include "imx7s-tqma7.dtsi"
-#include "imx7-mba7.dtsi"
-
-/ {
-	model = "TQ Systems TQMa7S board on MBa7 carrier board";
-	compatible = "tq,imx7s-mba7", "tq,imx7s-tqma7", "fsl,imx7s";
-};
diff --git a/arch/arm/boot/dts/imx7s-tqma7.dtsi b/arch/arm/boot/dts/imx7s-tqma7.dtsi
deleted file mode 100644
index 5f5433eb7dd7..000000000000
--- a/arch/arm/boot/dts/imx7s-tqma7.dtsi
+++ /dev/null
@@ -1,11 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Device Tree Include file for TQ Systems TQMa7S board with NXP i.MX7Solo SoC.
- *
- * Copyright (C) 2016 TQ Systems GmbH
- * Author: Markus Niebel <Markus.Niebel@tq-group.com>
- * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
- */
-
-#include "imx7s.dtsi"
-#include "imx7-tqma7.dtsi"
diff --git a/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts b/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts
deleted file mode 100644
index 77e78c6dc2cd..000000000000
--- a/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts
+++ /dev/null
@@ -1,158 +0,0 @@
-// SPDX-License-Identifier: ISC
-/*
- * Device Tree file for the Freecom FSG-3 router.
- * This machine is based on IXP425.
- * This device tree is inspired by the board file by Rod Whitby.
- */
-
-/dts-v1/;
-
-#include "intel-ixp42x.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Freecom FSG-3";
-	compatible = "freecom,fsg-3", "intel,ixp42x";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory@0 {
-		/* 64 MB memory */
-		device_type = "memory";
-		reg = <0x00000000 0x4000000>;
-	};
-
-	chosen {
-		/* Boot from the first partition on the hard drive */
-		bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootfstype=ext4 rootwait";
-		stdout-path = "uart0:115200n8";
-	};
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		button-sync {
-			wakeup-source;
-			/* Closest approximation of what the key should do */
-			linux,code = <KEY_CONNECT>;
-			label = "sync";
-			gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
-		};
-		button-reset {
-			wakeup-source;
-			linux,code = <KEY_ESC>;
-			label = "reset";
-			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
-		};
-		button-usb {
-			wakeup-source;
-			/* Unplug USB, closest approximation of what the key should do */
-			linux,code = <KEY_EJECTCD>;
-			label = "usb";
-			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	i2c {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpio0 12 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpio0 13 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		hwmon@28 {
-			/*
-			 * Temperature sensor and fan control chip.
-			 *
-			 * TODO: create a proper device tree binding for
-			 * the sensor and temperature zone and create a
-			 * zone with fan control.
-			 */
-			compatible = "winbond,w83781d";
-			reg = <0x28>;
-		};
-		rtc@6f {
-			compatible = "isil,isl1208";
-			reg = <0x6f>;
-		};
-	};
-
-	soc {
-		bus@c4000000 {
-			flash@0,0 {
-				compatible = "intel,ixp4xx-flash", "cfi-flash";
-				bank-width = <2>;
-				/* Enable writes on the expansion bus */
-				intel,ixp4xx-eb-write-enable = <1>;
-				/* 4 MB of Flash mapped in at CS0 */
-				reg = <0 0x00000000 0x400000>;
-
-				partitions {
-					compatible = "redboot-fis";
-					/* Eraseblock at 0x3e0000 */
-					fis-index-block = <0x1f>;
-				};
-			};
-		};
-
-		pci@c0000000 {
-			status = "ok";
-
-			/*
-			 * Written based on the FSG-3 PCI boardfile.
-			 * We have slots 12, 13 & 14 (IDSEL) with one IRQ each.
-			 */
-			interrupt-map =
-			/* IDSEL 12 */
-			<0x6000 0 0 1 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 12 is irq 5 */
-			<0x6000 0 0 2 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 12 is irq 5 */
-			<0x6000 0 0 3 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 12 is irq 5 */
-			<0x6000 0 0 4 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 12 is irq 5 */
-			/* IDSEL 13 */
-			<0x6800 0 0 1 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 13 is irq 7 */
-			<0x6800 0 0 2 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 13 is irq 7 */
-			<0x6800 0 0 3 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 13 is irq 7 */
-			<0x6800 0 0 4 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 13 is irq 7 */
-			/* IDSEL 14 */
-			<0x7000 0 0 1 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 14 is irq 6 */
-			<0x7000 0 0 2 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 14 is irq 6 */
-			<0x7000 0 0 3 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 14 is irq 6 */
-			<0x7000 0 0 4 &gpio0 6 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 14 is irq 6 */
-		};
-
-		/* EthB */
-		ethernet@c8009000 {
-			status = "ok";
-			queue-rx = <&qmgr 3>;
-			queue-txready = <&qmgr 20>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy5>;
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				phy4: ethernet-phy@4 {
-					reg = <4>;
-				};
-
-				phy5: ethernet-phy@5 {
-					reg = <5>;
-				};
-			};
-		};
-
-		/* EthC */
-		ethernet@c800a000 {
-			status = "ok";
-			queue-rx = <&qmgr 4>;
-			queue-txready = <&qmgr 21>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy4>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts b/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts
deleted file mode 100644
index 6b28dda747fd..000000000000
--- a/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts
+++ /dev/null
@@ -1,173 +0,0 @@
-// SPDX-License-Identifier: ISC
-/*
- * Device Tree file for the Linksys WRV54G router
- * Also known as Gemtek GTWX5715
- * Based on a board file by George T. Joseph and other patches.
- * This machine is based on IXP425.
- */
-
-/dts-v1/;
-
-#include "intel-ixp42x.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Linksys WRV54G / Gemtek GTWX5715";
-	compatible = "linksys,wrv54g", "gemtek,gtwx5715", "intel,ixp42x";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory@0 {
-		/* 32 MB memory */
-		device_type = "memory";
-		reg = <0x00000000 0x2000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = "uart1:115200n8";
-	};
-
-	aliases {
-		/* UART2 is the primary console */
-		serial0 = &uart1;
-		serial1 = &uart0;
-	};
-
-	/* There is an unpopulated LED slot (3) connected to GPIO 8 */
-	leds {
-		compatible = "gpio-leds";
-		led-power {
-			label = "wrv54g:yellow:power";
-			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-		led-wireless {
-			label = "wrv54g:yellow:wireless";
-			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-		led-internet {
-			label = "wrv54g:yellow:internet";
-			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-		led-dmz {
-			label = "wrv54g:green:dmz";
-			gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-	};
-
-	/* This set-up comes from an OpenWrt patch */
-	spi {
-		compatible = "spi-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		sck-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
-		miso-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-		mosi-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
-		cs-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
-		num-chipselects = <1>;
-
-		switch@0 {
-			compatible = "micrel,ks8995";
-			reg = <0>;
-			spi-max-frequency = <50000000>;
-		};
-	};
-
-	soc {
-		bus@c4000000 {
-			flash@0,0 {
-				compatible = "intel,ixp4xx-flash", "cfi-flash";
-				bank-width = <2>;
-				/* Enable writes on the expansion bus */
-				intel,ixp4xx-eb-write-enable = <1>;
-				/* 8 MB of Flash mapped in at CS0 */
-				reg = <0 0x00000000 0x00800000>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					/*
-					 * Partition info from a boot log
-					 * CHECKME: not using redboot? FIS index 0x3f @7e00000?
-					 */
-					#address-cells = <1>;
-					#size-cells = <1>;
-					partition@0 {
-						label = "boot";
-						reg = <0x0 0x140000>;
-						read-only;
-					};
-					partition@140000 {
-						label = "linux";
-						reg = <0x140000 0x100000>;
-						read-only;
-					};
-					partition@240000 {
-						label = "root";
-						reg = <0x240000 0x480000>;
-						read-write;
-					};
-				};
-			};
-		};
-
-		pci@c0000000 {
-			status = "ok";
-
-			/*
-			 * We have up to 2 slots (IDSEL) with 2 swizzled IRQs.
-			 * Derived from the GTWX5715 PCI boardfile.
-			 */
-			interrupt-map =
-			/* IDSEL 0 */
-			<0x0000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 0 is irq 10 */
-			<0x0000 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 0 is irq 11 */
-			/* IDSEL 1 */
-			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
-			<0x0800 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>; /* INT B on slot 1 is irq 10 */
-		};
-
-		/*
-		 * EthB - connected to the KS8995 switch ports 1-4
-		 * FIXME: the boardfile defines .phy_mask = 0x1e for this port to enable output to
-		 * all four switch ports, also using an out of tree multiphy patch.
-		 * Do we need a new binding and property for this?
-		 */
-		ethernet@c8009000 {
-			status = "ok";
-			queue-rx = <&qmgr 3>;
-			queue-txready = <&qmgr 20>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy4>;
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				/* Should be ports 1-4 on the KS8995 switch */
-				phy4: ethernet-phy@4 {
-					reg = <4>;
-				};
-
-				/* Should be port 5 on the KS8995 switch */
-				phy5: ethernet-phy@5 {
-					reg = <5>;
-				};
-			};
-		};
-
-		/* EthC - connected to KS8995 switch port 5 */
-		ethernet@c800a000 {
-			status = "ok";
-			queue-rx = <&qmgr 4>;
-			queue-txready = <&qmgr 21>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy5>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v2.dts b/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v2.dts
deleted file mode 100644
index 04a0f7138967..000000000000
--- a/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v2.dts
+++ /dev/null
@@ -1,95 +0,0 @@
-// SPDX-License-Identifier: ISC
-/*
- * Device Tree file for Netgear WG302v2 based on IXP422BB
- * Derived from boardfiles written by Imre Kaloz
- */
-
-/dts-v1/;
-
-#include "intel-ixp42x.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Netgear WG302 v2";
-	compatible = "netgear,wg302v2", "intel,ixp42x";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory@0 {
-		/* 16 MB SDRAM according to OpenWrt database */
-		device_type = "memory";
-		reg = <0x00000000 0x01000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootwait";
-		stdout-path = "uart1:115200n8";
-	};
-
-	aliases {
-		/* These are switched around */
-		serial0 = &uart1;
-		serial1 = &uart0;
-	};
-
-	soc {
-		bus@c4000000 {
-			flash@0,0 {
-				compatible = "intel,ixp4xx-flash", "cfi-flash";
-				bank-width = <2>;
-				/*
-				 * 32 MB of Flash in 128 0x20000 sized blocks
-				 * mapped in at CS0 and CS1
-				 */
-				reg = <0 0x00000000 0x2000000>;
-
-				/* Configure expansion bus to allow writes */
-				intel,ixp4xx-eb-write-enable = <1>;
-
-				partitions {
-					compatible = "redboot-fis";
-					/* CHECKME: guess this is Redboot FIS */
-					fis-index-block = <0xff>;
-				};
-			};
-		};
-
-		pci@c0000000 {
-			status = "ok";
-
-			/*
-			 * Taken from WG302 v2 PCI boardfile (wg302v2-pci.c)
-			 * We have slots (IDSEL) 1 and 2 with one assigned IRQ
-			 * each handling all IRQs.
-			 */
-			interrupt-map =
-			/* IDSEL 1 */
-			<0x0800 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 8 */
-			<0x0800 0 0 2 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 8 */
-			<0x0800 0 0 3 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 8 */
-			<0x0800 0 0 4 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 8 */
-			/* IDSEL 2 */
-			<0x1000 0 0 1 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 9 */
-			<0x1000 0 0 2 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 9 */
-			<0x1000 0 0 3 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 9 */
-			<0x1000 0 0 4 &gpio0 9 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 2 is irq 9 */
-		};
-
-		ethernet@c8009000 {
-			status = "ok";
-			queue-rx = <&qmgr 3>;
-			queue-txready = <&qmgr 20>;
-			phy-mode = "rgmii";
-			phy-handle = <&phy8>;
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				phy8: ethernet-phy@8 {
-					reg = <8>;
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/intel/Makefile b/arch/arm/boot/dts/intel/Makefile
new file mode 100644
index 000000000000..c5fc845deb61
--- /dev/null
+++ b/arch/arm/boot/dts/intel/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+subdir-y += axm
+subdir-y += ixp
+subdir-y += pxa
+subdir-y += socfpga
diff --git a/arch/arm/boot/dts/intel/axm/Makefile b/arch/arm/boot/dts/intel/axm/Makefile
new file mode 100644
index 000000000000..7c7dc679964d
--- /dev/null
+++ b/arch/arm/boot/dts/intel/axm/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_AXXIA) += \
+	axm5516-amarillo.dtb
+dtb-$(CONFIG_ARCH_AXXIA) += \
+	axm5516-amarillo.dtb
diff --git a/arch/arm/boot/dts/axm5516-amarillo.dts b/arch/arm/boot/dts/intel/axm/axm5516-amarillo.dts
index 2e2ad3c7ee77..2e2ad3c7ee77 100644
--- a/arch/arm/boot/dts/axm5516-amarillo.dts
+++ b/arch/arm/boot/dts/intel/axm/axm5516-amarillo.dts
diff --git a/arch/arm/boot/dts/axm5516-cpus.dtsi b/arch/arm/boot/dts/intel/axm/axm5516-cpus.dtsi
index 3bcf4e0a3c85..f13ef80b6637 100644
--- a/arch/arm/boot/dts/axm5516-cpus.dtsi
+++ b/arch/arm/boot/dts/intel/axm/axm5516-cpus.dtsi
@@ -73,7 +73,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x00>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -81,7 +81,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x01>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -89,7 +89,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x02>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -97,7 +97,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x03>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -105,7 +105,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x100>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -113,7 +113,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x101>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -121,7 +121,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x102>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -129,7 +129,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x103>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -137,7 +137,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x200>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -145,7 +145,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x201>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -153,7 +153,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x202>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -161,7 +161,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x203>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -169,7 +169,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x300>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -177,7 +177,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x301>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -185,7 +185,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x302>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -193,7 +193,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x303>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 	};
diff --git a/arch/arm/boot/dts/axm55xx.dtsi b/arch/arm/boot/dts/intel/axm/axm55xx.dtsi
index 7676a65059a4..5277890cfad2 100644
--- a/arch/arm/boot/dts/axm55xx.dtsi
+++ b/arch/arm/boot/dts/intel/axm/axm55xx.dtsi
@@ -108,7 +108,7 @@
 			#size-cells = <2>;
 			ranges;
 
-			serial0: uart@2010080000 {
+			serial0: serial@2010080000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x20 0x10080000 0 0x1000>;
 				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
@@ -117,7 +117,7 @@
 				status = "disabled";
 			};
 
-			serial1: uart@2010081000 {
+			serial1: serial@2010081000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x20 0x10081000 0 0x1000>;
 				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
@@ -126,7 +126,7 @@
 				status = "disabled";
 			};
 
-			serial2: uart@2010082000 {
+			serial2: serial@2010082000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x20 0x10082000 0 0x1000>;
 				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
@@ -135,7 +135,7 @@
 				status = "disabled";
 			};
 
-			serial3: uart@2010083000 {
+			serial3: serial@2010083000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x20 0x10083000 0 0x1000>;
 				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/intel/ixp/Makefile b/arch/arm/boot/dts/intel/ixp/Makefile
new file mode 100644
index 000000000000..cb30d8d55016
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/Makefile
@@ -0,0 +1,22 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_IXP4XX) += \
+	intel-ixp42x-actiontec-mi424wr-ac.dtb \
+	intel-ixp42x-actiontec-mi424wr-d.dtb \
+	intel-ixp42x-linksys-nslu2.dtb \
+	intel-ixp42x-linksys-wrv54g.dtb \
+	intel-ixp42x-freecom-fsg-3.dtb \
+	intel-ixp42x-welltech-epbx100.dtb \
+	intel-ixp42x-ixdp425.dtb \
+	intel-ixp43x-kixrp435.dtb \
+	intel-ixp46x-ixdp465.dtb \
+	intel-ixp42x-adi-coyote.dtb \
+	intel-ixp42x-ixdpg425.dtb \
+	intel-ixp42x-goramo-multilink.dtb \
+	intel-ixp42x-iomega-nas100d.dtb \
+	intel-ixp42x-dlink-dsm-g600.dtb \
+	intel-ixp42x-gateworks-gw2348.dtb \
+	intel-ixp43x-gateworks-gw2358.dtb \
+	intel-ixp42x-netgear-wg302v1.dtb \
+	intel-ixp42x-arcom-vulcan.dtb \
+	intel-ixp42x-gateway-7001.dtb \
+	intel-ixp42x-usrobotics-usr8200.dtb
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-ac.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-ac.dts
new file mode 100644
index 000000000000..413b9255f9e3
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-ac.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the IXP425-based Actiontec MI424WR revision A and C
+ * Based on a board file from OpenWrt by Jose Vasconcellos.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x-actiontec-mi424wr.dtsi"
+
+/ {
+	model = "Actiontec MI424WR rev A/C";
+	compatible = "actiontec,mi424wr-ac", "intel,ixp42x";
+
+	soc {
+		/* EthB used for WAN */
+		ethernet@c8009000 {
+			phy-handle = <&phy17>; // 17 on revision A-C
+
+			mdio {
+				phy17: ethernet-phy@17 {
+					/* WAN */
+					reg = <17>;
+				};
+			};
+		};
+
+		/* EthC used for LAN */
+		ethernet@c800a000 {
+			/* Fixed link to the CPU MII port on the KS8995 */
+			fixed-link {
+				speed = <100>;
+				full-duplex;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-d.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-d.dts
new file mode 100644
index 000000000000..3619c6411a5c
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-d.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the IXP425-based Actiontec MI424WR revision D
+ * Based on a board file from OpenWrt by Jose Vasconcellos.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x-actiontec-mi424wr.dtsi"
+
+/ {
+	model = "Actiontec MI424WR rev D";
+	compatible = "actiontec,mi424wr-d", "intel,ixp42x";
+
+	soc {
+		/* EthB used for LAN */
+		ethernet@c8009000 {
+			/* Fixed link to the CPU MII port on the KS8995 */
+			fixed-link {
+				speed = <100>;
+				full-duplex;
+			};
+
+			mdio {
+				/* PHY ID 0x00221450 */
+				phy5: ethernet-phy@5 {
+					/* WAN */
+					reg = <5>;
+				};
+			};
+		};
+
+		/* EthC used for WAN */
+		ethernet@c800a000 {
+			phy-handle = <&phy5>; // 5 on revision D
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr.dtsi b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr.dtsi
new file mode 100644
index 000000000000..76fd97c5beb6
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr.dtsi
@@ -0,0 +1,272 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the IXP425-based Actiontec MI424WR
+ * Based on a board file from OpenWrt by Jose Vasconcellos.
+ */
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x02000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = "uart1:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-wan-coax {
+			color = <LED_COLOR_ID_GREEN>;
+			function = "wan-coax";
+			gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-power-alarm {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_ALARM;
+			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-power {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+		led-wireless {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WLAN;
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		led-internet-down {
+			color = <LED_COLOR_ID_RED>;
+			function = "internet-down";
+			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-internet-up {
+			color = <LED_COLOR_ID_GREEN>;
+			function = "internet-up";
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-lan-coax {
+			color = <LED_COLOR_ID_GREEN>;
+			function = "lan-coax";
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-wan-ethernet-alarm {
+			color = <LED_COLOR_ID_RED>;
+			function = "wan-ethernet-alarm";
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		/* The last three LEDs are not mounted but traces exist on the PCB */
+		led-phone-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = "phone-1";
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		led-phone-2 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = "phone-2";
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		led-voip {
+			color = <LED_COLOR_ID_GREEN>;
+			function = "voip";
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-reset {
+			wakeup-source;
+			linux,code = <KEY_RESTART>;
+			label = "reset";
+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+
+		ethernet-switch@0 {
+			compatible = "micrel,ks8995";
+			reg = <0>;
+			spi-max-frequency = <50000000>;
+
+			ethernet-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ethernet-port@0 {
+					reg = <0>;
+					label = "lan1";
+					phy-mode = "mii";
+					phy-handle = <&phy1>;
+				};
+				ethernet-port@1 {
+					reg = <1>;
+					label = "lan2";
+					phy-mode = "mii";
+					phy-handle = <&phy2>;
+				};
+				ethernet-port@2 {
+					reg = <2>;
+					label = "lan3";
+					phy-mode = "mii";
+					phy-handle = <&phy3>;
+				};
+				ethernet-port@3 {
+					reg = <3>;
+					label = "lan4";
+					phy-mode = "mii";
+					phy-handle = <&phy4>;
+				};
+				ethernet-port@4 {
+					reg = <4>;
+					ethernet = <&ethc>;
+					phy-mode = "mii";
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+
+			};
+		};
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/*
+				 * 8 MB of Flash in 64 0x20000 sized blocks
+				 * mapped in at CS0.
+				 */
+				reg = <0 0x00000000 0x0800000>;
+
+				/* Configure expansion bus to allow writes */
+				intel,ixp4xx-eb-write-enable = <1>;
+
+				partitions {
+					compatible = "redboot-fis";
+					fis-index-block = <0x3f>;
+				};
+			};
+			gpio1: gpio@1,0 {
+				/* MMIO GPIO at CS1 */
+				compatible = "intel,ixp4xx-expansion-bus-mmio-gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+				big-endian;
+				reg = <1 0x00000000 0x2>;
+				reg-names = "dat";
+				/* Expansion bus settings */
+				intel,ixp4xx-eb-write-enable = <1>;
+
+				pci-reset-hog {
+					gpio-hog;
+					gpios = <7 GPIO_ACTIVE_HIGH>;
+					output-high;
+					line-name = "PCI reset";
+				};
+				pstn-relay-hog-1 {
+					gpio-hog;
+					gpios = <11 GPIO_ACTIVE_HIGH>;
+					output-low;
+					line-name = "PSTN relay control 1";
+				};
+				pstn-relay-hog-2 {
+					gpio-hog;
+					gpios = <12 GPIO_ACTIVE_HIGH>;
+					output-low;
+					line-name = "PSTN relay control 2";
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 13 */
+			<0x6800 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 13 is irq 8 */
+			<0x6800 0 0 2 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 13 is irq 6 */
+			/* IDSEL 14 */
+			<0x7000 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 14 is irq 7 */
+			<0x7000 0 0 2 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 14 is irq 8 */
+			/* IDSEL 15 */
+			<0x7800 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 15 is irq 6 */
+			<0x7800 0 0 2 &gpio0 6 IRQ_TYPE_LEVEL_LOW>; /* INT B on slot 15 is irq 7 */
+		};
+
+		ethb: ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "mii";
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/* 1, 2, 3 and 4 are ports on the KS8995 switch */
+				phy1: ethernet-phy@1 {
+					/* LAN1 */
+					reg = <1>;
+				};
+				phy2: ethernet-phy@2 {
+					/* LAN2 */
+					reg = <2>;
+				};
+				phy3: ethernet-phy@3 {
+					/* LAN3 */
+					reg = <3>;
+				};
+				phy4: ethernet-phy@4 {
+					/* LAN4 */
+					reg = <4>;
+				};
+			};
+		};
+
+		ethc: ethernet@c800a000 {
+			status = "okay";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "mii";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-adi-coyote.dts
index 44c017b78008..765ab36e6f0c 100644
--- a/arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-adi-coyote.dts
@@ -56,13 +56,15 @@
 		};
 
 		pci@c0000000 {
-			status = "ok";
+			status = "okay";
 
 			/*
 			 * Taken from Coyote PCI boardfile.
 			 * We have slots (IDSEL) 1 and 2 with one assigned IRQ
 			 * each handling all IRQs.
 			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
 			interrupt-map =
 			/* IDSEL 1 */
 			<0x0800 0 0 1 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 6 */
@@ -78,7 +80,7 @@
 
 		/* EthB */
 		ethernet@c8009000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 3>;
 			queue-txready = <&qmgr 20>;
 			phy-mode = "rgmii";
@@ -100,7 +102,7 @@
 
 		/* EthC */
 		ethernet@c800a000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 4>;
 			queue-txready = <&qmgr 21>;
 			phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-arcom-vulcan.dts
index 7200126cb3b5..6f5b4e4eb1cc 100644
--- a/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-arcom-vulcan.dts
@@ -112,7 +112,7 @@
 		};
 
 		pci@c0000000 {
-			status = "ok";
+			status = "okay";
 
 			/*
 			 * Taken from Vulcan PCI boardfile.
@@ -120,6 +120,8 @@
 			 * We have 2 slots (IDSEL) 1 and 2 with one dedicated interrupt
 			 * per slot. This interrupt is shared (OR:ed) by all four pins.
 			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
 			interrupt-map =
 			/* IDSEL 1 */
 			<0x0800 0 0 1 &gpio0 2 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 2 */
@@ -135,7 +137,7 @@
 
 		/* EthB */
 		ethernet@c8009000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 3>;
 			queue-txready = <&qmgr 20>;
 			phy-mode = "rgmii";
@@ -157,7 +159,7 @@
 
 		/* EthC */
 		ethernet@c800a000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 4>;
 			queue-txready = <&qmgr 21>;
 			phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-dlink-dsm-g600.dts
index 8b32e9f22d81..fa133c913606 100644
--- a/arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-dlink-dsm-g600.dts
@@ -57,7 +57,7 @@
 
 		button-reset {
 			wakeup-source;
-			linux,code = <KEY_ESC>;
+			linux,code = <KEY_RESTART>;
 			label = "reset";
 			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
 		};
@@ -122,13 +122,15 @@
 		};
 
 		pci@c0000000 {
-			status = "ok";
+			status = "okay";
 
 			/*
 			 * Taken from DSM-G600 PCI boardfile (dsmg600-pci.c)
 			 * We have slots (IDSEL) 1, 2, 3, 4 and pins 1, 2 and 3.
 			 * Only slot 3 have three IRQs.
 			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
 			interrupt-map =
 			/* IDSEL 1 */
 			<0x0800 0 0 1 &gpio0 7  IRQ_TYPE_LEVEL_LOW>, /* INT E on slot 1 is irq 7 */
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-freecom-fsg-3.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-freecom-fsg-3.dts
new file mode 100644
index 000000000000..73d3c11dd0d4
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-freecom-fsg-3.dts
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Freecom FSG-3 router.
+ * This machine is based on IXP425.
+ * This device tree is inspired by the board file by Rod Whitby.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Freecom FSG-3";
+	compatible = "freecom,fsg-3", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 64 MB memory */
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	chosen {
+		/* Boot from the first partition on the hard drive */
+		bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootfstype=ext4 rootwait";
+		stdout-path = "uart0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-sync {
+			wakeup-source;
+			/* Closest approximation of what the key should do */
+			linux,code = <KEY_CONNECT>;
+			label = "sync";
+			gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+		};
+		button-reset {
+			wakeup-source;
+			linux,code = <KEY_RESTART>;
+			label = "reset";
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+		};
+		button-usb {
+			wakeup-source;
+			/* Unplug USB, closest approximation of what the key should do */
+			linux,code = <KEY_EJECTCD>;
+			label = "usb";
+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio0 12 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio0 13 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hwmon@28 {
+			/*
+			 * Temperature sensor and fan control chip.
+			 *
+			 * TODO: create a proper device tree binding for
+			 * the sensor and temperature zone and create a
+			 * zone with fan control.
+			 */
+			compatible = "winbond,w83781d";
+			reg = <0x28>;
+		};
+		rtc@6f {
+			compatible = "isil,isl1208";
+			reg = <0x6f>;
+		};
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/* Enable writes on the expansion bus */
+				intel,ixp4xx-eb-write-enable = <1>;
+				/* 4 MB of Flash mapped in at CS0 */
+				reg = <0 0x00000000 0x400000>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* Eraseblock at 0x3e0000 */
+					fis-index-block = <0x1f>;
+				};
+			};
+
+			/* Small syscon with some LEDs at CS2 */
+			syscon@2,0 {
+				compatible = "freecom,fsg-cs2-system-controller", "syscon";
+				reg = <2 0x0 0x200>;
+				reg-io-width = <2>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <2 0x0 0x0 0x200>;
+
+				led@0,0 {
+					compatible = "register-bit-led";
+					reg = <0x00 0x02>;
+					mask = <0x01>;
+					label = "fsg:blue:wlan";
+					linux,default-trigger = "wlan";
+					default-state = "on";
+				};
+				led@0,1 {
+					compatible = "register-bit-led";
+					reg = <0x00 0x02>;
+					mask = <0x02>;
+					label = "fsg:blue:wan";
+					linux,default-trigger = "";
+					default-state = "on";
+				};
+				led@0,2 {
+					compatible = "register-bit-led";
+					reg = <0x00 0x02>;
+					mask = <0x04>;
+					label = "fsg:blue:sata";
+					linux,default-trigger = "";
+					default-state = "on";
+				};
+				led@0,3 {
+					compatible = "register-bit-led";
+					reg = <0x00 0x02>;
+					mask = <0x04>;
+					label = "fsg:blue:usb";
+					linux,default-trigger = "";
+					default-state = "on";
+				};
+				led@0,4 {
+					compatible = "register-bit-led";
+					reg = <0x00 0x02>;
+					mask = <0x08>;
+					label = "fsg:blue:sync";
+					linux,default-trigger = "";
+					default-state = "on";
+				};
+				led@0,5 {
+					compatible = "register-bit-led";
+					reg = <0x00 0x02>;
+					mask = <0x10>;
+					label = "fsg:blue:ring";
+					linux,default-trigger = "";
+					default-state = "on";
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * Written based on the FSG-3 PCI boardfile.
+			 * We have slots 12, 13 & 14 (IDSEL) with one IRQ each.
+			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 12 */
+			<0x6000 0 0 1 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 12 is irq 5 */
+			<0x6000 0 0 2 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 12 is irq 5 */
+			<0x6000 0 0 3 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 12 is irq 5 */
+			<0x6000 0 0 4 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 12 is irq 5 */
+			/* IDSEL 13 */
+			<0x6800 0 0 1 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 13 is irq 7 */
+			<0x6800 0 0 2 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 13 is irq 7 */
+			<0x6800 0 0 3 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 13 is irq 7 */
+			<0x6800 0 0 4 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 13 is irq 7 */
+			/* IDSEL 14 */
+			<0x7000 0 0 1 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 14 is irq 6 */
+			<0x7000 0 0 2 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 14 is irq 6 */
+			<0x7000 0 0 3 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 14 is irq 6 */
+			<0x7000 0 0 4 &gpio0 6 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 14 is irq 6 */
+		};
+
+		/* EthB */
+		ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy5>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy4: ethernet-phy@4 {
+					reg = <4>;
+				};
+
+				phy5: ethernet-phy@5 {
+					reg = <5>;
+				};
+			};
+		};
+
+		/* EthC */
+		ethernet@c800a000 {
+			status = "okay";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy4>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts
new file mode 100644
index 000000000000..6d5e69035f94
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Gateway 7001 AP based on IXP422
+ * Derived from boardfiles written by Imre Kaloz
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Gateway 7001 AP";
+	compatible = "gateway,7001", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 32 MB SDRAM */
+		device_type = "memory";
+		reg = <0x00000000 0x2000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = "uart1:115200n8";
+	};
+
+	aliases {
+		/* second UART is the primary console */
+		serial0 = &uart1;
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/*
+				 * 8 MB of flash
+				 */
+				reg = <0 0x00000000 0x800000>;
+
+				/* Configure expansion bus to allow writes */
+				intel,ixp4xx-eb-write-enable = <1>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* Eraseblock at 0x7e0000 */
+					fis-index-block = <0x3f>;
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * Taken from Gateway 7001 PCI boardfile (gateway7001-pci.c)
+			 * We have slots (IDSEL) 1 and 2 with one assigned IRQ
+			 * each handling all IRQs.
+			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 1 */
+			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
+			<0x0800 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 11 */
+			<0x0800 0 0 3 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 11 */
+			<0x0800 0 0 4 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 11 */
+			/* IDSEL 2 */
+			<0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */
+			<0x1000 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 10 */
+			<0x1000 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 10 */
+			<0x1000 0 0 4 &gpio0 10 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 2 is irq 10 */
+		};
+
+		ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy1>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		ethernet@c800a000 {
+			status = "okay";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy2>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy2: ethernet-phy@2 {
+					reg = <2>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateworks-gw2348.dts
index a20277ff0420..97e3f25bb210 100644
--- a/arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateworks-gw2348.dts
@@ -108,13 +108,15 @@
 		};
 
 		pci@c0000000 {
-			status = "ok";
+			status = "okay";
 
 			/*
 			 * Taken from Avila PCI boardfile.
 			 *
 			 * We have up to 4 slots (IDSEL) with 4 swizzled IRQs.
 			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
 			interrupt-map =
 			/* IDSEL 1 */
 			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
@@ -140,7 +142,7 @@
 
 		/* EthB */
 		ethernet@c8009000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 3>;
 			queue-txready = <&qmgr 20>;
 			phy-mode = "rgmii";
@@ -162,7 +164,7 @@
 
 		/* EthC */
 		ethernet@c800a000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 4>;
 			queue-txready = <&qmgr 21>;
 			phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts
new file mode 100644
index 000000000000..5f4c849915db
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts
@@ -0,0 +1,182 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Goramo MultiLink Router
+ * There are two variants:
+ * - MultiLink Basic (a box)
+ * - MultiLink Max (19" rack mount)
+ * This device tree supports MultiLink Basic.
+ * This machine is based on IXP425.
+ * This is one of the few devices supporting the IXP4xx High-Speed Serial
+ * (HSS) link for a V.35 WAN interface.
+ * The hardware originates in Poland.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Goramo MultiLink Router";
+	compatible = "goramo,multilink-router", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/*
+		 * 64 MB of RAM according to the manual. The MultiLink
+		 * Max has 128 MB.
+		 */
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = "uart0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	/*
+	 * 74HC4094 which is used as a rudimentary GPIO expander
+	 * FIXME:
+	 * - Create device tree bindings for this as GPIO expander
+	 * - Write a pure DT GPIO driver using these bindings
+	 * - Support cascading in the style of gpio-74x164.c (cannot be reused, very different)
+	 */
+	gpio_74: gpio-74hc4094 {
+		compatible = "nxp,74hc4094";
+		cp-gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+		d-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+		str-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+		/* oe-gpios is optional */
+		gpio-controller;
+		#gpio-cells = <2>;
+		/* We are not cascaded */
+		registers-number = <1>;
+		gpio-line-names = "CONTROL_HSS0_CLK_INT", "CONTROL_HSS1_CLK_INT", "CONTROL_HSS0_DTR_N",
+				"CONTROL_HSS1_DTR_N", "CONTROL_EXT", "CONTROL_AUTO_RESET",
+				"CONTROL_PCI_RESET_N", "CONTROL_EEPROM_WC_N";
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/* Enable writes on the expansion bus */
+				intel,ixp4xx-eb-write-enable = <1>;
+				/* 16 MB of Flash mapped in at CS0 */
+				reg = <0 0x00000000 0x1000000>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* Eraseblock at 0x0fe0000 */
+					fis-index-block = <0x7f>;
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * The device has 4 slots (IDSEL) with one dedicated IRQ per slot.
+			 * The slots have Ethernet, Ethernet, NEC and MPCI.
+			 * The IDSELs are 11, 12, 13, 14.
+			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 11 - Ethernet A */
+			<0x5800 0 0 1 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 11 is irq 4 */
+			<0x5800 0 0 2 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 11 is irq 4 */
+			<0x5800 0 0 3 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 11 is irq 4 */
+			<0x5800 0 0 4 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 11 is irq 4 */
+			/* IDSEL 12 - Ethernet B */
+			<0x6000 0 0 1 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 12 is irq 5 */
+			<0x6000 0 0 2 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 12 is irq 5 */
+			<0x6000 0 0 3 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 12 is irq 5 */
+			<0x6000 0 0 4 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 12 is irq 5 */
+			/* IDSEL 13 - MPCI */
+			<0x6800 0 0 1 &gpio0 12 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 13 is irq 12 */
+			<0x6800 0 0 2 &gpio0 12 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 13 is irq 12 */
+			<0x6800 0 0 3 &gpio0 12 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 13 is irq 12 */
+			<0x6800 0 0 4 &gpio0 12 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 13 is irq 12 */
+			/* IDSEL 14 - NEC */
+			<0x7000 0 0 1 &gpio0 3 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 14 is irq 3 */
+			<0x7000 0 0 2 &gpio0 3 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 14 is irq 3 */
+			<0x7000 0 0 3 &gpio0 3 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 14 is irq 3 */
+			<0x7000 0 0 4 &gpio0 3 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 14 is irq 3 */
+		};
+
+		/* HSS links */
+		npe@c8006000 {
+			hss@0 {
+				status = "okay";
+				intel,queue-chl-rxtrig = <&qmgr 12>;
+				intel,queue-chl-txready = <&qmgr 34>;
+				intel,queue-pkt-rx = <&qmgr 13>;
+				intel,queue-pkt-tx = <&qmgr 14>, <&qmgr 15>, <&qmgr 16>, <&qmgr 17>;
+				intel,queue-pkt-rxfree = <&qmgr 18>, <&qmgr 19>, <&qmgr 20>, <&qmgr 21>;
+				intel,queue-pkt-txdone = <&qmgr 22>;
+				/* The Goramo GPIO-based clock etc control */
+				cts-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+				rts-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+				dcd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+				dtr-gpios = <&gpio_74 2 GPIO_ACTIVE_LOW>;
+				clk-internal-gpios = <&gpio_74 0 GPIO_ACTIVE_HIGH>;
+			};
+			hss@1 {
+				status = "okay";
+				intel,queue-chl-rxtrig = <&qmgr 10>;
+				intel,queue-chl-txready = <&qmgr 35>;
+				intel,queue-pkt-rx = <&qmgr 0>;
+				intel,queue-pkt-tx = <&qmgr 5>, <&qmgr 6>, <&qmgr 7>, <&qmgr 8>;
+				intel,queue-pkt-rxfree = <&qmgr 1>, <&qmgr 2>, <&qmgr 3>, <&qmgr 4>;
+				intel,queue-pkt-txdone = <&qmgr 9>;
+				/* The Goramo GPIO-based clock etc control */
+				cts-gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+				rts-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+				dcd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+				dtr-gpios = <&gpio_74 3 GPIO_ACTIVE_LOW>;
+				clk-internal-gpios = <&gpio_74 1 GPIO_ACTIVE_HIGH>;
+			};
+		};
+
+		/* EthB */
+		ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 32>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy0>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		/* EthC */
+		ethernet@c800a000 {
+			status = "okay";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 33>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-iomega-nas100d.dts
index 8c18d802c849..26f02dad6a54 100644
--- a/arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-iomega-nas100d.dts
@@ -63,7 +63,7 @@
 		};
 		button-reset {
 			wakeup-source;
-			linux,code = <KEY_ESC>;
+			linux,code = <KEY_RESTART>;
 			label = "reset";
 			gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
 		};
@@ -109,12 +109,14 @@
 		};
 
 		pci@c0000000 {
-			status = "ok";
+			status = "okay";
 
 			/*
 			 * Taken from NAS 100D PCI boardfile (nas100d-pci.c)
 			 * We have slots (IDSEL) 1, 2 and 3 and pins 1, 2 and 3.
 			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
 			interrupt-map =
 			/* IDSEL 1 */
 			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
@@ -127,7 +129,7 @@
 		};
 
 		ethernet@c8009000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 3>;
 			queue-txready = <&qmgr 20>;
 			phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel-ixp42x-ixdp425.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-ixdp425.dts
index beaadda4685f..194945748dc3 100644
--- a/arch/arm/boot/dts/intel-ixp42x-ixdp425.dts
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-ixdp425.dts
@@ -40,7 +40,7 @@
 
 		/* EthB */
 		ethernet@c8009000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 3>;
 			queue-txready = <&qmgr 20>;
 			phy-mode = "rgmii";
@@ -62,7 +62,7 @@
 
 		/* EthC */
 		ethernet@c800a000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 4>;
 			queue-txready = <&qmgr 21>;
 			phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-ixdpg425.dts
index 002a8705abc9..7011fea6205b 100644
--- a/arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-ixdpg425.dts
@@ -61,13 +61,15 @@
 		};
 
 		pci@c0000000 {
-			status = "ok";
+			status = "okay";
 
 			/*
 			 * Taken from IXDPG425 PCI boardfile.
 			 * We have slots (IDSEL) 12, 13 and 14 with one assigned IRQ
 			 * for 12 & 13 and one for 14.
 			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
 			interrupt-map =
 			/* IDSEL 12 */
 			<0x6000 0 0 1 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 12 is irq 7 */
@@ -93,7 +95,7 @@
 
 		/* EthB */
 		ethernet@c8009000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 3>;
 			queue-txready = <&qmgr 20>;
 			phy-mode = "rgmii";
@@ -115,7 +117,7 @@
 
 		/* EthC */
 		ethernet@c800a000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 4>;
 			queue-txready = <&qmgr 21>;
 			phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-nslu2.dts
index e3a32b08d167..2f7c34c649ea 100644
--- a/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-nslu2.dts
@@ -65,7 +65,7 @@
 		};
 		button-reset {
 			wakeup-source;
-			linux,code = <KEY_ESC>;
+			linux,code = <KEY_RESTART>;
 			label = "reset";
 			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
 		};
@@ -90,17 +90,26 @@
 		timeout-ms = <5000>;
 	};
 
-	gpio-beeper {
-		compatible = "gpio-beeper";
+	gpio_pwm: pwm {
+		#pwm-cells = <3>;
+		compatible = "pwm-gpio";
 		gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
 	};
 
+	beeper {
+		compatible = "pwm-beeper";
+		pwms = <&gpio_pwm 0 1 0>;
+		beeper-hz = <1000>;
+	};
+
 	soc {
 		bus@c4000000 {
 			/* The first 16MB region at CS0 on the expansion bus */
 			flash@0,0 {
 				compatible = "intel,ixp4xx-flash", "cfi-flash";
 				bank-width = <2>;
+				/* Enable writes on the expansion bus */
+				intel,ixp4xx-eb-write-enable = <1>;
 				/*
 				 * 8 MB of Flash in 0x20000 byte blocks
 				 * mapped in at CS0.
@@ -116,12 +125,14 @@
 		};
 
 		pci@c0000000 {
-			status = "ok";
+			status = "okay";
 
 			/*
 			 * Taken from NSLU2 PCI boardfile, INT A, B, C swizzled D constant
 			 * We have slots (IDSEL) 1, 2 and 3.
 			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
 			interrupt-map =
 			/* IDSEL 1 */
 			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
@@ -141,7 +152,7 @@
 		};
 
 		ethernet@c8009000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 3>;
 			queue-txready = <&qmgr 20>;
 			phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-wrv54g.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-wrv54g.dts
new file mode 100644
index 000000000000..cb1842c83ac8
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-wrv54g.dts
@@ -0,0 +1,239 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Linksys WRV54G router
+ * Also known as Gemtek GTWX5715
+ * Based on a board file by George T. Joseph and other patches.
+ * This machine is based on IXP425.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Linksys WRV54G / Gemtek GTWX5715";
+	compatible = "linksys,wrv54g", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 32 MB memory */
+		device_type = "memory";
+		reg = <0x00000000 0x2000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = "uart1:115200n8";
+	};
+
+	aliases {
+		/* UART2 is the primary console */
+		serial0 = &uart1;
+		serial1 = &uart0;
+	};
+
+	/* There is an unpopulated LED slot (3) connected to GPIO 8 */
+	leds {
+		compatible = "gpio-leds";
+		led-power {
+			label = "wrv54g:yellow:power";
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+		led-wireless {
+			label = "wrv54g:yellow:wireless";
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+		led-internet {
+			label = "wrv54g:yellow:internet";
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+		led-dmz {
+			label = "wrv54g:green:dmz";
+			gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+	};
+
+	/* This set-up comes from an OpenWrt patch */
+	spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+
+		ethernet-switch@0 {
+			compatible = "micrel,ks8995";
+			reg = <0>;
+			spi-max-frequency = <50000000>;
+
+			/*
+			 * The PHYs are accessed over the external MDIO
+			 * bus and not internally through the switch control
+			 * registers.
+			 */
+			ethernet-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ethernet-port@0 {
+					reg = <0>;
+					label = "1";
+					phy-mode = "mii";
+					phy-handle = <&phy1>;
+				};
+				ethernet-port@1 {
+					reg = <1>;
+					label = "2";
+					phy-mode = "mii";
+					phy-handle = <&phy2>;
+				};
+				ethernet-port@2 {
+					reg = <2>;
+					label = "3";
+					phy-mode = "mii";
+					phy-handle = <&phy3>;
+				};
+				ethernet-port@3 {
+					reg = <3>;
+					label = "4";
+					phy-mode = "mii";
+					phy-handle = <&phy4>;
+				};
+				ethernet-port@4 {
+					reg = <4>;
+					ethernet = <&ethb>;
+					phy-mode = "mii";
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+
+			};
+		};
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/* Enable writes on the expansion bus */
+				intel,ixp4xx-eb-write-enable = <1>;
+				/* 8 MB of Flash mapped in at CS0 */
+				reg = <0 0x00000000 0x00800000>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					/*
+					 * Partition info from a boot log
+					 * CHECKME: not using redboot? FIS index 0x3f @7e00000?
+					 */
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "boot";
+						reg = <0x0 0x140000>;
+						read-only;
+					};
+					partition@140000 {
+						label = "linux";
+						reg = <0x140000 0x100000>;
+						read-only;
+					};
+					partition@240000 {
+						label = "root";
+						reg = <0x240000 0x480000>;
+						read-write;
+					};
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * We have up to 2 slots (IDSEL) with 2 swizzled IRQs.
+			 * Derived from the GTWX5715 PCI boardfile.
+			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 0 */
+			<0x0000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 0 is irq 10 */
+			<0x0000 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 0 is irq 11 */
+			/* IDSEL 1 */
+			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
+			<0x0800 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>; /* INT B on slot 1 is irq 10 */
+		};
+
+		/*
+		 * EthB connects to the KS8995 CPU port and faces ports 1-4
+		 * through the switch fabric.
+		 *
+		 * To complicate things, the MDIO channel is also only
+		 * accessible through EthB, but used independently for PHY
+		 * control.
+		 */
+		ethb: ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "mii";
+			fixed-link {
+				speed = <100>;
+				full-duplex;
+			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/*
+				 * LAN ports 1-4 on the KS8995 switch
+				 * and PHY5 for WAN need to be accessed
+				 * through this external MDIO channel.
+				 */
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+				phy2: ethernet-phy@2 {
+					reg = <2>;
+				};
+				phy3: ethernet-phy@3 {
+					reg = <3>;
+				};
+				phy4: ethernet-phy@4 {
+					reg = <4>;
+				};
+				phy5: ethernet-phy@5 {
+					reg = <5>;
+				};
+			};
+		};
+
+		/*
+		 * EthC connects to MII-P5 on the KS8995 bypassing
+		 * all of the switch logic and facing PHY5
+		 */
+		ethc: ethernet@c800a000 {
+			status = "okay";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "mii";
+			phy-handle = <&phy5>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-netgear-wg302v1.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-netgear-wg302v1.dts
new file mode 100644
index 000000000000..a351a97d257e
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-netgear-wg302v1.dts
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Netgear WG302v2 based on IXP422BB
+ * Derived from boardfiles written by Imre Kaloz
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Netgear WG302 v1";
+	compatible = "netgear,wg302v1", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 32 MB SDRAM according to boot arguments */
+		device_type = "memory";
+		reg = <0x00000000 0x02000000>;
+	};
+
+	chosen {
+		/* The RedBoot comes up in 9600 baud so let's keep this */
+		bootargs = "console=ttyS0,9600n8";
+		stdout-path = "uart1:9600n8";
+	};
+
+	aliases {
+		/* These are switched around */
+		serial0 = &uart1;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		test_led: led-test {
+			color = <LED_COLOR_ID_AMBER>;
+			function = "test";
+			gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		wlan_led: led-wlan {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WLAN;
+			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			linux,default-trigger = "phy0tx";
+		};
+	};
+
+	gpio_keys {
+		/* RESET is on GPIO13 which can't fire interrupts */
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		button-reset {
+			linux,code = <KEY_RESTART>;
+			label = "reset";
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/*
+				 * 8 MB of Flash in 64 0x20000 sized blocks
+				 * mapped in at CS0.
+				 */
+				reg = <0 0x00000000 0x800000>;
+
+				/* Configure expansion bus to allow writes */
+				intel,ixp4xx-eb-write-enable = <1>;
+
+				partitions {
+					compatible = "redboot-fis";
+					fis-index-block = <0x3f>;
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * Taken from WG302 v1 PCI boardfile (wg302v1-pci.c)
+			 * We have slots (IDSEL) 1 and 2 with one assigned IRQ
+			 * each handling all IRQs.
+			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 1 */
+			<0x0800 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 8 */
+			<0x0800 0 0 2 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 8 */
+			<0x0800 0 0 3 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 8 */
+			<0x0800 0 0 4 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 8 */
+			/* IDSEL 2 */
+			<0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */
+			<0x1000 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 10 */
+			<0x1000 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 10 */
+			<0x1000 0 0 4 &gpio0 10 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 2 is irq 10 */
+		};
+
+		ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy30>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy30: ethernet-phy@30 {
+					reg = <30>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-usrobotics-usr8200.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-usrobotics-usr8200.dts
new file mode 100644
index 000000000000..2c89db34c8d8
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-usrobotics-usr8200.dts
@@ -0,0 +1,251 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the USRobotics USR8200 firewall
+ * VPN and NAS. Based on know-how from Peter Denison.
+ *
+ * This machine is based on IXP422, the USR internal codename
+ * is "Jeeves".
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "USRobotics USR8200";
+	compatible = "usr,usr8200", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = "uart1:115200n8";
+	};
+
+	aliases {
+		/* These are switched around */
+		serial0 = &uart1;
+		serial1 = &uart0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		ieee1394_led: led-1394 {
+			label = "usr8200:green:1394";
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		usb1_led: led-usb1 {
+			label = "usr8200:green:usb1";
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		usb2_led: led-usb2 {
+			label = "usr8200:green:usb2";
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		wireless_led: led-wireless {
+			/*
+			 * This LED is mounted inside the case but cannot be
+			 * seen from the outside: probably USR planned at one
+			 * point for the device to have a wireless card, then
+			 * changed their mind and didn't mount it, leaving the
+			 * LED in place.
+			 */
+			label = "usr8200:green:wireless";
+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		pwr_led: led-pwr {
+			label = "usr8200:green:pwr";
+			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-reset {
+			wakeup-source;
+			linux,code = <KEY_RESTART>;
+			label = "reset";
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/* Enable writes on the expansion bus */
+				intel,ixp4xx-eb-write-enable = <1>;
+				/* 16 MB of Flash mapped in at CS0 */
+				reg = <0 0x00000000 0x1000000>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* Eraseblock at 0x0fe0000 */
+					fis-index-block = <0x7f>;
+				};
+			};
+			rtc@2,0 {
+				/* EPSON RTC7301 DG DIL-capsule */
+				compatible = "epson,rtc7301dg";
+				/*
+				 * These timing settings were found in the boardfile patch:
+				 * IXP4XX_EXP_CS2 = 0x3fff000 | IXP4XX_EXP_BUS_SIZE(0) | IXP4XX_EXP_BUS_WR_EN |
+				 *                  IXP4XX_EXP_BUS_CS_EN | IXP4XX_EXP_BUS_BYTE_EN;
+				 */
+				intel,ixp4xx-eb-t1 = <0>; // no cycles extra address phase
+				intel,ixp4xx-eb-t2 = <0>; // no cycles extra setup phase
+				intel,ixp4xx-eb-t3 = <15>; // 15 cycles extra strobe phase
+				intel,ixp4xx-eb-t4 = <3>; // 3 cycles extra hold phase
+				intel,ixp4xx-eb-t5 = <15>; // 15 cycles extra recovery phase
+				intel,ixp4xx-eb-cycle-type = <0>; // Intel cycle
+				intel,ixp4xx-eb-byte-access-on-halfword = <0>;
+				intel,ixp4xx-eb-mux-address-and-data = <0>;
+				intel,ixp4xx-eb-ahb-split-transfers = <0>;
+				intel,ixp4xx-eb-write-enable = <1>;
+				intel,ixp4xx-eb-byte-access = <1>;
+				/* 512 bytes at CS2 */
+				reg = <2 0x00000000 0x0000200>;
+				reg-io-width = <1>;
+				native-endian;
+				/* FIXME: try to check if there is an IRQ for the RTC? */
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * Taken from USR8200 boardfile from OpenWrt
+			 *
+			 * We have 3 slots (IDSEL) with partly swizzled IRQs on slot 16.
+			 * We assume the same IRQ for all pins on the remaining slots, that
+			 * is what the boardfile was doing.
+			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 14 used for "Wireless" in the board file */
+			<0x7000 0 0 1 &gpio0 7  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 14 is irq 7 */
+			/* IDSEL 15 used for VIA VT6307 IEEE 1394 Firewire */
+			<0x7800 0 0 1 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 15 is irq 8 */
+			/* IDSEL 16 used for VIA VT6202 USB 2.0 4+1 */
+			<0x8000 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 16 is irq 11 */
+			<0x8000 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 16 is irq 10 */
+			<0x8000 0 0 3 &gpio0 9  IRQ_TYPE_LEVEL_LOW>; /* INT C on slot 16 is irq 9 */
+		};
+
+		gpio@c8004000 {
+			/* Enable clock out on GPIO 15 */
+			intel,ixp4xx-gpio15-clkout;
+		};
+
+		/* EthB WAN */
+		ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy9>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/*
+				 * PHY 0..4 are internal to the MV88E6060 switch but appear
+				 * as independent devices.
+				 */
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+				phy2: ethernet-phy@2 {
+					reg = <2>;
+				};
+				phy3: ethernet-phy@3 {
+					reg = <3>;
+				};
+
+				/* Altima AMI101L used by the WAN port */
+				phy9: ethernet-phy@9 {
+					reg = <9>;
+				};
+
+				/* The switch uses MDIO addresses 16 thru 31 */
+				switch@16 {
+					compatible = "marvell,mv88e6060";
+					reg = <16>;
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+							label = "lan1";
+							phy-handle = <&phy0>;
+						};
+
+						port@1 {
+							reg = <1>;
+							label = "lan2";
+							phy-handle = <&phy1>;
+						};
+
+						port@2 {
+							reg = <2>;
+							label = "lan3";
+							phy-handle = <&phy2>;
+						};
+
+						port@3 {
+							reg = <3>;
+							label = "lan4";
+							phy-handle = <&phy3>;
+						};
+
+						port@5 {
+							/* Port 5 is the CPU port according to the MV88E6060 datasheet */
+							reg = <5>;
+							phy-mode = "rgmii-id";
+							ethernet = <&ethc>;
+							label = "cpu";
+							fixed-link {
+								speed = <100>;
+								full-duplex;
+							};
+						};
+					};
+				};
+			};
+		};
+
+		/* EthC LAN connected to the Marvell DSA Switch */
+		ethc: ethernet@c800a000 {
+			status = "okay";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "rgmii";
+			fixed-link {
+				speed = <100>;
+				full-duplex;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-welltech-epbx100.dts
index f5846a50e4d4..c550c421b659 100644
--- a/arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-welltech-epbx100.dts
@@ -76,5 +76,23 @@
 				};
 			};
 		};
+
+		/* LAN port */
+		ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy5>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy5: ethernet-phy@5 {
+					reg = <5>;
+				};
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/intel-ixp42x.dtsi b/arch/arm/boot/dts/intel/ixp/intel-ixp42x.dtsi
index d0e0f8afb7c9..84cee8ec3ab8 100644
--- a/arch/arm/boot/dts/intel-ixp42x.dtsi
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x.dtsi
@@ -9,7 +9,7 @@
 	soc {
 		bus@c4000000 {
 			compatible = "intel,ixp42x-expansion-bus-controller", "syscon";
-			reg = <0xc4000000 0x28>;
+			reg = <0xc4000000 0x30>;
 		};
 
 		pci@c0000000 {
diff --git a/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp43x-gateworks-gw2358.dts
index 84e6aec8e665..1db849515f9e 100644
--- a/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp43x-gateworks-gw2358.dts
@@ -121,7 +121,7 @@
 		};
 
 		pci@c0000000 {
-			status = "ok";
+			status = "okay";
 
 			/*
 			 * In the boardfile for the Cambria from OpenWRT the interrupts
@@ -131,6 +131,8 @@
 			 * have instead assumed that they are rotated (swizzled) like
 			 * this with 11, 10, 9, 8 for the 4 pins on IDSEL 1 etc.
 			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
 			interrupt-map =
 			/* IDSEL 1 */
 			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
@@ -165,7 +167,7 @@
 		};
 
 		ethernet@c800a000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 4>;
 			queue-txready = <&qmgr 21>;
 			phy-mode = "rgmii";
@@ -186,7 +188,7 @@
 		};
 
 		ethernet@c800c000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 2>;
 			queue-txready = <&qmgr 19>;
 			phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel-ixp43x-kixrp435.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp43x-kixrp435.dts
index 3d7cfa1a5ed4..4703a8b24765 100644
--- a/arch/arm/boot/dts/intel-ixp43x-kixrp435.dts
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp43x-kixrp435.dts
@@ -36,7 +36,7 @@
 
 		/* CHECKME: ethernet set-up taken from Gateworks Cambria */
 		ethernet@c800a000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 4>;
 			queue-txready = <&qmgr 21>;
 			phy-mode = "rgmii";
@@ -57,7 +57,7 @@
 		};
 
 		ethernet@c800c000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 2>;
 			queue-txready = <&qmgr 19>;
 			phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/intel-ixp43x.dtsi b/arch/arm/boot/dts/intel/ixp/intel-ixp43x.dtsi
index 60bf9903e0f8..60bf9903e0f8 100644
--- a/arch/arm/boot/dts/intel-ixp43x.dtsi
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp43x.dtsi
diff --git a/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi b/arch/arm/boot/dts/intel/ixp/intel-ixp45x-ixp46x.dtsi
index b6ff614dadc6..1dd4a65cb7a6 100644
--- a/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp45x-ixp46x.dtsi
@@ -74,5 +74,13 @@
 			queue-rx = <&qmgr 0>;
 			queue-txready = <&qmgr 0>;
 		};
+
+		ptp-timer@c8010000 {
+			compatible = "intel,ixp46x-ptp-timer";
+			reg = <0xc8010000 0x1000>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <8 IRQ_TYPE_EDGE_FALLING>, <7 IRQ_TYPE_EDGE_FALLING>;
+			interrupt-names = "master", "slave";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/intel-ixp46x-ixdp465.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp46x-ixdp465.dts
index a062cd1a6588..a062cd1a6588 100644
--- a/arch/arm/boot/dts/intel-ixp46x-ixdp465.dts
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp46x-ixdp465.dts
diff --git a/arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi b/arch/arm/boot/dts/intel/ixp/intel-ixp4xx-reference-design.dtsi
index c1d9c49982b3..31c0a69771c4 100644
--- a/arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp4xx-reference-design.dtsi
@@ -99,13 +99,15 @@
 		};
 
 		pci@c0000000 {
-			status = "ok";
+			status = "okay";
 
 			/*
 			 * Taken from IXDP425 PCI boardfile.
 			 * PCI slots on the BIXMB425BD base card.
 			 * We have up to 4 slots (IDSEL) with 4 swizzled IRQs.
 			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
 			interrupt-map =
 			/* IDSEL 1 */
 			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
diff --git a/arch/arm/boot/dts/intel-ixp4xx.dtsi b/arch/arm/boot/dts/intel/ixp/intel-ixp4xx.dtsi
index e5af2d463074..0adeccabd4fe 100644
--- a/arch/arm/boot/dts/intel-ixp4xx.dtsi
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp4xx.dtsi
@@ -78,8 +78,6 @@
 			dma-ranges =
 			<0x02000000 0 0x00000000 0x00000000 0 0x04000000>;
 
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0xf800 0 0 7>;
 			/* Each unique DTS using PCI must specify the swizzling */
 		};
 
@@ -141,6 +139,23 @@
 		npe: npe@c8006000 {
 			compatible = "intel,ixp4xx-network-processing-engine";
 			reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* NPE-A contains two high-speed serial links */
+			hss@0 {
+				compatible = "intel,ixp4xx-hss";
+				reg = <0>;
+				intel,npe-handle = <&npe 0>;
+				status = "disabled";
+			};
+
+			hss@1 {
+				compatible = "intel,ixp4xx-hss";
+				reg = <1>;
+				intel,npe-handle = <&npe 0>;
+				status = "disabled";
+			};
 
 			/* NPE-C contains a crypto accelerator */
 			crypto {
@@ -178,10 +193,10 @@
 			compatible = "intel,ixp4xx-ethernet";
 			reg = <0xc800c000 0x1000>;
 			status = "disabled";
-			intel,npe = <0>;
 			/* Dummy values that depend on firmware */
 			queue-rx = <&qmgr 0>;
 			queue-txready = <&qmgr 0>;
+			intel,npe-handle = <&npe 0>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/intel/pxa/Makefile b/arch/arm/boot/dts/intel/pxa/Makefile
new file mode 100644
index 000000000000..24d5240f08e7
--- /dev/null
+++ b/arch/arm/boot/dts/intel/pxa/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_PXA) += \
+	pxa300-raumfeld-connector.dtb \
+	pxa300-raumfeld-controller.dtb \
+	pxa300-raumfeld-speaker-l.dtb \
+	pxa300-raumfeld-speaker-m.dtb \
+	pxa300-raumfeld-speaker-one.dtb \
+	pxa300-raumfeld-speaker-s.dtb
diff --git a/arch/arm/boot/dts/pxa25x.dtsi b/arch/arm/boot/dts/intel/pxa/pxa25x.dtsi
index a248bf038033..5f8300e356ad 100644
--- a/arch/arm/boot/dts/pxa25x.dtsi
+++ b/arch/arm/boot/dts/intel/pxa/pxa25x.dtsi
@@ -38,9 +38,12 @@
 			compatible = "marvell,pdma-1.0";
 			reg = <0x40000000 0x10000>;
 			interrupts = <25>;
-			#dma-channels = <16>;
 			#dma-cells = <2>;
+			/* For backwards compatibility: */
+			#dma-channels = <16>;
+			dma-channels = <16>;
 			#dma-requests = <40>;
+			dma-requests = <40>;
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/intel/pxa/pxa27x.dtsi
index ccbecad9c5c7..a2cbfb3be609 100644
--- a/arch/arm/boot/dts/pxa27x.dtsi
+++ b/arch/arm/boot/dts/intel/pxa/pxa27x.dtsi
@@ -12,9 +12,12 @@
 			compatible = "marvell,pdma-1.0";
 			reg = <0x40000000 0x10000>;
 			interrupts = <25>;
-			#dma-channels = <32>;
 			#dma-cells = <2>;
+			/* For backwards compatibility: */
+			#dma-channels = <32>;
+			dma-channels = <32>;
 			#dma-requests = <75>;
+			dma-requests = <75>;
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/intel/pxa/pxa2xx.dtsi
index 84154c43fe65..84154c43fe65 100644
--- a/arch/arm/boot/dts/pxa2xx.dtsi
+++ b/arch/arm/boot/dts/intel/pxa/pxa2xx.dtsi
diff --git a/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-common.dtsi
index 8a6721d436bd..147c99191dc2 100644
--- a/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi
+++ b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-common.dtsi
@@ -189,31 +189,31 @@
 
 		regulators {
 			regulator-v3 {
-				regulator-compatible= "V3(DCDC)";
+				regulator-compatible = "V3(DCDC)";
 				regulator-min-microvolt = <725000>;
 				regulator-max-microvolt = <1800000>;
 			};
 
 			regulator-v4 {
-				regulator-compatible= "V4(DCDC)";
+				regulator-compatible = "V4(DCDC)";
 				regulator-min-microvolt = <725000>;
 				regulator-max-microvolt = <1800000>;
 			};
 
 			regulator-v5 {
-				regulator-compatible= "V5(LDO)";
+				regulator-compatible = "V5(LDO)";
 				regulator-min-microvolt = <1700000>;
 				regulator-max-microvolt = <2000000>;
 			};
 
 			reg_vcc_sdio: regulator-v6 {
-				regulator-compatible= "V6(LDO)";
+				regulator-compatible = "V6(LDO)";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			regulator-v7 {
-				regulator-compatible= "V7(LDO)";
+				regulator-compatible = "V7(LDO)";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
 			};
diff --git a/arch/arm/boot/dts/pxa300-raumfeld-connector.dts b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-connector.dts
index 3e9445419e39..3e9445419e39 100644
--- a/arch/arm/boot/dts/pxa300-raumfeld-connector.dts
+++ b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-connector.dts
diff --git a/arch/arm/boot/dts/pxa300-raumfeld-controller.dts b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-controller.dts
index 12b15945ac6d..12b15945ac6d 100644
--- a/arch/arm/boot/dts/pxa300-raumfeld-controller.dts
+++ b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-controller.dts
diff --git a/arch/arm/boot/dts/pxa300-raumfeld-speaker-l.dts b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-speaker-l.dts
index 5a0f7f17856f..5a0f7f17856f 100644
--- a/arch/arm/boot/dts/pxa300-raumfeld-speaker-l.dts
+++ b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-speaker-l.dts
diff --git a/arch/arm/boot/dts/pxa300-raumfeld-speaker-m.dts b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-speaker-m.dts
index fa10d896282c..fa10d896282c 100644
--- a/arch/arm/boot/dts/pxa300-raumfeld-speaker-m.dts
+++ b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-speaker-m.dts
diff --git a/arch/arm/boot/dts/pxa300-raumfeld-speaker-one.dts b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-speaker-one.dts
index a70560a8ea92..a70560a8ea92 100644
--- a/arch/arm/boot/dts/pxa300-raumfeld-speaker-one.dts
+++ b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-speaker-one.dts
diff --git a/arch/arm/boot/dts/pxa300-raumfeld-speaker-s.dts b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-speaker-s.dts
index 36e20cbf8704..36e20cbf8704 100644
--- a/arch/arm/boot/dts/pxa300-raumfeld-speaker-s.dts
+++ b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-speaker-s.dts
diff --git a/arch/arm/boot/dts/pxa300-raumfeld-tuneable-clock.dtsi b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-tuneable-clock.dtsi
index 561483b93989..561483b93989 100644
--- a/arch/arm/boot/dts/pxa300-raumfeld-tuneable-clock.dtsi
+++ b/arch/arm/boot/dts/intel/pxa/pxa300-raumfeld-tuneable-clock.dtsi
diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/intel/pxa/pxa3xx.dtsi
index d19674812cd2..f9c216f91865 100644
--- a/arch/arm/boot/dts/pxa3xx.dtsi
+++ b/arch/arm/boot/dts/intel/pxa/pxa3xx.dtsi
@@ -122,9 +122,12 @@
 			compatible = "marvell,pdma-1.0";
 			reg = <0x40000000 0x10000>;
 			interrupts = <25>;
-			#dma-channels = <32>;
 			#dma-cells = <2>;
+			/* For backwards compatibility: */
+			#dma-channels = <32>;
+			dma-channels = <32>;
 			#dma-requests = <100>;
+			dma-requests = <100>;
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/intel/socfpga/Makefile b/arch/arm/boot/dts/intel/socfpga/Makefile
new file mode 100644
index 000000000000..8df0976da01c
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/Makefile
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += \
+	socfpga_arria5_socdk.dtb \
+	socfpga_arria10_chameleonv3.dtb \
+	socfpga_arria10_mercury_aa1_pe1_emmc.dtb \
+	socfpga_arria10_mercury_aa1_pe1_qspi.dtb \
+	socfpga_arria10_mercury_aa1_pe1_sdmmc.dtb \
+	socfpga_arria10_mercury_aa1_pe3_emmc.dtb \
+	socfpga_arria10_mercury_aa1_pe3_qspi.dtb \
+	socfpga_arria10_mercury_aa1_pe3_sdmmc.dtb \
+	socfpga_arria10_mercury_aa1_st1_emmc.dtb \
+	socfpga_arria10_mercury_aa1_st1_qspi.dtb \
+	socfpga_arria10_mercury_aa1_st1_sdmmc.dtb \
+	socfpga_cyclone5_mercury_sa1_pe1_emmc.dtb \
+	socfpga_cyclone5_mercury_sa1_pe1_qspi.dtb \
+	socfpga_cyclone5_mercury_sa1_pe1_sdmmc.dtb \
+	socfpga_cyclone5_mercury_sa1_pe3_emmc.dtb \
+	socfpga_cyclone5_mercury_sa1_pe3_qspi.dtb \
+	socfpga_cyclone5_mercury_sa1_pe3_sdmmc.dtb \
+	socfpga_cyclone5_mercury_sa1_st1_emmc.dtb \
+	socfpga_cyclone5_mercury_sa1_st1_qspi.dtb \
+	socfpga_cyclone5_mercury_sa1_st1_sdmmc.dtb \
+	socfpga_cyclone5_mercury_sa2_pe1_qspi.dtb \
+	socfpga_cyclone5_mercury_sa2_pe1_sdmmc.dtb \
+	socfpga_cyclone5_mercury_sa2_pe3_qspi.dtb \
+	socfpga_cyclone5_mercury_sa2_pe3_sdmmc.dtb \
+	socfpga_cyclone5_mercury_sa2_st1_qspi.dtb \
+	socfpga_cyclone5_mercury_sa2_st1_sdmmc.dtb \
+	socfpga_arria10_socdk_nand.dtb \
+	socfpga_arria10_socdk_qspi.dtb \
+	socfpga_arria10_socdk_sdmmc.dtb \
+	socfpga_cyclone5_chameleon96.dtb \
+	socfpga_cyclone5_mcvevk.dtb \
+	socfpga_cyclone5_socdk.dtb \
+	socfpga_cyclone5_de0_nano_soc.dtb \
+	socfpga_cyclone5_de10nano.dtb \
+	socfpga_cyclone5_sockit.dtb \
+	socfpga_cyclone5_socrates.dtb \
+	socfpga_cyclone5_sodia.dtb \
+	socfpga_cyclone5_vining_fpga.dtb \
+	socfpga_vt.dtb
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga.dtsi
index 0b021eef0b53..35be14150f41 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga.dtsi
@@ -46,7 +46,7 @@
 		      <0xff113000 0x1000>;
 	};
 
-	intc: intc@fffed000 {
+	intc: interrupt-controller@fffed000 {
 		compatible = "arm,cortex-a9-gic";
 		#interrupt-cells = <3>;
 		interrupt-controller;
@@ -80,8 +80,6 @@
 					     <0 110 4>,
 					     <0 111 4>;
 				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
 				clocks = <&l4_main_clk>;
 				clock-names = "apb_pclk";
 				resets = <&rst DMA_RESET>;
@@ -455,7 +453,6 @@
 						compatible = "altr,socfpga-gate-clk";
 						clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
 						clk-gate = <0xa0 8>;
-						clk-phase = <0 135>;
 					};
 
 					sdmmc_clk_divided: sdmmc_clk_divided {
@@ -563,6 +560,12 @@
 			interrupts = <0 175 4>;
 		};
 
+		socfpga_axi_setup: stmmac-axi-config {
+			snps,wr_osr_lmt = <0xf>;
+			snps,rd_osr_lmt = <0xf>;
+			snps,blen = <0 0 0 0 16 0 0>;
+		};
+
 		gmac0: ethernet@ff700000 {
 			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
 			altr,sysmgr-syscon = <&sysmgr 0x60 0>;
@@ -578,6 +581,7 @@
 			snps,perfect-filter-entries = <128>;
 			tx-fifo-depth = <4096>;
 			rx-fifo-depth = <4096>;
+			snps,axi-config = <&socfpga_axi_setup>;
 			status = "disabled";
 		};
 
@@ -596,6 +600,7 @@
 			snps,perfect-filter-entries = <128>;
 			tx-fifo-depth = <4096>;
 			rx-fifo-depth = <4096>;
+			snps,axi-config = <&socfpga_axi_setup>;
 			status = "disabled";
 		};
 
@@ -744,12 +749,12 @@
 			arm,prefetch-offset = <7>;
 		};
 
-		l3regs@0xff800000 {
+		l3regs@ff800000 {
 			compatible = "altr,l3regs", "syscon";
 			reg = <0xff800000 0x1000>;
 		};
 
-		mmc: dwmmc0@ff704000 {
+		mmc: mmc@ff704000 {
 			compatible = "altr,socfpga-dw-mshc";
 			reg = <0xff704000 0x1000>;
 			interrupts = <0 139 4>;
@@ -759,10 +764,11 @@
 			clocks = <&l4_mp_clk>, <&sdmmc_clk_divided>;
 			clock-names = "biu", "ciu";
 			resets = <&rst SDMMC_RESET>;
+			altr,sysmgr-syscon = <&sysmgr 0x108 3>;
 			status = "disabled";
 		};
 
-		nand0: nand@ff900000 {
+		nand0: nand-controller@ff900000 {
 			#address-cells = <0x1>;
 			#size-cells = <0x0>;
 			compatible = "altr,socfpga-denali-nand";
@@ -782,7 +788,7 @@
 		};
 
 		qspi: spi@ff705000 {
-			compatible = "cdns,qspi-nor";
+			compatible = "intel,socfpga-qspi", "cdns,qspi-nor";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0xff705000 0x1000>,
@@ -899,7 +905,7 @@
 			reset-names = "timer";
 		};
 
-		uart0: serial0@ffc02000 {
+		uart0: serial@ffc02000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0xffc02000 0x1000>;
 			interrupts = <0 162 4>;
@@ -912,7 +918,7 @@
 			resets = <&rst UART0_RESET>;
 		};
 
-		uart1: serial1@ffc03000 {
+		uart1: serial@ffc03000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0xffc03000 0x1000>;
 			interrupts = <0 163 4>;
diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi
index a574ea91d9d3..b108265e9bde 100644
--- a/arch/arm/boot/dts/socfpga_arria10.dtsi
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi
@@ -38,7 +38,7 @@
 		      <0xff113000 0x1000>;
 	};
 
-	intc: intc@ffffd000 {
+	intc: interrupt-controller@ffffd000 {
 		compatible = "arm,cortex-a9-gic";
 		#interrupt-cells = <3>;
 		interrupt-controller;
@@ -73,8 +73,6 @@
 					     <0 90 IRQ_TYPE_LEVEL_HIGH>,
 					     <0 91 IRQ_TYPE_LEVEL_HIGH>;
 				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
 				clocks = <&l4_main_clk>;
 				clock-names = "apb_pclk";
 				resets = <&rst DMA_RESET>, <&rst DMA_OCP_RESET>;
@@ -367,7 +365,6 @@
 						compatible = "altr,socfpga-a10-gate-clk";
 						clocks = <&sdmmc_free_clk>;
 						clk-gate = <0xC8 5>;
-						clk-phase = <0 135>;
 					};
 
 					qspi_clk: qspi_clk {
@@ -658,7 +655,7 @@
 			arm,shared-override;
 		};
 
-		mmc: dwmmc0@ff808000 {
+		mmc: mmc@ff808000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "altr,socfpga-dw-mshc";
@@ -668,10 +665,11 @@
 			clocks = <&l4_mp_clk>, <&sdmmc_clk>;
 			clock-names = "biu", "ciu";
 			resets = <&rst SDMMC_RESET>;
+			altr,sysmgr-syscon = <&sysmgr 0x28 4>;
 			status = "disabled";
 		};
 
-		nand: nand@ffb90000 {
+		nand: nand-controller@ffb90000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "altr,socfpga-denali-nand";
@@ -738,6 +736,16 @@
 					     <37 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
+			sdmmca-ecc@ff8c2c00 {
+				compatible = "altr,socfpga-sdmmc-ecc";
+				reg = <0xff8c2c00 0x400>;
+				altr,ecc-parent = <&mmc>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
+					     <47 IRQ_TYPE_LEVEL_HIGH>,
+					     <16 IRQ_TYPE_LEVEL_HIGH>,
+					     <48 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
 			dma-ecc@ff8c8000 {
 				compatible = "altr,socfpga-dma-ecc";
 				reg = <0xff8c8000 0x400>;
@@ -756,7 +764,7 @@
 		};
 
 		qspi: spi@ff809000 {
-			compatible = "cdns,qspi-nor";
+			compatible = "intel,socfpga-qspi", "cdns,qspi-nor";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0xff809000 0x100>,
@@ -837,7 +845,7 @@
 			reset-names = "timer";
 		};
 
-		uart0: serial0@ffc02000 {
+		uart0: serial@ffc02000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0xffc02000 0x100>;
 			interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
@@ -848,7 +856,7 @@
 			status = "disabled";
 		};
 
-		uart1: serial1@ffc02100 {
+		uart1: serial@ffc02100 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0xffc02100 0x100>;
 			interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_chameleonv3.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_chameleonv3.dts
new file mode 100644
index 000000000000..422d00cd4c74
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_chameleonv3.dts
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2022 Google LLC
+ */
+/dts-v1/;
+#include "socfpga_arria10_mercury_aa1.dtsi"
+
+/ {
+	model = "Google Chameleon V3";
+	compatible = "google,chameleon-v3", "enclustra,mercury-aa1",
+		     "altr,socfpga-arria10", "altr,socfpga";
+
+	aliases {
+		serial0 = &uart0;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+	};
+};
+
+&gmac0 {
+	status = "okay";
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	ssm2603: audio-codec@1a {
+		compatible = "adi,ssm2603";
+		reg = <0x1a>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	u80: gpio@21 {
+		compatible = "nxp,pca9535";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"SOM_AUD_MUTE",
+			"DP1_OUT_CEC_EN",
+			"DP2_OUT_CEC_EN",
+			"DP1_SOM_PS8469_CAD",
+			"DPD_SOM_PS8469_CAD",
+			"DP_OUT_PWR_EN",
+			"STM32_RST_L",
+			"STM32_BOOT0",
+
+			"FPGA_PROT",
+			"STM32_FPGA_COMM0",
+			"TP119",
+			"TP120",
+			"TP121",
+			"TP122",
+			"TP123",
+			"TP124";
+	};
+};
+
+&mmc {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1.dtsi
new file mode 100644
index 000000000000..c80201bce793
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1.dtsi
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2022 Google LLC
+ */
+
+#include "socfpga_arria10.dtsi"
+
+/ {
+
+	model = "Enclustra Mercury+ AA1";
+	compatible = "enclustra,mercury-aa1",
+		     "altr,socfpga-arria10", "altr,socfpga";
+
+	aliases {
+		ethernet0 = &gmac0;
+		serial1 = &uart1;
+		spi0 = &qspi;
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x80000000>; /* 2GB */
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+
+	/* Adjusted the i2c labels to use generic base-board dtsi files for
+	 * Enclustra Arria10 and Cyclone5 SoMs.
+	 *
+	 * The set of i2c0 and i2c1 labels defined in socfpga_cyclone5.dtsi and in
+	 * socfpga_arria10.dtsi do not allow for using the same base-board .dtsi
+	 * fragments. Thus define generic labels here to match the correct i2c
+	 * bus in a generic base-board .dtsi file.
+	 */
+	soc {
+		i2c_encl: i2c@ffc02300 {
+		};
+		i2c_encl_fpga: i2c@ffc02200 {
+		};
+	};
+};
+
+&i2c_encl {
+	status = "okay";
+	i2c-sda-hold-time-ns = <300>;
+	clock-frequency = <100000>;
+
+	atsha204a: crypto@64 {
+		compatible = "atmel,atsha204a";
+		reg = <0x64>;
+	};
+
+	isl12022: rtc@6f {
+		compatible = "isil,isl12022";
+		reg = <0x6f>;
+	};
+};
+
+&i2c_encl_fpga {
+	i2c-sda-hold-time-ns = <300>;
+	status = "disabled";
+};
+
+&gmac0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-addr = <0xffffffff>; /* probe for phy addr */
+	max-frame-size = <3800>;
+	phy-handle = <&phy3>;
+
+	/delete-property/ mac-address;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy3: ethernet-phy@3 {
+			reg = <3>;
+
+			/* Add 2ns RX clock delay (1.2ns + 0.78ns)*/
+			rxc-skew-ps = <1680>; /* 780ps */
+			rxd0-skew-ps = <420>; /* 0ps */
+			rxd1-skew-ps = <420>; /* 0ps */
+			rxd2-skew-ps = <420>; /* 0ps */
+			rxd3-skew-ps = <420>; /* 0ps */
+			rxdv-skew-ps = <420>; /* 0ps */
+
+			/* Add 1.38ns TX clock delay (0.96ns + 0.42ns)*/
+			txc-skew-ps = <1860>; /* 960ps */
+			txd0-skew-ps = <0>; /* -420ps */
+			txd1-skew-ps = <0>; /* -420ps */
+			txd2-skew-ps = <0>; /* -420ps */
+			txd3-skew-ps = <0>; /* -420ps */
+			txen-skew-ps = <0>; /* -420ps */
+		};
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "disabled";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+/* Following mappings are taken from arria10 socdk dts */
+&mmc {
+	status = "okay";
+	cap-sd-highspeed;
+	broken-cd;
+	bus-width = <4>;
+	clk-phase-sd-hs = <0>, <135>;
+};
+
+&osc1 {
+	clock-frequency = <33330000>;
+};
+
+&eccmgr {
+	sdmmca-ecc@ff8c2c00 {
+		compatible = "altr,socfpga-sdmmc-ecc";
+		reg = <0xff8c2c00 0x400>;
+		altr,ecc-parent = <&mmc>;
+		interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
+					 <47 IRQ_TYPE_LEVEL_HIGH>,
+					 <16 IRQ_TYPE_LEVEL_HIGH>,
+					 <48 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&qspi {
+	status = "okay";
+	flash0: flash@0 {
+		u-boot,dm-pre-reloc;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		spi-max-frequency = <10000000>;
+
+		cdns,read-delay = <4>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+
+		partition@raw {
+			label = "Flash Raw";
+			reg = <0x0 0x4000000>;
+		};
+	};
+};
+
+&watchdog1 {
+	status = "disabled";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe1_emmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe1_emmc.dts
new file mode 100644
index 000000000000..b6cca0b5fd09
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe1_emmc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_arria10_mercury_aa1.dtsi"
+#include "socfpga_enclustra_mercury_pe1.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_emmc.dtsi"
+
+/ {
+	model = "Enclustra Mercury SA1 on Mercury+ PE1 Base Board";
+	compatible = "enclustra,mercury-sa1-pe1", "enclustra,mercury-sa1",
+		     "altr,socfpga-cyclone5", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe1_qspi.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe1_qspi.dts
new file mode 100644
index 000000000000..6ad023477cd2
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe1_qspi.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_arria10_mercury_aa1.dtsi"
+#include "socfpga_enclustra_mercury_pe1.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_qspi.dtsi"
+
+/ {
+	model = "Enclustra Mercury+ AA1 on Mercury+ PE1 Base Board";
+	compatible = "enclustra,mercury-aa1-pe1", "enclustra,mercury-aa1",
+		     "altr,socfpga-arria10", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe1_sdmmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe1_sdmmc.dts
new file mode 100644
index 000000000000..653c9a86516b
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe1_sdmmc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_arria10_mercury_aa1.dtsi"
+#include "socfpga_enclustra_mercury_pe1.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_sdmmc.dtsi"
+
+/ {
+	model = "Enclustra Mercury+ AA1 on Mercury+ PE1 Base Board";
+	compatible = "enclustra,mercury-aa1-pe1", "enclustra,mercury-aa1",
+		     "altr,socfpga-arria10", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe3_emmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe3_emmc.dts
new file mode 100644
index 000000000000..ae9c7c6a2370
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe3_emmc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_arria10_mercury_aa1.dtsi"
+#include "socfpga_enclustra_mercury_pe3.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_emmc.dtsi"
+
+/ {
+	model = "Enclustra Mercury+ AA1 on Mercury+ PE3 Base Board";
+	compatible = "enclustra,mercury-aa1-pe3", "enclustra,mercury-aa1",
+		     "altr,socfpga-arria10", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe3_qspi.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe3_qspi.dts
new file mode 100644
index 000000000000..c3a0c30a07a5
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe3_qspi.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_arria10_mercury_aa1.dtsi"
+#include "socfpga_enclustra_mercury_pe3.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_qspi.dtsi"
+
+/ {
+	model = "Enclustra Mercury+ AA1 on Mercury+ PE3 Base Board";
+	compatible = "enclustra,mercury-aa1-pe3", "enclustra,mercury-aa1",
+		     "altr,socfpga-arria10", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe3_sdmmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe3_sdmmc.dts
new file mode 100644
index 000000000000..dc1e1ad20381
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe3_sdmmc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_arria10_mercury_aa1.dtsi"
+#include "socfpga_enclustra_mercury_pe3.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_sdmmc.dtsi"
+
+/ {
+	model = "Enclustra Mercury+ AA1 on Mercury+ PE3 Base Board";
+	compatible = "enclustra,mercury-aa1-pe3", "enclustra,mercury-aa1",
+		     "altr,socfpga-arria10", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_st1_emmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_st1_emmc.dts
new file mode 100644
index 000000000000..61d5e4c85d9b
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_st1_emmc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_arria10_mercury_aa1.dtsi"
+#include "socfpga_enclustra_mercury_st1.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_emmc.dtsi"
+
+/ {
+	model = "Enclustra Mercury+ AA1 on Mercury+ ST1 Base Board";
+	compatible = "enclustra,mercury-aa1-st1", "enclustra,mercury-aa1",
+		     "altr,socfpga-arria10", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_st1_qspi.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_st1_qspi.dts
new file mode 100644
index 000000000000..a3b99c9b16fd
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_st1_qspi.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_arria10_mercury_aa1.dtsi"
+#include "socfpga_enclustra_mercury_st1.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_qspi.dtsi"
+
+/ {
+	model = "Enclustra Mercury+ AA1 on Mercury+ ST1 Base Board";
+	compatible = "enclustra,mercury-aa1-st1", "enclustra,mercury-aa1",
+		     "altr,socfpga-arria10", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_st1_sdmmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_st1_sdmmc.dts
new file mode 100644
index 000000000000..5deb289e2b55
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_st1_sdmmc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_arria10_mercury_aa1.dtsi"
+#include "socfpga_enclustra_mercury_st1.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_sdmmc.dtsi"
+
+/ {
+	model = "Enclustra Mercury+ AA1 on Mercury+ ST1 Base Board";
+	compatible = "enclustra,mercury-aa1-st1", "enclustra,mercury-aa1",
+		     "altr,socfpga-arria10", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk.dtsi
index 7edebe20e859..ec7365444a3b 100644
--- a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk.dtsi
@@ -6,7 +6,7 @@
 
 / {
 	model = "Altera SOCFPGA Arria 10";
-	compatible = "altr,socfpga-arria10", "altr,socfpga";
+	compatible = "altr,socfpga-arria10-socdk", "altr,socfpga-arria10", "altr,socfpga";
 
 	aliases {
 		ethernet0 = &gmac0;
diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_nand.dts
index 9aa897b79544..a662df319a84 100644
--- a/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_nand.dts
@@ -16,11 +16,11 @@
 
 		partition@0 {
 			label = "Boot and fpga data";
-			reg = <0x0 0x02000000>;
+			reg = <0x0 0x02500000>;
 		};
 		partition@1c00000 {
 			label = "Root Filesystem - JFFS2";
-			reg = <0x02000000 0x06000000>;
+			reg = <0x02500000 0x05500000>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_qspi.dts
index 2b645642b935..0434f1c7b665 100644
--- a/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_qspi.dts
@@ -9,16 +9,14 @@
 &qspi {
 	status = "okay";
 
-	flash0: n25q00@0 {
+	flash0: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q00aa";
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <3>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_sdmmc.dts
index 64dc0799f3d7..d3969367f4b5 100644
--- a/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_sdmmc.dts
@@ -12,6 +12,7 @@
 	cap-mmc-highspeed;
 	broken-cd;
 	bus-width = <4>;
+	clk-phase-sd-hs = <0>, <135>;
 };
 
 &eccmgr {
diff --git a/arch/arm/boot/dts/socfpga_arria5.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_arria5.dtsi
index 22dbf07afcff..40fecde65c54 100644
--- a/arch/arm/boot/dts/socfpga_arria5.dtsi
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria5.dtsi
@@ -18,11 +18,12 @@
 			};
 		};
 
-		mmc0: dwmmc0@ff704000 {
+		mmc0: mmc@ff704000 {
 			broken-cd;
 			bus-width = <4>;
 			cap-mmc-highspeed;
 			cap-sd-highspeed;
+			clk-phase-sd-hs = <0>, <135>;
 		};
 
 		sysmgr@ffd08000 {
diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria5_socdk.dts
index 90e676e7019f..7342f5942b0d 100644
--- a/arch/arm/boot/dts/socfpga_arria5_socdk.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria5_socdk.dts
@@ -7,7 +7,7 @@
 
 / {
 	model = "Altera SOCFPGA Arria V SoC Development Kit";
-	compatible = "altr,socfpga-arria5", "altr,socfpga";
+	compatible = "altr,socfpga-arria5-socdk", "altr,socfpga-arria5", "altr,socfpga";
 
 	chosen {
 		bootargs = "earlyprintk";
@@ -29,28 +29,28 @@
 
 	leds {
 		compatible = "gpio-leds";
-		hps0 {
+		led-hps0 {
 			label = "hps_led0";
 			gpios = <&porta 0 1>;
 		};
 
-		hps1 {
+		led-hps1 {
 			label = "hps_led1";
 			gpios = <&portb 11 1>;
 		};
 
-		hps2 {
+		led-hps2 {
 			label = "hps_led2";
 			gpios = <&porta 17 1>;
 		};
 
-		hps3 {
+		led-hps3 {
 			label = "hps_led3";
 			gpios = <&porta 18 1>;
 		};
 	};
 
-	regulator_3_3v: 3-3-v-regulator {
+	regulator_3_3v: regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "3.3V";
 		regulator-min-microvolt = <3300000>;
@@ -119,13 +119,11 @@
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q256a";
+		compatible = "micron,n25q256a", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <4>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5.dtsi
index 319a71e41ea4..305fe207b237 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5.dtsi
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5.dtsi
@@ -18,11 +18,12 @@
 			};
 		};
 
-		mmc0: dwmmc0@ff704000 {
+		mmc0: mmc@ff704000 {
 			broken-cd;
 			bus-width = <4>;
 			cap-mmc-highspeed;
 			cap-sd-highspeed;
+			clk-phase-sd-hs = <0>, <135>;
 		};
 
 		sysmgr@ffd08000 {
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_chameleon96.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_chameleon96.dts
index f6561766d83f..76262f1e5e03 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_chameleon96.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_chameleon96.dts
@@ -24,7 +24,7 @@
 		reg = <0x0 0x20000000>; /* 512MB */
 	};
 
-	regulator_3_3v: 3-3-v-regulator {
+	regulator_3_3v: regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "3.3V";
 		regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_de0_nano_soc.dts
index 67076e1b1c7f..bedf577cb056 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_de0_nano_soc.dts
@@ -24,7 +24,7 @@
 		ethernet0 = &gmac1;
 	};
 
-	regulator_3_3v: 3-3-v-regulator {
+	regulator_3_3v: regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "3.3V";
 		regulator-min-microvolt = <3300000>;
@@ -33,7 +33,7 @@
 
 	leds {
 		compatible = "gpio-leds";
-		hps0 {
+		led-hps0 {
 			label = "hps_led0";
 			gpios = <&portb 24 0>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_de10nano.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_de10nano.dts
new file mode 100644
index 000000000000..ec25106caacf
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_de10nano.dts
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017, Intel Corporation
+ *
+ * based on socfpga_cyclone5_de0_nano_soc.dts
+ */
+/dts-v1/;
+
+#include "socfpga_cyclone5.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Terasic DE10-Nano";
+	compatible = "terasic,de10-nano", "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		/* 1 GiB */
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	soc {
+		fpga: bus@ff200000 {
+			compatible = "simple-bus";
+			reg = <0xff200000 0x00200000>;
+			ranges = <0x00000000 0xff200000 0x00200000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			/*
+			 * Here the devices will appear if an FPGA image is
+			 * loaded. Their description is expected to be added
+			 * using a device tree overlay that matches the image.
+			 */
+		};
+	};
+};
+
+&gmac1 {
+	/* Uses a KSZ9031RNX phy */
+	phy-mode = "rgmii-id";
+	rxd0-skew-ps = <420>;
+	rxd1-skew-ps = <420>;
+	rxd2-skew-ps = <420>;
+	rxd3-skew-ps = <420>;
+	txen-skew-ps = <0>;
+	rxdv-skew-ps = <420>;
+	status = "okay";
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	accelerometer@53 {
+		compatible = "adi,adxl345";
+		reg = <0x53>;
+		/* HPS_GSENSOR_INT is routed to UART0_RX/CAN0_RX/SPIM0_SS1/HPS_GPIO61 */
+		interrupt-parent = <&portc>;
+		interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "INT1";
+	};
+};
+
+&mmc0 {
+	/* micro SD card socket J11 */
+	status = "okay";
+};
+
+&uart0 {
+	/*
+	 * Accessible via USB (FT232R) on Mini-USB plug J4
+	 * RX = TRACE_D0/SPIS0_CLK/UART0_RX/HPS_GPIO49
+	 * TX = TRACE_D1/SPIS0_MOSI/UART0_TX/HPS_GPIO50
+	 * no handshaking lines
+	 */
+	clock-frequency = <100000000>;
+};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mcv.dtsi
index bd92806ffc12..3b9daddf91cd 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mcv.dtsi
@@ -18,5 +18,6 @@
 
 &mmc0 {	/* On-SoM eMMC */
 	bus-width = <8>;
+	clk-phase-sd-hs = <0>, <135>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mcvevk.dts
index ceaec29770c6..c1e1264bcb09 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mcvevk.dts
@@ -50,8 +50,6 @@
 
 	stmpe1: stmpe811@41 {
 		compatible = "st,stmpe811";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <0x41>;
 		id = <0>;
 		blocks = <0x5>;
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1.dtsi
new file mode 100644
index 000000000000..49944f9632f9
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1.dtsi
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+	model = "Enclustra Mercury SA1";
+	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		ethernet0 = &gmac1;
+	};
+
+	/* Adjusted the i2c labels to use generic base-board dtsi files for
+	 * Enclustra Arria10 and Cyclone5 SoMs.
+	 *
+	 * The set of i2c0 and i2c1 labels defined in socfpga_cyclone5.dtsi and in
+	 * socfpga_arria10.dtsi do not allow for using the same base-board .dtsi
+	 * fragments. Thus define generic labels here to match the correct i2c
+	 * bus in a generic base-board .dtsi file.
+	 */
+	soc {
+		i2c_encl: i2c@ffc04000 {
+		};
+		i2c_encl_fpga: i2c@ffc05000 {
+		};
+	};
+
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+};
+
+&osc1 {
+	clock-frequency = <50000000>;
+};
+
+&i2c_encl {
+	i2c-sda-hold-time-ns = <300>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	isl12020: rtc@6f {
+		compatible = "isil,isl12022";
+		reg = <0x6f>;
+	};
+};
+
+&i2c_encl_fpga {
+	i2c-sda-hold-time-ns = <300>;
+	status = "disabled";
+};
+
+&uart0 {
+	clock-frequency = <100000000>;
+};
+
+&mmc0 {
+	status = "okay";
+	/delete-property/ cap-mmc-highspeed;
+	/delete-property/ cap-sd-highspeed;
+};
+
+&qspi {
+	status = "okay";
+
+	flash0: flash@0 {
+		u-boot,dm-pre-reloc;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		spi-max-frequency = <10000000>;
+
+		cdns,read-delay = <4>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+
+		partition@raw {
+			label = "Flash Raw";
+			reg = <0x0 0x4000000>;
+		};
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gmac1 {
+	status = "okay";
+	/delete-property/ mac-address;
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy3>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		phy3: ethernet-phy@3 {
+			reg = <3>;
+
+			/* Add 2ns RX clock delay (1.2ns + 0.78ns)*/
+			rxc-skew-ps = <1680>;
+			rxd0-skew-ps = <420>;
+			rxd1-skew-ps = <420>;
+			rxd2-skew-ps = <420>;
+			rxd3-skew-ps = <420>;
+			rxdv-skew-ps = <420>;
+
+			/* Add 1.38ns TX clock delay (0.96ns + 0.42ns)*/
+			txc-skew-ps = <1860>;
+			txd0-skew-ps = <0>;
+			txd1-skew-ps = <0>;
+			txd2-skew-ps = <0>;
+			txd3-skew-ps = <0>;
+			txen-skew-ps = <0>;
+		};
+	};
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe1_emmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe1_emmc.dts
new file mode 100644
index 000000000000..85d6146da0da
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe1_emmc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_cyclone5_mercury_sa1.dtsi"
+#include "socfpga_enclustra_mercury_pe1.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_emmc.dtsi"
+
+/ {
+	model = "Enclustra Mercury SA1 on Mercury+ PE1 Base Board";
+	compatible = "enclustra,mercury-sa1-pe1", "enclustra,mercury-aa1",
+		     "altr,socfpga-arria10", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe1_qspi.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe1_qspi.dts
new file mode 100644
index 000000000000..770ab680a18c
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe1_qspi.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_cyclone5_mercury_sa1.dtsi"
+#include "socfpga_enclustra_mercury_pe1.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_qspi.dtsi"
+
+/ {
+	model = "Enclustra Mercury SA1 on Mercury+ PE1 Base Board";
+	compatible = "enclustra,mercury-sa1-pe1", "enclustra,mercury-sa1",
+		     "altr,socfpga-cyclone5", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe1_sdmmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe1_sdmmc.dts
new file mode 100644
index 000000000000..990ca0fec61e
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe1_sdmmc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_cyclone5_mercury_sa1.dtsi"
+#include "socfpga_enclustra_mercury_pe1.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_sdmmc.dtsi"
+
+/ {
+	model = "Enclustra Mercury SA1 on Mercury+ PE1 Base Board";
+	compatible = "enclustra,mercury-sa1-pe1", "enclustra,mercury-sa1",
+		     "altr,socfpga-cyclone5", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe3_emmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe3_emmc.dts
new file mode 100644
index 000000000000..6c8fd5b0d6eb
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe3_emmc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_cyclone5_mercury_sa1.dtsi"
+#include "socfpga_enclustra_mercury_pe3.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_emmc.dtsi"
+
+/ {
+	model = "Enclustra Mercury SA1 on Mercury+ PE3 Base Board";
+	compatible = "enclustra,mercury-sa1-pe3", "enclustra,mercury-sa1",
+		     "altr,socfpga-cyclone5", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe3_qspi.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe3_qspi.dts
new file mode 100644
index 000000000000..3292426078a1
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe3_qspi.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_cyclone5_mercury_sa1.dtsi"
+#include "socfpga_enclustra_mercury_pe3.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_qspi.dtsi"
+
+/ {
+	model = "Enclustra Mercury SA1 on Mercury+ PE3 Base Board";
+	compatible = "enclustra,mercury-sa1-pe3", "enclustra,mercury-sa1",
+		     "altr,socfpga-cyclone5", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe3_sdmmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe3_sdmmc.dts
new file mode 100644
index 000000000000..1eb10b5244dd
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe3_sdmmc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_cyclone5_mercury_sa1.dtsi"
+#include "socfpga_enclustra_mercury_pe3.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_sdmmc.dtsi"
+
+/ {
+	model = "Enclustra Mercury SA1 on Mercury+ PE3 Base Board";
+	compatible = "enclustra,mercury-sa1-pe3", "enclustra,mercury-sa1",
+		     "altr,socfpga-cyclone5", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_st1_emmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_st1_emmc.dts
new file mode 100644
index 000000000000..8c97b5b3adea
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_st1_emmc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_cyclone5_mercury_sa1.dtsi"
+#include "socfpga_enclustra_mercury_st1.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_emmc.dtsi"
+
+/ {
+	model = "Enclustra Mercury SA1 on Mercury+ ST1 Base Board";
+	compatible = "enclustra,mercury-sa1-st1", "enclustra,mercury-sa1",
+		     "altr,socfpga-cyclone5", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_st1_qspi.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_st1_qspi.dts
new file mode 100644
index 000000000000..e6d14b22e41d
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_st1_qspi.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_cyclone5_mercury_sa1.dtsi"
+#include "socfpga_enclustra_mercury_st1.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_qspi.dtsi"
+
+/ {
+	model = "Enclustra Mercury SA1 on Mercury+ ST1 Base Board";
+	compatible = "enclustra,mercury-sa1-st1", "enclustra,mercury-sa1",
+		     "altr,socfpga-cyclone5", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_st1_sdmmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_st1_sdmmc.dts
new file mode 100644
index 000000000000..beaeca94d4df
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_st1_sdmmc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_cyclone5_mercury_sa1.dtsi"
+#include "socfpga_enclustra_mercury_st1.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_sdmmc.dtsi"
+
+/ {
+	model = "Enclustra Mercury SA1 on Mercury+ ST1 Base Board";
+	compatible = "enclustra,mercury-sa1-st1", "enclustra,mercury-sa1",
+		     "altr,socfpga-cyclone5", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2.dtsi
new file mode 100644
index 000000000000..0b28964e0378
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2.dtsi
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+	model = "Enclustra Mercury+ SA2";
+	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		ethernet0 = &gmac1;
+	};
+
+	/* Adjusted the i2c labels to use generic base-board dtsi files for
+	 * Enclustra Arria10 and Cyclone5 SoMs.
+	 *
+	 * The set of i2c0 and i2c1 labels defined in socfpga_cyclone5.dtsi and in
+	 * socfpga_arria10.dtsi do not allow for using the same base-board .dtsi
+	 * fragments. Thus define generic labels here to match the correct i2c
+	 * bus in a generic base-board .dtsi file.
+	 */
+	soc {
+		i2c_encl: i2c@ffc04000 {
+		};
+		i2c_encl_fpga: i2c@ffc05000 {
+		};
+	};
+
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x80000000>; /* 2GB */
+	};
+};
+
+&osc1 {
+	clock-frequency = <50000000>;
+};
+
+&i2c_encl {
+	i2c-sda-hold-time-ns = <300>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	isl12020: rtc@6f {
+		compatible = "isil,isl12022";
+		reg = <0x6f>;
+	};
+
+	atsha204a: crypto@64 {
+		compatible = "atmel,atsha204a";
+		reg = <0x64>;
+	};
+};
+
+&i2c_encl_fpga {
+	i2c-sda-hold-time-ns = <300>;
+	status = "disabled";
+};
+
+&uart0 {
+	clock-frequency = <100000000>;
+};
+
+&mmc0 {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+
+	flash0: flash@0 {
+		u-boot,dm-pre-reloc;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		spi-max-frequency = <10000000>;
+
+		cdns,read-delay = <4>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+
+		partition@raw {
+			label = "Flash Raw";
+			reg = <0x0 0x4000000>;
+		};
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gmac1 {
+	status = "okay";
+	/delete-property/ mac-address;
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy3>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		phy3: ethernet-phy@3 {
+			reg = <3>;
+
+			/* Add 2ns RX clock delay (1.2ns + 0.78ns)*/
+			rxc-skew-ps = <1680>;
+			rxd0-skew-ps = <420>;
+			rxd1-skew-ps = <420>;
+			rxd2-skew-ps = <420>;
+			rxd3-skew-ps = <420>;
+			rxdv-skew-ps = <420>;
+
+			/* Add 1.38ns TX clock delay (0.96ns + 0.42ns)*/
+			txc-skew-ps = <1860>;
+			txd0-skew-ps = <0>;
+			txd1-skew-ps = <0>;
+			txd2-skew-ps = <0>;
+			txd3-skew-ps = <0>;
+			txen-skew-ps = <0>;
+		};
+	};
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe1_qspi.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe1_qspi.dts
new file mode 100644
index 000000000000..6f79d9ed1d36
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe1_qspi.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_cyclone5_mercury_sa2.dtsi"
+#include "socfpga_enclustra_mercury_pe1.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_qspi.dtsi"
+
+/ {
+	model = "Enclustra Mercury+ SA2 on Mercury+ PE1 Base Board";
+	compatible = "enclustra,mercury-sa2-pe1", "enclustra,mercury-sa2",
+		     "altr,socfpga-cyclone5", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe1_sdmmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe1_sdmmc.dts
new file mode 100644
index 000000000000..b94bd8bafc26
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe1_sdmmc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_cyclone5_mercury_sa2.dtsi"
+#include "socfpga_enclustra_mercury_pe1.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_sdmmc.dtsi"
+
+/ {
+	model = "Enclustra Mercury+ SA2 on Mercury+ PE1 Base Board";
+	compatible = "enclustra,mercury-sa2-pe1", "enclustra,mercury-sa2",
+		     "altr,socfpga-cyclone5", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe3_qspi.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe3_qspi.dts
new file mode 100644
index 000000000000..51fc4a22937a
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe3_qspi.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_cyclone5_mercury_sa2.dtsi"
+#include "socfpga_enclustra_mercury_pe3.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_qspi.dtsi"
+
+/ {
+	model = "Enclustra Mercury+ SA2 on Mercury+ PE3 Base Board";
+	compatible = "enclustra,mercury-sa2-pe3", "enclustra,mercury-sa2",
+		     "altr,socfpga-cyclone5", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe3_sdmmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe3_sdmmc.dts
new file mode 100644
index 000000000000..e4209209f4fa
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe3_sdmmc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_cyclone5_mercury_sa2.dtsi"
+#include "socfpga_enclustra_mercury_pe3.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_sdmmc.dtsi"
+
+/ {
+	model = "Enclustra Mercury+ SA2 on Mercury+ PE3 Base Board";
+	compatible = "enclustra,mercury-sa2-pe3", "enclustra,mercury-sa2",
+		     "altr,socfpga-cyclone5", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_st1_qspi.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_st1_qspi.dts
new file mode 100644
index 000000000000..ab4549a0d455
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_st1_qspi.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_cyclone5_mercury_sa2.dtsi"
+#include "socfpga_enclustra_mercury_st1.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_qspi.dtsi"
+
+/ {
+	model = "Enclustra Mercury+ SA2 on Mercury+ ST1 Base Board";
+	compatible = "enclustra,mercury-sa2-st1", "enclustra,mercury-sa2",
+		     "altr,socfpga-cyclone5", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_st1_sdmmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_st1_sdmmc.dts
new file mode 100644
index 000000000000..ebe62879c3fb
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_st1_sdmmc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+/dts-v1/;
+
+#include "socfpga_cyclone5_mercury_sa2.dtsi"
+#include "socfpga_enclustra_mercury_st1.dtsi"
+#include "socfpga_enclustra_mercury_bootmode_sdmmc.dtsi"
+
+/ {
+	model = "Enclustra Mercury+ SA2 on Mercury+ ST1 Base Board";
+	compatible = "enclustra,mercury-sa2-st1", "enclustra,mercury-sa2",
+		     "altr,socfpga-cyclone5", "altr,socfpga";
+};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_socdk.dts
index 6f138b2b2616..97622febc44e 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_socdk.dts
@@ -29,28 +29,28 @@
 
 	leds {
 		compatible = "gpio-leds";
-		hps0 {
+		led-hps0 {
 			label = "hps_led0";
 			gpios = <&portb 15 1>;
 		};
 
-		hps1 {
+		led-hps1 {
 			label = "hps_led1";
 			gpios = <&portb 14 1>;
 		};
 
-		hps2 {
+		led-hps2 {
 			label = "hps_led2";
 			gpios = <&portb 13 1>;
 		};
 
-		hps3 {
+		led-hps3 {
 			label = "hps_led3";
 			gpios = <&portb 12 1>;
 		};
 	};
 
-	regulator_3_3v: 3-3-v-regulator {
+	regulator_3_3v: regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "3.3V";
 		regulator-min-microvolt = <3300000>;
@@ -121,16 +121,14 @@
 &qspi {
 	status = "okay";
 
-	flash0: n25q00@0 {
+	flash0: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q00";
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <0>;	/* chip select */
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <4>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
@@ -153,12 +151,6 @@
 
 &spi0 {
 	status = "okay";
-
-	spidev@0 {
-		compatible = "rohm,dh2228fv";
-		reg = <0>;
-		spi-max-frequency = <1000000>;
-	};
 };
 
 &usb1 {
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sockit.dts
index c155ff02eb6e..9e4db7407f1a 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sockit.dts
@@ -111,7 +111,7 @@
 		};
 	};
 
-	regulator_3_3v: vcc3p3-regulator {
+	regulator_3_3v: regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC3P3";
 		regulator-min-microvolt = <3300000>;
@@ -169,13 +169,11 @@
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q00";
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <4>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_socrates.dts
index 8d5d3996f6f2..ca18b959e655 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_socrates.dts
@@ -80,7 +80,7 @@
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q256a";
+		compatible = "micron,n25q256a", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 		m25p,fast-read;
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts
index 99a71757cdf4..e4794ccb8e41 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts
@@ -26,7 +26,7 @@
 		ethernet0 = &gmac1;
 	};
 
-	regulator_3_3v: 3-3-v-regulator {
+	regulator_3_3v: regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "3.3V";
 		regulator-min-microvolt = <3300000>;
@@ -66,8 +66,10 @@
 	mdio0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		phy0: ethernet-phy@0 {
-			reg = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		phy0: ethernet-phy@4 {
+			reg = <4>;
 			rxd0-skew-ps = <0>;
 			rxd1-skew-ps = <0>;
 			rxd2-skew-ps = <0>;
@@ -113,16 +115,14 @@
 &qspi {
 	status = "okay";
 
-	flash0: n25q512a@0 {
+	flash0: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q512a";
+		compatible = "micron,n25q512a", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <4>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts
index a060718758b6..170c1ae441a6 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts
@@ -130,18 +130,18 @@
 		#gpio-cells = <2>;
 	};
 
-	temp: lm75@48 {
-		compatible = "lm75";
+	temp: temperature-sensor@48 {
+		compatible = "national,lm75";
 		reg = <0x48>;
 	};
 
-	at24@50 {
+	eeprom@50 {
 		compatible = "atmel,24c01";
 		pagesize = <8>;
 		reg = <0x50>;
 	};
 
-	i2cswitch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -211,7 +211,7 @@
 	status = "okay";
 	clock-frequency = <100000>;
 
-	at24@50 {
+	eeprom@50 {
 		compatible = "atmel,24c02";
 		pagesize = <8>;
 		reg = <0x50>;
@@ -221,16 +221,14 @@
 &qspi {
 	status = "okay";
 
-	n25q128@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q128";
+		compatible = "micron,n25q128", "jedec,spi-nor";
 		reg = <0>;		/* chip select */
 		spi-max-frequency = <100000000>;
 		m25p,fast-read;
 
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <4>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
@@ -238,16 +236,14 @@
 		cdns,tslch-ns = <4>;
 	};
 
-	n25q00@1 {
+	flash@1 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q00";
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <1>;		/* chip select */
 		spi-max-frequency = <100000000>;
 		m25p,fast-read;
 
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <4>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_bootmode_emmc.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_bootmode_emmc.dtsi
new file mode 100644
index 000000000000..d79cb64da0de
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_bootmode_emmc.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+&qspi {
+	status = "disabled";
+};
+
+&mmc {
+	bus-width = <8>;
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_bootmode_qspi.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_bootmode_qspi.dtsi
new file mode 100644
index 000000000000..5ba21dd8f5ba
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_bootmode_qspi.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+&mmc {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_bootmode_sdmmc.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_bootmode_sdmmc.dtsi
new file mode 100644
index 000000000000..2b102e0b6217
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_bootmode_sdmmc.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+&qspi {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_pe1.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_pe1.dtsi
new file mode 100644
index 000000000000..abc4bfb7fccf
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_pe1.dtsi
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+&i2c_encl {
+	status = "okay";
+
+	eeprom@57 {
+		status = "okay";
+		compatible = "microchip,24c128";
+		reg = <0x57>;
+		pagesize = <64>;
+		label = "user eeprom";
+		address-width = <16>;
+	};
+
+	lm96080: temperature-sensor@2f {
+		status = "okay";
+		compatible = "national,lm80";
+		reg = <0x2f>;
+	};
+
+	si5338: clock-controller@70 {
+		compatible = "silabs,si5338";
+		reg = <0x70>;
+	};
+
+};
+
+&i2c_encl_fpga {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_pe3.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_pe3.dtsi
new file mode 100644
index 000000000000..bc57b0680878
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_pe3.dtsi
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+&i2c_encl {
+	i2c-mux@74 {
+		status = "okay";
+		compatible = "nxp,pca9547";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@56 {
+				status = "okay";
+				compatible = "microchip,24c128";
+				reg = <0x56>;
+				pagesize = <64>;
+				label = "user eeprom";
+				address-width = <16>;
+			};
+
+			lm96080: temperature-sensor@2f {
+				status = "okay";
+				compatible = "national,lm80";
+				reg = <0x2f>;
+			};
+
+			pcal6416: gpio@20 {
+				status = "okay";
+				compatible = "nxp,pcal6416";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+	};
+};
+
+&i2c_encl_fpga {
+	status = "okay";
+
+	i2c-mux@75 {
+		status = "okay";
+		compatible = "nxp,pca9547";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+	};
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_st1.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_st1.dtsi
new file mode 100644
index 000000000000..4c00475f4303
--- /dev/null
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_st1.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com
+ */
+
+&i2c_encl {
+	si5338: clock-controller@70 {
+		compatible = "silabs,si5338";
+		reg = <0x70>;
+	};
+};
+
+&i2c_encl_fpga {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/socfpga_vt.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_vt.dts
index a77846f73b34..845ab2cc5ce6 100644
--- a/arch/arm/boot/dts/socfpga_vt.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_vt.dts
@@ -29,7 +29,7 @@
 			};
 		};
 
-		dwmmc0@ff704000 {
+		mmc@ff704000 {
 			broken-cd;
 			bus-width = <4>;
 			cap-mmc-highspeed;
@@ -57,11 +57,11 @@
 			clock-frequency = <7000000>;
 		};
 
-		serial0@ffc02000 {
+		serial@ffc02000 {
 			clock-frequency = <7372800>;
 		};
 
-		serial1@ffc03000 {
+		serial@ffc03000 {
 			clock-frequency = <7372800>;
 		};
 
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6192.dts b/arch/arm/boot/dts/kirkwood-rd88f6192.dts
deleted file mode 100644
index 712d6042b132..000000000000
--- a/arch/arm/boot/dts/kirkwood-rd88f6192.dts
+++ /dev/null
@@ -1,106 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Marvell RD88F6192 Board descrition
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * This file contains the definitions that are common between the three
- * variants of the Marvell Kirkwood Development Board.
- */
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6192.dtsi"
-
-/ {
-	model = "Marvell RD88F6192 reference design";
-	compatible = "marvell,rd88f6192", "marvell,kirkwood-88f6192", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pinctrl-0 = <&pmx_usb_power>;
-			pinctrl-names = "default";
-
-                        pmx_usb_power: pmx-usb-power {
-                                marvell,pins = "mpp10";
-                                marvell,function = "gpo";
-                        };
-		};
-
-		serial@12000 {
-			status = "okay";
-
-		};
-
-		spi@10600 {
-			status = "okay";
-
-			m25p128@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "st,m25p128", "jedec,spi-nor";
-				reg = <0>;
-				spi-max-frequency = <20000000>;
-				mode = <0>;
-			};
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <2>;
-		};
-	};
-
-	regulators {
-                compatible = "simple-bus";
-                #address-cells = <1>;
-                #size-cells = <0>;
-                pinctrl-0 = <&pmx_usb_power>;
-                pinctrl-names = "default";
-
-                usb_power: regulator@0 {
-                        compatible = "regulator-fixed";
-                        reg = <0>;
-                        regulator-name = "USB VBUS";
-                        regulator-min-microvolt = <5000000>;
-                        regulator-max-microvolt = <5000000>;
-                        enable-active-high;
-                        regulator-always-on;
-                        regulator-boot-on;
-                        gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>;
-                };
-	};
-};
-
-&mdio {
-        status = "okay";
-
-        ethphy0: ethernet-phy@8 {
-                reg = <8>;
-        };
-};
-
-&eth0 {
-        status = "okay";
-        ethernet0-port@0 {
-                phy-handle = <&ethphy0>;
-        };
-};
-
-&pciec {
-        status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts
deleted file mode 100644
index 2a0a98fe67f0..000000000000
--- a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts
+++ /dev/null
@@ -1,13 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-/dts-v1/;
-
-#include "omap34xx.dtsi"
-#include "logicpd-som-lv.dtsi"
-#include "logicpd-som-lv-baseboard.dtsi"
-#include "omap-gpmc-smsc9221.dtsi"
-
-/ {
-	model = "LogicPD Zoom OMAP35xx SOM-LV Development Kit";
-	compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3430", "ti,omap3";
-};
diff --git a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
deleted file mode 100644
index a604d92221a4..000000000000
--- a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
+++ /dev/null
@@ -1,13 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-/dts-v1/;
-
-#include "omap36xx.dtsi"
-#include "logicpd-som-lv.dtsi"
-#include "logicpd-som-lv-baseboard.dtsi"
-#include "omap-gpmc-smsc9221.dtsi"
-
-/ {
-	model = "LogicPD Zoom DM3730 SOM-LV Development Kit";
-	compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3";
-};
diff --git a/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts
deleted file mode 100644
index 57bae2aa910e..000000000000
--- a/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts
+++ /dev/null
@@ -1,13 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-/dts-v1/;
-
-#include "omap34xx.dtsi"
-#include "logicpd-torpedo-som.dtsi"
-#include "logicpd-torpedo-baseboard.dtsi"
-#include "omap-gpmc-smsc9221.dtsi"
-
-/ {
-	model = "LogicPD Zoom OMAP35xx Torpedo Development Kit";
-	compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3430", "ti,omap3";
-};
diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts
deleted file mode 100644
index 74a67604876c..000000000000
--- a/arch/arm/boot/dts/ls1021a-qds.dts
+++ /dev/null
@@ -1,361 +0,0 @@
-/*
- * Copyright 2013-2014 Freescale Semiconductor, Inc.
- * Copyright 2018 NXP
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "ls1021a.dtsi"
-
-/ {
-	model = "LS1021A QDS Board";
-	compatible = "fsl,ls1021a-qds", "fsl,ls1021a";
-
-	aliases {
-		enet0_rgmii_phy = &rgmii_phy1;
-		enet1_rgmii_phy = &rgmii_phy2;
-		enet2_rgmii_phy = &rgmii_phy3;
-		enet0_sgmii_phy = &sgmii_phy1c;
-		enet1_sgmii_phy = &sgmii_phy1d;
-	};
-
-	sys_mclk: clock-mclk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24576000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,widgets =
-			"Microphone", "Microphone Jack",
-			"Headphone", "Headphone Jack",
-			"Speaker", "Speaker Ext",
-			"Line", "Line In Jack";
-		simple-audio-card,routing =
-			"MIC_IN", "Microphone Jack",
-			"Microphone Jack", "Mic Bias",
-			"LINE_IN", "Line In Jack",
-			"Headphone Jack", "HP_OUT",
-			"Speaker Ext", "LINE_OUT";
-
-		simple-audio-card,cpu {
-			sound-dai = <&sai2>;
-			frame-master;
-			bitclock-master;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&codec>;
-			frame-master;
-			bitclock-master;
-		};
-	};
-};
-
-&dspi0 {
-	bus-num = <0>;
-	status = "okay";
-
-	dspiflash: at45db021d@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "atmel,at45db021d", "atmel,at45", "atmel,dataflash";
-		spi-max-frequency = <16000000>;
-		spi-cpol;
-		spi-cpha;
-		reg = <0>;
-	};
-};
-
-&enet0 {
-	tbi-handle = <&tbi0>;
-	phy-handle = <&sgmii_phy1c>;
-	phy-connection-type = "sgmii";
-	status = "okay";
-};
-
-&enet1 {
-	tbi-handle = <&tbi0>;
-	phy-handle = <&sgmii_phy1d>;
-	phy-connection-type = "sgmii";
-	status = "okay";
-};
-
-&enet2 {
-	phy-handle = <&rgmii_phy3>;
-	phy-connection-type = "rgmii-id";
-	status = "okay";
-};
-
-&esdhc {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-
-	pca9547: mux@77 {
-		compatible = "nxp,pca9547";
-		reg = <0x77>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x0>;
-
-			ds3232: rtc@68 {
-				compatible = "dallas,ds3232";
-				reg = <0x68>;
-				interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x2>;
-
-			ina220@40 {
-				compatible = "ti,ina220";
-				reg = <0x40>;
-				shunt-resistor = <1000>;
-			};
-
-			ina220@41 {
-				compatible = "ti,ina220";
-				reg = <0x41>;
-				shunt-resistor = <1000>;
-			};
-		};
-
-		i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x3>;
-
-			eeprom@56 {
-				compatible = "atmel,24c512";
-				reg = <0x56>;
-			};
-
-			eeprom@57 {
-				compatible = "atmel,24c512";
-				reg = <0x57>;
-			};
-
-			adt7461a@4c {
-				compatible = "adi,adt7461a";
-				reg = <0x4c>;
-			};
-		};
-
-		i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x4>;
-
-			codec: sgtl5000@2a {
-				#sound-dai-cells = <0>;
-				compatible = "fsl,sgtl5000";
-				reg = <0x2a>;
-				VDDA-supply = <&reg_3p3v>;
-				VDDIO-supply = <&reg_3p3v>;
-				clocks = <&sys_mclk>;
-			};
-		};
-	};
-};
-
-&ifc {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	/* NOR, NAND Flashes and FPGA on board */
-	ranges = <0x0 0x0 0x0 0x60000000 0x08000000
-		  0x2 0x0 0x0 0x7e800000 0x00010000
-		  0x3 0x0 0x0 0x7fb00000 0x00000100>;
-	status = "okay";
-
-	nor@0,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "cfi-flash";
-		reg = <0x0 0x0 0x8000000>;
-		big-endian;
-		bank-width = <2>;
-		device-width = <1>;
-	};
-
-	nand@2,0 {
-		compatible = "fsl,ifc-nand";
-		reg = <0x2 0x0 0x10000>;
-	};
-
-	fpga: board-control@3,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		reg = <0x3 0x0 0x0000100>;
-		bank-width = <1>;
-		device-width = <1>;
-		ranges = <0 3 0 0x100>;
-
-		mdio-mux-emi1 {
-			compatible = "mdio-mux-mmioreg";
-			mdio-parent-bus = <&mdio0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x54 1>; /* BRDCFG4 */
-			mux-mask = <0xe0>; /* EMI1[2:0] */
-
-			/* Onboard PHYs */
-			ls1021amdio0: mdio@0 {
-				reg = <0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				rgmii_phy1: ethernet-phy@1 {
-					reg = <0x1>;
-				};
-			};
-
-			ls1021amdio1: mdio@20 {
-				reg = <0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				rgmii_phy2: ethernet-phy@2 {
-					reg = <0x2>;
-				};
-			};
-
-			ls1021amdio2: mdio@40 {
-				reg = <0x40>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				rgmii_phy3: ethernet-phy@3 {
-					reg = <0x3>;
-				};
-			};
-
-			ls1021amdio3: mdio@60 {
-				reg = <0x60>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				sgmii_phy1c: ethernet-phy@1c {
-					reg = <0x1c>;
-				};
-			};
-
-			ls1021amdio4: mdio@80 {
-				reg = <0x80>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				sgmii_phy1d: ethernet-phy@1d {
-					reg = <0x1d>;
-				};
-			};
-		};
-	};
-};
-
-&lpuart0 {
-	status = "okay";
-};
-
-&mdio0 {
-	tbi0: tbi-phy@8 {
-		reg = <0x8>;
-		device_type = "tbi-phy";
-	};
-};
-
-&sai2 {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&can0 {
-	status = "okay";
-};
-
-&can1 {
-	status = "okay";
-};
-
-&can2 {
-	status = "disabled";
-};
-
-&can3 {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts
deleted file mode 100644
index 5edf001f6138..000000000000
--- a/arch/arm/boot/dts/ls1021a-twr.dts
+++ /dev/null
@@ -1,289 +0,0 @@
-/*
- * Copyright 2013-2014 Freescale Semiconductor, Inc.
- * Copyright 2018 NXP
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "ls1021a.dtsi"
-
-/ {
-	model = "LS1021A TWR Board";
-	compatible = "fsl,ls1021a-twr", "fsl,ls1021a";
-
-	aliases {
-		enet2_rgmii_phy = &rgmii_phy1;
-		enet0_sgmii_phy = &sgmii_phy2;
-		enet1_sgmii_phy = &sgmii_phy0;
-	};
-
-	sys_mclk: clock-mclk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24576000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,widgets =
-			"Microphone", "Microphone Jack",
-			"Headphone", "Headphone Jack",
-			"Speaker", "Speaker Ext",
-			"Line", "Line In Jack";
-		simple-audio-card,routing =
-			"MIC_IN", "Microphone Jack",
-			"Microphone Jack", "Mic Bias",
-			"LINE_IN", "Line In Jack",
-			"Headphone Jack", "HP_OUT",
-			"Speaker Ext", "LINE_OUT";
-
-		simple-audio-card,cpu {
-			sound-dai = <&sai1>;
-			frame-master;
-			bitclock-master;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&codec>;
-			frame-master;
-			bitclock-master;
-		};
-	};
-
-	panel: panel {
-		compatible = "nec,nl4827hc19-05b";
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&dcu_out>;
-			};
-		};
-	};
-};
-
-&dcu {
-	status = "okay";
-
-	port {
-		dcu_out: endpoint {
-			remote-endpoint = <&panel_in>;
-		};
-	};
-};
-
-&dspi1 {
-	bus-num = <0>;
-	status = "okay";
-
-	dspiflash: s25fl064k@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "spansion,s25fl064k";
-		spi-max-frequency = <16000000>;
-		spi-cpol;
-		spi-cpha;
-		reg = <0>;
-	};
-};
-
-&enet0 {
-	tbi-handle = <&tbi0>;
-	phy-handle = <&sgmii_phy2>;
-	phy-connection-type = "sgmii";
-	status = "okay";
-};
-
-&enet1 {
-	tbi-handle = <&tbi1>;
-	phy-handle = <&sgmii_phy0>;
-	phy-connection-type = "sgmii";
-	status = "okay";
-};
-
-&enet2 {
-	phy-handle = <&rgmii_phy1>;
-	phy-connection-type = "rgmii-id";
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-
-	ina220@40 {
-		compatible = "ti,ina220";
-		reg = <0x40>;
-		shunt-resistor = <1000>;
-	};
-
-	ina220@41 {
-		compatible = "ti,ina220";
-		reg = <0x41>;
-		shunt-resistor = <1000>;
-	};
-
-};
-
-&i2c1 {
-	status = "okay";
-	codec: sgtl5000@a {
-		#sound-dai-cells = <0>;
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		VDDA-supply = <&reg_3p3v>;
-		VDDIO-supply = <&reg_3p3v>;
-		clocks = <&sys_mclk>;
-	};
-};
-
-&ifc {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	/* NOR Flash on board */
-	ranges = <0x0 0x0 0x0 0x60000000 0x08000000>;
-	status = "okay";
-
-	nor@0,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "cfi-flash";
-		reg = <0x0 0x0 0x8000000>;
-		big-endian;
-		bank-width = <2>;
-		device-width = <1>;
-	};
-};
-
-&lpuart0 {
-	status = "okay";
-};
-
-&mdio0 {
-	sgmii_phy0: ethernet-phy@0 {
-		reg = <0x0>;
-	};
-	rgmii_phy1: ethernet-phy@1 {
-		reg = <0x1>;
-	};
-	sgmii_phy2: ethernet-phy@2 {
-		reg = <0x2>;
-	};
-	tbi0: tbi-phy@1f {
-		reg = <0x1f>;
-		device_type = "tbi-phy";
-	};
-};
-
-&mdio1 {
-	tbi1: tbi-phy@1f {
-		reg = <0x1f>;
-		device_type = "tbi-phy";
-	};
-};
-
-&esdhc {
-        status = "okay";
-};
-
-&qspi {
-	status = "okay";
-
-	n25q128a130: flash@0 {
-		compatible = "jedec,spi-nor";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <50000000>;
-		reg = <0>;
-		spi-rx-bus-width = <4>;
-		spi-tx-bus-width = <4>;
-	};
-};
-
-&sai1 {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&can0 {
-	status = "okay";
-};
-
-&can1 {
-	status = "okay";
-};
-
-&can2 {
-	status = "disabled";
-};
-
-&can3 {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/marvell/Makefile b/arch/arm/boot/dts/marvell/Makefile
new file mode 100644
index 000000000000..1e0f5ff492f7
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/Makefile
@@ -0,0 +1,165 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_MMP) += \
+	pxa168-aspenite.dtb \
+	pxa910-dkb.dtb \
+	mmp2-brownstone.dtb \
+	mmp2-olpc-xo-1-75.dtb \
+	mmp3-dell-ariel.dtb
+dtb-$(CONFIG_ARCH_ORION5X) += \
+	orion5x-kuroboxpro.dtb \
+	orion5x-lacie-d2-network.dtb \
+	orion5x-lacie-ethernet-disk-mini-v2.dtb \
+	orion5x-linkstation-lsgl.dtb \
+	orion5x-linkstation-lswtgl.dtb \
+	orion5x-linkstation-lschl.dtb \
+	orion5x-lswsgl.dtb \
+	orion5x-maxtor-shared-storage-2.dtb \
+	orion5x-netgear-wnr854t.dtb \
+	orion5x-rd88f5182-nas.dtb
+dtb-$(CONFIG_MACH_ARMADA_370) += \
+	armada-370-c200-v2.dtb \
+	armada-370-db.dtb \
+	armada-370-dlink-dns327l.dtb \
+	armada-370-mirabox.dtb \
+	armada-370-netgear-rn102.dtb \
+	armada-370-netgear-rn104.dtb \
+	armada-370-rd.dtb \
+	armada-370-seagate-nas-2bay.dtb \
+	armada-370-seagate-nas-4bay.dtb \
+	armada-370-seagate-personal-cloud.dtb \
+	armada-370-seagate-personal-cloud-2bay.dtb \
+	armada-370-synology-ds213j.dtb
+dtb-$(CONFIG_MACH_ARMADA_375) += \
+	armada-375-db.dtb
+dtb-$(CONFIG_MACH_ARMADA_38X) += \
+	armada-381-netgear-gs110emx.dtb \
+	armada-382-rd-ac3x-48g4x2xl.dtb \
+	armada-385-atl-x530.dtb \
+	armada-385-clearfog-gtr-s4.dtb \
+	armada-385-clearfog-gtr-l8.dtb \
+	armada-385-db-88f6820-amc.dtb \
+	armada-385-db-ap.dtb \
+	armada-385-linksys-caiman.dtb \
+	armada-385-linksys-cobra.dtb \
+	armada-385-linksys-rango.dtb \
+	armada-385-linksys-shelby.dtb \
+	armada-385-synology-ds116.dtb \
+	armada-385-turris-omnia.dtb \
+	armada-388-clearfog.dtb \
+	armada-388-clearfog-base.dtb \
+	armada-388-clearfog-pro.dtb \
+	armada-388-db.dtb \
+	armada-388-gp.dtb \
+	armada-388-helios4.dtb \
+	armada-388-rd.dtb
+dtb-$(CONFIG_MACH_ARMADA_39X) += \
+	armada-390-db.dtb \
+	armada-395-gp.dtb \
+	armada-398-db.dtb
+dtb-$(CONFIG_MACH_ARMADA_XP) += \
+	armada-xp-axpwifiap.dtb \
+	armada-xp-crs305-1g-4s.dtb \
+	armada-xp-crs305-1g-4s-bit.dtb \
+	armada-xp-crs326-24g-2s.dtb \
+	armada-xp-crs326-24g-2s-bit.dtb \
+	armada-xp-crs328-4c-20s-4s.dtb \
+	armada-xp-crs328-4c-20s-4s-bit.dtb \
+	armada-xp-db.dtb \
+	armada-xp-db-dxbc2.dtb \
+	armada-xp-db-xc3-24g4xg.dtb \
+	armada-xp-gp.dtb \
+	armada-xp-lenovo-ix4-300d.dtb \
+	armada-xp-linksys-mamba.dtb \
+	armada-xp-matrix.dtb \
+	armada-xp-netgear-rn2120.dtb \
+	armada-xp-openblocks-ax3-4.dtb \
+	armada-xp-synology-ds414.dtb
+dtb-$(CONFIG_MACH_DOVE) += \
+	dove-cubox.dtb \
+	dove-cubox-es.dtb \
+	dove-d2plug.dtb \
+	dove-d3plug.dtb \
+	dove-dove-db.dtb \
+	dove-sbc-a510.dtb
+dtb-$(CONFIG_MACH_KIRKWOOD) += \
+	kirkwood-4i-edge-200.dtb \
+	kirkwood-b3.dtb \
+	kirkwood-blackarmor-nas220.dtb \
+	kirkwood-c200-v1.dtb \
+	kirkwood-cloudbox.dtb \
+	kirkwood-d2net.dtb \
+	kirkwood-db-88f6281.dtb \
+	kirkwood-db-88f6282.dtb \
+	kirkwood-dir665.dtb \
+	kirkwood-dns320.dtb \
+	kirkwood-dns325.dtb \
+	kirkwood-dockstar.dtb \
+	kirkwood-dreamplug.dtb \
+	kirkwood-ds109.dtb \
+	kirkwood-ds110jv10.dtb \
+	kirkwood-ds111.dtb \
+	kirkwood-ds112.dtb \
+	kirkwood-ds209.dtb \
+	kirkwood-ds210.dtb \
+	kirkwood-ds212.dtb \
+	kirkwood-ds212j.dtb \
+	kirkwood-ds409.dtb \
+	kirkwood-ds409slim.dtb \
+	kirkwood-ds411.dtb \
+	kirkwood-ds411j.dtb \
+	kirkwood-ds411slim.dtb \
+	kirkwood-goflexnet.dtb \
+	kirkwood-guruplug-server-plus.dtb \
+	kirkwood-ib62x0.dtb \
+	kirkwood-iconnect.dtb \
+	kirkwood-iomega_ix2_200.dtb \
+	kirkwood-is2.dtb \
+	kirkwood-km_fixedeth.dtb \
+	kirkwood-km_kirkwood.dtb \
+	kirkwood-l-50.dtb \
+	kirkwood-laplug.dtb \
+	kirkwood-linkstation-lsqvl.dtb \
+	kirkwood-linkstation-lsvl.dtb \
+	kirkwood-linkstation-lswsxl.dtb \
+	kirkwood-linkstation-lswvl.dtb \
+	kirkwood-linkstation-lswxl.dtb \
+	kirkwood-linksys-viper.dtb \
+	kirkwood-lschlv2.dtb \
+	kirkwood-lsxhl.dtb \
+	kirkwood-mplcec4.dtb \
+	kirkwood-mv88f6281gtw-ge.dtb \
+	kirkwood-nas2big.dtb \
+	kirkwood-net2big.dtb \
+	kirkwood-net5big.dtb \
+	kirkwood-netgear_readynas_duo_v2.dtb \
+	kirkwood-netgear_readynas_nv+_v2.dtb \
+	kirkwood-ns2.dtb \
+	kirkwood-ns2lite.dtb \
+	kirkwood-ns2max.dtb \
+	kirkwood-ns2mini.dtb \
+	kirkwood-nsa310.dtb \
+	kirkwood-nsa310a.dtb \
+	kirkwood-nsa310s.dtb \
+	kirkwood-nsa320.dtb \
+	kirkwood-nsa325.dtb \
+	kirkwood-openblocks_a6.dtb \
+	kirkwood-openblocks_a7.dtb \
+	kirkwood-openrd-base.dtb \
+	kirkwood-openrd-client.dtb \
+	kirkwood-openrd-ultimate.dtb \
+	kirkwood-pogo_e02.dtb \
+	kirkwood-pogoplug-series-4.dtb \
+	kirkwood-rd88f6192.dtb \
+	kirkwood-rd88f6281-z0.dtb \
+	kirkwood-rd88f6281-a.dtb \
+	kirkwood-rs212.dtb \
+	kirkwood-rs409.dtb \
+	kirkwood-rs411.dtb \
+	kirkwood-sheevaplug.dtb \
+	kirkwood-sheevaplug-esata.dtb \
+	kirkwood-t5325.dtb \
+	kirkwood-topkick.dtb \
+	kirkwood-ts219-6281.dtb \
+	kirkwood-ts219-6282.dtb \
+	kirkwood-ts419-6281.dtb \
+	kirkwood-ts419-6282.dtb
diff --git a/arch/arm/boot/dts/marvell/armada-370-c200-v2.dts b/arch/arm/boot/dts/marvell/armada-370-c200-v2.dts
new file mode 100644
index 000000000000..84d40e1d70ef
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-370-c200-v2.dts
@@ -0,0 +1,388 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Device Tree file for Ctera C200-V2
+ *
+ * Copyright (C) 2022 Pawel Dembicki <paweldembicki@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "armada-370.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Ctera C200 V2";
+	compatible = "ctera,c200-v2", "marvell,armada370", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1024 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
+	};
+
+	thermal-zones {
+		ethphy-thermal {
+			polling-delay = <20000>;
+			polling-delay-passive = <2000>;
+
+			thermal-sensors = <&ethphy0>;
+
+			trips {
+				ethphy_alert1: trip1 {
+					temperature = <65000>;
+					hysteresis = <4000>;
+					type = "passive";
+				};
+
+				ethphy_crit: trip2 {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	beeper {
+		compatible = "pwm-beeper";
+		pinctrl-0 = <&pmx_beeper>;
+		pinctrl-names = "default";
+		pwms = <&gpio1 31 4000>;
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_poweroff>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_buttons>;
+		pinctrl-names = "default";
+
+		button-power {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		button-reset {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+		};
+
+		button-usb1 {
+			label = "USB1 Button";
+			linux,code = <BTN_0>;
+			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+		};
+
+		button-usb2 {
+			label = "USB2 Button";
+			linux,code = <BTN_1>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_leds1 &pmx_leds2>;
+		pinctrl-names = "default";
+
+		led-0 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-2 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+		};
+
+		led-3 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+		};
+
+		led-4 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
+		};
+
+		led-6 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+		};
+
+		led-7 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-8 {
+			function = LED_FUNCTION_DISK_ERR;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+		};
+
+		led-9 {
+			function = LED_FUNCTION_DISK_ERR;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+		};
+
+		led-10 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
+		};
+
+		led-11 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+		};
+
+		led-12 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&coherencyfab {
+	broken-idle;
+};
+
+&eth1 {
+	pinctrl-0 = <&ge1_rgmii_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	phy-handle = <&ethphy0>;
+	phy-connection-type = "rgmii-id";
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+	clock-frequency = <100000>;
+	status = "okay";
+
+	hwmon@2a {
+		compatible = "nuvoton,nct7802";
+		reg = <0x2a>;
+	};
+
+	rtc@30 {
+		compatible = "sii,s35390a";
+		reg = <0x30>;
+	};
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+
+	ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */
+		reg = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "uboot";
+				reg = <0x0000000 0x200000>;
+				read-only;
+			};
+
+			partition@200000 {
+				label = "certificate";
+				reg = <0x0200000 0x100000>;
+				read-only;
+			};
+
+			partition@300000 {
+				label = "preset_cfg";
+				reg = <0x0300000 0x100000>;
+				read-only;
+			};
+
+			partition@400000 {
+				label = "dev_params";
+				reg = <0x0400000 0x100000>;
+				read-only;
+			};
+			partition@500000 {
+				label = "active_bank";
+				reg = <0x0500000 0x0100000>;
+			};
+
+			partition@600000 {
+				label = "magic";
+				reg = <0x0600000 0x0100000>;
+				read-only;
+			};
+
+			partition@700000 {
+				label = "bank1";
+				reg = <0x0700000 0x2800000>;
+			};
+
+			partition@2f00000 {
+				label = "bank2";
+				reg = <0x2f00000 0x2800000>;
+			};
+
+			/* 0x5700000-0x5a00000 undefined in vendor firmware */
+
+			partition@5a00000 {
+				label = "reserved";
+				reg = <0x5a00000 0x2000000>;
+			};
+
+			partition@7a00000 {
+				label = "rootfs";
+				reg = <0x7a00000 0x8600000>;
+			};
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	pcie@1,0 { /* Renesas uPD720202 USB 3.0 controller */
+		pinctrl-0 = <&pmx_pcie>;
+		pinctrl-names = "default";
+		status = "okay";
+		reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	pmx_poweroff: pmx-poweroff {
+		marvell,pins = "mpp7";
+		marvell,function = "gpo";
+	};
+
+	pmx_power_cpu: pmx-power-cpu {
+		marvell,pins = "mpp4";
+		marvell,function = "vdd";
+	};
+
+	pmx_buttons: pmx-buttons {
+		marvell,pins = "mpp6", "mpp10", "mpp14", "mpp32";
+		marvell,function = "gpio";
+	};
+
+	pmx_leds1: pmx-leds1 {
+		marvell,pins = "mpp47";
+		marvell,function = "gpo";
+	};
+
+	pmx_leds2: pmx-leds2 {
+		marvell,pins = "mpp12", "mpp13", "mpp15", "mpp16", "mpp50", "mpp51",
+			       "mpp52", "mpp53", "mpp55", "mpp56", "mpp57", "mpp58";
+		marvell,function = "gpio";
+	};
+
+	pmx_pcie: pmx-pcie {
+		marvell,pins = "mpp59";
+		marvell,function = "gpio";
+	};
+
+	pmx_beeper: pmx-beeper {
+		marvell,pins = "mpp63";
+		marvell,function = "gpio";
+	};
+};
+
+&pmsu {
+	pinctrl-0 = <&pmx_power_cpu>;
+	pinctrl-names = "default";
+};
+
+&rtc {
+	status = "disabled";
+};
+
+&sata {
+	nr-ports = <2>;
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hdd0_temp: sata-port@0 {
+		reg = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	hdd1_temp: sata-port@1 {
+		reg = <1>;
+		#thermal-sensor-cells = <0>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/marvell/armada-370-db.dts
index 77261a2fb949..a9a05d826f22 100644
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ b/arch/arm/boot/dts/marvell/armada-370-db.dts
@@ -119,7 +119,7 @@
 			"Out Jack", "HPL",
 			"Out Jack", "HPR",
 			"AIN1L", "In Jack",
-			"AIN1L", "In Jack";
+			"AIN1R", "In Jack";
 		status = "okay";
 
 		simple-audio-card,dai-link@0 {
@@ -203,7 +203,7 @@
 	pinctrl-names = "default";
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "mx25l25635e", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts b/arch/arm/boot/dts/marvell/armada-370-dlink-dns327l.dts
index 2008c6eaaa52..d4c4efabd254 100644
--- a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
+++ b/arch/arm/boot/dts/marvell/armada-370-dlink-dns327l.dts
@@ -86,73 +86,64 @@
 
 		pinctrl-names = "default";
 
-		sata-r-amber-pin {
+		led-sata-r-amber {
 			label = "dns327l:amber:sata-r";
 			gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
 		};
 
-		sata-l-amber-pin {
+		led-sata-l-amber {
 			label = "dns327l:amber:sata-l";
 			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
 		};
 
-		backup-led-pin {
+		led-backup {
 			label = "dns327l:white:usb";
 			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usb_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			pinctrl-0 = <&xhci_pwr_pin>;
-			pinctrl-names = "default";
-			regulator-name = "USB3.0 Port Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-boot-on;
-			regulator-always-on;
-			gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>;
-		};
+	usb_power: regulator-1 {
+		compatible = "regulator-fixed";
+		pinctrl-0 = <&xhci_pwr_pin>;
+		pinctrl-names = "default";
+		regulator-name = "USB3.0 Port Power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-boot-on;
+		regulator-always-on;
+		gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+	};
 
-		sata_r_power: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			pinctrl-0 = <&sata_r_pwr_pin>;
-			pinctrl-names = "default";
-			regulator-name = "SATA-R Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			startup-delay-us = <2000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
-		};
+	sata_r_power: regulator-2 {
+		compatible = "regulator-fixed";
+		pinctrl-0 = <&sata_r_pwr_pin>;
+		pinctrl-names = "default";
+		regulator-name = "SATA-R Power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		startup-delay-us = <2000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+	};
 
-		sata_l_power: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			pinctrl-0 = <&sata_l_pwr_pin>;
-			pinctrl-names = "default";
-			regulator-name = "SATA-L Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			startup-delay-us = <4000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>;
-		};
+	sata_l_power: regulator-3 {
+		compatible = "regulator-fixed";
+		pinctrl-0 = <&sata_l_pwr_pin>;
+		pinctrl-names = "default";
+		regulator-name = "SATA-L Power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		startup-delay-us = <4000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/marvell/armada-370-mirabox.dts
index 7c2f5a79b50d..7c2f5a79b50d 100644
--- a/arch/arm/boot/dts/armada-370-mirabox.dts
+++ b/arch/arm/boot/dts/marvell/armada-370-mirabox.dts
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/marvell/armada-370-netgear-rn102.dts
index b0b640b7de40..079b37cf148a 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts
+++ b/arch/arm/boot/dts/marvell/armada-370-netgear-rn102.dts
@@ -85,11 +85,11 @@
 	};
 
 	clocks {
-	       g762_clk: g762-oscillator {
-			 compatible = "fixed-clock";
-			 #clock-cells = <0>;
-			 clock-frequency = <8192>;
-	       };
+		g762_clk: g762-oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <8192>;
+		};
 	};
 
 	gpio-leds {
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/marvell/armada-370-netgear-rn104.dts
index 85e2e9e27a9f..d752ac1d7b58 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts
+++ b/arch/arm/boot/dts/marvell/armada-370-netgear-rn104.dts
@@ -94,11 +94,11 @@
 	};
 
 	clocks {
-	       g762_clk: g762-oscillator {
-			 compatible = "fixed-clock";
-			 #clock-cells = <0>;
-			 clock-frequency = <8192>;
-	       };
+		g762_clk: g762-oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <8192>;
+		};
 	};
 
 	gpio-leds {
diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/marvell/armada-370-rd.dts
index c910d157a686..f23f6b3fc8f3 100644
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ b/arch/arm/boot/dts/marvell/armada-370-rd.dts
@@ -20,6 +20,7 @@
 /dts-v1/;
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/gpio/gpio.h>
 #include "armada-370.dtsi"
 
@@ -61,8 +62,8 @@
 				status = "okay";
 				phy-mode = "rgmii-id";
 				fixed-link {
-					   speed = <1000>;
-					   full-duplex;
+					speed = <1000>;
+					full-duplex;
 				};
 			};
 
@@ -84,8 +85,6 @@
 
 			gpio-keys {
 				compatible = "gpio-keys";
-				#address-cells = <1>;
-				#size-cells = <0>;
 				button {
 					label = "Software Button";
 					linux,code = <KEY_POWER>;
@@ -96,7 +95,7 @@
 			gpio-fan {
 				compatible = "gpio-fan";
 				gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
-				gpio-fan,speed-map = <0 0 3000 1>;
+				gpio-fan,speed-map = <0 0>, <3000 1>;
 				pinctrl-0 = <&fan_pins>;
 				pinctrl-names = "default";
 			};
@@ -137,44 +136,53 @@
 	pinctrl-names = "default";
 	phy0: ethernet-phy@0 {
 		reg = <0>;
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_WHITE>;
+				function = LED_FUNCTION_WAN;
+				default-state = "keep";
+			};
+		};
 	};
 
-	switch: switch@10 {
+	switch: ethernet-switch@10 {
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <0x10>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@0 {
+			ethernet-port@0 {
 				reg = <0>;
 				label = "lan0";
 			};
 
-			port@1 {
-			       reg = <1>;
-			       label = "lan1";
+			ethernet-port@1 {
+				reg = <1>;
+				label = "lan1";
 			};
 
-			port@2 {
-			       reg = <2>;
-			       label = "lan2";
+			ethernet-port@2 {
+				reg = <2>;
+				label = "lan2";
 			};
 
-			port@3 {
-			       reg = <3>;
-			       label = "lan3";
+			ethernet-port@3 {
+				reg = <3>;
+				label = "lan3";
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
-				label = "cpu";
 				ethernet = <&eth1>;
+				phy-mode = "rgmii-id";
 				fixed-link {
 					speed = <1000>;
 					full-duplex;
@@ -186,25 +194,25 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switchphy0: switchphy@0 {
+			switchphy0: ethernet-phy@0 {
 				reg = <0>;
 				interrupt-parent = <&switch>;
 				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			switchphy1: switchphy@1 {
+			switchphy1: ethernet-phy@1 {
 				reg = <1>;
 				interrupt-parent = <&switch>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			switchphy2: switchphy@2 {
+			switchphy2: ethernet-phy@2 {
 				reg = <2>;
 				interrupt-parent = <&switch>;
 				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			switchphy3: switchphy@3 {
+			switchphy3: ethernet-phy@3 {
 				reg = <3>;
 				interrupt-parent = <&switch>;
 				interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-2bay.dts b/arch/arm/boot/dts/marvell/armada-370-seagate-nas-2bay.dts
index 8dd242e668e6..6ec3dd3337f4 100644
--- a/arch/arm/boot/dts/armada-370-seagate-nas-2bay.dts
+++ b/arch/arm/boot/dts/marvell/armada-370-seagate-nas-2bay.dts
@@ -25,9 +25,9 @@
 
 	gpio-fan {
 		gpio-fan,speed-map =
-			<   0 3
-			  950 2
-			 1400 1
-			 1800 0>;
+			<   0 3>,
+			< 950 2>,
+			<1400 1>,
+			<1800 0>;
 	};
 };
diff --git a/arch/arm/boot/dts/marvell/armada-370-seagate-nas-4bay.dts b/arch/arm/boot/dts/marvell/armada-370-seagate-nas-4bay.dts
new file mode 100644
index 000000000000..3011578a3124
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-370-seagate-nas-4bay.dts
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Seagate NAS 4-Bay (Armada 370 SoC).
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Vincent Donnefort <vdonnefort@gmail.com>
+ */
+
+/*
+ * Here are some information allowing to identify the device:
+ *
+ * Product name                 : Seagate NAS 4-Bay
+ * Code name (board/PCB)        : Dart 4-Bay
+ * Model name (case sticker)    : SRPD40
+ * Material desc (product spec) : STCUxxxxxxx
+ */
+
+/dts-v1/;
+#include "armada-370-seagate-nas-xbay.dtsi"
+#include <dt-bindings/leds/leds-ns2.h>
+
+/ {
+	model = "Seagate NAS 4-Bay (Dart, SRPD40)";
+	compatible = "seagate,dart-4", "marvell,armada370", "marvell,armada-370-xp";
+
+	soc {
+		internal-regs {
+			ethernet@74000 {
+				status = "okay";
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			i2c@11000 {
+				/* I2C GPIO expander (PCA9554A) */
+				pca9554: pca9554@21 {
+					compatible = "nxp,pca9554";
+					reg = <0x21>;
+					#gpio-cells = <2>;
+					gpio-controller;
+				};
+			};
+		};
+	};
+
+	regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "SATA2 power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pca9554 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "SATA3 power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pca9554 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-leds {
+		led-red-sata2 {
+			label = "dart:red:sata2";
+			gpios = <&pca9554 0 GPIO_ACTIVE_LOW>;
+		};
+		led-red-sata3 {
+			label = "dart:red:sata3";
+			gpios = <&pca9554 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds-ns2 {
+		compatible = "lacie,ns2-leds";
+
+		white-sata2 {
+			label = "dart:white:sata2";
+			cmd-gpio = <&pca9554 1 GPIO_ACTIVE_HIGH>;
+			slow-gpio = <&pca9554 2 GPIO_ACTIVE_HIGH>;
+			num-modes = <4>;
+			modes-map = <NS_V2_LED_SATA 0 0
+				     NS_V2_LED_OFF  0 1
+				     NS_V2_LED_ON   1 0
+				     NS_V2_LED_ON   1 1>;
+		};
+		white-sata3 {
+			label = "dart:white:sata3";
+			cmd-gpio = <&pca9554 4 GPIO_ACTIVE_HIGH>;
+			slow-gpio = <&pca9554 5 GPIO_ACTIVE_HIGH>;
+			num-modes = <4>;
+			modes-map = <NS_V2_LED_SATA 0 0
+				     NS_V2_LED_OFF  0 1
+				     NS_V2_LED_ON   1 0
+				     NS_V2_LED_ON   1 1>;
+		};
+	};
+
+	gpio-fan {
+		gpio-fan,speed-map =
+			<   0 3>,
+			< 800 2>,
+			<1050 1>,
+			<1300 0>;
+	};
+};
+
+&pciec {
+	/* SATA AHCI controller 88SE9170 */
+	pcie@1,0 {
+		status = "okay";
+	};
+};
+
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi b/arch/arm/boot/dts/marvell/armada-370-seagate-nas-xbay.dtsi
index b52634ecf1d9..ffb3179033e7 100644
--- a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-370-seagate-nas-xbay.dtsi
@@ -70,34 +70,26 @@
 
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-
-		regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "SATA0 power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
-		};
-		regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "SATA1 power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
-		};
+	regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "SATA0 power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+	};
+
+	regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "SATA1 power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
 	};
 
 	gpio-fan {
@@ -108,22 +100,20 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		power {
+		button-power {
 			label = "Power button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
 			debounce-interval = <100>;
 		};
-		backup {
+		button-backup {
 			label = "Backup button";
 			linux,code = <KEY_OPTION>;
 			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
 			debounce-interval = <100>;
 		};
-		reset {
+		button-reset {
 			label = "Reset Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
@@ -134,21 +124,21 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		white-power {
+		led-white-power {
 			label = "dart:white:power";
 			gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "timer";
 
 		};
-		red-power {
+		led-red-power {
 			label = "dart:red:power";
 			gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
 		};
-		red-sata0 {
+		led-red-sata0 {
 			label = "dart:red:sata0";
 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 		};
-		red-sata1 {
+		led-red-sata1 {
 			label = "dart:red:sata1";
 			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/marvell/armada-370-seagate-personal-cloud-2bay.dts b/arch/arm/boot/dts/marvell/armada-370-seagate-personal-cloud-2bay.dts
new file mode 100644
index 000000000000..45d8ec5dfeb7
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-370-seagate-personal-cloud-2bay.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Seagate Personal Cloud NAS 2-Bay (Armada 370 SoC).
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Simon Guinot <simon.guinot@sequanux.org>
+ */
+
+/*
+ * Here are some information allowing to identify the device:
+ *
+ * Product name                 : Seagate Personal Cloud 2-Bay
+ * Code name (board/PCB)        : Cumulus Max
+ * Model name (case sticker)    : SRN22C
+ * Material desc (product spec) : STCSxxxxxxx
+ */
+
+/dts-v1/;
+#include "armada-370-seagate-personal-cloud.dtsi"
+
+/ {
+	model = "Seagate Personal Cloud 2-Bay (Cumulus, SRN22C)";
+	compatible = "seagate,cumulus-max", "marvell,armada370", "marvell,armada-370-xp";
+
+	soc {
+		internal-regs {
+			sata@a0000 {
+				status = "okay";
+				nr-ports = <2>;
+			};
+		};
+	};
+
+	regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "SATA1 power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dts b/arch/arm/boot/dts/marvell/armada-370-seagate-personal-cloud.dts
index 578b54b39c8f..578b54b39c8f 100644
--- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dts
+++ b/arch/arm/boot/dts/marvell/armada-370-seagate-personal-cloud.dts
diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi b/arch/arm/boot/dts/marvell/armada-370-seagate-personal-cloud.dtsi
index a624b2371fb6..054124857235 100644
--- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-370-seagate-personal-cloud.dtsi
@@ -53,52 +53,43 @@
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 27 GPIO_ACTIVE_LOW>;
-		};
-		regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "SATA0 power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
-		};
+	regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "USB Power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	};
+
+	regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "SATA0 power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
 	};
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		power {
+		button-power {
 			label = "Power button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
 			debounce-interval = <100>;
 		};
-		reset {
+		button-reset {
 			label = "Reset Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
 			debounce-interval = <100>;
 		};
-		button {
+		button-usb {
 			label = "USB VBUS error";
 			linux,code = <KEY_UNKNOWN>;
 			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
@@ -109,7 +100,7 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		red-sata0 {
+		led-red-sata0 {
 			label = "cumulus:red:sata0";
 			gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
@@ -159,7 +150,7 @@
 	pinctrl-0 = <&spi0_pins2>;
 	pinctrl-names = "default";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		/* MX25L8006E */
diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/marvell/armada-370-synology-ds213j.dts
index 64f2ce254fb6..02599a3e9816 100644
--- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts
+++ b/arch/arm/boot/dts/marvell/armada-370-synology-ds213j.dts
@@ -91,9 +91,9 @@
 			};
 
 			ethernet@70000 {
-			       status = "okay";
-			       phy = <&phy1>;
-			       phy-mode = "sgmii";
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "sgmii";
 			};
 
 			sata@a0000 {
@@ -113,14 +113,14 @@
 			 &gpio2  0 GPIO_ACTIVE_HIGH
 			 &gpio2  1 GPIO_ACTIVE_HIGH>;
 		alarm-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       1000 1
-				       1150 2
-				       1350 4
-				       1500 3
-				       1650 5
-				       1750 6
-				       1900 7 >;
+		gpio-fan,speed-map = <   0 0>,
+				     <1000 1>,
+				     <1150 2>,
+				     <1350 4>,
+				     <1500 3>,
+				     <1650 5>,
+				     <1750 6>,
+				     <1900 7>;
 	};
 
 	gpio-leds {
@@ -142,38 +142,32 @@
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&sata1_pwr_pin &sata2_pwr_pin>;
+	sata1_regulator: sata1-regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "SATA1 Power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		startup-delay-us = <2000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&sata1_pwr_pin>;
 		pinctrl-names = "default";
+	};
 
-		sata1_regulator: sata1-regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "SATA1 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			startup-delay-us = <2000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-		};
-
-		sata2_regulator: sata2-regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "SATA2 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			startup-delay-us = <4000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 30 GPIO_ACTIVE_HIGH>;
-		};
+	sata2_regulator: sata2-regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "SATA2 Power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		startup-delay-us = <4000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&sata2_pwr_pin>;
+		pinctrl-names = "default";
 	};
 };
 
@@ -258,7 +252,7 @@
 &spi0 {
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "micron,n25q064", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/marvell/armada-370-xp.dtsi
index 0b8c2a64b36f..954c891e5aee 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-370-xp.dtsi
@@ -168,7 +168,6 @@
 			mpic: interrupt-controller@20a00 {
 				compatible = "marvell,mpic";
 				#interrupt-cells = <1>;
-				#size-cells = <1>;
 				interrupt-controller;
 				msi-controller;
 			};
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/marvell/armada-370.dtsi
index 46e6d3ed8f35..2013a5ccecd3 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-370.dtsi
@@ -60,34 +60,54 @@
 				reg = <0x0800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 58>;
 				#interrupt-cells = <1>;
                                 ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
                                           0x81000000 0 0 0x81000000 0x1 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 58>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie0_intc 0>,
+						<0 0 0 2 &pcie0_intc 1>,
+						<0 0 0 3 &pcie0_intc 2>,
+						<0 0 0 4 &pcie0_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 5>;
 				status = "disabled";
+
+				pcie0_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie2: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x80000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 62>;
 				#interrupt-cells = <1>;
                                 ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
                                           0x81000000 0 0 0x81000000 0x2 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 62>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+						<0 0 0 2 &pcie2_intc 1>,
+						<0 0 0 3 &pcie2_intc 2>,
+						<0 0 0 4 &pcie2_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 9>;
 				status = "disabled";
+
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 
diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/marvell/armada-375-db.dts
index 0e679465cbb5..4c4092790a20 100644
--- a/arch/arm/boot/dts/armada-375-db.dts
+++ b/arch/arm/boot/dts/marvell/armada-375-db.dts
@@ -64,7 +64,7 @@
 
 	status = "disabled";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "n25q128a13", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/marvell/armada-375.dtsi
index 7f2f24a29e6c..99778b4b7e7b 100644
--- a/arch/arm/boot/dts/armada-375.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-375.dtsi
@@ -178,6 +178,8 @@
 
 			/* Network controller */
 			ethernet: ethernet@f0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
 				compatible = "marvell,armada-375-pp2";
 				reg = <0xf0000 0xa000>, /* Packet Processor regs */
 				      <0xc0000 0x3060>, /* LMS regs */
@@ -187,15 +189,17 @@
 				clock-names = "pp_clk", "gop_clk";
 				status = "disabled";
 
-				eth0: eth0 {
+				eth0: ethernet-port@0 {
 					interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-					port-id = <0>;
+					reg = <0>;
+					port-id = <0>; /* For backward compatibility. */
 					status = "disabled";
 				};
 
-				eth1: eth1 {
+				eth1: ethernet-port@1 {
 					interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-					port-id = <1>;
+					reg = <1>;
+					port-id = <1>; /* For backward compatibility. */
 					status = "disabled";
 				};
 			};
@@ -372,7 +376,6 @@
 				compatible = "marvell,mpic";
 				reg = <0x20a00 0x2d0>, <0x21070 0x58>;
 				#interrupt-cells = <1>;
-				#size-cells = <1>;
 				interrupt-controller;
 				msi-controller;
 				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
@@ -568,34 +571,54 @@
 				reg = <0x0800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie0_intc 0>,
+						<0 0 0 2 &pcie0_intc 1>,
+						<0 0 0 3 &pcie0_intc 2>,
+						<0 0 0 4 &pcie0_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 5>;
 				status = "disabled";
+
+				pcie0_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie1: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <1>;
 				clocks = <&gateclk 6>;
 				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 		};
diff --git a/arch/arm/boot/dts/marvell/armada-380.dtsi b/arch/arm/boot/dts/marvell/armada-380.dtsi
new file mode 100644
index 000000000000..e94f22b0e9b5
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-380.dtsi
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 380 SoC.
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+#include "armada-38x.dtsi"
+
+/ {
+	model = "Marvell Armada 380 family SoC";
+	compatible = "marvell,armada380";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-380-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+	};
+
+	soc {
+		internal-regs {
+			pinctrl@18000 {
+				compatible = "marvell,mv88f6810-pinctrl";
+			};
+		};
+
+		pcie {
+			compatible = "marvell,armada-370-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
+				0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO  */
+				0x82000000 0x3 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
+				0x81000000 0x3 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO  */>;
+
+			/* x1 port */
+			pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			/* x1 port */
+			pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+						<0 0 0 2 &pcie2_intc 1>,
+						<0 0 0 3 &pcie2_intc 2>,
+						<0 0 0 4 &pcie2_intc 3>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			/* x1 port */
+			pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
+						<0 0 0 2 &pcie3_intc 1>,
+						<0 0 0 3 &pcie3_intc 2>,
+						<0 0 0 4 &pcie3_intc 3>;
+				marvell,pcie-port = <2>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+
+				pcie3_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts b/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts
new file mode 100644
index 000000000000..5baf83e5253d
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts
@@ -0,0 +1,293 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2021, Marcel Ziswiler <marcel@ziswiler.com> */
+
+/dts-v1/;
+#include "armada-385.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Netgear GS110EMX";
+	compatible = "netgear,gs110emx", "marvell,armada380";
+
+	aliases {
+		/* So that mvebu u-boot can update the MAC addresses */
+		ethernet1 = &eth0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&front_button_pins>;
+		pinctrl-names = "default";
+
+		key-factory-default {
+			label = "Factory Default";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>; /* 128 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+		internal-regs {
+			rtc@a3800 {
+				/*
+				 * If the rtc doesn't work, run "date reset"
+				 * twice in u-boot.
+				 */
+				status = "okay";
+			};
+		};
+	};
+};
+
+&eth0 {
+	/* ethernet@70000 */
+	bm,pool-long = <0>;
+	bm,pool-short = <1>;
+	buffer-manager = <&bm>;
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&ge0_rgmii_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	fixed-link {
+		full-duplex;
+		pause;
+		speed = <1000>;
+	};
+};
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+	status = "okay";
+
+	ethernet-switch@0 {
+		compatible = "marvell,mv88e6190";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupt-parent = <&gpio1>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&switch_interrupt_pins>;
+		pinctrl-names = "default";
+		reg = <0>;
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy1: ethernet-phy@1 {
+				reg = <0x1>;
+			};
+
+			switch0phy2: ethernet-phy@2 {
+				reg = <0x2>;
+			};
+
+			switch0phy3: ethernet-phy@3 {
+				reg = <0x3>;
+			};
+
+			switch0phy4: ethernet-phy@4 {
+				reg = <0x4>;
+			};
+
+			switch0phy5: ethernet-phy@5 {
+				reg = <0x5>;
+			};
+
+			switch0phy6: ethernet-phy@6 {
+				reg = <0x6>;
+			};
+
+			switch0phy7: ethernet-phy@7 {
+				reg = <0x7>;
+			};
+
+			switch0phy8: ethernet-phy@8 {
+				reg = <0x8>;
+			};
+		};
+
+		mdio-external {
+			compatible = "marvell,mv88e6xxx-mdio-external";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy1: ethernet-phy@b {
+				reg = <0xb>;
+				compatible = "ethernet-phy-ieee802.3-c45";
+			};
+
+			phy2: ethernet-phy@c {
+				reg = <0xc>;
+				compatible = "ethernet-phy-ieee802.3-c45";
+			};
+		};
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ethernet-port@0 {
+				ethernet = <&eth0>;
+				phy-mode = "rgmii";
+				reg = <0>;
+
+				fixed-link {
+					full-duplex;
+					pause;
+					speed = <1000>;
+				};
+			};
+
+			ethernet-port@1 {
+				label = "lan1";
+				phy-handle = <&switch0phy1>;
+				reg = <1>;
+			};
+
+			ethernet-port@2 {
+				label = "lan2";
+				phy-handle = <&switch0phy2>;
+				reg = <2>;
+			};
+
+			ethernet-port@3 {
+				label = "lan3";
+				phy-handle = <&switch0phy3>;
+				reg = <3>;
+			};
+
+			ethernet-port@4 {
+				label = "lan4";
+				phy-handle = <&switch0phy4>;
+				reg = <4>;
+			};
+
+			ethernet-port@5 {
+				label = "lan5";
+				phy-handle = <&switch0phy5>;
+				reg = <5>;
+			};
+
+			ethernet-port@6 {
+				label = "lan6";
+				phy-handle = <&switch0phy6>;
+				reg = <6>;
+			};
+
+			ethernet-port@7 {
+				label = "lan7";
+				phy-handle = <&switch0phy7>;
+				reg = <7>;
+			};
+
+			ethernet-port@8 {
+				label = "lan8";
+				phy-handle = <&switch0phy8>;
+				reg = <8>;
+			};
+
+			ethernet-port@9 {
+				/* 88X3310P external phy */
+				label = "lan9";
+				phy-handle = <&phy1>;
+				phy-mode = "xaui";
+				reg = <9>;
+			};
+
+			ethernet-port@a {
+				/* 88X3310P external phy */
+				label = "lan10";
+				phy-handle = <&phy2>;
+				phy-mode = "xaui";
+				reg = <0xa>;
+			};
+		};
+	};
+};
+
+&pinctrl {
+	front_button_pins: front-button-pins {
+		marvell,pins = "mpp38";
+		marvell,function = "gpio";
+	};
+
+	switch_interrupt_pins: switch-interrupt-pins {
+		marvell,pins = "mpp39";
+		marvell,function = "gpio";
+	};
+};
+
+&spi0 {
+	pinctrl-0 = <&spi0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <3000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "boot";
+				read-only;
+				reg = <0x00000000 0x00100000>;
+			};
+
+			partition@100000 {
+				label = "env";
+				reg = <0x00100000 0x00010000>;
+			};
+
+			partition@200000 {
+				label = "rsv";
+				reg = <0x00110000 0x00010000>;
+			};
+
+			partition@300000 {
+				label = "image0";
+				reg = <0x00120000 0x00900000>;
+			};
+
+			partition@400000 {
+				label = "config";
+				reg = <0x00a20000 0x00300000>;
+			};
+
+			partition@480000 {
+				label = "debug";
+				reg = <0x00d20000 0x002e0000>;
+			};
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/armada-382-rd-ac3x-48g4x2xl.dts b/arch/arm/boot/dts/marvell/armada-382-rd-ac3x-48g4x2xl.dts
index 584f0d0398a5..6ab65d21861a 100644
--- a/arch/arm/boot/dts/armada-382-rd-ac3x-48g4x2xl.dts
+++ b/arch/arm/boot/dts/marvell/armada-382-rd-ac3x-48g4x2xl.dts
@@ -40,7 +40,7 @@
 	pinctrl-0 = <&i2c0_pins>;
 	status = "okay";
 
-	eeprom@53{
+	eeprom@53 {
 		compatible = "atmel,24c64";
 		reg = <0x53>;
 	};
@@ -95,11 +95,11 @@
 				reg = <0x00000000 0x00500000>;
 				label = "u-boot";
 			};
-			partition@500000{
+			partition@500000 {
 				reg = <0x00500000 0x00400000>;
 				label = "u-boot env";
 			};
-			partition@900000{
+			partition@900000 {
 				reg = <0x00900000 0x3F700000>;
 				label = "user";
 			};
diff --git a/arch/arm/boot/dts/armada-385-atl-x530.dts b/arch/arm/boot/dts/marvell/armada-385-atl-x530.dts
index ed3f41c7df71..2fb7304039be 100644
--- a/arch/arm/boot/dts/armada-385-atl-x530.dts
+++ b/arch/arm/boot/dts/marvell/armada-385-atl-x530.dts
@@ -43,6 +43,17 @@
 			};
 		};
 	};
+
+	led-7seg {
+		compatible = "gpio-7-segment";
+		segment-gpios = <&led_7seg_gpio 0 GPIO_ACTIVE_LOW>,
+				<&led_7seg_gpio 1 GPIO_ACTIVE_LOW>,
+				<&led_7seg_gpio 2 GPIO_ACTIVE_LOW>,
+				<&led_7seg_gpio 3 GPIO_ACTIVE_LOW>,
+				<&led_7seg_gpio 4 GPIO_ACTIVE_LOW>,
+				<&led_7seg_gpio 5 GPIO_ACTIVE_LOW>,
+				<&led_7seg_gpio 6 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &pciec {
@@ -149,7 +160,7 @@
 			#size-cells = <0>;
 			reg = <3>;
 
-			gpio@20 {
+			led_7seg_gpio: gpio@20 {
 				compatible = "nxp,pca9554";
 				gpio-controller;
 				#gpio-cells = <2>;
@@ -168,7 +179,7 @@
 	pinctrl-0 = <&spi1_pins>;
 	status = "okay";
 
-	spi-flash@1 {
+	flash@1 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
@@ -179,19 +190,19 @@
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			partition@u-boot {
+			partition@0 {
 				reg = <0x00000000 0x00100000>;
 				label = "u-boot";
 			};
-			partition@u-boot-env {
+			partition@100000 {
 				reg = <0x00100000 0x00040000>;
 				label = "u-boot-env";
 			};
-			partition@unused {
+			partition@140000 {
 				reg = <0x00140000 0x00e80000>;
 				label = "unused";
 			};
-			partition@idprom {
+			partition@fc0000 {
 				reg = <0x00fc0000 0x00040000>;
 				label = "idprom";
 			};
@@ -216,16 +227,16 @@
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			partition@user {
+			partition@0 {
 				reg = <0x00000000 0x0f000000>;
 				label = "user";
 			};
-			partition@errlog {
+			partition@f000000 {
 				/* Maximum mtdoops size is 8MB, so set to that. */
 				reg = <0x0f000000 0x00800000>;
 				label = "errlog";
 			};
-			partition@nand-bbt {
+			partition@f800000 {
 				reg = <0x0f800000 0x00800000>;
 				label = "nand-bbt";
 			};
diff --git a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts
new file mode 100644
index 000000000000..cb85f8e31dfc
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+#include "armada-385-clearfog-gtr.dtsi"
+
+/ {
+	model = "SolidRun Clearfog GTR L8";
+	compatible = "solidrun,clearfog-gtr-l8", "marvell,armada385",
+		     "marvell,armada380";
+
+	/* CON25 */
+	sfp1: sfp-1 {
+		compatible = "sff,sfp";
+		pinctrl-0 = <&cf_gtr_sfp1_pins>;
+		pinctrl-names = "default";
+		i2c-bus = <&i2c0>;
+		mod-def0-gpio = <&gpio0 24 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&mdio {
+	switch0: ethernet-switch@4 {
+		compatible = "marvell,mv88e6190";
+		reg = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cf_gtr_switch_reset_pins>;
+		reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ethernet-port@1 {
+				reg = <1>;
+				label = "lan1";
+				phy-handle = <&switch0phy0>;
+			};
+
+			ethernet-port@2 {
+				reg = <2>;
+				label = "lan2";
+				phy-handle = <&switch0phy1>;
+			};
+
+			ethernet-port@3 {
+				reg = <3>;
+				label = "lan3";
+				phy-handle = <&switch0phy2>;
+			};
+
+			ethernet-port@4 {
+				reg = <4>;
+				label = "lan4";
+				phy-handle = <&switch0phy3>;
+			};
+
+			ethernet-port@5 {
+				reg = <5>;
+				label = "lan5";
+				phy-handle = <&switch0phy4>;
+			};
+
+			ethernet-port@6 {
+				reg = <6>;
+				label = "lan6";
+				phy-handle = <&switch0phy5>;
+			};
+
+			ethernet-port@7 {
+				reg = <7>;
+				label = "lan7";
+				phy-handle = <&switch0phy6>;
+			};
+
+			ethernet-port@8 {
+				reg = <8>;
+				label = "lan8";
+				phy-handle = <&switch0phy7>;
+			};
+
+			ethernet-port@9 {
+				reg = <9>;
+				label = "lan-sfp";
+				phy-mode = "sgmii";
+				sfp = <&sfp1>;
+				managed = "in-band-status";
+			};
+
+			ethernet-port@10 {
+				reg = <10>;
+				phy-mode = "2500base-x";
+				ethernet = <&eth1>;
+
+				fixed-link {
+					speed = <2500>;
+					full-duplex;
+				};
+			};
+
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy0: ethernet-phy@1 {
+				reg = <0x1>;
+			};
+
+			switch0phy1: ethernet-phy@2 {
+				reg = <0x2>;
+			};
+
+			switch0phy2: ethernet-phy@3 {
+				reg = <0x3>;
+			};
+
+			switch0phy3: ethernet-phy@4 {
+				reg = <0x4>;
+			};
+
+			switch0phy4: ethernet-phy@5 {
+				reg = <0x5>;
+			};
+
+			switch0phy5: ethernet-phy@6 {
+				reg = <0x6>;
+			};
+
+			switch0phy6: ethernet-phy@7 {
+				reg = <0x7>;
+			};
+
+			switch0phy7: ethernet-phy@8 {
+				reg = <0x8>;
+			};
+		};
+
+	};
+};
diff --git a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts
new file mode 100644
index 000000000000..5f83d981449a
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+#include "armada-385-clearfog-gtr.dtsi"
+
+/ {
+	model = "SolidRun Clearfog GTR S4";
+	compatible = "solidrun,clearfog-gtr-s4", "marvell,armada385",
+		     "marvell,armada380";
+};
+
+&sfp0 {
+	tx-fault-gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+};
+
+&mdio {
+	switch0: ethernet-switch@4 {
+		compatible = "marvell,mv88e6085";
+		reg = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cf_gtr_switch_reset_pins>;
+		reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ethernet-port@1 {
+				reg = <1>;
+				label = "lan2";
+				phy-handle = <&switch0phy0>;
+			};
+
+			ethernet-port@2 {
+				reg = <2>;
+				label = "lan1";
+				phy-handle = <&switch0phy1>;
+			};
+
+			ethernet-port@3 {
+				reg = <3>;
+				label = "lan4";
+				phy-handle = <&switch0phy2>;
+			};
+
+			ethernet-port@4 {
+				reg = <4>;
+				label = "lan3";
+				phy-handle = <&switch0phy3>;
+			};
+
+			ethernet-port@5 {
+				reg = <5>;
+				phy-mode = "2500base-x";
+				ethernet = <&eth1>;
+
+				fixed-link {
+					speed = <2500>;
+					full-duplex;
+				};
+			};
+
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy0: ethernet-phy@11 {
+				reg = <0x11>;
+			};
+
+			switch0phy1: ethernet-phy@12 {
+				reg = <0x12>;
+			};
+
+			switch0phy2: ethernet-phy@13 {
+				reg = <0x13>;
+			};
+
+			switch0phy3: ethernet-phy@14 {
+				reg = <0x14>;
+			};
+		};
+
+	};
+};
diff --git a/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi
index 624bbcae68c0..7aa71a9aa1bb 100644
--- a/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi
@@ -141,18 +141,13 @@
 			};
 
 			pinctrl@18000 {
-				cf_gtr_switch_reset_pins: cf-gtr-switch-reset-pins {
-					marvell,pins = "mpp18";
-					marvell,function = "gpio";
-				};
-
-				cf_gtr_usb3_con_vbus: cf-gtr-usb3-con-vbus {
-					marvell,pins = "mpp22";
+				cf_gtr_fan_pwm: cf-gtr-fan-pwm {
+					marvell,pins = "mpp23";
 					marvell,function = "gpio";
 				};
 
-				cf_gtr_fan_pwm: cf-gtr-fan-pwm {
-					marvell,pins = "mpp23";
+				cf_gtr_front_button_pins: cf-gtr-front-button-pins {
+					marvell,pins = "mpp53";
 					marvell,function = "gpio";
 				};
 
@@ -162,6 +157,37 @@
 					marvell,function = "i2c1";
 				};
 
+				cf_gtr_isolation_pins: cf-gtr-isolation-pins {
+					marvell,pins = "mpp47";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_led_pins: led-pins {
+					marvell,pins = "mpp42", "mpp52";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_lte_disable_pins: lte-disable-pins {
+					marvell,pins = "mpp34";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_pci_pins: pci-pins {
+					// pci reset
+					marvell,pins = "mpp33", "mpp35", "mpp44";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_poe_reset_pins: cf-gtr-poe-reset-pins {
+					marvell,pins = "mpp48";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_rear_button_pins: cf-gtr-rear-button-pins {
+					marvell,pins = "mpp36";
+					marvell,function = "gpio";
+				};
+
 				cf_gtr_sdhci_pins: cf-gtr-sdhci-pins {
 					marvell,pins = "mpp21", "mpp28",
 						       "mpp37", "mpp38",
@@ -169,13 +195,15 @@
 					marvell,function = "sd0";
 				};
 
-				cf_gtr_isolation_pins: cf-gtr-isolation-pins {
-					marvell,pins = "mpp47";
+				cf_gtr_sfp0_pins: sfp0-pins {
+					/* sfp modabs, txdisable */
+					marvell,pins = "mpp25", "mpp46";
 					marvell,function = "gpio";
 				};
 
-				cf_gtr_poe_reset_pins: cf-gtr-poe-reset-pins {
-					marvell,pins = "mpp48";
+				cf_gtr_sfp1_pins: sfp1-pins {
+					/* sfp modabs, txdisable */
+					marvell,pins = "mpp24", "mpp54";
 					marvell,function = "gpio";
 				};
 
@@ -184,13 +212,18 @@
 					marvell,function = "spi1";
 				};
 
-				cf_gtr_front_button_pins: cf-gtr-front-button-pins {
-					marvell,pins = "mpp53";
+				cf_gtr_switch_reset_pins: cf-gtr-switch-reset-pins {
+					marvell,pins = "mpp18";
 					marvell,function = "gpio";
 				};
 
-				cf_gtr_rear_button_pins: cf-gtr-rear-button-pins {
-					marvell,pins = "mpp36";
+				cf_gtr_usb3_con_vbus: cf-gtr-usb3-con-vbus {
+					marvell,pins = "mpp22";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_wifi_disable_pins: wifi-disable-pins {
+					marvell,pins = "mpp30", "mpp31";
 					marvell,function = "gpio";
 				};
 			};
@@ -221,21 +254,26 @@
 		};
 
 		pcie {
+			pinctrl-0 = <&cf_gtr_pci_pins>;
+			pinctrl-names = "default";
 			status = "okay";
 			/*
 			 * The PCIe units are accessible through
 			 * the mini-PCIe connectors on the board.
 			 */
+			/* CON3 - serdes 0 */
 			pcie@1,0 {
 				reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
 				status = "okay";
 			};
 
+			/* CON4 - serdes 2 */
 			pcie@2,0 {
 				reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
 				status = "okay";
 			};
 
+			/* CON2 - serdes 4 */
 			pcie@3,0 {
 				reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
 				status = "okay";
@@ -243,10 +281,12 @@
 		};
 	};
 
-	sfp0: sfp {
+	/* CON5 */
+	sfp0: sfp-0 {
 		compatible = "sff,sfp";
+		pinctrl-0 = <&cf_gtr_sfp0_pins>;
+		pinctrl-names = "default";
 		i2c-bus = <&i2c1>;
-		los-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
 		mod-def0-gpio = <&gpio0 25 GPIO_ACTIVE_LOW>;
 		tx-disable-gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
 	};
@@ -256,14 +296,14 @@
 		pinctrl-0 = <&cf_gtr_rear_button_pins &cf_gtr_front_button_pins>;
 		pinctrl-names = "default";
 
-		button_0 {
+		button-0 {
 			label = "Rear Button";
 			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 			linux,can-disable;
 			linux,code = <BTN_0>;
 		};
 
-		button_1 {
+		button-1 {
 			label = "Front Button";
 			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
 			linux,can-disable;
@@ -273,6 +313,8 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+		pinctrl-0 = <&cf_gtr_led_pins>;
+		pinctrl-names = "default";
 
 		led1 {
 			function = LED_FUNCTION_CPU;
@@ -365,7 +407,7 @@
 	pinctrl-names = "default";
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "w25q32", "jedec,spi-nor";
@@ -381,14 +423,14 @@
 	status = "okay";
 
 	/* U26 temperature sensor placed near SoC */
-	temp1: nct75@4c {
-		compatible = "lm75";
+	temp1: temperature-sensor@4c {
+		compatible = "ti,tmp75c";
 		reg = <0x4c>;
 	};
 
 	/* U27 temperature sensor placed near RTC battery */
-	temp2: nct75@4d {
-		compatible = "lm75";
+	temp2: temperature-sensor@4d {
+		compatible = "ti,tmp75c";
 		reg = <0x4d>;
 	};
 
@@ -408,10 +450,10 @@
 };
 
 &gpio0 {
-	pinctrl-0 = <&cf_gtr_fan_pwm>;
+	pinctrl-0 = <&cf_gtr_fan_pwm &cf_gtr_wifi_disable_pins>;
 	pinctrl-names = "default";
 
-	wifi-disable {
+	wifi-disable-hog {
 		gpio-hog;
 		gpios = <30 GPIO_ACTIVE_LOW>, <31 GPIO_ACTIVE_LOW>;
 		output-low;
@@ -420,10 +462,10 @@
 };
 
 &gpio1 {
-	pinctrl-0 = <&cf_gtr_isolation_pins &cf_gtr_poe_reset_pins>;
+	pinctrl-0 = <&cf_gtr_isolation_pins &cf_gtr_poe_reset_pins &cf_gtr_lte_disable_pins>;
 	pinctrl-names = "default";
 
-	lte-disable {
+	lte-disable-hog {
 		gpio-hog;
 		gpios = <2 GPIO_ACTIVE_LOW>;
 		output-low;
@@ -434,14 +476,14 @@
 	 * This signal, when asserted, isolates Armada 38x sample at reset pins
 	 * from control of external devices. Should be de-asserted after reset.
 	 */
-	sar-isolation {
+	sar-isolation-hog {
 		gpio-hog;
 		gpios = <15 GPIO_ACTIVE_LOW>;
 		output-low;
 		line-name = "sar-isolation";
 	};
 
-	poe-reset {
+	poe-reset-hog {
 		gpio-hog;
 		gpios = <16 GPIO_ACTIVE_LOW>;
 		output-low;
diff --git a/arch/arm/boot/dts/armada-385-db-88f6820-amc.dts b/arch/arm/boot/dts/marvell/armada-385-db-88f6820-amc.dts
index 7881df3b28a0..389d9c75d546 100644
--- a/arch/arm/boot/dts/armada-385-db-88f6820-amc.dts
+++ b/arch/arm/boot/dts/marvell/armada-385-db-88f6820-amc.dts
@@ -126,7 +126,7 @@
 	pinctrl-0 = <&spi1_pins>;
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/marvell/armada-385-db-ap.dts
index 0e4613bb56ee..332f8fce77dc 100644
--- a/arch/arm/boot/dts/armada-385-db-ap.dts
+++ b/arch/arm/boot/dts/marvell/armada-385-db-ap.dts
@@ -192,7 +192,7 @@
 	pinctrl-0 = <&spi1_pins>;
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "st,m25p128", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-385-linksys-caiman.dts b/arch/arm/boot/dts/marvell/armada-385-linksys-caiman.dts
index a03050c97084..88b2921fed55 100644
--- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts
+++ b/arch/arm/boot/dts/marvell/armada-385-linksys-caiman.dts
@@ -62,11 +62,11 @@
 };
 
 &gpio_leds {
-	power {
+	led-power {
 		label = "caiman:white:power";
 	};
 
-	sata {
+	led-sata {
 		label = "caiman:white:sata";
 	};
 };
diff --git a/arch/arm/boot/dts/armada-385-linksys-cobra.dts b/arch/arm/boot/dts/marvell/armada-385-linksys-cobra.dts
index e3e4877a6f49..88200f930d0d 100644
--- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts
+++ b/arch/arm/boot/dts/marvell/armada-385-linksys-cobra.dts
@@ -62,11 +62,11 @@
 };
 
 &gpio_leds {
-	power {
+	led-power {
 		label = "cobra:white:power";
 	};
 
-	sata {
+	led-sata {
 		label = "cobra:white:sata";
 	};
 };
diff --git a/arch/arm/boot/dts/armada-385-linksys-rango.dts b/arch/arm/boot/dts/marvell/armada-385-linksys-rango.dts
index 3c4af57ec2b9..4ab45f294de2 100644
--- a/arch/arm/boot/dts/armada-385-linksys-rango.dts
+++ b/arch/arm/boot/dts/marvell/armada-385-linksys-rango.dts
@@ -54,22 +54,22 @@
 };
 
 &gpio_leds {
-	power {
+	led-power {
 		gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
 		label = "rango:white:power";
 	};
 
-	sata {
+	led-sata {
 		gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
 		label = "rango:white:sata";
 	};
 
-	wlan_2g {
+	led-wlan_2g {
 		gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
 		label = "rango:white:wlan_2g";
 	};
 
-	wlan_5g {
+	led-wlan_5g {
 		gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 		label = "rango:white:wlan_5g";
 	};
diff --git a/arch/arm/boot/dts/armada-385-linksys-shelby.dts b/arch/arm/boot/dts/marvell/armada-385-linksys-shelby.dts
index 3451cd3e5dff..f1b1f22413f1 100644
--- a/arch/arm/boot/dts/armada-385-linksys-shelby.dts
+++ b/arch/arm/boot/dts/marvell/armada-385-linksys-shelby.dts
@@ -62,11 +62,11 @@
 };
 
 &gpio_leds {
-	power {
+	led-power {
 		label = "shelby:white:power";
 	};
 
-	sata {
+	led-sata {
 		label = "shelby:white:sata";
 	};
 };
diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi
index fb9c8a0b241c..4116ed60f709 100644
--- a/arch/arm/boot/dts/armada-385-linksys.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi
@@ -53,13 +53,13 @@
 		pinctrl-0 = <&gpio_keys_pins>;
 		pinctrl-names = "default";
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
 		};
 
-		reset {
+		button-reset {
 			label = "Factory Reset Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
@@ -71,12 +71,12 @@
 		pinctrl-0 = <&gpio_leds_pins>;
 		pinctrl-names = "default";
 
-		power {
+		led-power {
 			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 
-		sata {
+		led-sata {
 			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 			linux,default-trigger = "disk-activity";
@@ -158,44 +158,42 @@
 &mdio {
 	status = "okay";
 
-	switch@0 {
+	ethernet-switch@0 {
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <0>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@0 {
+			ethernet-port@0 {
 				reg = <0>;
 				label = "lan4";
 			};
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan3";
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan2";
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan1";
 			};
 
-			port@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "wan";
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
-				label = "cpu";
+				phy-mode = "sgmii";
 				ethernet = <&eth2>;
 
 				fixed-link {
diff --git a/arch/arm/boot/dts/armada-385-synology-ds116.dts b/arch/arm/boot/dts/marvell/armada-385-synology-ds116.dts
index d8769956cbfc..6caa5c50175a 100644
--- a/arch/arm/boot/dts/armada-385-synology-ds116.dts
+++ b/arch/arm/boot/dts/marvell/armada-385-synology-ds116.dts
@@ -131,14 +131,14 @@
 			gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>,
 				<&gpio1 17 GPIO_ACTIVE_HIGH>,
 				<&gpio1 16 GPIO_ACTIVE_HIGH>;
-			gpio-fan,speed-map = <   0 0
-					      1500 1
-					      2500 2
-					      3000 3
-					      3400 4
-					      3700 5
-					      3900 6
-					      4000 7>;
+			gpio-fan,speed-map = <   0 0>,
+					     <1500 1>,
+					     <2500 2>,
+					     <3000 3>,
+					     <3400 4>,
+					     <3700 5>,
+					     <3900 6>,
+					     <4000 7>;
 			#cooling-cells = <2>;
 		};
 
@@ -149,7 +149,7 @@
 			 * sata0, and accesses to SATA disk 0 make it blink so it
 			 * doesn't need to be declared here.
 			 */
-			orange {
+			led-orange {
 				gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
 				label = "ds116:orange:disk";
 				default-state = "off";
@@ -223,7 +223,7 @@
 	pinctrl-0 = <&spi0_pins>;
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "macronix,mx25l6405d", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts
index 5bd6a66d2c2b..83fe00abd652 100644
--- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
+++ b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts
@@ -23,6 +23,12 @@
 		stdout-path = &uart0;
 	};
 
+	aliases {
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+		ethernet2 = &eth2;
+	};
+
 	memory {
 		device_type = "memory";
 		reg = <0x00000000 0x40000000>; /* 1024 MB */
@@ -71,16 +77,19 @@
 			pcie@1,0 {
 				/* Port 0, Lane 0 */
 				status = "okay";
+				slot-power-limit-milliwatt = <10000>;
 			};
 
 			pcie@2,0 {
 				/* Port 1, Lane 0 */
 				status = "okay";
+				slot-power-limit-milliwatt = <10000>;
 			};
 
 			pcie@3,0 {
 				/* Port 2, Lane 0 */
 				status = "okay";
+				slot-power-limit-milliwatt = <10000>;
 			};
 		};
 	};
@@ -102,6 +111,46 @@
 		 */
 		status = "disabled";
 	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		front-button {
+			label = "Front Button";
+			linux,code = <KEY_VENDOR>;
+			linux,can-disable;
+			gpios = <&mcu 0 12 GPIO_ACTIVE_HIGH>;
+			/* debouncing is done by the microcontroller */
+			debounce-interval = <0>;
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SPDIF";
+		simple-audio-card,format = "i2s";
+
+		simple-audio-card,cpu {
+			sound-dai = <&audio_controller 1>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+};
+
+&audio_controller {
+	/* Pin header U16, GPIO51 in SPDIFO mode */
+	pinctrl-0 = <&spdif_pins>;
+	pinctrl-names = "default";
+	spdif-mode;
+	status = "okay";
 };
 
 &bm {
@@ -163,6 +212,7 @@
 	buffer-manager = <&bm>;
 	bm,pool-long = <2>;
 	bm,pool-short = <3>;
+	label = "wan";
 };
 
 &i2c0 {
@@ -181,22 +231,36 @@
 			#size-cells = <0>;
 			reg = <0>;
 
-			/* STM32F0 command interface at address 0x2a */
+			mcu: system-controller@2a {
+				compatible = "cznic,turris-omnia-mcu";
+				reg = <0x2a>;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&mcu_pins>;
+
+				interrupt-parent = <&gpio1>;
+				interrupts = <11 IRQ_TYPE_NONE>;
+
+				gpio-controller;
+				#gpio-cells = <3>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
 
 			led-controller@2b {
 				compatible = "cznic,turris-omnia-leds";
 				reg = <0x2b>;
+				interrupts-extended = <&mcu 11 IRQ_TYPE_NONE>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				status = "okay";
 
 				/*
 				 * LEDs are controlled by MCU (STM32F0) at
 				 * address 0x2b.
 				 *
-				 * The driver does not support HW control mode
-				 * for the LEDs yet. Disable the LEDs for now.
-				 *
-				 * Also LED functions are not stable yet:
+				 * LED functions are not stable yet:
 				 * - there are 3 LEDs connected via MCU to PCIe
 				 *   ports. One of these ports supports mSATA.
 				 *   There is no mSATA nor PCIe function.
@@ -207,7 +271,6 @@
 				 *   B. Again there is no such function defined.
 				 *   For now we use LED_FUNCTION_INDICATOR
 				 */
-				status = "disabled";
 
 				multi-led@0 {
 					reg = <0x0>;
@@ -345,7 +408,11 @@
 			#size-cells = <0>;
 			reg = <5>;
 
-			/* ATSHA204A at address 0x64 */
+			/* ATSHA204A-MAHDA-T crypto module */
+			crypto@64 {
+				compatible = "atmel,atsha204a";
+				reg = <0x64>;
+			};
 		};
 
 		i2c@6 {
@@ -390,18 +457,17 @@
 	phy1: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
-		marvell,reg-init = <3 18 0 0x4985>;
+		marvell,reg-init = <3 18 0 0x4985>,
+				   <3 16 0xfff0 0x0001>;
 
 		/* irq is connected to &pcawan pin 7 */
 	};
 
 	/* Switch MV88E6176 at address 0x10 */
-	switch@10 {
+	ethernet-switch@10 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&swint_pins>;
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		dsa,member = <0 0>;
 		reg = <0x10>;
@@ -409,38 +475,37 @@
 		interrupt-parent = <&gpio1>;
 		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			ports@0 {
+			ethernet-port@0 {
 				reg = <0>;
 				label = "lan0";
 			};
 
-			ports@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan1";
 			};
 
-			ports@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan2";
 			};
 
-			ports@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan3";
 			};
 
-			ports@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "lan4";
 			};
 
-			ports@5 {
+			ethernet-port@5 {
 				reg = <5>;
-				label = "cpu";
 				ethernet = <&eth1>;
 				phy-mode = "rgmii-id";
 
@@ -450,12 +515,26 @@
 				};
 			};
 
-			/* port 6 is connected to eth0 */
+			ethernet-port@6 {
+				reg = <6>;
+				ethernet = <&eth0>;
+				phy-mode = "rgmii-id";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
 		};
 	};
 };
 
 &pinctrl {
+	mcu_pins: mcu-pins {
+		marvell,pins = "mpp43";
+		marvell,function = "gpio";
+	};
+
 	pcawan_pins: pcawan-pins {
 		marvell,pins = "mpp46";
 		marvell,function = "gpio";
@@ -471,7 +550,7 @@
 		marvell,function = "spi0";
 	};
 
-	spi0cs1_pins: spi0cs1-pins {
+	spi0cs2_pins: spi0cs2-pins {
 		marvell,pins = "mpp26";
 		marvell,function = "spi0";
 	};
@@ -482,7 +561,7 @@
 	pinctrl-0 = <&spi0_pins &spi0cs0_pins>;
 	status = "okay";
 
-	spi-nor@0 {
+	flash@0 {
 		compatible = "spansion,s25fl164k", "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -506,7 +585,7 @@
 		};
 	};
 
-	/* MISO, MOSI, SCLK and CS1 are routed to pin header CN11 */
+	/* MISO, MOSI, SCLK and CS2 are routed to pin header CN11 */
 };
 
 &uart0 {
diff --git a/arch/arm/boot/dts/marvell/armada-385.dtsi b/arch/arm/boot/dts/marvell/armada-385.dtsi
new file mode 100644
index 000000000000..be8d607c59b2
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-385.dtsi
@@ -0,0 +1,185 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 385 SoC.
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+#include "armada-38x.dtsi"
+
+/ {
+	model = "Marvell Armada 385 family SoC";
+	compatible = "marvell,armada385", "marvell,armada380";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-380-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+		};
+	};
+
+	soc {
+		pciec: pcie {
+			compatible = "marvell,armada-370-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
+				0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO  */
+				0x82000000 0x3 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
+				0x81000000 0x3 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO  */
+				0x82000000 0x4 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 3 MEM */
+				0x81000000 0x4 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 3 IO  */>;
+
+			/*
+			 * This port can be either x4 or x1. When
+			 * configured in x4 by the bootloader, then
+			 * pcie@4,0 is not available.
+			 */
+			pcie1: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			/* x1 port */
+			pcie2: pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+						<0 0 0 2 &pcie2_intc 1>,
+						<0 0 0 3 &pcie2_intc 2>,
+						<0 0 0 4 &pcie2_intc 3>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			/* x1 port */
+			pcie3: pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
+						<0 0 0 2 &pcie3_intc 1>,
+						<0 0 0 3 &pcie3_intc 2>,
+						<0 0 0 4 &pcie3_intc 3>;
+				marvell,pcie-port = <2>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+				pcie3_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			/*
+			 * x1 port only available when pcie@1,0 is
+			 * configured as a x1 port
+			 */
+			pcie4: pcie@4,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002000 0 0x48000 0 0x2000>;
+				reg = <0x2000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie4_intc 0>,
+						<0 0 0 2 &pcie4_intc 1>,
+						<0 0 0 3 &pcie4_intc 2>,
+						<0 0 0 4 &pcie4_intc 3>;
+				marvell,pcie-port = <3>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 7>;
+				status = "disabled";
+				pcie4_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+		};
+	};
+};
+
+&pinctrl {
+	compatible = "marvell,mv88f6820-pinctrl";
+};
diff --git a/arch/arm/boot/dts/armada-388-clearfog-base.dts b/arch/arm/boot/dts/marvell/armada-388-clearfog-base.dts
index 53b4bd35522a..cf32ba9b4e8e 100644
--- a/arch/arm/boot/dts/armada-388-clearfog-base.dts
+++ b/arch/arm/boot/dts/marvell/armada-388-clearfog-base.dts
@@ -19,7 +19,7 @@
 		pinctrl-0 = <&rear_button_pins>;
 		pinctrl-names = "default";
 
-		button_0 {
+		button-0 {
 			/* The rear SW3 button */
 			label = "Rear Button";
 			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
@@ -34,7 +34,7 @@
 };
 
 &gpio0 {
-	phy1_reset {
+	phy1-reset-hog {
 		gpio-hog;
 		gpios = <19 GPIO_ACTIVE_LOW>;
 		output-low;
diff --git a/arch/arm/boot/dts/armada-388-clearfog-pro.dts b/arch/arm/boot/dts/marvell/armada-388-clearfog-pro.dts
index ff890c09c3ed..ff890c09c3ed 100644
--- a/arch/arm/boot/dts/armada-388-clearfog-pro.dts
+++ b/arch/arm/boot/dts/marvell/armada-388-clearfog-pro.dts
diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/marvell/armada-388-clearfog.dts
index 4140a5303b48..09bf2e6d4ed0 100644
--- a/arch/arm/boot/dts/armada-388-clearfog.dts
+++ b/arch/arm/boot/dts/marvell/armada-388-clearfog.dts
@@ -10,8 +10,9 @@
 
 / {
 	model = "SolidRun Clearfog A1";
-	compatible = "solidrun,clearfog-a1", "marvell,armada388",
-		"marvell,armada385", "marvell,armada380";
+	compatible = "solidrun,clearfog-pro-a1", "solidrun,clearfog-a1",
+		     "marvell,armada388", "marvell,armada385",
+		     "marvell,armada380";
 
 	soc {
 		internal-regs {
@@ -35,7 +36,7 @@
 		pinctrl-0 = <&rear_button_pins>;
 		pinctrl-names = "default";
 
-		button_0 {
+		button-0 {
 			/* The rear SW3 button */
 			label = "Rear Button";
 			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
@@ -47,6 +48,8 @@
 
 &eth1 {
 	/* ethernet@30000 */
+	phy-mode = "1000base-x";
+
 	fixed-link {
 		speed = <1000>;
 		full-duplex;
@@ -90,57 +93,58 @@
 &mdio {
 	status = "okay";
 
-	switch@4 {
+	ethernet-switch@4 {
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <4>;
 		pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>;
 		pinctrl-names = "default";
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@0 {
+			ethernet-port@0 {
 				reg = <0>;
 				label = "lan5";
 			};
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan4";
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan3";
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan2";
 			};
 
-			port@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "lan1";
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
-				label = "cpu";
 				ethernet = <&eth1>;
+				phy-mode = "1000base-x";
+
 				fixed-link {
 					speed = <1000>;
 					full-duplex;
 				};
 			};
 
-			port@6 {
+			ethernet-port@6 {
 				/* 88E1512 external phy */
 				reg = <6>;
 				label = "lan6";
+				phy-mode = "rgmii-id";
+
 				fixed-link {
 					speed = <1000>;
 					full-duplex;
diff --git a/arch/arm/boot/dts/armada-388-clearfog.dtsi b/arch/arm/boot/dts/marvell/armada-388-clearfog.dtsi
index f8a06ae4a3c9..f8a06ae4a3c9 100644
--- a/arch/arm/boot/dts/armada-388-clearfog.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-388-clearfog.dtsi
diff --git a/arch/arm/boot/dts/marvell/armada-388-db.dts b/arch/arm/boot/dts/marvell/armada-388-db.dts
new file mode 100644
index 000000000000..45cc784659fd
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-388-db.dts
@@ -0,0 +1,245 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell Armada 388 evaluation board
+ * (DB-88F6820)
+ *
+ *  Copyright (C) 2014 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+/dts-v1/;
+#include "armada-388.dtsi"
+
+/ {
+	model = "Marvell Armada 385 Development Board";
+	compatible = "marvell,a385-db", "marvell,armada388",
+		"marvell,armada385", "marvell,armada380";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>; /* 256 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+		internal-regs {
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <100000>;
+				audio_codec: audio-codec@4a {
+					#sound-dai-cells = <0>;
+					compatible = "cirrus,cs42l51";
+					reg = <0x4a>;
+				};
+			};
+
+			i2c@11100 {
+				status = "okay";
+				clock-frequency = <100000>;
+			};
+
+			serial@12000 {
+				status = "okay";
+			};
+
+			ethernet@30000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
+				bm,pool-short = <3>;
+			};
+
+			usb@58000 {
+				status = "okay";
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
+				bm,pool-short = <1>;
+			};
+
+			mdio@72004 {
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+
+			sata@a8000 {
+				status = "okay";
+			};
+
+			sata@e0000 {
+				status = "okay";
+			};
+
+			bm@c8000 {
+				status = "okay";
+			};
+
+			sdhci@d8000 {
+				broken-cd;
+				wp-inverted;
+				bus-width = <8>;
+				status = "okay";
+				no-1-8-v;
+			};
+
+			audio-controller@e8000 {
+				pinctrl-0 = <&i2s_pins>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			usb3@f0000 {
+				status = "okay";
+			};
+
+			usb3@f8000 {
+				status = "okay";
+			};
+		};
+
+		bm-bppi {
+			status = "okay";
+		};
+
+		pcie {
+			status = "okay";
+			/*
+			 * The two PCIe units are accessible through
+			 * standard PCIe slots on the board.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "Armada 385 DB Audio";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Headphone", "Out Jack",
+			"Line", "In Jack";
+		simple-audio-card,routing =
+			"Out Jack", "HPL",
+			"Out Jack", "HPR",
+			"AIN1L", "In Jack",
+			"AIN1R", "In Jack";
+		status = "disabled";
+
+		simple-audio-card,dai-link@0 {
+			format = "i2s";
+			cpu {
+				sound-dai = <&audio_controller 0>;
+			};
+
+			codec {
+				sound-dai = <&audio_codec>;
+			};
+		};
+
+		simple-audio-card,dai-link@1 {
+			format = "i2s";
+			cpu {
+				sound-dai = <&audio_controller 1>;
+			};
+
+			codec {
+				sound-dai = <&spdif_out>;
+			};
+		};
+
+		simple-audio-card,dai-link@2 {
+			format = "i2s";
+			cpu {
+				sound-dai = <&audio_controller 1>;
+			};
+
+			codec {
+				sound-dai = <&spdif_in>;
+			};
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+
+	spdif_in: spdif-in {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dir";
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "w25q32", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x800000>;
+			};
+			partition@800000 {
+				label = "Linux";
+				reg = <0x800000 0x800000>;
+			};
+			partition@1000000 {
+				label = "Filesystem";
+				reg = <0x1000000 0x3f000000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/marvell/armada-388-gp.dts
index 9d873257ac45..1de0a172aa5f 100644
--- a/arch/arm/boot/dts/armada-388-gp.dts
+++ b/arch/arm/boot/dts/marvell/armada-388-gp.dts
@@ -237,8 +237,8 @@
 		gpio-fan {
 			compatible = "gpio-fan";
 			gpios = <&expander1 3 GPIO_ACTIVE_HIGH>;
-			gpio-fan,speed-map = <	 0 0
-					      3000 1>;
+			gpio-fan,speed-map = <	 0 0>,
+					     <3000 1>;
 		};
 	};
 
@@ -395,7 +395,7 @@
 	pinctrl-0 = <&spi0_pins>;
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "st,m25p128", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-388-helios4.dts b/arch/arm/boot/dts/marvell/armada-388-helios4.dts
index ec134e22bae3..ec134e22bae3 100644
--- a/arch/arm/boot/dts/armada-388-helios4.dts
+++ b/arch/arm/boot/dts/marvell/armada-388-helios4.dts
diff --git a/arch/arm/boot/dts/armada-388-rd.dts b/arch/arm/boot/dts/marvell/armada-388-rd.dts
index 328a4d6afd2c..c0efafd45b33 100644
--- a/arch/arm/boot/dts/armada-388-rd.dts
+++ b/arch/arm/boot/dts/marvell/armada-388-rd.dts
@@ -97,7 +97,7 @@
 &spi0 {
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "st,m25p128", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-388.dtsi b/arch/arm/boot/dts/marvell/armada-388.dtsi
index f3a020ff577e..f3a020ff577e 100644
--- a/arch/arm/boot/dts/armada-388.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-388.dtsi
diff --git a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi b/arch/arm/boot/dts/marvell/armada-38x-solidrun-microsom.dtsi
index 363ac4238859..2c64bc6e5a17 100644
--- a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-38x-solidrun-microsom.dtsi
@@ -101,7 +101,7 @@
 	/* The microsom has an optional W25Q32 on board, connected to CS0 */
 	pinctrl-0 = <&spi1_pins>;
 
-	w25q32: spi-flash@0 {
+	w25q32: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "w25q32", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/marvell/armada-38x.dtsi
index 9b1a24cc5e91..1d616edda322 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-38x.dtsi
@@ -168,7 +168,7 @@
 			};
 
 			uart0: serial@12000 {
-				compatible = "marvell,armada-38x-uart";
+				compatible = "marvell,armada-38x-uart", "ns16550a";
 				reg = <0x12000 0x100>;
 				reg-shift = <2>;
 				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
@@ -178,7 +178,7 @@
 			};
 
 			uart1: serial@12100 {
-				compatible = "marvell,armada-38x-uart";
+				compatible = "marvell,armada-38x-uart", "ns16550a";
 				reg = <0x12100 0x100>;
 				reg-shift = <2>;
 				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
@@ -247,7 +247,7 @@
 					marvell,function = "dev";
 				};
 
-				nand_rb: nand-rb {
+				nand_rb: nand-rb-pins {
 					marvell,pins = "mpp41";
 					marvell,function = "nand";
 				};
@@ -289,6 +289,18 @@
 					marvell,pins = "mpp44";
 					marvell,function = "sata3";
 				};
+
+				i2s_pins: i2s-pins {
+					marvell,pins = "mpp48", "mpp49",
+						       "mpp50", "mpp51",
+						       "mpp52", "mpp53";
+					marvell,function = "audio";
+				};
+
+				spdif_pins: spdif-pins {
+					marvell,pins = "mpp51";
+					marvell,function = "audio";
+				};
 			};
 
 			gpio0: gpio@18100 {
@@ -298,6 +310,7 @@
 				reg-names = "gpio", "pwm";
 				ngpios = <32>;
 				gpio-controller;
+				gpio-ranges = <&pinctrl 0 0 32>;
 				#gpio-cells = <2>;
 				#pwm-cells = <2>;
 				interrupt-controller;
@@ -316,6 +329,7 @@
 				reg-names = "gpio", "pwm";
 				ngpios = <28>;
 				gpio-controller;
+				gpio-ranges = <&pinctrl 0 32 28>;
 				#gpio-cells = <2>;
 				#pwm-cells = <2>;
 				interrupt-controller;
@@ -394,7 +408,6 @@
 				compatible = "marvell,mpic";
 				reg = <0x20a00 0x2d0>, <0x21070 0x58>;
 				#interrupt-cells = <1>;
-				#size-cells = <1>;
 				interrupt-controller;
 				msi-controller;
 				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
@@ -618,6 +631,18 @@
 				status = "disabled";
 			};
 
+			audio_controller: audio-controller@e8000 {
+				#sound-dai-cells = <1>;
+				compatible = "marvell,armada-380-audio";
+				reg = <0xe8000 0x4000>, <0x18410 0xc>,
+				      <0x18204 0x4>;
+				reg-names = "i2s_regs", "pll_regs", "soc_ctrl";
+				interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 0>;
+				clock-names = "internal";
+				status = "disabled";
+			};
+
 			usb3_0: usb3@f0000 {
 				compatible = "marvell,armada-380-xhci";
 				reg = <0xf0000 0x4000>,<0xf4000 0x4000>;
diff --git a/arch/arm/boot/dts/armada-390-db.dts b/arch/arm/boot/dts/marvell/armada-390-db.dts
index 0e29474ae9a2..20f518dbac97 100644
--- a/arch/arm/boot/dts/armada-390-db.dts
+++ b/arch/arm/boot/dts/marvell/armada-390-db.dts
@@ -81,7 +81,7 @@
 	pinctrl-0 = <&spi1_pins>;
 	pinctrl-names = "default";
 
-	spi-flash@1 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "n25q128a13",
diff --git a/arch/arm/boot/dts/armada-390.dtsi b/arch/arm/boot/dts/marvell/armada-390.dtsi
index aa2057d4d6f8..aa2057d4d6f8 100644
--- a/arch/arm/boot/dts/armada-390.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-390.dtsi
diff --git a/arch/arm/boot/dts/armada-395-gp.dts b/arch/arm/boot/dts/marvell/armada-395-gp.dts
index 6dd9e9077f84..6dd9e9077f84 100644
--- a/arch/arm/boot/dts/armada-395-gp.dts
+++ b/arch/arm/boot/dts/marvell/armada-395-gp.dts
diff --git a/arch/arm/boot/dts/armada-395.dtsi b/arch/arm/boot/dts/marvell/armada-395.dtsi
index e18a7d9cd7d4..e18a7d9cd7d4 100644
--- a/arch/arm/boot/dts/armada-395.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-395.dtsi
diff --git a/arch/arm/boot/dts/armada-398-db.dts b/arch/arm/boot/dts/marvell/armada-398-db.dts
index fc28308e5bc5..ec6cdbeedde7 100644
--- a/arch/arm/boot/dts/armada-398-db.dts
+++ b/arch/arm/boot/dts/marvell/armada-398-db.dts
@@ -79,7 +79,7 @@
 	pinctrl-0 = <&spi1_pins>;
 	pinctrl-names = "default";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "n25q128a13", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-398.dtsi b/arch/arm/boot/dts/marvell/armada-398.dtsi
index c5ac89399ce1..c5ac89399ce1 100644
--- a/arch/arm/boot/dts/armada-398.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-398.dtsi
diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/marvell/armada-39x.dtsi
index e0b7c2099831..6d05835efb42 100644
--- a/arch/arm/boot/dts/armada-39x.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-39x.dtsi
@@ -268,7 +268,6 @@
 				compatible = "marvell,mpic";
 				reg = <0x20a00 0x2d0>, <0x21070 0x58>;
 				#interrupt-cells = <1>;
-				#size-cells = <1>;
 				interrupt-controller;
 				msi-controller;
 				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
@@ -438,54 +437,84 @@
 				reg = <0x0800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 8>;
 				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			/* x1 port */
 			pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+						<0 0 0 2 &pcie2_intc 1>,
+						<0 0 0 3 &pcie2_intc 2>,
+						<0 0 0 4 &pcie2_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 5>;
 				status = "disabled";
+
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			/* x1 port */
 			pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
 					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
+						<0 0 0 2 &pcie3_intc 1>,
+						<0 0 0 3 &pcie3_intc 2>,
+						<0 0 0 4 &pcie3_intc 3>;
 				marvell,pcie-port = <2>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 6>;
 				status = "disabled";
+
+				pcie3_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			/*
@@ -494,20 +523,30 @@
 			 */
 			pcie@4,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				assigned-addresses = <0x82002000 0 0x48000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
 					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie4_intc 0>,
+						<0 0 0 2 &pcie4_intc 1>,
+						<0 0 0 3 &pcie4_intc 2>,
+						<0 0 0 4 &pcie4_intc 3>;
 				marvell,pcie-port = <3>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 7>;
 				status = "disabled";
+
+				pcie4_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 
diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/marvell/armada-xp-98dx3236.dtsi
index 38a052a0312d..a9a71326aafc 100644
--- a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-xp-98dx3236.dtsi
@@ -76,16 +76,26 @@
 				reg = <0x0800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 58>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 58>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 5>;
 				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 
@@ -286,6 +296,7 @@
 	compatible = "marvell,armada-xp-wdt";
 	clocks = <&coreclk 2>, <&refclk>;
 	clock-names = "nbclk", "fixed";
+	interrupts = <93>, <38>;
 };
 
 &cpurst {
@@ -311,7 +322,7 @@
 		marvell,function = "dev";
 	};
 
-	nand_rb: nand-rb {
+	nand_rb: nand-rb-pins {
 		marvell,pins = "mpp19";
 		marvell,function = "nand";
 	};
diff --git a/arch/arm/boot/dts/armada-xp-98dx3336.dtsi b/arch/arm/boot/dts/marvell/armada-xp-98dx3336.dtsi
index 1d9d8a8ea60c..1d9d8a8ea60c 100644
--- a/arch/arm/boot/dts/armada-xp-98dx3336.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-xp-98dx3336.dtsi
diff --git a/arch/arm/boot/dts/armada-xp-98dx4251.dtsi b/arch/arm/boot/dts/marvell/armada-xp-98dx4251.dtsi
index 48ffdc72bfc7..48ffdc72bfc7 100644
--- a/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-xp-98dx4251.dtsi
diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/marvell/armada-xp-axpwifiap.dts
index 606fd3476a59..5a74197be0ad 100644
--- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts
+++ b/arch/arm/boot/dts/marvell/armada-xp-axpwifiap.dts
@@ -69,14 +69,12 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&keys_pin>;
 		pinctrl-names = "default";
 
-		reset {
+		button-reset {
 			label = "Factory Reset Button";
 			linux,code = <KEY_SETUP>;
 			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
@@ -134,7 +132,7 @@
 &spi0 {
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "n25q128a13", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-xp-crs305-1g-4s-bit.dts b/arch/arm/boot/dts/marvell/armada-xp-crs305-1g-4s-bit.dts
index a022c68dc943..c28e140b4afc 100644
--- a/arch/arm/boot/dts/armada-xp-crs305-1g-4s-bit.dts
+++ b/arch/arm/boot/dts/marvell/armada-xp-crs305-1g-4s-bit.dts
@@ -15,7 +15,7 @@
 &spi0 {
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dts b/arch/arm/boot/dts/marvell/armada-xp-crs305-1g-4s.dts
index 010b83b54212..010b83b54212 100644
--- a/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dts
+++ b/arch/arm/boot/dts/marvell/armada-xp-crs305-1g-4s.dts
diff --git a/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dtsi b/arch/arm/boot/dts/marvell/armada-xp-crs305-1g-4s.dtsi
index 32fb21b2bf6a..47b003a81bd4 100644
--- a/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-xp-crs305-1g-4s.dtsi
@@ -80,7 +80,7 @@
 &spi0 {
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-xp-crs326-24g-2s-bit.dts b/arch/arm/boot/dts/marvell/armada-xp-crs326-24g-2s-bit.dts
index 21f442afab1f..20ba5c823bb2 100644
--- a/arch/arm/boot/dts/armada-xp-crs326-24g-2s-bit.dts
+++ b/arch/arm/boot/dts/marvell/armada-xp-crs326-24g-2s-bit.dts
@@ -15,7 +15,7 @@
 &spi0 {
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dts b/arch/arm/boot/dts/marvell/armada-xp-crs326-24g-2s.dts
index 83aef43f66d5..83aef43f66d5 100644
--- a/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dts
+++ b/arch/arm/boot/dts/marvell/armada-xp-crs326-24g-2s.dts
diff --git a/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dtsi b/arch/arm/boot/dts/marvell/armada-xp-crs326-24g-2s.dtsi
index f3e1a25ca5f2..cab99d8e2911 100644
--- a/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-xp-crs326-24g-2s.dtsi
@@ -80,7 +80,7 @@
 &spi0 {
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s-bit.dts b/arch/arm/boot/dts/marvell/armada-xp-crs328-4c-20s-4s-bit.dts
index e05aee6cdc04..2caa3980fdf6 100644
--- a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s-bit.dts
+++ b/arch/arm/boot/dts/marvell/armada-xp-crs328-4c-20s-4s-bit.dts
@@ -15,7 +15,7 @@
 &spi0 {
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dts b/arch/arm/boot/dts/marvell/armada-xp-crs328-4c-20s-4s.dts
index 665757f6e18e..665757f6e18e 100644
--- a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dts
+++ b/arch/arm/boot/dts/marvell/armada-xp-crs328-4c-20s-4s.dts
diff --git a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dtsi b/arch/arm/boot/dts/marvell/armada-xp-crs328-4c-20s-4s.dtsi
index c8b1355ce15e..7028482ce4b2 100644
--- a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-xp-crs328-4c-20s-4s.dtsi
@@ -80,7 +80,7 @@
 &spi0 {
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-xp-db-dxbc2.dts b/arch/arm/boot/dts/marvell/armada-xp-db-dxbc2.dts
index 8a3aa616bbd0..02bef8dc4270 100644
--- a/arch/arm/boot/dts/armada-xp-db-dxbc2.dts
+++ b/arch/arm/boot/dts/marvell/armada-xp-db-dxbc2.dts
@@ -93,7 +93,7 @@
 &spi0 {
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p64";
diff --git a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts b/arch/arm/boot/dts/marvell/armada-xp-db-xc3-24g4xg.dts
index 4ec0ae01b61d..d1b61dad0c46 100644
--- a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts
+++ b/arch/arm/boot/dts/marvell/armada-xp-db-xc3-24g4xg.dts
@@ -89,7 +89,7 @@
 &spi0 {
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p64";
diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/marvell/armada-xp-db.dts
index 5d04dc68cf57..75318fd0fc11 100644
--- a/arch/arm/boot/dts/armada-xp-db.dts
+++ b/arch/arm/boot/dts/marvell/armada-xp-db.dts
@@ -235,7 +235,7 @@
 &spi0 {
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p64", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/marvell/armada-xp-gp.dts
index b4cca507cf13..d1d348b91c0a 100644
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/marvell/armada-xp-gp.dts
@@ -220,7 +220,7 @@
 &spi0 {
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "n25q128a13", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/marvell/armada-xp-lenovo-ix4-300d.dts
index 87dcb502f72d..21b95578fe95 100644
--- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
+++ b/arch/arm/boot/dts/marvell/armada-xp-lenovo-ix4-300d.dts
@@ -164,11 +164,11 @@
 		};
 	};
 
-	spi3 {
+	spi-3 {
 		compatible = "spi-gpio";
 		status = "okay";
-		gpio-sck = <&gpio0 25 GPIO_ACTIVE_LOW>;
-		gpio-mosi = <&gpio1 15 GPIO_ACTIVE_LOW>; /*gpio 47*/
+		sck-gpios  = <&gpio0 25 GPIO_ACTIVE_LOW>;
+		mosi-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; /*gpio 47*/
 		cs-gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
 		num-chipselects = <1>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts
index 8480a16919a0..ea859f7ea042 100644
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts
@@ -172,20 +172,18 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&keys_pin>;
 		pinctrl-names = "default";
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
 		};
 
-		reset {
+		button-reset {
 			label = "Factory Reset Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
@@ -197,7 +195,7 @@
 		pinctrl-0 = <&power_led_pin>;
 		pinctrl-names = "default";
 
-		power {
+		led-power {
 			label = "mamba:white:power";
 			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
@@ -255,7 +253,7 @@
 &spi0 {
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "everspin,mr25h256";
@@ -267,44 +265,42 @@
 &mdio {
 	status = "okay";
 
-	switch@0 {
+	ethernet-switch@0 {
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <0>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@0 {
+			ethernet-port@0 {
 				reg = <0>;
 				label = "lan4";
 			};
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan3";
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan2";
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan1";
 			};
 
-			port@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "internet";
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
-				label = "cpu";
+				phy-mode = "rgmii-id";
 				ethernet = <&eth0>;
 				fixed-link {
 					speed = <1000>;
diff --git a/arch/arm/boot/dts/armada-xp-matrix.dts b/arch/arm/boot/dts/marvell/armada-xp-matrix.dts
index 1395cea12759..1395cea12759 100644
--- a/arch/arm/boot/dts/armada-xp-matrix.dts
+++ b/arch/arm/boot/dts/marvell/armada-xp-matrix.dts
diff --git a/arch/arm/boot/dts/marvell/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/marvell/armada-xp-mv78230.dtsi
new file mode 100644
index 000000000000..5ea9d509cd30
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-mv78230.dtsi
@@ -0,0 +1,257 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * Contains definitions specific to the Armada XP MV78230 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+#include "armada-xp.dtsi"
+
+/ {
+	model = "Marvell Armada XP MV78230 SoC";
+	compatible = "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-xp-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <0>;
+			clocks = <&cpuclk 0>;
+			clock-latency = <1000000>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <1>;
+			clocks = <&cpuclk 1>;
+			clock-latency = <1000000>;
+		};
+	};
+
+	soc {
+		/*
+		 * MV78230 has 2 PCIe units Gen2.0: One unit can be
+		 * configured as x4 or quad x1 lanes. One unit is
+		 * x1 only.
+		 */
+		pciec: pcie@82000000 {
+			compatible = "marvell,armada-xp-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
+				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
+				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
+				0x82000000 0x1 0       MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0       MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
+				0x82000000 0x2 0       MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
+				0x81000000 0x2 0       MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
+				0x82000000 0x3 0       MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
+				0x81000000 0x3 0       MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
+				0x82000000 0x4 0       MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
+				0x81000000 0x4 0       MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
+				0x82000000 0x5 0       MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
+				0x81000000 0x5 0       MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */>;
+
+			pcie1: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 58>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie2: pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 59>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+						<0 0 0 2 &pcie2_intc 1>,
+						<0 0 0 3 &pcie2_intc 2>,
+						<0 0 0 4 &pcie2_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie3: pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 60>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
+						<0 0 0 2 &pcie3_intc 1>,
+						<0 0 0 3 &pcie3_intc 2>,
+						<0 0 0 4 &pcie3_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 7>;
+				status = "disabled";
+
+				pcie3_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie4: pcie@4,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
+				reg = <0x2000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 61>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie4_intc 0>,
+						<0 0 0 2 &pcie4_intc 1>,
+						<0 0 0 3 &pcie4_intc 2>,
+						<0 0 0 4 &pcie4_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+
+				pcie4_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie5: pcie@5,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				reg = <0x2800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 62>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
+					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie5_intc 0>,
+						<0 0 0 2 &pcie5_intc 1>,
+						<0 0 0 3 &pcie5_intc 2>,
+						<0 0 0 4 &pcie5_intc 3>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 9>;
+				status = "disabled";
+
+				pcie5_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+		};
+
+		internal-regs {
+			gpio0: gpio@18100 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18100 0x40>, <0x181c0 0x08>;
+				reg-names = "gpio", "pwm";
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <82>, <83>, <84>, <85>;
+				clocks = <&coreclk 0>;
+			};
+
+			gpio1: gpio@18140 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18140 0x40>, <0x181c8 0x08>;
+				reg-names = "gpio", "pwm";
+				ngpios = <17>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <87>, <88>, <89>;
+				clocks = <&coreclk 0>;
+			};
+		};
+	};
+};
+
+&pinctrl {
+	compatible = "marvell,mv78230-pinctrl";
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/marvell/armada-xp-mv78260.dtsi
new file mode 100644
index 000000000000..6c6fbb9faf5a
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-mv78260.dtsi
@@ -0,0 +1,404 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * Contains definitions specific to the Armada XP MV78260 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+#include "armada-xp.dtsi"
+
+/ {
+	model = "Marvell Armada XP MV78260 SoC";
+	compatible = "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-xp-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <0>;
+			clocks = <&cpuclk 0>;
+			clock-latency = <1000000>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <1>;
+			clocks = <&cpuclk 1>;
+			clock-latency = <1000000>;
+		};
+	};
+
+	soc {
+		/*
+		 * MV78260 has 3 PCIe units Gen2.0: Two units can be
+		 * configured as x4 or quad x1 lanes. One unit is
+		 * x4 only.
+		 */
+		pciec: pcie@82000000 {
+			compatible = "marvell,armada-xp-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
+				0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
+				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
+				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
+				0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000   /* Port 1.1 registers */
+				0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000   /* Port 1.2 registers */
+				0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000   /* Port 1.3 registers */
+				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
+				0x82000000 0x3 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
+				0x81000000 0x3 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
+				0x82000000 0x4 0     MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
+				0x81000000 0x4 0     MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
+
+				0x82000000 0x5 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
+				0x81000000 0x5 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
+				0x82000000 0x6 0     MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
+				0x81000000 0x6 0     MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO  */
+				0x82000000 0x7 0     MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
+				0x81000000 0x7 0     MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO  */
+				0x82000000 0x8 0     MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
+				0x81000000 0x8 0     MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO  */
+
+				0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
+				0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */>;
+
+			pcie1: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 58>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie2: pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 59>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+						<0 0 0 2 &pcie2_intc 1>,
+						<0 0 0 3 &pcie2_intc 2>,
+						<0 0 0 4 &pcie2_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie3: pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 60>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
+						<0 0 0 2 &pcie3_intc 1>,
+						<0 0 0 3 &pcie3_intc 2>,
+						<0 0 0 4 &pcie3_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 7>;
+				status = "disabled";
+
+				pcie3_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie4: pcie@4,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
+				reg = <0x2000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 61>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie4_intc 0>,
+						<0 0 0 2 &pcie4_intc 1>,
+						<0 0 0 3 &pcie4_intc 2>,
+						<0 0 0 4 &pcie4_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+
+				pcie4_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie5: pcie@5,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				reg = <0x2800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 62>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
+					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie5_intc 0>,
+						<0 0 0 2 &pcie5_intc 1>,
+						<0 0 0 3 &pcie5_intc 2>,
+						<0 0 0 4 &pcie5_intc 3>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 9>;
+				status = "disabled";
+
+				pcie5_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie6: pcie@6,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
+				reg = <0x3000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 63>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
+					  0x81000000 0 0 0x81000000 0x6 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie6_intc 0>,
+						<0 0 0 2 &pcie6_intc 1>,
+						<0 0 0 3 &pcie6_intc 2>,
+						<0 0 0 4 &pcie6_intc 3>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 10>;
+				status = "disabled";
+
+				pcie6_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie7: pcie@7,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
+				reg = <0x3800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 64>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
+					  0x81000000 0 0 0x81000000 0x7 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie7_intc 0>,
+						<0 0 0 2 &pcie7_intc 1>,
+						<0 0 0 3 &pcie7_intc 2>,
+						<0 0 0 4 &pcie7_intc 3>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 11>;
+				status = "disabled";
+
+				pcie7_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie8: pcie@8,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
+				reg = <0x4000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 65>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
+					  0x81000000 0 0 0x81000000 0x8 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie8_intc 0>,
+						<0 0 0 2 &pcie8_intc 1>,
+						<0 0 0 3 &pcie8_intc 2>,
+						<0 0 0 4 &pcie8_intc 3>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 12>;
+				status = "disabled";
+
+				pcie8_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie9: pcie@9,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
+				reg = <0x4800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 99>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
+					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie9_intc 0>,
+						<0 0 0 2 &pcie9_intc 1>,
+						<0 0 0 3 &pcie9_intc 2>,
+						<0 0 0 4 &pcie9_intc 3>;
+				marvell,pcie-port = <2>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 26>;
+				status = "disabled";
+
+				pcie9_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+		};
+
+		internal-regs {
+			gpio0: gpio@18100 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18100 0x40>, <0x181c0 0x08>;
+				reg-names = "gpio", "pwm";
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <82>, <83>, <84>, <85>;
+				clocks = <&coreclk 0>;
+			};
+
+			gpio1: gpio@18140 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18140 0x40>, <0x181c8 0x08>;
+				reg-names = "gpio", "pwm";
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <87>, <88>, <89>, <90>;
+				clocks = <&coreclk 0>;
+			};
+
+			gpio2: gpio@18180 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18180 0x40>;
+				ngpios = <3>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <91>;
+			};
+
+			eth3: ethernet@34000 {
+				compatible = "marvell,armada-xp-neta";
+				reg = <0x34000 0x4000>;
+				interrupts = <14>;
+				clocks = <&gateclk 1>;
+				status = "disabled";
+			};
+		};
+	};
+};
+
+&pinctrl {
+	compatible = "marvell,mv78260-pinctrl";
+};
diff --git a/arch/arm/boot/dts/marvell/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/marvell/armada-xp-mv78460.dtsi
new file mode 100644
index 000000000000..16185edf9aa5
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/armada-xp-mv78460.dtsi
@@ -0,0 +1,453 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * Contains definitions specific to the Armada XP MV78460 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+#include "armada-xp.dtsi"
+
+/ {
+	model = "Marvell Armada XP MV78460 SoC";
+	compatible = "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+	};
+
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-xp-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <0>;
+			clocks = <&cpuclk 0>;
+			clock-latency = <1000000>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <1>;
+			clocks = <&cpuclk 1>;
+			clock-latency = <1000000>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <2>;
+			clocks = <&cpuclk 2>;
+			clock-latency = <1000000>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <3>;
+			clocks = <&cpuclk 3>;
+			clock-latency = <1000000>;
+		};
+	};
+
+	soc {
+		/*
+		 * MV78460 has 4 PCIe units Gen2.0: Two units can be
+		 * configured as x4 or quad x1 lanes. Two units are
+		 * x4/x1.
+		 */
+		pciec: pcie@82000000 {
+			compatible = "marvell,armada-xp-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
+				0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
+				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
+				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
+				0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000   /* Port 3.0 registers */
+				0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000   /* Port 1.1 registers */
+				0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000   /* Port 1.2 registers */
+				0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000   /* Port 1.3 registers */
+				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
+				0x82000000 0x3 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
+				0x81000000 0x3 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
+				0x82000000 0x4 0     MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
+				0x81000000 0x4 0     MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
+
+				0x82000000 0x5 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
+				0x81000000 0x5 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
+				0x82000000 0x6 0     MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
+				0x81000000 0x6 0     MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO  */
+				0x82000000 0x7 0     MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
+				0x81000000 0x7 0     MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO  */
+				0x82000000 0x8 0     MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
+				0x81000000 0x8 0     MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO  */
+
+				0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
+				0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */
+
+				0x82000000 0xa 0     MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
+				0x81000000 0xa 0     MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO  */>;
+
+			pcie1: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 58>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie2: pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 59>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+						<0 0 0 2 &pcie2_intc 1>,
+						<0 0 0 3 &pcie2_intc 2>,
+						<0 0 0 4 &pcie2_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie3: pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 60>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
+						<0 0 0 2 &pcie3_intc 1>,
+						<0 0 0 3 &pcie3_intc 2>,
+						<0 0 0 4 &pcie3_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 7>;
+				status = "disabled";
+
+				pcie3_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie4: pcie@4,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
+				reg = <0x2000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 61>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie4_intc 0>,
+						<0 0 0 2 &pcie4_intc 1>,
+						<0 0 0 3 &pcie4_intc 2>,
+						<0 0 0 4 &pcie4_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+
+				pcie4_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie5: pcie@5,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				reg = <0x2800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 62>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
+					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie5_intc 0>,
+						<0 0 0 2 &pcie5_intc 1>,
+						<0 0 0 3 &pcie5_intc 2>,
+						<0 0 0 4 &pcie5_intc 3>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 9>;
+				status = "disabled";
+
+				pcie5_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie6: pcie@6,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
+				reg = <0x3000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 63>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
+					  0x81000000 0 0 0x81000000 0x6 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie6_intc 0>,
+						<0 0 0 2 &pcie6_intc 1>,
+						<0 0 0 3 &pcie6_intc 2>,
+						<0 0 0 4 &pcie6_intc 3>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 10>;
+				status = "disabled";
+
+				pcie6_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie7: pcie@7,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
+				reg = <0x3800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 64>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
+					  0x81000000 0 0 0x81000000 0x7 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie7_intc 0>,
+						<0 0 0 2 &pcie7_intc 1>,
+						<0 0 0 3 &pcie7_intc 2>,
+						<0 0 0 4 &pcie7_intc 3>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 11>;
+				status = "disabled";
+
+				pcie7_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie8: pcie@8,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
+				reg = <0x4000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 65>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
+					  0x81000000 0 0 0x81000000 0x8 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie8_intc 0>,
+						<0 0 0 2 &pcie8_intc 1>,
+						<0 0 0 3 &pcie8_intc 2>,
+						<0 0 0 4 &pcie8_intc 3>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 12>;
+				status = "disabled";
+
+				pcie8_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie9: pcie@9,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
+				reg = <0x4800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 99>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
+					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie9_intc 0>,
+						<0 0 0 2 &pcie9_intc 1>,
+						<0 0 0 3 &pcie9_intc 2>,
+						<0 0 0 4 &pcie9_intc 3>;
+				marvell,pcie-port = <2>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 26>;
+				status = "disabled";
+
+				pcie9_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+
+			pcie10: pcie@a,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
+				reg = <0x5000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 103>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
+					  0x81000000 0 0 0x81000000 0xa 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie10_intc 0>,
+						<0 0 0 2 &pcie10_intc 1>,
+						<0 0 0 3 &pcie10_intc 2>,
+						<0 0 0 4 &pcie10_intc 3>;
+				marvell,pcie-port = <3>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 27>;
+				status = "disabled";
+
+				pcie10_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+		};
+
+		internal-regs {
+			gpio0: gpio@18100 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18100 0x40>, <0x181c0 0x08>;
+				reg-names = "gpio", "pwm";
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <82>, <83>, <84>, <85>;
+				clocks = <&coreclk 0>;
+			};
+
+			gpio1: gpio@18140 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18140 0x40>, <0x181c8 0x08>;
+				reg-names = "gpio", "pwm";
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <87>, <88>, <89>, <90>;
+				clocks = <&coreclk 0>;
+			};
+
+			gpio2: gpio@18180 {
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18180 0x40>;
+				ngpios = <3>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <91>;
+			};
+
+			eth3: ethernet@34000 {
+				compatible = "marvell,armada-xp-neta";
+				reg = <0x34000 0x4000>;
+				interrupts = <14>;
+				clocks = <&gateclk 1>;
+				status = "disabled";
+			};
+		};
+	};
+};
+
+&pinctrl {
+	compatible = "marvell,mv78460-pinctrl";
+};
diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/marvell/armada-xp-netgear-rn2120.dts
index 8ea73587db81..31933f81144e 100644
--- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
+++ b/arch/arm/boot/dts/marvell/armada-xp-netgear-rn2120.dts
@@ -121,11 +121,11 @@
 	};
 
 	clocks {
-	       g762_clk: g762-oscillator {
-			 compatible = "fixed-clock";
-			 #clock-cells = <0>;
-			 clock-frequency = <32768>;
-	       };
+		g762_clk: g762-oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
 	};
 
 	gpio-leds {
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/marvell/armada-xp-openblocks-ax3-4.dts
index 0efcc166dabf..1ecf72a61bca 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/marvell/armada-xp-openblocks-ax3-4.dts
@@ -97,12 +97,10 @@
 				};
 			};
 
-			gpio_keys {
+			gpio-keys {
 				compatible = "gpio-keys";
-				#address-cells = <1>;
-				#size-cells = <0>;
 
-				init {
+				button-init {
 					label = "Init Button";
 					linux,code = <KEY_POWER>;
 					gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/marvell/armada-xp-synology-ds414.dts
index 809e821d7399..1b65059794bf 100644
--- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts
+++ b/arch/arm/boot/dts/marvell/armada-xp-synology-ds414.dts
@@ -109,65 +109,60 @@
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&sata1_pwr_pin &sata2_pwr_pin
-			     &sata3_pwr_pin &sata4_pwr_pin>;
+	sata1_regulator: sata1-regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "SATA1 Power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		startup-delay-us = <2000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&sata1_pwr_pin>;
 		pinctrl-names = "default";
+	};
 
-		sata1_regulator: sata1-regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "SATA1 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			startup-delay-us = <2000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-		};
-
-		sata2_regulator: sata2-regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "SATA2 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			startup-delay-us = <4000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-		};
+	sata2_regulator: sata2-regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "SATA2 Power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		startup-delay-us = <4000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&sata2_pwr_pin>;
+		pinctrl-names = "default";
+	};
 
-		sata3_regulator: sata3-regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "SATA3 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			startup-delay-us = <6000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-		};
+	sata3_regulator: sata3-regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "SATA3 Power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		startup-delay-us = <6000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&sata3_pwr_pin>;
+		pinctrl-names = "default";
+	};
 
-		sata4_regulator: sata4-regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "SATA4 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			startup-delay-us = <8000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
-		};
+	sata4_regulator: sata4-regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "SATA4 Power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		startup-delay-us = <8000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&sata4_pwr_pin>;
+		pinctrl-names = "default";
 	};
 };
 
@@ -274,7 +269,7 @@
 &spi0 {
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "micron,n25q064", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/marvell/armada-xp.dtsi
index 6c19984d668e..4297482da62f 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-xp.dtsi
@@ -260,6 +260,7 @@
 	compatible = "marvell,armada-xp-wdt";
 	clocks = <&coreclk 2>, <&refclk>;
 	clock-names = "nbclk", "fixed";
+	interrupts = <93>, <38>;
 };
 
 &cpurst {
diff --git a/arch/arm/boot/dts/dove-cm-a510.dtsi b/arch/arm/boot/dts/marvell/dove-cm-a510.dtsi
index 9b9dfbe07be4..621cb145a8f6 100644
--- a/arch/arm/boot/dts/dove-cm-a510.dtsi
+++ b/arch/arm/boot/dts/marvell/dove-cm-a510.dtsi
@@ -101,32 +101,34 @@
 		pinctrl-0 = <&pmx_nand_gpo>;
 		pinctrl-names = "default";
 
-		system {
+		led-system {
 			label = "cm-a510:system:green";
 			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		wifi_power: regulator@1 {
-			compatible = "regulator-fixed";
-			regulator-name = "WiFi Power";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio2 7 GPIO_ACTIVE_HIGH>;
-		};
+	wifi_power: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "WiFi Power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 7 GPIO_ACTIVE_HIGH>;
 	};
 };
 
 /* Optional RTL8211D GbE PHY on SMI address 0x03 */
-&ethphy {
-	reg = <3>;
-	status = "disabled";
+&mdio {
+	ethphy: ethernet-phy@3 {
+		reg = <3>;
+		status = "disabled";
+	};
+};
+
+&eth {
+	ethernet-port@0 {
+		phy-handle = <&ethphy>;
+	};
 };
 
 &i2c0 {
diff --git a/arch/arm/boot/dts/dove-cubox-es.dts b/arch/arm/boot/dts/marvell/dove-cubox-es.dts
index ad361ec1361d..ad361ec1361d 100644
--- a/arch/arm/boot/dts/dove-cubox-es.dts
+++ b/arch/arm/boot/dts/marvell/dove-cubox-es.dts
diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/marvell/dove-cubox.dts
index 3e1584e787ae..bcaaf8320c45 100644
--- a/arch/arm/boot/dts/dove-cubox.dts
+++ b/arch/arm/boot/dts/marvell/dove-cubox.dts
@@ -21,31 +21,24 @@
 		pinctrl-0 = <&pmx_gpio_18>;
 		pinctrl-names = "default";
 
-		power {
+		led-power {
 			label = "Power";
 			gpios = <&gpio0 18 1>;
 			default-state = "keep";
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usb_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 1 0>;
-			pinctrl-0 = <&pmx_gpio_1>;
-			pinctrl-names = "default";
-		};
+	usb_power: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "USB Power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio0 1 0>;
+		pinctrl-0 = <&pmx_gpio_1>;
+		pinctrl-names = "default";
 	};
 
 	clocks {
@@ -72,11 +65,18 @@
 &uart0 { status = "okay"; };
 &sata0 { status = "okay"; };
 &mdio { status = "okay"; };
-&eth { status = "okay"; };
+&eth {
+	status = "okay";
+	ethernet-port@0 {
+		phy-handle = <&ethphy>;
+	};
+};
 
-&ethphy {
-	compatible = "marvell,88e1310";
-	reg = <1>;
+&mdio {
+	ethphy: ethernet-phy@1 {
+		compatible = "marvell,88e1310";
+		reg = <1>;
+	};
 };
 
 &gpu {
@@ -101,7 +101,7 @@
 		/* connect xtal input as source of pll0 and pll1 */
 		silabs,pll-source = <0 0>, <1 0>;
 
-		clkout0 {
+		clkout@0 {
 			reg = <0>;
 			silabs,drive-strength = <8>;
 			silabs,multisynth-source = <0>;
@@ -109,7 +109,7 @@
 			silabs,pll-master;
 		};
 
-		clkout2 {
+		clkout@2 {
 			reg = <2>;
 			silabs,drive-strength = <8>;
 			silabs,multisynth-source = <1>;
@@ -127,7 +127,7 @@
 	status = "okay";
 
 	/* spi0.0: 4M Flash Winbond W25Q32BV */
-	spi-flash@0 {
+	flash@0 {
 		compatible = "st,w25q32";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/dove-d2plug.dts b/arch/arm/boot/dts/marvell/dove-d2plug.dts
index 273f12ca2512..79ee2b32409d 100644
--- a/arch/arm/boot/dts/dove-d2plug.dts
+++ b/arch/arm/boot/dts/marvell/dove-d2plug.dts
@@ -21,17 +21,17 @@
 		pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>;
 		pinctrl-names = "default";
 
-		wlan-ap {
+		led-wlan-ap {
 			label = "wlan-ap";
 			gpios = <&gpio0 0 1>;
 		};
 
-		wlan-act {
+		led-wlan-act {
 			label = "wlan-act";
 			gpios = <&gpio0 1 1>;
 		};
 
-		bluetooth-act {
+		led-bluetooth-act {
 			label = "bt-act";
 			gpios = <&gpio0 2 1>;
 		};
@@ -62,7 +62,7 @@
 	status = "okay";
 
 	/* spi0.0: 4M Flash Macronix MX25L3205D */
-	spi-flash@0 {
+	flash@0 {
 		compatible = "st,m25l3205d";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/marvell/dove-d3plug.dts b/arch/arm/boot/dts/marvell/dove-d3plug.dts
new file mode 100644
index 000000000000..a451fd576990
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/dove-d3plug.dts
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "dove.dtsi"
+
+/ {
+	model = "Globalscale D3Plug";
+	compatible = "globalscale,d3plug", "marvell,dove";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/mmcblk0p2 rw rootwait";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>;
+		pinctrl-names = "default";
+
+		led-wlan-act {
+			label = "wlan-act";
+			gpios = <&gpio0 0 1>;
+		};
+
+		led-wlan-ap {
+			label = "wlan-ap";
+			gpios = <&gpio0 1 1>;
+		};
+
+		led-status {
+			label = "status";
+			gpios = <&gpio0 2 1>;
+		};
+	};
+
+	usb_power: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "USB Power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio0 8 0>;
+		pinctrl-0 = <&pmx_gpio_8>;
+		pinctrl-names = "default";
+	};
+};
+
+&uart0 { status = "okay"; };
+&sata0 { status = "okay"; };
+&i2c0 { status = "okay"; };
+
+/* Samsung M8G2F eMMC */
+&sdio0 {
+	status = "okay";
+	non-removable;
+	bus-width = <4>;
+};
+
+/* Marvell SD8787 WLAN/BT */
+&sdio1 {
+	status = "okay";
+	non-removable;
+};
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 2M Flash Macronix MX25L1605D */
+	flash@0 {
+		compatible = "st,m25l1605d";
+		spi-max-frequency = <86000000>;
+		reg = <0>;
+	};
+};
+
+&pcie {
+	status = "okay";
+	/* Fresco Logic USB3.0 xHCI controller */
+	pcie@1 {
+		status = "okay";
+		reset-gpios = <&gpio0 26 1>;
+		reset-delay-us = <20000>;
+		pinctrl-0 = <&pmx_camera_gpio>;
+		pinctrl-names = "default";
+	};
+	/* Mini-PCIe slot */
+	pcie@2 {
+		status = "okay";
+		reset-gpios = <&gpio0 25 1>;
+	};
+};
diff --git a/arch/arm/boot/dts/dove-dove-db.dts b/arch/arm/boot/dts/marvell/dove-dove-db.dts
index 1754a62e014e..c1912dc6bfc3 100644
--- a/arch/arm/boot/dts/dove-dove-db.dts
+++ b/arch/arm/boot/dts/marvell/dove-dove-db.dts
@@ -27,7 +27,7 @@
 	status = "okay";
 
 	/* spi0.0: 4M Flash ST-M25P32-VMF6P */
-	spi-flash@0 {
+	flash@0 {
 		compatible = "st,m25p32";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/dove-sbc-a510.dts b/arch/arm/boot/dts/marvell/dove-sbc-a510.dts
index df021f9b0117..8585ee5533bf 100644
--- a/arch/arm/boot/dts/dove-sbc-a510.dts
+++ b/arch/arm/boot/dts/marvell/dove-sbc-a510.dts
@@ -76,22 +76,20 @@
 		stdout-path = &uart0;
 	};
 
-	regulators {
-		usb0_power: regulator@2 {
-			compatible = "regulator-fixed";
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio_ext 0 GPIO_ACTIVE_HIGH>;
-		};
-
-		mmc_power: regulator@3 {
-			compatible = "regulator-fixed";
-			regulator-name = "MMC Power";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio_ext 13 GPIO_ACTIVE_HIGH>;
-		};
+	usb0_power: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "USB Power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio_ext 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	mmc_power: regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "MMC Power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio_ext 13 GPIO_ACTIVE_HIGH>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/marvell/dove.dtsi
index 89e0bdaf3a85..062c86361640 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/marvell/dove.dtsi
@@ -122,14 +122,24 @@
 				bus-range = <0x00 0xff>;
 
 				#interrupt-cells = <1>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 16>;
+				interrupt-names = "intx", "error";
+				interrupts = <16>, <15>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie0_intc 0>,
+						<0 0 0 2 &pcie0_intc 1>,
+						<0 0 0 3 &pcie0_intc 2>,
+						<0 0 0 4 &pcie0_intc 3>;
+
+				pcie0_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie1: pcie@2 {
 				device_type = "pci";
 				status = "disabled";
-				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x80000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				clocks = <&gate_clk 5>;
 				marvell,pcie-port = <1>;
@@ -141,8 +151,18 @@
 				bus-range = <0x00 0xff>;
 
 				#interrupt-cells = <1>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 18>;
+				interrupt-names = "intx", "error";
+				interrupts = <18>, <17>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 
@@ -362,7 +382,6 @@
 					interrupts = <29>;
 					/* overwrite MAC address in bootloader */
 					local-mac-address = [00 00 00 00 00 00];
-					phy-handle = <&ethphy>;
 				};
 			};
 
@@ -374,10 +393,6 @@
 				interrupts = <30>;
 				clocks = <&gate_clk 2>;
 				status = "disabled";
-
-				ethphy: ethernet-phy {
-					/* set phy address in board file */
-				};
 			};
 
 			sdio0: sdio-host@92000 {
@@ -407,7 +422,7 @@
 				clocks = <&gate_clk 3>;
 				clock-names = "sata";
 				#phy-cells = <0>;
-				status = "ok";
+				status = "okay";
 			};
 
 			audio0: audio-controller@b0000 {
diff --git a/arch/arm/boot/dts/marvell/kirkwood-4i-edge-200.dts b/arch/arm/boot/dts/marvell/kirkwood-4i-edge-200.dts
new file mode 100644
index 000000000000..b1749d3f60b7
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-4i-edge-200.dts
@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Endian 4i Edge 200 Board Description
+ * Note: Endian UTM Mini is hardware clone of Endian Edge 200
+ * Copyright 2021-2022 Pawel Dembicki <paweldembicki@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Endian 4i Edge 200";
+	compatible = "endian,4i-edge-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led>;
+		pinctrl-names = "default";
+
+		led-1 {
+			function = LED_FUNCTION_SD;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+		};
+
+		led-2 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-3 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&eth0 {
+	status = "okay";
+};
+
+&eth0port {
+	speed = <1000>;
+	duplex = <1>;
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&eth1port {
+	phy-handle = <&ethphyb>;
+};
+
+&mdio {
+	status = "okay";
+
+	ethphyb: ethernet-phy@b {
+		reg = <0x0b>;
+
+		marvell,reg-init =
+			/* link-activity, bi-color mode 4 */
+			<3 0x10 0xfff0 0xf>; /* Reg 3,16 <- 0xzzzf */
+	};
+
+	switch0: switch@11 {
+		compatible = "marvell,mv88e6085";
+		reg = <0x11>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "port1";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "port2";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "port3";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "port4";
+			};
+
+			port@5 {
+				reg = <5>;
+				phy-mode = "rgmii-id";
+				ethernet = <&eth0port>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x00000000 0x000a0000>;
+		read-only;
+	};
+
+	partition@a0000 {
+		label = "u-boot-env";
+		reg = <0x000a0000 0x00060000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "kernel";
+		reg = <0x00100000 0x00400000>;
+	};
+
+	partition@500000 {
+		label = "ubi";
+		reg = <0x00500000 0x1fb00000>;
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-0 = <&pmx_sysrst>;
+	pinctrl-names = "default";
+
+	pmx_sysrst: pmx-sysrst {
+		marvell,pins = "mpp6";
+		marvell,function = "sysrst";
+	};
+
+	pmx_sdio_cd: pmx-sdio-cd {
+		marvell,pins = "mpp28";
+		marvell,function = "gpio";
+	};
+
+	pmx_led: pmx-led {
+		marvell,pins = "mpp34", "mpp35", "mpp49";
+		marvell,function = "gpio";
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sata_phy0 {
+	status = "disabled";
+};
+
+&sata_phy1 {
+	status = "disabled";
+};
+
+&sdio {
+	pinctrl-0 = <&pmx_sdio_cd>;
+	pinctrl-names = "default";
+	status = "okay";
+	cd-gpios = <&gpio0 28 9>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-6192.dtsi b/arch/arm/boot/dts/marvell/kirkwood-6192.dtsi
index 396bcba08adb..705c0d7effed 100644
--- a/arch/arm/boot/dts/kirkwood-6192.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-6192.dtsi
@@ -26,12 +26,22 @@
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 9>;
+				interrupt-names = "intx", "error";
+				interrupts = <9>, <44>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie_intc 0>,
+						<0 0 0 2 &pcie_intc 1>,
+						<0 0 0 3 &pcie_intc 2>,
+						<0 0 0 4 &pcie_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gate_clk 2>;
 				status = "disabled";
+
+				pcie_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/marvell/kirkwood-6281.dtsi
index faa05849a40d..8e311165fd13 100644
--- a/arch/arm/boot/dts/kirkwood-6281.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-6281.dtsi
@@ -26,12 +26,22 @@
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 9>;
+				interrupt-names = "intx", "error";
+				interrupts = <9>, <44>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie_intc 0>,
+						<0 0 0 2 &pcie_intc 1>,
+						<0 0 0 3 &pcie_intc 2>,
+						<0 0 0 4 &pcie_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gate_clk 2>;
 				status = "disabled";
+
+				pcie_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/marvell/kirkwood-6282.dtsi
index e84c54b77dea..e33723160ce7 100644
--- a/arch/arm/boot/dts/kirkwood-6282.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-6282.dtsi
@@ -30,12 +30,22 @@
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 9>;
+				interrupt-names = "intx", "error";
+				interrupts = <9>, <44>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie0_intc 0>,
+						<0 0 0 2 &pcie0_intc 1>,
+						<0 0 0 3 &pcie0_intc 2>,
+						<0 0 0 4 &pcie0_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gate_clk 2>;
 				status = "disabled";
+
+				pcie0_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie1: pcie@2,0 {
@@ -48,12 +58,22 @@
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 10>;
+				interrupt-names = "intx", "error";
+				interrupts = <10>, <45>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gate_clk 18>;
 				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi b/arch/arm/boot/dts/marvell/kirkwood-98dx4122.dtsi
index 299c147298c3..c3469a2fc58a 100644
--- a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-98dx4122.dtsi
@@ -26,12 +26,22 @@
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 9>;
+				interrupt-names = "intx", "error";
+				interrupts = <9>, <44>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie_intc 0>,
+						<0 0 0 2 &pcie_intc 1>,
+						<0 0 0 3 &pcie_intc 2>,
+						<0 0 0 4 &pcie_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gate_clk 2>;
 				status = "disabled";
+
+				pcie_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/kirkwood-b3.dts b/arch/arm/boot/dts/marvell/kirkwood-b3.dts
index a7636fe28501..681343c1357a 100644
--- a/arch/arm/boot/dts/kirkwood-b3.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-b3.dts
@@ -187,7 +187,7 @@
 
 /* Wifi model has Atheros chipset on pcie port */
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts b/arch/arm/boot/dts/marvell/kirkwood-blackarmor-nas220.dts
index 07fbfca444d5..36b90c632fd6 100644
--- a/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-blackarmor-nas220.dts
@@ -35,13 +35,13 @@
 	gpio_keys {
 		compatible = "gpio-keys";
 
-		reset {
+		button-reset {
 			label = "Reset";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
 		};
 
-		button {
+		button-power {
 			label = "Power";
 			linux,code = <KEY_SLEEP>;
 			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
@@ -51,7 +51,7 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		blue-power {
+		led-blue-power {
 			label = "nas220:blue:power";
 			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
diff --git a/arch/arm/boot/dts/marvell/kirkwood-c200-v1.dts b/arch/arm/boot/dts/marvell/kirkwood-c200-v1.dts
new file mode 100644
index 000000000000..7e3ee64d4bdf
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-c200-v1.dts
@@ -0,0 +1,310 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Ctera C200 V1 Board Description
+ * Copyright 2021-2022 Pawel Dembicki <paweldembicki@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Ctera C200 V1";
+	compatible = "ctera,c200-v1", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_buttons>;
+		pinctrl-names = "default";
+
+		button-power {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+		};
+
+		button-reset {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+		};
+
+		button-usb1 {
+			label = "USB1 Button";
+			linux,code = <BTN_0>;
+			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
+		};
+
+		button-usb2 {
+			label = "USB2 Button";
+			linux,code = <BTN_1>;
+			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_poweroff>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_leds>;
+		pinctrl-names = "default";
+
+		led-0 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+		};
+
+		led-2 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+		};
+
+		led-3 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+		};
+
+		led-4 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+		};
+
+		led-6 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+		};
+
+		led-7 {
+			function = LED_FUNCTION_DISK_ERR;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		};
+
+		led-8 {
+			function = LED_FUNCTION_DISK_ERR;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		};
+
+		led-9 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+		};
+
+		led-10 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "usbport";
+			trigger-sources = <&hub_port2>;
+		};
+
+		led-11 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+		};
+
+		led-12 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "usbport";
+			trigger-sources = <&hub_port1>;
+		};
+	};
+};
+
+&eth0 {
+	status = "okay";
+};
+
+&eth0port {
+	phy-handle = <&ethphy9>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	rtc@30 {
+		compatible = "s35390a";
+		reg = <0x30>;
+	};
+
+	lm63@4c {
+		compatible = "national,lm63";
+		reg = <0x4c>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy9: ethernet-phy@9 {
+		reg = <9>;
+	};
+};
+
+&nand {
+	status = "okay";
+	chip-delay = <40>;
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0000000 0x200000>;
+	};
+
+	partition@200000 {
+		label = "certificate";
+		reg = <0x0200000 0x100000>;
+	};
+
+	partition@300000 {
+		label = "preset_cfg";
+		reg = <0x0300000 0x100000>;
+	};
+
+	partition@400000 {
+		label = "dev_params";
+		reg = <0x0400000 0x100000>;
+	};
+
+	partition@500000 {
+		label = "active_bank";
+		reg = <0x0500000 0x0100000>;
+	};
+
+	partition@600000 {
+		label = "magic";
+		reg = <0x0600000 0x0100000>;
+	};
+
+	partition@700000 {
+		label = "bank1";
+		reg = <0x0700000 0x2800000>;
+	};
+
+	partition@2f00000 {
+		label = "bank2";
+		reg = <0x2f00000 0x2800000>;
+	};
+
+	/* 0x5700000-0x5a00000 undefined in vendor firmware */
+
+	partition@5a00000 {
+		label = "reserved";
+		reg = <0x5a00000 0x2000000>;
+	};
+
+	partition@7a00000 {
+		label = "rootfs";
+		reg = <0x7a00000 0x8600000>;
+	};
+};
+
+&pinctrl {
+	/* Buzzer gpios are connected to two pins of buzzer.
+	 * This buzzer require a modulated signal from gpio.
+	 * Leave it as is due lack of proper driver.
+	 */
+	pmx_buzzer: pmx-buzzer {
+		marvell,pins = "mpp12", "mpp13";
+		marvell,function = "gpio";
+	};
+
+	pmx_leds: pmx-leds {
+		marvell,pins = "mpp14", "mpp15", "mpp16", "mpp17", "mpp38",
+			       "mpp39", "mpp40", "mpp42", "mpp43", "mpp44",
+			       "mpp45", "mpp46", "mpp47";
+		marvell,function = "gpio";
+	};
+
+	pmx_buttons: pmx-buttons {
+		marvell,pins = "mpp28", "mpp29", "mpp48", "mpp49";
+		marvell,function = "gpio";
+	};
+
+	pmx_poweroff: pmx-poweroff {
+		marvell,pins = "mpp34";
+		marvell,function = "gpio";
+	};
+};
+
+&rtc {
+	status = "disabled";
+};
+
+&sata {
+	status = "okay";
+	nr-ports = <2>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	port@1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <1>;
+		#trigger-source-cells = <0>;
+
+		hub_port1: port@1 {
+			reg = <1>;
+			#trigger-source-cells = <0>;
+		};
+
+		hub_port2: port@2 {
+			reg = <2>;
+			#trigger-source-cells = <0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-cloudbox.dts b/arch/arm/boot/dts/marvell/kirkwood-cloudbox.dts
index 448b0cd23b5f..151edcd140a0 100644
--- a/arch/arm/boot/dts/kirkwood-cloudbox.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-cloudbox.dts
@@ -58,10 +58,8 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		power {
+		key-power {
 			label = "Power push button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
@@ -71,11 +69,11 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		red-fail {
+		led-red-fail {
 			label = "cloudbox:red:fail";
 			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
 		};
-		blue-sata {
+		led-blue-sata {
 			label = "cloudbox:blue:sata";
 			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/kirkwood-d2net.dts b/arch/arm/boot/dts/marvell/kirkwood-d2net.dts
index bd3b266dd766..fcce8730d3e3 100644
--- a/arch/arm/boot/dts/kirkwood-d2net.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-d2net.dts
@@ -37,7 +37,7 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		red-fail {
+		led-red-fail {
 			label = "d2net_v2:red:fail";
 			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/kirkwood-db-88f6281.dts b/arch/arm/boot/dts/marvell/kirkwood-db-88f6281.dts
index 2adb17c955aa..a9a8e6b744c7 100644
--- a/arch/arm/boot/dts/kirkwood-db-88f6281.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-db-88f6281.dts
@@ -18,7 +18,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-db-88f6282.dts b/arch/arm/boot/dts/marvell/kirkwood-db-88f6282.dts
index f84a48539917..6dc6579d4524 100644
--- a/arch/arm/boot/dts/kirkwood-db-88f6282.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-db-88f6282.dts
@@ -18,7 +18,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-db.dtsi b/arch/arm/boot/dts/marvell/kirkwood-db.dtsi
index 6fe2e31534af..8bacaeb4f4bd 100644
--- a/arch/arm/boot/dts/kirkwood-db.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-db.dtsi
@@ -39,7 +39,7 @@
 			status = "okay";
 		};
 
-		ehci@50000 {
+		usb@50000 {
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/kirkwood-dir665.dts b/arch/arm/boot/dts/marvell/kirkwood-dir665.dts
index b3ad3f607d31..36394d1ab3e2 100644
--- a/arch/arm/boot/dts/kirkwood-dir665.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-dir665.dts
@@ -78,7 +78,7 @@
 
 		spi@10600 {
 			status = "okay";
-			m25p80@0 {
+			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				compatible = "mxicy,mx25l12805d", "jedec,spi-nor";
@@ -129,7 +129,7 @@
 			status = "okay";
 		};
 
-		ehci@50000 {
+		usb@50000 {
 			status = "okay";
 		};
 	};
@@ -137,38 +137,38 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		blue-usb {
+		led-blue-usb {
 			label = "dir665:blue:usb";
 			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
 		};
-		blue-internet {
+		led-blue-internet {
 			/* Can only be turned on if the Internet
 			 * Ethernet port has Link
 			 */
 			label = "dir665:blue:internet";
 			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
 		};
-		amber-internet {
+		led-amber-internet {
 			label = "dir665:amber:internet";
 			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
 		};
-		blue-wifi5g {
+		led-blue-wifi5g {
 			label = "dir665:blue:5g";
 			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
 		};
-		blue-status {
+		led-blue-status {
 			label = "dir665:blue:status";
 			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
 		};
-		blue-wps {
+		led-blue-wps {
 			label = "dir665:blue:wps";
 			gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
 		};
-		amber-status {
+		led-amber-status {
 			label = "dir665:amber:status";
 			gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
 		};
-		blue-24g {
+		led-blue-24g {
 			label = "dir665:blue:24g";
 			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
 		};
@@ -176,15 +176,13 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		reset {
+		button-reset {
 			label = "reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
 		};
-		wps {
+		button-wps {
 			label = "wps";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
@@ -211,18 +209,18 @@
 			};
 
 			port@1 {
-			       reg = <1>;
-			       label = "lan3";
+				reg = <1>;
+				label = "lan3";
 			};
 
 			port@2 {
-			       reg = <2>;
-			       label = "lan2";
+				reg = <2>;
+				label = "lan2";
 			};
 
 			port@3 {
-			       reg = <3>;
-			       label = "lan1";
+				reg = <3>;
+				label = "lan1";
 			};
 
 			port@4 {
@@ -232,7 +230,7 @@
 
 			port@6 {
 				reg = <6>;
-				label = "cpu";
+				phy-mode = "rgmii-id";
 				ethernet = <&eth0port>;
 				fixed-link {
 					speed = <1000>;
@@ -251,6 +249,7 @@
 	ethernet0-port@0 {
 		speed = <1000>;
 		duplex = <1>;
+		phy-mode = "rgmii";
 	};
 };
 
@@ -268,7 +267,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-dns320.dts b/arch/arm/boot/dts/marvell/kirkwood-dns320.dts
index d6b0f418fd01..d8279e0c4c4f 100644
--- a/arch/arm/boot/dts/kirkwood-dns320.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-dns320.dts
@@ -24,24 +24,24 @@
 			     &pmx_led_white_usb>;
 		pinctrl-names = "default";
 
-		blue-power {
+		led-blue-power {
 			label = "dns320:blue:power";
 			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
 		};
-		blue-usb {
+		led-blue-usb {
 			label = "dns320:blue:usb";
 			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
 		};
-		orange-l_hdd {
+		led-orange-l_hdd {
 			label = "dns320:orange:l_hdd";
 			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
 		};
-		orange-r_hdd {
+		led-orange-r_hdd {
 			label = "dns320:orange:r_hdd";
 			gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
 		};
-		orange-usb {
+		led-orange-usb {
 			label = "dns320:orange:usb";
 			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; /* GPIO 35 */
 		};
diff --git a/arch/arm/boot/dts/kirkwood-dns325.dts b/arch/arm/boot/dts/marvell/kirkwood-dns325.dts
index 94d9c06cbbf5..7f396195e977 100644
--- a/arch/arm/boot/dts/kirkwood-dns325.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-dns325.dts
@@ -24,24 +24,24 @@
 			     &pmx_led_white_usb>;
 		pinctrl-names = "default";
 
-		white-power {
+		led-white-power {
 			label = "dns325:white:power";
 			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
 		};
-		white-usb {
+		led-white-usb {
 			label = "dns325:white:usb";
 			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; /* GPIO 43 */
 		};
-		red-l_hdd {
+		led-red-l_hdd {
 			label = "dns325:red:l_hdd";
 			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
 		};
-		red-r_hdd {
+		led-red-r_hdd {
 			label = "dns325:red:r_hdd";
 			gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
 		};
-		red-usb {
+		led-red-usb {
 			label = "dns325:red:usb";
 			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi
index eb917462b219..20bcd031f3f5 100644
--- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi
@@ -8,23 +8,21 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_button_power &pmx_button_unmount
 			     &pmx_button_reset>;
 		pinctrl-names = "default";
 
-		power {
+		button-power {
 			label = "Power button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
 		};
-		eject {
+		button-eject {
 			label = "USB unmount button";
 			linux,code = <KEY_EJECTCD>;
 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 		};
-		reset {
+		button-reset {
 			label = "Reset button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
@@ -38,9 +36,9 @@
 		pinctrl-names = "default";
 		gpios = <&gpio1 14 GPIO_ACTIVE_HIGH
 			 &gpio1 13 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <0    0
-				      3000 1
-				      6000 2>;
+		gpio-fan,speed-map = <0    0>,
+				     <3000 1>,
+				     <6000 2>;
 	};
 
 	gpio_poweroff {
diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/marvell/kirkwood-dockstar.dts
index 264938dfa4d9..090f1e2e5bb6 100644
--- a/arch/arm/boot/dts/kirkwood-dockstar.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-dockstar.dts
@@ -42,12 +42,12 @@
 		pinctrl-0 = <&pmx_led_green &pmx_led_orange>;
 		pinctrl-names = "default";
 
-		health {
+		led-health {
 			label = "status:green:health";
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
 		};
-		fault {
+		led-fault {
 			label = "status:orange:fault";
 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/marvell/kirkwood-dreamplug.dts
index 328516351e84..590bee3c561c 100644
--- a/arch/arm/boot/dts/kirkwood-dreamplug.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-dreamplug.dts
@@ -85,15 +85,15 @@
 			     &pmx_led_wifi_ap >;
 		pinctrl-names = "default";
 
-		bluetooth {
+		led-bluetooth {
 			label = "dreamplug:blue:bluetooth";
 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 		};
-		wifi {
+		led-wifi {
 			label = "dreamplug:green:wifi";
 			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
 		};
-		wifi-ap {
+		led-wifi-ap {
 			label = "dreamplug:green:wifi_ap";
 			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/kirkwood-ds109.dts b/arch/arm/boot/dts/marvell/kirkwood-ds109.dts
index 29982e7acb7f..29982e7acb7f 100644
--- a/arch/arm/boot/dts/kirkwood-ds109.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds109.dts
diff --git a/arch/arm/boot/dts/kirkwood-ds110jv10.dts b/arch/arm/boot/dts/marvell/kirkwood-ds110jv10.dts
index d68c616e9309..d68c616e9309 100644
--- a/arch/arm/boot/dts/kirkwood-ds110jv10.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds110jv10.dts
diff --git a/arch/arm/boot/dts/kirkwood-ds111.dts b/arch/arm/boot/dts/marvell/kirkwood-ds111.dts
index e1420cbcd7e4..e1420cbcd7e4 100644
--- a/arch/arm/boot/dts/kirkwood-ds111.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds111.dts
diff --git a/arch/arm/boot/dts/kirkwood-ds112.dts b/arch/arm/boot/dts/marvell/kirkwood-ds112.dts
index f48609e95afe..3912f1b525b6 100644
--- a/arch/arm/boot/dts/kirkwood-ds112.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds112.dts
@@ -43,7 +43,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie1 {
diff --git a/arch/arm/boot/dts/kirkwood-ds209.dts b/arch/arm/boot/dts/marvell/kirkwood-ds209.dts
index f41fe95e055f..f41fe95e055f 100644
--- a/arch/arm/boot/dts/kirkwood-ds209.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds209.dts
diff --git a/arch/arm/boot/dts/kirkwood-ds210.dts b/arch/arm/boot/dts/marvell/kirkwood-ds210.dts
index 729f959a7838..729f959a7838 100644
--- a/arch/arm/boot/dts/kirkwood-ds210.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds210.dts
diff --git a/arch/arm/boot/dts/kirkwood-ds212.dts b/arch/arm/boot/dts/marvell/kirkwood-ds212.dts
index 416bab50d170..416bab50d170 100644
--- a/arch/arm/boot/dts/kirkwood-ds212.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds212.dts
diff --git a/arch/arm/boot/dts/kirkwood-ds212j.dts b/arch/arm/boot/dts/marvell/kirkwood-ds212j.dts
index 14cf4d8afaf3..14cf4d8afaf3 100644
--- a/arch/arm/boot/dts/kirkwood-ds212j.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds212j.dts
diff --git a/arch/arm/boot/dts/kirkwood-ds409.dts b/arch/arm/boot/dts/marvell/kirkwood-ds409.dts
index a8650f9e3eb7..a8650f9e3eb7 100644
--- a/arch/arm/boot/dts/kirkwood-ds409.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds409.dts
diff --git a/arch/arm/boot/dts/kirkwood-ds409slim.dts b/arch/arm/boot/dts/marvell/kirkwood-ds409slim.dts
index 27a1d840bd15..27a1d840bd15 100644
--- a/arch/arm/boot/dts/kirkwood-ds409slim.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds409slim.dts
diff --git a/arch/arm/boot/dts/kirkwood-ds411.dts b/arch/arm/boot/dts/marvell/kirkwood-ds411.dts
index 86907be70cf9..1d4256ef325d 100644
--- a/arch/arm/boot/dts/kirkwood-ds411.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds411.dts
@@ -47,7 +47,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie1 {
diff --git a/arch/arm/boot/dts/kirkwood-ds411j.dts b/arch/arm/boot/dts/marvell/kirkwood-ds411j.dts
index bb3200daea1e..bb3200daea1e 100644
--- a/arch/arm/boot/dts/kirkwood-ds411j.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds411j.dts
diff --git a/arch/arm/boot/dts/kirkwood-ds411slim.dts b/arch/arm/boot/dts/marvell/kirkwood-ds411slim.dts
index 9c5364a4e0a8..9c5364a4e0a8 100644
--- a/arch/arm/boot/dts/kirkwood-ds411slim.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ds411slim.dts
diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/marvell/kirkwood-goflexnet.dts
index d4cb3cd3e2a2..d5ac4e3974da 100644
--- a/arch/arm/boot/dts/kirkwood-goflexnet.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-goflexnet.dts
@@ -85,44 +85,44 @@
 			    >;
 		pinctrl-names = "default";
 
-		health {
+		led-health {
 			label = "status:green:health";
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
 		};
-		fault {
+		led-fault {
 			label = "status:orange:fault";
 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 		};
-		left0 {
+		led-left0 {
 			label = "status:white:left0";
 			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
 		};
-		left1 {
+		led-left1 {
 			label = "status:white:left1";
 			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
 		};
-		left2 {
+		led-left2 {
 			label = "status:white:left2";
 			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
 		};
-		left3 {
+		led-left3 {
 			label = "status:white:left3";
 			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
 		};
-		right0 {
+		led-right0 {
 			label = "status:white:right0";
 			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
 		};
-		right1 {
+		led-right1 {
 			label = "status:white:right1";
 			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 		};
-		right2 {
+		led-right2 {
 			label = "status:white:right2";
 			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 		};
-		right3 {
+		led-right3 {
 			label = "status:white:right3";
 			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts b/arch/arm/boot/dts/marvell/kirkwood-guruplug-server-plus.dts
index dfb41393941d..d5aa8b505cc0 100644
--- a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-guruplug-server-plus.dts
@@ -59,19 +59,19 @@
 			      &pmx_led_wmode_r &pmx_led_wmode_g >;
 		pinctrl-names = "default";
 
-		health-r {
+		led-health-r {
 			label = "guruplug:red:health";
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 		};
-		health-g {
+		led-health-g {
 			label = "guruplug:green:health";
 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 		};
-		wmode-r {
+		led-wmode-r {
 			label = "guruplug:red:wmode";
 			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
 		};
-		wmode-g {
+		led-wmode-g {
 			label = "guruplug:green:wmode";
 			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/marvell/kirkwood-ib62x0.dts
index 962a910a6f5c..018c6b8f3e8a 100644
--- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ib62x0.dts
@@ -58,17 +58,15 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_button_reset &pmx_button_usb_copy>;
 		pinctrl-names = "default";
 
-		copy {
+		button-copy {
 			label = "USB Copy";
 			linux,code = <KEY_COPY>;
 			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
 		};
-		reset {
+		button-reset {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
@@ -81,16 +79,16 @@
 			     &pmx_led_usb_transfer>;
 		pinctrl-names = "default";
 
-		green-os {
+		led-green-os {
 			label = "ib62x0:green:os";
 			gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
 		};
-		red-os {
+		led-red-os {
 			label = "ib62x0:red:os";
 			gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
 		};
-		usb-copy {
+		led-usb-copy {
 			label = "ib62x0:red:usb_copy";
 			gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/marvell/kirkwood-iconnect.dts
index 95af7aa1fdcb..91b46e77e0b6 100644
--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-iconnect.dts
@@ -89,32 +89,32 @@
 			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
-		power-blue {
+		led-power-blue {
 			label = "power:blue";
 			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
 		};
-		power-red {
+		led-power-red {
 			label = "power:red";
 			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
 		};
-		usb1 {
+		led-usb1 {
 			label = "usb1:blue";
 			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
 		};
-		usb2 {
+		led-usb2 {
 			label = "usb2:blue";
 			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
 		};
-		usb3 {
+		led-usb3 {
 			label = "usb3:blue";
 			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
 		};
-		usb4 {
+		led-usb4 {
 			label = "usb4:blue";
 			gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
 		};
-		otb {
+		led-otb {
 			label = "otb:blue";
 			gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
 		};
@@ -122,18 +122,16 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = < &pmx_button_reset &pmx_button_otb >;
 		pinctrl-names = "default";
 
-		otb {
+		button-otb {
 			label = "OTB Button";
 			linux,code = <KEY_COPY>;
 			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
 			debounce-interval = <100>;
 		};
-		reset {
+		button-reset {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
@@ -187,7 +185,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/marvell/kirkwood-iomega_ix2_200.dts
index 2338f495d517..039362152650 100644
--- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-iomega_ix2_200.dts
@@ -127,44 +127,42 @@
 			      &pmx_led_rebuild &pmx_led_health >;
 		pinctrl-names = "default";
 
-		power_led {
+		led-power-led {
 			label = "status:white:power_led";
 			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
 		};
-		rebuild_led {
+		led-rebuild-led {
 			label = "status:white:rebuild_led";
 			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
 		};
-		health_led {
+		led-health-led {
 			label = "status:red:health_led";
 			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
 		};
-		backup_led {
+		led-backup-led {
 			label = "status:blue:backup_led";
 			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
 		};
 	};
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_button_reset &pmx_button_power
 			     &pmx_button_otb>;
 		pinctrl-names = "default";
 
 
-		Power {
+		button-power {
 			label = "Power Button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
 		};
-		Reset {
+		button-reset {
 			label = "Reset Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
 		};
-		OTB {
+		button-otb {
 			label = "OTB Button";
 			linux,code = <KEY_COPY>;
 			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/kirkwood-is2.dts b/arch/arm/boot/dts/marvell/kirkwood-is2.dts
index 1bc16a5cdbaa..1bc16a5cdbaa 100644
--- a/arch/arm/boot/dts/kirkwood-is2.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-is2.dts
diff --git a/arch/arm/boot/dts/kirkwood-km_common.dtsi b/arch/arm/boot/dts/marvell/kirkwood-km_common.dtsi
index 75dc83914f56..259cb3d5f16d 100644
--- a/arch/arm/boot/dts/kirkwood-km_common.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-km_common.dtsi
@@ -27,8 +27,8 @@
 
 	i2c {
 		compatible = "i2c-gpio";
-		gpios = < &gpio0 8 GPIO_ACTIVE_HIGH		/* sda */
-			  &gpio0 9 GPIO_ACTIVE_HIGH>;		/* scl */
+		sda-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
 	};
 };
@@ -39,7 +39,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-km_fixedeth.dts b/arch/arm/boot/dts/marvell/kirkwood-km_fixedeth.dts
index 515be7bccc0a..515be7bccc0a 100644
--- a/arch/arm/boot/dts/kirkwood-km_fixedeth.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-km_fixedeth.dts
diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/marvell/kirkwood-km_kirkwood.dts
index f035eff1c111..f035eff1c111 100644
--- a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-km_kirkwood.dts
diff --git a/arch/arm/boot/dts/kirkwood-l-50.dts b/arch/arm/boot/dts/marvell/kirkwood-l-50.dts
index 0d81c43a6a73..974bc9de4702 100644
--- a/arch/arm/boot/dts/kirkwood-l-50.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-l-50.dts
@@ -62,9 +62,10 @@
 			status = "okay";
 			clock-frequency = <400000>;
 
-			gpio2: gpio-expander@20{
+			gpio2: gpio-expander@20 {
 				#gpio-cells = <2>;
 				#interrupt-cells = <2>;
+				interrupt-controller;
 				compatible = "semtech,sx1505q";
 				reg = <0x20>;
 
@@ -76,9 +77,10 @@
 			 * 5: mPCIE reset (active low)
 			 * 6: Express card reset (active low)
 			 */
-			gpio3: gpio-expander@21{
+			gpio3: gpio-expander@21 {
 				#gpio-cells = <2>;
 				#interrupt-cells = <2>;
+				interrupt-controller;
 				compatible = "semtech,sx1505q";
 				reg = <0x21>;
 
@@ -95,52 +97,52 @@
 	leds {
 		compatible = "gpio-leds";
 
-		status_green {
+		led-status-green {
 			label = "l-50:green:status";
 			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
 		};
 
-		status_red {
+		led-status-red {
 			label = "l-50:red:status";
 			gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
 		};
 
-		wifi {
+		led-wifi {
 			label = "l-50:green:wifi";
 			gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "phy0tpt";
 		};
 
-		internet_green {
+		led-internet-green {
 			label = "l-50:green:internet";
 			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
 		};
 
-		internet_red {
+		led-internet-red {
 			label = "l-50:red:internet";
 			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
 		};
 
-		usb1_green {
+		led-usb1-green {
 			label = "l-50:green:usb1";
 			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "usbport";
 			trigger-sources = <&hub_port3>;
 		};
 
-		usb1_red {
+		led-usb1-red {
 			label = "l-50:red:usb1";
 			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
 		};
 
-		usb2_green {
+		led-usb2-green {
 			label = "l-50:green:usb2";
 			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "usbport";
 			trigger-sources = <&hub_port1>;
 		};
 
-		usb2_red {
+		led-usb2-red {
 			label = "l-50:red:usb2";
 			gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
 		};
@@ -191,7 +193,7 @@
 	keys {
 		compatible = "gpio-keys";
 
-		factory_defaults {
+		button-factory-defaults {
 			label = "factory_defaults";
 			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_RESTART>;
@@ -223,18 +225,18 @@
 			};
 
 			port@1 {
-			       reg = <1>;
-			       label = "lan1";
+				reg = <1>;
+				label = "lan1";
 			};
 
 			port@2 {
-			       reg = <2>;
-			       label = "lan6";
+				reg = <2>;
+				label = "lan6";
 			};
 
 			port@3 {
-			       reg = <3>;
-			       label = "lan2";
+				reg = <3>;
+				label = "lan2";
 			};
 
 			port@4 {
@@ -254,7 +256,6 @@
 
 			port@6 {
 				reg = <6>;
-				label = "cpu";
 				phy-mode = "rgmii-id";
 				ethernet = <&eth1port>;
 				fixed-link {
@@ -282,18 +283,18 @@
 			};
 
 			port@1 {
-			       reg = <1>;
-			       label = "lan8";
+				reg = <1>;
+				label = "lan8";
 			};
 
 			port@2 {
-			       reg = <2>;
-			       label = "lan4";
+				reg = <2>;
+				label = "lan4";
 			};
 
 			port@3 {
-			       reg = <3>;
-			       label = "dmz";
+				reg = <3>;
+				label = "dmz";
 			};
 
 			switch1port5: port@5 {
@@ -330,6 +331,7 @@
 	ethernet1-port@0 {
 		speed = <1000>;
 		duplex = <1>;
+		phy-mode = "rgmii";
 	};
 };
 
diff --git a/arch/arm/boot/dts/kirkwood-laplug.dts b/arch/arm/boot/dts/marvell/kirkwood-laplug.dts
index 6158214a939a..90ea6cdee8e0 100644
--- a/arch/arm/boot/dts/kirkwood-laplug.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-laplug.dts
@@ -51,7 +51,7 @@
 	gpio_keys {
 		compatible = "gpio-keys";
 
-		power {
+		button-power {
 			label = "Power push button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
@@ -61,11 +61,11 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		red-fail {
+		led-red-fail {
 			label = "laplug_v2:red:power";
 			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
 		};
-		blue-power {
+		led-blue-power {
 			label = "laplug_v2:blue:power";
 			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
@@ -160,7 +160,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi b/arch/arm/boot/dts/marvell/kirkwood-linkstation-6282.dtsi
index 377b6e970259..dfac2045a1eb 100644
--- a/arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-linkstation-6282.dtsi
@@ -118,10 +118,11 @@
 		gpios = <&gpio0 17 GPIO_ACTIVE_LOW
 			 &gpio0 16 GPIO_ACTIVE_LOW>;
 
-		gpio-fan,speed-map = <0 3
-				1500 2
-				3250 1
-				5000 0>;
+		gpio-fan,speed-map =
+				<   0 3>,
+				<1500 2>,
+				<3250 1>,
+				<5000 0>;
 
 		alarm-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
 	};
diff --git a/arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi b/arch/arm/boot/dts/marvell/kirkwood-linkstation-duo-6281.dtsi
index ba629e02ba31..ba629e02ba31 100644
--- a/arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-linkstation-duo-6281.dtsi
diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lsqvl.dts
index 8bb381088910..8bb381088910 100644
--- a/arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lsqvl.dts
diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lsvl.dts
index 3f2a0bfe03ed..3f2a0bfe03ed 100644
--- a/arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lsvl.dts
diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswsxl.dts
index c42d0da38fe7..c42d0da38fe7 100644
--- a/arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswsxl.dts
diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswvl.dts
index e0f62adc0d5d..e0f62adc0d5d 100644
--- a/arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswvl.dts
diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswxl.dts
index c6024b569423..0425df8cb91c 100644
--- a/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswxl.dts
@@ -69,10 +69,11 @@
 		gpios = <&gpio1 16 GPIO_ACTIVE_LOW
 			 &gpio1 15 GPIO_ACTIVE_LOW>;
 
-		gpio-fan,speed-map = <0 3
-				1500 2
-				3250 1
-				5000 0>;
+		gpio-fan,speed-map =
+				<   0 3>,
+				<1500 2>,
+				<3250 1>,
+				<5000 0>;
 
 		alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 	};
diff --git a/arch/arm/boot/dts/kirkwood-linkstation.dtsi b/arch/arm/boot/dts/marvell/kirkwood-linkstation.dtsi
index 407d6d8b3a7f..8a11d2b9d449 100644
--- a/arch/arm/boot/dts/kirkwood-linkstation.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-linkstation.dtsi
@@ -88,8 +88,6 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_button_function &pmx_power_switch
 			     &pmx_power_auto_switch>;
 		pinctrl-names = "default";
@@ -156,7 +154,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-linksys-viper.dts b/arch/arm/boot/dts/marvell/kirkwood-linksys-viper.dts
index 2f9660f3b457..8a1c38ab6111 100644
--- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-linksys-viper.dts
@@ -33,18 +33,16 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = < &pmx_btn_wps &pmx_btn_reset >;
 		pinctrl-names = "default";
 
-		wps {
+		button-wps {
 			label = "WPS Button";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 		};
 
-		reset {
+		button-reset {
 			label = "Reset Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
@@ -56,12 +54,12 @@
 		pinctrl-0 = < &pmx_led_white_health &pmx_led_white_pulse >;
 		pinctrl-names = "default";
 
-		white-health {
+		led-white-health {
 			label = "viper:white:health";
 			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
 		};
 
-		white-pulse {
+		led-white-pulse {
 			label = "viper:white:pulse";
 			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
 		};
@@ -198,7 +196,7 @@
 
 			port@5 {
 				reg = <5>;
-				label = "cpu";
+				phy-mode = "rgmii-id";
 				ethernet = <&eth0port>;
 				fixed-link {
 					speed = <1000>;
@@ -221,6 +219,7 @@
 	ethernet0-port@0 {
 		speed = <1000>;
 		duplex = <1>;
+		phy-mode = "rgmii";
 	};
 };
 
diff --git a/arch/arm/boot/dts/kirkwood-lschlv2.dts b/arch/arm/boot/dts/marvell/kirkwood-lschlv2.dts
index 1d737d903f5f..1d737d903f5f 100644
--- a/arch/arm/boot/dts/kirkwood-lschlv2.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-lschlv2.dts
diff --git a/arch/arm/boot/dts/kirkwood-lsxhl.dts b/arch/arm/boot/dts/marvell/kirkwood-lsxhl.dts
index a56e0d797778..a56e0d797778 100644
--- a/arch/arm/boot/dts/kirkwood-lsxhl.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-lsxhl.dts
diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi
index 7b151acb9984..5e0b139dd4fb 100644
--- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi
@@ -10,6 +10,11 @@
 
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
+			/* Non-default UART pins */
+			pmx_uart0: pmx-uart0 {
+				marvell,pins = "mpp4", "mpp5";
+			};
+
 			pmx_power_hdd: pmx-power-hdd {
 				marvell,pins = "mpp10";
 				marvell,function = "gpo";
@@ -102,24 +107,22 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_button_function &pmx_power_switch
 			     &pmx_power_auto_switch>;
 		pinctrl-names = "default";
 
-		option {
+		button-option {
 			label = "Function Button";
 			linux,code = <KEY_OPTION>;
 			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
 		};
-		reserved {
+		button-reserved {
 			label = "Power-on Switch";
 			linux,code = <KEY_RESERVED>;
 			linux,input-type = <5>;
 			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
 		};
-		power {
+		button-power {
 			label = "Power-auto Switch";
 			linux,code = <KEY_ESC>;
 			linux,input-type = <5>;
@@ -134,28 +137,28 @@
 			     &pmx_led_function_blue>;
 		pinctrl-names = "default";
 
-		func_blue {
+		led-func-blue {
 			label = "lsxl:blue:func";
 			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 		};
 
-		alarm {
+		led-alarm {
 			label = "lsxl:red:alarm";
 			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
 		};
 
-		info {
+		led-info {
 			label = "lsxl:amber:info";
 			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
 		};
 
-		power {
+		led-power {
 			label = "lsxl:blue:power";
 			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
 		};
 
-		func_red {
+		led-func-red {
 			label = "lsxl:red:func";
 			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
 		};
@@ -167,10 +170,11 @@
 		pinctrl-names = "default";
 		gpios = <&gpio0 19 GPIO_ACTIVE_LOW
 		         &gpio0 18 GPIO_ACTIVE_LOW>;
-		gpio-fan,speed-map = <0    3
-		                      1500 2
-		                      3250 1
-		                      5000 0>;
+		gpio-fan,speed-map =
+				<0    3>,
+				<1500 2>,
+				<3250 1>,
+				<5000 0>;
 		alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 	};
 
@@ -213,22 +217,11 @@
 &mdio {
 	status = "okay";
 
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
 	ethphy1: ethernet-phy@8 {
 		reg = <8>;
 	};
 };
 
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
 &eth1 {
 	status = "okay";
 	ethernet1-port@0 {
diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/marvell/kirkwood-mplcec4.dts
index b80d12f6aa49..6533b49a15b2 100644
--- a/arch/arm/boot/dts/kirkwood-mplcec4.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-mplcec4.dts
@@ -8,10 +8,10 @@
 	model = "MPL CEC4";
 	compatible = "mpl,cec4-10", "mpl,cec4", "marvell,kirkwood-88f6281", "marvell,kirkwood";
 
-        memory {
-                device_type = "memory";
-                reg = <0x00000000 0x20000000>;
-        };
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
 
 	chosen {
 		bootargs = "console=ttyS0,115200n8 earlyprintk";
@@ -66,8 +66,8 @@
 			};
 		};
 
-                i2c@11000 {
-                        status = "okay";
+		i2c@11000 {
+			status = "okay";
 
 			rtc@51 {
 				compatible = "nxp,pcf8563";
@@ -79,7 +79,7 @@
 				reg = <0x57>;
 			};
 
-                };
+		};
 
 		serial@12000 {
 			status = "okay";
@@ -114,36 +114,36 @@
 			    >;
 		pinctrl-names = "default";
 
-		health {
+		led-health {
 			label = "status:green:health";
 			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
 		};
 
-		user1o {
+		led-user1o {
 			label = "user1:orange";
 			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 		};
 
-		user1g {
+		led-user1g {
 			label = "user1:green";
 			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 		};
 
-		user0o {
+		led-user0o {
 			label = "user0:orange";
 			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 		};
 
-		user0g {
+		led-user0g {
 			label = "user0:green";
 			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 		};
 
-		misc {
+		led-misc {
 			label = "status:orange:misc";
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 			default-state = "on";
@@ -208,7 +208,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts
index 2e1a75348908..051579fc36b8 100644
--- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts
@@ -63,7 +63,7 @@
 			status = "okay";
 		};
 
-		ehci@50000 {
+		usb@50000 {
 			status = "okay";
 		};
 	};
@@ -73,17 +73,17 @@
 		pinctrl-0 = <&pmx_leds &pmx_usb_led>;
 		pinctrl-names = "default";
 
-		green-status {
+		led-green-status {
 			label = "gtw:green:Status";
 			gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
 		};
 
-		red-status {
+		led-red-status {
 			label = "gtw:red:Status";
 			gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
 		};
 
-		green-usb {
+		led-green-usb {
 			label = "gtw:green:USB";
 			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
 		};
@@ -91,17 +91,15 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_keys>;
 		pinctrl-names = "default";
 
-		restart {
+		button-restart {
 			label = "SWR Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 		};
-		wps {
+		button-wps {
 			label = "WPS Button";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
@@ -149,7 +147,7 @@
 
 			port@5 {
 				reg = <5>;
-				label = "cpu";
+				phy-mode = "rgmii-id";
 				ethernet = <&eth0port>;
 				fixed-link {
 					speed = <1000>;
@@ -166,11 +164,12 @@
 	ethernet0-port@0 {
 		speed = <1000>;
 		duplex = <1>;
+		phy-mode = "rgmii";
 	};
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-nas2big.dts b/arch/arm/boot/dts/marvell/kirkwood-nas2big.dts
index 6a2934b7d0ce..0b0a15093146 100644
--- a/arch/arm/boot/dts/kirkwood-nas2big.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-nas2big.dts
@@ -131,7 +131,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-net2big.dts b/arch/arm/boot/dts/marvell/kirkwood-net2big.dts
index 3e3ac289e5b0..d5f6bb50ba11 100644
--- a/arch/arm/boot/dts/kirkwood-net2big.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-net2big.dts
@@ -46,11 +46,11 @@
 	};
 
 	clocks {
-	       g762_clk: g762-oscillator {
-			 compatible = "fixed-clock";
-			 #clock-cells = <0>;
-			 clock-frequency = <32768>;
-	       };
+		g762_clk: g762-oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/kirkwood-net5big.dts b/arch/arm/boot/dts/marvell/kirkwood-net5big.dts
index cba8a2b6f6d9..2497ad26b5b6 100644
--- a/arch/arm/boot/dts/kirkwood-net5big.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-net5big.dts
@@ -78,11 +78,11 @@
 	};
 
 	clocks {
-	       g762_clk: g762-oscillator {
-			 compatible = "fixed-clock";
-			 #clock-cells = <0>;
-			 clock-frequency = <32768>;
-	       };
+		g762_clk: g762-oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
 	};
 
 	netxbig-leds {
diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/marvell/kirkwood-netgear_readynas_duo_v2.dts
index cb564c3bcdc4..cb564c3bcdc4 100644
--- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-netgear_readynas_duo_v2.dts
diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts b/arch/arm/boot/dts/marvell/kirkwood-netgear_readynas_nv+_v2.dts
index b13aee570804..6cf76430cfab 100644
--- a/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-netgear_readynas_nv+_v2.dts
@@ -78,11 +78,11 @@
 		};
 
 		clocks {
-		       g762_clk: g762-oscillator {
-				 compatible = "fixed-clock";
-				 #clock-cells = <0>;
-				 clock-frequency = <8192>;
-		       };
+			g762_clk: g762-oscillator {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <8192>;
+			};
 		};
 
 		i2c@11000 {
@@ -266,7 +266,7 @@
 
 /* Connected to NEC uPD720200 USB 3.0 controller */
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-netxbig.dtsi b/arch/arm/boot/dts/marvell/kirkwood-netxbig.dtsi
index b5737026e244..d4edf2727388 100644
--- a/arch/arm/boot/dts/kirkwood-netxbig.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-netxbig.dtsi
@@ -53,26 +53,24 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		/*
 		 * esc and power represent a three position rocker
 		 * switch. Thus the conventional KEY_POWER does not fit
 		 */
-		exc {
+		button-exc {
 			label = "Back power switch (on|auto)";
 			linux,code = <KEY_ESC>;
 			linux,input-type = <5>;
 			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
 		};
-		power {
+		button-power {
 			label = "Back power switch (auto|off)";
 			linux,code = <KEY_1>;
 			linux,input-type = <5>;
 			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
 		};
-		option {
+		button-option {
 			label = "Function button";
 			linux,code = <KEY_OPTION>;
 			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi
index 51530ea86622..d6b615cf6390 100644
--- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi
@@ -55,10 +55,8 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		power {
+		button-power {
 			label = "Power push button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
@@ -68,7 +66,7 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		red-fail {
+		led-red-fail {
 			label = "ns2:red:fail";
 			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/kirkwood-ns2.dts b/arch/arm/boot/dts/marvell/kirkwood-ns2.dts
index 7b67083e1ec0..7b67083e1ec0 100644
--- a/arch/arm/boot/dts/kirkwood-ns2.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ns2.dts
diff --git a/arch/arm/boot/dts/kirkwood-ns2lite.dts b/arch/arm/boot/dts/marvell/kirkwood-ns2lite.dts
index b0cb5907ed63..686bcd6f0f3c 100644
--- a/arch/arm/boot/dts/kirkwood-ns2lite.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ns2lite.dts
@@ -24,7 +24,7 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		blue-sata {
+		led-blue-sata {
 			label = "ns2:blue:sata";
 			gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "disk-activity";
diff --git a/arch/arm/boot/dts/kirkwood-ns2max.dts b/arch/arm/boot/dts/marvell/kirkwood-ns2max.dts
index c0a087e77408..044958bc55da 100644
--- a/arch/arm/boot/dts/kirkwood-ns2max.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ns2max.dts
@@ -29,15 +29,15 @@
 			 &gpio1  1 GPIO_ACTIVE_LOW
 			 &gpio0 23 GPIO_ACTIVE_LOW>;
 		gpio-fan,speed-map =
-			<   0  0
-			 1500 15
-			 1700 14
-			 1800 13
-			 2100 12
-			 3100 11
-			 3300 10
-			 4300  9
-			 5500  8>;
+			<   0  0>,
+			<1500 15>,
+			<1700 14>,
+			<1800 13>,
+			<2100 12>,
+			<3100 11>,
+			<3300 10>,
+			<4300  9>,
+			<5500  8>;
 		alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
 	};
 
diff --git a/arch/arm/boot/dts/kirkwood-ns2mini.dts b/arch/arm/boot/dts/marvell/kirkwood-ns2mini.dts
index 5b9fa14b6428..3fbe008f9141 100644
--- a/arch/arm/boot/dts/kirkwood-ns2mini.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ns2mini.dts
@@ -30,15 +30,15 @@
 			 &gpio1  1 GPIO_ACTIVE_LOW
 			 &gpio0 23 GPIO_ACTIVE_LOW>;
 		gpio-fan,speed-map =
-			<   0  0
-			 3000 15
-			 3180 14
-			 4140 13
-			 4570 12
-			 6760 11
-			 7140 10
-			 7980  9
-			 9200  8>;
+			<   0  0>,
+			<3000 15>,
+			<3180 14>,
+			<4140 13>,
+			<4570 12>,
+			<6760 11>,
+			<7140 10>,
+			<7980  9>,
+			<9200  8>;
 		alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
 	};
 
diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/marvell/kirkwood-nsa310.dts
index 9b861c2e76c5..3555ac1c3b15 100644
--- a/arch/arm/boot/dts/kirkwood-nsa310.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-nsa310.dts
@@ -87,43 +87,43 @@
 			     &pmx_led_hdd_green &pmx_led_hdd_red>;
 		pinctrl-names = "default";
 
-		green-sys {
+		led-green-sys {
 			label = "nsa310:green:sys";
 			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
 		};
-		red-sys {
+		led-red-sys {
 			label = "nsa310:red:sys";
 			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
 		};
-		green-hdd {
+		led-green-hdd {
 			label = "nsa310:green:hdd";
 			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 		};
-		red-hdd {
+		led-red-hdd {
 			label = "nsa310:red:hdd";
 			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
 		};
-		green-esata {
+		led-green-esata {
 			label = "nsa310:green:esata";
 			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
 		};
-		red-esata {
+		led-red-esata {
 			label = "nsa310:red:esata";
 			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
 		};
-		green-usb {
+		led-green-usb {
 			label = "nsa310:green:usb";
 			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
 		};
-		red-usb {
+		led-red-usb {
 			label = "nsa310:red:usb";
 			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
 		};
-		green-copy {
+		led-green-copy {
 			label = "nsa310:green:copy";
 			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 		};
-		red-copy {
+		led-red-copy {
 			label = "nsa310:red:copy";
 			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 		};
@@ -131,7 +131,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-nsa310a.dts b/arch/arm/boot/dts/marvell/kirkwood-nsa310a.dts
index b85e314f045a..ddf84092aade 100644
--- a/arch/arm/boot/dts/kirkwood-nsa310a.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-nsa310a.dts
@@ -75,39 +75,39 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		green-sys {
+		led-green-sys {
 			label = "nsa310:green:sys";
 			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
 		};
-		red-sys {
+		led-red-sys {
 			label = "nsa310:red:sys";
 			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
 		};
-		green-hdd {
+		led-green-hdd {
 			label = "nsa310:green:hdd";
 			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 		};
-		red-hdd {
+		led-red-hdd {
 			label = "nsa310:red:hdd";
 			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
 		};
-		green-esata {
+		led-green-esata {
 			label = "nsa310:green:esata";
 			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
 		};
-		red-esata {
+		led-red-esata {
 			label = "nsa310:red:esata";
 			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
 		};
-		green-usb {
+		led-green-usb {
 			label = "nsa310:green:usb";
 			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
 		};
-		green-copy {
+		led-green-copy {
 			label = "nsa310:green:copy";
 			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 		};
-		red-copy {
+		led-red-copy {
 			label = "nsa310:red:copy";
 			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-nsa310s.dts b/arch/arm/boot/dts/marvell/kirkwood-nsa310s.dts
new file mode 100644
index 000000000000..47deb93c90a5
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-nsa310s.dts
@@ -0,0 +1,257 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * ZyXEL NSA310S Board Description
+ * Copyright 2020-2022 Pawel Dembicki <paweldembicki@gmail.com>
+ * Copyright (c) 2015-2021, Tony Dinh <mibodhi@gmail.com>
+ * Copyright (c) 2014, Adam Baker <linux@baker-net.org.uk>
+ * Based upon the board setup file created by Peter Schildmann
+ */
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "ZyXEL NSA310S";
+	compatible = "zyxel,nsa310s", "marvell,kirkwood-88f6702", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_pwr_off>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_buttons>;
+		pinctrl-names = "default";
+
+		button-power {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+		};
+
+		button-copy {
+			label = "Copy Button";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+		};
+
+		button-reset {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_leds>;
+		pinctrl-names = "default";
+
+		led-1 {
+			function = LED_FUNCTION_DISK_ERR;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			function = LED_FUNCTION_USB;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "usb-host";
+		};
+
+		led-3 {
+			function = LED_FUNCTION_DISK;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "ata1";
+		};
+
+		led-4 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-5 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-6 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-7 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	usb0_power: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "USB Power";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+	};
+
+	sata1_power: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "SATA1 Power";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	thermal-zones {
+		disk-thermal {
+			polling-delay = <20000>;
+			polling-delay-passive = <2000>;
+
+			thermal-sensors = <&hdd_temp>;
+
+			trips {
+				disk_alert: disk-alert {
+					temperature = <40000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+				disk_crit: disk-crit {
+					temperature = <60000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+
+&eth0 {
+	status = "okay";
+
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	rtc@68 {
+		compatible = "htk,ht1382";
+		reg = <0x68>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@1 {
+		reg = <1>;
+		phy-mode = "rgmii-id";
+		marvell,reg-init = <0x1 0x16 0x0 0x3>,
+				   <0x1 0x10 0x0 0x1017>,
+				   <0x1 0x11 0x0 0x4408>,
+				   <0x1 0x16 0x0 0x0>;
+	};
+};
+
+&nand {
+	status = "okay";
+	chip-delay = <35>;
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0000000 0x00c0000>;
+		read-only;
+	};
+	partition@c0000 {
+		label = "uboot_env";
+		reg = <0x00c0000 0x0080000>;
+	};
+	partition@140000 {
+		label = "ubi";
+		reg = <0x0140000 0x7ec0000>;
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+
+	pmx_buttons: pmx-buttons {
+		marvell,pins = "mpp24", "mpp25", "mpp26";
+		marvell,function = "gpio";
+	};
+
+	pmx_leds: pmx-leds {
+		marvell,pins = "mpp13", "mpp15", "mpp16", "mpp22", "mpp23",
+						"mpp28", "mpp29";
+		marvell,function = "gpio";
+	};
+
+	pmx_power: pmx-power {
+		marvell,pins = "mpp21", "mpp33";
+		marvell,function = "gpio";
+	};
+
+	pmx_pwr_off: pmx-pwr-off {
+		marvell,pins = "mpp27";
+		marvell,function = "gpio";
+	};
+};
+
+&rtc {
+	status = "disabled";
+};
+
+&sata {
+	status = "okay";
+	nr-ports = <1>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hdd_temp: sata-port@0 {
+		reg = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-nsa320.dts b/arch/arm/boot/dts/marvell/kirkwood-nsa320.dts
index b69b096f267b..dd5c8ffc8781 100644
--- a/arch/arm/boot/dts/kirkwood-nsa320.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-nsa320.dts
@@ -142,39 +142,39 @@
 			     &pmx_led_hdd1_green &pmx_led_hdd1_red>;
 		pinctrl-names = "default";
 
-		green-sys {
+		led-green-sys {
 			label = "nsa320:green:sys";
 			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
 		};
-		orange-sys {
+		led-orange-sys {
 			label = "nsa320:orange:sys";
 			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
 		};
-		green-hdd1 {
+		led-green-hdd1 {
 			label = "nsa320:green:hdd1";
 			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 		};
-		red-hdd1 {
+		led-red-hdd1 {
 			label = "nsa320:red:hdd1";
 			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
 		};
-		green-hdd2 {
+		led-green-hdd2 {
 			label = "nsa320:green:hdd2";
 			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
 		};
-		red-hdd2 {
+		led-red-hdd2 {
 			label = "nsa320:red:hdd2";
 			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
 		};
-		green-usb {
+		led-green-usb {
 			label = "nsa320:green:usb";
 			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
 		};
-		green-copy {
+		led-green-copy {
 			label = "nsa320:green:copy";
 			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 		};
-		red-copy {
+		led-red-copy {
 			label = "nsa320:red:copy";
 			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 		};
@@ -211,7 +211,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-nsa325.dts b/arch/arm/boot/dts/marvell/kirkwood-nsa325.dts
index 6f8085dbb1f4..f0786a5f2ce6 100644
--- a/arch/arm/boot/dts/kirkwood-nsa325.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-nsa325.dts
@@ -162,39 +162,39 @@
 			     &pmx_led_hdd1_green &pmx_led_hdd1_red>;
 		pinctrl-names = "default";
 
-		green-sys {
+		led-green-sys {
 			label = "nsa325:green:sys";
 			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
 		};
-		orange-sys {
+		led-orange-sys {
 			label = "nsa325:orange:sys";
 			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
 		};
-		green-hdd1 {
+		led-green-hdd1 {
 			label = "nsa325:green:hdd1";
 			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 		};
-		red-hdd1 {
+		led-red-hdd1 {
 			label = "nsa325:red:hdd1";
 			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
 		};
-		green-hdd2 {
+		led-green-hdd2 {
 			label = "nsa325:green:hdd2";
 			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
 		};
-		red-hdd2 {
+		led-red-hdd2 {
 			label = "nsa325:red:hdd2";
 			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
 		};
-		green-usb {
+		led-green-usb {
 			label = "nsa325:green:usb";
 			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
 		};
-		green-copy {
+		led-green-copy {
 			label = "nsa325:green:copy";
 			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 		};
-		red-copy {
+		led-red-copy {
 			label = "nsa325:red:copy";
 			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 		};
@@ -224,7 +224,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi b/arch/arm/boot/dts/marvell/kirkwood-nsa3x0-common.dtsi
index 8f73197f251a..e9bd9c551af5 100644
--- a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-nsa3x0-common.dtsi
@@ -63,22 +63,20 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
 		pinctrl-names = "default";
 
-		power {
+		button-power {
 			label = "Power Button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
 		};
-		copy {
+		button-copy {
 			label = "Copy Button";
 			linux,code = <KEY_COPY>;
 			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
 		};
-		reset {
+		button-reset {
 			label = "Reset Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
@@ -150,7 +148,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts
index 8ea430168ea5..20c6290d2037 100644
--- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts
@@ -115,10 +115,8 @@
 		compatible = "gpio-keys";
 		pinctrl-0 = <&pmx_gpio_init>;
 		pinctrl-names = "default";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		power {
+		button-power {
 			label = "Init Button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts
index 946f0f453dd1..2bc4b68bd723 100644
--- a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts
@@ -44,7 +44,7 @@
 		i2c@11100 {
 			status = "okay";
 
-			s24c02: s24c02@50 {
+			s24c02: eeprom@50 {
 				compatible = "atmel,24c02";
 				reg = <0x50>;
 			};
@@ -136,8 +136,6 @@
 		compatible = "gpio-keys";
 		pinctrl-0 = <&pmx_gpio_init>;
 		pinctrl-names = "default";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		button {
 			label = "Init Button";
diff --git a/arch/arm/boot/dts/kirkwood-openrd-base.dts b/arch/arm/boot/dts/marvell/kirkwood-openrd-base.dts
index 094191ece3d7..094191ece3d7 100644
--- a/arch/arm/boot/dts/kirkwood-openrd-base.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-openrd-base.dts
diff --git a/arch/arm/boot/dts/kirkwood-openrd-client.dts b/arch/arm/boot/dts/marvell/kirkwood-openrd-client.dts
index d4e0b8150a84..cf26e2ceaaa0 100644
--- a/arch/arm/boot/dts/kirkwood-openrd-client.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-openrd-client.dts
@@ -38,7 +38,7 @@
 		simple-audio-card,mclk-fs = <256>;
 
 		simple-audio-card,cpu {
-			sound-dai = <&audio0 0>;
+			sound-dai = <&audio0>;
 		};
 
 		simple-audio-card,codec {
diff --git a/arch/arm/boot/dts/kirkwood-openrd-ultimate.dts b/arch/arm/boot/dts/marvell/kirkwood-openrd-ultimate.dts
index 888e13320c19..888e13320c19 100644
--- a/arch/arm/boot/dts/kirkwood-openrd-ultimate.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-openrd-ultimate.dts
diff --git a/arch/arm/boot/dts/kirkwood-openrd.dtsi b/arch/arm/boot/dts/marvell/kirkwood-openrd.dtsi
index 47f03c69c55a..9d7cff4feada 100644
--- a/arch/arm/boot/dts/kirkwood-openrd.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-openrd.dtsi
@@ -53,7 +53,7 @@
 			cd-gpios = <&gpio0 29 9>;
 		};
 		gpio@10100 {
-			p28 {
+			p28-hog {
 				gpio-hog;
 				gpios = <28 GPIO_ACTIVE_HIGH>;
 				/*
@@ -71,7 +71,7 @@
 			};
 		};
 		gpio@10140 {
-			p2 {
+			p2-hog {
 				gpio-hog;
 				gpios = <2 GPIO_ACTIVE_HIGH>;
 				/*
diff --git a/arch/arm/boot/dts/kirkwood-pogo_e02.dts b/arch/arm/boot/dts/marvell/kirkwood-pogo_e02.dts
index f9e95e55f36d..39a5345332da 100644
--- a/arch/arm/boot/dts/kirkwood-pogo_e02.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-pogo_e02.dts
@@ -33,12 +33,12 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		health {
+		led-health {
 			label = "pogo_e02:green:health";
 			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
 		};
-		fault {
+		led-fault {
 			label = "pogo_e02:orange:fault";
 			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts b/arch/arm/boot/dts/marvell/kirkwood-pogoplug-series-4.dts
index 5aa4669ae254..0e9c4cf79822 100644
--- a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-pogoplug-series-4.dts
@@ -29,12 +29,10 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_button_eject>;
 		pinctrl-names = "default";
 
-		eject {
+		button-eject {
 			debounce-interval = <50>;
 			wakeup-source;
 			linux,code = <KEY_EJECTCD>;
@@ -48,12 +46,12 @@
 		pinctrl-0 = <&pmx_led_green &pmx_led_red>;
 		pinctrl-names = "default";
 
-		health {
+		led-health {
 			label = "pogoplugv4:green:health";
 			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 		};
-		fault {
+		led-fault {
 			label = "pogoplugv4:red:fault";
 			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-rd88f6192.dts b/arch/arm/boot/dts/marvell/kirkwood-rd88f6192.dts
new file mode 100644
index 000000000000..f00325ffde07
--- /dev/null
+++ b/arch/arm/boot/dts/marvell/kirkwood-rd88f6192.dts
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell RD88F6192 Board descrition
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file contains the definitions that are common between the three
+ * variants of the Marvell Kirkwood Development Board.
+ */
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6192.dtsi"
+
+/ {
+	model = "Marvell RD88F6192 reference design";
+	compatible = "marvell,rd88f6192", "marvell,kirkwood-88f6192", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-0 = <&pmx_usb_power>;
+			pinctrl-names = "default";
+
+			pmx_usb_power: pmx-usb-power {
+				marvell,pins = "mpp10";
+				marvell,function = "gpo";
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			m25p128@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "st,m25p128", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <20000000>;
+				mode = <0>;
+			};
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_usb_power>;
+		pinctrl-names = "default";
+
+		usb_power: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "USB VBUS";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		reg = <8>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts b/arch/arm/boot/dts/marvell/kirkwood-rd88f6281-a.dts
index 5da163591bbf..5da163591bbf 100644
--- a/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-rd88f6281-a.dts
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts b/arch/arm/boot/dts/marvell/kirkwood-rd88f6281-z0.dts
index 9d88301daf0e..72edd47e19ff 100644
--- a/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-rd88f6281-z0.dts
@@ -19,7 +19,7 @@
 };
 
 &eth1 {
-      status = "disabled";
+	status = "disabled";
 };
 
 &switch {
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi b/arch/arm/boot/dts/marvell/kirkwood-rd88f6281.dtsi
index f1f8eee132e8..9d62f910cddf 100644
--- a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-rd88f6281.dtsi
@@ -48,7 +48,7 @@
 			cd-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
 			/* No WP GPIO */
 		};
-       };
+	};
 };
 
 &nand {
@@ -105,7 +105,7 @@
 
 			port@5 {
 				reg = <5>;
-				label = "cpu";
+				phy-mode = "rgmii-id";
 				ethernet = <&eth0port>;
 				fixed-link {
 					speed = <1000>;
@@ -126,7 +126,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-rs212.dts b/arch/arm/boot/dts/marvell/kirkwood-rs212.dts
index c51cea883215..4ad412115a24 100644
--- a/arch/arm/boot/dts/kirkwood-rs212.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-rs212.dts
@@ -43,7 +43,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie1 {
diff --git a/arch/arm/boot/dts/kirkwood-rs409.dts b/arch/arm/boot/dts/marvell/kirkwood-rs409.dts
index 43673b03cb35..43673b03cb35 100644
--- a/arch/arm/boot/dts/kirkwood-rs409.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-rs409.dts
diff --git a/arch/arm/boot/dts/kirkwood-rs411.dts b/arch/arm/boot/dts/marvell/kirkwood-rs411.dts
index 41fa63cec839..41fa63cec839 100644
--- a/arch/arm/boot/dts/kirkwood-rs411.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-rs411.dts
diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi b/arch/arm/boot/dts/marvell/kirkwood-sheevaplug-common.dtsi
index 0a698d3b7393..0a698d3b7393 100644
--- a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-sheevaplug-common.dtsi
diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts b/arch/arm/boot/dts/marvell/kirkwood-sheevaplug-esata.dts
index ae8f493c9a0f..eb185273376e 100644
--- a/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-sheevaplug-esata.dts
@@ -33,7 +33,7 @@
 		pinctrl-0 = <&pmx_led_blue>;
 		pinctrl-names = "default";
 
-		health {
+		led-health {
 			label = "sheevaplug:blue:health";
 			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug.dts b/arch/arm/boot/dts/marvell/kirkwood-sheevaplug.dts
index c73cc904e5c4..ce73fcf2255f 100644
--- a/arch/arm/boot/dts/kirkwood-sheevaplug.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-sheevaplug.dts
@@ -28,13 +28,13 @@
 		pinctrl-0 = <&pmx_led_blue &pmx_led_red>;
 		pinctrl-names = "default";
 
-		health {
+		led-health {
 			label = "sheevaplug:blue:health";
 			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
 		};
 
-		misc {
+		led-misc {
 			label = "sheevaplug:red:misc";
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/kirkwood-synology.dtsi b/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi
index 217bd374e52b..6b7c5218b1fb 100644
--- a/arch/arm/boot/dts/kirkwood-synology.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi
@@ -198,7 +198,7 @@
 		spi@10600 {
 			status = "okay";
 
-			m25p80@0 {
+			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				compatible = "st,m25p80", "jedec,spi-nor";
@@ -286,14 +286,15 @@
 		gpios = <&gpio1 0 GPIO_ACTIVE_HIGH
 			 &gpio1 1 GPIO_ACTIVE_HIGH
 			 &gpio1 2 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2200 1
-				       2500 2
-				       3000 4
-				       3300 3
-				       3700 5
-				       3800 6
-				       4200 7 >;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<2200 1>,
+				<2500 2>,
+				<3000 4>,
+				<3300 3>,
+				<3700 5>,
+				<3800 6>,
+				<4200 7>;
 	};
 
 	gpio-fan-150-15-18 {
@@ -306,14 +307,15 @@
 			 &gpio0 16 GPIO_ACTIVE_HIGH
 			 &gpio0 17 GPIO_ACTIVE_HIGH>;
 		alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2200 1
-				       2500 2
-				       3000 4
-				       3300 3
-				       3700 5
-				       3800 6
-				       4200 7 >;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<2200 1>,
+				<2500 2>,
+				<3000 4>,
+				<3300 3>,
+				<3700 5>,
+				<3800 6>,
+				<4200 7>;
 	};
 
 	gpio-fan-100-32-35 {
@@ -326,14 +328,15 @@
 			 &gpio1 1 GPIO_ACTIVE_HIGH
 			 &gpio1 2 GPIO_ACTIVE_HIGH>;
 		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2500 1
-				       3100 2
-				       3800 3
-				       4600 4
-				       4800 5
-				       4900 6
-				       5000 7 >;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<2500 1>,
+				<3100 2>,
+				<3800 3>,
+				<4600 4>,
+				<4800 5>,
+				<4900 6>,
+				<5000 7>;
 	};
 
 	gpio-fan-100-15-18 {
@@ -346,14 +349,15 @@
 			 &gpio0 16 GPIO_ACTIVE_HIGH
 			 &gpio0 17 GPIO_ACTIVE_HIGH>;
 		alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2500 1
-				       3100 2
-				       3800 3
-				       4600 4
-				       4800 5
-				       4900 6
-				       5000 7 >;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<2500 1>,
+				<3100 2>,
+				<3800 3>,
+				<4600 4>,
+				<4800 5>,
+				<4900 6>,
+				<5000 7>;
 	};
 
 	gpio-fan-100-15-35-1 {
@@ -366,14 +370,15 @@
 			 &gpio0 16 GPIO_ACTIVE_HIGH
 			 &gpio0 17 GPIO_ACTIVE_HIGH>;
 		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2500 1
-				       3100 2
-				       3800 3
-				       4600 4
-				       4800 5
-				       4900 6
-				       5000 7 >;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<2500 1>,
+				<3100 2>,
+				<3800 3>,
+				<4600 4>,
+				<4800 5>,
+				<4900 6>,
+				<5000 7>;
 	};
 
 	gpio-fan-100-15-35-3 {
@@ -388,14 +393,15 @@
 		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH
 			       &gpio1 12 GPIO_ACTIVE_HIGH
 			       &gpio1 13 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2500 1
-				       3100 2
-				       3800 3
-				       4600 4
-				       4800 5
-				       4900 6
-				       5000 7 >;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<2500 1>,
+				<3100 2>,
+				<3800 3>,
+				<4600 4>,
+				<4800 5>,
+				<4900 6>,
+				<5000 7>;
 	};
 
 	gpio-leds-alarm-12 {
@@ -404,7 +410,7 @@
 		pinctrl-0 = <&pmx_alarmled_12>;
 		pinctrl-names = "default";
 
-		hdd1-green {
+		led-hdd1-green {
 			label = "synology:alarm";
 			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
 		};
@@ -418,42 +424,42 @@
 			     &pmx_hddled_26 &pmx_hddled_27>;
 		pinctrl-names = "default";
 
-		hdd1-green {
+		led-hdd1-green {
 			label = "synology:green:hdd1";
 			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd1-amber {
+		led-hdd1-amber {
 			label = "synology:amber:hdd1";
 			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd2-green {
+		led-hdd2-green {
 			label = "synology:green:hdd2";
 			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd2-amber {
+		led-hdd2-amber {
 			label = "synology:amber:hdd2";
 			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd3-green {
+		led-hdd3-green {
 			label = "synology:green:hdd3";
 			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd3-amber {
+		led-hdd3-amber {
 			label = "synology:amber:hdd3";
 			gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd4-green {
+		led-hdd4-green {
 			label = "synology:green:hdd4";
 			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd4-amber {
+		led-hdd4-amber {
 			label = "synology:amber:hdd4";
 			gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
 		};
@@ -465,12 +471,12 @@
 		pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23>;
 		pinctrl-names = "default";
 
-		hdd1-green {
+		led-hdd1-green {
 			label = "synology:green:hdd1";
 			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd1-amber {
+		led-hdd1-amber {
 			label = "synology:amber:hdd1";
 			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
 		};
@@ -482,22 +488,22 @@
 		pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23 &pmx_hddled_20 &pmx_hddled_22>;
 		pinctrl-names = "default";
 
-		hdd1-green {
+		led-hdd1-green {
 			label = "synology:green:hdd1";
 			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd1-amber {
+		led-hdd1-amber {
 			label = "synology:amber:hdd1";
 			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd2-green {
+		led-hdd2-green {
 			label = "synology:green:hdd2";
 			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd2-amber {
+		led-hdd2-amber {
 			label = "synology:amber:hdd2";
 			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
 		};
@@ -512,52 +518,52 @@
 			     &pmx_hddled_45>;
 		pinctrl-names = "default";
 
-		hdd1-green {
+		led-hdd1-green {
 			label = "synology:green:hdd1";
 			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd1-amber {
+		led-hdd1-amber {
 			label = "synology:amber:hdd1";
 			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd2-green {
+		led-hdd2-green {
 			label = "synology:green:hdd2";
 			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd2-amber {
+		led-hdd2-amber {
 			label = "synology:amber:hdd2";
 			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd3-green {
+		led-hdd3-green {
 			label = "synology:green:hdd3";
 			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd3-amber {
+		led-hdd3-amber {
 			label = "synology:amber:hdd3";
 			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd4-green {
+		led-hdd4-green {
 			label = "synology:green:hdd4";
 			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd4-amber {
+		led-hdd4-amber {
 			label = "synology:amber:hdd4";
 			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd5-green {
+		led-hdd5-green {
 			label = "synology:green:hdd5";
 			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd5-amber {
+		led-hdd5-amber {
 			label = "synology:amber:hdd5";
 			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
 		};
@@ -569,22 +575,22 @@
 		pinctrl-0 = <&pmx_hddled_38 &pmx_hddled_39 &pmx_hddled_36 &pmx_hddled_37>;
 		pinctrl-names = "default";
 
-		hdd1-green {
+		led-hdd1-green {
 			label = "synology:green:hdd1";
 			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd1-amber {
+		led-hdd1-amber {
 			label = "synology:amber:hdd1";
 			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd2-green {
+		led-hdd2-green {
 			label = "synology:green:hdd2";
 			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 		};
 
-		hdd2-amber {
+		led-hdd2-amber {
 			label = "synology:amber:hdd2";
 			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
 		};
@@ -847,7 +853,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-t5325.dts b/arch/arm/boot/dts/marvell/kirkwood-t5325.dts
index fe63b3a03a72..a6e77a487d00 100644
--- a/arch/arm/boot/dts/kirkwood-t5325.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-t5325.dts
@@ -156,12 +156,10 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_button_power>;
 		pinctrl-names = "default";
 
-		power {
+		button-power {
 			label = "Power Button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
@@ -219,7 +217,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/marvell/kirkwood-topkick.dts
index a5b51e29f63e..a5b51e29f63e 100644
--- a/arch/arm/boot/dts/kirkwood-topkick.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-topkick.dts
diff --git a/arch/arm/boot/dts/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/marvell/kirkwood-ts219-6281.dts
index 30892c19aceb..a2e0ad4b84d8 100644
--- a/arch/arm/boot/dts/kirkwood-ts219-6281.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ts219-6281.dts
@@ -35,17 +35,15 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
 		pinctrl-names = "default";
 
-		copy {
+		button-copy {
 			label = "USB Copy";
 			linux,code = <KEY_COPY>;
 			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
 		};
-		reset {
+		button-reset {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/marvell/kirkwood-ts219-6282.dts
index aba1205981f1..35be6bce1dba 100644
--- a/arch/arm/boot/dts/kirkwood-ts219-6282.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ts219-6282.dts
@@ -35,17 +35,15 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
 		pinctrl-names = "default";
 
-		copy {
+		button-copy {
 			label = "USB Copy";
 			linux,code = <KEY_COPY>;
 			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
 		};
-		reset {
+		button-reset {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/marvell/kirkwood-ts219.dtsi
index 994cabcf4b51..1939462a5f48 100644
--- a/arch/arm/boot/dts/kirkwood-ts219.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-ts219.dtsi
@@ -86,7 +86,7 @@
 	status = "okay";
 
 	ethphy0: ethernet-phy@X {
-                /* overwrite reg property in board file */
+		/* overwrite reg property in board file */
 	};
 };
 
@@ -98,7 +98,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-ts419-6281.dts b/arch/arm/boot/dts/marvell/kirkwood-ts419-6281.dts
index 4a42ebcca4f0..4a42ebcca4f0 100644
--- a/arch/arm/boot/dts/kirkwood-ts419-6281.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ts419-6281.dts
diff --git a/arch/arm/boot/dts/kirkwood-ts419-6282.dts b/arch/arm/boot/dts/marvell/kirkwood-ts419-6282.dts
index be772e194c2b..be772e194c2b 100644
--- a/arch/arm/boot/dts/kirkwood-ts419-6282.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-ts419-6282.dts
diff --git a/arch/arm/boot/dts/kirkwood-ts419.dtsi b/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi
index 717236853e45..f136059607b7 100644
--- a/arch/arm/boot/dts/kirkwood-ts419.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi
@@ -36,17 +36,15 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
 		pinctrl-names = "default";
 
-		copy {
+		button-copy {
 			label = "USB Copy";
 			linux,code = <KEY_COPY>;
 			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
 		};
-		reset {
+		button-reset {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/marvell/kirkwood.dtsi
index fca31a5d5ac7..8a1338e672b3 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/marvell/kirkwood.dtsi
@@ -24,9 +24,9 @@
 	};
 
 	aliases {
-	       gpio0 = &gpio0;
-	       gpio1 = &gpio1;
-	       i2c0 = &i2c0;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		i2c0 = &i2c0;
 	};
 
 	mbus@f1000000 {
@@ -263,7 +263,7 @@
 			status = "okay";
 		};
 
-		usb0: ehci@50000 {
+		usb0: usb@50000 {
 			compatible = "marvell,orion-ehci";
 			reg = <0x50000 0x1000>;
 			interrupts = <19>;
@@ -279,15 +279,15 @@
 			clocks = <&gate_clk 8>;
 
 			xor00 {
-			      interrupts = <5>;
-			      dmacap,memcpy;
-			      dmacap,xor;
+				interrupts = <5>;
+				dmacap,memcpy;
+				dmacap,xor;
 			};
 			xor01 {
-			      interrupts = <6>;
-			      dmacap,memcpy;
-			      dmacap,xor;
-			      dmacap,memset;
+				interrupts = <6>;
+				dmacap,memcpy;
+				dmacap,xor;
+				dmacap,memset;
 			};
 		};
 
@@ -299,15 +299,15 @@
 			clocks = <&gate_clk 16>;
 
 			xor00 {
-			      interrupts = <7>;
-			      dmacap,memcpy;
-			      dmacap,xor;
+				interrupts = <7>;
+				dmacap,memcpy;
+				dmacap,xor;
 			};
 			xor01 {
-			      interrupts = <8>;
-			      dmacap,memcpy;
-			      dmacap,xor;
-			      dmacap,memset;
+				interrupts = <8>;
+				dmacap,memcpy;
+				dmacap,xor;
+				dmacap,memset;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/mmp2-brownstone.dts b/arch/arm/boot/dts/marvell/mmp2-brownstone.dts
index 04f1ae1382e7..bc64348b8218 100644
--- a/arch/arm/boot/dts/mmp2-brownstone.dts
+++ b/arch/arm/boot/dts/marvell/mmp2-brownstone.dts
@@ -28,7 +28,7 @@
 &twsi1 {
 	status = "okay";
 	pmic: max8925@3c {
-		compatible = "maxium,max8925";
+		compatible = "maxim,max8925";
 		reg = <0x3c>;
 		interrupts = <1>;
 		interrupt-parent = <&intcmux4>;
diff --git a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts b/arch/arm/boot/dts/marvell/mmp2-olpc-xo-1-75.dts
index 55ea87870af3..86c425b72fa7 100644
--- a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts
+++ b/arch/arm/boot/dts/marvell/mmp2-olpc-xo-1-75.dts
@@ -113,8 +113,8 @@
 			  "Headphones", "HPOR",
 			  "MIC2", "Mic Jack";
 		widgets = "Headphone", "Headphones", "Microphone", "Mic Jack";
-		hp-det-gpio = <&gpio 97 GPIO_ACTIVE_HIGH>;
-		mic-det-gpio = <&gpio 96 GPIO_ACTIVE_HIGH>;
+		hp-det-gpios = <&gpio 97 GPIO_ACTIVE_HIGH>;
+		mic-det-gpios = <&gpio 96 GPIO_ACTIVE_HIGH>;
 	};
 
 	soc {
diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/marvell/mmp2.dtsi
index 46984d4c5224..987d792f67ea 100644
--- a/arch/arm/boot/dts/mmp2.dtsi
+++ b/arch/arm/boot/dts/marvell/mmp2.dtsi
@@ -275,7 +275,9 @@
 				compatible = "marvell,pdma-1.0";
 				reg = <0xd4000000 0x10000>;
 				interrupts = <48>;
+				/* For backwards compatibility: */
 				#dma-channels = <16>;
+				dma-channels = <16>;
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/mmp3-dell-ariel.dts b/arch/arm/boot/dts/marvell/mmp3-dell-ariel.dts
index fe6df364a9eb..fe6df364a9eb 100644
--- a/arch/arm/boot/dts/mmp3-dell-ariel.dts
+++ b/arch/arm/boot/dts/marvell/mmp3-dell-ariel.dts
diff --git a/arch/arm/boot/dts/mmp3.dtsi b/arch/arm/boot/dts/marvell/mmp3.dtsi
index a4fb9203ec1f..a4fb9203ec1f 100644
--- a/arch/arm/boot/dts/mmp3.dtsi
+++ b/arch/arm/boot/dts/marvell/mmp3.dtsi
diff --git a/arch/arm/boot/dts/mvebu-linkstation-fan.dtsi b/arch/arm/boot/dts/marvell/mvebu-linkstation-fan.dtsi
index e172029a0c4d..a260c42dbda3 100644
--- a/arch/arm/boot/dts/mvebu-linkstation-fan.dtsi
+++ b/arch/arm/boot/dts/marvell/mvebu-linkstation-fan.dtsi
@@ -50,10 +50,10 @@
 		pinctrl-names = "default";
 
 		gpio-fan,speed-map =
-			<0		3
-			1500	2
-			3250	1
-			5000	0>;
+			<   0 3>,
+			<1500 2>,
+			<3250 1>,
+			<5000 0>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/mvebu-linkstation-gpio-simple.dtsi b/arch/arm/boot/dts/marvell/mvebu-linkstation-gpio-simple.dtsi
index c2d87ba6190a..055ac754c5fd 100644
--- a/arch/arm/boot/dts/mvebu-linkstation-gpio-simple.dtsi
+++ b/arch/arm/boot/dts/marvell/mvebu-linkstation-gpio-simple.dtsi
@@ -48,8 +48,6 @@
 / {
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&pmx_power_switch>;
 		pinctrl-names = "default";
 
diff --git a/arch/arm/boot/dts/orion5x-kuroboxpro.dts b/arch/arm/boot/dts/marvell/orion5x-kuroboxpro.dts
index e28b568e741a..e28b568e741a 100644
--- a/arch/arm/boot/dts/orion5x-kuroboxpro.dts
+++ b/arch/arm/boot/dts/marvell/orion5x-kuroboxpro.dts
diff --git a/arch/arm/boot/dts/orion5x-lacie-d2-network.dts b/arch/arm/boot/dts/marvell/orion5x-lacie-d2-network.dts
index 422958d13d42..12a4aac2633e 100644
--- a/arch/arm/boot/dts/orion5x-lacie-d2-network.dts
+++ b/arch/arm/boot/dts/marvell/orion5x-lacie-d2-network.dts
@@ -1,10 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 /dts-v1/;
@@ -38,22 +35,21 @@
 		compatible = "gpio-keys";
 		pinctrl-0 = <&pmx_buttons>;
 		pinctrl-names = "default";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		front_button {
+
+		button-front {
 			label = "Front Push Button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
 		};
 
-		power_rocker_sw_on {
+		switch-power-rocker-sw-on {
 			label = "Power rocker switch (on|auto)";
 			linux,input-type = <5>; /* EV_SW */
 			linux,code = <1>; /* D2NET_SWITCH_POWER_ON */
 			gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
 		};
 
-		power_rocker_sw_off {
+		switch-power-rocker-sw-off {
 			label = "Power rocker switch (auto|off)";
 			linux,input-type = <5>; /* EV_SW */
 			linux,code = <2>; /* D2NET_SWITCH_POWER_OFF */
diff --git a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts b/arch/arm/boot/dts/marvell/orion5x-lacie-ethernet-disk-mini-v2.dts
index 0043e0040153..f81acb9b7223 100644
--- a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts
+++ b/arch/arm/boot/dts/marvell/orion5x-lacie-ethernet-disk-mini-v2.dts
@@ -1,10 +1,5 @@
-/*
- * Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
 
 /*
  * TODO: add Orion USB device port init when kernel.org support is added.
@@ -44,9 +39,8 @@
 		compatible = "gpio-keys";
 		pinctrl-0 = <&pmx_power_button>;
 		pinctrl-names = "default";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		button@1 {
+
+		button-1 {
 			label = "Power-on Switch";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
@@ -58,7 +52,7 @@
 		pinctrl-0 = <&pmx_power_led>;
 		pinctrl-names = "default";
 
-		led@1 {
+		led-1 {
 			label = "power:blue";
 			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/orion5x-linkstation-lschl.dts b/arch/arm/boot/dts/marvell/orion5x-linkstation-lschl.dts
index ee751995c8d0..79fee048c900 100644
--- a/arch/arm/boot/dts/orion5x-linkstation-lschl.dts
+++ b/arch/arm/boot/dts/marvell/orion5x-linkstation-lschl.dts
@@ -61,7 +61,7 @@
 	};
 
 	gpio_keys {
-		func {
+		func-button {
 			label = "Function Button";
 			linux,code = <KEY_OPTION>;
 			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
@@ -90,7 +90,7 @@
 			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
 		};
 
-		func {
+		func-led {
 			label = "lschl:func:blue:top";
 			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts b/arch/arm/boot/dts/marvell/orion5x-linkstation-lsgl.dts
index 9f6fedd39170..9f6fedd39170 100644
--- a/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts
+++ b/arch/arm/boot/dts/marvell/orion5x-linkstation-lsgl.dts
diff --git a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts b/arch/arm/boot/dts/marvell/orion5x-linkstation-lswtgl.dts
index 7f77ce8cc1fc..7f77ce8cc1fc 100644
--- a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts
+++ b/arch/arm/boot/dts/marvell/orion5x-linkstation-lswtgl.dts
diff --git a/arch/arm/boot/dts/orion5x-linkstation.dtsi b/arch/arm/boot/dts/marvell/orion5x-linkstation.dtsi
index b6c9b85951ea..b6c9b85951ea 100644
--- a/arch/arm/boot/dts/orion5x-linkstation.dtsi
+++ b/arch/arm/boot/dts/marvell/orion5x-linkstation.dtsi
diff --git a/arch/arm/boot/dts/orion5x-lswsgl.dts b/arch/arm/boot/dts/marvell/orion5x-lswsgl.dts
index 2fbc17d6dfa4..e0da406c430f 100644
--- a/arch/arm/boot/dts/orion5x-lswsgl.dts
+++ b/arch/arm/boot/dts/marvell/orion5x-lswsgl.dts
@@ -74,22 +74,21 @@
 		compatible = "gpio-keys";
 		pinctrl-0 = <&pmx_buttons>;
 		pinctrl-names = "default";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		func {
+
+		key-func {
 			label = "Function Button";
 			linux,code = <KEY_OPTION>;
 			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
 		};
 
-		power {
+		key-power {
 			label = "Power-on Switch";
 			linux,input-type = <5>; /* EV_SW */
 			linux,code = <KEY_RESERVED>; /* LSMINI_SW_POWER */
 			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
 		};
 
-		autopower {
+		key-autopower {
 			label = "Power-auto Switch";
 			linux,input-type = <5>; /* EV_SW */
 			linux,code = <KEY_ESC>; /* LSMINI_SW_AUTOPOWER */
@@ -103,24 +102,24 @@
 			     &pmx_led_power>;
 		pinctrl-names = "default";
 
-		alarm {
+		led-alarm {
 			label = "lswsgl:alarm:red";
-			gpio = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
 		};
 
-		info {
+		led-info {
 			label = "lswsgl:info:amber";
-			gpio = <&gpio0 3 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
 		};
 
-		func {
+		led-func {
 			label = "lswsgl:func:blue:top";
-			gpio = <&gpio0 9 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
 		};
 
-		power {
+		led-power {
 			label = "lswsgl:power:blue:bottom";
-			gpio = <&gpio0 14 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 		};
 	};
diff --git a/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts b/arch/arm/boot/dts/marvell/orion5x-maxtor-shared-storage-2.dts
index 0ca6208a267d..cb1bd24b7ae3 100644
--- a/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts
+++ b/arch/arm/boot/dts/marvell/orion5x-maxtor-shared-storage-2.dts
@@ -1,10 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  * Copyright (C) Sylver Bruneau <sylver.bruneau@googlemail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 /dts-v1/;
@@ -38,15 +35,14 @@
 		compatible = "gpio-keys";
 		pinctrl-0 = <&pmx_buttons>;
 		pinctrl-names = "default";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		power {
+
+		key-power {
 			label = "Power";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
 		};
 
-		reset {
+		key-reset {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/orion5x-mv88f5181.dtsi b/arch/arm/boot/dts/marvell/orion5x-mv88f5181.dtsi
index f667012b26ca..819f9efb7058 100644
--- a/arch/arm/boot/dts/orion5x-mv88f5181.dtsi
+++ b/arch/arm/boot/dts/marvell/orion5x-mv88f5181.dtsi
@@ -1,10 +1,5 @@
-/*
- * Copyright (C) 2016 Jamie Lentin <jm@lentin.co.uk>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2016 Jamie Lentin <jm@lentin.co.uk>
 
 #include "orion5x.dtsi"
 
diff --git a/arch/arm/boot/dts/orion5x-mv88f5182.dtsi b/arch/arm/boot/dts/marvell/orion5x-mv88f5182.dtsi
index d1ed71c60209..86b87fb26dc9 100644
--- a/arch/arm/boot/dts/orion5x-mv88f5182.dtsi
+++ b/arch/arm/boot/dts/marvell/orion5x-mv88f5182.dtsi
@@ -1,10 +1,5 @@
-/*
- * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
 
 #include "orion5x.dtsi"
 
diff --git a/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts b/arch/arm/boot/dts/marvell/orion5x-netgear-wnr854t.dts
index ea081afa469d..d63ea15539aa 100644
--- a/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts
+++ b/arch/arm/boot/dts/marvell/orion5x-netgear-wnr854t.dts
@@ -1,10 +1,5 @@
-/*
- * Copyright (C) 2016 Jamie Lentin <jm@lentin.co.uk>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2016 Jamie Lentin <jm@lentin.co.uk>
 
 /dts-v1/;
 
@@ -40,7 +35,7 @@
 		pinctrl-0 = <&pmx_reset_button>;
 		pinctrl-names = "default";
 
-		reset {
+		key-reset {
 			label = "Reset Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
@@ -142,8 +137,12 @@
 
 			port@3 {
 				reg = <3>;
-				label = "cpu";
 				ethernet = <&ethport>;
+				phy-mode = "rgmii-id";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
 			};
 
 			port@5 {
@@ -213,6 +212,7 @@
 		/* Hardwired to DSA switch */
 		speed = <1000>;
 		duplex = <1>;
+		phy-mode = "rgmii";
 	};
 };
 
diff --git a/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts b/arch/arm/boot/dts/marvell/orion5x-rd88f5182-nas.dts
index 487324f7c54e..75ab913b21e5 100644
--- a/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts
+++ b/arch/arm/boot/dts/marvell/orion5x-rd88f5182-nas.dts
@@ -1,10 +1,5 @@
-/*
- * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
 
 /dts-v1/;
 
@@ -37,7 +32,7 @@
 		pinctrl-0 = <&pmx_debug_led>;
 		pinctrl-names = "default";
 
-		led@0 {
+		led-0 {
 			label = "rd88f5182:cpu";
 			linux,default-trigger = "heartbeat";
 			gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/marvell/orion5x.dtsi
index 61e631b3fd8b..939259c57e05 100644
--- a/arch/arm/boot/dts/orion5x.dtsi
+++ b/arch/arm/boot/dts/marvell/orion5x.dtsi
@@ -1,10 +1,5 @@
-/*
- * Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
 
 #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
 
@@ -151,7 +146,7 @@
 				status = "okay";
 			};
 
-			ehci0: ehci@50000 {
+			ehci0: usb@50000 {
 				compatible = "marvell,orion-ehci";
 				reg = <0x50000 0x1000>;
 				interrupts = <17>;
@@ -223,7 +218,7 @@
 				status = "okay";
 			};
 
-			ehci1: ehci@a0000 {
+			ehci1: usb@a0000 {
 				compatible = "marvell,orion-ehci";
 				reg = <0xa0000 0x1000>;
 				interrupts = <12>;
diff --git a/arch/arm/boot/dts/pxa168-aspenite.dts b/arch/arm/boot/dts/marvell/pxa168-aspenite.dts
index 8bade6bf395b..8bade6bf395b 100644
--- a/arch/arm/boot/dts/pxa168-aspenite.dts
+++ b/arch/arm/boot/dts/marvell/pxa168-aspenite.dts
diff --git a/arch/arm/boot/dts/pxa168.dtsi b/arch/arm/boot/dts/marvell/pxa168.dtsi
index 4fe7735c7c58..22ed10cb5619 100644
--- a/arch/arm/boot/dts/pxa168.dtsi
+++ b/arch/arm/boot/dts/marvell/pxa168.dtsi
@@ -53,6 +53,8 @@
 				compatible = "mrvl,mmp-timer";
 				reg = <0xd4014000 0x100>;
 				interrupts = <13>;
+				clocks = <&soc_clocks PXA168_CLK_TIMER>;
+				resets = <&soc_clocks PXA168_CLK_TIMER>;
 			};
 
 			uart1: serial@d4017000 {
@@ -151,7 +153,7 @@
 			};
 		};
 
-		soc_clocks: clocks{
+		soc_clocks: clocks {
 			compatible = "marvell,pxa168-clock";
 			reg = <0xd4050000 0x1000>,
 			      <0xd4282800 0x400>,
diff --git a/arch/arm/boot/dts/pxa910-dkb.dts b/arch/arm/boot/dts/marvell/pxa910-dkb.dts
index ce76158867c7..ce76158867c7 100644
--- a/arch/arm/boot/dts/pxa910-dkb.dts
+++ b/arch/arm/boot/dts/marvell/pxa910-dkb.dts
diff --git a/arch/arm/boot/dts/pxa910.dtsi b/arch/arm/boot/dts/marvell/pxa910.dtsi
index 352a39357810..bd64ac1ec66f 100644
--- a/arch/arm/boot/dts/pxa910.dtsi
+++ b/arch/arm/boot/dts/marvell/pxa910.dtsi
@@ -163,7 +163,7 @@
 			};
 		};
 
-		soc_clocks: clocks{
+		soc_clocks: clocks {
 			compatible = "marvell,pxa910-clock";
 			reg = <0xd4050000 0x1000>,
 			      <0xd4282800 0x400>,
diff --git a/arch/arm/boot/dts/mediatek/Makefile b/arch/arm/boot/dts/mediatek/Makefile
new file mode 100644
index 000000000000..37c4cded0eae
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/Makefile
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_MEDIATEK) += \
+	mt2701-evb.dtb \
+	mt6572-jty-d101.dtb \
+	mt6572-lenovo-a369i.dtb \
+	mt6580-evbp1.dtb \
+	mt6582-alcatel-yarisxl.dtb \
+	mt6582-prestigio-pmt5008-3g.dtb \
+	mt6589-aquaris5.dtb \
+	mt6589-fairphone-fp1.dtb \
+	mt6592-evb.dtb \
+	mt7623a-rfb-emmc.dtb \
+	mt7623a-rfb-nand.dtb \
+	mt7623n-rfb-emmc.dtb \
+	mt7623n-bananapi-bpi-r2.dtb \
+	mt7629-rfb.dtb \
+	mt8127-moose.dtb \
+	mt8135-evbp1.dtb
diff --git a/arch/arm/boot/dts/mt2701-evb.dts b/arch/arm/boot/dts/mediatek/mt2701-evb.dts
index d1535f385f36..e97dc37f716c 100644
--- a/arch/arm/boot/dts/mt2701-evb.dts
+++ b/arch/arm/boot/dts/mediatek/mt2701-evb.dts
@@ -50,6 +50,7 @@
 
 	bt_sco_codec:bt_sco_codec {
 		compatible = "linux,bt-sco";
+		#sound-dai-cells = <0>;
 	};
 
 	backlight_lcd: backlight_lcd {
@@ -231,7 +232,7 @@
 				 <MT2701_PIN_238_EXT_SDIO1__FUNC_EXT_SDIO1>,
 				 <MT2701_PIN_237_EXT_SDIO2__FUNC_EXT_SDIO2>,
 				 <MT2701_PIN_236_EXT_SDIO3__FUNC_EXT_SDIO3>;
-			drive-strength = <MTK_DRIVE_4mA>;
+			drive-strength = <4>;
 			bias-pull-up;
 		};
 	};
@@ -244,7 +245,7 @@
 &usb2 {
 	status = "okay";
 	usb-role-switch;
-	connector{
+	connector {
 		compatible = "gpio-usb-b-connector", "usb-b-connector";
 		type = "micro";
 		id-gpios = <&pio 44 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/mt2701-pinfunc.h b/arch/arm/boot/dts/mediatek/mt2701-pinfunc.h
index 136a25a0ae28..136a25a0ae28 100644
--- a/arch/arm/boot/dts/mt2701-pinfunc.h
+++ b/arch/arm/boot/dts/mediatek/mt2701-pinfunc.h
diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mediatek/mt2701.dtsi
index 4776f85d6d5b..128b87229f3d 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mediatek/mt2701.dtsi
@@ -178,7 +178,6 @@
 		compatible = "mediatek,mt2701-pinctrl";
 		reg = <0 0x1000b000 0 0x1000>;
 		mediatek,pctl-regmap = <&syscfg_pctl_a>;
-		pins-are-numbered;
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
@@ -360,7 +359,7 @@
 		mediatek,apmixedsys = <&apmixedsys>;
 	};
 
-	nandc: nfi@1100d000 {
+	nandc: nand-controller@1100d000 {
 		compatible = "mediatek,mt2701-nfc";
 		reg = <0 0x1100d000 0 0x1000>;
 		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>;
@@ -427,9 +426,9 @@
 
 		afe: audio-controller {
 			compatible = "mediatek,mt2701-audio";
-			interrupts =  <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
 				      <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
-			interrupt-names	= "afe", "asys";
+			interrupt-names = "afe", "asys";
 			power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
 
 			clocks = <&infracfg CLK_INFRA_AUDIO>,
@@ -559,12 +558,11 @@
 		compatible = "mediatek,mt2701-jpgdec";
 		reg = <0 0x15004000 0 0x1000>;
 		interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
-		clocks =  <&imgsys CLK_IMG_JPGDEC_SMI>,
+		clocks = <&imgsys CLK_IMG_JPGDEC_SMI>,
 			  <&imgsys CLK_IMG_JPGDEC>;
 		clock-names = "jpgdec-smi",
 			      "jpgdec";
 		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-		mediatek,larb = <&larb2>;
 		iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
 			 <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
 	};
@@ -574,10 +572,9 @@
 			     "mediatek,mtk-jpgenc";
 		reg = <0 0x1500a000 0 0x1000>;
 		interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_LOW>;
-		clocks =  <&imgsys CLK_IMG_VENC>;
+		clocks = <&imgsys CLK_IMG_VENC>;
 		clock-names = "jpgenc";
 		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-		mediatek,larb = <&larb2>;
 		iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>,
 			 <&iommu MT2701_M4U_PORT_JPGENC_BSDMA>;
 	};
@@ -600,7 +597,7 @@
 	};
 
 	hifsys: syscon@1a000000 {
-		compatible = "mediatek,mt2701-hifsys", "syscon";
+		compatible = "mediatek,mt2701-hifsys";
 		reg = <0 0x1a000000 0 0x1000>;
 		#clock-cells = <1>;
 		#reset-cells = <1>;
diff --git a/arch/arm/boot/dts/mt6323.dtsi b/arch/arm/boot/dts/mediatek/mt6323.dtsi
index 7fda40ab5fe8..c230c865116d 100644
--- a/arch/arm/boot/dts/mt6323.dtsi
+++ b/arch/arm/boot/dts/mediatek/mt6323.dtsi
@@ -21,10 +21,10 @@
 			status = "disabled";
 		};
 
-		mt6323regulator: mt6323regulator{
+		mt6323regulator: mt6323regulator {
 			compatible = "mediatek,mt6323-regulator";
 
-			mt6323_vproc_reg: buck_vproc{
+			mt6323_vproc_reg: buck_vproc {
 				regulator-name = "vproc";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -33,7 +33,7 @@
 				regulator-boot-on;
 			};
 
-			mt6323_vsys_reg: buck_vsys{
+			mt6323_vsys_reg: buck_vsys {
 				regulator-name = "vsys";
 				regulator-min-microvolt = <1400000>;
 				regulator-max-microvolt = <2987500>;
@@ -42,13 +42,13 @@
 				regulator-boot-on;
 			};
 
-			mt6323_vpa_reg: buck_vpa{
+			mt6323_vpa_reg: buck_vpa {
 				regulator-name = "vpa";
 				regulator-min-microvolt = < 500000>;
 				regulator-max-microvolt = <3650000>;
 			};
 
-			mt6323_vtcxo_reg: ldo_vtcxo{
+			mt6323_vtcxo_reg: ldo_vtcxo {
 				regulator-name = "vtcxo";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -57,28 +57,28 @@
 				regulator-boot-on;
 			};
 
-			mt6323_vcn28_reg: ldo_vcn28{
+			mt6323_vcn28_reg: ldo_vcn28 {
 				regulator-name = "vcn28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
 				regulator-enable-ramp-delay = <185>;
 			};
 
-			mt6323_vcn33_bt_reg: ldo_vcn33_bt{
+			mt6323_vcn33_bt_reg: ldo_vcn33_bt {
 				regulator-name = "vcn33_bt";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3600000>;
 				regulator-enable-ramp-delay = <185>;
 			};
 
-			mt6323_vcn33_wifi_reg: ldo_vcn33_wifi{
+			mt6323_vcn33_wifi_reg: ldo_vcn33_wifi {
 				regulator-name = "vcn33_wifi";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3600000>;
 				regulator-enable-ramp-delay = <185>;
 			};
 
-			mt6323_va_reg: ldo_va{
+			mt6323_va_reg: ldo_va {
 				regulator-name = "va";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -87,14 +87,14 @@
 				regulator-boot-on;
 			};
 
-			mt6323_vcama_reg: ldo_vcama{
+			mt6323_vcama_reg: ldo_vcama {
 				regulator-name = "vcama";
 				regulator-min-microvolt = <1500000>;
 				regulator-max-microvolt = <2800000>;
 				regulator-enable-ramp-delay = <216>;
 			};
 
-			mt6323_vio28_reg: ldo_vio28{
+			mt6323_vio28_reg: ldo_vio28 {
 				regulator-name = "vio28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -103,7 +103,7 @@
 				regulator-boot-on;
 			};
 
-			mt6323_vusb_reg: ldo_vusb{
+			mt6323_vusb_reg: ldo_vusb {
 				regulator-name = "vusb";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
@@ -111,7 +111,7 @@
 				regulator-boot-on;
 			};
 
-			mt6323_vmc_reg: ldo_vmc{
+			mt6323_vmc_reg: ldo_vmc {
 				regulator-name = "vmc";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
@@ -119,7 +119,7 @@
 				regulator-boot-on;
 			};
 
-			mt6323_vmch_reg: ldo_vmch{
+			mt6323_vmch_reg: ldo_vmch {
 				regulator-name = "vmch";
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3300000>;
@@ -127,7 +127,7 @@
 				regulator-boot-on;
 			};
 
-			mt6323_vemc3v3_reg: ldo_vemc3v3{
+			mt6323_vemc3v3_reg: ldo_vemc3v3 {
 				regulator-name = "vemc3v3";
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3300000>;
@@ -135,49 +135,49 @@
 				regulator-boot-on;
 			};
 
-			mt6323_vgp1_reg: ldo_vgp1{
+			mt6323_vgp1_reg: ldo_vgp1 {
 				regulator-name = "vgp1";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-enable-ramp-delay = <216>;
 			};
 
-			mt6323_vgp2_reg: ldo_vgp2{
+			mt6323_vgp2_reg: ldo_vgp2 {
 				regulator-name = "vgp2";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3000000>;
 				regulator-enable-ramp-delay = <216>;
 			};
 
-			mt6323_vgp3_reg: ldo_vgp3{
+			mt6323_vgp3_reg: ldo_vgp3 {
 				regulator-name = "vgp3";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-enable-ramp-delay = <216>;
 			};
 
-			mt6323_vcn18_reg: ldo_vcn18{
+			mt6323_vcn18_reg: ldo_vcn18 {
 				regulator-name = "vcn18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-enable-ramp-delay = <216>;
 			};
 
-			mt6323_vsim1_reg: ldo_vsim1{
+			mt6323_vsim1_reg: ldo_vsim1 {
 				regulator-name = "vsim1";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3000000>;
 				regulator-enable-ramp-delay = <216>;
 			};
 
-			mt6323_vsim2_reg: ldo_vsim2{
+			mt6323_vsim2_reg: ldo_vsim2 {
 				regulator-name = "vsim2";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3000000>;
 				regulator-enable-ramp-delay = <216>;
 			};
 
-			mt6323_vrtc_reg: ldo_vrtc{
+			mt6323_vrtc_reg: ldo_vrtc {
 				regulator-name = "vrtc";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -185,28 +185,28 @@
 				regulator-boot-on;
 			};
 
-			mt6323_vcamaf_reg: ldo_vcamaf{
+			mt6323_vcamaf_reg: ldo_vcamaf {
 				regulator-name = "vcamaf";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-enable-ramp-delay = <216>;
 			};
 
-			mt6323_vibr_reg: ldo_vibr{
+			mt6323_vibr_reg: ldo_vibr {
 				regulator-name = "vibr";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-enable-ramp-delay = <36>;
 			};
 
-			mt6323_vrf18_reg: ldo_vrf18{
+			mt6323_vrf18_reg: ldo_vrf18 {
 				regulator-name = "vrf18";
 				regulator-min-microvolt = <1825000>;
 				regulator-max-microvolt = <1825000>;
 				regulator-enable-ramp-delay = <187>;
 			};
 
-			mt6323_vm_reg: ldo_vm{
+			mt6323_vm_reg: ldo_vm {
 				regulator-name = "vm";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1800000>;
@@ -215,7 +215,7 @@
 				regulator-boot-on;
 			};
 
-			mt6323_vio18_reg: ldo_vio18{
+			mt6323_vio18_reg: ldo_vio18 {
 				regulator-name = "vio18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -224,14 +224,14 @@
 				regulator-boot-on;
 			};
 
-			mt6323_vcamd_reg: ldo_vcamd{
+			mt6323_vcamd_reg: ldo_vcamd {
 				regulator-name = "vcamd";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-enable-ramp-delay = <216>;
 			};
 
-			mt6323_vcamio_reg: ldo_vcamio{
+			mt6323_vcamio_reg: ldo_vcamio {
 				regulator-name = "vcamio";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
diff --git a/arch/arm/boot/dts/mediatek/mt6572-jty-d101.dts b/arch/arm/boot/dts/mediatek/mt6572-jty-d101.dts
new file mode 100644
index 000000000000..18c3cab6b7a3
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt6572-jty-d101.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2025 Max Shevchenko <wctrl@proton.me>
+ */
+
+/dts-v1/;
+#include "mt6572.dtsi"
+
+/ {
+	model = "JTY D101";
+	compatible = "jty,d101", "mediatek,mt6572";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		stdout-path = "serial0:921600n8";
+
+		framebuffer: framebuffer@bf400000 {
+			compatible = "simple-framebuffer";
+			memory-region = <&framebuffer_reserved>;
+			width = <1024>;
+			height = <600>;
+			stride = <(1024 * 2)>;
+			format = "r5g6b5";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		connsys@80000000 {
+			reg = <0x80000000 0x100000>;
+			no-map;
+		};
+
+		modem@be000000 {
+			reg = <0xbe000000 0x1400000>;
+			no-map;
+		};
+
+		framebuffer_reserved: framebuffer@bf400000 {
+			reg = <0xbf400000 0xc00000>;
+			no-map;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mediatek/mt6572-lenovo-a369i.dts b/arch/arm/boot/dts/mediatek/mt6572-lenovo-a369i.dts
new file mode 100644
index 000000000000..c2f0c60ea777
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt6572-lenovo-a369i.dts
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2025 Max Shevchenko <wctrl@proton.me>
+ */
+
+/dts-v1/;
+#include "mt6572.dtsi"
+
+/ {
+	model = "Lenovo A369i";
+	compatible = "lenovo,a369i", "mediatek,mt6572";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		stdout-path = "serial0:921600n8";
+
+		framebuffer: framebuffer@9fa00000 {
+			compatible = "simple-framebuffer";
+			memory-region = <&framebuffer_reserved>;
+			width = <480>;
+			height = <800>;
+			stride = <(480 * 2)>;
+			format = "r5g6b5";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		connsys@80000000 {
+			reg = <0x80000000 0x100000>;
+			no-map;
+		};
+
+		framebuffer_reserved: framebuffer@9fa00000 {
+			reg = <0x9fa00000 0x600000>;
+			no-map;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mediatek/mt6572.dtsi b/arch/arm/boot/dts/mediatek/mt6572.dtsi
new file mode 100644
index 000000000000..ac70f266d698
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt6572.dtsi
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2025 Max Shevchenko <wctrl@proton.me>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&sysirq>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "mediatek,mt6589-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+		};
+	};
+
+	uart_clk: dummy26m {
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+		#clock-cells = <0>;
+	};
+
+	system_clk: dummy13m {
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+		#clock-cells = <0>;
+	};
+
+	rtc_clk: dummy32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32000>;
+		#clock-cells = <0>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		watchdog: watchdog@10007000 {
+			compatible = "mediatek,mt6572-wdt", "mediatek,mt6589-wdt";
+			reg = <0x10007000 0x100>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_LOW>;
+			timeout-sec = <15>;
+			#reset-cells = <1>;
+		};
+
+		timer: timer@10008000 {
+			compatible = "mediatek,mt6572-timer", "mediatek,mt6577-timer";
+			reg = <0x10008000 0x80>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&system_clk>, <&rtc_clk>;
+			clock-names = "system-clk", "rtc-clk";
+		};
+
+		sysirq: interrupt-controller@10200100 {
+			compatible = "mediatek,mt6572-sysirq", "mediatek,mt6577-sysirq";
+			reg = <0x10200100 0x1c>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+		};
+
+		gic: interrupt-controller@10211000 {
+			compatible = "arm,cortex-a7-gic";
+			reg = <0x10211000 0x1000>,
+			      <0x10212000 0x2000>,
+			      <0x10214000 0x2000>,
+			      <0x10216000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+		};
+
+		uart0: serial@11005000 {
+			compatible = "mediatek,mt6572-uart", "mediatek,mt6577-uart";
+			reg = <0x11005000 0x400>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			clock-names = "baud";
+			status = "disabled";
+		};
+
+		uart1: serial@11006000 {
+			compatible = "mediatek,mt6572-uart", "mediatek,mt6577-uart";
+			reg = <0x11006000 0x400>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			clock-names = "baud";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/mt6580-evbp1.dts b/arch/arm/boot/dts/mediatek/mt6580-evbp1.dts
index 755a0774a8ee..755a0774a8ee 100644
--- a/arch/arm/boot/dts/mt6580-evbp1.dts
+++ b/arch/arm/boot/dts/mediatek/mt6580-evbp1.dts
diff --git a/arch/arm/boot/dts/mt6580.dtsi b/arch/arm/boot/dts/mediatek/mt6580.dtsi
index 9e17698c0609..9e17698c0609 100644
--- a/arch/arm/boot/dts/mt6580.dtsi
+++ b/arch/arm/boot/dts/mediatek/mt6580.dtsi
diff --git a/arch/arm/boot/dts/mediatek/mt6582-alcatel-yarisxl.dts b/arch/arm/boot/dts/mediatek/mt6582-alcatel-yarisxl.dts
new file mode 100644
index 000000000000..f55d8edad1ac
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt6582-alcatel-yarisxl.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2025 Cristian Cozzolino <cristian_ci@protonmail.com>
+ */
+
+/dts-v1/;
+#include "mt6582.dtsi"
+
+/ {
+	model = "Alcatel One Touch Pop C7 (OT-7041D)";
+	compatible = "alcatel,yarisxl", "mediatek,mt6582";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		stdout-path = "serial0:921600n8";
+
+		framebuffer: framebuffer@9fa00000 {
+			compatible = "simple-framebuffer";
+			memory-region = <&framebuffer_reserved>;
+			width = <480>;
+			height = <854>;
+			stride = <(480 * 4)>;
+			format = "r5g6b5";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		connsys@9f900000 {
+			reg = <0x9f900000 0x100000>;
+			no-map;
+		};
+
+		modem@9e000000 {
+			reg = <0x9e000000 0x1800000>;
+			no-map;
+		};
+
+		framebuffer_reserved: framebuffer@9fa00000 {
+			reg = <0x9fa00000 0x600000>;
+			no-map;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mediatek/mt6582-prestigio-pmt5008-3g.dts b/arch/arm/boot/dts/mediatek/mt6582-prestigio-pmt5008-3g.dts
new file mode 100644
index 000000000000..b057e037f940
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt6582-prestigio-pmt5008-3g.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2021 Maxim Kutnij <gtk3@inbox.ru>
+ */
+
+/dts-v1/;
+#include "mt6582.dtsi"
+
+/ {
+	model = "Prestigio PMT5008 3G";
+	compatible = "prestigio,pmt5008-3g", "mediatek,mt6582";
+
+	aliases {
+		bootargs = "console=ttyS0,921600n8 earlyprintk";
+		serial0 = &uart0;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mediatek/mt6582.dtsi b/arch/arm/boot/dts/mediatek/mt6582.dtsi
new file mode 100644
index 000000000000..f941ea44898a
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt6582.dtsi
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2021 Maxim Kutnij <gtk3@inbox.ru>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&sysirq>;
+
+	cpus {
+		#size-cells = <0>;
+		#address-cells = <1>;
+		enable-method = "mediatek,mt6589-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x3>;
+		};
+	};
+
+	uart_clk: dummy26m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	system_clk: dummy13m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <13000000>;
+	};
+
+	rtc_clk: dummy32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32000>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		watchdog: watchdog@10007000 {
+			compatible = "mediatek,mt6582-wdt", "mediatek,mt6589-wdt";
+			reg = <0x10007000 0x100>;
+		};
+
+		timer: timer@10008000 {
+			compatible = "mediatek,mt6582-timer", "mediatek,mt6577-timer";
+			reg = <0x10008000 0x80>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&system_clk>, <&rtc_clk>;
+		};
+
+		sysirq: interrupt-controller@10200100 {
+			compatible = "mediatek,mt6582-sysirq", "mediatek,mt6577-sysirq";
+			reg = <0x10200100 0x1c>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		gic: interrupt-controller@10211000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupt-parent = <&gic>;
+			reg = <0x10211000 0x1000>,
+			      <0x10212000 0x2000>,
+			      <0x10214000 0x2000>,
+			      <0x10216000 0x2000>;
+		};
+
+		uart0: serial@11002000 {
+			compatible = "mediatek,mt6582-uart", "mediatek,mt6577-uart";
+			reg = <0x11002000 0x400>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			clock-names = "baud";
+			status = "disabled";
+		};
+
+		uart1: serial@11003000 {
+			compatible = "mediatek,mt6582-uart", "mediatek,mt6577-uart";
+			reg = <0x11003000 0x400>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			clock-names = "baud";
+			status = "disabled";
+		};
+
+		uart2: serial@11004000 {
+			compatible = "mediatek,mt6582-uart", "mediatek,mt6577-uart";
+			reg = <0x11004000 0x400>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			clock-names = "baud";
+			status = "disabled";
+		};
+
+		uart3: serial@11005000 {
+			compatible = "mediatek,mt6582-uart", "mediatek,mt6577-uart";
+			reg = <0x11005000 0x400>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			clock-names = "baud";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/mt6589-aquaris5.dts b/arch/arm/boot/dts/mediatek/mt6589-aquaris5.dts
index 1e7079a3b449..1e7079a3b449 100644
--- a/arch/arm/boot/dts/mt6589-aquaris5.dts
+++ b/arch/arm/boot/dts/mediatek/mt6589-aquaris5.dts
diff --git a/arch/arm/boot/dts/mediatek/mt6589-fairphone-fp1.dts b/arch/arm/boot/dts/mediatek/mt6589-fairphone-fp1.dts
new file mode 100644
index 000000000000..c952347981de
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt6589-fairphone-fp1.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Luca Weiss <luca@z3ntu.xyz>
+ */
+
+/dts-v1/;
+#include "mt6589.dtsi"
+
+/ {
+	model = "Fairphone 1";
+	compatible = "fairphone,fp1", "mediatek,mt6589";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&cpus {
+	/* SMP is not stable on this board, makes the kernel panic */
+	/delete-property/ enable-method;
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mt6589.dtsi b/arch/arm/boot/dts/mediatek/mt6589.dtsi
index 70df00a7bb26..c6babc8ad2ba 100644
--- a/arch/arm/boot/dts/mt6589.dtsi
+++ b/arch/arm/boot/dts/mediatek/mt6589.dtsi
@@ -14,7 +14,7 @@
 	compatible = "mediatek,mt6589";
 	interrupt-parent = <&sysirq>;
 
-	cpus {
+	cpus: cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		enable-method = "mediatek,mt6589-smp";
diff --git a/arch/arm/boot/dts/mt6592-evb.dts b/arch/arm/boot/dts/mediatek/mt6592-evb.dts
index 5e00c1cca2d1..5e00c1cca2d1 100644
--- a/arch/arm/boot/dts/mt6592-evb.dts
+++ b/arch/arm/boot/dts/mediatek/mt6592-evb.dts
diff --git a/arch/arm/boot/dts/mt6592.dtsi b/arch/arm/boot/dts/mediatek/mt6592.dtsi
index 3716f8db951c..3716f8db951c 100644
--- a/arch/arm/boot/dts/mt6592.dtsi
+++ b/arch/arm/boot/dts/mediatek/mt6592.dtsi
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mediatek/mt7623.dtsi
index a7d62dbad602..4b1685b93989 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mediatek/mt7623.dtsi
@@ -241,7 +241,7 @@
 	};
 
 	pericfg: syscon@10003000 {
-		compatible =  "mediatek,mt7623-pericfg",
+		compatible = "mediatek,mt7623-pericfg",
 			      "mediatek,mt2701-pericfg",
 			      "syscon";
 		reg = <0 0x10003000 0 0x1000>;
@@ -253,7 +253,6 @@
 		compatible = "mediatek,mt7623-pinctrl";
 		reg = <0 0x1000b000 0 0x1000>;
 		mediatek,pctl-regmap = <&syscfg_pctl_a>;
-		pins-are-numbered;
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
@@ -309,7 +308,7 @@
 		clock-names = "spi", "wrap";
 	};
 
-	cir: cir@10013000 {
+	cir: ir-receiver@10013000 {
 		compatible = "mediatek,mt7623-cir";
 		reg = <0 0x10013000 0 0x1000>;
 		interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
@@ -585,6 +584,39 @@
 		status = "disabled";
 	};
 
+	usb0: usb@11200000 {
+		compatible = "mediatek,mt7623-musb",
+			     "mediatek,mtk-musb";
+		reg = <0 0x11200000 0 0x1000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "mc";
+		phys = <&u2port2 PHY_TYPE_USB2>;
+		dr_mode = "otg";
+		clocks = <&pericfg CLK_PERI_USB0>,
+			 <&pericfg CLK_PERI_USB0_MCU>,
+			 <&pericfg CLK_PERI_USB_SLV>;
+		clock-names = "main","mcu","univpll";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
+		status = "disabled";
+	};
+
+	u2phy1: t-phy@11210000 {
+		compatible = "mediatek,mt7623-tphy",
+			     "mediatek,generic-tphy-v1";
+		reg = <0 0x11210000 0 0x0800>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		u2port2: usb-phy@11210800 {
+			reg = <0 0x11210800 0 0x0100>;
+			clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+		};
+	};
+
 	audsys: clock-controller@11220000 {
 		compatible = "mediatek,mt7623-audsys",
 			     "mediatek,mt2701-audsys",
@@ -595,9 +627,9 @@
 		afe: audio-controller {
 			compatible = "mediatek,mt7623-audio",
 				     "mediatek,mt2701-audio";
-			interrupts =  <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
 				      <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
-			interrupt-names	= "afe", "asys";
+			interrupt-names = "afe", "asys";
 			power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
 
 			clocks = <&infracfg CLK_INFRA_AUDIO>,
@@ -712,8 +744,7 @@
 
 	hifsys: syscon@1a000000 {
 		compatible = "mediatek,mt7623-hifsys",
-			     "mediatek,mt2701-hifsys",
-			     "syscon";
+			     "mediatek,mt2701-hifsys";
 		reg = <0 0x1a000000 0 0x1000>;
 		#clock-cells = <1>;
 		#reset-cells = <1>;
@@ -948,6 +979,18 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		status = "disabled";
+
+		gmac0: mac@0 {
+			compatible = "mediatek,eth-mac";
+			reg = <0>;
+			status = "disabled";
+		};
+
+		gmac1: mac@1 {
+			compatible = "mediatek,eth-mac";
+			reg = <1>;
+			status = "disabled";
+		};
 	};
 
 	crypto: crypto@1b240000 {
@@ -1099,13 +1142,13 @@
 				 <MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>,
 				 <MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>;
 			input-enable;
-			drive-strength = <MTK_DRIVE_2mA>;
+			drive-strength = <2>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 		};
 
 		pins-clk {
 			pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>;
-			drive-strength = <MTK_DRIVE_2mA>;
+			drive-strength = <2>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
 		};
 
@@ -1123,14 +1166,14 @@
 				 <MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>,
 				 <MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>;
 			input-enable;
-			drive-strength = <MTK_DRIVE_4mA>;
+			drive-strength = <4>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
 		};
 
 		pins-clk {
 			pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>;
 			bias-pull-down;
-			drive-strength = <MTK_DRIVE_4mA>;
+			drive-strength = <4>;
 		};
 
 		pins-wp {
@@ -1153,13 +1196,13 @@
 				 <MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>,
 				 <MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>;
 			input-enable;
-			drive-strength = <MTK_DRIVE_4mA>;
+			drive-strength = <4>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
 		};
 
 		pins-clk {
 			pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>;
-			drive-strength = <MTK_DRIVE_4mA>;
+			drive-strength = <4>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 		};
 	};
@@ -1167,7 +1210,7 @@
 	nand_pins_default: nanddefault {
 		pins-ale {
 			pinmux = <MT7623_PIN_116_MSDC0_CMD_FUNC_NALE>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 		};
 
@@ -1182,13 +1225,13 @@
 				 <MT7623_PIN_115_MSDC0_RSTB_FUNC_NLD8>,
 				 <MT7623_PIN_119_MSDC0_DAT2_FUNC_NLD2>;
 			input-enable;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-up;
 		};
 
 		pins-we {
 			pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_NWEB>;
-			drive-strength = <MTK_DRIVE_8mA>;
+			drive-strength = <8>;
 			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
 		};
 	};
diff --git a/arch/arm/boot/dts/mt7623a-rfb-emmc.dts b/arch/arm/boot/dts/mediatek/mt7623a-rfb-emmc.dts
index 13c86936d1c8..5654284bab01 100644
--- a/arch/arm/boot/dts/mt7623a-rfb-emmc.dts
+++ b/arch/arm/boot/dts/mediatek/mt7623a-rfb-emmc.dts
@@ -45,13 +45,13 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&key_pins_a>;
 
-		factory {
+		button-factory {
 			label = "factory";
 			linux,code = <BTN_0>;
 			gpios = <&pio 256 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "wps";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
@@ -112,75 +112,31 @@
 	status = "okay";
 };
 
-&eth {
-	status = "okay";
+&switch0 {
+	ports {
+		port@0 {
+			status = "okay";
+			label = "lan0";
+		};
+
+		port@1 {
+			status = "okay";
+			label = "lan1";
+		};
 
-	gmac0: mac@0 {
-		compatible = "mediatek,eth-mac";
-		reg = <0>;
-		phy-mode = "trgmii";
+		port@2 {
+			status = "okay";
+			label = "lan2";
+		};
 
-		fixed-link {
-			speed = <1000>;
-			full-duplex;
-			pause;
+		port@3 {
+			status = "okay";
+			label = "lan3";
 		};
-	};
 
-	mdio-bus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		switch@0 {
-			compatible = "mediatek,mt7530";
-			reg = <0>;
-			mediatek,mcm;
-			resets = <&ethsys MT2701_ETHSYS_MCM_RST>;
-			reset-names = "mcm";
-			core-supply = <&mt6323_vpa_reg>;
-			io-supply = <&mt6323_vemc3v3_reg>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					label = "lan0";
-				};
-
-				port@1 {
-					reg = <1>;
-					label = "lan1";
-				};
-
-				port@2 {
-					reg = <2>;
-					label = "lan2";
-				};
-
-				port@3 {
-					reg = <3>;
-					label = "lan3";
-				};
-
-				port@4 {
-					reg = <4>;
-					label = "wan";
-				};
-
-				port@6 {
-					reg = <6>;
-					label = "cpu";
-					ethernet = <&gmac0>;
-					phy-mode = "trgmii";
-
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-			};
+		port@4 {
+			status = "okay";
+			label = "wan";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/mt7623a-rfb-nand.dts b/arch/arm/boot/dts/mediatek/mt7623a-rfb-nand.dts
index 88d8f0b2f4c2..afd177b3b516 100644
--- a/arch/arm/boot/dts/mt7623a-rfb-nand.dts
+++ b/arch/arm/boot/dts/mediatek/mt7623a-rfb-nand.dts
@@ -45,13 +45,13 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&key_pins_a>;
 
-		factory {
+		button-factory {
 			label = "factory";
 			linux,code = <BTN_0>;
 			gpios = <&pio 256 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "wps";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
@@ -116,75 +116,31 @@
 	status = "okay";
 };
 
-&eth {
-	status = "okay";
+&switch0 {
+	ports {
+		port@0 {
+			status = "okay";
+			label = "lan0";
+		};
 
-	gmac0: mac@0 {
-		compatible = "mediatek,eth-mac";
-		reg = <0>;
-		phy-mode = "trgmii";
+		port@1 {
+			status = "okay";
+			label = "lan1";
+		};
 
-		fixed-link {
-			speed = <1000>;
-			full-duplex;
-			pause;
+		port@2 {
+			status = "okay";
+			label = "lan2";
 		};
-	};
 
-	mdio-bus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		switch@0 {
-			compatible = "mediatek,mt7530";
-			reg = <0>;
-			mediatek,mcm;
-			resets = <&ethsys MT2701_ETHSYS_MCM_RST>;
-			reset-names = "mcm";
-			core-supply = <&mt6323_vpa_reg>;
-			io-supply = <&mt6323_vemc3v3_reg>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					label = "lan0";
-				};
-
-				port@1 {
-					reg = <1>;
-					label = "lan1";
-				};
-
-				port@2 {
-					reg = <2>;
-					label = "lan2";
-				};
-
-				port@3 {
-					reg = <3>;
-					label = "lan3";
-				};
-
-				port@4 {
-					reg = <4>;
-					label = "wan";
-				};
-
-				port@6 {
-					reg = <6>;
-					label = "cpu";
-					ethernet = <&gmac0>;
-					phy-mode = "trgmii";
-
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-			};
+		port@3 {
+			status = "okay";
+			label = "lan3";
+		};
+
+		port@4 {
+			status = "okay";
+			label = "wan";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/mediatek/mt7623a.dtsi b/arch/arm/boot/dts/mediatek/mt7623a.dtsi
new file mode 100644
index 000000000000..bcf909d58a1c
--- /dev/null
+++ b/arch/arm/boot/dts/mediatek/mt7623a.dtsi
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017-2018 MediaTek Inc.
+ * Author: Sean Wang <sean.wang@mediatek.com>
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/power/mt7623a-power.h>
+#include "mt7623.dtsi"
+
+&afe {
+	power-domains = <&scpsys MT7623A_POWER_DOMAIN_IFR_MSC>;
+};
+
+&crypto {
+	power-domains = <&scpsys MT7623A_POWER_DOMAIN_ETH>;
+};
+
+&gmac0 {
+	status = "okay";
+	phy-mode = "trgmii";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+		pause;
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+		pause;
+	};
+};
+
+&eth {
+	status = "okay";
+	power-domains = <&scpsys MT7623A_POWER_DOMAIN_ETH>;
+
+	mdio: mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch0: switch@1f {
+			compatible = "mediatek,mt7530";
+			reg = <0x1f>;
+			mediatek,mcm;
+			resets = <&ethsys MT2701_ETHSYS_MCM_RST>;
+			reset-names = "mcm";
+			core-supply = <&mt6323_vpa_reg>;
+			io-supply = <&mt6323_vemc3v3_reg>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					status = "disabled";
+					reg = <0>;
+					label = "swp0";
+				};
+
+				port@1 {
+					status = "disabled";
+					reg = <1>;
+					label = "swp1";
+				};
+
+				port@2 {
+					status = "disabled";
+					reg = <2>;
+					label = "swp2";
+				};
+
+				port@3 {
+					status = "disabled";
+					reg = <3>;
+					label = "swp3";
+				};
+
+				port@4 {
+					status = "disabled";
+					reg = <4>;
+					label = "swp4";
+				};
+
+				port@5 {
+					reg = <5>;
+					label = "cpu";
+					ethernet = <&gmac1>;
+					phy-mode = "rgmii";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+						pause;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					label = "cpu";
+					ethernet = <&gmac0>;
+					phy-mode = "trgmii";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+						pause;
+					};
+				};
+			};
+		};
+	};
+};
+
+&nandc {
+	power-domains = <&scpsys MT7623A_POWER_DOMAIN_IFR_MSC>;
+};
+
+&pcie {
+	power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>;
+};
+
+&scpsys {
+	compatible = "mediatek,mt7623a-scpsys";
+	clocks = <&topckgen CLK_TOP_ETHIF_SEL>;
+	clock-names = "ethif";
+};
+
+&usb0 {
+	power-domains = <&scpsys MT7623A_POWER_DOMAIN_IFR_MSC>;
+};
+
+&usb1 {
+	power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>;
+};
+
+&usb2 {
+	power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>;
+};
diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mediatek/mt7623n-bananapi-bpi-r2.dts
index e96aa0ed1ebd..a37f3fa223c7 100644
--- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
+++ b/arch/arm/boot/dts/mediatek/mt7623n-bananapi-bpi-r2.dts
@@ -91,13 +91,13 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&key_pins_a>;
 
-		factory {
+		button-factory {
 			label = "factory";
 			linux,code = <BTN_0>;
 			gpios = <&pio 256 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "wps";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
@@ -171,28 +171,38 @@
 	};
 };
 
-&eth {
+&gmac0 {
 	status = "okay";
+	phy-mode = "trgmii";
 
-	gmac0: mac@0 {
-		compatible = "mediatek,eth-mac";
-		reg = <0>;
-		phy-mode = "trgmii";
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+		pause;
+	};
+};
 
-		fixed-link {
-			speed = <1000>;
-			full-duplex;
-			pause;
-		};
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+		pause;
 	};
+};
 
-	mdio: mdio-bus {
+&eth {
+	status = "okay";
+
+	mdio-bus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		switch@0 {
+		switch@1f {
 			compatible = "mediatek,mt7530";
-			reg = <0>;
+			reg = <0x1f>;
 			reset-gpios = <&pio 33 0>;
 			core-supply = <&mt6323_vpa_reg>;
 			io-supply = <&mt6323_vemc3v3_reg>;
@@ -226,6 +236,19 @@
 					label = "lan3";
 				};
 
+				port@5 {
+					reg = <5>;
+					label = "cpu";
+					ethernet = <&gmac1>;
+					phy-mode = "rgmii";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+						pause;
+					};
+				};
+
 				port@6 {
 					reg = <6>;
 					label = "cpu";
@@ -322,6 +345,12 @@
 	vqmmc-supply = <&reg_3p3v>;
 };
 
+&mt6323keys {
+	home {
+		status = "disabled";
+	};
+};
+
 &mt6323_leds {
 	status = "okay";
 
@@ -366,6 +395,14 @@
 	status = "okay";
 };
 
+&pio {
+	musb_pins: musb {
+		pins-musb {
+			pinmux = <MT7623_PIN_237_EXT_SDIO2_FUNC_DRV_VBUS>;
+		};
+	};
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm_pins_a>;
@@ -396,6 +433,19 @@
 	status = "okay";
 };
 
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&musb_pins>;
+	status = "okay";
+	usb-role-switch;
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		id-gpios = <&pio 44 GPIO_ACTIVE_HIGH>;
+	};
+};
+
 &usb1 {
 	vusb33-supply = <&reg_3p3v>;
 	vbus-supply = <&reg_5v>;
@@ -408,6 +458,10 @@
 	status = "okay";
 };
 
+&u2phy1 {
+	status = "okay";
+};
+
 &u3phy1 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts b/arch/arm/boot/dts/mediatek/mt7623n-rfb-emmc.dts
index 1b9b9a8145a7..34994f3f5a4b 100644
--- a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
+++ b/arch/arm/boot/dts/mediatek/mt7623n-rfb-emmc.dts
@@ -60,13 +60,13 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&key_pins_a>;
 
-		factory {
+		button-factory {
 			label = "factory";
 			linux,code = <BTN_0>;
 			gpios = <&pio 256 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "wps";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
@@ -156,27 +156,25 @@
 	};
 };
 
-&eth {
+&gmac0 {
 	status = "okay";
+	phy-mode = "trgmii";
 
-	gmac0: mac@0 {
-		compatible = "mediatek,eth-mac";
-		reg = <0>;
-		phy-mode = "trgmii";
-
-		fixed-link {
-			speed = <1000>;
-			full-duplex;
-			pause;
-		};
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+		pause;
 	};
+};
 
-	mac@1 {
-		compatible = "mediatek,eth-mac";
-		reg = <1>;
-		phy-mode = "rgmii";
-		phy-handle = <&phy5>;
-	};
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&phy5>;
+};
+
+&eth {
+	status = "okay";
 
 	mdio-bus {
 		#address-cells = <1>;
@@ -187,9 +185,9 @@
 			phy-mode = "rgmii-rxid";
 		};
 
-		switch@0 {
+		switch@1f {
 			compatible = "mediatek,mt7530";
-			reg = <0>;
+			reg = <0x1f>;
 			reset-gpios = <&pio 33 0>;
 			core-supply = <&mt6323_vpa_reg>;
 			io-supply = <&mt6323_vemc3v3_reg>;
@@ -232,6 +230,7 @@
 					fixed-link {
 						speed = <1000>;
 						full-duplex;
+						pause;
 					};
 				};
 			};
diff --git a/arch/arm/boot/dts/mt7623n.dtsi b/arch/arm/boot/dts/mediatek/mt7623n.dtsi
index bcb0846e29fd..3e5cabf19cde 100644
--- a/arch/arm/boot/dts/mt7623n.dtsi
+++ b/arch/arm/boot/dts/mediatek/mt7623n.dtsi
@@ -116,12 +116,11 @@
 			     "mediatek,mt2701-jpgdec";
 		reg = <0 0x15004000 0 0x1000>;
 		interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
-		clocks =  <&imgsys CLK_IMG_JPGDEC_SMI>,
-			  <&imgsys CLK_IMG_JPGDEC>;
+		clocks = <&imgsys CLK_IMG_JPGDEC_SMI>,
+			 <&imgsys CLK_IMG_JPGDEC>;
 		clock-names = "jpgdec-smi",
 			      "jpgdec";
 		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-		mediatek,larb = <&larb2>;
 		iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
 			 <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
 	};
@@ -144,7 +143,6 @@
 		interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&mmsys CLK_MM_DISP_OVL>;
 		iommus = <&iommu MT2701_M4U_PORT_DISP_OVL_0>;
-		mediatek,larb = <&larb0>;
 	};
 
 	rdma0: rdma@14008000 {
@@ -154,7 +152,6 @@
 		interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&mmsys CLK_MM_DISP_RDMA>;
 		iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA>;
-		mediatek,larb = <&larb0>;
 	};
 
 	wdma@14009000 {
@@ -164,7 +161,6 @@
 		interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&mmsys CLK_MM_DISP_WDMA>;
 		iommus = <&iommu MT2701_M4U_PORT_DISP_WDMA>;
-		mediatek,larb = <&larb0>;
 	};
 
 	bls: pwm@1400a000 {
@@ -215,7 +211,6 @@
 		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&mmsys CLK_MM_DISP_RDMA1>;
 		iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA1>;
-		mediatek,larb = <&larb0>;
 	};
 
 	dpi0: dpi@14014000 {
diff --git a/arch/arm/boot/dts/mt7629-rfb.dts b/arch/arm/boot/dts/mediatek/mt7629-rfb.dts
index 9980c10c6e29..f24ebc20732a 100644
--- a/arch/arm/boot/dts/mt7629-rfb.dts
+++ b/arch/arm/boot/dts/mediatek/mt7629-rfb.dts
@@ -23,13 +23,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		reset {
+		button-reset {
 			label = "factory";
 			linux,code = <KEY_RESTART>;
 			gpios = <&pio 60 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "wps";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&pio 58 GPIO_ACTIVE_LOW>;
@@ -140,9 +140,10 @@
 	};
 };
 
-&pcie {
+&pcie1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie_pins>;
+	status = "okay";
 };
 
 &pciephy1 {
@@ -167,7 +168,7 @@
 	i2c_pins: i2c-pins {
 		mux {
 			function = "i2c";
-			groups =  "i2c_0";
+			groups = "i2c_0";
 		};
 
 		conf {
diff --git a/arch/arm/boot/dts/mt7629.dtsi b/arch/arm/boot/dts/mediatek/mt7629.dtsi
index 874043f0490d..acab0883a3bb 100644
--- a/arch/arm/boot/dts/mt7629.dtsi
+++ b/arch/arm/boot/dts/mediatek/mt7629.dtsi
@@ -106,8 +106,7 @@
 			compatible = "mediatek,mt7629-timer",
 				     "mediatek,mt6765-timer";
 			reg = <0x10009000 0x60>;
-			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk20m>;
 			clock-names = "clk20m";
 		};
@@ -361,16 +360,21 @@
 			#reset-cells = <1>;
 		};
 
-		pcie: pcie@1a140000 {
+		pciecfg: pciecfg@1a140000 {
+			compatible = "mediatek,generic-pciecfg", "syscon";
+			reg = <0x1a140000 0x1000>;
+		};
+
+		pcie1: pcie@1a145000 {
 			compatible = "mediatek,mt7629-pcie";
 			device_type = "pci";
-			reg = <0x1a140000 0x1000>,
-			      <0x1a145000 0x1000>;
-			reg-names = "subsys","port1";
+			reg = <0x1a145000 0x1000>;
+			reg-names = "port1";
+			linux,pci-domain = <1>;
 			#address-cells = <3>;
 			#size-cells = <2>;
-			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_LOW>,
-				     <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-names = "pcie_irq";
 			clocks = <&pciesys CLK_PCIE_P1_MAC_EN>,
 				 <&pciesys CLK_PCIE_P0_AHB_EN>,
 				 <&pciesys CLK_PCIE_P1_AUX_EN>,
@@ -391,26 +395,18 @@
 			power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
 			bus-range = <0x00 0xff>;
 			ranges = <0x82000000 0 0x20000000 0x20000000 0 0x10000000>;
+			status = "disabled";
 
-			pcie1: pcie@1,0 {
-				device_type = "pci";
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+					<0 0 0 2 &pcie_intc1 1>,
+					<0 0 0 3 &pcie_intc1 2>,
+					<0 0 0 4 &pcie_intc1 3>;
+			pcie_intc1: interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
 				#interrupt-cells = <1>;
-				ranges;
-				num-lanes = <1>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie_intc1 0>,
-						<0 0 0 2 &pcie_intc1 1>,
-						<0 0 0 3 &pcie_intc1 2>,
-						<0 0 0 4 &pcie_intc1 3>;
-
-				pcie_intc1: interrupt-controller {
-					interrupt-controller;
-					#address-cells = <0>;
-					#interrupt-cells = <1>;
-				};
 			};
 		};
 
diff --git a/arch/arm/boot/dts/mt8127-moose.dts b/arch/arm/boot/dts/mediatek/mt8127-moose.dts
index 560687af87dc..560687af87dc 100644
--- a/arch/arm/boot/dts/mt8127-moose.dts
+++ b/arch/arm/boot/dts/mediatek/mt8127-moose.dts
diff --git a/arch/arm/boot/dts/mt8127.dtsi b/arch/arm/boot/dts/mediatek/mt8127.dtsi
index aced173c2a52..aced173c2a52 100644
--- a/arch/arm/boot/dts/mt8127.dtsi
+++ b/arch/arm/boot/dts/mediatek/mt8127.dtsi
diff --git a/arch/arm/boot/dts/mt8135-evbp1.dts b/arch/arm/boot/dts/mediatek/mt8135-evbp1.dts
index f6147fe62f41..f6147fe62f41 100644
--- a/arch/arm/boot/dts/mt8135-evbp1.dts
+++ b/arch/arm/boot/dts/mediatek/mt8135-evbp1.dts
diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mediatek/mt8135.dtsi
index a031b3636318..0f291ad22d3a 100644
--- a/arch/arm/boot/dts/mt8135.dtsi
+++ b/arch/arm/boot/dts/mediatek/mt8135.dtsi
@@ -152,7 +152,6 @@
 			compatible = "mediatek,mt8135-pinctrl";
 			reg = <0 0x1000b000 0 0x1000>;
 			mediatek,pctl-regmap = <&syscfg_pctl_a &syscfg_pctl_b>;
-			pins-are-numbered;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
diff --git a/arch/arm/boot/dts/meson6-atv1200.dts b/arch/arm/boot/dts/meson6-atv1200.dts
deleted file mode 100644
index 98e1c94c0261..000000000000
--- a/arch/arm/boot/dts/meson6-atv1200.dts
+++ /dev/null
@@ -1,33 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-/*
- * Copyright 2014 Carlo Caione <carlo@caione.org>
- */
-
-/dts-v1/;
-#include "meson6.dtsi"
-
-/ {
-	model = "Geniatech ATV1200";
-	compatible = "geniatech,atv1200", "amlogic,meson6";
-
-	aliases {
-		serial0 = &uart_AO;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x40000000 0x80000000>;
-	};
-};
-
-&uart_AO {
-	status = "okay";
-};
-
-&ethmac {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/meson6.dtsi b/arch/arm/boot/dts/meson6.dtsi
deleted file mode 100644
index 4716030a48d0..000000000000
--- a/arch/arm/boot/dts/meson6.dtsi
+++ /dev/null
@@ -1,73 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-/*
- * Copyright 2014 Carlo Caione <carlo@caione.org>
- */
-
-#include "meson.dtsi"
-
-/ {
-	model = "Amlogic Meson6 SoC";
-	compatible = "amlogic,meson6";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@200 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <0x200>;
-		};
-
-		cpu@201 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <0x201>;
-		};
-	};
-
-	apb2: bus@d0000000 {
-		compatible = "simple-bus";
-		reg = <0xd0000000 0x40000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0xd0000000 0x40000>;
-	};
-
-	clk81: clk@0 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <200000000>;
-	};
-}; /* end of / */
-
-&efuse {
-	status = "disabled";
-};
-
-&timer_abcde {
-	clocks = <&xtal>, <&clk81>;
-	clock-names = "xtal", "pclk";
-};
-
-&uart_AO {
-	clocks = <&xtal>, <&clk81>, <&clk81>;
-	clock-names = "xtal", "pclk", "baud";
-};
-
-&uart_A {
-	clocks = <&xtal>, <&clk81>, <&clk81>;
-	clock-names = "xtal", "pclk", "baud";
-};
-
-&uart_B {
-	clocks = <&xtal>, <&clk81>, <&clk81>;
-	clock-names = "xtal", "pclk", "baud";
-};
-
-&uart_C {
-	clocks = <&xtal>, <&clk81>, <&clk81>;
-	clock-names = "xtal", "pclk", "baud";
-};
diff --git a/arch/arm/boot/dts/microchip/Makefile b/arch/arm/boot/dts/microchip/Makefile
new file mode 100644
index 000000000000..79cd38fdc7da
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/Makefile
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: GPL-2.0
+# Enables support for device-tree overlays
+DTC_FLAGS_at91-sam9x60_curiosity := -@
+DTC_FLAGS_at91-sam9x60ek := -@
+DTC_FLAGS_at91-sam9x75_curiosity := -@
+DTC_FLAGS_at91-sama5d27_som1_ek := -@
+DTC_FLAGS_at91-sama5d27_wlsom1_ek := -@
+DTC_FLAGS_at91-sama5d29_curiosity := -@
+DTC_FLAGS_at91-sama5d2_icp := -@
+DTC_FLAGS_at91-sama5d2_ptc_ek := -@
+DTC_FLAGS_at91-sama5d2_xplained := -@
+DTC_FLAGS_at91-sama5d3_eds := -@
+DTC_FLAGS_at91-sama5d3_xplained := -@
+DTC_FLAGS_at91-sama5d4_xplained := -@
+DTC_FLAGS_at91-sama7d65_curiosity := -@
+DTC_FLAGS_at91-sama7g54_curiosity := -@
+DTC_FLAGS_at91-sama7g5ek := -@
+dtb-$(CONFIG_SOC_AT91RM9200) += \
+	at91rm9200ek.dtb \
+	mpa1600.dtb
+dtb-$(CONFIG_SOC_AT91SAM9) += \
+	animeo_ip.dtb \
+	at91-qil_a9260.dtb \
+	aks-cdu.dtb \
+	ethernut5.dtb \
+	evk-pro3.dtb \
+	tny_a9260.dtb \
+	usb_a9260.dtb \
+	at91sam9260ek.dtb \
+	at91sam9261ek.dtb \
+	at91sam9263ek.dtb \
+	at91-sam9_l9260.dtb \
+	tny_a9263.dtb \
+	usb_a9263.dtb \
+	at91-foxg20.dtb \
+	at91-kizbox.dtb \
+	at91-lmu5000.dtb \
+	at91sam9g20ek.dtb \
+	at91sam9g20ek_2mmc.dtb \
+	tny_a9g20.dtb \
+	usb_a9g20.dtb \
+	usb_a9g20_lpw.dtb \
+	at91sam9m10g45ek.dtb \
+	pm9g45.dtb \
+	at91sam9n12ek.dtb \
+	at91sam9rlek.dtb \
+	at91-ariag25.dtb \
+	at91-ariettag25.dtb \
+	at91-cosino_mega2560.dtb \
+	at91-kizboxmini-base.dtb \
+	at91-kizboxmini-mb.dtb \
+	at91-kizboxmini-rd.dtb \
+	at91-q5xr5.dtb \
+	at91-smartkiz.dtb \
+	at91-wb45n.dtb \
+	at91sam9g15ek.dtb \
+	at91sam9g25-gardena-smart-gateway.dtb \
+	at91sam9g25ek.dtb \
+	at91sam9g35ek.dtb \
+	at91sam9x25ek.dtb \
+	at91sam9x35ek.dtb
+dtb-$(CONFIG_SOC_SAM9X60) += \
+	at91-sam9x60_curiosity.dtb \
+	at91-sam9x60ek.dtb
+dtb-$(CONFIG_SOC_SAM9X7) += \
+	at91-sam9x75_curiosity.dtb
+dtb-$(CONFIG_SOC_SAM_V7) += \
+	at91-kizbox2-2.dtb \
+	at91-kizbox3-hs.dtb \
+	at91-nattis-2-natte-2.dtb \
+	at91-sama5d27_som1_ek.dtb \
+	at91-sama5d27_wlsom1_ek.dtb \
+	at91-sama5d29_curiosity.dtb \
+	at91-sama5d2_icp.dtb \
+	at91-sama5d2_ptc_ek.dtb \
+	at91-sama5d2_xplained.dtb \
+	at91-sama5d3_eds.dtb \
+	at91-sama5d3_ksz9477_evb.dtb \
+	at91-sama5d3_xplained.dtb \
+	at91-dvk_som60.dtb \
+	at91-gatwick.dtb \
+	at91-tse850-3.dtb \
+	at91-wb50n.dtb \
+	sama5d31ek.dtb \
+	sama5d33ek.dtb \
+	sama5d34ek.dtb \
+	sama5d35ek.dtb \
+	sama5d36ek.dtb \
+	sama5d36ek_cmp.dtb \
+	at91-sama5d4_ma5d4evk.dtb \
+	at91-sama5d4_xplained.dtb \
+	at91-sama5d4ek.dtb \
+	at91-vinco.dtb
+dtb-$(CONFIG_SOC_SAMA7D65) += \
+	at91-sama7d65_curiosity.dtb
+dtb-$(CONFIG_SOC_SAMA7G5) += \
+	at91-sama7g54_curiosity.dtb \
+	at91-sama7g5ek.dtb
+
+dtb-$(CONFIG_SOC_LAN966) += \
+	lan966x-kontron-kswitch-d10-mmt-6g-2gs.dtb \
+	lan966x-kontron-kswitch-d10-mmt-8g.dtb \
+	lan966x-pcb8290.dtb \
+	lan966x-pcb8291.dtb \
+	lan966x-pcb8309.dtb
diff --git a/arch/arm/boot/dts/aks-cdu.dts b/arch/arm/boot/dts/microchip/aks-cdu.dts
index 742fcf525e1b..302cb872efa1 100644
--- a/arch/arm/boot/dts/aks-cdu.dts
+++ b/arch/arm/boot/dts/microchip/aks-cdu.dts
@@ -56,7 +56,7 @@
 			};
 		};
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
@@ -98,23 +98,27 @@
 	leds {
 		compatible = "gpio-leds";
 
-		red {
+		led-red {
+			label = "red";
 			gpios = <&pioC 10 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "none";
 		};
 
-		green {
+		led-green {
+			label = "green";
 			gpios = <&pioA 5 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 			default-state = "on";
 		};
 
-		yellow {
+		led-yellow {
+			label = "yellow";
 			gpios = <&pioB 20 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		blue {
+		led-blue {
+			label = "blue";
 			gpios = <&pioB 21 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/microchip/animeo_ip.dts
index 7da718abbd85..c11f4f7dac94 100644
--- a/arch/arm/boot/dts/animeo_ip.dts
+++ b/arch/arm/boot/dts/microchip/animeo_ip.dts
@@ -136,7 +136,7 @@
 			};
 		};
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			num-ports = <2>;
 			atmel,vbus-gpio = <&pioB 15 GPIO_ACTIVE_LOW>;
 			status = "okay";
@@ -146,48 +146,46 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power_green {
+		led-power-green {
 			label = "power_green";
 			gpios = <&pioC 17 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		power_red {
+		led-power-red {
 			label = "power_red";
 			gpios = <&pioA 2 GPIO_ACTIVE_HIGH>;
 		};
 
-		tx_green {
+		led-tx-green {
 			label = "tx_green";
 			gpios = <&pioC 19 GPIO_ACTIVE_HIGH>;
 		};
 
-		tx_red {
+		led-tx-red {
 			label = "tx_red";
 			gpios = <&pioC 18 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		keyswitch_in {
+		key-switch-in {
 			label = "keyswitch_in";
 			gpios = <&pioB 1 GPIO_ACTIVE_HIGH>;
 			linux,code = <28>;
 			wakeup-source;
 		};
 
-		error_in {
+		key-error-in {
 			label = "error_in";
 			gpios = <&pioB 2 GPIO_ACTIVE_HIGH>;
 			linux,code = <29>;
 			wakeup-source;
 		};
 
-		btn {
+		key-s {
 			label = "btn";
 			gpios = <&pioC 23 GPIO_ACTIVE_HIGH>;
 			linux,code = <31>;
diff --git a/arch/arm/boot/dts/at91-ariag25.dts b/arch/arm/boot/dts/microchip/at91-ariag25.dts
index 713d18f80356..713d18f80356 100644
--- a/arch/arm/boot/dts/at91-ariag25.dts
+++ b/arch/arm/boot/dts/microchip/at91-ariag25.dts
diff --git a/arch/arm/boot/dts/at91-ariettag25.dts b/arch/arm/boot/dts/microchip/at91-ariettag25.dts
index 2c52a71752c2..2c52a71752c2 100644
--- a/arch/arm/boot/dts/at91-ariettag25.dts
+++ b/arch/arm/boot/dts/microchip/at91-ariettag25.dts
diff --git a/arch/arm/boot/dts/at91-cosino.dtsi b/arch/arm/boot/dts/microchip/at91-cosino.dtsi
index ee0f5da6d819..ee0f5da6d819 100644
--- a/arch/arm/boot/dts/at91-cosino.dtsi
+++ b/arch/arm/boot/dts/microchip/at91-cosino.dtsi
diff --git a/arch/arm/boot/dts/at91-cosino_mega2560.dts b/arch/arm/boot/dts/microchip/at91-cosino_mega2560.dts
index 04cb7bee937d..04cb7bee937d 100644
--- a/arch/arm/boot/dts/at91-cosino_mega2560.dts
+++ b/arch/arm/boot/dts/microchip/at91-cosino_mega2560.dts
diff --git a/arch/arm/boot/dts/at91-dvk_som60.dts b/arch/arm/boot/dts/microchip/at91-dvk_som60.dts
index ededd5b0d27b..ededd5b0d27b 100644
--- a/arch/arm/boot/dts/at91-dvk_som60.dts
+++ b/arch/arm/boot/dts/microchip/at91-dvk_som60.dts
diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi b/arch/arm/boot/dts/microchip/at91-dvk_su60_somc.dtsi
index c1c8650dafce..3542ad8a243e 100644
--- a/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi
+++ b/arch/arm/boot/dts/microchip/at91-dvk_su60_somc.dtsi
@@ -44,7 +44,7 @@
 	status = "okay";
 
 	/* spi0.0: 4M Flash Macronix MX25R4035FM1IL0 */
-	spi-flash@0 {
+	flash@0 {
 		compatible = "mxicy,mx25u4035", "jedec,spi-nor";
 		spi-max-frequency = <33000000>;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi b/arch/arm/boot/dts/microchip/at91-dvk_su60_somc_lcm.dtsi
index bea920b192b6..bea920b192b6 100644
--- a/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi
+++ b/arch/arm/boot/dts/microchip/at91-dvk_su60_somc_lcm.dtsi
diff --git a/arch/arm/boot/dts/at91-foxg20.dts b/arch/arm/boot/dts/microchip/at91-foxg20.dts
index 7edf057047f8..8e9e87665045 100644
--- a/arch/arm/boot/dts/at91-foxg20.dts
+++ b/arch/arm/boot/dts/microchip/at91-foxg20.dts
@@ -131,7 +131,7 @@
 			};
 		};
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
@@ -155,10 +155,10 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		btn {
+		button {
 			label = "Button";
 			gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
 			linux,code = <0x103>;
diff --git a/arch/arm/boot/dts/at91-gatwick.dts b/arch/arm/boot/dts/microchip/at91-gatwick.dts
index 5a81cab5fc3a..551300fd7746 100644
--- a/arch/arm/boot/dts/at91-gatwick.dts
+++ b/arch/arm/boot/dts/microchip/at91-gatwick.dts
@@ -13,7 +13,7 @@
 	model = "Laird Workgroup Bridge 50N - Project Gatwick";
 	compatible = "laird,gatwick", "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 		autorepeat;
 
@@ -31,37 +31,37 @@
 	leds {
 		compatible = "gpio-leds";
 
-		ethernet {
+		led-ethernet {
 			label = "gatwick:yellow:ethernet";
 			gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		wifi {
+		led-wifi {
 			label = "gatwick:green:wifi";
 			gpios = <&pioA 28 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		ble {
+		led-ble {
 			label = "gatwick:blue:ble";
 			gpios = <&pioA 22 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		lora {
+		led-lora {
 			label = "gatwick:orange:lora";
 			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		blank {
+		led-blank {
 			label = "gatwick:green:blank";
 			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		user {
+		led-user {
 			label = "gatwick:yellow:user";
 			gpios = <&pioA 12 GPIO_ACTIVE_LOW>;
 			default-state = "off";
diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/microchip/at91-kizbox.dts
index 3b8812fcd854..307663b4eec2 100644
--- a/arch/arm/boot/dts/at91-kizbox.dts
+++ b/arch/arm/boot/dts/microchip/at91-kizbox.dts
@@ -28,19 +28,17 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		reset {
+		button-reset {
 			label = "PB_RST";
 			gpios = <&pioB 30 GPIO_ACTIVE_HIGH>;
 			linux,code = <0x100>;
 			wakeup-source;
 		};
 
-		user {
+		button-user {
 			label = "PB_USER";
 			gpios = <&pioB 31 GPIO_ACTIVE_HIGH>;
 			linux,code = <0x101>;
diff --git a/arch/arm/boot/dts/at91-kizbox2-2.dts b/arch/arm/boot/dts/microchip/at91-kizbox2-2.dts
index cab8b3579efa..cab8b3579efa 100644
--- a/arch/arm/boot/dts/at91-kizbox2-2.dts
+++ b/arch/arm/boot/dts/microchip/at91-kizbox2-2.dts
diff --git a/arch/arm/boot/dts/at91-kizbox2-common.dtsi b/arch/arm/boot/dts/microchip/at91-kizbox2-common.dtsi
index c08834ddf07b..a44d92305dbb 100644
--- a/arch/arm/boot/dts/at91-kizbox2-common.dtsi
+++ b/arch/arm/boot/dts/microchip/at91-kizbox2-common.dtsi
@@ -31,26 +31,24 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		prog {
+		button-prog {
 			label = "PB_PROG";
 			gpios = <&pioE 27 GPIO_ACTIVE_LOW>;
 			linux,code = <0x102>;
 			wakeup-source;
 		};
 
-		reset {
+		button-reset {
 			label = "PB_RST";
 			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
 			linux,code = <0x100>;
 			wakeup-source;
 		};
 
-		user {
+		button-user {
 			label = "PB_USER";
 			gpios = <&pioE 31 GPIO_ACTIVE_HIGH>;
 			linux,code = <0x101>;
@@ -87,7 +85,7 @@
 &i2c1 {
 	status = "okay";
 
-	pmic: act8865@5b {
+	act8865: pmic@5b {
 		compatible = "active-semi,act8865";
 		reg = <0x5b>;
 		status = "okay";
diff --git a/arch/arm/boot/dts/at91-kizbox3-hs.dts b/arch/arm/boot/dts/microchip/at91-kizbox3-hs.dts
index 2799b2a1f4d2..fec7269088d1 100644
--- a/arch/arm/boot/dts/at91-kizbox3-hs.dts
+++ b/arch/arm/boot/dts/microchip/at91-kizbox3-hs.dts
@@ -55,7 +55,7 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default" , "default", "default",
 				"default", "default" ;
@@ -68,35 +68,35 @@
 			     &pinctrl_pio_zbe_rst>;
 		pinctrl-4 = <&pinctrl_pio_input>;
 
-		SW1 {
+		switch-1 {
 			label = "SW1";
 			gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
 			linux,code = <0x101>;
 			wakeup-source;
 		};
 
-		SW2 {
+		switch-2 {
 			label = "SW2";
 			gpios = <&pioA PIN_PA18 GPIO_ACTIVE_LOW>;
 			linux,code = <0x102>;
 			wakeup-source;
 		};
 
-		SW3 {
+		switch-3 {
 			label = "SW3";
 			gpios = <&pioA PIN_PA22 GPIO_ACTIVE_LOW>;
 			linux,code = <0x103>;
 			wakeup-source;
 		};
 
-		SW7 {
+		switch-7 {
 			label = "SW7";
 			gpios = <&pioA PIN_PA26 GPIO_ACTIVE_LOW>;
 			linux,code = <0x107>;
 			wakeup-source;
 		};
 
-		SW8 {
+		switch-8 {
 			label = "SW8";
 			gpios = <&pioA PIN_PA24 GPIO_ACTIVE_LOW>;
 			linux,code = <0x108>;
@@ -186,7 +186,7 @@
 
 &pioA {
 	pinctrl_key_gpio_default: key_gpio_default {
-		pinmux=  <PIN_PA22__GPIO>,
+		pinmux = <PIN_PA22__GPIO>,
 		<PIN_PA24__GPIO>,
 		<PIN_PA26__GPIO>,
 		<PIN_PA29__GPIO>,
@@ -225,7 +225,7 @@
 		pinctrl_pio_io_reset: gpio_io_reset {
 			pinmux = <PIN_PB30__GPIO>;
 			bias-disable;
-			drive-open-drain = <1>;
+			drive-open-drain;
 			output-low;
 		};
 		pinctrl_pio_input: gpio_input {
diff --git a/arch/arm/boot/dts/at91-kizbox3_common.dtsi b/arch/arm/boot/dts/microchip/at91-kizbox3_common.dtsi
index abe27adfa4d6..465664628419 100644
--- a/arch/arm/boot/dts/at91-kizbox3_common.dtsi
+++ b/arch/arm/boot/dts/microchip/at91-kizbox3_common.dtsi
@@ -211,7 +211,7 @@
 		pinmux = <PIN_PD12__FLEXCOM4_IO0>, //DATA
 		<PIN_PD13__FLEXCOM4_IO1>; //CLK
 		bias-disable;
-		drive-open-drain = <1>;
+		drive-open-drain;
 	};
 
 	pinctrl_pwm0 {
diff --git a/arch/arm/boot/dts/at91-kizboxmini-base.dts b/arch/arm/boot/dts/microchip/at91-kizboxmini-base.dts
index 81c29ca5cc1b..81c29ca5cc1b 100644
--- a/arch/arm/boot/dts/at91-kizboxmini-base.dts
+++ b/arch/arm/boot/dts/microchip/at91-kizboxmini-base.dts
diff --git a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi b/arch/arm/boot/dts/microchip/at91-kizboxmini-common.dtsi
index 9c622892c692..42640fe6b6d0 100644
--- a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
+++ b/arch/arm/boot/dts/microchip/at91-kizboxmini-common.dtsi
@@ -36,17 +36,15 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		prog {
+		key-prog {
 			label = "PB_PROG";
 			gpios = <&pioC 17 GPIO_ACTIVE_LOW>;
 			linux,code = <0x102>;
 			wakeup-source;
 		};
 
-		reset {
+		key-reset {
 			label = "PB_RST";
 			gpios = <&pioC 16 GPIO_ACTIVE_LOW>;
 			linux,code = <0x100>;
diff --git a/arch/arm/boot/dts/at91-kizboxmini-mb.dts b/arch/arm/boot/dts/microchip/at91-kizboxmini-mb.dts
index c07d3076a9bc..c07d3076a9bc 100644
--- a/arch/arm/boot/dts/at91-kizboxmini-mb.dts
+++ b/arch/arm/boot/dts/microchip/at91-kizboxmini-mb.dts
diff --git a/arch/arm/boot/dts/at91-kizboxmini-rd.dts b/arch/arm/boot/dts/microchip/at91-kizboxmini-rd.dts
index ab50f4d22387..ab50f4d22387 100644
--- a/arch/arm/boot/dts/at91-kizboxmini-rd.dts
+++ b/arch/arm/boot/dts/microchip/at91-kizboxmini-rd.dts
diff --git a/arch/arm/boot/dts/at91-linea.dtsi b/arch/arm/boot/dts/microchip/at91-linea.dtsi
index 533a440d5583..533a440d5583 100644
--- a/arch/arm/boot/dts/at91-linea.dtsi
+++ b/arch/arm/boot/dts/microchip/at91-linea.dtsi
diff --git a/arch/arm/boot/dts/microchip/at91-lmu5000.dts b/arch/arm/boot/dts/microchip/at91-lmu5000.dts
new file mode 100644
index 000000000000..f8863d7c0798
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-lmu5000.dts
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree file for CalAmp LMU5000 board
+ *
+ * Copyright (C) 2013 Adam Porter <porter.adam@gmail.com>
+ */
+
+/dts-v1/;
+#include "at91sam9g20.dtsi"
+
+/ {
+	model = "CalAmp LMU5000";
+	compatible = "calamp,lmu5000", "atmel,at91sam9g20", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "mem=64M console=ttyS0,115200 rootfstype=jffs2";
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <18432000>;
+		};
+	};
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&ebi {
+	status = "okay";
+
+	nand_controller: nand-controller {
+		pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		nand@3 {
+			reg = <0x3 0x0 0x800000>;
+			rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+			cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			label = "atmel_nand";
+			status = "okay";
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				kernel@0 {
+					label = "kernel";
+					reg = <0x0 0x400000>;
+				};
+
+				rootfs@400000 {
+					label = "rootfs";
+					reg = <0x400000 0x3C00000>;
+				};
+
+				user1@4000000 {
+					label = "user1";
+					reg = <0x4000000 0x2000000>;
+				};
+
+				user2@6000000 {
+					label = "user2";
+					reg = <0x6000000 0x2000000>;
+				};
+			};
+		};
+	};
+};
+
+&macb0 {
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&pinctrl {
+	board {
+		pinctrl_pck0_as_mck: pck0_as_mck {
+			atmel,pins = <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+	};
+
+	usb0 {
+		pinctrl_usb1_vbus_gpio: usb0_vbus_gpio {
+			atmel,pins = <AT91_PIOC 5 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+};
+
+&ssc0 {
+	status = "okay";
+	pinctrl-0 = <&pinctrl_ssc0_tx>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usart0 {
+	pinctrl-0 =
+		<&pinctrl_usart0
+		 &pinctrl_usart0_rts
+		 &pinctrl_usart0_cts
+		 &pinctrl_usart0_dtr_dsr
+		 &pinctrl_usart0_dcd
+		 &pinctrl_usart0_ri>;
+	status = "okay";
+};
+
+&usart2 {
+	status = "okay";
+};
+
+&usb0 {
+	num-ports = <2>;
+	status = "okay";
+};
+
+&usb1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1_vbus_gpio>;
+	atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-natte.dtsi b/arch/arm/boot/dts/microchip/at91-natte.dtsi
index 49f0a0c46cde..49f0a0c46cde 100644
--- a/arch/arm/boot/dts/at91-natte.dtsi
+++ b/arch/arm/boot/dts/microchip/at91-natte.dtsi
diff --git a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/microchip/at91-nattis-2-natte-2.dts
index 4f123477e631..f71377c9b757 100644
--- a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
+++ b/arch/arm/boot/dts/microchip/at91-nattis-2-natte-2.dts
@@ -18,7 +18,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wakeup {
+		key-wakeup {
 			label = "Wakeup";
 			linux,code = <10>;
 			wakeup-source;
diff --git a/arch/arm/boot/dts/microchip/at91-q5xr5.dts b/arch/arm/boot/dts/microchip/at91-q5xr5.dts
new file mode 100644
index 000000000000..9cf60b6f695c
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-q5xr5.dts
@@ -0,0 +1,181 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree file for Exegin Q5xR5 board
+ *
+ * Copyright (C) 2014 Owen Kirby <osk@exegin.com>
+ */
+
+/dts-v1/;
+#include "at91sam9g20.dtsi"
+
+/ {
+	model = "Exegin Q5x (rev5)";
+	compatible = "exegin,q5xr5", "atmel,at91sam9g20", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 rootfstype=squashfs,jffs2";
+	};
+
+	memory {
+		reg = <0x20000000 0x0>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <18432000>;
+		};
+
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&ebi {
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "cfi-flash";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0 0x1000000 0x800000>;
+		bank-width = <2>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			kernel@0 {
+				label = "kernel";
+				reg = <0x0 0x200000>;
+			};
+
+			rootfs@200000 {
+				label = "rootfs";
+				reg = <0x200000 0x600000>;
+			};
+		};
+	};
+};
+
+&macb0 {
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&pinctrl {
+	board {
+		pinctrl_pck0_as_mck: pck0_as_mck {
+			atmel,pins = <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+	};
+
+	spi0 {
+		pinctrl_spi0: spi0-0 {
+			atmel,pins =
+				<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_spi0_npcs0: spi0_npcs0 {
+			atmel,pins = <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_spi0_npcs1: spi0_npcs1 {
+			atmel,pins = <AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+	};
+
+	spi1 {
+		pinctrl_spi1: spi1-0 {
+			atmel,pins =
+				<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_spi1_npcs0: spi1_npcs0 {
+			atmel,pins = <AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_spi1_npcs1: spi1_npcs1 {
+			atmel,pins = <AT91_PIOC 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+	};
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi0 &pinctrl_spi0_npcs0 &pinctrl_spi0_npcs1>;
+	cs-gpios = <&pioA 3 GPIO_ACTIVE_HIGH>, <&pioC 11 GPIO_ACTIVE_LOW>, <0>, <0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		at91boot@0 {
+			label = "at91boot";
+			reg = <0x0 0x4000>;
+		};
+
+		uenv@4000 {
+			label = "uboot-env";
+			reg = <0x4000 0x4000>;
+		};
+
+		uboot@8000 {
+			label = "uboot";
+			reg = <0x8000 0x3E000>;
+		};
+	};
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1 &pinctrl_spi1_npcs0 &pinctrl_spi1_npcs1>;
+	cs-gpios = <&pioB 3 GPIO_ACTIVE_HIGH>, <&pioC 5 GPIO_ACTIVE_LOW>, <0>, <0>;
+	status = "okay";
+};
+
+&usart0 {
+	pinctrl-0 =
+		<&pinctrl_usart0
+		 &pinctrl_usart0_rts
+		 &pinctrl_usart0_cts
+		 &pinctrl_usart0_dtr_dsr
+		 &pinctrl_usart0_dcd
+		 &pinctrl_usart0_ri>;
+	status = "okay";
+};
+
+&usb0 {
+	num-ports = <2>;
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-qil_a9260.dts b/arch/arm/boot/dts/microchip/at91-qil_a9260.dts
index 969d990767fc..892dbd8dbbed 100644
--- a/arch/arm/boot/dts/at91-qil_a9260.dts
+++ b/arch/arm/boot/dts/microchip/at91-qil_a9260.dts
@@ -108,13 +108,13 @@
 				status = "okay";
 			};
 
-			shdwc@fffffd10 {
+			shdwc: poweroff@fffffd10 {
 				atmel,wakeup-counter = <10>;
 				atmel,wakeup-rtt-timer;
 			};
 		};
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
@@ -198,10 +198,8 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		user_pb {
+		button-user {
 			label = "user_pb";
 			gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
 			linux,code = <28>;
diff --git a/arch/arm/boot/dts/at91-sam9_l9260.dts b/arch/arm/boot/dts/microchip/at91-sam9_l9260.dts
index 1e2a28c2f365..49dc1a4ccb36 100644
--- a/arch/arm/boot/dts/at91-sam9_l9260.dts
+++ b/arch/arm/boot/dts/microchip/at91-sam9_l9260.dts
@@ -101,11 +101,11 @@
 		nand0: nand@40000000 {
 			nand-bus-width = <8>;
 			nand-ecc-mode = "soft";
-			nand-on-flash-bbt = <1>;
+			nand-on-flash-bbt;
 			status = "okay";
 		};
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts
new file mode 100644
index 000000000000..b9ffd9e5faac
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts
@@ -0,0 +1,508 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sam9x60_curiosity.dts - Device Tree file for Microchip SAM9X60 Curiosity board
+ *
+ * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Durai Manickam KR <durai.manickamkr@microchip.com>
+ */
+/dts-v1/;
+#include "sam9x60.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Microchip SAM9X60 Curiosity";
+	compatible = "microchip,sam9x60-curiosity", "microchip,sam9x60", "atmel,at91sam9";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c6;
+		serial2 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <24000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button-user {
+			label = "PB_USER";
+			gpios = <&pioA 29 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-red {
+			label = "red";
+			gpios = <&pioD 17 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-green {
+			label = "green";
+			gpios = <&pioD 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-blue {
+			label = "blue";
+			gpios = <&pioD 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+
+	vdd_1v8: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "VDD_1V8";
+	};
+
+	vdd_1v15: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <1150000>;
+		regulator-min-microvolt = <1150000>;
+		regulator-name = "VDD_1V15";
+	};
+
+	vdd1_3v3: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VDD1_3V3";
+	};
+};
+
+&adc {
+	vddana-supply = <&vdd1_3v3>;
+	vref-supply = <&vdd1_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0_rx_tx>;
+	status = "disabled"; /* Conflict with dbgu. */
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_rx_tx>;
+	status = "okay";
+};
+
+&dbgu {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dbgu>;
+	status = "okay"; /* Conflict with can0. */
+};
+
+&ebi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ebi_addr_nand &pinctrl_ebi_data_lsb>;
+	status = "okay";
+
+	nand_controller: nand-controller {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_nand_oe_we &pinctrl_nand_cs &pinctrl_nand_rb>;
+		status = "okay";
+
+		nand@3 {
+			reg = <0x3 0x0 0x800000>;
+			rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+			cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-ecc-strength = <8>;
+			nand-ecc-step-size = <512>;
+			nand-on-flash-bbt;
+			label = "atmel_nand";
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				at91bootstrap@0 {
+					label = "at91bootstrap";
+					reg = <0x0 0x40000>;
+				};
+
+				uboot@40000 {
+					label = "u-boot";
+					reg = <0x40000 0xc0000>;
+				};
+
+				ubootenvred@100000 {
+					label = "U-Boot Env Redundant";
+					reg = <0x100000 0x40000>;
+				};
+
+				ubootenv@140000 {
+					label = "U-Boot Env";
+					reg = <0x140000 0x40000>;
+				};
+
+				dtb@180000 {
+					label = "device tree";
+					reg = <0x180000 0x80000>;
+				};
+
+				kernel@200000 {
+					label = "kernel";
+					reg = <0x200000 0x600000>;
+				};
+
+				rootfs@800000 {
+					label = "rootfs";
+					reg = <0x800000 0x1f800000>;
+				};
+			};
+		};
+	};
+};
+
+&flx0 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c0: i2c@600 {
+		dmas = <0>, <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx0_default>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+
+		eeprom@53 {
+			compatible = "atmel,24c02";
+			reg = <0x53>;
+			pagesize = <16>;
+		};
+	};
+};
+
+&flx6 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c6: i2c@600 {
+		dmas = <0>, <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx6_default>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "disabled";
+	};
+};
+
+&flx7 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart7: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx7_default>;
+		status = "okay";
+	};
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_macb0_rmii>;
+	status = "okay";
+
+	ethernet-phy@0 {
+		reg = <0x0>;
+		interrupt-parent = <&pioB>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&pinctrl {
+	adc {
+		pinctrl_adc_default: adc-default {
+			atmel,pins = <AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_adtrg_default: adtrg-default {
+			atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	can0 {
+		pinctrl_can0_rx_tx: can0-rx-tx {
+			atmel,pins =
+				<AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX0 */
+				 AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANTX0 */
+				 AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN>;	/* Enable CAN Transceivers */
+		};
+	};
+
+	can1 {
+		pinctrl_can1_rx_tx: can1-rx-tx {
+			atmel,pins =
+				<AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX1 */
+				 AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANTX1 */
+				 AT91_PIOB 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN>;	/* Enable CAN Transceivers */
+		};
+	};
+
+	dbgu {
+		pinctrl_dbgu: dbgu-0 {
+			atmel,pins = <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				      AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+	};
+
+	ebi {
+		pinctrl_ebi_data_lsb: ebi-data-lsb {
+			atmel,pins =
+				<AT91_PIOD 6 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 7 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 8 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 9 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 10 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 11 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 12 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 13 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+
+		pinctrl_ebi_addr_nand: ebi-addr-nand {
+			atmel,pins =
+				<AT91_PIOD 2 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 3 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+	};
+
+	flexcom {
+		pinctrl_flx0_default: flx0-twi {
+			atmel,pins =
+				<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_flx6_default: flx6-twi {
+			atmel,pins =
+				<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_flx7_default: flx7-usart {
+			atmel,pins =
+				<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE
+				 AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+		};
+	};
+
+	gpio-keys {
+		pinctrl_key_gpio_default: pinctrl-key-gpio {
+			atmel,pins = <AT91_PIOA 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	leds {
+		pinctrl_gpio_leds: gpio-leds {
+			atmel,pins = <AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOD 19 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	macb0 {
+		pinctrl_macb0_rmii: macb0-rmii-0 {
+			atmel,pins =
+				<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A */
+				 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A */
+				 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB2 periph A */
+				 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB3 periph A */
+				 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A */
+				 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A */
+				 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
+				 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
+				 AT91_PIOB 8 AT91_PERIPH_GPIO AT91_PINCTRL_NONE	/* PB8 IRQ GPIO */
+				 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
+				 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A */
+		};
+	};
+
+	nand {
+		pinctrl_nand_oe_we: nand-oe-we-0 {
+			atmel,pins =
+				<AT91_PIOD 0 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 1 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+
+		pinctrl_nand_rb: nand-rb-0 {
+			atmel,pins =
+				<AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_nand_cs: nand-cs-0 {
+			atmel,pins =
+				<AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	pwm0 {
+		pinctrl_pwm0_0: pwm0-0 {
+			atmel,pins = <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_pwm0_1: pwm0-1 {
+			atmel,pins = <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_pwm0_2: pwm0-2 {
+			atmel,pins = <AT91_PIOD 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+	};
+
+	sdmmc0 {
+		pinctrl_sdmmc0_default: sdmmc0 {
+			atmel,pins =
+				<AT91_PIOA 17 AT91_PERIPH_A (AT91_PINCTRL_DRIVE_STRENGTH_HI)				/* PA17 CK  periph A with pullup */
+				 AT91_PIOA 16 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA16 CMD periph A with pullup */
+				 AT91_PIOA 15 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA15 DAT0 periph A */
+				 AT91_PIOA 18 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA18 DAT1 periph A with pullup */
+				 AT91_PIOA 19 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA19 DAT2 periph A with pullup */
+				 AT91_PIOA 20 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>;	/* PA20 DAT3 periph A with pullup */
+		};
+
+		pinctrl_sdmmc0_cd: sdmmc0-cd {
+			atmel,pins =
+				<AT91_PIOA 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	sdmmc1 {
+		pinctrl_sdmmc1_default: sdmmc1 {
+			atmel,pins =
+				<AT91_PIOA 13 AT91_PERIPH_B (AT91_PINCTRL_DRIVE_STRENGTH_HI)				/* PA13 CK periph B */
+				 AT91_PIOA 12 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA12 CMD periph B with pullup */
+				 AT91_PIOA 11 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA11 DAT0 periph B with pullup */
+				 AT91_PIOA 2 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA2 DAT1 periph B with pullup */
+				 AT91_PIOA 3 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA3 DAT2 periph B with pullup */
+				 AT91_PIOA 4 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>;	/* PA4 DAT3 periph B with pullup */
+		};
+	};
+
+	usb0 {
+		pinctrl_usba_vbus: usba-vbus {
+			atmel,pins = <AT91_PIOA 27 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	usb1 {
+		pinctrl_usb_default: usb-default {
+			atmel,pins = <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+}; /* pinctrl */
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_0 &pinctrl_pwm0_1 &pinctrl_pwm0_2>;
+	status = "okay";
+};
+
+&rtt {
+	atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default &pinctrl_sdmmc0_cd>;
+	cd-gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	status = "okay";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc1_default>;
+	disable-wp;
+	status = "okay";
+};
+
+&shutdown_controller {
+	debounce-delay-us = <976>;
+	status = "okay";
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&usb0 {
+	atmel,vbus-gpio = <&pioA 27 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	status = "okay";
+};
+
+&usb1 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <0
+			   &pioD 18 GPIO_ACTIVE_HIGH
+			   &pioD 15 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_default>;
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts
index b1068cca4228..c1ff3248bd8f 100644
--- a/arch/arm/boot/dts/at91-sam9x60ek.dts
+++ b/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts
@@ -16,8 +16,8 @@
 
 	aliases {
 		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		serial1 = &uart1;
+		i2c1 = &i2c6;
+		serial1 = &uart5;
 	};
 
 	chosen {
@@ -34,58 +34,15 @@
 		};
 	};
 
-	regulators: regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdd_1v8: fixed-regulator-vdd_1v8@0 {
-			compatible = "regulator-fixed";
-			regulator-name = "VDD_1V8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-			status = "okay";
-		};
-
-		vdd_1v5: fixed-regulator-vdd_1v5@1 {
-			compatible = "regulator-fixed";
-			regulator-name = "VDD_1V5";
-			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <1500000>;
-			regulator-always-on;
-			status = "okay";
-		};
-
-		vdd1_3v3: fixed-regulator-vdd1_3v3@2 {
-			compatible = "regulator-fixed";
-			regulator-name = "VDD1_3V3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			status = "okay";
-		};
-
-		vdd2_3v3: regulator-fixed-vdd2_3v3@3 {
-			compatible = "regulator-fixed";
-			regulator-name = "VDD2_3V3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			status = "okay";
-		};
-	};
-
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_key_gpio_default>;
-		status = "okay";
 
-		sw1 {
+		button-1 {
 			label = "SW1";
 			gpios = <&pioD 18 GPIO_ACTIVE_LOW>;
-			linux,code=<KEY_PROG1>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};
@@ -96,22 +53,54 @@
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 		status = "okay"; /* Conflict with pwm0. */
 
-		red {
+		led-red {
 			label = "red";
 			gpios = <&pioB 11 GPIO_ACTIVE_HIGH>;
 		};
 
-		green {
+		led-green {
 			label = "green";
 			gpios = <&pioB 12 GPIO_ACTIVE_HIGH>;
 		};
 
-		blue {
+		led-blue {
 			label = "blue";
 			gpios = <&pioB 13 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
+
+	vdd_1v8: fixed-regulator-vdd_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vdd_1v15: fixed-regulator-vdd_1v15 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-always-on;
+	};
+
+	vdd1_3v3: fixed-regulator-vdd1_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD1_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vdd2_3v3: regulator-fixed-vdd2_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD2_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 };
 
 &adc {
@@ -218,25 +207,18 @@
 	status = "okay";
 
 	i2c0: i2c@600 {
-		compatible = "microchip,sam9x60-i2c";
-		reg = <0x600 0x200>;
-		interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+		dmas = <0>, <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_flx0_default>;
-		atmel,fifo-size = <16>;
 		i2c-analog-filter;
 		i2c-digital-filter;
 		i2c-digital-filter-width-ns = <35>;
 		status = "okay";
 
 		eeprom@53 {
-			compatible = "atmel,24c32";
+			compatible = "atmel,24c02";
 			reg = <0x53>;
 			pagesize = <16>;
-			size = <128>;
 			status = "okay";
 		};
 	};
@@ -246,17 +228,10 @@
 	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
 	status = "disabled";
 
-	spi0: spi@400 {
-		compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
-		reg = <0x400 0x200>;
-		interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
-		clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
-		clock-names = "spi_clk";
+	spi4: spi@400 {
+		dmas = <0>, <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_flx4_default>;
-		atmel,fifo-size = <16>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 		status = "disabled";
 	};
 };
@@ -265,23 +240,9 @@
 	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
 	status = "okay";
 
-	uart1: serial@200 {
-		compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
-		reg = <0x200 0x200>;
-		interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
-		dmas = <&dma0
-			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
-			 AT91_XDMAC_DT_PERID(10))>,
-		       <&dma0
-			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
-			 AT91_XDMAC_DT_PERID(11))>;
-		dma-names = "tx", "rx";
-		clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
-		clock-names = "usart";
-		pinctrl-0 = <&pinctrl_flx5_default>;
+	uart5: serial@200 {
 		pinctrl-names = "default";
-		atmel,use-dma-rx;
-		atmel,use-dma-tx;
+		pinctrl-0 = <&pinctrl_flx5_default>;
 		status = "okay";
 	};
 };
@@ -290,21 +251,46 @@
 	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
 	status = "okay";
 
-	i2c1: i2c@600 {
-		compatible = "microchip,sam9x60-i2c";
-		reg = <0x600 0x200>;
-		interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+	i2c6: i2c@600 {
+		dmas = <0>, <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_flx6_default>;
-		atmel,fifo-size = <16>;
 		i2c-analog-filter;
 		i2c-digital-filter;
 		i2c-digital-filter-width-ns = <35>;
 		status = "okay";
 
+		power-monitor@17 {
+			compatible = "microchip,pac1934";
+			reg = <0x17>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@1 {
+				reg = <0x1>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDDIOM";
+			};
+
+			channel@2 {
+				reg = <0x2>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDDCORE";
+			};
+
+			channel@3 {
+				reg = <0x3>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDD3V3_MPU";
+			};
+
+			channel@4 {
+				reg = <0x4>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDD3V3";
+			};
+		};
+
 		gpio_exp: mcp23008@20 {
 			compatible = "microchip,mcp23008";
 			reg = <0x20>;
@@ -333,6 +319,8 @@
 
 	ethernet-phy@0 {
 		reg = <0x0>;
+		interrupt-parent = <&pioB>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
@@ -450,7 +438,7 @@
 				 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 		};
 
-		pinctrl_flx5_default: flx_uart {
+		pinctrl_flx5_default: flx5_uart {
 			atmel,pins =
 				<AT91_PIOA 7 AT91_PERIPH_C AT91_PINCTRL_NONE
 				 AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE
@@ -506,6 +494,7 @@
 				 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A */
 				 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
 				 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
+				 AT91_PIOB 8 AT91_PERIPH_GPIO AT91_PINCTRL_NONE	/* PB8 IRQ GPIO */
 				 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
 				 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A */
 		};
@@ -619,7 +608,8 @@
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		spi-max-frequency = <80000000>;
+		spi-max-frequency = <104000000>;
+		spi-cs-setup-delay-ns = <7>;
 		spi-tx-bus-width = <4>;
 		spi-rx-bus-width = <4>;
 		m25p,fast-read;
diff --git a/arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts
new file mode 100644
index 000000000000..1a6a909a5043
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts
@@ -0,0 +1,374 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sam9x75_curiosity.dts - Device Tree file for Microchip SAM9X75 Curiosity board
+ *
+ * Copyright (C) 2023 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Varshini Rajendran <varshini.rajendran@microchip.com>
+ */
+/dts-v1/;
+#include "sam9x7.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Microchip SAM9X75 Curiosity";
+	compatible = "microchip,sam9x75-curiosity", "microchip,sam9x7", "atmel,at91sam9";
+
+	aliases {
+		i2c0 = &i2c6;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button-user {
+			label = "USER";
+			gpios = <&pioC 9 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_0>;
+			wakeup-source;
+		};
+	};
+
+	led-controller {
+		compatible = "gpio-leds";
+
+		led_red: led-red {
+			label = "red";
+			gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+			pinctrl-0 = <&pinctrl_red_led_gpio_default>;
+		};
+
+		led_green: led-green {
+			label = "green";
+			gpios = <&pioC 21 GPIO_ACTIVE_HIGH>;
+			pinctrl-0 = <&pinctrl_green_led_gpio_default>;
+		};
+
+		led_blue: led-blue {
+			label = "blue";
+			gpios = <&pioC 20 GPIO_ACTIVE_HIGH>;
+			pinctrl-0 = <&pinctrl_blue_led_gpio_default>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x10000000>;
+		device_type = "memory";
+	};
+};
+
+&classd {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_classd_default>;
+	atmel,pwm-type = "diff";
+	atmel,non-overlap-time = <10>;
+	status = "okay";
+};
+
+&dbgu {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dbgu_default>;
+	status = "okay";
+};
+
+&dma0 {
+	status = "okay";
+};
+
+&flx6 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+};
+
+&i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flx6_default>;
+	i2c-analog-filter;
+	i2c-digital-filter;
+	i2c-digital-filter-width-ns = <35>;
+	status = "okay";
+
+	pmic@5b {
+		compatible = "microchip,mcp16502";
+		reg = <0x5b>;
+
+		regulators {
+			vdd_3v3: VDD_IO {
+				regulator-name = "VDD_IO";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-mode = <4>;
+				};
+			};
+
+			vddioddr: VDD_DDR {
+				regulator-name = "VDD_DDR";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vddcore: VDD_CORE {
+				regulator-name = "VDD_CORE";
+				regulator-min-microvolt = <1150000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-mode = <4>;
+				};
+			};
+
+			dcdc4: VDD_OTHER {
+				regulator-name = "VDD_OTHER";
+				regulator-min-microvolt = <1150000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-ramp-delay = <3125>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-mode = <4>;
+				};
+			};
+
+			vldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vldo2: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&flx7 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+};
+
+&i2c7 {
+	dmas = <0>, <0>;
+	i2c-analog-filter;
+	i2c-digital-filter;
+	i2c-digital-filter-width-ns = <35>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flx7_default>;
+	status = "okay";
+
+	power-monitor@10 {
+		compatible = "microchip,pac1934";
+		reg = <0x10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@1 {
+			reg = <0x1>;
+			shunt-resistor-micro-ohms = <10000>;
+			label = "VDD3V3";
+		};
+
+		channel@2 {
+			reg = <0x2>;
+			shunt-resistor-micro-ohms = <10000>;
+			label = "DCDC4";
+		};
+
+		channel@3 {
+			reg = <0x3>;
+			shunt-resistor-micro-ohms = <10000>;
+			label = "VDDCORE";
+		};
+
+		channel@4 {
+			reg = <0x4>;
+			shunt-resistor-micro-ohms = <10000>;
+			label = "VDDIODDR";
+		};
+	};
+};
+
+&i2s {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2s_default>;
+	#sound-dai-cells = <0>;
+	status = "okay";
+};
+
+&main_xtal {
+	clock-frequency = <24000000>;
+};
+
+&pinctrl {
+	classd {
+		pinctrl_classd_default: classd-default {
+			atmel,pins =
+				<AT91_PIOA 18 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>,
+				<AT91_PIOA 19 AT91_PERIPH_C AT91_PINCTRL_PULL_DOWN>;
+		};
+	};
+
+	dbgu {
+		pinctrl_dbgu_default: dbgu-default {
+			atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+				     <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+	};
+
+	flexcom {
+		pinctrl_flx6_default: flx6-default {
+			atmel,pins =
+				<AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+				<AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_flx7_default: flx7-default {
+			atmel,pins =
+				<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>,
+				<AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	gpio-keys {
+		pinctrl_key_gpio_default: key-gpio-default {
+			atmel,pins = <AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	i2s {
+		pinctrl_i2s_default: i2s-default {
+			atmel,pins =
+				<AT91_PIOB 26 AT91_PERIPH_D AT91_PINCTRL_NONE>,		/* I2SCK */
+				<AT91_PIOB 15 AT91_PERIPH_D AT91_PINCTRL_NONE>,		/* I2SWS */
+				<AT91_PIOB 16 AT91_PERIPH_D AT91_PINCTRL_NONE>,		/* I2SDIN */
+				<AT91_PIOB 17 AT91_PERIPH_D AT91_PINCTRL_NONE>,		/* I2SDOUT */
+				<AT91_PIOB 25 AT91_PERIPH_D AT91_PINCTRL_NONE>;		/* I2SMCK */
+		};
+	};
+
+	led-controller {
+		pinctrl_red_led_gpio_default: red-led-gpio-default {
+			atmel,pins = <AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+		pinctrl_green_led_gpio_default: green-led-gpio-default {
+			atmel,pins = <AT91_PIOC 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+		pinctrl_blue_led_gpio_default: blue-led-gpio-default {
+			atmel,pins = <AT91_PIOC 20 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	sdmmc0 {
+		pinctrl_sdmmc0_default: sdmmc0-default {
+			atmel,pins =
+				<AT91_PIOA 2 AT91_PERIPH_A (AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>,				/* PA2 CK  periph A with pullup */
+				<AT91_PIOA 1 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>,	/* PA1 CMD periph A with pullup */
+				<AT91_PIOA 0 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>,	/* PA0 DAT0 periph A */
+				<AT91_PIOA 3 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>,	/* PA3 DAT1 periph A with pullup */
+				<AT91_PIOA 4 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>,	/* PA4 DAT2 periph A with pullup */
+				<AT91_PIOA 5 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>;	/* PA5 DAT3 periph A with pullup */
+		};
+	};
+}; /* pinctrl */
+
+&poweroff {
+	debounce-delay-us = <976>;
+	status = "okay";
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&rtt {
+	atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default>;
+	cd-gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	status = "okay";
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
+&tcb {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&trng {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/microchip/at91-sama5d27_som1.dtsi
index b48ac3b62a31..13c28e92b17e 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
+++ b/arch/arm/boot/dts/microchip/at91-sama5d27_som1.dtsi
@@ -8,13 +8,14 @@
  */
 #include "sama5d2.dtsi"
 #include "sama5d2-pinfunc.h"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Atmel SAMA5D27 SoM1";
 	compatible = "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
 
 	aliases {
-		i2c0	= &i2c0;
+		i2c0 = &i2c0;
 	};
 
 	clocks {
@@ -42,7 +43,8 @@
 					#size-cells = <1>;
 					compatible = "jedec,spi-nor";
 					reg = <0>;
-					spi-max-frequency = <80000000>;
+					spi-max-frequency = <104000000>;
+					spi-cs-setup-delay-ns = <7>;
 					spi-tx-bus-width = <4>;
 					spi-rx-bus-width = <4>;
 					m25p,fast-read;
@@ -82,6 +84,8 @@
 			macb0: ethernet@f8008000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb0_default>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				phy-mode = "rmii";
 
 				ethernet-phy@7 {
@@ -95,11 +99,14 @@
 
 			i2c0: i2c@f8028000 {
 				dmas = <0>, <0>;
-				pinctrl-names = "default";
+				pinctrl-names = "default", "gpio";
 				pinctrl-0 = <&pinctrl_i2c0_default>;
+				pinctrl-1 = <&pinctrl_i2c0_gpio>;
+				sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 				status = "okay";
 
-				at24@50 {
+				eeprom@50 {
 					compatible = "atmel,24c02";
 					reg = <0x50>;
 					pagesize = <8>;
@@ -113,6 +120,12 @@
 					bias-disable;
 				};
 
+				pinctrl_i2c0_gpio: i2c0_gpio {
+					pinmux = <PIN_PD21__GPIO>,
+						 <PIN_PD22__GPIO>;
+					bias-disable;
+				};
+
 				pinctrl_qspi1_default: qspi1_default {
 					sck_cs {
 						pinmux = <PIN_PB5__QSPI1_SCK>,
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts
index cd4672501add..45edf6214cf7 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts
@@ -21,8 +21,8 @@
 		serial0 = &uart1;	/* DBGU */
 		serial1 = &uart4;	/* mikro BUS 1 */
 		serial2 = &uart2;	/* mikro BUS 2 */
-		i2c1	= &i2c1;
-		i2c2	= &i2c3;
+		i2c1 = &i2c1;
+		i2c2 = &i2c3;
 	};
 
 	chosen {
@@ -37,7 +37,7 @@
 			status = "okay";
 		};
 
-		usb1: ohci@400000 {
+		usb1: usb@400000 {
 			num-ports = <3>;
 			atmel,vbus-gpio = <0 /* &pioA PIN_PD20 GPIO_ACTIVE_HIGH */
 					   &pioA PIN_PA27 GPIO_ACTIVE_HIGH
@@ -48,13 +48,12 @@
 			status = "okay";
 		};
 
-		usb2: ehci@500000 {
+		usb2: usb@500000 {
 			status = "okay";
 		};
 
 		sdmmc0: sdio-host@a0000000 {
 			bus-width = <8>;
-			mmc-ddr-3_3v;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_sdmmc0_default>;
 			status = "okay";
@@ -130,13 +129,16 @@
 					i2c-analog-filter;
 					i2c-digital-filter;
 					i2c-digital-filter-width-ns = <35>;
-					pinctrl-names = "default";
+					pinctrl-names = "default", "gpio";
 					pinctrl-0 = <&pinctrl_mikrobus_i2c>;
+					pinctrl-1 = <&pinctrl_i2c3_gpio>;
+					sda-gpios = <&pioA PIN_PA24 GPIO_ACTIVE_HIGH>;
+					scl-gpios = <&pioA PIN_PA23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 					status = "okay";
 				};
 			};
 
-			shdwc@f8048010 {
+			poweroff@f8048010 {
 				debounce-delay-us = <976>;
 				atmel,wakeup-rtc-timer;
 
@@ -215,8 +217,11 @@
 				i2c-analog-filter;
 				i2c-digital-filter;
 				i2c-digital-filter-width-ns = <35>;
-				pinctrl-names = "default";
+				pinctrl-names = "default", "gpio";
 				pinctrl-0 = <&pinctrl_i2c1_default>;
+				pinctrl-1 = <&pinctrl_i2c1_gpio>;
+				sda-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA PIN_PD5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 				status = "okay";
 			};
 
@@ -252,6 +257,13 @@
 					bias-disable;
 				};
 
+				pinctrl_i2c1_gpio: i2c1_gpio {
+                                        pinmux = <PIN_PD4__GPIO>,
+                                                 <PIN_PD5__GPIO>;
+                                        bias-disable;
+                                };
+
+
 				pinctrl_isc_base: isc_base {
 					pinmux = <PIN_PC21__ISC_PCK>,
 						 <PIN_PC22__ISC_VSYNC>,
@@ -441,6 +453,12 @@
 					bias-disable;
 				};
 
+				pinctrl_i2c3_gpio: i2c3_gpio {
+					pinmux = <PIN_PA24__GPIO>,
+						 <PIN_PA23__GPIO>;
+					bias-disable;
+				};
+
 				pinctrl_flx4_default: flx4_uart_default {
 					pinmux = <PIN_PC28__FLEXCOM4_IO0>,
 						 <PIN_PC29__FLEXCOM4_IO1>,
@@ -459,13 +477,13 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_key_gpio_default>;
 
-		pb4 {
+		button {
 			label = "USER";
 			gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_PROG1>;
@@ -479,17 +497,17 @@
 		pinctrl-0 = <&pinctrl_led_gpio_default>;
 		status = "okay"; /* Conflict with pwm0. */
 
-		red {
+		led-red {
 			label = "red";
 			gpios = <&pioA PIN_PA10 GPIO_ACTIVE_HIGH>;
 		};
 
-		green {
+		led-green {
 			label = "green";
 			gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>;
 		};
 
-		blue {
+		led-blue {
 			label = "blue";
 			gpios = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi
new file mode 100644
index 000000000000..0417f53b3e96
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi
@@ -0,0 +1,399 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d27_wlsom1.dtsi - Device Tree file for SAMA5D27 WLSOM1
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Nicolas Ferre <nicolas.ferre@microcihp.com>
+ * Author: Eugen Hristev <eugen.hristev@microcihp.com>
+ */
+#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/pinctrl/at91.h>
+
+/ {
+	model = "Microchip SAMA5D27 WLSOM1";
+	compatible = "microchip,sama5d27-wlsom1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		i2c0 = &i2c0;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <24000000>;
+		};
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_MAIN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-wilc1000";
+		reset-gpios = <&pioA PIN_PA27 GPIO_ACTIVE_HIGH>;
+		powerdown-gpios = <&pioA PIN_PA29 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&pinctrl_wilc_pwrseq>;
+		pinctrl-names = "default";
+	};
+};
+
+&flx1 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+
+	uart6: serial@200 {
+		pinctrl-0 = <&pinctrl_flx1_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&i2c0 {
+	pinctrl-0 = <&pinctrl_i2c0_default>;
+	pinctrl-1 = <&pinctrl_i2c0_gpio>;
+	pinctrl-names = "default", "gpio";
+	sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c1 {
+	dmas = <0>, <0>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	sda-gpios = <&pioA PIN_PD19 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&pioA PIN_PD20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic@5b {
+		compatible = "microchip,mcp16502";
+		reg = <0x5b>;
+		lvin-supply = <&reg_5v>;
+		pvin1-supply = <&reg_5v>;
+		pvin2-supply = <&reg_5v>;
+		pvin3-supply = <&reg_5v>;
+		pvin4-supply = <&reg_5v>;
+		status = "okay";
+		lpm-gpios = <&pioBU 0 GPIO_ACTIVE_LOW>;
+
+		regulators {
+			vdd_3v3: VDD_IO {
+				regulator-name = "VDD_IO";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vddio_ddr: VDD_DDR {
+				regulator-name = "VDD_DDR";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1200000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1200000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vdd_core: VDD_CORE {
+				regulator-name = "VDD_CORE";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vdd_ddr: VDD_OTHER {
+				regulator-name = "VDD_OTHER";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&macb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_macb0_default>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	phy-mode = "rmii";
+
+	ethernet-phy@0 {
+		reg = <0x0>;
+		interrupt-parent = <&pioA>;
+		interrupts = <PIN_PB24 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_macb0_phy_irq>;
+	};
+};
+
+&pmc {
+	atmel,osc-bypass;
+};
+
+&qspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi1_default>;
+	status = "disabled";
+
+	qspi1_flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+		spi-cs-setup-delay-ns = <7>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		m25p,fast-read;
+		status = "disabled";
+
+		at91bootstrap@0 {
+			label = "at91bootstrap";
+			reg = <0x0 0x40000>;
+		};
+
+		bootloader@40000 {
+			label = "bootloader";
+			reg = <0x40000 0xc0000>;
+		};
+
+		bootloaderenvred@100000 {
+			label = "bootloader env redundant";
+			reg = <0x100000 0x40000>;
+		};
+
+		bootloaderenv@140000 {
+			label = "bootloader env";
+			reg = <0x140000 0x40000>;
+		};
+
+		dtb@180000 {
+			label = "device tree";
+			reg = <0x180000 0x80000>;
+		};
+
+		kernel@200000 {
+			label = "kernel";
+			reg = <0x200000 0x600000>;
+		};
+	};
+};
+
+&pioA {
+	pinctrl_flx1_default: flx1_usart_default {
+		pinmux = <PIN_PA24__FLEXCOM1_IO0>,
+			 <PIN_PA23__FLEXCOM1_IO1>,
+			 <PIN_PA25__FLEXCOM1_IO3>,
+			 <PIN_PA26__FLEXCOM1_IO4>;
+		bias-disable;
+	};
+
+	pinctrl_i2c0_default: i2c0_default {
+		pinmux = <PIN_PD21__TWD0>,
+			 <PIN_PD22__TWCK0>;
+		bias-disable;
+	};
+
+	pinctrl_i2c0_gpio: i2c0_gpio {
+		pinmux = <PIN_PD21__GPIO>,
+			 <PIN_PD22__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_i2c1_default: i2c1_default {
+		pinmux = <PIN_PD19__TWD1>,
+			 <PIN_PD20__TWCK1>;
+		bias-disable;
+	};
+
+	pinctrl_i2c1_gpio: i2c1_gpio {
+		pinmux = <PIN_PD19__GPIO>,
+			 <PIN_PD20__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_macb0_default: macb0_default {
+		pinmux = <PIN_PB14__GTXCK>,
+			 <PIN_PB15__GTXEN>,
+			 <PIN_PB16__GRXDV>,
+			 <PIN_PB17__GRXER>,
+			 <PIN_PB18__GRX0>,
+			 <PIN_PB19__GRX1>,
+			 <PIN_PB20__GTX0>,
+			 <PIN_PB21__GTX1>,
+			 <PIN_PB22__GMDC>,
+			 <PIN_PB23__GMDIO>;
+		bias-disable;
+	};
+
+	pinctrl_macb0_phy_irq: macb0_phy_irq {
+		pinmux = <PIN_PB24__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_qspi1_default: qspi1_default {
+		pinmux = <PIN_PB5__QSPI1_SCK>,
+			 <PIN_PB6__QSPI1_CS>,
+			 <PIN_PB7__QSPI1_IO0>,
+			 <PIN_PB8__QSPI1_IO1>,
+			 <PIN_PB9__QSPI1_IO2>,
+			 <PIN_PB10__QSPI1_IO3>;
+		bias-pull-up;
+	};
+
+	pinctrl_sdmmc1_default: sdmmc1_default {
+		cmd-data {
+			pinmux = <PIN_PA28__SDMMC1_CMD>,
+				 <PIN_PA18__SDMMC1_DAT0>,
+				 <PIN_PA19__SDMMC1_DAT1>,
+				 <PIN_PA20__SDMMC1_DAT2>,
+				 <PIN_PA21__SDMMC1_DAT3>;
+			bias-disable;
+		};
+
+		conf-ck {
+			pinmux = <PIN_PA22__SDMMC1_CK>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_wilc_default: wilc_default {
+		conf-irq {
+			pinmux = <PIN_PB25__GPIO>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_wilc_pwrseq: wilc_pwrseq {
+		conf-ce-nrst {
+			pinmux = <PIN_PA27__GPIO>,
+				 <PIN_PA29__GPIO>;
+			bias-disable;
+		};
+
+		conf-rtcclk {
+			pinmux = <PIN_PB13__PCK1>;
+			bias-disable;
+		};
+	};
+};
+
+&sdmmc1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc1_default>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	no-1-8-v;
+	non-removable;
+	bus-width = <4>;
+	status = "okay";
+
+	wilc: wifi@0 {
+		reg = <0>;
+		compatible = "microchip,wilc3000", "microchip,wilc1000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wilc_default>;
+		clocks = <&pmc PMC_TYPE_SYSTEM 9>;
+		clock-names = "rtc";
+		interrupts = <PIN_PB25 IRQ_TYPE_NONE>;
+		interrupt-parent = <&pioA>;
+		assigned-clocks = <&pmc PMC_TYPE_SYSTEM 9>;
+		assigned-clock-rates = <32768>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts
index c145c4e5ef58..35a933eec573 100644
--- a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts
@@ -19,21 +19,20 @@
 		serial1 = &uart6;	/* BT */
 		serial2 = &uart5;	/* mikro BUS 2 */
 		serial3 = &uart3;	/* mikro BUS 1 */
-		i2c1	= &i2c1;
+		i2c1 = &i2c1;
 	};
 
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_key_gpio_default>;
-		status = "okay";
 
-		sw4 {
+		button-1 {
 			label = "USER BUTTON";
 			gpios = <&pioA PIN_PB2 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_PROG1>;
@@ -47,17 +46,17 @@
 		pinctrl-0 = <&pinctrl_led_gpio_default>;
 		status = "okay";
 
-		red {
+		led-red {
 			label = "red";
 			gpios = <&pioA PIN_PA6 GPIO_ACTIVE_HIGH>;
 		};
 
-		green {
+		led-green {
 			label = "green";
 			gpios = <&pioA PIN_PA7 GPIO_ACTIVE_HIGH>;
 		};
 
-		blue {
+		led-blue {
 			label = "blue";
 			gpios = <&pioA PIN_PA8 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
@@ -191,14 +190,14 @@
 &qspi1 {
 	status = "okay";
 
-	qspi1_flash: spi_flash@0 {
+	qspi1_flash: flash@0 {
 		status = "okay";
 	};
 };
 
 &sdmmc0 {
 	bus-width = <4>;
-	mmc-ddr-3_3v;
+	no-1-8-v;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sdmmc0_default>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts
new file mode 100644
index 000000000000..7be215781549
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts
@@ -0,0 +1,614 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d29_curiosity.dts - Device Tree file for SAMA5D29 Curiosity board
+ *
+ * Copyright (C) 2023 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Mihai Sain <mihai.sain@microchip.com>
+ *
+ */
+/dts-v1/;
+#include "sama5d29.dtsi"
+#include "sama5d2-pinfunc.h"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+
+/ {
+	model = "Microchip SAMA5D29 Curiosity";
+	compatible = "microchip,sama5d29-curiosity", "atmel,sama5d29", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		serial0 = &uart0;	// debug
+		serial1 = &uart1;	// RPi
+		serial2 = &uart3;	// mikro BUS 2
+		serial3 = &uart4;	// mikro BUS 1
+		serial4 = &uart6;	// flx1 Bluetooth
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait";
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <24000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button-1 {
+			label = "USER BUTTON";
+			gpios = <&pioA PIN_PA17 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+		status = "okay";
+
+		led-red {
+			label = "red";
+			gpios = <&pioA PIN_PA7 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-green {
+			label = "green";
+			gpios = <&pioA PIN_PA8 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-blue {
+			label = "blue";
+			gpios = <&pioA PIN_PA9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x20000000>;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_MAIN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&adc {
+	vddana-supply = <&vdd_3v3>;
+	vref-supply = <&vdd_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0_default>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_default>;
+	status = "okay";
+};
+
+&flx1 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart6: serial@200 {
+		pinctrl-0 = <&pinctrl_flx1_default>;
+		pinctrl-names = "default";
+		atmel,use-dma-rx;
+		atmel,use-dma-tx;
+		status = "okay";
+	};
+};
+
+&flx4 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+	status = "okay";
+
+	spi6: spi@400 {
+		dmas = <0>, <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rpi_spi>;
+		status = "okay";
+	};
+};
+
+&i2c0 {
+	dmas = <0>, <0>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c0_default>;
+	pinctrl-1 = <&pinctrl_i2c0_gpio>;
+	sda-gpios = <&pioA PIN_PB31 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&pioA PIN_PC0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	i2c-sda-hold-time-ns = <350>;
+	status = "okay";
+
+	pmic@5b {
+		compatible = "microchip,mcp16502";
+		reg = <0x5b>;
+		lvin-supply = <&reg_5v>;
+		pvin1-supply = <&reg_5v>;
+		pvin2-supply = <&reg_5v>;
+		pvin3-supply = <&reg_5v>;
+		pvin4-supply = <&reg_5v>;
+		status = "okay";
+		lpm-gpios = <&pioBU 0 GPIO_ACTIVE_LOW>;
+
+		regulators {
+			vdd_3v3: VDD_IO {
+				regulator-name = "VDD_IO";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vddio_ddr: VDD_DDR {
+				regulator-name = "VDD_DDR";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1200000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1200000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vdd_core: VDD_CORE {
+				regulator-name = "VDD_CORE";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vdd_ddr: VDD_OTHER {
+				regulator-name = "VDD_OTHER";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	dmas = <0>, <0>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	i2c-analog-filter;
+	i2c-digital-filter;
+	i2c-digital-filter-width-ns = <35>;
+	sda-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&pioA PIN_PD5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&pioA {
+	pinctrl_adc_default: adc-default {
+		pinmux = <PIN_PD25__GPIO>,
+			 <PIN_PD26__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_adtrg_default: adtrg-default {
+		pinmux = <PIN_PD31__ADTRG>;
+		bias-pull-up;
+	};
+
+	pinctrl_can0_default: can0-default {
+		pinmux = <PIN_PC10__CANTX0>,
+			 <PIN_PC11__CANRX0>;
+		bias-disable;
+	};
+
+	pinctrl_can1_default: can1-default {
+		pinmux = <PIN_PC26__CANTX1>,
+			 <PIN_PC27__CANRX1>;
+		bias-disable;
+	};
+
+	pinctrl_debug_uart: debug-uart {
+		pinmux = <PIN_PB26__URXD0>,
+			 <PIN_PB27__UTXD0>;
+		bias-disable;
+	};
+
+	pinctrl_flx1_default: flx1-default {
+		pinmux = <PIN_PA24__FLEXCOM1_IO0>,
+			 <PIN_PA23__FLEXCOM1_IO1>,
+			 <PIN_PA25__FLEXCOM1_IO3>,
+			 <PIN_PA26__FLEXCOM1_IO4>;
+		bias-disable;
+	};
+
+	pinctrl_i2c0_default: i2c0-default {
+		pinmux = <PIN_PB31__TWD0>,
+			 <PIN_PC0__TWCK0>;
+		bias-disable;
+	};
+
+	pinctrl_i2c0_gpio: i2c0-gpio-default {
+		pinmux = <PIN_PB31__GPIO>,
+			 <PIN_PC0__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_i2c1_default: i2c1-default {
+		pinmux = <PIN_PD4__TWD1>,
+			 <PIN_PD5__TWCK1>;
+		bias-disable;
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio-default {
+		pinmux = <PIN_PD4__GPIO>,
+			 <PIN_PD5__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_key_gpio_default: key-gpio-default {
+		pinmux = <PIN_PA17__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_led_gpio_default: led-gpio-default {
+		pinmux = <PIN_PA7__GPIO>,
+			 <PIN_PA8__GPIO>,
+			 <PIN_PA9__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_mikrobus1_pwm: mikrobus1-pwm {
+		pinmux = <PIN_PA31__PWML0>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_pwm: mikrobus2-pwm {
+		pinmux = <PIN_PB0__PWMH1>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_uart: mikrobus1-uart {
+		pinmux = <PIN_PB3__URXD4>,
+			 <PIN_PB4__UTXD4>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_uart: mikrobus2-uart {
+		pinmux = <PIN_PB11__URXD3>,
+			 <PIN_PB12__UTXD3>;
+		bias-disable;
+	};
+
+	pinctrl_qspi1_default: qspi1-default {
+		pinmux = <PIN_PB5__QSPI1_SCK>,
+			 <PIN_PB6__QSPI1_CS>,
+			 <PIN_PB7__QSPI1_IO0>,
+			 <PIN_PB8__QSPI1_IO1>,
+			 <PIN_PB9__QSPI1_IO2>,
+			 <PIN_PB10__QSPI1_IO3>;
+		bias-disable;
+	};
+
+	pinctrl_rpi_spi: rpi-spi {
+		pinmux = <PIN_PD12__FLEXCOM4_IO0>,
+			 <PIN_PD13__FLEXCOM4_IO1>,
+			 <PIN_PD14__FLEXCOM4_IO2>,
+			 <PIN_PD15__FLEXCOM4_IO3>,
+			 <PIN_PD16__FLEXCOM4_IO4>;
+		bias-disable;
+	};
+
+	pinctrl_rpi_uart: rpi-uart {
+		pinmux = <PIN_PD2__URXD1>,
+			 <PIN_PD3__UTXD1>;
+		bias-disable;
+	};
+
+	pinctrl_sdmmc0_default: sdmmc0-default {
+		pinmux = <PIN_PA0__SDMMC0_CK>,
+			 <PIN_PA1__SDMMC0_CMD>,
+			 <PIN_PA2__SDMMC0_DAT0>,
+			 <PIN_PA3__SDMMC0_DAT1>,
+			 <PIN_PA4__SDMMC0_DAT2>,
+			 <PIN_PA5__SDMMC0_DAT3>,
+			 <PIN_PA11__SDMMC0_VDDSEL>,
+			 <PIN_PA13__SDMMC0_CD>;
+		bias-disable;
+	};
+
+	pinctrl_sdmmc1_default: sdmmc1-default {
+		pinmux = <PIN_PA18__SDMMC1_DAT0>,
+			 <PIN_PA19__SDMMC1_DAT1>,
+			 <PIN_PA20__SDMMC1_DAT2>,
+			 <PIN_PA21__SDMMC1_DAT3>,
+			 <PIN_PA22__SDMMC1_CK>,
+			 <PIN_PA28__SDMMC1_CMD>,
+			 <PIN_PA30__SDMMC1_CD>;
+		bias-disable;
+	};
+
+	pinctrl_spi1_default: spi1-default {
+		pinmux = <PIN_PC1__SPI1_SPCK>,
+			 <PIN_PC2__SPI1_MOSI>,
+			 <PIN_PC3__SPI1_MISO>,
+			 <PIN_PC4__SPI1_NPCS0>,
+			 <PIN_PC5__SPI1_NPCS1>,
+			 <PIN_PC6__SPI1_NPCS2>,
+			 <PIN_PC7__SPI1_NPCS3>;
+		bias-disable;
+	};
+
+	pinctrl_usb_default: usb-default {
+		pinmux = <PIN_PA6__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_usba_vbus: usba-vbus {
+		pinmux = <PIN_PB13__GPIO>;
+		bias-disable;
+	};
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus1_pwm &pinctrl_mikrobus2_pwm>;
+	status = "okay";
+};
+
+&qspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi1_default>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <80000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		m25p,fast-read;
+		label = "atmel_qspi1";
+		status = "okay";
+
+		at91bootstrap@0 {
+			label = "at91bootstrap";
+			reg = <0x0 0x40000>;
+		};
+
+		bootloader@40000 {
+			label = "bootloader";
+			reg = <0x40000 0xc0000>;
+		};
+
+		bootloaderenvred@100000 {
+			label = "bootloader env redundant";
+			reg = <0x100000 0x40000>;
+		};
+
+		bootloaderenv@140000 {
+			label = "bootloader env";
+			reg = <0x140000 0x40000>;
+		};
+
+		dtb@180000 {
+			label = "device tree";
+			reg = <0x180000 0x80000>;
+		};
+
+		kernel@200000 {
+			label = "kernel";
+			reg = <0x200000 0x600000>;
+		};
+	};
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	no-1-8-v;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default>;
+	disable-wp;
+	status = "okay";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc1_default>;
+	disable-wp;
+	status = "okay";
+};
+
+&shutdown_controller {
+	debounce-delay-us = <976>;
+	atmel,wakeup-rtc-timer;
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	status = "okay";
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_debug_uart>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rpi_uart>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus2_uart>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus1_uart>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&usb0 {
+	atmel,vbus-gpio = <&pioA PIN_PB13 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	status = "okay";
+};
+
+&usb1 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <0
+			   &pioA PIN_PA6 GPIO_ACTIVE_HIGH
+			   0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_default>;
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts
index e06b58724ca8..fbae6a9af6c3 100644
--- a/arch/arm/boot/dts/at91-sama5d2_icp.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts
@@ -24,8 +24,8 @@
 		serial1 = &uart1;	/* mikro BUS 3 */
 		serial3 = &uart3;	/* mikro BUS 2 */
 		serial5 = &uart7;	/* flx2 */
-		i2c0	= &i2c0;
-		i2c1	= &i2c1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
 	};
 
 	chosen {
@@ -42,14 +42,13 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_key_gpio_default>;
-		status = "okay";
 
-		sw4 {
+		button-1 {
 			label = "USER_PB1";
 			gpios = <&pioA PIN_PD0 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_PROG1>;
@@ -63,22 +62,30 @@
 		pinctrl-0 = <&pinctrl_led_gpio_default>;
 		status = "okay"; /* conflict with pwm0 */
 
-		red {
+		led-red {
 			label = "red";
 			gpios = <&pioA PIN_PB0 GPIO_ACTIVE_HIGH>;
 		};
 
-		green {
+		led-green {
 			label = "green";
 			gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>;
 		};
 
-		blue {
+		led-blue {
 			label = "blue";
 			gpios = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_MAIN_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
 };
 
 &adc {
@@ -188,17 +195,53 @@
 		i2c-digital-filter-width-ns = <35>;
 		status = "okay";
 
-		mcp16502@5b {
+		power-monitor@10 {
+			compatible = "microchip,pac1934";
+			reg = <0x10>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@1 {
+				reg = <0x1>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDD3V3_1";
+			};
+
+			channel@2 {
+				reg = <0x2>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDD3V3_2";
+			};
+
+			channel@3 {
+				reg = <0x3>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDDCORE";
+			};
+
+			channel@4 {
+				reg = <0x4>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDDIODDR";
+			};
+		};
+
+		pmic@5b {
 			compatible = "microchip,mcp16502";
 			reg = <0x5b>;
+			lvin-supply = <&reg_5v>;
+			pvin1-supply = <&reg_5v>;
+			pvin2-supply = <&reg_5v>;
+			pvin3-supply = <&reg_5v>;
+			pvin4-supply = <&reg_5v>;
 			status = "okay";
 			lpm-gpios = <&pioBU 7 GPIO_ACTIVE_LOW>;
 
 			regulators {
 				vdd_io_reg: VDD_IO {
 					regulator-name = "VDD_IO";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <3700000>;
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
 					regulator-always-on;
@@ -216,8 +259,8 @@
 
 				VDD_DDR {
 					regulator-name = "VDD_DDR";
-					regulator-min-microvolt = <600000>;
-					regulator-max-microvolt = <1850000>;
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
 					regulator-always-on;
@@ -235,8 +278,8 @@
 
 				VDD_CORE {
 					regulator-name = "VDD_CORE";
-					regulator-min-microvolt = <600000>;
-					regulator-max-microvolt = <1850000>;
+					regulator-min-microvolt = <1250000>;
+					regulator-max-microvolt = <1250000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
 					regulator-always-on;
@@ -258,7 +301,6 @@
 					regulator-max-microvolt = <1850000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
-					regulator-always-on;
 
 					regulator-state-standby {
 						regulator-on-in-suspend;
@@ -273,8 +315,8 @@
 
 				LDO1 {
 					regulator-name = "LDO1";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <3700000>;
+					regulator-min-microvolt = <2500000>;
+					regulator-max-microvolt = <2500000>;
 					regulator-always-on;
 
 					regulator-state-standby {
@@ -288,8 +330,8 @@
 
 				LDO2 {
 					regulator-name = "LDO2";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <3700000>;
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
 					regulator-always-on;
 
 					regulator-state-standby {
@@ -307,8 +349,11 @@
 };
 
 &i2c0 { /* mikrobus i2c */
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_mikrobus_i2c>;
+	pinctrl-1 = <&pinctrl_i2c0_gpio>;
+	sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	i2c-digital-filter;
 	i2c-digital-filter-width-ns = <35>;
 	status = "okay";
@@ -316,28 +361,31 @@
 
 &i2c1 {
 	dmas = <0>, <0>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	sda-gpios = <&pioA PIN_PD19 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&pioA PIN_PD20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	i2c-digital-filter;
 	i2c-digital-filter-width-ns = <35>;
 	status = "okay";
 
 	eeprom@50 {
-		compatible = "atmel,24c32";
+		compatible = "atmel,24c02";
 		reg = <0x50>;
 		pagesize = <16>;
 		status = "okay";
 	};
 
 	eeprom@52 {
-		compatible = "atmel,24c32";
+		compatible = "atmel,24c02";
 		reg = <0x52>;
 		pagesize = <16>;
 		status = "disabled";
 	};
 
 	eeprom@53 {
-		compatible = "atmel,24c32";
+		compatible = "atmel,24c02";
 		reg = <0x53>;
 		pagesize = <16>;
 		status = "disabled";
@@ -402,6 +450,12 @@
 		bias-disable;
 	};
 
+	pinctrl_i2c1_gpio: i2c1_gpio {
+                pinmux = <PIN_PD19__GPIO>,
+                         <PIN_PD20__GPIO>;
+                bias-disable;
+        };
+
 	pinctrl_key_gpio_default: key_gpio_default {
 		pinmux = <PIN_PD0__GPIO>;
 		bias-pull-up;
@@ -463,6 +517,12 @@
 		bias-disable;
 	};
 
+	pinctrl_i2c0_gpio: i2c0_gpio {
+		pinmux = <PIN_PD21__GPIO>,
+			 <PIN_PD22__GPIO>;
+		bias-disable;
+	};
+
 	pinctrl_mikrobus1_an: mikrobus1_an {
 		pinmux = <PIN_PD26__GPIO>;
 		bias-disable;
@@ -653,7 +713,8 @@
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		spi-max-frequency = <80000000>;
+		spi-max-frequency = <104000000>;
+		spi-cs-setup-delay-ns = <7>;
 		spi-tx-bus-width = <4>;
 		spi-rx-bus-width = <4>;
 		m25p,fast-read;
diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts
index 8ed58af01391..10d69f6957cf 100644
--- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts
@@ -20,9 +20,9 @@
 
 	aliases {
 		serial0 = &uart0;	/* DBGU */
-		i2c0	= &i2c0;	/* mikroBUS 1 */
-		i2c1	= &i2c1;	/* XPRO EXT1 */
-		i2c2	= &i2c2;
+		i2c0 = &i2c0;	/* mikroBUS 1 */
+		i2c1 = &i2c1;	/* XPRO EXT1 */
+		i2c2 = &i2c2;
 	};
 
 	chosen {
@@ -47,7 +47,7 @@
 			status = "okay";
 		};
 
-		usb1: ohci@400000 {
+		usb1: usb@400000 {
 			num-ports = <3>;
 			atmel,vbus-gpio = <0
 					   &pioA PIN_PB12 GPIO_ACTIVE_HIGH
@@ -58,7 +58,7 @@
 			status = "okay";
 		};
 
-		usb2: ehci@500000 {
+		usb2: usb@500000 {
 			status = "okay";
 		};
 
@@ -139,6 +139,8 @@
 			macb0: ethernet@f8008000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				phy-mode = "rmii";
 				status = "okay";
 
@@ -202,7 +204,7 @@
 				};
 			};
 
-			shdwc@f8048010 {
+			poweroff@f8048010 {
 				debounce-delay-us = <976>;
 
 				input@0 {
@@ -229,7 +231,7 @@
 				scl-gpios = <&pioA PIN_PC7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 				status = "okay";
 
-				at24@50 {
+				eeprom@50 {
 					compatible = "atmel,24c02";
 					reg = <0x50>;
 					pagesize = <8>;
@@ -394,13 +396,13 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_key_gpio_default>;
 
-		bp1 {
+		button-1 {
 			label = "PB_USER";
 			gpios = <&pioA PIN_PA10 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_PROG1>;
@@ -414,17 +416,17 @@
 		pinctrl-0 = <&pinctrl_led_gpio_default>;
 		status = "okay";
 
-		red {
+		led-red {
 			label = "red";
 			gpios = <&pioA PIN_PB10 GPIO_ACTIVE_HIGH>;
 		};
 
-		green {
+		led-green {
 			label = "green";
 			gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>;
 		};
 
-		blue {
+		led-blue {
 			label = "blue";
 			gpios = <&pioA PIN_PB6 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts
index b1e854f658de..7e77a55ed41d 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts
@@ -46,7 +46,7 @@
 			status = "okay";
 		};
 
-		usb1: ohci@400000 {
+		usb1: usb@400000 {
 			num-ports = <3>;
 			atmel,vbus-gpio = <0 /* &pioA PIN_PB9 GPIO_ACTIVE_HIGH */
 					   &pioA PIN_PB10 GPIO_ACTIVE_HIGH
@@ -57,7 +57,7 @@
 			status = "okay";
 		};
 
-		usb2: ehci@500000 {
+		usb2: usb@500000 {
 			status = "okay";
 		};
 
@@ -66,7 +66,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_sdmmc0_default>;
 			non-removable;
-			mmc-ddr-1_8v;
+			mmc-ddr-3_3v;
 			status = "okay";
 		};
 
@@ -137,7 +137,7 @@
 				pinctrl-0 = <&pinctrl_spi0_default>;
 				status = "okay";
 
-				m25p80@0 {
+				flash@0 {
 					compatible = "atmel,at25df321a";
 					reg = <0>;
 					spi-max-frequency = <50000000>;
@@ -147,6 +147,8 @@
 			macb0: ethernet@f8008000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				phy-mode = "rmii";
 				status = "okay";
 
@@ -205,10 +207,10 @@
 
 							regulator-state-mem {
 								regulator-on-in-suspend;
-								regulator-suspend-min-microvolt=<1400000>;
-								regulator-suspend-max-microvolt=<1400000>;
+								regulator-suspend-min-microvolt = <1400000>;
+								regulator-suspend-max-microvolt = <1400000>;
 								regulator-changeable-in-suspend;
-								regulator-mode=<ACT8945A_REGULATOR_MODE_LOWPOWER>;
+								regulator-mode = <ACT8945A_REGULATOR_MODE_LOWPOWER>;
 							};
 						};
 
@@ -346,7 +348,7 @@
 				};
 			};
 
-			shdwc@f8048010 {
+			poweroff@f8048010 {
 				debounce-delay-us = <976>;
 				atmel,wakeup-rtc-timer;
 
@@ -409,7 +411,7 @@
 				scl-gpios = <&pioA PIN_PD5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 				status = "okay";
 
-				at24@54 {
+				eeprom@54 {
 					compatible = "atmel,24c02";
 					reg = <0x54>;
 					pagesize = <16>;
@@ -619,10 +621,9 @@
 						bias-disable;
 					};
 
-					ck_cd_rstn_vddsel {
+					ck_cd_rstn {
 						pinmux = <PIN_PA0__SDMMC0_CK>,
 							 <PIN_PA10__SDMMC0_RSTN>,
-							 <PIN_PA11__SDMMC0_VDDSEL>,
 							 <PIN_PA13__SDMMC0_CD>;
 						bias-disable;
 					};
@@ -704,13 +705,13 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_key_gpio_default>;
 
-		bp1 {
+		button {
 			label = "PB_USER";
 			gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_PROG1>;
@@ -724,18 +725,18 @@
 		pinctrl-0 = <&pinctrl_led_gpio_default>;
 		status = "okay"; /* conflict with pwm0 */
 
-		red {
+		led-red {
 			label = "red";
 			gpios = <&pioA PIN_PB6 GPIO_ACTIVE_LOW>;
 		};
 
 
-		green {
+		led-green {
 			label = "green";
 			gpios = <&pioA PIN_PB5 GPIO_ACTIVE_LOW>;
 		};
 
-		blue {
+		led-blue {
 			label = "blue";
 			gpios = <&pioA PIN_PB0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d3_eds.dts b/arch/arm/boot/dts/microchip/at91-sama5d3_eds.dts
new file mode 100644
index 000000000000..c287b03d768b
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sama5d3_eds.dts
@@ -0,0 +1,307 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * at91-sama5d3_eds.dts - Device Tree file for the SAMA5D3 Ethernet
+ *    Development System board.
+ *
+ * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Jerry Ray <jerry.ray@microchip.com>
+ */
+/dts-v1/;
+#include "sama5d36.dtsi"
+
+/ {
+	model = "SAMA5D3 Ethernet Development System";
+	compatible = "microchip,sama5d3-eds", "atmel,sama5d36",
+		     "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio>;
+
+		button-3 {
+			label = "PB_USER";
+			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
+			linux,code = <0x104>;
+			wakeup-source;
+		};
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x10000000>;
+	};
+
+	vcc_3v3_reg: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vcc_2v5_reg: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_2V5";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+		vin-supply = <&vcc_3v3_reg>;
+	};
+
+	vcc_1v8_reg: regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&vcc_3v3_reg>;
+	};
+
+	vcc_1v2_reg: regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+	};
+
+	vcc_mmc0_reg: regulator-5 {
+		compatible = "regulator-fixed";
+		regulator-name = "mmc0-card-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vcc_mmc0_reg_gpio>;
+		gpio = <&pioE 2 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	nand_controller: nand-controller {
+		status = "okay";
+
+		nand@3 {
+			reg = <0x3 0x0 0x2>;
+			atmel,rb = <0>;
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-ecc-strength = <4>;
+			nand-ecc-step-size = <512>;
+			nand-on-flash-bbt;
+			label = "atmel_nand";
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				at91bootstrap@0 {
+					label = "at91bootstrap";
+					reg = <0x0 0x40000>;
+				};
+
+				bootloader@40000 {
+					label = "bootloader";
+					reg = <0x40000 0xc0000>;
+				};
+
+				bootloaderenvred@100000 {
+					label = "bootloader env redundant";
+					reg = <0x100000 0x40000>;
+				};
+
+				bootloaderenv@140000 {
+					label = "bootloader env";
+					reg = <0x140000 0x40000>;
+				};
+
+				dtb@180000 {
+					label = "device tree";
+					reg = <0x180000 0x80000>;
+				};
+
+				kernel@200000 {
+					label = "kernel";
+					reg = <0x200000 0x600000>;
+				};
+
+				rootfs@800000 {
+					label = "rootfs";
+					reg = <0x800000 0x0f800000>;
+				};
+			};
+		};
+	};
+};
+
+&i2c0 {
+	pinctrl-0 = <&pinctrl_i2c0_pu>;
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-0 = <&pinctrl_i2c2_pu>;
+	status = "okay";
+};
+
+&main_xtal {
+	clock-frequency = <12000000>;
+};
+
+&mmc0 {
+	pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3
+		     &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>;
+	vmmc-supply = <&vcc_mmc0_reg>;
+	vqmmc-supply = <&vcc_3v3_reg>;
+	status = "okay";
+	slot@0 {
+		reg = <0>;
+		bus-width = <8>;
+		cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	board {
+		pinctrl_i2c0_pu: i2c0-pu {
+			atmel,pins =
+				<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+				<AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_i2c2_pu: i2c2-pu {
+			atmel,pins =
+				<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
+				<AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_key_gpio: key-gpio-0 {
+			atmel,pins =
+				<AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+		};
+
+		pinctrl_mmc0_cd: mmc0-cd {
+			atmel,pins =
+				<AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+		};
+
+		/* Reserved for reset signal to the RGMII connector. */
+		pinctrl_rgmii_rstn: rgmii-rstn {
+			atmel,pins =
+				<AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+		};
+
+		/* Reserved for an interrupt line from the RMII and RGMII connectors. */
+		pinctrl_spi_irqn: spi-irqn {
+			atmel,pins =
+				<AT91_PIOB 28 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_spi0_cs: spi0-cs-default {
+			atmel,pins =
+				<AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				 AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_spi1_cs: spi1-cs-default {
+			atmel,pins = <AT91_PIOC 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOC 28 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_usba_vbus: usba-vbus {
+			atmel,pins =
+				<AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_usb_default: usb-default {
+			atmel,pins =
+				<AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				 AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		/* Reserved for VBUS fault interrupt. */
+		pinctrl_vbusfault_irqn: vbusfault-irqn {
+			atmel,pins =
+				<AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_vcc_mmc0_reg_gpio: vcc-mmc0-reg-gpio-default {
+			atmel,pins = <AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+		};
+	};
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
+&spi0 {
+	pinctrl-names = "default", "cs";
+	pinctrl-1 = <&pinctrl_spi0_cs>;
+	cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default", "cs";
+	pinctrl-1 = <&pinctrl_spi1_cs>;
+	cs-gpios = <&pioC 25 0>, <0>, <0>, <&pioC 28 0>;
+	status = "okay";
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&usb0 {	/* USB Device port with VBUS detection. */
+	atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	status = "okay";
+};
+
+&usb1 {	/* 3-port Host. First port is unused. */
+	atmel,vbus-gpio = <0
+			   &pioE 3 GPIO_ACTIVE_HIGH
+			   &pioE 4 GPIO_ACTIVE_HIGH
+			  >;
+	num-ports = <3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_default>;
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts b/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts
new file mode 100644
index 000000000000..b66570080894
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts
@@ -0,0 +1,227 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2021 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
+ */
+/dts-v1/;
+#include "sama5d36.dtsi"
+
+/ {
+	model = "EVB-KSZ9477";
+	compatible = "microchip,sama5d3-ksz9477-evb", "atmel,sama5d36",
+		     "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		stdout-path = &dbgu;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_vcc_mmc0: regulator-mmc0 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mcc0_vcc>;
+		regulator-name = "mmc0-vcc";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		gpio = <&pioE 2 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-0 = <&pinctrl_i2c0_pu>;
+	status = "okay";
+};
+
+&macb0 {
+	phy-mode = "rgmii";
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&main_xtal {
+	clock-frequency = <12000000>;
+};
+
+&mmc0 {
+	pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3
+		     &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>;
+	status = "okay";
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <8>;
+		cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>;
+		disable-wp;
+		vmmc-supply = <&reg_vcc_mmc0>;
+		vqmmc-supply = <&reg_3v3>;
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@3 {
+		reg = <0x3 0x0 0x2>;
+		atmel,rb = <0>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+	};
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
+&spi0 {
+	cs-gpios = <&pioD 13 GPIO_ACTIVE_LOW>, <0>, <0>,
+		   <&pioD 16 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-0 = <&pinctrl_spi_ksz>;
+	cs-gpios = <&pioC 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	switch@0 {
+		compatible = "microchip,ksz9477";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		spi-cpha;
+		spi-cpol;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan1";
+				phy-mode = "internal";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan2";
+				phy-mode = "internal";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan3";
+				phy-mode = "internal";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan4";
+				phy-mode = "internal";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "lan5";
+				phy-mode = "internal";
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&macb0>;
+				phy-mode = "rgmii-txid";
+				tx-internal-delay-ps = <2000>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&pinctrl {
+	board {
+		pinctrl_i2c0_pu: i2c0-pu {
+			atmel,pins =
+				<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+				<AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_mmc0_cd: mmc0-cd {
+			atmel,pins = <AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_mcc0_vcc: mmc0-vcc {
+			atmel,pins = <AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_spi_ksz: spi-ksz {
+			atmel,pins =
+				<
+				/* SPI1_MISO */
+				AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				/* SPI1_MOSI */
+				AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE
+				/* SPI1_SPCK */
+				AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE
+
+				/* SPI CS */
+				AT91_PIOC 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				/* switch IRQ */
+				AT91_PIOB 28 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH
+				/* switch PME_N, SoC IN */
+				AT91_PIOC 30 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP
+				/* switch RST */
+				AT91_PIOC 31 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH
+				>;
+		};
+
+		pinctrl_usba_vbus: usba-vbus {
+			atmel,pins =
+				<AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/microchip/at91-sama5d3_xplained.dts
index d72c042f2850..d2c43957497d 100644
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d3_xplained.dts
@@ -57,8 +57,8 @@
 			};
 
 			spi0: spi@f0004000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi0_cs>;
+				pinctrl-names = "default", "cs";
+				pinctrl-1 = <&pinctrl_spi0_cs>;
 				cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
 				status = "okay";
 			};
@@ -87,7 +87,7 @@
 			i2c1: i2c@f0018000 {
 				status = "okay";
 
-				pmic: act8865@5b {
+				act8865: pmic@5b {
 					compatible = "active-semi,act8865";
 					reg = <0x5b>;
 					status = "disabled";
@@ -171,8 +171,8 @@
 			};
 
 			spi1: spi@f8008000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi1_cs>;
+				pinctrl-names = "default", "cs";
+				pinctrl-1 = <&pinctrl_spi1_cs>;
 				cs-gpios = <&pioC 25 0>;
 				status = "okay";
 			};
@@ -283,7 +283,7 @@
 			status = "okay";
 		};
 
-		usb1: ohci@600000 {
+		usb1: usb@600000 {
 			num-ports = <3>;
 			atmel,vbus-gpio = <0
 					   &pioE 3 GPIO_ACTIVE_LOW
@@ -294,7 +294,7 @@
 			status = "okay";
 		};
 
-		usb2: ehci@700000 {
+		usb2: usb@700000 {
 			status = "okay";
 		};
 
@@ -372,13 +372,13 @@
 		regulator-always-on;
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_key_gpio>;
 
-		bp3 {
+		button {
 			label = "PB_USER";
 			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_PROG1>;
@@ -392,13 +392,13 @@
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 		status = "okay";
 
-		d2 {
+		led-d2 {
 			label = "d2";
 			gpios = <&pioE 23 GPIO_ACTIVE_LOW>;	/* PE23, conflicts with A23, CTS2 */
 			linux,default-trigger = "heartbeat";
 		};
 
-		d3 {
+		led-d3 {
 			label = "d3"; /* Conflict with EBI CS0, USART2 CTS. */
 			gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi b/arch/arm/boot/dts/microchip/at91-sama5d4_ma5d4.dtsi
index 710cb72bda5a..fd1086f52b40 100644
--- a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
+++ b/arch/arm/boot/dts/microchip/at91-sama5d4_ma5d4.dtsi
@@ -49,7 +49,7 @@
 				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
 				status = "okay";
 
-				m25p80@0 {
+				flash@0 {
 					compatible = "atmel,at25df321a";
 					spi-max-frequency = <50000000>;
 					reg = <0>;
diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts b/arch/arm/boot/dts/microchip/at91-sama5d4_ma5d4evk.dts
index 4d7cee569ff2..b9725e400501 100644
--- a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d4_ma5d4evk.dts
@@ -22,7 +22,7 @@
 			status = "okay";
 		};
 
-		usb1: ohci@500000 {
+		usb1: usb@500000 {
 			num-ports = <3>;
 			atmel,vbus-gpio = <0
 					   &pioE 11 GPIO_ACTIVE_LOW
@@ -31,7 +31,7 @@
 			status = "okay";
 		};
 
-		usb2: ehci@600000 {
+		usb2: usb@600000 {
 			status = "okay";
 		};
 
@@ -115,19 +115,19 @@
 		compatible = "gpio-leds";
 		status = "okay";
 
-		user1 {
+		led-user1 {
 			label = "user1";
 			gpios = <&pioD 28 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		user2 {
+		led-user2 {
 			label = "user2";
 			gpios = <&pioD 29 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		user3 {
+		led-user3 {
 			label = "user3";
 			gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/microchip/at91-sama5d4_xplained.dts
index d241c24f0d83..0ecccb9a809d 100644
--- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d4_xplained.dts
@@ -81,8 +81,8 @@
 			};
 
 			spi1: spi@fc018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi0_cs>;
+				pinctrl-names = "default", "cs";
+				pinctrl-1 = <&pinctrl_spi1_cs>;
 				cs-gpios = <&pioB 21 0>;
 				status = "okay";
 			};
@@ -140,7 +140,7 @@
 						atmel,pins =
 							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
 					};
-					pinctrl_spi0_cs: spi0_cs_default {
+					pinctrl_spi1_cs: spi1_cs_default {
 						atmel,pins =
 							<AT91_PIOB 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
 					};
@@ -164,7 +164,7 @@
 			status = "okay";
 		};
 
-		usb1: ohci@500000 {
+		usb1: usb@500000 {
 			num-ports = <3>;
 			atmel,vbus-gpio = <0
 					   &pioE 11 GPIO_ACTIVE_HIGH
@@ -175,7 +175,7 @@
 			status = "okay";
 		};
 
-		usb2: ehci@600000 {
+		usb2: usb@600000 {
 			status = "okay";
 		};
 
@@ -242,13 +242,13 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_key_gpio>;
 
-		pb_user1 {
+		button {
 			label = "pb_user1";
 			gpios = <&pioE 8 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_PROG1>;
@@ -262,13 +262,13 @@
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 		status = "okay";
 
-		d8 {
+		led-d8 {
 			label = "d8";
 			gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 
-		d10 {
+		led-d10 {
 			label = "d10";
 			gpios = <&pioE 15 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d4ek.dts
index fe432b6b7e95..69107d6cd26c 100644
--- a/arch/arm/boot/dts/at91-sama5d4ek.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d4ek.dts
@@ -65,7 +65,7 @@
 			spi0: spi@f8010000 {
 				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
 				status = "okay";
-				m25p80@0 {
+				flash@0 {
 					compatible = "atmel,at25df321a";
 					spi-max-frequency = <50000000>;
 					reg = <0>;
@@ -198,7 +198,7 @@
 			status = "okay";
 		};
 
-		usb1: ohci@500000 {
+		usb1: usb@500000 {
 			num-ports = <3>;
 			atmel,vbus-gpio = <0 /* &pioE 10 GPIO_ACTIVE_LOW */
 					   &pioE 11 GPIO_ACTIVE_LOW
@@ -207,7 +207,7 @@
 			status = "okay";
 		};
 
-		usb2: ehci@600000 {
+		usb2: usb@600000 {
 			status = "okay";
 		};
 
@@ -269,13 +269,13 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_key_gpio>;
 
-		pb_user1 {
+		button {
 			label = "pb_user1";
 			gpios = <&pioE 13 GPIO_ACTIVE_HIGH>;
 			linux,code = <0x100>;
@@ -287,18 +287,18 @@
 		compatible = "gpio-leds";
 		status = "okay";
 
-		d8 {
+		led-d8 {
 			label = "d8";
 			/* PE28, conflicts with usart4 rts pin */
 			gpios = <&pioE 28 GPIO_ACTIVE_LOW>;
 		};
 
-		d9 {
+		led-d9 {
 			label = "d9";
 			gpios = <&pioE 9 GPIO_ACTIVE_HIGH>;
 		};
 
-		d10 {
+		led-d10 {
 			label = "d10";
 			gpios = <&pioE 8 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts
new file mode 100644
index 000000000000..927c27260b6c
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts
@@ -0,0 +1,459 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ *  at91-sama7d65_curiosity.dts - Device Tree file for SAMA7D65 Curiosity board
+ *
+ *  Copyright (c) 2024 Microchip Technology Inc. and its subsidiaries
+ *
+ *  Author: Romain Sioen <romain.sioen@microchip.com>
+ *
+ */
+/dts-v1/;
+#include "sama7d65-pinfunc.h"
+#include "sama7d65.dtsi"
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/at91.h>
+
+/ {
+	model = "Microchip SAMA7D65 Curiosity";
+	compatible = "microchip,sama7d65-curiosity", "microchip,sama7d65",
+		     "microchip,sama7d6", "microchip,sama7";
+
+	aliases {
+		serial0 = &uart6;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button {
+			label = "PB_USER";
+			gpios = <&pioa PIN_PC10 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+
+		led0: led-red {
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&pioa PIN_PB17 GPIO_ACTIVE_HIGH>; /* Conflict with pwm. */
+		};
+
+		led1: led-green {
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pioa PIN_PB15 GPIO_ACTIVE_HIGH>; /* Conflict with pwm. */
+		};
+
+		led2: led-blue {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&pioa PIN_PA21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_MAIN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_default>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2_default>;
+	status = "okay";
+};
+
+&can3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can3_default>;
+	status = "okay";
+};
+
+&dma0 {
+	status = "okay";
+};
+
+&dma1 {
+	status = "okay";
+};
+
+&dma2 {
+	status = "okay";
+};
+
+&flx6 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6_default>;
+	status = "okay";
+};
+
+&flx10 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+};
+
+&gmac0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gmac0_default
+		     &pinctrl_gmac0_mdio_default
+		     &pinctrl_gmac0_txck_default
+		     &pinctrl_gmac0_phy_irq>;
+	phy-mode = "rgmii-id";
+	nvmem-cells = <&eeprom0_eui48>;
+	nvmem-cell-names = "mac-address";
+	status = "okay";
+
+	ethernet-phy@7 {
+		reg = <0x7>;
+		interrupt-parent = <&pioa>;
+		interrupts = <PIN_PC1 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c10 {
+	dmas = <0>, <0>;
+	i2c-analog-filter;
+	i2c-digital-filter;
+	i2c-digital-filter-width-ns = <35>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c10_default>;
+	status = "okay";
+
+	power-monitor@10 {
+		compatible = "microchip,pac1934";
+		reg = <0x10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@1 {
+			reg = <0x1>;
+			shunt-resistor-micro-ohms = <47000>;
+			label = "VDD3V3";
+		};
+
+		channel@2 {
+			reg = <0x2>;
+			shunt-resistor-micro-ohms = <47000>;
+			label = "VDDIODDR";
+		};
+
+		channel@3 {
+			reg = <0x3>;
+			shunt-resistor-micro-ohms = <47000>;
+			label = "VDDCORE";
+		};
+
+		channel@4 {
+			reg = <0x4>;
+			shunt-resistor-micro-ohms = <47000>;
+			label = "VDDCPU";
+		};
+	};
+
+	pmic@5b {
+		compatible = "microchip,mcp16502";
+		reg = <0x5b>;
+		lvin-supply = <&reg_5v>;
+		pvin1-supply = <&reg_5v>;
+		pvin2-supply = <&reg_5v>;
+		pvin3-supply = <&reg_5v>;
+		pvin4-supply = <&reg_5v>;
+		status = "okay";
+
+		regulators {
+			vdd_3v3: VDD_IO {
+				regulator-name = "VDD_IO";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vddioddr: VDD_DDR {
+				regulator-name = "VDD_DDR";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1350000>;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1350000>;
+					regulator-mode = <4>;
+				};
+			};
+
+			vddcore: VDD_CORE {
+				regulator-name = "VDD_CORE";
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1050000>;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vddcpu: VDD_OTHER {
+				regulator-name = "VDD_OTHER";
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-ramp-delay = <3125>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1050000>;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-suspend-microvolt = <1800000>;
+					regulator-on-in-suspend;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vldo2: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3700000>;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	eeprom0: eeprom@51 {
+		compatible = "microchip,24aa025e48";
+		reg = <0x51>;
+		size = <256>;
+		pagesize = <16>;
+		vcc-supply = <&vdd_3v3>;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eeprom0_eui48: eui48@fa {
+				reg = <0xfa 0x6>;
+			};
+		};
+	};
+};
+
+&main_xtal {
+	clock-frequency = <24000000>;
+};
+
+&pioa {
+	pinctrl_can1_default: can1-default {
+		pinmux = <PIN_PD10__CANTX1>,
+			 <PIN_PD11__CANRX1>;
+		bias-disable;
+	};
+
+	pinctrl_can2_default: can2-default {
+		pinmux = <PIN_PD12__CANTX2>,
+			 <PIN_PD13__CANRX2>;
+		bias-disable;
+	};
+
+	pinctrl_can3_default: can3-default {
+		pinmux = <PIN_PD14__CANTX3>,
+			 <PIN_PD15__CANRX3>;
+		bias-disable;
+	};
+
+	pinctrl_gmac0_default: gmac0-default {
+		pinmux = <PIN_PA26__G0_TX0>,
+			 <PIN_PA27__G0_TX1>,
+			 <PIN_PB4__G0_TX2>,
+			 <PIN_PB5__G0_TX3>,
+			 <PIN_PA29__G0_RX0>,
+			 <PIN_PA30__G0_RX1>,
+			 <PIN_PB2__G0_RX2>,
+			 <PIN_PB6__G0_RX3>,
+			 <PIN_PA25__G0_TXCTL>,
+			 <PIN_PB3__G0_RXCK>,
+			 <PIN_PA28__G0_RXCTL>;
+		slew-rate = <0>;
+		bias-disable;
+	};
+
+	pinctrl_gmac0_mdio_default: gmac0-mdio-default {
+		pinmux = <PIN_PA31__G0_MDC>,
+			 <PIN_PB0__G0_MDIO>;
+		bias-disable;
+	};
+
+	pinctrl_gmac0_phy_irq: gmac0-phy-irq {
+		pinmux = <PIN_PC1__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_gmac0_txck_default: gmac0-txck-default {
+		pinmux = <PIN_PB1__G0_REFCK>;
+		slew-rate = <0>;
+		bias-pull-up;
+	};
+
+	pinctrl_i2c10_default: i2c10-default {
+		pinmux = <PIN_PB19__FLEXCOM10_IO1>,
+			 <PIN_PB20__FLEXCOM10_IO0>;
+		bias-pull-up;
+	};
+
+	pinctrl_key_gpio_default: key-gpio-default {
+		pinmux = <PIN_PC10__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_led_gpio_default: led-gpio-default {
+		pinmux = <PIN_PB15__GPIO>,
+			 <PIN_PB17__GPIO>,
+			 <PIN_PA21__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_sdmmc1_default: sdmmc1-default {
+		cmd-data {
+			pinmux = <PIN_PB22__SDMMC1_CMD>,
+				 <PIN_PB24__SDMMC1_DAT0>,
+				 <PIN_PB25__SDMMC1_DAT1>,
+				 <PIN_PB26__SDMMC1_DAT2>,
+				 <PIN_PB27__SDMMC1_DAT3>;
+			slew-rate = <0>;
+			bias-disable;
+		};
+
+		ck-cd-rstn-vddsel {
+			pinmux = <PIN_PB23__SDMMC1_CK>,
+				 <PIN_PB21__SDMMC1_RSTN>,
+				 <PIN_PB30__SDMMC1_1V8SEL>,
+				 <PIN_PB29__SDMMC1_CD>,
+				 <PIN_PB28__SDMMC1_WP>;
+			slew-rate = <0>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_uart6_default: uart6-default {
+		pinmux = <PIN_PD18__FLEXCOM6_IO0>,
+			 <PIN_PD19__FLEXCOM6_IO1>;
+		bias-disable;
+	};
+};
+
+&rtt {
+	atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	no-1-8-v;
+	sdhci-caps-mask = <0x0 0x00200000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc1_default>;
+	status = "okay";
+};
+
+&shdwc {
+	debounce-delay-us = <976>;
+	status = "okay";
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
diff --git a/arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts
new file mode 100644
index 000000000000..eb5f27ce1942
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts
@@ -0,0 +1,558 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama7g54_curiosity.dts - Device Tree file for SAMA7G54 Curiosity Board
+ *
+ * Copyright (C) 2024 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Mihai Sain <mihai.sain@microchip.com>
+ *
+ */
+/dts-v1/;
+#include "sama7g5-pinfunc.h"
+#include "sama7g5.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/pinctrl/at91.h>
+
+/ {
+	model = "Microchip SAMA7G54 Curiosity";
+	compatible = "microchip,sama7g54-curiosity", "microchip,sama7g5", "microchip,sama7";
+
+	aliases {
+		serial0 = &uart3;
+		i2c0 = &i2c10;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button-user {
+			label = "user-button";
+			gpios = <&pioA PIN_PD19 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+
+		led-red {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&pioA PIN_PD13 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-green {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_BOOT;
+			gpios = <&pioA PIN_PD14 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-blue {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_CPU;
+			gpios = <&pioA PIN_PB15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x10000000>; /* 256 MiB DDR3L-1066 16-bit */
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_MAIN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&adc {
+	vddana-supply = <&vddout25>;
+	vref-supply = <&vddout25>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus1_an_default &pinctrl_mikrobus2_an_default>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu>;
+};
+
+&dma0 {
+	status = "okay";
+};
+
+&dma1 {
+	status = "okay";
+};
+
+&dma2 {
+	status = "okay";
+};
+
+&ebi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nand_default>;
+	status = "okay";
+
+	nand_controller: nand-controller {
+		status = "okay";
+
+		nand@3 {
+			reg = <0x3 0x0 0x800000>;
+			atmel,rb = <0>;
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-ecc-strength = <8>;
+			nand-ecc-step-size = <512>;
+			nand-on-flash-bbt;
+			label = "nand";
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				at91bootstrap@0 {
+					label = "nand: at91bootstrap";
+					reg = <0x0 0x40000>;
+				};
+
+				bootloader@40000 {
+					label = "nand: u-boot";
+					reg = <0x40000 0x100000>;
+				};
+
+				bootloaderenv@140000 {
+					label = "nand: u-boot env";
+					reg = <0x140000 0x40000>;
+				};
+
+				dtb@180000 {
+					label = "nand: device tree";
+					reg = <0x180000 0x80000>;
+				};
+
+				kernel@200000 {
+					label = "nand: kernel";
+					reg = <0x200000 0x600000>;
+				};
+
+				rootfs@800000 {
+					label = "nand: rootfs";
+					reg = <0x800000 0x1f800000>;
+				};
+			};
+		};
+	};
+};
+
+&flx3 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart3: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx3_default>;
+		status = "okay";
+	};
+};
+
+&flx10 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c10: i2c@600 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx10_default>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+
+		power-monitor@1f {
+			compatible = "microchip,pac1934";
+			reg = <0x1f>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@1 {
+				reg = <0x1>;
+				shunt-resistor-micro-ohms = <47000>;
+				label = "VDD3V3";
+			};
+
+			channel@2 {
+				reg = <0x2>;
+				shunt-resistor-micro-ohms = <47000>;
+				label = "VDDIODDR";
+			};
+
+			channel@3 {
+				reg = <0x3>;
+				shunt-resistor-micro-ohms = <47000>;
+				label = "VDDCORE";
+			};
+
+			channel@4 {
+				reg = <0x4>;
+				shunt-resistor-micro-ohms = <47000>;
+				label = "VDDCPU";
+			};
+		};
+
+		eeprom@51 {
+			compatible = "atmel,24c02";
+			reg = <0x51>;
+			pagesize = <16>;
+			size = <256>;
+			vcc-supply = <&vdd_3v3>;
+		};
+
+		pmic@5b {
+			compatible = "microchip,mcp16502";
+			reg = <0x5b>;
+			lvin-supply = <&reg_5v>;
+			pvin1-supply = <&reg_5v>;
+			pvin2-supply = <&reg_5v>;
+			pvin3-supply = <&reg_5v>;
+			pvin4-supply = <&reg_5v>;
+
+			regulators {
+				vdd_3v3: VDD_IO {
+					regulator-name = "VDD_IO";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <3300000>;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				vddioddr: VDD_DDR {
+					regulator-name = "VDD_DDR";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <1350000>;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <1350000>;
+						regulator-mode = <4>;
+					};
+				};
+
+				vddcore: VDD_CORE {
+					regulator-name = "VDD_CORE";
+					regulator-min-microvolt = <1150000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <1150000>;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				vddcpu: VDD_OTHER {
+					regulator-name = "VDD_OTHER";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-ramp-delay = <3125>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <1050000>;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				vldo1: LDO1 {
+					regulator-name = "LDO1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-suspend-microvolt = <1800000>;
+						regulator-on-in-suspend;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				vldo2: LDO2 {
+					regulator-name = "LDO2";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-suspend-microvolt = <3300000>;
+						regulator-on-in-suspend;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+			};
+		};
+	};
+};
+
+&main_xtal {
+	clock-frequency = <24000000>;
+};
+
+&qspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi1_default>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-max-frequency = <100000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		m25p,fast-read;
+		label = "at91-qspi";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			at91bootstrap@0 {
+				label = "qspi1: at91bootstrap";
+				reg = <0x0 0x40000>;
+			};
+
+			bootloader@40000 {
+				label = "qspi1: u-boot";
+				reg = <0x40000 0x100000>;
+			};
+
+			bootloaderenv@140000 {
+				label = "qspi1: u-boot env";
+				reg = <0x140000 0x40000>;
+			};
+
+			dtb@180000 {
+				label = "qspi1: device tree";
+				reg = <0x180000 0x80000>;
+			};
+
+			kernel@200000 {
+				label = "qspi1: kernel";
+				reg = <0x200000 0x600000>;
+			};
+		};
+	};
+};
+
+&pioA {
+	pinctrl_flx3_default: flx3-default {
+		pinmux = <PIN_PD16__FLEXCOM3_IO0>,
+			 <PIN_PD17__FLEXCOM3_IO1>;
+		bias-pull-up;
+	};
+
+	pinctrl_flx10_default: flx10-default {
+		pinmux = <PIN_PC30__FLEXCOM10_IO0>,
+			 <PIN_PC31__FLEXCOM10_IO1>;
+		bias-pull-up;
+	};
+
+	pinctrl_key_gpio_default: key-gpio-default {
+		pinmux = <PIN_PD19__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_led_gpio_default: led-gpio-default {
+		pinmux = <PIN_PD13__GPIO>,
+			 <PIN_PD14__GPIO>,
+			 <PIN_PB15__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_mikrobus1_an_default: mikrobus1-an-default {
+		pinmux = <PIN_PC15__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_an_default: mikrobus2-an-default {
+		pinmux = <PIN_PC13__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_nand_default: nand-default {
+		pinmux = <PIN_PD9__D0>,
+			 <PIN_PD10__D1>,
+			 <PIN_PD11__D2>,
+			 <PIN_PC21__D3>,
+			 <PIN_PC22__D4>,
+			 <PIN_PC23__D5>,
+			 <PIN_PC24__D6>,
+			 <PIN_PD2__D7>,
+			 <PIN_PD3__NANDRDY>,
+			 <PIN_PD4__NCS3_NANDCS>,
+			 <PIN_PD5__NWE_NWR0_NANDWE>,
+			 <PIN_PD6__NRD_NANDOE>,
+			 <PIN_PD7__A21_NANDALE>,
+			 <PIN_PD8__A22_NANDCLE>;
+		bias-disable;
+		slew-rate = <0>;
+	};
+
+	pinctrl_qspi1_default: qspi1-default {
+		pinmux = <PIN_PB22__QSPI1_IO3>,
+			 <PIN_PB23__QSPI1_IO2>,
+			 <PIN_PB24__QSPI1_IO1>,
+			 <PIN_PB25__QSPI1_IO0>,
+			 <PIN_PB26__QSPI1_CS>,
+			 <PIN_PB27__QSPI1_SCK>;
+		bias-pull-up;
+		slew-rate = <0>;
+	};
+
+	pinctrl_sdmmc0_default: sdmmc0-default {
+		pinmux = <PIN_PA0__SDMMC0_CK>,
+			 <PIN_PA1__SDMMC0_CMD>,
+			 <PIN_PA2__SDMMC0_RSTN>,
+			 <PIN_PA3__SDMMC0_DAT0>,
+			 <PIN_PA4__SDMMC0_DAT1>,
+			 <PIN_PA5__SDMMC0_DAT2>,
+			 <PIN_PA6__SDMMC0_DAT3>;
+		bias-pull-up;
+		slew-rate = <0>;
+	};
+
+	pinctrl_sdmmc1_default: sdmmc1-default {
+		pinmux = <PIN_PB29__SDMMC1_CMD>,
+			 <PIN_PB30__SDMMC1_CK>,
+			 <PIN_PB31__SDMMC1_DAT0>,
+			 <PIN_PC0__SDMMC1_DAT1>,
+			 <PIN_PC1__SDMMC1_DAT2>,
+			 <PIN_PC2__SDMMC1_DAT3>,
+			 <PIN_PC4__SDMMC1_CD>;
+		bias-pull-up;
+		slew-rate = <0>;
+	};
+};
+
+&rtt {
+	atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+};
+
+/* M.2 slot for wireless card */
+&sdmmc0 {
+	bus-width = <4>;
+	cd-gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	sdhci-caps-mask = <0x0 0x00200000>;
+	vmmc-supply = <&vdd_3v3>;
+	vqmmc-supply = <&vdd_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default>;
+	status = "okay";
+};
+
+/* micro SD socket */
+&sdmmc1 {
+	bus-width = <4>;
+	disable-wp;
+	sdhci-caps-mask = <0x0 0x00200000>;
+	vmmc-supply = <&vdd_3v3>;
+	vqmmc-supply = <&vdd_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc1_default>;
+	status = "okay";
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
+&shdwc {
+	debounce-delay-us = <976>;
+	status = "okay";
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&trng {
+	status = "okay";
+};
+
+&vddout25 {
+	vin-supply = <&vdd_3v3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts b/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts
new file mode 100644
index 000000000000..3924f62ff0fb
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts
@@ -0,0 +1,917 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ *  at91-sama7g5ek.dts - Device Tree file for SAMA7G5-EK board
+ *
+ *  Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries
+ *
+ *  Author: Eugen Hristev <eugen.hristev@microchip.com>
+ *  Author: Claudiu Beznea <claudiu.beznea@microchip.com>
+ *
+ */
+/dts-v1/;
+#include "sama7g5-pinfunc.h"
+#include "sama7g5.dtsi"
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/sound/microchip,pdmc.h>
+
+/ {
+	model = "Microchip SAMA7G5-EK";
+	compatible = "microchip,sama7g5ek", "microchip,sama7g5", "microchip,sama7";
+
+	chosen {
+		bootargs = "rw root=/dev/mmcblk1p2 rootfstype=ext4 rootwait";
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart3;
+		serial1 = &uart4;
+		serial2 = &uart7;
+		serial3 = &uart0;
+		i2c0 = &i2c1;
+		i2c1 = &i2c8;
+		i2c2 = &i2c9;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button {
+			label = "PB_USER";
+			gpios = <&pioA PIN_PA12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+		status = "okay"; /* Conflict with pwm. */
+
+		red_led {
+			label = "red";
+			gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>;
+		};
+
+		green_led {
+			label = "green";
+			gpios = <&pioA PIN_PA13 GPIO_ACTIVE_HIGH>;
+		};
+
+		blue_led {
+			label = "blue";
+			gpios = <&pioA PIN_PD20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	/* 512 M */
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x20000000>;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_MAIN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	sound: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sama7g5ek audio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		simple-audio-card,dai-link@0 {
+			reg = <0>;
+			cpu {
+				sound-dai = <&spdiftx>;
+			};
+			codec {
+				sound-dai = <&spdif_out>;
+			};
+		};
+		simple-audio-card,dai-link@1 {
+			reg = <1>;
+			cpu {
+				sound-dai = <&spdifrx>;
+			};
+			codec {
+				sound-dai = <&spdif_in>;
+			};
+		};
+	};
+
+	spdif_in: spdif-in {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dir";
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+};
+
+&adc {
+	vddana-supply = <&vddout25>;
+	vref-supply = <&vddout25>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus1_an_default &pinctrl_mikrobus2_an_default>;
+	atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0_default>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_default>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu>;
+};
+
+&qspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <133000000>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+		m25p,fast-read;
+
+		at91bootstrap@0 {
+			label = "ospi: at91bootstrap";
+			reg = <0x0 0x40000>;
+		};
+
+		bootloader@40000 {
+			label = "ospi: bootloader";
+			reg = <0x40000 0xc0000>;
+		};
+
+		bootloaderenvred@100000 {
+			label = "ospi: bootloader env redundant";
+			reg = <0x100000 0x40000>;
+		};
+
+		bootloaderenv@140000 {
+			label = "ospi: bootloader env";
+			reg = <0x140000 0x40000>;
+		};
+
+		dtb@180000 {
+			label = "ospi: device tree";
+			reg = <0x180000 0x80000>;
+		};
+
+		kernel@200000 {
+			label = "ospi: kernel";
+			reg = <0x200000 0x600000>;
+		};
+
+		rootfs@800000 {
+			label = "ospi: rootfs";
+			reg = <0x800000 0x7800000>;
+		};
+
+	};
+};
+
+&dma0 {
+	status = "okay";
+};
+
+&dma1 {
+	status = "okay";
+};
+
+&dma2 {
+	status = "okay";
+};
+
+&flx0 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "disabled";
+
+	uart0: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx0_default>;
+		status = "disabled";
+	};
+};
+
+&flx1 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c1: i2c@600 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c1_default>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+
+		power-monitor@10 {
+			compatible = "microchip,pac1934";
+			reg = <0x10>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@1 {
+				reg = <0x1>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDD3V3";
+			};
+
+			channel@2 {
+				reg = <0x2>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDDIODDR";
+			};
+
+			channel@3 {
+				reg = <0x3>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDDCORE";
+			};
+
+			channel@4 {
+				reg = <0x4>;
+				shunt-resistor-micro-ohms = <10000>;
+				label = "VDDCPU";
+			};
+		};
+
+		pmic@5b {
+			compatible = "microchip,mcp16502";
+			reg = <0x5b>;
+			lvin-supply = <&reg_5v>;
+			pvin1-supply = <&reg_5v>;
+			pvin2-supply = <&reg_5v>;
+			pvin3-supply = <&reg_5v>;
+			pvin4-supply = <&reg_5v>;
+			status = "okay";
+
+			regulators {
+				vdd_3v3: VDD_IO {
+					regulator-name = "VDD_IO";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <3300000>;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				vddioddr: VDD_DDR {
+					regulator-name = "VDD_DDR";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <1350000>;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <1350000>;
+						regulator-mode = <4>;
+					};
+				};
+
+				vddcore: VDD_CORE {
+					regulator-name = "VDD_CORE";
+					regulator-min-microvolt = <1150000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <1150000>;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				vddcpu: VDD_OTHER {
+					regulator-name = "VDD_OTHER";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-ramp-delay = <3125>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <1050000>;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				vldo1: LDO1 {
+					regulator-name = "LDO1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-suspend-microvolt = <1800000>;
+						regulator-on-in-suspend;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				vldo2: LDO2 {
+					regulator-name = "LDO2";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <3700000>;
+
+					regulator-state-standby {
+						regulator-suspend-microvolt = <1800000>;
+						regulator-on-in-suspend;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+			};
+		};
+	};
+};
+
+&flx3 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart3: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx3_default>;
+		status = "okay";
+	};
+};
+
+&flx4 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart4: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx4_default>;
+		status = "okay";
+	};
+};
+
+&flx7 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart7: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx7_default>;
+		status = "okay";
+	};
+};
+
+&flx8 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c8: i2c@600 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c8_default>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+
+		eeprom0: eeprom@52 {
+			compatible = "microchip,24aa025e48";
+			reg = <0x52>;
+			size = <256>;
+			pagesize = <16>;
+			vcc-supply = <&vdd_3v3>;
+
+			nvmem-layout {
+				compatible = "fixed-layout";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				eeprom0_eui48: eui48@fa {
+					reg = <0xfa 0x6>;
+				};
+			};
+		};
+
+		eeprom1: eeprom@53 {
+			compatible = "microchip,24aa025e48";
+			reg = <0x53>;
+			size = <256>;
+			pagesize = <16>;
+			vcc-supply = <&vdd_3v3>;
+
+			nvmem-layout {
+				compatible = "fixed-layout";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				eeprom1_eui48: eui48@fa {
+					reg = <0xfa 0x6>;
+				};
+			};
+		};
+	};
+};
+
+&flx9 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c9: i2c@600 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c9_default>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+	};
+};
+
+&flx11 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+	status = "okay";
+
+	spi11: spi@400 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mikrobus1_spi &pinctrl_mikrobus1_spi_cs>;
+		status = "okay";
+	};
+};
+
+&gmac0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gmac0_default
+		     &pinctrl_gmac0_mdio_default
+		     &pinctrl_gmac0_txck_default
+		     &pinctrl_gmac0_phy_irq>;
+	phy-mode = "rgmii-id";
+	nvmem-cells = <&eeprom0_eui48>;
+	nvmem-cell-names = "mac-address";
+	status = "okay";
+
+	ethernet-phy@7 {
+		reg = <0x7>;
+		interrupt-parent = <&pioA>;
+		interrupts = <PIN_PA31 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&gmac1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gmac1_default
+		     &pinctrl_gmac1_mdio_default
+		     &pinctrl_gmac1_phy_irq>;
+	phy-mode = "rmii";
+	nvmem-cells = <&eeprom1_eui48>;
+	nvmem-cell-names = "mac-address";
+	status = "okay"; /* Conflict with pdmc0. */
+
+	ethernet-phy@0 {
+		reg = <0x0>;
+		interrupt-parent = <&pioA>;
+		interrupts = <PIN_PA21 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2s0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2s0_default>;
+};
+
+&main_xtal {
+	clock-frequency = <24000000>;
+};
+
+&pdmc0 {
+	#sound-dai-cells = <0>;
+	microchip,mic-pos = <MCHP_PDMC_DS0 MCHP_PDMC_CLK_NEGATIVE>, /* MIC 1 */
+			    <MCHP_PDMC_DS1 MCHP_PDMC_CLK_NEGATIVE>, /* MIC 2 */
+			    <MCHP_PDMC_DS0 MCHP_PDMC_CLK_POSITIVE>, /* MIC 3 */
+			    <MCHP_PDMC_DS1 MCHP_PDMC_CLK_POSITIVE>; /* MIC 4 */
+	status = "disabled"; /* Conflict with gmac1. */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pdmc0_default>;
+};
+
+&pioA {
+
+	pinctrl_can0_default: can0_default {
+		pinmux = <PIN_PD12__CANTX0>,
+			 <PIN_PD13__CANRX0 >;
+		bias-disable;
+	};
+
+	pinctrl_can1_default: can1_default {
+		pinmux = <PIN_PD14__CANTX1>,
+			 <PIN_PD15__CANRX1 >;
+		bias-disable;
+	};
+
+	pinctrl_flx0_default: flx0_default {
+		pinmux = <PIN_PE3__FLEXCOM0_IO0>,
+			 <PIN_PE4__FLEXCOM0_IO1>,
+			 <PIN_PE6__FLEXCOM0_IO3>,
+			 <PIN_PE7__FLEXCOM0_IO4>;
+		bias-disable;
+	};
+
+	pinctrl_flx3_default: flx3_default {
+		pinmux = <PIN_PD16__FLEXCOM3_IO0>,
+			 <PIN_PD17__FLEXCOM3_IO1>;
+		bias-pull-up;
+	};
+
+	pinctrl_flx4_default: flx4_default {
+		pinmux = <PIN_PD18__FLEXCOM4_IO0>,
+			 <PIN_PD19__FLEXCOM4_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_flx7_default: flx7_default {
+		pinmux = <PIN_PC23__FLEXCOM7_IO0>,
+			 <PIN_PC24__FLEXCOM7_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_gmac0_default: gmac0_default {
+		pinmux = <PIN_PA16__G0_TX0>,
+			 <PIN_PA17__G0_TX1>,
+			 <PIN_PA26__G0_TX2>,
+			 <PIN_PA27__G0_TX3>,
+			 <PIN_PA19__G0_RX0>,
+			 <PIN_PA20__G0_RX1>,
+			 <PIN_PA28__G0_RX2>,
+			 <PIN_PA29__G0_RX3>,
+			 <PIN_PA15__G0_TXEN>,
+			 <PIN_PA30__G0_RXCK>,
+			 <PIN_PA18__G0_RXDV>,
+			 <PIN_PA25__G0_125CK>;
+		slew-rate = <0>;
+		bias-disable;
+	};
+
+	pinctrl_gmac0_mdio_default: gmac0_mdio_default {
+		pinmux = <PIN_PA22__G0_MDC>,
+			 <PIN_PA23__G0_MDIO>;
+		bias-disable;
+	};
+
+	pinctrl_gmac0_txck_default: gmac0_txck_default {
+		pinmux = <PIN_PA24__G0_TXCK>;
+		slew-rate = <0>;
+		bias-pull-up;
+	};
+
+	pinctrl_gmac0_phy_irq: gmac0_phy_irq {
+		pinmux = <PIN_PA31__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_gmac1_default: gmac1_default {
+		pinmux = <PIN_PD30__G1_TXCK>,
+			 <PIN_PD22__G1_TX0>,
+			 <PIN_PD23__G1_TX1>,
+			 <PIN_PD21__G1_TXEN>,
+			 <PIN_PD25__G1_RX0>,
+			 <PIN_PD26__G1_RX1>,
+			 <PIN_PD27__G1_RXER>,
+			 <PIN_PD24__G1_RXDV>;
+		slew-rate = <0>;
+		bias-disable;
+	};
+
+	pinctrl_gmac1_mdio_default: gmac1_mdio_default {
+		pinmux = <PIN_PD28__G1_MDC>,
+			 <PIN_PD29__G1_MDIO>;
+		bias-disable;
+	};
+
+	pinctrl_gmac1_phy_irq: gmac1_phy_irq {
+		pinmux = <PIN_PA21__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_i2c1_default: i2c1_default {
+		pinmux = <PIN_PC9__FLEXCOM1_IO0>,
+			 <PIN_PC10__FLEXCOM1_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_i2c8_default: i2c8_default {
+		pinmux = <PIN_PC14__FLEXCOM8_IO0>,
+			 <PIN_PC13__FLEXCOM8_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_i2c9_default: i2c9_default {
+		pinmux = <PIN_PC18__FLEXCOM9_IO0>,
+			 <PIN_PC19__FLEXCOM9_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_i2s0_default: i2s0_default {
+		pinmux = <PIN_PB23__I2SMCC0_CK>,
+			 <PIN_PB24__I2SMCC0_WS>,
+			 <PIN_PB25__I2SMCC0_DOUT1>,
+			 <PIN_PB26__I2SMCC0_DOUT0>,
+			 <PIN_PB27__I2SMCC0_MCK>;
+		bias-disable;
+	};
+
+	pinctrl_key_gpio_default: key_gpio_default {
+		pinmux = <PIN_PA12__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_led_gpio_default: led_gpio_default {
+		pinmux = <PIN_PA13__GPIO>,
+			 <PIN_PB8__GPIO>,
+			 <PIN_PD20__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_mikrobus1_an_default: mikrobus1_an_default {
+		pinmux = <PIN_PD0__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_an_default: mikrobus2_an_default {
+		pinmux = <PIN_PD1__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_pwm2_default: mikrobus1_pwm2_default {
+		pinmux = <PIN_PA13__PWMH2>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_pwm3_default: mikrobus2_pwm3_default {
+		pinmux = <PIN_PD20__PWMH3>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_spi_cs: mikrobus1_spi_cs {
+		pinmux = <PIN_PB6__FLEXCOM11_IO3>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_spi: mikrobus1_spi {
+		pinmux = <PIN_PB3__FLEXCOM11_IO0>,
+			 <PIN_PB4__FLEXCOM11_IO1>,
+			 <PIN_PB5__FLEXCOM11_IO2>;
+		bias-disable;
+	};
+
+	pinctrl_pdmc0_default: pdmc0_default {
+		pinmux = <PIN_PD23__PDMC0_DS0>,
+			 <PIN_PD24__PDMC0_DS1>,
+			 <PIN_PD22__PDMC0_CLK>;
+		bias_disable;
+	};
+
+	pinctrl_qspi: qspi {
+		pinmux = <PIN_PB12__QSPI0_IO0>,
+			 <PIN_PB11__QSPI0_IO1>,
+			 <PIN_PB10__QSPI0_IO2>,
+			 <PIN_PB9__QSPI0_IO3>,
+			 <PIN_PB16__QSPI0_IO4>,
+			 <PIN_PB17__QSPI0_IO5>,
+			 <PIN_PB18__QSPI0_IO6>,
+			 <PIN_PB19__QSPI0_IO7>,
+			 <PIN_PB13__QSPI0_CS>,
+			 <PIN_PB14__QSPI0_SCK>,
+			 <PIN_PB15__QSPI0_SCKN>,
+			 <PIN_PB20__QSPI0_DQS>,
+			 <PIN_PB21__QSPI0_INT>;
+		bias-disable;
+		slew-rate = <0>;
+		atmel,drive-strength = <ATMEL_PIO_DRVSTR_ME>;
+	};
+
+	pinctrl_sdmmc0_default: sdmmc0_default {
+		cmd_data {
+			pinmux = <PIN_PA1__SDMMC0_CMD>,
+				 <PIN_PA3__SDMMC0_DAT0>,
+				 <PIN_PA4__SDMMC0_DAT1>,
+				 <PIN_PA5__SDMMC0_DAT2>,
+				 <PIN_PA6__SDMMC0_DAT3>,
+				 <PIN_PA7__SDMMC0_DAT4>,
+				 <PIN_PA8__SDMMC0_DAT5>,
+				 <PIN_PA9__SDMMC0_DAT6>,
+				 <PIN_PA10__SDMMC0_DAT7>;
+			slew-rate = <0>;
+			bias-pull-up;
+		};
+
+		ck_cd_rstn_vddsel {
+			pinmux = <PIN_PA0__SDMMC0_CK>,
+				 <PIN_PA2__SDMMC0_RSTN>,
+				 <PIN_PA11__SDMMC0_DS>;
+			slew-rate = <0>;
+			bias-pull-up;
+		};
+	};
+
+	pinctrl_sdmmc1_default: sdmmc1_default {
+		cmd_data {
+			pinmux = <PIN_PB29__SDMMC1_CMD>,
+				 <PIN_PB31__SDMMC1_DAT0>,
+				 <PIN_PC0__SDMMC1_DAT1>,
+				 <PIN_PC1__SDMMC1_DAT2>,
+				 <PIN_PC2__SDMMC1_DAT3>;
+			slew-rate = <0>;
+			bias-pull-up;
+		};
+
+		ck_cd_rstn_vddsel {
+			pinmux = <PIN_PB30__SDMMC1_CK>,
+				 <PIN_PB28__SDMMC1_RSTN>,
+				 <PIN_PC5__SDMMC1_1V8SEL>,
+				 <PIN_PC4__SDMMC1_CD>;
+			slew-rate = <0>;
+			bias-pull-up;
+		};
+	};
+
+	pinctrl_sdmmc2_default: sdmmc2_default {
+		cmd_data {
+			pinmux = <PIN_PD3__SDMMC2_CMD>,
+				 <PIN_PD5__SDMMC2_DAT0>,
+				 <PIN_PD6__SDMMC2_DAT1>,
+				 <PIN_PD7__SDMMC2_DAT2>,
+				 <PIN_PD8__SDMMC2_DAT3>;
+			slew-rate = <0>;
+			bias-pull-up;
+		};
+
+		ck {
+			pinmux = <PIN_PD4__SDMMC2_CK>;
+			slew-rate = <0>;
+			bias-pull-up;
+		};
+	};
+
+	pinctrl_spdifrx_default: spdifrx_default {
+		pinmux = <PIN_PB0__SPDIF_RX>;
+		bias-disable;
+	};
+
+	pinctrl_spdiftx_default: spdiftx_default {
+		pinmux = <PIN_PB1__SPDIF_TX>;
+		bias-disable;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus1_pwm2_default &pinctrl_mikrobus2_pwm3_default>;
+	status = "disabled"; /* Conflict with leds. */
+};
+
+&rtt {
+	atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+};
+
+&sdmmc0 {
+	bus-width = <8>;
+	non-removable;
+	sdhci-caps-mask = <0x0 0x00200000>;
+	vmmc-supply = <&vdd_3v3>;
+	vqmmc-supply = <&vldo1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default>;
+	status = "okay";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	no-1-8-v;
+	sdhci-caps-mask = <0x0 0x00200000>;
+	vmmc-supply = <&vdd_3v3>;
+	vqmmc-supply = <&vdd_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc1_default>;
+	status = "okay";
+};
+
+&sdmmc2 {
+	bus-width = <4>;
+	no-1-8-v;
+	sdhci-caps-mask = <0x0 0x00200000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc2_default>;
+};
+
+&shdwc {
+	debounce-delay-us = <976>;
+	status = "okay";
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
+&spdifrx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdifrx_default>;
+	status = "okay";
+};
+
+&spdiftx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdiftx_default>;
+	status = "okay";
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&trng {
+	status = "okay";
+};
+
+&vddout25 {
+	vin-supply = <&vdd_3v3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-smartkiz.dts b/arch/arm/boot/dts/microchip/at91-smartkiz.dts
index b76a6b5ac464..b76a6b5ac464 100644
--- a/arch/arm/boot/dts/at91-smartkiz.dts
+++ b/arch/arm/boot/dts/microchip/at91-smartkiz.dts
diff --git a/arch/arm/boot/dts/at91-som60.dtsi b/arch/arm/boot/dts/microchip/at91-som60.dtsi
index 39474a112b16..39474a112b16 100644
--- a/arch/arm/boot/dts/at91-som60.dtsi
+++ b/arch/arm/boot/dts/microchip/at91-som60.dtsi
diff --git a/arch/arm/boot/dts/at91-tse850-3.dts b/arch/arm/boot/dts/microchip/at91-tse850-3.dts
index 3ca97b47c69c..9d58a3931207 100644
--- a/arch/arm/boot/dts/at91-tse850-3.dts
+++ b/arch/arm/boot/dts/microchip/at91-tse850-3.dts
@@ -106,35 +106,35 @@
 	leds {
 		compatible = "gpio-leds";
 
-		ch1-red {
+		led-ch1-red {
 			label = "ch-1:red";
 			gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
 		};
-		ch1-green {
+		led-ch1-green {
 			label = "ch-1:green";
 			gpios = <&pioA 22 GPIO_ACTIVE_LOW>;
 		};
-		ch2-red {
+		led-ch2-red {
 			label = "ch-2:red";
 			gpios = <&pioA 21 GPIO_ACTIVE_LOW>;
 		};
-		ch2-green {
+		led-ch2-green {
 			label = "ch-2:green";
 			gpios = <&pioA 20 GPIO_ACTIVE_LOW>;
 		};
-		data-red {
+		led-data-red {
 			label = "data:red";
 			gpios = <&pioA 19 GPIO_ACTIVE_LOW>;
 		};
-		data-green {
+		led-data-green {
 			label = "data:green";
 			gpios = <&pioA 18 GPIO_ACTIVE_LOW>;
 		};
-		alarm-red {
+		led-alarm-red {
 			label = "alarm:red";
 			gpios = <&pioA 17 GPIO_ACTIVE_LOW>;
 		};
-		alarm-green {
+		led-alarm-green {
 			label = "alarm:green";
 			gpios = <&pioA 16 GPIO_ACTIVE_LOW>;
 		};
@@ -262,7 +262,7 @@
 &macb1 {
 	status = "okay";
 
-	phy-mode = "rgmii";
+	phy-mode = "rmii";
 
 	#address-cells = <1>;
 	#size-cells = <0>;
@@ -300,3 +300,63 @@
 
 	dmas = <0>, <0>;	/*  Do not use DMA for dbgu */
 };
+
+&pioA {
+	gpio-line-names =
+	/*  0 */	"SUP-A", "SUP-B", "SUP-C", "SIG<LEV",
+	/*  4 */	"", "/RFRST", "", "",
+	/*  8 */	"/ADD", "", "/LOOP1", "/LOOP2",
+	/* 12 */	"", "", "", "",
+	/* 16 */	"LED1GREEN", "LED1RED", "LED2GREEN", "LED2RED",
+	/* 20 */	"LED3GREEN", "LED3RED", "LED4GREEN", "LED4RED",
+	/* 24 */	"", "", "", "",
+	/* 28 */	"", "", "SDA", "SCL";
+};
+
+&pioB {
+	gpio-line-names =
+	/*  0 */	"", "", "", "",
+	/*  4 */	"", "", "", "",
+	/*  8 */	"", "", "", "",
+	/* 12 */	"", "", "", "",
+	/* 16 */	"", "", "", "",
+	/* 20 */	"", "", "", "",
+	/* 24 */	"", "", "SIG<LIN", "SIG>LIN",
+	/* 28 */	"RXD", "TXD", "BRX", "BTX";
+};
+
+&pioC {
+	gpio-line-names =
+	/*  0 */	"ETX0", "ETX1", "ERX0", "ERX1",
+	/*  4 */	"ETXEN", "ECRSDV", "ERXER", "EREFCK",
+	/*  8 */	"EMDC", "EMDIO", "", "",
+	/* 12 */	"", "", "", "/ILIM",
+	/* 16 */	"BCK", "LRCK", "DIN", "",
+	/* 20 */	"", "", "", "",
+	/* 24 */	"", "", "", "",
+	/* 28 */	"", "", "", "VBUS";
+};
+
+&pioD {
+	gpio-line-names =
+	/*  0 */	"I1", "I2", "O1", "EXTVEN",
+	/*  4 */	"", "456KHZ", "VCTRL", "SYNCSEL",
+	/*  8 */	"STEREO", "", "", "",
+	/* 12 */	"", "", "", "",
+	/* 16 */	"", ">LIN", "LIN>", "",
+	/* 20 */	"VREFEN", "", "", "",
+	/* 24 */	"", "", "VINOK", "",
+	/* 28 */	"POEOK", "USBON", "POELOAD", "";
+};
+
+&pioE {
+	gpio-line-names =
+	/*  0 */	"", "", "", "",
+	/*  4 */	"", "", "", "",
+	/*  8 */	"", "", "", "",
+	/* 12 */	"", "", "", "",
+	/* 16 */	"", "", "", "",
+	/* 20 */	"", "ALE", "CLE", "",
+	/* 24 */	"", "", "", "",
+	/* 28 */	"", "", "", "/ETHINT";
+};
diff --git a/arch/arm/boot/dts/at91-vinco.dts b/arch/arm/boot/dts/microchip/at91-vinco.dts
index a51a3372afa1..c5fc51667066 100644
--- a/arch/arm/boot/dts/at91-vinco.dts
+++ b/arch/arm/boot/dts/microchip/at91-vinco.dts
@@ -59,7 +59,7 @@
 			spi0: spi@f8010000 {
 				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
 				status = "okay";
-				m25p80@0 {
+				flash@0 {
 					compatible = "n25q32b", "jedec,spi-nor";
 					spi-max-frequency = <50000000>;
 					reg = <0>;
@@ -159,19 +159,19 @@
 			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usba_vbus>;
-			status = "disable";
+			status = "disabled";
 		};
 
-		usb1: ohci@500000 {
+		usb1: usb@500000 {
 			num-ports = <3>;
 			atmel,vbus-gpio = <0
 					   &pioE 11 GPIO_ACTIVE_LOW
 					   &pioE 12 GPIO_ACTIVE_LOW
 					  >;
-			status = "disable";
+			status = "disabled";
 		};
 
-		usb2: ehci@600000 {
+		usb2: usb@600000 {
 			/* 4G Modem */
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/at91-wb45n.dts b/arch/arm/boot/dts/microchip/at91-wb45n.dts
index 54d130c92185..ef73f727f7bd 100644
--- a/arch/arm/boot/dts/at91-wb45n.dts
+++ b/arch/arm/boot/dts/microchip/at91-wb45n.dts
@@ -12,13 +12,10 @@
 	model = "Laird Workgroup Bridge 45N - Atmel AT91SAM (dt)";
 	compatible = "laird,wb45n", "laird,wbxx", "atmel,at91sam9x5", "atmel,at91sam9";
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		irqbtn@18 {
-			reg = <18>;
+		button {
 			label = "IRQBTN";
 			linux,code = <99>;
 			gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/at91-wb45n.dtsi b/arch/arm/boot/dts/microchip/at91-wb45n.dtsi
index 430c75358086..430c75358086 100644
--- a/arch/arm/boot/dts/at91-wb45n.dtsi
+++ b/arch/arm/boot/dts/microchip/at91-wb45n.dtsi
diff --git a/arch/arm/boot/dts/at91-wb50n.dts b/arch/arm/boot/dts/microchip/at91-wb50n.dts
index a5e45bb95c04..ec2becf6133b 100644
--- a/arch/arm/boot/dts/at91-wb50n.dts
+++ b/arch/arm/boot/dts/microchip/at91-wb50n.dts
@@ -13,21 +13,17 @@
 	model = "Laird Workgroup Bridge 50N - Atmel SAMA5D";
 	compatible = "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		btn0@10 {
-			reg = <10>;
+		button-0 {
 			label = "BTNESC";
 			linux,code = <1>; /* ESC button */
 			gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
 			wakeup-source;
 		};
 
-		irqbtn@31 {
-			reg = <31>;
+		button-1 {
 			label = "IRQBTN";
 			linux,code = <99>; /* SysReq button */
 			gpios = <&pioE 31 GPIO_ACTIVE_LOW>;
@@ -90,12 +86,6 @@
 
 &spi1 {
 	status = "okay";
-
-	spidev@0 {
-		compatible = "spidev";
-		reg = <0>;
-		spi-max-frequency = <8000000>;
-	};
 };
 
 &usb0 {
diff --git a/arch/arm/boot/dts/at91-wb50n.dtsi b/arch/arm/boot/dts/microchip/at91-wb50n.dtsi
index 74b249bb6351..74b249bb6351 100644
--- a/arch/arm/boot/dts/at91-wb50n.dtsi
+++ b/arch/arm/boot/dts/microchip/at91-wb50n.dtsi
diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/microchip/at91rm9200.dtsi
index d1181ead18e5..e105ad855ce8 100644
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/microchip/at91rm9200.dtsi
@@ -13,6 +13,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
 	#address-cells = <1>;
@@ -101,7 +102,7 @@
 				reg = <0xffffff00 0x100>;
 			};
 
-			pmc: pmc@fffffc00 {
+			pmc: clock-controller@fffffc00 {
 				compatible = "atmel,at91rm9200-pmc", "syscon";
 				reg = <0xfffffc00 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -134,9 +135,9 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0xfffa0000 0x100>;
-				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0
-					      18 IRQ_TYPE_LEVEL_HIGH 0
-					      19 IRQ_TYPE_LEVEL_HIGH 0>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <18 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <19 IRQ_TYPE_LEVEL_HIGH 0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 19>, <&slow_xtal>;
 				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 			};
@@ -146,9 +147,9 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0xfffa4000 0x100>;
-				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0
-					      21 IRQ_TYPE_LEVEL_HIGH 0
-					      22 IRQ_TYPE_LEVEL_HIGH 0>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <21 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <22 IRQ_TYPE_LEVEL_HIGH 0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&pmc PMC_TYPE_PERIPHERAL 21>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&slow_xtal>;
 				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 			};
@@ -224,7 +225,7 @@
 			pinctrl@fffff400 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				compatible = "atmel,at91rm9200-pinctrl", "simple-mfd";
 				ranges = <0xfffff400 0xfffff400 0x800>;
 
 				atmel,mux-mask = <
@@ -596,6 +597,7 @@
 			dbgu: serial@fffff200 {
 				compatible = "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart";
 				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
@@ -607,6 +609,7 @@
 			usart0: serial@fffc0000 {
 				compatible = "atmel,at91rm9200-usart";
 				reg = <0xfffc0000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -620,6 +623,7 @@
 			usart1: serial@fffc4000 {
 				compatible = "atmel,at91rm9200-usart";
 				reg = <0xfffc4000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -633,6 +637,7 @@
 			usart2: serial@fffc8000 {
 				compatible = "atmel,at91rm9200-usart";
 				reg = <0xfffc8000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -646,6 +651,7 @@
 			usart3: serial@fffcc000 {
 				compatible = "atmel,at91rm9200-usart";
 				reg = <0xfffcc000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -660,7 +666,7 @@
 				compatible = "atmel,at91rm9200-udc";
 				reg = <0xfffb0000 0x4000>;
 				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 2>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>, <&pmc PMC_TYPE_SYSTEM 2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>, <&pmc PMC_TYPE_SYSTEM 1>;
 				clock-names = "pclk", "hclk";
 				status = "disabled";
 			};
@@ -696,7 +702,7 @@
 			status = "disabled";
 		};
 
-		usb0: ohci@300000 {
+		usb0: usb@300000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00300000 0x100000>;
 			interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -708,9 +714,8 @@
 
 	i2c-gpio-0 {
 		compatible = "i2c-gpio";
-		gpios = <&pioA 25 GPIO_ACTIVE_HIGH /* sda */
-			 &pioA 26 GPIO_ACTIVE_HIGH /* scl */
-			>;
+		sda-gpios = <&pioA 25 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&pioA 26 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
diff --git a/arch/arm/boot/dts/at91rm9200_pqfp.dtsi b/arch/arm/boot/dts/microchip/at91rm9200_pqfp.dtsi
index c3d4177b9823..c3d4177b9823 100644
--- a/arch/arm/boot/dts/at91rm9200_pqfp.dtsi
+++ b/arch/arm/boot/dts/microchip/at91rm9200_pqfp.dtsi
diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/microchip/at91rm9200ek.dts
index e1ef4e44e663..ce691c4692b9 100644
--- a/arch/arm/boot/dts/at91rm9200ek.dts
+++ b/arch/arm/boot/dts/microchip/at91rm9200ek.dts
@@ -73,7 +73,7 @@
 			spi0: spi@fffe0000 {
 				status = "okay";
 				cs-gpios = <&pioA 3 0>, <0>, <0>, <0>;
-				mtd_dataflash@0 {
+				flash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					spi-max-frequency = <15000000>;
 					reg = <0>;
@@ -89,12 +89,12 @@
 			};
 		};
 
-		usb0: ohci@300000 {
+		usb0: usb@300000 {
 			num-ports = <2>;
 			status = "okay";
 		};
 
-		nor_flash@10000000 {
+		flash@10000000 {
 			compatible = "cfi-flash";
 			reg = <0x10000000 0x800000>;
 			linux,mtd-name = "physmap-flash.0";
@@ -127,19 +127,19 @@
 	leds {
 		compatible = "gpio-leds";
 
-		ds2 {
+		led-ds2 {
 			label = "green";
 			gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "mmc0";
 		};
 
-		ds4 {
+		led-ds4 {
 			label = "yellow";
 			gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		ds6 {
+		led-ds6 {
 			label = "red";
 			gpios = <&pioB 2 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/microchip/at91sam9260.dtsi
index 019f1c3d4d30..fc0b6a73204f 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9260.dtsi
@@ -11,6 +11,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
 	#address-cells = <1>;
@@ -64,7 +65,7 @@
 			clock-frequency = <0>;
 		};
 
-		adc_op_clk: adc_op_clk{
+		adc_op_clk: adc_op_clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <5000000>;
@@ -114,7 +115,7 @@
 				reg = <0xffffee00 0x200>;
 			};
 
-			pmc: pmc@fffffc00 {
+			pmc: clock-controller@fffffc00 {
 				compatible = "atmel,at91sam9260-pmc", "syscon";
 				reg = <0xfffffc00 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -123,13 +124,13 @@
 				clock-names = "slow_xtal", "main_xtal";
 			};
 
-			rstc@fffffd00 {
+			reset-controller@fffffd00 {
 				compatible = "atmel,at91sam9260-rstc";
 				reg = <0xfffffd00 0x10>;
 				clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>;
 			};
 
-			shdwc@fffffd10 {
+			shdwc: poweroff@fffffd10 {
 				compatible = "atmel,at91sam9260-shdwc";
 				reg = <0xfffffd10 0x10>;
 				clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>;
@@ -147,9 +148,9 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0xfffa0000 0x100>;
-				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0
-					      18 IRQ_TYPE_LEVEL_HIGH 0
-					      19 IRQ_TYPE_LEVEL_HIGH 0>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <18 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <19 IRQ_TYPE_LEVEL_HIGH 0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 19>, <&pmc PMC_TYPE_CORE PMC_SLOW>;
 				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 			};
@@ -159,17 +160,17 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0xfffdc000 0x100>;
-				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0
-					      27 IRQ_TYPE_LEVEL_HIGH 0
-					      28 IRQ_TYPE_LEVEL_HIGH 0>;
+				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <27 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <28 IRQ_TYPE_LEVEL_HIGH 0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_PERIPHERAL 28>, <&pmc PMC_TYPE_CORE PMC_SLOW>;
 				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 			};
 
-			pinctrl@fffff400 {
+			pinctrl: pinctrl@fffff400 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				compatible = "atmel,at91rm9200-pinctrl", "simple-mfd";
 				ranges = <0xfffff400 0xfffff400 0x600>;
 
 				atmel,mux-mask = <
@@ -532,6 +533,7 @@
 			dbgu: serial@fffff200 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
@@ -543,6 +545,7 @@
 			usart0: serial@fffb0000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb0000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -556,6 +559,7 @@
 			usart1: serial@fffb4000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb4000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -569,6 +573,7 @@
 			usart2: serial@fffb8000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb8000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -582,6 +587,7 @@
 			usart3: serial@fffd0000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffd0000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -595,6 +601,7 @@
 			uart0: serial@fffd4000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffd4000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -608,6 +615,7 @@
 			uart1: serial@fffd8000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffd8000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -734,7 +742,7 @@
 			};
 		};
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00500000 0x100000>;
 			interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -773,9 +781,8 @@
 
 	i2c_gpio0: i2c-gpio-0 {
 		compatible = "i2c-gpio";
-		gpios = <&pioA 23 GPIO_ACTIVE_HIGH /* sda */
-			 &pioA 24 GPIO_ACTIVE_HIGH /* scl */
-			>;
+		sda-gpios = <&pioA 23 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&pioA 24 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
diff --git a/arch/arm/boot/dts/at91sam9260ek.dts b/arch/arm/boot/dts/microchip/at91sam9260ek.dts
index ce96345d28a3..8522a210b484 100644
--- a/arch/arm/boot/dts/at91sam9260ek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9260ek.dts
@@ -92,7 +92,7 @@
 
 			spi0: spi@fffc8000 {
 				cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
-				mtd_dataflash@1 {
+				flash@1 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					spi-max-frequency = <50000000>;
 					reg = <1>;
@@ -112,7 +112,7 @@
 				};
 			};
 
-			shdwc@fffffd10 {
+			shdwc: poweroff@fffffd10 {
 				atmel,wakeup-counter = <10>;
 				atmel,wakeup-rtt-timer;
 			};
@@ -131,7 +131,7 @@
 			};
 		};
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
@@ -144,17 +144,17 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		btn3 {
+		button-3 {
 			label = "Button 3";
 			gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
 			linux,code = <0x103>;
 			wakeup-source;
 		};
 
-		btn4 {
+		button-4 {
 			label = "Button 4";
 			gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_PROG1>;
@@ -165,7 +165,7 @@
 	i2c-gpio-0 {
 		status = "okay";
 
-		24c512@50 {
+		eeprom@50 {
 			compatible = "atmel,24c512";
 			reg = <0x50>;
 		};
@@ -174,13 +174,13 @@
 	leds {
 		compatible = "gpio-leds";
 
-		ds1 {
+		led-ds1 {
 			label = "ds1";
 			gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		ds5 {
+		led-ds5 {
 			label = "ds5";
 			gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/microchip/at91sam9261.dtsi
index 7adc36ca8a46..d1d678b77e84 100644
--- a/arch/arm/boot/dts/at91sam9261.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9261.dtsi
@@ -9,6 +9,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
 	#address-cells = <1>;
@@ -76,7 +77,7 @@
 		#size-cells = <1>;
 		ranges;
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00500000 0x100000>;
 			interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -179,6 +180,7 @@
 			usart0: serial@fffb0000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb0000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -192,6 +194,7 @@
 			usart1: serial@fffb4000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb4000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -202,9 +205,10 @@
 				status = "disabled";
 			};
 
-			usart2: serial@fffb8000{
+			usart2: serial@fffb8000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb8000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -301,6 +305,7 @@
 			dbgu: serial@fffff200 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
@@ -312,7 +317,7 @@
 			pinctrl@fffff400 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				compatible = "atmel,at91rm9200-pinctrl", "simple-mfd";
 				ranges = <0xfffff400 0xfffff400 0x600>;
 
 				atmel,mux-mask =
@@ -594,7 +599,7 @@
 				};
 			};
 
-			pmc: pmc@fffffc00 {
+			pmc: clock-controller@fffffc00 {
 				compatible = "atmel,at91sam9261-pmc", "syscon";
 				reg = <0xfffffc00 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -603,13 +608,13 @@
 				clock-names = "slow_xtal", "main_xtal";
 			};
 
-			rstc@fffffd00 {
+			reset-controller@fffffd00 {
 				compatible = "atmel,at91sam9260-rstc";
 				reg = <0xfffffd00 0x10>;
 				clocks = <&slow_xtal>;
 			};
 
-			shdwc@fffffd10 {
+			poweroff@fffffd10 {
 				compatible = "atmel,at91sam9260-shdwc";
 				reg = <0xfffffd10 0x10>;
 				clocks = <&slow_xtal>;
@@ -650,8 +655,8 @@
 		compatible = "i2c-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c_bitbang>;
-		gpios = <&pioA 7 GPIO_ACTIVE_HIGH>, /* sda */
-			<&pioA 8 GPIO_ACTIVE_HIGH>; /* scl */
+		sda-gpios = <&pioA 7 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&pioA 8 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/microchip/at91sam9261ek.dts
index beed819609e8..313bc2797fde 100644
--- a/arch/arm/boot/dts/at91sam9261ek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9261ek.dts
@@ -31,7 +31,7 @@
 	};
 
 	ahb {
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			status = "okay";
 		};
 
@@ -145,7 +145,7 @@
 				cs-gpios = <&pioA 3 0>, <0>, <&pioA 28 0>, <0>;
 				status = "okay";
 
-				mtd_dataflash@0 {
+				flash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					reg = <0>;
 					spi-max-frequency = <15000000>;
@@ -156,7 +156,7 @@
 					compatible = "ti,ads7843";
 					interrupts-extended = <&pioC 2 IRQ_TYPE_EDGE_BOTH>;
 					spi-max-frequency = <3000000>;
-					pendown-gpio = <&pioC 2 GPIO_ACTIVE_HIGH>;
+					pendown-gpio = <&pioC 2 GPIO_ACTIVE_LOW>;
 
 					ti,x-min = /bits/ 16 <150>;
 					ti,x-max = /bits/ 16 <3830>;
@@ -178,6 +178,10 @@
 				status = "okay";
 			};
 
+			rtc@fffffd20 {
+				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+			};
+
 			watchdog@fffffd40 {
 				status = "okay";
 			};
@@ -188,50 +192,50 @@
 	leds {
 		compatible = "gpio-leds";
 
-		ds8 {
+		led-ds8 {
 			label = "ds8";
 			gpios = <&pioA 13 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		ds7 {
+		led-ds7 {
 			label = "ds7";
 			gpios = <&pioA 14 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "nand-disk";
 		};
 
-		ds1 {
+		led-ds1 {
 			label = "ds1";
 			gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		button_0 {
+		button-0 {
 			label = "button_0";
 			gpios = <&pioA 27 GPIO_ACTIVE_LOW>;
 			linux,code = <256>;
 			wakeup-source;
 		};
 
-		button_1 {
+		button-1 {
 			label = "button_1";
 			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
 			linux,code = <257>;
 			wakeup-source;
 		};
 
-		button_2 {
+		button-2 {
 			label = "button_2";
 			gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
 			linux,code = <258>;
 			wakeup-source;
 		};
 
-		button_3 {
+		button-3 {
 			label = "button_3";
 			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
 			linux,code = <259>;
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/microchip/at91sam9263.dtsi
index fe45d96239c9..a4b5d1f228f9 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9263.dtsi
@@ -9,6 +9,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
 	#address-cells = <1>;
@@ -100,7 +101,7 @@
 				atmel,external-irqs = <30 31>;
 			};
 
-			pmc: pmc@fffffc00 {
+			pmc: clock-controller@fffffc00 {
 				compatible = "atmel,at91sam9263-pmc", "syscon";
 				reg = <0xfffffc00 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -151,13 +152,13 @@
 				clock-names = "t0_clk", "slow_clk";
 			};
 
-			rstc@fffffd00 {
+			reset-controller@fffffd00 {
 				compatible = "atmel,at91sam9260-rstc";
 				reg = <0xfffffd00 0x10>;
 				clocks = <&slow_xtal>;
 			};
 
-			shdwc@fffffd10 {
+			poweroff@fffffd10 {
 				compatible = "atmel,at91sam9260-shdwc";
 				reg = <0xfffffd10 0x10>;
 				clocks = <&slow_xtal>;
@@ -166,7 +167,7 @@
 			pinctrl@fffff200 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				compatible = "atmel,at91rm9200-pinctrl", "simple-mfd";
 				ranges = <0xfffff200 0xfffff200 0xa00>;
 
 				atmel,mux-mask = <
@@ -540,6 +541,7 @@
 			dbgu: serial@ffffee00 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xffffee00 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
@@ -551,6 +553,7 @@
 			usart0: serial@fff8c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff8c000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -564,6 +567,7 @@
 			usart1: serial@fff90000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff90000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -577,6 +581,7 @@
 			usart2: serial@fff94000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff94000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -763,7 +768,7 @@
 			status = "disabled";
 		};
 
-		usb0: ohci@a00000 {
+		usb0: usb@a00000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00a00000 0x100000>;
 			interrupts = <29 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -821,9 +826,8 @@
 
 	i2c-gpio-0 {
 		compatible = "i2c-gpio";
-		gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */
-			 &pioB 5 GPIO_ACTIVE_HIGH /* scl */
-			>;
+		sda-gpios = <&pioB 4 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&pioB 5 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/microchip/at91sam9263ek.dts
index 71f60576761a..93c5268a0845 100644
--- a/arch/arm/boot/dts/at91sam9263ek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9263ek.dts
@@ -95,13 +95,17 @@
 			spi0: spi@fffa4000 {
 				status = "okay";
 				cs-gpios = <&pioA 5 0>, <0>, <0>, <0>;
-				mtd_dataflash@0 {
+				flash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					spi-max-frequency = <50000000>;
 					reg = <0>;
 				};
 			};
 
+			rtc@fffffd20 {
+				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+			};
+
 			watchdog@fffffd40 {
 				status = "okay";
 			};
@@ -148,7 +152,7 @@
 				nand@3 {
 					reg = <0x3 0x0 0x800000>;
 					rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>;
-					cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
 					nand-bus-width = <8>;
 					nand-ecc-mode = "soft";
 					nand-on-flash-bbt;
@@ -203,7 +207,7 @@
 			};
 		};
 
-		usb0: ohci@a00000 {
+		usb0: usb@a00000 {
 			num-ports = <2>;
 			status = "okay";
 			atmel,vbus-gpio = <&pioA 24 GPIO_ACTIVE_HIGH
@@ -215,30 +219,30 @@
 	leds {
 		compatible = "gpio-leds";
 
-		d3 {
+		led-d3 {
 			label = "d3";
 			gpios = <&pioB 7 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		d2 {
+		led-d2 {
 			label = "d2";
 			gpios = <&pioC 29 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "nand-disk";
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		left_click {
+		button-left-click {
 			label = "left_click";
 			gpios = <&pioC 5 GPIO_ACTIVE_LOW>;
 			linux,code = <272>;
 			wakeup-source;
 		};
 
-		right_click {
+		button-right-click {
 			label = "right_click";
 			gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
 			linux,code = <273>;
@@ -249,7 +253,7 @@
 	i2c-gpio-0 {
 		status = "okay";
 
-		24c512@50 {
+		eeprom@50 {
 			compatible = "atmel,24c512";
 			reg = <0x50>;
 			pagesize = <128>;
diff --git a/arch/arm/boot/dts/at91sam9g15.dtsi b/arch/arm/boot/dts/microchip/at91sam9g15.dtsi
index dde88276fe52..dde88276fe52 100644
--- a/arch/arm/boot/dts/at91sam9g15.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9g15.dtsi
diff --git a/arch/arm/boot/dts/at91sam9g15ek.dts b/arch/arm/boot/dts/microchip/at91sam9g15ek.dts
index 889a5097eb2d..889a5097eb2d 100644
--- a/arch/arm/boot/dts/at91sam9g15ek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9g15ek.dts
diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/microchip/at91sam9g20.dtsi
index 708e1646b7f4..738a43ffd228 100644
--- a/arch/arm/boot/dts/at91sam9g20.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9g20.dtsi
@@ -41,7 +41,7 @@
 				atmel,adc-startup-time = <40>;
 			};
 
-			pmc: pmc@fffffc00 {
+			pmc: clock-controller@fffffc00 {
 				compatible = "atmel,at91sam9g20-pmc", "atmel,at91sam9260-pmc", "syscon";
 			};
 		};
diff --git a/arch/arm/boot/dts/at91sam9g20ek.dts b/arch/arm/boot/dts/microchip/at91sam9g20ek.dts
index 6de7a7cd3c07..1e62fd371ddb 100644
--- a/arch/arm/boot/dts/at91sam9g20ek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9g20ek.dts
@@ -14,13 +14,13 @@
 	leds {
 		compatible = "gpio-leds";
 
-		ds1 {
+		led-ds1 {
 			label = "ds1";
 			gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		ds5 {
+		led-ds5 {
 			label = "ds5";
 			gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts b/arch/arm/boot/dts/microchip/at91sam9g20ek_2mmc.dts
index 2db95e8ffc64..3e5eab57d1a5 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9g20ek_2mmc.dts
@@ -12,7 +12,7 @@
 	compatible = "atmel,at91sam9g20ek_2mmc", "atmel,at91sam9g20", "atmel,at91sam9";
 
 	ahb {
-		apb{
+		apb {
 			mmc0: mmc@fffa8000 {
 				/* clk already mux wuth slot0 */
 				pinctrl-0 = <
@@ -40,13 +40,13 @@
 	leds {
 		compatible = "gpio-leds";
 
-		ds1 {
+		led-ds1 {
 			label = "ds1";
 			gpios = <&pioB 9 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		ds5 {
+		led-ds5 {
 			label = "ds5";
 			gpios = <&pioB 8 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/microchip/at91sam9g20ek_common.dtsi
index 87bb39060e8b..84a7287107f8 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9g20ek_common.dtsi
@@ -39,6 +39,13 @@
 
 				};
 
+				usb1 {
+					pinctrl_usb1_vbus_gpio: usb1_vbus_gpio {
+						atmel,pins =
+							<AT91_PIOC 5 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;	/* PC5 GPIO */
+					};
+				};
+
 				mmc0_slot1 {
 					pinctrl_board_mmc0_slot1: mmc0_slot1-board {
 						atmel,pins =
@@ -84,6 +91,8 @@
 			};
 
 			usb1: gadget@fffa4000 {
+				pinctrl-0 = <&pinctrl_usb1_vbus_gpio>;
+				pinctrl-names = "default";
 				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
 				status = "okay";
 			};
@@ -110,14 +119,14 @@
 
 			spi0: spi@fffc8000 {
 				cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
-				mtd_dataflash@1 {
+				flash@1 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					spi-max-frequency = <50000000>;
 					reg = <1>;
 				};
 			};
 
-			shdwc@fffffd10 {
+			shdwc: poweroff@fffffd10 {
 				atmel,wakeup-counter = <10>;
 				atmel,wakeup-rtt-timer;
 			};
@@ -202,7 +211,7 @@
 			};
 		};
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
@@ -211,28 +220,40 @@
 	i2c-gpio-0 {
 		status = "okay";
 
-		24c512@50 {
+		eeprom@50 {
 			compatible = "atmel,24c512";
 			reg = <0x50>;
+			vcc-supply = <&reg_3v3>;
 		};
 
 		wm8731: wm8731@1b {
 			compatible = "wm8731";
 			reg = <0x1b>;
+
+			/* PCK0 at 12MHz */
+			clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+			clock-names = "mclk";
+			assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+			assigned-clock-rates = <12000000>;
+
+			HPVDD-supply = <&vcc_dac>;
+			AVDD-supply = <&vcc_dac>;
+			DCVDD-supply = <&reg_3v3>;
+			DBVDD-supply = <&reg_3v3>;
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		btn3 {
+		button-3 {
 			label = "Button 3";
 			gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
 			linux,code = <0x103>;
 			wakeup-source;
 		};
 
-		btn4 {
+		button-4 {
 			label = "Button 4";
 			gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_PROG1>;
@@ -254,4 +275,35 @@
 		atmel,ssc-controller = <&ssc0>;
 		atmel,audio-codec = <&wm8731>;
 	};
+
+	reg_5v: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_3v3: fixedregulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		vin-supply = <&reg_5v>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_1v: fixedregulator2 {
+		compatible = "regulator-fixed";
+		regulator-name = "1V";
+		vin-supply = <&reg_5v>;
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+	};
+
+	vcc_dac: fixedregulator3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_DAC";
+		vin-supply = <&reg_3v3>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 };
diff --git a/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts b/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts
index 7da70aeeb528..947c011c1b00 100644
--- a/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts
@@ -23,7 +23,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user_btn1 {
+		button {
 			label = "USER_BTN1";
 			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_PROG1>;
@@ -37,71 +37,71 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power_blue {
+		led-power-blue {
 			label = "smartgw:power:blue";
 			gpios = <&pioC 21 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		power_green {
+		led-power-green {
 			label = "smartgw:power:green";
 			gpios = <&pioC 20 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
+			linux,default-trigger = "timer";
 		};
 
-		power_red {
+		led-power-red {
 			label = "smartgw:power:red";
 			gpios = <&pioC 19 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		radio_blue {
+		led-radio-blue {
 			label = "smartgw:radio:blue";
 			gpios = <&pioC 18 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		radio_green {
+		led-radio-green {
 			label = "smartgw:radio:green";
 			gpios = <&pioC 17 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		radio_red {
+		led-radio-red {
 			label = "smartgw:radio:red";
 			gpios = <&pioC 16 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		internet_blue {
+		led-internet-blue {
 			label = "smartgw:internet:blue";
 			gpios = <&pioC 15 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		internet_green {
+		led-internet-green {
 			label = "smartgw:internet:green";
 			gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		internet_red {
+		led-internet-red {
 			label = "smartgw:internet:red";
 			gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		heartbeat {
+		led-heartbeat {
 			label = "smartgw:heartbeat";
 			gpios = <&pioB 8 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		pb18 {
+		led-pb18 {
 			status = "disabled";
 		};
 
-		pd21 {
+		led-pd21 {
 			status = "disabled";
 		};
 	};
@@ -121,6 +121,8 @@
 };
 
 &usart3 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
 	status = "okay";
 
 	pinctrl-0 = <&pinctrl_usart3
diff --git a/arch/arm/boot/dts/at91sam9g25.dtsi b/arch/arm/boot/dts/microchip/at91sam9g25.dtsi
index d2f13afb35ea..ec3c77221881 100644
--- a/arch/arm/boot/dts/at91sam9g25.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9g25.dtsi
@@ -26,7 +26,7 @@
 				      >;
 			};
 
-			pmc: pmc@fffffc00 {
+			pmc: clock-controller@fffffc00 {
 				compatible = "atmel,at91sam9g25-pmc", "atmel,at91sam9x5-pmc", "syscon";
 			};
 		};
diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/microchip/at91sam9g25ek.dts
index 61b0bdb615dc..61b0bdb615dc 100644
--- a/arch/arm/boot/dts/at91sam9g25ek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9g25ek.dts
diff --git a/arch/arm/boot/dts/at91sam9g35.dtsi b/arch/arm/boot/dts/microchip/at91sam9g35.dtsi
index 48c2bc4a7753..c9cfb93092ee 100644
--- a/arch/arm/boot/dts/at91sam9g35.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9g35.dtsi
@@ -25,7 +25,7 @@
 				      >;
 			};
 
-			pmc: pmc@fffffc00 {
+			pmc: clock-controller@fffffc00 {
 				compatible = "atmel,at91sam9g35-pmc", "atmel,at91sam9x5-pmc", "syscon";
 			};
 		};
diff --git a/arch/arm/boot/dts/at91sam9g35ek.dts b/arch/arm/boot/dts/microchip/at91sam9g35ek.dts
index f966b56de63c..f966b56de63c 100644
--- a/arch/arm/boot/dts/at91sam9g35ek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9g35ek.dts
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/microchip/at91sam9g45.dtsi
index 2ab730fd6472..4e00ed2d3ecd 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9g45.dtsi
@@ -13,6 +13,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
 	#address-cells = <1>;
@@ -69,7 +70,7 @@
 			clock-frequency = <0>;
 		};
 
-		adc_op_clk: adc_op_clk{
+		adc_op_clk: adc_op_clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <300000>;
@@ -128,7 +129,7 @@
 				reg = <0xffffea00 0x200>;
 			};
 
-			pmc: pmc@fffffc00 {
+			pmc: clock-controller@fffffc00 {
 				compatible = "atmel,at91sam9g45-pmc", "syscon";
 				reg = <0xfffffc00 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -137,7 +138,7 @@
 				clock-names = "slow_clk", "main_xtal";
 			};
 
-			rstc@fffffd00 {
+			reset-controller@fffffd00 {
 				compatible = "atmel,at91sam9g45-rstc";
 				reg = <0xfffffd00 0x10>;
 				clocks = <&clk32k>;
@@ -151,7 +152,7 @@
 			};
 
 
-			shdwc@fffffd10 {
+			poweroff@fffffd10 {
 				compatible = "atmel,at91sam9rl-shdwc";
 				reg = <0xfffffd10 0x10>;
 				clocks = <&clk32k>;
@@ -189,7 +190,7 @@
 			pinctrl@fffff200 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				compatible = "atmel,at91rm9200-pinctrl", "simple-mfd";
 				ranges = <0xfffff200 0xfffff200 0xa00>;
 
 				atmel,mux-mask = <
@@ -675,6 +676,7 @@
 
 			dbgu: serial@ffffee00 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				reg = <0xffffee00 0x200>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
@@ -687,6 +689,7 @@
 			usart0: serial@fff8c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff8c000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -700,6 +703,7 @@
 			usart1: serial@fff90000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff90000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -713,6 +717,7 @@
 			usart2: serial@fff94000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff94000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -726,6 +731,7 @@
 			usart3: serial@fff98000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff98000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -747,7 +753,7 @@
 				status = "disabled";
 			};
 
-			trng@fffcc000 {
+			trng: rng@fffcc000 {
 				compatible = "atmel,at91sam9g45-trng";
 				reg = <0xfffcc000 0x100>;
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -917,7 +923,7 @@
 				status = "disabled";
 			};
 
-			clk32k: sckc@fffffd50 {
+			clk32k: clock-controller@fffffd50 {
 				compatible = "atmel,at91sam9x5-sckc";
 				reg = <0xfffffd50 0x4>;
 				clocks = <&slow_xtal>;
@@ -958,7 +964,7 @@
 			status = "disabled";
 		};
 
-		usb0: ohci@700000 {
+		usb0: usb@700000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00700000 0x100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -967,7 +973,7 @@
 			status = "disabled";
 		};
 
-		usb1: ehci@800000 {
+		usb1: usb@800000 {
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00800000 0x100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -1004,9 +1010,8 @@
 
 	i2c-gpio-0 {
 		compatible = "i2c-gpio";
-		gpios = <&pioA 20 GPIO_ACTIVE_HIGH /* sda */
-			 &pioA 21 GPIO_ACTIVE_HIGH /* scl */
-			>;
+		sda-gpios = <&pioA 20 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&pioA 21 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;
 		i2c-gpio,delay-us = <5>;	/* ~100 kHz */
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/microchip/at91sam9m10g45ek.dts
index b6256a20fbc7..2a31b2f14893 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9m10g45ek.dts
@@ -164,10 +164,10 @@
 				};
 			};
 
-			spi0: spi@fffa4000{
+			spi0: spi@fffa4000 {
 				status = "okay";
 				cs-gpios = <&pioB 3 0>, <0>, <0>, <0>;
-				mtd_dataflash@0 {
+				flash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					spi-max-frequency = <13000000>;
 					reg = <0>;
@@ -303,14 +303,14 @@
 			};
 		};
 
-		usb0: ohci@700000 {
+		usb0: usb@700000 {
 			status = "okay";
 			num-ports = <2>;
 			atmel,vbus-gpio = <&pioD 1 GPIO_ACTIVE_LOW
 					   &pioD 3 GPIO_ACTIVE_LOW>;
 		};
 
-		usb1: ehci@800000 {
+		usb1: usb@800000 {
 			status = "okay";
 		};
 	};
@@ -343,48 +343,48 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		left_click {
+		button-left-click {
 			label = "left_click";
 			gpios = <&pioB 6 GPIO_ACTIVE_LOW>;
 			linux,code = <272>;
 			wakeup-source;
 		};
 
-		right_click {
+		button-right-click {
 			label = "right_click";
 			gpios = <&pioB 7 GPIO_ACTIVE_LOW>;
 			linux,code = <273>;
 			wakeup-source;
 		};
 
-		left {
+		button-left {
 			label = "Joystick Left";
 			gpios = <&pioB 14 GPIO_ACTIVE_LOW>;
 			linux,code = <105>;
 		};
 
-		right {
+		button-right {
 			label = "Joystick Right";
 			gpios = <&pioB 15 GPIO_ACTIVE_LOW>;
 			linux,code = <106>;
 		};
 
-		up {
+		button-up {
 			label = "Joystick Up";
 			gpios = <&pioB 16 GPIO_ACTIVE_LOW>;
 			linux,code = <103>;
 		};
 
-		down {
+		button-down {
 			label = "Joystick Down";
 			gpios = <&pioB 17 GPIO_ACTIVE_LOW>;
 			linux,code = <108>;
 		};
 
-		enter {
+		button-enter {
 			label = "Joystick Press";
 			gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
 			linux,code = <28>;
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/microchip/at91sam9n12.dtsi
index 0785389f5507..af41c3dbb4bf 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9n12.dtsi
@@ -11,6 +11,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
 	#address-cells = <1>;
@@ -117,7 +118,7 @@
 				reg = <0xffffea00 0x200>;
 			};
 
-			pmc: pmc@fffffc00 {
+			pmc: clock-controller@fffffc00 {
 				compatible = "atmel,at91sam9n12-pmc", "syscon";
 				reg = <0xfffffc00 0x200>;
 				#clock-cells = <2>;
@@ -126,7 +127,7 @@
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 			};
 
-			rstc@fffffe00 {
+			reset-controller@fffffe00 {
 				compatible = "atmel,at91sam9g45-rstc";
 				reg = <0xfffffe00 0x10>;
 				clocks = <&clk32k>;
@@ -139,34 +140,17 @@
 				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
 			};
 
-			shdwc@fffffe10 {
+			poweroff@fffffe10 {
 				compatible = "atmel,at91sam9x5-shdwc";
 				reg = <0xfffffe10 0x10>;
 				clocks = <&clk32k>;
 			};
 
-			sckc@fffffe50 {
+			clk32k: clock-controller@fffffe50 {
 				compatible = "atmel,at91sam9x5-sckc";
 				reg = <0xfffffe50 0x4>;
-
-				slow_osc: slow_osc {
-					compatible = "atmel,at91sam9x5-clk-slow-osc";
-					#clock-cells = <0>;
-					clocks = <&slow_xtal>;
-				};
-
-				slow_rc_osc: slow_rc_osc {
-					compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
-					#clock-cells = <0>;
-					clock-frequency = <32768>;
-					clock-accuracy = <50000000>;
-				};
-
-				clk32k: slck {
-					compatible = "atmel,at91sam9x5-clk-slow";
-					#clock-cells = <0>;
-					clocks = <&slow_rc_osc>, <&slow_osc>;
-				};
+				clocks = <&slow_xtal>;
+				#clock-cells = <0>;
 			};
 
 			mmc0: mmc@f0008000 {
@@ -242,7 +226,7 @@
 			pinctrl@fffff400 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
+				compatible = "atmel,at91sam9x5-pinctrl", "simple-mfd";
 				ranges = <0xfffff400 0xfffff400 0x800>;
 
 				atmel,mux-mask = <
@@ -593,6 +577,7 @@
 			dbgu: serial@fffff200 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
@@ -618,6 +603,7 @@
 			usart0: serial@f801c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf801c000 0x4000>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart0>;
@@ -629,6 +615,7 @@
 			usart1: serial@f8020000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8020000 0x4000>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart1>;
@@ -640,6 +627,7 @@
 			usart2: serial@f8024000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8024000 0x4000>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart2>;
@@ -651,6 +639,7 @@
 			usart3: serial@f8028000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8028000 0x4000>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart3>;
@@ -759,7 +748,7 @@
 			};
 		};
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00500000 0x00100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -797,9 +786,8 @@
 
 	i2c-gpio-0 {
 		compatible = "i2c-gpio";
-		gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */
-			 &pioA 31 GPIO_ACTIVE_HIGH /* scl */
-			>;
+		sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/microchip/at91sam9n12ek.dts
index 2bc4e6e0a923..b06a54e8e237 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9n12ek.dts
@@ -119,7 +119,7 @@
 			spi0: spi@f0000000 {
 				status = "okay";
 				cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
-				m25p80@0 {
+				flash@0 {
 					compatible = "atmel,at25df321a";
 					spi-max-frequency = <50000000>;
 					reg = <0>;
@@ -180,7 +180,7 @@
 			};
 		};
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			num-ports = <1>;
 			atmel,vbus-gpio = <&pioB 7 GPIO_ACTIVE_LOW>;
 			status = "okay";
@@ -207,29 +207,29 @@
 	leds {
 		compatible = "gpio-leds";
 
-		d8 {
+		led-d8 {
 			label = "d8";
 			gpios = <&pioB 4 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "mmc0";
 		};
 
-		d9 {
+		led-d9 {
 			label = "d9";
 			gpios = <&pioB 5 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "nand-disk";
 		};
 
-		d10 {
+		led-d10 {
 			label = "d10";
 			gpios = <&pioB 6 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		enter {
+		button-enter {
 			label = "Enter";
 			gpios = <&pioB 3 GPIO_ACTIVE_LOW>;
 			linux,code = <28>;
diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/microchip/at91sam9rl.dtsi
index 730d1182c73e..de74cf2980a0 100644
--- a/arch/arm/boot/dts/at91sam9rl.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9rl.dtsi
@@ -11,6 +11,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
 	#address-cells = <1>;
@@ -66,7 +67,7 @@
 			clock-frequency = <0>;
 		};
 
-		adc_op_clk: adc_op_clk{
+		adc_op_clk: adc_op_clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <1000000>;
@@ -175,6 +176,7 @@
 			usart0: serial@fffb0000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb0000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -188,6 +190,7 @@
 			usart1: serial@fffb4000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb4000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -201,6 +204,7 @@
 			usart2: serial@fffb8000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb8000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -214,6 +218,7 @@
 			usart3: serial@fffbc000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffbc000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -322,6 +327,7 @@
 			dbgu: serial@fffff200 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
@@ -333,7 +339,7 @@
 			pinctrl@fffff400 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				compatible = "atmel,at91rm9200-pinctrl", "simple-mfd";
 				ranges = <0xfffff400 0xfffff400 0x800>;
 
 				atmel,mux-mask =
@@ -757,7 +763,7 @@
 				};
 			};
 
-			pmc: pmc@fffffc00 {
+			pmc: clock-controller@fffffc00 {
 				compatible = "atmel,at91sam9rl-pmc", "syscon";
 				reg = <0xfffffc00 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -766,13 +772,13 @@
 				clock-names = "slow_clk", "main_xtal";
 			};
 
-			rstc@fffffd00 {
+			reset-controller@fffffd00 {
 				compatible = "atmel,at91sam9260-rstc";
 				reg = <0xfffffd00 0x10>;
 				clocks = <&clk32k>;
 			};
 
-			shdwc@fffffd10 {
+			poweroff@fffffd10 {
 				compatible = "atmel,at91sam9260-shdwc";
 				reg = <0xfffffd10 0x10>;
 				clocks = <&clk32k>;
@@ -793,7 +799,7 @@
 				status = "disabled";
 			};
 
-			clk32k: sckc@fffffd50 {
+			clk32k: clock-controller@fffffd50 {
 				compatible = "atmel,at91sam9x5-sckc";
 				reg = <0xfffffd50 0x4>;
 				clocks = <&slow_xtal>;
@@ -827,8 +833,8 @@
 
 	i2c-gpio-0 {
 		compatible = "i2c-gpio";
-		gpios = <&pioA 23 GPIO_ACTIVE_HIGH>, /* sda */
-			<&pioA 24 GPIO_ACTIVE_HIGH>; /* scl */
+		sda-gpios = <&pioA 23 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&pioA 24 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
@@ -841,8 +847,8 @@
 
 	i2c-gpio-1 {
 		compatible = "i2c-gpio";
-		gpios = <&pioD 10 GPIO_ACTIVE_HIGH>, /* sda */
-			<&pioD 11 GPIO_ACTIVE_HIGH>; /* scl */
+		sda-gpios = <&pioD 10 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&pioD 11 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/microchip/at91sam9rlek.dts
index 62981b39c815..a57351270551 100644
--- a/arch/arm/boot/dts/at91sam9rlek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9rlek.dts
@@ -180,7 +180,7 @@
 			spi0: spi@fffcc000 {
 				status = "okay";
 				cs-gpios = <&pioA 28 0>, <0>, <0>, <0>;
-				mtd_dataflash@0 {
+				flash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					spi-max-frequency = <15000000>;
 					reg = <0>;
@@ -212,6 +212,10 @@
 				status = "okay";
 			};
 
+			rtc@fffffd20 {
+				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+			};
+
 			rtc@fffffe00 {
 				status = "okay";
 			};
@@ -244,17 +248,17 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		right_click {
+		button-right-click {
 			label = "right_click";
 			gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
 			linux,code = <273>;
 			wakeup-source;
 		};
 
-		left_click {
+		button-left-click {
 			label = "left_click";
 			gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
 			linux,code = <272>;
diff --git a/arch/arm/boot/dts/at91sam9x25.dtsi b/arch/arm/boot/dts/microchip/at91sam9x25.dtsi
index 0fe8802e1242..7036f5f04571 100644
--- a/arch/arm/boot/dts/at91sam9x25.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9x25.dtsi
@@ -27,7 +27,7 @@
 				      >;
 			};
 
-			pmc: pmc@fffffc00 {
+			pmc: clock-controller@fffffc00 {
 				compatible = "atmel,at91sam9x25-pmc", "atmel,at91sam9x5-pmc", "syscon";
 			};
 		};
diff --git a/arch/arm/boot/dts/at91sam9x25ek.dts b/arch/arm/boot/dts/microchip/at91sam9x25ek.dts
index ad7c6b36f0ba..ad7c6b36f0ba 100644
--- a/arch/arm/boot/dts/at91sam9x25ek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9x25ek.dts
diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi b/arch/arm/boot/dts/microchip/at91sam9x35.dtsi
index 0bfa21f18f87..eb03b0497e37 100644
--- a/arch/arm/boot/dts/at91sam9x35.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9x35.dtsi
@@ -26,7 +26,7 @@
 				      >;
 			};
 
-			pmc: pmc@fffffc00 {
+			pmc: clock-controller@fffffc00 {
 				compatible = "atmel,at91sam9x35-pmc", "atmel,at91sam9x5-pmc", "syscon";
 			};
 		};
diff --git a/arch/arm/boot/dts/at91sam9x35ek.dts b/arch/arm/boot/dts/microchip/at91sam9x35ek.dts
index 66675c787b97..66675c787b97 100644
--- a/arch/arm/boot/dts/at91sam9x35ek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9x35ek.dts
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5.dtsi
index 395e883644cd..9070fd06995a 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9x5.dtsi
@@ -13,6 +13,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
 	#address-cells = <1>;
@@ -67,7 +68,7 @@
 			clock-frequency = <0>;
 		};
 
-		adc_op_clk: adc_op_clk{
+		adc_op_clk: adc_op_clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <1000000>;
@@ -125,7 +126,7 @@
 				reg = <0xffffea00 0x200>;
 			};
 
-			pmc: pmc@fffffc00 {
+			pmc: clock-controller@fffffc00 {
 				compatible = "atmel,at91sam9x5-pmc", "syscon";
 				reg = <0xfffffc00 0x200>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -134,13 +135,13 @@
 				clock-names = "slow_clk", "main_xtal";
 			};
 
-			reset_controller: rstc@fffffe00 {
+			reset_controller: reset-controller@fffffe00 {
 				compatible = "atmel,at91sam9g45-rstc";
 				reg = <0xfffffe00 0x10>;
 				clocks = <&clk32k>;
 			};
 
-			shutdown_controller: shdwc@fffffe10 {
+			shutdown_controller: poweroff@fffffe10 {
 				compatible = "atmel,at91sam9x5-shdwc";
 				reg = <0xfffffe10 0x10>;
 				clocks = <&clk32k>;
@@ -153,7 +154,7 @@
 				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
 			};
 
-			clk32k: sckc@fffffe50 {
+			clk32k: clock-controller@fffffe50 {
 				compatible = "atmel,at91sam9x5-sckc";
 				reg = <0xfffffe50 0x4>;
 				clocks = <&slow_xtal>;
@@ -201,7 +202,7 @@
 			pinctrl: pinctrl@fffff400 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
+				compatible = "atmel,at91sam9x5-pinctrl", "simple-mfd";
 				ranges = <0xfffff400 0xfffff400 0x800>;
 
 				/* shared pinctrl settings */
@@ -674,6 +675,7 @@
 			dbgu: serial@fffff200 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
@@ -688,6 +690,7 @@
 			usart0: serial@f801c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf801c000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart0>;
@@ -702,6 +705,7 @@
 			usart1: serial@f8020000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8020000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart1>;
@@ -716,6 +720,7 @@
 			usart2: serial@f8024000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8024000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart2>;
@@ -775,6 +780,7 @@
 			uart0: serial@f8040000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8040000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart0>;
@@ -786,6 +792,7 @@
 			uart1: serial@f8044000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8044000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart1>;
@@ -879,7 +886,7 @@
 			};
 		};
 
-		usb0: ohci@600000 {
+		usb0: usb@600000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00600000 0x100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -888,7 +895,7 @@
 			status = "disabled";
 		};
 
-		usb1: ehci@700000 {
+		usb1: usb@700000 {
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00700000 0x100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -926,9 +933,8 @@
 
 	i2c-gpio-0 {
 		compatible = "i2c-gpio";
-		gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */
-			 &pioA 31 GPIO_ACTIVE_HIGH /* scl */
-			>;
+		sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
@@ -941,9 +947,8 @@
 
 	i2c-gpio-1 {
 		compatible = "i2c-gpio";
-		gpios = <&pioC 0 GPIO_ACTIVE_HIGH /* sda */
-			 &pioC 1 GPIO_ACTIVE_HIGH /* scl */
-			>;
+		sda-gpios = <&pioC 0 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&pioC 1 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
@@ -956,9 +961,8 @@
 
 	i2c-gpio-2 {
 		compatible = "i2c-gpio";
-		gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */
-			 &pioB 5 GPIO_ACTIVE_HIGH /* scl */
-			>;
+		sda-gpios = <&pioB 4 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&pioB 5 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
diff --git a/arch/arm/boot/dts/at91sam9x5_can.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5_can.dtsi
index 04ccb25d342c..04ccb25d342c 100644
--- a/arch/arm/boot/dts/at91sam9x5_can.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9x5_can.dtsi
diff --git a/arch/arm/boot/dts/at91sam9x5_isi.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5_isi.dtsi
index 4ce98f05d7db..4ce98f05d7db 100644
--- a/arch/arm/boot/dts/at91sam9x5_isi.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9x5_isi.dtsi
diff --git a/arch/arm/boot/dts/at91sam9x5_lcd.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5_lcd.dtsi
index f81c9d1691e0..f81c9d1691e0 100644
--- a/arch/arm/boot/dts/at91sam9x5_lcd.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9x5_lcd.dtsi
diff --git a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5_macb0.dtsi
index 222aa30f6860..222aa30f6860 100644
--- a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9x5_macb0.dtsi
diff --git a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5_macb1.dtsi
index 26bf9b5de9ee..26bf9b5de9ee 100644
--- a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9x5_macb1.dtsi
diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5_usart3.dtsi
index 098d3fef5c37..a47c765e1b20 100644
--- a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9x5_usart3.dtsi
@@ -8,6 +8,7 @@
 
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
 	aliases {
@@ -44,6 +45,7 @@
 			usart3: serial@f8028000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8028000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart3>;
diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5cm.dtsi
index cdd37f67280b..fb3c19bdfcb6 100644
--- a/arch/arm/boot/dts/at91sam9x5cm.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9x5cm.dtsi
@@ -120,13 +120,13 @@
 	leds {
 		compatible = "gpio-leds";
 
-		pb18 {
+		led-pb18 {
 			label = "pb18";
 			gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		pd21 {
+		led-pd21 {
 			label = "pd21";
 			gpios = <&pioD 21 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/at91sam9x5dm.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5dm.dtsi
index a9278038af3b..a9278038af3b 100644
--- a/arch/arm/boot/dts/at91sam9x5dm.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9x5dm.dtsi
diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5ek.dtsi
index 6d1264de6060..9618b8d965b0 100644
--- a/arch/arm/boot/dts/at91sam9x5ek.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9x5ek.dtsi
@@ -39,6 +39,8 @@
 };
 
 &dbgu {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
 	status = "okay";
 };
 
@@ -125,7 +127,7 @@
 	cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
 	status = "disabled"; /* conflicts with mmc1 */
 
-	m25p80@0 {
+	flash@0 {
 		compatible = "atmel,at25df321a";
 		spi-max-frequency = <50000000>;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/at91sam9xe.dtsi b/arch/arm/boot/dts/microchip/at91sam9xe.dtsi
index f571f77779c3..f571f77779c3 100644
--- a/arch/arm/boot/dts/at91sam9xe.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9xe.dtsi
diff --git a/arch/arm/boot/dts/ethernut5.dts b/arch/arm/boot/dts/microchip/ethernut5.dts
index ad7a0850252a..52ccef31b391 100644
--- a/arch/arm/boot/dts/ethernut5.dts
+++ b/arch/arm/boot/dts/microchip/ethernut5.dts
@@ -101,7 +101,7 @@
 			};
 		};
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/evk-pro3.dts b/arch/arm/boot/dts/microchip/evk-pro3.dts
index 6d519d02d190..40c5111c2f0a 100644
--- a/arch/arm/boot/dts/evk-pro3.dts
+++ b/arch/arm/boot/dts/microchip/evk-pro3.dts
@@ -45,7 +45,7 @@
 			};
 		};
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/ge863-pro3.dtsi b/arch/arm/boot/dts/microchip/ge863-pro3.dtsi
index dbba33e5a06c..dbba33e5a06c 100644
--- a/arch/arm/boot/dts/ge863-pro3.dtsi
+++ b/arch/arm/boot/dts/microchip/ge863-pro3.dtsi
diff --git a/arch/arm/boot/dts/microchip/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts b/arch/arm/boot/dts/microchip/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts
new file mode 100644
index 000000000000..0f555eb45bda
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for the Kontron KSwitch D10 MMT 6G-2GS
+ */
+
+/dts-v1/;
+#include "lan966x-kontron-kswitch-d10-mmt.dtsi"
+
+/ {
+	model = "Kontron KSwitch D10 MMT 6G-2GS";
+	compatible = "kontron,kswitch-d10-mmt-6g-2gs", "kontron,s1921",
+		     "microchip,lan9668", "microchip,lan966";
+
+	aliases {
+		i2c0 = &i2c4;
+		i2c1 = &i2c1;
+	};
+
+	sfp0: sfp0 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c4>;
+		los-gpios = <&sgpio_in 1 0 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in 1 1 GPIO_ACTIVE_LOW>;
+		maximum-power-milliwatt = <2500>;
+		tx-disable-gpios = <&sgpio_out 3 0 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in 0 2 GPIO_ACTIVE_HIGH>;
+		rate-select0-gpios = <&sgpio_out 2 0 GPIO_ACTIVE_HIGH>;
+		rate-select1-gpios = <&sgpio_out 2 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp1: sfp1 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c1>;
+		los-gpios = <&sgpio_in 1 2 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in 1 3 GPIO_ACTIVE_LOW>;
+		maximum-power-milliwatt = <2500>;
+		tx-disable-gpios = <&sgpio_out 3 1 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in 0 3 GPIO_ACTIVE_HIGH>;
+		rate-select0-gpios = <&sgpio_out 2 2 GPIO_ACTIVE_HIGH>;
+		rate-select1-gpios = <&sgpio_out 2 3 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&flx1 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c1: i2c@600 {
+		pinctrl-0 = <&fc1_c_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+};
+
+&flx4 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c4: i2c@600 {
+		pinctrl-0 = <&fc4_b_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+};
+
+&gpio {
+	fc1_c_pins: fc1-c-i2c-pins {
+		/* SCL, SDA */
+		pins = "GPIO_47", "GPIO_48";
+		function = "fc1_c";
+	};
+
+	fc4_b_pins: fc4-b-i2c-pins {
+		/* SCL, SDA */
+		pins = "GPIO_57", "GPIO_58";
+		function = "fc4_b";
+	};
+};
+
+&port2 {
+	phys = <&serdes 2 SERDES6G(0)>;
+	sfp = <&sfp0>;
+	managed = "in-band-status";
+	phy-mode = "sgmii";
+	status = "okay";
+};
+
+&port3 {
+	phys = <&serdes 3 SERDES6G(1)>;
+	sfp = <&sfp1>;
+	managed = "in-band-status";
+	phy-mode = "sgmii";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/lan966x-kontron-kswitch-d10-mmt-8g.dts b/arch/arm/boot/dts/microchip/lan966x-kontron-kswitch-d10-mmt-8g.dts
new file mode 100644
index 000000000000..ad5d8b56e6fa
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/lan966x-kontron-kswitch-d10-mmt-8g.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for the Kontron KSwitch D10 MMT 8G
+ */
+
+/dts-v1/;
+#include "lan966x-kontron-kswitch-d10-mmt.dtsi"
+
+/ {
+	model = "Kontron KSwitch D10 MMT 8G";
+	compatible = "kontron,kswitch-d10-mmt-8g", "kontron,s1921",
+		     "microchip,lan9668", "microchip,lan966";
+};
+
+&mdio0 {
+	phy2: ethernet-phy@3 {
+		reg = <3>;
+		interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	phy3: ethernet-phy@4 {
+		reg = <4>;
+		interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&port2 {
+	phys = <&serdes 2 SERDES6G(0)>;
+	phy-handle = <&phy2>;
+	phy-mode = "sgmii";
+	managed = "in-band-status";
+	status = "okay";
+};
+
+&port3 {
+	phys = <&serdes 3 SERDES6G(1)>;
+	phy-handle = <&phy3>;
+	phy-mode = "sgmii";
+	managed = "in-band-status";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/lan966x-kontron-kswitch-d10-mmt.dtsi b/arch/arm/boot/dts/microchip/lan966x-kontron-kswitch-d10-mmt.dtsi
new file mode 100644
index 000000000000..426893750d51
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/lan966x-kontron-kswitch-d10-mmt.dtsi
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Common part of the device tree for the Kontron KSwitch D10 MMT
+ */
+
+/dts-v1/;
+#include "lan966x.dtsi"
+#include "dt-bindings/phy/phy-lan966x-serdes.h"
+
+/ {
+	aliases {
+		serial0 = &usart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		pinctrl-0 = <&reset_pins>;
+		pinctrl-names = "default";
+		gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+};
+
+&flx0 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	usart0: serial@200 {
+		pinctrl-0 = <&usart0_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+};
+
+&flx3 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+	status = "okay";
+
+	spi3: spi@400 {
+		pinctrl-0 = <&fc3_b_pins>, <&spi3_cs_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+		cs-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&gpio {
+	pinctrl-0 = <&phy_int_pins>;
+	pinctrl-names = "default";
+
+	fc3_b_pins: fc3-b-pins {
+		/* SCK, MISO, MOSI */
+		pins = "GPIO_51", "GPIO_52", "GPIO_53";
+		function = "fc3_b";
+	};
+
+	miim_c_pins: miim-c-pins {
+		/* MDC, MDIO */
+		pins = "GPIO_59", "GPIO_60";
+		function = "miim_c";
+	};
+
+	phy_int_pins: phy-int-pins {
+		/* PHY_INT# */
+		pins = "GPIO_24";
+		function = "gpio";
+	};
+
+	reset_pins: reset-pins {
+		/* SYS_RST# */
+		pins = "GPIO_56";
+		function = "gpio";
+	};
+
+	sgpio_a_pins: sgpio-a-pins {
+		/* SCK, D0, D1 */
+		pins = "GPIO_32", "GPIO_33", "GPIO_34";
+		function = "sgpio_a";
+	};
+
+	sgpio_b_pins: sgpio-b-pins {
+		/* LD */
+		pins = "GPIO_64";
+		function = "sgpio_b";
+	};
+
+	spi3_cs_pins: spi3-cs-pins {
+		/* CS# */
+		pins = "GPIO_46";
+		function = "gpio";
+	};
+
+	usart0_pins: usart0-pins {
+		/* RXD, TXD */
+		pins = "GPIO_25", "GPIO_26";
+		function = "fc0_b";
+	};
+
+	usbs_a_pins: usbs-a-pins {
+		/* VBUS_DET */
+		pins = "GPIO_66";
+		function = "gpio";
+	};
+};
+
+&mdio0 {
+	pinctrl-0 = <&miim_c_pins>;
+	pinctrl-names = "default";
+	reset-gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+	clock-frequency = <2500000>;
+	status = "okay";
+
+	phy4: ethernet-phy@5 {
+		reg = <5>;
+		interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>;
+		coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
+	};
+
+	phy5: ethernet-phy@6 {
+		reg = <6>;
+		interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>;
+		coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
+	};
+
+	phy6: ethernet-phy@7 {
+		reg = <7>;
+		interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>;
+		coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
+	};
+
+	phy7: ethernet-phy@8 {
+		reg = <8>;
+		interrupts-extended = <&gpio 24 IRQ_TYPE_LEVEL_LOW>;
+		coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
+	};
+};
+
+&mdio1 {
+	status = "okay";
+};
+
+&phy0 {
+	status = "okay";
+};
+
+&phy1 {
+	status = "okay";
+};
+
+&port0 {
+	phys = <&serdes 0 CU(0)>;
+	phy-handle = <&phy0>;
+	phy-mode = "gmii";
+	status = "okay";
+};
+
+&port1 {
+	phys = <&serdes 1 CU(1)>;
+	phy-handle = <&phy1>;
+	phy-mode = "gmii";
+	status = "okay";
+};
+
+&port4 {
+	phys = <&serdes 4 SERDES6G(2)>;
+	phy-handle = <&phy4>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&port5 {
+	phys = <&serdes 5 SERDES6G(2)>;
+	phy-handle = <&phy5>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&port6 {
+	phys = <&serdes 6 SERDES6G(2)>;
+	phy-handle = <&phy6>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&port7 {
+	phys = <&serdes 7 SERDES6G(2)>;
+	phy-handle = <&phy7>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&serdes {
+	status = "okay";
+};
+
+&sgpio {
+	pinctrl-0 = <&sgpio_a_pins>, <&sgpio_b_pins>;
+	pinctrl-names = "default";
+	bus-frequency = <8000000>;
+	/* arbitrary range because all GPIOs are in software mode */
+	microchip,sgpio-port-ranges = <0 11>;
+	status = "okay";
+
+	sgpio_in: gpio@0 {
+		ngpios = <128>;
+	};
+
+	sgpio_out: gpio@1 {
+		ngpios = <128>;
+	};
+};
+
+&switch {
+	status = "okay";
+};
+
+&udc {
+	pinctrl-0 = <&usbs_a_pins>;
+	pinctrl-names = "default";
+	atmel,vbus-gpio = <&gpio 66 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/lan966x-pcb8290.dts b/arch/arm/boot/dts/microchip/lan966x-pcb8290.dts
new file mode 100644
index 000000000000..3b7577e48b46
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/lan966x-pcb8290.dts
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * lan966x-pcb8290.dts - Device Tree file for LAN966X-PCB8290 board
+ *
+ * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Horatiu Vultur <horatiu.vultur@microchip.com>
+ */
+/dts-v1/;
+#include "lan966x.dtsi"
+#include "dt-bindings/phy/phy-lan966x-serdes.h"
+
+/ {
+	model = "Microchip EVB LAN9668";
+	compatible = "microchip,lan9668-pcb8290", "microchip,lan9668", "microchip,lan966";
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+};
+
+&aes {
+	status = "disabled"; /* Reserved by secure OS */
+};
+
+&gpio {
+	miim_a_pins: mdio-pins {
+		/* MDC, MDIO */
+		pins = "GPIO_28", "GPIO_29";
+		function = "miim_a";
+	};
+
+	pps_out_pins: pps-out-pins {
+		/* 1pps output */
+		pins = "GPIO_38";
+		function = "ptpsync_3";
+	};
+
+	ptp_ext_pins: ptp-ext-pins {
+		/* 1pps input */
+		pins = "GPIO_35";
+		function = "ptpsync_0";
+	};
+
+	udc_pins: ucd-pins {
+		/* VBUS_DET B */
+		pins = "GPIO_8";
+		function = "usb_slave_b";
+	};
+};
+
+&mdio0 {
+	pinctrl-0 = <&miim_a_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ext_phy0: ethernet-phy@7 {
+		reg = <7>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy1: ethernet-phy@8 {
+		reg = <8>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy2: ethernet-phy@9 {
+		reg = <9>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy3: ethernet-phy@10 {
+		reg = <10>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy4: ethernet-phy@15 {
+		reg = <15>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy5: ethernet-phy@16 {
+		reg = <16>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy6: ethernet-phy@17 {
+		reg = <17>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy7: ethernet-phy@18 {
+		reg = <18>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+};
+
+&port0 {
+	reg = <2>;
+	phy-handle = <&ext_phy2>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 0 SERDES6G(1)>;
+	status = "okay";
+};
+
+&port1 {
+	reg = <3>;
+	phy-handle = <&ext_phy3>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 1 SERDES6G(1)>;
+	status = "okay";
+};
+
+&port2 {
+	reg = <0>;
+	phy-handle = <&ext_phy0>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 2 SERDES6G(1)>;
+	status = "okay";
+};
+
+&port3 {
+	reg = <1>;
+	phy-handle = <&ext_phy1>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 3 SERDES6G(1)>;
+	status = "okay";
+};
+
+&port4 {
+	reg = <6>;
+	phy-handle = <&ext_phy6>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 4 SERDES6G(2)>;
+	status = "okay";
+};
+
+&port5 {
+	reg = <7>;
+	phy-handle = <&ext_phy7>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 5 SERDES6G(2)>;
+	status = "okay";
+};
+
+&port6 {
+	reg = <4>;
+	phy-handle = <&ext_phy4>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 6 SERDES6G(2)>;
+	status = "okay";
+};
+
+&port7 {
+	reg = <5>;
+	phy-handle = <&ext_phy5>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 7 SERDES6G(2)>;
+	status = "okay";
+};
+
+&serdes {
+	status = "okay";
+};
+
+&switch {
+	pinctrl-0 = <&pps_out_pins>, <&ptp_ext_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&udc {
+	pinctrl-0 = <&udc_pins>;
+	pinctrl-names = "default";
+	atmel,vbus-gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/lan966x-pcb8291.dts b/arch/arm/boot/dts/microchip/lan966x-pcb8291.dts
new file mode 100644
index 000000000000..3a3d76af8612
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/lan966x-pcb8291.dts
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * lan966x_pcb8291.dts - Device Tree file for PCB8291
+ */
+/dts-v1/;
+#include "lan966x.dtsi"
+#include "dt-bindings/phy/phy-lan966x-serdes.h"
+
+/ {
+	model = "Microchip EVB - LAN9662";
+	compatible = "microchip,lan9662-pcb8291", "microchip,lan9662", "microchip,lan966";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &usart3;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-s0-blue {
+			label = "s0:blue";
+			gpios = <&sgpio_out 2 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-s0-green {
+			label = "s0:green";
+			gpios = <&sgpio_out 2 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-s1-blue {
+			label = "s1:blue";
+			gpios = <&sgpio_out 3 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-s1-green {
+			label = "s1:green";
+			gpios = <&sgpio_out 3 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&aes {
+	status = "disabled"; /* Reserved by secure OS */
+};
+
+&gpio {
+	fc3_b_pins: fc3-b-pins {
+		/* RX, TX */
+		pins = "GPIO_52", "GPIO_53";
+		function = "fc3_b";
+	};
+
+	can0_b_pins:  can0-b-pins {
+		/* RX, TX */
+		pins = "GPIO_35", "GPIO_36";
+		function = "can0_b";
+	};
+
+	sgpio_a_pins: sgpio-a-pins {
+		/* SCK, D0, D1, LD */
+		pins = "GPIO_32", "GPIO_33", "GPIO_34", "GPIO_35";
+		function = "sgpio_a";
+	};
+};
+
+&can0 {
+	pinctrl-0 = <&can0_b_pins>;
+	pinctrl-names = "default";
+	status = "disabled"; /* Conflict with switch */
+};
+
+&flx3 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	usart3: serial@200 {
+		pinctrl-0 = <&fc3_b_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+};
+
+&mdio1 {
+	status = "okay";
+};
+
+&phy0 {
+	status = "okay";
+};
+
+&phy1 {
+	status = "okay";
+};
+
+&port0 {
+	phy-handle = <&phy0>;
+	phy-mode = "gmii";
+	phys = <&serdes 0 CU(0)>;
+	status = "okay";
+};
+
+&port1 {
+	phy-handle = <&phy1>;
+	phy-mode = "gmii";
+	phys = <&serdes 1 CU(1)>;
+	status = "okay";
+};
+
+&serdes {
+	status = "okay";
+};
+
+&sgpio {
+	pinctrl-0 = <&sgpio_a_pins>;
+	pinctrl-names = "default";
+	microchip,sgpio-port-ranges = <0 3>, <8 11>;
+	status = "okay";
+
+	gpio@0 {
+		ngpios = <64>;
+	};
+	gpio@1 {
+		ngpios = <64>;
+	};
+};
+
+&switch {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/lan966x-pcb8309.dts b/arch/arm/boot/dts/microchip/lan966x-pcb8309.dts
new file mode 100644
index 000000000000..0cb505f79ba1
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/lan966x-pcb8309.dts
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * lan966x_pcb8309.dts - Device Tree file for PCB8309
+ */
+/dts-v1/;
+#include "lan966x.dtsi"
+#include "dt-bindings/phy/phy-lan966x-serdes.h"
+
+/ {
+	model = "Microchip EVB - LAN9662";
+	compatible = "microchip,lan9662-pcb8309", "microchip,lan9662", "microchip,lan966";
+
+	aliases {
+		serial0 = &usart3;
+		i2c102 = &i2c102;
+		i2c103 = &i2c103;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+
+	i2c-mux {
+		compatible = "i2c-mux";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		mux-controls = <&mux>;
+		i2c-parent = <&i2c4>;
+
+		i2c102: i2c-sfp@1 {
+			reg = <1>;
+		};
+
+		i2c103: i2c-sfp@2 {
+			reg = <2>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-s0-green {
+			label = "s0:green";
+			gpios = <&sgpio_out 2 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-s0-red {
+			label = "s0:red";
+			gpios = <&sgpio_out 2 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-s1-green {
+			label = "s1:green";
+			gpios = <&sgpio_out 3 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-s1-red {
+			label = "s1:red";
+			gpios = <&sgpio_out 3 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	mux: mux-controller {
+		compatible = "gpio-mux";
+		#mux-control-cells = <0>;
+
+		mux-gpios = <&sgpio_out 11 0 GPIO_ACTIVE_HIGH>, /* p11b0 */
+			    <&sgpio_out 11 1 GPIO_ACTIVE_HIGH>; /* p11b1 */
+	};
+
+	sfp2: sfp2 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c102>;
+		tx-disable-gpios = <&sgpio_out 10 0 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in  2 0 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in  2 1 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in  1 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp3: sfp3 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c103>;
+		tx-disable-gpios = <&sgpio_out 10 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in  3 0 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in  3 1 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in  1 1 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&aes {
+	status = "disabled"; /* Reserved by secure OS */
+};
+
+&flx3 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	usart3: serial@200 {
+		pinctrl-0 = <&fc3_b_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+};
+
+&flx4 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c4: i2c@600 {
+		compatible = "microchip,sam9x60-i2c";
+		reg = <0x600 0x200>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&nic_clk>;
+		pinctrl-0 = <&fc4_b_pins>;
+		pinctrl-names = "default";
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		i2c-sda-hold-time-ns = <1500>;
+		status = "okay";
+	};
+};
+
+&gpio {
+	fc3_b_pins: fc3-b-pins {
+		/* RXD, TXD */
+		pins = "GPIO_52", "GPIO_53";
+		function = "fc3_b";
+	};
+
+	fc4_b_pins: fc4-b-pins {
+		/* SCL, SDA */
+		pins = "GPIO_57", "GPIO_58";
+		function = "fc4_b";
+	};
+
+	pps_out_pins: pps-out-pins {
+		/* 1pps output */
+		pins = "GPIO_38";
+		function = "ptpsync_3";
+	};
+
+	ptp_ext_pins: ptp-ext-pins {
+		/* 1pps input */
+		pins = "GPIO_39";
+		function = "ptpsync_4";
+	};
+
+	sgpio_a_pins: sgpio-a-pins {
+		/* SCK, D0, D1, LD */
+		pins = "GPIO_32", "GPIO_33", "GPIO_34", "GPIO_35";
+		function = "sgpio_a";
+	};
+};
+
+&mdio1 {
+	status = "okay";
+};
+
+&phy0 {
+	status = "okay";
+};
+
+&phy1 {
+	status = "okay";
+};
+
+&port0 {
+	phy-handle = <&phy0>;
+	phy-mode = "gmii";
+	phys = <&serdes 0 CU(0)>;
+	status = "okay";
+};
+
+&port1 {
+	phy-handle = <&phy1>;
+	phy-mode = "gmii";
+	phys = <&serdes 1 CU(1)>;
+	status = "okay";
+};
+
+&port2 {
+	sfp = <&sfp2>;
+	managed = "in-band-status";
+	phy-mode = "sgmii";
+	phys = <&serdes 2 SERDES6G(0)>;
+	status = "okay";
+};
+
+&port3 {
+	sfp = <&sfp3>;
+	managed = "in-band-status";
+	phy-mode = "sgmii";
+	phys = <&serdes 3 SERDES6G(1)>;
+	status = "okay";
+};
+
+&serdes {
+	status = "okay";
+};
+
+&sgpio {
+	pinctrl-0 = <&sgpio_a_pins>;
+	pinctrl-names = "default";
+	microchip,sgpio-port-ranges = <0 3>, <8 11>;
+	status = "okay";
+
+	gpio@0 {
+		ngpios = <64>;
+	};
+	gpio@1 {
+		ngpios = <64>;
+	};
+};
+
+&switch {
+	pinctrl-0 = <&pps_out_pins>, <&ptp_ext_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/lan966x.dtsi b/arch/arm/boot/dts/microchip/lan966x.dtsi
new file mode 100644
index 000000000000..05b73f7cf0c7
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/lan966x.dtsi
@@ -0,0 +1,615 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * lan966x.dtsi - Device Tree Include file for Microchip LAN966 family SoC
+ *
+ * Copyright (C) 2021 Microchip Technology, Inc. and its subsidiaries
+ *
+ * Author: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/microchip,lan966x.h>
+
+/ {
+	model = "Microchip LAN966 family SoC";
+	compatible = "microchip,lan966";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			clock-frequency = <600000000>;
+			reg = <0x0>;
+		};
+	};
+
+	clocks {
+		sys_clk: sys_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <165625000>;
+		};
+
+		cpu_clk: cpu_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <600000000>;
+		};
+
+		ddr_clk: ddr_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <300000000>;
+		};
+
+		nic_clk: nic_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	clks: clock-controller@e00c00a8 {
+		compatible = "microchip,lan966x-gck";
+		#clock-cells = <1>;
+		clocks = <&cpu_clk>, <&ddr_clk>, <&sys_clk>;
+		clock-names = "cpu", "ddr", "sys";
+		reg = <0xe00c00a8 0x38>, <0xe00c02cc 0x4>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <37500000>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		udc: usb@200000 {
+			compatible = "microchip,lan9662-udc",
+				     "atmel,sama5d3-udc";
+			reg = <0x00200000 0x80000>,
+			      <0xe0808000 0x400>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks GCK_GATE_UDPHS>, <&nic_clk>;
+			clock-names = "pclk", "hclk";
+			status = "disabled";
+		};
+
+		switch: switch@e0000000 {
+			compatible = "microchip,lan966x-switch";
+			reg = <0xe0000000 0x0100000>,
+			      <0xe2000000 0x0800000>;
+			reg-names = "cpu", "gcb";
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "xtr", "fdma", "ana", "ptp",
+					  "ptp-ext";
+			resets = <&reset 0>;
+			reset-names = "switch";
+			status = "disabled";
+
+			ethernet-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port0: port@0 {
+					reg = <0>;
+					status = "disabled";
+				};
+
+				port1: port@1 {
+					reg = <1>;
+					status = "disabled";
+				};
+
+				port2: port@2 {
+					reg = <2>;
+					status = "disabled";
+				};
+
+				port3: port@3 {
+					reg = <3>;
+					status = "disabled";
+				};
+
+				port4: port@4 {
+					reg = <4>;
+					status = "disabled";
+				};
+
+				port5: port@5 {
+					reg = <5>;
+					status = "disabled";
+				};
+
+				port6: port@6 {
+					reg = <6>;
+					status = "disabled";
+				};
+
+				port7: port@7 {
+					reg = <7>;
+					status = "disabled";
+				};
+			};
+		};
+
+		otp: otp@e0021000 {
+			compatible = "microchip,lan9668-otpc", "microchip,lan9662-otpc";
+			reg = <0xe0021000 0x300>;
+		};
+
+		flx0: flexcom@e0040000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe0040000 0x100>;
+			clocks = <&clks GCK_ID_FLEXCOM0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe0040000 0x800>;
+			status = "disabled";
+
+			usart0: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(3)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(2)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "usart";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+
+			spi0: spi@400 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(3)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(2)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "spi_clk";
+				atmel,fifo-size = <32>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@600 {
+				compatible = "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(3)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(2)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		flx1: flexcom@e0044000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe0044000 0x100>;
+			clocks = <&clks GCK_ID_FLEXCOM1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe0044000 0x800>;
+			status = "disabled";
+
+			usart1: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(5)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(4)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "usart";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+
+			spi1: spi@400 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(5)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(4)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "spi_clk";
+				atmel,fifo-size = <32>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@600 {
+				compatible = "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(5)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(4)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		trng: rng@e0048000 {
+			compatible = "atmel,at91sam9g45-trng";
+			reg = <0xe0048000 0x100>;
+			clocks = <&nic_clk>;
+		};
+
+		aes: crypto@e004c000 {
+			compatible = "atmel,at91sam9g46-aes";
+			reg = <0xe004c000 0x100>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(12)>,
+			       <&dma0 AT91_XDMAC_DT_PERID(13)>;
+			dma-names = "tx", "rx";
+			clocks = <&nic_clk>;
+			clock-names = "aes_clk";
+		};
+
+		flx2: flexcom@e0060000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe0060000 0x100>;
+			clocks = <&clks GCK_ID_FLEXCOM2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe0060000 0x800>;
+			status = "disabled";
+
+			usart2: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(6)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "usart";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+
+			spi2: spi@400 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(6)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "spi_clk";
+				atmel,fifo-size = <32>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@600 {
+				compatible = "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(6)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		flx3: flexcom@e0064000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe0064000 0x100>;
+			clocks = <&clks GCK_ID_FLEXCOM3>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe0064000 0x800>;
+			status = "disabled";
+
+			usart3: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(9)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(8)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "usart";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+
+			spi3: spi@400 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(9)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(8)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "spi_clk";
+				atmel,fifo-size = <32>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@600 {
+				compatible = "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(9)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(8)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		dma0: dma-controller@e0068000 {
+			compatible = "microchip,sama7g5-dma";
+			reg = <0xe0068000 0x1000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&nic_clk>;
+			clock-names = "dma_clk";
+		};
+
+		sha: crypto@e006c000 {
+			compatible = "atmel,at91sam9g46-sha";
+			reg = <0xe006c000 0xec>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(14)>;
+			dma-names = "tx";
+			clocks = <&nic_clk>;
+			clock-names = "sha_clk";
+		};
+
+		flx4: flexcom@e0070000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe0070000 0x100>;
+			clocks = <&clks GCK_ID_FLEXCOM4>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe0070000 0x800>;
+			status = "disabled";
+
+			usart4: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(11)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(10)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "usart";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+
+			spi4: spi@400 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(11)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(10)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "spi_clk";
+				atmel,fifo-size = <32>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@600 {
+				compatible = "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(11)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(10)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		timer0: timer@e008c000 {
+			compatible = "snps,dw-apb-timer";
+			reg = <0xe008c000 0x400>;
+			clocks = <&nic_clk>;
+			clock-names = "timer";
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		watchdog: watchdog@e0090000 {
+			compatible = "snps,dw-wdt";
+			reg = <0xe0090000 0x1000>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&nic_clk>;
+			status = "disabled";
+		};
+
+		cpu_ctrl: syscon@e00c0000 {
+			compatible = "microchip,lan966x-cpu-syscon", "syscon";
+			reg = <0xe00c0000 0x350>;
+		};
+
+		can0: can@e081c000 {
+			compatible = "bosch,m_can";
+			reg = <0xe081c000 0xfc>, <0x00100000 0x4000>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&clks GCK_ID_MCAN0>, <&clks GCK_ID_MCAN0>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&clks GCK_ID_MCAN0>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can1: can@e0820000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0820000 0xfc>, <0x00100000 0x8000>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&clks GCK_ID_MCAN1>, <&clks GCK_ID_MCAN1>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&clks GCK_ID_MCAN1>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x4000 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		reset: reset-controller@e200400c {
+			compatible = "microchip,lan966x-switch-reset";
+			reg = <0xe200400c 0x4>;
+			reg-names = "gcb";
+			#reset-cells = <1>;
+			cpu-syscon = <&cpu_ctrl>;
+		};
+
+		gpio: pinctrl@e2004064 {
+			compatible = "microchip,lan966x-pinctrl";
+			reg = <0xe2004064 0xb4>,
+			    <0xe2010024 0x138>;
+			resets = <&reset 0>;
+			reset-names = "switch";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&gpio 0 0 78>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+		};
+
+		mdio0: mdio@e2004118 {
+			compatible = "microchip,lan966x-miim";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xe2004118 0x24>;
+			clocks = <&sys_clk>;
+			status = "disabled";
+		};
+
+		mdio1: mdio@e200413c {
+			compatible = "microchip,lan966x-miim";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xe200413c 0x24>,
+			      <0xe2010020 0x4>;
+			clocks = <&sys_clk>;
+			status = "disabled";
+
+			phy0: ethernet-phy@1 {
+				reg = <1>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			phy1: ethernet-phy@2 {
+				reg = <2>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		sgpio: gpio@e2004190 {
+			compatible = "microchip,sparx5-sgpio";
+			reg = <0xe2004190 0x118>;
+			clocks = <&sys_clk>;
+			resets = <&reset 0>;
+			reset-names = "switch";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sgpio_in: gpio@0 {
+				compatible = "microchip,sparx5-sgpio-bank";
+				reg = <0>;
+				gpio-controller;
+				#gpio-cells = <3>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+			};
+
+			sgpio_out: gpio@1 {
+				compatible = "microchip,sparx5-sgpio-bank";
+				reg = <1>;
+				gpio-controller;
+				#gpio-cells = <3>;
+			};
+		};
+
+		hwmon: hwmon@e2010180 {
+			compatible = "microchip,lan9668-hwmon";
+			reg = <0xe2010180 0xc>,
+			      <0xe20042a8 0xc>;
+			reg-names = "pvt", "fan";
+			clocks = <&sys_clk>;
+		};
+
+		serdes: serdes@e202c000 {
+			compatible = "microchip,lan966x-serdes";
+			reg = <0xe202c000 0x9c>,
+			      <0xe2004010 0x4>;
+			#phy-cells = <2>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@e8c11000 {
+			compatible = "arm,gic-400", "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			reg = <0xe8c11000 0x1000>,
+			      <0xe8c12000 0x2000>,
+			      <0xe8c14000 0x2000>,
+			      <0xe8c16000 0x2000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/mpa1600.dts b/arch/arm/boot/dts/microchip/mpa1600.dts
index 005c2758e229..2a97e2c0b894 100644
--- a/arch/arm/boot/dts/mpa1600.dts
+++ b/arch/arm/boot/dts/microchip/mpa1600.dts
@@ -57,7 +57,7 @@
 			};
 		};
 
-		usb0: ohci@300000 {
+		usb0: usb@300000 {
 			num-ports = <1>;
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/pm9g45.dts b/arch/arm/boot/dts/microchip/pm9g45.dts
index c349fd3758a6..2258e62f5864 100644
--- a/arch/arm/boot/dts/pm9g45.dts
+++ b/arch/arm/boot/dts/microchip/pm9g45.dts
@@ -139,12 +139,12 @@
 			};
 		};
 
-		usb0: ohci@700000 {
+		usb0: usb@700000 {
 			status = "okay";
 			num-ports = <2>;
 		};
 
-		usb1: ehci@800000 {
+		usb1: usb@800000 {
 			status = "okay";
 		};
 	};
diff --git a/arch/arm/boot/dts/microchip/sam9x60.dtsi b/arch/arm/boot/dts/microchip/sam9x60.dtsi
new file mode 100644
index 000000000000..b075865e6a76
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sam9x60.dtsi
@@ -0,0 +1,1403 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sam9x60.dtsi - Device Tree Include file for Microchip SAM9X60 SoC
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Sandeep Sheriker M <sandeepsheriker.mallikarjun@microchip.com>
+ */
+
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Microchip SAM9X60 SoC";
+	compatible = "microchip,sam9x60";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x10000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	sram: sram@300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00300000 0x100000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		usb0: gadget@500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "microchip,sam9x60-udc";
+			reg = <0x00500000 0x100000
+				0xf803c000 0x400>;
+			interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			clock-names = "pclk", "hclk";
+			assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			assigned-clock-rates = <480000000>;
+			status = "disabled";
+		};
+
+		usb1: usb@600000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00600000 0x100000>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		usb2: usb@700000 {
+			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+			reg = <0x00700000 0x100000>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 22>;
+			clock-names = "usb_clk", "ehci_clk";
+			assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			assigned-clock-rates = <480000000>;
+			status = "disabled";
+		};
+
+		ebi: ebi@10000000 {
+			compatible = "microchip,sam9x60-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&smc>;
+			microchip,sfr = <&sfr>;
+			reg = <0x10000000 0x60000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x20000000 0x10000000
+				  0x2 0x0 0x30000000 0x10000000
+				  0x3 0x0 0x40000000 0x10000000
+				  0x4 0x0 0x50000000 0x10000000
+				  0x5 0x0 0x60000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "microchip,sam9x60-nand-controller";
+				ecc-engine = <&pmecc>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+
+		sdmmc0: sdio-host@80000000 {
+			compatible = "microchip,sam9x60-sdhci";
+			reg = <0x80000000 0x300>;
+			interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 12>, <&pmc PMC_TYPE_GCK 12>;
+			clock-names = "hclock", "multclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 12>;
+			assigned-clock-rates = <100000000>;
+			status = "disabled";
+		};
+
+		sdmmc1: sdio-host@90000000 {
+			compatible = "microchip,sam9x60-sdhci";
+			reg = <0x90000000 0x300>;
+			interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_GCK 26>;
+			clock-names = "hclock", "multclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 26>;
+			assigned-clock-rates = <100000000>;
+			status = "disabled";
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			flx4: flexcom@f0000000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf0000000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf0000000 0x800>;
+				status = "disabled";
+
+				uart4: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(8))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(9))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				spi4: spi@400 {
+					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(8))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(9))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c4: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(8))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(9))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx5: flexcom@f0004000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf0004000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf0004000 0x800>;
+				status = "disabled";
+
+				uart5: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(10))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(11))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+					clock-names = "usart";
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				spi5: spi@400 {
+					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(10))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(11))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c5: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(10))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(11))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			dma0: dma-controller@f0008000 {
+				compatible = "microchip,sam9x60-dma", "atmel,sama5d4-dma";
+				reg = <0xf0008000 0x1000>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+				clock-names = "dma_clk";
+			};
+
+			ssc: ssc@f0010000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf0010000 0x4000>;
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(38))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(39))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			qspi: spi@f0014000 {
+				compatible = "microchip,sam9x60-qspi";
+				reg = <0xf0014000 0x100>, <0x70000000 0x10000000>;
+				reg-names = "qspi_base", "qspi_mmap";
+				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(26))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(27))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&pmc PMC_TYPE_SYSTEM 19>;
+				clock-names = "pclk", "qspick";
+				atmel,pmc = <&pmc>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2s: i2s@f001c000 {
+				compatible = "microchip,sam9x60-i2smcc";
+				reg = <0xf001c000 0x100>;
+				interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(36))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(37))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&pmc PMC_TYPE_GCK 34>;
+				clock-names = "pclk", "gclk";
+				status = "disabled";
+			};
+
+			flx11: flexcom@f0020000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf0020000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf0020000 0x800>;
+				status = "disabled";
+
+				uart11: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(22))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(23))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
+					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c11: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(22))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(23))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx12: flexcom@f0024000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf0024000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf0024000 0x800>;
+				status = "disabled";
+
+				uart12: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(24))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(25))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
+					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c12: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(24))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(25))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			pit64b: timer@f0028000 {
+				compatible = "microchip,sam9x60-pit64b";
+				reg = <0xf0028000 0x100>;
+				interrupts = <37 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 37>, <&pmc PMC_TYPE_GCK 37>;
+				clock-names = "pclk", "gclk";
+			};
+
+			sha: crypto@f002c000 {
+				compatible = "atmel,at91sam9g46-sha";
+				reg = <0xf002c000 0x100>;
+				interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(34))>;
+				dma-names = "tx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
+				clock-names = "sha_clk";
+			};
+
+			trng: rng@f0030000 {
+				compatible = "microchip,sam9x60-trng";
+				reg = <0xf0030000 0x100>;
+				interrupts = <38 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+			};
+
+			aes: crypto@f0034000 {
+				compatible = "atmel,at91sam9g46-aes";
+				reg = <0xf0034000 0x100>;
+				interrupts = <39 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(32))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(33))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+				clock-names = "aes_clk";
+			};
+
+			tdes: crypto@f0038000 {
+				compatible = "atmel,at91sam9g46-tdes";
+				reg = <0xf0038000 0x100>;
+				interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(31))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(30))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
+				clock-names = "tdes_clk";
+			};
+
+			classd: classd@f003c000 {
+				compatible = "atmel,sama5d2-classd";
+				reg = <0xf003c000 0x100>;
+				interrupts = <42 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(35))>;
+				dma-names = "tx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&pmc PMC_TYPE_GCK 42>;
+				clock-names = "pclk", "gclk";
+				status = "disabled";
+			};
+
+			can0: can@f8000000 {
+				compatible = "microchip,sam9x60-can", "atmel,at91sam9x5-can";
+				reg = <0xf8000000 0x300>;
+				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
+				clock-names = "can_clk";
+				status = "disabled";
+			};
+
+			can1: can@f8004000 {
+				compatible = "microchip,sam9x60-can", "atmel,at91sam9x5-can";
+				reg = <0xf8004000 0x300>;
+				interrupts = <30 IRQ_TYPE_LEVEL_HIGH 3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
+				clock-names = "can_clk";
+				status = "disabled";
+			};
+
+			tcb0: timer@f8008000 {
+				compatible = "microchip,sam9x60-tcb", "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf8008000 0x100>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k 0>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			tcb1: timer@f800c000 {
+				compatible = "microchip,sam9x60-tcb", "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf800c000 0x100>;
+				interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 45>, <&clk32k 0>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			flx6: flexcom@f8010000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8010000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8010000 0x800>;
+				status = "disabled";
+
+				uart6: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(12))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(13))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c6: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(12))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(13))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx7: flexcom@f8014000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8014000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8014000 0x800>;
+				status = "disabled";
+
+				uart7: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(14))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(15))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c7: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(14))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(15))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx8: flexcom@f8018000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8018000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8018000 0x800>;
+				status = "disabled";
+
+				uart8: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(16))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(17))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c8: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(16))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(17))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx0: flexcom@f801c000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf801c000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf801c000 0x800>;
+				status = "disabled";
+
+				uart0: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(0))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(1))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				spi0: spi@400 {
+					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(0))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(1))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c0: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(0))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(1))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx1: flexcom@f8020000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8020000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8020000 0x800>;
+				status = "disabled";
+
+				uart1: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(2))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(3))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				spi1: spi@400 {
+					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(2))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(3))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c1: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(2))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(3))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx2: flexcom@f8024000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8024000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8024000 0x800>;
+				status = "disabled";
+
+				uart2: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(4))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(5))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				spi2: spi@400 {
+					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(4))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(5))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c2: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(4))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(5))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx3: flexcom@f8028000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8028000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8028000 0x800>;
+				status = "disabled";
+
+				uart3: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(6))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(7))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				spi3: spi@400 {
+					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(6))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(7))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c3: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(6))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(7))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			macb0: ethernet@f802c000 {
+				compatible = "cdns,sam9x60-macb", "cdns,macb";
+				reg = <0xf802c000 0x1000>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_PERIPHERAL 24>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			macb1: ethernet@f8030000 {
+				compatible = "cdns,sam9x60-macb", "cdns,macb";
+				reg = <0xf8030000 0x1000>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_PERIPHERAL 27>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			pwm0: pwm@f8034000 {
+				compatible = "microchip,sam9x60-pwm";
+				reg = <0xf8034000 0x300>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			hlcdc: hlcdc@f8038000 {
+				compatible = "microchip,sam9x60-hlcdc";
+				reg = <0xf8038000 0x4000>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_GCK 25>, <&clk32k 1>;
+				clock-names = "periph_clk","sys_clk", "slow_clk";
+				assigned-clocks = <&pmc PMC_TYPE_GCK 25>;
+				assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_MCK>;
+				status = "disabled";
+
+				hlcdc-display-controller {
+					compatible = "atmel,hlcdc-display-controller";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <0>;
+					};
+				};
+
+				hlcdc_pwm: hlcdc-pwm {
+					compatible = "atmel,hlcdc-pwm";
+					#pwm-cells = <3>;
+				};
+			};
+
+			flx9: flexcom@f8040000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8040000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8040000 0x800>;
+				status = "disabled";
+
+				uart9: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(18))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(19))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c9: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(18))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(19))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx10: flexcom@f8044000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8044000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8044000 0x800>;
+				status = "disabled";
+
+				uart10: serial@200 {
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(20))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(21))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+					clock-names = "usart";
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c10: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(20))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(21))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			isi: isi@f8048000 {
+				compatible = "microchip,sam9x60-isi", "atmel,at91sam9g45-isi";
+				reg = <0xf8048000 0x100>;
+				interrupts = <43 IRQ_TYPE_LEVEL_HIGH 5>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
+				clock-names = "isi_clk";
+				status = "disabled";
+				port {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+
+			adc: adc@f804c000 {
+				compatible = "microchip,sam9x60-adc", "atmel,sama5d2-adc";
+				reg = <0xf804c000 0x100>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+				clock-names = "adc_clk";
+				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(40))>;
+				dma-names = "rx";
+				atmel,min-sample-rate-hz = <200000>;
+				atmel,max-sample-rate-hz = <20000000>;
+				atmel,startup-time-ms = <4>;
+				atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>;
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			sfr: sfr@f8050000 {
+				compatible = "microchip,sam9x60-sfr", "syscon";
+				reg = <0xf8050000 0x100>;
+			};
+
+			matrix: matrix@ffffde00 {
+				compatible = "microchip,sam9x60-matrix", "atmel,at91sam9x5-matrix", "syscon";
+				reg = <0xffffde00 0x200>;
+			};
+
+			pmecc: ecc-engine@ffffe000 {
+				compatible = "microchip,sam9x60-pmecc", "atmel,at91sam9g45-pmecc";
+				reg = <0xffffe000 0x300>,
+				      <0xffffe600 0x100>;
+			};
+
+			mpddrc: mpddrc@ffffe800 {
+				compatible = "microchip,sam9x60-ddramc", "atmel,sama5d3-ddramc";
+				reg = <0xffffe800 0x200>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 49>;
+				clock-names = "ddrck", "mpddr";
+			};
+
+			smc: smc@ffffea00 {
+				compatible = "microchip,sam9x60-smc", "atmel,at91sam9260-smc", "syscon";
+				reg = <0xffffea00 0x100>;
+			};
+
+			aic: interrupt-controller@fffff100 {
+				compatible = "microchip,sam9x60-aic";
+				#interrupt-cells = <3>;
+				interrupt-controller;
+				reg = <0xfffff100 0x100>;
+				atmel,external-irqs = <31>;
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <47 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(28))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(29))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			pinctrl: pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "microchip,sam9x60-pinctrl", "simple-mfd";
+				ranges = <0xfffff400 0xfffff400 0x800>;
+
+				/* mux-mask corresponding to sam9x60 SoC in TFBGA228L package */
+				atmel,mux-mask = <
+						 /*	A	B	C	*/
+						 0xffffffff 0xffe03fff 0xef00019d	/* pioA */
+						 0x03ffffff 0x02fc7e7f 0x00780000	/* pioB */
+						 0xffffffff 0xffffffff 0xf83fffff	/* pioC */
+						 0x003fffff 0x003f8000 0x00000000	/* pioD */
+						 >;
+
+				pioA: gpio@fffff400 {
+					compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				};
+
+				pioB: gpio@fffff600 {
+					compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					#gpio-lines = <26>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+				};
+
+				pioC: gpio@fffff800 {
+					compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
+				};
+
+				pioD: gpio@fffffa00 {
+					compatible = "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x200>;
+					interrupts = <44 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					#gpio-lines = <22>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 44>;
+				};
+			};
+
+			pmc: clock-controller@fffffc00 {
+				compatible = "microchip,sam9x60-pmc", "syscon";
+				reg = <0xfffffc00 0x200>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				#clock-cells = <2>;
+				clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>;
+				clock-names = "td_slck", "md_slck", "main_xtal";
+			};
+
+			reset_controller: reset-controller@fffffe00 {
+				compatible = "microchip,sam9x60-rstc";
+				reg = <0xfffffe00 0x10>;
+				clocks = <&clk32k 0>;
+			};
+
+			shutdown_controller: poweroff@fffffe10 {
+				compatible = "microchip,sam9x60-shdwc";
+				reg = <0xfffffe10 0x10>;
+				clocks = <&clk32k 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				atmel,wakeup-rtc-timer;
+				atmel,wakeup-rtt-timer;
+				status = "disabled";
+			};
+
+			rtt: rtc@fffffe20 {
+				compatible = "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt";
+				reg = <0xfffffe20 0x20>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k 1>;
+			};
+
+			pit: timer@fffffe40 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffe40 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			};
+
+			clk32k: clock-controller@fffffe50 {
+				compatible = "microchip,sam9x60-sckc";
+				reg = <0xfffffe50 0x4>;
+				clocks = <&slow_xtal>;
+				#clock-cells = <1>;
+			};
+
+			gpbr: syscon@fffffe60 {
+				compatible = "microchip,sam9x60-gpbr", "atmel,at91sam9260-gpbr", "syscon";
+				reg = <0xfffffe60 0x10>;
+			};
+
+			rtc: rtc@fffffea8 {
+				compatible = "microchip,sam9x60-rtc", "atmel,at91sam9x5-rtc";
+				reg = <0xfffffea8 0x100>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k 1>;
+			};
+
+			watchdog: watchdog@ffffff80 {
+				compatible = "microchip,sam9x60-wdt";
+				reg = <0xffffff80 0x24>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k 0>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/sam9x7.dtsi b/arch/arm/boot/dts/microchip/sam9x7.dtsi
new file mode 100644
index 000000000000..46dacbbd201d
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sam9x7.dtsi
@@ -0,0 +1,1316 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sam9x7.dtsi - Device Tree Include file for Microchip SAM9X7 SoC family
+ *
+ * Copyright (C) 2023 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Varshini Rajendran <varshini.rajendran@microchip.com>
+ */
+
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/mfd/at91-usart.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/pinctrl/at91.h>
+
+/ {
+	model = "Microchip SAM9X7 SoC";
+	compatible = "microchip,sam9x7";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			reg = <0>;
+			device_type = "cpu";
+		};
+	};
+
+	clocks {
+		slow_xtal: clock-slowxtal {
+			compatible = "fixed-clock";
+			clock-output-names = "slow_xtal";
+			#clock-cells = <0>;
+		};
+
+		main_xtal: clock-mainxtal {
+			compatible = "fixed-clock";
+			clock-output-names = "main_xtal";
+			#clock-cells = <0>;
+		};
+	};
+
+	sram: sram@300000 {
+		compatible = "mmio-sram";
+		reg = <0x300000 0x10000>;
+		ranges = <0 0x300000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		sdmmc0: mmc@80000000 {
+			compatible = "microchip,sam9x7-sdhci", "microchip,sam9x60-sdhci";
+			reg = <0x80000000 0x300>;
+			interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 12>, <&pmc PMC_TYPE_GCK 12>;
+			clock-names = "hclock", "multclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 12>;
+			assigned-clock-rates = <100000000>;
+			status = "disabled";
+		};
+
+		sdmmc1: mmc@90000000 {
+			compatible = "microchip,sam9x7-sdhci", "microchip,sam9x60-sdhci";
+			reg = <0x90000000 0x300>;
+			interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_GCK 26>;
+			clock-names = "hclock", "multclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 26>;
+			assigned-clock-rates = <100000000>;
+			status = "disabled";
+		};
+	};
+
+	apb {
+		compatible = "simple-bus";
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		flx4: flexcom@f0000000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf0000000 0x200>;
+			ranges = <0x0 0xf0000000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+			status = "disabled";
+
+			uart4: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(8))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(9))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			spi4: spi@400 {
+				compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				clock-names = "spi_clk";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(8))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(9))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(8))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(9))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		flx5: flexcom@f0004000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf0004000 0x200>;
+			ranges = <0x0 0xf0004000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+			status = "disabled";
+
+			uart5: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(10))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(11))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			spi5: spi@400 {
+				compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				clock-names = "spi_clk";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(10))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(11))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+
+			i2c5: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(10))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(11))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		dma0: dma-controller@f0008000 {
+			compatible = "microchip,sam9x7-dma", "atmel,sama5d4-dma";
+			reg = <0xf0008000 0x1000>;
+			interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+			#dma-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+			clock-names = "dma_clk";
+			status = "disabled";
+		};
+
+		ssc: ssc@f0010000 {
+			compatible = "microchip,sam9x7-ssc", "atmel,at91sam9g45-ssc";
+			reg = <0xf0010000 0x4000>;
+			interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
+			clock-names = "pclk";
+			dmas = <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				 AT91_XDMAC_DT_PERID(38))>,
+			       <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				 AT91_XDMAC_DT_PERID(39))>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		qspi: spi@f0014000 {
+			compatible = "microchip,sam9x7-ospi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xf0014000 0x100>, <0x60000000 0x20000000>;
+			reg-names = "qspi_base", "qspi_mmap";
+			interrupts = <35 IRQ_TYPE_LEVEL_HIGH 7>;
+			dmas = <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				AT91_XDMAC_DT_PERID(26))>,
+				<&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				AT91_XDMAC_DT_PERID(27))>;
+			dma-names = "tx", "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&pmc PMC_TYPE_GCK 35>;
+			clock-names = "pclk", "gclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 35>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_PLLADIV2>;
+			status = "disabled";
+		};
+
+		i2s: i2s@f001c000 {
+			compatible = "microchip,sam9x7-i2smcc", "microchip,sam9x60-i2smcc";
+			reg = <0xf001c000 0x100>;
+			interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&pmc PMC_TYPE_GCK 34>;
+			clock-names = "pclk", "gclk";
+			dmas = <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				 AT91_XDMAC_DT_PERID(36))>,
+			       <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				 AT91_XDMAC_DT_PERID(37))>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		flx11: flexcom@f0020000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf0020000 0x200>;
+			ranges = <0x0 0xf0020000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
+			status = "disabled";
+
+			uart11: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(22))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(23))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			i2c11: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(22))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(23))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		flx12: flexcom@f0024000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf0024000 0x200>;
+			ranges = <0x0 0xf0024000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
+			status = "disabled";
+
+			uart12: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(24))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(25))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			i2c12: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(24))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(25))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		pit64b0: timer@f0028000 {
+			compatible = "microchip,sam9x7-pit64b", "microchip,sam9x60-pit64b";
+			reg = <0xf0028000 0x100>;
+			interrupts = <37 IRQ_TYPE_LEVEL_HIGH 7>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 37>, <&pmc PMC_TYPE_GCK 37>;
+			clock-names = "pclk", "gclk";
+		};
+
+		sha: crypto@f002c000 {
+			compatible = "microchip,sam9x7-sha", "atmel,at91sam9g46-sha";
+			reg = <0xf002c000 0x100>;
+			interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
+			clock-names = "sha_clk";
+			dmas = <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				 AT91_XDMAC_DT_PERID(34))>;
+			dma-names = "tx";
+		};
+
+		trng: rng@f0030000 {
+			compatible = "microchip,sam9x7-trng", "microchip,sam9x60-trng";
+			reg = <0xf0030000 0x100>;
+			interrupts = <38 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+			status = "disabled";
+		};
+
+		aes: crypto@f0034000 {
+			compatible = "microchip,sam9x7-aes", "atmel,at91sam9g46-aes";
+			reg = <0xf0034000 0x100>;
+			interrupts = <39 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+			clock-names = "aes_clk";
+			dmas = <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				 AT91_XDMAC_DT_PERID(32))>,
+			       <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				 AT91_XDMAC_DT_PERID(33))>;
+			dma-names = "tx", "rx";
+		};
+
+		tdes: crypto@f0038000 {
+			compatible = "microchip,sam9x7-tdes", "atmel,at91sam9g46-tdes";
+			reg = <0xf0038000 0x100>;
+			interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
+			clock-names = "tdes_clk";
+			dmas = <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				 AT91_XDMAC_DT_PERID(31))>,
+			       <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				 AT91_XDMAC_DT_PERID(30))>;
+			dma-names = "tx", "rx";
+		};
+
+		classd: sound@f003c000 {
+			compatible = "microchip,sam9x7-classd", "atmel,sama5d2-classd";
+			reg = <0xf003c000 0x100>;
+			interrupts = <42 IRQ_TYPE_LEVEL_HIGH 7>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&pmc PMC_TYPE_GCK 42>;
+			clock-names = "pclk", "gclk";
+			dmas = <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				 AT91_XDMAC_DT_PERID(35))>;
+			dma-names = "tx";
+			status = "disabled";
+		};
+
+		pit64b1: timer@f0040000 {
+			compatible = "microchip,sam9x7-pit64b", "microchip,sam9x60-pit64b";
+			reg = <0xf0040000 0x100>;
+			interrupts = <58 IRQ_TYPE_LEVEL_HIGH 7>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 58>, <&pmc PMC_TYPE_GCK 58>;
+			clock-names = "pclk", "gclk";
+		};
+
+		can0: can@f8000000 {
+			compatible = "bosch,m_can";
+			reg = <0xf8000000 0x100>, <0x300000 0x7800>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <68 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 29>, <&pmc PMC_TYPE_GCK 29>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_GCK 29>;
+			assigned-clock-rates = <480000000>, <40000000>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			bosch,mram-cfg = <0x3400 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can1: can@f8004000 {
+			compatible = "bosch,m_can";
+			reg = <0xf8004000 0x100>, <0x300000 0xbc00>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <30 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <69 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 30>, <&pmc PMC_TYPE_GCK 30>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_GCK 30>;
+			assigned-clock-rates = <480000000>, <40000000>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			bosch,mram-cfg = <0x7800 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		tcb: timer@f8008000 {
+			compatible = "microchip,sam9x7-tcb","atmel,sama5d2-tcb", "simple-mfd", "syscon";
+			reg = <0xf8008000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_GCK 17>, <&clk32k 0>;
+			clock-names = "t0_clk", "gclk", "slow_clk";
+		};
+
+		flx6: flexcom@f8010000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf8010000 0x200>;
+			ranges = <0x0 0xf8010000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+			status = "disabled";
+
+			uart6: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(12))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(13))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			i2c6: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(12))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(13))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		flx7: flexcom@f8014000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf8014000 0x200>;
+			ranges = <0x0 0xf8014000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+			status = "disabled";
+
+			uart7: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(14))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(15))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			i2c7: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(14))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(15))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		flx8: flexcom@f8018000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf8018000 0x200>;
+			ranges = <0x0 0xf8018000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+			status = "disabled";
+
+			uart8: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(16))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(17))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			i2c8: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(16))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(17))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		flx0: flexcom@f801c000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf801c000 0x200>;
+			ranges = <0x0 0xf801c000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+			status = "disabled";
+
+			uart0: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(0))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(1))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			spi0: spi@400 {
+				compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				clock-names = "spi_clk";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(0))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(1))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(0))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(1))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		flx1: flexcom@f8020000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf8020000 0x200>;
+			ranges = <0x0 0xf8020000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+			status = "disabled";
+
+			uart1: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(2))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(3))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			spi1: spi@400 {
+				compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				clock-names = "spi_clk";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(2))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(3))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(2))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(3))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		flx2: flexcom@f8024000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf8024000 0x200>;
+			ranges = <0x0 0xf8024000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+			status = "disabled";
+
+			uart2: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(4))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(5))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			spi2: spi@400 {
+				compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				clock-names = "spi_clk";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(4))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(5))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(4))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(5))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		flx3: flexcom@f8028000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf8028000 0x200>;
+			ranges = <0x0 0xf8028000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+			status = "disabled";
+
+			uart3: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(6))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(7))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			spi3: spi@400 {
+				compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				clock-names = "spi_clk";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(6))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(7))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(6))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(7))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		gmac: ethernet@f802c000 {
+			compatible = "microchip,sam9x7-gem", "microchip,sama7g5-gem";
+			reg = <0xf802c000 0x1000>;
+			interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>,	/* Queue 0 */
+				     <60 IRQ_TYPE_LEVEL_HIGH 3>,	/* Queue 1 */
+				     <61 IRQ_TYPE_LEVEL_HIGH 3>,	/* Queue 2 */
+				     <62 IRQ_TYPE_LEVEL_HIGH 3>,	/* Queue 3 */
+				     <63 IRQ_TYPE_LEVEL_HIGH 3>,	/* Queue 4 */
+				     <64 IRQ_TYPE_LEVEL_HIGH 3>;	/* Queue 5 */
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_GCK 24>, <&pmc PMC_TYPE_GCK 67>;
+			clock-names = "hclk", "pclk", "tx_clk", "tsu_clk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 67>;
+			assigned-clock-rates = <266666666>;
+			status = "disabled";
+		};
+
+		pwm0: pwm@f8034000 {
+			compatible = "microchip,sam9x7-pwm", "microchip,sam9x60-pwm";
+			reg = <0xf8034000 0x300>;
+			interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		hlcdc: hlcdc@f8038000 {
+			compatible = "microchip,sam9x75-xlcdc";
+			reg = <0xf8038000 0x4000>;
+			interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_GCK 25>, <&clk32k 1>;
+			clock-names = "periph_clk", "sys_clk", "slow_clk";
+			status = "disabled";
+
+			display-controller {
+				compatible = "atmel,hlcdc-display-controller";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+
+			pwm {
+				compatible = "atmel,hlcdc-pwm";
+				#pwm-cells = <3>;
+			};
+		};
+
+		flx9: flexcom@f8040000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf8040000 0x200>;
+			ranges = <0x0 0xf8040000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+			status = "disabled";
+
+			uart9: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(18))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(19))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			i2c9: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(18))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(19))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		flx10: flexcom@f8044000 {
+			compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xf8044000 0x200>;
+			ranges = <0x0 0xf8044000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+			status = "disabled";
+
+			uart10: serial@200 {
+				compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+				clock-names = "usart";
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(20))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(21))>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			i2c10: i2c@600 {
+				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(20))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) |
+					 AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(21))>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		lvds_controller: lvds-controller@f8060000 {
+			compatible = "microchip,sam9x75-lvds";
+			reg = <0xf8060000 0x100>;
+			interrupts = <56 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 56>;
+			clock-names = "pclk";
+			status = "disabled";
+		};
+
+		matrix: matrix@ffffde00 {
+			compatible = "microchip,sam9x7-matrix", "atmel,at91sam9x5-matrix", "syscon";
+			reg = <0xffffde00 0x200>;
+		};
+
+		pmecc: ecc-engine@ffffe000 {
+			compatible = "microchip,sam9x7-pmecc", "atmel,at91sam9g45-pmecc";
+			reg = <0xffffe000 0x300>, <0xffffe600 0x100>;
+		};
+
+		mpddrc: mpddrc@ffffe800 {
+			compatible = "microchip,sam9x7-ddramc", "atmel,sama5d3-ddramc";
+			reg = <0xffffe800 0x200>;
+			clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_CORE PMC_MCK>;
+			clock-names = "ddrck", "mpddr";
+		};
+
+		smc: smc@ffffea00 {
+			compatible = "microchip,sam9x7-smc", "atmel,at91sam9260-smc", "syscon";
+			reg = <0xffffea00 0x100>;
+		};
+
+		aic: interrupt-controller@fffff100 {
+			compatible = "microchip,sam9x7-aic";
+			reg = <0xfffff100 0x100>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			atmel,external-irqs = <31>;
+		};
+
+		dbgu: serial@fffff200 {
+			compatible = "microchip,sam9x7-dbgu", "atmel,at91sam9260-dbgu", "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+			reg = <0xfffff200 0x200>;
+			interrupts = <47 IRQ_TYPE_LEVEL_HIGH 7>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
+			clock-names = "usart";
+			dmas = <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				 AT91_XDMAC_DT_PERID(28))>,
+			       <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				 AT91_XDMAC_DT_PERID(29))>;
+			dma-names = "tx", "rx";
+			atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+			status = "disabled";
+		};
+
+		pinctrl: pinctrl@fffff400 {
+			compatible = "microchip,sam9x7-pinctrl", "microchip,sam9x60-pinctrl", "simple-mfd";
+			ranges = <0xfffff400 0xfffff400 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			/* mux-mask corresponding to sam9x7 SoC in TFBGA228L package */
+			atmel,mux-mask = <
+					 /*  A		B	   C	      D	  */
+					 0xffffffff 0xffffefc0 0xc0ffd000 0x00000000	/* pioA */
+					 0x07ffffff 0x0805fe7f 0x01ff9f81 0x06078000	/* pioB */
+					 0xffffffff 0x07dfffff 0xfa3fffff 0x00000000	/* pioC */
+					 0x00003fff 0x00003fe0 0x0000003f 0x00000000	/* pioD */
+					 >;
+
+			pioA: gpio@fffff400 {
+				compatible = "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfffff400 0x200>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				#gpio-cells = <2>;
+				gpio-controller;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+			};
+
+			pioB: gpio@fffff600 {
+				compatible = "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfffff600 0x200>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				#gpio-cells = <2>;
+				gpio-controller;
+				#gpio-lines = <26>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+			};
+
+			pioC: gpio@fffff800 {
+				compatible = "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfffff800 0x200>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				#gpio-cells = <2>;
+				gpio-controller;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
+			};
+
+			pioD: gpio@fffffa00 {
+				compatible = "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
+				reg = <0xfffffa00 0x200>;
+				interrupts = <44 IRQ_TYPE_LEVEL_HIGH 1>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				#gpio-cells = <2>;
+				gpio-controller;
+				#gpio-lines = <22>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 44>;
+			};
+		};
+
+		pmc: clock-controller@fffffc00 {
+			compatible = "microchip,sam9x7-pmc", "syscon";
+			reg = <0xfffffc00 0x200>;
+			interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+			#clock-cells = <2>;
+			clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>;
+			clock-names = "td_slck", "md_slck", "main_xtal";
+		};
+
+		reset_controller: reset-controller@fffffe00 {
+			compatible = "microchip,sam9x7-rstc", "microchip,sam9x60-rstc";
+			reg = <0xfffffe00 0x10>;
+			clocks = <&clk32k 0>;
+		};
+
+		poweroff: poweroff@fffffe10 {
+			compatible = "microchip,sam9x7-shdwc", "microchip,sam9x60-shdwc";
+			reg = <0xfffffe10 0x10>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clk32k 0>;
+			atmel,wakeup-rtc-timer;
+			atmel,wakeup-rtt-timer;
+			status = "disabled";
+		};
+
+		rtt: rtc@fffffe20 {
+			compatible = "microchip,sam9x7-rtt", "atmel,at91sam9260-rtt";
+			reg = <0xfffffe20 0x20>;
+			interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+			clocks = <&clk32k 0>;
+		};
+
+		clk32k: clock-controller@fffffe50 {
+			compatible = "microchip,sam9x7-sckc", "microchip,sam9x60-sckc";
+			reg = <0xfffffe50 0x4>;
+			clocks = <&slow_xtal>;
+			#clock-cells = <1>;
+		};
+
+		gpbr: syscon@fffffe60 {
+			compatible = "microchip,sam9x7-gpbr", "atmel,at91sam9260-gpbr", "syscon";
+			reg = <0xfffffe60 0x10>;
+		};
+
+		rtc: rtc@fffffea8 {
+			compatible = "microchip,sam9x7-rtc", "microchip,sam9x60-rtc";
+			reg = <0xfffffea8 0x100>;
+			interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+			clocks = <&clk32k 0>;
+		};
+
+		watchdog: watchdog@ffffff80 {
+			compatible = "microchip,sam9x7-wdt", "microchip,sam9x60-wdt";
+			reg = <0xffffff80 0x24>;
+			interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama5d2-pinfunc.h b/arch/arm/boot/dts/microchip/sama5d2-pinfunc.h
index 28a2e45752fe..28a2e45752fe 100644
--- a/arch/arm/boot/dts/sama5d2-pinfunc.h
+++ b/arch/arm/boot/dts/microchip/sama5d2-pinfunc.h
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/microchip/sama5d2.dtsi
index 801969c113d6..fde890f18d20 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d2.dtsi
@@ -9,6 +9,7 @@
 #include <dt-bindings/dma/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 #include <dt-bindings/iio/adc/at91-sama5d2_adc.h>
 
 / {
@@ -31,6 +32,8 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a5";
 			reg = <0>;
+			d-cache-size = <0x8000>;	// L1, 32 KB
+			i-cache-size = <0x8000>;	// L1, 32 KB
 			next-level-cache = <&L2>;
 		};
 	};
@@ -99,6 +102,16 @@
 		ranges = <0 0x00200000 0x20000>;
 	};
 
+	resistive_touch: resistive-touch {
+		compatible = "resistive-adc-touch";
+		io-channels = <&adc AT91_SAMA5D2_ADC_X_CHANNEL>,
+			      <&adc AT91_SAMA5D2_ADC_Y_CHANNEL>,
+			      <&adc AT91_SAMA5D2_ADC_P_CHANNEL>;
+		io-channel-names = "x", "y", "pressure";
+		touchscreen-min-pressure = <50000>;
+		status = "disabled";
+	};
+
 	ahb {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -125,7 +138,7 @@
 			status = "disabled";
 		};
 
-		usb1: ohci@400000 {
+		usb1: usb@400000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00400000 0x100000>;
 			interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -134,7 +147,7 @@
 			status = "disabled";
 		};
 
-		usb2: ehci@500000 {
+		usb2: usb@500000 {
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00500000 0x100000>;
 			interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -149,6 +162,7 @@
 			interrupts = <63 IRQ_TYPE_LEVEL_HIGH 4>;
 			cache-unified;
 			cache-level = <2>;
+			cache-size = <0x20000>;		// L2, 128 KB
 		};
 
 		ebi: ebi@10000000 {
@@ -273,7 +287,7 @@
 				clock-names = "dma_clk";
 			};
 
-			pmc: pmc@f0014000 {
+			pmc: clock-controller@f0014000 {
 				compatible = "atmel,sama5d2-pmc", "syscon";
 				reg = <0xf0014000 0x160>;
 				interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -288,6 +302,7 @@
 				reg-names = "qspi_base", "qspi_mmap";
 				interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 52>;
+				clock-names = "pclk";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -299,12 +314,13 @@
 				reg-names = "qspi_base", "qspi_mmap";
 				interrupts = <53 IRQ_TYPE_LEVEL_HIGH 7>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 53>;
+				clock-names = "pclk";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
 			};
 
-			sha@f0028000 {
+			sha: crypto@f0028000 {
 				compatible = "atmel,at91sam9g46-sha";
 				reg = <0xf0028000 0x100>;
 				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -314,10 +330,9 @@
 				dma-names = "tx";
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
 				clock-names = "sha_clk";
-				status = "okay";
 			};
 
-			aes@f002c000 {
+			aes: crypto@f002c000 {
 				compatible = "atmel,at91sam9g46-aes";
 				reg = <0xf002c000 0x100>;
 				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -330,7 +345,6 @@
 				dma-names = "tx", "rx";
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
 				clock-names = "aes_clk";
-				status = "okay";
 			};
 
 			spi0: spi@f8000000 {
@@ -371,11 +385,9 @@
 			macb0: ethernet@f8008000 {
 				compatible = "atmel,sama5d2-gem";
 				reg = <0xf8008000 0x1000>;
-				interrupts = <5  IRQ_TYPE_LEVEL_HIGH 3		/* Queue 0 */
-					      66 IRQ_TYPE_LEVEL_HIGH 3          /* Queue 1 */
-					      67 IRQ_TYPE_LEVEL_HIGH 3>;        /* Queue 2 */
-				#address-cells = <1>;
-				#size-cells = <0>;
+				interrupts = <5  IRQ_TYPE_LEVEL_HIGH 3>,	/* Queue 0 */
+					     <66 IRQ_TYPE_LEVEL_HIGH 3>,	/* Queue 1 */
+					     <67 IRQ_TYPE_LEVEL_HIGH 3>;        /* Queue 2 */
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>, <&pmc PMC_TYPE_PERIPHERAL 5>;
 				clock-names = "hclk", "pclk";
 				status = "disabled";
@@ -413,7 +425,7 @@
 				pmecc: ecc-engine@f8014070 {
 					compatible = "atmel,sama5d2-pmecc";
 					reg = <0xf8014070 0x490>,
-					      <0xf8014500 0x100>;
+					      <0xf8014500 0x200>;
 				};
 			};
 
@@ -433,6 +445,7 @@
 			uart0: serial@f801c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf801c000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 7>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
@@ -449,6 +462,7 @@
 			uart1: serial@f8020000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8020000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 7>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
@@ -465,6 +479,7 @@
 			uart2: serial@f8024000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8024000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 7>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
@@ -522,6 +537,7 @@
 				uart5: serial@200 {
 					compatible = "atmel,at91sam9260-usart";
 					reg = <0x200 0x200>;
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
 					clock-names = "usart";
@@ -555,7 +571,7 @@
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(12))>;
 					dma-names = "tx", "rx";
-					atmel,fifo-size = <16>;
+					atmel,fifo-size = <32>;
 					status = "disabled";
 				};
 
@@ -592,6 +608,7 @@
 				uart6: serial@200 {
 					compatible = "atmel,at91sam9260-usart";
 					reg = <0x200 0x200>;
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
 					clock-names = "usart";
@@ -625,7 +642,7 @@
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(14))>;
 					dma-names = "tx", "rx";
-					atmel,fifo-size = <16>;
+					atmel,fifo-size = <32>;
 					status = "disabled";
 				};
 
@@ -660,13 +677,13 @@
 				ranges = <0 0xf8044000 0x1420>;
 			};
 
-			reset_controller: rstc@f8048000 {
+			reset_controller: reset-controller@f8048000 {
 				compatible = "atmel,sama5d3-rstc";
 				reg = <0xf8048000 0x10>;
 				clocks = <&clk32k>;
 			};
 
-			shutdown_controller: shdwc@f8048010 {
+			shutdown_controller: poweroff@f8048010 {
 				compatible = "atmel,sama5d2-shdwc";
 				reg = <0xf8048010 0x10>;
 				clocks = <&clk32k>;
@@ -690,10 +707,9 @@
 				status = "disabled";
 			};
 
-			clk32k: sckc@f8048050 {
+			clk32k: clock-controller@f8048050 {
 				compatible = "atmel,sama5d4-sckc";
 				reg = <0xf8048050 0x4>;
-
 				clocks = <&slow_xtal>;
 				#clock-cells = <0>;
 			};
@@ -761,6 +777,7 @@
 			uart3: serial@fc008000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfc008000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 7>;
 				dmas = <&dma1
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
@@ -777,6 +794,7 @@
 			uart4: serial@fc00c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfc00c000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
 					 AT91_XDMAC_DT_PERID(43))>,
@@ -802,6 +820,7 @@
 				uart7: serial@200 {
 					compatible = "atmel,at91sam9260-usart";
 					reg = <0x200 0x200>;
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					interrupts = <21 IRQ_TYPE_LEVEL_HIGH 7>;
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
 					clock-names = "usart";
@@ -835,7 +854,7 @@
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(16))>;
 					dma-names = "tx", "rx";
-					atmel,fifo-size = <16>;
+					atmel,fifo-size = <32>;
 					status = "disabled";
 				};
 
@@ -872,6 +891,7 @@
 				uart8: serial@200 {
 					compatible = "atmel,at91sam9260-usart";
 					reg = <0x200 0x200>;
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
 					clock-names = "usart";
@@ -905,7 +925,7 @@
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(18))>;
 					dma-names = "tx", "rx";
-					atmel,fifo-size = <16>;
+					atmel,fifo-size = <32>;
 					status = "disabled";
 				};
 
@@ -943,6 +963,7 @@
 				uart9: serial@200 {
 					compatible = "atmel,at91sam9260-usart";
 					reg = <0x200 0x200>;
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
 					clock-names = "usart";
@@ -976,7 +997,7 @@
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(20))>;
 					dma-names = "tx", "rx";
-					atmel,fifo-size = <16>;
+					atmel,fifo-size = <32>;
 					status = "disabled";
 				};
 
@@ -1001,7 +1022,7 @@
 				};
 			};
 
-			trng@fc01c000 {
+			trng: rng@fc01c000 {
 				compatible = "atmel,at91sam9g45-trng";
 				reg = <0xfc01c000 0x100>;
 				interrupts = <47 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -1050,16 +1071,6 @@
 				status = "disabled";
 			};
 
-			resistive_touch: resistive-touch {
-				compatible = "resistive-adc-touch";
-				io-channels = <&adc AT91_SAMA5D2_ADC_X_CHANNEL>,
-					      <&adc AT91_SAMA5D2_ADC_Y_CHANNEL>,
-					      <&adc AT91_SAMA5D2_ADC_P_CHANNEL>;
-				io-channel-names = "x", "y", "pressure";
-				touchscreen-min-pressure = <50000>;
-				status = "disabled";
-			};
-
 			pioA: pinctrl@fc038000 {
 				compatible = "atmel,sama5d2-pinctrl";
 				reg = <0xfc038000 0x600>;
@@ -1082,7 +1093,7 @@
 				#gpio-cells = <2>;
 			};
 
-			tdes@fc044000 {
+			tdes: crypto@fc044000 {
 				compatible = "atmel,at91sam9g46-tdes";
 				reg = <0xfc044000 0x100>;
 				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -1095,7 +1106,6 @@
 				dma-names = "tx", "rx";
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
 				clock-names = "tdes_clk";
-				status = "okay";
 			};
 
 			classd: classd@fc048000 {
@@ -1125,7 +1135,7 @@
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 55>, <&pmc PMC_TYPE_GCK 55>;
 				clock-names = "pclk", "gclk";
 				assigned-clocks = <&pmc PMC_TYPE_CORE PMC_I2S1_MUX>;
-				assigned-parrents = <&pmc PMC_TYPE_GCK 55>;
+				assigned-clock-parents = <&pmc PMC_TYPE_GCK 55>;
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/microchip/sama5d29.dtsi b/arch/arm/boot/dts/microchip/sama5d29.dtsi
new file mode 100644
index 000000000000..17991c28a256
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama5d29.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sama5d29.dtsi - Device Tree Include file for SAMA5D29 SoC of the SAMA5D2
+ * family.
+ *
+ *  Copyright (C) 2021 Microchip Technology, Inc. and its subsidiaries
+ *
+ *  Author: Hari Prasath <Hari.PrasathGE@microchip.com>
+ *
+ */
+
+#include "sama5d2.dtsi"
+
+&macb0 {
+	compatible = "atmel,sama5d29-gem";
+};
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/microchip/sama5d3.dtsi
index d1841bffe3c5..00ba59ac1968 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d3.dtsi
@@ -12,6 +12,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
 	#address-cells = <1>;
@@ -47,6 +48,8 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a5";
 			reg = <0x0>;
+			d-cache-size = <0x8000>;	// L1, 32 KB
+			i-cache-size = <0x8000>;	// L1, 32 KB
 		};
 	};
 
@@ -73,7 +76,7 @@
 			clock-frequency = <0>;
 		};
 
-		adc_op_clk: adc_op_clk{
+		adc_op_clk: adc_op_clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <1000000>;
@@ -194,6 +197,7 @@
 			usart0: serial@f001c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf001c000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>;
 				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>,
 				       <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
@@ -208,6 +212,7 @@
 			usart1: serial@f0020000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf0020000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 5>;
 				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(5)>,
 				       <&dma0 2 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
@@ -222,6 +227,7 @@
 			uart0: serial@f0024000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf0024000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart0>;
@@ -356,6 +362,7 @@
 			usart2: serial@f8020000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8020000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
 				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(7)>,
 				       <&dma1 2 (AT91_DMA_CFG_PER_ID(8) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
@@ -370,6 +377,7 @@
 			usart3: serial@f8024000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8024000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
 				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(9)>,
 				       <&dma1 2 (AT91_DMA_CFG_PER_ID(10) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
@@ -381,7 +389,7 @@
 				status = "disabled";
 			};
 
-			sha@f8034000 {
+			sha: crypto@f8034000 {
 				compatible = "atmel,at91sam9g46-sha";
 				reg = <0xf8034000 0x100>;
 				interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -391,7 +399,7 @@
 				clock-names = "sha_clk";
 			};
 
-			aes@f8038000 {
+			aes: crypto@f8038000 {
 				compatible = "atmel,at91sam9g46-aes";
 				reg = <0xf8038000 0x100>;
 				interrupts = <43 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -402,7 +410,7 @@
 				clock-names = "aes_clk";
 			};
 
-			tdes@f803c000 {
+			tdes: crypto@f803c000 {
 				compatible = "atmel,at91sam9g46-tdes";
 				reg = <0xf803c000 0x100>;
 				interrupts = <44 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -413,7 +421,7 @@
 				clock-names = "tdes_clk";
 			};
 
-			trng@f8040000 {
+			trng: rng@f8040000 {
 				compatible = "atmel,at91sam9g45-trng";
 				reg = <0xf8040000 0x100>;
 				interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -464,6 +472,7 @@
 			dbgu: serial@ffffee00 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xffffee00 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>;
 				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(13)>,
 				       <&dma1 2 (AT91_DMA_CFG_PER_ID(14) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
@@ -486,7 +495,7 @@
 			pinctrl: pinctrl@fffff200 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus";
+				compatible = "atmel,sama5d3-pinctrl", "simple-mfd";
 				ranges = <0xfffff200 0xfffff200 0xa00>;
 				atmel,mux-mask = <
 					/*   A          B          C  */
@@ -994,7 +1003,7 @@
 				};
 			};
 
-			pmc: pmc@fffffc00 {
+			pmc: clock-controller@fffffc00 {
 				compatible = "atmel,sama5d3-pmc", "syscon";
 				reg = <0xfffffc00 0x120>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -1003,13 +1012,13 @@
 				clock-names = "slow_clk", "main_xtal";
 			};
 
-			reset_controller: rstc@fffffe00 {
+			reset_controller: reset-controller@fffffe00 {
 				compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc";
 				reg = <0xfffffe00 0x10>;
 				clocks = <&clk32k>;
 			};
 
-			shutdown_controller: shutdown-controller@fffffe10 {
+			shutdown_controller: poweroff@fffffe10 {
 				compatible = "atmel,at91sam9x5-shdwc";
 				reg = <0xfffffe10 0x10>;
 				clocks = <&clk32k>;
@@ -1033,7 +1042,7 @@
 				status = "disabled";
 			};
 
-			clk32k: sckc@fffffe50 {
+			clk32k: clock-controller@fffffe50 {
 				compatible = "atmel,sama5d3-sckc";
 				reg = <0xfffffe50 0x4>;
 				clocks = <&slow_xtal>;
@@ -1067,7 +1076,7 @@
 			status = "disabled";
 		};
 
-		usb1: ohci@600000 {
+		usb1: usb@600000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00600000 0x100000>;
 			interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -1076,7 +1085,7 @@
 			status = "disabled";
 		};
 
-		usb2: ehci@700000 {
+		usb2: usb@700000 {
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00700000 0x100000>;
 			interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
diff --git a/arch/arm/boot/dts/sama5d31.dtsi b/arch/arm/boot/dts/microchip/sama5d31.dtsi
index cbe8f275ecc4..cbe8f275ecc4 100644
--- a/arch/arm/boot/dts/sama5d31.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d31.dtsi
diff --git a/arch/arm/boot/dts/sama5d31ek.dts b/arch/arm/boot/dts/microchip/sama5d31ek.dts
index 10fc80d6d30d..1f2dfb3127ab 100644
--- a/arch/arm/boot/dts/sama5d31ek.dts
+++ b/arch/arm/boot/dts/microchip/sama5d31ek.dts
@@ -40,7 +40,7 @@
 	};
 
 	leds {
-		d3 {
+		led-d3 {
 			label = "d3";
 			gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/sama5d33.dtsi b/arch/arm/boot/dts/microchip/sama5d33.dtsi
index 146fd59acea5..146fd59acea5 100644
--- a/arch/arm/boot/dts/sama5d33.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d33.dtsi
diff --git a/arch/arm/boot/dts/sama5d33ek.dts b/arch/arm/boot/dts/microchip/sama5d33ek.dts
index 7d4ae1682933..7d4ae1682933 100644
--- a/arch/arm/boot/dts/sama5d33ek.dts
+++ b/arch/arm/boot/dts/microchip/sama5d33ek.dts
diff --git a/arch/arm/boot/dts/sama5d34.dtsi b/arch/arm/boot/dts/microchip/sama5d34.dtsi
index 132918c889a0..132918c889a0 100644
--- a/arch/arm/boot/dts/sama5d34.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d34.dtsi
diff --git a/arch/arm/boot/dts/sama5d34ek.dts b/arch/arm/boot/dts/microchip/sama5d34ek.dts
index 2335bf906f69..18943b873fff 100644
--- a/arch/arm/boot/dts/sama5d34ek.dts
+++ b/arch/arm/boot/dts/microchip/sama5d34ek.dts
@@ -36,7 +36,7 @@
 			i2c1: i2c@f0018000 {
 				status = "okay";
 
-				24c256@50 {
+				eeprom@50 {
 					compatible = "atmel,24c256";
 					reg = <0x50>;
 					pagesize = <64>;
@@ -50,7 +50,7 @@
 	};
 
 	leds {
-		d3 {
+		led-d3 {
 			label = "d3";
 			gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/sama5d35.dtsi b/arch/arm/boot/dts/microchip/sama5d35.dtsi
index b2ccfa77c4be..b2ccfa77c4be 100644
--- a/arch/arm/boot/dts/sama5d35.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d35.dtsi
diff --git a/arch/arm/boot/dts/sama5d35ek.dts b/arch/arm/boot/dts/microchip/sama5d35ek.dts
index 8edfcebb1df0..8edfcebb1df0 100644
--- a/arch/arm/boot/dts/sama5d35ek.dts
+++ b/arch/arm/boot/dts/microchip/sama5d35ek.dts
diff --git a/arch/arm/boot/dts/sama5d36.dtsi b/arch/arm/boot/dts/microchip/sama5d36.dtsi
index 5d88f9967138..5d88f9967138 100644
--- a/arch/arm/boot/dts/sama5d36.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d36.dtsi
diff --git a/arch/arm/boot/dts/sama5d36ek.dts b/arch/arm/boot/dts/microchip/sama5d36ek.dts
index 26950f9284c2..26950f9284c2 100644
--- a/arch/arm/boot/dts/sama5d36ek.dts
+++ b/arch/arm/boot/dts/microchip/sama5d36ek.dts
diff --git a/arch/arm/boot/dts/sama5d36ek_cmp.dts b/arch/arm/boot/dts/microchip/sama5d36ek_cmp.dts
index 66695b9a3e77..66695b9a3e77 100644
--- a/arch/arm/boot/dts/sama5d36ek_cmp.dts
+++ b/arch/arm/boot/dts/microchip/sama5d36ek_cmp.dts
diff --git a/arch/arm/boot/dts/sama5d3_can.dtsi b/arch/arm/boot/dts/microchip/sama5d3_can.dtsi
index 9ac29bf3f933..9ac29bf3f933 100644
--- a/arch/arm/boot/dts/sama5d3_can.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d3_can.dtsi
diff --git a/arch/arm/boot/dts/sama5d3_emac.dtsi b/arch/arm/boot/dts/microchip/sama5d3_emac.dtsi
index 45226108850d..5d7ce13de8cc 100644
--- a/arch/arm/boot/dts/sama5d3_emac.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d3_emac.dtsi
@@ -30,7 +30,7 @@
 				};
 			};
 
-			pmc: pmc@fffffc00 {
+			pmc: clock-controller@fffffc00 {
 			};
 
 			macb1: ethernet@f802c000 {
diff --git a/arch/arm/boot/dts/sama5d3_gmac.dtsi b/arch/arm/boot/dts/microchip/sama5d3_gmac.dtsi
index 884df7a54dbb..884df7a54dbb 100644
--- a/arch/arm/boot/dts/sama5d3_gmac.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d3_gmac.dtsi
diff --git a/arch/arm/boot/dts/sama5d3_lcd.dtsi b/arch/arm/boot/dts/microchip/sama5d3_lcd.dtsi
index 308d2fc276d6..308d2fc276d6 100644
--- a/arch/arm/boot/dts/sama5d3_lcd.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d3_lcd.dtsi
diff --git a/arch/arm/boot/dts/sama5d3_mci2.dtsi b/arch/arm/boot/dts/microchip/sama5d3_mci2.dtsi
index 7141ee97ec3e..7141ee97ec3e 100644
--- a/arch/arm/boot/dts/sama5d3_mci2.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d3_mci2.dtsi
diff --git a/arch/arm/boot/dts/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/microchip/sama5d3_tcb1.dtsi
index 2b18c5c2cc03..2b18c5c2cc03 100644
--- a/arch/arm/boot/dts/sama5d3_tcb1.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d3_tcb1.dtsi
diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/microchip/sama5d3_uart.dtsi
index a3eaba995cf4..44d1173f2ffb 100644
--- a/arch/arm/boot/dts/sama5d3_uart.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d3_uart.dtsi
@@ -9,6 +9,7 @@
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
 	aliases {
@@ -39,6 +40,7 @@
 			uart0: serial@f0024000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf0024000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart0>;
@@ -50,6 +52,7 @@
 			uart1: serial@f8028000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8028000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart1>;
diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/microchip/sama5d3xcm.dtsi
index 384335635792..7d1d7859edb4 100644
--- a/arch/arm/boot/dts/sama5d3xcm.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d3xcm.dtsi
@@ -130,7 +130,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		d2 {
+		led-d2 {
 			label = "d2";
 			gpios = <&pioE 25 GPIO_ACTIVE_LOW>;	/* PE25, conflicts with A25, RXD2 */
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi b/arch/arm/boot/dts/microchip/sama5d3xcm_cmp.dtsi
index 5579c955f141..362806afef44 100644
--- a/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d3xcm_cmp.dtsi
@@ -79,7 +79,7 @@
 			};
 
 			i2c1: i2c@f0018000 {
-				pmic: act8865@5b {
+				act8865: pmic@5b {
 					compatible = "active-semi,act8865";
 					reg = <0x5b>;
 					status = "disabled";
@@ -184,7 +184,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		d2 {
+		led-d2 {
 			label = "d2";
 			gpios = <&pioE 25 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/sama5d3xdm.dtsi b/arch/arm/boot/dts/microchip/sama5d3xdm.dtsi
index 3c1c4d62fbf9..3c1c4d62fbf9 100644
--- a/arch/arm/boot/dts/sama5d3xdm.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d3xdm.dtsi
diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/microchip/sama5d3xmb.dtsi
index a499de8a7a64..90da04b84b39 100644
--- a/arch/arm/boot/dts/sama5d3xmb.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d3xmb.dtsi
@@ -26,7 +26,7 @@
 			spi0: spi@f0004000 {
 				dmas = <0>, <0>;	/*  Do not use DMA for spi0 */
 
-				m25p80@0 {
+				flash@0 {
 					compatible = "atmel,at25df321a";
 					spi-max-frequency = <50000000>;
 					reg = <0>;
@@ -172,7 +172,7 @@
 			status = "okay";
 		};
 
-		usb1: ohci@600000 {
+		usb1: usb@600000 {
 			num-ports = <3>;
 			atmel,vbus-gpio = <&pioD 25 GPIO_ACTIVE_HIGH
 					   &pioD 26 GPIO_ACTIVE_LOW
@@ -181,7 +181,7 @@
 			status = "okay";
 		};
 
-		usb2: ehci@700000 {
+		usb2: usb@700000 {
 			status = "okay";
 		};
 	};
diff --git a/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi b/arch/arm/boot/dts/microchip/sama5d3xmb_cmp.dtsi
index fa9e5e2a745d..5d9e97fecf83 100644
--- a/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d3xmb_cmp.dtsi
@@ -25,7 +25,7 @@
 			spi0: spi@f0004000 {
 				dmas = <0>, <0>;	/*  Do not use DMA for spi0 */
 
-				m25p80@0 {
+				flash@0 {
 					compatible = "atmel,at25df321a";
 					spi-max-frequency = <50000000>;
 					reg = <0>;
diff --git a/arch/arm/boot/dts/sama5d3xmb_emac.dtsi b/arch/arm/boot/dts/microchip/sama5d3xmb_emac.dtsi
index a5dd41cd9522..a5dd41cd9522 100644
--- a/arch/arm/boot/dts/sama5d3xmb_emac.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d3xmb_emac.dtsi
diff --git a/arch/arm/boot/dts/sama5d3xmb_gmac.dtsi b/arch/arm/boot/dts/microchip/sama5d3xmb_gmac.dtsi
index d750da38ff3c..d750da38ff3c 100644
--- a/arch/arm/boot/dts/sama5d3xmb_gmac.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d3xmb_gmac.dtsi
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/microchip/sama5d4.dtsi
index f6e3e6f57252..ec1d68c640de 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d4.dtsi
@@ -8,6 +8,7 @@
 
 #include <dt-bindings/clock/at91.h>
 #include <dt-bindings/dma/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
@@ -49,6 +50,8 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a5";
 			reg = <0>;
+			d-cache-size = <0x8000>;	// L1, 32 KB
+			i-cache-size = <0x8000>;	// L1, 32 KB
 			next-level-cache = <&L2>;
 		};
 	};
@@ -71,7 +74,7 @@
 			clock-frequency = <0>;
 		};
 
-		adc_op_clk: adc_op_clk{
+		adc_op_clk: adc_op_clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <1000000>;
@@ -118,7 +121,7 @@
 			status = "disabled";
 		};
 
-		usb1: ohci@500000 {
+		usb1: usb@500000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00500000 0x100000>;
 			interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -127,7 +130,7 @@
 			status = "disabled";
 		};
 
-		usb2: ehci@600000 {
+		usb2: usb@600000 {
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00600000 0x100000>;
 			interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
@@ -142,6 +145,7 @@
 			interrupts = <67 IRQ_TYPE_LEVEL_HIGH 4>;
 			cache-unified;
 			cache-level = <2>;
+			cache-size = <0x20000>;		// L2, 128 KB
 		};
 
 		ebi: ebi@10000000 {
@@ -249,7 +253,7 @@
 				clock-names = "dma_clk";
 			};
 
-			pmc: pmc@f0018000 {
+			pmc: clock-controller@f0018000 {
 				compatible = "atmel,sama5d4-pmc", "syscon";
 				reg = <0xf0018000 0x120>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -278,6 +282,7 @@
 			uart0: serial@f8004000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8004000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 5>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
@@ -437,6 +442,7 @@
 			usart0: serial@f802c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf802c000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
@@ -455,6 +461,7 @@
 			usart1: serial@f8030000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8030000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
@@ -490,6 +497,7 @@
 			uart1: serial@fc004000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfc004000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
@@ -508,6 +516,7 @@
 			usart2: serial@fc008000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfc008000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>;
 				dmas = <&dma1
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
@@ -526,6 +535,7 @@
 			usart3: serial@fc00c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfc00c000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <30 IRQ_TYPE_LEVEL_HIGH 5>;
 				dmas = <&dma1
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
@@ -544,6 +554,7 @@
 			usart4: serial@fc010000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfc010000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <31 IRQ_TYPE_LEVEL_HIGH 5>;
 				dmas = <&dma1
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
@@ -650,7 +661,7 @@
 				status = "disabled";
 			};
 
-			trng@fc030000 {
+			trng: rng@fc030000 {
 				compatible = "atmel,at91sam9g45-trng";
 				reg = <0xfc030000 0x100>;
 				interrupts = <53 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -673,7 +684,7 @@
 				status = "disabled";
 			};
 
-			aes@fc044000 {
+			aes: crypto@fc044000 {
 				compatible = "atmel,at91sam9g46-aes";
 				reg = <0xfc044000 0x100>;
 				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -684,10 +695,9 @@
 				dma-names = "tx", "rx";
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
 				clock-names = "aes_clk";
-				status = "okay";
 			};
 
-			tdes@fc04c000 {
+			tdes: crypto@fc04c000 {
 				compatible = "atmel,at91sam9g46-tdes";
 				reg = <0xfc04c000 0x100>;
 				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -698,10 +708,9 @@
 				dma-names = "tx", "rx";
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
 				clock-names = "tdes_clk";
-				status = "okay";
 			};
 
-			sha@fc050000 {
+			sha: crypto@fc050000 {
 				compatible = "atmel,at91sam9g46-sha";
 				reg = <0xfc050000 0x100>;
 				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -710,7 +719,6 @@
 				dma-names = "tx";
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
 				clock-names = "sha_clk";
-				status = "okay";
 			};
 
 			hsmc: smc@fc05c000 {
@@ -729,13 +737,13 @@
 				};
 			};
 
-			reset_controller: rstc@fc068600 {
+			reset_controller: reset-controller@fc068600 {
 				compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc";
 				reg = <0xfc068600 0x10>;
 				clocks = <&clk32k>;
 			};
 
-			shutdown_controller: shdwc@fc068610 {
+			shutdown_controller: poweroff@fc068610 {
 				compatible = "atmel,at91sam9x5-shdwc";
 				reg = <0xfc068610 0x10>;
 				clocks = <&clk32k>;
@@ -756,7 +764,7 @@
 				status = "disabled";
 			};
 
-			clk32k: sckc@fc068650 {
+			clk32k: clock-controller@fc068650 {
 				compatible = "atmel,sama5d4-sckc";
 				reg = <0xfc068650 0x4>;
 				#clock-cells = <0>;
@@ -773,6 +781,7 @@
 			dbgu: serial@fc069000 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfc069000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <45 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
@@ -785,7 +794,7 @@
 			pinctrl: pinctrl@fc06a000 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus";
+				compatible = "atmel,sama5d3-pinctrl", "simple-mfd";
 				ranges = <0xfc068000 0xfc068000 0x100
 					  0xfc06a000 0xfc06a000 0x4000>;
 				/* WARNING: revisit as pin spec has changed */
diff --git a/arch/arm/boot/dts/microchip/sama7d65-pinfunc.h b/arch/arm/boot/dts/microchip/sama7d65-pinfunc.h
new file mode 100644
index 000000000000..c591f333cacb
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama7d65-pinfunc.h
@@ -0,0 +1,947 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+#define PINMUX_PIN(no, func, ioset) \
+(((no) & 0xffff) | (((func) & 0xf) << 16) | (((ioset) & 0xff) << 20))
+
+#define PIN_PA0				0
+#define PIN_PA0__GPIO			PINMUX_PIN(PIN_PA0, 0, 0)
+#define PIN_PA0__SDMMC0_CK		PINMUX_PIN(PIN_PA0, 1, 1)
+#define PIN_PA0__FLEXCOM3_IO0		PINMUX_PIN(PIN_PA0, 2, 1)
+#define PIN_PA0__NWER0			PINMUX_PIN(PIN_PA0, 3, 1)
+
+#define PIN_PA1				1
+#define PIN_PA1__GPIO			PINMUX_PIN(PIN_PA1, 0, 0)
+#define PIN_PA1__SDMMC0_CMD		PINMUX_PIN(PIN_PA1, 1, 1)
+#define PIN_PA1__FLEXCOM3_IO1		PINMUX_PIN(PIN_PA1, 2, 1)
+#define PIN_PA1__A21			PINMUX_PIN(PIN_PA1, 3, 1)
+
+#define PIN_PA2				2
+#define PIN_PA2__GPIO			PINMUX_PIN(PIN_PA2, 0, 0)
+#define PIN_PA2__SDMMC0_RSTN		PINMUX_PIN(PIN_PA2, 1, 1)
+#define PIN_PA2__FLEXCOM3_IO2		PINMUX_PIN(PIN_PA2, 2, 1)
+#define PIN_PA2__A22			PINMUX_PIN(PIN_PA2, 3, 1)
+
+#define PIN_PA3				3
+#define PIN_PA3__GPIO			PINMUX_PIN(PIN_PA3, 0, 0)
+#define PIN_PA3__SDMMC0_DAT0		PINMUX_PIN(PIN_PA3, 1, 1)
+#define PIN_PA3__FLEXCOM3_IO3		PINMUX_PIN(PIN_PA3, 2, 1)
+#define PIN_PA3__D0			PINMUX_PIN(PIN_PA3, 3, 1)
+
+#define PIN_PA4				4
+#define PIN_PA4__GPIO			PINMUX_PIN(PIN_PA4, 0, 0)
+#define PIN_PA4__SDMMC0_DAT1		PINMUX_PIN(PIN_PA4, 1, 1)
+#define PIN_PA4__FLEXCOM3_IO4		PINMUX_PIN(PIN_PA4, 2, 1)
+#define PIN_PA4__D1			PINMUX_PIN(PIN_PA4, 3, 1)
+
+#define PIN_PA5				5
+#define PIN_PA5__GPIO			PINMUX_PIN(PIN_PA5, 0, 0)
+#define PIN_PA5__SDMMC0_DAT4		PINMUX_PIN(PIN_PA5, 1, 1)
+#define PIN_PA5__FLEXCOM2_IO0		PINMUX_PIN(PIN_PA5, 2, 3)
+#define PIN_PA5__D4			PINMUX_PIN(PIN_PA5, 3, 1)
+#define PIN_PA5__TCLK4			PINMUX_PIN(PIN_PA5, 6, 3)
+
+#define PIN_PA6				6
+#define PIN_PA6__GPIO			PINMUX_PIN(PIN_PA6, 0, 0)
+#define PIN_PA6__SDMMC0_DAT5		PINMUX_PIN(PIN_PA6, 1, 1)
+#define PIN_PA6__FLEXCOM2_IO1		PINMUX_PIN(PIN_PA6, 2, 3)
+#define PIN_PA6__D5			PINMUX_PIN(PIN_PA6, 3, 1)
+#define PIN_PA6__TIOB4			PINMUX_PIN(PIN_PA6, 6, 3)
+
+#define PIN_PA7				7
+#define PIN_PA7__GPIO			PINMUX_PIN(PIN_PA7, 0, 0)
+#define PIN_PA7__SDMMC0_DAT6		PINMUX_PIN(PIN_PA7, 1, 1)
+#define PIN_PA7__FLEXCOM2_IO2		PINMUX_PIN(PIN_PA7, 2, 3)
+#define PIN_PA7__D6			PINMUX_PIN(PIN_PA7, 3, 1)
+#define PIN_PA7__TIOA4			PINMUX_PIN(PIN_PA7, 6, 3)
+
+#define PIN_PA8				8
+#define PIN_PA8__GPIO			PINMUX_PIN(PIN_PA8, 0, 0)
+#define PIN_PA8__SDMMC0_DAT7		PINMUX_PIN(PIN_PA8, 1, 1)
+#define PIN_PA8__FLEXCOM2_IO3		PINMUX_PIN(PIN_PA8, 2, 3)
+#define PIN_PA8__D7			PINMUX_PIN(PIN_PA8, 3, 1)
+#define PIN_PA8__TIOA5			PINMUX_PIN(PIN_PA8, 6, 3)
+
+#define PIN_PA9				9
+#define PIN_PA9__GPIO			PINMUX_PIN(PIN_PA9, 0, 0)
+#define PIN_PA9__SDMMC0_DAT2		PINMUX_PIN(PIN_PA9, 1, 1)
+#define PIN_PA9__FLEXCOM0_IO2		PINMUX_PIN(PIN_PA9, 2, 1)
+#define PIN_PA9__D2			PINMUX_PIN(PIN_PA9, 3, 1)
+#define PIN_PA9__TIOB5			PINMUX_PIN(PIN_PA9, 6, 3)
+
+#define PIN_PA10			10
+#define PIN_PA10__GPIO			PINMUX_PIN(PIN_PA10, 0, 0)
+#define PIN_PA10__SDMMC0_DAT3		PINMUX_PIN(PIN_PA10, 1, 1)
+#define PIN_PA10__FLEXCOM0_IO3		PINMUX_PIN(PIN_PA10, 2, 1)
+#define PIN_PA10__D3			PINMUX_PIN(PIN_PA10, 3, 1)
+#define PIN_PA10__TCLK5			PINMUX_PIN(PIN_PA10, 6, 3)
+
+#define PIN_PA11			11
+#define PIN_PA11__GPIO			PINMUX_PIN(PIN_PA11, 0, 0)
+#define PIN_PA11__SDMMC0_DS		PINMUX_PIN(PIN_PA11, 1, 1)
+#define PIN_PA11__FLEXCOM0_IO4		PINMUX_PIN(PIN_PA11, 2, 1)
+#define PIN_PA11__NANDRDY		PINMUX_PIN(PIN_PA11, 3, 1)
+#define PIN_PA11__TIOB3			PINMUX_PIN(PIN_PA11, 6, 3)
+
+#define PIN_PA12			12
+#define PIN_PA12__GPIO			PINMUX_PIN(PIN_PA12, 0, 0)
+#define PIN_PA12__FLEXCOM0_IO0		PINMUX_PIN(PIN_PA12, 2, 1)
+#define PIN_PA12__NRD			PINMUX_PIN(PIN_PA12, 3, 1)
+#define PIN_PA12__PCK0			PINMUX_PIN(PIN_PA12, 4, 1)
+#define PIN_PA12__EXT_IRQ0		PINMUX_PIN(PIN_PA12, 5, 1)
+#define PIN_PA12__TIOA3			PINMUX_PIN(PIN_PA12, 6, 3)
+
+#define PIN_PA13			13
+#define PIN_PA13__GPIO			PINMUX_PIN(PIN_PA13, 0, 0)
+#define PIN_PA13__FLEXCOM0_IO1		PINMUX_PIN(PIN_PA13, 2, 1)
+#define PIN_PA13__NCS0			PINMUX_PIN(PIN_PA13, 3, 1)
+#define PIN_PA13__PCK1			PINMUX_PIN(PIN_PA13, 4, 1)
+#define PIN_PA13__TCLK3			PINMUX_PIN(PIN_PA13, 6, 3)
+
+#define PIN_PA14			14
+#define PIN_PA14__GPIO			PINMUX_PIN(PIN_PA14, 0, 0)
+#define PIN_PA14__FLEXCOM4_IO4		PINMUX_PIN(PIN_PA14, 1, 1)
+#define PIN_PA14__SDMMC0_WP		PINMUX_PIN(PIN_PA14, 2, 1)
+#define PIN_PA14__FLEXCOM3_IO0		PINMUX_PIN(PIN_PA14, 3, 4)
+
+#define PIN_PA15			15
+#define PIN_PA15__GPIO			PINMUX_PIN(PIN_PA15, 0, 0)
+#define PIN_PA15__FLEXCOM4_IO3		PINMUX_PIN(PIN_PA15, 1, 1)
+#define PIN_PA15__SDMMC0_1V8SEL		PINMUX_PIN(PIN_PA15, 2, 1)
+#define PIN_PA15__FLEXCOM3_IO1		PINMUX_PIN(PIN_PA15, 3, 4)
+
+#define PIN_PA16			16
+#define PIN_PA16__GPIO			PINMUX_PIN(PIN_PA16, 0, 0)
+#define PIN_PA16__FLEXCOM4_IO2		PINMUX_PIN(PIN_PA16, 1, 1)
+#define PIN_PA16__SDMMCo_CD		PINMUX_PIN(PIN_PA16, 2, 1)
+#define PIN_PA16__PCK2			PINMUX_PIN(PIN_PA16, 4, 1)
+#define PIN_PA16__EXT_IRQ1		PINMUX_PIN(PIN_PA16, 5, 1)
+
+#define PIN_PA17			17
+#define PIN_PA17__GPIO			PINMUX_PIN(PIN_PA17, 0, 0)
+#define PIN_PA17__FLEXCOM4_IO1		PINMUX_PIN(PIN_PA17, 1, 1)
+
+#define PIN_PA18			18
+#define PIN_PA18__GPIO			PINMUX_PIN(PIN_PA18, 0, 0)
+#define PIN_PA18__FLEXCOM4_IO0		PINMUX_PIN(PIN_PA18, 1, 1)
+
+#define PIN_PA19			19
+#define PIN_PA19__GPIO			PINMUX_PIN(PIN_PA19, 0, 0)
+#define PIN_PA19__TK0			PINMUX_PIN(PIN_PA19, 1, 1)
+#define PIN_PA19__FLEXCOM4_IO5		PINMUX_PIN(PIN_PA19, 3, 1)
+#define PIN_PA19__PWML0			PINMUX_PIN(PIN_PA19, 4, 3)
+
+#define PIN_PA20			20
+#define PIN_PA20__GPIO			PINMUX_PIN(PIN_PA20, 0, 0)
+#define PIN_PA20__TD0			PINMUX_PIN(PIN_PA20, 1, 1)
+#define PIN_PA20__FLEXCOM3_IO4		PINMUX_PIN(PIN_PA20, 2, 2)
+#define PIN_PA20__FLEXCOM4_IO6		PINMUX_PIN(PIN_PA20, 3, 1)
+#define PIN_PA20__PWMH0			PINMUX_PIN(PIN_PA20, 4, 3)
+
+#define PIN_PA21			21
+#define PIN_PA21__GPIO			PINMUX_PIN(PIN_PA21, 0, 0)
+#define PIN_PA21__TF0			PINMUX_PIN(PIN_PA21, 1, 1)
+#define PIN_PA21__FLEXCOM3_IO3		PINMUX_PIN(PIN_PA21, 2, 2)
+#define PIN_PA21__PWML1			PINMUX_PIN(PIN_PA21, 4, 3)
+
+#define PIN_PA22			22
+#define PIN_PA22__GPIO			PINMUX_PIN(PIN_PA22, 0, 0)
+#define PIN_PA22__RD0			PINMUX_PIN(PIN_PA22, 1, 1)
+#define PIN_PA22__FLEXCOM3_IO2		PINMUX_PIN(PIN_PA22, 2, 2)
+#define PIN_PA22__PDMC0_DS1		PINMUX_PIN(PIN_PA22, 3, 1)
+#define PIN_PA22__PWMH1			PINMUX_PIN(PIN_PA22, 4, 3)
+
+#define PIN_PA23			23
+#define PIN_PA23__GPIO			PINMUX_PIN(PIN_PA23, 0, 0)
+#define PIN_PA23__RK0			PINMUX_PIN(PIN_PA23, 1, 1)
+#define PIN_PA23__FLEXCOM3_IO1		PINMUX_PIN(PIN_PA23, 2, 2)
+#define PIN_PA23__PDMC0_CLK		PINMUX_PIN(PIN_PA23, 3, 1)
+#define PIN_PA23__PWML2			PINMUX_PIN(PIN_PA23, 4, 3)
+
+#define PIN_PA24			24
+#define PIN_PA24__GPIO			PINMUX_PIN(PIN_PA24, 0, 0)
+#define PIN_PA24__RF0			PINMUX_PIN(PIN_PA24, 1, 1)
+#define PIN_PA24__FLEXCOM3_IO0		PINMUX_PIN(PIN_PA24, 2, 2)
+#define PIN_PA24__PDMC0_DS0		PINMUX_PIN(PIN_PA24, 3, 1)
+#define PIN_PA24__PWMH2			PINMUX_PIN(PIN_PA24, 4, 3)
+
+#define PIN_PA25			25
+#define PIN_PA25__GPIO			PINMUX_PIN(PIN_PA25, 0, 0)
+#define PIN_PA25__G0_TXCTL		PINMUX_PIN(PIN_PA25, 1, 1)
+#define PIN_PA25__FLEXCOM6_IO2		PINMUX_PIN(PIN_PA25, 2, 1)
+
+#define PIN_PA26			26
+#define PIN_PA26__GPIO			PINMUX_PIN(PIN_PA26, 0, 0)
+#define PIN_PA26__G0_TX0		PINMUX_PIN(PIN_PA26, 1, 1)
+#define PIN_PA26__FLEXCOM6_IO3		PINMUX_PIN(PIN_PA26, 2, 1)
+
+#define PIN_PA27			27
+#define PIN_PA27__GPIO			PINMUX_PIN(PIN_PA27, 0, 0)
+#define PIN_PA27__G0_TX1		PINMUX_PIN(PIN_PA27, 1, 1)
+#define PIN_PA27__FLEXCOM6_IO4		PINMUX_PIN(PIN_PA27, 2, 1)
+
+#define PIN_PA28			28
+#define PIN_PA28__GPIO			PINMUX_PIN(PIN_PA28, 0, 0)
+#define PIN_PA28__G0_RXCTL		PINMUX_PIN(PIN_PA28, 1, 1)
+#define PIN_PA28__FLEXCOM6_IO0		PINMUX_PIN(PIN_PA28, 2, 1)
+
+#define PIN_PA29			29
+#define PIN_PA29__GPIO			PINMUX_PIN(PIN_PA29, 0, 0)
+#define PIN_PA29__G0_RX0		PINMUX_PIN(PIN_PA29, 1, 1)
+#define PIN_PA29__FLEXCOM6_IO1		PINMUX_PIN(PIN_PA29, 2, 1)
+
+#define PIN_PA30			30
+#define PIN_PA30__GPIO			PINMUX_PIN(PIN_PA30, 0, 0)
+#define PIN_PA30__G0_RX1		PINMUX_PIN(PIN_PA30, 1, 1)
+#define PIN_PA30__FLEXCOM8_IO0		PINMUX_PIN(PIN_PA30, 2, 1)
+
+#define PIN_PA31			31
+#define PIN_PA31__GPIO			PINMUX_PIN(PIN_PA31, 0, 0)
+#define PIN_PA31__G0_MDC		PINMUX_PIN(PIN_PA31, 1, 1)
+#define PIN_PA31__FLEXCOM8_IO1		PINMUX_PIN(PIN_PA31, 2, 1)
+
+#define PIN_PB0				32
+#define PIN_PB0__GPIO			PINMUX_PIN(PIN_PB0, 0, 0)
+#define PIN_PB0__G0_MDIO		PINMUX_PIN(PIN_PB0, 1, 1)
+#define PIN_PB0__FLEXCOM8_IO3		PINMUX_PIN(PIN_PB0, 2, 2)
+
+#define PIN_PB1				33
+#define PIN_PB1__GPIO			PINMUX_PIN(PIN_PB1, 0, 0)
+#define PIN_PB1__G0_REFCK		PINMUX_PIN(PIN_PB1, 1, 2)
+#define PIN_PB1__FLEXCOM8_IO2		PINMUX_PIN(PIN_PB1, 2, 1)
+
+#define PIN_PB2				34
+#define PIN_PB2__GPIO			PINMUX_PIN(PIN_PB2, 0, 0)
+#define PIN_PB2__G0_RX2			PINMUX_PIN(PIN_PB2, 1, 1)
+#define PIN_PB2__FLEXCOM8_IO4		PINMUX_PIN(PIN_PB2, 2, 1)
+#define PIN_PB2__G0_RXER		PINMUX_PIN(PIN_PB2, 3, 2)
+#define PIN_PB2__RK0			PINMUX_PIN(PIN_PB2, 4, 2)
+
+#define PIN_PB3				35
+#define PIN_PB3__GPIO			PINMUX_PIN(PIN_PB3, 0, 0)
+#define PIN_PB3__G0_RXCK		PINMUX_PIN(PIN_PB3, 1, 1)
+#define PIN_PB3__FLEXCOM10_IO2		PINMUX_PIN(PIN_PB3, 2, 2)
+#define PIN_PB3__TK0			PINMUX_PIN(PIN_PB3, 4, 2)
+
+#define PIN_PB4				36
+#define PIN_PB4__GPIO			PINMUX_PIN(PIN_PB4, 0, 0)
+#define PIN_PB4__G0_TX2			PINMUX_PIN(PIN_PB4, 1, 1)
+#define PIN_PB4__FLEXCOM10_IO3		PINMUX_PIN(PIN_PB4, 2, 2)
+#define PIN_PB4__TF0			PINMUX_PIN(PIN_PB4, 4, 2)
+
+#define PIN_PB5				37
+#define PIN_PB5__GPIO			PINMUX_PIN(PIN_PB5, 0, 0)
+#define PIN_PB5__G0_TX3			PINMUX_PIN(PIN_PB5, 1, 1)
+#define PIN_PB5__FLEXCOM10_IO4		PINMUX_PIN(PIN_PB5, 2, 1)
+#define PIN_PB5__TD0			PINMUX_PIN(PIN_PB5, 4, 2)
+
+#define PIN_PB6				38
+#define PIN_PB6__GPIO			PINMUX_PIN(PIN_PB6, 0, 0)
+#define PIN_PB6__G0_RX3			PINMUX_PIN(PIN_PB6, 1, 1)
+#define PIN_PB6__FLEXCOM10_IO0		PINMUX_PIN(PIN_PB6, 2, 2)
+#define PIN_PB6__RD0			PINMUX_PIN(PIN_PB6, 4, 2)
+
+#define PIN_PB7				39
+#define PIN_PB7__GPIO			PINMUX_PIN(PIN_PB7, 0, 0)
+#define PIN_PB7__G0_TSUCOMP		PINMUX_PIN(PIN_PB7, 1, 1)
+#define PIN_PB7__FLEXCOM10_IO1		PINMUX_PIN(PIN_PB7, 2, 2)
+#define PIN_PB7__ADTRG			PINMUX_PIN(PIN_PB7, 3, 1)
+#define PIN_PB7__RF0			PINMUX_PIN(PIN_PB7, 4, 2)
+
+#define PIN_PB8				40
+#define PIN_PB8__GPIO			PINMUX_PIN(PIN_PB8, 0, 0)
+#define PIN_PB8__QSPI0_IO3		PINMUX_PIN(PIN_PB8, 1, 1)
+#define PIN_PB8__PCK3			PINMUX_PIN(PIN_PB8, 2, 1)
+#define PIN_PB8__FLEXCOM2_IO1		PINMUX_PIN(PIN_PB8, 4, 2)
+
+#define PIN_PB9				41
+#define PIN_PB9__GPIO			PINMUX_PIN(PIN_PB9, 0, 0)
+#define PIN_PB9__QSPI0_IO2		PINMUX_PIN(PIN_PB9, 1, 1)
+#define PIN_PB9__FLEXCOM2_IO0		PINMUX_PIN(PIN_PB9, 4, 2)
+#define PIN_PB9__PWMEXTRG0		PINMUX_PIN(PIN_PB9, 5, 1)
+
+#define PIN_PB10			42
+#define PIN_PB10__GPIO			PINMUX_PIN(PIN_PB10, 0, 0)
+#define PIN_PB10__QSPI0_IO1		PINMUX_PIN(PIN_PB10, 1, 1)
+#define PIN_PB10__FLEXCOM2_IO4		PINMUX_PIN(PIN_PB10, 4, 2)
+#define PIN_PB10__PWMEXTRG1		PINMUX_PIN(PIN_PB10, 5, 1)
+
+#define PIN_PB11			43
+#define PIN_PB11__GPIO			PINMUX_PIN(PIN_PB11, 0, 0)
+#define PIN_PB11__QSPI0_IO0		PINMUX_PIN(PIN_PB11, 1, 1)
+#define PIN_PB11__FLEXCOM2_IO5		PINMUX_PIN(PIN_PB11, 4, 2)
+#define PIN_PB11__PWML3			PINMUX_PIN(PIN_PB11, 5, 1)
+#define PIN_PB11__TIOB3			PINMUX_PIN(PIN_PB11, 6, 2)
+
+#define PIN_PB12			44
+#define PIN_PB12__GPIO			PINMUX_PIN(PIN_PB12, 0, 0)
+#define PIN_PB12__QSPI0_CS		PINMUX_PIN(PIN_PB12, 1, 1)
+#define PIN_PB12__FLEXCOM2_IO3		PINMUX_PIN(PIN_PB12, 4, 2)
+#define PIN_PB12__PWMFI1		PINMUX_PIN(PIN_PB12, 6, 1)
+#define PIN_PB12__TIOA3			PINMUX_PIN(PIN_PB12, 6, 2)
+
+#define PIN_PB13			45
+#define PIN_PB13__GPIO			PINMUX_PIN(PIN_PB13, 0, 0)
+#define PIN_PB13__QSPI0_SCK		PINMUX_PIN(PIN_PB13, 1, 1)
+#define PIN_PB13__FLEXCOM2_IO2		PINMUX_PIN(PIN_PB13, 4, 2)
+#define PIN_PB13__PWMFI0		PINMUX_PIN(PIN_PB13, 5, 1)
+#define PIN_PB13__TCLK3			PINMUX_PIN(PIN_PB13, 6, 2)
+
+#define PIN_PB14			46
+#define PIN_PB14__GPIO			PINMUX_PIN(PIN_PB14, 0, 0)
+#define PIN_PB14__QSPI0_SCKN		PINMUX_PIN(PIN_PB14, 1, 1)
+#define PIN_PB14__QSPI1_SCK		PINMUX_PIN(PIN_PB14, 2, 1)
+#define PIN_PB14__I2SMCC0_CK		PINMUX_PIN(PIN_PB14, 3, 3)
+#define PIN_PB14__FLEXCOM10_IO5		PINMUX_PIN(PIN_PB14, 4, 1)
+#define PIN_PB14__PWMH3			PINMUX_PIN(PIN_PB14, 5, 1)
+#define PIN_PB14__FLEXCOM2_IO1		PINMUX_PIN(PIN_PB14, 7, 4)
+
+#define PIN_PB15			47
+#define PIN_PB15__GPIO			PINMUX_PIN(PIN_PB15, 0, 0)
+#define PIN_PB15__QSPI0_IO4		PINMUX_PIN(PIN_PB15, 1, 1)
+#define PIN_PB15__QSPI1_IO0		PINMUX_PIN(PIN_PB15, 2, 1)
+#define PIN_PB15__I2SMCC0_WS		PINMUX_PIN(PIN_PB15, 3, 3)
+#define PIN_PB15__FLEXCOM10_IO6		PINMUX_PIN(PIN_PB15, 4, 1)
+#define PIN_PB15__PWML0			PINMUX_PIN(PIN_PB15, 5, 1)
+#define PIN_PB15__TCLK4			PINMUX_PIN(PIN_PB15, 6, 2)
+#define PIN_PB15__FLEXCOM2_IO0		PINMUX_PIN(PIN_PB15, 7, 4)
+
+#define PIN_PB16			48
+#define PIN_PB16__GPIO			PINMUX_PIN(PIN_PB16, 0, 0)
+#define PIN_PB16__QSPI0_IO5		PINMUX_PIN(PIN_PB16, 1, 1)
+#define PIN_PB16__QSPI1_IO1		PINMUX_PIN(PIN_PB16, 2, 1)
+#define PIN_PB16__I2SMCC0_DIN0		PINMUX_PIN(PIN_PB16, 3, 3)
+#define PIN_PB16__FLEXCOM10_IO4		PINMUX_PIN(PIN_PB16, 4, 1)
+#define PIN_PB16__PWMH0			PINMUX_PIN(PIN_PB16, 5, 1)
+#define PIN_PB16__TIOB4			PINMUX_PIN(PIN_PB16, 6, 2)
+
+#define PIN_PB17			49
+#define PIN_PB17__GPIO			PINMUX_PIN(PIN_PB17, 0, 0)
+#define PIN_PB17__QSPI0_IO6		PINMUX_PIN(PIN_PB17, 1, 1)
+#define PIN_PB17__QSPI1_IO2		PINMUX_PIN(PIN_PB17, 2, 1)
+#define PIN_PB17__I2SMCC0_DOUT0		PINMUX_PIN(PIN_PB17, 3, 3)
+#define PIN_PB17__FLEXCOM10_IO3		PINMUX_PIN(PIN_PB17, 4, 1)
+#define PIN_PB17__PWML1			PINMUX_PIN(PIN_PB17, 5, 1)
+#define PIN_PB17__TIOA4			PINMUX_PIN(PIN_PB17, 6, 2)
+
+#define PIN_PB18			50
+#define PIN_PB18__GPIO			PINMUX_PIN(PIN_PB18, 0, 0)
+#define PIN_PB18__QSPI0_IO7		PINMUX_PIN(PIN_PB18, 1, 1)
+#define PIN_PB18__QSPI1_IO3		PINMUX_PIN(PIN_PB18, 2, 1)
+#define PIN_PB18__I2SMCC0_MCK		PINMUX_PIN(PIN_PB18, 3, 3)
+#define PIN_PB18__FLEXCOM10_IO2		PINMUX_PIN(PIN_PB18, 4, 1)
+#define PIN_PB18__PWMH1			PINMUX_PIN(PIN_PB18, 5, 1)
+#define PIN_PB18__TIOA5			PINMUX_PIN(PIN_PB18, 6, 2)
+
+#define PIN_PB19			51
+#define PIN_PB19__GPIO			PINMUX_PIN(PIN_PB19, 0, 0)
+#define PIN_PB19__QSPI0_DQS		PINMUX_PIN(PIN_PB19, 1, 1)
+#define PIN_PB19__EXT_IRQ1		PINMUX_PIN(PIN_PB19, 2, 2)
+#define PIN_PB19__PCK4			PINMUX_PIN(PIN_PB19, 3, 1)
+#define PIN_PB19__FLEXCOM10_IO1		PINMUX_PIN(PIN_PB19, 4, 1)
+#define PIN_PB19__PWML2			PINMUX_PIN(PIN_PB19, 5, 1)
+#define PIN_PB19__TIOB5			PINMUX_PIN(PIN_PB19, 6, 2)
+
+#define PIN_PB20			52
+#define PIN_PB20__GPIO			PINMUX_PIN(PIN_PB20, 0, 0)
+#define PIN_PB20__QSPI0_INT		PINMUX_PIN(PIN_PB20, 1, 1)
+#define PIN_PB20__QSPI1_CS		PINMUX_PIN(PIN_PB20, 2, 1)
+#define PIN_PB20__FLEXCOM10_IO0		PINMUX_PIN(PIN_PB20, 4, 1)
+#define PIN_PB20__PWMH2			PINMUX_PIN(PIN_PB20, 5, 1)
+#define PIN_PB20__TCLK5			PINMUX_PIN(PIN_PB20, 6, 2)
+
+#define PIN_PB21			53
+#define PIN_PB21__GPIO			PINMUX_PIN(PIN_PB21, 0, 0)
+#define PIN_PB21__SDMMC1_RSTN		PINMUX_PIN(PIN_PB21, 1, 1)
+#define PIN_PB21__FLEXCOM6_IO4		PINMUX_PIN(PIN_PB21, 2, 2)
+#define PIN_PB21__TIOB2			PINMUX_PIN(PIN_PB21, 3, 2)
+#define PIN_PB21__ADTRG			PINMUX_PIN(PIN_PB21, 4, 2)
+#define PIN_PB21__EXT_IRQ0		PINMUX_PIN(PIN_PB21, 5, 2)
+
+#define PIN_PB22			54
+#define PIN_PB22__GPIO			PINMUX_PIN(PIN_PB22, 0, 0)
+#define PIN_PB22__SDMMC1_CMD		PINMUX_PIN(PIN_PB22, 1, 1)
+#define PIN_PB22__FLEXCOM6_IO3		PINMUX_PIN(PIN_PB22, 2, 2)
+#define PIN_PB22__TCLK2			PINMUX_PIN(PIN_PB22, 3, 2)
+
+#define PIN_PB23			55
+#define PIN_PB23__GPIO			PINMUX_PIN(PIN_PB23, 0, 0)
+#define PIN_PB23__SDMMC1_CK		PINMUX_PIN(PIN_PB23, 1, 1)
+#define PIN_PB23__FLEXCOM6_IO2		PINMUX_PIN(PIN_PB23, 2, 2)
+#define PIN_PB23__TIOA2			PINMUX_PIN(PIN_PB23, 3, 2)
+
+#define PIN_PB24			56
+#define PIN_PB24__GPIO			PINMUX_PIN(PIN_PB24, 0, 0)
+#define PIN_PB24__SDMMC1_DAT0		PINMUX_PIN(PIN_PB24, 1, 1)
+#define PIN_PB24__FLEXCOM6_IO0		PINMUX_PIN(PIN_PB24, 2, 2)
+
+#define PIN_PB25			57
+#define PIN_PB25__GPIO			PINMUX_PIN(PIN_PB25, 0, 0)
+#define PIN_PB25__SDMMC1_DAT1		PINMUX_PIN(PIN_PB25, 1, 1)
+#define PIN_PB25__FLEXCOM6_IO1		PINMUX_PIN(PIN_PB25, 2, 2)
+#define PIN_PB25__TIOB2			PINMUX_PIN(PIN_PB25, 3, 1)
+
+#define PIN_PB26			58
+#define PIN_PB26__GPIO			PINMUX_PIN(PIN_PB26, 0, 0)
+#define PIN_PB26__SDMMC1_DAT2		PINMUX_PIN(PIN_PB26, 1, 1)
+#define PIN_PB26__FLEXCOM8_IO0		PINMUX_PIN(PIN_PB26, 2, 3)
+#define PIN_PB26__TCLK2			PINMUX_PIN(PIN_PB26, 3, 1)
+
+#define PIN_PB27			59
+#define PIN_PB27__GPIO			PINMUX_PIN(PIN_PB27, 0, 0)
+#define PIN_PB27__SDMMC1_DAT3		PINMUX_PIN(PIN_PB27, 1, 1)
+#define PIN_PB27__FLEXCOM8_IO1		PINMUX_PIN(PIN_PB27, 2, 3)
+#define PIN_PB27__TIOA2			PINMUX_PIN(PIN_PB27, 3, 1)
+
+#define PIN_PB28			60
+#define PIN_PB28__GPIO			PINMUX_PIN(PIN_PB28, 0, 0)
+#define PIN_PB28__SDMMC1_WP		PINMUX_PIN(PIN_PB28, 1, 1)
+#define PIN_PB28__FLEXCOM1_IO0		PINMUX_PIN(PIN_PB28, 3, 3)
+#define PIN_PB28__D15			PINMUX_PIN(PIN_PB28, 5, 1)
+
+#define PIN_PB29			61
+#define PIN_PB29__GPIO			PINMUX_PIN(PIN_PB29, 0, 0)
+#define PIN_PB29__SDMMC1_CD		PINMUX_PIN(PIN_PB29, 1, 1)
+#define PIN_PB29__I2SMCC0_MCK		PINMUX_PIN(PIN_PB29, 2, 1)
+#define PIN_PB29__FLEXCOM1_IO1		PINMUX_PIN(PIN_PB29, 3, 3)
+#define PIN_PB29__D14			PINMUX_PIN(PIN_PB29, 5, 2)
+
+#define PIN_PB30			62
+#define PIN_PB30__GPIO			PINMUX_PIN(PIN_PB30, 0, 0)
+#define PIN_PB30__SDMMC1_1V8SEL		PINMUX_PIN(PIN_PB30, 1, 1)
+#define PIN_PB30__I2SMCC1_MCK		PINMUX_PIN(PIN_PB30, 2, 2)
+#define PIN_PB30__FLEXCOM1_IO2		PINMUX_PIN(PIN_PB30, 3, 3)
+#define PIN_PB30__TIOA1			PINMUX_PIN(PIN_PB30, 4, 1)
+#define PIN_PB30__NCS1			PINMUX_PIN(PIN_PB30, 5, 1)
+
+#define PIN_PB31			63
+#define PIN_PB31__GPIO			PINMUX_PIN(PIN_PB31, 0, 0)
+#define PIN_PB31__PCK7			PINMUX_PIN(PIN_PB31, 1, 2)
+#define PIN_PB31__I2SMCC1_DIN1		PINMUX_PIN(PIN_PB31, 2, 1)
+#define PIN_PB31__FLEXCOM1_IO3		PINMUX_PIN(PIN_PB31, 3, 3)
+#define PIN_PB31__TCLK1			PINMUX_PIN(PIN_PB31, 4, 1)
+#define PIN_PB31__NWE			PINMUX_PIN(PIN_PB31, 5, 2)
+
+#define PIN_PC0				64
+#define PIN_PC0__GPIO			PINMUX_PIN(PIN_PC0, 0, 0)
+#define PIN_PC0__PCK6			PINMUX_PIN(PIN_PC0, 1, 2)
+#define PIN_PC0__I2SMCC1_DIN2		PINMUX_PIN(PIN_PC0, 2, 1)
+#define PIN_PC0__FLEXCOM9_IO4		PINMUX_PIN(PIN_PC0, 3, 2)
+#define PIN_PC0__TIOB1			PINMUX_PIN(PIN_PC0, 4, 1)
+#define PIN_PC0__NWR1			PINMUX_PIN(PIN_PC0, 5, 1)
+
+#define PIN_PC1				65
+#define PIN_PC1__GPIO			PINMUX_PIN(PIN_PC1, 0, 0)
+#define PIN_PC1__PCK5			PINMUX_PIN(PIN_PC1, 1, 1)
+#define PIN_PC1__FLEXCOM9_IO2		PINMUX_PIN(PIN_PC1, 3, 2)
+#define PIN_PC1__SMCK			PINMUX_PIN(PIN_PC1, 5, 1)
+
+#define PIN_PC2				66
+#define PIN_PC2__GPIO			PINMUX_PIN(PIN_PC2, 0, 0)
+#define PIN_PC2__EXT_IRQ0		PINMUX_PIN(PIN_PC2, 1, 3)
+#define PIN_PC2__FLEXCOM9_IO3		PINMUX_PIN(PIN_PC2, 3, 2)
+#define PIN_PC2__A11			PINMUX_PIN(PIN_PC2, 5, 1)
+
+#define PIN_PC3				67
+#define PIN_PC3__GPIO			PINMUX_PIN(PIN_PC3, 0, 0)
+#define PIN_PC3__SPDIF_RX		PINMUX_PIN(PIN_PC3, 1, 2)
+#define PIN_PC3__FLEXCOM9_IO0		PINMUX_PIN(PIN_PC3, 3, 2)
+#define PIN_PC3__FLEXCOM0_IO4		PINMUX_PIN(PIN_PC3, 4, 2)
+#define PIN_PC3__A10			PINMUX_PIN(PIN_PC3, 5, 1)
+
+#define PIN_PC4				68
+#define PIN_PC4__GPIO			PINMUX_PIN(PIN_PC4, 0, 0)
+#define PIN_PC4__SPDIF_TX		PINMUX_PIN(PIN_PC4, 1, 2)
+#define PIN_PC4__FLEXCOM9_IO1		PINMUX_PIN(PIN_PC4, 3, 2)
+#define PIN_PC4__FLEXCOM0_IO3		PINMUX_PIN(PIN_PC4, 4, 2)
+#define PIN_PC4__D0			PINMUX_PIN(PIN_PC4, 5, 2)
+
+#define PIN_PC5				69
+#define PIN_PC5__GPIO			PINMUX_PIN(PIN_PC5, 0, 0)
+#define PIN_PC5__I3CC_SDASPUE		PINMUX_PIN(PIN_PC5, 1, 1)
+#define PIN_PC5__I2SMCC1_DIN3		PINMUX_PIN(PIN_PC5, 2, 1)
+#define PIN_PC5__FLEXCOM0_IO2		PINMUX_PIN(PIN_PC5, 4, 2)
+#define PIN_PC5__D1			PINMUX_PIN(PIN_PC5, 5, 2)
+
+#define PIN_PC6				70
+#define PIN_PC6__GPIO			PINMUX_PIN(PIN_PC6, 0, 0)
+#define PIN_PC6__I3CC_SCL		PINMUX_PIN(PIN_PC6, 1, 1)
+#define PIN_PC6__FLEXCOM0_IO1		PINMUX_PIN(PIN_PC6, 4, 2)
+#define PIN_PC6__D4			PINMUX_PIN(PIN_PC6, 5, 2)
+
+#define PIN_PC7				71
+#define PIN_PC7__GPIO			PINMUX_PIN(PIN_PC7, 0, 0)
+#define PIN_PC7__I3CC_SDA		PINMUX_PIN(PIN_PC7, 1, 1)
+#define PIN_PC7__FLEXCOM0_IO0		PINMUX_PIN(PIN_PC7, 4, 2)
+#define PIN_PC7__D5			PINMUX_PIN(PIN_PC7, 5, 2)
+
+#define PIN_PC8				72
+#define PIN_PC8__GPIO			PINMUX_PIN(PIN_PC8, 0, 0)
+#define PIN_PC8__I2SMCC0_DIN1		PINMUX_PIN(PIN_PC8, 1, 1)
+#define PIN_PC8__PDMC0_DS1		PINMUX_PIN(PIN_PC8, 2, 2)
+#define PIN_PC8__I2SMCC1_DOUT1		PINMUX_PIN(PIN_PC8, 3, 1)
+#define PIN_PC8__FLEXCOM9_IO0		PINMUX_PIN(PIN_PC8, 4, 1)
+#define PIN_PC8__D6			PINMUX_PIN(PIN_PC8, 5, 2)
+
+#define PIN_PC9				73
+#define PIN_PC9__GPIO			PINMUX_PIN(PIN_PC9, 0, 0)
+#define PIN_PC9__I2SMCC0_DIN2		PINMUX_PIN(PIN_PC9, 1, 1)
+#define PIN_PC9__PDMC0_CLK		PINMUX_PIN(PIN_PC9, 2, 2)
+#define PIN_PC9__I2SMCC1_DOUT2		PINMUX_PIN(PIN_PC9, 3, 1)
+#define PIN_PC9__FLEXCOM9_IO1		PINMUX_PIN(PIN_PC9, 4, 1)
+#define PIN_PC9__D7			PINMUX_PIN(PIN_PC9, 5, 2)
+
+#define PIN_PC10			74
+#define PIN_PC10__GPIO			PINMUX_PIN(PIN_PC10, 0, 0)
+#define PIN_PC10__I2SMCC0_DIN3		PINMUX_PIN(PIN_PC10, 1, 1)
+#define PIN_PC10__PDMC0_DS0		PINMUX_PIN(PIN_PC10, 2, 2)
+#define PIN_PC10__I2SMCC1_DOUT3		PINMUX_PIN(PIN_PC10, 3, 1)
+#define PIN_PC10__FLEXCOM9_IO2		PINMUX_PIN(PIN_PC10, 4, 1)
+#define PIN_PC10__D2			PINMUX_PIN(PIN_PC10, 5, 2)
+
+#define PIN_PC11			75
+#define PIN_PC11__GPIO			PINMUX_PIN(PIN_PC11, 0, 0)
+#define PIN_PC11__I2SMCC0_DOUT1		PINMUX_PIN(PIN_PC11, 1, 1)
+#define PIN_PC11__PDMC1_DS0		PINMUX_PIN(PIN_PC11, 2, 1)
+#define PIN_PC11__FLEXCOM9_IO3		PINMUX_PIN(PIN_PC11, 4, 1)
+#define PIN_PC10__D3			PINMUX_PIN(PIN_PC10, 5, 2)
+
+#define PIN_PC12			76
+#define PIN_PC12__GPIO			PINMUX_PIN(PIN_PC12, 0, 0)
+#define PIN_PC12__I2SMCC0_DOUT2		PINMUX_PIN(PIN_PC12, 1, 1)
+#define PIN_PC12__PDMC1_CLK		PINMUX_PIN(PIN_PC12, 2, 1)
+#define PIN_PC12__FLEXCOM9_IO4		PINMUX_PIN(PIN_PC12, 4, 1)
+#define PIN_PC12__A9			PINMUX_PIN(PIN_PC12, 5, 1)
+
+#define PIN_PC13			77
+#define PIN_PC13__GPIO			PINMUX_PIN(PIN_PC13, 0, 0)
+#define PIN_PC13__I2SMCC0_DOUT3		PINMUX_PIN(PIN_PC13, 1, 1)
+#define PIN_PC13__PDMC1_DS1		PINMUX_PIN(PIN_PC13, 2, 1)
+#define PIN_PC13__A8			PINMUX_PIN(PIN_PC13, 5, 1)
+
+#define PIN_PC14			78
+#define PIN_PC14__GPIO			PINMUX_PIN(PIN_PC14, 0, 0)
+#define PIN_PC14__I2SMCC1_DIN0		PINMUX_PIN(PIN_PC14, 1, 1)
+#define PIN_PC14__SPDIF_RX		PINMUX_PIN(PIN_PC14, 2, 3)
+#define PIN_PC14__FLEXCOM1_IO0		PINMUX_PIN(PIN_PC14, 3, 2)
+#define PIN_PC14__A7			PINMUX_PIN(PIN_PC14, 5, 1)
+
+#define PIN_PC15			79
+#define PIN_PC15__GPIO			PINMUX_PIN(PIN_PC15, 0, 0)
+#define PIN_PC15__I2SMCC1_WS		PINMUX_PIN(PIN_PC15, 1, 1)
+#define PIN_PC15__PDMC1_DS1		PINMUX_PIN(PIN_PC15, 2, 2)
+#define PIN_PC15__FLEXCOM1_IO1		PINMUX_PIN(PIN_PC15, 3, 2)
+#define PIN_PC15__A6			PINMUX_PIN(PIN_PC15, 5, 1)
+
+#define PIN_PC16			80
+#define PIN_PC16__GPIO			PINMUX_PIN(PIN_PC16, 0, 0)
+#define PIN_PC16__I2SMCC1_CK		PINMUX_PIN(PIN_PC16, 1, 1)
+#define PIN_PC16__PDMC1_CLK		PINMUX_PIN(PIN_PC16, 2, 2)
+#define PIN_PC16__FLEXCOM1_IO2		PINMUX_PIN(PIN_PC16, 3, 2)
+#define PIN_PC16__TIOA1			PINMUX_PIN(PIN_PC16, 4, 2)
+#define PIN_PC16__A5			PINMUX_PIN(PIN_PC16, 5, 1)
+
+#define PIN_PC17			81
+#define PIN_PC17__GPIO			PINMUX_PIN(PIN_PC17, 0, 0)
+#define PIN_PC17__I2SMCC1_DOUT0		PINMUX_PIN(PIN_PC17, 1, 1)
+#define PIN_PC17__PDMC1_DS0		PINMUX_PIN(PIN_PC17, 2, 2)
+#define PIN_PC17__FLEXCOM1_IO3		PINMUX_PIN(PIN_PC17, 3, 2)
+#define PIN_PC17__TCLK1			PINMUX_PIN(PIN_PC17, 4, 2)
+#define PIN_PC17__A4			PINMUX_PIN(PIN_PC17, 5, 1)
+
+#define PIN_PC18			82
+#define PIN_PC18__GPIO			PINMUX_PIN(PIN_PC18, 0, 0)
+#define PIN_PC18__I2SMCC0_DIN0		PINMUX_PIN(PIN_PC18, 1, 1)
+#define PIN_PC18__SPDIF_TX		PINMUX_PIN(PIN_PC18, 2, 3)
+#define PIN_PC18__FLEXCOM1_IO4		PINMUX_PIN(PIN_PC18, 3, 2)
+#define PIN_PC18__TIOB1			PINMUX_PIN(PIN_PC18, 4, 2)
+#define PIN_PC18__A3			PINMUX_PIN(PIN_PC18, 5, 1)
+
+#define PIN_PC19			83
+#define PIN_PC19__GPIO			PINMUX_PIN(PIN_PC19, 0, 0)
+#define PIN_PC19__I2SMCC0_WS		PINMUX_PIN(PIN_PC19, 1, 1)
+#define PIN_PC19__PCK6			PINMUX_PIN(PIN_PC19, 2, 1)
+#define PIN_PC19__A2			PINMUX_PIN(PIN_PC19, 5, 1)
+
+#define PIN_PC20			84
+#define PIN_PC20__GPIO			PINMUX_PIN(PIN_PC20, 0, 0)
+#define PIN_PC20__I2SMCC0_DOUT0		PINMUX_PIN(PIN_PC20, 1, 1)
+#define PIN_PC20__A1			PINMUX_PIN(PIN_PC20, 5, 1)
+
+#define PIN_PC21			85
+#define PIN_PC21__GPIO			PINMUX_PIN(PIN_PC21, 0, 0)
+#define PIN_PC21__I2SMCC0_CK		PINMUX_PIN(PIN_PC21, 1, 1)
+#define PIN_PC21__PCK7			PINMUX_PIN(PIN_PC21, 2, 1)
+#define PIN_PC21__A0			PINMUX_PIN(PIN_PC21, 5, 1)
+
+#define PIN_PC22			86
+#define PIN_PC22__GPIO			PINMUX_PIN(PIN_PC22, 0, 0)
+#define PIN_PC22__NTRST			PINMUX_PIN(PIN_PC22, 1, 1)
+#define PIN_PC22__NWAIT			PINMUX_PIN(PIN_PC22, 5, 1)
+
+#define PIN_PC23			87
+#define PIN_PC23__GPIO			PINMUX_PIN(PIN_PC23, 0, 0)
+#define PIN_PC23__TCK_SWCLK		PINMUX_PIN(PIN_PC23, 1, 1)
+
+#define PIN_PC24			88
+#define PIN_PC24__GPIO			PINMUX_PIN(PIN_PC24, 0, 0)
+#define PIN_PC24__TMS_SWDIO		PINMUX_PIN(PIN_PC24, 1, 1)
+
+#define PIN_PC25			89
+#define PIN_PC25__GPIO			PINMUX_PIN(PIN_PC25, 0, 0)
+#define PIN_PC25__TDI			PINMUX_PIN(PIN_PC25, 1, 1)
+
+#define PIN_PC26			90
+#define PIN_PC26__GPIO			PINMUX_PIN(PIN_PC26, 0, 0)
+#define PIN_PC26__TDO			PINMUX_PIN(PIN_PC26, 1, 1)
+#define PIN_PC26__A15			PINMUX_PIN(PIN_PC26, 5, 1)
+
+#define PIN_PC27			91
+#define PIN_PC27__GPIO			PINMUX_PIN(PIN_PC27, 0, 0)
+#define PIN_PC27__SDMMC2_CMD		PINMUX_PIN(PIN_PC27, 1, 1)
+#define PIN_PC27__FLEXCOM8_IO0		PINMUX_PIN(PIN_PC27, 2, 2)
+#define PIN_PC27__TD1			PINMUX_PIN(PIN_PC27, 4, 2)
+#define PIN_PC27__D8			PINMUX_PIN(PIN_PC27, 5, 1)
+
+#define PIN_PC28			92
+#define PIN_PC28__GPIO			PINMUX_PIN(PIN_PC28, 0, 0)
+#define PIN_PC28__SDMMC2_CK		PINMUX_PIN(PIN_PC28, 1, 1)
+#define PIN_PC28__FLEXCOM8_IO1		PINMUX_PIN(PIN_PC28, 2, 2)
+#define PIN_PC28__TF1			PINMUX_PIN(PIN_PC28, 4, 2)
+#define PIN_PC28__D9			PINMUX_PIN(PIN_PC28, 5, 1)
+
+#define PIN_PC29			93
+#define PIN_PC29__GPIO			PINMUX_PIN(PIN_PC29, 0, 0)
+#define PIN_PC29__SDMMC2_DAT0		PINMUX_PIN(PIN_PC29, 1, 1)
+#define PIN_PC29__FLEXCOM8_IO2		PINMUX_PIN(PIN_PC29, 2, 2)
+#define PIN_PC29__TK1			PINMUX_PIN(PIN_PC29, 4, 2)
+#define PIN_PC29__D10			PINMUX_PIN(PIN_PC29, 5, 1)
+#define PIN_PC29__TCLK0			PINMUX_PIN(PIN_PC29, 6, 1)
+
+#define PIN_PC30			94
+#define PIN_PC30__GPIO			PINMUX_PIN(PIN_PC30, 0, 0)
+#define PIN_PC30__SDMMC2_DAT1		PINMUX_PIN(PIN_PC30, 1, 1)
+#define PIN_PC30__FLEXCOM8_IO3		PINMUX_PIN(PIN_PC30, 2, 2)
+#define PIN_PC30__RD1			PINMUX_PIN(PIN_PC30, 4, 2)
+#define PIN_PC30__D11			PINMUX_PIN(PIN_PC30, 5, 1)
+#define PIN_PC30__TIOA0			PINMUX_PIN(PIN_PC30, 6, 1)
+
+#define PIN_PC31			95
+#define PIN_PC31__GPIO			PINMUX_PIN(PIN_PC31, 0, 0)
+#define PIN_PC31__SDMMC2_DAT2		PINMUX_PIN(PIN_PC31, 1, 1)
+#define PIN_PC31__FLEXCOM8_IO4		PINMUX_PIN(PIN_PC31, 2, 2)
+#define PIN_PC31__PCK0			PINMUX_PIN(PIN_PC31, 3, 2)
+#define PIN_PC31__RK1			PINMUX_PIN(PIN_PC31, 4, 2)
+#define PIN_PC31__D12			PINMUX_PIN(PIN_PC31, 5, 1)
+#define PIN_PC31__TIOB0			PINMUX_PIN(PIN_PC31, 6, 1)
+
+#define PIN_PD0				96
+#define PIN_PD0__GPIO			PINMUX_PIN(PIN_PD0, 0, 0)
+#define PIN_PD0__SDMMC2_DAT3		PINMUX_PIN(PIN_PD0, 1, 1)
+#define PIN_PD0__PCK1			PINMUX_PIN(PIN_PD0, 3, 2)
+#define PIN_PD0__RF1			PINMUX_PIN(PIN_PD0, 4, 2)
+#define PIN_PD0__D13			PINMUX_PIN(PIN_PD0, 5, 1)
+
+#define PIN_PD1				97
+#define PIN_PD1__GPIO			PINMUX_PIN(PIN_PD1, 0, 0)
+#define PIN_PD1__SDMMC2_WP		PINMUX_PIN(PIN_PD1, 1, 1)
+#define PIN_PD1__FLEXCOM1_IO5		PINMUX_PIN(PIN_PD1, 2, 1)
+#define PIN_PD1__LCDC_HSYNC		PINMUX_PIN(PIN_PD1, 3, 2)
+#define PIN_PD1__FLEXCOM3_IO0		PINMUX_PIN(PIN_PD1, 4, 3)
+
+#define PIN_PD2				98
+#define PIN_PD2__GPIO			PINMUX_PIN(PIN_PD2, 0, 0)
+#define PIN_PD2__SDMMC2_CD		PINMUX_PIN(PIN_PD2, 1, 1)
+#define PIN_PD2__FLEXCOM1_IO6		PINMUX_PIN(PIN_PD2, 2, 1)
+#define PIN_PD2__LCDC_VSYNC		PINMUX_PIN(PIN_PD2, 3, 2)
+#define PIN_PD2__FLEXCOM3_IO1		PINMUX_PIN(PIN_PD2, 4, 3)
+
+#define PIN_PD3				99
+#define PIN_PD3__GPIO			PINMUX_PIN(PIN_PD3, 0, 0)
+#define PIN_PD3__SDMMC2_1V8SEL		PINMUX_PIN(PIN_PD3, 1, 1)
+#define PIN_PD3__FLEXCOM1_IO4		PINMUX_PIN(PIN_PD3, 2, 1)
+#define PIN_PD3__TIOA0			PINMUX_PIN(PIN_PD3, 3, 2)
+#define PIN_PD3__FLEXCOM3_IO2		PINMUX_PIN(PIN_PD3, 4, 3)
+#define PIN_PD3__EXT_IRQ1		PINMUX_PIN(PIN_PD3, 5, 3)
+
+#define PIN_PD4				100
+#define PIN_PD4__GPIO			PINMUX_PIN(PIN_PD4, 0, 0)
+#define PIN_PD4__LCDC_HSYNC		PINMUX_PIN(PIN_PD4, 1, 1)
+#define PIN_PD4__FLEXCOM1_IO2		PINMUX_PIN(PIN_PD4, 2, 1)
+#define PIN_PD4__TIOB0			PINMUX_PIN(PIN_PD4, 3, 2)
+#define PIN_PD4__FLEXCOM7_IO1		PINMUX_PIN(PIN_PD4, 4, 3)
+
+#define PIN_PD5				101
+#define PIN_PD5__GPIO			PINMUX_PIN(PIN_PD5, 0, 0)
+#define PIN_PD5__LCDC_VSYNC		PINMUX_PIN(PIN_PD5, 1, 1)
+#define PIN_PD5__FLEXCOM1_IO3		PINMUX_PIN(PIN_PD5, 2, 1)
+#define PIN_PD5__TCLK0			PINMUX_PIN(PIN_PD5, 3, 2)
+#define PIN_PD5__FLEXCOM7_IO0		PINMUX_PIN(PIN_PD5, 4, 3)
+
+#define PIN_PD6				102
+#define PIN_PD6__GPIO			PINMUX_PIN(PIN_PD6, 0, 0)
+#define PIN_PD6__LCDC_PWM		PINMUX_PIN(PIN_PD6, 1, 1)
+#define PIN_PD6__FLEXCOM1_IO1		PINMUX_PIN(PIN_PD6, 2, 1)
+#define PIN_PD6__FLEXCOM7_IO2		PINMUX_PIN(PIN_PD6, 4, 3)
+
+#define PIN_PD7				103
+#define PIN_PD7__GPIO			PINMUX_PIN(PIN_PD7, 0, 0)
+#define PIN_PD7__LCDC_DISP		PINMUX_PIN(PIN_PD7, 1, 1)
+#define PIN_PD7__FLEXCOM1_IO0		PINMUX_PIN(PIN_PD7, 2, 1)
+#define PIN_PD7__FLEXCOM7_IO3		PINMUX_PIN(PIN_PD7, 4, 3)
+
+#define PIN_PD8				104
+#define PIN_PD8__GPIO			PINMUX_PIN(PIN_PD8, 0, 0)
+#define PIN_PD8__CANTX0			PINMUX_PIN(PIN_PD8, 1, 1)
+#define PIN_PD8__FLEXCOM7_IO0		PINMUX_PIN(PIN_PD8, 2, 1)
+
+#define PIN_PD9				105
+#define PIN_PD9__GPIO			PINMUX_PIN(PIN_PD9, 0, 0)
+#define PIN_PD9__CANRX0			PINMUX_PIN(PIN_PD9, 1, 1)
+#define PIN_PD9__FLEXCOM7_IO1		PINMUX_PIN(PIN_PD9, 2, 1)
+
+#define PIN_PD10			106
+#define PIN_PD10__GPIO			PINMUX_PIN(PIN_PD10, 0, 0)
+#define PIN_PD10__CANTX1		PINMUX_PIN(PIN_PD10, 1, 1)
+#define PIN_PD10__FLEXCOM7_IO2		PINMUX_PIN(PIN_PD10, 2, 1)
+#define PIN_PD10__TIOA1			PINMUX_PIN(PIN_PD10, 3, 3)
+
+#define PIN_PD11			107
+#define PIN_PD11__GPIO			PINMUX_PIN(PIN_PD11, 0, 0)
+#define PIN_PD11__CANRX1		PINMUX_PIN(PIN_PD11, 1, 1)
+#define PIN_PD11__FLEXCOM7_IO3		PINMUX_PIN(PIN_PD11, 2, 1)
+#define PIN_PD11__TCLK1			PINMUX_PIN(PIN_PD11, 3, 3)
+
+#define PIN_PD12			108
+#define PIN_PD12__GPIO			PINMUX_PIN(PIN_PD12, 0, 0)
+#define PIN_PD12__CANTX2		PINMUX_PIN(PIN_PD12, 1, 1)
+#define PIN_PD12__FLEXCOM7_IO4		PINMUX_PIN(PIN_PD12, 2, 1)
+#define PIN_PD12__TIOB1			PINMUX_PIN(PIN_PD12, 3, 3)
+#define PIN_PD12__PCK2			PINMUX_PIN(PIN_PD12, 4, 2)
+#define PIN_PD12__FLEXCOM3_IO3		PINMUX_PIN(PIN_PD12, 5, 3)
+
+#define PIN_PD13			109
+#define PIN_PD13__GPIO			PINMUX_PIN(PIN_PD13, 0, 0)
+#define PIN_PD13__CANRX2		PINMUX_PIN(PIN_PD13, 1, 1)
+#define PIN_PD13__FLEXCOM5_IO4		PINMUX_PIN(PIN_PD13, 2, 1)
+#define PIN_PD13__TIOA2			PINMUX_PIN(PIN_PD13, 3, 3)
+#define PIN_PD13__PCK3			PINMUX_PIN(PIN_PD13, 4, 2)
+
+#define PIN_PD14			110
+#define PIN_PD14__GPIO			PINMUX_PIN(PIN_PD14, 0, 0)
+#define PIN_PD14__CANTX3		PINMUX_PIN(PIN_PD14, 1, 1)
+#define PIN_PD14__FLEXCOM5_IO2		PINMUX_PIN(PIN_PD14, 2, 1)
+#define PIN_PD14__TIOB2			PINMUX_PIN(PIN_PD14, 3, 3)
+
+#define PIN_PD15			111
+#define PIN_PD15__GPIO			PINMUX_PIN(PIN_PD15, 0, 0)
+#define PIN_PD15__CANRX3		PINMUX_PIN(PIN_PD15, 1, 1)
+#define PIN_PD15__FLEXCOM5_IO3		PINMUX_PIN(PIN_PD15, 2, 1)
+#define PIN_PD15__TCLK2			PINMUX_PIN(PIN_PD15, 3, 3)
+
+#define PIN_PD16			112
+#define PIN_PD16__GPIO			PINMUX_PIN(PIN_PD16, 0, 0)
+#define PIN_PD16__CANTX4		PINMUX_PIN(PIN_PD16, 1, 1)
+#define PIN_PD16__FLEXCOM5_IO0		PINMUX_PIN(PIN_PD16, 2, 1)
+
+#define PIN_PD17			113
+#define PIN_PD17__GPIO			PINMUX_PIN(PIN_PD17, 0, 0)
+#define PIN_PD17__CANRX4		PINMUX_PIN(PIN_PD17, 1, 1)
+#define PIN_PD17__FLEXCOM5_IO1		PINMUX_PIN(PIN_PD17, 2, 1)
+
+#define PIN_PD18			114
+#define PIN_PD18__GPIO			PINMUX_PIN(PIN_PD18, 0, 0)
+#define PIN_PD18__FLEXCOM6_IO0		PINMUX_PIN(PIN_PD18, 2, 4)
+#define PIN_PD18__CANTX1		PINMUX_PIN(PIN_PD18, 3, 2)
+#define PIN_PD18__PCK4			PINMUX_PIN(PIN_PD18, 4, 2)
+
+#define PIN_PD19			115
+#define PIN_PD19__GPIO			PINMUX_PIN(PIN_PD19, 0, 0)
+#define PIN_PD19__FLEXCOM6_IO1		PINMUX_PIN(PIN_PD19, 2, 4)
+#define PIN_PD19__CANRX1		PINMUX_PIN(PIN_PD19, 3, 2)
+#define PIN_PD19__PCK2			PINMUX_PIN(PIN_PD19, 4, 3)
+
+#define PIN_PD20			116
+#define PIN_PD20__GPIO			PINMUX_PIN(PIN_PD20, 0, 0)
+#define PIN_PD20__PFLEXCOM6_IO2		PINMUX_PIN(PIN_PD20, 2, 4)
+#define PIN_PD20__I2SMCC1_MCK		PINMUX_PIN(PIN_PD20, 3, 2)
+#define PIN_PD20__PCK3			PINMUX_PIN(PIN_PD20, 4, 3)
+
+#define PIN_PD21			117
+#define PIN_PD21__GPIO			PINMUX_PIN(PIN_PD21, 0, 0)
+#define PIN_PD21__G1_TXCTL		PINMUX_PIN(PIN_PD21, 1, 2)
+#define PIN_PD21__FLEXCOM6_IO2		PINMUX_PIN(PIN_PD21, 2, 3)
+#define PIN_PD21__TK1			PINMUX_PIN(PIN_PD21, 3, 1)
+
+#define PIN_PD22			118
+#define PIN_PD22__GPIO			PINMUX_PIN(PIN_PD22, 0, 0)
+#define PIN_PD22__G1_TX0		PINMUX_PIN(PIN_PD22, 1, 1)
+#define PIN_PD22__FLEXCOM6_IO3		PINMUX_PIN(PIN_PD22, 2, 3)
+#define PIN_PD22__TF1			PINMUX_PIN(PIN_PD22, 3, 1)
+
+#define PIN_PD23			119
+#define PIN_PD23__GPIO			PINMUX_PIN(PIN_PD23, 0, 0)
+#define PIN_PD23__G1_TX1		PINMUX_PIN(PIN_PD23, 1, 1)
+#define PIN_PD23__FLEXCOM6_IO4		PINMUX_PIN(PIN_PD23, 2, 3)
+#define PIN_PD23__TD1			PINMUX_PIN(PIN_PD23, 3, 1)
+
+#define PIN_PD24			120
+#define PIN_PD24__GPIO			PINMUX_PIN(PIN_PD24, 0, 0)
+#define PIN_PD24__G1_RXCTL		PINMUX_PIN(PIN_PD24, 1, 1)
+#define PIN_PD24__FLEXCOM6_IO0		PINMUX_PIN(PIN_PD24, 2, 3)
+#define PIN_PD24__RD1			PINMUX_PIN(PIN_PD24, 3, 1)
+#define PIN_PD24__PDMC0_DS1		PINMUX_PIN(PIN_PD24, 5, 3)
+
+#define PIN_PD25			121
+#define PIN_PD25__GPIO			PINMUX_PIN(PIN_PD25, 0, 0)
+#define PIN_PD25__G1_MDC		PINMUX_PIN(PIN_PD25, 1, 1)
+#define PIN_PD25__FLEXCOM6_IO1		PINMUX_PIN(PIN_PD25, 2, 3)
+#define PIN_PD25__RK1			PINMUX_PIN(PIN_PD25, 3, 1)
+#define PIN_PD25__PDMC0_CLK		PINMUX_PIN(PIN_PD25, 5, 3)
+
+#define PIN_PD26			122
+#define PIN_PD26__GPIO			PINMUX_PIN(PIN_PD26, 0, 0)
+#define PIN_PD26__G1_MDIO		PINMUX_PIN(PIN_PD26, 1, 1)
+#define PIN_PD26__FLEXCOM7_IO4		PINMUX_PIN(PIN_PD26, 2, 2)
+#define PIN_PD26__RF1			PINMUX_PIN(PIN_PD26, 3, 1)
+#define PIN_PD26__I2SMCC1_DIN2		PINMUX_PIN(PIN_PD26, 4, 2)
+#define PIN_PD26__PDMC0_DS0		PINMUX_PIN(PIN_PD26, 5, 3)
+
+#define PIN_PD27			123
+#define PIN_PD27__GPIO			PINMUX_PIN(PIN_PD27, 0, 0)
+#define PIN_PD27__G1_RX0		PINMUX_PIN(PIN_PD27, 1, 1)
+#define PIN_PD27__FLEXCOM7_IO0		PINMUX_PIN(PIN_PD27, 2, 2)
+#define PIN_PD27__SPDIF_RX		PINMUX_PIN(PIN_PD27, 3, 1)
+#define PIN_PD27__I2SMCC1_DIN3		PINMUX_PIN(PIN_PD27, 4, 2)
+
+#define PIN_PD28			124
+#define PIN_PD28__GPIO			PINMUX_PIN(PIN_PD28, 0, 0)
+#define PIN_PD28__G1_RX1		PINMUX_PIN(PIN_PD28, 1, 1)
+#define PIN_PD28__FLEXCOM7_IO1		PINMUX_PIN(PIN_PD28, 2, 2)
+#define PIN_PD28__SPDIF_TX		PINMUX_PIN(PIN_PD28, 3, 1)
+#define PIN_PD28__I2SMCC1_DIN1		PINMUX_PIN(PIN_PD28, 4, 2)
+
+#define PIN_PD29			125
+#define PIN_PD29__GPIO			PINMUX_PIN(PIN_PD29, 0, 0)
+#define PIN_PD29__G1_REFCK		PINMUX_PIN(PIN_PD29, 1, 2)
+#define PIN_PD29__FLEXCOM7_IO2		PINMUX_PIN(PIN_PD29, 2, 2)
+#define PIN_PD29__I2SMCC1_DOUT3		PINMUX_PIN(PIN_PD29, 3, 2)
+
+#define PIN_PD30			126
+#define PIN_PD30__GPIO			PINMUX_PIN(PIN_PD30, 0, 0)
+#define PIN_PD30__G1_RX2		PINMUX_PIN(PIN_PD30, 1, 1)
+#define PIN_PD30__FLEXCOM7_IO3		PINMUX_PIN(PIN_PD30, 2, 2)
+#define PIN_PD30__I2SMCC1_DOUT1		PINMUX_PIN(PIN_PD30, 3, 2)
+#define PIN_PD30__PDMC1_DS1		PINMUX_PIN(PIN_PD30, 4, 3)
+#define PIN_PD30__G1_RXER		PINMUX_PIN(PIN_PD30, 5, 2)
+
+#define PIN_PD31			127
+#define PIN_PD31__GPIO			PINMUX_PIN(PIN_PD31, 0, 0)
+#define PIN_PD31__G1_RX3		PINMUX_PIN(PIN_PD31, 1, 1)
+#define PIN_PD31__FLEXCOM5_IO4		PINMUX_PIN(PIN_PD31, 2, 2)
+#define PIN_PD31__I2SMCC1_DOUT2		PINMUX_PIN(PIN_PD31, 3, 3)
+#define PIN_PD31__PDMC1_DS0		PINMUX_PIN(PIN_PD31, 4, 3)
+
+#define PIN_PE0				128
+#define PIN_PE0__GPIO			PINMUX_PIN(PIN_PE0, 0, 0)
+#define PIN_PE0__G1_TX2			PINMUX_PIN(PIN_PE0, 1, 1)
+#define PIN_PE0__FLEXCOM5_IO2		PINMUX_PIN(PIN_PE0, 2, 2)
+#define PIN_PE0__I2SMCC1_DIN0		PINMUX_PIN(PIN_PE0, 3, 2)
+#define PIN_PE0__PDMC1_CLK		PINMUX_PIN(PIN_PE0, 4, 3)
+
+#define PIN_PE1				129
+#define PIN_PE1__GPIO			PINMUX_PIN(PIN_PE1, 0, 0)
+#define PIN_PE1__G1_TX3			PINMUX_PIN(PIN_PE1, 1, 1)
+#define PIN_PE1__FLEXCOM5_IO3		PINMUX_PIN(PIN_PE1, 2, 2)
+#define PIN_PE1__I2SMCC1_WS		PINMUX_PIN(PIN_PE1, 3, 2)
+#define PIN_PE1__PDMC0_DS1		PINMUX_PIN(PIN_PE1, 4, 4)
+
+#define PIN_PE2				130
+#define PIN_PE2__GPIO			PINMUX_PIN(PIN_PE2, 0, 0)
+#define PIN_PE2__G1_RXCK		PINMUX_PIN(PIN_PE2, 1, 1)
+#define PIN_PE2__FLEXCOM5_IO1		PINMUX_PIN(PIN_PE2, 2, 2)
+#define PIN_PE2__I2SMCC1_CK		PINMUX_PIN(PIN_PE2, 3, 2)
+#define PIN_PE2__PDMC0_CLK		PINMUX_PIN(PIN_PE2, 4, 4)
+
+#define PIN_PE3				131
+#define PIN_PE3__GPIO			PINMUX_PIN(PIN_PE3, 0, 0)
+#define PIN_PE3__G1_TSUCOMP		PINMUX_PIN(PIN_PE3, 1, 1)
+#define PIN_PE3__FLEXCOM5_IO0		PINMUX_PIN(PIN_PE3, 2, 2)
+#define PIN_PE3__I2SMCC1_DOUT0		PINMUX_PIN(PIN_PE3, 3, 2)
+#define PIN_PE3__PDMC0_DS0		PINMUX_PIN(PIN_PE3, 4, 4)
+
+#define PIN_PE4				132
+#define PIN_PE4__GPIO			PINMUX_PIN(PIN_PE4, 0, 0)
+#define PIN_PE4__LCDC_DAT0		PINMUX_PIN(PIN_PE4, 1, 1)
+#define PIN_PE4__FLEXCOM2_IO2		PINMUX_PIN(PIN_PE4, 2, 1)
+#define PIN_PE4__PWML0			PINMUX_PIN(PIN_PE4, 3, 2)
+#define PIN_PE4__TIOA3			PINMUX_PIN(PIN_PE4, 4, 1)
+#define PIN_PE4__I2SMCC0_DIN1		PINMUX_PIN(PIN_PE4, 5, 2)
+
+#define PIN_PE5				133
+#define PIN_PE5__GPIO			PINMUX_PIN(PIN_PE5, 0, 0)
+#define PIN_PE5__LCDC_DAT1		PINMUX_PIN(PIN_PE5, 1, 1)
+#define PIN_PE5__FLEXCOM2_IO3		PINMUX_PIN(PIN_PE5, 2, 1)
+#define PIN_PE5__PWMH0			PINMUX_PIN(PIN_PE5, 3, 2)
+#define PIN_PE5__TIOB3			PINMUX_PIN(PIN_PE5, 4, 1)
+#define PIN_PE5__I2SMCC0_DIN2		PINMUX_PIN(PIN_PE5, 5, 2)
+
+#define PIN_PE6				134
+#define PIN_PE6__GPIO			PINMUX_PIN(PIN_PE6, 0, 0)
+#define PIN_PE6__LCDC_DAT2		PINMUX_PIN(PIN_PE6, 1, 1)
+#define PIN_PE6__FLEXCOM2_IO4		PINMUX_PIN(PIN_PE6, 2, 1)
+#define PIN_PE6__PWML1			PINMUX_PIN(PIN_PE6, 3, 2)
+#define PIN_PE6__TCLK3			PINMUX_PIN(PIN_PE6, 4, 1)
+#define PIN_PE6__I2SMCC0_DIN3		PINMUX_PIN(PIN_PE6, 5, 2)
+
+#define PIN_PE7				135
+#define PIN_PE7__GPIO			PINMUX_PIN(PIN_PE7, 0, 0)
+#define PIN_PE7__LCDC_DAT3		PINMUX_PIN(PIN_PE7, 1, 1)
+#define PIN_PE7__FLEXCOM2_IO5		PINMUX_PIN(PIN_PE7, 2, 1)
+#define PIN_PE7__PWMH1			PINMUX_PIN(PIN_PE7, 3, 2)
+#define PIN_PE7__TIOA4			PINMUX_PIN(PIN_PE7, 4, 1)
+#define PIN_PE7__I2SMCC0_DOUT1		PINMUX_PIN(PIN_PE7, 5, 2)
+
+#define PIN_PE8				136
+#define PIN_PE8__GPIO			PINMUX_PIN(PIN_PE8, 0, 0)
+#define PIN_PE8__LCDC_DAT4		PINMUX_PIN(PIN_PE8, 1, 1)
+#define PIN_PE8__FLEXCOM2_IO0		PINMUX_PIN(PIN_PE8, 2, 1)
+#define PIN_PE8__PWML2			PINMUX_PIN(PIN_PE8, 3, 2)
+#define PIN_PE8__TIOB4			PINMUX_PIN(PIN_PE8, 4, 1)
+#define PIN_PE8__I2SMCC0_CK		PINMUX_PIN(PIN_PE8, 5, 2)
+
+#define PIN_PE9				137
+#define PIN_PE9__GPIO			PINMUX_PIN(PIN_PE9, 0, 0)
+#define PIN_PE9__LCDC_DAT5		PINMUX_PIN(PIN_PE9, 1, 1)
+#define PIN_PE9__FLEXCOM2_IO1		PINMUX_PIN(PIN_PE9, 2, 1)
+#define PIN_PE9__PWMH2			PINMUX_PIN(PIN_PE9, 3, 2)
+#define PIN_PE9__TCLK4			PINMUX_PIN(PIN_PE9, 4, 1)
+#define PIN_PE9__I2SMCC0_WS		PINMUX_PIN(PIN_PE9, 5, 2)
+
+#define PIN_PE10			138
+#define PIN_PE10__GPIO			PINMUX_PIN(PIN_PE10, 0, 0)
+#define PIN_PE10__LCDC_DAT6		PINMUX_PIN(PIN_PE10, 1, 1)
+#define PIN_PE10__FLEXCOM2_IO6		PINMUX_PIN(PIN_PE10, 2, 1)
+#define PIN_PE10__PWML3			PINMUX_PIN(PIN_PE10, 3, 2)
+#define PIN_PE10__TIOA5			PINMUX_PIN(PIN_PE10, 4, 1)
+#define PIN_PE10__I2SMCC0_DOUT2		PINMUX_PIN(PIN_PE10, 5, 2)
+
+#define PIN_PE11			139
+#define PIN_PE11__GPIO			PINMUX_PIN(PIN_PE11, 0, 0)
+#define PIN_PE11__LCDC_DAT7		PINMUX_PIN(PIN_PE11, 1, 1)
+#define PIN_PE11__PWMH3			PINMUX_PIN(PIN_PE11, 3, 2)
+#define PIN_PE11__TIOB5			PINMUX_PIN(PIN_PE11, 4, 1)
+#define PIN_PE11__I2SMCC0_DOUT3		PINMUX_PIN(PIN_PE11, 5, 2)
+
+#define PIN_PE12			140
+#define PIN_PE12__GPIO			PINMUX_PIN(PIN_PE12, 0, 0)
+#define PIN_PE12__LCDC_DEN		PINMUX_PIN(PIN_PE12, 1, 1)
+#define PIN_PE12__PCK3			PINMUX_PIN(PIN_PE12, 2, 4)
+#define PIN_PE12__PWMEXTRG0		PINMUX_PIN(PIN_PE12, 3, 2)
+#define PIN_PE12__TCLK5			PINMUX_PIN(PIN_PE12, 4, 1)
+#define PIN_PE12__I2SMCC0_DIN0		PINMUX_PIN(PIN_PE12, 5, 2)
+
+#define PIN_PE13			141
+#define PIN_PE13__GPIO			PINMUX_PIN(PIN_PE13, 0, 0)
+#define PIN_PE13__LCDC_PCK		PINMUX_PIN(PIN_PE13, 1, 1)
+#define PIN_PE13__PCK4			PINMUX_PIN(PIN_PE13, 2, 3)
+#define PIN_PE13__PWMEXTRG1		PINMUX_PIN(PIN_PE13, 3, 2)
+#define PIN_PE13__I2SMCC0DOUT0		PINMUX_PIN(PIN_PE13, 5, 2)
diff --git a/arch/arm/boot/dts/microchip/sama7d65.dtsi b/arch/arm/boot/dts/microchip/sama7d65.dtsi
new file mode 100644
index 000000000000..cd2cf9a6f40b
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama7d65.dtsi
@@ -0,0 +1,740 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ *  sama7d65.dtsi - Device Tree Include file for SAMA7D65 SoC
+ *
+ *  Copyright (C) 2024 Microchip Technology Inc. and its subsidiaries
+ *
+ *  Author: Ryan Wanner <Ryan.Wanner@microchip.com>
+ *
+ */
+
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/mfd/at91-usart.h>
+
+/ {
+	model = "Microchip SAMA7D65 family SoC";
+	compatible = "microchip,sama7d65";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			device_type = "cpu";
+			clocks = <&pmc PMC_TYPE_CORE PMC_CPUPLL>;
+			clock-names = "cpu";
+			d-cache-size = <0x8000>;	// L1, 32 KB
+			i-cache-size = <0x8000>;	// L1, 32 KB
+			next-level-cache = <&L2>;
+
+			L2: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x40000>; // L2, 256 KB
+				cache-unified;
+			};
+		};
+	};
+
+	clocks {
+		main_xtal: clock-mainxtal {
+			compatible = "fixed-clock";
+			clock-output-names = "main_xtal";
+			#clock-cells = <0>;
+		};
+
+		slow_xtal: clock-slowxtal {
+			compatible = "fixed-clock";
+			clock-output-names = "slow_xtal";
+			#clock-cells = <0>;
+		};
+	};
+
+	ns_sram: sram@100000 {
+		compatible = "mmio-sram";
+		reg = <0x100000 0x20000>;
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		securam: sram@e0000800 {
+			compatible = "microchip,sama7d65-securam", "atmel,sama5d2-securam", "mmio-sram";
+			reg = <0xe0000800 0x4000>;
+			ranges = <0 0xe0000800 0x4000>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 17>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			no-memory-wc;
+		};
+
+		secumod: security-module@e0004000 {
+			compatible = "microchip,sama7d65-secumod", "atmel,sama5d2-secumod", "syscon";
+			reg = <0xe0004000 0x4000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		sfrbu: sfr@e0008000 {
+			compatible = "microchip,sama7d65-sfrbu", "atmel,sama5d2-sfrbu", "syscon";
+			reg = <0xe0008000 0x20>;
+		};
+
+		pioa: pinctrl@e0014000 {
+			compatible = "microchip,sama7d65-pinctrl", "microchip,sama7g5-pinctrl";
+			reg = <0xe0014000 0x800>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		pmc: clock-controller@e0018000 {
+			compatible = "microchip,sama7d65-pmc", "syscon";
+			reg = <0xe0018000 0x200>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#clock-cells = <2>;
+			clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>;
+			clock-names = "td_slck", "md_slck", "main_xtal";
+		};
+
+		ps_wdt: watchdog@e001d000 {
+			compatible = "microchip,sama7d65-wdt", "microchip,sama7g5-wdt";
+			reg = <0xe001d000 0x30>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk32k 0>;
+		};
+
+		reset_controller: reset-controller@e001d100 {
+			compatible = "microchip,sama7d65-rstc", "microchip,sama7g5-rstc";
+			reg = <0xe001d100 0xc>, <0xe001d1e4 0x4>;
+			#reset-cells = <1>;
+			clocks = <&clk32k 0>;
+		};
+
+		shdwc: poweroff@e001d200 {
+			compatible = "microchip,sama7d65-shdwc", "microchip,sama7g5-shdwc", "syscon";
+			reg = <0xe001d200 0x20>;
+			clocks = <&clk32k 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			atmel,wakeup-rtc-timer;
+			atmel,wakeup-rtt-timer;
+			status = "disabled";
+		};
+
+		rtt: rtc@e001d300 {
+			compatible = "microchip,sama7d65-rtt", "atmel,at91sam9260-rtt";
+			reg = <0xe001d300 0x30>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk32k 0>;
+		};
+
+		clk32k: clock-controller@e001d500 {
+			compatible = "microchip,sama7d65-sckc", "microchip,sam9x60-sckc";
+			reg = <0xe001d500 0x4>;
+			clocks = <&slow_xtal>;
+			#clock-cells = <1>;
+		};
+
+		gpbr: syscon@e001d700 {
+			compatible = "microchip,sama7d65-gpbr", "syscon";
+			reg = <0xe001d700 0x48>;
+		};
+
+		rtc: rtc@e001d800 {
+			compatible = "microchip,sama7d65-rtc", "microchip,sam9x60-rtc";
+			reg = <0xe001d800 0x30>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk32k 1>;
+		};
+
+		chipid@e0020000 {
+			compatible = "microchip,sama7d65-chipid";
+			reg = <0xe0020000 0x8>;
+		};
+
+		can0: can@e0828000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0828000 0x200>, <0x100000 0x7800>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 58>, <&pmc PMC_TYPE_GCK 58>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 58>;
+			assigned-clock-rates = <40000000>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			bosch,mram-cfg = <0x3400 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can1: can@e082c000 {
+			compatible = "bosch,m_can";
+			reg = <0xe082c000 0x200>, <0x100000 0xbc00>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 59>, <&pmc PMC_TYPE_GCK 59>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 59>;
+			assigned-clock-rates = <40000000>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			bosch,mram-cfg = <0x7800 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can2: can@e0830000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0830000 0x200>, <0x100000 0x10000>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 60>, <&pmc PMC_TYPE_GCK 60>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 60>;
+			assigned-clock-rates = <40000000>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			bosch,mram-cfg = <0xbc00 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can3: can@e0834000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0834000 0x200>, <0x110000 0x4400>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 61>, <&pmc PMC_TYPE_GCK 61>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 61>;
+			assigned-clock-rates = <40000000>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can4: can@e0838000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0838000 0x200>, <0x110000 0x8800>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 62>, <&pmc PMC_TYPE_GCK 62>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 62>;
+			assigned-clock-rates = <40000000>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			bosch,mram-cfg = <0x4400 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		dma2: dma-controller@e1200000 {
+			compatible = "microchip,sama7d65-dma", "microchip,sama7g5-dma";
+			reg = <0xe1200000 0x1000>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
+			clock-names = "dma_clk";
+			dma-requests = <0>;
+			status = "disabled";
+		};
+
+		sdmmc1: mmc@e1208000 {
+			compatible = "microchip,sama7d65-sdhci", "microchip,sam9x60-sdhci";
+			reg = <0xe1208000 0x400>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 76>, <&pmc PMC_TYPE_GCK 76>;
+			clock-names = "hclock", "multclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 76>;
+			assigned-clock-rates = <200000000>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_MCK1>;
+			status = "disabled";
+		};
+
+		aes: crypto@e1600000 {
+			compatible = "microchip,sama7d65-aes", "atmel,at91sam9g46-aes";
+			reg = <0xe1600000 0x100>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 26>;
+			clock-names = "aes_clk";
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(1)>,
+			       <&dma0 AT91_XDMAC_DT_PERID(2)>;
+			dma-names = "tx", "rx";
+		};
+
+		sha: crypto@e1604000 {
+			compatible = "microchip,sama7d65-sha", "atmel,at91sam9g46-sha";
+			reg = <0xe1604000 0x100>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 78>;
+			clock-names = "sha_clk";
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(48)>;
+			dma-names = "tx";
+		};
+
+		tdes: crypto@e1608000 {
+			compatible = "microchip,sama7d65-tdes", "atmel,at91sam9g46-tdes";
+			reg = <0xe1608000 0x100>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 91>;
+			clock-names = "tdes_clk";
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(54)>,
+			       <&dma0 AT91_XDMAC_DT_PERID(53)>;
+			dma-names = "tx", "rx";
+		};
+
+		trng: rng@e160c000 {
+			compatible = "microchip,sama7d65-trng", "microchip,sam9x60-trng";
+			reg = <0xe160c000 0x100>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 92>;
+		};
+
+		dma0: dma-controller@e1610000 {
+			compatible = "microchip,sama7d65-dma", "microchip,sama7g5-dma";
+			reg = <0xe1610000 0x1000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+			clock-names = "dma_clk";
+			status = "disabled";
+		};
+
+		dma1: dma-controller@e1614000 {
+			compatible = "microchip,sama7d65-dma", "microchip,sama7g5-dma";
+			reg = <0xe1614000 0x1000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
+			clock-names = "dma_clk";
+			status = "disabled";
+		};
+
+		gmac0: ethernet@e1618000 {
+			compatible = "microchip,sama7d65-gem", "microchip,sama7g5-gem";
+			reg = <0xe1618000 0x2000>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_GCK 46>, <&pmc PMC_TYPE_GCK 49>;
+			clock-names = "pclk", "hclk", "tx_clk", "tsu_clk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 46>, <&pmc PMC_TYPE_GCK 49>;
+			assigned-clock-rates = <125000000>, <200000000>;
+			status = "disabled";
+		};
+
+		gmac1: ethernet@e161c000 {
+			compatible = "microchip,sama7d65-gem", "microchip,sama7g5-gem";
+			reg = <0xe161c000 0x2000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 47>, <&pmc PMC_TYPE_PERIPHERAL 47>,<&pmc PMC_TYPE_GCK 47>, <&pmc PMC_TYPE_GCK 50>;
+			clock-names = "pclk", "hclk", "tx_clk", "tsu_clk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 47>, <&pmc PMC_TYPE_GCK 50>;
+			assigned-clock-rates = <125000000>, <200000000>;
+			status = "disabled";
+		};
+
+		pit64b0: timer@e1800000 {
+			compatible = "microchip,sama7d65-pit64b", "microchip,sam9x60-pit64b";
+			reg = <0xe1800000 0x100>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 66>, <&pmc PMC_TYPE_GCK 66>;
+			clock-names = "pclk", "gclk";
+		};
+
+		pit64b1: timer@e1804000 {
+			compatible = "microchip,sama7d65-pit64b", "microchip,sam9x60-pit64b";
+			reg = <0xe1804000 0x100>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 67>, <&pmc PMC_TYPE_GCK 67>;
+			clock-names = "pclk", "gclk";
+		};
+
+		pwm: pwm@e1818000 {
+			compatible = "microchip,sama7d65-pwm", "atmel,sama5d2-pwm";
+			reg = <0xe1818000 0x500>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 72>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		flx0: flexcom@e1820000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe1820000 0x200>;
+			ranges = <0x0 0xe1820000 0x800>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 34>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			uart0: serial@200 {
+				compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 34>;
+				clock-names = "usart";
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(6)>,
+				       <&dma1 AT91_XDMAC_DT_PERID(5)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@600 {
+				compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 34>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				atmel,fifo-size = <32>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(6)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(5)>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		flx1: flexcom@e1824000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe1824000 0x200>;
+			ranges = <0x0 0xe1824000 0x800>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 35>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			spi1: spi@400 {
+				compatible = "microchip,sama7d65-spi", "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 35>;
+				clock-names = "spi_clk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(7)>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@600 {
+				compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 35>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(7)>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+		};
+
+		flx2: flexcom@e1828000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe1828000 0x200>;
+			ranges = <0x0 0xe1828000 0x800>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 36>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			uart2: serial@200 {
+				compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 36>;
+				clock-names = "usart";
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(10)>,
+				       <&dma1 AT91_XDMAC_DT_PERID(9)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+		};
+
+		flx3: flexcom@e182c000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe182c000 0x200>;
+			ranges = <0x0 0xe182c000 0x800>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			uart3: serial@200 {
+				compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
+				clock-names = "usart";
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(12)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(11)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@600 {
+				compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(12)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(11)>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+
+		};
+
+		flx4: flexcom@e2018000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe2018000 0x200>;
+			ranges = <0x0 0xe2018000 0x800>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			uart4: serial@200 {
+				compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+				clock-names = "usart";
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(14)>,
+				       <&dma1 AT91_XDMAC_DT_PERID(13)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <32>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
+			spi4: spi@400 {
+				compatible = "microchip,sama7d65-spi", "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+				clock-names = "spi_clk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(14)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(13)>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+		};
+
+		flx5: flexcom@e201c000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe201c000 0x200>;
+			ranges = <0x0 0xe201c000 0x800>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			i2c5: i2c@600 {
+				compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(16)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(15)>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+		};
+
+		flx6: flexcom@e2020000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe2020000 0x200>;
+			ranges = <0x0 0xe2020000 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
+			status = "disabled";
+
+			uart6: serial@200 {
+				compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
+				clock-names = "usart";
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+		};
+
+		flx7: flexcom@e2024000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe2024000 0x200>;
+			ranges = <0x0 0xe2024000 0x800>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			uart7: serial@200 {
+				compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
+				clock-names = "usart";
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(20)>,
+				       <&dma1 AT91_XDMAC_DT_PERID(19)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <32>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+		};
+
+		flx8: flexcom@e281c000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe281c000 0x200>;
+			ranges = <0x0 0xe281c000 0x800>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			i2c8: i2c@600 {
+				compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(22)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(21)>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+		};
+
+		flx9: flexcom@e2820000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe2820000 0x200>;
+			ranges = <0x0 0xe281c000 0x800>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			i2c9: i2c@600 {
+				compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(24)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(23)>;
+				dma-names = "tx", "rx";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+		};
+
+		flx10: flexcom@e2824000 {
+			compatible = "microchip,sama7d65-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe2824000 0x200>;
+			ranges = <0x0 0xe2824000 0x800>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 44>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			i2c10: i2c@600 {
+				compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 44>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+		};
+
+		uddrc: uddrc@e3800000 {
+			compatible = "microchip,sama7d65-uddrc", "microchip,sama7g5-uddrc";
+			reg = <0xe3800000 0x4000>;
+		};
+
+		ddr3phy: ddr3phy@e3804000 {
+			compatible = "microchip,sama7d65-ddr3phy", "microchip,sama7g5-ddr3phy";
+			reg = <0xe3804000 0x1000>;
+		};
+
+		gic: interrupt-controller@e8c11000 {
+			compatible = "arm,cortex-a7-gic";
+			reg = <0xe8c11000 0x1000>,
+			      <0xe8c12000 0x2000>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sama7g5-pinfunc.h b/arch/arm/boot/dts/microchip/sama7g5-pinfunc.h
index 22fe9e522a97..a67a156e26ab 100644
--- a/arch/arm/boot/dts/sama7g5-pinfunc.h
+++ b/arch/arm/boot/dts/microchip/sama7g5-pinfunc.h
@@ -261,7 +261,7 @@
 #define PIN_PB2__FLEXCOM6_IO0		PINMUX_PIN(PIN_PB2, 2, 1)
 #define PIN_PB2__ADTRG			PINMUX_PIN(PIN_PB2, 3, 1)
 #define PIN_PB2__A20			PINMUX_PIN(PIN_PB2, 4, 1)
-#define PIN_PB2__FLEXCOM11_IO0		PINMUX_PIN(PIN_PB2, 6, 3)
+#define PIN_PB2__FLEXCOM11_IO1		PINMUX_PIN(PIN_PB2, 6, 3)
 #define PIN_PB3				35
 #define PIN_PB3__GPIO			PINMUX_PIN(PIN_PB3, 0, 0)
 #define PIN_PB3__RF1			PINMUX_PIN(PIN_PB3, 1, 1)
@@ -673,7 +673,7 @@
 #define PIN_PD8__GPIO			PINMUX_PIN(PIN_PD8, 0, 0)
 #define PIN_PD8__SDMMC2_DAT3		PINMUX_PIN(PIN_PD8, 1, 1)
 #define PIN_PD8__I2SMCC0_DIN0		PINMUX_PIN(PIN_PD8, 3, 1)
-#define PIN_PD8__A11_NANDCLE		PINMUX_PIN(PIN_PD8, 4, 2)
+#define PIN_PD8__A22_NANDCLE		PINMUX_PIN(PIN_PD8, 4, 2)
 #define PIN_PD8__TIOA2			PINMUX_PIN(PIN_PD8, 5, 2)
 #define PIN_PD8__FLEXCOM11_IO0		PINMUX_PIN(PIN_PD8, 6, 5)
 #define PIN_PD9				105
@@ -765,7 +765,7 @@
 #define PIN_PD20__PCK0			PINMUX_PIN(PIN_PD20, 1, 3)
 #define PIN_PD20__FLEXCOM2_IO3		PINMUX_PIN(PIN_PD20, 2, 2)
 #define PIN_PD20__PWMH3			PINMUX_PIN(PIN_PD20, 3, 4)
-#define PIN_PD20__CANTX4		PINMUX_PIN(PIN_PD20, 5, 2)
+#define PIN_PD20__CANTX4		PINMUX_PIN(PIN_PD20, 4, 2)
 #define PIN_PD20__FLEXCOM5_IO0		PINMUX_PIN(PIN_PD20, 6, 5)
 #define PIN_PD21			117
 #define PIN_PD21__GPIO			PINMUX_PIN(PIN_PD21, 0, 0)
diff --git a/arch/arm/boot/dts/microchip/sama7g5.dtsi b/arch/arm/boot/dts/microchip/sama7g5.dtsi
new file mode 100644
index 000000000000..03ef3d9aaeec
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sama7g5.dtsi
@@ -0,0 +1,1053 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ *  sama7g5.dtsi - Device Tree Include file for SAMA7G5 family SoC
+ *
+ *  Copyright (C) 2020 Microchip Technology, Inc. and its subsidiaries
+ *
+ *  Author: Eugen Hristev <eugen.hristev@microchip.com>
+ *  Author: Claudiu Beznea <claudiu.beznea@microchip.com>
+ *
+ */
+
+#include <dt-bindings/iio/adc/at91-sama5d2_adc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/at91-usart.h>
+#include <dt-bindings/nvmem/microchip,sama7g5-otpc.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	model = "Microchip SAMA7G5 family SoC";
+	compatible = "microchip,sama7g5";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_CPUPLL>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+			d-cache-size = <0x8000>;	// L1, 32 KB
+			i-cache-size = <0x8000>;	// L1, 32 KB
+			next-level-cache = <&L2>;
+
+			L2: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x40000>; // L2, 256 KB
+				cache-unified;
+			};
+		};
+	};
+
+	cpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-90000000 {
+			opp-hz = /bits/ 64 <90000000>;
+			opp-microvolt = <1050000 1050000 1225000>;
+			clock-latency-ns = <320000>;
+		};
+
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			opp-microvolt = <1050000 1050000 1225000>;
+			clock-latency-ns = <320000>;
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1050000 1050000 1225000>;
+			clock-latency-ns = <320000>;
+			opp-suspend;
+		};
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1150000 1125000 1225000>;
+			clock-latency-ns = <320000>;
+		};
+
+		opp-1000000002 {
+			opp-hz = /bits/ 64 <1000000002>;
+			opp-microvolt = <1250000 1225000 1300000>;
+			clock-latency-ns = <320000>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&thermal_sensor>;
+
+			trips {
+				cpu_normal: cpu-alert0 {
+					temperature = <90000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				cpu_hot: cpu-alert1 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				cpu_critical: cpu-critical {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_normal>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&cpu_hot>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	clocks {
+		slow_xtal: clock-slowxtal {
+			compatible = "fixed-clock";
+			clock-output-names = "slow_xtal";
+			#clock-cells = <0>;
+		};
+
+		main_xtal: clock-mainxtal {
+			compatible = "fixed-clock";
+			clock-output-names = "main_xtal";
+			#clock-cells = <0>;
+		};
+
+		usb_clk: clock-usbclk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-output-names = "usb_clk";
+			clock-frequency = <48000000>;
+		};
+	};
+
+	vddout25: fixed-regulator-vddout25 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VDDOUT25";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-boot-on;
+		status = "disabled";
+	};
+
+	ns_sram: sram@100000 {
+		compatible = "mmio-sram";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x100000 0x20000>;
+		ranges;
+	};
+
+	thermal_sensor: thermal-sensor {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&adc AT91_SAMA7G5_ADC_TEMP_CHANNEL>;
+		io-channel-names = "sensor-channel";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		nfc_sram: sram@600000 {
+			compatible = "mmio-sram";
+			no-memory-wc;
+			reg = <0x00600000 0x2400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x00600000 0x2400>;
+		};
+
+		nfc_io: nfc-io@10000000 {
+			compatible = "atmel,sama5d3-nfc-io", "syscon";
+			reg = <0x10000000 0x8000000>;
+		};
+
+		ebi: ebi@40000000 {
+			compatible = "atmel,sama5d3-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&hsmc>;
+			reg = <0x40000000 0x20000000>;
+			ranges = <0x0 0x0 0x40000000 0x8000000
+				  0x1 0x0 0x48000000 0x8000000
+				  0x2 0x0 0x50000000 0x8000000
+				  0x3 0x0 0x58000000 0x8000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK1>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,sama5d3-nand-controller";
+				atmel,nfc-sram = <&nfc_sram>;
+				atmel,nfc-io = <&nfc_io>;
+				ecc-engine = <&pmecc>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+
+		securam: sram@e0000000 {
+			compatible = "microchip,sama7g5-securam", "atmel,sama5d2-securam", "mmio-sram";
+			reg = <0xe0000000 0x4000>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0xe0000000 0x4000>;
+			no-memory-wc;
+		};
+
+		secumod: secumod@e0004000 {
+			compatible = "microchip,sama7g5-secumod", "atmel,sama5d2-secumod", "syscon";
+			reg = <0xe0004000 0x4000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		sfrbu: sfr@e0008000 {
+			compatible = "microchip,sama7g5-sfrbu", "atmel,sama5d2-sfrbu", "syscon";
+			reg = <0xe0008000 0x20>;
+		};
+
+		pioA: pinctrl@e0014000 {
+			compatible = "microchip,sama7g5-pinctrl";
+			reg = <0xe0014000 0x800>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+		};
+
+		pmc: clock-controller@e0018000 {
+			compatible = "microchip,sama7g5-pmc", "syscon";
+			reg = <0xe0018000 0x200>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#clock-cells = <2>;
+			clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>;
+			clock-names = "td_slck", "md_slck", "main_xtal";
+		};
+
+		reset_controller: reset-controller@e001d000 {
+			compatible = "microchip,sama7g5-rstc";
+			reg = <0xe001d000 0xc>, <0xe001d0e4 0x4>;
+			#reset-cells = <1>;
+			clocks = <&clk32k 0>;
+		};
+
+		shdwc: poweroff@e001d010 {
+			compatible = "microchip,sama7g5-shdwc", "syscon";
+			reg = <0xe001d010 0x10>;
+			clocks = <&clk32k 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			atmel,wakeup-rtc-timer;
+			atmel,wakeup-rtt-timer;
+			status = "disabled";
+		};
+
+		rtt: rtc@e001d020 {
+			compatible = "microchip,sama7g5-rtt", "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt";
+			reg = <0xe001d020 0x30>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk32k 1>;
+		};
+
+		clk32k: clock-controller@e001d050 {
+			compatible = "microchip,sama7g5-sckc", "microchip,sam9x60-sckc";
+			reg = <0xe001d050 0x4>;
+			clocks = <&slow_xtal>;
+			#clock-cells = <1>;
+		};
+
+		gpbr: gpbr@e001d060 {
+			compatible = "microchip,sama7g5-gpbr", "syscon";
+			reg = <0xe001d060 0x48>;
+		};
+
+		rtc: rtc@e001d0a8 {
+			compatible = "microchip,sama7g5-rtc", "microchip,sam9x60-rtc";
+			reg = <0xe001d0a8 0x30>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk32k 1>;
+		};
+
+		ps_wdt: watchdog@e001d180 {
+			compatible = "microchip,sama7g5-wdt";
+			reg = <0xe001d180 0x24>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk32k 0>;
+		};
+
+		chipid@e0020000 {
+			compatible = "microchip,sama7g5-chipid";
+			reg = <0xe0020000 0x8>;
+		};
+
+		tcb1: timer@e0800000 {
+			compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xe0800000 0x100>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 91>, <&pmc PMC_TYPE_PERIPHERAL 92>, <&pmc PMC_TYPE_PERIPHERAL 93>, <&clk32k 1>;
+			clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+		};
+
+		hsmc: hsmc@e0808000 {
+			compatible = "atmel,sama5d2-smc", "syscon", "simple-mfd";
+			reg = <0xe0808000 0x1000>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pmecc: ecc-engine@e0808070 {
+				compatible = "atmel,sama5d2-pmecc";
+				reg = <0xe0808070 0x490>,
+				      <0xe0808500 0x200>;
+			};
+		};
+
+		qspi0: spi@e080c000 {
+			compatible = "microchip,sama7g5-ospi";
+			reg = <0xe080c000 0x400>, <0x20000000 0x10000000>;
+			reg-names = "qspi_base", "qspi_mmap";
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(41)>,
+			       <&dma0 AT91_XDMAC_DT_PERID(40)>;
+			dma-names = "tx", "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 78>, <&pmc PMC_TYPE_GCK 78>;
+			clock-names = "pclk", "gclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		qspi1: spi@e0810000 {
+			compatible = "microchip,sama7g5-qspi";
+			reg = <0xe0810000 0x400>, <0x30000000 0x10000000>;
+			reg-names = "qspi_base", "qspi_mmap";
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(43)>,
+			       <&dma0 AT91_XDMAC_DT_PERID(42)>;
+			dma-names = "tx", "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 79>, <&pmc PMC_TYPE_GCK 79>;
+			clock-names = "pclk", "gclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		can0: can@e0828000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0828000 0x100>, <0x100000 0x7800>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 61>, <&pmc PMC_TYPE_GCK 61>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 61>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x3400 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can1: can@e082c000 {
+			compatible = "bosch,m_can";
+			reg = <0xe082c000 0x100>, <0x100000 0xbc00>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 62>, <&pmc PMC_TYPE_GCK 62>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 62>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x7800 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can2: can@e0830000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0830000 0x100>, <0x100000 0x10000>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 63>, <&pmc PMC_TYPE_GCK 63>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 63>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0xbc00 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can3: can@e0834000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0834000 0x100>, <0x110000 0x4400>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 64>, <&pmc PMC_TYPE_GCK 64>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 64>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can4: can@e0838000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0838000 0x100>, <0x110000 0x8800>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 65>, <&pmc PMC_TYPE_GCK 65>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 65>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x4400 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can5: can@e083c000 {
+			compatible = "bosch,m_can";
+			reg = <0xe083c000 0x100>, <0x110000 0xcc00>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 66>, <&pmc PMC_TYPE_GCK 66>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 66>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x8800 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		adc: adc@e1000000 {
+			compatible = "microchip,sama7g5-adc";
+			reg = <0xe1000000 0x200>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_GCK 26>;
+			assigned-clocks = <&pmc PMC_TYPE_GCK 26>;
+			assigned-clock-rates = <100000000>;
+			clock-names = "adc_clk";
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(0)>;
+			dma-names = "rx";
+			atmel,min-sample-rate-hz = <200000>;
+			atmel,max-sample-rate-hz = <20000000>;
+			atmel,startup-time-ms = <4>;
+			#io-channel-cells = <1>;
+			nvmem-cells = <&temperature_calib>;
+			nvmem-cell-names = "temperature_calib";
+			status = "disabled";
+		};
+
+		sdmmc0: mmc@e1204000 {
+			compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci";
+			reg = <0xe1204000 0x4000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 80>, <&pmc PMC_TYPE_GCK 80>;
+			clock-names = "hclock", "multclk";
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clocks = <&pmc PMC_TYPE_GCK 80>;
+			assigned-clock-rates = <200000000>;
+			microchip,sdcal-inverted;
+			status = "disabled";
+		};
+
+		sdmmc1: mmc@e1208000 {
+			compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci";
+			reg = <0xe1208000 0x4000>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 81>, <&pmc PMC_TYPE_GCK 81>;
+			clock-names = "hclock", "multclk";
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clocks = <&pmc PMC_TYPE_GCK 81>;
+			assigned-clock-rates = <200000000>;
+			microchip,sdcal-inverted;
+			status = "disabled";
+		};
+
+		sdmmc2: mmc@e120c000 {
+			compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci";
+			reg = <0xe120c000 0x4000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 82>, <&pmc PMC_TYPE_GCK 82>;
+			clock-names = "hclock", "multclk";
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clocks = <&pmc PMC_TYPE_GCK 82>;
+			assigned-clock-rates = <200000000>;
+			microchip,sdcal-inverted;
+			status = "disabled";
+		};
+
+		csi2dc: csi2dc@e1404000 {
+			compatible = "microchip,sama7g5-csi2dc";
+			reg = <0xe1404000 0x500>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&xisc>;
+			clock-names = "pclk", "scck";
+			assigned-clocks = <&xisc>;
+			assigned-clock-rates = <266000000>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+					csi2dc_in: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					csi2dc_out: endpoint {
+						bus-width = <14>;
+						hsync-active = <1>;
+						vsync-active = <1>;
+						remote-endpoint = <&xisc_in>;
+					};
+				};
+			};
+		};
+
+		xisc: xisc@e1408000 {
+			compatible = "microchip,sama7g5-isc";
+			reg = <0xe1408000 0x2000>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 56>;
+			clock-names = "hclock";
+			#clock-cells = <0>;
+			clock-output-names = "isc-mck";
+			status = "disabled";
+
+			port {
+				xisc_in: endpoint {
+					bus-type = <5>; /* Parallel */
+					bus-width = <14>;
+					hsync-active = <1>;
+					vsync-active = <1>;
+					remote-endpoint = <&csi2dc_out>;
+				};
+			};
+		};
+
+		pwm: pwm@e1604000 {
+			compatible = "microchip,sama7g5-pwm", "atmel,sama5d2-pwm";
+			reg = <0xe1604000 0x4000>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			#pwm-cells = <3>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 77>;
+			status = "disabled";
+		};
+
+		pdmc0: sound@e1608000 {
+			compatible = "microchip,sama7g5-pdmc";
+			reg = <0xe1608000 0x1000>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			#sound-dai-cells = <0>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(37)>;
+			dma-names = "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 68>, <&pmc PMC_TYPE_GCK 68>;
+			clock-names = "pclk", "gclk";
+			status = "disabled";
+		};
+
+		pdmc1: sound@e160c000 {
+			compatible = "microchip,sama7g5-pdmc";
+			reg = <0xe160c000 0x1000>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			#sound-dai-cells = <0>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(38)>;
+			dma-names = "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 69>, <&pmc PMC_TYPE_GCK 69>;
+			clock-names = "pclk", "gclk";
+			status = "disabled";
+		};
+
+		spdifrx: spdifrx@e1614000 {
+			#sound-dai-cells = <0>;
+			compatible = "microchip,sama7g5-spdifrx";
+			reg = <0xe1614000 0x4000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(49)>;
+			dma-names = "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 84>, <&pmc PMC_TYPE_GCK 84>;
+			clock-names = "pclk", "gclk";
+			status = "disabled";
+		};
+
+		spdiftx: spdiftx@e1618000 {
+			#sound-dai-cells = <0>;
+			compatible = "microchip,sama7g5-spdiftx";
+			reg = <0xe1618000 0x4000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(50)>;
+			dma-names = "tx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 85>, <&pmc PMC_TYPE_GCK 85>;
+			clock-names = "pclk", "gclk";
+		};
+
+		i2s0: i2s@e161c000 {
+			compatible = "microchip,sama7g5-i2smcc";
+			#sound-dai-cells = <0>;
+			reg = <0xe161c000 0x4000>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(34)>, <&dma0 AT91_XDMAC_DT_PERID(33)>;
+			dma-names = "tx", "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 57>, <&pmc PMC_TYPE_GCK 57>;
+			clock-names = "pclk", "gclk";
+			status = "disabled";
+		};
+
+		i2s1: i2s@e1620000 {
+			compatible = "microchip,sama7g5-i2smcc";
+			#sound-dai-cells = <0>;
+			reg = <0xe1620000 0x4000>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(36)>, <&dma0 AT91_XDMAC_DT_PERID(35)>;
+			dma-names = "tx", "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 58>, <&pmc PMC_TYPE_GCK 58>;
+			clock-names = "pclk", "gclk";
+			status = "disabled";
+		};
+
+		eic: interrupt-controller@e1628000 {
+			compatible = "microchip,sama7g5-eic";
+			reg = <0xe1628000 0xec>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
+			clock-names = "pclk";
+			status = "disabled";
+		};
+
+		pit64b0: timer@e1800000 {
+			compatible = "microchip,sama7g5-pit64b", "microchip,sam9x60-pit64b";
+			reg = <0xe1800000 0x4000>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 70>, <&pmc PMC_TYPE_GCK 70>;
+			clock-names = "pclk", "gclk";
+		};
+
+		pit64b1: timer@e1804000 {
+			compatible = "microchip,sama7g5-pit64b", "microchip,sam9x60-pit64b";
+			reg = <0xe1804000 0x4000>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 71>, <&pmc PMC_TYPE_GCK 71>;
+			clock-names = "pclk", "gclk";
+		};
+
+		aes: crypto@e1810000 {
+			compatible = "atmel,at91sam9g46-aes";
+			reg = <0xe1810000 0x100>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 27>;
+			clock-names = "aes_clk";
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(1)>,
+			       <&dma0 AT91_XDMAC_DT_PERID(2)>;
+			dma-names = "tx", "rx";
+		};
+
+		sha: crypto@e1814000 {
+			compatible = "atmel,at91sam9g46-sha";
+			reg = <0xe1814000 0x100>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 83>;
+			clock-names = "sha_clk";
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(48)>;
+			dma-names = "tx";
+		};
+
+		flx0: flexcom@e1818000 {
+			compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe1818000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe1818000 0x800>;
+			status = "disabled";
+
+			uart0: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+				clock-names = "usart";
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(6)>,
+				       <&dma1 AT91_XDMAC_DT_PERID(5)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+		};
+
+		flx1: flexcom@e181c000 {
+			compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe181c000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe181c000 0x800>;
+			status = "disabled";
+
+			i2c1: i2c@600 {
+				compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+				atmel,fifo-size = <32>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(7)>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		flx3: flexcom@e1824000 {
+			compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe1824000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe1824000 0x800>;
+			status = "disabled";
+
+			uart3: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
+				clock-names = "usart";
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(12)>,
+				       <&dma1 AT91_XDMAC_DT_PERID(11)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+		};
+
+		trng: rng@e2010000 {
+			compatible = "microchip,sama7g5-trng", "atmel,at91sam9g45-trng";
+			reg = <0xe2010000 0x100>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 97>;
+			status = "disabled";
+		};
+
+		tdes: crypto@e2014000 {
+			compatible = "atmel,at91sam9g46-tdes";
+			reg = <0xe2014000 0x100>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 96>;
+			clock-names = "tdes_clk";
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(54)>,
+			       <&dma0 AT91_XDMAC_DT_PERID(53)>;
+			dma-names = "tx", "rx";
+		};
+
+		flx4: flexcom@e2018000 {
+			compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe2018000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe2018000 0x800>;
+			status = "disabled";
+
+			uart4: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
+				clock-names = "usart";
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(14)>,
+				       <&dma1 AT91_XDMAC_DT_PERID(13)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+		};
+
+		flx7: flexcom@e2024000 {
+			compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe2024000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe2024000 0x800>;
+			status = "disabled";
+
+			uart7: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
+				clock-names = "usart";
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(20)>,
+				       <&dma1 AT91_XDMAC_DT_PERID(19)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+		};
+
+		gmac0: ethernet@e2800000 {
+			compatible = "microchip,sama7g5-gem";
+			reg = <0xe2800000 0x1000>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_GCK 51>, <&pmc PMC_TYPE_GCK 53>;
+			clock-names = "pclk", "hclk", "tx_clk", "tsu_clk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 51>;
+			assigned-clock-rates = <125000000>;
+			status = "disabled";
+		};
+
+		gmac1: ethernet@e2804000 {
+			compatible = "microchip,sama7g5-emac";
+			reg = <0xe2804000 0x1000>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 52>, <&pmc PMC_TYPE_PERIPHERAL 52>;
+			clock-names = "pclk", "hclk";
+			status = "disabled";
+		};
+
+		dma0: dma-controller@e2808000 {
+			compatible = "microchip,sama7g5-dma";
+			reg = <0xe2808000 0x1000>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
+			clock-names = "dma_clk";
+			status = "disabled";
+		};
+
+		dma1: dma-controller@e280c000 {
+			compatible = "microchip,sama7g5-dma";
+			reg = <0xe280c000 0x1000>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
+			clock-names = "dma_clk";
+			status = "disabled";
+		};
+
+		/* Place dma2 here despite it's address */
+		dma2: dma-controller@e1200000 {
+			compatible = "microchip,sama7g5-dma";
+			reg = <0xe1200000 0x1000>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
+			clock-names = "dma_clk";
+			dma-requests = <0>;
+			status = "disabled";
+		};
+
+		tcb0: timer@e2814000 {
+			compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xe2814000 0x100>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 88>, <&pmc PMC_TYPE_PERIPHERAL 89>, <&pmc PMC_TYPE_PERIPHERAL 90>, <&clk32k 1>;
+			clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+		};
+
+		flx8: flexcom@e2818000 {
+			compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe2818000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 46>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe2818000 0x800>;
+			status = "disabled";
+
+			i2c8: i2c@600 {
+				compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 46>;
+				atmel,fifo-size = <32>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(22)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(21)>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		flx9: flexcom@e281c000 {
+			compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe281c000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe281c000 0x800>;
+			status = "disabled";
+
+			i2c9: i2c@600 {
+				compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
+				atmel,fifo-size = <32>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(24)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(23)>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		flx10: flexcom@e2820000 {
+			compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe2820000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 48>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe2820000 0x800>;
+			status = "disabled";
+
+			i2c10: i2c@600 {
+				compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 48>;
+				atmel,fifo-size = <32>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(26)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(25)>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		flx11: flexcom@e2824000 {
+			compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe2824000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 49>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe2824000 0x800>;
+			status = "disabled";
+
+			spi11: spi@400 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 49>;
+				clock-names = "spi_clk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				atmel,fifo-size = <32>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(28)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(27)>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		uddrc: uddrc@e3800000 {
+			compatible = "microchip,sama7g5-uddrc";
+			reg = <0xe3800000 0x4000>;
+		};
+
+		ddr3phy: ddr3phy@e3804000 {
+			compatible = "microchip,sama7g5-ddr3phy";
+			reg = <0xe3804000 0x1000>;
+		};
+
+		otpc: efuse@e8c00000 {
+			compatible = "microchip,sama7g5-otpc", "syscon";
+			reg = <0xe8c00000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			temperature_calib: calib@1 {
+				reg = <OTP_PKT(1) 76>;
+			};
+		};
+
+		gic: interrupt-controller@e8c11000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0xe8c11000 0x1000>,
+				<0xe8c12000 0x2000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tny_a9260.dts b/arch/arm/boot/dts/microchip/tny_a9260.dts
index ef6d586ce887..f0f2a787d669 100644
--- a/arch/arm/boot/dts/tny_a9260.dts
+++ b/arch/arm/boot/dts/microchip/tny_a9260.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * tny_a9260.dts - Device Tree file for Caloa TNY A9260 board
+ * tny_a9260.dts - Device Tree file for Calao TNY A9260 board
  *
  * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
  */
diff --git a/arch/arm/boot/dts/tny_a9260_common.dtsi b/arch/arm/boot/dts/microchip/tny_a9260_common.dtsi
index 70e5635c78ed..4d4377f51bec 100644
--- a/arch/arm/boot/dts/tny_a9260_common.dtsi
+++ b/arch/arm/boot/dts/microchip/tny_a9260_common.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * tny_a9260_common.dtsi - Device Tree file for Caloa TNY A926x board
+ * tny_a9260_common.dtsi - Device Tree file for Calao TNY A926x board
  *
  * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
  */
diff --git a/arch/arm/boot/dts/tny_a9263.dts b/arch/arm/boot/dts/microchip/tny_a9263.dts
index 62b7d9f9a926..fd8244b56e05 100644
--- a/arch/arm/boot/dts/tny_a9263.dts
+++ b/arch/arm/boot/dts/microchip/tny_a9263.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * usb_a9263.dts - Device Tree file for Caloa USB A9293 board
+ * usb_a9263.dts - Device Tree file for Calao USB A9293 board
  *
  *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
  */
@@ -64,7 +64,7 @@
 				nand@3 {
 					reg = <0x3 0x0 0x800000>;
 					rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>;
-					cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
 					nand-bus-width = <8>;
 					nand-ecc-mode = "soft";
 					nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/tny_a9g20.dts b/arch/arm/boot/dts/microchip/tny_a9g20.dts
index 118d766a1265..cebd5696a2c1 100644
--- a/arch/arm/boot/dts/tny_a9g20.dts
+++ b/arch/arm/boot/dts/microchip/tny_a9g20.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * tny_a9g20.dts - Device Tree file for Caloa TNY A9G20 board
+ * tny_a9g20.dts - Device Tree file for Calao TNY A9G20 board
  *
  * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
  */
diff --git a/arch/arm/boot/dts/microchip/usb_a9260.dts b/arch/arm/boot/dts/microchip/usb_a9260.dts
new file mode 100644
index 000000000000..3b61e7145060
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/usb_a9260.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * usb_a9260.dts - Device Tree file for Calao USB A9260 board
+ *
+ *  Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+/dts-v1/;
+#include "at91sam9260.dtsi"
+#include "usb_a9260_common.dtsi"
+
+/ {
+	model = "Calao USB A9260";
+	compatible = "calao,usb-a9260", "atmel,at91sam9260", "atmel,at91sam9";
+
+	ahb {
+		apb {
+			shdwc: poweroff@fffffd10 {
+				atmel,wakeup-counter = <10>;
+				atmel,wakeup-rtt-timer;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/usb_a9260_common.dtsi b/arch/arm/boot/dts/microchip/usb_a9260_common.dtsi
index 8744b5f6f792..da32c5fdcc47 100644
--- a/arch/arm/boot/dts/usb_a9260_common.dtsi
+++ b/arch/arm/boot/dts/microchip/usb_a9260_common.dtsi
@@ -1,11 +1,16 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
- * usb_a926x.dts - Device Tree file for Caloa USB A926x board
+ * usb_a926x.dts - Device Tree file for Calao USB A926x board
  *
  *  Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
  */
 
 / {
+	chosen {
+		bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs";
+		stdout-path = "serial0:115200n8";
+	};
+
 	clocks {
 		slow_xtal {
 			clock-frequency = <32768>;
@@ -16,6 +21,10 @@
 		};
 	};
 
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
 	ahb {
 		apb {
 			dbgu: serial@fffff200 {
@@ -111,7 +120,7 @@
 			};
 		};
 
-		usb0: ohci@500000 {
+		usb0: usb@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
@@ -122,17 +131,14 @@
 
 		user_led {
 			label = "user_led";
-			gpios = <&pioB 21 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
+			gpios = <&pioB 21 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		user_pb {
+		button-user-pb {
 			label = "user_pb";
 			gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
 			linux,code = <28>;
diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/microchip/usb_a9263.dts
index 8a0cfbfd0c45..8e1a3fb61087 100644
--- a/arch/arm/boot/dts/usb_a9263.dts
+++ b/arch/arm/boot/dts/microchip/usb_a9263.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * usb_a9263.dts - Device Tree file for Caloa USB A9293 board
+ * usb_a9263.dts - Device Tree file for Calao USB A9293 board
  *
  *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
  */
@@ -9,7 +9,7 @@
 
 / {
 	model = "Calao USB A9263";
-	compatible = "atmel,usb-a9263", "atmel,at91sam9263", "atmel,at91sam9";
+	compatible = "calao,usb-a9263", "atmel,at91sam9263", "atmel,at91sam9";
 
 	chosen {
 		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
@@ -58,16 +58,16 @@
 			};
 
 			spi0: spi@fffa4000 {
-				cs-gpios = <&pioB 15 GPIO_ACTIVE_HIGH>;
+				cs-gpios = <&pioA 5 GPIO_ACTIVE_LOW>;
 				status = "okay";
-				mtd_dataflash@0 {
+				flash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					reg = <0>;
 					spi-max-frequency = <15000000>;
 				};
 			};
 
-			shdwc@fffffd10 {
+			poweroff@fffffd10 {
 				atmel,wakeup-counter = <10>;
 				atmel,wakeup-rtt-timer;
 			};
@@ -84,7 +84,7 @@
 				nand@3 {
 					reg = <0x3 0x0 0x800000>;
 					rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>;
-					cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
 					nand-bus-width = <8>;
 					nand-ecc-mode = "soft";
 					nand-on-flash-bbt;
@@ -139,7 +139,7 @@
 			};
 		};
 
-		usb0: ohci@a00000 {
+		usb0: usb@a00000 {
 			num-ports = <2>;
 			status = "okay";
 		};
@@ -151,16 +151,13 @@
 		user_led {
 			label = "user_led";
 			gpios = <&pioB 21 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
 		};
 	};
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		user_pb {
+		button-user-pb {
 			label = "user_pb";
 			gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
 			linux,code = <28>;
diff --git a/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi b/arch/arm/boot/dts/microchip/usb_a9g20-dab-mmx.dtsi
index 08d58081201a..5b1d80c0ab26 100644
--- a/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi
+++ b/arch/arm/boot/dts/microchip/usb_a9g20-dab-mmx.dtsi
@@ -65,28 +65,26 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		user_pb1 {
+		button-user-pb1 {
 			label = "user_pb1";
 			gpios = <&pioB 25 GPIO_ACTIVE_LOW>;
 			linux,code = <0x100>;
 		};
 
-		user_pb2 {
+		button-user-pb2 {
 			label = "user_pb2";
 			gpios = <&pioB 13 GPIO_ACTIVE_LOW>;
 			linux,code = <0x101>;
 		};
 
-		user_pb3 {
+		button-user-pb3 {
 			label = "user_pb3";
 			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
 			linux,code = <0x102>;
 		};
 
-		user_pb4 {
+		button-user-pb4 {
 			label = "user_pb4";
 			gpios = <&pioC 9 GPIO_ACTIVE_LOW>;
 			linux,code = <0x103>;
diff --git a/arch/arm/boot/dts/microchip/usb_a9g20.dts b/arch/arm/boot/dts/microchip/usb_a9g20.dts
new file mode 100644
index 000000000000..555291cd30b3
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/usb_a9g20.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * usb_a9g20.dts - Device Tree file for Calao USB A9G20 board
+ *
+ *  Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+/dts-v1/;
+#include "at91sam9g20.dtsi"
+#include "usb_a9260_common.dtsi"
+
+/ {
+	model = "Calao USB A9G20";
+	compatible = "calao,usb-a9g20", "atmel,at91sam9g20", "atmel,at91sam9";
+};
+
+&spi0 {
+	cs-gpios = <&pioC 11 GPIO_ACTIVE_LOW>;
+	status = "okay";
+	/* TODO: Some revisions might have a dataflash here instead of an EEPROM */
+	eeprom@0 {
+		compatible = "st,m95640", "atmel,at25";
+		reg = <0>;
+		spi-max-frequency = <2000000>;
+		size = <8192>;
+		pagesize = <32>;
+		address-width = <16>;
+	};
+};
diff --git a/arch/arm/boot/dts/microchip/usb_a9g20_lpw.dts b/arch/arm/boot/dts/microchip/usb_a9g20_lpw.dts
new file mode 100644
index 000000000000..2eda00477bc5
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/usb_a9g20_lpw.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * usb_a9g20_lpw.dts - Device Tree file for Calao USB A9G20 Low Power board
+ *
+ *  Copyright (C) 2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ */
+/dts-v1/;
+#include "at91sam9g20.dtsi"
+#include "usb_a9260_common.dtsi"
+
+/ {
+	model = "Calao USB A9G20 Low Power";
+	compatible = "calao,usb-a9g20-lpw", "calao,usb-a9g20", "atmel,at91sam9g20", "atmel,at91sam9";
+
+	ahb {
+		apb {
+			spi1: spi@fffcc000 {
+				cs-gpios = <&pioB 3 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+				mmc@0 {
+					compatible = "mmc-spi-slot";
+					reg = <0>;
+					voltage-ranges = <3200 3400>;
+					spi-max-frequency = <25000000>;
+					interrupt-parent = <&pioC>;
+					interrupts = <4 IRQ_TYPE_EDGE_BOTH>;
+				};
+			};
+		};
+	};
+
+	i2c-gpio-0 {
+		rtc@56 {
+			compatible = "microcrystal,rv3029";
+			reg = <0x56>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi
deleted file mode 100644
index a4423ff0df39..000000000000
--- a/arch/arm/boot/dts/motorola-mapphone-common.dtsi
+++ /dev/null
@@ -1,737 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include "omap443x.dtsi"
-#include "motorola-cpcap-mapphone.dtsi"
-
-/ {
-	chosen {
-		stdout-path = &uart3;
-	};
-
-	aliases {
-		display0 = &lcd0;
-		display1 = &hdmi0;
-	};
-
-	/*
-	 * We seem to have only 1021 MB accessible, 1021 - 1022 is locked,
-	 * then 1023 - 1024 seems to contain mbm.
-	 */
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x3fd00000>;	/* 1021 MB */
-	};
-
-	/* Poweroff GPIO probably connected to CPCAP */
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&poweroff_gpio>;
-		pinctrl-names = "default";
-		gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;	/* gpio50 */
-	};
-
-	hdmi0: connector {
-		compatible = "hdmi-connector";
-		pinctrl-0 = <&hdmi_hpd_gpio>;
-		pinctrl-names = "default";
-		label = "hdmi";
-		type = "d";
-
-		hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;	/* gpio63 */
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&hdmi_out>;
-			};
-		};
-	};
-
-	/*
-	 * HDMI 5V regulator probably sourced from battery. Let's keep
-	 * keep this as always enabled for HDMI to work until we've
-	 * figured what the encoder chip is.
-	 */
-	hdmi_regulator: regulator-hdmi {
-		compatible = "regulator-fixed";
-		regulator-name = "hdmi";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio2 27 GPIO_ACTIVE_HIGH>;	/* gpio59 */
-		enable-active-high;
-		regulator-always-on;
-	};
-
-	/* FS USB Host PHY on port 1 for mdm6600 */
-	fsusb1_phy: usb-phy@1 {
-		compatible = "motorola,mapphone-mdm6600";
-		pinctrl-0 = <&usb_mdm6600_pins>;
-		pinctrl-names = "default";
-		enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;     /* gpio_95 */
-		power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;	/* gpio_54 */
-		reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;	/* gpio_49 */
-		/* mode: gpio_148 gpio_149 */
-		motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>,
-				      <&gpio5 21 GPIO_ACTIVE_HIGH>;
-		/* cmd: gpio_103 gpio_104 gpio_142 */
-		motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>,
-				     <&gpio4 8 GPIO_ACTIVE_HIGH>,
-				     <&gpio5 14 GPIO_ACTIVE_HIGH>;
-		/* status: gpio_52 gpio_53 gpio_55 */
-		motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>,
-					<&gpio2 21 GPIO_ACTIVE_HIGH>,
-					<&gpio2 23 GPIO_ACTIVE_HIGH>;
-		#phy-cells = <0>;
-	};
-
-	/* HS USB host TLL nop-phy on port 2 for w3glte */
-	hsusb2_phy: usb-phy@2 {
-		compatible = "usb-nop-xceiv";
-		#phy-cells = <0>;
-	};
-
-	/* LCD regulator from sw5 source */
-	lcd_regulator: regulator-lcd {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd";
-		regulator-min-microvolt = <5050000>;
-		regulator-max-microvolt = <5050000>;
-		gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>;	/* gpio96 */
-		enable-active-high;
-		vin-supply = <&sw5>;
-	};
-
-	/* This is probably coming straight from the battery.. */
-	wl12xx_vmmc: regulator-wl12xx {
-		compatible = "regulator-fixed";
-		regulator-name = "vwl1271";
-		regulator-min-microvolt = <1650000>;
-		regulator-max-microvolt = <1650000>;
-		gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;	/* gpio94 */
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-
-	soundcard {
-		compatible = "audio-graph-card";
-		label = "Mapphone Audio";
-
-		widgets =
-			"Speaker", "Earpiece",
-			"Speaker", "Loudspeaker",
-			"Headphone", "Headphone Jack",
-			"Microphone", "Internal Mic";
-
-		routing =
-			"Earpiece", "EP",
-			"Loudspeaker", "SPKR",
-			"Headphone Jack", "HSL",
-			"Headphone Jack", "HSR",
-			"MICR", "Internal Mic";
-
-		dais = <&mcbsp2_port>, <&mcbsp3_port>;
-	};
-
-	pwm8: dmtimer-pwm-8 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&vibrator_direction_pin>;
-
-		compatible = "ti,omap-dmtimer-pwm";
-		#pwm-cells = <3>;
-		ti,timers = <&timer8>;
-		ti,clock-source = <0x01>;
-	};
-
-	pwm9: dmtimer-pwm-9 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&vibrator_enable_pin>;
-
-		compatible = "ti,omap-dmtimer-pwm";
-		#pwm-cells = <3>;
-		ti,timers = <&timer9>;
-		ti,clock-source = <0x01>;
-	};
-
-	vibrator {
-		compatible = "pwm-vibrator";
-		pwms = <&pwm9 0 10000000 0>, <&pwm8 0 10000000 0>;
-		pwm-names = "enable", "direction";
-		direction-duty-cycle-ns = <10000000>;
-	};
-
-	backlight: backlight {
-		compatible = "led-backlight";
-
-		leds = <&backlight_led>;
-		brightness-levels = <31 63 95 127 159 191 223 255>;
-		default-brightness-level = <6>;
-	};
-};
-
-&cpu_thermal {
-	polling-delay = <10000>; /* milliseconds */
-};
-
-&cpu_alert0 {
-        temperature = <80000>; /* millicelsius */
-};
-
-&cpu0 {
-        /*
-	 * Note that the 1.2GiHz mode is enabled for all SoC variants for
-	 * the Motorola Android Linux v3.0.8 based kernel.
-	 */
-        operating-points = <
-	        /* kHz    uV */
-	        300000  1025000
-	        600000  1200000
-	        800000  1313000
-	        1008000 1375000
-		1200000 1375000
-        >;
-};
-
-&dss {
-	status = "okay";
-};
-
-&dsi1 {
-	status = "okay";
-	vdd-supply = <&vcsi>;
-
-	port {
-		dsi1_out_ep: endpoint {
-			remote-endpoint = <&lcd0_in>;
-			lanes = <0 1 2 3 4 5>;
-		};
-	};
-
-	lcd0: panel@0 {
-		compatible = "motorola,droid4-panel", "panel-dsi-cm";
-		reg = <0>;
-		label = "lcd0";
-		vddi-supply = <&lcd_regulator>;
-		reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;	/* gpio101 */
-
-		backlight = <&backlight>;
-
-		width-mm = <50>;
-		height-mm = <89>;
-		rotation = <90>;
-
-		panel-timing {
-			clock-frequency = <0>;		/* Calculated by dsi */
-
-			hback-porch = <2>;
-			hactive = <540>;
-			hfront-porch = <0>;
-			hsync-len = <2>;
-
-			vback-porch = <1>;
-			vactive = <960>;
-			vfront-porch = <0>;
-			vsync-len = <1>;
-
-			hsync-active = <0>;
-			vsync-active = <0>;
-			de-active = <1>;
-			pixelclk-active = <1>;
-		};
-
-		port {
-			lcd0_in: endpoint {
-				remote-endpoint = <&dsi1_out_ep>;
-			};
-		};
-	};
-};
-
-&hdmi {
-	status = "okay";
-	pinctrl-0 = <&dss_hdmi_pins>;
-	pinctrl-names = "default";
-	vdda-supply = <&vdac>;
-
-	port {
-		hdmi_out: endpoint {
-			remote-endpoint = <&hdmi_connector_in>;
-			lanes = <1 0 3 2 5 4 7 6>;
-		};
-	};
-};
-
-/* Battery NVRAM on 1-wire handled by w1_ds250x driver */
-&hdqw1w {
-	pinctrl-0 = <&hdq_pins>;
-	pinctrl-names = "default";
-	ti,mode = "1w";
-};
-
-&i2c1 {
-	tmp105@48 {
-		compatible = "ti,tmp105";
-		reg = <0x48>;
-		pinctrl-0 = <&tmp105_irq>;
-		pinctrl-names = "default";
-		/* kpd_row0.gpio_178 */
-		interrupts-extended = <&gpio6 18 IRQ_TYPE_EDGE_FALLING
-				       &omap4_pmx_core 0x14e>;
-		interrupt-names = "irq", "wakeup";
-		wakeup-source;
-	};
-};
-
-&mmc1 {
-	vmmc-supply = <&vwlan2>;
-	bus-width = <4>;
-	cd-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>;	/* gpio176 */
-};
-
-&mmc2 {
-	vmmc-supply = <&vsdio>;
-	bus-width = <8>;
-	ti,non-removable;
-};
-
-&mmc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc3_pins>;
-	vmmc-supply = <&wl12xx_vmmc>;
-	/* uart2_tx.sdmmc3_dat1 pad as wakeirq */
-	interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
-			       &omap4_pmx_core 0xde>;
-	interrupt-names = "irq", "wakeup";
-	non-removable;
-	bus-width = <4>;
-	cap-power-off-card;
-	keep-power-in-suspend;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1285", "ti,wl1283";
-		reg = <2>;
-		/* gpio_100 with gpmc_wait2 pad as wakeirq */
-		interrupts-extended = <&gpio4 4 IRQ_TYPE_LEVEL_HIGH>,
-				      <&omap4_pmx_core 0x4e>;
-		interrupt-names = "irq", "wakeup";
-		ref-clock-frequency = <26000000>;
-		tcxo-clock-frequency = <26000000>;
-	};
-};
-
-&i2c2 {
-	touchscreen@4a {
-		compatible = "atmel,maxtouch";
-		reg = <0x4a>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&touchscreen_pins>;
-
-		reset-gpios = <&gpio6 13 GPIO_ACTIVE_LOW>; /* gpio173 */
-
-		/* gpio_183 with sys_nirq2 pad as wakeup */
-		interrupts-extended = <&gpio6 23 IRQ_TYPE_LEVEL_LOW>,
-				      <&omap4_pmx_core 0x160>;
-		interrupt-names = "irq", "wakeup";
-		wakeup-source;
-	};
-
-	isl29030@44 {
-		compatible = "isil,isl29030";
-		reg = <0x44>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&als_proximity_pins>;
-
-		interrupt-parent = <&gpio6>;
-		interrupts = <17 IRQ_TYPE_LEVEL_LOW>; /* gpio177 */
-	};
-};
-
-&omap4_pmx_core {
-
-	/* hdmi_hpd.gpio_63 */
-	hdmi_hpd_gpio: pinmux_hdmi_hpd_pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3)
-		>;
-	};
-
-	hdq_pins: pinmux_hdq_pins {
-		pinctrl-single,pins = <
-		/* 0x4a100120 hdq_sio.hdq_sio aa27 */
-		OMAP4_IOPAD(0x120, PIN_INPUT | MUX_MODE0)
-		>;
-	};
-
-	/* hdmi_cec.hdmi_cec, hdmi_scl.hdmi_scl, hdmi_sda.hdmi_sda */
-	dss_hdmi_pins: pinmux_dss_hdmi_pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)
-		OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0)
-		OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0)
-		>;
-	};
-
-	/*
-	 * Android uses PIN_OFF_INPUT_PULLDOWN | PIN_INPUT_PULLUP | MUX_MODE3
-	 * for gpio_100, but the internal pull makes wlan flakey on some
-	 * devices. Off mode value should be tested if we have off mode working
-	 * later on.
-	 */
-	mmc3_pins: pinmux_mmc3_pins {
-		pinctrl-single,pins = <
-		/* 0x4a10008e gpmc_wait2.gpio_100 d23 */
-		OMAP4_IOPAD(0x08e, PIN_INPUT | MUX_MODE3)
-
-		/* 0x4a100102 abe_mcbsp1_dx.sdmmc3_dat2 ab25 */
-		OMAP4_IOPAD(0x102, PIN_INPUT_PULLUP | MUX_MODE1)
-
-		/* 0x4a100104 abe_mcbsp1_fsx.sdmmc3_dat3 ac27 */
-		OMAP4_IOPAD(0x104, PIN_INPUT_PULLUP | MUX_MODE1)
-
-		/* 0x4a100118 uart2_cts.sdmmc3_clk ab26 */
-		OMAP4_IOPAD(0x118, PIN_INPUT | MUX_MODE1)
-
-		/* 0x4a10011a uart2_rts.sdmmc3_cmd ab27 */
-		OMAP4_IOPAD(0x11a, PIN_INPUT_PULLUP | MUX_MODE1)
-
-		/* 0x4a10011c uart2_rx.sdmmc3_dat0 aa25 */
-		OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE1)
-
-		/* 0x4a10011e uart2_tx.sdmmc3_dat1 aa26 */
-		OMAP4_IOPAD(0x11e, PIN_INPUT_PULLUP | MUX_MODE1)
-		>;
-	};
-
-	/* gpmc_ncs0.gpio_50 */
-	poweroff_gpio: pinmux_poweroff_pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x074, PIN_OUTPUT_PULLUP | MUX_MODE3)
-		>;
-	};
-
-	/* kpd_row0.gpio_178 */
-	tmp105_irq: pinmux_tmp105_irq {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x18e, PIN_INPUT_PULLUP | MUX_MODE3)
-		>;
-	};
-
-	usb_gpio_mux_sel1: pinmux_usb_gpio_mux_sel1_pins {
-		/* gpio_60 */
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3)
-		>;
-	};
-
-	touchscreen_pins: pinmux_touchscreen_pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3)
-		OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3)
-		>;
-	};
-
-	als_proximity_pins: pinmux_als_proximity_pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x18c, PIN_INPUT_PULLUP | MUX_MODE3)
-		>;
-	};
-
-	usb_mdm6600_pins: pinmux_usb_mdm6600_pins {
-		pinctrl-single,pins = <
-		/* enable 0x4a1000d8 usbb1_ulpitll_dat7.gpio_95 ag16 */
-		OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3)
-
-		/* power 0x4a10007c gpmc_nwp.gpio_54 c25 */
-		OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)
-
-		/* reset 0x4a100072 gpmc_a25.gpio_49 d20 */
-		OMAP4_IOPAD(0x072, PIN_OUTPUT | MUX_MODE3)
-
-		/* mode0/bpwake 0x4a10014e sdmmc5_dat1.gpio_148 af4 */
-		OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3)
-
-		/* mode1/apwake 0x4a100150 sdmmc5_dat2.gpio_149 ag3 */
-		OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3)
-
-		/* status0 0x4a10007e gpmc_clk.gpio_55 b22 */
-		OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3)
-
-		/* status1 0x4a10007a gpmc_ncs3.gpio_53 c22 */
-		OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)
-
-		/* status2 0x4a100078 gpmc_ncs2.gpio_52 d21 */
-		OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)
-
-		/* cmd0 0x4a100094 gpmc_ncs6.gpio_103 c24 */
-		OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3)
-
-		/* cmd1 0x4a100096 gpmc_ncs7.gpio_104 d24 */
-		OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3)
-
-		/* cmd2 0x4a100142 uart3_rts_sd.gpio_142 f28 */
-		OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3)
-		>;
-	};
-
-	usb_ulpi_pins: pinmux_usb_ulpi_pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x196, MUX_MODE7)
-		OMAP4_IOPAD(0x198, MUX_MODE7)
-		OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE0)
-		OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE0)
-		OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE0)
-		OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE0)
-		OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE0)
-		OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE0)
-		OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE0)
-		OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE0)
-		OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE0)
-		OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE0)
-		OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE0)
-		OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE0)
-		>;
-	};
-
-	/* usb0_otg_dp and usb0_otg_dm */
-	usb_utmi_pins: pinmux_usb_utmi_pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x196, PIN_INPUT | MUX_MODE0)
-		OMAP4_IOPAD(0x198, PIN_INPUT | MUX_MODE0)
-		OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7)
-		>;
-	};
-
-	/*
-	 * Note that the v3.0.8 stock userspace dynamically remuxes uart1
-	 * rts pin probably for PM purposes to PIN_INPUT_PULLUP | MUX_MODE7
-	 * when not used. If needed, we can add rts pin remux later based
-	 * on power measurements.
-	 */
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-		/* 0x4a10013c mcspi1_cs2.uart1_cts ag23 */
-		OMAP4_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE1)
-
-		/* 0x4a10013e mcspi1_cs3.uart1_rts ah23 */
-		OMAP4_IOPAD(0x13e, MUX_MODE1)
-
-		/* 0x4a100140 uart3_cts_rctx.uart1_tx f27 */
-		OMAP4_IOPAD(0x140, PIN_OUTPUT | MUX_MODE1)
-
-		/* 0x4a1001ca dpm_emu14.uart1_rx aa3 */
-		OMAP4_IOPAD(0x1ca, PIN_INPUT_PULLUP | MUX_MODE2)
-		>;
-	};
-
-	/* uart3_tx_irtx and uart3_rx_irrx */
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x196, MUX_MODE7)
-		OMAP4_IOPAD(0x198, MUX_MODE7)
-		OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1ba, MUX_MODE2)
-		OMAP4_IOPAD(0x1bc, PIN_INPUT | MUX_MODE2)
-		OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7)
-		OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7)
-		>;
-	};
-
-	uart4_pins: pinmux_uart4_pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0)		/* uart4_rx */
-		OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0)		/* uart4_tx */
-		OMAP4_IOPAD(0x110, PIN_INPUT_PULLUP | MUX_MODE5)	/* uart4_cts */
-		OMAP4_IOPAD(0x112, PIN_OUTPUT_PULLUP | MUX_MODE5)	/* uart4_rts */
-		>;
-	};
-
-	mcbsp2_pins: pinmux_mcbsp2_pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0)	/* abe_mcbsp2_clkx */
-		OMAP4_IOPAD(0x0f8, PIN_INPUT | MUX_MODE0)	/* abe_mcbsp2_dr */
-		OMAP4_IOPAD(0x0fa, PIN_OUTPUT | MUX_MODE0)	/* abe_mcbsp2_dx */
-		OMAP4_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0)	/* abe_mcbsp2_fsx */
-		>;
-	};
-
-	mcbsp3_pins: pinmux_mcbsp3_pins {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x106, PIN_INPUT | MUX_MODE1)	/* abe_mcbsp3_dr */
-		OMAP4_IOPAD(0x108, PIN_OUTPUT | MUX_MODE1)	/* abe_mcbsp3_dx */
-		OMAP4_IOPAD(0x10a, PIN_INPUT | MUX_MODE1)	/* abe_mcbsp3_clkx */
-		OMAP4_IOPAD(0x10c, PIN_INPUT | MUX_MODE1)	/* abe_mcbsp3_fsx */
-		>;
-	};
-
-	vibrator_direction_pin: pinmux_vibrator_direction_pin {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1)	/* dmtimer8_pwm_evt (gpio_27) */
-		>;
-	};
-
-	vibrator_enable_pin: pinmux_vibrator_enable_pin {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1)	/* dmtimer9_pwm_evt (gpio_28) */
-		>;
-	};
-};
-
-&omap4_pmx_wkup {
-	usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins {
-		/* gpio_wk0 */
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
-		>;
-	};
-};
-
-/* RNG is used by secure mode and not accessible */
-&rng_target {
-	status = "disabled";
-};
-
-/* Configure pwm clock source for timers 8 & 9 */
-&timer8 {
-	assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>;
-	assigned-clock-parents = <&sys_clkin_ck>;
-};
-
-&timer9 {
-	assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>;
-	assigned-clock-parents = <&sys_clkin_ck>;
-};
-
-/*
- * The uart1 port is wired to mdm6600 with rts and cts. The modem uses gpio_149
- * for wake-up events for both the USB PHY and the UART. We can use gpio_149
- * pad as the shared wakeirq for the UART rather than the RX or CTS pad as we
- * have gpio_149 trigger before the UART transfer starts.
- */
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-	interrupts-extended = <&wakeupgen GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH
-			       &omap4_pmx_core 0x110>;
-	uart-has-rtscts;
-	current-speed = <115200>;
-};
-
-&uart3 {
-	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
-			       &omap4_pmx_core 0x17c>;
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart4_pins>;
-
-	bluetooth {
-		compatible = "ti,wl1285-st";
-		enable-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>; /* gpio 174 */
-		max-speed = <3686400>;
-	};
-};
-
-&usbhsohci {
-	phys = <&fsusb1_phy>;
-	phy-names = "usb";
-};
-
-&usbhsehci {
-	phys = <&hsusb2_phy>;
-};
-
-&usbhshost {
-	port1-mode = "ohci-phy-4pin-dpdm";
-	port2-mode = "ehci-tll";
-};
-
-/* Internal UTMI+ PHY used for OTG, CPCAP ULPI PHY for detection and charger */
-&usb_otg_hs {
-	interface-type = <1>;
-	mode = <3>;
-
-	/*
-	 * Max 300 mA steps based on similar PMIC MC13783UG.pdf "Table 10-4.
-	 * VBUS Regulator Main Characteristics". Binding uses 2 mA units.
-	 */
-	power = <150>;
-};
-
-&i2c4 {
-	ak8975: magnetometer@c {
-		compatible = "asahi-kasei,ak8975";
-		reg = <0x0c>;
-
-		vdd-supply = <&vhvio>;
-
-		interrupt-parent = <&gpio6>;
-		interrupts = <15 IRQ_TYPE_EDGE_RISING>; /* gpio175 */
-
-		rotation-matrix = "-1", "0", "0",
-				  "0", "1", "0",
-				  "0", "0", "-1";
-
-	};
-};
-
-&mcbsp2 {
-	#sound-dai-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp2_pins>;
-	status = "okay";
-
-	mcbsp2_port: port {
-		cpu_dai2: endpoint {
-			dai-format = "i2s";
-			remote-endpoint = <&cpcap_audio_codec0>;
-			frame-master = <&cpcap_audio_codec0>;
-			bitclock-master = <&cpcap_audio_codec0>;
-		};
-	};
-};
-
-&mcbsp3 {
-	#sound-dai-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp3_pins>;
-	status = "okay";
-
-	mcbsp3_port: port {
-		cpu_dai3: endpoint {
-			dai-format = "dsp_a";
-			frame-master = <&cpcap_audio_codec1>;
-			bitclock-master = <&cpcap_audio_codec1>;
-			remote-endpoint = <&cpcap_audio_codec1>;
-		};
-	};
-};
-
-&cpcap_audio_codec0 {
-	remote-endpoint = <&cpu_dai2>;
-};
-
-&cpcap_audio_codec1 {
-	remote-endpoint = <&cpu_dai3>;
-};
diff --git a/arch/arm/boot/dts/moxa/Makefile b/arch/arm/boot/dts/moxa/Makefile
new file mode 100644
index 000000000000..d61ce8d4e732
--- /dev/null
+++ b/arch/arm/boot/dts/moxa/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_MOXART) += \
+	moxart-uc7112lx.dtb
diff --git a/arch/arm/boot/dts/moxart-uc7112lx.dts b/arch/arm/boot/dts/moxa/moxart-uc7112lx.dts
index eb5291b0ee3a..e07b807b4cec 100644
--- a/arch/arm/boot/dts/moxart-uc7112lx.dts
+++ b/arch/arm/boot/dts/moxa/moxart-uc7112lx.dts
@@ -79,7 +79,7 @@
 	clocks = <&ref12>;
 };
 
-&sdhci {
+&mmc {
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/moxart.dtsi b/arch/arm/boot/dts/moxa/moxart.dtsi
index f5f070a87482..11cbea5b94d2 100644
--- a/arch/arm/boot/dts/moxart.dtsi
+++ b/arch/arm/boot/dts/moxa/moxart.dtsi
@@ -93,8 +93,8 @@
 			clock-names = "PCLK";
 		};
 
-		sdhci: sdhci@98e00000 {
-			compatible = "moxa,moxart-sdhci";
+		mmc: mmc@98e00000 {
+			compatible = "moxa,moxart-mmc";
 			reg = <0x98e00000 0x5C>;
 			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_apb>;
@@ -138,7 +138,7 @@
 			status = "disabled";
 		};
 
-		uart0: uart@98200000 {
+		uart0: serial@98200000 {
 			compatible = "ns16550a";
 			reg = <0x98200000 0x20>;
 			interrupts = <31 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/mstar-infinity.dtsi b/arch/arm/boot/dts/mstar-infinity.dtsi
deleted file mode 100644
index 0bee517797f4..000000000000
--- a/arch/arm/boot/dts/mstar-infinity.dtsi
+++ /dev/null
@@ -1,18 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2020 thingy.jp.
- * Author: Daniel Palmer <daniel@thingy.jp>
- */
-
-#include "mstar-v7.dtsi"
-
-#include <dt-bindings/gpio/msc313-gpio.h>
-
-&imi {
-	reg = <0xa0000000 0x16000>;
-};
-
-&gpio {
-	compatible = "mstar,msc313-gpio";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/mstar-infinity2m.dtsi b/arch/arm/boot/dts/mstar-infinity2m.dtsi
deleted file mode 100644
index 6d4d1d224e96..000000000000
--- a/arch/arm/boot/dts/mstar-infinity2m.dtsi
+++ /dev/null
@@ -1,22 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2020 thingy.jp.
- * Author: Daniel Palmer <daniel@thingy.jp>
- */
-
-#include "mstar-infinity.dtsi"
-
-&cpus {
-	cpu1: cpu@1 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a7";
-		reg = <0x1>;
-	};
-};
-
-&riu {
-	smpctrl: smpctrl@204000 {
-		reg = <0x204000 0x200>;
-		status = "disabled";
-	};
-};
diff --git a/arch/arm/boot/dts/mstar-infinity3.dtsi b/arch/arm/boot/dts/mstar-infinity3.dtsi
deleted file mode 100644
index 9857e2a9934d..000000000000
--- a/arch/arm/boot/dts/mstar-infinity3.dtsi
+++ /dev/null
@@ -1,11 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2020 thingy.jp.
- * Author: Daniel Palmer <daniel@thingy.jp>
- */
-
-#include "mstar-infinity.dtsi"
-
-&imi {
-	reg = <0xa0000000 0x20000>;
-};
diff --git a/arch/arm/boot/dts/mt7623a.dtsi b/arch/arm/boot/dts/mt7623a.dtsi
deleted file mode 100644
index 0735a1fb8ad9..000000000000
--- a/arch/arm/boot/dts/mt7623a.dtsi
+++ /dev/null
@@ -1,44 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2017-2018 MediaTek Inc.
- * Author: Sean Wang <sean.wang@mediatek.com>
- *
- */
-
-/dts-v1/;
-#include <dt-bindings/power/mt7623a-power.h>
-#include "mt7623.dtsi"
-
-&afe {
-	power-domains = <&scpsys MT7623A_POWER_DOMAIN_IFR_MSC>;
-};
-
-&crypto {
-	power-domains = <&scpsys MT7623A_POWER_DOMAIN_ETH>;
-};
-
-&eth {
-	power-domains = <&scpsys MT7623A_POWER_DOMAIN_ETH>;
-};
-
-&nandc {
-	power-domains = <&scpsys MT7623A_POWER_DOMAIN_IFR_MSC>;
-};
-
-&pcie {
-	power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>;
-};
-
-&scpsys {
-	compatible = "mediatek,mt7623a-scpsys";
-	clocks = <&topckgen CLK_TOP_ETHIF_SEL>;
-	clock-names = "ethif";
-};
-
-&usb1 {
-	power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>;
-};
-
-&usb2 {
-	power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>;
-};
diff --git a/arch/arm/boot/dts/mxs-pinfunc.h b/arch/arm/boot/dts/mxs-pinfunc.h
deleted file mode 100644
index c6da987b20cb..000000000000
--- a/arch/arm/boot/dts/mxs-pinfunc.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * Header providing constants for i.MX28 pinctrl bindings.
- *
- * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#ifndef __DT_BINDINGS_MXS_PINCTRL_H__
-#define __DT_BINDINGS_MXS_PINCTRL_H__
-
-/* fsl,drive-strength property */
-#define MXS_DRIVE_4mA		0
-#define MXS_DRIVE_8mA		1
-#define MXS_DRIVE_12mA		2
-#define MXS_DRIVE_16mA		3
-
-/* fsl,voltage property */
-#define MXS_VOLTAGE_LOW		0
-#define MXS_VOLTAGE_HIGH	1
-
-/* fsl,pull-up property */
-#define MXS_PULL_DISABLE	0
-#define MXS_PULL_ENABLE		1
-
-#endif /* __DT_BINDINGS_MXS_PINCTRL_H__ */
diff --git a/arch/arm/boot/dts/nspire-clp.dts b/arch/arm/boot/dts/nspire-clp.dts
deleted file mode 100644
index f52f38c61588..000000000000
--- a/arch/arm/boot/dts/nspire-clp.dts
+++ /dev/null
@@ -1,41 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/boot/nspire-clp.dts
- *
- *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
- */
-/dts-v1/;
-
-/include/ "nspire-classic.dtsi"
-
-&keypad {
-	linux,keymap = <
-	0x0000001c 	0x0001001c 	0x00020039
-	0x0004002c 	0x00050034 	0x00060015
-	0x0007000b 	0x0008002d 	0x01000033
-	0x0101004e 	0x01020011 	0x01030004
-	0x0104002f 	0x01050003 	0x01060016
-	0x01070002 	0x01080014 	0x02000062
-	0x0201000c 	0x0202001f 	0x02030007
-	0x02040013 	0x02050006 	0x02060010
-	0x02070005 	0x02080019 	0x03000027
-	0x03010037 	0x03020018 	0x0303000a
-	0x03040031 	0x03050009 	0x03060032
-	0x03070008 	0x03080026 	0x04000028
-	0x04010035 	0x04020025 	0x04040024
-	0x04060017 	0x04080023 	0x05000028
-	0x05020022 	0x0503001b 	0x05040021
-	0x0505001a 	0x05060012 	0x0507006f
-	0x05080020 	0x0509002a 	0x0601001c
-	0x0602002e 	0x06030068 	0x06040030
-	0x0605006d 	0x0606001e 	0x06070001
-	0x0608002b 	0x0609000f 	0x07000067
-	0x0702006a 	0x0704006c 	0x07060069
-	0x0707000e 	0x0708001d 	0x070a000d
-	>;
-};
-
-/ {
-	model = "TI-NSPIRE Clickpad";
-	compatible = "ti,nspire-clp";
-};
diff --git a/arch/arm/boot/dts/nspire-cx.dts b/arch/arm/boot/dts/nspire-cx.dts
deleted file mode 100644
index 0c16b04e2744..000000000000
--- a/arch/arm/boot/dts/nspire-cx.dts
+++ /dev/null
@@ -1,125 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/boot/nspire-cx.dts
- *
- *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
- */
-/dts-v1/;
-
-/include/ "nspire.dtsi"
-
-&lcd {
-	port {
-		clcd_pads: endpoint {
-			remote-endpoint = <&panel_in>;
-		};
-	};
-};
-
-&fast_timer {
-	/* compatible = "arm,sp804", "arm,primecell"; */
-};
-
-&uart {
-	compatible = "arm,pl011", "arm,primecell";
-
-	clocks = <&uart_clk>, <&apb_pclk>;
-	clock-names = "uart_clk", "apb_pclk";
-};
-
-&timer0 {
-	compatible = "arm,sp804", "arm,primecell";
-};
-
-&timer1 {
-	compatible = "arm,sp804", "arm,primecell";
-};
-
-&base_clk {
-	compatible = "lsi,nspire-cx-clock";
-};
-
-&ahb_clk {
-	compatible = "lsi,nspire-cx-ahb-divider";
-};
-
-&keypad {
-	linux,keymap = <
-	0x0000001c 	0x0001001c 	0x00040039
-	0x0005002c 	0x00060015 	0x0007000b
-	0x0008000f 	0x0100002d 	0x01010011
-	0x0102002f 	0x01030004 	0x01040016
-	0x01050014 	0x0106001f 	0x01070002
-	0x010a006a 	0x02000013 	0x02010010
-	0x02020019 	0x02030007 	0x02040018
-	0x02050031 	0x02060032 	0x02070005
-	0x02080028 	0x0209006c 	0x03000026
-	0x03010025 	0x03020024 	0x0303000a
-	0x03040017 	0x03050023 	0x03060022
-	0x03070008 	0x03080035 	0x03090069
-	0x04000021 	0x04010012 	0x04020020
-	0x0404002e 	0x04050030 	0x0406001e
-	0x0407000d 	0x04080037 	0x04090067
-	0x05010038 	0x0502000c 	0x0503001b
-	0x05040034 	0x0505001a 	0x05060006
-	0x05080027 	0x0509000e 	0x050a006f
-	0x0600002b 	0x0602004e 	0x06030068
-	0x06040003 	0x0605006d 	0x06060009
-	0x06070001 	0x0609000f 	0x0708002a
-	0x0709001d 	0x070a0033 	>;
-};
-
-&vbus_reg {
-	gpio = <&gpio 2 0>;
-};
-
-/ {
-	model = "TI-NSPIRE CX";
-	compatible = "ti,nspire-cx";
-
-	memory {
-		device_type = "memory";
-		reg = <0x10000000 0x4000000>; /* 64 MB */
-	};
-
-	uart_clk: uart_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <12000000>;
-	};
-
-	ahb {
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		intc: interrupt-controller@DC000000 {
-			compatible = "arm,pl190-vic";
-			interrupt-controller;
-			reg = <0xDC000000 0x1000>;
-			#interrupt-cells = <1>;
-		};
-
-		apb@90000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			i2c@90050000 {
-				compatible = "snps,designware-i2c";
-				reg = <0x90050000 0x1000>;
-				interrupts = <20>;
-			};
-		};
-	};
-
-	panel {
-		compatible = "ti,nspire-cx-lcd-panel";
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&clcd_pads>;
-			};
-		};
-	};
-	chosen {
-		bootargs = "debug earlyprintk console=tty0 console=ttyAMA0,115200n8 root=/dev/ram0";
-	};
-};
diff --git a/arch/arm/boot/dts/nspire-tp.dts b/arch/arm/boot/dts/nspire-tp.dts
deleted file mode 100644
index f7d0faacd4cc..000000000000
--- a/arch/arm/boot/dts/nspire-tp.dts
+++ /dev/null
@@ -1,40 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/boot/nspire-tp.dts
- *
- *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
- */
-/dts-v1/;
-
-/include/ "nspire-classic.dtsi"
-
-&keypad {
-	linux,keymap = <
-	0x0000001c 	0x0001001c 	0x00040039
-	0x0005002c 	0x00060015 	0x0007000b
-	0x0008000f 	0x0100002d 	0x01010011
-	0x0102002f 	0x01030004 	0x01040016
-	0x01050014 	0x0106001f 	0x01070002
-	0x010a006a 	0x02000013 	0x02010010
-	0x02020019 	0x02030007 	0x02040018
-	0x02050031 	0x02060032 	0x02070005
-	0x02080028 	0x0209006c 	0x03000026
-	0x03010025 	0x03020024 	0x0303000a
-	0x03040017 	0x03050023 	0x03060022
-	0x03070008 	0x03080035 	0x03090069
-	0x04000021 	0x04010012 	0x04020020
-	0x0404002e 	0x04050030 	0x0406001e
-	0x0407000d 	0x04080037 	0x04090067
-	0x05010038 	0x0502000c 	0x0503001b
-	0x05040034 	0x0505001a 	0x05060006
-	0x05080027 	0x0509000e 	0x050a006f
-	0x0600002b 	0x0602004e 	0x06030068
-	0x06040003 	0x0605006d 	0x06060009
-	0x06070001 	0x0609000f 	0x0708002a
-	0x0709001d 	0x070a0033 	>;
-};
-
-/ {
-	model = "TI-NSPIRE Touchpad";
-	compatible = "ti,nspire-tp";
-};
diff --git a/arch/arm/boot/dts/nspire.dtsi b/arch/arm/boot/dts/nspire.dtsi
deleted file mode 100644
index 90e033d9141f..000000000000
--- a/arch/arm/boot/dts/nspire.dtsi
+++ /dev/null
@@ -1,203 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/boot/nspire.dtsi
- *
- *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
- */
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&intc>;
-
-	cpus {
-		cpu@0 {
-			compatible = "arm,arm926ej-s";
-		};
-	};
-
-	bootrom: bootrom@0 {
-		reg = <0x00000000 0x80000>;
-	};
-
-	sram: sram@A4000000 {
-		device = "memory";
-		reg = <0xA4000000 0x20000>;
-	};
-
-	timer_clk: timer_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	base_clk: base_clk {
-		#clock-cells = <0>;
-		reg = <0x900B0024 0x4>;
-	};
-
-	ahb_clk: ahb_clk {
-		#clock-cells = <0>;
-		reg = <0x900B0024 0x4>;
-		clocks = <&base_clk>;
-	};
-
-	apb_pclk: apb_pclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <2>;
-		clock-mult = <1>;
-		clocks = <&ahb_clk>;
-	};
-
-	usb_phy: usb_phy {
-		compatible = "usb-nop-xceiv";
-		#phy-cells = <0>;
-	};
-
-	vbus_reg: vbus_reg {
-		compatible = "regulator-fixed";
-
-		regulator-name = "USB VBUS output";
-		regulator-type = "voltage";
-
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	ahb {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		spi: spi@A9000000 {
-			reg = <0xA9000000 0x1000>;
-		};
-
-		usb0: usb@B0000000 {
-			compatible = "lsi,zevio-usb";
-			reg = <0xB0000000 0x1000>;
-			interrupts = <8>;
-
-			usb-phy = <&usb_phy>;
-			vbus-supply = <&vbus_reg>;
-		};
-
-		usb1: usb@B4000000 {
-			reg = <0xB4000000 0x1000>;
-			interrupts = <9>;
-			status = "disabled";
-		};
-
-		lcd: lcd@C0000000 {
-			compatible = "arm,pl111", "arm,primecell";
-			reg = <0xC0000000 0x1000>;
-			interrupts = <21>;
-
-			/*
-			 * We assume the same clock is fed to APB and CLCDCLK.
-			 * There is some code to scale the clock down by a factor
-			 * 48 for the display so likely the frequency to the
-			 * display is 1MHz and the CLCDCLK is 48 MHz.
-			 */
-			clocks = <&apb_pclk>, <&apb_pclk>;
-			clock-names = "clcdclk", "apb_pclk";
-		};
-
-		adc: adc@C4000000 {
-			reg = <0xC4000000 0x1000>;
-			interrupts = <11>;
-		};
-
-		tdes: crypto@C8010000 {
-			reg = <0xC8010000 0x1000>;
-		};
-
-		sha256: crypto@CC000000 {
-			reg = <0xCC000000 0x1000>;
-		};
-
-		apb@90000000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clock-ranges;
-			ranges;
-
-			gpio: gpio@90000000 {
-				compatible = "lsi,zevio-gpio";
-				reg = <0x90000000 0x1000>;
-				interrupts = <7>;
-				gpio-controller;
-				#gpio-cells = <2>;
-			};
-
-			fast_timer: timer@90010000 {
-				reg = <0x90010000 0x1000>;
-				interrupts = <17>;
-			};
-
-			uart: serial@90020000 {
-				reg = <0x90020000 0x1000>;
-				interrupts = <1>;
-			};
-
-			timer0: timer@900C0000 {
-				reg = <0x900C0000 0x1000>;
-				clocks = <&timer_clk>, <&timer_clk>,
-					 <&timer_clk>;
-				clock-names = "timer0clk", "timer1clk",
-					      "apb_pclk";
-			};
-
-			timer1: timer@900D0000 {
-				reg = <0x900D0000 0x1000>;
-				interrupts = <19>;
-				clocks = <&timer_clk>, <&timer_clk>,
-					 <&timer_clk>;
-				clock-names = "timer0clk", "timer1clk",
-					      "apb_pclk";
-			};
-
-			watchdog: watchdog@90060000 {
-				compatible = "arm,amba-primecell";
-				reg = <0x90060000 0x1000>;
-				interrupts = <3>;
-			};
-
-			rtc: rtc@90090000 {
-				reg = <0x90090000 0x1000>;
-				interrupts = <4>;
-			};
-
-			misc: misc@900A0000 {
-				reg = <0x900A0000 0x1000>;
-			};
-
-			pwr: pwr@900B0000 {
-				reg = <0x900B0000 0x1000>;
-				interrupts = <15>;
-			};
-
-			keypad: input@900E0000 {
-				compatible = "ti,nspire-keypad";
-				reg = <0x900E0000 0x1000>;
-				interrupts = <16>;
-
-				scan-interval = <1000>;
-				row-delay = <200>;
-
-				clocks = <&apb_pclk>;
-			};
-
-			contrast: contrast@900F0000 {
-				reg = <0x900F0000 0x1000>;
-			};
-
-			led: led@90110000 {
-				reg = <0x90110000 0x1000>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/nspire/Makefile b/arch/arm/boot/dts/nspire/Makefile
new file mode 100644
index 000000000000..82a2515bdd46
--- /dev/null
+++ b/arch/arm/boot/dts/nspire/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_NSPIRE) += \
+	nspire-cx.dtb \
+	nspire-tp.dtb \
+	nspire-clp.dtb
diff --git a/arch/arm/boot/dts/nspire-classic.dtsi b/arch/arm/boot/dts/nspire/nspire-classic.dtsi
index 41744cc2bc72..0ee53d3ecd54 100644
--- a/arch/arm/boot/dts/nspire-classic.dtsi
+++ b/arch/arm/boot/dts/nspire/nspire-classic.dtsi
@@ -1,7 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- *  linux/arch/arm/boot/nspire-classic.dts
- *
  *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
  */
 
@@ -17,7 +15,7 @@
 
 &fast_timer {
 	/* compatible = "lsi,zevio-timer"; */
-	reg = <0x90010000 0x1000>, <0x900A0010 0x8>;
+	reg = <0x90010000 0x1000>, <0x900a0010 0x8>;
 };
 
 &uart {
@@ -30,12 +28,12 @@
 
 &timer0 {
 	/* compatible = "lsi,zevio-timer"; */
-	reg = <0x900C0000 0x1000>, <0x900A0018 0x8>;
+	reg = <0x900c0000 0x1000>, <0x900a0018 0x8>;
 };
 
 &timer1 {
 	compatible = "lsi,zevio-timer";
-	reg = <0x900D0000 0x1000>, <0x900A0020 0x8>;
+	reg = <0x900d0000 0x1000>, <0x900a0020 0x8>;
 };
 
 &keypad {
@@ -57,7 +55,7 @@
 };
 
 / {
-	memory {
+	memory@10000000 {
 		device_type = "memory";
 		reg = <0x10000000 0x2000000>; /* 32 MB */
 	};
@@ -66,10 +64,10 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 
-		intc: interrupt-controller@DC000000 {
+		intc: interrupt-controller@dc000000 {
 			compatible = "lsi,zevio-intc";
 			interrupt-controller;
-			reg = <0xDC000000 0x1000>;
+			reg = <0xdc000000 0x1000>;
 			#interrupt-cells = <1>;
 		};
 	};
diff --git a/arch/arm/boot/dts/nspire/nspire-clp.dts b/arch/arm/boot/dts/nspire/nspire-clp.dts
new file mode 100644
index 000000000000..c5773f770fd4
--- /dev/null
+++ b/arch/arm/boot/dts/nspire/nspire-clp.dts
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+
+/include/ "nspire-classic.dtsi"
+
+&keypad {
+	linux,keymap = <
+		MATRIX_KEY(0,  0, 0x1c)
+		MATRIX_KEY(0,  1, 0x1c)
+		MATRIX_KEY(0,  2, 0x39)
+		MATRIX_KEY(0,  4, 0x2c)
+		MATRIX_KEY(0,  5, 0x34)
+		MATRIX_KEY(0,  6, 0x15)
+		MATRIX_KEY(0,  7, 0x0b)
+		MATRIX_KEY(0,  8, 0x2d)
+		MATRIX_KEY(1,  0, 0x33)
+		MATRIX_KEY(1,  1, 0x4e)
+		MATRIX_KEY(1,  2, 0x11)
+		MATRIX_KEY(1,  3, 0x04)
+		MATRIX_KEY(1,  4, 0x2f)
+		MATRIX_KEY(1,  5, 0x03)
+		MATRIX_KEY(1,  6, 0x16)
+		MATRIX_KEY(1,  7, 0x02)
+		MATRIX_KEY(1,  8, 0x14)
+		MATRIX_KEY(2,  0, 0x62)
+		MATRIX_KEY(2,  1, 0x0c)
+		MATRIX_KEY(2,  2, 0x1f)
+		MATRIX_KEY(2,  3, 0x07)
+		MATRIX_KEY(2,  4, 0x13)
+		MATRIX_KEY(2,  5, 0x06)
+		MATRIX_KEY(2,  6, 0x10)
+		MATRIX_KEY(2,  7, 0x05)
+		MATRIX_KEY(2,  8, 0x19)
+		MATRIX_KEY(3,  0, 0x27)
+		MATRIX_KEY(3,  1, 0x37)
+		MATRIX_KEY(3,  2, 0x18)
+		MATRIX_KEY(3,  3, 0x0a)
+		MATRIX_KEY(3,  4, 0x31)
+		MATRIX_KEY(3,  5, 0x09)
+		MATRIX_KEY(3,  6, 0x32)
+		MATRIX_KEY(3,  7, 0x08)
+		MATRIX_KEY(3,  8, 0x26)
+		MATRIX_KEY(4,  0, 0x28)
+		MATRIX_KEY(4,  1, 0x35)
+		MATRIX_KEY(4,  2, 0x25)
+		MATRIX_KEY(4,  4, 0x24)
+		MATRIX_KEY(4,  6, 0x17)
+		MATRIX_KEY(4,  8, 0x23)
+		MATRIX_KEY(5,  0, 0x28)
+		MATRIX_KEY(5,  2, 0x22)
+		MATRIX_KEY(5,  3, 0x1b)
+		MATRIX_KEY(5,  4, 0x21)
+		MATRIX_KEY(5,  5, 0x1a)
+		MATRIX_KEY(5,  6, 0x12)
+		MATRIX_KEY(5,  7, 0x6f)
+		MATRIX_KEY(5,  8, 0x20)
+		MATRIX_KEY(5,  9, 0x2a)
+		MATRIX_KEY(6,  1, 0x1c)
+		MATRIX_KEY(6,  2, 0x2e)
+		MATRIX_KEY(6,  3, 0x68)
+		MATRIX_KEY(6,  4, 0x30)
+		MATRIX_KEY(6,  5, 0x6d)
+		MATRIX_KEY(6,  6, 0x1e)
+		MATRIX_KEY(6,  7, 0x01)
+		MATRIX_KEY(6,  8, 0x2b)
+		MATRIX_KEY(6,  9, 0x0f)
+		MATRIX_KEY(7,  0, 0x67)
+		MATRIX_KEY(7,  2, 0x6a)
+		MATRIX_KEY(7,  4, 0x6c)
+		MATRIX_KEY(7,  6, 0x69)
+		MATRIX_KEY(7,  7, 0x0e)
+		MATRIX_KEY(7,  8, 0x1d)
+		MATRIX_KEY(7, 10, 0x0d)
+	>;
+};
+
+/ {
+	model = "TI-NSPIRE Clickpad";
+	compatible = "ti,nspire-clp";
+};
diff --git a/arch/arm/boot/dts/nspire/nspire-cx.dts b/arch/arm/boot/dts/nspire/nspire-cx.dts
new file mode 100644
index 000000000000..debeff0ec010
--- /dev/null
+++ b/arch/arm/boot/dts/nspire/nspire-cx.dts
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+
+/include/ "nspire.dtsi"
+
+&lcd {
+	port {
+		clcd_pads: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&fast_timer {
+	/* compatible = "arm,sp804", "arm,primecell"; */
+};
+
+&uart {
+	compatible = "arm,pl011", "arm,primecell";
+
+	clocks = <&uart_clk>, <&apb_pclk>;
+	clock-names = "uartclk", "apb_pclk";
+};
+
+&timer0 {
+	compatible = "arm,sp804", "arm,primecell";
+};
+
+&timer1 {
+	compatible = "arm,sp804", "arm,primecell";
+};
+
+&base_clk {
+	compatible = "lsi,nspire-cx-clock";
+};
+
+&ahb_clk {
+	compatible = "lsi,nspire-cx-ahb-divider";
+};
+
+&keypad {
+	linux,keymap = <
+		MATRIX_KEY(0,  0, 0x1c)
+		MATRIX_KEY(0,  1, 0x1c)
+		MATRIX_KEY(0,  4, 0x39)
+		MATRIX_KEY(0,  5, 0x2c)
+		MATRIX_KEY(0,  6, 0x15)
+		MATRIX_KEY(0,  7, 0x0b)
+		MATRIX_KEY(0,  8, 0x0f)
+		MATRIX_KEY(1,  0, 0x2d)
+		MATRIX_KEY(1,  1, 0x11)
+		MATRIX_KEY(1,  2, 0x2f)
+		MATRIX_KEY(1,  3, 0x04)
+		MATRIX_KEY(1,  4, 0x16)
+		MATRIX_KEY(1,  5, 0x14)
+		MATRIX_KEY(1,  6, 0x1f)
+		MATRIX_KEY(1,  7, 0x02)
+		MATRIX_KEY(1, 10, 0x6a)
+		MATRIX_KEY(2,  0, 0x13)
+		MATRIX_KEY(2,  1, 0x10)
+		MATRIX_KEY(2,  2, 0x19)
+		MATRIX_KEY(2,  3, 0x07)
+		MATRIX_KEY(2,  4, 0x18)
+		MATRIX_KEY(2,  5, 0x31)
+		MATRIX_KEY(2,  6, 0x32)
+		MATRIX_KEY(2,  7, 0x05)
+		MATRIX_KEY(2,  8, 0x28)
+		MATRIX_KEY(2,  9, 0x6c)
+		MATRIX_KEY(3,  0, 0x26)
+		MATRIX_KEY(3,  1, 0x25)
+		MATRIX_KEY(3,  2, 0x24)
+		MATRIX_KEY(3,  3, 0x0a)
+		MATRIX_KEY(3,  4, 0x17)
+		MATRIX_KEY(3,  5, 0x23)
+		MATRIX_KEY(3,  6, 0x22)
+		MATRIX_KEY(3,  7, 0x08)
+		MATRIX_KEY(3,  8, 0x35)
+		MATRIX_KEY(3,  9, 0x69)
+		MATRIX_KEY(4,  0, 0x21)
+		MATRIX_KEY(4,  1, 0x12)
+		MATRIX_KEY(4,  2, 0x20)
+		MATRIX_KEY(4,  4, 0x2e)
+		MATRIX_KEY(4,  5, 0x30)
+		MATRIX_KEY(4,  6, 0x1e)
+		MATRIX_KEY(4,  7, 0x0d)
+		MATRIX_KEY(4,  8, 0x37)
+		MATRIX_KEY(4,  9, 0x67)
+		MATRIX_KEY(5,  1, 0x38)
+		MATRIX_KEY(5,  2, 0x0c)
+		MATRIX_KEY(5,  3, 0x1b)
+		MATRIX_KEY(5,  4, 0x34)
+		MATRIX_KEY(5,  5, 0x1a)
+		MATRIX_KEY(5,  6, 0x06)
+		MATRIX_KEY(5,  8, 0x27)
+		MATRIX_KEY(5,  9, 0x0e)
+		MATRIX_KEY(5, 10, 0x6f)
+		MATRIX_KEY(6,  0, 0x2b)
+		MATRIX_KEY(6,  2, 0x4e)
+		MATRIX_KEY(6,  3, 0x68)
+		MATRIX_KEY(6,  4, 0x03)
+		MATRIX_KEY(6,  5, 0x6d)
+		MATRIX_KEY(6,  6, 0x09)
+		MATRIX_KEY(6,  7, 0x01)
+		MATRIX_KEY(6,  9, 0x0f)
+		MATRIX_KEY(7,  8, 0x2a)
+		MATRIX_KEY(7,  9, 0x1d)
+		MATRIX_KEY(7, 10, 0x33)
+	>;
+};
+
+&vbus_reg {
+	gpio = <&gpio 2 0>;
+};
+
+/ {
+	model = "TI-NSPIRE CX";
+	compatible = "ti,nspire-cx";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x4000000>; /* 64 MB */
+	};
+
+	uart_clk: uart_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		intc: interrupt-controller@dc000000 {
+			compatible = "arm,pl190-vic";
+			interrupt-controller;
+			reg = <0xdc000000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		apb@90000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			i2c@90050000 {
+				compatible = "snps,designware-i2c";
+				reg = <0x90050000 0x1000>;
+				interrupts = <20>;
+			};
+		};
+	};
+
+	panel {
+		compatible = "ti,nspire-cx-lcd-panel";
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&clcd_pads>;
+			};
+		};
+	};
+	chosen {
+		bootargs = "debug earlyprintk console=tty0 console=ttyAMA0,115200n8 root=/dev/ram0";
+	};
+};
diff --git a/arch/arm/boot/dts/nspire/nspire-tp.dts b/arch/arm/boot/dts/nspire/nspire-tp.dts
new file mode 100644
index 000000000000..3f0107f1c2c7
--- /dev/null
+++ b/arch/arm/boot/dts/nspire/nspire-tp.dts
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+
+/include/ "nspire-classic.dtsi"
+
+&keypad {
+	linux,keymap = <
+		MATRIX_KEY(0,  0, 0x1c)
+		MATRIX_KEY(0,  1, 0x1c)
+		MATRIX_KEY(0,  4, 0x39)
+		MATRIX_KEY(0,  5, 0x2c)
+		MATRIX_KEY(0,  6, 0x15)
+		MATRIX_KEY(0,  7, 0x0b)
+		MATRIX_KEY(0,  8, 0x0f)
+		MATRIX_KEY(1,  0, 0x2d)
+		MATRIX_KEY(1,  1, 0x11)
+		MATRIX_KEY(1,  2, 0x2f)
+		MATRIX_KEY(1,  3, 0x04)
+		MATRIX_KEY(1,  4, 0x16)
+		MATRIX_KEY(1,  5, 0x14)
+		MATRIX_KEY(1,  6, 0x1f)
+		MATRIX_KEY(1,  7, 0x02)
+		MATRIX_KEY(1, 10, 0x6a)
+		MATRIX_KEY(2,  0, 0x13)
+		MATRIX_KEY(2,  1, 0x10)
+		MATRIX_KEY(2,  2, 0x19)
+		MATRIX_KEY(2,  3, 0x07)
+		MATRIX_KEY(2,  4, 0x18)
+		MATRIX_KEY(2,  5, 0x31)
+		MATRIX_KEY(2,  6, 0x32)
+		MATRIX_KEY(2,  7, 0x05)
+		MATRIX_KEY(2,  8, 0x28)
+		MATRIX_KEY(2,  9, 0x6c)
+		MATRIX_KEY(3,  0, 0x26)
+		MATRIX_KEY(3,  1, 0x25)
+		MATRIX_KEY(3,  2, 0x24)
+		MATRIX_KEY(3,  3, 0x0a)
+		MATRIX_KEY(3,  4, 0x17)
+		MATRIX_KEY(3,  5, 0x23)
+		MATRIX_KEY(3,  6, 0x22)
+		MATRIX_KEY(3,  7, 0x08)
+		MATRIX_KEY(3,  8, 0x35)
+		MATRIX_KEY(3,  9, 0x69)
+		MATRIX_KEY(4,  0, 0x21)
+		MATRIX_KEY(4,  1, 0x12)
+		MATRIX_KEY(4,  2, 0x20)
+		MATRIX_KEY(4,  4, 0x2e)
+		MATRIX_KEY(4,  5, 0x30)
+		MATRIX_KEY(4,  6, 0x1e)
+		MATRIX_KEY(4,  7, 0x0d)
+		MATRIX_KEY(4,  8, 0x37)
+		MATRIX_KEY(4,  9, 0x67)
+		MATRIX_KEY(5,  1, 0x38)
+		MATRIX_KEY(5,  2, 0x0c)
+		MATRIX_KEY(5,  3, 0x1b)
+		MATRIX_KEY(5,  4, 0x34)
+		MATRIX_KEY(5,  5, 0x1a)
+		MATRIX_KEY(5,  6, 0x06)
+		MATRIX_KEY(5,  8, 0x27)
+		MATRIX_KEY(5,  9, 0x0e)
+		MATRIX_KEY(5, 10, 0x6f)
+		MATRIX_KEY(6,  0, 0x2b)
+		MATRIX_KEY(6,  2, 0x4e)
+		MATRIX_KEY(6,  3, 0x68)
+		MATRIX_KEY(6,  4, 0x03)
+		MATRIX_KEY(6,  5, 0x6d)
+		MATRIX_KEY(6,  6, 0x09)
+		MATRIX_KEY(6,  7, 0x01)
+		MATRIX_KEY(6,  9, 0x0f)
+		MATRIX_KEY(7,  8, 0x2a)
+		MATRIX_KEY(7,  9, 0x1d)
+		MATRIX_KEY(7, 10, 0x33)
+	>;
+};
+
+/ {
+	model = "TI-NSPIRE Touchpad";
+	compatible = "ti,nspire-tp";
+};
diff --git a/arch/arm/boot/dts/nspire/nspire.dtsi b/arch/arm/boot/dts/nspire/nspire.dtsi
new file mode 100644
index 000000000000..95588b716c6f
--- /dev/null
+++ b/arch/arm/boot/dts/nspire/nspire.dtsi
@@ -0,0 +1,222 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
+ */
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	bootrom: bootrom@0 {
+		reg = <0x00000000 0x80000>;
+	};
+
+	sram: sram@a4000000 {
+		compatible = "mmio-sram";
+		reg = <0xa4000000 0x20000>; /* 128k */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xa4000000 0x20000>;
+
+		sram@0 {
+			reg = <0x0 0x20000>;
+		};
+	};
+
+	timer_clk: timer_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	base_clk: base_clk {
+		#clock-cells = <0>;
+		reg = <0x900b0024 0x4>;
+	};
+
+	ahb_clk: ahb_clk {
+		#clock-cells = <0>;
+		reg = <0x900b0024 0x4>;
+		clocks = <&base_clk>;
+	};
+
+	apb_pclk: apb_pclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <2>;
+		clock-mult = <1>;
+		clocks = <&ahb_clk>;
+	};
+
+	usb_phy: usb_phy {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+
+	vbus_reg: vbus_reg {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB VBUS output";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		spi: spi@a9000000 {
+			reg = <0xa9000000 0x1000>;
+		};
+
+		usb0: usb@b0000000 {
+			compatible = "lsi,zevio-usb";
+			reg = <0xb0000000 0x1000>;
+			interrupts = <8>;
+
+			usb-phy = <&usb_phy>;
+			vbus-supply = <&vbus_reg>;
+		};
+
+		usb1: usb@b4000000 {
+			reg = <0xb4000000 0x1000>;
+			interrupts = <9>;
+			status = "disabled";
+		};
+
+		lcd: lcd@c0000000 {
+			compatible = "arm,pl111", "arm,primecell";
+			reg = <0xc0000000 0x1000>;
+			interrupts = <21>;
+
+			/*
+			 * We assume the same clock is fed to APB and CLCDCLK.
+			 * There is some code to scale the clock down by a factor
+			 * 48 for the display so likely the frequency to the
+			 * display is 1MHz and the CLCDCLK is 48 MHz.
+			 */
+			clocks = <&apb_pclk>, <&apb_pclk>;
+			clock-names = "clcdclk", "apb_pclk";
+		};
+
+		adc: adc@c4000000 {
+			reg = <0xc4000000 0x1000>;
+			interrupts = <11>;
+		};
+
+		tdes: crypto@c8010000 {
+			reg = <0xc8010000 0x1000>;
+		};
+
+		sha256: crypto@cc000000 {
+			reg = <0xcc000000 0x1000>;
+		};
+
+		apb@90000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clock-ranges;
+			ranges;
+
+			gpio: gpio@90000000 {
+				compatible = "lsi,zevio-gpio";
+				reg = <0x90000000 0x1000>;
+				interrupts = <7>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			fast_timer: timer@90010000 {
+				reg = <0x90010000 0x1000>;
+				interrupts = <17>;
+			};
+
+			uart: serial@90020000 {
+				reg = <0x90020000 0x1000>;
+				interrupts = <1>;
+			};
+
+			timer0: timer@900c0000 {
+				reg = <0x900c0000 0x1000>;
+				clocks = <&timer_clk>, <&timer_clk>,
+					 <&timer_clk>;
+				clock-names = "timer0clk", "timer1clk",
+					      "apb_pclk";
+			};
+
+			timer1: timer@900d0000 {
+				reg = <0x900d0000 0x1000>;
+				interrupts = <19>;
+				clocks = <&timer_clk>, <&timer_clk>,
+					 <&timer_clk>;
+				clock-names = "timer0clk", "timer1clk",
+					      "apb_pclk";
+			};
+
+			watchdog: watchdog@90060000 {
+				compatible = "arm,sp805", "arm,primecell";
+				reg = <0x90060000 0x1000>;
+				interrupts = <3>;
+				clocks = <&apb_pclk>, <&apb_pclk>;
+				clock-names = "wdog_clk", "apb_pclk";
+				status = "disabled";
+			};
+
+			rtc: rtc@90090000 {
+				reg = <0x90090000 0x1000>;
+				interrupts = <4>;
+			};
+
+			misc: misc@900a0000 {
+				compatible = "ti,nspire-misc", "syscon", "simple-mfd";
+				reg = <0x900a0000 0x1000>;
+
+				reboot {
+					compatible = "syscon-reboot";
+					offset = <0x08>;
+					value = <0x02>;
+				};
+			};
+
+			pwr: pwr@900b0000 {
+				reg = <0x900b0000 0x1000>;
+				interrupts = <15>;
+			};
+
+			keypad: input@900e0000 {
+				compatible = "ti,nspire-keypad";
+				reg = <0x900e0000 0x1000>;
+				interrupts = <16>;
+
+				scan-interval = <1000>;
+				row-delay = <200>;
+
+				clocks = <&apb_pclk>;
+			};
+
+			contrast: contrast@900f0000 {
+				reg = <0x900f0000 0x1000>;
+			};
+
+			led: led@90110000 {
+				reg = <0x90110000 0x1000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nuvoton-npcm750.dtsi b/arch/arm/boot/dts/nuvoton-npcm750.dtsi
deleted file mode 100644
index 13eee0fe5642..000000000000
--- a/arch/arm/boot/dts/nuvoton-npcm750.dtsi
+++ /dev/null
@@ -1,62 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (c) 2018 Nuvoton Technology tomer.maimon@nuvoton.com
-// Copyright 2018 Google, Inc.
-
-#include "nuvoton-common-npcm7xx.dtsi"
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&gic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "nuvoton,npcm750-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			clocks = <&clk NPCM7XX_CLK_CPU>;
-			clock-names = "clk_cpu";
-			reg = <0>;
-			next-level-cache = <&l2>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			clocks = <&clk NPCM7XX_CLK_CPU>;
-			clock-names = "clk_cpu";
-			reg = <1>;
-			next-level-cache = <&l2>;
-		};
-	};
-
-	soc {
-		timer@3fe600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x3fe600 0x20>;
-			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
-						  IRQ_TYPE_LEVEL_HIGH)>;
-			clocks = <&clk NPCM7XX_CLK_AHB>;
-		};
-	};
-
-	ahb {
-		gmac1: eth@f0804000 {
-			device_type = "network";
-			compatible = "snps,dwmac";
-			reg = <0xf0804000 0x2000>;
-			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "macirq";
-			ethernet = <1>;
-			clocks	= <&clk_rg2refck>, <&clk NPCM7XX_CLK_AHB>;
-			clock-names = "stmmaceth", "clk_gmac";
-			pinctrl-names = "default";
-			pinctrl-0 = <&rg2_pins
-					&rg2mdio_pins>;
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts b/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts
deleted file mode 100644
index 83f27fbf4e93..000000000000
--- a/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts
+++ /dev/null
@@ -1,40 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-// Copyright 2021 Jonathan Neuschäfer
-
-/dts-v1/;
-
-/* The last 16 MiB are dedicated to the GPU */
-/memreserve/ 0x07000000 0x01000000;
-
-#include "nuvoton-wpcm450.dtsi"
-
-/ {
-	model = "Supermicro X9SCi-LN4F BMC";
-	compatible = "supermicro,x9sci-ln4f-bmc", "nuvoton,wpcm450";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0x08000000>; /* 128 MiB */
-	};
-};
-
-&serial0 {
-	/*
-	 * Debug serial port. TX is exposed on the right pad of unpopulated
-	 * resistor R1247, RX on the right pad of R1162.
-	 */
-	status = "okay";
-};
-
-&serial1 {
-	/* "Serial over LAN" port. Connected to ttyS2 of the host system. */
-	status = "okay";
-};
-
-&watchdog0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/nuvoton-wpcm450.dtsi b/arch/arm/boot/dts/nuvoton-wpcm450.dtsi
deleted file mode 100644
index d7cbeb187484..000000000000
--- a/arch/arm/boot/dts/nuvoton-wpcm450.dtsi
+++ /dev/null
@@ -1,76 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-// Copyright 2021 Jonathan Neuschäfer
-
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "nuvoton,wpcm450";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,arm926ej-s";
-			device_type = "cpu";
-			reg = <0>;
-		};
-	};
-
-	clk24m: clock-24mhz {
-		/* 24 MHz dummy clock */
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-		#clock-cells = <0>;
-	};
-
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		interrupt-parent = <&aic>;
-		ranges;
-
-		serial0: serial@b8000000 {
-			compatible = "nuvoton,wpcm450-uart";
-			reg = <0xb8000000 0x20>;
-			reg-shift = <2>;
-			interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk24m>;
-			status = "disabled";
-		};
-
-		serial1: serial@b8000100 {
-			compatible = "nuvoton,wpcm450-uart";
-			reg = <0xb8000100 0x20>;
-			reg-shift = <2>;
-			interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk24m>;
-			status = "disabled";
-		};
-
-		timer0: timer@b8001000 {
-			compatible = "nuvoton,wpcm450-timer";
-			interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
-			reg = <0xb8001000 0x1c>;
-			clocks = <&clk24m>;
-		};
-
-		watchdog0: watchdog@b800101c {
-			compatible = "nuvoton,wpcm450-wdt";
-			interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
-			reg = <0xb800101c 0x4>;
-			clocks = <&clk24m>;
-			status = "disabled";
-		};
-
-		aic: interrupt-controller@b8002000 {
-			compatible = "nuvoton,wpcm450-aic";
-			reg = <0xb8002000 0x1000>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/nuvoton/Makefile b/arch/arm/boot/dts/nuvoton/Makefile
new file mode 100644
index 000000000000..89c157dad312
--- /dev/null
+++ b/arch/arm/boot/dts/nuvoton/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_NPCM7XX) += \
+	nuvoton-npcm730-gsj.dtb \
+	nuvoton-npcm730-gbs.dtb \
+	nuvoton-npcm730-kudo.dtb \
+	nuvoton-npcm750-evb.dtb \
+	nuvoton-npcm750-runbmc-olympus.dtb
+dtb-$(CONFIG_ARCH_WPCM450) += \
+	nuvoton-wpcm450-supermicro-x9sci-ln4f.dtb
diff --git a/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi
index 3696980a3da1..98c35771534e 100644
--- a/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi
@@ -99,6 +99,11 @@
 		};
 	};
 
+	udc0_phy: usb-phy {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+
 	ahb {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -110,6 +115,7 @@
 			compatible = "nuvoton,npcm750-reset";
 			reg = <0xf0801000 0x70>;
 			#reset-cells = <2>;
+			nuvoton,sysgcr = <&gcr>;
 		};
 
 		clk: clock-controller@f0801000 {
@@ -121,14 +127,21 @@
 			clocks = <&clk_refclk>, <&clk_sysbypck>, <&clk_mcbypck>;
 		};
 
-		gmac0: eth@f0802000 {
+		mc: memory-controller@f0824000 {
+			compatible = "nuvoton,npcm750-memory-controller";
+			reg = <0xf0824000 0x1000>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		gmac0: ethernet@f0802000 {
 			device_type = "network";
 			compatible = "snps,dwmac";
 			reg = <0xf0802000 0x2000>;
 			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "macirq";
 			ethernet = <0>;
-			clocks	= <&clk_rg1refck>, <&clk NPCM7XX_CLK_AHB>;
+			clocks = <&clk_rg1refck>, <&clk NPCM7XX_CLK_AHB>;
 			clock-names = "stmmaceth", "clk_gmac";
 			pinctrl-names = "default";
 			pinctrl-0 = <&rg1_pins
@@ -136,6 +149,29 @@
 			status = "disabled";
 		};
 
+		sdmmc: mmc@f0842000 {
+			compatible = "nuvoton,npcm750-sdhci";
+			status = "disabled";
+			reg = <0xf0842000 0x200>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks =  <&clk NPCM7XX_CLK_AHB>;
+			clock-names = "clk_mmc";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc8_pins
+					&mmc_pins>;
+		};
+
+		sdhci: mmc@f0840000 {
+			compatible = "nuvoton,npcm750-sdhci";
+			status = "disabled";
+			reg = <0xf0840000 0x200>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks =  <&clk NPCM7XX_CLK_AHB>;
+			clock-names = "clk_sdhc";
+			pinctrl-names = "default";
+			pinctrl-0 = <&sd1_pins>;
+		};
+
 		ehci1: usb@f0806000 {
 			compatible = "nuvoton,npcm750-ehci";
 			reg = <0xf0806000 0x1000>;
@@ -143,6 +179,13 @@
 			status = "disabled";
 		};
 
+		ohci1: usb@f0807000 {
+			compatible = "generic-ohci";
+			reg = <0xf0807000 0x1000>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
 		fiu0: spi@fb000000 {
 			compatible = "nuvoton,npcm750-fiu";
 			#address-cells = <1>;
@@ -178,6 +221,72 @@
 			status = "disabled";
 		};
 
+		udc5: usb@f0835000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0835000 0x1000
+			       0xfffd2800 0x800>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
+
+		udc6: usb@f0836000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0836000 0x1000
+			       0xfffd3000 0x800>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
+
+		udc7: usb@f0837000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0837000 0x1000
+			       0xfffd3800 0x800>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
+
+		udc8: usb@f0838000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0838000 0x1000
+			       0xfffd4000 0x800>;
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
+
+		udc9: usb@f0839000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0839000 0x1000
+			       0xfffd4800 0x800>;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			nuvoton,sysgcr = <&gcr>;
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
+
 		apb {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -219,6 +328,15 @@
 				};
 			};
 
+			peci: peci-controller@f0100000 {
+				compatible = "nuvoton,npcm750-peci";
+				reg = <0xf0100000 0x200>;
+				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk NPCM7XX_CLK_APB3>;
+				cmd-timeout-ms = <1000>;
+				status = "disabled";
+			};
+
 			spi0: spi@200000 {
 				compatible = "nuvoton,npcm750-pspi";
 				reg = <0x200000 0x1000>;
diff --git a/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-gbs.dts
index eb6eb21cb2a4..231228842e63 100644
--- a/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-gbs.dts
@@ -358,7 +358,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi0cs1_pins>;
 	status = "okay";
-	spi-nor@0 {
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -366,7 +366,7 @@
 		spi-max-frequency = <20000000>;
 		spi-rx-bus-width = <2>;
 		label = "bmc";
-		partitions@80000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -406,7 +406,7 @@
 	pinctrl-0 = <&spi3_pins>, <&spi3cs1_pins>;
 	status = "okay";
 
-	spi-nor@0 {
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -416,7 +416,7 @@
 		m25p,fast-read;
 		label = "pnor";
 	};
-	spi-nor@1 {
+	flash@1 {
 		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -525,7 +525,7 @@
 	clock-frequency = <100000>;
 	status = "okay";
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9546";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -661,12 +661,12 @@
 	clock-frequency = <100000>;
 	status = "okay";
 
-	mb_fru@50 {
+	eeprom@50 {
 		compatible = "atmel,24c64";
 		reg = <0x50>;
 	};
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9546";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -704,7 +704,7 @@
 				reg = <0x5d>;
 				status = "okay";
 			};
-			fan_fru@51 {
+			eeprom@51 {
 				compatible = "atmel,24c64";
 				reg = <0x51>;
 			};
@@ -714,7 +714,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <3>;
-			hsbp_fru@52 {
+			eeprom@52 {
 				compatible = "atmel,24c64";
 				reg = <0x52>;
 				status = "okay";
@@ -727,7 +727,7 @@
 	clock-frequency = <100000>;
 	status = "okay";
 
-	i2c-switch@73 {
+	i2c-mux@73 {
 		compatible = "nxp,pca9545";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -763,7 +763,7 @@
 	clock-frequency = <100000>;
 	status = "okay";
 
-	i2c-switch@72 {
+	i2c-mux@72 {
 		compatible = "nxp,pca9545";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -812,7 +812,7 @@
 	clock-frequency = <100000>;
 	status = "okay";
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9546";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -866,7 +866,7 @@
 	clock-frequency = <100000>;
 	status = "okay";
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9545";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -902,7 +902,7 @@
 	clock-frequency = <100000>;
 	status = "okay";
 
-	i2c-switch@76 {
+	i2c-mux@76 {
 		compatible = "nxp,pca9545";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -961,7 +961,7 @@
 	clock-frequency = <100000>;
 	status = "okay";
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9545";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -1050,19 +1050,19 @@
 		"","","","SIO_POWER_GOOD","","","","";
 	};
 	gpio2: gpio@f0012000 {
-		bmc_usb_mux_oe_n {
+		bmc-usb-mux-oe-n-hog {
 			gpio-hog;
 			gpios = <25 GPIO_ACTIVE_HIGH>;
 			output-low;
 			line-name = "bmc-usb-mux-oe-n";
 		};
-		bmc_usb_mux_sel {
+		bmc-usb-mux-sel-hog {
 			gpio-hog;
 			gpios = <26 GPIO_ACTIVE_HIGH>;
 			output-low;
 			line-name = "bmc-usb-mux-sel";
 		};
-		bmc_usb2517_reset_n {
+		bmc-usb2517-reset-n-hog {
 			gpio-hog;
 			gpios = <27 GPIO_ACTIVE_LOW>;
 			output-low;
@@ -1070,19 +1070,19 @@
 		};
 	};
 	gpio3: gpio@f0013000 {
-		assert_cpu0_reset {
+		assert-cpu0-reset-hog {
 			gpio-hog;
 			gpios = <14 GPIO_ACTIVE_HIGH>;
 			output-low;
 			line-name = "assert-cpu0-reset";
 		};
-		assert_pwrok_cpu0_n {
+		assert-pwrok-cpu0-n-hog {
 			gpio-hog;
 			gpios = <15 GPIO_ACTIVE_HIGH>;
 			output-low;
 			line-name = "assert-pwrok-cpu0-n";
 		};
-		assert_cpu0_prochot {
+		assert-cpu0-prochot-hog {
 			gpio-hog;
 			gpios = <16 GPIO_ACTIVE_HIGH>;
 			output-low;
diff --git a/arch/arm/boot/dts/nuvoton-npcm730-gsj-gpio.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-gsj-gpio.dtsi
index 53cfd15fa03f..53cfd15fa03f 100644
--- a/arch/arm/boot/dts/nuvoton-npcm730-gsj-gpio.dtsi
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-gsj-gpio.dtsi
diff --git a/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-gsj.dts
index d4ff49939a3d..cd7843339c24 100644
--- a/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-gsj.dts
@@ -135,18 +135,18 @@
 	pinctrl-0 = <&spi0cs1_pins>;
 	status = "okay";
 
-	spi-nor@0 {
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <0>;
 		spi-rx-bus-width = <2>;
 
-		partitions@80000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			bmc@0{
+			bmc@0 {
 				label = "bmc";
 				reg = <0x000000 0x2000000>;
 			};
@@ -155,7 +155,7 @@
 				reg = <0x0000000 0x80000>;
 				read-only;
 			};
-			u-boot-env@100000{
+			u-boot-env@100000 {
 				label = "u-boot-env";
 				reg = <0x00100000 0x40000>;
 			};
@@ -303,7 +303,7 @@
 &i2c15 {
 	status = "okay";
 
-	i2c-switch@75 {
+	i2c-mux@75 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts
index 82a104b2a65f..886a87dfcd0d 100644
--- a/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts
@@ -380,7 +380,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi0cs1_pins>;
 	status = "okay";
-	spi-nor@0 {
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -388,7 +388,7 @@
 		spi-max-frequency = <5000000>;
 		spi-rx-bus-width = <2>;
 		label = "bmc";
-		partitions@80000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -397,7 +397,7 @@
 				reg = <0x0000000 0xC0000>;
 				read-only;
 			};
-			u-boot-env@100000{
+			u-boot-env@100000 {
 				label = "u-boot-env";
 				reg = <0x00100000 0x40000>;
 			};
@@ -415,14 +415,14 @@
 			};
 		};
 	};
-	spi-nor@1 {
+	flash@1 {
 		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <1>;
 		spi-max-frequency = <5000000>;
 		spi-rx-bus-width = <2>;
-		partitions@88000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -440,14 +440,14 @@
 
 &fiu3 {
 	pinctrl-0 = <&spi3_pins>;
-	spi-nor@0 {
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <0>;
 		spi-max-frequency = <5000000>;
 		spi-rx-bus-width = <2>;
-		partitions@A0000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -494,7 +494,7 @@
 
 &i2c1 {
 	status = "okay";
-	i2c-switch@75 {
+	i2c-mux@75 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -525,62 +525,62 @@
 			};
 		};
 
-		i2c-bus@4 {
+		i2c@4 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <4>;
 
 			// INLET1_T
-			lm75@5c {
-				compatible = "ti,lm75";
+			temperature-sensor@5c {
+				compatible = "national,lm75";
 				reg = <0x5c>;
 			};
 		};
 
-		i2c-bus@5 {
+		i2c@5 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <5>;
 
 			// OUTLET1_T
-			lm75@5c {
-				compatible = "ti,lm75";
+			temperature-sensor@5c {
+				compatible = "national,lm75";
 				reg = <0x5c>;
 			};
 		};
 
-		i2c-bus@6 {
+		i2c@6 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <6>;
 
 			// OUTLET2_T
-			lm75@5c {
-				compatible = "ti,lm75";
+			temperature-sensor@5c {
+				compatible = "national,lm75";
 				reg = <0x5c>;
 			};
 		};
 
-		i2c-bus@7 {
+		i2c@7 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <7>;
 
 			// OUTLET3_T
-			lm75@5c {
-				compatible = "ti,lm75";
+			temperature-sensor@5c {
+				compatible = "national,lm75";
 				reg = <0x5c>;
 			};
 		};
 	};
-	i2c-switch@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x77>;
 		i2c-mux-idle-disconnect;
 
-		i2c-bus@2 {
+		i2c@2 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2>;
@@ -613,14 +613,14 @@
 
 &i2c4 {
 	status = "okay";
-	i2c-switch@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x77>;
 		i2c-mux-idle-disconnect;
 
-		i2c-bus@0 {
+		i2c@0 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
@@ -632,7 +632,7 @@
 			};
 		};
 
-		i2c-bus@1 {
+		i2c@1 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <1>;
@@ -684,56 +684,56 @@
 
 &i2c13 {
 	status = "okay";
-	i2c-switch@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x77>;
 		i2c-mux-idle-disconnect;
 
-		i2c-bus@3 {
+		i2c@3 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <3>;
 
 			// M2_ZONE_T
-			lm75@28 {
-				compatible = "ti,lm75";
+			temperature-sensor@28 {
+				compatible = "national,lm75";
 				reg = <0x28>;
 			};
 		};
 
-		i2c-bus@4 {
+		i2c@4 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <4>;
 
 			// BATT_ZONE_T
-			lm75@29 {
-				compatible = "ti,lm75";
+			temperature-sensor@29 {
+				compatible = "national,lm75";
 				reg = <0x29>;
 			};
 		};
 
-		i2c-bus@5 {
+		i2c@5 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <5>;
 
 			// NBM1_ZONE_T
-			lm75@28 {
-				compatible = "ti,lm75";
+			temperature-sensor@28 {
+				compatible = "national,lm75";
 				reg = <0x28>;
 			};
 		};
-		i2c-bus@6 {
+		i2c@6 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <6>;
 
 			// NBM2_ZONE_T
-			lm75@29 {
-				compatible = "ti,lm75";
+			temperature-sensor@29 {
+				compatible = "national,lm75";
 				reg = <0x29>;
 			};
 		};
diff --git a/arch/arm/boot/dts/nuvoton-npcm730.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730.dtsi
index 86ec12ec2b50..86ec12ec2b50 100644
--- a/arch/arm/boot/dts/nuvoton-npcm730.dtsi
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730.dtsi
diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-evb.dts
index 0334641f8829..bcdcb30c7bf6 100644
--- a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-evb.dts
@@ -67,14 +67,14 @@
 
 &fiu0 {
 	status = "okay";
-	spi-nor@0 {
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		spi-rx-bus-width = <2>;
 		reg = <0>;
 		spi-max-frequency = <5000000>;
-		partitions@80000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -128,14 +128,14 @@
 &fiu3 {
 	pinctrl-0 = <&spi3_pins>, <&spi3quad_pins>;
 	status = "okay";
-	spi-nor@0 {
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		spi-rx-bus-width = <2>;
 		reg = <0>;
 		spi-max-frequency = <5000000>;
-		partitions@A0000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -198,7 +198,7 @@
 	clock-frequency = <100000>;
 	status = "okay";
 	lm75@48 {
-		compatible = "lm75";
+		compatible = "national,lm75";
 		reg = <0x48>;
 		status = "okay";
 	};
@@ -208,8 +208,8 @@
 &i2c1 {
 	clock-frequency = <100000>;
 	status = "okay";
-	lm75@48 {
-		compatible = "lm75";
+	temperature-sensor@48 {
+		compatible = "national,lm75";
 		reg = <0x48>;
 		status = "okay";
 	};
@@ -324,7 +324,7 @@
 &spi0 {
 	cs-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
 	status = "okay";
-	Flash@0 {
+	flash@0 {
 		compatible = "winbond,w25q128",
 		"jedec,spi-nor";
 		reg = <0x0>;
@@ -345,7 +345,7 @@
 &spi1 {
 	cs-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
 	status = "okay";
-	Flash@0 {
+	flash@0 {
 		compatible = "winbond,w25q128fw",
 		"jedec,spi-nor";
 		reg = <0x0>;
diff --git a/arch/arm/boot/dts/nuvoton-npcm750-pincfg-evb.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-pincfg-evb.dtsi
index 3b3806274adf..3b3806274adf 100644
--- a/arch/arm/boot/dts/nuvoton-npcm750-pincfg-evb.dtsi
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-pincfg-evb.dtsi
diff --git a/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus-pincfg.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus-pincfg.dtsi
index 230cb344b2e1..230cb344b2e1 100644
--- a/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus-pincfg.dtsi
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus-pincfg.dtsi
diff --git a/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus.dts
index 767e0ac0df7c..0c94e14d40e8 100644
--- a/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus.dts
@@ -100,18 +100,18 @@
 	pinctrl-0 = <&spi0cs1_pins>;
 	status = "okay";
 
-	spi-nor@0 {
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <0>;
 		spi-rx-bus-width = <2>;
 
-		partitions@80000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			bmc@0{
+			bmc@0 {
 				label = "bmc";
 				reg = <0x000000 0x2000000>;
 			};
@@ -120,7 +120,7 @@
 				reg = <0x0000000 0x80000>;
 				read-only;
 			};
-			u-boot-env@100000{
+			u-boot-env@100000 {
 				label = "u-boot-env";
 				reg = <0x00100000 0x40000>;
 			};
@@ -139,14 +139,14 @@
 		};
 	};
 
-	spi-nor@1 {
+	flash@1 {
 		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <1>;
 		npcm,fiu-rx-bus-width = <2>;
 
-		partitions@88000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -166,14 +166,14 @@
 	pinctrl-0 = <&spi3_pins>;
 	status = "okay";
 
-	spi-nor@0 {
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <0>;
 		spi-rx-bus-width = <2>;
 
-		partitions@A0000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -208,81 +208,81 @@
 &i2c1 {
 	status = "okay";
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x70>;
 		i2c-mux-idle-disconnect;
 
-		i2c_slot1a: i2c-bus@0 {
+		i2c_slot1a: i2c@0 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
 		};
 
-		i2c_slot1b: i2c-bus@1 {
+		i2c_slot1b: i2c@1 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <1>;
 		};
 
-		i2c_slot2a: i2c-bus@2 {
+		i2c_slot2a: i2c@2 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2>;
 		};
 
-		i2c_slot2b: i2c-bus@3 {
+		i2c_slot2b: i2c@3 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <3>;
 		};
 
-		i2c_slot3: i2c-bus@4 {
+		i2c_slot3: i2c@4 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <4>;
 		};
 
-		i2c_slot4: i2c-bus@5 {
+		i2c_slot4: i2c@5 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <5>;
 		};
 
-		i2c_slot5: i2c-bus@6 {
+		i2c_slot5: i2c@6 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <6>;
 		};
 	};
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9546";
 		reg = <0x71>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		i2c-mux-idle-disconnect;
 
-		i2c_m2_s1: i2c-bus@0 {
+		i2c_m2_s1: i2c@0 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
 		};
 
-		i2c_m2_s2: i2c-bus@1 {
+		i2c_m2_s2: i2c@1 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <1>;
 		};
-		i2c_m2_s3: i2c-bus@2 {
+		i2c_m2_s3: i2c@2 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2>;
 		};
 
-		i2c_m2_s4: i2c-bus@3 {
+		i2c_m2_s4: i2c@3 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <3>;
@@ -427,91 +427,91 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 		reset-gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
-		G1A_P0_0 {
+		g1a-p0-0-hog {
 			gpio-hog;
 			gpios = <0 0>;
 			output-high;
 			line-name = "TPM_BMC_ALERT_N";
 		};
-		G1A_P0_1 {
+		g1a-p0-1-hog {
 			gpio-hog;
 			gpios = <1 0>;
 			input;
 			line-name = "FM_BIOS_TOP_SWAP";
 		};
-		G1A_P0_2 {
+		g1a-p0-2-hog {
 			gpio-hog;
 			gpios = <2 0>;
 			input;
 			line-name = "FM_BIOS_PREFRB2_GOOD";
 		};
-		G1A_P0_3 {
+		g1a-p0-3-hog {
 			gpio-hog;
 			gpios = <3 0>;
 			input;
 			line-name = "BMC_SATAXPCIE_0TO3_SEL";
 		};
-		G1A_P0_4 {
+		g1a-p0-4-hog {
 			gpio-hog;
 			gpios = <4 0>;
 			input;
 			line-name = "BMC_SATAXPCIE_4TO7_SEL";
 		};
-		G1A_P0_5 {
+		g1a-p0-5-hog {
 			gpio-hog;
 			gpios = <5 0>;
 			output-low;
 			line-name = "FM_UV_ADR_TRIGGER_EN_N";
 		};
-		G1A_P0_6 {
+		g1a-p0-6-hog {
 			gpio-hog;
 			gpios = <6 0>;
 			input;
 			line-name = "RM_THROTTLE_EN_N";
 		};
-		G1A_P1_0 {
+		g1a-p1-0-hog {
 			gpio-hog;
 			gpios = <8 0>;
 			input;
 			line-name = "FM_BMC_TPM_PRES_N";
 		};
-		G1A_P1_1 {
+		g1a-p1-1-hog {
 			gpio-hog;
 			gpios = <9 0>;
 			input;
 			line-name = "FM_CPU0_SKTOCC_LVT3_N";
 		};
-		G1A_P1_2 {
+		g1a-p1-2-hog {
 			gpio-hog;
 			gpios = <10 0>;
 			input;
 			line-name = "FM_CPU1_SKTOCC_LVT3_N";
 		};
-		G1A_P1_3 {
+		g1a-p1-3-hog {
 			gpio-hog;
 			gpios = <11 0>;
 			input;
 			line-name = "PSU1_ALERT_N";
 		};
-		G1A_P1_4 {
+		g1a-p1-4-hog {
 			gpio-hog;
 			gpios = <12 0>;
 			input;
 			line-name = "PSU2_ALERT_N";
 		};
-		G1A_P1_5 {
+		g1a-p1-5-hog {
 			gpio-hog;
 			gpios = <13 0>;
 			input;
 			line-name = "H_CPU0_FAST_WAKE_LVT3_N";
 		};
-		G1A_P1_6 {
+		g1a-p1-6-hog {
 			gpio-hog;
 			gpios = <14 0>;
 			output-high;
 			line-name = "I2C_MUX1_RESET_N";
 		};
-		G1A_P1_7 {
+		g1a-p1-7-hog {
 			gpio-hog;
 			gpios = <15 0>;
 			input;
@@ -524,91 +524,91 @@
 		reg = <0x75>;
 		gpio-controller;
 		#gpio-cells = <2>;
-		G1B_P0_0 {
+		g1b-p0-0-hog {
 			gpio-hog;
 			gpios = <0 0>;
 			input;
 			line-name = "PVDDQ_ABC_PINALERT_N";
 		};
-		G1B_P0_1 {
+		g1b-p0-1-hog {
 			gpio-hog;
 			gpios = <1 0>;
 			input;
 			line-name = "PVDDQ_DEF_PINALERT_N";
 		};
-		G1B_P0_2 {
+		g1b-p0-2-hog {
 			gpio-hog;
 			gpios = <2 0>;
 			input;
 			line-name = "PVDDQ_GHJ_PINALERT_N";
 		};
-		G1B_P0_3 {
+		g1b-p0-3-hog {
 			gpio-hog;
 			gpios = <3 0>;
 			input;
 			line-name = "PVDDQ_KLM_PINALERT_N";
 		};
-		G1B_P0_5 {
+		g1b-p0-5-hog {
 			gpio-hog;
 			gpios = <5 0>;
 			input;
 			line-name = "FM_BOARD_REV_ID0";
 		};
-		G1B_P0_6 {
+		g1b-p0-6-hog {
 			gpio-hog;
 			gpios = <6 0>;
 			input;
 			line-name = "FM_BOARD_REV_ID1";
 		};
-		G1B_P0_7 {
+		g1b-p0-7-hog {
 			gpio-hog;
 			gpios = <7 0>;
 			input;
 			line-name = "FM_BOARD_REV_ID2";
 		};
-		G1B_P1_0 {
+		g1b-p1-0-hog {
 			gpio-hog;
 			gpios = <8 0>;
 			input;
 			line-name = "FM_OC_DETECT_EN_N";
 		};
-		G1B_P1_1 {
+		g1b-p1-1-hog {
 			gpio-hog;
 			gpios = <9 0>;
 			input;
 			line-name = "FM_FLASH_DESC_OVERRIDE";
 		};
-		G1B_P1_2 {
+		g1b-p1-2-hog {
 			gpio-hog;
 			gpios = <10 0>;
 			output-low;
 			line-name = "FP_PWR_ID_LED_N";
 		};
-		G1B_P1_3 {
+		g1b-p1-3-hog {
 			gpio-hog;
 			gpios = <11 0>;
 			output-low;
 			line-name = "BMC_LED_PWR_GRN";
 		};
-		G1B_P1_4 {
+		g1b-p1-4-hog {
 			gpio-hog;
 			gpios = <12 0>;
 			output-low;
 			line-name = "BMC_LED_PWR_AMBER";
 		};
-		G1B_P1_5 {
+		g1b-p1-5-hog {
 			gpio-hog;
 			gpios = <13 0>;
 			output-high;
 			line-name = "FM_BMC_FAULT_LED_N";
 		};
-		G1B_P1_6 {
+		g1b-p1-6-hog {
 			gpio-hog;
 			gpios = <14 0>;
 			output-high;
 			line-name = "FM_CPLD_BMC_PWRDN_N";
 		};
-		G1B_P1_7 {
+		g1b-p1-7-hog {
 			gpio-hog;
 			gpios = <15 0>;
 			output-high;
@@ -626,91 +626,91 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 		reset-gpios = <&gpio5 28 GPIO_ACTIVE_LOW>;
-		G2A_P0_0 {
+		g2a-p0-0-hog {
 			gpio-hog;
 			gpios = <0 0>;
 			output-high;
 			line-name = "BMC_PON_RST_REQ_N";
 		};
-		G2A_P0_1 {
+		g2a-p0-1-hog {
 			gpio-hog;
 			gpios = <1 0>;
 			output-high;
 			line-name = "BMC_RST_IND_REQ_N";
 		};
-		G2A_P0_2 {
+		g2a-p0-2-hog {
 			gpio-hog;
 			gpios = <2 0>;
 			input;
 			line-name = "RST_BMC_RTCRST";
 		};
-		G2A_P0_3 {
+		g2a-p0-3-hog {
 			gpio-hog;
 			gpios = <3 0>;
 			output-high;
 			line-name = "FM_BMC_PWRBTN_OUT_N";
 		};
-		G2A_P0_4 {
+		g2a-p0-4-hog {
 			gpio-hog;
 			gpios = <4 0>;
 			output-high;
 			line-name = "RST_BMC_SYSRST_BTN_OUT_N";
 		};
-		G2A_P0_5 {
+		g2a-p0-5-hog {
 			gpio-hog;
 			gpios = <5 0>;
 			output-high;
 			line-name = "FM_BATTERY_SENSE_EN_N";
 		};
-		G2A_P0_6 {
+		g2a-p0-6-hog {
 			gpio-hog;
 			gpios = <6 0>;
 			output-high;
 			line-name = "FM_BMC_READY_N";
 		};
-		G2A_P0_7 {
+		g2a-p0-7-hog {
 			gpio-hog;
 			gpios = <7 0>;
 			input;
 			line-name = "IRQ_BMC_PCH_SMI_LPC_N";
 		};
-		G2A_P1_0 {
+		g2a-p1-0-hog {
 			gpio-hog;
 			gpios = <8 0>;
 			input;
 			line-name = "FM_SLOT4_CFG0";
 		};
-		G2A_P1_1 {
+		g2a-p1-1-hog {
 			gpio-hog;
 			gpios = <9 0>;
 			input;
 			line-name = "FM_SLOT4_CFG1";
 		};
-		G2A_P1_2 {
+		g2a-p1-2-hog {
 			gpio-hog;
 			gpios = <10 0>;
 			input;
 			line-name = "FM_NVDIMM_EVENT_N";
 		};
-		G2A_P1_3 {
+		g2a-p1-3-hog {
 			gpio-hog;
 			gpios = <11 0>;
 			input;
 			line-name = "PSU1_BLADE_EN_N";
 		};
-		G2A_P1_4 {
+		g2a-p1-4-hog {
 			gpio-hog;
 			gpios = <12 0>;
 			input;
 			line-name = "BMC_PCH_FNM";
 		};
-		G2A_P1_5 {
+		g2a-p1-5-hog {
 			gpio-hog;
 			gpios = <13 0>;
 			input;
 			line-name = "FM_SOL_UART_CH_SEL";
 		};
-		G2A_P1_6 {
+		g2a-p1-6-hog {
 			gpio-hog;
 			gpios = <14 0>;
 			input;
@@ -723,91 +723,91 @@
 		reg = <0x75>;
 		gpio-controller;
 		#gpio-cells = <2>;
-		G2B_P0_0 {
+		g2b-p0-0-hog {
 			gpio-hog;
 			gpios = <0 0>;
 			input;
 			line-name = "FM_CPU_MSMI_LVT3_N";
 		};
-		G2B_P0_1 {
+		g2b-p0-1-hog {
 			gpio-hog;
 			gpios = <1 0>;
 			input;
 			line-name = "FM_BIOS_MRC_DEBUG_MSG_DIS";
 		};
-		G2B_P0_2 {
+		g2b-p0-2-hog {
 			gpio-hog;
 			gpios = <2 0>;
 			input;
 			line-name = "FM_CPU1_DISABLE_BMC_N";
 		};
-		G2B_P0_3 {
+		g2b-p0-3-hog {
 			gpio-hog;
 			gpios = <3 0>;
 			output-low;
 			line-name = "BMC_JTAG_SELECT";
 		};
-		G2B_P0_4 {
+		g2b-p0-4-hog {
 			gpio-hog;
 			gpios = <4 0>;
 			output-high;
 			line-name = "PECI_MUX_SELECT";
 		};
-		G2B_P0_5 {
+		g2b-p0-5-hog {
 			gpio-hog;
 			gpios = <5 0>;
 			output-high;
 			line-name = "I2C_MUX2_RESET_N";
 		};
-		G2B_P0_6 {
+		g2b-p0-6-hog {
 			gpio-hog;
 			gpios = <6 0>;
 			input;
 			line-name = "FM_BMC_CPLD_PSU2_ON";
 		};
-		G2B_P0_7 {
+		g2b-p0-7-hog {
 			gpio-hog;
 			gpios = <7 0>;
 			output-high;
 			line-name = "PSU2_ALERT_EN_N";
 		};
-		G2B_P1_0 {
+		g2b-p1-0-hog {
 			gpio-hog;
 			gpios = <8 0>;
 			output-high;
 			line-name = "FM_CPU_BMC_INIT";
 		};
-		G2B_P1_1 {
+		g2b-p1-1-hog {
 			gpio-hog;
 			gpios = <9 0>;
 			output-high;
 			line-name = "IRQ_BMC_PCH_SCI_LPC_N";
 		};
-		G2B_P1_2 {
+		g2b-p1-2-hog {
 			gpio-hog;
 			gpios = <10 0>;
 			output-low;
 			line-name = "PMB_ALERT_EN_N";
 		};
-		G2B_P1_3 {
+		g2b-p1-3-hog {
 			gpio-hog;
 			gpios = <11 0>;
 			output-high;
 			line-name = "FM_FAST_PROCHOT_EN_N";
 		};
-		G2B_P1_4 {
+		g2b-p1-4-hog {
 			gpio-hog;
 			gpios = <12 0>;
 			output-high;
 			line-name = "BMC_NVDIMM_PRSNT_N";
 		};
-		G2B_P1_5 {
+		g2b-p1-5-hog {
 			gpio-hog;
 			gpios = <13 0>;
 			output-low;
 			line-name = "FM_BACKUP_BIOS_SEL_H_BMC";
 		};
-		G2B_P1_6 {
+		g2b-p1-6-hog {
 			gpio-hog;
 			gpios = <14 0>;
 			output-high;
@@ -824,7 +824,7 @@
 		reg = <0x4a>;
 		status = "okay";
 	};
-	m24128_fru@51 {
+	eeprom@51 {
 		compatible = "atmel,24c128";
 		reg = <0x51>;
 		pagesize = <64>;
diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm750.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750.dtsi
new file mode 100644
index 000000000000..65fe3a180bb1
--- /dev/null
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750.dtsi
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Nuvoton Technology tomer.maimon@nuvoton.com
+// Copyright 2018 Google, Inc.
+
+#include "nuvoton-common-npcm7xx.dtsi"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "nuvoton,npcm750-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			clocks = <&clk NPCM7XX_CLK_CPU>;
+			clock-names = "clk_cpu";
+			reg = <0>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			clocks = <&clk NPCM7XX_CLK_CPU>;
+			clock-names = "clk_cpu";
+			reg = <1>;
+			next-level-cache = <&l2>;
+		};
+	};
+
+	soc {
+		timer@3fe600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x3fe600 0x20>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&clk NPCM7XX_CLK_AHB>;
+		};
+	};
+
+	ahb {
+		gmac1: ethernet@f0804000 {
+			device_type = "network";
+			compatible = "snps,dwmac";
+			reg = <0xf0804000 0x2000>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			ethernet = <1>;
+			clocks = <&clk_rg2refck>, <&clk NPCM7XX_CLK_AHB>;
+			clock-names = "stmmaceth", "clk_gmac";
+			pinctrl-names = "default";
+			pinctrl-0 = <&rg2_pins
+					&rg2mdio_pins>;
+			status = "disabled";
+		};
+
+		udc0: usb@f0830000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0830000 0x1000
+			       0xfffd0000 0x800>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
+
+		udc1: usb@f0831000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0831000 0x1000
+			       0xfffd0800 0x800>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
+
+		udc2: usb@f0832000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0832000 0x1000
+			       0xfffd1000 0x800>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
+
+		udc3: usb@f0833000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0833000 0x1000
+			       0xfffd1800 0x800>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
+
+		udc4: usb@f0834000 {
+			compatible = "nuvoton,npcm750-udc";
+			reg = <0xf0834000 0x1000
+			       0xfffd2000 0x800>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk NPCM7XX_CLK_SU>;
+			clock-names = "clk_usb_bridge";
+			phys = <&udc0_phy>;
+			phy_type = "utmi_wide";
+			dr_mode = "peripheral";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts b/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts
new file mode 100644
index 000000000000..edb907f740bf
--- /dev/null
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+// Copyright 2021 Jonathan Neuschäfer
+
+/dts-v1/;
+
+/* The last 16 MiB are dedicated to the GPU */
+/memreserve/ 0x07000000 0x01000000;
+
+#include "nuvoton-wpcm450.dtsi"
+
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Supermicro X9SCi-LN4F BMC";
+	compatible = "supermicro,x9sci-ln4f-bmc", "nuvoton,wpcm450";
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x08000000>; /* 128 MiB */
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_pins>;
+
+		button-uid {
+			label = "UID button";
+			linux,code = <KEY_HOME>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		led-uid {
+			label = "UID";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-heartbeat {
+			label = "heartbeat";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&fiu {
+	status = "okay";
+
+	flash@0 {
+		reg = <0>;
+		compatible = "jedec,spi-nor";
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+		/* 0 */ "", "host-reset-control-n", "", "", "", "", "", "",
+		/* 8 */ "", "", "", "", "power-chassis-control-n", "", "uid-button", "";
+};
+
+&gpio1 {
+	gpio-line-names =
+		/* 0 */ "", "", "", "", "led-heartbeat", "", "", "led-uid",
+		/* 8 */ "", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		/* 0 */ "", "", "", "", "", "", "", "",
+		/* 8 */ "", "", "", "", "", "", "", "power-chassis-good";
+};
+
+&pinctrl {
+	key_pins: mux-keys {
+		groups = "gspi", "sspi";
+		function = "gpio";
+	};
+
+	led_pins: mux-leds {
+		groups = "hg3", "hg0", "pwm4";
+		function = "gpio";
+	};
+};
+
+&serial0 {
+	/*
+	 * Debug serial port. TX is exposed on the right pad of unpopulated
+	 * resistor R1247, RX on the right pad of R1162.
+	 */
+	status = "okay";
+};
+
+&serial1 {
+	/* "Serial over LAN" port. Connected to ttyS2 of the host system. */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi
new file mode 100644
index 000000000000..6e1f0f164cb4
--- /dev/null
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi
@@ -0,0 +1,495 @@
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+// Copyright 2021 Jonathan Neuschäfer
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "nuvoton,wpcm450";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
+		gpio5 = &gpio5;
+		gpio6 = &gpio6;
+		gpio7 = &gpio7;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	clk24m: clock-24mhz {
+		/* 24 MHz dummy clock */
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		#clock-cells = <0>;
+	};
+
+	refclk: clock-48mhz {
+		/* 48 MHz reference oscillator */
+		compatible = "fixed-clock";
+		clock-output-names = "ref";
+		clock-frequency = <48000000>;
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&aic>;
+		ranges;
+
+		gcr: syscon@b0000000 {
+			compatible = "nuvoton,wpcm450-gcr", "syscon", "simple-mfd";
+			reg = <0xb0000000 0x200>;
+		};
+
+		clk: clock-controller@b0000200 {
+			compatible = "nuvoton,wpcm450-clk";
+			reg = <0xb0000200 0x100>;
+			clocks = <&refclk>;
+			clock-names = "ref";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		serial0: serial@b8000000 {
+			compatible = "nuvoton,wpcm450-uart";
+			reg = <0xb8000000 0x20>;
+			reg-shift = <2>;
+			interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk24m>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&bsp_pins>;
+			status = "disabled";
+		};
+
+		serial1: serial@b8000100 {
+			compatible = "nuvoton,wpcm450-uart";
+			reg = <0xb8000100 0x20>;
+			reg-shift = <2>;
+			interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk24m>;
+			status = "disabled";
+		};
+
+		timer0: timer@b8001000 {
+			compatible = "nuvoton,wpcm450-timer";
+			interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0xb8001000 0x1c>;
+			clocks = <&clk24m>;
+		};
+
+		watchdog0: watchdog@b800101c {
+			compatible = "nuvoton,wpcm450-wdt";
+			interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0xb800101c 0x4>;
+			clocks = <&clk24m>;
+		};
+
+		aic: interrupt-controller@b8002000 {
+			compatible = "nuvoton,wpcm450-aic";
+			reg = <0xb8002000 0x1000>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pinctrl: pinctrl@b8003000 {
+			compatible = "nuvoton,wpcm450-pinctrl";
+			reg = <0xb8003000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio0: gpio@0 {
+				reg = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
+					     <3 IRQ_TYPE_LEVEL_HIGH>,
+					     <4 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+			};
+
+			gpio1: gpio@1 {
+				reg = <1>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+			};
+
+			gpio2: gpio@2 {
+				reg = <2>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio3: gpio@3 {
+				reg = <3>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio4: gpio@4 {
+				reg = <4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio5: gpio@5 {
+				reg = <5>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio6: gpio@6 {
+				reg = <6>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio7: gpio@7 {
+				reg = <7>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			smb3_pins: mux-smb3 {
+				groups = "smb3";
+				function = "smb3";
+			};
+
+			smb4_pins: mux-smb4 {
+				groups = "smb4";
+				function = "smb4";
+			};
+
+			smb5_pins: mux-smb5 {
+				groups = "smb5";
+				function = "smb5";
+			};
+
+			scs1_pins: mux-scs1 {
+				groups = "scs1";
+				function = "scs1";
+			};
+
+			scs2_pins: mux-scs2 {
+				groups = "scs2";
+				function = "scs2";
+			};
+
+			scs3_pins: mux-scs3 {
+				groups = "scs3";
+				function = "scs3";
+			};
+
+			smb0_pins: mux-smb0 {
+				groups = "smb0";
+				function = "smb0";
+			};
+
+			smb1_pins: mux-smb1 {
+				groups = "smb1";
+				function = "smb1";
+			};
+
+			smb2_pins: mux-smb2 {
+				groups = "smb2";
+				function = "smb2";
+			};
+
+			bsp_pins: mux-bsp {
+				groups = "bsp";
+				function = "bsp";
+			};
+
+			hsp1_pins: mux-hsp1 {
+				groups = "hsp1";
+				function = "hsp1";
+			};
+
+			hsp2_pins: mux-hsp2 {
+				groups = "hsp2";
+				function = "hsp2";
+			};
+
+			r1err_pins: mux-r1err {
+				groups = "r1err";
+				function = "r1err";
+			};
+
+			r1md_pins: mux-r1md {
+				groups = "r1md";
+				function = "r1md";
+			};
+
+			rmii2_pins: mux-rmii2 {
+				groups = "rmii2";
+				function = "rmii2";
+			};
+
+			r2err_pins: mux-r2err {
+				groups = "r2err";
+				function = "r2err";
+			};
+
+			r2md_pins: mux-r2md {
+				groups = "r2md";
+				function = "r2md";
+			};
+
+			kbcc_pins: mux-kbcc {
+				groups = "kbcc";
+				function = "kbcc";
+			};
+
+			dvo0_pins: mux-dvo0 {
+				groups = "dvo";
+				function = "dvo0";
+			};
+
+			dvo3_pins: mux-dvo3 {
+				groups = "dvo";
+				function = "dvo3";
+			};
+
+			clko_pins: mux-clko {
+				groups = "clko";
+				function = "clko";
+			};
+
+			smi_pins: mux-smi {
+				groups = "smi";
+				function = "smi";
+			};
+
+			uinc_pins: mux-uinc {
+				groups = "uinc";
+				function = "uinc";
+			};
+
+			gspi_pins: mux-gspi {
+				groups = "gspi";
+				function = "gspi";
+			};
+
+			mben_pins: mux-mben {
+				groups = "mben";
+				function = "mben";
+			};
+
+			xcs2_pins: mux-xcs2 {
+				groups = "xcs2";
+				function = "xcs2";
+			};
+
+			xcs1_pins: mux-xcs1 {
+				groups = "xcs1";
+				function = "xcs1";
+			};
+
+			sdio_pins: mux-sdio {
+				groups = "sdio";
+				function = "sdio";
+			};
+
+			sspi_pins: mux-sspi {
+				groups = "sspi";
+				function = "sspi";
+			};
+
+			fi0_pins: mux-fi0 {
+				groups = "fi0";
+				function = "fi0";
+			};
+
+			fi1_pins: mux-fi1 {
+				groups = "fi1";
+				function = "fi1";
+			};
+
+			fi2_pins: mux-fi2 {
+				groups = "fi2";
+				function = "fi2";
+			};
+
+			fi3_pins: mux-fi3 {
+				groups = "fi3";
+				function = "fi3";
+			};
+
+			fi4_pins: mux-fi4 {
+				groups = "fi4";
+				function = "fi4";
+			};
+
+			fi5_pins: mux-fi5 {
+				groups = "fi5";
+				function = "fi5";
+			};
+
+			fi6_pins: mux-fi6 {
+				groups = "fi6";
+				function = "fi6";
+			};
+
+			fi7_pins: mux-fi7 {
+				groups = "fi7";
+				function = "fi7";
+			};
+
+			fi8_pins: mux-fi8 {
+				groups = "fi8";
+				function = "fi8";
+			};
+
+			fi9_pins: mux-fi9 {
+				groups = "fi9";
+				function = "fi9";
+			};
+
+			fi10_pins: mux-fi10 {
+				groups = "fi10";
+				function = "fi10";
+			};
+
+			fi11_pins: mux-fi11 {
+				groups = "fi11";
+				function = "fi11";
+			};
+
+			fi12_pins: mux-fi12 {
+				groups = "fi12";
+				function = "fi12";
+			};
+
+			fi13_pins: mux-fi13 {
+				groups = "fi13";
+				function = "fi13";
+			};
+
+			fi14_pins: mux-fi14 {
+				groups = "fi14";
+				function = "fi14";
+			};
+
+			fi15_pins: mux-fi15 {
+				groups = "fi15";
+				function = "fi15";
+			};
+
+			pwm0_pins: mux-pwm0 {
+				groups = "pwm0";
+				function = "pwm0";
+			};
+
+			pwm1_pins: mux-pwm1 {
+				groups = "pwm1";
+				function = "pwm1";
+			};
+
+			pwm2_pins: mux-pwm2 {
+				groups = "pwm2";
+				function = "pwm2";
+			};
+
+			pwm3_pins: mux-pwm3 {
+				groups = "pwm3";
+				function = "pwm3";
+			};
+
+			pwm4_pins: mux-pwm4 {
+				groups = "pwm4";
+				function = "pwm4";
+			};
+
+			pwm5_pins: mux-pwm5 {
+				groups = "pwm5";
+				function = "pwm5";
+			};
+
+			pwm6_pins: mux-pwm6 {
+				groups = "pwm6";
+				function = "pwm6";
+			};
+
+			pwm7_pins: mux-pwm7 {
+				groups = "pwm7";
+				function = "pwm7";
+			};
+
+			hg0_pins: mux-hg0 {
+				groups = "hg0";
+				function = "hg0";
+			};
+
+			hg1_pins: mux-hg1 {
+				groups = "hg1";
+				function = "hg1";
+			};
+
+			hg2_pins: mux-hg2 {
+				groups = "hg2";
+				function = "hg2";
+			};
+
+			hg3_pins: mux-hg3 {
+				groups = "hg3";
+				function = "hg3";
+			};
+
+			hg4_pins: mux-hg4 {
+				groups = "hg4";
+				function = "hg4";
+			};
+
+			hg5_pins: mux-hg5 {
+				groups = "hg5";
+				function = "hg5";
+			};
+
+			hg6_pins: mux-hg6 {
+				groups = "hg6";
+				function = "hg6";
+			};
+
+			hg7_pins: mux-hg7 {
+				groups = "hg7";
+				function = "hg7";
+			};
+		};
+
+		fiu: spi-controller@c8000000 {
+			compatible = "nuvoton,wpcm450-fiu";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xc8000000 0x1000>, <0xc0000000 0x4000000>;
+			reg-names = "control", "memory";
+			clocks = <&clk 0>;
+			nuvoton,shm = <&shm>;
+			status = "disabled";
+		};
+
+		shm: syscon@c8001000 {
+			compatible = "nuvoton,wpcm450-shm", "syscon";
+			reg = <0xc8001000 0x1000>;
+			reg-io-width = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/Makefile b/arch/arm/boot/dts/nvidia/Makefile
new file mode 100644
index 000000000000..faf591485ada
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/Makefile
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_TEGRA_114_SOC) += \
+	tegra114-asus-tf701t.dtb \
+	tegra114-dalmore.dtb \
+	tegra114-roth.dtb \
+	tegra114-tn7.dtb
+dtb-$(CONFIG_ARCH_TEGRA_124_SOC) += \
+	tegra124-apalis-eval.dtb \
+	tegra124-apalis-v1.2-eval.dtb \
+	tegra124-jetson-tk1.dtb \
+	tegra124-nyan-big.dtb \
+	tegra124-nyan-big-fhd.dtb \
+	tegra124-nyan-blaze.dtb \
+	tegra124-venice2.dtb \
+	tegra124-xiaomi-mocha.dtb
+dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
+	tegra20-acer-a500-picasso.dtb \
+	tegra20-asus-sl101.dtb \
+	tegra20-asus-tf101.dtb \
+	tegra20-harmony.dtb \
+	tegra20-colibri-eval-v3.dtb \
+	tegra20-colibri-iris.dtb \
+	tegra20-medcom-wide.dtb \
+	tegra20-paz00.dtb \
+	tegra20-plutux.dtb \
+	tegra20-seaboard.dtb \
+	tegra20-tec.dtb \
+	tegra20-trimslice.dtb \
+	tegra20-ventana.dtb
+dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \
+	tegra30-apalis-eval.dtb \
+	tegra30-apalis-v1.1-eval.dtb \
+	tegra30-asus-nexus7-grouper-PM269.dtb \
+	tegra30-asus-nexus7-grouper-E1565.dtb \
+	tegra30-asus-nexus7-tilapia-E1565.dtb \
+	tegra30-asus-p1801-t.dtb \
+	tegra30-asus-tf201.dtb \
+	tegra30-asus-tf300t.dtb \
+	tegra30-asus-tf300tg.dtb \
+	tegra30-asus-tf300tl.dtb \
+	tegra30-asus-tf600t.dtb \
+	tegra30-asus-tf700t.dtb \
+	tegra30-beaver.dtb \
+	tegra30-cardhu-a02.dtb \
+	tegra30-cardhu-a04.dtb \
+	tegra30-colibri-eval-v3.dtb \
+	tegra30-lg-p880.dtb \
+	tegra30-lg-p895.dtb \
+	tegra30-ouya.dtb \
+	tegra30-pegatron-chagall.dtb
diff --git a/arch/arm/boot/dts/nvidia/tegra114-asus-tf701t.dts b/arch/arm/boot/dts/nvidia/tegra114-asus-tf701t.dts
new file mode 100644
index 000000000000..f02e2cf65fe8
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra114-asus-tf701t.dts
@@ -0,0 +1,1963 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+
+#include "tegra114.dtsi"
+
+/ {
+	model = "Asus Transformer Pad TF701T";
+	compatible = "asus,tf701t", "nvidia,tegra114";
+	chassis-type = "convertible";
+
+	aliases {
+		mmc0 = "/mmc@78000600"; /* eMMC */
+		mmc1 = "/mmc@78000400"; /* uSD slot */
+		mmc2 = "/mmc@78000000"; /* WiFi */
+
+		rtc0 = &palmas;
+		rtc1 = "/rtc@7000e000";
+
+		serial0 = &uartd; /* Console */
+		serial1 = &uartc; /* Bluetooth */
+		serial2 = &uartb; /* GPS */
+	};
+
+	firmware {
+		trusted-foundations {
+			compatible = "tlm,trusted-foundations";
+			tlm,version-major = <2>;
+			tlm,version-minor = <8>;
+		};
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		linux,cma@80000000 {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0x80000000 0x30000000>;
+			size = <0x10000000>;
+			linux,cma-default;
+			reusable;
+		};
+
+		trustzone@bfe00000 {
+			reg = <0xbfe00000 0x200000>;
+			no-map;
+		};
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			status = "okay";
+
+			hdmi-supply = <&hdmi_5v0_sys>;
+			pll-supply = <&avdd_hdmi_pll>;
+			vdd-supply = <&avdd_hdmi>;
+
+			port {
+				hdmi_out: endpoint {
+					remote-endpoint = <&connector_in>;
+				};
+			};
+		};
+
+		dsi@54300000 {
+			status = "okay";
+
+			avdd-dsi-csi-supply = <&avdd_dsi_csi>;
+
+			nvidia,ganged-mode = <&dsib>;
+
+			panel_primary: panel@0 {
+				compatible = "sharp,lq101r1sx01";
+				reg = <0>;
+
+				link2 = <&panel_secondary>;
+
+				power-supply = <&dvdd_1v8_lcd>;
+				backlight = <&backlight>;
+			};
+		};
+
+		dsi@54400000 {
+			status = "okay";
+
+			avdd-dsi-csi-supply = <&avdd_dsi_csi>;
+
+			panel_secondary: panel@0 {
+				compatible = "sharp,lq101r1sx01";
+				reg = <0>;
+			};
+		};
+	};
+
+	vde@6001a000 {
+		assigned-clocks = <&tegra_car TEGRA114_CLK_VDE>;
+		assigned-clock-parents = <&tegra_car TEGRA114_CLK_PLL_P>;
+		assigned-clock-rates = <408000000>;
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* WLAN SDIO pinmux */
+			sdmmc1-clk {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc1-cmd {
+				nvidia,pins = "sdmmc1_cmd_pz1",
+					      "sdmmc1_dat0_py7",
+					      "sdmmc1_dat1_py6",
+					      "sdmmc1_dat2_py5",
+					      "sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			wlan-power {
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			wlan-reset {
+				nvidia,pins = "gpio_x7_aud_px7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			wlan-host-wake {
+				nvidia,pins = "pu5";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			wlan-3v3-com {
+				nvidia,pins = "pu1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* UART-A pinmux */
+			uarta-cts {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			uarta-rts {
+				nvidia,pins = "kb_row9_ps1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* GNSS UART-B pinmux */
+			uartb-cts {
+				nvidia,pins = "uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			uartb-rts {
+				nvidia,pins = "uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			uartb-rxd {
+				nvidia,pins = "uart2_rxd_pc3";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			uartb-txd {
+				nvidia,pins = "uart2_txd_pc2";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Bluetooth UART-C pinmux */
+			uartc-cts-rxd {
+				nvidia,pins = "uart3_cts_n_pa1",
+					      "uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			uartc-rts-txd {
+				nvidia,pins = "uart3_rts_n_pc0",
+					      "uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			bt-shutdown {
+				nvidia,pins = "kb_col6_pq6",
+					      "kb_col7_pq7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			bt-dev-wake {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			bt-host-wake {
+				nvidia,pins = "pu6";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			bt-pcm-dap4-out {
+				nvidia,pins = "dap4_fs_pp4",
+					      "dap4_dout_pp6",
+					      "dap4_sclk_pp7";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			bt-pcm-dap4-in {
+				nvidia,pins = "dap4_din_pp5";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* UART-D pinmux */
+			uartd-cts {
+				nvidia,pins = "gmi_a17_pb0";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			uartd-rts {
+				nvidia,pins = "gmi_a16_pj7",
+					      "gmi_a19_pk7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* MicroSD pinmux */
+			sdmmc3-clk {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc3-data {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+					      "sdmmc3_dat0_pb7",
+					      "sdmmc3_dat1_pb6",
+					      "sdmmc3_dat2_pb5",
+					      "sdmmc3_dat3_pb4",
+					      "kb_col4_pq4",
+					      "sdmmc3_cd_n_pv2",
+					      "sdmmc3_clk_lb_out_pee4",
+					      "sdmmc3_clk_lb_in_pee5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			microsd-pwr {
+				nvidia,pins = "gmi_clk_pk1";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* EMMC pinmux */
+			sdmmc4-clk-cmd {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc4-data {
+				nvidia,pins = "sdmmc4_cmd_pt7",
+					      "sdmmc4_dat0_paa0",
+					      "sdmmc4_dat1_paa1",
+					      "sdmmc4_dat2_paa2",
+					      "sdmmc4_dat3_paa3",
+					      "sdmmc4_dat4_paa4",
+					      "sdmmc4_dat5_paa5",
+					      "sdmmc4_dat6_paa6",
+					      "sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* I2C pinmux */
+			gen1-i2c {
+				nvidia,pins = "gen1_i2c_scl_pc4",
+					      "gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+
+			gen2-i2c {
+				nvidia,pins = "gen2_i2c_scl_pt5",
+					      "gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+
+			cam-i2c {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+					      "cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			
+			ddc-i2c {
+				nvidia,pins = "ddc_scl_pv4",
+					      "ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+
+			pwr-i2c {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+					      "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* SPI pinmux */
+			spi1-out {
+				nvidia,pins = "ulpi_clk_py0",
+					      "ulpi_nxt_py2",
+					      "ulpi_stp_py3";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spi1-in {
+				nvidia,pins = "ulpi_dir_py1";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			spi2 {
+				nvidia,pins = "ulpi_data4_po5",
+					      "ulpi_data7_po0";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			spi4-out {
+				nvidia,pins = "gmi_ad6_pg6",
+					      "gmi_wr_n_pi0";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spi4-in {
+				nvidia,pins = "gmi_ad5_pg5",
+					      "gmi_ad7_pg7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* GPIO keys pinmux */
+			hall-switch {
+				nvidia,pins = "ulpi_data4_po5";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			lineout-switch {
+				nvidia,pins = "gpio_x5_aud_px5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			power-key {
+				nvidia,pins = "kb_col0_pq0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			volume-keys {
+				nvidia,pins = "kb_row1_pr1",
+					      "kb_row2_pr2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Sensors pinmux */
+			nct-irq {
+				nvidia,pins = "ulpi_data3_po4";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			mpu-irq {
+				nvidia,pins = "kb_row3_pr3";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* HDMI pinmux */
+			hdmi-hpd {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			hdmi-en {
+				nvidia,pins = "dap3_dout_pp2";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			hdmi-cec {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* LED pinmux */
+			backlight-pwm {
+				nvidia,pins = "gmi_ad9_ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			backlight-en {
+				nvidia,pins = "gmi_ad10_ph2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Touchscreen pinmux */
+			touch-irq {
+				nvidia,pins = "gmi_cs4_n_pk2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			touch-rst {
+				nvidia,pins = "gmi_cs3_n_pk4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			touch-pwr {
+				nvidia,pins = "gmi_ad8_ph0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			touch-vio {
+				nvidia,pins = "gmi_ad12_ph4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* AUDIO pinmux */
+			audio-ldo1 {
+				nvidia,pins = "sdmmc1_wp_n_pv3";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			hp-detect {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap-i2s0-in {
+				nvidia,pins = "dap1_din_pn1";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap-i2s0-out {
+				nvidia,pins = "dap1_dout_pn2",
+					      "dap1_fs_pn0",
+					      "dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			dap-i2s1-in {
+				nvidia,pins = "dap2_din_pa4";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap-i2s1-out {
+				nvidia,pins = "dap2_dout_pa5",
+					      "dap2_fs_pa2",
+					      "dap2_sclk_pa3";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			dap-i2s2-in {
+				nvidia,pins = "dap3_fs_pp0",
+					      "dap3_sclk_pp3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap-i2s2-out {
+				nvidia,pins = "dap3_din_pp1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spdif-in {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spdif-out {
+				nvidia,pins = "spdif_out_pk5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* AsusEC pinmux */
+			ec-irq {
+				nvidia,pins = "kb_col5_pq5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ec-req {
+				nvidia,pins = "kb_col2_pq2";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			hotplug-i2c {
+				nvidia,pins = "ulpi_data7_po0";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ps2-irq {
+				nvidia,pins = "gpio_w2_aud_pw2";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kbd-irq {
+				nvidia,pins = "gmi_cs0_n_pj0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dvfs-pin {
+				nvidia,pins = "dvfs_pwm_px0",
+					      "dvfs_clk_px2";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Core pinmux */
+			clk-32k-out {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sys-clk-req {
+				nvidia,pins = "sys_clk_req_pz5";
+				nvidia,function = "sysclk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			core-pwr-req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "pwron";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			cpu-pwr-req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "cpu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pwr-int-n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk-32k-in {
+				nvidia,pins = "clk_32k_in";
+				nvidia,function = "clk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			reset-out-n {
+				nvidia,pins = "reset_out_n";
+				nvidia,function = "reset_out_n";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* ULPI pinmux */
+			ulpi-data0-6 {
+				nvidia,pins = "ulpi_data0_po1",
+					      "ulpi_data6_po7";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ulpi-data1-5 {
+				nvidia,pins = "ulpi_data1_po2",
+					      "ulpi_data5_po6";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ulpi-data2-3 {
+				nvidia,pins = "ulpi_data2_po3",
+					      "ulpi_data3_po4";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* PORT V */
+			pv0-gpio {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pv1-gpio {
+				nvidia,pins = "pv1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* PORT U */
+			pu0-gpio {
+				nvidia,pins = "pu0";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pu2-gpio {
+				nvidia,pins = "pu2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* PWM pinmux */
+			pwm0 {
+				nvidia,pins = "pu3";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pwm1 {
+				nvidia,pins = "pu4";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* EXTPERIPH pinmux */
+			clk1-out {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk2-out {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "extperiph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk3-out {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk1-req {
+				nvidia,pins = "clk1_req_pee2";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* GMI pinmux */
+			gmi-wp-n {
+				nvidia,pins = "gmi_wp_n_pc7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi-adv {
+				nvidia,pins = "gmi_adv_n_pk0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi-ad0-ad1 {
+				nvidia,pins = "gmi_ad0_pg0",
+					      "gmi_ad1_pg1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi-ad2-ad3 {
+				nvidia,pins = "gmi_ad2_pg2",
+					      "gmi_ad3_pg3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi-iordy {
+				nvidia,pins = "gmi_iordy_pi5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi-a18 {
+				nvidia,pins = "gmi_a18_pb1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi-wait {
+				nvidia,pins = "gmi_wait_pi7";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi-cs6-n {
+				nvidia,pins = "gmi_cs6_n_pi3";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi-cs7-n {
+				nvidia,pins = "gmi_cs7_n_pi6";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi-dqs-p {
+				nvidia,pins = "gmi_dqs_p_pj3";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi-cs2-ad {
+				nvidia,pins = "gmi_cs2_n_pk3",
+					      "gmi_ad14_ph6",
+					      "gmi_ad15_ph7";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi-cs4-clk {
+				nvidia,pins = "gmi_cs4_n_pk2",
+					      "gmi_clk_lb";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi-ad11 {
+				nvidia,pins = "gmi_ad11_ph3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi-cs1-oe {
+				nvidia,pins = "gmi_cs1_n_pj2",
+					      "gmi_oe_n_pi1";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi-ad4 {
+				nvidia,pins = "gmi_ad4_pg4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi-ad13 {
+				nvidia,pins = "gmi_ad13_ph5";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi-rst-n {
+				nvidia,pins = "gmi_rst_n_pi4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* PORT CC */
+			pcc-gpio {
+				nvidia,pins = "pcc1", "pcc2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* PORT BB */
+			pbb3-gpio {
+				nvidia,pins = "pbb3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pbb4-5-6-gpio {
+				nvidia,pins = "pbb4", "pbb5", "pbb6";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb7-gpio {
+				nvidia,pins = "pbb7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* KBC pinmux */
+			kb-r0-c1 {
+				nvidia,pins = "kb_row0_pr0",
+					      "kb_col1_pq1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kb-row4 {
+				nvidia,pins = "kb_row4_pr4";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kb-row5 {
+				nvidia,pins = "kb_row5_pr5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kb-row6 {
+				nvidia,pins = "kb_row6_pr6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kb-r8-c3 {
+				nvidia,pins = "kb_row8_ps0",
+					      "kb_col3_pq3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* VI pinmux */
+			cam-mclk {
+				nvidia,pins = "cam_mclk_pcc0",
+					      "pbb0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* AUD pinmux */
+			gpio-x4-aud {
+				nvidia,pins = "gpio_x4_aud_px4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gpio-x1-aud {
+				nvidia,pins = "gpio_x1_aud_px1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gpio-x3-aud {
+				nvidia,pins = "gpio_x3_aud_px3";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gpio-x6-aud {
+				nvidia,pins = "gpio_x6_aud_px6";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			usb-vbus {
+				nvidia,pins = "usb_vbus_en0_pn4",
+					      "usb_vbus_en1_pn5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* GPIO power/drive control */
+			drive-sdio1 {
+				nvidia,pins = "drive_sdio1";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <36>;
+				nvidia,pull-up-strength = <20>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOW>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOW>;
+			};
+
+			drive-sdio3 {
+				nvidia,pins = "drive_sdio3";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <22>;
+				nvidia,pull-up-strength = <36>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+
+			drive-gma {
+				nvidia,pins = "drive_gma";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <2>;
+				nvidia,pull-up-strength = <2>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+		};
+	};
+
+	serial@70006040 {
+		/* GPS */
+	};
+
+	serial@70006200 {
+		compatible = "nvidia,tegra114-hsuart", "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
+		status = "okay";
+
+		nvidia,adjust-baud-rates = <0 9600 100>,
+					   <9600 115200 200>,
+					   <1000000 4000000 136>;
+
+		bluetooth {
+			compatible = "brcm,bcm4334-bt";
+			max-speed = <4000000>;
+
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+			clock-names = "txco";
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "host-wakeup";
+
+			device-wakeup-gpios = <&gpio TEGRA_GPIO(EE, 1) GPIO_ACTIVE_HIGH>;
+			shutdown-gpios = <&gpio TEGRA_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
+			reset-gpios = <&gpio TEGRA_GPIO(Q, 6) GPIO_ACTIVE_LOW>;
+
+			vbat-supply = <&vdd_3v3_com>;
+			vddio-supply = <&vdd_1v8_vio>;
+		};
+	};
+
+	serial@70006300 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		magnetometer@c {
+			compatible = "asahi-kasei,ak09911";
+			reg = <0xc>;
+
+			/* no DRDY (polling) */
+
+			vdd-supply = <&vdd_2v85_sen>;
+			vid-supply = <&vdd_1v8_vio>;
+
+			mount-matrix =  "0",  "1", "0",
+					"1",  "0", "0",
+					"0",  "0","-1";
+		};
+
+		rt5639: audio-codec@1c {
+			compatible = "realtek,rt5639";
+			reg = <0x1c>;
+
+			realtek,ldo1-en-gpios =
+				<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+			clock-names = "mclk";
+		};
+
+		temp_sensor: temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_EDGE_FALLING>;
+
+			vcc-supply = <&vdd_1v8_vio>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		motion-tracker@68 {
+			compatible = "invensense,mpu6500";
+			reg = <0x68>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(R, 3) IRQ_TYPE_LEVEL_HIGH>;
+
+			vdd-supply = <&vdd_2v85_sen>;
+			vddio-supply = <&vdd_1v8_vio>;
+
+			mount-matrix =  "0", "-1", "0",
+					"1",  "0", "0",
+					"0",  "0", "1";
+		};
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		power-sensor@44 {
+			compatible = "ti,ina230";
+			reg = <0x44>;
+
+			shunt-resistor = <5000>;
+		};
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		light-sensor@1c {
+			compatible = "dynaimage,al3320a";
+			reg = <0x1c>;
+
+			vdd-supply = <&vdd_1v8_vio>;
+		};
+	};
+
+	hdmi_ddc: i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <10000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		palmas: pmic@58 {
+			compatible = "ti,tps65913", "ti,palmas";
+			reg = <0x58>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			ti,system-power-controller;
+
+			palmas_gpadc: adc {
+				compatible = "ti,palmas-gpadc";
+				interrupts = <18 IRQ_TYPE_NONE>,
+					     <16 IRQ_TYPE_NONE>,
+					     <17 IRQ_TYPE_NONE>;
+
+				ti,channel0-current-microamp = <5>;
+				ti,channel3-current-microamp = <400>;
+				ti,enable-extended-delay;
+
+				#io-channel-cells = <1>;
+			};
+
+			palmas_extcon: extcon {
+				compatible = "ti,palmas-usb-vid";
+				ti,enable-vbus-detection;
+				ti,enable-id-detection;
+			};
+
+			palmas_gpio: gpio {
+				compatible = "ti,palmas-gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			palmas_clk32kg@0 {
+				compatible = "ti,palmas-clk32kg";
+				#clock-cells = <0>;
+			};
+
+			pinmux {
+				compatible = "ti,tps65913-pinctrl";
+				ti,palmas-enable-dvfs1;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&palmas_default>;
+
+				palmas_default: pinmux {
+					pin_gpio0 {
+						pins = "gpio0";
+						function = "gpio";
+					};
+
+					pin_gpio1 {
+						pins = "gpio1";
+						function = "gpio";
+					};
+
+					pin_gpio2 {
+						pins = "gpio2";
+						function = "gpio";
+					};
+
+					pin_gpio3 {
+						pins = "gpio3";
+						function = "gpio";
+					};
+
+					pin_gpio4 {
+						pins = "gpio4";
+						function = "gpio";
+					};
+
+					pin_gpio5 {
+						pins = "gpio5";
+						function = "gpio";
+					};
+
+					pin_gpio6 {
+						pins = "gpio6";
+						function = "gpio";
+					};
+
+					pin_gpio7 {
+						pins = "gpio7";
+						function = "gpio";
+					};
+
+					pin_powergood {
+						pins = "powergood";
+						function = "powergood";
+					};
+
+					pin_vac {
+						pins = "vac";
+						function = "vac";
+					};
+				};
+			};
+
+			pmic {
+				compatible = "ti,tps65913-pmic", "ti,palmas-pmic";
+
+				ldo1-in-supply = <&vddio_ddr>;
+				ldo2-in-supply = <&vddio_ddr>;
+				ldo4-in-supply = <&vdd_1v8_vio>;
+				ldo5-in-supply = <&vcore_emmc>;
+				ldo6-in-supply = <&vcore_emmc>;
+				ldo7-in-supply = <&vcore_emmc>;
+				ldo9-in-supply = <&vcore_emmc>;
+				ldoln-in-supply = <&vdd_smps10_out2>;
+
+				regulators {
+					vdd_cpu: smps123 {
+						regulator-name = "vdd_cpu";
+						regulator-min-microvolt = <900000>;
+						regulator-max-microvolt = <1350000>;
+						regulator-always-on;
+						regulator-boot-on;
+						ti,roof-floor = <1>;
+						ti,mode-sleep = <3>;
+					};
+
+					vdd_core: smps45 {
+						regulator-name = "vdd_core";
+						regulator-min-microvolt = <900000>;
+						regulator-max-microvolt = <1400000>;
+						regulator-always-on;
+						regulator-boot-on;
+						ti,roof-floor = <3>;
+					};
+
+					/* smps6 disabled */
+
+					vddio_ddr: smps7 {
+						regulator-name = "vddio_ddr";
+						regulator-min-microvolt = <1350000>;
+						regulator-max-microvolt = <1350000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_1v8_vio: smps8 {
+						regulator-name = "vdd_1v8";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vcore_emmc: smps9 {
+						regulator-name = "vdd_emmc";
+						regulator-min-microvolt = <2900000>;
+						regulator-max-microvolt = <2900000>;
+						regulator-boot-on;
+					};
+
+					smps10_out1 {
+						regulator-name = "vd_smps10_out1";
+						regulator-min-microvolt = <5000000>;
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_smps10_out2: smps10_out2 {
+						regulator-name = "vd_smps10_out2";
+						regulator-min-microvolt = <5000000>;
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					avdd_hdmi_pll: ldo1 {
+						regulator-name = "avdd_hdmi_pll";
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <1050000>;
+						regulator-always-on;
+						regulator-boot-on;
+						ti,roof-floor = <3>;
+					};
+
+					avdd_dsi_csi: ldo2 {
+						regulator-name = "avdd_dsi_csi";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+						regulator-boot-on;
+					};
+
+					ldo3 {
+						regulator-name = "vpp_fuse";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					vdd_1v2_cam: ldo4 {
+						regulator-name = "vdd_1v2_cam";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+					};
+
+					avdd_2v8_cam: ldo5 {
+						regulator-name = "avdd_cam2";
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+					};
+
+					vdd_2v85_sen: ldo6 {
+						regulator-name = "vdd_dev";
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+					};
+
+					avdd_2v8_af: ldo7 {
+						regulator-name = "avdd_2v8_cam";
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+					};
+
+					ldo8 {
+						regulator-name = "vdd_rtc";
+						regulator-min-microvolt = <950000>;
+						regulator-max-microvolt = <950000>;
+						regulator-always-on;
+						regulator-boot-on;
+						ti,enable-ldo8-tracking;
+					};
+
+					vddio_usd: ldo9 {
+						regulator-name = "vddio_usd";
+						/* min voltage of 1.8v is not stable */
+						regulator-min-microvolt = <2900000>;
+						regulator-max-microvolt = <2900000>;
+					};
+
+					avdd_hdmi: ldoln {
+						regulator-name = "avdd_hdmi";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-boot-on;
+					};
+
+					avdd_usb: ldousb {
+						regulator-name = "avdd_usb";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-boot-on;
+					};
+				};
+			};
+
+			rtc {
+				compatible = "ti,palmas-rtc";
+				interrupt-parent = <&palmas>;
+				interrupts = <8 IRQ_TYPE_NONE>;
+			};
+		};
+	};
+
+	pmc@7000e400 {
+		status = "okay";
+		nvidia,suspend-mode = <2>;
+		nvidia,cpu-pwr-good-time = <300>;
+		nvidia,cpu-pwr-off-time = <300>;
+		nvidia,core-pwr-good-time = <641 3845>;
+		nvidia,core-pwr-off-time = <2000>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+
+		/* Clear DEV_ON bit in DEV_CTRL register of TPS65913 PMIC  */
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <4>;
+			nvidia,bus-addr = <0x58>;
+			nvidia,reg-addr = <0xA0>;
+			nvidia,reg-data = <0x00>;
+		};
+	};
+
+	ahub@70080000 {
+		/* HIFI CODEC (i2s1) */
+		i2s@70080400 {
+			status = "okay";
+		};
+
+		/* BT SCO (i2s3) */
+		i2s@70080600 {
+			status = "okay";
+		};
+	};
+
+	brcm_wifi_pwrseq: pwrseq-wifi {
+		compatible = "mmc-pwrseq-simple";
+
+		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+		clock-names = "ext_clock";
+
+		reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <300>;
+		power-off-delay-us = <300>;
+	};
+
+	/* WiFi */
+	mmc@78000000 {
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		assigned-clocks = <&tegra_car TEGRA114_CLK_SDMMC1>;
+		assigned-clock-parents = <&tegra_car TEGRA114_CLK_PLL_P>;
+		assigned-clock-rates = <82000000>;
+
+		max-frequency = <82000000>;
+		keep-power-in-suspend;
+		bus-width = <4>;
+		non-removable;
+
+		sd-uhs-ddr50;
+		mmc-ddr-1_8v;
+
+		power-gpios = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_HIGH>;
+
+		nvidia,default-tap = <0x2>;
+		nvidia,default-trim = <0x2>;
+
+		mmc-pwrseq = <&brcm_wifi_pwrseq>;
+		vmmc-supply = <&vdd_3v3_com>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+
+		wifi@1 {
+			compatible = "brcm,bcm4329-fmac";
+			reg = <1>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(U, 5) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host-wake";
+		};
+	};
+
+	/* MicroSD card */
+	mmc@78000400 {
+		status = "okay";
+
+		bus-width = <4>;
+		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+
+		nvidia,default-tap = <0x3>;
+		nvidia,default-trim = <0x3>;
+
+		vmmc-supply = <&vdd_2v9_usd>;
+		vqmmc-supply = <&vddio_usd>;
+	};
+
+	/* eMMC */
+	mmc@78000600 {
+		status = "okay";
+		bus-width = <8>;
+
+		non-removable;
+		mmc-ddr-1_8v;
+
+		vmmc-supply = <&vcore_emmc>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+	};
+
+	/* Peripheral USB via ASUS connector */
+	usb@7d000000 {
+		compatible = "nvidia,tegra114-udc";
+		status = "okay";
+		dr_mode = "peripheral";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		dr_mode = "peripheral";
+		vbus-supply = <&avdd_usb>;
+	};
+
+	/* Host USB via dock */
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&vdd_5v0_sys>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		power-supply = <&vdd_3v7_bl>;
+		pwms = <&pwm 1 1000000>;
+
+		brightness-levels = <1 255>;
+		num-interpolated-steps = <254>;
+		default-brightness-level = <224>;
+	};
+
+	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "pmic-oscillator";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "d";
+
+		hpd-gpios = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+		ddc-i2c-bus = <&hdmi_ddc>;
+
+		port {
+			connector_in: endpoint {
+				remote-endpoint = <&hdmi_out>;
+			};
+		};
+	};
+
+	extcon-keys {
+		compatible = "gpio-keys";
+
+		switch-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&gpio TEGRA_GPIO(O, 5) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+			wakeup-source;
+		};
+
+		switch-lineout-detect {
+			label = "Audio dock line-out detect";
+			gpios = <&gpio TEGRA_GPIO(X, 5) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LINEOUT_INSERT>;
+			debounce-interval = <10>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+		};
+	};
+
+	sound {
+		compatible = "asus,tegra-audio-rt5639-tf701t",
+			     "nvidia,tegra-audio-rt5640";
+		nvidia,model = "Asus Transformer Pad TF701T RT5639";
+
+		nvidia,audio-routing =
+			"Headphones", "HPOR",
+			"Headphones", "HPOL",
+			"Speakers", "SPORP",
+			"Speakers", "SPORN",
+			"Speakers", "SPOLP",
+			"Speakers", "SPOLN",
+			"IN1P", "Mic Jack",
+			"IN1N", "Mic Jack",
+			"DMIC1", "Int Mic",
+			"DMIC2", "Int Mic";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&rt5639>;
+
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_LOW>;
+		nvidia,int-mic-en-gpios = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_HIGH>;
+
+		clocks = <&tegra_car TEGRA114_CLK_PLL_A>,
+			 <&tegra_car TEGRA114_CLK_PLL_A_OUT0>,
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA114_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA114_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA114_CLK_EXTERN1>;
+	};
+
+	vdd_5v0_sys: regulator-5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_3v3_sys: regulator-3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	dvdd_1v8_lcd: regulator-vdd-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "dvdd_1v8_lcd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		gpio = <&palmas_gpio 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_1v8_vio>;
+	};
+
+	vdd_3v7_bl: regulator-bl-en {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v7_bl";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	hdmi_5v0_sys: regulator-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_hdmi";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_smps10_out2>;
+	};
+
+	vdd_2v9_usd: regulator-vdd-usd {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_sd_slot";
+		regulator-min-microvolt = <2900000>;
+		regulator-max-microvolt = <2900000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vcore_emmc>;
+	};
+
+	vdd_1v8_cam: regulator-cam-vio {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v8_cam";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		gpio = <&palmas_gpio 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_1v8_vio>;
+	};
+
+	vdd_1v2_xusb: regulator-xusb-vio {
+		compatible = "regulator-fixed";
+		regulator-name = "avddio_1v2_xusb";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-boot-on;
+		gpio = <&palmas_gpio 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vdd_3v3_xusb: regulator-xusb-vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "hvdd_3v3_xusb";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		gpio = <&palmas_gpio 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vdd_3v3_com: regulator-com {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_com";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_3v3_touch: regulator-touch-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_touch";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_1v8_touch: regulator-touch-vio {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v8_touch";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+};
diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/nvidia/tegra114-dalmore.dts
index 7fd901f8d39a..c06b52fe330a 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/nvidia/tegra114-dalmore.dts
@@ -755,6 +755,8 @@
 	};
 
 	serial@70006300 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
@@ -894,7 +896,7 @@
 		};
 
 		palmas: tps65913@58 {
-			compatible = "ti,palmas";
+			compatible = "ti,tps65913", "ti,palmas";
 			reg = <0x58>;
 			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
 
@@ -909,6 +911,19 @@
 				#gpio-cells = <2>;
 			};
 
+			pinmux {
+				compatible = "ti,tps65913-pinctrl";
+				pinctrl-names = "default";
+				pinctrl-0 = <&palmas_default>;
+
+				palmas_default: pinmux {
+					pin_gpio6 {
+						pins = "gpio6";
+						function = "gpio";
+					};
+				};
+			};
+
 			pmic {
 				compatible = "ti,tps65913-pmic", "ti,palmas-pmic";
 				smps1-in-supply = <&tps65090_dcdc3_reg>;
@@ -1065,26 +1080,14 @@
 				interrupt-parent = <&palmas>;
 				interrupts = <8 0>;
 			};
-
-			pinmux {
-				compatible = "ti,tps65913-pinctrl";
-				pinctrl-names = "default";
-				pinctrl-0 = <&palmas_default>;
-
-				palmas_default: pinmux {
-					pin_gpio6 {
-						pins = "gpio6";
-						function = "gpio";
-					};
-				};
-			};
 		};
 	};
 
 	spi@7000da00 {
 		status = "okay";
 		spi-max-frequency = <25000000>;
-		spi-flash@0 {
+
+		flash@0 {
 			compatible = "winbond,w25q32dw", "jedec,spi-nor";
 			reg = <0>;
 			spi-max-frequency = <20000000>;
@@ -1151,7 +1154,7 @@
 		default-brightness-level = <6>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
@@ -1160,33 +1163,33 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		home {
+		key-home {
 			label = "Home";
 			gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_HOME>;
 		};
 
-		power {
+		key-power {
 			label = "Power";
 			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			wakeup-source;
 		};
 
-		volume_down {
+		key-volume-down {
 			label = "Volume Down";
 			gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
 		};
 
-		volume_up {
+		key-volume-up {
 			label = "Volume Up";
 			gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
 		};
 	};
 
-	vdd_ac_bat_reg: regulator@0 {
+	vdd_ac_bat_reg: regulator-acbat {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_ac_bat";
 		regulator-min-microvolt = <5000000>;
@@ -1194,7 +1197,7 @@
 		regulator-always-on;
 	};
 
-	dvdd_ts_reg: regulator@1 {
+	dvdd_ts_reg: regulator-ts {
 		compatible = "regulator-fixed";
 		regulator-name = "dvdd_ts";
 		regulator-min-microvolt = <1800000>;
@@ -1203,7 +1206,7 @@
 		gpio = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
 	};
 
-	usb1_vbus_reg: regulator@3 {
+	usb1_vbus_reg: regulator-usb1 {
 		compatible = "regulator-fixed";
 		regulator-name = "usb1_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -1214,7 +1217,7 @@
 		vin-supply = <&tps65090_dcdc1_reg>;
 	};
 
-	usb3_vbus_reg: regulator@4 {
+	usb3_vbus_reg: regulator-usb3 {
 		compatible = "regulator-fixed";
 		regulator-name = "usb2_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -1225,7 +1228,7 @@
 		vin-supply = <&tps65090_dcdc1_reg>;
 	};
 
-	vdd_hdmi_reg: regulator@5 {
+	vdd_hdmi_reg: regulator-hdmi {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_hdmi_5v0";
 		regulator-min-microvolt = <5000000>;
@@ -1233,7 +1236,7 @@
 		vin-supply = <&tps65090_dcdc1_reg>;
 	};
 
-	vdd_cam_1v8_reg: regulator@6 {
+	vdd_cam_1v8_reg: regulator-cam {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_cam_1v8_reg";
 		regulator-min-microvolt = <1800000>;
@@ -1242,7 +1245,7 @@
 		gpio = <&palmas_gpio 6 0>;
 	};
 
-	vdd_5v0_hdmi: regulator@7 {
+	vdd_5v0_hdmi: regulator-hdmicon {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_5V0_HDMI_CON";
 		regulator-min-microvolt = <5000000>;
diff --git a/arch/arm/boot/dts/tegra114-roth.dts b/arch/arm/boot/dts/nvidia/tegra114-roth.dts
index 07960171fabe..a89b16573b42 100644
--- a/arch/arm/boot/dts/tegra114-roth.dts
+++ b/arch/arm/boot/dts/nvidia/tegra114-roth.dts
@@ -779,6 +779,8 @@
 
 	/* Usable on reworked devices only */
 	serial@70006300 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
@@ -801,7 +803,7 @@
 		};
 
 		palmas: pmic@58 {
-			compatible = "ti,palmas";
+			compatible = "ti,tps65913", "ti,palmas";
 			reg = <0x58>;
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 
@@ -1016,7 +1018,7 @@
 		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
@@ -1025,19 +1027,19 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		back {
+		key-back {
 			label = "Back";
 			gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_BACK>;
 		};
 
-		home {
+		key-home {
 			label = "Home";
 			gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_HOME>;
 		};
 
-		power {
+		key-power {
 			label = "Power";
 			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
@@ -1045,7 +1047,7 @@
 		};
 	};
 
-	lcd_bl_en: regulator@0 {
+	lcd_bl_en: regulator-lcden {
 		compatible = "regulator-fixed";
 		regulator-name = "lcd_bl_en";
 		regulator-min-microvolt = <5000000>;
@@ -1053,7 +1055,7 @@
 		regulator-boot-on;
 	};
 
-	vdd_lcd: regulator@1 {
+	vdd_lcd: regulator-lcd {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_lcd_1v8";
 		regulator-min-microvolt = <1800000>;
@@ -1064,7 +1066,7 @@
 		regulator-boot-on;
 	};
 
-	regulator@2 {
+	regulator-1v8ts {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v8_ts";
 		regulator-min-microvolt = <1800000>;
@@ -1073,7 +1075,7 @@
 		regulator-boot-on;
 	};
 
-	regulator@3 {
+	regulator-3v3ts {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_3v3_ts";
 		regulator-min-microvolt = <3300000>;
@@ -1083,7 +1085,7 @@
 		regulator-boot-on;
 	};
 
-	regulator@4 {
+	regulator-1v8com {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v8_com";
 		regulator-min-microvolt = <1800000>;
@@ -1094,7 +1096,7 @@
 		regulator-boot-on;
 	};
 
-	regulator@5 {
+	regulator-3v3com {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_3v3_com";
 		regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/tegra114-tn7.dts b/arch/arm/boot/dts/nvidia/tegra114-tn7.dts
index 745d234b105b..bfbdb345575a 100644
--- a/arch/arm/boot/dts/tegra114-tn7.dts
+++ b/arch/arm/boot/dts/nvidia/tegra114-tn7.dts
@@ -50,6 +50,8 @@
 	};
 
 	serial@70006300 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
@@ -62,7 +64,7 @@
 		clock-frequency = <400000>;
 
 		palmas: pmic@58 {
-			compatible = "ti,palmas";
+			compatible = "ti,tps65913", "ti,palmas";
 			reg = <0x58>;
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 
@@ -273,7 +275,7 @@
 		power-supply = <&lcd_bl_en>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
@@ -282,20 +284,20 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			label = "Power";
 			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			wakeup-source;
 		};
 
-		volume_down {
+		key-volume-down {
 			label = "Volume Down";
 			gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
 		};
 
-		volume_up {
+		key-volume-up {
 			label = "Volume Up";
 			gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
@@ -303,7 +305,7 @@
 	};
 
 	/* FIXME: output of BQ24192 */
-	vs_sys: regulator@0 {
+	vs_sys: regulator-vs {
 		compatible = "regulator-fixed";
 		regulator-name = "VS_SYS";
 		regulator-min-microvolt = <4200000>;
@@ -312,7 +314,7 @@
 		regulator-boot-on;
 	};
 
-	lcd_bl_en: regulator@1 {
+	lcd_bl_en: regulator-lcden {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_LCD_BL";
 		regulator-min-microvolt = <16500000>;
@@ -323,7 +325,7 @@
 		regulator-boot-on;
 	};
 
-	vdd_lcd: regulator@2 {
+	vdd_lcd: regulator-lcd {
 		compatible = "regulator-fixed";
 		regulator-name = "VD_LCD_1V8";
 		regulator-min-microvolt = <1800000>;
diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/nvidia/tegra114.dtsi
index fb99b3e971c3..a98667641be2 100644
--- a/arch/arm/boot/dts/tegra114.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra114.dtsi
@@ -4,6 +4,7 @@
 #include <dt-bindings/memory/tegra114-mc.h>
 #include <dt-bindings/pinctrl/pinctrl-tegra.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/nvidia,tegra114-car.h>
 #include <dt-bindings/soc/tegra-pmc.h>
 
 / {
@@ -17,6 +18,19 @@
 		reg = <0x80000000 0x0>;
 	};
 
+	sram@40000000 {
+		compatible = "mmio-sram";
+		reg = <0x40000000 0x40000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x40000000 0x40000>;
+
+		vde_pool: sram@400 {
+			reg = <0x400 0x3fc00>;
+			pool;
+		};
+	};
+
 	host1x@50000000 {
 		compatible = "nvidia,tegra114-host1x";
 		reg = <0x50000000 0x00028000>;
@@ -25,8 +39,8 @@
 		interrupt-names = "syncpt", "host1x";
 		clocks = <&tegra_car TEGRA114_CLK_HOST1X>;
 		clock-names = "host1x";
-		resets = <&tegra_car 28>;
-		reset-names = "host1x";
+		resets = <&tegra_car 28>, <&mc TEGRA114_MC_RESET_HC>;
+		reset-names = "host1x", "mc";
 		iommus = <&mc TEGRA_SWGROUP_HC>;
 
 		#address-cells = <1>;
@@ -34,13 +48,52 @@
 
 		ranges = <0x54000000 0x54000000 0x01000000>;
 
+		vi@54080000 {
+			compatible = "nvidia,tegra114-vi";
+			reg = <0x54080000 0x00040000>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA114_CLK_VI>;
+			resets = <&tegra_car 20>;
+			reset-names = "vi";
+
+			iommus = <&mc TEGRA_SWGROUP_VI>;
+
+			status = "disabled";
+		};
+
+		epp@540c0000 {
+			compatible = "nvidia,tegra114-epp";
+			reg = <0x540c0000 0x00040000>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA114_CLK_EPP>;
+			resets = <&tegra_car TEGRA114_CLK_EPP>;
+			reset-names = "epp";
+
+			iommus = <&mc TEGRA_SWGROUP_EPP>;
+
+			status = "disabled";
+		};
+
+		isp@54100000 {
+			compatible = "nvidia,tegra114-isp";
+			reg = <0x54100000 0x00040000>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA114_CLK_ISP>;
+			resets = <&tegra_car TEGRA114_CLK_ISP>;
+			reset-names = "isp";
+
+			iommus = <&mc TEGRA_SWGROUP_ISP>;
+
+			status = "disabled";
+		};
+
 		gr2d@54140000 {
 			compatible = "nvidia,tegra114-gr2d";
 			reg = <0x54140000 0x00040000>;
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&tegra_car TEGRA114_CLK_GR2D>;
-			resets = <&tegra_car 21>;
-			reset-names = "2d";
+			resets = <&tegra_car 21>, <&mc TEGRA114_MC_RESET_2D>;
+			reset-names = "2d", "mc";
 
 			iommus = <&mc TEGRA_SWGROUP_G2>;
 		};
@@ -49,8 +102,8 @@
 			compatible = "nvidia,tegra114-gr3d";
 			reg = <0x54180000 0x00040000>;
 			clocks = <&tegra_car TEGRA114_CLK_GR3D>;
-			resets = <&tegra_car 24>;
-			reset-names = "3d";
+			resets = <&tegra_car 24>, <&mc TEGRA114_MC_RESET_3D>;
+			reset-names = "3d", "mc";
 
 			iommus = <&mc TEGRA_SWGROUP_NV>;
 		};
@@ -105,7 +158,7 @@
 			status = "disabled";
 		};
 
-		dsi@54300000 {
+		dsia: dsi@54300000 {
 			compatible = "nvidia,tegra114-dsi";
 			reg = <0x54300000 0x00040000>;
 			clocks = <&tegra_car TEGRA114_CLK_DSIA>,
@@ -121,12 +174,12 @@
 			#size-cells = <0>;
 		};
 
-		dsi@54400000 {
+		dsib: dsi@54400000 {
 			compatible = "nvidia,tegra114-dsi";
 			reg = <0x54400000 0x00040000>;
 			clocks = <&tegra_car TEGRA114_CLK_DSIB>,
 				 <&tegra_car TEGRA114_CLK_DSIBLP>,
-				 <&tegra_car TEGRA114_CLK_PLL_D2_OUT0>;
+				 <&tegra_car TEGRA114_CLK_PLL_D_OUT0>;
 			clock-names = "dsi", "lp", "parent";
 			resets = <&tegra_car 82>;
 			reset-names = "dsi";
@@ -136,6 +189,31 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
+
+		msenc@544c0000 {
+			compatible = "nvidia,tegra114-msenc";
+			reg = <0x544c0000 0x00040000>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA114_CLK_MSENC>;
+			resets = <&tegra_car TEGRA114_CLK_MSENC>;
+			reset-names = "mpe";
+
+			iommus = <&mc TEGRA_SWGROUP_MSENC>;
+
+			status = "disabled";
+		};
+
+		tsec@54500000 {
+			compatible = "nvidia,tegra114-tsec";
+			reg = <0x54500000 0x00040000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA114_CLK_TSEC>;
+			resets = <&tegra_car TEGRA114_CLK_TSEC>;
+
+			iommus = <&mc TEGRA_SWGROUP_TSEC>;
+
+			status = "disabled";
+		};
 	};
 
 	gic: interrupt-controller@50041000 {
@@ -164,7 +242,7 @@
 	};
 
 	timer@60005000 {
-		compatible = "nvidia,tegra114-timer", "nvidia,tegra30-timer", "nvidia,tegra20-timer";
+		compatible = "nvidia,tegra114-timer", "nvidia,tegra30-timer";
 		reg = <0x60005000 0x400>;
 		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
@@ -248,9 +326,31 @@
 		gpio-controller;
 		#interrupt-cells = <2>;
 		interrupt-controller;
-		/*
 		gpio-ranges = <&pinmux 0 0 246>;
-		*/
+	};
+
+	vde@6001a000 {
+		compatible = "nvidia,tegra114-vde";
+		reg = <0x6001a000 0x1000>, /* Syntax Engine */
+		      <0x6001b000 0x1000>, /* Video Bitstream Engine */
+		      <0x6001c000  0x100>, /* Macroblock Engine */
+		      <0x6001c200  0x100>, /* Post-processing Engine */
+		      <0x6001c400  0x100>, /* Motion Compensation Engine */
+		      <0x6001c600  0x100>, /* Transform Engine */
+		      <0x6001c800  0x100>, /* Pixel prediction block */
+		      <0x6001ca00  0x100>, /* Video DMA */
+		      <0x6001d800  0x400>; /* Video frame controls */
+		reg-names = "sxe", "bsev", "mbe", "ppe", "mce",
+			    "tfe", "ppb", "vdma", "frameid";
+		iram = <&vde_pool>; /* IRAM region */
+		interrupts = <GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>, /* Sync token interrupt */
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, /* BSE-V interrupt */
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; /* SXE interrupt */
+		interrupt-names = "sync-token", "bsev", "sxe";
+		clocks = <&tegra_car TEGRA114_CLK_VDE>;
+		reset-names = "vde", "mc";
+		resets = <&tegra_car 61>, <&mc TEGRA114_MC_RESET_VDE>;
+		iommus = <&mc TEGRA_SWGROUP_VDE>;
 	};
 
 	apbmisc@70000800 {
@@ -280,7 +380,6 @@
 		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA114_CLK_UARTA>;
 		resets = <&tegra_car 6>;
-		reset-names = "serial";
 		dmas = <&apbdma 8>, <&apbdma 8>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -293,7 +392,6 @@
 		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA114_CLK_UARTB>;
 		resets = <&tegra_car 7>;
-		reset-names = "serial";
 		dmas = <&apbdma 9>, <&apbdma 9>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -306,7 +404,6 @@
 		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA114_CLK_UARTC>;
 		resets = <&tegra_car 55>;
-		reset-names = "serial";
 		dmas = <&apbdma 10>, <&apbdma 10>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -319,7 +416,6 @@
 		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA114_CLK_UARTD>;
 		resets = <&tegra_car 65>;
-		reset-names = "serial";
 		dmas = <&apbdma 19>, <&apbdma 19>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -542,9 +638,25 @@
 
 		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 
+		#reset-cells = <1>;
 		#iommu-cells = <1>;
 	};
 
+	hda@70030000 {
+		compatible = "nvidia,tegra114-hda", "nvidia,tegra30-hda";
+		reg = <0x70030000 0x10000>;
+		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_HDA>,
+			 <&tegra_car TEGRA114_CLK_HDA2HDMI>,
+			 <&tegra_car TEGRA114_CLK_HDA2CODEC_2X>;
+		clock-names = "hda", "hda2hdmi", "hda2codec_2x";
+		resets = <&tegra_car 125>, /* hda */
+			 <&tegra_car 128>, /* hda2hdmi */
+			 <&tegra_car 111>; /* hda2codec_2x */
+		reset-names = "hda", "hda2hdmi", "hda2codec_2x";
+		status = "disabled";
+	};
+
 	ahub@70080000 {
 		compatible = "nvidia,tegra114-ahub";
 		reg = <0x70080000 0x200>,
@@ -646,6 +758,29 @@
 		#nvidia,mipi-calibrate-cells = <1>;
 	};
 
+	dfll: clock@70110000 {
+		compatible = "nvidia,tegra114-dfll";
+		reg = <0x70110000 0x100>, /* DFLL control */
+		      <0x70110000 0x100>, /* I2C output control */
+		      <0x70110100 0x100>, /* Integrated I2C controller */
+		      <0x70110200 0x100>; /* Look-up table RAM */
+		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_DFLL_SOC>,
+			 <&tegra_car TEGRA114_CLK_DFLL_REF>,
+			 <&tegra_car TEGRA114_CLK_I2C5>;
+		clock-names = "soc", "ref", "i2c";
+		resets = <&tegra_car TEGRA114_RST_DFLL_DVCO>;
+		reset-names = "dvco";
+		#clock-cells = <0>;
+		clock-output-names = "dfllCPU_out";
+		nvidia,droop-ctrl = <0x00000f00>;
+		nvidia,force-mode = <1>;
+		nvidia,cf = <10>;
+		nvidia,ci = <0>;
+		nvidia,cg = <2>;
+		status = "disabled";
+	};
+
 	mmc@78000000 {
 		compatible = "nvidia,tegra114-sdhci";
 		reg = <0x78000000 0x200>;
@@ -691,7 +826,7 @@
 	};
 
 	usb@7d000000 {
-		compatible = "nvidia,tegra114-ehci", "nvidia,tegra30-ehci", "usb-ehci";
+		compatible = "nvidia,tegra114-ehci", "nvidia,tegra30-ehci";
 		reg = <0x7d000000 0x4000>;
 		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
@@ -706,6 +841,7 @@
 		compatible = "nvidia,tegra114-usb-phy", "nvidia,tegra30-usb-phy";
 		reg = <0x7d000000 0x4000>,
 		      <0x7d000000 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA114_CLK_USBD>,
 			 <&tegra_car TEGRA114_CLK_PLL_U>,
@@ -725,11 +861,12 @@
 		nvidia,hsdiscon-level = <5>;
 		nvidia,xcvr-hsslew = <12>;
 		nvidia,has-utmi-pad-registers;
+		nvidia,pmc = <&tegra_pmc 0>;
 		status = "disabled";
 	};
 
 	usb@7d008000 {
-		compatible = "nvidia,tegra114-ehci", "nvidia,tegra30-ehci", "usb-ehci";
+		compatible = "nvidia,tegra114-ehci", "nvidia,tegra30-ehci";
 		reg = <0x7d008000 0x4000>;
 		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
@@ -744,6 +881,7 @@
 		compatible = "nvidia,tegra114-usb-phy", "nvidia,tegra30-usb-phy";
 		reg = <0x7d008000 0x4000>,
 		      <0x7d000000 0x4000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA114_CLK_USB3>,
 			 <&tegra_car TEGRA114_CLK_PLL_U>,
@@ -762,6 +900,7 @@
 		nvidia,hssquelch-level = <2>;
 		nvidia,hsdiscon-level = <5>;
 		nvidia,xcvr-hsslew = <12>;
+		nvidia,pmc = <&tegra_pmc 2>;
 		status = "disabled";
 	};
 
@@ -769,31 +908,49 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0>;
+
+			clocks = <&tegra_car TEGRA114_CLK_CCLK_G>,
+				 <&tegra_car TEGRA114_CLK_CCLK_LP>,
+				 <&tegra_car TEGRA114_CLK_PLL_X>,
+				 <&tegra_car TEGRA114_CLK_PLL_P>,
+				 <&dfll>;
+			clock-names = "cpu_g", "cpu_lp", "pll_x", "pll_p", "dfll";
+			/* FIXME: what's the actual transition time? */
+			clock-latency = <300000>;
 		};
 
-		cpu@1 {
+		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <1>;
 		};
 
-		cpu@2 {
+		cpu2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <2>;
 		};
 
-		cpu@3 {
+		cpu3: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <3>;
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupts =
diff --git a/arch/arm/boot/dts/tegra124-apalis-emc.dtsi b/arch/arm/boot/dts/nvidia/tegra124-apalis-emc.dtsi
index a7ac805eeed5..970f33dd9101 100644
--- a/arch/arm/boot/dts/tegra124-apalis-emc.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra124-apalis-emc.dtsi
@@ -4,6 +4,8 @@
  *
  */
 
+#include <dt-bindings/clock/tegra124-car.h>
+
 / {
 	clock@60006000 {
 		emc-timings-1 {
@@ -15,66 +17,77 @@
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-20400000 {
 				clock-frequency = <20400000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-40800000 {
 				clock-frequency = <40800000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-68000000 {
 				clock-frequency = <68000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-102000000 {
 				clock-frequency = <102000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-204000000 {
 				clock-frequency = <204000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-300000000 {
 				clock-frequency = <300000000>;
 				nvidia,parent-clock-frequency = <600000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_C>;
 				clock-names = "emc-parent";
 			};
+
 			timing-396000000 {
 				clock-frequency = <396000000>;
 				nvidia,parent-clock-frequency = <792000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_M>;
 				clock-names = "emc-parent";
 			};
+
 			timing-528000000 {
 				clock-frequency = <528000000>;
 				nvidia,parent-clock-frequency = <528000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
 				clock-names = "emc-parent";
 			};
+
 			timing-600000000 {
 				clock-frequency = <600000000>;
 				nvidia,parent-clock-frequency = <600000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_C_UD>;
 				clock-names = "emc-parent";
 			};
+
 			timing-792000000 {
 				clock-frequency = <792000000>;
 				nvidia,parent-clock-frequency = <792000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
 				clock-names = "emc-parent";
 			};
+
 			timing-924000000 {
 				clock-frequency = <924000000>;
 				nvidia,parent-clock-frequency = <924000000>;
@@ -84,6 +97,216 @@
 		};
 	};
 
+	memory-controller@70019000 {
+		emc-timings-1 {
+			nvidia,ram-code = <1>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emem-configuration = <
+					0x40040001 0x8000000a
+					0x00000001 0x00000001
+					0x00000002 0x00000000
+					0x00000002 0x00000001
+					0x00000003 0x00000008
+					0x00000003 0x00000002
+					0x00000003 0x00000006
+					0x06030203 0x000a0502
+					0x77e30303 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emem-configuration = <
+					0x40020001 0x80000012
+					0x00000001 0x00000001
+					0x00000002 0x00000000
+					0x00000002 0x00000001
+					0x00000003 0x00000008
+					0x00000003 0x00000002
+					0x00000003 0x00000006
+					0x06030203 0x000a0502
+					0x76230303 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emem-configuration = <
+					0xa0000001 0x80000017
+					0x00000001 0x00000001
+					0x00000002 0x00000000
+					0x00000002 0x00000001
+					0x00000003 0x00000008
+					0x00000003 0x00000002
+					0x00000003 0x00000006
+					0x06030203 0x000a0502
+					0x74a30303 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emem-configuration = <
+					0x00000001 0x8000001e
+					0x00000001 0x00000001
+					0x00000002 0x00000000
+					0x00000002 0x00000001
+					0x00000003 0x00000008
+					0x00000003 0x00000002
+					0x00000003 0x00000006
+					0x06030203 0x000a0502
+					0x74230403 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = <
+					0x08000001 0x80000026
+					0x00000001 0x00000001
+					0x00000003 0x00000000
+					0x00000002 0x00000001
+					0x00000003 0x00000008
+					0x00000003 0x00000002
+					0x00000003 0x00000006
+					0x06030203 0x000a0503
+					0x73c30504 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = <
+					0x01000003 0x80000040
+					0x00000001 0x00000001
+					0x00000004 0x00000002
+					0x00000003 0x00000001
+					0x00000003 0x00000008
+					0x00000003 0x00000002
+					0x00000004 0x00000006
+					0x06040203 0x000a0504
+					0x73840a05 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emem-configuration = <
+					0x08000004 0x80000040
+					0x00000001 0x00000002
+					0x00000007 0x00000004
+					0x00000004 0x00000001
+					0x00000002 0x00000007
+					0x00000002 0x00000002
+					0x00000004 0x00000006
+					0x06040202 0x000b0607
+					0x77450e08 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000005 0x80000040
+					0x00000001 0x00000002
+					0x00000009 0x00000005
+					0x00000006 0x00000001
+					0x00000002 0x00000008
+					0x00000002 0x00000002
+					0x00000004 0x00000006
+					0x06040202 0x000d0709
+					0x7586120a 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000007 0x80000040
+					0x00000002 0x00000003
+					0x0000000c 0x00000007
+					0x00000008 0x00000001
+					0x00000002 0x00000009
+					0x00000002 0x00000002
+					0x00000005 0x00000006
+					0x06050202 0x0010090c
+					0x7428180d 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emem-configuration = <
+					0x00000009 0x80000040
+					0x00000003 0x00000004
+					0x0000000e 0x00000009
+					0x0000000a 0x00000001
+					0x00000003 0x0000000b
+					0x00000002 0x00000002
+					0x00000005 0x00000007
+					0x07050202 0x00130b0e
+					0x73a91b0f 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emem-configuration = <
+					0x0e00000b 0x80000040
+					0x00000004 0x00000005
+					0x00000013 0x0000000c
+					0x0000000d 0x00000002
+					0x00000003 0x0000000c
+					0x00000002 0x00000002
+					0x00000006 0x00000008
+					0x08060202 0x00170e13
+					0x736c2414 0x70000f02
+					0x001f0000
+				>;
+			};
+
+			timing-924000000 {
+				clock-frequency = <924000000>;
+
+				nvidia,emem-configuration = <
+					0x0e00000d 0x80000040
+					0x00000005 0x00000006
+					0x00000016 0x0000000e
+					0x0000000f 0x00000002
+					0x00000004 0x0000000e
+					0x00000002 0x00000002
+					0x00000006 0x00000009
+					0x09060202 0x001a1016
+					0x734e2a17 0x70000f02
+					0x001f0000
+				>;
+			};
+		};
+	};
+
 	external-memory-controller@7001b000 {
 		emc-timings-1 {
 			nvidia,ram-code = <1>;
@@ -1251,225 +1474,14 @@
 					0x00000011
 				>;
 			};
-
 		};
 	};
 
-	memory-controller@70019000 {
-		emc-timings-1 {
-			nvidia,ram-code = <1>;
-
-			timing-12750000 {
-				clock-frequency = <12750000>;
-
-				nvidia,emem-configuration = <
-					0x40040001 0x8000000a
-					0x00000001 0x00000001
-					0x00000002 0x00000000
-					0x00000002 0x00000001
-					0x00000003 0x00000008
-					0x00000003 0x00000002
-					0x00000003 0x00000006
-					0x06030203 0x000a0502
-					0x77e30303 0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-20400000 {
-				clock-frequency = <20400000>;
-
-				nvidia,emem-configuration = <
-					0x40020001 0x80000012
-					0x00000001 0x00000001
-					0x00000002 0x00000000
-					0x00000002 0x00000001
-					0x00000003 0x00000008
-					0x00000003 0x00000002
-					0x00000003 0x00000006
-					0x06030203 0x000a0502
-					0x76230303 0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-40800000 {
-				clock-frequency = <40800000>;
-
-				nvidia,emem-configuration = <
-					0xa0000001 0x80000017
-					0x00000001 0x00000001
-					0x00000002 0x00000000
-					0x00000002 0x00000001
-					0x00000003 0x00000008
-					0x00000003 0x00000002
-					0x00000003 0x00000006
-					0x06030203 0x000a0502
-					0x74a30303 0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-68000000 {
-				clock-frequency = <68000000>;
-
-				nvidia,emem-configuration = <
-					0x00000001 0x8000001e
-					0x00000001 0x00000001
-					0x00000002 0x00000000
-					0x00000002 0x00000001
-					0x00000003 0x00000008
-					0x00000003 0x00000002
-					0x00000003 0x00000006
-					0x06030203 0x000a0502
-					0x74230403 0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-102000000 {
-				clock-frequency = <102000000>;
-
-				nvidia,emem-configuration = <
-					0x08000001 0x80000026
-					0x00000001 0x00000001
-					0x00000003 0x00000000
-					0x00000002 0x00000001
-					0x00000003 0x00000008
-					0x00000003 0x00000002
-					0x00000003 0x00000006
-					0x06030203 0x000a0503
-					0x73c30504 0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-204000000 {
-				clock-frequency = <204000000>;
-
-				nvidia,emem-configuration = <
-					0x01000003 0x80000040
-					0x00000001 0x00000001
-					0x00000004 0x00000002
-					0x00000003 0x00000001
-					0x00000003 0x00000008
-					0x00000003 0x00000002
-					0x00000004 0x00000006
-					0x06040203 0x000a0504
-					0x73840a05 0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-300000000 {
-				clock-frequency = <300000000>;
-
-				nvidia,emem-configuration = <
-					0x08000004 0x80000040
-					0x00000001 0x00000002
-					0x00000007 0x00000004
-					0x00000004 0x00000001
-					0x00000002 0x00000007
-					0x00000002 0x00000002
-					0x00000004 0x00000006
-					0x06040202 0x000b0607
-					0x77450e08 0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-396000000 {
-				clock-frequency = <396000000>;
-
-				nvidia,emem-configuration = <
-					0x0f000005 0x80000040
-					0x00000001 0x00000002
-					0x00000009 0x00000005
-					0x00000006 0x00000001
-					0x00000002 0x00000008
-					0x00000002 0x00000002
-					0x00000004 0x00000006
-					0x06040202 0x000d0709
-					0x7586120a 0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-528000000 {
-				clock-frequency = <528000000>;
-
-				nvidia,emem-configuration = <
-					0x0f000007 0x80000040
-					0x00000002 0x00000003
-					0x0000000c 0x00000007
-					0x00000008 0x00000001
-					0x00000002 0x00000009
-					0x00000002 0x00000002
-					0x00000005 0x00000006
-					0x06050202 0x0010090c
-					0x7428180d 0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-600000000 {
-				clock-frequency = <600000000>;
-
-				nvidia,emem-configuration = <
-					0x00000009 0x80000040
-					0x00000003 0x00000004
-					0x0000000e 0x00000009
-					0x0000000a 0x00000001
-					0x00000003 0x0000000b
-					0x00000002 0x00000002
-					0x00000005 0x00000007
-					0x07050202 0x00130b0e
-					0x73a91b0f 0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-792000000 {
-				clock-frequency = <792000000>;
-
-				nvidia,emem-configuration = <
-					0x0e00000b 0x80000040
-					0x00000004 0x00000005
-					0x00000013 0x0000000c
-					0x0000000d 0x00000002
-					0x00000003 0x0000000c
-					0x00000002 0x00000002
-					0x00000006 0x00000008
-					0x08060202 0x00170e13
-					0x736c2414 0x70000f02
-					0x001f0000
-				>;
-			};
-
-			timing-924000000 {
-				clock-frequency = <924000000>;
-
-				nvidia,emem-configuration = <
-					0x0e00000d 0x80000040
-					0x00000005 0x00000006
-					0x00000016 0x0000000e
-					0x0000000f 0x00000002
-					0x00000004 0x0000000e
-					0x00000002 0x00000002
-					0x00000006 0x00000009
-					0x09060202 0x001a1016
-					0x734e2a17 0x70000f02
-					0x001f0000
-				>;
-			};
-		};
+	opp-table-actmon {
+		/delete-node/ opp-1200000000;
 	};
-};
 
-&emc_icc_dvfs_opp_table {
-	/delete-node/ opp@1200000000,1100;
-};
-
-&emc_bw_dfs_opp_table {
-	/delete-node/ opp@1200000000;
+	opp-table-emc {
+		/delete-node/ opp-1200000000-1100;
+	};
 };
diff --git a/arch/arm/boot/dts/tegra124-apalis-eval.dts b/arch/arm/boot/dts/nvidia/tegra124-apalis-eval.dts
index 28c29b6813a7..1aa7265554d9 100644
--- a/arch/arm/boot/dts/tegra124-apalis-eval.dts
+++ b/arch/arm/boot/dts/nvidia/tegra124-apalis-eval.dts
@@ -40,8 +40,20 @@
 		};
 	};
 
+	gpio: gpio@6000d000 {
+		/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
+		pex-perst-n-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "PEX_PERST_N";
+		};
+	};
+
 	/* Apalis UART1 */
 	serial@70006000 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
@@ -72,11 +84,6 @@
 		status = "okay";
 		clock-frequency = <400000>;
 
-		pcie-switch@58 {
-			compatible = "plx,pex8605";
-			reg = <0x58>;
-		};
-
 		/* M41T0M6 real time clock on carrier board */
 		rtc@68 {
 			compatible = "st,m41t0";
@@ -191,7 +198,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wakeup {
+		key-wakeup {
 			label = "WAKE1_MICO";
 			gpios = <&gpio TEGRA_GPIO(DD, 3) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_WAKEUP>;
@@ -243,13 +250,3 @@
 		vin-supply = <&reg_5v0>;
 	};
 };
-
-&gpio {
-	/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
-	pex-perst-n {
-		gpio-hog;
-		gpios = <TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "PEX_PERST_N";
-	};
-};
diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts b/arch/arm/boot/dts/nvidia/tegra124-apalis-v1.2-eval.dts
index f3afde410615..23158bb82173 100644
--- a/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts
+++ b/arch/arm/boot/dts/nvidia/tegra124-apalis-v1.2-eval.dts
@@ -41,8 +41,20 @@
 		};
 	};
 
+	gpio@6000d000 {
+		/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
+		pex-perst-n-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "PEX_PERST_N";
+		};
+	};
+
 	/* Apalis UART1 */
 	serial@70006000 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
@@ -73,11 +85,6 @@
 		status = "okay";
 		clock-frequency = <400000>;
 
-		pcie-switch@58 {
-			compatible = "plx,pex8605";
-			reg = <0x58>;
-		};
-
 		/* M41T0M6 real time clock on carrier board */
 		rtc@68 {
 			compatible = "st,m41t0";
@@ -193,7 +200,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wakeup {
+		key-wakeup {
 			label = "WAKE1_MICO";
 			gpios = <&gpio TEGRA_GPIO(DD, 3) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_WAKEUP>;
@@ -245,13 +252,3 @@
 		vin-supply = <&reg_5v0>;
 	};
 };
-
-&gpio {
-	/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
-	pex-perst-n {
-		gpio-hog;
-		gpios = <TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "PEX_PERST_N";
-	};
-};
diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi b/arch/arm/boot/dts/nvidia/tegra124-apalis-v1.2.dtsi
index cde9ae8fa04b..54b7da4b6920 100644
--- a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra124-apalis-v1.2.dtsi
@@ -57,7 +57,7 @@
 		};
 	};
 
-	gpu@0,57000000 {
+	gpu@57000000 {
 		/*
 		 * Node left disabled on purpose - the bootloader will enable
 		 * it after having set the VPR up
@@ -65,6 +65,24 @@
 		vdd-supply = <&reg_vdd_gpu>;
 	};
 
+	gpio@6000d000 {
+		/* I210 Gigabit Ethernet Controller Reset */
+		lan-reset-n-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "LAN_RESET_N";
+		};
+
+		/* Control MXM3 pin 26 Reset Module Output Carrier Input */
+		reset-moci-ctrl-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "RESET_MOCI_CTRL";
+		};
+	};
+
 	pinmux@70000868 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&state_default>;
@@ -1539,14 +1557,20 @@
 
 	serial@70006040 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
 	};
 
 	serial@70006200 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
 	};
 
 	serial@70006300 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
 	};
 
 	hdmi_ddc: i2c@7000c700 {
@@ -1582,18 +1606,18 @@
 			pinctrl-0 = <&as3722_default>;
 
 			as3722_default: pinmux {
+				gpio0-1-3-4-5-6 {
+					pins = "gpio0", "gpio1", "gpio3",
+					       "gpio4", "gpio5", "gpio6";
+					bias-high-impedance;
+				};
+
 				gpio2-7 {
 					pins = "gpio2", /* PWR_EN_+V3.3 */
 					       "gpio7"; /* +V1.6_LPO */
 					function = "gpio";
 					bias-pull-up;
 				};
-
-				gpio0-1-3-4-5-6 {
-					pins = "gpio0", "gpio1", "gpio3",
-					       "gpio4", "gpio5", "gpio6";
-					bias-high-impedance;
-				};
 			};
 
 			regulators {
@@ -1885,6 +1909,7 @@
 			usb2-0 {
 				status = "okay";
 				mode = "otg";
+				usb-role-switch;
 				vbus-supply = <&reg_usbo1_vbus>;
 			};
 
@@ -1939,18 +1964,18 @@
 		};
 	};
 
-	clk32k_in: osc3 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-	};
-
 	cpus {
 		cpu@0 {
 			vdd-cpu-supply = <&reg_vdd_cpu>;
 		};
 	};
 
+	clk32k_in: osc3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
 	reg_1v05_avdd_hdmi_pll: regulator-1v05-avdd-hdmi-pll {
 		compatible = "regulator-fixed";
 		regulator-name = "+V1.05_AVDD_HDMI_PLL";
@@ -2021,7 +2046,7 @@
 	};
 
 	thermal-zones {
-		cpu {
+		cpu-thermal {
 			trips {
 				cpu-shutdown-trip {
 					temperature = <101000>;
@@ -2031,7 +2056,7 @@
 			};
 		};
 
-		mem {
+		mem-thermal {
 			trips {
 				mem-shutdown-trip {
 					temperature = <101000>;
@@ -2041,7 +2066,7 @@
 			};
 		};
 
-		gpu {
+		gpu-thermal {
 			trips {
 				gpu-shutdown-trip {
 					temperature = <101000>;
@@ -2052,21 +2077,3 @@
 		};
 	};
 };
-
-&gpio {
-	/* I210 Gigabit Ethernet Controller Reset */
-	lan-reset-n {
-		gpio-hog;
-		gpios = <TEGRA_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "LAN_RESET_N";
-	};
-
-	/* Control MXM3 pin 26 Reset Module Output Carrier Input */
-	reset-moci-ctrl {
-		gpio-hog;
-		gpios = <TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "RESET_MOCI_CTRL";
-	};
-};
diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/nvidia/tegra124-apalis.dtsi
index a46d9ba9bb7a..c5a0d6aebaec 100644
--- a/arch/arm/boot/dts/tegra124-apalis.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra124-apalis.dtsi
@@ -56,7 +56,7 @@
 		};
 	};
 
-	gpu@0,57000000 {
+	gpu@57000000 {
 		/*
 		 * Node left disabled on purpose - the bootloader will enable
 		 * it after having set the VPR up
@@ -64,6 +64,24 @@
 		vdd-supply = <&reg_vdd_gpu>;
 	};
 
+	gpio@6000d000 {
+		/* I210 Gigabit Ethernet Controller Reset */
+		lan-reset-n-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "LAN_RESET_N";
+		};
+
+		/* Control MXM3 pin 26 Reset Module Output Carrier Input */
+		reset-moci-ctrl-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "RESET_MOCI_CTRL";
+		};
+	};
+
 	pinmux@70000868 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&state_default>;
@@ -1532,14 +1550,20 @@
 
 	serial@70006040 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
 	};
 
 	serial@70006200 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
 	};
 
 	serial@70006300 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
 	};
 
 	hdmi_ddc: i2c@7000c400 {
@@ -1575,18 +1599,18 @@
 			pinctrl-0 = <&as3722_default>;
 
 			as3722_default: pinmux {
+				gpio0-1-3-4-5-6 {
+					pins = "gpio0", "gpio1", "gpio3",
+					       "gpio4", "gpio5", "gpio6";
+					bias-high-impedance;
+				};
+
 				gpio2-7 {
 					pins = "gpio2", /* PWR_EN_+V3.3 */
 					       "gpio7"; /* +V1.6_LPO */
 					function = "gpio";
 					bias-pull-up;
 				};
-
-				gpio0-1-3-4-5-6 {
-					pins = "gpio0", "gpio1", "gpio3",
-					       "gpio4", "gpio5", "gpio6";
-					bias-high-impedance;
-				};
 			};
 
 			regulators {
@@ -1877,6 +1901,7 @@
 			usb2-0 {
 				status = "okay";
 				mode = "otg";
+				usb-role-switch;
 				vbus-supply = <&reg_usbo1_vbus>;
 			};
 
@@ -1931,18 +1956,18 @@
 		};
 	};
 
-	clk32k_in: osc3 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-	};
-
 	cpus {
 		cpu@0 {
 			vdd-cpu-supply = <&reg_vdd_cpu>;
 		};
 	};
 
+	clk32k_in: osc3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
 	reg_1v05_avdd_hdmi_pll: regulator-1v05-avdd-hdmi-pll {
 		compatible = "regulator-fixed";
 		regulator-name = "+V1.05_AVDD_HDMI_PLL";
@@ -2013,7 +2038,7 @@
 	};
 
 	thermal-zones {
-		cpu {
+		cpu-thermal {
 			trips {
 				cpu-shutdown-trip {
 					temperature = <101000>;
@@ -2023,7 +2048,7 @@
 			};
 		};
 
-		mem {
+		mem-thermal {
 			trips {
 				mem-shutdown-trip {
 					temperature = <101000>;
@@ -2033,7 +2058,7 @@
 			};
 		};
 
-		gpu {
+		gpu-thermal {
 			trips {
 				gpu-shutdown-trip {
 					temperature = <101000>;
@@ -2044,21 +2069,3 @@
 		};
 	};
 };
-
-&gpio {
-	/* I210 Gigabit Ethernet Controller Reset */
-	lan-reset-n {
-		gpio-hog;
-		gpios = <TEGRA_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "LAN_RESET_N";
-	};
-
-	/* Control MXM3 pin 26 Reset Module Output Carrier Input */
-	reset-moci-ctrl {
-		gpio-hog;
-		gpios = <TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "RESET_MOCI_CTRL";
-	};
-};
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi b/arch/arm/boot/dts/nvidia/tegra124-jetson-tk1-emc.dtsi
index df4e463afbd1..d10e5334a6c6 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra124-jetson-tk1-emc.dtsi
@@ -1,4 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/clock/tegra124-car.h>
+
 / {
 	clock@60006000 {
 		emc-timings-3 {
@@ -10,66 +13,77 @@
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-20400000 {
 				clock-frequency = <20400000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-40800000 {
 				clock-frequency = <40800000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-68000000 {
 				clock-frequency = <68000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-102000000 {
 				clock-frequency = <102000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-204000000 {
 				clock-frequency = <204000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-300000000 {
 				clock-frequency = <300000000>;
 				nvidia,parent-clock-frequency = <600000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_C>;
 				clock-names = "emc-parent";
 			};
+
 			timing-396000000 {
 				clock-frequency = <396000000>;
 				nvidia,parent-clock-frequency = <792000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_M>;
 				clock-names = "emc-parent";
 			};
+
 			timing-528000000 {
 				clock-frequency = <528000000>;
 				nvidia,parent-clock-frequency = <528000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
 				clock-names = "emc-parent";
 			};
+
 			timing-600000000 {
 				clock-frequency = <600000000>;
 				nvidia,parent-clock-frequency = <600000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_C_UD>;
 				clock-names = "emc-parent";
 			};
+
 			timing-792000000 {
 				clock-frequency = <792000000>;
 				nvidia,parent-clock-frequency = <792000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
 				clock-names = "emc-parent";
 			};
+
 			timing-924000000 {
 				clock-frequency = <924000000>;
 				nvidia,parent-clock-frequency = <924000000>;
@@ -79,6 +93,324 @@
 		};
 	};
 
+	memory-controller@70019000 {
+		emc-timings-3 {
+			nvidia,ram-code = <3>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emem-configuration = <
+					0x40040001
+					0x8000000a
+					0x00000001
+					0x00000001
+					0x00000002
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000003
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0502
+					0x77e30303
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emem-configuration = <
+					0x40020001
+					0x80000012
+					0x00000001
+					0x00000001
+					0x00000002
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000003
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0502
+					0x76230303
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emem-configuration = <
+					0xa0000001
+					0x80000017
+					0x00000001
+					0x00000001
+					0x00000002
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000003
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0502
+					0x74a30303
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emem-configuration = <
+					0x00000001
+					0x8000001e
+					0x00000001
+					0x00000001
+					0x00000002
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000003
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0502
+					0x74230403
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = <
+					0x08000001
+					0x80000026
+					0x00000001
+					0x00000001
+					0x00000003
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000003
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0503
+					0x73c30504
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = <
+					0x01000003
+					0x80000040
+					0x00000001
+					0x00000001
+					0x00000004
+					0x00000002
+					0x00000003
+					0x00000001
+					0x00000003
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000004
+					0x00000006
+					0x06040203
+					0x000a0504
+					0x73840a05
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emem-configuration = <
+					0x08000004
+					0x80000040
+					0x00000001
+					0x00000002
+					0x00000007
+					0x00000004
+					0x00000004
+					0x00000001
+					0x00000002
+					0x00000007
+					0x00000002
+					0x00000002
+					0x00000004
+					0x00000006
+					0x06040202
+					0x000b0607
+					0x77450e08
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000005
+					0x80000040
+					0x00000001
+					0x00000002
+					0x00000009
+					0x00000005
+					0x00000006
+					0x00000001
+					0x00000002
+					0x00000008
+					0x00000002
+					0x00000002
+					0x00000004
+					0x00000006
+					0x06040202
+					0x000d0709
+					0x7586120a
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000007
+					0x80000040
+					0x00000002
+					0x00000003
+					0x0000000c
+					0x00000007
+					0x00000008
+					0x00000001
+					0x00000002
+					0x00000009
+					0x00000002
+					0x00000002
+					0x00000005
+					0x00000006
+					0x06050202
+					0x0010090c
+					0x7428180d
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emem-configuration = <
+					0x00000009
+					0x80000040
+					0x00000003
+					0x00000004
+					0x0000000e
+					0x00000009
+					0x0000000a
+					0x00000001
+					0x00000003
+					0x0000000b
+					0x00000002
+					0x00000002
+					0x00000005
+					0x00000007
+					0x07050202
+					0x00130b0e
+					0x73a91b0f
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emem-configuration = <
+					0x0e00000b
+					0x80000040
+					0x00000004
+					0x00000005
+					0x00000013
+					0x0000000c
+					0x0000000d
+					0x00000002
+					0x00000003
+					0x0000000c
+					0x00000002
+					0x00000002
+					0x00000006
+					0x00000008
+					0x08060202
+					0x00170e13
+					0x736c2414
+					0x70000f02
+					0x001f0000
+				>;
+			};
+
+			timing-924000000 {
+				clock-frequency = <924000000>;
+
+				nvidia,emem-configuration = <
+					0x0e00000d
+					0x80000040
+					0x00000005
+					0x00000006
+					0x00000016
+					0x0000000e
+					0x0000000f
+					0x00000002
+					0x00000004
+					0x0000000e
+					0x00000002
+					0x00000002
+					0x00000006
+					0x00000009
+					0x09060202
+					0x001a1016
+					0x734e2a17
+					0x70000f02
+					0x001f0000
+				>;
+			};
+		};
+	};
+
 	external-memory-controller@7001b000 {
 		emc-timings-3 {
 			nvidia,ram-code = <3>;
@@ -2098,333 +2430,14 @@
 					0x00000011
 				>;
 			};
-
 		};
 	};
 
-	memory-controller@70019000 {
-		emc-timings-3 {
-			nvidia,ram-code = <3>;
-
-			timing-12750000 {
-				clock-frequency = <12750000>;
-
-				nvidia,emem-configuration = <
-					0x40040001
-					0x8000000a
-					0x00000001
-					0x00000001
-					0x00000002
-					0x00000000
-					0x00000002
-					0x00000001
-					0x00000003
-					0x00000008
-					0x00000003
-					0x00000002
-					0x00000003
-					0x00000006
-					0x06030203
-					0x000a0502
-					0x77e30303
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-20400000 {
-				clock-frequency = <20400000>;
-
-				nvidia,emem-configuration = <
-					0x40020001
-					0x80000012
-					0x00000001
-					0x00000001
-					0x00000002
-					0x00000000
-					0x00000002
-					0x00000001
-					0x00000003
-					0x00000008
-					0x00000003
-					0x00000002
-					0x00000003
-					0x00000006
-					0x06030203
-					0x000a0502
-					0x76230303
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-40800000 {
-				clock-frequency = <40800000>;
-
-				nvidia,emem-configuration = <
-					0xa0000001
-					0x80000017
-					0x00000001
-					0x00000001
-					0x00000002
-					0x00000000
-					0x00000002
-					0x00000001
-					0x00000003
-					0x00000008
-					0x00000003
-					0x00000002
-					0x00000003
-					0x00000006
-					0x06030203
-					0x000a0502
-					0x74a30303
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-68000000 {
-				clock-frequency = <68000000>;
-
-				nvidia,emem-configuration = <
-					0x00000001
-					0x8000001e
-					0x00000001
-					0x00000001
-					0x00000002
-					0x00000000
-					0x00000002
-					0x00000001
-					0x00000003
-					0x00000008
-					0x00000003
-					0x00000002
-					0x00000003
-					0x00000006
-					0x06030203
-					0x000a0502
-					0x74230403
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-102000000 {
-				clock-frequency = <102000000>;
-
-				nvidia,emem-configuration = <
-					0x08000001
-					0x80000026
-					0x00000001
-					0x00000001
-					0x00000003
-					0x00000000
-					0x00000002
-					0x00000001
-					0x00000003
-					0x00000008
-					0x00000003
-					0x00000002
-					0x00000003
-					0x00000006
-					0x06030203
-					0x000a0503
-					0x73c30504
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-204000000 {
-				clock-frequency = <204000000>;
-
-				nvidia,emem-configuration = <
-					0x01000003
-					0x80000040
-					0x00000001
-					0x00000001
-					0x00000004
-					0x00000002
-					0x00000003
-					0x00000001
-					0x00000003
-					0x00000008
-					0x00000003
-					0x00000002
-					0x00000004
-					0x00000006
-					0x06040203
-					0x000a0504
-					0x73840a05
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-300000000 {
-				clock-frequency = <300000000>;
-
-				nvidia,emem-configuration = <
-					0x08000004
-					0x80000040
-					0x00000001
-					0x00000002
-					0x00000007
-					0x00000004
-					0x00000004
-					0x00000001
-					0x00000002
-					0x00000007
-					0x00000002
-					0x00000002
-					0x00000004
-					0x00000006
-					0x06040202
-					0x000b0607
-					0x77450e08
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-396000000 {
-				clock-frequency = <396000000>;
-
-				nvidia,emem-configuration = <
-					0x0f000005
-					0x80000040
-					0x00000001
-					0x00000002
-					0x00000009
-					0x00000005
-					0x00000006
-					0x00000001
-					0x00000002
-					0x00000008
-					0x00000002
-					0x00000002
-					0x00000004
-					0x00000006
-					0x06040202
-					0x000d0709
-					0x7586120a
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-528000000 {
-				clock-frequency = <528000000>;
-
-				nvidia,emem-configuration = <
-					0x0f000007
-					0x80000040
-					0x00000002
-					0x00000003
-					0x0000000c
-					0x00000007
-					0x00000008
-					0x00000001
-					0x00000002
-					0x00000009
-					0x00000002
-					0x00000002
-					0x00000005
-					0x00000006
-					0x06050202
-					0x0010090c
-					0x7428180d
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-600000000 {
-				clock-frequency = <600000000>;
-
-				nvidia,emem-configuration = <
-					0x00000009
-					0x80000040
-					0x00000003
-					0x00000004
-					0x0000000e
-					0x00000009
-					0x0000000a
-					0x00000001
-					0x00000003
-					0x0000000b
-					0x00000002
-					0x00000002
-					0x00000005
-					0x00000007
-					0x07050202
-					0x00130b0e
-					0x73a91b0f
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-792000000 {
-				clock-frequency = <792000000>;
-
-				nvidia,emem-configuration = <
-					0x0e00000b
-					0x80000040
-					0x00000004
-					0x00000005
-					0x00000013
-					0x0000000c
-					0x0000000d
-					0x00000002
-					0x00000003
-					0x0000000c
-					0x00000002
-					0x00000002
-					0x00000006
-					0x00000008
-					0x08060202
-					0x00170e13
-					0x736c2414
-					0x70000f02
-					0x001f0000
-				>;
-			};
-
-			timing-924000000 {
-				clock-frequency = <924000000>;
-
-				nvidia,emem-configuration = <
-					0x0e00000d
-					0x80000040
-					0x00000005
-					0x00000006
-					0x00000016
-					0x0000000e
-					0x0000000f
-					0x00000002
-					0x00000004
-					0x0000000e
-					0x00000002
-					0x00000002
-					0x00000006
-					0x00000009
-					0x09060202
-					0x001a1016
-					0x734e2a17
-					0x70000f02
-					0x001f0000
-				>;
-			};
-		};
+	opp-table-actmon {
+		/delete-node/ opp-1200000000;
 	};
-};
 
-&emc_icc_dvfs_opp_table {
-	/delete-node/ opp@1200000000,1100;
-};
-
-&emc_bw_dfs_opp_table {
-	/delete-node/ opp@1200000000;
+	opp-table-emc {
+		/delete-node/ opp-1200000000-1100;
+	};
 };
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/nvidia/tegra124-jetson-tk1.dts
index 35ab296408e1..f09109be1152 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/nvidia/tegra124-jetson-tk1.dts
@@ -68,11 +68,7 @@
 		};
 	};
 
-	cec@70015000 {
-		status = "okay";
-	};
-
-	gpu@0,57000000 {
+	gpu@57000000 {
 		/*
 		 * Node left disabled on purpose - the bootloader will enable
 		 * it after having set the VPR up
@@ -1389,6 +1385,8 @@
 	 */
 	serial@70006000 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
 		status = "okay";
 	};
 
@@ -1401,11 +1399,15 @@
 	 */
 	serial@70006040 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
 		status = "okay";
 	};
 
 	/* DB9 serial port */
 	serial@70006300 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
@@ -1655,7 +1657,8 @@
 	spi@7000da00 {
 		status = "okay";
 		spi-max-frequency = <25000000>;
-		spi-flash@0 {
+
+		flash@0 {
 			compatible = "winbond,w25q32dw", "jedec,spi-nor";
 			reg = <0>;
 			spi-max-frequency = <20000000>;
@@ -1680,6 +1683,10 @@
 		};
 	};
 
+	cec@70015000 {
+		status = "okay";
+	};
+
 	/* Serial ATA */
 	sata@70020000 {
 		status = "okay";
@@ -1868,7 +1875,7 @@
 		vbus-supply = <&vdd_usb3_vbus>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
@@ -1883,7 +1890,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			label = "Power";
 			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
@@ -1892,7 +1899,7 @@
 		};
 	};
 
-	vdd_mux: regulator@0 {
+	vdd_mux: regulator-mux {
 		compatible = "regulator-fixed";
 		regulator-name = "+VDD_MUX";
 		regulator-min-microvolt = <12000000>;
@@ -1901,7 +1908,7 @@
 		regulator-boot-on;
 	};
 
-	vdd_5v0_sys: regulator@1 {
+	vdd_5v0_sys: regulator-5v0sys {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_SYS";
 		regulator-min-microvolt = <5000000>;
@@ -1911,7 +1918,7 @@
 		vin-supply = <&vdd_mux>;
 	};
 
-	vdd_3v3_sys: regulator@2 {
+	vdd_3v3_sys: regulator-3v3sys {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_SYS";
 		regulator-min-microvolt = <3300000>;
@@ -1921,7 +1928,7 @@
 		vin-supply = <&vdd_mux>;
 	};
 
-	vdd_3v3_run: regulator@3 {
+	vdd_3v3_run: regulator-3v3run {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_RUN";
 		regulator-min-microvolt = <3300000>;
@@ -1933,7 +1940,7 @@
 		vin-supply = <&vdd_3v3_sys>;
 	};
 
-	vdd_3v3_hdmi: regulator@4 {
+	vdd_3v3_hdmi: regulator-3v3hdmi {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
 		regulator-min-microvolt = <3300000>;
@@ -1941,7 +1948,7 @@
 		vin-supply = <&vdd_3v3_run>;
 	};
 
-	vdd_usb1_vbus: regulator@5 {
+	vdd_usb1_vbus: regulator-usb1 {
 		compatible = "regulator-fixed";
 		regulator-name = "+USB0_VBUS_SW";
 		regulator-min-microvolt = <5000000>;
@@ -1952,7 +1959,7 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_usb3_vbus: regulator@6 {
+	vdd_usb3_vbus: regulator-usb3 {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_USB_HS";
 		regulator-min-microvolt = <5000000>;
@@ -1963,7 +1970,7 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_3v3_lp0: regulator@7 {
+	vdd_3v3_lp0: regulator-lp0 {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_LP0";
 		regulator-min-microvolt = <3300000>;
@@ -1975,7 +1982,7 @@
 		vin-supply = <&vdd_3v3_sys>;
 	};
 
-	vdd_hdmi_pll: regulator@8 {
+	vdd_hdmi_pll: regulator-hdmipll {
 		compatible = "regulator-fixed";
 		regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
 		regulator-min-microvolt = <1050000>;
@@ -1984,7 +1991,7 @@
 		vin-supply = <&vdd_1v05_run>;
 	};
 
-	vdd_5v0_hdmi: regulator@9 {
+	vdd_5v0_hdmi: regulator-hdmicon {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_HDMI_CON";
 		regulator-min-microvolt = <5000000>;
@@ -1995,7 +2002,7 @@
 	};
 
 	/* Molex power connector */
-	vdd_5v0_sata: regulator@10 {
+	vdd_5v0_sata: regulator-5v0sata {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_SATA";
 		regulator-min-microvolt = <5000000>;
@@ -2005,7 +2012,7 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_12v0_sata: regulator@11 {
+	vdd_12v0_sata: regulator-12v0sata {
 		compatible = "regulator-fixed";
 		regulator-name = "+12V_SATA";
 		regulator-min-microvolt = <12000000>;
@@ -2044,7 +2051,7 @@
 	};
 
 	thermal-zones {
-		cpu {
+		cpu-thermal {
 			trips {
 				cpu-shutdown-trip {
 					temperature = <101000>;
@@ -2054,7 +2061,7 @@
 			};
 		};
 
-		mem {
+		mem-thermal {
 			trips {
 				mem-shutdown-trip {
 					temperature = <101000>;
@@ -2064,7 +2071,7 @@
 			};
 		};
 
-		gpu {
+		gpu-thermal {
 			trips {
 				gpu-shutdown-trip {
 					temperature = <101000>;
diff --git a/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi b/arch/arm/boot/dts/nvidia/tegra124-nyan-big-emc.dtsi
index a0f56cc9da5c..cadb1969f1cc 100644
--- a/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra124-nyan-big-emc.dtsi
@@ -1,9 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0
-/ {
-	apbmisc@70000800 {
-		nvidia,long-ram-code;
-	};
 
+#include <dt-bindings/clock/tegra124-car.h>
+
+/ {
 	clock@60006000 {
 		emc-timings-1 {
 			nvidia,ram-code = <1>;
@@ -14,60 +13,70 @@
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-20400000 {
 				clock-frequency = <20400000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-40800000 {
 				clock-frequency = <40800000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-68000000 {
 				clock-frequency = <68000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-102000000 {
 				clock-frequency = <102000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-204000000 {
 				clock-frequency = <204000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-300000000 {
 				clock-frequency = <300000000>;
 				nvidia,parent-clock-frequency = <600000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_C>;
 				clock-names = "emc-parent";
 			};
+
 			timing-396000000 {
 				clock-frequency = <396000000>;
 				nvidia,parent-clock-frequency = <792000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_M>;
 				clock-names = "emc-parent";
 			};
+
 			timing-528000000 {
 				clock-frequency = <528000000>;
 				nvidia,parent-clock-frequency = <528000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
 				clock-names = "emc-parent";
 			};
+
 			timing-600000000 {
 				clock-frequency = <600000000>;
 				nvidia,parent-clock-frequency = <600000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_C_UD>;
 				clock-names = "emc-parent";
 			};
+
 			timing-792000000 {
 				clock-frequency = <792000000>;
 				nvidia,parent-clock-frequency = <792000000>;
@@ -85,60 +94,70 @@
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-20400000 {
 				clock-frequency = <20400000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-40800000 {
 				clock-frequency = <40800000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-68000000 {
 				clock-frequency = <68000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-102000000 {
 				clock-frequency = <102000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-204000000 {
 				clock-frequency = <204000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-300000000 {
 				clock-frequency = <300000000>;
 				nvidia,parent-clock-frequency = <600000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_C>;
 				clock-names = "emc-parent";
 			};
+
 			timing-396000000 {
 				clock-frequency = <396000000>;
 				nvidia,parent-clock-frequency = <792000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_M>;
 				clock-names = "emc-parent";
 			};
+
 			timing-528000000 {
 				clock-frequency = <528000000>;
 				nvidia,parent-clock-frequency = <528000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
 				clock-names = "emc-parent";
 			};
+
 			timing-600000000 {
 				clock-frequency = <600000000>;
 				nvidia,parent-clock-frequency = <600000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_C_UD>;
 				clock-names = "emc-parent";
 			};
+
 			timing-792000000 {
 				clock-frequency = <792000000>;
 				nvidia,parent-clock-frequency = <792000000>;
@@ -156,60 +175,70 @@
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-20400000 {
 				clock-frequency = <20400000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-40800000 {
 				clock-frequency = <40800000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-68000000 {
 				clock-frequency = <68000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-102000000 {
 				clock-frequency = <102000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-204000000 {
 				clock-frequency = <204000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-300000000 {
 				clock-frequency = <300000000>;
 				nvidia,parent-clock-frequency = <600000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_C>;
 				clock-names = "emc-parent";
 			};
+
 			timing-396000000 {
 				clock-frequency = <396000000>;
 				nvidia,parent-clock-frequency = <792000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_M>;
 				clock-names = "emc-parent";
 			};
+
 			timing-528000000 {
 				clock-frequency = <528000000>;
 				nvidia,parent-clock-frequency = <528000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
 				clock-names = "emc-parent";
 			};
+
 			timing-600000000 {
 				clock-frequency = <600000000>;
 				nvidia,parent-clock-frequency = <600000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_C_UD>;
 				clock-names = "emc-parent";
 			};
+
 			timing-792000000 {
 				clock-frequency = <792000000>;
 				nvidia,parent-clock-frequency = <792000000>;
@@ -219,6 +248,882 @@
 		};
 	};
 
+	apbmisc@70000800 {
+		nvidia,long-ram-code;
+	};
+
+	memory-controller@70019000 {
+		emc-timings-1 {
+			nvidia,ram-code = <1>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emem-configuration = <
+					0x40040001 /* MC_EMEM_ARB_CFG */
+					0x8000000a /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
+					0x77e30303 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emem-configuration = <
+					0x40020001 /* MC_EMEM_ARB_CFG */
+					0x80000012 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
+					0x76230303 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emem-configuration = <
+					0xa0000001 /* MC_EMEM_ARB_CFG */
+					0x80000017 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
+					0x74a30303 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emem-configuration = <
+					0x00000001 /* MC_EMEM_ARB_CFG */
+					0x8000001e /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
+					0x74230403 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = <
+					0x08000001 /* MC_EMEM_ARB_CFG */
+					0x80000026 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0403 /* MC_EMEM_ARB_DA_COVERS */
+					0x73c30504 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = <
+					0x01000003 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000004 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06040203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0405 /* MC_EMEM_ARB_DA_COVERS */
+					0x73840a06 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emem-configuration = <
+					0x08000004 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000007 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000005 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000007 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06040202 /* MC_EMEM_ARB_DA_TURNS */
+					0x000b0607 /* MC_EMEM_ARB_DA_COVERS */
+					0x77450e08 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000005 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000009 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000007 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06040202 /* MC_EMEM_ARB_DA_TURNS */
+					0x000d0709 /* MC_EMEM_ARB_DA_COVERS */
+					0x7586120a /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000007 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RP */
+					0x0000000d /* MC_EMEM_ARB_TIMING_RC */
+					0x00000008 /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000a /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000009 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000005 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06050202 /* MC_EMEM_ARB_DA_TURNS */
+					0x0010090d /* MC_EMEM_ARB_DA_COVERS */
+					0x7428180e /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emem-configuration = <
+					0x00000009 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RP */
+					0x0000000e /* MC_EMEM_ARB_TIMING_RC */
+					0x00000009 /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000b /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x0000000b /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000005 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000007 /* MC_EMEM_ARB_TIMING_W2R */
+					0x07050202 /* MC_EMEM_ARB_DA_TURNS */
+					0x00130b0e /* MC_EMEM_ARB_DA_COVERS */
+					0x73a91b0f /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emem-configuration = <
+					0x0e00000b /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000013 /* MC_EMEM_ARB_TIMING_RC */
+					0x0000000c /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000f /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000008 /* MC_EMEM_ARB_TIMING_W2R */
+					0x08060202 /* MC_EMEM_ARB_DA_TURNS */
+					0x00160d13 /* MC_EMEM_ARB_DA_COVERS */
+					0x734c2414 /* MC_EMEM_ARB_MISC0 */
+					0x70000f02 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+		};
+
+		emc-timings-4 {
+			nvidia,ram-code = <4>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emem-configuration = <
+					0x40040001 /* MC_EMEM_ARB_CFG */
+					0x8000000a /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x77e30303 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emem-configuration = <
+					0x40020001 /* MC_EMEM_ARB_CFG */
+					0x80000012 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x77430303 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emem-configuration = <
+					0xa0000001 /* MC_EMEM_ARB_CFG */
+					0x80000017 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x75e30303 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emem-configuration = <
+					0x00000001 /* MC_EMEM_ARB_CFG */
+					0x8000001e /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x75430403 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = <
+					0x08000001 /* MC_EMEM_ARB_CFG */
+					0x80000026 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0503 /* MC_EMEM_ARB_DA_COVERS */
+					0x74e30504 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = <
+					0x01000003 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000004 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06040203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0504 /* MC_EMEM_ARB_DA_COVERS */
+					0x74a40a05 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emem-configuration = <
+					0x08000004 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000007 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000005 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000007 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06040202 /* MC_EMEM_ARB_DA_TURNS */
+					0x000b0607 /* MC_EMEM_ARB_DA_COVERS */
+					0x77450e08 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000005 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000009 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000007 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06040202 /* MC_EMEM_ARB_DA_TURNS */
+					0x000d0709 /* MC_EMEM_ARB_DA_COVERS */
+					0x7586120a /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000007 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RP */
+					0x0000000c /* MC_EMEM_ARB_TIMING_RC */
+					0x00000007 /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000a /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000009 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000005 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06050202 /* MC_EMEM_ARB_DA_TURNS */
+					0x0010090c /* MC_EMEM_ARB_DA_COVERS */
+					0x7488180d /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emem-configuration = <
+					0x00000009 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RP */
+					0x0000000e /* MC_EMEM_ARB_TIMING_RC */
+					0x00000009 /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000b /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x0000000b /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000005 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000007 /* MC_EMEM_ARB_TIMING_W2R */
+					0x07050202 /* MC_EMEM_ARB_DA_TURNS */
+					0x00130b0e /* MC_EMEM_ARB_DA_COVERS */
+					0x74691b0f /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emem-configuration = <
+					0x0e00000b /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000013 /* MC_EMEM_ARB_TIMING_RC */
+					0x0000000c /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000f /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000008 /* MC_EMEM_ARB_TIMING_W2R */
+					0x08060202 /* MC_EMEM_ARB_DA_TURNS */
+					0x00170e13 /* MC_EMEM_ARB_DA_COVERS */
+					0x746c2414 /* MC_EMEM_ARB_MISC0 */
+					0x70000f02 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+		};
+
+		emc-timings-6 {
+			nvidia,ram-code = <6>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emem-configuration = <
+					0x40040001 /* MC_EMEM_ARB_CFG */
+					0x8000000a /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
+					0x77e30303 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emem-configuration = <
+					0x40020001 /* MC_EMEM_ARB_CFG */
+					0x80000012 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
+					0x76230303 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emem-configuration = <
+					0xa0000001 /* MC_EMEM_ARB_CFG */
+					0x80000017 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
+					0x74a30303 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emem-configuration = <
+					0x00000001 /* MC_EMEM_ARB_CFG */
+					0x8000001e /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
+					0x74230403 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = <
+					0x08000001 /* MC_EMEM_ARB_CFG */
+					0x80000026 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0403 /* MC_EMEM_ARB_DA_COVERS */
+					0x73c30504 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = <
+					0x01000003 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000004 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06040203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0405 /* MC_EMEM_ARB_DA_COVERS */
+					0x73840a06 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emem-configuration = <
+					0x08000004 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000007 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000005 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000007 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06040202 /* MC_EMEM_ARB_DA_TURNS */
+					0x000b0607 /* MC_EMEM_ARB_DA_COVERS */
+					0x77450e08 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000005 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000009 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000007 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06040202 /* MC_EMEM_ARB_DA_TURNS */
+					0x000d0709 /* MC_EMEM_ARB_DA_COVERS */
+					0x7586120a /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000007 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RP */
+					0x0000000d /* MC_EMEM_ARB_TIMING_RC */
+					0x00000008 /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000a /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000009 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000005 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06050202 /* MC_EMEM_ARB_DA_TURNS */
+					0x0010090d /* MC_EMEM_ARB_DA_COVERS */
+					0x7428180e /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emem-configuration = <
+					0x00000009 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RP */
+					0x0000000e /* MC_EMEM_ARB_TIMING_RC */
+					0x00000009 /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000b /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x0000000b /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000005 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000007 /* MC_EMEM_ARB_TIMING_W2R */
+					0x07050202 /* MC_EMEM_ARB_DA_TURNS */
+					0x00130b0e /* MC_EMEM_ARB_DA_COVERS */
+					0x73a91b0f /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emem-configuration = <
+					0x0e00000b /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000013 /* MC_EMEM_ARB_TIMING_RC */
+					0x0000000c /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000f /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000008 /* MC_EMEM_ARB_TIMING_W2R */
+					0x08060202 /* MC_EMEM_ARB_DA_TURNS */
+					0x00160d13 /* MC_EMEM_ARB_DA_COVERS */
+					0x734c2414 /* MC_EMEM_ARB_MISC0 */
+					0x70000f02 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+		};
+	};
+
 	external-memory-controller@7001b000 {
 		emc-timings-1 {
 			nvidia,ram-code = <1>;
@@ -5777,885 +6682,13 @@
 		};
 	};
 
-	memory-controller@70019000 {
-		emc-timings-1 {
-			nvidia,ram-code = <1>;
-
-			timing-12750000 {
-				clock-frequency = <12750000>;
-
-				nvidia,emem-configuration = <
-					0x40040001 /* MC_EMEM_ARB_CFG */
-					0x8000000a /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
-					0x77e30303 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-20400000 {
-				clock-frequency = <20400000>;
-
-				nvidia,emem-configuration = <
-					0x40020001 /* MC_EMEM_ARB_CFG */
-					0x80000012 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
-					0x76230303 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-40800000 {
-				clock-frequency = <40800000>;
-
-				nvidia,emem-configuration = <
-					0xa0000001 /* MC_EMEM_ARB_CFG */
-					0x80000017 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
-					0x74a30303 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-68000000 {
-				clock-frequency = <68000000>;
-
-				nvidia,emem-configuration = <
-					0x00000001 /* MC_EMEM_ARB_CFG */
-					0x8000001e /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
-					0x74230403 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-102000000 {
-				clock-frequency = <102000000>;
-
-				nvidia,emem-configuration = <
-					0x08000001 /* MC_EMEM_ARB_CFG */
-					0x80000026 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0403 /* MC_EMEM_ARB_DA_COVERS */
-					0x73c30504 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-204000000 {
-				clock-frequency = <204000000>;
-
-				nvidia,emem-configuration = <
-					0x01000003 /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000005 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000004 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06040203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0405 /* MC_EMEM_ARB_DA_COVERS */
-					0x73840a06 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-300000000 {
-				clock-frequency = <300000000>;
-
-				nvidia,emem-configuration = <
-					0x08000004 /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000007 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000004 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000005 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000007 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06040202 /* MC_EMEM_ARB_DA_TURNS */
-					0x000b0607 /* MC_EMEM_ARB_DA_COVERS */
-					0x77450e08 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-396000000 {
-				clock-frequency = <396000000>;
-
-				nvidia,emem-configuration = <
-					0x0f000005 /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000009 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000005 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000007 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06040202 /* MC_EMEM_ARB_DA_TURNS */
-					0x000d0709 /* MC_EMEM_ARB_DA_COVERS */
-					0x7586120a /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-528000000 {
-				clock-frequency = <528000000>;
-
-				nvidia,emem-configuration = <
-					0x0f000007 /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RP */
-					0x0000000d /* MC_EMEM_ARB_TIMING_RC */
-					0x00000008 /* MC_EMEM_ARB_TIMING_RAS */
-					0x0000000a /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000009 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000005 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06050202 /* MC_EMEM_ARB_DA_TURNS */
-					0x0010090d /* MC_EMEM_ARB_DA_COVERS */
-					0x7428180e /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-600000000 {
-				clock-frequency = <600000000>;
-
-				nvidia,emem-configuration = <
-					0x00000009 /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000004 /* MC_EMEM_ARB_TIMING_RP */
-					0x0000000e /* MC_EMEM_ARB_TIMING_RC */
-					0x00000009 /* MC_EMEM_ARB_TIMING_RAS */
-					0x0000000b /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x0000000b /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000005 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000007 /* MC_EMEM_ARB_TIMING_W2R */
-					0x07050202 /* MC_EMEM_ARB_DA_TURNS */
-					0x00130b0e /* MC_EMEM_ARB_DA_COVERS */
-					0x73a91b0f /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-792000000 {
-				clock-frequency = <792000000>;
-
-				nvidia,emem-configuration = <
-					0x0e00000b /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000004 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000005 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000013 /* MC_EMEM_ARB_TIMING_RC */
-					0x0000000c /* MC_EMEM_ARB_TIMING_RAS */
-					0x0000000f /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000008 /* MC_EMEM_ARB_TIMING_W2R */
-					0x08060202 /* MC_EMEM_ARB_DA_TURNS */
-					0x00160d13 /* MC_EMEM_ARB_DA_COVERS */
-					0x734c2414 /* MC_EMEM_ARB_MISC0 */
-					0x70000f02 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-		};
-
-		emc-timings-4 {
-			nvidia,ram-code = <4>;
-
-			timing-12750000 {
-				clock-frequency = <12750000>;
-
-				nvidia,emem-configuration = <
-					0x40040001 /* MC_EMEM_ARB_CFG */
-					0x8000000a /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
-					0x77e30303 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-20400000 {
-				clock-frequency = <20400000>;
-
-				nvidia,emem-configuration = <
-					0x40020001 /* MC_EMEM_ARB_CFG */
-					0x80000012 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
-					0x77430303 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-40800000 {
-				clock-frequency = <40800000>;
-
-				nvidia,emem-configuration = <
-					0xa0000001 /* MC_EMEM_ARB_CFG */
-					0x80000017 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
-					0x75e30303 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-68000000 {
-				clock-frequency = <68000000>;
-
-				nvidia,emem-configuration = <
-					0x00000001 /* MC_EMEM_ARB_CFG */
-					0x8000001e /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
-					0x75430403 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-102000000 {
-				clock-frequency = <102000000>;
-
-				nvidia,emem-configuration = <
-					0x08000001 /* MC_EMEM_ARB_CFG */
-					0x80000026 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0503 /* MC_EMEM_ARB_DA_COVERS */
-					0x74e30504 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-204000000 {
-				clock-frequency = <204000000>;
-
-				nvidia,emem-configuration = <
-					0x01000003 /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000004 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000004 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06040203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0504 /* MC_EMEM_ARB_DA_COVERS */
-					0x74a40a05 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-300000000 {
-				clock-frequency = <300000000>;
-
-				nvidia,emem-configuration = <
-					0x08000004 /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000007 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000004 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000005 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000007 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06040202 /* MC_EMEM_ARB_DA_TURNS */
-					0x000b0607 /* MC_EMEM_ARB_DA_COVERS */
-					0x77450e08 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-396000000 {
-				clock-frequency = <396000000>;
-
-				nvidia,emem-configuration = <
-					0x0f000005 /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000009 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000005 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000007 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06040202 /* MC_EMEM_ARB_DA_TURNS */
-					0x000d0709 /* MC_EMEM_ARB_DA_COVERS */
-					0x7586120a /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-528000000 {
-				clock-frequency = <528000000>;
-
-				nvidia,emem-configuration = <
-					0x0f000007 /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RP */
-					0x0000000c /* MC_EMEM_ARB_TIMING_RC */
-					0x00000007 /* MC_EMEM_ARB_TIMING_RAS */
-					0x0000000a /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000009 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000005 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06050202 /* MC_EMEM_ARB_DA_TURNS */
-					0x0010090c /* MC_EMEM_ARB_DA_COVERS */
-					0x7488180d /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-600000000 {
-				clock-frequency = <600000000>;
-
-				nvidia,emem-configuration = <
-					0x00000009 /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000004 /* MC_EMEM_ARB_TIMING_RP */
-					0x0000000e /* MC_EMEM_ARB_TIMING_RC */
-					0x00000009 /* MC_EMEM_ARB_TIMING_RAS */
-					0x0000000b /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x0000000b /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000005 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000007 /* MC_EMEM_ARB_TIMING_W2R */
-					0x07050202 /* MC_EMEM_ARB_DA_TURNS */
-					0x00130b0e /* MC_EMEM_ARB_DA_COVERS */
-					0x74691b0f /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-792000000 {
-				clock-frequency = <792000000>;
-
-				nvidia,emem-configuration = <
-					0x0e00000b /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000004 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000005 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000013 /* MC_EMEM_ARB_TIMING_RC */
-					0x0000000c /* MC_EMEM_ARB_TIMING_RAS */
-					0x0000000f /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000008 /* MC_EMEM_ARB_TIMING_W2R */
-					0x08060202 /* MC_EMEM_ARB_DA_TURNS */
-					0x00170e13 /* MC_EMEM_ARB_DA_COVERS */
-					0x746c2414 /* MC_EMEM_ARB_MISC0 */
-					0x70000f02 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-		};
-
-		emc-timings-6 {
-			nvidia,ram-code = <6>;
-
-			timing-12750000 {
-				clock-frequency = <12750000>;
-
-				nvidia,emem-configuration = <
-					0x40040001 /* MC_EMEM_ARB_CFG */
-					0x8000000a /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
-					0x77e30303 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-20400000 {
-				clock-frequency = <20400000>;
-
-				nvidia,emem-configuration = <
-					0x40020001 /* MC_EMEM_ARB_CFG */
-					0x80000012 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
-					0x76230303 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-40800000 {
-				clock-frequency = <40800000>;
-
-				nvidia,emem-configuration = <
-					0xa0000001 /* MC_EMEM_ARB_CFG */
-					0x80000017 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
-					0x74a30303 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-68000000 {
-				clock-frequency = <68000000>;
-
-				nvidia,emem-configuration = <
-					0x00000001 /* MC_EMEM_ARB_CFG */
-					0x8000001e /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
-					0x74230403 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-102000000 {
-				clock-frequency = <102000000>;
-
-				nvidia,emem-configuration = <
-					0x08000001 /* MC_EMEM_ARB_CFG */
-					0x80000026 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0403 /* MC_EMEM_ARB_DA_COVERS */
-					0x73c30504 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-204000000 {
-				clock-frequency = <204000000>;
-
-				nvidia,emem-configuration = <
-					0x01000003 /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000005 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000004 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06040203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0405 /* MC_EMEM_ARB_DA_COVERS */
-					0x73840a06 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-300000000 {
-				clock-frequency = <300000000>;
-
-				nvidia,emem-configuration = <
-					0x08000004 /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000007 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000004 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000005 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000007 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06040202 /* MC_EMEM_ARB_DA_TURNS */
-					0x000b0607 /* MC_EMEM_ARB_DA_COVERS */
-					0x77450e08 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-396000000 {
-				clock-frequency = <396000000>;
-
-				nvidia,emem-configuration = <
-					0x0f000005 /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000009 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000005 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000007 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06040202 /* MC_EMEM_ARB_DA_TURNS */
-					0x000d0709 /* MC_EMEM_ARB_DA_COVERS */
-					0x7586120a /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-528000000 {
-				clock-frequency = <528000000>;
-
-				nvidia,emem-configuration = <
-					0x0f000007 /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RP */
-					0x0000000d /* MC_EMEM_ARB_TIMING_RC */
-					0x00000008 /* MC_EMEM_ARB_TIMING_RAS */
-					0x0000000a /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000009 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000005 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06050202 /* MC_EMEM_ARB_DA_TURNS */
-					0x0010090d /* MC_EMEM_ARB_DA_COVERS */
-					0x7428180e /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-600000000 {
-				clock-frequency = <600000000>;
-
-				nvidia,emem-configuration = <
-					0x00000009 /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000004 /* MC_EMEM_ARB_TIMING_RP */
-					0x0000000e /* MC_EMEM_ARB_TIMING_RC */
-					0x00000009 /* MC_EMEM_ARB_TIMING_RAS */
-					0x0000000b /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x0000000b /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000005 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000007 /* MC_EMEM_ARB_TIMING_W2R */
-					0x07050202 /* MC_EMEM_ARB_DA_TURNS */
-					0x00130b0e /* MC_EMEM_ARB_DA_COVERS */
-					0x73a91b0f /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-792000000 {
-				clock-frequency = <792000000>;
-
-				nvidia,emem-configuration = <
-					0x0e00000b /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000004 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000005 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000013 /* MC_EMEM_ARB_TIMING_RC */
-					0x0000000c /* MC_EMEM_ARB_TIMING_RAS */
-					0x0000000f /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000008 /* MC_EMEM_ARB_TIMING_W2R */
-					0x08060202 /* MC_EMEM_ARB_DA_TURNS */
-					0x00160d13 /* MC_EMEM_ARB_DA_COVERS */
-					0x734c2414 /* MC_EMEM_ARB_MISC0 */
-					0x70000f02 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-		};
+	opp-table-actmon {
+		/delete-node/ opp-924000000;
+		/delete-node/ opp-1200000000;
 	};
-};
 
-&emc_icc_dvfs_opp_table {
-	/delete-node/ opp@924000000,1100;
-	/delete-node/ opp@1200000000,1100;
-};
-
-&emc_bw_dfs_opp_table {
-	/delete-node/ opp@924000000;
-	/delete-node/ opp@1200000000;
+	opp-table-emc {
+		/delete-node/ opp-924000000-1100;
+		/delete-node/ opp-1200000000-1100;
+	};
 };
diff --git a/arch/arm/boot/dts/nvidia/tegra124-nyan-big-fhd.dts b/arch/arm/boot/dts/nvidia/tegra124-nyan-big-fhd.dts
new file mode 100644
index 000000000000..4db43324dafa
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra124-nyan-big-fhd.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra124-nyan-big.dts"
+
+/ {
+	/* Version of Nyan Big with 1080p panel */
+	host1x@50000000 {
+		dpaux@545c0000 {
+			aux-bus {
+				panel: panel {
+					compatible = "auo,b133htn01";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra124-nyan-big.dts b/arch/arm/boot/dts/nvidia/tegra124-nyan-big.dts
index 1d2aac2cb6d0..8bca9599ad6e 100644
--- a/arch/arm/boot/dts/tegra124-nyan-big.dts
+++ b/arch/arm/boot/dts/nvidia/tegra124-nyan-big.dts
@@ -13,30 +13,23 @@
 		     "google,nyan-big-rev1", "google,nyan-big-rev0",
 		     "google,nyan-big", "google,nyan", "nvidia,tegra124";
 
-	panel: panel {
-		compatible = "auo,b133xtn01";
-
-		power-supply = <&vdd_3v3_panel>;
-		backlight = <&backlight>;
-		ddc-i2c-bus = <&dpaux>;
-	};
-
-	mmc@700b0400 { /* SD Card on this bus */
-		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
-	};
-
-	sound {
-		compatible = "nvidia,tegra-audio-max98090-nyan-big",
-			     "nvidia,tegra-audio-max98090-nyan",
-			     "nvidia,tegra-audio-max98090";
-		nvidia,model = "GoogleNyanBig";
+	host1x@50000000 {
+		dpaux@545c0000 {
+			aux-bus {
+				panel: panel {
+					compatible = "auo,b133xtn01";
+					power-supply = <&vdd_3v3_panel>;
+					backlight = <&backlight>;
+				};
+			};
+		};
 	};
 
 	pinmux@70000868 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinmux_default>;
 
-		pinmux_default: common {
+		pinmux_default: pinmux {
 			clk_32k_out_pa0 {
 				nvidia,pins = "clk_32k_out_pa0";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -1341,4 +1334,15 @@
 			};
 		};
 	};
+
+	mmc@700b0400 { /* SD Card on this bus */
+		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-max98090-nyan-big",
+			     "nvidia,tegra-audio-max98090-nyan",
+			     "nvidia,tegra-audio-max98090";
+		nvidia,model = "GoogleNyanBig";
+	};
 };
diff --git a/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi b/arch/arm/boot/dts/nvidia/tegra124-nyan-blaze-emc.dtsi
index 35c98734d35f..e8dcc4f51fc5 100644
--- a/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra124-nyan-blaze-emc.dtsi
@@ -1,4 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/clock/tegra124-car.h>
+
 / {
 	clock@60006000 {
 		emc-timings-1 {
@@ -10,55 +13,65 @@
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-20400000 {
 				clock-frequency = <20400000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-40800000 {
 				clock-frequency = <40800000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-68000000 {
 				clock-frequency = <68000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-102000000 {
 				clock-frequency = <102000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-204000000 {
 				clock-frequency = <204000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-300000000 {
 				clock-frequency = <300000000>;
 				nvidia,parent-clock-frequency = <600000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_C>;
 				clock-names = "emc-parent";
 			};
+
 			timing-396000000 {
 				clock-frequency = <396000000>;
 				nvidia,parent-clock-frequency = <792000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_M>;
 				clock-names = "emc-parent";
 			};
+
 			/* TODO: Add 528MHz frequency */
+
 			timing-600000000 {
 				clock-frequency = <600000000>;
 				nvidia,parent-clock-frequency = <600000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_C_UD>;
 				clock-names = "emc-parent";
 			};
+
 			timing-792000000 {
 				clock-frequency = <792000000>;
 				nvidia,parent-clock-frequency = <792000000>;
@@ -68,6 +81,298 @@
 		};
 	};
 
+	memory-controller@70019000 {
+		emc-timings-1 {
+			nvidia,ram-code = <1>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emem-configuration = <
+					0x40040001
+					0x8000000a
+					0x00000001
+					0x00000001
+					0x00000002
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000002
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0402
+					0x77e30303
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emem-configuration = <
+					0x40020001
+					0x80000012
+					0x00000001
+					0x00000001
+					0x00000002
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000002
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0402
+					0x76230303
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emem-configuration = <
+					0xa0000001
+					0x80000017
+					0x00000001
+					0x00000001
+					0x00000002
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000002
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0402
+					0x74a30303
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emem-configuration = <
+					0x00000001
+					0x8000001e
+					0x00000001
+					0x00000001
+					0x00000002
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000002
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0402
+					0x74230403
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = <
+					0x08000001
+					0x80000026
+					0x00000001
+					0x00000001
+					0x00000003
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000002
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0403
+					0x73c30504
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = <
+					0x01000003
+					0x80000040
+					0x00000001
+					0x00000001
+					0x00000005
+					0x00000002
+					0x00000004
+					0x00000001
+					0x00000002
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000004
+					0x00000006
+					0x06040203
+					0x000a0405
+					0x73840a06
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emem-configuration = <
+					0x08000004
+					0x80000040
+					0x00000001
+					0x00000002
+					0x00000007
+					0x00000004
+					0x00000005
+					0x00000001
+					0x00000002
+					0x00000007
+					0x00000002
+					0x00000002
+					0x00000004
+					0x00000006
+					0x06040202
+					0x000b0607
+					0x77450e08
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000005
+					0x80000040
+					0x00000001
+					0x00000002
+					0x00000009
+					0x00000005
+					0x00000007
+					0x00000001
+					0x00000002
+					0x00000008
+					0x00000002
+					0x00000002
+					0x00000004
+					0x00000006
+					0x06040202
+					0x000d0709
+					0x7586120a
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000007
+					0x80000040
+					0x00000002
+					0x00000003
+					0x0000000d
+					0x00000008
+					0x0000000a
+					0x00000001
+					0x00000002
+					0x00000009
+					0x00000002
+					0x00000002
+					0x00000005
+					0x00000006
+					0x06050202
+					0x0010090d
+					0x7428180e
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emem-configuration = <
+					0x00000009
+					0x80000040
+					0x00000003
+					0x00000004
+					0x0000000e
+					0x00000009
+					0x0000000b
+					0x00000001
+					0x00000003
+					0x0000000b
+					0x00000002
+					0x00000002
+					0x00000005
+					0x00000007
+					0x07050202
+					0x00130b0e
+					0x73a91b0f
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emem-configuration = <
+					0x0e00000b
+					0x80000040
+					0x00000004
+					0x00000005
+					0x00000013
+					0x0000000c
+					0x0000000f
+					0x00000002
+					0x00000003
+					0x0000000c
+					0x00000002
+					0x00000002
+					0x00000006
+					0x00000008
+					0x08060202
+					0x00160d13
+					0x734c2414
+					0x70000f02
+					0x001f0000
+				>;
+			};
+		};
+	};
+
 	external-memory-controller@7001b000 {
 		emc-timings-1 {
 			nvidia,ram-code = <1>;
@@ -1751,310 +2056,16 @@
 					0x0000000f
 				>;
 			};
-
 		};
 	};
 
-	memory-controller@70019000 {
-		emc-timings-1 {
-			nvidia,ram-code = <1>;
-
-
-			timing-12750000 {
-				clock-frequency = <12750000>;
-
-				nvidia,emem-configuration = <
-					0x40040001
-					0x8000000a
-					0x00000001
-					0x00000001
-					0x00000002
-					0x00000000
-					0x00000002
-					0x00000001
-					0x00000002
-					0x00000008
-					0x00000003
-					0x00000002
-					0x00000003
-					0x00000006
-					0x06030203
-					0x000a0402
-					0x77e30303
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-20400000 {
-				clock-frequency = <20400000>;
-
-				nvidia,emem-configuration = <
-					0x40020001
-					0x80000012
-					0x00000001
-					0x00000001
-					0x00000002
-					0x00000000
-					0x00000002
-					0x00000001
-					0x00000002
-					0x00000008
-					0x00000003
-					0x00000002
-					0x00000003
-					0x00000006
-					0x06030203
-					0x000a0402
-					0x76230303
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-40800000 {
-				clock-frequency = <40800000>;
-
-				nvidia,emem-configuration = <
-					0xa0000001
-					0x80000017
-					0x00000001
-					0x00000001
-					0x00000002
-					0x00000000
-					0x00000002
-					0x00000001
-					0x00000002
-					0x00000008
-					0x00000003
-					0x00000002
-					0x00000003
-					0x00000006
-					0x06030203
-					0x000a0402
-					0x74a30303
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-68000000 {
-				clock-frequency = <68000000>;
-
-				nvidia,emem-configuration = <
-					0x00000001
-					0x8000001e
-					0x00000001
-					0x00000001
-					0x00000002
-					0x00000000
-					0x00000002
-					0x00000001
-					0x00000002
-					0x00000008
-					0x00000003
-					0x00000002
-					0x00000003
-					0x00000006
-					0x06030203
-					0x000a0402
-					0x74230403
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-102000000 {
-				clock-frequency = <102000000>;
-
-				nvidia,emem-configuration = <
-					0x08000001
-					0x80000026
-					0x00000001
-					0x00000001
-					0x00000003
-					0x00000000
-					0x00000002
-					0x00000001
-					0x00000002
-					0x00000008
-					0x00000003
-					0x00000002
-					0x00000003
-					0x00000006
-					0x06030203
-					0x000a0403
-					0x73c30504
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-204000000 {
-				clock-frequency = <204000000>;
-
-				nvidia,emem-configuration = <
-					0x01000003
-					0x80000040
-					0x00000001
-					0x00000001
-					0x00000005
-					0x00000002
-					0x00000004
-					0x00000001
-					0x00000002
-					0x00000008
-					0x00000003
-					0x00000002
-					0x00000004
-					0x00000006
-					0x06040203
-					0x000a0405
-					0x73840a06
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-300000000 {
-				clock-frequency = <300000000>;
-
-				nvidia,emem-configuration = <
-					0x08000004
-					0x80000040
-					0x00000001
-					0x00000002
-					0x00000007
-					0x00000004
-					0x00000005
-					0x00000001
-					0x00000002
-					0x00000007
-					0x00000002
-					0x00000002
-					0x00000004
-					0x00000006
-					0x06040202
-					0x000b0607
-					0x77450e08
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-396000000 {
-				clock-frequency = <396000000>;
-
-				nvidia,emem-configuration = <
-					0x0f000005
-					0x80000040
-					0x00000001
-					0x00000002
-					0x00000009
-					0x00000005
-					0x00000007
-					0x00000001
-					0x00000002
-					0x00000008
-					0x00000002
-					0x00000002
-					0x00000004
-					0x00000006
-					0x06040202
-					0x000d0709
-					0x7586120a
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-528000000 {
-				clock-frequency = <528000000>;
-
-				nvidia,emem-configuration = <
-					0x0f000007
-					0x80000040
-					0x00000002
-					0x00000003
-					0x0000000d
-					0x00000008
-					0x0000000a
-					0x00000001
-					0x00000002
-					0x00000009
-					0x00000002
-					0x00000002
-					0x00000005
-					0x00000006
-					0x06050202
-					0x0010090d
-					0x7428180e
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-600000000 {
-				clock-frequency = <600000000>;
-
-				nvidia,emem-configuration = <
-					0x00000009
-					0x80000040
-					0x00000003
-					0x00000004
-					0x0000000e
-					0x00000009
-					0x0000000b
-					0x00000001
-					0x00000003
-					0x0000000b
-					0x00000002
-					0x00000002
-					0x00000005
-					0x00000007
-					0x07050202
-					0x00130b0e
-					0x73a91b0f
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-792000000 {
-				clock-frequency = <792000000>;
-
-				nvidia,emem-configuration = <
-					0x0e00000b
-					0x80000040
-					0x00000004
-					0x00000005
-					0x00000013
-					0x0000000c
-					0x0000000f
-					0x00000002
-					0x00000003
-					0x0000000c
-					0x00000002
-					0x00000002
-					0x00000006
-					0x00000008
-					0x08060202
-					0x00160d13
-					0x734c2414
-					0x70000f02
-					0x001f0000
-				>;
-			};
-		};
+	opp-table-actmon {
+		/delete-node/ opp-924000000;
+		/delete-node/ opp-1200000000;
 	};
-};
-
-&emc_icc_dvfs_opp_table {
-	/delete-node/ opp@924000000,1100;
-	/delete-node/ opp@1200000000,1100;
-};
 
-&emc_bw_dfs_opp_table {
-	/delete-node/ opp@924000000;
-	/delete-node/ opp@1200000000;
+	opp-table-emc {
+		/delete-node/ opp-924000000-1100;
+		/delete-node/ opp-1200000000-1100;
+	};
 };
diff --git a/arch/arm/boot/dts/tegra124-nyan-blaze.dts b/arch/arm/boot/dts/nvidia/tegra124-nyan-blaze.dts
index 677babde6460..432540c10065 100644
--- a/arch/arm/boot/dts/tegra124-nyan-blaze.dts
+++ b/arch/arm/boot/dts/nvidia/tegra124-nyan-blaze.dts
@@ -15,26 +15,23 @@
 		     "google,nyan-blaze-rev0", "google,nyan-blaze",
 		     "google,nyan", "nvidia,tegra124";
 
-	panel: panel {
-		compatible = "samsung,ltn140at29-301";
-
-		power-supply = <&vdd_3v3_panel>;
-		backlight = <&backlight>;
-		ddc-i2c-bus = <&dpaux>;
-	};
-
-	sound {
-		compatible = "nvidia,tegra-audio-max98090-nyan-blaze",
-			     "nvidia,tegra-audio-max98090-nyan",
-			     "nvidia,tegra-audio-max98090";
-		nvidia,model = "GoogleNyanBlaze";
+	host1x@50000000 {
+		dpaux@545c0000 {
+			aux-bus {
+				panel: panel {
+					compatible = "samsung,ltn140at29-301";
+					power-supply = <&vdd_3v3_panel>;
+					backlight = <&backlight>;
+				};
+			};
+		};
 	};
 
 	pinmux@70000868 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinmux_default>;
 
-		pinmux_default: common {
+		pinmux_default: pinmux {
 			clk_32k_out_pa0 {
 				nvidia,pins = "clk_32k_out_pa0";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -1339,4 +1336,11 @@
 			};
 		};
 	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-max98090-nyan-blaze",
+			     "nvidia,tegra-audio-max98090-nyan",
+			     "nvidia,tegra-audio-max98090";
+		nvidia,model = "GoogleNyanBlaze";
+	};
 };
diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/nvidia/tegra124-nyan.dtsi
index 63a81270300a..974c76f007db 100644
--- a/arch/arm/boot/dts/tegra124-nyan.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra124-nyan.dtsi
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
 #include "tegra124.dtsi"
 
 / {
@@ -61,7 +62,7 @@
 		};
 	};
 
-	gpu@0,57000000 {
+	gpu@57000000 {
 		status = "okay";
 
 		vdd-supply = <&vdd_gpu>;
@@ -69,6 +70,8 @@
 
 	serial@70006000 {
 		/* Debug connector on the bottom of the board near SD card. */
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
@@ -87,7 +90,7 @@
 			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
 		};
 
-		temperature-sensor@4c {
+		tmp451: temperature-sensor@4c {
 			compatible = "ti,tmp451";
 			reg = <0x4c>;
 			interrupt-parent = <&gpio>;
@@ -335,6 +338,7 @@
 			interrupt-parent = <&gpio>;
 			interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;
 			reg = <0>;
+			wakeup-source;
 
 			google,cros-ec-spi-msg-delay = <2000>;
 
@@ -390,6 +394,10 @@
 		nvidia,sys-clock-req-active-high;
 	};
 
+	cec@70015000 {
+		status = "okay";
+	};
+
 	hda@70030000 {
 		status = "okay";
 	};
@@ -466,6 +474,7 @@
 				vbus-supply = <&vdd_usb1_vbus>;
 				status = "okay";
 				mode = "otg";
+				usb-role-switch;
 			};
 
 			usb2-1 {
@@ -492,12 +501,6 @@
 		};
 	};
 
-	sdhci0_pwrseq: sdhci0_pwrseq {
-		compatible = "mmc-pwrseq-simple";
-
-		reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
-	};
-
 	mmc@700b0000 { /* WiFi/BT on this bus */
 		status = "okay";
 		bus-width = <4>;
@@ -527,7 +530,7 @@
 
 	/* CPU DFLL clock */
 	clock@70110000 {
-		status = "disabled";
+		status = "okay";
 		vdd-cpu-supply = <&vdd_cpu>;
 		nvidia,i2c-fs-rate = <400000>;
 	};
@@ -582,22 +585,43 @@
 			 256>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
 	};
 
 	cpus {
-		cpu@0 {
+		cpu0: cpu@0 {
+			#cooling-cells = <2>;
 			vdd-cpu-supply = <&vdd_cpu>;
 		};
+
+		cpu1: cpu@1 {
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			#cooling-cells = <2>;
+		};
 	};
 
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		lid {
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <30>;
+			wakeup-source;
+		};
+
+		switch-lid {
 			label = "Lid";
 			gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>;
 			linux,input-type = <5>;
@@ -605,17 +629,21 @@
 			debounce-interval = <1>;
 			wakeup-source;
 		};
+	};
 
-		power {
-			label = "Power";
-			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			debounce-interval = <30>;
-			wakeup-source;
-		};
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		priority = <200>;
 	};
 
-	vdd_mux: regulator@0 {
+	sdhci0_pwrseq: pwrseq-sdhci0 {
+		compatible = "mmc-pwrseq-simple";
+
+		reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
+	};
+
+	vdd_mux: regulator-mux {
 		compatible = "regulator-fixed";
 		regulator-name = "+VDD_MUX";
 		regulator-min-microvolt = <12000000>;
@@ -624,7 +652,7 @@
 		regulator-boot-on;
 	};
 
-	vdd_5v0_sys: regulator@1 {
+	vdd_5v0_sys: regulator-5v0sys {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_SYS";
 		regulator-min-microvolt = <5000000>;
@@ -634,7 +662,7 @@
 		vin-supply = <&vdd_mux>;
 	};
 
-	vdd_3v3_sys: regulator@2 {
+	vdd_3v3_sys: regulator-3v3sys {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_SYS";
 		regulator-min-microvolt = <3300000>;
@@ -644,7 +672,7 @@
 		vin-supply = <&vdd_mux>;
 	};
 
-	vdd_3v3_run: regulator@3 {
+	vdd_3v3_run: regulator-3v3run {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_RUN";
 		regulator-min-microvolt = <3300000>;
@@ -656,7 +684,7 @@
 		vin-supply = <&vdd_3v3_sys>;
 	};
 
-	vdd_3v3_hdmi: regulator@4 {
+	vdd_3v3_hdmi: regulator-3v3hdmi {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
 		regulator-min-microvolt = <3300000>;
@@ -664,7 +692,7 @@
 		vin-supply = <&vdd_3v3_run>;
 	};
 
-	vdd_led: regulator@5 {
+	vdd_led: regulator-led {
 		compatible = "regulator-fixed";
 		regulator-name = "+VDD_LED";
 		gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
@@ -672,7 +700,7 @@
 		vin-supply = <&vdd_mux>;
 	};
 
-	vdd_5v0_ts: regulator@6 {
+	vdd_5v0_ts: regulator-ts {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_VDD_TS_SW";
 		regulator-min-microvolt = <5000000>;
@@ -683,29 +711,31 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_usb1_vbus: regulator@7 {
+	vdd_usb1_vbus: regulator-usb1 {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_USB_HS";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
 		gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		gpio-open-drain;
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_usb3_vbus: regulator@8 {
+	vdd_usb3_vbus: regulator-usb3 {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_USB_SS";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
 		gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		gpio-open-drain;
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_3v3_panel: regulator@9 {
+	vdd_3v3_panel: regulator-panel {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_PANEL";
 		regulator-min-microvolt = <3300000>;
@@ -715,7 +745,7 @@
 		vin-supply = <&vdd_3v3_run>;
 	};
 
-	vdd_3v3_lp0: regulator@10 {
+	vdd_3v3_lp0: regulator-lp0 {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_LP0";
 		regulator-min-microvolt = <3300000>;
@@ -730,7 +760,7 @@
 		vin-supply = <&vdd_3v3_sys>;
 	};
 
-	vdd_hdmi_pll: regulator@11 {
+	vdd_hdmi_pll: regulator-hdmipll {
 		compatible = "regulator-fixed";
 		regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
 		regulator-min-microvolt = <1050000>;
@@ -739,7 +769,7 @@
 		vin-supply = <&vdd_1v05_run>;
 	};
 
-	vdd_5v0_hdmi: regulator@12 {
+	vdd_5v0_hdmi: regulator-hdmicon {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_HDMI_CON";
 		regulator-min-microvolt = <5000000>;
@@ -779,11 +809,33 @@
 				<&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
 	};
 
-	gpio-restart {
-		compatible = "gpio-restart";
-		gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
-		priority = <200>;
+	thermal-zones {
+		cpu-skin-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&tmp451 0>;
+
+			trips {
+				cpu_passive_trip: cpu-alert0 {
+					/* throttle at 70C until temperature drops to 69.8C */
+					temperature = <70000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_passive_trip>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
 	};
 };
 
-#include "cros-ec-keyboard.dtsi"
+#include "../cros-ec-keyboard.dtsi"
diff --git a/arch/arm/boot/dts/tegra124-peripherals-opp.dtsi b/arch/arm/boot/dts/nvidia/tegra124-peripherals-opp.dtsi
index 781ac8601030..b262c1289da5 100644
--- a/arch/arm/boot/dts/tegra124-peripherals-opp.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra124-peripherals-opp.dtsi
@@ -1,421 +1,421 @@
 // SPDX-License-Identifier: GPL-2.0
 
 / {
-	emc_icc_dvfs_opp_table: emc-dvfs-opp-table {
+	emc_icc_dvfs_opp_table: opp-table-emc {
 		compatible = "operating-points-v2";
 
-		opp@12750000,800 {
+		opp-12750000-800 {
 			opp-microvolt = <800000 800000 1150000>;
 			opp-hz = /bits/ 64 <12750000>;
 			opp-supported-hw = <0x0003>;
 		};
 
-		opp@12750000,950 {
+		opp-12750000-950 {
 			opp-microvolt = <950000 950000 1150000>;
 			opp-hz = /bits/ 64 <12750000>;
 			opp-supported-hw = <0x0008>;
 		};
 
-		opp@12750000,1050 {
+		opp-12750000-1050 {
 			opp-microvolt = <1050000 1050000 1150000>;
 			opp-hz = /bits/ 64 <12750000>;
 			opp-supported-hw = <0x0010>;
 		};
 
-		opp@12750000,1110 {
+		opp-12750000-1110 {
 			opp-microvolt = <1110000 1110000 1150000>;
 			opp-hz = /bits/ 64 <12750000>;
 			opp-supported-hw = <0x0004>;
 		};
 
-		opp@20400000,800 {
+		opp-20400000-800 {
 			opp-microvolt = <800000 800000 1150000>;
 			opp-hz = /bits/ 64 <20400000>;
 			opp-supported-hw = <0x0003>;
 		};
 
-		opp@20400000,950 {
+		opp-20400000-950 {
 			opp-microvolt = <950000 950000 1150000>;
 			opp-hz = /bits/ 64 <20400000>;
 			opp-supported-hw = <0x0008>;
 		};
 
-		opp@20400000,1050 {
+		opp-20400000-1050 {
 			opp-microvolt = <1050000 1050000 1150000>;
 			opp-hz = /bits/ 64 <20400000>;
 			opp-supported-hw = <0x0010>;
 		};
 
-		opp@20400000,1110 {
+		opp-20400000-1110 {
 			opp-microvolt = <1110000 1110000 1150000>;
 			opp-hz = /bits/ 64 <20400000>;
 			opp-supported-hw = <0x0004>;
 		};
 
-		opp@40800000,800 {
+		opp-40800000-800 {
 			opp-microvolt = <800000 800000 1150000>;
 			opp-hz = /bits/ 64 <40800000>;
 			opp-supported-hw = <0x0003>;
 		};
 
-		opp@40800000,950 {
+		opp-40800000-950 {
 			opp-microvolt = <950000 950000 1150000>;
 			opp-hz = /bits/ 64 <40800000>;
 			opp-supported-hw = <0x0008>;
 		};
 
-		opp@40800000,1050 {
+		opp-40800000-1050 {
 			opp-microvolt = <1050000 1050000 1150000>;
 			opp-hz = /bits/ 64 <40800000>;
 			opp-supported-hw = <0x0010>;
 		};
 
-		opp@40800000,1110 {
+		opp-40800000-1110 {
 			opp-microvolt = <1110000 1110000 1150000>;
 			opp-hz = /bits/ 64 <40800000>;
 			opp-supported-hw = <0x0004>;
 		};
 
-		opp@68000000,800 {
+		opp-68000000-800 {
 			opp-microvolt = <800000 800000 1150000>;
 			opp-hz = /bits/ 64 <68000000>;
 			opp-supported-hw = <0x0003>;
 		};
 
-		opp@68000000,950 {
+		opp-68000000-950 {
 			opp-microvolt = <950000 950000 1150000>;
 			opp-hz = /bits/ 64 <68000000>;
 			opp-supported-hw = <0x0008>;
 		};
 
-		opp@68000000,1050 {
+		opp-68000000-1050 {
 			opp-microvolt = <1050000 1050000 1150000>;
 			opp-hz = /bits/ 64 <68000000>;
 			opp-supported-hw = <0x0010>;
 		};
 
-		opp@68000000,1110 {
+		opp-68000000-1110 {
 			opp-microvolt = <1110000 1110000 1150000>;
 			opp-hz = /bits/ 64 <68000000>;
 			opp-supported-hw = <0x0004>;
 		};
 
-		opp@102000000,800 {
+		opp-102000000-800 {
 			opp-microvolt = <800000 800000 1150000>;
 			opp-hz = /bits/ 64 <102000000>;
 			opp-supported-hw = <0x0003>;
 		};
 
-		opp@102000000,950 {
+		opp-102000000-950 {
 			opp-microvolt = <950000 950000 1150000>;
 			opp-hz = /bits/ 64 <102000000>;
 			opp-supported-hw = <0x0008>;
 		};
 
-		opp@102000000,1050 {
+		opp-102000000-1050 {
 			opp-microvolt = <1050000 1050000 1150000>;
 			opp-hz = /bits/ 64 <102000000>;
 			opp-supported-hw = <0x0010>;
 		};
 
-		opp@102000000,1110 {
+		opp-102000000-1110 {
 			opp-microvolt = <1110000 1110000 1150000>;
 			opp-hz = /bits/ 64 <102000000>;
 			opp-supported-hw = <0x0004>;
 		};
 
-		opp@204000000,800 {
+		opp-204000000-800 {
 			opp-microvolt = <800000 800000 1150000>;
 			opp-hz = /bits/ 64 <204000000>;
 			opp-supported-hw = <0x0003>;
 			opp-suspend;
 		};
 
-		opp@204000000,950 {
+		opp-204000000-950 {
 			opp-microvolt = <950000 950000 1150000>;
 			opp-hz = /bits/ 64 <204000000>;
 			opp-supported-hw = <0x0008>;
 			opp-suspend;
 		};
 
-		opp@204000000,1050 {
+		opp-204000000-1050 {
 			opp-microvolt = <1050000 1050000 1150000>;
 			opp-hz = /bits/ 64 <204000000>;
 			opp-supported-hw = <0x0010>;
 			opp-suspend;
 		};
 
-		opp@204000000,1110 {
+		opp-204000000-1110 {
 			opp-microvolt = <1110000 1110000 1150000>;
 			opp-hz = /bits/ 64 <204000000>;
 			opp-supported-hw = <0x0004>;
 			opp-suspend;
 		};
 
-		opp@264000000,800 {
+		opp-264000000-800 {
 			opp-microvolt = <800000 800000 1150000>;
 			opp-hz = /bits/ 64 <264000000>;
 			opp-supported-hw = <0x0003>;
 		};
 
-		opp@264000000,950 {
+		opp-264000000-950 {
 			opp-microvolt = <950000 950000 1150000>;
 			opp-hz = /bits/ 64 <264000000>;
 			opp-supported-hw = <0x0008>;
 		};
 
-		opp@264000000,1050 {
+		opp-264000000-1050 {
 			opp-microvolt = <1050000 1050000 1150000>;
 			opp-hz = /bits/ 64 <264000000>;
 			opp-supported-hw = <0x0010>;
 		};
 
-		opp@264000000,1110 {
+		opp-264000000-1110 {
 			opp-microvolt = <1110000 1110000 1150000>;
 			opp-hz = /bits/ 64 <264000000>;
 			opp-supported-hw = <0x0004>;
 		};
 
-		opp@300000000,850 {
+		opp-300000000-850 {
 			opp-microvolt = <850000 850000 1150000>;
 			opp-hz = /bits/ 64 <300000000>;
 			opp-supported-hw = <0x0003>;
 		};
 
-		opp@300000000,950 {
+		opp-300000000-950 {
 			opp-microvolt = <950000 950000 1150000>;
 			opp-hz = /bits/ 64 <300000000>;
 			opp-supported-hw = <0x0008>;
 		};
 
-		opp@300000000,1050 {
+		opp-300000000-1050 {
 			opp-microvolt = <1050000 1050000 1150000>;
 			opp-hz = /bits/ 64 <300000000>;
 			opp-supported-hw = <0x0010>;
 		};
 
-		opp@300000000,1110 {
+		opp-300000000-1110 {
 			opp-microvolt = <1110000 1110000 1150000>;
 			opp-hz = /bits/ 64 <300000000>;
 			opp-supported-hw = <0x0004>;
 		};
 
-		opp@348000000,850 {
+		opp-348000000-850 {
 			opp-microvolt = <850000 850000 1150000>;
 			opp-hz = /bits/ 64 <348000000>;
 			opp-supported-hw = <0x0003>;
 		};
 
-		opp@348000000,950 {
+		opp-348000000-950 {
 			opp-microvolt = <950000 950000 1150000>;
 			opp-hz = /bits/ 64 <348000000>;
 			opp-supported-hw = <0x0008>;
 		};
 
-		opp@348000000,1050 {
+		opp-348000000-1050 {
 			opp-microvolt = <1050000 1050000 1150000>;
 			opp-hz = /bits/ 64 <348000000>;
 			opp-supported-hw = <0x0010>;
 		};
 
-		opp@348000000,1110 {
+		opp-348000000-1110 {
 			opp-microvolt = <1110000 1110000 1150000>;
 			opp-hz = /bits/ 64 <348000000>;
 			opp-supported-hw = <0x0004>;
 		};
 
-		opp@396000000,950 {
+		opp-396000000-950 {
 			opp-microvolt = <950000 950000 1150000>;
 			opp-hz = /bits/ 64 <396000000>;
 			opp-supported-hw = <0x0008>;
 		};
 
-		opp@396000000,1000 {
+		opp-396000000-1000 {
 			opp-microvolt = <1000000 1000000 1150000>;
 			opp-hz = /bits/ 64 <396000000>;
 			opp-supported-hw = <0x0003>;
 		};
 
-		opp@396000000,1050 {
+		opp-396000000-1050 {
 			opp-microvolt = <1050000 1050000 1150000>;
 			opp-hz = /bits/ 64 <396000000>;
 			opp-supported-hw = <0x0010>;
 		};
 
-		opp@396000000,1110 {
+		opp-396000000-1110 {
 			opp-microvolt = <1110000 1110000 1150000>;
 			opp-hz = /bits/ 64 <396000000>;
 			opp-supported-hw = <0x0004>;
 		};
 
-		opp@528000000,950 {
+		opp-528000000-950 {
 			opp-microvolt = <950000 950000 1150000>;
 			opp-hz = /bits/ 64 <528000000>;
 			opp-supported-hw = <0x0008>;
 		};
 
-		opp@528000000,1000 {
+		opp-528000000-1000 {
 			opp-microvolt = <1000000 1000000 1150000>;
 			opp-hz = /bits/ 64 <528000000>;
 			opp-supported-hw = <0x0003>;
 		};
 
-		opp@528000000,1050 {
+		opp-528000000-1050 {
 			opp-microvolt = <1050000 1050000 1150000>;
 			opp-hz = /bits/ 64 <528000000>;
 			opp-supported-hw = <0x0010>;
 		};
 
-		opp@528000000,1110 {
+		opp-528000000-1110 {
 			opp-microvolt = <1110000 1110000 1150000>;
 			opp-hz = /bits/ 64 <528000000>;
 			opp-supported-hw = <0x0004>;
 		};
 
-		opp@600000000,950 {
+		opp-600000000-950 {
 			opp-microvolt = <950000 950000 1150000>;
 			opp-hz = /bits/ 64 <600000000>;
 			opp-supported-hw = <0x0008>;
 		};
 
-		opp@600000000,1000 {
+		opp-600000000-1000 {
 			opp-microvolt = <1000000 1000000 1150000>;
 			opp-hz = /bits/ 64 <600000000>;
 			opp-supported-hw = <0x0003>;
 		};
 
-		opp@600000000,1050 {
+		opp-600000000-1050 {
 			opp-microvolt = <1050000 1050000 1150000>;
 			opp-hz = /bits/ 64 <600000000>;
 			opp-supported-hw = <0x0010>;
 		};
 
-		opp@600000000,1110 {
+		opp-600000000-1110 {
 			opp-microvolt = <1110000 1110000 1150000>;
 			opp-hz = /bits/ 64 <600000000>;
 			opp-supported-hw = <0x0004>;
 		};
 
-		opp@792000000,1000 {
+		opp-792000000-1000 {
 			opp-microvolt = <1000000 1000000 1150000>;
 			opp-hz = /bits/ 64 <792000000>;
 			opp-supported-hw = <0x000B>;
 		};
 
-		opp@792000000,1050 {
+		opp-792000000-1050 {
 			opp-microvolt = <1050000 1050000 1150000>;
 			opp-hz = /bits/ 64 <792000000>;
 			opp-supported-hw = <0x0010>;
 		};
 
-		opp@792000000,1110 {
+		opp-792000000-1110 {
 			opp-microvolt = <1110000 1110000 1150000>;
 			opp-hz = /bits/ 64 <792000000>;
 			opp-supported-hw = <0x0004>;
 		};
 
-		opp@924000000,1100 {
+		opp-924000000-1100 {
 			opp-microvolt = <1100000 1100000 1150000>;
 			opp-hz = /bits/ 64 <924000000>;
 			opp-supported-hw = <0x0013>;
 		};
 
-		opp@1200000000,1100 {
+		opp-1200000000-1100 {
 			opp-microvolt = <1100000 1100000 1150000>;
 			opp-hz = /bits/ 64 <1200000000>;
 			opp-supported-hw = <0x0003>;
 		};
 	};
 
-	emc_bw_dfs_opp_table: emc-bandwidth-opp-table {
+	emc_bw_dfs_opp_table: opp-table-actmon {
 		compatible = "operating-points-v2";
 
-		opp@12750000 {
+		opp-12750000 {
 			opp-hz = /bits/ 64 <12750000>;
 			opp-supported-hw = <0x001F>;
 			opp-peak-kBps = <204000>;
 		};
 
-		opp@20400000 {
+		opp-20400000 {
 			opp-hz = /bits/ 64 <20400000>;
 			opp-supported-hw = <0x001F>;
 			opp-peak-kBps = <326400>;
 		};
 
-		opp@40800000 {
+		opp-40800000 {
 			opp-hz = /bits/ 64 <40800000>;
 			opp-supported-hw = <0x001F>;
 			opp-peak-kBps = <652800>;
 		};
 
-		opp@68000000 {
+		opp-68000000 {
 			opp-hz = /bits/ 64 <68000000>;
 			opp-supported-hw = <0x001F>;
 			opp-peak-kBps = <1088000>;
 		};
 
-		opp@102000000 {
+		opp-102000000 {
 			opp-hz = /bits/ 64 <102000000>;
 			opp-supported-hw = <0x001F>;
 			opp-peak-kBps = <1632000>;
 		};
 
-		opp@204000000 {
+		opp-204000000 {
 			opp-hz = /bits/ 64 <204000000>;
 			opp-supported-hw = <0x001F>;
 			opp-peak-kBps = <3264000>;
 			opp-suspend;
 		};
 
-		opp@264000000 {
+		opp-264000000 {
 			opp-hz = /bits/ 64 <264000000>;
 			opp-supported-hw = <0x001F>;
 			opp-peak-kBps = <4224000>;
 		};
 
-		opp@300000000 {
+		opp-300000000 {
 			opp-hz = /bits/ 64 <300000000>;
 			opp-supported-hw = <0x001F>;
 			opp-peak-kBps = <4800000>;
 		};
 
-		opp@348000000 {
+		opp-348000000 {
 			opp-hz = /bits/ 64 <348000000>;
 			opp-supported-hw = <0x001F>;
 			opp-peak-kBps = <5568000>;
 		};
 
-		opp@396000000 {
+		opp-396000000 {
 			opp-hz = /bits/ 64 <396000000>;
 			opp-supported-hw = <0x001F>;
 			opp-peak-kBps = <6336000>;
 		};
 
-		opp@528000000 {
+		opp-528000000 {
 			opp-hz = /bits/ 64 <528000000>;
 			opp-supported-hw = <0x001F>;
 			opp-peak-kBps = <8448000>;
 		};
 
-		opp@600000000 {
+		opp-600000000 {
 			opp-hz = /bits/ 64 <600000000>;
 			opp-supported-hw = <0x001F>;
 			opp-peak-kBps = <9600000>;
 		};
 
-		opp@792000000 {
+		opp-792000000 {
 			opp-hz = /bits/ 64 <792000000>;
 			opp-supported-hw = <0x001F>;
 			opp-peak-kBps = <12672000>;
 		};
 
-		opp@924000000 {
+		opp-924000000 {
 			opp-hz = /bits/ 64 <924000000>;
 			opp-supported-hw = <0x0013>;
 			opp-peak-kBps = <14784000>;
 		};
 
-		opp@1200000000 {
+		opp-1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
 			opp-supported-hw = <0x0003>;
 			opp-peak-kBps = <19200000>;
diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/nvidia/tegra124-venice2.dts
index e6b54ac1ebd1..df98dc2a67b8 100644
--- a/arch/arm/boot/dts/tegra124-venice2.dts
+++ b/arch/arm/boot/dts/nvidia/tegra124-venice2.dts
@@ -48,10 +48,18 @@
 		dpaux@545c0000 {
 			vdd-supply = <&vdd_3v3_panel>;
 			status = "okay";
+
+			aux-bus {
+				panel: panel {
+					compatible = "lg,lp129qe";
+					power-supply = <&vdd_3v3_panel>;
+					backlight = <&backlight>;
+				};
+			};
 		};
 	};
 
-	gpu@0,57000000 {
+	gpu@57000000 {
 		/*
 		 * Node left disabled on purpose - the bootloader will enable
 		 * it after having set the VPR up
@@ -63,7 +71,7 @@
 		pinctrl-names = "boot";
 		pinctrl-0 = <&pinmux_boot>;
 
-		pinmux_boot: common {
+		pinmux_boot: pinmux {
 			dap_mclk1_pw4 {
 				nvidia,pins = "dap_mclk1_pw4";
 				nvidia,function = "extperiph1";
@@ -601,6 +609,8 @@
 	};
 
 	serial@70006000 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
@@ -847,6 +857,7 @@
 			interrupt-parent = <&gpio>;
 			interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;
 			reg = <0>;
+			wakeup-source;
 
 			google,cros-ec-spi-msg-delay = <2000>;
 
@@ -881,7 +892,8 @@
 	spi@7000da00 {
 		status = "okay";
 		spi-max-frequency = <25000000>;
-		spi-flash@0 {
+
+		flash@0 {
 			compatible = "winbond,w25q32dw", "jedec,spi-nor";
 			reg = <0>;
 			spi-max-frequency = <20000000>;
@@ -972,7 +984,7 @@
 			usb2-0 {
 				status = "okay";
 				mode = "otg";
-
+				usb-role-switch;
 				vbus-supply = <&vdd_usb1_vbus>;
 			};
 
@@ -1061,7 +1073,7 @@
 		default-brightness-level = <6>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
@@ -1070,7 +1082,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			label = "Power";
 			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
@@ -1079,14 +1091,7 @@
 		};
 	};
 
-	panel: panel {
-		compatible = "lg,lp129qe";
-		power-supply = <&vdd_3v3_panel>;
-		backlight = <&backlight>;
-		ddc-i2c-bus = <&dpaux>;
-	};
-
-	vdd_mux: regulator@0 {
+	vdd_mux: regulator-mux {
 		compatible = "regulator-fixed";
 		regulator-name = "+VDD_MUX";
 		regulator-min-microvolt = <12000000>;
@@ -1095,7 +1100,7 @@
 		regulator-boot-on;
 	};
 
-	vdd_5v0_sys: regulator@1 {
+	vdd_5v0_sys: regulator-5v0sys {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_SYS";
 		regulator-min-microvolt = <5000000>;
@@ -1105,7 +1110,7 @@
 		vin-supply = <&vdd_mux>;
 	};
 
-	vdd_3v3_sys: regulator@2 {
+	vdd_3v3_sys: regulator-3v3sys {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_SYS";
 		regulator-min-microvolt = <3300000>;
@@ -1115,7 +1120,7 @@
 		vin-supply = <&vdd_mux>;
 	};
 
-	vdd_3v3_run: regulator@3 {
+	vdd_3v3_run: regulator-3v3run {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_RUN";
 		regulator-min-microvolt = <3300000>;
@@ -1127,7 +1132,7 @@
 		vin-supply = <&vdd_3v3_sys>;
 	};
 
-	vdd_3v3_hdmi: regulator@4 {
+	vdd_3v3_hdmi: regulator-hdmi {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
 		regulator-min-microvolt = <3300000>;
@@ -1135,7 +1140,7 @@
 		vin-supply = <&vdd_3v3_run>;
 	};
 
-	vdd_led: regulator@5 {
+	vdd_led: regulator-led {
 		compatible = "regulator-fixed";
 		regulator-name = "+VDD_LED";
 		regulator-min-microvolt = <3300000>;
@@ -1145,7 +1150,7 @@
 		vin-supply = <&vdd_mux>;
 	};
 
-	vdd_5v0_ts: regulator@6 {
+	vdd_5v0_ts: regulator-ts {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_VDD_TS_SW";
 		regulator-min-microvolt = <5000000>;
@@ -1156,7 +1161,7 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_usb1_vbus: regulator@7 {
+	vdd_usb1_vbus: regulator-usb1 {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_USB_HS";
 		regulator-min-microvolt = <5000000>;
@@ -1167,7 +1172,7 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_usb3_vbus: regulator@8 {
+	vdd_usb3_vbus: regulator-usb3 {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_USB_SS";
 		regulator-min-microvolt = <5000000>;
@@ -1178,7 +1183,7 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_3v3_panel: regulator@9 {
+	vdd_3v3_panel: regulator-panel {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_PANEL";
 		regulator-min-microvolt = <3300000>;
@@ -1188,7 +1193,7 @@
 		vin-supply = <&vdd_3v3_run>;
 	};
 
-	vdd_3v3_lp0: regulator@10 {
+	vdd_3v3_lp0: regulator-lp0 {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_LP0";
 		regulator-min-microvolt = <3300000>;
@@ -1203,7 +1208,7 @@
 		vin-supply = <&vdd_3v3_sys>;
 	};
 
-	vdd_hdmi_pll: regulator@11 {
+	vdd_hdmi_pll: regulator-hdmipll {
 		compatible = "regulator-fixed";
 		regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
 		regulator-min-microvolt = <1050000>;
@@ -1212,7 +1217,7 @@
 		vin-supply = <&vdd_1v05_run>;
 	};
 
-	vdd_5v0_hdmi: regulator@12 {
+	vdd_5v0_hdmi: regulator-hdmicon {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_HDMI_CON";
 		regulator-min-microvolt = <5000000>;
@@ -1251,4 +1256,4 @@
 	};
 };
 
-#include "cros-ec-keyboard.dtsi"
+#include "../cros-ec-keyboard.dtsi"
diff --git a/arch/arm/boot/dts/nvidia/tegra124-xiaomi-mocha.dts b/arch/arm/boot/dts/nvidia/tegra124-xiaomi-mocha.dts
new file mode 100644
index 000000000000..18c9cdf45eca
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra124-xiaomi-mocha.dts
@@ -0,0 +1,2790 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/ti-drv260x.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "tegra124.dtsi"
+
+/ {
+	model = "Xiaomi Mi Pad A0101";
+	compatible = "xiaomi,mocha", "nvidia,tegra124";
+	chassis-type = "tablet";
+
+	aliases {
+		mmc0 = &sdmmc4; /* eMMC */
+		mmc1 = &sdmmc3; /* uSD slot */
+		mmc2 = &sdmmc1; /* WiFi */
+
+		rtc0 = &palmas;
+		rtc1 = "/rtc@7000e000";
+
+		serial0 = &uartd; /* Console */
+		serial1 = &uartc; /* Bluetooth */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		reg = <0 0x80000000 0 0x80000000>;
+	};
+
+	host1x@50000000 {
+		dsia: dsi@54300000 {
+			status = "okay";
+
+			avdd-dsi-csi-supply = <&avdd_dsi_csi>;
+			nvidia,ganged-mode = <&dsib>;
+
+			panel@0 {
+				compatible = "sharp,lq079l1sx01";
+				reg = <0>;
+
+				reset-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+
+				avdd-supply = <&avdd_lcd>;
+				vddio-supply = <&vdd_lcd_io>;
+
+				vsp-supply = <&vsp_5v5_lcd>;
+				vsn-supply = <&vsn_5v5_lcd>;
+
+				backlight = <&lp8556>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						panel_link0: endpoint {
+							remote-endpoint = <&dsia_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						panel_link1: endpoint {
+							remote-endpoint = <&dsib_out>;
+						};
+					};
+				};
+			};
+
+			port {
+				dsia_out: endpoint {
+					remote-endpoint = <&panel_link0>;
+				};
+			};
+		};
+
+		dsib: dsi@54400000 {
+			status = "okay";
+
+			avdd-dsi-csi-supply = <&avdd_dsi_csi>;
+
+			port {
+				dsib_out: endpoint {
+					remote-endpoint = <&panel_link1>;
+				};
+			};
+		};
+	};
+
+	gpu@57000000 {
+		vdd-supply = <&vdd_gpu>;
+	};
+
+	clock@60006000 {
+		emc-timings-0 {
+			nvidia,ram-code = <0>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+				nvidia,parent-clock-frequency = <408000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
+				clock-names = "emc-parent";
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+				nvidia,parent-clock-frequency = <600000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_C>;
+				clock-names = "emc-parent";
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+				nvidia,parent-clock-frequency = <792000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M>;
+				clock-names = "emc-parent";
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+				nvidia,parent-clock-frequency = <528000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
+				clock-names = "emc-parent";
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+				nvidia,parent-clock-frequency = <600000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_C_UD>;
+				clock-names = "emc-parent";
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+				nvidia,parent-clock-frequency = <792000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
+				clock-names = "emc-parent";
+			};
+
+			timing-924000000 {
+				clock-frequency = <924000000>;
+				nvidia,parent-clock-frequency = <924000000>;
+				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
+				clock-names = "emc-parent";
+			};
+		};
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* Keys pinmux */
+			keys {
+				nvidia,pins = "kb_col0_pq0",
+					      "kb_col6_pq6",
+					      "kb_col7_pq7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			hall-front {
+				nvidia,pins = "pi5";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			hall-back {
+				nvidia,pins = "gpio_w3_aud_pw3";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Leds pinmux */
+			bl-en {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			keys-led {
+				nvidia,pins = "ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			rgb-led-en {
+				nvidia,pins = "pg7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Panel pinmux */
+			lcd-rst {
+				nvidia,pins = "ph3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd-vsp-en {
+				nvidia,pins = "pi4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd-vsn-en {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd-id {
+				nvidia,pins = "kb_row6_pr6";
+				nvidia,function = "displaya_alt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			lcd-pwm {
+				nvidia,pins = "ph2";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* SDMMC1 pinmux */
+			sdmmc1-clk {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc1-cmd {
+				nvidia,pins = "sdmmc1_cmd_pz1",
+					      "sdmmc1_dat0_py7",
+					      "sdmmc1_dat1_py6",
+					      "sdmmc1_dat2_py5",
+					      "sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* SDMMC3 pinmux */
+			sdmmc3-clk {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc3-cmd {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+					      "sdmmc3_dat0_pb7",
+					      "sdmmc3_dat1_pb6",
+					      "sdmmc3_dat2_pb5",
+					      "sdmmc3_dat3_pb4",
+					      "sdmmc3_clk_lb_out_pee4",
+					      "sdmmc3_clk_lb_in_pee5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc3-cd {
+				nvidia,pins = "sdmmc3_cd_n_pv2";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			usd-pwr {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* SDMMC4 pinmux */
+			sdmmc4-clk {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc4-cmd {
+				nvidia,pins = "sdmmc4_cmd_pt7",
+					      "sdmmc4_dat0_paa0",
+					      "sdmmc4_dat1_paa1",
+					      "sdmmc4_dat2_paa2",
+					      "sdmmc4_dat3_paa3",
+					      "sdmmc4_dat4_paa4",
+					      "sdmmc4_dat5_paa5",
+					      "sdmmc4_dat6_paa6",
+					      "sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* UART-B pinmux */
+			uartb-cts {
+				nvidia,pins = "uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			uartb-rts {
+				nvidia,pins = "uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			uartb-rxd {
+				nvidia,pins = "uart2_rxd_pc3";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			uartb-txd {
+				nvidia,pins = "uart2_txd_pc2";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* UART-C pinmux */
+			uartc-cts-rxd {
+				nvidia,pins = "uart3_cts_n_pa1",
+					      "uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			uartc-rts-txd {
+				nvidia,pins = "uart3_rts_n_pc0",
+					      "uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* UART-D pinmux */
+			uartd-txd {
+				nvidia,pins = "pj7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			uartd-rxd {
+				nvidia,pins = "pb0";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* I2C pinmux */
+			gen1-i2c {
+				nvidia,pins = "gen1_i2c_sda_pc5",
+					      "gen1_i2c_scl_pc4";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			gen2-i2c {
+				nvidia,pins = "gen2_i2c_scl_pt5",
+					      "gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			cam-i2c {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+					      "cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			ddc-i2c {
+				nvidia,pins = "ddc_scl_pv4",
+					      "ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pwr-i2c {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+					      "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			ts-irq {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ts-rst {
+				nvidia,pins = "pk4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ts-en {
+				nvidia,pins = "pk1";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			hapt-en {
+				nvidia,pins = "pg6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			charger-irq {
+				nvidia,pins = "pj0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			bat-irq {
+				nvidia,pins = "kb_col5_pq5";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			compass-rst {
+				nvidia,pins = "kb_col4_pq4";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			als-irq {
+				nvidia,pins = "gpio_x3_aud_px3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			therm-irq {
+				nvidia,pins = "pi6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			wlan-reg-on {
+				nvidia,pins = "gpio_x7_aud_px7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			wlan-host-wake {
+				nvidia,pins = "pu5";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			bt-reg-on {
+				nvidia,pins = "kb_row1_pr1";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			bt-host-wake {
+				nvidia,pins = "pu6";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			bt-dev-wake {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			imu-irq {
+				nvidia,pins = "kb_row3_pr3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			imu-sync {
+				nvidia,pins = "kb_row8_ps0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			cdc-mclk1 {
+				nvidia,pins = "dap_mclk1_pw4";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			cdc-din {
+				nvidia,pins = "dap1_din_pn1",
+					      "dap1_fs_pn0",
+					      "dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			cdc-dout {
+				nvidia,pins = "dap1_dout_pn2";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spkr-rl-rst {
+				nvidia,pins = "dap2_din_pa4";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spkr-rl-irq {
+				nvidia,pins = "dap2_fs_pa2",
+					      "dap2_sclk_pa3";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dvfs-pwm {
+				nvidia,pins = "dvfs_pwm_px0";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			dvfs-clk {
+				nvidia,pins = "dvfs_clk_px2";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			cam-mclk {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			cam-mclk2 {
+				nvidia,pins = "pbb0";
+				nvidia,function = "vimclk2_alt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vbrtr-pwm {
+				nvidia,pins = "ph0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			soc-pins {
+				nvidia,pins = "pj2", "kb_row15_ps7",
+					      "clk_32k_out_pa0";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk-32k-in {
+				nvidia,pins = "clk_32k_in";
+				nvidia,function = "clk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			core-pwr-req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "pwron";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			cpu-pwr-req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "cpu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pwr-int-n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			reset-out-n {
+				nvidia,pins = "reset_out_n";
+				nvidia,function = "reset_out_n";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd-id-det0 {
+				nvidia,pins = "pi7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			cdc-rst {
+				nvidia,pins = "gpio_x5_aud_px5";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			cdc-det-irq {
+				nvidia,pins = "gpio_w2_aud_pw2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			hph-pa-sd {
+				nvidia,pins = "gpio_x1_aud_px1";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			hph-en {
+				nvidia,pins = "kb_row2_pr2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			cam-rear-rst-n {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			cam-af-pwdn {
+				nvidia,pins = "pbb7";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			cam-front-pwdn {
+				nvidia,pins = "pbb6";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			cam-front-rst-n {
+				nvidia,pins = "pcc1";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gps-en {
+				nvidia,pins = "ph5";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			boot-select {
+				nvidia,pins = "pg0", "pg1", "pg2", "pg3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ram-select {
+				nvidia,pins = "pg4", "pg5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			line-in-det {
+				nvidia,pins = "pk2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gpadc-sync {
+				nvidia,pins = "pi0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gpu-pwr-req {
+				nvidia,pins = "kb_row5_pr5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ear-uart-sw {
+				nvidia,pins = "pu4";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			dsi-b {
+				nvidia,pins = "mipi_pad_ctrl_dsi_b";
+				nvidia,function = "dsi_b";
+			};
+
+			/* GPIO power/drive control */
+			drive-sdio1 {
+				nvidia,pins = "drive_sdio1";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <32>;
+				nvidia,pull-up-strength = <42>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+
+			drive-sdio3 {
+				nvidia,pins = "drive_sdio3";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <20>;
+				nvidia,pull-up-strength = <36>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+
+			drive-gma {
+				nvidia,pins = "drive_gma";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <1>;
+				nvidia,pull-up-strength = <2>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+		};
+	};
+
+	uartc: serial@70006200 {
+		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
+		status = "okay";
+
+		nvidia,adjust-baud-rates = <0 9600 100>,
+					   <9600 115200 200>,
+					   <1000000 4000000 136>;
+
+		bluetooth {
+			compatible = "brcm,bcm43540-bt";
+			max-speed = <4000000>;
+
+			clocks = <&clk32k_pmic>;
+			clock-names = "lpo";
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "host-wakeup";
+
+			device-wakeup-gpios = <&gpio TEGRA_GPIO(EE, 1) GPIO_ACTIVE_HIGH>;
+			shutdown-gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_HIGH>;
+
+			vbat-supply  = <&vdd_3v3_sys>;
+			vddio-supply = <&vdd_1v8_vio>;
+		};
+	};
+
+	uartd: serial@70006300 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
+		status = "okay";
+
+		/* Console */
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	gen1_i2c: i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		lp8556: backlight@2c {
+			compatible = "ti,lp8556";
+			reg = <0x2c>;
+
+			dev-ctrl = /bits/ 8 <0x83>;
+			init-brt = /bits/ 8 <0x1f>;
+
+			power-supply = <&vdd_3v3_sys>;
+			enable-supply = <&vddio_1v8_bl>;
+
+			rom-98h {
+				rom-addr = /bits/ 8 <0x98>;
+				rom-val = /bits/ 8 <0x80>;
+			};
+
+			rom-9eh {
+				rom-addr = /bits/ 8 <0x9e>;
+				rom-val = /bits/ 8 <0x21>;
+			};
+
+			rom-a0h {
+				rom-addr = /bits/ 8 <0xa0>;
+				rom-val = /bits/ 8 <0xff>;
+			};
+
+			rom-a1h {
+				rom-addr = /bits/ 8 <0xa1>;
+				rom-val = /bits/ 8 <0x3f>;
+			};
+
+			rom-a2h {
+				rom-addr = /bits/ 8 <0xa2>;
+				rom-val = /bits/ 8 <0x20>;
+			};
+
+			rom-a3h {
+				rom-addr = /bits/ 8 <0xa3>;
+				rom-val = /bits/ 8 <0x00>;
+			};
+
+			rom-a4h {
+				rom-addr = /bits/ 8 <0xa4>;
+				rom-val = /bits/ 8 <0x72>;
+			};
+
+			rom-a5h {
+				rom-addr = /bits/ 8 <0xa5>;
+				rom-val = /bits/ 8 <0x24>;
+			};
+
+			rom-a6h {
+				rom-addr = /bits/ 8 <0xa6>;
+				rom-val = /bits/ 8 <0x80>;
+			};
+
+			rom-a7h {
+				rom-addr = /bits/ 8 <0xa7>;
+				rom-val = /bits/ 8 <0xf5>;
+			};
+
+			rom-a8h {
+				rom-addr = /bits/ 8 <0xa8>;
+				rom-val = /bits/ 8 <0x24>;
+			};
+
+			rom-a9h {
+				rom-addr = /bits/ 8 <0xa9>;
+				rom-val = /bits/ 8 <0xb2>;
+			};
+
+			rom-aah {
+				rom-addr = /bits/ 8 <0xaa>;
+				rom-val = /bits/ 8 <0x8f>;
+			};
+
+			rom-aeh {
+				rom-addr = /bits/ 8 <0xae>;
+				rom-val = /bits/ 8 <0x0f>;
+			};
+		};
+
+		led-controller@32 {
+			compatible = "national,lp5521";
+			reg = <0x32>;
+
+			enable-gpios = <&gpio TEGRA_GPIO(G, 7) GPIO_ACTIVE_HIGH>;
+			clock-mode = /bits/ 8 <2>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+
+				led-cur = /bits/ 8 <0x14>;
+				max-cur = /bits/ 8 <0xff>;
+
+				color = <LED_COLOR_ID_RED>;
+				function = LED_FUNCTION_STATUS;
+			};
+
+			led@1 {
+				reg = <1>;
+
+				led-cur = /bits/ 8 <0x14>;
+				max-cur = /bits/ 8 <0xff>;
+
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_STATUS;
+			};
+
+			led@2 {
+				reg = <2>;
+
+				led-cur = /bits/ 8 <0x14>;
+				max-cur = /bits/ 8 <0xff>;
+
+				color = <LED_COLOR_ID_BLUE>;
+				function = LED_FUNCTION_STATUS;
+			};
+		};
+
+		audio-codec@34 {
+			compatible = "nxp,tfa9890";
+			reg = <0x34>;
+
+			sound-name-prefix = "Speaker Right";
+			vddd-supply = <&vdd_1v8_vio>;
+
+			#sound-dai-cells = <0>;
+		};
+
+		audio-codec@37 {
+			compatible = "nxp,tfa9890";
+			reg = <0x37>;
+
+			sound-name-prefix = "Speaker Left";
+			vddd-supply = <&vdd_1v8_vio>;
+
+			#sound-dai-cells = <0>;
+		};
+
+		light-sensor@44 {
+			compatible = "isil,isl29035";
+			reg = <0x44>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_LOW>;
+
+			vcc-supply = <&vdd_3v3_sys>;
+		};
+
+		temp_sensor: temperature-sensor@4c {
+			compatible = "ti,tmp451";
+			reg = <0x4c>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_EDGE_FALLING>;
+
+			vcc-supply = <&vdd_1v8_vio>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		haptic-engine@5a {
+			compatible = "ti,drv2604";
+			reg = <0x5a>;
+
+			enable-gpios = <&gpio TEGRA_GPIO(G, 6) GPIO_ACTIVE_HIGH>;
+
+			mode = <DRV260X_ERM_MODE>;
+			library-sel = <DRV260X_ERM_LIB_A>;
+
+			vib-rated-mv = <3200>;
+			vib-overdrive-mv = <3400>;
+
+			vbat-supply = <&vdd_3v3_sys>;
+		};
+	};
+
+	gen2_i2c: i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		power-sensor@40 {
+			compatible = "ti,ina230";
+			reg = <0x40>;
+
+			vs-supply = <&vdd_hv_sdmmc>;
+			#io-channel-cells = <1>;
+		};
+
+		fuel-gauge@55 {
+			compatible = "ti,bq27520g4";
+			reg = <0x55>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(Q, 5) IRQ_TYPE_EDGE_FALLING>;
+
+			monitored-battery = <&battery>;
+			power-supplies = <&bq24192>;
+		};
+
+		bq24192: charger@6b {
+			compatible = "ti,bq24192";
+			reg = <0x6b>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(J, 0) IRQ_TYPE_EDGE_FALLING>;
+
+			ce-gpios = <&palmas_gpio 7 GPIO_ACTIVE_LOW>;
+
+			monitored-battery = <&battery>;
+
+			omit-battery-class;
+			ti,system-minimum-microvolt = <3500000>;
+
+			usb_otg_vbus: usb-otg-vbus {
+				regulator-name = "usb_otg_vbus";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+			};
+		};
+	};
+
+	i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* Atmel mxT1664T/mxT1066T touchscreen */
+		touchscreen@4a {
+			compatible = "atmel,maxtouch";
+			reg = <0x4a>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(R, 7) IRQ_TYPE_EDGE_FALLING>;
+
+			reset-gpios = <&gpio TEGRA_GPIO(K, 4) GPIO_ACTIVE_LOW>;
+
+			linux,keycodes = <KEY_BACK KEY_HOME KEY_MENU>;
+
+			vdda-supply = <&avdd_3v3_ts>;
+			vdd-supply  = <&vdd_2v8_tp>;
+		};
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* Texas Instruments TPS65913 PMIC */
+		palmas: pmic@58 {
+			compatible = "ti,tps65913", "ti,palmas";
+			reg = <0x58>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			ti,system-power-controller;
+
+			adc {
+				compatible = "ti,palmas-gpadc";
+				interrupts = <18 IRQ_TYPE_NONE>,
+					     <16 IRQ_TYPE_NONE>,
+					     <17 IRQ_TYPE_NONE>;
+
+				ti,channel0-current-microamp = <20>;
+				#io-channel-cells = <1>;
+			};
+
+			palmas_extcon: extcon {
+				compatible = "ti,palmas-usb-vid";
+
+				ti,enable-vbus-detection;
+				ti,enable-id-detection;
+
+				ti,wakeup;
+			};
+
+			palmas_gpio: gpio {
+				compatible = "ti,palmas-gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			clk32k_pmic: palmas-clk32k@0 {
+				compatible = "ti,palmas-clk32kg";
+				#clock-cells = <0>;
+			};
+
+			pinmux {
+				compatible = "ti,tps65913-pinctrl";
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&palmas_default>;
+
+				palmas_default: pinmux {
+					pin_gpio0 {
+						pins = "gpio0";
+						function = "id";
+						bias-pull-up;
+					};
+
+					pin_gpio1 {
+						pins = "gpio1";
+						function = "gpio";
+					};
+
+					pin_gpio2 {
+						pins = "gpio2";
+						function = "gpio";
+					};
+
+					/* GPIO3 is not used */
+
+					pin_gpio4 {
+						pins = "gpio4";
+						function = "gpio";
+					};
+
+					pin_gpio5 {
+						pins = "gpio5";
+						function = "clk32kgaudio";
+					};
+
+					/* GPIO6 is not used */
+
+					pin_gpio7 {
+						pins = "gpio7";
+						function = "gpio";
+					};
+
+					pin_powergood {
+						pins = "powergood";
+						function = "powergood";
+					};
+
+					pin_vac {
+						pins = "vac";
+						function = "vac";
+					};
+				};
+			};
+
+			pmic {
+				compatible = "ti,tps65913-pmic", "ti,palmas-pmic";
+
+				ldo1-in-supply = <&vdd_1v8_vio>;
+				ldo2-in-supply = <&vdd_3v3_sys>;
+				ldo3-in-supply = <&vdd_smps10_out2>;
+				ldo4-in-supply = <&vdd_3v3_sys>;
+				ldo5-in-supply = <&vdd_1v8_vio>;
+				ldo6-in-supply = <&vdd_3v3_sys>;
+				ldo7-in-supply = <&vdd_3v3_sys>;
+				ldo8-in-supply = <&vdd_3v3_sys>;
+				ldo9-in-supply = <&vdd_hv_sdmmc>;
+				ldousb-in-supply = <&vdd_smps10_out2>;
+				ldoln-in-supply = <&vdd_smps10_out2>;
+
+				regulators {
+					vdd_cpu: smps123 {
+						regulator-name = "vdd_cpu";
+						regulator-min-microvolt = <700000>;
+						regulator-max-microvolt = <1400000>;
+						regulator-always-on;
+						regulator-boot-on;
+						ti,roof-floor = <1>;
+						ti,mode-sleep = <3>;
+					};
+
+					vdd_gpu: smps45 {
+						regulator-name = "vdd_gpu";
+						regulator-min-microvolt = <700000>;
+						regulator-max-microvolt = <1400000>;
+					};
+
+					vddio_ddr: smps6 {
+						regulator-name = "vddio_ddr";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_core: smps7 {
+						regulator-name = "vdd_core";
+						regulator-min-microvolt = <700000>;
+						regulator-max-microvolt = <1400000>;
+						regulator-always-on;
+						regulator-boot-on;
+						ti,roof-floor = <3>;
+					};
+
+					vdd_1v8_vio: smps8 {
+						regulator-name = "vdd_1v8_gen";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_hv_sdmmc: smps9 {
+						regulator-name = "vdd_hv_sdmmc";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps10_out1 {
+						regulator-name = "vd_smps10_out1";
+						regulator-min-microvolt = <5000000>;
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_smps10_out2: smps10_out2 {
+						regulator-name = "vd_smps10_out2";
+						regulator-min-microvolt = <5000000>;
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					avdd_pll: ldo1 {
+						regulator-name = "avdd_pll";
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <1050000>;
+						regulator-always-on;
+						regulator-boot-on;
+						ti,roof-floor = <3>;
+					};
+
+					avdd_lcd: ldo2 {
+						regulator-name = "avdd_lcd";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-boot-on;
+					};
+
+					avdd_3v3_ts: ldo3 {
+						regulator-name = "avdd_3v3_ts";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-boot-on;
+					};
+
+					avdd_2v7_cam: ldo4 {
+						regulator-name = "avdd_2v7_cam";
+						regulator-min-microvolt = <2700000>;
+						regulator-max-microvolt = <2700000>;
+					};
+
+					avdd_dsi_csi: ldo5 {
+						regulator-name = "avdd_dsi_csi";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+						regulator-boot-on;
+					};
+
+					ldo6 {
+						regulator-name = "vdd_1v8_fuse";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					avdd_2v7_vcm: ldo7 {
+						regulator-name = "avdd_2v7_vcm";
+						regulator-min-microvolt = <2700000>;
+						regulator-max-microvolt = <2700000>;
+					};
+
+					ldo8 {
+						regulator-name = "vdd_rtc";
+						regulator-min-microvolt = <950000>;
+						regulator-max-microvolt = <950000>;
+						regulator-always-on;
+						regulator-boot-on;
+						ti,enable-ldo8-tracking;
+					};
+
+					vddio_usd: ldo9 {
+						regulator-name = "vddio_sdmmc";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					avdd_usb: ldousb {
+						regulator-name = "vdd_usb";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldoln {
+						regulator-name = "vddio_hv";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+				};
+			};
+
+			rtc {
+				compatible = "ti,palmas-rtc";
+				interrupt-parent = <&palmas>;
+				interrupts = <8 IRQ_TYPE_NONE>;
+			};
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <500>;
+		nvidia,cpu-pwr-off-time = <300>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <2000>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
+
+		/* Clear DEV_ON bit in DEV_CTRL register of TPS65913 PMIC */
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <4>;
+			nvidia,bus-addr = <0x58>;
+			nvidia,reg-addr = <0xa0>;
+			nvidia,reg-data = <0x00>;
+		};
+	};
+
+	memory-controller@70019000 {
+		emc-timings-0 {
+			/* Hynix H9CKNNNBKTMTDR DDR3 924MHz */
+			nvidia,ram-code = <0>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emem-configuration = < 0x40040001 0x8000000a
+					0x00000001 0x00000002 0x00000004 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000007
+					0x00000002 0x00000001 0x00000004 0x00000005
+					0x05040102 0x000b0604 0x77230305 0x70000f03
+					0x001f0000 >;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emem-configuration = < 0x40020001 0x80000012
+					0x00000001 0x00000002 0x00000004 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000007
+					0x00000002 0x00000001 0x00000004 0x00000005
+					0x05040102 0x000b0604 0x75a30305 0x70000f03
+					0x001f0000 >;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emem-configuration = < 0xa0000001 0x80000017
+					0x00000001 0x00000002 0x00000004 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000007
+					0x00000002 0x00000001 0x00000004 0x00000005
+					0x05040102 0x000b0604 0x74030305 0x70000f03
+					0x001f0000 >;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0x8000001e
+					0x00000001 0x00000002 0x00000003 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000007
+					0x00000002 0x00000001 0x00000004 0x00000005
+					0x05040102 0x000a0503 0x73830404 0x70000f03
+					0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x08000001 0x80000026
+					0x00000001 0x00000002 0x00000004 0x00000001
+					0x00000003 0x00000001 0x00000002 0x00000007
+					0x00000002 0x00000001 0x00000004 0x00000005
+					0x05040102 0x000a0504 0x73430505 0x70000f03
+					0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x01000003 0x80000040
+					0x00000001 0x00000002 0x00000007 0x00000003
+					0x00000005 0x00000001 0x00000002 0x00000007
+					0x00000003 0x00000001 0x00000005 0x00000005
+					0x05050103 0x000b0607 0x72e40a08 0x70000f03
+					0x001f0000 >;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emem-configuration = < 0x08000004 0x80000040
+					0x00000001 0x00000002 0x00000009 0x00000005
+					0x00000007 0x00000001 0x00000002 0x00000007
+					0x00000003 0x00000001 0x00000005 0x00000005
+					0x05050103 0x000c0709 0x72c50e0a 0x70000f03
+					0x001f0000 >;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emem-configuration = < 0x0f000005 0x80000040
+					0x00000002 0x00000003 0x0000000c 0x00000007
+					0x00000009 0x00000001 0x00000002 0x00000007
+					0x00000003 0x00000001 0x00000005 0x00000005
+					0x05050103 0x000e090c 0x72c6120d 0x70000f03
+					0x001f0000 >;
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+
+				nvidia,emem-configuration = < 0x0f000007 0x80000040
+					0x00000003 0x00000004 0x00000010 0x0000000a
+					0x0000000d 0x00000002 0x00000002 0x00000009
+					0x00000003 0x00000001 0x00000006 0x00000006
+					0x06060103 0x00120b10 0x72c81811 0x70000f03
+					0x001f0000 >;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emem-configuration = < 0x00000009 0x80000040
+					0x00000004 0x00000005 0x00000012 0x0000000b
+					0x0000000e 0x00000002 0x00000003 0x0000000a
+					0x00000003 0x00000001 0x00000006 0x00000007
+					0x07060103 0x00140d12 0x72c91b13 0x70000f03
+					0x001f0000 >;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emem-configuration = < 0x0e00000b 0x80000040
+					0x00000006 0x00000007 0x00000018 0x0000000f
+					0x00000013 0x00000003 0x00000003 0x0000000c
+					0x00000003 0x00000001 0x00000008 0x00000008
+					0x08080103 0x001a1118 0x72ac2419 0x70000f02
+					0x001f0000 >;
+			};
+
+			timing-924000000 {
+				clock-frequency = <924000000>;
+
+				nvidia,emem-configuration = < 0x0e00000d 0x80000040
+					0x00000007 0x00000008 0x0000001b 0x00000012
+					0x00000017 0x00000004 0x00000004 0x0000000e
+					0x00000004 0x00000001 0x00000009 0x00000009
+					0x09090104 0x001e141b 0x72ae2a1c 0x70000f02
+					0x001f0000 >;
+			};
+		};
+	};
+
+	external-memory-controller@7001b000 {
+		emc-timings-0 {
+			/* Hynix H9CKNNNBKTMTDR DDR3 924MHz */
+			nvidia,ram-code = <0>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0xd3200000>;
+				nvidia,emc-cfg-2 = <0x000008c7>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80010083>;
+				nvidia,emc-mode-2 = <0x80020004>;
+				nvidia,emc-mode-4 = <0x800b0000>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-mrs-wait-cnt = <0x000d0011>;
+				nvidia,emc-sel-dpd-ctrl = <0x0004013c>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b018>;
+				nvidia,emc-zcal-cnt-long = <0x00000015>;
+				nvidia,emc-zcal-interval = <0x00064000>;
+
+				nvidia,emc-configuration =  <
+					0x00000000 0x00000002 0x00000000 0x00000002
+					0x00000005 0x00000006 0x00000008 0x00000003
+					0x0000000a 0x00000002 0x00000002 0x00000001
+					0x00000002 0x00000000 0x00000003 0x00000003
+					0x00000006 0x00000002 0x00000000 0x00000005
+					0x00000005 0x00010000 0x00000003 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000004
+					0x0000000c 0x0000000d 0x0000000f 0x00000030
+					0x00000000 0x0000000c 0x00000002 0x00000002
+					0x00000005 0x00000000 0x00000001 0x0000000c
+					0x00000003 0x00000003 0x00000003 0x00000003
+					0x00000003 0x00000006 0x00000006 0x00000003
+					0x00000003 0x00000056 0x00000000 0x00000000
+					0x00000000 0x1363a296 0x005800a0 0x00008000
+					0x00090000 0x00090000 0x00090000 0x00090000
+					0x00090000 0x00090000 0x00090000 0x00090000
+					0x00090000 0x00090000 0x00090000 0x00090000
+					0x00090000 0x00090000 0x00090000 0x00090000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x000fc000 0x000fc000 0x00000000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x0000fc00 0x0000fc00
+					0x0000fc00 0x0000fc00 0x00000200 0x00000000
+					0x00100100 0x00000000 0x00000000 0x77ffc000
+					0x00000404 0x81f1f008 0x07070000 0x0000003f
+					0x015ddddd 0x51451400 0x00514514 0x00514514
+					0x51451400 0x0000003f 0x00000000 0x00000000
+					0x00000011 0x000d0011 0x00000000 0x00000003
+					0x0000f3f3 0x80000164 0x0000000a >;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0xd3200000>;
+				nvidia,emc-cfg-2 = <0x000008c7>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80010083>;
+				nvidia,emc-mode-2 = <0x80020004>;
+				nvidia,emc-mode-4 = <0x800b0000>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-mrs-wait-cnt = <0x00150011>;
+				nvidia,emc-sel-dpd-ctrl = <0x0004013c>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b018>;
+				nvidia,emc-zcal-cnt-long = <0x00000015>;
+				nvidia,emc-zcal-interval = <0x00064000>;
+
+				nvidia,emc-configuration =  <
+					0x00000001 0x00000004 0x00000000 0x00000002
+					0x00000005 0x00000006 0x00000008 0x00000003
+					0x0000000a 0x00000002 0x00000002 0x00000001
+					0x00000002 0x00000000 0x00000003 0x00000003
+					0x00000006 0x00000002 0x00000000 0x00000005
+					0x00000005 0x00010000 0x00000003 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000004
+					0x0000000c 0x0000000d 0x0000000f 0x0000004d
+					0x00000000 0x00000013 0x00000002 0x00000002
+					0x00000005 0x00000000 0x00000001 0x0000000c
+					0x00000005 0x00000005 0x00000003 0x00000003
+					0x00000003 0x00000006 0x00000006 0x00000003
+					0x00000003 0x0000008a 0x00000000 0x00000000
+					0x00000000 0x1363a296 0x005800a0 0x00008000
+					0x00090000 0x00090000 0x00090000 0x00090000
+					0x00090000 0x00090000 0x00090000 0x00090000
+					0x00090000 0x00090000 0x00090000 0x00090000
+					0x00090000 0x00090000 0x00090000 0x00090000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x000fc000 0x000fc000 0x00000000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x0000fc00 0x0000fc00
+					0x0000fc00 0x0000fc00 0x00000200 0x00000000
+					0x00100100 0x00000000 0x00000000 0x77ffc000
+					0x00000404 0x81f1f008 0x07070000 0x0000003f
+					0x015ddddd 0x51451400 0x00514514 0x00514514
+					0x51451400 0x0000003f 0x00000000 0x00000000
+					0x00000011 0x00150011 0x00000000 0x00000003
+					0x0000f3f3 0x8000019f 0x0000000a >;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0xd3200000>;
+				nvidia,emc-cfg-2 = <0x000008c7>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80010083>;
+				nvidia,emc-mode-2 = <0x80020004>;
+				nvidia,emc-mode-4 = <0x800b0000>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-mrs-wait-cnt = <0x00290011>;
+				nvidia,emc-sel-dpd-ctrl = <0x0004013c>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b018>;
+				nvidia,emc-zcal-cnt-long = <0x00000015>;
+				nvidia,emc-zcal-interval = <0x00064000>;
+
+				nvidia,emc-configuration =  <
+					0x00000002 0x00000008 0x00000000 0x00000002
+					0x00000005 0x00000006 0x00000008 0x00000003
+					0x0000000a 0x00000002 0x00000002 0x00000001
+					0x00000002 0x00000000 0x00000003 0x00000003
+					0x00000006 0x00000002 0x00000000 0x00000005
+					0x00000005 0x00010000 0x00000003 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000004
+					0x0000000c 0x0000000d 0x0000000f 0x0000009a
+					0x00000000 0x00000026 0x00000002 0x00000002
+					0x00000005 0x00000000 0x00000001 0x0000000c
+					0x00000009 0x00000009 0x00000003 0x00000003
+					0x00000003 0x00000006 0x00000007 0x00000003
+					0x00000003 0x00000113 0x00000000 0x00000000
+					0x00000000 0x1363a296 0x005800a0 0x00008000
+					0x00090000 0x00090000 0x00090000 0x00090000
+					0x00090000 0x00090000 0x00090000 0x00090000
+					0x00090000 0x00090000 0x00090000 0x00090000
+					0x00090000 0x00090000 0x00090000 0x00090000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x000fc000 0x000fc000 0x00000000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x0000fc00 0x0000fc00
+					0x0000fc00 0x0000fc00 0x00000200 0x00000000
+					0x00100100 0x00000000 0x00000000 0x77ffc000
+					0x00000404 0x81f1f008 0x07070000 0x0000003f
+					0x015ddddd 0x51451400 0x00514514 0x00514514
+					0x51451400 0x0000003f 0x00000000 0x00000000
+					0x00000011 0x00290011 0x00000000 0x00000003
+					0x0000f3f3 0x8000023a 0x0000000a >;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0xd3200000>;
+				nvidia,emc-cfg-2 = <0x000008c7>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80010083>;
+				nvidia,emc-mode-2 = <0x80020004>;
+				nvidia,emc-mode-4 = <0x800b0000>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-mrs-wait-cnt = <0x00440011>;
+				nvidia,emc-sel-dpd-ctrl = <0x0004013c>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b018>;
+				nvidia,emc-zcal-cnt-long = <0x00000015>;
+				nvidia,emc-zcal-interval = <0x00064000>;
+
+				nvidia,emc-configuration =  <
+					0x00000004 0x00000010 0x00000000 0x00000002
+					0x00000004 0x00000006 0x00000008 0x00000003
+					0x0000000a 0x00000002 0x00000002 0x00000001
+					0x00000002 0x00000000 0x00000003 0x00000003
+					0x00000006 0x00000002 0x00000000 0x00000005
+					0x00000005 0x00010000 0x00000003 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000004
+					0x0000000c 0x0000000d 0x0000000f 0x00000101
+					0x00000000 0x00000040 0x00000002 0x00000002
+					0x00000004 0x00000000 0x00000001 0x0000000c
+					0x0000000f 0x0000000f 0x00000003 0x00000003
+					0x00000003 0x00000006 0x00000005 0x00000003
+					0x00000003 0x000001c9 0x00000000 0x00000000
+					0x00000000 0x1363a296 0x005800a0 0x00008000
+					0x00090000 0x00090000 0x00090000 0x00090000
+					0x00090000 0x00090000 0x00090000 0x00090000
+					0x00090000 0x00090000 0x00090000 0x00090000
+					0x00090000 0x00090000 0x00090000 0x00090000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x000fc000 0x000fc000 0x00000000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x0000fc00 0x0000fc00
+					0x0000fc00 0x0000fc00 0x00000200 0x00000000
+					0x00100100 0x00000000 0x00000000 0x77ffc000
+					0x00000404 0x81f1f008 0x07070000 0x0000003f
+					0x015ddddd 0x51451400 0x00514514 0x00514514
+					0x51451400 0x0000003f 0x00000000 0x00000000
+					0x00000019 0x00440011 0x00000000 0x00000003
+					0x0000f3f3 0x80000309 0x0000000a >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0xd3200000>;
+				nvidia,emc-cfg-2 = <0x000008c7>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80010083>;
+				nvidia,emc-mode-2 = <0x80020004>;
+				nvidia,emc-mode-4 = <0x800b0000>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-mrs-wait-cnt = <0x00660011>;
+				nvidia,emc-sel-dpd-ctrl = <0x0004013c>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b018>;
+				nvidia,emc-zcal-cnt-long = <0x00000015>;
+				nvidia,emc-zcal-interval = <0x00064000>;
+
+				nvidia,emc-configuration =  <
+					0x00000006 0x00000015 0x00000000 0x00000004
+					0x00000004 0x00000006 0x00000008 0x00000003
+					0x0000000a 0x00000002 0x00000002 0x00000001
+					0x00000002 0x00000000 0x00000003 0x00000003
+					0x00000006 0x00000002 0x00000000 0x00000005
+					0x00000005 0x00010000 0x00000003 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000004
+					0x0000000c 0x0000000d 0x0000000f 0x00000182
+					0x00000000 0x00000060 0x00000002 0x00000002
+					0x00000004 0x00000000 0x00000001 0x0000000c
+					0x00000017 0x00000017 0x00000003 0x00000003
+					0x00000003 0x00000006 0x00000005 0x00000003
+					0x00000003 0x000002ae 0x00000000 0x00000000
+					0x00000000 0x1363a296 0x005800a0 0x00008000
+					0x00090000 0x00090000 0x00090000 0x00090000
+					0x00090000 0x00090000 0x00090000 0x00090000
+					0x00090000 0x00090000 0x00090000 0x00090000
+					0x00090000 0x00090000 0x00090000 0x00090000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x000fc000 0x000fc000 0x00000000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x0000fc00 0x0000fc00
+					0x0000fc00 0x0000fc00 0x00000200 0x00000000
+					0x00100100 0x00000000 0x00000000 0x77ffc000
+					0x00000404 0x81f1f008 0x07070000 0x0000003f
+					0x015ddddd 0x51451400 0x00514514 0x00514514
+					0x51451400 0x0000003f 0x00000000 0x00000000
+					0x00000025 0x00660011 0x00000000 0x00000003
+					0x0000f3f3 0x8000040b 0x0000000a >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-cfg = <0xd3200000>;
+				nvidia,emc-cfg-2 = <0x000008cf>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80010083>;
+				nvidia,emc-mode-2 = <0x80020004>;
+				nvidia,emc-mode-4 = <0x800b0000>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-mrs-wait-cnt = <0x00cc0011>;
+				nvidia,emc-sel-dpd-ctrl = <0x0004013c>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0130b018>;
+				nvidia,emc-zcal-cnt-long = <0x00000017>;
+				nvidia,emc-zcal-interval = <0x00064000>;
+
+				nvidia,emc-configuration =  <
+					0x0000000c 0x0000002a 0x00000000 0x00000008
+					0x00000005 0x00000007 0x00000008 0x00000003
+					0x0000000a 0x00000003 0x00000003 0x00000002
+					0x00000003 0x00000000 0x00000002 0x00000002
+					0x00000005 0x00000003 0x00000000 0x00000003
+					0x00000007 0x00010000 0x00000004 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000002
+					0x0000000e 0x0000000f 0x00000011 0x00000304
+					0x00000000 0x000000c1 0x00000002 0x00000002
+					0x00000005 0x00000000 0x00000001 0x0000000c
+					0x0000002d 0x0000002d 0x00000003 0x00000004
+					0x00000003 0x00000009 0x00000006 0x00000003
+					0x00000003 0x0000055b 0x00000000 0x00000000
+					0x00000000 0x1363a296 0x005800a0 0x00008000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00098000 0x00098000 0x00000000 0x00098000
+					0x00098000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x0008c000 0x00088000
+					0x00088000 0x00088000 0x00008800 0x00008800
+					0x00008800 0x00008800 0x00000200 0x00000000
+					0x00100100 0x00000000 0x00000000 0x77ffc000
+					0x00000404 0x81f1f008 0x07070000 0x0000003f
+					0x015ddddd 0x51451400 0x00514514 0x00514514
+					0x51451400 0x0000003f 0x00000000 0x00000000
+					0x0000004a 0x00cc0011 0x00000000 0x00000004
+					0x0000d3b3 0x80000713 0x0000000a >;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0xd3300000>;
+				nvidia,emc-cfg-2 = <0x000008d7>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80010083>;
+				nvidia,emc-mode-2 = <0x80020004>;
+				nvidia,emc-mode-4 = <0x800b0000>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-mrs-wait-cnt = <0x012c0011>;
+				nvidia,emc-sel-dpd-ctrl = <0x0004013c>;
+				nvidia,emc-xm2dqspadctrl2 = <0x01231239>;
+				nvidia,emc-zcal-cnt-long = <0x0000001f>;
+				nvidia,emc-zcal-interval = <0x00064000>;
+
+				nvidia,emc-configuration =  <
+					0x00000011 0x0000003e 0x00000000 0x0000000c
+					0x00000005 0x00000007 0x00000008 0x00000003
+					0x0000000a 0x00000005 0x00000005 0x00000002
+					0x00000003 0x00000000 0x00000002 0x00000002
+					0x00000006 0x00000003 0x00000000 0x00000003
+					0x00000008 0x00030000 0x00000004 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000002
+					0x0000000f 0x00000012 0x00000014 0x0000046e
+					0x00000000 0x0000011b 0x00000002 0x00000002
+					0x00000005 0x00000000 0x00000001 0x0000000c
+					0x00000042 0x00000042 0x00000003 0x00000005
+					0x00000003 0x0000000d 0x00000007 0x00000003
+					0x00000003 0x000007e0 0x00000000 0x00000000
+					0x00000000 0x1363a096 0x005800a0 0x00008000
+					0x00020000 0x00020000 0x00020000 0x00020000
+					0x00020000 0x00020000 0x00020000 0x00020000
+					0x00020000 0x00020000 0x00020000 0x00020000
+					0x00020000 0x00020000 0x00020000 0x00020000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00060000 0x00060000 0x00000000 0x00060000
+					0x00060000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00048000 0x00048000
+					0x00048000 0x00048000 0x00004800 0x00004800
+					0x00004800 0x00004800 0x00000200 0x00000000
+					0x00100100 0x00000000 0x00000000 0x77ffc000
+					0x00000404 0x81f1f008 0x07070000 0x0000003f
+					0x015ddddd 0x51451420 0x00514514 0x00514514
+					0x51451400 0x0000003f 0x00000000 0x00000000
+					0x0000006c 0x012c0011 0x00000000 0x00000004
+					0x000052a3 0x800009ed 0x0000000b >;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0xd3300000>;
+				nvidia,emc-cfg-2 = <0x00000897>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80010083>;
+				nvidia,emc-mode-2 = <0x80020004>;
+				nvidia,emc-mode-4 = <0x800b0000>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-mrs-wait-cnt = <0x018c0011>;
+				nvidia,emc-sel-dpd-ctrl = <0x0004001c>;
+				nvidia,emc-xm2dqspadctrl2 = <0x01231239>;
+				nvidia,emc-zcal-cnt-long = <0x00000028>;
+				nvidia,emc-zcal-interval = <0x00064000>;
+
+				nvidia,emc-configuration =  <
+					0x00000017 0x00000053 0x00000000 0x00000010
+					0x00000007 0x00000008 0x00000008 0x00000003
+					0x0000000a 0x00000007 0x00000007 0x00000003
+					0x00000003 0x00000000 0x00000002 0x00000002
+					0x00000006 0x00000003 0x00000000 0x00000002
+					0x00000009 0x00030000 0x00000004 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000001
+					0x00000010 0x00000012 0x00000014 0x000005d9
+					0x00000000 0x00000176 0x00000002 0x00000002
+					0x00000007 0x00000000 0x00000001 0x0000000e
+					0x00000058 0x00000058 0x00000003 0x00000006
+					0x00000003 0x00000012 0x00000009 0x00000003
+					0x00000003 0x00000a66 0x00000000 0x00000000
+					0x00000000 0x1363a096 0x005800a0 0x00008000
+					0x00020000 0x00020000 0x00020000 0x00020000
+					0x00020000 0x00020000 0x00020000 0x00020000
+					0x00020000 0x00020000 0x00020000 0x00020000
+					0x00020000 0x00020000 0x00020000 0x00020000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00048000 0x00048000 0x00000000 0x00048000
+					0x00048000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00038000 0x00038000
+					0x00038000 0x00038000 0x00003800 0x00003800
+					0x00003800 0x00003800 0x00000200 0x00000000
+					0x00100100 0x00000000 0x00000000 0x77ffc000
+					0x00000404 0x81f1f008 0x07070000 0x0000003f
+					0x015ddddd 0x51451420 0x00514514 0x00514514
+					0x51451400 0x0000003f 0x00000000 0x00000000
+					0x0000008f 0x018c0011 0x00000000 0x00000004
+					0x000052a3 0x80000cc7 0x0000000b >;
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0xd3300000>;
+				nvidia,emc-cfg-2 = <0x0000089f>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x800100c3>;
+				nvidia,emc-mode-2 = <0x80020006>;
+				nvidia,emc-mode-4 = <0x800b0000>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-mrs-wait-cnt = <0x02100013>;
+				nvidia,emc-sel-dpd-ctrl = <0x0004001c>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0123123d>;
+				nvidia,emc-zcal-cnt-long = <0x00000034>;
+				nvidia,emc-zcal-interval = <0x00064000>;
+
+				nvidia,emc-configuration =  <
+					0x0000001f 0x0000006e 0x00000000 0x00000016
+					0x00000009 0x00000009 0x00000009 0x00000003
+					0x0000000d 0x00000009 0x00000009 0x00000005
+					0x00000004 0x00000000 0x00000002 0x00000002
+					0x00000008 0x00000003 0x00000000 0x00000003
+					0x0000000a 0x00050000 0x00000004 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000002
+					0x00000011 0x00000015 0x00000017 0x000007cd
+					0x00000000 0x000001f3 0x00000003 0x00000003
+					0x00000009 0x00000000 0x00000001 0x00000011
+					0x00000075 0x00000075 0x00000004 0x00000008
+					0x00000004 0x00000019 0x0000000c 0x00000003
+					0x00000003 0x00000ddd 0x00000000 0x00000000
+					0x00000000 0x1363a096 0xe01200b9 0x00008000
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00004010 0x00004010 0x00000000 0x00004010
+					0x00004010 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x0000000c 0x0000000c
+					0x0000000c 0x0000000c 0x0000000c 0x0000000c
+					0x0000000c 0x0000000c 0x00000220 0x00000000
+					0x00100100 0x00000000 0x00000000 0x77ffc004
+					0x00000404 0x81f1f008 0x07070000 0x0000003f
+					0x015ddddd 0x51451420 0x00514514 0x00514514
+					0x51451400 0x0000003f 0x00000000 0x00000000
+					0x000000bf 0x02100013 0x00000000 0x00000004
+					0x000042a0 0x800010b3 0x0000000d >;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0xd3300000>;
+				nvidia,emc-cfg-2 = <0x0000089f>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x800100e3>;
+				nvidia,emc-mode-2 = <0x80020007>;
+				nvidia,emc-mode-4 = <0x800b0000>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-mrs-wait-cnt = <0x02580014>;
+				nvidia,emc-sel-dpd-ctrl = <0x0004001c>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0121103d>;
+				nvidia,emc-zcal-cnt-long = <0x0000003a>;
+				nvidia,emc-zcal-interval = <0x00064000>;
+
+				nvidia,emc-configuration =  <
+					0x00000023 0x0000007d 0x00000000 0x00000019
+					0x0000000a 0x0000000a 0x0000000b 0x00000004
+					0x0000000f 0x0000000a 0x0000000a 0x00000005
+					0x00000004 0x00000000 0x00000004 0x00000004
+					0x0000000a 0x00000004 0x00000000 0x00000003
+					0x0000000d 0x00070000 0x00000005 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000002
+					0x00000014 0x00000018 0x0000001a 0x000008e4
+					0x00000000 0x00000239 0x00000004 0x00000004
+					0x0000000a 0x00000000 0x00000001 0x00000013
+					0x00000084 0x00000084 0x00000005 0x00000009
+					0x00000005 0x0000001c 0x0000000d 0x00000003
+					0x00000003 0x00000fc0 0x00000000 0x00000000
+					0x00000000 0x1363a096 0xe00e00b9 0x00008000
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000010 0x00000010 0x00000000 0x00000010
+					0x00000010 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000001
+					0x00000000 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000000 0x00000000 0x00000001
+					0x00000000 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000000 0x0000000c 0x0000000b
+					0x0000000b 0x0000000b 0x0000000b 0x0000000b
+					0x0000000b 0x0000000b 0x00000220 0x00000000
+					0x00100100 0x00000000 0x00000000 0x77ffc004
+					0x00000404 0x81f1f008 0x07070000 0x0000003f
+					0x015ddddd 0x51451420 0x00514514 0x00514514
+					0x51451400 0x0000003f 0x00000000 0x00000000
+					0x000000d8 0x02580014 0x00000000 0x00000005
+					0x000040a0 0x800012d6 0x00000010 >;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0xd3300000>;
+				nvidia,emc-cfg-2 = <0x0000089f>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80010043>;
+				nvidia,emc-mode-2 = <0x8002001a>;
+				nvidia,emc-mode-4 = <0x800b0000>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-mrs-wait-cnt = <0x03180017>;
+				nvidia,emc-sel-dpd-ctrl = <0x0004001c>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0120103d>;
+				nvidia,emc-zcal-cnt-long = <0x0000004c>;
+				nvidia,emc-zcal-interval = <0x00064000>;
+
+				nvidia,emc-configuration =  <
+					0x0000002f 0x000000a6 0x00000000 0x00000021
+					0x0000000e 0x0000000d 0x0000000d 0x00000005
+					0x00000013 0x0000000e 0x0000000e 0x00000007
+					0x00000004 0x00000000 0x00000005 0x00000005
+					0x0000000e 0x00000004 0x00000000 0x00000005
+					0x0000000f 0x000b0000 0x00000006 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000004
+					0x00000016 0x0000001d 0x0000001f 0x00000bd1
+					0x00000000 0x000002f4 0x00000005 0x00000005
+					0x0000000e 0x00000000 0x00000001 0x00000017
+					0x000000af 0x000000af 0x00000006 0x0000000c
+					0x00000006 0x00000026 0x00000011 0x00000003
+					0x00000003 0x000014cb 0x00000000 0x00000000
+					0x00000000 0x1363a096 0xe00700b9 0x00008000
+					0x00000006 0x00000006 0x00000006 0x00000006
+					0x00000006 0x00000006 0x00000006 0x00000006
+					0x00000006 0x00000006 0x00000006 0x00000006
+					0x00000006 0x00000006 0x00000006 0x00000006
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00008012 0x00008012 0x00000000 0x00008012
+					0x00008012 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000002 0x00000005
+					0x00000002 0x00000004 0x00000005 0x00000004
+					0x00000004 0x00000003 0x00000002 0x00000005
+					0x00000002 0x00000004 0x00000005 0x00000004
+					0x00000004 0x00000003 0x0000000b 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x00000220 0x00000000
+					0x00100100 0x00000000 0x00000000 0x77ffc004
+					0x00000808 0x81f1f008 0x07070000 0x00000000
+					0x015ddddd 0x61861820 0x00514514 0x00514514
+					0x61861800 0x0000003f 0x00000000 0x00000000
+					0x0000011e 0x03180017 0x00000000 0x00000006
+					0x00004080 0x8000188b 0x00000014 >;
+			};
+
+			timing-924000000 {
+				clock-frequency = <924000000>;
+
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-bgbias-ctl0 = <0x00000000>;
+				nvidia,emc-cfg = <0xd3300000>;
+				nvidia,emc-cfg-2 = <0x0000089f>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-mode-1 = <0x80010083>;
+				nvidia,emc-mode-2 = <0x8002001c>;
+				nvidia,emc-mode-4 = <0x800b0000>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-mrs-wait-cnt = <0x039c0019>;
+				nvidia,emc-sel-dpd-ctrl = <0x0004001c>;
+				nvidia,emc-xm2dqspadctrl2 = <0x0120103d>;
+				nvidia,emc-zcal-cnt-long = <0x00000058>;
+				nvidia,emc-zcal-interval = <0x00064000>;
+
+				nvidia,emc-configuration =  <
+					0x00000037 0x000000c2 0x00000000 0x00000026
+					0x00000010 0x0000000f 0x00000010 0x00000006
+					0x00000017 0x00000010 0x00000010 0x00000009
+					0x00000005 0x00000000 0x00000007 0x00000007
+					0x00000010 0x00000005 0x00000000 0x00000005
+					0x00000012 0x000d0000 0x00000007 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000004
+					0x00000019 0x00000020 0x00000022 0x00000dd4
+					0x00000000 0x00000375 0x00000006 0x00000006
+					0x00000010 0x00000000 0x00000001 0x0000001b
+					0x000000cc 0x000000cc 0x00000007 0x0000000e
+					0x00000007 0x0000002d 0x00000014 0x00000003
+					0x00000003 0x00001842 0x00000000 0x00000000
+					0x00000000 0x1363a896 0xe00400b9 0x00008000
+					0x00000004 0x00000004 0x00000004 0x00000004
+					0x00000004 0x00000004 0x00000004 0x00000004
+					0x00000004 0x00000004 0x00000004 0x00000004
+					0x00000004 0x00000004 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x0000000f 0x0000000f 0x00000000 0x00000011
+					0x00000012 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000004 0x00000006
+					0x00000004 0x00000006 0x00000006 0x00000006
+					0x00000006 0x00000005 0x00000004 0x00000006
+					0x00000004 0x00000006 0x00000006 0x00000006
+					0x00000006 0x00000005 0x0000000a 0x00000009
+					0x00000009 0x0000000a 0x00000009 0x00000009
+					0x00000009 0x00000009 0x00000220 0x00000000
+					0x00100100 0x00000000 0x00000000 0x77ffc004
+					0x00000404 0x81f1f008 0x07070000 0x00000000
+					0x015ddddd 0x51451420 0x00514514 0x00514514
+					0x51451400 0x0000003f 0x00000000 0x00000000
+					0x0000014d 0x039c0019 0x00000000 0x00000007
+					0x00004080 0x80001c77 0x00000017 >;
+			};
+		};
+	};
+
+	padctl@7009f000 {
+		status = "disabled";
+	};
+
+	/* WiFi */
+	sdmmc1: mmc@700b0000 {
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		assigned-clocks = <&tegra_car TEGRA124_CLK_SDMMC1>;
+		assigned-clock-parents = <&tegra_car TEGRA124_CLK_PLL_P>;
+		assigned-clock-rates = <204000000>;
+
+		max-frequency = <82000000>;
+		keep-power-in-suspend;
+		bus-width = <4>;
+		non-removable;
+
+		sd-uhs-sdr104;
+		mmc-ddr-1_8v;
+
+		mmc-pwrseq = <&brcm_wifi_pwrseq>;
+		vmmc-supply = <&vdd_3v3_sys>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+
+		/* BCM4354XKUBG */
+		wifi@1 {
+			compatible = "brcm,bcm4354-fmac", "brcm,bcm4329-fmac";
+			reg = <1>;
+
+			clocks = <&clk32k_pmic>;
+			clock-names = "lpo";
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(U, 5) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host-wake";
+		};
+	};
+
+	/* MicroSD */
+	sdmmc3: mmc@700b0400 {
+		status = "okay";
+		bus-width = <4>;
+
+		sd-uhs-sdr104;
+		mmc-ddr-1_8v;
+
+		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
+
+		vmmc-supply = <&vdd_hv_sdmmc>;
+		vqmmc-supply = <&vddio_usd>;
+	};
+
+	/* eMMC */
+	sdmmc4: mmc@700b0600 {
+		status = "okay";
+		bus-width = <8>;
+
+		mmc-hs200-1_8v;
+		non-removable;
+
+		vmmc-supply = <&vdd_hv_sdmmc>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+	};
+
+	/* CPU DFLL clock */
+	clock@70110000 {
+		status = "okay";
+		vdd-cpu-supply = <&vdd_cpu>;
+		nvidia,i2c-fs-rate = <400000>;
+	};
+
+	ahub@70300000 {
+		/* HIFI CODEC */
+		i2s@70301000 {		/* i2s0 */
+			status = "okay";
+		};
+
+		/* LEFT SPK */
+		i2s@70301100 {		/* i2s1 */
+			status = "okay";
+		};
+
+		/* RIGHT SPK */
+		i2s@70301200 {		/* i2s2 */
+			status = "okay";
+		};
+
+		/* BT SCO */
+		i2s@70301300 {		/* i2s3 */
+			status = "okay";
+		};
+	};
+
+	usb1: usb@7d000000 {
+		compatible = "nvidia,tegra124-udc";
+		status = "okay";
+		dr_mode = "otg";
+
+		hnp-disable;
+		srp-disable;
+		adp-disable;
+
+		usb-role-switch;
+		extcon = <&bq24192>, <&palmas_extcon>; /* vbus, id */
+		vbus-supply = <&usb_otg_vbus>;
+
+		port {
+			usb_in: endpoint {
+				remote-endpoint = <&connector_out>;
+			};
+		};
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		dr_mode = "otg";
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		vbus-supply = <&avdd_usb>;
+	};
+
+	battery: battery-cell {
+		compatible = "simple-battery";
+		device-chemistry = "lithium-ion-polymer";
+
+		charge-full-design-microamp-hours = <6520000>;
+		energy-full-design-microwatt-hours = <2478000>;
+
+		voltage-min-design-microvolt = <4300000>;
+		voltage-max-design-microvolt = <4350000>;
+
+		precharge-current-microamp = <256000>;
+		charge-term-current-microamp = <400000>;
+
+		operating-range-celsius = <0 45>;
+	};
+
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "ref-oscillator";
+	};
+
+	connector {
+		compatible = "usb-b-connector";
+		type = "micro";
+
+		port {
+			connector_out: endpoint {
+				remote-endpoint = <&usb_in>;
+			};
+		};
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			vdd-cpu-supply = <&vdd_cpu>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			#cooling-cells = <2>;
+		};
+	};
+
+	extcon-keys {
+		compatible = "gpio-keys";
+
+		switch-back-hall-sensor {
+			label = "Hall sensor (back)";
+			gpios = <&gpio TEGRA_GPIO(W, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+			wakeup-source;
+		};
+
+		switch-front-hall-sensor {
+			label = "Hall sensor (front)";
+			gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(Q, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(Q, 6) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+		};
+	};
+
+	led-controller {
+		compatible = "pwm-leds";
+
+		led-button {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_BACKLIGHT;
+
+			pwms = <&pwm 1 10000>;
+			max-brightness = <100>;
+		};
+	};
+
+	brcm_wifi_pwrseq: pwrseq-wifi {
+		compatible = "mmc-pwrseq-simple";
+
+		reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
+
+		post-power-on-delay-ms = <300>;
+		power-off-delay-us = <300>;
+	};
+
+	vdd_3v3_sys: regulator-3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vddio_1v8_bl: regulator-bl-io {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio_1v8_bl";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(BB, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_1v8_vio>;
+	};
+
+	vdd_lcd_io: regulator-lcd-vio {
+		compatible = "regulator-fixed";
+		regulator-name = "dvdd_lcd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		gpio = <&palmas_gpio 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_1v8_vio>;
+	};
+
+	vsp_5v5_lcd: regulator-vsp {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd_lcd_vsp";
+		regulator-min-microvolt = <5500000>;
+		regulator-max-microvolt = <5500000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(I, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vsn_5v5_lcd: regulator-vsn {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd_lcd_vsn";
+		regulator-min-microvolt = <5500000>;
+		regulator-max-microvolt = <5500000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_2v8_tp: regulator-vtp {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_2v8_tp";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_smps10_out2>;
+	};
+
+	iovdd_1v8_cam: regulator-iovdd-cam {
+		compatible = "regulator-fixed";
+		regulator-name = "iovdd_1v8_cam";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&palmas_gpio 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_1v8_vio>;
+	};
+
+	dvdd_1v2_cam: regulator-dvdd-cam {
+		compatible = "regulator-fixed";
+		regulator-name = "dvdd_1v2_cam";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		gpio = <&palmas_gpio 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_1v8_vio>;
+	};
+
+	vdd_3v3_hph: regulator-hph {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_hph";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	thermal-zones {
+		/*
+		 * TMP451 has two sensors:
+		 *
+		 *	0: internal that monitors ambient/skin temperature
+		 *	1: external that is connected to the CPU's diode
+		 *
+		 * Ideally we should use userspace thermal governor,
+		 * but it's a much more complex solution.  The "skin"
+		 * zone exists as a simpler solution which prevents
+		 * tablet from getting too hot from a user's tactile
+		 * perspective. The CPU zone is intended to protect
+		 * silicon from damage.
+		 */
+
+		tmp451-skin-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <10000>; /* milliseconds */
+
+			thermal-sensors = <&temp_sensor 0>;
+
+			trips {
+				skip_alert_trip: skin-alert {
+					/* throttle at 50C until temperature drops to 49.5C */
+					temperature = <50000>;
+					hysteresis = <500>;
+					type = "passive";
+				};
+
+				skin-crit {
+					/* shut down at 85C */
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map-skip {
+					trip = <&skip_alert_trip>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		tmp451-cpu-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <10000>; /* milliseconds */
+
+			thermal-sensors = <&temp_sensor 1>;
+
+			trips {
+				cpu_alert_trip: cpu-alert {
+					/* throttle at 85C until temperature drops to 84.5C */
+					temperature = <85000>;
+					hysteresis = <500>;
+					type = "passive";
+				};
+
+				cpu-crit {
+					/* shut down at 95C */
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map-cpu {
+					trip = <&cpu_alert_trip>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/nvidia/tegra124.dtsi
index 8b38f123f554..ce4efa1de509 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra124.dtsi
@@ -94,8 +94,8 @@
 		interrupt-names = "syncpt", "host1x";
 		clocks = <&tegra_car TEGRA124_CLK_HOST1X>;
 		clock-names = "host1x";
-		resets = <&tegra_car 28>;
-		reset-names = "host1x";
+		resets = <&tegra_car 28>, <&mc TEGRA124_MC_RESET_HC>;
+		reset-names = "host1x", "mc";
 		iommus = <&mc TEGRA_SWGROUP_HC>;
 
 		#address-cells = <2>;
@@ -103,6 +103,45 @@
 
 		ranges = <0 0x54000000 0 0x54000000 0 0x01000000>;
 
+		vi@54080000 {
+			compatible = "nvidia,tegra124-vi";
+			reg = <0x0 0x54080000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_VI>;
+			resets = <&tegra_car 20>;
+			reset-names = "vi";
+
+			iommus = <&mc TEGRA_SWGROUP_VI>;
+
+			status = "disabled";
+		};
+
+		isp@54600000 {
+			compatible = "nvidia,tegra124-isp";
+			reg = <0x0 0x54600000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_ISP>;
+			resets = <&tegra_car TEGRA124_CLK_ISP>;
+			reset-names = "isp";
+
+			iommus = <&mc TEGRA_SWGROUP_ISP2>;
+
+			status = "disabled";
+		};
+
+		isp@54680000 {
+			compatible = "nvidia,tegra124-isp";
+			reg = <0x0 0x54680000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_ISPB>;
+			resets = <&tegra_car TEGRA124_CLK_ISPB>;
+			reset-names = "isp";
+
+			iommus = <&mc TEGRA_SWGROUP_ISP2B>;
+
+			status = "disabled";
+		};
+
 		dc@54200000 {
 			compatible = "nvidia,tegra124-dc";
 			reg = <0x0 0x54200000 0x0 0x00040000>;
@@ -165,6 +204,22 @@
 			status = "disabled";
 		};
 
+		dsia: dsi@54300000 {
+			compatible = "nvidia,tegra124-dsi";
+			reg = <0x0 0x54300000 0x0 0x00040000>;
+			clocks = <&tegra_car TEGRA124_CLK_DSIA>,
+				 <&tegra_car TEGRA124_CLK_DSIALP>,
+				 <&tegra_car TEGRA124_CLK_PLL_D_OUT0>;
+			clock-names = "dsi", "lp", "parent";
+			resets = <&tegra_car 48>;
+			reset-names = "dsi";
+			nvidia,mipi-calibrate = <&mipi 0x060>; /* DSIA & DSIB pads */
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		vic@54340000 {
 			compatible = "nvidia,tegra124-vic";
 			reg = <0x0 0x54340000 0x0 0x00040000>;
@@ -177,6 +232,47 @@
 			iommus = <&mc TEGRA_SWGROUP_VIC>;
 		};
 
+		dsib: dsi@54400000 {
+			compatible = "nvidia,tegra124-dsi";
+			reg = <0x0 0x54400000 0x0 0x00040000>;
+			clocks = <&tegra_car TEGRA124_CLK_DSIB>,
+				 <&tegra_car TEGRA124_CLK_DSIBLP>,
+				 <&tegra_car TEGRA124_CLK_PLL_D_OUT0>;
+			clock-names = "dsi", "lp", "parent";
+			resets = <&tegra_car 82>;
+			reset-names = "dsi";
+			nvidia,mipi-calibrate = <&mipi 0x180>; /* DSIC & DSID pads */
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		msenc@544c0000 {
+			compatible = "nvidia,tegra124-msenc";
+			reg = <0x0 0x544c0000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_MSENC>;
+			resets = <&tegra_car TEGRA124_CLK_MSENC>;
+			reset-names = "mpe";
+
+			iommus = <&mc TEGRA_SWGROUP_MSENC>;
+
+			status = "disabled";
+		};
+
+		tsec@54500000 {
+			compatible = "nvidia,tegra124-tsec";
+			reg = <0x0 0x54500000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_TSEC>;
+			resets = <&tegra_car TEGRA124_CLK_TSEC>;
+
+			iommus = <&mc TEGRA_SWGROUP_TSEC>;
+
+			status = "disabled";
+		};
+
 		sor@54540000 {
 			compatible = "nvidia,tegra124-sor";
 			reg = <0x0 0x54540000 0x0 0x00040000>;
@@ -223,12 +319,7 @@
 		interrupt-parent = <&gic>;
 	};
 
-	/*
-	 * Please keep the following 0, notation in place as a former mainline
-	 * U-Boot version was looking for that particular notation in order to
-	 * perform required fix-ups on that GPU node.
-	 */
-	gpu@0,57000000 {
+	gpu@57000000 {
 		compatible = "nvidia,gk20a";
 		reg = <0x0 0x57000000 0x0 0x01000000>,
 		      <0x0 0x58000000 0x0 0x01000000>;
@@ -259,7 +350,7 @@
 	};
 
 	timer@60005000 {
-		compatible = "nvidia,tegra124-timer", "nvidia,tegra30-timer", "nvidia,tegra20-timer";
+		compatible = "nvidia,tegra124-timer", "nvidia,tegra30-timer";
 		reg = <0x0 0x60005000 0x0 0x400>;
 		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
@@ -313,9 +404,7 @@
 		gpio-controller;
 		#interrupt-cells = <2>;
 		interrupt-controller;
-		/*
 		gpio-ranges = <&pinmux 0 0 251>;
-		*/
 	};
 
 	apbdma: dma@60020000 {
@@ -387,7 +476,6 @@
 		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_UARTA>;
 		resets = <&tegra_car 6>;
-		reset-names = "serial";
 		dmas = <&apbdma 8>, <&apbdma 8>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -400,7 +488,6 @@
 		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_UARTB>;
 		resets = <&tegra_car 7>;
-		reset-names = "serial";
 		dmas = <&apbdma 9>, <&apbdma 9>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -413,7 +500,6 @@
 		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_UARTC>;
 		resets = <&tegra_car 55>;
-		reset-names = "serial";
 		dmas = <&apbdma 10>, <&apbdma 10>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -426,7 +512,6 @@
 		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_UARTD>;
 		resets = <&tegra_car 65>;
-		reset-names = "serial";
 		dmas = <&apbdma 19>, <&apbdma 19>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -443,7 +528,7 @@
 	};
 
 	i2c@7000c000 {
-		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		compatible = "nvidia,tegra124-i2c";
 		reg = <0x0 0x7000c000 0x0 0x100>;
 		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -458,7 +543,7 @@
 	};
 
 	i2c@7000c400 {
-		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		compatible = "nvidia,tegra124-i2c";
 		reg = <0x0 0x7000c400 0x0 0x100>;
 		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -473,7 +558,7 @@
 	};
 
 	i2c@7000c500 {
-		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		compatible = "nvidia,tegra124-i2c";
 		reg = <0x0 0x7000c500 0x0 0x100>;
 		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -488,7 +573,7 @@
 	};
 
 	i2c@7000c700 {
-		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		compatible = "nvidia,tegra124-i2c";
 		reg = <0x0 0x7000c700 0x0 0x100>;
 		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -503,7 +588,7 @@
 	};
 
 	i2c@7000d000 {
-		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		compatible = "nvidia,tegra124-i2c";
 		reg = <0x0 0x7000d000 0x0 0x100>;
 		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -518,7 +603,7 @@
 	};
 
 	i2c@7000d100 {
-		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		compatible = "nvidia,tegra124-i2c";
 		reg = <0x0 0x7000d100 0x0 0x100>;
 		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -646,6 +731,16 @@
 		reset-names = "fuse";
 	};
 
+	cec@70015000 {
+		compatible = "nvidia,tegra124-cec";
+		reg = <0x0 0x70015000 0x0 0x00001000>;
+		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_CEC>;
+		clock-names = "cec";
+		status = "disabled";
+		hdmi-phandle = <&hdmi>;
+	};
+
 	mc: memory-controller@70019000 {
 		compatible = "nvidia,tegra124-mc";
 		reg = <0x0 0x70019000 0x0 0x1000>;
@@ -677,10 +772,8 @@
 		      <0x0 0x70020000 0x0 0x7000>; /* SATA */
 		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_SATA>,
-			 <&tegra_car TEGRA124_CLK_SATA_OOB>,
-			 <&tegra_car TEGRA124_CLK_CML1>,
-			 <&tegra_car TEGRA124_CLK_PLL_E>;
-		clock-names = "sata", "sata-oob", "cml1", "pll_e";
+			 <&tegra_car TEGRA124_CLK_SATA_OOB>;
+		clock-names = "sata", "sata-oob";
 		resets = <&tegra_car 124>,
 			 <&tegra_car 129>,
 			 <&tegra_car 123>;
@@ -717,8 +810,8 @@
 			 <&tegra_car TEGRA124_CLK_XUSB_HOST_SRC>,
 			 <&tegra_car TEGRA124_CLK_XUSB_FALCON_SRC>,
 			 <&tegra_car TEGRA124_CLK_XUSB_SS>,
-			 <&tegra_car TEGRA124_CLK_XUSB_SS_SRC>,
 			 <&tegra_car TEGRA124_CLK_XUSB_SS_DIV2>,
+			 <&tegra_car TEGRA124_CLK_XUSB_SS_SRC>,
 			 <&tegra_car TEGRA124_CLK_XUSB_HS_SRC>,
 			 <&tegra_car TEGRA124_CLK_XUSB_FS_SRC>,
 			 <&tegra_car TEGRA124_CLK_PLL_U_480M>,
@@ -726,7 +819,7 @@
 			 <&tegra_car TEGRA124_CLK_PLL_E>;
 		clock-names = "xusb_host", "xusb_host_src",
 			      "xusb_falcon_src", "xusb_ss",
-			      "xusb_ss_src", "xusb_ss_div2",
+			      "xusb_ss_div2", "xusb_ss_src",
 			      "xusb_hs_src", "xusb_fs_src",
 			      "pll_u_480m", "clk_m", "pll_e";
 		resets = <&tegra_car 89>, <&tegra_car 156>,
@@ -915,16 +1008,6 @@
 		status = "disabled";
 	};
 
-	cec@70015000 {
-		compatible = "nvidia,tegra124-cec";
-		reg = <0x0 0x70015000 0x0 0x00001000>;
-		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA124_CLK_CEC>;
-		clock-names = "cec";
-		status = "disabled";
-		hdmi-phandle = <&hdmi>;
-	};
-
 	soctherm: thermal-sensor@700e2000 {
 		compatible = "nvidia,tegra124-soctherm";
 		reg = <0x0 0x700e2000 0x0 0x600>, /* SOC_THERM reg_base */
@@ -951,6 +1034,14 @@
 		};
 	};
 
+	mipi: mipi@700e3000 {
+		compatible = "nvidia,tegra124-mipi";
+		reg = <0x0 0x700e3000 0x0 0x100>;
+		clocks = <&tegra_car TEGRA124_CLK_MIPI_CAL>;
+		clock-names = "mipi-cal";
+		#nvidia,mipi-calibrate-cells = <1>;
+	};
+
 	dfll: clock@70110000 {
 		compatible = "nvidia,tegra124-dfll";
 		reg = <0 0x70110000 0 0x100>, /* DFLL control */
@@ -1079,7 +1170,7 @@
 	};
 
 	usb@7d000000 {
-		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";
+		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci";
 		reg = <0x0 0x7d000000 0x0 0x4000>;
 		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
@@ -1094,6 +1185,7 @@
 		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
 		reg = <0x0 0x7d000000 0x0 0x4000>,
 		      <0x0 0x7d000000 0x0 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA124_CLK_USBD>,
 			 <&tegra_car TEGRA124_CLK_PLL_U>,
@@ -1113,11 +1205,12 @@
 		nvidia,hsdiscon-level = <5>;
 		nvidia,xcvr-hsslew = <12>;
 		nvidia,has-utmi-pad-registers;
+		nvidia,pmc = <&tegra_pmc 0>;
 		status = "disabled";
 	};
 
 	usb@7d004000 {
-		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";
+		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci";
 		reg = <0x0 0x7d004000 0x0 0x4000>;
 		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
@@ -1132,6 +1225,7 @@
 		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
 		reg = <0x0 0x7d004000 0x0 0x4000>,
 		      <0x0 0x7d000000 0x0 0x4000>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA124_CLK_USB2>,
 			 <&tegra_car TEGRA124_CLK_PLL_U>,
@@ -1150,11 +1244,12 @@
 		nvidia,hssquelch-level = <2>;
 		nvidia,hsdiscon-level = <5>;
 		nvidia,xcvr-hsslew = <12>;
+		nvidia,pmc = <&tegra_pmc 1>;
 		status = "disabled";
 	};
 
 	usb@7d008000 {
-		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";
+		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci";
 		reg = <0x0 0x7d008000 0x0 0x4000>;
 		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
@@ -1169,6 +1264,7 @@
 		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
 		reg = <0x0 0x7d008000 0x0 0x4000>,
 		      <0x0 0x7d000000 0x0 0x4000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA124_CLK_USB3>,
 			 <&tegra_car TEGRA124_CLK_PLL_U>,
@@ -1187,6 +1283,7 @@
 		nvidia,hssquelch-level = <2>;
 		nvidia,hsdiscon-level = <5>;
 		nvidia,xcvr-hsslew = <12>;
+		nvidia,pmc = <&tegra_pmc 2>;
 		status = "disabled";
 	};
 
@@ -1241,7 +1338,7 @@
 	};
 
 	thermal-zones {
-		cpu {
+		cpu-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <1000>;
 
@@ -1269,7 +1366,7 @@
 			};
 		};
 
-		mem {
+		mem-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <1000>;
 
@@ -1297,7 +1394,7 @@
 			};
 		};
 
-		gpu {
+		gpu-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <1000>;
 
@@ -1325,7 +1422,7 @@
 			};
 		};
 
-		pllx {
+		pllx-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <1000>;
 
diff --git a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts b/arch/arm/boot/dts/nvidia/tegra20-acer-a500-picasso.dts
index 2280d75b66ab..a619ea83ed3b 100644
--- a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
+++ b/arch/arm/boot/dts/nvidia/tegra20-acer-a500-picasso.dts
@@ -65,7 +65,7 @@
 			rgb {
 				status = "okay";
 
-				port@0 {
+				port {
 					lcd_output: endpoint {
 						remote-endpoint = <&lvds_encoder_input>;
 						bus-width = <18>;
@@ -342,57 +342,76 @@
 			};
 		};
 
-		state_i2cmux_ddc: pinmux_i2cmux_ddc {
+		state_i2cmux_ddc: pinmux-i2cmux-ddc {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "i2c2";
 			};
+
 			pta {
 				nvidia,pins = "pta";
 				nvidia,function = "rsvd4";
 			};
 		};
 
-		state_i2cmux_pta: pinmux_i2cmux_pta {
+		state_i2cmux_idle: pinmux-i2cmux-idle {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "rsvd4";
 			};
+
 			pta {
 				nvidia,pins = "pta";
-				nvidia,function = "i2c2";
+				nvidia,function = "rsvd4";
 			};
 		};
 
-		state_i2cmux_idle: pinmux_i2cmux_idle {
+		state_i2cmux_pta: pinmux-i2cmux-pta {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "rsvd4";
 			};
+
 			pta {
 				nvidia,pins = "pta";
-				nvidia,function = "rsvd4";
+				nvidia,function = "i2c2";
 			};
 		};
 	};
 
+	tegra_spdif: spdif@70002400 {
+		status = "okay";
+
+		nvidia,fixed-parent-rate;
+	};
+
 	tegra_i2s1: i2s@70002800 {
 		status = "okay";
+
+		nvidia,fixed-parent-rate;
 	};
 
 	uartb: serial@70006040 {
 		compatible = "nvidia,tegra20-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
 		/* GPS BCM4751 */
 	};
 
 	uartc: serial@70006200 {
 		compatible = "nvidia,tegra20-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
 		status = "okay";
 
 		/* Azurewave AW-NH665 BCM4329B1 */
 		bluetooth {
 			compatible = "brcm,bcm4329-bt";
 
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "host-wakeup";
+
 			/* PLLP 216MHz / 16 / 4 */
 			max-speed = <3375000>;
 
@@ -403,8 +422,7 @@
 			vddio-supply = <&vdd_1v8_sys>;
 
 			device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
-			host-wakeup-gpios =   <&gpio TEGRA_GPIO(U, 6) GPIO_ACTIVE_HIGH>;
-			shutdown-gpios =      <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
+			shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
 		};
 	};
 
@@ -412,6 +430,10 @@
 		/* Docking station */
 	};
 
+	pwm: pwm@7000a000 {
+		status = "okay";
+	};
+
 	i2c@7000c000 {
 		clock-frequency = <400000>;
 		status = "okay";
@@ -499,51 +521,12 @@
 		status = "okay";
 	};
 
-	i2cmux {
-		compatible = "i2c-mux-pinctrl";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c-parent = <&{/i2c@7000c400}>;
-
-		pinctrl-names = "ddc", "pta", "idle";
-		pinctrl-0 = <&state_i2cmux_ddc>;
-		pinctrl-1 = <&state_i2cmux_pta>;
-		pinctrl-2 = <&state_i2cmux_idle>;
-
-		hdmi_ddc: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		panel_ddc: i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			embedded-controller@58 {
-				compatible = "acer,a500-iconia-ec", "ene,kb930";
-				reg = <0x58>;
-
-				system-power-controller;
-
-				monitored-battery = <&bat1010>;
-				power-supplies = <&mains>;
-			};
-		};
-	};
-
-	pwm: pwm@7000a000 {
-		status = "okay";
-	};
-
 	i2c@7000d000 {
 		clock-frequency = <100000>;
 		status = "okay";
 
 		magnetometer@c {
-			compatible = "ak,ak8975";
+			compatible = "asahi-kasei,ak8975";
 			reg = <0x0c>;
 
 			interrupt-parent = <&gpio>;
@@ -713,396 +696,7 @@
 		nvidia,core-pwr-good-time = <3845 3845>;
 		nvidia,core-pwr-off-time = <458>;
 		nvidia,sys-clock-req-active-high;
-	};
-
-	usb@c5000000 {
-		compatible = "nvidia,tegra20-udc";
-		status = "okay";
-		dr_mode = "peripheral";
-	};
-
-	usb-phy@c5000000 {
-		status = "okay";
-		dr_mode = "peripheral";
-		nvidia,xcvr-setup-use-fuses;
-		nvidia,xcvr-lsfslew = <2>;
-		nvidia,xcvr-lsrslew = <2>;
-	};
-
-	usb@c5008000 {
-		status = "okay";
-	};
-
-	usb-phy@c5008000 {
-		status = "okay";
-		nvidia,xcvr-setup-use-fuses;
-		nvidia,xcvr-lsfslew = <2>;
-		nvidia,xcvr-lsrslew = <2>;
-		vbus-supply = <&vdd_5v0_sys>;
-	};
-
-	brcm_wifi_pwrseq: wifi-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-
-		clocks = <&rtc_32k_wifi>;
-		clock-names = "ext_clock";
-
-		reset-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_LOW>;
-		post-power-on-delay-ms = <300>;
-		power-off-delay-us = <300>;
-	};
-
-	sdmmc1: mmc@c8000000 {
-		status = "okay";
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		assigned-clocks = <&tegra_car TEGRA20_CLK_SDMMC1>;
-		assigned-clock-parents = <&tegra_car TEGRA20_CLK_PLL_C>;
-		assigned-clock-rates = <50000000>;
-
-		max-frequency = <50000000>;
-		keep-power-in-suspend;
-		bus-width = <4>;
-		non-removable;
-
-		mmc-pwrseq = <&brcm_wifi_pwrseq>;
-		vmmc-supply = <&vdd_3v3_sys>;
-		vqmmc-supply = <&vdd_1v8_sys>;
-
-		/* Azurewave AW-NH611 BCM4329 */
-		wifi@1 {
-			reg = <1>;
-			compatible = "brcm,bcm4329-fmac";
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "host-wake";
-		};
-	};
-
-	sdmmc3: mmc@c8000400 {
-		status = "okay";
-		bus-width = <4>;
-		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
-		power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
-		vmmc-supply = <&vdd_3v3_sys>;
-		vqmmc-supply = <&vdd_3v3_sys>;
-	};
-
-	sdmmc4: mmc@c8000600 {
-		status = "okay";
-		bus-width = <8>;
-		vmmc-supply = <&vcore_emmc>;
-		vqmmc-supply = <&vdd_3v3_sys>;
-		non-removable;
-	};
-
-	mains: ac-adapter-detect {
-		compatible = "gpio-charger";
-		charger-type = "mains";
-		gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-
-		enable-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
-		power-supply = <&vdd_3v3_sys>;
-		pwms = <&pwm 2 41667>;
-
-		brightness-levels = <7 255>;
-		num-interpolated-steps = <248>;
-		default-brightness-level = <20>;
-	};
-
-	bat1010: battery-2s1p {
-		compatible = "simple-battery";
-		charge-full-design-microamp-hours = <3260000>;
-		energy-full-design-microwatt-hours = <24000000>;
-		operating-range-celsius = <0 40>;
-	};
-
-	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
-	clk32k_in: clock@0 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-		clock-output-names = "tps658621-out32k";
-	};
-
-	/*
-	 * This standalone onboard fixed-clock always-ON 32KHz
-	 * oscillator is used as a reference clock-source by the
-	 * Azurewave WiFi/BT module.
-	 */
-	rtc_32k_wifi: clock@1 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-		clock-output-names = "kk3270032";
-	};
-
-	cpus {
-		cpu0: cpu@0 {
-			cpu-supply = <&vdd_cpu>;
-			operating-points-v2 = <&cpu0_opp_table>;
-			#cooling-cells = <2>;
-		};
-
-		cpu1: cpu@1 {
-			cpu-supply = <&vdd_cpu>;
-			operating-points-v2 = <&cpu0_opp_table>;
-			#cooling-cells = <2>;
-		};
-	};
-
-	display-panel {
-		compatible = "auo,b101ew05", "panel-lvds";
-
-		ddc-i2c-bus = <&panel_ddc>;
-		power-supply = <&vdd_pnl>;
-		backlight = <&backlight>;
-
-		width-mm = <218>;
-		height-mm = <135>;
-
-		data-mapping = "jeida-18";
-
-		panel-timing {
-			clock-frequency = <71200000>;
-			hactive = <1280>;
-			vactive = <800>;
-			hfront-porch = <8>;
-			hback-porch = <18>;
-			hsync-len = <184>;
-			vsync-len = <3>;
-			vfront-porch = <4>;
-			vback-porch = <8>;
-		};
-
-		port {
-			panel_input: endpoint {
-				remote-endpoint = <&lvds_encoder_output>;
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power {
-			label = "Power";
-			gpios = <&gpio TEGRA_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_POWER>;
-			debounce-interval = <10>;
-			wakeup-event-action = <EV_ACT_ASSERTED>;
-			wakeup-source;
-		};
-
-		rotation-lock {
-			label = "Rotate-lock";
-			gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_HIGH>;
-			linux,code = <SW_ROTATE_LOCK>;
-			linux,input-type = <EV_SW>;
-			debounce-interval = <10>;
-		};
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-			debounce-interval = <10>;
-			wakeup-event-action = <EV_ACT_ASSERTED>;
-			wakeup-source;
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio TEGRA_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-			debounce-interval = <10>;
-			wakeup-event-action = <EV_ACT_ASSERTED>;
-			wakeup-source;
-		};
-	};
-
-	haptic-feedback {
-		compatible = "gpio-vibrator";
-		enable-gpios = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>;
-		vcc-supply = <&vdd_3v3_sys>;
-	};
-
-	lvds-encoder {
-		compatible = "ti,sn75lvds83", "lvds-encoder";
-
-		powerdown-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_LOW>;
-		power-supply = <&vdd_3v3_sys>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				lvds_encoder_input: endpoint {
-					remote-endpoint = <&lcd_output>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				lvds_encoder_output: endpoint {
-					remote-endpoint = <&panel_input>;
-				};
-			};
-		};
-	};
-
-	vdd_5v0_sys: regulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_5v0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	vdd_3v3_sys: regulator@1 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_3v3_vs";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		vin-supply = <&vdd_5v0_sys>;
-	};
-
-	vdd_1v8_sys: regulator@2 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_1v8_vs";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-		vin-supply = <&vdd_5v0_sys>;
-	};
-
-	vdd_pnl: regulator@3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_panel";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-enable-ramp-delay = <300000>;
-		gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		vin-supply = <&vdd_5v0_sys>;
-	};
-
-	sound {
-		compatible = "nvidia,tegra-audio-wm8903-picasso",
-			     "nvidia,tegra-audio-wm8903";
-		nvidia,model = "Acer Iconia Tab A500 WM8903";
-
-		nvidia,audio-routing =
-			"Headphone Jack", "HPOUTR",
-			"Headphone Jack", "HPOUTL",
-			"Int Spk", "LINEOUTL",
-			"Int Spk", "LINEOUTR",
-			"Mic Jack", "MICBIAS",
-			"IN2L", "Mic Jack",
-			"IN2R", "Mic Jack",
-			"IN1L", "Int Mic",
-			"IN1R", "Int Mic";
-
-		nvidia,i2s-controller = <&tegra_i2s1>;
-		nvidia,audio-codec = <&wm8903>;
-
-		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
-		nvidia,int-mic-en-gpios = <&wm8903 1 GPIO_ACTIVE_HIGH>;
-		nvidia,headset;
-
-		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
-			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA20_CLK_CDEV1>;
-		clock-names = "pll_a", "pll_a_out0", "mclk";
-	};
-
-	thermal-zones {
-		/*
-		 * NCT1008 has two sensors:
-		 *
-		 *	0: internal that monitors ambient/skin temperature
-		 *	1: external that is connected to the CPU's diode
-		 *
-		 * Ideally we should use userspace thermal governor,
-		 * but it's a much more complex solution.  The "skin"
-		 * zone is a simpler solution which prevents A500 from
-		 * getting too hot from a user's tactile perspective.
-		 * The CPU zone is intended to protect silicon from damage.
-		 */
-
-		skin-thermal {
-			polling-delay-passive = <1000>; /* milliseconds */
-			polling-delay = <5000>; /* milliseconds */
-
-			thermal-sensors = <&nct1008 0>;
-
-			trips {
-				trip0: skin-alert {
-					/* start throttling at 60C */
-					temperature = <60000>;
-					hysteresis = <200>;
-					type = "passive";
-				};
-
-				trip1: skin-crit {
-					/* shut down at 70C */
-					temperature = <70000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-
-			cooling-maps {
-				map0 {
-					trip = <&trip0>;
-					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
-		};
-
-		cpu-thermal {
-			polling-delay-passive = <1000>; /* milliseconds */
-			polling-delay = <5000>; /* milliseconds */
-
-			thermal-sensors = <&nct1008 1>;
-
-			trips {
-				trip2: cpu-alert {
-					/* throttle at 85C until temperature drops to 84.8C */
-					temperature = <85000>;
-					hysteresis = <200>;
-					type = "passive";
-				};
-
-				trip3: cpu-crit {
-					/* shut down at 90C */
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-
-			cooling-maps {
-				map1 {
-					trip = <&trip2>;
-					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
-		};
+		core-supply = <&vdd_core>;
 	};
 
 	memory-controller@7000f400 {
@@ -1500,9 +1094,434 @@
 			};
 		};
 	};
-};
 
-&emc_icc_dvfs_opp_table {
-	/delete-node/ opp@666000000;
-	/delete-node/ opp@760000000;
+	usb@c5000000 {
+		compatible = "nvidia,tegra20-udc";
+		status = "okay";
+		dr_mode = "peripheral";
+	};
+
+	usb-phy@c5000000 {
+		status = "okay";
+		dr_mode = "peripheral";
+		nvidia,xcvr-setup-use-fuses;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+	};
+
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	usb-phy@c5008000 {
+		status = "okay";
+		nvidia,xcvr-setup-use-fuses;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		vbus-supply = <&vdd_5v0_sys>;
+	};
+
+	sdmmc1: mmc@c8000000 {
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		assigned-clocks = <&tegra_car TEGRA20_CLK_SDMMC1>;
+		assigned-clock-parents = <&tegra_car TEGRA20_CLK_PLL_C>;
+		assigned-clock-rates = <50000000>;
+
+		max-frequency = <50000000>;
+		keep-power-in-suspend;
+		bus-width = <4>;
+		non-removable;
+
+		mmc-pwrseq = <&brcm_wifi_pwrseq>;
+		vmmc-supply = <&vdd_3v3_sys>;
+		vqmmc-supply = <&vdd_1v8_sys>;
+
+		/* Azurewave AW-NH611 BCM4329 */
+		wifi@1 {
+			reg = <1>;
+			compatible = "brcm,bcm4329-fmac";
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host-wake";
+		};
+	};
+
+	sdmmc3: mmc@c8000400 {
+		status = "okay";
+		bus-width = <4>;
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
+		vmmc-supply = <&vdd_3v3_sys>;
+		vqmmc-supply = <&vdd_3v3_sys>;
+	};
+
+	sdmmc4: mmc@c8000600 {
+		status = "okay";
+		bus-width = <8>;
+		vmmc-supply = <&vcore_emmc>;
+		vqmmc-supply = <&vdd_3v3_sys>;
+		non-removable;
+	};
+
+	mains: ac-adapter-detect {
+		compatible = "gpio-charger";
+		charger-type = "mains";
+		gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_3v3_sys>;
+		pwms = <&pwm 2 41667>;
+
+		brightness-levels = <7 255>;
+		num-interpolated-steps = <248>;
+		default-brightness-level = <20>;
+	};
+
+	bat1010: battery-2s1p {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <3260000>;
+		energy-full-design-microwatt-hours = <24000000>;
+		operating-range-celsius = <0 40>;
+	};
+
+	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
+	clk32k_in: clock-32k-in {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "tps658621-out32k";
+	};
+
+	/*
+	 * This standalone onboard fixed-clock always-ON 32KHz
+	 * oscillator is used as a reference clock-source by the
+	 * Azurewave WiFi/BT module.
+	 */
+	rtc_32k_wifi: clock-32k-wifi {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "kk3270032";
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	display-panel {
+		compatible = "auo,b101ew05", "panel-lvds";
+
+		ddc-i2c-bus = <&panel_ddc>;
+		power-supply = <&vdd_pnl>;
+		backlight = <&backlight>;
+
+		width-mm = <218>;
+		height-mm = <135>;
+
+		data-mapping = "jeida-18";
+
+		panel-timing {
+			clock-frequency = <71200000>;
+			hactive = <1280>;
+			vactive = <800>;
+			hfront-porch = <8>;
+			hback-porch = <18>;
+			hsync-len = <184>;
+			vsync-len = <3>;
+			vfront-porch = <4>;
+			vback-porch = <8>;
+		};
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&lvds_encoder_output>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-rotation-lock {
+			label = "Rotate-lock";
+			gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_HIGH>;
+			linux,code = <SW_ROTATE_LOCK>;
+			linux,input-type = <EV_SW>;
+			debounce-interval = <10>;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	haptic-feedback {
+		compatible = "gpio-vibrator";
+		enable-gpios = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>;
+		vcc-supply = <&vdd_3v3_sys>;
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&{/i2c@7000c400}>;
+
+		pinctrl-names = "ddc", "pta", "idle";
+		pinctrl-0 = <&state_i2cmux_ddc>;
+		pinctrl-1 = <&state_i2cmux_pta>;
+		pinctrl-2 = <&state_i2cmux_idle>;
+
+		hdmi_ddc: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		panel_ddc: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			embedded-controller@58 {
+				compatible = "acer,a500-iconia-ec", "ene,kb930";
+				reg = <0x58>;
+
+				system-power-controller;
+
+				monitored-battery = <&bat1010>;
+				power-supplies = <&mains>;
+			};
+		};
+	};
+
+	lvds-encoder {
+		compatible = "ti,sn75lvds83", "lvds-encoder";
+
+		powerdown-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_LOW>;
+		power-supply = <&vdd_3v3_sys>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_encoder_input: endpoint {
+					remote-endpoint = <&lcd_output>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_encoder_output: endpoint {
+					remote-endpoint = <&panel_input>;
+				};
+			};
+		};
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-666000000;
+		/delete-node/ opp-760000000;
+	};
+
+	vdd_5v0_sys: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vdd_3v3_sys: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_vs";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_1v8_sys: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v8_vs";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_pnl: regulator-panel {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_panel";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-enable-ramp-delay = <300000>;
+		gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-wm8903-picasso",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "Acer Iconia Tab A500 WM8903";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "LINEOUTL",
+			"Int Spk", "LINEOUTR",
+			"Mic Jack", "MICBIAS",
+			"IN2L", "Mic Jack",
+			"IN2R", "Mic Jack",
+			"IN1L", "Int Mic",
+			"IN1R", "Int Mic";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+		nvidia,int-mic-en-gpios = <&wm8903 1 GPIO_ACTIVE_HIGH>;
+		nvidia,headset;
+
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA20_CLK_CDEV1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+
+	thermal-zones {
+		/*
+		 * NCT1008 has two sensors:
+		 *
+		 *	0: internal that monitors ambient/skin temperature
+		 *	1: external that is connected to the CPU's diode
+		 *
+		 * Ideally we should use userspace thermal governor,
+		 * but it's a much more complex solution.  The "skin"
+		 * zone is a simpler solution which prevents A500 from
+		 * getting too hot from a user's tactile perspective.
+		 * The CPU zone is intended to protect silicon from damage.
+		 */
+
+		skin-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct1008 0>;
+
+			trips {
+				trip0: skin-alert {
+					/* start throttling at 60C */
+					temperature = <60000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip1: skin-crit {
+					/* shut down at 70C */
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&trip0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct1008 1>;
+
+			trips {
+				trip2: cpu-alert {
+					/* throttle at 85C until temperature drops to 84.8C */
+					temperature = <85000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip3: cpu-crit {
+					/* shut down at 90C */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&trip2>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	brcm_wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+
+		clocks = <&rtc_32k_wifi>;
+		clock-names = "ext_clock";
+
+		reset-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <300>;
+		power-off-delay-us = <300>;
+	};
 };
diff --git a/arch/arm/boot/dts/nvidia/tegra20-asus-sl101.dts b/arch/arm/boot/dts/nvidia/tegra20-asus-sl101.dts
new file mode 100644
index 000000000000..8828129d1fa3
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra20-asus-sl101.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra20-asus-transformer-common.dtsi"
+
+/ {
+	model = "ASUS Eee Pad Slider SL101";
+	compatible = "asus,sl101", "nvidia,tegra20";
+
+	i2c@7000c000 {
+		magnetometer@e {
+			mount-matrix =  "1",  "0",  "0",
+					"0", "-1",  "0",
+					"0",  "0",  "1";
+		};
+
+		/* Atmel MXT1386 Touchscreen */
+		touchscreen@5a {
+			compatible = "atmel,maxtouch";
+			reg = <0x5a>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(V, 6) IRQ_TYPE_LEVEL_LOW>;
+
+			reset-gpios = <&gpio TEGRA_GPIO(Q, 7) GPIO_ACTIVE_LOW>;
+
+			vdda-supply = <&vdd_3v3_sys>;
+			vdd-supply  = <&vdd_3v3_sys>;
+
+			atmel,wakeup-method = <ATMEL_MXT_WAKEUP_I2C_SCL>;
+		};
+
+		gyroscope@68 {
+			mount-matrix =	 "0",  "1",  "0",
+					"-1",  "0",  "0",
+					 "0",  "0",  "1";
+
+			i2c-gate {
+				accelerometer@f {
+					mount-matrix =	 "1",  "0",  "0",
+							 "0", "-1",  "0",
+							 "0",  "0",  "1";
+				};
+			};
+		};
+	};
+
+	extcon-keys {
+		compatible = "gpio-keys";
+
+		switch-tablet-mode {
+			label = "Tablet Mode";
+			gpios = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_TABLET_MODE>;
+			debounce-interval = <500>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra20-asus-tf101.dts b/arch/arm/boot/dts/nvidia/tegra20-asus-tf101.dts
new file mode 100644
index 000000000000..0d93820a5ad4
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra20-asus-tf101.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra20-asus-transformer-common.dtsi"
+
+/ {
+	model = "ASUS Eee Pad Transformer TF101";
+	compatible = "asus,tf101", "nvidia,tegra20";
+
+	i2c@7000c000 {
+		magnetometer@e {
+			mount-matrix = "-1",  "0",  "0",
+					"0",  "1",  "0",
+					"0",  "0", "-1";
+		};
+
+		/* Atmel MXT1386 Touchscreen */
+		touchscreen@5b {
+			compatible = "atmel,maxtouch";
+			reg = <0x5b>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(V, 6) IRQ_TYPE_LEVEL_LOW>;
+
+			reset-gpios = <&gpio TEGRA_GPIO(Q, 7) GPIO_ACTIVE_LOW>;
+
+			vdda-supply = <&vdd_3v3_sys>;
+			vdd-supply  = <&vdd_3v3_sys>;
+
+			atmel,wakeup-method = <ATMEL_MXT_WAKEUP_I2C_SCL>;
+		};
+
+		gyroscope@68 {
+			mount-matrix =	 "0",  "1",  "0",
+					"-1",  "0",  "0",
+					 "0",  "0",  "1";
+
+			i2c-gate {
+				accelerometer@f {
+					mount-matrix =	"-1",  "0",  "0",
+							 "0", "-1",  "0",
+							 "0",  "0", "-1";
+				};
+			};
+		};
+	};
+
+	extcon-keys {
+		compatible = "gpio-keys";
+
+		switch-dock-hall-sensor {
+			label = "Lid";
+			gpios = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			debounce-interval = <500>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra20-asus-transformer-common.dtsi b/arch/arm/boot/dts/nvidia/tegra20-asus-transformer-common.dtsi
new file mode 100644
index 000000000000..b48f53c00efa
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra20-asus-transformer-common.dtsi
@@ -0,0 +1,1268 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/input/atmel-maxtouch.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "tegra20.dtsi"
+#include "tegra20-cpu-opp.dtsi"
+#include "tegra20-cpu-opp-microvolt.dtsi"
+
+/ {
+	chassis-type = "convertible";
+
+	aliases {
+		mmc0 = &sdmmc4; /* eMMC */
+		mmc1 = &sdmmc3; /* MicroSD */
+		mmc2 = &sdmmc1; /* WiFi */
+
+		rtc0 = &pmic;
+		rtc1 = "/rtc@7000e000";
+
+		serial0 = &uartd;
+		serial1 = &uartc; /* Bluetooth */
+		serial2 = &uartb; /* GPS */
+	};
+
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	memory@0 {
+		reg = <0x00000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@2ffe0000 {
+			compatible = "ramoops";
+			reg = <0x2ffe0000 0x10000>;	/* 64kB */
+			console-size = <0x8000>;	/* 32kB */
+			record-size = <0x400>;		/*  1kB */
+			ecc-size = <16>;
+		};
+
+		linux,cma@30000000 {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0x30000000 0x10000000>;
+			size = <0x10000000>; /* 256MiB */
+			linux,cma-default;
+			reusable;
+		};
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+
+				port {
+					lcd_output: endpoint {
+						remote-endpoint = <&lvds_encoder_input>;
+						bus-width = <18>;
+					};
+				};
+			};
+		};
+
+		hdmi@54280000 {
+			status = "okay";
+
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+			hdmi-supply = <&vdd_hdmi_en>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+				GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio@6000d000 {
+		charging-enable-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
+	};
+
+	pinmux@70000014 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			ata {
+				nvidia,pins = "ata";
+				nvidia,function = "ide";
+			};
+
+			atb {
+				nvidia,pins = "atb", "gma", "gme";
+				nvidia,function = "sdio4";
+			};
+
+			atc {
+				nvidia,pins = "atc";
+				nvidia,function = "nand";
+			};
+
+			atd {
+				nvidia,pins = "atd", "ate", "gmb", "spia",
+					"spib", "spic";
+				nvidia,function = "gmi";
+			};
+
+			cdev1 {
+				nvidia,pins = "cdev1";
+				nvidia,function = "plla_out";
+			};
+
+			cdev2 {
+				nvidia,pins = "cdev2";
+				nvidia,function = "pllp_out4";
+			};
+
+			crtp {
+				nvidia,pins = "crtp";
+				nvidia,function = "crt";
+			};
+
+			lm1 {
+				nvidia,pins = "lm1";
+				nvidia,function = "rsvd3";
+			};
+
+			csus {
+				nvidia,pins = "csus";
+				nvidia,function = "vi_sensor_clk";
+			};
+
+			dap1 {
+				nvidia,pins = "dap1";
+				nvidia,function = "dap1";
+			};
+
+			dap2 {
+				nvidia,pins = "dap2";
+				nvidia,function = "dap2";
+			};
+
+			dap3 {
+				nvidia,pins = "dap3";
+				nvidia,function = "dap3";
+			};
+
+			dap4 {
+				nvidia,pins = "dap4";
+				nvidia,function = "dap4";
+			};
+
+			dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
+				nvidia,function = "vi";
+			};
+
+			dtf {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+			};
+
+			gmc {
+				nvidia,pins = "gmc";
+				nvidia,function = "uartd";
+			};
+
+			gmd {
+				nvidia,pins = "gmd";
+				nvidia,function = "sflash";
+			};
+
+			gpu {
+				nvidia,pins = "gpu";
+				nvidia,function = "pwm";
+			};
+
+			gpu7 {
+				nvidia,pins = "gpu7";
+				nvidia,function = "rtck";
+			};
+
+			gpv {
+				nvidia,pins = "gpv", "slxa";
+				nvidia,function = "pcie";
+			};
+
+			hdint {
+				nvidia,pins = "hdint";
+				nvidia,function = "hdmi";
+			};
+
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+			};
+
+			irrx {
+				nvidia,pins = "irrx", "irtx";
+				nvidia,function = "uartb";
+			};
+
+			kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf";
+				nvidia,function = "kbc";
+			};
+
+			lcsn {
+				nvidia,pins = "lcsn", "ldc", "lm0", "lpw1",
+					"lsdi", "lvp0";
+				nvidia,function = "rsvd4";
+			};
+
+			ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lpp", "lpw0",
+					"lpw2", "lsc0", "lsc1", "lsck", "lsda",
+					"lspi", "lvp1", "lvs";
+				nvidia,function = "displaya";
+			};
+
+			owc {
+				nvidia,pins = "owc", "spdi", "spdo", "uac";
+				nvidia,function = "rsvd2";
+			};
+
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
+			};
+
+			rm {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
+			};
+
+			sdb {
+				nvidia,pins = "sdb", "sdc", "sdd", "slxc", "slxk";
+				nvidia,function = "sdio3";
+			};
+
+			sdio1 {
+				nvidia,pins = "sdio1";
+				nvidia,function = "sdio1";
+			};
+
+			slxd {
+				nvidia,pins = "slxd";
+				nvidia,function = "spdif";
+			};
+
+			spid {
+				nvidia,pins = "spid", "spie", "spif";
+				nvidia,function = "spi1";
+			};
+
+			spig {
+				nvidia,pins = "spig", "spih";
+				nvidia,function = "spi2_alt";
+			};
+
+			uaa {
+				nvidia,pins = "uaa", "uab", "uda";
+				nvidia,function = "ulpi";
+			};
+
+			uad {
+				nvidia,pins = "uad";
+				nvidia,function = "irda";
+			};
+
+			uca {
+				nvidia,pins = "uca", "ucb";
+				nvidia,function = "uartc";
+			};
+
+			conf-ata {
+				nvidia,pins = "ata", "atb", "atc", "atd",
+					"cdev1", "cdev2", "dap1", "dap4",
+					"dte", "ddc", "dtf", "gma", "gmc",
+					"gme", "gpu", "gpu7", "gpv", "i2cp",
+					"irrx", "irtx", "pta", "rm", "sdc",
+					"sdd", "slxc", "slxd", "slxk", "spdi",
+					"spdo", "uac", "uad",
+					"uda", "csus";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			conf-ate {
+				nvidia,pins = "ate", "dap2", "dap3", "gmb", "gmd",
+					"owc", "spia", "spib", "spic",
+					"spid", "spie", "spig", "slxa";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			conf-ck32 {
+				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+			};
+
+			conf-crtp {
+				nvidia,pins = "crtp", "spih";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			conf-dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			conf-spif {
+				nvidia,pins = "spif";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			conf-hdint {
+				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
+					"lpw1", "lsck", "lsda", "lsdi", "lvp0";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			conf-kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf", "sdio1", "uaa", "uab",
+					"uca", "ucb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			conf-lc {
+				nvidia,pins = "lc", "ls";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+			};
+
+			conf-ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lm0", "lpp",
+					"lpw0", "lpw2", "lsc0", "lsc1", "lspi",
+					"lvp1", "lvs", "pmc", "sdb";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			conf-ld17-0 {
+				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+					"ld23_22";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+			};
+
+			drive-sdio1 {
+				nvidia,pins = "drive_sdio1", "drive_ddc", "drive_vi1";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+
+			drive-csus {
+				nvidia,pins = "drive_csus";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+		};
+
+		state_i2cmux_ddc: pinmux-i2cmux-ddc {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+			};
+
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+
+		state_i2cmux_idle: pinmux-i2cmux-idle {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+
+		state_i2cmux_pta: pinmux-i2cmux-pta {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "i2c2";
+			};
+		};
+	};
+
+	spdif@70002400 {
+		status = "okay";
+
+		nvidia,fixed-parent-rate;
+	};
+
+	i2s@70002800 {
+		status = "okay";
+
+		nvidia,fixed-parent-rate;
+	};
+
+	serial@70006040 {
+		compatible = "nvidia,tegra20-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
+		/* GPS BCM4751 */
+	};
+
+	serial@70006200 {
+		compatible = "nvidia,tegra20-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
+		status = "okay";
+
+		/* Azurewave AW-NH615 BCM4329B1 */
+		bluetooth {
+			compatible = "brcm,bcm4329-bt";
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "host-wakeup";
+
+			/* PLLP 216MHz / 16 / 4 */
+			max-speed = <3375000>;
+
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+			clock-names = "txco";
+
+			vbat-supply  = <&vdd_3v3_sys>;
+			vddio-supply = <&vdd_1v8_sys>;
+
+			device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
+			shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	serial@70006300 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* Aichi AMI306 digital compass */
+		magnetometer@e {
+			compatible = "asahi-kasei,ak8974";
+			reg = <0xe>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(N, 5) IRQ_TYPE_EDGE_RISING>;
+
+			avdd-supply = <&vdd_3v3_sys>;
+			dvdd-supply = <&vdd_1v8_sys>;
+		};
+
+		wm8903: audio-codec@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_EDGE_BOTH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0x83>;
+			micdet-delay = <100>;
+
+			gpio-cfg = <
+				0x00000600 /* DMIC_LR, output */
+				0x00000680 /* DMIC_DAT, input */
+				0x00000000 /* Speaker-enable GPIO, output, low */
+				0xffffffff /* don't touch */
+				0xffffffff /* don't touch */
+			>;
+
+			AVDD-supply  = <&vdd_1v8_sys>;
+			CPVDD-supply = <&vdd_1v8_sys>;
+			DBVDD-supply = <&vdd_1v8_sys>;
+			DCVDD-supply = <&vdd_1v8_sys>;
+		};
+
+		gyroscope@68 {
+			compatible = "invensense,mpu3050";
+			reg = <0x68>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(Z, 4) IRQ_TYPE_EDGE_RISING>;
+
+			vdd-supply    = <&vdd_3v3_sys>;
+			vlogic-supply = <&vdd_1v8_sys>;
+
+			i2c-gate {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				accelerometer@f {
+					compatible = "kionix,kxtf9";
+					reg = <0xf>;
+
+					interrupt-parent = <&gpio>;
+					interrupts = <TEGRA_GPIO(N, 4) IRQ_TYPE_EDGE_RISING>;
+
+					vdd-supply = <&vdd_1v8_sys>;
+					vddio-supply = <&vdd_1v8_sys>;
+				};
+			};
+		};
+	};
+
+	i2c2: i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: pmic@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			sys-supply = <&vdd_5v0_sys>;
+			vin-sm0-supply = <&sys_reg>;
+			vin-sm1-supply = <&sys_reg>;
+			vin-sm2-supply = <&sys_reg>;
+			vinldo01-supply = <&sm2_reg>;
+			vinldo23-supply = <&sm2_reg>;
+			vinldo4-supply = <&sm2_reg>;
+			vinldo678-supply = <&sm2_reg>;
+			vinldo9-supply = <&sm2_reg>;
+
+			regulators {
+				sys_reg: sys {
+					regulator-name = "vdd_sys";
+					regulator-always-on;
+				};
+
+				vdd_core: sm0 {
+					regulator-name = "vdd_sm0,vdd_core";
+					regulator-min-microvolt = <950000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-coupled-with = <&rtc_vdd &vdd_cpu>;
+					regulator-coupled-max-spread = <170000 550000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-core-regulator;
+				};
+
+				vdd_cpu: sm1 {
+					regulator-name = "vdd_sm1,vdd_cpu";
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt = <1125000>;
+					regulator-coupled-with = <&vdd_core &rtc_vdd>;
+					regulator-coupled-max-spread = <550000 550000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-cpu-regulator;
+				};
+
+				sm2_reg: sm2 {
+					regulator-name = "vdd_sm2,vin_ldo*";
+					regulator-min-microvolt = <3700000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+				};
+
+				/* LDO0 is not connected to anything */
+
+				ldo1 {
+					regulator-name = "vdd_ldo1,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				rtc_vdd: ldo2 {
+					regulator-name = "vdd_ldo2,vdd_rtc";
+					regulator-min-microvolt = <950000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-coupled-with = <&vdd_core &vdd_cpu>;
+					regulator-coupled-max-spread = <170000 550000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-rtc-regulator;
+				};
+
+				ldo3 {
+					regulator-name = "vdd_ldo3,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				vcore_emmc: ldo5 {
+					regulator-name = "vdd_ldo5,vcore_mmc";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo6 {
+					regulator-name = "vdd_ldo6,avdd_vdac";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				hdmi_vdd_reg: ldo7 {
+					regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				hdmi_pll_reg: ldo8 {
+					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo9 {
+					regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo_rtc {
+					regulator-name = "vdd_rtc_out,vdd_cell";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		nct1008: temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+			vcc-supply = <&vdd_3v3_sys>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(N, 6) IRQ_TYPE_EDGE_FALLING>;
+
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <100>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <458>;
+		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
+	};
+
+	memory-controller@7000f400 {
+		nvidia,use-ram-code;
+
+		emc-tables@3 {
+			reg = <0x3>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			emc-table@25000 {
+				reg = <25000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <25000>;
+				nvidia,emc-registers = <0x00000002 0x00000006
+					0x00000003 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000004
+					0x00000003 0x00000008 0x0000000b 0x0000004d
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000068 0x00000000 0x00000003
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x00070000 0x00000000 0x00000000 0x00000003
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@50000 {
+				reg = <50000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <50000>;
+				nvidia,emc-registers = <0x00000003 0x00000007
+					0x00000003 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x0000009f
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000007
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x000000d0 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x00070000 0x00000000 0x00000000 0x00000005
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@75000 {
+				reg = <75000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <75000>;
+				nvidia,emc-registers = <0x00000005 0x0000000a
+					0x00000004 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x000000ff
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x0000000b
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000138 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x00070000 0x00000000 0x00000000 0x00000007
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@150000 {
+				reg = <150000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <150000>;
+				nvidia,emc-registers = <0x00000009 0x00000014
+					0x00000007 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x0000021f
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000015
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000270 0x00000000 0x00000001
+					0x00000000 0x00000000 0x00000282 0xa07c04ae
+					0x007dc010 0x00000000 0x00000000 0x0000000e
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@300000 {
+				reg = <300000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <300000>;
+				nvidia,emc-registers = <0x00000012 0x00000027
+					0x0000000d 0x00000006 0x00000007 0x00000005
+					0x00000003 0x00000009 0x00000006 0x00000006
+					0x00000003 0x00000003 0x00000002 0x00000006
+					0x00000003 0x00000009 0x0000000c 0x0000045f
+					0x00000000 0x00000004 0x00000004 0x00000006
+					0x00000008 0x00000001 0x0000000e 0x0000002a
+					0x00000003 0x0000000f 0x00000007 0x00000005
+					0x00000002 0x000004e0 0x00000005 0x00000002
+					0x00000000 0x00000000 0x00000282 0xe059048b
+					0x007e0010 0x00000000 0x00000000 0x0000001b
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			lpddr2 {
+				compatible = "elpida,B8132B2PB-6D-F", "jedec,lpddr2-s4";
+				revision-id = <1 0>;
+				density = <2048>;
+				io-width = <16>;
+			};
+		};
+	};
+
+	/* Peripheral USB via ASUS connector */
+	usb@c5000000 {
+		compatible = "nvidia,tegra20-udc";
+		status = "okay";
+		dr_mode = "peripheral";
+	};
+
+	usb-phy@c5000000 {
+		status = "okay";
+		dr_mode = "peripheral";
+		nvidia,xcvr-setup-use-fuses;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		vbus-supply = <&vdd_5v0_sys>;
+	};
+
+	/* Dock's USB port */
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	usb-phy@c5008000 {
+		status = "okay";
+		nvidia,xcvr-setup-use-fuses;
+		vbus-supply = <&vdd_5v0_sys>;
+	};
+
+	sdmmc1: mmc@c8000000 {
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		assigned-clocks = <&tegra_car TEGRA20_CLK_SDMMC1>;
+		assigned-clock-parents = <&tegra_car TEGRA20_CLK_PLL_C>;
+		assigned-clock-rates = <40000000>;
+
+		max-frequency = <40000000>;
+		keep-power-in-suspend;
+		bus-width = <4>;
+		non-removable;
+
+		mmc-pwrseq = <&brcm_wifi_pwrseq>;
+		vmmc-supply = <&vdd_3v3_sys>;
+		vqmmc-supply = <&vdd_3v3_sys>;
+
+		/* Azurewave AW-NH615 BCM4329B1 */
+		wifi@1 {
+			compatible = "brcm,bcm4329-fmac";
+			reg = <1>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host-wake";
+		};
+	};
+
+	sdmmc3: mmc@c8000400 {
+		status = "okay";
+		bus-width = <4>;
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+		power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
+		vmmc-supply = <&vdd_3v3_sys>;
+		vqmmc-supply = <&vdd_3v3_sys>;
+	};
+
+	sdmmc4: mmc@c8000600 {
+		status = "okay";
+		bus-width = <8>;
+		vmmc-supply = <&vcore_emmc>;
+		vqmmc-supply = <&vdd_3v3_sys>;
+		non-removable;
+	};
+
+	mains: ac-adapter-detect {
+		compatible = "gpio-charger";
+		charger-type = "mains";
+		gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_3v3_sys>;
+		pwms = <&pwm 2 4000000>;
+
+		brightness-levels = <7 255>;
+		num-interpolated-steps = <248>;
+		default-brightness-level = <20>;
+	};
+
+	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
+	clk32k_in: clock-32k-in {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	display-panel {
+		compatible = "auo,b101ew05", "panel-lvds";
+
+		/* AUO B101EW05 using custom timings */
+
+		backlight = <&backlight>;
+		ddc-i2c-bus = <&lvds_ddc>;
+		power-supply = <&vdd_pnl_reg>;
+
+		width-mm = <218>;
+		height-mm = <135>;
+
+		data-mapping = "jeida-18";
+
+		panel-timing {
+			clock-frequency = <71200000>;
+			hactive = <1280>;
+			vactive = <800>;
+			hfront-porch = <8>;
+			hback-porch = <18>;
+			hsync-len = <184>;
+			vsync-len = <3>;
+			vfront-porch = <4>;
+			vback-porch = <8>;
+		};
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&lvds_encoder_output>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&i2c2>;
+
+		pinctrl-names = "ddc", "pta", "idle";
+		pinctrl-0 = <&state_i2cmux_ddc>;
+		pinctrl-1 = <&state_i2cmux_pta>;
+		pinctrl-2 = <&state_i2cmux_idle>;
+
+		hdmi_ddc: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		lvds_ddc: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smart-battery@b {
+				compatible = "ti,bq20z75", "sbs,sbs-battery";
+				reg = <0xb>;
+				sbs,i2c-retry-count = <2>;
+				sbs,poll-retry-count = <10>;
+				power-supplies = <&mains>;
+			};
+
+			/* Dynaimage ambient light sensor */
+			light-sensor@1c {
+				compatible = "dynaimage,al3000a";
+				reg = <0x1c>;
+
+				interrupt-parent = <&gpio>;
+				interrupts = <TEGRA_GPIO(Z, 2) IRQ_TYPE_LEVEL_HIGH>;
+
+				vdd-supply = <&vdd_1v8_sys>;
+			};
+		};
+	};
+
+	lvds-encoder {
+		compatible = "ti,sn75lvds83", "lvds-encoder";
+
+		powerdown-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_LOW>;
+		power-supply = <&vdd_3v3_sys>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_encoder_input: endpoint {
+					remote-endpoint = <&lcd_output>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_encoder_output: endpoint {
+					remote-endpoint = <&panel_input>;
+				};
+			};
+		};
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-666000000;
+		/delete-node/ opp-760000000;
+	};
+
+	vdd_5v0_sys: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vdd_3v3_sys: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_vs";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	regulator-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie_vdd";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+	};
+
+	vdd_pnl_reg: regulator-panel {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_pnl";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vdd_1v8_sys: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v8_vs";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_hdmi_en: regulator-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_hdmi_en";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vdd_5v0_sys>;
+		gpio = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "asus,tegra-audio-wm8903-tf101",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "Asus EeePad Transformer WM8903";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"IN2L", "Mic Jack",
+			"DMICDAT", "Int Mic";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+		nvidia,mic-det-gpios = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_LOW>;
+		nvidia,coupled-mic-hp-det;
+
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA20_CLK_CDEV1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+
+	thermal-zones {
+		/*
+		 * NCT1008 has two sensors:
+		 *
+		 *	0: internal that monitors ambient/skin temperature
+		 *	1: external that is connected to the CPU's diode
+		 *
+		 * Ideally we should use userspace thermal governor,
+		 * but it's a much more complex solution.  The "skin"
+		 * zone is a simpler solution which prevents TF101 from
+		 * getting too hot from a user's tactile perspective.
+		 * The CPU zone is intended to protect silicon from damage.
+		 */
+
+		skin-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct1008 0>;
+
+			trips {
+				trip0: skin-alert {
+					/* start throttling at 60C */
+					temperature = <60000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip1: skin-crit {
+					/* shut down at 70C */
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&trip0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct1008 1>;
+
+			trips {
+				trip2: cpu-alert {
+					/* throttle at 85C until temperature drops to 84.8C */
+					temperature = <85000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip3: cpu-crit {
+					/* shut down at 90C */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&trip2>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	brcm_wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+
+		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+		clock-names = "ext_clock";
+
+		reset-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <200>;
+		power-off-delay-us = <200>;
+	};
+};
diff --git a/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts b/arch/arm/boot/dts/nvidia/tegra20-colibri-eval-v3.dts
index a05fb3853da8..be2ead4147f2 100644
--- a/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/nvidia/tegra20-colibri-eval-v3.dts
@@ -70,11 +70,11 @@
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 
-			pwm-a-b {
+			sdc {
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 
-			pwm-c-d {
+			sdb_sdd {
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 
@@ -102,6 +102,8 @@
 
 	/* Colibri UART-A */
 	serial@70006000 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
@@ -143,6 +145,24 @@
 		status = "okay";
 	};
 
+	/* SPI4: Colibri SSP */
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+
+		can@0 {
+			compatible = "microchip,mcp2515";
+			reg = <0>;
+			clocks = <&clk16m>;
+			interrupt-parent = <&gpio>;
+			/* CAN_INT */
+			interrupts = <TEGRA_GPIO(A, 0) IRQ_TYPE_EDGE_FALLING>;
+			spi-max-frequency = <10000000>;
+			vdd-supply = <&reg_3v3>;
+			xceiver-supply = <&reg_5v0>;
+		};
+	};
+
 	/* EHCI instance 0: USB1_DP/N -> USBC_P/N */
 	usb@c5000000 {
 		status = "okay";
@@ -164,24 +184,6 @@
 		vbus-supply = <&reg_usbh_vbus>;
 	};
 
-	/* SPI4: Colibri SSP */
-	spi@7000da00 {
-		status = "okay";
-		spi-max-frequency = <25000000>;
-
-		can@0 {
-			compatible = "microchip,mcp2515";
-			reg = <0>;
-			clocks = <&clk16m>;
-			interrupt-parent = <&gpio>;
-			/* CAN_INT */
-			interrupts = <TEGRA_GPIO(A, 0) IRQ_TYPE_EDGE_FALLING>;
-			spi-max-frequency = <10000000>;
-			vdd-supply = <&reg_3v3>;
-			xceiver-supply = <&reg_5v0>;
-		};
-	};
-
 	/* SD/MMC */
 	mmc@c8000600 {
 		status = "okay";
@@ -200,7 +202,7 @@
 		pwms = <&pwm 0 5000000>; /* PWM<A> */
 	};
 
-	clk16m: osc3 {
+	clk16m: clock-osc3 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <16000000>;
@@ -209,7 +211,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wakeup {
+		key-wakeup {
 			label = "SODIMM pin 45 wakeup";
 			gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_WAKEUP>;
diff --git a/arch/arm/boot/dts/tegra20-colibri-iris.dts b/arch/arm/boot/dts/nvidia/tegra20-colibri-iris.dts
index 425494b9ed54..1da202ad1ded 100644
--- a/arch/arm/boot/dts/tegra20-colibri-iris.dts
+++ b/arch/arm/boot/dts/nvidia/tegra20-colibri-iris.dts
@@ -70,11 +70,11 @@
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 
-			pwm-a-b {
+			sdc {
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 
-			pwm-c-d {
+			sdb_sdd {
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 
@@ -102,6 +102,8 @@
 
 	/* Colibri UART-A */
 	serial@70006000 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
@@ -143,6 +145,12 @@
 		status = "okay";
 	};
 
+	/* SPI4: Colibri SSP */
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+	};
+
 	/* EHCI instance 0: USB1_DP/N -> USBC_P/N */
 	usb@c5000000 {
 		status = "okay";
@@ -164,12 +172,6 @@
 		vbus-supply = <&reg_usbh_vbus>;
 	};
 
-	/* SPI4: Colibri SSP */
-	spi@7000da00 {
-		status = "okay";
-		spi-max-frequency = <25000000>;
-	};
-
 	/* SD/MMC */
 	mmc@c8000600 {
 		status = "okay";
@@ -191,7 +193,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wakeup {
+		key-wakeup {
 			label = "SODIMM pin 45 wakeup";
 			gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_WAKEUP>;
diff --git a/arch/arm/boot/dts/tegra20-colibri.dtsi b/arch/arm/boot/dts/nvidia/tegra20-colibri.dtsi
index 585a5b441cf6..2ff7be8f1382 100644
--- a/arch/arm/boot/dts/tegra20-colibri.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra20-colibri.dtsi
@@ -27,6 +27,31 @@
 		};
 	};
 
+	gpio@6000d000 {
+		lan-reset-n-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(V, 4) GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "LAN_RESET#";
+		};
+
+		/* Tri-stating GMI_WR_N on SODIMM pin 99 nPWE */
+		npwe-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "Tri-state nPWE";
+		};
+
+		/* Not tri-stating GMI_WR_N on SODIMM pin 93 RDnWR */
+		rdnwr-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(T, 6) GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "Not tri-state RDnWR";
+		};
+	};
+
 	pinmux@70000014 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&state_default>;
@@ -113,7 +138,7 @@
 			};
 
 			/* Colibri Backlight PWM<A>, PWM<B> */
-			pwm-a-b {
+			sdc {
 				nvidia,pins = "sdc";
 				nvidia,function = "pwm";
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
@@ -242,7 +267,7 @@
 			};
 
 			/* Colibri PWM<C>, PWM<D> */
-			pwm-c-d {
+			sdb_sdd {
 				nvidia,pins = "sdb", "sdd";
 				nvidia,function = "pwm";
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
@@ -420,18 +445,22 @@
 
 	tegra_ac97: ac97@70002000 {
 		status = "okay";
-		nvidia,codec-reset-gpio =
-			<&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_HIGH>;
-		nvidia,codec-sync-gpio =
+		nvidia,codec-reset-gpios =
+			<&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
+		nvidia,codec-sync-gpios =
 			<&gpio TEGRA_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
 	};
 
 	serial@70006040 {
 		compatible = "nvidia,tegra20-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
 	};
 
 	serial@70006300 {
 		compatible = "nvidia,tegra20-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
 	};
 
 	nand-controller@70008000 {
@@ -495,7 +524,7 @@
 					regulator-always-on;
 				};
 
-				sm0 {
+				vdd_core: sm0 {
 					regulator-name = "VDD_CORE_1.2V";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
@@ -601,6 +630,7 @@
 		nvidia,core-pwr-good-time = <3845 3845>;
 		nvidia,core-pwr-off-time = <3875>;
 		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
 
 		/* Set SLEEP MODE bit in SUPPLYENE register of TPS658643 PMIC */
 		i2c-thermtrip {
@@ -688,7 +718,8 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		asix@1 {
+		ethernet@1 {
+			compatible = "usbb95,772b";
 			reg = <1>;
 			local-mac-address = [00 00 00 00 00 00];
 		};
@@ -701,12 +732,16 @@
 		vbus-supply = <&reg_lan_v_bus>;
 	};
 
-	clk32k_in: xtal3 {
+	clk32k_in: clock-xtal3 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32768>;
 	};
 
+	opp-table-emc {
+		/delete-node/ opp-760000000;
+	};
+
 	reg_lan_v_bus: regulator-lan-v-bus {
 		compatible = "regulator-fixed";
 		regulator-name = "LAN_V_BUS";
@@ -741,32 +776,3 @@
 		clock-names = "pll_a", "pll_a_out0", "mclk";
 	};
 };
-
-&emc_icc_dvfs_opp_table {
-	/delete-node/ opp@760000000;
-};
-
-&gpio {
-	lan-reset-n {
-		gpio-hog;
-		gpios = <TEGRA_GPIO(V, 4) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "LAN_RESET#";
-	};
-
-	/* Tri-stating GMI_WR_N on SODIMM pin 99 nPWE */
-	npwe {
-		gpio-hog;
-		gpios = <TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "Tri-state nPWE";
-	};
-
-	/* Not tri-stating GMI_WR_N on SODIMM pin 93 RDnWR */
-	rdnwr {
-		gpio-hog;
-		gpios = <TEGRA_GPIO(T, 6) GPIO_ACTIVE_HIGH>;
-		output-low;
-		line-name = "Not tri-state RDnWR";
-	};
-};
diff --git a/arch/arm/boot/dts/nvidia/tegra20-cpu-opp-microvolt.dtsi b/arch/arm/boot/dts/nvidia/tegra20-cpu-opp-microvolt.dtsi
new file mode 100644
index 000000000000..7330c1b13d93
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra20-cpu-opp-microvolt.dtsi
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	cpu0_opp_table: opp-table-cpu0 {
+		opp-216000000-750 {
+			opp-microvolt = <750000 750000 1125000>;
+		};
+
+		opp-216000000-800 {
+			opp-microvolt = <800000 800000 1125000>;
+		};
+
+		opp-312000000-750 {
+			opp-microvolt = <750000 750000 1125000>;
+		};
+
+		opp-312000000-800 {
+			opp-microvolt = <800000 800000 1125000>;
+		};
+
+		opp-456000000-750 {
+			opp-microvolt = <750000 750000 1125000>;
+		};
+
+		opp-456000000-800 {
+			opp-microvolt = <800000 800000 1125000>;
+		};
+
+		opp-456000000-825 {
+			opp-microvolt = <825000 825000 1125000>;
+		};
+
+		opp-608000000-750 {
+			opp-microvolt = <750000 750000 1125000>;
+		};
+
+		opp-608000000-800 {
+			opp-microvolt = <800000 800000 1125000>;
+		};
+
+		opp-608000000-825 {
+			opp-microvolt = <825000 825000 1125000>;
+		};
+
+		opp-608000000-850 {
+			opp-microvolt = <850000 850000 1125000>;
+		};
+
+		opp-608000000-900 {
+			opp-microvolt = <900000 900000 1125000>;
+		};
+
+		opp-760000000-775 {
+			opp-microvolt = <775000 775000 1125000>;
+		};
+
+		opp-760000000-800 {
+			opp-microvolt = <800000 800000 1125000>;
+		};
+
+		opp-760000000-850 {
+			opp-microvolt = <850000 850000 1125000>;
+		};
+
+		opp-760000000-875 {
+			opp-microvolt = <875000 875000 1125000>;
+		};
+
+		opp-760000000-900 {
+			opp-microvolt = <900000 900000 1125000>;
+		};
+
+		opp-760000000-975 {
+			opp-microvolt = <975000 975000 1125000>;
+		};
+
+		opp-816000000-800 {
+			opp-microvolt = <800000 800000 1125000>;
+		};
+
+		opp-816000000-850 {
+			opp-microvolt = <850000 850000 1125000>;
+		};
+
+		opp-816000000-875 {
+			opp-microvolt = <875000 875000 1125000>;
+		};
+
+		opp-816000000-950 {
+			opp-microvolt = <950000 950000 1125000>;
+		};
+
+		opp-816000000-1000 {
+			opp-microvolt = <1000000 1000000 1125000>;
+		};
+
+		opp-912000000-850 {
+			opp-microvolt = <850000 850000 1125000>;
+		};
+
+		opp-912000000-900 {
+			opp-microvolt = <900000 900000 1125000>;
+		};
+
+		opp-912000000-925 {
+			opp-microvolt = <925000 925000 1125000>;
+		};
+
+		opp-912000000-950 {
+			opp-microvolt = <950000 950000 1125000>;
+		};
+
+		opp-912000000-1000 {
+			opp-microvolt = <1000000 1000000 1125000>;
+		};
+
+		opp-912000000-1050 {
+			opp-microvolt = <1050000 1050000 1125000>;
+		};
+
+		opp-1000000000-875 {
+			opp-microvolt = <875000 875000 1125000>;
+		};
+
+		opp-1000000000-900 {
+			opp-microvolt = <900000 900000 1125000>;
+		};
+
+		opp-1000000000-950 {
+			opp-microvolt = <950000 950000 1125000>;
+		};
+
+		opp-1000000000-975 {
+			opp-microvolt = <975000 975000 1125000>;
+		};
+
+		opp-1000000000-1000 {
+			opp-microvolt = <1000000 1000000 1125000>;
+		};
+
+		opp-1000000000-1025 {
+			opp-microvolt = <1025000 1025000 1125000>;
+		};
+
+		opp-1000000000-1100 {
+			opp-microvolt = <1100000 1100000 1125000>;
+		};
+
+		opp-1200000000-1000 {
+			opp-microvolt = <1000000 1000000 1125000>;
+		};
+
+		opp-1200000000-1050 {
+			opp-microvolt = <1050000 1050000 1125000>;
+		};
+
+		opp-1200000000-1100 {
+			opp-microvolt = <1100000 1100000 1125000>;
+		};
+
+		opp-1200000000-1125 {
+			opp-microvolt = <1125000 1125000 1125000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra20-cpu-opp.dtsi b/arch/arm/boot/dts/nvidia/tegra20-cpu-opp.dtsi
index 135de316383b..47c8e78ca958 100644
--- a/arch/arm/boot/dts/tegra20-cpu-opp.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra20-cpu-opp.dtsi
@@ -1,250 +1,250 @@
 // SPDX-License-Identifier: GPL-2.0
 
 / {
-	cpu0_opp_table: cpu_opp_table0 {
+	cpu0_opp_table: opp-table-cpu0 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp@216000000,750 {
+		opp-216000000-750 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x0F 0x0003>;
 			opp-hz = /bits/ 64 <216000000>;
 			opp-suspend;
 		};
 
-		opp@216000000,800 {
+		opp-216000000-800 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x0F 0x0004>;
 			opp-hz = /bits/ 64 <216000000>;
 			opp-suspend;
 		};
 
-		opp@312000000,750 {
+		opp-312000000-750 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x0F 0x0003>;
 			opp-hz = /bits/ 64 <312000000>;
 		};
 
-		opp@312000000,800 {
+		opp-312000000-800 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x0F 0x0004>;
 			opp-hz = /bits/ 64 <312000000>;
 		};
 
-		opp@456000000,750 {
+		opp-456000000-750 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x0C 0x0003>;
 			opp-hz = /bits/ 64 <456000000>;
 		};
 
-		opp@456000000,800 {
+		opp-456000000-800 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x03 0x0006>, <0x04 0x0004>,
 					   <0x08 0x0004>;
 			opp-hz = /bits/ 64 <456000000>;
 		};
 
-		opp@456000000,825 {
+		opp-456000000-825 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x03 0x0001>;
 			opp-hz = /bits/ 64 <456000000>;
 		};
 
-		opp@608000000,750 {
+		opp-608000000-750 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x08 0x0003>;
 			opp-hz = /bits/ 64 <608000000>;
 		};
 
-		opp@608000000,800 {
+		opp-608000000-800 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0006>, <0x08 0x0004>;
 			opp-hz = /bits/ 64 <608000000>;
 		};
 
-		opp@608000000,825 {
+		opp-608000000-825 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0001>;
 			opp-hz = /bits/ 64 <608000000>;
 		};
 
-		opp@608000000,850 {
+		opp-608000000-850 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x03 0x0006>;
 			opp-hz = /bits/ 64 <608000000>;
 		};
 
-		opp@608000000,900 {
+		opp-608000000-900 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x03 0x0001>;
 			opp-hz = /bits/ 64 <608000000>;
 		};
 
-		opp@760000000,775 {
+		opp-760000000-775 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x08 0x0003>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000,800 {
+		opp-760000000-800 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x08 0x0004>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000,850 {
+		opp-760000000-850 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0006>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000,875 {
+		opp-760000000-875 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0001>, <0x02 0x0002>,
 					   <0x01 0x0004>, <0x02 0x0004>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000,900 {
+		opp-760000000-900 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x01 0x0002>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000,975 {
+		opp-760000000-975 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x03 0x0001>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@816000000,800 {
+		opp-816000000-800 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x08 0x0007>;
 			opp-hz = /bits/ 64 <816000000>;
 		};
 
-		opp@816000000,850 {
+		opp-816000000-850 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0002>;
 			opp-hz = /bits/ 64 <816000000>;
 		};
 
-		opp@816000000,875 {
+		opp-816000000-875 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0005>;
 			opp-hz = /bits/ 64 <816000000>;
 		};
 
-		opp@816000000,950 {
+		opp-816000000-950 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x03 0x0006>;
 			opp-hz = /bits/ 64 <816000000>;
 		};
 
-		opp@816000000,1000 {
+		opp-816000000-1000 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x03 0x0001>;
 			opp-hz = /bits/ 64 <816000000>;
 		};
 
-		opp@912000000,850 {
+		opp-912000000-850 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x08 0x0007>;
 			opp-hz = /bits/ 64 <912000000>;
 		};
 
-		opp@912000000,900 {
+		opp-912000000-900 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0002>;
 			opp-hz = /bits/ 64 <912000000>;
 		};
 
-		opp@912000000,925 {
+		opp-912000000-925 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0001>;
 			opp-hz = /bits/ 64 <912000000>;
 		};
 
-		opp@912000000,950 {
+		opp-912000000-950 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x02 0x0006>, <0x01 0x0004>,
 					   <0x04 0x0004>;
 			opp-hz = /bits/ 64 <912000000>;
 		};
 
-		opp@912000000,1000 {
+		opp-912000000-1000 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x01 0x0002>;
 			opp-hz = /bits/ 64 <912000000>;
 		};
 
-		opp@912000000,1050 {
+		opp-912000000-1050 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x03 0x0001>;
 			opp-hz = /bits/ 64 <912000000>;
 		};
 
-		opp@1000000000,875 {
+		opp-1000000000-875 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x08 0x0007>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000,900 {
+		opp-1000000000-900 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0002>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000,950 {
+		opp-1000000000-950 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0004>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000,975 {
+		opp-1000000000-975 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0001>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000,1000 {
+		opp-1000000000-1000 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x02 0x0006>, <0x01 0x0004>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000,1025 {
+		opp-1000000000-1025 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x01 0x0002>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000,1100 {
+		opp-1000000000-1100 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x03 0x0001>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1200000000,1000 {
+		opp-1200000000-1000 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x08 0x0004>;
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1200000000,1050 {
+		opp-1200000000-1050 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0004>;
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1200000000,1100 {
+		opp-1200000000-1100 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x02 0x0004>;
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1200000000,1125 {
+		opp-1200000000-1125 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x01 0x0004>;
 			opp-hz = /bits/ 64 <1200000000>;
diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/nvidia/tegra20-harmony.dts
index ae4312eedcbd..5c31a6c8dabe 100644
--- a/arch/arm/boot/dts/tegra20-harmony.dts
+++ b/arch/arm/boot/dts/nvidia/tegra20-harmony.dts
@@ -273,6 +273,8 @@
 	};
 
 	serial@70006300 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
@@ -339,7 +341,7 @@
 					regulator-always-on;
 				};
 
-				sm0 {
+				vdd_core: sm0 {
 					regulator-name = "vdd_sm0,vdd_core";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
@@ -565,6 +567,7 @@
 		nvidia,core-pwr-good-time = <3845 3845>;
 		nvidia,core-pwr-off-time = <3875>;
 		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
 	};
 
 	pcie@80003000 {
@@ -595,8 +598,6 @@
 
 	usb@c5004000 {
 		status = "okay";
-		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
-			GPIO_ACTIVE_LOW>;
 	};
 
 	usb-phy@c5004000 {
@@ -640,7 +641,7 @@
 		default-brightness-level = <6>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
@@ -649,7 +650,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			label = "Power";
 			gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
@@ -666,7 +667,7 @@
 		backlight = <&backlight>;
 	};
 
-	vdd_5v0_reg: regulator@0 {
+	vdd_5v0_reg: regulator-5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_5v0";
 		regulator-min-microvolt = <5000000>;
@@ -674,7 +675,7 @@
 		regulator-always-on;
 	};
 
-	regulator@1 {
+	regulator-1v5 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v5";
 		regulator-min-microvolt = <1500000>;
@@ -682,7 +683,7 @@
 		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
 	};
 
-	regulator@2 {
+	regulator-1v2 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v2";
 		regulator-min-microvolt = <1200000>;
@@ -691,7 +692,7 @@
 		enable-active-high;
 	};
 
-	pci_vdd_reg: regulator@3 {
+	pci_vdd_reg: regulator-1v05 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v05";
 		regulator-min-microvolt = <1050000>;
@@ -700,7 +701,7 @@
 		enable-active-high;
 	};
 
-	vdd_pnl_reg: regulator@4 {
+	vdd_pnl_reg: regulator-pn1 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_pnl";
 		regulator-min-microvolt = <2800000>;
@@ -709,7 +710,7 @@
 		enable-active-high;
 	};
 
-	vdd_bl_reg: regulator@5 {
+	vdd_bl_reg: regulator-bl {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_bl";
 		regulator-min-microvolt = <2800000>;
@@ -718,7 +719,7 @@
 		enable-active-high;
 	};
 
-	vdd_5v0_hdmi: regulator@6 {
+	vdd_5v0_hdmi: regulator-hdmi {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_HDMI";
 		regulator-min-microvolt = <5000000>;
diff --git a/arch/arm/boot/dts/tegra20-medcom-wide.dts b/arch/arm/boot/dts/nvidia/tegra20-medcom-wide.dts
index b31c9bca16e6..8c657182fff3 100644
--- a/arch/arm/boot/dts/tegra20-medcom-wide.dts
+++ b/arch/arm/boot/dts/nvidia/tegra20-medcom-wide.dts
@@ -15,10 +15,6 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	pwm@7000a000 {
-		status = "okay";
-	};
-
 	host1x@50000000 {
 		dc@54200000 {
 			rgb {
@@ -28,6 +24,10 @@
 		};
 	};
 
+	pwm@7000a000 {
+		status = "okay";
+	};
+
 	i2c@7000c000 {
 		wm8903: wm8903@1a {
 			compatible = "wlf,wm8903";
@@ -54,6 +54,9 @@
 
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
+
+		/* close enough */
+		power-supply = <&vdd_3v3_reg>;
 	};
 
 	panel: panel {
@@ -92,7 +95,7 @@
 		clock-names = "pll_a", "pll_a_out0", "mclk";
 	};
 
-	vcc_24v_reg: regulator@100 {
+	vcc_24v_reg: regulator-24v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_24v";
 		regulator-min-microvolt = <24000000>;
@@ -100,7 +103,7 @@
 		regulator-always-on;
 	};
 
-	vdd_5v0_reg: regulator@101 {
+	vdd_5v0_reg: regulator-5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_5v0";
 		vin-supply = <&vcc_24v_reg>;
@@ -109,7 +112,7 @@
 		regulator-always-on;
 	};
 
-	vdd_3v3_reg: regulator@102 {
+	vdd_3v3_reg: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_3v3";
 		vin-supply = <&vcc_24v_reg>;
@@ -118,7 +121,7 @@
 		regulator-always-on;
 	};
 
-	vdd_1v8_reg: regulator@103 {
+	vdd_1v8_reg: regulator-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v8";
 		vin-supply = <&vdd_3v3_reg>;
diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/nvidia/tegra20-paz00.dts
index acc816bfd233..1408e1e00759 100644
--- a/arch/arm/boot/dts/tegra20-paz00.dts
+++ b/arch/arm/boot/dts/nvidia/tegra20-paz00.dts
@@ -13,6 +13,8 @@
 	compatible = "compal,paz00", "nvidia,tegra20";
 
 	aliases {
+		mmc0 = &sdmmc4; /* eMMC */
+		mmc1 = &sdmmc1; /* MicroSD */
 		rtc0 = "/i2c@7000d000/tps6586x@34";
 		rtc1 = "/rtc@7000e000";
 		serial0 = &uarta;
@@ -264,15 +266,27 @@
 		};
 	};
 
+	spdif@70002400 {
+		status = "okay";
+
+		nvidia,fixed-parent-rate;
+	};
+
 	i2s@70002800 {
 		status = "okay";
+
+		nvidia,fixed-parent-rate;
 	};
 
 	serial@70006000 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
 	serial@70006200 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
@@ -297,67 +311,19 @@
 		clock-frequency = <100000>;
 	};
 
-	nvec@7000c500 {
+	i2c@7000c500 {
 		compatible = "nvidia,nvec";
-		reg = <0x7000c500 0x100>;
-		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
+
+		/delete-property/ #address-cells;
+		/delete-property/ #size-cells;
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
+
 		clock-frequency = <80000>;
 		request-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
 		slave-addr = <138>;
-		clocks = <&tegra_car TEGRA20_CLK_I2C3>,
-			 <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
-		clock-names = "div-clk", "fast-clk";
-		resets = <&tegra_car 67>;
-		reset-names = "i2c";
-	};
-
-	memory-controller@7000f400 {
-		nvidia,use-ram-code;
-
-		emc-tables@0 {
-			nvidia,ram-code = <0x0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			emc-table@166500 {
-				reg = <166500>;
-				compatible = "nvidia,tegra20-emc-table";
-				clock-frequency = <166500>;
-				nvidia,emc-registers = <0x0000000a 0x00000016
-					0x00000008 0x00000003 0x00000004 0x00000004
-					0x00000002 0x0000000c 0x00000003 0x00000003
-					0x00000002 0x00000001 0x00000004 0x00000005
-					0x00000004 0x00000009 0x0000000d 0x000004df
-					0x00000000 0x00000003 0x00000003 0x00000003
-					0x00000003 0x00000001 0x0000000a 0x000000c8
-					0x00000003 0x00000006 0x00000004 0x00000008
-					0x00000002 0x00000000 0x00000000 0x00000002
-					0x00000000 0x00000000 0x00000083 0xe03b0323
-					0x007fe010 0x00001414 0x00000000 0x00000000
-					0x00000000 0x00000000 0x00000000 0x00000000>;
-			};
 
-			emc-table@333000 {
-				reg = <333000>;
-				compatible = "nvidia,tegra20-emc-table";
-				clock-frequency = <333000>;
-				nvidia,emc-registers = <0x00000018 0x00000033
-					0x00000012 0x00000004 0x00000004 0x00000005
-					0x00000003 0x0000000c 0x00000006 0x00000006
-					0x00000003 0x00000001 0x00000004 0x00000005
-					0x00000004 0x00000009 0x0000000d 0x00000bff
-					0x00000000 0x00000003 0x00000003 0x00000006
-					0x00000006 0x00000001 0x00000011 0x000000c8
-					0x00000003 0x0000000e 0x00000007 0x00000008
-					0x00000002 0x00000000 0x00000000 0x00000002
-					0x00000000 0x00000000 0x00000083 0xf0440303
-					0x007fe010 0x00001414 0x00000000 0x00000000
-					0x00000000 0x00000000 0x00000000 0x00000000>;
-			};
-		};
+		status = "okay";
 	};
 
 	i2c@7000d000 {
@@ -519,6 +485,97 @@
 		nvidia,core-pwr-good-time = <3845 3845>;
 		nvidia,core-pwr-off-time = <0>;
 		nvidia,sys-clock-req-active-high;
+		core-supply = <&core_vdd_reg>;
+	};
+
+	memory-controller@7000f400 {
+		nvidia,use-ram-code;
+
+		emc-tables@0 {
+			nvidia,ram-code = <0x0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			emc-table@166500 {
+				reg = <166500>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <166500>;
+				nvidia,emc-registers = <0x0000000a 0x00000016
+					0x00000008 0x00000003 0x00000004 0x00000004
+					0x00000002 0x0000000c 0x00000003 0x00000003
+					0x00000002 0x00000001 0x00000004 0x00000005
+					0x00000004 0x00000009 0x0000000d 0x000004df
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000003 0x00000001 0x0000000a 0x000000c8
+					0x00000003 0x00000006 0x00000004 0x00000008
+					0x00000002 0x00000000 0x00000000 0x00000002
+					0x00000000 0x00000000 0x00000083 0xe03b0323
+					0x007fe010 0x00001414 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@333000 {
+				reg = <333000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <333000>;
+				nvidia,emc-registers = <0x00000018 0x00000033
+					0x00000012 0x00000004 0x00000004 0x00000005
+					0x00000003 0x0000000c 0x00000006 0x00000006
+					0x00000003 0x00000001 0x00000004 0x00000005
+					0x00000004 0x00000009 0x0000000d 0x00000bff
+					0x00000000 0x00000003 0x00000003 0x00000006
+					0x00000006 0x00000001 0x00000011 0x000000c8
+					0x00000003 0x0000000e 0x00000007 0x00000008
+					0x00000002 0x00000000 0x00000000 0x00000002
+					0x00000000 0x00000000 0x00000083 0xf0440303
+					0x007fe010 0x00001414 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+		};
+
+		emc-tables@1 {
+			nvidia,ram-code = <0x1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			emc-table@166500 {
+				reg = <166500>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <166500>;
+				nvidia,emc-registers = <0x0000000a 0x00000016
+					0x00000008 0x00000003 0x00000004 0x00000004
+					0x00000002 0x0000000c 0x00000003 0x00000003
+					0x00000002 0x00000001 0x00000004 0x00000005
+					0x00000004 0x00000009 0x0000000d 0x000004df
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000003 0x00000001 0x0000000a 0x000000c8
+					0x00000003 0x00000006 0x00000004 0x00000008
+					0x00000002 0x00000000 0x00000000 0x00000002
+					0x00000000 0x00000000 0x00000083 0xe03b0323
+					0x007fe010 0x00001414 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@333000 {
+				reg = <333000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <333000>;
+				nvidia,emc-registers = <0x00000018 0x00000033
+					0x00000012 0x00000004 0x00000004 0x00000005
+					0x00000003 0x0000000c 0x00000006 0x00000006
+					0x00000003 0x00000001 0x00000004 0x00000005
+					0x00000004 0x00000009 0x0000000d 0x00000bff
+					0x00000000 0x00000003 0x00000003 0x00000006
+					0x00000006 0x00000001 0x00000011 0x000000c8
+					0x00000003 0x0000000e 0x00000007 0x00000008
+					0x00000002 0x00000000 0x00000000 0x00000002
+					0x00000000 0x00000000 0x00000083 0xf0440303
+					0x007fe010 0x00001414 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+		};
 	};
 
 	usb@c5000000 {
@@ -533,8 +590,6 @@
 
 	usb@c5004000 {
 		status = "okay";
-		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
-			GPIO_ACTIVE_LOW>;
 	};
 
 	usb-phy@c5004000 {
@@ -551,7 +606,7 @@
 		status = "okay";
 	};
 
-	mmc@c8000000 {
+	sdmmc1: mmc@c8000000 {
 		status = "okay";
 		cd-gpios = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_LOW>;
 		wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
@@ -559,7 +614,7 @@
 		bus-width = <4>;
 	};
 
-	mmc@c8000600 {
+	sdmmc4: mmc@c8000600 {
 		status = "okay";
 		bus-width = <8>;
 		non-removable;
@@ -574,19 +629,34 @@
 		brightness-levels = <0 16 32 48 64 80 96 112 128 144 160 176 192 208 224 240 255>;
 		default-brightness-level = <10>;
 
-		backlight-boot-off;
+		/* close enough */
+		power-supply = <&vdd_pnl_reg>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
 	};
 
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&cpu_vdd_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			cpu-supply = <&cpu_vdd_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wakeup {
+		key-wakeup {
 			label = "Wakeup";
 			gpios = <&gpio TEGRA_GPIO(J, 7) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_WAKEUP>;
@@ -604,6 +674,10 @@
 		};
 	};
 
+	opp-table-emc {
+		/delete-node/ opp-760000000;
+	};
+
 	panel: panel {
 		compatible = "samsung,ltn101nt05";
 
@@ -614,7 +688,7 @@
 		backlight = <&backlight>;
 	};
 
-	p5valw_reg: regulator@0 {
+	p5valw_reg: regulator-5v0alw {
 		compatible = "regulator-fixed";
 		regulator-name = "+5valw";
 		regulator-min-microvolt = <5000000>;
@@ -622,7 +696,7 @@
 		regulator-always-on;
 	};
 
-	vdd_pnl_reg: regulator@1 {
+	vdd_pnl_reg: regulator-3v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "+3VS,vdd_pnl";
 		regulator-min-microvolt = <3300000>;
@@ -658,20 +732,6 @@
 		clock-names = "pll_a", "pll_a_out0", "mclk";
 	};
 
-	cpus {
-		cpu0: cpu@0 {
-			cpu-supply = <&cpu_vdd_reg>;
-			operating-points-v2 = <&cpu0_opp_table>;
-			#cooling-cells = <2>;
-		};
-
-		cpu1: cpu@1 {
-			cpu-supply = <&cpu_vdd_reg>;
-			operating-points-v2 = <&cpu0_opp_table>;
-			#cooling-cells = <2>;
-		};
-	};
-
 	thermal-zones {
 		cpu-thermal {
 			polling-delay-passive = <500>; /* milliseconds */
@@ -705,7 +765,3 @@
 		};
 	};
 };
-
-&emc_icc_dvfs_opp_table {
-	/delete-node/ opp@760000000;
-};
diff --git a/arch/arm/boot/dts/nvidia/tegra20-peripherals-opp.dtsi b/arch/arm/boot/dts/nvidia/tegra20-peripherals-opp.dtsi
new file mode 100644
index 000000000000..1b808233a933
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra20-peripherals-opp.dtsi
@@ -0,0 +1,1022 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	core_opp_table: opp-table-core {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		core_opp_950: opp-950000 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-level = <950000>;
+		};
+
+		core_opp_1000: opp-1000000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-level = <1000000>;
+		};
+
+		core_opp_1100: opp-1100000 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-level = <1100000>;
+		};
+
+		core_opp_1200: opp-1200000 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-level = <1200000>;
+		};
+
+		core_opp_1225: opp-1225000 {
+			opp-microvolt = <1225000 1225000 1300000>;
+			opp-level = <1225000>;
+		};
+
+		core_opp_1275: opp-1275000 {
+			opp-microvolt = <1275000 1275000 1300000>;
+			opp-level = <1275000>;
+		};
+
+		core_opp_1300: opp-1300000 {
+			opp-microvolt = <1300000 1300000 1300000>;
+			opp-level = <1300000>;
+		};
+	};
+
+	emc_icc_dvfs_opp_table: opp-table-emc {
+		compatible = "operating-points-v2";
+
+		opp-36000000 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <36000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-47500000 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <47500000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-50000000 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <50000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-54000000 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <54000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-57000000 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <57000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-100000000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <100000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-108000000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <108000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-126666000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <126666000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-150000000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <150000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-190000000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <190000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-216000000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <216000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+			opp-suspend;
+		};
+
+		opp-300000000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-333000000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <333000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-380000000 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <380000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-600000000 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-666000000 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <666000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-760000000 {
+			opp-microvolt = <1300000 1300000 1300000>;
+			opp-hz = /bits/ 64 <760000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1300>;
+		};
+	};
+
+	host1x_dvfs_opp_table: opp-table-host1x {
+		compatible = "operating-points-v2";
+
+		opp-104500000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <104500000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-133000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <133000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-166000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <166000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
+		};
+	};
+
+	mpe_dvfs_opp_table: opp-table-mpe {
+		compatible = "operating-points-v2";
+
+		opp-104500000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <104500000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-142500000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <142500000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-152000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <152000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-190000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <190000000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-190000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <190000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-228000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <228000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-228000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <228000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-237500000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <237500000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-266000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <266000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-275500000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <275500000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-300000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-300000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x000C>;
+			required-opps = <&core_opp_1100>;
+		};
+	};
+
+	vi_dvfs_opp_table: opp-table-vi {
+		compatible = "operating-points-v2";
+
+		opp-85000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <85000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-100000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <100000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-150000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <150000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
+		};
+	};
+
+	epp_dvfs_opp_table: opp-table-epp {
+		compatible = "operating-points-v2";
+
+		opp-133000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <133000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-171000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <171000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-247000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <247000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-300000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	gr2d_dvfs_opp_table: opp-table-gr2d {
+		compatible = "operating-points-v2";
+
+		opp-133000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <133000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-171000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <171000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-247000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <247000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-300000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	gr3d_dvfs_opp_table: opp-table-gr3d {
+		compatible = "operating-points-v2";
+
+		opp-114000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <114000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-161500000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <161500000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-161500000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <161500000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-209000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <209000000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-218500000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <218500000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-247000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <247000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-247000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <247000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-256500000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <256500000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-285000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <285000000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-285000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <285000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-304000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <304000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-323000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <323000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-333500000-1275 {
+			opp-microvolt = <1275000 1275000 1300000>;
+			opp-hz = /bits/ 64 <333500000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1275>;
+		};
+
+		opp-333500000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <333500000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-351500000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <351500000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-361000000-1275 {
+			opp-microvolt = <1275000 1275000 1300000>;
+			opp-hz = /bits/ 64 <361000000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1275>;
+		};
+
+		opp-380000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <380000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-400000000-1275 {
+			opp-microvolt = <1275000 1275000 1300000>;
+			opp-hz = /bits/ 64 <400000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1275>;
+		};
+
+		opp-400000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <400000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	disp1_dvfs_opp_table: opp-table-disp1 {
+		compatible = "operating-points-v2";
+
+		opp-158000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <158000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-190000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <190000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
+		};
+	};
+
+	disp2_dvfs_opp_table: opp-table-disp2 {
+		compatible = "operating-points-v2";
+
+		opp-158000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <158000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-190000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <190000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
+		};
+	};
+
+	dsi_dvfs_opp_table: opp-table-dsi {
+		compatible = "operating-points-v2";
+
+		opp-100000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <100000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-500000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <500000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	hdmi_dvfs_opp_table: opp-table-hdmi {
+		compatible = "operating-points-v2";
+
+		opp-148500000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <148500000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	tvo_dvfs_opp_table: opp-table-tvo {
+		compatible = "operating-points-v2";
+
+		opp-250000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <250000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	sclk_dvfs_opp_table: opp-table-sclk {
+		compatible = "operating-points-v2";
+
+		opp-95000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <95000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-123500000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <123500000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-133000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <133000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-152000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <152000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-159500000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <159500000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-171000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <171000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-180500000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <180500000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-190000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <190000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-207000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <207000000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-218500000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <218500000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-222500000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <222500000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-229500000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <229500000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-240000000-1225 {
+			opp-microvolt = <1225000 1225000 1300000>;
+			opp-hz = /bits/ 64 <240000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1225>;
+		};
+
+		opp-240000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <240000000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-247000000-1275 {
+			opp-microvolt = <1275000 1275000 1300000>;
+			opp-hz = /bits/ 64 <247000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1275>;
+		};
+
+		opp-256500000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <256500000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-260000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <260000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-262000000-1300 {
+			opp-microvolt = <1300000 1300000 1300000>;
+			opp-hz = /bits/ 64 <262000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1300>;
+		};
+
+		opp-264000000-1275 {
+			opp-microvolt = <1275000 1275000 1300000>;
+			opp-hz = /bits/ 64 <264000000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1275>;
+		};
+
+		opp-277500000-1300 {
+			opp-microvolt = <1300000 1300000 1300000>;
+			opp-hz = /bits/ 64 <277500000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1300>;
+		};
+
+		opp-285000000-1275 {
+			opp-microvolt = <1275000 1275000 1300000>;
+			opp-hz = /bits/ 64 <285000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1275>;
+		};
+
+		opp-292500000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <292500000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-300000000-1300 {
+			opp-microvolt = <1300000 1300000 1300000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1300>;
+		};
+
+		opp-300000000-1275 {
+			opp-microvolt = <1275000 1275000 1300000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1275>;
+		};
+	};
+
+	vde_dvfs_opp_table: opp-table-vde {
+		compatible = "operating-points-v2";
+
+		opp-95000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <95000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-123500000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <123500000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-123500000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <123500000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-152000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <152000000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-152000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <152000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-171000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <171000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-209000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <209000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-209000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <209000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-218500000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <218500000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-237500000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <237500000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-275500000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <275500000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-285000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <285000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-300000000-1275 {
+			opp-microvolt = <1275000 1275000 1300000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1275>;
+		};
+
+		opp-300000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-300000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1100>;
+		};
+	};
+
+	ndflash_dvfs_opp_table: opp-table-ndflash {
+		compatible = "operating-points-v2";
+
+		opp-130000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <130000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-150000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <150000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-158000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <158000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-164000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <164000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	nor_dvfs_opp_table: opp-table-nor {
+		compatible = "operating-points-v2";
+
+		opp-92000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <92000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	sdmmc1_dvfs_opp_table: opp-table-sdmmc1 {
+		compatible = "operating-points-v2";
+
+		opp-44000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <44000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-52000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <52000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	sdmmc2_dvfs_opp_table: opp-table-sdmmc2 {
+		compatible = "operating-points-v2";
+
+		opp-44000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <44000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-52000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <52000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	sdmmc3_dvfs_opp_table: opp-table-sdmmc3 {
+		compatible = "operating-points-v2";
+
+		opp-44000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <44000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-52000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <52000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	sdmmc4_dvfs_opp_table: opp-table-sdmmc4 {
+		compatible = "operating-points-v2";
+
+		opp-44000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <44000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-52000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <52000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	pcie_dvfs_opp_table: opp-table-pcie {
+		compatible = "operating-points-v2";
+
+		opp-250000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <250000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	usbd_dvfs_opp_table: opp-table-usbd {
+		compatible = "operating-points-v2";
+
+		opp-480000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <480000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
+		};
+	};
+
+	usb2_dvfs_opp_table: opp-table-usb2 {
+		compatible = "operating-points-v2";
+
+		opp-480000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <480000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
+		};
+	};
+
+	usb3_dvfs_opp_table: opp-table-usb3 {
+		compatible = "operating-points-v2";
+
+		opp-480000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <480000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra20-plutux.dts b/arch/arm/boot/dts/nvidia/tegra20-plutux.dts
index 5811b7006a9b..71a8236491df 100644
--- a/arch/arm/boot/dts/tegra20-plutux.dts
+++ b/arch/arm/boot/dts/nvidia/tegra20-plutux.dts
@@ -60,7 +60,7 @@
 		clock-names = "pll_a", "pll_a_out0", "mclk";
 	};
 
-	vcc_24v_reg: regulator@100 {
+	vcc_24v_reg: regulator-24v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_24v";
 		regulator-min-microvolt = <24000000>;
@@ -68,7 +68,7 @@
 		regulator-always-on;
 	};
 
-	vdd_5v0_reg: regulator@101 {
+	vdd_5v0_reg: regulator-5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_5v0";
 		vin-supply = <&vcc_24v_reg>;
@@ -77,7 +77,7 @@
 		regulator-always-on;
 	};
 
-	vdd_3v3_reg: regulator@102 {
+	vdd_3v3_reg: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_3v3";
 		vin-supply = <&vcc_24v_reg>;
@@ -86,7 +86,7 @@
 		regulator-always-on;
 	};
 
-	vdd_1v8_reg: regulator@103 {
+	vdd_1v8_reg: regulator-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v8";
 		vin-supply = <&vdd_3v3_reg>;
diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/nvidia/tegra20-seaboard.dts
index 92d494b8c3d2..e944ae9b86c2 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/nvidia/tegra20-seaboard.dts
@@ -285,7 +285,7 @@
 			};
 		};
 
-		state_i2cmux_ddc: pinmux_i2cmux_ddc {
+		state_i2cmux_ddc: pinmux-i2cmux-ddc {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "i2c2";
@@ -296,25 +296,25 @@
 			};
 		};
 
-		state_i2cmux_pta: pinmux_i2cmux_pta {
+		state_i2cmux_idle: pinmux-i2cmux-idle {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "rsvd4";
 			};
 			pta {
 				nvidia,pins = "pta";
-				nvidia,function = "i2c2";
+				nvidia,function = "rsvd4";
 			};
 		};
 
-		state_i2cmux_idle: pinmux_i2cmux_idle {
+		state_i2cmux_pta: pinmux-i2cmux-pta {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "rsvd4";
 			};
 			pta {
 				nvidia,pins = "pta";
-				nvidia,function = "rsvd4";
+				nvidia,function = "i2c2";
 			};
 		};
 	};
@@ -324,6 +324,8 @@
 	};
 
 	serial@70006300 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
@@ -358,7 +360,7 @@
 		};
 
 		gyrometer@68 {
-			compatible = "invn,mpu3050";
+			compatible = "invensense,mpu3050";
 			reg = <0x68>;
 			interrupt-parent = <&gpio>;
 			interrupts = <TEGRA_GPIO(Z, 4) IRQ_TYPE_LEVEL_HIGH>;
@@ -370,38 +372,6 @@
 		clock-frequency = <100000>;
 	};
 
-	i2cmux {
-		compatible = "i2c-mux-pinctrl";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c-parent = <&{/i2c@7000c400}>;
-
-		pinctrl-names = "ddc", "pta", "idle";
-		pinctrl-0 = <&state_i2cmux_ddc>;
-		pinctrl-1 = <&state_i2cmux_pta>;
-		pinctrl-2 = <&state_i2cmux_idle>;
-
-		hdmi_ddc: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		lvds_ddc: i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			smart-battery@b {
-				compatible = "ti,bq20z75", "sbs,sbs-battery";
-				reg = <0xb>;
-				sbs,i2c-retry-count = <2>;
-				sbs,poll-retry-count = <10>;
-			};
-		};
-	};
-
 	i2c@7000c500 {
 		status = "okay";
 		clock-frequency = <400000>;
@@ -444,7 +414,7 @@
 					regulator-always-on;
 				};
 
-				sm0 {
+				vdd_core: sm0 {
 					regulator-name = "vdd_sm0,vdd_core";
 					regulator-min-microvolt = <1300000>;
 					regulator-max-microvolt = <1300000>;
@@ -689,6 +659,7 @@
 		nvidia,core-pwr-good-time = <3845 3845>;
 		nvidia,core-pwr-off-time = <3875>;
 		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
 	};
 
 	memory-controller@7000f400 {
@@ -742,8 +713,6 @@
 
 	usb@c5004000 {
 		status = "okay";
-		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
-			GPIO_ACTIVE_LOW>;
 	};
 
 	usb-phy@c5004000 {
@@ -792,7 +761,7 @@
 		default-brightness-level = <6>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
@@ -801,14 +770,14 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			label = "Power";
 			gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			wakeup-source;
 		};
 
-		lid {
+		switch-lid {
 			label = "Lid";
 			gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_HIGH>;
 			linux,input-type = <5>; /* EV_SW */
@@ -818,6 +787,38 @@
 		};
 	};
 
+	i2cmux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&{/i2c@7000c400}>;
+
+		pinctrl-names = "ddc", "pta", "idle";
+		pinctrl-0 = <&state_i2cmux_ddc>;
+		pinctrl-1 = <&state_i2cmux_pta>;
+		pinctrl-2 = <&state_i2cmux_idle>;
+
+		hdmi_ddc: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		lvds_ddc: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smart-battery@b {
+				compatible = "ti,bq20z75", "sbs,sbs-battery";
+				reg = <0xb>;
+				sbs,i2c-retry-count = <2>;
+				sbs,poll-retry-count = <10>;
+			};
+		};
+	};
+
 	panel: panel {
 		compatible = "chunghwa,claa101wa01a";
 
@@ -828,7 +829,7 @@
 		ddc-i2c-bus = <&lvds_ddc>;
 	};
 
-	vdd_5v0_reg: regulator@0 {
+	vdd_5v0_reg: regulator-5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_5v0";
 		regulator-min-microvolt = <5000000>;
@@ -836,7 +837,7 @@
 		regulator-always-on;
 	};
 
-	regulator@1 {
+	regulator-1v5 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v5";
 		regulator-min-microvolt = <1500000>;
@@ -844,7 +845,7 @@
 		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
 	};
 
-	regulator@2 {
+	regulator-1v2 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v2";
 		regulator-min-microvolt = <1200000>;
@@ -853,7 +854,7 @@
 		enable-active-high;
 	};
 
-	vbus_reg: regulator@3 {
+	vbus_reg: regulator-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_vbus_wup1";
 		regulator-min-microvolt = <5000000>;
@@ -864,7 +865,7 @@
 		regulator-boot-on;
 	};
 
-	vdd_pnl_reg: regulator@4 {
+	vdd_pnl_reg: regulator-pnl {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_pnl";
 		regulator-min-microvolt = <2800000>;
@@ -873,7 +874,7 @@
 		enable-active-high;
 	};
 
-	vdd_bl_reg: regulator@5 {
+	vdd_bl_reg: regulator-bl {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_bl";
 		regulator-min-microvolt = <2800000>;
@@ -882,7 +883,7 @@
 		enable-active-high;
 	};
 
-	vdd_hdmi: regulator@6 {
+	vdd_hdmi: regulator-hdmi {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_HDMI";
 		regulator-min-microvolt = <5000000>;
diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/nvidia/tegra20-tamonten.dtsi
index dd4d506683de..5c214dd060bb 100644
--- a/arch/arm/boot/dts/tegra20-tamonten.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra20-tamonten.dtsi
@@ -183,8 +183,8 @@
 			};
 			conf_ata {
 				nvidia,pins = "ata", "atb", "atc", "atd", "ate",
-					"cdev1", "cdev2", "dap1", "dtb", "gma",
-					"gmb", "gmc", "gmd", "gme", "gpu7",
+					"cdev1", "cdev2", "dap1", "dtb", "dtf",
+					"gma", "gmb", "gmc", "gmd", "gme", "gpu7",
 					"gpv", "i2cp", "irrx", "irtx", "pta",
 					"rm", "slxa", "slxk", "spia", "spib",
 					"uac";
@@ -203,7 +203,7 @@
 			};
 			conf_crtp {
 				nvidia,pins = "crtp", "dap2", "dap3", "dap4",
-					"dtc", "dte", "dtf", "gpu", "sdio1",
+					"dtc", "dte", "gpu", "sdio1",
 					"slxc", "slxd", "spdi", "spdo", "spig",
 					"uda";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -249,7 +249,7 @@
 			};
 		};
 
-		state_i2cmux_ddc: pinmux_i2cmux_ddc {
+		state_i2cmux_ddc: pinmux-i2cmux-ddc {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "i2c2";
@@ -260,25 +260,25 @@
 			};
 		};
 
-		state_i2cmux_pta: pinmux_i2cmux_pta {
+		state_i2cmux_idle: pinmux-i2cmux-idle {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "rsvd4";
 			};
 			pta {
 				nvidia,pins = "pta";
-				nvidia,function = "i2c2";
+				nvidia,function = "rsvd4";
 			};
 		};
 
-		state_i2cmux_idle: pinmux_i2cmux_idle {
+		state_i2cmux_pta: pinmux-i2cmux-pta {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "rsvd4";
 			};
 			pta {
 				nvidia,pins = "pta";
-				nvidia,function = "rsvd4";
+				nvidia,function = "i2c2";
 			};
 		};
 	};
@@ -288,6 +288,8 @@
 	};
 
 	serial@70006300 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
@@ -301,31 +303,6 @@
 		status = "okay";
 	};
 
-	i2cmux {
-		compatible = "i2c-mux-pinctrl";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c-parent = <&{/i2c@7000c400}>;
-
-		pinctrl-names = "ddc", "pta", "idle";
-		pinctrl-0 = <&state_i2cmux_ddc>;
-		pinctrl-1 = <&state_i2cmux_pta>;
-		pinctrl-2 = <&state_i2cmux_idle>;
-
-		hdmi_ddc: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-
 	i2c@7000d000 {
 		clock-frequency = <400000>;
 		status = "okay";
@@ -357,7 +334,7 @@
 					regulator-always-on;
 				};
 
-				sm0 {
+				vdd_core: sm0 {
 					regulator-name = "vdd_sys_sm0,vdd_core";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
@@ -477,6 +454,7 @@
 		nvidia,core-pwr-good-time = <3845 3845>;
 		nvidia,core-pwr-off-time = <3875>;
 		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
 	};
 
 	pcie@80003000 {
@@ -502,13 +480,38 @@
 		status = "okay";
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
 	};
 
-	pci_vdd_reg: regulator@1 {
+	i2cmux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&{/i2c@7000c400}>;
+
+		pinctrl-names = "ddc", "pta", "idle";
+		pinctrl-0 = <&state_i2cmux_ddc>;
+		pinctrl-1 = <&state_i2cmux_pta>;
+		pinctrl-2 = <&state_i2cmux_idle>;
+
+		hdmi_ddc: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	pci_vdd_reg: regulator-1v05 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v05";
 		regulator-min-microvolt = <1050000>;
diff --git a/arch/arm/boot/dts/tegra20-tec.dts b/arch/arm/boot/dts/nvidia/tegra20-tec.dts
index 10ff09d86efa..4f41c74384b2 100644
--- a/arch/arm/boot/dts/tegra20-tec.dts
+++ b/arch/arm/boot/dts/nvidia/tegra20-tec.dts
@@ -69,7 +69,7 @@
 		clock-names = "pll_a", "pll_a_out0", "mclk";
 	};
 
-	vcc_24v_reg: regulator@100 {
+	vcc_24v_reg: regulator-24v {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_24v";
 		regulator-min-microvolt = <24000000>;
@@ -77,7 +77,7 @@
 		regulator-always-on;
 	};
 
-	vdd_5v0_reg: regulator@101 {
+	vdd_5v0_reg: regulator-5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_5v0";
 		vin-supply = <&vcc_24v_reg>;
@@ -86,7 +86,7 @@
 		regulator-always-on;
 	};
 
-	vdd_3v3_reg: regulator@102 {
+	vdd_3v3_reg: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_3v3";
 		vin-supply = <&vcc_24v_reg>;
@@ -95,7 +95,7 @@
 		regulator-always-on;
 	};
 
-	vdd_1v8_reg: regulator@103 {
+	vdd_1v8_reg: regulator-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v8";
 		vin-supply = <&vdd_3v3_reg>;
diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/nvidia/tegra20-trimslice.dts
index 4bc87bc0c2a4..4caeeb9f1e1d 100644
--- a/arch/arm/boot/dts/tegra20-trimslice.dts
+++ b/arch/arm/boot/dts/nvidia/tegra20-trimslice.dts
@@ -2,6 +2,7 @@
 /dts-v1/;
 
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 #include "tegra20.dtsi"
 #include "tegra20-cpu-opp.dtsi"
 
@@ -201,16 +202,17 @@
 			conf_ata {
 				nvidia,pins = "ata", "atc", "atd", "ate",
 					"crtp", "dap2", "dap3", "dap4", "dta",
-					"dtb", "dtc", "dtd", "dte", "gmb",
-					"gme", "i2cp", "pta", "slxc", "slxd",
-					"spdi", "spdo", "uda";
+					"dtb", "dtc", "dtd", "gmb", "gme",
+					"i2cp", "pta", "slxc", "slxd", "spdi",
+					"spdo", "uda";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 			};
 			conf_atb {
 				nvidia,pins = "atb", "cdev1", "cdev2", "dap1",
-					"gma", "gmc", "gmd", "gpu", "gpu7",
-					"gpv", "sdio1", "slxa", "slxk", "uac";
+					"dte", "gma", "gmc", "gmd", "gpu",
+					"gpu7", "gpv", "sdio1", "slxa", "slxk",
+					"uac";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
@@ -276,6 +278,8 @@
 	};
 
 	serial@70006000 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
@@ -287,7 +291,8 @@
 	spi@7000c380 {
 		status = "okay";
 		spi-max-frequency = <48000000>;
-		spi-flash@0 {
+
+		flash@0 {
 			compatible = "winbond,w25q80bl", "jedec,spi-nor";
 			reg = <0>;
 			spi-max-frequency = <48000000>;
@@ -321,6 +326,7 @@
 		nvidia,core-pwr-good-time = <3845 3845>;
 		nvidia,core-pwr-off-time = <3875>;
 		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
 	};
 
 	pcie@80003000 {
@@ -348,8 +354,6 @@
 
 	usb@c5004000 {
 		status = "okay";
-		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
-			GPIO_ACTIVE_LOW>;
 	};
 
 	usb-phy@c5004000 {
@@ -379,16 +383,26 @@
 		bus-width = <4>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
 	};
 
+	cpus {
+		cpu0: cpu@0 {
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu@1 {
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			label = "Power";
 			gpios = <&gpio TEGRA_GPIO(X, 6) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
@@ -396,12 +410,30 @@
 		};
 	};
 
+	leds {
+		compatible = "gpio-leds";
+
+		led-ds2 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <2>;
+			gpios = <&gpio TEGRA_GPIO(D, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		led-ds3 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <3>;
+			gpios = <&gpio TEGRA_GPIO(BB, 5) GPIO_ACTIVE_LOW>;
+		};
+	};
+
 	poweroff {
 		compatible = "gpio-poweroff";
 		gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
 	};
 
-	hdmi_vdd_reg: regulator@0 {
+	hdmi_vdd_reg: regulator-hdmi {
 		compatible = "regulator-fixed";
 		regulator-name = "avdd_hdmi";
 		regulator-min-microvolt = <3300000>;
@@ -409,7 +441,7 @@
 		regulator-always-on;
 	};
 
-	hdmi_pll_reg: regulator@1 {
+	hdmi_pll_reg: regulator-hdmipll {
 		compatible = "regulator-fixed";
 		regulator-name = "avdd_hdmi_pll";
 		regulator-min-microvolt = <1800000>;
@@ -417,7 +449,7 @@
 		regulator-always-on;
 	};
 
-	vbus_reg: regulator@2 {
+	vbus_reg: regulator-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb1_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -428,7 +460,7 @@
 		regulator-boot-on;
 	};
 
-	pci_clk_reg: regulator@3 {
+	pci_clk_reg: regulator-pciclk {
 		compatible = "regulator-fixed";
 		regulator-name = "pci_clk";
 		regulator-min-microvolt = <3300000>;
@@ -436,7 +468,7 @@
 		regulator-always-on;
 	};
 
-	pci_vdd_reg: regulator@4 {
+	pci_vdd_reg: regulator-pcivdd {
 		compatible = "regulator-fixed";
 		regulator-name = "pci_vdd";
 		regulator-min-microvolt = <1050000>;
@@ -444,6 +476,14 @@
 		regulator-always-on;
 	};
 
+	vdd_core: regulator-core {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_core";
+		regulator-min-microvolt = <1300000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-always-on;
+	};
+
 	sound {
 		compatible = "nvidia,tegra-audio-trimslice";
 		nvidia,i2s-controller = <&tegra_i2s1>;
@@ -454,14 +494,4 @@
 			 <&tegra_car TEGRA20_CLK_CDEV1>;
 		clock-names = "pll_a", "pll_a_out0", "mclk";
 	};
-
-	cpus {
-		cpu0: cpu@0 {
-			operating-points-v2 = <&cpu0_opp_table>;
-		};
-
-		cpu@1 {
-			operating-points-v2 = <&cpu0_opp_table>;
-		};
-	};
 };
diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/nvidia/tegra20-ventana.dts
index 5a2578b3707f..f3273941437c 100644
--- a/arch/arm/boot/dts/tegra20-ventana.dts
+++ b/arch/arm/boot/dts/nvidia/tegra20-ventana.dts
@@ -284,7 +284,7 @@
 			};
 		};
 
-		state_i2cmux_ddc: pinmux_i2cmux_ddc {
+		state_i2cmux_ddc: pinmux-i2cmux-ddc {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "i2c2";
@@ -295,25 +295,25 @@
 			};
 		};
 
-		state_i2cmux_pta: pinmux_i2cmux_pta {
+		state_i2cmux_idle: pinmux-i2cmux-idle {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "rsvd4";
 			};
 			pta {
 				nvidia,pins = "pta";
-				nvidia,function = "i2c2";
+				nvidia,function = "rsvd4";
 			};
 		};
 
-		state_i2cmux_idle: pinmux_i2cmux_idle {
+		state_i2cmux_pta: pinmux-i2cmux-pta {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "rsvd4";
 			};
 			pta {
 				nvidia,pins = "pta";
-				nvidia,function = "rsvd4";
+				nvidia,function = "i2c2";
 			};
 		};
 	};
@@ -323,6 +323,8 @@
 	};
 
 	serial@70006300 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
@@ -362,31 +364,6 @@
 		clock-frequency = <100000>;
 	};
 
-	i2cmux {
-		compatible = "i2c-mux-pinctrl";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c-parent = <&{/i2c@7000c400}>;
-
-		pinctrl-names = "ddc", "pta", "idle";
-		pinctrl-0 = <&state_i2cmux_ddc>;
-		pinctrl-1 = <&state_i2cmux_pta>;
-		pinctrl-2 = <&state_i2cmux_idle>;
-
-		hdmi_ddc: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		lvds_ddc: i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-
 	i2c@7000c500 {
 		status = "okay";
 		clock-frequency = <400000>;
@@ -544,6 +521,7 @@
 		nvidia,core-pwr-good-time = <3845 3845>;
 		nvidia,core-pwr-off-time = <458>;
 		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
 	};
 
 	usb@c5000000 {
@@ -556,8 +534,6 @@
 
 	usb@c5004000 {
 		status = "okay";
-		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
-			GPIO_ACTIVE_LOW>;
 	};
 
 	usb-phy@c5004000 {
@@ -606,7 +582,7 @@
 		default-brightness-level = <6>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
@@ -629,7 +605,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			label = "Power";
 			gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
@@ -637,6 +613,31 @@
 		};
 	};
 
+	i2cmux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&{/i2c@7000c400}>;
+
+		pinctrl-names = "ddc", "pta", "idle";
+		pinctrl-0 = <&state_i2cmux_ddc>;
+		pinctrl-1 = <&state_i2cmux_pta>;
+		pinctrl-2 = <&state_i2cmux_idle>;
+
+		hdmi_ddc: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		lvds_ddc: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
 	panel: panel {
 		compatible = "chunghwa,claa101wa01a";
 
@@ -647,7 +648,7 @@
 		ddc-i2c-bus = <&lvds_ddc>;
 	};
 
-	vdd_5v0_reg: regulator@0 {
+	vdd_5v0_reg: regulator-5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_5v0";
 		regulator-min-microvolt = <5000000>;
@@ -655,7 +656,7 @@
 		regulator-always-on;
 	};
 
-	regulator@1 {
+	regulator-1v5 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v5";
 		regulator-min-microvolt = <1500000>;
@@ -663,7 +664,7 @@
 		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
 	};
 
-	regulator@2 {
+	regulator-1v2 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v2";
 		regulator-min-microvolt = <1200000>;
@@ -672,7 +673,7 @@
 		enable-active-high;
 	};
 
-	vdd_pnl_reg: regulator@3 {
+	vdd_pnl_reg: regulator-pnl {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_pnl";
 		regulator-min-microvolt = <2800000>;
@@ -681,7 +682,7 @@
 		enable-active-high;
 	};
 
-	vdd_bl_reg: regulator@4 {
+	vdd_bl_reg: regulator-bl {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_bl";
 		regulator-min-microvolt = <2800000>;
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/nvidia/tegra20.dtsi
index 6ce498178105..c60fc1971188 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra20.dtsi
@@ -40,8 +40,10 @@
 		interrupt-names = "syncpt", "host1x";
 		clocks = <&tegra_car TEGRA20_CLK_HOST1X>;
 		clock-names = "host1x";
-		resets = <&tegra_car 28>;
-		reset-names = "host1x";
+		resets = <&tegra_car 28>, <&mc TEGRA20_MC_RESET_HC>;
+		reset-names = "host1x", "mc";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&host1x_dvfs_opp_table>;
 
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -55,15 +57,38 @@
 			clocks = <&tegra_car TEGRA20_CLK_MPE>;
 			resets = <&tegra_car 60>;
 			reset-names = "mpe";
+			power-domains = <&pd_mpe>;
+			operating-points-v2 = <&mpe_dvfs_opp_table>;
+			status = "disabled";
 		};
 
 		vi@54080000 {
 			compatible = "nvidia,tegra20-vi";
-			reg = <0x54080000 0x00040000>;
+			reg = <0x54080000 0x00000800>;
 			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&tegra_car TEGRA20_CLK_VI>;
 			resets = <&tegra_car 20>;
 			reset-names = "vi";
+			power-domains = <&pd_venc>;
+			operating-points-v2 = <&vi_dvfs_opp_table>;
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0x0 0x54080000 0x4000>;
+
+			csi: csi@800 {
+				compatible = "nvidia,tegra20-csi";
+				reg = <0x800 0x200>;
+				clocks = <&tegra_car TEGRA20_CLK_CSI>;
+				power-domains = <&pd_venc>;
+				#nvidia,mipi-calibrate-cells = <1>;
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
 		};
 
 		epp@540c0000 {
@@ -73,6 +98,9 @@
 			clocks = <&tegra_car TEGRA20_CLK_EPP>;
 			resets = <&tegra_car 19>;
 			reset-names = "epp";
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&epp_dvfs_opp_table>;
+			status = "disabled";
 		};
 
 		isp@54100000 {
@@ -82,6 +110,8 @@
 			clocks = <&tegra_car TEGRA20_CLK_ISP>;
 			resets = <&tegra_car 23>;
 			reset-names = "isp";
+			power-domains = <&pd_venc>;
+			status = "disabled";
 		};
 
 		gr2d@54140000 {
@@ -89,16 +119,20 @@
 			reg = <0x54140000 0x00040000>;
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&tegra_car TEGRA20_CLK_GR2D>;
-			resets = <&tegra_car 21>;
-			reset-names = "2d";
+			resets = <&tegra_car 21>, <&mc TEGRA20_MC_RESET_2D>;
+			reset-names = "2d", "mc";
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&gr2d_dvfs_opp_table>;
 		};
 
 		gr3d@54180000 {
 			compatible = "nvidia,tegra20-gr3d";
 			reg = <0x54180000 0x00040000>;
 			clocks = <&tegra_car TEGRA20_CLK_GR3D>;
-			resets = <&tegra_car 24>;
-			reset-names = "3d";
+			resets = <&tegra_car 24>, <&mc TEGRA20_MC_RESET_3D>;
+			reset-names = "3d", "mc";
+			power-domains = <&pd_3d>;
+			operating-points-v2 = <&gr3d_dvfs_opp_table>;
 		};
 
 		dc@54200000 {
@@ -110,6 +144,8 @@
 			clock-names = "dc", "parent";
 			resets = <&tegra_car 27>;
 			reset-names = "dc";
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&disp1_dvfs_opp_table>;
 
 			nvidia,head = <0>;
 
@@ -138,6 +174,8 @@
 			clock-names = "dc", "parent";
 			resets = <&tegra_car 26>;
 			reset-names = "dc";
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&disp2_dvfs_opp_table>;
 
 			nvidia,head = <1>;
 
@@ -157,7 +195,7 @@
 			};
 		};
 
-		hdmi@54280000 {
+		tegra_hdmi: hdmi@54280000 {
 			compatible = "nvidia,tegra20-hdmi";
 			reg = <0x54280000 0x00040000>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
@@ -166,6 +204,9 @@
 			clock-names = "hdmi", "parent";
 			resets = <&tegra_car 51>;
 			reset-names = "hdmi";
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&hdmi_dvfs_opp_table>;
+			#sound-dai-cells = <0>;
 			status = "disabled";
 		};
 
@@ -174,6 +215,8 @@
 			reg = <0x542c0000 0x00040000>;
 			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&tegra_car TEGRA20_CLK_TVO>;
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&tvo_dvfs_opp_table>;
 			status = "disabled";
 		};
 
@@ -185,6 +228,8 @@
 			clock-names = "dsi", "parent";
 			resets = <&tegra_car 48>;
 			reset-names = "dsi";
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&dsi_dvfs_opp_table>;
 			status = "disabled";
 		};
 	};
@@ -242,6 +287,13 @@
 		reg = <0x60006000 0x1000>;
 		#clock-cells = <1>;
 		#reset-cells = <1>;
+
+		sclk {
+			compatible = "nvidia,tegra20-sclk";
+			clocks = <&tegra_car TEGRA20_CLK_SCLK>;
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&sclk_dvfs_opp_table>;
+		};
 	};
 
 	flow-controller@60007000 {
@@ -249,7 +301,7 @@
 		reg = <0x60007000 0x1000>;
 	};
 
-	apbdma: dma@6000a000 {
+	apbdma: dma-controller@6000a000 {
 		compatible = "nvidia,tegra20-apbdma";
 		reg = <0x6000a000 0x1200>;
 		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
@@ -293,9 +345,7 @@
 		gpio-controller;
 		#interrupt-cells = <2>;
 		interrupt-controller;
-		/*
 		gpio-ranges = <&pinmux 0 0 224>;
-		*/
 	};
 
 	vde@6001a000 {
@@ -319,12 +369,8 @@
 		clocks = <&tegra_car TEGRA20_CLK_VDE>;
 		reset-names = "vde", "mc";
 		resets = <&tegra_car 61>, <&mc TEGRA20_MC_RESET_VDE>;
-	};
-
-	apbmisc@70000800 {
-		compatible = "nvidia,tegra20-apbmisc";
-		reg = <0x70000800 0x64>, /* Chip revision */
-		      <0x70000008 0x04>; /* Strapping options */
+		power-domains = <&pd_vde>;
+		operating-points-v2 = <&vde_dvfs_opp_table>;
 	};
 
 	pinmux: pinmux@70000014 {
@@ -335,6 +381,12 @@
 		      <0x70000868 0xa8>; /* Pad control registers */
 	};
 
+	apbmisc@70000800 {
+		compatible = "nvidia,tegra20-apbmisc";
+		reg = <0x70000800 0x64>, /* Chip revision */
+		      <0x70000008 0x04>; /* Strapping options */
+	};
+
 	das@70000c00 {
 		compatible = "nvidia,tegra20-das";
 		reg = <0x70000c00 0x80>;
@@ -352,6 +404,23 @@
 		status = "disabled";
 	};
 
+	tegra_spdif: spdif@70002400 {
+		compatible = "nvidia,tegra20-spdif";
+		reg = <0x70002400 0x200>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_SPDIF_OUT>,
+			 <&tegra_car TEGRA20_CLK_SPDIF_IN>;
+		clock-names = "out", "in";
+		resets = <&tegra_car 10>;
+		dmas = <&apbdma 3>, <&apbdma 3>;
+		dma-names = "rx", "tx";
+		#sound-dai-cells = <0>;
+		status = "disabled";
+
+		assigned-clocks = <&tegra_car TEGRA20_CLK_SPDIF_OUT>;
+		assigned-clock-parents = <&tegra_car TEGRA20_CLK_PLL_A_OUT0>;
+	};
+
 	tegra_i2s1: i2s@70002800 {
 		compatible = "nvidia,tegra20-i2s";
 		reg = <0x70002800 0x200>;
@@ -390,7 +459,6 @@
 		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA20_CLK_UARTA>;
 		resets = <&tegra_car 6>;
-		reset-names = "serial";
 		dmas = <&apbdma 8>, <&apbdma 8>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -403,7 +471,6 @@
 		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA20_CLK_UARTB>;
 		resets = <&tegra_car 7>;
-		reset-names = "serial";
 		dmas = <&apbdma 9>, <&apbdma 9>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -416,7 +483,6 @@
 		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA20_CLK_UARTC>;
 		resets = <&tegra_car 55>;
-		reset-names = "serial";
 		dmas = <&apbdma 10>, <&apbdma 10>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -429,7 +495,6 @@
 		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA20_CLK_UARTD>;
 		resets = <&tegra_car 65>;
-		reset-names = "serial";
 		dmas = <&apbdma 19>, <&apbdma 19>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -442,7 +507,6 @@
 		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA20_CLK_UARTE>;
 		resets = <&tegra_car 66>;
-		reset-names = "serial";
 		dmas = <&apbdma 20>, <&apbdma 20>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -460,6 +524,8 @@
 		reset-names = "nand";
 		assigned-clocks = <&tegra_car TEGRA20_CLK_NDFLASH>;
 		assigned-clock-rates = <150000000>;
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&ndflash_dvfs_opp_table>;
 		status = "disabled";
 	};
 
@@ -473,6 +539,8 @@
 		clock-names = "gmi";
 		resets = <&tegra_car 42>;
 		reset-names = "gmi";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&nor_dvfs_opp_table>;
 		status = "disabled";
 	};
 
@@ -486,13 +554,6 @@
 		status = "disabled";
 	};
 
-	rtc@7000e000 {
-		compatible = "nvidia,tegra20-rtc";
-		reg = <0x7000e000 0x100>;
-		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA20_CLK_RTC>;
-	};
-
 	i2c@7000c000 {
 		compatible = "nvidia,tegra20-i2c";
 		reg = <0x7000c000 0x100>;
@@ -523,7 +584,7 @@
 		status = "disabled";
 	};
 
-	i2c@7000c400 {
+	i2c2: i2c@7000c400 {
 		compatible = "nvidia,tegra20-i2c";
 		reg = <0x7000c400 0x100>;
 		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
@@ -627,6 +688,13 @@
 		status = "disabled";
 	};
 
+	rtc@7000e000 {
+		compatible = "nvidia,tegra20-rtc";
+		reg = <0x7000e000 0x100>;
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_RTC>;
+	};
+
 	kbc@7000e200 {
 		compatible = "nvidia,tegra20-kbc";
 		reg = <0x7000e200 0x100>;
@@ -643,6 +711,52 @@
 		clocks = <&tegra_car TEGRA20_CLK_PCLK>, <&clk32k_in>;
 		clock-names = "pclk", "clk32k_in";
 		#clock-cells = <1>;
+
+		pd_core: core-domain {
+			#power-domain-cells = <0>;
+			operating-points-v2 = <&core_opp_table>;
+		};
+
+		powergates {
+			pd_mpe: mpe {
+				clocks = <&tegra_car TEGRA20_CLK_MPE>;
+				resets = <&mc TEGRA20_MC_RESET_MPEA>,
+					 <&mc TEGRA20_MC_RESET_MPEB>,
+					 <&mc TEGRA20_MC_RESET_MPEC>,
+					 <&tegra_car TEGRA20_CLK_MPE>;
+				power-domains = <&pd_core>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_3d: td {
+				clocks = <&tegra_car TEGRA20_CLK_GR3D>;
+				resets = <&mc TEGRA20_MC_RESET_3D>,
+					 <&tegra_car TEGRA20_CLK_GR3D>;
+				power-domains = <&pd_core>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_vde: vdec {
+				clocks = <&tegra_car TEGRA20_CLK_VDE>;
+				resets = <&mc TEGRA20_MC_RESET_VDE>,
+					 <&tegra_car TEGRA20_CLK_VDE>;
+				power-domains = <&pd_core>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_venc: venc {
+				clocks = <&tegra_car TEGRA20_CLK_ISP>,
+					 <&tegra_car TEGRA20_CLK_VI>,
+					 <&tegra_car TEGRA20_CLK_CSI>;
+				resets = <&mc TEGRA20_MC_RESET_ISP>,
+					 <&mc TEGRA20_MC_RESET_VI>,
+					 <&tegra_car TEGRA20_CLK_ISP>,
+					 <&tegra_car 20 /* VI */>,
+					 <&tegra_car TEGRA20_CLK_CSI>;
+				power-domains = <&pd_core>;
+				#power-domain-cells = <0>;
+			};
+		};
 	};
 
 	mc: memory-controller@7000f000 {
@@ -662,12 +776,13 @@
 		reg = <0x7000f400 0x400>;
 		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA20_CLK_EMC>;
+		power-domains = <&pd_core>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		#interconnect-cells = <0>;
 
-		operating-points-v2 = <&emc_icc_dvfs_opp_table>;
 		nvidia,memory-controller = <&mc>;
+		operating-points-v2 = <&emc_icc_dvfs_opp_table>;
 	};
 
 	fuse@7000f800 {
@@ -712,6 +827,9 @@
 			 <&tegra_car 72>,
 			 <&tegra_car 74>;
 		reset-names = "pex", "afi", "pcie_x";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&pcie_dvfs_opp_table>;
+
 		status = "disabled";
 
 		pci@1,0 {
@@ -744,16 +862,17 @@
 	};
 
 	usb@c5000000 {
-		compatible = "nvidia,tegra20-ehci", "usb-ehci";
+		compatible = "nvidia,tegra20-ehci";
 		reg = <0xc5000000 0x4000>;
 		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
-		nvidia,has-legacy-mode;
 		clocks = <&tegra_car TEGRA20_CLK_USBD>;
 		resets = <&tegra_car 22>;
 		reset-names = "usb";
 		nvidia,needs-double-reset;
 		nvidia,phy = <&phy1>;
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&usbd_dvfs_opp_table>;
 		status = "disabled";
 	};
 
@@ -761,6 +880,7 @@
 		compatible = "nvidia,tegra20-usb-phy";
 		reg = <0xc5000000 0x4000>,
 		      <0xc5000000 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA20_CLK_USBD>,
 			 <&tegra_car TEGRA20_CLK_PLL_U>,
@@ -779,11 +899,12 @@
 		nvidia,xcvr-lsfslew = <1>;
 		nvidia,xcvr-lsrslew = <1>;
 		nvidia,has-utmi-pad-registers;
+		nvidia,pmc = <&tegra_pmc 0>;
 		status = "disabled";
 	};
 
 	usb@c5004000 {
-		compatible = "nvidia,tegra20-ehci", "usb-ehci";
+		compatible = "nvidia,tegra20-ehci";
 		reg = <0xc5004000 0x4000>;
 		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "ulpi";
@@ -791,12 +912,15 @@
 		resets = <&tegra_car 58>;
 		reset-names = "usb";
 		nvidia,phy = <&phy2>;
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&usb2_dvfs_opp_table>;
 		status = "disabled";
 	};
 
 	phy2: usb-phy@c5004000 {
 		compatible = "nvidia,tegra20-usb-phy";
 		reg = <0xc5004000 0x4000>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "ulpi";
 		clocks = <&tegra_car TEGRA20_CLK_USB2>,
 			 <&tegra_car TEGRA20_CLK_PLL_U>,
@@ -805,11 +929,12 @@
 		resets = <&tegra_car 58>, <&tegra_car 22>;
 		reset-names = "usb", "utmi-pads";
 		#phy-cells = <0>;
+		nvidia,pmc = <&tegra_pmc 1>;
 		status = "disabled";
 	};
 
 	usb@c5008000 {
-		compatible = "nvidia,tegra20-ehci", "usb-ehci";
+		compatible = "nvidia,tegra20-ehci";
 		reg = <0xc5008000 0x4000>;
 		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
@@ -817,6 +942,8 @@
 		resets = <&tegra_car 59>;
 		reset-names = "usb";
 		nvidia,phy = <&phy3>;
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&usb3_dvfs_opp_table>;
 		status = "disabled";
 	};
 
@@ -824,6 +951,7 @@
 		compatible = "nvidia,tegra20-usb-phy";
 		reg = <0xc5008000 0x4000>,
 		      <0xc5000000 0x4000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA20_CLK_USB3>,
 			 <&tegra_car TEGRA20_CLK_PLL_U>,
@@ -840,6 +968,7 @@
 		nvidia,xcvr-setup = <9>;
 		nvidia,xcvr-lsfslew = <2>;
 		nvidia,xcvr-lsrslew = <2>;
+		nvidia,pmc = <&tegra_pmc 2>;
 		status = "disabled";
 	};
 
@@ -851,6 +980,8 @@
 		clock-names = "sdhci";
 		resets = <&tegra_car 14>;
 		reset-names = "sdhci";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&sdmmc1_dvfs_opp_table>;
 		status = "disabled";
 	};
 
@@ -862,6 +993,8 @@
 		clock-names = "sdhci";
 		resets = <&tegra_car 9>;
 		reset-names = "sdhci";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&sdmmc2_dvfs_opp_table>;
 		status = "disabled";
 	};
 
@@ -873,6 +1006,8 @@
 		clock-names = "sdhci";
 		resets = <&tegra_car 69>;
 		reset-names = "sdhci";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&sdmmc3_dvfs_opp_table>;
 		status = "disabled";
 	};
 
@@ -884,6 +1019,8 @@
 		clock-names = "sdhci";
 		resets = <&tegra_car 15>;
 		reset-names = "sdhci";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&sdmmc4_dvfs_opp_table>;
 		status = "disabled";
 	};
 
@@ -913,4 +1050,24 @@
 		interrupt-affinity = <&{/cpus/cpu@0}>,
 				     <&{/cpus/cpu@1}>;
 	};
+
+	sound-hdmi {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "NVIDIA Tegra20 HDMI";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		simple-audio-card,dai-link@0 {
+			reg = <0>;
+
+			codec {
+				sound-dai = <&tegra_hdmi>;
+			};
+
+			cpu {
+				sound-dai = <&tegra_spdif>;
+			};
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/tegra30-apalis-eval.dts b/arch/arm/boot/dts/nvidia/tegra30-apalis-eval.dts
index 9f653ef41da4..ccb9f29c5de3 100644
--- a/arch/arm/boot/dts/tegra30-apalis-eval.dts
+++ b/arch/arm/boot/dts/nvidia/tegra30-apalis-eval.dts
@@ -47,8 +47,20 @@
 		};
 	};
 
+	gpio@6000d000 {
+		/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
+		pex-perst-n-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "PEX_PERST_N";
+		};
+	};
+
 	/* Apalis UART1 */
 	serial@70006000 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
@@ -79,11 +91,6 @@
 		status = "okay";
 		clock-frequency = <400000>;
 
-		pcie-switch@58 {
-			compatible = "plx,pex8605";
-			reg = <0x58>;
-		};
-
 		/* M41T0M6 real time clock on carrier board */
 		rtc@68 {
 			compatible = "st,m41t0";
@@ -181,7 +188,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wakeup {
+		key-wakeup {
 			label = "WAKE1_MICO";
 			gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_WAKEUP>;
@@ -236,13 +243,3 @@
 		vin-supply = <&reg_5v0>;
 	};
 };
-
-&gpio {
-	/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
-	pex-perst-n {
-		gpio-hog;
-		gpios = <TEGRA_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "PEX_PERST_N";
-	};
-};
diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts b/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1-eval.dts
index 86e138e8c7f0..bc353324df43 100644
--- a/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts
+++ b/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1-eval.dts
@@ -48,8 +48,20 @@
 		};
 	};
 
+	gpio@6000d000 {
+		/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
+		pex-perst-n-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "PEX_PERST_N";
+		};
+	};
+
 	/* Apalis UART1 */
 	serial@70006000 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
@@ -80,11 +92,6 @@
 		status = "okay";
 		clock-frequency = <400000>;
 
-		pcie-switch@58 {
-			compatible = "plx,pex8605";
-			reg = <0x58>;
-		};
-
 		/* M41T0M6 real time clock on carrier board */
 		rtc@68 {
 			compatible = "st,m41t0";
@@ -182,7 +189,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wakeup {
+		key-wakeup {
 			label = "WAKE1_MICO";
 			gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_WAKEUP>;
@@ -254,13 +261,3 @@
 		vin-supply = <&vddio_sdmmc_1v8_reg>;
 	};
 };
-
-&gpio {
-	/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
-	pex-perst-n {
-		gpio-hog;
-		gpios = <TEGRA_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "PEX_PERST_N";
-	};
-};
diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi b/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi
index 6a3a72f81c44..ff0d684622f7 100644
--- a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi
@@ -829,14 +829,20 @@
 
 	serial@70006040 {
 		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
 	};
 
 	serial@70006200 {
 		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
 	};
 
 	serial@70006300 {
 		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
 	};
 
 	hdmi_ddc: i2c@7000c700 {
@@ -990,8 +996,7 @@
 		touchscreen@41 {
 			compatible = "st,stmpe811";
 			reg = <0x41>;
-			irq-gpio = <&gpio TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
-			interrupt-controller;
+			irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
 			id = <0>;
 			blocks = <0x5>;
 			irq-trigger = <0x1>;
@@ -1004,6 +1009,12 @@
 			/* ADC converstion time: 80 clocks */
 			st,sample-time = <4>;
 
+			stmpe_adc {
+				compatible = "st,stmpe-adc";
+				/* forbid to use ADC channels 3-0 (touch) */
+				st,norequest-mask = <0x0F>;
+			};
+
 			stmpe_touchscreen {
 				compatible = "st,stmpe-ts";
 				/* 8 sample average control */
@@ -1020,12 +1031,6 @@
 				/* 5 ms touch detect interrupt delay */
 				st,touch-det-delay = <5>;
 			};
-
-			stmpe_adc {
-				compatible = "st,stmpe-adc";
-				/* forbid to use ADC channels 3-0 (touch) */
-				st,norequest-mask = <0x0F>;
-			};
 		};
 
 		/*
@@ -1047,9 +1052,6 @@
 			regulator-max-microvolt = <1400000>;
 			regulator-boot-on;
 			regulator-always-on;
-			ti,vsel0-state-low;
-			/* VSEL1: EN_CORE_DVFS_N low for DVFS */
-			ti,vsel1-state-low;
 		};
 	};
 
@@ -1122,16 +1124,16 @@
 		mmc-ddr-1_8v;
 	};
 
-	clk32k_in: xtal1 {
+	clk16m: clock-osc4 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
+		clock-frequency = <16000000>;
 	};
 
-	clk16m: osc4 {
+	clk32k_in: clock-xtal1 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency = <16000000>;
+		clock-frequency = <32768>;
 	};
 
 	reg_1v8_avdd_hdmi_pll: regulator-1v8-avdd-hdmi-pll {
diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi
index b2ac51fb15b1..d38f1dd38a90 100644
--- a/arch/arm/boot/dts/tegra30-apalis.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi
@@ -820,14 +820,20 @@
 
 	serial@70006040 {
 		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
 	};
 
 	serial@70006200 {
 		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
 	};
 
 	serial@70006300 {
 		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
 	};
 
 	hdmi_ddc: i2c@7000c700 {
@@ -973,8 +979,7 @@
 		touchscreen@41 {
 			compatible = "st,stmpe811";
 			reg = <0x41>;
-			irq-gpio = <&gpio TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
-			interrupt-controller;
+			irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
 			id = <0>;
 			blocks = <0x5>;
 			irq-trigger = <0x1>;
@@ -987,6 +992,12 @@
 			/* ADC converstion time: 80 clocks */
 			st,sample-time = <4>;
 
+			stmpe_adc {
+				compatible = "st,stmpe-adc";
+				/* forbid to use ADC channels 3-0 (touch) */
+				st,norequest-mask = <0x0F>;
+			};
+
 			stmpe_touchscreen {
 				compatible = "st,stmpe-ts";
 				/* 8 sample average control */
@@ -1003,12 +1014,6 @@
 				/* 5 ms touch detect interrupt delay */
 				st,touch-det-delay = <5>;
 			};
-
-			stmpe_adc {
-				compatible = "st,stmpe-adc";
-				/* forbid to use ADC channels 3-0 (touch) */
-				st,norequest-mask = <0x0F>;
-			};
 		};
 
 		/*
@@ -1030,9 +1035,6 @@
 			regulator-max-microvolt = <1400000>;
 			regulator-boot-on;
 			regulator-always-on;
-			ti,vsel0-state-low;
-			/* VSEL1: EN_CORE_DVFS_N low for DVFS */
-			ti,vsel1-state-low;
 		};
 	};
 
@@ -1105,16 +1107,16 @@
 		mmc-ddr-1_8v;
 	};
 
-	clk32k_in: xtal1 {
+	clk16m: clock-osc4 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
+		clock-frequency = <16000000>;
 	};
 
-	clk16m: osc4 {
+	clk32k_in: clock-xtal1 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency = <16000000>;
+		clock-frequency = <32768>;
 	};
 
 	reg_1v8_avdd_hdmi_pll: regulator-1v8-avdd-hdmi-pll {
diff --git a/arch/arm/boot/dts/nvidia/tegra30-asus-lvds-display.dtsi b/arch/arm/boot/dts/nvidia/tegra30-asus-lvds-display.dtsi
new file mode 100644
index 000000000000..680edff0f26f
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-lvds-display.dtsi
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/* This dtsi file describes parts common for Asus T30 devices with a LVDS panel. */
+
+#include <dt-bindings/gpio/tegra-gpio.h>
+
+/ {
+	host1x@50000000 {
+		lcd: dc@54200000 {
+			rgb {
+				status = "okay";
+
+				port {
+					dpi_output: endpoint {
+						remote-endpoint = <&bridge_input>;
+						bus-width = <24>;
+					};
+				};
+			};
+		};
+	};
+
+	display-panel {
+		power-supply = <&vdd_pnl>;
+		ddc-i2c-bus = <&lcd_ddc>;
+		backlight = <&backlight>;
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&bridge_output>;
+			};
+		};
+	};
+
+	/* Texas Instruments SN75LVDS83B LVDS Transmitter */
+	lvds-encoder {
+		compatible = "ti,sn75lvds83", "lvds-encoder";
+
+		powerdown-gpios = <&gpio TEGRA_GPIO(N, 6) GPIO_ACTIVE_LOW>;
+		power-supply = <&vdd_3v3_sys>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				bridge_input: endpoint {
+					remote-endpoint = <&dpi_output>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				bridge_output: endpoint {
+					remote-endpoint = <&panel_input>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-E1565.dts b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-E1565.dts
index a25b8560b0cd..a25b8560b0cd 100644
--- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-E1565.dts
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-E1565.dts
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-PM269.dts b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-PM269.dts
index 06ef13ea5df8..06ef13ea5df8 100644
--- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-PM269.dts
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-PM269.dts
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-common.dtsi
index 9732cd6f20b7..15f53babdc21 100644
--- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-common.dtsi
@@ -8,6 +8,7 @@
 #include "tegra30.dtsi"
 #include "tegra30-cpu-opp.dtsi"
 #include "tegra30-cpu-opp-microvolt.dtsi"
+#include "tegra30-asus-lvds-display.dtsi"
 
 / {
 	aliases {
@@ -28,6 +29,14 @@
 	 */
 	chosen {};
 
+	firmware {
+		trusted-foundations {
+			compatible = "tlm,trusted-foundations";
+			tlm,version-major = <0x0>;
+			tlm,version-minor = <0x0>;
+		};
+	};
+
 	memory@80000000 {
 		reg = <0x80000000 0x40000000>;
 	};
@@ -59,35 +68,20 @@
 		};
 	};
 
-	host1x@50000000 {
-		dc@54200000 {
-			rgb {
-				status = "okay";
-
-				port@0 {
-					lcd_output: endpoint {
-						remote-endpoint = <&lvds_encoder_input>;
-						bus-width = <24>;
-					};
-				};
-			};
+	gpio@6000d000 {
+		init-low-power-mode-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
+			input;
 		};
-	};
 
-	gpio@6000d000 {
 		init-mode-hog {
 			gpio-hog;
-			gpios =	<TEGRA_GPIO(DD, 7) GPIO_ACTIVE_HIGH>,
+			gpios = <TEGRA_GPIO(DD, 7) GPIO_ACTIVE_HIGH>,
 				<TEGRA_GPIO(CC, 6) GPIO_ACTIVE_HIGH>,
 				<TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
 			output-low;
 		};
-
-		init-low-power-mode-hog {
-			gpio-hog;
-			gpios = <TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
-			input;
-		};
 	};
 
 	pinmux@70000868 {
@@ -804,11 +798,15 @@
 
 	uartb: serial@70006040 {
 		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
 		/* GPS BCM4751 */
 	};
 
 	uartc: serial@70006200 {
 		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
 		status = "okay";
 
 		nvidia,adjust-baud-rates = <0 9600 100>,
@@ -819,6 +817,10 @@
 		bluetooth {
 			compatible = "brcm,bcm4330-bt";
 
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "host-wakeup";
+
 			max-speed = <4000000>;
 
 			clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
@@ -828,8 +830,7 @@
 			vddio-supply = <&vdd_1v8>;
 
 			device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
-			host-wakeup-gpios =   <&gpio TEGRA_GPIO(U, 6) GPIO_ACTIVE_HIGH>;
-			shutdown-gpios =      <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
+			shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
 		};
 	};
 
@@ -842,7 +843,7 @@
 		status = "okay";
 
 		touchscreen@10 {
-			compatible ="elan,ektf3624";
+			compatible = "elan,ektf3624";
 			reg = <0x10>;
 
 			interrupt-parent = <&gpio>;
@@ -914,6 +915,9 @@
 			reg = <0x1c>;
 
 			realtek,dmic1-data-pin = <1>;
+
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+			clock-names = "mclk";
 		};
 
 		nct72: temperature-sensor@4c {
@@ -941,9 +945,29 @@
 			interrupts = <TEGRA_GPIO(V, 1) IRQ_TYPE_EDGE_BOTH>;
 
 			summit,enable-charge-control = <SMB3XX_CHG_ENABLE_PIN_ACTIVE_LOW>;
+			summit,inok-polarity = <SMB3XX_SYSOK_INOK_ACTIVE_LOW>;
 			summit,enable-usb-charging;
 
 			monitored-battery = <&battery_cell>;
+
+			usb_vbus: usb-vbus {
+				regulator-name = "usb_vbus";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-min-microamp = <750000>;
+				regulator-max-microamp = <750000>;
+
+				/*
+				 * SMB347 INOK input pin is connected to PMIC's
+				 * ACOK output, which is fixed to ACTIVE_LOW as
+				 * long as battery voltage is in a good range.
+				 *
+				 * Active INOK disables SMB347 output, so polarity
+				 * needs to be toggled when we want to get the
+				 * output.
+				 */
+				summit,needs-inok-toggle;
+			};
 		};
 	};
 
@@ -957,6 +981,7 @@
 		nvidia,core-pwr-off-time = <0>;
 		nvidia,core-power-req-active-high;
 		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
 	};
 
 	ahub@70080000 {
@@ -965,17 +990,6 @@
 		};
 	};
 
-	brcm_wifi_pwrseq: wifi-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-
-		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
-		clock-names = "ext_clock";
-
-		reset-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_LOW>;
-		post-power-on-delay-ms = <300>;
-		power-off-delay-us = <300>;
-	};
-
 	sdmmc3: mmc@78000400 {
 		status = "okay";
 
@@ -1016,12 +1030,13 @@
 	usb@7d000000 {
 		compatible = "nvidia,tegra30-udc";
 		status = "okay";
-		dr_mode = "peripheral";
+		dr_mode = "otg";
+		vbus-supply = <&usb_vbus>;
 	};
 
 	usb-phy@7d000000 {
 		status = "okay";
-		dr_mode = "peripheral";
+		dr_mode = "otg";
 		nvidia,hssync-start-delay = <0>;
 		nvidia,xcvr-lsfslew = <2>;
 		nvidia,xcvr-lsrslew = <2>;
@@ -1045,7 +1060,7 @@
 	};
 
 	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32768>;
@@ -1080,18 +1095,11 @@
 
 	display-panel {
 		/*
-		 * Nexus 7 supports two compatible panel models:
-		 *
-		 *  1. hydis,hv070wx2-1e0
-		 *  2. chunghwa,claa070wp03xg
-		 *
-		 * We want to use timing which is optimized for Nexus 7,
-		 * hence we need to customize the timing.
+		 * Some device variants come with a Hydis HV070WX2-1E0, but
+		 * since they are all largely compatible, we'll go with the
+		 * Chunghwa one here.
 		 */
-		compatible = "panel-lvds";
-
-		power-supply = <&vdd_pnl>;
-		backlight = <&backlight>;
+		compatible = "chunghwa,claa070wp03xg", "panel-lvds";
 
 		width-mm = <94>;
 		height-mm = <150>;
@@ -1099,35 +1107,14 @@
 
 		data-mapping = "jeida-24";
 
-		port {
-			panel_input: endpoint {
-				remote-endpoint = <&lvds_encoder_output>;
-			};
-		};
-	};
-
-	firmware {
-		trusted-foundations {
-			compatible = "tlm,trusted-foundations";
-			tlm,version-major = <0x0>;
-			tlm,version-minor = <0x0>;
-		};
+		/* DDC unconnected on Nexus 7 */
+		/delete-property/ ddc-i2c-bus;
 	};
 
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		hall-sensor {
-			label = "Lid";
-			gpios = <&gpio TEGRA_GPIO(S, 6) GPIO_ACTIVE_LOW>;
-			linux,input-type = <EV_SW>;
-			linux,code = <SW_LID>;
-			debounce-interval = <500>;
-			wakeup-event-action = <EV_ACT_DEASSERTED>;
-			wakeup-source;
-		};
-
-		power {
+		key-power {
 			label = "Power";
 			gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
@@ -1136,7 +1123,16 @@
 			wakeup-source;
 		};
 
-		volume-up {
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(Q, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-up {
 			label = "Volume Up";
 			gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
@@ -1145,45 +1141,29 @@
 			wakeup-source;
 		};
 
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio TEGRA_GPIO(Q, 3) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-			debounce-interval = <10>;
-			wakeup-event-action = <EV_ACT_ASSERTED>;
+		switch-hall-sensor {
+			label = "Lid";
+			gpios = <&gpio TEGRA_GPIO(S, 6) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			debounce-interval = <500>;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
 			wakeup-source;
 		};
 	};
 
-	lvds-encoder {
-		compatible = "ti,sn75lvds83", "lvds-encoder";
-
-		powerdown-gpios = <&gpio TEGRA_GPIO(N, 6) GPIO_ACTIVE_LOW>;
-		power-supply = <&vdd_3v3_sys>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				lvds_encoder_input: endpoint {
-					remote-endpoint = <&lcd_output>;
-				};
-			};
+	brcm_wifi_pwrseq: pwrseq-wifi {
+		compatible = "mmc-pwrseq-simple";
 
-			port@1 {
-				reg = <1>;
+		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+		clock-names = "ext_clock";
 
-				lvds_encoder_output: endpoint {
-					remote-endpoint = <&panel_input>;
-				};
-			};
-		};
+		reset-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <300>;
+		power-off-delay-us = <300>;
 	};
 
-	vdd_5v0_sys: regulator@0 {
+	vdd_5v0_sys: regulator-5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_5v0";
 		regulator-min-microvolt = <5000000>;
@@ -1192,7 +1172,7 @@
 		regulator-boot-on;
 	};
 
-	vdd_3v3_sys: regulator@1 {
+	vdd_3v3_sys: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_3v3";
 		regulator-min-microvolt = <3300000>;
@@ -1202,7 +1182,7 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_pnl: regulator@2 {
+	vdd_pnl: regulator-panel {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_panel";
 		regulator-min-microvolt = <3300000>;
@@ -1213,7 +1193,7 @@
 		vin-supply = <&vdd_3v3_sys>;
 	};
 
-	vcc_3v3_ts: regulator@3 {
+	vcc_3v3_ts: regulator-ts {
 		compatible = "regulator-fixed";
 		regulator-name = "ldo_s-1167_3v3";
 		regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi
index 53966fa4eef2..694c7fe37eb8 100644
--- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi
@@ -22,13 +22,6 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&max77620_default>;
 
-			max77620_default: pinmux {
-				gpio4 {
-					pins = "gpio4";
-					function = "32k-out1";
-				};
-			};
-
 			cpu-pwr-req-hog {
 				gpio-hog;
 				gpios = <6 GPIO_ACTIVE_HIGH>;
@@ -49,6 +42,13 @@
 				};
 			};
 
+			max77620_default: pinmux {
+				gpio4 {
+					pins = "gpio4";
+					function = "32k-out1";
+				};
+			};
+
 			regulators {
 				in-sd0-supply = <&vdd_5v0_sys>;
 				in-sd1-supply = <&vdd_5v0_sys>;
@@ -166,12 +166,12 @@
 		};
 	};
 
-	vdd_3v3_sys: regulator@1 {
+	vdd_3v3_sys: regulator-3v3 {
 		gpio = <&pmic 3 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
 
-	regulator@4 {
+	regulator-usb {
 		compatible = "regulator-fixed";
 		regulator-name = "avdd_usb";
 		regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-memory-timings.dtsi b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-memory-timings.dtsi
index bcff0997ee51..8944a4a5a8d7 100644
--- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-memory-timings.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-memory-timings.dtsi
@@ -1562,16 +1562,16 @@
 			};
 		};
 	};
-};
 
-&emc_icc_dvfs_opp_table {
-	/delete-node/ opp@750000000,1300;
-	/delete-node/ opp@800000000,1300;
-	/delete-node/ opp@900000000,1350;
-};
+	opp-table-actmon {
+		/delete-node/ opp-750000000;
+		/delete-node/ opp-800000000;
+		/delete-node/ opp-900000000;
+	};
 
-&emc_bw_dfs_opp_table {
-	/delete-node/ opp@750000000;
-	/delete-node/ opp@800000000;
-	/delete-node/ opp@900000000;
+	opp-table-emc {
+		/delete-node/ opp-750000000-1300;
+		/delete-node/ opp-800000000-1300;
+		/delete-node/ opp-900000000-1350;
+	};
 };
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-ti-pmic.dtsi
index 9365ae607239..ee4a3f482769 100644
--- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-ti-pmic.dtsi
@@ -143,7 +143,7 @@
 		};
 	};
 
-	vdd_3v3_sys: regulator@1 {
+	vdd_3v3_sys: regulator-3v3 {
 		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper.dtsi b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper.dtsi
index a044dbd200a9..c19a0419112a 100644
--- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper.dtsi
@@ -6,20 +6,6 @@
 / {
 	compatible = "asus,grouper", "nvidia,tegra30";
 
-	display-panel {
-		panel-timing {
-			clock-frequency = <68000000>;
-			hactive = <800>;
-			vactive = <1280>;
-			hfront-porch = <24>;
-			hback-porch = <32>;
-			hsync-len = <24>;
-			vsync-len = <1>;
-			vfront-porch = <5>;
-			vback-porch = <32>;
-		};
-	};
-
 	pinmux@70000868 {
 		state_default: pinmux {
 			lcd_dc1_pd2 {
@@ -137,7 +123,6 @@
 		nfc@28 {
 			compatible = "nxp,pn544-i2c";
 			reg = <0x28>;
-			clock-frequency = <100000>;
 
 			interrupt-parent = <&gpio>;
 			interrupts = <TEGRA_GPIO(X, 0) IRQ_TYPE_EDGE_RISING>;
@@ -146,4 +131,18 @@
 			firmware-gpios = <&gpio TEGRA_GPIO(R, 3) GPIO_ACTIVE_HIGH>;
 		};
 	};
+
+	display-panel {
+		panel-timing {
+			clock-frequency = <68000000>;
+			hactive = <800>;
+			vactive = <1280>;
+			hfront-porch = <24>;
+			hback-porch = <32>;
+			hsync-len = <24>;
+			vsync-len = <1>;
+			vfront-porch = <5>;
+			vback-porch = <32>;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia-E1565.dts b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-tilapia-E1565.dts
index f1c63feb4af9..f1c63feb4af9 100644
--- a/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia-E1565.dts
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-tilapia-E1565.dts
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia-memory-timings.dtsi b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-tilapia-memory-timings.dtsi
index 9169de34fa00..9169de34fa00 100644
--- a/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia-memory-timings.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-tilapia-memory-timings.dtsi
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia.dtsi b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-tilapia.dtsi
index a681ad51fddd..94c80134574e 100644
--- a/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-tilapia.dtsi
@@ -6,26 +6,10 @@
 / {
 	compatible = "asus,tilapia", "asus,grouper", "nvidia,tegra30";
 
-	display-panel {
-		enable-gpios = <&gpio TEGRA_GPIO(V, 6) GPIO_ACTIVE_HIGH>;
-
-		panel-timing {
-			clock-frequency = <81750000>;
-			hactive = <800>;
-			vactive = <1280>;
-			hfront-porch = <64>;
-			hback-porch = <128>;
-			hsync-len = <64>;
-			vsync-len = <1>;
-			vfront-porch = <5>;
-			vback-porch = <2>;
-		};
-	};
-
 	gpio@6000d000 {
 		init-mode-3g-hog {
 			gpio-hog;
-			gpios =	<TEGRA_GPIO(D, 2) GPIO_ACTIVE_HIGH>,
+			gpios = <TEGRA_GPIO(D, 2) GPIO_ACTIVE_HIGH>,
 				<TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>,
 				<TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>,
 				<TEGRA_GPIO(P, 1) GPIO_ACTIVE_HIGH>,
@@ -223,8 +207,6 @@
 			compatible = "nxp,pn544-i2c";
 			reg = <0x2a>;
 
-			clock-frequency = <100000>;
-
 			interrupt-parent = <&gpio>;
 			interrupts = <TEGRA_GPIO(S, 7) IRQ_TYPE_EDGE_RISING>;
 
@@ -232,4 +214,20 @@
 			firmware-gpios = <&gpio TEGRA_GPIO(P, 3) GPIO_ACTIVE_HIGH>;
 		};
 	};
+
+	display-panel {
+		enable-gpios = <&gpio TEGRA_GPIO(V, 6) GPIO_ACTIVE_HIGH>;
+
+		panel-timing {
+			clock-frequency = <81750000>;
+			hactive = <800>;
+			vactive = <1280>;
+			hfront-porch = <64>;
+			hback-porch = <128>;
+			hsync-len = <64>;
+			vsync-len = <1>;
+			vfront-porch = <5>;
+			vback-porch = <2>;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/nvidia/tegra30-asus-p1801-t.dts b/arch/arm/boot/dts/nvidia/tegra30-asus-p1801-t.dts
new file mode 100644
index 000000000000..9241cc269a89
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-p1801-t.dts
@@ -0,0 +1,2087 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "tegra30.dtsi"
+#include "tegra30-cpu-opp.dtsi"
+#include "tegra30-cpu-opp-microvolt.dtsi"
+
+/ {
+	model = "Asus Portable AiO P1801-T";
+	compatible = "asus,p1801-t", "nvidia,tegra30";
+	chassis-type = "convertible";
+
+	aliases {
+		mmc0 = &sdmmc4; /* eMMC */
+		mmc1 = &sdmmc1; /* uSD slot */
+		mmc2 = &sdmmc3; /* WiFi */
+
+		rtc0 = &pmic;
+		rtc1 = "/rtc@7000e000";
+
+		display0 = &hdmi;
+
+		serial1 = &uartc; /* Bluetooth */
+		serial2 = &uartb; /* GPS */
+	};
+
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	firmware {
+		trusted-foundations {
+			compatible = "tlm,trusted-foundations";
+			tlm,version-major = <2>;
+			tlm,version-minor = <8>;
+		};
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		linux,cma@80000000 {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0x80000000 0x30000000>;
+			size = <0x10000000>;		/* 256MiB */
+			linux,cma-default;
+			reusable;
+		};
+
+		framebuffer@abe01000 {
+			reg = <0xabe01000 (1920 * 1080 * 4)>;
+			no-map;
+		};
+
+		trustzone@bfe00000 {
+			reg = <0xbfe00000 0x200000>;	/* 2MB */
+			no-map;
+		};
+
+		ramoops@fea00000 {
+			compatible = "ramoops";
+			reg = <0xfea00000 0x10000>;	/* 64kB */
+			console-size = <0x8000>;	/* 32kB */
+			record-size = <0x400>;		/*  1kB */
+			ecc-size = <16>;
+		};
+	};
+
+	host1x@50000000 {
+		hdmi: hdmi@54280000 {
+			status = "okay";
+
+			hdmi-supply = <&hdmi_5v0_sys>;
+			pll-supply = <&vdd_1v8_vio>;
+			vdd-supply = <&vdd_3v3_sys>;
+
+			port {
+				hdmi_out: endpoint {
+					remote-endpoint = <&bridge_in>;
+				};
+			};
+		};
+	};
+
+	gpio@6000d000 {
+		init-lpm-in-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(B, 1) GPIO_ACTIVE_HIGH>;
+			input;
+		};
+
+		init-lpm-out-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(K, 7) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
+
+		tp-vendor-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
+			input;
+		};
+	};
+
+	vde@6001a000 {
+		assigned-clocks = <&tegra_car TEGRA30_CLK_VDE>;
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_P>;
+		assigned-clock-rates = <408000000>;
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* SDMMC1 pinmux */
+			sdmmc1-clk {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1-cmd {
+				nvidia,pins = "sdmmc1_dat3_py4",
+					      "sdmmc1_dat2_py5",
+					      "sdmmc1_dat1_py6",
+					      "sdmmc1_dat0_py7",
+					      "sdmmc1_cmd_pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1-cd {
+				nvidia,pins = "gmi_iordy_pi5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1-wp {
+				nvidia,pins = "vi_d11_pt3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* SDMMC2 pinmux */
+			vi-d1-pd5 {
+				nvidia,pins = "vi_d1_pd5",
+					      "vi_d2_pl0",
+					      "vi_d3_pl1",
+					      "vi_d5_pl3",
+					      "vi_d7_pl5";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			vi-d8-pl6 {
+				nvidia,pins = "vi_d8_pl6",
+					      "vi_d9_pl7";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+				nvidia,io-reset = <0>;
+			};
+
+			/* SDMMC3 pinmux */
+			sdmmc3-clk {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3-cmd {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+					      "sdmmc3_dat0_pb7",
+					      "sdmmc3_dat1_pb6",
+					      "sdmmc3_dat2_pb5",
+					      "sdmmc3_dat3_pb4",
+					      "sdmmc3_dat4_pd1",
+					      "sdmmc3_dat5_pd0",
+					      "sdmmc3_dat6_pd3",
+					      "sdmmc3_dat7_pd4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* SDMMC4 pinmux */
+			sdmmc4-clk {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-cmd {
+				nvidia,pins = "sdmmc4_cmd_pt7",
+					      "sdmmc4_dat0_paa0",
+					      "sdmmc4_dat1_paa1",
+					      "sdmmc4_dat2_paa2",
+					      "sdmmc4_dat3_paa3",
+					      "sdmmc4_dat4_paa4",
+					      "sdmmc4_dat5_paa5",
+					      "sdmmc4_dat6_paa6",
+					      "sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-rst-n {
+				nvidia,pins = "sdmmc4_rst_n_pcc3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			cam-mclk {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			drive-sdmmc4 {
+				nvidia,pins = "drive_gma",
+					      "drive_gmb",
+					      "drive_gmc",
+					      "drive_gmd";
+				nvidia,pull-down-strength = <9>;
+				nvidia,pull-up-strength = <9>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+
+			/* I2C pinmux */
+			gen1-i2c {
+				nvidia,pins = "gen1_i2c_scl_pc4",
+					      "gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+			gen2-i2c {
+				nvidia,pins = "gen2_i2c_scl_pt5",
+					      "gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+			cam-i2c {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+					      "cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+			ddc-i2c {
+				nvidia,pins = "ddc_scl_pv4",
+					      "ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+			pwr-i2c {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+					      "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+			hotplug-i2c {
+				nvidia,pins = "pu4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* HDMI pinmux */
+			hdmi-cec {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+			hdmi-hpd {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "hdmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* UART-A */
+			ulpi-data0-po1 {
+				nvidia,pins = "ulpi_data0_po1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi-data1-po2 {
+				nvidia,pins = "ulpi_data1_po2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi-data5-po6 {
+				nvidia,pins = "ulpi_data5_po6";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi-data7-po0 {
+				nvidia,pins = "ulpi_data7_po0",
+					      "ulpi_data2_po3",
+					      "ulpi_data3_po4",
+					      "ulpi_data4_po5",
+					      "ulpi_data6_po7";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* UART-B */
+			uartb-txd-rts {
+				nvidia,pins = "uart2_txd_pc2",
+					      "uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uartb-rxd-cts {
+				nvidia,pins = "uart2_rxd_pc3",
+					      "uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* UART-C */
+			uartc-rxd-cts {
+				nvidia,pins = "uart3_cts_n_pa1",
+					      "uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uartc-txd-rts {
+				nvidia,pins = "uart3_rts_n_pc0",
+					      "uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* UART-D */
+			ulpi-nxt-py2 {
+				nvidia,pins = "ulpi_nxt_py2";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi-clk-py0 {
+				nvidia,pins = "ulpi_clk_py0",
+					      "ulpi_dir_py1",
+					      "ulpi_stp_py3";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* I2S pinmux */
+			dap-i2s0 {
+				nvidia,pins = "dap1_fs_pn0",
+					      "dap1_din_pn1",
+					      "dap1_dout_pn2",
+					      "dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap-i2s1 {
+				nvidia,pins = "dap2_fs_pa2",
+					      "dap2_sclk_pa3",
+					      "dap2_din_pa4",
+					      "dap2_dout_pa5";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3-fs {
+				nvidia,pins = "dap3_fs_pp0",
+					      "dap3_din_pp1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3-dout {
+				nvidia,pins = "dap3_dout_pp2",
+					      "dap3_sclk_pp3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap-i2s3 {
+				nvidia,pins = "dap4_fs_pp4",
+					      "dap4_din_pp5",
+					      "dap4_dout_pp6",
+					      "dap4_sclk_pp7";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* sensors pinmux */
+			nct-irq {
+				nvidia,pins = "pcc2";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Asus EC pinmux */
+			ec-irqs {
+				nvidia,pins = "kb_row10_ps2",
+					      "kb_row15_ps7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ec-reqs {
+				nvidia,pins = "kb_col1_pq1";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* memory type bootstrap */
+			mem-boostraps {
+				nvidia,pins = "gmi_ad4_pg4",
+					      "gmi_ad5_pg5";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* PCI-e pinmux */
+			pex-l2-rst-n {
+				nvidia,pins = "pex_l2_rst_n_pcc6",
+					      "pex_l0_rst_n_pdd1",
+					      "pex_l1_rst_n_pdd5";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex-l2-clkreq-n {
+				nvidia,pins = "pex_l2_clkreq_n_pcc7",
+					      "pex_l0_prsnt_n_pdd0",
+					      "pex_l0_clkreq_n_pdd2",
+					      "pex_wake_n_pdd3",
+					      "pex_l1_prsnt_n_pdd4",
+					      "pex_l1_clkreq_n_pdd6",
+					      "pex_l2_prsnt_n_pdd7";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* SPI pinmux */
+			spi1-mosi-px4 {
+				nvidia,pins = "spi1_mosi_px4",
+					      "spi1_sck_px5",
+					      "spi1_cs0_n_px6",
+					      "spi1_miso_px7";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			spi2-cs1-n-pw2 {
+				nvidia,pins = "spi2_cs1_n_pw2";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			spi2-sck-px2 {
+				nvidia,pins = "spi2_sck_px2";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi-a17-pb0 {
+				nvidia,pins = "gmi_a17_pb0",
+					      "gmi_a16_pj7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-a18-pb1 {
+				nvidia,pins = "gmi_a18_pb1";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi-a19-pk7 {
+				nvidia,pins = "gmi_a19_pk7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Display A pinmux */
+			lcd-pwr0-pb2 {
+				nvidia,pins = "lcd_pwr0_pb2",
+					      "lcd_pclk_pb3",
+					      "lcd_pwr1_pc1",
+					      "lcd_d0_pe0",
+					      "lcd_d1_pe1",
+					      "lcd_d2_pe2",
+					      "lcd_d3_pe3",
+					      "lcd_d4_pe4",
+					      "lcd_d5_pe5",
+					      "lcd_d6_pe6",
+					      "lcd_d7_pe7",
+					      "lcd_d8_pf0",
+					      "lcd_d9_pf1",
+					      "lcd_d10_pf2",
+					      "lcd_d11_pf3",
+					      "lcd_d12_pf4",
+					      "lcd_d13_pf5",
+					      "lcd_d14_pf6",
+					      "lcd_d15_pf7",
+					      "lcd_de_pj1",
+					      "lcd_hsync_pj3",
+					      "lcd_vsync_pj4",
+					      "lcd_d16_pm0",
+					      "lcd_d17_pm1",
+					      "lcd_d18_pm2",
+					      "lcd_d19_pm3",
+					      "lcd_d20_pm4",
+					      "lcd_d21_pm5",
+					      "lcd_d22_pm6",
+					      "lcd_d23_pm7",
+					      "lcd_dc0_pn6",
+					      "lcd_sdin_pz2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd-cs0-n-pn4 {
+				nvidia,pins = "lcd_cs0_n_pn4",
+					      "lcd_sdout_pn5",
+					      "lcd_wr_n_pz3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			blink {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,function = "blink";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* KBC keys */
+			kb-col0-pq0 {
+				nvidia,pins = "kb_col0_pq0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb-col1-pq1 {
+				nvidia,pins = "kb_row1_pr1",
+					      "kb_row3_pr3",
+					      "kb_row14_ps6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb-col4-pq4 {
+				nvidia,pins = "kb_col4_pq4",
+					      "kb_col5_pq5",
+					      "kb_col7_pq7",
+					      "kb_row2_pr2",
+					      "kb_row4_pr4",
+					      "kb_row5_pr5",
+					      "kb_row12_ps4",
+					      "kb_row13_ps5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi-wp-n-pc7 {
+				nvidia,pins = "gmi_wp_n_pc7",
+					      "gmi_wait_pi7",
+					      "gmi_cs3_n_pk4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-cs0-n-pj0 {
+				nvidia,pins = "gmi_cs0_n_pj0",
+					      "gmi_cs1_n_pj2",
+					      "gmi_cs2_n_pk3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			vi-pclk-pt0 {
+				nvidia,pins = "vi_pclk_pt0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+				nvidia,io-reset = <0>;
+			};
+
+			/* GPIO keys pinmux */
+			power-key {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			vol-keys {
+				nvidia,pins = "kb_col2_pq2",
+					      "kb_col3_pq3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Bluetooth */
+			bt-shutdown {
+				nvidia,pins = "pu0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			bt-dev-wake {
+				nvidia,pins = "pu1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			bt-host-wake {
+				nvidia,pins = "pu6";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pu2 {
+				nvidia,pins = "pu2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcc1 {
+				nvidia,pins = "pcc1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pv2 {
+				nvidia,pins = "pv2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pv3 {
+				nvidia,pins = "pv3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			vi-vsync-pd6 {
+				nvidia,pins = "vi_vsync_pd6",
+					      "vi_hsync_pd7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+				nvidia,io-reset = <0>;
+			};
+			vi-d10-pt2 {
+				nvidia,pins = "vi_d10_pt2",
+					      "vi_d0_pt4",
+					      "pbb0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb-row0-pr0 {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-ad0-pg0 {
+				nvidia,pins = "gmi_ad0_pg0",
+					      "gmi_ad1_pg1",
+					      "gmi_ad2_pg2",
+					      "gmi_ad3_pg3",
+					      "gmi_ad6_pg6",
+					      "gmi_ad7_pg7",
+					      "gmi_wr_n_pi0",
+					      "gmi_oe_n_pi1",
+					      "gmi_dqs_pi2",
+					      "gmi_adv_n_pk0",
+					      "gmi_clk_pk1";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-ad13-ph5 {
+				nvidia,pins = "gmi_ad13_ph5";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi-ad10-ph2 {
+				nvidia,pins = "gmi_ad10_ph2",
+					      "gmi_ad11_ph3",
+					      "gmi_ad14_ph6";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-ad12-ph4 {
+				nvidia,pins = "gmi_ad12_ph4",
+					      "gmi_rst_n_pi4";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* USB2 VBUS control */
+			usb2-vbus-control {
+				nvidia,pins = "gmi_ad15_ph7";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* PWM pinmux */
+			pwm-0 {
+				nvidia,pins = "gmi_ad8_ph0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pwm-2 {
+				nvidia,pins = "pu5";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* S/PDIF pinmux */
+			spdif-out {
+				nvidia,pins = "spdif_out_pk5";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spdif-in {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			vi-d4-pl2 {
+				nvidia,pins = "vi_d4_pl2";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			vi-d6-pl4 {
+				nvidia,pins = "vi_d6_pl4";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <0>;
+				nvidia,io-reset = <0>;
+			};
+			vi-mclk-pt1 {
+				nvidia,pins = "vi_mclk_pt1";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			jtag-rtck {
+				nvidia,pins = "jtag_rtck_pu7";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			crt-hsync-pv6 {
+				nvidia,pins = "crt_hsync_pv6",
+					      "crt_vsync_pv7";
+				nvidia,function = "crt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk1-out {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2-out {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "extperiph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk3-out {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sys-clk-req {
+				nvidia,pins = "sys_clk_req_pz5";
+				nvidia,function = "sysclk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb4 {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb5 {
+				nvidia,pins = "pbb5";
+				nvidia,function = "vgp5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb6 {
+				nvidia,pins = "pbb6";
+				nvidia,function = "vgp6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2-req-pcc5 {
+				nvidia,pins = "clk2_req_pcc5",
+					      "clk1_req_pee2";
+				nvidia,function = "dap";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk3-req-pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "dev3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* P1801-T specific pinmux */
+			lcd-pwr2 {
+				nvidia,pins = "lcd_pwr2_pc6",
+					      "lcd_dc1_pd2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd-m1 {
+				nvidia,pins = "lcd_m1_pw1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			key-mode {
+				nvidia,pins = "gmi_cs4_n_pk2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			splashtop {
+				nvidia,pins = "gmi_cs6_n_pi3";
+				nvidia,function = "nand_alt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			w8-detect {
+				nvidia,pins = "gmi_cs7_n_pi6";
+				nvidia,function = "nand_alt";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb7 {
+				nvidia,pins = "pbb7";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			spi2-mosi-px0 {
+				nvidia,pins = "spi2_mosi_px0";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			tp-vendor {
+				nvidia,pins = "kb_row6_pr6",
+					      "kb_row7_pr7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			tp-power {
+				nvidia,pins = "kb_row8_ps0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* GPIO power/drive control */
+			drive-dap1 {
+				nvidia,pins = "drive_dap1",
+					      "drive_dap2",
+					      "drive_dbg",
+					      "drive_at5",
+					      "drive_gme",
+					      "drive_ddc",
+					      "drive_ao1",
+					      "drive_uart3";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+			drive-sdio1 {
+				nvidia,pins = "drive_sdio1",
+					      "drive_sdio3";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <46>;
+				nvidia,pull-up-strength = <42>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FAST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FAST>;
+			};
+		};
+	};
+
+	uartb: serial@70006040 {
+		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
+		status = "okay";
+
+		/* Broadcom GPS BCM47511 */
+	};
+
+	uartc: serial@70006200 {
+		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
+		status = "okay";
+
+		/* Azurewave AW-AH691 BCM43241B0 */
+	};
+
+	pwm: pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <280000>;
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* Nuvoton NPCE791LA0DX embedded controller */
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		accelerometer@f {
+			compatible = "kionix,kxtf9";
+			reg = <0x0f>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(O, 5) IRQ_TYPE_EDGE_RISING>;
+
+			vdd-supply = <&vdd_1v8_vio>;
+			vddio-supply = <&vdd_1v8_vio>;
+
+			mount-matrix = "0", "1", "0",
+				       "1", "0", "0",
+				       "0", "0", "1";
+		};
+	};
+
+	hdmi_ddc: i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <33000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		rt5640: audio-codec@1c {
+			compatible = "realtek,rt5640";
+			reg = <0x1c>;
+
+			realtek,dmic1-data-pin = <1>;
+
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+			clock-names = "mclk";
+
+			realtek,ldo1-en-gpios = <&gpio TEGRA_GPIO(BB, 6) GPIO_ACTIVE_HIGH>;
+		};
+
+		/* Texas Instruments TPS659110 PMIC */
+		pmic: pmic@2d {
+			compatible = "ti,tps65911";
+			reg = <0x2d>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			wakeup-source;
+
+			ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>;
+			ti,system-power-controller;
+			ti,sleep-keep-ck32k;
+			ti,sleep-enable;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			vcc1-supply = <&vdd_5v0_bat>;
+			vcc2-supply = <&vdd_5v0_bat>;
+			vcc3-supply = <&vdd_1v8_vio>;
+			vcc4-supply = <&vdd_5v0_bat>;
+			vcc5-supply = <&vdd_5v0_bat>;
+			vcc6-supply = <&vddio_ddr>;
+			vcc7-supply = <&vdd_5v0_bat>;
+			vccio-supply = <&vdd_5v0_bat>;
+
+			pmic-sleep-hog {
+				gpio-hog;
+				gpios = <2 GPIO_ACTIVE_HIGH>;
+				output-high;
+			};
+
+			regulators {
+				/* vdd1 is not used by Portable AiO */
+
+				vddio_ddr: vdd2 {
+					regulator-name = "vddio_ddr";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_cpu: vddctrl {
+					regulator-name = "vdd_cpu,vdd_sys";
+					regulator-min-microvolt = <600000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-coupled-with = <&vdd_core>;
+					regulator-coupled-max-spread = <300000>;
+					regulator-max-step-microvolt = <100000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ti,regulator-ext-sleep-control = <1>;
+
+					nvidia,tegra-cpu-regulator;
+				};
+
+				vdd_1v8_vio: vio {
+					regulator-name = "vdd_1v8_gen";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				/* eMMC VDD */
+				vcore_emmc: ldo1 {
+					regulator-name = "vdd_emmc_core";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				/* uSD slot VDD */
+				vdd_usd: ldo2 {
+					regulator-name = "vdd_usd";
+					regulator-min-microvolt = <3100000>;
+					regulator-max-microvolt = <3100000>;
+					regulator-always-on;
+				};
+
+				/* uSD slot VDDIO */
+				vddio_usd: ldo3 {
+					regulator-name = "vddio_usd";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3100000>;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				/* ldo5 is not used by Portable AiO */
+
+				ldo6 {
+					regulator-name = "avdd_dsi_csi,pwrdet_mipi";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo7 {
+					regulator-name = "vdd_pllm,x,u,a_p_c_s";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ti,regulator-ext-sleep-control = <8>;
+				};
+
+				ldo8 {
+					regulator-name = "vdd_ddr_hs";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					ti,regulator-ext-sleep-control = <8>;
+				};
+			};
+		};
+
+		nct72: temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_EDGE_FALLING>;
+
+			vcc-supply = <&vdd_3v3_sys>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		vdd_core: core-regulator@60 {
+			compatible = "ti,tps62361";
+			reg = <0x60>;
+
+			regulator-name = "tps62361-vout";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1770000>;
+			regulator-coupled-with = <&vdd_cpu>;
+			regulator-coupled-max-spread = <300000>;
+			regulator-max-step-microvolt = <100000>;
+			regulator-boot-on;
+			regulator-always-on;
+			ti,enable-vout-discharge;
+			ti,vsel0-state-high;
+			ti,vsel1-state-high;
+
+			nvidia,tegra-core-regulator;
+		};
+	};
+
+	vdd_5v0_bat: regulator-bat {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_ac_bat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_5v0_cp: regulator-sby {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_sby";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	vdd_5v0_sys: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	vdd_1v5_ddr: regulator-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_ddr";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	vdd_3v3_sys: regulator-3v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	vdd_3v3_com: regulator-com {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_com";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	usb2_vbus: regulator-usb2 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	hdmi_5v0_sys: regulator-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "hdmi_5v0_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	pmc@7000e400 {
+		status = "okay";
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <2>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <200>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <0>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
+
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <4>;
+			nvidia,bus-addr = <0x2d>;
+			nvidia,reg-addr = <0x3f>;
+			nvidia,reg-data = <0x81>;
+		};
+	};
+
+	memory-controller@7000f000 {
+		emc-timings-3 {
+			/* Micron 2GB 800MHz */
+			nvidia,ram-code = <3>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00030003 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x75830303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010003 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x74630303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000030
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x73c30504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000006 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000003 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0505 0x73840a06 0x001f0000 >;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+
+				nvidia,emem-configuration = < 0x0000000c 0xc0000048
+					0x00000001 0x00000002 0x00000009 0x00000005
+					0x00000005 0x00000001 0x00000002 0x00000008
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000d0709 0x7086120a 0x001f0000 >;
+			};
+
+			timing-800000000 {
+				clock-frequency = <800000000>;
+
+				nvidia,emem-configuration = < 0x00000018 0xc0000090
+					0x00000004 0x00000005 0x00000013 0x0000000c
+					0x0000000b 0x00000002 0x00000003 0x0000000c
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00160d13 0x712c2414 0x001f0000 >;
+			};
+		};
+	};
+
+	memory-controller@7000f400 {
+		emc-timings-3 {
+			/* Micron 2GB 800MHz */
+			nvidia,ram-code = <3>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000006 0x00000000 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x00000009
+					0x0000000b 0x000000c0 0x00000000 0x00000030
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000007 0x00000007
+					0x00000004 0x00000001 0x00000000 0x00000004
+					0x00000005 0x000000c7 0x00000006 0x00000006
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x0000000d 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x00000009
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x0000000e 0x0000000e
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000006
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000004
+					0x0000001a 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x00000009
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x0000001c 0x0000001c
+					0x00000004 0x00000004 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000006
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000009
+					0x00000035 0x00000007 0x00000002 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000006 0x00000004 0x00000009
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000038 0x00000038
+					0x00000004 0x00000007 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000007 0x00000004
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-reset = <0x80000521>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x00000012
+					0x00000066 0x0000000c 0x00000004 0x00000003
+					0x00000008 0x00000002 0x0000000a 0x00000004
+					0x00000004 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x00000bf0 0x00000000 0x000002fc
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000008 0x0000000f 0x0000006c 0x00000200
+					0x00000004 0x0000000c 0x00000000 0x00000004
+					0x00000005 0x00000c30 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007088 0x001d0084
+					0x00008000 0x00044000 0x00044000 0x00044000
+					0x00044000 0x00044000 0x00044000 0x00044000
+					0x00044000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00048000 0x00048000 0x00048000
+					0x00048000 0x000002a0 0x0800013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x0158000c 0xa0f10000 0x00000000
+					0x00000000 0x800018c8 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-800000000 {
+				clock-frequency = <800000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-reset = <0x80000d71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000025
+					0x000000ce 0x0000001a 0x00000009 0x00000005
+					0x0000000d 0x00000004 0x00000013 0x00000009
+					0x00000009 0x00000003 0x00000001 0x00000000
+					0x00000007 0x0000000b 0x00000009 0x0000000b
+					0x00000012 0x00001820 0x00000000 0x00000608
+					0x00000003 0x00000012 0x00000001 0x00000000
+					0x0000000f 0x00000018 0x000000d8 0x00000200
+					0x00000005 0x00000018 0x00000000 0x00000007
+					0x00000008 0x00001860 0x0000000c 0x00000004
+					0x00000000 0x00000000 0x00005088 0xf0070191
+					0x00008000 0x0000c00a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00018000 0x00018000 0x00018000
+					0x00018000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x000002a0 0x0800013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x00f0000c 0xa0f10202 0x00000000
+					0x00000000 0x8000308c 0xe8000000 0xff00ff49 >;
+			};
+		};
+	};
+
+	hda@70030000 {
+		status = "okay";
+	};
+
+	ahub@70080000 {
+		i2s@70080400 { /* i2s1 */
+			status = "okay";
+		};
+
+		/* BT SCO */
+		i2s@70080600 { /* i2s3 */
+			status = "okay";
+		};
+	};
+
+	sdmmc1: mmc@78000000 {
+		status = "okay";
+
+		/* SDR104 mode unsupported yet */
+		max-frequency = <104000000>;
+
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		bus-width = <4>;
+
+		vmmc-supply = <&vdd_usd>;	/* ldo2 */
+		vqmmc-supply = <&vddio_usd>;	/* ldo3 */
+	};
+
+	sdmmc3: mmc@78000400 {
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		keep-power-in-suspend;
+		bus-width = <4>;
+		non-removable;
+
+		mmc-pwrseq = <&brcm_wifi_pwrseq>;
+		vmmc-supply = <&vdd_3v3_com>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+
+		/* Azurewave AW-AH691 BCM43241B0 */
+		wifi@1 {
+			compatible = "brcm,bcm4329-fmac";
+			reg = <1>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host-wake";
+		};
+	};
+
+	sdmmc4: mmc@78000600 {
+		status = "okay";
+		bus-width = <8>;
+
+		non-removable;
+		mmc-ddr-3_3v;
+
+		vmmc-supply = <&vcore_emmc>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+	};
+
+	/* USB via ASUS connector */
+	usb@7d000000 {
+		compatible = "nvidia,tegra30-udc";
+		status = "okay";
+		dr_mode = "peripheral";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		dr_mode = "peripheral";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		vbus-supply = <&vdd_5v0_sys>;
+	};
+
+	/* mini-USB port */
+	usb@7d004000 {
+		status = "okay";
+	};
+
+	usb-phy@7d004000 {
+		status = "okay";
+		vbus-supply = <&usb2_vbus>;
+	};
+
+	/* Full size USB */
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&vdd_5v0_bat>;
+	};
+
+	pad_battery: battery-cell {
+		compatible = "simple-battery";
+		device-chemistry = "lithium-ion-polymer";
+		charge-full-design-microamp-hours = <5136000>;
+		energy-full-design-microwatt-hours = <38000000>;
+		operating-range-celsius = <0 45>;
+	};
+
+	/* Connected to a 18.4" LVDS panel */
+	bridge {
+		compatible = "mstar,tsumu88adt3-lf-1";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				bridge_in: endpoint {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				bridge_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "pmic-oscillator";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		label = "HDMI";
+		type = "a";
+
+		/* low: tablet, high: dock */
+		hpd-gpios = <&gpio TEGRA_GPIO(H, 4) GPIO_ACTIVE_LOW>;
+		ddc-i2c-bus = <&hdmi_ddc>;
+		ddc-en-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&bridge_out>;
+			};
+		};
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu1: cpu@1 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu2: cpu@2 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu3: cpu@3 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(Q, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		switch-docking-station-mode {
+			label = "Mode";
+			gpios = <&gpio TEGRA_GPIO(K, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MODE>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	opp-table-actmon {
+		opp-800000000 {
+			opp-supported-hw = <0x0006>;
+		};
+
+		/delete-node/ opp-900000000;
+	};
+
+	opp-table-emc {
+		opp-800000000-1300 {
+			opp-supported-hw = <0x0006>;
+		};
+
+		/delete-node/ opp-900000000-1350;
+	};
+
+	brcm_wifi_pwrseq: pwrseq-wifi {
+		compatible = "mmc-pwrseq-simple";
+
+		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+		clock-names = "ext_clock";
+
+		reset-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <300>;
+		power-off-delay-us = <300>;
+	};
+
+	sound {
+		compatible = "asus,tegra-audio-rt5640-p1801-t",
+			     "nvidia,tegra-audio-rt5640";
+		nvidia,model = "Asus Portable AiO P1801-T RT5642";
+
+		nvidia,audio-routing =
+			"Headphones", "HPOR",
+			"Headphones", "HPOL",
+			"Speakers", "SPORP",
+			"Speakers", "SPORN",
+			"Speakers", "SPOLP",
+			"Speakers", "SPOLN",
+			"DMIC1", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&rt5640>;
+
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+
+		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA30_CLK_EXTERN1>;
+	};
+
+	thermal-zones {
+		/*
+		 * NCT72 has two sensors:
+		 *
+		 *	0: internal that monitors ambient/skin temperature
+		 *	1: external that is connected to the CPU's diode
+		 *
+		 * Ideally we should use userspace thermal governor,
+		 * but it's a much more complex solution. The "skin"
+		 * zone exists as a simpler solution which prevents
+		 * the Portable AiO from getting too hot from a user's
+		 * tactile perspective. The CPU zone is intended to
+		 * protect silicon from damage.
+		 */
+
+		skin-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct72 0>;
+
+			trips {
+				trip0: skin-alert {
+					/* throttle at 57C until temperature drops to 56.8C */
+					temperature = <57000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip1: skin-crit {
+					/* shut down at 65C */
+					temperature = <65000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&trip0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT
+								  THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct72 1>;
+
+			trips {
+				trip2: cpu-alert {
+					/* throttle at 75C until temperature drops to 74.8C */
+					temperature = <75000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip3: cpu-crit {
+					/* shut down at 90C */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&trip2>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT
+								  THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-asus-tf201.dts b/arch/arm/boot/dts/nvidia/tegra30-asus-tf201.dts
new file mode 100644
index 000000000000..0406c5a69c12
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-tf201.dts
@@ -0,0 +1,644 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-asus-transformer-common.dtsi"
+#include "tegra30-asus-lvds-display.dtsi"
+
+/ {
+	model = "Asus Transformer Prime TF201";
+	compatible = "asus,tf201", "nvidia,tegra30";
+
+	pinmux@70000868 {
+		state_default: pinmux {
+			lcd_pwr2_pc6 {
+				nvidia,pins = "lcd_pwr2_pc6",
+						"lcd_dc1_pd2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pbb7 {
+				nvidia,pins = "pbb7";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_cs4_n_pk2 {
+				nvidia,pins = "gmi_cs4_n_pk2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+		};
+	};
+
+	serial@70006200 {
+		/* Azurewave AW-NH615 BCM4329B1 */
+		bluetooth {
+			compatible = "brcm,bcm4329-bt";
+		};
+	};
+
+	i2c@7000c400 {
+		/* Atmel MXT768E touchscreen */
+		touchscreen@4d {
+			compatible = "atmel,maxtouch";
+			reg = <0x4d>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&gpio TEGRA_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+
+			vdda-supply = <&vdd_3v3_sys>;
+			vdd-supply  = <&vdd_3v3_sys>;
+		};
+	};
+
+	i2c@7000c500 {
+		clock-frequency = <100000>;
+
+		magnetometer@e {
+			mount-matrix =  "-1",  "0",  "0",
+					 "0", "-1",  "0",
+					 "0",  "0", "-1";
+		};
+
+		gyroscope@68 {
+			mount-matrix =   "0", "-1",  "0",
+					"-1",  "0",  "0",
+					 "0",  "0", "-1";
+
+			/* External I2C interface */
+			i2c-gate {
+				accelerometer@f {
+					mount-matrix =   "1",  "0",  "0",
+							 "0", "-1",  "0",
+							 "0",  "0",  "1";
+				};
+			};
+		};
+	};
+
+	i2c@7000d000 {
+		/* Realtek ALC5631 audio codec */
+		rt5631: audio-codec@1a {
+			compatible = "realtek,rt5631";
+			reg = <0x1a>;
+		};
+	};
+
+	memory-controller@7000f000 {
+		emc-timings-0 {
+			/* Elpida 1GB EDB8132B2MA-8D-F LPDDR2 400MHz */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0x80000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x73e30303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0x80000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x72c30303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0x80000018
+					0x00000001 0x00000001 0x00000003 0x00000001
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060403 0x72430504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0x80000025
+					0x00000001 0x00000001 0x00000006 0x00000003
+					0x00000005 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000003 0x00000002
+					0x02030001 0x00070506 0x71e40a07 0x001f0000 >;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+
+				nvidia,emem-configuration = < 0x00000006 0x80000048
+					0x00000002 0x00000003 0x0000000c 0x00000007
+					0x00000009 0x00000001 0x00000002 0x00000006
+					0x00000001 0x00000000 0x00000004 0x00000004
+					0x04040001 0x000d090c 0x71c6120d 0x001f0000 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* TF201 Unknown 1GB LPDDR2 500MHZ */
+			nvidia,ram-code = <1>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0x80000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x73e30303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0x80000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x72c30303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0x80000018
+					0x00000001 0x00000001 0x00000003 0x00000001
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060403 0x72430504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0x80000025
+					0x00000001 0x00000001 0x00000006 0x00000003
+					0x00000005 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000003 0x00000002
+					0x02030001 0x00070506 0x71e40a07 0x001f0000 >;
+			};
+
+			timing-500000000 {
+				clock-frequency = <500000000>;
+
+				nvidia,emem-configuration = < 0x00000007 0x8000005a
+					0x00000003 0x00000004 0x0000000e 0x00000009
+					0x0000000c 0x00000002 0x00000002 0x00000008
+					0x00000001 0x00000000 0x00000004 0x00000005
+					0x05040001 0x00100a0e 0x71c8170f 0x001f0000 >;
+			};
+		};
+	};
+
+	memory-controller@7000f400 {
+		emc-timings-0 {
+			/* Elpida 1GB EDB8132B2MA-8D-F LPDDR2 400MHz */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000003 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x0000000a 0x00000060 0x00000000 0x00000018
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000004 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x0000006b 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x00780084
+					0x00008000 0x00098000 0x00098000 0x00098000
+					0x00098000 0x00000010 0x00000010 0x00000010
+					0x00000010 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000008 0x00000008 0x00000008
+					0x00000008 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00000000
+					0x00000009 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x800001c5 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000003
+					0x00000006 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x0000000a 0x000000c0 0x00000000 0x00000030
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000008 0x00000008
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000000d5 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x00780084
+					0x00008000 0x00098000 0x00098000 0x00098000
+					0x00098000 0x00000010 0x00000010 0x00000010
+					0x00000010 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000018 0x00000018 0x00000018
+					0x00000018 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00000000
+					0x00000009 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x0000000a>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000006
+					0x0000000d 0x00000004 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x0000000a 0x00000181 0x00000000 0x00000060
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x0000000f 0x0000000f
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000001a9 0x00000004 0x00000006
+					0x00000000 0x00000000 0x00004282 0x00780084
+					0x00008000 0x000a0000 0x000a0000 0x000a0000
+					0x000a0000 0x00000010 0x00000010 0x00000010
+					0x00000010 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000008 0x00000008 0x00000008
+					0x00000008 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00120220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00000000
+					0x0000000a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010042>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000013>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000c
+					0x0000001a 0x00000008 0x00000003 0x00000005
+					0x00000004 0x00000001 0x00000006 0x00000003
+					0x00000003 0x00000002 0x00000002 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000c
+					0x0000000a 0x00000303 0x00000000 0x000000c0
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000007 0x0000001d 0x0000001d
+					0x00000004 0x0000000b 0x00000005 0x00000004
+					0x00000002 0x00000351 0x00000004 0x00000006
+					0x00000000 0x00000000 0x00004282 0x00440084
+					0x00008000 0x00074000 0x00074000 0x00074000
+					0x00074000 0x00000010 0x00000010 0x00000010
+					0x00000010 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000018 0x00000018 0x00000018
+					0x00000018 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00078000 0x00078000 0x00078000
+					0x00078000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00000000
+					0x00000013 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010082>;
+				nvidia,emc-mode-2 = <0x00020004>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000024>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000017
+					0x00000033 0x00000010 0x00000007 0x00000007
+					0x00000007 0x00000002 0x0000000a 0x00000007
+					0x00000007 0x00000003 0x00000002 0x00000000
+					0x00000003 0x00000007 0x00000004 0x0000000d
+					0x0000000e 0x000005e9 0x00000000 0x0000017a
+					0x00000002 0x00000002 0x00000007 0x00000000
+					0x00000001 0x0000000c 0x00000038 0x00000038
+					0x00000006 0x00000014 0x00000009 0x00000004
+					0x00000002 0x00000680 0x00000000 0x00000006
+					0x00000000 0x00000000 0x00006282 0x001d0084
+					0x00008000 0x0002c000 0x0002c000 0x0002c000
+					0x0002c000 0x00000010 0x00000010 0x00000010
+					0x00000010 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000008 0x00000008 0x00000008
+					0x00000008 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00048000 0x00048000 0x00048000
+					0x00048000 0x000c0220 0x0800003d 0x00000000
+					0x77ffc004 0x01f1f408 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00000000
+					0x00000024 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000ce6 0xe0000000 0xff00ff88 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* TF201 Unknown 1GB LPDDR2 500MHZ */
+			nvidia,ram-code = <1>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000003 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x00000060 0x00000000 0x00000018
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000004 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x0000006b 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x00780084
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000000a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x800001c5 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000003
+					0x00000006 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x000000c0 0x00000000 0x00000030
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000008 0x00000008
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000000d5 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x00780084
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000013 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x0000000a>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000006
+					0x0000000d 0x00000004 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x00000181 0x00000000 0x00000060
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x0000000f 0x0000000f
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000001a9 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x00780084
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000025 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010042>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000013>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000c
+					0x0000001a 0x00000008 0x00000003 0x00000005
+					0x00000004 0x00000001 0x00000006 0x00000003
+					0x00000003 0x00000002 0x00000002 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000c
+					0x0000000a 0x00000303 0x00000000 0x000000c0
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000007 0x0000001d 0x0000001d
+					0x00000004 0x0000000b 0x00000005 0x00000004
+					0x00000002 0x00000351 0x00000004 0x00000006
+					0x00000000 0x00000000 0x00004282 0x00440084
+					0x00008000 0x00060000 0x00060000 0x00060000
+					0x00060000 0x00072000 0x00072000 0x00072000
+					0x00072000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000d0000 0x000d0000 0x000d0000
+					0x000d0000 0x000e0220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000004a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-500000000 {
+				clock-frequency = <500000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x000100c2>;
+				nvidia,emc-mode-2 = <0x00020005>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x0000002d>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000001d
+					0x00000040 0x00000014 0x00000008 0x00000007
+					0x00000009 0x00000003 0x0000000d 0x00000008
+					0x00000008 0x00000004 0x00000002 0x00000000
+					0x00000004 0x00000008 0x00000005 0x0000000d
+					0x0000000f 0x00000763 0x00000000 0x000001d8
+					0x00000003 0x00000003 0x00000008 0x00000000
+					0x00000001 0x0000000e 0x00000046 0x00000046
+					0x00000008 0x00000019 0x0000000b 0x00000004
+					0x00000002 0x00000820 0x00000000 0x00000006
+					0x00000000 0x00000000 0x00006282 0xf0140091
+					0x00008000 0x00000008 0x00000008 0x00000008
+					0x00000008 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000c 0x0000000c 0x0000000c
+					0x0000000c 0x00080220 0x0800003d 0x00000000
+					0x77ffc004 0x01f1f408 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x000000b4 0x000d000d 0xa0f10404 0x00000000
+					0x00000000 0x80000fde 0xe0000000 0xff00ff88 >;
+			};
+		};
+	};
+
+	usb-phy@7d000000 {
+		/delete-property/ nvidia,xcvr-setup-use-fuses;
+		nvidia,xcvr-setup = <5>;      /* Based on TF201 fuse value - 48 */
+	};
+
+	usb-phy@7d008000 {
+		/delete-property/ nvidia,xcvr-setup-use-fuses;
+		nvidia,xcvr-setup = <5>;      /* Based on TF201 fuse value - 48 */
+	};
+
+	display-panel {
+		compatible = "hannstar,hsd101pww2";
+	};
+
+	haptic-feedback {
+		compatible = "gpio-vibrator";
+		enable-gpios = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
+		vcc-supply = <&vdd_3v3_sys>;
+	};
+
+	opp-table-actmon {
+		/delete-node/ opp-533000000;
+		/delete-node/ opp-625000000;
+		/delete-node/ opp-667000000;
+		/delete-node/ opp-750000000;
+		/delete-node/ opp-800000000;
+		/delete-node/ opp-900000000;
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-533000000-1200;
+		/delete-node/ opp-625000000-1200;
+		/delete-node/ opp-625000000-1250;
+		/delete-node/ opp-667000000-1200;
+		/delete-node/ opp-750000000-1300;
+		/delete-node/ opp-800000000-1300;
+		/delete-node/ opp-900000000-1350;
+	};
+
+	sound {
+		compatible = "asus,tegra-audio-rt5631-tf201",
+			     "nvidia,tegra-audio-rt5631";
+		nvidia,model = "Asus Transformer Prime TF201 RT5631";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOL",
+			"Headphone Jack", "HPOR",
+			"Int Spk", "SPOL",
+			"Int Spk", "SPOR",
+			"MIC1", "MIC Bias1",
+			"MIC Bias1", "Mic Jack",
+			"DMIC", "Int Mic";
+
+		nvidia,audio-codec = <&rt5631>;
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-asus-tf300t.dts b/arch/arm/boot/dts/nvidia/tegra30-asus-tf300t.dts
new file mode 100644
index 000000000000..970a1f08dc8c
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-tf300t.dts
@@ -0,0 +1,1032 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-asus-transformer-common.dtsi"
+#include "tegra30-asus-lvds-display.dtsi"
+
+/ {
+	model = "Asus Transformer Pad TF300T";
+	compatible = "asus,tf300t", "nvidia,tegra30";
+
+	gpio@6000d000 {
+		tf300t-init-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(BB, 5) GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
+	};
+
+	pinmux@70000868 {
+		state_default: pinmux {
+			lcd_pwr2_pc6 {
+				nvidia,pins = "lcd_pwr2_pc6",
+						"lcd_dc1_pd2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pbb7 {
+				nvidia,pins = "pbb7";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_cs4_n_pk2 {
+				nvidia,pins = "gmi_cs4_n_pk2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+		};
+	};
+
+	serial@70006200 {
+		/* Azurewave AW-NH615 BCM4329B1 */
+		bluetooth {
+			compatible = "brcm,bcm4329-bt";
+		};
+	};
+
+	i2c@7000c400 {
+		/* Elantech EKTH1036 touchscreen */
+		touchscreen@10 {
+			compatible = "elan,ektf3624";
+			reg = <0x10>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&gpio TEGRA_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+
+			vcc33-supply = <&vdd_3v3_sys>;
+			vccio-supply = <&vdd_3v3_sys>;
+
+			touchscreen-size-x = <2240>;
+			touchscreen-size-y = <1408>;
+			touchscreen-inverted-y;
+		};
+	};
+
+	i2c@7000c500 {
+		clock-frequency = <400000>;
+
+		magnetometer@e {
+			mount-matrix =   "0", "-1",  "0",
+					"-1",  "0",  "0",
+					 "0",  "0", "-1";
+		};
+
+		gyroscope@68 {
+			mount-matrix =   "-1",  "0",  "0",
+					  "0",  "1",  "0",
+					  "0",  "0", "-1";
+
+			/* External I2C interface */
+			i2c-gate {
+				accelerometer@f {
+					mount-matrix =   "0", "-1",  "0",
+							"-1",  "0",  "0",
+							 "0",  "0",  "1";
+				};
+			};
+		};
+	};
+
+	i2c@7000d000 {
+		/* Wolfson Microelectronics WM8903 audio codec */
+		wm8903: audio-codec@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_LOW>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0>;
+			micdet-delay = <100>;
+
+			gpio-cfg = <
+				0x00000600 /* DMIC_LR, output */
+				0x00000680 /* DMIC_DAT, input */
+				0x00000000 /* Speaker-enable GPIO, output, low */
+				0xffffffff /* don't touch */
+				0xffffffff /* don't touch */
+			>;
+
+			AVDD-supply  = <&vdd_1v8_vio>;
+			CPVDD-supply = <&vdd_1v8_vio>;
+			DBVDD-supply = <&vdd_1v8_vio>;
+			DCVDD-supply = <&vdd_1v8_vio>;
+		};
+	};
+
+	memory-controller@7000f000 {
+		emc-timings-0 {
+			/* Elpida 1GB 667MHZ */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00030003 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x74830303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010003 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x73430303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000030
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x72830504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000006 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000003 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0505 0x72440a06 0x001f0000 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emem-configuration = < 0x0000000a 0xc000003d
+					0x00000001 0x00000002 0x00000008 0x00000004
+					0x00000004 0x00000001 0x00000002 0x00000007
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000b0608 0x70850f09 0x001f0000 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emem-configuration = < 0x00000014 0xc0000079
+					0x00000003 0x00000004 0x00000010 0x0000000b
+					0x0000000a 0x00000001 0x00000003 0x0000000b
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00130b10 0x70ea1f11 0x001f0000 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* Hynix 1GB 667MHZ */
+			nvidia,ram-code = <1>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00030003 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x74830303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010003 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x73430303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000030
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x72830504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000006 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000003 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0605 0x72440a06 0x001f0000 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emem-configuration = < 0x0000000a 0xc000003d
+					0x00000001 0x00000002 0x00000008 0x00000005
+					0x00000004 0x00000001 0x00000002 0x00000007
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000b0608 0x70850f09 0x001f0000 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emem-configuration = < 0x00000014 0xc0000079
+					0x00000003 0x00000004 0x00000011 0x0000000b
+					0x0000000a 0x00000001 0x00000003 0x0000000b
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00140b11 0x70ea1f12 0x001f0000 >;
+			};
+		};
+
+		emc-timings-2 {
+			/* Micron 1GB 667MHZ */
+			nvidia,ram-code = <2>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x74830303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x73430303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000030
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x72830504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000003 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0505 0x72440a06 0x001f0000 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emem-configuration = < 0x00000005 0xc000003d
+					0x00000001 0x00000002 0x00000008 0x00000004
+					0x00000004 0x00000001 0x00000002 0x00000007
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000b0608 0x70850f09 0x001f0000 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emem-configuration = < 0x0000000a 0xc0000079
+					0x00000003 0x00000004 0x00000010 0x0000000a
+					0x0000000a 0x00000001 0x00000003 0x0000000b
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00140b10 0x70ea1f11 0x001f0000 >;
+			};
+		};
+	};
+
+	memory-controller@7000f400 {
+		emc-timings-0 {
+			/* Elpida 1GB 667MHZ */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000004 0x00000000 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x00000009
+					0x0000000b 0x000000c0 0x00000000 0x00000030
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000005 0x00000005
+					0x00000004 0x00000001 0x00000000 0x00000004
+					0x00000005 0x000000c7 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x00000008 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x00000009
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000009 0x00000009
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000004
+					0x00000010 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x00000009
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000012 0x00000012
+					0x00000004 0x00000004 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000a
+					0x00000020 0x00000007 0x00000002 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x00000009
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000023 0x00000023
+					0x00000004 0x00000007 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000006 0x00000006
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x0000000f
+					0x00000034 0x0000000a 0x00000003 0x00000003
+					0x00000008 0x00000002 0x00000009 0x00000003
+					0x00000003 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x000009e9 0x00000000 0x0000027a
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000007 0x0000000e 0x00000039 0x00000200
+					0x00000004 0x0000000a 0x00000000 0x00000004
+					0x00000005 0x00000a2a 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007088 0x002600a4
+					0x00008000 0x0003c000 0x0003c000 0x0003c000
+					0x0003c000 0x00014000 0x00014000 0x00014000
+					0x00014000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00048000 0x00048000 0x00048000
+					0x00048000 0x000002a0 0x0800013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x018b000c 0xa0f10000 0x00000000
+					0x00000000 0x800014d4 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-reset = <0x80000b71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000001f
+					0x00000069 0x00000017 0x00000007 0x00000005
+					0x0000000c 0x00000003 0x00000011 0x00000007
+					0x00000007 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000a 0x00000009 0x0000000a
+					0x00000011 0x00001412 0x00000000 0x00000504
+					0x00000002 0x0000000e 0x00000001 0x00000000
+					0x0000000c 0x00000016 0x00000072 0x00000200
+					0x00000005 0x00000015 0x00000000 0x00000006
+					0x00000007 0x00001453 0x0000000b 0x00000006
+					0x00000000 0x00000000 0x00005088 0xf00b0191
+					0x00008000 0x00000008 0x00000008 0x00000008
+					0x00000008 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x000002a0 0x0800013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x0f000021 0x00000802 0x00020000
+					0x00000100 0x0156000c 0xa0f10000 0x00000000
+					0x00000000 0x800028a5 0xe8000000 0xff00ff49 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* Hynix 1GB 667MHZ */
+			nvidia,ram-code = <1>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000004 0x00000000 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x00000009
+					0x0000000b 0x000000c0 0x00000000 0x00000030
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000005 0x00000005
+					0x00000004 0x00000001 0x00000000 0x00000004
+					0x00000005 0x000000c7 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x00000008 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x00000009
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000009 0x00000009
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000005
+					0x00000010 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x00000009
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000012 0x00000012
+					0x00000004 0x00000004 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000a
+					0x00000020 0x00000007 0x00000003 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x00000009
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000023 0x00000023
+					0x00000004 0x00000007 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000006 0x00000006
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x0000000f
+					0x00000034 0x0000000b 0x00000003 0x00000003
+					0x00000008 0x00000002 0x00000009 0x00000003
+					0x00000003 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x000009e9 0x00000000 0x0000027a
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000007 0x0000000e 0x00000039 0x00000200
+					0x00000004 0x0000000a 0x00000000 0x00000004
+					0x00000005 0x00000a2a 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007088 0x002600a4
+					0x00008000 0x0003c000 0x0003c000 0x0003c000
+					0x0003c000 0x00014000 0x00014000 0x00014000
+					0x00014000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00048000 0x00048000 0x00048000
+					0x00048000 0x000002a0 0x0800013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x018b000c 0xa0f10000 0x00000000
+					0x00000000 0x800014d4 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-reset = <0x80000b71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000020
+					0x0000006a 0x00000018 0x00000008 0x00000005
+					0x0000000c 0x00000003 0x00000011 0x00000007
+					0x00000007 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000a 0x00000009 0x0000000a
+					0x00000011 0x00001412 0x00000000 0x00000504
+					0x00000002 0x0000000e 0x00000001 0x00000000
+					0x0000000c 0x00000016 0x00000072 0x00000200
+					0x00000005 0x00000015 0x00000000 0x00000006
+					0x00000007 0x00001453 0x0000000b 0x00000006
+					0x00000000 0x00000000 0x00005088 0xf00b0191
+					0x00008000 0x00000008 0x00000008 0x00000008
+					0x00000008 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000c 0x0000000c 0x0000000c
+					0x0000000c 0x000002a0 0x0800013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x0155000c 0xa0f10000 0x00000000
+					0x00000000 0x800028a5 0xe8000000 0xff00ff49 >;
+			};
+		};
+
+		emc-timings-2 {
+			/* Micron 1GB 667MHZ */
+			nvidia,ram-code = <2>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000004 0x00000000 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x00000009
+					0x0000000b 0x000000c0 0x00000000 0x00000030
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000005 0x00000005
+					0x00000004 0x00000001 0x00000000 0x00000004
+					0x00000005 0x000000c7 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x00000008 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x00000009
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000009 0x00000009
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000004
+					0x00000010 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000012 0x00000012
+					0x00000004 0x00000004 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xd8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000009
+					0x00000020 0x00000007 0x00000002 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000023 0x00000023
+					0x00000004 0x00000007 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000006 0x00000006
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xd8000000 0xff00ff00 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200040>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x0000000f
+					0x00000034 0x0000000a 0x00000003 0x00000003
+					0x00000008 0x00000002 0x00000009 0x00000003
+					0x00000003 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x000009e9 0x00000000 0x0000027a
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000007 0x0000000e 0x00000039 0x00000200
+					0x00000004 0x0000000a 0x00000000 0x00000004
+					0x00000005 0x00000a2a 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007088 0x002600a4
+					0x00008000 0x0003c000 0x0003c000 0x0003c000
+					0x0003c000 0x00014000 0x00014000 0x00014000
+					0x00014000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00048000 0x00048000 0x00048000
+					0x00048000 0x000002a0 0x0800013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x018b000c 0xa0f10000 0x00000000
+					0x00000000 0x800014d4 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200058>;
+				nvidia,emc-mode-reset = <0x80000b71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000001f
+					0x00000069 0x00000016 0x00000007 0x00000005
+					0x0000000c 0x00000003 0x00000011 0x00000008
+					0x00000008 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000a 0x00000009 0x0000000b
+					0x00000011 0x00001412 0x00000000 0x00000504
+					0x00000002 0x0000000e 0x00000001 0x00000000
+					0x0000000c 0x00000016 0x00000072 0x00000200
+					0x00000005 0x00000015 0x00000000 0x00000006
+					0x00000007 0x00001453 0x0000000b 0x00000006
+					0x00000000 0x00000000 0x00005088 0xf00b0191
+					0x00008000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000c 0x0000000c 0x0000000c
+					0x0000000c 0x000002a0 0x0800013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x0156000c 0xa0f10000 0x00000000
+					0x00000000 0x800028a5 0xf8000000 0xff00ff49 >;
+			};
+		};
+	};
+
+	display-panel {
+		compatible = "innolux,g101ice-l01";
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-750000000-1300;
+		/delete-node/ opp-800000000-1300;
+		/delete-node/ opp-900000000-1350;
+	};
+
+	opp-table-actmon {
+		/delete-node/ opp-750000000;
+		/delete-node/ opp-800000000;
+		/delete-node/ opp-900000000;
+	};
+
+	sound {
+		compatible = "asus,tegra-audio-wm8903-tf300t",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "Asus Transformer Pad TF300T WM8903";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"IN2L", "Mic Jack",
+			"DMICDAT", "Int Mic";
+
+		nvidia,audio-codec = <&wm8903>;
+		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-asus-tf300tg.dts b/arch/arm/boot/dts/nvidia/tegra30-asus-tf300tg.dts
new file mode 100644
index 000000000000..4861db8e1e59
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-tf300tg.dts
@@ -0,0 +1,1104 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-asus-transformer-common.dtsi"
+#include "tegra30-asus-lvds-display.dtsi"
+
+/ {
+	model = "Asus Transformer Pad 3G TF300TG";
+	compatible = "asus,tf300tg", "nvidia,tegra30";
+
+	gpio@6000d000 {
+		tf300tg-init-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(D, 2) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(P, 1) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(X, 5) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(R, 3) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(U, 5) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(X, 0) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(Y, 2) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(Y, 3) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(EE, 1) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(U, 3) GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
+	};
+
+	pinmux@70000868 {
+		state_default: pinmux {
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pbb7 {
+				nvidia,pins = "pbb7";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_cs4_n_pk2 {
+				nvidia,pins = "gmi_cs4_n_pk2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			lcd_pwr2_pc6 {
+				nvidia,pins = "lcd_pwr2_pc6",
+						"lcd_dc1_pd2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spi2_cs2_n_pw3 {
+				nvidia,pins = "spi2_cs2_n_pw3";
+				nvidia,function = "spi2";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			dap3_din_pp1 {
+				nvidia,pins = "dap3_din_pp1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spi1_sck_px5 {
+				nvidia,pins = "spi1_sck_px5";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pu5 {
+				nvidia,pins = "pu5";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			spi2_mosi_px0 {
+				nvidia,pins = "spi2_mosi_px0";
+				nvidia,function = "spi2";
+			};
+
+			spi1_miso_px7 {
+				nvidia,pins = "spi1_miso_px7";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk3_req_pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "dev3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ulpi_nxt_py2 {
+				nvidia,pins = "ulpi_nxt_py2";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ulpi_stp_py3 {
+				nvidia,pins = "ulpi_stp_py3";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			dap1_din_pn1 {
+				nvidia,pins = "dap1_din_pn1";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+
+	serial@70006200 {
+		/* Azurewave AW-NH615 BCM4329B1 */
+		bluetooth {
+			compatible = "brcm,bcm4329-bt";
+		};
+	};
+
+	i2c@7000c400 {
+		/* Elantech EKTH1036 touchscreen */
+		touchscreen@10 {
+			compatible = "elan,ektf3624";
+			reg = <0x10>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&gpio TEGRA_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+
+			vcc33-supply = <&vdd_3v3_sys>;
+			vccio-supply = <&vdd_3v3_sys>;
+
+			touchscreen-size-x = <2240>;
+			touchscreen-size-y = <1408>;
+			touchscreen-inverted-y;
+		};
+	};
+
+	i2c@7000c500 {
+		clock-frequency = <400000>;
+
+		magnetometer@e {
+			mount-matrix =   "1",  "0",  "0",
+					 "0", "-1",  "0",
+					 "0",  "0", "-1";
+		};
+
+		gyroscope@68 {
+			mount-matrix =   "-1",  "0",  "0",
+					  "0",  "1",  "0",
+					  "0",  "0", "-1";
+
+			/* External I2C interface */
+			i2c-gate {
+				accelerometer@f {
+					mount-matrix =   "0", "-1",  "0",
+							"-1",  "0",  "0",
+							 "0",  "0",  "1";
+				};
+			};
+		};
+	};
+
+	i2c@7000d000 {
+		/* Realtek ALC5631 audio codec */
+		rt5631: audio-codec@1a {
+			compatible = "realtek,rt5631";
+			reg = <0x1a>;
+		};
+	};
+
+	memory-controller@7000f000 {
+		emc-timings-0 {
+			/* Elpida 1GB 667MHZ */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x74830303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x73430303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000030
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x72830504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000003 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0505 0x72440a06 0x001f0000 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emem-configuration = < 0x00000005 0xc000003d
+					0x00000001 0x00000002 0x00000008 0x00000004
+					0x00000004 0x00000001 0x00000002 0x00000007
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000b0608 0x70850f09 0x001f0000 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emem-configuration = < 0x0000000a 0xc0000079
+					0x00000003 0x00000004 0x00000010 0x0000000b
+					0x0000000a 0x00000001 0x00000003 0x0000000b
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00130b10 0x70ea1f11 0x001f0000 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* Hynix 1GB 667MHZ */
+			nvidia,ram-code = <1>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x74830303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x73430303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000030
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x72830504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000003 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0505 0x72440a06 0x001f0000 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emem-configuration = < 0x00000005 0xc000003d
+					0x00000001 0x00000002 0x00000008 0x00000004
+					0x00000004 0x00000001 0x00000002 0x00000007
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000b0608 0x70850f09 0x001f0000 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emem-configuration = < 0x0000000a 0xc0000079
+					0x00000003 0x00000004 0x00000010 0x0000000b
+					0x0000000a 0x00000001 0x00000003 0x0000000b
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00130b10 0x70ea1f11 0x001f0000 >;
+			};
+		};
+
+		emc-timings-2 {
+			/* Micron 1GB 667MHZ */
+			nvidia,ram-code = <2>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x74830303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x73430303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000030
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x72830504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000003 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0505 0x72440a06 0x001f0000 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emem-configuration = < 0x00000005 0x8000003d
+					0x00000001 0x00000002 0x00000008 0x00000004
+					0x00000004 0x00000001 0x00000002 0x00000007
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000b0608 0x70850f09 0x001f0000 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emem-configuration = < 0x0000000a 0x80000079
+					0x00000003 0x00000004 0x00000010 0x0000000a
+					0x0000000a 0x00000001 0x00000003 0x0000000b
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00130b10 0x70ea1f11 0x001f0000 >;
+			};
+		};
+	};
+
+	memory-controller@7000f400 {
+		emc-timings-0 {
+			/* Elpida 1GB 667MHZ */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000004 0x00000000 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x000000c0 0x00000000 0x00000030
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000005 0x00000005
+					0x00000004 0x00000001 0x00000000 0x00000004
+					0x00000005 0x000000c7 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x00000008 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000009 0x00000009
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000005
+					0x00000010 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000012 0x00000012
+					0x00000004 0x00000004 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000a
+					0x00000020 0x00000007 0x00000002 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000006 0x00000004 0x0000000a
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000023 0x00000023
+					0x00000004 0x00000007 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000007 0x00000004
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200040>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x0000000f
+					0x00000034 0x0000000a 0x00000003 0x00000003
+					0x00000008 0x00000002 0x00000009 0x00000003
+					0x00000003 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x000009e9 0x00000000 0x0000027a
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000007 0x0000000e 0x00000039 0x00000200
+					0x00000004 0x0000000a 0x00000000 0x00000004
+					0x00000005 0x00000a2a 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007088 0x002600a4
+					0x00008000 0x0003c000 0x0003c000 0x0003c000
+					0x0003c000 0x00014000 0x00014000 0x00014000
+					0x00014000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00050000 0x00050000 0x00050000
+					0x00050000 0x000002a0 0x0800013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x018b000c 0xa0f10000 0x00000000
+					0x00000000 0x800014d4 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200058>;
+				nvidia,emc-mode-reset = <0x80000b71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000001f
+					0x00000069 0x00000017 0x00000007 0x00000005
+					0x0000000c 0x00000003 0x00000011 0x00000007
+					0x00000007 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000b 0x00000009 0x0000000b
+					0x00000011 0x00001412 0x00000000 0x00000504
+					0x00000002 0x0000000e 0x00000001 0x00000000
+					0x0000000c 0x00000016 0x00000072 0x00000200
+					0x00000005 0x00000015 0x00000000 0x00000006
+					0x00000007 0x00001453 0x0000000c 0x00000004
+					0x00000000 0x00000000 0x00005088 0xf00b0191
+					0x00008000 0x0000000c 0x0000000c 0x0000000c
+					0x0000000c 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00018000 0x00018000 0x00018000
+					0x00018000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000c 0x0000000c 0x0000000c
+					0x0000000c 0x000002a0 0x0a00013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x0a000021 0x00000802 0x00020000
+					0x00000100 0x0156000c 0xa0f10000 0x00000000
+					0x00000000 0x800028a5 0xe8000000 0xff00ff49 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* Hynix 1GB 667MHZ */
+			nvidia,ram-code = <1>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000004 0x00000000 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x000000c0 0x00000000 0x00000030
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000005 0x00000005
+					0x00000004 0x00000001 0x00000000 0x00000004
+					0x00000005 0x000000c7 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x00000008 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000009 0x00000009
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000005
+					0x00000010 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000012 0x00000012
+					0x00000004 0x00000004 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000a
+					0x00000020 0x00000007 0x00000002 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000006 0x00000004 0x0000000a
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000023 0x00000023
+					0x00000004 0x00000007 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000007 0x00000004
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200040>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x0000000f
+					0x00000034 0x0000000a 0x00000003 0x00000003
+					0x00000008 0x00000002 0x00000009 0x00000003
+					0x00000003 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x000009e9 0x00000000 0x0000027a
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000007 0x0000000e 0x00000039 0x00000200
+					0x00000004 0x0000000a 0x00000000 0x00000004
+					0x00000005 0x00000a2a 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007088 0x002600a4
+					0x00008000 0x0003c000 0x0003c000 0x0003c000
+					0x0003c000 0x00014000 0x00014000 0x00014000
+					0x00014000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00048000 0x00048000 0x00048000
+					0x00048000 0x000002a0 0x0800013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x018b000c 0xa0f10000 0x00000000
+					0x00000000 0x800014d4 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200058>;
+				nvidia,emc-mode-reset = <0x80000b71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000020
+					0x00000069 0x00000017 0x00000007 0x00000005
+					0x0000000c 0x00000003 0x00000011 0x00000007
+					0x00000007 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000b 0x00000009 0x0000000b
+					0x00000011 0x00001412 0x00000000 0x00000504
+					0x00000002 0x0000000e 0x00000001 0x00000000
+					0x0000000c 0x00000016 0x00000072 0x00000200
+					0x00000005 0x00000015 0x00000000 0x00000006
+					0x00000007 0x00001453 0x0000000c 0x00000004
+					0x00000000 0x00000000 0x00005088 0xf00b0191
+					0x00008000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00018000 0x00018000 0x00018000
+					0x00018000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x000002a0 0x0800013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x0156000c 0xa0f10000 0x00000000
+					0x00000000 0x800028a5 0xe8000000 0xff00ff49 >;
+			};
+		};
+
+		emc-timings-2 {
+			/* Micron 1GB 667MHZ */
+			nvidia,ram-code = <2>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000004 0x00000000 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x000000c0 0x00000000 0x00000030
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000005 0x00000005
+					0x00000004 0x00000001 0x00000000 0x00000004
+					0x00000005 0x000000c7 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x00000008 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000009 0x00000009
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000004
+					0x00000010 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000012 0x00000012
+					0x00000004 0x00000004 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000009
+					0x00000020 0x00000007 0x00000002 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000006 0x00000004 0x0000000a
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000023 0x00000023
+					0x00000004 0x00000007 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000007 0x00000004
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x0000000f
+					0x00000034 0x0000000a 0x00000003 0x00000003
+					0x00000008 0x00000002 0x00000009 0x00000003
+					0x00000003 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x000009e9 0x00000000 0x0000027a
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000007 0x0000000e 0x00000039 0x00000200
+					0x00000004 0x0000000a 0x00000000 0x00000004
+					0x00000005 0x00000a2a 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007088 0x002600a4
+					0x00008000 0x0003c000 0x0003c000 0x0003c000
+					0x0003c000 0x00014000 0x00014000 0x00014000
+					0x00014000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00040000 0x00040000 0x00040000
+					0x00040000 0x000002a0 0x0800013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x018b000c 0xa0f10000 0x00000000
+					0x00000000 0x800014d4 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-reset = <0x80000b71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000001f
+					0x00000069 0x00000016 0x00000007 0x00000005
+					0x0000000c 0x00000003 0x00000011 0x00000007
+					0x00000007 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000b 0x00000009 0x0000000b
+					0x00000011 0x00001412 0x00000000 0x00000504
+					0x00000002 0x0000000e 0x00000001 0x00000000
+					0x0000000c 0x00000016 0x00000072 0x00000200
+					0x00000005 0x00000015 0x00000000 0x00000006
+					0x00000007 0x00001453 0x0000000c 0x00000004
+					0x00000000 0x00000000 0x00005088 0xf00b0191
+					0x00008000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x000002a0 0x0600013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x0156000c 0xa0f10000 0x00000000
+					0x00000000 0x800028a5 0xe8000000 0xff00ff49 >;
+			};
+		};
+	};
+
+	display-panel {
+		compatible = "innolux,g101ice-l01";
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-750000000-1300;
+		/delete-node/ opp-800000000-1300;
+		/delete-node/ opp-900000000-1350;
+	};
+
+	opp-table-actmon {
+		/delete-node/ opp-750000000;
+		/delete-node/ opp-800000000;
+		/delete-node/ opp-900000000;
+	};
+
+	sound {
+		compatible = "asus,tegra-audio-rt5631-tf300tg",
+			     "nvidia,tegra-audio-rt5631";
+		nvidia,model = "Asus Transformer Pad TF300TG RT5631";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOL",
+			"Headphone Jack", "HPOR",
+			"Int Spk", "SPOL",
+			"Int Spk", "SPOR",
+			"MIC1", "MIC Bias1",
+			"MIC Bias1", "Mic Jack",
+			"DMIC", "Int Mic";
+
+		nvidia,audio-codec = <&rt5631>;
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-asus-tf300tl.dts b/arch/arm/boot/dts/nvidia/tegra30-asus-tf300tl.dts
new file mode 100644
index 000000000000..2ef9d8737901
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-tf300tl.dts
@@ -0,0 +1,857 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-asus-transformer-common.dtsi"
+#include "tegra30-asus-lvds-display.dtsi"
+
+/ {
+	model = "Asus Transformer Pad LTE TF300TL";
+	compatible = "asus,tf300tl", "nvidia,tegra30";
+
+	gpio@6000d000 {
+		tf300tl-init-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
+	};
+
+	pinmux@70000868 {
+		state_default: pinmux {
+			lcd_pwr2_pc6 {
+				nvidia,pins = "lcd_pwr2_pc6",
+					      "lcd_dc1_pd2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pbb7 {
+				nvidia,pins = "pbb7";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_cs4_n_pk2 {
+				nvidia,pins = "gmi_cs4_n_pk2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ulpi_data5_po6 {
+				nvidia,pins = "ulpi_data5_po6";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap3_din_pp1 {
+				nvidia,pins = "dap3_din_pp1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			crt_hsync_pv6 {
+				nvidia,pins = "crt_hsync_pv6";
+				nvidia,function = "crt";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			crt_vsync_pv7 {
+				nvidia,pins = "crt_vsync_pv7";
+				nvidia,function = "crt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pu5 {
+				nvidia,pins = "pu5";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk3_out_pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk3_req_pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "dev3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			dap1_fs_pn0 {
+				nvidia,pins = "dap1_fs_pn0",
+						"dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			dap1_din_pn1 {
+				nvidia,pins = "dap1_din_pn1";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap1_dout_pn2 {
+				nvidia,pins = "dap1_dout_pn2";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk1_req_pee2 {
+				nvidia,pins = "clk1_req_pee2";
+				nvidia,function = "dap";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spi2_mosi_px0 {
+				nvidia,pins = "spi2_mosi_px0";
+				nvidia,function = "spi2";
+			};
+
+			spi1_sck_px5 {
+				nvidia,pins = "spi1_sck_px5";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			spi1_miso_px7 {
+				nvidia,pins = "spi1_miso_px7";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			spi2_cs2_n_pw3 {
+				nvidia,pins = "spi2_cs2_n_pw3";
+				nvidia,function = "spi2";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+
+	serial@70006200 {
+		/* Azurewave AW-NH615 BCM4329B1 */
+		bluetooth {
+			compatible = "brcm,bcm4329-bt";
+		};
+	};
+
+	i2c@7000c400 {
+		/* Elantech EKTH1036 touchscreen */
+		touchscreen@10 {
+			compatible = "elan,ektf3624";
+			reg = <0x10>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&gpio TEGRA_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+
+			vcc33-supply = <&vdd_3v3_sys>;
+			vccio-supply = <&vdd_3v3_sys>;
+
+			touchscreen-size-x = <2240>;
+			touchscreen-size-y = <1408>;
+			touchscreen-inverted-y;
+		};
+	};
+
+	i2c@7000c500 {
+		clock-frequency = <400000>;
+
+		magnetometer@e {
+			mount-matrix =  "-1",  "0",  "0",
+					 "0", "-1",  "0",
+					 "0",  "0",  "1";
+		};
+
+		gyroscope@68 {
+			mount-matrix =   "-1",  "0",  "0",
+					  "0",  "1",  "0",
+					  "0",  "0", "-1";
+
+			/* External I2C interface */
+			i2c-gate {
+				accelerometer@f {
+					mount-matrix =   "0", "-1",  "0",
+							"-1",  "0",  "0",
+							 "0",  "0",  "1";
+				};
+			};
+		};
+	};
+
+	i2c@7000d000 {
+		/* Realtek ALC5631 audio codec */
+		rt5631: audio-codec@1a {
+			compatible = "realtek,rt5631";
+			reg = <0x1a>;
+		};
+	};
+
+	memory-controller@7000f000 {
+		emc-timings-0 {
+			/* Elpida 1GB 667MHZ */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x74830303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x73430303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000030
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x72830504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000003 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0505 0x72440a06 0x001f0000 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emem-configuration = < 0x00000005 0xc000003d
+					0x00000001 0x00000002 0x00000008 0x00000004
+					0x00000004 0x00000001 0x00000002 0x00000007
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000b0608 0x70850f09 0x001f0000 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emem-configuration = < 0x0000000a 0xc0000079
+					0x00000003 0x00000004 0x00000010 0x0000000b
+					0x0000000a 0x00000001 0x00000003 0x0000000b
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00130b10 0x70ea1f11 0x001f0000 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* Hynix 1GB 667MHZ */
+			nvidia,ram-code = <1>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x74830303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x73430303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000030
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x72830504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000003 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0505 0x72440a06 0x001f0000 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emem-configuration = < 0x00000005 0xc000003d
+					0x00000001 0x00000002 0x00000008 0x00000004
+					0x00000004 0x00000001 0x00000002 0x00000007
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000b0608 0x70850f09 0x001f0000 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emem-configuration = < 0x0000000a 0xc0000079
+					0x00000003 0x00000004 0x00000010 0x0000000b
+					0x0000000a 0x00000001 0x00000003 0x0000000b
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00130b10 0x70ea1f11 0x001f0000 >;
+			};
+		};
+	};
+
+	memory-controller@7000f400 {
+		emc-timings-0 {
+			/* Elpida 1GB 667MHZ */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000004 0x00000000 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x000000c0 0x00000000 0x00000030
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000005 0x00000005
+					0x00000004 0x00000001 0x00000000 0x00000004
+					0x00000005 0x000000c7 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x00000008 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000009 0x00000009
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000005
+					0x00000010 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000012 0x00000012
+					0x00000004 0x00000004 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000a
+					0x00000020 0x00000007 0x00000002 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000006 0x00000004 0x0000000a
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000023 0x00000023
+					0x00000004 0x00000007 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000007 0x00000004
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200040>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x0000000f
+					0x00000034 0x0000000a 0x00000003 0x00000003
+					0x00000008 0x00000002 0x00000009 0x00000003
+					0x00000003 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x000009e9 0x00000000 0x0000027a
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000007 0x0000000e 0x00000039 0x00000200
+					0x00000004 0x0000000a 0x00000000 0x00000004
+					0x00000005 0x00000a2a 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007088 0x002600a4
+					0x00008000 0x0003c000 0x0003c000 0x0003c000
+					0x0003c000 0x00014000 0x00014000 0x00014000
+					0x00014000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00050000 0x00050000 0x00050000
+					0x00050000 0x000002a0 0x0800013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x018b000c 0xa0f10000 0x00000000
+					0x00000000 0x800014d4 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200058>;
+				nvidia,emc-mode-reset = <0x80000b71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000001f
+					0x00000069 0x00000017 0x00000007 0x00000005
+					0x0000000c 0x00000003 0x00000011 0x00000007
+					0x00000007 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000b 0x00000009 0x0000000b
+					0x00000011 0x00001412 0x00000000 0x00000504
+					0x00000002 0x0000000e 0x00000001 0x00000000
+					0x0000000c 0x00000016 0x00000072 0x00000200
+					0x00000005 0x00000015 0x00000000 0x00000006
+					0x00000007 0x00001453 0x0000000c 0x00000004
+					0x00000000 0x00000000 0x00005088 0xf00b0191
+					0x00008000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00018000 0x00018000 0x00018000
+					0x00018000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000c 0x0000000c 0x0000000c
+					0x0000000c 0x000002a0 0x0800013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x0a000021 0x00000802 0x00020000
+					0x00000100 0x0156000c 0xa0f10000 0x00000000
+					0x00000000 0x800028a5 0xe8000000 0xff00ff49 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* Hynix 1GB 667MHZ */
+			nvidia,ram-code = <1>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000004 0x00000000 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x000000c0 0x00000000 0x00000030
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000005 0x00000005
+					0x00000004 0x00000001 0x00000000 0x00000004
+					0x00000005 0x000000c7 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x00000008 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000009 0x00000009
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000005
+					0x00000010 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000012 0x00000012
+					0x00000004 0x00000004 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000a
+					0x00000020 0x00000007 0x00000002 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000006 0x00000004 0x0000000a
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000023 0x00000023
+					0x00000004 0x00000007 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000007 0x00000004
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200040>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x0000000f
+					0x00000034 0x0000000a 0x00000003 0x00000003
+					0x00000008 0x00000002 0x00000009 0x00000003
+					0x00000003 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x000009e9 0x00000000 0x0000027a
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000007 0x0000000e 0x00000039 0x00000200
+					0x00000004 0x0000000a 0x00000000 0x00000004
+					0x00000005 0x00000a2a 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007088 0x002600a4
+					0x00008000 0x0003c000 0x0003c000 0x0003c000
+					0x0003c000 0x00014000 0x00014000 0x00014000
+					0x00014000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00048000 0x00048000 0x00048000
+					0x00048000 0x000002a0 0x0800013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x018b000c 0xa0f10000 0x00000000
+					0x00000000 0x800014d4 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200058>;
+				nvidia,emc-mode-reset = <0x80000b71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000020
+					0x00000069 0x00000017 0x00000007 0x00000005
+					0x0000000c 0x00000003 0x00000011 0x00000007
+					0x00000007 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000b 0x00000009 0x0000000b
+					0x00000011 0x00001412 0x00000000 0x00000504
+					0x00000002 0x0000000e 0x00000001 0x00000000
+					0x0000000c 0x00000016 0x00000072 0x00000200
+					0x00000005 0x00000015 0x00000000 0x00000006
+					0x00000007 0x00001453 0x0000000c 0x00000004
+					0x00000000 0x00000000 0x00005088 0xf00b0191
+					0x00008000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000c 0x0000000c 0x0000000c
+					0x0000000c 0x000002a0 0x0600013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x0156000c 0xa0f10000 0x00000000
+					0x00000000 0x800028a5 0xf8000000 0xff00ff49 >;
+			};
+		};
+	};
+
+	pad_battery: battery-pad {
+		compatible = "simple-battery";
+		device-chemistry = "lithium-ion-polymer";
+		charge-full-design-microamp-hours = <2940000>;
+		energy-full-design-microwatt-hours = <22000000>;
+		operating-range-celsius = <0 45>;
+	};
+
+	dock_battery: battery-dock {
+		compatible = "simple-battery";
+		device-chemistry = "lithium-ion-polymer";
+		charge-full-design-microamp-hours = <2260000>;
+		energy-full-design-microwatt-hours = <16000000>;
+		operating-range-celsius = <0 45>;
+	};
+
+	display-panel {
+		compatible = "innolux,g101ice-l01";
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-750000000-1300;
+		/delete-node/ opp-800000000-1300;
+		/delete-node/ opp-900000000-1350;
+	};
+
+	opp-table-actmon {
+		/delete-node/ opp-750000000;
+		/delete-node/ opp-800000000;
+		/delete-node/ opp-900000000;
+	};
+
+	sound {
+		compatible = "asus,tegra-audio-rt5631-tf300tl",
+			     "nvidia,tegra-audio-rt5631";
+		nvidia,model = "Asus Transformer Pad TF300TL RT5631";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOL",
+			"Headphone Jack", "HPOR",
+			"Int Spk", "SPOL",
+			"Int Spk", "SPOR",
+			"MIC1", "MIC Bias1",
+			"MIC Bias1", "Mic Jack",
+			"DMIC", "Int Mic";
+
+		nvidia,audio-codec = <&rt5631>;
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-asus-tf600t.dts b/arch/arm/boot/dts/nvidia/tegra30-asus-tf600t.dts
new file mode 100644
index 000000000000..5d9e23a43820
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-tf600t.dts
@@ -0,0 +1,2500 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "tegra30.dtsi"
+#include "tegra30-cpu-opp.dtsi"
+#include "tegra30-cpu-opp-microvolt.dtsi"
+
+/ {
+	model = "Asus VivoTab RT TF600T";
+	compatible = "asus,tf600t", "nvidia,tegra30";
+	chassis-type = "convertible";
+
+	aliases {
+		mmc0 = &sdmmc4; /* eMMC */
+		mmc1 = &sdmmc1; /* uSD slot */
+		mmc2 = &sdmmc3; /* WiFi */
+
+		rtc0 = &pmic;
+		rtc1 = "/rtc@7000e000";
+
+		display1 = &hdmi;
+
+		serial1 = &uartc; /* Bluetooth */
+		serial2 = &uartb; /* GPS */
+	};
+
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	memory@80000000 {
+		reg = <0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		linux,cma@80000000 {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0x80000000 0x30000000>;
+			size = <0x10000000>;		/* 256MiB */
+			linux,cma-default;
+			reusable;
+		};
+	};
+
+	host1x@50000000 {
+		hdmi: hdmi@54280000 {
+			status = "okay";
+
+			hdmi-supply = <&hdmi_5v0_sys>;
+			pll-supply = <&vdd_1v8_vio>;
+			vdd-supply = <&vdd_3v3_sys>;
+
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+		};
+	};
+
+	vde@6001a000 {
+		assigned-clocks = <&tegra_car TEGRA30_CLK_VDE>;
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_P>;
+		assigned-clock-rates = <408000000>;
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* SDMMC1 pinmux */
+			sdmmc1-clk {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1-cmd {
+				nvidia,pins = "sdmmc1_dat3_py4",
+					      "sdmmc1_dat2_py5",
+					      "sdmmc1_dat1_py6",
+					      "sdmmc1_dat0_py7",
+					      "sdmmc1_cmd_pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1-cd {
+				nvidia,pins = "gmi_iordy_pi5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1-wp {
+				nvidia,pins = "vi_d11_pt3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* SDMMC2 pinmux */
+			vi-d1-pd5 {
+				nvidia,pins = "vi_d1_pd5",
+					      "vi_d2_pl0",
+					      "vi_d3_pl1",
+					      "vi_d5_pl3",
+					      "vi_d7_pl5";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			vi-d8-pl6 {
+				nvidia,pins = "vi_d8_pl6",
+					      "vi_d9_pl7";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+				nvidia,io-reset = <0>;
+			};
+
+			/* SDMMC3 pinmux */
+			sdmmc3-clk {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3-cmd {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+					      "sdmmc3_dat0_pb7",
+					      "sdmmc3_dat1_pb6",
+					      "sdmmc3_dat2_pb5",
+					      "sdmmc3_dat3_pb4",
+					      "sdmmc3_dat4_pd1",
+					      "sdmmc3_dat5_pd0",
+					      "sdmmc3_dat6_pd3",
+					      "sdmmc3_dat7_pd4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* SDMMC4 pinmux */
+			sdmmc4-clk {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-cmd {
+				nvidia,pins = "sdmmc4_cmd_pt7",
+					      "sdmmc4_dat0_paa0",
+					      "sdmmc4_dat1_paa1",
+					      "sdmmc4_dat2_paa2",
+					      "sdmmc4_dat3_paa3",
+					      "sdmmc4_dat4_paa4",
+					      "sdmmc4_dat5_paa5",
+					      "sdmmc4_dat6_paa6",
+					      "sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-rst-n {
+				nvidia,pins = "sdmmc4_rst_n_pcc3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			cam-mclk {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* I2C pinmux */
+			gen1-i2c {
+				nvidia,pins = "gen1_i2c_scl_pc4",
+					      "gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			gen2-i2c {
+				nvidia,pins = "gen2_i2c_scl_pt5",
+					      "gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			cam-i2c {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+					      "cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			ddc-i2c {
+				nvidia,pins = "ddc_scl_pv4",
+					      "ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			pwr-i2c {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+					      "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			hotplug-i2c {
+				nvidia,pins = "pu4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* HDMI pinmux */
+			hdmi-cec {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi-hpd {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "hdmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* UART-A */
+			ulpi-data0-po1 {
+				nvidia,pins = "ulpi_data0_po1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi-data1-po2 {
+				nvidia,pins = "ulpi_data1_po2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi-data5-po6 {
+				nvidia,pins = "ulpi_data5_po6";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi-data7-po0 {
+				nvidia,pins = "ulpi_data7_po0",
+					      "ulpi_data2_po3",
+					      "ulpi_data3_po4",
+					      "ulpi_data4_po5",
+					      "ulpi_data6_po7";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* UART-B */
+			uartb-txd-rts {
+				nvidia,pins = "uart2_txd_pc2",
+					      "uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uartb-rxd-cts {
+				nvidia,pins = "uart2_rxd_pc3",
+					      "uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* UART-C */
+			uartc-rxd-cts {
+				nvidia,pins = "uart3_cts_n_pa1",
+					      "uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uartc-txd-rts {
+				nvidia,pins = "uart3_rts_n_pc0",
+					      "uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* UART-D */
+			ulpi-nxt-py2 {
+				nvidia,pins = "ulpi_nxt_py2";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi-clk-py0 {
+				nvidia,pins = "ulpi_clk_py0",
+					      "ulpi_dir_py1",
+					      "ulpi_stp_py3";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* I2S pinmux */
+			dap-i2s0 {
+				nvidia,pins = "dap1_fs_pn0",
+					      "dap1_din_pn1",
+					      "dap1_dout_pn2",
+					      "dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap-i2s1 {
+				nvidia,pins = "dap2_fs_pa2",
+					      "dap2_sclk_pa3",
+					      "dap2_din_pa4",
+					      "dap2_dout_pa5";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3-fs {
+				nvidia,pins = "dap3_fs_pp0";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3-din {
+				nvidia,pins = "dap3_din_pp1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3-dout {
+				nvidia,pins = "dap3_dout_pp2",
+					      "dap3_sclk_pp3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap-i2s3 {
+				nvidia,pins = "dap4_fs_pp4",
+					      "dap4_din_pp5",
+					      "dap4_dout_pp6",
+					      "dap4_sclk_pp7";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			i2s4 {
+				nvidia,pins = "pbb7";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Sensors pinmux */
+			nct-irq {
+				nvidia,pins = "pcc2";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			hall {
+				nvidia,pins = "pbb6";
+				nvidia,function = "vgp6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Asus EC pinmux */
+			ec-irqs {
+				nvidia,pins = "kb_row10_ps2",
+					      "kb_row15_ps7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ec-reqs {
+				nvidia,pins = "kb_col1_pq1";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Memory type bootstrap */
+			mem-boostraps {
+				nvidia,pins = "gmi_ad4_pg4",
+					      "gmi_ad5_pg5";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* PCI-e pinmux */
+			pex-l2-rst-n {
+				nvidia,pins = "pex_l2_rst_n_pcc6",
+					      "pex_l0_rst_n_pdd1",
+					      "pex_l1_rst_n_pdd5";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex-l2-clkreq-n {
+				nvidia,pins = "pex_l2_clkreq_n_pcc7",
+					      "pex_l0_prsnt_n_pdd0",
+					      "pex_l0_clkreq_n_pdd2",
+					      "pex_wake_n_pdd3",
+					      "pex_l1_prsnt_n_pdd4",
+					      "pex_l1_clkreq_n_pdd6",
+					      "pex_l2_prsnt_n_pdd7";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Display A pinmux */
+			lcd-pwr0-pb2 {
+				nvidia,pins = "lcd_pwr0_pb2",
+					      "lcd_pclk_pb3",
+					      "lcd_pwr1_pc1",
+					      "lcd_d0_pe0",
+					      "lcd_d1_pe1",
+					      "lcd_d2_pe2",
+					      "lcd_d3_pe3",
+					      "lcd_d4_pe4",
+					      "lcd_d5_pe5",
+					      "lcd_d6_pe6",
+					      "lcd_d7_pe7",
+					      "lcd_d8_pf0",
+					      "lcd_d9_pf1",
+					      "lcd_d10_pf2",
+					      "lcd_d11_pf3",
+					      "lcd_d12_pf4",
+					      "lcd_d13_pf5",
+					      "lcd_d14_pf6",
+					      "lcd_d15_pf7",
+					      "lcd_de_pj1",
+					      "lcd_hsync_pj3",
+					      "lcd_vsync_pj4",
+					      "lcd_d16_pm0",
+					      "lcd_d17_pm1",
+					      "lcd_d18_pm2",
+					      "lcd_d19_pm3",
+					      "lcd_d20_pm4",
+					      "lcd_d21_pm5",
+					      "lcd_d22_pm6",
+					      "lcd_d23_pm7",
+					      "lcd_dc0_pn6",
+					      "lcd_sdin_pz2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd-cs0-n-pn4 {
+				nvidia,pins = "lcd_sdout_pn5",
+					      "lcd_wr_n_pz3",
+					      "lcd_pwr2_pc6",
+					      "lcd_dc1_pd2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			blink {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,function = "blink";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* KBC keys */
+			kb-col0 {
+				nvidia,pins = "kb_col0_pq0",
+					      "kb_row1_pr1",
+					      "kb_row3_pr3",
+					      "kb_row7_pr7",
+					      "kb_row8_ps0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb-col5 {
+				nvidia,pins = "kb_col5_pq5",
+					      "kb_col7_pq7",
+					      "kb_row2_pr2",
+					      "kb_row4_pr4",
+					      "kb_row5_pr5",
+					      "kb_row13_ps5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi-cs0-n-pj0 {
+				nvidia,pins = "gmi_wp_n_pc7",
+					      "gmi_wait_pi7",
+					      "gmi_cs0_n_pj0",
+					      "gmi_cs1_n_pj2",
+					      "gmi_cs2_n_pk3",
+					      "gmi_cs3_n_pk4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vi-pclk-pt0 {
+				nvidia,pins = "vi_pclk_pt0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+				nvidia,io-reset = <0>;
+			};
+
+			/* GPIO keys pinmux */
+			power-key {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			vol-keys {
+				nvidia,pins = "kb_col3_pq3",
+					      "kb_col4_pq4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Bluetooth */
+			bt-shutdown {
+				nvidia,pins = "pu0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			bt-dev-wake {
+				nvidia,pins = "pu1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			bt-host-wake {
+				nvidia,pins = "pu6";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pu2 {
+				nvidia,pins = "pu2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcc1 {
+				nvidia,pins = "pcc1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pv2 {
+				nvidia,pins = "pv2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pv3 {
+				nvidia,pins = "pv3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi-vsync-pd6 {
+				nvidia,pins = "vi_vsync_pd6",
+					      "vi_hsync_pd7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+				nvidia,io-reset = <0>;
+			};
+			vi-d10-pt2 {
+				nvidia,pins = "vi_d10_pt2",
+					      "vi_d0_pt4",
+					      "pbb0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb-row0-pr0 {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-ad0-pg0 {
+				nvidia,pins = "gmi_ad0_pg0",
+					      "gmi_ad1_pg1",
+					      "gmi_ad2_pg2",
+					      "gmi_ad3_pg3",
+					      "gmi_ad6_pg6",
+					      "gmi_ad7_pg7",
+					      "gmi_wr_n_pi0",
+					      "gmi_oe_n_pi1",
+					      "gmi_dqs_pi2",
+					      "gmi_adv_n_pk0",
+					      "gmi_clk_pk1";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-ad13-ph5 {
+				nvidia,pins = "gmi_ad13_ph5";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi-ad10-ph2 {
+				nvidia,pins = "gmi_ad10_ph2",
+					      "gmi_ad11_ph3",
+					      "gmi_ad14_ph6";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi-ad12-ph4 {
+				nvidia,pins = "gmi_ad12_ph4",
+					      "gmi_rst_n_pi4",
+					      "gmi_cs7_n_pi6";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Vibrator control */
+			vibrator {
+				nvidia,pins = "gmi_ad11_ph3";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* PWM pinmux */
+			pwm-0 {
+				nvidia,pins = "gmi_ad8_ph0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pwm-2 {
+				nvidia,pins = "pu5";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi-cs-n {
+				nvidia,pins = "gmi_cs4_n_pk2",
+					      "gmi_cs6_n_pi3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Spdif pinmux */
+			spdif-out {
+				nvidia,pins = "spdif_out_pk5";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spdif-in {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vi-d4-pl2 {
+				nvidia,pins = "vi_d4_pl2";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			vi-d6-pl4 {
+				nvidia,pins = "vi_d6_pl4";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <0>;
+				nvidia,io-reset = <0>;
+			};
+			vi-mclk-pt1 {
+				nvidia,pins = "vi_mclk_pt1";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			jtag {
+				nvidia,pins = "jtag_rtck_pu7";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			crt-sync {
+				nvidia,pins = "crt_hsync_pv6",
+					      "crt_vsync_pv7";
+				nvidia,function = "crt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk1-out {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2-out {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "extperiph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk3-out {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sys-clk-req {
+				nvidia,pins = "sys_clk_req_pz5";
+				nvidia,function = "sysclk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb4 {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb5 {
+				nvidia,pins = "pbb5";
+				nvidia,function = "vgp5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk2-req-pcc5 {
+				nvidia,pins = "clk2_req_pcc5",
+					      "clk1_req_pee2";
+				nvidia,function = "dap";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk3-req-pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "dev3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* GPIO power/drive control */
+			drive-dap1 {
+				nvidia,pins = "drive_dap1",
+					      "drive_dap2",
+					      "drive_dbg",
+					      "drive_at5",
+					      "drive_gme",
+					      "drive_ddc",
+					      "drive_ao1",
+					      "drive_uart3";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+			drive-sdio1 {
+				nvidia,pins = "drive_sdio1",
+					      "drive_sdio3";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <46>;
+				nvidia,pull-up-strength = <42>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FAST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FAST>;
+			};
+			drive-sdmmc4 {
+				nvidia,pins = "drive_gma",
+					      "drive_gmb",
+					      "drive_gmc",
+					      "drive_gmd";
+				nvidia,pull-down-strength = <9>;
+				nvidia,pull-up-strength = <9>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+		};
+	};
+
+	uartb: serial@70006040 {
+		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
+		status = "okay";
+
+		/* Broadcom GPS BCM47511 */
+	};
+
+	uartc: serial@70006200 {
+		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
+		status = "okay";
+
+		nvidia,adjust-baud-rates = <0 9600 100>,
+					   <9600 115200 200>,
+					   <1000000 4000000 136>;
+
+		/* Azurewave AW-NH665 BCM4330B1 */
+		bluetooth {
+			compatible = "brcm,bcm4330-bt";
+			max-speed = <4000000>;
+
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+			clock-names = "txco";
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "host-wakeup";
+
+			device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
+			shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
+
+			vbat-supply = <&vdd_3v3_com>;
+			vddio-supply = <&vdd_1v8_vio>;
+		};
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	gen1_i2c: i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		/* Nuvoton NPCE698LA0BX embedded controller */
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* Atmel Maxtouch MXT1664 HID over I2C */
+		touchscreen@4b {
+			compatible = "hid-over-i2c";
+			reg = <0x4b>;
+
+			hid-descr-addr = <0x0000>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_LEVEL_LOW>;
+
+			vdd-supply = <&vdd_3v3_sys>;
+			vddl-supply = <&vdd_1v8_vio>;
+		};
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		/* TI TPS61050/61052 Boost Converter */
+		flash-led@33 {
+			compatible = "ti,tps61052";
+			reg = <0x33>;
+
+			led {
+				color = <LED_COLOR_ID_WHITE>;
+			};
+		};
+
+		imu@69 {
+			compatible = "invensense,mpu6050";
+			reg = <0x69>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 1) IRQ_TYPE_EDGE_RISING>;
+
+			vdd-supply   = <&vdd_3v3_sys>;
+			vddio-supply = <&vdd_1v8_vio>;
+
+			mount-matrix =	 "0", "-1",  "0",
+					"-1",  "0",  "0",
+					 "0",  "0", "-1";
+
+			/* External I2C interface */
+			i2c-gate {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				magnetometer@d {
+					compatible = "asahi-kasei,ak8975";
+					reg = <0x0d>;
+
+					interrupt-parent = <&gpio>;
+					interrupts = <TEGRA_GPIO(D, 5) IRQ_TYPE_EDGE_RISING>;
+
+					vdd-supply = <&vdd_3v3_sys>;
+					vid-supply = <&vdd_1v8_vio>;
+
+					mount-matrix =	 "0", "-1",  "0",
+							"-1",  "0",  "0",
+							 "0",  "0", "-1";
+				};
+			};
+		};
+	};
+
+	hdmi_ddc: i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <93750>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		rt5640: audio-codec@1c {
+			compatible = "realtek,rt5640";
+			reg = <0x1c>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+			clock-names = "mclk";
+		};
+
+		/* Texas Instruments TPS659110 PMIC */
+		pmic: pmic@2d {
+			compatible = "ti,tps65911";
+			reg = <0x2d>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>;
+			ti,system-power-controller;
+			ti,sleep-keep-ck32k;
+			ti,sleep-enable;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			vcc1-supply = <&vdd_5v0_bat>;
+			vcc2-supply = <&vdd_5v0_bat>;
+			vcc3-supply = <&vdd_1v8_vio>;
+			vcc4-supply = <&vdd_5v0_sys>;
+			vcc5-supply = <&vdd_5v0_bat>;
+			vcc6-supply = <&vdd_3v3_sys>;
+			vcc7-supply = <&vdd_5v0_bat>;
+			vccio-supply = <&vdd_5v0_bat>;
+
+			pmic-sleep-hog {
+				gpio-hog;
+				gpios = <2 GPIO_ACTIVE_HIGH>;
+				output-high;
+			};
+
+			regulators {
+				vdd_lcd: vdd1 {
+					regulator-name = "vddio_ddr_1v2";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ti,regulator-ext-sleep-control = <8>;
+				};
+
+				vddio_ddr: vdd2 {
+					regulator-name = "vddio_ddr";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_cpu: vddctrl {
+					regulator-name = "vdd_cpu,vdd_sys";
+					regulator-min-microvolt = <600000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-coupled-with = <&vdd_core>;
+					regulator-coupled-max-spread = <300000>;
+					regulator-max-step-microvolt = <100000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ti,regulator-ext-sleep-control = <1>;
+
+					nvidia,tegra-cpu-regulator;
+				};
+
+				vdd_1v8_vio: vio {
+					regulator-name = "vdd_1v8_gen";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				/* eMMC VDD */
+				vcore_emmc: ldo1 {
+					regulator-name = "vdd_emmc_core";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				/* ldo2 and ldo3 are not used by TF600T */
+
+				ldo4 {
+					regulator-name = "vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				/* uSD slot VDDIO */
+				vddio_usd: ldo5 {
+					regulator-name = "vddio_sdmmc";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				avdd_dsi_csi: ldo6 {
+					regulator-name = "avdd_dsi_csi";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo7 {
+					regulator-name = "vdd_pllm,x,u,a_p_c_s";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ti,regulator-ext-sleep-control = <8>;
+				};
+
+				ldo8 {
+					regulator-name = "vdd_ddr_hs";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					ti,regulator-ext-sleep-control = <8>;
+				};
+			};
+		};
+
+		/* Capella CM3218 ambient light sensor */
+		light-sensor@48 {
+			compatible = "capella,cm32181";
+			reg = <0x48>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(L, 0) IRQ_TYPE_EDGE_RISING>;
+
+			vdd-supply = <&vdd_3v3_als>;
+		};
+
+		nct72: temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_EDGE_FALLING>;
+
+			vcc-supply = <&vdd_3v3_sys>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		vdd_core: core-regulator@60 {
+			compatible = "ti,tps62361";
+			reg = <0x60>;
+
+			regulator-name = "tps62361-vout";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1770000>;
+			regulator-coupled-with = <&vdd_cpu>;
+			regulator-coupled-max-spread = <300000>;
+			regulator-max-step-microvolt = <100000>;
+			regulator-boot-on;
+			regulator-always-on;
+			ti,enable-vout-discharge;
+			ti,vsel0-state-high;
+			ti,vsel1-state-high;
+
+			nvidia,tegra-core-regulator;
+		};
+	};
+
+	pmc@7000e400 {
+		status = "okay";
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <2>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <200>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <0>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
+
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <4>;
+			nvidia,bus-addr = <0x2d>;
+			nvidia,reg-addr = <0x3f>;
+			nvidia,reg-data = <0x81>;
+		};
+	};
+
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+
+		flash@1 {
+			compatible = "winbond,w25q32", "jedec,spi-nor";
+			reg = <1>;
+
+			spi-max-frequency = <20000000>;
+			vcc-supply = <&vdd_3v3_sys>;
+		};
+	};
+
+	memory-controller@7000f000 {
+		emc-timings-0 {
+			/* Elpida 2GB 750 MHZ */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x75e30303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x74e30303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000018
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x74430504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000003 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0505 0x74040a06 0x001f0000 >;
+			};
+
+			timing-375000000 {
+				clock-frequency = <375000000>;
+
+				nvidia,emem-configuration = < 0x00000005 0xc0000044
+					0x00000001 0x00000002 0x00000009 0x00000005
+					0x00000005 0x00000001 0x00000002 0x00000008
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000d0709 0x7086110a 0x001f0000 >;
+			};
+
+			timing-750000000 {
+				clock-frequency = <750000000>;
+
+				nvidia,emem-configuration = < 0x0000000b 0xc0000087
+					0x00000004 0x00000005 0x00000012 0x0000000c
+					0x0000000b 0x00000002 0x00000003 0x0000000c
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00160d12 0x710c2213 0x001f0000 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* Hynix 2GB 750 MHZ */
+			nvidia,ram-code = <1>;
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010003 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x74630303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000018
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x73c30504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000006 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000003 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0505 0x73840a06 0x001f0000 >;
+			};
+
+			timing-375000000 {
+				clock-frequency = <375000000>;
+
+				nvidia,emem-configuration = < 0x0000000b 0xc0000044
+					0x00000001 0x00000002 0x00000009 0x00000005
+					0x00000005 0x00000001 0x00000002 0x00000008
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000c0609 0x7086110a 0x001f0000 >;
+			};
+
+			timing-750000000 {
+				clock-frequency = <750000000>;
+
+				nvidia,emem-configuration = < 0x00000016 0xc0000087
+					0x00000003 0x00000004 0x00000012 0x0000000c
+					0x0000000b 0x00000002 0x00000003 0x0000000c
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00150c12 0x710c2213 0x001f0000 >;
+			};
+		};
+
+		emc-timings-2 {
+			/* Micron 2GB 750 MHZ */
+			nvidia,ram-code = <2>;
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010003 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x73430303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000018
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x74430504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000006 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000003 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0505 0x74040a06 0x001f0000 >;
+			};
+
+			timing-375000000 {
+				clock-frequency = <375000000>;
+
+				nvidia,emem-configuration = < 0x0000000b 0xc0000044
+					0x00000001 0x00000002 0x00000009 0x00000005
+					0x00000005 0x00000001 0x00000002 0x00000008
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000d0709 0x7086110a 0x001f0000 >;
+			};
+
+			timing-750000000 {
+				clock-frequency = <750000000>;
+
+				nvidia,emem-configuration = < 0x00000016 0xc0000087
+					0x00000004 0x00000005 0x00000012 0x0000000c
+					0x0000000b 0x00000003 0x00000003 0x0000000c
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00160d12 0x710c2213 0x001f0000 >;
+			};
+		};
+	};
+
+	memory-controller@7000f400 {
+		emc-timings-0 {
+			/* Elpida 2GB 750 MHZ */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000007 0x00000000 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x000000c0 0x00000000 0x00000030
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000008 0x00000008
+					0x00000004 0x00000001 0x00000000 0x00000004
+					0x00000005 0x000000c7 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x0000000f 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000010 0x00000010
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+
+				nvidia,emc-configuration =  < 0x00000004
+					0x0000001e 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000020 0x00000020
+					0x00000004 0x00000004 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+
+				nvidia,emc-configuration =  < 0x00000009
+					0x0000003d 0x00000007 0x00000002 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000006 0x00000004 0x0000000a
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000040 0x00000040
+					0x00000004 0x00000007 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000007 0x00000004
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-375000000 {
+				clock-frequency = <375000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200040>;
+				nvidia,emc-mode-reset = <0x80000521>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x00000011
+					0x0000006f 0x0000000c 0x00000004 0x00000003
+					0x00000008 0x00000002 0x0000000a 0x00000004
+					0x00000004 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x00000b2d 0x00000000 0x000002cb
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000075 0x00000200
+					0x00000004 0x0000000c 0x00000000 0x00000004
+					0x00000005 0x00000b6d 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007088 0x00200084
+					0x00008000 0x00034000 0x00034000 0x00034000
+					0x00034000 0x00014000 0x00014000 0x00014000
+					0x00014000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00048000 0x00048000 0x00048000
+					0x00048000 0x000002a0 0x0600013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x080001e8 0x06000021 0x00000802 0x00020000
+					0x00000100 0x0150000c 0xa0f10000 0x00000000
+					0x00000000 0x8000174b 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-750000000 {
+				clock-frequency = <750000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200058>;
+				nvidia,emc-mode-reset = <0x80000d71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000023
+					0x000000df 0x00000019 0x00000009 0x00000005
+					0x0000000d 0x00000004 0x00000013 0x00000009
+					0x00000009 0x00000003 0x00000001 0x00000000
+					0x00000007 0x0000000b 0x00000009 0x0000000b
+					0x00000011 0x0000169a 0x00000000 0x000005a6
+					0x00000003 0x00000010 0x00000001 0x00000000
+					0x0000000e 0x00000018 0x000000e9 0x00000200
+					0x00000005 0x00000017 0x00000000 0x00000007
+					0x00000008 0x000016da 0x0000000c 0x00000004
+					0x00000000 0x00000000 0x00005088 0xf0080191
+					0x00008000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00000008 0x00000008 0x00000008
+					0x00000008 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x000002a0 0x0600013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x06000021 0x00000802 0x00020000
+					0x00000100 0x00df000c 0xa0f10000 0x00000000
+					0x00000000 0x80002d93 0xf8000000 0xff00ff49 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* Hynix 2GB 750 MHZ */
+			nvidia,ram-code = <1>;
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x0000000d 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x0000000e 0x0000000e
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+
+				nvidia,emc-configuration =  < 0x00000004
+					0x0000001a 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x0000001c 0x0000001c
+					0x00000004 0x00000004 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+
+				nvidia,emc-configuration =  < 0x00000009
+					0x00000035 0x00000007 0x00000002 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000006 0x00000004 0x0000000a
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000038 0x00000038
+					0x00000004 0x00000007 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000007 0x00000004
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-375000000 {
+				clock-frequency = <375000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200040>;
+				nvidia,emc-mode-reset = <0x80000521>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x00000011
+					0x00000060 0x0000000c 0x00000003 0x00000004
+					0x00000008 0x00000002 0x0000000a 0x00000003
+					0x00000003 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x00000b2d 0x00000000 0x000002cb
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000007 0x00000010 0x00000066 0x00000200
+					0x00000004 0x0000000c 0x00000000 0x00000004
+					0x00000005 0x00000b6d 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007288 0x00200084
+					0x00008000 0x00044000 0x00044000 0x00044000
+					0x00044000 0x00014000 0x00014000 0x00014000
+					0x00014000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00048000 0x00048000 0x00048000
+					0x00048000 0x000002a0 0x0600013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x08000168 0x06000021 0x00000802 0x00020000
+					0x00000100 0x015f000c 0xa0f10000 0x00000000
+					0x00000000 0x8000174b 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-750000000 {
+				clock-frequency = <750000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200058>;
+				nvidia,emc-mode-reset = <0x80000d71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000023
+					0x000000c1 0x00000019 0x00000008 0x00000005
+					0x0000000d 0x00000004 0x00000013 0x00000008
+					0x00000008 0x00000003 0x00000001 0x00000000
+					0x00000007 0x0000000b 0x00000009 0x0000000b
+					0x00000011 0x0000169a 0x00000000 0x000005a6
+					0x00000003 0x00000010 0x00000001 0x00000000
+					0x0000000e 0x00000018 0x000000cb 0x00000200
+					0x00000005 0x00000017 0x00000000 0x00000007
+					0x00000008 0x000016da 0x0000000c 0x00000004
+					0x00000000 0x00000000 0x00005088 0xf0080191
+					0x00008000 0x00008008 0x00000008 0x00000008
+					0x00000008 0x00000008 0x00000008 0x00000008
+					0x00000008 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x000002a0 0x0800013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x00fd000c 0xa0f10000 0x00000000
+					0x00000000 0x80002d93 0xe8000000 0xff00ff49 >;
+			};
+		};
+
+		emc-timings-2 {
+			/* Micron 2GB 750 MHZ */
+			nvidia,ram-code = <2>;
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x00000008 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000009 0x00000009
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+
+				nvidia,emc-configuration =  < 0x00000004
+					0x0000001e 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000020 0x00000020
+					0x00000004 0x00000004 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+
+				nvidia,emc-configuration =  < 0x00000009
+					0x0000003d 0x00000007 0x00000002 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000006 0x00000004 0x0000000a
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000040 0x00000040
+					0x00000004 0x00000007 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000007 0x00000004
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-375000000 {
+				clock-frequency = <375000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200040>;
+				nvidia,emc-mode-reset = <0x80000521>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x00000011
+					0x0000006f 0x0000000c 0x00000004 0x00000003
+					0x00000008 0x00000002 0x0000000a 0x00000004
+					0x00000004 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x00000b2d 0x00000000 0x000002cb
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000075 0x00000200
+					0x00000004 0x0000000c 0x00000000 0x00000004
+					0x00000005 0x00000b6d 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007088 0x00200084
+					0x00008000 0x00044000 0x00044000 0x00044000
+					0x00044000 0x00014000 0x00014000 0x00014000
+					0x00014000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00048000 0x00048000 0x00048000
+					0x00048000 0x000002a0 0x0800013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x0150000c 0xa0f10000 0x00000000
+					0x00000000 0x8000174b 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-750000000 {
+				clock-frequency = <750000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200058>;
+				nvidia,emc-mode-reset = <0x80000d71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000023
+					0x000000df 0x00000019 0x00000009 0x00000005
+					0x0000000d 0x00000004 0x00000013 0x00000009
+					0x00000009 0x00000006 0x00000001 0x00000000
+					0x00000007 0x0000000b 0x00000009 0x0000000b
+					0x00000011 0x0000169a 0x00000000 0x000005a6
+					0x00000003 0x00000010 0x00000001 0x00000000
+					0x0000000e 0x00000018 0x000000e9 0x00000200
+					0x00000005 0x00000017 0x00000000 0x00000007
+					0x00000008 0x000016da 0x0000000c 0x00000004
+					0x00000000 0x00000000 0x00005088 0xf0080191
+					0x00008000 0x0000800a 0x0000000a 0x0000000a
+					0x0000000a 0x00000008 0x00000008 0x00000008
+					0x00000008 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x007fc00a 0x0000000a 0x0000000a
+					0x0000000a 0x000002a0 0x0800013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x00df000c 0xa0f10000 0x00000000
+					0x00000000 0x80002d93 0xf8000000 0xff00ff49 >;
+			};
+		};
+	};
+
+	hda@70030000 {
+		status = "okay";
+	};
+
+	ahub@70080000 {
+		i2s@70080400 {		/* i2s1 */
+			status = "okay";
+		};
+
+		/* BT SCO */
+		i2s@70080600 {		/* i2s3 */
+			status = "okay";
+		};
+	};
+
+	sdmmc1: mmc@78000000 {
+		status = "okay";
+		bus-width = <4>;
+
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		power-gpios =  <&gpio TEGRA_GPIO(D, 7) GPIO_ACTIVE_HIGH>;
+
+		vmmc-supply = <&vdd_3v3_sys>;
+		vqmmc-supply = <&vddio_usd>;
+	};
+
+	sdmmc3: mmc@78000400 {
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_SDMMC3>;
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_C>;
+		assigned-clock-rates = <50000000>;
+
+		max-frequency = <50000000>;
+		keep-power-in-suspend;
+		bus-width = <4>;
+		non-removable;
+
+		mmc-pwrseq = <&brcm_wifi_pwrseq>;
+		vmmc-supply = <&vdd_3v3_com>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+
+		/* Azurewave AW-NH665 BCM4330B1 */
+		wifi@1 {
+			compatible = "brcm,bcm4329-fmac";
+			reg = <1>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host-wake";
+		};
+	};
+
+	sdmmc4: mmc@78000600 {
+		status = "okay";
+		bus-width = <8>;
+
+		non-removable;
+		mmc-ddr-1_8v;
+
+		vmmc-supply = <&vcore_emmc>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+	};
+
+	/* USB via ASUS connector */
+	usb@7d000000 {
+		compatible = "nvidia,tegra30-udc";
+		status = "okay";
+		dr_mode = "peripheral";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		dr_mode = "peripheral";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		vbus-supply = <&vdd_5v0_sys>;
+	};
+
+	/* Dock's USB port */
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&vdd_5v0_bat>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_5v0_bl>;
+		pwms = <&pwm 0 71428>;
+
+		brightness-levels = <1 255>;
+		num-interpolated-steps = <254>;
+		default-brightness-level = <15>;
+	};
+
+	pad_battery: battery-pad {
+		compatible = "simple-battery";
+		device-chemistry = "lithium-ion-polymer";
+		charge-full-design-microamp-hours = <6760000>;
+		energy-full-design-microwatt-hours = <25000000>;
+		operating-range-celsius = <0 45>;
+	};
+
+	dock_battery: battery-dock {
+		compatible = "simple-battery";
+		device-chemistry = "lithium-ion-polymer";
+		charge-full-design-microamp-hours = <2980000>;
+		energy-full-design-microwatt-hours = <22000000>;
+		operating-range-celsius = <0 45>;
+	};
+
+	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "pmic-oscillator";
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu1: cpu@1 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu2: cpu@2 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu3: cpu@3 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	extcon-keys {
+		compatible = "gpio-keys";
+
+		switch-dock-hall-sensor {
+			label = "Lid sensor";
+			gpios = <&gpio TEGRA_GPIO(BB, 6) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			debounce-interval = <500>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		switch-lineout-detect {
+			label = "Audio dock line-out detect";
+			gpios = <&gpio TEGRA_GPIO(X, 3) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LINEOUT_INSERT>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(Q, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	haptic-feedback {
+		compatible = "gpio-vibrator";
+		enable-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+		vcc-supply = <&vdd_3v3_sys>;
+	};
+
+	opp-table-actmon {
+		/delete-node/ opp-800000000;
+		/delete-node/ opp-900000000;
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-800000000-1300;
+		/delete-node/ opp-900000000-1350;
+	};
+
+	brcm_wifi_pwrseq: pwrseq-wifi {
+		compatible = "mmc-pwrseq-simple";
+
+		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+		clock-names = "ext_clock";
+
+		reset-gpios = <&gpio TEGRA_GPIO(P, 1) GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <300>;
+		power-off-delay-us = <300>;
+	};
+
+	vdd_5v0_bat: regulator-bat {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_ac_bat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_5v0_cp: regulator-sby {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_sby";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	vdd_5v0_sys: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	vdd_1v5_ddr: regulator-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_ddr";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	vdd_3v3_sys: regulator-3v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	vdd_3v3_com: regulator-com {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_com";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_3v3_als: regulator-als {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_als";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		gpio = <&gpio TEGRA_GPIO(L, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_5v0_bl: regulator-bl {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_bl";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	hdmi_5v0_sys: regulator-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "hdmi_5v0_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	sound {
+		compatible = "asus,tegra-audio-rt5640-tf600t",
+			     "nvidia,tegra-audio-rt5640";
+		nvidia,model = "Asus VivoTab RT TF600T RT5640";
+
+		nvidia,audio-routing =
+			"Headphones", "HPOR",
+			"Headphones", "HPOL",
+			"Speakers", "SPORP",
+			"Speakers", "SPORN",
+			"Speakers", "SPOLP",
+			"Speakers", "SPOLN",
+			"DMIC1", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&rt5640>;
+
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+		nvidia,mic-det-gpios = <&gpio TEGRA_GPIO(X, 2) GPIO_ACTIVE_LOW>;
+		nvidia,coupled-mic-hp-det;
+
+		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA30_CLK_EXTERN1>;
+	};
+
+	thermal-zones {
+		/*
+		 * NCT72 has two sensors:
+		 *
+		 *	0: internal that monitors ambient/skin temperature
+		 *	1: external that is connected to the CPU's diode
+		 *
+		 * Ideally we should use userspace thermal governor,
+		 * but it's a much more complex solution.  The "skin"
+		 * zone exists as a simpler solution which prevents
+		 * Transformers from getting too hot from a user's
+		 * tactile perspective. The CPU zone is intended to
+		 * protect silicon from damage.
+		 */
+
+		skin-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct72 0>;
+
+			trips {
+				trip0: skin-alert {
+					/* throttle at 57C until temperature drops to 56.8C */
+					temperature = <57000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip1: skin-crit {
+					/* shut down at 65C */
+					temperature = <65000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&trip0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT
+								  THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct72 1>;
+
+			trips {
+				trip2: cpu-alert {
+					/* throttle at 75C until temperature drops to 74.8C */
+					temperature = <75000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip3: cpu-crit {
+					/* shut down at 90C */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&trip2>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT
+								  THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-asus-tf700t.dts b/arch/arm/boot/dts/nvidia/tegra30-asus-tf700t.dts
new file mode 100644
index 000000000000..9c480fde2e76
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-tf700t.dts
@@ -0,0 +1,840 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-asus-transformer-common.dtsi"
+
+/ {
+	model = "Asus Transformer Infinity TF700T";
+	compatible = "asus,tf700t", "nvidia,tegra30";
+
+	host1x@50000000 {
+		lcd: dc@54200000 {
+			clocks = <&tegra_car TEGRA30_CLK_DISP1>,
+				 <&tegra_car TEGRA30_CLK_PLL_D_OUT0>;
+
+			rgb {
+				status = "okay";
+
+				port {
+					dpi_output: endpoint {
+						remote-endpoint = <&bridge_input>;
+						bus-width = <24>;
+					};
+				};
+			};
+		};
+	};
+
+	pinmux@70000868 {
+		state_default: pinmux {
+			lcd_pwr2_pc6 {
+				nvidia,pins = "lcd_pwr2_pc6",
+						"lcd_dc1_pd2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spi2_mosi_px0 {
+				nvidia,pins = "spi2_mosi_px0";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb7 {
+				nvidia,pins = "pbb7";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_cs4_n_pk2 {
+				nvidia,pins = "gmi_cs4_n_pk2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+		};
+	};
+
+	serial@70006200 {
+		/* Azurewave AW-NH665 BCM4330B1 */
+		bluetooth {
+			compatible = "brcm,bcm4330-bt";
+		};
+	};
+
+	i2c@7000c400 {
+		/* Elantech ELAN-3024-7053 or 5184N FPC-1 REV: 2/3 touchscreen */
+		touchscreen@10 {
+			compatible = "elan,ektf3624";
+			reg = <0x10>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&gpio TEGRA_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+
+			vcc33-supply = <&vdd_3v3_sys>;
+			vccio-supply = <&vdd_3v3_sys>;
+
+			touchscreen-size-x = <2944>;
+			touchscreen-size-y = <1856>;
+			touchscreen-inverted-y;
+		};
+	};
+
+	i2c@7000c500 {
+		clock-frequency = <100000>;
+
+		magnetometer@e {
+			mount-matrix =   "1",  "0",  "0",
+					 "0", "-1",  "0",
+					 "0",  "0", "-1";
+		};
+
+		gyroscope@68 {
+			mount-matrix =   "0",  "1",  "0",
+					 "1",  "0",  "0",
+					 "0",  "0", "-1";
+
+			/* External I2C interface */
+			i2c-gate {
+				accelerometer@f {
+					mount-matrix =   "0", "-1",  "0",
+							"-1",  "0",  "0",
+							 "0",  "0",  "1";
+				};
+			};
+		};
+	};
+
+	i2c@7000d000 {
+		/* Realtek ALC5631 audio codec */
+		rt5631: audio-codec@1a {
+			compatible = "realtek,rt5631";
+			reg = <0x1a>;
+		};
+	};
+
+	memory-controller@7000f000 {
+		emc-timings-0 {
+			/* Micron 1GB 800MHZ */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x75830303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x74630303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000030
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000002 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x73c30504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000004 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0505 0x73840a06 0x001f0000 >;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+
+				nvidia,emem-configuration = < 0x00000006 0xc0000048
+					0x00000001 0x00000002 0x00000009 0x00000005
+					0x00000007 0x00000001 0x00000002 0x00000008
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000d0709 0x7086120a 0x001f0000 >;
+			};
+
+			timing-800000000 {
+				clock-frequency = <800000000>;
+
+				nvidia,emem-configuration = < 0x0000000c 0xc0000090
+					0x00000004 0x00000005 0x00000013 0x0000000c
+					0x0000000f 0x00000002 0x00000003 0x0000000c
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00160d13 0x712c2414 0x001f0000 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* Elpida 1GB 800MHZ */
+			nvidia,ram-code = <1>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x75830303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x74630303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000030
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000002 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x73c30504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000004 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0505 0x73840a06 0x001f0000 >;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+
+				nvidia,emem-configuration = < 0x00000006 0xc0000048
+					0x00000001 0x00000002 0x00000009 0x00000005
+					0x00000007 0x00000001 0x00000002 0x00000008
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000d0709 0x7086120a 0x001f0000 >;
+			};
+
+			timing-800000000 {
+				clock-frequency = <800000000>;
+
+				nvidia,emem-configuration = < 0x0000000c 0xc0000090
+					0x00000004 0x00000005 0x00000013 0x0000000c
+					0x0000000f 0x00000002 0x00000003 0x0000000c
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00160d13 0x712c2414 0x001f0000 >;
+			};
+		};
+	};
+
+	memory-controller@7000f400 {
+		emc-timings-0 {
+			/* Micron 1GB 800MHZ */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000006 0x00000000 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x000000c0 0x00000000 0x00000030
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000007 0x00000007
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x000000c7 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x0000000d 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x0000000e 0x0000000e
+					0x00000004 0x00000003 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000004
+					0x0000001a 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x0000001c 0x0000001c
+					0x00000004 0x00000005 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000009
+					0x00000035 0x00000007 0x00000002 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000006 0x00000004 0x0000000a
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000038 0x00000038
+					0x00000004 0x00000009 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000007 0x00000004
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-reset = <0x80000521>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x00000012
+					0x00000066 0x0000000c 0x00000004 0x00000003
+					0x00000008 0x00000002 0x0000000a 0x00000004
+					0x00000004 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x00000bf0 0x00000000 0x000002fc
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000008 0x0000000f 0x0000006c 0x00000200
+					0x00000004 0x00000010 0x00000000 0x00000004
+					0x00000005 0x00000c30 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007088 0x001d0084
+					0x00008000 0x00044000 0x00044000 0x00044000
+					0x00044000 0x00014000 0x00014000 0x00014000
+					0x00014000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00048000 0x00048000 0x00048000
+					0x00048000 0x000002a0 0x0600013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x0158000c 0xa0f10000 0x00000000
+					0x00000000 0x800018c8 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-800000000 {
+				clock-frequency = <800000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-reset = <0x80000d71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000025
+					0x000000ce 0x0000001a 0x00000009 0x00000005
+					0x0000000d 0x00000004 0x00000013 0x00000009
+					0x00000009 0x00000004 0x00000001 0x00000000
+					0x00000007 0x0000000a 0x00000009 0x0000000a
+					0x00000011 0x00001820 0x00000000 0x00000608
+					0x00000003 0x00000012 0x00000001 0x00000000
+					0x0000000f 0x00000018 0x000000d8 0x00000200
+					0x00000005 0x00000020 0x00000000 0x00000007
+					0x00000008 0x00001860 0x0000000b 0x00000006
+					0x00000000 0x00000000 0x00005088 0xf0070191
+					0x00008000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00018000 0x00018000 0x00018000
+					0x00018000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x000002a0 0x0800013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x00f0000c 0xa0f10000 0x00000000
+					0x00000000 0x8000308c 0xe8000000 0xff00ff49 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* Elpida 1GB 800MHZ */
+			nvidia,ram-code = <1>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000006 0x00000000 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x000000c0 0x00000000 0x00000030
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000007 0x00000007
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x000000c7 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x0000000d 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x0000000e 0x0000000e
+					0x00000004 0x00000003 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000004
+					0x0000001a 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x0000001c 0x0000001c
+					0x00000004 0x00000005 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000009
+					0x00000035 0x00000007 0x00000002 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000006 0x00000004 0x0000000a
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000038 0x00000038
+					0x00000004 0x00000009 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000007 0x00000004
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-reset = <0x80000521>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x00000012
+					0x00000066 0x0000000c 0x00000004 0x00000003
+					0x00000008 0x00000002 0x0000000a 0x00000004
+					0x00000004 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x00000bf0 0x00000000 0x000002fc
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000008 0x0000000f 0x0000006c 0x00000200
+					0x00000004 0x00000010 0x00000000 0x00000004
+					0x00000005 0x00000c30 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007088 0x001d0084
+					0x00008000 0x00044000 0x00044000 0x00044000
+					0x00044000 0x00014000 0x00014000 0x00014000
+					0x00014000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00048000 0x00048000 0x00048000
+					0x00048000 0x000002a0 0x0600013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x0158000c 0xa0f10000 0x00000000
+					0x00000000 0x800018c8 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-800000000 {
+				clock-frequency = <800000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-reset = <0x80000d71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000025
+					0x000000ce 0x0000001a 0x00000009 0x00000005
+					0x0000000d 0x00000004 0x00000013 0x00000009
+					0x00000009 0x00000004 0x00000001 0x00000000
+					0x00000007 0x0000000a 0x00000009 0x0000000a
+					0x00000011 0x00001820 0x00000000 0x00000608
+					0x00000003 0x00000012 0x00000001 0x00000000
+					0x0000000f 0x00000018 0x000000d8 0x00000200
+					0x00000005 0x00000020 0x00000000 0x00000007
+					0x00000008 0x00001860 0x0000000b 0x00000006
+					0x00000000 0x00000000 0x00005088 0xf0070191
+					0x00008000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00018000 0x00018000 0x00018000
+					0x00018000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x000002a0 0x0a00013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x00f0000c 0xa0f10000 0x00000000
+					0x00000000 0x8000308c 0xe8000000 0xff00ff49 >;
+			};
+		};
+	};
+
+	tc358768_refclk: clock-tc358768 {
+		compatible = "fixed-clock";
+		clock-frequency = <23100000>;
+		clock-accuracy = <100>;
+		#clock-cells = <0>;
+	};
+
+	tc358768_osc: clock-tc358768-osc-gate {
+		compatible = "gpio-gate-clock";
+		enable-gpios = <&gpio TEGRA_GPIO(D, 2) GPIO_ACTIVE_HIGH>;
+		clocks = <&tc358768_refclk>;
+		#clock-cells = <0>;
+	};
+
+	haptic-feedback {
+		compatible = "gpio-vibrator";
+		enable-gpios = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
+		vcc-supply = <&vdd_3v3_sys>;
+	};
+
+	i2c-mux {
+		compatible = "i2c-mux-gpio";
+
+		mux-gpios = <&gpio TEGRA_GPIO(X, 0) GPIO_ACTIVE_HIGH>;
+		i2c-parent = <&lcd_ddc>;
+		idle-state = <0x0>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dsi@7 {
+				compatible = "toshiba,tc358768";
+				reg = <0x7>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				clocks = <&tc358768_osc>;
+				clock-names = "refclk";
+
+				reset-gpios = <&gpio TEGRA_GPIO(N, 6) GPIO_ACTIVE_LOW>;
+
+				vddc-supply = <&vdd_1v2_mipi>;
+				vddio-supply = <&vdd_1v8_vio>;
+				vddmipi-supply = <&vdd_1v2_mipi>;
+
+				/*
+				 * Panasonic VVX10F004B00 or HYDIS HV101WU1-1E1
+				 * LCD SuperIPS+ Full HD panel.
+				 */
+				panel@1 {
+					compatible = "panasonic,vvx10f004b00";
+					reg = <1>;
+
+					power-supply = <&vdd_pnl>;
+					backlight = <&backlight>;
+
+					port {
+						panel_input: endpoint {
+							remote-endpoint = <&bridge_output>;
+						};
+					};
+				};
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						bridge_input: endpoint {
+							remote-endpoint = <&dpi_output>;
+							data-lines = <24>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						bridge_output: endpoint {
+							remote-endpoint = <&panel_input>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	opp-table-actmon {
+		/delete-node/ opp-900000000;
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-900000000-1350;
+	};
+
+	vdd_1v2_mipi: regulator-mipi {
+		compatible = "regulator-fixed";
+		regulator-name = "tc358768_1v2_vdd";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-enable-ramp-delay = <10000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(BB, 3) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	sound {
+		compatible = "asus,tegra-audio-rt5631-tf700t",
+			     "nvidia,tegra-audio-rt5631";
+		nvidia,model = "Asus Transformer Infinity TF700T RT5631";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOL",
+			"Headphone Jack", "HPOR",
+			"Int Spk", "SPOL",
+			"Int Spk", "SPOR",
+			"MIC1", "MIC Bias1",
+			"MIC Bias1", "Mic Jack",
+			"DMIC", "Int Mic";
+
+		nvidia,audio-codec = <&rt5631>;
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-asus-transformer-common.dtsi b/arch/arm/boot/dts/nvidia/tegra30-asus-transformer-common.dtsi
new file mode 100644
index 000000000000..ead95306840f
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-transformer-common.dtsi
@@ -0,0 +1,1790 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "tegra30.dtsi"
+#include "tegra30-cpu-opp.dtsi"
+#include "tegra30-cpu-opp-microvolt.dtsi"
+
+/ {
+	chassis-type = "convertible";
+
+	aliases {
+		mmc0 = "/mmc@78000600"; /* eMMC */
+		mmc1 = "/mmc@78000000"; /* uSD slot */
+		mmc2 = "/mmc@78000400"; /* WiFi */
+
+		rtc0 = &pmic;
+		rtc1 = "/rtc@7000e000";
+
+		display0 = &lcd;
+		display1 = &hdmi;
+
+		serial1 = &uartc; /* Bluetooth */
+		serial2 = &uartb; /* GPS */
+	};
+
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	firmware {
+		trusted-foundations {
+			compatible = "tlm,trusted-foundations";
+			tlm,version-major = <2>;
+			tlm,version-minor = <8>;
+		};
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		linux,cma@80000000 {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0x80000000 0x30000000>;
+			size = <0x10000000>;		/* 256MiB */
+			linux,cma-default;
+			reusable;
+		};
+
+		ramoops@beb00000 {
+			compatible = "ramoops";
+			reg = <0xbeb00000 0x10000>;	/* 64kB */
+			console-size = <0x8000>;	/* 32kB */
+			record-size = <0x400>;		/*  1kB */
+			ecc-size = <16>;
+		};
+
+		trustzone@bfe00000 {
+			reg = <0xbfe00000 0x200000>;	/* 2MB */
+			no-map;
+		};
+	};
+
+	host1x@50000000 {
+		hdmi: hdmi@54280000 {
+			status = "okay";
+
+			hdmi-supply = <&hdmi_5v0_sys>;
+			pll-supply = <&vdd_1v8_vio>;
+			vdd-supply = <&vdd_3v3_sys>;
+
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+		};
+	};
+
+	gpio@6000d000 {
+		init-lpm-in-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(B, 1) GPIO_ACTIVE_HIGH>;
+			input;
+		};
+
+		init-lpm-out-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(K, 7) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
+
+		usb-charge-limit-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
+			output-high;
+		};
+	};
+
+	vde@6001a000 {
+		assigned-clocks = <&tegra_car TEGRA30_CLK_VDE>;
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_P>;
+		assigned-clock-rates = <408000000>;
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* SDMMC1 pinmux */
+			sdmmc1_clk {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc1_cmd {
+				nvidia,pins = "sdmmc1_dat3_py4",
+						"sdmmc1_dat2_py5",
+						"sdmmc1_dat1_py6",
+						"sdmmc1_dat0_py7",
+						"sdmmc1_cmd_pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc1_cd {
+				nvidia,pins = "gmi_iordy_pi5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc1_wp {
+				nvidia,pins = "vi_d11_pt3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* SDMMC2 pinmux */
+			vi_d1_pd5 {
+				nvidia,pins = "vi_d1_pd5",
+						"vi_d2_pl0",
+						"vi_d3_pl1",
+						"vi_d5_pl3",
+						"vi_d7_pl5";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vi_d8_pl6 {
+				nvidia,pins = "vi_d8_pl6",
+						"vi_d9_pl7";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+				nvidia,io-reset = <0>;
+			};
+
+			/* SDMMC3 pinmux */
+			sdmmc3_clk {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc3_cmd {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+						"sdmmc3_dat0_pb7",
+						"sdmmc3_dat1_pb6",
+						"sdmmc3_dat2_pb5",
+						"sdmmc3_dat3_pb4",
+						"sdmmc3_dat4_pd1",
+						"sdmmc3_dat5_pd0",
+						"sdmmc3_dat6_pd3",
+						"sdmmc3_dat7_pd4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* SDMMC4 pinmux */
+			sdmmc4_clk {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc4_cmd {
+				nvidia,pins = "sdmmc4_cmd_pt7",
+						"sdmmc4_dat0_paa0",
+						"sdmmc4_dat1_paa1",
+						"sdmmc4_dat2_paa2",
+						"sdmmc4_dat3_paa3",
+						"sdmmc4_dat4_paa4",
+						"sdmmc4_dat5_paa5",
+						"sdmmc4_dat6_paa6",
+						"sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc4_rst_n {
+				nvidia,pins = "sdmmc4_rst_n_pcc3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			cam_mclk {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			drive_sdmmc4 {
+				nvidia,pins = "drive_gma",
+						"drive_gmb",
+						"drive_gmc",
+						"drive_gmd";
+				nvidia,pull-down-strength = <9>;
+				nvidia,pull-up-strength = <9>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+
+			/* I2C pinmux */
+			gen1_i2c {
+				nvidia,pins = "gen1_i2c_scl_pc4",
+						"gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+
+			gen2_i2c {
+				nvidia,pins = "gen2_i2c_scl_pt5",
+						"gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+
+			cam_i2c {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+						"cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+
+			ddc_i2c {
+				nvidia,pins = "ddc_scl_pv4",
+						"ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+
+			pwr_i2c {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+						"pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+
+			hotplug_i2c {
+				nvidia,pins = "pu4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* HDMI pinmux */
+			hdmi_cec {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+
+			hdmi_hpd {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "hdmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* UART-A */
+			ulpi_data0_po1 {
+				nvidia,pins = "ulpi_data0_po1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ulpi_data1_po2 {
+				nvidia,pins = "ulpi_data1_po2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ulpi_data5_po6 {
+				nvidia,pins = "ulpi_data5_po6";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ulpi_data7_po0 {
+				nvidia,pins = "ulpi_data7_po0",
+						"ulpi_data2_po3",
+						"ulpi_data3_po4",
+						"ulpi_data4_po5",
+						"ulpi_data6_po7";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* UART-B */
+			uartb_txd_rts {
+				nvidia,pins = "uart2_txd_pc2",
+						"uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			uartb_rxd_cts {
+				nvidia,pins = "uart2_rxd_pc3",
+						"uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* UART-C */
+			uartc_rxd_cts {
+				nvidia,pins = "uart3_cts_n_pa1",
+						"uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			uartc_txd_rts {
+				nvidia,pins = "uart3_rts_n_pc0",
+						"uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* UART-D */
+			ulpi_nxt_py2 {
+				nvidia,pins = "ulpi_nxt_py2";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ulpi_clk_py0 {
+				nvidia,pins = "ulpi_clk_py0",
+						"ulpi_dir_py1",
+						"ulpi_stp_py3";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* I2S pinmux */
+			dap_i2s0 {
+				nvidia,pins = "dap1_fs_pn0",
+						"dap1_din_pn1",
+						"dap1_dout_pn2",
+						"dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap_i2s1 {
+				nvidia,pins = "dap2_fs_pa2",
+						"dap2_sclk_pa3",
+						"dap2_din_pa4",
+						"dap2_dout_pa5";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap3_fs {
+				nvidia,pins = "dap3_fs_pp0",
+						"dap3_din_pp1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap3_dout {
+				nvidia,pins = "dap3_dout_pp2",
+						"dap3_sclk_pp3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap_i2s3 {
+				nvidia,pins = "dap4_fs_pp4",
+						"dap4_din_pp5",
+						"dap4_dout_pp6",
+						"dap4_sclk_pp7";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Sensors pinmux */
+			nct_irq {
+				nvidia,pins = "pcc2";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Asus EC pinmux */
+			ec_irqs {
+				nvidia,pins = "kb_row10_ps2",
+						"kb_row15_ps7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ec_reqs {
+				nvidia,pins = "kb_col1_pq1";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Memory type bootstrap */
+			mem_boostraps {
+				nvidia,pins = "gmi_ad4_pg4",
+						"gmi_ad5_pg5";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* PCI-e pinmux */
+			pex_l2_rst_n {
+				nvidia,pins = "pex_l2_rst_n_pcc6",
+						"pex_l0_rst_n_pdd1",
+						"pex_l1_rst_n_pdd5";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pex_l2_clkreq_n {
+				nvidia,pins = "pex_l2_clkreq_n_pcc7",
+						"pex_l0_prsnt_n_pdd0",
+						"pex_l0_clkreq_n_pdd2",
+						"pex_wake_n_pdd3",
+						"pex_l1_prsnt_n_pdd4",
+						"pex_l1_clkreq_n_pdd6",
+						"pex_l2_prsnt_n_pdd7";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* SPI pinmux */
+			spi1_mosi_px4 {
+				nvidia,pins = "spi1_mosi_px4",
+						"spi1_sck_px5",
+						"spi1_cs0_n_px6",
+						"spi1_miso_px7";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			hp_detect {
+				nvidia,pins = "spi2_cs1_n_pw2";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			mic_detect {
+				nvidia,pins = "spi2_sck_px2";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_a17_pb0 {
+				nvidia,pins = "gmi_a17_pb0",
+						"gmi_a16_pj7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_a18_pb1 {
+				nvidia,pins = "gmi_a18_pb1";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_a19_pk7 {
+				nvidia,pins = "gmi_a19_pk7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Display A pinmux */
+			lcd_pwr0_pb2 {
+				nvidia,pins = "lcd_pwr0_pb2",
+						"lcd_pclk_pb3",
+						"lcd_pwr1_pc1",
+						"lcd_d0_pe0",
+						"lcd_d1_pe1",
+						"lcd_d2_pe2",
+						"lcd_d3_pe3",
+						"lcd_d4_pe4",
+						"lcd_d5_pe5",
+						"lcd_d6_pe6",
+						"lcd_d7_pe7",
+						"lcd_d8_pf0",
+						"lcd_d9_pf1",
+						"lcd_d10_pf2",
+						"lcd_d11_pf3",
+						"lcd_d12_pf4",
+						"lcd_d13_pf5",
+						"lcd_d14_pf6",
+						"lcd_d15_pf7",
+						"lcd_de_pj1",
+						"lcd_hsync_pj3",
+						"lcd_vsync_pj4",
+						"lcd_d16_pm0",
+						"lcd_d17_pm1",
+						"lcd_d18_pm2",
+						"lcd_d19_pm3",
+						"lcd_d20_pm4",
+						"lcd_d21_pm5",
+						"lcd_d22_pm6",
+						"lcd_d23_pm7",
+						"lcd_dc0_pn6",
+						"lcd_sdin_pz2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			lcd_cs0_n_pn4 {
+				nvidia,pins = "lcd_cs0_n_pn4",
+						"lcd_sdout_pn5",
+						"lcd_wr_n_pz3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			blink {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,function = "blink";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* KBC keys */
+			kb_col0_pq0 {
+				nvidia,pins = "kb_col0_pq0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_col1_pq1 {
+				nvidia,pins = "kb_row1_pr1",
+						"kb_row3_pr3",
+						"kb_row8_ps0",
+						"kb_row14_ps6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kb_col4_pq4 {
+				nvidia,pins = "kb_col4_pq4",
+						"kb_col5_pq5",
+						"kb_col7_pq7",
+						"kb_row2_pr2",
+						"kb_row4_pr4",
+						"kb_row5_pr5",
+						"kb_row12_ps4",
+						"kb_row13_ps5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_wp_n_pc7 {
+				nvidia,pins = "gmi_wp_n_pc7",
+						"gmi_wait_pi7",
+						"gmi_cs3_n_pk4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_cs0_n_pj0 {
+				nvidia,pins = "gmi_cs0_n_pj0",
+						"gmi_cs1_n_pj2",
+						"gmi_cs2_n_pk3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vi_pclk_pt0 {
+				nvidia,pins = "vi_pclk_pt0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+				nvidia,io-reset = <0>;
+			};
+
+			/* GPIO keys pinmux */
+			power_key {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vol_keys {
+				nvidia,pins = "kb_col2_pq2",
+						"kb_col3_pq3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Bluetooth */
+			bt_shutdown {
+				nvidia,pins = "pu0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			bt_dev_wake {
+				nvidia,pins = "pu1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			bt_host_wake {
+				nvidia,pins = "pu6";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pu2 {
+				nvidia,pins = "pu2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pcc1 {
+				nvidia,pins = "pcc1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pv2 {
+				nvidia,pins = "pv2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pv3 {
+				nvidia,pins = "pv3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_vsync_pd6 {
+				nvidia,pins = "vi_vsync_pd6",
+						"vi_hsync_pd7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+				nvidia,io-reset = <0>;
+			};
+
+			vi_d10_pt2 {
+				nvidia,pins = "vi_d10_pt2",
+						"vi_d0_pt4", "pbb0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kb_row0_pr0 {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad0_pg0 {
+				nvidia,pins = "gmi_ad0_pg0",
+						"gmi_ad1_pg1",
+						"gmi_ad2_pg2",
+						"gmi_ad3_pg3",
+						"gmi_ad6_pg6",
+						"gmi_ad7_pg7",
+						"gmi_wr_n_pi0",
+						"gmi_oe_n_pi1",
+						"gmi_dqs_pi2",
+						"gmi_adv_n_pk0",
+						"gmi_clk_pk1";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad13_ph5 {
+				nvidia,pins = "gmi_ad13_ph5";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_ad10_ph2 {
+				nvidia,pins = "gmi_ad10_ph2",
+						"gmi_ad11_ph3",
+						"gmi_ad14_ph6";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad12_ph4 {
+				nvidia,pins = "gmi_ad12_ph4",
+						"gmi_rst_n_pi4",
+						"gmi_cs7_n_pi6";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Vibrator control */
+			vibrator {
+				nvidia,pins = "gmi_ad15_ph7";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* PWM pimnmux */
+			pwm_0 {
+				nvidia,pins = "gmi_ad8_ph0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pwm_2 {
+				nvidia,pins = "pu5";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_cs6_n_pi3 {
+				nvidia,pins = "gmi_cs6_n_pi3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Spdif pinmux */
+			spdif_out {
+				nvidia,pins = "spdif_out_pk5";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spdif_in {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vi_d4_pl2 {
+				nvidia,pins = "vi_d4_pl2";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d6_pl4 {
+				nvidia,pins = "vi_d6_pl4";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <0>;
+				nvidia,io-reset = <0>;
+			};
+
+			vi_mclk_pt1 {
+				nvidia,pins = "vi_mclk_pt1";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			jtag_rtck {
+				nvidia,pins = "jtag_rtck_pu7";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			crt_hsync_pv6 {
+				nvidia,pins = "crt_hsync_pv6",
+						"crt_vsync_pv7";
+				nvidia,function = "crt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk1_out {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk2_out {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "extperiph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk3_out {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sys_clk_req {
+				nvidia,pins = "sys_clk_req_pz5";
+				nvidia,function = "sysclk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb4 {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pbb5 {
+				nvidia,pins = "pbb5";
+				nvidia,function = "vgp5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pbb6 {
+				nvidia,pins = "pbb6";
+				nvidia,function = "vgp6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk2_req_pcc5 {
+				nvidia,pins = "clk2_req_pcc5",
+						"clk1_req_pee2";
+				nvidia,function = "dap";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk3_req_pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "dev3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* GPIO power/drive control */
+			drive_dap1 {
+				nvidia,pins = "drive_dap1",
+						"drive_dap2",
+						"drive_dbg",
+						"drive_at5",
+						"drive_gme",
+						"drive_ddc",
+						"drive_ao1",
+						"drive_uart3";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+
+			drive_sdio1 {
+				nvidia,pins = "drive_sdio1",
+						"drive_sdio3";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <46>;
+				nvidia,pull-up-strength = <42>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FAST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FAST>;
+			};
+		};
+	};
+
+	serial@70006040 {
+		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
+		status = "okay";
+
+		/* Broadcom GPS BCM47511 */
+	};
+
+	serial@70006200 {
+		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
+		status = "okay";
+
+		nvidia,adjust-baud-rates = <0 9600 100>,
+					   <9600 115200 200>,
+					   <1000000 4000000 136>;
+
+		bluetooth {
+			max-speed = <4000000>;
+
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+			clock-names = "txco";
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "host-wakeup";
+
+			device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
+			shutdown-gpios =      <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
+
+			vbat-supply  = <&vdd_3v3_com>;
+			vddio-supply = <&vdd_1v8_vio>;
+		};
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	lcd_ddc: i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+
+		/* Aichi AMI306 digital compass */
+		magnetometer@e {
+			compatible = "asahi-kasei,ak8974";
+			reg = <0x0e>;
+
+			avdd-supply = <&vdd_3v3_sys>;
+			dvdd-supply = <&vdd_1v8_vio>;
+		};
+
+		/* Dynaimage ambient light sensor */
+		light-sensor@1c {
+			compatible = "dynaimage,al3010";
+			reg = <0x1c>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(Z, 2) IRQ_TYPE_LEVEL_HIGH>;
+
+			vdd-supply = <&vdd_3v3_sys>;
+		};
+
+		gyroscope@68 {
+			compatible = "invensense,mpu3050";
+			reg = <0x68>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 1) IRQ_TYPE_EDGE_RISING>;
+
+			vdd-supply    = <&vdd_3v3_sys>;
+			vlogic-supply = <&vdd_1v8_vio>;
+
+			i2c-gate {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				accelerometer@f {
+					compatible = "kionix,kxtf9";
+					reg = <0x0f>;
+
+					interrupt-parent = <&gpio>;
+					interrupts = <TEGRA_GPIO(O, 5) IRQ_TYPE_EDGE_RISING>;
+
+					vdd-supply = <&vdd_1v8_vio>;
+					vddio-supply = <&vdd_1v8_vio>;
+				};
+			};
+		};
+	};
+
+	hdmi_ddc: i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <93750>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* Texas Instruments TPS659110 PMIC */
+		pmic: pmic@2d {
+			compatible = "ti,tps65911";
+			reg = <0x2d>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			wakeup-source;
+
+			ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>;
+			ti,system-power-controller;
+			ti,sleep-keep-ck32k;
+			ti,sleep-enable;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			vcc1-supply = <&vdd_5v0_bat>;
+			vcc2-supply = <&vdd_5v0_bat>;
+			vcc3-supply = <&vdd_1v8_vio>;
+			vcc4-supply = <&vdd_5v0_sys>;
+			vcc5-supply = <&vdd_5v0_bat>;
+			vcc6-supply = <&vdd_3v3_sys>;
+			vcc7-supply = <&vdd_5v0_bat>;
+			vccio-supply = <&vdd_5v0_bat>;
+
+			pmic-sleep-hog {
+				gpio-hog;
+				gpios = <2 GPIO_ACTIVE_HIGH>;
+				output-high;
+			};
+
+			regulators {
+				/* VDD1 is not used by Transformers */
+
+				vddio_ddr: vdd2 {
+					regulator-name = "vddio_ddr";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_cpu: vddctrl {
+					regulator-name = "vdd_cpu,vdd_sys";
+					regulator-min-microvolt = <600000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-coupled-with = <&vdd_core>;
+					regulator-coupled-max-spread = <300000>;
+					regulator-max-step-microvolt = <100000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ti,regulator-ext-sleep-control = <1>;
+
+					nvidia,tegra-cpu-regulator;
+				};
+
+				vdd_1v8_vio: vio {
+					regulator-name = "vdd_1v8_gen";
+					/* FIXME: eMMC won't work, if set to 1.8 V */
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				/* eMMC VDD */
+				vcore_emmc: ldo1 {
+					regulator-name = "vdd_emmc_core";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				/* uSD slot VDD */
+				vdd_usd: ldo2 {
+					regulator-name = "vdd_usd";
+					regulator-min-microvolt = <3100000>;
+					regulator-max-microvolt = <3100000>;
+					/* FIXME: Without this, voltage switching fails */
+					regulator-always-on;
+				};
+
+				/* uSD slot VDDIO */
+				vddio_usd: ldo3 {
+					regulator-name = "vddio_usd";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3100000>;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				/* LDO5 is not used by Transformers */
+
+				ldo6 {
+					regulator-name = "avdd_dsi_csi,pwrdet_mipi";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo7 {
+					regulator-name = "vdd_pllm,x,u,a_p_c_s";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ti,regulator-ext-sleep-control = <8>;
+				};
+
+				ldo8 {
+					regulator-name = "vdd_ddr_hs";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					ti,regulator-ext-sleep-control = <8>;
+				};
+			};
+		};
+
+		nct72: temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_EDGE_FALLING>;
+
+			vcc-supply = <&vdd_3v3_sys>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		vdd_core: core-regulator@60 {
+			compatible = "ti,tps62361";
+			reg = <0x60>;
+
+			regulator-name = "tps62361-vout";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1770000>;
+			regulator-coupled-with = <&vdd_cpu>;
+			regulator-coupled-max-spread = <300000>;
+			regulator-max-step-microvolt = <100000>;
+			regulator-boot-on;
+			regulator-always-on;
+			ti,enable-vout-discharge;
+			ti,vsel0-state-high;
+			ti,vsel1-state-high;
+
+			nvidia,tegra-core-regulator;
+		};
+	};
+
+	pmc@7000e400 {
+		status = "okay";
+		nvidia,invert-interrupt;
+		/* FIXME: LP1 doesn't work at the moment */
+		nvidia,suspend-mode = <2>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <200>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <0>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
+
+		/* Set DEV_OFF + PWR_OFF_SET bit in DCDC control register of TPS65911 PMIC  */
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <4>;
+			nvidia,bus-addr = <0x2d>;
+			nvidia,reg-addr = <0x3f>;
+			nvidia,reg-data = <0x81>;
+		};
+	};
+
+	hda@70030000 {
+		status = "okay";
+	};
+
+	ahub@70080000 {
+		i2s@70080400 {		/* i2s1 */
+			status = "okay";
+		};
+
+		/* BT SCO */
+		i2s@70080600 {		/* i2s3 */
+			status = "okay";
+		};
+	};
+
+	mmc@78000000 {
+		status = "okay";
+
+		/* FIXME: Full 208Mhz clock rate doesn't work reliably */
+		max-frequency = <104000000>;
+
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		bus-width = <4>;
+
+		vmmc-supply = <&vdd_usd>;	/* ldo2 */
+		vqmmc-supply = <&vddio_usd>;	/* ldo3 */
+	};
+
+	mmc@78000400 {
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_SDMMC3>;
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_C>;
+		assigned-clock-rates = <50000000>;
+
+		max-frequency = <50000000>;
+		keep-power-in-suspend;
+		bus-width = <4>;
+		non-removable;
+
+		mmc-pwrseq = <&brcm_wifi_pwrseq>;
+		vmmc-supply = <&vdd_3v3_com>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+
+		/* Azurewave AW-NH615 BCM4329B1 or AW-NH665 BCM4330B1 */
+		wifi@1 {
+			compatible = "brcm,bcm4329-fmac";
+			reg = <1>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host-wake";
+		};
+	};
+
+	mmc@78000600 {
+		status = "okay";
+		bus-width = <8>;
+		vmmc-supply = <&vcore_emmc>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+		mmc-ddr-3_3v;
+		non-removable;
+	};
+
+	/* USB via ASUS connector */
+	usb@7d000000 {
+		compatible = "nvidia,tegra30-udc";
+		status = "okay";
+		dr_mode = "peripheral";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		dr_mode = "peripheral";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		vbus-supply = <&vdd_5v0_sys>;
+	};
+
+	/* Dock's USB port */
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&vdd_5v0_bat>;
+	};
+
+	mains: ac-adapter-detect {
+		compatible = "gpio-charger";
+		charger-type = "mains";
+		gpios = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_5v0_bl>;
+		pwms = <&pwm 0 4000000>;
+
+		brightness-levels = <1 255>;
+		num-interpolated-steps = <254>;
+		default-brightness-level = <40>;
+	};
+
+	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "pmic-oscillator";
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu1: cpu@1 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu2: cpu@2 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu3: cpu@3 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	extcon-keys {
+		compatible = "gpio-keys";
+
+		switch-dock-hall-sensor {
+			label = "Lid sensor";
+			gpios = <&gpio TEGRA_GPIO(S, 6) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			debounce-interval = <500>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		switch-lineout-detect {
+			label = "Audio dock line-out detect";
+			gpios = <&gpio TEGRA_GPIO(X, 3) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LINEOUT_INSERT>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(Q, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	vdd_5v0_bat: regulator-bat {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_ac_bat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_5v0_cp: regulator-sby {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_sby";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	vdd_5v0_sys: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	vdd_1v5_ddr: regulator-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_ddr";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	vdd_3v3_sys: regulator-3v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	vdd_pnl: regulator-panel {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_panel";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-enable-ramp-delay = <20000>;
+		gpio = <&gpio TEGRA_GPIO(W, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_3v3_com: regulator-com {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_com";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_5v0_bl: regulator-bl {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_bl";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	hdmi_5v0_sys: regulator-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "hdmi_5v0_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	sound {
+		nvidia,i2s-controller = <&tegra_i2s1>;
+
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+		nvidia,mic-det-gpios = <&gpio TEGRA_GPIO(X, 2) GPIO_ACTIVE_LOW>;
+		nvidia,coupled-mic-hp-det;
+
+		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA30_CLK_EXTERN1>;
+	};
+
+	thermal-zones {
+		/*
+		 * NCT72 has two sensors:
+		 *
+		 *	0: internal that monitors ambient/skin temperature
+		 *	1: external that is connected to the CPU's diode
+		 *
+		 * Ideally we should use userspace thermal governor,
+		 * but it's a much more complex solution.  The "skin"
+		 * zone exists as a simpler solution which prevents
+		 * Transformers from getting too hot from a user's
+		 * tactile perspective. The CPU zone is intended to
+		 * protect silicon from damage.
+		 */
+
+		skin-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct72 0>;
+
+			trips {
+				trip0: skin-alert {
+					/* throttle at 57C until temperature drops to 56.8C */
+					temperature = <57000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip1: skin-crit {
+					/* shut down at 65C */
+					temperature = <65000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&trip0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT
+								  THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct72 1>;
+
+			trips {
+				trip2: cpu-alert {
+					/* throttle at 75C until temperature drops to 74.8C */
+					temperature = <75000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip3: cpu-crit {
+					/* shut down at 90C */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&trip2>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT
+								  THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	brcm_wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+
+		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+		clock-names = "ext_clock";
+
+		reset-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <300>;
+		power-off-delay-us = <300>;
+	};
+};
diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/nvidia/tegra30-beaver.dts
index e159feeedef7..1d74179dde79 100644
--- a/arch/arm/boot/dts/tegra30-beaver.dts
+++ b/arch/arm/boot/dts/nvidia/tegra30-beaver.dts
@@ -1733,6 +1733,8 @@
 	};
 
 	serial@70006000 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
@@ -1898,7 +1900,8 @@
 	spi@7000da00 {
 		status = "okay";
 		spi-max-frequency = <25000000>;
-		spi-flash@1 {
+
+		flash@1 {
 			compatible = "winbond,w25q32", "jedec,spi-nor";
 			reg = <1>;
 			spi-max-frequency = <20000000>;
@@ -1915,6 +1918,7 @@
 		nvidia,core-pwr-off-time = <0>;
 		nvidia,core-power-req-active-high;
 		nvidia,sys-clock-req-active-high;
+		core-supply = <&core_vdd_reg>;
 	};
 
 	ahub@70080000 {
@@ -1966,12 +1970,34 @@
 		status = "okay";
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
 	};
 
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&vddctrl_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu@1 {
+			cpu-supply = <&vddctrl_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu@2 {
+			cpu-supply = <&vddctrl_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu@3 {
+			cpu-supply = <&vddctrl_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+	};
+
 	gpio-leds {
 		compatible = "gpio-leds";
 
@@ -1985,7 +2011,7 @@
 		};
 	};
 
-	vdd_5v_in_reg: regulator@0 {
+	vdd_5v_in_reg: regulator-5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_5v_in";
 		regulator-min-microvolt = <5000000>;
@@ -1993,7 +2019,7 @@
 		regulator-always-on;
 	};
 
-	chargepump_5v_reg: regulator@1 {
+	chargepump_5v_reg: regulator-chargepump {
 		compatible = "regulator-fixed";
 		regulator-name = "chargepump_5v";
 		regulator-min-microvolt = <5000000>;
@@ -2004,7 +2030,7 @@
 		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
 	};
 
-	ddr_reg: regulator@2 {
+	ddr_reg: regulator-ddr {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_ddr";
 		regulator-min-microvolt = <1500000>;
@@ -2016,7 +2042,7 @@
 		vin-supply = <&vdd_5v_in_reg>;
 	};
 
-	vdd_5v_sata_reg: regulator@3 {
+	vdd_5v_sata_reg: regulator-sata {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_5v_sata";
 		regulator-min-microvolt = <5000000>;
@@ -2028,7 +2054,7 @@
 		vin-supply = <&vdd_5v_in_reg>;
 	};
 
-	usb1_vbus_reg: regulator@4 {
+	usb1_vbus_reg: regulator-usb1 {
 		compatible = "regulator-fixed";
 		regulator-name = "usb1_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -2039,7 +2065,7 @@
 		vin-supply = <&vdd_5v_in_reg>;
 	};
 
-	usb3_vbus_reg: regulator@5 {
+	usb3_vbus_reg: regulator-usb3 {
 		compatible = "regulator-fixed";
 		regulator-name = "usb3_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -2050,7 +2076,7 @@
 		vin-supply = <&vdd_5v_in_reg>;
 	};
 
-	sys_3v3_reg: regulator@6 {
+	sys_3v3_reg: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "sys_3v3,vdd_3v3_alw";
 		regulator-min-microvolt = <3300000>;
@@ -2062,7 +2088,7 @@
 		vin-supply = <&vdd_5v_in_reg>;
 	};
 
-	sys_3v3_pexs_reg: regulator@7 {
+	sys_3v3_pexs_reg: regulator-pexs {
 		compatible = "regulator-fixed";
 		regulator-name = "sys_3v3_pexs";
 		regulator-min-microvolt = <3300000>;
@@ -2074,7 +2100,7 @@
 		vin-supply = <&sys_3v3_reg>;
 	};
 
-	vdd_5v0_hdmi: regulator@8 {
+	vdd_5v0_hdmi: regulator-hdmi {
 		compatible = "regulator-fixed";
 		regulator-name = "+VDD_5V_HDMI";
 		regulator-min-microvolt = <5000000>;
@@ -2111,26 +2137,4 @@
 		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
 					 <&tegra_car TEGRA30_CLK_EXTERN1>;
 	};
-
-	cpus {
-		cpu0: cpu@0 {
-			cpu-supply = <&vddctrl_reg>;
-			operating-points-v2 = <&cpu0_opp_table>;
-		};
-
-		cpu@1 {
-			cpu-supply = <&vddctrl_reg>;
-			operating-points-v2 = <&cpu0_opp_table>;
-		};
-
-		cpu@2 {
-			cpu-supply = <&vddctrl_reg>;
-			operating-points-v2 = <&cpu0_opp_table>;
-		};
-
-		cpu@3 {
-			cpu-supply = <&vddctrl_reg>;
-			operating-points-v2 = <&cpu0_opp_table>;
-		};
-	};
 };
diff --git a/arch/arm/boot/dts/tegra30-cardhu-a02.dts b/arch/arm/boot/dts/nvidia/tegra30-cardhu-a02.dts
index 4899e05a0d9c..247185314f46 100644
--- a/arch/arm/boot/dts/tegra30-cardhu-a02.dts
+++ b/arch/arm/boot/dts/nvidia/tegra30-cardhu-a02.dts
@@ -16,7 +16,7 @@
 		keep-power-in-suspend;
 	};
 
-	ddr_reg: regulator@100 {
+	ddr_reg: regulator-ddr {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_ddr";
 		regulator-min-microvolt = <1500000>;
@@ -27,7 +27,7 @@
 		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
 	};
 
-	sys_3v3_reg: regulator@101 {
+	sys_3v3_reg: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "sys_3v3";
 		regulator-min-microvolt = <3300000>;
@@ -38,7 +38,7 @@
 		gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
 	};
 
-	usb1_vbus_reg: regulator@102 {
+	usb1_vbus_reg: regulator-usb1 {
 		compatible = "regulator-fixed";
 		regulator-name = "usb1_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -49,7 +49,7 @@
 		vin-supply = <&vdd_5v0_reg>;
 	};
 
-	usb3_vbus_reg: regulator@103 {
+	usb3_vbus_reg: regulator-usb3 {
 		compatible = "regulator-fixed";
 		regulator-name = "usb3_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -60,7 +60,7 @@
 		vin-supply = <&vdd_5v0_reg>;
 	};
 
-	vdd_5v0_reg: regulator@104 {
+	vdd_5v0_reg: regulator-5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "5v0";
 		regulator-min-microvolt = <5000000>;
@@ -69,7 +69,7 @@
 		gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
 	};
 
-	vdd_bl_reg: regulator@105 {
+	vdd_bl_reg: regulator-bl {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_bl";
 		regulator-min-microvolt = <5000000>;
diff --git a/arch/arm/boot/dts/tegra30-cardhu-a04.dts b/arch/arm/boot/dts/nvidia/tegra30-cardhu-a04.dts
index a11028b8b67b..2911f08863a0 100644
--- a/arch/arm/boot/dts/tegra30-cardhu-a04.dts
+++ b/arch/arm/boot/dts/nvidia/tegra30-cardhu-a04.dts
@@ -16,7 +16,7 @@
 		keep-power-in-suspend;
 	};
 
-	ddr_reg: regulator@100 {
+	ddr_reg: regulator-ddr {
 		compatible = "regulator-fixed";
 		regulator-name = "ddr";
 		regulator-min-microvolt = <1500000>;
@@ -27,7 +27,7 @@
 		gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
 	};
 
-	sys_3v3_reg: regulator@101 {
+	sys_3v3_reg: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "sys_3v3";
 		regulator-min-microvolt = <3300000>;
@@ -38,7 +38,7 @@
 		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
 	};
 
-	usb1_vbus_reg: regulator@102 {
+	usb1_vbus_reg: regulator-usb1 {
 		compatible = "regulator-fixed";
 		regulator-name = "usb1_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -49,7 +49,7 @@
 		vin-supply = <&vdd_5v0_reg>;
 	};
 
-	usb3_vbus_reg: regulator@103 {
+	usb3_vbus_reg: regulator-usb3 {
 		compatible = "regulator-fixed";
 		regulator-name = "usb3_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -60,7 +60,7 @@
 		vin-supply = <&vdd_5v0_reg>;
 	};
 
-	vdd_5v0_reg: regulator@104 {
+	vdd_5v0_reg: regulator-5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "5v0";
 		regulator-min-microvolt = <5000000>;
@@ -69,7 +69,7 @@
 		gpio = <&pmic 8 GPIO_ACTIVE_HIGH>;
 	};
 
-	vdd_bl_reg: regulator@105 {
+	vdd_bl_reg: regulator-bl {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_bl";
 		regulator-min-microvolt = <5000000>;
@@ -80,7 +80,7 @@
 		gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>;
 	};
 
-	vdd_bl2_reg: regulator@106 {
+	vdd_bl2_reg: regulator-bl2 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_bl2";
 		regulator-min-microvolt = <5000000>;
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/nvidia/tegra30-cardhu.dtsi
index 448f1397e64a..0120859d6d72 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra30-cardhu.dtsi
@@ -170,11 +170,15 @@
 	};
 
 	serial@70006000 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
 	serial@70006200 {
 		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
 		status = "okay";
 	};
 
@@ -209,7 +213,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x70>;
-			reset-gpio = <&gpio TEGRA_GPIO(BB, 0) GPIO_ACTIVE_LOW>;
+			reset-gpios = <&gpio TEGRA_GPIO(BB, 0) GPIO_ACTIVE_LOW>;
 		};
 	};
 
@@ -374,7 +378,8 @@
 	spi@7000da00 {
 		status = "okay";
 		spi-max-frequency = <25000000>;
-		spi-flash@1 {
+
+		flash@1 {
 			compatible = "winbond,w25q32", "jedec,spi-nor";
 			reg = <1>;
 			spi-max-frequency = <20000000>;
@@ -391,6 +396,7 @@
 		nvidia,core-pwr-off-time = <0>;
 		nvidia,core-power-req-active-high;
 		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
 	};
 
 	ahub@70080000 {
@@ -433,7 +439,7 @@
 		default-brightness-level = <6>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
@@ -465,6 +471,33 @@
 		};
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			interrupt-parent = <&pmic>;
+			interrupts = <2 0>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <100>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+		};
+	};
+
 	panel: panel {
 		compatible = "chunghwa,claa101wb01";
 		ddc-i2c-bus = <&panelddc>;
@@ -475,7 +508,7 @@
 		backlight = <&backlight>;
 	};
 
-	vdd_ac_bat_reg: regulator@0 {
+	vdd_ac_bat_reg: regulator-acbat {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_ac_bat";
 		regulator-min-microvolt = <5000000>;
@@ -483,7 +516,7 @@
 		regulator-always-on;
 	};
 
-	cam_1v8_reg: regulator@1 {
+	cam_1v8_reg: regulator-cam {
 		compatible = "regulator-fixed";
 		regulator-name = "cam_1v8";
 		regulator-min-microvolt = <1800000>;
@@ -493,7 +526,7 @@
 		vin-supply = <&vio_reg>;
 	};
 
-	cp_5v_reg: regulator@2 {
+	cp_5v_reg: regulator-5v0cp {
 		compatible = "regulator-fixed";
 		regulator-name = "cp_5v";
 		regulator-min-microvolt = <5000000>;
@@ -504,7 +537,7 @@
 		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
 	};
 
-	emmc_3v3_reg: regulator@3 {
+	emmc_3v3_reg: regulator-emmc {
 		compatible = "regulator-fixed";
 		regulator-name = "emmc_3v3";
 		regulator-min-microvolt = <3300000>;
@@ -516,7 +549,7 @@
 		vin-supply = <&sys_3v3_reg>;
 	};
 
-	modem_3v3_reg: regulator@4 {
+	modem_3v3_reg: regulator-modem {
 		compatible = "regulator-fixed";
 		regulator-name = "modem_3v3";
 		regulator-min-microvolt = <3300000>;
@@ -525,7 +558,7 @@
 		gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>;
 	};
 
-	pex_hvdd_3v3_reg: regulator@5 {
+	pex_hvdd_3v3_reg: regulator-pex {
 		compatible = "regulator-fixed";
 		regulator-name = "pex_hvdd_3v3";
 		regulator-min-microvolt = <3300000>;
@@ -535,7 +568,7 @@
 		vin-supply = <&sys_3v3_reg>;
 	};
 
-	vdd_cam1_ldo_reg: regulator@6 {
+	vdd_cam1_ldo_reg: regulator-cam1 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_cam1_ldo";
 		regulator-min-microvolt = <2800000>;
@@ -545,7 +578,7 @@
 		vin-supply = <&sys_3v3_reg>;
 	};
 
-	vdd_cam2_ldo_reg: regulator@7 {
+	vdd_cam2_ldo_reg: regulator-cam2 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_cam2_ldo";
 		regulator-min-microvolt = <2800000>;
@@ -555,7 +588,7 @@
 		vin-supply = <&sys_3v3_reg>;
 	};
 
-	vdd_cam3_ldo_reg: regulator@8 {
+	vdd_cam3_ldo_reg: regulator-cam3 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_cam3_ldo";
 		regulator-min-microvolt = <3300000>;
@@ -565,7 +598,7 @@
 		vin-supply = <&sys_3v3_reg>;
 	};
 
-	vdd_com_reg: regulator@9 {
+	vdd_com_reg: regulator-com {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_com";
 		regulator-min-microvolt = <3300000>;
@@ -577,7 +610,7 @@
 		vin-supply = <&sys_3v3_reg>;
 	};
 
-	vdd_fuse_3v3_reg: regulator@10 {
+	vdd_fuse_3v3_reg: regulator-fuse {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_fuse_3v3";
 		regulator-min-microvolt = <3300000>;
@@ -587,7 +620,7 @@
 		vin-supply = <&sys_3v3_reg>;
 	};
 
-	vdd_pnl1_reg: regulator@11 {
+	vdd_pnl1_reg: regulator-pnl1 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_pnl1";
 		regulator-min-microvolt = <3300000>;
@@ -599,7 +632,7 @@
 		vin-supply = <&sys_3v3_reg>;
 	};
 
-	vdd_vid_reg: regulator@12 {
+	vdd_vid_reg: regulator-vid {
 		compatible = "regulator-fixed";
 		regulator-name = "vddio_vid";
 		regulator-min-microvolt = <5000000>;
@@ -678,31 +711,4 @@
 			};
 		};
 	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power {
-			label = "Power";
-			interrupt-parent = <&pmic>;
-			interrupts = <2 0>;
-			linux,code = <KEY_POWER>;
-			debounce-interval = <100>;
-			wakeup-source;
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-			debounce-interval = <10>;
-		};
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-			debounce-interval = <10>;
-		};
-	};
 };
diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/nvidia/tegra30-colibri-eval-v3.dts
index 7d4a6ca4936a..1990bf8e122d 100644
--- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/nvidia/tegra30-colibri-eval-v3.dts
@@ -38,6 +38,8 @@
 
 	/* Colibri UART-A */
 	serial@70006000 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
 		status = "okay";
 	};
 
@@ -136,7 +138,7 @@
 		pwms = <&pwm 0 5000000>; /* PWM<A> */
 	};
 
-	clk16m: osc3 {
+	clk16m: clock-osc3 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <16000000>;
@@ -145,7 +147,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wakeup {
+		key-wakeup {
 			label = "SODIMM pin 45 wakeup";
 			gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_WAKEUP>;
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi
index 413e35215804..81c8a5fd92cc 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi
@@ -20,6 +20,15 @@
 		};
 	};
 
+	gpio: gpio@6000d000 {
+		lan-reset-n-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "LAN_RESET#";
+		};
+	};
+
 	pinmux@70000868 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&state_default>;
@@ -239,7 +248,7 @@
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
 			spdif-in-pk6 {
-				nvidia,pins =	"spdif_in_pk6";
+				nvidia,pins = "spdif_in_pk6";
 				nvidia,function = "hda";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -364,7 +373,7 @@
 			};
 			/* Multiplexed and therefore disabled */
 			cam-mclk-pcc0 {
-				nvidia,pins =	"cam_mclk_pcc0";
+				nvidia,pins = "cam_mclk_pcc0";
 				nvidia,function = "vi_alt3";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
@@ -511,7 +520,7 @@
 
 			/* Colibri USBC_DET */
 			spdif-out-pk5 {
-				nvidia,pins =	"spdif_out_pk5";
+				nvidia,pins = "spdif_out_pk5";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -701,10 +710,14 @@
 
 	serial@70006040 {
 		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
 	};
 
 	serial@70006300 {
 		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
 	};
 
 	hdmi_ddc: i2c@7000c700 {
@@ -765,9 +778,14 @@
 
 				vddctrl_reg: vddctrl {
 					regulator-name = "+V1.0_VDD_CPU";
-					regulator-min-microvolt = <1150000>;
-					regulator-max-microvolt = <1150000>;
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-coupled-with = <&vdd_core>;
+					regulator-coupled-max-spread = <300000>;
+					regulator-max-step-microvolt = <100000>;
 					regulator-always-on;
+
+					nvidia,tegra-cpu-regulator;
 				};
 
 				reg_1v8_vio: vio {
@@ -842,8 +860,7 @@
 		touchscreen@41 {
 			compatible = "st,stmpe811";
 			reg = <0x41>;
-			irq-gpio = <&gpio TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
-			interrupt-controller;
+			irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
 			id = <0>;
 			blocks = <0x5>;
 			irq-trigger = <0x1>;
@@ -857,6 +874,11 @@
 			st,sample-time = <4>;
 			/* forbid to use ADC channels 3-0 (touch) */
 
+			stmpe_adc {
+				compatible = "st,stmpe-adc";
+				st,norequest-mask = <0x0F>;
+			};
+
 			stmpe_touchscreen {
 				compatible = "st,stmpe-ts";
 				/* 8 sample average control */
@@ -873,11 +895,6 @@
 				/* 5 ms touch detect interrupt delay */
 				st,touch-det-delay = <5>;
 			};
-
-			stmpe_adc {
-				compatible = "st,stmpe-adc";
-				st,norequest-mask = <0x0F>;
-			};
 		};
 
 		/*
@@ -890,18 +907,20 @@
 		};
 
 		/* SW: +V1.2_VDD_CORE */
-		regulator@60 {
+		vdd_core: regulator@60 {
 			compatible = "ti,tps62362";
 			reg = <0x60>;
 
 			regulator-name = "tps62362-vout";
 			regulator-min-microvolt = <900000>;
 			regulator-max-microvolt = <1400000>;
+			regulator-coupled-with = <&vddctrl_reg>;
+			regulator-coupled-max-spread = <300000>;
+			regulator-max-step-microvolt = <100000>;
 			regulator-boot-on;
 			regulator-always-on;
-			ti,vsel0-state-low;
-			/* VSEL1: EN_CORE_DVFS_N low for DVFS */
-			ti,vsel1-state-low;
+
+			nvidia,tegra-core-regulator;
 		};
 	};
 
@@ -914,6 +933,7 @@
 		nvidia,core-pwr-off-time = <0>;
 		nvidia,core-power-req-active-high;
 		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
 
 		/* Set DEV_OFF bit in DCDC control register of TPS65911 PMIC */
 		i2c-thermtrip {
@@ -950,7 +970,8 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		asix@1 {
+		ethernet@1 {
+			compatible = "usbb95,772b";
 			reg = <1>;
 			local-mac-address = [00 00 00 00 00 00];
 		};
@@ -961,7 +982,7 @@
 		vbus-supply = <&reg_lan_v_bus>;
 	};
 
-	clk32k_in: xtal1 {
+	clk32k_in: clock-xtal1 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32768>;
@@ -1042,12 +1063,3 @@
 					 <&tegra_car TEGRA30_CLK_EXTERN1>;
 	};
 };
-
-&gpio {
-	lan-reset-n {
-		gpio-hog;
-		gpios = <TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "LAN_RESET#";
-	};
-};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-cpu-opp-microvolt.dtsi b/arch/arm/boot/dts/nvidia/tegra30-cpu-opp-microvolt.dtsi
new file mode 100644
index 000000000000..b8e0e9117021
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-cpu-opp-microvolt.dtsi
@@ -0,0 +1,289 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	cpu0_opp_table: opp-table-cpu0 {
+		opp-51000000-800 {
+			opp-microvolt = <800000 800000 1250000>;
+		};
+
+		opp-51000000-850 {
+			opp-microvolt = <850000 850000 1250000>;
+		};
+
+		opp-51000000-912 {
+			opp-microvolt = <912000 912000 1250000>;
+		};
+
+		opp-102000000-800 {
+			opp-microvolt = <800000 800000 1250000>;
+		};
+
+		opp-102000000-850 {
+			opp-microvolt = <850000 850000 1250000>;
+		};
+
+		opp-102000000-912 {
+			opp-microvolt = <912000 912000 1250000>;
+		};
+
+		opp-204000000-800 {
+			opp-microvolt = <800000 800000 1250000>;
+		};
+
+		opp-204000000-850 {
+			opp-microvolt = <850000 850000 1250000>;
+		};
+
+		opp-204000000-912 {
+			opp-microvolt = <912000 912000 1250000>;
+		};
+
+		opp-312000000-850 {
+			opp-microvolt = <850000 850000 1250000>;
+		};
+
+		opp-312000000-912 {
+			opp-microvolt = <912000 912000 1250000>;
+		};
+
+		opp-340000000-800 {
+			opp-microvolt = <800000 800000 1250000>;
+		};
+
+		opp-340000000-850 {
+			opp-microvolt = <850000 850000 1250000>;
+		};
+
+		opp-370000000-800 {
+			opp-microvolt = <800000 800000 1250000>;
+		};
+
+		opp-456000000-850 {
+			opp-microvolt = <850000 850000 1250000>;
+		};
+
+		opp-456000000-912 {
+			opp-microvolt = <912000 912000 1250000>;
+		};
+
+		opp-475000000-800 {
+			opp-microvolt = <800000 800000 1250000>;
+		};
+
+		opp-475000000-850 {
+			opp-microvolt = <850000 850000 1250000>;
+		};
+
+		opp-608000000-850 {
+			opp-microvolt = <850000 850000 1250000>;
+		};
+
+		opp-608000000-912 {
+			opp-microvolt = <912000 912000 1250000>;
+		};
+
+		opp-620000000-850 {
+			opp-microvolt = <850000 850000 1250000>;
+		};
+
+		opp-640000000-850 {
+			opp-microvolt = <850000 850000 1250000>;
+		};
+
+		opp-640000000-900 {
+			opp-microvolt = <900000 900000 1250000>;
+		};
+
+		opp-760000000-850 {
+			opp-microvolt = <850000 850000 1250000>;
+		};
+
+		opp-760000000-900 {
+			opp-microvolt = <900000 900000 1250000>;
+		};
+
+		opp-760000000-912 {
+			opp-microvolt = <912000 912000 1250000>;
+		};
+
+		opp-760000000-975 {
+			opp-microvolt = <975000 975000 1250000>;
+		};
+
+		opp-816000000-850 {
+			opp-microvolt = <850000 850000 1250000>;
+		};
+
+		opp-816000000-912 {
+			opp-microvolt = <912000 912000 1250000>;
+		};
+
+		opp-860000000-850 {
+			opp-microvolt = <850000 850000 1250000>;
+		};
+
+		opp-860000000-900 {
+			opp-microvolt = <900000 900000 1250000>;
+		};
+
+		opp-860000000-975 {
+			opp-microvolt = <975000 975000 1250000>;
+		};
+
+		opp-860000000-1000 {
+			opp-microvolt = <1000000 1000000 1250000>;
+		};
+
+		opp-910000000-900 {
+			opp-microvolt = <900000 900000 1250000>;
+		};
+
+		opp-1000000000-900 {
+			opp-microvolt = <900000 900000 1250000>;
+		};
+
+		opp-1000000000-975 {
+			opp-microvolt = <975000 975000 1250000>;
+		};
+
+		opp-1000000000-1000 {
+			opp-microvolt = <1000000 1000000 1250000>;
+		};
+
+		opp-1000000000-1025 {
+			opp-microvolt = <1025000 1025000 1250000>;
+		};
+
+		opp-1100000000-900 {
+			opp-microvolt = <900000 900000 1250000>;
+		};
+
+		opp-1100000000-975 {
+			opp-microvolt = <975000 975000 1250000>;
+		};
+
+		opp-1100000000-1000 {
+			opp-microvolt = <1000000 1000000 1250000>;
+		};
+
+		opp-1100000000-1025 {
+			opp-microvolt = <1025000 1025000 1250000>;
+		};
+
+		opp-1100000000-1075 {
+			opp-microvolt = <1075000 1075000 1250000>;
+		};
+
+		opp-1150000000-975 {
+			opp-microvolt = <975000 975000 1250000>;
+		};
+
+		opp-1200000000-975 {
+			opp-microvolt = <975000 975000 1250000>;
+		};
+
+		opp-1200000000-1000 {
+			opp-microvolt = <1000000 1000000 1250000>;
+		};
+
+		opp-1200000000-1025 {
+			opp-microvolt = <1025000 1025000 1250000>;
+		};
+
+		opp-1200000000-1050 {
+			opp-microvolt = <1050000 1050000 1250000>;
+		};
+
+		opp-1200000000-1075 {
+			opp-microvolt = <1075000 1075000 1250000>;
+		};
+
+		opp-1200000000-1100 {
+			opp-microvolt = <1100000 1100000 1250000>;
+		};
+
+		opp-1300000000-1000 {
+			opp-microvolt = <1000000 1000000 1250000>;
+		};
+
+		opp-1300000000-1025 {
+			opp-microvolt = <1025000 1025000 1250000>;
+		};
+
+		opp-1300000000-1050 {
+			opp-microvolt = <1050000 1050000 1250000>;
+		};
+
+		opp-1300000000-1075 {
+			opp-microvolt = <1075000 1075000 1250000>;
+		};
+
+		opp-1300000000-1100 {
+			opp-microvolt = <1100000 1100000 1250000>;
+		};
+
+		opp-1300000000-1125 {
+			opp-microvolt = <1125000 1125000 1250000>;
+		};
+
+		opp-1300000000-1150 {
+			opp-microvolt = <1150000 1150000 1250000>;
+		};
+
+		opp-1300000000-1175 {
+			opp-microvolt = <1175000 1175000 1250000>;
+		};
+
+		opp-1400000000-1100 {
+			opp-microvolt = <1100000 1100000 1250000>;
+		};
+
+		opp-1400000000-1125 {
+			opp-microvolt = <1125000 1125000 1250000>;
+		};
+
+		opp-1400000000-1150 {
+			opp-microvolt = <1150000 1150000 1250000>;
+		};
+
+		opp-1400000000-1175 {
+			opp-microvolt = <1175000 1175000 1250000>;
+		};
+
+		opp-1400000000-1237 {
+			opp-microvolt = <1237000 1237000 1250000>;
+		};
+
+		opp-1500000000-1125 {
+			opp-microvolt = <1125000 1125000 1250000>;
+		};
+
+		opp-1500000000-1150 {
+			opp-microvolt = <1150000 1150000 1250000>;
+		};
+
+		opp-1500000000-1200 {
+			opp-microvolt = <1200000 1200000 1250000>;
+		};
+
+		opp-1500000000-1237 {
+			opp-microvolt = <1237000 1237000 1250000>;
+		};
+
+		opp-1600000000-1212 {
+			opp-microvolt = <1212000 1212000 1250000>;
+		};
+
+		opp-1600000000-1237 {
+			opp-microvolt = <1237000 1237000 1250000>;
+		};
+
+		opp-1700000000-1212 {
+			opp-microvolt = <1212000 1212000 1250000>;
+		};
+
+		opp-1700000000-1237 {
+			opp-microvolt = <1237000 1237000 1250000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra30-cpu-opp.dtsi b/arch/arm/boot/dts/nvidia/tegra30-cpu-opp.dtsi
index 72f2fe26cc0e..5b9ebb75a09f 100644
--- a/arch/arm/boot/dts/tegra30-cpu-opp.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra30-cpu-opp.dtsi
@@ -1,116 +1,116 @@
 // SPDX-License-Identifier: GPL-2.0
 
 / {
-	cpu0_opp_table: cpu_opp_table0 {
+	cpu0_opp_table: opp-table-cpu0 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp@51000000,800 {
+		opp-51000000-800 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x31FE>;
 			opp-hz = /bits/ 64 <51000000>;
 		};
 
-		opp@51000000,850 {
+		opp-51000000-850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0C01>;
 			opp-hz = /bits/ 64 <51000000>;
 		};
 
-		opp@51000000,912 {
+		opp-51000000-912 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0200>;
 			opp-hz = /bits/ 64 <51000000>;
 		};
 
-		opp@102000000,800 {
+		opp-102000000-800 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x31FE>;
 			opp-hz = /bits/ 64 <102000000>;
 		};
 
-		opp@102000000,850 {
+		opp-102000000-850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0C01>;
 			opp-hz = /bits/ 64 <102000000>;
 		};
 
-		opp@102000000,912 {
+		opp-102000000-912 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0200>;
 			opp-hz = /bits/ 64 <102000000>;
 		};
 
-		opp@204000000,800 {
+		opp-204000000-800 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x31FE>;
 			opp-hz = /bits/ 64 <204000000>;
 			opp-suspend;
 		};
 
-		opp@204000000,850 {
+		opp-204000000-850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0C01>;
 			opp-hz = /bits/ 64 <204000000>;
 			opp-suspend;
 		};
 
-		opp@204000000,912 {
+		opp-204000000-912 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0200>;
 			opp-hz = /bits/ 64 <204000000>;
 			opp-suspend;
 		};
 
-		opp@312000000,850 {
+		opp-312000000-850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0C00>;
 			opp-hz = /bits/ 64 <312000000>;
 		};
 
-		opp@312000000,912 {
+		opp-312000000-912 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0200>;
 			opp-hz = /bits/ 64 <312000000>;
 		};
 
-		opp@340000000,800 {
+		opp-340000000-800 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0192>;
 			opp-hz = /bits/ 64 <340000000>;
 		};
 
-		opp@340000000,850 {
+		opp-340000000-850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x0F 0x0001>;
 			opp-hz = /bits/ 64 <340000000>;
 		};
 
-		opp@370000000,800 {
+		opp-370000000-800 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1E 0x306C>;
 			opp-hz = /bits/ 64 <370000000>;
 		};
 
-		opp@456000000,850 {
+		opp-456000000-850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0C00>;
 			opp-hz = /bits/ 64 <456000000>;
 		};
 
-		opp@456000000,912 {
+		opp-456000000-912 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0200>;
 			opp-hz = /bits/ 64 <456000000>;
 		};
 
-		opp@475000000,800 {
+		opp-475000000-800 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1E 0x31FE>;
 			opp-hz = /bits/ 64 <475000000>;
 		};
 
-		opp@475000000,850 {
+		opp-475000000-850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x0F 0x0001>, <0x01 0x0002>,
 					   <0x01 0x0010>, <0x01 0x0080>,
@@ -118,25 +118,25 @@
 			opp-hz = /bits/ 64 <475000000>;
 		};
 
-		opp@608000000,850 {
+		opp-608000000-850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0400>;
 			opp-hz = /bits/ 64 <608000000>;
 		};
 
-		opp@608000000,912 {
+		opp-608000000-912 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0200>;
 			opp-hz = /bits/ 64 <608000000>;
 		};
 
-		opp@620000000,850 {
+		opp-620000000-850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1E 0x306C>;
 			opp-hz = /bits/ 64 <620000000>;
 		};
 
-		opp@640000000,850 {
+		opp-640000000-850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x0F 0x0001>, <0x02 0x0002>,
 					   <0x04 0x0002>, <0x08 0x0002>,
@@ -149,13 +149,13 @@
 			opp-hz = /bits/ 64 <640000000>;
 		};
 
-		opp@640000000,900 {
+		opp-640000000-900 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0192>;
 			opp-hz = /bits/ 64 <640000000>;
 		};
 
-		opp@760000000,850 {
+		opp-760000000-850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1E 0x3461>, <0x08 0x0002>,
 					   <0x08 0x0004>, <0x08 0x0008>,
@@ -165,7 +165,7 @@
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000,900 {
+		opp-760000000-900 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0001>, <0x02 0x0002>,
 					   <0x04 0x0002>, <0x02 0x0004>,
@@ -177,37 +177,37 @@
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000,912 {
+		opp-760000000-912 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0200>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000,975 {
+		opp-760000000-975 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0192>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@816000000,850 {
+		opp-816000000-850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0400>;
 			opp-hz = /bits/ 64 <816000000>;
 		};
 
-		opp@816000000,912 {
+		opp-816000000-912 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0200>;
 			opp-hz = /bits/ 64 <816000000>;
 		};
 
-		opp@860000000,850 {
+		opp-860000000-850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x0C 0x0001>;
 			opp-hz = /bits/ 64 <860000000>;
 		};
 
-		opp@860000000,900 {
+		opp-860000000-900 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x0001>, <0x04 0x0002>,
 					   <0x08 0x0002>, <0x04 0x0004>,
@@ -220,7 +220,7 @@
 			opp-hz = /bits/ 64 <860000000>;
 		};
 
-		opp@860000000,975 {
+		opp-860000000-975 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0001>, <0x02 0x0002>,
 					   <0x02 0x0004>, <0x02 0x0008>,
@@ -229,25 +229,25 @@
 			opp-hz = /bits/ 64 <860000000>;
 		};
 
-		opp@860000000,1000 {
+		opp-860000000-1000 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0192>;
 			opp-hz = /bits/ 64 <860000000>;
 		};
 
-		opp@910000000,900 {
+		opp-910000000-900 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x18 0x3060>;
 			opp-hz = /bits/ 64 <910000000>;
 		};
 
-		opp@1000000000,900 {
+		opp-1000000000-900 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x0C 0x0001>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000,975 {
+		opp-1000000000-975 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x03 0x0001>, <0x04 0x0002>,
 					   <0x08 0x0002>, <0x04 0x0004>,
@@ -260,25 +260,25 @@
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000,1000 {
+		opp-1000000000-1000 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x019E>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000,1025 {
+		opp-1000000000-1025 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0192>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1100000000,900 {
+		opp-1100000000-900 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0001>;
 			opp-hz = /bits/ 64 <1100000000>;
 		};
 
-		opp@1100000000,975 {
+		opp-1100000000-975 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x06 0x0001>, <0x08 0x0002>,
 					   <0x08 0x0004>, <0x08 0x0008>,
@@ -288,7 +288,7 @@
 			opp-hz = /bits/ 64 <1100000000>;
 		};
 
-		opp@1100000000,1000 {
+		opp-1100000000-1000 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0001>, <0x04 0x0002>,
 					   <0x04 0x0004>, <0x04 0x0008>,
@@ -297,31 +297,31 @@
 			opp-hz = /bits/ 64 <1100000000>;
 		};
 
-		opp@1100000000,1025 {
+		opp-1100000000-1025 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x019E>;
 			opp-hz = /bits/ 64 <1100000000>;
 		};
 
-		opp@1100000000,1075 {
+		opp-1100000000-1075 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0192>;
 			opp-hz = /bits/ 64 <1100000000>;
 		};
 
-		opp@1150000000,975 {
+		opp-1150000000-975 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x18 0x3060>;
 			opp-hz = /bits/ 64 <1150000000>;
 		};
 
-		opp@1200000000,975 {
+		opp-1200000000-975 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0001>;
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1200000000,1000 {
+		opp-1200000000-1000 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0001>, <0x08 0x0002>,
 					   <0x08 0x0004>, <0x08 0x0008>,
@@ -331,7 +331,7 @@
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1200000000,1025 {
+		opp-1200000000-1025 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x0001>, <0x04 0x0002>,
 					   <0x04 0x0004>, <0x04 0x0008>,
@@ -340,39 +340,39 @@
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1200000000,1050 {
+		opp-1200000000-1050 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x019E>;
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1200000000,1075 {
+		opp-1200000000-1075 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0001>;
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1200000000,1100 {
+		opp-1200000000-1100 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0192>;
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1300000000,1000 {
+		opp-1300000000-1000 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0001>, <0x10 0x0080>,
 					   <0x10 0x0100>;
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1300000000,1025 {
+		opp-1300000000-1025 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0001>, <0x08 0x0002>,
 					   <0x08 0x0080>, <0x08 0x0100>;
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1300000000,1050 {
+		opp-1300000000-1050 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x12 0x3061>, <0x04 0x0002>,
 					   <0x08 0x0004>, <0x08 0x0008>,
@@ -383,68 +383,68 @@
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1300000000,1075 {
+		opp-1300000000-1075 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x0182>, <0x04 0x0004>,
 					   <0x04 0x0008>, <0x04 0x0010>;
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1300000000,1100 {
+		opp-1300000000-1100 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x001C>;
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1300000000,1125 {
+		opp-1300000000-1125 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0001>;
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1300000000,1150 {
+		opp-1300000000-1150 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0182>;
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1300000000,1175 {
+		opp-1300000000-1175 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0010>;
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1400000000,1100 {
+		opp-1400000000-1100 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x18 0x307C>;
 			opp-hz = /bits/ 64 <1400000000>;
 		};
 
-		opp@1400000000,1125 {
+		opp-1400000000-1125 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x000C>;
 			opp-hz = /bits/ 64 <1400000000>;
 		};
 
-		opp@1400000000,1150 {
+		opp-1400000000-1150 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x000C>, <0x04 0x0010>;
 			opp-hz = /bits/ 64 <1400000000>;
 		};
 
-		opp@1400000000,1175 {
+		opp-1400000000-1175 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x0010>;
 			opp-hz = /bits/ 64 <1400000000>;
 		};
 
-		opp@1400000000,1237 {
+		opp-1400000000-1237 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0010>;
 			opp-hz = /bits/ 64 <1400000000>;
 		};
 
-		opp@1500000000,1125 {
+		opp-1500000000-1125 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0010>, <0x10 0x0020>,
 					   <0x10 0x0040>, <0x10 0x1000>,
@@ -452,7 +452,7 @@
 			opp-hz = /bits/ 64 <1500000000>;
 		};
 
-		opp@1500000000,1150 {
+		opp-1500000000-1150 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0010>, <0x08 0x0020>,
 					   <0x08 0x0040>, <0x08 0x1000>,
@@ -460,37 +460,37 @@
 			opp-hz = /bits/ 64 <1500000000>;
 		};
 
-		opp@1500000000,1200 {
+		opp-1500000000-1200 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x0010>;
 			opp-hz = /bits/ 64 <1500000000>;
 		};
 
-		opp@1500000000,1237 {
+		opp-1500000000-1237 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0010>;
 			opp-hz = /bits/ 64 <1500000000>;
 		};
 
-		opp@1600000000,1212 {
+		opp-1600000000-1212 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x10 0x3060>;
 			opp-hz = /bits/ 64 <1600000000>;
 		};
 
-		opp@1600000000,1237 {
+		opp-1600000000-1237 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x3060>;
 			opp-hz = /bits/ 64 <1600000000>;
 		};
 
-		opp@1700000000,1212 {
+		opp-1700000000-1212 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x10 0x3060>;
 			opp-hz = /bits/ 64 <1700000000>;
 		};
 
-		opp@1700000000,1237 {
+		opp-1700000000-1237 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x3060>;
 			opp-hz = /bits/ 64 <1700000000>;
diff --git a/arch/arm/boot/dts/nvidia/tegra30-lg-p880.dts b/arch/arm/boot/dts/nvidia/tegra30-lg-p880.dts
new file mode 100644
index 000000000000..c6ef0a20c19f
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-lg-p880.dts
@@ -0,0 +1,489 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-lg-x3.dtsi"
+
+/ {
+	model = "LG Optimus 4X HD P880";
+	compatible = "lg,p880", "nvidia,tegra30";
+
+	aliases {
+		mmc1 = &sdmmc3; /* uSD slot */
+		mmc2 = &sdmmc1; /* WiFi */
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* WLAN SDIO pinmux */
+			host-wlan-wake {
+				nvidia,pins = "pu4";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* GNSS UART-B pinmux */
+			uartb-rxd {
+				nvidia,pins = "uart2_rxd_pc3";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uartb-txd {
+				nvidia,pins = "uart2_txd_pc2";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gps-reset {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* MicroSD pinmux */
+			sdmmc3-clk {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3-data {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+						"sdmmc3_dat0_pb7",
+						"sdmmc3_dat1_pb6",
+						"sdmmc3_dat2_pb5",
+						"sdmmc3_dat3_pb4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			microsd-detect {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* GPIO keys pinmux */
+			volume-up {
+				nvidia,pins = "ulpi_data6_po7";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Sensors pinmux */
+			current-alert-irq {
+				nvidia,pins = "uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* AUDIO pinmux */
+			sub-mic-ldo {
+				nvidia,pins = "gmi_cs7_n_pi6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+
+	i2c@7000c400 {
+		touchscreen@20 {
+			rmi4-f11@11 {
+				syna,clip-x-high = <1440>;
+				syna,clip-y-high = <2560>;
+
+				touchscreen-inverted-y;
+			};
+		};
+	};
+
+	memory-controller@7000f000 {
+		emc-timings-0 {
+			/* SAMSUNG 1GB K4P8G304EB FGC1 533MHz */
+			nvidia,ram-code = <0>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emem-configuration = < 0x00050001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x77230303 0x001f0000 >;
+			};
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x73e30303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x72c30303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000018
+					0x00000001 0x00000001 0x00000003 0x00000001
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060403 0x72430504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000006 0x00000003
+					0x00000005 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000003 0x00000002
+					0x02030001 0x00070506 0x71e40a07 0x001f0000 >;
+			};
+
+			timing-266500000 {
+				clock-frequency = <266500000>;
+
+				nvidia,emem-configuration = < 0x00000004 0xC0000030
+					0x00000001 0x00000002 0x00000008 0x00000004
+					0x00000006 0x00000001 0x00000002 0x00000005
+					0x00000001 0x00000000 0x00000003 0x00000003
+					0x03030001 0x00090608 0x70040c09 0x001f0000 >;
+			};
+
+			timing-533000000 {
+				clock-frequency = <533000000>;
+
+				nvidia,emem-configuration = < 0x00000008 0xC0000060
+					0x00000003 0x00000004 0x00000010 0x0000000a
+					0x0000000d 0x00000002 0x00000002 0x00000008
+					0x00000002 0x00000000 0x00000004 0x00000005
+					0x05040002 0x00110b10 0x70281811 0x001f0000 >;
+			};
+		};
+	};
+
+	memory-controller@7000f400 {
+		emc-timings-0 {
+			/* SAMSUNG 1GB K4P8G304EB FGC1 533MHz */
+			nvidia,ram-code = <0>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000000
+					0x00000001 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x0000002f 0x00000000 0x0000000b
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000002 0x00000002
+					0x00000003 0x00000008 0x00000004 0x00000001
+					0x00000002 0x00000036 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000009 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000164 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000003 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x00000060 0x00000000 0x00000018
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000004 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000001
+					0x00000002 0x0000006b 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000000a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x800001c5 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000003
+					0x00000006 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x000000c0 0x00000000 0x00000030
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000008 0x00000008
+					0x00000003 0x00000008 0x00000004 0x00000001
+					0x00000002 0x000000d5 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000013 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x0000000a>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000006
+					0x0000000d 0x00000004 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x00000181 0x00000000 0x00000060
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x0000000f 0x0000000f
+					0x00000003 0x00000008 0x00000004 0x00000001
+					0x00000002 0x000001a9 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000025 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010042>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000013>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000c
+					0x0000001a 0x00000008 0x00000003 0x00000005
+					0x00000004 0x00000001 0x00000006 0x00000003
+					0x00000003 0x00000002 0x00000002 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000c
+					0x0000000a 0x00000303 0x00000000 0x000000c0
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000007 0x0000001d 0x0000001d
+					0x00000004 0x0000000b 0x00000005 0x00000001
+					0x00000002 0x00000351 0x00000004 0x00000006
+					0x00000000 0x00000000 0x00004282 0x004400a4
+					0x00008000 0x00070000 0x00070000 0x00070000
+					0x00070000 0x00070000 0x00070000 0x00070000
+					0x00070000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000e0220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000004a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-266500000 {
+				clock-frequency = <266500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010042>;
+				nvidia,emc-mode-2 = <0x00020002>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000018>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000f
+					0x00000022 0x0000000b 0x00000004 0x00000005
+					0x00000005 0x00000001 0x00000007 0x00000004
+					0x00000004 0x00000002 0x00000002 0x00000000
+					0x00000002 0x00000005 0x00000002 0x0000000c
+					0x0000000b 0x000003ef 0x00000000 0x000000fb
+					0x00000001 0x00000001 0x00000004 0x00000000
+					0x00000001 0x00000009 0x00000026 0x00000026
+					0x00000004 0x0000000e 0x00000006 0x00000001
+					0x00000002 0x00000455 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00006282 0x003200a4
+					0x00008000 0x00050000 0x00050000 0x00050000
+					0x00050000 0x00050000 0x00050000 0x00050000
+					0x00050000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00060000 0x00060000 0x00060000
+					0x00060000 0x000b0220 0x0800003d 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000060 0x000a000a 0xa0f10000 0x00000000
+					0x00000000 0x800008ee 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-533000000 {
+				clock-frequency = <533000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x000100c2>;
+				nvidia,emc-mode-2 = <0x00020006>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000030>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000001f
+					0x00000045 0x00000016 0x00000009 0x00000008
+					0x00000009 0x00000003 0x0000000d 0x00000009
+					0x00000009 0x00000005 0x00000003 0x00000000
+					0x00000004 0x00000009 0x00000006 0x0000000d
+					0x00000010 0x000007df 0x00000000 0x000001f7
+					0x00000003 0x00000003 0x00000009 0x00000000
+					0x00000001 0x0000000f 0x0000004b 0x0000004b
+					0x00000008 0x0000001b 0x0000000c 0x00000001
+					0x00000002 0x000008aa 0x00000000 0x00000006
+					0x00000000 0x00000000 0x00006282 0xf0120091
+					0x00008000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00090220 0x0800003d 0x00000000
+					0x77ffc004 0x01f1f408 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x000000c0 0x000e000e 0xa0f10000 0x00000000
+					0x00000000 0x800010d9 0xe0000000 0xff00ff88 >;
+			};
+		};
+	};
+
+	sdmmc3: mmc@78000400 {
+		status = "okay";
+
+		cd-gpios = <&gpio TEGRA_GPIO(W, 5) GPIO_ACTIVE_LOW>;
+		bus-width = <4>;
+
+		vmmc-supply = <&vdd_usd>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+	};
+
+	battery: battery-cell {
+		compatible = "simple-battery";
+		device-chemistry = "lithium-ion";
+		charge-full-design-microamp-hours = <2150000>;
+		energy-full-design-microwatt-hours = <8200000>;
+		operating-range-celsius = <0 45>;
+	};
+
+	gpio-keys {
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(O, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	sound {
+		compatible = "lg,tegra-audio-max98089-p880",
+			     "nvidia,tegra-audio-max98089";
+		nvidia,model = "LG Optimus 4X HD MAX98089";
+
+		nvidia,int-mic-en-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-lg-p895.dts b/arch/arm/boot/dts/nvidia/tegra30-lg-p895.dts
new file mode 100644
index 000000000000..e32fafc7f5e0
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-lg-p895.dts
@@ -0,0 +1,496 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-lg-x3.dtsi"
+
+/ {
+	model = "LG Optimus Vu P895";
+	compatible = "lg,p895", "nvidia,tegra30";
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* GNSS UART-B pinmux */
+			uartb-cts-rxd {
+				nvidia,pins = "uart2_cts_n_pj5",
+						"uart2_rxd_pc3";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uartb-rts-txd {
+				nvidia,pins = "uart2_rts_n_pj6",
+						"uart2_txd_pc2";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gps-reset {
+				nvidia,pins = "spdif_out_pk5";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* GPIO keys pinmux */
+			memo-key {
+				nvidia,pins = "sdmmc3_dat1_pb6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			volume-up {
+				nvidia,pins = "gmi_cs7_n_pi6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Sensors pinmux */
+			current-alert-irq {
+				nvidia,pins = "spi1_cs0_n_px6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Panel pinmux */
+			panel-vdd {
+				nvidia,pins = "pbb0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* AUDIO pinmux */
+			sub-mic-ldo {
+				nvidia,pins = "gmi_dqs_pi2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Modem pinmux */
+			usim-detect {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* GPIO power/drive control */
+			drive-sdmmc4 {
+				nvidia,pins = "drive_gma",
+						"drive_gmb",
+						"drive_gmc",
+						"drive_gmd";
+				nvidia,pull-down-strength = <9>;
+				nvidia,pull-up-strength = <9>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+		};
+	};
+
+	i2c@7000c400 {
+		touchscreen@20 {
+			rmi4-f11@11 {
+				syna,clip-x-high = <1535>;
+				syna,clip-y-high = <2047>;
+			};
+		};
+	};
+
+	memory-controller@7000f000 {
+		emc-timings-2 {
+			/* Hynix 1GB H9TCNNN8JDMMPR LPDDR2 533MHz */
+			nvidia,ram-code = <2>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x77230303 0x001f0000 >;
+			};
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00030003 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x73e30303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010003 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x72c30303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000018
+					0x00000001 0x00000001 0x00000003 0x00000001
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060403 0x72430504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000006 0xc0000025
+					0x00000001 0x00000001 0x00000006 0x00000003
+					0x00000005 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000003 0x00000002
+					0x02030001 0x00070506 0x71e40a07 0x001f0000 >;
+			};
+
+			timing-266500000 {
+				clock-frequency = <266500000>;
+
+				nvidia,emem-configuration = < 0x00000008 0xc0000030
+					0x00000001 0x00000002 0x00000008 0x00000004
+					0x00000006 0x00000001 0x00000002 0x00000005
+					0x00000001 0x00000000 0x00000003 0x00000003
+					0x03030001 0x00090608 0x70040c09 0x001f0000 >;
+			};
+
+			timing-533000000 {
+				clock-frequency = <533000000>;
+
+				nvidia,emem-configuration = < 0x0000000f 0xc0000060
+					0x00000003 0x00000004 0x00000010 0x0000000a
+					0x0000000d 0x00000002 0x00000002 0x00000008
+					0x00000002 0x00000000 0x00000004 0x00000005
+					0x05040002 0x00110b10 0x70281811 0x001f0000 >;
+			};
+		};
+	};
+
+	memory-controller@7000f400 {
+		emc-timings-2 {
+			/* Hynix 1GB H9TCNNN8JDMMPR LPDDR2 533MHz */
+			nvidia,ram-code = <2>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000000
+					0x00000001 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x0000002f 0x00000000 0x0000000b
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000002 0x00000002
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x00000036 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000009 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000164 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000003 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x00000060 0x00000000 0x00000018
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000004 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x0000006b 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000000a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x800001c5 0xd0000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000003
+					0x00000006 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x000000c0 0x00000000 0x00000030
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000008 0x00000008
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000000d5 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000013 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xd0000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x0000000a>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000006
+					0x0000000d 0x00000004 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x00000181 0x00000000 0x00000060
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x0000000f 0x0000000f
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000001a9 0x00000004 0x00000006
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000025 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xd0000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010042>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000013>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000c
+					0x0000001a 0x00000008 0x00000003 0x00000005
+					0x00000004 0x00000001 0x00000006 0x00000003
+					0x00000003 0x00000002 0x00000002 0x00000000
+					0x00000001 0x00000004 0x00000001 0x0000000c
+					0x0000000a 0x00000303 0x00000000 0x000000c0
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000007 0x0000001d 0x0000001d
+					0x00000004 0x0000000b 0x00000005 0x00000004
+					0x00000002 0x00000351 0x00000005 0x00000004
+					0x00000000 0x00000000 0x00004282 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00072000 0x00072000 0x00072000
+					0x00072000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000e0220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000004a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-266500000 {
+				clock-frequency = <266500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010042>;
+				nvidia,emc-mode-2 = <0x00020002>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000018>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000f
+					0x00000022 0x0000000b 0x00000004 0x00000005
+					0x00000005 0x00000001 0x00000007 0x00000004
+					0x00000004 0x00000002 0x00000002 0x00000000
+					0x00000002 0x00000005 0x00000002 0x0000000c
+					0x0000000b 0x000003ef 0x00000000 0x000000fb
+					0x00000001 0x00000001 0x00000004 0x00000000
+					0x00000001 0x00000009 0x00000026 0x00000026
+					0x00000004 0x0000000e 0x00000006 0x00000004
+					0x00000002 0x00000455 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00006282 0x003200a4
+					0x00008000 0x00070000 0x00070000 0x00070000
+					0x00070000 0x00072000 0x00072000 0x00072000
+					0x00072000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080002 0x00080002 0x00080002
+					0x00080002 0x000e0220 0x0800003d 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000060 0x000a000a 0xa0f10000 0x00000000
+					0x00000000 0x800008ee 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-533000000 {
+				clock-frequency = <533000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x000100c2>;
+				nvidia,emc-mode-2 = <0x00020006>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000030>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000001f
+					0x00000045 0x00000016 0x00000009 0x00000008
+					0x00000009 0x00000003 0x0000000d 0x00000009
+					0x00000009 0x00000005 0x00000003 0x00000000
+					0x00000004 0x0000000a 0x00000006 0x0000000d
+					0x00000010 0x000007df 0x00000000 0x000001f7
+					0x00000003 0x00000003 0x00000009 0x00000000
+					0x00000001 0x0000000f 0x0000004b 0x0000004b
+					0x00000008 0x0000001b 0x0000000c 0x00000004
+					0x00000002 0x000008aa 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00006282 0xf0120091
+					0x00008000 0x0000000c 0x0000000c 0x0000000c
+					0x0000000c 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000c 0x0000000c 0x0000000c
+					0x0000000c 0x000c0220 0x0800003d 0x00000000
+					0x77ffc004 0x01f1f408 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x000000c0 0x000e000e 0xa0f10000 0x00000000
+					0x00000000 0x800010d9 0xe0000000 0xff00ff88 >;
+			};
+		};
+	};
+
+	battery: battery-cell {
+		compatible = "simple-battery";
+		device-chemistry = "lithium-ion";
+		charge-full-design-microamp-hours = <2080000>;
+		energy-full-design-microwatt-hours = <7700000>;
+		operating-range-celsius = <0 45>;
+	};
+
+	gpio-keys {
+		key-memo {
+			label = "Memo";
+			gpios = <&gpio TEGRA_GPIO(B, 6) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MEMO>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		led-power {
+			label = "power::white";
+			gpios = <&gpio TEGRA_GPIO(R, 3) GPIO_ACTIVE_HIGH>;
+
+			linux,default-trigger = "battery-charging";
+
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_CHARGING;
+		};
+	};
+
+	regulator-lcd3v {
+		gpio = <&gpio TEGRA_GPIO(BB, 0) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "lg,tegra-audio-max98089-p895",
+			     "nvidia,tegra-audio-max98089";
+		nvidia,model = "LG Optimus Vu MAX98089";
+
+		nvidia,int-mic-en-gpios = <&gpio TEGRA_GPIO(I, 2) GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-lg-x3.dtsi b/arch/arm/boot/dts/nvidia/tegra30-lg-x3.dtsi
new file mode 100644
index 000000000000..909260a5d0fb
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-lg-x3.dtsi
@@ -0,0 +1,1812 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/mfd/max77620.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "tegra30.dtsi"
+#include "tegra30-cpu-opp.dtsi"
+#include "tegra30-cpu-opp-microvolt.dtsi"
+
+/ {
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdmmc4; /* eMMC */
+		mmc1 = &sdmmc1; /* WiFi */
+
+		rtc0 = &pmic;
+		rtc1 = "/rtc@7000e000";
+
+		serial0 = &uartd; /* Console */
+		serial1 = &uartc; /* Bluetooth */
+		serial2 = &uartb; /* GPS */
+	};
+
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen { };
+
+	firmware {
+		trusted-foundations {
+			compatible = "tlm,trusted-foundations";
+			tlm,version-major = <2>;
+			tlm,version-minor = <8>;
+		};
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		linux,cma@80000000 {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0x80000000 0x30000000>;
+			size = <0x10000000>;		/* 256MiB */
+			linux,cma-default;
+			reusable;
+		};
+
+		ramoops@bed00000 {
+			compatible = "ramoops";
+			reg = <0xbed00000 0x10000>;	/* 64kB */
+			console-size = <0x8000>;	/* 32kB */
+			record-size = <0x400>;		/* 1kB */
+			ecc-size = <16>;
+		};
+
+		trustzone@bfe00000 {
+			reg = <0xbfe00000 0x200000>;	/* 2MB */
+			no-map;
+		};
+	};
+
+	vde@6001a000 {
+		assigned-clocks = <&tegra_car TEGRA30_CLK_VDE>;
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_P>;
+		assigned-clock-rates = <408000000>;
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* WLAN SDIO pinmux */
+			sdmmc1-clk {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1-cmd {
+				nvidia,pins = "sdmmc1_cmd_pz1",
+						"sdmmc1_dat3_py4",
+						"sdmmc1_dat2_py5",
+						"sdmmc1_dat1_py6",
+						"sdmmc1_dat0_py7";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			wlan-reset {
+				nvidia,pins = "pv3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			wlan-host-wake {
+				nvidia,pins = "pu6";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* GNSS UART-B pinmux */
+			gps-pwr-en {
+				nvidia,pins = "kb_row6_pr6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gps-ldo-en {
+				nvidia,pins = "ulpi_dir_py1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gps-clk-ref {
+				nvidia,pins = "gmi_ad8_ph0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Bluetooth UART-C pinmux */
+			uartc-cts-rxd {
+				nvidia,pins = "uart3_cts_n_pa1",
+						"uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uartc-rts-txd {
+				nvidia,pins = "uart3_rts_n_pc0",
+						"uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			bt-reset {
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "dap";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			bt-dev-wake {
+				nvidia,pins = "kb_row11_ps3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			bt-host-wake {
+				nvidia,pins = "kb_row12_ps4";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			bt-pcm-dap4 {
+				nvidia,pins = "dap4_fs_pp4",
+						"dap4_din_pp5",
+						"dap4_dout_pp6",
+						"dap4_sclk_pp7";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* EMMC pinmux */
+			sdmmc4-clk {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-data {
+				nvidia,pins = "sdmmc4_cmd_pt7",
+						"sdmmc4_dat0_paa0",
+						"sdmmc4_dat1_paa1",
+						"sdmmc4_dat2_paa2",
+						"sdmmc4_dat3_paa3",
+						"sdmmc4_dat4_paa4",
+						"sdmmc4_dat5_paa5",
+						"sdmmc4_dat6_paa6",
+						"sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-reset {
+				nvidia,pins = "sdmmc4_rst_n_pcc3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* I2C pinmux */
+			gen1-i2c {
+				nvidia,pins = "gen1_i2c_scl_pc4",
+						"gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			gen2-i2c {
+				nvidia,pins = "gen2_i2c_scl_pt5",
+						"gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			cam-i2c {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+						"cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			ddc-i2c {
+				nvidia,pins = "ddc_scl_pv4",
+						"ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			pwr-i2c {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+						"pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			mhl-i2c {
+				nvidia,pins = "kb_col6_pq6",
+						"kb_col7_pq7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* GPIO keys pinmux */
+			power-key {
+				nvidia,pins = "gmi_wp_n_pc7";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			volume-down {
+				nvidia,pins = "ulpi_data3_po4";
+				nvidia,function = "spi3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Sensors pinmux */
+			sen-vdd {
+				nvidia,pins = "spi1_miso_px7";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			proxi-vdd {
+				nvidia,pins = "spi2_miso_px1";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sen-vio {
+				nvidia,pins = "lcd_dc1_pd2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			nct-irq {
+				nvidia,pins = "gmi_iordy_pi5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			bat-irq {
+				nvidia,pins = "kb_row8_ps0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			charger-irq {
+				nvidia,pins = "gmi_cs1_n_pj2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			mpu-irq {
+				nvidia,pins = "gmi_ad12_ph4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			compass-irq {
+				nvidia,pins = "gmi_ad13_ph5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			light-irq {
+				nvidia,pins = "gmi_cs4_n_pk2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* LED pinmux */
+			backlight-en {
+				nvidia,pins = "lcd_dc0_pn6";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			flash-led-en {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			keypad-led {
+				nvidia,pins = "kb_row2_pr2",
+						"kb_row3_pr3";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* NFC pinmux */
+			nfc-irq {
+				nvidia,pins = "spi2_cs1_n_pw2";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			nfc-ven {
+				nvidia,pins = "spi1_sck_px5";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			nfc-firm {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* DC pinmux */
+			lcd-pwr {
+				nvidia,pins = "lcd_pwr0_pb2",
+						"lcd_pwr1_pc1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			lcd-wr-n {
+				nvidia,pins = "lcd_wr_n_pz3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd-id {
+				nvidia,pins = "lcd_m1_pw1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			lcd-pclk {
+				nvidia,pins = "lcd_pclk_pb3",
+						"lcd_de_pj1",
+						"lcd_hsync_pj3",
+						"lcd_vsync_pj4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd-rgb-blue {
+				nvidia,pins = "lcd_d0_pe0",
+						"lcd_d1_pe1",
+						"lcd_d2_pe2",
+						"lcd_d3_pe3",
+						"lcd_d4_pe4",
+						"lcd_d5_pe5",
+						"lcd_d18_pm2",
+						"lcd_d19_pm3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd-rgb-green {
+				nvidia,pins = "lcd_d6_pe6",
+						"lcd_d7_pe7",
+						"lcd_d8_pf0",
+						"lcd_d9_pf1",
+						"lcd_d10_pf2",
+						"lcd_d11_pf3",
+						"lcd_d20_pm4",
+						"lcd_d21_pm5";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd-rgb-red {
+				nvidia,pins = "lcd_d12_pf4",
+						"lcd_d13_pf5",
+						"lcd_d14_pf6",
+						"lcd_d15_pf7",
+						"lcd_d16_pm0",
+						"lcd_d17_pm1",
+						"lcd_d22_pm6",
+						"lcd_d23_pm7";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Bridge pinmux */
+			bridge-reset {
+				nvidia,pins = "ulpi_data1_po2";
+				nvidia,function = "spi3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			rgb-ic-en {
+				nvidia,pins = "gmi_a18_pb1";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			bridge-clk {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			rgb-bridge {
+				nvidia,pins = "lcd_sdin_pz2",
+						"lcd_sdout_pn5",
+						"lcd_cs0_n_pn4",
+						"lcd_sck_pz4";
+				nvidia,function = "spi5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Panel pinmux */
+			panel-reset {
+				nvidia,pins = "lcd_cs1_n_pw0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			panel-vio {
+				nvidia,pins = "ulpi_clk_py0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Touchscreen pinmux */
+			touch-vdd {
+				nvidia,pins = "kb_col1_pq1";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			touch-vio {
+				nvidia,pins = "spi1_mosi_px4";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			touch-irq-n {
+				nvidia,pins = "kb_col3_pq3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			touch-rst-n {
+				nvidia,pins = "ulpi_data0_po1";
+				nvidia,function = "spi3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			touch-maker-id {
+				nvidia,pins = "kb_col2_pq2";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* MHL pinmux */
+			mhl-vio {
+				nvidia,pins = "pv2";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			mhl-rst-n {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "dev3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			mhl-irq {
+				nvidia,pins = "crt_vsync_pv7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			mhl-sel {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi-hpd {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "hdmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* AUDIO pinmux */
+			hp-detect {
+				nvidia,pins = "pbb6";
+				nvidia,function = "vgp6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			hp-hook {
+				nvidia,pins = "ulpi_data4_po5";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ear-mic-en {
+				nvidia,pins = "spi2_mosi_px0";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			audio-irq {
+				nvidia,pins = "spi2_cs2_n_pw3";
+				nvidia,function = "spi3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			audio-mclk {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap-i2s0 {
+				nvidia,pins = "dap1_fs_pn0",
+						"dap1_din_pn1",
+						"dap1_dout_pn2",
+						"dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap-i2s1 {
+				nvidia,pins = "dap2_fs_pa2",
+						"dap2_sclk_pa3",
+						"dap2_din_pa4",
+						"dap2_dout_pa5";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* MUIC pinmux */
+			muic-irq {
+				nvidia,pins = "gmi_cs0_n_pj0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			muic-dp2t {
+				nvidia,pins = "pcc2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			muic-usif {
+				nvidia,pins = "ulpi_stp_py3";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ifx-usb-vbus-en {
+				nvidia,pins = "kb_row4_pr4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcb-rev {
+				nvidia,pins = "gmi_wait_pi7",
+						"gmi_rst_n_pi4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			jtag-rtck {
+				nvidia,pins = "jtag_rtck_pu7";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Camera pinmux */
+			cam-mclk {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			cam-pmic-en {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			front-cam-rst {
+				nvidia,pins = "pbb5";
+				nvidia,function = "vgp5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			front-cam-vio {
+				nvidia,pins = "ulpi_nxt_py2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			rear-cam-rst {
+				nvidia,pins = "gmi_cs3_n_pk4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			rear-cam-eprom-pr {
+				nvidia,pins = "gmi_cs2_n_pk3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			rear-cam-vcm-pwdn {
+				nvidia,pins = "kb_row1_pr1";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Haptic pinmux */
+			haptic-en {
+				nvidia,pins = "gmi_ad9_ph1";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			haptic-osc {
+				nvidia,pins = "gmi_ad11_ph3";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Modem pinmux */
+			cp2ap-ack1-host-active {
+				nvidia,pins = "pu5";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cp2ap-ack2-host-wakeup {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ap2cp-ack2-suspend-req {
+				nvidia,pins = "kb_row14_ps6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ap2cp-ack1-slave-wakeup {
+				nvidia,pins = "kb_row15_ps7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cp-kkp {
+				nvidia,pins = "kb_col0_pq0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			cp-crash-irq {
+				nvidia,pins = "kb_row13_ps5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ap2cp-uarta-tx-ipc {
+				nvidia,pins = "pu0";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ap2cp-uarta-rx-ipc {
+				nvidia,pins = "pu1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			fota-ap-cts-cp-rts {
+				nvidia,pins = "pu2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			fota-ap-rts-cp-cts {
+				nvidia,pins = "pu3";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			modem-enable {
+				nvidia,pins = "ulpi_data7_po0";
+				nvidia,function = "hsi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			modem-reset {
+				nvidia,pins = "pv1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap-i2s2 {
+				nvidia,pins = "dap3_fs_pp0",
+						"dap3_din_pp1",
+						"dap3_dout_pp2",
+						"dap3_sclk_pp3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* GPIO power/drive control */
+			drive-i2c {
+				nvidia,pins = "drive_dbg",
+						"drive_at5",
+						"drive_gme",
+						"drive_ddc",
+						"drive_ao1";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+
+			drive-uart3 {
+				nvidia,pins = "drive_uart3";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+
+			drive-gmi {
+				nvidia,pins = "drive_at3";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+		};
+	};
+
+	uartb: serial@70006040 {
+		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
+		status = "okay";
+
+		/* GNSS GSD5T */
+	};
+
+	uartc: serial@70006200 {
+		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
+		status = "okay";
+
+		nvidia,adjust-baud-rates = <0 9600 100>,
+					   <9600 115200 200>,
+					   <1000000 4000000 136>;
+
+		/* BCM4330B1 37.4 MHz Class 1.5 ExtLNA */
+		bluetooth {
+			compatible = "brcm,bcm4330-bt";
+			max-speed = <4000000>;
+
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+			clock-names = "txco";
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(S, 4) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "host-wakeup";
+
+			device-wakeup-gpios = <&gpio TEGRA_GPIO(S, 3) GPIO_ACTIVE_HIGH>;
+			shutdown-gpios = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_HIGH>;
+
+			vbat-supply = <&vdd_3v3_vbat>;
+			vddio-supply = <&vdd_1v8_vio>;
+		};
+	};
+
+	uartd: serial@70006300 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
+		status = "okay";
+
+		/* Console */
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	gen1_i2c: i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* Aichi AMI306 digital compass */
+		magnetometer@e {
+			compatible = "asahi-kasei,ak8974";
+			reg = <0x0e>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 5) IRQ_TYPE_EDGE_RISING>;
+
+			avdd-supply = <&vdd_3v0_sen>;
+			dvdd-supply = <&vdd_1v8_vio>;
+
+			mount-matrix = "-1",  "0",  "0",
+					"0",  "1",  "0",
+					"0",  "0", "-1";
+		};
+
+		max98089: audio-codec@10 {
+			compatible = "maxim,max98089";
+			reg = <0x10>;
+
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+			clock-names = "mclk";
+
+			assigned-clocks = <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+			assigned-clock-parents = <&tegra_car TEGRA30_CLK_EXTERN1>;
+		};
+
+		nfc@28 {
+			compatible = "nxp,pn544-i2c";
+			reg = <0x28>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(W, 2) IRQ_TYPE_EDGE_RISING>;
+
+			enable-gpios = <&gpio TEGRA_GPIO(X, 5) GPIO_ACTIVE_HIGH>;
+			firmware-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
+		};
+
+		imu@68 {
+			compatible = "invensense,mpu6050";
+			reg = <0x68>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_RISING>;
+
+			vdd-supply = <&vdd_3v0_sen>;
+			vddio-supply = <&vdd_1v8_sen>;
+
+			mount-matrix =  "1",  "0",  "0",
+					"0",  "1",  "0",
+					"0",  "0", "-1";
+		};
+	};
+
+	gen2_i2c: i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* Synaptics RMI4 S3203B touchcreen */
+		touchscreen@20 {
+			compatible = "syna,rmi4-i2c";
+			reg = <0x20>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(Q, 3) IRQ_TYPE_EDGE_FALLING>;
+
+			vdd-supply = <&vdd_3v0_touch>;
+			vio-supply = <&vdd_1v8_touch>;
+
+			syna,reset-delay-ms = <20>;
+			syna,startup-delay-ms = <200>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			rmi4-f01@1 {
+				reg = <0x1>;
+				syna,nosleep-mode = <1>;
+			};
+
+			rmi4-f11@11 {
+				reg = <0x11>;
+				syna,sensor-type = <1>;
+
+				syna,clip-x-low = <0>;
+				syna,clip-y-low = <0>;
+			};
+		};
+	};
+
+	cam_i2c: i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		dw9714: coil@c {
+			compatible = "dongwoon,dw9714";
+			reg = <0x0c>;
+
+			enable-gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_HIGH>;
+
+			vcc-supply = <&vcc_focuser>;
+		};
+
+		camera-pmic@7d {
+			compatible = "ti,lp8720";
+			reg = <0x7d>;
+
+			enable-gpios = <&gpio TEGRA_GPIO(BB, 4) GPIO_ACTIVE_HIGH>;
+
+			vt_1v2_front: ldo1 {
+				regulator-name = "vt_1v2_dig";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			vt_2v7_front: ldo2 {
+				regulator-name = "vt_2v7_vana";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <2700000>;
+			};
+
+			vdd_2v7_rear: ldo3 {
+				regulator-name = "8m_2v7_vana";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			vio_1v8_rear: ldo4 {
+				regulator-name = "vio_1v8_cam";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vcc_focuser: ldo5 {
+				regulator-name = "8m_2v8_vcm";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			vdd_1v2_rear: buck {
+				regulator-name = "8m_1v2_cam";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+		};
+	};
+
+	hdmi_ddc: i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	pwr_i2c: i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: max77663@1c {
+			compatible = "maxim,max77663";
+			reg = <0x1c>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			system-power-controller;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&max77663_default>;
+
+			max77663_default: pinmux {
+				gpio1 {
+					pins = "gpio1";
+					function = "gpio";
+					drive-open-drain = <1>;
+				};
+
+				gpio4 {
+					pins = "gpio4";
+					function = "32k-out1";
+				};
+			};
+
+			fps {
+				fps0 {
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+				};
+
+				fps1 {
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
+				};
+
+				fps2 {
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+				};
+			};
+
+			regulators {
+				in-sd0-supply = <&vdd_5v0_vbus>;
+				in-sd1-supply = <&vdd_5v0_vbus>;
+				in-sd2-supply = <&vdd_5v0_vbus>;
+				in-sd3-supply = <&vdd_5v0_vbus>;
+
+				in-ldo0-1-supply = <&vdd_1v8_vio>;
+				in-ldo2-supply   = <&vdd_3v3_vbat>;
+				in-ldo3-5-supply = <&vdd_3v3_vbat>;
+				in-ldo4-6-supply = <&vdd_3v3_vbat>;
+				in-ldo7-8-supply = <&vdd_1v8_vio>;
+
+				vdd_cpu: sd0 {
+					regulator-name = "vdd_cpu";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-coupled-with = <&vdd_core>;
+					regulator-coupled-max-spread = <300000>;
+					regulator-max-step-microvolt = <100000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-cpu-regulator;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				vdd_core: sd1 {
+					regulator-name = "vdd_core";
+					regulator-min-microvolt = <950000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-coupled-with = <&vdd_cpu>;
+					regulator-coupled-max-spread = <300000>;
+					regulator-max-step-microvolt = <100000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-core-regulator;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+				};
+
+				vdd_1v8_vio: sd2 {
+					regulator-name = "vdd_1v8_gen";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				sd3 {
+					regulator-name = "vddio_ddr";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				ldo0 {
+					regulator-name = "avdd_pll";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+				};
+
+				ldo1 {
+					regulator-name = "vdd_ddr_hs";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				avdd_3v3_periph: ldo2 {
+					regulator-name = "avdd_usb";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				vdd_usd: ldo3 {
+					regulator-name = "vdd_sdmmc3";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-always-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+				};
+
+				vcore_emmc: ldo5 {
+					regulator-name = "vdd_ddr_rx";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+				};
+
+				avdd_1v8_hdmi_pll: ldo6 {
+					regulator-name = "avdd_osc";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				vdd_1v2_mhl: ldo7 {
+					regulator-name = "vdd_1v2_mhl";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1250000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				ldo8 {
+					regulator-name = "avdd_dsi_csi";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+			};
+		};
+
+		fuel-gauge@36 {
+			compatible = "maxim,max17043";
+			reg = <0x36>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_EDGE_FALLING>;
+
+			monitored-battery = <&battery>;
+
+			maxim,alert-low-soc-level = <10>;
+			wakeup-source;
+		};
+
+		power-sensor@40 {
+			compatible = "ti,ina230";
+			reg = <0x40>;
+
+			vs-supply = <&vdd_3v0_sen>;
+		};
+
+		nct72: temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(I, 5) IRQ_TYPE_EDGE_FALLING>;
+
+			vcc-supply = <&vdd_3v0_sen>;
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	i2c-mhl {
+		compatible = "i2c-gpio";
+
+		sda-gpios = <&gpio TEGRA_GPIO(Q, 7) (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio TEGRA_GPIO(Q, 6) (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+		i2c-gpio,delay-us = <5>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	spi@7000dc00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+
+		/* DSI bridge */
+	};
+
+	pmc@7000e400 {
+		status = "okay";
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <2>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <200>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <0>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
+
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <4>;
+			nvidia,bus-addr = <0x1c>;
+			nvidia,reg-addr = <0x41>;
+			nvidia,reg-data = <0x02>;
+		};
+	};
+
+	hda@70030000 {
+		status = "okay";
+	};
+
+	ahub@70080000 {
+		/* HIFI CODEC */
+		i2s@70080300 {		/* i2s0 */
+			status = "okay";
+		};
+
+		/* BASEBAND */
+		i2s@70080500 {		/* i2s2 */
+			status = "okay";
+		};
+
+		/* BT SCO */
+		i2s@70080600 {		/* i2s3 */
+			status = "okay";
+		};
+	};
+
+	sdmmc1: mmc@78000000 {
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_SDMMC1>;
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_C>;
+		assigned-clock-rates = <50000000>;
+
+		max-frequency = <50000000>;
+		keep-power-in-suspend;
+		bus-width = <4>;
+		non-removable;
+
+		mmc-pwrseq = <&brcm_wifi_pwrseq>;
+		vmmc-supply = <&vdd_3v3_vbat>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+
+		/* BCM4330B1 37.4 MHz Class 1.5 ExtLNA */
+		wifi@1 {
+			compatible = "brcm,bcm4329-fmac";
+			reg = <1>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host-wake";
+		};
+	};
+
+	sdmmc4: mmc@78000600 {
+		status = "okay";
+		bus-width = <8>;
+
+		non-removable;
+		mmc-ddr-1_8v;
+
+		vmmc-supply = <&vcore_emmc>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+	};
+
+	/* Micro USB */
+	usb@7d000000 {
+		compatible = "nvidia,tegra30-udc";
+		status = "okay";
+		dr_mode = "peripheral";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		dr_mode = "peripheral";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		vbus-supply = <&avdd_3v3_periph>;
+	};
+
+	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "pmic-oscillator";
+	};
+
+	gps_refclk: clock-gps {
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+		clock-accuracy = <100>;
+		#clock-cells = <0>;
+	};
+
+	gps_osc: clock-gps-osc-gate {
+		compatible = "gpio-gate-clock";
+		enable-gpios = <&gpio TEGRA_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
+		clocks = <&gps_refclk>;
+		#clock-cells = <0>;
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu1: cpu@1 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu2: cpu@2 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu3: cpu@3 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(O, 4) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-keypad {
+			label = "keypad::white";
+			gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+		};
+	};
+
+	opp-table-actmon {
+		/delete-node/ opp-625000000;
+		/delete-node/ opp-667000000;
+		/delete-node/ opp-750000000;
+		/delete-node/ opp-800000000;
+		/delete-node/ opp-900000000;
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-625000000-1200;
+		/delete-node/ opp-625000000-1250;
+		/delete-node/ opp-667000000-1200;
+		/delete-node/ opp-750000000-1300;
+		/delete-node/ opp-800000000-1300;
+		/delete-node/ opp-900000000-1350;
+	};
+
+	brcm_wifi_pwrseq: pwrseq-wifi {
+		compatible = "mmc-pwrseq-simple";
+
+		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+		clock-names = "ext_clock";
+
+		reset-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <300>;
+		power-off-delay-us = <300>;
+	};
+
+	vdd_5v0_vbus: regulator-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_3v3_vbat: regulator-vbat {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_vbat";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_5v0_vbus>;
+	};
+
+	vdd_3v0_sen: regulator-sen3v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v0_sensor";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_vbat>;
+	};
+
+	vdd_3v0_proxi: regulator-proxi {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v0_proxi";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_vbat>;
+	};
+
+	vdd_1v8_sen: regulator-sen1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v8_sensor";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(D, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_vbat>;
+	};
+
+	vcc_3v0_lcd: regulator-lcd3v {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v0_lcd";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		regulator-boot-on;
+		vin-supply = <&vdd_3v3_vbat>;
+	};
+
+	iovcc_1v8_lcd: regulator-lcd1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "iovcc_1v8_lcd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(Y, 0) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_vbat>;
+	};
+
+	vio_1v8_mhl: regulator-mhl1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vio_1v8_mhl";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_vbat>;
+	};
+
+	vdd_3v0_touch: regulator-touchpwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v0_touch";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(Q, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_vbat>;
+	};
+
+	vdd_1v8_touch: regulator-touchvio {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v8_touch";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_vbat>;
+	};
+
+	vcc_1v8_gps: regulator-gps {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v8_gps";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(Y, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_vbat>;
+	};
+
+	vio_1v8_front: regulator-frontvio {
+		compatible = "regulator-fixed";
+		regulator-name = "vt_1v8_cam_vio";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio TEGRA_GPIO(Y, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_vbat>;
+	};
+
+	sound {
+		nvidia,audio-routing =
+			"Headphone Jack", "HPL",
+			"Headphone Jack", "HPR",
+			"Int Spk", "SPKL",
+			"Int Spk", "SPKR",
+			"Earpiece", "RECL",
+			"Earpiece", "RECR",
+			"INA1", "Mic Jack",
+			"MIC1", "MICBIAS",
+			"MICBIAS", "Internal Mic 1",
+			"MIC2", "Internal Mic 2";
+
+		nvidia,i2s-controller = <&tegra_i2s0>;
+		nvidia,audio-codec = <&max98089>;
+
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(BB, 6) GPIO_ACTIVE_LOW>;
+		nvidia,mic-det-gpios = <&gpio TEGRA_GPIO(O, 5) GPIO_ACTIVE_HIGH>;
+		nvidia,ext-mic-en-gpios = <&gpio TEGRA_GPIO(X, 0) GPIO_ACTIVE_HIGH>;
+		nvidia,coupled-mic-hp-det;
+
+		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA30_CLK_EXTERN1>;
+	};
+
+	thermal-zones {
+		/*
+		 * NCT72 has two sensors:
+		 *
+		 *	0: internal that monitors ambient/skin temperature
+		 *	1: external that is connected to the CPU's diode
+		 *
+		 * Ideally we should use userspace thermal governor,
+		 * but it's a much more complex solution. The "skin"
+		 * zone exists as a simpler solution which prevents
+		 * this device from getting too hot from a user's
+		 * tactile perspective. The CPU zone is intended to
+		 * protect silicon from damage.
+		 */
+
+		skin-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct72 0>;
+
+			trips {
+				trip0: skin-alert {
+					/* throttle at 50C until temperature drops to 49.8C */
+					temperature = <50000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip1: skin-crit {
+					/* shut down at 60C */
+					temperature = <60000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&trip0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT
+								  THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct72 1>;
+
+			trips {
+				trip2: cpu-alert {
+					/* throttle at 75C until temperature drops to 74.8C */
+					temperature = <75000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip3: cpu-crit {
+					/* shut down at 90C */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&trip2>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT
+								  THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-ouya.dts b/arch/arm/boot/dts/nvidia/tegra30-ouya.dts
new file mode 100644
index 000000000000..7e3de26ca960
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-ouya.dts
@@ -0,0 +1,4798 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "tegra30.dtsi"
+#include "tegra30-cpu-opp.dtsi"
+#include "tegra30-cpu-opp-microvolt.dtsi"
+
+/ {
+	model = "Ouya Game Console";
+	compatible = "ouya,ouya", "nvidia,tegra30";
+
+	aliases {
+		mmc0 = &sdmmc4; /* eMMC */
+		mmc1 = &sdmmc3; /* WiFi */
+		rtc0 = &pmic;
+		rtc1 = "/rtc@7000e000";
+		serial0 = &uartd; /* Debug Port */
+		serial1 = &uartc; /* Bluetooth */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	firmware {
+		trusted-foundations {
+			compatible = "tlm,trusted-foundations";
+			tlm,version-major = <0x0>;
+			tlm,version-minor = <0x0>;
+		};
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		linux,cma@80000000 {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0x80000000 0x30000000>;
+			size = <0x10000000>; /* 256MiB */
+			linux,cma-default;
+			reusable;
+		};
+
+		ramoops@bfdf0000 {
+			compatible = "ramoops";
+			reg = <0xbfdf0000 0x10000>;	/* 64kB */
+			console-size = <0x8000>;	/* 32kB */
+			record-size = <0x400>;		/*  1kB */
+			ecc-size = <16>;
+		};
+
+		trustzone@bfe00000 {
+			reg = <0xbfe00000 0x200000>;
+			no-map;
+		};
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			status = "okay";
+			vdd-supply = <&vdd_vid_reg>;
+			pll-supply = <&ldo7_reg>;
+			hdmi-supply = <&sys_3v3_reg>;
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			clk_32k_out_pa0 {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,function = "blink";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			uart3_cts_n_pa1 {
+				nvidia,pins = "uart3_cts_n_pa1";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap2_fs_pa2 {
+				nvidia,pins = "dap2_fs_pa2";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap2_sclk_pa3 {
+				nvidia,pins = "dap2_sclk_pa3";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap2_din_pa4 {
+				nvidia,pins = "dap2_din_pa4";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap2_dout_pa5 {
+				nvidia,pins = "dap2_dout_pa5";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc3_cmd_pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_a17_pb0 {
+				nvidia,pins = "gmi_a17_pb0";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_a18_pb1 {
+				nvidia,pins = "gmi_a18_pb1";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_pwr0_pb2 {
+				nvidia,pins = "lcd_pwr0_pb2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_pclk_pb3 {
+				nvidia,pins = "lcd_pclk_pb3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc3_dat3_pb4 {
+				nvidia,pins = "sdmmc3_dat3_pb4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc3_dat2_pb5 {
+				nvidia,pins = "sdmmc3_dat2_pb5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc3_dat1_pb6 {
+				nvidia,pins = "sdmmc3_dat1_pb6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc3_dat0_pb7 {
+				nvidia,pins = "sdmmc3_dat0_pb7";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			uart3_rts_n_pc0 {
+				nvidia,pins = "uart3_rts_n_pc0";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_pwr1_pc1 {
+				nvidia,pins = "lcd_pwr1_pc1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			uart2_txd_pc2 {
+				nvidia,pins = "uart2_txd_pc2";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			uart2_rxd_pc3 {
+				nvidia,pins = "uart2_rxd_pc3";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gen1_i2c_scl_pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			gen1_i2c_sda_pc5 {
+				nvidia,pins = "gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_pwr2_pc6 {
+				nvidia,pins = "lcd_pwr2_pc6";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_wp_n_pc7 {
+				nvidia,pins = "gmi_wp_n_pc7";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc3_dat5_pd0 {
+				nvidia,pins = "sdmmc3_dat5_pd0";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc3_dat4_pd1 {
+				nvidia,pins = "sdmmc3_dat4_pd1";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			lcd_dc1_pd2 {
+				nvidia,pins = "lcd_dc1_pd2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc3_dat6_pd3 {
+				nvidia,pins = "sdmmc3_dat6_pd3";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc3_dat7_pd4 {
+				nvidia,pins = "sdmmc3_dat7_pd4";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d1_pd5 {
+				nvidia,pins = "vi_d1_pd5";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vi_vsync_pd6 {
+				nvidia,pins = "vi_vsync_pd6";
+				nvidia,function = "ddr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vi_hsync_pd7 {
+				nvidia,pins = "vi_hsync_pd7";
+				nvidia,function = "ddr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			lcd_d0_pe0 {
+				nvidia,pins = "lcd_d0_pe0";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d1_pe1 {
+				nvidia,pins = "lcd_d1_pe1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d2_pe2 {
+				nvidia,pins = "lcd_d2_pe2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d3_pe3 {
+				nvidia,pins = "lcd_d3_pe3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d4_pe4 {
+				nvidia,pins = "lcd_d4_pe4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d5_pe5 {
+				nvidia,pins = "lcd_d5_pe5";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d6_pe6 {
+				nvidia,pins = "lcd_d6_pe6";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d7_pe7 {
+				nvidia,pins = "lcd_d7_pe7";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d8_pf0 {
+				nvidia,pins = "lcd_d8_pf0";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d9_pf1 {
+				nvidia,pins = "lcd_d9_pf1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d10_pf2 {
+				nvidia,pins = "lcd_d10_pf2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d11_pf3 {
+				nvidia,pins = "lcd_d11_pf3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d12_pf4 {
+				nvidia,pins = "lcd_d12_pf4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d13_pf5 {
+				nvidia,pins = "lcd_d13_pf5";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d14_pf6 {
+				nvidia,pins = "lcd_d14_pf6";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d15_pf7 {
+				nvidia,pins = "lcd_d15_pf7";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad0_pg0 {
+				nvidia,pins = "gmi_ad0_pg0";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_ad1_pg1 {
+				nvidia,pins = "gmi_ad1_pg1";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad2_pg2 {
+				nvidia,pins = "gmi_ad2_pg2";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_ad3_pg3 {
+				nvidia,pins = "gmi_ad3_pg3";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_ad4_pg4 {
+				nvidia,pins = "gmi_ad4_pg4";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_ad5_pg5 {
+				nvidia,pins = "gmi_ad5_pg5";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_ad6_pg6 {
+				nvidia,pins = "gmi_ad6_pg6";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_ad7_pg7 {
+				nvidia,pins = "gmi_ad7_pg7";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_ad8_ph0 {
+				nvidia,pins = "gmi_ad8_ph0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad9_ph1 {
+				nvidia,pins = "gmi_ad9_ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad10_ph2 {
+				nvidia,pins = "gmi_ad10_ph2";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad11_ph3 {
+				nvidia,pins = "gmi_ad11_ph3";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad12_ph4 {
+				nvidia,pins = "gmi_ad12_ph4";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad13_ph5 {
+				nvidia,pins = "gmi_ad13_ph5";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad14_ph6 {
+				nvidia,pins = "gmi_ad14_ph6";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_wr_n_pi0 {
+				nvidia,pins = "gmi_wr_n_pi0";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_oe_n_pi1 {
+				nvidia,pins = "gmi_oe_n_pi1";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_dqs_pi2 {
+				nvidia,pins = "gmi_dqs_pi2";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_iordy_pi5 {
+				nvidia,pins = "gmi_iordy_pi5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_cs7_n_pi6 {
+				nvidia,pins = "gmi_cs7_n_pi6";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_wait_pi7 {
+				nvidia,pins = "gmi_wait_pi7";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_de_pj1 {
+				nvidia,pins = "lcd_de_pj1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_cs1_n_pj2 {
+				nvidia,pins = "gmi_cs1_n_pj2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_hsync_pj3 {
+				nvidia,pins = "lcd_hsync_pj3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_vsync_pj4 {
+				nvidia,pins = "lcd_vsync_pj4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			uart2_cts_n_pj5 {
+				nvidia,pins = "uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			uart2_rts_n_pj6 {
+				nvidia,pins = "uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_a16_pj7 {
+				nvidia,pins = "gmi_a16_pj7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_adv_n_pk0 {
+				nvidia,pins = "gmi_adv_n_pk0";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_clk_pk1 {
+				nvidia,pins = "gmi_clk_pk1";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_cs2_n_pk3 {
+				nvidia,pins = "gmi_cs2_n_pk3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_cs3_n_pk4 {
+				nvidia,pins = "gmi_cs3_n_pk4";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spdif_out_pk5 {
+				nvidia,pins = "spdif_out_pk5";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spdif_in_pk6 {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_a19_pk7 {
+				nvidia,pins = "gmi_a19_pk7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d2_pl0 {
+				nvidia,pins = "vi_d2_pl0";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d3_pl1 {
+				nvidia,pins = "vi_d3_pl1";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d4_pl2 {
+				nvidia,pins = "vi_d4_pl2";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d5_pl3 {
+				nvidia,pins = "vi_d5_pl3";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d6_pl4 {
+				nvidia,pins = "vi_d6_pl4";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d7_pl5 {
+				nvidia,pins = "vi_d7_pl5";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d8_pl6 {
+				nvidia,pins = "vi_d8_pl6";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d9_pl7 {
+				nvidia,pins = "vi_d9_pl7";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d16_pm0 {
+				nvidia,pins = "lcd_d16_pm0";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d17_pm1 {
+				nvidia,pins = "lcd_d17_pm1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d18_pm2 {
+				nvidia,pins = "lcd_d18_pm2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d19_pm3 {
+				nvidia,pins = "lcd_d19_pm3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d20_pm4 {
+				nvidia,pins = "lcd_d20_pm4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d21_pm5 {
+				nvidia,pins = "lcd_d21_pm5";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d22_pm6 {
+				nvidia,pins = "lcd_d22_pm6";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d23_pm7 {
+				nvidia,pins = "lcd_d23_pm7";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			dap1_fs_pn0 {
+				nvidia,pins = "dap1_fs_pn0";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap1_din_pn1 {
+				nvidia,pins = "dap1_din_pn1";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap1_dout_pn2 {
+				nvidia,pins = "dap1_dout_pn2";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap1_sclk_pn3 {
+				nvidia,pins = "dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			lcd_cs0_n_pn4 {
+				nvidia,pins = "lcd_cs0_n_pn4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_sdout_pn5 {
+				nvidia,pins = "lcd_sdout_pn5";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_dc0_pn6 {
+				nvidia,pins = "lcd_dc0_pn6";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			hdmi_int_pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "hdmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ulpi_data7_po0 {
+				nvidia,pins = "ulpi_data7_po0";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ulpi_data0_po1 {
+				nvidia,pins = "ulpi_data0_po1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ulpi_data1_po2 {
+				nvidia,pins = "ulpi_data1_po2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ulpi_data2_po3 {
+				nvidia,pins = "ulpi_data2_po3";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ulpi_data3_po4 {
+				nvidia,pins = "ulpi_data3_po4";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ulpi_data4_po5 {
+				nvidia,pins = "ulpi_data4_po5";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ulpi_data5_po6 {
+				nvidia,pins = "ulpi_data5_po6";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ulpi_data6_po7 {
+				nvidia,pins = "ulpi_data6_po7";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			dap3_fs_pp0 {
+				nvidia,pins = "dap3_fs_pp0";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap3_din_pp1 {
+				nvidia,pins = "dap3_din_pp1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap3_dout_pp2 {
+				nvidia,pins = "dap3_dout_pp2";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap3_sclk_pp3 {
+				nvidia,pins = "dap3_sclk_pp3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap4_fs_pp4 {
+				nvidia,pins = "dap4_fs_pp4";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap4_din_pp5 {
+				nvidia,pins = "dap4_din_pp5";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap4_dout_pp6 {
+				nvidia,pins = "dap4_dout_pp6";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap4_sclk_pp7 {
+				nvidia,pins = "dap4_sclk_pp7";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kb_col0_pq0 {
+				nvidia,pins = "kb_col0_pq0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_col1_pq1 {
+				nvidia,pins = "kb_col1_pq1";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_col2_pq2 {
+				nvidia,pins = "kb_col2_pq2";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_col3_pq3 {
+				nvidia,pins = "kb_col3_pq3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_col4_pq4 {
+				nvidia,pins = "kb_col4_pq4";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_col5_pq5 {
+				nvidia,pins = "kb_col5_pq5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_col6_pq6 {
+				nvidia,pins = "kb_col6_pq6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_col7_pq7 {
+				nvidia,pins = "kb_col7_pq7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row0_pr0 {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row1_pr1 {
+				nvidia,pins = "kb_row1_pr1";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row2_pr2 {
+				nvidia,pins = "kb_row2_pr2";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row3_pr3 {
+				nvidia,pins = "kb_row3_pr3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row4_pr4 {
+				nvidia,pins = "kb_row4_pr4";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row5_pr5 {
+				nvidia,pins = "kb_row5_pr5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row6_pr6 {
+				nvidia,pins = "kb_row6_pr6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kb_row8_ps0 {
+				nvidia,pins = "kb_row8_ps0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row9_ps1 {
+				nvidia,pins = "kb_row9_ps1";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row10_ps2 {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row11_ps3 {
+				nvidia,pins = "kb_row11_ps3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row12_ps4 {
+				nvidia,pins = "kb_row12_ps4";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row13_ps5 {
+				nvidia,pins = "kb_row13_ps5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row14_ps6 {
+				nvidia,pins = "kb_row14_ps6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row15_ps7 {
+				nvidia,pins = "kb_row15_ps7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_pclk_pt0 {
+				nvidia,pins = "vi_pclk_pt0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_mclk_pt1 {
+				nvidia,pins = "vi_mclk_pt1";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d10_pt2 {
+				nvidia,pins = "vi_d10_pt2";
+				nvidia,function = "ddr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vi_d11_pt3 {
+				nvidia,pins = "vi_d11_pt3";
+				nvidia,function = "ddr";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vi_d0_pt4 {
+				nvidia,pins = "vi_d0_pt4";
+				nvidia,function = "ddr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gen2_i2c_scl_pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			gen2_i2c_sda_pt6 {
+				nvidia,pins = "gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc4_cmd_pt7 {
+				nvidia,pins = "sdmmc4_cmd_pt7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,io-reset = <TEGRA_PIN_DISABLE>;
+			};
+
+			pu0 {
+				nvidia,pins = "pu0";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pu1 {
+				nvidia,pins = "pu1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pu2 {
+				nvidia,pins = "pu2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pu4 {
+				nvidia,pins = "pu4";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pu5 {
+				nvidia,pins = "pu5";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pu6 {
+				nvidia,pins = "pu6";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			jtag_rtck_pu7 {
+				nvidia,pins = "jtag_rtck_pu7";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pv0 {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pv1 {
+				nvidia,pins = "pv1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pv2 {
+				nvidia,pins = "pv2";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pv3 {
+				nvidia,pins = "pv3";
+				nvidia,function = "clk_12m_out";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ddc_scl_pv4 {
+				nvidia,pins = "ddc_scl_pv4";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ddc_sda_pv5 {
+				nvidia,pins = "ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			crt_hsync_pv6 {
+				nvidia,pins = "crt_hsync_pv6";
+				nvidia,function = "crt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			crt_vsync_pv7 {
+				nvidia,pins = "crt_vsync_pv7";
+				nvidia,function = "crt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_cs1_n_pw0 {
+				nvidia,pins = "lcd_cs1_n_pw0";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_m1_pw1 {
+				nvidia,pins = "lcd_m1_pw1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spi2_cs1_n_pw2 {
+				nvidia,pins = "spi2_cs1_n_pw2";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk1_out_pw4 {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk2_out_pw5 {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "extperiph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			uart3_txd_pw6 {
+				nvidia,pins = "uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			uart3_rxd_pw7 {
+				nvidia,pins = "uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			spi2_sck_px2 {
+				nvidia,pins = "spi2_sck_px2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spi1_mosi_px4 {
+				nvidia,pins = "spi1_mosi_px4";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spi1_sck_px5 {
+				nvidia,pins = "spi1_sck_px5";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spi1_cs0_n_px6 {
+				nvidia,pins = "spi1_cs0_n_px6";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spi1_miso_px7 {
+				nvidia,pins = "spi1_miso_px7";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ulpi_clk_py0 {
+				nvidia,pins = "ulpi_clk_py0";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ulpi_dir_py1 {
+				nvidia,pins = "ulpi_dir_py1";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ulpi_nxt_py2 {
+				nvidia,pins = "ulpi_nxt_py2";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ulpi_stp_py3 {
+				nvidia,pins = "ulpi_stp_py3";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc1_dat3_py4 {
+				nvidia,pins = "sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc1_dat2_py5 {
+				nvidia,pins = "sdmmc1_dat2_py5";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc1_dat1_py6 {
+				nvidia,pins = "sdmmc1_dat1_py6";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc1_dat0_py7 {
+				nvidia,pins = "sdmmc1_dat0_py7";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc1_cmd_pz1 {
+				nvidia,pins = "sdmmc1_cmd_pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_sdin_pz2 {
+				nvidia,pins = "lcd_sdin_pz2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_wr_n_pz3 {
+				nvidia,pins = "lcd_wr_n_pz3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_sck_pz4 {
+				nvidia,pins = "lcd_sck_pz4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sys_clk_req_pz5 {
+				nvidia,pins = "sys_clk_req_pz5";
+				nvidia,function = "sysclk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pwr_i2c_scl_pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			pwr_i2c_sda_pz7 {
+				nvidia,pins = "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc4_dat0_paa0 {
+				nvidia,pins = "sdmmc4_dat0_paa0";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,io-reset = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc4_dat1_paa1 {
+				nvidia,pins = "sdmmc4_dat1_paa1";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,io-reset = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc4_dat2_paa2 {
+				nvidia,pins = "sdmmc4_dat2_paa2";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,io-reset = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc4_dat3_paa3 {
+				nvidia,pins = "sdmmc4_dat3_paa3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,io-reset = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc4_dat4_paa4 {
+				nvidia,pins = "sdmmc4_dat4_paa4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,io-reset = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc4_dat5_paa5 {
+				nvidia,pins = "sdmmc4_dat5_paa5";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,io-reset = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc4_dat6_paa6 {
+				nvidia,pins = "sdmmc4_dat6_paa6";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,io-reset = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc4_dat7_paa7 {
+				nvidia,pins = "sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,io-reset = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb0 {
+				nvidia,pins = "pbb0";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			cam_i2c_scl_pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			cam_i2c_sda_pbb2 {
+				nvidia,pins = "cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb4 {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb5 {
+				nvidia,pins = "pbb5";
+				nvidia,function = "vgp5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb6 {
+				nvidia,pins = "pbb6";
+				nvidia,function = "vgp6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb7 {
+				nvidia,pins = "pbb7";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			cam_mclk_pcc0 {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pcc1 {
+				nvidia,pins = "pcc1";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pcc2 {
+				nvidia,pins = "pcc2";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc4_rst_n_pcc3 {
+				nvidia,pins = "sdmmc4_rst_n_pcc3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,io-reset = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc4_clk_pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,io-reset = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk2_req_pcc5 {
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "dap";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pex_l2_rst_n_pcc6 {
+				nvidia,pins = "pex_l2_rst_n_pcc6";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pex_l2_clkreq_n_pcc7 {
+				nvidia,pins = "pex_l2_clkreq_n_pcc7";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pex_l0_prsnt_n_pdd0 {
+				nvidia,pins = "pex_l0_prsnt_n_pdd0";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pex_l0_rst_n_pdd1 {
+				nvidia,pins = "pex_l0_rst_n_pdd1";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pex_l0_clkreq_n_pdd2 {
+				nvidia,pins = "pex_l0_clkreq_n_pdd2";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pex_wake_n_pdd3 {
+				nvidia,pins = "pex_wake_n_pdd3";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pex_l1_prsnt_n_pdd4 {
+				nvidia,pins = "pex_l1_prsnt_n_pdd4";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pex_l1_rst_n_pdd5 {
+				nvidia,pins = "pex_l1_rst_n_pdd5";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pex_l1_clkreq_n_pdd6 {
+				nvidia,pins = "pex_l1_clkreq_n_pdd6";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pex_l2_prsnt_n_pdd7 {
+				nvidia,pins = "pex_l2_prsnt_n_pdd7";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk3_out_pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk3_req_pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "dev3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk1_req_pee2 {
+				nvidia,pins = "clk1_req_pee2";
+				nvidia,function = "dap";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			hdmi_cec_pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			drive_groups {
+				nvidia,pins = "drive_gma",
+					      "drive_gmb",
+					      "drive_gmc",
+					      "drive_gmd";
+				nvidia,pull-down-strength = <9>;
+				nvidia,pull-up-strength = <9>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+		};
+	};
+
+	uartc: serial@70006200 {
+		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
+		status = "okay";
+
+		nvidia,adjust-baud-rates = <0 9600 100>,
+					   <9600 115200 200>,
+					   <1000000 4000000 136>;
+
+		/* Azurewave AW-NH660 BCM4330B1 */
+		bluetooth {
+			compatible = "brcm,bcm4330-bt";
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "host-wakeup";
+
+			max-speed = <4000000>;
+
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+			clock-names = "txco";
+
+			vbat-supply  = <&sys_3v3_reg>;
+			vddio-supply = <&vdd_1v8>;
+
+			shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
+			device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	uartd: serial@70006300 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
+		status = "okay";
+	};
+
+	hdmi_ddc: i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: pmic@2d {
+			compatible = "ti,tps65911";
+			reg = <0x2d>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			wakeup-source;
+
+			ti,en-gpio-sleep = <0 1 1 1 1 1 0 0 1>;
+			ti,system-power-controller;
+			ti,sleep-keep-ck32k;
+			ti,sleep-enable;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			vcc1-supply = <&vdd_5v0_reg>;
+			vcc2-supply = <&vdd_5v0_reg>;
+			vcc3-supply = <&vdd_1v8>;
+			vcc4-supply = <&vdd_5v0_reg>;
+			vcc5-supply = <&vdd_5v0_reg>;
+			vcc6-supply = <&vdd2_reg>;
+			vcc7-supply = <&vdd_5v0_reg>;
+			vccio-supply = <&vdd_5v0_reg>;
+
+			regulators {
+				vdd1_reg: vdd1 {
+					regulator-name = "vddio_ddr_1v2";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				vdd2_reg: vdd2 {
+					regulator-name = "vdd_1v5_gen";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+				};
+
+				vdd_cpu: vddctrl {
+					regulator-name = "vdd_cpu,vdd_sys";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1270000>;
+					regulator-coupled-with = <&vdd_core>;
+					regulator-coupled-max-spread = <300000>;
+					regulator-max-step-microvolt = <100000>;
+					regulator-always-on;
+
+					nvidia,tegra-cpu-regulator;
+				};
+
+				vdd_1v8: vio {
+					regulator-name = "vdd_1v8_gen";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo1_reg: ldo1 {
+					regulator-name = "vdd_pexa,vdd_pexb";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-always-on;
+				};
+
+				ldo2_reg: ldo2 {
+					regulator-name = "vdd_sata,avdd_plle";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-always-on;
+				};
+
+				/* LDO3 is not connected to anything */
+
+				ldo4_reg: ldo4 {
+					regulator-name = "vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo5_reg: ldo5 {
+					regulator-name = "vddio_sdmmc,avdd_vdac";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo6_reg: ldo6 {
+					regulator-name = "avdd_dsi_csi,pwrdet_mipi";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo7_reg: ldo7 {
+					regulator-name = "vdd_pllm,x,u,a_p_c_s";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo8_reg: ldo8 {
+					regulator-name = "vdd_ddr_hs";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		cpu_temp: nct1008@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+			vcc-supply = <&sys_3v3_reg>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_EDGE_FALLING>;
+
+			#thermal-sensor-cells = <1>;
+		};
+
+		vdd_core: tps62361@60 {
+			compatible = "ti,tps62361";
+			reg = <0x60>;
+
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <950000>;
+			regulator-max-microvolt = <1350000>;
+			regulator-coupled-with = <&vdd_cpu>;
+			regulator-coupled-max-spread = <300000>;
+			regulator-max-step-microvolt = <100000>;
+			regulator-boot-on;
+			regulator-always-on;
+			ti,vsel0-state-high;
+			ti,vsel1-state-high;
+			ti,enable-vout-discharge;
+
+			nvidia,tegra-core-regulator;
+		};
+	};
+
+	pmc@7000e400 {
+		status = "okay";
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <200>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <458>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
+	};
+
+	memory-controller@7000f000 {
+		emc-timings-0 {
+			nvidia,ram-code = <0>; /* Samsung RAM */
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+				nvidia,emem-configuration = <
+					0x00030003 /* MC_EMEM_ARB_CFG */
+					0xc0000010 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x75830303 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+				nvidia,emem-configuration = <
+					0x00010003 /* MC_EMEM_ARB_CFG */
+					0xc0000010 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x74630303 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+				nvidia,emem-configuration = <
+					0x00000003 /* MC_EMEM_ARB_CFG */
+					0xc0000018 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0503 /* MC_EMEM_ARB_DA_COVERS */
+					0x73c30504 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+				nvidia,emem-configuration = <
+					0x00000006 /* MC_EMEM_ARB_CFG */
+					0xc0000025 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000004 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0505 /* MC_EMEM_ARB_DA_COVERS */
+					0x73840a06 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+				nvidia,emem-configuration = <
+					0x0000000c /* MC_EMEM_ARB_CFG */
+					0xc0000048 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000009 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000007 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030202 /* MC_EMEM_ARB_DA_TURNS */
+					0x000d0709 /* MC_EMEM_ARB_DA_COVERS */
+					0x7086120a /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-800000000 {
+				clock-frequency = <800000000>;
+				nvidia,emem-configuration = <
+					0x00000018 /* MC_EMEM_ARB_CFG */
+					0xc0000090 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000013 /* MC_EMEM_ARB_TIMING_RC */
+					0x0000000c /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000f /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000008 /* MC_EMEM_ARB_TIMING_W2R */
+					0x08040202 /* MC_EMEM_ARB_DA_TURNS */
+					0x00160d13 /* MC_EMEM_ARB_DA_COVERS */
+					0x712c2414 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+		};
+
+		emc-timings-1 {
+			nvidia,ram-code = <1>; /* Hynix M RAM */
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+				nvidia,emem-configuration = <
+					0x00030003 /* MC_EMEM_ARB_CFG */
+					0xc0000010 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x75830303 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+				nvidia,emem-configuration = <
+					0x00010003 /* MC_EMEM_ARB_CFG */
+					0xc0000010 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x74630303 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+				nvidia,emem-configuration = <
+					0x00000003 /* MC_EMEM_ARB_CFG */
+					0xc0000018 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0503 /* MC_EMEM_ARB_DA_COVERS */
+					0x73c30504 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+				nvidia,emem-configuration = <
+					0x00000006 /* MC_EMEM_ARB_CFG */
+					0xc0000025 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000004 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0505 /* MC_EMEM_ARB_DA_COVERS */
+					0x73840a06 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+				nvidia,emem-configuration = <
+					0x0000000c /* MC_EMEM_ARB_CFG */
+					0xc0000048 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000009 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000007 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030202 /* MC_EMEM_ARB_DA_TURNS */
+					0x000d0709 /* MC_EMEM_ARB_DA_COVERS */
+					0x7086120a /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-800000000 {
+				clock-frequency = <800000000>;
+				nvidia,emem-configuration = <
+					0x00000018 /* MC_EMEM_ARB_CFG */
+					0xc0000090 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000013 /* MC_EMEM_ARB_TIMING_RC */
+					0x0000000c /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000f /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000008 /* MC_EMEM_ARB_TIMING_W2R */
+					0x08040202 /* MC_EMEM_ARB_DA_TURNS */
+					0x00160d13 /* MC_EMEM_ARB_DA_COVERS */
+					0x712c2414 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+		};
+
+		emc-timings-2 {
+			nvidia,ram-code = <2>; /* Hynix A RAM */
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+				nvidia,emem-configuration = <
+					0x00030003 /* MC_EMEM_ARB_CFG */
+					0xc0000010 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x75e30303 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+				nvidia,emem-configuration = <
+					0x00010003 /* MC_EMEM_ARB_CFG */
+					0xc0000010 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x74e30303 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+				nvidia,emem-configuration = <
+					0x00000003 /* MC_EMEM_ARB_CFG */
+					0xc0000018 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0503 /* MC_EMEM_ARB_DA_COVERS */
+					0x74430504 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+				nvidia,emem-configuration = <
+					0x00000006 /* MC_EMEM_ARB_CFG */
+					0xc0000025 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000004 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0505 /* MC_EMEM_ARB_DA_COVERS */
+					0x74040a06 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+				nvidia,emem-configuration = <
+					0x0000000c /* MC_EMEM_ARB_CFG */
+					0xc0000048 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000009 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000007 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030202 /* MC_EMEM_ARB_DA_TURNS */
+					0x000d0709 /* MC_EMEM_ARB_DA_COVERS */
+					0x7086120a /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-800000000 {
+				clock-frequency = <800000000>;
+				nvidia,emem-configuration = <
+					0x00000018 /* MC_EMEM_ARB_CFG */
+					0xc0000090 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000013 /* MC_EMEM_ARB_TIMING_RC */
+					0x0000000c /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000f /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000008 /* MC_EMEM_ARB_TIMING_W2R */
+					0x08040202 /* MC_EMEM_ARB_DA_TURNS */
+					0x00160d13 /* MC_EMEM_ARB_DA_COVERS */
+					0x712c2414 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+		};
+	};
+
+	memory-controller@7000f400 {
+		emc-timings-0 {
+			nvidia,ram-code = <0>;  /* Samsung RAM */
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-configuration = <
+					0x00000001 /* EMC_RC */
+					0x00000006 /* EMC_RFC */
+					0x00000000 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x000000c0 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000030 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000007 /* EMC_TXSR */
+					0x00000007 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000002 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x000000c7 /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000287 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-configuration = <
+					0x00000002 /* EMC_RC */
+					0x0000000d /* EMC_RFC */
+					0x00000001 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000181 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000060 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x0000000e /* EMC_TXSR */
+					0x0000000e /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000003 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x0000018e /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x8000040b /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-configuration = <
+					0x00000004 /* EMC_RC */
+					0x0000001a /* EMC_RFC */
+					0x00000003 /* EMC_RAS */
+					0x00000001 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000001 /* EMC_RD_RCD */
+					0x00000001 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000303 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000000c0 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x0000001c /* EMC_TXSR */
+					0x0000001c /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x0000031c /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000713 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-configuration = <
+					0x00000009 /* EMC_RC */
+					0x00000035 /* EMC_RFC */
+					0x00000007 /* EMC_RAS */
+					0x00000002 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000002 /* EMC_RD_RCD */
+					0x00000002 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000607 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000181 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000038 /* EMC_TXSR */
+					0x00000038 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000009 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000638 /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000006 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x004400a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00080000 /* EMC_DLL_XFORM_DQS0 */
+					0x00080000 /* EMC_DLL_XFORM_DQS1 */
+					0x00080000 /* EMC_DLL_XFORM_DQS2 */
+					0x00080000 /* EMC_DLL_XFORM_DQS3 */
+					0x00080000 /* EMC_DLL_XFORM_DQS4 */
+					0x00080000 /* EMC_DLL_XFORM_DQS5 */
+					0x00080000 /* EMC_DLL_XFORM_DQS6 */
+					0x00080000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00080000 /* EMC_DLL_XFORM_DQ0 */
+					0x00080000 /* EMC_DLL_XFORM_DQ1 */
+					0x00080000 /* EMC_DLL_XFORM_DQ2 */
+					0x00080000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000d22 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-reset = <0x80000521>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-configuration = <
+					0x00000012 /* EMC_RC */
+					0x00000066 /* EMC_RFC */
+					0x0000000c /* EMC_RAS */
+					0x00000004 /* EMC_RP */
+					0x00000003 /* EMC_R2W */
+					0x00000008 /* EMC_W2R */
+					0x00000002 /* EMC_R2P */
+					0x0000000a /* EMC_W2P */
+					0x00000004 /* EMC_RD_RCD */
+					0x00000004 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000004 /* EMC_WDV */
+					0x00000006 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000c /* EMC_RDV */
+					0x00000bf0 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000002fc /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000001 /* EMC_PDEX2WR */
+					0x00000008 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000008 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x0000006c /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000010 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000c30 /* EMC_TREFBW */
+					0x00000000 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00007088 /* EMC_FBIO_CFG5 */
+					0x001d0084 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x0003c000 /* EMC_DLL_XFORM_DQS0 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS1 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS2 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS3 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS4 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS5 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS6 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00048000 /* EMC_DLL_XFORM_DQ0 */
+					0x00048000 /* EMC_DLL_XFORM_DQ1 */
+					0x00048000 /* EMC_DLL_XFORM_DQ2 */
+					0x00048000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800013d /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f508 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x080001e8 /* EMC_XM2QUSEPADCTRL */
+					0x08000021 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x0158000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x800018c8 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff89 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-800000000 {
+				clock-frequency = <800000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-reset = <0x80000d71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-configuration = <
+					0x00000025 /* EMC_RC */
+					0x000000ce /* EMC_RFC */
+					0x0000001a /* EMC_RAS */
+					0x00000009 /* EMC_RP */
+					0x00000005 /* EMC_R2W */
+					0x0000000d /* EMC_W2R */
+					0x00000004 /* EMC_R2P */
+					0x00000013 /* EMC_W2P */
+					0x00000009 /* EMC_RD_RCD */
+					0x00000009 /* EMC_WR_RCD */
+					0x00000004 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000007 /* EMC_WDV */
+					0x0000000a /* EMC_QUSE */
+					0x00000009 /* EMC_QRST */
+					0x0000000b /* EMC_QSAFE */
+					0x00000011 /* EMC_RDV */
+					0x00001820 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000608 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000003 /* EMC_PDEX2WR */
+					0x00000012 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x0000000f /* EMC_AR2PDEN */
+					0x00000018 /* EMC_RW2PDEN */
+					0x000000d8 /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000005 /* EMC_TCKE */
+					0x00000020 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000007 /* EMC_TCLKSTABLE */
+					0x00000008 /* EMC_TCLKSTOP */
+					0x00001860 /* EMC_TREFBW */
+					0x0000000b /* EMC_QUSE_EXTRA */
+					0x00000006 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00005088 /* EMC_FBIO_CFG5 */
+					0xf0070191 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x0000800a /* EMC_DLL_XFORM_DQS0 */
+					0x0000000a /* EMC_DLL_XFORM_DQS1 */
+					0x0000000a /* EMC_DLL_XFORM_DQS2 */
+					0x0000000a /* EMC_DLL_XFORM_DQS3 */
+					0x0000000a /* EMC_DLL_XFORM_DQS4 */
+					0x0000000a /* EMC_DLL_XFORM_DQS5 */
+					0x0000000a /* EMC_DLL_XFORM_DQS6 */
+					0x0000000a /* EMC_DLL_XFORM_DQS7 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x0000000a /* EMC_DLL_XFORM_DQ0 */
+					0x0000000a /* EMC_DLL_XFORM_DQ1 */
+					0x0000000a /* EMC_DLL_XFORM_DQ2 */
+					0x0000000a /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0600013d /* EMC_XM2DQSPADCTRL2 */
+					0x22220000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f501 /* EMC_XM2COMPPADCTRL */
+					0x07077404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x080001e8 /* EMC_XM2QUSEPADCTRL */
+					0x08000021 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x00f0000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x8000308c /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff49 /* EMC_CFG_RSV */
+				>;
+			};
+		};
+
+		emc-timings-1 {
+			nvidia,ram-code = <1>;  /* Hynix M RAM */
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-configuration = <
+					0x00000001 /* EMC_RC */
+					0x00000006 /* EMC_RFC */
+					0x00000000 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x000000c0 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000030 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000007 /* EMC_TXSR */
+					0x00000007 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000002 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x000000c7 /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000287 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-configuration = <
+					0x00000002 /* EMC_RC */
+					0x0000000d /* EMC_RFC */
+					0x00000001 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000181 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000060 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x0000000e /* EMC_TXSR */
+					0x0000000e /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000003 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x0000018e /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x8000040b /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-configuration = <
+					0x00000004 /* EMC_RC */
+					0x0000001a /* EMC_RFC */
+					0x00000003 /* EMC_RAS */
+					0x00000001 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000001 /* EMC_RD_RCD */
+					0x00000001 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000303 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000000c0 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x0000001c /* EMC_TXSR */
+					0x0000001c /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x0000031c /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000713 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-configuration = <
+					0x00000009 /* EMC_RC */
+					0x00000035 /* EMC_RFC */
+					0x00000007 /* EMC_RAS */
+					0x00000002 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000002 /* EMC_RD_RCD */
+					0x00000002 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000607 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000181 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000038 /* EMC_TXSR */
+					0x00000038 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000009 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000638 /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000006 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x004400a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00080000 /* EMC_DLL_XFORM_DQS0 */
+					0x00080000 /* EMC_DLL_XFORM_DQS1 */
+					0x00080000 /* EMC_DLL_XFORM_DQS2 */
+					0x00080000 /* EMC_DLL_XFORM_DQS3 */
+					0x00080000 /* EMC_DLL_XFORM_DQS4 */
+					0x00080000 /* EMC_DLL_XFORM_DQS5 */
+					0x00080000 /* EMC_DLL_XFORM_DQS6 */
+					0x00080000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00080000 /* EMC_DLL_XFORM_DQ0 */
+					0x00080000 /* EMC_DLL_XFORM_DQ1 */
+					0x00080000 /* EMC_DLL_XFORM_DQ2 */
+					0x00080000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000d22 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-reset = <0x80000521>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-configuration = <
+					0x00000012 /* EMC_RC */
+					0x00000066 /* EMC_RFC */
+					0x0000000c /* EMC_RAS */
+					0x00000004 /* EMC_RP */
+					0x00000003 /* EMC_R2W */
+					0x00000008 /* EMC_W2R */
+					0x00000002 /* EMC_R2P */
+					0x0000000a /* EMC_W2P */
+					0x00000004 /* EMC_RD_RCD */
+					0x00000004 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000004 /* EMC_WDV */
+					0x00000006 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000c /* EMC_RDV */
+					0x00000bf0 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000002fc /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000001 /* EMC_PDEX2WR */
+					0x00000008 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000008 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x0000006c /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000010 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000c30 /* EMC_TREFBW */
+					0x00000000 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00007088 /* EMC_FBIO_CFG5 */
+					0x001d0084 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x0003c000 /* EMC_DLL_XFORM_DQS0 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS1 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS2 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS3 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS4 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS5 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS6 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00048000 /* EMC_DLL_XFORM_DQ0 */
+					0x00048000 /* EMC_DLL_XFORM_DQ1 */
+					0x00048000 /* EMC_DLL_XFORM_DQ2 */
+					0x00048000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800013d /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f508 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x080001e8 /* EMC_XM2QUSEPADCTRL */
+					0x08000021 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x0158000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x800018c8 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff89 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-800000000 {
+				clock-frequency = <800000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-reset = <0x80000d71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-configuration = <
+					0x00000025 /* EMC_RC */
+					0x000000ce /* EMC_RFC */
+					0x0000001a /* EMC_RAS */
+					0x00000009 /* EMC_RP */
+					0x00000005 /* EMC_R2W */
+					0x0000000d /* EMC_W2R */
+					0x00000004 /* EMC_R2P */
+					0x00000013 /* EMC_W2P */
+					0x00000009 /* EMC_RD_RCD */
+					0x00000009 /* EMC_WR_RCD */
+					0x00000004 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000007 /* EMC_WDV */
+					0x0000000a /* EMC_QUSE */
+					0x00000009 /* EMC_QRST */
+					0x0000000b /* EMC_QSAFE */
+					0x00000011 /* EMC_RDV */
+					0x00001820 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000608 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000003 /* EMC_PDEX2WR */
+					0x00000012 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x0000000f /* EMC_AR2PDEN */
+					0x00000018 /* EMC_RW2PDEN */
+					0x000000d8 /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000005 /* EMC_TCKE */
+					0x00000020 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000007 /* EMC_TCLKSTABLE */
+					0x00000008 /* EMC_TCLKSTOP */
+					0x00001860 /* EMC_TREFBW */
+					0x0000000b /* EMC_QUSE_EXTRA */
+					0x00000006 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00005088 /* EMC_FBIO_CFG5 */
+					0xf0070191 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x0000800a /* EMC_DLL_XFORM_DQS0 */
+					0x0000000a /* EMC_DLL_XFORM_DQS1 */
+					0x0000000a /* EMC_DLL_XFORM_DQS2 */
+					0x0000000a /* EMC_DLL_XFORM_DQS3 */
+					0x0000000a /* EMC_DLL_XFORM_DQS4 */
+					0x0000000a /* EMC_DLL_XFORM_DQS5 */
+					0x0000000a /* EMC_DLL_XFORM_DQS6 */
+					0x0000000a /* EMC_DLL_XFORM_DQS7 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x0000000a /* EMC_DLL_XFORM_DQ0 */
+					0x0000000a /* EMC_DLL_XFORM_DQ1 */
+					0x0000000a /* EMC_DLL_XFORM_DQ2 */
+					0x0000000a /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0600013d /* EMC_XM2DQSPADCTRL2 */
+					0x22220000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f501 /* EMC_XM2COMPPADCTRL */
+					0x07077404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x080001e8 /* EMC_XM2QUSEPADCTRL */
+					0x08000021 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x00f0000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x8000308c /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff49 /* EMC_CFG_RSV */
+				>;
+			};
+		};
+
+		emc-timings-2 {
+			nvidia,ram-code = <2>;  /* Hynix A RAM */
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-configuration = <
+					0x00000001 /* EMC_RC */
+					0x00000007 /* EMC_RFC */
+					0x00000000 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x000000c0 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000030 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000008 /* EMC_TXSR */
+					0x00000008 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000002 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x000000c7 /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000287 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-configuration = <
+					0x00000002 /* EMC_RC */
+					0x0000000f /* EMC_RFC */
+					0x00000001 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000181 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000060 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000010 /* EMC_TXSR */
+					0x00000010 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000003 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x0000018e /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x8000040b /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-configuration = <
+					0x00000004 /* EMC_RC */
+					0x0000001e /* EMC_RFC */
+					0x00000003 /* EMC_RAS */
+					0x00000001 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000001 /* EMC_RD_RCD */
+					0x00000001 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000303 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000000c0 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000020 /* EMC_TXSR */
+					0x00000020 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x0000031c /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000713 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-configuration = <
+					0x00000009 /* EMC_RC */
+					0x0000003d /* EMC_RFC */
+					0x00000007 /* EMC_RAS */
+					0x00000002 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000002 /* EMC_RD_RCD */
+					0x00000002 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000607 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000181 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000040 /* EMC_TXSR */
+					0x00000040 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000009 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000638 /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000006 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x004400a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00080000 /* EMC_DLL_XFORM_DQS0 */
+					0x00080000 /* EMC_DLL_XFORM_DQS1 */
+					0x00080000 /* EMC_DLL_XFORM_DQS2 */
+					0x00080000 /* EMC_DLL_XFORM_DQS3 */
+					0x00080000 /* EMC_DLL_XFORM_DQS4 */
+					0x00080000 /* EMC_DLL_XFORM_DQS5 */
+					0x00080000 /* EMC_DLL_XFORM_DQS6 */
+					0x00080000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00080000 /* EMC_DLL_XFORM_DQ0 */
+					0x00080000 /* EMC_DLL_XFORM_DQ1 */
+					0x00080000 /* EMC_DLL_XFORM_DQ2 */
+					0x00080000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000d22 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-reset = <0x80000521>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-configuration = <
+					0x00000012 /* EMC_RC */
+					0x00000076 /* EMC_RFC */
+					0x0000000c /* EMC_RAS */
+					0x00000004 /* EMC_RP */
+					0x00000003 /* EMC_R2W */
+					0x00000008 /* EMC_W2R */
+					0x00000002 /* EMC_R2P */
+					0x0000000a /* EMC_W2P */
+					0x00000004 /* EMC_RD_RCD */
+					0x00000004 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000004 /* EMC_WDV */
+					0x00000006 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000c /* EMC_RDV */
+					0x00000bf0 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000002fc /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000001 /* EMC_PDEX2WR */
+					0x00000008 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000008 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x0000007c /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000010 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000c30 /* EMC_TREFBW */
+					0x00000000 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00007088 /* EMC_FBIO_CFG5 */
+					0x001d0084 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00044000 /* EMC_DLL_XFORM_DQS0 */
+					0x00044000 /* EMC_DLL_XFORM_DQS1 */
+					0x00044000 /* EMC_DLL_XFORM_DQS2 */
+					0x00044000 /* EMC_DLL_XFORM_DQS3 */
+					0x00044000 /* EMC_DLL_XFORM_DQS4 */
+					0x00044000 /* EMC_DLL_XFORM_DQS5 */
+					0x00044000 /* EMC_DLL_XFORM_DQS6 */
+					0x00044000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00058000 /* EMC_DLL_XFORM_DQ0 */
+					0x00058000 /* EMC_DLL_XFORM_DQ1 */
+					0x00058000 /* EMC_DLL_XFORM_DQ2 */
+					0x00058000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800013d /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f508 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x080001e8 /* EMC_XM2QUSEPADCTRL */
+					0x08000021 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x0148000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x800018c8 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff89 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-800000000 {
+				clock-frequency = <800000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-reset = <0x80000d71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-configuration = <
+					0x00000025 /* EMC_RC */
+					0x000000ee /* EMC_RFC */
+					0x0000001a /* EMC_RAS */
+					0x00000009 /* EMC_RP */
+					0x00000005 /* EMC_R2W */
+					0x0000000d /* EMC_W2R */
+					0x00000004 /* EMC_R2P */
+					0x00000013 /* EMC_W2P */
+					0x00000009 /* EMC_RD_RCD */
+					0x00000009 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000007 /* EMC_WDV */
+					0x0000000a /* EMC_QUSE */
+					0x00000009 /* EMC_QRST */
+					0x0000000b /* EMC_QSAFE */
+					0x00000011 /* EMC_RDV */
+					0x00001820 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000608 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000003 /* EMC_PDEX2WR */
+					0x00000012 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x0000000f /* EMC_AR2PDEN */
+					0x00000018 /* EMC_RW2PDEN */
+					0x000000f8 /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000005 /* EMC_TCKE */
+					0x00000020 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000007 /* EMC_TCLKSTABLE */
+					0x00000008 /* EMC_TCLKSTOP */
+					0x00001860 /* EMC_TREFBW */
+					0x0000000b /* EMC_QUSE_EXTRA */
+					0x00000006 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00005088 /* EMC_FBIO_CFG5 */
+					0xf0070191 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x0000000c /* EMC_DLL_XFORM_DQS0 */
+					0x007fc00a /* EMC_DLL_XFORM_DQS1 */
+					0x00000008 /* EMC_DLL_XFORM_DQS2 */
+					0x0000000a /* EMC_DLL_XFORM_DQS3 */
+					0x0000000a /* EMC_DLL_XFORM_DQS4 */
+					0x0000000a /* EMC_DLL_XFORM_DQS5 */
+					0x0000000a /* EMC_DLL_XFORM_DQS6 */
+					0x0000000a /* EMC_DLL_XFORM_DQS7 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x0000000a /* EMC_DLL_XFORM_DQ0 */
+					0x0000000c /* EMC_DLL_XFORM_DQ1 */
+					0x0000000a /* EMC_DLL_XFORM_DQ2 */
+					0x0000000a /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0600013d /* EMC_XM2DQSPADCTRL2 */
+					0x22220000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f501 /* EMC_XM2COMPPADCTRL */
+					0x07077404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x080001e8 /* EMC_XM2QUSEPADCTRL */
+					0x0a000021 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x00d0000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x8000308c /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff49 /* EMC_CFG_RSV */
+				>;
+			};
+		};
+	};
+
+	hda@70030000 {
+		status = "okay";
+	};
+
+	sdmmc3: mmc@78000400 {
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_SDMMC3>;
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_C>;
+		assigned-clock-rates = <50000000>;
+
+		max-frequency = <50000000>;
+		keep-power-in-suspend;
+
+		bus-width = <4>;
+		non-removable;
+
+		mmc-pwrseq = <&wifi_pwrseq>;
+		vmmc-supply = <&sdmmc_3v3_reg>;
+		vqmmc-supply = <&vdd_1v8>;
+
+		/* Azurewave AW-NH660 BCM4330 */
+		brcmf: wifi@1 {
+			reg = <1>;
+			compatible = "brcm,bcm4329-fmac";
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host-wake";
+		};
+	};
+
+	sdmmc4: mmc@78000600 {
+		status = "okay";
+
+		keep-power-in-suspend;
+		bus-width = <8>;
+		non-removable;
+		vmmc-supply = <&sys_3v3_reg>;
+		vqmmc-supply = <&vdd_1v8>;
+		nvidia,default-tap = <0x0F>;
+		max-frequency = <25500000>;
+	};
+
+	usb@7d000000 {
+		compatible = "nvidia,tegra30-udc";
+		status = "okay";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		dr_mode = "peripheral";
+	};
+
+	usb@7d004000 {
+		status = "okay";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethernet@2 { /* SMSC 10/100T Ethernet Controller */
+			compatible = "usb424,9e00";
+			reg = <2>;
+			local-mac-address = [00 11 22 33 44 55];
+		};
+	};
+
+	usb-phy@7d004000 {
+		vbus-supply = <&vdd_smsc>;
+		status = "okay";
+	};
+
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		vbus-supply = <&usb3_vbus_reg>;
+		status = "okay";
+	};
+
+	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
+	clk32k_in: clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "pmic-oscillator";
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			operating-points-v2 = <&cpu0_opp_table>;
+			cpu-supply = <&vdd_cpu>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			operating-points-v2 = <&cpu0_opp_table>;
+			cpu-supply = <&vdd_cpu>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			operating-points-v2 = <&cpu0_opp_table>;
+			cpu-supply = <&vdd_cpu>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			operating-points-v2 = <&cpu0_opp_table>;
+			cpu-supply = <&vdd_cpu>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	fan: fan {
+		compatible = "gpio-fan";
+		gpios = <&gpio TEGRA_GPIO(J, 2) GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <0    0
+				      4500 1>;
+		#cooling-cells = <2>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
+			debounce-interval = <10>;
+			linux,code = <KEY_POWER>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			label = "power-led";
+			gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+			retain-state-suspended;
+		};
+	};
+
+	opp-table-actmon {
+		/delete-node/ opp-900000000;
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-900000000-1350;
+	};
+
+	wifi_pwrseq: pwrseq-wifi {
+		compatible = "mmc-pwrseq-simple";
+
+		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+		clock-names = "ext_clock";
+
+		reset-gpios = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <300>;
+		power-off-delay-us = <300>;
+	};
+
+	vdd_12v_in: regulator-vdd-12v-in {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_12v_in";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	sdmmc_3v3_reg: regulator-sdmmc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "sdmmc_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		regulator-always-on;
+		gpio = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		vin-supply = <&sys_3v3_reg>;
+	};
+
+	vdd_fuse_3v3_reg: regulator-vdd-fuse-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_fuse_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(L, 6) GPIO_ACTIVE_HIGH>;
+		vin-supply = <&sys_3v3_reg>;
+		regulator-always-on;
+	};
+
+	vdd_vid_reg: regulator-vdd-vid {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio_vid";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(T, 0) GPIO_ACTIVE_HIGH>;
+		vin-supply = <&vdd_5v0_reg>;
+		regulator-boot-on;
+	};
+
+	ddr_reg: regulator-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_ddr";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		enable-active-high;
+		gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+		vin-supply = <&vdd_12v_in>;
+	};
+
+	sys_3v3_reg: regulator-sys-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "sys_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_12v_in>;
+	};
+
+	vdd_5v0_reg: regulator-vdd-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_12v_in>;
+	};
+
+	vdd_smsc: regulator-vdd-smsc {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_smsc";
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(DD, 5) GPIO_ACTIVE_HIGH>;
+	};
+
+	usb3_vbus_reg: regulator-usb3-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>;
+		vin-supply = <&vdd_5v0_reg>;
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay = <5000>;
+			polling-delay-passive = <5000>;
+
+			thermal-sensors = <&cpu_temp 1>;
+
+			trips {
+				cpu_alert0: cpu-alert0 {
+					temperature = <50000>;
+					hysteresis = <10000>;
+					type = "active";
+				};
+				cpu_alert1: cpu-alert1 {
+					temperature = <70000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+				cpu_crit: cpu-crit {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_alert1>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT
+								  THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-pegatron-chagall.dts b/arch/arm/boot/dts/nvidia/tegra30-pegatron-chagall.dts
new file mode 100644
index 000000000000..b7d0ebb766a6
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-pegatron-chagall.dts
@@ -0,0 +1,2876 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "tegra30.dtsi"
+#include "tegra30-cpu-opp.dtsi"
+#include "tegra30-cpu-opp-microvolt.dtsi"
+#include "tegra30-asus-lvds-display.dtsi"
+
+/ {
+	model = "Pegatron Chagall";
+	compatible = "pegatron,chagall", "nvidia,tegra30";
+	chassis-type = "tablet";
+
+	aliases {
+		mmc0 = &sdmmc4; /* eMMC */
+		mmc1 = &sdmmc1; /* uSD slot */
+		mmc2 = &sdmmc3; /* WiFi */
+
+		rtc0 = &pmic;
+		rtc1 = "/rtc@7000e000";
+
+		display0 = &lcd;
+		display1 = &hdmi;
+
+		serial1 = &uartc; /* Bluetooth */
+		serial2 = &uartb; /* GPS */
+	};
+
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	firmware {
+		trusted-foundations {
+			compatible = "tlm,trusted-foundations";
+			tlm,version-major = <2>;
+			tlm,version-minor = <8>;
+		};
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		linux,cma@80000000 {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0x80000000 0x30000000>;
+			size = <0x10000000>; /* 256MiB */
+			linux,cma-default;
+			reusable;
+		};
+
+		ramoops@beb00000 {
+			compatible = "ramoops";
+			reg = <0xbeb00000 0x10000>; /* 64kB */
+			console-size = <0x8000>; /* 32kB */
+			record-size = <0x400>; /* 1kB */
+			ecc-size = <16>;
+		};
+
+		trustzone@bfe00000 {
+			reg = <0xbfe00000 0x200000>; /* 2MB */
+			no-map;
+		};
+	};
+
+	host1x@50000000 {
+		hdmi: hdmi@54280000 {
+			status = "okay";
+
+			hdmi-supply = <&hdmi_5v0_sys>;
+			pll-supply = <&vdd_1v8_vio>;
+			vdd-supply = <&vdd_3v3_sys>;
+
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+		};
+	};
+
+	vde@6001a000 {
+		assigned-clocks = <&tegra_car TEGRA30_CLK_VDE>;
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_P>;
+		assigned-clock-rates = <408000000>;
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* SDMMC1 pinmux */
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc1_dat3_py4 {
+				nvidia,pins = "sdmmc1_dat3_py4",
+						"sdmmc1_dat2_py5",
+						"sdmmc1_dat1_py6",
+						"sdmmc1_dat0_py7",
+						"sdmmc1_cmd_pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* SDMMC2 pinmux */
+			vi_d1_pd5 {
+				nvidia,pins = "vi_d1_pd5",
+						"vi_d2_pl0",
+						"vi_d3_pl1",
+						"vi_d5_pl3",
+						"vi_d7_pl5";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vi_d8_pl6 {
+				nvidia,pins = "vi_d8_pl6",
+						"vi_d9_pl7";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+				nvidia,io-reset = <0>;
+			};
+
+			/* SDMMC3 pinmux */
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc3_cmd_pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+						"sdmmc3_dat3_pb4",
+						"sdmmc3_dat2_pb5",
+						"sdmmc3_dat1_pb6",
+						"sdmmc3_dat0_pb7",
+						"sdmmc3_dat5_pd0",
+						"sdmmc3_dat4_pd1",
+						"sdmmc3_dat6_pd3",
+						"sdmmc3_dat7_pd4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* SDMMC4 pinmux */
+			sdmmc4_clk_pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc4_cmd_pt7 {
+				nvidia,pins = "sdmmc4_cmd_pt7",
+						"sdmmc4_dat0_paa0",
+						"sdmmc4_dat1_paa1",
+						"sdmmc4_dat2_paa2",
+						"sdmmc4_dat3_paa3",
+						"sdmmc4_dat4_paa4",
+						"sdmmc4_dat5_paa5",
+						"sdmmc4_dat6_paa6",
+						"sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* I2C pinmux */
+			gen1_i2c_scl_pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4",
+						"gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+
+			gen2_i2c_scl_pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5",
+						"gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+
+			cam_i2c_scl_pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+						"cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+
+			ddc_scl_pv4 {
+				nvidia,pins = "ddc_scl_pv4",
+						"ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+
+			pwr_i2c_scl_pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+						"pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+
+			/* HDMI-CEC pinmux */
+			hdmi_cec_pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+
+			/* UART-A */
+			ulpi_data0_po1 {
+				nvidia,pins = "ulpi_data0_po1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ulpi_data1_po2 {
+				nvidia,pins = "ulpi_data1_po2",
+						"ulpi_data2_po3",
+						"ulpi_data3_po4",
+						"ulpi_data4_po5",
+						"ulpi_data5_po6",
+						"ulpi_data6_po7";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ulpi_data7_po0 {
+				nvidia,pins = "ulpi_data7_po0";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* UART-B */
+			uart2_txd_pc2 {
+				nvidia,pins = "uart2_txd_pc2",
+						"uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			uart2_rxd_pc3 {
+				nvidia,pins = "uart2_rxd_pc3",
+						"uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* UART-C */
+			uart3_cts_n_pa1 {
+				nvidia,pins = "uart3_cts_n_pa1",
+						"uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			uart3_rts_n_pc0 {
+				nvidia,pins = "uart3_rts_n_pc0",
+						"uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* UART-D */
+			ulpi_clk_py0 {
+				nvidia,pins = "ulpi_clk_py0",
+						"ulpi_stp_py3";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ulpi_dir_py1 {
+				nvidia,pins = "ulpi_dir_py1",
+						"ulpi_nxt_py2";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* I2S pinmux */
+			dap1_fs_pn0 {
+				nvidia,pins = "dap1_fs_pn0",
+						"dap1_din_pn1",
+						"dap1_dout_pn2",
+						"dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap2_fs_pa2 {
+				nvidia,pins = "dap2_fs_pa2",
+						"dap2_sclk_pa3",
+						"dap2_din_pa4",
+						"dap2_dout_pa5";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap3_fs_pp0 {
+				nvidia,pins = "dap3_fs_pp0",
+						"dap3_din_pp1",
+						"dap3_dout_pp2",
+						"dap3_sclk_pp3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap4_fs_pp4 {
+				nvidia,pins = "dap4_fs_pp4",
+						"dap4_din_pp5",
+						"dap4_dout_pp6",
+						"dap4_sclk_pp7";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pcc2 {
+				nvidia,pins = "pcc2";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* PCI-e pinmux */
+			pex_l2_rst_n_pcc6 {
+				nvidia,pins = "pex_l2_rst_n_pcc6",
+						"pex_l0_rst_n_pdd1",
+						"pex_l1_rst_n_pdd5";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pex_l2_clkreq_n_pcc7 {
+				nvidia,pins = "pex_l2_clkreq_n_pcc7",
+						"pex_l0_prsnt_n_pdd0",
+						"pex_l0_clkreq_n_pdd2",
+						"pex_l2_prsnt_n_pdd7";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pex_wake_n_pdd3 {
+				nvidia,pins = "pex_wake_n_pdd3";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* SPI pinmux */
+			spi1_mosi_px4 {
+				nvidia,pins = "spi1_mosi_px4",
+						"spi1_sck_px5",
+						"spi1_cs0_n_px6",
+						"spi1_miso_px7";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			spi2_cs1_n_pw2 {
+				nvidia,pins = "spi2_cs1_n_pw2",
+						"spi2_cs2_n_pw3";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			spi2_sck_px2 {
+				nvidia,pins = "spi2_sck_px2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_a16_pj7 {
+				nvidia,pins = "gmi_a16_pj7",
+						"gmi_a19_pk7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_a17_pb0 {
+				nvidia,pins = "gmi_a17_pb0",
+						"gmi_a18_pb1";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spi2_mosi_px0 {
+				nvidia,pins = "spi2_mosi_px0";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spdif_out_pk5 {
+				nvidia,pins = "spdif_out_pk5";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spdif_in_pk6 {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Display A pinmux */
+			lcd_pwr0_pb2 {
+				nvidia,pins = "lcd_pwr0_pb2",
+						"lcd_pclk_pb3",
+						"lcd_pwr1_pc1",
+						"lcd_pwr2_pc6",
+						"lcd_d0_pe0",
+						"lcd_d1_pe1",
+						"lcd_d2_pe2",
+						"lcd_d3_pe3",
+						"lcd_d4_pe4",
+						"lcd_d5_pe5",
+						"lcd_d6_pe6",
+						"lcd_d7_pe7",
+						"lcd_d8_pf0",
+						"lcd_d9_pf1",
+						"lcd_d10_pf2",
+						"lcd_d11_pf3",
+						"lcd_d12_pf4",
+						"lcd_d13_pf5",
+						"lcd_d14_pf6",
+						"lcd_d15_pf7",
+						"lcd_de_pj1",
+						"lcd_hsync_pj3",
+						"lcd_vsync_pj4",
+						"lcd_d16_pm0",
+						"lcd_d17_pm1",
+						"lcd_d18_pm2",
+						"lcd_d19_pm3",
+						"lcd_d20_pm4",
+						"lcd_d21_pm5",
+						"lcd_d22_pm6",
+						"lcd_d23_pm7",
+						"lcd_cs0_n_pn4",
+						"lcd_sdout_pn5",
+						"lcd_dc0_pn6",
+						"lcd_sdin_pz2",
+						"lcd_wr_n_pz3",
+						"lcd_sck_pz4",
+						"lcd_cs1_n_pw0",
+						"lcd_m1_pw1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			lcd_dc1_pd2 {
+				nvidia,pins = "lcd_dc1_pd2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk_32k_out_pa0 {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,function = "blink";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* KBC keys */
+			kb_row0_pr0 {
+				nvidia,pins = "kb_row0_pr0",
+						"kb_row1_pr1",
+						"kb_row2_pr2",
+						"kb_row3_pr3",
+						"kb_row8_ps0",
+						"kb_col0_pq0",
+						"kb_col1_pq1",
+						"kb_col2_pq2",
+						"kb_col3_pq3",
+						"kb_col4_pq4",
+						"kb_col5_pq5",
+						"kb_col7_pq7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kb_row4_pr4 {
+				nvidia,pins = "kb_row4_pr4",
+						"kb_row7_pr7",
+						"kb_row10_ps2",
+						"kb_row13_ps5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kb_row11_ps3 {
+				nvidia,pins = "kb_row11_ps3",
+						"kb_row12_ps4",
+						"kb_row15_ps7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kb_row14_ps6 {
+				nvidia,pins = "kb_row14_ps6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_iordy_pi5 {
+				nvidia,pins = "gmi_iordy_pi5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vi_pclk_pt0 {
+				nvidia,pins = "vi_pclk_pt0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+				nvidia,io-reset = <0>;
+			};
+
+			pu1 {
+				nvidia,pins = "pu1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pu2 {
+				nvidia,pins = "pu2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pv0 {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pv1 {
+				nvidia,pins = "pv1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pcc1 {
+				nvidia,pins = "pcc1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc4_rst_n_pcc3 {
+				nvidia,pins = "sdmmc4_rst_n_pcc3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pv3 {
+				nvidia,pins = "pv3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_vsync_pd6 {
+				nvidia,pins = "vi_vsync_pd6",
+						"vi_hsync_pd7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+				nvidia,io-reset = <0>;
+			};
+
+			vi_d10_pt2 {
+				nvidia,pins = "vi_d10_pt2",
+						"vi_d0_pt4", "pbb0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vi_d11_pt3 {
+				nvidia,pins = "vi_d11_pt3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pu0 {
+				nvidia,pins = "pu0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pu6 {
+				nvidia,pins = "pu6";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pex_l1_prsnt_n_pdd4 {
+				nvidia,pins = "pex_l1_prsnt_n_pdd4",
+						"pex_l1_clkreq_n_pdd6";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_wait_pi7 {
+				nvidia,pins = "gmi_wait_pi7",
+						"gmi_cs0_n_pj0",
+						"gmi_cs1_n_pj2",
+						"gmi_cs4_n_pk2";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad0_pg0 {
+				nvidia,pins = "gmi_ad0_pg0",
+						"gmi_ad1_pg1",
+						"gmi_ad2_pg2",
+						"gmi_ad3_pg3",
+						"gmi_ad4_pg4",
+						"gmi_ad5_pg5",
+						"gmi_ad6_pg6",
+						"gmi_ad7_pg7",
+						"gmi_wr_n_pi0",
+						"gmi_oe_n_pi1",
+						"gmi_dqs_pi2",
+						"gmi_adv_n_pk0",
+						"gmi_clk_pk1";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_cs2_n_pk3 {
+				nvidia,pins = "gmi_cs2_n_pk3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_cs3_n_pk4 {
+				nvidia,pins = "gmi_cs3_n_pk4";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad10_ph2 {
+				nvidia,pins = "gmi_ad10_ph2",
+						"gmi_ad11_ph3",
+						"gmi_ad14_ph6";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad13_ph5 {
+				nvidia,pins = "gmi_ad13_ph5",
+						"gmi_ad12_ph4",
+						"gmi_cs7_n_pi6";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_rst_n_pi4 {
+				nvidia,pins = "gmi_rst_n_pi4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_ad8_ph0 {
+				nvidia,pins = "gmi_ad8_ph0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad9_ph1 {
+				nvidia,pins = "gmi_ad9_ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_wp_n_pc7 {
+				nvidia,pins = "gmi_wp_n_pc7";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_cs6_n_pi3 {
+				nvidia,pins = "gmi_cs6_n_pi3";
+				nvidia,function = "sata";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d4_pl2 {
+				nvidia,pins = "vi_d4_pl2";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d6_pl4 {
+				nvidia,pins = "vi_d6_pl4";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <0>;
+				nvidia,io-reset = <0>;
+			};
+
+			vi_mclk_pt1 {
+				nvidia,pins = "vi_mclk_pt1";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* HDMI hot-plug-detect */
+			hdmi_int_pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "hdmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pu4 {
+				nvidia,pins = "pu4";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pu5 {
+				nvidia,pins = "pu5";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			jtag_rtck_pu7 {
+				nvidia,pins = "jtag_rtck_pu7";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			crt_hsync_pv6 {
+				nvidia,pins = "crt_hsync_pv6",
+						"crt_vsync_pv7";
+				nvidia,function = "crt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk1_out_pw4 {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk2_out_pw5 {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "extperiph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk3_out_pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sys_clk_req_pz5 {
+				nvidia,pins = "sys_clk_req_pz5";
+				nvidia,function = "sysclk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb4 {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pbb5 {
+				nvidia,pins = "pbb5";
+				nvidia,function = "vgp5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pbb6 {
+				nvidia,pins = "pbb6";
+				nvidia,function = "vgp6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk1_req_pee2 {
+				nvidia,pins = "clk1_req_pee2";
+				nvidia,function = "dap";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk2_req_pcc5 {
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "dap";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk3_req_pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "dev3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pv2 {
+				nvidia,pins = "pv2",
+						"kb_row5_pr5";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pbb7 {
+				nvidia,pins = "pbb7";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			cam_mclk_pcc0 {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* GPIO power/drive control */
+			drive_dap1 {
+				nvidia,pins = "drive_dap1",
+						"drive_dap2",
+						"drive_dbg",
+						"drive_at5",
+						"drive_gme",
+						"drive_ddc",
+						"drive_ao1",
+						"drive_uart3";
+				nvidia,high-speed-mode = <0>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+
+			drive_sdio1 {
+				nvidia,pins = "drive_sdio1";
+				nvidia,high-speed-mode = <0>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <5>;
+				nvidia,pull-up-strength = <5>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FAST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FAST>;
+			};
+
+			drive_sdio3 {
+				nvidia,pins = "drive_sdio3";
+				nvidia,high-speed-mode = <0>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <46>;
+				nvidia,pull-up-strength = <42>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FAST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FAST>;
+			};
+
+			drive_gma {
+				nvidia,pins = "drive_gma",
+						"drive_gmb",
+						"drive_gmc",
+						"drive_gmd";
+				nvidia,pull-down-strength = <9>;
+				nvidia,pull-up-strength = <9>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+
+			drive_lcd2 {
+				nvidia,pins = "drive_lcd2";
+				nvidia,high-speed-mode = <0>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_4>;
+				nvidia,pull-down-strength = <20>;
+				nvidia,pull-up-strength = <20>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+		};
+	};
+
+	uartb: serial@70006040 {
+		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
+		status = "okay";
+
+		/* Broadcom GPS BCM47511 */
+	};
+
+	uartc: serial@70006200 {
+		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
+		status = "okay";
+
+		nvidia,adjust-baud-rates = <0 9600 100>,
+					   <9600 115200 200>,
+					   <1000000 4000000 136>;
+
+		/* Azurewave AW-AH663 BCM4330B1 */
+		bluetooth {
+			compatible = "brcm,bcm4330-bt";
+			max-speed = <4000000>;
+
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+			clock-names = "txco";
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "host-wakeup";
+
+			device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
+			shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
+
+			vbat-supply  = <&vdd_3v3_sys>;
+			vddio-supply = <&vdd_1v8_vio>;
+		};
+	};
+
+	pwm: pwm@7000a000 {
+		status = "okay";
+	};
+
+	lcd_ddc: i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		embedded-controller@10 {
+			compatible = "pegatron,chagall-ec";
+			reg = <0x10>;
+
+			monitored-battery = <&battery>;
+			power-supplies = <&mains>;
+		};
+
+		/* Wolfson Microelectronics WM8903 audio codec */
+		wm8903: audio-codec@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_BOTH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0>;
+			micdet-delay = <100>;
+
+			gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
+
+			AVDD-supply  = <&vdd_1v8_vio>;
+			CPVDD-supply = <&vdd_1v8_vio>;
+			DBVDD-supply = <&vdd_1v8_vio>;
+			DCVDD-supply = <&vdd_1v8_vio>;
+		};
+	};
+
+	i2c2: i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* Atmel touchscreen */
+		touchscreen@4d {
+			compatible = "atmel,maxtouch";
+			reg = <0x4d>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&gpio TEGRA_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+
+			vdda-supply = <&vdd_3v3_sys>;
+			vdd-supply  = <&vdd_3v3_sys>;
+		};
+	};
+
+	i2c3: i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* AsahiKASEI AK8975 magnetometer sensor */
+		magnetometer@c {
+			compatible = "asahi-kasei,ak8975";
+			reg = <0x0c>;
+
+			vdd-supply = <&vdd_3v3_sen>;
+			vid-supply = <&vdd_1v8_vio>;
+
+			mount-matrix =   "0",  "1",  "0",
+					 "1",  "0",  "0",
+					 "0",  "0", "-1";
+		};
+
+		light-sensor@44 {
+			compatible = "isil,isl29023";
+			reg = <0x44>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(Q, 3) IRQ_TYPE_LEVEL_HIGH>;
+
+			vcc-supply = <&vdd_3v3_sen>;
+		};
+
+		gyroscope@68 {
+			compatible = "invensense,mpu3050";
+			reg = <0x68>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 1) IRQ_TYPE_EDGE_RISING>;
+
+			vdd-supply = <&vdd_3v3_sen>;
+			vlogic-supply = <&vdd_1v8_vio>;
+
+			mount-matrix =   "0",  "1",  "0",
+					 "1",  "0",  "0",
+					 "0",  "0", "-1";
+
+			/* External I2C interface */
+			i2c-gate {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				accelerometer@f {
+					compatible = "kionix,kxtf9";
+					reg = <0x0f>;
+
+					interrupt-parent = <&gpio>;
+					interrupts = <TEGRA_GPIO(L, 1) IRQ_TYPE_EDGE_RISING>;
+
+					vdd-supply = <&vdd_1v8_vio>;
+					vddio-supply = <&vdd_1v8_vio>;
+
+					mount-matrix =  "-1",  "0",  "0",
+							 "0",  "1",  "0",
+							 "0",  "0",  "1";
+				};
+			};
+		};
+	};
+
+	hdmi_ddc: i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <93750>;
+	};
+
+	i2c5: i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* Texas Instruments TPS659110 PMIC */
+		pmic: pmic@2d {
+			compatible = "ti,tps65911";
+			reg = <0x2d>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			wakeup-source;
+
+			ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>;
+			ti,system-power-controller;
+			ti,sleep-keep-ck32k;
+			ti,sleep-enable;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			vcc1-supply = <&vdd_5v0_sys>;
+			vcc2-supply = <&vdd_5v0_sys>;
+			vcc3-supply = <&vdd_1v8_vio>;
+			vcc4-supply = <&vdd_1v8_vio>;
+			vcc5-supply = <&vdd_5v0_sys>;
+			vcc6-supply = <&vddio_1v2_ddr>;
+			vcc7-supply = <&vdd_5v0_sys>;
+			vccio-supply = <&vdd_5v0_sys>;
+
+			pmic-sleep-hog {
+				gpio-hog;
+				gpios = <0 GPIO_ACTIVE_HIGH>,
+					<2 GPIO_ACTIVE_HIGH>,
+					<6 GPIO_ACTIVE_HIGH>,
+					<8 GPIO_ACTIVE_HIGH>;
+				output-high;
+			};
+
+			regulators {
+				/* VDD1 is not used by Chagall */
+
+				vddio_1v2_ddr: vdd2 {
+					regulator-name = "vddio_1v2_ddr";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_cpu: vddctrl {
+					regulator-name = "vdd_cpu,vdd_sys";
+					regulator-min-microvolt = <600000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-coupled-with = <&vdd_core>;
+					regulator-coupled-max-spread = <300000>;
+					regulator-max-step-microvolt = <100000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ti,regulator-ext-sleep-control = <1>;
+
+					nvidia,tegra-cpu-regulator;
+				};
+
+				vdd_1v8_vio: vio {
+					regulator-name = "vdd_1v8_gen";
+					/* FIXME: eMMC won't work, if set to 1.8 V */
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				/* eMMC VDD */
+				vcore_emmc: ldo1 {
+					regulator-name = "vdd_emmc_core";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				/* uSD slot VDD */
+				vdd_usd: ldo2 {
+					regulator-name = "vdd_usd";
+					regulator-min-microvolt = <3200000>;
+					regulator-max-microvolt = <3200000>;
+				};
+
+				/* uSD slot VDDIO */
+				vddio_usd: ldo3 {
+					regulator-name = "vddio_usd";
+					regulator-min-microvolt = <1900000>;
+					regulator-max-microvolt = <3200000>;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo5 {
+					regulator-name = "vdd_1v3_cam_isp";
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1300000>;
+				};
+
+				ldo6 {
+					regulator-name = "avdd_dsi_csi,pwrdet_mipi";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo7 {
+					regulator-name = "vdd_pllm,x,u,a_p_c_s";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ti,regulator-ext-sleep-control = <8>;
+				};
+
+				ldo8 {
+					regulator-name = "vdd_ddr_hs";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					ti,regulator-ext-sleep-control = <8>;
+				};
+			};
+		};
+
+		nct72: temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(U, 5) IRQ_TYPE_EDGE_FALLING>;
+
+			vcc-supply = <&vdd_3v3_sys>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		vdd_core: core-regulator@60 {
+			compatible = "ti,tps62361";
+			reg = <0x60>;
+
+			regulator-name = "tps62361-vout";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1770000>;
+			regulator-coupled-with = <&vdd_cpu>;
+			regulator-coupled-max-spread = <300000>;
+			regulator-max-step-microvolt = <100000>;
+			regulator-boot-on;
+			regulator-always-on;
+			ti,enable-vout-discharge;
+			ti,vsel0-state-high;
+			ti,vsel1-state-high;
+
+			nvidia,tegra-core-regulator;
+		};
+	};
+
+	vdd_5v0_sys: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_3v3_sys: regulator-3v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_pnl: regulator-panel {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_panel";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-enable-ramp-delay = <300000>;
+		gpio = <&gpio TEGRA_GPIO(W, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_3v3_sen: regulator-sensors {
+		compatible = "regulator-fixed";
+		regulator-name = "sen_3v3_en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio TEGRA_GPIO(K, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_5v0_bl: regulator-bl {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_bl";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	hdmi_5v0_sys: regulator-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "hdmi_5v0_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_vbus_usb1: regulator-usb1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_vbus_micro_usb";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(DD, 3) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_vbus_usb3: regulator-usb3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_vbus_typea_usb";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(CC, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	pmc@7000e400 {
+		status = "okay";
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <2>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <200>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <0>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
+
+		/* Set DEV_OFF + PWR_OFF_SET bit in DCDC control register of TPS65911 PMIC  */
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <4>;
+			nvidia,bus-addr = <0x2d>;
+			nvidia,reg-addr = <0x3f>;
+			nvidia,reg-data = <0x81>;
+		};
+	};
+
+	memory-controller@7000f000 {
+		emc-timings-0 {
+			/* SAMSUNG K4P8G304EB FGC1 */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x73e30303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x72c30303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000018
+					0x00000001 0x00000001 0x00000003 0x00000001
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060403 0x72430504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000006 0x00000003
+					0x00000005 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000003 0x00000002
+					0x02030001 0x00070506 0x71e40a07 0x001f0000 >;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+
+				nvidia,emem-configuration = < 0x00000006 0xc0000048
+					0x00000002 0x00000003 0x0000000c 0x00000007
+					0x00000009 0x00000001 0x00000002 0x00000006
+					0x00000001 0x00000000 0x00000004 0x00000004
+					0x04040001 0x000d090c 0x7026120d 0x001f0000 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* ELPIDA EDB8132B2MA 8D_F */
+			nvidia,ram-code = <1>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x73e30303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x72c30303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000018
+					0x00000001 0x00000001 0x00000003 0x00000001
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060403 0x72430504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000006 0x00000003
+					0x00000005 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000003 0x00000002
+					0x02030001 0x00070506 0x71e40a07 0x001f0000 >;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+
+				nvidia,emem-configuration = < 0x00000006 0xc0000048
+					0x00000002 0x00000003 0x0000000c 0x00000007
+					0x00000009 0x00000001 0x00000002 0x00000006
+					0x00000001 0x00000000 0x00000004 0x00000004
+					0x04040001 0x000d090c 0x7026120d 0x001f0000 >;
+			};
+		};
+
+		emc-timings-2 {
+			/* SAMSUNG K4P8G304EB FGC2 */
+			nvidia,ram-code = <2>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x73e30303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x72c30303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000018
+					0x00000001 0x00000001 0x00000003 0x00000001
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060403 0x72430504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000006 0x00000003
+					0x00000005 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000003 0x00000002
+					0x02030001 0x00070506 0x71e40a07 0x001f0000 >;
+			};
+
+			timing-533000000 {
+				clock-frequency = <533000000>;
+
+				nvidia,emem-configuration = < 0x00000008 0xc0000060
+					0x00000003 0x00000004 0x00000010 0x0000000a
+					0x0000000d 0x00000002 0x00000002 0x00000008
+					0x00000002 0x00000000 0x00000004 0x00000005
+					0x05040002 0x00110b10 0x70281811 0x001f0000 >;
+			};
+		};
+
+		emc-timings-3 {
+			/* HYNIX H9TCNNN8JDMMPR NGM */
+			nvidia,ram-code = <3>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x73e30303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x72c30303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000018
+					0x00000001 0x00000001 0x00000003 0x00000001
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060403 0x72430504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000006 0x00000003
+					0x00000005 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000003 0x00000002
+					0x02030001 0x00070506 0x71e40a07 0x001f0000 >;
+			};
+
+			timing-533000000 {
+				clock-frequency = <533000000>;
+
+				nvidia,emem-configuration = < 0x00000008 0xc0000060
+					0x00000003 0x00000004 0x00000010 0x0000000a
+					0x0000000d 0x00000002 0x00000002 0x00000008
+					0x00000002 0x00000000 0x00000004 0x00000005
+					0x05040002 0x00110b10 0x70281811 0x001f0000 >;
+			};
+		};
+	};
+
+	memory-controller@7000f400 {
+		emc-timings-0 {
+			/* SAMSUNG K4P8G304EB FGC1 */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000003 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x00000060 0x00000000 0x00000018
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000004 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x0000006b 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000000a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x800001c5 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000003
+					0x00000006 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x000000c0 0x00000000 0x00000030
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000008 0x00000008
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000000d5 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000013 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x0000000a>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000006
+					0x0000000d 0x00000004 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x00000181 0x00000000 0x00000060
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x0000000f 0x0000000f
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000001a9 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000025 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010042>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000013>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000c
+					0x0000001a 0x00000008 0x00000003 0x00000005
+					0x00000004 0x00000001 0x00000006 0x00000003
+					0x00000003 0x00000002 0x00000002 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000c
+					0x0000000a 0x00000303 0x00000000 0x000000c0
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000007 0x0000001d 0x0000001d
+					0x00000004 0x0000000b 0x00000005 0x00000004
+					0x00000002 0x00000351 0x00000004 0x00000006
+					0x00000000 0x00000000 0x00004282 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000e0220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000004a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010082>;
+				nvidia,emc-mode-2 = <0x00020004>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000024>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000017
+					0x00000033 0x00000010 0x00000007 0x00000007
+					0x00000007 0x00000002 0x0000000a 0x00000007
+					0x00000007 0x00000003 0x00000002 0x00000000
+					0x00000003 0x00000007 0x00000004 0x0000000d
+					0x0000000e 0x000005e9 0x00000000 0x0000017a
+					0x00000002 0x00000002 0x00000007 0x00000000
+					0x00000001 0x0000000c 0x00000038 0x00000038
+					0x00000006 0x00000014 0x00000009 0x00000004
+					0x00000002 0x00000680 0x00000000 0x00000006
+					0x00000000 0x00000000 0x00006282 0x001d0084
+					0x00008000 0x00034000 0x00034000 0x00034000
+					0x00034000 0x00034000 0x00034000 0x00034000
+					0x00034000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00038000 0x00038000 0x00038000
+					0x00038000 0x00080220 0x0800003d 0x00000000
+					0x77ffc004 0x01f1f408 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000090 0x000c000c 0xa0f10404 0x00000000
+					0x00000000 0x80000ce6 0xe0000000 0xff00ff88 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* ELPIDA EDB8132B2MA 8D_F */
+			nvidia,ram-code = <1>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000003 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x0000000a 0x00000060 0x00000000 0x00000018
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000004 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x0000006b 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000000a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x800001c5 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000003
+					0x00000006 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x0000000a 0x000000c0 0x00000000 0x00000030
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000008 0x00000008
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000000d5 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000013 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x0000000a>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000006
+					0x0000000d 0x00000004 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x0000000a 0x00000181 0x00000000 0x00000060
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x0000000f 0x0000000f
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000001a9 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000025 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010042>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000013>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000c
+					0x0000001a 0x00000008 0x00000003 0x00000005
+					0x00000004 0x00000001 0x00000006 0x00000003
+					0x00000003 0x00000002 0x00000002 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000c
+					0x0000000a 0x00000303 0x00000000 0x000000c0
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000007 0x0000001d 0x0000001d
+					0x00000004 0x0000000b 0x00000005 0x00000004
+					0x00000002 0x00000351 0x00000004 0x00000006
+					0x00000000 0x00000000 0x00004282 0x004400a4
+					0x00008000 0x00070000 0x00070000 0x00070000
+					0x00070000 0x00070000 0x00070000 0x00070000
+					0x00070000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000e0220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000004a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010082>;
+				nvidia,emc-mode-2 = <0x00020004>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000024>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000017
+					0x00000033 0x00000010 0x00000007 0x00000007
+					0x00000007 0x00000002 0x0000000a 0x00000007
+					0x00000007 0x00000003 0x00000002 0x00000000
+					0x00000003 0x00000007 0x00000004 0x0000000d
+					0x0000000e 0x000005e9 0x00000000 0x0000017a
+					0x00000002 0x00000002 0x00000007 0x00000000
+					0x00000001 0x0000000c 0x00000038 0x00000038
+					0x00000006 0x00000014 0x00000009 0x00000004
+					0x00000002 0x00000680 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00006282 0x001d0084
+					0x00008000 0x00034000 0x00034000 0x00034000
+					0x00034000 0x00034000 0x00034000 0x00034000
+					0x00034000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00048000 0x00048000 0x00048000
+					0x00048000 0x00060220 0x0800003d 0x00000000
+					0x77ffc004 0x01f1f408 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000090 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000ce6 0xe0000000 0xff00ff88 >;
+			};
+		};
+
+		emc-timings-2 {
+			/* SAMSUNG K4P8G304EB FGC2 */
+			nvidia,ram-code = <2>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000003 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x0000000a 0x00000060 0x00000000 0x00000018
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000004 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x0000006b 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000000a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x800001c5 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000003
+					0x00000006 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x0000000a 0x000000c0 0x00000000 0x00000030
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000008 0x00000008
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000000d5 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000013 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x0000000a>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000006
+					0x0000000d 0x00000004 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x00000181 0x00000000 0x00000060
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x0000000f 0x0000000f
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000001a9 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000025 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010042>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000013>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000c
+					0x0000001a 0x00000008 0x00000003 0x00000005
+					0x00000004 0x00000001 0x00000006 0x00000003
+					0x00000003 0x00000002 0x00000002 0x00000000
+					0x00000001 0x00000004 0x00000001 0x0000000c
+					0x0000000a 0x00000303 0x00000000 0x000000c0
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000007 0x0000001d 0x0000001d
+					0x00000004 0x0000000b 0x00000005 0x00000004
+					0x00000002 0x00000351 0x00000005 0x00000004
+					0x00000000 0x00000000 0x00004282 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000e0220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000004a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-533000000 {
+				clock-frequency = <533000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x000100c2>;
+				nvidia,emc-mode-2 = <0x00020006>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000030>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000001f
+					0x00000045 0x00000016 0x00000009 0x00000008
+					0x00000009 0x00000003 0x0000000d 0x00000009
+					0x00000009 0x00000005 0x00000003 0x00000000
+					0x00000004 0x0000000a 0x00000006 0x0000000d
+					0x00000010 0x000007df 0x00000000 0x000001f7
+					0x00000003 0x00000003 0x00000009 0x00000000
+					0x00000001 0x0000000f 0x0000004b 0x0000004b
+					0x00000008 0x0000001b 0x0000000c 0x00000004
+					0x00000002 0x000008aa 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00006282 0xf0120091
+					0x00008000 0x007f8008 0x007f8008 0x007f8008
+					0x007f8008 0x007f8008 0x007f8008 0x007f8008
+					0x007f8008 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000c 0x0000000c 0x0000000c
+					0x0000000c 0x00080220 0x0200003d 0x00000000
+					0x77ffc004 0x01f1f408 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x000000c0 0x000e000e 0xa0f10000 0x00000000
+					0x00000000 0x800010d9 0xf0000000 0xff00ff88 >;
+			};
+		};
+
+		emc-timings-3 {
+			/* HYNIX H9TCNNN8JDMMPR NGM */
+			nvidia,ram-code = <3>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000003 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x0000000a 0x00000060 0x00000000 0x00000018
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000004 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x0000006b 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000000a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x800001c5 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000003
+					0x00000006 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x0000000a 0x000000c0 0x00000000 0x00000030
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000008 0x00000008
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000000d5 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000013 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x0000000a>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000006
+					0x0000000d 0x00000004 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x0000000a 0x00000181 0x00000000 0x00000060
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x0000000f 0x0000000f
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000001a9 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000025 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010042>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000013>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000c
+					0x0000001a 0x00000008 0x00000003 0x00000005
+					0x00000004 0x00000001 0x00000006 0x00000003
+					0x00000003 0x00000002 0x00000002 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000c
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000007 0x0000001d 0x0000001d
+					0x00000004 0x0000000b 0x00000005 0x00000004
+					0x00000002 0x00000351 0x00000004 0x00000006
+					0x00000000 0x00000000 0x00004282 0x004400a4
+					0x00008000 0x00072000 0x00072000 0x00072000
+					0x00072000 0x00072000 0x00072000 0x00072000
+					0x00072000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000e0220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000004a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xd0000000 0xff00ff00 >;
+			};
+
+			timing-533000000 {
+				clock-frequency = <533000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x000100c2>;
+				nvidia,emc-mode-2 = <0x00020006>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000030>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000001f
+					0x00000045 0x00000016 0x00000009 0x00000008
+					0x00000009 0x00000003 0x0000000d 0x00000009
+					0x00000009 0x00000005 0x00000003 0x00000000
+					0x00000004 0x00000009 0x00000006 0x0000000d
+					0x00000010 0x000007df 0x00000000 0x000001f7
+					0x00000003 0x00000003 0x00000009 0x00000000
+					0x00000001 0x0000000f 0x0000004b 0x0000004b
+					0x00000008 0x0000001b 0x0000000c 0x00000004
+					0x00000002 0x000008aa 0x00000000 0x00000006
+					0x00000000 0x00000000 0x00006282 0xf0120091
+					0x00008000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000c 0x0000000c 0x0000000c
+					0x0000000c 0x000a0220 0x0800003d 0x00000000
+					0x77ffc004 0x01f1f408 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x000000c0 0x000e000e 0xa0f10000 0x00000000
+					0x00000000 0x800010d9 0xe0000000 0xff00ff88 >;
+			};
+		};
+	};
+
+	hda@70030000 {
+		status = "okay";
+	};
+
+	ahub@70080000 {
+		i2s@70080400 { /* i2s1 */
+			status = "okay";
+		};
+
+		/* BT SCO */
+		i2s@70080600 { /* i2s3 */
+			status = "okay";
+		};
+	};
+
+	sdmmc1: mmc@78000000 {
+		status = "okay";
+
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		bus-width = <4>;
+
+		vmmc-supply = <&vdd_usd>; /* ldo2 */
+		vqmmc-supply = <&vddio_usd>; /* ldo3 */
+	};
+
+	sdmmc3: mmc@78000400 {
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_SDMMC3>;
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_C>;
+		assigned-clock-rates = <50000000>;
+
+		max-frequency = <50000000>;
+		keep-power-in-suspend;
+		bus-width = <4>;
+		non-removable;
+
+		mmc-pwrseq = <&brcm_wifi_pwrseq>;
+		vmmc-supply = <&vdd_3v3_sys>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+
+		/* Azurewave AW-AH663 BCM4330B1 */
+		wifi@1 {
+			compatible = "brcm,bcm4329-fmac";
+			reg = <1>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host-wake";
+		};
+	};
+
+	sdmmc4: mmc@78000600 {
+		status = "okay";
+		bus-width = <8>;
+		vmmc-supply = <&vcore_emmc>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+		non-removable;
+	};
+
+	usb@7d000000 {
+		compatible = "nvidia,tegra30-udc";
+		status = "okay";
+		dr_mode = "otg";
+		vbus-supply = <&vdd_vbus_usb1>;
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		dr_mode = "otg";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+	};
+
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&vdd_vbus_usb3>;
+	};
+
+	mains: ac-adapter-detect {
+		compatible = "gpio-charger";
+		charger-type = "mains";
+		gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_5v0_bl>;
+		pwms = <&pwm 0 5000000>;
+
+		brightness-levels = <1 255>;
+		num-interpolated-steps = <254>;
+		default-brightness-level = <15>;
+	};
+
+	battery: battery-cell {
+		compatible = "simple-battery";
+		device-chemistry = "lithium-ion-polymer";
+		charge-full-design-microamp-hours = <3050000>;
+		energy-full-design-microwatt-hours = <23000000>;
+		operating-range-celsius = <0 45>;
+	};
+
+	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "pmic-oscillator";
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu1: cpu@1 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu2: cpu@2 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu3: cpu@3 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	display-panel {
+		compatible = "hannstar,hsd101pww2", "panel-lvds";
+
+		width-mm = <217>;
+		height-mm = <136>;
+
+		data-mapping = "jeida-24";
+
+		panel-timing {
+			/* 1280x800@60Hz */
+			clock-frequency = <68000000>;
+			hactive = <1280>;
+			vactive = <800>;
+			hfront-porch = <48>;
+			hback-porch = <18>;
+			hsync-len = <30>;
+			vsync-len = <5>;
+			vfront-porch = <3>;
+			vback-porch = <12>;
+		};
+	};
+
+	extcon-keys {
+		compatible = "gpio-keys";
+
+		switch-dock-insert {
+			label = "Chagall Dock";
+			gpios = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_DOCK>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		switch-lineout-detect {
+			label = "Audio dock line-out detect";
+			gpios = <&gpio TEGRA_GPIO(S, 3) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LINEOUT_INSERT>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(Q, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	haptic-feedback {
+		compatible = "gpio-vibrator";
+		enable-gpios = <&gpio TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
+		vcc-supply = <&vdd_3v3_sys>;
+	};
+
+	opp-table-actmon {
+		/delete-node/ opp-625000000;
+		/delete-node/ opp-667000000;
+		/delete-node/ opp-750000000;
+		/delete-node/ opp-800000000;
+		/delete-node/ opp-900000000;
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-625000000-1200;
+		/delete-node/ opp-625000000-1250;
+		/delete-node/ opp-667000000-1200;
+		/delete-node/ opp-750000000-1300;
+		/delete-node/ opp-800000000-1300;
+		/delete-node/ opp-900000000-1350;
+	};
+
+	brcm_wifi_pwrseq: pwrseq-wifi {
+		compatible = "mmc-pwrseq-simple";
+
+		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+		clock-names = "ext_clock";
+
+		reset-gpios = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <300>;
+		power-off-delay-us = <300>;
+	};
+
+	sound {
+		compatible = "pegatron,tegra-audio-wm8903-chagall",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "Pegatron Chagall WM8903";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"IN1R", "Mic Jack",
+			"DMICDAT", "Int Mic";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+		nvidia,headset;
+
+		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA30_CLK_EXTERN1>;
+	};
+
+	thermal-zones {
+		/*
+		 * NCT72 has two sensors:
+		 *
+		 *	0: internal that monitors ambient/skin temperature
+		 *	1: external that is connected to the CPU's diode
+		 *
+		 * Ideally we should use userspace thermal governor,
+		 * but it's a much more complex solution.  The "skin"
+		 * zone exists as a simpler solution which prevents
+		 * Chagall from getting too hot from a user's tactile
+		 * perspective. The CPU zone is intended to protect
+		 * silicon from damage.
+		 */
+
+		skin-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct72 0>;
+
+			trips {
+				trip0: skin-alert {
+					/* throttle at 57C until temperature drops to 56.8C */
+					temperature = <57000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip1: skin-crit {
+					/* shut down at 65C */
+					temperature = <65000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&trip0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT
+								  THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct72 1>;
+
+			trips {
+				trip2: cpu-alert {
+					/* throttle at 85C until temperature drops to 84.8C */
+					temperature = <85000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip3: cpu-crit {
+					/* shut down at 90C */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&trip2>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT
+								  THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-peripherals-opp.dtsi b/arch/arm/boot/dts/nvidia/tegra30-peripherals-opp.dtsi
new file mode 100644
index 000000000000..a2d557155114
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-peripherals-opp.dtsi
@@ -0,0 +1,1648 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	core_opp_table: opp-table-core {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		core_opp_950: opp-950000 {
+			opp-microvolt = <950000 950000 1350000>;
+			opp-level = <950000>;
+		};
+
+		core_opp_1000: opp-1000000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-level = <1000000>;
+		};
+
+		core_opp_1050: opp-1050000 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-level = <1050000>;
+		};
+
+		core_opp_1100: opp-1100000 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-level = <1100000>;
+		};
+
+		core_opp_1150: opp-1150000 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-level = <1150000>;
+		};
+
+		core_opp_1200: opp-1200000 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-level = <1200000>;
+		};
+
+		core_opp_1250: opp-1250000 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-level = <1250000>;
+		};
+
+		core_opp_1300: opp-1300000 {
+			opp-microvolt = <1300000 1300000 1350000>;
+			opp-level = <1300000>;
+		};
+
+		core_opp_1350: opp-1350000 {
+			opp-microvolt = <1350000 1350000 1350000>;
+			opp-level = <1350000>;
+		};
+	};
+
+	emc_icc_dvfs_opp_table: opp-table-emc {
+		compatible = "operating-points-v2";
+
+		opp-12750000-950 {
+			opp-microvolt = <950000 950000 1350000>;
+			opp-hz = /bits/ 64 <12750000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-12750000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <12750000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-12750000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <12750000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-25500000-950 {
+			opp-microvolt = <950000 950000 1350000>;
+			opp-hz = /bits/ 64 <25500000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-25500000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <25500000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-25500000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <25500000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-27000000-950 {
+			opp-microvolt = <950000 950000 1350000>;
+			opp-hz = /bits/ 64 <27000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-27000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <27000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-27000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <27000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-51000000-950 {
+			opp-microvolt = <950000 950000 1350000>;
+			opp-hz = /bits/ 64 <51000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-51000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <51000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-51000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <51000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-54000000-950 {
+			opp-microvolt = <950000 950000 1350000>;
+			opp-hz = /bits/ 64 <54000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-54000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <54000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-54000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <54000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-102000000-950 {
+			opp-microvolt = <950000 950000 1350000>;
+			opp-hz = /bits/ 64 <102000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-102000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <102000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-102000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <102000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-108000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <108000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-108000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <108000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-204000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <204000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1000>;
+			opp-suspend;
+		};
+
+		opp-204000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <204000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+			opp-suspend;
+		};
+
+		opp-266500000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <266500000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-266500000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <266500000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-333500000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <333500000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-333500000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <333500000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-333500000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <333500000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-375000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <375000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-375000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <375000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-375000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <375000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-400000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <400000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-400000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <400000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-400000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <400000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-416000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <416000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-416000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <416000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-450000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <450000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-450000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <450000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-500000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <500000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-500000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <500000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-533000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <533000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-533000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <533000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-625000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <625000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-625000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <625000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-667000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <667000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-750000000-1300 {
+			opp-microvolt = <1300000 1300000 1350000>;
+			opp-hz = /bits/ 64 <750000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1300>;
+		};
+
+		opp-800000000-1300 {
+			opp-microvolt = <1300000 1300000 1350000>;
+			opp-hz = /bits/ 64 <800000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1300>;
+		};
+
+		opp-900000000-1350 {
+			opp-microvolt = <1350000 1350000 1350000>;
+			opp-hz = /bits/ 64 <900000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1350>;
+		};
+	};
+
+	emc_bw_dfs_opp_table: opp-table-actmon {
+		compatible = "operating-points-v2";
+
+		opp-12750000 {
+			opp-hz = /bits/ 64 <12750000>;
+			opp-supported-hw = <0x000F>;
+			opp-peak-kBps = <102000>;
+		};
+
+		opp-25500000 {
+			opp-hz = /bits/ 64 <25500000>;
+			opp-supported-hw = <0x000F>;
+			opp-peak-kBps = <204000>;
+		};
+
+		opp-27000000 {
+			opp-hz = /bits/ 64 <27000000>;
+			opp-supported-hw = <0x000F>;
+			opp-peak-kBps = <216000>;
+		};
+
+		opp-51000000 {
+			opp-hz = /bits/ 64 <51000000>;
+			opp-supported-hw = <0x000F>;
+			opp-peak-kBps = <408000>;
+		};
+
+		opp-54000000 {
+			opp-hz = /bits/ 64 <54000000>;
+			opp-supported-hw = <0x000F>;
+			opp-peak-kBps = <432000>;
+		};
+
+		opp-102000000 {
+			opp-hz = /bits/ 64 <102000000>;
+			opp-supported-hw = <0x000F>;
+			opp-peak-kBps = <816000>;
+		};
+
+		opp-108000000 {
+			opp-hz = /bits/ 64 <108000000>;
+			opp-supported-hw = <0x000F>;
+			opp-peak-kBps = <864000>;
+		};
+
+		opp-204000000 {
+			opp-hz = /bits/ 64 <204000000>;
+			opp-supported-hw = <0x000F>;
+			opp-peak-kBps = <1632000>;
+			opp-suspend;
+		};
+
+		opp-266500000 {
+			opp-hz = /bits/ 64 <266500000>;
+			opp-supported-hw = <0x000F>;
+			opp-peak-kBps = <2132000>;
+		};
+
+		opp-333500000 {
+			opp-hz = /bits/ 64 <333500000>;
+			opp-supported-hw = <0x000F>;
+			opp-peak-kBps = <2668000>;
+		};
+
+		opp-375000000 {
+			opp-hz = /bits/ 64 <375000000>;
+			opp-supported-hw = <0x000F>;
+			opp-peak-kBps = <3000000>;
+		};
+
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-supported-hw = <0x000F>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		opp-416000000 {
+			opp-hz = /bits/ 64 <416000000>;
+			opp-supported-hw = <0x000F>;
+			opp-peak-kBps = <3328000>;
+		};
+
+		opp-450000000 {
+			opp-hz = /bits/ 64 <450000000>;
+			opp-supported-hw = <0x000F>;
+			opp-peak-kBps = <3600000>;
+		};
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-supported-hw = <0x000F>;
+			opp-peak-kBps = <4000000>;
+		};
+
+		opp-533000000 {
+			opp-hz = /bits/ 64 <533000000>;
+			opp-supported-hw = <0x000F>;
+			opp-peak-kBps = <4264000>;
+		};
+
+		opp-625000000 {
+			opp-hz = /bits/ 64 <625000000>;
+			opp-supported-hw = <0x000E>;
+			opp-peak-kBps = <5000000>;
+		};
+
+		opp-667000000 {
+			opp-hz = /bits/ 64 <667000000>;
+			opp-supported-hw = <0x0006>;
+			opp-peak-kBps = <5336000>;
+		};
+
+		opp-750000000 {
+			opp-hz = /bits/ 64 <750000000>;
+			opp-supported-hw = <0x0004>;
+			opp-peak-kBps = <6000000>;
+		};
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-supported-hw = <0x0004>;
+			opp-peak-kBps = <6400000>;
+		};
+
+		opp-900000000 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-supported-hw = <0x0004>;
+			opp-peak-kBps = <7200000>;
+		};
+	};
+
+	pcie_dvfs_opp_table: opp-table-pcie {
+		compatible = "operating-points-v2";
+
+		opp-250000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <250000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	host1x_dvfs_opp_table: opp-table-host1x {
+		compatible = "operating-points-v2";
+
+		opp-152000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <152000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-188000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <188000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-222000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <222000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-242000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <242000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-254000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <254000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1150>;
+		};
+
+		opp-267000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <267000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-300000000-1350 {
+			opp-microvolt = <1350000 1350000 1350000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1350>;
+		};
+	};
+
+	mpe_dvfs_opp_table: opp-table-mpe {
+		compatible = "operating-points-v2";
+
+		opp-234000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <234000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-247000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <247000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-285000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <285000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-304000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <304000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-332000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <332000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-361000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <361000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-380000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <380000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1150>;
+		};
+
+		opp-408000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <408000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1150>;
+		};
+
+		opp-416000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <416000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-446000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <446000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-484000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <484000000>;
+			opp-supported-hw = <0x000C>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-520000000-1300 {
+			opp-microvolt = <1300000 1300000 1350000>;
+			opp-hz = /bits/ 64 <520000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1300>;
+		};
+
+		opp-600000000-1350 {
+			opp-microvolt = <1350000 1350000 1350000>;
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1350>;
+		};
+	};
+
+	vi_dvfs_opp_table: opp-table-vi {
+		compatible = "operating-points-v2";
+
+		opp-216000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <216000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-219000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <219000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-267000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <267000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-285000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <285000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-300000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-371000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <371000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1150>;
+		};
+
+		opp-409000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <409000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-425000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <425000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-470000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <470000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+	};
+
+	epp_dvfs_opp_table: opp-table-epp {
+		compatible = "operating-points-v2";
+
+		opp-267000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <267000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-285000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <285000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-304000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <304000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-332000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <332000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-361000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <361000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-380000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <380000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1150>;
+		};
+
+		opp-408000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <408000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1150>;
+		};
+
+		opp-416000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <416000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-446000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <446000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-484000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <484000000>;
+			opp-supported-hw = <0x000C>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-520000000-1300 {
+			opp-microvolt = <1300000 1300000 1350000>;
+			opp-hz = /bits/ 64 <520000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1300>;
+		};
+
+		opp-600000000-1350 {
+			opp-microvolt = <1350000 1350000 1350000>;
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1350>;
+		};
+	};
+
+	gr2d_dvfs_opp_table: opp-table-gr2d {
+		compatible = "operating-points-v2";
+
+		opp-267000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <267000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-285000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <285000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-304000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <304000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-332000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <332000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-361000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <361000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-380000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <380000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1150>;
+		};
+
+		opp-408000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <408000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1150>;
+		};
+
+		opp-416000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <416000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-446000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <446000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-484000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <484000000>;
+			opp-supported-hw = <0x000C>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-520000000-1300 {
+			opp-microvolt = <1300000 1300000 1350000>;
+			opp-hz = /bits/ 64 <520000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1300>;
+		};
+
+		opp-600000000-1350 {
+			opp-microvolt = <1350000 1350000 1350000>;
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1350>;
+		};
+	};
+
+	gr3d_dvfs_opp_table: opp-table-gr3d {
+		compatible = "operating-points-v2";
+
+		opp-234000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <234000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1000>, <&core_opp_1000>;
+		};
+
+		opp-247000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <247000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1000>, <&core_opp_1000>;
+		};
+
+		opp-285000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <285000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1050>, <&core_opp_1050>;
+		};
+
+		opp-304000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <304000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1050>, <&core_opp_1050>;
+		};
+
+		opp-332000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <332000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1100>, <&core_opp_1100>;
+		};
+
+		opp-361000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <361000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1100>, <&core_opp_1100>;
+		};
+
+		opp-380000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <380000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1150>, <&core_opp_1150>;
+		};
+
+		opp-408000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <408000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1150>, <&core_opp_1150>;
+		};
+
+		opp-416000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <416000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1200>, <&core_opp_1200>;
+		};
+
+		opp-446000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <446000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1200>, <&core_opp_1200>;
+		};
+
+		opp-484000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <484000000>;
+			opp-supported-hw = <0x000C>;
+			required-opps = <&core_opp_1250>, <&core_opp_1250>;
+		};
+
+		opp-520000000-1300 {
+			opp-microvolt = <1300000 1300000 1350000>;
+			opp-hz = /bits/ 64 <520000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1300>, <&core_opp_1300>;
+		};
+
+		opp-600000000-1350 {
+			opp-microvolt = <1350000 1350000 1350000>;
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1350>, <&core_opp_1350>;
+		};
+	};
+
+	disp1_dvfs_opp_table: opp-table-disp1 {
+		compatible = "operating-points-v2";
+
+		opp-120000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <120000000>;
+			opp-supported-hw = <0x0009>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-155000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <155000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-190000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <190000000>;
+			opp-supported-hw = <0x0009>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-268000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <268000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1050>;
+		};
+	};
+
+	disp2_dvfs_opp_table: opp-table-disp2 {
+		compatible = "operating-points-v2";
+
+		opp-120000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <120000000>;
+			opp-supported-hw = <0x0009>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-155000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <155000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-190000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <190000000>;
+			opp-supported-hw = <0x0009>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-268000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <268000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1050>;
+		};
+	};
+
+	hdmi_dvfs_opp_table: opp-table-hdmi {
+		compatible = "operating-points-v2";
+
+		opp-148500000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <148500000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	tvo_dvfs_opp_table: opp-table-tvo {
+		compatible = "operating-points-v2";
+
+		opp-297000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <297000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1050>;
+		};
+	};
+
+	dsia_dvfs_opp_table: opp-table-dsia {
+		compatible = "operating-points-v2";
+
+		opp-275000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <275000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	dsib_dvfs_opp_table: opp-table-dsib {
+		compatible = "operating-points-v2";
+
+		opp-275000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <275000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	sclk_dvfs_opp_table: opp-table-sclk {
+		compatible = "operating-points-v2";
+
+		opp-51000000-950 {
+			opp-microvolt = <950000 950000 1350000>;
+			opp-hz = /bits/ 64 <51000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-136000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <136000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-164000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <164000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-191000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <191000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-205000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <205000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-216000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <216000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1150>;
+		};
+
+		opp-227000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <227000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-267000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <267000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-334000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <334000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-378000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <378000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+	};
+
+	pll_c_dvfs_opp_table: opp-table-pllc {
+		compatible = "operating-points-v2";
+
+		opp-533000000-950 {
+			opp-microvolt = <950000 950000 1350000>;
+			opp-hz = /bits/ 64 <533000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-667000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <667000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-800000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <800000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-1066000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <1066000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-1200000000-1350 {
+			opp-microvolt = <1350000 1350000 1350000>;
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1350>;
+		};
+	};
+
+	pll_e_dvfs_opp_table: opp-table-plle {
+		compatible = "operating-points-v2";
+
+		opp-100000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <100000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	pll_m_dvfs_opp_table: opp-table-pllm {
+		compatible = "operating-points-v2";
+
+		opp-533000000-950 {
+			opp-microvolt = <950000 950000 1350000>;
+			opp-hz = /bits/ 64 <533000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-667000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <667000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-800000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <800000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-1066000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <1066000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	vde_dvfs_opp_table: opp-table-vde {
+		compatible = "operating-points-v2";
+
+		opp-228000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <228000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-247000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <247000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-275000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <275000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-304000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <304000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-332000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <332000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-352000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <352000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-380000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <380000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1150>;
+		};
+
+		opp-400000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <400000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1150>;
+		};
+
+		opp-416000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <416000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-437000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <437000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-484000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <484000000>;
+			opp-supported-hw = <0x000C>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-520000000-1300 {
+			opp-microvolt = <1300000 1300000 1350000>;
+			opp-hz = /bits/ 64 <520000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1300>;
+		};
+
+		opp-600000000-1350 {
+			opp-microvolt = <1350000 1350000 1350000>;
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1350>;
+		};
+	};
+
+	fuse_burn_dvfs_opp_table: opp-table-fuseburn {
+		compatible = "operating-points-v2";
+
+		opp-26000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <26000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1150>;
+		};
+	};
+
+	nor_dvfs_opp_table: opp-table-nor {
+		compatible = "operating-points-v2";
+
+		opp-108000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <108000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-115000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <115000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-130000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <130000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-133000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <133000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1150>;
+		};
+	};
+
+	pwm_dvfs_opp_table: opp-table-pwm {
+		compatible = "operating-points-v2";
+
+		opp-408000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <408000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	sbc1_dvfs_opp_table: opp-table-sbc1 {
+		compatible = "operating-points-v2";
+
+		opp-52000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <52000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-60000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <60000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-100000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <100000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	sbc2_dvfs_opp_table: opp-table-sbc2 {
+		compatible = "operating-points-v2";
+
+		opp-52000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <52000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-60000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <60000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-100000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <100000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	sbc3_dvfs_opp_table: opp-table-sbc3 {
+		compatible = "operating-points-v2";
+
+		opp-52000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <52000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-60000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <60000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-100000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <100000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	sbc4_dvfs_opp_table: opp-table-sbc4 {
+		compatible = "operating-points-v2";
+
+		opp-52000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <52000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-60000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <60000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-100000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <100000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	sbc5_dvfs_opp_table: opp-table-sbc5 {
+		compatible = "operating-points-v2";
+
+		opp-52000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <52000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-60000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <60000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-100000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <100000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	sbc6_dvfs_opp_table: opp-table-sbc6 {
+		compatible = "operating-points-v2";
+
+		opp-52000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <52000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-60000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <60000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-100000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <100000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	sdmmc1_dvfs_opp_table: opp-table-sdmmc1 {
+		compatible = "operating-points-v2";
+
+		opp-104000000-950 {
+			opp-microvolt = <950000 950000 1350000>;
+			opp-hz = /bits/ 64 <104000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-208000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <208000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	sdmmc3_dvfs_opp_table: opp-table-sdmmc3 {
+		compatible = "operating-points-v2";
+
+		opp-104000000-950 {
+			opp-microvolt = <950000 950000 1350000>;
+			opp-hz = /bits/ 64 <104000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-208000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <208000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	usbd_dvfs_opp_table: opp-table-usbd {
+		compatible = "operating-points-v2";
+
+		opp-480000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <480000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	usb2_dvfs_opp_table: opp-table-usb2 {
+		compatible = "operating-points-v2";
+
+		opp-480000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <480000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	usb3_dvfs_opp_table: opp-table-usb3 {
+		compatible = "operating-points-v2";
+
+		opp-480000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <480000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/nvidia/tegra30.dtsi
index eaf4951d9ff8..4c4e6097c916 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra30.dtsi
@@ -55,6 +55,8 @@
 			 <&tegra_car 72>,
 			 <&tegra_car 74>;
 		reset-names = "pex", "afi", "pcie_x";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&pcie_dvfs_opp_table>;
 		status = "disabled";
 
 		pci@1,0 {
@@ -121,9 +123,11 @@
 		interrupt-names = "syncpt", "host1x";
 		clocks = <&tegra_car TEGRA30_CLK_HOST1X>;
 		clock-names = "host1x";
-		resets = <&tegra_car 28>;
-		reset-names = "host1x";
+		resets = <&tegra_car 28>, <&mc TEGRA30_MC_RESET_HC>;
+		reset-names = "host1x", "mc";
 		iommus = <&mc TEGRA_SWGROUP_HC>;
+		power-domains = <&pd_heg>;
+		operating-points-v2 = <&host1x_dvfs_opp_table>;
 
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -137,19 +141,47 @@
 			clocks = <&tegra_car TEGRA30_CLK_MPE>;
 			resets = <&tegra_car 60>;
 			reset-names = "mpe";
+			power-domains = <&pd_mpe>;
+			operating-points-v2 = <&mpe_dvfs_opp_table>;
 
 			iommus = <&mc TEGRA_SWGROUP_MPE>;
+
+			status = "disabled";
 		};
 
 		vi@54080000 {
-			compatible = "nvidia,tegra30-vi";
-			reg = <0x54080000 0x00040000>;
+			compatible = "nvidia,tegra30-vi", "nvidia,tegra20-vi";
+			reg = <0x54080000 0x00000800>;
 			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&tegra_car TEGRA30_CLK_VI>;
 			resets = <&tegra_car 20>;
 			reset-names = "vi";
+			power-domains = <&pd_venc>;
+			operating-points-v2 = <&vi_dvfs_opp_table>;
 
 			iommus = <&mc TEGRA_SWGROUP_VI>;
+
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0x0 0x54080000 0x4000>;
+
+			csi: csi@800 {
+				compatible = "nvidia,tegra30-csi";
+				reg = <0x800 0x200>;
+				clocks = <&tegra_car TEGRA30_CLK_CSI>,
+					 <&tegra_car TEGRA30_CLK_CSIA_PAD>,
+					 <&tegra_car TEGRA30_CLK_CSIB_PAD>;
+				clock-names = "csi", "csia-pad", "csib-pad";
+				power-domains = <&pd_venc>;
+				#nvidia,mipi-calibrate-cells = <1>;
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
 		};
 
 		epp@540c0000 {
@@ -159,8 +191,12 @@
 			clocks = <&tegra_car TEGRA30_CLK_EPP>;
 			resets = <&tegra_car 19>;
 			reset-names = "epp";
+			power-domains = <&pd_heg>;
+			operating-points-v2 = <&epp_dvfs_opp_table>;
 
 			iommus = <&mc TEGRA_SWGROUP_EPP>;
+
+			status = "disabled";
 		};
 
 		isp@54100000 {
@@ -170,8 +206,11 @@
 			clocks = <&tegra_car TEGRA30_CLK_ISP>;
 			resets = <&tegra_car 23>;
 			reset-names = "isp";
+			power-domains = <&pd_venc>;
 
 			iommus = <&mc TEGRA_SWGROUP_ISP>;
+
+			status = "disabled";
 		};
 
 		gr2d@54140000 {
@@ -179,8 +218,10 @@
 			reg = <0x54140000 0x00040000>;
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&tegra_car TEGRA30_CLK_GR2D>;
-			resets = <&tegra_car 21>;
-			reset-names = "2d";
+			resets = <&tegra_car 21>, <&mc TEGRA30_MC_RESET_2D>;
+			reset-names = "2d", "mc";
+			power-domains = <&pd_heg>;
+			operating-points-v2 = <&gr2d_dvfs_opp_table>;
 
 			iommus = <&mc TEGRA_SWGROUP_G2>;
 		};
@@ -192,8 +233,13 @@
 				 <&tegra_car TEGRA30_CLK_GR3D2>;
 			clock-names = "3d", "3d2";
 			resets = <&tegra_car 24>,
-				 <&tegra_car 98>;
-			reset-names = "3d", "3d2";
+				 <&tegra_car 98>,
+				 <&mc TEGRA30_MC_RESET_3D>,
+				 <&mc TEGRA30_MC_RESET_3D2>;
+			reset-names = "3d", "3d2", "mc", "mc2";
+			power-domains = <&pd_3d0>, <&pd_3d1>;
+			power-domain-names = "3d0", "3d1";
+			operating-points-v2 = <&gr3d_dvfs_opp_table>;
 
 			iommus = <&mc TEGRA_SWGROUP_NV>,
 				 <&mc TEGRA_SWGROUP_NV2>;
@@ -208,6 +254,8 @@
 			clock-names = "dc", "parent";
 			resets = <&tegra_car 27>;
 			reset-names = "dc";
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&disp1_dvfs_opp_table>;
 
 			iommus = <&mc TEGRA_SWGROUP_DC>;
 
@@ -238,6 +286,8 @@
 			clock-names = "dc", "parent";
 			resets = <&tegra_car 26>;
 			reset-names = "dc";
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&disp2_dvfs_opp_table>;
 
 			iommus = <&mc TEGRA_SWGROUP_DCB>;
 
@@ -268,6 +318,8 @@
 			clock-names = "hdmi", "parent";
 			resets = <&tegra_car 51>;
 			reset-names = "hdmi";
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&hdmi_dvfs_opp_table>;
 			status = "disabled";
 		};
 
@@ -276,6 +328,8 @@
 			reg = <0x542c0000 0x00040000>;
 			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&tegra_car TEGRA30_CLK_TVO>;
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&tvo_dvfs_opp_table>;
 			status = "disabled";
 		};
 
@@ -287,6 +341,8 @@
 			clock-names = "dsi", "parent";
 			resets = <&tegra_car 48>;
 			reset-names = "dsi";
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&dsia_dvfs_opp_table>;
 			status = "disabled";
 		};
 
@@ -298,6 +354,8 @@
 			clock-names = "dsi", "parent";
 			resets = <&tegra_car 84>;
 			reset-names = "dsi";
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&dsib_dvfs_opp_table>;
 			status = "disabled";
 		};
 	};
@@ -358,6 +416,34 @@
 		reg = <0x60006000 0x1000>;
 		#clock-cells = <1>;
 		#reset-cells = <1>;
+
+		pll-c {
+			compatible = "nvidia,tegra30-pllc";
+			clocks = <&tegra_car TEGRA30_CLK_PLL_C>;
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&pll_c_dvfs_opp_table>;
+		};
+
+		pll-e {
+			compatible = "nvidia,tegra30-plle";
+			clocks = <&tegra_car TEGRA30_CLK_PLL_E>;
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&pll_e_dvfs_opp_table>;
+		};
+
+		pll-m {
+			compatible = "nvidia,tegra30-pllm";
+			clocks = <&tegra_car TEGRA30_CLK_PLL_M>;
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&pll_m_dvfs_opp_table>;
+		};
+
+		sclk {
+			compatible = "nvidia,tegra30-sclk";
+			clocks = <&tegra_car TEGRA30_CLK_SCLK>;
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&sclk_dvfs_opp_table>;
+		};
 	};
 
 	flow-controller@60007000 {
@@ -365,7 +451,7 @@
 		reg = <0x60007000 0x1000>;
 	};
 
-	apbdma: dma@6000a000 {
+	apbdma: dma-controller@6000a000 {
 		compatible = "nvidia,tegra30-apbdma", "nvidia,tegra20-apbdma";
 		reg = <0x6000a000 0x1400>;
 		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
@@ -441,9 +527,7 @@
 		gpio-controller;
 		#interrupt-cells = <2>;
 		interrupt-controller;
-		/*
 		gpio-ranges = <&pinmux 0 0 248>;
-		*/
 	};
 
 	vde@6001a000 {
@@ -468,6 +552,8 @@
 		reset-names = "vde", "mc";
 		resets = <&tegra_car 61>, <&mc TEGRA30_MC_RESET_VDE>;
 		iommus = <&mc TEGRA_SWGROUP_VDE>;
+		power-domains = <&pd_vde>;
+		operating-points-v2 = <&vde_dvfs_opp_table>;
 	};
 
 	apbmisc@70000800 {
@@ -497,7 +583,6 @@
 		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA30_CLK_UARTA>;
 		resets = <&tegra_car 6>;
-		reset-names = "serial";
 		dmas = <&apbdma 8>, <&apbdma 8>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -510,7 +595,6 @@
 		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA30_CLK_UARTB>;
 		resets = <&tegra_car 7>;
-		reset-names = "serial";
 		dmas = <&apbdma 9>, <&apbdma 9>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -523,7 +607,6 @@
 		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA30_CLK_UARTC>;
 		resets = <&tegra_car 55>;
-		reset-names = "serial";
 		dmas = <&apbdma 10>, <&apbdma 10>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -536,7 +619,6 @@
 		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA30_CLK_UARTD>;
 		resets = <&tegra_car 65>;
-		reset-names = "serial";
 		dmas = <&apbdma 19>, <&apbdma 19>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -549,7 +631,6 @@
 		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA30_CLK_UARTE>;
 		resets = <&tegra_car 66>;
-		reset-names = "serial";
 		dmas = <&apbdma 20>, <&apbdma 20>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -565,6 +646,8 @@
 		clock-names = "gmi";
 		resets = <&tegra_car 42>;
 		reset-names = "gmi";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&nor_dvfs_opp_table>;
 		status = "disabled";
 	};
 
@@ -575,16 +658,11 @@
 		clocks = <&tegra_car TEGRA30_CLK_PWM>;
 		resets = <&tegra_car 17>;
 		reset-names = "pwm";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&pwm_dvfs_opp_table>;
 		status = "disabled";
 	};
 
-	rtc@7000e000 {
-		compatible = "nvidia,tegra30-rtc", "nvidia,tegra20-rtc";
-		reg = <0x7000e000 0x100>;
-		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA30_CLK_RTC>;
-	};
-
 	i2c@7000c000 {
 		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
 		reg = <0x7000c000 0x100>;
@@ -666,7 +744,7 @@
 	};
 
 	spi@7000d400 {
-		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+		compatible = "nvidia,tegra30-slink";
 		reg = <0x7000d400 0x200>;
 		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -676,11 +754,13 @@
 		reset-names = "spi";
 		dmas = <&apbdma 15>, <&apbdma 15>;
 		dma-names = "rx", "tx";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&sbc1_dvfs_opp_table>;
 		status = "disabled";
 	};
 
 	spi@7000d600 {
-		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+		compatible = "nvidia,tegra30-slink";
 		reg = <0x7000d600 0x200>;
 		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -690,11 +770,13 @@
 		reset-names = "spi";
 		dmas = <&apbdma 16>, <&apbdma 16>;
 		dma-names = "rx", "tx";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&sbc2_dvfs_opp_table>;
 		status = "disabled";
 	};
 
 	spi@7000d800 {
-		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+		compatible = "nvidia,tegra30-slink";
 		reg = <0x7000d800 0x200>;
 		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -704,11 +786,13 @@
 		reset-names = "spi";
 		dmas = <&apbdma 17>, <&apbdma 17>;
 		dma-names = "rx", "tx";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&sbc3_dvfs_opp_table>;
 		status = "disabled";
 	};
 
 	spi@7000da00 {
-		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+		compatible = "nvidia,tegra30-slink";
 		reg = <0x7000da00 0x200>;
 		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -718,11 +802,13 @@
 		reset-names = "spi";
 		dmas = <&apbdma 18>, <&apbdma 18>;
 		dma-names = "rx", "tx";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&sbc4_dvfs_opp_table>;
 		status = "disabled";
 	};
 
 	spi@7000dc00 {
-		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+		compatible = "nvidia,tegra30-slink";
 		reg = <0x7000dc00 0x200>;
 		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -732,11 +818,13 @@
 		reset-names = "spi";
 		dmas = <&apbdma 27>, <&apbdma 27>;
 		dma-names = "rx", "tx";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&sbc5_dvfs_opp_table>;
 		status = "disabled";
 	};
 
 	spi@7000de00 {
-		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+		compatible = "nvidia,tegra30-slink";
 		reg = <0x7000de00 0x200>;
 		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -746,9 +834,18 @@
 		reset-names = "spi";
 		dmas = <&apbdma 28>, <&apbdma 28>;
 		dma-names = "rx", "tx";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&sbc6_dvfs_opp_table>;
 		status = "disabled";
 	};
 
+	rtc@7000e000 {
+		compatible = "nvidia,tegra30-rtc", "nvidia,tegra20-rtc";
+		reg = <0x7000e000 0x100>;
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_RTC>;
+	};
+
 	kbc@7000e200 {
 		compatible = "nvidia,tegra30-kbc", "nvidia,tegra20-kbc";
 		reg = <0x7000e200 0x100>;
@@ -765,6 +862,72 @@
 		clocks = <&tegra_car TEGRA30_CLK_PCLK>, <&clk32k_in>;
 		clock-names = "pclk", "clk32k_in";
 		#clock-cells = <1>;
+
+		pd_core: core-domain {
+			#power-domain-cells = <0>;
+			operating-points-v2 = <&core_opp_table>;
+		};
+
+		powergates {
+			pd_heg: heg {
+				clocks = <&tegra_car TEGRA30_CLK_GR2D>,
+					 <&tegra_car TEGRA30_CLK_EPP>,
+					 <&tegra_car TEGRA30_CLK_HOST1X>;
+				resets = <&mc TEGRA30_MC_RESET_2D>,
+					 <&mc TEGRA30_MC_RESET_EPP>,
+					 <&mc TEGRA30_MC_RESET_HC>,
+					 <&tegra_car TEGRA30_CLK_GR2D>,
+					 <&tegra_car TEGRA30_CLK_EPP>,
+					 <&tegra_car TEGRA30_CLK_HOST1X>;
+				power-domains = <&pd_core>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_mpe: mpe {
+				clocks = <&tegra_car TEGRA30_CLK_MPE>;
+				resets = <&mc TEGRA30_MC_RESET_MPE>,
+					 <&tegra_car TEGRA30_CLK_MPE>;
+				power-domains = <&pd_core>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_3d0: td {
+				clocks = <&tegra_car TEGRA30_CLK_GR3D>;
+				resets = <&mc TEGRA30_MC_RESET_3D>,
+					 <&tegra_car TEGRA30_CLK_GR3D>;
+				power-domains = <&pd_core>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_3d1: td2 {
+				clocks = <&tegra_car TEGRA30_CLK_GR3D2>;
+				resets = <&mc TEGRA30_MC_RESET_3D2>,
+					 <&tegra_car TEGRA30_CLK_GR3D2>;
+				power-domains = <&pd_core>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_vde: vdec {
+				clocks = <&tegra_car TEGRA30_CLK_VDE>;
+				resets = <&mc TEGRA30_MC_RESET_VDE>,
+					 <&tegra_car TEGRA30_CLK_VDE>;
+				power-domains = <&pd_core>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_venc: venc {
+				clocks = <&tegra_car TEGRA30_CLK_ISP>,
+					 <&tegra_car TEGRA30_CLK_VI>,
+					 <&tegra_car TEGRA30_CLK_CSI>;
+				resets = <&mc TEGRA30_MC_RESET_ISP>,
+					 <&mc TEGRA30_MC_RESET_VI>,
+					 <&tegra_car TEGRA30_CLK_ISP>,
+					 <&tegra_car 20 /* VI */>,
+					 <&tegra_car TEGRA30_CLK_CSI>;
+				power-domains = <&pd_core>;
+				#power-domain-cells = <0>;
+			};
+		};
 	};
 
 	mc: memory-controller@7000f000 {
@@ -785,6 +948,7 @@
 		reg = <0x7000f400 0x400>;
 		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA30_CLK_EMC>;
+		power-domains = <&pd_core>;
 
 		nvidia,memory-controller = <&mc>;
 		operating-points-v2 = <&emc_icc_dvfs_opp_table>;
@@ -799,6 +963,8 @@
 		clock-names = "fuse";
 		resets = <&tegra_car 39>;
 		reset-names = "fuse";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&fuse_burn_dvfs_opp_table>;
 	};
 
 	tsensor: tsensor@70014000 {
@@ -921,6 +1087,8 @@
 		clock-names = "sdhci";
 		resets = <&tegra_car 14>;
 		reset-names = "sdhci";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&sdmmc1_dvfs_opp_table>;
 		status = "disabled";
 	};
 
@@ -943,6 +1111,8 @@
 		clock-names = "sdhci";
 		resets = <&tegra_car 69>;
 		reset-names = "sdhci";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&sdmmc3_dvfs_opp_table>;
 		status = "disabled";
 	};
 
@@ -958,7 +1128,7 @@
 	};
 
 	usb@7d000000 {
-		compatible = "nvidia,tegra30-ehci", "usb-ehci";
+		compatible = "nvidia,tegra30-ehci";
 		reg = <0x7d000000 0x4000>;
 		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
@@ -967,6 +1137,8 @@
 		reset-names = "usb";
 		nvidia,needs-double-reset;
 		nvidia,phy = <&phy1>;
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&usbd_dvfs_opp_table>;
 		status = "disabled";
 	};
 
@@ -974,6 +1146,7 @@
 		compatible = "nvidia,tegra30-usb-phy";
 		reg = <0x7d000000 0x4000>,
 		      <0x7d000000 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA30_CLK_USBD>,
 			 <&tegra_car TEGRA30_CLK_PLL_U>,
@@ -994,11 +1167,12 @@
 		nvidia,hssquelch-level = <2>;
 		nvidia,hsdiscon-level = <5>;
 		nvidia,has-utmi-pad-registers;
+		nvidia,pmc = <&tegra_pmc 0>;
 		status = "disabled";
 	};
 
 	usb@7d004000 {
-		compatible = "nvidia,tegra30-ehci", "usb-ehci";
+		compatible = "nvidia,tegra30-ehci";
 		reg = <0x7d004000 0x4000>;
 		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
@@ -1006,6 +1180,8 @@
 		resets = <&tegra_car 58>;
 		reset-names = "usb";
 		nvidia,phy = <&phy2>;
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&usb2_dvfs_opp_table>;
 		status = "disabled";
 	};
 
@@ -1013,6 +1189,7 @@
 		compatible = "nvidia,tegra30-usb-phy";
 		reg = <0x7d004000 0x4000>,
 		      <0x7d000000 0x4000>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA30_CLK_USB2>,
 			 <&tegra_car TEGRA30_CLK_PLL_U>,
@@ -1032,11 +1209,12 @@
 		nvidia,xcvr-hsslew = <32>;
 		nvidia,hssquelch-level = <2>;
 		nvidia,hsdiscon-level = <5>;
+		nvidia,pmc = <&tegra_pmc 2>;
 		status = "disabled";
 	};
 
 	usb@7d008000 {
-		compatible = "nvidia,tegra30-ehci", "usb-ehci";
+		compatible = "nvidia,tegra30-ehci";
 		reg = <0x7d008000 0x4000>;
 		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
@@ -1044,6 +1222,8 @@
 		resets = <&tegra_car 59>;
 		reset-names = "usb";
 		nvidia,phy = <&phy3>;
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&usb3_dvfs_opp_table>;
 		status = "disabled";
 	};
 
@@ -1051,6 +1231,7 @@
 		compatible = "nvidia,tegra30-usb-phy";
 		reg = <0x7d008000 0x4000>,
 		      <0x7d000000 0x4000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA30_CLK_USB3>,
 			 <&tegra_car TEGRA30_CLK_PLL_U>,
@@ -1070,6 +1251,7 @@
 		nvidia,xcvr-hsslew = <32>;
 		nvidia,hssquelch-level = <2>;
 		nvidia,hsdiscon-level = <5>;
+		nvidia,pmc = <&tegra_pmc 1>;
 		status = "disabled";
 	};
 
@@ -1116,10 +1298,7 @@
 			     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&{/cpus/cpu@0}>,
-				     <&{/cpus/cpu@1}>,
-				     <&{/cpus/cpu@2}>,
-				     <&{/cpus/cpu@3}>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
 	};
 
 	thermal-zones {
diff --git a/arch/arm/boot/dts/nxp/Makefile b/arch/arm/boot/dts/nxp/Makefile
new file mode 100644
index 000000000000..db44e7a0a198
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+subdir-y += imx
+subdir-y += lpc
+subdir-y += ls
+subdir-y += mxs
+subdir-y += vf
diff --git a/arch/arm/boot/dts/nxp/imx/Makefile b/arch/arm/boot/dts/nxp/imx/Makefile
new file mode 100644
index 000000000000..de4142e8f3ce
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/Makefile
@@ -0,0 +1,419 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_SOC_IMX1) += \
+	imx1-ads.dtb \
+	imx1-apf9328.dtb
+dtb-$(CONFIG_SOC_IMX25) += \
+	imx25-eukrea-mbimxsd25-baseboard.dtb \
+	imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dtb \
+	imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dtb \
+	imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dtb \
+	imx25-karo-tx25.dtb \
+	imx25-pdk.dtb
+dtb-$(CONFIG_SOC_IMX27) += \
+	imx27-apf27.dtb \
+	imx27-apf27dev.dtb \
+	imx27-eukrea-mbimxsd27-baseboard.dtb \
+	imx27-pdk.dtb \
+	imx27-phytec-phycore-rdk.dtb \
+	imx27-phytec-phycard-s-rdk.dtb
+dtb-$(CONFIG_SOC_IMX31) += \
+	imx31-bug.dtb \
+	imx31-lite.dtb
+dtb-$(CONFIG_SOC_IMX35) += \
+	imx35-eukrea-mbimxsd35-baseboard.dtb \
+	imx35-pdk.dtb
+dtb-$(CONFIG_SOC_IMX50) += \
+	imx50-evk.dtb \
+	imx50-kobo-aura.dtb
+dtb-$(CONFIG_SOC_IMX51) += \
+	imx51-apf51.dtb \
+	imx51-apf51dev.dtb \
+	imx51-babbage.dtb \
+	imx51-digi-connectcore-jsk.dtb \
+	imx51-eukrea-mbimxsd51-baseboard.dtb \
+	imx51-ts4800.dtb \
+	imx51-zii-rdu1.dtb \
+	imx51-zii-scu2-mezz.dtb \
+	imx51-zii-scu3-esb.dtb
+dtb-$(CONFIG_SOC_IMX53) += \
+	imx53-ard.dtb \
+	imx53-cx9020.dtb \
+	imx53-kp-ddc.dtb \
+	imx53-kp-hsc.dtb \
+	imx53-m53evk.dtb \
+	imx53-m53menlo.dtb \
+	imx53-mba53.dtb \
+	imx53-ppd.dtb \
+	imx53-qsb.dtb \
+	imx53-qsb-hdmi.dtb \
+	imx53-qsrb.dtb \
+	imx53-qsrb-hdmi.dtb \
+	imx53-sk-imx53.dtb \
+	imx53-sk-imx53-atm0700d4-lvds.dtb \
+	imx53-sk-imx53-atm0700d4-rgb.dtb \
+	imx53-smd.dtb \
+	imx53-tx53-x03x.dtb \
+	imx53-tx53-x13x.dtb \
+	imx53-usbarmory.dtb \
+	imx53-voipac-bsb.dtb
+imx53-qsb-hdmi-dtbs := imx53-qsb.dtb imx53-qsb-hdmi.dtbo
+imx53-qsrb-hdmi-dtbs := imx53-qsrb.dtb imx53-qsb-hdmi.dtbo
+dtb-$(CONFIG_SOC_IMX6Q) += \
+	imx6dl-alti6p.dtb \
+	imx6dl-apf6dev.dtb \
+	imx6dl-aristainetos_4.dtb \
+	imx6dl-aristainetos_7.dtb \
+	imx6dl-aristainetos2_4.dtb \
+	imx6dl-aristainetos2_7.dtb \
+	imx6dl-colibri-aster.dtb \
+	imx6dl-colibri-eval-v3.dtb \
+	imx6dl-colibri-iris.dtb \
+	imx6dl-colibri-iris-v2.dtb \
+	imx6dl-colibri-v1.2-aster.dtb \
+	imx6dl-colibri-v1.2-eval-v3.dtb \
+	imx6dl-colibri-v1.2-iris.dtb \
+	imx6dl-colibri-v1.2-iris-v2.dtb \
+	imx6dl-cubox-i.dtb \
+	imx6dl-cubox-i-emmc-som-v15.dtb \
+	imx6dl-cubox-i-som-v15.dtb \
+	imx6dl-dfi-fs700-m60.dtb \
+	imx6dl-dhcom-pdk2.dtb \
+	imx6dl-dhcom-picoitx.dtb \
+	imx6dl-eckelmann-ci4x10.dtb \
+	imx6dl-emcon-avari.dtb \
+	imx6dl-gw51xx.dtb \
+	imx6dl-gw52xx.dtb \
+	imx6dl-gw53xx.dtb \
+	imx6dl-gw54xx.dtb \
+	imx6dl-gw551x.dtb \
+	imx6dl-gw552x.dtb \
+	imx6dl-gw553x.dtb \
+	imx6dl-gw560x.dtb \
+	imx6dl-gw5903.dtb \
+	imx6dl-gw5904.dtb \
+	imx6dl-gw5907.dtb \
+	imx6dl-gw5910.dtb \
+	imx6dl-gw5912.dtb \
+	imx6dl-gw5913.dtb \
+	imx6dl-hummingboard.dtb \
+	imx6dl-hummingboard-emmc-som-v15.dtb \
+	imx6dl-hummingboard-som-v15.dtb \
+	imx6dl-hummingboard2.dtb \
+	imx6dl-hummingboard2-emmc-som-v15.dtb \
+	imx6dl-hummingboard2-som-v15.dtb \
+	imx6dl-icore.dtb \
+	imx6dl-icore-mipi.dtb \
+	imx6dl-icore-rqs.dtb \
+	imx6dl-kontron-samx6i-ads2.dtb \
+	imx6dl-lanmcu.dtb \
+	imx6dl-mamoj.dtb \
+	imx6dl-mba6a.dtb \
+	imx6dl-mba6b.dtb \
+	imx6dl-nit6xlite.dtb \
+	imx6dl-nitrogen6x.dtb \
+	imx6dl-phytec-mira-rdk-nand.dtb \
+	imx6dl-phytec-pbab01.dtb \
+	imx6dl-pico-dwarf.dtb \
+	imx6dl-pico-hobbit.dtb \
+	imx6dl-pico-nymph.dtb \
+	imx6dl-pico-pi.dtb \
+	imx6dl-plybas.dtb \
+	imx6dl-plym2m.dtb \
+	imx6dl-prtmvt.dtb \
+	imx6dl-prtrvt.dtb \
+	imx6dl-prtvt7.dtb \
+	imx6dl-rex-basic.dtb \
+	imx6dl-riotboard.dtb \
+	imx6dl-sabreauto.dtb \
+	imx6dl-sabrelite.dtb \
+	imx6dl-sabresd.dtb \
+	imx6dl-savageboard.dtb \
+	imx6dl-sielaff.dtb \
+	imx6dl-skov-revc-lt2.dtb \
+	imx6dl-skov-revc-lt6.dtb \
+	imx6dl-solidsense.dtb \
+	imx6dl-ts4900.dtb \
+	imx6dl-ts7970.dtb \
+	imx6dl-tx6dl-comtft.dtb \
+	imx6dl-tx6s-8034.dtb \
+	imx6dl-tx6s-8034-mb7.dtb \
+	imx6dl-tx6s-8035.dtb \
+	imx6dl-tx6s-8035-mb7.dtb \
+	imx6dl-tx6u-801x.dtb \
+	imx6dl-tx6u-80xx-mb7.dtb \
+	imx6dl-tx6u-8033.dtb \
+	imx6dl-tx6u-8033-mb7.dtb \
+	imx6dl-tx6u-811x.dtb \
+	imx6dl-tx6u-81xx-mb7.dtb \
+	imx6dl-udoo.dtb \
+	imx6dl-victgo.dtb \
+	imx6dl-vicut1.dtb \
+	imx6dl-wandboard.dtb \
+	imx6dl-wandboard-revb1.dtb \
+	imx6dl-wandboard-revd1.dtb \
+	imx6dl-yapp4-draco.dtb \
+	imx6dl-yapp4-hydra.dtb \
+	imx6dl-yapp4-lynx.dtb \
+	imx6dl-yapp4-orion.dtb \
+	imx6dl-yapp4-phoenix.dtb \
+	imx6dl-yapp4-ursa.dtb \
+	imx6q-apalis-eval.dtb \
+	imx6q-apalis-eval-v1.2.dtb \
+	imx6q-apalis-ixora.dtb \
+	imx6q-apalis-ixora-v1.1.dtb \
+	imx6q-apalis-ixora-v1.2.dtb \
+	imx6q-apalis-v1.2-eval.dtb \
+	imx6q-apalis-v1.2-eval-v1.2.dtb \
+	imx6q-apalis-v1.2-ixora.dtb \
+	imx6q-apalis-v1.2-ixora-v1.1.dtb \
+	imx6q-apalis-v1.2-ixora-v1.2.dtb \
+	imx6q-apf6dev.dtb \
+	imx6q-arm2.dtb \
+	imx6q-b450v3.dtb \
+	imx6q-b650v3.dtb \
+	imx6q-b850v3.dtb \
+	imx6q-bosch-acc.dtb \
+	imx6q-cm-fx6.dtb \
+	imx6q-cubox-i.dtb \
+	imx6q-cubox-i-emmc-som-v15.dtb \
+	imx6q-cubox-i-som-v15.dtb \
+	imx6q-dfi-fs700-m60.dtb \
+	imx6q-dhcom-pdk2.dtb \
+	imx6q-display5-tianma-tm070-1280x768.dtb \
+	imx6q-dmo-edmqmx6.dtb \
+	imx6q-dms-ba16.dtb \
+	imx6q-ds.dtb \
+	imx6q-emcon-avari.dtb \
+	imx6q-evi.dtb \
+	imx6dl-b105pv2.dtb \
+	imx6dl-b105v2.dtb \
+	imx6dl-b125v2.dtb \
+	imx6dl-b125pv2.dtb \
+	imx6dl-b155v2.dtb \
+	imx6q-gk802.dtb \
+	imx6q-gw51xx.dtb \
+	imx6q-gw52xx.dtb \
+	imx6q-gw53xx.dtb \
+	imx6q-gw5400-a.dtb \
+	imx6q-gw54xx.dtb \
+	imx6q-gw551x.dtb \
+	imx6q-gw552x.dtb \
+	imx6q-gw553x.dtb \
+	imx6q-gw560x.dtb \
+	imx6q-gw5903.dtb \
+	imx6q-gw5904.dtb \
+	imx6q-gw5907.dtb \
+	imx6q-gw5910.dtb \
+	imx6q-gw5912.dtb \
+	imx6q-gw5913.dtb \
+	imx6q-h100.dtb \
+	imx6q-hummingboard.dtb \
+	imx6q-hummingboard-emmc-som-v15.dtb \
+	imx6q-hummingboard-som-v15.dtb \
+	imx6q-hummingboard2.dtb \
+	imx6q-hummingboard2-emmc-som-v15.dtb \
+	imx6q-hummingboard2-som-v15.dtb \
+	imx6q-icore.dtb \
+	imx6q-icore-mipi.dtb \
+	imx6q-icore-ofcap10.dtb \
+	imx6q-icore-ofcap12.dtb \
+	imx6q-icore-rqs.dtb \
+	imx6q-kontron-samx6i-ads2.dtb \
+	imx6q-kp-tpc.dtb \
+	imx6q-logicpd.dtb \
+	imx6q-lxr.dtb \
+	imx6q-marsboard.dtb \
+	imx6q-mba6a.dtb \
+	imx6q-mba6b.dtb \
+	imx6q-mccmon6.dtb \
+	imx6q-nitrogen6x.dtb \
+	imx6q-nitrogen6_max.dtb \
+	imx6q-nitrogen6_som2.dtb \
+	imx6q-novena.dtb \
+	imx6q-phytec-mira-rdk-emmc.dtb \
+	imx6q-phytec-mira-rdk-nand.dtb \
+	imx6q-phytec-pbab01.dtb \
+	imx6q-pico-dwarf.dtb \
+	imx6q-pico-hobbit.dtb \
+	imx6q-pico-nymph.dtb \
+	imx6q-pico-pi.dtb \
+	imx6q-pistachio.dtb \
+	imx6q-prti6q.dtb \
+	imx6q-prtwd2.dtb \
+	imx6q-rex-pro.dtb \
+	imx6q-sabreauto.dtb \
+	imx6q-sabrelite.dtb \
+	imx6q-sabresd.dtb \
+	imx6q-savageboard.dtb \
+	imx6q-sbc6x.dtb \
+	imx6q-skov-revc-lt2.dtb \
+	imx6q-skov-revc-lt6.dtb \
+	imx6q-skov-reve-mi1010ait-1cp1.dtb \
+	imx6q-solidsense.dtb \
+	imx6q-tbs2910.dtb \
+	imx6q-ts4900.dtb \
+	imx6q-ts7970.dtb \
+	imx6q-tx6q-1010.dtb \
+	imx6q-tx6q-1010-comtft.dtb \
+	imx6q-tx6q-1020.dtb \
+	imx6q-tx6q-1020-comtft.dtb \
+	imx6q-tx6q-1036.dtb \
+	imx6q-tx6q-1036-mb7.dtb \
+	imx6q-tx6q-10x0-mb7.dtb \
+	imx6q-tx6q-1110.dtb \
+	imx6q-tx6q-11x0-mb7.dtb \
+	imx6q-udoo.dtb \
+	imx6q-utilite-pro.dtb \
+	imx6q-var-dt6customboard.dtb \
+	imx6q-var-mx6customboard.dtb \
+	imx6q-vicut1.dtb \
+	imx6q-wandboard.dtb \
+	imx6q-wandboard-revb1.dtb \
+	imx6q-wandboard-revd1.dtb \
+	imx6q-yapp4-crux.dtb \
+	imx6q-yapp4-pegasus.dtb \
+	imx6q-zii-rdu2.dtb \
+	imx6qp-mba6b.dtb \
+	imx6qp-nitrogen6_max.dtb \
+	imx6qp-nitrogen6_som2.dtb \
+	imx6qp-phytec-mira-rdk-nand.dtb \
+	imx6qp-prtwd3.dtb \
+	imx6qp-sabreauto.dtb \
+	imx6qp-sabresd.dtb \
+	imx6qp-tx6qp-8037.dtb \
+	imx6qp-tx6qp-8037-mb7.dtb \
+	imx6qp-tx6qp-8137.dtb \
+	imx6qp-tx6qp-8137-mb7.dtb \
+	imx6qp-vicutp.dtb \
+	imx6qp-wandboard-revd1.dtb \
+	imx6qp-yapp4-crux-plus.dtb \
+	imx6qp-yapp4-pegasus-plus.dtb \
+	imx6qp-zii-rdu2.dtb \
+	imx6s-dhcom-drc02.dtb
+dtb-$(CONFIG_SOC_IMX6SL) += \
+	imx6sl-evk.dtb \
+	imx6sl-kobo-aura2.dtb \
+	imx6sl-tolino-shine2hd.dtb \
+	imx6sl-tolino-shine3.dtb \
+	imx6sl-tolino-vision.dtb \
+	imx6sl-tolino-vision5.dtb \
+	imx6sl-warp.dtb
+dtb-$(CONFIG_SOC_IMX6SLL) += \
+	imx6sll-evk.dtb \
+	imx6sll-kobo-clarahd.dtb \
+	imx6sll-kobo-clara2e-a.dtb \
+	imx6sll-kobo-clara2e-b.dtb \
+	imx6sll-kobo-librah2o.dtb
+dtb-$(CONFIG_SOC_IMX6SX) += \
+	imx6sx-nitrogen6sx.dtb \
+	imx6sx-sabreauto.dtb \
+	imx6sx-sdb-reva.dtb \
+	imx6sx-sdb-sai.dtb \
+	imx6sx-sdb.dtb \
+	imx6sx-sdb-mqs.dtb \
+	imx6sx-softing-vining-2000.dtb \
+	imx6sx-udoo-neo-basic.dtb \
+	imx6sx-udoo-neo-extended.dtb \
+	imx6sx-udoo-neo-full.dtb
+dtb-$(CONFIG_SOC_IMX6UL) += \
+	imx6ul-14x14-evk.dtb \
+	imx6ul-ccimx6ulsbcexpress.dtb \
+	imx6ul-ccimx6ulsbcpro.dtb \
+	imx6ul-geam.dtb \
+	imx6ul-isiot-emmc.dtb \
+	imx6ul-isiot-nand.dtb \
+	imx6ul-kontron-bl.dtb \
+	imx6ul-kontron-bl-43.dtb \
+	imx6ul-liteboard.dtb \
+	imx6ul-tqma6ul1-mba6ulx.dtb \
+	imx6ul-tqma6ul2-mba6ulx.dtb \
+	imx6ul-tqma6ul2l-mba6ulx.dtb \
+	imx6ul-opos6uldev.dtb \
+	imx6ul-pico-dwarf.dtb \
+	imx6ul-pico-hobbit.dtb \
+	imx6ul-pico-pi.dtb \
+	imx6ul-phytec-segin-ff-rdk-emmc.dtb \
+	imx6ul-phytec-segin-ff-rdk-nand.dtb \
+	imx6ul-prti6g.dtb \
+	imx6ul-tx6ul-0010.dtb \
+	imx6ul-tx6ul-0011.dtb \
+	imx6ul-tx6ul-mainboard.dtb \
+	imx6ul-var-som-concerto.dtb \
+	imx6ull-14x14-evk.dtb \
+	imx6ull-colibri-aster.dtb \
+	imx6ull-colibri-emmc-aster.dtb \
+	imx6ull-colibri-emmc-eval-v3.dtb \
+	imx6ull-colibri-emmc-iris.dtb \
+	imx6ull-colibri-emmc-iris-v2.dtb \
+	imx6ull-colibri-eval-v3.dtb \
+	imx6ull-colibri-iris.dtb \
+	imx6ull-colibri-iris-v2.dtb \
+	imx6ull-colibri-wifi-aster.dtb \
+	imx6ull-colibri-wifi-eval-v3.dtb \
+	imx6ull-colibri-wifi-iris.dtb \
+	imx6ull-colibri-wifi-iris-v2.dtb \
+	imx6ull-dhcom-drc02.dtb \
+	imx6ull-dhcom-pdk2.dtb \
+	imx6ull-dhcom-picoitx.dtb \
+	imx6ull-dhcor-maveo-box.dtb \
+	imx6ull-engicam-microgea-bmm.dtb \
+	imx6ull-engicam-microgea-gtw.dtb \
+	imx6ull-engicam-microgea-rmm.dtb \
+	imx6ull-jozacp.dtb \
+	imx6ull-kontron-bl.dtb \
+	imx6ull-myir-mys-6ulx-eval.dtb \
+	imx6ull-opos6uldev.dtb \
+	imx6ull-phytec-segin-ff-rdk-nand.dtb \
+	imx6ull-phytec-segin-ff-rdk-emmc.dtb \
+	imx6ull-phytec-segin-lc-rdk-nand.dtb \
+	imx6ull-phytec-tauri-emmc.dtb \
+	imx6ull-phytec-tauri-nand.dtb \
+	imx6ull-seeed-npi-dev-board-emmc.dtb \
+	imx6ull-seeed-npi-dev-board-nand.dtb \
+	imx6ull-tarragon-master.dtb \
+	imx6ull-tarragon-micro.dtb \
+	imx6ull-tarragon-slave.dtb \
+	imx6ull-tarragon-slavext.dtb \
+	imx6ull-tqma6ull2-mba6ulx.dtb \
+	imx6ull-tqma6ull2l-mba6ulx.dtb \
+	imx6ull-uti260b.dtb \
+	imx6ulz-14x14-evk.dtb \
+	imx6ulz-bsh-smm-m2.dtb
+dtb-$(CONFIG_SOC_IMX7D) += \
+	imx7d-cl-som-imx7.dtb \
+	imx7d-colibri-aster.dtb \
+	imx7d-colibri-emmc-aster.dtb \
+	imx7d-colibri-emmc-iris.dtb \
+	imx7d-colibri-emmc-iris-v2.dtb \
+	imx7d-colibri-emmc-eval-v3.dtb \
+	imx7d-colibri-eval-v3.dtb \
+	imx7d-colibri-iris.dtb \
+	imx7d-colibri-iris-v2.dtb \
+	imx7d-flex-concentrator.dtb \
+	imx7d-flex-concentrator-mfg.dtb \
+	imx7d-mba7.dtb \
+	imx7d-meerkat96.dtb \
+	imx7d-nitrogen7.dtb \
+	imx7d-pico-dwarf.dtb \
+	imx7d-pico-hobbit.dtb \
+	imx7d-pico-nymph.dtb \
+	imx7d-pico-pi.dtb \
+	imx7d-remarkable2.dtb \
+	imx7d-sbc-imx7.dtb \
+	imx7d-sdb.dtb \
+	imx7d-sdb-reva.dtb \
+	imx7d-sdb-sht11.dtb \
+	imx7d-smegw01.dtb \
+	imx7d-zii-rmu2.dtb \
+	imx7d-zii-rpu2.dtb \
+	imx7s-colibri-aster.dtb \
+	imx7s-colibri-eval-v3.dtb \
+	imx7s-colibri-iris.dtb \
+	imx7s-colibri-iris-v2.dtb \
+	imx7s-mba7.dtb \
+	imx7s-warp.dtb
+dtb-$(CONFIG_SOC_IMX7ULP) += \
+	imx7ulp-com.dtb \
+	imx7ulp-evk.dtb
+dtb-$(CONFIG_SOC_IMXRT) += \
+	imxrt1050-evk.dtb
diff --git a/arch/arm/boot/dts/e60k02.dtsi b/arch/arm/boot/dts/nxp/imx/e60k02.dtsi
index cfb239d5186a..0029c12f16c8 100644
--- a/arch/arm/boot/dts/e60k02.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/e60k02.dtsi
@@ -14,6 +14,10 @@
 #include <dt-bindings/input/input.h>
 
 / {
+	aliases {
+		mmc0 = &usdhc2;
+		mmc1 = &usdhc3;
+	};
 
 	chosen {
 		stdout-path = &uart1;
@@ -22,14 +26,14 @@
 	gpio_keys: gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			label = "Power";
 			gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			wakeup-source;
 		};
 
-		cover {
+		key-cover {
 			label = "Cover";
 			gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
 			linux,code = <SW_LID>;
@@ -41,7 +45,7 @@
 	leds: leds {
 		compatible = "gpio-leds";
 
-		on {
+		led {
 			label = "e60k02:white:on";
 			gpios = <&gpio5 7 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "timer";
@@ -104,7 +108,16 @@
 	clock-frequency = <100000>;
 	status = "okay";
 
-	/* TODO: CYTTSP5 touch controller at 0x24 */
+	touchscreen@24 {
+		compatible = "cypress,tt21000";
+		reg = <0x24>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cyttsp5_gpio>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&ldo5_reg>;
+	};
 
 	/* TODO: TPS65185 PMIC for E Ink at 0x68 */
 
@@ -118,7 +131,7 @@
 		compatible = "ricoh,rc5t619";
 		reg = <0x32>;
 		interrupt-parent = <&gpio5>;
-		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 		system-power-controller;
 
 		regulators {
@@ -302,6 +315,7 @@
 
 &usbotg1 {
 	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
 	disable-over-current;
 	srp-disable;
 	hnp-disable;
diff --git a/arch/arm/boot/dts/nxp/imx/e70k02.dtsi b/arch/arm/boot/dts/nxp/imx/e70k02.dtsi
new file mode 100644
index 000000000000..3bb11c5a6353
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/e70k02.dtsi
@@ -0,0 +1,353 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2021 Andreas Kemnade
+ * based on works
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * and
+ * Copyright (C) 2014 Ricoh Electronic Devices Co., Ltd
+ *
+ * Netronix E70K02 board common.
+ * This board is equipped with different SoCs and
+ * found in ebook-readers like the Kobo Clara HD (with i.MX6SLL) and
+ * the Tolino Shine 3 (with i.MX6SL)
+ */
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc3;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		key-cover {
+			label = "Cover";
+			gpios = <&gpio4 23 GPIO_ACTIVE_LOW>;
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+			wakeup-source;
+		};
+
+		key-pageup {
+			label = "PageUp";
+			gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PAGEUP>;
+		};
+
+		key-pagedown {
+			label = "PageDown";
+			gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PAGEDOWN>;
+		};
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+
+		led {
+			label = "e70k02:white:on";
+			gpios = <&gpio4 17 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	epd_pmic_supply: regulator-epd-pmic-in {
+		compatible = "regulator-fixed";
+		regulator-name = "epd_pmic_supply";
+		gpio = <&gpio2 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <20000>;
+	};
+
+	reg_wifi: regulator-wifi {
+		compatible = "regulator-fixed";
+		regulator-name = "SD3_SPWR";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		post-power-on-delay-ms = <20>;
+		reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	lm3630a: backlight@36 {
+		reg = <0x36>;
+		compatible = "ti,lm3630a";
+		enable-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0>;
+			led-sources = <0>;
+			label = "backlight_warm";
+			default-brightness = <0>;
+			max-brightness = <255>;
+		};
+
+		led@1 {
+			reg = <1>;
+			led-sources = <1>;
+			label = "backlight_cold";
+			default-brightness = <0>;
+			max-brightness = <255>;
+		};
+	};
+
+	/* TODO: KX122 acceleration sensor a 0x1e */
+
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	touchscreen@24 {
+		compatible = "cypress,tt21000";
+		reg = <0x24>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cyttsp5_gpio>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio4 18 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&ldo5_reg>;
+	};
+
+	sy7636: pmic@62 {
+		compatible = "silergy,sy7636a";
+		reg = <0x62>;
+		enable-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
+		vcom-en-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+		epd-pwr-good-gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&epd_pmic_supply>;
+
+		#thermal-sensor-cells = <0>;
+
+		regulators {
+			reg_epdpmic: vcom {
+				regulator-name = "vcom";
+			};
+		};
+	};
+
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	ricoh619: pmic@32 {
+		compatible = "ricoh,rc5t619";
+		reg = <0x32>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+		system-power-controller;
+
+		regulators {
+			dcdc1_reg: DCDC1 {
+				regulator-name = "DCDC1";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <900000>;
+					regulator-suspend-min-microvolt = <900000>;
+				};
+			};
+
+			/* Core3_3V3 */
+			dcdc2_reg: DCDC2 {
+				regulator-name = "DCDC2";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <3300000>;
+					regulator-suspend-min-microvolt = <3300000>;
+				};
+			};
+
+			dcdc3_reg: DCDC3 {
+				regulator-name = "DCDC3";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1140000>;
+					regulator-suspend-min-microvolt = <1140000>;
+				};
+			};
+
+			/* Core4_1V2 */
+			dcdc4_reg: DCDC4 {
+				regulator-name = "DCDC4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1140000>;
+					regulator-suspend-min-microvolt = <1140000>;
+				};
+			};
+
+			/* Core4_1V8 */
+			dcdc5_reg: DCDC5 {
+				regulator-name = "DCDC5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1700000>;
+					regulator-suspend-min-microvolt = <1700000>;
+				};
+			};
+
+			ldo1_reg: LDO1  {
+				regulator-name = "LDO1";
+				regulator-boot-on;
+			};
+
+			/* Core1_3V3 */
+			ldo2_reg: LDO2  {
+				regulator-name = "LDO2";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <3000000>;
+					regulator-suspend-min-microvolt = <3000000>;
+				};
+			};
+
+			/* Core5_1V2 */
+			ldo3_reg: LDO3  {
+				regulator-name = "LDO3";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "LDO4";
+				regulator-boot-on;
+			};
+
+			/* SPD_3V3 */
+			ldo5_reg: LDO5 {
+				regulator-name = "LDO5";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* DDR_0V6 */
+			ldo6_reg: LDO6 {
+				regulator-name = "LDO6";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* VDD_PWM */
+			ldo7_reg: LDO7 {
+				regulator-name = "LDO7";
+				regulator-boot-on;
+			};
+
+			/* ldo_1v8 */
+			ldo8_reg: LDO8 {
+				regulator-name = "LDO8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "LDO9";
+				regulator-boot-on;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "LDO10";
+				regulator-boot-on;
+			};
+
+			ldortc1_reg: LDORTC1  {
+				regulator-name = "LDORTC1";
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&snvs_rtc {
+	/* we are using the rtc in the pmic, not disabled in imx6sll.dtsi */
+	status = "disabled";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usdhc1 {
+	non-removable;
+	no-1-8-v;
+	status = "okay";
+};
+
+&usdhc3 {
+	vmmc-supply = <&reg_wifi>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	cap-power-off-card;
+	non-removable;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	disable-over-current;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx1-ads.dts b/arch/arm/boot/dts/nxp/imx/imx1-ads.dts
index 5833fb6f15d8..2c817c4a4c68 100644
--- a/arch/arm/boot/dts/imx1-ads.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx1-ads.dts
@@ -65,7 +65,7 @@
 	pinctrl-0 = <&pinctrl_weim>;
 	status = "okay";
 
-	nor: nor@0,0 {
+	nor: flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0 0x00000000 0x02000000>;
 		bank-width = <4>;
diff --git a/arch/arm/boot/dts/imx1-apf9328.dts b/arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts
index 77b21aa7a146..058e9435524f 100644
--- a/arch/arm/boot/dts/imx1-apf9328.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts
@@ -45,7 +45,7 @@
 	pinctrl-0 = <&pinctrl_weim>;
 	status = "okay";
 
-	nor: nor@0,0 {
+	nor: flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0 0x00000000 0x02000000>;
 		bank-width = <2>;
@@ -54,14 +54,12 @@
 		#size-cells = <1>;
 	};
 
-	eth: eth@4,c00000 {
+	eth: ethernet@4,c00000 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_eth>;
 		compatible = "davicom,dm9000";
-		reg = <
-			4 0x00c00000 0x2
-			4 0x00c00002 0x2
-		>;
+		reg = <4 0x00c00000 0x2>,
+		      <4 0x00c00002 0x2>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
 		fsl,weim-cs-timing = <0x0000c700 0x19190d01>;
diff --git a/arch/arm/boot/dts/imx1-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx1-pinfunc.h
index 050a1fc46a77..bd2e679cb26c 100644
--- a/arch/arm/boot/dts/imx1-pinfunc.h
+++ b/arch/arm/boot/dts/nxp/imx/imx1-pinfunc.h
@@ -26,9 +26,9 @@
  *                2 - 0
  *                3 - 1
  *
- * 'pin' is an integer between 0 and 0xbf. i.MX1 has 4 ports with 32 configurable
- * configurable pins each. 'pin' is PORT * 32 + PORT_PIN, PORT_PIN is the pin
- * number on the specific port (between 0 and 31).
+ * 'pin' is an integer between 0 and 0xbf. i.MX1 has 4 ports with 32
+ * configurable pins each. 'pin' is PORT * 32 + PORT_PIN, PORT_PIN is
+ * the pin number on the specific port (between 0 and 31).
  */
 
 #define MX1_PAD_A24__A24			0x00 0x004
diff --git a/arch/arm/boot/dts/imx1.dtsi b/arch/arm/boot/dts/nxp/imx/imx1.dtsi
index 9b940987864c..a1a89ccacf05 100644
--- a/arch/arm/boot/dts/imx1.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx1.dtsi
@@ -55,7 +55,7 @@
 
 	clocks {
 		clk32 {
-			compatible = "fsl,imx-clk32", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <32000>;
 		};
@@ -68,7 +68,7 @@
 		interrupt-parent = <&aitc>;
 		ranges;
 
-		aipi@200000 {
+		bus@200000 {
 			compatible = "fsl,aipi-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -134,7 +134,7 @@
 				clock-names = "ipg", "per";
 			};
 
-			dma: dma@209000 {
+			dma: dma-controller@209000 {
 				compatible = "fsl,imx1-dma";
 				reg = <0x00209000 0x1000>;
 				interrupts = <61 60>;
@@ -155,7 +155,7 @@
 			};
 		};
 
-		aipi@210000 {
+		bus@210000 {
 			compatible = "fsl,aipi-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -251,7 +251,7 @@
 			};
 		};
 
-		weim: weim@220000 {
+		weim: memory-controller@220000 {
 			#address-cells = <2>;
 			#size-cells = <1>;
 			compatible = "fsl,imx1-weim";
@@ -268,9 +268,12 @@
 			status = "disabled";
 		};
 
-		esram: esram@300000 {
+		esram: sram@300000 {
 			compatible = "mmio-sram";
 			reg = <0x00300000 0x20000>;
+			ranges = <0 0x00300000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-cpuimx25.dtsi
index 0703f62d10d1..93a6e4e680b4 100644
--- a/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-cpuimx25.dtsi
@@ -27,7 +27,7 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pcf8563@51 {
+	rtc@51 {
 		compatible = "nxp,pcf8563";
 		reg = <0x51>;
 	};
diff --git a/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
new file mode 100644
index 000000000000..6cddb2cc36fe
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ */
+
+#include "imx25-eukrea-mbimxsd25-baseboard.dts"
+
+/ {
+	model = "Eukrea MBIMXSD25 with the CMO-QVGA Display";
+	compatible = "eukrea,mbimxsd25-baseboard-cmo-qvga", "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
+
+	cmo_qvga: display {
+		model = "CMO-QVGA";
+		bits-per-pixel = <16>;
+		fsl,pcr = <0xcad08b80>;
+		bus-width = <18>;
+		display-timings {
+			native-mode = <&qvga_timings>;
+			qvga_timings: timing0 {
+				clock-frequency = <6500000>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <30>;
+				hfront-porch = <38>;
+				vback-porch = <20>;
+				vfront-porch = <3>;
+				hsync-len = <15>;
+				vsync-len = <4>;
+			};
+		};
+	};
+
+	reg_lcd_3v3: regulator-0 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
+		regulator-name = "lcd-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&iomuxc {
+	imx25-eukrea-mbimxsd25-baseboard-cmo-qvga {
+		pinctrl_reg_lcd_3v3: reg_lcd_3v3 {
+			fsl,pins = <MX25_PAD_PWM__GPIO_1_26 0x80000000>;
+		};
+	};
+};
+
+&lcdc {
+	display = <&cmo_qvga>;
+	fsl,lpccr = <0x00a903ff>;
+	lcd-supply = <&reg_lcd_3v3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
index 80a7f96de4c6..64b2ffac463b 100644
--- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
@@ -16,7 +16,7 @@
 		bus-width = <18>;
 		display-timings {
 			native-mode = <&dvi_svga_timings>;
-			dvi_svga_timings: 800x600 {
+			dvi_svga_timings: timing0 {
 				clock-frequency = <40000000>;
 				hactive = <800>;
 				vactive = <600>;
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
index 24027a1fb46d..fb074bfdaa8d 100644
--- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
@@ -16,7 +16,7 @@
 		bus-width = <18>;
 		display-timings {
 			native-mode = <&dvi_vga_timings>;
-			dvi_vga_timings: 640x480 {
+			dvi_vga_timings: timing0 {
 				clock-frequency = <31250000>;
 				hactive = <640>;
 				vactive = <480>;
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard.dts
index 3f38c2e60a74..c7207ea437c4 100644
--- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard.dts
@@ -13,12 +13,12 @@
 	model = "Eukrea MBIMXSD25";
 	compatible = "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpiokeys>;
 
-		bp1 {
+		button {
 			label = "BP1";
 			gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_MISC>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx25-karo-tx25.dts b/arch/arm/boot/dts/nxp/imx/imx25-karo-tx25.dts
new file mode 100644
index 000000000000..458b94d3d4ed
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx25-karo-tx25.dts
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Sascha Hauer, Pengutronix
+ */
+
+/dts-v1/;
+#include "imx25.dtsi"
+
+/ {
+	model = "Ka-Ro TX25";
+	compatible = "karo,imx25-tx25", "fsl,imx25";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	reg_fec_phy: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "fec-phy";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 9 0>;
+		enable-active-high;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x02000000 0x90000000 0x02000000>;
+	};
+};
+
+&iomuxc {
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX25_PAD_UART1_TXD__UART1_TXD 0x00000020
+			MX25_PAD_UART1_RXD__UART1_RXD 0x000000a0
+			MX25_PAD_UART1_CTS__UART1_CTS 0x00000060
+			MX25_PAD_UART1_RTS__UART1_RTS 0x000000e0
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX25_PAD_D11__GPIO_4_9		0x00000021 /* FEC PHY power on pin */
+			MX25_PAD_D13__GPIO_4_7		0x000000a1 /* FEC reset */
+			MX25_PAD_FEC_MDC__FEC_MDC	0x00000060
+			MX25_PAD_FEC_MDIO__FEC_MDIO	0x000001f0
+			MX25_PAD_FEC_TDATA0__FEC_TDATA0	0x00000060
+			MX25_PAD_FEC_TDATA1__FEC_TDATA1	0x00000060
+			MX25_PAD_FEC_TX_EN__FEC_TX_EN	0x00000060
+			MX25_PAD_FEC_RDATA0__FEC_RDATA0	0x000000c1
+			MX25_PAD_FEC_RDATA1__FEC_RDATA1	0x000000c0
+			MX25_PAD_FEC_RX_DV__FEC_RX_DV	0x000000c0
+			MX25_PAD_FEC_TX_CLK__FEC_TX_CLK	0x000000c0
+		>;
+	};
+
+	pinctrl_nfc: nfcgrp {
+		fsl,pins = <
+			MX25_PAD_NF_CE0__NF_CE0		0x00000001
+			MX25_PAD_NFWE_B__NFWE_B		0x80000000
+			MX25_PAD_NFRE_B__NFRE_B		0x80000000
+			MX25_PAD_NFALE__NFALE		0x80000000
+			MX25_PAD_NFCLE__NFCLE		0x80000000
+			MX25_PAD_NFWP_B__NFWP_B		0x80000000
+			MX25_PAD_NFRB__NFRB		0x000000e0
+			MX25_PAD_D7__D7			0x00000080
+			MX25_PAD_D6__D6			0x00000080
+			MX25_PAD_D5__D5			0x00000080
+			MX25_PAD_D4__D4			0x00000080
+			MX25_PAD_D3__D3			0x00000080
+			MX25_PAD_D2__D2			0x00000080
+			MX25_PAD_D1__D1			0x00000000
+			MX25_PAD_D0__D0			0x00000080
+		>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-reset-gpios = <&gpio3 7 GPIO_ACTIVE_LOW>;
+	phy-mode = "rmii";
+	phy-supply = <&reg_fec_phy>;
+	status = "okay";
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
+	nand-on-flash-bbt;
+	nand-ecc-mode = "hw";
+	nand-bus-width = <8>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts
index fb66884d8a2f..dd176fb54e58 100644
--- a/arch/arm/boot/dts/imx25-pdk.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts
@@ -16,45 +16,35 @@
 		reg = <0x80000000 0x4000000>;
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_fec_3v3: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "fec-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio2 3 0>;
-			enable-active-high;
-		};
+	reg_fec_3v3: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "fec-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 3 0>;
+		enable-active-high;
+	};
 
-		reg_2p5v: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "2P5V";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-		};
+	reg_2p5v: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+	};
 
-		reg_3p3v: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
+	reg_3p3v: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 
-		reg_can_3v3: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "can-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio4 6 0>;
-		};
+	reg_can_3v3: regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "can-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 6 0>;
 	};
 
 	sound {
@@ -78,7 +68,7 @@
 		bus-width = <18>;
 		display-timings {
 			native-mode = <&wvga_timings>;
-			wvga_timings: 640x480 {
+			wvga_timings: timing0 {
 				hactive = <640>;
 				vactive = <480>;
 				hback-porch = <45>;
@@ -132,6 +122,7 @@
 	codec: sgtl5000@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		clocks = <&clks 129>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_3p3v>;
diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx25-pinfunc.h
index 908caf810351..908caf810351 100644
--- a/arch/arm/boot/dts/imx25-pinfunc.h
+++ b/arch/arm/boot/dts/nxp/imx/imx25-pinfunc.h
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/nxp/imx/imx25.dtsi
index fdcca82c9986..82601a4b7b4b 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx25.dtsi
@@ -62,13 +62,23 @@
 
 	clocks {
 		osc {
-			compatible = "fsl,imx-osc", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <24000000>;
 		};
 	};
 
-	soc {
+	usbphy0: usb-phy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+
+	usbphy1: usb-phy1 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+
+	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
@@ -93,7 +103,7 @@
 				compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
 				reg = <0x43f80000 0x4000>;
 				clocks = <&clks 48>;
-				clock-names = "";
+				clock-names = "ipg";
 				interrupts = <3>;
 				status = "disabled";
 			};
@@ -104,7 +114,7 @@
 				compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
 				reg = <0x43f84000 0x4000>;
 				clocks = <&clks 48>;
-				clock-names = "";
+				clock-names = "ipg";
 				interrupts = <10>;
 				status = "disabled";
 			};
@@ -151,7 +161,7 @@
 				compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
 				reg = <0x43f98000 0x4000>;
 				clocks = <&clks 48>;
-				clock-names = "";
+				clock-names = "ipg";
 				interrupts = <4>;
 				status = "disabled";
 			};
@@ -178,12 +188,9 @@
 			};
 
 			kpp: kpp@43fa8000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
 				compatible = "fsl,imx25-kpp", "fsl,imx21-kpp";
 				reg = <0x43fa8000 0x4000>;
 				clocks = <&clks 102>;
-				clock-names = "";
 				interrupts = <24>;
 				status = "disabled";
 			};
@@ -200,7 +207,7 @@
 			};
 		};
 
-		spba@50000000 {
+		spba-bus@50000000 {
 			compatible = "fsl,spba-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -515,7 +522,7 @@
 				#interrupt-cells = <2>;
 			};
 
-			sdma: sdma@53fd4000 {
+			sdma: dma-controller@53fd4000 {
 				compatible = "fsl,imx25-sdma";
 				reg = <0x53fd4000 0x4000>;
 				clocks = <&clks 112>, <&clks 68>;
@@ -529,7 +536,6 @@
 				compatible = "fsl,imx25-wdt", "fsl,imx21-wdt";
 				reg = <0x53fdc000 0x4000>;
 				clocks = <&clks 126>;
-				clock-names = "";
 				interrupts = <55>;
 			};
 
@@ -543,7 +549,7 @@
 			};
 
 			iim: efuse@53ff0000 {
-				compatible = "fsl,imx25-iim", "fsl,imx27-iim";
+				compatible = "fsl,imx25-iim";
 				reg = <0x53ff0000 0x4000>;
 				interrupts = <19>;
 				clocks = <&clks 99>;
@@ -583,10 +589,9 @@
 			};
 
 			dryice@53ffc000 {
-				compatible = "fsl,imx25-dryice", "fsl,imx25-rtc";
+				compatible = "fsl,imx25-rtc";
 				reg = <0x53ffc000 0x4000>;
 				clocks = <&clks 81>;
-				clock-names = "ipg";
 				interrupts = <25 56>;
 			};
 		};
@@ -594,16 +599,19 @@
 		iram: sram@78000000 {
 			compatible = "mmio-sram";
 			reg = <0x78000000 0x20000>;
+			ranges = <0 0x78000000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 		};
 
-		emi@80000000 {
+		bus@80000000 {
 			compatible = "fsl,emi-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0x80000000 0x3b002000>;
 			ranges;
 
-			nfc: nand@bb000000 {
+			nfc: nand-controller@bb000000 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 
@@ -616,22 +624,4 @@
 			};
 		};
 	};
-
-	usbphy {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usbphy0: usb-phy@0 {
-			reg = <0>;
-			compatible = "usb-nop-xceiv";
-			#phy-cells = <0>;
-		};
-
-		usbphy1: usb-phy@1 {
-			reg = <1>;
-			compatible = "usb-nop-xceiv";
-			#phy-cells = <0>;
-		};
-	};
 };
diff --git a/arch/arm/boot/dts/imx27-apf27.dts b/arch/arm/boot/dts/nxp/imx/imx27-apf27.dts
index 745d5d409952..745d5d409952 100644
--- a/arch/arm/boot/dts/imx27-apf27.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx27-apf27.dts
diff --git a/arch/arm/boot/dts/imx27-apf27dev.dts b/arch/arm/boot/dts/nxp/imx/imx27-apf27dev.dts
index 6f1e8ce9e76e..849306cb4532 100644
--- a/arch/arm/boot/dts/imx27-apf27dev.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx27-apf27dev.dts
@@ -16,7 +16,7 @@
 		fsl,pcr = <0xfae80083>;	/* non-standard but required */
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: 800x480 {
+			timing0: timing0 {
 				clock-frequency = <33000033>;
 				hactive = <800>;
 				vactive = <480>;
@@ -47,26 +47,19 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		user {
+		led-user {
 			label = "Heartbeat";
 			gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_max5821: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "max5821-reg";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-			regulator-always-on;
-		};
+	reg_max5821: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "max5821-reg";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi b/arch/arm/boot/dts/nxp/imx/imx27-eukrea-cpuimx27.dtsi
index 74110bbcd9d4..c7e923584878 100644
--- a/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx27-eukrea-cpuimx27.dtsi
@@ -33,7 +33,7 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pcf8563@51 {
+	rtc@51 {
 		compatible = "nxp,pcf8563";
 		reg = <0x51>;
 	};
@@ -90,7 +90,7 @@
 &weim {
 	status = "okay";
 
-	nor: nor@0,0 {
+	nor: flash@0,0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "cfi-flash";
diff --git a/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts b/arch/arm/boot/dts/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts
index 9c3ec82ec7e5..d78793601306 100644
--- a/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts
@@ -16,7 +16,7 @@
 
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: 320x240 {
+			timing0: timing0 {
 				clock-frequency = <6500000>;
 				hactive = <320>;
 				vactive = <240>;
@@ -54,22 +54,15 @@
 		};
 	};
 
-	regulators {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "simple-bus";
-
-		reg_lcd: regulator@0 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_lcdreg>;
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "LCD";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 25 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	reg_lcd: regulator-0 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcdreg>;
+		regulator-name = "LCD";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx27-pdk.dts b/arch/arm/boot/dts/nxp/imx/imx27-pdk.dts
index 35123b7cb6b3..21d436972aa4 100644
--- a/arch/arm/boot/dts/imx27-pdk.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx27-pdk.dts
@@ -14,18 +14,12 @@
 		reg = <0xa0000000 0x08000000>;
 	};
 
-	usbphy {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usbphy0: usbphy@0 {
-			compatible = "usb-nop-xceiv";
-			reg = <0>;
-			clocks = <&clks IMX27_CLK_DUMMY>;
-			clock-names = "main_clk";
-			#phy-cells = <0>;
-		};
+
+	usbphy0: usbphy {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX27_CLK_DUMMY>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-rdk.dts
index 188639738dc3..27c93b9fe049 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-rdk.dts
@@ -19,7 +19,7 @@
 		fsl,pcr = <0xf0c88080>;	/* non-standard but required */
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: 640x480 {
+			timing0: timing0 {
 				hactive = <640>;
 				vactive = <480>;
 				hback-porch = <112>;
@@ -33,19 +33,12 @@
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3v3: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3V3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
+	reg_3v3: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
 	};
 };
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-som.dtsi
new file mode 100644
index 000000000000..31b3fc972abb
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-som.dtsi
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Sascha Hauer, Uwe Kleine-König, Steffen Trumtrar
+ * and Markus Pargmann, Pengutronix
+ */
+
+/dts-v1/;
+#include "imx27.dtsi"
+
+/ {
+	model = "Phytec pca100";
+	compatible = "phytec,imx27-pca100", "fsl,imx27";
+
+	memory@a0000000 {
+		device_type = "memory";
+		reg = <0xa0000000 0x08000000>; /* 128MB */
+	};
+
+	usbotgphy: usbotgphy {
+		compatible = "usb-nop-xceiv";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotgphy>;
+		reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
+		#phy-cells = <0>;
+	};
+
+	usbh2phy: usbh2phy {
+		compatible = "usb-nop-xceiv";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh2phy>;
+		reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+		#phy-cells = <0>;
+	};
+};
+
+&cspi1 {
+	cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>,
+		   <&gpio4 27 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	eeprom@52 {
+		compatible = "atmel,24c32";
+		pagesize = <32>;
+		reg = <0x52>;
+	};
+};
+
+&iomuxc {
+	imx27-phycard-s-som {
+		pinctrl_fec1: fec1grp {
+			fsl,pins = <
+				MX27_PAD_SD3_CMD__FEC_TXD0 0x0
+				MX27_PAD_SD3_CLK__FEC_TXD1 0x0
+				MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
+				MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
+				MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
+				MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
+				MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
+				MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
+				MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
+				MX27_PAD_ATA_DATA7__FEC_MDC 0x0
+				MX27_PAD_ATA_DATA8__FEC_CRS 0x0
+				MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
+				MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
+				MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
+				MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
+				MX27_PAD_ATA_DATA13__FEC_COL 0x0
+				MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
+				MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
+				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+			>;
+		};
+
+		pinctrl_nfc: nfcgrp {
+			fsl,pins = <
+				MX27_PAD_NFRB__NFRB 0x0
+				MX27_PAD_NFCLE__NFCLE 0x0
+				MX27_PAD_NFWP_B__NFWP_B 0x0
+				MX27_PAD_NFCE_B__NFCE_B 0x0
+				MX27_PAD_NFALE__NFALE 0x0
+				MX27_PAD_NFRE_B__NFRE_B 0x0
+				MX27_PAD_NFWE_B__NFWE_B 0x0
+			>;
+		};
+
+		pinctrl_usbotgphy: usbotgphygrp {
+			fsl,pins = <
+				MX27_PAD_USBH1_RCV__GPIO2_25		0x1 /* reset gpio */
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX27_PAD_USBOTG_CLK__USBOTG_CLK		0x0
+				MX27_PAD_USBOTG_DIR__USBOTG_DIR		0x0
+				MX27_PAD_USBOTG_NXT__USBOTG_NXT		0x0
+				MX27_PAD_USBOTG_STP__USBOTG_STP		0x0
+				MX27_PAD_USBOTG_DATA0__USBOTG_DATA0	0x0
+				MX27_PAD_USBOTG_DATA1__USBOTG_DATA1	0x0
+				MX27_PAD_USBOTG_DATA2__USBOTG_DATA2	0x0
+				MX27_PAD_USBOTG_DATA3__USBOTG_DATA3	0x0
+				MX27_PAD_USBOTG_DATA4__USBOTG_DATA4	0x0
+				MX27_PAD_USBOTG_DATA5__USBOTG_DATA5	0x0
+				MX27_PAD_USBOTG_DATA6__USBOTG_DATA6	0x0
+				MX27_PAD_USBOTG_DATA7__USBOTG_DATA7	0x0
+			>;
+		};
+
+		pinctrl_usbh2phy: usbh2phygrp {
+			fsl,pins = <
+				MX27_PAD_USBH1_SUSP__GPIO2_22		0x0 /* reset gpio */
+			>;
+		};
+
+		pinctrl_usbh2: usbh2grp {
+			fsl,pins = <
+				MX27_PAD_USBH2_CLK__USBH2_CLK		0x0
+				MX27_PAD_USBH2_DIR__USBH2_DIR		0x0
+				MX27_PAD_USBH2_NXT__USBH2_NXT		0x0
+				MX27_PAD_USBH2_STP__USBH2_STP		0x0
+				MX27_PAD_CSPI2_SCLK__USBH2_DATA0	0x0
+				MX27_PAD_CSPI2_MOSI__USBH2_DATA1	0x0
+				MX27_PAD_CSPI2_MISO__USBH2_DATA2	0x0
+				MX27_PAD_CSPI2_SS1__USBH2_DATA3		0x0
+				MX27_PAD_CSPI2_SS2__USBH2_DATA4		0x0
+				MX27_PAD_CSPI1_SS2__USBH2_DATA5		0x0
+				MX27_PAD_CSPI2_SS0__USBH2_DATA6		0x0
+				MX27_PAD_USBH2_DATA7__USBH2_DATA7	0x0
+			>;
+		};
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	phy_type = "ulpi";
+	phys = <&usbotgphy>;
+	status = "okay";
+};
+
+&usbh2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh2>;
+	phy_type = "ulpi";
+	phys = <&usbh2phy>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts
index 344e77790152..b8048e12e3d9 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts
@@ -19,7 +19,7 @@
 
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: 240x320 {
+			timing0: timing0 {
 				clock-frequency = <5500000>;
 				hactive = <240>;
 				vactive = <320>;
@@ -37,29 +37,23 @@
 		};
 	};
 
-	regulators {
-		regulator@2 {
-			compatible = "regulator-fixed";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_csien>;
-			reg = <2>;
-			regulator-name = "CSI_EN";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio2 24 GPIO_ACTIVE_LOW>;
-			regulator-always-on;
-		};
+	regulator-2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_csien>;
+		regulator-name = "CSI_EN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 24 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
 	};
 
-	usbphy {
-		usbphy2: usbphy@2 {
-			compatible = "usb-nop-xceiv";
-			reg = <2>;
-			vcc-supply = <&reg_5v0>;
-			clocks = <&clks IMX27_CLK_DUMMY>;
-			clock-names = "main_clk";
-			#phy-cells = <0>;
-		};
+	usbphy2: usbphy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_5v0>;
+		clocks = <&clks IMX27_CLK_DUMMY>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi
index 3d10273177e9..e958d7286ae9 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi
@@ -15,41 +15,27 @@
 		reg = <0xa0000000 0x08000000>;
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3v3: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3V3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
+	reg_3v3: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 
-		reg_5v0: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "5V0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
+	reg_5v0: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
 	};
 
-	usbphy {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usbphy0: usbphy@0 {
-			compatible = "usb-nop-xceiv";
-			reg = <0>;
-			vcc-supply = <&sw3_reg>;
-			clocks = <&clks IMX27_CLK_DUMMY>;
-			clock-names = "main_clk";
-			#phy-cells = <0>;
-		};
+
+	usbphy0: usbphy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&sw3_reg>;
+		clocks = <&clks IMX27_CLK_DUMMY>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
 	};
 };
 
@@ -57,12 +43,12 @@
 	status = "okay";
 
 	/* SSI0 <=> PINS_4 (MC13783 Audio) */
-	ssi0 {
+	mux-ssi0 {
 		fsl,audmux-port = <0>;
 		fsl,port-config = <0xcb205000>;
 	};
 
-	pins4 {
+	mux-pins4 {
 		fsl,audmux-port = <2>;
 		fsl,port-config = <0x00001000>;
 	};
@@ -188,13 +174,13 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	at24@52 {
+	eeprom@52 {
 		compatible = "atmel,24c32";
 		pagesize = <32>;
 		reg = <0x52>;
 	};
 
-	pcf8563@51 {
+	rtc@51 {
 		compatible = "nxp,pcf8563";
 		reg = <0x51>;
 	};
@@ -322,7 +308,7 @@
 &weim {
 	status = "okay";
 
-	nor: nor@0,0 {
+	nor: flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0 0x00000000 0x02000000>;
 		bank-width = <2>;
diff --git a/arch/arm/boot/dts/imx27-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx27-pinfunc.h
index 1514d80a3112..75aea0c701d4 100644
--- a/arch/arm/boot/dts/imx27-pinfunc.h
+++ b/arch/arm/boot/dts/nxp/imx/imx27-pinfunc.h
@@ -26,9 +26,9 @@
  *                2 - 0
  *                3 - 1
  *
- * 'pin' is an integer between 0 and 0xbf. imx27 has 6 ports with 32 configurable
- * configurable pins each. 'pin' is PORT * 32 + PORT_PIN, PORT_PIN is the pin
- * number on the specific port (between 0 and 31).
+ * 'pin' is an integer between 0 and 0xbf. imx27 has 6 ports with 32
+ * configurable pins each. 'pin' is PORT * 32 + PORT_PIN, PORT_PIN is
+ * the pin number on the specific port (between 0 and 31).
  */
 
 #define MX27_PAD_USBH2_CLK__USBH2_CLK                      0x00 0x000
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/nxp/imx/imx27.dtsi
index fd525c3b16fa..989b7659b669 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx27.dtsi
@@ -74,21 +74,21 @@
 		};
 	};
 
-	soc {
+	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
 		interrupt-parent = <&aitc>;
 		ranges;
 
-		aipi@10000000 { /* AIPI1 */
+		aipi1: bus@10000000 { /* AIPI1 */
 			compatible = "fsl,aipi-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0x10000000 0x20000>;
 			ranges;
 
-			dma: dma@10001000 {
+			dma: dma-controller@10001000 {
 				compatible = "fsl,imx27-dma";
 				reg = <0x10001000 0x1000>;
 				interrupts = <32>;
@@ -96,7 +96,7 @@
 					 <&clks IMX27_CLK_DMA_AHB_GATE>;
 				clock-names = "ipg", "ahb";
 				#dma-cells = <1>;
-				#dma-channels = <16>;
+				dma-channels = <16>;
 			};
 
 			wdog: watchdog@10002000 {
@@ -453,7 +453,7 @@
 			};
 		};
 
-		aipi@10020000 { /* AIPI2 */
+		aipi2: bus@10020000 { /* AIPI2 */
 			compatible = "fsl,aipi-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -534,7 +534,7 @@
 				clock-names = "ipg", "ahb";
 			};
 
-			clks: ccm@10027000{
+			clks: ccm@10027000 {
 				compatible = "fsl,imx27-ccm";
 				reg = <0x10027000 0x1000>;
 				#clock-cells = <1>;
@@ -568,7 +568,7 @@
 			status = "disabled";
 		};
 
-		weim: weim@d8002000 {
+		weim: memory-controller@d8002000 {
 			#address-cells = <2>;
 			#size-cells = <1>;
 			compatible = "fsl,imx27-weim";
@@ -588,6 +588,9 @@
 		iram: sram@ffff4c00 {
 			compatible = "mmio-sram";
 			reg = <0xffff4c00 0xb400>;
+			ranges = <0 0xffff4c00 0xb400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx31-bug.dts b/arch/arm/boot/dts/nxp/imx/imx31-bug.dts
index d87eee3f9b3c..d87eee3f9b3c 100644
--- a/arch/arm/boot/dts/imx31-bug.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx31-bug.dts
diff --git a/arch/arm/boot/dts/imx31-lite.dts b/arch/arm/boot/dts/nxp/imx/imx31-lite.dts
index d17abdfb6330..630f8fa69ba8 100644
--- a/arch/arm/boot/dts/imx31-lite.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx31-lite.dts
@@ -157,7 +157,7 @@
 &weim {
 	status = "okay";
 
-	nor@0,0 {
+	flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0 0x0 0x200000>;
 		bank-width = <2>;
diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/nxp/imx/imx31.dtsi
index 948d2a543f8d..8541a666747a 100644
--- a/arch/arm/boot/dts/imx31.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx31.dtsi
@@ -48,7 +48,7 @@
 		reg = <0x68000000 0x100000>;
 	};
 
-	soc {
+	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
@@ -63,7 +63,7 @@
 			ranges = <0 0x1fffc000 0x4000>;
 		};
 
-		bus@43f00000 { /* AIPS1 */
+		aips1: bus@43f00000 { /* AIPS1 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -166,7 +166,7 @@
 			};
 		};
 
-		spba@50000000 {
+		spba-bus@50000000 {
 			compatible = "fsl,spba-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -218,7 +218,7 @@
 			};
 
 			iim: efuse@5001c000 {
-				compatible = "fsl,imx31-iim", "fsl,imx27-iim";
+				compatible = "fsl,imx31-iim";
 				reg = <0x5001c000 0x1000>;
 				interrupts = <19>;
 				clocks = <&clks 25>;
@@ -232,7 +232,7 @@
 			reg = <0x53f00000 0x100000>;
 			ranges;
 
-			clks: ccm@53f80000{
+			clks: ccm@53f80000 {
 				compatible = "fsl,imx31-ccm";
 				reg = <0x53f80000 0x4000>;
 				interrupts = <31>, <53>;
@@ -297,7 +297,7 @@
 				#interrupt-cells = <2>;
 			};
 
-			sdma: sdma@53fd4000 {
+			sdma: dma-controller@53fd4000 {
 				compatible = "fsl,imx31-sdma";
 				reg = <0x53fd4000 0x4000>;
 				interrupts = <34>;
@@ -340,7 +340,7 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			nfc: nand@b8000000 {
+			nfc: nand-controller@b8000000 {
 				compatible = "fsl,imx31-nand", "fsl,imx27-nand";
 				reg = <0xb8000000 0x1000>;
 				interrupts = <33>;
@@ -352,7 +352,7 @@
 				status = "disabled";
 			};
 
-			weim: weim@b8002000 {
+			weim: memory-controller@b8002000 {
 				compatible = "fsl,imx31-weim", "fsl,imx27-weim";
 				reg = <0xb8002000 0x1000>;
 				clocks = <&clks 56>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx35-eukrea-cpuimx35.dtsi b/arch/arm/boot/dts/nxp/imx/imx35-eukrea-cpuimx35.dtsi
new file mode 100644
index 000000000000..0064b5452b54
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx35-eukrea-cpuimx35.dtsi
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ */
+
+#include "imx35.dtsi"
+
+/ {
+	model = "Eukrea CPUIMX35";
+	compatible = "eukrea,cpuimx35", "fsl,imx35";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x8000000>; /* 128M */
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	tsc2007: tsc2007@48 {
+		compatible = "ti,tsc2007";
+		gpios = <&gpio3 2 0>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <0x2 0x8>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tsc2007_1>;
+		reg = <0x48>;
+		ti,x-plate-ohms = <180>;
+	};
+};
+
+&iomuxc {
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX35_PAD_FEC_TX_CLK__FEC_TX_CLK		0x80000000
+			MX35_PAD_FEC_RX_CLK__FEC_RX_CLK		0x80000000
+			MX35_PAD_FEC_RX_DV__FEC_RX_DV		0x80000000
+			MX35_PAD_FEC_COL__FEC_COL		0x80000000
+			MX35_PAD_FEC_RDATA0__FEC_RDATA_0	0x80000000
+			MX35_PAD_FEC_TDATA0__FEC_TDATA_0	0x80000000
+			MX35_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+			MX35_PAD_FEC_MDC__FEC_MDC		0x80000000
+			MX35_PAD_FEC_MDIO__FEC_MDIO		0x80000000
+			MX35_PAD_FEC_TX_ERR__FEC_TX_ERR		0x80000000
+			MX35_PAD_FEC_RX_ERR__FEC_RX_ERR		0x80000000
+			MX35_PAD_FEC_CRS__FEC_CRS		0x80000000
+			MX35_PAD_FEC_RDATA1__FEC_RDATA_1	0x80000000
+			MX35_PAD_FEC_TDATA1__FEC_TDATA_1	0x80000000
+			MX35_PAD_FEC_RDATA2__FEC_RDATA_2	0x80000000
+			MX35_PAD_FEC_TDATA2__FEC_TDATA_2	0x80000000
+			MX35_PAD_FEC_RDATA3__FEC_RDATA_3	0x80000000
+			MX35_PAD_FEC_TDATA3__FEC_TDATA_3	0x80000000
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX35_PAD_I2C1_CLK__I2C1_SCL		0x80000000
+			MX35_PAD_I2C1_DAT__I2C1_SDA		0x80000000
+		>;
+	};
+
+	pinctrl_tsc2007_1: tsc2007-1-grp {
+		fsl,pins = <MX35_PAD_ATA_DA2__GPIO3_2 0x80000000>;
+	};
+};
+
+&nfc {
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx35-eukrea-mbimxsd35-baseboard.dts b/arch/arm/boot/dts/nxp/imx/imx35-eukrea-mbimxsd35-baseboard.dts
new file mode 100644
index 000000000000..e7835a769bbc
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx35-eukrea-mbimxsd35-baseboard.dts
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx35-eukrea-cpuimx35.dtsi"
+
+/ {
+	model = "Eukrea CPUIMX35";
+	compatible = "eukrea,mbimxsd35-baseboard", "eukrea,cpuimx35", "fsl,imx35";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bp1>;
+
+		button {
+			label = "BP1";
+			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_MISC>;
+			wakeup-source;
+			linux,input-type = <1>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led1>;
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	sound {
+		compatible = "eukrea,asoc-tlv320";
+		eukrea,model = "imx35-eukrea-tlv320aic23";
+		ssi-controller = <&ssi1>;
+		fsl,mux-int-port = <1>;
+		fsl,mux-ext-port = <4>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&i2c1 {
+	tlv320aic23: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+	};
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS	0x80000000
+			MX35_PAD_STXD4__AUDMUX_AUD4_TXD		0x80000000
+			MX35_PAD_SRXD4__AUDMUX_AUD4_RXD		0x80000000
+			MX35_PAD_SCK4__AUDMUX_AUD4_TXC		0x80000000
+		>;
+	};
+
+	pinctrl_bp1: bp1grp {
+		fsl,pins = <MX35_PAD_LD19__GPIO3_25  0x80000000>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX35_PAD_SD1_CMD__ESDHC1_CMD		0x80000000
+			MX35_PAD_SD1_CLK__ESDHC1_CLK		0x80000000
+			MX35_PAD_SD1_DATA0__ESDHC1_DAT0		0x80000000
+			MX35_PAD_SD1_DATA1__ESDHC1_DAT1		0x80000000
+			MX35_PAD_SD1_DATA2__ESDHC1_DAT2		0x80000000
+			MX35_PAD_SD1_DATA3__ESDHC1_DAT3		0x80000000
+			MX35_PAD_LD18__GPIO3_24			0x80000000 /* CD */
+		>;
+	};
+
+	pinctrl_led1: led1grp {
+		fsl,pins = <MX35_PAD_LD23__GPIO3_29  0x80000000>;
+	};
+
+	pinctrl_reg_lcd_3v3: reg-lcd-3v3grp {
+		fsl,pins = <MX35_PAD_D3_CLS__GPIO1_4 0x80000000>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX35_PAD_TXD1__UART1_TXD_MUX		0x1c5
+			MX35_PAD_RXD1__UART1_RXD_MUX		0x1c5
+			MX35_PAD_CTS1__UART1_CTS		0x1c5
+			MX35_PAD_RTS1__UART1_RTS		0x1c5
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX35_PAD_RXD2__UART2_RXD_MUX		0x1c5
+			MX35_PAD_TXD2__UART2_TXD_MUX		0x1c5
+			MX35_PAD_RTS2__UART2_RTS		0x1c5
+			MX35_PAD_CTS2__UART2_CTS		0x1c5
+		>;
+	};
+};
+
+&ssi1 {
+	codec-handle = <&tlv320aic23>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbhost1 {
+	phy_type = "serial";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbotg {
+	phy_type = "utmi";
+	dr_mode = "otg";
+	external-vbus-divider;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx35-pdk.dts b/arch/arm/boot/dts/nxp/imx/imx35-pdk.dts
new file mode 100644
index 000000000000..a2baf8202f94
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx35-pdk.dts
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+// Copyright 2014 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+#include "imx35.dtsi"
+
+/ {
+	model = "Freescale i.MX35 Product Development Kit";
+	compatible = "fsl,imx35-pdk", "fsl,imx35";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x8000000>,
+		      <0x90000000 0x8000000>;
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX35_PAD_SD1_CMD__ESDHC1_CMD		0x80000000
+			MX35_PAD_SD1_CLK__ESDHC1_CLK		0x80000000
+			MX35_PAD_SD1_DATA0__ESDHC1_DAT0		0x80000000
+			MX35_PAD_SD1_DATA1__ESDHC1_DAT1		0x80000000
+			MX35_PAD_SD1_DATA2__ESDHC1_DAT2		0x80000000
+			MX35_PAD_SD1_DATA3__ESDHC1_DAT3		0x80000000
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX35_PAD_TXD1__UART1_TXD_MUX		0x1c5
+			MX35_PAD_RXD1__UART1_RXD_MUX		0x1c5
+			MX35_PAD_CTS1__UART1_CTS		0x1c5
+			MX35_PAD_RTS1__UART1_RTS		0x1c5
+		>;
+	};
+};
+
+&nfc {
+	nand-bus-width = <16>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx35-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx35-pinfunc.h
index 9d6cc9564b72..9d6cc9564b72 100644
--- a/arch/arm/boot/dts/imx35-pinfunc.h
+++ b/arch/arm/boot/dts/nxp/imx/imx35-pinfunc.h
diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/nxp/imx/imx35.dtsi
index 8e41c8b7bd70..111d7c0331f5 100644
--- a/arch/arm/boot/dts/imx35.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx35.dtsi
@@ -156,7 +156,7 @@
 				status = "disabled";
 			};
 
-			iomuxc: iomuxc@43fac000 {
+			iomuxc: pinctrl@43fac000 {
 				compatible = "fsl,imx35-iomuxc";
 				reg = <0x43fac000 0x4000>;
 			};
@@ -284,7 +284,7 @@
 				#interrupt-cells = <2>;
 			};
 
-			sdma: sdma@53fd4000 {
+			sdma: dma-controller@53fd4000 {
 				compatible = "fsl,imx35-sdma";
 				reg = <0x53fd4000 0x4000>;
 				clocks = <&clks 9>, <&clks 65>;
@@ -298,7 +298,6 @@
 				compatible = "fsl,imx35-wdt", "fsl,imx21-wdt";
 				reg = <0x53fdc000 0x4000>;
 				clocks = <&clks 74>;
-				clock-names = "";
 				interrupts = <55>;
 			};
 
@@ -364,7 +363,7 @@
 			reg = <0x80000000 0x40000000>;
 			ranges;
 
-			nfc: nand@bb000000 {
+			nfc: nand-controller@bb000000 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				compatible = "fsl,imx35-nand", "fsl,imx25-nand";
@@ -375,7 +374,7 @@
 				status = "disabled";
 			};
 
-			weim: weim@b8002000 {
+			weim: memory-controller@b8002000 {
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clocks = <&clks 0>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx50-evk.dts b/arch/arm/boot/dts/nxp/imx/imx50-evk.dts
new file mode 100644
index 000000000000..f40b0d5fdb85
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx50-evk.dts
@@ -0,0 +1,102 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2013 Greg Ungerer <gerg@uclinux.org>
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+/dts-v1/;
+#include "imx50.dtsi"
+
+/ {
+	model = "Freescale i.MX50 Evaluation Kit";
+	compatible = "fsl,imx50-evk", "fsl,imx50";
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x80000000>;
+	};
+};
+
+&cspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cspi>;
+	cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>, <&gpio4 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	flash: flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p32", "jedec,spi-nor";
+		spi-max-frequency = <25000000>;
+		reg = <1>;
+
+		partition@0 {
+			label = "bootloader";
+			reg = <0x0 0x100000>;
+			read-only;
+		};
+
+		partition@100000 {
+			label = "kernel";
+			reg = <0x100000 0x300000>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_cspi: cspigrp {
+		fsl,pins = <
+			MX50_PAD_CSPI_SCLK__CSPI_SCLK		0x00
+			MX50_PAD_CSPI_MISO__CSPI_MISO		0x00
+			MX50_PAD_CSPI_MOSI__CSPI_MOSI		0x00
+			MX50_PAD_CSPI_SS0__GPIO4_11		0xc4
+			MX50_PAD_ECSPI1_MOSI__GPIO4_13		0x84
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX50_PAD_SSI_RXFS__FEC_MDC		0x80
+			MX50_PAD_SSI_RXC__FEC_MDIO		0x80
+			MX50_PAD_DISP_D0__FEC_TX_CLK		0x80
+			MX50_PAD_DISP_D1__FEC_RX_ERR		0x80
+			MX50_PAD_DISP_D2__FEC_RX_DV		0x80
+			MX50_PAD_DISP_D3__FEC_RDATA_1		0x80
+			MX50_PAD_DISP_D4__FEC_RDATA_0		0x80
+			MX50_PAD_DISP_D5__FEC_TX_EN		0x80
+			MX50_PAD_DISP_D6__FEC_TDATA_1		0x80
+			MX50_PAD_DISP_D7__FEC_TDATA_0		0x80
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX50_PAD_UART1_TXD__UART1_TXD_MUX	0x1e4
+			MX50_PAD_UART1_RXD__UART1_RXD_MUX	0x1e4
+			MX50_PAD_UART1_RTS__UART1_RTS		0x1e4
+			MX50_PAD_UART1_CTS__UART1_CTS		0x1e4
+		>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx50-kobo-aura.dts b/arch/arm/boot/dts/nxp/imx/imx50-kobo-aura.dts
index 82ce8c43be86..b1a6a9c58ac3 100644
--- a/arch/arm/boot/dts/imx50-kobo-aura.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx50-kobo-aura.dts
@@ -26,7 +26,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_leds>;
 
-		on {
+		led-on {
 			label = "kobo_aura:orange:on";
 			gpios = <&gpio6 24 GPIO_ACTIVE_LOW>;
 			panic-indicator;
@@ -38,20 +38,20 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpiokeys>;
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 		};
 
-		hallsensor {
+		event-hallsensor {
 			label = "Hallsensor";
 			gpios = <&gpio5 15 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_RESERVED>;
 			linux,input-type = <EV_SW>;
 		};
 
-		frontlight {
+		event-frontlight {
 			label = "Frontlight";
 			gpios = <&gpio4 1 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_DISPLAYTOGGLE>;
@@ -73,7 +73,7 @@
 		states = <3300000 0>;
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		enable-gpio = <&gpio4 12 GPIO_ACTIVE_LOW>;
+		enable-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
 		startup-delay-us = <100000>;
 	};
 };
diff --git a/arch/arm/boot/dts/imx50-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx50-pinfunc.h
index 5e6b30247543..5e6b30247543 100644
--- a/arch/arm/boot/dts/imx50-pinfunc.h
+++ b/arch/arm/boot/dts/nxp/imx/imx50-pinfunc.h
diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/nxp/imx/imx50.dtsi
index a969f335b240..d76c496b3f71 100644
--- a/arch/arm/boot/dts/imx50.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx50.dtsi
@@ -62,25 +62,25 @@
 
 	clocks {
 		ckil {
-			compatible = "fsl,imx-ckil", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
 
 		ckih1 {
-			compatible = "fsl,imx-ckih1", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <22579200>;
 		};
 
 		ckih2 {
-			compatible = "fsl,imx-ckih2", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <0>;
 		};
 
 		osc {
-			compatible = "fsl,imx-osc", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <24000000>;
 		};
@@ -94,21 +94,21 @@
 		status = "okay";
 	};
 
-	soc {
+	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
 		interrupt-parent = <&tzic>;
 		ranges;
 
-		bus@50000000 { /* AIPS1 */
+		aips1: bus@50000000 { /* AIPS1 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0x50000000 0x10000000>;
 			ranges;
 
-			spba@50000000 {
+			spba-bus@50000000 {
 				compatible = "fsl,spba-bus", "simple-bus";
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -283,7 +283,7 @@
 				clock-names = "ipg", "per";
 			};
 
-			iomuxc: iomuxc@53fa8000 {
+			iomuxc: pinctrl@53fa8000 {
 				compatible = "fsl,imx50-iomuxc", "fsl,imx53-iomuxc";
 				reg = <0x53fa8000 0x4000>;
 			};
@@ -335,10 +335,10 @@
 				#reset-cells = <1>;
 			};
 
-			clks: ccm@53fd4000{
+			clks: ccm@53fd4000 {
 				compatible = "fsl,imx50-ccm";
 				reg = <0x53fd4000 0x4000>;
-				interrupts = <0 71 0x04 0 72 0x04>;
+				interrupts = <71>, <72>;
 				#clock-cells = <1>;
 			};
 
@@ -385,7 +385,7 @@
 			};
 		};
 
-		bus@60000000 {	/* AIPS2 */
+		aips2: bus@60000000 {	/* AIPS2 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -421,7 +421,7 @@
 				status = "disabled";
 			};
 
-			sdma: sdma@63fb0000 {
+			sdma: dma-controller@63fb0000 {
 				compatible = "fsl,imx50-sdma", "fsl,imx35-sdma";
 				reg = <0x63fb0000 0x4000>;
 				interrupts = <6>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx51-apf51.dts b/arch/arm/boot/dts/nxp/imx/imx51-apf51.dts
new file mode 100644
index 000000000000..670e13136f1f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx51-apf51.dts
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Armadeus Systems - <support@armadeus.com>
+ * Copyright 2012 Laurent Cans <laurent.cans@gmail.com>
+ *
+ * Based on mx51-babbage.dts
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+/dts-v1/;
+#include "imx51.dtsi"
+
+/ {
+	model = "Armadeus Systems APF51 module";
+	compatible = "armadeus,imx51-apf51", "fsl,imx51";
+
+	memory@90000000 {
+		device_type = "memory";
+		reg = <0x90000000 0x20000000>;
+	};
+
+	clocks {
+		osc {
+			clock-frequency = <33554432>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "mii";
+	phy-reset-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <1>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX51_PAD_DI_GP3__FEC_TX_ER		0x80000000
+			MX51_PAD_DI2_PIN4__FEC_CRS		0x80000000
+			MX51_PAD_DI2_PIN2__FEC_MDC		0x80000000
+			MX51_PAD_DI2_PIN3__FEC_MDIO		0x80000000
+			MX51_PAD_DI2_DISP_CLK__FEC_RDATA1	0x80000000
+			MX51_PAD_DI_GP4__FEC_RDATA2		0x80000000
+			MX51_PAD_DISP2_DAT0__FEC_RDATA3		0x80000000
+			MX51_PAD_DISP2_DAT1__FEC_RX_ER		0x80000000
+			MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x80000000
+			MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x80000000
+			MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x80000000
+			MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x80000000
+			MX51_PAD_DISP2_DAT10__FEC_COL		0x80000000
+			MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x80000000
+			MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x80000000
+			MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x80000000
+			MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x80000000
+			MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x80000000
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX51_PAD_UART3_RXD__UART3_RXD		0x1c5
+			MX51_PAD_UART3_TXD__UART3_TXD		0x1c5
+		>;
+	};
+};
+
+&nfc {
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx51-apf51dev.dts b/arch/arm/boot/dts/nxp/imx/imx51-apf51dev.dts
new file mode 100644
index 000000000000..6ebd80e30683
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx51-apf51dev.dts
@@ -0,0 +1,215 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Armadeus Systems - <support@armadeus.com>
+ */
+
+/* APF51Dev is a docking board for the APF51 SOM */
+#include "imx51-apf51.dts"
+
+/ {
+	model = "Armadeus Systems APF51Dev docking/development board";
+	compatible = "armadeus,imx51-apf51dev", "armadeus,imx51-apf51", "fsl,imx51";
+
+	backlight {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		compatible = "gpio-backlight";
+		gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+		default-on;
+	};
+
+	disp1 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp1>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing-lw700 {
+				clock-frequency = <33000033>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <96>;
+				hfront-porch = <96>;
+				vback-porch = <20>;
+				vfront-porch = <21>;
+				hsync-len = <64>;
+				vsync-len = <4>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+
+		port {
+			display_in: endpoint {
+				remote-endpoint = <&ipu_di0_disp1>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		user-key {
+			label = "user";
+			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+			linux,code = <256>; /* BTN_0 */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-user {
+			label = "Heartbeat";
+			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>,
+		   <&gpio4 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio3 28 GPIO_ACTIVE_LOW>,
+		   <&gpio3 27 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&esdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc2>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX51_PAD_DI1_D1_CS__GPIO3_4 0x1F5
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX51_PAD_EIM_EB2__GPIO2_22   0x0C5
+			MX51_PAD_EIM_EB3__GPIO2_23   0x0C5
+			MX51_PAD_EIM_CS4__GPIO2_29   0x100
+			MX51_PAD_NANDF_D13__GPIO3_27 0x0C5
+			MX51_PAD_NANDF_D12__GPIO3_28 0x0C5
+			MX51_PAD_CSPI1_SS0__GPIO4_24 0x0C5
+			MX51_PAD_CSPI1_SS1__GPIO4_25 0x0C5
+			MX51_PAD_GPIO1_2__GPIO1_2    0x0C5
+			MX51_PAD_GPIO1_3__GPIO1_3    0x0C5
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
+			MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
+			MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX51_PAD_NANDF_RB3__ECSPI2_MISO		0x185
+			MX51_PAD_NANDF_D15__ECSPI2_MOSI		0x185
+			MX51_PAD_NANDF_RB2__ECSPI2_SCLK		0x185
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
+			MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
+			MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
+			MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
+			MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
+			MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
+		>;
+	};
+
+	pinctrl_esdhc2: esdhc2grp {
+		fsl,pins = <
+			MX51_PAD_SD2_CMD__SD2_CMD		0x400020d5
+			MX51_PAD_SD2_CLK__SD2_CLK		0x20d5
+			MX51_PAD_SD2_DATA0__SD2_DATA0		0x20d5
+			MX51_PAD_SD2_DATA1__SD2_DATA1		0x20d5
+			MX51_PAD_SD2_DATA2__SD2_DATA2		0x20d5
+			MX51_PAD_SD2_DATA3__SD2_DATA3		0x20d5
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX51_PAD_EIM_D27__I2C2_SCL		0x400001ed
+			MX51_PAD_EIM_D24__I2C2_SDA		0x400001ed
+		>;
+	};
+
+	pinctrl_ipu_disp1: ipudisp1grp {
+		fsl,pins = <
+			MX51_PAD_DISP1_DAT0__DISP1_DAT0		0x5
+			MX51_PAD_DISP1_DAT1__DISP1_DAT1		0x5
+			MX51_PAD_DISP1_DAT2__DISP1_DAT2		0x5
+			MX51_PAD_DISP1_DAT3__DISP1_DAT3		0x5
+			MX51_PAD_DISP1_DAT4__DISP1_DAT4		0x5
+			MX51_PAD_DISP1_DAT5__DISP1_DAT5		0x5
+			MX51_PAD_DISP1_DAT6__DISP1_DAT6		0x5
+			MX51_PAD_DISP1_DAT7__DISP1_DAT7		0x5
+			MX51_PAD_DISP1_DAT8__DISP1_DAT8		0x5
+			MX51_PAD_DISP1_DAT9__DISP1_DAT9		0x5
+			MX51_PAD_DISP1_DAT10__DISP1_DAT10	0x5
+			MX51_PAD_DISP1_DAT11__DISP1_DAT11	0x5
+			MX51_PAD_DISP1_DAT12__DISP1_DAT12	0x5
+			MX51_PAD_DISP1_DAT13__DISP1_DAT13	0x5
+			MX51_PAD_DISP1_DAT14__DISP1_DAT14	0x5
+			MX51_PAD_DISP1_DAT15__DISP1_DAT15	0x5
+			MX51_PAD_DISP1_DAT16__DISP1_DAT16	0x5
+			MX51_PAD_DISP1_DAT17__DISP1_DAT17	0x5
+			MX51_PAD_DISP1_DAT18__DISP1_DAT18	0x5
+			MX51_PAD_DISP1_DAT19__DISP1_DAT19	0x5
+			MX51_PAD_DISP1_DAT20__DISP1_DAT20	0x5
+			MX51_PAD_DISP1_DAT21__DISP1_DAT21	0x5
+			MX51_PAD_DISP1_DAT22__DISP1_DAT22	0x5
+			MX51_PAD_DISP1_DAT23__DISP1_DAT23	0x5
+			MX51_PAD_DI1_PIN2__DI1_PIN2		0x5
+			MX51_PAD_DI1_PIN3__DI1_PIN3		0x5
+		>;
+	};
+};
+
+&ipu_di0_disp1 {
+	remote-endpoint = <&display_in>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx51-babbage.dts b/arch/arm/boot/dts/nxp/imx/imx51-babbage.dts
new file mode 100644
index 000000000000..1b6ec55f9068
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx51-babbage.dts
@@ -0,0 +1,717 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+/dts-v1/;
+#include "imx51.dtsi"
+
+/ {
+	model = "Freescale i.MX51 Babbage Board";
+	compatible = "fsl,imx51-babbage", "fsl,imx51";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@90000000 {
+		device_type = "memory";
+		reg = <0x90000000 0x20000000>;
+	};
+
+	ckih1 {
+		clock-frequency = <22579200>;
+	};
+
+	clk_osc: clk-osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	clk_osc_gate: clk-osc-gate {
+		compatible = "gpio-gate-clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_clk26mhz_osc>;
+		clocks = <&clk_osc>;
+		#clock-cells = <0>;
+		enable-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	clk_audio: clk-audio {
+		compatible = "gpio-gate-clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_clk26mhz_audio>;
+		clocks = <&clk_osc_gate>;
+		#clock-cells = <0>;
+		enable-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+	};
+
+	clk_usb: clk-usb {
+		compatible = "gpio-gate-clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_clk26mhz_usb>;
+		clocks = <&clk_osc_gate>;
+		#clock-cells = <0>;
+		enable-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+	};
+
+	display1: disp1 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp1>;
+
+		port@0 {
+		reg = <0>;
+
+			display0_in: endpoint {
+				remote-endpoint = <&ipu_di0_disp1>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			parallel_display_out: endpoint {
+				remote-endpoint = <&tfp410_in>;
+			};
+		};
+	};
+
+	display2: disp2 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb565";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp2>;
+		status = "disabled";
+		display-timings {
+			native-mode = <&timing1>;
+			timing1: timing-claawvga {
+				clock-frequency = <27000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <40>;
+				hfront-porch = <60>;
+				vback-porch = <10>;
+				vfront-porch = <10>;
+				hsync-len = <20>;
+				vsync-len = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+
+		port {
+			display1_in: endpoint {
+				remote-endpoint = <&ipu_di1_disp2>;
+			};
+		};
+	};
+
+	dvi-connector {
+		compatible = "dvi-connector";
+		digital;
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+
+	dvi-encoder {
+		compatible = "ti,tfp410";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint {
+					remote-endpoint = <&parallel_display_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint {
+					remote-endpoint = <&dvi_connector_in>;
+				};
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-power {
+			label = "Power Button";
+			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-diagnostic {
+			label = "diagnostic";
+			gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_hub_reset: regulator-hub-reset {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotgreg>;
+		regulator-name = "hub_reset";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "fsl,imx51-babbage-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx51-babbage-sgtl5000";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <2>;
+		mux-ext-port = <3>;
+	};
+
+	usbphy1: usbphy1 {
+		compatible = "usb-nop-xceiv";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1reg>;
+		clocks = <&clk_usb>;
+		clock-names = "main_clk";
+		reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&vusb_reg>;
+		#phy-cells = <0>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
+		   <&gpio4 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	pmic: mc13892@0 {
+		compatible = "fsl,mc13892";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		spi-max-frequency = <6000000>;
+		spi-cs-high;
+		reg = <0>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,mc13xxx-uses-adc;
+		fsl,mc13xxx-uses-rtc;
+
+		regulators {
+			sw1_reg: sw1 {
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1375000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vpll_reg: vpll {
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdig_reg: vdig {
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+			};
+
+			vsd_reg: vsd {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3150000>;
+			};
+
+			vusb_reg: vusb {
+				regulator-boot-on;
+			};
+
+			vusb2_reg: vusb2 {
+				regulator-min-microvolt = <2400000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vvideo_reg: vvideo {
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+			};
+
+			vaudio_reg: vaudio {
+				regulator-min-microvolt = <2300000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vcam_reg: vcam {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3150000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	flash: at45db321d@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
+		spi-max-frequency = <25000000>;
+		reg = <1>;
+
+		partition@0 {
+			label = "U-Boot";
+			reg = <0x0 0x40000>;
+			read-only;
+		};
+
+		partition@40000 {
+			label = "Kernel";
+			reg = <0x40000 0x3c0000>;
+		};
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&esdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc2>;
+	cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "mii";
+	phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <1>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clk_audio>;
+		VDDA-supply = <&vdig_reg>;
+		VDDIO-supply = <&vvideo_reg>;
+	};
+};
+
+&ipu_di0_disp1 {
+	remote-endpoint = <&display0_in>;
+};
+
+&ipu_di1_disp2 {
+	remote-endpoint = <&display1_in>;
+};
+
+&kpp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kpp>;
+	linux,keymap = <
+		MATRIX_KEY(0, 0, KEY_UP)
+		MATRIX_KEY(0, 1, KEY_DOWN)
+		MATRIX_KEY(0, 2, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0, 3, KEY_HOME)
+		MATRIX_KEY(1, 0, KEY_RIGHT)
+		MATRIX_KEY(1, 1, KEY_LEFT)
+		MATRIX_KEY(1, 2, KEY_ENTER)
+		MATRIX_KEY(1, 3, KEY_VOLUMEUP)
+		MATRIX_KEY(2, 0, KEY_F6)
+		MATRIX_KEY(2, 1, KEY_F8)
+		MATRIX_KEY(2, 2, KEY_F9)
+		MATRIX_KEY(2, 3, KEY_F10)
+		MATRIX_KEY(3, 0, KEY_F1)
+		MATRIX_KEY(3, 1, KEY_F2)
+		MATRIX_KEY(3, 2, KEY_F3)
+		MATRIX_KEY(3, 3, KEY_POWER)
+	>;
+	status = "okay";
+};
+
+&pmu {
+	secure-reg-access;
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	vbus-supply = <&reg_hub_reset>;
+	fsl,usbphy = <&usbphy1>;
+	phy_type = "ulpi";
+	status = "okay";
+};
+
+&usbphy0 {
+	vcc-supply = <&vusb_reg>;
+};
+
+&usbotg {
+	dr_mode = "otg";
+	disable-over-current;
+	phy_type = "utmi_wide";
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX51_PAD_AUD3_BB_TXD__AUD3_TXD		0x80000000
+			MX51_PAD_AUD3_BB_RXD__AUD3_RXD		0x80000000
+			MX51_PAD_AUD3_BB_CK__AUD3_TXC		0x80000000
+			MX51_PAD_AUD3_BB_FS__AUD3_TXFS		0x80000000
+		>;
+	};
+
+	pinctrl_clk26mhz_audio: clk26mhzaudiocgrp {
+		fsl,pins = <
+			MX51_PAD_CSPI1_RDY__GPIO4_26		0x85
+		>;
+	};
+
+	pinctrl_clk26mhz_osc: clk26mhzoscgrp {
+		fsl,pins = <
+			MX51_PAD_DI1_PIN12__GPIO3_1		0x85
+		>;
+	};
+
+	pinctrl_clk26mhz_usb: clk26mhzusbgrp {
+		fsl,pins = <
+			MX51_PAD_EIM_D17__GPIO2_1		0x85
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
+			MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
+			MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
+			MX51_PAD_CSPI1_SS0__GPIO4_24		0x85 /* CS0 */
+			MX51_PAD_CSPI1_SS1__GPIO4_25		0x85 /* CS1 */
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
+			MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
+			MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
+			MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
+			MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
+			MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
+			MX51_PAD_GPIO1_0__GPIO1_0		0x100
+			MX51_PAD_GPIO1_1__GPIO1_1		0x100
+		>;
+	};
+
+	pinctrl_esdhc2: esdhc2grp {
+		fsl,pins = <
+			MX51_PAD_SD2_CMD__SD2_CMD		0x400020d5
+			MX51_PAD_SD2_CLK__SD2_CLK		0x20d5
+			MX51_PAD_SD2_DATA0__SD2_DATA0		0x20d5
+			MX51_PAD_SD2_DATA1__SD2_DATA1		0x20d5
+			MX51_PAD_SD2_DATA2__SD2_DATA2		0x20d5
+			MX51_PAD_SD2_DATA3__SD2_DATA3		0x20d5
+			MX51_PAD_GPIO1_5__GPIO1_5		0x100 /* WP */
+			MX51_PAD_GPIO1_6__GPIO1_6		0x100 /* CD */
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX51_PAD_EIM_EB2__FEC_MDIO		0x000001f5
+			MX51_PAD_EIM_EB3__FEC_RDATA1		0x00000085
+			MX51_PAD_EIM_CS2__FEC_RDATA2		0x00000085
+			MX51_PAD_EIM_CS3__FEC_RDATA3		0x00000085
+			MX51_PAD_EIM_CS4__FEC_RX_ER		0x00000180
+			MX51_PAD_EIM_CS5__FEC_CRS		0x00000180
+			MX51_PAD_NANDF_RB2__FEC_COL		0x00000180
+			MX51_PAD_NANDF_RB3__FEC_RX_CLK		0x00000180
+			MX51_PAD_NANDF_D9__FEC_RDATA0		0x00002180
+			MX51_PAD_NANDF_D8__FEC_TDATA0		0x00002004
+			MX51_PAD_NANDF_CS2__FEC_TX_ER		0x00002004
+			MX51_PAD_NANDF_CS3__FEC_MDC		0x00002004
+			MX51_PAD_NANDF_CS4__FEC_TDATA1		0x00002004
+			MX51_PAD_NANDF_CS5__FEC_TDATA2		0x00002004
+			MX51_PAD_NANDF_CS6__FEC_TDATA3		0x00002004
+			MX51_PAD_NANDF_CS7__FEC_TX_EN		0x00002004
+			MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK	0x00002180
+			MX51_PAD_NANDF_D11__FEC_RX_DV		0x000020a4
+			MX51_PAD_EIM_A20__GPIO2_14		0x00000085 /* Phy Reset */
+		>;
+	};
+
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX51_PAD_EIM_A27__GPIO2_21		0x5
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX51_PAD_EIM_D22__GPIO2_6		0x80000000
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX51_PAD_EIM_D19__I2C1_SCL		0x400001ed
+			MX51_PAD_EIM_D16__I2C1_SDA		0x400001ed
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX51_PAD_KEY_COL4__I2C2_SCL		0x400001ed
+			MX51_PAD_KEY_COL5__I2C2_SDA		0x400001ed
+		>;
+	};
+
+	pinctrl_ipu_disp1: ipudisp1grp {
+		fsl,pins = <
+			MX51_PAD_DISP1_DAT0__DISP1_DAT0		0x5
+			MX51_PAD_DISP1_DAT1__DISP1_DAT1		0x5
+			MX51_PAD_DISP1_DAT2__DISP1_DAT2		0x5
+			MX51_PAD_DISP1_DAT3__DISP1_DAT3		0x5
+			MX51_PAD_DISP1_DAT4__DISP1_DAT4		0x5
+			MX51_PAD_DISP1_DAT5__DISP1_DAT5		0x5
+			MX51_PAD_DISP1_DAT6__DISP1_DAT6		0x5
+			MX51_PAD_DISP1_DAT7__DISP1_DAT7		0x5
+			MX51_PAD_DISP1_DAT8__DISP1_DAT8		0x5
+			MX51_PAD_DISP1_DAT9__DISP1_DAT9		0x5
+			MX51_PAD_DISP1_DAT10__DISP1_DAT10	0x5
+			MX51_PAD_DISP1_DAT11__DISP1_DAT11	0x5
+			MX51_PAD_DISP1_DAT12__DISP1_DAT12	0x5
+			MX51_PAD_DISP1_DAT13__DISP1_DAT13	0x5
+			MX51_PAD_DISP1_DAT14__DISP1_DAT14	0x5
+			MX51_PAD_DISP1_DAT15__DISP1_DAT15	0x5
+			MX51_PAD_DISP1_DAT16__DISP1_DAT16	0x5
+			MX51_PAD_DISP1_DAT17__DISP1_DAT17	0x5
+			MX51_PAD_DISP1_DAT18__DISP1_DAT18	0x5
+			MX51_PAD_DISP1_DAT19__DISP1_DAT19	0x5
+			MX51_PAD_DISP1_DAT20__DISP1_DAT20	0x5
+			MX51_PAD_DISP1_DAT21__DISP1_DAT21	0x5
+			MX51_PAD_DISP1_DAT22__DISP1_DAT22	0x5
+			MX51_PAD_DISP1_DAT23__DISP1_DAT23	0x5
+			MX51_PAD_DI1_PIN2__DI1_PIN2		0x5
+			MX51_PAD_DI1_PIN3__DI1_PIN3		0x5
+		>;
+	};
+
+	pinctrl_ipu_disp2: ipudisp2grp {
+		fsl,pins = <
+			MX51_PAD_DISP2_DAT0__DISP2_DAT0		0x5
+			MX51_PAD_DISP2_DAT1__DISP2_DAT1		0x5
+			MX51_PAD_DISP2_DAT2__DISP2_DAT2		0x5
+			MX51_PAD_DISP2_DAT3__DISP2_DAT3		0x5
+			MX51_PAD_DISP2_DAT4__DISP2_DAT4		0x5
+			MX51_PAD_DISP2_DAT5__DISP2_DAT5		0x5
+			MX51_PAD_DISP2_DAT6__DISP2_DAT6		0x5
+			MX51_PAD_DISP2_DAT7__DISP2_DAT7		0x5
+			MX51_PAD_DISP2_DAT8__DISP2_DAT8		0x5
+			MX51_PAD_DISP2_DAT9__DISP2_DAT9		0x5
+			MX51_PAD_DISP2_DAT10__DISP2_DAT10	0x5
+			MX51_PAD_DISP2_DAT11__DISP2_DAT11	0x5
+			MX51_PAD_DISP2_DAT12__DISP2_DAT12	0x5
+			MX51_PAD_DISP2_DAT13__DISP2_DAT13	0x5
+			MX51_PAD_DISP2_DAT14__DISP2_DAT14	0x5
+			MX51_PAD_DISP2_DAT15__DISP2_DAT15	0x5
+			MX51_PAD_DI2_PIN2__DI2_PIN2		0x5
+			MX51_PAD_DI2_PIN3__DI2_PIN3		0x5
+			MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK	0x5
+			MX51_PAD_DI_GP4__DI2_PIN15		0x5
+		>;
+	};
+
+	pinctrl_kpp: kppgrp {
+		fsl,pins = <
+			MX51_PAD_KEY_ROW0__KEY_ROW0		0xe0
+			MX51_PAD_KEY_ROW1__KEY_ROW1		0xe0
+			MX51_PAD_KEY_ROW2__KEY_ROW2		0xe0
+			MX51_PAD_KEY_ROW3__KEY_ROW3		0xe0
+			MX51_PAD_KEY_COL0__KEY_COL0		0xe8
+			MX51_PAD_KEY_COL1__KEY_COL1		0xe8
+			MX51_PAD_KEY_COL2__KEY_COL2		0xe8
+			MX51_PAD_KEY_COL3__KEY_COL3		0xe8
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX51_PAD_GPIO1_8__GPIO1_8		0xe5 /* IRQ */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
+			MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
+			MX51_PAD_UART1_RTS__UART1_RTS		0x1c5
+			MX51_PAD_UART1_CTS__UART1_CTS		0x1c5
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX51_PAD_UART2_RXD__UART2_RXD		0x1c5
+			MX51_PAD_UART2_TXD__UART2_TXD		0x1c5
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX51_PAD_EIM_D25__UART3_RXD		0x1c5
+			MX51_PAD_EIM_D26__UART3_TXD		0x1c5
+			MX51_PAD_EIM_D27__UART3_RTS		0x1c5
+			MX51_PAD_EIM_D24__UART3_CTS		0x1c5
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX51_PAD_USBH1_CLK__USBH1_CLK		0x80000000
+			MX51_PAD_USBH1_DIR__USBH1_DIR		0x80000000
+			MX51_PAD_USBH1_NXT__USBH1_NXT		0x80000000
+			MX51_PAD_USBH1_DATA0__USBH1_DATA0	0x80000000
+			MX51_PAD_USBH1_DATA1__USBH1_DATA1	0x80000000
+			MX51_PAD_USBH1_DATA2__USBH1_DATA2	0x80000000
+			MX51_PAD_USBH1_DATA3__USBH1_DATA3	0x80000000
+			MX51_PAD_USBH1_DATA4__USBH1_DATA4	0x80000000
+			MX51_PAD_USBH1_DATA5__USBH1_DATA5	0x80000000
+			MX51_PAD_USBH1_DATA6__USBH1_DATA6	0x80000000
+			MX51_PAD_USBH1_DATA7__USBH1_DATA7	0x80000000
+		>;
+	};
+
+	pinctrl_usbh1reg: usbh1reggrp {
+		fsl,pins = <
+			MX51_PAD_EIM_D21__GPIO2_5		0x85
+		>;
+	};
+
+	pinctrl_usbotgreg: usbotgreggrp {
+		fsl,pins = <
+			MX51_PAD_GPIO1_7__GPIO1_7		0x85
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx51-digi-connectcore-jsk.dts b/arch/arm/boot/dts/nxp/imx/imx51-digi-connectcore-jsk.dts
new file mode 100644
index 000000000000..9750b5f93330
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx51-digi-connectcore-jsk.dts
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ */
+
+#include "imx51-digi-connectcore-som.dtsi"
+
+/ {
+	model = "Digi ConnectCore CC(W)-MX51 JSK";
+	compatible = "digi,connectcore-ccxmx51-jsk",
+		     "digi,connectcore-ccxmx51-som", "fsl,imx51";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	usbphy1: usbphy1 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
+	};
+};
+
+&esdhc1 {
+	status = "okay";
+};
+
+&owire {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_owire>;
+	status = "okay";
+};
+
+&pmic {
+	fsl,mc13xxx-uses-rtc;
+
+	regulators {
+		vcoincell_reg: vcoincell {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	fsl,usbphy = <&usbphy1>;
+	dr_mode = "host";
+	phy_type = "ulpi";
+	disable-over-current;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_owire: owiregrp {
+		fsl,pins = <
+			MX51_PAD_OWIRE_LINE__OWIRE_LINE		0x40000000
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
+			MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX51_PAD_UART2_RXD__UART2_RXD		0x1c5
+			MX51_PAD_UART2_TXD__UART2_TXD		0x1c5
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX51_PAD_UART3_RXD__UART3_RXD		0x1c5
+			MX51_PAD_UART3_TXD__UART3_TXD		0x1c5
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX51_PAD_USBH1_DATA0__USBH1_DATA0	0x1e5
+			MX51_PAD_USBH1_DATA1__USBH1_DATA1	0x1e5
+			MX51_PAD_USBH1_DATA2__USBH1_DATA2	0x1e5
+			MX51_PAD_USBH1_DATA3__USBH1_DATA3	0x1e5
+			MX51_PAD_USBH1_DATA4__USBH1_DATA4	0x1e5
+			MX51_PAD_USBH1_DATA5__USBH1_DATA5	0x1e5
+			MX51_PAD_USBH1_DATA6__USBH1_DATA6	0x1e5
+			MX51_PAD_USBH1_DATA7__USBH1_DATA7	0x1e5
+			MX51_PAD_USBH1_CLK__USBH1_CLK		0x1e5
+			MX51_PAD_USBH1_DIR__USBH1_DIR		0x1e5
+			MX51_PAD_USBH1_NXT__USBH1_NXT		0x1e5
+			MX51_PAD_USBH1_STP__USBH1_STP		0x1e5
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx51-digi-connectcore-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx51-digi-connectcore-som.dtsi
new file mode 100644
index 000000000000..1980f751f161
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx51-digi-connectcore-som.dtsi
@@ -0,0 +1,374 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ */
+
+/dts-v1/;
+#include "imx51.dtsi"
+
+/ {
+	model = "Digi ConnectCore CC(W)-MX51";
+	compatible = "digi,connectcore-ccxmx51-som", "fsl,imx51";
+
+	memory@90000000 {
+		device_type = "memory";
+		reg = <0x90000000 0x08000000>;
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	pmic: mc13892@0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mc13892>;
+		compatible = "fsl,mc13892";
+		spi-max-frequency = <16000000>;
+		spi-cs-high;
+		reg = <0>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+
+		regulators {
+			sw1_reg: sw1 {
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1175000>;
+				regulator-max-microvolt = <1275000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <1150000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst { };
+
+			viohi_reg: viohi {
+				regulator-always-on;
+			};
+
+			vpll_reg: vpll {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vdig_reg: vdig {
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-always-on;
+			};
+
+			vsd_reg: vsd {
+				regulator-min-microvolt = <3150000>;
+				regulator-max-microvolt = <3150000>;
+				regulator-always-on;
+			};
+
+			vusb2_reg: vusb2 {
+				regulator-min-microvolt = <2600000>;
+				regulator-max-microvolt = <2600000>;
+				regulator-always-on;
+			};
+
+			vvideo_reg: vvideo {
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-always-on;
+			};
+
+			vaudio_reg: vaudio {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vcam_reg: vcam {
+				regulator-min-microvolt = <2750000>;
+				regulator-max-microvolt = <2750000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vusb_reg: vusb {
+				regulator-always-on;
+			};
+
+			gpo2_reg: gpo2 { };
+
+			gpo3_reg: gpo3 { };
+
+			gpo4_reg: gpo4 { };
+
+			pwgt2spi_reg: pwgt2spi {
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	max-frequency = <50000000>;
+	bus-width = <1>;
+};
+
+&esdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc2>;
+	cap-sdio-irq;
+	wakeup-source;
+	keep-power-in-suspend;
+	max-frequency = <50000000>;
+	no-1-8-v;
+	non-removable;
+	vmmc-supply = <&gpo4_reg>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "mii";
+	phy-supply = <&gpo3_reg>;
+	/* Pins shared with LCD2, keep status disabled */
+};
+
+&i2c2 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	clock-frequency = <400000>;
+	scl-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	mma7455l@1d {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mma7455l>;
+		compatible = "fsl,mma7455";
+		reg = <0x1d>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <7 IRQ_TYPE_LEVEL_HIGH>, <6 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&usbotg {
+	phy_type = "utmi_wide";
+	disable-over-current;
+	vbus-supply = <&swbst_reg>;
+	/* Device role is not known, keep status disabled */
+};
+
+&weim {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_weim>;
+	status = "okay";
+
+	lan9221: ethernet@5,0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lan9221>;
+		compatible = "smsc,lan9221", "smsc,lan9115";
+		reg = <5 0x00000000 0x1000>;
+		fsl,weim-cs-timing = <
+			0x00420081 0x00000000
+			0x32260000 0x00000000
+			0x72080f00 0x00000000
+		>;
+		clocks = <&clks IMX5_CLK_DUMMY>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+		phy-mode = "mii";
+		reg-io-width = <2>;
+		smsc,irq-push-pull;
+		vdd33a-supply = <&gpo2_reg>;
+		vddvario-supply = <&gpo2_reg>;
+	};
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
+			MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
+			MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
+			MX51_PAD_CSPI1_SS0__GPIO4_24		0x85 /* CS0 */
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX51_PAD_SD1_CLK__SD1_CLK		0x400021d5
+			MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
+			MX51_PAD_SD1_DATA0__SD1_DATA0		0x400020d5
+		>;
+	};
+
+	pinctrl_esdhc2: esdhc2grp {
+		fsl,pins = <
+			MX51_PAD_SD2_CMD__SD2_CMD		0x400020d5
+			MX51_PAD_SD2_CLK__SD2_CLK		0x20d5
+			MX51_PAD_SD2_DATA0__SD2_DATA0		0x20d5
+			MX51_PAD_SD2_DATA1__SD2_DATA1		0x20d5
+			MX51_PAD_SD2_DATA2__SD2_DATA2		0x20d5
+			MX51_PAD_SD2_DATA3__SD2_DATA3		0x20d5
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX51_PAD_DI_GP3__FEC_TX_ER		0x80000000
+			MX51_PAD_DI2_PIN4__FEC_CRS		0x80000000
+			MX51_PAD_DI2_PIN2__FEC_MDC		0x80000000
+			MX51_PAD_DI2_PIN3__FEC_MDIO		0x80000000
+			MX51_PAD_DI2_DISP_CLK__FEC_RDATA1	0x80000000
+			MX51_PAD_DI_GP4__FEC_RDATA2		0x80000000
+			MX51_PAD_DISP2_DAT0__FEC_RDATA3		0x80000000
+			MX51_PAD_DISP2_DAT1__FEC_RX_ER		0x80000000
+			MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x80000000
+			MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x80000000
+			MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x80000000
+			MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x80000000
+			MX51_PAD_DISP2_DAT10__FEC_COL		0x80000000
+			MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x80000000
+			MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x80000000
+			MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x80000000
+			MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x80000000
+			MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x80000000
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX51_PAD_GPIO1_2__I2C2_SCL		0x400001ed
+			MX51_PAD_GPIO1_3__I2C2_SDA		0x400001ed
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX51_PAD_GPIO1_2__GPIO1_2		0x400001ed
+			MX51_PAD_GPIO1_3__GPIO1_3		0x400001ed
+		>;
+	};
+
+	pinctrl_nfc: nfcgrp {
+		fsl,pins = <
+			MX51_PAD_NANDF_D0__NANDF_D0		0x80000000
+			MX51_PAD_NANDF_D1__NANDF_D1		0x80000000
+			MX51_PAD_NANDF_D2__NANDF_D2		0x80000000
+			MX51_PAD_NANDF_D3__NANDF_D3		0x80000000
+			MX51_PAD_NANDF_D4__NANDF_D4		0x80000000
+			MX51_PAD_NANDF_D5__NANDF_D5		0x80000000
+			MX51_PAD_NANDF_D6__NANDF_D6		0x80000000
+			MX51_PAD_NANDF_D7__NANDF_D7		0x80000000
+			MX51_PAD_NANDF_ALE__NANDF_ALE		0x80000000
+			MX51_PAD_NANDF_CLE__NANDF_CLE		0x80000000
+			MX51_PAD_NANDF_RE_B__NANDF_RE_B		0x80000000
+			MX51_PAD_NANDF_WE_B__NANDF_WE_B		0x80000000
+			MX51_PAD_NANDF_WP_B__NANDF_WP_B		0x80000000
+			MX51_PAD_NANDF_CS0__NANDF_CS0		0x80000000
+			MX51_PAD_NANDF_RB0__NANDF_RB0		0x80000000
+		>;
+	};
+
+	pinctrl_lan9221: lan9221grp {
+		fsl,pins = <
+			MX51_PAD_GPIO1_9__GPIO1_9		0xe5 /* IRQ */
+		>;
+	};
+
+	pinctrl_mc13892: mc13892grp {
+		fsl,pins = <
+			MX51_PAD_GPIO1_5__GPIO1_5		0xe5 /* IRQ */
+		>;
+	};
+
+	pinctrl_mma7455l: mma7455lgrp {
+		fsl,pins = <
+			MX51_PAD_GPIO1_7__GPIO1_7		0xe5 /* IRQ1 */
+			MX51_PAD_GPIO1_6__GPIO1_6		0xe5 /* IRQ2 */
+		>;
+	};
+
+	pinctrl_weim: weimgrp {
+		fsl,pins = <
+			MX51_PAD_EIM_DA0__EIM_DA0		0x80000000
+			MX51_PAD_EIM_DA1__EIM_DA1		0x80000000
+			MX51_PAD_EIM_DA2__EIM_DA2		0x80000000
+			MX51_PAD_EIM_DA3__EIM_DA3		0x80000000
+			MX51_PAD_EIM_DA4__EIM_DA4		0x80000000
+			MX51_PAD_EIM_DA5__EIM_DA5		0x80000000
+			MX51_PAD_EIM_DA6__EIM_DA6		0x80000000
+			MX51_PAD_EIM_DA7__EIM_DA7		0x80000000
+			MX51_PAD_EIM_DA8__EIM_DA8		0x80000000
+			MX51_PAD_EIM_DA9__EIM_DA9		0x80000000
+			MX51_PAD_EIM_DA10__EIM_DA10		0x80000000
+			MX51_PAD_EIM_DA11__EIM_DA11		0x80000000
+			MX51_PAD_EIM_DA12__EIM_DA12		0x80000000
+			MX51_PAD_EIM_DA13__EIM_DA13		0x80000000
+			MX51_PAD_EIM_DA14__EIM_DA14		0x80000000
+			MX51_PAD_EIM_DA15__EIM_DA15		0x80000000
+			MX51_PAD_EIM_A16__EIM_A16		0x80000000
+			MX51_PAD_EIM_A17__EIM_A17		0x80000000
+			MX51_PAD_EIM_A18__EIM_A18		0x80000000
+			MX51_PAD_EIM_A19__EIM_A19		0x80000000
+			MX51_PAD_EIM_A20__EIM_A20		0x80000000
+			MX51_PAD_EIM_A21__EIM_A21		0x80000000
+			MX51_PAD_EIM_A22__EIM_A22		0x80000000
+			MX51_PAD_EIM_A23__EIM_A23		0x80000000
+			MX51_PAD_EIM_A24__EIM_A24		0x80000000
+			MX51_PAD_EIM_A25__EIM_A25		0x80000000
+			MX51_PAD_EIM_A26__EIM_A26		0x80000000
+			MX51_PAD_EIM_A27__EIM_A27		0x80000000
+			MX51_PAD_EIM_D16__EIM_D16		0x80000000
+			MX51_PAD_EIM_D17__EIM_D17		0x80000000
+			MX51_PAD_EIM_D18__EIM_D18		0x80000000
+			MX51_PAD_EIM_D19__EIM_D19		0x80000000
+			MX51_PAD_EIM_D20__EIM_D20		0x80000000
+			MX51_PAD_EIM_D21__EIM_D21		0x80000000
+			MX51_PAD_EIM_D22__EIM_D22		0x80000000
+			MX51_PAD_EIM_D23__EIM_D23		0x80000000
+			MX51_PAD_EIM_D24__EIM_D24		0x80000000
+			MX51_PAD_EIM_D25__EIM_D25		0x80000000
+			MX51_PAD_EIM_D26__EIM_D26		0x80000000
+			MX51_PAD_EIM_D27__EIM_D27		0x80000000
+			MX51_PAD_EIM_D28__EIM_D28		0x80000000
+			MX51_PAD_EIM_D29__EIM_D29		0x80000000
+			MX51_PAD_EIM_D30__EIM_D30		0x80000000
+			MX51_PAD_EIM_D31__EIM_D31		0x80000000
+			MX51_PAD_EIM_OE__EIM_OE			0x80000000
+			MX51_PAD_EIM_DTACK__EIM_DTACK		0x80000000
+			MX51_PAD_EIM_LBA__EIM_LBA		0x80000000
+			MX51_PAD_EIM_CS5__EIM_CS5		0x80000000 /* CS5 */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx51-eukrea-cpuimx51.dtsi b/arch/arm/boot/dts/nxp/imx/imx51-eukrea-cpuimx51.dtsi
new file mode 100644
index 000000000000..244740d65b3d
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx51-eukrea-cpuimx51.dtsi
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ */
+
+#include "imx51.dtsi"
+
+/ {
+	model = "Eukrea CPUIMX51";
+	compatible = "eukrea,cpuimx51", "fsl,imx51";
+
+	memory@90000000 {
+		device_type = "memory";
+		reg = <0x90000000 0x10000000>; /* 256M */
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	tsc2007: tsc2007@49 {
+		compatible = "ti,tsc2007";
+		gpios = <&gpio4 0 1>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <0x0 0x8>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tsc2007_1>;
+		reg = <0x49>;
+		ti,x-plate-ohms = <180>;
+	};
+};
+
+&iomuxc {
+	pinctrl_tsc2007_1: tsc2007-1-grp {
+		fsl,pins = <
+			MX51_PAD_GPIO_NAND__GPIO_NAND 0x1f5
+			MX51_PAD_NANDF_D8__GPIO4_0 0x1f5
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX51_PAD_DI_GP3__FEC_TX_ER		0x80000000
+			MX51_PAD_DI2_PIN4__FEC_CRS		0x80000000
+			MX51_PAD_DI2_PIN2__FEC_MDC		0x80000000
+			MX51_PAD_DI2_PIN3__FEC_MDIO		0x80000000
+			MX51_PAD_DI2_DISP_CLK__FEC_RDATA1	0x80000000
+			MX51_PAD_DI_GP4__FEC_RDATA2		0x80000000
+			MX51_PAD_DISP2_DAT0__FEC_RDATA3		0x80000000
+			MX51_PAD_DISP2_DAT1__FEC_RX_ER		0x80000000
+			MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x80000000
+			MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x80000000
+			MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x80000000
+			MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x80000000
+			MX51_PAD_DISP2_DAT10__FEC_COL		0x80000000
+			MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x80000000
+			MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x80000000
+			MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x80000000
+			MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x80000000
+			MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x80000000
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX51_PAD_SD2_CMD__I2C1_SCL		0x400001ed
+			MX51_PAD_SD2_CLK__I2C1_SDA		0x400001ed
+		>;
+	};
+};
+
+&nfc {
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/nxp/imx/imx51-eukrea-mbimxsd51-baseboard.dts
new file mode 100644
index 000000000000..0e0b9a811b96
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx51-eukrea-mbimxsd51-baseboard.dts
@@ -0,0 +1,265 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ */
+
+/dts-v1/;
+#include "imx51-eukrea-cpuimx51.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Eukrea CPUIMX51";
+	compatible = "eukrea,mbimxsd51","eukrea,cpuimx51", "fsl,imx51";
+
+	clocks {
+		clk24M: can_clock {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiokeys_1>;
+
+		button-1 {
+			label = "BP1";
+			gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+			linux,code = <256>;
+			wakeup-source;
+			linux,input-type = <1>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpioled>;
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio3 30 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_can: regulator-can {
+		compatible = "regulator-fixed";
+		regulator-name = "CAN_RST";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <20000>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "eukrea,asoc-tlv320";
+		eukrea,model = "imx51-eukrea-tlv320aic23";
+		ssi-controller = <&ssi2>;
+		fsl,mux-int-port = <2>;
+		fsl,mux-ext-port = <3>;
+	};
+
+	usbphy1: usbphy1 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
+		clock-names = "main_clk";
+		clock-frequency = <19200000>;
+		#phy-cells = <0>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1 &pinctrl_esdhc1_cd>;
+	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	can0: can@0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can>;
+		compatible = "microchip,mcp2515";
+		reg = <0>;
+		clocks = <&clk24M>;
+		spi-max-frequency = <10000000>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&reg_can>;
+	};
+};
+
+&i2c1 {
+	tlv320aic23: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+	};
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX51_PAD_AUD3_BB_TXD__AUD3_TXD		0x80000000
+			MX51_PAD_AUD3_BB_RXD__AUD3_RXD		0x80000000
+			MX51_PAD_AUD3_BB_CK__AUD3_TXC		0x80000000
+			MX51_PAD_AUD3_BB_FS__AUD3_TXFS		0x80000000
+		>;
+	};
+
+
+	pinctrl_can: cangrp {
+		fsl,pins = <
+			MX51_PAD_CSI2_PIXCLK__GPIO4_15		0x80000000	/* nReset */
+			MX51_PAD_GPIO1_1__GPIO1_1		0x80000000	/* IRQ */
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
+			MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
+			MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
+			MX51_PAD_CSPI1_SS0__GPIO4_24		0x80000000 	/* CS0 */
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
+			MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
+			MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
+			MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
+			MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
+			MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
+			MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX51_PAD_UART3_RXD__UART3_RXD		0x1c5
+			MX51_PAD_UART3_TXD__UART3_TXD		0x1c5
+		>;
+	};
+
+	pinctrl_uart3_rtscts: uart3rtsctsgrp {
+		fsl,pins = <
+			MX51_PAD_KEY_COL4__UART3_RTS		0x1c5
+			MX51_PAD_KEY_COL5__UART3_CTS		0x1c5
+		>;
+	};
+
+	pinctrl_backlight_1: backlight1grp {
+		fsl,pins = <
+			MX51_PAD_DI1_D1_CS__GPIO3_4 0x1f5
+		>;
+	};
+
+	pinctrl_esdhc1_cd: esdhc1_cdgrp {
+		fsl,pins = <
+			MX51_PAD_GPIO1_0__GPIO1_0 0xd5
+		>;
+	};
+
+	pinctrl_gpiokeys_1: gpiokeys1grp {
+		fsl,pins = <
+			MX51_PAD_NANDF_D9__GPIO3_31 0x1f5
+		>;
+	};
+
+	pinctrl_gpioled: gpioled1grp {
+		fsl,pins = <
+			MX51_PAD_NANDF_D10__GPIO3_30 0x80000000
+		>;
+	};
+
+	pinctrl_reg_lcd_3v3: reg_lcd_3v3grp {
+		fsl,pins = <
+			MX51_PAD_CSI1_D9__GPIO3_13 0x1f5
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX51_PAD_USBH1_CLK__USBH1_CLK     0x1e5
+			MX51_PAD_USBH1_DIR__USBH1_DIR     0x1e5
+			MX51_PAD_USBH1_NXT__USBH1_NXT     0x1e5
+			MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x1e5
+			MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x1e5
+			MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x1e5
+			MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x1e5
+			MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x1e5
+			MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x1e5
+			MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x1e5
+			MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x1e5
+			MX51_PAD_USBH1_STP__USBH1_STP     0x1e5
+		>;
+	};
+
+	pinctrl_usbh1_vbus: usbh1-vbusgrp {
+		fsl,pins = <
+			MX51_PAD_EIM_CS3__GPIO2_28 0x1f5
+		>;
+	};
+};
+
+&ssi2 {
+	codec-handle = <&tlv320aic23>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3 &pinctrl_uart3_rtscts>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	fsl,usbphy = <&usbphy1>;
+	dr_mode = "host";
+	phy_type = "ulpi";
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "otg";
+	phy_type = "utmi_wide";
+	status = "okay";
+};
+
+&usbphy0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1_vbus>;
+	reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/imx51-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx51-pinfunc.h
index 910e0ec50ef3..910e0ec50ef3 100644
--- a/arch/arm/boot/dts/imx51-pinfunc.h
+++ b/arch/arm/boot/dts/nxp/imx/imx51-pinfunc.h
diff --git a/arch/arm/boot/dts/imx51-ts4800.dts b/arch/arm/boot/dts/nxp/imx/imx51-ts4800.dts
index 6ecb83e7f336..079bd3d14999 100644
--- a/arch/arm/boot/dts/imx51-ts4800.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx51-ts4800.dts
@@ -45,7 +45,7 @@
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 78770>;
+		pwms = <&pwm1 0 78770 0>;
 		brightness-levels = <0 150 200 255>;
 		default-brightness-level = <1>;
 		power-supply = <&backlight_reg>;
@@ -58,8 +58,8 @@
 		pinctrl-0 = <&pinctrl_lcd>;
 
 		display-timings {
-			800x480p60 {
-				native-mode;
+			native-mode = <&timing0>;
+			timing0: timing-800x480p60 {
 				clock-frequency = <30066000>;
 				hactive = <800>;
 				vactive = <480>;
@@ -102,7 +102,7 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	rtc: m41t00@68 {
+	rtc: rtc@68 {
 		compatible = "st,m41t00";
 		reg = <0x68>;
 	};
@@ -113,7 +113,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm_backlight>;
 	status = "okay";
@@ -174,7 +173,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_interrupt_fpga>;
 			interrupt-parent = <&gpio2>;
-			interrupts= <9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
 		};
diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/nxp/imx/imx51-zii-rdu1.dts
index ec8ca3ac2c1c..43ff5eafb2bb 100644
--- a/arch/arm/boot/dts/imx51-zii-rdu1.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx51-zii-rdu1.dts
@@ -119,8 +119,8 @@
 		compatible = "i2c-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_swi2c>;
-		gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>, /* sda */
-			<&gpio3 4 GPIO_ACTIVE_HIGH>; /* scl */
+		sda-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,delay-us = <50>;
 		status = "okay";
 
@@ -137,7 +137,7 @@
 		};
 	};
 
-	spi_gpio: spi-gpio {
+	spi_gpio: spi {
 		compatible = "spi-gpio";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -145,9 +145,9 @@
 		pinctrl-0 = <&pinctrl_gpiospi0>;
 		status = "okay";
 
-		gpio-sck = <&gpio4 15 GPIO_ACTIVE_HIGH>;
-		gpio-mosi = <&gpio4 12 GPIO_ACTIVE_HIGH>;
-		gpio-miso = <&gpio4 11 GPIO_ACTIVE_HIGH>;
+		sck-gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <1>;
 		cs-gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>;
 
@@ -160,7 +160,7 @@
 		};
 	};
 
-	mdio_gpio: mdio-gpio {
+	mdio_gpio: mdio {
 		compatible = "virtual,mdio-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_swmdio>;
@@ -181,7 +181,7 @@
 
 				port@0 {
 					reg = <0>;
-					label = "cpu";
+					phy-mode = "rev-mii";
 					ethernet = <&fec>;
 
 					fixed-link {
@@ -259,7 +259,7 @@
 	pinctrl-0 = <&pinctrl_audmux>;
 	status = "okay";
 
-	ssi2 {
+	mux-ssi2 {
 		fsl,audmux-port = <1>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_SYN |
@@ -271,7 +271,7 @@
 		>;
 	};
 
-	aud3 {
+	mux-aud3 {
 		fsl,audmux-port = <2>;
 		fsl,port-config = <
 			IMX_AUDMUX_V2_PTCR_SYN
@@ -556,7 +556,7 @@
 	pinctrl-0 = <&pinctrl_uart3>;
 	status = "okay";
 
-	rave-sp {
+	mcu {
 		compatible = "zii,rave-sp-rdu1";
 		current-speed = <38400>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts b/arch/arm/boot/dts/nxp/imx/imx51-zii-scu2-mezz.dts
index aa91e5dde4b8..26eb7a9506e4 100644
--- a/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx51-zii-scu2-mezz.dts
@@ -37,7 +37,7 @@
 		regulator-max-microvolt = <5000000>;
 	};
 
-	mdio_gpio: mdio-gpio {
+	mdio_gpio: mdio {
 		compatible = "virtual,mdio-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_swmdio>;
@@ -82,7 +82,7 @@
 
 				port@4 {
 					reg = <4>;
-					label = "cpu";
+					phy-mode = "rev-mii";
 					ethernet = <&fec>;
 
 					fixed-link {
@@ -311,7 +311,7 @@
 	pinctrl-0 = <&pinctrl_uart3>;
 	status = "okay";
 
-	rave-sp {
+	mcu {
 		compatible = "zii,rave-sp-mezz";
 		current-speed = <57600>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/imx51-zii-scu3-esb.dts b/arch/arm/boot/dts/nxp/imx/imx51-zii-scu3-esb.dts
index 875b10a7d674..19a3b142c964 100644
--- a/arch/arm/boot/dts/imx51-zii-scu3-esb.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx51-zii-scu3-esb.dts
@@ -267,7 +267,6 @@
 
 				port@6 {
 					reg = <6>;
-					label = "cpu";
 					phy-mode = "mii";
 					ethernet = <&fec>;
 
@@ -319,7 +318,7 @@
 	pinctrl-0 = <&pinctrl_uart3>;
 	status = "okay";
 
-	rave-sp {
+	mcu {
 		compatible = "zii,rave-sp-esb";
 		current-speed = <57600>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/nxp/imx/imx51.dtsi
index 01cfcbe5928e..c8698a9af1a7 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx51.dtsi
@@ -48,25 +48,25 @@
 
 	clocks {
 		ckil {
-			compatible = "fsl,imx-ckil", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
 
 		ckih1 {
-			compatible = "fsl,imx-ckih1", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <0>;
 		};
 
 		ckih2 {
-			compatible = "fsl,imx-ckih2", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <0>;
 		};
 
 		osc {
-			compatible = "fsl,imx-osc", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <24000000>;
 		};
@@ -114,7 +114,7 @@
 		ports = <&ipu_di0>, <&ipu_di1>;
 	};
 
-	soc {
+	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
@@ -124,6 +124,9 @@
 		iram: sram@1ffe0000 {
 			compatible = "mmio-sram";
 			reg = <0x1ffe0000 0x20000>;
+			ranges = <0 0x1ffe0000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 		};
 
 		gpu: gpu@30000000 {
@@ -171,14 +174,14 @@
 			};
 		};
 
-		bus@70000000 { /* AIPS1 */
+		aips1: bus@70000000 { /* AIPS1 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0x70000000 0x10000000>;
 			ranges;
 
-			spba@70000000 {
+			spba-bus@70000000 {
 				compatible = "fsl,spba-bus", "simple-bus";
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -215,6 +218,8 @@
 					clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
 						 <&clks IMX5_CLK_UART3_PER_GATE>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 43 5 1>, <&sdma 44 5 2>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
@@ -394,7 +399,7 @@
 				clock-names = "ipg", "per";
 			};
 
-			iomuxc: iomuxc@73fa8000 {
+			iomuxc: pinctrl@73fa8000 {
 				compatible = "fsl,imx51-iomuxc";
 				reg = <0x73fa8000 0x4000>;
 			};
@@ -426,6 +431,8 @@
 				clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
 					 <&clks IMX5_CLK_UART1_PER_GATE>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma 18 4 1>, <&sdma 19 4 2>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -436,6 +443,8 @@
 				clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
 					 <&clks IMX5_CLK_UART2_PER_GATE>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma 16 4 1>, <&sdma 17 4 2>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -446,15 +455,15 @@
 				#reset-cells = <1>;
 			};
 
-			clks: ccm@73fd4000{
+			clks: ccm@73fd4000 {
 				compatible = "fsl,imx51-ccm";
 				reg = <0x73fd4000 0x4000>;
-				interrupts = <0 71 0x04 0 72 0x04>;
+				interrupts = <71>, <72>;
 				#clock-cells = <1>;
 			};
 		};
 
-		bus@80000000 {	/* AIPS2 */
+		aips2: bus@80000000 {	/* AIPS2 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -467,7 +476,7 @@
 			};
 
 			iim: efuse@83f98000 {
-				compatible = "fsl,imx51-iim", "fsl,imx27-iim", "syscon";
+				compatible = "fsl,imx51-iim";
 				reg = <0x83f98000 0x4000>;
 				interrupts = <69>;
 				clocks = <&clks IMX5_CLK_IIM_GATE>;
@@ -498,7 +507,7 @@
 				status = "disabled";
 			};
 
-			sdma: sdma@83fb0000 {
+			sdma: dma-controller@83fb0000 {
 				compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
 				reg = <0x83fb0000 0x4000>;
 				interrupts = <6>;
@@ -569,7 +578,7 @@
 				reg = <0x83fd8000 0x1000>;
 			};
 
-			weim: weim@83fda000 {
+			weim: memory-controller@83fda000 {
 				#address-cells = <2>;
 				#size-cells = <1>;
 				compatible = "fsl,imx51-weim";
@@ -586,7 +595,7 @@
 				status = "disabled";
 			};
 
-			nfc: nand@83fdb000 {
+			nfc: nand-controller@83fdb000 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				compatible = "fsl,imx51-nand";
@@ -642,7 +651,7 @@
 			};
 
 			sahara: crypto@83ff8000 {
-				compatible = "fsl,imx53-sahara", "fsl,imx51-sahara";
+				compatible = "fsl,imx53-sahara";
 				reg = <0x83ff8000 0x4000>;
 				interrupts = <19 20>;
 				clocks = <&clks IMX5_CLK_SAHARA_IPG_GATE>,
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-ard.dts b/arch/arm/boot/dts/nxp/imx/imx53-ard.dts
new file mode 100644
index 000000000000..e580427660b1
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-ard.dts
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "imx53.dtsi"
+
+/ {
+	model = "Freescale i.MX53 Automotive Reference Design Board";
+	compatible = "fsl,imx53-ard", "fsl,imx53";
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x40000000>;
+	};
+
+	eim-cs1@f4000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,eim-bus", "simple-bus";
+		reg = <0xf4000000 0x3ff0000>;
+		ranges;
+
+		ethernet@f4000000 {
+			compatible = "smsc,lan9220", "smsc,lan9115";
+			reg = <0xf4000000 0x2000000>;
+			phy-mode = "mii";
+			interrupt-parent = <&gpio2>;
+			interrupts = <31 0x8>;
+			reg-io-width = <4>;
+			/*
+			 * VDD33A and VDDVARIO of LAN9220 are supplied by
+			 * SW4_3V3 of LTC3589.  Before the regulator driver
+			 * for this PMIC is available, we use a fixed dummy
+			 * 3V3 regulator to get LAN9220 driver probing work.
+			 */
+			vdd33a-supply = <&reg_3p3v>;
+			vddvario-supply = <&reg_3p3v>;
+			smsc,irq-push-pull;
+		};
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-home {
+			label = "Home";
+			gpios = <&gpio5 10 0>;
+			linux,code = <KEY_HOME>;
+			wakeup-source;
+		};
+
+		key-back {
+			label = "Back";
+			gpios = <&gpio5 11 0>;
+			linux,code = <KEY_BACK>;
+			wakeup-source;
+		};
+
+		key-program {
+			label = "Program";
+			gpios = <&gpio5 12 0>;
+			linux,code = <KEY_PROGRAM >;
+			wakeup-source;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio5 13 0>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio4 0 0>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX53_PAD_GPIO_1__GPIO1_1             0x80000000
+			MX53_PAD_GPIO_9__GPIO1_9             0x80000000
+			MX53_PAD_EIM_EB3__GPIO2_31           0x80000000
+			MX53_PAD_GPIO_10__GPIO4_0            0x80000000
+			MX53_PAD_DISP0_DAT16__GPIO5_10	     0x80000000
+			MX53_PAD_DISP0_DAT17__GPIO5_11       0x80000000
+			MX53_PAD_DISP0_DAT18__GPIO5_12       0x80000000
+			MX53_PAD_DISP0_DAT19__GPIO5_13       0x80000000
+			MX53_PAD_EIM_D16__EMI_WEIM_D_16      0x80000000
+			MX53_PAD_EIM_D17__EMI_WEIM_D_17      0x80000000
+			MX53_PAD_EIM_D18__EMI_WEIM_D_18      0x80000000
+			MX53_PAD_EIM_D19__EMI_WEIM_D_19      0x80000000
+			MX53_PAD_EIM_D20__EMI_WEIM_D_20      0x80000000
+			MX53_PAD_EIM_D21__EMI_WEIM_D_21      0x80000000
+			MX53_PAD_EIM_D22__EMI_WEIM_D_22      0x80000000
+			MX53_PAD_EIM_D23__EMI_WEIM_D_23      0x80000000
+			MX53_PAD_EIM_D24__EMI_WEIM_D_24      0x80000000
+			MX53_PAD_EIM_D25__EMI_WEIM_D_25      0x80000000
+			MX53_PAD_EIM_D26__EMI_WEIM_D_26      0x80000000
+			MX53_PAD_EIM_D27__EMI_WEIM_D_27      0x80000000
+			MX53_PAD_EIM_D28__EMI_WEIM_D_28      0x80000000
+			MX53_PAD_EIM_D29__EMI_WEIM_D_29      0x80000000
+			MX53_PAD_EIM_D30__EMI_WEIM_D_30      0x80000000
+			MX53_PAD_EIM_D31__EMI_WEIM_D_31      0x80000000
+			MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 0x80000000
+			MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 0x80000000
+			MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 0x80000000
+			MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 0x80000000
+			MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 0x80000000
+			MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 0x80000000
+			MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 0x80000000
+			MX53_PAD_EIM_OE__EMI_WEIM_OE	     0x80000000
+			MX53_PAD_EIM_RW__EMI_WEIM_RW	     0x80000000
+			MX53_PAD_EIM_CS1__EMI_WEIM_CS_1	     0x80000000
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+			MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+			MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+			MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+			MX53_PAD_PATA_DATA8__ESDHC1_DAT4	0x1d5
+			MX53_PAD_PATA_DATA9__ESDHC1_DAT5	0x1d5
+			MX53_PAD_PATA_DATA10__ESDHC1_DAT6	0x1d5
+			MX53_PAD_PATA_DATA11__ESDHC1_DAT7	0x1d5
+			MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+			MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
+			MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
+		>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53-cx9020.dts b/arch/arm/boot/dts/nxp/imx/imx53-cx9020.dts
index cfb18849a92b..0814f5665a59 100644
--- a/arch/arm/boot/dts/imx53-cx9020.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx53-cx9020.dts
@@ -22,7 +22,7 @@
 	};
 
 	display-0 {
-		#address-cells =<1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "fsl,imx-parallel-display";
 		interface-pix-fmt = "rgb24";
@@ -86,27 +86,27 @@
 	leds {
 		compatible = "gpio-leds";
 
-		pwr-r {
+		led-pwr-r {
 			gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		pwr-g {
+		led-pwr-g {
 			gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 
-		pwr-b {
+		led-pwr-b {
 			gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		sd1-b {
+		led-sd1-b {
 			linux,default-trigger = "mmc0";
 			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
 		};
 
-		sd2-b {
+		led-sd2-b {
 			linux,default-trigger = "mmc1";
 			gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-kp-ddc.dts b/arch/arm/boot/dts/nxp/imx/imx53-kp-ddc.dts
new file mode 100644
index 000000000000..9c480e4d27ce
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-kp-ddc.dts
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+#include "imx53-kp.dtsi"
+
+/ {
+	model = "K+P imx53 DDC";
+	compatible = "kiebackpeter,imx53-ddc", "fsl,imx53";
+
+	backlight_lcd: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 50000 0>;
+		power-supply = <&reg_backlight>;
+		brightness-levels = <0 24 28 32 36
+				     40 44 48 52 56
+				     60 64 68 72 76
+				     80 84 88 92 96 100>;
+		default-brightness-level = <20>;
+	};
+
+	lcd_display: display {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_disp>;
+
+		port@0 {
+			reg = <0>;
+
+			display1_in: endpoint {
+				remote-endpoint = <&ipu_di1_disp1>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	lcd_panel: lcd-panel {
+		compatible = "koe,tx14d24vm1bpa";
+		backlight = <&backlight_lcd>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	reg_backlight: regulator-backlight {
+		compatible = "regulator-fixed";
+		regulator-name = "backlight-supply";
+		regulator-min-microvolt = <15000000>;
+		regulator-max-microvolt = <15000000>;
+		regulator-always-on;
+	};
+};
+
+&fec {
+	status = "okay";
+};
+
+&i2c3 {
+	adc@48 {
+		compatible = "ti,ads1015";
+		reg = <0x48>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@4 {
+			reg = <4>;
+			ti,gain = <2>;
+			ti,datarate = <4>;
+		};
+
+		channel@6 {
+			reg = <6>;
+			ti,gain = <2>;
+			ti,datarate = <4>;
+		};
+	};
+
+	gpio-expander2@21 {
+		compatible = "nxp,pcf8574";
+		reg = <0x21>;
+		interrupts = <109>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+};
+
+&iomuxc {
+	pinctrl_disp: dispgrp {
+		fsl,pins = <
+			MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK      0x4
+			MX53_PAD_EIM_DA10__IPU_DI1_PIN15        0x4
+			MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0       0x4
+			MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1       0x4
+			MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2       0x4
+			MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3       0x4
+			MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4       0x4
+			MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5       0x4
+			MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6       0x4
+			MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7       0x4
+			MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8       0x4
+			MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9       0x4
+			MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10      0x4
+			MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11      0x4
+			MX53_PAD_EIM_A17__IPU_DISP1_DAT_12      0x4
+			MX53_PAD_EIM_A18__IPU_DISP1_DAT_13      0x4
+			MX53_PAD_EIM_A19__IPU_DISP1_DAT_14      0x4
+			MX53_PAD_EIM_A20__IPU_DISP1_DAT_15      0x4
+			MX53_PAD_EIM_A21__IPU_DISP1_DAT_16      0x4
+			MX53_PAD_EIM_A22__IPU_DISP1_DAT_17      0x4
+			MX53_PAD_EIM_A23__IPU_DISP1_DAT_18      0x4
+			MX53_PAD_EIM_A24__IPU_DISP1_DAT_19      0x4
+			MX53_PAD_EIM_D31__IPU_DISP1_DAT_20      0x4
+			MX53_PAD_EIM_D30__IPU_DISP1_DAT_21      0x4
+			MX53_PAD_EIM_D26__IPU_DISP1_DAT_22      0x4
+			MX53_PAD_EIM_D27__IPU_DISP1_DAT_23      0x4
+			MX53_PAD_GPIO_1__PWM2_PWMO 0x4
+		>;
+	};
+};
+
+&ipu_di1_disp1 {
+	remote-endpoint = <&display1_in>;
+};
+
+&pmic {
+	fsl,mc13xxx-uses-touch;
+};
diff --git a/arch/arm/boot/dts/imx53-kp-hsc.dts b/arch/arm/boot/dts/nxp/imx/imx53-kp-hsc.dts
index 6e3d71baac0f..6e3d71baac0f 100644
--- a/arch/arm/boot/dts/imx53-kp-hsc.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx53-kp-hsc.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-kp.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-kp.dtsi
new file mode 100644
index 000000000000..543cf723008f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-kp.dtsi
@@ -0,0 +1,187 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+#include "imx53-tqma53.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	buzzer {
+		compatible = "pwm-beeper";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_buzzer>;
+		pwms = <&pwm1 0 500000 0>;
+	};
+
+	gpio-buttons {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiobuttons>;
+
+		button-kalt {
+			label = "Kaltstart";
+			linux,code = <KEY_F6>;
+			gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+		};
+
+		button-pwr {
+			label = "PowerFailInterrupt";
+			linux,code = <KEY_F7>;
+			gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-bus {
+			label = "bus";
+			gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+			default-state = "off";
+		};
+
+		led-error {
+			label = "error";
+			gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+			default-state = "off";
+		};
+
+		led-flash {
+			label = "flash";
+			gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	gpio-expander1@22 {
+		compatible = "nxp,pcf8574";
+		reg = <0x22>;
+		interrupts = <109>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kp_common>;
+
+	pinctrl_buzzer: buzzergrp {
+		fsl,pins = <
+			MX53_PAD_SD1_DATA3__PWM1_PWMO 0x1e4
+		>;
+	};
+
+	pinctrl_gpiobuttons: gpiobuttonsgrp {
+		fsl,pins = <
+			MX53_PAD_EIM_RW__GPIO2_26 0x1e4
+			MX53_PAD_EIM_D22__GPIO3_22 0x1e4
+		>;
+	};
+
+	pinctrl_kp_common: kpcommongrp {
+		fsl,pins = <
+			MX53_PAD_EIM_CS0__GPIO2_23 0x1e4
+			MX53_PAD_GPIO_19__GPIO4_5  0x1e4
+			MX53_PAD_PATA_DATA6__GPIO2_6 0x1e4
+			MX53_PAD_PATA_DATA7__GPIO2_7 0xe0
+			MX53_PAD_CSI0_DAT14__GPIO6_0 0x1e4
+			MX53_PAD_CSI0_DAT16__GPIO6_2 0x1e4
+			MX53_PAD_CSI0_DAT18__GPIO6_4 0x1e4
+			MX53_PAD_EIM_D17__GPIO3_17 0x1e4
+			MX53_PAD_EIM_D18__GPIO3_18 0x1e4
+			MX53_PAD_EIM_D21__GPIO3_21 0x1e4
+			MX53_PAD_EIM_D29__GPIO3_29 0x1e4
+			MX53_PAD_EIM_DA11__GPIO3_11 0x1e4
+			MX53_PAD_EIM_DA13__GPIO3_13 0x1e4
+			MX53_PAD_EIM_DA14__GPIO3_14 0x1e4
+			MX53_PAD_SD1_DATA0__GPIO1_16 0x1e4
+			MX53_PAD_SD1_CMD__GPIO1_18 0x1e4
+			MX53_PAD_SD1_CLK__GPIO1_20 0x1e4
+		>;
+	};
+
+	pinctrl_leds: ledgrp {
+		fsl,pins = <
+			MX53_PAD_EIM_EB2__GPIO2_30 0x1d4
+			MX53_PAD_EIM_D28__GPIO3_28 0x1d4
+			MX53_PAD_EIM_WAIT__GPIO5_0 0x1d4
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX53_PAD_CSI0_DAT12__UART4_TXD_MUX 0x1e4
+			MX53_PAD_CSI0_DAT13__UART4_RXD_MUX 0x1e4
+		>;
+	};
+};
+
+&pinctrl_uart1 {
+	fsl,pins = <
+		MX53_PAD_EIM_D23__GPIO3_23 0x1e4
+		MX53_PAD_EIM_EB3__GPIO2_31 0x1e4
+		MX53_PAD_EIM_D24__GPIO3_24 0x1e4
+		MX53_PAD_EIM_D25__GPIO3_25 0x1e4
+		MX53_PAD_EIM_D19__GPIO3_19 0x1e4
+		MX53_PAD_EIM_D20__GPIO3_20 0x1e4
+	>;
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-m53.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-m53.dtsi
new file mode 100644
index 000000000000..89b17509ad48
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-m53.dtsi
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2014 Marek Vasut <marex@denx.de>
+ */
+
+#include "imx53.dtsi"
+
+/ {
+	model = "Aries/DENX M53";
+	compatible = "aries,imx53-m53", "denx,imx53-m53", "fsl,imx53";
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x20000000>,
+		      <0xb0000000 0x20000000>;
+	};
+
+	reg_3p2v: regulator-3p2v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P2V";
+		regulator-min-microvolt = <3200000>;
+		regulator-max-microvolt = <3200000>;
+		regulator-always-on;
+	};
+
+	reg_backlight: regulator-backlight {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-supply";
+		regulator-min-microvolt = <3200000>;
+		regulator-max-microvolt = <3200000>;
+		regulator-always-on;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchscreen@41 {
+		compatible = "st,stmpe610";
+		reg = <0x41>;
+		id = <0>;
+		blocks = <0x5>;
+		interrupts = <6 0x0>;
+		interrupt-parent = <&gpio7>;
+		irq-trigger = <0x1>;
+
+		touchscreen {
+			compatible = "st,stmpe-ts";
+			st,sample-time = <4>;
+			st,mod-12b = <1>;
+			st,ref-sel = <0>;
+			st,adc-freq = <1>;
+			st,ave-ctrl = <3>;
+			st,touch-det-delay = <3>;
+			st,settling = <4>;
+			st,fraction-z = <7>;
+			st,i-drive = <1>;
+		};
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	rtc: rtc@68 {
+		compatible = "st,m41t62";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK	0x80000000
+			MX53_PAD_EIM_EB3__GPIO2_31		0x80000000
+			MX53_PAD_PATA_DA_0__GPIO7_6		0x80000000
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D16__I2C2_SDA		0xc0000000
+			MX53_PAD_EIM_EB2__I2C2_SCL		0xc0000000
+		>;
+	};
+
+	pinctrl_nand: nandgrp {
+		fsl,pins = <
+			MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B	0x4
+			MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B	0x4
+			MX53_PAD_NANDF_CLE__EMI_NANDF_CLE	0x4
+			MX53_PAD_NANDF_ALE__EMI_NANDF_ALE	0x4
+			MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B	0xe0
+			MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0	0xe0
+			MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0	0x4
+			MX53_PAD_PATA_DATA0__EMI_NANDF_D_0	0xa4
+			MX53_PAD_PATA_DATA1__EMI_NANDF_D_1	0xa4
+			MX53_PAD_PATA_DATA2__EMI_NANDF_D_2	0xa4
+			MX53_PAD_PATA_DATA3__EMI_NANDF_D_3	0xa4
+			MX53_PAD_PATA_DATA4__EMI_NANDF_D_4	0xa4
+			MX53_PAD_PATA_DATA5__EMI_NANDF_D_5	0xa4
+			MX53_PAD_PATA_DATA6__EMI_NANDF_D_6	0xa4
+			MX53_PAD_PATA_DATA7__EMI_NANDF_D_7	0xa4
+		>;
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nand>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-m53evk.dts b/arch/arm/boot/dts/nxp/imx/imx53-m53evk.dts
new file mode 100644
index 000000000000..eb3d66305395
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-m53evk.dts
@@ -0,0 +1,360 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2013 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+#include "imx53-m53.dtsi"
+
+/ {
+	model = "Aries/DENX M53EVK";
+	compatible = "aries,imx53-m53evk", "denx,imx53-m53evk", "fsl,imx53";
+
+	display1: disp1 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp1>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing-800x480p60 {
+				clock-frequency = <31500000>;
+				hactive = <800>;
+				vactive = <480>;
+				hfront-porch = <40>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				vback-porch = <33>;
+				vfront-porch = <9>;
+				vsync-len = <3>;
+				vsync-active = <1>;
+			};
+		};
+
+		port {
+			display1_in: endpoint {
+				remote-endpoint = <&ipu_di1_disp1>;
+			};
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 3000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		power-supply = <&reg_backlight>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_gpio>;
+
+		led-user1 {
+			label = "user1";
+			gpios = <&gpio2 8 0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-user2 {
+			label = "user2";
+			gpios = <&gpio2 9 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_usbh1_vbus: regulator-usbh1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 2 0>;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 4 0>;
+	};
+
+	sound {
+		compatible = "fsl,imx53-m53evk-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx53-m53evk-sgtl5000";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"Ext Spk", "LINE_OUT";
+		mux-int-port = <2>;
+		mux-ext-port = <4>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_3p2v>;
+		VDDIO-supply = <&reg_3p2v>;
+		clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_usb: usbgrp {
+		fsl,pins = <
+			MX53_PAD_GPIO_2__GPIO1_2		0x80000000
+			MX53_PAD_GPIO_3__USBOH3_USBH1_OC	0x80000000
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX53_PAD_GPIO_4__GPIO1_4		0x000b0
+		>;
+	};
+
+	led_pin_gpio: ledgpiogrp {
+		fsl,pins = <
+			MX53_PAD_PATA_DATA8__GPIO2_8		0x80000000
+			MX53_PAD_PATA_DATA9__GPIO2_9		0x80000000
+		>;
+	};
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC	0x80000000
+			MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD	0x80000000
+			MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS	0x80000000
+			MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD	0x80000000
+		>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX53_PAD_GPIO_7__CAN1_TXCAN		0x80000000
+			MX53_PAD_GPIO_8__CAN1_RXCAN		0x80000000
+		>;
+	};
+
+	pinctrl_can2: can2grp {
+		fsl,pins = <
+			MX53_PAD_KEY_COL4__CAN2_TXCAN		0x80000000
+			MX53_PAD_KEY_ROW4__CAN2_RXCAN		0x80000000
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+			MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+			MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+			MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+			MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+			MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
+			MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
+			MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
+			MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
+			MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
+			MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
+			MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
+			MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+			MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
+			MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D21__I2C1_SCL		0xc0000000
+			MX53_PAD_EIM_D28__I2C1_SDA		0xc0000000
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX53_PAD_GPIO_6__I2C3_SDA		0xc0000000
+			MX53_PAD_GPIO_5__I2C3_SCL		0xc0000000
+		>;
+	};
+
+	pinctrl_ipu_disp1: ipudisp1grp {
+		fsl,pins = <
+			MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0	0x5
+			MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1	0x5
+			MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2	0x5
+			MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3	0x5
+			MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4	0x5
+			MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5	0x5
+			MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6	0x5
+			MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7	0x5
+			MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8	0x5
+			MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9	0x5
+			MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10	0x5
+			MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11	0x5
+			MX53_PAD_EIM_A17__IPU_DISP1_DAT_12	0x5
+			MX53_PAD_EIM_A18__IPU_DISP1_DAT_13	0x5
+			MX53_PAD_EIM_A19__IPU_DISP1_DAT_14	0x5
+			MX53_PAD_EIM_A20__IPU_DISP1_DAT_15	0x5
+			MX53_PAD_EIM_A21__IPU_DISP1_DAT_16	0x5
+			MX53_PAD_EIM_A22__IPU_DISP1_DAT_17	0x5
+			MX53_PAD_EIM_A23__IPU_DISP1_DAT_18	0x5
+			MX53_PAD_EIM_A24__IPU_DISP1_DAT_19	0x5
+			MX53_PAD_EIM_D31__IPU_DISP1_DAT_20	0x5
+			MX53_PAD_EIM_D30__IPU_DISP1_DAT_21	0x5
+			MX53_PAD_EIM_D26__IPU_DISP1_DAT_22	0x5
+			MX53_PAD_EIM_D27__IPU_DISP1_DAT_23	0x5
+			MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK	0x5
+			MX53_PAD_EIM_DA13__IPU_DI1_D0_CS	0x5
+			MX53_PAD_EIM_DA14__IPU_DI1_D1_CS	0x5
+			MX53_PAD_EIM_DA15__IPU_DI1_PIN1		0x5
+			MX53_PAD_EIM_DA11__IPU_DI1_PIN2		0x5
+			MX53_PAD_EIM_DA12__IPU_DI1_PIN3		0x5
+			MX53_PAD_EIM_A25__IPU_DI1_PIN12		0x5
+			MX53_PAD_EIM_DA10__IPU_DI1_PIN15	0x5
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX53_PAD_DISP0_DAT8__PWM1_PWMO		0x5
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
+			MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
+			MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
+			MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
+			MX53_PAD_PATA_DA_1__UART3_CTS		0x1e4
+			MX53_PAD_PATA_DA_2__UART3_RTS		0x1e4
+		>;
+	};
+};
+
+&ipu_di1_disp1 {
+	remote-endpoint = <&display1_in>;
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb>;
+	vbus-supply = <&reg_usbh1_vbus>;
+	phy_type = "utmi";
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "otg";
+	vbus-supply = <&reg_usb_otg_vbus>;
+	disable-over-current;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-m53menlo.dts b/arch/arm/boot/dts/nxp/imx/imx53-m53menlo.dts
new file mode 100644
index 000000000000..6210673f93be
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-m53menlo.dts
@@ -0,0 +1,516 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+#include "imx53-m53.dtsi"
+
+/ {
+	model = "MENLO M53 EMBEDDED DEVICE";
+	compatible = "menlo,m53menlo", "fsl,imx53";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pinctrl_power_button>;
+		pinctrl-names = "default";
+
+		power-button {
+			label = "Power button";
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pinctrl_power_out>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		led-user1 {
+			label = "TestLed601";
+			gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+		};
+
+		led-user2 {
+			label = "TestLed602";
+			gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-eth {
+			label = "EthLedYe";
+			gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "netdev";
+		};
+	};
+
+	lvds-decoder {
+		compatible = "ti,ds90cf364a", "lvds-decoder";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_decoder_in: endpoint {
+					data-mapping = "jeida-18";
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_decoder_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+
+	panel {
+		compatible = "edt,etm0700g0dh6";
+		pinctrl-0 = <&pinctrl_display_gpio>;
+		pinctrl-names = "default";
+		enable-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds_decoder_out>;
+			};
+		};
+	};
+
+	beeper {
+		compatible = "gpio-beeper";
+		pinctrl-0 = <&pinctrl_beeper>;
+		gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_usbh1_vbus: regulator-usbh1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 2 0>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX5_CLK_CKO1_SEL>,
+			  <&clks IMX5_CLK_CKO1_PODF>,
+			  <&clks IMX5_CLK_CKO1>;
+	assigned-clock-parents = <&clks IMX5_CLK_AHB>;
+	assigned-clock-rates = <133333334>, <33333334>, <33333334>;
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>, <&gpio2 27 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	spidev@0 {
+		compatible = "menlo,m53cpld";
+		spi-max-frequency = <25000000>;
+		reg = <0>;
+	};
+
+	spidev@1 {
+		compatible = "menlo,m53cpld";
+		spi-max-frequency = <25000000>;
+		reg = <1>;
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio7 7 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"TestPin_SV2_3", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"CPLD_JTAG_TDI", "CPLD_JTAG_TMS", "", "",
+		"", "CPLD_JTAG_TDO", "", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "CPLD_JTAG_TCK", "KBD_intK",
+		"CPLD_int", "CPLD_JTAG_internal", "CPLD_D[0]", "CPLD_D[1]",
+		"CPLD_D[2]", "CPLD_D[3]", "CPLD_D[4]", "CPLD_D[5]",
+		"CPLD_D[6]", "CPLD_D[7]", "DISP_reset", "KBD_intI";
+};
+
+&gpio6 {
+	gpio-line-names =
+		"", "", "", "",
+		"CPLD_reset", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio7 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "USB-OTG_OverCurrent", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_edt_ft5x06>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
+		wake-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	dac@60 {
+		compatible = "microchip,mcp4725";
+		reg = <0x60>;
+	};
+};
+
+&i2c2 {
+	touchscreen@41 {
+		status = "disabled";
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	hoggrp {
+		fsl,pins = <
+			MX53_PAD_GPIO_19__CCM_CLKO		0x1e4
+			MX53_PAD_CSI0_DATA_EN__GPIO5_20		0x1e4
+			MX53_PAD_CSI0_DAT4__GPIO5_22		0x1e4
+			MX53_PAD_CSI0_DAT5__GPIO5_23		0x1c4
+			MX53_PAD_CSI0_DAT6__GPIO5_24		0x1e4
+			MX53_PAD_CSI0_DAT7__GPIO5_25		0x1e4
+			MX53_PAD_CSI0_DAT8__GPIO5_26		0x1e4
+			MX53_PAD_CSI0_DAT9__GPIO5_27		0x1c4
+			MX53_PAD_CSI0_DAT10__GPIO5_28		0x1e4
+			MX53_PAD_CSI0_DAT11__GPIO5_29		0x1e4
+			MX53_PAD_PATA_DATA11__GPIO2_11		0x1e4
+			MX53_PAD_EIM_D24__GPIO3_24		0x1e4
+			MX53_PAD_EIM_D25__GPIO3_25		0x1e4
+			MX53_PAD_EIM_D29__GPIO3_29		0x1e4
+			MX53_PAD_CSI0_PIXCLK__GPIO5_18		0x1e4
+			MX53_PAD_CSI0_VSYNC__GPIO5_21		0x1e4
+			MX53_PAD_CSI0_DAT18__GPIO6_4		0x1c4
+			MX53_PAD_PATA_DATA8__GPIO2_8		0x1e4
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX53_PAD_CSI0_DAT15__GPIO6_1		0x1c4
+			MX53_PAD_CSI0_DAT16__GPIO6_2		0x1c4
+		>;
+	};
+
+	pinctrl_beeper: beepergrp {
+		fsl,pins = <
+			MX53_PAD_CSI0_DAT17__GPIO6_3		0x1c4
+		>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX53_PAD_GPIO_7__CAN1_TXCAN		0x1c4
+			MX53_PAD_GPIO_8__CAN1_RXCAN		0x1c4
+		>;
+	};
+
+	pinctrl_can2: can2grp {
+		fsl,pins = <
+			MX53_PAD_KEY_COL4__CAN2_TXCAN		0x1e4
+			MX53_PAD_KEY_ROW4__CAN2_RXCAN		0x1c4
+		>;
+	};
+
+	pinctrl_display_gpio: display-gpiogrp {
+		fsl,pins = <
+			MX53_PAD_CSI0_DAT12__GPIO5_30		0x1c4 /* Reset */
+			MX53_PAD_CSI0_MCLK__GPIO5_19		0x1e4 /* Int-K */
+			MX53_PAD_CSI0_DAT13__GPIO5_31		0x1c4 /* Int-I */
+
+			MX53_PAD_CSI0_DAT14__GPIO6_0		0x1c4 /* Power down */
+		>;
+	};
+
+	pinctrl_edt_ft5x06: edt-ft5x06grp {
+		fsl,pins = <
+			MX53_PAD_PATA_DATA9__GPIO2_9		0x1e4 /* Reset */
+			MX53_PAD_CSI0_DAT19__GPIO6_5		0x1c4 /* Interrupt */
+			MX53_PAD_PATA_DATA10__GPIO2_10		0x1e4 /* Wake */
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX53_PAD_EIM_CS0__ECSPI2_SCLK		0xe4
+			MX53_PAD_EIM_OE__ECSPI2_MISO		0xe4
+			MX53_PAD_EIM_CS1__ECSPI2_MOSI		0xe4
+			MX53_PAD_EIM_RW__GPIO2_26		0xe4
+			MX53_PAD_EIM_LBA__GPIO2_27		0xe4
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1e4
+			MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1e4
+			MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1e4
+			MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1e4
+			MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1e4
+			MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1e4
+			MX53_PAD_GPIO_1__GPIO1_1		0x1c4
+			MX53_PAD_GPIO_9__GPIO1_9		0x1e4
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX53_PAD_FEC_MDC__FEC_MDC		0x1e4
+			MX53_PAD_FEC_MDIO__FEC_MDIO		0x1e4
+			MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x1e4
+			MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x1e4
+			MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x1e4
+			MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x1e4
+			MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x1e4
+			MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x1c4
+			MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x1e4
+			MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x1e4
+			MX53_PAD_PATA_DA_1__GPIO7_7		0x1e4
+			MX53_PAD_EIM_EB3__GPIO2_31		0x1e4
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D21__I2C1_SCL		0x400001e4
+			MX53_PAD_EIM_D28__I2C1_SDA		0x400001e4
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX53_PAD_GPIO_6__I2C3_SDA		0x400001e4
+			MX53_PAD_GPIO_5__I2C3_SCL		0x400001e4
+		>;
+	};
+
+	pinctrl_lvds0: lvds0grp {
+		/* LVDS pins only have pin mux configuration */
+		fsl,pins = <
+			MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK	0x80000000
+			MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0	0x80000000
+			MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1	0x80000000
+			MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2	0x80000000
+			MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3	0x80000000
+		>;
+	};
+
+	pinctrl_power_button: powerbutgrp {
+		fsl,pins = <
+			MX53_PAD_SD2_DATA0__GPIO1_15		0x1e4
+		>;
+	};
+
+	pinctrl_power_out: poweroutgrp {
+		fsl,pins = <
+			MX53_PAD_SD2_DATA2__GPIO1_13		0x1e4
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
+			MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
+			MX53_PAD_PATA_IORDY__UART1_RTS		0x1e4
+			MX53_PAD_PATA_RESET_B__UART1_CTS	0x1e4
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
+			MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
+			MX53_PAD_PATA_DIOR__UART2_RTS		0x1e4
+			MX53_PAD_PATA_INTRQ__UART2_CTS		0x1e4
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
+			MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
+			MX53_PAD_PATA_DA_2__UART3_RTS		0x1e4
+		>;
+	};
+
+	pinctrl_usb: usbgrp {
+		fsl,pins = <
+			MX53_PAD_GPIO_2__GPIO1_2		0x1c4
+			MX53_PAD_GPIO_3__USBOH3_USBH1_OC	0x1c4
+			MX53_PAD_GPIO_4__GPIO1_4		0x1c4
+			MX53_PAD_GPIO_18__GPIO7_13		0x1c4
+		>;
+	};
+};
+
+&ldb {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lvds0>;
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		reg = <0>;
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		port@2 {
+			reg = <2>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&lvds_decoder_in>;
+			};
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb>;
+	vbus-supply = <&reg_usbh1_vbus>;
+	phy_type = "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-mba53.dts b/arch/arm/boot/dts/nxp/imx/imx53-mba53.dts
new file mode 100644
index 000000000000..3cdb87ac1d7c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-mba53.dts
@@ -0,0 +1,236 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix
+ */
+
+/dts-v1/;
+#include "imx53-tqma53.dtsi"
+
+/ {
+	model = "TQ MBa53 starter kit";
+	compatible = "tq,mba53", "tq,tqma53", "fsl,imx53";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 50000 0>;
+		brightness-levels = <0 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 84 88 92 96 100>;
+		default-brightness-level = <10>;
+		enable-gpios = <&gpio7 7 0>;
+		power-supply = <&reg_backlight>;
+	};
+
+	disp1: disp1 {
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_disp1_1>;
+		interface-pix-fmt = "rgb24";
+		status = "disabled";
+
+		port {
+			display1_in: endpoint {
+				remote-endpoint = <&ipu_di1_disp1>;
+			};
+		};
+	};
+
+	reg_backlight: regulator-backlight {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-supply";
+		gpio = <&gpio2 5 0>;
+		startup-delay-us = <5000>;
+	};
+
+	reg_3p2v: regulator-3p2v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P2V";
+		regulator-min-microvolt = <3200000>;
+		regulator-max-microvolt = <3200000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "tq,imx53-mba53-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx53-mba53-sgtl5000";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <2>;
+		mux-ext-port = <5>;
+	};
+};
+
+&ldb {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lvds1_1>;
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_lvds1_1: lvds1-1-grp {
+		fsl,pins = <
+			MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000
+			MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000
+			MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000
+			MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000
+			MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000
+		>;
+	};
+
+	pinctrl_lvds1_2: lvds1-2-grp {
+		fsl,pins = <
+			MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x80000000
+			MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x80000000
+			MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x80000000
+			MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x80000000
+			MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x80000000
+		>;
+	};
+
+	pinctrl_disp1_1: disp1-1-grp {
+		fsl,pins = <
+			MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK 0x80000000 /* DISP1_CLK */
+			MX53_PAD_EIM_DA10__IPU_DI1_PIN15   0x80000000 /* DISP1_DRDY */
+			MX53_PAD_EIM_D23__IPU_DI1_PIN2     0x80000000 /* DISP1_HSYNC */
+			MX53_PAD_EIM_EB3__IPU_DI1_PIN3     0x80000000 /* DISP1_VSYNC */
+			MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x80000000
+			MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x80000000
+			MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x80000000
+			MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x80000000
+			MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x80000000
+			MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x80000000
+			MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x80000000
+			MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x80000000
+			MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x80000000
+			MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x80000000
+			MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x80000000
+			MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x80000000
+			MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x80000000
+			MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x80000000
+			MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9  0x80000000
+			MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8  0x80000000
+			MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7  0x80000000
+			MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6  0x80000000
+			MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5  0x80000000
+			MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4  0x80000000
+			MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3  0x80000000
+			MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2  0x80000000
+			MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1  0x80000000
+			MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0  0x80000000
+		>;
+	};
+
+	pinctrl_vga_sync_1: vgasync-1-grp {
+		fsl,pins = <
+			/* VGA_VSYNC, HSYNC with max drive strength */
+			MX53_PAD_EIM_CS1__IPU_DI1_PIN6	   0xe6
+			MX53_PAD_EIM_DA15__IPU_DI1_PIN4	   0xe6
+		>;
+	};
+};
+
+&ipu_di1_disp1 {
+	remote-endpoint = <&display1_in>;
+};
+
+&cspi {
+	status = "okay";
+};
+
+&audmux {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+};
+
+&i2c2 {
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
+		VDDA-supply = <&reg_3p2v>;
+		VDDIO-supply = <&reg_3p2v>;
+	};
+
+	expander: pca9554@20 {
+		compatible = "nxp,pca9554";
+		reg = <0x20>;
+		interrupts = <109>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	sensor2: temperature-sensor@49 {
+		compatible = "national,lm75b";
+		reg = <0x49>;
+	};
+};
+
+&fec {
+	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&esdhc2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&ecspi1 {
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&tve {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_vga_sync_1>;
+	ddc-i2c-bus = <&i2c3>;
+	fsl,tve-mode = "vga";
+	fsl,hsync-pin = <4>;
+	fsl,vsync-pin = <6>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx53-pinfunc.h
index 67bd06610fdf..67bd06610fdf 100644
--- a/arch/arm/boot/dts/imx53-pinfunc.h
+++ b/arch/arm/boot/dts/nxp/imx/imx53-pinfunc.h
diff --git a/arch/arm/boot/dts/imx53-ppd.dts b/arch/arm/boot/dts/nxp/imx/imx53-ppd.dts
index 37d0cffea99c..e45a97d3f449 100644
--- a/arch/arm/boot/dts/imx53-ppd.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx53-ppd.dts
@@ -167,7 +167,7 @@
 
 	pwm_bl: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 50000>;
+		pwms = <&pwm2 0 50000 0>;
 		brightness-levels = <0 2 5 7 10 12 15 17 20 22 25 28 30 33 35
 				     38 40 43 45 48 51 53 56 58 61 63 66 68 71
 				     73 76 79 81 84 86 89 91 94 96 99 102 104
@@ -187,7 +187,7 @@
 
 		led-1 {
 			label = "alarm-brightness";
-			pwms = <&pwm1 0 100000>;
+			pwms = <&pwm1 0 100000 0>;
 			max-brightness = <255>;
 		};
 	};
@@ -488,7 +488,7 @@
 	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9547";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -537,6 +537,8 @@
 			mpl3115: pressure-sensor@60 {
 				compatible = "fsl,mpl3115";
 				reg = <0x60>;
+				vdd-supply = <&reg_3v3>;
+				vddio-supply = <&reg_3v3>;
 			};
 
 			eeprom: eeprom@50 {
@@ -593,7 +595,7 @@
 
 	touchscreen@4b {
 		compatible = "atmel,maxtouch";
-		reset-gpio = <&gpio5 19 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>;
 		reg = <0x4b>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
@@ -628,14 +630,12 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
 };
 
 &pwm2 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm2>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-qsb-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-qsb-common.dtsi
new file mode 100644
index 000000000000..1869ad86baf2
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-qsb-common.dtsi
@@ -0,0 +1,406 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+#include "imx53.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x20000000>,
+		      <0xb0000000 0x20000000>;
+	};
+
+	backlight_parallel: backlight-parallel {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+	};
+
+	display0: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp0>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		port@0 {
+			reg = <0>;
+
+			display0_in: endpoint {
+				remote-endpoint = <&ipu_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			display_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power Button";
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_gpio7_7>;
+
+		led-user {
+			label = "Heartbeat";
+			gpios = <&gpio7 7 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	panel_dpi: panel {
+		compatible = "sii,43wvf1g";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_display_power>;
+		backlight = <&backlight_parallel>;
+		enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
+	reg_3p2v: regulator-3p2v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P2V";
+		regulator-min-microvolt = <3200000>;
+		regulator-max-microvolt = <3200000>;
+		regulator-always-on;
+	};
+
+	reg_usb_vbus: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio7 8 0>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "fsl,imx53-qsb-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx53-qsb-sgtl5000";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <2>;
+		mux-ext-port = <5>;
+	};
+};
+
+&cpu0 {
+	/* CPU rated to 1GHz, not 1.2GHz as per the default settings */
+	operating-points = <
+		/* kHz   uV */
+		166666  850000
+		400000  900000
+		800000  1050000
+		1000000 1200000
+	>;
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&ipu_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&esdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc3>;
+	cd-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX53_PAD_GPIO_8__GPIO1_8          0x80000000
+			MX53_PAD_PATA_DATA14__GPIO2_14    0x80000000
+			MX53_PAD_PATA_DATA15__GPIO2_15    0x80000000
+			MX53_PAD_EIM_DA11__GPIO3_11       0x80000000
+			MX53_PAD_EIM_DA12__GPIO3_12       0x80000000
+			MX53_PAD_PATA_DA_0__GPIO7_6       0x80000000
+			MX53_PAD_PATA_DA_2__GPIO7_8	  0x80000000
+			MX53_PAD_GPIO_16__GPIO7_11        0x80000000
+		>;
+	};
+
+	led_pin_gpio7_7: led_gpio7-7-grp {
+		fsl,pins = <
+			MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000
+		>;
+	};
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	0x80000000
+			MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
+			MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
+			MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
+		>;
+	};
+
+	pinctrl_codec: codecgrp {
+		fsl,pins = <
+			MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK	0x1c4
+		>;
+	};
+
+	pinctrl_display_power: displaypowergrp {
+		fsl,pins = <
+			MX53_PAD_EIM_D24__GPIO3_24		0x1e4
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+			MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+			MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+			MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+			MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+			MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+			MX53_PAD_EIM_DA13__GPIO3_13		0xe4
+		>;
+	};
+
+	pinctrl_esdhc3: esdhc3grp {
+		fsl,pins = <
+			MX53_PAD_PATA_DATA8__ESDHC3_DAT0	0x1d5
+			MX53_PAD_PATA_DATA9__ESDHC3_DAT1	0x1d5
+			MX53_PAD_PATA_DATA10__ESDHC3_DAT2	0x1d5
+			MX53_PAD_PATA_DATA11__ESDHC3_DAT3	0x1d5
+			MX53_PAD_PATA_DATA0__ESDHC3_DAT4	0x1d5
+			MX53_PAD_PATA_DATA1__ESDHC3_DAT5	0x1d5
+			MX53_PAD_PATA_DATA2__ESDHC3_DAT6	0x1d5
+			MX53_PAD_PATA_DATA3__ESDHC3_DAT7	0x1d5
+			MX53_PAD_PATA_RESET_B__ESDHC3_CMD	0x1d5
+			MX53_PAD_PATA_IORDY__ESDHC3_CLK		0x1d5
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX53_PAD_FEC_MDC__FEC_MDC		0x4
+			MX53_PAD_FEC_MDIO__FEC_MDIO		0x1fc
+			MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x180
+			MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x180
+			MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x180
+			MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x180
+			MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x180
+			MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x4
+			MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x4
+			MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x4
+		>;
+	};
+
+	/* open drain */
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX53_PAD_CSI0_DAT8__I2C1_SDA		0x400001ec
+			MX53_PAD_CSI0_DAT9__I2C1_SCL		0x400001ec
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX53_PAD_KEY_ROW3__I2C2_SDA		0xc0000000
+			MX53_PAD_KEY_COL3__I2C2_SCL		0xc0000000
+		>;
+	};
+
+	pinctrl_ipu_disp0: ipudisp0grp {
+		fsl,pins = <
+			MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK	0x5
+			MX53_PAD_DI0_PIN15__IPU_DI0_PIN15	0x5
+			MX53_PAD_DI0_PIN2__IPU_DI0_PIN2		0x5
+			MX53_PAD_DI0_PIN3__IPU_DI0_PIN3		0x5
+			MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0	0x5
+			MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1	0x5
+			MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2	0x5
+			MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3	0x5
+			MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4	0x5
+			MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5	0x5
+			MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6	0x5
+			MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7	0x5
+			MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8	0x5
+			MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9	0x5
+			MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10	0x5
+			MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11	0x5
+			MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12	0x5
+			MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13	0x5
+			MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14	0x5
+			MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15	0x5
+			MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16	0x5
+			MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17	0x5
+			MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18	0x5
+			MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19	0x5
+			MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20	0x5
+			MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21	0x5
+			MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22	0x5
+			MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23	0x5
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX53_PAD_GPIO_1__PWM2_PWMO		0x5
+		>;
+	};
+
+	pinctrl_vga_sync: vgasync-grp {
+		fsl,pins = <
+			/* VGA_HSYNC, VSYNC with max drive strength */
+			MX53_PAD_EIM_OE__IPU_DI1_PIN7 0xe6
+			MX53_PAD_EIM_RW__IPU_DI1_PIN8 0xe6
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX53_PAD_CSI0_DAT10__UART1_TXD_MUX	0x1e4
+			MX53_PAD_CSI0_DAT11__UART1_RXD_MUX	0x1e4
+		>;
+	};
+};
+
+&tve {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_vga_sync>;
+	ddc-i2c-bus = <&i2c2>;
+	fsl,tve-mode = "vga";
+	fsl,hsync-pin = <7>;	/* IPU DI1 PIN7 via EIM_OE */
+	fsl,vsync-pin = <8>;	/* IPU DI1 PIN8 via EIM_RW */
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_codec>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_3p2v>;
+		VDDIO-supply = <&reg_3p2v>;
+		clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	accelerometer: mma8450@1c {
+		compatible = "fsl,mma8450";
+		reg = <0x1c>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&vpu {
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_vbus>;
+	phy_type = "utmi";
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-qsb-hdmi.dtso b/arch/arm/boot/dts/nxp/imx/imx53-qsb-hdmi.dtso
new file mode 100644
index 000000000000..2527bfe13145
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-qsb-hdmi.dtso
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * DT overlay for MCIMXHDMICARD as used with the iMX53 QSB or QSRB boards
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	hdmi: connector-hdmi {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&sii9022_out>;
+			};
+		};
+	};
+
+	reg_1p2v: regulator-1p2v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P2V";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		vin-supply = <&reg_3p2v>;
+	};
+};
+
+&display0 {
+	status = "okay";
+
+	port@1 {
+		display0_out: endpoint {
+			remote-endpoint = <&sii9022_in>;
+		};
+	};
+};
+
+&i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	sii9022: bridge-hdmi@39 {
+		compatible = "sil,sii9022";
+		reg = <0x39>;
+		reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+		interrupts-extended = <&gpio3 31 IRQ_TYPE_LEVEL_LOW>;
+		iovcc-supply = <&reg_3p2v>;
+		#sound-dai-cells = <0>;
+		sil,i2s-data-lanes = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				sii9022_in: endpoint {
+					remote-endpoint = <&display0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				sii9022_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+};
+
+&panel_dpi {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/nxp/imx/imx53-qsb.dts
index 6831836bd726..6831836bd726 100644
--- a/arch/arm/boot/dts/imx53-qsb.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx53-qsb.dts
diff --git a/arch/arm/boot/dts/imx53-qsrb.dts b/arch/arm/boot/dts/nxp/imx/imx53-qsrb.dts
index 1bbf24ad308a..6938ad6dbc2c 100644
--- a/arch/arm/boot/dts/imx53-qsrb.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx53-qsrb.dts
@@ -13,12 +13,10 @@
 };
 
 &iomuxc {
-	imx53-qsrb {
-		pinctrl_pmic: pmicgrp {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT5__GPIO5_23	0x1c4 /* IRQ */
-			>;
-		};
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX53_PAD_CSI0_DAT5__GPIO5_23	0x1c4 /* IRQ */
+		>;
 	};
 };
 
@@ -30,6 +28,7 @@
 		reg = <0x08>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,mc13xxx-uses-rtc;
 		regulators {
 			sw1_reg: sw1a {
 				regulator-name = "SW1";
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4-lvds.dts b/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4-lvds.dts
new file mode 100644
index 000000000000..b1c1e7c759b3
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4-lvds.dts
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2023 Linaro Ltd.
+
+/dts-v1/;
+
+#include <dt-bindings/pwm/pwm.h>
+#include "imx53-sk-imx53-atm0700d4.dtsi"
+
+/ {
+	lvds-decoder {
+		compatible = "ti,sn65lvds94", "lvds-decoder";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_decoder_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_decoder_out: endpoint {
+					remote-endpoint = <&panel_rgb_in>;
+				};
+			};
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_lvds0: lvds0grp {
+		/* LVDS pins only have pin mux configuration */
+		fsl,pins = <
+			MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK	0x80000000
+			MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0	0x80000000
+			MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1	0x80000000
+			MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2	0x80000000
+			MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3	0x80000000
+		>;
+	};
+
+	pinctrl_spi_gpio: spigrp {
+		fsl,pins = <
+			MX53_PAD_EIM_A22__GPIO2_16		0x1f4
+			MX53_PAD_EIM_A21__GPIO2_17		0x1f4
+			MX53_PAD_EIM_A16__GPIO2_22		0x1f4
+			MX53_PAD_EIM_A18__GPIO2_20		0x1f4
+		>;
+	};
+};
+
+&ldb {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lvds0>;
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		reg = <0>;
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+		status = "okay";
+
+		port@2 {
+			reg = <2>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&lvds_decoder_in>;
+			};
+		};
+	};
+};
+
+&panel_rgb_in {
+	remote-endpoint = <&lvds_decoder_out>;
+};
+
+&spi_ts {
+	pinctrl-0 = <&pinctrl_spi_gpio>;
+	pinctrl-names = "default";
+
+	sck-gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>;
+	miso-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
+	mosi-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+};
+
+&touchscreen {
+	interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_BOTH>;
+	pendown-gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4-rgb.dts b/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4-rgb.dts
new file mode 100644
index 000000000000..2559ada7e401
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4-rgb.dts
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2023 Linaro Ltd.
+
+/dts-v1/;
+
+#include <dt-bindings/pwm/pwm.h>
+#include "imx53-sk-imx53-atm0700d4.dtsi"
+
+/ {
+	display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb24";
+		pinctrl-0 = <&pinctrl_rgb24>;
+		pinctrl-names = "default";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			display0_in: endpoint {
+				remote-endpoint = <&ipu_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			display_out: endpoint {
+				remote-endpoint = <&panel_rgb_in>;
+			};
+		};
+	};
+
+};
+
+&iomuxc {
+	pinctrl_rgb24: rgb24grp {
+		fsl,pins = <
+			MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK		0x5
+			MX53_PAD_DI0_PIN15__IPU_DI0_PIN15		0x5
+			MX53_PAD_DI0_PIN2__IPU_DI0_PIN2			0x5
+			MX53_PAD_DI0_PIN3__IPU_DI0_PIN3			0x5
+			MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0		0x5
+			MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1		0x5
+			MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2		0x5
+			MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3		0x5
+			MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4		0x5
+			MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5		0x5
+			MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6		0x5
+			MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7		0x5
+			MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8		0x5
+			MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9		0x5
+			MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10		0x5
+			MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11		0x5
+			MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12		0x5
+			MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13		0x5
+			MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14		0x5
+			MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15		0x5
+			MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16		0x5
+			MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17		0x5
+			MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18		0x5
+			MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19		0x5
+			MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20		0x5
+			MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21		0x5
+			MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22		0x5
+			MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23		0x5
+		>;
+	};
+
+	pinctrl_spi_gpio: spigrp {
+		fsl,pins = <
+			MX53_PAD_SD1_DATA1__GPIO1_17		0x1f4
+			MX53_PAD_GPIO_7__GPIO1_7		0x1f4
+			MX53_PAD_PATA_DATA3__GPIO2_3		0x1f4
+			MX53_PAD_PATA_DATA8__GPIO2_8		0x1f4
+		>;
+	};
+};
+
+&ipu_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&panel {
+	enable-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+};
+
+&panel_rgb_in {
+	remote-endpoint = <&display_out>;
+};
+
+&pwm1 {
+	status = "disabled";
+};
+
+&spi_ts {
+	pinctrl-0 = <&pinctrl_spi_gpio>;
+	pinctrl-names = "default";
+
+	sck-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+	mosi-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+	miso-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
+};
+
+&touchscreen {
+	interrupts-extended = <&gpio2 6 IRQ_TYPE_EDGE_BOTH>;
+	pendown-gpio = <&gpio2 6 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4.dtsi
new file mode 100644
index 000000000000..e395004e80e6
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53-atm0700d4.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2023 Linaro Ltd.
+
+/dts-v1/;
+
+#include <dt-bindings/pwm/pwm.h>
+#include "imx53-sk-imx53.dts"
+
+/ {
+	panel: panel-rgb {
+		compatible = "powertip,ph800480t013-idf02";
+
+		port {
+			panel_rgb_in: endpoint {
+			};
+		};
+	};
+
+	spi_ts: spi {
+		compatible = "spi-gpio";
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+
+		num-chipselects = <1>;
+
+		touchscreen: touchscreen@0 {
+			reg = <0>;
+			compatible = "ti,ads7843";
+			spi-max-frequency = <300000>;
+
+			ti,vref-mv = /bits/ 16 <3300>;
+			ti,x-plate-ohms = /bits/ 16 <450>;
+			ti,y-plate-ohms = /bits/ 16 <250>;
+			ti,debounce-tol = /bits/ 16 <10>;
+			ti,debounce-rep = /bits/ 16 <0>;
+			touchscreen-size-x = <4096>;
+			touchscreen-size-y = <4096>;
+			touchscreen-swapped-x-y;
+			touchscreen-max-pressure = <100>;
+
+			wakeup-source;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53.dts b/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53.dts
new file mode 100644
index 000000000000..1a00d290092a
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53.dts
@@ -0,0 +1,367 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2023 Linaro Ltd.
+
+/dts-v1/;
+
+#include "imx53.dtsi"
+
+/ {
+	model = "StarterKit SK-iMX53 Board";
+	compatible = "starterkit,sk-imx53", "fsl,imx53";
+
+	aliases {
+		/*
+		 * iMX RTC is not battery powered on this board.
+		 * Use the i2c RTC as rtc0.
+		 */
+		rtc0 = &rtc;
+		rtc1 = &srtc;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@70000000 {
+		device_type = "memory";
+		/* v2 had only 256 MB, v3 has 512 MB */
+		reg = <0x70000000 0x20000000>;
+	};
+
+	reg_usb1_vbus: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg_vbus: regulator-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio2 24 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&cpu0 {
+	/* CPU rated to 800 MHz, not the default 1.2GHz. */
+	operating-points = <
+		/* kHz   uV */
+		166666  850000
+		400000  900000
+		800000  1050000
+	>;
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&esdhc1 {
+	cd-gpios = <&gpio3 14 GPIO_ACTIVE_LOW>;
+	fsl,wp-controller;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	phy-handle = <&phy0>;
+	mac-address = [000000000000]; /* placeholder; will be overwritten by bootloader */
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+			reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	sda-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	tlv320aic23: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_codec>;
+		#sound-dai-cells = <0>;
+	};
+
+	rtc: rtc@68 {
+		compatible = "dallas,ds1338";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC	0x1e4
+			MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD	0x1e4
+			MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS	0x1e4
+			MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD	0x1e4
+		>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX53_PAD_PATA_INTRQ__CAN1_TXCAN		0x1e4
+			MX53_PAD_PATA_DIOR__CAN1_RXCAN		0x1e4
+		>;
+	};
+
+	pinctrl_codec: codecgrp {
+		fsl,pins = <
+			MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK	0x1c4
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D16__ECSPI1_SCLK		0x1e4
+			MX53_PAD_EIM_D17__ECSPI1_MISO		0x1e4
+			MX53_PAD_EIM_D18__ECSPI1_MOSI		0x1e4
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX53_PAD_CSI0_DAT9__ECSPI2_MOSI		0x1e4
+			MX53_PAD_CSI0_DAT10__ECSPI2_MISO	0x1e4
+			MX53_PAD_EIM_CS0__ECSPI2_SCLK		0x1e4
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+			MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+			MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+			MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+			MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+			MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+			MX53_PAD_EIM_DA14__GPIO3_14		0x1f0
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX53_PAD_FEC_MDC__FEC_MDC		0x1e4
+			MX53_PAD_FEC_MDIO__FEC_MDIO		0x1e4
+			MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x1e4
+			MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x1e4
+			MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x1e4
+			MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x1e4
+			MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x1e4
+			MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x1c4
+			MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x1e4
+			MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x1e4
+			MX53_PAD_GPIO_1__GPIO1_1		0x1c4
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D21__I2C1_SCL		0x400001e4
+			MX53_PAD_EIM_D28__I2C1_SDA		0x400001e4
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX53_PAD_KEY_ROW3__I2C2_SDA             0x400001e4
+			MX53_PAD_EIM_EB2__I2C2_SCL		0x400001e4
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX53_PAD_KEY_ROW3__GPIO4_13		0x1e4
+			MX53_PAD_EIM_EB2__GPIO2_30		0x1e4
+		>;
+	};
+
+	pinctrl_nand: nandgrp {
+		fsl,pins = <
+			MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B	0x4
+			MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B	0x4
+			MX53_PAD_NANDF_CLE__EMI_NANDF_CLE	0x4
+			MX53_PAD_NANDF_ALE__EMI_NANDF_ALE	0x4
+			MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B	0xe0
+			MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0	0xe0
+			MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0	0x4
+			MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1	0x4
+			MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2	0x4
+			MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3	0x4
+			MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0	0xa4
+			MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1	0xa4
+			MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2	0xa4
+			MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3	0xa4
+			MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4	0xa4
+			MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5	0xa4
+			MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6	0xa4
+			MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7	0xa4
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX53_PAD_GPIO_9__PWM1_PWMO		0x5
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
+			MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D24__UART3_TXD_MUX		0x1e4
+			MX53_PAD_EIM_D25__UART3_RXD_MUX		0x1e4
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX53_PAD_KEY_COL0__UART4_TXD_MUX	0x1e4
+			MX53_PAD_KEY_ROW0__UART4_RXD_MUX	0x1e4
+		>;
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nand>;
+	nand-bus-width = <8>;
+	status = "okay";
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x00100000>;
+			read-only;
+		};
+
+		partition@100000 {
+			label = "u-boot";
+			reg = <0x00100000 0x00100000>;
+			read-only;
+		};
+
+		partition@200000 {
+			label = "u-boot-env";
+			reg = <0x00200000 0x00100000>;
+			read-only;
+		};
+
+		partition@1000000 {
+			label = "kernel-safe";
+			reg = <0x01000000 0x00a00000>;
+			read-only;
+		};
+
+		partition@1a00000 {
+			label = "kernel";
+			reg = <0x01a00000 0x005e0000>;
+		};
+
+		partition@2000000 {
+			label = "ubifs";
+			reg = <0x02000000 0x0e000000>;
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	phy_type = "utmi";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "peripheral";
+	disable-over-current;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-smd.dts b/arch/arm/boot/dts/nxp/imx/imx53-smd.dts
new file mode 100644
index 000000000000..386371c816f4
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-smd.dts
@@ -0,0 +1,344 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "imx53.dtsi"
+
+/ {
+	model = "Freescale i.MX53 Smart Mobile Reference Design Board";
+	compatible = "fsl,imx53-smd", "fsl,imx53";
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x40000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio2 14 0>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio2 15 0>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&esdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc2>;
+	non-removable;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio3 19 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	zigbee: mc1323@0 {
+		compatible = "fsl,mc1323";
+		spi-max-frequency = <8000000>;
+		reg = <0>;
+	};
+
+	flash: flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p32", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <1>;
+
+		partition@0 {
+			label = "U-Boot";
+			reg = <0x0 0x40000>;
+			read-only;
+		};
+
+		partition@40000 {
+			label = "Kernel";
+			reg = <0x40000 0x3c0000>;
+		};
+	};
+};
+
+&esdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc3>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000
+			MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000
+			MX53_PAD_EIM_EB2__GPIO2_30     0x80000000
+			MX53_PAD_EIM_DA13__GPIO3_13    0x80000000
+			MX53_PAD_EIM_D19__GPIO3_19     0x80000000
+			MX53_PAD_KEY_ROW2__GPIO4_11    0x80000000
+			MX53_PAD_PATA_DA_0__GPIO7_6    0x80000000
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D16__ECSPI1_SCLK		0x80000000
+			MX53_PAD_EIM_D17__ECSPI1_MISO		0x80000000
+			MX53_PAD_EIM_D18__ECSPI1_MOSI		0x80000000
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+			MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+			MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+			MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+			MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+			MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+		>;
+	};
+
+	pinctrl_esdhc2: esdhc2grp {
+		fsl,pins = <
+			MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
+			MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
+			MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
+			MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
+			MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
+			MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
+		>;
+	};
+
+	pinctrl_esdhc3: esdhc3grp {
+		fsl,pins = <
+			MX53_PAD_PATA_DATA8__ESDHC3_DAT0	0x1d5
+			MX53_PAD_PATA_DATA9__ESDHC3_DAT1	0x1d5
+			MX53_PAD_PATA_DATA10__ESDHC3_DAT2	0x1d5
+			MX53_PAD_PATA_DATA11__ESDHC3_DAT3	0x1d5
+			MX53_PAD_PATA_DATA0__ESDHC3_DAT4	0x1d5
+			MX53_PAD_PATA_DATA1__ESDHC3_DAT5	0x1d5
+			MX53_PAD_PATA_DATA2__ESDHC3_DAT6	0x1d5
+			MX53_PAD_PATA_DATA3__ESDHC3_DAT7	0x1d5
+			MX53_PAD_PATA_RESET_B__ESDHC3_CMD	0x1d5
+			MX53_PAD_PATA_IORDY__ESDHC3_CLK		0x1d5
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
+			MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
+			MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
+			MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
+			MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
+			MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
+			MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
+			MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+			MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
+			MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX53_PAD_CSI0_DAT8__I2C1_SDA		0xc0000000
+			MX53_PAD_CSI0_DAT9__I2C1_SCL		0xc0000000
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX53_PAD_KEY_ROW3__I2C2_SDA		0xc0000000
+			MX53_PAD_KEY_COL3__I2C2_SCL		0xc0000000
+		>;
+	};
+
+	pinctrl_ipu_csi0: ipucsi0grp {
+		fsl,pins = <
+			MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12    0x1c4
+			MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13    0x1c4
+			MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14    0x1c4
+			MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15    0x1c4
+			MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16    0x1c4
+			MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17    0x1c4
+			MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18    0x1c4
+			MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19    0x1c4
+			MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK 0x1e4
+			MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC   0x1e4
+			MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC    0x1e4
+			MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN 0x1e4
+		>;
+	};
+
+	pinctrl_ov5642: ov5642grp {
+		fsl,pins = <
+			MX53_PAD_NANDF_WP_B__GPIO6_9   0x1e4
+			MX53_PAD_NANDF_RB0__GPIO6_10   0x1e4
+			MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x1c4
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX53_PAD_CSI0_DAT10__UART1_TXD_MUX	0x1e4
+			MX53_PAD_CSI0_DAT11__UART1_RXD_MUX	0x1e4
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
+			MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
+			MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
+			MX53_PAD_PATA_DA_1__UART3_CTS		0x1e4
+			MX53_PAD_PATA_DA_2__UART3_RTS		0x1e4
+		>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+	};
+
+	magnetometer: mag3110@e {
+		compatible = "fsl,mag3110";
+		reg = <0x0e>;
+	};
+
+	touchkey: mpr121@5a {
+		compatible = "fsl,mpr121";
+		reg = <0x5a>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	accelerometer: mma8450@1c {
+		compatible = "fsl,mma8450";
+		reg = <0x1c>;
+	};
+
+	camera: ov5642@3c {
+		compatible = "ovti,ov5642";
+		reg = <0x3c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5642>;
+		assigned-clocks = <&clks IMX5_CLK_SSI_EXT1_SEL>,
+				  <&clks IMX5_CLK_SSI_EXT1_COM_SEL>;
+		assigned-clock-parents = <&clks IMX5_CLK_PLL2_SW>,
+					 <&clks IMX5_CLK_SSI_EXT1_PODF>;
+		assigned-clock-rates = <0>, <24000000>;
+		clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
+		clock-names = "xclk";
+		DVDD-supply = <&ldo9_reg>;
+		AVDD-supply = <&ldo7_reg>;
+		reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>;
+		powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;
+
+		port {
+			ov5642_to_ipu_csi0: endpoint {
+				remote-endpoint = <&ipu_csi0_from_parallel_sensor>;
+				bus-width = <8>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+			};
+		};
+	};
+
+	pmic: dialog@48 {
+		compatible = "dlg,da9053", "dlg,da9052";
+		reg = <0x48>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			ldo7_reg: ldo7 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+			};
+
+			ldo9_reg: ldo9 {
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <3650000>;
+			};
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&ipu_csi0_from_parallel_sensor {
+	remote-endpoint = <&ov5642_to_ipu_csi0>;
+	data-shift = <12>; /* Lines 19:12 used */
+	hsync-active = <1>;
+	vsync-active = <1>;
+};
+
+&ipu_csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu_csi0>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-tqma53.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-tqma53.dtsi
new file mode 100644
index 000000000000..0f0245df380f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-tqma53.dtsi
@@ -0,0 +1,272 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix
+ */
+
+#include "imx53.dtsi"
+
+/ {
+	model = "TQ TQMa53";
+	compatible = "tq,tqma53", "fsl,imx53";
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x40000000>; /* Up to 1GiB */
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&esdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc2>,
+		    <&pinctrl_esdhc2_cdwp>;
+	vmmc-supply = <&reg_3p3v>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "disabled";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio3 19 GPIO_ACTIVE_LOW>,
+		   <&gpio3 24 GPIO_ACTIVE_LOW>, <&gpio3 25 GPIO_ACTIVE_LOW>;
+	status = "disabled";
+};
+
+&esdhc3 { /* EMMC */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc3>;
+	vmmc-supply = <&reg_3p3v>;
+	non-removable;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			 MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000 /* SSI_MCLK */
+			 MX53_PAD_PATA_DA_1__GPIO7_7     0x80000000 /* LCD_BLT_EN */
+			 MX53_PAD_PATA_DA_2__GPIO7_8     0x80000000 /* LCD_RESET */
+			 MX53_PAD_PATA_DATA5__GPIO2_5    0x80000000 /* LCD_POWER */
+			 MX53_PAD_PATA_DATA6__GPIO2_6    0x80000000 /* PMIC_INT */
+			 MX53_PAD_PATA_DATA14__GPIO2_14  0x80000000 /* CSI_RST */
+			 MX53_PAD_PATA_DATA15__GPIO2_15  0x80000000 /* CSI_PWDN */
+			 MX53_PAD_GPIO_19__GPIO4_5 	 0x80000000 /* #SYSTEM_DOWN */
+			 MX53_PAD_GPIO_3__GPIO1_3        0x80000000
+			 MX53_PAD_PATA_DA_0__GPIO7_6	 0x80000000 /* #PHY_RESET */
+			 MX53_PAD_GPIO_1__PWM2_PWMO	 0x80000000 /* LCD_CONTRAST */
+		>;
+	};
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	0x80000000
+			MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
+			MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
+			MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
+		>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX53_PAD_KEY_COL2__CAN1_TXCAN		0x80000000
+			MX53_PAD_KEY_ROW2__CAN1_RXCAN		0x80000000
+		>;
+	};
+
+	pinctrl_can2: can2grp {
+		fsl,pins = <
+			MX53_PAD_KEY_COL4__CAN2_TXCAN		0x80000000
+			MX53_PAD_KEY_ROW4__CAN2_RXCAN		0x80000000
+		>;
+	};
+
+	pinctrl_cspi: cspigrp {
+		fsl,pins = <
+			MX53_PAD_SD1_DATA0__CSPI_MISO		0x1d5
+			MX53_PAD_SD1_CMD__CSPI_MOSI		0x1d5
+			MX53_PAD_SD1_CLK__CSPI_SCLK		0x1d5
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D16__ECSPI1_SCLK		0x80000000
+			MX53_PAD_EIM_D17__ECSPI1_MISO		0x80000000
+			MX53_PAD_EIM_D18__ECSPI1_MOSI		0x80000000
+		>;
+	};
+
+	pinctrl_esdhc2: esdhc2grp {
+		fsl,pins = <
+			MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
+			MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
+			MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
+			MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
+			MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
+			MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
+		>;
+	};
+
+	pinctrl_esdhc2_cdwp: esdhc2cdwpgrp {
+		fsl,pins = <
+			MX53_PAD_GPIO_4__GPIO1_4	0x80000000 /* SD2_CD */
+			MX53_PAD_GPIO_2__GPIO1_2	0x80000000 /* SD2_WP */
+		>;
+	};
+
+	pinctrl_esdhc3: esdhc3grp {
+		fsl,pins = <
+			MX53_PAD_PATA_DATA8__ESDHC3_DAT0	0x1d5
+			MX53_PAD_PATA_DATA9__ESDHC3_DAT1	0x1d5
+			MX53_PAD_PATA_DATA10__ESDHC3_DAT2	0x1d5
+			MX53_PAD_PATA_DATA11__ESDHC3_DAT3	0x1d5
+			MX53_PAD_PATA_DATA0__ESDHC3_DAT4	0x1d5
+			MX53_PAD_PATA_DATA1__ESDHC3_DAT5	0x1d5
+			MX53_PAD_PATA_DATA2__ESDHC3_DAT6	0x1d5
+			MX53_PAD_PATA_DATA3__ESDHC3_DAT7	0x1d5
+			MX53_PAD_PATA_RESET_B__ESDHC3_CMD	0x1d5
+			MX53_PAD_PATA_IORDY__ESDHC3_CLK		0x1d5
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
+			MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
+			MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
+			MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
+			MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
+			MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
+			MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
+			MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+			MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
+			MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX53_PAD_KEY_ROW3__I2C2_SDA		0xc0000000
+			MX53_PAD_KEY_COL3__I2C2_SCL		0xc0000000
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX53_PAD_GPIO_6__I2C3_SDA		0xc0000000
+			MX53_PAD_GPIO_5__I2C3_SCL		0xc0000000
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
+			MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
+			MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
+			MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
+		>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "disabled";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "disabled";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	status = "disabled";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "disabled";
+};
+
+&cspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cspi>;
+	cs-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>, <&gpio1 19 GPIO_ACTIVE_LOW>,
+		   <&gpio1 21 GPIO_ACTIVE_LOW>;
+	status = "disabled";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic: mc34708@8 {
+		compatible = "fsl,mc34708";
+		reg = <0x8>;
+		fsl,mc13xxx-uses-rtc;
+		interrupt-parent = <&gpio2>;
+		interrupts = <6 4>; /* PATA_DATA6, active high */
+	};
+
+	sensor1: temperature-sensor@48 {
+		compatible = "national,lm75b";
+		reg = <0x48>;
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c64";
+		pagesize = <32>;
+		reg = <0x50>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-tx53-x03x.dts b/arch/arm/boot/dts/nxp/imx/imx53-tx53-x03x.dts
new file mode 100644
index 000000000000..872cf7e16f20
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-tx53-x03x.dts
@@ -0,0 +1,313 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2013-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx53-tx53.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Ka-Ro electronics TX53 module (LCD)";
+	compatible = "karo,tx53", "fsl,imx53";
+
+	aliases {
+		display = &display;
+	};
+
+	display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rgb24_vga1>;
+		status = "okay";
+
+		port {
+			display0_in: endpoint {
+				remote-endpoint = <&ipu_di0_disp0>;
+			};
+		};
+
+		display-timings {
+			timing-vga {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <48>;
+				hsync-len = <96>;
+				hfront-porch = <16>;
+				vback-porch = <31>;
+				vsync-len = <2>;
+				vfront-porch = <12>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			timing-etc570 {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <114>;
+				hsync-len = <30>;
+				hfront-porch = <16>;
+				vback-porch = <32>;
+				vsync-len = <3>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			timing-et0350 {
+				clock-frequency = <6413760>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <34>;
+				hsync-len = <34>;
+				hfront-porch = <20>;
+				vback-porch = <15>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			timing-et0430 {
+				clock-frequency = <9009000>;
+				hactive = <480>;
+				vactive = <272>;
+				hback-porch = <2>;
+				hsync-len = <41>;
+				hfront-porch = <2>;
+				vback-porch = <2>;
+				vsync-len = <10>;
+				vfront-porch = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			timing-et0500 {
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			timing-et0700 { /* same as ET0500 */
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			timing-etq570 {
+				clock-frequency = <6596040>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <38>;
+				hsync-len = <30>;
+				hfront-porch = <30>;
+				vback-porch = <16>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
+		power-supply = <&reg_3v3>;
+		brightness-levels = <
+			  0  1  2  3  4  5  6  7  8  9
+			 10 11 12 13 14 15 16 17 18 19
+			 20 21 22 23 24 25 26 27 28 29
+			 30 31 32 33 34 35 36 37 38 39
+			 40 41 42 43 44 45 46 47 48 49
+			 50 51 52 53 54 55 56 57 58 59
+			 60 61 62 63 64 65 66 67 68 69
+			 70 71 72 73 74 75 76 77 78 79
+			 80 81 82 83 84 85 86 87 88 89
+			 90 91 92 93 94 95 96 97 98 99
+			100
+		>;
+		default-brightness-level = <50>;
+	};
+
+	reg_lcd_pwr: regulator-lcd-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD POWER";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	reg_lcd_reset: regulator-lcd-reset {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD RESET";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_2v5>;
+		VDDIO-supply = <&reg_3v3>;
+		clocks = <&mclk>;
+	};
+
+	polytouch: edt-ft5x06@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_edt_ft5x06_1>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+		wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+		wakeup-source;
+	};
+
+	touchscreen: tsc2007@48 {
+		compatible = "ti,tsc2007";
+		reg = <0x48>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tsc2007>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+		gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+		ti,x-plate-ohms = <660>;
+		wakeup-source;
+	};
+};
+
+&iomuxc {
+	pinctrl_edt_ft5x06_1: edt-ft5x06-1-grp {
+		fsl,pins = <
+			MX53_PAD_NANDF_CS2__GPIO6_15 0x1f0 /* Interrupt */
+			MX53_PAD_EIM_A16__GPIO2_22   0x04 /* Reset */
+			MX53_PAD_EIM_A17__GPIO2_21   0x04 /* Wake */
+		>;
+	};
+
+	pinctrl_kpp: kppgrp {
+		fsl,pins = <
+			MX53_PAD_GPIO_9__KPP_COL_6 0x1f4
+			MX53_PAD_GPIO_4__KPP_COL_7 0x1f4
+			MX53_PAD_KEY_COL2__KPP_COL_2 0x1f4
+			MX53_PAD_KEY_COL3__KPP_COL_3 0x1f4
+			MX53_PAD_GPIO_2__KPP_ROW_6 0x1f4
+			MX53_PAD_GPIO_5__KPP_ROW_7 0x1f4
+			MX53_PAD_KEY_ROW2__KPP_ROW_2 0x1f4
+			MX53_PAD_KEY_ROW3__KPP_ROW_3 0x1f4
+		>;
+	};
+
+	pinctrl_rgb24_vga1: rgb24-vga1grp {
+		fsl,pins = <
+			MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK		0x5
+			MX53_PAD_DI0_PIN15__IPU_DI0_PIN15		0x5
+			MX53_PAD_DI0_PIN2__IPU_DI0_PIN2			0x5
+			MX53_PAD_DI0_PIN3__IPU_DI0_PIN3			0x5
+			MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0		0x5
+			MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1		0x5
+			MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2		0x5
+			MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3		0x5
+			MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4		0x5
+			MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5		0x5
+			MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6		0x5
+			MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7		0x5
+			MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8		0x5
+			MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9		0x5
+			MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10		0x5
+			MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11		0x5
+			MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12		0x5
+			MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13		0x5
+			MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14		0x5
+			MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15		0x5
+			MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16		0x5
+			MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17		0x5
+			MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18		0x5
+			MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19		0x5
+			MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20		0x5
+			MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21		0x5
+			MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22		0x5
+			MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23		0x5
+		>;
+	};
+
+	pinctrl_tsc2007: tsc2007grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D26__GPIO3_26 0x1f0 /* Interrupt */
+		>;
+	};
+};
+
+&ipu_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&kpp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kpp>;
+	/* sample keymap */
+	/* row/col 0,1 are mapped to KPP row/col 6,7 */
+	linux,keymap = <
+		MATRIX_KEY(6, 6, KEY_POWER)
+		MATRIX_KEY(6, 7, KEY_KP0)
+		MATRIX_KEY(6, 2, KEY_KP1)
+		MATRIX_KEY(6, 3, KEY_KP2)
+		MATRIX_KEY(7, 6, KEY_KP3)
+		MATRIX_KEY(7, 7, KEY_KP4)
+		MATRIX_KEY(7, 2, KEY_KP5)
+		MATRIX_KEY(7, 3, KEY_KP6)
+		MATRIX_KEY(2, 6, KEY_KP7)
+		MATRIX_KEY(2, 7, KEY_KP8)
+		MATRIX_KEY(2, 2, KEY_KP9)
+	>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-tx53-x13x.dts b/arch/arm/boot/dts/nxp/imx/imx53-tx53-x13x.dts
new file mode 100644
index 000000000000..96c37f4296e5
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-tx53-x13x.dts
@@ -0,0 +1,218 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2013-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx53-tx53.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Ka-Ro electronics TX53 module (LVDS)";
+	compatible = "karo,tx53", "fsl,imx53";
+
+	aliases {
+		display = &lvds0;
+		lvds0 = &lvds0;
+		lvds1 = &lvds1;
+	};
+
+	backlight0: backlight0 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 0>;
+		power-supply = <&reg_3v3>;
+		brightness-levels = <
+			  0  1  2  3  4  5  6  7  8  9
+			 10 11 12 13 14 15 16 17 18 19
+			 20 21 22 23 24 25 26 27 28 29
+			 30 31 32 33 34 35 36 37 38 39
+			 40 41 42 43 44 45 46 47 48 49
+			 50 51 52 53 54 55 56 57 58 59
+			 60 61 62 63 64 65 66 67 68 69
+			 70 71 72 73 74 75 76 77 78 79
+			 80 81 82 83 84 85 86 87 88 89
+			 90 91 92 93 94 95 96 97 98 99
+			100
+		>;
+		default-brightness-level = <50>;
+	};
+
+	backlight1: backlight1 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 500000 0>;
+		power-supply = <&reg_3v3>;
+		brightness-levels = <
+			  0  1  2  3  4  5  6  7  8  9
+			 10 11 12 13 14 15 16 17 18 19
+			 20 21 22 23 24 25 26 27 28 29
+			 30 31 32 33 34 35 36 37 38 39
+			 40 41 42 43 44 45 46 47 48 49
+			 50 51 52 53 54 55 56 57 58 59
+			 60 61 62 63 64 65 66 67 68 69
+			 70 71 72 73 74 75 76 77 78 79
+			 80 81 82 83 84 85 86 87 88 89
+			 90 91 92 93 94 95 96 97 98 99
+			100
+		>;
+		default-brightness-level = <50>;
+	};
+
+	reg_lcd_pwr0: regulator-lvds0-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "LVDS0 POWER";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	reg_lcd_pwr1: regulator-lvds1-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "LVDS1 POWER";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_2v5>;
+		VDDIO-supply = <&reg_3v3>;
+		clocks = <&mclk>;
+	};
+};
+
+&iomuxc {
+	pinctrl_lvds0: lvds0grp {
+		fsl,pins = <
+			MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000
+			MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000
+			MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000
+			MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000
+			MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000
+		>;
+	};
+
+	pinctrl_lvds1: lvds1grp {
+		fsl,pins = <
+			MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x80000000
+			MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x80000000
+			MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x80000000
+			MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x80000000
+			MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x80000000
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <MX53_PAD_GPIO_9__PWM1_PWMO 0x04>;
+	};
+
+	pinctrl_eeti1: eeti1grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D22__GPIO3_22 0x1f0 /* Interrupt */
+		>;
+	};
+
+	pinctrl_eeti2: eeti2grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D23__GPIO3_23 0x1f0 /* Interrupt */
+		>;
+	};
+};
+
+&ldb {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lvds0 &pinctrl_lvds1>;
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&lvds0_timing0>;
+
+			lvds0_timing0: timing-hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hsync-len = <60>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vsync-len = <10>;
+				vfront-porch = <7>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			lvds0_timing1: timing-nl12880bc20 {
+				clock-frequency = <71000000>;
+				hactive = <1280>;
+				vactive = <800>;
+				hback-porch = <50>;
+				hsync-len = <60>;
+				hfront-porch = <50>;
+				vback-porch = <5>;
+				vsync-len = <13>;
+				vfront-porch = <5>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+
+	lvds1: lvds-channel@1 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&lvds1_timing0>;
+
+			lvds1_timing0: timing-hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hsync-len = <60>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vsync-len = <10>;
+				vfront-porch = <7>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-tx53.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-tx53.dtsi
new file mode 100644
index 000000000000..88855d3b2031
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-tx53.dtsi
@@ -0,0 +1,546 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2012-2017 <LW@KARO-electronics.de>
+ * based on imx53-qsb.dts
+ *   Copyright 2011 Freescale Semiconductor, Inc.
+ *   Copyright 2011 Linaro Ltd.
+ */
+
+#include "imx53.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Ka-Ro electronics TX53 module";
+	compatible = "karo,tx53", "fsl,imx53";
+
+	/* Will be filled by the bootloader */
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0>;
+	};
+
+	aliases {
+		can0 = &can2; /* Make the can interface indices consistent with TX28/TX48 modules */
+		can1 = &can1;
+		ipu = &ipu;
+		reg-can-xcvr = &reg_can_xcvr;
+		usbh1 = &usbh1;
+		usbotg = &usbotg;
+	};
+
+	clocks {
+		ckih1 {
+			clock-frequency = <0>;
+		};
+	};
+
+	mclk: clock-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_key>;
+
+		key-power {
+			label = "Power Button";
+			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+			linux,code = <116>; /* KEY_POWER */
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_stk5led>;
+
+		led-user {
+			label = "Heartbeat";
+			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_2v5: regulator-2v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "2V5";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_can_xcvr: regulator-can-xcvr {
+		compatible = "regulator-fixed";
+		regulator-name = "CAN XCVR";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can_xcvr>;
+		gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_usbh1_vbus: regulator-usbh1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbh1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1_vbus>;
+		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usbotg_vbus: regulator-usbotg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbotg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg_vbus>;
+		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "karo,tx53-audio-sgtl5000", "fsl,imx-audio-sgtl5000";
+		model = "tx53-audio-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		/* '1' based port numbers according to datasheet names */
+		mux-int-port = <1>;
+		mux-ext-port = <5>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ssi1>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	cs-gpios = <
+		&gpio2 30 GPIO_ACTIVE_HIGH
+		&gpio3 19 GPIO_ACTIVE_HIGH
+	>;
+
+};
+
+&esdhc1 {
+	cd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+	fsl,wp-controller;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	status = "okay";
+};
+
+&esdhc2 {
+	cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+	fsl,wp-controller;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc2>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
+	phy-handle = <&phy0>;
+	mac-address = [000000000000]; /* placeholder; will be overwritten by bootloader */
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+			interrupt-parent = <&gpio2>;
+			interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+			device_type = "ethernet-phy";
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-0 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	rtc1: rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ds1339>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
+		trickle-resistor-ohms = <250>;
+		trickle-diode-disable;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		/* pins not in use by any device on the Starterkit board series */
+		fsl,pins = <
+			/* CMOS Sensor Interface */
+			MX53_PAD_CSI0_DAT12__GPIO5_30 0x1f4
+			MX53_PAD_CSI0_DAT13__GPIO5_31 0x1f4
+			MX53_PAD_CSI0_DAT14__GPIO6_0 0x1f4
+			MX53_PAD_CSI0_DAT15__GPIO6_1 0x1f4
+			MX53_PAD_CSI0_DAT16__GPIO6_2 0x1f4
+			MX53_PAD_CSI0_DAT17__GPIO6_3 0x1f4
+			MX53_PAD_CSI0_DAT18__GPIO6_4 0x1f4
+			MX53_PAD_CSI0_DAT19__GPIO6_5 0x1f4
+			MX53_PAD_CSI0_MCLK__GPIO5_19 0x1f4
+			MX53_PAD_CSI0_VSYNC__GPIO5_21 0x1f4
+			MX53_PAD_CSI0_PIXCLK__GPIO5_18 0x1f4
+			MX53_PAD_GPIO_0__GPIO1_0 0x1f4
+			/* Module Specific Signal */
+			/* MX53_PAD_NANDF_CS2__GPIO6_15 0x1f4 maybe used by EDT-FT5x06 */
+			/* MX53_PAD_EIM_A16__GPIO2_22 0x1f4 maybe used by EDT-FT5x06 */
+			MX53_PAD_EIM_D29__GPIO3_29 0x1f4
+			MX53_PAD_EIM_EB3__GPIO2_31 0x1f4
+			/* MX53_PAD_EIM_A17__GPIO2_21 0x1f4 maybe used by EDT-FT5x06 */
+			/* MX53_PAD_EIM_A18__GPIO2_20 0x1f4 used by LED */
+			MX53_PAD_EIM_A19__GPIO2_19 0x1f4
+			MX53_PAD_EIM_A20__GPIO2_18 0x1f4
+			MX53_PAD_EIM_A21__GPIO2_17 0x1f4
+			MX53_PAD_EIM_A22__GPIO2_16 0x1f4
+			MX53_PAD_EIM_A23__GPIO6_6 0x1f4
+			MX53_PAD_EIM_A24__GPIO5_4 0x1f4
+			MX53_PAD_CSI0_DAT8__GPIO5_26 0x1f4
+			MX53_PAD_CSI0_DAT9__GPIO5_27 0x1f4
+			MX53_PAD_CSI0_DAT10__GPIO5_28 0x1f4
+			MX53_PAD_CSI0_DAT11__GPIO5_29 0x1f4
+			/* MX53_PAD_EIM_D22__GPIO3_22 0x1f4 maybe used by EETI touchpanel driver */
+			/* MX53_PAD_EIM_D23__GPIO3_23 0x1f4 maybe used by EETI touchpanel driver */
+			MX53_PAD_GPIO_13__GPIO4_3 0x1f4
+			MX53_PAD_EIM_CS0__GPIO2_23 0x1f4
+			MX53_PAD_EIM_CS1__GPIO2_24 0x1f4
+			MX53_PAD_CSI0_DATA_EN__GPIO5_20 0x1f4
+			MX53_PAD_EIM_WAIT__GPIO5_0 0x1f4
+			MX53_PAD_EIM_EB0__GPIO2_28 0x1f4
+			MX53_PAD_EIM_EB1__GPIO2_29 0x1f4
+			MX53_PAD_EIM_OE__GPIO2_25 0x1f4
+			MX53_PAD_EIM_LBA__GPIO2_27 0x1f4
+			MX53_PAD_EIM_RW__GPIO2_26 0x1f4
+			MX53_PAD_EIM_DA8__GPIO3_8 0x1f4
+			MX53_PAD_EIM_DA9__GPIO3_9 0x1f4
+			MX53_PAD_EIM_DA10__GPIO3_10 0x1f4
+			MX53_PAD_EIM_DA11__GPIO3_11 0x1f4
+			MX53_PAD_EIM_DA12__GPIO3_12 0x1f4
+			MX53_PAD_EIM_DA13__GPIO3_13 0x1f4
+			MX53_PAD_EIM_DA14__GPIO3_14 0x1f4
+			MX53_PAD_EIM_DA15__GPIO3_15 0x1f4
+			>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX53_PAD_GPIO_7__CAN1_TXCAN		0x80000000
+			MX53_PAD_GPIO_8__CAN1_RXCAN		0x80000000
+		>;
+	};
+
+	pinctrl_can2: can2grp {
+		fsl,pins = <
+			MX53_PAD_KEY_COL4__CAN2_TXCAN		0x80000000
+			MX53_PAD_KEY_ROW4__CAN2_RXCAN		0x80000000
+		>;
+	};
+
+	pinctrl_can_xcvr: can-xcvrgrp {
+		fsl,pins = <MX53_PAD_DISP0_DAT0__GPIO4_21 0xe0>; /* Flexcan XCVR enable */
+	};
+
+	pinctrl_ds1339: ds1339grp {
+		fsl,pins = <MX53_PAD_DI0_PIN4__GPIO4_20 0xe0>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX53_PAD_GPIO_19__ECSPI1_RDY		0x80000000
+			MX53_PAD_EIM_EB2__ECSPI1_SS0		0x80000000
+			MX53_PAD_EIM_D16__ECSPI1_SCLK		0x80000000
+			MX53_PAD_EIM_D17__ECSPI1_MISO		0x80000000
+			MX53_PAD_EIM_D18__ECSPI1_MOSI		0x80000000
+			MX53_PAD_EIM_D19__ECSPI1_SS1		0x80000000
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+			MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+			MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+			MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+			MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+			MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+			MX53_PAD_EIM_D24__GPIO3_24 0x1f0
+		>;
+	};
+
+	pinctrl_esdhc2: esdhc2grp {
+		fsl,pins = <
+			MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
+			MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
+			MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
+			MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
+			MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
+			MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
+			MX53_PAD_EIM_D25__GPIO3_25 0x1f0
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
+			MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
+			MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
+			MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
+			MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
+			MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
+			MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
+			MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+			MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
+			MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
+		>;
+	};
+
+	pinctrl_gpio_key: gpio-keygrp {
+		fsl,pins = <MX53_PAD_EIM_A25__GPIO5_2 0x1f4>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D21__I2C1_SCL		0x400001e4
+			MX53_PAD_EIM_D28__I2C1_SDA		0x400001e4
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpiogrp {
+		fsl,pins = <
+			MX53_PAD_EIM_D21__GPIO3_21		0x400001e6
+			MX53_PAD_EIM_D28__GPIO3_28		0x400001e6
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX53_PAD_GPIO_3__I2C3_SCL		0x400001e4
+			MX53_PAD_GPIO_6__I2C3_SDA		0x400001e4
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3-gpiogrp {
+		fsl,pins = <
+			MX53_PAD_GPIO_3__GPIO1_3		0x400001e6
+			MX53_PAD_GPIO_6__GPIO1_6		0x400001e6
+		>;
+	};
+
+	pinctrl_nand: nandgrp {
+		fsl,pins = <
+			MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B	0x4
+			MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B	0x4
+			MX53_PAD_NANDF_CLE__EMI_NANDF_CLE	0x4
+			MX53_PAD_NANDF_ALE__EMI_NANDF_ALE	0x4
+			MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B	0xe0
+			MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0	0xe0
+			MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0	0x4
+			MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0	0xa4
+			MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1	0xa4
+			MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2	0xa4
+			MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3	0xa4
+			MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4	0xa4
+			MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5	0xa4
+			MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6	0xa4
+			MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7	0xa4
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX53_PAD_GPIO_1__PWM2_PWMO		0x80000000
+		>;
+	};
+
+	pinctrl_ssi1: ssi1grp {
+		fsl,pins = <
+			MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	0x80000000
+			MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
+			MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
+			MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
+		>;
+	};
+
+	pinctrl_ssi2: ssi2grp {
+		fsl,pins = <
+			MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC	0x80000000
+			MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD	0x80000000
+			MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS	0x80000000
+			MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD	0x80000000
+			MX53_PAD_EIM_D27__GPIO3_27 0x1f0
+		>;
+	};
+
+	pinctrl_stk5led: stk5ledgrp {
+		fsl,pins = <MX53_PAD_EIM_A18__GPIO2_20 0xc0>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
+			MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
+			MX53_PAD_PATA_RESET_B__UART1_CTS	0x1c5
+			MX53_PAD_PATA_IORDY__UART1_RTS		0x1c5
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1c5
+			MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1c5
+			MX53_PAD_PATA_DIOR__UART2_RTS		0x1c5
+			MX53_PAD_PATA_INTRQ__UART2_CTS		0x1c5
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
+			MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
+			MX53_PAD_PATA_DA_1__UART3_CTS		0x1e4
+			MX53_PAD_PATA_DA_2__UART3_RTS		0x1e4
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D30__GPIO3_30 0x100 /* OC */
+		>;
+	};
+
+	pinctrl_usbh1_vbus: usbh1-vbusgrp {
+		fsl,pins = <
+			MX53_PAD_EIM_D31__GPIO3_31 0xe0 /* VBUS ENABLE */
+		>;
+	};
+
+	pinctrl_usbotg_vbus: usbotg-vbusgrp {
+		fsl,pins = <
+			MX53_PAD_GPIO_7__GPIO1_7 0xe0 /* VBUS ENABLE */
+			MX53_PAD_GPIO_8__GPIO1_8 0x100 /* OC */
+		>;
+	};
+};
+
+&ipu {
+	status = "okay";
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nand>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+};
+
+&sdma {
+	fsl,sdma-ram-script-name = "sdma-imx53.bin";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&ssi2 {
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	phy_type = "utmi";
+	disable-over-current;
+	vbus-supply = <&reg_usbh1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	phy_type = "utmi";
+	dr_mode = "peripheral";
+	disable-over-current;
+	vbus-supply = <&reg_usbotg_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-usbarmory.dts b/arch/arm/boot/dts/nxp/imx/imx53-usbarmory.dts
new file mode 100644
index 000000000000..3ad9db4b1442
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-usbarmory.dts
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * USB armory MkI device tree file
+ * https://inversepath.com/usbarmory
+ *
+ * Copyright (C) 2015, Inverse Path
+ * Andrej Rosano <andrej@inversepath.com>
+ */
+
+/dts-v1/;
+#include "imx53.dtsi"
+
+/ {
+	model = "Inverse Path USB armory";
+	compatible = "inversepath,imx53-usbarmory", "fsl,imx53";
+};
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		led-user {
+			label = "LED";
+			gpios = <&gpio4 27 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+/*
+ * Not every i.MX53 P/N supports clock > 800MHz.
+ * As USB armory does not mount a specific P/N set a safe clock upper limit.
+ */
+&cpu0 {
+	operating-points = <
+		/* kHz */
+		166666  850000
+		400000  900000
+		800000 1050000
+	>;
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+			MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+			MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+			MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+			MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+			MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+		>;
+	};
+
+	pinctrl_i2c1_pmic: i2c1grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D21__I2C1_SCL	0x80
+			MX53_PAD_EIM_D28__I2C1_SDA	0x80
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX53_PAD_DISP0_DAT6__GPIO4_27 0x1e4
+		>;
+	};
+
+	/*
+	 * UART mode pin header configuration
+	 * 3 - GPIO5[26], pull-down 100K
+	 * 4 - GPIO5[27], pull-down 100K
+	 * 5 - TX, pull-up 100K
+	 * 6 - RX, pull-up 100K
+	 * 7 - GPIO5[30], pull-down 100K
+	 */
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX53_PAD_CSI0_DAT8__GPIO5_26		0xc0
+			MX53_PAD_CSI0_DAT9__GPIO5_27		0xc0
+			MX53_PAD_CSI0_DAT10__UART1_TXD_MUX	0x1e4
+			MX53_PAD_CSI0_DAT11__UART1_RXD_MUX	0x1e4
+			MX53_PAD_CSI0_DAT12__GPIO5_30		0xc0
+		>;
+	};
+};
+
+&i2c1 {
+	pinctrl-0 = <&pinctrl_i2c1_pmic>;
+	status = "okay";
+
+	ltc3589: pmic@34 {
+		compatible = "lltc,ltc3589-2";
+		reg = <0x34>;
+
+		regulators {
+			sw1_reg: sw1 {
+				regulator-min-microvolt = <591930>;
+				regulator-max-microvolt = <1224671>;
+				lltc,fb-voltage-divider = <100000 158000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <704123>;
+				regulator-max-microvolt = <1456803>;
+				lltc,fb-voltage-divider = <180000 191000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <1341250>;
+				regulator-max-microvolt = <2775000>;
+				lltc,fb-voltage-divider = <270000 100000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bb_out_reg: bb-out {
+				regulator-min-microvolt = <3387341>;
+				regulator-max-microvolt = <3387341>;
+				lltc,fb-voltage-divider = <511000 158000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: ldo1 {
+				regulator-min-microvolt = <1306329>;
+				regulator-max-microvolt = <1306329>;
+				lltc,fb-voltage-divider = <100000 158000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-min-microvolt = <704123>;
+				regulator-max-microvolt = <1456806>;
+				lltc,fb-voltage-divider = <180000 191000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: ldo3 {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-boot-on;
+			};
+
+			ldo4_reg: ldo4 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3200000>;
+			};
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-voipac-bsb.dts b/arch/arm/boot/dts/nxp/imx/imx53-voipac-bsb.dts
new file mode 100644
index 000000000000..ae9cc04f23eb
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-voipac-bsb.dts
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Rostislav Lisovy <lisovy@gmail.com>, PiKRON s.r.o.
+ */
+
+/dts-v1/;
+#include "imx53-voipac-dmm-668.dtsi"
+
+/ {
+	sound {
+		compatible = "fsl,imx53-voipac-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx53-voipac-sgtl5000";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <2>;
+		mux-ext-port = <5>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_gpio>;
+
+		led1 {
+			label = "led-red";
+			gpios = <&gpio3 29 0>;
+			default-state = "off";
+		};
+
+		led2 {
+			label = "led-orange";
+			gpios = <&gpio2 31 0>;
+			default-state = "off";
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hogbsb>;
+
+	pinctrl_hogbsb: hogbsbgrp {
+		fsl,pins = <
+			/* SD2_CD */
+			MX53_PAD_EIM_D25__GPIO3_25	0x80000000
+			/* SD2_WP */
+			MX53_PAD_EIM_A19__GPIO2_19 	0x80000000
+		>;
+	};
+
+	led_pin_gpio: ledgpiogrp {
+		fsl,pins = <
+			MX53_PAD_EIM_D29__GPIO3_29	0x80000000
+			MX53_PAD_EIM_EB3__GPIO2_31	0x80000000
+		>;
+	};
+
+	/* Keyboard controller */
+	pinctrl_kpp_1: kpp1grp {
+		fsl,pins = <
+			MX53_PAD_GPIO_9__KPP_COL_6	0xe8
+			MX53_PAD_GPIO_4__KPP_COL_7	0xe8
+			MX53_PAD_KEY_COL2__KPP_COL_2	0xe8
+			MX53_PAD_KEY_COL3__KPP_COL_3	0xe8
+			MX53_PAD_KEY_COL4__KPP_COL_4	0xe8
+			MX53_PAD_GPIO_2__KPP_ROW_6	0xe0
+			MX53_PAD_GPIO_5__KPP_ROW_7	0xe0
+			MX53_PAD_KEY_ROW2__KPP_ROW_2	0xe0
+			MX53_PAD_KEY_ROW3__KPP_ROW_3	0xe0
+			MX53_PAD_KEY_ROW4__KPP_ROW_4	0xe0
+		>;
+	};
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	0x80000000
+			MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
+			MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
+			MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
+		>;
+	};
+
+	pinctrl_esdhc2: esdhc2grp {
+		fsl,pins = <
+			MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
+			MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
+			MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
+			MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
+			MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
+			MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX53_PAD_GPIO_3__I2C3_SCL		0xc0000000
+			MX53_PAD_GPIO_6__I2C3_SDA		0xc0000000
+		>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>; /* SSI1 */
+	status = "okay";
+};
+
+&esdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc2>;
+	cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+		clocks = <&clks 150>;
+	};
+};
+
+&kpp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kpp_1>;
+	linux,keymap = <
+			0x0203003b	/* KEY_F1 */
+			0x0603003c	/* KEY_F2 */
+			0x0207003d	/* KEY_F3 */
+			0x0607003e	/* KEY_F4 */
+			>;
+	keypad,num-rows = <8>;
+	keypad,num-columns = <1>;
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-voipac-dmm-668.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-voipac-dmm-668.dtsi
new file mode 100644
index 000000000000..6dc70a92d831
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-voipac-dmm-668.dtsi
@@ -0,0 +1,257 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Rostislav Lisovy <lisovy@gmail.com>, PiKRON s.r.o.
+ */
+
+#include "imx53.dtsi"
+
+/ {
+	model = "Voipac i.MX53 X53-DMM-668";
+	compatible = "voipac,imx53-dmm-668", "fsl,imx53";
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x20000000>,
+		      <0xb0000000 0x20000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_vbus: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 31 0>; /* PEN */
+		enable-active-high;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* Make DA9053 regulator functional */
+			MX53_PAD_GPIO_16__GPIO7_11	0x80000000
+			/* FEC Power enable */
+			MX53_PAD_GPIO_11__GPIO4_1	0x80000000
+			/* FEC RST */
+			MX53_PAD_GPIO_12__GPIO4_2	0x80000000
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D16__ECSPI1_SCLK		0x80000000
+			MX53_PAD_EIM_D17__ECSPI1_MISO		0x80000000
+			MX53_PAD_EIM_D18__ECSPI1_MOSI		0x80000000
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
+			MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
+			MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
+			MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
+			MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
+			MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
+			MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
+			MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+			MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
+			MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D21__I2C1_SCL		0xc0000000
+			MX53_PAD_EIM_D28__I2C1_SDA		0xc0000000
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
+			MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
+		>;
+	};
+
+	pinctrl_nand: nandgrp {
+		fsl,pins = <
+			MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B	0x4
+			MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B	0x4
+			MX53_PAD_NANDF_CLE__EMI_NANDF_CLE	0x4
+			MX53_PAD_NANDF_ALE__EMI_NANDF_ALE	0x4
+			MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B	0xe0
+			MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0	0xe0
+			MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0	0x4
+			MX53_PAD_PATA_DATA0__EMI_NANDF_D_0	0xa4
+			MX53_PAD_PATA_DATA1__EMI_NANDF_D_1	0xa4
+			MX53_PAD_PATA_DATA2__EMI_NANDF_D_2	0xa4
+			MX53_PAD_PATA_DATA3__EMI_NANDF_D_3	0xa4
+			MX53_PAD_PATA_DATA4__EMI_NANDF_D_4	0xa4
+			MX53_PAD_PATA_DATA5__EMI_NANDF_D_5	0xa4
+			MX53_PAD_PATA_DATA6__EMI_NANDF_D_6	0xa4
+			MX53_PAD_PATA_DATA7__EMI_NANDF_D_7	0xa4
+		>;
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio3 19 GPIO_ACTIVE_LOW>,
+		   <&gpio2 16 GPIO_ACTIVE_LOW>, <&gpio2 17 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: dialog@48 {
+		compatible = "dlg,da9053-aa", "dlg,da9052";
+		reg = <0x48>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>; /* low-level active IRQ at GPIO7_11 */
+
+		regulators {
+			buck1_reg: buck1 {
+				regulator-name = "BUCKCORE";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+			};
+
+			buck2_reg: buck2 {
+				regulator-name = "BUCKPRO";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			buck3_reg: buck3 {
+				regulator-name = "BUCKMEM";
+				regulator-min-microvolt = <1420000>;
+				regulator-max-microvolt = <1580000>;
+				regulator-always-on;
+			};
+
+			buck4_reg: buck4 {
+				regulator-name = "BUCKPERI";
+				regulator-min-microvolt = <2370000>;
+				regulator-max-microvolt = <2630000>;
+				regulator-always-on;
+			};
+
+			ldo1_reg: ldo1 {
+				regulator-name = "ldo1_1v3";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-name = "ldo2_1v3";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: ldo3 {
+				regulator-name = "ldo3_3v3";
+				regulator-min-microvolt = <3250000>;
+				regulator-max-microvolt = <3350000>;
+				regulator-always-on;
+			};
+
+			ldo4_reg: ldo4 {
+				regulator-name = "ldo4_2v775";
+				regulator-min-microvolt = <2770000>;
+				regulator-max-microvolt = <2780000>;
+				regulator-always-on;
+			};
+
+			ldo5_reg: ldo5 {
+				regulator-name = "ldo5_3v3";
+				regulator-min-microvolt = <3250000>;
+				regulator-max-microvolt = <3350000>;
+				regulator-always-on;
+			};
+
+			ldo6_reg: ldo6 {
+				regulator-name = "ldo6_1v3";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			ldo7_reg: ldo7 {
+				regulator-name = "ldo7_2v75";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+
+			ldo8_reg: ldo8 {
+				regulator-name = "ldo8_1v8";
+				regulator-min-microvolt = <1750000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-always-on;
+			};
+
+			ldo9_reg: ldo9 {
+				regulator-name = "ldo9_1v5";
+				regulator-min-microvolt = <1450000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			ldo10_reg: ldo10 {
+				regulator-name = "ldo10_1v3";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nand>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_vbus>;
+	phy_type = "utmi";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/nxp/imx/imx53.dtsi
index 2cf3909cca2f..93225a56896f 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx53.dtsi
@@ -86,25 +86,25 @@
 
 	clocks {
 		ckil {
-			compatible = "fsl,imx-ckil", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
 
 		ckih1 {
-			compatible = "fsl,imx-ckih1", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <22579200>;
 		};
 
 		ckih2 {
-			compatible = "fsl,imx-ckih2", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <0>;
 		};
 
 		osc {
-			compatible = "fsl,imx-osc", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <24000000>;
 		};
@@ -132,7 +132,7 @@
 		status = "okay";
 	};
 
-	soc {
+	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
@@ -222,14 +222,14 @@
 			clock-names = "core_clk", "mem_iface_clk";
 		};
 
-		bus@50000000 { /* AIPS1 */
+		aips1: bus@50000000 { /* AIPS1 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0x50000000 0x10000000>;
 			ranges;
 
-			spba@50000000 {
+			spba-bus@50000000 {
 				compatible = "fsl,spba-bus", "simple-bus";
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -275,7 +275,7 @@
 				ecspi1: spi@50010000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
-					compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
+					compatible = "fsl,imx53-ecspi";
 					reg = <0x50010000 0x4000>;
 					interrupts = <36>;
 					clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
@@ -458,7 +458,7 @@
 				clocks = <&clks IMX5_CLK_SRTC_GATE>;
 			};
 
-			iomuxc: iomuxc@53fa8000 {
+			iomuxc: pinctrl@53fa8000 {
 				compatible = "fsl,imx53-iomuxc";
 				reg = <0x53fa8000 0x4000>;
 			};
@@ -595,10 +595,10 @@
 				#reset-cells = <1>;
 			};
 
-			clks: ccm@53fd4000{
+			clks: ccm@53fd4000 {
 				compatible = "fsl,imx53-ccm";
 				reg = <0x53fd4000 0x4000>;
-				interrupts = <0 71 0x04 0 72 0x04>;
+				interrupts = <71>, <72>;
 				#clock-cells = <1>;
 			};
 
@@ -655,7 +655,7 @@
 			};
 		};
 
-		bus@60000000 {	/* AIPS2 */
+		aips2: bus@60000000 {	/* AIPS2 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -668,7 +668,7 @@
 			};
 
 			iim: efuse@63f98000 {
-				compatible = "fsl,imx53-iim", "fsl,imx27-iim", "syscon";
+				compatible = "fsl,imx53-iim";
 				reg = <0x63f98000 0x4000>;
 				interrupts = <69>;
 				clocks = <&clks IMX5_CLK_IIM_GATE>;
@@ -701,7 +701,7 @@
 			ecspi2: spi@63fac000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
+				compatible = "fsl,imx53-ecspi";
 				reg = <0x63fac000 0x4000>;
 				interrupts = <37>;
 				clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
@@ -710,7 +710,7 @@
 				status = "disabled";
 			};
 
-			sdma: sdma@63fb0000 {
+			sdma: dma-controller@63fb0000 {
 				compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
 				reg = <0x63fb0000 0x4000>;
 				interrupts = <6>;
@@ -775,7 +775,7 @@
 				status = "disabled";
 			};
 
-			nfc: nand@63fdb000 {
+			nfc: nand-controller@63fdb000 {
 				compatible = "fsl,imx53-nand";
 				reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>;
 				interrupts = <8>;
@@ -850,6 +850,9 @@
 		ocram: sram@f8000000 {
 			compatible = "mmio-sram";
 			reg = <0xf8000000 0x20000>;
+			ranges = <0 0xf8000000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX5_CLK_OCRAM>;
 		};
 	};
diff --git a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi b/arch/arm/boot/dts/nxp/imx/imx6-logicpd-baseboard.dtsi
index d9de9b4f0c52..1e0a588b2a15 100644
--- a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6-logicpd-baseboard.dtsi
@@ -6,7 +6,7 @@
 	keyboard {
 		compatible = "gpio-keys";
 
-		btn0 {
+		button-0 {
 			gpios = <&pcf8575 0 GPIO_ACTIVE_LOW>;
 			label = "btn0";
 			linux,code = <KEY_WAKEUP>;
@@ -14,7 +14,7 @@
 			wakeup-source;
 		};
 
-		btn1 {
+		button-1 {
 			gpios = <&pcf8575 1 GPIO_ACTIVE_LOW>;
 			label = "btn1";
 			linux,code = <KEY_WAKEUP>;
@@ -22,7 +22,7 @@
 			wakeup-source;
 		};
 
-		btn2 {
+		button-2 {
 			gpios = <&pcf8575 2 GPIO_ACTIVE_LOW>;
 			label = "btn2";
 			linux,code = <KEY_WAKEUP>;
@@ -30,7 +30,7 @@
 			wakeup-source;
 		};
 
-		btn3 {
+		button-3 {
 			gpios = <&pcf8575 3 GPIO_ACTIVE_LOW>;
 			label = "btn3";
 			linux,code = <KEY_WAKEUP>;
@@ -534,7 +534,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_100mhz: h100-usdhc2-100mhz {
+	pinctrl_usdhc2_100mhz: h100-usdhc2-100mhzgrp {
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0	/* CD */
 			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170b9
@@ -546,7 +546,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_200mhz: h100-usdhc2-200mhz {
+	pinctrl_usdhc2_200mhz: h100-usdhc2-200mhzgrp {
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0	/* CD */
 			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170f9
diff --git a/arch/arm/boot/dts/imx6-logicpd-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6-logicpd-som.dtsi
index 547fb141ec0c..547fb141ec0c 100644
--- a/arch/arm/boot/dts/imx6-logicpd-som.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6-logicpd-som.dtsi
diff --git a/arch/arm/boot/dts/imx6dl-alti6p.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-alti6p.dts
index 4329b372d8cb..9bb36db131c2 100644
--- a/arch/arm/boot/dts/imx6dl-alti6p.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-alti6p.dts
@@ -22,9 +22,10 @@
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
 	};
 
-	i2c2-mux {
+	i2c-mux-2 {
 		compatible = "i2c-mux";
 		i2c-parent = <&i2c2>;
 		mux-controls = <&i2c_mux>;
@@ -44,7 +45,7 @@
 		};
 	};
 
-	i2c4-mux {
+	i2c-mux-4 {
 		compatible = "i2c-mux";
 		i2c-parent = <&i2c4>;
 		mux-controls = <&i2c_mux>;
@@ -191,8 +192,15 @@
 	status = "okay";
 };
 
+&clks {
+	clocks = <&clock_ksz8081>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clock_ksz8081>;
+};
+
 &ecspi1 {
-	cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
@@ -208,10 +216,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rmii";
-	clocks = <&clks IMX6QDL_CLK_ENET>,
-		 <&clks IMX6QDL_CLK_ENET>,
-		 <&clock_ksz8081>;
-	clock-names = "ipg", "ahb", "ptp";
 	status = "okay";
 
 	mdio {
@@ -357,6 +361,7 @@
 	pinctrl-0 = <&pinctrl_usbh1>;
 	phy_type = "utmi";
 	dr_mode = "host";
+	over-current-active-low;
 	status = "okay";
 };
 
@@ -366,9 +371,18 @@
 	pinctrl-0 = <&pinctrl_usbotg>;
 	phy_type = "utmi";
 	dr_mode = "host";
+	over-current-active-low;
 	status = "okay";
 };
 
+&usbphynop1 {
+	status = "disabled";
+};
+
+&usbphynop2 {
+	status = "disabled";
+};
+
 &usdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
diff --git a/arch/arm/boot/dts/imx6dl-apf6dev.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-apf6dev.dts
index 3dcce3454b08..3dcce3454b08 100644
--- a/arch/arm/boot/dts/imx6dl-apf6dev.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-apf6dev.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_4.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_4.dts
new file mode 100644
index 000000000000..fc62ba2a4fcb
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_4.dts
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * support for the imx6 based aristainetos2 board
+ *
+ * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
+ */
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-aristainetos2.dtsi"
+
+/ {
+	model = "aristainetos2 i.MX6 Dual Lite Board 4";
+	compatible = "abb,aristainetos2-imx6dl-4", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	display0: disp0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp>;
+
+		port@0 {
+			reg = <0>;
+			display0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			display_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&ecspi1 {
+	lcd_panel: display@0 {
+		compatible = "lg,lg4573";
+		spi-max-frequency = <10000000>;
+		reg = <0>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing-480x800p57 {
+				clock-frequency = <27000027>;
+				hactive = <480>;
+				vactive = <800>;
+				hfront-porch = <10>;
+				hback-porch = <59>;
+				hsync-len = <10>;
+				vback-porch = <15>;
+				vfront-porch = <15>;
+				vsync-len = <15>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+			};
+		};
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	touch: touch@4b {
+		compatible = "atmel,maxtouch";
+		reg = <0x4b>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <9 8>;
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&iomuxc {
+	pinctrl_ipu_disp: ipudisp1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x31
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0xE1
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0xE1
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0xE1
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0xE1
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0xE1
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0xE1
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0xE1
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0xE1
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0xE1
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0xE1
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0xE1
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0xE1
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0xE1
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0xE1
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0xE1
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0xe1
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0xE1
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0xE1
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0xE1
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0xE1
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0xE1
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0xE1
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0xE1
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0xE1
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0xE1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_7.dts
new file mode 100644
index 000000000000..bf8e07f97143
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_7.dts
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * support for the imx6 based aristainetos2 board
+ *
+ * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
+ */
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-aristainetos2.dtsi"
+
+/ {
+	model = "aristainetos2 i.MX6 Dual Lite Board 7";
+	compatible = "abb,aristainetos2-imx6dl-7", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	panel: panel {
+		compatible = "lg,lb070wv8";
+		backlight = <&backlight>;
+		power-supply = <&reg_3p3v>;
+		enable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	touch: touch@4d {
+		compatible = "atmel,maxtouch";
+		reg = <0x4d>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <9 8>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+			lvds0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_lvds0>;
+			};
+		};
+
+		port@4 {
+			reg = <4>;
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_4.dts
index cc861a43eb58..9ec038f1d0ff 100644
--- a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_4.dts
@@ -14,7 +14,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		enable-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
@@ -36,8 +36,8 @@
 		status = "okay";
 
 		display-timings {
-			480x800p60 {
-				native-mode;
+			native-mode = <&timing0>;
+			timing0: timing-480x800p60 {
 				clock-frequency = <30000000>;
 				hactive = <480>;
 				vactive = <800>;
@@ -79,6 +79,5 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_7.dts
index b6cb78870cd5..b3129832f471 100644
--- a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_7.dts
@@ -25,8 +25,8 @@
 		status = "okay";
 
 		display-timings {
-			800x480p60 {
-				native-mode;
+			native-mode = <&timing0>;
+			timing0: timing-800x480p60 {
 				clock-frequency = <33246000>;
 				hactive = <800>;
 				vactive = <480>;
@@ -49,7 +49,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 3000>;
+		pwms = <&pwm3 0 3000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 		pinctrl-names = "default";
@@ -69,6 +69,5 @@
 };
 
 &pwm3 {
-	#pwm-cells = <2>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6dl-b105pv2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-b105pv2.dts
index 411aa72d344b..63cdf24eb397 100644
--- a/arch/arm/boot/dts/imx6dl-b105pv2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b105pv2.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0 or MIT
+// SPDX-License-Identifier: GPL-2.0 OR MIT
 //
 // Device Tree Source for General Electric B105Pv2
 //
@@ -22,7 +22,7 @@
 		compatible = "ilitek,ili251x";
 		reg = <0x41>;
 		pinctrl-names = "default";
-		pinctrl-0 =<&pinctrl_q7_gpio0>;
+		pinctrl-0 = <&pinctrl_q7_gpio0>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
 		reset-gpios = <&tca6424a 21 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/imx6dl-b105v2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-b105v2.dts
index d011127c635b..2e75d700efdb 100644
--- a/arch/arm/boot/dts/imx6dl-b105v2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b105v2.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0 or MIT
+// SPDX-License-Identifier: GPL-2.0 OR MIT
 //
 // Device Tree Source for General Electric B105v2
 //
@@ -22,7 +22,7 @@
 		compatible = "ilitek,ili251x";
 		reg = <0x41>;
 		pinctrl-names = "default";
-		pinctrl-0 =<&pinctrl_q7_gpio0>;
+		pinctrl-0 = <&pinctrl_q7_gpio0>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
 		reset-gpios = <&tca6424a 21 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/imx6dl-b125pv2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-b125pv2.dts
index ca840fa84052..94625d5d5918 100644
--- a/arch/arm/boot/dts/imx6dl-b125pv2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b125pv2.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0 or MIT
+// SPDX-License-Identifier: GPL-2.0 OR MIT
 //
 // Device Tree Source for General Electric B125Pv2
 //
@@ -22,7 +22,7 @@
 		compatible = "eeti,exc80h60";
 		reg = <0x2a>;
 		pinctrl-names = "default";
-		pinctrl-0 =<&pinctrl_q7_gpio0>;
+		pinctrl-0 = <&pinctrl_q7_gpio0>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		reset-gpios = <&tca6424a 21 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/imx6dl-b125v2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-b125v2.dts
index 81e5a9cb8900..b3cfa8110ade 100644
--- a/arch/arm/boot/dts/imx6dl-b125v2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b125v2.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0 or MIT
+// SPDX-License-Identifier: GPL-2.0 OR MIT
 //
 // Device Tree Source for General Electric B125v2
 //
@@ -22,7 +22,7 @@
 		compatible = "eeti,exc80h60";
 		reg = <0x2a>;
 		pinctrl-names = "default";
-		pinctrl-0 =<&pinctrl_q7_gpio0>;
+		pinctrl-0 = <&pinctrl_q7_gpio0>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		reset-gpios = <&tca6424a 21 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/imx6dl-b155v2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-b155v2.dts
index c861937b30f6..7edc788bcb8f 100644
--- a/arch/arm/boot/dts/imx6dl-b155v2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b155v2.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0 or MIT
+// SPDX-License-Identifier: GPL-2.0 OR MIT
 //
 // Device Tree Source for General Electric B155v2
 //
@@ -22,7 +22,7 @@
 		compatible = "eeti,exc80h84";
 		reg = <0x2a>;
 		pinctrl-names = "default";
-		pinctrl-0 =<&pinctrl_q7_gpio0>;
+		pinctrl-0 = <&pinctrl_q7_gpio0>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		touchscreen-inverted-x;
diff --git a/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-b1x5pv2.dtsi
index ec5b66453156..9f1655540cb9 100644
--- a/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b1x5pv2.dtsi
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0 or MIT
+// SPDX-License-Identifier: GPL-2.0 OR MIT
 //
 // Device Tree Source for General Electric B1x5Pv2
 // patient monitor series
@@ -188,7 +188,7 @@
 	rotary-encoder-key {
 		compatible = "gpio-keys";
 
-		rotary-encoder-press {
+		rotary-encoder-event {
 			label = "rotary-encoder press";
 			gpios = <&tca6424a 0 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_ENTER>;
@@ -211,17 +211,17 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_q7_gpio1 &pinctrl_q7_gpio3 &pinctrl_q7_gpio5>;
 
-		alarm1 {
+		led-alarm1 {
 			label = "alarm:red";
 			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 		};
 
-		alarm2 {
+		led-alarm2 {
 			label = "alarm:yellow";
 			gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>;
 		};
 
-		alarm3 {
+		led-alarm3 {
 			label = "alarm:blue";
 			gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>;
 		};
@@ -257,7 +257,7 @@
 		simple-audio-card,bitclock-master = <&dailink_master>;
 		simple-audio-card,frame-master = <&dailink_master>;
 		simple-audio-card,widgets = "Speaker", "Ext Spk";
-		simple-audio-card,audio-routing = "Ext Spk", "LINE";
+		simple-audio-card,routing = "Ext Spk", "LINE";
 
 		simple-audio-card,cpu {
 			sound-dai = <&ssi1>;
diff --git a/arch/arm/boot/dts/imx6dl-b1x5v2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-b1x5v2.dtsi
index a326a331508e..5dc7f1f9ca17 100644
--- a/arch/arm/boot/dts/imx6dl-b1x5v2.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b1x5v2.dtsi
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0 or MIT
+// SPDX-License-Identifier: GPL-2.0 OR MIT
 //
 // Device Tree Source for General Electric B1x5v2
 // patient monitor series
@@ -47,8 +47,8 @@
 	mpl3115a2: pressure-sensor@60 {
 		compatible = "fsl,mpl3115";
 		reg = <0x60>;
-		vcc-supply = <&reg_3v3_acm>;
-
+		vdd-supply = <&reg_3v3>;
+		vddio-supply = <&reg_3v3>;
 		/*
 		 * The MPL3115 interrupts are connected to pin 22 and 23
 		 * of &tca6424a, but the binding does not yet support
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-aster.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-aster.dts
new file mode 100644
index 000000000000..987058ab0a9b
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-aster.dts
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6dl.dtsi"
+#include "imx6qdl-colibri.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6DL/S on Colibri Aster Board";
+	compatible = "toradex,colibri_imx6dl-aster", "toradex,colibri_imx6dl",
+		     "fsl,imx6dl";
+
+	aliases {
+		i2c0 = &i2c2;
+		i2c1 = &i2c3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+/* Colibri SSP */
+&ecspi4 {
+	cs-gpios = <
+		&gpio5 2 GPIO_ACTIVE_HIGH
+		&gpio5 4 GPIO_ACTIVE_HIGH
+	>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi4 &pinctrl_csi_gpio_2>;
+	status = "okay";
+};
+
+/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */
+&i2c3 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&pinctrl_csi_gpio_1
+		&pinctrl_gpio_2
+		&pinctrl_gpio_aster
+		&pinctrl_usbh_oc_1
+		&pinctrl_usbc_id_1
+		&pinctrl_weim_gpio_5
+	>;
+
+	pinctrl_gpio_aster: gpioastergrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
+			MX6QDL_PAD_NANDF_D6__GPIO2_IO06		0x1b0b0
+			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08		0x1b0b0
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11		0x1b0b0
+		>;
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&reg_usb_host_vbus {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	disable-over-current;
+	status = "okay";
+};
+
+/* Colibri MMC */
+&usdhc1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-eval-v3.dts
new file mode 100644
index 000000000000..f50a26dd34c0
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-eval-v3.dts
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2014-2022 Toradex
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6dl.dtsi"
+#include "imx6qdl-colibri.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6DL/S on Colibri Evaluation Board V3";
+	compatible = "toradex,colibri_imx6dl-eval-v3", "toradex,colibri_imx6dl",
+		     "fsl,imx6dl";
+
+	aliases {
+		i2c0 = &i2c2;
+		i2c1 = &i2c3;
+	};
+
+	aliases {
+		rtc0 = &rtc_i2c;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	/* Fixed crystal dedicated to mcp251x */
+	clk16m: clock-16m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <16000000>;
+		clock-output-names = "clk16m";
+	};
+};
+
+/* Colibri SSP */
+&ecspi4 {
+	status = "okay";
+
+	mcp251x0: mcp251x@0 {
+		compatible = "microchip,mcp2515";
+		clocks = <&clk16m>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <27 0x2>;
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+		status = "okay";
+	};
+};
+
+/*
+ * Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board)
+ */
+&i2c3 {
+	status = "okay";
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&pinctrl_weim_gpio_1 &pinctrl_weim_gpio_2
+		&pinctrl_weim_gpio_3 &pinctrl_weim_gpio_4
+		&pinctrl_weim_gpio_5 &pinctrl_weim_gpio_6
+		&pinctrl_usbh_oc_1 &pinctrl_usbc_id_1
+	>;
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&reg_usb_host_vbus {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	disable-over-current;
+	status = "okay";
+};
+
+/* Colibri MMC */
+&usdhc1 {
+	status = "okay";
+};
+
+&weim {
+	status = "okay";
+
+	/* weim memory map: 32MB on CS0, CS1, CS2 and CS3 */
+	ranges = <0 0 0x08000000 0x02000000
+		  1 0 0x0a000000 0x02000000
+		  2 0 0x0c000000 0x02000000
+		  3 0 0x0e000000 0x02000000>;
+
+	/* SRAM on Colibri nEXT_CS0 */
+	sram@0,0 {
+		compatible = "cypress,cy7c1019dv33-10zsxi", "mtd-ram";
+		reg = <0 0 0x00010000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		bank-width = <2>;
+		fsl,weim-cs-timing = <0x00010081 0x00000000 0x04000000
+				      0x00000000 0x04000040 0x00000000>;
+	};
+
+	/* SRAM on Colibri nEXT_CS1 */
+	sram@1,0 {
+		compatible = "cypress,cy7c1019dv33-10zsxi", "mtd-ram";
+		reg = <1 0 0x00010000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		bank-width = <2>;
+		fsl,weim-cs-timing = <0x00010081 0x00000000 0x04000000
+				      0x00000000 0x04000040 0x00000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-iris-v2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-iris-v2.dts
new file mode 100644
index 000000000000..3a6d3889760d
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-iris-v2.dts
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6dl-colibri-iris.dts"
+
+/ {
+	model = "Toradex Colibri iMX6DL/S on Colibri Iris V2 Board";
+	compatible = "toradex,colibri_imx6dl-iris-v2", "toradex,colibri_imx6dl",
+		     "fsl,imx6dl";
+
+	reg_3v3_vmmc: regulator-3v3-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_3v3_vmmc>;
+		regulator-name = "3v3_vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <100>;
+		enable-active-high;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_iris	&pinctrl_usbh_oc_1 &pinctrl_usbc_id_1>;
+
+	pinctrl_enable_3v3_vmmc: enable3v3vmmcgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11	0x1b0b0
+		>;
+	};
+};
+
+/* Colibri MMC */
+&usdhc1 {
+	cap-power-off-card;
+	/* uncomment the following to enable SD card UHS mode if you have a V1.1 module */
+	/* /delete-property/ no-1-8-v; */
+	vmmc-supply = <&reg_3v3_vmmc>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-iris.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-iris.dts
new file mode 100644
index 000000000000..4303c88bb2a9
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-iris.dts
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6dl.dtsi"
+#include "imx6qdl-colibri.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6DL/S on Colibri Iris Board";
+	compatible = "toradex,colibri_imx6dl-iris", "toradex,colibri_imx6dl",
+		     "fsl,imx6dl";
+
+	aliases {
+		i2c0 = &i2c2;
+		i2c1 = &i2c3;
+	};
+
+	aliases {
+		rtc0 = &rtc_i2c;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+/* Colibri SSP */
+&ecspi4 {
+	status = "okay";
+};
+
+&gpio2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_forceoff &pinctrl_uart23_forceoff>;
+
+	/*
+	 * uart-a-on-x13-enable turns the UART transceiver for UART_A on. If one
+	 * wants to turn the transceiver off, that property has to be deleted
+	 * and the gpio handled in userspace.
+	 * The same applies to uart-b-c-on-x14-enable where the UART_B and
+	 * UART_C transceiver is turned on.
+	 */
+	uart-a-on-x13-enable-hog {
+		gpio-hog;
+		gpios = <4 GPIO_ACTIVE_HIGH>; /* SODIMM 102 */
+		output-high;
+	};
+
+	uart-b-c-on-x14-enable-hog {
+		gpio-hog;
+		gpios = <8 GPIO_ACTIVE_HIGH>; /* SODIMM 104 */
+		output-high;
+	};
+};
+
+/*
+ * Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board)
+ */
+&i2c3 {
+	status = "okay";
+
+	rtc_i2c: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&pinctrl_gpio_iris
+		&pinctrl_usbh_oc_1
+		&pinctrl_usbc_id_1
+	>;
+
+	pinctrl_gpio_iris: gpioirisgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A17__GPIO2_IO21	0x1b0b0
+			MX6QDL_PAD_EIM_A18__GPIO2_IO20	0x1b0b0
+			MX6QDL_PAD_EIM_A19__GPIO2_IO19	0x1b0b0
+			MX6QDL_PAD_EIM_A20__GPIO2_IO18	0x1b0b0
+			MX6QDL_PAD_EIM_A23__GPIO6_IO06	0x1b0b0
+			MX6QDL_PAD_EIM_D27__GPIO3_IO27	0x1b0b0
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03	0x1b0b0
+			MX6QDL_PAD_SD2_DAT0__GPIO1_IO15	0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1_forceoff: uart1forceoffgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart23_forceoff: uart23forceoffgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0
+		>;
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&reg_usb_host_vbus {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	disable-over-current;
+	status = "okay";
+};
+
+/* Colibri MMC */
+&usdhc1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-aster.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-aster.dts
new file mode 100644
index 000000000000..44c78c07f431
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-aster.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2025 Toradex */
+
+/dts-v1/;
+
+#include "imx6dl-colibri-aster.dts"
+#include "imx6qdl-colibri-v1.2.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6DL/S V1.2+ on Colibri Aster Board";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-eval-v3.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-eval-v3.dts
new file mode 100644
index 000000000000..93fd0af53a3c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-eval-v3.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2025 Toradex */
+
+/dts-v1/;
+
+#include "imx6dl-colibri-eval-v3.dts"
+#include "imx6qdl-colibri-v1.2.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6DL/S V1.2+ on Colibri Evaluation Board V3";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-iris-v2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-iris-v2.dts
new file mode 100644
index 000000000000..92d41fc9a13f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-iris-v2.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2025 Toradex */
+
+/dts-v1/;
+
+#include "imx6dl-colibri-iris-v2.dts"
+#include "imx6qdl-colibri-v1.2.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6DL/S V1.2+ on Colibri Iris V2 Board";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-iris.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-iris.dts
new file mode 100644
index 000000000000..c8957948c887
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-colibri-v1.2-iris.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2025 Toradex */
+
+/dts-v1/;
+
+#include "imx6dl-colibri-iris.dts"
+#include "imx6qdl-colibri-v1.2.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6DL/S V1.2+ on Colibri Iris Board";
+};
diff --git a/arch/arm/boot/dts/imx6dl-cubox-i-emmc-som-v15.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-cubox-i-emmc-som-v15.dts
index 2b2fc360b865..2b2fc360b865 100644
--- a/arch/arm/boot/dts/imx6dl-cubox-i-emmc-som-v15.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-cubox-i-emmc-som-v15.dts
diff --git a/arch/arm/boot/dts/imx6dl-cubox-i-som-v15.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-cubox-i-som-v15.dts
index e09c565d1d1f..e09c565d1d1f 100644
--- a/arch/arm/boot/dts/imx6dl-cubox-i-som-v15.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-cubox-i-som-v15.dts
diff --git a/arch/arm/boot/dts/imx6dl-cubox-i.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-cubox-i.dts
index 2b1b3e193f53..2b1b3e193f53 100644
--- a/arch/arm/boot/dts/imx6dl-cubox-i.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-cubox-i.dts
diff --git a/arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-dfi-fs700-m60.dts
index cece4aafdad8..cece4aafdad8 100644
--- a/arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-dfi-fs700-m60.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-dhcom-pdk2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-dhcom-pdk2.dts
new file mode 100644
index 000000000000..38235925257a
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-dhcom-pdk2.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2024 Marek Vasut <marex@denx.de>
+ *
+ * DHCOM iMX6 variant:
+ * DHCM-iMX6DL-C080-R102-F0819-E-SD-RTC-T-HS-I-01D2
+ * DHCOM PCB number: 493-400 or newer
+ * PDK2 PCB number: 516-400 or newer
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-dhcom-som.dtsi"
+#include "imx6qdl-dhcom-pdk2.dtsi"
+
+/ {
+	model = "DH electronics i.MX6DL DHCOM on Premium Developer Kit (2)";
+	compatible = "dh,imx6dl-dhcom-pdk2", "dh,imx6dl-dhcom-som",
+		     "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-dhcom-picoitx.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-dhcom-picoitx.dts
index 038bb0025556..775caf8208c5 100644
--- a/arch/arm/boot/dts/imx6dl-dhcom-picoitx.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-dhcom-picoitx.dts
@@ -3,7 +3,7 @@
  * Copyright (C) 2021 DH electronics GmbH
  *
  * DHCOM iMX6 variant:
- * DHCM-iMX6DL-C0800-R102-F0819-E-SD-RTC-T-HS-I-01D2
+ * DHCM-iMX6DL-C080-R102-F0819-E-SD-RTC-T-HS-I-01D2
  * DHCOM PCB number: 493-300 or newer
  * PicoITX PCB number: 487-600 or newer
  */
diff --git a/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-eckelmann-ci4x10.dts
index b4a9523e325b..5ed55f74b398 100644
--- a/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-eckelmann-ci4x10.dts
@@ -28,6 +28,7 @@
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
 	};
 
 	reg_usb_h1_vbus: regulator-usb-h1-vbus {
@@ -64,6 +65,13 @@
 	status = "okay";
 };
 
+&clks {
+	clocks = <&rmii_clk>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&rmii_clk>;
+};
+
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi2>;
@@ -131,7 +139,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
 
-	pinctrl_hog: hog {
+	pinctrl_hog: hoggrp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x00000018 /* buzzer */
 			MX6QDL_PAD_KEY_COL1__GPIO4_IO08		0x00000018 /* OUT_1 */
@@ -297,7 +305,6 @@
 	phy-mode = "rmii";
 	phy-reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
 	phy-handle = <&phy>;
-	clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&rmii_clk>;
 	status = "okay";
 
 	mdio {
diff --git a/arch/arm/boot/dts/imx6dl-emcon-avari.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-emcon-avari.dts
index 407ad8d43c84..77d7600b2675 100644
--- a/arch/arm/boot/dts/imx6dl-emcon-avari.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-emcon-avari.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0 or MIT)
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
 //
 // Copyright (C) 2018 emtrion GmbH
 //
diff --git a/arch/arm/boot/dts/imx6dl-gw51xx.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw51xx.dts
index 9956d12a1245..9956d12a1245 100644
--- a/arch/arm/boot/dts/imx6dl-gw51xx.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw51xx.dts
diff --git a/arch/arm/boot/dts/imx6dl-gw52xx.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw52xx.dts
index 9ea23dd54f3c..9ea23dd54f3c 100644
--- a/arch/arm/boot/dts/imx6dl-gw52xx.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw52xx.dts
diff --git a/arch/arm/boot/dts/imx6dl-gw53xx.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw53xx.dts
index 182e8194c249..182e8194c249 100644
--- a/arch/arm/boot/dts/imx6dl-gw53xx.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw53xx.dts
diff --git a/arch/arm/boot/dts/imx6dl-gw54xx.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw54xx.dts
index a106c4e3e329..a106c4e3e329 100644
--- a/arch/arm/boot/dts/imx6dl-gw54xx.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw54xx.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-gw551x.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw551x.dts
new file mode 100644
index 000000000000..50dd3df9dd04
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw551x.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2014 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw551x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW551X";
+	compatible = "gw,imx6dl-gw551x", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-gw552x.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw552x.dts
index 4864a36f9b36..4864a36f9b36 100644
--- a/arch/arm/boot/dts/imx6dl-gw552x.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw552x.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-gw553x.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw553x.dts
new file mode 100644
index 000000000000..8ca5b6b8da07
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw553x.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2016 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw553x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW553X";
+	compatible = "gw,imx6dl-gw553x", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-gw560x.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw560x.dts
new file mode 100644
index 000000000000..b94455406a57
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw560x.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2017 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw560x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW560X";
+	compatible = "gw,imx6dl-gw560x", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-gw5903.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw5903.dts
new file mode 100644
index 000000000000..dd978105b42f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw5903.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2017 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw5903.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Duallite/Solo GW5903";
+	compatible = "gw,imx6dl-gw5903", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-gw5904.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw5904.dts
new file mode 100644
index 000000000000..172dad423639
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw5904.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2017 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw5904.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW5904";
+	compatible = "gw,imx6dl-gw5904", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-gw5907.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw5907.dts
index 3fa2822beffc..3fa2822beffc 100644
--- a/arch/arm/boot/dts/imx6dl-gw5907.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw5907.dts
diff --git a/arch/arm/boot/dts/imx6dl-gw5910.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw5910.dts
index 0d5e7e5da536..0d5e7e5da536 100644
--- a/arch/arm/boot/dts/imx6dl-gw5910.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw5910.dts
diff --git a/arch/arm/boot/dts/imx6dl-gw5912.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw5912.dts
index 5260e0142d63..5260e0142d63 100644
--- a/arch/arm/boot/dts/imx6dl-gw5912.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw5912.dts
diff --git a/arch/arm/boot/dts/imx6dl-gw5913.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-gw5913.dts
index b74e533c8e67..b74e533c8e67 100644
--- a/arch/arm/boot/dts/imx6dl-gw5913.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-gw5913.dts
diff --git a/arch/arm/boot/dts/imx6dl-hummingboard-emmc-som-v15.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-hummingboard-emmc-som-v15.dts
index a63f742f20d9..a63f742f20d9 100644
--- a/arch/arm/boot/dts/imx6dl-hummingboard-emmc-som-v15.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-hummingboard-emmc-som-v15.dts
diff --git a/arch/arm/boot/dts/imx6dl-hummingboard-som-v15.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-hummingboard-som-v15.dts
index 66a06cf3cdf3..66a06cf3cdf3 100644
--- a/arch/arm/boot/dts/imx6dl-hummingboard-som-v15.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-hummingboard-som-v15.dts
diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-hummingboard.dts
index cbd02eb486e1..cbd02eb486e1 100644
--- a/arch/arm/boot/dts/imx6dl-hummingboard.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-hummingboard.dts
diff --git a/arch/arm/boot/dts/imx6dl-hummingboard2-emmc-som-v15.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-hummingboard2-emmc-som-v15.dts
index 80313c13bcdb..80313c13bcdb 100644
--- a/arch/arm/boot/dts/imx6dl-hummingboard2-emmc-som-v15.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-hummingboard2-emmc-som-v15.dts
diff --git a/arch/arm/boot/dts/imx6dl-hummingboard2-som-v15.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-hummingboard2-som-v15.dts
index e61ef1156f8b..e61ef1156f8b 100644
--- a/arch/arm/boot/dts/imx6dl-hummingboard2-som-v15.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-hummingboard2-som-v15.dts
diff --git a/arch/arm/boot/dts/imx6dl-hummingboard2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-hummingboard2.dts
index b12cd87f3f94..b12cd87f3f94 100644
--- a/arch/arm/boot/dts/imx6dl-hummingboard2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-hummingboard2.dts
diff --git a/arch/arm/boot/dts/imx6dl-icore-mipi.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-icore-mipi.dts
index d8f3821a0ffd..d8f3821a0ffd 100644
--- a/arch/arm/boot/dts/imx6dl-icore-mipi.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-icore-mipi.dts
diff --git a/arch/arm/boot/dts/imx6dl-icore-rqs.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-icore-rqs.dts
index 73d710d34b9d..73d710d34b9d 100644
--- a/arch/arm/boot/dts/imx6dl-icore-rqs.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-icore-rqs.dts
diff --git a/arch/arm/boot/dts/imx6dl-icore.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-icore.dts
index 80fa60607ab1..80fa60607ab1 100644
--- a/arch/arm/boot/dts/imx6dl-icore.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-icore.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i-ads2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i-ads2.dts
new file mode 100644
index 000000000000..6a0c53f23a15
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i-ads2.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-kontron-samx6i.dtsi"
+#include "imx6qdl-kontron-samx6i-ads2.dtsi"
+
+/ {
+	model = "Kontron SMARC-sAMX6i Dual-Lite/Solo on SMARC Eval 2.0 carrier";
+	compatible = "kontron,imx6dl-samx6i-ads2", "kontron,imx6dl-samx6i", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-kontron-samx6i.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i.dtsi
index a864fdbd5f16..5a9b819d7ee8 100644
--- a/arch/arm/boot/dts/imx6dl-kontron-samx6i.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i.dtsi
@@ -7,6 +7,6 @@
 #include "imx6qdl-kontron-samx6i.dtsi"
 
 / {
-	model = "Kontron SMARC sAMX6i Dual-Lite/Solo";
+	model = "Kontron SMARC-sAMX6i Dual-Lite/Solo";
 	compatible = "kontron,imx6dl-samx6i", "fsl,imx6dl";
 };
diff --git a/arch/arm/boot/dts/imx6dl-lanmcu.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-lanmcu.dts
index 6b6e6fcdea9c..47a6d63c8e04 100644
--- a/arch/arm/boot/dts/imx6dl-lanmcu.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-lanmcu.dts
@@ -21,6 +21,7 @@
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
 	};
 
 	backlight: backlight {
@@ -71,6 +72,7 @@
 	panel {
 		compatible = "edt,etm0700g0bdh6";
 		backlight = <&backlight>;
+		power-supply = <&reg_panel>;
 
 		port {
 			panel_in: endpoint {
@@ -88,6 +90,13 @@
 		enable-active-high;
 	};
 
+	reg_panel: regulator-panel {
+		compatible = "regulator-fixed";
+		regulator-name = "panel";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	usdhc2_wifi_pwrseq: usdhc2-wifi-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		pinctrl-names = "default";
@@ -109,14 +118,17 @@
 	status = "okay";
 };
 
+&clks {
+	clocks = <&clock_ksz8081>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clock_ksz8081>;
+};
+
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rmii";
-	clocks = <&clks IMX6QDL_CLK_ENET>,
-		 <&clks IMX6QDL_CLK_ENET>,
-		 <&clock_ksz8081>;
-	clock-names = "ipg", "ahb", "ptp";
 	phy-handle = <&rgmii_phy>;
 	status = "okay";
 
@@ -253,9 +265,18 @@
 	pinctrl-0 = <&pinctrl_usbotg>;
 	phy_type = "utmi";
 	dr_mode = "host";
+	over-current-active-low;
 	status = "okay";
 };
 
+&usbphynop1 {
+	status = "disabled";
+};
+
+&usbphynop2 {
+	status = "disabled";
+};
+
 &usdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
diff --git a/arch/arm/boot/dts/imx6dl-mamoj.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-mamoj.dts
index 028951955bde..ec5a9bf40677 100644
--- a/arch/arm/boot/dts/imx6dl-mamoj.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-mamoj.dts
@@ -21,7 +21,7 @@
 
 	backlight_lcd: backlight-lcd {
 		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 25000>; /* 25000ns -> 40kHz */
+		pwms = <&pwm3 0 25000 0>; /* 25000ns -> 40kHz */
 		brightness-levels = <0 4 8 16 32 64 128 160 192 224 255>;
 		default-brightness-level = <7>;
 	};
@@ -303,7 +303,6 @@
 };
 
 &pwm3 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";
@@ -396,7 +395,7 @@
 		>;
 	};
 
-	pinctrl_ipu1_lcdif: pinctrlipu1lcdif { /* parallel port 24-bit */
+	pinctrl_ipu1_lcdif: pinctrlipu1lcdifgrp { /* parallel port 24-bit */
 		fsl,pins = <
 			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 /* VDOUT_PCLK */
 			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-mba6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-mba6.dtsi
new file mode 100644
index 000000000000..b749b424bbd6
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-mba6.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+&ethphy {
+	rxdv-skew-ps = <180>;
+	txen-skew-ps = <0>;
+	rxd3-skew-ps = <180>;
+	rxd2-skew-ps = <180>;
+	rxd1-skew-ps = <180>;
+	rxd0-skew-ps = <180>;
+	txd3-skew-ps = <120>;
+	txd2-skew-ps = <0>;
+	txd1-skew-ps = <300>;
+	txd0-skew-ps = <120>;
+	txc-skew-ps = <1860>;
+	rxc-skew-ps = <1860>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-mba6a.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-mba6a.dts
new file mode 100644
index 000000000000..df0a96b28af0
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-mba6a.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6dl-tqma6a.dtsi"
+#include "imx6qdl-mba6.dtsi"
+#include "imx6qdl-mba6a.dtsi"
+#include "imx6dl-mba6.dtsi"
+
+/ {
+	model = "TQ TQMa6S/DL on MBa6x";
+	compatible = "tq,imx6dl-mba6x-a", "tq,mba6a",
+		     "tq,imx6dl-tqma6dl-a", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-mba6b.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-mba6b.dts
new file mode 100644
index 000000000000..610b19d2db0f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-mba6b.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6dl-tqma6b.dtsi"
+#include "imx6qdl-mba6.dtsi"
+#include "imx6qdl-mba6b.dtsi"
+#include "imx6dl-mba6.dtsi"
+
+/ {
+	model = "TQ TQMa6S/DL on MBa6x";
+	compatible = "tq,imx6dl-mba6x-b", "tq,mba6b",
+		     "tq,imx6dl-tqma6dl-b", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-nit6xlite.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-nit6xlite.dts
index 61fa30991d67..61fa30991d67 100644
--- a/arch/arm/boot/dts/imx6dl-nit6xlite.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-nit6xlite.dts
diff --git a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-nitrogen6x.dts
index ef58d3b0ea0d..ef58d3b0ea0d 100644
--- a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-nitrogen6x.dts
diff --git a/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-phytec-mira-rdk-nand.dts
index 9f7f9f98139d..d906a7f05aaa 100644
--- a/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-phytec-mira-rdk-nand.dts
@@ -8,6 +8,9 @@
 #include "imx6dl.dtsi"
 #include "imx6qdl-phytec-phycore-som.dtsi"
 #include "imx6qdl-phytec-mira.dtsi"
+#include "imx6qdl-phytec-mira-peb-eval-01.dtsi"
+#include "imx6qdl-phytec-mira-peb-av-02.dtsi"
+#include "imx6qdl-phytec-mira-peb-wlbt-05.dtsi"
 
 / {
 	model = "PHYTEC phyBOARD-Mira DualLite/Solo Carrier-Board with NAND";
diff --git a/arch/arm/boot/dts/imx6dl-phytec-pbab01.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-phytec-pbab01.dts
index 0a07cc6f815e..0a07cc6f815e 100644
--- a/arch/arm/boot/dts/imx6dl-phytec-pbab01.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-phytec-pbab01.dts
diff --git a/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-phytec-pfla02.dtsi
index 6f8aaf524425..6f8aaf524425 100644
--- a/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-phytec-pfla02.dtsi
diff --git a/arch/arm/boot/dts/imx6dl-pico-dwarf.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-pico-dwarf.dts
index d85b15a8c127..d85b15a8c127 100644
--- a/arch/arm/boot/dts/imx6dl-pico-dwarf.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-pico-dwarf.dts
diff --git a/arch/arm/boot/dts/imx6dl-pico-hobbit.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-pico-hobbit.dts
index 08fedcbcc91b..08fedcbcc91b 100644
--- a/arch/arm/boot/dts/imx6dl-pico-hobbit.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-pico-hobbit.dts
diff --git a/arch/arm/boot/dts/imx6dl-pico-nymph.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-pico-nymph.dts
index 32ccfc5d41ce..32ccfc5d41ce 100644
--- a/arch/arm/boot/dts/imx6dl-pico-nymph.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-pico-nymph.dts
diff --git a/arch/arm/boot/dts/imx6dl-pico-pi.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-pico-pi.dts
index 4590e8ad9a91..4590e8ad9a91 100644
--- a/arch/arm/boot/dts/imx6dl-pico-pi.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-pico-pi.dts
diff --git a/arch/arm/boot/dts/imx6dl-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx6dl-pinfunc.h
index 9d88d09f9bf6..9d88d09f9bf6 100644
--- a/arch/arm/boot/dts/imx6dl-pinfunc.h
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-pinfunc.h
diff --git a/arch/arm/boot/dts/imx6dl-plybas.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-plybas.dts
index bf72a67a9c76..84f34da06267 100644
--- a/arch/arm/boot/dts/imx6dl-plybas.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-plybas.dts
@@ -75,6 +75,7 @@
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
 	};
 
 	reg_5v0: regulator-5v0 {
@@ -99,6 +100,13 @@
 	status = "okay";
 };
 
+&clks {
+	clocks = <&clk50m_phy>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clk50m_phy>;
+};
+
 &ecspi1 {
 	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
@@ -116,10 +124,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rmii";
-	clocks = <&clks IMX6QDL_CLK_ENET>,
-		 <&clks IMX6QDL_CLK_ENET>,
-		 <&clk50m_phy>;
-	clock-names = "ipg", "ahb", "ptp";
 	phy-handle = <&rgmii_phy>;
 	status = "okay";
 
@@ -214,7 +218,7 @@
 &uart2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	linux,rs485-enabled-at-boot-time;
 	rs485-rts-delay = <0 20>;
 	status = "okay";
@@ -231,7 +235,7 @@
 	pinctrl-0 = <&pinctrl_usbotg>;
 	phy_type = "utmi";
 	dr_mode = "host";
-	disable-over-current;
+	over-current-active-low;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6dl-plym2m.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-plym2m.dts
index 60fe5f14666e..0ef24a07dedf 100644
--- a/arch/arm/boot/dts/imx6dl-plym2m.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-plym2m.dts
@@ -50,6 +50,11 @@
 		};
 	};
 
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&vdiv_vaccu>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -79,6 +84,7 @@
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
 	};
 
 	reg_3v3: regulator-3v3 {
@@ -101,6 +107,88 @@
 		regulator-min-microvolt = <12000000>;
 		regulator-max-microvolt = <12000000>;
 	};
+
+	thermal-zones {
+		chassis-thermal {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&tsens0>;
+
+			trips {
+				alert {
+					temperature = <85000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
+		};
+
+		touch-0-thermal {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&touch_temp0>;
+
+			trips {
+				alert {
+					temperature = <85000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
+		};
+
+		touch-1-thermal {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&touch_temp1>;
+
+			trips {
+				alert {
+					temperature = <85000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
+		};
+	};
+
+	touchscreen {
+		compatible = "resistive-adc-touch";
+		io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>,
+                              <&adc_ts 5>;
+		io-channel-names = "y", "z1", "z2", "x";
+		touchscreen-min-pressure = <64687>;
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+		touchscreen-x-plate-ohms = <300>;
+		touchscreen-y-plate-ohms = <800>;
+	};
+
+	touch_temp0: touch-temperature-sensor0 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&adc_ts 0>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-40000) 736
+						85000 474>;
+	};
+
+	touch_temp1: touch-temperature-sensor1 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&adc_ts 7>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-40000) 826
+						85000 609>;
+	};
+
+	vdiv_vaccu: voltage-divider-vaccu {
+		compatible = "voltage-divider";
+		io-channels = <&adc_ts 2>;
+		output-ohms = <2500>;
+		full-ohms = <64000>;
+		#io-channel-cells = <0>;
+	};
 };
 
 &can1 {
@@ -110,6 +198,13 @@
 	status = "okay";
 };
 
+&clks {
+	clocks = <&clk50m_phy>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clk50m_phy>;
+};
+
 &ecspi1 {
 	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
@@ -129,26 +224,61 @@
 	pinctrl-0 = <&pinctrl_ecspi2>;
 	status = "okay";
 
-	touchscreen@0 {
-		compatible = "ti,tsc2046";
+	adc_ts: adc@0 {
+		compatible = "ti,tsc2046e-adc";
 		reg = <0>;
 		pinctrl-0 = <&pinctrl_tsc2046>;
-		pinctrl-names ="default";
-		spi-max-frequency = <100000>;
-		interrupts-extended = <&gpio3 20 IRQ_TYPE_EDGE_FALLING>;
-		pendown-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		spi-max-frequency = <1000000>;
+		interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>;
+		#io-channel-cells = <1>;
 
-		touchscreen-inverted-x;
-		touchscreen-inverted-y;
-		touchscreen-max-pressure = <4095>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@0 {
+			reg = <0>;
+			settling-time-us = <300>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@1 {
+			reg = <1>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@2 {
+			reg = <2>;
+			settling-time-us = <300>;
+			oversampling-ratio = <5>;
+		};
 
-		ti,vref-delay-usecs = /bits/ 16 <100>;
-		ti,x-plate-ohms = /bits/ 16 <800>;
-		ti,y-plate-ohms = /bits/ 16 <300>;
-		ti,debounce-max = /bits/ 16 <3>;
-		ti,debounce-tol = /bits/ 16 <70>;
-		ti,debounce-rep = /bits/ 16 <3>;
-		wakeup-source;
+		channel@3 {
+			reg = <3>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@4 {
+			reg = <4>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@5 {
+			reg = <5>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		/* channel 6 is not connected */
+
+		channel@7 {
+			reg = <7>;
+			settling-time-us = <300>;
+			oversampling-ratio = <5>;
+		};
 	};
 };
 
@@ -156,10 +286,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rmii";
-	clocks = <&clks IMX6QDL_CLK_ENET>,
-		 <&clks IMX6QDL_CLK_ENET>,
-		 <&clk50m_phy>;
-	clock-names = "ipg", "ahb", "ptp";
 	phy-handle = <&rgmii_phy>;
 	status = "okay";
 
@@ -233,9 +359,10 @@
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
 
-	temperature-sensor@70 {
+	tsens0: temperature-sensor@70 {
 		compatible = "ti,tmp103";
 		reg = <0x70>;
+		#thermal-sensor-cells = <0>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx6dl-prtmvt.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-prtmvt.dts
index a35a1c66e770..2160b7177835 100644
--- a/arch/arm/boot/dts/imx6dl-prtmvt.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-prtmvt.dts
@@ -51,98 +51,98 @@
 		pinctrl-0 = <&pinctrl_gpiokeys>;
 		autorepeat;
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			wakeup-source;
 		};
 
-		f1 {
+		key-f1 {
 			label = "GPIO Key F1";
 			linux,code = <KEY_F1>;
 			gpios = <&gpio_pca 0 GPIO_ACTIVE_LOW>;
 		};
 
-		f2 {
+		key-f2 {
 			label = "GPIO Key F2";
 			linux,code = <KEY_F2>;
 			gpios = <&gpio_pca 1 GPIO_ACTIVE_LOW>;
 		};
 
-		f3 {
+		key-f3 {
 			label = "GPIO Key F3";
 			linux,code = <KEY_F3>;
 			gpios = <&gpio_pca 2 GPIO_ACTIVE_LOW>;
 		};
 
-		f4 {
+		key-f4 {
 			label = "GPIO Key F4";
 			linux,code = <KEY_F4>;
 			gpios = <&gpio_pca 3 GPIO_ACTIVE_LOW>;
 		};
 
-		f5 {
+		key-f5 {
 			label = "GPIO Key F5";
 			linux,code = <KEY_F5>;
 			gpios = <&gpio_pca 4 GPIO_ACTIVE_LOW>;
 		};
 
-		cycle {
+		key-cycle {
 			label = "GPIO Key CYCLE";
 			linux,code = <KEY_CYCLEWINDOWS>;
 			gpios = <&gpio_pca 5 GPIO_ACTIVE_LOW>;
 		};
 
-		esc {
+		key-esc {
 			label = "GPIO Key ESC";
 			linux,code = <KEY_ESC>;
 			gpios = <&gpio_pca 6 GPIO_ACTIVE_LOW>;
 		};
 
-		up {
+		key-up {
 			label = "GPIO Key UP";
 			linux,code = <KEY_UP>;
 			gpios = <&gpio_pca 7 GPIO_ACTIVE_LOW>;
 		};
 
-		down {
+		key-down {
 			label = "GPIO Key DOWN";
 			linux,code = <KEY_DOWN>;
 			gpios = <&gpio_pca 8 GPIO_ACTIVE_LOW>;
 		};
 
-		ok {
+		key-ok {
 			label = "GPIO Key OK";
 			linux,code = <KEY_OK>;
 			gpios = <&gpio_pca 9 GPIO_ACTIVE_LOW>;
 		};
 
-		f6 {
+		key-f6 {
 			label = "GPIO Key F6";
 			linux,code = <KEY_F6>;
 			gpios = <&gpio_pca 10 GPIO_ACTIVE_LOW>;
 		};
 
-		f7 {
+		key-f7 {
 			label = "GPIO Key F7";
 			linux,code = <KEY_F7>;
 			gpios = <&gpio_pca 11 GPIO_ACTIVE_LOW>;
 		};
 
-		f8 {
+		key-f8 {
 			label = "GPIO Key F8";
 			linux,code = <KEY_F8>;
 			gpios = <&gpio_pca 12 GPIO_ACTIVE_LOW>;
 		};
 
-		f9 {
+		key-f9 {
 			label = "GPIO Key F9";
 			linux,code = <KEY_F9>;
 			gpios = <&gpio_pca 13 GPIO_ACTIVE_LOW>;
 		};
 
-		f10 {
+		key-f10 {
 			label = "GPIO Key F10";
 			linux,code = <KEY_F10>;
 			gpios = <&gpio_pca 14 GPIO_ACTIVE_LOW>;
@@ -193,6 +193,7 @@
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
 	};
 
 	reg_1v8: regulator-1v8 {
@@ -293,8 +294,10 @@
 };
 
 &clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
+	clocks = <&clk50m_phy>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, <&clk50m_phy>;
 };
 
 &ecspi1 {
@@ -314,10 +317,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rmii";
-	clocks = <&clks IMX6QDL_CLK_ENET>,
-		 <&clks IMX6QDL_CLK_ENET>,
-		 <&clk50m_phy>;
-	clock-names = "ipg", "ahb", "ptp";
 	phy-handle = <&rmii_phy>;
 	status = "okay";
 
@@ -558,9 +557,9 @@
 
 &usbh1 {
 	vbus-supply = <&reg_h1_vbus>;
-	pinctrl-names = "default";
 	phy_type = "utmi";
 	dr_mode = "host";
+	disable-over-current;
 	status = "okay";
 };
 
@@ -570,10 +569,18 @@
 	pinctrl-0 = <&pinctrl_usbotg>;
 	phy_type = "utmi";
 	dr_mode = "host";
-	disable-over-current;
+	over-current-active-low;
 	status = "okay";
 };
 
+&usbphynop1 {
+	status = "disabled";
+};
+
+&usbphynop2 {
+	status = "disabled";
+};
+
 &usdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
@@ -765,7 +772,7 @@
 		>;
 	};
 
-	pinctrl_pca9539: pca9539 {
+	pinctrl_pca9539: pca9539grp {
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_19__GPIO4_IO05			0x1b0b0
 		>;
diff --git a/arch/arm/boot/dts/imx6dl-prtrvt.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-prtrvt.dts
index 5ac84445e9cc..e543c4f2bc94 100644
--- a/arch/arm/boot/dts/imx6dl-prtrvt.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-prtrvt.dts
@@ -67,11 +67,9 @@
 		ti,enable-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>,
 				  <&gpio5 11 GPIO_ACTIVE_LOW>;
 		vin-supply = <&reg_3v3>;
-		vin-voltage-override = <3100000>;
 		autosuspend-delay = <30000>;
 		irq-status-read-quirk;
 		en2-rf-quirk;
-		t5t-rmb-extra-byte-quirk;
 		status = "okay";
 	};
 };
@@ -126,12 +124,16 @@
 	status = "disabled";
 };
 
+&usbotg {
+	disable-over-current;
+};
+
 &vpu {
 	status = "disabled";
 };
 
 &iomuxc {
-	pinctrl_can1phy: can1phy {
+	pinctrl_can1phy: can1phygrp {
 		fsl,pins = <
 			/* CAN1_SR */
 			MX6QDL_PAD_KEY_COL3__GPIO4_IO12	0x13070
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-prtvt7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-prtvt7.dts
new file mode 100644
index 000000000000..353f7097cb7e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-prtvt7.dts
@@ -0,0 +1,612 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2016 Protonic Holland
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-prti6q.dtsi"
+#include <dt-bindings/display/sdtv-standards.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	model = "Protonic VT7";
+	compatible = "prt,prtvt7", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	backlight_lcd: backlight-lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 500000 0>;
+		brightness-levels = <0 20 81 248 1000>;
+		default-brightness-level = <65>;
+		num-interpolated-steps = <21>;
+		power-supply = <&reg_bl_12v0>;
+	};
+
+	display {
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-0 = <&pinctrl_ipu1_disp>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			display_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&vdiv_vaccu 0>;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		key-esc {
+			label = "GPIO Key ESC";
+			linux,code = <KEY_ESC>;
+			gpios = <&gpio_pca 0 GPIO_ACTIVE_LOW>;
+		};
+
+		key-up {
+			label = "GPIO Key UP";
+			linux,code = <KEY_UP>;
+			gpios = <&gpio_pca 1 GPIO_ACTIVE_LOW>;
+		};
+
+		key-down {
+			label = "GPIO Key DOWN";
+			linux,code = <KEY_DOWN>;
+			gpios = <&gpio_pca 4 GPIO_ACTIVE_LOW>;
+		};
+
+		key-enter {
+			label = "GPIO Key Enter";
+			linux,code = <KEY_ENTER>;
+			gpios = <&gpio_pca 3 GPIO_ACTIVE_LOW>;
+		};
+
+		key-cycle {
+			label = "GPIO Key CYCLE";
+			linux,code = <KEY_CYCLEWINDOWS>;
+			gpios = <&gpio_pca 2 GPIO_ACTIVE_LOW>;
+		};
+
+		key-f1 {
+			label = "GPIO Key F1";
+			linux,code = <KEY_F1>;
+			gpios = <&gpio_pca 14 GPIO_ACTIVE_LOW>;
+		};
+
+		key-f2 {
+			label = "GPIO Key F2";
+			linux,code = <KEY_F2>;
+			gpios = <&gpio_pca 13 GPIO_ACTIVE_LOW>;
+		};
+
+		key-f3 {
+			label = "GPIO Key F3";
+			linux,code = <KEY_F3>;
+			gpios = <&gpio_pca 12 GPIO_ACTIVE_LOW>;
+		};
+
+		key-f4 {
+			label = "GPIO Key F4";
+			linux,code = <KEY_F4>;
+			gpios = <&gpio_pca 11 GPIO_ACTIVE_LOW>;
+		};
+
+		key-f5 {
+			label = "GPIO Key F5";
+			linux,code = <KEY_F5>;
+			gpios = <&gpio_pca 10 GPIO_ACTIVE_LOW>;
+		};
+
+		key-f6 {
+			label = "GPIO Key F6";
+			linux,code = <KEY_F6>;
+			gpios = <&gpio_pca 5 GPIO_ACTIVE_LOW>;
+		};
+
+		key-f7 {
+			label = "GPIO Key F7";
+			linux,code = <KEY_F7>;
+			gpios = <&gpio_pca 6 GPIO_ACTIVE_LOW>;
+		};
+
+		key-f8 {
+			label = "GPIO Key F8";
+			linux,code = <KEY_F8>;
+			gpios = <&gpio_pca 7 GPIO_ACTIVE_LOW>;
+		};
+
+		key-f9 {
+			label = "GPIO Key F9";
+			linux,code = <KEY_F9>;
+			gpios = <&gpio_pca 8 GPIO_ACTIVE_LOW>;
+		};
+
+		key-f10 {
+			label = "GPIO Key F10";
+			linux,code = <KEY_F10>;
+			gpios = <&gpio_pca 9 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-debug0 {
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	panel {
+		compatible = "innolux,g070y2-t02";
+		backlight = <&backlight_lcd>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
+	connector {
+		compatible = "composite-video-connector";
+		label = "Composite0";
+		sdtv-standards = <SDTV_STD_PAL_B>;
+
+		port {
+			comp0_out: endpoint {
+				remote-endpoint = <&tvp5150_comp0_in>;
+			};
+		};
+	};
+
+	reg_bl_12v0: regulator-bl-12v0 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_bl_12v0>;
+		regulator-name = "bl-12v0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "prti6q-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Line", "Line In Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "External Speaker";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"External Speaker", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+			system-clock-frequency = <0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+			bitclock-master;
+			frame-master;
+		};
+	};
+
+	thermal-zones {
+		chassis-thermal {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&tsens0>;
+
+			trips {
+				alert {
+					temperature = <105000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
+		};
+
+		touch-0-thermal {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&touch_temp0>;
+
+			trips {
+				alert {
+					temperature = <105000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
+		};
+
+		touch-1-thermal {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&touch_temp1>;
+
+			trips {
+				alert {
+					temperature = <105000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
+		};
+	};
+
+	touchscreen {
+		compatible = "resistive-adc-touch";
+		io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>,
+                              <&adc_ts 5>;
+		io-channel-names = "y", "z1", "z2", "x";
+		touchscreen-min-pressure = <64687>;
+		touchscreen-x-plate-ohms = <300>;
+		touchscreen-y-plate-ohms = <800>;
+	};
+
+	touch_temp0: touch-temperature-sensor0 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&adc_ts 0>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-40000) 736
+						85000 474>;
+	};
+
+	touch_temp1: touch-temperature-sensor1 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&adc_ts 7>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-40000) 826
+						85000 609>;
+	};
+
+	vdiv_vaccu: voltage-divider-vaccu {
+		compatible = "voltage-divider";
+		io-channels = <&adc_ts 2>;
+		output-ohms = <2500>;
+		full-ohms = <64000>;
+		#io-channel-cells = <1>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+
+	mux-ssi1 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN		0
+			IMX_AUDMUX_V2_PTCR_TFSEL(2)	0
+			IMX_AUDMUX_V2_PTCR_TCSEL(2)	0
+			IMX_AUDMUX_V2_PTCR_TFSDIR	0
+			IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2)
+		>;
+	};
+
+	mux-pins3 {
+		fsl,audmux-port = <2>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+			0		       IMX_AUDMUX_V2_PDCR_TXRXEN
+		>;
+	};
+};
+
+&can1 {
+	pinctrl-0 = <&pinctrl_can1 &pinctrl_can1phy>;
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+
+	adc_ts: adc@0 {
+		compatible = "ti,tsc2046e-adc";
+		reg = <0>;
+		pinctrl-0 = <&pinctrl_tsc>;
+		pinctrl-names = "default";
+		spi-max-frequency = <1000000>;
+		interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>;
+		#io-channel-cells = <1>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@1 {
+			reg = <1>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@3 {
+			reg = <3>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@4 {
+			reg = <4>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@5 {
+			reg = <5>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+	};
+};
+
+&i2c1 {
+	sgtl5000: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0xa>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_codec>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&reg_3v3>;
+		VDDIO-supply = <&reg_3v3>;
+		VDDD-supply = <&reg_1v8>;
+	};
+
+	video@5c {
+		compatible = "ti,tvp5150";
+		reg = <0x5c>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			tvp5150_comp0_in: endpoint {
+				remote-endpoint = <&comp0_out>;
+			};
+		};
+
+		/* Output port 2 is video output pad */
+		port@2 {
+			reg = <2>;
+
+			tvp5151_to_ipu1_csi0_mux: endpoint {
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	tsens0: temperature-sensor@70 {
+		compatible = "ti,tmp103";
+		reg = <0x70>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	gpio_pca: gpio@74 {
+		compatible = "nxp,pca9539";
+		reg = <0x74>;
+		interrupts-extended = <&gpio4 5 IRQ_TYPE_LEVEL_LOW>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+};
+
+&ipu1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
+	status = "okay";
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display_in>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&tvp5151_to_ipu1_csi0_mux>;
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1		0x030b0
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_can1phy: can1phygrp {
+		fsl,pins = <
+			/* CAN1_SR */
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x13070
+			/* CAN1_TERM */
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
+		>;
+	};
+
+	pinctrl_codec: codecgrp {
+		fsl,pins = <
+			/* AUDIO_nRESET */
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x1f0b0
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO		0x100b1
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK		0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI		0x100b1
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x000b1
+		>;
+	};
+
+	pinctrl_ipu1_csi0: ipu1csi0grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19	0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0
+			/* ITU656_nRESET */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+			/* ITU656_nPDN */
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x1b0b0
+		>;
+	};
+
+	pinctrl_ipu1_disp: ipudisp1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0xb0
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15	   0xb0
+
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0xb0
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0xb0
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0xb0
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0xb0
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0xb0
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0xb0
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0xb0
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0xb0
+
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0xb0
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0xb0
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0xb0
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0xb0
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0xb0
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0xb0
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0xb0
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0xb0
+
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0xb0
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0xb0
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0xb0
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0xb0
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0xb0
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0xb0
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0xb0
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0xb0
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b0
+		>;
+	};
+
+	pinctrl_reg_bl_12v0: 12blgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x1b0b0
+		>;
+	};
+
+	pinctrl_tsc: tscgrp {
+
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x1b0b0
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-qmx6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-qmx6.dtsi
new file mode 100644
index 000000000000..d5baec5e7a78
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-qmx6.dtsi
@@ -0,0 +1,611 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Device Tree Source for i.MX6DL based congatec QMX6
+// System on Module
+//
+// Copyright 2018-2021 General Electric Company
+// Copyright 2018-2021 Collabora
+// Copyright 2016 congatec AG
+
+#include "imx6dl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	memory@10000000 {
+		reg = <0x10000000 0x40000000>;
+		device_type = "memory";
+	};
+
+	reg_3p3v: 3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		mux-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>;
+		i2c-parent = <&i2c2>;
+
+		i2c5: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c6: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+
+	mux-ssi1 {
+		fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_TFSDIR |
+			IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT6) |
+			IMX_AUDMUX_V2_PTCR_TCLKDIR |
+			IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT6) |
+			IMX_AUDMUX_V2_PTCR_SYN)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT6)
+		>;
+	};
+
+	mux-aud6 {
+		fsl,audmux-port = <MX51_AUDMUX_PORT6>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT1_SSI0)
+		>;
+	};
+};
+
+&clks {
+	clocks = <&rtc_sqw>;
+	clock-names = "ckil";
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL2_PFD0_352M>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD0_352M>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "sst,sst25vf032b", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+
+		partition@0 {
+			label = "bootloader";
+			reg = <0x0000000 0x100000>;
+		};
+
+		partition@100000 {
+			label = "user";
+			reg = <0x0100000 0x2fc000>;
+		};
+
+		partition@3fc000 {
+			label = "reserved";
+			reg = <0x03fc000 0x4000>;
+			read-only;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet &pinctrl_phy_reset>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+	fsl,magic-packet;
+	phy-handle = <&phy0>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@6 {
+			reg = <6>;
+			qca,clk-out-frequency = <125000000>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	rtc: rtc@68 {
+		compatible = "st,m41t62";
+		reg = <0x68>;
+
+		rtc_sqw: clock {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+};
+
+&i2c6 {
+	pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/*
+			 * keep VGEN3, VGEN4 and VGEN5 enabled in order to
+			 * maintain backward compatibility with hw-rev. A.0
+			 */
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			/* supply voltage for eMMC */
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&pcie {
+	reset-gpio = <&gpio1 20 0>;
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+};
+
+&reg_arm {
+	vin-supply = <&sw1a_reg>;
+};
+
+&reg_pu {
+	vin-supply = <&sw1c_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&sw1c_reg>;
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbh1 {
+	/* Connected to USB-Hub SMSC USB2514, provides P0, P2, P3, P4 on Qseven connector */
+	vbus-supply = <&reg_5v>;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+};
+
+&usdhc2 {
+	/* MicroSD card slot */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc3 {
+	/* eMMC module */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	non-removable;
+	bus-width = <8>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_PIN2__AUD6_TXD		0x110b0 /* Q7[67] HDA_SDO */
+			MX6QDL_PAD_DI0_PIN3__AUD6_TXFS		0x30b0 /* Q7[59] HDA_SYNC */
+			MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x30b0 /* Q7[65] HDA_SDI */
+			MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x30b0 /* Q7[63] HDA_BITCLK */
+		>;
+	};
+
+	/* PHY is on System on Module, Q7[3-15] have Ethernet lines */
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000 /* PCIE_WAKE_B */
+			MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09	0x80000000 /* I2C multiplexer */
+			MX6QDL_PAD_NANDF_D6__GPIO2_IO06		0x80000000 /* SD4_CD# */
+			MX6QDL_PAD_NANDF_D7__GPIO2_IO07		0x80000000 /* SD4_WP */
+			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1		0x80000000 /* Camera MCLK */
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1 /* Q7[66] I2C_CLK */
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1 /* Q7[68] I2C_DAT */
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x1b0b0 /* Q7[66] I2C_CLK */
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x1b0b0 /* Q7[68] I2C_DAT */
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1 /* Q7[152] SDVO_CTRL_CLK */
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1 /* Q7[150] SDVO_CTRL_DAT */
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2-gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x1b0b0 /* Q7[152] SDVO_CTRL_CLK */
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x1b0b0 /* Q7[150] SDVO_CTRL_DAT */
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1 /* Q7[60] SMB_CLK */
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1 /* Q7[62] SMB_DAT */
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3-gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__GPIO1_IO03		0x1b0b0 /* Q7[60] SMB_CLK */
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06		0x1b0b0 /* Q7[62] SMB_DAT */
+		>;
+	};
+
+	pinctrl_phy_reset: phy-resetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x1b0b0 /* RGMII Phy Reset */
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1 /* Q7[123] LVDS_BLT_CTRL */
+		>;
+	};
+
+	pinctrl_q7_backlight_enable: q7-backlight-enablegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x1b0b0 /* Q7[112] LVDS_BLEN */
+		>;
+	};
+
+	pinctrl_q7_gpio0: q7-gpio0grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b0 /* Q7[185] GPIO0 */
+		>;
+	};
+
+	pinctrl_q7_gpio1: q7-gpio1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x1b0b0 /* Q7[186] GPIO1 */
+		>;
+	};
+
+	pinctrl_q7_gpio2: q7-gpio2grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26	0x1b0b0 /* Q7[187] GPIO2 */
+		>;
+	};
+
+	pinctrl_q7_gpio3: q7-gpio3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27	0x1b0b0 /* Q7[188] GPIO3 */
+		>;
+	};
+
+	pinctrl_q7_gpio4: q7-gpio4grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0 /* Q7[189] GPIO4 */
+		>;
+	};
+
+	pinctrl_q7_gpio5: q7-gpio5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0 /* Q7[190] GPIO5 */
+		>;
+	};
+
+	pinctrl_q7_gpio6: q7-gpio6grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_16__GPIO7_IO11		0x1b0b0 /* Q7[191] GPIO6 */
+		>;
+	};
+
+	pinctrl_q7_gpio7: q7-gpio7grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0 /* Q7[192] GPIO7 */
+		>;
+	};
+
+	pinctrl_q7_hda_reset: q7-hda-resetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x1b0b0 /* Q7[61] HDA_RST_N */
+		>;
+	};
+
+	pinctrl_q7_lcd_power: lcd-powergrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x1b0b0 /* Q7[111] LVDS_PPEN */
+		>;
+	};
+
+	pinctrl_q7_sdio_power: q7-sdio-powergrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30	0x1b0b0 /* Q7[47] SDIO_PWR# */
+		>;
+	};
+
+	pinctrl_q7_sleep_button: q7-sleep-buttongrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0 /* Q7[21] SLP_BTN# */
+		>;
+	};
+
+	pinctrl_q7_spi_cs1: spi-cs1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25	0x1b0b0 /* Q7[202] SPI_CS1# */
+		>;
+	};
+
+	/* SPI1 bus does not leave System on Module */
+	pinctrl_spi1: spi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x1b0b0
+		>;
+	};
+
+	/* Debug connector on Q7 module */
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1 /* Q7[177] UART0_RX */
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1 /* Q7[171] UART0_TX */
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059 /* Q7[92] USB_ID */
+		>;
+	};
+
+	/* µSD card slot on Q7 module */
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0 /* SD2_CD */
+		>;
+	};
+
+	/* eMMC module on Q7 module */
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059 /* Q7[45] SDIO_CMD */
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x17059 /* Q7[42] SDIO_CLK */
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059 /* Q7[48] SDIO_DAT1 */
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059 /* Q7[49] SDIO_DAT0 */
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059 /* Q7[50] SDIO_DAT3 */
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059 /* Q7[51] SDIO_DAT2 */
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0 /* Watchdog output signal */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-rex-basic.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-rex-basic.dts
index 0f1616bfa9a8..b72f8ea1e6f6 100644
--- a/arch/arm/boot/dts/imx6dl-rex-basic.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-rex-basic.dts
@@ -19,7 +19,7 @@
 };
 
 &ecspi3 {
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "sst,sst25vf016b", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-riotboard.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-riotboard.dts
new file mode 100644
index 000000000000..55b7e91d2ac0
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-riotboard.dts
@@ -0,0 +1,594 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2014 Iain Paton <ipaton0@gmail.com>
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "RIoTboard i.MX6S";
+	compatible = "riot,imx6s-riotboard", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		led0: led-user1 {
+			label = "user1";
+			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: led-user2 {
+			label = "user2";
+			gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx6-riotboard-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+			mux-int-port = <1>;
+			mux-ext-port = <3>;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usb_otg_vbus: regulator-usbotgvbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&clks {
+	fsl,pmic-stby-poweroff;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&rgmii_phy>;
+	/delete-property/ interrupts;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Atheros AR8035 PHY */
+		rgmii_phy: ethernet-phy@4 {
+			reg = <4>;
+			interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <1000>;
+			qca,smarteee-tw-us-1g = <24>;
+			qca,clk-out-frequency = <125000000>;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "SD2_WP", "", "SD2_CD", "I2C3_SCL",
+			"I2C3_SDA", "I2C4_SCL",
+		"I2C4_SDA", "", "", "", "", "", "", "",
+		"", "PWM3", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "USB_OTG_VBUS", "",
+		"UART3_TXD", "UART3_RXD", "", "", "EIM_D28", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "", "", "", "UART4_TXD", "UART4_RXD",
+		"UART5_TXD", "UART5_RXD", "", "", "", "", "", "",
+		"GPIO4_16", "GPIO4_17", "GPIO4_18", "GPIO4_19", "",
+			"CSPI3_CLK", "CSPI3_MOSI", "CSPI3_MISO",
+		"CSPI3_CS0", "CSPI3_CS1", "GPIO4_26", "GPIO4_27",
+			"CSPI3_RDY", "PWM1", "PWM2", "GPIO4_31";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "EIM_A25", "", "", "GPIO5_05", "GPIO5_06",
+			"GPIO5_07",
+		"GPIO5_08", "CSPI2_CS1", "CSPI2_MOSI", "CSPI2_MISO",
+			"CSPI2_CS0", "CSPI2_CLK", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio7 {
+	gpio-line-names =
+		"SD3_CD", "SD3_WP", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <16 8>;
+		fsl,pmic-stby-poweroff;
+
+		regulators {
+			reg_vddcore: sw1ab {				/* VDDARM_IN */
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+			};
+
+			reg_vddsoc: sw1c {				/* VDDSOC_IN */
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+			};
+
+			reg_gen_3v3: sw2 {				/* VDDHIGH_IN */
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			reg_ddr_1v5a: sw3a {				/* NVCC_DRAM, NVCC_RGMII */
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-always-on;
+			};
+
+			reg_ddr_1v5b: sw3b {				/* NVCC_DRAM, NVCC_RGMII */
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-always-on;
+			};
+
+			reg_ddr_vtt: sw4 {				/* MIPI conn */
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-always-on;
+			};
+
+			reg_5v_600mA: swbst {				/* not used */
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			reg_snvs_3v: vsnvs {				/* VDD_SNVS_IN */
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {				/* VREF_DDR */
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vgen1_1v5: vgen1 {				/* not used */
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			reg_vgen2_1v2_eth: vgen2 {			/* pcie ? */
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			reg_vgen3_2v8: vgen3 {				/* not used */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+			reg_vgen4_1v8: vgen4 {				/* NVCC_SD3 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			reg_vgen5_2v5_sgtl: vgen5 {			/* Pwr LED & 5V0_delayed enable */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			reg_vgen6_3v3: vgen6 {				/* #V#_DELAYED enable, MIPI */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	clocks = <&clks 116>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbh1 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	vmmc-supply = <&reg_3p3v>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0		/* CAM_MCLK */
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x000b1		/* CS0 */
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09	0x000b1		/* CS1 */
+			MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x000b1		/* CS0 */
+			MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK	0x100b1
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x000b1		/* CS0 */
+			MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25	0x000b1		/* CS1 */
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x0a0b1		/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030		/* AR8035 pin strapping: IO voltage: pull up */
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030		/* AR8035 pin strapping: PHYADDR#0: pull down */
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030		/* AR8035 pin strapping: PHYADDR#1: pull down */
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030		/* AR8035 pin strapping: MODE#1: pull up */
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030		/* AR8035 pin strapping: MODE#3: pull up */
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x130b0		/* AR8035 pin strapping: MODE#0: pull down */
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8	/* GPIO16 -> AR8035 25MHz */
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x130b0		/* RGMII_nRST */
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x180b0		/* AR8035 interrupt */
+			MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__I2C4_SCL             0x4001b8b1
+			MX6QDL_PAD_GPIO_8__I2C4_SDA             0x4001b8b1
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b1	/* user led0 */
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x1b0b1	/* user led1 */
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT9__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x000b0	/* MX6QDL_PAD_EIM_D22__USB_OTG_PWR */
+			MX6QDL_PAD_EIM_D21__USB_OTG_OC		0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0	/* SD2 CD */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1f0b0	/* SD2 WP */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0	/* SD3 CD */
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1f0b0	/* SD3 WP */
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+			MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x17059	/* SD4 RST (eMMC) */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-sabreauto.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-sabreauto.dts
index ff3283c83a39..ff3283c83a39 100644
--- a/arch/arm/boot/dts/imx6dl-sabreauto.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-sabreauto.dts
diff --git a/arch/arm/boot/dts/imx6dl-sabrelite.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-sabrelite.dts
index 33040761b253..33040761b253 100644
--- a/arch/arm/boot/dts/imx6dl-sabrelite.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-sabrelite.dts
diff --git a/arch/arm/boot/dts/imx6dl-sabresd.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-sabresd.dts
index cd6bbf22a16f..cd6bbf22a16f 100644
--- a/arch/arm/boot/dts/imx6dl-sabresd.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-sabresd.dts
diff --git a/arch/arm/boot/dts/imx6dl-savageboard.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-savageboard.dts
index b95469c520a4..b95469c520a4 100644
--- a/arch/arm/boot/dts/imx6dl-savageboard.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-savageboard.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-sielaff.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-sielaff.dts
new file mode 100644
index 000000000000..7de8d5f26518
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-sielaff.dts
@@ -0,0 +1,533 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2022 Kontron Electronics GmbH
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include <dt-bindings/clock/imx6qdl-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Sielaff i.MX6 Solo";
+	compatible = "sielaff,imx6dl-board", "fsl,imx6dl";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	backlight: pwm-backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		pwms = <&pwm3 0 50000 0>;
+		brightness-levels = <0 0 64 88 112 136 184 232 255>;
+		default-brightness-level = <4>;
+		enable-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_backlight>;
+	};
+
+	cec {
+		compatible = "cec-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hdmi_cec>;
+		cec-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+		hdmi-phandle = <&hdmi>;
+	};
+
+	enet_ref: clock-enet-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "enet-ref";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-0 {
+			gpios = <&gpio2 16 0>;
+			debounce-interval = <10>;
+			linux,code = <1>;
+		};
+
+		key-1 {
+			gpios = <&gpio3 27 0>;
+			debounce-interval = <10>;
+			linux,code = <2>;
+		};
+
+		key-2 {
+			gpios = <&gpio5 4 0>;
+			debounce-interval = <10>;
+			linux,code = <3>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-debug {
+			label = "debug-led";
+			gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+		device_type = "memory";
+	};
+
+	osc_eth_phy: clock-osc-eth-phy {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+		clock-output-names = "osc-eth-phy";
+	};
+
+	panel {
+		compatible = "lg,lb070wv8";
+		backlight = <&backlight>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in_lvds: endpoint {
+				remote-endpoint = <&lvds_out>;
+			};
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_backlight: regulator-backlight {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_backlight>;
+		enable-active-high;
+		gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+		regulator-name = "backlight";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usbotg_vbus>;
+		enable-active-high;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&fec {
+	/*
+	 * Set PTP clock to external instead of internal reference, as the
+	 * REF_CLK from the PHY is fed back into the i.MX6 and the GPR
+	 * register needs to be set accordingly (see mach-imx6q.c).
+	 */
+	clocks = <&clks IMX6QDL_CLK_ENET>,
+		 <&clks IMX6QDL_CLK_ENET>,
+		 <&enet_ref>,
+		 <&clks IMX6QDL_CLK_ENET_REF>;
+	clock-names = "ipg", "ahb", "ptp", "enet_out";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-connection-type = "rmii";
+	phy-handle = <&ethphy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@1 {
+			reg = <1>;
+			clocks = <&osc_eth_phy>;
+			clock-names = "rmii-ref";
+			micrel,led-mode = <1>;
+			reset-assert-us = <500>;
+			reset-deassert-us = <100>;
+			reset-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "key-out", "key-in",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"lan9500a-rst", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c4>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	touchscreen@55 {
+		compatible = "sitronix,st1633";
+		reg = <0x55>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch>;
+		interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-parent = <&gpio5>;
+		gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		status = "disabled";
+	};
+
+	touchscreen@5d {
+		compatible = "goodix,gt928";
+		reg = <0x5d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch>;
+		interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio5>;
+		irq-gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&ldb {
+	status = "okay";
+
+	lvds: lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds_out: endpoint {
+				remote-endpoint = <&panel_in_lvds>;
+			};
+		};
+	};
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	disable-over-current;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	usb1@1 {
+		compatible = "usb4b4,6570";
+		reg = <1>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+
+		assigned-clocks = <&clks IMX6QDL_CLK_CKO>,
+				  <&clks IMX6QDL_CLK_CKO2_SEL>;
+		assigned-clock-parents = <&clks IMX6QDL_CLK_CKO2>,
+					 <&clks IMX6QDL_CLK_OSC>;
+		assigned-clock-rates = <12000000 0>;
+	};
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "host";
+	over-current-active-low;
+	vbus-supply = <&reg_usb_otg_vbus>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3v3>;
+	voltage-ranges = <3300 3300>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RD0__GPIO6_IO25	0x1b0b0	/* PMIC_IRQ */
+			MX6QDL_PAD_SD2_DAT3__GPIO1_IO12		0x1b0b0
+			MX6QDL_PAD_SD2_DAT1__GPIO1_IO14		0x1b0b0
+			MX6QDL_PAD_SD2_DAT0__GPIO1_IO15		0x1b0b0
+			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08		0x1b0b0
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x1b0b0
+		>;
+	};
+
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x100b1
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO	0x100b1
+			MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI	0x100b1
+			MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK	0x100b1
+			MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29	0x100b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x100b1
+		>;
+	};
+
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A22__GPIO2_IO16		0x1b080
+			MX6QDL_PAD_EIM_D27__GPIO3_IO27		0x1b080
+			MX6QDL_PAD_EIM_A24__GPIO5_IO04		0x1b080
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_hdmi_cec: hdmicecgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A21__GPIO2_IO17		0x1b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001f8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__I2C4_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_8__I2C4_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_reg_backlight: regbacklightgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23	0x1b0b1
+		>;
+	};
+
+	pinctrl_reg_usbotg_vbus: regusbotgvbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b1
+		>;
+	};
+
+	pinctrl_touch: touchgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b0
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b0
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__USB_H1_OC		0x1b0b1
+			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1		0x1b0b0
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x100b1
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-skov-revc-lt2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-skov-revc-lt2.dts
index 667b8faa1807..b12b5aabe70a 100644
--- a/arch/arm/boot/dts/imx6dl-skov-revc-lt2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-skov-revc-lt2.dts
@@ -6,6 +6,7 @@
 #include "imx6dl.dtsi"
 #include "imx6qdl-skov-cpu.dtsi"
 #include "imx6qdl-skov-cpu-revc.dtsi"
+#include "imx6qdl-skov-revc-lt2.dtsi"
 
 / {
 	model = "SKOV IMX6 CPU SoloCore";
diff --git a/arch/arm/boot/dts/imx6dl-skov-revc-lt6.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-skov-revc-lt6.dts
index 5dcc433fe2af..5dcc433fe2af 100644
--- a/arch/arm/boot/dts/imx6dl-skov-revc-lt6.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-skov-revc-lt6.dts
diff --git a/arch/arm/boot/dts/imx6dl-solidsense.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-solidsense.dts
index 2a3699adbed0..2a3699adbed0 100644
--- a/arch/arm/boot/dts/imx6dl-solidsense.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-solidsense.dts
diff --git a/arch/arm/boot/dts/imx6dl-tqma6a.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-tqma6a.dtsi
index e891ef9b0091..e891ef9b0091 100644
--- a/arch/arm/boot/dts/imx6dl-tqma6a.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tqma6a.dtsi
diff --git a/arch/arm/boot/dts/imx6dl-tqma6b.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-tqma6b.dtsi
index 38cd8501a886..38cd8501a886 100644
--- a/arch/arm/boot/dts/imx6dl-tqma6b.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tqma6b.dtsi
diff --git a/arch/arm/boot/dts/imx6dl-ts4900.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-ts4900.dts
index 3d60cc725d9e..3d60cc725d9e 100644
--- a/arch/arm/boot/dts/imx6dl-ts4900.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-ts4900.dts
diff --git a/arch/arm/boot/dts/imx6dl-ts7970.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-ts7970.dts
index 5da6feba2e66..5da6feba2e66 100644
--- a/arch/arm/boot/dts/imx6dl-ts7970.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-ts7970.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6dl-comtft.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6dl-comtft.dts
new file mode 100644
index 000000000000..136ae7841878
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6dl-comtft.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6DL Module on CoMpact TFT";
+	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
+};
+
+&backlight {
+	pwms = <&pwm2 0 500000 0>;
+};
+
+&can1 {
+	status = "disabled";
+};
+
+&can2 {
+	xceiver-supply = <&reg_3v3>;
+};
+
+&kpp {
+	status = "disabled";
+};
+
+&lcd_panel {
+	compatible = "edt,etm0700g0edh6";
+};
+
+&reg_can_xcvr {
+	status = "disabled";
+};
+
+&touchscreen {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8034-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8034-mb7.dts
new file mode 100644
index 000000000000..e1b525ed292a
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8034-mb7.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6dl-tx6s-8034.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6S-8034 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8034.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8034.dts
new file mode 100644
index 000000000000..9a6a5cda9a3b
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8034.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2015-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6S-8034 Module";
+	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
+
+	cpus {
+		/delete-node/ cpu@1;
+	};
+};
+
+&ds1339 {
+	status = "disabled";
+};
+
+&pinctrl_usdhc1 {
+	fsl,pins = <
+		MX6QDL_PAD_SD1_CMD__SD1_CMD		0x070b1
+		MX6QDL_PAD_SD1_CLK__SD1_CLK		0x070b1
+		MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x070b1
+		MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x070b1
+		MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x070b1
+		MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x070b1
+		MX6QDL_PAD_SD3_CMD__GPIO7_IO02		0x170b0 /* SD1 CD */
+	>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8035-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8035-mb7.dts
new file mode 100644
index 000000000000..0e8f4c3f3760
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8035-mb7.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6dl-tx6s-8035.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6U-8035 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8035.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8035.dts
new file mode 100644
index 000000000000..9958e8701c98
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6s-8035.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2015-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6S-8035 Module";
+	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
+
+	cpus {
+		/delete-node/ cpu@1;
+	};
+};
+
+&ds1339 {
+	status = "disabled";
+};
+
+&gpmi {
+	status = "disabled";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	non-removable;
+	no-1-8-v;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
+			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-801x.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-801x.dts
new file mode 100644
index 000000000000..d9bfd340efb2
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-801x.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6U-801x Module";
+	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-8033-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-8033-mb7.dts
new file mode 100644
index 000000000000..8243f0d6d387
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-8033-mb7.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6dl-tx6u-8033.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6U-8033 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-8033.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-8033.dts
new file mode 100644
index 000000000000..2d031403ab19
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-8033.dts
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6U-8033 Module";
+	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
+};
+
+&ds1339 {
+	status = "disabled";
+};
+
+&gpmi {
+	status = "disabled";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	non-removable;
+	no-1-8-v;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
+			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-80xx-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-80xx-mb7.dts
new file mode 100644
index 000000000000..684a2583db75
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-80xx-mb7.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6dl-tx6u-801x.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6U-8030/-8010/-8012 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-811x.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-811x.dts
new file mode 100644
index 000000000000..7fdc794615f2
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-811x.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lvds.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6U-811x Module";
+	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-81xx-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-81xx-mb7.dts
new file mode 100644
index 000000000000..209aaebe148a
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-tx6u-81xx-mb7.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2016-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6dl-tx6u-811x.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6U-8130/-8110 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/imx6dl-udoo.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-udoo.dts
index d871cac1711f..d871cac1711f 100644
--- a/arch/arm/boot/dts/imx6dl-udoo.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-udoo.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-victgo.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-victgo.dts
new file mode 100644
index 000000000000..76b0007d20ad
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-victgo.dts
@@ -0,0 +1,360 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2016 Protonic Holland
+ * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-vicut1.dtsi"
+
+/ {
+	model = "Kverneland TGO";
+	compatible = "kvg,victgo", "fsl,imx6dl";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiokeys>;
+		autorepeat;
+
+		key-power {
+			label = "Power Button";
+			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		key-enter {
+			label = "Rotary Key";
+			gpios = <&gpio2 05 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_ENTER>;
+			wakeup-source;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&vdiv_vaccu 0>, <&vdiv_hitch_pos 0>;
+	};
+
+	panel {
+		compatible = "lg,lb070wv8";
+		backlight = <&backlight_lcd>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	clk50m_phy: phy-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
+	};
+
+	rotary-encoder {
+		compatible = "rotary-encoder";
+		pinctrl-0 = <&pinctrl_rotary_ch>;
+		gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>,
+			<&gpio2 4 GPIO_ACTIVE_HIGH>;
+		linux,axis = <REL_WHEEL>;
+		rotary-encoder,steps-per-period = <4>;
+		rotary-encoder,relative-axis;
+		rotary-encoder,rollover;
+		wakeup-source;
+	};
+
+	thermal-zones {
+		chassis-thermal {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&tsens0>;
+
+			trips {
+				alert {
+					temperature = <105000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
+		};
+
+		touch-0-thermal {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&touch_temp0>;
+
+			trips {
+				alert {
+					temperature = <105000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
+		};
+
+		touch-1-thermal {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&touch_temp1>;
+
+			trips {
+				alert {
+					temperature = <105000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
+		};
+	};
+
+	touchscreen {
+		compatible = "resistive-adc-touch";
+		io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>,
+                              <&adc_ts 5>;
+		io-channel-names = "y", "z1", "z2", "x";
+		touchscreen-min-pressure = <64687>;
+		touchscreen-inverted-y;
+		touchscreen-x-plate-ohms = <300>;
+		touchscreen-y-plate-ohms = <800>;
+	};
+
+	touch_temp0: touch-temperature-sensor0 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&adc_ts 0>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-40000) 736
+						85000 474>;
+	};
+
+	touch_temp1: touch-temperature-sensor1 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&adc_ts 7>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-40000) 826
+						85000 609>;
+	};
+
+	vdiv_vaccu: voltage-divider-vaccu {
+		compatible = "voltage-divider";
+		io-channels = <&adc_ts 2>;
+		output-ohms = <2500>;
+		full-ohms = <64000>;
+		#io-channel-cells = <1>;
+	};
+
+	vdiv_hitch_pos: voltage-divider-hitch-pos {
+		compatible = "voltage-divider";
+		io-channels = <&adc_ts 6>;
+		output-ohms = <3300>;
+		full-ohms = <13300>;
+		#io-channel-cells = <1>;
+	};
+};
+
+&clks {
+	clocks = <&clk50m_phy>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clk50m_phy>;
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+
+	adc_ts: adc@0 {
+		compatible = "ti,tsc2046e-adc";
+		reg = <0>;
+		pinctrl-0 = <&pinctrl_touchscreen>;
+		pinctrl-names = "default";
+		spi-max-frequency = <1000000>;
+		interrupts-extended = <&gpio5 8 IRQ_TYPE_LEVEL_LOW>;
+		#io-channel-cells = <1>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@1 {
+			reg = <1>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@3 {
+			reg = <3>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@4 {
+			reg = <4>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@5 {
+			reg = <5>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rmii";
+	phy-handle = <&rmii_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Microchip KSZ8081RNA PHY */
+		rmii_phy: ethernet-phy@0 {
+			reg = <0>;
+			interrupts-extended = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <300>;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR",
+			"CAM2_MIRROR", "", "", "SMBALERT",
+		"DEBUG_0", "DEBUG_1", "", "", "", "", "", "",
+		"SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK",
+			"SD1_DATA3", "ETH_MDIO", "",
+		"", "", "", "", "", "", "", "ETH_MDC";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "", "", "", "UART4_TXD", "UART4_RXD",
+		"UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR",
+			"CAN2_SR", "CAN2_TX", "CAN2_RX",
+		"", "", "DIP1_FB", "", "VCAM_EN", "ON1_CTRL", "ON2_CTRL",
+			"HITCH_IN_OUT",
+		"LIGHT_ON", "", "ETH_RESET", "CONTACT_IN", "BL_EN",
+			"BL_PWM", "ETH_INT", "ISB_LED";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"TSC_PENIRQ", "TSC_BUSY", "ECSPI2_MOSI", "ECSPI2_MISO",
+			"ECSPI2_SS0", "ECSPI2_SCLK", "", "",
+		"", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET",
+			"I2S_BITCLK", "I2S_DOUT",
+		"I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX",
+			"YACO_AUX_TX", "ITU656_D0", "ITU656_D1";
+};
+
+&gpio6 {
+	gpio-line-names =
+		"ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5",
+			"ITU656_D6", "ITU656_D7", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&i2c1 {
+	keypad@70 {
+		compatible = "holtek,ht16k33";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_keypad>;
+		reg = <0x70>;
+		refresh-rate-hz = <20>;
+		debounce-delay-ms = <50>;
+		interrupts-extended = <&gpio4 5 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
+		keypad,num-rows = <12>;
+		keypad,num-columns = <3>;
+		linux,keymap = <
+			MATRIX_KEY(2, 0, KEY_F6)
+			MATRIX_KEY(3, 0, KEY_F8)
+			MATRIX_KEY(4, 0, KEY_F10)
+			MATRIX_KEY(5, 0, KEY_F4)
+			MATRIX_KEY(6, 0, KEY_F2)
+			MATRIX_KEY(2, 1, KEY_F5)
+			MATRIX_KEY(3, 1, KEY_F7)
+			MATRIX_KEY(4, 1, KEY_F9)
+			MATRIX_KEY(5, 1, KEY_F3)
+			MATRIX_KEY(6, 1, KEY_F1)
+		      >;
+	};
+};
+
+&iomuxc {
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI		0x100b1
+			MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO		0x100b1
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12		0x100b1
+			MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK		0x100b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			/* MX6QDL_ENET_PINGRP4 */
+			MX6QDL_PAD_ENET_MDC__ENET_MDC			0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO			0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0		0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1		0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER		0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN		0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0		0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1		0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK		0x1b0b0
+			/* Phy reset */
+			MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26		0x1b0b0
+			/* nINTRP */
+			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpiokeys: gpiokeygrp {
+		fsl,pins = <
+			/* ROTARY_BTN */
+			MX6QDL_PAD_NANDF_D5__GPIO2_IO05			0x1b0b0
+			/* nON_SWITCH */
+			MX6QDL_PAD_EIM_CS0__GPIO2_IO23			0x1b0b0
+		>;
+	};
+
+	pinctrl_keypad: keypadgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05			0x1b0b0
+		>;
+	};
+
+	pinctrl_rotary_ch: rotarychgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03			0x1b0b0
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04			0x1b0b0
+		>;
+	};
+
+	pinctrl_touchscreen: touchscreengrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08		0x1b0b0
+			MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-vicut1.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-vicut1.dts
index 174fd913bf96..5035d303447d 100644
--- a/arch/arm/boot/dts/imx6dl-vicut1.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-vicut1.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 #include "imx6dl.dtsi"
 #include "imx6qdl-vicut1.dtsi"
+#include "imx6qdl-vicut1-12inch.dtsi"
 
 / {
 	model = "Kverneland UT1 Board";
diff --git a/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-wandboard-revb1.dts
index c2946fbaa0dd..c2946fbaa0dd 100644
--- a/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-wandboard-revb1.dts
diff --git a/arch/arm/boot/dts/imx6dl-wandboard-revd1.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-wandboard-revd1.dts
index 6d1d863c2e3a..6d1d863c2e3a 100644
--- a/arch/arm/boot/dts/imx6dl-wandboard-revd1.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-wandboard-revd1.dts
diff --git a/arch/arm/boot/dts/imx6dl-wandboard.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-wandboard.dts
index 4a08d5a99452..4a08d5a99452 100644
--- a/arch/arm/boot/dts/imx6dl-wandboard.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-wandboard.dts
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi
index e5c4dc65fbab..4a5736526927 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi
@@ -55,6 +55,7 @@
 	panel: panel {
 		compatible = "dataimage,scf0700c48ggu18";
 		power-supply = <&sw2_reg>;
+		backlight = <&backlight>;
 		status = "disabled";
 
 		port {
@@ -97,7 +98,6 @@
 		regulator-max-microvolt = <5000000>;
 		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
-		status = "okay";
 	};
 };
 
@@ -105,8 +105,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <20>;
 	phy-supply = <&sw2_reg>;
 	status = "okay";
 
@@ -119,17 +117,10 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		phy_port2: phy@1 {
-			reg = <1>;
-		};
-
-		phy_port3: phy@2 {
-			reg = <2>;
-		};
-
 		switch@10 {
 			compatible = "qca,qca8334";
-			reg = <10>;
+			reg = <0x10>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
 
 			switch_ports: ports {
 				#address-cells = <1>;
@@ -150,15 +141,30 @@
 				eth2: port@2 {
 					reg = <2>;
 					label = "eth2";
+					phy-mode = "internal";
 					phy-handle = <&phy_port2>;
 				};
 
 				eth1: port@3 {
 					reg = <3>;
 					label = "eth1";
+					phy-mode = "internal";
 					phy-handle = <&phy_port3>;
 				};
 			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy_port2: ethernet-phy@1 {
+					reg = <1>;
+				};
+
+				phy_port3: ethernet-phy@2 {
+					reg = <2>;
+				};
+			};
 		};
 	};
 };
@@ -269,40 +275,36 @@
 		compatible = "ti,lp5562";
 		reg = <0x30>;
 		clock-mode = /bits/ 8 <1>;
-		status = "disabled";
 		#address-cells = <1>;
 		#size-cells = <0>;
+		status = "disabled";
 
-		chan@0 {
-			chan-name = "R";
-			led-cur = /bits/ 8 <0x20>;
-			max-cur = /bits/ 8 <0x60>;
-			reg = <0>;
-			color = <LED_COLOR_ID_RED>;
-		};
-
-		chan@1 {
-			chan-name = "G";
-			led-cur = /bits/ 8 <0x20>;
-			max-cur = /bits/ 8 <0x60>;
-			reg = <1>;
-			color = <LED_COLOR_ID_GREEN>;
-		};
+		multi-led@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			color = <LED_COLOR_ID_RGB>;
+			function = LED_FUNCTION_INDICATOR;
+
+			led@0 {
+				led-cur = /bits/ 8 <0x20>;
+				max-cur = /bits/ 8 <0x60>;
+				reg = <0>;
+				color = <LED_COLOR_ID_RED>;
+			};
 
-		chan@2 {
-			chan-name = "B";
-			led-cur = /bits/ 8 <0x20>;
-			max-cur = /bits/ 8 <0x60>;
-			reg = <2>;
-			color = <LED_COLOR_ID_BLUE>;
-		};
+			led@1 {
+				led-cur = /bits/ 8 <0x20>;
+				max-cur = /bits/ 8 <0x60>;
+				reg = <1>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
 
-		chan@3 {
-			chan-name = "W";
-			led-cur = /bits/ 8 <0x0>;
-			max-cur = /bits/ 8 <0x0>;
-			reg = <3>;
-			color = <LED_COLOR_ID_WHITE>;
+			led@2 {
+				led-cur = /bits/ 8 <0x20>;
+				max-cur = /bits/ 8 <0x60>;
+				reg = <2>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
 		};
 	};
 
@@ -310,7 +312,6 @@
 		compatible = "atmel,24c128";
 		reg = <0x57>;
 		pagesize = <64>;
-		status = "okay";
 	};
 
 	touchscreen: touchscreen@5c {
@@ -320,7 +321,7 @@
 		interrupt-parent = <&gpio4>;
 		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
 		attb-gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>;
-		reset-gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
 		touchscreen-size-x = <800>;
 		touchscreen-size-y = <480>;
 		status = "disabled";
@@ -509,7 +510,7 @@
 		>;
 	};
 
-	pinctrl_usbh1_vbus: usbh1-vbus {
+	pinctrl_usbh1_vbus: usbh1-vbusgrp {
 		fsl,pins = <
 			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x98
 		>;
@@ -522,7 +523,7 @@
 		>;
 	};
 
-	pinctrl_usbotg_vbus: usbotg-vbus {
+	pinctrl_usbotg_vbus: usbotg-vbusgrp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x98
 		>;
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-draco.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-draco.dts
index a38c407fd837..a38c407fd837 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-draco.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-draco.dts
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-hydra.dts
index a19609c7c7c0..a19609c7c7c0 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-hydra.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-lynx.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-lynx.dts
new file mode 100644
index 000000000000..0a6b668428a3
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-lynx.dts
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2021 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6dl-yapp43-common.dtsi"
+
+/ {
+	model = "Y Soft IOTA Lynx i.MX6DualLite board";
+	compatible = "ysoft,imx6dl-yapp4-lynx", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+};
+
+&backlight {
+	status = "okay";
+};
+
+&beeper {
+	status = "okay";
+};
+
+&lcd_display {
+	status = "okay";
+};
+
+&leds {
+	status = "okay";
+};
+
+&panel {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&reg_usb_h1_vbus {
+	status = "okay";
+};
+
+&touchscreen {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-orion.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-orion.dts
index 884b236746bb..884b236746bb 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-orion.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-orion.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-phoenix.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-phoenix.dts
new file mode 100644
index 000000000000..e0292f11d03e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-phoenix.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2021 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6dl-yapp43-common.dtsi"
+
+/ {
+	model = "Y Soft IOTA Phoenix i.MX6DualLite board";
+	compatible = "ysoft,imx6dl-yapp4-phoenix", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+};
+
+&aliases {
+	/delete-property/ ethernet1;
+};
+
+&gpio_keys {
+	status = "okay";
+};
+
+&reg_usb_h1_vbus {
+	status = "okay";
+};
+
+&switch_ports {
+	/delete-node/ port@2;
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-ursa.dts
index f6ae24efd4aa..f6ae24efd4aa 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-ursa.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp43-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp43-common.dtsi
new file mode 100644
index 000000000000..6e49e1ccf6fc
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp43-common.dtsi
@@ -0,0 +1,638 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2021 Y Soft Corporation, a.s.
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	aliases: aliases {
+		ethernet1 = &eth1;
+		ethernet2 = &eth2;
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc4;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 32 64 128 255>;
+		default-brightness-level = <32>;
+		num-interpolated-steps = <8>;
+		power-supply = <&sw2_reg>;
+		status = "disabled";
+	};
+
+	beeper: beeper {
+		compatible = "pwm-beeper";
+		pwms = <&pwm3 0 500000 0>;
+		status = "disabled";
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+		status = "disabled";
+
+		button {
+			label = "Factory RESET";
+			linux,code = <BTN_0>;
+			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	lcd_display: display {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1>;
+		status = "disabled";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel: panel {
+		compatible = "dataimage,scf0700c48ggu18";
+		power-supply = <&sw2_reg>;
+		backlight = <&backlight>;
+		enable-gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1_vbus>;
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		status = "disabled";
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg_vbus>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&sw2_reg>;
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch@0 {
+			compatible = "marvell,mv88e6085";
+			reg = <0>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+
+			switch_ports: ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ethphy0: port@0 {
+					reg = <0>;
+					label = "cpu";
+					phy-mode = "rgmii-id";
+					ethernet = <&fec>;
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+
+				eth2: port@1 {
+					reg = <1>;
+					label = "eth2";
+					phy-handle = <&phy_port1>;
+				};
+
+				eth1: port@2 {
+					reg = <2>;
+					label = "eth1";
+					phy-handle = <&phy_port2>;
+				};
+			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy_port1: switchphy@11 {
+					reg = <0x11>;
+				};
+
+				phy_port2: switchphy@12 {
+					reg = <0x12>;
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic@8 {
+		compatible = "fsl,pfuze200";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		reg = <0x8>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vsnvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	leds: led-controller@30 {
+		compatible = "ti,lp5562";
+		reg = <0x30>;
+		clock-mode = /bits/ 8 <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		multi-led@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			color = <LED_COLOR_ID_RGB>;
+			function = LED_FUNCTION_INDICATOR;
+
+			led@0 {
+				led-cur = /bits/ 8 <0x6e>;
+				max-cur = /bits/ 8 <0xc8>;
+				reg = <0>;
+				color = <LED_COLOR_ID_RED>;
+			};
+
+			led@1 {
+				led-cur = /bits/ 8 <0xbe>;
+				max-cur = /bits/ 8 <0xc8>;
+				reg = <1>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led@2 {
+				led-cur = /bits/ 8 <0xbe>;
+				max-cur = /bits/ 8 <0xc8>;
+				reg = <2>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+		};
+	};
+
+	eeprom@57 {
+		compatible = "atmel,24c128";
+		reg = <0x57>;
+		pagesize = <64>;
+	};
+
+	touchscreen: touchscreen@5c {
+		compatible = "pixcir,pixcir_tangoc";
+		reg = <0x5c>;
+		pinctrl-0 = <&pinctrl_touch>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+		attb-gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+		status = "disabled";
+	};
+
+	rtc: rtc@68 {
+		compatible = "dallas,ds1341";
+		reg = <0x68>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "disabled";
+
+	oled_1309: oled@3c {
+		compatible = "solomon,ssd1309fb-i2c";
+		reg = <0x3c>;
+		solomon,height = <64>;
+		solomon,width = <128>;
+		solomon,page-offset = <0>;
+		solomon,segment-no-remap;
+		solomon,prechargep2 = <15>;
+		reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>;
+		vbat-supply = <&sw2_reg>;
+		status = "disabled";
+	};
+
+	oled_1305: oled@3d {
+		compatible = "solomon,ssd1305fb-i2c";
+		reg = <0x3d>;
+		solomon,height = <64>;
+		solomon,width = <128>;
+		solomon,page-offset = <0>;
+		solomon,col-offset = <4>;
+		solomon,prechargep2 = <15>;
+		reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>;
+		vbat-supply = <&sw2_reg>;
+		status = "disabled";
+	};
+
+	gpio_oled: gpio@41 {
+		compatible = "nxp,pca9536";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x41>;
+		vcc-supply = <&sw2_reg>;
+		status = "disabled";
+	};
+
+	touchkeys: keys@5a {
+		compatible = "fsl,mpr121-touchkey";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchkeys>;
+		reg = <0x5a>;
+		vdd-supply = <&sw2_reg>;
+		autorepeat;
+		linux,keycodes = <KEY_1>, <KEY_2>, <KEY_3>, <KEY_4>, <KEY_5>,
+				<KEY_6>, <KEY_7>, <KEY_8>, <KEY_9>,
+				<KEY_BACKSPACE>, <KEY_0>, <KEY_ENTER>;
+		poll-interval = <50>;
+		status = "disabled";
+	};
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b020
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b020
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b020
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b020
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b020
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b020
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b020
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b020
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b020
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b020
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b020
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b020
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b020
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b020
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b010
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x1b010
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b098
+		>;
+	};
+
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00	0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b899
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b899
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL	0x4001b899
+			MX6QDL_PAD_GPIO_6__I2C3_SDA	0x4001b899
+		>;
+	};
+
+	pinctrl_ipu1: ipu1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA7__GPIO3_IO07                  0x1b0b0
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13	0x1b098
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT	0x8
+		>;
+	};
+
+	pinctrl_sound: soundgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT0__GPIO1_IO16	0x1b0b0
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT	0x8
+		>;
+	};
+
+	pinctrl_touch: touchgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05	0x1b098
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02	0x1b098
+		>;
+	};
+
+	pinctrl_touchkeys: touchkeysgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12	0x1b098
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05	0x1b098
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0a8
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0a8
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__UART2_TX_DATA	0x1b098
+			MX6QDL_PAD_GPIO_8__UART2_RX_DATA	0x1b098
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__USB_H1_OC	0x1b098
+		>;
+	};
+
+	pinctrl_usbh1_vbus: usbh1-vbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x98
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x1b098
+			MX6QDL_PAD_EIM_D21__USB_OTG_OC		0x1b098
+		>;
+	};
+
+	pinctrl_usbotg_vbus: usbotg-vbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x98
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD	0x1f069
+			MX6QDL_PAD_SD4_CLK__SD4_CLK	0x10069
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0	0x17069
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1	0x17069
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2	0x17069
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3	0x17069
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4	0x17069
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5	0x17069
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6	0x17069
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7	0x17069
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__WDOG2_B	0x1b0b0
+		>;
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sound>;
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "disabled";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	vbus-supply = <&reg_usb_h1_vbus>;
+	over-current-active-low;
+	status = "disabled";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	vbus-supply = <&reg_usb_otg_vbus>;
+	over-current-active-low;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-d-cal = <106>;
+	status = "okay";
+};
+
+&usbphy2 {
+	fsl,tx-d-cal = <109>;
+	status = "disabled";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	keep-power-in-suspend;
+	vmmc-supply = <&sw2_reg>;
+	status = "okay";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&wdog2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl.dtsi
index fdd81fdc3f35..dc919e09a505 100644
--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl.dtsi
@@ -80,10 +80,13 @@
 		};
 	};
 
-	soc {
+	soc: soc {
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval-v1.2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval-v1.2.dts
new file mode 100644
index 000000000000..15d4a98ee976
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval-v1.2.dts
@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2024 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6q-apalis-eval.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX6Q/D Module on Apalis Evaluation Board v1.2";
+	compatible = "toradex,apalis_imx6q-eval-v1.2", "toradex,apalis_imx6q",
+		     "fsl,imx6q";
+
+	reg_3v3_mmc: regulator-3v3-mmc {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_3v3_mmc>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3.3V_MMC";
+		startup-delay-us = <10000>;
+	};
+
+	reg_3v3_sd: regulator-3v3-sd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_3v3_sd>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3.3V_SD";
+		startup-delay-us = <10000>;
+	};
+
+	reg_can1: regulator-can1 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_can1_power>;
+		regulator-name = "5V_SW_CAN1";
+		startup-delay-us = <10000>;
+	};
+
+	reg_can2: regulator-can2 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_can2_power>;
+		regulator-name = "5V_SW_CAN2";
+		startup-delay-us = <10000>;
+	};
+
+	sound-carrier {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,name = "apalis-nau8822";
+		simple-audio-card,routing =
+			"Headphones", "LHP",
+			"Headphones", "RHP",
+			"Speaker", "LSPK",
+			"Speaker", "RSPK",
+			"Line Out", "AUXOUT1",
+			"Line Out", "AUXOUT2",
+			"LAUX", "Line In",
+			"RAUX", "Line In",
+			"LMICP", "Mic In",
+			"RMICP", "Mic In";
+		simple-audio-card,widgets =
+			"Headphones", "Headphones",
+			"Line Out", "Line Out",
+			"Speaker", "Speaker",
+			"Microphone", "Mic In",
+			"Line", "Line In";
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&nau8822_1a>;
+			system-clock-frequency = <12288000>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&ssi2>;
+		};
+	};
+};
+
+&can1 {
+	xceiver-supply = <&reg_can1>;
+	status = "okay";
+};
+
+&can2 {
+	xceiver-supply = <&reg_can2>;
+	status = "okay";
+};
+
+/* I2C1_SDA/SCL on MXM3 209/211 */
+&i2c1 {
+	/* Audio Codec */
+	nau8822_1a: audio-codec@1a {
+		compatible = "nuvoton,nau8822";
+		reg = <0x1a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_nau8822>;
+		#sound-dai-cells = <0>;
+	};
+
+	/* Current measurement into module VCC */
+	hwmon@40 {
+		compatible = "ti,ina219";
+		reg = <0x40>;
+		shunt-resistor = <5000>;
+	};
+
+	/* Temperature Sensor */
+	temperature-sensor@4f {
+		compatible = "ti,tmp75c";
+		reg = <0x4f>;
+	};
+
+	/* EEPROM */
+	eeprom@57 {
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x57>;
+		pagesize = <16>;
+		size = <256>;
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+/* MMC1 */
+&usdhc1 {
+	bus-width = <4>;
+	pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_mmc_cd>;
+	vmmc-supply = <&reg_3v3_mmc>;
+	status = "okay";
+};
+
+/* SD1 */
+&usdhc2 {
+	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>;
+	vmmc-supply = <&reg_3v3_sd>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enable_3v3_mmc: enable3v3mmcgrp {
+		fsl,pins = <
+			/* MMC1_PWR_CTRL */
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
+		>;
+	};
+
+	pinctrl_enable_3v3_sd: enable3v3sdgrp {
+		fsl,pins = <
+			/* SD1_PWR_CTRL */
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
+		>;
+	};
+
+	pinctrl_enable_can1_power: enablecan1powergrp {
+		fsl,pins = <
+			/* CAN1_PWR_EN */
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
+		>;
+	};
+
+	pinctrl_enable_can2_power: enablecan2powergrp {
+		fsl,pins = <
+			/* CAN2_PWR_EN */
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
+		>;
+	};
+
+	pinctrl_nau8822: nau8822grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT16__AUD5_TXC	0x130b0
+			MX6QDL_PAD_DISP0_DAT17__AUD5_TXD	0x130b0
+			MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS	0x130b0
+			MX6QDL_PAD_DISP0_DAT19__AUD5_RXD	0x130b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dts
new file mode 100644
index 000000000000..1f2200f50059
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dts
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2014-2022 Toradex
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include "imx6q-apalis-eval.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX6Q/D Module on Apalis Evaluation Board";
+	compatible = "toradex,apalis_imx6q-eval", "toradex,apalis_imx6q",
+		     "fsl,imx6q";
+
+	reg_pcie_switch: regulator-pcie-switch {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "pcie_switch";
+		startup-delay-us = <100000>;
+		status = "okay";
+	};
+};
+
+&can1 {
+	xceiver-supply = <&reg_3v3_sw>;
+	status = "okay";
+};
+
+&can2 {
+	xceiver-supply = <&reg_3v3_sw>;
+	status = "okay";
+};
+
+&pcie {
+	vpcie-supply = <&reg_pcie_switch>;
+	status = "okay";
+};
+
+&sound_spdif {
+	status = "okay";
+};
+
+/* MMC1 */
+&usdhc1 {
+	status = "okay";
+};
+
+/* SD1 */
+&usdhc2 {
+	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dtsi
new file mode 100644
index 000000000000..b6c45ad3f430
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dtsi
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2014-2024 Toradex
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6q.dtsi"
+#include "imx6qdl-apalis.dtsi"
+
+/ {
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c3;
+		i2c2 = &i2c2;
+		rtc0 = &rtc_i2c;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_3v3_sw: regulator-3v3-sw {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3.3V_SW";
+	};
+};
+
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+/*
+ * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
+ * board)
+ */
+&i2c3 {
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_reset_moci>;
+	/* active-high meaning opposite of regular PERST# active-low polarity */
+	reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+	reset-gpio-active-high;
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&reg_usb_host_vbus {
+	status = "okay";
+};
+
+&reg_usb_otg_vbus {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&spdif {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	vbus-supply = <&reg_usb_host_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	disable-over-current;
+	vbus-supply = <&reg_usb_otg_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.1.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.1.dts
new file mode 100644
index 000000000000..44637d606e61
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.1.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2014-2022 Toradex
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+#include "imx6q-apalis-ixora-v1.2.dts"
+
+/ {
+	model = "Toradex Apalis iMX6Q/D Module on Ixora Carrier Board V1.1";
+	compatible = "toradex,apalis_imx6q-ixora-v1.1", "toradex,apalis_imx6q",
+		     "fsl,imx6q";
+
+
+};
+
+/delete-node/ &eeprom;
+/delete-node/ &reg_3v3_vmmc;
+/delete-node/ &reg_can1_supply;
+/delete-node/ &reg_can2_supply;
+
+&can1 {
+	/delete-property/ xceiver-supply;
+};
+
+&can2 {
+	/delete-property/ xceiver-supply;
+};
+
+/* MMC1 */
+&usdhc1 {
+	/delete-property/ cap-power-off-card;
+	/delete-property/ pinctrl-1;
+	/delete-property/ vmmc-supply;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts
new file mode 100644
index 000000000000..3ac7a4501620
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts
@@ -0,0 +1,280 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2014-2022 Toradex
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6q.dtsi"
+#include "imx6qdl-apalis.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX6Q/D Module on Ixora Carrier Board V1.2";
+	compatible = "toradex,apalis_imx6q-ixora-v1.2", "toradex,apalis_imx6q",
+		     "fsl,imx6q";
+
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c3;
+		i2c2 = &i2c2;
+		rtc0 = &rtc_i2c;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds_ixora>;
+
+		led4-green {
+			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+			label = "LED_4_GREEN";
+		};
+
+		led4-red {
+			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+			label = "LED_4_RED";
+		};
+
+		led5-green {
+			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+			label = "LED_5_GREEN";
+		};
+
+		led5-red {
+			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+			label = "LED_5_RED";
+		};
+	};
+
+	reg_3v3_vmmc: regulator-3v3-vmmc {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_3v3_vmmc>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3v3_vmmc";
+		startup-delay-us = <100>;
+	};
+
+	reg_can1_supply: regulator-can1-supply {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_can1_power>;
+		regulator-name = "can1_supply";
+		startup-delay-us = <1000>;
+	};
+
+	reg_can2_supply: regulator-can2-supply {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_can2_power>;
+		regulator-name = "can2_supply";
+		startup-delay-us = <1000>;
+	};
+};
+
+&can1 {
+	xceiver-supply = <&reg_can1_supply>;
+	status = "okay";
+};
+
+&can2 {
+	xceiver-supply = <&reg_can2_supply>;
+	status = "okay";
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart24_forceoff>;
+
+	/*
+	 * uart-2-4-on-x21-enable-hog enables the UART transceiver for Apalis
+	 * UART2 and UART3. If one wants to disable the transceiver force
+	 * the GPIO to output-low, if one wants to control the transceiver
+	 * from user space delete the hog node.
+	 */
+	uart-2-4-on-x21-enable-hog {
+		gpio-hog;
+		gpios = <11 GPIO_ACTIVE_HIGH>; /* MXM3 180 */
+		output-high;
+	};
+};
+
+/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
+&i2c1 {
+	status = "okay";
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+/*
+ * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
+ * board)
+ */
+&i2c3 {
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_reset_moci>;
+	/* active-high meaning opposite of regular PERST# active-low polarity */
+	reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+	reset-gpio-active-high;
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&reg_usb_host_vbus {
+	status = "okay";
+};
+
+&reg_usb_otg_vbus {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&sound_spdif {
+	status = "okay";
+};
+
+&spdif {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	vbus-supply = <&reg_usb_host_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	disable-over-current;
+	vbus-supply = <&reg_usb_otg_vbus>;
+	status = "okay";
+};
+
+/* MMC1 */
+&usdhc1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_mmc_cd>;
+	pinctrl-1 = <&pinctrl_usdhc1_4bit_sleep &pinctrl_mmc_cd_sleep>;
+	bus-width = <4>;
+	cap-power-off-card;
+	vmmc-supply = <&reg_3v3_vmmc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enable_3v3_vmmc: enable3v3vmmcgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
+		>;
+	};
+
+	pinctrl_enable_can1_power: enablecan1powergrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
+		>;
+	};
+
+	pinctrl_enable_can2_power: enablecan2powergrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart24_forceoff: uart24forceoffgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x1b0b0
+		>;
+	};
+
+	pinctrl_leds_ixora: ledsixoragrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x1b0b0
+			MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x1b0b0
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
+		>;
+	};
+
+	pinctrl_mmc_cd_sleep: mmccdslpgrp {
+		fsl,pins = <
+			 /* MMC1 CD */
+			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x0
+		>;
+	};
+
+	pinctrl_usdhc1_4bit_sleep: usdhc1-4bitslpgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD     0x3000
+			MX6QDL_PAD_SD1_CLK__SD1_CLK     0x3000
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0  0x3000
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1  0x3000
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2  0x3000
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3  0x3000
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora.dts
new file mode 100644
index 000000000000..f338be435277
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora.dts
@@ -0,0 +1,182 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2014-2022 Toradex
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6q.dtsi"
+#include "imx6qdl-apalis.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX6Q/D Module on Ixora Carrier Board";
+	compatible = "toradex,apalis_imx6q-ixora", "toradex,apalis_imx6q",
+		     "fsl,imx6q";
+
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c3;
+		i2c2 = &i2c2;
+		rtc0 = &rtc_i2c;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds_ixora>;
+
+		led4-green {
+			gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+			label = "LED_4_GREEN";
+		};
+
+		led4-red {
+			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+			label = "LED_4_RED";
+		};
+
+		led5-green {
+			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+			label = "LED_5_GREEN";
+		};
+
+		led5-red {
+			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+			label = "LED_5_RED";
+		};
+	};
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "okay";
+};
+
+/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
+&i2c1 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+	};
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+/*
+ * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
+ * board)
+ */
+&i2c3 {
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_reset_moci>;
+	/* active-high meaning opposite of regular PERST# active-low polarity */
+	reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+	reset-gpio-active-high;
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&reg_usb_host_vbus {
+	status = "okay";
+};
+
+&reg_usb_otg_vbus {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&sound_spdif {
+	status = "okay";
+};
+
+&spdif {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	vbus-supply = <&reg_usb_host_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	disable-over-current;
+	vbus-supply = <&reg_usb_otg_vbus>;
+	status = "okay";
+};
+
+/* SD1 */
+&usdhc2 {
+	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_leds_ixora: ledsixoragrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0
+			MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x1b0b0
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-eval-v1.2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-eval-v1.2.dts
new file mode 100644
index 000000000000..908dab57fd87
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-eval-v1.2.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2025 Toradex */
+
+/dts-v1/;
+
+#include "imx6q-apalis-eval-v1.2.dts"
+#include "imx6qdl-apalis-v1.2.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX6Q/D Module V1.2+ on Apalis Evaluation Board v1.2";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-eval.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-eval.dts
new file mode 100644
index 000000000000..5463d4127382
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-eval.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2025 Toradex */
+
+/dts-v1/;
+
+#include "imx6q-apalis-eval.dts"
+#include "imx6qdl-apalis-v1.2.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX6Q/D Module V1.2+ on Apalis Evaluation Board";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-ixora-v1.1.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-ixora-v1.1.dts
new file mode 100644
index 000000000000..84eabf81ba84
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-ixora-v1.1.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2025 Toradex */
+
+/dts-v1/;
+
+#include "imx6q-apalis-ixora-v1.1.dts"
+#include "imx6qdl-apalis-v1.2.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX6Q/D Module V1.2+ on Ixora Carrier Board V1.1";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-ixora-v1.2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-ixora-v1.2.dts
new file mode 100644
index 000000000000..d7cfab4de457
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-ixora-v1.2.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2025 Toradex */
+
+/dts-v1/;
+
+#include "imx6q-apalis-ixora-v1.2.dts"
+#include "imx6qdl-apalis-v1.2.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX6Q/D Module V1.2+ on Ixora Carrier Board V1.2";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-ixora.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-ixora.dts
new file mode 100644
index 000000000000..189b074e31ce
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-v1.2-ixora.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2025 Toradex */
+
+/dts-v1/;
+
+#include "imx6q-apalis-ixora.dts"
+#include "imx6qdl-apalis-v1.2.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX6Q/D Module V1.2+ on Ixora Carrier Board";
+};
diff --git a/arch/arm/boot/dts/imx6q-apf6dev.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apf6dev.dts
index 664b0af8f0bb..664b0af8f0bb 100644
--- a/arch/arm/boot/dts/imx6q-apf6dev.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-apf6dev.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-arm2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-arm2.dts
new file mode 100644
index 000000000000..235148c1edf1
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-arm2.dts
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6q.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad Armadillo2 Board";
+	compatible = "fsl,imx6q-arm2", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 0>;
+		enable-active-high;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		debug-led {
+			label = "Heartbeat";
+			gpios = <&gpio3 25 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "disabled"; /* gpmi nand conflicts with SD */
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x80000000
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_KEY_COL2__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+			MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B	0x1b0b1
+			MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_cdwp: usdhc3cdwpgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x80000000
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x80000000
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+		>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	/delete-property/ interrupts;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc3 {
+	cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_3p3v>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3
+		     &pinctrl_usdhc3_cdwp>;
+	status = "okay";
+};
+
+&usdhc4 {
+	non-removable;
+	vmmc-supply = <&reg_3p3v>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	fsl,dte-mode;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-b450v3.dts b/arch/arm/boot/dts/nxp/imx/imx6q-b450v3.dts
index d994b32ad825..d994b32ad825 100644
--- a/arch/arm/boot/dts/imx6q-b450v3.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-b450v3.dts
diff --git a/arch/arm/boot/dts/imx6q-b650v3.dts b/arch/arm/boot/dts/nxp/imx/imx6q-b650v3.dts
index fa1a1df37cde..b0d345f5d071 100644
--- a/arch/arm/boot/dts/imx6q-b650v3.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-b650v3.dts
@@ -98,8 +98,8 @@
 };
 
 &usbphy1 {
-	fsl,tx-cal-45-dn-ohms = <55>;
-	fsl,tx-cal-45-dp-ohms = <55>;
+	fsl,tx-cal-45-dn-ohms = <54>;
+	fsl,tx-cal-45-dp-ohms = <54>;
 	fsl,tx-d-cal = <100>;
 };
 
diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts
index db8c332df6a1..cad112e05475 100644
--- a/arch/arm/boot/dts/imx6q-b850v3.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts
@@ -227,7 +227,6 @@
 
 		#address-cells = <3>;
 		#size-cells = <2>;
-		#interrupt-cells = <1>;
 
 		bridge@2,1 {
 			compatible = "pci10b5,8605";
@@ -235,7 +234,6 @@
 
 			#address-cells = <3>;
 			#size-cells = <2>;
-			#interrupt-cells = <1>;
 
 			/* Intel Corporation I210 Gigabit Network Connection */
 			ethernet@3,0 {
@@ -250,7 +248,6 @@
 
 			#address-cells = <3>;
 			#size-cells = <2>;
-			#interrupt-cells = <1>;
 
 			/* Intel Corporation I210 Gigabit Network Connection */
 			switch_nic: ethernet@4,0 {
diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi
index 6330d75f8f39..53013b12c2ec 100644
--- a/arch/arm/boot/dts/imx6q-ba16.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi
@@ -55,7 +55,7 @@
 		compatible = "pwm-backlight";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_display>;
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <  0   1   2   3   4   5   6   7   8   9
 				      10  11  12  13  14  15  16  17  18  19
 				      20  21  22  23  24  25  26  27  28  29
@@ -142,7 +142,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: n25q032@0 {
+	flash: flash@0 {
 		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -222,6 +222,8 @@
 		pinctrl-0 = <&pinctrl_pmic>;
 		interrupt-parent = <&gpio7>;
 		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		onkey {
 			compatible = "dlg,da9063-onkey";
@@ -349,7 +351,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
@@ -624,7 +625,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_reset: usdhc3grp-reset {
+	pinctrl_usdhc3_reset: usdhc3-resetgrp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_RST__SD3_RESET   0x170F9
 		>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dts b/arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dts
new file mode 100644
index 000000000000..929def2bb35e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dts
@@ -0,0 +1,774 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Support for the i.MX6-based Bosch ACC board.
+ *
+ * Copyright (C) 2016 Garz & Fricke GmbH
+ * Copyright (C) 2018 DENX Software Engineering GmbH, Heiko Schocher <hs@denx.de>
+ * Copyright (C) 2018 DENX Software Engineering GmbH, Niel Fourie <lusus@denx.de>
+ * Copyright (C) 2019-2021 Bosch Thermotechnik GmbH, Matthias Winker <matthias.winker@bosch.com>
+ * Copyright (C) 2022 DENX Software Engineering GmbH, Philip Oberfichtner <pro@denx.de>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "imx6q.dtsi"
+
+/ {
+	model = "Bosch ACC";
+	compatible = "bosch,imx6q-acc", "fsl,imx6q";
+
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		mmc0 = &usdhc4;
+		mmc1 = &usdhc2;
+		serial0 = &uart2;
+		serial1 = &uart1;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	backlight_lvds: backlight-lvds {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 200000 0>;
+		brightness-levels = <0 61 499 1706 4079 8022 13938 22237 33328 47623 65535>;
+		num-interpolated-steps = <10>;
+		default-brightness-level = <60>;
+		power-supply = <&reg_lcd>;
+	};
+
+	panel {
+		compatible = "dataimage,fg1001l0dsswmg01";
+		backlight = <&backlight_lvds>;
+		power-supply = <&reg_lcd>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	refclk: refclk {
+		compatible = "fixed-factor-clock";
+		#clock-cells = <0>;
+		clocks = <&clks IMX6QDL_CLK_CKO2>;
+		clock-div = <1>;
+		clock-mult = <1>;
+		clock-output-names = "12mhz_refclk";
+		assigned-clocks = <&clks IMX6QDL_CLK_CKO>,
+				  <&clks IMX6QDL_CLK_CKO2>,
+				  <&clks IMX6QDL_CLK_CKO2_SEL>;
+		assigned-clock-parents = <&clks IMX6QDL_CLK_CKO2>,
+					 <&clks IMX6QDL_CLK_CKO2_PODF>,
+					 <&clks IMX6QDL_CLK_OSC>;
+		assigned-clock-rates = <0>, <12000000>, <0>;
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			operating-points = <
+				/* kHz    uV */
+				1200000 1275000
+				996000  1225000
+				852000  1225000
+				792000  1150000
+				396000  950000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				1200000 1225000
+				996000	1175000
+				852000	1175000
+				792000	1150000
+				396000	1150000
+			>;
+		};
+
+		cpu1: cpu@1 {
+			operating-points = <
+				/* kHz    uV */
+				1200000 1275000
+				996000  1225000
+				852000  1225000
+				792000  1150000
+				396000  950000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				1200000 1225000
+				996000	1175000
+				852000	1175000
+				792000	1150000
+				396000	1150000
+			>;
+		};
+	};
+
+	pwm-leds {
+		compatible = "pwm-leds";
+
+		led_red: led-0 {
+			color = <LED_COLOR_ID_RED>;
+			max-brightness = <248>;
+			default-state = "off";
+			pwms = <&pwm2 0 500000 0>;
+		};
+
+		led_white: led-1 {
+			color = <LED_COLOR_ID_WHITE>;
+			max-brightness = <248>;
+			default-state = "off";
+			pwms = <&pwm3 0 500000 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reset_gpio_led>;
+
+		led-2 {
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	reg_5p0: regulator-5p0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5p0";
+	};
+
+	reg_vin: regulator-vin {
+		compatible = "regulator-fixed";
+		regulator-name = "VIN";
+		regulator-min-microvolt = <4500000>;
+		regulator-max-microvolt = <4500000>;
+		regulator-always-on;
+		vin-supply = <&reg_5p0>;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&reg_5p0>;
+	};
+
+	reg_usb_h2_vbus: regulator-usb-h2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_5p0> ;
+		regulator-always-on;
+	};
+
+	reg_vsnvs: regulator-vsnvs {
+		compatible = "regulator-fixed";
+		regulator-name = "VSNVS_3V0";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		regulator-always-on;
+		vin-supply = <&reg_5p0>;
+	};
+
+	reg_lcd: regulator-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD0 POWER";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd_enable>;
+		gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	reg_dac: regulator-dac {
+		compatible = "regulator-fixed";
+		regulator-name = "vref_dac";
+		regulator-min-microvolt = <20000>;
+		regulator-max-microvolt = <20000>;
+		vin-supply = <&reg_5p0> ;
+		regulator-boot-on;
+	};
+
+	reg_sw4: regulator-sw4 {
+		compatible = "regulator-fixed";
+		regulator-name = "SW4_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_5p0>;
+	};
+
+	reg_sys: regulator-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "SYS_4V2";
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+		regulator-always-on;
+		vin-supply = <&reg_5p0>;
+	};
+};
+
+&reg_arm {
+	vin-supply = <&sw2_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&sw1c_reg>;
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&reg_vsnvs>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&reg_vsnvs>;
+};
+
+&reg_vdd3p0 {
+	vin-supply = <&reg_vsnvs>;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	clocks = <&clks IMX6QDL_CLK_ENET>,
+		<&clks IMX6QDL_CLK_ENET>,
+		<&clks IMX6QDL_CLK_ENET>,
+		<&clks IMX6QDL_CLK_ENET_REF>;
+	clock-names = "ipg", "ahb", "ptp", "enet_out";
+	phy-mode = "rmii";
+	phy-supply = <&reg_sw4>;
+	phy-handle = <&ethphy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+			smsc,disable-energy-detect;
+		};
+	};
+};
+
+&gpu_vg {
+	status = "disabled";
+};
+
+&gpu_2d {
+	status = "disabled";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1c_reg: sw1c {
+				regulator-name = "VDD_SOC (sw1abc)";
+				regulator-min-microvolt = <1275000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-name = "VDD_ARM (sw2)";
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-name = "DDR_1V5a";
+				regulator-boot-on;
+				regulator-always-on;
+
+			};
+
+			sw3b_reg: sw3b {
+				regulator-name = "DDR_1V5b";
+				regulator-boot-on;
+				regulator-always-on;
+
+			};
+
+			sw4_reg: sw4 {
+				regulator-name = "AUX 3V15 (sw4)";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+				regulator-boot-on;
+				regulator-always-on;
+				status = "disabled";
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	lm75: sensor@49 {
+		compatible = "national,lm75b";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lm75>;
+		reg = <0x49>;
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	rtc: rtc@51 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	eeprom_ext: eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	usb3503: usb@8 {
+		compatible = "smsc,usb3503";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb3503>;
+		reg = <0x08>;
+		connect-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; /* Old: 0, SS: HIGH */
+		intn-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; /* Old: 1, SS: HIGH */
+		reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>; /* Old: 0, SS: HIGH */
+		initial-mode = <1>;
+		clocks = <&refclk>;
+		clock-names = "refclk";
+		refclk-frequency = <12000000>;
+	};
+
+	exc3000: touchscreen@2a {
+		compatible = "eeti,exc3000";
+		reg = <0x2a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ctouch>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+		touchscreen-size-x = <4096>;
+		touchscreen-size-y = <4096>;
+	};
+
+	vcnl4035: light-sensor@60 {
+		compatible = "vishay,vcnl4035";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_proximity>;
+		reg = <0x60>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	rts-gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+	linux,rs485-enabled-at-boot-time;
+	rs485-rx-during-tx;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbh2 {
+	pinctrl-names = "idle", "active";
+	pinctrl-0 = <&pinctrl_usbh2_idle>;
+	pinctrl-1 = <&pinctrl_usbh2_active>;
+	vbus-supply = <&reg_usb_h2_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	vbus-supply = <&reg_usb_otg_vbus>;
+	disable-over-current;
+	dr_mode = "otg";
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbphynop1 {
+	clocks = <&clks IMX6QDL_CLK_USBPHY1>;
+	clock-names = "main_clk";
+	vcc-supply = <&reg_usb_h1_vbus>;
+};
+
+&usbphynop2 {
+	vcc-supply = <&reg_usb_h2_vbus>;
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	voltage-ranges = <3300 3300>;
+	vmmc-supply = <&reg_sw4>;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	keep-power-in-suspend;
+	voltage-ranges = <3300 3300>;
+	vmmc-supply = <&reg_sw4>;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog1>;
+	fsl,ext-reset-output;
+	timeout-sec = <10>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23	0x1b0b0	/* FEC INT */
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x0001b098
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x0001b098
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x0001b098
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+		>;
+	};
+
+	pinctrl_reset_gpio_led: reset-gpio-led-grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18		0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b810
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b810
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL  0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_lcd_enable: lcdenablegrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23  0x1b0b0 /* lcd enable */
+			MX6QDL_PAD_EIM_D16__GPIO3_IO16  0x1b0b0 /* sel6_8 */
+		>;
+	};
+
+	pinctrl_lm75: lm75grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
+		>;
+	};
+
+	pinctrl_proximity: proximitygrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11  0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x0001b0b0
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x0001b0b0
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x0001b0b0
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x0001b0b0
+		>;
+	};
+
+	pinctrl_rtc: rtc-grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x1b0b0 /* RTC INT */
+		>;
+	};
+
+	pinctrl_ctouch: ctouch-grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 /* CTOUCH_INT */
+			MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x0001b0b0 /* CTOUCH_RESET */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x0001b0b0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA 0x1b0b1
+			MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D28__UART2_CTS_B 0x1b0b1
+			MX6QDL_PAD_EIM_D29__UART2_RTS_B 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh2_idle: usbh2-idle-grp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_TXC__USB_H2_DATA      0x00013018
+			MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x00013018
+		>;
+	};
+
+	pinctrl_usbh2_active: usbh2-active-grp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_TXC__USB_H2_DATA      0x00013018
+			MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x00017018
+		>;
+	};
+
+	pinctrl_usb3503: usb3503-grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1    0x00000018
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12     0x1b0b0 /* USB INT */
+			MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x0001b0b0 /* USB Reset */
+			MX6QDL_PAD_SD1_DAT0__GPIO1_IO16    0x1b0b0 /* USB Connect */
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD    0x00017069
+			MX6QDL_PAD_SD2_CLK__SD2_CLK    0x00010038
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x00017069
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x00017069
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x00017069
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x00017069
+			MX6QDL_PAD_GPIO_4__SD2_CD_B    0x0001b0b0
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD    0x00017059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK    0x00010059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x00017059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x00017059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x00017059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x00017059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x00017059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x00017059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x00017059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x00017059
+		>;
+	};
+
+	pinctrl_wdog1: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__WDOG1_B 0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi
index 10922375c51e..1e2266a2368b 100644
--- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi
@@ -94,7 +94,7 @@
 		mdio-gpio0 = &mdio0;
 	};
 
-	mdio0: mdio-gpio {
+	mdio0: mdio {
 		compatible = "virtual,mdio-gpio";
 		gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>, /* mdc */
 			<&gpio2 7 GPIO_ACTIVE_HIGH>; /* mdio */
@@ -160,7 +160,7 @@
 	pinctrl-0 = <&pinctrl_ecspi5>;
 	status = "okay";
 
-	m25_eeprom: m25p80@0 {
+	m25_eeprom: eeprom@0 {
 		compatible = "atmel,at25";
 		spi-max-frequency = <10000000>;
 		size = <0x8000>;
@@ -195,6 +195,8 @@
 			mma8453: mma8453@1c {
 				compatible = "fsl,mma8453";
 				reg = <0x1c>;
+				vdd-supply = <&reg_3p3v>;
+				vddio-supply = <&reg_3p3v>;
 			};
 		};
 
@@ -211,6 +213,8 @@
 			mpl3115: mpl3115@60 {
 				compatible = "fsl,mpl3115";
 				reg = <0x60>;
+				vdd-supply = <&reg_3p3v>;
+				vddio-supply = <&reg_3p3v>;
 			};
 		};
 
@@ -228,6 +232,7 @@
 			sgtl5000: codec@a {
 				compatible = "fsl,sgtl5000";
 				reg = <0x0a>;
+				#sound-dai-cells = <0>;
 				clocks = <&mclk>;
 				VDDA-supply = <&reg_1p8v>;
 				VDDIO-supply = <&reg_3p3v>;
@@ -244,6 +249,7 @@
 				reg = <0x74>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 				interrupt-parent = <&gpio2>;
 				interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
@@ -389,7 +395,6 @@
 
 		#address-cells = <3>;
 		#size-cells = <2>;
-		#interrupt-cells = <1>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts
index bfb530f29d9d..13245af8f74d 100644
--- a/arch/arm/boot/dts/imx6q-cm-fx6.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts
@@ -73,7 +73,7 @@
 		reset-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
 	};
 
-	reg_pcie_power_on_gpio: regulator-pcie-power-on-gpio {
+	reg_pcie_power_on_gpio: regulator-pcie-power-on {
 		compatible = "regulator-fixed";
 		regulator-name = "regulator-pcie-power-on-gpio";
 		regulator-min-microvolt = <3300000>;
@@ -99,6 +99,34 @@
 		enable-active-high;
 	};
 
+	avdd_reg: regulator-avdd {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	hpvdd_reg: regulator-hpvdd {
+		compatible = "regulator-fixed";
+		regulator-name = "hpvdd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	dcvdd_reg: regulator-dcvdd {
+		compatible = "regulator-fixed";
+		regulator-name = "dcvdd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	dbvdd_reg: regulator-dbvdd {
+		compatible = "regulator-fixed";
+		regulator-name = "dbvdd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	sound-analog {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "On-board analog audio";
@@ -127,12 +155,21 @@
 		};
 	};
 
+	spdif_out: spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
+	spdif_in: spdif-in {
+		compatible = "linux,spdif-dir";
+		#sound-dai-cells = <0>;
+	};
+
 	sound-spdif {
 		compatible = "fsl,imx-audio-spdif";
 		model = "imx-spdif";
-		spdif-controller = <&spdif>;
-		spdif-out;
-		spdif-in;
+		audio-cpu = <&spdif>;
+		audio-codec = <&spdif_out>, <&spdif_in>;
 	};
 };
 
@@ -141,7 +178,7 @@
 	pinctrl-0 = <&pinctrl_audmux>;
 	status = "okay";
 
-	ssi2 {
+	mux-ssi2 {
 		fsl,audmux-port = <1>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_RCLKDIR |
@@ -152,7 +189,7 @@
 		>;
 	};
 
-	audmux4 {
+	mux-audmux4 {
 		fsl,audmux-port = <3>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_TFSDIR |
@@ -260,10 +297,10 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	m25p80@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "st,m25p", "jedec,spi-nor";
+		compatible = "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
 	};
@@ -298,6 +335,10 @@
 		#sound-dai-cells = <0>;
 		compatible = "wlf,wm8731";
 		reg = <0x1a>;
+		AVDD-supply = <&avdd_reg>;
+		HPVDD-supply = <&hpvdd_reg>;
+		DCVDD-supply = <&dcvdd_reg>;
+		DBVDD-supply = <&dbvdd_reg>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx6q-cubox-i-emmc-som-v15.dts b/arch/arm/boot/dts/nxp/imx/imx6q-cubox-i-emmc-som-v15.dts
index 3e59ebbb3608..3e59ebbb3608 100644
--- a/arch/arm/boot/dts/imx6q-cubox-i-emmc-som-v15.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-cubox-i-emmc-som-v15.dts
diff --git a/arch/arm/boot/dts/imx6q-cubox-i-som-v15.dts b/arch/arm/boot/dts/nxp/imx/imx6q-cubox-i-som-v15.dts
index dab70d1230a2..dab70d1230a2 100644
--- a/arch/arm/boot/dts/imx6q-cubox-i-som-v15.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-cubox-i-som-v15.dts
diff --git a/arch/arm/boot/dts/imx6q-cubox-i.dts b/arch/arm/boot/dts/nxp/imx/imx6q-cubox-i.dts
index 1c7b262e3709..1c7b262e3709 100644
--- a/arch/arm/boot/dts/imx6q-cubox-i.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-cubox-i.dts
diff --git a/arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts b/arch/arm/boot/dts/nxp/imx/imx6q-dfi-fs700-m60.dts
index 8bfe6337cd65..8bfe6337cd65 100644
--- a/arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-dfi-fs700-m60.dts
diff --git a/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-dhcom-pdk2.dts
index d4d57370615d..6efd7e9fc1b1 100644
--- a/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-dhcom-pdk2.dts
@@ -4,7 +4,7 @@
  * Copyright (C) 2018 Marek Vasut <marex@denx.de>
  *
  * DHCOM iMX6 variant:
- * DHCM-iMX6Q-C0800-R102-F0819-E-SD-RTC-T-HS-I-01D2
+ * DHCM-iMX6Q-C080-R102-F0819-E-SD-RTC-T-HS-I-01D2
  * DHCOM PCB number: 493-300 or newer
  * PDK2 PCB number: 516-400 or newer
  */
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-display5-tianma-tm070-1280x768.dts b/arch/arm/boot/dts/nxp/imx/imx6q-display5-tianma-tm070-1280x768.dts
new file mode 100644
index 000000000000..059750270fc4
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-display5-tianma-tm070-1280x768.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2017
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+
+#include "imx6q-display5.dtsi"
+
+&panel {
+	compatible = "tianma,tm070jdhg30";
+};
+
+&ldb {
+	lvds0: lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-display5.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-display5.dtsi
index fef5d7254536..4e448b4810f2 100644
--- a/arch/arm/boot/dts/imx6q-display5.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-display5.dtsi
@@ -1,38 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2017
  * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is licensed under the terms of the GNU General Public
- *     License version 2.  This program is licensed "as is" without
- *     any warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -147,7 +116,7 @@
 	pinctrl-0 = <&pinctrl_audmux>;
 	status = "okay";
 
-	ssi2 {
+	mux-ssi2 {
 		fsl,audmux-port = <1>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_SYN |
@@ -159,7 +128,7 @@
 		>;
 	};
 
-	aud6 {
+	mux-aud6 {
 		fsl,audmux-port = <5>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_RFSEL(8) |
@@ -276,7 +245,7 @@
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
 
-	at24@50 {
+	eeprom@50 {
 		compatible = "atmel,24c256";
 		pagesize = <64>;
 		reg = <0x50>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/nxp/imx/imx6q-dmo-edmqmx6.dts
new file mode 100644
index 000000000000..cbe580dec182
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-dmo-edmqmx6.dts
@@ -0,0 +1,476 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Data Modul AG
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6q.dtsi"
+
+/ {
+	model = "Data Modul eDM-QMX6 Board";
+	compatible = "dmo,imx6q-edmqmx6", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	aliases {
+		gpio7 = &stmpe_gpio1;
+		gpio8 = &stmpe_gpio2;
+		stmpe-i2c0 = &stmpe1;
+		stmpe-i2c1 = &stmpe2;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_switch: regulator-usb-otg-switch {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_switch";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio7 12 0>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_usb_host1: regulator-usb-host1 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_host1_en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 31 0>;
+		enable-active-high;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			label = "blue";
+			gpios = <&stmpe_gpio1 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-green {
+			label = "green";
+			gpios = <&stmpe_gpio1 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-pink {
+			label = "pink";
+			gpios = <&stmpe_gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-red {
+			label = "red";
+			gpios = <&stmpe_gpio1 11 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&ecspi5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi5>;
+	cs-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "m25p80", "jedec,spi-nor";
+		spi-max-frequency = <40000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+	phy-supply = <&vgen2_1v2_eth>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2
+		     &pinctrl_stmpe1
+		     &pinctrl_stmpe2
+		     &pinctrl_pfuze>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <20 8>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+				regulator-always-on;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_1v2_eth: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vdd_high_in: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	stmpe1: stmpe1601@40 {
+		compatible = "st,stmpe1601";
+		reg = <0x40>;
+		interrupts = <30 0>;
+		interrupt-parent = <&gpio3>;
+		vcc-supply = <&sw2_reg>;
+		vio-supply = <&sw2_reg>;
+
+		stmpe_gpio1: gpio {
+			#gpio-cells = <2>;
+			compatible = "st,stmpe-gpio";
+			gpio-controller;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+		};
+	};
+
+	stmpe2: stmpe1601@44 {
+		compatible = "st,stmpe1601";
+		reg = <0x44>;
+		interrupts = <2 0>;
+		interrupt-parent = <&gpio5>;
+		vcc-supply = <&sw2_reg>;
+		vio-supply = <&sw2_reg>;
+
+		stmpe_gpio2: gpio {
+			#gpio-cells = <2>;
+			compatible = "st,stmpe-gpio";
+			gpio-controller;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+		};
+	};
+
+	temp1: ad7414@4c {
+		compatible = "ad,ad7414";
+		reg = <0x4c>;
+	};
+
+	temp2: ad7414@4d {
+		compatible = "ad,ad7414";
+		reg = <0x4d>;
+	};
+
+	rtc: rtc@68 {
+		compatible = "st,m41t62";
+		reg = <0x68>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x80000000
+			MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x80000000
+		>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
+			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX		0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi5: ecspi5rp-1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO	0x80000000
+			MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI		0x80000000
+			MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK		0x80000000
+			MX6QDL_PAD_SD2_DAT3__GPIO1_IO12		0x80000000
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__GPIO4_IO08		0x100b1
+		>;
+	};
+
+	pinctrl_pfuze: pfuze100grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x80000000
+		>;
+	};
+
+	pinctrl_stmpe1: stmpe1grp {
+		fsl,pins = <MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x80000000>;
+	};
+
+	pinctrl_stmpe2: stmpe2grp {
+		fsl,pins = <MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+		>;
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_host1>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	vmmc-supply = <&reg_3p3v>;
+	non-removable;
+	bus-width = <8>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-dms-ba16.dts b/arch/arm/boot/dts/nxp/imx/imx6q-dms-ba16.dts
index 48fb47e715f6..484a60892229 100644
--- a/arch/arm/boot/dts/imx6q-dms-ba16.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-dms-ba16.dts
@@ -47,7 +47,7 @@
 	pinctrl-0 = <&pinctrl_ecspi5>;
 	status = "okay";
 
-	m25_eeprom: m25p80@0 {
+	m25_eeprom: eeprom@0 {
 		compatible = "atmel,at25256B", "atmel,at25";
 		spi-max-frequency = <20000000>;
 		size = <0x8000>;
@@ -96,6 +96,7 @@
 	sgtl5000: codec@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		clocks = <&sys_mclk>;
 		lrclk-strength = <0x3>;
 		VDDA-supply = <&reg_1p8v>;
diff --git a/arch/arm/boot/dts/imx6q-ds.dts b/arch/arm/boot/dts/nxp/imx/imx6q-ds.dts
index b0a63a133977..b0a63a133977 100644
--- a/arch/arm/boot/dts/imx6q-ds.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-ds.dts
diff --git a/arch/arm/boot/dts/imx6q-emcon-avari.dts b/arch/arm/boot/dts/nxp/imx/imx6q-emcon-avari.dts
index 0f582a9d4c0e..02813368a820 100644
--- a/arch/arm/boot/dts/imx6q-emcon-avari.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-emcon-avari.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0 or MIT)
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
 //
 // Copyright (C) 2018 emtrion GmbH
 //
diff --git a/arch/arm/boot/dts/imx6q-evi.dts b/arch/arm/boot/dts/nxp/imx/imx6q-evi.dts
index c63f371ede8b..c936180ed32a 100644
--- a/arch/arm/boot/dts/imx6q-evi.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-evi.dts
@@ -55,6 +55,13 @@
 		reg = <0x10000000 0x40000000>;
 	};
 
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	reg_usbh1_vbus: regulator-usbhubreset {
 		compatible = "regulator-fixed";
 		regulator-name = "usbh1_vbus";
@@ -81,6 +88,7 @@
 
 	panel {
 		compatible = "sharp,lq101k1ly04";
+		power-supply = <&reg_3v3>;
 
 		port {
 			panel_in: endpoint {
@@ -124,7 +132,7 @@
 	pinctrl-0 = <&pinctrl_ecspi5 &pinctrl_ecspi5cs>;
 	status = "okay";
 
-	eeprom: m95m02@1 {
+	eeprom: eeprom@1 {
 		compatible = "st,m95m02", "atmel,at25";
 		size = <262144>;
 		pagesize = <256>;
@@ -134,7 +142,7 @@
 	};
 
 	pb_rtc: rtc@3 {
-		compatible = "nxp,rtc-pcf2123";
+		compatible = "nxp,pcf2123";
 		spi-max-frequency = <2450000>;
 		spi-cs-high;
 		reg = <3>;
@@ -146,6 +154,7 @@
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
 	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gk802.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gk802.dts
new file mode 100644
index 000000000000..e0d29b07fbb1
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gk802.dts
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2013 Philipp Zabel
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6q.dtsi"
+
+/ {
+	model = "Zealz GK802";
+	compatible = "zealz,imx6q-gk802", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		recovery-button {
+			label = "recovery";
+			gpios = <&gpio3 16 1>;
+			linux,code = <KEY_RESTART>;
+			wakeup-source;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+/* Internal I2C */
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	/* SDMC DM2016 1024 bit EEPROM + 128 bit OTP */
+	eeprom: dm2016@51 {
+		compatible = "sdmc,dm2016";
+		reg = <0x51>;
+	};
+};
+
+/* External I2C via HDMI */
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* Recovery button, active-low */
+			MX6QDL_PAD_EIM_D16__GPIO3_IO16  0x100b1
+			/* RTL8192CU enable GPIO, active-low */
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_16__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+		>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+/* External USB-A port (USBOTG) */
+&usbotg {
+	disable-over-current;
+	status = "okay";
+};
+
+/* Internal USB port (USBH1), connected to RTL8192CU */
+&usbh1 {
+	disable-over-current;
+	status = "okay";
+};
+
+/* External microSD */
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <4>;
+	cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+/* Internal microSD */
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-gw51xx.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw51xx.dts
index f80173458e3f..f80173458e3f 100644
--- a/arch/arm/boot/dts/imx6q-gw51xx.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw51xx.dts
diff --git a/arch/arm/boot/dts/imx6q-gw52xx.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw52xx.dts
index 6e1c493c9c8c..6e1c493c9c8c 100644
--- a/arch/arm/boot/dts/imx6q-gw52xx.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw52xx.dts
diff --git a/arch/arm/boot/dts/imx6q-gw53xx.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw53xx.dts
index f13df8e9c8c4..f13df8e9c8c4 100644
--- a/arch/arm/boot/dts/imx6q-gw53xx.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw53xx.dts
diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw5400-a.dts
index 4cde45d5c90c..bf8fde9cb38d 100644
--- a/arch/arm/boot/dts/imx6q-gw5400-a.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw5400-a.dts
@@ -34,20 +34,20 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 -> MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* 106 -> MX6_PANLEDR */
 			default-state = "off";
 		};
 
-		led2: user3 {
+		led2: led-user3 {
 			label = "user3";
 			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* 111 -> MX6_LOCLED# */
 			default-state = "off";
@@ -67,47 +67,37 @@
 		status = "okay";
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_1p0v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "1P0V";
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1000000>;
-			regulator-always-on;
-		};
+	reg_1p0v: regulator-1p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P0V";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-always-on;
+	};
 
-		reg_3p3v: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 
-		reg_usb_h1_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
 
-		reg_usb_otg_vbus: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 	};
 
 	sound {
@@ -137,7 +127,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "sst,w25q256", "jedec,spi-nor";
 		spi-max-frequency = <30000000>;
 		reg = <0>;
@@ -194,7 +184,7 @@
 		#gpio-cells = <2>;
 	};
 
-	rtc: ds1672@68 {
+	rtc: rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
@@ -206,7 +196,7 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 
@@ -320,6 +310,7 @@
 	codec: sgtl5000@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&sw4_reg>;
 		VDDIO-supply = <&reg_3p3v>;
diff --git a/arch/arm/boot/dts/imx6q-gw54xx.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw54xx.dts
index d5d46908cf6e..d5d46908cf6e 100644
--- a/arch/arm/boot/dts/imx6q-gw54xx.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw54xx.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw551x.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw551x.dts
new file mode 100644
index 000000000000..44d1871ac666
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw551x.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2014 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw551x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW551X";
+	compatible = "gw,imx6q-gw551x", "gw,ventana", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-gw552x.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw552x.dts
index c973b7304225..c973b7304225 100644
--- a/arch/arm/boot/dts/imx6q-gw552x.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw552x.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw553x.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw553x.dts
new file mode 100644
index 000000000000..22842f2ef685
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw553x.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2016 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw553x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW553X";
+	compatible = "gw,imx6q-gw553x", "gw,ventana", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw560x.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw560x.dts
new file mode 100644
index 000000000000..c69fdd064e2f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw560x.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2017 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw560x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW560X";
+	compatible = "gw,imx6q-gw560x", "gw,ventana", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw5903.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw5903.dts
new file mode 100644
index 000000000000..a9a33eeb9712
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw5903.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2017 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw5903.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW5903";
+	compatible = "gw,imx6q-gw5903", "gw,ventana", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw5904.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw5904.dts
new file mode 100644
index 000000000000..25a93cd4e5f5
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw5904.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2017 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw5904.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW5904";
+	compatible = "gw,imx6q-gw5904", "gw,ventana", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-gw5907.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw5907.dts
index b25526ef5886..b25526ef5886 100644
--- a/arch/arm/boot/dts/imx6q-gw5907.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw5907.dts
diff --git a/arch/arm/boot/dts/imx6q-gw5910.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw5910.dts
index 6aafa2fcee08..6aafa2fcee08 100644
--- a/arch/arm/boot/dts/imx6q-gw5910.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw5910.dts
diff --git a/arch/arm/boot/dts/imx6q-gw5912.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw5912.dts
index 4dcbd943cd93..4dcbd943cd93 100644
--- a/arch/arm/boot/dts/imx6q-gw5912.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw5912.dts
diff --git a/arch/arm/boot/dts/imx6q-gw5913.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw5913.dts
index 6f511f1665fd..6f511f1665fd 100644
--- a/arch/arm/boot/dts/imx6q-gw5913.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw5913.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-h100.dts b/arch/arm/boot/dts/nxp/imx/imx6q-h100.dts
new file mode 100644
index 000000000000..4c8ea4381559
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-h100.dts
@@ -0,0 +1,381 @@
+/*
+ * Copyright (C) 2015 Lucas Stach <kernel@pengutronix.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-brcm.dtsi"
+
+/ {
+	model = "Auvidea H100";
+	compatible = "auvidea,h100", "fsl,imx6q";
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+
+	aliases {
+		rtc0 = &rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	hdmi_osc: hdmi-osc {
+		compatible = "fixed-clock";
+		clock-output-names = "hdmi-osc";
+		clock-frequency = <27000000>;
+		#clock-cells = <0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_h100_leds>;
+
+		led0: led-power {
+			label = "power";
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		led1: led-stream {
+			label = "stream";
+			gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led2: led-rec {
+			label = "rec";
+			gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_hdmi: regulator-hdmi {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_h100_reg_hdmi>;
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+		regulator-name = "V_HDMI";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usbh1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_h100_usbh1_vbus>;
+		regulator-name = "USB_H1_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbotg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_h100_usbotg_vbus>;
+		regulator-name = "USB_OTG_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	sound-sgtl5000 {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "H100 on-board codec";
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-ext-port = <5>;
+		mux-int-port = <1>;
+		ssi-controller = <&ssi1>;
+	};
+};
+
+&audmux {
+	status = "okay";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_h100_hdmi>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_h100_i2c1>;
+	status = "okay";
+
+	eeprom: eeprom@51 {
+		compatible = "microchip,24c02", "atmel,24c02";
+		reg = <0x51>;
+	};
+
+	rtc: rtc@68 {
+		compatible = "nxp,pcf8523";
+		reg = <0x68>;
+	};
+
+	sgtl5000: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_h100_sgtl5000>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	tc358743: tc358743@f {
+		compatible = "toshiba,tc358743";
+		reg = <0x0f>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_h100_tc358743>;
+		clocks = <&hdmi_osc>;
+		clock-names = "refclk";
+		reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
+		/* IRQ has a wrong pull resistor which renders it useless  */
+
+		port {
+			tc358743_out: endpoint {
+				remote-endpoint = <&mipi_csi2_in>;
+				data-lanes = <1 2 3 4>;
+				clock-lanes = <0>;
+				clock-noncontinuous;
+				link-frequencies = /bits/ 64 <297000000>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_h100_i2c2>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_h100_hdmi: h100-hdmigrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE	0x1f8b0
+		>;
+	};
+
+	pinctrl_h100_i2c1: h100-i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_h100_i2c2: h100-i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_h100_leds: pinctrl-h100-ledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA0__GPIO3_IO00		0x1b0b0
+			MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x1b0b0
+			MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0x1b0b0
+		>;
+	};
+
+	pinctrl_h100_reg_hdmi: h100-reg-hdmigrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A18__GPIO2_IO20		0x1b0b0
+		>;
+	};
+
+	pinctrl_h100_sgtl5000: h100-sgtl5000grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT19__AUD5_RXD	0x130b0
+			MX6QDL_PAD_KEY_COL0__AUD5_TXC		0x130b0
+			MX6QDL_PAD_KEY_ROW0__AUD5_TXD		0x110b0
+			MX6QDL_PAD_KEY_COL1__AUD5_TXFS		0x130b0
+			MX6QDL_PAD_GPIO_5__CCM_CLKO1		0x130b0
+		>;
+	};
+
+	pinctrl_h100_tc358743: h100-tc358743grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x1b0b0
+		>;
+	};
+
+	pinctrl_h100_uart2: h100-uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_h100_usbh1_vbus: hummingboard-usbh1-vbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
+		>;
+	};
+
+	pinctrl_h100_usbotg_id: hummingboard-usbotg-idgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x13059
+		>;
+	};
+
+	pinctrl_h100_usbotg_vbus: hummingboard-usbotg-vbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0
+		>;
+	};
+
+	pinctrl_h100_usdhc2: h100-usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1f071
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x13059
+			MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x1b0b0
+		>;
+	};
+
+	pinctrl_h100_usdhc2_100mhz: h100-usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1f071
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100b9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+			MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x1b0b0
+		>;
+	};
+
+	pinctrl_h100_usdhc2_200mhz: h100-usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1f071
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170f9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100f9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+			MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x1b0b0
+		>;
+	};
+};
+
+&mipi_csi {
+	status = "okay";
+
+	port {
+		mipi_csi2_in: endpoint {
+			remote-endpoint = <&tc358743_out>;
+			data-lanes = <1 2 3 4>;
+			clock-lanes = <0>;
+			clock-noncontinuous;
+			link-frequencies = /bits/ 64 <297000000>;
+		};
+	};
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_h100_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	vbus-supply = <&reg_usbh1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	disable-over-current;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_h100_usbotg_id>;
+	vbus-supply = <&reg_usbotg_vbus>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_h100_usdhc2>;
+	pinctrl-1 = <&pinctrl_h100_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_h100_usdhc2_200mhz>;
+	vmmc-supply = <&reg_3p3v>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-hummingboard-emmc-som-v15.dts b/arch/arm/boot/dts/nxp/imx/imx6q-hummingboard-emmc-som-v15.dts
index c51b4e4fd71e..c51b4e4fd71e 100644
--- a/arch/arm/boot/dts/imx6q-hummingboard-emmc-som-v15.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-hummingboard-emmc-som-v15.dts
diff --git a/arch/arm/boot/dts/imx6q-hummingboard-som-v15.dts b/arch/arm/boot/dts/nxp/imx/imx6q-hummingboard-som-v15.dts
index e4132d62ffa2..e4132d62ffa2 100644
--- a/arch/arm/boot/dts/imx6q-hummingboard-som-v15.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-hummingboard-som-v15.dts
diff --git a/arch/arm/boot/dts/imx6q-hummingboard.dts b/arch/arm/boot/dts/nxp/imx/imx6q-hummingboard.dts
index 8c9e94e648a7..8c9e94e648a7 100644
--- a/arch/arm/boot/dts/imx6q-hummingboard.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-hummingboard.dts
diff --git a/arch/arm/boot/dts/imx6q-hummingboard2-emmc-som-v15.dts b/arch/arm/boot/dts/nxp/imx/imx6q-hummingboard2-emmc-som-v15.dts
index 1998ebfa0fe0..1998ebfa0fe0 100644
--- a/arch/arm/boot/dts/imx6q-hummingboard2-emmc-som-v15.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-hummingboard2-emmc-som-v15.dts
diff --git a/arch/arm/boot/dts/imx6q-hummingboard2-som-v15.dts b/arch/arm/boot/dts/nxp/imx/imx6q-hummingboard2-som-v15.dts
index d3ad7329cd6d..d3ad7329cd6d 100644
--- a/arch/arm/boot/dts/imx6q-hummingboard2-som-v15.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-hummingboard2-som-v15.dts
diff --git a/arch/arm/boot/dts/imx6q-hummingboard2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-hummingboard2.dts
index 5249f53dcdbc..5249f53dcdbc 100644
--- a/arch/arm/boot/dts/imx6q-hummingboard2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-hummingboard2.dts
diff --git a/arch/arm/boot/dts/imx6q-icore-mipi.dts b/arch/arm/boot/dts/nxp/imx/imx6q-icore-mipi.dts
index d51745268dbf..d51745268dbf 100644
--- a/arch/arm/boot/dts/imx6q-icore-mipi.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-icore-mipi.dts
diff --git a/arch/arm/boot/dts/imx6q-icore-ofcap10.dts b/arch/arm/boot/dts/nxp/imx/imx6q-icore-ofcap10.dts
index 02aca1e28ce3..1ad3bdcea4a3 100644
--- a/arch/arm/boot/dts/imx6q-icore-ofcap10.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-icore-ofcap10.dts
@@ -16,6 +16,7 @@
 	panel {
 		compatible = "ampire,am-1280800n3tzqw-t00h";
 		backlight = <&backlight_lvds>;
+		power-supply = <&reg_3p3v>;
 
 		port {
 			panel_in: endpoint {
diff --git a/arch/arm/boot/dts/imx6q-icore-ofcap12.dts b/arch/arm/boot/dts/nxp/imx/imx6q-icore-ofcap12.dts
index 241811c52b62..9e1c64da0b30 100644
--- a/arch/arm/boot/dts/imx6q-icore-ofcap12.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-icore-ofcap12.dts
@@ -16,6 +16,7 @@
 	panel {
 		compatible = "koe,tx31d200vm0baa";
 		backlight = <&backlight_lvds>;
+		power-supply = <&reg_3p3v>;
 
 		port {
 			panel_in: endpoint {
diff --git a/arch/arm/boot/dts/imx6q-icore-rqs.dts b/arch/arm/boot/dts/nxp/imx/imx6q-icore-rqs.dts
index cf6ba724f497..cf6ba724f497 100644
--- a/arch/arm/boot/dts/imx6q-icore-rqs.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-icore-rqs.dts
diff --git a/arch/arm/boot/dts/imx6q-icore.dts b/arch/arm/boot/dts/nxp/imx/imx6q-icore.dts
index fe28c3cf54c0..fe28c3cf54c0 100644
--- a/arch/arm/boot/dts/imx6q-icore.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-icore.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i-ads2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i-ads2.dts
new file mode 100644
index 000000000000..94c395cc020e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i-ads2.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-kontron-samx6i.dtsi"
+#include "imx6qdl-kontron-samx6i-ads2.dtsi"
+
+/ {
+	model = "Kontron SMARC-sAMX6i Quad/Dual on SMARC Eval 2.0 carrier";
+	compatible = "kontron,imx6q-samx6i-ads2", "kontron,imx6q-samx6i", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i.dtsi
new file mode 100644
index 000000000000..e76963436079
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2019 (C) Pengutronix, Marco Felsch <kernel@pengutronix.de>
+ */
+
+#include "imx6q.dtsi"
+#include "imx6qdl-kontron-samx6i.dtsi"
+
+/ {
+	model = "Kontron SMARC-sAMX6i Quad/Dual";
+	compatible = "kontron,imx6q-samx6i", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-kp-tpc.dts b/arch/arm/boot/dts/nxp/imx/imx6q-kp-tpc.dts
index 50fbf46d17c2..50fbf46d17c2 100644
--- a/arch/arm/boot/dts/imx6q-kp-tpc.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-kp-tpc.dts
diff --git a/arch/arm/boot/dts/imx6q-kp.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-kp.dtsi
index 1ade0bff681d..d6deb8c22b8c 100644
--- a/arch/arm/boot/dts/imx6q-kp.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-kp.dtsi
@@ -15,7 +15,7 @@
 / {
 	backlight_lcd: backlight-lcd {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <0 255>;
 		num-interpolated-steps = <255>;
 		default-brightness-level = <250>;
@@ -23,7 +23,7 @@
 
 	beeper {
 		compatible = "pwm-beeper";
-		pwms = <&pwm2 0 500000>;
+		pwms = <&pwm2 0 500000 0>;
 	};
 
 	lcd_display: display {
@@ -66,17 +66,17 @@
 	leds {
 		compatible = "gpio-leds";
 
-		green {
+		led-green {
 			label = "led1";
 			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
+			linux,default-trigger = "none";
 			default-state = "off";
 		};
 
-		red {
+		led-red {
 			label = "led0";
 			gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
+			linux,default-trigger = "none";
 			default-state = "off";
 		};
 	};
@@ -135,7 +135,7 @@
 	pinctrl-0 = <&pinctrl_audmux>;
 	status = "okay";
 
-	ssi1 {
+	mux-ssi1 {
 		fsl,audmux-port = <0>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_SYN |
@@ -147,7 +147,7 @@
 		>;
 	};
 
-	aud3 {
+	mux-aud3 {
 		fsl,audmux-port = <2>;
 		fsl,port-config = <
 			IMX_AUDMUX_V2_PTCR_SYN
@@ -378,14 +378,12 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
 };
 
 &pwm2 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm2>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6q-logicpd.dts b/arch/arm/boot/dts/nxp/imx/imx6q-logicpd.dts
index 46a4ddedb423..86b813a57c1e 100644
--- a/arch/arm/boot/dts/imx6q-logicpd.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-logicpd.dts
@@ -110,13 +110,13 @@
 };
 
 &iomuxc {
-	pinctrl_lcd_reg: lcdreg {
+	pinctrl_lcd_reg: lcdreggrp {
 		fsl,pins = <
 			MX6QDL_PAD_DI0_PIN15__GPIO4_IO17	0x100b0	/* R_LCD_PANEL_PWR */
 		>;
 	};
 
-	pinctrl_lcd_reset: lcdreset {
+	pinctrl_lcd_reset: lcdresetgrp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_A25__GPIO5_IO02	0x100b0	/* LCD_nRESET */
 		>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-lxr.dts b/arch/arm/boot/dts/nxp/imx/imx6q-lxr.dts
new file mode 100644
index 000000000000..ae4f8eeb105d
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-lxr.dts
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+//
+// Copyright 2024 Comvetia AG
+
+/dts-v1/;
+#include "imx6q-phytec-pfla02.dtsi"
+
+/ {
+	model = "COMVETIA QSoIP LXR-2";
+	compatible = "comvetia,imx6q-lxr", "phytec,imx6q-pfla02", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_spi_gpio>;
+		sck-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio5 7 GPIO_ACTIVE_HIGH>;
+		num-chipselects = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fpga@0 {
+			compatible = "altr,fpga-passive-serial";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fpga>;
+			nconfig-gpios = <&gpio4 18 GPIO_ACTIVE_LOW>;
+			nstat-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
+			confd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&ecspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&fec {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&usdhc3 {
+	no-1-8-v;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fpga: fpgagrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06       0x1b0b0
+			MX6QDL_PAD_DI0_PIN2__GPIO4_IO18     0x1b0b0
+			MX6QDL_PAD_DI0_PIN3__GPIO4_IO19     0x1b0b0
+		>;
+	};
+
+	pinctrl_spi_gpio: spigpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08  0x1b0b0
+			MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07  0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-marsboard.dts b/arch/arm/boot/dts/nxp/imx/imx6q-marsboard.dts
index 05ee28388229..2c9961333b0a 100644
--- a/arch/arm/boot/dts/imx6q-marsboard.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-marsboard.dts
@@ -73,14 +73,14 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_led>;
 
-		user1 {
+		led-user1 {
 			label = "imx6:green:user1";
 			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 			linux,default-trigger = "heartbeat";
 		};
 
-		user2 {
+		led-user2 {
 			label = "imx6:green:user2";
 			gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
 			default-state = "off";
@@ -100,7 +100,7 @@
 	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
-	m25p80@0 {
+	flash@0 {
 		compatible = "microchip,sst25vf016b";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-mba6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-mba6.dtsi
new file mode 100644
index 000000000000..1e5eb837fd80
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-mba6.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+&ecspi5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi5_mba6x>;
+	cs-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+};
+
+&ethphy {
+	rxdv-skew-ps = <180>;
+	txen-skew-ps = <120>;
+	rxd3-skew-ps = <180>;
+	rxd2-skew-ps = <180>;
+	rxd1-skew-ps = <180>;
+	rxd0-skew-ps = <180>;
+	txd3-skew-ps = <120>;
+	txd2-skew-ps = <0>;
+	txd1-skew-ps = <180>;
+	txd0-skew-ps = <360>;
+	txc-skew-ps = <1860>;
+	rxc-skew-ps = <1860>;
+};
+
+&sata {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi5_mba6x: ecspi5-mba6xgrp {
+		fsl,pins = <
+			/* HYS, SPEED = MED, 100k up, DSE = 011, SRE_FAST */
+			MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x1b099
+			MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI 0xb099
+			MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK 0xb099
+			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0xb099 /* eCSPI5 SS0 */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-mba6a.dts b/arch/arm/boot/dts/nxp/imx/imx6q-mba6a.dts
new file mode 100644
index 000000000000..349a08605a5e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-mba6a.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/dts-v1/;
+
+#include "imx6q-tqma6a.dtsi"
+#include "imx6qdl-mba6.dtsi"
+#include "imx6qdl-mba6a.dtsi"
+#include "imx6q-mba6.dtsi"
+
+/ {
+	model = "TQ TQMa6Q on MBa6x";
+	compatible = "tq,imx6q-mba6x-a", "tq,mba6a",
+		     "tq,imx6q-tqma6q-a", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-mba6b.dts b/arch/arm/boot/dts/nxp/imx/imx6q-mba6b.dts
new file mode 100644
index 000000000000..02c9f3e91b8f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-mba6b.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/dts-v1/;
+
+#include "imx6q-tqma6b.dtsi"
+#include "imx6qdl-mba6.dtsi"
+#include "imx6qdl-mba6b.dtsi"
+#include "imx6q-mba6.dtsi"
+
+/ {
+	model = "TQ TQMa6Q on MBa6x";
+	compatible = "tq,imx6q-mba6x-b", "tq,mba6b",
+		     "tq,imx6q-tqma6q-b", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-mccmon6.dts b/arch/arm/boot/dts/nxp/imx/imx6q-mccmon6.dts
index 55692c73943d..ef5c0eda8b15 100644
--- a/arch/arm/boot/dts/imx6q-mccmon6.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-mccmon6.dts
@@ -100,8 +100,10 @@
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
 	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
 	status = "okay";
 };
 
@@ -277,7 +279,7 @@
 	ranges = <0 0 0x08000000 0x08000000>;
 	status = "okay";
 
-	nor@0,0 {
+	flash@0,0 {
 		compatible = "cfi-flash";
 		reg = <0 0 0x02000000>;
 		#address-cells = <1>;
@@ -290,8 +292,6 @@
 };
 
 &iomuxc {
-	pinctrl-names = "default";
-
 	pinctrl_backlight: dispgrp {
 		fsl,pins = <
 			/* BLEN_OUT */
diff --git a/arch/arm/boot/dts/imx6q-nitrogen6_max.dts b/arch/arm/boot/dts/nxp/imx/imx6q-nitrogen6_max.dts
index 03bec0c53063..03bec0c53063 100644
--- a/arch/arm/boot/dts/imx6q-nitrogen6_max.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-nitrogen6_max.dts
diff --git a/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-nitrogen6_som2.dts
index eb4eecb6ed22..eb4eecb6ed22 100644
--- a/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-nitrogen6_som2.dts
diff --git a/arch/arm/boot/dts/imx6q-nitrogen6x.dts b/arch/arm/boot/dts/nxp/imx/imx6q-nitrogen6x.dts
index 435445a34ad0..435445a34ad0 100644
--- a/arch/arm/boot/dts/imx6q-nitrogen6x.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-nitrogen6x.dts
diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/nxp/imx/imx6q-novena.dts
index 225cf6b7a7a4..24fc3ff1c70c 100644
--- a/arch/arm/boot/dts/imx6q-novena.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-novena.dts
@@ -67,7 +67,7 @@
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 10000000>;
+		pwms = <&pwm1 0 10000000 0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_backlight_novena>;
 		power-supply = <&reg_lvds_lcd>;
@@ -86,7 +86,7 @@
 			linux,code = <KEY_POWER>;
 		};
 
-		lid {
+		lid-event {
 			label = "Lid";
 			gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
 			linux,input-type = <5>;	/* EV_SW */
@@ -99,7 +99,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_leds_novena>;
 
-		heartbeat {
+		led-heartbeat {
 			label = "novena:white:panel";
 			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
@@ -265,7 +265,7 @@
 		reg = <0x1c>;
 	};
 
-	rtc: pcf8523@68 {
+	rtc: rtc@68 {
 		compatible = "nxp,pcf8523";
 		reg = <0x68>;
 	};
@@ -288,7 +288,7 @@
 		vio-supply = <&reg_3p3v>;
 		vcc-supply = <&reg_3p3v>;
 
-		stmpe_touchscreen {
+		touchscreen {
 			compatible = "st,stmpe-ts";
 			st,sample-time = <4>;
 			st,mod-12b = <1>;
@@ -308,7 +308,7 @@
 	pinctrl-0 = <&pinctrl_i2c2_novena>;
 	status = "okay";
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 
@@ -465,7 +465,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	status = "okay";
 };
 
@@ -531,7 +530,7 @@
 };
 
 &iomuxc {
-	pinctrl_audmux_novena: audmuxgrp-novena {
+	pinctrl_audmux_novena: audmux-novenagrp {
 		fsl,pins = <
 			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
 			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
@@ -540,7 +539,7 @@
 		>;
 	};
 
-	pinctrl_backlight_novena: backlightgrp-novena {
+	pinctrl_backlight_novena: backlight-novenagrp {
 		fsl,pins = <
 			MX6QDL_PAD_DISP0_DAT8__PWM1_OUT		0x1b0b0
 			MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28	0x1b0b1
@@ -548,7 +547,7 @@
 		>;
 	};
 
-	pinctrl_ecspi3_novena: ecspi3grp-novena {
+	pinctrl_ecspi3_novena: ecspi3-novenagrp {
 		fsl,pins = <
 			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
 			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
@@ -556,7 +555,7 @@
 		>;
 	};
 
-	pinctrl_enet_novena: enetgrp-novena {
+	pinctrl_enet_novena: enet-novenagrp {
 		fsl,pins = <
 			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
@@ -579,7 +578,7 @@
 		>;
 	};
 
-	pinctrl_fpga_gpio: fpgagpiogrp-novena {
+	pinctrl_fpga_gpio: fpgagpio-novenagrp {
 		fsl,pins = <
 			/* FPGA power */
 			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17		0x1b0b1
@@ -615,7 +614,7 @@
 		>;
 	};
 
-	pinctrl_fpga_eim: fpgaeimgrp-novena {
+	pinctrl_fpga_eim: fpgaeim-novenagrp {
 		fsl,pins = <
 			/* FPGA power */
 			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17		0x1b0b1
@@ -651,7 +650,7 @@
 		>;
 	};
 
-	pinctrl_gpio_keys_novena: gpiokeysgrp-novena {
+	pinctrl_gpio_keys_novena: gpiokeys-novenagrp {
 		fsl,pins = <
 			/* User button */
 			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0
@@ -662,35 +661,35 @@
 		>;
 	};
 
-	pinctrl_hdmi_novena: hdmigrp-novena {
+	pinctrl_hdmi_novena: hdmi-novenagrp {
 		fsl,pins = <
 			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE	0x1f8b0
 			MX6QDL_PAD_EIM_A24__GPIO5_IO04		0x1b0b1
 		>;
 	};
 
-	pinctrl_i2c1_novena: i2c1grp-novena {
+	pinctrl_i2c1_novena: i2c1-novenagrp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
 			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
 		>;
 	};
 
-	pinctrl_i2c2_novena: i2c2grp-novena {
+	pinctrl_i2c2_novena: i2c2-novenagrp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
 			MX6QDL_PAD_EIM_D16__I2C2_SDA		0x4001b8b1
 		>;
 	};
 
-	pinctrl_i2c3_novena: i2c3grp-novena {
+	pinctrl_i2c3_novena: i2c3-novenagrp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
 			MX6QDL_PAD_EIM_D18__I2C3_SDA		0x4001b8b1
 		>;
 	};
 
-	pinctrl_kpp_novena: kppgrp-novena {
+	pinctrl_kpp_novena: kpp-novenagrp {
 		fsl,pins = <
 			/* Front panel button */
 			MX6QDL_PAD_KEY_ROW1__KEY_ROW1		0x1b0b1
@@ -699,13 +698,13 @@
 		>;
 	};
 
-	pinctrl_leds_novena: ledsgrp-novena {
+	pinctrl_leds_novena: leds-novenagrp {
 		fsl,pins = <
 			MX6QDL_PAD_SD1_DAT3__GPIO1_IO21		0x1b0b1
 		>;
 	};
 
-	pinctrl_pcie_novena: pciegrp-novena {
+	pinctrl_pcie_novena: pcie-novenagrp {
 		fsl,pins = <
 			/* Reset */
 			MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x1b0b1
@@ -716,13 +715,13 @@
 		>;
 	};
 
-	pinctrl_sata_novena: satagrp-novena {
+	pinctrl_sata_novena: sata-novenagrp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D30__GPIO3_IO30		0x1b0b1
 		>;
 	};
 
-	pinctrl_senoko_novena: senokogrp-novena {
+	pinctrl_senoko_novena: senoko-novenagrp {
 		fsl,pins = <
 			/* Senoko IRQ line */
 			MX6QDL_PAD_SD1_CLK__GPIO1_IO20		0x13048
@@ -731,7 +730,7 @@
 		>;
 	};
 
-	pinctrl_sound_novena: soundgrp-novena {
+	pinctrl_sound_novena: sound-novenagrp {
 		fsl,pins = <
 			/* Audio power regulator */
 			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b0b1
@@ -741,41 +740,41 @@
 		>;
 	};
 
-	pinctrl_stmpe_novena: stmpegrp-novena {
+	pinctrl_stmpe_novena: stmpe-novenagrp {
 		fsl,pins = <
 			/* Touchscreen interrupt */
 			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x1b0b1
 		>;
 	};
 
-	pinctrl_uart2_novena: uart2grp-novena {
+	pinctrl_uart2_novena: uart2-novenagrp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
 			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
 		>;
 	};
 
-	pinctrl_uart3_novena: uart3grp-novena {
+	pinctrl_uart3_novena: uart3-novenagrp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
 			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
 		>;
 	};
 
-	pinctrl_uart4_novena: uart4grp-novena {
+	pinctrl_uart4_novena: uart4-novenagrp {
 		fsl,pins = <
 			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA	0x1b0b1
 			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA	0x1b0b1
 		>;
 	};
 
-	pinctrl_usbotg_novena: usbotggrp-novena {
+	pinctrl_usbotg_novena: usbotg-novenagrp {
 		fsl,pins = <
 			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
 		>;
 	};
 
-	pinctrl_usdhc2_novena: usdhc2grp-novena {
+	pinctrl_usdhc2_novena: usdhc2-novenagrp {
 		fsl,pins = <
 			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170f9
 			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100f9
@@ -790,7 +789,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_novena: usdhc3grp-novena {
+	pinctrl_usdhc3_novena: usdhc3-novenagrp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
 			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
diff --git a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts b/arch/arm/boot/dts/nxp/imx/imx6q-phytec-mira-rdk-emmc.dts
index 2e70ea5623c6..322f071d972f 100644
--- a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-phytec-mira-rdk-emmc.dts
@@ -8,6 +8,9 @@
 #include "imx6q.dtsi"
 #include "imx6qdl-phytec-phycore-som.dtsi"
 #include "imx6qdl-phytec-mira.dtsi"
+#include "imx6qdl-phytec-mira-peb-eval-01.dtsi"
+#include "imx6qdl-phytec-mira-peb-av-02.dtsi"
+#include "imx6qdl-phytec-mira-peb-wlbt-05.dtsi"
 
 / {
 	model = "PHYTEC phyBOARD-Mira Quad Carrier-Board with eMMC";
diff --git a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/nxp/imx/imx6q-phytec-mira-rdk-nand.dts
index 65d2e483c136..3f13726c8058 100644
--- a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-phytec-mira-rdk-nand.dts
@@ -8,6 +8,9 @@
 #include "imx6q.dtsi"
 #include "imx6qdl-phytec-phycore-som.dtsi"
 #include "imx6qdl-phytec-mira.dtsi"
+#include "imx6qdl-phytec-mira-peb-eval-01.dtsi"
+#include "imx6qdl-phytec-mira-peb-av-02.dtsi"
+#include "imx6qdl-phytec-mira-peb-wlbt-05.dtsi"
 
 / {
 	model = "PHYTEC phyBOARD-Mira Quad Carrier-Board with NAND";
diff --git a/arch/arm/boot/dts/imx6q-phytec-pbab01.dts b/arch/arm/boot/dts/nxp/imx/imx6q-phytec-pbab01.dts
index affe30b02d5a..affe30b02d5a 100644
--- a/arch/arm/boot/dts/imx6q-phytec-pbab01.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-phytec-pbab01.dts
diff --git a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-phytec-pfla02.dtsi
index 500944bd2a05..500944bd2a05 100644
--- a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-phytec-pfla02.dtsi
diff --git a/arch/arm/boot/dts/imx6q-pico-dwarf.dts b/arch/arm/boot/dts/nxp/imx/imx6q-pico-dwarf.dts
index 479a63ed42af..479a63ed42af 100644
--- a/arch/arm/boot/dts/imx6q-pico-dwarf.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-pico-dwarf.dts
diff --git a/arch/arm/boot/dts/imx6q-pico-hobbit.dts b/arch/arm/boot/dts/nxp/imx/imx6q-pico-hobbit.dts
index b767131068f5..b767131068f5 100644
--- a/arch/arm/boot/dts/imx6q-pico-hobbit.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-pico-hobbit.dts
diff --git a/arch/arm/boot/dts/imx6q-pico-nymph.dts b/arch/arm/boot/dts/nxp/imx/imx6q-pico-nymph.dts
index e8ad4c12b263..e8ad4c12b263 100644
--- a/arch/arm/boot/dts/imx6q-pico-nymph.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-pico-nymph.dts
diff --git a/arch/arm/boot/dts/imx6q-pico-pi.dts b/arch/arm/boot/dts/nxp/imx/imx6q-pico-pi.dts
index cc2394ddad6c..cc2394ddad6c 100644
--- a/arch/arm/boot/dts/imx6q-pico-pi.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-pico-pi.dts
diff --git a/arch/arm/boot/dts/imx6q-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx6q-pinfunc.h
index e40409d04b97..e40409d04b97 100644
--- a/arch/arm/boot/dts/imx6q-pinfunc.h
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-pinfunc.h
diff --git a/arch/arm/boot/dts/imx6q-pistachio.dts b/arch/arm/boot/dts/nxp/imx/imx6q-pistachio.dts
index 7a33e54cc0f1..b8567167779c 100644
--- a/arch/arm/boot/dts/imx6q-pistachio.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-pistachio.dts
@@ -100,7 +100,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
 			wakeup-source;
@@ -124,7 +124,7 @@
 
 	backlight_lvds: backlight-lvds {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 50000>;
+		pwms = <&pwm1 0 50000 0>;
 		brightness-levels = <
 			0  /*1  2  3  4  5  6*/  7  8  9
 			10 11 12 13 14 15 16 17 18 19
@@ -145,6 +145,7 @@
 	panel {
 		compatible = "hannstar,hsd100pxn1";
 		backlight = <&backlight_lvds>;
+		power-supply = <&reg_3p3v>;
 
 		port {
 			panel_in: endpoint {
@@ -196,6 +197,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c1_sgtl5000>;
 		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&reg_1p8v>;
 		VDDIO-supply = <&reg_1p8v>;
@@ -208,7 +210,7 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 
@@ -323,8 +325,6 @@
 };
 
 &iomuxc {
-	pinctrl-names = "default";
-
 	pinctrl_hog: hoggrp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x1b0b0  /*pcie power*/
@@ -570,7 +570,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
@@ -636,11 +635,11 @@
 };
 
 &usbphy1 {
-	fsl,tx-d-cal = <0x5>;
+	fsl,tx-d-cal = <79>;
 };
 
 &usbphy2 {
-	fsl,tx-d-cal = <0x5>;
+	fsl,tx-d-cal = <79>;
 };
 
 &usdhc1 {
diff --git a/arch/arm/boot/dts/imx6q-prti6q.dts b/arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts
index b4605edfd2ab..73ed40ae5a7b 100644
--- a/arch/arm/boot/dts/imx6q-prti6q.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts
@@ -22,7 +22,7 @@
 		compatible = "pwm-backlight";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_backlight>;
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <0 16 64 255>;
 		num-interpolated-steps = <16>;
 		default-brightness-level = <1>;
@@ -57,6 +57,7 @@
 	panel {
 		compatible = "kyo,tcg121xglp";
 		backlight = <&backlight_lcd>;
+		power-supply = <&reg_3v3>;
 
 		port {
 			panel_in: endpoint {
@@ -72,6 +73,13 @@
 		regulator-max-microvolt = <1800000>;
 	};
 
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	reg_wifi: regulator-wifi {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -111,12 +119,21 @@
 		};
 	};
 
+	spdif_out: spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
+	spdif_in: spdif-in {
+		compatible = "linux,spdif-dir";
+		#sound-dai-cells = <0>;
+	};
+
 	sound-spdif {
 		compatible = "fsl,imx-audio-spdif";
 		model = "imx-spdif";
-		spdif-controller = <&spdif>;
-		spdif-in;
-		spdif-out;
+		audio-cpu = <&spdif>;
+		audio-codec = <&spdif_out>, <&spdif_in>;
 	};
 };
 
@@ -292,7 +309,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
@@ -359,13 +375,16 @@
 	keep-power-in-suspend;
 	status = "okay";
 
-	wifi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wifi@2 {
 		compatible = "ti,wl1271";
+		reg = <2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_wifi>;
 		interrupts-extended = <&gpio1 30 IRQ_TYPE_LEVEL_HIGH>;
-		ref-clock-frequency = "38400000";
-		tcxo-clock-frequency = "19200000";
+		ref-clock-frequency = <38400000>;
+		tcxo-clock-frequency = <19200000>;
 	};
 };
 
@@ -535,7 +554,7 @@
 		>;
 	};
 
-	pinctrl_wifi_npd: wifinpd {
+	pinctrl_wifi_npd: wifinpdgrp {
 		fsl,pins = <
 			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b8b0
 		>;
diff --git a/arch/arm/boot/dts/imx6q-prtwd2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-prtwd2.dts
index 349959d38020..0e02e448db10 100644
--- a/arch/arm/boot/dts/imx6q-prtwd2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-prtwd2.dts
@@ -22,6 +22,13 @@
 		reg = <0x80000000 0x20000000>;
 	};
 
+	clk50m_phy: phy-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
+	};
+
 	usdhc2_wifi_pwrseq: usdhc2_wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		pinctrl-names = "default";
@@ -49,13 +56,17 @@
 	status = "okay";
 };
 
+&clks {
+	clocks = <&clk50m_phy>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clk50m_phy>;
+};
+
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rmii";
-	clocks = <&clks IMX6QDL_CLK_ENET>,
-		 <&clks IMX6QDL_CLK_ENET>;
-	clock-names = "ipg", "ahb";
 	status = "okay";
 
 	fixed-link {
@@ -122,7 +133,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usb_eth_chg>;
 
-	pinctrl_can1phy: can1phy {
+	pinctrl_can1phy: can1phygrp {
 		fsl,pins = <
 			/* CAN1_SR */
 			MX6QDL_PAD_KEY_COL3__GPIO4_IO12	0x13070
@@ -145,9 +156,6 @@
 			MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22	0x1b0b0
 			/* nINTRP */
 			MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23	0x1b0b0
-
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x10030
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x10030
 		>;
 	};
 
@@ -179,7 +187,7 @@
 		>;
 	};
 
-	pinctrl_wifi_npd: wifinpd {
+	pinctrl_wifi_npd: wifinpdgrp {
 		fsl,pins = <
 			/* WL_REG_ON */
 			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10	0x13069
diff --git a/arch/arm/boot/dts/imx6q-rex-pro.dts b/arch/arm/boot/dts/nxp/imx/imx6q-rex-pro.dts
index 1767e1a3cd53..271f4b2d9b9f 100644
--- a/arch/arm/boot/dts/imx6q-rex-pro.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-rex-pro.dts
@@ -19,7 +19,7 @@
 };
 
 &ecspi3 {
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "sst,sst25vf032b", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/imx6q-sabreauto.dts b/arch/arm/boot/dts/nxp/imx/imx6q-sabreauto.dts
index 6e981a3e0a83..6e981a3e0a83 100644
--- a/arch/arm/boot/dts/imx6q-sabreauto.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-sabreauto.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-sabrelite.dts b/arch/arm/boot/dts/nxp/imx/imx6q-sabrelite.dts
new file mode 100644
index 000000000000..7c6a2f234ccb
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-sabrelite.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-sabrelite.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad SABRE Lite Board";
+	compatible = "fsl,imx6q-sabrelite", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
+
+&ipu1_csi1_from_mipi_vc1 {
+	clock-lanes = <0>;
+	data-lanes = <1 2>;
+};
diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/nxp/imx/imx6q-sabresd.dts
index eec944673c0b..eec944673c0b 100644
--- a/arch/arm/boot/dts/imx6q-sabresd.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-sabresd.dts
diff --git a/arch/arm/boot/dts/imx6q-savageboard.dts b/arch/arm/boot/dts/nxp/imx/imx6q-savageboard.dts
index 717ac62fc2cf..717ac62fc2cf 100644
--- a/arch/arm/boot/dts/imx6q-savageboard.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-savageboard.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-sbc6x.dts b/arch/arm/boot/dts/nxp/imx/imx6q-sbc6x.dts
new file mode 100644
index 000000000000..84fbcd129179
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-sbc6x.dts
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Pavel Machek <pavel@denx.de>
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+
+/ {
+	model = "MicroSys sbc6x board";
+	compatible = "microsys,sbc6x", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+};
+
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+		>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-skov-revc-lt2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-skov-revc-lt2.dts
index f00add7b3048..ff97d22eb09f 100644
--- a/arch/arm/boot/dts/imx6q-skov-revc-lt2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-skov-revc-lt2.dts
@@ -6,6 +6,7 @@
 #include "imx6q.dtsi"
 #include "imx6qdl-skov-cpu.dtsi"
 #include "imx6qdl-skov-cpu-revc.dtsi"
+#include "imx6qdl-skov-revc-lt2.dtsi"
 
 / {
 	model = "SKOV IMX6 CPU QuadCore";
diff --git a/arch/arm/boot/dts/imx6q-skov-revc-lt6.dts b/arch/arm/boot/dts/nxp/imx/imx6q-skov-revc-lt6.dts
index 3e3b36ad362a..3e3b36ad362a 100644
--- a/arch/arm/boot/dts/imx6q-skov-revc-lt6.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-skov-revc-lt6.dts
diff --git a/arch/arm/boot/dts/imx6q-skov-reve-mi1010ait-1cp1.dts b/arch/arm/boot/dts/nxp/imx/imx6q-skov-reve-mi1010ait-1cp1.dts
index 7f1f19b74bfa..0342a79ccd5d 100644
--- a/arch/arm/boot/dts/imx6q-skov-reve-mi1010ait-1cp1.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-skov-reve-mi1010ait-1cp1.dts
@@ -37,9 +37,9 @@
 
 &clks {
 	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>, <&clks IMX6QDL_CLK_ENET_REF_SEL>;
 	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
-				 <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
+				 <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, <&clk50m_phy>;
 };
 
 &hdmi {
@@ -125,3 +125,9 @@
 		>;
 	};
 };
+
+&reg_tft_vcom {
+	regulator-min-microvolt = <3160000>;
+	regulator-max-microvolt = <3160000>;
+	voltage-table = <3160000 73>;
+};
diff --git a/arch/arm/boot/dts/imx6q-solidsense.dts b/arch/arm/boot/dts/nxp/imx/imx6q-solidsense.dts
index 0e6a325df363..0e6a325df363 100644
--- a/arch/arm/boot/dts/imx6q-solidsense.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-solidsense.dts
diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts
index 343364d3e4f7..3bd0e2c9e57a 100644
--- a/arch/arm/boot/dts/imx6q-tbs2910.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts
@@ -37,7 +37,7 @@
 				      3000 1>;
 	};
 
-	ir_recv {
+	ir-receiver {
 		compatible = "gpio-ir-receiver";
 		gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
@@ -49,7 +49,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		blue {
+		led-blue {
 			label = "blue_status_led";
 			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
@@ -90,11 +90,16 @@
 		ssi-controller = <&ssi1>;
 	};
 
+	spdif_out: spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
 	sound-spdif {
 		compatible = "fsl,imx-audio-spdif";
 		model = "On-board SPDIF";
-		spdif-controller = <&spdif>;
-		spdif-out;
+		audio-cpu = <&spdif>;
+		audio-codec = <&spdif_out>;
 	};
 };
 
@@ -141,6 +146,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_sgtl5000>;
 		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_3p3v>;
 	};
@@ -159,7 +165,7 @@
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
 
-	rtc: ds1307@68 {
+	rtc: rtc@68 {
 		compatible = "dallas,ds1307";
 		reg = <0x68>;
 	};
diff --git a/arch/arm/boot/dts/imx6q-tqma6a.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-tqma6a.dtsi
index ab4c07c13a13..ab4c07c13a13 100644
--- a/arch/arm/boot/dts/imx6q-tqma6a.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-tqma6a.dtsi
diff --git a/arch/arm/boot/dts/imx6q-tqma6b.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-tqma6b.dtsi
index 7224c376c318..7224c376c318 100644
--- a/arch/arm/boot/dts/imx6q-tqma6b.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-tqma6b.dtsi
diff --git a/arch/arm/boot/dts/imx6q-ts4900.dts b/arch/arm/boot/dts/nxp/imx/imx6q-ts4900.dts
index dce1e8671ebe..dce1e8671ebe 100644
--- a/arch/arm/boot/dts/imx6q-ts4900.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-ts4900.dts
diff --git a/arch/arm/boot/dts/imx6q-ts7970.dts b/arch/arm/boot/dts/nxp/imx/imx6q-ts7970.dts
index 570bd3c309a6..570bd3c309a6 100644
--- a/arch/arm/boot/dts/imx6q-ts7970.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-ts7970.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1010-comtft.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1010-comtft.dts
new file mode 100644
index 000000000000..d630c572c704
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1010-comtft.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1010 Module on CoMpact TFT";
+	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+};
+
+&backlight {
+	pwms = <&pwm2 0 500000 0>;
+};
+
+&can1 {
+	status = "disabled";
+};
+
+&can2 {
+	xceiver-supply = <&reg_3v3>;
+};
+
+&kpp {
+	status = "disabled";
+};
+
+&lcd_panel {
+	compatible = "edt,etm0700g0edh6";
+};
+
+&reg_can_xcvr {
+	status = "disabled";
+};
+
+&touchscreen {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1010.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1010.dts
new file mode 100644
index 000000000000..01ac3493fa32
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1010.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1010/-1030 Module";
+	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+};
+
+&ipu2 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1020-comtft.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1020-comtft.dts
new file mode 100644
index 000000000000..1013025cb2d5
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1020-comtft.dts
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1020 Module on CoMpact TFT";
+	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+};
+
+&backlight {
+	pwms = <&pwm2 0 500000 0>;
+};
+
+&can1 {
+	status = "disabled";
+};
+
+&can2 {
+	xceiver-supply = <&reg_3v3>;
+};
+
+&ds1339 {
+	status = "disabled";
+};
+
+&gpmi {
+	status = "disabled";
+};
+
+&kpp {
+	status = "disabled";
+};
+
+&lcd_panel {
+	compatible = "edt,etm0700g0edh6";
+};
+
+&reg_can_xcvr {
+	status = "disabled";
+};
+
+&touchscreen {
+	status = "disabled";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	no-1-8-v;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
+			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1020.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1020.dts
new file mode 100644
index 000000000000..5dd8f1642db3
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1020.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1020 Module";
+	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+};
+
+&ds1339 {
+	status = "disabled";
+};
+
+&gpmi {
+	status = "disabled";
+};
+
+&ipu2 {
+	status = "disabled";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	non-removable;
+	no-1-8-v;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
+			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1036-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1036-mb7.dts
new file mode 100644
index 000000000000..ffa79c0eb05a
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1036-mb7.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6q-tx6q-1036.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1036 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1036.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1036.dts
new file mode 100644
index 000000000000..1346fd663d68
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1036.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1036 Module";
+	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+};
+
+&ds1339 {
+	status = "disabled";
+};
+
+&gpmi {
+	status = "disabled";
+};
+
+&ipu2 {
+	status = "disabled";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	non-removable;
+	no-1-8-v;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
+			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-10x0-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-10x0-mb7.dts
new file mode 100644
index 000000000000..eac07d5944cc
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-10x0-mb7.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6q-tx6q-1010.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1010/-1030 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1110.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1110.dts
new file mode 100644
index 000000000000..c485da35d333
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-1110.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lvds.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1110/-1130 Module";
+	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+};
+
+&ipu2 {
+	status = "disabled";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-11x0-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-11x0-mb7.dts
new file mode 100644
index 000000000000..53304fc3a90b
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-tx6q-11x0-mb7.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2016-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6q-tx6q-1110.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1110/-1130 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/imx6q-udoo.dts b/arch/arm/boot/dts/nxp/imx/imx6q-udoo.dts
index 52e9f4a211d0..52e9f4a211d0 100644
--- a/arch/arm/boot/dts/imx6q-udoo.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-udoo.dts
diff --git a/arch/arm/boot/dts/imx6q-utilite-pro.dts b/arch/arm/boot/dts/nxp/imx/imx6q-utilite-pro.dts
index d16ff2083d62..c78f101c3cc1 100644
--- a/arch/arm/boot/dts/imx6q-utilite-pro.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-utilite-pro.dts
@@ -89,7 +89,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
@@ -296,7 +296,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x170B9
 			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x100B9
@@ -307,7 +307,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x170F9
 			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x100F9
@@ -326,11 +326,14 @@
 &pcie {
 	pcie@0,0 {
 		reg = <0x000000 0 0 0 0>;
+		device_type = "pci";
 		#address-cells = <3>;
 		#size-cells = <2>;
+		bus-range = <0x00 0xff>;
+		ranges;
 
 		/* non-removable i211 ethernet card */
-		eth1: intel,i211@pcie0,0 {
+		eth1: ethernet@0,0 {
 			reg = <0x010000 0 0 0 0>;
 		};
 	};
diff --git a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts b/arch/arm/boot/dts/nxp/imx/imx6q-var-dt6customboard.dts
index 63550351340d..0225a621ec7a 100644
--- a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-var-dt6customboard.dts
@@ -18,7 +18,7 @@
 
 	backlight_lvds: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 50000>;
+		pwms = <&pwm2 0 50000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 248>;
 		default-brightness-level = <7>;
 		status = "okay";
@@ -28,7 +28,7 @@
 		compatible = "gpio-keys";
 		autorepeat;
 
-		back {
+		key-back {
 			gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_BACK>;
 			label = "Key Back";
@@ -37,7 +37,7 @@
 			wakeup-source;
 		};
 
-		home {
+		key-home {
 			gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_HOME>;
 			label = "Key Home";
@@ -46,7 +46,7 @@
 			wakeup-source;
 		};
 
-		menu {
+		key-menu {
 			gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_MENU>;
 			label = "Key Menu";
@@ -203,7 +203,6 @@
 };
 
 &pwm2 {
-	#pwm-cells = <2>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts b/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts
new file mode 100644
index 000000000000..a55644529c67
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts
@@ -0,0 +1,248 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Support for Variscite MX6 Carrier-board
+ *
+ * Copyright 2016 Variscite, Ltd. All Rights Reserved
+ * Copyright 2022 Bootlin
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-var-som.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Variscite i.MX6 QUAD/DUAL VAR-SOM-MX6 Custom Board";
+	compatible = "variscite,mx6customboard", "variscite,var-som-imx6q", "fsl,imx6q";
+
+	panel0: lvds-panel0 {
+		compatible = "panel-lvds";
+		backlight = <&backlight_lvds>;
+		width-mm = <152>;
+		height-mm = <91>;
+		label = "etm070001adh6";
+		data-mapping = "jeida-18";
+
+		panel-timing {
+			clock-frequency = <32000000>;
+			hactive = <800>;
+			vactive = <480>;
+			hback-porch = <39>;
+			hfront-porch = <39>;
+			vback-porch = <29>;
+			vfront-porch = <13>;
+			hsync-len = <47>;
+			vsync-len = <2>;
+		};
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	panel1: lvds-panel1 {
+		compatible = "panel-lvds";
+		width-mm = <152>;
+		height-mm = <91>;
+		data-mapping = "jeida-18";
+
+		panel-timing {
+			clock-frequency = <38251000>;
+			hactive = <800>;
+			vactive = <600>;
+			hback-porch = <112>;
+			hfront-porch = <32>;
+			vback-porch = <3>;
+			vfront-porch = <17>;
+			hsync-len = <80>;
+			vsync-len = <4>;
+		};
+
+		port {
+			panel_in_lvds1: endpoint {
+				remote-endpoint = <&lvds1_out>;
+			};
+		};
+	};
+
+	backlight_lvds: backlight-lvds {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 50000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 248>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	touchscreen@24 {
+		compatible = "cypress,tt21000";
+		reg = <0x24>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_3p3v>;
+		touchscreen-size-x = <880>;
+		touchscreen-size-y = <1280>;
+	};
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5306";
+		reg = <0x38>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <1800>;
+		touchscreen-size-y = <1000>;
+	};
+};
+
+&iomuxc {
+	pinctrl_camera: cameragrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19		0x1b0b0
+			MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN	0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK	0x1b0b0
+			MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC		0x1b0b0
+			MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC		0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX		0x1b0b0
+			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX		0x1b0b0
+		>;
+	};
+
+	pinctrl_ipu1: ipu1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
+			MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04		0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_EB3__UART3_RTS_B		0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg_var: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x17071
+			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x10071
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x17071
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x17071
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x17071
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x17071
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+		>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+
+	lvds-channel@1 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds1_out: endpoint {
+				remote-endpoint = <&panel_in_lvds1>;
+			};
+		};
+	};
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-vicut1.dts b/arch/arm/boot/dts/nxp/imx/imx6q-vicut1.dts
index 0a4e251be162..dd91aff3f9e2 100644
--- a/arch/arm/boot/dts/imx6q-vicut1.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-vicut1.dts
@@ -6,12 +6,9 @@
 /dts-v1/;
 #include "imx6q.dtsi"
 #include "imx6qdl-vicut1.dtsi"
+#include "imx6qdl-vicut1-12inch.dtsi"
 
 / {
 	model = "Kverneland UT1Q Board";
 	compatible = "kvg,vicut1q", "fsl,imx6q";
 };
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-wandboard-revb1.dts b/arch/arm/boot/dts/nxp/imx/imx6q-wandboard-revb1.dts
index f6ccbecff92c..f6ccbecff92c 100644
--- a/arch/arm/boot/dts/imx6q-wandboard-revb1.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-wandboard-revb1.dts
diff --git a/arch/arm/boot/dts/imx6q-wandboard-revd1.dts b/arch/arm/boot/dts/nxp/imx/imx6q-wandboard-revd1.dts
index 55331021d80c..55331021d80c 100644
--- a/arch/arm/boot/dts/imx6q-wandboard-revd1.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-wandboard-revd1.dts
diff --git a/arch/arm/boot/dts/imx6q-wandboard.dts b/arch/arm/boot/dts/nxp/imx/imx6q-wandboard.dts
index 0be548beef86..0be548beef86 100644
--- a/arch/arm/boot/dts/imx6q-wandboard.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-wandboard.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-yapp4-crux.dts b/arch/arm/boot/dts/nxp/imx/imx6q-yapp4-crux.dts
new file mode 100644
index 000000000000..bddf3822ebf7
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-yapp4-crux.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2021 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6dl-yapp4-common.dtsi"
+
+/ {
+	model = "Y Soft IOTA Crux i.MX6Quad board";
+	compatible = "ysoft,imx6q-yapp4-crux", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0xf0000000>;
+	};
+};
+
+&gpio_oled {
+	status = "okay";
+};
+
+&leds {
+	status = "okay";
+};
+
+&oled_1305 {
+	status = "okay";
+};
+
+&oled_1309 {
+	status = "okay";
+};
+
+&reg_pu {
+	regulator-always-on;
+};
+
+&reg_usb_h1_vbus {
+	status = "okay";
+};
+
+&touchkeys {
+	status = "okay";
+};
+
+&uart2 {
+	status = "disabled";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-yapp4-pegasus.dts b/arch/arm/boot/dts/nxp/imx/imx6q-yapp4-pegasus.dts
new file mode 100644
index 000000000000..7332f2718982
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-yapp4-pegasus.dts
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2021 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6dl-yapp43-common.dtsi"
+
+/ {
+	model = "Y Soft IOTA Pegasus i.MX6Quad board";
+	compatible = "ysoft,imx6q-yapp4-pegasus", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0xf0000000>;
+	};
+};
+
+&beeper {
+	status = "okay";
+};
+
+&gpio_oled {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&leds {
+	status = "okay";
+};
+
+&oled_1305 {
+	status = "okay";
+};
+
+&oled_1309 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&reg_pu {
+	regulator-always-on;
+};
+
+&reg_usb_h1_vbus {
+	status = "okay";
+};
+
+&touchkeys {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-zii-rdu2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-zii-rdu2.dts
index a1c5e69d81ba..a1c5e69d81ba 100644
--- a/arch/arm/boot/dts/imx6q-zii-rdu2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-zii-rdu2.dts
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q.dtsi
index 9caba4529c71..df86049a695b 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6q.dtsi
@@ -159,14 +159,17 @@
 		};
 	};
 
-	soc {
+	soc: soc {
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x40000>;
+			ranges = <0 0x00900000 0x40000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 
-		bus@2000000 { /* AIPS1 */
+		aips1: bus@2000000 { /* AIPS1 */
 			spba-bus@2000000 {
 				ecspi5: spi@2018000 {
 					#address-cells = <1>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis-v1.2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis-v1.2.dtsi
new file mode 100644
index 000000000000..83fa04fc9f18
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis-v1.2.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2025 Toradex */
+
+&i2c2 {
+	/delete-node/ stmpe811@41;
+
+	ad7879_ts: touchscreen@2c {
+		compatible = "adi,ad7879-1";
+		reg = <0x2c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch_int>;
+		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio4>;
+		touchscreen-max-pressure = <4096>;
+		adi,resistance-plate-x = <120>;
+		adi,first-conversion-delay = /bits/ 8 <3>;
+		adi,acquisition-time = /bits/ 8 <1>;
+		adi,median-filter-size = /bits/ 8 <2>;
+		adi,averaging = /bits/ 8 <1>;
+		adi,conversion-interval = /bits/ 8 <255>;
+	};
+
+	tla2024_adc: adc@49 {
+		compatible = "ti,tla2024";
+		reg = <0x49>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Apalis AN1_ADC0 */
+		channel@4 {
+			reg = <4>;
+			ti,datarate = <4>;
+			ti,gain = <1>;
+		};
+
+		/* Apalis AN1_ADC1 */
+		channel@5 {
+			reg = <5>;
+			ti,datarate = <4>;
+			ti,gain = <1>;
+		};
+
+		/* Apalis AN1_ADC2 */
+		channel@6 {
+			reg = <6>;
+			ti,datarate = <4>;
+			ti,gain = <1>;
+		};
+
+		/* Apalis AN1_TSWIP_ADC3 */
+		channel@7 {
+			reg = <7>;
+			ti,datarate = <4>;
+			ti,gain = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
new file mode 100644
index 000000000000..5fcd7cdb7001
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
@@ -0,0 +1,1384 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2014-2022 Toradex
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Toradex Apalis iMX6Q/D Module";
+
+	aliases {
+		mmc0 = &usdhc3; /* eMMC */
+		mmc1 = &usdhc1; /* MMC1 slot */
+		mmc2 = &usdhc2; /* SD1 slot */
+		/delete-property/ mmc3;
+	};
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 45 63 88 119 158 203 255>;
+		default-brightness-level = <4>;
+		enable-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_bl_on>;
+		power-supply = <&reg_module_3v3>;
+		pwms = <&pwm4 0 5000000 PWM_POLARITY_INVERTED>;
+		status = "disabled";
+	};
+
+	clk_ov5640_osc: clk-ov5640-osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-wakeup {
+			debounce-interval = <10>;
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+			label = "Wake-Up";
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+
+	lcd_display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
+		status = "disabled";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di1_disp1>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel_dpi: panel-dpi {
+		compatible = "edt,et057090dhu";
+		backlight = <&backlight>;
+
+		status = "disabled";
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	panel_lvds: panel-lvds {
+		compatible = "panel-lvds";
+		backlight = <&backlight>;
+		status = "disabled";
+
+		port {
+			lvds_panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	poweroff {
+		compatible = "regulator-poweroff";
+		cpu-supply = <&vgen2_reg>;
+	};
+
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3";
+	};
+
+	reg_module_3v3_audio: regulator-module-3v3-audio {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3_AUDIO";
+	};
+
+	reg_ov5640_1v8_d_o_vdd: regulator-ov5640-1v8-d-o-vdd {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "DOVDD/DVDD_1.8V";
+		/* Note: The CSI module uses on-board 3.3V_SW supply */
+		vin-supply = <&reg_module_3v3>;
+	};
+
+	reg_ov5640_2v8_a_vdd: regulator-ov5640-2v8-a-vdd {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <2800000>;
+		regulator-min-microvolt = <2800000>;
+		regulator-name = "AVDD/AFVDD_2.8V";
+		/* Note: The CSI module uses on-board 3.3V_SW supply */
+		vin-supply = <&reg_module_3v3>;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_regulator_usbotg_pwr>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb_otg_vbus";
+		status = "disabled";
+	};
+
+	/* on module USB hub */
+	reg_usb_host_vbus_hub: regulator-usb-host-vbus-hub {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_regulator_usbhub_pwr>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb_host_vbus_hub";
+		startup-delay-us = <2000>;
+		status = "okay";
+	};
+
+	reg_usb_host_vbus: regulator-usb-host-vbus {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_regulator_usbh_pwr>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb_host_vbus";
+		vin-supply = <&reg_usb_host_vbus_hub>;
+		status = "disabled";
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		audio-codec = <&codec>;
+		audio-routing =
+			"LINE_IN", "Line In Jack",
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		model = "apalis-imx6";
+		mux-ext-port = <4>;
+		mux-int-port = <1>;
+		ssi-controller = <&ssi1>;
+	};
+
+	spdif_out: spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
+	spdif_in: spdif-in {
+		compatible = "linux,spdif-dir";
+		#sound-dai-cells = <0>;
+	};
+
+	sound_spdif: sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		audio-cpu = <&spdif>;
+		audio-codec = <&spdif_out>, <&spdif_in>;
+		model = "imx-spdif";
+		status = "disabled";
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_flexcan1_default>;
+	pinctrl-1 = <&pinctrl_flexcan1_sleep>;
+	status = "disabled";
+};
+
+&can2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_flexcan2_default>;
+	pinctrl-1 = <&pinctrl_flexcan2_sleep>;
+	status = "disabled";
+};
+
+/* Apalis SPI1 */
+&ecspi1 {
+	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "disabled";
+};
+
+/* Apalis SPI2 */
+&ecspi2 {
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "disabled";
+};
+
+&gpio1 {
+	gpio-line-names = "MXM3_84",
+			  "MXM3_4",
+			  "MXM3_15/GPIO7",
+			  "MXM3_96",
+			  "MXM3_37",
+			  "",
+			  "MXM3_17/GPIO8",
+			  "MXM3_14",
+			  "MXM3_12",
+			  "MXM3_2",
+			  "MXM3_184",
+			  "MXM3_180",
+			  "MXM3_178",
+			  "MXM3_176",
+			  "MXM3_188",
+			  "MXM3_186",
+			  "MXM3_160",
+			  "MXM3_162",
+			  "MXM3_150",
+			  "MXM3_144",
+			  "MXM3_154",
+			  "MXM3_146",
+			  "",
+			  "",
+			  "MXM3_72";
+};
+
+&gpio2 {
+	gpio-line-names = "MXM3_148",
+			  "MXM3_152",
+			  "MXM3_156",
+			  "MXM3_158",
+			  "MXM3_1/GPIO1",
+			  "MXM3_3/GPIO2",
+			  "MXM3_5/GPIO3",
+			  "MXM3_7/GPIO4",
+			  "MXM3_95",
+			  "MXM3_6",
+			  "MXM3_8",
+			  "MXM3_123",
+			  "MXM3_126",
+			  "MXM3_128",
+			  "MXM3_130",
+			  "MXM3_132",
+			  "MXM3_253",
+			  "MXM3_251",
+			  "MXM3_283",
+			  "MXM3_281",
+			  "MXM3_279",
+			  "MXM3_277",
+			  "MXM3_243",
+			  "MXM3_235",
+			  "MXM3_231",
+			  "MXM3_229",
+			  "MXM3_233",
+			  "MXM3_198",
+			  "MXM3_275",
+			  "MXM3_273",
+			  "MXM3_207",
+			  "MXM3_122";
+};
+
+&gpio3 {
+	gpio-line-names = "MXM3_271",
+			  "MXM3_269",
+			  "MXM3_301",
+			  "MXM3_299",
+			  "MXM3_297",
+			  "MXM3_295",
+			  "MXM3_293",
+			  "MXM3_291",
+			  "MXM3_289",
+			  "MXM3_287",
+			  "MXM3_249",
+			  "MXM3_247",
+			  "MXM3_245",
+			  "MXM3_286",
+			  "MXM3_239",
+			  "MXM3_35",
+			  "MXM3_205",
+			  "MXM3_203",
+			  "MXM3_201",
+			  "MXM3_116",
+			  "MXM3_114",
+			  "MXM3_262",
+			  "MXM3_274",
+			  "MXM3_124",
+			  "MXM3_110",
+			  "MXM3_120",
+			  "MXM3_263",
+			  "MXM3_265",
+			  "",
+			  "MXM3_135",
+			  "MXM3_261",
+			  "MXM3_259";
+};
+
+&gpio4 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_194",
+			  "MXM3_136",
+			  "MXM3_134",
+			  "MXM3_140",
+			  "MXM3_138",
+			  "",
+			  "MXM3_220",
+			  "",
+			  "",
+			  "MXM3_18",
+			  "MXM3_16",
+			  "",
+			  "",
+			  "MXM3_214",
+			  "MXM3_216",
+			  "MXM3_164";
+};
+
+&gpio5 {
+	gpio-line-names = "MXM3_159",
+			  "",
+			  "",
+			  "",
+			  "MXM3_257",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_200",
+			  "MXM3_196",
+			  "MXM3_204",
+			  "MXM3_202",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_191",
+			  "MXM3_197",
+			  "MXM3_77",
+			  "MXM3_195",
+			  "MXM3_221",
+			  "MXM3_225",
+			  "MXM3_223",
+			  "MXM3_227",
+			  "MXM3_209",
+			  "MXM3_211",
+			  "MXM3_118",
+			  "MXM3_112",
+			  "MXM3_187",
+			  "MXM3_185";
+};
+
+&gpio6 {
+	gpio-line-names = "MXM3_183",
+			  "MXM3_181",
+			  "MXM3_179",
+			  "MXM3_177",
+			  "MXM3_175",
+			  "MXM3_173",
+			  "MXM3_255",
+			  "MXM3_83",
+			  "MXM3_91",
+			  "MXM3_13/GPIO6",
+			  "MXM3_11/GPIO5",
+			  "MXM3_79",
+			  "",
+			  "",
+			  "MXM3_190",
+			  "MXM3_193",
+			  "MXM3_89";
+};
+
+&gpio7 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_99",
+			  "MXM3_85",
+			  "MXM3_217",
+			  "MXM3_215";
+};
+
+&gpr {
+	ipu1_csi0_mux {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		port@1 {
+			reg = <1>;
+			ipu1_csi0_mux_from_parallel_sensor: endpoint {
+				remote-endpoint = <&adv7280_to_ipu1_csi0_mux>;
+			};
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy>;
+	phy-reset-duration = <10>;
+	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@7 {
+			interrupt-parent = <&gpio1>;
+			interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+			reg = <7>;
+		};
+	};
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi_ddc &pinctrl_hdmi_cec>;
+	status = "disabled";
+};
+
+/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "disabled";
+
+	atmel_mxt_ts: touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		/* These GPIOs are muxed with the iomuxc node */
+		interrupt-parent = <&gpio6>;
+		interrupts = <10 IRQ_TYPE_EDGE_FALLING>;	/* MXM3_11 */
+		reg = <0x4a>;
+		reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>;	/* MXM3_13 */
+		status = "disabled";
+	};
+};
+
+/*
+ * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
+ * touch screen controller
+ */
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1875000>;
+				regulator-min-microvolt = <300000>;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1875000>;
+				regulator-min-microvolt = <300000>;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1975000>;
+				regulator-min-microvolt = <400000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <5150000>;
+				regulator-min-microvolt = <5000000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3000000>;
+				regulator-min-microvolt = <1000000>;
+			};
+
+			vref_reg: vrefddr {
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1550000>;
+				regulator-min-microvolt = <800000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1550000>;
+				regulator-min-microvolt = <800000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+			};
+		};
+	};
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		#sound-dai-cells = <0>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
+		reg = <0x0a>;
+		VDDA-supply = <&reg_module_3v3_audio>;
+		VDDIO-supply = <&reg_module_3v3>;
+		VDDD-supply = <&vgen4_reg>;
+	};
+
+	/* STMPE811 touch screen controller */
+	stmpe811@41 {
+		compatible = "st,stmpe811";
+		blocks = <0x5>;
+		id = <0>;
+		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio4>;
+		irq-trigger = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch_int>;
+		reg = <0x41>;
+		/* 3.25 MHz ADC clock speed */
+		st,adc-freq = <1>;
+		/* 12-bit ADC */
+		st,mod-12b = <1>;
+		/* internal ADC reference */
+		st,ref-sel = <0>;
+		/* ADC conversion time: 80 clocks */
+		st,sample-time = <4>;
+
+		stmpe_ts: touchscreen {
+			compatible = "st,stmpe-ts";
+			/* 8 sample average control */
+			st,ave-ctrl = <3>;
+			/* 7 length fractional part in z */
+			st,fraction-z = <7>;
+			/*
+			 * 50 mA typical 80 mA max touchscreen drivers
+			 * current limit value
+			 */
+			st,i-drive = <1>;
+			/* 1 ms panel driver settling time */
+			st,settling = <3>;
+			/* 5 ms touch detect interrupt delay */
+			st,touch-det-delay = <5>;
+		};
+
+		stmpe_adc: adc {
+			compatible = "st,stmpe-adc";
+			#io-channel-cells = <1>;
+			/* forbid to use ADC channels 3-0 (touch) */
+			st,norequest-mask = <0x0F>;
+		};
+	};
+};
+
+/*
+ * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
+ * board)
+ */
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio3 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "disabled";
+
+	adv_7280: adv7280@21 {
+		compatible = "adi,adv7280";
+		adi,force-bt656-4;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1_csi0>;
+		reg = <0x21>;
+		status = "disabled";
+
+		port {
+			adv7280_to_ipu1_csi0_mux: endpoint {
+				bus-width = <8>;
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+			};
+		};
+	};
+
+	ov5640_csi_cam: ov5640_mipi@3c {
+		compatible = "ovti,ov5640";
+		AVDD-supply = <&reg_ov5640_2v8_a_vdd>;
+		DOVDD-supply = <&reg_ov5640_1v8_d_o_vdd>;
+		DVDD-supply = <&reg_ov5640_1v8_d_o_vdd>;
+		clock-names = "xclk";
+		clocks = <&clks IMX6QDL_CLK_CKO2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cam_mclk>;
+		/* These GPIOs are muxed with the iomuxc node */
+		powerdown-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+		reg = <0x3c>;
+		reset-gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+		status = "disabled";
+
+		port {
+			ov5640_to_mipi_csi2: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+				remote-endpoint = <&mipi_csi_from_ov5640>;
+			};
+		};
+	};
+};
+
+&ipu1_di1_disp1 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&ldb {
+	lvds-channel@0 {
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&lvds_panel_in>;
+			};
+		};
+	};
+
+	lvds-channel@1 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+
+		port@4 {
+			reg = <4>;
+
+			lvds1_out: endpoint {
+			};
+		};
+	};
+};
+
+&mipi_csi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "disabled";
+
+	port@0 {
+		reg = <0>;
+
+		mipi_csi_from_ov5640: endpoint {
+			clock-lanes = <0>;
+			data-lanes = <1 2>;
+			remote-endpoint = <&ov5640_to_mipi_csi2>;
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "disabled";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "disabled";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "disabled";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	status = "disabled";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	fsl,dte-mode;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+&uart2 {
+	fsl,dte-mode;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_dte>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+&uart4 {
+	fsl,dte-mode;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4_dte>;
+	status = "disabled";
+};
+
+&uart5 {
+	fsl,dte-mode;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5_dte>;
+	status = "disabled";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	status = "disabled";
+};
+
+/* MMC1 */
+&usdhc1 {
+	bus-width = <8>;
+	cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	no-1-8-v;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_usdhc1_8bit &pinctrl_mmc_cd>;
+	vqmmc-supply = <&reg_module_3v3>;
+	status = "disabled";
+};
+
+/* SD1 */
+&usdhc2 {
+	bus-width = <4>;
+	disable-wp;
+	no-1-8-v;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	vqmmc-supply = <&reg_module_3v3>;
+	status = "disabled";
+};
+
+/* eMMC */
+&usdhc3 {
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	vqmmc-supply = <&reg_module_3v3>;
+	status = "okay";
+};
+
+&weim {
+	status = "disabled";
+};
+
+&iomuxc {
+	/* Mux the Apalis GPIOs */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2
+		     &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4
+		     &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6
+		     &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8
+		    >;
+
+	pinctrl_apalis_gpio1: apalisgpio1grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x130b0
+		>;
+	};
+
+	pinctrl_apalis_gpio2: apalisgpio2grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x130b0
+		>;
+	};
+
+	pinctrl_apalis_gpio3: apalisgpio3grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x130b0
+		>;
+	};
+
+	pinctrl_apalis_gpio4: apalisgpio4grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x130b0
+		>;
+	};
+
+	pinctrl_apalis_gpio5: apalisgpio5grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x130b0
+		>;
+	};
+
+	pinctrl_apalis_gpio6: apalisgpio6grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x130b0
+		>;
+	};
+
+	pinctrl_apalis_gpio7: apalisgpio7grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x130b0
+		>;
+	};
+
+	pinctrl_apalis_gpio8: apalisgpio8grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x130b0
+		>;
+	};
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT20__AUD4_TXC	0x130b0
+			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD	0x130b0
+			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS	0x130b0
+			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD	0x130b0
+		>;
+	};
+
+	pinctrl_cam_mclk: cammclkgrp {
+		fsl,pins = <
+			/* CAM sys_mclk */
+			MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x00b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO 0x100b1
+			MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI 0x100b1
+			MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK 0x100b1
+			/* SPI1 cs */
+			MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25 0x000b1
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
+			/* SPI2 cs */
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x000b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			/* Ethernet PHY reset */
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x000b0
+			/* Ethernet PHY interrupt */
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x000b1
+		>;
+	};
+
+	pinctrl_flexcan1_default: flexcan1defgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0
+			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan1_sleep: flexcan1slpgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x0
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0
+		>;
+	};
+
+	pinctrl_flexcan2_default: flexcan2defgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0
+		>;
+	};
+	pinctrl_flexcan2_sleep: flexcan2slpgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x0
+		>;
+	};
+
+	pinctrl_gpio_bl_on: gpioblongrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_keys: gpio1io04grp {
+		fsl,pins = <
+			/* Power button */
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0
+		>;
+	};
+
+	pinctrl_hdmi_cec: hdmicecgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+		>;
+	};
+
+	pinctrl_hdmi_ddc: hdmiddcgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL 0x4001b8b1
+			MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x4001b8b1
+			MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu1_csi0: ipu1csi0grp { /* parallel camera */
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12  0xb0b1
+			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13  0xb0b1
+			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14  0xb0b1
+			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15  0xb0b1
+			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16  0xb0b1
+			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17  0xb0b1
+			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18  0xb0b1
+			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19  0xb0b1
+			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0xb0b1
+			MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC    0xb0b1
+			MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC   0xb0b1
+		>;
+	};
+
+	pinctrl_ipu1_lcdif: ipu1lcdifgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A16__IPU1_DI1_DISP_CLK	0x61
+			/* DE */
+			MX6QDL_PAD_EIM_DA10__IPU1_DI1_PIN15	0x61
+			/* HSync */
+			MX6QDL_PAD_EIM_DA11__IPU1_DI1_PIN02	0x61
+			/* VSync */
+			MX6QDL_PAD_EIM_DA12__IPU1_DI1_PIN03	0x61
+			MX6QDL_PAD_EIM_DA9__IPU1_DISP1_DATA00	0x61
+			MX6QDL_PAD_EIM_DA8__IPU1_DISP1_DATA01	0x61
+			MX6QDL_PAD_EIM_DA7__IPU1_DISP1_DATA02	0x61
+			MX6QDL_PAD_EIM_DA6__IPU1_DISP1_DATA03	0x61
+			MX6QDL_PAD_EIM_DA5__IPU1_DISP1_DATA04	0x61
+			MX6QDL_PAD_EIM_DA4__IPU1_DISP1_DATA05	0x61
+			MX6QDL_PAD_EIM_DA3__IPU1_DISP1_DATA06	0x61
+			MX6QDL_PAD_EIM_DA2__IPU1_DISP1_DATA07	0x61
+			MX6QDL_PAD_EIM_DA1__IPU1_DISP1_DATA08	0x61
+			MX6QDL_PAD_EIM_DA0__IPU1_DISP1_DATA09	0x61
+			MX6QDL_PAD_EIM_EB1__IPU1_DISP1_DATA10	0x61
+			MX6QDL_PAD_EIM_EB0__IPU1_DISP1_DATA11	0x61
+			MX6QDL_PAD_EIM_A17__IPU1_DISP1_DATA12	0x61
+			MX6QDL_PAD_EIM_A18__IPU1_DISP1_DATA13	0x61
+			MX6QDL_PAD_EIM_A19__IPU1_DISP1_DATA14	0x61
+			MX6QDL_PAD_EIM_A20__IPU1_DISP1_DATA15	0x61
+			MX6QDL_PAD_EIM_A21__IPU1_DISP1_DATA16	0x61
+			MX6QDL_PAD_EIM_A22__IPU1_DISP1_DATA17	0x61
+			MX6QDL_PAD_EIM_A23__IPU1_DISP1_DATA18	0x61
+			MX6QDL_PAD_EIM_A24__IPU1_DISP1_DATA19	0x61
+			MX6QDL_PAD_EIM_D31__IPU1_DISP1_DATA20	0x61
+			MX6QDL_PAD_EIM_D30__IPU1_DISP1_DATA21	0x61
+			MX6QDL_PAD_EIM_D26__IPU1_DISP1_DATA22	0x61
+			MX6QDL_PAD_EIM_D27__IPU1_DISP1_DATA23	0x61
+		>;
+	};
+
+	pinctrl_ipu2_vdac: ipu2vdacgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK 0xd1
+			MX6QDL_PAD_DI0_PIN15__IPU2_DI0_PIN15       0xd1
+			MX6QDL_PAD_DI0_PIN2__IPU2_DI0_PIN02        0xd1
+			MX6QDL_PAD_DI0_PIN3__IPU2_DI0_PIN03        0xd1
+			MX6QDL_PAD_DISP0_DAT0__IPU2_DISP0_DATA00   0xf9
+			MX6QDL_PAD_DISP0_DAT1__IPU2_DISP0_DATA01   0xf9
+			MX6QDL_PAD_DISP0_DAT2__IPU2_DISP0_DATA02   0xf9
+			MX6QDL_PAD_DISP0_DAT3__IPU2_DISP0_DATA03   0xf9
+			MX6QDL_PAD_DISP0_DAT4__IPU2_DISP0_DATA04   0xf9
+			MX6QDL_PAD_DISP0_DAT5__IPU2_DISP0_DATA05   0xf9
+			MX6QDL_PAD_DISP0_DAT6__IPU2_DISP0_DATA06   0xf9
+			MX6QDL_PAD_DISP0_DAT7__IPU2_DISP0_DATA07   0xf9
+			MX6QDL_PAD_DISP0_DAT8__IPU2_DISP0_DATA08   0xf9
+			MX6QDL_PAD_DISP0_DAT9__IPU2_DISP0_DATA09   0xf9
+			MX6QDL_PAD_DISP0_DAT10__IPU2_DISP0_DATA10  0xf9
+			MX6QDL_PAD_DISP0_DAT11__IPU2_DISP0_DATA11  0xf9
+			MX6QDL_PAD_DISP0_DAT12__IPU2_DISP0_DATA12  0xf9
+			MX6QDL_PAD_DISP0_DAT13__IPU2_DISP0_DATA13  0xf9
+			MX6QDL_PAD_DISP0_DAT14__IPU2_DISP0_DATA14  0xf9
+			MX6QDL_PAD_DISP0_DAT15__IPU2_DISP0_DATA15  0xf9
+		>;
+	};
+
+	pinctrl_mmc_cd: mmccdgrp {
+		fsl,pins = <
+			 /* MMC1 CD */
+			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x000b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_regulator_usbh_pwr: regusbhpwrgrp {
+		fsl,pins = <
+			/* USBH_EN */
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x0f058
+		>;
+	};
+
+	pinctrl_regulator_usbhub_pwr: regusbhubpwrgrp {
+		fsl,pins = <
+			/* USBH_HUB_EN */
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x0f058
+		>;
+	};
+
+	pinctrl_regulator_usbotg_pwr: regusbotgpwrgrp {
+		fsl,pins = <
+			/* USBO1 power en */
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x0f058
+		>;
+	};
+
+	pinctrl_reset_moci: resetmocigrp {
+		fsl,pins = <
+			/* RESET_MOCI control */
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x0f058
+		>;
+	};
+
+	pinctrl_sd_cd: sdcdgrp {
+		fsl,pins = <
+			/* SD1 CD */
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x000b0
+		>;
+	};
+
+	pinctrl_sgtl5000: sgtl5000grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__CCM_CLKO1	0x130b0
+		>;
+	};
+
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_16__SPDIF_IN  0x1b0b0
+			MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0
+		>;
+	};
+
+	pinctrl_touch_int: touchintgrp {
+		fsl,pins = <
+			/* STMPE811 interrupt */
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0
+		>;
+	};
+
+	/* Additional DTR, DSR, DCD */
+	pinctrl_uart1_ctrl: uart1ctrlgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0
+			MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0
+			MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1_dce: uart1dcegrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+		>;
+	};
+
+	/* DTE mode */
+	pinctrl_uart1_dte: uart1dtegrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x1b0b1
+			MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2_dce: uart2dcegrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+		>;
+	};
+
+	/* DTE mode */
+	pinctrl_uart2_dte: uart2dtegrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT6__UART2_RTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT5__UART2_CTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4_dce: uart4dcegrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+		>;
+	};
+
+	/* DTE mode */
+	pinctrl_uart4_dte: uart4dtegrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_RX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_TX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5_dce: uart5dcegrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
+		>;
+	};
+
+	/* DTE mode */
+	pinctrl_uart5_dte: uart5dtegrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_RX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_TX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_4bit: usdhc1-4bitgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17071
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10071
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071
+		>;
+	};
+
+	pinctrl_usdhc1_8bit: usdhc1-8bitgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D0__SD1_DATA4 0x17071
+			MX6QDL_PAD_NANDF_D1__SD1_DATA5 0x17071
+			MX6QDL_PAD_NANDF_D2__SD1_DATA6 0x17071
+			MX6QDL_PAD_NANDF_D3__SD1_DATA7 0x17071
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17071
+			MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10071
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17071
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17071
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17071
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17071
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+			/* eMMC reset */
+			MX6QDL_PAD_SD3_RST__SD3_RESET  0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-apf6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-apf6.dtsi
index b78ed7974ea9..b78ed7974ea9 100644
--- a/arch/arm/boot/dts/imx6qdl-apf6.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-apf6.dtsi
diff --git a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-apf6dev.dtsi
index 2577eb4f535a..9e97ef5e43f2 100644
--- a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-apf6dev.dtsi
@@ -13,7 +13,7 @@
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 191000>;
+		pwms = <&pwm3 0 191000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <0>;
 		power-supply = <&reg_5v>;
@@ -121,11 +121,16 @@
 		mux-ext-port = <3>;
 	};
 
+	spdif_out: spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
 	sound-spdif {
 		compatible = "fsl,imx-audio-spdif";
 		model = "imx-spdif";
-		spdif-controller = <&spdif>;
-		spdif-out;
+		audio-cpu = <&spdif>;
+		audio-codec = <&spdif_out>;
 	};
 };
 
@@ -181,6 +186,7 @@
 	codec: sgtl5000@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&reg_3p3v>;
 		VDDIO-supply = <&reg_3p3v>;
@@ -211,7 +217,6 @@
 };
 
 &pwm3 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos.dtsi
new file mode 100644
index 000000000000..acb404c6828b
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos.dtsi
@@ -0,0 +1,406 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * support fot the imx6 based aristainetos board
+ *
+ * Copyright (C) 2014 Heiko Schocher <hs@denx.de>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usbh1_vbus: regulator-usbh1-vbus {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_aristainetos_usbh1_vbus>;
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbotg_vbus: regulator-usbotg-vbus {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_aristainetos_usbotg_vbus>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	tmp103: tmp103@71 {
+		compatible = "ti,tmp103";
+		reg = <0x71>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	rtc@68 {
+		compatible = "dallas,m41t00";
+		reg = <0x68>;
+	};
+};
+
+&ecspi4 {
+	cs-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi4>;
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usbh1_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usbotg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	vmmc-supply = <&reg_3p3v>;
+	cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	vmmc-supply = <&reg_3p3v>;
+	cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog &pinctrl_gpio>;
+
+	pinctrl_aristainetos_usbh1_vbus: aristainetos-usbh1-vbusgrp {
+		fsl,pins = <MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x130b0>;
+	};
+
+	pinctrl_aristainetos_usbotg_vbus: aristainetos-usbotg-vbusgrp {
+		fsl,pins = <MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x130b0>;
+	};
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0
+		>;
+	};
+
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT	0x1b0b0
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT	0x1b0b0
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02	0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
+			MX6QDL_PAD_EIM_D24__GPIO3_IO24  0x100b1
+		>;
+	};
+
+	pinctrl_ecspi4: ecspi4grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
+			MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
+			MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20  0x100b1
+			MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x1b0b0 /* WP pin */
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO  0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC    0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN   0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER   0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN  0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX	0x1b0b0
+			MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX	0x1b0b0
+			>;
+	};
+
+	pinctrl_gpio: gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT2__GPIO2_IO10	0x1b0b0
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11	0x1b0b0
+			MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0
+			MX6QDL_PAD_SD4_DAT5__GPIO2_IO13	0x1b0b0
+			MX6QDL_PAD_GPIO_3__GPIO1_IO03	0x1b0b0
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04	0x1b0b0
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05	0x1b0b0
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06	0x1b0b0
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07	0x1b0b0
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08	0x1b0b0
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE     0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE     0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B   0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B   0xb0b1
+			MX6QDL_PAD_NANDF_CS1__NAND_CE1_B   0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B      0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B      0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00   0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01   0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02   0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03   0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04   0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05   0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06   0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07   0xb0b1
+			MX6QDL_PAD_SD4_DAT0__NAND_DQS      0x00b1
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29   0x10
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu_disp: ipudisp1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
+			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20			0x20000
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
+			>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+			MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos2.dtsi
index 563bf9d44fe0..01d4ea20b13d 100644
--- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos2.dtsi
@@ -1,44 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * support for the imx6 based aristainetos2 board
  *
  * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/imx6qdl-clock.h>
@@ -46,7 +10,7 @@
 / {
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		enable-gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>;
@@ -131,7 +95,7 @@
 	pinctrl-0 = <&pinctrl_ecspi4>;
 	status = "okay";
 
-	flash: m25p80@1 {
+	flash: flash@1 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "micron,n25q128a11", "jedec,spi-nor";
@@ -150,116 +114,118 @@
 		reg = <0x58>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <04 0x8>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
 
 		regulators {
 			bcore1 {
 				regulator-name = "bcore1";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			bcore2 {
 				regulator-name = "bcore2";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			bpro {
 				regulator-name = "bpro";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			bperi {
 				regulator-name = "bperi";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			bmem {
 				regulator-name = "bmem";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			ldo2 {
 				regulator-name = "ldo2";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <1800000>;
 			};
 
 			ldo3 {
 				regulator-name = "ldo3";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			ldo4 {
 				regulator-name = "ldo4";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			ldo5 {
 				regulator-name = "ldo5";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			ldo6 {
 				regulator-name = "ldo6";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			ldo7 {
 				regulator-name = "ldo7";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			ldo8 {
 				regulator-name = "ldo8";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			ldo9 {
 				regulator-name = "ldo9";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			ldo10 {
 				regulator-name = "ldo10";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			ldo11 {
 				regulator-name = "ldo11";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			bio {
 				regulator-name = "bio";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 			};
@@ -301,12 +267,12 @@
 	pinctrl-0 = <&pinctrl_i2c4>;
 	status = "okay";
 
-	eeprom@50{
+	eeprom@50 {
 		compatible = "atmel,24c64";
 		reg = <0x50>;
 	};
 
-	eeprom@57{
+	eeprom@57 {
 		compatible = "atmel,24c64";
 		reg = <0x57>;
 	};
@@ -324,8 +290,9 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		ethphy: ethernet-phy {
+		ethphy: ethernet-phy@0 {
 			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
 			txd0-skew-ps = <0>;
 			txd1-skew-ps = <0>;
 			txd2-skew-ps = <0>;
@@ -346,7 +313,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
@@ -414,7 +380,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpio>;
 
-	pinctrl_audmux: audmux {
+	pinctrl_audmux: audmuxgrp {
 		fsl,pins = <
 			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD  0x1b0b0
 			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC  0x1b0b0
@@ -507,7 +473,7 @@
 		>;
 	};
 
-	pinctrl_gpmi_nand: gpmi-nand {
+	pinctrl_gpmi_nand: gpminandgrp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_CLE__NAND_CLE     0xb0b1
 			MX6QDL_PAD_NANDF_ALE__NAND_ALE     0xb0b1
@@ -600,11 +566,11 @@
 		>;
 	};
 
-	pinctrl_aristainetos2_usbh1_vbus: aristainetos-usbh1-vbus {
+	pinctrl_aristainetos2_usbh1_vbus: aristainetos-usbh1-vbusgrp {
 		fsl,pins = <MX6QDL_PAD_GPIO_0__USB_H1_PWR 0x130b0>;
 	};
 
-	pinctrl_aristainetos2_usbotg_vbus: aristainetos-usbotg-vbus {
+	pinctrl_aristainetos2_usbotg_vbus: aristainetos-usbotg-vbusgrp {
 		fsl,pins = <MX6QDL_PAD_KEY_ROW4__USB_OTG_PWR 0x130b0>;
 	};
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri-v1.2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri-v1.2.dtsi
new file mode 100644
index 000000000000..d11bf911b728
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri-v1.2.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2025 Toradex */
+
+&i2c2 {
+	/delete-node/ stmpe811@41;
+
+	ad7879_ts: touchscreen@2c {
+		compatible = "adi,ad7879-1";
+		reg = <0x2c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch_int>;
+		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio6>;
+		touchscreen-max-pressure = <4096>;
+		adi,resistance-plate-x = <120>;
+		adi,first-conversion-delay = /bits/ 8 <3>;
+		adi,acquisition-time = /bits/ 8 <1>;
+		adi,median-filter-size = /bits/ 8 <2>;
+		adi,averaging = /bits/ 8 <1>;
+		adi,conversion-interval = /bits/ 8 <255>;
+	};
+
+	tla2024_adc: adc@49 {
+		compatible = "ti,tla2024";
+		reg = <0x49>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Colibri AIN0 */
+		channel@4 {
+			reg = <4>;
+			ti,datarate = <4>;
+			ti,gain = <1>;
+		};
+
+		/* Colibri AIN1 */
+		channel@5 {
+			reg = <5>;
+			ti,datarate = <4>;
+			ti,gain = <1>;
+		};
+
+		/* Colibri AIN2 */
+		channel@6 {
+			reg = <6>;
+			ti,datarate = <4>;
+			ti,gain = <1>;
+		};
+
+		/* Colibri AIN3 */
+		channel@7 {
+			reg = <7>;
+			ti,datarate = <4>;
+			ti,gain = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi
new file mode 100644
index 000000000000..8a0ce250e576
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi
@@ -0,0 +1,1322 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2014-2022 Toradex
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Toradex Colibri iMX6DL/S Module";
+
+	aliases {
+		mmc0 = &usdhc3; /* eMMC */
+		mmc1 = &usdhc1; /* MMC/SD Slot */
+		/delete-property/ mmc2;
+		/delete-property/ mmc3;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 45 63 88 119 158 203 255>;
+		default-brightness-level = <4>;
+		enable-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* Colibri BL_ON */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_bl_on>;
+		power-supply = <&reg_module_3v3>;
+		pwms = <&pwm3 0 5000000 PWM_POLARITY_INVERTED>;
+		status = "disabled";
+	};
+
+	extcon_usbc_det: usbc-det {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>; /* SODIMM 137 / USBC_DET */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbc_det>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-wakeup {
+			debounce-interval = <10>;
+			gpios = <&gpio2 22 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* SODIMM 45 */
+			label = "Wake-Up";
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+
+	lcd_display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
+		status = "disabled";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+
+	panel_dpi: panel-dpi {
+		/*
+		 * edt,et057090dhu: EDT 5.7" LCD TFT
+		 * edt,et070080dh6: EDT 7.0" LCD TFT
+		 */
+		compatible = "edt,et057090dhu";
+		backlight = <&backlight>;
+		status = "disabled";
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_module_3v3_audio: regulator-module-3v3-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_AUDIO";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_host_vbus: regulator-usb-host-vbus {
+		compatible = "regulator-fixed";
+		gpio = <&gpio3 31 GPIO_ACTIVE_LOW>; /* SODIMM 129 / USBH_PEN */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_regulator_usbh_pwr>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb_host_vbus";
+		status = "disabled";
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		audio-codec = <&codec>;
+		audio-routing =
+			"Headphone Jack", "HP_OUT",
+			"LINE_IN", "Line In Jack",
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias";
+		model = "colibri-imx6";
+		mux-int-port = <1>;
+		mux-ext-port = <5>;
+		ssi-controller = <&ssi1>;
+	};
+
+	spdif_out: spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
+	spdif_in: spdif-in {
+		compatible = "linux,spdif-dir";
+		#sound-dai-cells = <0>;
+	};
+
+	/* Optional S/PDIF in on SODIMM 88 and out on SODIMM 90, 137 or 168 */
+	sound_spdif: sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		audio-cpu = <&spdif>;
+		audio-codec = <&spdif_out>, <&spdif_in>;
+		model = "imx-spdif";
+		status = "disabled";
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux &pinctrl_mic_gnd>;
+	status = "okay";
+};
+
+/* Optional on SODIMM 55/63 */
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "disabled";
+};
+
+/* Optional on SODIMM 178/188 */
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "disabled";
+};
+
+&clks {
+	fsl,pmic-stby-poweroff;
+};
+
+/* Colibri SSP */
+&ecspi4 {
+	cs-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi4>;
+	status = "disabled";
+};
+
+&fec {
+	phy-mode = "rmii";
+	phy-handle = <&ethphy>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@0 {
+			reg = <0>;
+			micrel,led-mode = <0>;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names = "",
+			  "SODIMM_67",
+			  "SODIMM_180",
+			  "SODIMM_196",
+			  "SODIMM_174",
+			  "SODIMM_176",
+			  "SODIMM_194",
+			  "SODIMM_55",
+			  "SODIMM_63",
+			  "SODIMM_28",
+			  "SODIMM_93",
+			  "SODIMM_69",
+			  "SODIMM_99",
+			  "SODIMM_130",
+			  "SODIMM_106",
+			  "SODIMM_98",
+			  "SODIMM_192",
+			  "SODIMM_49",
+			  "SODIMM_190",
+			  "SODIMM_51",
+			  "SODIMM_47",
+			  "SODIMM_53",
+			  "",
+			  "SODIMM_22";
+};
+
+&gpio2 {
+	gpio-line-names = "SODIMM_132",
+			  "SODIMM_134",
+			  "SODIMM_135",
+			  "SODIMM_133",
+			  "SODIMM_102",
+			  "SODIMM_43",
+			  "SODIMM_127",
+			  "SODIMM_37",
+			  "SODIMM_104",
+			  "SODIMM_59",
+			  "SODIMM_30",
+			  "SODIMM_100",
+			  "SODIMM_38",
+			  "SODIMM_34",
+			  "SODIMM_32",
+			  "SODIMM_36",
+			  "SODIMM_59",
+			  "SODIMM_67",
+			  "SODIMM_97",
+			  "SODIMM_79",
+			  "SODIMM_103",
+			  "SODIMM_101",
+			  "SODIMM_45",
+			  "SODIMM_105",
+			  "SODIMM_107",
+			  "SODIMM_91",
+			  "SODIMM_89",
+			  "SODIMM_150",
+			  "SODIMM_126",
+			  "SODIMM_128",
+			  "",
+			  "SODIMM_94";
+};
+
+&gpio3 {
+	gpio-line-names = "SODIMM_111",
+			  "SODIMM_113",
+			  "SODIMM_115",
+			  "SODIMM_117",
+			  "SODIMM_119",
+			  "SODIMM_121",
+			  "SODIMM_123",
+			  "SODIMM_125",
+			  "SODIMM_110",
+			  "SODIMM_112",
+			  "SODIMM_114",
+			  "SODIMM_116",
+			  "SODIMM_118",
+			  "SODIMM_120",
+			  "SODIMM_122",
+			  "SODIMM_124",
+			  "",
+			  "SODIMM_96",
+			  "SODIMM_77",
+			  "SODIMM_25",
+			  "SODIMM_27",
+			  "SODIMM_88",
+			  "SODIMM_90",
+			  "SODIMM_31",
+			  "SODIMM_23",
+			  "SODIMM_29",
+			  "SODIMM_71",
+			  "SODIMM_73",
+			  "SODIMM_92",
+			  "SODIMM_81",
+			  "SODIMM_131",
+			  "SODIMM_129";
+};
+
+&gpio4 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_168",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_184",
+			  "SODIMM_186",
+			  "HDMI_15",
+			  "HDMI_16",
+			  "SODIMM_178",
+			  "SODIMM_188",
+			  "SODIMM_56",
+			  "SODIMM_44",
+			  "SODIMM_68",
+			  "SODIMM_82",
+			  "SODIMM_24",
+			  "SODIMM_76",
+			  "SODIMM_70",
+			  "SODIMM_60",
+			  "SODIMM_58",
+			  "SODIMM_78",
+			  "SODIMM_72",
+			  "SODIMM_80",
+			  "SODIMM_46",
+			  "SODIMM_62",
+			  "SODIMM_48",
+			  "SODIMM_74";
+};
+
+&gpio5 {
+	gpio-line-names = "SODIMM_95",
+			  "",
+			  "SODIMM_86",
+			  "",
+			  "SODIMM_65",
+			  "SODIMM_50",
+			  "SODIMM_52",
+			  "SODIMM_54",
+			  "SODIMM_66",
+			  "SODIMM_64",
+			  "SODIMM_57",
+			  "SODIMM_61",
+			  "SODIMM_136",
+			  "SODIMM_138",
+			  "SODIMM_140",
+			  "SODIMM_142",
+			  "SODIMM_144",
+			  "SODIMM_146",
+			  "SODIMM_172",
+			  "SODIMM_170",
+			  "SODIMM_149",
+			  "SODIMM_151",
+			  "SODIMM_153",
+			  "SODIMM_155",
+			  "SODIMM_157",
+			  "SODIMM_159",
+			  "SODIMM_161",
+			  "SODIMM_163",
+			  "SODIMM_33",
+			  "SODIMM_35",
+			  "SODIMM_165",
+			  "SODIMM_167";
+};
+
+&gpio6 {
+	gpio-line-names = "SODIMM_169",
+			  "SODIMM_171",
+			  "SODIMM_173",
+			  "SODIMM_175",
+			  "SODIMM_177",
+			  "SODIMM_179",
+			  "SODIMM_85",
+			  "SODIMM_166",
+			  "SODIMM_160",
+			  "SODIMM_162",
+			  "SODIMM_158",
+			  "SODIMM_164",
+			  "",
+			  "",
+			  "SODIMM_156",
+			  "SODIMM_75",
+			  "SODIMM_154",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_152";
+};
+
+&gpio7 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_19",
+			  "SODIMM_21",
+			  "",
+			  "SODIMM_137";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi_ddc>;
+	status = "disabled";
+};
+
+/*
+ * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
+ * touch screen controller
+ */
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio2 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze100";
+		fsl,pmic-stby-poweroff;
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1875000>;
+				regulator-min-microvolt = <300000>;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1875000>;
+				regulator-min-microvolt = <300000>;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1975000>;
+				regulator-min-microvolt = <400000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <5150000>;
+				regulator-min-microvolt = <5000000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3000000>;
+				regulator-min-microvolt = <1000000>;
+			};
+
+			vref_reg: vrefddr {
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* vgen1: unused */
+
+			vgen2_reg: vgen2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1550000>;
+				regulator-min-microvolt = <800000>;
+			};
+
+			/*
+			 * +V3.3_1.8_SD1 coming off VGEN3 and supplying
+			 * the i.MX 6 NVCC_SD1.
+			 */
+			vgen3_reg: vgen3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+			};
+		};
+	};
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		lrclk-strength = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_module_3v3_audio>;
+		VDDIO-supply = <&reg_module_3v3>;
+		VDDD-supply = <&vgen4_reg>;
+	};
+
+	/* STMPE811 touch screen controller */
+	stmpe811@41 {
+		compatible = "st,stmpe811";
+		blocks = <0x5>;
+		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio6>;
+		id = <0>;
+		irq-trigger = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch_int>;
+		reg = <0x41>;
+		/* 3.25 MHz ADC clock speed */
+		st,adc-freq = <1>;
+		/* 12-bit ADC */
+		st,mod-12b = <1>;
+		/* internal ADC reference */
+		st,ref-sel = <0>;
+		/* ADC converstion time: 80 clocks */
+		st,sample-time = <4>;
+
+		stmpe_ts: touchscreen {
+			compatible = "st,stmpe-ts";
+			/* 8 sample average control */
+			st,ave-ctrl = <3>;
+			/* 7 length fractional part in z */
+			st,fraction-z = <7>;
+			/*
+			 * 50 mA typical 80 mA max touchscreen drivers
+			 * current limit value
+			 */
+			st,i-drive = <1>;
+			/* 1 ms panel driver settling time */
+			st,settling = <3>;
+			/* 5 ms touch detect interrupt delay */
+			st,touch-det-delay = <5>;
+		};
+
+		stmpe_adc: adc {
+			compatible = "st,stmpe-adc";
+			/* forbid to use ADC channels 3-0 (touch) */
+			st,norequest-mask = <0x0F>;
+		};
+	};
+};
+
+/*
+ * I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board)
+ */
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "disabled";
+
+	atmel_mxt_ts: touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		interrupt-parent = <&gpio2>;
+		interrupts = <24 IRQ_TYPE_EDGE_FALLING>;	/* SODIMM 107 */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_atmel_conn>;
+		reg = <0x4a>;
+		reset-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;	/* SODIMM 106 */
+		status = "disabled";
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+/* Colibri PWM<B> */
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "disabled";
+};
+
+/* Colibri PWM<D> */
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "disabled";
+};
+
+/* Colibri PWM<A> */
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "disabled";
+};
+
+/* Colibri PWM<C> */
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "disabled";
+};
+
+/* Optional S/PDIF out on SODIMM 137 */
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	status = "disabled";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+/* Colibri UART_A */
+&uart1 {
+	fsl,dte-mode;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+/* Colibri UART_B */
+&uart2 {
+	fsl,dte-mode;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_dte>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+/* Colibri UART_C */
+&uart3 {
+	fsl,dte-mode;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_dte>;
+	status = "disabled";
+};
+
+/* Colibri USBH */
+&usbh1 {
+	vbus-supply = <&reg_usb_host_vbus>;
+};
+
+/* Colibri USBC */
+&usbotg {
+	dr_mode = "otg";
+	extcon = <0>, <&extcon_usbc_det>;
+	status = "disabled";
+};
+
+/* Colibri MMC */
+&usdhc1 {
+	cd-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* MMCD */
+	bus-width = <4>;
+	no-1-8-v;
+	disable-wp;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_mmc_cd>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_mmc_cd>;
+	pinctrl-3 = <&pinctrl_usdhc1_sleep &pinctrl_mmc_cd_sleep>;
+	vmmc-supply = <&reg_module_3v3>;
+	vqmmc-supply = <&vgen3_reg>;
+	status = "disabled";
+};
+
+/* eMMC */
+&usdhc3 {
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	vqmmc-supply = <&reg_module_3v3>;
+	status = "okay";
+};
+
+&weim {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_weim_sram  &pinctrl_weim_cs0
+		     &pinctrl_weim_cs1   &pinctrl_weim_cs2
+		     &pinctrl_weim_rdnwr &pinctrl_weim_npwe>;
+	#address-cells = <2>;
+	#size-cells = <1>;
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh_oc_1>;
+
+	/* Atmel MXT touchsceen + Capacitive Touch Adapter */
+	/* NOTE: This pin group conflicts with pin groups
+	 * pinctrl_pwm1/pinctrl_pwm4. Don't use them simultaneously.
+	 */
+	pinctrl_atmel_adap: atmeladaptergrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09   0xb0b1  /* SODIMM  28 */
+			MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0xb0b1  /* SODIMM  30 */
+		>;
+	};
+
+	/* Atmel MXT touchsceen + boards with built-in Capacitive Touch Connector */
+	/* NOTE: This pin group conflicts with pin groups pinctrl_weim_cs1 and
+	 * pinctrl_weim_cs2. Don't use them simultaneously.
+	 */
+	pinctrl_atmel_conn: atmelconnectorgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_CS1__GPIO2_IO24  0xb0b1  /* SODIMM_107 */
+			MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0xb0b1  /* SODIMM_106 */
+		>;
+	};
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__AUD5_TXC	0x130b0
+			MX6QDL_PAD_KEY_ROW0__AUD5_TXD	0x130b0
+			MX6QDL_PAD_KEY_COL1__AUD5_TXFS	0x130b0
+			MX6QDL_PAD_KEY_ROW1__AUD5_RXD	0x130b0
+		>;
+	};
+
+	pinctrl_cam_mclk: cammclkgrp {
+		fsl,pins = <
+			/* Parallel Camera CAM sys_mclk */
+			MX6QDL_PAD_NANDF_CS2__CCM_CLKO2	0x00b0
+		>;
+	};
+
+	/* CSI pins used as GPIOs */
+	pinctrl_csi_gpio_1: csigpio1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D18__GPIO3_IO18   0x1b0b0
+			MX6QDL_PAD_EIM_A19__GPIO2_IO19   0x1b0b0
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29   0x130b0
+			MX6QDL_PAD_EIM_A23__GPIO6_IO06   0x1b0b0
+			MX6QDL_PAD_EIM_A20__GPIO2_IO18   0x1b0b0
+			MX6QDL_PAD_EIM_A17__GPIO2_IO21   0x1b0b0
+			MX6QDL_PAD_EIM_A18__GPIO2_IO20   0x1b0b0
+			MX6QDL_PAD_EIM_EB3__GPIO2_IO31   0x1b0b0
+			MX6QDL_PAD_EIM_D17__GPIO3_IO17   0x1b0b0
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0
+			MX6QDL_PAD_SD2_CMD__GPIO1_IO11   0x1b0b0
+			MX6QDL_PAD_SD2_DAT0__GPIO1_IO15  0x1b0b0
+		>;
+	};
+
+	pinctrl_csi_gpio_2: csigpio2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A24__GPIO5_IO04   0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi4: ecspi4grp {
+		fsl,pins = <
+			/* SPI CS */
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02	0x000b1
+			MX6QDL_PAD_EIM_D22__ECSPI4_MISO	0x100b1
+			MX6QDL_PAD_EIM_D28__ECSPI4_MOSI	0x100b1
+			MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	((1<<30) | 0x1b0b0)
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX		0x1b0b0
+			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX		0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_1: gpio1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20     0x1b0b0
+			MX6QDL_PAD_EIM_D27__GPIO3_IO27      0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23 0x1b0b0
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03     0x1b0b0
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04     0x1b0b0
+			MX6QDL_PAD_NANDF_D6__GPIO2_IO06     0x1b0b0
+			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08     0x1b0b0
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11     0x1b0b0
+		>;
+	};
+	pinctrl_gpio_2: gpio2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07       0x1b0b0
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08       0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_bl_on: gpioblongrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__GPIO3_IO26		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x130b0
+		>;
+	};
+
+	pinctrl_hdmi_ddc: hdmiddcgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL 0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
+			MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x4001b8b1
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x4001b8b1
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu1_csi0: ipu1csi0grp { /* Parallel Camera */
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12	0xb0b1
+			MX6QDL_PAD_EIM_A18__IPU1_CSI1_DATA13	0xb0b1
+			MX6QDL_PAD_EIM_A19__IPU1_CSI1_DATA14	0xb0b1
+			MX6QDL_PAD_EIM_A20__IPU1_CSI1_DATA15	0xb0b1
+			MX6QDL_PAD_EIM_A21__IPU1_CSI1_DATA16	0xb0b1
+			MX6QDL_PAD_EIM_A22__IPU1_CSI1_DATA17	0xb0b1
+			MX6QDL_PAD_EIM_A23__IPU1_CSI1_DATA18	0xb0b1
+			MX6QDL_PAD_EIM_A24__IPU1_CSI1_DATA19	0xb0b1
+			MX6QDL_PAD_EIM_D17__IPU1_CSI1_PIXCLK	0xb0b1
+			MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC	0xb0b1
+			MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC	0xb0b1
+			/* Disable PWM pins on camera interface */
+			MX6QDL_PAD_GPIO_1__GPIO1_IO01		0x40
+			MX6QDL_PAD_SD4_DAT1__GPIO2_IO09		0x40
+		>;
+	};
+
+	pinctrl_ipu1_lcdif: ipu1lcdifgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0xa1
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0xa1
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0xa1
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0xa1
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0xa1
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0xa1
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0xa1
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0xa1
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0xa1
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0xa1
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0xa1
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0xa1
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0xa1
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0xa1
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0xa1
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0xa1
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0xa1
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0xa1
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0xa1
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0xa1
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0xa1
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0xa1
+		>;
+	};
+
+	pinctrl_lvds_transceiver: lvdstxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x03030 /* SODIMM  95 */
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07   0x0b030 /* SODIMM  55 */
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08   0x03030 /* SODIMM  63 */
+			MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x03030 /* SODIMM  99 */
+		>;
+	};
+
+	pinctrl_mic_gnd: micgndgrp {
+		fsl,pins = <
+			/* Controls Mic GND, PU or '1' pull Mic GND to GND */
+			MX6QDL_PAD_RGMII_TD1__GPIO6_IO21 0x1b0b0
+		>;
+	};
+
+	pinctrl_mmc_cd: mmccdgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D5__GPIO2_IO05	0x1b0b1
+		>;
+	};
+
+	pinctrl_mmc_cd_sleep: mmccdslpgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D5__GPIO2_IO05	0x0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A21__GPIO2_IO17	0x00040
+			MX6QDL_PAD_GPIO_1__PWM2_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A22__GPIO2_IO16	0x00040
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT2__PWM4_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_regulator_usbh_pwr: gpioregusbhpwrgrp {
+		fsl,pins = <
+			/* SODIMM 129 / USBH_PEN */
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31	0x0f058
+		>;
+	};
+
+	pinctrl_sgtl5000: sgtl5000grp {
+		fsl,pins = <
+			/* SGTL5000 sys_mclk */
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1	0x000b0
+		>;
+	};
+
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0
+		>;
+	};
+
+	pinctrl_touch_int: gpiotouchintgrp {
+		fsl,pins = <
+			/* STMPE811 interrupt */
+			MX6QDL_PAD_RGMII_TD0__GPIO6_IO20 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1_dce: uart1dcegrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+		>;
+	};
+
+	/* DTE mode */
+	pinctrl_uart1_dte: uart1dtegrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D19__UART1_RTS_B	0x1b0b1
+			MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x1b0b1
+		>;
+	};
+
+	/* Additional DTR, DSR, DCD */
+	pinctrl_uart1_ctrl: uart1ctrlgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0
+			MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0
+			MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart2_dte: uart2dtegrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT5__UART2_CTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT6__UART2_RTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3_dte: uart3dtegrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CLK__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_CMD__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbc_det: usbcdetgrp {
+		fsl,pins = <
+			/* SODIMM 137 / USBC_DET */
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
+			/* USBC_DET_OVERWRITE */
+			MX6QDL_PAD_RGMII_RXC__GPIO6_IO30	0x0f058
+			/* USBC_DET_EN */
+			MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26	0x0f058
+		>;
+	};
+
+	pinctrl_usbc_id_1: usbcid1grp {
+		fsl,pins = <
+			/* USBC_ID */
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
+		>;
+	};
+
+	pinctrl_usbh_oc_1: usbhoc1grp {
+		fsl,pins = <
+			/* USBH_OC */
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30		0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x17071
+			MX6QDL_PAD_SD1_CLK__SD1_CLK	0x10071
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0	0x17071
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1	0x17071
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2	0x17071
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3	0x17071
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x170b1
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x100b1
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170b1
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170b1
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170b1
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170b1
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x170f1
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x100f1
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f1
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f1
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f1
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f1
+		>;
+	};
+
+	/* avoid backfeeding with removed card power */
+	pinctrl_usdhc1_sleep: usdhc1sleepgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x3000
+			MX6QDL_PAD_SD1_CLK__SD1_CLK	0x3000
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0	0x3000
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1	0x3000
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2	0x3000
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3	0x3000
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4	0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5	0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6	0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7	0x17059
+			/* eMMC reset */
+			MX6QDL_PAD_SD3_RST__SD3_RESET	0x17059
+		>;
+	};
+
+	pinctrl_weim_cs0: weimcs0grp {
+		fsl,pins = <
+			/* nEXT_CS0 */
+			MX6QDL_PAD_EIM_CS0__EIM_CS0_B	0xb0b1
+		>;
+	};
+
+	pinctrl_weim_cs1: weimcs1grp {
+		fsl,pins = <
+			/* nEXT_CS1 */
+			MX6QDL_PAD_EIM_CS1__EIM_CS1_B	0xb0b1
+		>;
+	};
+
+	pinctrl_weim_cs2: weimcs2grp {
+		fsl,pins = <
+			/* nEXT_CS2 */
+			MX6QDL_PAD_SD2_DAT1__EIM_CS2_B	0xb0b1
+		>;
+	};
+
+	/* ADDRESS[16:18] [25] used as GPIO */
+	pinctrl_weim_gpio_1: weimgpio1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x1b0b0
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+		>;
+	};
+
+	/* ADDRESS[19:24] used as GPIO */
+	pinctrl_weim_gpio_2: weimgpio2grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b0b0
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+		>;
+	};
+
+	/* DATA[16:31] used as GPIO */
+	pinctrl_weim_gpio_3: weimgpio3grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19	0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x1b0b0
+			MX6QDL_PAD_EIM_LBA__GPIO2_IO27		0x1b0b0
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0x1b0b0
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x1b0b0
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
+			MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x1b0b0
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x1b0b0
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x1b0b0
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x1b0b0
+			MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x1b0b0
+			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10	0x1b0b0
+			MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09	0x1b0b0
+		>;
+	};
+
+	/* DQM[0:3] used as GPIO */
+	pinctrl_weim_gpio_4: weimgpio4grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0x1b0b0
+			MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x1b0b0
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x1b0b0
+			MX6QDL_PAD_SD2_DAT2__GPIO1_IO13		0x1b0b0
+		>;
+	};
+
+	/* RDY used as GPIO */
+	pinctrl_weim_gpio_5: weimgpio5grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0x1b0b0
+		>;
+	};
+
+	/* ADDRESS[16] DATA[30] used as GPIO */
+	pinctrl_weim_gpio_6: weimgpio6grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+		>;
+	};
+
+	pinctrl_weim_npwe: weimnpwegrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_TD2__GPIO6_IO22	0x130b0
+			MX6QDL_PAD_SD2_DAT3__GPIO1_IO12		0x0040
+		>;
+	};
+
+	pinctrl_weim_sram: weimsramgrp {
+		fsl,pins = <
+			/* Data */
+			MX6QDL_PAD_CSI0_DAT4__EIM_DATA02	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT5__EIM_DATA03	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT6__EIM_DATA04	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT7__EIM_DATA05	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT8__EIM_DATA06	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT9__EIM_DATA07	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT12__EIM_DATA08	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__EIM_DATA09	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__EIM_DATA10	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__EIM_DATA11	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__EIM_DATA12	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__EIM_DATA13	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__EIM_DATA14	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__EIM_DATA15	0x1b0b0
+			MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00	0x1b0b0
+			MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01	0x1b0b0
+			/* Address */
+			MX6QDL_PAD_EIM_DA0__EIM_AD00		0xb0b1
+			MX6QDL_PAD_EIM_DA1__EIM_AD01		0xb0b1
+			MX6QDL_PAD_EIM_DA2__EIM_AD02		0xb0b1
+			MX6QDL_PAD_EIM_DA3__EIM_AD03		0xb0b1
+			MX6QDL_PAD_EIM_DA4__EIM_AD04		0xb0b1
+			MX6QDL_PAD_EIM_DA5__EIM_AD05		0xb0b1
+			MX6QDL_PAD_EIM_DA6__EIM_AD06		0xb0b1
+			MX6QDL_PAD_EIM_DA7__EIM_AD07		0xb0b1
+			MX6QDL_PAD_EIM_DA8__EIM_AD08		0xb0b1
+			MX6QDL_PAD_EIM_DA9__EIM_AD09		0xb0b1
+			MX6QDL_PAD_EIM_DA10__EIM_AD10		0xb0b1
+			MX6QDL_PAD_EIM_DA11__EIM_AD11		0xb0b1
+			MX6QDL_PAD_EIM_DA12__EIM_AD12		0xb0b1
+			MX6QDL_PAD_EIM_DA13__EIM_AD13		0xb0b1
+			MX6QDL_PAD_EIM_DA14__EIM_AD14		0xb0b1
+			MX6QDL_PAD_EIM_DA15__EIM_AD15		0xb0b1
+			/* Ctrl */
+			MX6QDL_PAD_EIM_OE__EIM_OE_B		0xb0b1
+			MX6QDL_PAD_EIM_RW__EIM_RW		0xb0b1
+		>;
+	};
+
+	pinctrl_weim_rdnwr: weimrdnwrgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_TD3__GPIO6_IO23	0x130b0
+			MX6QDL_PAD_SD2_CLK__GPIO1_IO10		0x0040
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi
new file mode 100644
index 000000000000..c504cf7e9492
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi
@@ -0,0 +1,272 @@
+/*
+ * Copyright (C) 2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+
+	ir_recv: ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio3 9 1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cubox_i_ir>;
+	};
+
+	led-controller {
+		compatible = "pwm-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cubox_i_pwm1>;
+
+		led-1 {
+			active-low;
+			label = "imx6:red:front";
+			max-brightness = <248>;
+			pwms = <&pwm1 0 50000 0>;
+		};
+	};
+
+	v_5v0: regulator-v-5v0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_5v0";
+	};
+
+	v_usb2: regulator-v-usb2 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cubox_i_usbh1_vbus>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb2";
+		vin-supply = <&v_5v0>;
+	};
+
+	v_usb1: regulator-v-usb1 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cubox_i_usbotg_vbus>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb1";
+		vin-supply = <&v_5v0>;
+	};
+
+	spdif_out: spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "Integrated SPDIF";
+		/* IMX6 doesn't implement this yet */
+		audio-cpu = <&spdif>;
+		audio-codec = <&spdif_out>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pinctrl_gpio_key>;
+		pinctrl-names = "default";
+
+		button-0 {
+			label = "Button 0";
+			gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+	};
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cubox_i_hdmi>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cubox_i_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cubox_i_i2c3>;
+
+	status = "okay";
+
+	rtc@68 {
+		compatible = "nxp,pcf8523";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl_cubox_i_hdmi: cubox-i-hdmigrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+		>;
+	};
+
+	pinctrl_cubox_i_i2c2: cubox-i-i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_cubox_i_i2c3: cubox-i-i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_cubox_i_ir: cubox-i-irgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000
+		>;
+	};
+
+	pinctrl_cubox_i_pwm1: cubox-i-pwm1-front-ledgrp {
+		fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0>;
+	};
+
+	pinctrl_cubox_i_spdif: cubox-i-spdifgrp {
+		fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
+	};
+
+	pinctrl_cubox_i_usbh1: cubox-i-usbh1grp {
+		fsl,pins = <MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b0>;
+	};
+
+	pinctrl_cubox_i_usbh1_vbus: cubox-i-usbh1-vbusgrp {
+		fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x4001b0b0>;
+	};
+
+	pinctrl_cubox_i_usbotg: cubox-i-usbotggrp {
+		/*
+		 * The Cubox-i pulls ID low, but as it's pointless
+		 * leaving it as a pull-up, even if it is just 10uA.
+		 */
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059
+			MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
+		>;
+	};
+
+	pinctrl_cubox_i_usbotg_vbus: cubox-i-usbotg-vbusgrp {
+		fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x4001b0b0>;
+	};
+
+	pinctrl_cubox_i_usdhc2_aux: cubox-i-usdhc2-auxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04    0x1f071
+			MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b071
+		>;
+	};
+
+	pinctrl_cubox_i_usdhc2: cubox-i-usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
+		>;
+	};
+
+	pinctrl_gpio_key: gpio-keygrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA8__GPIO3_IO08	0x17059
+		>;
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cubox_i_spdif>;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cubox_i_usbh1>;
+	vbus-supply = <&v_usb2>;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cubox_i_usbotg>;
+	vbus-supply = <&v_usb1>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cubox_i_usdhc2_aux &pinctrl_cubox_i_usdhc2>;
+	vmmc-supply = <&vcc_3v3>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&vcc_3v3 {
+	vin-supply = <&v_5v0>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-dfi-fs700-m60.dtsi
new file mode 100644
index 000000000000..f560a6b7779a
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-dfi-fs700-m60.dtsi
@@ -0,0 +1,191 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	dummy_reg: regulator-dummy {
+		compatible = "regulator-fixed";
+		regulator-name = "dummy-supply";
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 0>;
+		enable-active-high;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "sst,sst25vf040b", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	status = "okay";
+	phy-mode = "rgmii";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x80000000 /* PMIC irq */
+			MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x80000000 /* MAX11801 irq */
+			MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x000030b0 /* Backlight enable */
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D16__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000 /* card detect */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */
+		>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc2 { /* module slot */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usdhc3 { /* baseboard slot */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+};
+
+&usdhc4 { /* eMMC */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-dhcom-drc02.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-drc02.dtsi
index 3d0a50a9ab21..702cd4a1b2e6 100644
--- a/arch/arm/boot/dts/imx6qdl-dhcom-drc02.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-drc02.dtsi
@@ -95,6 +95,10 @@
 	rts-gpios = <&gpio7 13 GPIO_ACTIVE_HIGH>; /* GPIO P */
 };
 
+&usbh1 {
+	disable-over-current;
+};
+
 &usdhc2 { /* SD card */
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-pdk2.dtsi
index dc21853706a5..d7c2b30aecfd 100644
--- a/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-pdk2.dtsi
@@ -4,7 +4,10 @@
  * Copyright (C) 2018 Marek Vasut <marex@denx.de>
  */
 
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
 
 / {
 	chosen {
@@ -53,7 +56,6 @@
 	};
 
 	gpio-keys {
-		#size-cells = <0>;
 		compatible = "gpio-keys";
 
 		button-0 {
@@ -141,6 +143,7 @@
 	panel {
 		backlight = <&display_bl>;
 		compatible = "edt,etm0700g0edh6";
+		power-supply = <&reg_panel_3v3>;
 
 		port {
 			lcd_panel_in: endpoint {
@@ -149,6 +152,25 @@
 		};
 	};
 
+	/* Filtered supply voltage */
+	reg_pdk2_24v: regulator-pdk2-24v {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <24000000>;
+		regulator-min-microvolt = <24000000>;
+		regulator-name = "24V_PDK2";
+	};
+
+	/* 560-200 U1 */
+	reg_panel_3v3: regulator-panel-3v3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "3V3_PANEL";
+		vin-supply = <&reg_pdk2_24v>;
+	};
+
 	sound {
 		audio-codec = <&sgtl5000>;
 		audio-routing =
@@ -260,6 +282,10 @@
 	status = "okay";
 };
 
+&usbh1 {
+	disable-over-current;
+};
+
 &usdhc2 { /* SD card */
 	status = "okay";
 };
@@ -325,37 +351,4 @@
 			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0xb1 /* Int */
 		>;
 	};
-
-	pinctrl_ipu1_lcdif: ipu1-lcdif-grp {
-		fsl,pins = <
-			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x38
-			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x38
-			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x38
-			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x38
-			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x38
-			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x38
-			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x38
-			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x38
-			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x38
-			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x38
-			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x38
-			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x38
-			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x38
-			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x38
-			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x38
-			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x38
-			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x38
-			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x38
-			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x38
-			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x38
-			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x38
-			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x38
-			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x38
-			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x38
-			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x38
-			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x38
-			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x38
-			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x38
-		>;
-	};
 };
diff --git a/arch/arm/boot/dts/imx6qdl-dhcom-picoitx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-picoitx.dtsi
index 4cd4cb9543c8..4cd4cb9543c8 100644
--- a/arch/arm/boot/dts/imx6qdl-dhcom-picoitx.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-picoitx.dtsi
diff --git a/arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-som.dtsi
index 5d10c40313cb..af0d95396cd5 100644
--- a/arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-dhcom-som.dtsi
@@ -132,14 +132,15 @@
 		#size-cells = <0>;
 
 		ethphy0: ethernet-phy@0 { /* SMSC LAN8710Ai */
-			compatible = "ethernet-phy-ieee802.3-c22";
+			compatible = "ethernet-phy-id0007.c0f0",
+				     "ethernet-phy-ieee802.3-c22";
 			interrupt-parent = <&gpio4>;
 			interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
 			pinctrl-0 = <&pinctrl_ethphy0>;
 			pinctrl-names = "default";
 			reg = <0>;
-			reset-assert-us = <1000>;
-			reset-deassert-us = <1000>;
+			reset-assert-us = <500>;
+			reset-deassert-us = <500>;
 			reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
 			smsc,disable-energy-detect; /* Make plugin detection reliable */
 		};
@@ -255,7 +256,6 @@
 				regulator-max-microvolt = <1527272>;
 				regulator-min-microvolt = <787500>;
 				regulator-ramp-delay = <7000>;
-				regulator-suspend-mem-microvolt = <1040000>;
 			};
 
 			sw2_reg: sw2 {
@@ -274,7 +274,6 @@
 				regulator-max-microvolt = <1527272>;
 				regulator-min-microvolt = <787500>;
 				regulator-ramp-delay = <7000>;
-				regulator-suspend-mem-microvolt = <980000>;
 			};
 
 			sw4_reg: sw4 {
@@ -666,6 +665,39 @@
 		>;
 	};
 
+	pinctrl_ipu1_lcdif: ipu1-lcdif-grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x38
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x38
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x38
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x38
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x38
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x38
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x38
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x38
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x38
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x38
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x38
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x38
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x38
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x38
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x38
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x38
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x38
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x38
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x38
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x38
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x38
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x38
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x38
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x38
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x38
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x38
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x38
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x38
+		>;
+	};
+
 	pinctrl_pcie: pcie-grp {
 		fsl,pins = <
 			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x1b0b1 /* Wake */
@@ -728,6 +760,7 @@
 	pinctrl_usbh1: usbh1-grp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x120b0
+			MX6QDL_PAD_EIM_D30__USB_H1_OC		0x1b0b1
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/imx6qdl-ds.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-ds.dtsi
index f7e517555697..99ebd4dd63e8 100644
--- a/arch/arm/boot/dts/imx6qdl-ds.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-ds.dtsi
@@ -253,7 +253,7 @@
 		>;
 	};
 
-	pinctrl_ecspi1_gpio: ecspi1grpgpiogrp {
+	pinctrl_ecspi1_gpio: ecspi1gpiogrp {
 		fsl,pins = <
 			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09		0x1b0b0
 			MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x1b0b0
@@ -349,7 +349,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_gpio: usdhc1grpgpiogrp {
+	pinctrl_usdhc1_gpio: usdhc1gpiogrp {
 		fsl,pins = <
 			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
 		>;
@@ -366,7 +366,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_gpio: usdhc2grpgpiogrp {
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x1b0b0
 			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
diff --git a/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon-avari.dtsi
index c4e146f3341b..5587069b6052 100644
--- a/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon-avari.dtsi
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0 or MIT)
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
 //
 // Copyright (C) 2018 emtrion GmbH
 //
@@ -54,7 +54,7 @@
 	clk_codec: clock-codec {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency  = <12000000>;
+		clock-frequency = <12000000>;
 	};
 
 	sound {
diff --git a/arch/arm/boot/dts/imx6qdl-emcon.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi
index 7228b894a763..9f4e746beb2d 100644
--- a/arch/arm/boot/dts/imx6qdl-emcon.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0 or MIT)
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
 //
 // Copyright (C) 2018 emtrion GmbH
 //
@@ -33,7 +33,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_emcon_wake>;
 
-		wake {
+		key-wake {
 			label = "Wake";
 			linux,code = <KEY_WAKEUP>;
 			gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
@@ -46,14 +46,14 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_som_leds>;
 
-		green {
+		led-green {
 			label = "som:green";
 			gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 			default-state = "on";
 		};
 
-		red {
+		led-red {
 			label = "som:red";
 			gpios = <&gpio3 1 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
@@ -66,7 +66,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_lvds_bl>;
 		enable-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>;
-		pwms = <&pwm1 0 50000>;
+		pwms = <&pwm1 0 50000 0>;
 		brightness-levels = <
 			0 4 8 16 32 64 80 96 112
 			128 144 160 176 250
@@ -78,7 +78,7 @@
 	pwm_fan: pwm-fan {
 		compatible = "pwm-fan";
 		#cooling-cells = <2>;
-		pwms = <&pwm4 0 50000>;
+		pwms = <&pwm4 0 50000 0>;
 		cooling-levels = <0 64 127 191 255>;
 		status = "disabled";
 	};
@@ -145,7 +145,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_rgb_bl>;
 		enable-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
-		pwms = <&pwm3 0 5000000>;
+		pwms = <&pwm3 0 5000000 0>;
 		brightness-levels = <
 			250 176 160 144 128 112
 			96 80 64 48 32 16 8 1
@@ -226,6 +226,7 @@
 		interrupt-parent = <&gpio2>;
 		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		onkey {
 			compatible = "dlg,da9063-onkey";
@@ -331,7 +332,6 @@
 };
 
 &iomuxc {
-
 	pinctrl_audmux: audmuxgrp {
 		fsl,pins = <
 			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD			0x130b0
@@ -383,79 +383,79 @@
 		>;
 	};
 
-	pinctrl_emcon_gpio1: emcongpio1 {
+	pinctrl_emcon_gpio1: emcongpio1grp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_D0__GPIO2_IO00			0x0b0b1
 		>;
 	};
 
-	pinctrl_emcon_gpio2: emcongpio2 {
+	pinctrl_emcon_gpio2: emcongpio2grp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_D1__GPIO2_IO01			0x0b0b1
 		>;
 	};
 
-	pinctrl_emcon_gpio3: emcongpio3 {
+	pinctrl_emcon_gpio3: emcongpio3grp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_D2__GPIO2_IO02			0x0b0b1
 		>;
 	};
 
-	pinctrl_emcon_gpio4: emcongpio4 {
+	pinctrl_emcon_gpio4: emcongpio4grp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_D3__GPIO2_IO03			0x0b0b1
 		>;
 	};
 
-	pinctrl_emcon_gpio5: emcongpio5 {
+	pinctrl_emcon_gpio5: emcongpio5grp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_D4__GPIO2_IO04			0x0b0b1
 		>;
 	};
 
-	pinctrl_emcon_gpio6: emcongpio6 {
+	pinctrl_emcon_gpio6: emcongpio6grp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_D5__GPIO2_IO05			0x0b0b1
 		>;
 	};
 
-	pinctrl_emcon_gpio7: emcongpio7 {
+	pinctrl_emcon_gpio7: emcongpio7grp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_D6__GPIO2_IO06			0x0b0b1
 		>;
 	};
 
-	pinctrl_emcon_gpio8: emcongpio8 {
+	pinctrl_emcon_gpio8: emcongpio8grp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_D7__GPIO2_IO07			0x0b0b1
 		>;
 	};
 
-	pinctrl_emcon_irq_a: emconirqa {
+	pinctrl_emcon_irq_a: emconirqagrp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_CLE__GPIO6_IO07		0x0b0b1
 		>;
 	};
 
-	pinctrl_emcon_irq_b: emconirqb {
+	pinctrl_emcon_irq_b: emconirqbgrp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15		0x0b0b1
 		>;
 	};
 
-	pinctrl_emcon_irq_c: emconirqc {
+	pinctrl_emcon_irq_c: emconirqcgrp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16		0x0b0b1
 		>;
 	};
 
-	pinctrl_emcon_irq_pwr: emconirqpwr {
+	pinctrl_emcon_irq_pwr: emconirqpwrgrp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D23__GPIO3_IO23			0x0b0b1
 		>;
 	};
 
-	pinctrl_emcon_wake: emconwake {
+	pinctrl_emcon_wake: emconwakegrp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_DA2__GPIO3_IO02			0x1b0b1
 		>;
@@ -504,13 +504,13 @@
 		>;
 	};
 
-	pinctrl_irq_touch1: irqtouch1 {
+	pinctrl_irq_touch1: irqtouch1grp {
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_5__GPIO1_IO05			0x0b0b1
 		>;
 	};
 
-	pinctrl_irq_touch2: irqtouch2 {
+	pinctrl_irq_touch2: irqtouch2grp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31			0x0b0b1
 		>;
@@ -553,7 +553,7 @@
 		>;
 	};
 
-	pinctrl_pwm_fan: pwmfan {
+	pinctrl_pwm_fan: pwmfangrp {
 		fsl,pins = <
 			MX6QDL_PAD_SD4_DAT2__PWM4_OUT			0x0b0b1
 		>;
@@ -566,7 +566,7 @@
 		>;
 	};
 
-	pinctrl_rgb_bl_en: rgbenable {
+	pinctrl_rgb_bl_en: rgbenablegrp {
 		fsl,pins = <
 			MX6QDL_PAD_SD4_CMD__GPIO7_IO09			0x0b0b1
 		>;
@@ -618,13 +618,13 @@
 		>;
 	};
 
-	pinctrl_spdif_in: spdifin {
+	pinctrl_spdif_in: spdifingrp {
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_16__SPDIF_IN			0x1b0b0
 		>;
 	};
 
-	pinctrl_spdif_out: spdifout {
+	pinctrl_spdif_out: spdifoutgrp {
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_19__SPDIF_OUT			0x13091
 		>;
@@ -737,17 +737,14 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	status = "okay";
 };
 
 &pwm3 {
-	#pwm-cells = <2>;
 	status = "okay";
 };
 
 &pwm4 {
-	#pwm-cells = <2>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw51xx.dtsi
index 069c27fab432..beff5a0f58ab 100644
--- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw51xx.dtsi
@@ -24,13 +24,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -44,21 +44,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -71,14 +71,14 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
@@ -156,6 +156,7 @@
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		adc {
@@ -270,7 +271,7 @@
 		pagesize = <16>;
 	};
 
-	rtc: ds1672@68 {
+	rtc: rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw52xx.dtsi
index b1df2beb2832..9d3ba4083216 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw52xx.dtsi
@@ -25,7 +25,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
+		pwms = <&pwm4 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 	};
@@ -33,13 +33,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -53,21 +53,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -80,20 +80,20 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
 		};
 
-		led2: user3 {
+		led2: led-user3 {
 			label = "user3";
 			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
 			default-state = "off";
@@ -137,6 +137,16 @@
 		regulator-always-on;
 	};
 
+	reg_can1_stby: regulator-can1-stby {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_can1>;
+		regulator-name = "can1_stby";
+		gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	reg_usb_otg_vbus: regulator-usb-otg-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb_otg_vbus";
@@ -170,6 +180,7 @@
 &can1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can1_stby>;
 	status = "okay";
 };
 
@@ -219,6 +230,7 @@
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		adc {
@@ -339,7 +351,7 @@
 		pagesize = <16>;
 	};
 
-	rtc: ds1672@68 {
+	rtc: rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
@@ -444,6 +456,7 @@
 	codec: sgtl5000@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&reg_1p8v>;
 		VDDIO-supply = <&reg_3p3v>;
@@ -473,7 +486,7 @@
 
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: hsd100pxn1 {
+			timing0: timing-hsd100pxn1 {
 				clock-frequency = <65000000>;
 				hactive = <1024>;
 				vactive = <768>;
@@ -508,7 +521,6 @@
 };
 
 &pwm4 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";
@@ -612,7 +624,6 @@
 		fsl,pins = <
 			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
 			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
-			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x4001b0b0 /* CAN_STBY */
 		>;
 	};
 
@@ -702,6 +713,12 @@
 		>;
 	};
 
+	pinctrl_reg_can1: regcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x4001b0b0 /* CAN_STBY */
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
@@ -745,7 +762,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
 			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x170b9
@@ -758,7 +775,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
 			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw53xx.dtsi
index a0710d562766..7e84e0a52ef3 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw53xx.dtsi
@@ -25,7 +25,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
+		pwms = <&pwm4 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 	};
@@ -33,13 +33,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -53,21 +53,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -80,20 +80,20 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
 		};
 
-		led2: user3 {
+		led2: led-user3 {
 			label = "user3";
 			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
 			default-state = "off";
@@ -129,6 +129,16 @@
 		regulator-always-on;
 	};
 
+	reg_can1_stby: regulator-can1-stby {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_can1>;
+		regulator-name = "can1_stby";
+		gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	reg_usb_h1_vbus: regulator-usb-h1-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb_h1_vbus";
@@ -170,6 +180,7 @@
 &can1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can1_stby>;
 	status = "okay";
 };
 
@@ -212,6 +223,7 @@
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		adc {
@@ -338,7 +350,7 @@
 		pagesize = <16>;
 	};
 
-	rtc: ds1672@68 {
+	rtc: rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
@@ -441,6 +453,7 @@
 	codec: sgtl5000@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&reg_1p8v>;
 		VDDIO-supply = <&reg_3p3v>;
@@ -470,7 +483,7 @@
 
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: hsd100pxn1 {
+			timing0: timing-hsd100pxn1 {
 				clock-frequency = <65000000>;
 				hactive = <1024>;
 				vactive = <768>;
@@ -505,7 +518,6 @@
 };
 
 &pwm4 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";
@@ -600,7 +612,6 @@
 		fsl,pins = <
 			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
 			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x4001b0b0 /* CAN_STBY */
 		>;
 	};
 
@@ -691,6 +702,12 @@
 		>;
 	};
 
+	pinctrl_reg_can1: regcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x4001b0b0 /* CAN_STBY */
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
@@ -734,7 +751,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
 			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
@@ -747,7 +764,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
 			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw54xx.dtsi
index cda48bf2f168..81394d47dd68 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw54xx.dtsi
@@ -26,7 +26,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
+		pwms = <&pwm4 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 	};
@@ -34,13 +34,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -54,21 +54,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -81,20 +81,20 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
 		};
 
-		led2: user3 {
+		led2: led-user3 {
 			label = "user3";
 			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
 			default-state = "off";
@@ -114,47 +114,47 @@
 		status = "okay";
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
+	reg_1p0v: regulator-1p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P0V";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-always-on;
+	};
 
-		reg_1p0v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "1P0V";
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1000000>;
-			regulator-always-on;
-		};
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 
-		reg_3p3v: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
+	reg_can1_stby: regulator-can1-stby {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_can1>;
+		regulator-name = "can1_stby";
+		gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 
-		reg_usb_h1_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
 
-		reg_usb_otg_vbus: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 	};
 
 	sound-analog {
@@ -177,7 +177,7 @@
 	pinctrl-0 = <&pinctrl_audmux>; /* AUD4<->sgtl5000 */
 	status = "okay";
 
-	ssi2 {
+	mux-ssi2 {
 		fsl,audmux-port = <1>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_TFSDIR |
@@ -189,7 +189,7 @@
 		>;
 	};
 
-	aud5 {
+	mux-aud5 {
 		fsl,audmux-port = <4>;
 		fsl,port-config = <
 			IMX_AUDMUX_V2_PTCR_SYN
@@ -200,6 +200,7 @@
 &can1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can1_stby>;
 	status = "okay";
 };
 
@@ -338,8 +339,6 @@
 
 		fan-controller@2c {
 			compatible = "gw,gsc-fan";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			reg = <0x2c>;
 		};
 	};
@@ -377,7 +376,7 @@
 		pagesize = <16>;
 	};
 
-	rtc: ds1672@68 {
+	rtc: rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
@@ -389,7 +388,7 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 
@@ -500,6 +499,7 @@
 	sgtl5000: audio-codec@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&sw4_reg>;
 		VDDIO-supply = <&reg_3p3v>;
@@ -529,7 +529,7 @@
 
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: hsd100pxn1 {
+			timing0: timing-hsd100pxn1 {
 				clock-frequency = <65000000>;
 				hactive = <1024>;
 				vactive = <768>;
@@ -570,7 +570,6 @@
 };
 
 &pwm4 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default", "state_dio";
 	pinctrl-0 = <&pinctrl_pwm4_backlight>;
 	pinctrl-1 = <&pinctrl_pwm4_dio>;
@@ -687,7 +686,6 @@
 		fsl,pins = <
 			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
 			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x4001b0b0 /* CAN_STBY */
 		>;
 	};
 
@@ -772,20 +770,26 @@
 		>;
 	};
 
-	pinctrl_pwm4_backlight: pwm4grpbacklight {
+	pinctrl_pwm4_backlight: pwm4backlightgrp {
 		fsl,pins = <
 			/* LVDS_PWM J6.5 */
 			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
 		>;
 	};
 
-	pinctrl_pwm4_dio: pwm4grpdio {
+	pinctrl_pwm4_dio: pwm4diogrp {
 		fsl,pins = <
 			/* DIO3 J16.4 */
 			MX6QDL_PAD_SD4_DAT2__PWM4_OUT		0x1b0b1
 		>;
 	};
 
+	pinctrl_reg_can1: regcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x4001b0b0 /* CAN_STBY */
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
@@ -829,7 +833,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
 			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
@@ -842,7 +846,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
 			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw551x.dtsi
index 435dec6338fe..6136a95b9259 100644
--- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw551x.dtsi
@@ -1,48 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2014 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/gpio/gpio.h>
@@ -68,13 +26,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -88,21 +46,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -115,7 +73,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
 			default-state = "on";
@@ -171,7 +129,7 @@
 	pinctrl-0 = <&pinctrl_audmux>; /* AUD5<->tda1997x */
 	status = "okay";
 
-	ssi1 {
+	mux-ssi1 {
 		fsl,audmux-port = <0>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_TFSDIR |
@@ -183,7 +141,7 @@
 		>;
 	};
 
-	aud5 {
+	mux-aud5 {
 		fsl,audmux-port = <4>;
 		fsl,port-config = <
 			IMX_AUDMUX_V2_PTCR_SYN
@@ -221,6 +179,7 @@
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		adc {
@@ -329,7 +288,7 @@
 		pagesize = <16>;
 	};
 
-	rtc: ds1672@68 {
+	rtc: rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw552x.dtsi
index 2e61102ae694..9c822ca23130 100644
--- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw552x.dtsi
@@ -25,13 +25,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -45,21 +45,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -72,20 +72,20 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
 		};
 
-		led2: user3 {
+		led2: led-user3 {
 			label = "user3";
 			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
 			default-state = "off";
@@ -146,6 +146,7 @@
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		adc {
@@ -260,7 +261,7 @@
 		pagesize = <16>;
 	};
 
-	rtc: ds1672@68 {
+	rtc: rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
diff --git a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw553x.dtsi
index 4662408b225a..552114a69f5b 100644
--- a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw553x.dtsi
@@ -1,48 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2016 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/gpio/gpio.h>
@@ -66,13 +24,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -86,21 +44,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -113,14 +71,14 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
@@ -184,6 +142,7 @@
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		adc {
@@ -298,7 +257,7 @@
 		pagesize = <16>;
 	};
 
-	rtc: ds1672@68 {
+	rtc: rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
@@ -704,7 +663,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
 			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
@@ -717,7 +676,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
 			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
diff --git a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi
index 4bc4371e6bae..e9d5bbb43145 100644
--- a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi
@@ -1,48 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/gpio/gpio.h>
@@ -66,7 +24,7 @@
 
 	backlight-display {
 		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
+		pwms = <&pwm4 0 5000000 0>;
 		brightness-levels = <
 			0  1  2  3  4  5  6  7  8  9
 			10 11 12 13 14 15 16 17 18 19
@@ -92,13 +50,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -112,21 +70,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -139,20 +97,20 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
 		};
 
-		led2: user3 {
+		led2: led-user3 {
 			label = "user3";
 			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
 			default-state = "off";
@@ -296,6 +254,7 @@
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		adc {
@@ -503,7 +462,6 @@
 				regulator-ramp-delay = <7000>;
 				regulator-boot-on;
 				regulator-always-on;
-				linux,phandle = <&reg_vdd_arm>;
 			};
 
 			/* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
@@ -584,7 +542,7 @@
 
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: hsd100pxn1 {
+			timing0: timing-hsd100pxn1 {
 				clock-frequency = <65000000>;
 				hactive = <1024>;
 				vactive = <768>;
@@ -619,7 +577,6 @@
 };
 
 &pwm4 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";
@@ -632,7 +589,6 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
 	rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
@@ -898,7 +854,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
 			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
@@ -911,7 +867,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
 			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
diff --git a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi
index 1fdb7ba630f1..01f77142e153 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi
@@ -1,48 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/gpio/gpio.h>
@@ -56,7 +14,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <
 			0  1  2  3  4  5  6  7  8  9
 			10 11 12 13 14 15 16 17 18 19
@@ -76,13 +34,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -96,21 +54,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -123,7 +81,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
 			default-state = "off";
@@ -237,6 +195,7 @@
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		adc {
@@ -401,7 +360,6 @@
 				regulator-ramp-delay = <7000>;
 				regulator-boot-on;
 				regulator-always-on;
-				linux,phandle = <&reg_vdd_arm>;
 			};
 
 			/* VDD_SOC (1+R1/R2 = 1.635) */
@@ -413,7 +371,6 @@
 				regulator-ramp-delay = <7000>;
 				regulator-boot-on;
 				regulator-always-on;
-				linux,phandle = <&reg_vdd_soc>;
 			};
 
 			/* VDD_1P0 (1+R1/R2 = 1.38): */
@@ -486,7 +443,7 @@
 
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: g101evn010 {
+			timing0: timing-g101evn010 {
 				clock-frequency = <68930000>;
 				hactive = <1280>;
 				vactive = <800>;
@@ -502,7 +459,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
@@ -681,7 +637,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x4001b0b0 /* EMMY_EN */
 			MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x4001b0b0 /* EMMY_CFG1# */
@@ -711,7 +667,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+	pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170b9
 			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100b9
@@ -724,7 +680,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+	pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170f9
 			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100f9
@@ -753,7 +709,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
 			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
@@ -769,7 +725,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
 			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi
index 612b6e068e28..3df4d345da98 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi
@@ -1,48 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/gpio/gpio.h>
@@ -52,6 +10,11 @@
 / {
 	/* these are used by bootloader for disabling nodes */
 	aliases {
+		ethernet0 = &fec;
+		ethernet1 = &lan1;
+		ethernet2 = &lan2;
+		ethernet3 = &lan3;
+		ethernet4 = &lan4;
 		led0 = &led0;
 		led1 = &led1;
 		led2 = &led2;
@@ -65,7 +28,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
+		pwms = <&pwm4 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 	};
@@ -73,13 +36,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -93,21 +56,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -120,20 +83,20 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
 		};
 
-		led2: user3 {
+		led2: led-user3 {
 			label = "user3";
 			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
 			default-state = "off";
@@ -212,34 +175,72 @@
 			compatible = "marvell,mv88e6085";
 			reg = <0>;
 
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				sw_phy0: ethernet-phy@0 {
+					reg = <0x0>;
+				};
+
+				sw_phy1: ethernet-phy@1 {
+					reg = <0x1>;
+				};
+
+				sw_phy2: ethernet-phy@2 {
+					reg = <0x2>;
+				};
+
+				sw_phy3: ethernet-phy@3 {
+					reg = <0x3>;
+				};
+			};
+
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				port@0 {
+				lan4: port@0 {
 					reg = <0>;
 					label = "lan4";
+					phy-handle = <&sw_phy0>;
+					phy-mode = "internal";
+					local-mac-address = [00 00 00 00 00 00];
 				};
 
-				port@1 {
+				lan3: port@1 {
 					reg = <1>;
 					label = "lan3";
+					phy-handle = <&sw_phy1>;
+					phy-mode = "internal";
+					local-mac-address = [00 00 00 00 00 00];
 				};
 
-				port@2 {
+				lan2: port@2 {
 					reg = <2>;
 					label = "lan2";
+					phy-handle = <&sw_phy2>;
+					phy-mode = "internal";
+					local-mac-address = [00 00 00 00 00 00];
 				};
 
-				port@3 {
+				lan1: port@3 {
 					reg = <3>;
 					label = "lan1";
+					phy-handle = <&sw_phy3>;
+					phy-mode = "internal";
+					local-mac-address = [00 00 00 00 00 00];
 				};
 
 				port@5 {
 					reg = <5>;
-					label = "cpu";
 					ethernet = <&fec>;
+					phy-mode = "rgmii-id";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
 				};
 			};
 		};
@@ -259,6 +260,7 @@
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		adc {
@@ -508,7 +510,7 @@
 
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: hsd100pxn1 {
+			timing0: timing-hsd100pxn1 {
 				clock-frequency = <65000000>;
 				hactive = <1024>;
 				vactive = <768>;
@@ -543,7 +545,6 @@
 };
 
 &pwm4 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";
@@ -775,7 +776,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
 			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
@@ -791,7 +792,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
 			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
diff --git a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5907.dtsi
index fcd3bdfd6182..87fdc9e2a727 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5907.dtsi
@@ -24,13 +24,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -44,21 +44,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -71,14 +71,14 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
@@ -156,6 +156,7 @@
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		adc {
@@ -270,7 +271,7 @@
 		pagesize = <16>;
 	};
 
-	ds1672@68 {
+	rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5910.dtsi
index 68e5ab2e27e2..099ed2f94d61 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5910.dtsi
@@ -27,13 +27,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
-			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			gpios = <&gsc_gpio 2 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -47,21 +47,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -74,20 +74,20 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
 		};
 
-		led2: user3 {
+		led2: led-user3 {
 			label = "user3";
 			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
 			default-state = "off";
@@ -165,6 +165,7 @@
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		adc {
@@ -326,7 +327,6 @@
 		st,drdy-int-pin = <1>;
 		interrupt-parent = <&gpio7>;
 		interrupts = <13 0>;
-		interrupt-names = "INT1";
 	};
 };
 
@@ -630,7 +630,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
 			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x170b9
@@ -643,7 +643,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
 			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
diff --git a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5912.dtsi
index 0415bcb41640..cbca5e58e812 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5912.dtsi
@@ -25,13 +25,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -45,21 +45,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -72,20 +72,20 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
 		};
 
-		led2: user3 {
+		led2: led-user3 {
 			label = "user3";
 			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
 			default-state = "off";
@@ -243,8 +243,6 @@
 
 		fan-controller@a {
 			compatible = "gw,gsc-fan";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			reg = <0x0a>;
 		};
 	};
@@ -309,7 +307,6 @@
 		st,drdy-int-pin = <1>;
 		interrupt-parent = <&gpio7>;
 		interrupts = <13 0>;
-		interrupt-names = "INT1";
 	};
 };
 
@@ -572,7 +569,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
 			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
@@ -585,7 +582,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
 			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
diff --git a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5913.dtsi
index 8e23cec7149e..4e4dce5adc15 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5913.dtsi
@@ -24,13 +24,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
-			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			gpios = <&gsc_gpio 2 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -44,21 +44,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -71,14 +71,14 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
@@ -141,6 +141,7 @@
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		adc {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi
new file mode 100644
index 000000000000..6b737360a532
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi
@@ -0,0 +1,375 @@
+/*
+ * Copyright (C) 2013,2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	aliases {
+		rtc0 = &carrier_rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	ir_recv: ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard_gpio3_5>;
+	};
+
+	v_3v2: regulator-v-3v2 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "v_3v2";
+		vin-supply = <&v_5v0>;
+	};
+
+	v_5v0: regulator-v-5v0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_5v0";
+	};
+
+	v_sd: regulator-v-sd {
+		compatible = "regulator-fixed";
+		gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard_vmmc>;
+		regulator-boot-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "v_sd";
+		startup-delay-us = <1000>;
+		vin-supply = <&v_3v2>;
+	};
+
+	v_usb2: regulator-v-usb2 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard_usbh1_vbus>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb2";
+		vin-supply = <&v_5v0>;
+	};
+
+	v_usb1: regulator-v-usb1 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard_usbotg_vbus>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb1";
+		vin-supply = <&v_5v0>;
+	};
+
+	audio: sound-sgtl5000 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board Codec";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_codec>;
+		simple-audio-card,frame-master = <&sound_codec>;
+		simple-audio-card,widgets =
+			"Microphone", "Headphone Jack",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Headphone Jack",
+			"Headphone Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+
+		sound_cpu: simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+		};
+
+		sound_codec: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "On-board SPDIF";
+		/* IMX6 doesn't implement this yet */
+		audio-cpu = <&spdif>;
+		audio-codec = <&spdif_out>;
+	};
+};
+
+&audmux {
+	status = "okay";
+
+	mux-ssi1 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_SYN |
+			 IMX_AUDMUX_V2_PTCR_TFSEL(4) |
+			 IMX_AUDMUX_V2_PTCR_TCSEL(4) |
+			 IMX_AUDMUX_V2_PTCR_TFSDIR |
+			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
+			 IMX_AUDMUX_V2_PDCR_RXDSEL(4)
+		>;
+	};
+
+	mux-pins5 {
+		fsl,audmux-port = <4>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+		>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard_flexcan1>;
+	status = "okay";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard_hdmi>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard_i2c1>;
+	status = "okay";
+
+	/* Pro baseboard model */
+	carrier_rtc: rtc@68 {
+		compatible = "nxp,pcf8523";
+		reg = <0x68>;
+	};
+
+	/* Pro baseboard model */
+	sgtl5000: codec@a {
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		compatible = "fsl,sgtl5000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard_sgtl5000>;
+		#sound-dai-cells = <0>;
+		reg = <0x0a>;
+		VDDA-supply = <&v_3v2>;
+		VDDIO-supply = <&v_3v2>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard_i2c2>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_hummingboard_flexcan1: hummingboard-flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x80000000
+			MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x80000000
+		>;
+	};
+
+	pinctrl_hummingboard_gpio3_5: hummingboard-gpio3_5grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x1b0b1
+		>;
+	};
+
+	pinctrl_hummingboard_hdmi: hummingboard-hdmigrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+		>;
+	};
+
+	pinctrl_hummingboard_i2c1: hummingboard-i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_hummingboard_i2c2: hummingboard-i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_hummingboard_pcie_reset: hummingboard-pcie-resetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x1b0b1
+		>;
+	};
+
+	pinctrl_hummingboard_pwm1: pwm1grp {
+		fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1>;
+	};
+
+	pinctrl_hummingboard_sgtl5000: hummingboard-sgtl5000grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0
+			MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0
+			MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0
+			MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0
+			MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
+		>;
+	};
+
+	pinctrl_hummingboard_spdif: hummingboard-spdifgrp {
+		fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
+	};
+
+	pinctrl_hummingboard_usbh1_vbus: hummingboard-usbh1-vbusgrp {
+		fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>;
+	};
+
+	pinctrl_hummingboard_usbotg_id: hummingboard-usbotg-idgrp {
+		/*
+		 * We want it pulled down for a fixed host connection.
+		 */
+		fsl,pins = <MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x13059>;
+	};
+
+	pinctrl_hummingboard_usbotg_vbus: hummingboard-usbotg-vbusgrp {
+		fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>;
+	};
+
+	pinctrl_hummingboard_usdhc2_aux: hummingboard-usdhc2-auxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04    0x1f071
+		>;
+	};
+
+	pinctrl_hummingboard_usdhc2: hummingboard-usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
+		>;
+	};
+	pinctrl_hummingboard_vmmc: hummingboard-vmmcgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0
+		>;
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard_pcie_reset>;
+	reset-gpio = <&gpio3 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm1 {
+	 pinctrl-names = "default";
+	 pinctrl-0 = <&pinctrl_hummingboard_pwm1>;
+	 status = "okay";
+};
+
+&pwm2 {
+	 status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard_spdif>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	vbus-supply = <&v_usb2>;
+	status = "okay";
+};
+
+&usbotg {
+	disable-over-current;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>;
+	vbus-supply = <&v_usb1>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&pinctrl_hummingboard_usdhc2_aux
+		&pinctrl_hummingboard_usdhc2
+	>;
+	vmmc-supply = <&v_sd>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&vcc_3v3 {
+	vin-supply = <&v_3v2>;
+};
diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard2-emmc.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard2-emmc.dtsi
index f400405381a7..c3efb001c515 100644
--- a/arch/arm/boot/dts/imx6qdl-hummingboard2-emmc.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard2-emmc.dtsi
@@ -42,22 +42,20 @@
  */
 
 &iomuxc {
-	hummingboard2 {
-		pinctrl_hummingboard2_usdhc3: hummingboard2-usdhc3 {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
-				MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
-				MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
-				MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
-				MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
-				MX6QDL_PAD_SD3_RST__SD3_RESET  0x17059
-			>;
-		};
+	pinctrl_hummingboard2_usdhc3: hummingboard2-usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+			MX6QDL_PAD_SD3_RST__SD3_RESET  0x17059
+		>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard2.dtsi
new file mode 100644
index 000000000000..3069e1738ba2
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard2.dtsi
@@ -0,0 +1,580 @@
+/*
+ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	aliases {
+		rtc0 = &pcf8523;
+		rtc1 = &snvs_rtc;
+	};
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	ir_recv: ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio7 9 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard2_gpio7_9>;
+		linux,rc-map-name = "rc-rc6-mce";
+	};
+
+	v_3v2: regulator-v-3v2 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "v_3v2";
+	};
+
+	v_5v0: regulator-v-5v0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_5v0";
+	};
+
+	vcc_1p8: regulator-vcc-1p8 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "vcc_1p8";
+		vin-supply = <&v_3v2>;
+	};
+
+	v_sd: regulator-v-sd {
+		compatible = "regulator-fixed";
+		gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard2_vmmc>;
+		regulator-boot-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "v_sd";
+		startup-delay-us = <1000>;
+		vin-supply = <&v_3v2>;
+	};
+
+	v_usb1: regulator-v-usb1 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard2_usbotg_vbus>;
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb1";
+		vin-supply = <&v_5v0>;
+	};
+
+	v_usb2: regulator-v-usb2 {
+		/* USB hub port 1 */
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard2_usbh1_vbus>;
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb2";
+		vin-supply = <&v_5v0>;
+	};
+
+	v_usb3: regulator-v-usb3 {
+		/* USB hub port 3 */
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard2_usbh2_vbus>;
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb3";
+		vin-supply = <&v_5v0>;
+	};
+
+	v_usb4: regulator-v-usb4 {
+		/* USB hub port 4 */
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard2_usbh3_vbus>;
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb4";
+		vin-supply = <&v_5v0>;
+	};
+
+	audio: sound-sgtl5000 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board Codec";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_codec>;
+		simple-audio-card,frame-master = <&sound_codec>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+
+		sound_cpu: simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+		};
+
+		sound_codec: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+};
+
+&audmux {
+	status = "okay";
+
+	mux-ssi1 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_SYN |
+			 IMX_AUDMUX_V2_PTCR_TFSEL(4) |
+			 IMX_AUDMUX_V2_PTCR_TCSEL(4) |
+			 IMX_AUDMUX_V2_PTCR_TFSDIR |
+			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
+			 IMX_AUDMUX_V2_PDCR_RXDSEL(4)
+		>;
+	};
+
+	mux-pins5 {
+		fsl,audmux-port = <4>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+		>;
+	};
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_ecspi2>;
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_hdmi>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_i2c1>;
+	status = "okay";
+
+	pcf8523: rtc@68 {
+		compatible = "nxp,pcf8523";
+		reg = <0x68>;
+	};
+
+	sgtl5000: codec@a {
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		compatible = "fsl,sgtl5000";
+		#sound-dai-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard2_sgtl5000>;
+		reg = <0x0a>;
+		VDDA-supply = <&v_3v2>;
+		VDDD-supply = <&vcc_1p8>;
+		VDDIO-supply = <&v_3v2>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_i2c3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/*
+			 * 36 pin headers GPIO description. The pins
+			 * numbering as following -
+			 *
+			 * 	3.2v	5v	74	75
+			 *	73	72	71	70
+			 *	69	68	67	66
+			 *
+			 *	77	78	79	76
+			 *	65	64	61	60
+			 *	53	52	51	50
+			 *	49	48	166	132
+			 *	95	94	90	91
+			 *	GND	54	24	204
+			 *
+			 * The GPIO numbers can be extracted using
+			 * signal name from below.
+			 * Example -
+			 * MX6QDL_PAD_EIM_DA10__GPIO3_IO10 is
+			 * GPIO(3,10) which is (3-1)*32+10 = gpio 74
+			 *
+			 * i.e. The mapping of GPIO(X,Y) to Linux gpio
+			 * number is : gpio number = (X-1) * 32 + Y
+			 */
+			/* DI1_PIN15 */
+			MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x400130b1
+			/* DI1_PIN02 */
+			MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x400130b1
+			/* DISP1_DATA00 */
+			MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x400130b1
+			/* DISP1_DATA01 */
+			MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x400130b1
+			/* DISP1_DATA02 */
+			MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x400130b1
+			/* DISP1_DATA03 */
+			MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x400130b1
+			/* DISP1_DATA04 */
+			MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x400130b1
+			/* DISP1_DATA05 */
+			MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x400130b1
+			/* DISP1_DATA06 */
+			MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x400130b1
+			/* DISP1_DATA07 */
+			MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x400130b1
+			/* DI1_D0_CS */
+			MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x400130b1
+			/* DI1_D1_CS */
+			MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x400130b1
+			/* DI1_PIN01 */
+			MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x400130b1
+			/* DI1_PIN03 */
+			MX6QDL_PAD_EIM_DA12__GPIO3_IO12 0x400130b1
+			/* DISP1_DATA08 */
+			MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x400130b1
+			/* DISP1_DATA09 */
+			MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x400130b1
+			/* DISP1_DATA10 */
+			MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x400130b1
+			/* DISP1_DATA11 */
+			MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x400130b1
+			/* DISP1_DATA12 */
+			MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x400130b1
+			/* DISP1_DATA13 */
+			MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x400130b1
+			/* DISP1_DATA14 */
+			MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x400130b1
+			/* DISP1_DATA15 */
+			MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x400130b1
+			/* DISP1_DATA16 */
+			MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x400130b1
+			/* DISP1_DATA17 */
+			MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x400130b1
+			/* DISP1_DATA18 */
+			MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x400130b1
+			/* DISP1_DATA19 */
+			MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x400130b1
+			/* DISP1_DATA20 */
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x400130b1
+			/* DISP1_DATA21 */
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x400130b1
+			/* DISP1_DATA22 */
+			MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x400130b1
+			/* DISP1_DATA23 */
+			MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x400130b1
+			/* DI1_DISP_CLK */
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x400130b1
+			/* SPDIF_IN */
+			MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x400130b1
+			/* SPDIF_OUT */
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x400130b1
+
+			/* MikroBUS GPIO pin number 10 */
+			MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x400130b1
+		>;
+	};
+
+	pinctrl_hummingboard2_ecspi2: hummingboard2-ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO	0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI	0x100b1
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK	0x100b1
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26	0x000b1 /* CS */
+		>;
+	};
+
+	pinctrl_hummingboard2_gpio7_9: hummingboard2-gpio7_9grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__GPIO7_IO09 0x80000000
+		>;
+	};
+
+	pinctrl_hummingboard2_hdmi: hummingboard2-hdmigrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+		>;
+	};
+
+	pinctrl_hummingboard2_i2c1: hummingboard2-i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_hummingboard2_i2c2: hummingboard2-i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_hummingboard2_i2c3: hummingboard2-i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_hummingboard2_mipi: hummingboard2_mipigrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x4001b8b1
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x4001b8b1
+			MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0
+		>;
+	};
+
+	pinctrl_hummingboard2_pcie_reset: hummingboard2-pcie-resetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b1
+		>;
+	};
+
+	pinctrl_hummingboard2_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_hummingboard2_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_hummingboard2_sgtl5000: hummingboard2-sgtl5000grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0
+			MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0
+			MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0
+			MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0
+			MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
+		>;
+	};
+
+	pinctrl_hummingboard2_usbh1_vbus: hummingboard2-usbh1-vbusgrp {
+		fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>;
+	};
+
+	pinctrl_hummingboard2_usbh2_vbus: hummingboard2-usbh2-vbusgrp {
+		fsl,pins = <MX6QDL_PAD_SD4_DAT5__GPIO2_IO13 0x1b0b0>;
+	};
+
+	pinctrl_hummingboard2_usbh3_vbus: hummingboard2-usbh3-vbusgrp {
+		fsl,pins = <MX6QDL_PAD_SD4_CLK__GPIO7_IO10 0x1b0b0>;
+	};
+
+	pinctrl_hummingboard2_usbotg_id: hummingboard2-usbotg-idgrp {
+		/*
+		 * We want it pulled down for a fixed host connection.
+		 */
+		fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>;
+	};
+
+	pinctrl_hummingboard2_usbotg_vbus: hummingboard2-usbotg-vbusgrp {
+		fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>;
+	};
+
+	pinctrl_hummingboard2_usdhc2_aux: hummingboard2-usdhc2-auxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04    0x1f071
+			MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b071
+		>;
+	};
+
+	pinctrl_hummingboard2_usdhc2: hummingboard2-usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
+		>;
+	};
+
+	pinctrl_hummingboard2_usdhc2_100mhz: hummingboard2-usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD    0x170b9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK    0x100b9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x130b9
+		>;
+	};
+
+	pinctrl_hummingboard2_usdhc2_200mhz: hummingboard2-usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD    0x170f9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK    0x100f9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x130f9
+		>;
+	};
+
+	pinctrl_hummingboard2_vmmc: hummingboard2-vmmcgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0
+		>;
+	};
+
+	pinctrl_hummingboard2_uart3: hummingboard2-uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D25__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D24__UART3_RX_DATA	0x40013000
+		>;
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_pcie_reset>;
+	reset-gpio = <&gpio2 11 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_pwm1>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_pwm3>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	disable-over-current;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_usbotg_id>;
+	vbus-supply = <&v_usb1>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <
+		&pinctrl_hummingboard2_usdhc2_aux
+		&pinctrl_hummingboard2_usdhc2
+	>;
+	pinctrl-1 = <
+		&pinctrl_hummingboard2_usdhc2_aux
+		&pinctrl_hummingboard2_usdhc2_100mhz
+	>;
+	pinctrl-2 = <
+		&pinctrl_hummingboard2_usdhc2_aux
+		&pinctrl_hummingboard2_usdhc2_200mhz
+	>;
+	vmmc-supply = <&v_sd>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_uart3>;
+	status = "okay";
+};
+
+&vcc_3v3 {
+	vin-supply = <&v_3v2>;
+};
diff --git a/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-icore-1.5.dtsi
index 0fd7f2e24d9c..0fd7f2e24d9c 100644
--- a/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-icore-1.5.dtsi
diff --git a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-icore-rqs.dtsi
index a4217f564a53..dff184a119f3 100644
--- a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-icore-rqs.dtsi
@@ -118,7 +118,7 @@
 	pinctrl-0 = <&pinctrl_audmux>;
 	status = "okay";
 
-	audmux_ssi1 {
+	mux-ssi1 {
 		fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_TFSDIR |
@@ -130,7 +130,7 @@
 		>;
 	};
 
-	audmux_aud4 {
+	mux-aud4 {
 		fsl,audmux-port = <MX51_AUDMUX_PORT4>;
 		fsl,port-config = <
 			IMX_AUDMUX_V2_PTCR_SYN
@@ -262,7 +262,7 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	vmcc-supply = <&reg_sd3_vmmc>;
+	vmmc-supply = <&reg_sd3_vmmc>;
 	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
 	bus-width = <4>;
 	no-1-8-v;
@@ -274,7 +274,7 @@
 	pinctrl-0 = <&pinctrl_usdhc4>;
 	pinctrl-1 = <&pinctrl_usdhc4_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc4_200mhz>;
-	vmcc-supply = <&reg_sd4_vmmc>;
+	vmmc-supply = <&reg_sd4_vmmc>;
 	bus-width = <8>;
 	no-1-8-v;
 	non-removable;
@@ -397,7 +397,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x170B1
 			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x100B1
@@ -408,7 +408,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x170F9
 			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x100F9
@@ -434,7 +434,7 @@
 		>;
 	};
 
-	pinctrl_usdhc4_100mhz: usdhc4grp_100mhz {
+	pinctrl_usdhc4_100mhz: usdhc4-100mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD4_CMD__SD4_CMD    0x170B1
 			MX6QDL_PAD_SD4_CLK__SD4_CLK    0x100B1
@@ -449,7 +449,7 @@
 		>;
 	};
 
-	pinctrl_usdhc4_200mhz: usdhc4grp_200mhz {
+	pinctrl_usdhc4_200mhz: usdhc4-200mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD4_CMD__SD4_CMD    0x170F9
 			MX6QDL_PAD_SD4_CLK__SD4_CLK    0x100F9
diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-icore.dtsi
index 23c318d9636f..9975b6ee433d 100644
--- a/arch/arm/boot/dts/imx6qdl-icore.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-icore.dtsi
@@ -20,7 +20,7 @@
 
 	backlight_lvds: backlight-lvds {
 		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 100000>;
+		pwms = <&pwm3 0 100000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 	};
@@ -109,7 +109,7 @@
 	status = "okay";
 
 
-	audmux_ssi1 {
+	mux-ssi1 {
 		fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_TFSDIR |
@@ -121,7 +121,7 @@
 		>;
 	};
 
-	audmux_aud4 {
+	mux-aud4 {
 		fsl,audmux-port = <MX51_AUDMUX_PORT4>;
 		fsl,port-config = <
 			IMX_AUDMUX_V2_PTCR_SYN
@@ -245,7 +245,6 @@
 };
 
 &pwm3 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i-ads2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i-ads2.dtsi
new file mode 100644
index 000000000000..b4a79245b7b6
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i-ads2.dtsi
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree include for the Kontron SMARC-sAMX6i board on a SMARC Eval
+ * 2.0 carrier (ADS2).
+ *
+ */
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	sound {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Line", "Line Out Jack",
+			"Microphone", "Microphone Jack",
+			"Line", "Line In Jack";
+		simple-audio-card,routing =
+			"Line Out Jack", "LINEOUTR",
+			"Line Out Jack", "LINEOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"IN1L", "Line In Jack",
+			"IN1R", "Line In Jack",
+			"Microphone Jack", "MICBIAS",
+			"IN2L", "Microphone Jack",
+			"IN2R", "Microphone Jack";
+
+		simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&wm8904>;
+		};
+	};
+
+	reg_codec_mic: regulator-codec-mic {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_MIC";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_codec_1p8v: regulator-codec-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V8_S0_CODEC";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&audmux {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "okay";
+};
+
+&ecspi4 {
+	flash@1 {
+		compatible = "jedec,spi-nor";
+		reg = <1>;
+		spi-max-frequency = <100000000>;
+		m25p,fast-read;
+	};
+};
+
+&fec {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	wm8904: audio-codec@1a {
+		compatible = "wlf,wm8904";
+		reg = <0x1a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks IMX6QDL_CLK_CKO2>;
+		clock-names = "mclk";
+		AVDD-supply = <&reg_codec_1p8v>;
+		CPVDD-supply = <&reg_codec_1p8v>;
+		DBVDD-supply = <&reg_codec_1p8v>;
+		DCVDD-supply = <&reg_codec_1p8v>;
+		MICVDD-supply = <&reg_codec_mic>;
+	};
+};
+
+&i2c3 {
+	eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <32>;
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
+
+&usdhc3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i.dtsi
index b167b33bd108..c771f87b10df 100644
--- a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i.dtsi
@@ -51,24 +51,26 @@
 		vin-supply = <&reg_3p3v_s5>;
 	};
 
-	reg_3p3v_s0: regulator-3p3v-s0 {
+	reg_3p3v_s5: regulator-3p3v-s5 {
 		compatible = "regulator-fixed";
-		regulator-name = "V_3V3_S0";
+		regulator-name = "V_3V3_S5";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		regulator-always-on;
 		regulator-boot-on;
-		vin-supply = <&reg_3p3v_s5>;
+		vin-supply = <&reg_smarc_suppy>;
 	};
 
-	reg_3p3v_s5: regulator-3p3v-s5 {
+	reg_sdio: regulator-sdio {
 		compatible = "regulator-fixed";
-		regulator-name = "V_3V3_S5";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_sdio>;
+		regulator-name = "V_3V3_SD";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&reg_smarc_suppy>;
+		gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		off-on-delay-us = <20000>;
 	};
 
 	reg_smarc_lcdbklt: regulator-smarc-lcdbklt {
@@ -147,7 +149,7 @@
 		status = "disabled";
 	};
 
-	i2c_intern: i2c-gpio-intern {
+	i2c_intern: i2c-0 {
 		compatible = "i2c-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c_gpio_intern>;
@@ -158,7 +160,7 @@
 		#size-cells = <0>;
 	};
 
-	i2c_lcd: i2c-gpio-lcd {
+	i2c_lcd: i2c-1 {
 		compatible = "i2c-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c_gpio_lcd>;
@@ -170,7 +172,7 @@
 		status = "disabled";
 	};
 
-	i2c_cam: i2c-gpio-cam {
+	i2c_cam: i2c-2 {
 		compatible = "i2c-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c_gpio_cam>;
@@ -188,7 +190,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_audmux>;
 
-	audmux_ssi1 {
+	mux-ssi1 {
 		fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT3) |
@@ -200,7 +202,7 @@
 		>;
 	};
 
-	audmux_adu3 {
+	mux-aud3 {
 		fsl,audmux-port = <MX51_AUDMUX_PORT3>;
 		fsl,port-config = <
 			IMX_AUDMUX_V2_PTCR_SYN
@@ -208,7 +210,7 @@
 		>;
 	};
 
-	audmux_ssi2 {
+	mux-ssi2 {
 		fsl,audmux-port = <MX51_AUDMUX_PORT2_SSI1>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT4) |
@@ -220,7 +222,7 @@
 		>;
 	};
 
-	audmux_adu4 {
+	mux-aud4 {
 		fsl,audmux-port = <MX51_AUDMUX_PORT4>;
 		fsl,port-config = <
 			IMX_AUDMUX_V2_PTCR_SYN
@@ -254,12 +256,13 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi4>;
 	cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>,
-		   <&gpio3 29 GPIO_ACTIVE_LOW>;
+		   <&gpio3 29 GPIO_ACTIVE_LOW>,
+		   <&gpio3 25 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
 	/* default boot source: workaround #1 for errata ERR006282 */
-	smarc_flash: spi-flash@0 {
-		compatible = "winbond,w25q16dw", "jedec,spi-nor";
+	smarc_flash: flash@0 {
+		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <20000000>;
 	};
@@ -269,8 +272,24 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+	phy-connection-type = "rgmii-id";
+	phy-handle = <&ethphy>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <1000>;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
 };
 
 &i2c_intern {
@@ -350,10 +369,6 @@
 				regulator-always-on;
 			};
 
-			/*
-			 * Per schematics, of all VGEN's, only VGEN5 has some
-			 * usage ... but even that - over DNI resistor
-			 */
 			vgen1 {
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <1550000>;
@@ -374,8 +389,7 @@
 				regulator-max-microvolt = <3300000>;
 			};
 
-			reg_2p5v_s0: vgen5 {
-				regulator-name = "V_2V5_S0";
+			vgen5 {
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
 			};
@@ -397,7 +411,7 @@
 
 /* HDMI_CTRL */
 &i2c2 {
-	clock-frequency = <375000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
 };
@@ -458,6 +472,8 @@
 			MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x1b0b0
 			/* SPI_IMX_CS0# - connected to SMARC SPI0_CS0# */
 			MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0
+			/* SPI4_CS3# - connected to SMARC SPI0_CS1# */
+			MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x1b0b0
 		>;
 	};
 
@@ -510,7 +526,7 @@
 			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
 			MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
 			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
-			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25    0x1b0b0 /* RST_GBE0_PHY# */
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01       0x1b0b0 /* RST_GBE0_PHY# */
 		>;
 	};
 
@@ -636,6 +652,12 @@
 		>;
 	};
 
+	pinctrl_reg_sdio: reg-sdiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* SDIO_PWR_EN */
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
@@ -688,7 +710,6 @@
 
 			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 /* CD */
 			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b0 /* WP */
-			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PWR_EN */
 		>;
 	};
 
@@ -707,7 +728,7 @@
 		>;
 	};
 
-	pinctrl_wdog1: wdog1rp {
+	pinctrl_wdog1: wdog1grp {
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_9__WDOG1_B	0x1b0b0
 		>;
@@ -722,8 +743,7 @@
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
-	wake-up-gpio = <&gpio6 18 GPIO_ACTIVE_HIGH>;
-	reset-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+	reset-gpio = <&gpio3 13 GPIO_ACTIVE_LOW>;
 };
 
 /* LCD_BKLT_PWM */
@@ -791,12 +811,12 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_sdio>;
 	no-1-8-v;
 };
 
 /* SDMMC */
 &usdhc4 {
-	/* Internal eMMC, optional on some boards */
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc4>;
 	bus-width = <8>;
@@ -805,11 +825,13 @@
 	non-removable;
 	vmmc-supply = <&reg_3p3v_s0>;
 	vqmmc-supply = <&reg_1p8v_s0>;
+	status = "okay";
 };
 
 &wdog1 {
 	/* CPLD is feeded by watchdog (hardwired) */
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_wdog1>;
+	fsl,ext-reset-output;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi
new file mode 100644
index 000000000000..ee2c6bec92e8
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi
@@ -0,0 +1,606 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include <dt-bindings/clock/imx6qdl-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	aliases {
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc2;
+		/delete-property/ mmc2;
+		/delete-property/ mmc3;
+		rtc0 = &rtc0;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	beeper: gpio-beeper {
+		compatible = "gpio-beeper";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiobeeper>;
+		gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio_buttons: gpio-buttons {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiobuttons>;
+
+		button-1 {
+			label = "s6";
+			linux,code = <KEY_F6>;
+			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button-2 {
+			label = "s7";
+			linux,code = <KEY_F7>;
+			gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button-3 {
+			label = "s8";
+			linux,code = <KEY_F8>;
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpioled>;
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led2 {
+			label = "led2";
+			gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_mba6_3p3v: regulator-mba6-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "supply-mba6-3p3v";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_pcie: regulator-pcie {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_regpcie>;
+		regulator-name = "supply-pcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		/* PCIE.PWR_EN */
+		gpio = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&reg_mba6_3p3v>;
+	};
+
+	reg_vcc3v3_audio: regulator-vcc3v3-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3-audio";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_mba6_3p3v>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x14000000>;
+			alloc-ranges = <0x10000000 0x20000000>;
+			linux,cma-default;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-tlv320aic32x4";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_audmux>;
+		model = "tqm-tlv320aic32";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&tlv320aic32x4>;
+		audio-asrc = <&asrc>;
+		audio-routing =
+			"IN3_L", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"IN1_L", "Line In Jack",
+			"IN1_R", "Line In Jack",
+			"Line Out Jack", "LOL",
+			"Line Out Jack", "LOR";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+};
+
+&audmux {
+	status = "okay";
+
+	mux-ssi0 {
+		fsl,audmux-port = <MX31_AUDMUX_PORT1_SSI0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_SYN |
+				IMX_AUDMUX_V2_PTCR_TFSDIR |
+				IMX_AUDMUX_V2_PTCR_TFSEL(MX31_AUDMUX_PORT3_SSI_PINS_3) |
+				IMX_AUDMUX_V2_PTCR_TCLKDIR |
+				IMX_AUDMUX_V2_PTCR_TCSEL(MX31_AUDMUX_PORT3_SSI_PINS_3))
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX31_AUDMUX_PORT3_SSI_PINS_3)
+		>;
+	};
+
+	mux-aud3 {
+		fsl,audmux-port = <MX31_AUDMUX_PORT3_SSI_PINS_3>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX31_AUDMUX_PORT1_SSI0)
+		>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>, <&pinctrl_ecspi1_mba6>;
+	cs-gpios = <&gpio3 19 0>, <&gpio3 24 0>;
+};
+
+&fec {
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy>;
+	mac-address = [00 00 00 00 00 00];
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@3 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <3>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <1000>;
+			reset-deassert-us = <100000>;
+			micrel,force-master;
+			max-speed = <1000>;
+		};
+	};
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	tlv320aic32x4: audio-codec@18 {
+		compatible = "ti,tlv320aic32x4";
+		reg = <0x18>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		clock-names = "mclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_codec>;
+		ldoin-supply = <&reg_vcc3v3_audio>;
+		iov-supply = <&reg_mba6_3p3v>;
+	};
+};
+
+/* DDC */
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_recovery>;
+	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio6 7 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	uart-has-rtscts;
+	linux,rs485-enabled-at-boot-time;
+	rs485-rts-active-low;
+	rs485-rx-during-tx;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hub@1 {
+		compatible = "usb424,2517";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		vdd-supply = <&reg_mba6_3p3v>;
+
+		ethernet@1 {
+			compatible = "usb424,9e00";
+			reg = <1>;
+			nvmem-cells = <&mba_mac_address>;
+			nvmem-cell-names = "mac-address";
+		};
+	};
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	power-active-high;
+	over-current-active-low;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+/* SD card slot */
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	vmmc-supply = <&reg_mba6_3p3v>;
+	bus-width = <4>;
+	no-1-8-v;
+	no-mmc;
+	no-sdio;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog1>;
+	/* does not work on unmodified starter kit */
+	/* fsl,ext-reset-output; */
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0
+		>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0xb099
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0xb099
+		>;
+	};
+
+	pinctrl_can2: can2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0xb099
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0xb099
+		>;
+	};
+
+	pinctrl_codec: codecgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0xb0 /* CLK */
+		>;
+	};
+
+	pinctrl_ecspi1_mba6: ecspimba6grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__GPIO3_IO24 0xb099 /* eCSPI1 SS2 */
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			/* FEC phy IRQ */
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28     0x00011008
+			/* FEC phy reset */
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25   0x1b099
+			/* DSE = 100, 100k up, SPEED = MED */
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0xb0a0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC         0xb0a0
+			/* DSE = 111, pull 100k up */
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0xb038
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0xb038
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0xb038
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0xb038
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0xb038
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0xb038
+			/* DSE = 111, pull external */
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x0038
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x0038
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x0038
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x0038
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x0038
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x0038
+			/* HYS = 1, DSE = 111, 100k up, SPEED = HIGH */
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0f0
+		>;
+	};
+
+	pinctrl_gpiobeeper: gpiobeepergrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0xb099
+		>;
+	};
+
+	pinctrl_gpiobuttons: gpiobuttongrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x0001b099
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x0001b099
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b099
+		>;
+	};
+
+	pinctrl_gpioled: gpioledgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0xb099 /* LED V15 */
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0xb099 /* LED V16 */
+		>;
+	};
+
+	pinctrl_hdmi: hdmigrp {
+		/* NOTE: DDC is done via I2C2, so DON'T
+		 * configure DDC pins for HDMI!
+		 */
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x1f8b0
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x0001b099
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x0001b099
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x0001b099
+
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x0001b099
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x0001b099
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x0001b099
+			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x0001b099
+			MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x0001b099
+			MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x0001b099
+			MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x0001b099
+
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x0001b099
+			MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x0001b099
+			MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x0001b099
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x0001b099
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x0001b099
+
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x0001b099
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x0001b099
+			MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x0001b099
+			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x0001b099
+
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x0001b099
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x0001b099
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x0001b099
+
+			MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x0001b099
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x0001b099
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b899
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b899
+		>;
+	};
+
+	pinctrl_i2c2_recovery: i2c2recoverygrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x4001b899
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x4001b899
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			/* HYS = 1, DSE = 110, 100k up, SPEED = HIGH (11)*/
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x001b0f0 /* #PCIE.WAKE */
+			MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x001b0f0 /* #PCIE.RST */
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x001b0f0 /* #PCIE.DIS */
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			/* 100 k PD, DSE 120 OHM, SPEED LO */
+			MX6QDL_PAD_GPIO_9__PWM1_OUT 0x00003050
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			/* 100 k PD, DSE 120 OHM, SPEED LO */
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x00003050
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			/* 100 k PD, DSE 120 OHM, SPEED LO */
+			MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x00003050
+		>;
+	};
+
+	pinctrl_regpcie: regpciegrp {
+		fsl,pins = <
+			/* HYS = 1, DSE = 110, PUE+PKE, SPEED = HIGH (11)*/
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x00130f0 /* PCIE.PWR_EN */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b099
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b099
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CLK__UART3_RX_DATA 0x1b0b1
+			MX6QDL_PAD_SD4_CMD__UART3_TX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D30__UART3_CTS_B   0x1b0b1
+			MX6QDL_PAD_EIM_D31__UART3_RTS_B   0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B 0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			/* CLK: 47k Pup SPD_LOW DSE 40Ohm SRE_FAST HYS */
+			MX6QDL_PAD_SD2_CLK__SD2_CLK    0x00017071
+			/* SD2: 47k Pup SPD_LOW DSE 80Ohm SRE_FAST HYS */
+			MX6QDL_PAD_SD2_CMD__SD2_CMD    0x00017059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x00017059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x00017059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x00017059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x00017059
+
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04  0x0001b099 /* usdhc2 CD */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02  0x0001b099 /* usdhc2 WP */
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__USB_OTG_OC  0x0001b0b0
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID   0x00017059
+			MX6QDL_PAD_EIM_D22__USB_OTG_PWR 0x0001b099
+		>;
+	};
+
+	pinctrl_wdog1: wdog1grp {
+		fsl,pins = <
+			 /* Watchdog out */
+			MX6QDL_PAD_SD1_DAT2__WDOG1_B 0x0000b099
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6a.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6a.dtsi
new file mode 100644
index 000000000000..aca320ee8f47
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6a.dtsi
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>, <&pinctrl_enet_fix>;
+};
+
+&i2c1 {
+	lm75: temperature-sensor@49 {
+		compatible = "national,lm75a";
+		reg = <0x49>;
+		vs-supply = <&reg_mba6_3p3v>;
+	};
+
+	m24c64_57: eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <32>;
+		vcc-supply = <&reg_mba6_3p3v>;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			mba_mac_address: mac-address@20 {
+				reg = <0x20 0x6>;
+			};
+		};
+	};
+
+	rtc0: rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6b.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6b.dtsi
new file mode 100644
index 000000000000..c7bbd6195fef
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6b.dtsi
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_recovery>;
+	scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c3 {
+	lm75: temperature-sensor@49 {
+		compatible = "national,lm75a";
+		reg = <0x49>;
+		vs-supply = <&reg_mba6_3p3v>;
+	};
+
+	m24c64_57: eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <32>;
+		vcc-supply = <&reg_mba6_3p3v>;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			mba_mac_address: mac-address@20 {
+				reg = <0x20 0x6>;
+			};
+		};
+	};
+
+	rtc0: rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi
new file mode 100644
index 000000000000..610b2a72fe82
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi
@@ -0,0 +1,571 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2015 Boundary Devices, Inc.
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_wlan_vmmc: regulator-wlan-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wlan_vmmc>;
+		regulator-name = "reg_wlan_vmmc";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-home {
+			label = "Home";
+			gpios = <&gpio7 13 IRQ_TYPE_LEVEL_LOW>;
+			linux,code = <102>;
+		};
+
+		key-back {
+			label = "Back";
+			gpios = <&gpio4 5 IRQ_TYPE_LEVEL_LOW>;
+			linux,code = <158>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-j14-pin1 {
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+			retain-state-suspended;
+			default-state = "off";
+		};
+
+		led-j14-pin3 {
+			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+			retain-state-suspended;
+			default-state = "off";
+		};
+
+		led-j14-pins8-9 {
+			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
+			retain-state-suspended;
+			default-state = "off";
+		};
+
+		led-j46-pin2 {
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+			retain-state-suspended;
+			default-state = "off";
+		};
+
+		led-j46-pin3 {
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			retain-state-suspended;
+			default-state = "off";
+		};
+	};
+
+	backlight-lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	backlight_lvds0: backlight-lvds0 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	panel-lvds0 {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds0>;
+		power-supply = <&reg_3p3v>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6dl-nit6xlite-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6dl-nit6xlite-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "microchip,sst25vf016b";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy>;
+	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	/delete-property/ interrupts;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			txen-skew-ps = <0>;
+			txc-skew-ps = <3000>;
+			rxdv-skew-ps = <0>;
+			rxc-skew-ps = <3000>;
+			rxd0-skew-ps = <0>;
+			rxd1-skew-ps = <0>;
+			rxd2-skew-ps = <0>;
+			rxd3-skew-ps = <0>;
+			txd0-skew-ps = <0>;
+			txd1-skew-ps = <0>;
+			txd2-skew-ps = <0>;
+			txd3-skew-ps = <0>;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	touchscreen@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+	};
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-source;
+	};
+
+	rtc@6f {
+		compatible = "isil,isl1208";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		reg = <0x6f>;
+		interrupts-extended = <&gpio2 26 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_j10>;
+	pinctrl-1 = <&pinctrl_j28>;
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x000b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			/* Phy reset */
+			MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x0f0b0
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
+			MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+		>;
+	};
+
+	pinctrl_gpio_keys: gpio-keysgrp {
+		fsl,pins = <
+			/* Home Button: J14 pin 5 */
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
+			/* Back Button: J14 pin 7 */
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL	0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL	0x4001b8b1
+			MX6QDL_PAD_GPIO_16__I2C3_SDA	0x4001b8b1
+			/* Touch IRQ: J7 pin 4 */
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x1b0b0
+			/* tcs2004 IRQ */
+			MX6QDL_PAD_EIM_LBA__GPIO2_IO27	0x1b0b0
+			/* tsc2004 reset */
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10	0x0b0b0
+		>;
+	};
+
+	pinctrl_j10: j10grp {
+		fsl,pins = <
+			/* Broadcom WiFi module pins */
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x1b0b0
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
+			MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09	0x0b0b0
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x1b0b0
+			MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT	0x000b0
+		>;
+	};
+
+	pinctrl_j28: j28grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x0b0b0
+			MX6QDL_PAD_GPIO_3__GPIO1_IO03		0x0b0b0
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x030b0
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x0b0b0
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0b0b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_wlan_vmmc: wlan-vmmcgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x030b0
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x1b0b0
+		>;
+	};
+
+	pinctrl_sgtl5000: sgtl5000grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x000b0
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x1b0b0
+			/* power enable, high active */
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x000b0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
+		>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_wlan_vmmc>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi
new file mode 100644
index 000000000000..ef0c26688446
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi
@@ -0,0 +1,835 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2015 Boundary Devices, Inc.
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0xF0000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1>;
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_wlan_vmmc: regulator-wlan-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wlan_vmmc>;
+		regulator-name = "reg_wlan_vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	reg_can_xcvr: regulator-can-xcvr {
+		compatible = "regulator-fixed";
+		regulator-name = "CAN XCVR";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can_xcvr>;
+		gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-power {
+			label = "Power Button";
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		key-menu {
+			label = "Menu";
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+		};
+
+		key-home {
+			label = "Home";
+			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+		};
+
+		key-back {
+			label = "Back";
+			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	i2c-mux-2 {
+		compatible = "i2c-mux-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c2mux>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		mux-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH
+			     &gpio4 15 GPIO_ACTIVE_HIGH>;
+		i2c-parent = <&i2c2>;
+		idle-state = <0>;
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	i2c-mux-3 {
+		compatible = "i2c-mux-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3mux>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		mux-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+		i2c-parent = <&i2c3>;
+		idle-state = <0>;
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-speaker-enable {
+			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+			retain-state-suspended;
+			default-state = "off";
+		};
+
+		led-ttymxc4-rs232 {
+			gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;
+			retain-state-suspended;
+			default-state = "on";
+		};
+	};
+
+	backlight_lcd: backlight-lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	backlight_lvds0: backlight-lvds0 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	backlight_lvds1: backlight-lvds1 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	lcd_display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_j15>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel-lcd {
+		compatible = "okaya,rs800480t-7x0gp";
+		backlight = <&backlight_lcd>;
+		power-supply = <&reg_3p3v>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	panel-lvds0 {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds0>;
+		power-supply = <&reg_3p3v>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	panel-lvds1 {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds1>;
+		power-supply = <&reg_3p3v>;
+
+		port {
+			panel_in_lvds1: endpoint {
+				remote-endpoint = <&lvds1_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6q-nitrogen6_max-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6q-nitrogen6_max-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "microchip,sst25vf016b";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy>;
+	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	/delete-property/ interrupts;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			txen-skew-ps = <0>;
+			txc-skew-ps = <3000>;
+			rxdv-skew-ps = <0>;
+			rxc-skew-ps = <3000>;
+			rxd0-skew-ps = <0>;
+			rxd1-skew-ps = <0>;
+			rxd2-skew-ps = <0>;
+			rxd3-skew-ps = <0>;
+			txd0-skew-ps = <0>;
+			txd1-skew-ps = <0>;
+			txd2-skew-ps = <0>;
+			txd3-skew-ps = <0>;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	rtc: rtc@68 {
+		compatible = "microcrystal,rv4162";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rv4162>;
+		reg = <0x68>;
+		interrupts-extended = <&gpio4 6 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	touchscreen@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+	};
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-source;
+	};
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_can_xcvr: can-xcvrgrp {
+		fsl,pins = <
+			/* Flexcan XCVR enable */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x000b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			/* Phy reset */
+			MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x0f0b0
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
+			MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+		>;
+	};
+
+	pinctrl_gpio_keys: gpio-keysgrp {
+		fsl,pins = <
+			/* Power Button */
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
+			/* Menu Button */
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+			/* Home Button */
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
+			/* Back Button */
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
+			/* Volume Up Button */
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
+			/* Volume Down Button */
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL	0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2mux: i2c2muxgrp {
+		fsl,pins = <
+			/* ov5642 camera i2c enable */
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20	0x000b0
+			/* ov5640_mipi camera i2c enable */
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15	0x000b0
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL	0x4001b8b1
+			MX6QDL_PAD_GPIO_16__I2C3_SDA	0x4001b8b1
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c3mux: i2c3muxgrp {
+		fsl,pins = <
+			/* PCIe I2C enable */
+			MX6QDL_PAD_EIM_OE__GPIO2_IO25	0x000b0
+		>;
+	};
+
+	pinctrl_j15: j15grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			/* PCIe reset */
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31	0x000b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__PWM1_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_rv4162: rv4162grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06	0x1b0b0
+		>;
+	};
+
+	pinctrl_sgtl5000: sgtl5000grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x000b0
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x130b1
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x030b1
+			/* RS485 RX Enable: pull up */
+			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10	0x1b0b1
+			/* RS485 DEN: pull down */
+			MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x030b1
+			/* RS485/!RS232 Select: pull down (rs232) */
+			MX6QDL_PAD_EIM_CS1__GPIO2_IO24		0x030b1
+			/* ON: pull down */
+			MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x030b1
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x0b0b0
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x1b0b0
+			/* power enable, high active */
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x000b0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x100b0
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+		>;
+	};
+
+	pinctrl_wlan_vmmc: wlan-vmmcgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x100b0
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x000b0
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x000b0
+			MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT	0x000b0
+		>;
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+
+	lvds-channel@1 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds1_out: endpoint {
+				remote-endpoint = <&panel_in_lvds1>;
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio6 31 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&reg_wlan_vmmc>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+		ref-clock-frequency = <38400000>;
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	vmmc-supply = <&reg_1p8v>;
+	keep-power-in-suspend;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi
index 92d09a3ebe0e..03fe053880ca 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi
@@ -17,7 +17,7 @@
 
 	backlight_lcd: backlight-lcd {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		power-supply = <&reg_3p3v>;
@@ -26,7 +26,7 @@
 
 	backlight_lvds0: backlight-lvds0 {
 		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
+		pwms = <&pwm4 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		power-supply = <&reg_3p3v>;
@@ -47,38 +47,38 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			wakeup-source;
 		};
 
-		menu {
+		key-menu {
 			label = "Menu";
 			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_MENU>;
 		};
 
-		home {
+		key-home {
 			label = "Home";
 			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_HOME>;
 		};
 
-		back {
+		key-back {
 			label = "Back";
 			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_BACK>;
 		};
 
-		volume-up {
+		key-volume-up {
 			label = "Volume Up";
 			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
 		};
 
-		volume-down {
+		key-volume-down {
 			label = "Volume Down";
 			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
@@ -114,6 +114,7 @@
 	panel-lcd {
 		compatible = "okaya,rs800480t-7x0gp";
 		backlight = <&backlight_lcd>;
+		power-supply = <&reg_3p3v>;
 
 		port {
 			lcd_panel_in: endpoint {
@@ -125,6 +126,7 @@
 	panel-lvds0 {
 		compatible = "hannstar,hsd100pxn1";
 		backlight = <&backlight_lvds0>;
+		power-supply = <&reg_3p3v>;
 
 		port {
 			panel_in_lvds0: endpoint {
@@ -136,6 +138,7 @@
 	panel-lvds1 {
 		compatible = "hannstar,hsd100pxn1";
 		backlight = <&backlight_lvds1>;
+		power-supply = <&reg_3p3v>;
 
 		port {
 			panel_in_lvds1: endpoint {
@@ -252,7 +255,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "microchip,sst25vf016b";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
@@ -263,6 +266,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
@@ -285,6 +289,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_sgtl5000>;
 		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_3p3v>;
@@ -639,7 +644,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
@@ -652,7 +656,6 @@
 };
 
 &pwm4 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi
new file mode 100644
index 000000000000..6a353a99e13d
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi
@@ -0,0 +1,680 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2013 Boundary Devices, Inc.
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 0>;
+		enable-active-high;
+	};
+
+	reg_can_xcvr: regulator-can-xcvr {
+		compatible = "regulator-fixed";
+		regulator-name = "CAN XCVR";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can_xcvr>;
+		gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_wlan_vmmc: regulator-wlan-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wlan_vmmc>;
+		regulator-name = "reg_wlan_vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1>;
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-power {
+			label = "Power Button";
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		key-menu {
+			label = "Menu";
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+		};
+
+		key-home {
+			label = "Home";
+			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+		};
+
+		key-back {
+			label = "Back";
+			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6q-nitrogen6x-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6q-nitrogen6x-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+
+	backlight_lcd: backlight-lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	backlight_lvds: backlight-lvds {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	lcd_display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_j15>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel-lcd {
+		compatible = "okaya,rs800480t-7x0gp";
+		backlight = <&backlight_lcd>;
+		power-supply = <&reg_3p3v>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	panel-lvds0 {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds>;
+		power-supply = <&reg_3p3v>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "sst,sst25vf016b", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "bootloader";
+			reg = <0x0 0xc0000>;
+		};
+
+		partition@c0000 {
+			label = "env";
+			reg = <0xc0000 0x2000>;
+		};
+
+		partition@c2000 {
+			label = "splash";
+			reg = <0xc2000 0x13e000>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy>;
+	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	/delete-property/ interrupts;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			txen-skew-ps = <0>;
+			txc-skew-ps = <3000>;
+			rxdv-skew-ps = <0>;
+			rxc-skew-ps = <3000>;
+			rxd0-skew-ps = <0>;
+			rxd1-skew-ps = <0>;
+			rxd2-skew-ps = <0>;
+			rxd3-skew-ps = <0>;
+			txd0-skew-ps = <0>;
+			txd1-skew-ps = <0>;
+			txd2-skew-ps = <0>;
+			txd3-skew-ps = <0>;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	rtc: rtc@6f {
+		compatible = "isil,isl1208";
+		reg = <0x6f>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	touchscreen@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+	};
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-source;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* SGTL5000 sys_mclk */
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x030b0
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x1b0b0
+		>;
+	};
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_can_xcvr: can-xcvrgrp {
+		fsl,pins = <
+			/* Flexcan XCVR enable */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19  0x000b1	/* CS */
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			/* Phy reset */
+			MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x000b0
+			MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+		>;
+	};
+
+	pinctrl_gpio_keys: gpio-keysgrp {
+		fsl,pins = <
+			/* Power Button */
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
+			/* Menu Button */
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+			/* Home Button */
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
+			/* Back Button */
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
+			/* Volume Up Button */
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
+			/* Volume Down Button */
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_16__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_j15: j15grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x030b0
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID	0x17059
+			MX6QDL_PAD_KEY_COL4__USB_OTG_OC	0x1b0b0
+			/* power enable, high active */
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x000b0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17071
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10071
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17071
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17071
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17071
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17071
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0	/* CD */
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+			MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0	/* CD */
+		>;
+	};
+
+	pinctrl_wlan_vmmc: wlan-vmmcgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x100b0
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x000b0
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x000b0
+			MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT	0x000b0
+		>;
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&reg_wlan_vmmc>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+		ref-clock-frequency = <38400000>;
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira-peb-av-02.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira-peb-av-02.dtsi
new file mode 100644
index 000000000000..0020dbb1722c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira-peb-av-02.dtsi
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 PHYTEC Messtechnik
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+/ {
+	display: display0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_disp0>;
+		interface-pix-fmt = "rgb24";
+		status = "disabled";
+
+		port@0 {
+			reg = <0>;
+
+			display0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			display0_out: endpoint {
+				remote-endpoint = <&peb_panel_lcd_in>;
+			};
+		};
+	};
+
+	panel-lcd {
+		compatible = "edt,etm0700g0edh6";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_disp0_pwr>;
+		power-supply = <&reg_display>;
+		enable-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		backlight = <&backlight>;
+		status = "disabled";
+
+		port {
+			peb_panel_lcd_in: endpoint {
+				remote-endpoint = <&display0_out>;
+			};
+		};
+	};
+
+	reg_display: regulator-peb-display {
+		compatible = "regulator-fixed";
+		regulator-name = "peb-display";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&i2c1 {
+	edt_ft5x06: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_edt_ft5x06>;
+		reg = <0x38>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <2 IRQ_TYPE_NONE>;
+		status = "disabled";
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&iomuxc {
+	pinctrl_disp0: disp0grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x1b080
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
+		>;
+	};
+
+	pinctrl_disp0_pwr: disp0pwrgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22			0x1b0b0
+		>;
+	};
+
+	pinctrl_edt_ft5x06: edtft5x06grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA2__GPIO3_IO02			0xb0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira-peb-eval-01.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira-peb-eval-01.dtsi
new file mode 100644
index 000000000000..fc78acc9f5c5
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira-peb-eval-01.dtsi
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 PHYTEC Messtechnik
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+		status = "disabled";
+
+		key-power {
+			label = "Power Button";
+			gpios = <&gpio5 28 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+
+		key-sleep {
+			label = "Sleep Button";
+			gpios = <&gpio6 18 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_SLEEP>;
+		};
+	};
+
+	user_leds: user-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_user_leds>;
+		status = "disabled";
+
+		user-led1 {
+			gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+			default-state = "on";
+		};
+
+		user-led2 {
+			gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+			default-state = "on";
+		};
+
+		user-led3 {
+			gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+			default-state = "on";
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT6__GPIO6_IO18		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28	0x1b0b0
+		>;
+	};
+
+	pinctrl_user_leds: userledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1b0b0
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira-peb-wlbt-05.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira-peb-wlbt-05.dtsi
new file mode 100644
index 000000000000..08b2dd06580a
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira-peb-wlbt-05.dtsi
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2021 PHYTEC Messtechnik GmbH
+ * Author: Yunus Bas <y.bas@phytec.de>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	reg_wl_en: regulator-wl-en {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan_en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wl>;
+		gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		status = "disabled";
+	};
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_bt>;
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+};
+
+&usdhc3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3_wl>;
+	vmmc-supply = <&reg_wl_en>;
+	bus-width = <4>;
+	non-removable;
+	no-1-8-v;
+	status = "disabled";
+
+	brmcf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+	};
+};
+
+&iomuxc {
+	pinctrl_uart3_bt: uart3-btgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_EB3__UART3_RTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0xb0b1	/* BT ENABLE */
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0xb0b1	/* DEV WAKEUP */
+			MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26	0xb0b1  /* HOST WAKEUP */
+		>;
+	};
+
+	pinctrl_usdhc3_wl: usdhc3-wlgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_wl: wlgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02      0xb0b1	/* WLAN ENABLE */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi
index 019938562aa9..a3c2811e9c6f 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi
@@ -15,7 +15,7 @@
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		power-supply = <&reg_backlight>;
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		status = "okay";
 	};
 
@@ -25,17 +25,17 @@
 		pinctrl-0 = <&pinctrl_gpioleds>;
 		status = "disabled";
 
-		red {
+		led-red {
 			label = "phyboard-mira:red";
 			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>;
 		};
 
-		green {
+		led-green {
 			label = "phyboard-mira:green";
 			gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>;
 		};
 
-		blue {
+		led-blue {
 			label = "phyboard-mira:blue";
 			gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc0";
@@ -145,8 +145,11 @@
 };
 
 &i2c1 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	clock-frequency = <400000>;
 	status = "disabled";
 
@@ -159,7 +162,7 @@
 		interrupts = <12 IRQ_TYPE_NONE>;
 		status = "disabled";
 
-		stmpe_touchscreen {
+		touchscreen {
 			compatible = "st,stmpe-ts";
 			st,sample-time = <4>;
 			st,mod-12b = <1>;
@@ -179,14 +182,17 @@
 		pinctrl-0 = <&pinctrl_rtc_int>;
 		reg = <0x68>;
 		interrupt-parent = <&gpio7>;
-		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
 		status = "disabled";
 	};
 };
 
 &i2c2 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	clock-frequency = <100000>;
 	status = "disabled";
 };
@@ -218,7 +224,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
@@ -256,6 +261,7 @@
 	pinctrl-0 = <&pinctrl_usdhc1>;
 	cd-gpios = <&gpio6 31 GPIO_ACTIVE_LOW>;
 	no-1-8-v;
+	disable-wp;
 	status = "disabled";
 };
 
@@ -299,6 +305,20 @@
 		>;
 	};
 
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x4001b8b1
+		>;
+	};
+
 	pinctrl_i2c2: i2c2grp {
 		fsl,pins = <
 			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
@@ -306,10 +326,10 @@
 		>;
 	};
 
-	pinctrl_i2c1: i2c1grp {
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
 		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x4001b8b1
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x4001b8b1
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pbab01.dtsi
index 51d28e275aa6..e40041871b28 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pbab01.dtsi
@@ -10,22 +10,18 @@
 		stdout-path = &uart4;
 	};
 
-	regulators {
-		sound_1v8: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "i2s-audio-1v8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
+	sound_1v8: regulator-sound-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "i2s-audio-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
 
-		sound_3v3: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "i2s-audio-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
+	sound_3v3: regulator-sound-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "i2s-audio-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
 	};
 
 	tlv320_mclk: oscillator {
@@ -75,7 +71,7 @@
 &audmux {
 	status = "okay";
 
-	ssi2 {
+	mux-ssi2 {
 		fsl,audmux-port = <1>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_SYN |
@@ -87,7 +83,7 @@
 		>;
 	};
 
-	pins5 {
+	mux-pins5 {
 		fsl,audmux-port = <4>;
 		fsl,port-config = <
 			IMX_AUDMUX_V2_PTCR_SYN
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi
new file mode 100644
index 000000000000..aa9a442852f4
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi
@@ -0,0 +1,465 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Phytec phyFLEX-i.MX6 Quad";
+	compatible = "phytec,imx6q-pfla02", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 15 0>;
+		enable-active-high;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1_vbus>;
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 0 0>;
+		enable-active-high;
+	};
+
+	gpio_leds: leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+		compatible = "gpio-leds";
+
+		led_green: led-green {
+			label = "phyflex:green";
+			gpios = <&gpio1 30 0>;
+		};
+
+		led_red: led-red {
+			label = "phyflex:red";
+			gpios = <&gpio2 31 0>;
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "disabled";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "disabled";
+};
+
+&ecspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+
+	som_flash: flash@0 {
+		compatible = "m25p80", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-handle = <&ethphy>;
+	phy-mode = "rgmii";
+	phy-reset-duration = <10>; /* in msecs */
+	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+	phy-supply = <&vdd_eth_io_reg>;
+	status = "disabled";
+
+	fec_mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			txc-skew-ps = <1680>;
+			rxc-skew-ps = <1860>;
+		};
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	som_eeprom: eeprom@50 {
+		compatible = "catalyst,24c32", "atmel,24c32";
+		pagesize = <32>;
+		reg = <0x50>;
+	};
+
+	pmic@58 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		compatible = "dlg,da9063";
+		reg = <0x58>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>; /* active-low GPIO2_9 */
+		#interrupt-cells = <2>;
+		interrupt-controller;
+
+		regulators {
+			vddcore_reg: bcore1 {
+				regulator-min-microvolt = <730000>;
+				regulator-max-microvolt = <1380000>;
+				regulator-always-on;
+			};
+
+			vddsoc_reg: bcore2 {
+				regulator-min-microvolt = <730000>;
+				regulator-max-microvolt = <1380000>;
+				regulator-always-on;
+			};
+
+			vdd_ddr3_reg: bpro {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+			};
+
+			vdd_3v3_reg: bperi {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_buckmem_reg: bmem {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_eth_reg: bio {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vdd_eth_io_reg: ldo4 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+
+			vdd_mx6_snvs_reg: ldo5 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vdd_3v3_pmic_io_reg: ldo6 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_sd0_reg: ldo9 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vdd_sd1_reg: ldo10 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vdd_mx6_high_reg: ldo11 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+		};
+
+		da9063_rtc: rtc {
+			compatible = "dlg,da9063-rtc";
+		};
+
+		da9063_wdog: watchdog {
+			compatible = "dlg,da9063-watchdog";
+		};
+
+		onkey {
+			compatible = "dlg,da9063-onkey";
+			status = "disabled";
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <100000>;
+};
+
+&iomuxc {
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x80000000 /* CS0 */
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x80000000 /* Reset GPIO */
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+			MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D16__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x80000000 /* Green LED */
+			MX6QDL_PAD_EIM_EB3__GPIO2_IO31		0x80000000 /* Red LED */
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <MX6QDL_PAD_DI0_PIN15__GPIO4_IO17  0x80000000>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <MX6QDL_PAD_SD4_DAT1__GPIO2_IO09	0x80000000>; /* PMIC interrupt */
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D30__UART3_CTS_B		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh1_vbus: usbh1vbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x80000000
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_cdwp: usdhc3cdwpgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
+		>;
+	};
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT16__AUD5_TXC	0x130b0
+			MX6QDL_PAD_DISP0_DAT17__AUD5_TXD	0x110b0
+			MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS	0x130b0
+			MX6QDL_PAD_DISP0_DAT19__AUD5_RXD	0x130b0
+		>;
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio4 17 GPIO_ACTIVE_LOW>;
+	status = "disabled";
+};
+
+&reg_arm {
+	vin-supply = <&vddcore_reg>;
+};
+
+&reg_pu {
+	vin-supply = <&vddsoc_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&vddsoc_reg>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "disabled";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "disabled";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "disabled";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&vdd_sd1_reg>;
+	status = "disabled";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3
+		     &pinctrl_usdhc3_cdwp>;
+	cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&vdd_sd0_reg>;
+	status = "disabled";
+};
+
+&wdog1 {
+	/*
+	 * Rely on PMIC reboot handler. Internal i.MX6 watchdog, that is also
+	 * used for reboot, does not reset all external PMIC voltages on reset.
+	 */
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi
index a80aa08a37cb..85e278eb2016 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi
@@ -78,8 +78,11 @@
 };
 
 &i2c3 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	clock-frequency = <400000>;
 	status = "okay";
 
@@ -97,6 +100,7 @@
 		interrupt-parent = <&gpio1>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -113,6 +117,16 @@
 			dlg,use-sw-pm;
 		};
 
+		thermal {
+			compatible = "dlg,da9062-thermal";
+			status = "disabled";
+		};
+
+		gpio {
+			compatible = "dlg,da9062-gpio";
+			status = "disabled";
+		};
+
 		regulators {
 			vdd_arm: buck1 {
 				regulator-name = "vdd_arm";
@@ -259,6 +273,13 @@
 		>;
 	};
 
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06	0x4001b8b1
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05	0x4001b8b1
+		>;
+	};
+
 	pinctrl_ecspi1: ecspi1grp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
@@ -289,3 +310,11 @@
 		>;
 	};
 };
+
+&wdog1 {
+	/*
+	 * Rely on PMIC reboot handler. Internal i.MX6 watchdog, that is also
+	 * used for reboot, does not reset all external PMIC voltages on reset.
+	 */
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-pico-dwarf.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-pico-dwarf.dtsi
index 3a968782e854..3a968782e854 100644
--- a/arch/arm/boot/dts/imx6qdl-pico-dwarf.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-pico-dwarf.dtsi
diff --git a/arch/arm/boot/dts/imx6qdl-pico-hobbit.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-pico-hobbit.dtsi
index 144c4727fbc7..144c4727fbc7 100644
--- a/arch/arm/boot/dts/imx6qdl-pico-hobbit.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-pico-hobbit.dtsi
diff --git a/arch/arm/boot/dts/imx6qdl-pico-nymph.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-pico-nymph.dtsi
index 3d56a4216448..3d56a4216448 100644
--- a/arch/arm/boot/dts/imx6qdl-pico-nymph.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-pico-nymph.dtsi
diff --git a/arch/arm/boot/dts/imx6qdl-pico-pi.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-pico-pi.dtsi
index b823dce62e63..b823dce62e63 100644
--- a/arch/arm/boot/dts/imx6qdl-pico-pi.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-pico-pi.dtsi
diff --git a/arch/arm/boot/dts/imx6qdl-pico.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-pico.dtsi
index f7a56d6b160c..c39a9ebdaba1 100644
--- a/arch/arm/boot/dts/imx6qdl-pico.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-pico.dtsi
@@ -233,7 +233,6 @@
 		pinctrl-0 = <&pinctrl_ov5645>;
 		reg = <0x3c>;
 		clocks = <&clks IMX6QDL_CLK_CKO2>;
-		clock-names = "xclk";
 		clock-frequency = <24000000>;
 		vdddo-supply = <&reg_1p8v>;
 		vdda-supply = <&reg_2p8v>;
diff --git a/arch/arm/boot/dts/imx6qdl-prti6q.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-prti6q.dtsi
index 19578f660b09..36f84f4da6b0 100644
--- a/arch/arm/boot/dts/imx6qdl-prti6q.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-prti6q.dtsi
@@ -69,6 +69,7 @@
 	vbus-supply = <&reg_usb_h1_vbus>;
 	phy_type = "utmi";
 	dr_mode = "host";
+	disable-over-current;
 	status = "okay";
 };
 
@@ -78,10 +79,18 @@
 	pinctrl-0 = <&pinctrl_usbotg>;
 	phy_type = "utmi";
 	dr_mode = "host";
-	disable-over-current;
+	over-current-active-low;
 	status = "okay";
 };
 
+&usbphynop1 {
+	status = "disabled";
+};
+
+&usbphynop2 {
+	status = "disabled";
+};
+
 &usdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
@@ -94,6 +103,9 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	bus-width = <8>;
 	non-removable;
+	no-1-8-v;
+	no-sd;
+	no-sdio;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-rex.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-rex.dtsi
new file mode 100644
index 000000000000..22d5918ee4d8
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-rex.dtsi
@@ -0,0 +1,355 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2014 FEDEVEL, Inc.
+ *
+ * Author: Robert Nelson <robertcnelson@gmail.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usbh1_vbus: regulator-usbh1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbh1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg_vbus: regulator-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		led0: led-usr {
+			label = "usr";
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6-rex-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6-rex-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pca9535: gpio-expander@27 {
+		compatible = "nxp,pca9535";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pca9535>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	eeprom@57 {
+		compatible = "atmel,24c02";
+		reg = <0x57>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* SGTL5000 sys_mclk */
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x030b0
+		>;
+	};
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+			/* CS */
+			MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26	0x000b1
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK	0x100b1
+			/* CS */
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x000b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			/* Phy reset */
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x000b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			/* user led */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000
+		>;
+	};
+
+	pinctrl_pca9535: pca9535grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x17059
+	   >;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			/* power enable, high active */
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x10b0
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_EIM_D21__USB_OTG_OC		0x1b0b0
+			/* power enable, high active */
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x10b0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			/* CD */
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
+			/* WP */
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1f0b0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			/* CD */
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x1b0b0
+			/* WP */
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1f0b0
+		>;
+	};
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usbh1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi
new file mode 100644
index 000000000000..b9dde0af3b99
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi
@@ -0,0 +1,866 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-user {
+			label = "debug";
+			gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-home {
+			label = "Home";
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+			wakeup-source;
+		};
+
+		key-back {
+			label = "Back";
+			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+			wakeup-source;
+		};
+
+		key-program {
+			label = "Program";
+			gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROGRAM>;
+			wakeup-source;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio5 14 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
+		};
+	};
+
+	clocks {
+		codec_osc: anaclk2 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24576000>;
+		};
+	};
+
+	reg_audio: regulator-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "cs42888_supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&max7310_b 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&max7310_c 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can_en: regulator-can-en {
+		compatible = "regulator-fixed";
+		regulator-name = "can-en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&max7310_b 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can_stby: regulator-can-stby {
+		compatible = "regulator-fixed";
+		regulator-name = "can-stby";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&max7310_b 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_can_en>;
+	};
+
+	sound-cs42888 {
+		compatible = "fsl,imx6-sabreauto-cs42888",
+			"fsl,imx-audio-cs42888";
+		model = "imx-cs42888";
+		audio-cpu = <&esai>;
+		audio-asrc = <&asrc>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"Line Out Jack", "AOUT1L",
+			"Line Out Jack", "AOUT1R",
+			"Line Out Jack", "AOUT2L",
+			"Line Out Jack", "AOUT2R",
+			"Line Out Jack", "AOUT3L",
+			"Line Out Jack", "AOUT3R",
+			"Line Out Jack", "AOUT4L",
+			"Line Out Jack", "AOUT4R",
+			"AIN1L", "Line In Jack",
+			"AIN1R", "Line In Jack",
+			"AIN2L", "Line In Jack",
+			"AIN2R", "Line In Jack";
+	};
+
+	spdif_in: spdif-in {
+		compatible = "linux,spdif-dir";
+		#sound-dai-cells = <0>;
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-sabreauto-spdif",
+			     "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		audio-cpu = <&spdif>;
+		audio-codec = <&spdif_in>;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		status = "okay";
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3mux>;
+		mux-gpios = <&gpio5 4 0>;
+		i2c-parent = <&i2c3>;
+		idle-state = <0>;
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			adv7180: camera@21 {
+				compatible = "adi,adv7180";
+				reg = <0x21>;
+				powerdown-gpios = <&max7310_b 2 GPIO_ACTIVE_LOW>;
+				interrupt-parent = <&gpio1>;
+				interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+
+				port {
+					adv7180_to_ipu1_csi0_mux: endpoint {
+						remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+						bus-width = <8>;
+					};
+				};
+			};
+
+			max7310_a: gpio@30 {
+				compatible = "maxim,max7310";
+				reg = <0x30>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			max7310_b: gpio@32 {
+				compatible = "maxim,max7310";
+				reg = <0x32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_max7310>;
+				reset-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+			};
+
+			max7310_c: gpio@34 {
+				compatible = "maxim,max7310";
+				reg = <0x34>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			light-sensor@44 {
+				compatible = "isil,isl29023";
+				reg = <0x44>;
+				interrupt-parent = <&gpio5>;
+				interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
+			};
+
+			magnetometer@e {
+				compatible = "fsl,mag3110";
+				reg = <0x0e>;
+				interrupt-parent = <&gpio2>;
+				interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+			};
+
+			accelerometer@1c {
+				compatible = "fsl,mma8451";
+				reg = <0x1c>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mma8451_int>;
+				interrupt-parent = <&gpio6>;
+				interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
+			};
+		};
+	};
+};
+
+&ipu1_csi0_from_ipu1_csi0_mux {
+	bus-width = <8>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&adv7180_to_ipu1_csi0_mux>;
+	bus-width = <8>;
+};
+
+&ipu1_csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_PLL4_BYPASS_SRC>,
+			  <&clks IMX6QDL_PLL4_BYPASS>,
+			  <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
+			  <&clks IMX6QDL_CLK_PLL4_POST_DIV>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_LVDS2_IN>,
+				 <&clks IMX6QDL_PLL4_BYPASS_SRC>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+	assigned-clock-rates = <0>, <0>, <0>, <0>, <24576000>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
+	status = "disabled"; /* pin conflict with WEIM NOR */
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p32", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&esai {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esai>;
+	assigned-clocks = <&clks IMX6QDL_CLK_ESAI_SEL>,
+			  <&clks IMX6QDL_CLK_ESAI_EXTAL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <0>, <24576000>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	/delete-property/ interrupts;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+	fsl,magic-packet;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can_stby>;
+	status = "disabled"; /* pin conflict with fec */
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can_stby>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi_cec>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	codec: cs42888@48 {
+		compatible = "cirrus,cs42888";
+		reg = <0x48>;
+		clocks = <&codec_osc>;
+		clock-names = "mclk";
+		VA-supply = <&reg_audio>;
+		VD-supply = <&reg_audio>;
+		VLS-supply = <&reg_audio>;
+		VLC-supply = <&reg_audio>;
+	};
+
+	touchscreen@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_egalax_int>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x80000000
+			MX6QDL_PAD_SD2_DAT2__GPIO1_IO13  0x80000000
+			MX6QDL_PAD_GPIO_18__SD3_VSELECT 0x17059
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+		>;
+	};
+
+	pinctrl_ecspi1_cs: ecspi1csgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000
+		>;
+	};
+
+	pinctrl_egalax_int: egalax-intgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0xb0b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_KEY_COL2__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+		>;
+	};
+
+	pinctrl_esai: esaigrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1b030
+			MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS    0x1b030
+			MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2 0x1b030
+			MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3     0x1b030
+			MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1  0x1b030
+			MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0   0x1b030
+			MX6QDL_PAD_GPIO_17__ESAI_TX0        0x1b030
+			MX6QDL_PAD_NANDF_CS3__ESAI_TX1      0x1b030
+			MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK   0x1b030
+			MX6QDL_PAD_GPIO_9__ESAI_RX_FS       0x1b030
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX        0x17059
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x17059
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x17059
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x17059
+		>;
+	};
+
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__GPIO1_IO11		0x1b0b0
+			MX6QDL_PAD_SD2_DAT3__GPIO1_IO12		0x1b0b0
+			MX6QDL_PAD_SD4_DAT4__GPIO2_IO12		0x1b0b0
+			MX6QDL_PAD_SD4_DAT7__GPIO2_IO15		0x1b0b0
+			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x80000000
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+			MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
+		>;
+	};
+
+	pinctrl_hdmi_cec: hdmicecgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE	0x1f8b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__I2C2_SCL	0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL  0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3mux: i2c3muxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x0b0b1
+		>;
+	};
+
+	pinctrl_ipu1_csi0: ipu1csi0grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19  0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0
+			MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC    0x1b0b0
+			MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC   0x1b0b0
+		>;
+	};
+
+	pinctrl_max7310: max7310grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x1b0b0
+		>;
+	};
+
+	pinctrl_mma8451_int: mma8451intgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0xb0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_gpt_input_capture0: gptinputcapture0grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT0__GPT_CAPTURE1	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpt_input_capture1: gptinputcapture1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__GPT_CAPTURE2	0x1b0b0
+		>;
+	};
+
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__SPDIF_IN 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170b9
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170b9
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170b9
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170f9
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170f9
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170f9
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170f9
+		>;
+	};
+
+	pinctrl_weim_cs0: weimcs0grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_CS0__EIM_CS0_B		0xb0b1
+		>;
+	};
+
+	pinctrl_weim_nor: weimnorgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__EIM_OE_B		0xb0b1
+			MX6QDL_PAD_EIM_RW__EIM_RW		0xb0b1
+			MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B		0xb060
+			MX6QDL_PAD_EIM_D16__EIM_DATA16		0x1b0b0
+			MX6QDL_PAD_EIM_D17__EIM_DATA17		0x1b0b0
+			MX6QDL_PAD_EIM_D18__EIM_DATA18		0x1b0b0
+			MX6QDL_PAD_EIM_D19__EIM_DATA19		0x1b0b0
+			MX6QDL_PAD_EIM_D20__EIM_DATA20		0x1b0b0
+			MX6QDL_PAD_EIM_D21__EIM_DATA21		0x1b0b0
+			MX6QDL_PAD_EIM_D22__EIM_DATA22		0x1b0b0
+			MX6QDL_PAD_EIM_D23__EIM_DATA23		0x1b0b0
+			MX6QDL_PAD_EIM_D24__EIM_DATA24		0x1b0b0
+			MX6QDL_PAD_EIM_D25__EIM_DATA25		0x1b0b0
+			MX6QDL_PAD_EIM_D26__EIM_DATA26		0x1b0b0
+			MX6QDL_PAD_EIM_D27__EIM_DATA27		0x1b0b0
+			MX6QDL_PAD_EIM_D28__EIM_DATA28		0x1b0b0
+			MX6QDL_PAD_EIM_D29__EIM_DATA29		0x1b0b0
+			MX6QDL_PAD_EIM_D30__EIM_DATA30		0x1b0b0
+			MX6QDL_PAD_EIM_D31__EIM_DATA31		0x1b0b0
+			MX6QDL_PAD_EIM_A23__EIM_ADDR23		0xb0b1
+			MX6QDL_PAD_EIM_A22__EIM_ADDR22		0xb0b1
+			MX6QDL_PAD_EIM_A21__EIM_ADDR21		0xb0b1
+			MX6QDL_PAD_EIM_A20__EIM_ADDR20		0xb0b1
+			MX6QDL_PAD_EIM_A19__EIM_ADDR19		0xb0b1
+			MX6QDL_PAD_EIM_A18__EIM_ADDR18		0xb0b1
+			MX6QDL_PAD_EIM_A17__EIM_ADDR17		0xb0b1
+			MX6QDL_PAD_EIM_A16__EIM_ADDR16		0xb0b1
+			MX6QDL_PAD_EIM_DA15__EIM_AD15		0xb0b1
+			MX6QDL_PAD_EIM_DA14__EIM_AD14		0xb0b1
+			MX6QDL_PAD_EIM_DA13__EIM_AD13		0xb0b1
+			MX6QDL_PAD_EIM_DA12__EIM_AD12		0xb0b1
+			MX6QDL_PAD_EIM_DA11__EIM_AD11		0xb0b1
+			MX6QDL_PAD_EIM_DA10__EIM_AD10		0xb0b1
+			MX6QDL_PAD_EIM_DA9__EIM_AD09		0xb0b1
+			MX6QDL_PAD_EIM_DA8__EIM_AD08		0xb0b1
+			MX6QDL_PAD_EIM_DA7__EIM_AD07		0xb0b1
+			MX6QDL_PAD_EIM_DA6__EIM_AD06		0xb0b1
+			MX6QDL_PAD_EIM_DA5__EIM_AD05		0xb0b1
+			MX6QDL_PAD_EIM_DA4__EIM_AD04		0xb0b1
+			MX6QDL_PAD_EIM_DA3__EIM_AD03		0xb0b1
+			MX6QDL_PAD_EIM_DA2__EIM_AD02		0xb0b1
+			MX6QDL_PAD_EIM_DA1__EIM_AD01		0xb0b1
+			MX6QDL_PAD_EIM_DA0__EIM_AD00		0xb0b1
+		>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing-hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&weim {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_weim_nor &pinctrl_weim_cs0>;
+	ranges = <0 0 0x08000000 0x08000000>;
+	status = "disabled"; /* pin conflict with SPI NOR */
+
+	flash@0,0 {
+		compatible = "cfi-flash";
+		reg = <0 0 0x02000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		bank-width = <2>;
+		fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000
+				0x0000c000 0x1404a38e 0x00000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi
new file mode 100644
index 000000000000..3b7d01065e87
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi
@@ -0,0 +1,733 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ */
+
+#include <dt-bindings/clock/imx6qdl-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/media/video-interfaces.h>
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	aliases {
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc4;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 0>;
+		enable-active-high;
+	};
+
+	reg_can_xcvr: regulator-can-xcvr {
+		compatible = "regulator-fixed";
+		regulator-name = "CAN XCVR";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can_xcvr>;
+		gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_1p5v: regulator-1p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P5V";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_2p8v: regulator-2p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1>;
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	mipi_xclk: mipi_xclk {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <22000000>;
+		clock-output-names = "mipi_pwm3";
+		pwms = <&pwm3 0 45 0>; /* 1 / 45 ns = 22 MHz */
+		status = "okay";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-power {
+			label = "Power Button";
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		key-menu {
+			label = "Menu";
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+		};
+
+		key-home {
+			label = "Home";
+			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+		};
+
+		key-back {
+			label = "Back";
+			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6q-sabrelite-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6q-sabrelite-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+
+	backlight_lcd: backlight-lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	backlight_lvds: backlight-lvds {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	lcd_display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_j15>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel-lcd {
+		compatible = "okaya,rs800480t-7x0gp";
+		backlight = <&backlight_lcd>;
+		power-supply = <&reg_3p3v>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	panel-lvds0 {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds>;
+		power-supply = <&reg_3p3v>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&ipu1_csi0_from_ipu1_csi0_mux {
+	bus-width = <8>;
+	data-shift = <12>; /* Lines 19:12 used */
+	hsync-active = <1>;
+	vync-active = <1>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&ov5642_to_ipu1_csi0_mux>;
+};
+
+&ipu1_csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "sst,sst25vf016b", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy>;
+	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			txen-skew-ps = <0>;
+			txc-skew-ps = <3000>;
+			rxdv-skew-ps = <0>;
+			rxc-skew-ps = <3000>;
+			rxd0-skew-ps = <0>;
+			rxd1-skew-ps = <0>;
+			rxd2-skew-ps = <0>;
+			rxd3-skew-ps = <0>;
+			txd0-skew-ps = <0>;
+			txd1-skew-ps = <0>;
+			txd2-skew-ps = <0>;
+			txd3-skew-ps = <0>;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	ov5640: camera@40 {
+		compatible = "ovti,ov5640";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5640>;
+		reg = <0x40>;
+		clocks = <&mipi_xclk>;
+		clock-names = "xclk";
+		DOVDD-supply = <&reg_1p8v>;
+		AVDD-supply = <&reg_2p8v>;
+		DVDD-supply = <&reg_1p5v>;
+		reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* NANDF_D5 */
+		powerdown-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* NANDF_WP_B */
+
+		port {
+			ov5640_to_mipi_csi2: endpoint {
+				remote-endpoint = <&mipi_csi2_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+
+	ov5642: camera@42 {
+		compatible = "ovti,ov5642";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5642>;
+		clocks = <&clks IMX6QDL_CLK_CKO2>;
+		reg = <0x42>;
+		reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+		powerdown-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		gp-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+
+		port {
+			ov5642_to_ipu1_csi0_mux: endpoint {
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+				bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
+				bus-width = <8>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* SGTL5000 sys_mclk */
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x030b0
+		>;
+	};
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
+			MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
+			MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
+			MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_can_xcvr: can-xcvrgrp {
+		fsl,pins = <
+			/* Flexcan XCVR enable */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19  0x000b1	/* CS */
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			/* Phy reset */
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x000b0
+		>;
+	};
+
+	pinctrl_gpio_keys: gpio-keysgrp {
+		fsl,pins = <
+			/* Power Button */
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
+			/* Menu Button */
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+			/* Home Button */
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
+			/* Back Button */
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
+			/* Volume Up Button */
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
+			/* Volume Down Button */
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_16__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu1_csi0: ipu1csi0grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19    0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK   0x1b0b0
+			MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC      0x1b0b0
+			MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC     0x1b0b0
+			MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN 0x1b0b0
+		>;
+	};
+
+	pinctrl_j15: j15grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+		>;
+	};
+
+	pinctrl_ov5640: ov5640grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D5__GPIO2_IO05   0x000b0
+			MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x0b0b0
+		>;
+	};
+
+	pinctrl_ov5642: ov5642grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06   0x1b0b0
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08   0x130b0
+			MX6QDL_PAD_GPIO_3__CCM_CLKO2    0x000b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x030b0
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_KEY_COL4__USB_OTG_OC	0x1b0b0
+			/* power enable, high active */
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x000b0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0	/* CD */
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0	/* WP */
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+			MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0	/* CD */
+		>;
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&mipi_csi {
+	status = "okay";
+
+	port@0 {
+		reg = <0>;
+
+		mipi_csi2_in: endpoint {
+			remote-endpoint = <&ov5640_to_mipi_csi2>;
+			clock-lanes = <0>;
+			data-lanes = <1 2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi
new file mode 100644
index 000000000000..ba29720e3f72
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi
@@ -0,0 +1,856 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+#include <dt-bindings/clock/imx6qdl-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/media/video-interfaces.h>
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "reg-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&swbst_reg>;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&swbst_reg>;
+	};
+
+	reg_audio: regulator-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "wm8962-supply";
+		gpio = <&gpio4 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_pcie: regulator-pcie {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcie_reg>;
+		regulator-name = "MPCIE_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_sensors: regulator-sensors {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sensors_reg>;
+		regulator-name = "sensors-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-power {
+			label = "Power Button";
+			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+			linux,code = <KEY_POWER>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6q-sabresd-wm8962",
+			   "fsl,imx-audio-wm8962";
+		model = "wm8962-audio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hp>;
+		ssi-controller = <&ssi2>;
+		audio-codec = <&codec>;
+		audio-asrc = <&asrc>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Ext Spk", "SPKOUTL",
+			"Ext Spk", "SPKOUTR",
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC",
+			"DMIC", "MICBIAS",
+			"DMICDAT", "DMIC";
+		mux-int-port = <2>;
+		mux-ext-port = <3>;
+		hp-det-gpios = <&gpio7 8 GPIO_ACTIVE_LOW>;
+		mic-det-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+	};
+
+	backlight_lvds: backlight-lvds {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		status = "okay";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-red {
+			gpios = <&gpio1 2 0>;
+			default-state = "on";
+		};
+	};
+
+	panel {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&ipu1_csi0_from_ipu1_csi0_mux {
+	bus-width = <8>;
+	data-shift = <12>; /* Lines 19:12 used */
+	hsync-active = <1>;
+	vsync-active = <1>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&ov5642_to_ipu1_csi0_mux>;
+};
+
+&ipu1_csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
+};
+
+&mipi_csi {
+	status = "okay";
+
+	port@0 {
+		reg = <0>;
+
+		mipi_csi2_in: endpoint {
+			remote-endpoint = <&ov5640_to_mipi_csi2>;
+			clock-lanes = <0>;
+			data-lanes = <1 2>;
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p32", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: ethernet-phy@1 {
+			reg = <1>;
+			qca,clk-out-frequency = <125000000>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+		};
+	};
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi_cec>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: wm8962@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		DCVDD-supply = <&reg_audio>;
+		DBVDD-supply = <&reg_audio>;
+		AVDD-supply = <&reg_audio>;
+		CPVDD-supply = <&reg_audio>;
+		MICVDD-supply = <&reg_audio>;
+		PLLVDD-supply = <&reg_audio>;
+		SPKVDD1-supply = <&reg_audio>;
+		SPKVDD2-supply = <&reg_audio>;
+		gpio-cfg = <
+			0x0000 /* 0:Default */
+			0x0000 /* 1:Default */
+			0x0013 /* 2:FN_DMICCLK */
+			0x0000 /* 3:Default */
+			0x8014 /* 4:FN_DMICCDAT */
+			0x0000 /* 5:Default */
+		>;
+	};
+
+	accelerometer@1c {
+		compatible = "fsl,mma8451";
+		reg = <0x1c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c1_mma8451_int>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+		vdd-supply = <&reg_sensors>;
+		vddio-supply = <&reg_sensors>;
+	};
+
+	ov5642: camera@3c {
+		compatible = "ovti,ov5642";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5642>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		reg = <0x3c>;
+		DOVDD-supply = <&vgen4_reg>; /* 1.8v */
+		AVDD-supply = <&vgen3_reg>;  /* 2.8v, rev C board is VGEN3
+						rev B board is VGEN5 */
+		DVDD-supply = <&vgen2_reg>;  /* 1.5v*/
+		powerdown-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+		status = "disabled";
+
+		port {
+			ov5642_to_ipu1_csi0_mux: endpoint {
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+				bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
+				bus-width = <8>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	touchscreen@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c2_egalax_int>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-gpios = <&gpio6 8 GPIO_ACTIVE_LOW>;
+	};
+
+	ov5640: camera@3c {
+		compatible = "ovti,ov5640";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5640>;
+		reg = <0x3c>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		clock-names = "xclk";
+		DOVDD-supply = <&vgen4_reg>; /* 1.8v */
+		AVDD-supply = <&vgen3_reg>;  /* 2.8v, rev C board is VGEN3
+						rev B board is VGEN5 */
+		DVDD-supply = <&vgen2_reg>;  /* 1.5v*/
+		powerdown-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+
+		port {
+			ov5640_to_mipi_csi2: endpoint {
+				remote-endpoint = <&mipi_csi2_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	egalax_ts@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_LOW>;
+	};
+
+	magnetometer@e {
+		compatible = "fsl,mag3110";
+		reg = <0x0e>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3_mag3110_int>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <16 IRQ_TYPE_EDGE_RISING>;
+		vdd-supply = <&reg_sensors>;
+		vddio-supply = <&reg_sensors>;
+	};
+
+	light-sensor@44 {
+		compatible = "isil,isl29023";
+		reg = <0x44>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3_isl29023_int>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		vcc-supply = <&reg_sensors>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x130b0
+			MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
+		>;
+	};
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__ECSPI1_MISO	0x100b1
+			MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI	0x100b1
+			MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK	0x100b1
+			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09		0x1b0b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+		>;
+	};
+
+	pinctrl_gpio_keys: gpio_keysgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04  0x1b0b0
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05  0x1b0b0
+		>;
+	};
+
+	pinctrl_hdmi_cec: hdmicecgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE	0x1f8b0
+		>;
+	};
+
+	pinctrl_hp: hpgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08          0x1b0b0
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09           0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c1_mma8451_int: i2c1mma8451intgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__GPIO1_IO18		0xb0b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2_egalax_int: i2c2egalaxintgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3_isl29023_int: i2c3isl29023intgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0xb0b1
+		>;
+	};
+
+	pinctrl_i2c3_mag3110_int: i2c3mag3110intgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D16__GPIO3_IO16		0xb0b1
+		>;
+	};
+
+	pinctrl_ipu1_csi0: ipu1csi0grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19    0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK   0x1b0b0
+			MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC      0x1b0b0
+			MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC     0x1b0b0
+		>;
+	};
+
+	pinctrl_ov5640: ov5640grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x1b0b0
+			MX6QDL_PAD_SD1_CLK__GPIO1_IO20  0x1b0b0
+		>;
+	};
+
+	pinctrl_ov5642: ov5642grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0
+			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12	0x1b0b0
+		>;
+	};
+
+	pinctrl_pcie_reg: pciereggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19	0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_sensors_reg: sensorsreggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB3__GPIO2_IO31		0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			MX6QDL_PAD_NANDF_D4__SD2_DATA4		0x17059
+			MX6QDL_PAD_NANDF_D5__SD2_DATA5		0x17059
+			MX6QDL_PAD_NANDF_D6__SD2_DATA6		0x17059
+			MX6QDL_PAD_NANDF_D7__SD2_DATA7		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__WDOG2_B		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
+		>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@1 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&reg_arm {
+       vin-supply = <&sw1a_reg>;
+};
+
+&reg_pu {
+       vin-supply = <&sw1c_reg>;
+};
+
+&reg_soc {
+       vin-supply = <&sw1c_reg>;
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&vgen5_reg>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&vgen5_reg>;
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <8>;
+	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	status = "okay";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&wdog2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-savageboard.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-savageboard.dtsi
index 02e6d36e85fa..2daf2b6af884 100644
--- a/arch/arm/boot/dts/imx6qdl-savageboard.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-savageboard.dtsi
@@ -58,7 +58,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 
-		power {
+		key-power {
 			gpios = <&gpio3 7 GPIO_ACTIVE_LOW>;
 			label = "Power Button";
 			linux,code = <KEY_POWER>;
@@ -83,7 +83,7 @@
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <4>;
 		power-supply = <&reg_3p3v>;
-		pwms = <&pwm1 0 10000>;
+		pwms = <&pwm1 0 10000 0>;
 	};
 
 	reg_3p3v: regulator-3p3v {
@@ -140,7 +140,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu-revc.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu-revc.dtsi
new file mode 100644
index 000000000000..596b3bb3ddd1
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu-revc.dtsi
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2020 Pengutronix, Ulrich Oelmann <kernel@pengutronix.de>
+
+/ {
+	touchscreen {
+		compatible = "resistive-adc-touch";
+		io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>, <&adc_ts 5>;
+		io-channel-names = "y", "z1", "z2", "x";
+		touchscreen-min-pressure = <65000>;
+		touchscreen-inverted-y;
+		touchscreen-swapped-x-y;
+		touchscreen-x-plate-ohms = <300>;
+		touchscreen-y-plate-ohms = <800>;
+	};
+};
+
+&ecspi4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi4>;
+	cs-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	adc_ts: adc@0 {
+		compatible = "ti,tsc2046e-adc";
+		reg = <0>;
+		pinctrl-0 = <&pinctrl_touch>;
+		pinctrl-names = "default";
+		spi-max-frequency = <1000000>;
+		interrupts-extended = <&gpio3 19 IRQ_TYPE_LEVEL_LOW>;
+		#io-channel-cells = <1>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@1 {
+			reg = <1>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@3 {
+			reg = <3>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@4 {
+			reg = <4>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@5 {
+			reg = <5>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_ecspi4: ecspi4grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D28__ECSPI4_MOSI			0x100b1
+			MX6QDL_PAD_EIM_D22__ECSPI4_MISO			0x000b1
+			MX6QDL_PAD_EIM_D21__ECSPI4_SCLK			0x000b1
+			/* *no* external pull up */
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x40000058
+		>;
+	};
+
+	pinctrl_touch: touchgrp {
+		fsl,pins = <
+			/* external pull up */
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19			0x10040
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi
index 77a91a97e6cf..c93dbc595ef6 100644
--- a/arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi
@@ -13,10 +13,14 @@
 	aliases {
 		can0 = &can1;
 		can1 = &can2;
+		ethernet0 = &fec;
+		ethernet1 = &lan1;
+		ethernet2 = &lan2;
 		mdio-gpio0 = &mdio;
 		nand = &gpmi;
 		rtc0 = &i2c_rtc;
 		rtc1 = &snvs;
+		switch0 = &switch;
 		usb0 = &usbh1;
 		usb1 = &usbotg;
 	};
@@ -60,12 +64,12 @@
 		gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>,
 			<&gpio1 22 GPIO_ACTIVE_HIGH>;
 
-		switch@0 {
+		switch: switch@0 {
 			compatible = "microchip,ksz8873";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_switch>;
 			interrupt-parent = <&gpio3>;
-			interrupt = <30 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <30 IRQ_TYPE_LEVEL_HIGH>;
 			reset-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
 			reg = <0>;
 
@@ -73,13 +77,13 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				ports@0 {
+				lan1: ports@0 {
 					reg = <0>;
 					phy-mode = "internal";
 					label = "lan1";
 				};
 
-				ports@1 {
+				lan2: ports@1 {
 					reg = <1>;
 					phy-mode = "internal";
 					label = "lan2";
@@ -105,6 +109,7 @@
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
 	};
 
 	reg_3v3: regulator-3v3 {
@@ -149,6 +154,16 @@
 		gpio = <&gpio4 11 GPIO_ACTIVE_LOW>;
 	};
 
+	reg_tft_vcom: regulator-tft-vcom {
+		compatible = "pwm-regulator";
+		pwms = <&pwm3 0 20000 0>;
+		regulator-name = "tft_vcom";
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+		regulator-always-on;
+		voltage-table = <3600000 26>;
+	};
+
 	reg_vcc_mmc: regulator-vcc-mmc {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -222,13 +237,16 @@
 	};
 };
 
+&clks {
+	clocks = <&clk50m_phy>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clk50m_phy>;
+};
+
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	clocks = <&clks IMX6QDL_CLK_ENET>,
-		 <&clks IMX6QDL_CLK_ENET>,
-		 <&clk50m_phy>;
-	clock-names = "ipg", "ahb", "ptp";
 	phy-mode = "rmii";
 	phy-supply = <&reg_3v3>;
 	status = "okay";
@@ -264,7 +282,6 @@
 &pwm2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm2>;
-	#pwm-cells = <2>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-revc-lt2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-revc-lt2.dtsi
new file mode 100644
index 000000000000..48c9ce051f47
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-revc-lt2.dtsi
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2021 Pengutronix, Oleksij Rempel <kernel@pengutronix.de>
+
+/ {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		enable-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>;
+		pwms = <&pwm2 0 20000 0>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <17>;
+		default-brightness-level = <8>;
+		power-supply = <&reg_24v0>;
+	};
+
+	display {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1>;
+
+		port@0 {
+			reg = <0>;
+
+			display0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			display0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+
+	panel {
+		compatible = "logictechno,lttd800480070-l2rt";
+		backlight = <&backlight>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display0_out>;
+			};
+		};
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&iomuxc {
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_TD3__GPIO6_IO23		0x58
+		>;
+	};
+
+	pinctrl_ipu1: ipu1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-solidsense.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-solidsense.dtsi
new file mode 100644
index 000000000000..60e446ba8f52
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-solidsense.dtsi
@@ -0,0 +1,158 @@
+/*
+ * Copyright (C) 2021 Russell King <rmk@armlinux.org.uk>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/leds/common.h>
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_solidsense_leds>;
+
+		/* Red/Green LED1 - next to WiFi SMA */
+		led-11 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <0>;
+			gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+		};
+
+		led-12 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <0>;
+			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Red/Green LED2 - next to GPS SMA */
+		led-21 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <1>;
+			gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
+		};
+
+		led-22 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <1>;
+			gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&audio {
+	status = "disabled";
+};
+
+&ecspi2 {
+	status = "disabled";
+};
+
+&i2c3 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_hog>, <&pinctrl_solidsense_hog>;
+
+	pinctrl_solidsense_hog: solidsense-hoggrp {
+		fsl,pins = <
+			/* Nordic RESET_N */
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x400130b1
+			/* Nordic Chip 1 SWDIO - GPIO 125 */
+			MX6QDL_PAD_DISP0_DAT8__GPIO4_IO29 0x400130b1
+			/* Nordic Chip 1 SWDCLK - GPIO 59 */
+			/* already claimed in the HB2 hogs */
+			/* MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x400130b1 */
+			/* Nordic Chip 2 SWDIO - GPIO 81 */
+			MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x400130b1
+			/* Nordic Chip 2 SWCLK - GPIO 82 */
+			MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x400130b1
+		>;
+	};
+
+	pinctrl_solidsense_leds: solidsense-ledsgrp {
+		fsl,pins = <
+			/* Red LED 1 - GPIO 58 */
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x400130b1
+			/* Green LED 1 - GPIO 55 */
+			MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x400130b1
+			/* Red LED 2 - GPIO 57 */
+			MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x400130b1
+			/* Green LED 2 - GPIO 56 */
+			MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x400130b1
+		>;
+	};
+
+	pinctrl_solidsense_uart2: solidsense-uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_solidsense_uart3: solidsense-uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+};
+
+&pwm1 {
+	status = "disabled";
+};
+
+&sgtl5000 {
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_solidsense_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_solidsense_uart3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som-brcm.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som-brcm.dtsi
new file mode 100644
index 000000000000..e491f5c9d455
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som-brcm.dtsi
@@ -0,0 +1,142 @@
+/*
+ * Copyright (C) 2013,2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/gpio/gpio.h>
+/ {
+	clk_brcm: brcm-clock {
+		compatible = "gpio-gate-clock";
+		#clock-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_microsom_brcm_osc>;
+		enable-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_brcm: brcm-reg {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 19 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_microsom_brcm_reg>;
+		regulator-name = "brcm_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <200000>;
+	};
+
+	usdhc1_pwrseq: usdhc1_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>,
+			      <&gpio6 0 GPIO_ACTIVE_LOW>;
+		clocks = <&clk_brcm>;
+		clock-names = "ext_clock";
+	};
+};
+
+&iomuxc {
+	pinctrl_microsom_brcm_bt: microsom-brcm-btgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00	0x40013070
+			MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01	0x40013070
+			MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04	0x40013070
+		>;
+	};
+
+	pinctrl_microsom_brcm_osc: microsom-brcm-oscgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05	0x40013070
+		>;
+	};
+
+	pinctrl_microsom_brcm_reg: microsom-brcm-reggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x40013070
+		>;
+	};
+
+	pinctrl_microsom_brcm_wifi: microsom-brcm-wifigrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K	0x1b0b0
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x40013070
+			MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26	0x40013070
+			MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27	0x40013070
+		>;
+	};
+
+	pinctrl_microsom_uart4: microsom-uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
+		>;
+	};
+
+	pinctrl_microsom_usdhc1: microsom-usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+		>;
+	};
+};
+
+/* UART4 - Connected to optional BRCM Wifi/BT/FM */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_microsom_brcm_bt &pinctrl_microsom_uart4>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* USDHC1 - Connected to optional BRCM Wifi/BT/FM */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_microsom_brcm_wifi &pinctrl_microsom_usdhc1>;
+	bus-width = <4>;
+	mmc-pwrseq = <&usdhc1_pwrseq>;
+	keep-power-in-suspend;
+	no-1-8-v;
+	non-removable;
+	vmmc-supply = <&reg_brcm>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-sr-som-emmc.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som-emmc.dtsi
index 5f3b8baab20f..ddca24414d26 100644
--- a/arch/arm/boot/dts/imx6qdl-sr-som-emmc.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som-emmc.dtsi
@@ -40,22 +40,20 @@
  */
 
 &iomuxc {
-	microsom {
-		pinctrl_microsom_usdhc3: microsom-usdhc3 {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
-				MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
-				MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
-				MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
-				MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
-				MX6QDL_PAD_SD3_RST__SD3_RESET  0x17059
-			>;
-		};
+	pinctrl_microsom_usdhc3: microsom-usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+			MX6QDL_PAD_SD3_RST__SD3_RESET  0x17059
+		>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-sr-som-ti.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som-ti.dtsi
index 352ac585ca6b..cd1e682f11ad 100644
--- a/arch/arm/boot/dts/imx6qdl-sr-som-ti.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som-ti.dtsi
@@ -76,56 +76,54 @@
 };
 
 &iomuxc {
-	microsom {
-		pinctrl_microsom_ti_bt: microsom-ti-bt {
-			fsl,pins = <
-				/* BT_EN_SOC */
-				MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00	0x40013070
-			>;
-		};
+	pinctrl_microsom_ti_bt: microsom-ti-btgrp {
+		fsl,pins = <
+			/* BT_EN_SOC */
+			MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00	0x40013070
+		>;
+	};
 
-		pinctrl_microsom_ti_clk: microsom-ti-clk {
-			fsl,pins = <
-				/* EXT_32K */
-				MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K	0x1b0b0
-				/* WL_XTAL_PU (unrouted) */
-				MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x40013070
-			>;
-		};
+	pinctrl_microsom_ti_clk: microsom-ti-clkgrp {
+		fsl,pins = <
+			/* EXT_32K */
+			MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K	0x1b0b0
+			/* WL_XTAL_PU (unrouted) */
+			MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x40013070
+		>;
+	};
 
-		pinctrl_microsom_ti_wifi_en: microsom-ti-wifi-en {
-			fsl,pins = <
-				/* WLAN_EN_SOC */
-				MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26	0x40013070
-			>;
-		};
+	pinctrl_microsom_ti_wifi_en: microsom-ti-wifi-engrp {
+		fsl,pins = <
+			/* WLAN_EN_SOC */
+			MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26	0x40013070
+		>;
+	};
 
-		pinctrl_microsom_ti_wifi_irq: microsom-ti-wifi-irq {
-			fsl,pins = <
-				/* WLAN_IRQ */
-				MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04	0x40013070
-			>;
-		};
+	pinctrl_microsom_ti_wifi_irq: microsom-ti-wifi-irqgrp {
+		fsl,pins = <
+			/* WLAN_IRQ */
+			MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04	0x40013070
+		>;
+	};
 
-		pinctrl_microsom_uart4: microsom-uart4 {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
-				MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
-				MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
-				MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
-			>;
-		};
+	pinctrl_microsom_uart4: microsom-uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
+		>;
+	};
 
-		pinctrl_microsom_usdhc1: microsom-usdhc1 {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
-				MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
-				MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
-				MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
-				MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
-				MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
-			>;
-		};
+	pinctrl_microsom_usdhc1: microsom-usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+		>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som.dtsi
new file mode 100644
index 000000000000..7af74b203e39
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som.dtsi
@@ -0,0 +1,156 @@
+/*
+ * Copyright (C) 2013,2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-name = "vcc_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_microsom_enet_ar8035>;
+	phy-mode = "rgmii-id";
+
+	/*
+	 * The PHY seems to require a long-enough reset duration to avoid
+	 * some rare issues where the PHY gets stuck in an inconsistent and
+	 * non-functional state at boot-up. 10ms proved to be fine .
+	 */
+	phy-reset-duration = <10>;
+	phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/*
+		 * The PHY can appear at either address 0 or 4 due to the
+		 * configuration (LED) pin not being pulled sufficiently.
+		 */
+		ethernet-phy@0 {
+			reg = <0>;
+			qca,clk-out-frequency = <125000000>;
+			qca,smarteee-tw-us-1g = <24>;
+		};
+
+		ethernet-phy@4 {
+			reg = <4>;
+			qca,clk-out-frequency = <125000000>;
+			qca,smarteee-tw-us-1g = <24>;
+		};
+
+		/*
+		 * ADIN1300 (som rev 1.9 or later) is always at address 1. It
+		 * will be enabled automatically by U-Boot if detected.
+		 */
+		ethernet-phy@1 {
+			reg = <1>;
+			adi,phy-output-clock = "125mhz-free-running";
+			status = "disabled";
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_microsom_enet_ar8035: microsom-enet-ar8035grp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b8b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			/* AR8035 reset */
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x130b0
+			/* AR8035 interrupt */
+			MX6QDL_PAD_DI0_PIN2__GPIO4_IO18		0x1b0b0
+			/* GPIO16 -> AR8035 25MHz */
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x13030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x0a0b1
+			/* AR8035 pin strapping: IO voltage: pull up */
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			/* AR8035 pin strapping: PHYADDR#0: pull down */
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030
+			/* AR8035 pin strapping: PHYADDR#1: pull down */
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030
+			/* AR8035 pin strapping: MODE#1: pull up */
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			/* AR8035 pin strapping: MODE#3: pull up */
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			/* AR8035 pin strapping: MODE#0: pull down */
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x13030
+
+			/*
+			 * As the RMII pins are also connected to RGMII
+			 * so that an AR8030 can be placed, set these
+			 * to high-z with the same pulls as above.
+			 * Use the GPIO settings to avoid changing the
+			 * input select registers.
+			 */
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x03000
+			MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x03000
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x03000
+		>;
+	};
+
+	pinctrl_microsom_uart1: microsom-uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_microsom_uart1>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-tqma6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6.dtsi
index b18b83ac6aee..07492f63a1f8 100644
--- a/arch/arm/boot/dts/imx6qdl-tqma6.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6.dtsi
@@ -7,29 +7,24 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
-/ {
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "supply-3p3v";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-};
-
 &ecspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
 	m25p80: flash@0 {
 		compatible = "jedec,spi-nor";
-		spi-max-frequency = <50000000>;
 		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		vcc-supply = <&sw4_reg>;
 		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
 	};
 };
 
@@ -52,10 +47,10 @@
 		>;
 	};
 
-	pinctrl_i2c3: i2c3grp {
+	pinctrl_i2c1_recovery: i2c1recoverygrp {
 		fsl,pins = <
-			MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b899
-			MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b899
+			MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x4001b899
+			MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x4001b899
 		>;
 	};
 
@@ -119,7 +114,7 @@
 		};
 
 		sw4_reg: sw4 {
-			regulator-min-microvolt = <800000>;
+			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			regulator-always-on;
 		};
@@ -183,7 +178,7 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	vmmc-supply = <&reg_3p3v>;
+	vmmc-supply = <&sw4_reg>;
 	non-removable;
 	disable-wp;
 	no-sd;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6a.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6a.dtsi
new file mode 100644
index 000000000000..e8fd37dd8835
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6a.dtsi
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+&fec {
+	/delete-property/ interrupts;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+};
+
+&i2c1 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_recovery>;
+	scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+	};
+
+	temperature-sensor@48 {
+		compatible = "national,lm75a";
+		reg = <0x48>;
+		vs-supply = <&sw4_reg>;
+	};
+
+	eeprom@50 {
+		compatible = "st,24c64", "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		vcc-supply = <&sw4_reg>;
+	};
+};
+
+&iomuxc {
+	/*
+	 * This pinmuxing is required for the ERR006687 workaround. Board
+	 * DTS files that enable the FEC controller with
+	 * fsl,err006687-workaround-present must include this group.
+	 */
+	pinctrl_enet_fix: enetfixgrp {
+		fsl,pins = <
+			/* ENET ping patch */
+			MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6b.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6b.dtsi
new file mode 100644
index 000000000000..0e404c1f62f2
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6b.dtsi
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+&i2c3 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_recovery>;
+	scl-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+	};
+
+	temperature-sensor@48 {
+		compatible = "national,lm75a";
+		reg = <0x48>;
+		vs-supply = <&sw4_reg>;
+	};
+
+	eeprom@50 {
+		compatible = "st,24c64", "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		vcc-supply = <&sw4_reg>;
+	};
+};
+
+&iomuxc {
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b899
+			MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b899
+		>;
+	};
+
+	pinctrl_i2c3_recovery: i2c3recoverygrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x4001b899
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b899
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-ts4900.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-ts4900.dtsi
index f88da757edda..948b612496a5 100644
--- a/arch/arm/boot/dts/imx6qdl-ts4900.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-ts4900.dtsi
@@ -140,7 +140,7 @@
 		reg = <0x28>;
 		#gpio-cells = <2>;
 		gpio-controller;
-		ngpio = <32>;
+		ngpios = <32>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-ts7970.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-ts7970.dtsi
index fded07f370b3..17f6a568f0e8 100644
--- a/arch/arm/boot/dts/imx6qdl-ts7970.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-ts7970.dtsi
@@ -73,13 +73,13 @@
 			default-state = "off";
 		};
 
-		en-usb-5v {
+		en-usb-5v-led {
 			label = "en-usb-5v";
 			gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 
-		sel_dc_usb {
+		sel-dc-usb-led {
 			label = "sel_dc_usb";
 			gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
@@ -192,6 +192,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
@@ -212,12 +213,12 @@
 	status = "okay";
 
 	m41t00s: rtc@68 {
-		compatible = "m41t00";
+		compatible = "st,m41t00";
 		reg = <0x68>;
 	};
 
 	isl12022: rtc@6f {
-		compatible = "isl,isl12022";
+		compatible = "isil,isl12022";
 		reg = <0x6f>;
 	};
 
@@ -226,7 +227,7 @@
 		reg = <0x28>;
 		#gpio-cells = <2>;
 		gpio-controller;
-		ngpio = <32>;
+		ngpios = <62>;
 	};
 
 	sgtl5000: codec@a {
@@ -234,6 +235,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_sgtl5000>;
 		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&reg_3p3v>;
 		VDDIO-supply = <&reg_3p3v>;
@@ -263,7 +265,7 @@
 		>;
 	};
 
-	pinctrl_ecspi2: ecspi2 {
+	pinctrl_ecspi2: ecspi2grp {
 		fsl,pins = <
 			MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK      0x100b1
 			MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI      0x100b1
@@ -278,7 +280,7 @@
 		>;
 	};
 
-	pinctrl_enet: enet {
+	pinctrl_enet: enetgrp {
 		fsl,pins = <
 			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lcd.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lcd.dtsi
new file mode 100644
index 000000000000..cdeaca36867e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lcd.dtsi
@@ -0,0 +1,209 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/ {
+	aliases {
+		display = &display;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd1_pwr>;
+		enable-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_3v3>;
+		/*
+		 * a poor man's way to create a 1:1 relationship between
+		 * the PWM value and the actual duty cycle
+		 */
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+
+	lcd_panel: lcd-panel {
+		compatible = "edt,etm0700g0dh6";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd0_pwr>;
+		enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_3v3>;
+		backlight = <&backlight>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_out>;
+			};
+		};
+	};
+
+	display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_disp0_1>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+
+		display-timings {
+			timing-vga {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <48>;
+				hsync-len = <96>;
+				hfront-porch = <16>;
+				vback-porch = <31>;
+				vsync-len = <2>;
+				vfront-porch = <12>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			timing-etv570 {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <114>;
+				hsync-len = <30>;
+				hfront-porch = <16>;
+				vback-porch = <32>;
+				vsync-len = <3>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			timing-et0350 {
+				clock-frequency = <6413760>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <34>;
+				hsync-len = <34>;
+				hfront-porch = <20>;
+				vback-porch = <15>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			timing-et0430 {
+				clock-frequency = <9009000>;
+				hactive = <480>;
+				vactive = <272>;
+				hback-porch = <2>;
+				hsync-len = <41>;
+				hfront-porch = <2>;
+				vback-porch = <2>;
+				vsync-len = <10>;
+				vfront-porch = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			timing-et0500 {
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			timing-et0700 { /* same as ET0500 */
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			timing-etq570 {
+				clock-frequency = <6596040>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <38>;
+				hsync-len = <30>;
+				hfront-porch = <30>;
+				vback-porch = <16>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			timing-comtft { /* same as ET0700 but with inverted pixel clock */
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_in>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lvds.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lvds.dtsi
new file mode 100644
index 000000000000..63d09c01a3c6
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lvds.dtsi
@@ -0,0 +1,246 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/ {
+	aliases {
+		display = &lvds0;
+		lvds0 = &lvds0;
+		lvds1 = &lvds1;
+	};
+
+	backlight0: backlight0 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 0>;
+		power-supply = <&reg_lcd0_pwr>;
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+
+	backlight1: backlight1 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 500000 0>;
+		power-supply = <&reg_lcd1_pwr>;
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+
+	lvds0_panel: lvds0-panel {
+		compatible = "nlt,nl12880bc20-spwg-24";
+		backlight = <&backlight0>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	lvds1_panel: lvds1-panel {
+		compatible = "nlt,nl12880bc20-spwg-24";
+		backlight = <&backlight1>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in_lvds1: endpoint {
+				remote-endpoint = <&lvds1_out>;
+			};
+		};
+	};
+};
+
+&kpp {
+	status = "disabled"; /* pad conflict with backlight1 PWM */
+};
+
+&ldb {
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		fsl,data-width = <18>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+
+		display-timings {
+			timing-hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			timing-vga {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <48>;
+				hfront-porch = <16>;
+				vback-porch = <31>;
+				vfront-porch = <12>;
+				hsync-len = <96>;
+				vsync-len = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			timing-nl12880bc20 {
+				clock-frequency = <71000000>;
+				hactive = <1280>;
+				vactive = <800>;
+				hback-porch = <50>;
+				hfront-porch = <50>;
+				vback-porch = <5>;
+				vfront-porch = <5>;
+				hsync-len = <60>;
+				vsync-len = <13>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			timing-et0700 {
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			timing-etv570 {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <114>;
+				hsync-len = <30>;
+				hfront-porch = <16>;
+				vback-porch = <32>;
+				vsync-len = <3>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+
+	lvds1: lvds-channel@1 {
+		fsl,data-width = <18>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds1_out: endpoint {
+				remote-endpoint = <&panel_in_lvds1>;
+			};
+		};
+
+		display-timings {
+			timing-hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			timing-vga {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <48>;
+				hfront-porch = <16>;
+				vback-porch = <31>;
+				vfront-porch = <12>;
+				hsync-len = <96>;
+				vsync-len = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			timing-nl12880bc20 {
+				clock-frequency = <71000000>;
+				hactive = <1280>;
+				vactive = <800>;
+				hback-porch = <50>;
+				hfront-porch = <50>;
+				vback-porch = <5>;
+				vfront-porch = <5>;
+				hsync-len = <60>;
+				vsync-len = <13>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&reg_lcd0_pwr {
+	status = "okay";
+};
+
+&reg_lcd1_pwr {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-mb7.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-mb7.dtsi
new file mode 100644
index 000000000000..8232f4ea2752
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-mb7.dtsi
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/ {
+	backlight0 {
+		pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>;
+		power-supply = <&reg_lcd1_pwr>;
+	};
+
+	backlight1 {
+		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
+		power-supply = <&reg_lcd1_pwr>;
+	};
+
+	lcd-panel {
+		compatible = "edt,et057090dhu";
+		power-supply = <&reg_lcd1_pwr>;
+		pixelclk-active = <0>;
+	};
+
+	lvds0-panel {
+		compatible = "edt,etml1010g0dka";
+		power-supply = <&reg_lcd1_pwr>;
+		pixelclk-active = <0>;
+	};
+
+	lvds1-panel {
+		compatible = "edt,etml1010g0dka";
+		power-supply = <&reg_lcd1_pwr>;
+		pixelclk-active = <0>;
+	};
+};
+
+&can1 {
+	status = "disabled";
+};
+
+&can2 {
+	xceiver-supply = <&reg_3v3>;
+};
+
+&ds1339 {
+	/*
+	 * The backup voltage of the module internal RTC is not wired
+	 * by default on the MB7, so disable that RTC chip.
+	 */
+	status = "disabled";
+};
+
+&i2c3 {
+	rtc: rtc@6f {
+		compatible = "microchip,mcp7940x";
+		reg = <0x6f>;
+	};
+};
+
+&reg_lcd0_pwr {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi
index 362e65ccaa78..57297d6521cf 100644
--- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/gpio/gpio.h>
@@ -70,9 +34,8 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		mclk: clock@0 {
+		mclk: clock {
 			compatible = "fixed-clock";
-			reg = <0>;
 			#clock-cells = <0>;
 			clock-frequency = <26000000>;
 		};
@@ -81,7 +44,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_POWER>;
@@ -92,7 +55,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		user_led: user {
+		user_led: led-user {
 			label = "Heartbeat";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_user_led>;
@@ -216,7 +179,7 @@
 &audmux {
 	status = "okay";
 
-	ssi1 {
+	mux-ssi1 {
 		fsl,audmux-port = <0>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_SYN |
@@ -228,7 +191,7 @@
 		>;
 	};
 
-	pins5 {
+	mux-pins5 {
 		fsl,audmux-port = <4>;
 		fsl,port-config = <
 			IMX_AUDMUX_V2_PTCR_SYN
@@ -259,28 +222,11 @@
 		&gpio3 19 GPIO_ACTIVE_HIGH
 	>;
 	status = "disabled";
-
-	spidev0: spi@0 {
-		compatible = "spidev";
-		reg = <0>;
-		spi-max-frequency = <54000000>;
-	};
-
-	spidev1: spi@1 {
-		compatible = "spidev";
-		reg = <1>;
-		spi-max-frequency = <54000000>;
-	};
 };
 
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet &pinctrl_enet_mdio &pinctrl_etnphy_rst>;
-	clocks = <&clks IMX6QDL_CLK_ENET>,
-		 <&clks IMX6QDL_CLK_ENET>,
-		 <&clks IMX6QDL_CLK_ENET_REF>,
-		 <&clks IMX6QDL_CLK_ENET_REF>;
-	clock-names = "ipg", "ahb", "ptp", "enet_out";
 	phy-mode = "rmii";
 	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
 	phy-reset-post-delay = <10>;
@@ -390,7 +336,7 @@
 		>;
 	};
 
-	pinctrl_disp0_1: disp0grp-1 {
+	pinctrl_disp0_1: disp0-1-grp {
 		fsl,pins = <
 			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
 			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
@@ -423,7 +369,7 @@
 		>;
 	};
 
-	pinctrl_disp0_2: disp0grp-2 {
+	pinctrl_disp0_2: disp0-2-grp {
 		fsl,pins = <
 			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
 			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-udoo.dtsi
new file mode 100644
index 000000000000..2be7dc4a9781
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-udoo.dtsi
@@ -0,0 +1,316 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		backlight = &backlight;
+		panelchan = &panelchan;
+		panel7 = &panel7;
+		touchscreenp7 = &touchscreenp7;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	backlight: backlight {
+		compatible = "gpio-backlight";
+		gpios = <&gpio1 4 0>;
+		default-on;
+		status = "disabled";
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio2 4 0>;
+		pinctrl-0 = <&pinctrl_power_off>;
+		pinctrl-names = "default";
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	panel7: panel7 {
+		/*
+		 * in reality it is a -20t (parallel) model,
+		 * but with LVDS bridge chip attached,
+		 * so it is equivalent to -19t model in drive
+		 * characteristics
+		 */
+		compatible = "urt,umsh-8596md-19t";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_panel>;
+		power-supply = <&reg_panel>;
+		backlight = <&backlight>;
+		status = "disabled";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	reg_panel: regulator-panel {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd_panel";
+		enable-active-high;
+		gpio = <&gpio1 2 0>;
+	};
+
+	sound {
+		compatible = "fsl,imx6q-udoo-ac97",
+			     "fsl,imx-audio-ac97";
+		model = "fsl,imx6q-udoo-ac97";
+		audio-cpu = <&ssi1>;
+		audio-routing =
+			"RX", "Mic Jack",
+			"Headphone Jack", "TX";
+		mux-int-port = <1>;
+		mux-ext-port = <6>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	touchscreenp7: touchscreenp7@55 {
+		compatible = "sitronix,st1232";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchscreenp7>;
+		reg = <0x55>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <13 8>;
+		gpios = <&gpio1 15 0>;
+		status = "disabled";
+	};
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001f8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001f8b1
+		>;
+	};
+
+	pinctrl_panel: panelgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x70
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x70
+		>;
+	};
+
+	pinctrl_power_off: poweroffgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x30
+		>;
+	};
+
+	pinctrl_touchscreenp7: touchscreenp7grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_DAT0__GPIO1_IO15		0x70
+			MX6QDL_PAD_SD2_DAT2__GPIO1_IO13		0x1b0b0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh: usbhgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000
+			MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+			MX6QDL_PAD_EIM_D22__USB_OTG_PWR 0x17059
+			MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
+		>;
+	};
+
+	pinctrl_ac97_running: ac97runninggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_PIN2__AUD6_TXD		0x1b0b0
+			MX6QDL_PAD_DI0_PIN3__AUD6_TXFS		0x1b0b0
+			MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x13080
+			MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x13080
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
+		>;
+	};
+
+	pinctrl_ac97_warm_reset: ac97warmresetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_PIN2__AUD6_TXD		0x1b0b0
+			MX6QDL_PAD_DI0_PIN3__GPIO4_IO19		0x1b0b0
+			MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x13080
+			MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x13080
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
+		>;
+	};
+
+	pinctrl_ac97_reset: ac97resetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_PIN2__GPIO4_IO18		0x1b0b0
+			MX6QDL_PAD_DI0_PIN3__GPIO4_IO19		0x1b0b0
+			MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x13080
+			MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x13080
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
+		>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	panelchan: lvds-channel@0 {
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	usb-port@1 {
+		compatible = "usb424,2514";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&audmux {
+	status = "okay";
+};
+
+&ssi1 {
+	cell-index = <0>;
+	fsl,mode = "ac97-slave";
+	pinctrl-names = "ac97-running", "ac97-reset", "ac97-warm-reset";
+	pinctrl-0 = <&pinctrl_ac97_running>;
+	pinctrl-1 = <&pinctrl_ac97_reset>;
+	pinctrl-2 = <&pinctrl_ac97_warm_reset>;
+	ac97-gpios = <&gpio4 19 0 &gpio4 18 0 &gpio2 30 0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-var-dart.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-var-dart.dtsi
index c41cac502bac..7749074e438d 100644
--- a/arch/arm/boot/dts/imx6qdl-var-dart.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-var-dart.dtsi
@@ -39,7 +39,7 @@
 	pinctrl-0 = <&pinctrl_audmux>;
 	status = "okay";
 
-	ssi2 {
+	mux-ssi2 {
 		fsl,audmux-port = <1>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_SYN |
@@ -51,7 +51,7 @@
 		>;
 	};
 
-	aud3 {
+	mux-aud3 {
 		fsl,audmux-port = <2>;
 		fsl,port-config = <
 			IMX_AUDMUX_V2_PTCR_SYN
@@ -194,7 +194,7 @@
 };
 
 &iomuxc {
-	pinctrl_audmux: audmux {
+	pinctrl_audmux: audmuxgrp {
 		fsl,pins = <
 			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
 			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
@@ -205,7 +205,7 @@
 		>;
 	};
 
-	pinctrl_bt: bt {
+	pinctrl_bt: btgrp {
 		fsl,pins = <
 			/* Bluetooth enable */
 			MX6QDL_PAD_SD3_DAT6__GPIO6_IO18		0x1b0b1
@@ -346,7 +346,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+	pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x170B9
 			MX6QDL_PAD_SD1_CLK__SD1_CLK	0x100B9
@@ -357,7 +357,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x170F9
 			MX6QDL_PAD_SD1_CLK__SD1_CLK	0x100F9
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi
new file mode 100644
index 000000000000..fef34ce961d5
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi
@@ -0,0 +1,566 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Support for Variscite VAR-SOM-MX6 Module
+ *
+ * Copyright 2011 Linaro Ltd.
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright (C) 2014-2016 Variscite, Ltd.
+ * Author: Donio Ron <ron.d@variscite.com>
+ * Copyright 2022 Bootlin
+ */
+
+#include <dt-bindings/clock/imx6qdl-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	model = "Variscite VAR-SOM-MX6 module";
+	compatible = "variscite,var-som-imx6q", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbud {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_wl18xx_vmmc: regulator-wl18xx {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1807";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <70000>;
+	};
+
+	sound: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "var-som-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_codec>;
+		simple-audio-card,frame-master = <&sound_codec>;
+		simple-audio-card,widgets = "Headphone", "Headphone Jack",
+					    "Line", "Line In", "Microphone", "Mic Jack";
+		simple-audio-card,routing = "Headphone Jack", "HPLOUT",
+					    "Headphone Jack", "HPROUT",
+					    "LINE1L", "Line In",
+					    "LINE1R", "Line In";
+
+		sound_cpu: simple-audio-card,cpu {
+			sound-dai = <&ssi2>;
+		};
+
+		sound_codec: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			clocks = <&clks IMX6QDL_CLK_CKO>;
+		};
+	};
+
+	rfkill {
+		compatible = "rfkill-gpio";
+		name = "rfkill";
+		radio-type = "bluetooth";
+		shutdown-gpios = <&gpio6 18 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+
+	mux-ssi2 {
+		fsl,audmux-port = <1>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_SYN |
+			IMX_AUDMUX_V2_PTCR_TFSDIR |
+			IMX_AUDMUX_V2_PTCR_TFSEL(2) |
+			IMX_AUDMUX_V2_PTCR_TCLKDIR |
+			IMX_AUDMUX_V2_PTCR_TCSEL(2))
+			IMX_AUDMUX_V2_PDCR_RXDSEL(2)
+		>;
+	};
+
+	mux-aud3 {
+		fsl,audmux-port = <2>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(1)
+		>;
+	};
+};
+
+&ecspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-handle = <&rgmii_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rgmii_phy: ethernet-phy@7 {
+			reg = <7>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+		};
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+
+	tlv320aic3106: audio-codec@1b {
+		compatible = "ti,tlv320aic3106";
+		reg = <0x1b>;
+		#sound-dai-cells = <0>;
+		DRVDD-supply = <&reg_3p3v>;
+		AVDD-supply = <&reg_3p3v>;
+		IOVDD-supply = <&reg_3p3v>;
+		DVDD-supply = <&reg_1p8v>;
+		ai3x-ocmv = <0>;
+		reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
+		ai3x-gpio-func = <
+			0 /* AIC3X_GPIO1_FUNC_DISABLED */
+			5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
+		>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			/* Audio Clock */
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0
+		>;
+	};
+
+	pinctrl_bt: btgrp {
+		fsl,pins = <
+			/* Bluetooth/wifi enable */
+			MX6QDL_PAD_SD3_DAT6__GPIO6_IO18		0x1b0b1
+			/* Wifi Slow Clock */
+			MX6QDL_PAD_ENET_RXD0__OSC32K_32K_OUT	0x000b0
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+		>;
+	};
+
+	pinctrl_enet_irq: enetirqgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_6__ENET_IRQ	0x000b1
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* CTW6120 IRQ */
+			MX6QDL_PAD_EIM_DA7__GPIO3_IO07		0xb0b1
+			/* SDMMC2 CD/WP */
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA	0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL	0x4001b8b1
+			MX6QDL_PAD_GPIO_16__I2C3_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			/* PMIC INT */
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12	0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT9__PWM2_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D28__UART2_CTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D29__UART2_RTS_B		0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17069
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10069
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17069
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17069
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17069
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17069
+			/* WL_EN */
+			MX6QDL_PAD_SD3_DAT7__GPIO6_IO17 0x13059
+			/* WL_IRQ */
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08  0x13059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x170B9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x100B9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x170B9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x170B9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x170B9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x170B9
+			/* WL_EN */
+			MX6QDL_PAD_SD3_DAT7__GPIO6_IO17 0x130B9
+			/* WL_IRQ */
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08  0x130B9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x170F9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x100F9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x170F9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x170F9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x170F9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x170F9
+			/* WL_EN */
+			MX6QDL_PAD_SD3_DAT7__GPIO6_IO17 0x130F9
+			/* WL_IRQ */
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08  0x130F9
+		>;
+	};
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&reg_arm {
+	vin-supply = <&sw1a_reg>;
+};
+
+&reg_pu {
+	vin-supply = <&sw1c_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&sw1c_reg>;
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&vgen5_reg>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&vgen5_reg>;
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2 &pinctrl_bt>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg_var>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usbphy2 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	non-removable;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_wl18xx_vmmc>;
+	non-removable;
+	wakeup-source;
+	keep-power-in-suspend;
+	cap-power-off-card;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wifi: wifi@2 {
+		compatible = "ti,wl1835";
+		reg = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <17 IRQ_TYPE_EDGE_RISING>;
+		ref-clock-frequency = <38400000>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-vicut1-12inch.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-vicut1-12inch.dtsi
new file mode 100644
index 000000000000..73f381e14467
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-vicut1-12inch.dtsi
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2021 Protonic Holland
+ */
+
+/ {
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiokeys>;
+		autorepeat;
+
+		power-button {
+			label = "Power Button";
+			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	panel {
+		compatible = "kyo,tcg121xglp";
+		backlight = <&backlight_lcd>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&rgmii_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Microchip KSZ9031RNX PHY */
+		rgmii_phy: ethernet-phy@0 {
+			reg = <0>;
+			interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <300>;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR",
+			"CAM2_MIRROR", "", "", "SMBALERT",
+		"DEBUG_0", "DEBUG_1", "", "", "", "", "", "",
+		"SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK",
+			"SD1_DATA3", "ETH_MDIO", "",
+		"", "ETH_RESET", "", "", "ETH_INT", "", "", "ETH_MDC";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "", "", "", "UART4_TXD", "UART4_RXD",
+		"UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR",
+			"CAN2_SR", "CAN2_TX", "CAN2_RX",
+		"", "", "DIP1_FB", "", "VCAM_EN", "ON1_CTRL", "ON2_CTRL",
+			"HITCH_IN_OUT",
+		"LIGHT_ON", "", "", "CONTACT_IN", "BL_EN", "BL_PWM", "",
+			"ISB_LED";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET",
+			"I2S_BITCLK", "I2S_DOUT",
+		"I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX",
+			"YACO_AUX_TX", "ITU656_D0", "ITU656_D1";
+};
+
+&gpio6 {
+	gpio-line-names =
+		"ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5",
+			"ITU656_D6", "ITU656_D7", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "RGMII_TXC", "RGMII_TD0", "RGMII_TD1", "RGMII_TD2",
+			"RGMII_TD3",
+		"RGMII_RX_CTL", "RGMII_RD0", "RGMII_TX_CTL", "RGMII_RD1",
+			"RGMII_RD2", "RGMII_RD3", "", "";
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC			0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0			0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1			0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2			0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3			0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL		0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC			0x10030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0			0x10030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1			0x10030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2			0x10030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3			0x10030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL		0x10030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK		0x10030
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO			0x10030
+			MX6QDL_PAD_ENET_MDC__ENET_MDC			0x10030
+			/* Phy reset */
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25		0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28		0x1b0b1
+		>;
+	};
+
+	pinctrl_gpiokeys: gpiokeygrp {
+		fsl,pins = <
+			/* nON_SWITCH */
+			MX6QDL_PAD_EIM_CS0__GPIO2_IO23			0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-vicut1.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-vicut1.dtsi
new file mode 100644
index 000000000000..de2b12dad7d8
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-vicut1.dtsi
@@ -0,0 +1,711 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2014 Protonic Holland
+ * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
+ */
+
+#include <dt-bindings/display/sdtv-standards.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/media/tvp5150.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	backlight_lcd: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		pwms = <&pwm1 0 5000000 0>;
+		brightness-levels = <0 16 64 255>;
+		num-interpolated-steps = <16>;
+		default-brightness-level = <48>;
+		power-supply = <&reg_3v3>;
+		enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+	};
+
+	backlight_led: backlight-led {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 5000000 0>;
+		brightness-levels = <0 16 64 255>;
+		num-interpolated-steps = <16>;
+		default-brightness-level = <48>;
+		power-supply = <&reg_3v3>;
+	};
+
+	/* only for backwards compatibility with old HW */
+	backlight_isb: backlight-isb {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 5000000 0>;
+		brightness-levels = <0 8 48 255>;
+		num-interpolated-steps = <5>;
+		default-brightness-level = <0>;
+		power-supply = <&reg_3v3>;
+	};
+
+	connector {
+		compatible = "composite-video-connector";
+		label = "Composite0";
+		sdtv-standards = <SDTV_STD_PAL_B>;
+
+		port {
+			comp0_out: endpoint {
+				remote-endpoint = <&tvp5150_comp0_in>;
+			};
+		};
+	};
+
+	counter-0 {
+		compatible = "interrupt-counter";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_counter0>;
+		gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	};
+
+	counter-1 {
+		compatible = "interrupt-counter";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_counter1>;
+		gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+	};
+
+	counter-2 {
+		compatible = "interrupt-counter";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_counter2>;
+		gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-0 {
+			label = "debug0";
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "debug1";
+			function = LED_FUNCTION_DISK;
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "disk-activity";
+		};
+
+		led-2 {
+			label = "power_led";
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led-3 {
+			label = "isb_led";
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_otg_vbus: regulator-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "otg-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "prti6q-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Line", "Line In Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "External Speaker";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"External Speaker", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+			system-clock-frequency = <0>; /* Do NOT call fsl_ssi_set_dai_sysclk! */
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&codec>;
+			bitclock-master;
+			frame-master;
+		};
+	};
+
+	thermal-zones {
+		chassis-thermal {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&tsens0>;
+
+			trips {
+				alert {
+					temperature = <105000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+
+	mux-ssi1 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN		0
+			IMX_AUDMUX_V2_PTCR_TFSEL(2)	0
+			IMX_AUDMUX_V2_PTCR_TCSEL(2)	0
+			IMX_AUDMUX_V2_PTCR_TFSDIR	0
+			IMX_AUDMUX_V2_PTCR_TCLKDIR	IMX_AUDMUX_V2_PDCR_RXDSEL(2)
+		>;
+	};
+
+	mux-pins3 {
+		fsl,audmux-port = <2>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN		IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+			0				IMX_AUDMUX_V2_PDCR_TXRXEN
+		>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	termination-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	termination-ohms = <150>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&gpio2 {
+	gpio-line-names =
+		"YACO_WHEEL", "YACO_RADAR", "YACO_PTO", "", "", "", "", "",
+		"", "LED_PWM", "", "", "",
+			"", "", "",
+		"", "", "", "", "", "ISB_IN2", "ISB_nIN1", "ON_SWITCH",
+		"POWER_LED", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"ECSPI1_SCLK", "ECSPI1_MISO", "ECSPI1_MOSI", "ECSPI1_SS1",
+			"CPU_ON1_FB", "USB_OTG_OC", "USB_OTG_PWR", "YACO_IRQ",
+		"TSS_TXD", "TSS_RXD", "", "", "", "", "YACO_BOOT0",
+			"YACO_RESET";
+};
+
+&gpio7 {
+	gpio-line-names =
+		"EMMC_DAT5", "EMMC_DAT4", "EMMC_CMD", "EMMC_CLK", "EMMC_DAT0",
+			"EMMC_DAT1", "EMMC_DAT2", "EMMC_DAT3",
+		"EMMC_RST", "", "", "", "CAM_DETECT", "", "", "",
+		"", "EMMC_DAT7", "EMMC_DAT6", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0xa>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&reg_3v3>;
+		VDDIO-supply = <&reg_3v3>;
+		VDDD-supply = <&reg_1v8>;
+	};
+
+	video-decoder@5c {
+		compatible = "ti,tvp5150";
+		reg = <0x5c>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			tvp5150_comp0_in: endpoint {
+				remote-endpoint = <&comp0_out>;
+			};
+		};
+
+		/* Output port 2 is video output pad */
+		port@2 {
+			reg = <2>;
+
+			tvp5151_to_ipu1_csi0_mux: endpoint {
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	adc@49 {
+		compatible = "ti,ads1015";
+		reg = <0x49>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@4 {
+			reg = <4>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		channel@5 {
+			reg = <5>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		channel@6 {
+			reg = <6>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		channel@7 {
+			reg = <7>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	tsens0: temperature-sensor@70 {
+		compatible = "ti,tmp103";
+		reg = <0x70>;
+		#thermal-sensor-cells = <0>;
+	};
+};
+
+&ipu1_csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
+	status = "okay";
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&tvp5151_to_ipu1_csi0_mux>;
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbh1 {
+	phy_type = "utmi";
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	phy_type = "utmi";
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbphynop1 {
+	status = "disabled";
+};
+
+&usbphynop2 {
+	status = "disabled";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	disable-wp;
+	cap-sd-highspeed;
+	no-mmc;
+	no-sdio;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	no-sd;
+	no-sdio;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			/* SGTL5000 sys_mclk */
+			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1			0x030b0
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD			0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC			0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD			0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS			0x130b0
+		>;
+	};
+
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28		0x1b0b0
+		>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX		0x1b000
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX		0x3008
+			/* CAN1_SR */
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12			0x13008
+			/* CAN1_TERM */
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00			0x1b088
+		>;
+	};
+
+	pinctrl_can2: can2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX		0x1b000
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX		0x3008
+			/* CAN2_SR */
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13			0x13008
+		>;
+	};
+
+	pinctrl_counter0: counter0grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00			0x1b000
+		>;
+	};
+
+	pinctrl_counter1: counter1grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01			0x1b000
+		>;
+	};
+
+	pinctrl_counter2: counter2grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02			0x1b000
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO			0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI			0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK			0x100b1
+			/* CS */
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19			0x000b1
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* ITU656_nRESET */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02			0x1b0b0
+			/* CAM1_MIRROR */
+			MX6QDL_PAD_GPIO_3__GPIO1_IO03			0x130b0
+			/* CAM2_MIRROR */
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04			0x130b0
+			/* CAM_nDETECT */
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12			0x1b0b0
+			/* ISB_IN1 */
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22			0x130b0
+			/* ISB_nIN2 */
+			MX6QDL_PAD_EIM_A17__GPIO2_IO21			0x1b0b0
+			/* WARN_LIGHT */
+			MX6QDL_PAD_EIM_A19__GPIO2_IO19			0x100b0
+			/* ON2_FB */
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02			0x100b0
+			/* YACO_nIRQ */
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23			0x1b0b0
+			/* YACO_BOOT0 */
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30			0x130b0
+			/* YACO_nRESET */
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31			0x1b0b0
+			/* FORCE_ON1 */
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30			0x1b0b0
+			/* AUDIO_nRESET */
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21		0x1f0b0
+			/* ITU656_nPDN */
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20		0x1b0b0
+
+			/* New in HW revision 1 */
+			/* ON1_FB */
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20			0x100b0
+			/* DIP1_FB */
+			MX6QDL_PAD_DI0_PIN2__GPIO4_IO18			0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001f8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu1_csi0: ipu1csi0grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19		0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK	0x1b0b0
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			/* DEBUG0 */
+			MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16		0x1b0b0
+			/* DEBUG1 */
+			MX6QDL_PAD_DI0_PIN15__GPIO4_IO17		0x1b0b0
+			/* POWER_LED */
+			MX6QDL_PAD_EIM_CS1__GPIO2_IO24			0x1b0b0
+			/* ISB_LED */
+			MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31		0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__PWM1_OUT			0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT9__PWM2_OUT			0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT			0x1b0b0
+		>;
+	};
+
+	/* YaCO AUX Uart */
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA		0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA		0x1b0b1
+		>;
+	};
+
+	/* YaCO Touchscreen UART */
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA		0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA		0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA		0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA		0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__USB_OTG_OC			0x1b0b0
+			/* power enable, high active */
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22			0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD			0x170f9
+			MX6QDL_PAD_SD1_CLK__SD1_CLK			0x100f9
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0			0x170f9
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1			0x170f9
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2			0x170f9
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3			0x170f9
+			MX6QDL_PAD_GPIO_1__GPIO1_IO01			0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD			0x17099
+			MX6QDL_PAD_SD3_CLK__SD3_CLK			0x10099
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0			0x17099
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1			0x17099
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2			0x17099
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3			0x17099
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4			0x17099
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5			0x17099
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6			0x17099
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7			0x17099
+			MX6QDL_PAD_SD3_RST__SD3_RESET			0x1b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard-revb1.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard-revb1.dtsi
new file mode 100644
index 000000000000..3a21ae942273
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard-revb1.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
+//
+// Author: Fabio Estevam <fabio.estevam@freescale.com>
+
+#include "imx6qdl-wandboard.dtsi"
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000	/* uSDHC1 CD */
+			MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0x80000000	/* uSDHC3 CD */
+			MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x0f0b0		/* WL_REF_ON */
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x0f0b0		/* WL_RST_N */
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x000b0		/* WL_REG_ON */
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x80000000	/* WL_HOST_WAKE */
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x80000000	/* WL_WAKE */
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x80000000	/* RGMII_nRST */
+			MX6QDL_PAD_EIM_DA13__GPIO3_IO13		0x80000000	/* BT_ON */
+			MX6QDL_PAD_EIM_DA14__GPIO3_IO14		0x80000000	/* BT_WAKE */
+			MX6QDL_PAD_EIM_DA15__GPIO3_IO15		0x80000000	/* BT_HOST_WAKE */
+		>;
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	non-removable;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard-revc1.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard-revc1.dtsi
new file mode 100644
index 000000000000..cc707972f548
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard-revc1.dtsi
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
+//
+// Author: Fabio Estevam <fabio.estevam@freescale.com>
+
+#include "imx6qdl-wandboard.dtsi"
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_hog_c1>;
+
+	pinctrl_hog_c1: hogc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000	/* uSDHC1 CD */
+			MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0x80000000	/* uSDHC3 CD */
+			MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00	0x0f0b0		/* WIFI_ON (reset, active low) */
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x000b0		/* WL_REG_ON (unused) */
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x80000000	/* WL_HOST_WAKE, input */
+			MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31	0x0f0b0		/* GPIO5_IO31 (Wifi Power Enable) */
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x80000000	/* WL_WAKE (unused) */
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x80000000	/* BT_ON */
+			MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30	0x80000000	/* BT_WAKE */
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x80000000	/* BT_HOST_WAKE */
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x80000000	/* RGMII_nRST */
+		>;
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard-revd1.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard-revd1.dtsi
new file mode 100644
index 000000000000..8d44e758f1f3
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard-revd1.dtsi
@@ -0,0 +1,191 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
+//
+// Author: Fabio Estevam <fabio.estevam@freescale.com>
+
+#include "imx6qdl-wandboard.dtsi"
+
+/ {
+	reg_eth_phy: regulator-eth-phy {
+		compatible = "regulator-fixed";
+		regulator-name = "ETH_PHY";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio7 13 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&fec {
+	phy-supply = <&reg_eth_phy>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_hog_d1>;
+
+	pinctrl_hog_d1: hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000	/* USDHC1 CD */
+			MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0x80000000	/* uSDHC3 CD */
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29   	0x1f0b1		/* RGMII PHY reset */
+		>;
+	};
+
+	enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_16__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_19__SPDIF_OUT		0x1b0b0
+		>;
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	no-1-8-v;
+	non-removable;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard.dtsi
new file mode 100644
index 000000000000..26489eccd5fb
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-wandboard.dtsi
@@ -0,0 +1,381 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	sound {
+		compatible = "fsl,imx6-wandboard-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6-wandboard-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+
+	spdif_out: spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		audio-cpu = <&spdif>;
+		audio-codec = <&spdif_out>;
+	};
+
+	reg_1p5v: regulator-1p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P5V";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_2p8v: regulator-2p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usbotgvbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotgvbus>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c1>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mclk>;
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+		lrclk-strength = <3>;
+	};
+
+	camera@3c {
+		compatible = "ovti,ov5645";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5645>;
+		reg = <0x3c>;
+		clocks = <&clks IMX6QDL_CLK_CKO2>;
+		clock-frequency = <24000000>;
+		vdddo-supply = <&reg_1p8v>;
+		vdda-supply = <&reg_2p8v>;
+		vddd-supply = <&reg_1p5v>;
+		enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
+
+		port {
+			ov5645_to_mipi_csi2: endpoint {
+				remote-endpoint = <&mipi_csi2_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x4001b8b0
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x4001b8b0
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x4001b8b0
+		>;
+	};
+
+	pinctrl_mclk: mclkgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0
+		>;
+	};
+
+	pinctrl_ov5645: ov5645grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__CCM_CLKO2		0x000b0
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06		0x1b0b0
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0
+		>;
+	};
+
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD0__SPDIF_OUT		0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_EB3__UART3_RTS_B		0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+		>;
+	};
+
+	pinctrl_usbotgvbus: usbotgvbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x130b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x17059
+			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x10059
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x17059
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x17059
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x17059
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+		>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy>;
+	phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@1 {
+			reg = <1>;
+			qca,clk-out-frequency = <125000000>;
+		};
+	};
+};
+
+&mipi_csi {
+	status = "okay";
+
+	port@0 {
+		reg = <0>;
+
+		mipi_csi2_in: endpoint {
+			remote-endpoint = <&ov5645_to_mipi_csi2>;
+			clock-lanes = <0>;
+			data-lanes = <1 2>;
+		};
+	};
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-zii-rdu2.dtsi
index 525ff62b47f5..9ff183e4e069 100644
--- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-zii-rdu2.dtsi
@@ -277,7 +277,7 @@
 	pinctrl-0 = <&pinctrl_uart4>;
 	status = "okay";
 
-	rave-sp {
+	mcu {
 		compatible = "zii,rave-sp-rdu2";
 		current-speed = <1000000>;
 		#address-cells = <1>;
@@ -757,7 +757,7 @@
 
 				port@2 {
 					reg = <2>;
-					label = "cpu";
+					phy-mode = "rev-rmii";
 					ethernet = <&fec>;
 
 					fixed-link {
@@ -848,7 +848,7 @@
 	pinctrl-0 = <&pinctrl_audmux>;
 	status = "okay";
 
-	ssi1 {
+	mux-ssi1 {
 		fsl,audmux-port = <0>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_SYN |
@@ -860,7 +860,7 @@
 		>;
 	};
 
-	aud3 {
+	mux-aud3 {
 		fsl,audmux-port = <2>;
 		fsl,port-config = <
 			IMX_AUDMUX_V2_PTCR_SYN
@@ -868,7 +868,7 @@
 		>;
 	};
 
-	ssi2 {
+	mux-ssi2 {
 		fsl,audmux-port = <1>;
 		fsl,port-config = <
 			(IMX_AUDMUX_V2_PTCR_SYN |
@@ -880,7 +880,7 @@
 		>;
 	};
 
-	aud5 {
+	mux-aud5 {
 		fsl,audmux-port = <4>;
 		fsl,port-config = <
 			IMX_AUDMUX_V2_PTCR_SYN
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi
index 89c342f3a7c2..45bcfd7faf9d 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi
@@ -55,19 +55,19 @@
 
 	clocks {
 		ckil {
-			compatible = "fsl,imx-ckil", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
 
 		ckih1 {
-			compatible = "fsl,imx-ckih1", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <0>;
 		};
 
 		osc {
-			compatible = "fsl,imx-osc", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <24000000>;
 		};
@@ -143,21 +143,20 @@
 		#phy-cells = <0>;
 	};
 
-	soc {
+	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
 		interrupt-parent = <&gpc>;
 		ranges;
 
-		dma_apbh: dma-apbh@110000 {
+		dma_apbh: dma-controller@110000 {
 			compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
 			reg = <0x00110000 0x2000>;
 			interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>,
 				     <0 13 IRQ_TYPE_LEVEL_HIGH>,
 				     <0 13 IRQ_TYPE_LEVEL_HIGH>,
 				     <0 13 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
 			#dma-cells = <1>;
 			dma-channels = <4>;
 			clocks = <&clks IMX6QDL_CLK_APBH_DMA>;
@@ -264,7 +263,7 @@
 		};
 
 		pcie: pcie@1ffc000 {
-			compatible = "fsl,imx6q-pcie", "snps,dw-pcie";
+			compatible = "fsl,imx6q-pcie";
 			reg = <0x01ffc000 0x04000>,
 			      <0x01f00000 0x80000>;
 			reg-names = "dbi", "config";
@@ -272,10 +271,9 @@
 			#size-cells = <2>;
 			device_type = "pci";
 			bus-range = <0x00 0xff>;
-			ranges = <0x81000000 0 0          0x01f80000 0 0x00010000 /* downstream I/O */
-				  0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0 0          0x01f80000 0 0x00010000>, /* downstream I/O */
+				 <0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
 			num-lanes = <1>;
-			num-viewport = <4>;
 			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
@@ -291,7 +289,7 @@
 			status = "disabled";
 		};
 
-		bus@2000000 { /* AIPS1 */
+		aips1: bus@2000000 { /* AIPS1 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -399,11 +397,10 @@
 					reg = <0x02024000 0x4000>;
 					interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6QDL_CLK_ESAI_IPG>,
-						 <&clks IMX6QDL_CLK_ESAI_MEM>,
 						 <&clks IMX6QDL_CLK_ESAI_EXTAL>,
 						 <&clks IMX6QDL_CLK_ESAI_IPG>,
 						 <&clks IMX6QDL_CLK_SPBA>;
-					clock-names = "core", "mem", "extal", "fsys", "spba";
+					clock-names = "core", "extal", "fsys", "spba";
 					dmas = <&sdma 23 21 0>, <&sdma 24 21 0>;
 					dma-names = "rx", "tx";
 					status = "disabled";
@@ -477,12 +474,12 @@
 						<&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
 					dma-names = "rxa", "rxb", "rxc",
 							"txa", "txb", "txc";
-					fsl,asrc-rate  = <48000>;
+					fsl,asrc-rate = <48000>;
 					fsl,asrc-width = <16>;
 					status = "okay";
 				};
 
-				spba@203c000 {
+				spba-bus@203c000 {
 					reg = <0x0203c000 0x4000>;
 				};
 			};
@@ -714,8 +711,8 @@
 				reg_vdd3p0: regulator-3p0 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vdd3p0";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <3150000>;
+					regulator-min-microvolt = <2625000>;
+					regulator-max-microvolt = <3400000>;
 					regulator-always-on;
 					anatop-reg-offset = <0x120>;
 					anatop-vol-bit-shift = <8>;
@@ -763,7 +760,7 @@
 					regulator-name = "vddpu";
 					regulator-min-microvolt = <725000>;
 					regulator-max-microvolt = <1450000>;
-					regulator-enable-ramp-delay = <150>;
+					regulator-enable-ramp-delay = <380>;
 					anatop-reg-offset = <0x140>;
 					anatop-vol-bit-shift = <9>;
 					anatop-vol-bit-width = <5>;
@@ -809,6 +806,7 @@
 				reg = <0x020c9000 0x1000>;
 				interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6QDL_CLK_USBPHY1>;
+				phy-3p0-supply = <&reg_vdd3p0>;
 				fsl,anatop = <&anatop>;
 			};
 
@@ -817,6 +815,7 @@
 				reg = <0x020ca000 0x1000>;
 				interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6QDL_CLK_USBPHY2>;
+				phy-3p0-supply = <&reg_vdd3p0>;
 				fsl,anatop = <&anatop>;
 			};
 
@@ -930,7 +929,7 @@
 				interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			sdma: sdma@20ec000 {
+			sdma: dma-controller@20ec000 {
 				compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
 				reg = <0x020ec000 0x4000>;
 				interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
@@ -942,7 +941,7 @@
 			};
 		};
 
-		bus@2100000 { /* AIPS2 */
+		aips2: bus@2100000 { /* AIPS2 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -1051,9 +1050,11 @@
 				clocks = <&clks IMX6QDL_CLK_ENET>,
 					 <&clks IMX6QDL_CLK_ENET>,
 					 <&clks IMX6QDL_CLK_ENET_REF>,
-					 <&clks IMX6QDL_CLK_ENET_REF>;
-				clock-names = "ipg", "ahb", "ptp", "enet_out";
+					 <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+				clock-names = "ipg", "ahb", "ptp", "enet_clk_ref";
 				fsl,stop-mode = <&gpr 0x34 27>;
+				nvmem-cells = <&fec_mac_addr>;
+				nvmem-cell-names = "mac-address";
 				status = "disabled";
 			};
 
@@ -1158,7 +1159,7 @@
 				status = "disabled";
 			};
 
-			weim: weim@21b8000 {
+			weim: memory-controller@21b8000 {
 				#address-cells = <2>;
 				#size-cells = <1>;
 				compatible = "fsl,imx6q-weim";
@@ -1187,6 +1188,10 @@
 				tempmon_temp_grade: temp-grade@20 {
 					reg = <0x20 4>;
 				};
+
+				fec_mac_addr: mac-addr@88 {
+					reg = <0x88 6>;
+				};
 			};
 
 			tzasc@21d0000 { /* TZASC1 */
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-mba6b.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-mba6b.dts
new file mode 100644
index 000000000000..eee2e09d6e94
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-mba6b.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2015-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6qp-tqma6b.dtsi"
+#include "imx6qdl-mba6.dtsi"
+#include "imx6qdl-mba6b.dtsi"
+#include "imx6q-mba6.dtsi"
+
+/ {
+	model = "TQ TQMa6QP on MBa6x";
+	compatible = "tq,imx6qp-mba6x-b", "tq,mba6b",
+		     "tq,imx6qp-tqma6qp-b", "fsl,imx6qp";
+};
diff --git a/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-nitrogen6_max.dts
index 741d1ed338ca..741d1ed338ca 100644
--- a/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-nitrogen6_max.dts
diff --git a/arch/arm/boot/dts/imx6qp-nitrogen6_som2.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-nitrogen6_som2.dts
index 1593ac86b2a4..1593ac86b2a4 100644
--- a/arch/arm/boot/dts/imx6qp-nitrogen6_som2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-nitrogen6_som2.dts
diff --git a/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-phytec-mira-rdk-nand.dts
index f27d7ab42626..a18266598d39 100644
--- a/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-phytec-mira-rdk-nand.dts
@@ -8,6 +8,9 @@
 #include "imx6qp.dtsi"
 #include "imx6qdl-phytec-phycore-som.dtsi"
 #include "imx6qdl-phytec-mira.dtsi"
+#include "imx6qdl-phytec-mira-peb-eval-01.dtsi"
+#include "imx6qdl-phytec-mira-peb-av-02.dtsi"
+#include "imx6qdl-phytec-mira-peb-wlbt-05.dtsi"
 
 / {
 	model = "PHYTEC phyBOARD-Mira QuadPlus Carrier-Board with NAND";
diff --git a/arch/arm/boot/dts/imx6qp-prtwd3.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-prtwd3.dts
index b92e0f2748a5..cad985e341a1 100644
--- a/arch/arm/boot/dts/imx6qp-prtwd3.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-prtwd3.dts
@@ -123,7 +123,7 @@
 };
 
 &ecspi2 {
-	cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi2>;
 	status = "okay";
@@ -178,6 +178,8 @@
 				label = "cpu";
 				ethernet = <&fec>;
 				phy-mode = "rgmii-id";
+				rx-internal-delay-ps = <2000>;
+				tx-internal-delay-ps = <2000>;
 
 				fixed-link {
 					speed = <100>;
@@ -189,7 +191,7 @@
 };
 
 &ecspi3 {
-	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi3>;
 	status = "okay";
@@ -348,7 +350,7 @@
 	pinctrl-0 = <&pinctrl_usbotg>;
 	phy_type = "utmi";
 	dr_mode = "host";
-	disable-over-current;
+	over-current-active-low;
 	status = "okay";
 };
 
@@ -382,7 +384,7 @@
 	#address-cells = <1>;
 	#size-cells = <0>;
 
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 	};
@@ -546,7 +548,7 @@
 		>;
 	};
 
-	pinctrl_wifi_npd: wifinpd {
+	pinctrl_wifi_npd: wifinpdgrp {
 		fsl,pins = <
 			/* WL_REG_ON */
 			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10		0x13069
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-sabreauto.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-sabreauto.dts
new file mode 100644
index 000000000000..c5b220aeaefd
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-sabreauto.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2016 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include "imx6qp.dtsi"
+#include "imx6qdl-sabreauto.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad Plus SABRE Automotive Board";
+	compatible = "fsl,imx6qp-sabreauto", "fsl,imx6qp";
+};
+
+&i2c2 {
+	max7322: gpio@68 {
+		compatible = "maxim,max7322";
+		reg = <0x68>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__ENET_MDIO          0x1b0b0
+			MX6QDL_PAD_KEY_COL2__ENET_MDC           0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x1b018
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x1b018
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x1b018
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x1b018
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x1b018
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x1b018
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b018
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b018
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b018
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b018
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b018
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b018
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK        0x4001b0a8
+			MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+		>;
+	};
+};
+
+&pcie {
+	reset-gpio = <&max7310_c 5 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&vgen3_reg {
+	regulator-always-on;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-sabresd.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-sabresd.dts
new file mode 100644
index 000000000000..792697bd4551
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-sabresd.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2016 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include "imx6qp.dtsi"
+#include "imx6qdl-sabresd.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad Plus SABRE Smart Device Board";
+	compatible = "fsl,imx6qp-sabresd", "fsl,imx6qp";
+};
+
+&reg_arm {
+	vin-supply = <&sw2_reg>;
+};
+
+&iomuxc {
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10071
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			MX6QDL_PAD_NANDF_D4__SD2_DATA4		0x17059
+			MX6QDL_PAD_NANDF_D5__SD2_DATA5		0x17059
+			MX6QDL_PAD_NANDF_D6__SD2_DATA6		0x17059
+			MX6QDL_PAD_NANDF_D7__SD2_DATA7		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10071
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+		>;
+	};
+};
+
+&vgen3_reg {
+	regulator-always-on;
+};
+
+&pcie {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qp-tqma6b.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qp-tqma6b.dtsi
index bb6ff7c64b27..bb6ff7c64b27 100644
--- a/arch/arm/boot/dts/imx6qp-tqma6b.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-tqma6b.dtsi
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8037-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8037-mb7.dts
new file mode 100644
index 000000000000..3183abdd25aa
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8037-mb7.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6qp-tx6qp-8037.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-8037 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8037.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8037.dts
new file mode 100644
index 000000000000..174824a8138e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8037.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6qp.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6QP-8037 Module";
+	compatible = "karo,imx6qp-tx6qp", "fsl,imx6qp";
+};
+
+&ds1339 {
+	status = "disabled";
+};
+
+&gpmi {
+	status = "disabled";
+};
+
+&ipu2 {
+	status = "disabled";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	non-removable;
+	no-1-8-v;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
+			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8137-mb7.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8137-mb7.dts
new file mode 100644
index 000000000000..31854bc52e76
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8137-mb7.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6qp-tx6qp-8137.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-8137 Module on MB7 baseboard";
+	compatible = "karo,imx6qp-tx6qp", "fsl,imx6qp";
+};
+
+&ipu2 {
+	status = "disabled";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8137.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8137.dts
new file mode 100644
index 000000000000..dfe1535128fe
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-tx6qp-8137.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6qp.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lvds.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6QP-8137 Module";
+	compatible = "karo,imx6qp-tx6qp", "fsl,imx6qp";
+};
+
+&ds1339 {
+	status = "disabled";
+};
+
+&gpmi {
+	status = "disabled";
+};
+
+&ipu2 {
+	status = "disabled";
+};
+
+&sata {
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	non-removable;
+	no-1-8-v;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
+			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qp-vicutp.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-vicutp.dts
index 7bad7ca6b12e..49ff145fffe5 100644
--- a/arch/arm/boot/dts/imx6qp-vicutp.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-vicutp.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 #include "imx6qp.dtsi"
 #include "imx6qdl-vicut1.dtsi"
+#include "imx6qdl-vicut1-12inch.dtsi"
 
 / {
 	model = "Kverneland UT1P Board";
diff --git a/arch/arm/boot/dts/imx6qp-wandboard-revd1.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-wandboard-revd1.dts
index 08d8b78a2096..08d8b78a2096 100644
--- a/arch/arm/boot/dts/imx6qp-wandboard-revd1.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-wandboard-revd1.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-yapp4-crux-plus.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-yapp4-crux-plus.dts
new file mode 100644
index 000000000000..afaf4a6759d4
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-yapp4-crux-plus.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2021 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6qp.dtsi"
+#include "imx6dl-yapp4-common.dtsi"
+
+/ {
+	model = "Y Soft IOTA Crux+ i.MX6QuadPlus board";
+	compatible = "ysoft,imx6qp-yapp4-crux-plus", "fsl,imx6qp";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0xf0000000>;
+	};
+};
+
+&gpio_oled {
+	status = "okay";
+};
+
+&leds {
+	status = "okay";
+};
+
+&oled_1305 {
+	status = "okay";
+};
+
+&oled_1309 {
+	status = "okay";
+};
+
+&reg_pu {
+	regulator-always-on;
+};
+
+&reg_usb_h1_vbus {
+	status = "okay";
+};
+
+&touchkeys {
+	status = "okay";
+};
+
+&uart2 {
+	status = "disabled";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-yapp4-pegasus-plus.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-yapp4-pegasus-plus.dts
new file mode 100644
index 000000000000..770a85e0561c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-yapp4-pegasus-plus.dts
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2021 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6qp.dtsi"
+#include "imx6dl-yapp43-common.dtsi"
+
+/ {
+	model = "Y Soft IOTA Pegasus+ i.MX6QuadPlus board";
+	compatible = "ysoft,imx6qp-yapp4-pegasus-plus", "fsl,imx6qp";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0xf0000000>;
+	};
+};
+
+&beeper {
+	status = "okay";
+};
+
+&gpio_oled {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&leds {
+	status = "okay";
+};
+
+&oled_1305 {
+	status = "okay";
+};
+
+&oled_1309 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&reg_pu {
+	regulator-always-on;
+};
+
+&reg_usb_h1_vbus {
+	status = "okay";
+};
+
+&touchkeys {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qp-zii-rdu2.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-zii-rdu2.dts
index 57de447c4609..57de447c4609 100644
--- a/arch/arm/boot/dts/imx6qp-zii-rdu2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp-zii-rdu2.dts
diff --git a/arch/arm/boot/dts/imx6qp.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qp.dtsi
index b310f13a53f2..fc164991d2ae 100644
--- a/arch/arm/boot/dts/imx6qp.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qp.dtsi
@@ -9,12 +9,18 @@
 		ocram2: sram@940000 {
 			compatible = "mmio-sram";
 			reg = <0x00940000 0x20000>;
+			ranges = <0 0x00940000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 
 		ocram3: sram@960000 {
 			compatible = "mmio-sram";
 			reg = <0x00960000 0x20000>;
+			ranges = <0 0x00960000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 
@@ -110,5 +116,5 @@
 };
 
 &pcie {
-	compatible = "fsl,imx6qp-pcie", "snps,dw-pcie";
+	compatible = "fsl,imx6qp-pcie";
 };
diff --git a/arch/arm/boot/dts/imx6s-dhcom-drc02.dts b/arch/arm/boot/dts/nxp/imx/imx6s-dhcom-drc02.dts
index 4077b607c29e..e42c274a9014 100644
--- a/arch/arm/boot/dts/imx6s-dhcom-drc02.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6s-dhcom-drc02.dts
@@ -3,7 +3,7 @@
  * Copyright (C) 2021 DH electronics GmbH
  *
  * DHCOM iMX6 variant:
- * DHCM-iMX6S-C0800-R102-F0409-E-CAN2-RTC-I-01D2
+ * DHCM-iMX6S-C080-R102-F0409-E-CAN2-RTC-I-01D2
  * DHCOM PCB number: 493-400 or newer
  * DRC02 PCB number: 568-100 or newer
  */
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl-evk.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-evk.dts
new file mode 100644
index 000000000000..036705b783f4
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6sl-evk.dts
@@ -0,0 +1,654 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+//Copyright (C) 2013 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6sl.dtsi"
+
+/ {
+	model = "Freescale i.MX6 SoloLite EVK Board";
+	compatible = "fsl,imx6sl-evk", "fsl,imx6sl";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	backlight_display: backlight_display {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		led-user {
+			label = "debug";
+			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&swbst_reg>;
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&swbst_reg>;
+	};
+
+	reg_aud3v: regulator-aud3v {
+		compatible = "regulator-fixed";
+		regulator-name = "wm8962-supply-3v15";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+		regulator-boot-on;
+	};
+
+	reg_aud4v: regulator-aud4v {
+		compatible = "regulator-fixed";
+		regulator-name = "wm8962-supply-4v2";
+		regulator-min-microvolt = <4325000>;
+		regulator-max-microvolt = <4325000>;
+		regulator-boot-on;
+	};
+
+	reg_lcd_3v3: regulator-lcd-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
+		regulator-name = "lcd-3v3";
+		gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lcd_5v: regulator-lcd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	sound {
+		compatible = "fsl,imx6sl-evk-wm8962", "fsl,imx-audio-wm8962";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hp>;
+		model = "wm8962-audio";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Ext Spk", "SPKOUTL",
+			"Ext Spk", "SPKOUTR",
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC";
+		mux-int-port = <2>;
+		mux-ext-port = <3>;
+		hp-det-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
+	};
+
+	panel {
+		compatible = "sii,43wvf1g";
+		backlight = <&backlight_display>;
+		dvdd-supply = <&reg_lcd_3v3>;
+		avdd-supply = <&reg_lcd_5v>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux3>;
+	status = "okay";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p32", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_fec>;
+	pinctrl-1 = <&pinctrl_fec_sleep>;
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	codec: wm8962@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clks IMX6SL_CLK_EXTERN_AUDIO>;
+		DCVDD-supply = <&vgen3_reg>;
+		DBVDD-supply = <&reg_aud3v>;
+		AVDD-supply = <&vgen3_reg>;
+		CPVDD-supply = <&vgen3_reg>;
+		MICVDD-supply = <&reg_aud3v>;
+		PLLVDD-supply = <&vgen3_reg>;
+		SPKVDD1-supply = <&reg_aud4v>;
+		SPKVDD2-supply = <&reg_aud4v>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6SL_PAD_KEY_ROW7__GPIO4_IO07    0x17059
+			MX6SL_PAD_KEY_COL7__GPIO4_IO06    0x17059
+			MX6SL_PAD_SD2_DAT7__GPIO5_IO00    0x17059
+			MX6SL_PAD_SD2_DAT6__GPIO4_IO29    0x17059
+			MX6SL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059
+			MX6SL_PAD_KEY_COL4__GPIO4_IO00	0x80000000
+			MX6SL_PAD_KEY_COL5__GPIO4_IO02	0x80000000
+			MX6SL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x4130b0
+		>;
+	};
+
+	pinctrl_audmux3: audmux3grp {
+		fsl,pins = <
+			MX6SL_PAD_AUD_RXD__AUD3_RXD	  0x4130b0
+			MX6SL_PAD_AUD_TXC__AUD3_TXC	  0x4130b0
+			MX6SL_PAD_AUD_TXD__AUD3_TXD	  0x4110b0
+			MX6SL_PAD_AUD_TXFS__AUD3_TXFS	  0x4130b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO	0x100b1
+			MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI	0x100b1
+			MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK	0x100b1
+			MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11	0x80000000
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX6SL_PAD_FEC_MDC__FEC_MDC		0x1b0b0
+			MX6SL_PAD_FEC_MDIO__FEC_MDIO		0x1b0b0
+			MX6SL_PAD_FEC_CRS_DV__FEC_RX_DV		0x1b0b0
+			MX6SL_PAD_FEC_RXD0__FEC_RX_DATA0	0x1b0b0
+			MX6SL_PAD_FEC_RXD1__FEC_RX_DATA1	0x1b0b0
+			MX6SL_PAD_FEC_TX_EN__FEC_TX_EN		0x1b0b0
+			MX6SL_PAD_FEC_TXD0__FEC_TX_DATA0	0x1b0b0
+			MX6SL_PAD_FEC_TXD1__FEC_TX_DATA1	0x1b0b0
+			MX6SL_PAD_FEC_REF_CLK__FEC_REF_OUT	0x4001b0a8
+		>;
+	};
+
+	pinctrl_fec_sleep: fec-sleep-grp {
+		fsl,pins = <
+			MX6SL_PAD_FEC_MDC__GPIO4_IO23      0x3080
+			MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25   0x3080
+			MX6SL_PAD_FEC_RXD0__GPIO4_IO17     0x3080
+			MX6SL_PAD_FEC_RXD1__GPIO4_IO18     0x3080
+			MX6SL_PAD_FEC_TX_EN__GPIO4_IO22    0x3080
+			MX6SL_PAD_FEC_TXD0__GPIO4_IO24     0x3080
+			MX6SL_PAD_FEC_TXD1__GPIO4_IO16     0x3080
+			MX6SL_PAD_FEC_REF_CLK__GPIO4_IO26  0x3080
+		>;
+	};
+
+	pinctrl_hp: hpgrp {
+		fsl,pins = <
+			MX6SL_PAD_FEC_RX_ER__GPIO4_IO19	  0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6SL_PAD_I2C1_SCL__I2C1_SCL	0x4001b8b1
+			MX6SL_PAD_I2C1_SDA__I2C1_SDA	0x4001b8b1
+		>;
+	};
+
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6SL_PAD_I2C2_SCL__I2C2_SCL	0x4001b8b1
+			MX6SL_PAD_I2C2_SDA__I2C2_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_kpp: kppgrp {
+		fsl,pins = <
+			MX6SL_PAD_KEY_ROW0__KEY_ROW0    0x1b010
+			MX6SL_PAD_KEY_ROW1__KEY_ROW1    0x1b010
+			MX6SL_PAD_KEY_ROW2__KEY_ROW2    0x1b0b0
+			MX6SL_PAD_KEY_COL0__KEY_COL0    0x110b0
+			MX6SL_PAD_KEY_COL1__KEY_COL1    0x110b0
+			MX6SL_PAD_KEY_COL2__KEY_COL2    0x110b0
+		>;
+	};
+
+	pinctrl_lcd: lcdgrp {
+		fsl,pins = <
+			MX6SL_PAD_LCD_DAT0__LCD_DATA00 0x1b0b0
+			MX6SL_PAD_LCD_DAT1__LCD_DATA01 0x1b0b0
+			MX6SL_PAD_LCD_DAT2__LCD_DATA02 0x1b0b0
+			MX6SL_PAD_LCD_DAT3__LCD_DATA03 0x1b0b0
+			MX6SL_PAD_LCD_DAT4__LCD_DATA04 0x1b0b0
+			MX6SL_PAD_LCD_DAT5__LCD_DATA05 0x1b0b0
+			MX6SL_PAD_LCD_DAT6__LCD_DATA06 0x1b0b0
+			MX6SL_PAD_LCD_DAT7__LCD_DATA07 0x1b0b0
+			MX6SL_PAD_LCD_DAT8__LCD_DATA08 0x1b0b0
+			MX6SL_PAD_LCD_DAT9__LCD_DATA09 0x1b0b0
+			MX6SL_PAD_LCD_DAT10__LCD_DATA10 0x1b0b0
+			MX6SL_PAD_LCD_DAT11__LCD_DATA11 0x1b0b0
+			MX6SL_PAD_LCD_DAT12__LCD_DATA12 0x1b0b0
+			MX6SL_PAD_LCD_DAT13__LCD_DATA13 0x1b0b0
+			MX6SL_PAD_LCD_DAT14__LCD_DATA14 0x1b0b0
+			MX6SL_PAD_LCD_DAT15__LCD_DATA15 0x1b0b0
+			MX6SL_PAD_LCD_DAT16__LCD_DATA16 0x1b0b0
+			MX6SL_PAD_LCD_DAT17__LCD_DATA17 0x1b0b0
+			MX6SL_PAD_LCD_DAT18__LCD_DATA18 0x1b0b0
+			MX6SL_PAD_LCD_DAT19__LCD_DATA19 0x1b0b0
+			MX6SL_PAD_LCD_DAT20__LCD_DATA20 0x1b0b0
+			MX6SL_PAD_LCD_DAT21__LCD_DATA21 0x1b0b0
+			MX6SL_PAD_LCD_DAT22__LCD_DATA22 0x1b0b0
+			MX6SL_PAD_LCD_DAT23__LCD_DATA23 0x1b0b0
+			MX6SL_PAD_LCD_CLK__LCD_CLK 0x1b0b0
+			MX6SL_PAD_LCD_ENABLE__LCD_ENABLE 0x1b0b0
+			MX6SL_PAD_LCD_HSYNC__LCD_HSYNC 0x1b0b0
+			MX6SL_PAD_LCD_VSYNC__LCD_VSYNC 0x1b0b0
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX6SL_PAD_HSIC_STROBE__GPIO3_IO20 0x17059
+		>;
+	};
+
+	pinctrl_pwm1: pwmgrp {
+		fsl,pins = <
+			MX6SL_PAD_PWM1__PWM1_OUT 0x110b0
+		>;
+	};
+
+	pinctrl_reg_lcd_3v3: reglcd3v3grp {
+		fsl,pins = <
+			MX6SL_PAD_KEY_ROW5__GPIO4_IO03    0x17059
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6SL_PAD_UART1_RXD__UART1_RX_DATA	0x1b0b1
+			MX6SL_PAD_UART1_TXD__UART1_TX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_CMD__SD1_CMD		0x17059
+			MX6SL_PAD_SD1_CLK__SD1_CLK		0x10059
+			MX6SL_PAD_SD1_DAT0__SD1_DATA0		0x17059
+			MX6SL_PAD_SD1_DAT1__SD1_DATA1		0x17059
+			MX6SL_PAD_SD1_DAT2__SD1_DATA2		0x17059
+			MX6SL_PAD_SD1_DAT3__SD1_DATA3		0x17059
+			MX6SL_PAD_SD1_DAT4__SD1_DATA4		0x17059
+			MX6SL_PAD_SD1_DAT5__SD1_DATA5		0x17059
+			MX6SL_PAD_SD1_DAT6__SD1_DATA6		0x17059
+			MX6SL_PAD_SD1_DAT7__SD1_DATA7		0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_CMD__SD1_CMD		0x170b9
+			MX6SL_PAD_SD1_CLK__SD1_CLK		0x100b9
+			MX6SL_PAD_SD1_DAT0__SD1_DATA0		0x170b9
+			MX6SL_PAD_SD1_DAT1__SD1_DATA1		0x170b9
+			MX6SL_PAD_SD1_DAT2__SD1_DATA2		0x170b9
+			MX6SL_PAD_SD1_DAT3__SD1_DATA3		0x170b9
+			MX6SL_PAD_SD1_DAT4__SD1_DATA4		0x170b9
+			MX6SL_PAD_SD1_DAT5__SD1_DATA5		0x170b9
+			MX6SL_PAD_SD1_DAT6__SD1_DATA6		0x170b9
+			MX6SL_PAD_SD1_DAT7__SD1_DATA7		0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_CMD__SD1_CMD		0x170f9
+			MX6SL_PAD_SD1_CLK__SD1_CLK		0x100f9
+			MX6SL_PAD_SD1_DAT0__SD1_DATA0		0x170f9
+			MX6SL_PAD_SD1_DAT1__SD1_DATA1		0x170f9
+			MX6SL_PAD_SD1_DAT2__SD1_DATA2		0x170f9
+			MX6SL_PAD_SD1_DAT3__SD1_DATA3		0x170f9
+			MX6SL_PAD_SD1_DAT4__SD1_DATA4		0x170f9
+			MX6SL_PAD_SD1_DAT5__SD1_DATA5		0x170f9
+			MX6SL_PAD_SD1_DAT6__SD1_DATA6		0x170f9
+			MX6SL_PAD_SD1_DAT7__SD1_DATA7		0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x100b9
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170f9
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x100f9
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6SL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD		0x170b9
+			MX6SL_PAD_SD3_CLK__SD3_CLK		0x100b9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6SL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+		>;
+	};
+};
+
+&kpp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kpp>;
+	linux,keymap = <
+			MATRIX_KEY(0x0, 0x0, KEY_UP)         /* ROW0, COL0 */
+			MATRIX_KEY(0x0, 0x1, KEY_DOWN)       /* ROW0, COL1 */
+			MATRIX_KEY(0x0, 0x2, KEY_ENTER)      /* ROW0, COL2 */
+			MATRIX_KEY(0x1, 0x0, KEY_HOME)       /* ROW1, COL0 */
+			MATRIX_KEY(0x1, 0x1, KEY_RIGHT)      /* ROW1, COL1 */
+			MATRIX_KEY(0x1, 0x2, KEY_LEFT)       /* ROW1, COL2 */
+			MATRIX_KEY(0x2, 0x0, KEY_VOLUMEDOWN) /* ROW2, COL0 */
+			MATRIX_KEY(0x2, 0x1, KEY_VOLUMEUP)   /* ROW2, COL1 */
+	>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcd>;
+	status = "okay";
+
+	port {
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&sw2_reg>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&sw2_reg>;
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl-kobo-aura2.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-kobo-aura2.dts
new file mode 100644
index 000000000000..657d0f1b6115
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6sl-kobo-aura2.dts
@@ -0,0 +1,555 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device tree for the Kobo Aura 2 ebook reader
+ *
+ * Name on mainboard is: 37NB-E60QL0+4B1
+ * Serials start with: E60QL2
+ *
+ * Copyright 2022 Andreas Kemnade
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "imx6sl.dtsi"
+
+/ {
+	model = "Kobo Aura 2";
+	compatible = "kobo,aura2", "fsl,imx6sl";
+
+	aliases {
+		mmc0 = &usdhc2;
+		mmc1 = &usdhc3;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-cover {
+			label = "Cover";
+			gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+			wakeup-source;
+		};
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		led-0 {
+			label = "koboaura2:white:on";
+			gpios = <&gpio5 7 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_WHITE>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+
+	reg_wifi: regulator-wifi {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_power>;
+		regulator-name = "SD3_SPWR";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_reset>;
+		post-power-on-delay-ms = <20>;
+		reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_sleep>;
+	status = "okay";
+
+	lm3630a: backlight@36 {
+		compatible = "ti,lm3630a";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lm3630a_bl_gpio>;
+		reg = <0x36>;
+		enable-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0>;
+			led-sources = <0>;
+			label = "backlight";
+			default-brightness = <0>;
+			max-brightness = <255>;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_sleep>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	/* eKTF2232 at 0x15 */
+	/* FP9928 at 0x48 */
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	ricoh619: pmic@32 {
+		compatible = "ricoh,rc5t619";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ricoh_gpio>;
+		reg = <0x32>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		system-power-controller;
+
+		regulators {
+			dcdc1_reg: DCDC1 {
+				regulator-name = "DCDC1";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <900000>;
+					regulator-suspend-min-microvolt = <900000>;
+				};
+			};
+
+			/* Core3_3V3 */
+			dcdc2_reg: DCDC2 {
+				regulator-name = "DCDC2";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <3100000>;
+					regulator-suspend-min-microvolt = <3100000>;
+				};
+			};
+
+			dcdc3_reg: DCDC3 {
+				regulator-name = "DCDC3";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1140000>;
+					regulator-suspend-min-microvolt = <1140000>;
+				};
+			};
+
+			/* Core4_1V2 */
+			dcdc4_reg: DCDC4 {
+				regulator-name = "DCDC4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1140000>;
+					regulator-suspend-min-microvolt = <1140000>;
+				};
+			};
+
+			/* Core4_1V8 */
+			dcdc5_reg: DCDC5 {
+				regulator-name = "DCDC5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1700000>;
+					regulator-suspend-min-microvolt = <1700000>;
+				};
+			};
+
+			/* IR_3V3 */
+			ldo1_reg: LDO1  {
+				regulator-name = "LDO1";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* Core1_3V3 */
+			ldo2_reg: LDO2  {
+				regulator-name = "LDO2";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <3000000>;
+					regulator-suspend-min-microvolt = <3000000>;
+				};
+			};
+
+			/* Core5_1V2 */
+			ldo3_reg: LDO3  {
+				regulator-name = "LDO3";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "LDO4";
+				regulator-boot-on;
+			};
+
+			/* SPD_3V3 */
+			ldo5_reg: LDO5 {
+				regulator-name = "LDO5";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* DDR_0V6 */
+			ldo6_reg: LDO6 {
+				regulator-name = "LDO6";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* VDD_PWM */
+			ldo7_reg: LDO7 {
+				regulator-name = "LDO7";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* ldo_1v8 */
+			ldo8_reg: LDO8 {
+				regulator-name = "LDO8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "LDO9";
+				regulator-boot-on;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "LDO10";
+				regulator-boot-on;
+			};
+
+			ldortc1_reg: LDORTC1  {
+				regulator-name = "LDORTC1";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&dcdc2_reg>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&dcdc2_reg>;
+};
+
+&reg_arm {
+	vin-supply = <&dcdc3_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&dcdc1_reg>;
+};
+
+&reg_pu {
+	vin-supply = <&dcdc1_reg>;
+};
+
+&snvs_rtc {
+	/*
+	 * We are using the RTC in the PMIC, but this one is not disabled
+	 * in imx6sl.dtsi.
+	 */
+	status = "disabled";
+};
+
+&uart1 {
+	/* J4, through-holes */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart4 {
+	/* TP198, next to J4, SMD pads */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc2_sleep>;
+	non-removable;
+	status = "okay";
+
+	/* internal uSD card */
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc3_sleep>;
+	vmmc-supply = <&reg_wifi>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	cap-power-off-card;
+	non-removable;
+	status = "okay";
+
+	/*
+	 * RTL8189F SDIO WiFi
+	 */
+};
+
+&usbotg1 {
+	disable-over-current;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpio_keys: gpio-keysgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT1__GPIO5_IO08  0x17059
+			MX6SL_PAD_SD1_DAT4__GPIO5_IO12  0x17059
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x4001f8b1
+			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c1_sleep: i2c1-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x400108b1
+			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x400108b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x4001f8b1
+			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c2_sleep: i2c2-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x400108b1
+			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x400108b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6SL_PAD_REF_CLK_24M__I2C3_SCL  0x4001f8b1
+			MX6SL_PAD_REF_CLK_32K__I2C3_SDA  0x4001f8b1
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT6__GPIO5_IO07 0x17059
+		>;
+	};
+
+	pinctrl_lm3630a_bl_gpio: lm3630a-bl-gpiogrp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10 0x10059 /* HWEN */
+		>;
+	};
+
+	pinctrl_ricoh_gpio: ricoh-gpiogrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_CLK__GPIO5_IO15	0x1b8b1 /* ricoh619 chg */
+			MX6SL_PAD_SD1_DAT0__GPIO5_IO11	0x1b8b1 /* ricoh619 irq */
+			MX6SL_PAD_KEY_COL2__GPIO3_IO28	0x1b8b1 /* ricoh619 bat_low_int */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1
+			MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6SL_PAD_KEY_ROW6__UART4_TX_DATA 0x1b0b1
+			MX6SL_PAD_KEY_COL6__UART4_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x13059
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130b9
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170f9
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130f9
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2_sleep: usdhc2-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__GPIO5_IO04		0x100f9
+			MX6SL_PAD_SD2_CLK__GPIO5_IO05		0x100f9
+			MX6SL_PAD_SD2_DAT0__GPIO5_IO01		0x100f9
+			MX6SL_PAD_SD2_DAT1__GPIO4_IO30		0x100f9
+			MX6SL_PAD_SD2_DAT2__GPIO5_IO03		0x100f9
+			MX6SL_PAD_SD2_DAT3__GPIO4_IO28		0x100f9
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x11059
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x11059
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x11059
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x11059
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x11059
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x11059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170b9
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170b9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170b9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170b9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170b9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170f9
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170f9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170f9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170f9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170f9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc3_sleep: usdhc3-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__GPIO5_IO21	0x100c1
+			MX6SL_PAD_SD3_CLK__GPIO5_IO18	0x100c1
+			MX6SL_PAD_SD3_DAT0__GPIO5_IO19	0x100c1
+			MX6SL_PAD_SD3_DAT1__GPIO5_IO20	0x100c1
+			MX6SL_PAD_SD3_DAT2__GPIO5_IO16	0x100c1
+			MX6SL_PAD_SD3_DAT3__GPIO5_IO17	0x100c1
+		>;
+	};
+
+	pinctrl_wifi_power: wifi-powergrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_DAT6__GPIO4_IO29	0x10059	/* WIFI_3V3_ON */
+		>;
+	};
+
+	pinctrl_wifi_reset: wifi-resetgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_DAT7__GPIO5_IO00	0x10059	/* WIFI_RST */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6sl-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx6sl-pinfunc.h
index bcf16060ecdc..bcf16060ecdc 100644
--- a/arch/arm/boot/dts/imx6sl-pinfunc.h
+++ b/arch/arm/boot/dts/nxp/imx/imx6sl-pinfunc.h
diff --git a/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts
index a17b8bbbdb95..b6c336e3079e 100644
--- a/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts
@@ -18,6 +18,21 @@
 	model = "Tolino Shine 2 HD";
 	compatible = "kobo,tolino-shine2hd", "fsl,imx6sl";
 
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ec 0 50000>;
+		power-supply = <&backlight_regulator>;
+	};
+
+	backlight_regulator: regulator-backlight {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight_power>;
+		regulator-name = "backlight";
+		gpio = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	chosen {
 		stdout-path = &uart1;
 	};
@@ -27,7 +42,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 
-		cover {
+		key-cover {
 			label = "Cover";
 			gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
 			linux,code = <SW_LID>;
@@ -35,19 +50,19 @@
 			wakeup-source;
 		};
 
-		fl {
+		key-fl {
 			label = "Frontlight";
 			gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_BRIGHTNESS_CYCLE>;
 		};
 
-		home {
+		key-home {
 			label = "Home";
 			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_HOME>;
 		};
 
-		power {
+		key-power {
 			label = "Power";
 			gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
@@ -60,11 +75,17 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_led>;
 
-		on {
+		led-0 {
 			label = "tolinoshine2hd:white:on";
 			gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "timer";
 		};
+
+		led-1 {
+			label = "tolinoshine2hd:white:backlightboost";
+			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+		};
 	};
 
 	memory@80000000 {
@@ -117,11 +138,13 @@
 		pinctrl-0 = <&pinctrl_zforce>;
 		reg = <0x50>;
 		interrupt-parent = <&gpio5>;
-		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
 		vdd-supply = <&ldo1_reg>;
 		reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
-		x-size = <1072>;
-		y-size = <1448>;
+		touchscreen-size-x = <1072>;
+		touchscreen-size-y = <1448>;
+		touchscreen-swapped-x-y;
+		touchscreen-inverted-x;
 	};
 
 	/* TODO: TPS65185 PMIC for E Ink at 0x68 */
@@ -140,7 +163,7 @@
 		pinctrl-0 = <&pinctrl_ricoh_gpio>;
 		reg = <0x32>;
 		interrupt-parent = <&gpio5>;
-		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 		system-power-controller;
 
 		regulators {
@@ -299,6 +322,12 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
 
+	pinctrl_backlight_power: backlight-powergrp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10 0x10059
+		>;
+	};
+
 	pinctrl_gpio_keys: gpio-keysgrp {
 		fsl,pins = <
 			MX6SL_PAD_SD1_DAT1__GPIO5_IO08  0x17059
@@ -353,7 +382,7 @@
 		>;
 	};
 
-	pinctrl_i2c1_sleep: i2c1grp-sleep {
+	pinctrl_i2c1_sleep: i2c1sleep-grp {
 		fsl,pins = <
 			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x400108b1
 			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x400108b1
@@ -367,7 +396,7 @@
 		>;
 	};
 
-	pinctrl_i2c2_sleep: i2c2grp-sleep {
+	pinctrl_i2c2_sleep: i2c2sleep-grp {
 		fsl,pins = <
 			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x400108b1
 			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x400108b1
@@ -383,7 +412,8 @@
 
 	pinctrl_led: ledgrp {
 		fsl,pins = <
-			MX6SL_PAD_SD1_DAT2__GPIO5_IO13 0x17059
+			MX6SL_PAD_SD1_DAT2__GPIO5_IO13    0x17059
+			MX6SL_PAD_EPDC_SDCE2__GPIO1_IO29  0x17059
 		>;
 	};
 
@@ -426,7 +456,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
 		fsl,pins = <
 			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170b9
 			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130b9
@@ -437,7 +467,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_200mhz: usdhc2grp-200mhz {
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
 		fsl,pins = <
 			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170f9
 			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130f9
@@ -448,7 +478,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_sleep: usdhc2grp-sleep {
+	pinctrl_usdhc2_sleep: usdhc2sleep-grp {
 		fsl,pins = <
 			MX6SL_PAD_SD2_CMD__GPIO5_IO04		0x100f9
 			MX6SL_PAD_SD2_CLK__GPIO5_IO05		0x100f9
@@ -470,7 +500,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
 		fsl,pins = <
 			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170b9
 			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170b9
@@ -481,7 +511,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
 		fsl,pins = <
 			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170f9
 			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170f9
@@ -492,7 +522,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_sleep: usdhc3grp-sleep {
+	pinctrl_usdhc3_sleep: usdhc3sleep-grp {
 		fsl,pins = <
 			MX6SL_PAD_SD3_CMD__GPIO5_IO21	0x100c1
 			MX6SL_PAD_SD3_CLK__GPIO5_IO18	0x100c1
@@ -597,6 +627,7 @@
 
 &usbotg1 {
 	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
 	disable-over-current;
 	srp-disable;
 	hnp-disable;
diff --git a/arch/arm/boot/dts/imx6sl-tolino-shine3.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine3.dts
index e3f1e8d79528..5ba6f15e9ed5 100644
--- a/arch/arm/boot/dts/imx6sl-tolino-shine3.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine3.dts
@@ -52,6 +52,13 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
 
+	pinctrl_cyttsp5_gpio: cyttsp5-gpiogrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT3__GPIO5_IO06                0x17059 /* TP_INT */
+			MX6SL_PAD_SD1_DAT2__GPIO5_IO13                0x10059 /* TP_RST */
+		>;
+	};
+
 	pinctrl_gpio_keys: gpio-keysgrp {
 		fsl,pins = <
 			MX6SL_PAD_SD1_DAT1__GPIO5_IO08	0x17059	/* PWR_SW */
@@ -104,7 +111,7 @@
 		>;
 	};
 
-	pinctrl_i2c1_sleep: i2c1grp-sleep {
+	pinctrl_i2c1_sleep: i2c1sleep-grp {
 		fsl,pins = <
 			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x400108b1
 			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x400108b1
@@ -118,7 +125,7 @@
 		>;
 	};
 
-	pinctrl_i2c2_sleep: i2c2grp-sleep {
+	pinctrl_i2c2_sleep: i2c2sleep-grp {
 		fsl,pins = <
 			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x400108b1
 			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x400108b1
@@ -183,7 +190,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
 		fsl,pins = <
 			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170b9
 			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130b9
@@ -194,7 +201,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_200mhz: usdhc2grp-200mhz {
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
 		fsl,pins = <
 			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170f9
 			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130f9
@@ -205,7 +212,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_sleep: usdhc2grp-sleep {
+	pinctrl_usdhc2_sleep: usdhc2sleep-grp {
 		fsl,pins = <
 			MX6SL_PAD_SD2_CMD__GPIO5_IO04		0x100f9
 			MX6SL_PAD_SD2_CLK__GPIO5_IO05		0x100f9
@@ -227,7 +234,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
 		fsl,pins = <
 			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170b9
 			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170b9
@@ -238,7 +245,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
 		fsl,pins = <
 			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170f9
 			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170f9
@@ -249,7 +256,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_sleep: usdhc3grp-sleep {
+	pinctrl_usdhc3_sleep: usdhc3sleep-grp {
 		fsl,pins = <
 			MX6SL_PAD_SD3_CMD__GPIO5_IO21	0x100c1
 			MX6SL_PAD_SD3_CLK__GPIO5_IO18	0x100c1
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision.dts
new file mode 100644
index 000000000000..7cda1f21e418
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision.dts
@@ -0,0 +1,489 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device tree for the Tolino Vison ebook reader
+ *
+ * Name on mainboard is: 37NB-E60Q30+4A3
+ * Serials start with: 6032
+ *
+ * Copyright 2023 Andreas Kemnade
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6sl.dtsi"
+
+/ {
+	model = "Tolino Vision";
+	compatible = "kobo,tolino-vision", "fsl,imx6sl";
+
+	aliases {
+		mmc0 = &usdhc4;
+		mmc1 = &usdhc2;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ec 0 50000>;
+		power-supply = <&backlight_regulator>;
+	};
+
+	backlight_regulator: regulator-backlight {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight_power>;
+		regulator-name = "backlight";
+		gpio = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-cover {
+			/* magnetic sensor in the corner next to the uSD slot */
+			label = "Cover";
+			gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+			wakeup-source;
+		};
+
+		key-fl {
+			label = "Frontlight";
+			gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BRIGHTNESS_CYCLE>;
+		};
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-0 {
+			/* LED on home button */
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			/* LED on power button */
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio5 7 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reg_wifi: regulator-wifi {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_power>;
+		regulator-name = "SD3_SPWR";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
+	};
+
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_reset>;
+		post-power-on-delay-ms = <20>;
+		reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_sleep>;
+	status = "okay";
+
+	touchscreen@15 {
+		compatible = "elan,ektf2132";
+		reg = <0x15>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ts>;
+		power-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH>;
+		interrupts-extended = <&gpio5 6 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	accelerometer@1d {
+		compatible = "fsl,mma8652";
+		reg = <0x1d>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_sleep>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	ec: embedded-controller@43 {
+		compatible = "netronix,ntxec";
+		reg = <0x43>;
+		#pwm-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ec>;
+		interrupts-extended = <&gpio5 11 IRQ_TYPE_EDGE_FALLING>;
+		system-power-controller;
+	};
+};
+
+&snvs_rtc {
+	/*
+	 * We are using the RTC in the PMIC, but this one is not disabled
+	 * in imx6sl.dtsi.
+	 */
+	status = "disabled";
+};
+
+&uart1 {
+	/* J4 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart4 {
+	/* J9 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc2_sleep>;
+	cd-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	/* removable uSD card */
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc3_sleep>;
+	vmmc-supply = <&reg_wifi>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	cap-power-off-card;
+	non-removable;
+	status = "okay";
+
+	/* CyberTan WC121 (BCM43362) SDIO WiFi */
+};
+
+&usdhc4 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	pinctrl-1 = <&pinctrl_usdhc4_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc4_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc4_sleep>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	status = "okay";
+
+	/* internal eMMC */
+};
+
+&usbotg1 {
+	disable-over-current;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_backlight_power: backlight-powergrp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10 0x10059
+		>;
+	};
+
+	pinctrl_ec: ecgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT0__GPIO5_IO11  0x17000
+		>;
+	};
+
+	pinctrl_gpio_keys: gpio-keysgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT1__GPIO5_IO08  0x110B0
+			MX6SL_PAD_SD1_DAT4__GPIO5_IO12  0x110B0
+			MX6SL_PAD_KEY_COL1__GPIO3_IO26  0x11030
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x4001f8b1
+			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c1_sleep: i2c1-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x400108b1
+			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x400108b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x4001f8b1
+			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c2_sleep: i2c2-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x400108b1
+			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x400108b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6SL_PAD_REF_CLK_24M__I2C3_SCL  0x4001f8b1
+			MX6SL_PAD_REF_CLK_32K__I2C3_SDA  0x4001f8b1
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT6__GPIO5_IO07    0x17059
+			MX6SL_PAD_SD1_DAT7__GPIO5_IO10    0x17059
+			MX6SL_PAD_EPDC_SDCE2__GPIO1_IO29  0x17059
+		>;
+	};
+
+	pinctrl_ts: tsgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT2__GPIO5_IO13	0x110B0
+			MX6SL_PAD_SD1_DAT3__GPIO5_IO06	0x1B0B1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1
+			MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6SL_PAD_KEY_ROW6__UART4_TX_DATA 0x1b0b1
+			MX6SL_PAD_KEY_COL6__UART4_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x13059
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			MX6SL_PAD_SD2_DAT4__GPIO5_IO02		0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130b9
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170f9
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130f9
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2_sleep: usdhc2-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__GPIO5_IO04		0x100f9
+			MX6SL_PAD_SD2_CLK__GPIO5_IO05		0x100f9
+			MX6SL_PAD_SD2_DAT0__GPIO5_IO01		0x100f9
+			MX6SL_PAD_SD2_DAT1__GPIO4_IO30		0x100f9
+			MX6SL_PAD_SD2_DAT2__GPIO5_IO03		0x100f9
+			MX6SL_PAD_SD2_DAT3__GPIO4_IO28		0x100f9
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x11059
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x11059
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x11059
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x11059
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x11059
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x11059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170b9
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170b9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170b9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170b9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170b9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170f9
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170f9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170f9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170f9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170f9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc3_sleep: usdhc3-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__GPIO5_IO21	0x100c1
+			MX6SL_PAD_SD3_CLK__GPIO5_IO18	0x100c1
+			MX6SL_PAD_SD3_DAT0__GPIO5_IO19	0x100c1
+			MX6SL_PAD_SD3_DAT1__GPIO5_IO20	0x100c1
+			MX6SL_PAD_SD3_DAT2__GPIO5_IO16	0x100c1
+			MX6SL_PAD_SD3_DAT3__GPIO5_IO17	0x100c1
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6SL_PAD_FEC_TX_CLK__SD4_CMD		0x17059
+			MX6SL_PAD_FEC_MDIO__SD4_CLK		0x13059
+			MX6SL_PAD_FEC_RX_ER__SD4_DATA0		0x17059
+			MX6SL_PAD_FEC_CRS_DV__SD4_DATA1		0x17059
+			MX6SL_PAD_FEC_RXD1__SD4_DATA2		0x17059
+			MX6SL_PAD_FEC_TXD0__SD4_DATA3		0x17059
+			MX6SL_PAD_FEC_MDC__SD4_DATA4		0x17059
+			MX6SL_PAD_FEC_RXD0__SD4_DATA5		0x17059
+			MX6SL_PAD_FEC_TX_EN__SD4_DATA6		0x17059
+			MX6SL_PAD_FEC_TXD1__SD4_DATA7		0x17059
+			MX6SL_PAD_FEC_REF_CLK__SD4_RESET	0x17068
+		>;
+	};
+
+	pinctrl_usdhc4_100mhz: usdhc4-100mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_FEC_TX_CLK__SD4_CMD		0x170b9
+			MX6SL_PAD_FEC_MDIO__SD4_CLK		0x130b9
+			MX6SL_PAD_FEC_RX_ER__SD4_DATA0		0x170b9
+			MX6SL_PAD_FEC_CRS_DV__SD4_DATA1		0x170b9
+			MX6SL_PAD_FEC_RXD1__SD4_DATA2		0x170b9
+			MX6SL_PAD_FEC_TXD0__SD4_DATA3		0x170b9
+			MX6SL_PAD_FEC_MDC__SD4_DATA4		0x170b9
+			MX6SL_PAD_FEC_RXD0__SD4_DATA5		0x170b9
+			MX6SL_PAD_FEC_TX_EN__SD4_DATA6		0x170b9
+			MX6SL_PAD_FEC_TXD1__SD4_DATA7		0x170b9
+		>;
+	};
+
+	pinctrl_usdhc4_200mhz: usdhc4-200mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_FEC_TX_CLK__SD4_CMD		0x170f9
+			MX6SL_PAD_FEC_MDIO__SD4_CLK		0x130f9
+			MX6SL_PAD_FEC_RX_ER__SD4_DATA0		0x170f9
+			MX6SL_PAD_FEC_CRS_DV__SD4_DATA1		0x170f9
+			MX6SL_PAD_FEC_RXD1__SD4_DATA2		0x170f9
+			MX6SL_PAD_FEC_TXD0__SD4_DATA3		0x170f9
+			MX6SL_PAD_FEC_MDC__SD4_DATA4		0x170f9
+			MX6SL_PAD_FEC_RXD0__SD4_DATA5		0x170f9
+			MX6SL_PAD_FEC_TX_EN__SD4_DATA6		0x170f9
+			MX6SL_PAD_FEC_TXD1__SD4_DATA7		0x170f9
+		>;
+	};
+
+	pinctrl_usdhc4_sleep: usdhc4-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_FEC_TX_CLK__GPIO4_IO21	0x100c1
+			MX6SL_PAD_FEC_MDIO__GPIO4_IO20		0x100c1
+			MX6SL_PAD_FEC_RX_ER__GPIO4_IO19		0x100c1
+			MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25	0x100c1
+			MX6SL_PAD_FEC_RXD1__GPIO4_IO18		0x100c1
+			MX6SL_PAD_FEC_TXD0__GPIO4_IO24		0x100c1
+			MX6SL_PAD_FEC_MDC__GPIO4_IO23		0x100c1
+			MX6SL_PAD_FEC_RXD0__GPIO4_IO17		0x100c1
+			MX6SL_PAD_FEC_TX_EN__GPIO4_IO22		0x100c1
+			MX6SL_PAD_FEC_TXD1__GPIO4_IO16		0x100c1
+		>;
+	};
+
+	pinctrl_wifi_power: wifi-powergrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_DAT6__GPIO4_IO29	0x10059	/* WIFI_3V3_ON */
+		>;
+	};
+
+	pinctrl_wifi_reset: wifi-resetgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_DAT7__GPIO5_IO00	0x10059	/* WIFI_RST */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision5.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision5.dts
new file mode 100644
index 000000000000..f8709a952409
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision5.dts
@@ -0,0 +1,380 @@
+// SPDX-License-Identifier: (GPL-2.0)
+/*
+ * Device tree for the Tolino Vision 5 ebook reader
+ *
+ * Name on mainboard is: 37NB-E70K0M+6A3
+ * Serials start with: E70K02 (a number also seen in
+ * vendor kernel sources)
+ *
+ * This mainboard seems to be equipped with different SoCs.
+ * In the Tolino Vision 5 ebook reader it is a i.MX6SL
+ *
+ * Copyright 2021 Andreas Kemnade
+ * based on works
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6sl.dtsi"
+#include "e70k02.dtsi"
+
+/ {
+	model = "Tolino Vision 5";
+	compatible = "kobo,tolino-vision5", "fsl,imx6sl";
+};
+
+&epd_pmic_supply {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_epd_pmic_supply>;
+};
+
+&gpio_keys {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_keys>;
+};
+
+&i2c1 {
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_sleep>;
+};
+
+&i2c2 {
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_sleep>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_cyttsp5_gpio: cyttsp5-gpiogrp {
+		fsl,pins = <
+			MX6SL_PAD_FEC_TXD0__GPIO4_IO24          0x17059 /* TP_INT */
+			MX6SL_PAD_FEC_RXD1__GPIO4_IO18          0x10059 /* TP_RST */
+		>;
+	};
+
+	pinctrl_epd_pmic_supply: epd-pmic-supplygrp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRWAKEUP__GPIO2_IO14    0x40010059
+		>;
+	};
+
+	pinctrl_gpio_keys: gpio-keysgrp {
+		fsl,pins = <
+			MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25	0x17059	/* PWR_SW */
+			MX6SL_PAD_FEC_MDC__GPIO4_IO23	0x17059	/* HALL_EN */
+			MX6SL_PAD_KEY_COL4__GPIO4_IO00		0x17059	/* PAGE_UP */
+			MX6SL_PAD_KEY_COL5__GPIO4_IO02		0x17059	/* PAGE_DOWN */
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6SL_PAD_LCD_DAT1__GPIO2_IO21	0x79
+			MX6SL_PAD_LCD_DAT4__GPIO2_IO24	0x79
+			MX6SL_PAD_LCD_DAT5__GPIO2_IO25	0x79
+			MX6SL_PAD_LCD_DAT6__GPIO2_IO26	0x79
+			MX6SL_PAD_LCD_DAT7__GPIO2_IO27	0x79
+			MX6SL_PAD_LCD_DAT8__GPIO2_IO28	0x79
+			MX6SL_PAD_LCD_DAT9__GPIO2_IO29	0x79
+			MX6SL_PAD_LCD_DAT10__GPIO2_IO30	0x79
+			MX6SL_PAD_LCD_DAT11__GPIO2_IO31	0x79
+			MX6SL_PAD_LCD_DAT12__GPIO3_IO00	0x79
+			MX6SL_PAD_LCD_DAT13__GPIO3_IO01	0x79
+			MX6SL_PAD_LCD_DAT14__GPIO3_IO02	0x79
+			MX6SL_PAD_LCD_DAT15__GPIO3_IO03	0x79
+			MX6SL_PAD_LCD_DAT16__GPIO3_IO04	0x79
+			MX6SL_PAD_LCD_DAT17__GPIO3_IO05	0x79
+			MX6SL_PAD_LCD_DAT18__GPIO3_IO06	0x79
+			MX6SL_PAD_LCD_DAT19__GPIO3_IO07	0x79
+			MX6SL_PAD_LCD_DAT20__GPIO3_IO08	0x79
+			MX6SL_PAD_LCD_DAT21__GPIO3_IO09	0x79
+			MX6SL_PAD_LCD_DAT22__GPIO3_IO10	0x79
+			MX6SL_PAD_LCD_DAT23__GPIO3_IO11	0x79
+			MX6SL_PAD_LCD_CLK__GPIO2_IO15		0x79
+			MX6SL_PAD_LCD_ENABLE__GPIO2_IO16	0x79
+			MX6SL_PAD_LCD_HSYNC__GPIO2_IO17	0x79
+			MX6SL_PAD_LCD_VSYNC__GPIO2_IO18	0x79
+			MX6SL_PAD_LCD_RESET__GPIO2_IO19	0x79
+			MX6SL_PAD_FEC_TX_CLK__GPIO4_IO21	0x79
+			MX6SL_PAD_FEC_REF_CLK__GPIO4_IO26	0x79
+			MX6SL_PAD_KEY_COL3__GPIO3_IO30		0x79
+			MX6SL_PAD_KEY_ROW7__GPIO4_IO07		0x79
+			MX6SL_PAD_ECSPI2_MOSI__GPIO4_IO13	0x79
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x4001f8b1
+			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c1_sleep: i2c1sleep-grp {
+		fsl,pins = <
+			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x400108b1
+			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x400108b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x4001f8b1
+			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c2_sleep: i2c2sleep-grp {
+		fsl,pins = <
+			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x400108b1
+			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x400108b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6SL_PAD_REF_CLK_24M__I2C3_SCL  0x4001f8b1
+			MX6SL_PAD_REF_CLK_32K__I2C3_SDA  0x4001f8b1
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX6SL_PAD_FEC_RXD0__GPIO4_IO17	0x10059
+		>;
+	};
+
+	pinctrl_lm3630a_bl_gpio: lm3630a-bl-gpiogrp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10		0x10059 /* HWEN */
+		>;
+	};
+
+	pinctrl_ricoh_gpio: ricoh-gpiogrp {
+		fsl,pins = <
+			MX6SL_PAD_FEC_MDIO__GPIO4_IO20		0x1b8b1 /* ricoh619 chg */
+			MX6SL_PAD_FEC_RX_ER__GPIO4_IO19		0x1b8b1 /* ricoh619 irq */
+			MX6SL_PAD_KEY_COL2__GPIO3_IO28		0x1b8b1 /* ricoh619 bat_low_int */
+		>;
+	};
+
+	pinctrl_sy7636_gpio: sy7636-gpiogrp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_VCOM0__GPIO2_IO03        0x40010059 /* VCOM_CTRL */
+			MX6SL_PAD_EPDC_PWRCTRL1__GPIO2_IO08     0x40010059 /* EN */
+			MX6SL_PAD_EPDC_PWRSTAT__GPIO2_IO13      0x17059 /* PWR_GOOD */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1
+			MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_CMD__SD1_CMD	0x17059
+			MX6SL_PAD_SD1_CLK__SD1_CLK	0x17059
+			MX6SL_PAD_SD1_DAT0__SD1_DATA0	0x17059
+			MX6SL_PAD_SD1_DAT1__SD1_DATA1	0x17059
+			MX6SL_PAD_SD1_DAT2__SD1_DATA2	0x17059
+			MX6SL_PAD_SD1_DAT3__SD1_DATA3	0x17059
+			MX6SL_PAD_SD1_DAT4__SD1_DATA4	0x17059
+			MX6SL_PAD_SD1_DAT5__SD1_DATA5	0x17059
+			MX6SL_PAD_SD1_DAT6__SD1_DATA6	0x17059
+			MX6SL_PAD_SD1_DAT7__SD1_DATA7	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_CMD__SD1_CMD	0x170b9
+			MX6SL_PAD_SD1_CLK__SD1_CLK	0x170b9
+			MX6SL_PAD_SD1_DAT0__SD1_DATA0	0x170b9
+			MX6SL_PAD_SD1_DAT1__SD1_DATA1	0x170b9
+			MX6SL_PAD_SD1_DAT2__SD1_DATA2	0x170b9
+			MX6SL_PAD_SD1_DAT3__SD1_DATA3	0x170b9
+			MX6SL_PAD_SD1_DAT4__SD1_DATA4	0x170b9
+			MX6SL_PAD_SD1_DAT5__SD1_DATA5	0x170b9
+			MX6SL_PAD_SD1_DAT6__SD1_DATA6	0x170b9
+			MX6SL_PAD_SD1_DAT7__SD1_DATA7	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_CMD__SD1_CMD	0x170f9
+			MX6SL_PAD_SD1_CLK__SD1_CLK	0x170f9
+			MX6SL_PAD_SD1_DAT0__SD1_DATA0	0x170f9
+			MX6SL_PAD_SD1_DAT1__SD1_DATA1	0x170f9
+			MX6SL_PAD_SD1_DAT2__SD1_DATA2	0x170f9
+			MX6SL_PAD_SD1_DAT3__SD1_DATA3	0x170f9
+			MX6SL_PAD_SD1_DAT4__SD1_DATA4	0x170b9
+			MX6SL_PAD_SD1_DAT5__SD1_DATA5	0x170b9
+			MX6SL_PAD_SD1_DAT6__SD1_DATA6	0x170b9
+			MX6SL_PAD_SD1_DAT7__SD1_DATA7	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_sleep: usdhc1-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_CMD__SD1_CMD	0x10059
+			MX6SL_PAD_SD1_CLK__SD1_CLK	0x10059
+			MX6SL_PAD_SD1_DAT0__SD1_DATA0	0x10059
+			MX6SL_PAD_SD1_DAT1__SD1_DATA1	0x10059
+			MX6SL_PAD_SD1_DAT2__SD1_DATA2	0x10059
+			MX6SL_PAD_SD1_DAT3__SD1_DATA3	0x10059
+			MX6SL_PAD_SD1_DAT4__SD1_DATA4	0x10059
+			MX6SL_PAD_SD1_DAT5__SD1_DATA5	0x10059
+			MX6SL_PAD_SD1_DAT6__SD1_DATA6	0x10059
+			MX6SL_PAD_SD1_DAT7__SD1_DATA7	0x10059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x11059
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x11059
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x11059
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x11059
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x11059
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x11059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170b9
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170b9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170b9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170b9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170b9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170f9
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170f9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170f9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170f9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170f9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc3_sleep: usdhc3-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__GPIO5_IO21	0x100c1
+			MX6SL_PAD_SD3_CLK__GPIO5_IO18	0x100c1
+			MX6SL_PAD_SD3_DAT0__GPIO5_IO19	0x100c1
+			MX6SL_PAD_SD3_DAT1__GPIO5_IO20	0x100c1
+			MX6SL_PAD_SD3_DAT2__GPIO5_IO16	0x100c1
+			MX6SL_PAD_SD3_DAT3__GPIO5_IO17	0x100c1
+		>;
+	};
+
+	pinctrl_wifi_power: wifi-powergrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_DAT6__GPIO4_IO29	0x10059	 /* WIFI_3V3_ON */
+		>;
+	};
+
+	pinctrl_wifi_reset: wifi-resetgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_DAT7__GPIO5_IO00	0x10059	/* WIFI_RST */
+		>;
+	};
+};
+
+&leds {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_led>;
+};
+
+&lm3630a {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lm3630a_bl_gpio>;
+};
+
+&reg_wifi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wifi_power>;
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&dcdc2_reg>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&dcdc2_reg>;
+};
+
+&reg_arm {
+	vin-supply = <&dcdc3_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&dcdc1_reg>;
+};
+
+&reg_pu {
+	vin-supply = <&dcdc1_reg>;
+};
+
+&ricoh619 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ricoh_gpio>;
+};
+
+&sy7636 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sy7636_gpio>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc1_sleep>;
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc3_sleep>;
+};
+
+&wifi_pwrseq {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wifi_reset>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl-warp.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-warp.dts
new file mode 100644
index 000000000000..a5d48c382314
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6sl-warp.dts
@@ -0,0 +1,232 @@
+/*
+ * Copyright 2014, 2015 O.S. Systems Software LTDA.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6sl.dtsi"
+
+/ {
+	model = "Revotics WaRP Board";
+	compatible = "revotics,imx6sl-warp", "fsl,imx6sl";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	usdhc3_pwrseq: usdhc3_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>, 	/* WL_REG_ON */
+			      <&gpio4 7 GPIO_ACTIVE_LOW>, 	/* WL_HOSTWAKE */
+			      <&gpio3 25 GPIO_ACTIVE_LOW>, 	/* BT_REG_ON */
+			      <&gpio3 27 GPIO_ACTIVE_LOW>,	/* BT_HOSTWAKE */
+			      <&gpio4 4 GPIO_ACTIVE_LOW>, 	/* BT_WAKE */
+			      <&gpio4 6 GPIO_ACTIVE_LOW>; 	/* BT_RST_N */
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "peripheral";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <4>;
+	non-removable;
+	keep-power-in-suspend;
+	wakeup-source;
+	mmc-pwrseq = <&usdhc3_pwrseq>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6SL_PAD_UART1_RXD__UART1_RX_DATA	0x41b0b1
+			MX6SL_PAD_UART1_TXD__UART1_TX_DATA	0x41b0b1
+		>;
+	};
+
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6SL_PAD_AUD_RXC__UART3_RX_DATA	0x41b0b1
+			MX6SL_PAD_AUD_RXC__UART3_TX_DATA	0x41b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6SL_PAD_ECSPI1_SCLK__UART5_RX_DATA	0x41b0b1
+			MX6SL_PAD_ECSPI1_MOSI__UART5_TX_DATA	0x41b0b1
+			MX6SL_PAD_ECSPI1_MISO__UART5_RTS_B	0x4130b1
+			MX6SL_PAD_ECSPI1_SS0__UART5_CTS_B	0x4130b1
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x417059
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x410059
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x417059
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x417059
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x417059
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x417059
+			MX6SL_PAD_SD2_DAT4__SD2_DATA4		0x417059
+			MX6SL_PAD_SD2_DAT5__SD2_DATA5		0x417059
+			MX6SL_PAD_SD2_DAT6__SD2_DATA6		0x417059
+			MX6SL_PAD_SD2_DAT7__SD2_DATA7		0x417059
+			MX6SL_PAD_SD2_RST__SD2_RESET		0x417059
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x4170b9
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x4100b9
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x4170b9
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x4170b9
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x4170b9
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x4170b9
+			MX6SL_PAD_SD2_DAT4__SD2_DATA4		0x4170b9
+			MX6SL_PAD_SD2_DAT5__SD2_DATA5		0x4170b9
+			MX6SL_PAD_SD2_DAT6__SD2_DATA6		0x4170b9
+			MX6SL_PAD_SD2_DAT7__SD2_DATA7		0x4170b9
+			MX6SL_PAD_SD2_RST__SD2_RESET		0x4170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x4170f9
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x4100f9
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x4170f9
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x4170f9
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x4170f9
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x4170f9
+			MX6SL_PAD_SD2_DAT4__SD2_DATA4		0x4170f9
+			MX6SL_PAD_SD2_DAT5__SD2_DATA5		0x4170f9
+			MX6SL_PAD_SD2_DAT6__SD2_DATA6		0x4170f9
+			MX6SL_PAD_SD2_DAT7__SD2_DATA7		0x4170f9
+			MX6SL_PAD_SD2_RST__SD2_RESET		0x4170f9
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD		0x417059
+			MX6SL_PAD_SD3_CLK__SD3_CLK		0x410059
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x417059
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x417059
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x417059
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x417059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD		0x4170b9
+			MX6SL_PAD_SD3_CLK__SD3_CLK		0x4100b9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x4170b9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x4170b9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x4170b9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x4170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD		0x4170f9
+			MX6SL_PAD_SD3_CLK__SD3_CLK		0x4100f9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x4170f9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x4170f9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x4170f9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x4170f9
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sl.dtsi
index 997b96c1c47b..7381fb7f8912 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6sl.dtsi
@@ -50,23 +50,21 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu0: cpu@0 {
 			compatible = "arm,cortex-a9";
 			device_type = "cpu";
 			reg = <0x0>;
 			next-level-cache = <&L2>;
-			operating-points = <
+			operating-points =
 				/* kHz    uV */
-				996000  1275000
-				792000  1175000
-				396000  975000
-			>;
-			fsl,soc-operating-points = <
-				/* ARM kHz      SOC-PU uV */
-				996000          1225000
-				792000          1175000
-				396000          1175000
-			>;
+				<996000  1275000>,
+				<792000  1175000>,
+				<396000  975000>;
+			fsl,soc-operating-points =
+				/* ARM kHz	SOC-PU uV */
+				<996000		1225000>,
+				<792000		1175000>,
+				<396000		1175000>;
 			clock-latency = <61036>; /* two CLK32 periods */
 			#cooling-cells = <2>;
 			clocks = <&clks IMX6SL_CLK_ARM>, <&clks IMX6SL_CLK_PLL2_PFD2>,
@@ -117,6 +115,9 @@
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6SL_CLK_OCRAM>;
 		};
 
@@ -224,7 +225,7 @@
 
 				uart5: serial@2018000 {
 					compatible = "fsl,imx6sl-uart",
-						   "fsl,imx6q-uart", "fsl,imx21-uart";
+						     "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02018000 0x4000>;
 					interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SL_CLK_UART>,
@@ -237,7 +238,7 @@
 
 				uart1: serial@2020000 {
 					compatible = "fsl,imx6sl-uart",
-						   "fsl,imx6q-uart", "fsl,imx21-uart";
+						     "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02020000 0x4000>;
 					interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SL_CLK_UART>,
@@ -250,7 +251,7 @@
 
 				uart2: serial@2024000 {
 					compatible = "fsl,imx6sl-uart",
-						   "fsl,imx6q-uart", "fsl,imx21-uart";
+						     "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02024000 0x4000>;
 					interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SL_CLK_UART>,
@@ -311,7 +312,7 @@
 
 				uart3: serial@2034000 {
 					compatible = "fsl,imx6sl-uart",
-						   "fsl,imx6q-uart", "fsl,imx21-uart";
+						     "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02034000 0x4000>;
 					interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SL_CLK_UART>,
@@ -324,7 +325,7 @@
 
 				uart4: serial@2038000 {
 					compatible = "fsl,imx6sl-uart",
-						   "fsl,imx6q-uart", "fsl,imx21-uart";
+						     "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02038000 0x4000>;
 					interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SL_CLK_UART>,
@@ -377,7 +378,7 @@
 			};
 
 			gpt: timer@2098000 {
-				compatible = "fsl,imx6sl-gpt";
+				compatible = "fsl,imx6sl-gpt", "fsl,imx6dl-gpt";
 				reg = <0x02098000 0x4000>;
 				interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SL_CLK_GPT>,
@@ -545,8 +546,8 @@
 				reg_vdd3p0: regulator-3p0 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vdd3p0";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <3150000>;
+					regulator-min-microvolt = <2625000>;
+					regulator-max-microvolt = <3400000>;
 					regulator-always-on;
 					anatop-reg-offset = <0x120>;
 					anatop-vol-bit-shift = <8>;
@@ -630,6 +631,7 @@
 					nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
 					nvmem-cell-names = "calib", "temp_grade";
 					clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>;
+					#thermal-sensor-cells = <0>;
 				};
 			};
 
@@ -638,6 +640,7 @@
 				reg = <0x020c9000 0x1000>;
 				interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SL_CLK_USBPHY1>;
+				phy-3p0-supply = <&reg_vdd3p0>;
 				fsl,anatop = <&anatop>;
 			};
 
@@ -646,6 +649,7 @@
 				reg = <0x020ca000 0x1000>;
 				interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SL_CLK_USBPHY2>;
+				phy-3p0-supply = <&reg_vdd3p0>;
 				fsl,anatop = <&anatop>;
 			};
 
@@ -713,7 +717,7 @@
 						#power-domain-cells = <0>;
 						power-supply = <&reg_pu>;
 						clocks = <&clks IMX6SL_CLK_GPU2D_OVG>,
-						         <&clks IMX6SL_CLK_GPU2D_PODF>;
+							 <&clks IMX6SL_CLK_GPU2D_PODF>;
 					};
 
 					pd_disp: power-domain@2 {
@@ -749,7 +753,7 @@
 				interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			sdma: sdma@20ec000 {
+			sdma: dma-controller@20ec000 {
 				compatible = "fsl,imx6sl-sdma", "fsl,imx6q-sdma";
 				reg = <0x020ec000 0x4000>;
 				interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
@@ -858,7 +862,7 @@
 			};
 
 			usdhc1: mmc@2190000 {
-				compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
+				compatible = "fsl,imx6sl-usdhc";
 				reg = <0x02190000 0x4000>;
 				interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SL_CLK_USDHC1>,
@@ -870,7 +874,7 @@
 			};
 
 			usdhc2: mmc@2194000 {
-				compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
+				compatible = "fsl,imx6sl-usdhc";
 				reg = <0x02194000 0x4000>;
 				interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SL_CLK_USDHC2>,
@@ -882,7 +886,7 @@
 			};
 
 			usdhc3: mmc@2198000 {
-				compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
+				compatible = "fsl,imx6sl-usdhc";
 				reg = <0x02198000 0x4000>;
 				interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SL_CLK_USDHC3>,
@@ -894,7 +898,7 @@
 			};
 
 			usdhc4: mmc@219c000 {
-				compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
+				compatible = "fsl,imx6sl-usdhc";
 				reg = <0x0219c000 0x4000>;
 				interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SL_CLK_USDHC4>,
@@ -948,7 +952,7 @@
 				clocks = <&clks IMX6SL_CLK_DUMMY>;
 			};
 
-			weim: weim@21b8000 {
+			weim: memory-controller@21b8000 {
 				#address-cells = <2>;
 				#size-cells = <1>;
 				reg = <0x021b8000 0x4000>;
diff --git a/arch/arm/boot/dts/imx6sll-evk.dts b/arch/arm/boot/dts/nxp/imx/imx6sll-evk.dts
index 32b3d82fec53..814401486792 100644
--- a/arch/arm/boot/dts/imx6sll-evk.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6sll-evk.dts
@@ -26,7 +26,7 @@
 
 	backlight_display: backlight-display {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 		status = "okay";
@@ -37,7 +37,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_led>;
 
-		user {
+		led-user {
 			label = "debug";
 			gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
@@ -109,6 +109,14 @@
 		enable-active-high;
 	};
 
+	reg_sd2_vmmc: regulator-sd2-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "eMMC-VCCQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+	};
+
 	reg_sd3_vmmc: regulator-sd3-vmmc {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -149,7 +157,7 @@
 			"IN3R", "AMIC";
 		mux-int-port = <2>;
 		mux-ext-port = <3>;
-		hp-det-gpio = <&gpio4 24 GPIO_ACTIVE_LOW>;
+		hp-det-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
 	};
 };
 
@@ -306,10 +314,8 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
 };
 
 &snvs_poweroff {
@@ -343,6 +349,17 @@
 	status = "okay";
 };
 
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	vqmmc-supply = <&reg_sd2_vmmc>;
+	status = "okay";
+};
+
 &usbotg1 {
 	vbus-supply = <&reg_usb_otg1_vbus>;
 	pinctrl-names = "default";
@@ -444,7 +461,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
 		fsl,pins = <
 			MX6SLL_PAD_SD1_CMD__SD1_CMD	0x170b9
 			MX6SLL_PAD_SD1_CLK__SD1_CLK	0x130b9
@@ -455,7 +472,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
 		fsl,pins = <
 			MX6SLL_PAD_SD1_CMD__SD1_CMD	0x170f9
 			MX6SLL_PAD_SD1_CLK__SD1_CLK	0x130f9
@@ -466,6 +483,54 @@
 		>;
 	};
 
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6SLL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6SLL_PAD_SD2_CLK__SD2_CLK		0x13059
+			MX6SLL_PAD_SD2_DATA0__SD2_DATA0		0x17059
+			MX6SLL_PAD_SD2_DATA1__SD2_DATA1		0x17059
+			MX6SLL_PAD_SD2_DATA2__SD2_DATA2		0x17059
+			MX6SLL_PAD_SD2_DATA3__SD2_DATA3		0x17059
+			MX6SLL_PAD_SD2_DATA4__SD2_DATA4		0x17059
+			MX6SLL_PAD_SD2_DATA5__SD2_DATA5		0x17059
+			MX6SLL_PAD_SD2_DATA6__SD2_DATA6		0x17059
+			MX6SLL_PAD_SD2_DATA7__SD2_DATA7		0x17059
+			MX6SLL_PAD_GPIO4_IO21__SD2_STROBE	0x13059
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6SLL_PAD_SD2_CLK__SD2_CLK		0x130b9
+			MX6SLL_PAD_SD2_DATA0__SD2_DATA0		0x170b9
+			MX6SLL_PAD_SD2_DATA1__SD2_DATA1		0x170b9
+			MX6SLL_PAD_SD2_DATA2__SD2_DATA2		0x170b9
+			MX6SLL_PAD_SD2_DATA3__SD2_DATA3		0x170b9
+			MX6SLL_PAD_SD2_DATA4__SD2_DATA4		0x170b9
+			MX6SLL_PAD_SD2_DATA5__SD2_DATA5		0x170b9
+			MX6SLL_PAD_SD2_DATA6__SD2_DATA6		0x170b9
+			MX6SLL_PAD_SD2_DATA7__SD2_DATA7		0x170b9
+			MX6SLL_PAD_GPIO4_IO21__SD2_STROBE	0x130b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD2_CMD__SD2_CMD		0x170f9
+			MX6SLL_PAD_SD2_CLK__SD2_CLK		0x130f9
+			MX6SLL_PAD_SD2_DATA0__SD2_DATA0		0x170f9
+			MX6SLL_PAD_SD2_DATA1__SD2_DATA1		0x170f9
+			MX6SLL_PAD_SD2_DATA2__SD2_DATA2		0x170f9
+			MX6SLL_PAD_SD2_DATA3__SD2_DATA3		0x170f9
+			MX6SLL_PAD_SD2_DATA4__SD2_DATA4		0x170f9
+			MX6SLL_PAD_SD2_DATA5__SD2_DATA5		0x170f9
+			MX6SLL_PAD_SD2_DATA6__SD2_DATA6		0x170f9
+			MX6SLL_PAD_SD2_DATA7__SD2_DATA7		0x170f9
+			MX6SLL_PAD_GPIO4_IO21__SD2_STROBE	0x130f9
+		>;
+	};
+
 	pinctrl_usbotg1: usbotg1grp {
 		fsl,pins = <
 			MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059
@@ -484,7 +549,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
 		fsl,pins = <
 			MX6SLL_PAD_SD3_CMD__SD3_CMD		0x170a1
 			MX6SLL_PAD_SD3_CLK__SD3_CLK		0x130a1
@@ -496,7 +561,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
 		fsl,pins = <
 			MX6SLL_PAD_SD3_CMD__SD3_CMD		0x170e9
 			MX6SLL_PAD_SD3_CLK__SD3_CLK		0x130f9
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-a.dts b/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-a.dts
new file mode 100644
index 000000000000..33756d6de7aa
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-a.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0)
+/*
+ * Device tree for the Kobo Clara 2E rev A ebook reader
+ *
+ * Name on mainboard is: 37NB-E60K2M+4A2
+ * Serials start with: E60K2M (a number also seen in
+ * vendor kernel sources)
+ *
+ * Copyright 2024 Andreas Kemnade
+ */
+
+/dts-v1/;
+
+#include "imx6sll-kobo-clara2e-common.dtsi"
+
+/ {
+	model = "Kobo Clara 2E";
+	compatible = "kobo,clara2e-b", "kobo,clara2e", "fsl,imx6sll";
+};
+
+&i2c2 {
+	/* EPD PMIC SY7636 at 0x62 */
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-b.dts b/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-b.dts
new file mode 100644
index 000000000000..f81aeacf5142
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-b.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0)
+/*
+ * Device tree for the Kobo Clara 2E rev B ebook reader
+ *
+ * Name on mainboard is: 37NB-E60K2M+4B0
+ * Serials start with: E60K2M (a number also seen in
+ * vendor kernel sources)
+ *
+ * Copyright 2024 Andreas Kemnade
+ */
+
+/dts-v1/;
+
+#include "imx6sll-kobo-clara2e-common.dtsi"
+
+/ {
+	model = "Kobo Clara 2E";
+	compatible = "kobo,clara2e-b", "kobo,clara2e", "fsl,imx6sll";
+};
+
+&i2c2 {
+	/* EPD PMIC JD9930 at 0x18 */
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-common.dtsi
new file mode 100644
index 000000000000..6f2deb366e02
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clara2e-common.dtsi
@@ -0,0 +1,511 @@
+// SPDX-License-Identifier: (GPL-2.0)
+/*
+ * Common part for Kobo Clara 2e device tree
+ * Copyright 2024 Andreas Kemnade
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "imx6sll.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &usdhc2;
+		mmc1 = &usdhc3;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-cover {
+			label = "Cover";
+			gpios = <&gpio4 23 GPIO_ACTIVE_LOW>;
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		led {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio4 17 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reg_wifi: regulator-wifi {
+		compatible = "regulator-fixed";
+		regulator-name = "SD3_SPWR";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6SLL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <393216000>;
+};
+
+&cpu0 {
+	arm-supply = <&buck1>;
+	soc-supply = <&buck2>;
+};
+
+&i2c1 {
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_sleep>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	/* backlight aw99703 at 0x36 */
+};
+
+&i2c2 {
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_sleep>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	/* backlight aw99703 at 0x36 */
+
+	touchscreen@38 {
+		compatible = "focaltech,ft5426";
+		reg = <0x38>;
+		pinctrl-names = "default", "suspend";
+		pinctrl-0 = <&pinctrl_touch_gpio>;
+		pinctrl-1 = <&pinctrl_touch_gpio_sleep>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio4 18 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <1072>;
+		touchscreen-size-y = <1448>;
+		touchscreen-swapped-x-y;
+	};
+};
+
+&i2c3 {
+	/* Bus seems to be in bad state after boot, allow full recovery */
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	sda-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	pmic@4b {
+		compatible = "rohm,bd71879", "rohm,bd71828";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bd71828>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+		system-power-controller;
+		clocks = <&clks 0>;
+		#clock-cells = <0>;
+		clock-output-names = "bd71828-32k-out";
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-reserved-ranges = <0 1>, <2 1>;
+
+		/* charge sense resistor is 30 milli-ohm */
+
+		regulators {
+			LDO1 {
+				name = "LDO1";
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			LDO2 {
+				name = "LDO2";
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			LDO3 {
+				name = "LDO3";
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo4: LDO4 {
+				name = "LDO4";
+				regulator-name = "ldo4";
+				regulator-always-on;
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+			};
+
+			LDO5 {
+				name = "LDO5";
+				regulator-name = "ldo5";
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			LDO6 {
+				name = "LDO6";
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			LDO7 {
+				name = "LDO7";
+				regulator-name = "ldo7";
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+			};
+
+			buck1: BUCK1 {
+				name = "BUCK1";
+				regulator-name = "buck1";
+				regulator-always-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+			};
+
+			buck2: BUCK2 {
+				name = "BUCK2";
+				regulator-name = "buck2";
+				regulator-always-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-boot-on;
+			};
+
+			BUCK3 {
+				name = "BUCK3";
+				regulator-name = "buck3";
+				regulator-always-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			BUCK4 {
+				name = "BUCK4";
+				regulator-name = "buck4";
+				regulator-always-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-boot-on;
+			};
+
+			BUCK5 {
+				name = "BUCK5";
+				regulator-name = "buck5";
+				regulator-always-on;
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+			};
+
+			BUCK6 {
+				name = "BUCK6";
+				regulator-name = "buck6";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2000000>;
+			};
+
+			BUCK7 {
+				name = "BUCK7";
+				regulator-name = "buck7";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2000000>;
+			};
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_bd71828: bd71828-gpiogrp {
+		fsl,pins = <
+			MX6SLL_PAD_KEY_COL0__GPIO3_IO24		0x1b8b1
+			MX6SLL_PAD_GPIO4_IO19__GPIO4_IO19	0x1b8b1
+		>;
+	};
+
+	pinctrl_gpio_keys: gpio-keysgrp {
+		fsl,pins = <
+			MX6SLL_PAD_GPIO4_IO25__GPIO4_IO25	0x17059	/* PWR_SW */
+			MX6SLL_PAD_GPIO4_IO23__GPIO4_IO23	0x17059	/* HALL_EN */
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6SLL_PAD_I2C1_SCL__I2C1_SCL	0x4001f8b1
+			MX6SLL_PAD_I2C1_SDA__I2C1_SDA	0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c1_sleep: i2c1-sleepgrp {
+		fsl,pins = <
+			MX6SLL_PAD_I2C1_SCL__I2C1_SCL	0x400108b1
+			MX6SLL_PAD_I2C1_SDA__I2C1_SDA	0x400108b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6SLL_PAD_I2C2_SCL__I2C2_SCL	0x4001f8b1
+			MX6SLL_PAD_I2C2_SDA__I2C2_SDA	0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c2_sleep: i2c2-sleepgrp {
+		fsl,pins = <
+			MX6SLL_PAD_I2C2_SCL__I2C2_SCL	0x400108b1
+			MX6SLL_PAD_I2C2_SDA__I2C2_SDA	0x400108b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6SLL_PAD_REF_CLK_24M__I2C3_SCL 0x4001f8b1
+			MX6SLL_PAD_REF_CLK_32K__I2C3_SDA 0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3-gpiogrp {
+		fsl,pins = <
+			MX6SLL_PAD_REF_CLK_24M__GPIO3_IO21 0x4001f8b1
+			MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 0x4001f8b1
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX6SLL_PAD_GPIO4_IO17__GPIO4_IO17 0x10059
+		>;
+	};
+
+	pinctrl_touch_gpio: touch-gpiogrp {
+		fsl,pins = <
+			MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24	0x17059 /* TP_INT */
+			MX6SLL_PAD_GPIO4_IO18__GPIO4_IO18	0x10059 /* TP_RST */
+		>;
+	};
+
+	pinctrl_touch_gpio_sleep: touch-gpio-sleepgrp {
+		fsl,pins = <
+			MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24	0x10059 /* TP_INT */
+			MX6SLL_PAD_GPIO4_IO18__GPIO4_IO18	0x10059 /* TP_RST */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1
+			MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6SLL_PAD_LCD_ENABLE__UART2_DCE_RX	0x41b0b1
+			MX6SLL_PAD_LCD_HSYNC__UART2_DCE_TX	0x41b0b1
+			MX6SLL_PAD_LCD_VSYNC__UART2_DCE_RTS	0x41b0b1
+			MX6SLL_PAD_LCD_RESET__UART2_DCE_CTS	0x41b0b1
+		>;
+	};
+
+	pinctrl_uart2_sleep: uart2-sleepgrp {
+		fsl,pins = <
+			MX6SLL_PAD_LCD_ENABLE__GPIO2_IO16	0x10059
+			MX6SLL_PAD_LCD_HSYNC__GPIO2_IO17	0x10059
+			MX6SLL_PAD_LCD_VSYNC__GPIO2_IO18	0x10059
+			MX6SLL_PAD_LCD_RESET__GPIO2_IO19	0x10059
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6SLL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6SLL_PAD_SD2_CLK__SD2_CLK		0x13059
+			MX6SLL_PAD_SD2_DATA0__SD2_DATA0		0x17059
+			MX6SLL_PAD_SD2_DATA1__SD2_DATA1		0x17059
+			MX6SLL_PAD_SD2_DATA2__SD2_DATA2		0x17059
+			MX6SLL_PAD_SD2_DATA3__SD2_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6SLL_PAD_SD2_CLK__SD2_CLK		0x130b9
+			MX6SLL_PAD_SD2_DATA0__SD2_DATA0		0x170b9
+			MX6SLL_PAD_SD2_DATA1__SD2_DATA1		0x170b9
+			MX6SLL_PAD_SD2_DATA2__SD2_DATA2		0x170b9
+			MX6SLL_PAD_SD2_DATA3__SD2_DATA3		0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD2_CMD__SD2_CMD		0x170f9
+			MX6SLL_PAD_SD2_CLK__SD2_CLK		0x130f9
+			MX6SLL_PAD_SD2_DATA0__SD2_DATA0		0x170f9
+			MX6SLL_PAD_SD2_DATA1__SD2_DATA1		0x170f9
+			MX6SLL_PAD_SD2_DATA2__SD2_DATA2		0x170f9
+			MX6SLL_PAD_SD2_DATA3__SD2_DATA3		0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2_sleep: usdhc2-sleepgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD2_CMD__GPIO5_IO04		0x100f9
+			MX6SLL_PAD_SD2_CLK__GPIO5_IO05		0x100f9
+			MX6SLL_PAD_SD2_DATA0__GPIO5_IO01	0x100f9
+			MX6SLL_PAD_SD2_DATA1__GPIO4_IO30	0x100f9
+			MX6SLL_PAD_SD2_DATA2__GPIO5_IO03	0x100f9
+			MX6SLL_PAD_SD2_DATA3__GPIO4_IO28	0x100f9
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6SLL_PAD_SD3_CMD__SD3_CMD	0x11059
+			MX6SLL_PAD_SD3_CLK__SD3_CLK	0x11059
+			MX6SLL_PAD_SD3_DATA0__SD3_DATA0	0x11059
+			MX6SLL_PAD_SD3_DATA1__SD3_DATA1	0x11059
+			MX6SLL_PAD_SD3_DATA2__SD3_DATA2	0x11059
+			MX6SLL_PAD_SD3_DATA3__SD3_DATA3	0x11059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD3_CMD__SD3_CMD	0x170b9
+			MX6SLL_PAD_SD3_CLK__SD3_CLK	0x170b9
+			MX6SLL_PAD_SD3_DATA0__SD3_DATA0	0x170b9
+			MX6SLL_PAD_SD3_DATA1__SD3_DATA1	0x170b9
+			MX6SLL_PAD_SD3_DATA2__SD3_DATA2	0x170b9
+			MX6SLL_PAD_SD3_DATA3__SD3_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD3_CMD__SD3_CMD	0x170f9
+			MX6SLL_PAD_SD3_CLK__SD3_CLK	0x170f9
+			MX6SLL_PAD_SD3_DATA0__SD3_DATA0	0x170f9
+			MX6SLL_PAD_SD3_DATA1__SD3_DATA1	0x170f9
+			MX6SLL_PAD_SD3_DATA2__SD3_DATA2	0x170f9
+			MX6SLL_PAD_SD3_DATA3__SD3_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc3_sleep: usdhc3-sleepgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD3_CMD__GPIO5_IO21	0x100c1
+			MX6SLL_PAD_SD3_CLK__GPIO5_IO18	0x100c1
+			MX6SLL_PAD_SD3_DATA0__GPIO5_IO19	0x100c1
+			MX6SLL_PAD_SD3_DATA1__GPIO5_IO20	0x100c1
+			MX6SLL_PAD_SD3_DATA2__GPIO5_IO16	0x100c1
+			MX6SLL_PAD_SD3_DATA3__GPIO5_IO17	0x100c1
+		>;
+	};
+
+	pinctrl_wifi_power: wifi-powergrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD2_DATA6__GPIO4_IO29	0x10059
+		>;
+	};
+};
+
+&snvs_rtc {
+	/* we are using the rtc in the pmic, not disabled in imx6sll.dtsi */
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_uart2>;
+	pinctrl-1 = <&pinctrl_uart2_sleep>;
+	status = "okay";
+
+	/* requires LDO4 + power enable gpio */
+	bluetooth {
+		compatible = "nxp,88w8987-bt";
+		fw-init-baudrate = <1500000>;
+	};
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	disable-over-current;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc2_sleep>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc3_sleep>;
+	/* card requires also ldo4 */
+	vmmc-supply = <&reg_wifi>;
+	cap-power-off-card;
+	non-removable;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts b/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clarahd.dts
index 90b32f5eb529..18c9ac8f7560 100644
--- a/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clarahd.dts
@@ -62,6 +62,13 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
 
+	pinctrl_cyttsp5_gpio: cyttsp5-gpiogrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD1_DATA3__GPIO5_IO06                0x17059 /* TP_INT */
+			MX6SLL_PAD_SD1_DATA2__GPIO5_IO13                0x10059 /* TP_RST */
+		>;
+	};
+
 	pinctrl_gpio_keys: gpio-keysgrp {
 		fsl,pins = <
 			MX6SLL_PAD_SD1_DATA1__GPIO5_IO08	0x17059	/* PWR_SW */
@@ -114,7 +121,7 @@
 		>;
 	};
 
-	pinctrl_i2c1_sleep: i2c1grp-sleep {
+	pinctrl_i2c1_sleep: i2c1sleep-grp {
 		fsl,pins = <
 			MX6SLL_PAD_I2C1_SCL__I2C1_SCL	0x400108b1
 			MX6SLL_PAD_I2C1_SDA__I2C1_SDA	0x400108b1
@@ -128,7 +135,7 @@
 		>;
 	};
 
-	pinctrl_i2c2_sleep: i2c2grp-sleep {
+	pinctrl_i2c2_sleep: i2c2sleep-grp {
 		fsl,pins = <
 			MX6SLL_PAD_I2C2_SCL__I2C2_SCL	0x400108b1
 			MX6SLL_PAD_I2C2_SDA__I2C2_SDA	0x400108b1
@@ -193,7 +200,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
 		fsl,pins = <
 			MX6SLL_PAD_SD2_CMD__SD2_CMD		0x170b9
 			MX6SLL_PAD_SD2_CLK__SD2_CLK		0x130b9
@@ -204,7 +211,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_200mhz: usdhc2grp-200mhz {
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
 		fsl,pins = <
 			MX6SLL_PAD_SD2_CMD__SD2_CMD		0x170f9
 			MX6SLL_PAD_SD2_CLK__SD2_CLK		0x130f9
@@ -215,7 +222,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_sleep: usdhc2grp-sleep {
+	pinctrl_usdhc2_sleep: usdhc2sleep-grp {
 		fsl,pins = <
 			MX6SLL_PAD_SD2_CMD__GPIO5_IO04		0x100f9
 			MX6SLL_PAD_SD2_CLK__GPIO5_IO05		0x100f9
@@ -237,7 +244,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
 		fsl,pins = <
 			MX6SLL_PAD_SD3_CMD__SD3_CMD	0x170b9
 			MX6SLL_PAD_SD3_CLK__SD3_CLK	0x170b9
@@ -248,7 +255,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
 		fsl,pins = <
 			MX6SLL_PAD_SD3_CMD__SD3_CMD	0x170f9
 			MX6SLL_PAD_SD3_CLK__SD3_CLK	0x170f9
@@ -259,7 +266,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_sleep: usdhc3grp-sleep {
+	pinctrl_usdhc3_sleep: usdhc3sleep-grp {
 		fsl,pins = <
 			MX6SLL_PAD_SD3_CMD__GPIO5_IO21	0x100c1
 			MX6SLL_PAD_SD3_CLK__GPIO5_IO18	0x100c1
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-librah2o.dts b/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-librah2o.dts
new file mode 100644
index 000000000000..19bbe60331b3
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-librah2o.dts
@@ -0,0 +1,370 @@
+// SPDX-License-Identifier: (GPL-2.0)
+/*
+ * Device tree for the Kobo Libra H2O ebook reader
+ *
+ * Name on mainboard is: 37NB-E70K0M+6A3
+ * Serials start with: E70K02 (a number also seen in
+ * vendor kernel sources)
+ *
+ * This mainboard seems to be equipped with different SoCs.
+ * In the Kobo Libra H2O ebook reader it is an i.MX6SLL
+ *
+ * Copyright 2021 Andreas Kemnade
+ * based on works
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6sll.dtsi"
+#include "e70k02.dtsi"
+
+/ {
+	model = "Kobo Libra H2O";
+	compatible = "kobo,librah2o", "fsl,imx6sll";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6SLL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <393216000>;
+};
+
+&cpu0 {
+	arm-supply = <&dcdc3_reg>;
+	soc-supply = <&dcdc1_reg>;
+};
+
+&epd_pmic_supply {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_epd_pmic_supply>;
+};
+
+&gpio_keys {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_keys>;
+};
+
+&i2c1 {
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_sleep>;
+};
+
+&i2c2 {
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_sleep>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_cyttsp5_gpio: cyttsp5-gpiogrp {
+		fsl,pins = <
+			MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24	0x17059 /* TP_INT */
+			MX6SLL_PAD_GPIO4_IO18__GPIO4_IO18	0x10059 /* TP_RST */
+		>;
+	};
+
+	pinctrl_epd_pmic_supply: epd-pmic-supplygrp {
+		fsl,pins = <
+			MX6SLL_PAD_EPDC_PWR_WAKE__GPIO2_IO14    0x40010059
+		>;
+	};
+
+	pinctrl_gpio_keys: gpio-keysgrp {
+		fsl,pins = <
+			MX6SLL_PAD_GPIO4_IO25__GPIO4_IO25	0x17059	/* PWR_SW */
+			MX6SLL_PAD_GPIO4_IO23__GPIO4_IO23	0x17059	/* HALL_EN */
+			MX6SLL_PAD_KEY_COL4__GPIO4_IO00		0x17059	/* PAGE_UP */
+			MX6SLL_PAD_KEY_COL5__GPIO4_IO02		0x17059	/* PAGE_DOWN */
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6SLL_PAD_LCD_DATA01__GPIO2_IO21	0x79
+			MX6SLL_PAD_LCD_DATA04__GPIO2_IO24	0x79
+			MX6SLL_PAD_LCD_DATA05__GPIO2_IO25	0x79
+			MX6SLL_PAD_LCD_DATA06__GPIO2_IO26	0x79
+			MX6SLL_PAD_LCD_DATA07__GPIO2_IO27	0x79
+			MX6SLL_PAD_LCD_DATA08__GPIO2_IO28	0x79
+			MX6SLL_PAD_LCD_DATA09__GPIO2_IO29	0x79
+			MX6SLL_PAD_LCD_DATA10__GPIO2_IO30	0x79
+			MX6SLL_PAD_LCD_DATA11__GPIO2_IO31	0x79
+			MX6SLL_PAD_LCD_DATA12__GPIO3_IO00	0x79
+			MX6SLL_PAD_LCD_DATA13__GPIO3_IO01	0x79
+			MX6SLL_PAD_LCD_DATA14__GPIO3_IO02	0x79
+			MX6SLL_PAD_LCD_DATA15__GPIO3_IO03	0x79
+			MX6SLL_PAD_LCD_DATA16__GPIO3_IO04	0x79
+			MX6SLL_PAD_LCD_DATA17__GPIO3_IO05	0x79
+			MX6SLL_PAD_LCD_DATA18__GPIO3_IO06	0x79
+			MX6SLL_PAD_LCD_DATA19__GPIO3_IO07	0x79
+			MX6SLL_PAD_LCD_DATA20__GPIO3_IO08	0x79
+			MX6SLL_PAD_LCD_DATA21__GPIO3_IO09	0x79
+			MX6SLL_PAD_LCD_DATA22__GPIO3_IO10	0x79
+			MX6SLL_PAD_LCD_DATA23__GPIO3_IO11	0x79
+			MX6SLL_PAD_LCD_CLK__GPIO2_IO15		0x79
+			MX6SLL_PAD_LCD_ENABLE__GPIO2_IO16	0x79
+			MX6SLL_PAD_LCD_HSYNC__GPIO2_IO17	0x79
+			MX6SLL_PAD_LCD_VSYNC__GPIO2_IO18	0x79
+			MX6SLL_PAD_LCD_RESET__GPIO2_IO19	0x79
+			MX6SLL_PAD_GPIO4_IO21__GPIO4_IO21	0x79
+			MX6SLL_PAD_GPIO4_IO26__GPIO4_IO26	0x79
+			MX6SLL_PAD_KEY_COL3__GPIO3_IO30		0x79
+			MX6SLL_PAD_KEY_ROW7__GPIO4_IO07		0x79
+			MX6SLL_PAD_ECSPI2_MOSI__GPIO4_IO13	0x79
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6SLL_PAD_I2C1_SCL__I2C1_SCL   0x4001f8b1
+			MX6SLL_PAD_I2C1_SDA__I2C1_SDA   0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c1_sleep: i2c1sleep-grp {
+		fsl,pins = <
+			MX6SLL_PAD_I2C1_SCL__I2C1_SCL   0x400108b1
+			MX6SLL_PAD_I2C1_SDA__I2C1_SDA   0x400108b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6SLL_PAD_I2C2_SCL__I2C2_SCL   0x4001f8b1
+			MX6SLL_PAD_I2C2_SDA__I2C2_SDA   0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c2_sleep: i2c2sleep-grp {
+		fsl,pins = <
+			MX6SLL_PAD_I2C2_SCL__I2C2_SCL   0x400108b1
+			MX6SLL_PAD_I2C2_SDA__I2C2_SDA   0x400108b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6SLL_PAD_REF_CLK_24M__I2C3_SCL 0x4001f8b1
+			MX6SLL_PAD_REF_CLK_32K__I2C3_SDA 0x4001f8b1
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX6SLL_PAD_GPIO4_IO17__GPIO4_IO17	0x10059
+		>;
+	};
+
+	pinctrl_lm3630a_bl_gpio: lm3630a-bl-gpiogrp {
+		fsl,pins = <
+			MX6SLL_PAD_EPDC_PWR_CTRL3__GPIO2_IO10   0x10059 /* HWEN */
+		>;
+	};
+
+	pinctrl_ricoh_gpio: ricoh-gpiogrp {
+		fsl,pins = <
+			MX6SLL_PAD_GPIO4_IO20__GPIO4_IO20	0x1b8b1 /* ricoh619 chg */
+			MX6SLL_PAD_GPIO4_IO19__GPIO4_IO19	0x1b8b1 /* ricoh619 irq */
+			MX6SLL_PAD_KEY_COL2__GPIO3_IO28		0x1b8b1 /* ricoh619 bat_low_int */
+		>;
+	};
+
+	pinctrl_sy7636_gpio: sy7636-gpiogrp {
+		fsl,pins = <
+			MX6SLL_PAD_EPDC_VCOM0__GPIO2_IO03       0x40010059 /* VCOM_CTRL */
+			MX6SLL_PAD_EPDC_PWR_CTRL1__GPIO2_IO08   0x40010059 /* EN */
+			MX6SLL_PAD_EPDC_PWR_STAT__GPIO2_IO13    0x17059 /* PWR_GOOD */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1
+			MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6SLL_PAD_SD1_CMD__SD1_CMD	0x17059
+			MX6SLL_PAD_SD1_CLK__SD1_CLK	0x17059
+			MX6SLL_PAD_SD1_DATA0__SD1_DATA0	0x17059
+			MX6SLL_PAD_SD1_DATA1__SD1_DATA1	0x17059
+			MX6SLL_PAD_SD1_DATA2__SD1_DATA2	0x17059
+			MX6SLL_PAD_SD1_DATA3__SD1_DATA3	0x17059
+			MX6SLL_PAD_SD1_DATA4__SD1_DATA4	0x17059
+			MX6SLL_PAD_SD1_DATA5__SD1_DATA5	0x17059
+			MX6SLL_PAD_SD1_DATA6__SD1_DATA6	0x17059
+			MX6SLL_PAD_SD1_DATA7__SD1_DATA7	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD1_CMD__SD1_CMD	0x170b9
+			MX6SLL_PAD_SD1_CLK__SD1_CLK	0x170b9
+			MX6SLL_PAD_SD1_DATA0__SD1_DATA0	0x170b9
+			MX6SLL_PAD_SD1_DATA1__SD1_DATA1	0x170b9
+			MX6SLL_PAD_SD1_DATA2__SD1_DATA2	0x170b9
+			MX6SLL_PAD_SD1_DATA3__SD1_DATA3	0x170b9
+			MX6SLL_PAD_SD1_DATA4__SD1_DATA4	0x170b9
+			MX6SLL_PAD_SD1_DATA5__SD1_DATA5	0x170b9
+			MX6SLL_PAD_SD1_DATA6__SD1_DATA6	0x170b9
+			MX6SLL_PAD_SD1_DATA7__SD1_DATA7	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD1_CMD__SD1_CMD	0x170f9
+			MX6SLL_PAD_SD1_CLK__SD1_CLK	0x170f9
+			MX6SLL_PAD_SD1_DATA0__SD1_DATA0	0x170f9
+			MX6SLL_PAD_SD1_DATA1__SD1_DATA1	0x170f9
+			MX6SLL_PAD_SD1_DATA2__SD1_DATA2	0x170f9
+			MX6SLL_PAD_SD1_DATA3__SD1_DATA3	0x170f9
+			MX6SLL_PAD_SD1_DATA4__SD1_DATA4	0x170b9
+			MX6SLL_PAD_SD1_DATA5__SD1_DATA5	0x170b9
+			MX6SLL_PAD_SD1_DATA6__SD1_DATA6	0x170b9
+			MX6SLL_PAD_SD1_DATA7__SD1_DATA7	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_sleep: usdhc1-sleepgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD1_CMD__SD1_CMD	0x10059
+			MX6SLL_PAD_SD1_CLK__SD1_CLK	0x10059
+			MX6SLL_PAD_SD1_DATA0__SD1_DATA0	0x10059
+			MX6SLL_PAD_SD1_DATA1__SD1_DATA1	0x10059
+			MX6SLL_PAD_SD1_DATA2__SD1_DATA2	0x10059
+			MX6SLL_PAD_SD1_DATA3__SD1_DATA3	0x10059
+			MX6SLL_PAD_SD1_DATA4__SD1_DATA4	0x10059
+			MX6SLL_PAD_SD1_DATA5__SD1_DATA5	0x10059
+			MX6SLL_PAD_SD1_DATA6__SD1_DATA6	0x10059
+			MX6SLL_PAD_SD1_DATA7__SD1_DATA7	0x10059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6SLL_PAD_SD3_CMD__SD3_CMD	0x11059
+			MX6SLL_PAD_SD3_CLK__SD3_CLK	0x11059
+			MX6SLL_PAD_SD3_DATA0__SD3_DATA0	0x11059
+			MX6SLL_PAD_SD3_DATA1__SD3_DATA1	0x11059
+			MX6SLL_PAD_SD3_DATA2__SD3_DATA2	0x11059
+			MX6SLL_PAD_SD3_DATA3__SD3_DATA3	0x11059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD3_CMD__SD3_CMD	0x170b9
+			MX6SLL_PAD_SD3_CLK__SD3_CLK	0x170b9
+			MX6SLL_PAD_SD3_DATA0__SD3_DATA0	0x170b9
+			MX6SLL_PAD_SD3_DATA1__SD3_DATA1	0x170b9
+			MX6SLL_PAD_SD3_DATA2__SD3_DATA2	0x170b9
+			MX6SLL_PAD_SD3_DATA3__SD3_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD3_CMD__SD3_CMD	0x170f9
+			MX6SLL_PAD_SD3_CLK__SD3_CLK	0x170f9
+			MX6SLL_PAD_SD3_DATA0__SD3_DATA0	0x170f9
+			MX6SLL_PAD_SD3_DATA1__SD3_DATA1	0x170f9
+			MX6SLL_PAD_SD3_DATA2__SD3_DATA2	0x170f9
+			MX6SLL_PAD_SD3_DATA3__SD3_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc3_sleep: usdhc3-sleepgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD3_CMD__GPIO5_IO21	0x100c1
+			MX6SLL_PAD_SD3_CLK__GPIO5_IO18	0x100c1
+			MX6SLL_PAD_SD3_DATA0__GPIO5_IO19	0x100c1
+			MX6SLL_PAD_SD3_DATA1__GPIO5_IO20	0x100c1
+			MX6SLL_PAD_SD3_DATA2__GPIO5_IO16	0x100c1
+			MX6SLL_PAD_SD3_DATA3__GPIO5_IO17	0x100c1
+		>;
+	};
+
+	pinctrl_wifi_power: wifi-powergrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD2_DATA6__GPIO4_IO29	0x10059	 /* WIFI_3V3_ON */
+		>;
+	};
+
+	pinctrl_wifi_reset: wifi-resetgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD2_DATA7__GPIO5_IO00	0x10059	 /* WIFI_RST */
+		>;
+	};
+};
+
+&leds {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_led>;
+};
+
+&lm3630a {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lm3630a_bl_gpio>;
+};
+
+&reg_wifi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wifi_power>;
+};
+
+&ricoh619 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ricoh_gpio>;
+};
+
+&sy7636 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sy7636_gpio>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc1_sleep>;
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc3_sleep>;
+};
+
+&wifi_pwrseq {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wifi_reset>;
+};
diff --git a/arch/arm/boot/dts/imx6sll-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx6sll-pinfunc.h
index 713a346f4c89..713a346f4c89 100644
--- a/arch/arm/boot/dts/imx6sll-pinfunc.h
+++ b/arch/arm/boot/dts/nxp/imx/imx6sll-pinfunc.h
diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi
index 04f8d637a501..704870e8c10c 100644
--- a/arch/arm/boot/dts/imx6sll.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi
@@ -51,20 +51,18 @@
 			device_type = "cpu";
 			reg = <0>;
 			next-level-cache = <&L2>;
-			operating-points = <
+			operating-points =
 				/* kHz    uV */
-				996000  1275000
-				792000  1175000
-				396000  1075000
-				198000	975000
-			>;
-			fsl,soc-operating-points = <
+				<996000  1275000>,
+				<792000  1175000>,
+				<396000  1075000>,
+				<198000	  975000>;
+			fsl,soc-operating-points =
 				/* ARM kHz      SOC-PU uV */
-				996000          1175000
-				792000          1175000
-				396000          1175000
-				198000		1175000
-			>;
+				<996000         1175000>,
+				<792000         1175000>,
+				<396000         1175000>,
+				<198000		1175000>;
 			clock-latency = <61036>; /* two CLK32 periods */
 			#cooling-cells = <2>;
 			clocks = <&clks IMX6SLL_CLK_ARM>,
@@ -117,6 +115,9 @@
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 		};
 
 		intc: interrupt-controller@a01000 {
@@ -172,7 +173,7 @@
 						      "rxtx1", "rxtx2",
 						      "rxtx3", "rxtx4",
 						      "rxtx5", "rxtx6",
-						      "rxtx7", "dma";
+						      "rxtx7", "spba";
 					status = "disabled";
 				};
 
@@ -308,7 +309,7 @@
 					reg = <0x02034000 0x4000>;
 					interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
-					dma-name = "rx", "tx";
+					dma-names = "rx", "tx";
 					clocks = <&clks IMX6SLL_CLK_UART3_IPG>,
 						 <&clks IMX6SLL_CLK_UART3_SERIAL>;
 					clock-names = "ipg", "per";
@@ -357,7 +358,7 @@
 			};
 
 			gpt1: timer@2098000 {
-				compatible = "fsl,imx6sl-gpt";
+				compatible = "fsl,imx6sl-gpt", "fsl,imx6dl-gpt";
 				reg = <0x02098000 0x4000>;
 				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SLL_CLK_GPT_BUS>,
@@ -506,12 +507,9 @@
 				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 
-				reg_3p0: regulator-3p0@20c8120 {
+				reg_3p0: regulator-3p0 {
 					compatible = "fsl,anatop-regulator";
-					reg = <0x20c8120>;
 					regulator-name = "vdd3p0";
 					regulator-min-microvolt = <2625000>;
 					regulator-max-microvolt = <3400000>;
@@ -524,7 +522,7 @@
 					anatop-enable-bit = <0>;
 				};
 
-				tempmon: temperature-sensor {
+				tempmon: tempmon {
 					compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon";
 					interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-parent = <&gpc>;
@@ -532,6 +530,7 @@
 					nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
 					nvmem-cell-names = "calib", "temp_grade";
 					clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>;
+					#thermal-sensor-cells = <0>;
 				};
 			};
 
@@ -551,7 +550,7 @@
 				reg = <0x020ca000 0x1000>;
 				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SLL_CLK_USBPHY2>;
-				phy-reg_3p0-supply = <&reg_3p0>;
+				phy-3p0-supply = <&reg_3p0>;
 				fsl,anatop = <&anatop>;
 			};
 
@@ -600,6 +599,18 @@
 				#interrupt-cells = <3>;
 				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&intc>;
+				clocks = <&clks IMX6SLL_CLK_IPG>;
+				clock-names = "ipg";
+
+				pgc {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					power-domain@0 {
+						reg = <0>;
+						#power-domain-cells = <0>;
+					};
+				};
 			};
 
 			iomuxc: pinctrl@20e0000 {
@@ -682,7 +693,6 @@
 				clocks = <&clks IMX6SLL_CLK_USBOH3>;
 				fsl,usbphy = <&usbphy1>;
 				fsl,usbmisc = <&usbmisc 0>;
-				fsl,anatop = <&anatop>;
 				ahb-burst-config = <0x0>;
 				tx-burst-size-dword = <0x10>;
 				rx-burst-size-dword = <0x10>;
diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/nxp/imx/imx6sx-nitrogen6sx.dts
index 66af78e83b70..1c1515a854c8 100644
--- a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-nitrogen6sx.dts
@@ -18,7 +18,7 @@
 
 	backlight-lvds {
 		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
+		pwms = <&pwm4 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 		power-supply = <&reg_3p3v>;
@@ -72,7 +72,6 @@
 		pinctrl-0 = <&pinctrl_reg_wlan>;
 		compatible = "regulator-fixed";
 		clocks = <&clks IMX6SX_CLK_CKO>;
-		clock-names = "slow";
 		regulator-name = "wlan-en";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
@@ -84,7 +83,7 @@
 	sound {
 		compatible = "fsl,imx-audio-sgtl5000";
 		model = "imx6sx-nitrogen6sx-sgtl5000";
-		cpu-dai = <&ssi1>;
+		ssi-controller = <&ssi1>;
 		audio-codec = <&codec>;
 		audio-routing =
 			"MIC_IN", "Mic Jack",
@@ -107,7 +106,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "microchip,sst25vf016b";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
@@ -196,6 +195,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_sgtl5000>;
 		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		clocks = <&clks IMX6SX_CLK_CKO2>;
 		VDDA-supply = <&reg_1p8v>;
 		VDDIO-supply = <&reg_1p8v>;
@@ -229,10 +229,8 @@
 };
 
 &pwm4 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
 };
 
 &ssi1 {
diff --git a/arch/arm/boot/dts/imx6sx-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx6sx-pinfunc.h
index f4dc46207954..f4dc46207954 100644
--- a/arch/arm/boot/dts/imx6sx-pinfunc.h
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-pinfunc.h
diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/nxp/imx/imx6sx-sabreauto.dts
index 83ee97252ff1..033700e052b3 100644
--- a/arch/arm/boot/dts/imx6sx-sabreauto.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-sabreauto.dts
@@ -20,7 +20,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_led>;
 
-		user {
+		led-user {
 			label = "debug";
 			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
@@ -97,11 +97,16 @@
 			"AIN2R", "Line In Jack";
 	};
 
+	spdif_in: spdif-in {
+		compatible = "linux,spdif-dir";
+		#sound-dai-cells = <0>;
+	};
+
 	sound-spdif {
 		compatible = "fsl,imx-audio-spdif";
 		model = "imx-spdif";
-		spdif-controller = <&spdif>;
-		spdif-in;
+		audio-cpu = <&spdif>;
+		audio-codec = <&spdif_in>;
 	};
 };
 
@@ -328,7 +333,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
 		fsl,pins = <
 			MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x170b9
 			MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x100b9
@@ -343,7 +348,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
 		fsl,pins = <
 			MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x170f9
 			MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x100f9
diff --git a/arch/arm/boot/dts/imx6sx-sdb-mqs.dts b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb-mqs.dts
index a4ab2d3e960c..a4ab2d3e960c 100644
--- a/arch/arm/boot/dts/imx6sx-sdb-mqs.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb-mqs.dts
diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb-reva.dts
index dce5dcf96c25..48f19dede467 100644
--- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb-reva.dts
@@ -15,7 +15,7 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 
@@ -123,7 +123,7 @@
 	pinctrl-0 = <&pinctrl_qspi2>;
 	status = "okay";
 
-	flash0: s25fl128s@0 {
+	flash0: flash@0 {
 		reg = <0>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -133,7 +133,7 @@
 		spi-tx-bus-width = <4>;
 	};
 
-	flash1: s25fl128s@2 {
+	flash1: flash@2 {
 		reg = <2>;
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/imx6sx-sdb-sai.dts b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb-sai.dts
index 1c4eacd68e1b..1c4eacd68e1b 100644
--- a/arch/arm/boot/dts/imx6sx-sdb-sai.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb-sai.dts
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dts
index 99f4cf777a38..e05a1be5553c 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dts
@@ -14,7 +14,7 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze200";
 		reg = <0x08>;
 
@@ -108,7 +108,7 @@
 	pinctrl-0 = <&pinctrl_qspi2>;
 	status = "okay";
 
-	flash0: n25q256a@0 {
+	flash0: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "micron,n25q256a", "jedec,spi-nor";
@@ -118,7 +118,7 @@
 		reg = <0>;
 	};
 
-	flash1: n25q256a@2 {
+	flash1: flash@2 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "micron,n25q256a", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi
new file mode 100644
index 000000000000..3e238d8118fa
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi
@@ -0,0 +1,719 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2014 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6sx.dtsi"
+
+/ {
+	model = "Freescale i.MX6 SoloX SDB Board";
+	compatible = "fsl,imx6sx-sdb", "fsl,imx6sx";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	backlight_display: backlight-display {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
+		};
+	};
+
+	vcc_sd3: regulator-vcc-sd3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vcc_sd3>;
+		regulator-name = "VCC_SD3";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_otg1>;
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_otg2>;
+		regulator-name = "usb_otg2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_psu_5v: regulator-psu-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "PSU-5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_lcd_3v3: regulator-lcd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-3v3";
+		gpio = <&gpio3 27 0>;
+		enable-active-high;
+	};
+
+	reg_peri_3v3: regulator-peri-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_peri_3v3>;
+		regulator-name = "peri_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_enet_3v3: regulator-enet-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enet_3v3>;
+		regulator-name = "enet_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 6 GPIO_ACTIVE_LOW>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_pcie_gpio: regulator-pcie {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcie_reg>;
+		regulator-name = "MPCIE_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lcd_5v: regulator-lcd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_can_en: regulator-can-en {
+		compatible = "regulator-fixed";
+		regulator-name = "can-en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_can_stby: regulator-can-stby {
+		compatible = "regulator-fixed";
+		regulator-name = "can-stby";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	sound {
+		compatible = "fsl,imx6sx-sdb-wm8962", "fsl,imx-audio-wm8962";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hp>;
+		model = "wm8962-audio";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Ext Spk", "SPKOUTL",
+			"Ext Spk", "SPKOUTR",
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC";
+		mux-int-port = <2>;
+		mux-ext-port = <6>;
+		hp-det-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+	};
+
+	panel {
+		compatible = "sii,43wvf1g";
+		backlight = <&backlight_display>;
+		dvdd-supply = <&reg_lcd_3v3>;
+		avdd-supply = <&reg_lcd_5v>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
+	spdif_out: spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx6sx-sdb-spdif",
+			     "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		audio-cpu = <&spdif>;
+		audio-codec = <&spdif_out>;
+	};
+
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-supply = <&reg_enet_3v3>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy1>;
+	phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+
+		ethphy2: ethernet-phy@2 {
+			reg = <2>;
+		};
+	};
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy2>;
+	fsl,magic-packet;
+	status = "okay";
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can_stby>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can_stby>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	codec: wm8962@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clks IMX6SX_CLK_AUDIO>;
+		DCVDD-supply = <&vgen4_reg>;
+		DBVDD-supply = <&vgen4_reg>;
+		AVDD-supply = <&vgen4_reg>;
+		CPVDD-supply = <&vgen4_reg>;
+		MICVDD-supply = <&vgen3_reg>;
+		PLLVDD-supply = <&vgen4_reg>;
+		SPKVDD1-supply = <&reg_psu_5v>;
+		SPKVDD2-supply = <&reg_psu_5v>;
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie_gpio>;
+	status = "okay";
+};
+
+&lcdif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcd>;
+	status = "okay";
+
+	port {
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	status = "disabled";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	assigned-clocks = <&clks IMX6SX_CLK_SPDIF_PODF>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart5 { /* for bluetooth */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1_id>;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usbphy2 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	non-removable;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	cd-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&vcc_sd3>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	cd-gpios = <&gpio6 21 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6SX_PAD_CSI_DATA00__AUDMUX_AUD6_TXC	0x130b0
+			MX6SX_PAD_CSI_DATA01__AUDMUX_AUD6_TXFS	0x130b0
+			MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD	0x120b0
+			MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD	0x130b0
+			MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK	0x130b0
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6SX_PAD_ENET1_MDIO__ENET1_MDIO	0xa0b1
+			MX6SX_PAD_ENET1_MDC__ENET1_MDC		0xa0b1
+			MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC	0xa0b1
+			MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0	0xa0b1
+			MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1	0xa0b1
+			MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2	0xa0b1
+			MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3	0xa0b1
+			MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN	0xa0b1
+			MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK	0x3081
+			MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0	0x3081
+			MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1	0x3081
+			MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2	0x3081
+			MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3	0x3081
+			MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN	0x3081
+			MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M	0x91
+			/* phy reset */
+			MX6SX_PAD_ENET2_CRS__GPIO2_IO_7		0x10b0
+		>;
+	};
+
+	pinctrl_enet_3v3: enet3v3grp {
+		fsl,pins = <
+			MX6SX_PAD_ENET2_COL__GPIO2_IO_6		0x80000000
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC	0xa0b9
+			MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0	0xa0b1
+			MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1	0xa0b1
+			MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2	0xa0b1
+			MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3	0xa0b1
+			MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN	0xa0b1
+			MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK	0x3081
+			MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0	0x3081
+			MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1	0x3081
+			MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2	0x3081
+			MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3	0x3081
+			MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN	0x3081
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6SX_PAD_QSPI1B_DQS__CAN1_TX		0x1b020
+			MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX		0x1b020
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX		0x1b020
+			MX6SX_PAD_QSPI1A_DQS__CAN2_TX		0x1b020
+		>;
+	};
+
+	pinctrl_gpio_keys: gpio_keysgrp {
+		fsl,pins = <
+			MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x17059
+			MX6SX_PAD_CSI_DATA05__GPIO1_IO_19 0x17059
+		>;
+	};
+
+	pinctrl_hp: hpgrp {
+		fsl,pins = <
+			MX6SX_PAD_CSI_DATA03__GPIO1_IO_17 0x17059
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO01__I2C1_SDA		0x4001b8b1
+			MX6SX_PAD_GPIO1_IO00__I2C1_SCL		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6SX_PAD_KEY_ROW4__I2C3_SDA		0x4001b8b1
+			MX6SX_PAD_KEY_COL4__I2C3_SCL		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX6SX_PAD_CSI_DATA07__I2C4_SDA		0x4001b8b1
+			MX6SX_PAD_CSI_DATA06__I2C4_SCL		0x4001b8b1
+		>;
+	};
+
+	pinctrl_lcd: lcdgrp {
+		fsl,pins = <
+			MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0
+			MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0
+			MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0
+			MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0
+			MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0
+			MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0
+			MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0
+			MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0
+			MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0
+			MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0
+			MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0
+			MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0
+			MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0
+			MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0
+			MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0
+			MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0
+			MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0
+			MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0
+			MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0
+			MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0
+			MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0
+			MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0
+			MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0
+			MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0
+			MX6SX_PAD_LCD1_CLK__LCDIF1_CLK	0x4001b0b0
+			MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0
+			MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0
+			MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0
+			MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0
+		>;
+	};
+
+	pinctrl_mqs: mqsgrp {
+		fsl,pins = <
+			MX6SX_PAD_SD2_CLK__MQS_RIGHT 0x120b0
+			MX6SX_PAD_SD2_CMD__MQS_LEFT  0x120b0
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6SX_PAD_ENET1_COL__GPIO2_IO_0 0x10b0
+		>;
+	};
+
+	pinctrl_pcie_reg: pciereggrp {
+		fsl,pins = <
+			MX6SX_PAD_ENET1_CRS__GPIO2_IO_1	0x10b0
+		>;
+	};
+
+	pinctrl_peri_3v3: peri3v3grp {
+		fsl,pins = <
+			MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16	0x80000000
+		>;
+	};
+
+	pinctrl_pwm3: pwm3-1grp {
+		fsl,pins = <
+			MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x110b0
+		>;
+	};
+
+	pinctrl_qspi2: qspi2grp {
+		fsl,pins = <
+			MX6SX_PAD_NAND_WP_B__QSPI2_A_DATA_0     0x70f1
+			MX6SX_PAD_NAND_READY_B__QSPI2_A_DATA_1  0x70f1
+			MX6SX_PAD_NAND_CE0_B__QSPI2_A_DATA_2    0x70f1
+			MX6SX_PAD_NAND_CE1_B__QSPI2_A_DATA_3    0x70f1
+			MX6SX_PAD_NAND_CLE__QSPI2_A_SCLK        0x70f1
+			MX6SX_PAD_NAND_ALE__QSPI2_A_SS0_B       0x70f1
+			MX6SX_PAD_NAND_DATA01__QSPI2_B_DATA_0   0x70f1
+			MX6SX_PAD_NAND_DATA00__QSPI2_B_DATA_1   0x70f1
+			MX6SX_PAD_NAND_WE_B__QSPI2_B_DATA_2     0x70f1
+			MX6SX_PAD_NAND_RE_B__QSPI2_B_DATA_3     0x70f1
+			MX6SX_PAD_NAND_DATA02__QSPI2_B_SCLK     0x70f1
+			MX6SX_PAD_NAND_DATA03__QSPI2_B_SS0_B    0x70f1
+		>;
+	};
+
+	pinctrl_vcc_sd3: vccsd3grp {
+		fsl,pins = <
+			MX6SX_PAD_KEY_COL1__GPIO2_IO_11		0x17059
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			MX6SX_PAD_CSI_DATA00__SAI1_TX_BCLK	0x130b0
+			MX6SX_PAD_CSI_DATA01__SAI1_TX_SYNC	0x130b0
+			MX6SX_PAD_CSI_HSYNC__SAI1_TX_DATA_0	0x120b0
+			MX6SX_PAD_CSI_VSYNC__SAI1_RX_DATA_0	0x130b0
+			MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK	0x130b0
+		>;
+	};
+
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <
+			MX6SX_PAD_SD4_DATA4__SPDIF_OUT          0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX	0x1b0b1
+			MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6SX_PAD_KEY_ROW3__UART5_DCE_RX	0x1b0b1
+			MX6SX_PAD_KEY_COL3__UART5_DCE_TX	0x1b0b1
+			MX6SX_PAD_KEY_ROW2__UART5_DCE_CTS	0x1b0b1
+			MX6SX_PAD_KEY_COL2__UART5_DCE_RTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_usb_otg1: usbotg1grp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9	0x10b0
+		>;
+	};
+
+	pinctrl_usb_otg1_id: usbotg1idgrp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID	0x17059
+		>;
+	};
+
+	pinctrl_usb_otg2: usbot2ggrp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO12__GPIO1_IO_12	0x10b0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6SX_PAD_SD2_CMD__USDHC2_CMD		0x17059
+			MX6SX_PAD_SD2_CLK__USDHC2_CLK		0x10059
+			MX6SX_PAD_SD2_DATA0__USDHC2_DATA0	0x17059
+			MX6SX_PAD_SD2_DATA1__USDHC2_DATA1	0x17059
+			MX6SX_PAD_SD2_DATA2__USDHC2_DATA2	0x17059
+			MX6SX_PAD_SD2_DATA3__USDHC2_DATA3	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x17059
+			MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x10059
+			MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x17059
+			MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x17059
+			MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x17059
+			MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x17059
+			MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x17059
+			MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x17059
+			MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x17059
+			MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x17059
+			MX6SX_PAD_KEY_COL0__GPIO2_IO_10		0x17059 /* CD */
+			MX6SX_PAD_KEY_ROW0__GPIO2_IO_15		0x17059 /* WP */
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x170b9
+			MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x100b9
+			MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x170b9
+			MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x170b9
+			MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x170b9
+			MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x170b9
+			MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x170b9
+			MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x170b9
+			MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x170b9
+			MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x170f9
+			MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x100f9
+			MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x170f9
+			MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x170f9
+			MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x170f9
+			MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x170f9
+			MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x170f9
+			MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x170f9
+			MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x170f9
+			MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x17059
+			MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x10059
+			MX6SX_PAD_SD4_DATA0__USDHC4_DATA0	0x17059
+			MX6SX_PAD_SD4_DATA1__USDHC4_DATA1	0x17059
+			MX6SX_PAD_SD4_DATA2__USDHC4_DATA2	0x17059
+			MX6SX_PAD_SD4_DATA3__USDHC4_DATA3	0x17059
+			MX6SX_PAD_SD4_DATA7__GPIO6_IO_21	0x17059 /* CD */
+			MX6SX_PAD_SD4_DATA6__GPIO6_IO_20	0x17059 /* WP */
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6SX_PAD_GPIO1_IO13__WDOG1_WDOG_ANY 0x30b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts b/arch/arm/boot/dts/nxp/imx/imx6sx-softing-vining-2000.dts
index b9a1401e6c6d..2ffbe2df4776 100644
--- a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-softing-vining-2000.dts
@@ -46,19 +46,19 @@
 		led-1 {
 			label = "red";
 			max-brightness = <255>;
-			pwms = <&pwm6 0 50000>;
+			pwms = <&pwm6 0 50000 0>;
 		};
 
 		led-2 {
 			label = "green";
 			max-brightness = <255>;
-			pwms = <&pwm2 0 50000>;
+			pwms = <&pwm2 0 50000 0>;
 		};
 
 		led-3 {
 			label = "blue";
 			max-brightness = <255>;
-			pwms = <&pwm1 0 50000>;
+			pwms = <&pwm1 0 50000 0>;
 		};
 	};
 };
@@ -171,7 +171,7 @@
 		reset-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
 	};
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze200";
 		reg = <0x08>;
 
@@ -358,21 +358,21 @@
 		>;
 	};
 
-	pinctrl_pwm1: pwm1grp-1 {
+	pinctrl_pwm1: pwm1-1grp {
 		fsl,pins = <
 			/* blue LED */
 			MX6SX_PAD_RGMII2_RD3__PWM1_OUT		0x1b0b1
 		>;
 	};
 
-	pinctrl_pwm2: pwm2grp-1 {
+	pinctrl_pwm2: pwm2-1grp {
 		fsl,pins = <
 			/* green LED */
 			MX6SX_PAD_RGMII2_RD2__PWM2_OUT		0x1b0b1
 		>;
 	};
 
-	pinctrl_pwm6: pwm6grp-1 {
+	pinctrl_pwm6: pwm6-1grp {
 		fsl,pins = <
 			/* red LED */
 			MX6SX_PAD_RGMII2_TD2__PWM6_OUT		0x1b0b1
@@ -414,7 +414,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_50mhz: usdhc2grp-50mhz {
+	pinctrl_usdhc2_50mhz: usdhc2-50mhzgrp {
 		fsl,pins = <
 			MX6SX_PAD_SD2_CLK__USDHC2_CLK		0x10059
 			MX6SX_PAD_SD2_CMD__USDHC2_CMD		0x17059
@@ -427,7 +427,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
 		fsl,pins = <
 			MX6SX_PAD_SD2_CLK__USDHC2_CLK		0x100b9
 			MX6SX_PAD_SD2_CMD__USDHC2_CMD		0x170b9
@@ -438,7 +438,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_200mhz: usdhc2grp-200mhz {
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
 		fsl,pins = <
 			MX6SX_PAD_SD2_CLK__USDHC2_CLK		0x100f9
 			MX6SX_PAD_SD2_CMD__USDHC2_CMD		0x170f9
@@ -449,7 +449,7 @@
 		>;
 	};
 
-	pinctrl_usdhc4_50mhz: usdhc4grp-50mhz {
+	pinctrl_usdhc4_50mhz: usdhc4-50mhzgrp {
 		fsl,pins = <
 			MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x10059
 			MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x17059
@@ -465,7 +465,7 @@
 		>;
 	};
 
-	pinctrl_usdhc4_100mhz: usdhc4-100mhz {
+	pinctrl_usdhc4_100mhz: usdhc4-100mhzgrp {
 		fsl,pins = <
 			MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x100b9
 			MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x170b9
@@ -480,7 +480,7 @@
 		>;
 	};
 
-	pinctrl_usdhc4_200mhz: usdhc4-200mhz {
+	pinctrl_usdhc4_200mhz: usdhc4-200mhzgrp {
 		fsl,pins = <
 			MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x100f9
 			MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x170f9
@@ -505,24 +505,18 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
 };
 
 &pwm2 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm2>;
-	status = "okay";
 };
 
 &pwm6 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm6>;
-	status = "okay";
 };
 
 &reg_arm {
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts b/arch/arm/boot/dts/nxp/imx/imx6sx-udoo-neo-basic.dts
index 205ea26484e3..205ea26484e3 100644
--- a/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-udoo-neo-basic.dts
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts b/arch/arm/boot/dts/nxp/imx/imx6sx-udoo-neo-extended.dts
index 5817b4985391..5817b4985391 100644
--- a/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-udoo-neo-extended.dts
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts b/arch/arm/boot/dts/nxp/imx/imx6sx-udoo-neo-full.dts
index 96f4d89848a3..96f4d89848a3 100644
--- a/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-udoo-neo-full.dts
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sx-udoo-neo.dtsi
index ee645655090d..bbf792ac4896 100644
--- a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-udoo-neo.dtsi
@@ -15,14 +15,14 @@
 	leds {
 		compatible = "gpio-leds";
 
-		red {
+		led-red {
 			label = "udoo-neo:red:mmc";
 			gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 			linux,default-trigger = "mmc0";
 		};
 
-		orange {
+		led-orange {
 			label = "udoo-neo:orange:user";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
@@ -72,6 +72,11 @@
 	};
 };
 
+&clks {
+	assigned-clocks = <&clks IMX6SX_CLK_ENET_REF>;
+	assigned-clock-rates = <50000000>;
+};
+
 &fec1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet1>;
@@ -183,6 +188,27 @@
 	status = "okay";
 };
 
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	hdmi-transmitter@70 {
+		compatible = "nxp,tda998x";
+		reg = <0x70>;
+		interrupts-extended = <&gpio3 27 IRQ_TYPE_LEVEL_LOW>;
+
+		ports {
+			port {
+				hdmi: endpoint {
+					remote-endpoint = <&lcdc>;
+				};
+			};
+		};
+	};
+};
+
 &i2c4 { /* Onboard Motion sensors */
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c4>;
@@ -190,10 +216,22 @@
 	status = "disabled";
 };
 
+&lcdif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcd>;
+	status = "okay";
+
+	port {
+		lcdc: endpoint {
+			remote-endpoint = <&hdmi>;
+		};
+	};
+};
+
 &iomuxc {
 	pinctrl_bt_reg: btreggrp {
 		fsl,pins =
-			<MX6SX_PAD_KEY_ROW2__GPIO2_IO_17        0x15059>;
+			<MX6SX_PAD_KEY_ROW2__GPIO2_IO_17	0x15059>;
 	};
 
 	pinctrl_enet1: enet1grp {
@@ -227,12 +265,52 @@
 			<MX6SX_PAD_GPIO1_IO02__I2C2_SCL		0x4001b8b1>;
 	};
 
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins =
+			<MX6SX_PAD_KEY_ROW4__I2C3_SDA			0x4001b8b1>,
+			<MX6SX_PAD_KEY_COL4__I2C3_SCL			0x4001b8b1>;
+	};
+
 	pinctrl_i2c4: i2c4grp {
 		fsl,pins =
 			<MX6SX_PAD_USB_H_DATA__I2C4_SDA		0x4001b8b1>,
 			<MX6SX_PAD_USB_H_STROBE__I2C4_SCL	0x4001b8b1>;
 	};
 
+	pinctrl_lcd: lcdgrp {
+		fsl,pins = <
+			MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23		0x4001b0b0
+			MX6SX_PAD_LCD1_CLK__LCDIF1_CLK		0x4001b0b0
+			MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE		0x4001b0b0
+			MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC		0x4001b0b0
+			MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC		0x4001b0b0
+			MX6SX_PAD_LCD1_RESET__GPIO3_IO_27		0x4001b0b0
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins =
 			<MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX	0x1b0b1>,
@@ -273,24 +351,23 @@
 
 	pinctrl_otg1_reg: otg1grp {
 		fsl,pins =
-			<MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9        0x10b0>;
+			<MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9	0x10b0>;
 	};
 
-
 	pinctrl_otg2_reg: otg2grp {
 		fsl,pins =
-			<MX6SX_PAD_NAND_RE_B__GPIO4_IO_12        0x10b0>;
+			<MX6SX_PAD_NAND_RE_B__GPIO4_IO_12	0x10b0>;
 	};
 
 	pinctrl_usb_otg1: usbotg1grp {
 		fsl,pins =
-			<MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID    0x17059>,
-			<MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC       0x10b0>;
+			<MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID	0x17059>,
+			<MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC	0x10b0>;
 	};
 
 	pinctrl_usb_otg2: usbot2ggrp {
 		fsl,pins =
-			<MX6SX_PAD_QSPI1A_DATA0__USB_OTG2_OC     0x10b0>;
+			<MX6SX_PAD_QSPI1A_DATA0__USB_OTG2_OC	0x10b0>;
 	};
 
 	pinctrl_usdhc2: usdhc2grp {
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi
index 8516730778df..5132b575b001 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi
@@ -154,7 +154,7 @@
 		#phy-cells = <0>;
 	};
 
-	soc {
+	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
@@ -164,12 +164,18 @@
 		ocram_s: sram@8f8000 {
 			compatible = "mmio-sram";
 			reg = <0x008f8000 0x4000>;
+			ranges = <0 0x008f8000 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6SX_CLK_OCRAM_S>;
 		};
 
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6SX_CLK_OCRAM>;
 		};
 
@@ -203,20 +209,19 @@
 			power-domains = <&pd_pu>;
 		};
 
-		dma_apbh: dma-apbh@1804000 {
+		dma_apbh: dma-controller@1804000 {
 			compatible = "fsl,imx6sx-dma-apbh", "fsl,imx28-dma-apbh";
 			reg = <0x01804000 0x2000>;
 			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
 			#dma-cells = <1>;
 			dma-channels = <4>;
 			clocks = <&clks IMX6SX_CLK_APBH_DMA>;
 		};
 
-		gpmi: nand-controller@1806000{
+		gpmi: nand-controller@1806000 {
 			compatible = "fsl,imx6sx-gpmi-nand";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -334,15 +339,14 @@
 				};
 
 				esai: esai@2024000 {
-					compatible = "fsl,imx6sx-esai", "fsl,imx35-esai";
+					compatible = "fsl,imx35-esai";
 					reg = <0x02024000 0x4000>;
 					interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SX_CLK_ESAI_IPG>,
-						 <&clks IMX6SX_CLK_ESAI_MEM>,
 						 <&clks IMX6SX_CLK_ESAI_EXTAL>,
 						 <&clks IMX6SX_CLK_ESAI_IPG>,
 						 <&clks IMX6SX_CLK_SPBA>;
-					clock-names = "core", "mem", "extal",
+					clock-names = "core", "extal",
 						      "fsys", "spba";
 					dmas = <&sdma 23 21 0>,
 					       <&sdma 24 21 0>;
@@ -413,7 +417,7 @@
 					       <&sdma 21 23 1>, <&sdma 22 23 1>;
 					dma-names = "rxa", "rxb", "rxc",
 						    "txa", "txb", "txc";
-					fsl,asrc-rate  = <48000>;
+					fsl,asrc-rate = <48000>;
 					fsl,asrc-width = <16>;
 					status = "okay";
 				};
@@ -633,8 +637,8 @@
 				reg_vdd3p0: regulator-3p0 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vdd3p0";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <3150000>;
+					regulator-min-microvolt = <2625000>;
+					regulator-max-microvolt = <3400000>;
 					regulator-always-on;
 					anatop-reg-offset = <0x120>;
 					anatop-vol-bit-shift = <8>;
@@ -711,13 +715,14 @@
 				};
 
 				tempmon: tempmon {
-					compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon";
+					compatible = "fsl,imx6sx-tempmon";
 					interrupt-parent = <&gpc>;
 					interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 					fsl,tempmon = <&anatop>;
 					nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
 					nvmem-cell-names = "calib", "temp_grade";
 					clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
+					#thermal-sensor-cells = <0>;
 				};
 			};
 
@@ -726,6 +731,7 @@
 				reg = <0x020c9000 0x1000>;
 				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SX_CLK_USBPHY1>;
+				phy-3p0-supply = <&reg_vdd3p0>;
 				fsl,anatop = <&anatop>;
 			};
 
@@ -734,6 +740,7 @@
 				reg = <0x020ca000 0x1000>;
 				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SX_CLK_USBPHY2>;
+				phy-3p0-supply = <&reg_vdd3p0>;
 				fsl,anatop = <&anatop>;
 			};
 
@@ -836,13 +843,42 @@
 				reg = <0x020e0000 0x4000>;
 			};
 
-			gpr: iomuxc-gpr@20e4000 {
+			gpr: syscon@20e4000 {
 				compatible = "fsl,imx6sx-iomuxc-gpr",
-					     "fsl,imx6q-iomuxc-gpr", "syscon";
+					     "fsl,imx6q-iomuxc-gpr", "syscon", "simple-mfd";
+				#address-cells = <1>;
+				#size-cells = <1>;
 				reg = <0x020e4000 0x4000>;
+
+				lvds_bridge: bridge@18 {
+					compatible = "fsl,imx6sx-ldb";
+					reg = <0x18 0x4>;
+					clocks = <&clks IMX6SX_CLK_LDB_DI0>;
+					clock-names = "ldb";
+					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							ldb_from_lcdif1: endpoint {
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							ldb_lvds_ch0: endpoint {
+							};
+						};
+					};
+				};
 			};
 
-			sdma: sdma@20ec000 {
+			sdma: dma-controller@20ec000 {
 				compatible = "fsl,imx6sx-sdma", "fsl,imx6q-sdma";
 				reg = <0x020ec000 0x4000>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
@@ -895,7 +931,6 @@
 				clocks = <&clks IMX6SX_CLK_USBOH3>;
 				fsl,usbphy = <&usbphy1>;
 				fsl,usbmisc = <&usbmisc 0>;
-				fsl,anatop = <&anatop>;
 				ahb-burst-config = <0x0>;
 				tx-burst-size-dword = <0x10>;
 				rx-burst-size-dword = <0x10>;
@@ -923,7 +958,6 @@
 				fsl,usbphy = <&usbphynop1>;
 				fsl,usbmisc = <&usbmisc 2>;
 				phy_type = "hsic";
-				fsl,anatop = <&anatop>;
 				dr_mode = "host";
 				ahb-burst-config = <0x0>;
 				tx-burst-size-dword = <0x10>;
@@ -967,7 +1001,7 @@
 			};
 
 			usdhc1: mmc@2190000 {
-				compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
+				compatible = "fsl,imx6sx-usdhc";
 				reg = <0x02190000 0x4000>;
 				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SX_CLK_USDHC1>,
@@ -975,11 +1009,13 @@
 					 <&clks IMX6SX_CLK_USDHC1>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step = <2>;
 				status = "disabled";
 			};
 
 			usdhc2: mmc@2194000 {
-				compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
+				compatible = "fsl,imx6sx-usdhc";
 				reg = <0x02194000 0x4000>;
 				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SX_CLK_USDHC2>,
@@ -987,11 +1023,13 @@
 					 <&clks IMX6SX_CLK_USDHC2>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step = <2>;
 				status = "disabled";
 			};
 
 			usdhc3: mmc@2198000 {
-				compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
+				compatible = "fsl,imx6sx-usdhc";
 				reg = <0x02198000 0x4000>;
 				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SX_CLK_USDHC3>,
@@ -999,11 +1037,13 @@
 					 <&clks IMX6SX_CLK_USDHC3>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step = <2>;
 				status = "disabled";
 			};
 
 			usdhc4: mmc@219c000 {
-				compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
+				compatible = "fsl,imx6sx-usdhc";
 				reg = <0x0219c000 0x4000>;
 				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SX_CLK_USDHC4>,
@@ -1067,7 +1107,7 @@
 				status = "disabled";
 			};
 
-			weim: weim@21b8000 {
+			weim: memory-controller@21b8000 {
 				#address-cells = <2>;
 				#size-cells = <1>;
 				compatible = "fsl,imx6sx-weim", "fsl,imx6q-weim";
@@ -1271,8 +1311,17 @@
 						 <&clks IMX6SX_CLK_LCDIF_APB>,
 						 <&clks IMX6SX_CLK_DISPLAY_AXI>;
 					clock-names = "pix", "axi", "disp_axi";
+					assigned-clocks = <&clks IMX6SX_CLK_LCDIF1_PRE_SEL>,
+							  <&clks IMX6SX_CLK_LCDIF1_SEL>;
+					assigned-clock-parents = <&clks IMX6SX_CLK_PLL5_VIDEO_DIV>,
+								 <&clks IMX6SX_CLK_LCDIF1_PODF>;
 					power-domains = <&pd_disp>;
 					status = "disabled";
+
+					port {
+						lcdif1_to_ldb: endpoint {
+						};
+					};
 				};
 
 				lcdif2: lcdif@2224000 {
@@ -1385,7 +1434,7 @@
 
 			pwm8: pwm@22b0000 {
 				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
-				reg = <0x0022b0000 0x4000>;
+				reg = <0x022b0000 0x4000>;
 				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SX_CLK_PWM8>,
 					 <&clks IMX6SX_CLK_PWM8>;
@@ -1395,15 +1444,15 @@
 		};
 
 		pcie: pcie@8ffc000 {
-			compatible = "fsl,imx6sx-pcie", "snps,dw-pcie";
+			compatible = "fsl,imx6sx-pcie";
 			reg = <0x08ffc000 0x04000>, <0x08f00000 0x80000>;
 			reg-names = "dbi", "config";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
 			bus-range = <0x00 0xff>;
-			ranges = <0x81000000 0 0          0x08f80000 0 0x00010000 /* downstream I/O */
-				  0x82000000 0 0x08000000 0x08000000 0 0x00f00000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0 0          0x08f80000 0 0x00010000>, /* downstream I/O */
+				 <0x82000000 0 0x08000000 0x08000000 0 0x00f00000>; /* non-prefetchable memory */
 			num-lanes = <1>;
 			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dts
index 2438669f149a..2438669f149a 100644
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dts
diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi
index a3fde3316c73..3d147b160ecf 100644
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi
@@ -2,6 +2,8 @@
 //
 // Copyright (C) 2015 Freescale Semiconductor, Inc.
 
+#include <dt-bindings/media/video-interfaces.h>
+
 / {
 	chosen {
 		stdout-path = &uart1;
@@ -14,12 +16,39 @@
 
 	backlight_display: backlight-display {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 		status = "okay";
 	};
 
+	reg_1v5: regulator-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v5";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_2v8: regulator-2v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "2v8";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 
 	reg_sd1_vmmc: regulator-sd1-vmmc {
 		compatible = "regulator-fixed";
@@ -60,13 +89,40 @@
 		gpios = <&gpio_spi 3 GPIO_ACTIVE_LOW>;
 	};
 
+	reg_audio_5v: regulator-audio-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_audio_3v3: regulator-audio-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_audio_1v8: regulator-audio-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	sound-wm8960 {
 		compatible = "fsl,imx-audio-wm8960";
 		model = "wm8960-audio";
 		audio-cpu = <&sai2>;
 		audio-codec = <&codec>;
 		audio-asrc = <&asrc>;
-		hp-det-gpio = <&gpio5 4 0>;
+		hp-det-gpios = <&gpio5 4 0>;
 		audio-routing =
 			"Headphone Jack", "HP_L",
 			"Headphone Jack", "HP_R",
@@ -82,13 +138,13 @@
 			"AMIC", "MICB";
 	};
 
-	spi4 {
+	spi-4 {
 		compatible = "spi-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_spi4>;
 		status = "okay";
-		gpio-sck = <&gpio5 11 0>;
-		gpio-mosi = <&gpio5 10 0>;
+		sck-gpios = <&gpio5 11 0>;
+		mosi-gpios = <&gpio5 10 0>;
 		cs-gpios = <&gpio5 7 GPIO_ACTIVE_LOW>;
 		num-chipselects = <1>;
 		#address-cells = <1>;
@@ -108,6 +164,7 @@
 	panel {
 		compatible = "innolux,at043tn24";
 		backlight = <&backlight_display>;
+		power-supply = <&reg_3v3>;
 
 		port {
 			panel_in: endpoint {
@@ -137,6 +194,11 @@
 		wlf,gpio-cfg = <1 3>;
 		clocks = <&clks IMX6UL_CLK_SAI2>;
 		clock-names = "mclk";
+		AVDD-supply = <&reg_audio_3v3>;
+		DBVDD-supply = <&reg_audio_1v8>;
+		DCVDD-supply = <&reg_audio_1v8>;
+		SPKVDD1-supply = <&reg_audio_5v>;
+		SPKVDD2-supply = <&reg_audio_5v>;
 	};
 
 	camera@3c {
@@ -148,6 +210,9 @@
 		clock-names = "xclk";
 		powerdown-gpios = <&gpio_spi 6 GPIO_ACTIVE_HIGH>;
 		reset-gpios = <&gpio_spi 5 GPIO_ACTIVE_LOW>;
+		AVDD-supply = <&reg_2v8>;
+		DVDD-supply = <&reg_1v5>;
+		DOVDD-supply = <&reg_1v8>;
 
 		port {
 			ov5640_to_parallel: endpoint {
@@ -170,7 +235,7 @@
 	port {
 		parallel_from_ov5640: endpoint {
 			remote-endpoint = <&ov5640_to_parallel>;
-			bus-type = <5>; /* Parallel bus */
+			bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
 		};
 	};
 };
@@ -275,7 +340,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
@@ -286,7 +350,7 @@
 	pinctrl-0 = <&pinctrl_qspi>;
 	status = "okay";
 
-	flash0: n25q256a@0 {
+	flash0: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "micron,n25q256a", "jedec,spi-nor";
@@ -319,7 +383,7 @@
 &tsc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_tsc>;
-	xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+	xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
 	measure-delay-time = <0xffff>;
 	pre-charge-time = <0xfff>;
 	status = "okay";
@@ -388,8 +452,6 @@
 };
 
 &iomuxc {
-	pinctrl-names = "default";
-
 	pinctrl_camera_clock: cameraclockgrp {
 		fsl,pins = <
 			MX6UL_PAD_CSI_MCLK__CSI_MCLK		0x1b088
@@ -440,14 +502,14 @@
 		>;
 	};
 
-	pinctrl_flexcan1: flexcan1grp{
+	pinctrl_flexcan1: flexcan1grp {
 		fsl,pins = <
 			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b020
 			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b020
 		>;
 	};
 
-	pinctrl_flexcan2: flexcan2grp{
+	pinctrl_flexcan2: flexcan2grp {
 		fsl,pins = <
 			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
 			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
@@ -607,7 +669,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+	pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
 		fsl,pins = <
 			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170b9
 			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100b9
@@ -619,7 +681,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
 		fsl,pins = <
 			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170f9
 			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100f9
diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcexpress.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsbcexpress.dts
index 3792679c0c90..0d3b1ab82eab 100644
--- a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcexpress.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsbcexpress.dts
@@ -112,7 +112,7 @@
 		>;
 	};
 
-	pinctrl_ecspi3_master: ecspi3grp1 {
+	pinctrl_ecspi3_master: ecspi3-1-grp {
 		fsl,pins = <
 			MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK	0x10b0
 			MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI	0x10b0
@@ -121,7 +121,7 @@
 		>;
 	};
 
-	pinctrl_ecspi3_slave: ecspi3grp2 {
+	pinctrl_ecspi3_slave: ecspi3-2-grp {
 		fsl,pins = <
 			MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK	0x10b0
 			MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI	0x10b0
@@ -145,7 +145,7 @@
 		>;
 	};
 
-	pinctrl_flexcan1: flexcan1grp{
+	pinctrl_flexcan1: flexcan1grp {
 		fsl,pins = <
 			MX6UL_PAD_LCD_DATA08__FLEXCAN1_TX	0x1b020
 			MX6UL_PAD_LCD_DATA09__FLEXCAN1_RX	0x1b020
diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsbcpro.dts
index 3ec042bfccba..8aea8c99e2af 100644
--- a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsbcpro.dts
@@ -18,7 +18,7 @@
 
 	lcd_backlight: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm5 0 50000>;
+		pwms = <&pwm5 0 50000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 		status = "okay";
@@ -168,7 +168,6 @@
 };
 
 &pwm5 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm5>;
 	status = "okay";
@@ -249,7 +248,7 @@
 		>;
 	};
 
-	pinctrl_ecspi1_master: ecspi1grp1 {
+	pinctrl_ecspi1_master: ecspi1-1-grp {
 		fsl,pins = <
 			MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK	0x10b0
 			MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI	0x10b0
@@ -291,26 +290,26 @@
 		>;
 	};
 
-	pinctrl_flexcan1: flexcan1grp{
+	pinctrl_flexcan1: flexcan1grp {
 		fsl,pins = <
 			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b020
 			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b020
 		>;
 	};
-	pinctrl_flexcan2: flexcan2grp{
+	pinctrl_flexcan2: flexcan2grp {
 		fsl,pins = <
 			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
 			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
 		>;
 	};
 
-	pinctrl_goodix_touch: goodixgrp{
+	pinctrl_goodix_touch: goodixgrp {
 		fsl,pins = <
 			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x1020
 		>;
 	};
 
-	pinctrl_lcdif_dat0_17: lcdifdatgrp0-17 {
+	pinctrl_lcdif_dat0_17: lcdifdat0-17-grp {
 		fsl,pins = <
 			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00	0x79
 			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01	0x79
@@ -333,14 +332,14 @@
 		>;
 	};
 
-	pinctrl_lcdif_clken: lcdifctrlgrp1 {
+	pinctrl_lcdif_clken: lcdifctrl-1-grp {
 		fsl,pins = <
 			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x17050
 			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x79
 		>;
 	};
 
-	pinctrl_lcdif_hvsync: lcdifctrlgrp2 {
+	pinctrl_lcdif_hvsync: lcdifctrl-2-grp {
 		fsl,pins = <
 			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x79
 			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x79
@@ -371,7 +370,7 @@
 		>;
 	};
 
-	pinctrl_sai2_sleep: sai2grp-sleep {
+	pinctrl_sai2_sleep: sai2-sleep-grp {
 		fsl,pins = <
 			MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15	0x3000
 			MX6UL_PAD_JTAG_TCK__GPIO1_IO14		0x3000
@@ -382,7 +381,7 @@
 		>;
 	};
 
-	pinctrl_uart2_4wires: uart2grp-4wires {
+	pinctrl_uart2_4wires: uart2-4wires-grp {
 		fsl,pins = <
 			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
 			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
@@ -391,7 +390,7 @@
 		>;
 	};
 
-	pinctrl_uart3_2wires: uart3grp-2wires {
+	pinctrl_uart3_2wires: uart3-2wires-grp {
 		fsl,pins = <
 			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x1b0b1
 			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x1b0b1
diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsom.dtsi
index b5781c3656d1..9cc3eebb6b05 100644
--- a/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-ccimx6ulsom.dtsi
@@ -114,7 +114,6 @@
 			};
 
 			vdda_adc_3v3: vldo1 {
-				compatible = "regulator-fixed";
 				regulator-name = "vref-adc-3v3";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
@@ -158,7 +157,7 @@
 				regulator-max-microvolt = <3300000>;
 			};
 
-			vcoin_chg: vcoin {
+			vcoin_chg: coin {
 				regulator-min-microvolt = <2500000>;
 				regulator-max-microvolt = <3300000>;
 			};
@@ -233,7 +232,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_sleep: usdhc1grp-sleep {
+	pinctrl_usdhc1_sleep: usdhc1-sleep-grp {
 		fsl,pins = <
 			MX6UL_PAD_SD1_CMD__GPIO2_IO16           0x3000
 			MX6UL_PAD_SD1_CLK__GPIO2_IO17           0x3000
@@ -251,7 +250,7 @@
 		>;
 	};
 
-	pinctrl_wifibt_ctrl_sleep: wifibt-ctrl-grp-sleep {
+	pinctrl_wifibt_ctrl_sleep: wifibt-ctrl-sleep-grp {
 		fsl,pins = <
 			MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00      0x3000
 			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09      0x3000
diff --git a/arch/arm/boot/dts/imx6ul-geam.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts
index a0097da03f38..2a6bb5ff808a 100644
--- a/arch/arm/boot/dts/imx6ul-geam.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts
@@ -21,7 +21,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm8 0 100000>;
+		pwms = <&pwm8 0 100000 0>;
 		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
 				     10 11 12 13 14 15 16 17 18 19
 				     20 21 22 23 24 25 26 27 28 29
@@ -148,7 +148,6 @@
 		reg = <0x0a>;
 		#sound-dai-cells = <0>;
 		clocks = <&clks IMX6UL_CLK_OSC>;
-		clock-names = "mclk";
 		VDDA-supply = <&reg_3p3v>;
 		VDDIO-supply = <&reg_3p3v>;
 		VDDD-supply = <&reg_1p8v>;
@@ -195,7 +194,6 @@
 };
 
 &pwm8 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm8>;
 	status = "okay";
@@ -204,7 +202,7 @@
 &tsc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_tsc>;
-	xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+	xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
 };
 
 &sai2 {
@@ -367,7 +365,7 @@
 	};
 
 	pinctrl_tsc: tscgrp {
-		fsl,pin = <
+		fsl,pins = <
 			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01	0xb0
 			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0xb0
 			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0xb0
@@ -412,7 +410,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+	pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
 		fsl,pins = <
 			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170b9
 			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100b9
@@ -423,7 +421,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
 		fsl,pins = <
 			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170f9
 			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100f9
diff --git a/arch/arm/boot/dts/imx6ul-imx6ull-opos6ul.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6ul.dtsi
index f2386dcb9ff2..dda4fa91b2f2 100644
--- a/arch/arm/boot/dts/imx6ul-imx6ull-opos6ul.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6ul.dtsi
@@ -40,6 +40,9 @@
 			reg = <1>;
 			interrupt-parent = <&gpio4>;
 			interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+			micrel,led-mode = <1>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
 			status = "okay";
 		};
 	};
diff --git a/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi
index 935a77d717a6..be3cacb4fa7a 100644
--- a/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi
@@ -9,7 +9,7 @@
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 191000>;
+		pwms = <&pwm3 0 191000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		power-supply = <&reg_5v>;
@@ -114,18 +114,6 @@
 	pinctrl-0 = <&pinctrl_ecspi4>;
 	cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>, <&gpio4 3 GPIO_ACTIVE_LOW>;
 	status = "okay";
-
-	spidev0: spi@0 {
-		compatible = "spidev";
-		reg = <0>;
-		spi-max-frequency = <5000000>;
-	};
-
-	spidev1: spi@1 {
-		compatible = "spidev";
-		reg = <1>;
-		spi-max-frequency = <5000000>;
-	};
 };
 
 &i2c1 {
@@ -155,7 +143,6 @@
 };
 
 &pwm3 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";
@@ -168,7 +155,7 @@
 &tsc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_tsc>;
-	xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+	xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
 	measure-delay-time = <0xffff>;
 	pre-charge-time = <0xffff>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6ul-isiot-emmc.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-isiot-emmc.dts
index 1df3e376ae2c..1df3e376ae2c 100644
--- a/arch/arm/boot/dts/imx6ul-isiot-emmc.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-isiot-emmc.dts
diff --git a/arch/arm/boot/dts/imx6ul-isiot-nand.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-isiot-nand.dts
index 8c26d4d1a7bf..8c26d4d1a7bf 100644
--- a/arch/arm/boot/dts/imx6ul-isiot-nand.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-isiot-nand.dts
diff --git a/arch/arm/boot/dts/imx6ul-isiot.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-isiot.dtsi
index 14fc4828ba4e..e34c8cbe36ae 100644
--- a/arch/arm/boot/dts/imx6ul-isiot.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-isiot.dtsi
@@ -20,7 +20,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm8 0 100000>;
+		pwms = <&pwm8 0 100000 0>;
 		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
 				     10 11 12 13 14 15 16 17 18 19
 				     20 21 22 23 24 25 26 27 28 29
@@ -122,15 +122,21 @@
 		VDDD-supply = <&reg_1p8v>;
 	};
 
-	stmpe811: gpio-expander@44 {
+	gpio-expander@44 {
 		compatible = "st,stmpe811";
 		reg = <0x44>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_stmpe>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
+
+		gpio {
+			compatible = "st,stmpe-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
 
 		stmpe: touchscreen {
 			compatible = "st,stmpe-ts";
@@ -187,7 +193,6 @@
 };
 
 &pwm8 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm8>;
 	status = "okay";
@@ -323,7 +328,7 @@
 		>;
 	};
 
-	pinctrl_stmpe: stmpegrp  {
+	pinctrl_stmpe: stmpegrp {
 		fsl,pins = <
 			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x1b0b0
 		>;
@@ -347,7 +352,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+	pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
 		fsl,pins = <
 			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170b9
 			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100b9
@@ -358,7 +363,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
 		fsl,pins = <
 			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170f9
 			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100f9
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-43.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-43.dts
new file mode 100644
index 000000000000..4e8191a65211
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-43.dts
@@ -0,0 +1,102 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#include "imx6ul-kontron-bl.dts"
+
+/ {
+	model = "Kontron BL i.MX6UL 43 (N631X S 43)";
+	compatible = "kontron,bl-imx6ul-43", "kontron,bl-imx6ul",
+		     "kontron,sl-imx6ul", "fsl,imx6ul";
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm7 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+};
+
+&i2c4 {
+	touchscreen@5d {
+		compatible = "goodix,gt928";
+		reg = <0x5d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cap_touch>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
+		irq-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>;
+	/* Leave status disabled because of missing display panel node */
+};
+
+&pwm7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm7>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_cap_touch: captouchgrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x1b0b0 /* Touch Interrupt */
+			MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x1b0b0 /* Touch Reset */
+			MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x1b0b0 /* Touch Wake */
+		>;
+	};
+
+	pinctrl_lcdif_ctrl: lcdifctrlgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x79
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x79
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x79
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x79
+			MX6UL_PAD_LCD_RESET__LCDIF_RESET	0x79
+		>;
+	};
+
+	pinctrl_lcdif_dat: lcdifdatgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00	0x79
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01	0x79
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x79
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x79
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x79
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x79
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x79
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x79
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08	0x79
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09	0x79
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x79
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x79
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x79
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x79
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x79
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x79
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16	0x79
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17	0x79
+			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18	0x79
+			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19	0x79
+			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20	0x79
+			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21	0x79
+			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22	0x79
+			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23	0x79
+		>;
+	};
+
+	pinctrl_pwm7: pwm7grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_VSYNC__PWM7_OUT		0x110b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-common.dtsi
new file mode 100644
index 000000000000..f4c45e964daf
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-common.dtsi
@@ -0,0 +1,403 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led1 {
+			label = "debug-led1";
+			gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led2 {
+			label = "debug-led2";
+			gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led3 {
+			label = "debug-led3";
+			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	pwm-beeper {
+		compatible = "pwm-beeper";
+		pwms = <&pwm8 0 5000 0>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_vref_adc: regulator-vref-adc {
+		compatible = "regulator-fixed";
+		regulator-name = "vref-adc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&adc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc1>;
+	vref-supply = <&reg_vref_adc>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	eeprom@0 {
+		compatible = "anvo,anv32e61w", "atmel,at25";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		spi-cpha;
+		spi-cpol;
+		pagesize = <1>;
+		size = <8192>;
+		address-width = <16>;
+	};
+};
+
+&fec1 {
+	pinctrl-0 = <&pinctrl_enet1>;
+	/delete-node/ mdio;
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy2>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+			micrel,led-mode = <0>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
+		};
+
+		ethphy2: ethernet-phy@2 {
+			reg = <2>;
+			micrel,led-mode = <0>;
+			clocks = <&clks IMX6UL_CLK_ENET2_REF>;
+			clock-names = "rmii-ref";
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+};
+
+&pwm8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm8>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	linux,rs485-enabled-at-boot-time;
+	rs485-rx-during-tx;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	dr_mode = "otg";
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	over-current-active-low;
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	vbus-supply = <&reg_5v>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_3v3>;
+	voltage-ranges = <3300 3300>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	non-removable;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_3v3>;
+	voltage-ranges = <3300 3300>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_reset_out &pinctrl_gpio>;
+
+	pinctrl_adc1: adc1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0xb0
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0xb0
+			MX6UL_PAD_GPIO1_IO08__GPIO1_IO08	0xb0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA07__ECSPI1_MISO	0x100b1
+			MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI	0x100b1
+			MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK	0x100b1
+			MX6UL_PAD_CSI_DATA05__GPIO4_IO26	0x100b1	/* ECSPI1-CS1 */
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b009
+		>;
+	};
+
+	pinctrl_enet2_mdio: enet2mdiogrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
+			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
+		>;
+	};
+
+	pinctrl_gpio: gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x1b0b0	/* DOUT1 */
+			MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x1b0b0	/* DIN1 */
+			MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x1b0b0	/* DOUT2 */
+			MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x1b0b0	/* DIN2 */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30	0x1b0b0	/* LED H14 */
+			MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x1b0b0	/* LED H15 */
+			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x1b0b0	/* LED H16 */
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_PIXCLK__I2C1_SCL		0x4001b8b0
+			MX6UL_PAD_CSI_MCLK__I2C1_SDA		0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__I2C4_SCL	0x4001f8b0
+			MX6UL_PAD_UART2_RX_DATA__I2C4_SDA	0x4001f8b0
+		>;
+	};
+
+	pinctrl_pwm8: pwm8grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_HSYNC__PWM8_OUT		0x110b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_DATA04__UART2_DCE_TX	0x1b0b1
+			MX6UL_PAD_NAND_DATA05__UART2_DCE_RX	0x1b0b1
+			MX6UL_PAD_NAND_DATA06__UART2_DCE_CTS	0x1b0b1
+			/*
+			 * mux unused RTS to make sure it doesn't cause
+			 * any interrupts when it is undefined
+			 */
+			MX6UL_PAD_NAND_DATA07__UART2_DCE_RTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x1b0b1
+			MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS	0x1b0b1
+			MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x100b1	/* SD1_CD */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x10059
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100b9
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170b9
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170b9
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170b9
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170b9
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100f9
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170f9
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170f9
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170f9
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170f9
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170f9
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl.dts
new file mode 100644
index 000000000000..dadf6d3d5f52
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "imx6ul-kontron-sl.dtsi"
+#include "imx6ul-kontron-bl-common.dtsi"
+
+/ {
+	model = "Kontron BL i.MX6UL (N631X S)";
+	compatible = "kontron,bl-imx6ul", "kontron,sl-imx6ul", "fsl,imx6ul";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-sl-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-sl-common.dtsi
new file mode 100644
index 000000000000..4c0ac4d4df68
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-sl-common.dtsi
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x10000000>;
+		device_type = "memory";
+	};
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "mxicy,mx25v8035f", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				reg = <0x0 0xf0000>;
+				label = "u-boot";
+			};
+
+			partition@f0000 {
+				reg = <0xf0000 0x8000>;
+				label = "env";
+			};
+
+			partition@f8000 {
+				reg = <0xf8000 0x8000>;
+				label = "env_redundant";
+			};
+		};
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+			micrel,led-mode = <0>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
+		};
+	};
+};
+
+&fec2 {
+	phy-mode = "rmii";
+	status = "disabled";
+};
+
+&qspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-nand";
+		spi-max-frequency = <104000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		reg = <0>;
+	};
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_reset_out>;
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA03__ECSPI2_MISO      0x100b1
+			MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI      0x100b1
+			MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK      0x100b1
+			MX6UL_PAD_CSI_DATA01__GPIO4_IO22       0x100b1
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN      0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER      0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN      0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1  0x4001b009
+		>;
+	};
+
+	pinctrl_enet1_mdio: enet1mdiogrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC         0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO        0x1b0b0
+		>;
+	};
+
+	pinctrl_qspi: qspigrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK        0x70a1
+			MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00   0x70a1
+			MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01     0x70a1
+			MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02     0x70a1
+			MX6UL_PAD_NAND_CLE__QSPI_A_DATA03       0x70a1
+			MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B        0x70a1
+		>;
+	};
+
+	pinctrl_reset_out: rstoutgrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09      0x1b0b0
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY    0x18b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-sl.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-sl.dtsi
new file mode 100644
index 000000000000..0580d043e5ae
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-kontron-sl.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#include "imx6ul.dtsi"
+#include "imx6ul-kontron-sl-common.dtsi"
+
+/ {
+	model = "Kontron SL i.MX6UL (N631X SOM)";
+	compatible = "kontron,sl-imx6ul", "fsl,imx6ul";
+};
diff --git a/arch/arm/boot/dts/imx6ul-liteboard.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-liteboard.dts
index 1d863a16bcf0..5e62272acfba 100644
--- a/arch/arm/boot/dts/imx6ul-liteboard.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-liteboard.dts
@@ -100,7 +100,7 @@
 		>;
 	};
 
-	pinctrl_usb_otg1_vbus: usb-otg1-vbus {
+	pinctrl_usb_otg1_vbus: usb-otg1-vbus-grp {
 		fsl,pins = <
 			MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08	0x79
 		>;
diff --git a/arch/arm/boot/dts/imx6ul-litesom.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-litesom.dtsi
index 8d6893210842..8d6893210842 100644
--- a/arch/arm/boot/dts/imx6ul-litesom.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-litesom.dtsi
diff --git a/arch/arm/boot/dts/imx6ul-opos6ul.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-opos6ul.dtsi
index 6ce84f92b027..6ce84f92b027 100644
--- a/arch/arm/boot/dts/imx6ul-opos6ul.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-opos6ul.dtsi
diff --git a/arch/arm/boot/dts/imx6ul-opos6uldev.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-opos6uldev.dts
index 375b98d7205a..375b98d7205a 100644
--- a/arch/arm/boot/dts/imx6ul-opos6uldev.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-opos6uldev.dts
diff --git a/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-phycore-som.dtsi
index 19a062635ff6..a3ea1b208462 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-phycore-som.dtsi
@@ -30,7 +30,7 @@
 		pinctrl-0 = <&pinctrl_gpioleds_som>;
 		compatible = "gpio-leds";
 
-		phycore-green {
+		led-phycore-green {
 			gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
@@ -68,8 +68,11 @@
 };
 
 &i2c1 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	clock-frequency = <100000>;
 	status = "okay";
 
@@ -99,6 +102,10 @@
 	status = "disabled";
 };
 
+&wdog1 {
+	fsl,suspend-in-wait;
+};
+
 &iomuxc {
 	pinctrl_enet1: enet1grp {
 		fsl,pins = <
@@ -147,6 +154,13 @@
 		>;
 	};
 
+	pinctrl_i2c1_gpio: i2cgpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28	0x4001b8b0
+			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29	0x4001b8b0
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-emmc.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-ff-rdk-emmc.dts
index cfc744f8fcad..cfc744f8fcad 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-emmc.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-ff-rdk-emmc.dts
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-ff-rdk-nand.dts
index bff98e676980..607eddc5030f 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-ff-rdk-nand.dts
@@ -10,6 +10,7 @@
 #include "imx6ul-phytec-segin.dtsi"
 #include "imx6ul-phytec-segin-peb-eval-01.dtsi"
 #include "imx6ul-phytec-segin-peb-av-02.dtsi"
+#include "imx6ul-phytec-segin-peb-wlbt-05.dtsi"
 
 / {
 	model = "PHYTEC phyBOARD-Segin i.MX6 UltraLite Full Featured with NAND";
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-av-02.dtsi
index 7cda6944501d..c6064f4c679b 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-av-02.dtsi
@@ -11,7 +11,7 @@
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <5>;
 		power-supply = <&reg_backlight_en>;
-		pwms = <&pwm3 0 5000000>;
+		pwms = <&pwm3 0 5000000 0>;
 		status = "disabled";
 	};
 
@@ -61,7 +61,7 @@
 		wakeup-source;
 		status = "disabled";
 
-		stmpe_touchscreen {
+		touchscreen {
 			compatible = "st,stmpe-ts";
 			st,sample-time = <4>;
 			st,mod-12b = <1>;
@@ -72,8 +72,8 @@
 			st,settling = <2>;
 			st,fraction-z = <7>;
 			st,i-drive = <1>;
-			touchscreen-inverted-x = <1>;
-			touchscreen-inverted-y = <1>;
+			touchscreen-inverted-x;
+			touchscreen-inverted-y;
 		};
 	};
 };
@@ -91,7 +91,6 @@
 };
 
 &pwm3 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "disabled";
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-peb-eval-01.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-eval-01.dtsi
index 2f3fd32a1167..113485e3397a 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-segin-peb-eval-01.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-eval-01.dtsi
@@ -8,12 +8,12 @@
 
 / {
 	gpio_keys: gpio-keys {
-		compatible = "gpio-key";
+		compatible = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 		status = "disabled";
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
@@ -29,13 +29,13 @@
 
 		user-led1 {
 			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
+			linux,default-trigger = "none";
 			default-state = "on";
 		};
 
 		user-led2 {
 			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
+			linux,default-trigger = "none";
 			default-state = "on";
 		};
 	};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-wlbt-05.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-wlbt-05.dtsi
new file mode 100644
index 000000000000..4a45fb784ff7
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-wlbt-05.dtsi
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2021 PHYTEC Messtechnik GmbH
+ * Author: Yunus Bas <y.bas@phytec.de>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	reg_wl_en: regulator-wl-en {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan_en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wl>;
+		gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		status = "disabled";
+	};
+};
+
+&iomuxc {
+	pinctrl_bt: btgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01	0x3031	/* BT ENABLE */
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0x3031	/* HOST WAKEUP */
+			MX6UL_PAD_JTAG_MOD__GPIO1_IO10		0x3031	/* DEV WAKEUP */
+		>;
+	};
+
+	pinctrl_uart2_bt: uart2-bt-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX   0x17059
+			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX   0x17059
+			MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS    0x17059
+			MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS    0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_wl: usdhc2-wl-grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA18__USDHC2_CMD    0x10051
+			MX6UL_PAD_LCD_DATA19__USDHC2_CLK    0x10061
+			MX6UL_PAD_LCD_DATA20__USDHC2_DATA0  0x10051
+			MX6UL_PAD_LCD_DATA21__USDHC2_DATA1  0x10051
+			MX6UL_PAD_LCD_DATA22__USDHC2_DATA2  0x10051
+			MX6UL_PAD_LCD_DATA23__USDHC2_DATA3  0x10051
+		>;
+	};
+
+	pinctrl_wl: wlgrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09  0x3031	/* WLAN ENABLE */
+		>;
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_bt &pinctrl_bt>;
+	uart-has-rtscts;
+	status = "disabled";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&usdhc2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2_wl>;
+	vmmc-supply = <&reg_wl_en>;
+	bus-width = <4>;
+	non-removable;
+	no-1-8-v;
+	status = "disabled";
+
+	brmcf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin.dtsi
index 95e4080dd0a6..bef5eb38a90d 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin.dtsi
@@ -83,11 +83,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_adc1>;
 	vref-supply = <&reg_adc1_vref_3v3>;
-	/*
-	 * driver can not separate a specific channel so we request 4 channels
-	 * here - we need only the fourth channel
-	 */
-	num-channels = <4>;
 	status = "disabled";
 };
 
@@ -191,6 +186,7 @@
 	no-1-8-v;
 	keep-power-in-suspend;
 	wakeup-source;
+	disable-wp;
 	status = "disabled";
 };
 
@@ -223,7 +219,7 @@
 		>;
 	};
 
-	pinctrl_flexcan1: flexcan1 {
+	pinctrl_flexcan1: flexcan1grp {
 		fsl,pins = <
 			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x0b0b0
 			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x0b0b0
@@ -279,7 +275,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+	pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
 		fsl,pins = <
 			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
 			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
@@ -290,7 +286,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
 		fsl,pins = <
 			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
 			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
diff --git a/arch/arm/boot/dts/imx6ul-pico-dwarf.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-pico-dwarf.dts
index 162dc259edc8..fbab126f95b9 100644
--- a/arch/arm/boot/dts/imx6ul-pico-dwarf.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-pico-dwarf.dts
@@ -32,7 +32,7 @@
 };
 
 &i2c2 {
-	clock_frequency = <100000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
@@ -40,6 +40,7 @@
 	sgtl5000: audio-codec@a {
 		reg = <0x0a>;
 		compatible = "fsl,sgtl5000";
+		#sound-dai-cells = <0>;
 		clocks = <&sys_mclk>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_3p3v>;
@@ -48,5 +49,7 @@
 	pressure-sensor@60 {
 		compatible = "fsl,mpl3115";
 		reg = <0x60>;
+		vdd-supply = <&reg_3p3v>;
+		vddio-supply = <&reg_3p3v>;
 	};
 };
diff --git a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-pico-hobbit.dts
index 09f7ffa9ad8c..bf7dbb4f1f3e 100644
--- a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-pico-hobbit.dts
@@ -51,6 +51,7 @@
 	sgtl5000: codec@a {
 		reg = <0x0a>;
 		compatible = "fsl,sgtl5000";
+		#sound-dai-cells = <0>;
 		clocks = <&sys_mclk>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_3p3v>;
diff --git a/arch/arm/boot/dts/imx6ul-pico-pi.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-pico-pi.dts
index 6cd7d5877d20..6cfc943a8fa3 100644
--- a/arch/arm/boot/dts/imx6ul-pico-pi.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-pico-pi.dts
@@ -51,6 +51,7 @@
 	sgtl5000: codec@a {
 		reg = <0x0a>;
 		compatible = "fsl,sgtl5000";
+		#sound-dai-cells = <0>;
 		clocks = <&sys_mclk>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_3p3v>;
diff --git a/arch/arm/boot/dts/imx6ul-pico.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi
index 357ffb2f5ad6..9fa5225994e3 100644
--- a/arch/arm/boot/dts/imx6ul-pico.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi
@@ -22,7 +22,7 @@
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 5000000>;
+		pwms = <&pwm3 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 		status = "okay";
@@ -76,6 +76,7 @@
 	panel {
 		compatible = "vxt,vl050-8048nt-c01";
 		backlight = <&backlight>;
+		power-supply = <&reg_3p3v>;
 
 		port {
 			panel_in: endpoint {
@@ -121,6 +122,8 @@
 			max-speed = <100>;
 			interrupt-parent = <&gpio5>;
 			interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
 		};
 	};
 };
@@ -131,7 +134,7 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pmic: pfuze3000@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze3000";
 		reg = <0x08>;
 
@@ -175,7 +178,6 @@
 };
 
 &pwm3 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6ul-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx6ul-pinfunc.h
index 380d2db13a9b..380d2db13a9b 100644
--- a/arch/arm/boot/dts/imx6ul-pinfunc.h
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-pinfunc.h
diff --git a/arch/arm/boot/dts/imx6ul-prti6g.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-prti6g.dts
index d62015701d0a..c3c50f51a5a8 100644
--- a/arch/arm/boot/dts/imx6ul-prti6g.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-prti6g.dts
@@ -26,6 +26,7 @@
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
+		clock-output-names = "enet1_ref_pad";
 	};
 
 	leds {
@@ -60,6 +61,13 @@
 	status = "okay";
 };
 
+&clks {
+	clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>, <&clock_ksz8081_out>;
+	clock-names = "ckil", "osc", "ipp_di0", "ipp_di1", "enet1_ref_pad";
+	assigned-clocks = <&clks IMX6UL_CLK_ENET1_REF_SEL>;
+	assigned-clock-parents = <&clock_ksz8081_out>;
+};
+
 &ecspi1 {
 	cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
@@ -78,12 +86,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi2>;
 	status = "okay";
-
-	spi@0 {
-		compatible = "spidev";
-		reg = <0>;
-		spi-max-frequency = <1000000>;
-	};
 };
 
 &fec1 {
@@ -91,12 +93,6 @@
 	pinctrl-0 = <&pinctrl_eth1>;
 	phy-mode = "rmii";
 	phy-handle = <&rmii_phy>;
-	clocks = <&clks IMX6UL_CLK_ENET>,
-		 <&clks IMX6UL_CLK_ENET_AHB>,
-		 <&clks IMX6UL_CLK_ENET_PTP>,
-		 <&clock_ksz8081_out>;
-	clock-names = "ipg", "ahb", "ptp",
-		      "enet_clk_ref";
 	status = "okay";
 
 	mdio {
@@ -181,6 +177,7 @@
 
 &usbotg1 {
 	dr_mode = "host";
+	over-current-active-low;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul-common.dtsi
new file mode 100644
index 000000000000..2dd635a615cb
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul-common.dtsi
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/*
+ * Common for
+ * - TQMa6ULx
+ * - TQMa6ULxL
+ * - TQMa6ULLx
+ * - TQMa6ULLxL
+ */
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_recovery>;
+	scl-gpios = <&gpio1 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pfuze3000: pmic@8 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			reg_sw1a: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-ramp-delay = <6250>;
+				/* not used */
+			};
+
+			reg_sw1b_core: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			reg_sw2: sw2 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			reg_sw3_ddr: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_swbst: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+				/* not used */
+			};
+
+			reg_snvs_3v0: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vrefddr: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vccsd: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			reg_v33_3v3: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			reg_vldo1_3v3: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				/* not used */
+			};
+
+			reg_vldo2: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				/* not used */
+			};
+
+			reg_vldo3: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				/* not used */
+			};
+
+			reg_vldo4: vldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	jc42_1a: eeprom-temperature@1a {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1a>;
+	};
+
+	m24c64_50: eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	m24c02_52: eeprom@52 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+		read-only;
+	};
+
+	rtc0: rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pmic>;
+
+	/*
+	 * PMIC & temperature sensor IRQ
+	 * Both do currently not use IRQ
+	 * potentially dangerous if used on baseboard
+	 */
+	pmic-int-hog {
+		gpio-hog;
+		gpios = <24 0>;
+		input;
+	};
+};
+
+&qspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <33000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		vcc-supply = <&reg_vldo4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+};
+
+/* eMMC */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz" , "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+
+	bus-width = <8>;
+	disable-wp;
+	non-removable;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__I2C4_SCL	0x4001b8b0
+			MX6UL_PAD_UART2_RX_DATA__I2C4_SDA	0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c4_recovery: i2c4recoverygrp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20	0x4001b8b0
+			MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21	0x4001b8b0
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			/* PMIC irq */
+			MX6UL_PAD_CSI_DATA03__GPIO4_IO24	0x1b099
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul1-mba6ulx.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul1-mba6ulx.dts
new file mode 100644
index 000000000000..2e7b96e7b791
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul1-mba6ulx.dts
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/dts-v1/;
+
+#include "imx6ul-tqma6ul2.dtsi"
+#include "mba6ulx.dtsi"
+#include "imx6ul-tqma6ul1.dtsi"
+
+/ {
+	model = "TQ-Systems TQMa6UL1 SoM on MBa6ULx board";
+	compatible = "tq,imx6ul-tqma6ul1-mba6ulx", "tq,imx6ul-tqma6ul1", "fsl,imx6ul";
+};
+
+/*
+ * Note: can2 and fec2 are enabled on mba6ulx level (for i.MX6ULG2 usage)
+ * and need to be disabled here again
+ */
+&can2 {
+	status = "disabled";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>, <&pinctrl_enet1_mdc>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			max-speed = <100>;
+			reg = <0>;
+		};
+	};
+};
+
+&fec2 {
+	/delete-property/ phy-handle;
+	/delete-node/ mdio;
+};
+
+&iomuxc {
+	pinctrl_enet1_mdc: enet1mdcgrp {
+		fsl,pins = <
+			/* mdio */
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul1.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul1.dtsi
new file mode 100644
index 000000000000..79c8c5529135
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul1.dtsi
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/ {
+	model = "TQ-Systems TQMa6UL1 SoM";
+	compatible = "tq,imx6ul-tqma6ul1", "fsl,imx6ul";
+};
+
+/*
+ * There are no module specific differences compared to TQMa6UL2,
+ * only external interfaces differ
+ */
+
+/*
+ * Devices not available on i.MX6ULG1 and should not be enabled on
+ * mainboard level (again)
+ */
+&can2 {
+	status = "disabled";
+};
+
+&csi {
+	status = "disabled";
+};
+
+&fec2 {
+	status = "disabled";
+};
+
+&lcdif {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2-mba6ulx.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2-mba6ulx.dts
new file mode 100644
index 000000000000..0757df2b8f48
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2-mba6ulx.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/dts-v1/;
+
+#include "imx6ul-tqma6ul2.dtsi"
+#include "mba6ulx.dtsi"
+
+/ {
+	model = "TQ-Systems TQMa6ULx SoM on MBa6ULx board";
+	compatible = "tq,imx6ul-tqma6ul2-mba6ulx", "tq,imx6ul-tqma6ul2", "fsl,imx6ul";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2.dtsi
new file mode 100644
index 000000000000..e2e95dd92263
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2.dtsi
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include "imx6ul.dtsi"
+#include "imx6ul-tqma6ul-common.dtsi"
+#include "imx6ul-tqma6ulx-common.dtsi"
+
+/ {
+	model = "TQ-Systems TQMa6UL2 SoM";
+	compatible = "tq,imx6ul-tqma6ul2", "fsl,imx6ul";
+};
+
+&usdhc2 {
+	fsl,tuning-step = <6>;
+};
+
+&iomuxc {
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x00017051
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x00017051
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x00017051
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x00017051
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x00017051
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x00017051
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x00017051
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x00017051
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x00017051
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x00017051
+			/* rst */
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x000170e1
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x000170f1
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x000170f1
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x000170f1
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x000170f1
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x000170f1
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x000170f1
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x000170f1
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x000170f1
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x000170f1
+			/* rst */
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x000170f1
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x000170e1
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x000170e1
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x000170e1
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x000170e1
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x000170e1
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x000170e1
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x000170e1
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x000170e1
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x000170e1
+			/* rst */
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2l-mba6ulx.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2l-mba6ulx.dts
new file mode 100644
index 000000000000..9d9b6b744a1c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2l-mba6ulx.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/dts-v1/;
+
+#include "imx6ul-tqma6ul2l.dtsi"
+#include "mba6ulx.dtsi"
+
+/ {
+	model = "TQ Systems TQMa6UL2L SoM on MBa6ULx board";
+	compatible = "tq,imx6ul-tqma6ul2l-mba6ulx", "tq,imx6ul-tqma6ul2l", "fsl,imx6ul";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2l.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2l.dtsi
new file mode 100644
index 000000000000..4b87e2dc70dc
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ul2l.dtsi
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include "imx6ul.dtsi"
+#include "imx6ul-tqma6ul-common.dtsi"
+#include "imx6ul-tqma6ulxl-common.dtsi"
+
+/ {
+	model = "TQ-Systems TQMa6UL2L SoM";
+	compatible = "tq,imx6ul-tqma6ul2l", "fsl,imx6ul";
+};
+
+&usdhc2 {
+	fsl,tuning-step = <6>;
+};
+
+&iomuxc {
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x00017051
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x00017051
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x00017051
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x00017051
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x00017051
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x00017051
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x00017051
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x00017051
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x00017051
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x00017051
+			/* rst */
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x000170e1
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x000170f1
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x000170f1
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x000170f1
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x000170f1
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x000170f1
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x000170f1
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x000170f1
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x000170f1
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x000170f1
+			/* rst */
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x000170f9
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x000170f1
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x000170f1
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x000170f1
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x000170f1
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x000170f1
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x000170f1
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x000170f1
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x000170f1
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x000170f1
+			/* rst */
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ulx-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ulx-common.dtsi
new file mode 100644
index 000000000000..5afb9046c202
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ulx-common.dtsi
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/*
+ * Common for
+ * - TQMa6ULx
+ * - TQMa6ULLx
+ */
+
+&m24c64_50 {
+	vcc-supply = <&reg_sw2>;
+};
+
+&m24c02_52 {
+	vcc-supply = <&reg_sw2>;
+};
+
+&reg_sw2 {
+	regulator-boot-on;
+	regulator-always-on;
+};
+
+/* eMMC */
+&usdhc2 {
+	vmmc-supply = <&reg_sw2>;
+	vqmmc-supply = <&reg_vldo4>;
+};
+
+&iomuxc {
+	pinctrl_qspi: qspigrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK      0x70b9
+			MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70b9
+			MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01   0x70b9
+			MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02   0x70b9
+			MX6UL_PAD_NAND_CLE__QSPI_A_DATA03     0x70b9
+			MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B      0x70a1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ulxl-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ulxl-common.dtsi
new file mode 100644
index 000000000000..ba84a4f70ebd
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tqma6ulxl-common.dtsi
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/*
+ * Common for
+ * - TQMa6ULxL
+ * - TQMa6ULLxL
+ */
+
+/ {
+	reg_vin: reg-vin {
+		compatible = "regulator-fixed";
+		regulator-name = "VIN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&m24c64_50 {
+	vcc-supply = <&reg_vin>;
+};
+
+&m24c02_52 {
+	vcc-supply = <&reg_vin>;
+};
+
+/* eMMC */
+&usdhc2 {
+	vmmc-supply = <&reg_vin>;
+	vqmmc-supply = <&reg_vldo4>;
+};
+
+&iomuxc {
+	pinctrl_qspi: qspigrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK      0x70a9
+			MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70a9
+			MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01   0x70a9
+			MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02   0x70a9
+			MX6UL_PAD_NAND_CLE__QSPI_A_DATA03     0x70a9
+			MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B      0x70a1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-0010.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-0010.dts
new file mode 100644
index 000000000000..188f3a2a312f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-0010.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6ul.dtsi"
+#include "imx6ul-tx6ul.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TXUL-0010 Module";
+	compatible = "karo,imx6ul-tx6ul", "fsl,imx6ul";
+
+	aliases {
+		/delete-property/ mmc1;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-0011.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-0011.dts
new file mode 100644
index 000000000000..247a0aab7791
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-0011.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6ul.dtsi"
+#include "imx6ul-tx6ul.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TXUL-0011 Module";
+	compatible = "karo,imx6ul-tx6ul", "fsl,imx6ul";
+
+	aliases {
+		mmc0 = &usdhc2;
+		mmc1 = &usdhc1;
+	};
+};
+
+&gpmi {
+	status = "disabled";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	no-1-8-v;
+	non-removable;
+	fsl,wp-controller;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-mainboard.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-mainboard.dts
new file mode 100644
index 000000000000..84b45542814e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul-mainboard.dts
@@ -0,0 +1,235 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+/dts-v1/;
+#include "imx6ul.dtsi"
+#include "imx6ul-tx6ul.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TXUL-0010 Module on TXUL Mainboard";
+	compatible = "karo,imx6ul-tx6ul", "fsl,imx6ul";
+
+	aliases {
+		lcdif-24bit-pins-a = &pinctrl_disp0_3;
+		mmc0 = &usdhc1;
+		/delete-property/ mmc1;
+		serial2 = &uart3;
+		serial4 = &uart5;
+	};
+	/delete-node/ sound;
+};
+
+&can1 {
+	xceiver-supply = <&reg_3v3>;
+};
+
+&can2 {
+	xceiver-supply = <&reg_3v3>;
+};
+
+&ds1339 {
+	status = "disabled";
+};
+
+&fec1 {
+	pinctrl-0 = <&pinctrl_enet1 &pinctrl_etnphy0_rst>;
+	/delete-node/ mdio;
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio &pinctrl_etnphy1_rst>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+	phy-supply = <&reg_3v3_etn>;
+	phy-handle = <&etnphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		etnphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_etnphy0_int>;
+			interrupt-parent = <&gpio5>;
+			interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+			interrupts-extended = <&gpio5 5 IRQ_TYPE_EDGE_FALLING>;
+			status = "okay";
+		};
+
+		etnphy1: ethernet-phy@2 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_etnphy1_int>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+			interrupts-extended = <&gpio4 27 IRQ_TYPE_EDGE_FALLING>;
+			status = "okay";
+		};
+	};
+};
+
+&i2c_gpio {
+	status = "disabled";
+};
+
+&i2c2 {
+	/delete-node/ codec@a;
+	/delete-node/ touchscreen@48;
+
+	rtc: rtc@6f {
+		compatible = "microchip,mcp7940x";
+		reg = <0x6f>;
+	};
+};
+
+&kpp {
+	status = "disabled";
+};
+
+&lcdif {
+	pinctrl-0 = <&pinctrl_disp0_3>;
+};
+
+&reg_usbotg_vbus {
+	status = "disabled";
+};
+
+&usdhc1 {
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	non-removable;
+	/delete-property/ cd-gpios;
+	cap-sdio-irq;
+};
+
+&uart1 {
+	pinctrl-0 = <&pinctrl_uart1>;
+	/delete-property/ uart-has-rtscts;
+};
+
+&uart2 {
+	pinctrl-0 = <&pinctrl_uart2>;
+	/delete-property/ uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart7>;
+	status = "okay";
+};
+
+&uart8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart8>;
+	status = "disabled"; /* conflicts with LCDIF */
+};
+
+&iomuxc {
+	hoggrp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA01__GPIO4_IO22	0x0b0b0 /* WLAN_RESET */
+		>;
+	};
+
+	pinctrl_disp0_3: disp0-3-grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x10 /* LSCLK */
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x10 /* OE_ACD */
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x10 /* HSYNC */
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x10 /* VSYNC */
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x10
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x10
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x10
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x10
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x10
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x10
+			/* LCD_DATA08..09 not wired */
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x10
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x10
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x10
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x10
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x10
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x10
+			/* LCD_DATA16..17 not wired */
+			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18	0x10
+			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19	0x10
+			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20	0x10
+			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21	0x10
+			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22	0x10
+			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23	0x10
+		>;
+	};
+
+	pinctrl_enet2_mdio: enet2-mdiogrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x0b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x0b0b0
+			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x0b0b0
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX	0x0b0b0
+			MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX	0x0b0b0
+		>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_MCLK__UART6_DCE_TX	0x0b0b0
+			MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX	0x0b0b0
+		>;
+	};
+
+	pinctrl_uart7: uart7grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA16__UART7_DCE_TX	0x0b0b0
+			MX6UL_PAD_LCD_DATA17__UART7_DCE_RX	0x0b0b0
+		>;
+	};
+
+	pinctrl_uart8: uart8grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA20__UART8_DCE_TX	0x0b0b0
+			MX6UL_PAD_LCD_DATA21__UART8_DCE_RX	0x0b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi
index 938a32ced88d..1992dfb53b45 100644
--- a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/gpio/gpio.h>
@@ -108,16 +72,14 @@
 		default-brightness-level = <50>;
 	};
 
-	i2c_gpio: i2c-gpio {
+	i2c_gpio: i2c {
 		compatible = "i2c-gpio";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c_gpio>;
-		gpios = <
-			&gpio5 1 GPIO_ACTIVE_HIGH /* SDA */
-			&gpio5 0 GPIO_ACTIVE_HIGH /* SCL */
-		>;
+		sda-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;
 		clock-frequency = <400000>;
 		status = "okay";
 
@@ -131,7 +93,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		user_led: user {
+		user_led: led-user {
 			label = "Heartbeat";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_led>;
@@ -212,33 +174,21 @@
 		enable-active-high;
 	};
 
-	spi_gpio: spi-gpio {
+	spi_gpio: spi {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "spi-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_spi_gpio>;
-		gpio-mosi = <&gpio1 30 GPIO_ACTIVE_HIGH>;
-		gpio-miso = <&gpio1 31 GPIO_ACTIVE_HIGH>;
-		gpio-sck = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+		sck-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <2>;
 		cs-gpios = <
 			&gpio1 29 GPIO_ACTIVE_HIGH
 			&gpio1 10 GPIO_ACTIVE_HIGH
 		>;
 		status = "disabled";
-
-		spi@0 {
-			compatible = "spidev";
-			reg = <0>;
-			spi-max-frequency = <660000>;
-		};
-
-		spi@1 {
-			compatible = "spidev";
-			reg = <1>;
-			spi-max-frequency = <660000>;
-		};
 	};
 
 	sound {
@@ -290,25 +240,12 @@
 		&gpio1 10 GPIO_ACTIVE_HIGH
 	>;
 	status = "disabled";
-
-	spidev0: spi@0 {
-		compatible = "spidev";
-		reg = <0>;
-		spi-max-frequency = <60000000>;
-	};
-
-	spidev1: spi@1 {
-		compatible = "spidev";
-		reg = <1>;
-		spi-max-frequency = <60000000>;
-	};
 };
 
 &fec1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio &pinctrl_etnphy0_rst>;
 	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
 	phy-supply = <&reg_3v3_etn>;
 	phy-handle = <&etnphy0>;
 	status = "okay";
@@ -324,6 +261,11 @@
 			pinctrl-0 = <&pinctrl_etnphy0_int>;
 			interrupt-parent = <&gpio5>;
 			interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <100>;
+			reset-deassert-us = <25000>;
+			/* Energy detect sometimes causes link failures */
+			smsc,disable-energy-detect;
 			status = "okay";
 		};
 
@@ -334,6 +276,9 @@
 			pinctrl-0 = <&pinctrl_etnphy1_int>;
 			interrupt-parent = <&gpio4>;
 			interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <100>;
+			reset-deassert-us = <25000>;
 			status = "okay";
 		};
 	};
@@ -343,7 +288,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet2 &pinctrl_etnphy1_rst>;
 	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
 	phy-supply = <&reg_3v3_etn>;
 	phy-handle = <&etnphy1>;
 	status = "disabled";
@@ -431,7 +375,7 @@
 		status = "okay";
 
 		display-timings {
-			VGA {
+			timing-vga {
 				clock-frequency = <25200000>;
 				hactive = <640>;
 				vactive = <480>;
@@ -447,7 +391,7 @@
 				pixelclk-active = <1>;
 			};
 
-			ETV570 {
+			timing-etv570 {
 				clock-frequency = <25200000>;
 				hactive = <640>;
 				vactive = <480>;
@@ -463,7 +407,7 @@
 				pixelclk-active = <1>;
 			};
 
-			ET0350 {
+			timing-et0350 {
 				clock-frequency = <6413760>;
 				hactive = <320>;
 				vactive = <240>;
@@ -479,7 +423,7 @@
 				pixelclk-active = <1>;
 			};
 
-			ET0430 {
+			timing-et0430 {
 				clock-frequency = <9009000>;
 				hactive = <480>;
 				vactive = <272>;
@@ -495,7 +439,7 @@
 				pixelclk-active = <0>;
 			};
 
-			ET0500 {
+			timing-et0500 {
 				clock-frequency = <33264000>;
 				hactive = <800>;
 				vactive = <480>;
@@ -511,7 +455,7 @@
 				pixelclk-active = <1>;
 			};
 
-			ET0700 { /* same as ET0500 */
+			timing-et0700 { /* same as ET0500 */
 				clock-frequency = <33264000>;
 				hactive = <800>;
 				vactive = <480>;
@@ -527,7 +471,7 @@
 				pixelclk-active = <1>;
 			};
 
-			ETQ570 {
+			timing-etq570 {
 				clock-frequency = <6596040>;
 				hactive = <320>;
 				vactive = <240>;
@@ -604,19 +548,13 @@
 };
 
 &iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	pinctrl_hog: hoggrp {
-	};
-
 	pinctrl_led: ledgrp {
 		fsl,pins = <
 			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x0b0b0 /* LED */
 		>;
 	};
 
-	pinctrl_disp0_1: disp0grp-1 {
+	pinctrl_disp0_1: disp0-1-grp {
 		fsl,pins = <
 			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x10 /* LSCLK */
 			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x10 /* OE_ACD */
@@ -649,7 +587,7 @@
 		>;
 	};
 
-	pinctrl_disp0_2: disp0grp-2 {
+	pinctrl_disp0_2: disp0-2-grp {
 		fsl,pins = <
 			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x10 /* LSCLK */
 			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x10 /* OE_ACD */
@@ -739,25 +677,25 @@
 		>;
 	};
 
-	pinctrl_etnphy0_int: etnphy-intgrp-0 {
+	pinctrl_etnphy0_int: etnphy-int-0-grp {
 		fsl,pins = <
 			MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x0b0b0 /* ETN PHY INT */
 		>;
 	};
 
-	pinctrl_etnphy0_rst: etnphy-rstgrp-0 {
+	pinctrl_etnphy0_rst: etnphy-rst-0-grp {
 		fsl,pins = <
 			MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x0b0b0 /* ETN PHY RESET */
 		>;
 	};
 
-	pinctrl_etnphy1_int: etnphy-intgrp-1 {
+	pinctrl_etnphy1_int: etnphy-int-1-grp {
 		fsl,pins = <
 			MX6UL_PAD_CSI_DATA06__GPIO4_IO27	0x0b0b0 /* ETN PHY INT */
 		>;
 	};
 
-	pinctrl_etnphy1_rst: etnphy-rstgrp-1 {
+	pinctrl_etnphy1_rst: etnphy-rst-1-grp {
 		fsl,pins = <
 			MX6UL_PAD_CSI_DATA07__GPIO4_IO28	0x0b0b0 /* ETN PHY RESET */
 		>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto.dts
new file mode 100644
index 000000000000..9ff3b374a2b3
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som-concerto.dts
@@ -0,0 +1,320 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Support for Variscite MX6 Concerto Carrier board with the VAR-SOM-MX6UL
+ * Variscite SoM mounted on it
+ *
+ * Copyright 2019 Variscite Ltd.
+ * Copyright 2025 Bootlin
+ */
+
+#include "imx6ul-var-som.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Variscite VAR-SOM-MX6UL Concerto Board";
+	compatible = "variscite,mx6ulconcerto", "variscite,var-som-imx6ul", "fsl,imx6ul";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_key_back>, <&pinctrl_gpio_key_wakeup>;
+
+		key-back {
+			gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+		};
+
+		key-wakeup {
+			gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "gpled2";
+			gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&fec1 {
+	status = "disabled";
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>, <&pinctrl_enet2_gpio>, <&pinctrl_enet2_mdio>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@3 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <3>;
+			clocks = <&rmii_ref_clk>;
+			clock-names = "rmii-ref";
+			reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <100000>;
+			micrel,led-mode = <0>;
+			micrel,rmii-reference-clock-select-25-mhz = <1>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	rtc@68 {
+		/*
+		 * To actually use this interrupt
+		 * connect pins J14.8 & J14.10 on the Concerto-Board.
+		 */
+		compatible = "dallas,ds1337";
+		reg = <0x68>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&iomuxc {
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
+		>;
+	};
+
+	pinctrl_enet2_gpio: enet2-gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x1b0b0 /* fec2 reset */
+		>;
+	};
+
+	pinctrl_enet2_mdio: enet2-mdiogrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b020
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b020
+		>;
+	};
+
+	pinctrl_gpio_key_back: gpio-key-backgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_CE1_B__GPIO4_IO14	0x17059
+		>;
+	};
+
+	pinctrl_gpio_leds: gpio-ledsgrp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25	0x1b0b0	/* GPLED2 */
+		>;
+	};
+
+	pinctrl_gpio_key_wakeup: gpio-keys-wakeupgrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x17059
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_PIXCLK__I2C1_SCL		0x4001b8b0
+			MX6UL_PAD_CSI_MCLK__I2C1_SDA		0x4001b8b0
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO05__PWM4_OUT		0x110b0
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_MOD__GPIO1_IO10		0x1b0b0 /* RTC alarm IRQ */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA00__UART5_DCE_TX	0x1b0b1
+			MX6UL_PAD_CSI_DATA01__UART5_DCE_RX	0x1b0b1
+			MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS	0x1b0b1
+			MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_usb_otg1_id: usbotg1idgrp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_TX_DATA__ANATOP_OTG1_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x17059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc1_gpio: usdhc1-gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__GPIO1_IO00	0x1b0b1 /* CD */
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO01__WDOG1_WDOG_B	0x78b0
+		>;
+	};
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "disabled";
+};
+
+&snvs_rtc {
+	status = "disabled";
+};
+
+&tsc {
+	/*
+	 * Conflics with wdog1 ext-reset-output & SD CD pins,
+	 * so we keep it disabled by default.
+	 */
+	status = "disabled";
+};
+
+/* Console UART */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* ttymxc4 UART */
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1_id>;
+	dr_mode = "otg";
+	disable-over-current;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>;
+	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	/*
+	 * To actually use ext-reset-output
+	 * connect pins J17.3 & J17.8 on the Concerto-Board
+	 */
+	fsl,ext-reset-output;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-var-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som.dtsi
new file mode 100644
index 000000000000..4e536e0252de
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-var-som.dtsi
@@ -0,0 +1,233 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Support for Variscite VAR-SOM-MX6UL Module
+ *
+ * Copyright 2019 Variscite Ltd.
+ * Copyright 2025 Bootlin
+ */
+
+/dts-v1/;
+
+#include "imx6ul.dtsi"
+#include <dt-bindings/clock/imx6ul-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Variscite VAR-SOM-MX6UL module";
+	compatible = "variscite,var-som-imx6ul", "fsl,imx6ul";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reg_gpio_dvfs: reg-gpio-dvfs {
+		compatible = "regulator-gpio";
+		regulator-min-microvolt = <1300000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-name = "gpio_dvfs";
+		regulator-type = "voltage";
+		gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+		states = <1300000 0x1
+			  1400000 0x0>;
+	};
+
+	rmii_ref_clk: rmii-ref-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+		clock-output-names = "rmii-ref";
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <786432000>;
+};
+
+&cpu0 {
+	dc-supply = <&reg_gpio_dvfs>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>, <&pinctrl_enet1_gpio>, <&pinctrl_enet1_mdio>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			clocks = <&rmii_ref_clk>;
+			clock-names = "rmii-ref";
+			reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <100000>;
+			micrel,led-mode = <1>;
+			micrel,rmii-reference-clock-select-25-mhz = <1>;
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+		>;
+	};
+
+	pinctrl_enet1_gpio: enet1-gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x1b0b0 /* fec1 reset */
+		>;
+	};
+
+	pinctrl_enet1_mdio: enet1-mdiogrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x1b0b0	/* BT Enable */
+			MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x03029	/* WLAN Enable */
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
+			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
+			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x11088
+			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x11088
+			MX6UL_PAD_JTAG_TMS__SAI2_MCLK		0x17088
+		>;
+	};
+
+	pinctrl_tsc: tscgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01	0xb0
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0xb0
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0xb0
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0xb0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
+			MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS	0x1b0b1
+			MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x10069
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x17059
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x17059
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x17059
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100b9
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170b9
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170b9
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170b9
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170b9
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170b9
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x170b9
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x170b9
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x170b9
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100f9
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170f9
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170f9
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170f9
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170f9
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170f9
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x170f9
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x170f9
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x170f9
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x170f9
+		>;
+	};
+};
+
+&pxp {
+	status = "okay";
+};
+
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>,
+			  <&clks IMX6UL_CLK_SAI2>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <0>, <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&tsc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tsc>;
+	xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+	measure-delay-time = <0xffff>;
+	pre-charge-time = <0xfff>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi
index afeec01f6522..6eb80f867f50 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi
@@ -64,20 +64,18 @@
 			clock-frequency = <696000000>;
 			clock-latency = <61036>; /* two CLK32 periods */
 			#cooling-cells = <2>;
-			operating-points = <
+			operating-points =
 				/* kHz	uV */
-				696000	1275000
-				528000	1175000
-				396000	1025000
-				198000	950000
-			>;
-			fsl,soc-operating-points = <
+				<696000	1275000>,
+				<528000	1175000>,
+				<396000	1025000>,
+				<198000	950000>;
+			fsl,soc-operating-points =
 				/* KHz	uV */
-				696000	1275000
-				528000	1175000
-				396000	1175000
-				198000	1175000
-			>;
+				<696000	1275000>,
+				<528000	1175000>,
+				<396000	1175000>,
+				<198000	1175000>;
 			clocks = <&clks IMX6UL_CLK_ARM>,
 				 <&clks IMX6UL_CLK_PLL2_BUS>,
 				 <&clks IMX6UL_CLK_PLL2_PFD2>,
@@ -139,7 +137,7 @@
 		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
-	soc {
+	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
@@ -149,6 +147,9 @@
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 		};
 
 		intc: interrupt-controller@a01000 {
@@ -163,14 +164,13 @@
 			      <0x00a06000 0x2000>;
 		};
 
-		dma_apbh: dma-apbh@1804000 {
+		dma_apbh: dma-controller@1804000 {
 			compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
 			reg = <0x01804000 0x2000>;
 			interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>,
 				     <0 13 IRQ_TYPE_LEVEL_HIGH>,
 				     <0 13 IRQ_TYPE_LEVEL_HIGH>,
 				     <0 13 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
 			#dma-cells = <1>;
 			dma-channels = <4>;
 			clocks = <&clks IMX6UL_CLK_APBHDMA>;
@@ -179,7 +179,7 @@
 		gpmi: nand-controller@1806000 {
 			compatible = "fsl,imx6q-gpmi-nand";
 			#address-cells = <1>;
-			#size-cells = <1>;
+			#size-cells = <0>;
 			reg = <0x01806000 0x2000>, <0x01808000 0x2000>;
 			reg-names = "gpmi-nand", "bch";
 			interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
@@ -274,6 +274,8 @@
 					clocks = <&clks IMX6UL_CLK_UART7_IPG>,
 						 <&clks IMX6UL_CLK_UART7_SERIAL>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 43 4 0>, <&sdma 44 4 0>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
@@ -285,6 +287,8 @@
 					clocks = <&clks IMX6UL_CLK_UART1_IPG>,
 						 <&clks IMX6UL_CLK_UART1_SERIAL>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
@@ -296,6 +300,8 @@
 					clocks = <&clks IMX6UL_CLK_UART8_IPG>,
 						 <&clks IMX6UL_CLK_UART8_SERIAL>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 45 4 0>, <&sdma 46 4 0>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
@@ -333,7 +339,7 @@
 					#sound-dai-cells = <0>;
 					compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
 					reg = <0x02030000 0x4000>;
-					interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6UL_CLK_SAI3_IPG>,
 						 <&clks IMX6UL_CLK_SAI3>,
 						 <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>;
@@ -364,13 +370,13 @@
 						<&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
 					dma-names = "rxa", "rxb", "rxc",
 						    "txa", "txb", "txc";
-					fsl,asrc-rate  = <48000>;
+					fsl,asrc-rate = <48000>;
 					fsl,asrc-width = <16>;
 					status = "okay";
 				};
 			};
 
-			tsc: tsc@2040000 {
+			tsc: touchscreen@2040000 {
 				compatible = "fsl,imx6ul-tsc";
 				reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
 				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
@@ -531,19 +537,20 @@
 				clocks = <&clks IMX6UL_CLK_ENET>,
 					 <&clks IMX6UL_CLK_ENET_AHB>,
 					 <&clks IMX6UL_CLK_ENET_PTP>,
-					 <&clks IMX6UL_CLK_ENET2_REF_125M>,
-					 <&clks IMX6UL_CLK_ENET2_REF_125M>;
+					 <&clks IMX6UL_CLK_ENET2_REF_SEL>;
 				clock-names = "ipg", "ahb", "ptp",
-					      "enet_clk_ref", "enet_out";
+					      "enet_clk_ref";
 				fsl,num-tx-queues = <1>;
 				fsl,num-rx-queues = <1>;
 				fsl,stop-mode = <&gpr 0x10 4>;
 				fsl,magic-packet;
+				nvmem-cells = <&fec2_mac_addr>;
+				nvmem-cell-names = "mac-address";
 				status = "disabled";
 			};
 
 			kpp: keypad@20b8000 {
-				compatible = "fsl,imx6ul-kpp", "fsl,imx6q-kpp", "fsl,imx21-kpp";
+				compatible = "fsl,imx6ul-kpp", "fsl,imx21-kpp";
 				reg = <0x020b8000 0x4000>;
 				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6UL_CLK_KPP>;
@@ -639,6 +646,7 @@
 					nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
 					nvmem-cell-names = "calib", "temp_grade";
 					clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>;
+					#thermal-sensor-cells = <0>;
 				};
 			};
 
@@ -720,6 +728,18 @@
 				#interrupt-cells = <3>;
 				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&intc>;
+				clocks = <&clks IMX6UL_CLK_IPG>;
+				clock-names = "ipg";
+
+				pgc {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					power-domain@0 {
+						reg = <0>;
+						#power-domain-cells = <0>;
+					};
+				};
 			};
 
 			iomuxc: pinctrl@20e0000 {
@@ -743,7 +763,7 @@
 				status = "disabled";
 			};
 
-			sdma: sdma@20ec000 {
+			sdma: dma-controller@20ec000 {
 				compatible = "fsl,imx6ul-sdma", "fsl,imx6q-sdma",
 					     "fsl,imx35-sdma";
 				reg = <0x020ec000 0x4000>;
@@ -844,7 +864,6 @@
 				clocks = <&clks IMX6UL_CLK_USBOH3>;
 				fsl,usbphy = <&usbphy1>;
 				fsl,usbmisc = <&usbmisc 0>;
-				fsl,anatop = <&anatop>;
 				ahb-burst-config = <0x0>;
 				tx-burst-size-dword = <0x10>;
 				rx-burst-size-dword = <0x10>;
@@ -879,14 +898,15 @@
 				clocks = <&clks IMX6UL_CLK_ENET>,
 					 <&clks IMX6UL_CLK_ENET_AHB>,
 					 <&clks IMX6UL_CLK_ENET_PTP>,
-					 <&clks IMX6UL_CLK_ENET_REF>,
-					 <&clks IMX6UL_CLK_ENET_REF>;
+					 <&clks IMX6UL_CLK_ENET1_REF_SEL>;
 				clock-names = "ipg", "ahb", "ptp",
-					      "enet_clk_ref", "enet_out";
+					      "enet_clk_ref";
 				fsl,num-tx-queues = <1>;
 				fsl,num-rx-queues = <1>;
 				fsl,stop-mode = <&gpr 0x10 3>;
 				fsl,magic-packet;
+				nvmem-cells = <&fec1_mac_addr>;
+				nvmem-cell-names = "mac-address";
 				status = "disabled";
 			};
 
@@ -923,7 +943,6 @@
 				reg = <0x02198000 0x4000>;
 				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6UL_CLK_ADC1>;
-				num-channels = <2>;
 				clock-names = "adc";
 				fsl,adck-max-frequency = <30000000>, <40000000>,
 							 <20000000>;
@@ -966,7 +985,7 @@
 				clocks = <&clks IMX6UL_CLK_MMDC_P0_IPG>;
 			};
 
-			weim: weim@21b8000 {
+			weim: memory-controller@21b8000 {
 				#address-cells = <2>;
 				#size-cells = <1>;
 				compatible = "fsl,imx6ul-weim", "fsl,imx6q-weim";
@@ -995,10 +1014,18 @@
 				cpu_speed_grade: speed-grade@10 {
 					reg = <0x10 4>;
 				};
+
+				fec1_mac_addr: mac-addr@88 {
+					reg = <0x88 6>;
+				};
+
+				fec2_mac_addr: mac-addr@8e {
+					reg = <0x8e 6>;
+				};
 			};
 
 			csi: csi@21c4000 {
-				compatible = "fsl,imx6ul-csi", "fsl,imx7-csi";
+				compatible = "fsl,imx6ul-csi";
 				reg = <0x021c4000 0x4000>;
 				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6UL_CLK_CSI>;
@@ -1007,7 +1034,7 @@
 			};
 
 			lcdif: lcdif@21c8000 {
-				compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif";
+				compatible = "fsl,imx6ul-lcdif", "fsl,imx6sx-lcdif";
 				reg = <0x021c8000 0x4000>;
 				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6UL_CLK_LCDIF_PIX>,
@@ -1028,7 +1055,7 @@
 			qspi: spi@21e0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx6ul-qspi", "fsl,imx6sx-qspi";
+				compatible = "fsl,imx6ul-qspi";
 				reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>;
 				reg-names = "QuadSPI", "QuadSPI-memory";
 				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
@@ -1054,6 +1081,8 @@
 				clocks = <&clks IMX6UL_CLK_UART2_IPG>,
 					 <&clks IMX6UL_CLK_UART2_SERIAL>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -1065,6 +1094,8 @@
 				clocks = <&clks IMX6UL_CLK_UART3_IPG>,
 					 <&clks IMX6UL_CLK_UART3_SERIAL>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -1076,6 +1107,8 @@
 				clocks = <&clks IMX6UL_CLK_UART4_IPG>,
 					 <&clks IMX6UL_CLK_UART4_SERIAL>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -1087,6 +1120,8 @@
 				clocks = <&clks IMX6UL_CLK_UART5_IPG>,
 					 <&clks IMX6UL_CLK_UART5_SERIAL>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -1108,6 +1143,8 @@
 				clocks = <&clks IMX6UL_CLK_UART6_IPG>,
 					 <&clks IMX6UL_CLK_UART6_SERIAL>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma 0 4 0>, <&sdma 47 4 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 		};
diff --git a/arch/arm/boot/dts/imx6ull-14x14-evk.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-14x14-evk.dts
index 74aaa8a56a3d..74aaa8a56a3d 100644
--- a/arch/arm/boot/dts/imx6ull-14x14-evk.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-14x14-evk.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-aster.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-aster.dts
new file mode 100644
index 000000000000..3e0897c3a296
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-aster.dts
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017-2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-nonwifi.dtsi"
+#include "imx6ull-colibri-aster.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 256/512MB on Colibri Aster";
+	compatible = "toradex,colibri-imx6ull-aster",
+		     "toradex,colibri-imx6ull",
+		     "fsl,imx6ull";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+&atmel_mxt_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+/* PWM <B> */
+&pwm5 {
+	/* Pin already used by atmel_mxt_ts touchscreen */
+	status = "disabled";
+};
+
+/* PWM <C> */
+&pwm6 {
+	/* Pin already used by atmel_mxt_ts touchscreen */
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-aster.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-aster.dtsi
new file mode 100644
index 000000000000..e75dad0f0e23
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-aster.dtsi
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017-2022 Toradex
+ */
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_snvs_gpiokeys>;
+
+		key-power {
+			label = "Wake-Up";
+			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh_reg>;
+		regulator-name = "VCC_USB[1-4]";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		vin-supply = <&reg_5v0>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&ecspi1 {
+	status = "okay";
+
+	num-cs = <2>;
+	cs-gpios = <
+		&gpio3 26 GPIO_ACTIVE_HIGH /* SODIMM 86 LCD_DATA21 */
+		&gpio4 28 GPIO_ACTIVE_HIGH /* SODIMM 65 CSI_DATA07 */
+	>;
+};
+
+/*
+ * Following SODIMM Pins should not be accessed as GPIO on Aster board:
+ * 134 - AIN5_SCL (no connection)
+ * 127 - Voltage Level Translator OE# signal (IC11 and IC12)
+ *
+ * To configure GPIO to LED5, please disable FEC2 and uncomment the following:
+ *	&iomuxc {
+ *		pinctrl-names = "default";
+ *		pinctrl-0 = <
+ *			&pinctrl_gpio1
+ *			&pinctrl_gpio2
+ *			&pinctrl_gpio3
+ *			&pinctrl_gpio4
+ *			&pinctrl_gpio6 - for non-WiFi modules only
+ *			&pinctrl_gpio7
+ *			&pinctrl_gpio_aster
+ *		>;
+ *
+ *		pinctrl_gpio_aster: gpio-aster {
+ *			fsl,pins = <
+ *				MX6UL_PAD_GPIO1_IO07__GPIO1_IO07    0x1b0b0
+ *			>;
+ *		};
+ *  };
+ */
+
+&i2c1 {
+	status = "okay";
+
+	m41t0m6: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+/* PWM <A> */
+&pwm4 {
+	status = "okay";
+};
+
+/* PWM <B> */
+&pwm5 {
+	status = "okay";
+};
+
+/* PWM <C> */
+&pwm6 {
+	status = "okay";
+};
+
+/* PWM <D> */
+&pwm7 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbotg1 {
+	disable-over-current;
+	vbus-supply = <&reg_usbh_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	disable-over-current;
+	vbus-supply = <&reg_usbh_vbus>;
+	status = "okay";
+};
+
+&usdhc1 {
+	vmmc-supply = <&reg_3v3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-emmc-aster.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-emmc-aster.dts
new file mode 100644
index 000000000000..b2cdf4877718
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-emmc-aster.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-emmc-nonwifi.dtsi"
+#include "imx6ull-colibri-aster.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 1GB (eMMC) on Colibri Aster";
+	compatible = "toradex,colibri-imx6ull-emmc-aster",
+		     "toradex,colibri-imx6ull-emmc",
+		     "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-emmc-eval-v3.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-emmc-eval-v3.dts
new file mode 100644
index 000000000000..2dc16c54fc78
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-emmc-eval-v3.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2021 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-emmc-nonwifi.dtsi"
+#include "imx6ull-colibri-eval-v3.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 1GB (eMMC) on Colibri Evaluation Board V3";
+	compatible = "toradex,colibri-imx6ull-emmc-eval",
+		     "toradex,colibri-imx6ull-emmc",
+		     "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-emmc-iris-v2.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-emmc-iris-v2.dts
new file mode 100644
index 000000000000..9bae08fb7f85
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-emmc-iris-v2.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-emmc-nonwifi.dtsi"
+#include "imx6ull-colibri-iris-v2.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 1G (eMMC) on Colibri Iris V2";
+	compatible = "toradex,colibri-imx6ull-emmc-iris-v2",
+		     "toradex,colibri-imx6ull-emmc",
+		     "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-emmc-iris.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-emmc-iris.dts
new file mode 100644
index 000000000000..0b1603ff9420
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-emmc-iris.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-emmc-nonwifi.dtsi"
+#include "imx6ull-colibri-iris.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 1GB (eMMC) on Colibri Iris";
+	compatible = "toradex,colibri-imx6ull-emmc-iris",
+		     "toradex,colibri-imx6ull-emmc",
+		     "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-emmc-nonwifi.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-emmc-nonwifi.dtsi
new file mode 100644
index 000000000000..ea238525d5c0
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-emmc-nonwifi.dtsi
@@ -0,0 +1,187 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+#include "imx6ull-colibri.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &usdhc2; /* eMMC */
+		mmc1 = &usdhc1; /* MMC 4-bit slot */
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+};
+
+&gpio1 {
+	gpio-line-names = "SODIMM_8",
+			  "SODIMM_6",
+			  "SODIMM_129",
+			  "SODIMM_89",
+			  "SODIMM_19",
+			  "SODIMM_21",
+			  "UNUSABLE_SODIMM_180",
+			  "UNUSABLE_SODIMM_184",
+			  "SODIMM_4",
+			  "SODIMM_2",
+			  "SODIMM_106",
+			  "SODIMM_71",
+			  "SODIMM_23",
+			  "SODIMM_31",
+			  "SODIMM_99",
+			  "SODIMM_102",
+			  "SODIMM_33",
+			  "SODIMM_35",
+			  "SODIMM_25",
+			  "SODIMM_27",
+			  "SODIMM_36",
+			  "SODIMM_38",
+			  "SODIMM_32",
+			  "SODIMM_34",
+			  "SODIMM_135",
+			  "SODIMM_77",
+			  "SODIMM_100",
+			  "SODIMM_186",
+			  "SODIMM_196",
+			  "SODIMM_194";
+};
+
+&gpio2 {
+	gpio-line-names = "SODIMM_55",
+			  "SODIMM_63",
+			  "SODIMM_178",
+			  "SODIMM_188",
+			  "SODIMM_73",
+			  "SODIMM_30",
+			  "SODIMM_67",
+			  "SODIMM_104",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_190",
+			  "SODIMM_47",
+			  "SODIMM_192",
+			  "SODIMM_49",
+			  "SODIMM_51",
+			  "SODIMM_53";
+};
+
+&gpio3 {
+	gpio-line-names = "SODIMM_56",
+			  "SODIMM_44",
+			  "SODIMM_68",
+			  "SODIMM_82",
+			  "",
+			  "SODIMM_76",
+			  "SODIMM_70",
+			  "SODIMM_60",
+			  "SODIMM_58",
+			  "SODIMM_78",
+			  "SODIMM_72",
+			  "SODIMM_80",
+			  "SODIMM_46",
+			  "SODIMM_62",
+			  "SODIMM_48",
+			  "SODIMM_74",
+			  "SODIMM_50",
+			  "SODIMM_52",
+			  "SODIMM_54",
+			  "SODIMM_66",
+			  "SODIMM_64",
+			  "SODIMM_57",
+			  "SODIMM_61",
+			  "SODIMM_29",
+			  "SODIMM_37",
+			  "SODIMM_88",
+			  "SODIMM_86",
+			  "SODIMM_92",
+			  "SODIMM_90";
+};
+
+&gpio4 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_140",
+			  "SODIMM_59",
+			  "SODIMM_142",
+			  "SODIMM_144",
+			  "SODIMM_133",
+			  "SODIMM_146",
+			  "SODIMM_28",
+			  "SODIMM_75",
+			  "SODIMM_96",
+			  "SODIMM_81",
+			  "SODIMM_94",
+			  "SODIMM_101",
+			  "SODIMM_103",
+			  "SODIMM_79",
+			  "SODIMM_97",
+			  "SODIMM_69",
+			  "SODIMM_98",
+			  "SODIMM_85",
+			  "SODIMM_65";
+};
+
+&gpio5 {
+	gpio-line-names = "SODIMM_43",
+			  "SODIMM_45",
+			  "SODIMM_137",
+			  "SODIMM_95",
+			  "SODIMM_107",
+			  "SODIMM_131",
+			  "SODIMM_93",
+			  "",
+			  "SODIMM_138",
+			  "",
+			  "SODIMM_105",
+			  "SODIMM_127";
+};
+
+/* NAND */
+&gpmi {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3
+		&pinctrl_gpio4 &pinctrl_gpio6 &pinctrl_gpio7
+		&pinctrl_gpmi_gpio>;
+};
+
+&iomuxc_snvs {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio3>;
+};
+
+/* eMMC */
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2emmc>;
+	assigned-clocks = <&clks IMX6UL_CLK_USDHC2_SEL>, <&clks IMX6UL_CLK_USDHC2>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>;
+	assigned-clock-rates = <0>, <198000000>;
+	bus-width = <8>;
+	keep-power-in-suspend;
+	no-1-8-v;
+	non-removable;
+	vmmc-supply = <&reg_module_3v3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-eval-v3.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-eval-v3.dts
new file mode 100644
index 000000000000..c5bc255b21e1
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-eval-v3.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-nonwifi.dtsi"
+#include "imx6ull-colibri-eval-v3.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 256/512MB on Colibri Evaluation Board V3";
+	compatible = "toradex,colibri-imx6ull-eval", "toradex,colibri-imx6ull", "fsl,imx6ull";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-eval-v3.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-eval-v3.dtsi
new file mode 100644
index 000000000000..692ef26fbab3
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-eval-v3.dtsi
@@ -0,0 +1,123 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017-2022 Toradex
+ */
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	/* fixed crystal dedicated to mcp2515 */
+	clk16m: clk16m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <16000000>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh_reg>;
+		regulator-name = "VCC_USB[1-4]";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		vin-supply = <&reg_5v0>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&ecspi1 {
+	status = "okay";
+
+	mcp2515: can@0 {
+		compatible = "microchip,mcp2515";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can_int>;
+		reg = <0>;
+		clocks = <&clk16m>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+		spi-max-frequency = <10000000>;
+		vdd-supply = <&reg_3v3>;
+		xceiver-supply = <&reg_5v0>;
+		status = "okay";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* M41T0M6 real time clock on carrier board */
+	m41t0m6: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+/* PWM <A> */
+&pwm4 {
+	status = "okay";
+};
+
+/* PWM <B> */
+&pwm5 {
+	status = "okay";
+};
+
+/* PWM <C> */
+&pwm6 {
+	status = "okay";
+};
+
+/* PWM <D> */
+&pwm7 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbotg1 {
+	disable-over-current;
+	vbus-supply = <&reg_usbh_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	disable-over-current;
+	vbus-supply = <&reg_usbh_vbus>;
+	status = "okay";
+};
+
+&usdhc1 {
+	vmmc-supply = <&reg_3v3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris-v2.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris-v2.dts
new file mode 100644
index 000000000000..f6b31118be17
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris-v2.dts
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-nonwifi.dtsi"
+#include "imx6ull-colibri-iris-v2.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 256M/512B on Colibri Iris V2";
+	compatible = "toradex,colibri-imx6ull-iris-v2",
+		     "toradex,colibri-imx6ull",
+		     "fsl,imx6ull";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+&atmel_mxt_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&gpio1 {
+	/* This turns the LVDS transceiver on */
+	lvds-power-on-hog {
+		gpio-hog;
+		gpios = <14 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */
+		line-name = "LVDS_POWER_ON";
+		output-high;
+	};
+};
+
+&gpio2 {
+	/*
+	 * This switches the LVDS transceiver to the single-channel
+	 * output mode.
+	 */
+	lvds-ch-mode-hog {
+		gpio-hog;
+		gpios = <0 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */
+		line-name = "LVDS_CH_MODE";
+		output-high;
+	};
+
+	/*
+	 * This switches the LVDS transceiver to the 24-bit RGB mode.
+	 */
+	lvds-rgb-mode-hog {
+		gpio-hog;
+		gpios = <1 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */
+		line-name = "LVDS_RGB_MODE";
+		output-low;
+	};
+};
+
+&gpio5 {
+	/*
+	 * This switches the LVDS transceiver to VESA color mapping mode.
+	 */
+	lvds-color-map-hog {
+		gpio-hog;
+		gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */
+		line-name = "LVDS_COLOR_MAP";
+		output-low;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+/* PWM <B> */
+&pwm5 {
+	/* Pin already used by atmel_mxt_ts touchscreen */
+	status = "disabled";
+};
+
+/* PWM <C> */
+&pwm6 {
+	/* Pin already used by atmel_mxt_ts touchscreen */
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris-v2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris-v2.dtsi
new file mode 100644
index 000000000000..93649cad0cc0
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris-v2.dtsi
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2022 Toradex
+ */
+
+#include "imx6ull-colibri-iris.dtsi"
+
+/ {
+	reg_3v3_vmmc: regulator-3v3-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3_vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <100>;
+		enable-active-high;
+	};
+};
+
+
+&usdhc1 {
+	cap-power-off-card;
+	vmmc-supply = <&reg_3v3_vmmc>;
+	/delete-property/ keep-power-in-suspend;
+	/delete-property/ no-1-8-v;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris.dts
new file mode 100644
index 000000000000..2a0d0fc3b9d6
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-nonwifi.dtsi"
+#include "imx6ull-colibri-iris.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 256/512MB on Colibri Iris";
+	compatible = "toradex,colibri-imx6ull-iris",
+		     "toradex,colibri-imx6ull",
+		     "fsl,imx6ull";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris.dtsi
new file mode 100644
index 000000000000..bce6fbf230b3
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris.dtsi
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2022 Toradex
+ */
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_snvs_gpiokeys>;
+
+		key-power {
+			label = "Wake-Up";
+			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh_reg>;
+		regulator-name = "VCC_USB[1-4]";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		vin-supply = <&reg_5v0>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&gpio1 {
+	/*
+	 * uart25_tx_on turns the UART transceiver on. If one wants to turn the
+	 * transceiver off, that property has to be deleted and the gpio handled
+	 * in userspace.
+	 * The same applies to uart1_tx_on.
+	 */
+	uart25_tx_on-hog {
+		gpio-hog;
+		gpios = <15 0>;
+		output-high;
+	};
+};
+
+&gpio2 {
+	uart1_tx_on-hog {
+		gpio-hog;
+		gpios = <7 0>;
+		output-high;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* M41T0M6 real time clock on carrier board */
+	m41t0m6: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+/* PWM <A> */
+&pwm4 {
+	status = "okay";
+};
+
+/* PWM <B> */
+&pwm5 {
+	status = "okay";
+};
+
+/* PWM <C> */
+&pwm6 {
+	status = "okay";
+};
+
+/* PWM <D> */
+&pwm7 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbotg1 {
+	disable-over-current;
+	vbus-supply = <&reg_usbh_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	disable-over-current;
+	vbus-supply = <&reg_usbh_vbus>;
+	status = "okay";
+};
+
+&usdhc1 {
+	vmmc-supply = <&reg_3v3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-nonwifi.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-nonwifi.dtsi
new file mode 100644
index 000000000000..88901db255d6
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-nonwifi.dtsi
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2022 Toradex
+ */
+
+#include "imx6ull-colibri.dtsi"
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+};
+
+&gpio1 {
+	gpio-line-names = "SODIMM_8",
+			  "SODIMM_6",
+			  "SODIMM_129",
+			  "SODIMM_89",
+			  "SODIMM_19",
+			  "SODIMM_21",
+			  "UNUSABLE_SODIMM_180",
+			  "UNUSABLE_SODIMM_184",
+			  "SODIMM_4",
+			  "SODIMM_2",
+			  "SODIMM_106",
+			  "SODIMM_71",
+			  "SODIMM_23",
+			  "SODIMM_31",
+			  "SODIMM_99",
+			  "SODIMM_102",
+			  "SODIMM_33",
+			  "SODIMM_35",
+			  "SODIMM_25",
+			  "SODIMM_27",
+			  "SODIMM_36",
+			  "SODIMM_38",
+			  "SODIMM_32",
+			  "SODIMM_34",
+			  "SODIMM_135",
+			  "SODIMM_77",
+			  "SODIMM_100",
+			  "SODIMM_186",
+			  "SODIMM_196",
+			  "SODIMM_194";
+};
+
+&gpio2 {
+	gpio-line-names = "SODIMM_55",
+			  "SODIMM_63",
+			  "SODIMM_178",
+			  "SODIMM_188",
+			  "SODIMM_73",
+			  "SODIMM_30",
+			  "SODIMM_67",
+			  "SODIMM_104",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_190",
+			  "SODIMM_47",
+			  "SODIMM_192",
+			  "SODIMM_49",
+			  "SODIMM_51",
+			  "SODIMM_53";
+};
+
+&gpio3 {
+	gpio-line-names = "SODIMM_56",
+			  "SODIMM_44",
+			  "SODIMM_68",
+			  "SODIMM_82",
+			  "",
+			  "SODIMM_76",
+			  "SODIMM_70",
+			  "SODIMM_60",
+			  "SODIMM_58",
+			  "SODIMM_78",
+			  "SODIMM_72",
+			  "SODIMM_80",
+			  "SODIMM_46",
+			  "SODIMM_62",
+			  "SODIMM_48",
+			  "SODIMM_74",
+			  "SODIMM_50",
+			  "SODIMM_52",
+			  "SODIMM_54",
+			  "SODIMM_66",
+			  "SODIMM_64",
+			  "SODIMM_57",
+			  "SODIMM_61",
+			  "SODIMM_29",
+			  "SODIMM_37",
+			  "SODIMM_88",
+			  "SODIMM_86",
+			  "SODIMM_92",
+			  "SODIMM_90";
+};
+
+&gpio4 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_59",
+			  "",
+			  "",
+			  "SODIMM_133",
+			  "",
+			  "SODIMM_28",
+			  "SODIMM_75",
+			  "SODIMM_96",
+			  "SODIMM_81",
+			  "SODIMM_94",
+			  "SODIMM_101",
+			  "SODIMM_103",
+			  "SODIMM_79",
+			  "SODIMM_97",
+			  "SODIMM_69",
+			  "SODIMM_98",
+			  "SODIMM_85",
+			  "SODIMM_65";
+};
+
+&gpio5 {
+	gpio-line-names = "SODIMM_43",
+			  "SODIMM_45",
+			  "SODIMM_137",
+			  "SODIMM_95",
+			  "SODIMM_107",
+			  "SODIMM_131",
+			  "SODIMM_93",
+			  "",
+			  "SODIMM_138",
+			  "",
+			  "SODIMM_105",
+			  "SODIMM_127";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3
+		&pinctrl_gpio4 &pinctrl_gpio6 &pinctrl_gpio7>;
+};
+
+&iomuxc_snvs {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio3>;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-wifi-aster.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-wifi-aster.dts
new file mode 100644
index 000000000000..d3bbd05da293
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-wifi-aster.dts
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017-2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-wifi.dtsi"
+#include "imx6ull-colibri-aster.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 512MB on Colibri Aster";
+	compatible = "toradex,colibri-imx6ull-wifi-aster",
+		     "toradex,colibri-imx6ull-wifi",
+		     "fsl,imx6ull";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+&atmel_mxt_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+/* PWM <B> */
+&pwm5 {
+	/* Pin already used by atmel_mxt_ts touchscreen */
+	status = "disabled";
+};
+
+/* PWM <C> */
+&pwm6 {
+	/* Pin already used by atmel_mxt_ts touchscreen */
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-wifi-eval-v3.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-wifi-eval-v3.dts
new file mode 100644
index 000000000000..0ac306c9cef2
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-wifi-eval-v3.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-wifi.dtsi"
+#include "imx6ull-colibri-eval-v3.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 512MB on Colibri Evaluation Board V3";
+	compatible = "toradex,colibri-imx6ull-wifi-eval", "toradex,colibri-imx6ull-wifi", "fsl,imx6ull";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-wifi-iris-v2.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-wifi-iris-v2.dts
new file mode 100644
index 000000000000..38cd52c45496
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-wifi-iris-v2.dts
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-wifi.dtsi"
+#include "imx6ull-colibri-iris-v2.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 512MB on Colibri Iris V2";
+	compatible = "toradex,colibri-imx6ull-wifi-iris-v2",
+		     "toradex,colibri-imx6ull-wifi",
+		     "fsl,imx6ull";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+&atmel_mxt_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&gpio1 {
+	/* This turns the LVDS transceiver on */
+	lvds-power-on-hog {
+		gpio-hog;
+		gpios = <14 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */
+		line-name = "LVDS_POWER_ON";
+		output-high;
+	};
+};
+
+&gpio2 {
+	/*
+	 * This switches the LVDS transceiver to the single-channel
+	 * output mode.
+	 */
+	lvds-ch-mode-hog {
+		gpio-hog;
+		gpios = <0 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */
+		line-name = "LVDS_CH_MODE";
+		output-high;
+	};
+
+	/*
+	 * This switches the LVDS transceiver to the 24-bit RGB mode.
+	 */
+	lvds-rgb-mode-hog {
+		gpio-hog;
+		gpios = <1 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */
+		line-name = "LVDS_RGB_MODE";
+		output-low;
+	};
+};
+
+&gpio5 {
+	/*
+	 * This switches the LVDS transceiver to VESA color mapping mode.
+	 */
+	lvds-color-map-hog {
+		gpio-hog;
+		gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */
+		line-name = "LVDS_COLOR_MAP";
+		output-low;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-wifi-iris.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-wifi-iris.dts
new file mode 100644
index 000000000000..5f60df64f173
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-wifi-iris.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-wifi.dtsi"
+#include "imx6ull-colibri-iris.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 512MB on Colibri Iris";
+	compatible = "toradex,colibri-imx6ull-wifi-iris",
+		     "toradex,colibri-imx6ull-wifi",
+		     "fsl,imx6ull";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+&atmel_mxt_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-wifi.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-wifi.dtsi
new file mode 100644
index 000000000000..db59ee6b1c86
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-wifi.dtsi
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2022 Toradex
+ */
+
+#include "imx6ull-colibri.dtsi"
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	wifi_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_snvs_wifi_pdn>;
+		reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&cpu0 {
+	clock-frequency = <792000000>;
+};
+
+&gpio1 {
+	gpio-line-names = "SODIMM_8",
+			  "SODIMM_6",
+			  "SODIMM_129",
+			  "",
+			  "SODIMM_19",
+			  "SODIMM_21",
+			  "UNUSABLE_SODIMM_180",
+			  "UNUSABLE_SODIMM_184",
+			  "SODIMM_4",
+			  "SODIMM_2",
+			  "SODIMM_106",
+			  "SODIMM_71",
+			  "SODIMM_23",
+			  "SODIMM_31",
+			  "SODIMM_99",
+			  "SODIMM_102",
+			  "SODIMM_33",
+			  "SODIMM_35",
+			  "SODIMM_25",
+			  "SODIMM_27",
+			  "SODIMM_36",
+			  "SODIMM_38",
+			  "SODIMM_32",
+			  "SODIMM_34",
+			  "SODIMM_135",
+			  "SODIMM_77",
+			  "SODIMM_100",
+			  "SODIMM_186",
+			  "SODIMM_196",
+			  "SODIMM_194";
+};
+
+&gpio2 {
+	gpio-line-names = "SODIMM_55",
+			  "SODIMM_63",
+			  "SODIMM_178",
+			  "SODIMM_188",
+			  "SODIMM_73",
+			  "SODIMM_30",
+			  "SODIMM_67",
+			  "SODIMM_104",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_190",
+			  "SODIMM_47",
+			  "SODIMM_192",
+			  "SODIMM_49",
+			  "SODIMM_51",
+			  "SODIMM_53";
+};
+
+&gpio3 {
+	gpio-line-names = "SODIMM_56",
+			  "SODIMM_44",
+			  "SODIMM_68",
+			  "SODIMM_82",
+			  "",
+			  "SODIMM_76",
+			  "SODIMM_70",
+			  "SODIMM_60",
+			  "SODIMM_58",
+			  "SODIMM_78",
+			  "SODIMM_72",
+			  "SODIMM_80",
+			  "SODIMM_46",
+			  "SODIMM_62",
+			  "SODIMM_48",
+			  "SODIMM_74",
+			  "SODIMM_50",
+			  "SODIMM_52",
+			  "SODIMM_54",
+			  "SODIMM_66",
+			  "SODIMM_64",
+			  "SODIMM_57",
+			  "SODIMM_61",
+			  "SODIMM_29",
+			  "SODIMM_37",
+			  "SODIMM_88",
+			  "SODIMM_86",
+			  "SODIMM_92",
+			  "SODIMM_90";
+};
+
+&gpio4 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_59",
+			  "",
+			  "",
+			  "SODIMM_133",
+			  "",
+			  "SODIMM_28",
+			  "SODIMM_75",
+			  "SODIMM_96",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_69",
+			  "SODIMM_98",
+			  "SODIMM_85",
+			  "SODIMM_65";
+};
+
+&gpio5 {
+	gpio-line-names = "SODIMM_43",
+			  "SODIMM_45",
+			  "SODIMM_137",
+			  "SODIMM_95",
+			  "SODIMM_107",
+			  "SODIMM_131",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_105";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3
+		&pinctrl_gpio4 &pinctrl_gpio7>;
+
+};
+
+&iomuxc_snvs {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_snvs_gpio1>;
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	assigned-clocks = <&clks IMX6UL_CLK_USDHC2_SEL>, <&clks IMX6UL_CLK_USDHC2>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>;
+	assigned-clock-rates = <0>, <198000000>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	max-frequency = <25000000>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	no-1-8-v;
+	non-removable;
+	vmmc-supply = <&reg_module_3v3>;
+	wakeup-source;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri.dtsi
new file mode 100644
index 000000000000..ec3c1e7301f4
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri.dtsi
@@ -0,0 +1,772 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2022 Toradex
+ */
+
+#include "imx6ull.dtsi"
+
+/ {
+	/* Ethernet aliases to ensure correct MAC addresses */
+	aliases {
+		ethernet0 = &fec2;
+		ethernet1 = &fec1;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		enable-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_bl_on>;
+		power-supply = <&reg_3v3>;
+		pwms = <&pwm4 0 5000000 1>;
+		status = "disabled";
+	};
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_snvs_usbc_det>;
+		id-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; /* SODIMM 137 / USBC_DET */
+		label = "USBC";
+		self-powered;
+		type = "micro";
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb1_drd_sw>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_snvs_gpiokeys>;
+
+		key-wakeup {
+			debounce-interval = <10>;
+			gpios = <&gpio5 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* SODIMM 45 */
+			label = "Wake-Up";
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+
+	panel_dpi: panel-dpi {
+		compatible = "edt,et057090dhu";
+		backlight = <&backlight>;
+		power-supply = <&reg_3v3>;
+		status = "disabled";
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcdif_out>;
+			};
+		};
+	};
+
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-name = "+V3.3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_module_3v3_avdd: regulator-module-3v3-avdd {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-name = "+V3.3_AVDD_AUDIO";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_sd1_vqmmc: regulator-sd1-vqmmc {
+		compatible = "regulator-gpio";
+		gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_snvs_reg_sd>;
+		regulator-always-on;
+		regulator-name = "+V3.3_1.8_SD";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		states = <1800000 0x1 3300000 0x0>;
+		vin-supply = <&reg_module_3v3>;
+	};
+
+	reg_eth_phy: regulator-eth-phy {
+		compatible = "regulator-fixed-clock";
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "+V3.3_ETH";
+		vin-supply = <&reg_module_3v3>;
+		clocks = <&clks IMX6UL_CLK_ENET2_REF_125M>;
+		startup-delay-us = <150000>;
+	};
+};
+
+&adc1 {
+	vref-supply = <&reg_module_3v3_avdd>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc1>;
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "disabled";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "disabled";
+};
+
+/* Colibri SPI */
+&ecspi1 {
+	cs-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
+};
+
+/* Ethernet */
+&fec2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_enet2>;
+	pinctrl-1 = <&pinctrl_enet2_sleep>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	phy-supply = <&reg_eth_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@2 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			max-speed = <100>;
+			reg = <2>;
+		};
+	};
+};
+
+/* NAND */
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	fsl,use-minimum-ecc;
+	nand-on-flash-bbt;
+	nand-ecc-mode = "hw";
+	nand-ecc-strength = <8>;
+	nand-ecc-step-size = <512>;
+	status = "okay";
+};
+
+/* I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board) */
+&i2c1 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "disabled";
+
+	/* Atmel maxtouch controller */
+	atmel_mxt_ts: touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_atmel_conn &pinctrl_atmel_snvs_conn>;
+		reg = <0x4a>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;       /* SODIMM 107 / INT */
+		reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;    /* SODIMM 106 / RST */
+		status = "disabled";
+	};
+};
+
+/*
+ * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
+ * touch screen controller
+ */
+&i2c2 {
+	/* Use low frequency to compensate for the high pull-up values. */
+	clock-frequency = <40000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	sda-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	ad7879_ts: touchscreen@2c {
+		compatible = "adi,ad7879-1";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_snvs_ad7879_int>;
+		reg = <0x2c>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-max-pressure = <4096>;
+		adi,resistance-plate-x = <120>;
+		adi,first-conversion-delay = /bits/ 8 <3>;
+		adi,acquisition-time = /bits/ 8 <1>;
+		adi,median-filter-size = /bits/ 8 <2>;
+		adi,averaging = /bits/ 8 <1>;
+		adi,conversion-interval = /bits/ 8 <255>;
+		status = "disabled";
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif_dat
+		     &pinctrl_lcdif_ctrl>;
+	status = "disabled";
+
+	port {
+		lcdif_out: endpoint {
+			remote-endpoint = <&lcd_panel_in>;
+		};
+	};
+};
+
+/* PWM <A> */
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+};
+
+/* PWM <B> */
+&pwm5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm5>;
+};
+
+/* PWM <C> */
+&pwm6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm6>;
+};
+
+/* PWM <D> */
+&pwm7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm7>;
+};
+
+&sdma {
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "disabled";
+};
+
+/* Colibri UART_A */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_ctrl1>;
+	uart-has-rtscts;
+	fsl,dte-mode;
+};
+
+/* Colibri UART_B */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	fsl,dte-mode;
+};
+
+/* Colibri UART_C */
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	fsl,dte-mode;
+};
+
+/* Colibri USBC */
+&usbotg1 {
+	dr_mode = "otg";
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	usb-role-switch;
+
+	port {
+		usb1_drd_sw: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
+	};
+};
+
+/* Colibri USBH */
+&usbotg2 {
+	dr_mode = "host";
+};
+
+/* Colibri MMC/SD */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_snvs_usdhc1_cd>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_snvs_usdhc1_cd>;
+	pinctrl-3 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd_sleep>;
+	assigned-clocks = <&clks IMX6UL_CLK_USDHC1_SEL>, <&clks IMX6UL_CLK_USDHC1>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>;
+	assigned-clock-rates = <0>, <198000000>;
+	bus-width = <4>;
+	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; /* MMC_CD */
+	disable-wp;
+	keep-power-in-suspend;
+	no-1-8-v;
+	vqmmc-supply = <&reg_sd1_vqmmc>;
+	wakeup-source;
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_adc1: adc1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__GPIO1_IO00        0x3000 /* SODIMM 8 */
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01        0x3000 /* SODIMM 6 */
+			MX6UL_PAD_GPIO1_IO08__GPIO1_IO08        0x3000 /* SODIMM 4 */
+			MX6UL_PAD_GPIO1_IO09__GPIO1_IO09        0x3000 /* SODIMM 2 */
+		>;
+	};
+
+	pinctrl_atmel_adap: atmeladapgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_DQS__GPIO4_IO16          0xb0a0  /* SODIMM 28 */
+			MX6UL_PAD_ENET1_TX_EN__GPIO2_IO05       0xb0a0  /* SODIMM 30 */
+		>;
+	};
+
+	pinctrl_atmel_conn: atmelconngrp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_MOD__GPIO1_IO10          0xb0a0  /* SODIMM 106 */
+		>;
+	};
+
+	pinctrl_can_int: canintgrp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04	0x13010	/* SODIMM 73 */
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
+		>;
+	};
+
+	pinctrl_enet2_sleep: enet2-sleepgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO06__GPIO1_IO06	0x0
+			MX6UL_PAD_GPIO1_IO07__GPIO1_IO07	0x0
+			MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08	0x0
+			MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09	0x0
+			MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10	0x0
+			MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15	0x0
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
+			MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11	0x0
+			MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12	0x0
+			MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13	0x0
+		>;
+	};
+
+	pinctrl_ecspi1_cs: ecspi1csgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA21__GPIO3_IO26	0x70a0	/* SODIMM 86 */
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK	0x000a0	/* SODIMM 88 */
+			MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI	0x000a0 /* SODIMM 92 */
+			MX6UL_PAD_LCD_DATA23__ECSPI1_MISO	0x100a0 /* SODIMM 90 */
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX	0x1b020
+			MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX	0x1b020
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX	0x1b020
+			MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX	0x1b020
+		>;
+	};
+
+	pinctrl_gpio_bl_on: gpioblongrp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TMS__GPIO1_IO11		0x30a0	/* SODIMM 71 */
+		>;
+	};
+
+	pinctrl_gpio1: gpio1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25	0x10b0 /* SODIMM 77 */
+			MX6UL_PAD_JTAG_TCK__GPIO1_IO14		0x70a0 /* SODIMM 99 */
+			MX6UL_PAD_NAND_CE1_B__GPIO4_IO14	0x10b0 /* SODIMM 133 */
+			MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24	0x10b0 /* SODIMM 135 */
+			MX6UL_PAD_UART3_CTS_B__GPIO1_IO26	0x10b0 /* SODIMM 100 */
+			MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15	0x70a0 /* SODIMM 102 */
+			MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07	0x10b0 /* SODIMM 104 */
+			MX6UL_PAD_UART3_RTS_B__GPIO1_IO27	0x10b0 /* SODIMM 186 */
+		>;
+	};
+
+	pinctrl_gpio2: gpio2grp { /* Camera */
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA04__GPIO4_IO25	0x10b0 /* SODIMM 69 */
+			MX6UL_PAD_CSI_MCLK__GPIO4_IO17		0x10b0 /* SODIMM 75 */
+			MX6UL_PAD_CSI_DATA06__GPIO4_IO27	0x10b0 /* SODIMM 85 */
+			MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18	0x10b0 /* SODIMM 96 */
+			MX6UL_PAD_CSI_DATA05__GPIO4_IO26	0x10b0 /* SODIMM 98 */
+		>;
+	};
+
+	pinctrl_gpio3: gpio3grp { /* CAN2 */
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02	0x10b0 /* SODIMM 178 */
+			MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03	0x10b0 /* SODIMM 188 */
+		>;
+	};
+
+	pinctrl_gpio4: gpio4grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA07__GPIO4_IO28	0x10b0 /* SODIMM 65 */
+		>;
+	};
+
+	pinctrl_gpio6: gpio6grp { /* Wifi pins */
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0x10b0 /* SODIMM 89 */
+			MX6UL_PAD_CSI_DATA02__GPIO4_IO23	0x10b0 /* SODIMM 79 */
+			MX6UL_PAD_CSI_VSYNC__GPIO4_IO19		0x10b0 /* SODIMM 81 */
+			MX6UL_PAD_CSI_DATA03__GPIO4_IO24	0x10b0 /* SODIMM 97 */
+			MX6UL_PAD_CSI_DATA00__GPIO4_IO21	0x10b0 /* SODIMM 101 */
+			MX6UL_PAD_CSI_DATA01__GPIO4_IO22	0x10b0 /* SODIMM 103 */
+			MX6UL_PAD_CSI_HSYNC__GPIO4_IO20		0x10b0 /* SODIMM 94 */
+		>;
+	};
+
+	pinctrl_gpio7: gpio7grp { /* CAN1 */
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00	0xb0b0/* SODIMM 55 */
+			MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01	0xb0b0 /* SODIMM 63 */
+		>;
+	};
+
+	/*
+	 * With an eMMC instead of a raw NAND device the following pins
+	 * are available at SODIMM pins.
+	 */
+	pinctrl_gpmi_gpio: gpmigpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x10b0 /* SODIMM 140 */
+			MX6UL_PAD_NAND_CE0_B__GPIO4_IO13	0x10b0 /* SODIMM 144 */
+			MX6UL_PAD_NAND_CLE__GPIO4_IO15		0x10b0 /* SODIMM 146 */
+			MX6UL_PAD_NAND_READY_B__GPIO4_IO12	0x10b0 /* SODIMM 142 */
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0x100a9
+			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01	0x100a9
+			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02	0x100a9
+			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03	0x100a9
+			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04	0x100a9
+			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05	0x100a9
+			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06	0x100a9
+			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07	0x100a9
+			MX6UL_PAD_NAND_CLE__RAWNAND_CLE		0x100a9
+			MX6UL_PAD_NAND_ALE__RAWNAND_ALE		0x100a9
+			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B	0x100a9
+			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B	0x100a9
+			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B	0x100a9
+			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B	0x100a9
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0	/* SODIMM 196 */
+			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0	/* SODIMM 194 */
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x4001b8b0	/* SODIMM 196 */
+			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x4001b8b0	/* SODIMM 194 */
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001f8b0
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001f8b0
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2-gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x4001f8b0
+			MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x4001f8b0
+		>;
+	};
+
+	pinctrl_lcdif_dat: lcdifdatgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x00079	/* SODIMM 76 */
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x00079	/* SODIMM 70 */
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x00079	/* SODIMM 60 */
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x00079	/* SODIMM 58 */
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x00079	/* SODIMM 78 */
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x00079	/* SODIMM 72 */
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x00079	/* SODIMM 80 */
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x00079	/* SODIMM 46 */
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x00079	/* SODIMM 62 */
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x00079	/* SODIMM 48 */
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x00079	/* SODIMM 74 */
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x00079	/* SODIMM 50 */
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x00079	/* SODIMM 52 */
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x00079	/* SODIMM 54 */
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x00079	/* SODIMM 66 */
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x00079	/* SODIMM 64 */
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x00079	/* SODIMM 57 */
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x00079	/* SODIMM 61 */
+		>;
+	};
+
+	pinctrl_lcdif_ctrl: lcdifctrlgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK	    0x00079	/* SODIMM 56 */
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x00079	/* SODIMM 44 */
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x00079	/* SODIMM 68 */
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x00079	/* SODIMM 82 */
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_WP_B__PWM4_OUT	0x00079		/* SODIMM 59 */
+		>;
+	};
+
+	pinctrl_pwm5: pwm5grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_DQS__PWM5_OUT	0x00079		/* SODIMM 28 */
+		>;
+	};
+
+	pinctrl_pwm6: pwm6grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_TX_EN__PWM6_OUT	0x00079		/* SODIMM 30 */
+		>;
+	};
+
+	pinctrl_pwm7: pwm7grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT	0x00079	/* SODIMM 67 */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DTE_RX	0x1b0b1	/* SODIMM 33 */
+			MX6UL_PAD_UART1_RX_DATA__UART1_DTE_TX	0x1b0b1	/* SODIMM 35 */
+			MX6UL_PAD_UART1_RTS_B__UART1_DTE_CTS	0x1b0b1	/* SODIMM 27 */
+			MX6UL_PAD_UART1_CTS_B__UART1_DTE_RTS	0x1b0b1	/* SODIMM 25 */
+		>;
+	};
+
+	pinctrl_uart1_ctrl1: uart1ctrl1grp { /* Additional DTR, DCD */
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TDI__GPIO1_IO13		0x70a0 /* SODIMM 31 / DCD */
+			MX6UL_PAD_LCD_DATA18__GPIO3_IO23	0x10b0 /* SODIMM 29 / DSR */
+			MX6UL_PAD_JTAG_TDO__GPIO1_IO12		0x90b1 /* SODIMM 23 / DTR */
+			MX6UL_PAD_LCD_DATA19__GPIO3_IO24        0x10b0 /* SODIMM 37 / RI */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX	0x1b0b1 /* SODIMM 36 */
+			MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX	0x1b0b1 /* SODIMM 38 */
+			MX6UL_PAD_UART2_CTS_B__UART2_DTE_RTS	0x1b0b1 /* SODIMM 32 */
+			MX6UL_PAD_UART2_RTS_B__UART2_DTE_CTS	0x1b0b1 /* SODIMM 34 */
+		>;
+	};
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO04__UART5_DTE_RX	0x1b0b1 /* SODIMM 19 */
+			MX6UL_PAD_GPIO1_IO05__UART5_DTE_TX	0x1b0b1 /* SODIMM 21 */
+		>;
+	};
+
+	pinctrl_usbh_reg: usbhreggrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0x10b0 /* SODIMM 129 / USBH_PEN */
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059 /* SODIMM 47 */
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059 /* SODIMM 190 */
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059 /* SODIMM 192 */
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059 /* SODIMM 49 */
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059 /* SODIMM 51 */
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059 /* SODIMM 53 */
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA00__USDHC2_DATA0	0x17069
+			MX6UL_PAD_CSI_DATA01__USDHC2_DATA1	0x17069
+			MX6UL_PAD_CSI_DATA02__USDHC2_DATA2	0x17069
+			MX6UL_PAD_CSI_DATA03__USDHC2_DATA3	0x17069
+			MX6UL_PAD_CSI_HSYNC__USDHC2_CMD		0x17069
+			MX6UL_PAD_CSI_VSYNC__USDHC2_CLK		0x10069
+
+			MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT	0x10
+		>;
+	};
+
+	pinctrl_usdhc2emmc: usdhc2emmcgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK     0x17059
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD     0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17059
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17059
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17059
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17059
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY    0x30b0
+		>;
+	};
+};
+
+&iomuxc_snvs {
+	pinctrl_atmel_snvs_conn: atmelsnvsconngrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04     0xb0a0	/* SODIMM 107 */
+		>;
+	};
+
+	pinctrl_snvs_gpio1: snvsgpio1grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x110a0	/* SODIMM 93 */
+			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x110a0	/* SODIMM 95 */
+			MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10	0x1b0a0	/* SODIMM 105 */
+			MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x0b0a0	/* SODIMM 131 / USBH_OC */
+			MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x110a0	/* SODIMM 138 */
+		>;
+	};
+
+	pinctrl_snvs_gpio3: snvsgpio3grp { /* Wifi pins */
+		fsl,pins = <
+			MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11	0x130a0	/* SODIMM 127 */
+		>;
+	};
+
+	pinctrl_snvs_ad7879_int: snvsad7879intgrp { /* TOUCH Interrupt */
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x100b0
+		>;
+	};
+
+	pinctrl_snvs_reg_sd: snvsregsdgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x400100b0
+		>;
+	};
+
+	pinctrl_snvs_usbc_det: snvsusbcdetgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x130b0
+		>;
+	};
+
+	pinctrl_snvs_gpiokeys: snvsgpiokeysgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x130a0	/* SODIMM 45 / WAKE_UP */
+		>;
+	};
+
+	pinctrl_snvs_usdhc1_cd: snvsusdhc1cdgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x1b0a0 /* SODIMM 43 / MMC_CD */
+		>;
+	};
+
+	pinctrl_snvs_usdhc1_cd_sleep: snvsusdhc1cd-sleepgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x0
+		>;
+	};
+
+	pinctrl_snvs_wifi_pdn: snvswifipdngrp {
+		fsl,pins = <
+			MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11	0x130a0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-drc02.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-drc02.dts
new file mode 100644
index 000000000000..b539975a872c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-drc02.dts
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2023 DH electronics GmbH
+ *
+ * DHCOM iMX6ULL variant:
+ * DHCM-iMX6ULL-C080-R051-F0409-SPI-E2-CAN2-SD-RTC-ADC-I-01D2
+ * DHCOR PCB number: 578-200 or newer
+ * DHCOM PCB number: 579-200 or newer
+ * DRC02 PCB number: 568-100 or newer (2nd ethernet by SoM)
+ */
+/dts-v1/;
+
+#include "imx6ull-dhcom-som.dtsi"
+#include "imx6ull-dhcom-som-cfg-sdcard.dtsi"
+
+/ {
+	model = "DH electronics i.MX6ULL DHCOM on DRC02";
+	compatible = "dh,imx6ull-dhcom-drc02", "dh,imx6ull-dhcom-som",
+		     "dh,imx6ull-dhcor-som", "fsl,imx6ull";
+};
+
+/*
+ * The signals for CAN2 TX and RX are routed to the DHCOM UART1 RTS/CTS pins.
+ * Therefore the UART RTS/CTS must be output on other DHCOM pins, see uart1
+ * node below.
+ */
+&can2 {
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "DRC02-In2",
+		"", "", "", "",
+		"", "", "DHCOM-I", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "DRC02-HW0", "DRC02-HW1", "DHCOM-M",
+		"DRC02-HW2", "DHCOM-U", "DHCOM-T", "DHCOM-S",
+		"DHCOM-R", "DHCOM-Q", "DHCOM-P", "DHCOM-O",
+		"DHCOM-N", "", "", "";
+	/*
+	 * NOTE: On DRC02, the RS485_RX_En is controlled by a separate
+	 * GPIO line, however the i.MX6ULL UART driver assumes RX happens
+	 * during TX anyway and that it only controls drive enable DE
+	 * line. Hence, the RX is always enabled here.
+	 */
+	rs485-rx-en-hog {
+		gpio-hog;
+		gpios = <25 0>; /* GPIO Q */
+		line-name = "rs485-rx-en";
+		output-low;
+	};
+};
+
+&gpio5 {
+	gpio-line-names =
+		"DHCOM-A", "DHCOM-B", "DHCOM-C", "DRC02-Out2",
+		"DHCOM-E", "", "", "DRC02-Out1",
+		"DRC02-In1", "DHCOM-H", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+/* DHCOM I2C2 */
+&i2c1 {
+	eeprom@56 {
+		compatible = "atmel,24c04";
+		reg = <0x56>;
+		pagesize = <16>;
+	};
+};
+
+&uart1 {
+	/delete-property/ uart-has-rtscts;
+	rts-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>; /* GPIO I */
+	cts-gpios = <&gpio4 19 GPIO_ACTIVE_HIGH>; /* GPIO M */
+};
+
+/* Use UART as RS485 */
+&uart2 {
+	/delete-property/ uart-has-rtscts;
+	linux,rs485-enabled-at-boot-time;
+	rts-gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* GPIO P */
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-pdk2.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-pdk2.dts
new file mode 100644
index 000000000000..04e570d76e42
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-pdk2.dts
@@ -0,0 +1,222 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2023 DH electronics GmbH
+ *
+ * DHCOM iMX6ULL variant:
+ * DHCM-iMX6ULL-C080-R051-F0409-SPI-E2-CAN2-RTC-WBT-ADC-I-01D2
+ * DHCOR PCB number: 578-200 or newer
+ * DHCOM PCB number: 579-200 or newer
+ * PDK2 PCB number: 516-400 or newer
+ */
+/dts-v1/;
+
+#include "imx6ull-dhcom-som.dtsi"
+
+/ {
+	model = "DH electronics i.MX6ULL DHCOM on Premium Developer Kit (2)";
+	compatible = "dh,imx6ull-dhcom-pdk2", "dh,imx6ull-dhcom-som",
+		     "dh,imx6ull-dhcor-som", "fsl,imx6ull";
+
+	clk_ext_audio_codec: clock-codec {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	display_bl: display-bl {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>;
+		default-brightness-level = <8>;
+		enable-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>; /* GPIO G */
+		power-supply = <&reg_panel_3v3>;
+		pwms = <&pwm1 0 50000 PWM_POLARITY_INVERTED>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-0 {
+			gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; /* GPIO A */
+			label = "TA1-GPIO-A";
+			linux,code = <KEY_A>;
+			wakeup-source;
+		};
+
+		button-1 {
+			gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; /* GPIO B */
+			label = "TA2-GPIO-B";
+			linux,code = <KEY_B>;
+			wakeup-source;
+		};
+
+		button-2 {
+			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; /* GPIO C */
+			label = "TA3-GPIO-C";
+			linux,code = <KEY_C>;
+			wakeup-source;
+		};
+
+		button-3 {
+			gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; /* GPIO D */
+			label = "TA4-GPIO-D";
+			linux,code = <KEY_D>;
+			wakeup-source;
+		};
+	};
+
+	led: led {
+		compatible = "gpio-leds";
+
+		/*
+		 * Disable PDK2 LED5, because GPIO E is
+		 * already used as touch interrupt.
+		 */
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <5>; /* PDK2 LED5 */
+			gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>; /* GPIO E */
+			status = "disabled";
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <6>; /* PDK2 LED6 */
+			gpios = <&gpio5 7 GPIO_ACTIVE_HIGH>; /* GPIO F */
+		};
+
+		/*
+		 * Disable PDK2 LED7, because GPIO H is
+		 * already used for WiFi pin WL_REG_ON.
+		 */
+		led-2 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <7>; /* PDK2 LED7 */
+			gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; /* GPIO H */
+			status = "disabled";
+		};
+
+		/*
+		 * Disable PDK2 LED8, because GPIO I is
+		 * already used for BT pin BT_REG_ON.
+		 */
+		led-3 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <8>; /* PDK2 LED8 */
+			gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>; /* GPIO I */
+			status = "disabled";
+		};
+	};
+
+	panel {
+		compatible = "edt,etm0700g0edh6";
+		backlight = <&display_bl>;
+		power-supply = <&reg_panel_3v3>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	/* Filtered supply voltage */
+	reg_pdk2_24v: regulator-pdk2-24v {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <24000000>;
+		regulator-min-microvolt = <24000000>;
+		regulator-name = "24V_PDK2";
+	};
+
+	/* PDK2 U35 */
+	reg_pdk2_3v3: regulator-pdk2-3v3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "3V3_PDK2";
+		vin-supply = <&reg_pdk2_24v>;
+	};
+
+	/* 560-200 U1 */
+	reg_panel_3v3: regulator-panel-3v3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "3V3_PANEL";
+		vin-supply = <&reg_pdk2_24v>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,name = "sgtl5000";
+		simple-audio-card,routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT";
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Line", "Line In Jack",
+			"Headphone", "Headphone Jack";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			clocks = <&clk_ext_audio_codec>;
+			sound-dai = <&sgtl5000>;
+		};
+	};
+};
+
+/* DHCOM I2C1 */
+&i2c2 {
+	sgtl5000: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clk_ext_audio_codec>;
+		VDDA-supply = <&reg_pdk2_3v3>;
+		VDDIO-supply = <&reg_pdk2_3v3>;
+	};
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
+		vcc-supply = <&reg_panel_3v3>;
+	};
+};
+
+&lcdif {
+	status = "okay";
+
+	port {
+		lcd_display_out: endpoint {
+			remote-endpoint = <&lcd_panel_in>;
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&sai2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-picoitx.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-picoitx.dts
new file mode 100644
index 000000000000..e4cc2223583a
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-picoitx.dts
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2023 DH electronics GmbH
+ *
+ * DHCOM iMX6ULL variant:
+ * DHCM-iMX6ULL-C080-R051-F0409-SPI-E2-CAN2-SD-RTC-ADC-I-01D2
+ * DHCOR PCB number: 578-200 or newer
+ * DHCOM PCB number: 579-200 or newer
+ * PicoITX PCB number: 487-600 or newer
+ */
+/dts-v1/;
+
+#include "imx6ull-dhcom-som.dtsi"
+#include "imx6ull-dhcom-som-cfg-sdcard.dtsi"
+
+/ {
+	model = "DH electronics i.MX6ULL DHCOM on PicoITX";
+	compatible = "dh,imx6ull-dhcom-picoitx", "dh,imx6ull-dhcom-som",
+		     "dh,imx6ull-dhcor-som", "fsl,imx6ull";
+
+	led {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_YELLOW>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* GPIO I */
+		};
+	};
+};
+
+&fec1 {
+	phy-handle = <&mdio1_phy0>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mdio1_phy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-id0007.c0f0", /* SMSC LAN8710Ai */
+				     "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			clock-names = "rmii-ref";
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			interrupt-parent = <&gpio5>;
+			interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+			pinctrl-0 = <&pinctrl_fec1_phy &pinctrl_snvs_fec1_phy>;
+			pinctrl-names = "default";
+			reset-assert-us = <500>;
+			reset-deassert-us = <500>;
+			reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+			smsc,disable-energy-detect; /* Make plugin detection reliable */
+		};
+	};
+};
+
+&fec2 {
+	status = "disabled";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "PicoITX-HW2", "PicoITX-HW1", "DHCOM-M",
+		"PicoITX-HW0", "DHCOM-U", "DHCOM-T", "DHCOM-S",
+		"DHCOM-R", "DHCOM-Q", "DHCOM-P", "DHCOM-O",
+		"DHCOM-N", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"DHCOM-A", "DHCOM-B", "PicoITX-In2", "PicoITX-Out2",
+		"PicoITX-In1", "", "", "PicoITX-Out1",
+		"DHCOM-G", "DHCOM-H", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&iomuxc {
+	pinctrl_fec1: fec1-grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b010
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b010
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b010
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b010
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som-cfg-sdcard.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som-cfg-sdcard.dtsi
new file mode 100644
index 000000000000..5e39f8dc1351
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som-cfg-sdcard.dtsi
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2023 DH electronics GmbH
+ */
+
+/*
+ * Special SoM configuration: SD card
+ *
+ * Enabled:  Micro SD card on module or
+ *           external SD card via DHCOM depends on hardware variant
+ *           GPIO H and GPIO I will be available
+ *           DHCOM UART2 will be available
+ * Disabled: WiFi and BT
+ */
+
+/*
+ * To use usdhc1 as SD card, the WiFi node must be deleted. The associated
+ * pwrseq node is also deleted in order to ensure that GPIO H is released.
+ * BT is also not available, so remove BT from the UART node.
+ */
+/delete-node/ &brcmf;
+/delete-node/ &usdhc1_pwrseq;
+/delete-node/ &bluetooth;
+
+/ {
+	aliases {
+		mmc1 = &usdhc1;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &uart6;
+	};
+
+	reg_sd1_vmmc: regulator-sd1-vmmc {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VSD_3V3";
+	};
+};
+
+/* Micro SD card on module or external SD card via DHCOM */
+&usdhc1 {
+	/delete-property/ #address-cells;
+	/delete-property/ #size-cells;
+	/delete-property/ keep-power-in-suspend;
+	/delete-property/ mmc-pwrseq;
+	/delete-property/ non-removable;
+	/delete-property/ wakeup-source;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	vmmc-supply = <&reg_sd1_vmmc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc1: usdhc1-grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x120b0 /* SD1 CD */
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x120b0 /* SD1 CD */
+
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170f9
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x120b0 /* SD1 CD */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som.dtsi
new file mode 100644
index 000000000000..a74f5273f9b3
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som.dtsi
@@ -0,0 +1,631 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2023 DH electronics GmbH
+ */
+
+#include "imx6ull-dhcor-som.dtsi"
+
+/ {
+	aliases {
+		/delete-property/ spi2;
+		/delete-property/ spi3;
+		i2c0 = &i2c2;
+		i2c1 = &i2c1;
+		mmc2 = &usdhc2;
+		rtc0 = &rtc_i2c;
+		rtc1 = &snvs_rtc;
+		serial0 = &uart1;
+		serial1 = &uart6; /* DHCOM UART2, special hardware required */
+		serial2 = &uart3;
+		serial3 = &uart2; /* Use BT UART always as ttymxc3 */
+		serial4 = &uart4;
+		serial5 = &uart5;
+		spi0 = &ecspi1;
+		spi1 = &ecspi4; /* DHCOM SPI2, special hardware required */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_ext_3v3_ref: regulator-ext-3v3-ref {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VCC_3V3_REF";
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb-otg1-vbus";
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		gpio = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb-otg2-vbus";
+	};
+
+	/* SoM with WiFi/BT: WiFi pin WL_REG_ON is connected to a DHCOM GPIO */
+	usdhc1_pwrseq: usdhc1-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; /* GPIO H */
+	};
+};
+
+/* SoM with WiFi/BT: BT pin BT_REG_ON is connected to a DHCOM GPIO */
+&bluetooth {
+	shutdown-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>; /* GPIO I */
+};
+
+&can1 {
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/*
+ * The signals for CAN2 TX and RX are routed to the DHCOM UART1 RTS/CTS pins.
+ * Only if this pins are used as CAN interface enable it on board layer.
+ */
+&can2 {
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	pinctrl-names = "default";
+};
+
+/* DHCOM SPI1 */
+&ecspi1 {
+	cs-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/*
+ * DHCOM SPI2
+ * Special hardware required that uses the pins of FEC2. Therefore this SPI
+ * interface can only be used if FEC2 is disabled.
+ */
+&ecspi4 {
+	cs-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pinctrl_ecspi4>;
+	pinctrl-names = "default";
+};
+
+/* DHCOM ETH1 */
+&fec1 {
+	phy-handle = <&mdio2_phy0>;
+	phy-mode = "rmii";
+	pinctrl-0 = <&pinctrl_fec1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* DHCOM ETH2 */
+&fec2 {
+	phy-handle = <&mdio2_phy1>;
+	phy-mode = "rmii";
+	pinctrl-0 = <&pinctrl_fec2>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mdio2_phy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-id0007.c0f0", /* SMSC LAN8710Ai */
+				     "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			clock-names = "rmii-ref";
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			interrupt-parent = <&gpio5>;
+			interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+			pinctrl-0 = <&pinctrl_fec1_phy &pinctrl_snvs_fec1_phy>;
+			pinctrl-names = "default";
+			reset-assert-us = <500>;
+			reset-deassert-us = <500>;
+			reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+			smsc,disable-energy-detect; /* Make plugin detection reliable */
+		};
+
+		mdio2_phy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-id0007.c0f0", /* SMSC LAN8710Ai */
+				     "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			clock-names = "rmii-ref";
+			clocks = <&clks IMX6UL_CLK_ENET2_REF>;
+			interrupt-parent = <&gpio5>;
+			interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+			pinctrl-0 = <&pinctrl_fec2_phy &pinctrl_snvs_fec2_phy>;
+			pinctrl-names = "default";
+			reset-assert-us = <500>;
+			reset-deassert-us = <500>;
+			reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+			smsc,disable-energy-detect; /* Make plugin detection reliable */
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "DHCOM-INT",
+		"", "", "", "",
+		"", "", "DHCOM-I", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+	pinctrl-0 = <&pinctrl_spi1_switch
+		     &pinctrl_dhcom_i &pinctrl_dhcom_int>;
+	pinctrl-names = "default";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "DHCOM-L", "DHCOM-K", "DHCOM-M",
+		"DHCOM-J", "DHCOM-U", "DHCOM-T", "DHCOM-S",
+		"DHCOM-R", "DHCOM-Q", "DHCOM-P", "DHCOM-O",
+		"DHCOM-N", "", "", "";
+	pinctrl-0 = <&pinctrl_dhcom_j &pinctrl_dhcom_k
+		     &pinctrl_dhcom_l &pinctrl_dhcom_m
+		     &pinctrl_dhcom_n &pinctrl_dhcom_o
+		     &pinctrl_dhcom_p &pinctrl_dhcom_q
+		     &pinctrl_dhcom_r &pinctrl_dhcom_s
+		     &pinctrl_dhcom_t &pinctrl_dhcom_u>;
+	pinctrl-names = "default";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"DHCOM-A", "DHCOM-B", "DHCOM-C", "DHCOM-D",
+		"DHCOM-E", "", "", "DHCOM-F",
+		"DHCOM-G", "DHCOM-H", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+	pinctrl-0 = <&pinctrl_snvs_dhcom_a &pinctrl_snvs_dhcom_b
+		     &pinctrl_snvs_dhcom_c &pinctrl_snvs_dhcom_d
+		     &pinctrl_snvs_dhcom_e &pinctrl_snvs_dhcom_f
+		     &pinctrl_snvs_dhcom_g &pinctrl_snvs_dhcom_h>;
+	pinctrl-names = "default";
+};
+
+/* DHCOM I2C2 */
+&i2c1 {
+	rtc_i2c: rtc@32 {
+		compatible = "microcrystal,rv8803";
+		reg = <0x32>;
+	};
+
+	/* Microchip 24AA025E48T-I/OT containing MAC for DHCOM ETH1 */
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	/* TI ADC101C027 */
+	adc@51 {
+		compatible = "ti,adc101c";
+		reg = <0x51>;
+		vref-supply = <&reg_ext_3v3_ref>;
+	};
+
+	/* TI ADC101C027 */
+	adc@52 {
+		compatible = "ti,adc101c";
+		reg = <0x52>;
+		vref-supply = <&reg_ext_3v3_ref>;
+	};
+
+	/* Microchip 24AA025E48T-I/OT containing MAC for DHCOM ETH2 */
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+};
+
+/* DHCOM I2C1 */
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-0 = <&pinctrl_lcdif>;
+	pinctrl-names = "default";
+};
+
+&pwm1 {
+	pinctrl-0 = <&pinctrl_pwm1>;
+	pinctrl-names = "default";
+};
+
+&sai2 {
+	assigned-clock-rates = <320000000>;
+	assigned-clocks = <&clks IMX6UL_CLK_PLL3_PFD2>;
+	pinctrl-0 = <&pinctrl_sai2>;
+	pinctrl-names = "default";
+};
+
+&tsc {
+	measure-delay-time = <0xffff>;
+	pinctrl-0 = <&pinctrl_tsc>;
+	pinctrl-names = "default";
+	pre-charge-time = <0xfff>;
+	touchscreen-average-samples = <32>;
+	xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+};
+
+/* DHCOM UART1 */
+&uart1 {
+	pinctrl-0 = <&pinctrl_uart1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/*
+ * DHCOM UART2 (alternative)
+ * Special hardware required that uses DHCOM GPIO pins for DHCOM UART2.
+ * Therefore this UART interface can only be used if DHCOM GPIOs J/K/L/M are
+ * removed from GPIO hog muxing.
+ */
+&uart6 {
+	pinctrl-0 = <&pinctrl_uart6>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+};
+
+&usbotg1 {
+	adp-disable;
+	disable-over-current;
+	dr_mode = "otg";
+	hnp-disable;
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	pinctrl-names = "default";
+	srp-disable;
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	disable-over-current; /* Overcurrent pin is used for TSC */
+	dr_mode = "host";
+	pinctrl-0 = <&pinctrl_usbotg2>;
+	pinctrl-names = "default";
+	tpl-support;
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usbphy2 {
+	fsl,tx-d-cal = <106>;
+};
+
+/* WiFi on LGA */
+&usdhc1 {
+	mmc-pwrseq = <&usdhc1_pwrseq>;
+};
+
+/* eMMC on module */
+&usdhc2 {
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&iomuxc {
+	/* DHCOM GPIOs I..U + INT_HIGHEST_PRIORITY */
+	pinctrl_dhcom_i: dhcom-i-grp {
+		fsl,pins = <MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x400120b0>;
+	};
+
+	pinctrl_dhcom_j: dhcom-j-grp {
+		fsl,pins = <MX6UL_PAD_CSI_HSYNC__GPIO4_IO20	0x400120b0>;
+	};
+
+	pinctrl_dhcom_k: dhcom-k-grp {
+		fsl,pins = <MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18	0x400120b0>;
+	};
+
+	pinctrl_dhcom_l: dhcom-l-grp {
+		fsl,pins = <MX6UL_PAD_CSI_MCLK__GPIO4_IO17	0x400120b0>;
+	};
+
+	pinctrl_dhcom_m: dhcom-m-grp {
+		fsl,pins = <MX6UL_PAD_CSI_VSYNC__GPIO4_IO19	0x400120b0>;
+	};
+
+	pinctrl_dhcom_n: dhcom-n-grp {
+		fsl,pins = <MX6UL_PAD_CSI_DATA07__GPIO4_IO28	0x400120b0>;
+	};
+
+	pinctrl_dhcom_o: dhcom-o-grp {
+		fsl,pins = <MX6UL_PAD_CSI_DATA06__GPIO4_IO27	0x400120b0>;
+	};
+
+	pinctrl_dhcom_p: dhcom-p-grp {
+		fsl,pins = <MX6UL_PAD_CSI_DATA05__GPIO4_IO26	0x400120b0>;
+	};
+
+	pinctrl_dhcom_q: dhcom-q-grp {
+		fsl,pins = <MX6UL_PAD_CSI_DATA04__GPIO4_IO25	0x400120b0>;
+	};
+
+	pinctrl_dhcom_r: dhcom-r-grp {
+		fsl,pins = <MX6UL_PAD_CSI_DATA03__GPIO4_IO24	0x400120b0>;
+	};
+
+	pinctrl_dhcom_s: dhcom-s-grp {
+		fsl,pins = <MX6UL_PAD_CSI_DATA02__GPIO4_IO23	0x400120b0>;
+	};
+
+	pinctrl_dhcom_t: dhcom-t-grp {
+		fsl,pins = <MX6UL_PAD_CSI_DATA01__GPIO4_IO22	0x400120b0>;
+	};
+
+	pinctrl_dhcom_u: dhcom-u-grp {
+		fsl,pins = <MX6UL_PAD_CSI_DATA00__GPIO4_IO21	0x400120b0>;
+	};
+
+	pinctrl_dhcom_int: dhcom-int-grp {
+		fsl,pins = <MX6UL_PAD_JTAG_TMS__GPIO1_IO11	0x400120b0>;
+	};
+
+	pinctrl_ecspi1: ecspi1-grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA23__ECSPI1_MISO	0x100b1
+			MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI	0x100b1
+			MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK	0x100b1
+			MX6UL_PAD_LCD_DATA21__GPIO3_IO26	0x1b0b0 /* SS0 */
+		>;
+	};
+
+	pinctrl_ecspi4: ecspi4-grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_TX_CLK__ECSPI4_MISO	0x100b1
+			MX6UL_PAD_ENET2_TX_EN__ECSPI4_MOSI	0x100b1
+			MX6UL_PAD_ENET2_TX_DATA1__ECSPI4_SCLK	0x100b1
+			MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15	0x1b0b0 /* SS0 */
+		>;
+	};
+
+	pinctrl_fec1: fec1-grp {
+		fsl,pins = <
+			/* FEC1 uses MDIO bus from FEC2 */
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b010
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b010
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b010
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b010
+		>;
+	};
+
+	pinctrl_fec1_phy: fec1-phy-grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA18__GPIO3_IO23	0xb0 /* SMSC PHY reset */
+		>;
+	};
+
+	pinctrl_fec2: fec2-grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b010
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b010
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b010
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b010
+		>;
+	};
+
+	pinctrl_fec2_phy: fec2-phy-grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA19__GPIO3_IO24	0xb0 /* SMSC PHY reset */
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b020
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b020
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
+			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
+		>;
+	};
+
+	pinctrl_i2c2: i2c2-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL	0x4001b8b0
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA	0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2-gpio-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30	0x4001b8b0
+			MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31	0x4001b8b0
+		>;
+	};
+
+	pinctrl_lcdif: lcdif-grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x79
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x79
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x79
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x79
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00	0x79
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01	0x79
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x79
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x79
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x79
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x79
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x79
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x79
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08	0x79
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09	0x79
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x79
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x79
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x79
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x79
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x79
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x79
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16	0x79
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17	0x79
+		>;
+	};
+
+	pinctrl_pwm1: pwm1-grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO08__PWM1_OUT		0x110b0
+		>;
+	};
+
+	pinctrl_sai2: sai2-grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x130b0
+			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
+			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
+			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x120b0
+		>;
+	};
+
+	pinctrl_tsc: tsc-grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01	0xb0
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0xb0
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0xb0
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0xb0
+		>;
+	};
+
+	pinctrl_uart1: uart1-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart6: uart6-grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_MCLK__UART6_DCE_TX	0x1b0b1
+			MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX	0x1b0b1
+			MX6UL_PAD_CSI_VSYNC__UART6_DCE_RTS	0x1b0b1
+			MX6UL_PAD_CSI_HSYNC__UART6_DCE_CTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1-grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x17059
+		>;
+	};
+
+	pinctrl_usbotg2: usbotg2-grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO05__GPIO1_IO05	0x120b0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2-grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x10069
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x17059
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x17059
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x17059
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x17059
+			MX6UL_PAD_NAND_ALE__USDHC2_RESET_B	0x17059 /* SD2 Reset */
+		>;
+	};
+};
+
+&iomuxc_snvs {
+	/* DHCOM GPIOs A..H */
+	pinctrl_snvs_dhcom_a: snvs-dhcom-a-grp {
+		fsl,pins = <MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x400120b0>;
+	};
+
+	pinctrl_snvs_dhcom_b: snvs-dhcom-b-grp {
+		fsl,pins = <MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x400120b0>;
+	};
+
+	pinctrl_snvs_dhcom_c: snvs-dhcom-c-grp {
+		fsl,pins = <MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x400120b0>;
+	};
+
+	pinctrl_snvs_dhcom_d: snvs-dhcom-d-grp {
+		fsl,pins = <MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x400120b0>;
+	};
+
+	pinctrl_snvs_dhcom_e: snvs-dhcom-e-grp {
+		fsl,pins = <MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x400120b0>;
+	};
+
+	pinctrl_snvs_dhcom_f: snvs-dhcom-f-grp {
+		fsl,pins = <MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x400120b0>;
+	};
+
+	pinctrl_snvs_dhcom_g: snvs-dhcom-g-grp {
+		fsl,pins = <MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x400120b0>;
+	};
+
+	pinctrl_snvs_dhcom_h: snvs-dhcom-h-grp {
+		fsl,pins = <MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x400120b0>;
+	};
+
+	pinctrl_snvs_fec1_phy: snvs-fec1-phy-grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05	0xb1 /* SMSC PHY Int */
+		>;
+	};
+
+	pinctrl_snvs_fec2_phy: snvs-fec2-phy-grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06	0xb1 /* SMSC PHY Int */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-maveo-box.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-maveo-box.dts
new file mode 100644
index 000000000000..047f7b2d8526
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-maveo-box.dts
@@ -0,0 +1,359 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2023 DH electronics GmbH
+ * Copyright (C) 2023 Marantec electronics GmbH
+ *
+ * DHCOM iMX6ULL variant:
+ * DHCR-iMX6ULL-C080-R051-SPI-WBT-I-01LG
+ * DHCOR PCB number: 578-200 or newer
+ * maveo box PCB number: 525-200 or newer
+ */
+
+/dts-v1/;
+
+#include "imx6ull-dhcor-som.dtsi"
+
+/ {
+	model = "DH electronics i.MX6ULL DHCOR on maveo box";
+	compatible = "marantec,imx6ull-dhcor-maveo-box", "dh,imx6ull-dhcor-som",
+		     "fsl,imx6ull";
+
+	aliases {
+		mmc2 = &usdhc2;
+		spi0 = &ecspi4;
+		spi3 = &ecspi1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb-otg1-vbus";
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb-otg2-vbus";
+	};
+
+	/* WiFi pin WL_REG_ON is connected to GPIO 5.9 */
+	usdhc1_pwrseq: usdhc1-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	};
+};
+
+/* BT pin BT_REG_ON is connected to GPIO 1.18 */
+&bluetooth {
+	shutdown-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+};
+
+/* X10 connector */
+&ecspi4 {
+	cs-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pinctrl_ecspi4>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	spidev@0 {
+		compatible = "dh,dhcom-board";
+		reg = <0>;
+		spi-cpha;
+		spi-cpol;
+		spi-max-frequency = <54000000>;
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "BUTTON-USER", "", "",
+		"BUTTON-RESET", "", "", "",
+		"", "", "", "",
+		"", "", "BT-REG-ON", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"PSOC-GPIO-1", "", "", "X10-12",
+		"X10-10", "PSOC-GPIO-2", "PSOC-GPIO-3", "",
+		"X10-11", "X10-9", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"DHCOR-HW0", "DHCOR-HW1", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "MAVEO-BOX-HW0", "LED-G", "MAVEO-BOX-VAR1",
+		"MAVEO-BOX-VAR0", "MAVEO-BOX-HW1", "MAVEO-BOX-HW2", "LED-B",
+		"LED-R", "", "", "",
+		"", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"PSOC-SWD-IO", "PSOC-SWD-CLK", "PSOC-RESET", "ZIGBEE-PROG",
+		"ZIGBEE-RESET", "", "PSOC-PWR-FAIL-OUT", "NFC-ENABLE",
+		"NFC-IRQ", "WL-REG-ON", "DHCOR-BOOT-M0", "DHCOR-BOOT-M1",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+/* Console UART */
+&uart1 {
+	pinctrl-0 = <&pinctrl_uart1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* BT on LGA */
+&uart2 {
+	pinctrl-0 = <&pinctrl_uart2 &pinctrl_bt_gpio>;
+};
+
+/* Zigbee UART */
+&uart3 {
+	pinctrl-0 = <&pinctrl_uart3 &pinctrl_snvs_zigbee_gpio>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbotg1 {
+	adp-disable;
+	disable-over-current; /* Overcurrent pin isn't connected */
+	dr_mode = "otg";
+	hnp-disable;
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	pinctrl-names = "default";
+	srp-disable;
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	disable-over-current; /* Overcurrent pin isn't connected */
+	dr_mode = "host";
+	pinctrl-0 = <&pinctrl_usbotg2>;
+	pinctrl-names = "default";
+	tpl-support;
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usbphy2 {
+	fsl,tx-d-cal = <106>;
+};
+
+/* WiFi on LGA */
+&usdhc1 {
+	mmc-pwrseq = <&usdhc1_pwrseq>;
+	pinctrl-0 = <&pinctrl_usdhc1_wifi &pinctrl_snvs_wifi_gpio>;
+};
+
+/* eMMC */
+&usdhc2 {
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_hog_maveo_box>;
+	pinctrl-names = "default";
+
+	pinctrl_hog_maveo_box: hog-maveo-box-grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO05__GPIO1_IO05	0x120b0    /* BUTTON_USER */
+			MX6UL_PAD_GPIO1_IO08__GPIO1_IO08	0x120b0    /* BUTTON_RESET */
+			MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18	0x400120b0 /* LED_G */
+			MX6UL_PAD_CSI_DATA02__GPIO4_IO23	0x400120b0 /* LED_B */
+			MX6UL_PAD_CSI_DATA03__GPIO4_IO24	0x400120b0 /* LED_R */
+			MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09	0x400120b0 /* X10_9 */
+			MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04	0x400120b0 /* X10_10 */
+			MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08	0x400120b0 /* X10_11 */
+			MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03	0x400120b0 /* X10_12 */
+			MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00	0x400120b0 /* PSOC_GPIO_1 */
+			MX6UL_PAD_ENET1_TX_EN__GPIO2_IO05	0x400120b0 /* PSOC_GPIO_2 */
+			MX6UL_PAD_ENET1_TX_CLK__GPIO2_IO06	0x400120b0 /* PSOC_GPIO_3 */
+			MX6UL_PAD_CSI_MCLK__GPIO4_IO17		0x120b0    /* MAVEO_BOX_HW0 */
+			MX6UL_PAD_CSI_DATA00__GPIO4_IO21	0x120b0    /* MAVEO_BOX_HW1 */
+			MX6UL_PAD_CSI_DATA01__GPIO4_IO22	0x120b0    /* MAVEO_BOX_HW2 */
+			MX6UL_PAD_CSI_HSYNC__GPIO4_IO20		0x120b0    /* MAVEO_BOX_VAR0 */
+			MX6UL_PAD_CSI_VSYNC__GPIO4_IO19		0x120b0    /* MAVEO_BOX_VAR1 */
+			MX6UL_PAD_LCD_CLK__GPIO3_IO00		0x120b0    /* DHCOR_HW0 */
+			MX6UL_PAD_LCD_ENABLE__GPIO3_IO01	0x120b0    /* DHCOR_HW1 */
+			MX6UL_PAD_LCD_DATA00__GPIO3_IO05	0x120b0
+			MX6UL_PAD_LCD_DATA01__GPIO3_IO06	0x120b0
+			MX6UL_PAD_LCD_DATA02__GPIO3_IO07	0x120b0
+			MX6UL_PAD_LCD_DATA03__GPIO3_IO08	0x120b0
+			MX6UL_PAD_LCD_DATA04__GPIO3_IO09	0x120b0
+			MX6UL_PAD_LCD_DATA05__GPIO3_IO10	0x120b0
+			MX6UL_PAD_LCD_DATA06__GPIO3_IO11	0x120b0
+			MX6UL_PAD_LCD_DATA07__GPIO3_IO12	0x120b0
+			MX6UL_PAD_LCD_DATA08__GPIO3_IO13	0x120b0
+			MX6UL_PAD_LCD_DATA09__GPIO3_IO14	0x120b0
+			MX6UL_PAD_LCD_DATA10__GPIO3_IO15	0x120b0
+			MX6UL_PAD_LCD_DATA11__GPIO3_IO16	0x120b0
+			MX6UL_PAD_LCD_DATA12__GPIO3_IO17	0x120b0
+			MX6UL_PAD_LCD_DATA13__GPIO3_IO18	0x120b0
+			MX6UL_PAD_LCD_DATA14__GPIO3_IO19	0x120b0
+			MX6UL_PAD_LCD_DATA15__GPIO3_IO20	0x120b0
+			MX6UL_PAD_LCD_DATA16__GPIO3_IO21	0x120b0
+			MX6UL_PAD_LCD_DATA17__GPIO3_IO22	0x120b0
+			MX6UL_PAD_LCD_DATA18__GPIO3_IO23	0x120b0
+		>;
+	};
+
+	pinctrl_bt_gpio: bt-gpio-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x400120b0 /* BT_REG_ON */
+		>;
+	};
+
+	pinctrl_ecspi4: ecspi4-grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_TX_CLK__ECSPI4_MISO	0x100b1
+			MX6UL_PAD_ENET2_TX_EN__ECSPI4_MOSI	0x100b1
+			MX6UL_PAD_ENET2_TX_DATA1__ECSPI4_SCLK	0x100b1
+			MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15	0x1b0b0 /* SS0 */
+		>;
+	};
+
+	pinctrl_i2c2: i2c2-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL	0x4001b8b0
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA	0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2-gpio-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30	0x4001b8b0
+			MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31	0x4001b8b0
+		>;
+	};
+
+	pinctrl_uart1: uart1-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3-grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_READY_B__UART3_DCE_TX	0x1b0b1
+			MX6UL_PAD_NAND_CE0_B__UART3_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1-grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x17059
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0x120b0 /* USB_OTG1_PWR */
+		>;
+	};
+
+	pinctrl_usbotg2: usbotg2-grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0x120b0 /* USB_OTG2_PWR */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2-grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x10069
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x17059
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x17059
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x17059
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x17059
+			MX6UL_PAD_NAND_ALE__USDHC2_RESET_B	0x17059 /* SD2 Reset */
+		>;
+	};
+};
+
+&iomuxc_snvs {
+	pinctrl-0 = <&pinctrl_snvs_hog_maveo_box>;
+	pinctrl-names = "default";
+
+	pinctrl_snvs_hog_maveo_box: snvs-hog-maveo-box-grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x400120b0 /* PSOC_SWD_IO */
+			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x400120b0 /* PSOC_SWD_CLK */
+			MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x400120b0 /* PSOC_RESET */
+			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x400120b0 /* PSOC_PWR_FAIL_OUT */
+			MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x400120b0 /* NFC_ENABLE */
+			MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x400120b0 /* NFC_IRQ */
+			MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10	0x120b0    /* DHCOR_BOOT_M0 */
+			MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11	0x120b0    /* DHCOR_BOOT_M1 */
+		>;
+	};
+
+	pinctrl_snvs_wifi_gpio: snvs-wifi-gpio-grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x400120b0 /* WL_REG_ON */
+		>;
+	};
+
+	pinctrl_snvs_zigbee_gpio: snvs-zigbee-gpio-grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x400120b0 /* ZIGBEE_PROG */
+			MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x400120b0 /* ZIGBEE_RESET */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-som.dtsi
new file mode 100644
index 000000000000..75486e1b0c15
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-som.dtsi
@@ -0,0 +1,270 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2023 DH electronics GmbH
+ */
+
+#include <dt-bindings/clock/imx6ul-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/regulator/dlg,da9063-regulator.h>
+#include "imx6ull.dtsi"
+
+/ {
+	aliases {
+		/delete-property/ mmc0;
+		/delete-property/ mmc1;
+	};
+
+	memory@80000000 {
+		/* Appropriate memory size will be filled by U-Boot */
+		reg = <0x80000000 0>;
+		device_type = "memory";
+	};
+};
+
+&cpu0 {
+	/*
+	 * Due to the design as a solderable SOM, there are no capacitors
+	 * below the SoC, therefore higher voltages are required.
+	 * Due to CPU lifetime consideration of the SoC manufacturer and
+	 * the preferred area of operation in the industrial related
+	 * environment, set the maximum frequency for each DHCOM i.MX6ULL
+	 * to 792MHz, as with the industrial type.
+	 */
+	clock-frequency = <792000000>;
+	operating-points = <
+		/* kHz	uV */
+		792000	1250000 /* Voltage increased */
+		528000	1175000
+		396000	1025000
+		198000	950000
+	>;
+	fsl,soc-operating-points = <
+		/* KHz	uV */
+		792000	1250000 /* Voltage increased */
+		528000	1175000
+		396000	1175000
+		198000	1175000
+	>;
+};
+
+&gpio1 {
+	pinctrl-0 = <&pinctrl_spi1_switch>;
+	pinctrl-names = "default";
+	/*
+	 * Pin SPI_BOOT_FLASH_EN (GPIO 1.9) is a switch for either using the
+	 * DHCOM SPI1 interface or accessing the SPI bootflash. Both using
+	 * ecspi1, but muxed to different pins. The DHCOM SPI1 interface uses
+	 * the pins PAD_LCD_DATA21..23 and the SPI bootflash uses the pins
+	 * PAD_CSI_DATA04..07. If the SPI bootflash is enabled the pins for
+	 * DHCOM GPIOs N/O/P/Q/R/S/T/U aren't usable anymore, because they
+	 * are used for the bus interface to the SPI bootflash. The GPIOs are
+	 * disconnected by a buffer which is also controlled via the pin
+	 * SPI_BOOT_FLASH_EN. Therefore the access to the bootflash is a
+	 * special case and is disabled by setting GPIO 1.9 to high.
+	 */
+	spi1-switch-hog {
+		gpio-hog;
+		gpios = <9 0>;
+		output-high;
+		line-name = "spi1-switch";
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic@58 {
+		compatible = "dlg,da9061";
+		reg = <0x58>;
+
+		onkey {
+			compatible = "dlg,da9061-onkey", "dlg,da9062-onkey";
+			status = "disabled";
+		};
+
+		regulators {
+			vdd_soc_in_1v4: buck1 {
+				regulator-allowed-modes = <DA9063_BUCK_MODE_SLEEP>; /* PFM */
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <DA9063_BUCK_MODE_SLEEP>;
+				regulator-max-microvolt = <1400000>;
+				regulator-min-microvolt = <1400000>;
+				regulator-name = "vdd_soc_in_1v4";
+			};
+
+			vcc_3v3: buck2 {
+				regulator-allowed-modes = <DA9063_BUCK_MODE_SYNC>; /* PWM */
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "vcc_3v3";
+			};
+
+			/*
+			 * The current DRR3 memory can be supplied with a
+			 * voltage of either 1.35V or 1.5V. For reasons of
+			 * backward compatibility to only 1.5V DDR3 memory,
+			 * the voltage is set to 1.5V.
+			 */
+			vcc_ddr_1v35: buck3 {
+				regulator-allowed-modes = <DA9063_BUCK_MODE_SYNC>; /* PWM */
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+				regulator-max-microvolt = <1500000>;
+				regulator-min-microvolt = <1500000>;
+				regulator-name = "vcc_ddr_1v35";
+			};
+
+			vcc_2v5: ldo1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <2500000>;
+				regulator-min-microvolt = <2500000>;
+				regulator-name = "vcc_2v5";
+			};
+
+			vdd_snvs_in_3v3: ldo2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "vdd_snvs_in_3v3";
+			};
+
+			vcc_1v8: ldo3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "vcc_1v8";
+			};
+
+			vcc_1v2: ldo4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1200000>;
+				regulator-min-microvolt = <1200000>;
+				regulator-name = "vcc_1v2";
+			};
+		};
+
+		thermal {
+			compatible = "dlg,da9061-thermal", "dlg,da9062-thermal";
+			status = "disabled";
+		};
+
+		watchdog {
+			compatible = "dlg,da9061-watchdog", "dlg,da9062-watchdog";
+			status = "disabled";
+		};
+	};
+};
+
+&ocotp {
+	/* Don't get write access by default */
+	read-only;
+};
+
+&reg_arm {
+	vin-supply = <&vdd_soc_in_1v4>;
+};
+
+&reg_soc {
+	vin-supply = <&vdd_soc_in_1v4>;
+};
+
+/* BT on LGA (BT_REG_ON is connected to LGA pin E1) */
+&uart2 {
+	pinctrl-0 = <&pinctrl_uart2>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+
+	/*
+	 * Actually, the maximum speed of the chip is 4MBdps, but there are
+	 * limitations that prevent this speed. It hasn't yet been figured out
+	 * what the reason for this is. Currently, the maximum speed of 3MBdps
+	 * can be used without any problems. If the limitation can be overcome,
+	 * the speed can be increased accordingly.
+	 */
+	bluetooth: bluetooth {
+		compatible = "brcm,bcm43430a1-bt"; /* muRata 1DX */
+		max-speed = <3000000>;
+		vbat-supply = <&vcc_3v3>;
+		vddio-supply = <&vcc_3v3>;
+	};
+};
+
+/* WiFi on LGA (WL_REG_ON is connected to LGA pin E3) */
+&usdhc1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	bus-width = <4>;
+	no-1-8-v;
+	non-removable;
+	keep-power-in-suspend;
+	pinctrl-0 = <&pinctrl_usdhc1_wifi>;
+	pinctrl-names = "default";
+	wakeup-source;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm43430a1-fmac", "brcm,bcm4329-fmac"; /* muRata 1DX */
+		reg = <1>;
+	};
+};
+
+&iomuxc {
+	pinctrl_i2c1: i2c1-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL	0x4001b8b0
+			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA	0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28	0x4001b8b0
+			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29	0x4001b8b0
+		>;
+	};
+
+	pinctrl_spi1_switch: spi1-switch-grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO09__GPIO1_IO09	0x120b0 /* SPI_BOOT_FLASH_EN */
+		>;
+	};
+
+	pinctrl_uart2: uart2-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
+			MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS	0x1b0b1
+			MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1_wifi: usdhc1-wifi-grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x1b0b0
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10010
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x1b0b0
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x1b0b0
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x1b0b0
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-bmm.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-bmm.dts
new file mode 100644
index 000000000000..279d46c22cd7
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-bmm.dts
@@ -0,0 +1,303 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 Amarula Solutions, Dario Binacchi <dario.binacchi@amarulasolutions.com>
+ * Copyright (C) 2025 Engicam srl
+ */
+
+/dts-v1/;
+
+#include "imx6ull-engicam-microgea.dtsi"
+
+/ {
+	compatible = "engicam,microgea-imx6ull-bmm",
+		     "engicam,microgea-imx6ull", "fsl,imx6ull";
+	model = "Engicam MicroGEA i.MX6ULL BMM Board";
+
+	backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 100>;
+		num-interpolated-steps = <100>;
+		default-brightness-level = <85>;
+		pwms = <&pwm8 0 100000 0>;
+	};
+
+	buzzer {
+		compatible = "pwm-beeper";
+		pwms = <&pwm4 0 1000000 0>;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb1>;
+		regulator-name = "usb1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio5 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb2_vbus: regulator-usb2-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb2>;
+		regulator-name = "usbotg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio5 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_ext_pwr: regulator-ext-pwr {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_ext_pwr>;
+		regulator-name = "ext-pwr";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio5 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "imx6ull-microgea-bmm-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+
+		cpu_dai: simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&codec>;
+		};
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	codec: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mclk>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks IMX6UL_CLK_CKO>;
+		assigned-clocks = <&clks IMX6UL_CLK_CKO2_SEL>,
+				  <&clks IMX6UL_CLK_CKO2_PODF>,
+				  <&clks IMX6UL_CLK_CKO2>,
+				  <&clks IMX6UL_CLK_CKO>;
+		assigned-clock-parents = <&clks IMX6UL_CLK_OSC>,
+					 <&clks IMX6UL_CLK_CKO2_SEL>,
+					 <&clks IMX6UL_CLK_CKO2_PODF>,
+					 <&clks IMX6UL_CLK_CKO2>;
+		VDDA-supply = <&reg_3v3>;
+		VDDIO-supply = <&reg_3v3>;
+		VDDD-supply = <&reg_1v8>;
+	};
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&pwm8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm8>;
+	status = "okay";
+};
+
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	status = "okay";
+};
+
+&tsc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tsc>;
+	measure-delay-time = <0x9ffff>;
+	pre-charge-time = <0xfff>;
+	xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
+
+/* MicroSD */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	vmmc-supply = <&reg_3v3>;
+	bus-width = <4>;
+	keep-power-in-suspend;
+	non-removable;
+	wakeup-source;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_can: can-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b020
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b020
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__I2C2_SCL		0x4001b8b0
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA	0x4001b8b0
+		>;
+	};
+
+	pinctrl_mclk: mclkgrp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TMS__CCM_CLKO1		0x13009
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO05__PWM4_OUT		0x110b0
+		>;
+	};
+
+	pinctrl_pwm8: pwm8grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_ER__PWM8_OUT		0x11008
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x130b0
+			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
+			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
+			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x120b0
+		>;
+	};
+
+	pinctrl_tsc: tscgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01	0x000b0
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0x000b0
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0x000b0
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0x000b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170f9
+		>;
+	};
+};
+
+&iomuxc_snvs {
+	pinctrl_reg_usb1: regusb1grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x17059
+		>;
+	};
+
+	pinctrl_reg_usb2: regusb2grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x17059
+		>;
+	};
+
+	pinctrl_reg_ext_pwr: reg-ext-pwrgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-gtw.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-gtw.dts
new file mode 100644
index 000000000000..d500f8839102
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-gtw.dts
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 Amarula Solutions, Dario Binacchi <dario.binacchi@amarulasolutions.com>
+ * Copyright (C) 2025 Engicam srl
+ */
+
+/dts-v1/;
+
+#include "imx6ull-engicam-microgea.dtsi"
+
+/ {
+	compatible = "engicam,microgea-imx6ull-gtw",
+		     "engicam,microgea-imx6ull", "fsl,imx6ull";
+	model = "Engicam MicroGEA i.MX6ULL GTW Board";
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		user-button {
+			label = "User button";
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_MISC>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>, <&pinctrl_pwrled>;
+
+		led-0 {
+			gpios = <&gpio5 7 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led-1 {
+			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-3 {
+			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	usb_hub: usb-hub {
+		compatible = "smsc,usb3503a";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_hub>;
+		reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+/* MicroSD */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	vmmc-supply = <&reg_3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpio_keys: gpio_keysgrp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TDI__GPIO1_IO13		0x0b0b0
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TCK__GPIO1_IO14		0x130b0
+			MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15	0x130b0
+			MX6UL_PAD_JTAG_TDO__GPIO1_IO12		0x130b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
+			MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS	0x1b0b1
+			MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+		>;
+	};
+};
+
+&iomuxc_snvs {
+	pinctrl_pwrled: ledsgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x130b0
+		>;
+	};
+
+	pinctrl_usb_hub: usb_hubgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-rmm.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-rmm.dts
new file mode 100644
index 000000000000..540642e99a41
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-rmm.dts
@@ -0,0 +1,360 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 Amarula Solutions, Dario Binacchi <dario.binacchi@amarulasolutions.com>
+ * Copyright (C) 2025 Engicam srl
+ */
+
+/dts-v1/;
+
+#include "imx6ull-engicam-microgea.dtsi"
+
+/ {
+	compatible = "engicam,microgea-imx6ull-rmm",
+		     "engicam,microgea-imx6ull", "fsl,imx6ull";
+	model = "Engicam MicroGEA i.MX6ULL BMM Board";
+
+	backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 100>;
+		num-interpolated-steps = <100>;
+		default-brightness-level = <85>;
+		pwms = <&pwm8 0 100000 0>;
+	};
+
+	buzzer {
+		compatible = "pwm-beeper";
+		pwms = <&pwm4 0 1000000 0>;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb1>;
+		regulator-name = "usb1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio5 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb2_vbus: regulator-usb2-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb2>;
+		regulator-name = "usbotg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio5 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_ext_pwr: regulator-ext-pwr {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_ext_pwr>;
+		regulator-name = "ext-pwr";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio5 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "imx6ull-microgea-rmm-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+
+		cpu_dai: simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&codec>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-0 {
+			gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			status = "okay";
+		};
+
+		led-1 {
+			gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			status = "okay";
+		};
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	touchscreen: touchscreen@38 {
+		compatible = "edt,edt-ft5306";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchscreen>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+		report-rate-hz = <60>;
+		/* settings valid only for Hycon touchscreen */
+		touchscreen-size-x = <1280>;
+		touchscreen-size-y = <800>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	codec: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mclk>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks IMX6UL_CLK_CKO>;
+		assigned-clocks = <&clks IMX6UL_CLK_CKO2_SEL>,
+				  <&clks IMX6UL_CLK_CKO2_PODF>,
+				  <&clks IMX6UL_CLK_CKO2>,
+				  <&clks IMX6UL_CLK_CKO>;
+		assigned-clock-parents = <&clks IMX6UL_CLK_OSC>,
+					 <&clks IMX6UL_CLK_CKO2_SEL>,
+					 <&clks IMX6UL_CLK_CKO2_PODF>,
+					 <&clks IMX6UL_CLK_CKO2>;
+		VDDA-supply = <&reg_3v3>;
+		VDDIO-supply = <&reg_3v3>;
+		VDDD-supply = <&reg_1v8>;
+	};
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&pwm8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm8>;
+	status = "okay";
+};
+
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb1_vbus>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb2_vbus>;
+	disable-over-current;
+	status = "okay";
+};
+
+/* MicroSD */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	vmmc-supply = <&reg_3v3>;
+	bus-width = <4>;
+	keep-power-in-suspend;
+	non-removable;
+	wakeup-source;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_can: can-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b020
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b020
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_PIXCLK__I2C1_SCL		0x4001b8b0
+			MX6UL_PAD_CSI_MCLK__I2C1_SDA		0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__I2C2_SCL		0x4001b8b0
+			MX6UL_PAD_GPIO1_IO01__I2C2_SDA		0x4001b8b0
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10	0x130b0
+			MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11	0x130b0
+		>;
+	};
+
+	pinctrl_mclk: mclkgrp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TMS__CCM_CLKO1		0x13009
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO05__PWM4_OUT		0x110b0
+		>;
+	};
+
+	pinctrl_pwm8: pwm8grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_ER__PWM8_OUT		0x110b0
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x130b0
+			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
+			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
+			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x120b0
+		>;
+	};
+
+	pinctrl_touchscreen: touchgrp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14	0x17059
+			MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08	0x17059
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX	0x0b0b0
+			MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX	0x0b0b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170f9
+		>;
+	};
+};
+
+&iomuxc_snvs {
+	pinctrl_reg_usb1: regusb1grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x17059
+		>;
+	};
+
+	pinctrl_reg_usb2: regusb2grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x17059
+		>;
+	};
+
+	pinctrl_reg_ext_pwr: reg-ext-pwrgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea.dtsi
new file mode 100644
index 000000000000..43518bf07602
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea.dtsi
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 Amarula Solutions, Dario Binacchi <dario.binacchi@amarulasolutions.com>
+ * Copyright (C) 2025 Engicam srl
+ */
+
+/dts-v1/;
+
+ #include "imx6ull.dtsi"
+
+/ {
+	compatible = "engicam,microgea-imx6ull", "fsl,imx6ull";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>, <&pinctrl_phy_reset>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	local-mac-address = [00 00 00 00 00 00];
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <4000>;
+			reset-deassert-us = <4000>;
+		};
+	};
+};
+
+/* NAND */
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-ecc-mode = "hw";
+	nand-ecc-strength = <0>;
+	nand-ecc-step-size = <0>;
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b009
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_CLE__RAWNAND_CLE		0xb0b1
+			MX6UL_PAD_NAND_ALE__RAWNAND_ALE		0xb0b1
+			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B	0xb0b1
+			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B	0xb000
+			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B	0xb0b1
+			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B	0xb0b1
+			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B	0xb0b1
+			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0xb0b1
+			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01	0xb0b1
+			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02	0xb0b1
+			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03	0xb0b1
+			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04	0xb0b1
+			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05	0xb0b1
+			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06	0xb0b1
+			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07	0xb0b1
+		>;
+	};
+};
+
+&iomuxc_snvs {
+	pinctrl_phy_reset: phy-resetgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-jozacp.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-jozacp.dts
new file mode 100644
index 000000000000..a152eeb78e88
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-jozacp.dts
@@ -0,0 +1,456 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020 Protonic Holland
+ * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "imx6ull.dtsi"
+
+/ {
+	model = "JOZ Access Point";
+	compatible = "joz,jozacp", "fsl,imx6ull";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	/* On board name LED_RGB1 */
+	led-controller-1 {
+		compatible = "pwm-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <0>;
+			pwms = <&pwm1 0 10000000 0>;
+			max-brightness = <255>;
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <1>;
+			pwms = <&pwm3 0 10000000 0>;
+			max-brightness = <255>;
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <2>;
+			pwms = <&pwm5 0 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	/* On board name LED_RGB2 */
+	led-controller-2 {
+		compatible = "pwm-leds";
+
+		led-3 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <3>;
+			pwms = <&pwm2 0 10000000 0>;
+			max-brightness = <255>;
+		};
+
+		led-4 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <4>;
+			pwms = <&pwm4 0 10000000 0>;
+			max-brightness = <255>;
+		};
+
+		led-5 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <5>;
+			pwms = <&pwm6 0 10000000 0>;
+			max-brightness = <255>;
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_5v0>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_vbus: regulator-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vbus>;
+		regulator-name = "vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_5v0>;
+		gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	usdhc2_wifi_pwrseq: usdhc2-wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_npd>;
+		reset-gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&cpu0 {
+	clock-frequency = <792000000>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			reg = <0>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
+			interrupts-extended = <&gpio1 29 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <300>;
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&pwm5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm5>;
+	status = "okay";
+};
+
+&pwm6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm6>;
+	status = "okay";
+};
+
+&snvs_rtc {
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	dtr-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	vbus-supply = <&reg_vbus>;
+	dr_mode = "host";
+	over-current-active-low;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	vmmc-supply = <&reg_3v3>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	cap-mmc-hw-reset;
+	no-sd;
+	no-sdio;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	mmc-pwrseq = <&usdhc2_wifi_pwrseq>;
+	bus-width = <4>;
+	no-1-8-v;
+	no-mmc;
+	no-sd;
+	non-removable;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b0b0
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC	 0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+
+			MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28	0x038b0
+			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29	0x170b0
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* HW Revision */
+			MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09	0x1b0b0
+			MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10	0x1b0b0
+
+			/* HW ID */
+			MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13	0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15	0x1b0b0
+
+			/* Digital inputs */
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0x11000
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0x11000
+			MX6UL_PAD_GPIO1_IO05__GPIO1_IO05	0x11000
+			MX6UL_PAD_GPIO1_IO08__GPIO1_IO08	0x11000
+			MX6UL_PAD_GPIO1_IO09__GPIO1_IO09	0x11000
+
+			/* Isolated outputs */
+			MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20	0x01020
+			MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21	0x01020
+			MX6UL_PAD_UART2_RTS_B__GPIO1_IO23	0x01020
+			MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24	0x01020
+			MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25	0x01020
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_MCLK__I2C1_SDA		0x4001f8b1
+			MX6UL_PAD_CSI_PIXCLK__I2C1_SCL		0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA	0x4001f8b1
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL	0x4001f8b1
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__PWM1_OUT		0x01010
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA01__PWM2_OUT		0x01010
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA02__PWM3_OUT		0x01010
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA03__PWM4_OUT		0x01010
+		>;
+	};
+
+	pinctrl_pwm5: pwm5grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA18__PWM5_OUT		0x01010
+		>;
+	};
+
+	pinctrl_pwm6: pwm6grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA19__PWM6_OUT		0x01010
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__UART4_DCE_TX		0x1b0b0
+			MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX	0x1b0b0
+			MX6UL_PAD_LCD_HSYNC__UART4_DCE_CTS	0x1b0b0
+			MX6UL_PAD_LCD_VSYNC__UART4_DCE_RTS	0x1b0b0
+			MX6UL_PAD_LCD_RESET__GPIO3_IO04		0x1b0b0
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC	0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_WP_B__USDHC1_RESET_B	0x17099
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x1f099
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10099
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17099
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17099
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17099
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17099
+			MX6UL_PAD_NAND_READY_B__USDHC1_DATA4	0x17099
+			MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5	0x17099
+			MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6	0x17099
+			MX6UL_PAD_NAND_CLE__USDHC1_DATA7	0x17099
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_VSYNC__USDHC2_CLK		0x100b9
+			MX6UL_PAD_CSI_HSYNC__USDHC2_CMD		0x170b9
+			MX6UL_PAD_CSI_DATA00__USDHC2_DATA0	0x170b9
+			MX6UL_PAD_CSI_DATA01__USDHC2_DATA1	0x170b9
+			MX6UL_PAD_CSI_DATA02__USDHC2_DATA2	0x170b9
+			MX6UL_PAD_CSI_DATA03__USDHC2_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_vbus: vbus0grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0x030b0
+		>;
+	};
+
+	pinctrl_wifi_npd: wifigrp {
+		fsl,pins = <
+			/* WL_REG_ON */
+			MX6UL_PAD_CSI_DATA04__GPIO4_IO25	0x03020
+		>;
+	};
+};
+
+&iomuxc_snvs {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_snvs_hog>;
+
+	pinctrl_snvs_hog: snvs-hog-grp {
+		fsl,pins = <
+			/* Digital outputs */
+			MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x00020
+			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x00020
+			MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x00020
+			MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x00020
+			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x00020
+
+			/* Digital outputs fault feedback */
+			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x17000
+			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x17000
+			MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x17000
+			MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x17000
+			MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x17000
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-kontron-bl.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-kontron-bl.dts
new file mode 100644
index 000000000000..fa016465cdbc
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-kontron-bl.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2019 Kontron Electronics GmbH
+ */
+
+/dts-v1/;
+
+#include "imx6ull-kontron-sl.dtsi"
+#include "imx6ul-kontron-bl-common.dtsi"
+
+/ {
+	model = "Kontron BL i.MX6ULL (N641X S)";
+	compatible = "kontron,bl-imx6ull", "kontron,sl-imx6ull", "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-kontron-sl.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-kontron-sl.dtsi
new file mode 100644
index 000000000000..93f10eb3494f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-kontron-sl.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ */
+
+#include "imx6ull.dtsi"
+#include "imx6ul-kontron-sl-common.dtsi"
+
+/ {
+	model = "Kontron SL i.MX6ULL (N641X SOM)";
+	compatible = "kontron,sl-imx6ull", "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-myir-mys-6ulx-eval.dts
index 79cc45728cd2..79cc45728cd2 100644
--- a/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-myir-mys-6ulx-eval.dts
diff --git a/arch/arm/boot/dts/imx6ull-myir-mys-6ulx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-myir-mys-6ulx.dtsi
index d03694feaf5c..83b9de17cee2 100644
--- a/arch/arm/boot/dts/imx6ull-myir-mys-6ulx.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-myir-mys-6ulx.dtsi
@@ -169,7 +169,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+	pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
 		fsl,pins = <
 			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
 			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
@@ -180,7 +180,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
 		fsl,pins = <
 			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
 			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
@@ -206,7 +206,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+	pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
 		fsl,pins = <
 			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100b9
 			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170b9
@@ -221,7 +221,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+	pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
 		fsl,pins = <
 			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100f9
 			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170f9
diff --git a/arch/arm/boot/dts/imx6ull-opos6ul.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-opos6ul.dtsi
index 155f941f2811..155f941f2811 100644
--- a/arch/arm/boot/dts/imx6ull-opos6ul.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-opos6ul.dtsi
diff --git a/arch/arm/boot/dts/imx6ull-opos6uldev.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-opos6uldev.dts
index 198fdb72641b..198fdb72641b 100644
--- a/arch/arm/boot/dts/imx6ull-opos6uldev.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-opos6uldev.dts
diff --git a/arch/arm/boot/dts/imx6ull-phytec-phycore-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-phycore-som.dtsi
index 56cd16e5a77f..56cd16e5a77f 100644
--- a/arch/arm/boot/dts/imx6ull-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-phycore-som.dtsi
diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin-ff-rdk-emmc.dts
index 8e2a4c5d7765..8e2a4c5d7765 100644
--- a/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin-ff-rdk-emmc.dts
diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin-ff-rdk-nand.dts
index c8d3eff9ed4b..1d7362b5ac91 100644
--- a/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin-ff-rdk-nand.dts
@@ -10,6 +10,7 @@
 #include "imx6ull-phytec-segin.dtsi"
 #include "imx6ull-phytec-segin-peb-eval-01.dtsi"
 #include "imx6ull-phytec-segin-peb-av-02.dtsi"
+#include "imx6ull-phytec-segin-peb-wlbt-05.dtsi"
 
 / {
 	model = "PHYTEC phyBOARD-Segin i.MX6 ULL Full Featured with NAND";
diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin-lc-rdk-nand.dts
index e168494e0a6d..4bcbae024d8d 100644
--- a/arch/arm/boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin-lc-rdk-nand.dts
@@ -9,6 +9,7 @@
 #include "imx6ull-phytec-phycore-som.dtsi"
 #include "imx6ull-phytec-segin.dtsi"
 #include "imx6ull-phytec-segin-peb-eval-01.dtsi"
+#include "imx6ull-phytec-segin-peb-wlbt-05.dtsi"
 
 / {
 	model = "PHYTEC phyBOARD-Segin i.MX6 ULL Low Cost with NAND";
diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-peb-av-02.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin-peb-av-02.dtsi
index 06bb7f327780..06bb7f327780 100644
--- a/arch/arm/boot/dts/imx6ull-phytec-segin-peb-av-02.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin-peb-av-02.dtsi
diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-peb-eval-01.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin-peb-eval-01.dtsi
index ff08d95a1aa2..ff08d95a1aa2 100644
--- a/arch/arm/boot/dts/imx6ull-phytec-segin-peb-eval-01.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin-peb-eval-01.dtsi
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin-peb-wlbt-05.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin-peb-wlbt-05.dtsi
new file mode 100644
index 000000000000..df25814a3371
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin-peb-wlbt-05.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2021 PHYTEC Messtechnik GmbH
+ * Author: Yunus Bas <y.bas@phytec.de>
+ */
+
+#include "imx6ul-phytec-segin-peb-wlbt-05.dtsi"
+
+&iomuxc {
+	/delete-node/ wlgrp;
+};
+
+&iomuxc_snvs {
+	pinctrl_wl: wlgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x3031
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin.dtsi
index e287a0453b5f..e287a0453b5f 100644
--- a/arch/arm/boot/dts/imx6ull-phytec-segin.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-segin.dtsi
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri-emmc.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri-emmc.dts
new file mode 100644
index 000000000000..1610f3892d9e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri-emmc.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2021 PHYTEC Messtechnik GmbH
+ * Author: Alexander Bauer <a.bauer@phytec.de>
+ */
+
+/dts-v1/;
+#include "imx6ull-phytec-tauri.dtsi"
+
+/ {
+	model = "PHYTEC phyGate-Tauri i.MX6 UltraLite";
+	compatible = "phytec,imx6ull-phygate-tauri-emmc",
+		     "phytec,imx6ull-phygate-tauri",
+		     "phytec,imx6ull-pcl063", "fsl,imx6ull";
+};
+
+/* EMMC-Version */
+&usdhc2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri-nand.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri-nand.dts
new file mode 100644
index 000000000000..92e7d38d5637
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri-nand.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2021 PHYTEC Messtechnik GmbH
+ * Author: Alexander Bauer <a.bauer@phytec.de>
+ */
+
+/dts-v1/;
+#include "imx6ull-phytec-tauri.dtsi"
+
+/ {
+	model = "PHYTEC phyGate-Tauri i.MX6 UltraLite";
+	compatible = "phytec,imx6ull-phygate-tauri-nand",
+		     "phytec,imx6ull-phygate-tauri",
+		     "phytec,imx6ull-pcl063", "fsl,imx6ull";
+};
+
+/* NAND-Version */
+&gpmi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi
new file mode 100644
index 000000000000..6fd68970c0b4
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi
@@ -0,0 +1,582 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2021 PHYTEC Messtechnik GmbH
+ * Author: Alexander Bauer <a.bauer@phytec.de>
+ */
+
+/dts-v1/;
+#include "imx6ull.dtsi"
+#include "imx6ull-phytec-phycore-som.dtsi"
+
+/ {
+	aliases {
+		rtc0 = &i2c_rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key {
+			label = "KEY-A";
+			gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_A>;
+			wakeup-source;
+		};
+	};
+
+	reg_adc1_vref_3v3: regulator-vref-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vref-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_s25fl064_hold: regulator-s25fl064-hold {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_s25fl064_hold>;
+		compatible = "regulator-fixed";
+		regulator-name = "s25fl064_hold";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 17 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_usb_hub_vbus: regulator-hub-otg1-vbus {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbhubpwr>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_hub_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg1pwr>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	user_leds: user-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_user_leds>,
+			    <&pinctrl_user_leds_snvs>;
+
+		user-led1 {
+			label = "yellow";
+			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+		};
+
+		user-led2 {
+			label = "red";
+			gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+		};
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&ecspi1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>,
+		    <&pinctrl_ecspi1_cs>;
+	cs-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>,
+		   <&gpio3 10 GPIO_ACTIVE_LOW>,
+		   <&gpio3 11 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tpm_tis: tpm@1 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpm>;
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <1>;
+		spi-max-frequency = <20000000>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	s25fl064: flash@2 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <2>;
+		spi-max-frequency = <40000000>;
+		m25p,fast-read;
+		status = "disabled";
+	};
+};
+
+&ecspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	cs-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+	dmas = <&sdma 7 8 0>,
+	       <&sdma 8 8 0>;
+	dma-names = "rx", "tx";
+	status = "okay";
+};
+
+&ethphy1 {
+	status = "okay";
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy2>;
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	tmp102: tmp@49 {
+		compatible = "ti,tmp102";
+		reg = <0x49>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tempsense>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		#thermal-sensor-cells = <1>;
+	};
+
+	i2c_rtc: rtc@68 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc_int>;
+		compatible = "microcrystal,rv4162";
+		reg = <0x68>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	sda-gpios = <&gpio1 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio1 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	sda-gpios = <&gpio3 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio3 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c4 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	sda-gpios = <&gpio3 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio3 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&mdio {
+	ethphy2: ethernet-phy@2 {
+		reg = <2>;
+		micrel,led-mode = <1>;
+		clocks = <&clks IMX6UL_CLK_ENET2_REF>;
+		clock-names = "rmii-ref";
+		status = "okay";
+	};
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm6>;
+	status = "okay";
+};
+
+&pwm7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm7>;
+	status = "okay";
+};
+
+&pwm8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm8>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+/* UART4 * RS485  */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	rts-gpios = <&gpio3 2 GPIO_ACTIVE_HIGH>;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+/* UART5 * RS232  */
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart7>;
+	status = "okay";
+};
+
+/* USB */
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1>;
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_hub_vbus>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
+
+&usdhc2 {
+	status = "disabled";
+};
+
+&iomuxc_snvs {
+	pinctrl_rtc_int: rtcintgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x17059
+		>;
+	};
+
+	pinctrl_stmpe: stmpegrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x17059
+		>;
+	};
+
+	pinctrl_tempsense: tempsensegrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x17059
+		>;
+	};
+
+	pinctrl_tpm: tpmgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x17059
+		>;
+	};
+
+	pinctrl_usbhubpwr: usbhubpwrgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x17059
+		>;
+	};
+
+	pinctrl_user_leds_snvs: user_ledsgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x79
+		>;
+	};
+};
+
+&iomuxc {
+	pinctrl_gpio: gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA05__GPIO4_IO26	0x17059  /* nUART_MUX_RS232 */
+			MX6UL_PAD_CSI_DATA04__GPIO4_IO25	0x17059  /* nUART_MUX_DUAL_RX_TX */
+		>;
+	};
+
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x79
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK	0x100b1
+			MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO	0x100b1
+			MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI	0x100b1
+			MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20	0x10b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK	0x100b1
+			MX6UL_PAD_LCD_DATA23__ECSPI1_MISO	0x100b1
+			MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI	0x100b1
+		>;
+	};
+
+	pinctrl_ecspi1_cs: ecspi1csgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA21__GPIO3_IO26	0x10b0
+			MX6UL_PAD_LCD_DATA05__GPIO3_IO10	0x10b0
+			MX6UL_PAD_LCD_DATA06__GPIO3_IO11	0x10b0
+		>;
+	};
+
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b010
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b010
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b010
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b010
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x0b0b0
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x0b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA10__FLEXCAN2_TX	0x0b0b0
+			MX6UL_PAD_LCD_DATA11__FLEXCAN2_RX	0x0b0b0
+		>;
+	};
+
+	princtrl_flexcan2_en: flexcan2engrp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x17059
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__I2C2_SCL	0xb0
+			MX6UL_PAD_GPIO1_IO01__I2C2_SDA	0xb0
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__GPIO1_IO00	0xb0
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01	0xb0
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA01__I2C3_SCL	0xb0
+			MX6UL_PAD_LCD_DATA00__I2C3_SDA	0xb0
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA01__GPIO3_IO06	0xb0
+			MX6UL_PAD_LCD_DATA00__GPIO3_IO05	0xb0
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA03__I2C4_SCL	0xb0
+			MX6UL_PAD_LCD_DATA02__I2C4_SDA	0xb0
+		>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA03__GPIO3_IO08	0xb0
+			MX6UL_PAD_LCD_DATA02__GPIO3_IO07	0xb0
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO04__PWM3_OUT	0x0b0b0
+		>;
+	};
+
+	pinctrl_pwm6: pwm6grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TDI__PWM6_OUT	0x0b0b0
+		>;
+	};
+
+	pinctrl_pwm7: pwm7grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TCK__PWM7_OUT	0x0b0b0
+		>;
+	};
+
+	pinctrl_pwm8: pwm8grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TRST_B__PWM8_OUT	0x0b0b0
+		>;
+	};
+
+	pinctrl_s25fl064_hold: s25fl064holdgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA12__GPIO3_IO17	0x100b1
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
+			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
+			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x11088
+			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x11088
+			MX6UL_PAD_JTAG_TMS__SAI2_MCLK		0x17088
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__UART4_DCE_TX		0x1b0b1
+			MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX	0x1b0b1
+			MX6UL_PAD_LCD_HSYNC__GPIO3_IO02	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart7: uart7grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA16__UART7_DCE_TX	0x1b0b1
+			MX6UL_PAD_LCD_DATA17__UART7_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usb_otg1: usbotg1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA06__GPIO4_IO27	0x80
+		>;
+	};
+
+	pinctrl_usbotg1pwr: usbotg1pwrgrp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA07__GPIO4_IO28	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1100mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1200mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_user_leds: userledsgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0x79
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ull-pinfunc-snvs.h b/arch/arm/boot/dts/nxp/imx/imx6ull-pinfunc-snvs.h
index 54cfe72295aa..54cfe72295aa 100644
--- a/arch/arm/boot/dts/imx6ull-pinfunc-snvs.h
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-pinfunc-snvs.h
diff --git a/arch/arm/boot/dts/imx6ull-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx6ull-pinfunc.h
index eb025a9d4759..7328d4ef8559 100644
--- a/arch/arm/boot/dts/imx6ull-pinfunc.h
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-pinfunc.h
@@ -82,6 +82,6 @@
 #define MX6ULL_PAD_CSI_DATA04__ESAI_TX_FS                         0x01F4 0x0480 0x0000 0x9 0x0
 #define MX6ULL_PAD_CSI_DATA05__ESAI_TX_CLK                        0x01F8 0x0484 0x0000 0x9 0x0
 #define MX6ULL_PAD_CSI_DATA06__ESAI_TX5_RX0                       0x01FC 0x0488 0x0000 0x9 0x0
-#define MX6ULL_PAD_CSI_DATA07__ESAI_T0                            0x0200 0x048C 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA07__ESAI_TX0                           0x0200 0x048C 0x0000 0x9 0x0
 
 #endif /* __DTS_IMX6ULL_PINFUNC_H */
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-emmc.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-emmc.dts
new file mode 100644
index 000000000000..cfcd8783c31d
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-emmc.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2024 Linumiz
+ * Author: Parthiban <parthiban@linumiz.com>
+ */
+
+/dts-v1/;
+#include "imx6ull.dtsi"
+#include "imx6ull-seeed-npi.dtsi"
+#include "imx6ull-seeed-npi-dev-board.dtsi"
+
+/ {
+	model = "Seeed NPi iMX6ULL Dev Board with NAND";
+	compatible = "seeed,imx6ull-seeed-npi-emmc", "seeed,imx6ull-seeed-npi", "fsl,imx6ull";
+};
+
+&usdhc2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-nand.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-nand.dts
new file mode 100644
index 000000000000..87c9434b09c5
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-nand.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2024 Linumiz
+ * Author: Parthiban <parthiban@linumiz.com>
+ */
+
+/dts-v1/;
+#include "imx6ull.dtsi"
+#include "imx6ull-seeed-npi.dtsi"
+#include "imx6ull-seeed-npi-dev-board.dtsi"
+
+/ {
+	model = "Seeed NPi iMX6ULL Dev Board with NAND";
+	compatible = "seeed,imx6ull-seeed-npi-nand", "seeed,imx6ull-seeed-npi", "fsl,imx6ull";
+};
+
+&gpmi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board.dtsi
new file mode 100644
index 000000000000..28fddbcdc55e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board.dtsi
@@ -0,0 +1,424 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2024 Linumiz
+ * Author: Parthiban <parthiban@linumiz.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	gpio_buttons: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_button>;
+
+		button-0 {
+			gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
+			label = "SW2";
+			linux,code = <KEY_A>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-blue {
+			gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
+			label = "LED_B";
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+		};
+
+		led-green {
+			gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
+			label = "LED_G";
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+		};
+
+		led-red {
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+			label = "LED_R";
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+		};
+
+		led-user {
+			gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
+			label = "User";
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+		};
+	};
+
+	reg_5v_sys: regulator-5v-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&reg_5v_sys>;
+	};
+
+	reg_3v3_in: regulator-3v3-in {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3_IN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_5v_sys>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_3v3_in>;
+	};
+
+	reg_sd1_vmmc: regulator-sd1-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3_SD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_vmmc>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&reg_3v3>;
+	};
+};
+
+&csi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_csi1>;
+	status = "disabled"; /* LED Blue & Green shared */
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@2 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <2>;
+			micrel,led-mode = <1>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
+		};
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			micrel,led-mode = <1>;
+			clocks = <&clks IMX6UL_CLK_ENET2_REF>;
+			clock-names = "rmii-ref";
+		};
+	};
+};
+
+&lcdif {
+	pinctrl-0 = <&pinctrl_lcdif>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+&reg_dcdc_3v3 {
+	vin-supply = <&reg_3v3_in>;
+};
+
+&sai2 {
+	assigned-clock-rates = <320000000>;
+	assigned-clocks = <&clks IMX6UL_CLK_PLL3_PFD2>;
+	pinctrl-0 = <&pinctrl_sai2>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1_id>;
+	dr_mode = "otg";
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_usdhc1_cd>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_usdhc1_cd>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_usdhc1_cd>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_sd1_vmmc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_button: buttongrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x0b0b0
+		>;
+	};
+
+	pinctrl_csi1: csi1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK	0x1b088
+			MX6UL_PAD_CSI_VSYNC__CSI_VSYNC		0x1b088
+			MX6UL_PAD_CSI_HSYNC__CSI_HSYNC		0x1b088
+			MX6UL_PAD_CSI_DATA00__CSI_DATA02	0x1b088
+			MX6UL_PAD_CSI_DATA01__CSI_DATA03	0x1b088
+			MX6UL_PAD_CSI_DATA02__CSI_DATA04	0x1b088
+			MX6UL_PAD_CSI_DATA03__CSI_DATA05	0x1b088
+			MX6UL_PAD_CSI_DATA04__CSI_DATA06	0x1b088
+			MX6UL_PAD_CSI_DATA05__CSI_DATA07	0x1b088
+			MX6UL_PAD_CSI_DATA06__CSI_DATA08	0x1b088
+			MX6UL_PAD_CSI_DATA07__CSI_DATA09	0x1b088
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN      0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER      0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN      0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1  0x4001b031
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC         0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO        0x1b0b0
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN      0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER      0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN      0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2  0x4001b031
+		>;
+	};
+
+	pinctrl_gpio_leds: ledgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0x0b0b0
+			MX6UL_PAD_CSI_VSYNC__GPIO4_IO19		0x0b0b0
+			MX6UL_PAD_CSI_HSYNC__GPIO4_IO20		0x0b0b0
+			MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x0b0b0
+		>;
+	};
+
+	pinctrl_lcdif: lcdif-grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x79
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x79
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x79
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x79
+			MX6UL_PAD_LCD_RESET__LCDIF_RESET	0x79
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00	0x79
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01	0x79
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x79
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x79
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x79
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x79
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x79
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x79
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08	0x79
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09	0x79
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x79
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x79
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x79
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x79
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x79
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x79
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16	0x79
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17	0x79
+			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18	0x79
+			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19	0x79
+			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20	0x79
+			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21	0x79
+			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22	0x79
+			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23	0x79
+			MX6UL_PAD_GPIO1_IO08__GPIO1_IO08	0x79
+		>;
+	};
+
+	pinctrl_reg_vmmc: usdhc1regvmmc-grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO09__GPIO1_IO09	0x17059
+		>;
+	};
+
+	pinctrl_sai2: sai2-grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x130b0
+			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
+			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
+			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x120b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
+			MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS	0x1b0b1
+			MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x1b0b1
+			MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS	0x1b0b1
+			MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usb_otg1_id: usbotg1idgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc1_cd: usdhc1cd-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi.dtsi
new file mode 100644
index 000000000000..278152875f8e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi.dtsi
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2024 Linumiz
+ * Author: Parthiban <parthiban@linumiz.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Seeed NPi-iMX6ULL Dev Board";
+	compatible = "seeed,imx6ull-seeed-npi", "fsl,imx6ull";
+
+	reg_dcdc_3v3: regulator-dcdc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "DCDC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_dram_1v35: regulator-dram-1v35 {
+		compatible = "regulator-fixed";
+		regulator-name = "DRAM_1V35";
+		regulator-min-microvolt = <1350000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		vin-supply = <&reg_dcdc_3v3>;
+	};
+
+	reg_vdd_arm_soc_in: regulator-vdd-arm-soc-in {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_ARM_SOC_IN";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		vin-supply = <&reg_dcdc_3v3>;
+	};
+
+	reg_dcdc_1v8: regulator-dcdc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "DCDC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&reg_dcdc_3v3>;
+	};
+
+	reg_sd1_vqmmc: regulator-sd1-vqmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "NVCC_SD";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_vqmmc>;
+		regulator-always-on;
+		vin-supply = <&reg_dcdc_1v8>;
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "disabled";
+};
+
+&usdhc1 {
+	vqmmc-supply = <&reg_sd1_vqmmc>;
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	keep-power-in-suspend;
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_DQS__RAWNAND_DQS		0x0b0b1
+			MX6UL_PAD_NAND_CLE__RAWNAND_CLE		0x0b0b1
+			MX6UL_PAD_NAND_ALE__RAWNAND_ALE		0x0b0b1
+			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B	0x0b0b1
+			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B	0x0b000
+			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B	0x0b0b1
+			MX6UL_PAD_NAND_CE1_B__RAWNAND_CE1_B	0x0b0b1
+			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B	0x0b0b1
+			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B	0x0b0b1
+			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0x0b0b1
+			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01	0x0b0b1
+			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02	0x0b0b1
+			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03	0x0b0b1
+			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04	0x0b0b1
+			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05	0x0b0b1
+			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06   0x0b0b1
+			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07	0x0b0b1
+		>;
+	};
+
+	pinctrl_reg_vqmmc: usdhc1regvqmmcgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO05__GPIO1_IO05	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x10069
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x17059
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x17059
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x17059
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100b9
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170b9
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170b9
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170b9
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170b9
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170b9
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x170b9
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x170b9
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x170b9
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100f9
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170f9
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170f9
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170f9
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170f9
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170f9
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x170f9
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x170f9
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x170f9
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x170f9
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-common.dtsi
new file mode 100644
index 000000000000..5248a058230c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-common.dtsi
@@ -0,0 +1,853 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright (C) 2023 chargebyte GmbH
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "imx6ull.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &usdhc2; /* eMMC */
+	};
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		pinctrl-0 = <&pinctrl_emmc_rst>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_dcdc_3v3: regulator-dcdc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "dcdc-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "ldo-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_status_leds>;
+
+		led-1 {
+			function = LED_FUNCTION_BOOT;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "timer";
+		};
+
+		led-2 {
+			function = LED_FUNCTION_PROGRAMMING;
+			color = <LED_COLOR_ID_YELLOW>;
+			gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-3 {
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&adc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc_motor
+		     &pinctrl_adc_cp
+		     &pinctrl_adc_pp>;
+	vref-supply = <&vgen1_reg>;
+	status = "okay";
+};
+
+&cpu0 {
+	clock-frequency = <792000000>;
+};
+
+&ecspi2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	num-cs = <3>;
+	cs-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH
+		    &gpio3 2  GPIO_ACTIVE_HIGH
+		    &gpio3 4  GPIO_ACTIVE_HIGH>;
+};
+
+&ecspi4 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi4>;
+	num-cs = <1>;
+	cs-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1
+		     &pinctrl_enet1_phy_rst
+		     &pinctrl_enet_mdio>;
+	phy-supply = <&reg_dcdc_3v3>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <25>;
+	phy-handle = <&ethphy0>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_enet1_phy_int>;
+			interrupt-parent = <&gpio2>;
+			interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+			interrupts-extended = <&gpio2 7 IRQ_TYPE_EDGE_FALLING>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
+			max-speed = <100>;
+			smsc,disable-energy-detect;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names = "",				/* 0 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",				/* 5 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",				/* 10 */
+			  "",
+			  "",
+			  "CP_INVERT",
+			  "",
+			  "",				/* 15 */
+			  "",
+			  "",
+			  "",
+			  "MOTOR_1_FAULT_N",
+			  "",				/* 20 */
+			  "",
+			  "ROTARY_SWITCH_1_2_N",
+			  "ROTARY_SWITCH_1_4_N",
+			  "ROTARY_SWITCH_1_8_N",
+			  "MOTOR_2_FAULT_N";		/* 25 */
+};
+
+&gpio3 {
+	gpio-line-names = "",				/* 0 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",				/* 5 */
+			  "EXT_GPIO",
+			  "MOTOR_1_DRIVER_IN1_N",
+			  "MOTOR_1_DRIVER_IN2",
+			  "MOTOR_2_DRIVER_IN1",
+			  "STM32_BOOT0",		/* 10 */
+			  "STM32_RST_N",
+			  "RELAY_1_ENABLE",
+			  "RELAY_2_ENABLE",
+			  "",
+			  "",				/* 15 */
+			  "QCA700X_MAINS_BOOTLOADER_N",
+			  "QCA700X_CP_RST_N",
+			  "QCA700X_CP_BOOTLOADER_N",
+			  "",
+			  "DIGITAL_OUT_1",		/* 20 */
+			  "DIGITAL_OUT_2",
+			  "DIGITAL_OUT_3",
+			  "DIGITAL_OUT_4",
+			  "DIGITAL_OUT_5",
+			  "DIGITAL_OUT_6",		/* 25 */
+			  "ROTARY_SWITCH_2_8_N",
+			  "ROTARY_SWITCH_2_4_N",
+			  "ROTARY_SWITCH_2_2_N";
+};
+
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pmic>;
+
+	gpio-line-names = "",				/* 0 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",				/* 5 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",				/* 10 */
+			  "",
+			  "",
+			  "BOARD_VARIANT_1",
+			  "BOARD_VARIANT_2",
+			  "BOARD_VARIANT_0",		/* 15 */
+			  "BOARD_VARIANT_3",
+			  "",
+			  "ROTARY_SWITCH_2_1_N",
+			  "",
+			  "DIGITAL_IN_5",		/* 20 */
+			  "",
+			  "",
+			  "DIGITAL_IN_6",
+			  "",
+			  "DIGITAL_IN_1",		/* 25 */
+			  "DIGITAL_IN_2",
+			  "DIGITAL_IN_4",
+			  "DIGITAL_IN_3";
+
+	pmic-int-hog {
+		gpio-hog;
+		gpios = <19 0>;
+		input;
+	};
+};
+
+&gpio5 {
+	gpio-line-names = "ROTARY_SWITCH_1_1_N",	/* 0 */
+			  "",
+			  "RELAY_2_SENSE",
+			  "RELAY_1_SENSE",
+			  "",
+			  "",				/* 5 */
+			  "",
+			  "QCA700X_MAINS_RST_N",
+			  "MOTOR_2_DRIVER_IN2",
+			  "",
+			  "CP_POSITIVE_PEAK_RST",	/* 10 */
+			  "CP_NEGATIVE_PEAK_RST";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio1 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pfuze3001: pmic@8 {
+		compatible = "fsl,pfuze3001";
+		reg = <0x08>;
+
+		regulators {
+			sw1_reg: sw1 {
+				regulator-name = "SW1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-name = "SW2";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-name = "SW3";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-name = "VSNVS";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-name = "VLDO1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-name = "VLDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-name = "VCCSD";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-name = "V33";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-name = "VLDO3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-name = "VLDO4";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	onewire@18 {
+		compatible = "maxim,ds2484";
+		reg = <0x18>;
+	};
+
+	accelerometer@19 {
+		compatible = "st,iis328dq", "st,h3lis331dl-accel";
+		reg = <0x19>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accelerometer_int1_snvs>;
+		vdd-supply = <&reg_dcdc_3v3>;
+		vddio-supply = <&reg_dcdc_3v3>;
+		st,drdy-int-pin = <1>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <5 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_board_var
+		     &pinctrl_digital_input
+		     &pinctrl_digital_output
+		     &pinctrl_gpio_motor
+		     &pinctrl_hog_pins
+		     &pinctrl_rotary_switch1
+		     &pinctrl_rotary_switch2>;
+
+	pinctrl_adc_cp: adc-cpgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02            0xb0
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03            0xb0
+		>;
+	};
+
+	pinctrl_adc_motor: adc-motorgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__GPIO1_IO00            0xb0
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01            0xb0
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04            0xb0
+		>;
+	};
+
+	pinctrl_adc_pp: adc-ppgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO05__GPIO1_IO05            0xb0
+		>;
+	};
+
+	pinctrl_board_var: board-vargrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_CLE__GPIO4_IO15              0xb0
+			MX6UL_PAD_NAND_CE0_B__GPIO4_IO13            0xb0
+			MX6UL_PAD_NAND_CE1_B__GPIO4_IO14            0xb0
+			MX6UL_PAD_NAND_DQS__GPIO4_IO16              0xb0
+		>;
+	};
+
+	pinctrl_digital_input: digital-inputgrp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA04__GPIO4_IO25            0xb0
+			MX6UL_PAD_CSI_DATA05__GPIO4_IO26            0xb0
+			MX6UL_PAD_CSI_DATA07__GPIO4_IO28            0xb0
+			MX6UL_PAD_CSI_DATA06__GPIO4_IO27            0xb0
+			MX6UL_PAD_CSI_HSYNC__GPIO4_IO20             0xb0
+			MX6UL_PAD_CSI_DATA02__GPIO4_IO23            0xb0
+		>;
+	};
+
+	pinctrl_digital_output: digital-outputgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA15__GPIO3_IO20            0x400000b0
+			MX6UL_PAD_LCD_DATA16__GPIO3_IO21            0x400000b0
+			MX6UL_PAD_LCD_DATA17__GPIO3_IO22            0x400000b0
+			MX6UL_PAD_LCD_DATA18__GPIO3_IO23            0x400000b0
+			MX6UL_PAD_LCD_DATA19__GPIO3_IO24            0x400000b0
+			MX6UL_PAD_LCD_DATA20__GPIO3_IO25            0x400000b0
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29         0x10b0
+			MX6UL_PAD_LCD_HSYNC__GPIO3_IO02             0xb0
+			MX6UL_PAD_LCD_RESET__GPIO3_IO04             0xb0
+			MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK        0x10b0
+			MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO        0x10b0
+			MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI        0x10b0
+		>;
+	};
+
+	pinctrl_ecspi4: ecspi4grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15           0x10b0
+			MX6UL_PAD_ENET2_TX_DATA1__ECSPI4_SCLK       0x10b0
+			MX6UL_PAD_ENET2_TX_CLK__ECSPI4_MISO         0x10b0
+			MX6UL_PAD_ENET2_TX_EN__ECSPI4_MOSI          0x10b0
+		>;
+	};
+
+	pinctrl_emmc_rst: emmc-rstgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10              0x400010b0
+		>;
+	};
+
+	pinctrl_enet_mdio: enet-mdiogrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO            0x10b0
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC             0x10b0
+		>;
+	};
+
+	pinctrl_enet1_phy_int: enet1-phy-intgrp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07           0x10b0
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00     0x100b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01     0x100b0
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN          0x100b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1      0x400000b1
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00     0xb0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01     0xb0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN          0xb0
+		>;
+	};
+
+	pinctrl_ext_uart: ext-uartgrp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_TX_DATA0__UART7_DCE_RX      0xb0
+			MX6UL_PAD_ENET2_RX_EN__UART7_DCE_TX         0xb0
+		>;
+	};
+
+	pinctrl_fan_enable: fan-enablegrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__GPIO3_IO05            0x400000b0
+		>;
+	};
+
+	pinctrl_gpio_motor: gpio-motorgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA02__GPIO3_IO07            0x400000b0
+			MX6UL_PAD_LCD_DATA03__GPIO3_IO08            0x400000b0
+			MX6UL_PAD_LCD_DATA04__GPIO3_IO09            0x400000b0
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19           0xb0
+			MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25         0xb0
+		>;
+	};
+
+	pinctrl_hog_pins: hog-pinsgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA07__GPIO3_IO12            0x400000b0
+			MX6UL_PAD_LCD_DATA08__GPIO3_IO13            0x400000b0
+			MX6UL_PAD_JTAG_TDI__GPIO1_IO13              0x400070a0
+			MX6UL_PAD_LCD_DATA05__GPIO3_IO10            0x400000b0
+			MX6UL_PAD_LCD_DATA06__GPIO3_IO11            0x400000b0
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_RX_DATA__I2C4_SDA           0x400008b0
+			MX6UL_PAD_UART2_TX_DATA__I2C4_SCL           0x400008b0
+		>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4-gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21         0x400008b0
+			MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20         0x400008b0
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO08__USDHC2_VSELECT        0x70b1
+			MX6UL_PAD_CSI_VSYNC__GPIO4_IO19             0xb0
+		>;
+	};
+
+	pinctrl_pwm_cp: pinctrl-pwm-cpgrp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TRST_B__PWM8_OUT             0x60a0
+		>;
+	};
+
+	pinctrl_pwm_digital_input_ref: pwm-digital-input-refgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO09__PWM2_OUT              0xb0
+		>;
+	};
+
+	pinctrl_pwm_fan: pwm-fangrp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TCK__PWM7_OUT                0x60a0
+		>;
+	};
+
+	pinctrl_qca700x_cp_btld: qca700x-cp-btldgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA13__GPIO3_IO18            0x400000b0
+		>;
+	};
+
+	pinctrl_qca700x_cp_int: qca700x-cp-intgrp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_DATA1__GPIO2_IO19             0x10b0
+		>;
+	};
+
+	pinctrl_qca700x_cp_rst: qca700x-cp-rstgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA12__GPIO3_IO17            0x400000b0
+		>;
+	};
+
+	pinctrl_qca700x_mains_btld: qca700x-mains-btldgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA11__GPIO3_IO16            0x400000b0
+		>;
+	};
+
+	pinctrl_rotary_switch1: rotary-switch1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_CTS_B__GPIO1_IO22           0xb0
+			MX6UL_PAD_UART2_RTS_B__GPIO1_IO23           0xb0
+			MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24         0xb0
+		>;
+	};
+
+	pinctrl_rotary_switch2: rotary-switch2grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18            0xb0
+			MX6UL_PAD_LCD_DATA23__GPIO3_IO28            0xb0
+			MX6UL_PAD_LCD_DATA22__GPIO3_IO27            0xb0
+			MX6UL_PAD_LCD_DATA21__GPIO3_IO26            0xb0
+		>;
+	};
+
+	pinctrl_rs485_1: rs485-1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18           0xb0
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX       0xb0
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX       0xb0
+		>;
+	};
+
+	pinctrl_rs485_2: rs485-2grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA03__GPIO4_IO24            0x10b0
+			MX6UL_PAD_CSI_DATA01__UART5_DCE_RX          0x10b0
+			MX6UL_PAD_CSI_DATA00__UART5_DCE_TX          0x10b0
+		>;
+	};
+
+	pinctrl_status_leds: status-ledsgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA09__GPIO3_IO14            0xb0
+			MX6UL_PAD_LCD_DATA10__GPIO3_IO15            0xb0
+			MX6UL_PAD_LCD_DATA14__GPIO3_IO19            0xb0
+		>;
+	};
+
+	pinctrl_stm32: stm32grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_DATA1__UART6_DCE_RX      0x10b0
+			MX6UL_PAD_ENET2_RX_DATA0__UART6_DCE_TX      0x10b0
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__UART4_DTE_RX             0xb0
+			MX6UL_PAD_LCD_ENABLE__UART4_DTE_TX          0xb0
+		>;
+	};
+
+	pinctrl_usb: usbgrp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CLK__USB_OTG1_OC              0x70b0
+			MX6UL_PAD_SD1_DATA0__ANATOP_OTG1_ID         0x70b0
+		>;
+	};
+
+	pinctrl_usb_pwr: usb-pwrgrp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USB_OTG1_PWR             0xb0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK             0x7071
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD             0x7071
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0         0x7071
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1         0x7071
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2         0x7071
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3         0x7071
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4         0x7071
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5         0x7071
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6         0x7071
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7         0x7071
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK             0x70b1
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD             0x70b1
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0         0x70b1
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1         0x70b1
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2         0x70b1
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3         0x70b1
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4         0x70b1
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5         0x70b1
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6         0x70b1
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7         0x70b1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK             0x70f1
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD             0x70f1
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0         0x70f1
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1         0x70f1
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2         0x70f1
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3         0x70f1
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4         0x70f1
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5         0x70f1
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6         0x70f1
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7         0x70f1
+		>;
+	};
+
+	pinctrl_wdog2: wdoggrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_VSYNC__WDOG2_WDOG_B           0x10b0
+		>;
+	};
+};
+
+&iomuxc_snvs {
+	pinctrl-names = "default_snvs";
+	pinctrl-0 = <&pinctrl_cp_peak_snvs
+		     &pinctrl_gpio_motor_snvs
+		     &pinctrl_relay_sense_snvs
+		     &pinctrl_rotary_switch1_snvs>;
+
+	pinctrl_accelerometer_int1_snvs: accelerometer-int1-snvsgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05         0x130a0
+		>;
+	};
+
+	pinctrl_cp_peak_snvs: cp-peak-snvsgrp {
+		fsl,pins = <
+			MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10           0x130a0
+			MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11           0x130a0
+		>;
+	};
+
+	pinctrl_enet1_phy_rst: enet1-phy-rstgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06         0x100a0
+		>;
+	};
+
+	pinctrl_fan_sense_snvs: fan-sense-snvsgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01         0x100a0
+		>;
+	};
+
+	pinctrl_gpio_motor_snvs: gpio-motor-snvsgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08         0x110a0
+		>;
+	};
+
+	pinctrl_qca700x_mains_int: qca700x-mains-intgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09         0x130a0
+		>;
+	};
+
+	pinctrl_qca700x_mains_rst: qca700x-mains-rstgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07         0x400100a0
+		>;
+	};
+
+	pinctrl_relay_sense_snvs: relay-sense-snvsgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03         0x100a0
+			MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02         0x100a0
+		>;
+	};
+
+	pinctrl_rotary_switch1_snvs: rotary-switch1-snvsgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00         0x110a0
+		>;
+	};
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_digital_input_ref>;
+	status = "okay";
+};
+
+&pwm8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_cp>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rs485_1>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	fsl,dte-mode;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rs485_2>;
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_stm32>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ext_uart>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb
+		     &pinctrl_usb_pwr>;
+	dr_mode = "host";
+	power-active-high;
+	over-current-active-low;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-cal-45-dn-ohms = <35>;
+	fsl,tx-cal-45-dp-ohms = <35>;
+};
+
+&usbphy2 {
+	fsl,tx-cal-45-dn-ohms = <35>;
+	fsl,tx-cal-45-dp-ohms = <35>;
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	vmmc-supply = <&sw2_reg>;
+	vqmmc-supply = <&reg_1v8>;
+	mmc-pwrseq = <&emmc_pwrseq>;
+	bus-width = <8>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	status = "okay";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&wdog2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog2>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-master.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-master.dts
new file mode 100644
index 000000000000..f9bbd589b66d
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-master.dts
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright (C) 2023 chargebyte GmbH
+
+#include "imx6ull-tarragon-common.dtsi"
+
+/ {
+	model = "chargebyte Tarragon Master";
+	compatible = "chargebyte,imx6ull-tarragon-master", "fsl,imx6ull";
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm7 0 40000 PWM_POLARITY_INVERTED>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_fan_sense_snvs>;
+		fan-supply = <&reg_fan>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	reg_fan: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "fan-supply";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_fan_enable>;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+};
+
+&ecspi2 {
+	status = "okay";
+
+	qca700x_cp: ethernet@0 {
+		reg = <0x0>;
+		compatible = "qca,qca7000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_qca700x_cp_int
+			     &pinctrl_qca700x_cp_rst
+			     &pinctrl_qca700x_cp_btld>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <19 IRQ_TYPE_EDGE_RISING>;
+		spi-cpha;
+		spi-cpol;
+		spi-max-frequency = <12000000>;
+	};
+};
+
+&ecspi4 {
+	status = "okay";
+
+	qca700x_mains: ethernet@0 {
+		reg = <0x0>;
+		compatible = "qca,qca7000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_qca700x_mains_int
+			     &pinctrl_qca700x_mains_rst
+			     &pinctrl_qca700x_mains_btld>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <9 IRQ_TYPE_EDGE_RISING>;
+		spi-cpha;
+		spi-cpol;
+		spi-max-frequency = <12000000>;
+	};
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&pwm7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_fan>;
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-micro.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-micro.dts
new file mode 100644
index 000000000000..e471c2005bee
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-micro.dts
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright (C) 2023 chargebyte GmbH
+
+#include "imx6ull-tarragon-common.dtsi"
+
+/ {
+	model = "chargebyte Tarragon Micro";
+	compatible = "chargebyte,imx6ull-tarragon-micro", "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-slave.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-slave.dts
new file mode 100644
index 000000000000..ef06619d7c86
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-slave.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright (C) 2023 chargebyte GmbH
+
+#include "imx6ull-tarragon-common.dtsi"
+
+/ {
+	model = "chargebyte Tarragon Slave";
+	compatible = "chargebyte,imx6ull-tarragon-slave", "fsl,imx6ull";
+};
+
+&ecspi2 {
+	status = "okay";
+
+	qca700x_cp: ethernet@0 {
+		reg = <0x0>;
+		compatible = "qca,qca7000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_qca700x_cp_int
+			     &pinctrl_qca700x_cp_rst
+			     &pinctrl_qca700x_cp_btld>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <19 IRQ_TYPE_EDGE_RISING>;
+		spi-cpha;
+		spi-cpol;
+		spi-max-frequency = <12000000>;
+	};
+};
+
+&fec1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-slavext.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-slavext.dts
new file mode 100644
index 000000000000..83db65bf630f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-slavext.dts
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright (C) 2023 chargebyte GmbH
+
+#include "imx6ull-tarragon-common.dtsi"
+
+/ {
+	model = "chargebyte Tarragon SlaveXT";
+	compatible = "chargebyte,imx6ull-tarragon-slavext", "fsl,imx6ull";
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm7 0 40000 PWM_POLARITY_INVERTED>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_fan_sense_snvs>;
+		fan-supply = <&reg_fan>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	reg_fan: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "fan-supply";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_fan_enable>;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+};
+
+&ecspi2 {
+	status = "okay";
+
+	qca700x_cp: ethernet@0 {
+		reg = <0x0>;
+		compatible = "qca,qca7000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_qca700x_cp_int
+			     &pinctrl_qca700x_cp_rst
+			     &pinctrl_qca700x_cp_btld>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <19 IRQ_TYPE_EDGE_RISING>;
+		spi-cpha;
+		spi-cpol;
+		spi-max-frequency = <12000000>;
+	};
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&pwm7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_fan>;
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-tqma6ull2-mba6ulx.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-tqma6ull2-mba6ulx.dts
new file mode 100644
index 000000000000..e593b7036fc7
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-tqma6ull2-mba6ulx.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/dts-v1/;
+
+#include "imx6ull-tqma6ull2.dtsi"
+#include "mba6ulx.dtsi"
+
+/ {
+	model = "TQ-Systems TQMa6ULL2 SoM on MBa6ULx board";
+	compatible = "tq,imx6ull-tqma6ull2-mba6ulx", "tq,imx6ull-tqma6ull2", "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-tqma6ull2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-tqma6ull2.dtsi
new file mode 100644
index 000000000000..8541cb3f3b3e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-tqma6ull2.dtsi
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include "imx6ull.dtsi"
+#include "imx6ul-tqma6ul-common.dtsi"
+#include "imx6ul-tqma6ulx-common.dtsi"
+
+/ {
+	model = "TQ-Systems TQMa6ULL2 SoM";
+	compatible = "tq,imx6ull-tqma6ull2", "fsl,imx6ull";
+};
+
+&usdhc2 {
+	fsl,tuning-step = <6>;
+	/* Errata ERR010450 Workaround */
+	max-frequency = <99000000>;
+	assigned-clocks = <&clks IMX6UL_CLK_USDHC2_SEL>, <&clks IMX6UL_CLK_USDHC2>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>;
+	assigned-clock-rates = <0>, <198000000>;
+};
+
+&iomuxc {
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x00017031
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x00017039
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x00017039
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x00017039
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x00017039
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x00017039
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x00017039
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x00017039
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x00017039
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x00017039
+			/* rst */
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x000170f1
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x000170f1
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x000170f1
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x000170f1
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x000170f1
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x000170f1
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x000170f1
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x000170f1
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x000170f1
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x000170f1
+			/* rst */
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x000170f1
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x000170f1
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x000170f1
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x000170f1
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x000170f1
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x000170f1
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x000170f1
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x000170f1
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x000170f1
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x000170f1
+			/* rst */
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-tqma6ull2l-mba6ulx.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-tqma6ull2l-mba6ulx.dts
new file mode 100644
index 000000000000..33437aae9822
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-tqma6ull2l-mba6ulx.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/dts-v1/;
+
+#include "imx6ull-tqma6ull2l.dtsi"
+#include "mba6ulx.dtsi"
+
+/ {
+	model = "TQ Systems TQMa6ULL2L SoM on MBa6ULx board";
+	compatible = "tq,imx6ull-tqma6ull2l-mba6ulx", "tq,imx6ull-tqma6ull2l", "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-tqma6ull2l.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-tqma6ull2l.dtsi
new file mode 100644
index 000000000000..be593d47e3b1
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-tqma6ull2l.dtsi
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include "imx6ull.dtsi"
+#include "imx6ul-tqma6ul-common.dtsi"
+#include "imx6ul-tqma6ulxl-common.dtsi"
+
+/ {
+	model = "TQ Systems TQMa6ULL2L SoM";
+	compatible = "tq,imx6ull-tqma6ull2l", "fsl,imx6ull";
+};
+
+&usdhc2 {
+	fsl,tuning-step = <6>;
+	/* Errata ERR010450 Workaround */
+	max-frequency = <99000000>;
+	assigned-clocks = <&clks IMX6UL_CLK_USDHC2_SEL>, <&clks IMX6UL_CLK_USDHC2>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>;
+	assigned-clock-rates = <0>, <198000000>;
+};
+
+&iomuxc {
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x00017031
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x00017039
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x00017039
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x00017039
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x00017039
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x00017039
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x00017039
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x00017039
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x00017039
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x00017039
+			/* rst */
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x000170f1
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x000170f1
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x000170f1
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x000170f1
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x000170f1
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x000170f1
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x000170f1
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x000170f1
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x000170f1
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x000170f1
+			/* rst */
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x000170f1
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x000170f1
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x000170f1
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x000170f1
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x000170f1
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x000170f1
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x000170f1
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x000170f1
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x000170f1
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x000170f1
+			/* rst */
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-uti260b.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-uti260b.dts
new file mode 100644
index 000000000000..e4576d509a5b
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-uti260b.dts
@@ -0,0 +1,566 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// Copyright (C) 2022-2024 Sebastian Reichel <sre@kernel.org>
+
+/dts-v1/;
+#include "imx6ull.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/clock/imx6ul-clock.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "UNI-T UTi260B Thermal Camera";
+	compatible = "uni-t,uti260b", "fsl,imx6ull";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	panel_backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		enable-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mux_backlight_enable>;
+		power-supply = <&reg_vsd>;
+		pwms = <&pwm1 0 50000 0>;
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		/* generic 26650 battery */
+		device-chemistry = "lithium-ion";
+		charge-full-design-microamp-hours = <5000000>;
+		voltage-max-design-microvolt = <4200000>;
+		voltage-min-design-microvolt = <3300000>;
+	};
+
+	tp5000: charger {
+		compatible = "gpio-charger";
+		charger-type = "usb-sdp";
+		gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mux_charger_stat1>;
+	};
+
+	fuel-gauge {
+		compatible = "adc-battery";
+		charged-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		io-channel-names = "voltage";
+		io-channels = <&adc1 7>;
+		monitored-battery = <&battery>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mux_charger_stat2>;
+		power-supplies = <&tp5000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&mux_gpio_keys>;
+		autorepeat;
+
+		up-key {
+			label = "Up";
+			gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_UP>;
+		};
+
+		down-key {
+			label = "Down";
+			gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_DOWN>;
+		};
+
+		left-key {
+			label = "Left";
+			gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_LEFT>;
+		};
+
+		right-key {
+			label = "Right";
+			gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RIGHT>;
+		};
+
+		ok-key {
+			label = "Ok";
+			gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_ENTER>;
+		};
+
+		return-key {
+			label = "Return";
+			gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_ESC>;
+		};
+
+		play-key {
+			label = "Media";
+			gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MEDIA>;
+		};
+
+		trigger-key {
+			label = "Trigger";
+			gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_TRIGGER>;
+		};
+
+		power-key {
+			label = "Power";
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+		};
+
+		light-key {
+			label = "Light";
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_LIGHTS_TOGGLE>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&mux_led_ctrl>;
+
+		led {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_FLASH;
+			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mux_poweroff>;
+	};
+
+	reg_vref: regulator-vref-4v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "VREF_4V2";
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+	};
+
+	reg_vsd: regulator-vsd {
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&adc1 {
+	#io-channel-cells = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mux_adc>;
+	vref-supply = <&reg_vref>;
+	status = "okay";
+};
+
+&csi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mux_csi>;
+	status = "okay";
+
+	port {
+		parallel_from_gc0308: endpoint {
+			remote-endpoint = <&gc0308_to_parallel>;
+		};
+	};
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mux_spi3>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "inanbo,t28cp45tn89-v17";
+		reg = <0>;
+		backlight = <&panel_backlight>;
+		power-supply = <&reg_vsd>;
+		spi-cpha;
+		spi-cpol;
+		spi-max-frequency = <1000000>;
+		spi-rx-bus-width = <0>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+};
+
+&gpio1 {
+	ir-reset-hog {
+		gpio-hog;
+		gpios = <3 GPIO_ACTIVE_LOW>;
+		line-name = "ir-reset-gpio";
+		output-low;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mux_ir_reset>;
+	};
+};
+
+&gpio2 {
+	/* configuring this to output-high results in poweroff */
+	power-en-hog {
+		gpio-hog;
+		gpios = <6 GPIO_ACTIVE_HIGH>;
+		line-name = "power-en-gpio";
+		output-low;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mux_poweroff2>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mux_i2c1>;
+	status = "okay";
+
+	camera@21 {
+		compatible = "galaxycore,gc0308";
+		reg = <0x21>;
+		clocks = <&clks IMX6UL_CLK_CSI>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mux_gc0308>;
+		powerdown-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		vdd28-supply = <&reg_vsd>;
+
+		port {
+			gc0308_to_parallel: endpoint {
+				remote-endpoint = <&parallel_from_gc0308>;
+				bus-width = <8>;
+				data-shift = <2>; /* lines 9:2 are used */
+				hsync-active = <1>; /* active high */
+				vsync-active = <1>; /* active high */
+				data-active = <1>; /* active high */
+				pclk-sample = <1>; /* sample on rising edge */
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mux_i2c2>;
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&lcdif {
+	assigned-clocks = <&clks IMX6UL_CLK_LCDIF_PRE_SEL>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL5_VIDEO_DIV>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mux_lcd_data>, <&mux_lcd_ctrl>;
+	status = "okay";
+
+	port {
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mux_pwm>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mux_uart>;
+	status = "okay";
+};
+
+&usbotg1 {
+	/* USB-C connector */
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbotg2 {
+	/* thermal sensor */
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usbphy2 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usdhc1 {
+	/* MicroSD */
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	keep-power-in-suspend;
+	no-1-8-v;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&mux_sdhc1>, <&mux_sdhc1_cd>;
+	pinctrl-1 = <&mux_sdhc1_100mhz>, <&mux_sdhc1_cd>;
+	pinctrl-2 = <&mux_sdhc1_200mhz>, <&mux_sdhc1_cd>;
+	wakeup-source;
+	vmmc-supply = <&reg_vsd>;
+	status = "okay";
+};
+
+&usdhc2 {
+	/* eMMC */
+	keep-power-in-suspend;
+	no-1-8-v;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mux_sdhc2>;
+	wakeup-source;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mux_wdog>;
+};
+
+&iomuxc {
+	mux_adc: adcgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__GPIO1_IO07		0xb0
+		>;
+	};
+
+	mux_backlight_enable: blenablegrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO09__GPIO1_IO09		0x3008
+		>;
+	};
+
+	mux_charger_stat1: charger1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01		0x3008
+		>;
+	};
+
+	mux_charger_stat2: charger2grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02		0x3008
+		>;
+	};
+
+	mux_csi: csi1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK		0x1b088
+			MX6UL_PAD_CSI_VSYNC__CSI_VSYNC			0x1b088
+			MX6UL_PAD_CSI_HSYNC__CSI_HSYNC			0x1b088
+			MX6UL_PAD_CSI_DATA00__CSI_DATA02		0x1b088
+			MX6UL_PAD_CSI_DATA01__CSI_DATA03		0x1b088
+			MX6UL_PAD_CSI_DATA02__CSI_DATA04		0x1b088
+			MX6UL_PAD_CSI_DATA03__CSI_DATA05		0x1b088
+			MX6UL_PAD_CSI_DATA04__CSI_DATA06		0x1b088
+			MX6UL_PAD_CSI_DATA05__CSI_DATA07		0x1b088
+			MX6UL_PAD_CSI_DATA06__CSI_DATA08		0x1b088
+			MX6UL_PAD_CSI_DATA07__CSI_DATA09		0x1b088
+		>;
+	};
+
+	mux_gc0308: gc0308grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_MCLK__CSI_MCLK			0x1e038
+			MX6UL_PAD_GPIO1_IO05__GPIO1_IO05		0x1b088
+			MX6UL_PAD_GPIO1_IO06__GPIO1_IO06		0x1b088
+		>;
+	};
+
+	mux_gpio_keys: gpiokeygrp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11		0x3008
+			MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12		0x3008
+			MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13		0x3008
+			MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10		0x3008
+			MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09		0x3008
+			MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15		0x3008
+			MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08		0x3008
+			MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14		0x3008
+			MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03		0x3008
+			MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01		0x3008
+		>;
+	};
+
+	mux_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL		0x4001b8b0
+			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA		0x4001b8b0
+		>;
+	};
+
+	mux_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL		0x4001f8a8
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA		0x4001f8a8
+		>;
+	};
+
+	mux_ir_reset: irresetgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03		0x3008
+		>;
+	};
+
+	mux_lcd_ctrl: lcdifctrlgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK			0x79
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE		0x79
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC		0x79
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC		0x79
+		>;
+	};
+
+	mux_lcd_data: lcdifdatgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00		0x79
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01		0x79
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02		0x79
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03		0x79
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04		0x79
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05		0x79
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06		0x79
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07		0x79
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08		0x79
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09		0x79
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10		0x79
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11		0x79
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12		0x79
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13		0x79
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14		0x79
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15		0x79
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16		0x79
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17		0x79
+		>;
+	};
+
+	mux_led_ctrl: ledctrlgrp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02		0x3008
+		>;
+	};
+
+	mux_poweroff: poweroffgrp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04		0x3008
+		>;
+	};
+
+	mux_poweroff2: poweroff2grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_TX_CLK__GPIO2_IO06		0x3008
+		>;
+	};
+
+	mux_pwm: pwm1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO08__PWM1_OUT			0x110b0
+		>;
+	};
+
+	mux_sdhc1: sdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD			0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK			0x10071
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0		0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1		0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2		0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3		0x17059
+		>;
+	};
+
+	mux_sdhc1_100mhz: sdhc1-100mhz-grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD			0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK			0x170b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0		0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1		0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2		0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3		0x170b9
+		>;
+	};
+
+	mux_sdhc1_200mhz: sdhc1-200mhz-grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD			0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK			0x170f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0		0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1		0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2		0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3		0x170f9
+		>;
+	};
+
+	mux_sdhc1_cd: sdhc1-cd-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19		0x17059
+		>;
+	};
+
+	mux_sdhc2: sdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK			0x10069
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD			0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0		0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1		0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2		0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3		0x17059
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4		0x17059
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5		0x17059
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6		0x17059
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7		0x17059
+		>;
+	};
+
+	mux_spi3: ecspi3grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI		0x100b1
+			MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK		0x100b1
+			MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20		0x3008
+		>;
+	};
+
+	mux_uart: uartgrp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX		0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX		0x1b0b1
+		>;
+	};
+
+	mux_wdog: wdoggrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY		0x30b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull.dtsi
index 9bf67490ac49..db0c339022ac 100644
--- a/arch/arm/boot/dts/imx6ull.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull.dtsi
@@ -50,7 +50,7 @@
 };
 
 / {
-	soc {
+	soc: soc {
 		aips3: bus@2200000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
@@ -75,7 +75,7 @@
 				clocks = <&clks IMX6UL_CLK_DUMMY>;
 			};
 
-			iomuxc_snvs: iomuxc-snvs@2290000 {
+			iomuxc_snvs: pinctrl@2290000 {
 				compatible = "fsl,imx6ull-iomuxc-snvs";
 				reg = <0x02290000 0x4000>;
 			};
@@ -88,6 +88,8 @@
 				clocks = <&clks IMX6UL_CLK_UART8_IPG>,
 					 <&clks IMX6UL_CLK_UART8_SERIAL>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma 45 4 0>, <&sdma 46 4 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 		};
diff --git a/arch/arm/boot/dts/imx6ulz-14x14-evk.dts b/arch/arm/boot/dts/nxp/imx/imx6ulz-14x14-evk.dts
index 483d9732c002..483d9732c002 100644
--- a/arch/arm/boot/dts/imx6ulz-14x14-evk.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ulz-14x14-evk.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts b/arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts
new file mode 100644
index 000000000000..2d9f495660c9
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 BSH Hausgeraete GmbH
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "imx6ulz.dtsi"
+
+/ {
+	model = "BSH SMM M2";
+	compatible = "bsh,imx6ulz-bsh-smm-m2", "fsl,imx6ull", "fsl,imx6ulz";
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	usdhc2_pwrseq: usdhc2-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		max-speed = <3000000>;
+		shutdown-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "peripheral";
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usdhc2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wlan>;
+	bus-width = <4>;
+	no-1-8-v;
+	non-removable;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	cap-sdio-irq;
+	mmc-pwrseq = <&usdhc2_pwrseq>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&gpio1>;
+		interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&wdog1 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_CLE__RAWNAND_CLE		0xb0b1
+			MX6UL_PAD_NAND_ALE__RAWNAND_ALE		0xb0b1
+			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B	0xb0b1
+			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B	0xb000
+			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B	0xb0b1
+			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B	0xb0b1
+			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B	0xb0b1
+			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0xb0b1
+			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01	0xb0b1
+			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02	0xb0b1
+			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03	0xb0b1
+			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04	0xb0b1
+			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05	0xb0b1
+			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06	0xb0b1
+			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x1b099
+			MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS	0x1b0b1
+			MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS	0x1b099
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01	0x79		/* BT_REG_ON */
+			MX6UL_PAD_SD1_CLK__GPIO2_IO17		0x100b1		/* BT_DEV_WAKE out */
+			MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13	0x1b0b0		/* BT_HOST_WAKE in */
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_wlan: wlangrp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_HSYNC__USDHC2_CMD		0x17059
+			MX6UL_PAD_CSI_VSYNC__USDHC2_CLK		0x10059
+			MX6UL_PAD_CSI_DATA00__USDHC2_DATA0	0x17059
+			MX6UL_PAD_CSI_DATA01__USDHC2_DATA1	0x17059
+			MX6UL_PAD_CSI_DATA02__USDHC2_DATA2	0x17059
+			MX6UL_PAD_CSI_DATA03__USDHC2_DATA3	0x17059
+			MX6UL_PAD_SD1_DATA3__GPIO2_IO21		0x79		/* WL_REG_ON */
+			MX6UL_PAD_UART2_CTS_B__GPIO1_IO22	0x100b1		/* WL_DEV_WAKE - WiFi_GPIO_4 - WiFi FW UART */
+			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x1b0b1		/* WL_HOST_WAKE - WIFI_GPIO_0 - OOB IRQ */
+			MX6UL_PAD_ENET1_RX_EN__OSC32K_32K_OUT	0x4001b031	/* OSC 32Khz wifi clk in */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ulz.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ulz.dtsi
index 0b5f1a763567..0b5f1a763567 100644
--- a/arch/arm/boot/dts/imx6ulz.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ulz.dtsi
diff --git a/arch/arm/boot/dts/nxp/imx/imx7-colibri-aster.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-colibri-aster.dtsi
new file mode 100644
index 000000000000..01612741f792
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7-colibri-aster.dtsi
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017-2022 Toradex
+ */
+
+/* Colibri AD0 to AD3 */
+&adc1 {
+	status = "okay";
+};
+
+/* Colibri SSP */
+&ecspi3 {
+	cs-gpios = <
+		&gpio4 11 GPIO_ACTIVE_LOW /* SODIMM 86 / regular SSPFRM as UNO_SPI_CS or  */
+		&gpio4 23 GPIO_ACTIVE_LOW /* SODIMM 65 / already muxed pinctrl_gpio2 as SPI_CE0_N */
+		&gpio4 22 GPIO_ACTIVE_LOW /* SODIMM 85 / already muxed pinctrl_gpio2 as SPI_CE1_N */
+	>;
+	status = "okay";
+};
+
+/* Colibri Fast Ethernet */
+&fec1 {
+	status = "okay";
+};
+
+/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */
+&i2c4 {
+	status = "okay";
+};
+
+/* Colibri PWM<A> */
+&pwm1 {
+	status = "okay";
+};
+
+/* Colibri PWM<B> */
+&pwm2 {
+	status = "okay";
+};
+
+/* Colibri PWM<C> */
+&pwm3 {
+	status = "okay";
+};
+
+/* Colibri PWM<D> */
+&pwm4 {
+	status = "okay";
+};
+
+/* M41T0M6 real time clock */
+&rtc {
+	status = "okay";
+};
+
+/* Colibri UART_A */
+&uart1 {
+	status = "okay";
+};
+
+/* Colibri UART_B */
+&uart2 {
+	status = "okay";
+};
+
+/* Colibri UART_C */
+&uart3 {
+	status = "okay";
+};
+
+/* Colibri USBC */
+&usbotg1 {
+	disable-over-current;
+	status = "okay";
+};
+
+/* Colibri MMC/SD */
+&usdhc1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7-colibri-eval-v3.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-colibri-eval-v3.dtsi
new file mode 100644
index 000000000000..326440f2b4f4
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7-colibri-eval-v3.dtsi
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2016-2022 Toradex
+ */
+
+/ {
+	/* Fixed crystal dedicated to MCP2515. */
+	clk16m: clk16m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <16000000>;
+	};
+};
+
+/* Colibri AD0 to AD3 */
+&adc1 {
+	status = "okay";
+};
+
+/*
+ * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3.
+ * So if you enable following capacitive touch controller, disable pwm2/pwm3 first.
+ */
+&atmel_mxt_ts {
+	interrupt-parent = <&gpio1>;
+	interrupts = <9 IRQ_TYPE_EDGE_FALLING>;		/* SODIMM 28 / INT */
+	pinctrl-0 = <&pinctrl_atmel_adapter>;
+	reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;	/* SODIMM 30 / RST */
+	status = "disabled";
+};
+
+/* Colibri SSP */
+&ecspi3 {
+	status = "okay";
+
+	mcp2515: can@0 {
+		clocks = <&clk16m>;
+		compatible = "microchip,mcp2515";
+		interrupt-parent = <&gpio5>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can_int>;
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+		vdd-supply = <&reg_3v3>;
+		xceiver-supply = <&reg_5v0>;
+	};
+};
+
+/* Colibri Fast Ethernet */
+&fec1 {
+	status = "okay";
+};
+
+/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */
+&i2c4 {
+	status = "okay";
+};
+
+/* Colibri PWM<A> */
+&pwm1 {
+	status = "okay";
+};
+
+/* Colibri PWM<B> */
+&pwm2 {
+	/* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+	status = "okay";
+};
+
+/* Colibri PWM<C> */
+&pwm3 {
+	/* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+	status = "okay";
+};
+
+/* Colibri PWM<D> */
+&pwm4 {
+	status = "okay";
+};
+
+/* M41T0M6 real time clock */
+&rtc {
+	status = "okay";
+};
+
+/* Colibri UART_A */
+&uart1 {
+	status = "okay";
+};
+
+/* Colibri UART_B */
+&uart2 {
+	status = "okay";
+};
+
+/* Colibri UART_C */
+&uart3 {
+	status = "okay";
+};
+
+/* Colibri USBC */
+&usbotg1 {
+	disable-over-current;
+	status = "okay";
+};
+
+/* Colibri MMC/SD */
+&usdhc1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7-colibri-iris-v2.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-colibri-iris-v2.dtsi
new file mode 100644
index 000000000000..b687727f956a
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7-colibri-iris-v2.dtsi
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/ {
+	reg_3v3_vmmc: regulator-3v3-vmmc {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* SODIMM 100 */
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3v3_vmmc";
+		startup-delay-us = <100>;
+	};
+};
+
+/* Colibri AD0 to AD3 */
+&adc1 {
+	status = "okay";
+};
+
+/* Colibri SSP */
+&ecspi3 {
+	status = "okay";
+};
+
+/* Colibri Fast Ethernet */
+&fec1 {
+	status = "okay";
+};
+
+&gpio2 {
+	/*
+	 * uart_b_c_on_x14_enable turns the UART transceiver for UART2 and 5 on. If one wants to
+	 * turn the transceiver off, that property has to be deleted and the gpio handled in
+	 * userspace.
+	 * The same applies to uart_a_on_x13_enable where the UART_A transceiver is turned on.
+	 */
+	uart-b-c-on-x14-enable-hog {
+		gpio-hog;
+		gpios = <27 GPIO_ACTIVE_HIGH>; /* SODIMM 104 */
+		output-high;
+	};
+};
+
+&gpio5 {
+	uart-a-on-x13-enable-hog {
+		gpio-hog;
+		gpios = <17 GPIO_ACTIVE_HIGH>; /* SODIMM 102 */
+		output-high;
+	};
+};
+
+/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */
+&i2c4 {
+	status = "okay";
+};
+
+/* Colibri PWM<A> */
+&pwm1 {
+	status = "okay";
+};
+
+/* Colibri PWM<B> */
+&pwm2 {
+	status = "okay";
+};
+
+/* Colibri PWM<C> */
+&pwm3 {
+	status = "okay";
+};
+
+/* Colibri PWM<D> */
+&pwm4 {
+	status = "okay";
+};
+
+/* M41T0M6 real time clock */
+&rtc {
+	status = "okay";
+};
+
+/* Colibri UART_A */
+&uart1 {
+	status = "okay";
+};
+
+/* Colibri UART_B */
+&uart2 {
+	status = "okay";
+};
+
+/* Colibri UART_C */
+&uart3 {
+	status = "okay";
+};
+
+/* Colibri USBC */
+&usbotg1 {
+	disable-over-current;
+	status = "okay";
+};
+
+/* Colibri MMC/SD, UHS-I capable uSD slot */
+&usdhc1 {
+	cap-power-off-card;
+	/delete-property/ keep-power-in-suspend;
+	/delete-property/ no-1-8-v;
+	vmmc-supply = <&reg_3v3_vmmc>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7-colibri-iris.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-colibri-iris.dtsi
new file mode 100644
index 000000000000..6a9e5ab59691
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7-colibri-iris.dtsi
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/* Colibri AD0 to AD3 */
+&adc1 {
+	status = "okay";
+};
+
+/*
+ * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3.
+ * So if you enable following capacitive touch controller, disable pwm2/pwm3 first.
+ */
+&atmel_mxt_ts {
+	interrupt-parent = <&gpio1>;
+	interrupts = <9 IRQ_TYPE_EDGE_FALLING>;		/* SODIMM 28 / INT */
+	pinctrl-0 = <&pinctrl_atmel_adapter>;
+	reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;	/* SODIMM 30 / RST */
+};
+
+/* Colibri SSP */
+&ecspi3 {
+	status = "okay";
+};
+
+/* Colibri Fast Ethernet */
+&fec1 {
+	status = "okay";
+};
+
+&gpio2 {
+	/*
+	 * uart25 turns the UART transceiver for UART2 and 5 on. If one wants to turn the
+	 * transceiver off, that property has to be deleted and the gpio handled in userspace.
+	 * The same applies to uart1_tx_on where the UART1 transceiver is turned on.
+	 */
+	uart25-tx-on-hog {
+		gpio-hog;
+		gpios = <27 GPIO_ACTIVE_HIGH>; /* SODIMM 104 */
+		output-high;
+	};
+};
+
+&gpio5 {
+	uart1-tx-on-hog {
+		gpio-hog;
+		gpios = <17 GPIO_ACTIVE_HIGH>; /* SODIMM 102 */
+		output-high;
+	};
+};
+
+/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */
+&i2c4 {
+	status = "okay";
+};
+
+/* Colibri PWM<A> */
+&pwm1 {
+	status = "okay";
+};
+
+/* Colibri PWM<B> */
+&pwm2 {
+	/* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+	status = "okay";
+};
+
+/* Colibri PWM<C> */
+&pwm3 {
+	/* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+	status = "okay";
+};
+
+/* Colibri PWM<D> */
+&pwm4 {
+	status = "okay";
+};
+
+/* M41T0M6 real time clock */
+&rtc {
+	status = "okay";
+};
+
+/* Colibri UART_A */
+&uart1 {
+	status = "okay";
+};
+
+/* Colibri UART_B */
+&uart2 {
+	status = "okay";
+};
+
+/* Colibri UART_C */
+&uart3 {
+	status = "okay";
+};
+
+/* Colibri USBC */
+&usbotg1 {
+	disable-over-current;
+	status = "okay";
+};
+
+/* Colibri MMC/SD */
+&usdhc1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7-colibri.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-colibri.dtsi
new file mode 100644
index 000000000000..8666dcd7fe97
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7-colibri.dtsi
@@ -0,0 +1,1142 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2016-2022 Toradex
+ */
+
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	aliases {
+		rtc0 = &rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	backlight: backlight {
+		brightness-levels = <0 45 63 88 119 158 203 255>;
+		compatible = "pwm-backlight";
+		default-brightness-level = <4>;
+		enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_bl_on>;
+		power-supply = <&reg_module_3v3>;
+		pwms = <&pwm1 0 6666667 PWM_POLARITY_INVERTED>;
+		status = "disabled";
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	extcon_usbc_det: usbc-det {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>; /* SODIMM 137 / USBC_DET */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbc_det>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiokeys>;
+
+		key-wakeup {
+			debounce-interval = <10>;
+			gpios = <&gpio1 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* SODIMM 45 */
+			label = "Wake-Up";
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+
+	panel_dpi: panel-dpi {
+		backlight = <&backlight>;
+		compatible = "edt,et057090dhu";
+		power-supply = <&reg_3v3>;
+		status = "disabled";
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcdif_out>;
+			};
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3.3V";
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "5V";
+	};
+
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3";
+	};
+
+	reg_module_3v3_avdd: regulator-module-3v3-avdd {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3_AVDD_AUDIO";
+	};
+
+	reg_module_3v3_eth: regulator-module-3v3-eth {
+		compatible = "regulator-fixed";
+		off-on-delay-us = <200000>;
+		regulator-name = "+V3.3_ETH";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		startup-delay-us = <200000>;
+		vin-supply = <&reg_LDO1>;
+	};
+
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		gpio = <&gpio4 7 GPIO_ACTIVE_LOW>; /* SODIMM 129 / USBH_PEN */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh_reg>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "VCC_USB[1-4]";
+		vin-supply = <&reg_5v0>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,name = "colibri-imx7";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
+			sound-dai = <&codec>;
+		};
+	};
+};
+
+/* Colibri AD0 to AD3 */
+&adc1 {
+	vref-supply = <&reg_DCDC3>;
+};
+
+/* ADC2 is not available as it conflicts with AD7879 resistive touchscreen. */
+
+&cpu0 {
+	cpu-supply = <&reg_DCDC2>;
+};
+
+/* Colibri SSP */
+&ecspi3 {
+	cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* SODIMM 86 / SSPFRM */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3_cs>;
+};
+
+/* Colibri Fast Ethernet */
+&fec1 {
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+	clock-names = "ipg", "ahb", "ptp", "enet_clk_ref";
+	clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+		 <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+		 <&clks IMX7D_ENET1_TIME_ROOT_CLK>,
+		 <&clks IMX7D_PLL_ENET_MAIN_50M_CLK>;
+	fsl,magic-packet;
+	phy-handle = <&ethphy0>;
+	phy-mode = "rmii";
+	phy-supply = <&reg_module_3v3_eth>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_enet1>;
+	pinctrl-1 = <&pinctrl_enet1_sleep>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Micrel KSZ8041RNL */
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			max-speed = <100>;
+			micrel,led-mode = <0>;
+			reg = <0>;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+};
+
+&gpio1 {
+	gpio-line-names = "SODIMM_43",
+			  "SODIMM_45",
+			  "SODIMM_135",
+			  "SODIMM_22",
+			  "",
+			  "",
+			  "SODIMM_37",
+			  "SODIMM_29",
+			  "SODIMM_59",
+			  "SODIMM_28",
+			  "SODIMM_30",
+			  "SODIMM_67",
+			  "",
+			  "",
+			  "SODIMM_188",
+			  "SODIMM_178";
+};
+
+&gpio2 {
+	gpio-line-names = "SODIMM_111",
+			  "SODIMM_113",
+			  "SODIMM_115",
+			  "SODIMM_117",
+			  "SODIMM_119",
+			  "SODIMM_121",
+			  "SODIMM_123",
+			  "SODIMM_125",
+			  "SODIMM_91",
+			  "SODIMM_89",
+			  "SODIMM_105",
+			  "SODIMM_152",
+			  "SODIMM_150",
+			  "SODIMM_95",
+			  "SODIMM_126",
+			  "SODIMM_107",
+			  "SODIMM_114",
+			  "SODIMM_116",
+			  "SODIMM_118",
+			  "SODIMM_120",
+			  "SODIMM_122",
+			  "SODIMM_124",
+			  "SODIMM_127",
+			  "SODIMM_130",
+			  "SODIMM_132",
+			  "SODIMM_134",
+			  "SODIMM_133",
+			  "SODIMM_104",
+			  "SODIMM_106",
+			  "SODIMM_110",
+			  "SODIMM_112",
+			  "SODIMM_128";
+};
+
+&gpio3 {
+	gpio-line-names = "SODIMM_56",
+			  "SODIMM_44",
+			  "SODIMM_68",
+			  "SODIMM_82",
+			  "SODIMM_93",
+			  "SODIMM_76",
+			  "SODIMM_70",
+			  "SODIMM_60",
+			  "SODIMM_58",
+			  "SODIMM_78",
+			  "SODIMM_72",
+			  "SODIMM_80",
+			  "SODIMM_46",
+			  "SODIMM_62",
+			  "SODIMM_48",
+			  "SODIMM_74",
+			  "SODIMM_50",
+			  "SODIMM_52",
+			  "SODIMM_54",
+			  "SODIMM_66",
+			  "SODIMM_64",
+			  "SODIMM_57",
+			  "SODIMM_61",
+			  "SODIMM_136",
+			  "SODIMM_138",
+			  "SODIMM_140",
+			  "SODIMM_142",
+			  "SODIMM_144",
+			  "SODIMM_146";
+};
+
+&gpio4 {
+	gpio-line-names = "SODIMM_35",
+			  "SODIMM_33",
+			  "SODIMM_38",
+			  "SODIMM_36",
+			  "SODIMM_21",
+			  "SODIMM_19",
+			  "SODIMM_131",
+			  "SODIMM_129",
+			  "SODIMM_90",
+			  "SODIMM_92",
+			  "SODIMM_88",
+			  "SODIMM_86",
+			  "SODIMM_81",
+			  "SODIMM_94",
+			  "SODIMM_96",
+			  "SODIMM_75",
+			  "SODIMM_101",
+			  "SODIMM_103",
+			  "SODIMM_79",
+			  "SODIMM_97",
+			  "SODIMM_67",
+			  "SODIMM_59",
+			  "SODIMM_85",
+			  "SODIMM_65";
+};
+
+&gpio5 {
+	gpio-line-names = "SODIMM_69",
+			  "SODIMM_71",
+			  "SODIMM_73",
+			  "SODIMM_47",
+			  "SODIMM_190",
+			  "SODIMM_192",
+			  "SODIMM_49",
+			  "SODIMM_51",
+			  "SODIMM_53",
+			  "",
+			  "",
+			  "SODIMM_98",
+			  "SODIMM_184",
+			  "SODIMM_186",
+			  "SODIMM_23",
+			  "SODIMM_31",
+			  "SODIMM_100",
+			  "SODIMM_102";
+};
+
+&gpio6 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_169",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_77",
+			  "SODIMM_24",
+			  "",
+			  "SODIMM_25",
+			  "SODIMM_27",
+			  "SODIMM_32",
+			  "SODIMM_34";
+};
+
+&gpio7 {
+	gpio-line-names = "",
+			  "",
+			  "SODIMM_63",
+			  "SODIMM_55",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_196",
+			  "SODIMM_194",
+			  "",
+			  "SODIMM_99",
+			  "",
+			  "",
+			  "SODIMM_137";
+};
+
+/* NAND on such SKUs */
+&gpmi {
+	fsl,use-minimum-ecc;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+};
+
+/* On-module Power I2C */
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1 &pinctrl_i2c1_int>;
+	pinctrl-1 = <&pinctrl_i2c1_recovery &pinctrl_i2c1_int>;
+	scl-gpios = <&gpio1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		#sound-dai-cells = <0>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
+		compatible = "fsl,sgtl5000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sai1_mclk>;
+		reg = <0xa>;
+		VDDA-supply = <&reg_module_3v3_avdd>;
+		VDDD-supply = <&reg_DCDC3>;
+		VDDIO-supply = <&reg_module_3v3>;
+	};
+
+	ad7879_ts: touchscreen@2c {
+		adi,acquisition-time = /bits/ 8 <1>;
+		adi,averaging = /bits/ 8 <1>;
+		adi,conversion-interval = /bits/ 8 <255>;
+		adi,first-conversion-delay = /bits/ 8 <3>;
+		adi,median-filter-size = /bits/ 8 <2>;
+		adi,resistance-plate-x = <120>;
+		compatible = "adi,ad7879-1";
+		interrupt-parent = <&gpio1>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+		reg = <0x2c>;
+		touchscreen-max-pressure = <4096>;
+		status = "disabled";
+	};
+
+	pmic@33 {
+		compatible = "ricoh,rn5t567";
+		reg = <0x33>;
+
+		regulators {
+			reg_DCDC1: DCDC1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1100000>;
+				regulator-min-microvolt = <1000000>;
+				regulator-name = "+V1.0_SOC";
+			};
+
+			reg_DCDC2: DCDC2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1100000>;
+				regulator-min-microvolt = <975000>;
+				regulator-name = "+V1.1_ARM";
+			};
+
+			reg_DCDC3: DCDC3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "+V1.8";
+			};
+
+			reg_DCDC4: DCDC4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1350000>;
+				regulator-min-microvolt = <1350000>;
+				regulator-name = "+V1.35_DRAM";
+			};
+
+			reg_LDO1: LDO1 {
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "PWR_EN_+V3.3_ETH";
+			};
+
+			reg_LDO2: LDO2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "+V1.8_SD";
+			};
+
+			reg_LDO3: LDO3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "PWR_EN_+V3.3_LPSR";
+			};
+
+			reg_LDO4: LDO4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "+V1.8_LPSR";
+			};
+
+			reg_LDO5: LDO5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "PWR_EN_+V3.3";
+			};
+		};
+	};
+};
+
+/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_recovery>;
+	scl-gpios = <&gpio7 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio7 9 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "disabled";
+
+	/* Atmel maxtouch controller */
+	atmel_mxt_ts: touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		interrupt-parent = <&gpio2>;
+		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;        /* SODIMM 107 / INT */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_atmel_connector>;
+		reg = <0x4a>;
+		reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;      /* SODIMM 106 / RST */
+		status = "disabled";
+	};
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+		status = "disabled";
+	};
+};
+
+&lcdif {
+	assigned-clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_VIDEO_POST_DIV>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif_dat
+		     &pinctrl_lcdif_ctrl>;
+	status = "disabled";
+
+	port {
+		lcdif_out: endpoint {
+			remote-endpoint = <&lcd_panel_in>;
+		};
+	};
+};
+
+/* Colibri PWM<A> */
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+};
+
+/* Colibri PWM<B> */
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+};
+
+/* Colibri PWM<C> */
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+};
+
+/* Colibri PWM<D> */
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+};
+
+&reg_1p0d {
+	vin-supply = <&reg_DCDC3>; /* VDDA_1P8_IN */
+};
+
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	status = "okay";
+};
+
+/* Colibri UART_A */
+&uart1 {
+	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	fsl,dte-mode;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_ctrl1 &pinctrl_uart1_ctrl2>;
+	uart-has-rtscts;
+};
+
+/* Colibri UART_B */
+&uart2 {
+	assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	fsl,dte-mode;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+};
+
+/* Colibri UART_C */
+&uart3 {
+	assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	fsl,dte-mode;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+};
+
+/* Colibri USBC */
+&usbotg1 {
+	dr_mode = "otg";
+	extcon = <0>, <&extcon_usbc_det>;
+};
+
+/* Colibri MMC/SD */
+&usdhc1 {
+	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	no-1-8-v;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_cd_usdhc1>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_cd_usdhc1>;
+	pinctrl-3 = <&pinctrl_usdhc1_sleep &pinctrl_cd_usdhc1_sleep>;
+	vmmc-supply = <&reg_3v3>;
+	vqmmc-supply = <&reg_LDO2>;
+	wakeup-source;
+};
+
+/* eMMC on 1GB (eMMC) SKUs */
+&usdhc3 {
+	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	fsl,tuning-step = <2>;
+	non-removable;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	sdhci-caps-mask = <0x80000000 0x0>;
+	vmmc-supply = <&reg_module_3v3>;
+	vqmmc-supply = <&reg_DCDC3>;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 &pinctrl_gpio4>;
+
+	/*
+	 * Atmel MXT touchsceen + Capacitive Touch Adapter
+	 * NOTE: This pin group conflicts with pin groups pinctrl_pwm2/pinctrl_pwm3.
+	 * Don't use them simultaneously.
+	 */
+	pinctrl_atmel_adapter: atmeladaptergrp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO09__GPIO1_IO9		0x74 /* SODIMM 28 / INT */
+			MX7D_PAD_GPIO1_IO10__GPIO1_IO10		0x14 /* SODIMM 30 / RST */
+		>;
+	};
+
+	/* Atmel MXT touchsceen + boards with built-in Capacitive Touch Connector */
+	pinctrl_atmel_connector: atmelconnectorgrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_BDR0__GPIO2_IO28		0x14 /* SODIMM 106 / RST */
+			MX7D_PAD_EPDC_DATA15__GPIO2_IO15	0x74 /* SODIMM 107 / INT */
+		>;
+	};
+
+	pinctrl_can_int: canintgrp {
+		fsl,pins = <
+			MX7D_PAD_SD1_RESET_B__GPIO5_IO2		0X14 /* SODIMM 73 */
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX7D_PAD_I2C1_SCL__ECSPI3_MISO		0x2 /* SODIMM 90 */
+			MX7D_PAD_I2C1_SDA__ECSPI3_MOSI		0x2 /* SODIMM 92 */
+			MX7D_PAD_I2C2_SCL__ECSPI3_SCLK		0x2 /* SODIMM 88 */
+		>;
+	};
+
+	pinctrl_ecspi3_cs: ecspi3csgrp {
+		fsl,pins = <
+			MX7D_PAD_I2C2_SDA__GPIO4_IO11		0x14 /* SODIMM 86 */
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x73
+			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x73
+			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RX_ER		0x73
+			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x73
+			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x73
+			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x73
+			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x73
+			MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1		0x73
+			MX7D_PAD_SD2_CD_B__ENET1_MDIO			0x3
+			MX7D_PAD_SD2_WP__ENET1_MDC			0x3
+		>;
+	};
+
+	pinctrl_enet1_sleep: enet1-sleepgrp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_RD0__GPIO7_IO0		0x0
+			MX7D_PAD_ENET1_RGMII_RD1__GPIO7_IO1		0x0
+			MX7D_PAD_ENET1_RGMII_RXC__GPIO7_IO5		0x0
+			MX7D_PAD_ENET1_RGMII_RX_CTL__GPIO7_IO4		0x0
+			MX7D_PAD_ENET1_RGMII_TD0__GPIO7_IO6		0x0
+			MX7D_PAD_ENET1_RGMII_TD1__GPIO7_IO7		0x0
+			MX7D_PAD_ENET1_RGMII_TX_CTL__GPIO7_IO10		0x0
+			MX7D_PAD_GPIO1_IO12__GPIO1_IO12			0x0
+			MX7D_PAD_SD2_CD_B__GPIO5_IO9			0x0
+			MX7D_PAD_SD2_WP__GPIO5_IO10			0x0
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_RD2__FLEXCAN1_RX	0x79 /* SODIMM 63 */
+			MX7D_PAD_ENET1_RGMII_RD3__FLEXCAN1_TX	0x79 /* SODIMM 55 */
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX	0x79 /* SODIMM 188 */
+			MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX	0x79 /* SODIMM 178 */
+		>;
+	};
+
+	pinctrl_gpio1: gpio1grp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_BDR1__GPIO2_IO29		0x14 /* SODIMM 110 */
+			MX7D_PAD_EPDC_DATA00__GPIO2_IO0		0x14 /* SODIMM 111 */
+			MX7D_PAD_EPDC_DATA01__GPIO2_IO1		0x14 /* SODIMM 113 */
+			MX7D_PAD_EPDC_DATA02__GPIO2_IO2		0x14 /* SODIMM 115 */
+			MX7D_PAD_EPDC_DATA03__GPIO2_IO3		0x14 /* SODIMM 117 */
+			MX7D_PAD_EPDC_DATA04__GPIO2_IO4		0x14 /* SODIMM 119 */
+			MX7D_PAD_EPDC_DATA05__GPIO2_IO5		0x14 /* SODIMM 121 */
+			MX7D_PAD_EPDC_DATA06__GPIO2_IO6		0x14 /* SODIMM 123 */
+			MX7D_PAD_EPDC_DATA07__GPIO2_IO7		0x14 /* SODIMM 125 */
+			MX7D_PAD_EPDC_DATA08__GPIO2_IO8		0x74 /* SODIMM 91 */
+			MX7D_PAD_EPDC_DATA09__GPIO2_IO9		0x14 /* SODIMM 89 */
+			MX7D_PAD_EPDC_DATA10__GPIO2_IO10	0x74 /* SODIMM 105 */
+			MX7D_PAD_EPDC_DATA11__GPIO2_IO11	0x14 /* SODIMM 152 */
+			MX7D_PAD_EPDC_DATA12__GPIO2_IO12	0x14 /* SODIMM 150 */
+			MX7D_PAD_EPDC_DATA14__GPIO2_IO14	0x14 /* SODIMM 126 */
+			MX7D_PAD_EPDC_GDCLK__GPIO2_IO24		0x14 /* SODIMM 132 */
+			MX7D_PAD_EPDC_GDOE__GPIO2_IO25		0x14 /* SODIMM 134 */
+			MX7D_PAD_EPDC_GDRL__GPIO2_IO26		0x14 /* SODIMM 133 */
+			MX7D_PAD_EPDC_GDSP__GPIO2_IO27		0x14 /* SODIMM 104 */
+			MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30	0x14 /* SODIMM 112 */
+			MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31	0x14 /* SODIMM 128 */
+			MX7D_PAD_EPDC_SDCE0__GPIO2_IO20		0x14 /* SODIMM 122 */
+			MX7D_PAD_EPDC_SDCE1__GPIO2_IO21		0x14 /* SODIMM 124 */
+			MX7D_PAD_EPDC_SDCE2__GPIO2_IO22		0x14 /* SODIMM 127 */
+			MX7D_PAD_EPDC_SDCE3__GPIO2_IO23		0x14 /* SODIMM 130 */
+			MX7D_PAD_EPDC_SDCLK__GPIO2_IO16		0x14 /* SODIMM 114 */
+			MX7D_PAD_EPDC_SDLE__GPIO2_IO17		0x14 /* SODIMM 116 */
+			MX7D_PAD_EPDC_SDOE__GPIO2_IO18		0x14 /* SODIMM 118 */
+			MX7D_PAD_EPDC_SDSHR__GPIO2_IO19		0x14 /* SODIMM 120 */
+			MX7D_PAD_LCD_RESET__GPIO3_IO4		0x14 /* SODIMM 93 */
+			MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17	0x14 /* SODIMM 24 */
+			MX7D_PAD_SAI1_RX_DATA__GPIO6_IO12	0x14 /* SODIMM 169 */
+			MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16	0x14 /* SODIMM 77 */
+			MX7D_PAD_SD2_CLK__GPIO5_IO12		0x14 /* SODIMM 184 */
+			MX7D_PAD_SD2_CMD__GPIO5_IO13		0x14 /* SODIMM 186 */
+			MX7D_PAD_SD2_DATA2__GPIO5_IO16		0x14 /* SODIMM 100 */
+			MX7D_PAD_SD2_DATA3__GPIO5_IO17		0x14 /* SODIMM 102 */
+			MX7D_PAD_UART3_RTS_B__GPIO4_IO6		0x14 /* SODIMM 131 */
+		>;
+	};
+
+	pinctrl_gpio2: gpio2grp { /* On X22 Camera interface */
+		fsl,pins = <
+			MX7D_PAD_ECSPI1_MISO__GPIO4_IO18	0x14 /* SODIMM 79 */
+			MX7D_PAD_ECSPI1_MOSI__GPIO4_IO17	0x14 /* SODIMM 103 */
+			MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16	0x14 /* SODIMM 101 */
+			MX7D_PAD_ECSPI1_SS0__GPIO4_IO19		0x14 /* SODIMM 97 */
+			MX7D_PAD_ECSPI2_MISO__GPIO4_IO22	0x14 /* SODIMM 85 */
+			MX7D_PAD_ECSPI2_SS0__GPIO4_IO23		0x14 /* SODIMM 65 */
+			MX7D_PAD_I2C3_SCL__GPIO4_IO12		0x14 /* SODIMM 81 */
+			MX7D_PAD_I2C3_SDA__GPIO4_IO13		0x14 /* SODIMM 94 */
+			MX7D_PAD_I2C4_SCL__GPIO4_IO14		0x14 /* SODIMM 96 */
+			MX7D_PAD_I2C4_SDA__GPIO4_IO15		0x14 /* SODIMM 75 */
+			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x74 /* SODIMM 69 */
+			MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x14 /* SODIMM 98 */
+		>;
+	};
+
+	pinctrl_gpio3: gpio3grp { /* LCD 18-23 */
+		fsl,pins = <
+			MX7D_PAD_LCD_DATA18__GPIO3_IO23		0x14 /* SODIMM 136 */
+			MX7D_PAD_LCD_DATA19__GPIO3_IO24		0x14 /* SODIMM 138 */
+			MX7D_PAD_LCD_DATA20__GPIO3_IO25		0x14 /* SODIMM 140 */
+			MX7D_PAD_LCD_DATA21__GPIO3_IO26		0x14 /* SODIMM 142 */
+			MX7D_PAD_LCD_DATA22__GPIO3_IO27		0x74 /* SODIMM 144 */
+			MX7D_PAD_LCD_DATA23__GPIO3_IO28		0x74 /* SODIMM 146 */
+		>;
+	};
+
+	pinctrl_gpio4: gpio4grp { /* Alternatively CAN2 */
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO14__GPIO1_IO14		0x14 /* SODIMM 188 */
+			MX7D_PAD_GPIO1_IO15__GPIO1_IO15		0x14 /* SODIMM 178 */
+		>;
+	};
+
+	pinctrl_gpio7: gpio7grp { /* Alternatively CAN1 */
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2	0x14 /* SODIMM 63 */
+			MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3	0x14 /* SODIMM 55 */
+		>;
+	};
+
+	pinctrl_gpio_bl_on: gpioblongrp {
+		fsl,pins = <
+			MX7D_PAD_SD1_WP__GPIO5_IO1		0x14 /* SODIMM 71 */
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_TX_BCLK__NAND_CE0_B	0x71
+			MX7D_PAD_SAI1_TX_DATA__NAND_READY_B	0x74
+			MX7D_PAD_SD3_CLK__NAND_CLE		0x71
+			MX7D_PAD_SD3_CMD__NAND_ALE		0x71
+			MX7D_PAD_SD3_DATA0__NAND_DATA00		0x71
+			MX7D_PAD_SD3_DATA1__NAND_DATA01		0x71
+			MX7D_PAD_SD3_DATA2__NAND_DATA02		0x71
+			MX7D_PAD_SD3_DATA3__NAND_DATA03		0x71
+			MX7D_PAD_SD3_DATA4__NAND_DATA04		0x71
+			MX7D_PAD_SD3_DATA5__NAND_DATA05		0x71
+			MX7D_PAD_SD3_DATA6__NAND_DATA06		0x71
+			MX7D_PAD_SD3_DATA7__NAND_DATA07		0x71
+			MX7D_PAD_SD3_RESET_B__NAND_WE_B		0x71
+			MX7D_PAD_SD3_STROBE__NAND_RE_B		0x71
+		>;
+	};
+
+	pinctrl_i2c1_int: i2c1intgrp { /* PMIC / TOUCH */
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO13__GPIO1_IO13	0x79
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_TD2__I2C4_SCL	0x4000007f /* SODIMM 196 */
+			MX7D_PAD_ENET1_RGMII_TD3__I2C4_SDA	0x4000007f /* SODIMM 194 */
+		>;
+	};
+
+	pinctrl_i2c4_recovery: i2c4-recoverygrp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_TD2__GPIO7_IO8	0x4000007f
+			MX7D_PAD_ENET1_RGMII_TD3__GPIO7_IO9	0x4000007f
+		>;
+	};
+
+	pinctrl_lcdif_dat: lcdifdatgrp {
+		fsl,pins = <
+			MX7D_PAD_LCD_DATA00__LCD_DATA0		0x79 /* SODIMM 76 */
+			MX7D_PAD_LCD_DATA01__LCD_DATA1		0x79 /* SODIMM 70 */
+			MX7D_PAD_LCD_DATA02__LCD_DATA2		0x79 /* SODIMM 60 */
+			MX7D_PAD_LCD_DATA03__LCD_DATA3		0x79 /* SODIMM 58 */
+			MX7D_PAD_LCD_DATA04__LCD_DATA4		0x79 /* SODIMM 78 */
+			MX7D_PAD_LCD_DATA05__LCD_DATA5		0x79 /* SODIMM 72 */
+			MX7D_PAD_LCD_DATA06__LCD_DATA6		0x79 /* SODIMM 80 */
+			MX7D_PAD_LCD_DATA07__LCD_DATA7		0x79 /* SODIMM 46 */
+			MX7D_PAD_LCD_DATA08__LCD_DATA8		0x79 /* SODIMM 62 */
+			MX7D_PAD_LCD_DATA09__LCD_DATA9		0x79 /* SODIMM 48 */
+			MX7D_PAD_LCD_DATA10__LCD_DATA10		0x79 /* SODIMM 74 */
+			MX7D_PAD_LCD_DATA11__LCD_DATA11		0x79 /* SODIMM 50 */
+			MX7D_PAD_LCD_DATA12__LCD_DATA12		0x79 /* SODIMM 52 */
+			MX7D_PAD_LCD_DATA13__LCD_DATA13		0x79 /* SODIMM 54 */
+			MX7D_PAD_LCD_DATA14__LCD_DATA14		0x79 /* SODIMM 66 */
+			MX7D_PAD_LCD_DATA15__LCD_DATA15		0x79 /* SODIMM 64 */
+			MX7D_PAD_LCD_DATA16__LCD_DATA16		0x79 /* SODIMM 57 */
+			MX7D_PAD_LCD_DATA17__LCD_DATA17		0x79 /* SODIMM 61 */
+		>;
+	};
+
+	pinctrl_lcdif_dat_24: lcdifdat24grp {
+		fsl,pins = <
+			MX7D_PAD_LCD_DATA18__LCD_DATA18		0x79 /* SODIMM 136 */
+			MX7D_PAD_LCD_DATA19__LCD_DATA19		0x79 /* SODIMM 138 */
+			MX7D_PAD_LCD_DATA20__LCD_DATA20		0x79 /* SODIMM 140 */
+			MX7D_PAD_LCD_DATA21__LCD_DATA21		0x79 /* SODIMM 142 */
+			MX7D_PAD_LCD_DATA22__LCD_DATA22		0x79 /* SODIMM 144 */
+			MX7D_PAD_LCD_DATA23__LCD_DATA23		0x79 /* SODIMM 146 */
+		>;
+	};
+
+	pinctrl_lcdif_ctrl: lcdifctrlgrp {
+		fsl,pins = <
+			MX7D_PAD_LCD_CLK__LCD_CLK		0x79 /* SODIMM 56 */
+			MX7D_PAD_LCD_ENABLE__LCD_ENABLE		0x79 /* SODIMM 44 */
+			MX7D_PAD_LCD_HSYNC__LCD_HSYNC		0x79 /* SODIMM 68 */
+			MX7D_PAD_LCD_VSYNC__LCD_VSYNC		0x79 /* SODIMM 82 */
+		>;
+	};
+
+	pinctrl_lvds_transceiver: lvdstxgrp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2     0x14 /* SODIMM 63 */
+			MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3     0x74 /* SODIMM 55 */
+			MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11    0x14 /* SODIMM 99 */
+			MX7D_PAD_EPDC_DATA13__GPIO2_IO13        0x14 /* SODIMM 95 */
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21	0x4  /* SODIMM 59 */
+			MX7D_PAD_GPIO1_IO08__PWM1_OUT		0x79 /* SODIMM 59 */
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO09__PWM2_OUT		0x79 /* SODIMM 28 */
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO10__PWM3_OUT		0x79 /* SODIMM 30 */
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20	0x4  /* SODIMM 67 */
+			MX7D_PAD_GPIO1_IO11__PWM4_OUT		0x79 /* SODIMM 67 */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX7D_PAD_SAI2_TX_BCLK__UART1_DTE_CTS	0x79 /* SODIMM 25 */
+			MX7D_PAD_SAI2_TX_SYNC__UART1_DTE_RTS	0x79 /* SODIMM 27 */
+			MX7D_PAD_UART1_RX_DATA__UART1_DTE_TX	0x79 /* SODIMM 35 */
+			MX7D_PAD_UART1_TX_DATA__UART1_DTE_RX	0x79 /* SODIMM 33 */
+		>;
+	};
+
+	pinctrl_uart1_ctrl1: uart1ctrl1grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_DATA0__GPIO5_IO14		0x14 /* SODIMM 23 / DTR */
+			MX7D_PAD_SD2_DATA1__GPIO5_IO15		0x14 /* SODIMM 31 / DCD */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX7D_PAD_SAI2_RX_DATA__UART2_DTE_RTS	0x79 /* SODIMM 32 / CTS */
+			MX7D_PAD_SAI2_TX_DATA__UART2_DTE_CTS	0x79 /* SODIMM 34 / RTS */
+			MX7D_PAD_UART2_RX_DATA__UART2_DTE_TX	0x79 /* SODIMM 38 */
+			MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX	0x79 /* SODIMM 36 */
+		>;
+	};
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX7D_PAD_UART3_RX_DATA__UART3_DTE_TX	0x79 /* SODIMM 21 */
+			MX7D_PAD_UART3_TX_DATA__UART3_DTE_RX	0x79 /* SODIMM 19 */
+		>;
+	};
+
+	pinctrl_usbc_det: usbcdetgrp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_CRS__GPIO7_IO14		0x14 /* SODIMM 137 / USBC_DET */
+		>;
+	};
+
+	pinctrl_usbh_reg: usbhreggrp {
+		fsl,pins = <
+			MX7D_PAD_UART3_CTS_B__GPIO4_IO7		0x14 /* SODIMM 129 / USBH_PEN */
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x19 /* SODIMM 47 */
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x59 /* SODIMM 190 */
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59 /* SODIMM 192 */
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59 /* SODIMM 49 */
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59 /* SODIMM 51 */
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59 /* SODIMM 53 */
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x1a
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x5a
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5a
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5a
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5a
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5a
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x1b
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x5b
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5b
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5b
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5b
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5b
+		>;
+	};
+
+	/* Avoid backfeeding with removed card power. */
+	pinctrl_usdhc1_sleep: usdhc1-slpgrp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x10
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x10
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x10
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x10
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x10
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x10
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
+			MX7D_PAD_SD3_STROBE__SD3_STROBE         0x19
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5a
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5a
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5a
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5a
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5a
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5a
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5a
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5a
+			MX7D_PAD_SD3_STROBE__SD3_STROBE         0x1a
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1b
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5b
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5b
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5b
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5b
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5b
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5b
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5b
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5b
+			MX7D_PAD_SD3_STROBE__SD3_STROBE         0x1b
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_COL__SAI1_TX_DATA0	0x30
+			MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK     0x1f
+			MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0	0x1f
+			MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC	0x1f
+		>;
+	};
+
+	pinctrl_sai1_mclk: sai1mclkgrp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_MCLK__SAI1_MCLK           0x1f
+		>;
+	};
+};
+
+&iomuxc_lpsr {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_lpsr>;
+
+	pinctrl_cd_usdhc1: cdusdhc1grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0	0x59 /* SODIMM 43 / MMC_CD */
+		>;
+	};
+
+	pinctrl_cd_usdhc1_sleep: cdusdhc1-slpgrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0	0x0
+		>;
+	};
+
+	pinctrl_gpio_lpsr: gpiolpsrgrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2	0x59 /* SODIMM 135 */
+			MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3	0x59 /* SODIMM 22 */
+		>;
+	};
+
+	pinctrl_gpiokeys: gpiokeysgrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1	0x19 /* SODIMM 45 / WAKE_UP */
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO04__I2C1_SCL	0x4000007f
+			MX7D_PAD_LPSR_GPIO1_IO05__I2C1_SDA	0x4000007f
+		>;
+	};
+
+	pinctrl_i2c1_recovery: i2c1-recoverygrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4	0x4000007f
+			MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x4000007f
+		>;
+	};
+
+	pinctrl_uart1_ctrl2: uart1ctrl2grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6	0x14 /* SODIMM 37 / RI */
+			MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7	0x14 /* SODIMM 29 / DSR */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi
new file mode 100644
index 000000000000..4d948a9757f9
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi
@@ -0,0 +1,656 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Device Tree Include file for TQ-Systems MBa7 carrier board.
+ *
+ * Copyright (C) 2016 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
+ *
+ * Note: This file does not include nodes for all peripheral devices.
+ * As device driver coverage increases additional nodes can be added.
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	aliases {
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc1;
+		/delete-property/ mmc2;
+		rtc0 = &ds1339;
+		rtc1 = &snvs_rtc;
+	};
+
+	beeper {
+		compatible = "gpio-beeper";
+		gpios = <&pca9555 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	chosen {
+		stdout-path = &uart6;
+	};
+
+	gpio_buttons: gpio-keys {
+		compatible = "gpio-keys";
+
+		/*
+		 * NOTE: These buttons are attached to a GPIO-expander.
+		 * Enabling wakeup-source, enables wakeup on all inputs.
+		 * If PE_GPIO[3..6] are used as inputs, they cause a
+		 * wakeup as well.
+		 */
+		button-0 {
+			/* #SWITCH_A */
+			label = "S11";
+			linux,code = <KEY_1>;
+			gpios = <&pca9555 13 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button-1 {
+			/* #SWITCH_B */
+			label = "S12";
+			linux,code = <KEY_2>;
+			gpios = <&pca9555 14 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button-2 {
+			/* #SWITCH_C */
+			label = "S13";
+			linux,code = <KEY_3>;
+			gpios = <&pca9555 15 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			label = "led1";
+			gpios = <&pca9555 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led2 {
+			label = "led2";
+			gpios = <&pca9555 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+			      <&adc2 0>, <&adc2 1>, <&adc2 2>, <&adc2 3>;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VBUS_USBOTG1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VBUS_USBOTG2";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_mpcie_1v5: regulator-mpcie-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC1V5_MPCIE";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&pca9555 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&reg_mba_5v>;
+	};
+
+	reg_mpcie_3v3: regulator-mpcie-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3_MPCIE";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pca9555 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&reg_mba_3v3>;
+	};
+
+	reg_mba_12v0: regulator-mba-12v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC12V0_MBA7";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&pca9555 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_mba_5v: regulator-mba-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_mba_3v3: regulator-mba-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_vref_1v8: regulator-vref-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC1V8_REF";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&sw2_reg>;
+	};
+
+	reg_audio_3v3: regulator-audio-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3_AUDIO";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_mba_3v3>;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-tlv320aic32x4";
+		model = "tqm-tlv320aic32";
+		ssi-controller = <&sai1>;
+		audio-codec = <&tlv320aic32x4>;
+		audio-routing =
+			"IN3_L", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"IN1_L", "Line In Jack",
+			"IN1_R", "Line In Jack",
+			"Line Out Jack", "LOL",
+			"Line Out Jack", "LOR";
+	};
+};
+
+&adc1 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&adc2 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>, <&pinctrl_ecspi1_ss0>;
+	cs-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>, <&gpio4 1 GPIO_ACTIVE_LOW>,
+		   <&gpio4 2 GPIO_ACTIVE_LOW>, <&gpio4 19 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy1_0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1_0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_enet1_phy>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			reset-gpios = <&gpio7 15 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <1000>;
+			reset-deassert-us = <500>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		};
+	};
+};
+
+&flash0 {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		uboot@0 {
+			label = "U-Boot";
+			reg = <0x0 0xd0000>;
+		};
+
+		env1@d0000 {
+			label = "ENV1";
+			reg = <0xd0000 0x10000>;
+		};
+
+		env2@e0000 {
+			label = "ENV2";
+			reg = <0xe0000 0x10000>;
+		};
+
+		dtb@f0000 {
+			label = "DTB";
+			reg = <0xf0000 0x10000>;
+		};
+
+		linux@100000 {
+			label = "Linux";
+			reg = <0x100000 0x700000>;
+		};
+
+		rootfs@800000 {
+			label = "RootFS";
+			reg = <0x800000 0x3800000>;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&i2c1 {
+	lm75: temperature-sensor@49 {
+		compatible = "national,lm75a";
+		reg = <0x49>;
+		vs-supply = <&reg_mba_3v3>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_recovery>;
+	scl-gpios = <&gpio4 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio4 11 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	tlv320aic32x4: audio-codec@18 {
+		compatible = "ti,tlv320aic32x4";
+		reg = <0x18>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
+		clock-names = "mclk";
+		ldoin-supply = <&reg_audio_3v3>;
+		iov-supply = <&reg_audio_3v3>;
+	};
+
+	pca9555: gpio-expander@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pca9555>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		vcc-supply = <&reg_mba_3v3>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_recovery>;
+	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog_mba7_1>;
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins =
+			<MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO		0x7c>,
+			<MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI		0x74>,
+			<MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK		0x74>,
+			<MX7D_PAD_UART1_RX_DATA__GPIO4_IO0		0x74>,
+			<MX7D_PAD_UART1_TX_DATA__GPIO4_IO1		0x74>,
+			<MX7D_PAD_UART2_RX_DATA__GPIO4_IO2		0x74>;
+	};
+
+	pinctrl_ecspi1_ss0: ecspi1ss0grp {
+		fsl,pins = <
+			MX7D_PAD_ECSPI1_SS0__GPIO4_IO19			0x74
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins =
+			<MX7D_PAD_ECSPI2_MISO__ECSPI2_MISO		0x7c>,
+			<MX7D_PAD_ECSPI2_MOSI__ECSPI2_MOSI		0x74>,
+			<MX7D_PAD_ECSPI2_SCLK__ECSPI2_SCLK		0x74>,
+			<MX7D_PAD_ECSPI2_SS0__ECSPI2_SS0		0x74>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins =
+			<MX7D_PAD_GPIO1_IO10__ENET1_MDIO			0x02>,
+			<MX7D_PAD_GPIO1_IO11__ENET1_MDC				0x00>,
+			<MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC		0x71>,
+			<MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0		0x71>,
+			<MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1		0x71>,
+			<MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2		0x71>,
+			<MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3		0x71>,
+			<MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x71>,
+			<MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC		0x79>,
+			<MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0		0x79>,
+			<MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1		0x79>,
+			<MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2		0x79>,
+			<MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3		0x79>,
+			<MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x79>;
+	};
+
+	pinctrl_enet1_phy: enet1phygrp {
+		fsl,pins =
+			/* Reset: SION, 100kPU, SRE_FAST, DSE_X1 */
+			<MX7D_PAD_ENET1_COL__GPIO7_IO15				0x40000070>,
+			/* INT/PWDN: SION, 100kPU, HYS, SRE_FAST, DSE_X1 */
+			<MX7D_PAD_GPIO1_IO09__GPIO1_IO9				0x40000078>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins =
+			<MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX	0x5a>,
+			<MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX	0x52>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins =
+			<MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX	0x5a>,
+			<MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX	0x52>;
+	};
+
+	pinctrl_hog_mba7_1: hogmba71grp {
+		fsl,pins =
+			/* Limitation: WDOG2_B / WDOG2_RESET not usable */
+			<MX7D_PAD_ENET1_RX_CLK__GPIO7_IO13	0x4000007c>,
+			<MX7D_PAD_ENET1_CRS__GPIO7_IO14		0x40000074>,
+			/* #BOOT_EN */
+			<MX7D_PAD_UART2_TX_DATA__GPIO4_IO3	0x40000010>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins =
+			<MX7D_PAD_I2C2_SCL__I2C2_SCL		0x40000078>,
+			<MX7D_PAD_I2C2_SDA__I2C2_SDA		0x40000078>;
+	};
+
+	pinctrl_i2c2_recovery: i2c2recoverygrp {
+		fsl,pins =
+			<MX7D_PAD_I2C2_SCL__GPIO4_IO10		0x40000078>,
+			<MX7D_PAD_I2C2_SDA__GPIO4_IO11		0x40000078>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins =
+			<MX7D_PAD_I2C3_SCL__I2C3_SCL		0x40000078>,
+			<MX7D_PAD_I2C3_SDA__I2C3_SDA		0x40000078>;
+	};
+
+	pinctrl_i2c3_recovery: i2c3recoverygrp {
+		fsl,pins =
+			<MX7D_PAD_I2C3_SCL__GPIO4_IO12		0x40000078>,
+			<MX7D_PAD_I2C3_SDA__GPIO4_IO13		0x40000078>;
+	};
+
+	pinctrl_pca9555: pca95550grp {
+		fsl,pins =
+			<MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12	0x78>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins =
+			<MX7D_PAD_SAI1_MCLK__SAI1_MCLK		0x11>,
+			<MX7D_PAD_SAI1_RX_BCLK__SAI1_RX_BCLK	0x1c>,
+			<MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0	0x1c>,
+			<MX7D_PAD_SAI1_RX_SYNC__SAI2_RX_SYNC	0x1c>,
+
+			<MX7D_PAD_SAI1_TX_BCLK__SAI1_TX_BCLK	0x1c>,
+			<MX7D_PAD_SAI1_TX_DATA__SAI1_TX_DATA0	0x14>,
+			<MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC	0x14>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins =
+			<MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX	0x7e>,
+			<MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX	0x76>,
+			<MX7D_PAD_UART3_CTS_B__UART3_DCE_CTS	0x76>,
+			<MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS	0x7e>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins =
+			<MX7D_PAD_SAI2_TX_SYNC__UART4_DCE_RX	0x7e>,
+			<MX7D_PAD_SAI2_TX_BCLK__UART4_DCE_TX	0x76>,
+			<MX7D_PAD_SAI2_RX_DATA__UART4_DCE_CTS	0x76>,
+			<MX7D_PAD_SAI2_TX_DATA__UART4_DCE_RTS	0x7e>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins =
+			<MX7D_PAD_I2C4_SCL__UART5_DCE_RX	0x7e>,
+			<MX7D_PAD_I2C4_SDA__UART5_DCE_TX	0x76>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins =
+			<MX7D_PAD_EPDC_DATA08__UART6_DCE_RX	0x7d>,
+			<MX7D_PAD_EPDC_DATA09__UART6_DCE_TX	0x75>,
+			<MX7D_PAD_EPDC_DATA11__UART6_DCE_CTS	0x75>,
+			<MX7D_PAD_EPDC_DATA10__UART6_DCE_RTS	0x7d>;
+	};
+
+	pinctrl_uart7: uart7grp {
+		fsl,pins =
+			<MX7D_PAD_EPDC_DATA12__UART7_DCE_RX	0x7e>,
+			<MX7D_PAD_EPDC_DATA13__UART7_DCE_TX	0x76>,
+			<MX7D_PAD_EPDC_DATA15__UART7_DCE_CTS	0x76>,
+			/* Limitation: RTS is not connected */
+			<MX7D_PAD_EPDC_DATA14__UART7_DCE_RTS	0x7e>;
+	};
+
+	pinctrl_usdhc1_gpio: usdhc1_gpiogrp {
+		fsl,pins =
+			/* WP */
+			<MX7D_PAD_SD1_WP__GPIO5_IO1		0x7c>,
+			/* CD */
+			<MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x7c>,
+			/* VSELECT */
+			<MX7D_PAD_GPIO1_IO08__SD1_VSELECT	0x59>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins =
+			<MX7D_PAD_SD1_CMD__SD1_CMD		0x5e>,
+			<MX7D_PAD_SD1_CLK__SD1_CLK		0x57>,
+			<MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5e>,
+			<MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5e>,
+			<MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5e>,
+			<MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5e>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1_100mhzgrp {
+		fsl,pins =
+			<MX7D_PAD_SD1_CMD__SD1_CMD		0x5a>,
+			<MX7D_PAD_SD1_CLK__SD1_CLK		0x57>,
+			<MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5a>,
+			<MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5a>,
+			<MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5a>,
+			<MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5a>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1_200mhzgrp {
+		fsl,pins =
+			<MX7D_PAD_SD1_CMD__SD1_CMD		0x5b>,
+			<MX7D_PAD_SD1_CLK__SD1_CLK		0x57>,
+			<MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5b>,
+			<MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5b>,
+			<MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5b>,
+			<MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5b>;
+	};
+};
+
+&iomuxc_lpsr {
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins =
+			/* LCD_CONTRAST */
+			<MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT	0x50>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins =
+			<MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC	0x5c>,
+			<MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x59>;
+	};
+
+	pinctrl_wdog1: wdog1grp {
+		fsl,pins =
+			<MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B	0x30>;
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>,
+			  <&clks IMX7D_SAI1_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+	assigned-clock-rates = <0>, <36864000>;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	assigned-clocks = <&clks IMX7D_UART4_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	assigned-clocks = <&clks IMX7D_UART5_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart7>;
+	assigned-clocks = <&clks IMX7D_UART7_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	uart-has-rtscts;
+	linux,rs485-enabled-at-boot-time;
+	rs485-rts-active-low;
+	rs485-rx-during-tx;
+	status = "okay";
+};
+
+&usbh {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	over-current-active-low;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>;
+	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_mba_3v3>;
+	bus-width = <4>;
+	no-1-8-v;
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog1>;
+	fsl,ext-reset-output;
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
new file mode 100644
index 000000000000..2966a33bc528
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
@@ -0,0 +1,305 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Device Tree Include file for TQ-Systems TQMa7x boards with full mounted PCB.
+ *
+ * Copyright (C) 2016 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
+ */
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		/* 512 MB - default configuration */
+		reg = <0x80000000 0x20000000>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&sw1a_reg>;
+};
+
+&gpio2 {
+	/* Configured as pullup by QSPI pin group */
+	qspi-reset-hog {
+		gpio-hog;
+		gpios = <4 GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "qspi-reset";
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_recovery>;
+	scl-gpios = <&gpio4 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio4 9 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	pfuze3000: pmic@8 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic1>;
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			/* use sw1c_reg to align with pfuze100/pfuze200 */
+			sw1c_reg: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	/* LM75A temperature sensor, TQMa7x 01xx */
+	lm75a: temperature-sensor@48 {
+		compatible = "national,lm75a";
+		reg = <0x48>;
+		vs-supply = <&vgen4_reg>;
+	};
+
+	/* NXP SE97BTP with temperature sensor + eeprom, TQMa7x 02xx */
+	se97b: temperature-sensor@1e {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1e>;
+	};
+
+	/* ST M24C64 */
+	m24c64: eeprom@50 {
+		compatible = "atmel,24c64";
+		read-only;
+		reg = <0x50>;
+		pagesize = <32>;
+		vcc-supply = <&vgen4_reg>;
+	};
+
+	at24c02: eeprom@56 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x56>;
+		pagesize = <16>;
+		vcc-supply = <&vgen4_reg>;
+	};
+
+	ds1339: rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins =
+			<MX7D_PAD_I2C1_SDA__I2C1_SDA	0x40000078>,
+			<MX7D_PAD_I2C1_SCL__I2C1_SCL	0x40000078>;
+	};
+
+	pinctrl_i2c1_recovery: i2c1recoverygrp {
+		fsl,pins =
+			<MX7D_PAD_I2C1_SDA__GPIO4_IO9	0x40000078>,
+			<MX7D_PAD_I2C1_SCL__GPIO4_IO8	0x40000078>;
+	};
+
+	pinctrl_pmic1: pmic1grp {
+		fsl,pins =
+			<MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x4000005C>;
+	};
+
+	pinctrl_qspi: qspigrp {
+		fsl,pins =
+			<MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0	0x5A>,
+			<MX7D_PAD_EPDC_DATA01__QSPI_A_DATA1	0x5A>,
+			<MX7D_PAD_EPDC_DATA02__QSPI_A_DATA2	0x5A>,
+			<MX7D_PAD_EPDC_DATA03__QSPI_A_DATA3	0x5A>,
+			<MX7D_PAD_EPDC_DATA05__QSPI_A_SCLK	0x11>,
+			<MX7D_PAD_EPDC_DATA06__QSPI_A_SS0_B	0x54>,
+			<MX7D_PAD_EPDC_DATA07__QSPI_A_SS1_B	0x54>;
+	};
+
+	pinctrl_qspi_reset: qspi_resetgrp {
+		fsl,pins =
+			/* #QSPI_RESET */
+			<MX7D_PAD_EPDC_DATA04__GPIO2_IO4	0x52>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins =
+			<MX7D_PAD_SD3_CMD__SD3_CMD		0x59>,
+			<MX7D_PAD_SD3_CLK__SD3_CLK		0x56>,
+			<MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59>,
+			<MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59>,
+			<MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59>,
+			<MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59>,
+			<MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59>,
+			<MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59>,
+			<MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59>,
+			<MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59>,
+			<MX7D_PAD_SD3_STROBE__SD3_STROBE	0x19>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3_100mhzgrp {
+		fsl,pins =
+			<MX7D_PAD_SD3_CMD__SD3_CMD               0x5a>,
+			<MX7D_PAD_SD3_CLK__SD3_CLK               0x51>,
+			<MX7D_PAD_SD3_DATA0__SD3_DATA0           0x5a>,
+			<MX7D_PAD_SD3_DATA1__SD3_DATA1           0x5a>,
+			<MX7D_PAD_SD3_DATA2__SD3_DATA2           0x5a>,
+			<MX7D_PAD_SD3_DATA3__SD3_DATA3           0x5a>,
+			<MX7D_PAD_SD3_DATA4__SD3_DATA4           0x5a>,
+			<MX7D_PAD_SD3_DATA5__SD3_DATA5           0x5a>,
+			<MX7D_PAD_SD3_DATA6__SD3_DATA6           0x5a>,
+			<MX7D_PAD_SD3_DATA7__SD3_DATA7           0x5a>,
+			<MX7D_PAD_SD3_STROBE__SD3_STROBE         0x1a>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3_200mhzgrp {
+		fsl,pins =
+			<MX7D_PAD_SD3_CMD__SD3_CMD               0x5b>,
+			<MX7D_PAD_SD3_CLK__SD3_CLK               0x51>,
+			<MX7D_PAD_SD3_DATA0__SD3_DATA0           0x5b>,
+			<MX7D_PAD_SD3_DATA1__SD3_DATA1           0x5b>,
+			<MX7D_PAD_SD3_DATA2__SD3_DATA2           0x5b>,
+			<MX7D_PAD_SD3_DATA3__SD3_DATA3           0x5b>,
+			<MX7D_PAD_SD3_DATA4__SD3_DATA4           0x5b>,
+			<MX7D_PAD_SD3_DATA5__SD3_DATA5           0x5b>,
+			<MX7D_PAD_SD3_DATA6__SD3_DATA6           0x5b>,
+			<MX7D_PAD_SD3_DATA7__SD3_DATA7           0x5b>,
+			<MX7D_PAD_SD3_STROBE__SD3_STROBE         0x1b>;
+	};
+};
+
+&iomuxc_lpsr {
+	pinctrl_wdog1: wdog1grp {
+		fsl,pins =
+			<MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B	0x30>;
+	};
+};
+
+&qspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi &pinctrl_qspi_reset>;
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <29000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		vcc-supply = <&vgen4_reg>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	vmmc-supply = <&vgen4_reg>;
+	vqmmc-supply = <&sw2_reg>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog1>;
+	/*
+	 * Errata e10574:
+	 * WDOG reset needs to run with WDOG_RESET_B signal enabled.
+	 * X1-51 (WDOG1#) signal needs carrier board handling to reset
+	 * TQMa7 on X1-22 (RESET_IN#).
+	 */
+	fsl,ext-reset-output;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/nxp/imx/imx7d-cl-som-imx7.dts
index 713483c39c9d..713483c39c9d 100644
--- a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-cl-som-imx7.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-colibri-aster.dts b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-aster.dts
new file mode 100644
index 000000000000..00ab92e56da4
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-aster.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017-2022 Toradex
+ */
+
+/dts-v1/;
+#include "imx7d-colibri.dtsi"
+#include "imx7-colibri-aster.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7D on Aster Carrier Board";
+	compatible = "toradex,colibri-imx7d-aster",
+		     "toradex,colibri-imx7d",
+		     "fsl,imx7d";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+&atmel_mxt_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+/* Colibri USBH */
+&usbotg2 {
+	disable-over-current;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc-aster.dts b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc-aster.dts
new file mode 100644
index 000000000000..212e0685585d
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc-aster.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017-2022 Toradex
+ *
+ */
+
+/dts-v1/;
+#include "imx7d-colibri-emmc.dtsi"
+#include "imx7-colibri-aster.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7D 1GB (eMMC) on Aster Carrier Board";
+	compatible = "toradex,colibri-imx7d-emmc-aster",
+		     "toradex,colibri-imx7d-emmc",
+		     "fsl,imx7d";
+};
+
+/* Colibri USBH */
+&usbotg2 {
+	disable-over-current;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc-eval-v3.dts b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc-eval-v3.dts
new file mode 100644
index 000000000000..1deece7e7129
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc-eval-v3.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017-2022 Toradex
+ */
+
+/dts-v1/;
+#include "imx7d-colibri-emmc.dtsi"
+#include "imx7-colibri-eval-v3.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7D 1GB (eMMC) on Colibri Evaluation Board V3";
+	compatible = "toradex,colibri-imx7d-emmc-eval-v3",
+		     "toradex,colibri-imx7d-emmc",
+		     "fsl,imx7d";
+};
+
+/* Colibri USBH */
+&usbotg2 {
+	disable-over-current;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc-iris-v2.dts b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc-iris-v2.dts
new file mode 100644
index 000000000000..22e7863c2e80
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc-iris-v2.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+#include "imx7d-colibri-emmc.dtsi"
+#include "imx7-colibri-iris-v2.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7D 1GB on Iris V2 Carrier Board";
+	compatible = "toradex,colibri-imx7d-emmc-iris-v2",
+		     "toradex,colibri-imx7d-emmc",
+		     "fsl,imx7d";
+};
+
+/* Colibri USBH */
+&usbotg2 {
+	disable-over-current;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc-iris.dts b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc-iris.dts
new file mode 100644
index 000000000000..a3cf8f50e3dc
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc-iris.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+#include "imx7d-colibri-emmc.dtsi"
+#include "imx7-colibri-iris.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7D 1GB on Iris Carrier Board";
+	compatible = "toradex,colibri-imx7d-emmc-iris",
+		     "toradex,colibri-imx7d-emmc",
+		     "fsl,imx7d";
+};
+
+/* Colibri USBH */
+&usbotg2 {
+	disable-over-current;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc.dtsi b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc.dtsi
new file mode 100644
index 000000000000..9670f45eab3b
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc.dtsi
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017-2022 Toradex
+ */
+
+#include "imx7d.dtsi"
+#include "imx7-colibri.dtsi"
+
+/ {
+	aliases {
+		/* Required to properly pass MAC addresses from bootloader. */
+		ethernet0 = &fec1;
+		ethernet1 = &fec2;
+		mmc0 = &usdhc3; /* eMMC */
+		mmc1 = &usdhc1; /* MMC/SD slot */
+		/delete-property/ mmc2;
+		/delete-property/ mmc3;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&cpu1 {
+	cpu-supply = <&reg_DCDC2>;
+};
+
+&gpio6 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_169",
+			  "SODIMM_157",
+			  "",
+			  "SODIMM_163",
+			  "SODIMM_77",
+			  "SODIMM_24",
+			  "",
+			  "SODIMM_25",
+			  "SODIMM_27",
+			  "SODIMM_32",
+			  "SODIMM_34";
+};
+
+/* Colibri USBH */
+&usbotg2 {
+	disable-over-current;
+	dr_mode = "host";
+	vbus-supply = <&reg_usbh_vbus>;
+};
+
+/* eMMC */
+&usdhc3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-colibri-eval-v3.dts b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-eval-v3.dts
new file mode 100644
index 000000000000..33d787617db0
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-eval-v3.dts
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2016-2022 Toradex
+ */
+
+/dts-v1/;
+#include "imx7d-colibri.dtsi"
+#include "imx7-colibri-eval-v3.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7D on Colibri Evaluation Board V3";
+	compatible = "toradex,colibri-imx7d-eval-v3",
+		     "toradex,colibri-imx7d",
+		     "fsl,imx7d";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+/*
+ * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3.
+ * So if you enable following capacitive touch controller, disable pwm2/pwm3 first.
+ */
+&atmel_mxt_ts {
+	status = "disabled";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+/* Colibri PWM<B> */
+&pwm2 {
+	/* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+	status = "okay";
+};
+
+/* Colibri PWM<C> */
+&pwm3 {
+	/* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+	status = "okay";
+};
+
+/* Colibri USBH */
+&usbotg2 {
+	disable-over-current;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-colibri-iris-v2.dts b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-iris-v2.dts
new file mode 100644
index 000000000000..afdb1d06c7f6
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-iris-v2.dts
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+#include "imx7d-colibri.dtsi"
+#include "imx7-colibri-iris-v2.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7D on Iris V2 Carrier Board";
+	compatible = "toradex,colibri-imx7d-iris-v2",
+		     "toradex,colibri-imx7d",
+		     "fsl,imx7d";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+&atmel_mxt_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&gpio2 {
+	/*
+	 * This switches the LVDS transceiver to VESA color mapping mode.
+	 */
+	lvds-color-map-hog {
+		gpio-hog;
+		gpios = <13 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */
+		line-name = "LVDS_COLOR_MAP";
+		output-low;
+	};
+};
+
+&gpio7 {
+	/*
+	 * This switches the LVDS transceiver to the 24-bit RGB mode.
+	 */
+	lvds-rgb-mode-hog {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */
+		line-name = "LVDS_RGB_MODE";
+		output-low;
+	};
+
+	/*
+	 * This switches the LVDS transceiver to the single-channel
+	 * output mode.
+	 */
+	lvds-ch-mode-hog {
+		gpio-hog;
+		gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */
+		line-name = "LVDS_CH_MODE";
+		output-high;
+	};
+
+	/* This turns the LVDS transceiver on */
+	lvds-power-on-hog {
+		gpio-hog;
+		gpios = <11 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */
+		line-name = "LVDS_POWER_ON";
+		output-high;
+	};
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+/* Colibri USBH */
+&usbotg2 {
+	disable-over-current;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-colibri-iris.dts b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-iris.dts
new file mode 100644
index 000000000000..531b0b99bd5a
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-iris.dts
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+#include "imx7d-colibri.dtsi"
+#include "imx7-colibri-iris.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7D on Iris Carrier Board";
+	compatible = "toradex,colibri-imx7d-iris",
+		     "toradex,colibri-imx7d",
+		     "fsl,imx7d";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+/*
+ * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3.
+ * So if you enable following capacitive touch controller, disable pwm2/pwm3 first.
+ */
+&atmel_mxt_ts {
+	status = "disabled";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+/* Colibri PWM<B> */
+&pwm2 {
+	/* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+	status = "okay";
+};
+
+/* Colibri PWM<C> */
+&pwm3 {
+	/* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+	status = "okay";
+};
+
+/* Colibri USBH */
+&usbotg2 {
+	disable-over-current;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-colibri.dtsi b/arch/arm/boot/dts/nxp/imx/imx7d-colibri.dtsi
new file mode 100644
index 000000000000..531a45b176a1
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-colibri.dtsi
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2016-2022 Toradex
+ */
+
+#include "imx7d.dtsi"
+#include "imx7-colibri.dtsi"
+
+/ {
+	aliases {
+		/* Required to properly pass MAC addresses from bootloader. */
+		ethernet0 = &fec1;
+		ethernet1 = &fec2;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+};
+
+&cpu1 {
+	cpu-supply = <&reg_DCDC2>;
+};
+
+/* NAND */
+&gpmi {
+	status = "okay";
+};
+
+/* Colibri USBH */
+&usbotg2 {
+	dr_mode = "host";
+	vbus-supply = <&reg_usbh_vbus>;
+};
diff --git a/arch/arm/boot/dts/imx7d-flex-concentrator-mfg.dts b/arch/arm/boot/dts/nxp/imx/imx7d-flex-concentrator-mfg.dts
index a6d68165fb1e..a6d68165fb1e 100644
--- a/arch/arm/boot/dts/imx7d-flex-concentrator-mfg.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-flex-concentrator-mfg.dts
diff --git a/arch/arm/boot/dts/imx7d-flex-concentrator.dts b/arch/arm/boot/dts/nxp/imx/imx7d-flex-concentrator.dts
index bd6b5285aa8d..9984b343cdf0 100644
--- a/arch/arm/boot/dts/imx7d-flex-concentrator.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-flex-concentrator.dts
@@ -107,7 +107,6 @@
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi2>;
-	num-chipselects = <1>;
 	cs-gpios = <&gpio4 23 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
@@ -122,7 +121,6 @@
 &ecspi4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi4>;
-	num-chipselects = <1>;
 	cs-gpios = <&gpio3 3 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
@@ -132,7 +130,7 @@
 	 * TCG specification - Section 6.4.1 Clocking:
 	 * TPM shall support a SPI clock frequency range of 10-24 MHz.
 	 */
-	st33htph: tpm-tis@0 {
+	st33htph: tpm@0 {
 		compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi";
 		reg = <0>;
 		spi-max-frequency = <24000000>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-mba7.dts b/arch/arm/boot/dts/nxp/imx/imx7d-mba7.dts
new file mode 100644
index 000000000000..e3ee16f1aaa9
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-mba7.dts
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Device Tree Source for TQ-Systems TQMa7D board on MBa7 carrier board.
+ *
+ * Copyright (C) 2016 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "imx7d-tqma7.dtsi"
+#include "imx7-mba7.dtsi"
+
+/ {
+	model = "TQ-Systems TQMa7D board on MBa7 carrier board";
+	compatible = "tq,imx7d-mba7", "tq,imx7d-tqma7", "fsl,imx7d";
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy2_0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy2_0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_enet2_phy>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <1000>;
+			reset-deassert-us = <500>;
+			interrupt-parent = <&gpio2>;
+			interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+		};
+	};
+};
+
+&gpio2 {
+	pcie-dis-hog {
+		gpio-hog;
+		gpios = <29 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "pcie-dis";
+	};
+
+	pcie-rst-hog {
+		gpio-hog;
+		gpios = <12 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "pcie-rst";
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog_mba7_1>, <&pinctrl_hog_pcie>;
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins =
+			<MX7D_PAD_SD2_CD_B__ENET2_MDIO			0x02>,
+			<MX7D_PAD_SD2_WP__ENET2_MDC			0x00>,
+			<MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC		0x71>,
+			<MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0		0x71>,
+			<MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1		0x71>,
+			<MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2		0x71>,
+			<MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3		0x71>,
+			<MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL		0x71>,
+			<MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC		0x79>,
+			<MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0		0x79>,
+			<MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1		0x79>,
+			<MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2		0x79>,
+			<MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3		0x79>,
+			<MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL	0x79>;
+	};
+
+	pinctrl_enet2_phy: enet2phygrp {
+		fsl,pins =
+			/* Reset: SION, 100kPU, SRE_FAST, DSE_X1 */
+			<MX7D_PAD_EPDC_BDR0__GPIO2_IO28		0x40000070>,
+			/* INT/PWDN: SION, 100kPU, HYS, SRE_FAST, DSE_X1 */
+			<MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31	0x40000078>;
+	};
+
+	pinctrl_hog_pcie: hogpciegrp {
+		fsl,pins =
+			/* #pcie_rst */
+			<MX7D_PAD_SD2_CLK__GPIO5_IO12			0x70>,
+			/* #pcie_dis */
+			<MX7D_PAD_EPDC_BDR1__GPIO2_IO29			0x70>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins =
+			/* #pcie_wake */
+			<MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30		0x70>;
+	};
+};
+
+&iomuxc_lpsr {
+	pinctrl_usbotg2: usbotg2grp {
+		fsl,pins =
+			<MX7D_PAD_LPSR_GPIO1_IO06__USB_OTG2_OC	0x5c>,
+			<MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7	0x59>;
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	/* 1.5V logically from 3.3V */
+	/* probe deferral not supported */
+	/* pcie-bus-supply = <&reg_mpcie_1v5>; */
+	reset-gpio = <&gpio5 12 GPIO_ACTIVE_LOW>;
+	status = "disabled";
+};
+
+&usbotg2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg2>;
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7d-meerkat96.dts b/arch/arm/boot/dts/nxp/imx/imx7d-meerkat96.dts
index dd8003bd1fc0..f0fda15f3020 100644
--- a/arch/arm/boot/dts/imx7d-meerkat96.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-meerkat96.dts
@@ -212,7 +212,7 @@
 	keep-power-in-suspend;
 	wakeup-source;
 	vmmc-supply = <&reg_wlreg_on>;
-	vqmmc-supply =<&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
 	status = "okay";
 
 	brcmf: wifi@1 {
diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/nxp/imx/imx7d-nitrogen7.dts
index e0751e6ba3c0..2192f105ec81 100644
--- a/arch/arm/boot/dts/imx7d-nitrogen7.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-nitrogen7.dts
@@ -35,6 +35,7 @@
 	panel-lcd {
 		compatible = "okaya,rs800480t-7x0gp";
 		backlight = <&backlight_lcd>;
+		power-supply = <&reg_3v3>;
 
 		port {
 			panel_in: endpoint {
@@ -61,6 +62,13 @@
 		enable-active-high;
 	};
 
+	reg_3v3: regulator-3v3 {
+		  compatible = "regulator-fixed";
+		  regulator-name = "reg-3v3";
+		  regulator-min-microvolt = <3300000>;
+		  regulator-max-microvolt = <3300000>;
+	 };
+
 	reg_can2_3v3: regulator-can2-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "can2-3v3";
@@ -159,7 +167,7 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pmic: pfuze3000@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze3000";
 		reg = <0x08>;
 
@@ -270,7 +278,7 @@
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
 
-	touch@48 {
+	touchscreen@48 {
 		compatible = "ti,tsc2004";
 		reg = <0x48>;
 		pinctrl-names = "default";
@@ -288,7 +296,7 @@
 	codec: wm8960@1a {
 		compatible = "wlf,wm8960";
 		reg = <0x1a>;
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		clock-names = "mclk";
 		wlf,shared-lrclk;
 	};
@@ -419,7 +427,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog_1 &pinctrl_j2>;
 
-	pinctrl_hog_1: hoggrp-1 {
+	pinctrl_hog_1: hoggrp {
 		fsl,pins = <
 			MX7D_PAD_SD3_RESET_B__GPIO6_IO11	0x5d
 			MX7D_PAD_GPIO1_IO13__GPIO1_IO13		0x7d
@@ -665,7 +673,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog_2>;
 
-	pinctrl_hog_2: hoggrp-2 {
+	pinctrl_hog_2: hoggrp {
 		fsl,pins = <
 			MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2	0x7d
 			MX7D_PAD_LPSR_GPIO1_IO03__CCM_CLKO2	0x7d
diff --git a/arch/arm/boot/dts/imx7d-pico-dwarf.dts b/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts
index 5162fe227d1e..347dd0fe4f82 100644
--- a/arch/arm/boot/dts/imx7d-pico-dwarf.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts
@@ -32,7 +32,7 @@
 };
 
 &i2c1 {
-	clock_frequency = <100000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
@@ -40,6 +40,7 @@
 	sgtl5000: audio-codec@a {
 		reg = <0x0a>;
 		compatible = "fsl,sgtl5000";
+		#sound-dai-cells = <0>;
 		clocks = <&sys_mclk>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_3p3v>;
@@ -48,11 +49,13 @@
 	pressure-sensor@60 {
 		compatible = "fsl,mpl3115";
 		reg = <0x60>;
+		vdd-supply = <&reg_3p3v>;
+		vddio-supply = <&reg_3p3v>;
 	};
 };
 
 &i2c4 {
-	clock_frequency = <100000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
@@ -62,6 +65,7 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 		#interrupt-cells = <2>;
+		interrupt-controller;
 		reg = <0x25>;
 	};
 
diff --git a/arch/arm/boot/dts/imx7d-pico-hobbit.dts b/arch/arm/boot/dts/nxp/imx/imx7d-pico-hobbit.dts
index 7b2198a9372c..6ad39dca7009 100644
--- a/arch/arm/boot/dts/imx7d-pico-hobbit.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-pico-hobbit.dts
@@ -31,7 +31,7 @@
 
 		dailink_master: simple-audio-card,codec {
 			sound-dai = <&sgtl5000>;
-			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		};
 	};
 };
@@ -41,7 +41,7 @@
 		#sound-dai-cells = <0>;
 		reg = <0x0a>;
 		compatible = "fsl,sgtl5000";
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_vref_1v8>;
 	};
@@ -64,7 +64,7 @@
 		interrupt-parent = <&gpio2>;
 		interrupts = <7 0>;
 		spi-max-frequency = <1000000>;
-		pendown-gpio = <&gpio2 7 0>;
+		pendown-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>;
 		vcc-supply = <&reg_3p3v>;
 		ti,x-min = /bits/ 16 <0>;
 		ti,x-max = /bits/ 16 <4095>;
diff --git a/arch/arm/boot/dts/imx7d-pico-nymph.dts b/arch/arm/boot/dts/nxp/imx/imx7d-pico-nymph.dts
index 104a85254adb..af26284297a2 100644
--- a/arch/arm/boot/dts/imx7d-pico-nymph.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-pico-nymph.dts
@@ -43,7 +43,7 @@
 };
 
 &i2c1 {
-	clock_frequency = <100000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
@@ -51,6 +51,7 @@
 	sgtl5000: audio-codec@a {
 		reg = <0x0a>;
 		compatible = "fsl,sgtl5000";
+		#sound-dai-cells = <0>;
 		clocks = <&sys_mclk>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_3p3v>;
@@ -64,7 +65,7 @@
 };
 
 &i2c2 {
-	clock_frequency = <100000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx7d-pico-pi.dts b/arch/arm/boot/dts/nxp/imx/imx7d-pico-pi.dts
index 70bea95c06d8..62221131336f 100644
--- a/arch/arm/boot/dts/imx7d-pico-pi.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-pico-pi.dts
@@ -31,7 +31,7 @@
 
 		dailink_master: simple-audio-card,codec {
 			sound-dai = <&sgtl5000>;
-			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		};
 	};
 };
@@ -41,7 +41,7 @@
 		#sound-dai-cells = <0>;
 		reg = <0x0a>;
 		compatible = "fsl,sgtl5000";
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_vref_1v8>;
 	};
@@ -61,6 +61,10 @@
 	};
 };
 
+&usdhc1 {
+	status = "disabled";
+};
+
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
diff --git a/arch/arm/boot/dts/imx7d-pico.dtsi b/arch/arm/boot/dts/nxp/imx/imx7d-pico.dtsi
index e519897fae08..a1574ccec89c 100644
--- a/arch/arm/boot/dts/imx7d-pico.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-pico.dtsi
@@ -41,7 +41,7 @@
 		regulator-max-microvolt = <3300000>;
 		gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
-        };
+	};
 
 	reg_wlreg_on: regulator-wlreg_on {
 		compatible = "regulator-fixed";
@@ -108,6 +108,14 @@
 	assigned-clock-rates = <0>, <32768>;
 };
 
+&cpu0 {
+	cpu-supply = <&sw1a_reg>;
+};
+
+&cpu1 {
+	cpu-supply = <&sw1a_reg>;
+};
+
 &ecspi3 {
 	cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
@@ -170,7 +178,7 @@
 	pinctrl-0 = <&pinctrl_i2c4>;
 	status = "okay";
 
-	pmic: pfuze3000@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze3000";
 		reg = <0x08>;
 
@@ -432,18 +440,18 @@
 			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x1
 			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x1
 			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x1
-			MX7D_PAD_SD3_RESET_B__GPIO6_IO11                0x1  /* Ethernet reset */
+			MX7D_PAD_SD3_RESET_B__GPIO6_IO11		0x1  /* Ethernet reset */
 		>;
 	};
 
-	pinctrl_can1: can1frp {
+	pinctrl_can1: can1frpgrp {
 		fsl,pins = <
 			MX7D_PAD_SAI1_RX_DATA__FLEXCAN1_RX	0x59
 			MX7D_PAD_SAI1_TX_BCLK__FLEXCAN1_TX	0x59
 		>;
 	};
 
-	pinctrl_can2: can2frp {
+	pinctrl_can2: can2frpgrp {
 		fsl,pins = <
 			MX7D_PAD_SAI1_TX_SYNC__FLEXCAN2_RX	0x59
 			MX7D_PAD_SAI1_TX_DATA__FLEXCAN2_TX	0x59
@@ -491,25 +499,25 @@
 		>;
 	};
 
-	pinctrl_pwm1: pwm1 {
+	pinctrl_pwm1: pwm1grp {
 		fsl,pins = <
-			MX7D_PAD_GPIO1_IO08__PWM1_OUT   0x7f
+			MX7D_PAD_GPIO1_IO08__PWM1_OUT	0x7f
 		>;
 	};
 
-	pinctrl_pwm2: pwm2 {
+	pinctrl_pwm2: pwm2grp {
 		fsl,pins = <
-			MX7D_PAD_GPIO1_IO09__PWM2_OUT   0x7f
+			MX7D_PAD_GPIO1_IO09__PWM2_OUT	0x7f
 		>;
 	};
 
-	pinctrl_pwm3: pwm3 {
+	pinctrl_pwm3: pwm3grp {
 		fsl,pins = <
-			MX7D_PAD_GPIO1_IO10__PWM3_OUT   0x7f
+			MX7D_PAD_GPIO1_IO10__PWM3_OUT	0x7f
 		>;
 	};
 
-	pinctrl_pwm4: pwm4grp{
+	pinctrl_pwm4: pwm4grp {
 		fsl,pins = <
 			MX7D_PAD_GPIO1_IO11__PWM4_OUT	0x7f
 		>;
@@ -555,7 +563,7 @@
 		>;
 	};
 
-	pinctrl_usbotg1_pwr: usbotg_pwr {
+	pinctrl_usbotg1_pwr: usbotgpwrgrp {
 		fsl,pins = <
 			MX7D_PAD_UART3_TX_DATA__GPIO4_IO5	0x14
 		>;
@@ -573,7 +581,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
+	pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
 		fsl,pins = <
 			MX7D_PAD_SD1_CMD__SD1_CMD		0x5a
 			MX7D_PAD_SD1_CLK__SD1_CLK		0x1a
@@ -585,7 +593,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
+	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
 		fsl,pins = <
 			MX7D_PAD_SD1_CMD__SD1_CMD		0x5b
 			MX7D_PAD_SD1_CLK__SD1_CLK		0x1b
@@ -623,7 +631,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
 		fsl,pins = <
 			MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
 			MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
@@ -638,7 +646,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
 		fsl,pins = <
 			MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
 			MX7D_PAD_SD3_CLK__SD3_CLK		0x1b
diff --git a/arch/arm/boot/dts/imx7d-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx7d-pinfunc.h
index 69f2c1ec8254..69f2c1ec8254 100644
--- a/arch/arm/boot/dts/imx7d-pinfunc.h
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-pinfunc.h
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-remarkable2.dts b/arch/arm/boot/dts/nxp/imx/imx7d-remarkable2.dts
new file mode 100644
index 000000000000..ff9d50942884
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-remarkable2.dts
@@ -0,0 +1,595 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ * Copyright (C) 2019 reMarkable AS - http://www.remarkable.com/
+ *
+ */
+
+/dts-v1/;
+
+#include "imx7d.dtsi"
+#include <dt-bindings/input/linux-event-codes.h>
+
+/ {
+	model = "reMarkable 2.0";
+	compatible = "remarkable,imx7d-remarkable2", "fsl,imx7d";
+
+	chosen {
+		stdout-path = &uart6;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	thermal-zones {
+		epd-thermal {
+			thermal-sensors = <&sy7636a>;
+			polling-delay-passive = <30000>;
+			polling-delay = <30000>;
+
+			trips {
+				trip0 {
+					temperature = <49000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	reg_brcm: regulator-brcm {
+		compatible = "regulator-fixed";
+		regulator-name = "brcm_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_brcm_reg>;
+		gpio = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <150>;
+	};
+
+	reg_digitizer: regulator-digitizer {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_DIGITIZER";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&pinctrl_digitizer_reg>;
+		pinctrl-1 = <&pinctrl_digitizer_reg>;
+		gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100000>; /* 100 ms */
+	};
+
+	reg_touch: regulator-touch {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_TOUCH";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch_reg>;
+		gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi>;
+		reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+		clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
+		clock-names = "ext_clock";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&buck1>;
+};
+
+&clks {
+	assigned-clocks = <&clks IMX7D_CLKO2_ROOT_SRC>,
+			  <&clks IMX7D_CLKO2_ROOT_DIV>;
+	assigned-clock-parents = <&clks IMX7D_CKIL>;
+	assigned-clock-rates = <0>, <32768>;
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	wacom_digitizer: digitizer@9 {
+		compatible = "hid-over-i2c";
+		reg = <0x09>;
+		hid-descr-addr = <0x01>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wacom>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+		vdd-supply = <&reg_digitizer>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	bd71815: pmic@4b {
+		compatible = "rohm,bd71815";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bd71815>;
+		interrupt-parent = <&gpio6>; /* PMIC_INT_B GPIO6_IO16 */
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+		gpio-controller;
+		clocks = <&clks IMX7D_CLKO2_ROOT_SRC>;
+		clock-output-names = "bd71815-32k-out";
+		#clock-cells = <0>;
+		#gpio-cells = <2>;
+
+		regulators {
+			buck1: buck1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			buck2: buck2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			buck3: buck3 {
+				regulator-name = "buck3";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <2700000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4: buck4 {
+				regulator-name = "buck4";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: buck5 {
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: ldo1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: ldo2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: ldo3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: ldo4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: ldo5 {
+				regulator-name = "ldo5";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo6: ldodvref {
+				regulator-name = "ldodvref";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo7: ldolpsr {
+				regulator-name = "ldolpsr";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			boost: wled {
+				regulator-name = "wled";
+				regulator-min-microamp = <10>;
+				regulator-max-microamp = <25000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	touchscreen@24 {
+		compatible = "cypress,tt21000";
+		reg = <0x24>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_touch>;
+		touchscreen-size-x = <880>;
+		touchscreen-size-y = <1280>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@0 {
+			reg = <0>;
+			linux,keycodes = <KEY_HOMEPAGE>;
+		};
+
+		button@1 {
+			reg = <1>;
+			linux,keycodes = <KEY_MENU>;
+		};
+
+		button@2 {
+			reg = <2>;
+			linux,keycodes = <KEY_BACK>;
+		};
+
+		button@3 {
+			reg = <3>;
+			linux,keycodes = <KEY_SEARCH>;
+		};
+
+		button@4 {
+			reg = <4>;
+			linux,keycodes = <KEY_VOLUMEDOWN>;
+		};
+
+		button@5 {
+			reg = <5>;
+			linux,keycodes = <KEY_VOLUMEUP>;
+		};
+
+		button@6 {
+			reg = <6>;
+			linux,keycodes = <KEY_CAMERA>;
+		};
+
+		button@7 {
+			reg = <7>;
+			linux,keycodes = <KEY_POWER>;
+		};
+	};
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	sy7636a: pmic@62 {
+		compatible = "silergy,sy7636a";
+		reg = <0x62>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_epdpmic>;
+		#thermal-sensor-cells = <0>;
+		epd-pwr-good-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>;
+
+		regulators {
+			reg_epdpmic: vcom {
+				regulator-name = "vcom";
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	status = "okay";
+};
+
+&usbotg2 {
+	srp-disable;
+	hnp-disable;
+	status = "okay";
+};
+
+&usdhc2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	vmmc-supply = <&reg_brcm>;
+	bus-width = <4>;
+	non-removable;
+	keep-power-in-suspend;
+	cap-power-off-card;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc3>;
+	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc_lpsr {
+	pinctrl_digitizer_reg: digitizerreggrp {
+		fsl,pins = <
+			/* DIGITIZER_PWR_EN */
+			MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6	0x14
+		>;
+	};
+
+	pinctrl_wacom: wacomgrp {
+		fsl,pins = <
+			/*MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x00000014 FWE */
+			MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4	0x00000074 /* PDCTB */
+			MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1	0x00000034 /* WACOM INT */
+			/*MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6	0x00000014 WACOM PWR ENABLE */
+			/*MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0	0x00000074 WACOM RESET */
+		>;
+	};
+};
+
+&iomuxc {
+	pinctrl_bd71815: bd71815grp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16	0x59
+		>;
+	};
+
+	pinctrl_brcm_reg: brcmreggrp {
+		fsl,pins = <
+			/* WIFI_PWR_EN */
+			MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13	0x14
+		>;
+	};
+
+	pinctrl_epdpmic: epdpmicgrp {
+		fsl,pins = <
+			MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21	0x00000074
+			MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11	0x00000014
+		>;
+	};
+
+	pinctrl_touch: touchgrp {
+		fsl,pins = <
+			/* CYTTSP interrupt */
+			MX7D_PAD_GPIO1_IO14__GPIO1_IO14		0x54
+			/* CYTTSP reset */
+			MX7D_PAD_GPIO1_IO13__GPIO1_IO13		0x04
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
+			MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX7D_PAD_I2C2_SDA__I2C2_SDA		0x4000007f
+			MX7D_PAD_I2C2_SCL__I2C2_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX7D_PAD_I2C3_SDA__I2C3_SDA		0x4000007f
+			MX7D_PAD_I2C3_SCL__I2C3_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX7D_PAD_I2C4_SDA__I2C4_SDA		0x4000007f
+			MX7D_PAD_I2C4_SCL__I2C4_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_touch_reg: touchreggrp {
+		fsl,pins = <
+			/* TOUCH_PWR_EN */
+			MX7D_PAD_GPIO1_IO11__GPIO1_IO11		0x14
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
+			MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x79
+		>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA09__UART6_DCE_TX		0x79
+			MX7D_PAD_EPDC_DATA08__UART6_DCE_RX		0x79
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_CMD__SD2_CMD		0x59
+			MX7D_PAD_SD2_CLK__SD2_CLK		0x19
+			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x59
+			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x59
+			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x59
+			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x59
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_CMD__SD2_CMD		0x5a
+			MX7D_PAD_SD2_CLK__SD2_CLK		0x1a
+			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x5a
+			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x5a
+			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x5a
+			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x5a
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_CMD__SD2_CMD		0x5b
+			MX7D_PAD_SD2_CLK__SD2_CLK		0x1b
+			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x5b
+			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x5b
+			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x5b
+			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x5b
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
+			MX7D_PAD_SD3_STROBE__SD3_STROBE		0x19
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5a
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5a
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5a
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5a
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5a
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5a
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5a
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5a
+			MX7D_PAD_SD3_STROBE__SD3_STROBE		0x1a
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1b
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5b
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5b
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5b
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5b
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5b
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5b
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5b
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5b
+			MX7D_PAD_SD3_STROBE__SD3_STROBE		0x1b
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_COL__WDOG1_WDOG_ANY	0x74
+		>;
+	};
+
+	pinctrl_wifi: wifigrp {
+		fsl,pins = <
+			/* WiFi Reg On */
+			MX7D_PAD_SD2_CD_B__GPIO5_IO9		0x00000014
+			/* WiFi Sleep 32k */
+			MX7D_PAD_SD1_WP__CCM_CLKO2		0x00000014
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx7d-sbc-imx7.dts b/arch/arm/boot/dts/nxp/imx/imx7d-sbc-imx7.dts
index f8a868552707..f8a868552707 100644
--- a/arch/arm/boot/dts/imx7d-sbc-imx7.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-sbc-imx7.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-sdb-reva.dts b/arch/arm/boot/dts/nxp/imx/imx7d-sdb-reva.dts
new file mode 100644
index 000000000000..40156cd9195f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-sdb-reva.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright (C) 2015 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include "imx7d-sdb.dts"
+
+/ {
+	model = "Freescale i.MX7 SabreSD RevA Board";
+	compatible = "fsl,imx7d-sdb-reva", "fsl,imx7d";
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		pinctrl-0 = <&pinctrl_usb_otg2_vbus_reg_reva>;
+		gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&fec2 {
+	/delete-property/phy-supply;
+};
+
+&iomuxc {
+	pinctrl_tsc2046_pendown: tsc2046-pendowngrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA13__GPIO2_IO13	0x59
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX7D_PAD_ECSPI2_SS0__GPIO4_IO23		0x34  /* bt reg on */
+		>;
+	};
+
+	pinctrl_usb_otg2_vbus_reg_reva: usbotg2vbusregrevagrp {
+		fsl,pins = <
+			MX7D_PAD_UART3_CTS_B__GPIO4_IO7		0x14
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx7d-sdb-sht11.dts b/arch/arm/boot/dts/nxp/imx/imx7d-sdb-sht11.dts
index 996555596d40..996555596d40 100644
--- a/arch/arm/boot/dts/imx7d-sdb-sht11.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-sdb-sht11.dts
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts b/arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts
new file mode 100644
index 000000000000..a370e868cafe
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts
@@ -0,0 +1,941 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright (C) 2015 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+
+#include "imx7d.dtsi"
+
+/ {
+	model = "Freescale i.MX7 SabreSD Board";
+	compatible = "fsl,imx7d-sdb", "fsl,imx7d";
+
+	aliases {
+		ethernet0 = &fec1;
+		ethernet1 = &fec2;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
+		};
+	};
+
+	spi-4 {
+		compatible = "spi-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_spi4>;
+		sck-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		extended_io: gpio-expander@0 {
+			compatible = "fairchild,74hc595";
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0>;
+			registers-number = <1>;
+			spi-max-frequency = <100000>;
+		};
+	};
+
+	reg_sd1_vmmc: regulator-sd1-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_SD1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <200000>;
+		off-on-delay-us = <20000>;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg2_vbus";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_otg2_vbus_reg>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_vref_1v8: regulator-vref-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vref-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_brcm: regulator-brcm {
+		compatible = "regulator-fixed";
+		gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-name = "brcm_reg";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_brcm_reg>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <200000>;
+	};
+
+	reg_lcd_3v3: regulator-lcd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&extended_io 7 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_can2_3v3: regulator-can2-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "can2-3v3";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flexcan2_reg>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 14 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_fec2_3v3: regulator-fec2-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fec2-3v3";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enet2_reg>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_audio_5v: regulator-audio-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_audio_3v3: regulator-audio-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_audio_1v8: regulator-audio-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+	panel {
+		compatible = "innolux,at043tn24";
+		backlight = <&backlight>;
+		power-supply = <&reg_lcd_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx7d-evk-wm8960",
+			     "fsl,imx-audio-wm8960";
+		model = "wm8960-audio";
+		audio-cpu = <&sai1>;
+		audio-codec = <&codec>;
+		hp-det-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
+		audio-routing =
+			"Headphone Jack", "HP_L",
+			"Headphone Jack", "HP_R",
+			"Ext Spk", "SPK_LP",
+			"Ext Spk", "SPK_LN",
+			"Ext Spk", "SPK_RP",
+			"Ext Spk", "SPK_RN",
+			"LINPUT1", "AMIC",
+			"AMIC", "MICB";
+	};
+
+	sound-hdmi {
+		compatible = "fsl,imx-audio-sii902x";
+		model = "sii902x-audio";
+		audio-cpu = <&sai3>;
+		hdmi-out;
+	};
+};
+
+&adc1 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&adc2 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&sw1a_reg>;
+};
+
+&cpu1 {
+	cpu-supply = <&sw1a_reg>;
+};
+
+&ecspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tsc2046@0 {
+		compatible = "ti,tsc2046";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tsc2046_pendown>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <29 0>;
+		pendown-gpio = <&gpio2 29 GPIO_ACTIVE_LOW>;
+		touchscreen-max-pressure = <255>;
+		wakeup-source;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	phy-reset-gpios = <&extended_io 5 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET2_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy1>;
+	phy-supply = <&reg_fec2_3v3>;
+	fsl,magic-packet;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can2_3v3>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			/* use sw1c_reg to align with pfuze100/pfuze200 */
+			sw1c_reg: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	mpl3115@60 {
+		compatible = "fsl,mpl3115";
+		reg = <0x60>;
+		vdd-supply = <&reg_audio_3v3>;
+		vddio-supply = <&reg_audio_3v3>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	codec: wm8960@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
+		clock-names = "mclk";
+		wlf,shared-lrclk;
+		wlf,hp-cfg = <2 2 3>;
+		wlf,gpio-cfg = <1 3>;
+		assigned-clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_SRC>,
+				  <&clks IMX7D_PLL_AUDIO_POST_DIV>,
+				  <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
+		assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+		assigned-clock-rates = <0>, <884736000>, <12288000>;
+		AVDD-supply = <&reg_audio_3v3>;
+		DBVDD-supply = <&reg_audio_1v8>;
+		DCVDD-supply = <&reg_audio_1v8>;
+		SPKVDD1-supply = <&reg_audio_5v>;
+		SPKVDD2-supply = <&reg_audio_5v>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif>;
+	status = "okay";
+
+	port {
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&pcie {
+	reset-gpio = <&extended_io 1 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&reg_1p0d {
+	vin-supply = <&sw2_reg>;
+};
+
+&reg_1p2 {
+	vin-supply = <&sw2_reg>;
+};
+
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>,
+			  <&clks IMX7D_PLL_AUDIO_POST_DIV>,
+			  <&clks IMX7D_SAI1_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+	assigned-clock-rates = <0>, <884736000>, <36864000>;
+	status = "okay";
+};
+
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3 &pinctrl_sai3_mclk>;
+	assigned-clocks = <&clks IMX7D_SAI3_ROOT_SRC>,
+			  <&clks IMX7D_PLL_AUDIO_POST_DIV>,
+			  <&clks IMX7D_SAI3_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+	assigned-clock-rates = <0>, <884736000>, <36864000>;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>;
+	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_sd1_vmmc>;
+	wakeup-source;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	wakeup-source;
+	keep-power-in-suspend;
+	non-removable;
+	vmmc-supply = <&reg_brcm>;
+	fsl,tuning-step = <2>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	fsl,tuning-step = <2>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_brcm_reg: brcmreggrp {
+		fsl,pins = <
+			MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21	0x14
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX7D_PAD_SAI2_TX_SYNC__ECSPI3_MISO	0x2
+			MX7D_PAD_SAI2_TX_BCLK__ECSPI3_MOSI	0x2
+			MX7D_PAD_SAI2_RX_DATA__ECSPI3_SCLK	0x2
+			MX7D_PAD_SD2_CD_B__GPIO5_IO9		0x59
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO10__ENET1_MDIO			0x3
+			MX7D_PAD_GPIO1_IO11__ENET1_MDC			0x3
+			MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC	0x1
+			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x1
+			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x1
+			MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2	0x1
+			MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3	0x1
+			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x1
+			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC	0x1
+			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x1
+			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x1
+			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x1
+			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x1
+			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x1
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC		0x1
+			MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0		0x1
+			MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1		0x1
+			MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2		0x1
+			MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3		0x1
+			MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL		0x1
+			MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC		0x1
+			MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0		0x1
+			MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1		0x1
+			MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2		0x1
+			MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3		0x1
+			MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL		0x1
+		>;
+	};
+
+	pinctrl_enet2_reg: enet2reggrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4	0x14
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX	0x59
+			MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX	0x59
+		>;
+	};
+
+	pinctrl_flexcan2_reg: flexcan2reggrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA14__GPIO2_IO14	0x59	/* CAN_STBY */
+		>;
+	};
+
+	pinctrl_gpio_keys: gpio-keysgrp {
+		fsl,pins = <
+			MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x59
+			MX7D_PAD_SD2_WP__GPIO5_IO10		0x59
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX7D_PAD_ECSPI2_SS0__GPIO4_IO23		0x34  /* bt reg on */
+			MX7D_PAD_EPDC_BDR0__GPIO2_IO28		0x59  /* headphone detect */
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
+			MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX7D_PAD_I2C2_SDA__I2C2_SDA		0x4000007f
+			MX7D_PAD_I2C2_SCL__I2C2_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX7D_PAD_I2C3_SDA__I2C3_SDA		0x4000007f
+			MX7D_PAD_I2C3_SCL__I2C3_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA		0x4000007f
+			MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_lcdif: lcdifgrp {
+		fsl,pins = <
+			MX7D_PAD_LCD_DATA00__LCD_DATA0		0x79
+			MX7D_PAD_LCD_DATA01__LCD_DATA1		0x79
+			MX7D_PAD_LCD_DATA02__LCD_DATA2		0x79
+			MX7D_PAD_LCD_DATA03__LCD_DATA3		0x79
+			MX7D_PAD_LCD_DATA04__LCD_DATA4		0x79
+			MX7D_PAD_LCD_DATA05__LCD_DATA5		0x79
+			MX7D_PAD_LCD_DATA06__LCD_DATA6		0x79
+			MX7D_PAD_LCD_DATA07__LCD_DATA7		0x79
+			MX7D_PAD_LCD_DATA08__LCD_DATA8		0x79
+			MX7D_PAD_LCD_DATA09__LCD_DATA9		0x79
+			MX7D_PAD_LCD_DATA10__LCD_DATA10		0x79
+			MX7D_PAD_LCD_DATA11__LCD_DATA11		0x79
+			MX7D_PAD_LCD_DATA12__LCD_DATA12		0x79
+			MX7D_PAD_LCD_DATA13__LCD_DATA13		0x79
+			MX7D_PAD_LCD_DATA14__LCD_DATA14		0x79
+			MX7D_PAD_LCD_DATA15__LCD_DATA15		0x79
+			MX7D_PAD_LCD_DATA16__LCD_DATA16		0x79
+			MX7D_PAD_LCD_DATA17__LCD_DATA17		0x79
+			MX7D_PAD_LCD_DATA18__LCD_DATA18		0x79
+			MX7D_PAD_LCD_DATA19__LCD_DATA19		0x79
+			MX7D_PAD_LCD_DATA20__LCD_DATA20		0x79
+			MX7D_PAD_LCD_DATA21__LCD_DATA21		0x79
+			MX7D_PAD_LCD_DATA22__LCD_DATA22		0x79
+			MX7D_PAD_LCD_DATA23__LCD_DATA23		0x79
+			MX7D_PAD_LCD_CLK__LCD_CLK		0x79
+			MX7D_PAD_LCD_ENABLE__LCD_ENABLE		0x79
+			MX7D_PAD_LCD_VSYNC__LCD_VSYNC		0x79
+			MX7D_PAD_LCD_HSYNC__LCD_HSYNC		0x79
+			MX7D_PAD_LCD_RESET__LCD_RESET		0x79
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_MCLK__SAI1_MCLK           0x1f
+			MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK     0x1f
+			MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC	0x1f
+			MX7D_PAD_ENET1_COL__SAI1_TX_DATA0	0x30
+			MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0	0x1f
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX7D_PAD_SAI2_TX_BCLK__SAI2_TX_BCLK     0x1f
+			MX7D_PAD_SAI2_TX_SYNC__SAI2_TX_SYNC     0x1f
+			MX7D_PAD_SAI2_TX_DATA__SAI2_TX_DATA0    0x30
+			MX7D_PAD_SAI2_RX_DATA__SAI2_RX_DATA0    0x1f
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX7D_PAD_UART3_TX_DATA__SAI3_TX_BCLK   0x1f
+			MX7D_PAD_UART3_CTS_B__SAI3_TX_SYNC     0x1f
+			MX7D_PAD_UART3_RTS_B__SAI3_TX_DATA0    0x30
+		>;
+	};
+
+	pinctrl_spi4: spi4grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO09__GPIO1_IO9	0x59
+			MX7D_PAD_GPIO1_IO12__GPIO1_IO12	0x59
+			MX7D_PAD_GPIO1_IO13__GPIO1_IO13	0x59
+		>;
+	};
+
+	pinctrl_tsc2046_pendown: tsc2046-pendowngrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_BDR1__GPIO2_IO29		0x59
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
+			MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x79
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_TX_BCLK__UART5_DCE_TX	0x79
+			MX7D_PAD_SAI1_RX_DATA__UART5_DCE_RX	0x79
+			MX7D_PAD_SAI1_TX_SYNC__UART5_DCE_CTS	0x79
+			MX7D_PAD_SAI1_TX_DATA__UART5_DCE_RTS	0x79
+		>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins = <
+			MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX	0x79
+			MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX	0x79
+			MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS	0x79
+			MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS	0x79
+		>;
+	};
+
+	pinctrl_usdhc1_gpio: usdhc1-gpiogrp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x59 /* CD */
+			MX7D_PAD_SD1_WP__GPIO5_IO1		0x59 /* WP */
+			MX7D_PAD_SD1_RESET_B__GPIO5_IO2		0x59 /* vmmc */
+			MX7D_PAD_GPIO1_IO08__SD1_VSELECT	0x59 /* VSELECT */
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x59
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x19
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x5a
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x1a
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5a
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5a
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5a
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5a
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x5b
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x1b
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5b
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5b
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5b
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5b
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_CMD__SD2_CMD		0x59
+			MX7D_PAD_SD2_CLK__SD2_CLK		0x19
+			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x59
+			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x59
+			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x59
+			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x59
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_CMD__SD2_CMD		0x5a
+			MX7D_PAD_SD2_CLK__SD2_CLK		0x1a
+			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x5a
+			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x5a
+			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x5a
+			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x5a
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_CMD__SD2_CMD		0x5b
+			MX7D_PAD_SD2_CLK__SD2_CLK		0x1b
+			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x5b
+			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x5b
+			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x5b
+			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x5b
+		>;
+	};
+
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
+			MX7D_PAD_SD3_STROBE__SD3_STROBE		0x19
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5a
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5a
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5a
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5a
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5a
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5a
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5a
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5a
+			MX7D_PAD_SD3_STROBE__SD3_STROBE		0x1a
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1b
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5b
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5b
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5b
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5b
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5b
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5b
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5b
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5b
+			MX7D_PAD_SD3_STROBE__SD3_STROBE		0x1b
+		>;
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&iomuxc_lpsr {
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B		0x74
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT		0x30
+		>;
+	};
+
+	pinctrl_usb_otg2_vbus_reg: usbotg2vbusreggrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7	  0x14
+		>;
+	};
+
+	pinctrl_sai3_mclk: sai3-mclk-grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO03__SAI3_MCLK	0x1f
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-smegw01.dts b/arch/arm/boot/dts/nxp/imx/imx7d-smegw01.dts
new file mode 100644
index 000000000000..7ed27c7ad726
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-smegw01.dts
@@ -0,0 +1,468 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+//
+// Copyright (C) 2020 PHYTEC Messtechnik GmbH
+// Author: Jens Lang  <J.Lang@phytec.de>
+// Copyright (C) 2021 Fabio Estevam <festevam@denx.de>
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "imx7d.dtsi"
+
+/ {
+	model = "Storopack SMEGW01 board";
+	compatible = "storopack,imx7d-smegw01", "fsl,imx7d";
+
+	aliases {
+		ethernet0 = &fec1;
+		ethernet1 = &fec2;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc3;
+		mmc2 = &usdhc2;
+		rtc0 = &i2c_rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reg_lte_on: regulator-lte-on {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lte_on>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "lte_on";
+		gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_lte_nreset: regulator-lte-nreset {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lte_nreset>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "LTE_nReset";
+		gpio = <&gpio6 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_wifi: regulator-wifi {
+		compatible = "regulator-fixed";
+		gpio = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi>;
+		regulator-name = "wifi_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_wlan_rfkill: regulator-wlan-rfkill {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rfkill>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "wlan_rfkill";
+		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_usbotg_vbus: regulator-usbotg-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg1_pwr_gpio>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 05 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	sram@0 {
+		compatible = "microchip,48l640";
+		reg = <0>;
+		spi-max-frequency = <16000000>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-id0022.1622",
+				     "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+		};
+
+		ethphy1: ethernet-phy@2 {
+			compatible = "ethernet-phy-id0022.1622",
+				     "ethernet-phy-ieee802.3-c22";
+			reg = <2>;
+		};
+	};
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET2_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy1>;
+	fsl,magic-packet;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	i2c_rtc: rtc@52 {
+		compatible = "microcrystal,rv3028";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc_int>;
+		reg = <0x52>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1_lpsr>;
+	dr_mode = "otg";
+	vbus-supply = <&reg_usbotg_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg2>;
+	over-current-active-low;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	wakeup-source;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	no-1-8-v;
+	non-removable;
+	vmmc-supply = <&reg_wifi>;
+	wakeup-source;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+	assigned-clock-rates = <400000000>;
+	max-frequency = <200000000>;
+	bus-width = <8>;
+	fsl,tuning-step = <1>;
+	non-removable;
+	cap-mmc-highspeed;
+	cap-mmc-hw-reset;
+	mmc-hs200-1_8v;
+	mmc-ddr-1_8v;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX7D_PAD_ECSPI1_SS0__GPIO4_IO19	0x04
+			MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK	0x04
+			MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI	0x04
+			MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO	0x04
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x5
+			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x5
+			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x5
+			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x5
+			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x5
+			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC	0x5
+			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x5
+			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x5
+			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x5
+			MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2	0x5
+			MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3	0x5
+			MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC	0x5
+			MX7D_PAD_GPIO1_IO10__ENET1_MDIO		0x7
+			MX7D_PAD_GPIO1_IO11__ENET1_MDC		0x7
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x5
+			MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC	0x5
+			MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0	0x5
+			MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1	0x5
+			MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2	0x5
+			MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3	0x5
+			MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0	0x5
+			MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1	0x5
+			MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2	0x5
+			MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3	0x5
+			MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x5
+			MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC	0x5
+			MX7D_PAD_GPIO1_IO09__GPIO1_IO9	0x08
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX7D_PAD_I2C2_SCL__I2C2_SCL		0x40000004
+			MX7D_PAD_I2C2_SDA__I2C2_SDA		0x40000004
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX	0x0b0b0
+			MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX	0x0b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX	0x0b0b0
+			MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX	0x0b0b0
+		>;
+	};
+
+	pinctrl_lte_on: lteongrp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12	0x17059
+		>;
+	};
+
+	pinctrl_lte_nreset: ltenresetgrp {
+		fsl,pins = <
+			MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21	0x17059
+		>;
+	};
+
+	pinctrl_rfkill: rfkillgrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA11__GPIO2_IO11	0x17059
+		>;
+	};
+
+	pinctrl_rtc_int: rtcintgrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA15__GPIO2_IO15	0x17059
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x74
+			MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x7c
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX	0x7c
+			MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX	0x74
+		>;
+	};
+
+	pinctrl_usbotg1_lpsr: usbotg1grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC	0x04
+		>;
+	};
+
+	pinctrl_usbotg1_pwr: usbotg1-pwrgrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO05__USB_OTG1_PWR	0x04
+		>;
+	};
+
+	pinctrl_usbotg1_pwr_gpio: usbotg1-pwr-gpiogrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x04
+		>;
+	};
+
+	pinctrl_usbotg2: usbotg2grp {
+		fsl,pins = <
+			MX7D_PAD_UART3_RTS_B__USB_OTG2_OC	0x5c
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x59
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x59
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x19
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_CLK__SD2_CLK		0x19
+			MX7D_PAD_SD2_CMD__SD2_CMD		0x59
+			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x59
+			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x59
+			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x59
+			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x59
+			MX7D_PAD_SD2_CD_B__SD2_CD_B		0x08
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5d
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1d
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5d
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5d
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5d
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5d
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5d
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5d
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5d
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5d
+			MX7D_PAD_SD3_STROBE__SD3_STROBE	0x1d
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5e
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1e
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5e
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5e
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5e
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5e
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5e
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5e
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5e
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5e
+			MX7D_PAD_SD3_STROBE__SD3_STROBE	0x1e
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5f
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x0f
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5f
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5f
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5f
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5f
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5f
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5f
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5f
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5f
+			MX7D_PAD_SD3_STROBE__SD3_STROBE	0x1f
+		>;
+	};
+
+	pinctrl_wifi: wifigrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30	0x04
+			MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x04
+		>;
+	};
+};
+
+&iomuxc_lpsr {
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x74
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-tqma7.dtsi b/arch/arm/boot/dts/nxp/imx/imx7d-tqma7.dtsi
new file mode 100644
index 000000000000..3ee2017c1ab3
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-tqma7.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Device Tree Include file for TQ-Systems TQMa7D board with NXP i.MX7Dual SoC.
+ *
+ * Copyright (C) 2016 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
+ */
+
+#include "imx7d.dtsi"
+#include "imx7-tqma7.dtsi"
+
+&cpu1 {
+	cpu-supply = <&sw1a_reg>;
+};
diff --git a/arch/arm/boot/dts/imx7d-zii-rmu2.dts b/arch/arm/boot/dts/nxp/imx/imx7d-zii-rmu2.dts
index 1065941807e8..8f5566027c25 100644
--- a/arch/arm/boot/dts/imx7d-zii-rmu2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-zii-rmu2.dts
@@ -24,7 +24,7 @@
 		pinctrl-0 = <&pinctrl_leds_debug>;
 		pinctrl-names = "default";
 
-		debug {
+		led-debug {
 			label = "zii:green:debug1";
 			gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
@@ -204,7 +204,7 @@
 	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
 	status = "okay";
 
-	rave-sp {
+	mcu {
 		compatible = "zii,rave-sp-rdu2";
 		current-speed = <1000000>;
 		#address-cells = <1>;
@@ -350,7 +350,7 @@
 
 &iomuxc_lpsr {
 	pinctrl_enet1_phy_interrupt: enet1phyinterruptgrp {
-		fsl,phy = <
+		fsl,pins = <
 			MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2	0x08
 		>;
 	};
diff --git a/arch/arm/boot/dts/imx7d-zii-rpu2.dts b/arch/arm/boot/dts/nxp/imx/imx7d-zii-rpu2.dts
index 893bd30aa2a3..decc19af3b83 100644
--- a/arch/arm/boot/dts/imx7d-zii-rpu2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-zii-rpu2.dts
@@ -36,7 +36,7 @@
 		pinctrl-0 = <&pinctrl_leds_debug>;
 		pinctrl-names = "default";
 
-		debug {
+		led-debug {
 			label = "zii:green:debug1";
 			gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
@@ -607,7 +607,7 @@
 	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
 	status = "okay";
 
-	rave-sp {
+	mcu {
 		compatible = "zii,rave-sp-rdu2";
 		current-speed = <1000000>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d.dtsi b/arch/arm/boot/dts/nxp/imx/imx7d.dtsi
new file mode 100644
index 000000000000..d961c61a93af
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7d.dtsi
@@ -0,0 +1,226 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2015 Freescale Semiconductor, Inc.
+// Copyright 2016 Toradex AG
+
+#include "imx7s.dtsi"
+#include <dt-bindings/reset/imx7-reset.h>
+
+/ {
+	aliases {
+		usb0 = &usbotg1;
+		usb1 = &usbotg2;
+		usb2 = &usbh;
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			clock-frequency = <996000000>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+			nvmem-cells = <&fuse_grade>;
+			nvmem-cell-names = "speed_grade";
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+			clock-frequency = <996000000>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+			cpu-idle-states = <&cpu_sleep_wait>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&intc>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	cpu0_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-792000000 {
+			opp-hz = /bits/ 64 <792000000>;
+			opp-microvolt = <1000000 950000 1250000>;
+			clock-latency-ns = <150000>;
+			opp-supported-hw = <0xd>, <0x7>;
+			opp-suspend;
+		};
+
+		opp-996000000 {
+			opp-hz = /bits/ 64 <996000000>;
+			opp-microvolt = <1100000 1045000 1250000>;
+			clock-latency-ns = <150000>;
+			opp-supported-hw = <0xc>, <0x7>;
+			opp-suspend;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1225000 1200000 1250000>;
+			clock-latency-ns = <150000>;
+			opp-supported-hw = <0x8>, <0x3>;
+			opp-suspend;
+		};
+	};
+
+	usbphynop2: usbphynop2 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX7D_USB_PHY2_CLK>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
+	};
+
+	soc: soc {
+		etm@3007d000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0x3007d000 0x1000>;
+
+			/*
+			 * System will hang if added nosmp in kernel command line
+			 * without arm,primecell-periphid because amba bus try to
+			 * read id and core1 power off at this time.
+			 */
+			arm,primecell-periphid = <0xbb956>;
+			cpu = <&cpu1>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm1_out_port: endpoint {
+						remote-endpoint = <&ca_funnel_in_port1>;
+					};
+				};
+			};
+		};
+
+		intc: interrupt-controller@31001000 {
+			compatible = "arm,cortex-a7-gic";
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupt-parent = <&intc>;
+			reg = <0x31001000 0x1000>,
+			      <0x31002000 0x2000>,
+			      <0x31004000 0x2000>,
+			      <0x31006000 0x2000>;
+		};
+
+		pcie: pcie@33800000 {
+			compatible = "fsl,imx7d-pcie";
+			reg = <0x33800000 0x4000>,
+			      <0x4ff00000 0x80000>;
+			reg-names = "dbi", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0 0          0x4ff80000 0 0x00010000>, /* downstream I/O */
+				 <0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>; /* non-prefetchable memory */
+			num-lanes = <1>;
+			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			/*
+			 * Reference manual lists pci irqs incorrectly
+			 * Real hardware ordering is same as imx6: D+MSI, C, B, A
+			 */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>,
+				 <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>,
+				 <&clks IMX7D_PCIE_PHY_ROOT_CLK>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy";
+			assigned-clocks = <&clks IMX7D_PCIE_CTRL_ROOT_SRC>,
+					  <&clks IMX7D_PCIE_PHY_ROOT_SRC>;
+			assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_250M_CLK>,
+						 <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+
+			fsl,max-link-speed = <2>;
+			power-domains = <&pgc_pcie_phy>;
+			resets = <&src IMX7_RESET_PCIEPHY>,
+				 <&src IMX7_RESET_PCIE_CTRL_APPS_EN>,
+				 <&src IMX7_RESET_PCIE_CTRL_APPS_TURNOFF>;
+			reset-names = "pciephy", "apps", "turnoff";
+			fsl,imx7d-pcie-phy = <&pcie_phy>;
+			status = "disabled";
+		};
+	};
+};
+
+&aips2 {
+	pcie_phy: pcie-phy@306d0000 {
+		  compatible = "fsl,imx7d-pcie-phy";
+		  reg = <0x306d0000 0x10000>;
+		  status = "disabled";
+	};
+
+	pxp: pxp@30700000 {
+		compatible = "fsl,imx7d-pxp";
+		reg = <0x30700000 0x10000>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clks IMX7D_PXP_CLK>;
+		clock-names = "axi";
+	};
+};
+
+&aips3 {
+	usbotg2: usb@30b20000 {
+		compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
+		reg = <0x30b20000 0x200>;
+		interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clks IMX7D_USB_CTRL_CLK>;
+		fsl,usbphy = <&usbphynop2>;
+		fsl,usbmisc = <&usbmisc2 0>;
+		phy-clkgate-delay-us = <400>;
+		status = "disabled";
+	};
+
+	usbmisc2: usbmisc@30b20200 {
+		#index-cells = <1>;
+		compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
+		reg = <0x30b20200 0x200>;
+	};
+
+	fec2: ethernet@30bf0000 {
+		compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
+		reg = <0x30bf0000 0x10000>;
+		interrupt-names = "int0", "int1", "int2", "pps";
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clks IMX7D_ENET2_IPG_ROOT_CLK>,
+			<&clks IMX7D_ENET_AXI_ROOT_CLK>,
+			<&clks IMX7D_ENET2_TIME_ROOT_CLK>,
+			<&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
+			<&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
+		clock-names = "ipg", "ahb", "ptp",
+			"enet_clk_ref", "enet_out";
+		fsl,num-tx-queues = <3>;
+		fsl,num-rx-queues = <3>;
+		fsl,stop-mode = <&gpr 0x10 4>;
+		status = "disabled";
+	};
+};
+
+&ca_funnel_in_ports {
+	port@1 {
+		reg = <1>;
+		ca_funnel_in_port1: endpoint {
+			remote-endpoint = <&etm1_out_port>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7s-colibri-aster.dts b/arch/arm/boot/dts/nxp/imx/imx7s-colibri-aster.dts
new file mode 100644
index 000000000000..58ebb02d948a
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7s-colibri-aster.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017-2022 Toradex
+ *
+ */
+
+/dts-v1/;
+#include "imx7s-colibri.dtsi"
+#include "imx7-colibri-aster.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7S on Aster Carrier Board";
+	compatible = "toradex,colibri-imx7s-aster",
+		     "toradex,colibri-imx7s",
+		     "fsl,imx7s";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+&atmel_mxt_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7s-colibri-eval-v3.dts b/arch/arm/boot/dts/nxp/imx/imx7s-colibri-eval-v3.dts
new file mode 100644
index 000000000000..38de76630d6a
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7s-colibri-eval-v3.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2016-2022 Toradex
+ */
+
+/dts-v1/;
+#include "imx7s-colibri.dtsi"
+#include "imx7-colibri-eval-v3.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7S on Colibri Evaluation Board V3";
+	compatible = "toradex,colibri-imx7s-eval-v3",
+		     "toradex,colibri-imx7s",
+		     "fsl,imx7s";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+/*
+ * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3.
+ * So if you enable following capacitive touch controller, disable pwm2/pwm3 first.
+ */
+&atmel_mxt_ts {
+	status = "disabled";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+/* Colibri PWM<B> */
+&pwm2 {
+	/* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+	status = "okay";
+};
+
+/* Colibri PWM<C> */
+&pwm3 {
+	/* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7s-colibri-iris-v2.dts b/arch/arm/boot/dts/nxp/imx/imx7s-colibri-iris-v2.dts
new file mode 100644
index 000000000000..72b5c17ab1ab
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7s-colibri-iris-v2.dts
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+#include "imx7s-colibri.dtsi"
+#include "imx7-colibri-iris-v2.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7S on Iris V2 Carrier Board";
+	compatible = "toradex,colibri-imx7s-iris-v2",
+		     "toradex,colibri-imx7s",
+		     "fsl,imx7s";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+&atmel_mxt_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&gpio2 {
+	/*
+	 * This switches the LVDS transceiver to VESA color mapping mode.
+	 */
+	lvds-color-map-hog {
+		gpio-hog;
+		gpios = <13 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */
+		line-name = "LVDS_COLOR_MAP";
+		output-low;
+	};
+};
+
+&gpio7 {
+	/*
+	 * This switches the LVDS transceiver to the 24-bit RGB mode.
+	 */
+	lvds-rgb-mode-hog {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */
+		line-name = "LVDS_RGB_MODE";
+		output-low;
+	};
+
+	/*
+	 * This switches the LVDS transceiver to the single-channel
+	 * output mode.
+	 */
+	lvds-ch-mode-hog {
+		gpio-hog;
+		gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */
+		line-name = "LVDS_CH_MODE";
+		output-high;
+	};
+
+	/* This turns the LVDS transceiver on */
+	lvds-power-on-hog {
+		gpio-hog;
+		gpios = <11 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */
+		line-name = "LVDS_POWER_ON";
+		output-high;
+	};
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7s-colibri-iris.dts b/arch/arm/boot/dts/nxp/imx/imx7s-colibri-iris.dts
new file mode 100644
index 000000000000..26ba72c17feb
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7s-colibri-iris.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+#include "imx7s-colibri.dtsi"
+#include "imx7-colibri-iris.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7S on Iris Carrier Board";
+	compatible = "toradex,colibri-imx7s-iris",
+		     "toradex,colibri-imx7s",
+		     "fsl,imx7s";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+/*
+ * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3.
+ * So if you enable following capacitive touch controller, disable pwm2/pwm3 first.
+ */
+&atmel_mxt_ts {
+	status = "disabled";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+/* Colibri PWM<B> */
+&pwm2 {
+	/* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+	status = "okay";
+};
+
+/* Colibri PWM<C> */
+&pwm3 {
+	/* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7s-colibri.dtsi b/arch/arm/boot/dts/nxp/imx/imx7s-colibri.dtsi
new file mode 100644
index 000000000000..ef51395d3537
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7s-colibri.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2016-2022 Toradex
+ */
+
+#include "imx7s.dtsi"
+#include "imx7-colibri.dtsi"
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+};
+
+/* NAND */
+&gpmi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7s-mba7.dts b/arch/arm/boot/dts/nxp/imx/imx7s-mba7.dts
new file mode 100644
index 000000000000..8e4cf589c92c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7s-mba7.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Device Tree Source for TQ-Systems TQMa7S board on MBa7 carrier board.
+ *
+ * Copyright (C) 2016 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "imx7s-tqma7.dtsi"
+#include "imx7-mba7.dtsi"
+
+/ {
+	model = "TQ-Systems TQMa7S board on MBa7 carrier board";
+	compatible = "tq,imx7s-mba7", "tq,imx7s-tqma7", "fsl,imx7s";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7s-tqma7.dtsi b/arch/arm/boot/dts/nxp/imx/imx7s-tqma7.dtsi
new file mode 100644
index 000000000000..7a190fdb2d30
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx7s-tqma7.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Device Tree Include file for TQ-Systems TQMa7S board with NXP i.MX7Solo SoC.
+ *
+ * Copyright (C) 2016 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
+ */
+
+#include "imx7s.dtsi"
+#include "imx7-tqma7.dtsi"
diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts
index 569bbd84e371..92b6258059ee 100644
--- a/arch/arm/boot/dts/imx7s-warp.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts
@@ -23,7 +23,7 @@
 		pinctrl-0 = <&pinctrl_gpio>;
 		autorepeat;
 
-		back {
+		key-back {
 			label = "Back";
 			gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_BACK>;
@@ -31,28 +31,11 @@
 		};
 	};
 
-	reg_brcm: regulator-brcm {
+	reg_3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_brcm_reg>;
-		regulator-name = "brcm_reg";
+		regulator-name = "3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <200000>;
-	};
-
-	reg_bt: regulator-bt {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_bt_reg>;
-		enable-active-high;
-		gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
-		regulator-name = "bt_reg";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
 	};
 
 	reg_peri_3p15v: regulator-peri-3p15v {
@@ -63,6 +46,14 @@
 		regulator-always-on;
 	};
 
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_brcm_reg>;
+		post-power-on-delay-ms = <200>;
+		reset-gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
+	};
+
 	sound {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "imx7-sgtl5000";
@@ -75,7 +66,7 @@
 
 		dailink_master: simple-audio-card,codec {
 			sound-dai = <&codec>;
-			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		};
 	};
 };
@@ -94,7 +85,7 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pmic: pfuze3000@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze3000";
 		reg = <0x08>;
 
@@ -210,6 +201,7 @@
 				remote-endpoint = <&mipi_from_sensor>;
 				clock-lanes = <0>;
 				data-lanes = <1>;
+				link-frequencies = /bits/ 64 <330000000>;
 			};
 		};
 	};
@@ -232,7 +224,7 @@
 		#sound-dai-cells = <0>;
 		reg = <0x0a>;
 		compatible = "fsl,sgtl5000";
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_sai1_mclk>;
 		VDDA-supply = <&vgen4_reg>;
@@ -243,22 +235,24 @@
 	mpl3115@60 {
 		compatible = "fsl,mpl3115";
 		reg = <0x60>;
+		vdd-supply = <&reg_3v3>;
+		vddio-supply = <&reg_3v3>;
 	};
 };
 
 &mipi_csi {
 	clock-frequency = <166000000>;
-	fsl,csis-hs-settle = <3>;
 	status = "okay";
 
-	port@0 {
-		reg = <0>;
+	ports {
+		port@0 {
+			reg = <0>;
 
-		mipi_from_sensor: endpoint {
-			remote-endpoint = <&ov2680_to_mipi>;
-			data-lanes = <1>;
+			mipi_from_sensor: endpoint {
+				remote-endpoint = <&ov2680_to_mipi>;
+				data-lanes = <1>;
+			};
 		};
-
 	};
 };
 
@@ -287,6 +281,14 @@
 	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
 	uart-has-rtscts;
 	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bt_reg>;
+		shutdown-gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+		max-speed = <3000000>;
+	};
 };
 
 &uart6 {
@@ -304,14 +306,21 @@
 };
 
 &usdhc1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
 	bus-width = <4>;
 	keep-power-in-suspend;
 	no-1-8-v;
 	non-removable;
-	vmmc-supply = <&reg_brcm>;
+	mmc-pwrseq = <&sdio_pwrseq>;
 	status = "okay";
+
+	wifi@0 {
+		compatible = "brcm,bcm43455-fmac", "brcm,bcm4329-fmac";
+		reg = <0>;
+	};
 };
 
 &usdhc3 {
@@ -458,7 +467,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
 		fsl,pins = <
 			MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
 			MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
@@ -474,7 +483,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
 		fsl,pins = <
 			MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
 			MX7D_PAD_SD3_CLK__SD3_CLK		0x1b
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/nxp/imx/imx7s.dtsi
index 1843fc053870..9235dd7e93bb 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7s.dtsi
@@ -73,9 +73,24 @@
 			device_type = "cpu";
 			reg = <0>;
 			clock-frequency = <792000000>;
-			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clks IMX7D_CLK_ARM>;
 			cpu-idle-states = <&cpu_sleep_wait>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+			nvmem-cells = <&fuse_grade>;
+			nvmem-cell-names = "speed_grade";
+		};
+	};
+
+	cpu0_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-792000000 {
+			opp-hz = /bits/ 64 <792000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <150000>;
+			opp-supported-hw = <0xf>, <0xf>;
 		};
 	};
 
@@ -104,6 +119,7 @@
 		compatible = "usb-nop-xceiv";
 		clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
 		clock-names = "main_clk";
+		power-domains = <&pgc_hsic_phy>;
 		#phy-cells = <0>;
 	};
 
@@ -159,13 +175,50 @@
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
-	soc {
+	video_mux: csi-mux {
+		compatible = "video-mux";
+		mux-controls = <&mux 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		port@0 {
+			reg = <0>;
+		};
+
+		port@1 {
+			reg = <1>;
+
+			csi_mux_from_mipi_vc0: endpoint {
+				remote-endpoint = <&mipi_vc0_to_csi_mux>;
+			};
+		};
+
+		port@2 {
+			reg = <2>;
+
+			csi_mux_to_csi: endpoint {
+				remote-endpoint = <&csi_from_csi_mux>;
+			};
+		};
+	};
+
+	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
 		interrupt-parent = <&gpc>;
 		ranges;
 
+		ocram: sram@900000 {
+			compatible = "mmio-sram";
+			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&clks IMX7D_OCRAM_CLK>;
+		};
+
 		funnel@30041000 {
 			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
 			reg = <0x30041000 0x1000>;
@@ -173,7 +226,11 @@
 			clock-names = "apb_pclk";
 
 			ca_funnel_in_ports: in-ports {
-				port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
 					ca_funnel_in_port0: endpoint {
 						remote-endpoint = <&etm0_out_port>;
 					};
@@ -430,14 +487,14 @@
 				status = "disabled";
 			};
 
-			iomuxc_lpsr: iomuxc-lpsr@302c0000 {
+			iomuxc_lpsr: pinctrl@302c0000 {
 				compatible = "fsl,imx7d-iomuxc-lpsr";
 				reg = <0x302c0000 0x10000>;
 				fsl,input-sel = <&iomuxc>;
 			};
 
 			gpt1: timer@302d0000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				compatible = "fsl,imx7d-gpt", "fsl,imx6dl-gpt";
 				reg = <0x302d0000 0x10000>;
 				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX7D_GPT1_ROOT_CLK>,
@@ -446,7 +503,7 @@
 			};
 
 			gpt2: timer@302e0000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				compatible = "fsl,imx7d-gpt", "fsl,imx6dl-gpt";
 				reg = <0x302e0000 0x10000>;
 				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX7D_GPT2_ROOT_CLK>,
@@ -456,7 +513,7 @@
 			};
 
 			gpt3: timer@302f0000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				compatible = "fsl,imx7d-gpt", "fsl,imx6dl-gpt";
 				reg = <0x302f0000 0x10000>;
 				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX7D_GPT3_ROOT_CLK>,
@@ -466,7 +523,7 @@
 			};
 
 			gpt4: timer@30300000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				compatible = "fsl,imx7d-gpt", "fsl,imx6dl-gpt";
 				reg = <0x30300000 0x10000>;
 				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX7D_GPT4_ROOT_CLK>,
@@ -496,37 +553,9 @@
 
 				mux: mux-controller {
 					compatible = "mmio-mux";
-					#mux-control-cells = <0>;
+					#mux-control-cells = <1>;
 					mux-reg-masks = <0x14 0x00000010>;
 				};
-
-				video_mux: csi-mux {
-					compatible = "video-mux";
-					mux-controls = <&mux 0>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-					status = "disabled";
-
-					port@0 {
-						reg = <0>;
-					};
-
-					port@1 {
-						reg = <1>;
-
-						csi_mux_from_mipi_vc0: endpoint {
-							remote-endpoint = <&mipi_vc0_to_csi_mux>;
-						};
-					};
-
-					port@2 {
-						reg = <2>;
-
-						csi_mux_to_csi: endpoint {
-							remote-endpoint = <&csi_from_csi_mux>;
-						};
-					};
-				};
 			};
 
 			ocotp: efuse@30350000 {
@@ -588,6 +617,7 @@
 					nvmem-cells = <&tempmon_calib>,	<&fuse_grade>;
 					nvmem-cell-names = "calib", "temp_grade";
 					clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>;
+					#thermal-sensor-cells = <0>;
 				};
 			};
 
@@ -605,6 +635,15 @@
 					clock-names = "snvs-rtc";
 				};
 
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					value = <0x60>;
+					mask = <0x60>;
+					status = "disabled";
+				};
+
 				snvs_pwrkey: snvs-powerkey {
 					compatible = "fsl,sec-v4.0-pwrkey";
 					regmap = <&snvs>;
@@ -641,7 +680,6 @@
 				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <3>;
 				interrupt-parent = <&intc>;
-				#power-domain-cells = <1>;
 
 				pgc {
 					#address-cells = <1>;
@@ -704,6 +742,8 @@
 				clocks = <&clks IMX7D_ECSPI4_ROOT_CLK>,
 					<&clks IMX7D_ECSPI4_ROOT_CLK>;
 				clock-names = "ipg", "per";
+				dma-names = "rx", "tx";
+				dmas = <&sdma 6 7 1>, <&sdma 7 7 2>;
 				status = "disabled";
 			};
 
@@ -783,10 +823,8 @@
 				compatible = "fsl,imx7-csi";
 				reg = <0x30710000 0x10000>;
 				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					 <&clks IMX7D_CSI_MCLK_ROOT_CLK>,
-					 <&clks IMX7D_CLK_DUMMY>;
-				clock-names = "axi", "mclk", "dcic";
+				clocks = <&clks IMX7D_CSI_MCLK_ROOT_CLK>;
+				clock-names = "mclk";
 				status = "disabled";
 
 				port {
@@ -797,7 +835,7 @@
 			};
 
 			lcdif: lcdif@30730000 {
-				compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif";
+				compatible = "fsl,imx7d-lcdif", "fsl,imx6sx-lcdif";
 				reg = <0x30730000 0x10000>;
 				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>,
@@ -809,8 +847,6 @@
 			mipi_csi: mipi-csi@30750000 {
 				compatible = "fsl,imx7-mipi-csi2";
 				reg = <0x30750000 0x10000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX7D_IPG_ROOT_CLK>,
 					 <&clks IMX7D_MIPI_CSI_ROOT_CLK>,
@@ -819,21 +855,45 @@
 				power-domains = <&pgc_mipi_phy>;
 				phy-supply = <&reg_1p0d>;
 				resets = <&src IMX7_RESET_MIPI_PHY_MRST>;
-				reset-names = "mrst";
 				status = "disabled";
 
-				port@0 {
-					reg = <0>;
-				};
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
 
-				port@1 {
-					reg = <1>;
+					port@0 {
+						reg = <0>;
+					};
+
+					port@1 {
+						reg = <1>;
 
-					mipi_vc0_to_csi_mux: endpoint {
-						remote-endpoint = <&csi_mux_from_mipi_vc0>;
+						mipi_vc0_to_csi_mux: endpoint {
+							remote-endpoint = <&csi_mux_from_mipi_vc0>;
+						};
 					};
 				};
 			};
+
+			mipi_dsi: dsi@30760000 {
+				compatible = "fsl,imx7d-mipi-dsim", "fsl,imx8mm-mipi-dsim";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30760000 0x400>;
+				clocks = <&clks IMX7D_MIPI_DSI_ROOT_CLK>,
+					 <&clks IMX7D_MIPI_DPHY_ROOT_CLK>;
+				clock-names = "bus_clk", "sclk_mipi";
+				assigned-clocks = <&clks IMX7D_MIPI_DSI_ROOT_SRC>,
+						  <&clks IMX7D_PLL_SYS_PFD5_CLK>;
+				assigned-clock-parents = <&clks IMX7D_PLL_SYS_PFD5_CLK>;
+				assigned-clock-rates = <0>, <333000000>;
+				power-domains = <&pgc_mipi_phy>;
+				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+				samsung,burst-clock-frequency = <891000000>;
+				samsung,esc-clock-frequency = <20000000>;
+				samsung,pll-clock-frequency = <24000000>;
+				status = "disabled";
+			};
 		};
 
 		aips3: bus@30800000 {
@@ -859,6 +919,8 @@
 					clocks = <&clks IMX7D_ECSPI1_ROOT_CLK>,
 						<&clks IMX7D_ECSPI1_ROOT_CLK>;
 					clock-names = "ipg", "per";
+					dma-names = "rx", "tx";
+					dmas = <&sdma 0 7 1>, <&sdma 1 7 2>;
 					status = "disabled";
 				};
 
@@ -871,6 +933,8 @@
 					clocks = <&clks IMX7D_ECSPI2_ROOT_CLK>,
 						<&clks IMX7D_ECSPI2_ROOT_CLK>;
 					clock-names = "ipg", "per";
+					dma-names = "rx", "tx";
+					dmas = <&sdma 2 7 1>, <&sdma 3 7 2>;
 					status = "disabled";
 				};
 
@@ -883,6 +947,8 @@
 					clocks = <&clks IMX7D_ECSPI3_ROOT_CLK>,
 						<&clks IMX7D_ECSPI3_ROOT_CLK>;
 					clock-names = "ipg", "per";
+					dma-names = "rx", "tx";
+					dmas = <&sdma 4 7 1>, <&sdma 5 7 2>;
 					status = "disabled";
 				};
 
@@ -1135,7 +1201,6 @@
 				compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
 				reg = <0x30b30000 0x200>;
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-				power-domains = <&pgc_hsic_phy>;
 				clocks = <&clks IMX7D_USB_CTRL_CLK>;
 				fsl,usbphy = <&usbphynop3>;
 				fsl,usbmisc = <&usbmisc3 0>;
@@ -1166,6 +1231,8 @@
 					<&clks IMX7D_USDHC1_ROOT_CLK>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
 				status = "disabled";
 			};
 
@@ -1178,6 +1245,8 @@
 					<&clks IMX7D_USDHC2_ROOT_CLK>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
 				status = "disabled";
 			};
 
@@ -1190,6 +1259,8 @@
 					<&clks IMX7D_USDHC3_ROOT_CLK>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
 				status = "disabled";
 			};
 
@@ -1206,7 +1277,7 @@
 				status = "disabled";
 			};
 
-			sdma: sdma@30bd0000 {
+			sdma: dma-controller@30bd0000 {
 				compatible = "fsl,imx7d-sdma", "fsl,imx35-sdma";
 				reg = <0x30bd0000 0x10000>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
@@ -1239,23 +1310,22 @@
 			};
 		};
 
-		dma_apbh: dma-apbh@33000000 {
+		dma_apbh: dma-controller@33000000 {
 			compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh";
 			reg = <0x33000000 0x2000>;
 			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
 			#dma-cells = <1>;
 			dma-channels = <4>;
 			clocks = <&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>;
 		};
 
-		gpmi: nand-controller@33002000{
+		gpmi: nand-controller@33002000 {
 			compatible = "fsl,imx7d-gpmi-nand";
 			#address-cells = <1>;
-			#size-cells = <1>;
+			#size-cells = <0>;
 			reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
 			reg-names = "gpmi-nand", "bch";
 			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/imx7ulp-com.dts b/arch/arm/boot/dts/nxp/imx/imx7ulp-com.dts
index d76fea3b35c6..d76fea3b35c6 100644
--- a/arch/arm/boot/dts/imx7ulp-com.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7ulp-com.dts
diff --git a/arch/arm/boot/dts/imx7ulp-evk.dts b/arch/arm/boot/dts/nxp/imx/imx7ulp-evk.dts
index eff51e113db4..88d7dc005fa0 100644
--- a/arch/arm/boot/dts/imx7ulp-evk.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7ulp-evk.dts
@@ -92,7 +92,6 @@
 			IMX7ULP_PAD_PTC3__LPUART4_RX	0x3
 			IMX7ULP_PAD_PTC2__LPUART4_TX	0x3
 		>;
-		bias-pull-up;
 	};
 
 	pinctrl_pwm0: pwm0grp {
diff --git a/arch/arm/boot/dts/imx7ulp-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imx7ulp-pinfunc.h
index c0148d79b62d..c0148d79b62d 100644
--- a/arch/arm/boot/dts/imx7ulp-pinfunc.h
+++ b/arch/arm/boot/dts/nxp/imx/imx7ulp-pinfunc.h
diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi
index b7ea37ad4e55..880b9a4f32b0 100644
--- a/arch/arm/boot/dts/imx7ulp.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi
@@ -189,7 +189,7 @@
 		};
 
 		usbotg1: usb@40330000 {
-			compatible = "fsl,imx7ulp-usb", "fsl,imx6ul-usb";
+			compatible = "fsl,imx7ulp-usb", "fsl,imx6ul-usb", "fsl,imx27-usb";
 			reg = <0x40330000 0x200>;
 			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&pcc2 IMX7ULP_CLK_USB0>;
@@ -202,21 +202,23 @@
 		};
 
 		usbmisc1: usbmisc@40330200 {
-			compatible = "fsl,imx7ulp-usbmisc", "fsl,imx7d-usbmisc";
+			compatible = "fsl,imx7ulp-usbmisc", "fsl,imx7d-usbmisc",
+				     "fsl,imx6q-usbmisc";
 			#index-cells = <1>;
 			reg = <0x40330200 0x200>;
 		};
 
 		usbphy1: usb-phy@40350000 {
-			compatible = "fsl,imx7ulp-usbphy", "fsl,imx6ul-usbphy";
+			compatible = "fsl,imx7ulp-usbphy";
 			reg = <0x40350000 0x1000>;
 			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&pcc2 IMX7ULP_CLK_USB_PHY>;
 			#phy-cells = <0>;
+			nxp,sim = <&sim>;
 		};
 
 		usdhc0: mmc@40370000 {
-			compatible = "fsl,imx7ulp-usdhc", "fsl,imx6sx-usdhc";
+			compatible = "fsl,imx7ulp-usdhc";
 			reg = <0x40370000 0x10000>;
 			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
@@ -230,7 +232,7 @@
 		};
 
 		usdhc1: mmc@40380000 {
-			compatible = "fsl,imx7ulp-usdhc", "fsl,imx6sx-usdhc";
+			compatible = "fsl,imx7ulp-usdhc";
 			reg = <0x40380000 0x10000>;
 			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
@@ -259,7 +261,7 @@
 			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
 			assigned-clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
-			assigned-clocks-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>;
+			assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>;
 			timeout-sec = <40>;
 		};
 
@@ -328,8 +330,9 @@
 			compatible = "fsl,imx7ulp-lpi2c";
 			reg = <0x40a40000 0x10000>;
 			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&pcc3 IMX7ULP_CLK_LPI2C6>;
-			clock-names = "ipg";
+			clocks = <&pcc3 IMX7ULP_CLK_LPI2C6>,
+				 <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>;
+			clock-names = "per", "ipg";
 			assigned-clocks = <&pcc3 IMX7ULP_CLK_LPI2C6>;
 			assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>;
 			assigned-clock-rates = <48000000>;
@@ -340,8 +343,9 @@
 			compatible = "fsl,imx7ulp-lpi2c";
 			reg = <0x40a50000 0x10000>;
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&pcc3 IMX7ULP_CLK_LPI2C7>;
-			clock-names = "ipg";
+			clocks = <&pcc3 IMX7ULP_CLK_LPI2C7>,
+				 <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>;
+			clock-names = "per", "ipg";
 			assigned-clocks = <&pcc3 IMX7ULP_CLK_LPI2C7>;
 			assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>;
 			assigned-clock-rates = <48000000>;
@@ -395,6 +399,7 @@
 				 <&pcc3 IMX7ULP_CLK_PCTLC>;
 			clock-names = "gpio", "port";
 			gpio-ranges = <&iomuxc1 0 0 20>;
+			ngpios = <20>;
 		};
 
 		gpio_ptd: gpio@40af0000 {
@@ -409,6 +414,7 @@
 				 <&pcc3 IMX7ULP_CLK_PCTLD>;
 			clock-names = "gpio", "port";
 			gpio-ranges = <&iomuxc1 0 32 12>;
+			ngpios = <12>;
 		};
 
 		gpio_pte: gpio@40b00000 {
@@ -423,6 +429,7 @@
 				 <&pcc3 IMX7ULP_CLK_PCTLE>;
 			clock-names = "gpio", "port";
 			gpio-ranges = <&iomuxc1 0 64 16>;
+			ngpios = <16>;
 		};
 
 		gpio_ptf: gpio@40b10000 {
@@ -437,6 +444,7 @@
 				 <&pcc3 IMX7ULP_CLK_PCTLF>;
 			clock-names = "gpio", "port";
 			gpio-ranges = <&iomuxc1 0 96 20>;
+			ngpios = <20>;
 		};
 	};
 
@@ -456,6 +464,8 @@
 			compatible = "fsl,imx7ulp-ocotp", "syscon";
 			reg = <0x410a6000 0x4000>;
 			clocks = <&scg1 IMX7ULP_CLK_DUMMY>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/nxp/imx/imxrt1050-evk.dts b/arch/arm/boot/dts/nxp/imx/imxrt1050-evk.dts
new file mode 100644
index 000000000000..6a9c10decf52
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imxrt1050-evk.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019
+ * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
+ */
+
+/dts-v1/;
+#include "imxrt1050.dtsi"
+#include "imxrt1050-pinfunc.h"
+
+/ {
+	model = "NXP IMXRT1050-evk board";
+	compatible = "fsl,imxrt1050-evk", "fsl,imxrt1050";
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	aliases {
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		mmc0 = &usdhc1;
+		serial0 = &lpuart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x2000000>;
+	};
+};
+
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart1>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl_lpuart1: lpuart1grp {
+		fsl,pins = <
+			MXRT1050_IOMUXC_GPIO_AD_B0_12_LPUART1_TXD	0xf1
+			MXRT1050_IOMUXC_GPIO_AD_B0_13_LPUART1_RXD	0xf1
+		>;
+	};
+
+	pinctrl_usdhc0: usdhc0grp {
+		fsl,pins = <
+			MXRT1050_IOMUXC_GPIO_B1_12_USDHC1_CD_B		0x1B000
+			MXRT1050_IOMUXC_GPIO_B1_14_USDHC1_VSELECT	0xB069
+			MXRT1050_IOMUXC_GPIO_SD_B0_00_USDHC1_CMD	0x17061
+			MXRT1050_IOMUXC_GPIO_SD_B0_01_USDHC1_CLK	0x17061
+			MXRT1050_IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3	0x17061
+			MXRT1050_IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2	0x17061
+			MXRT1050_IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1	0x17061
+			MXRT1050_IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0	0x17061
+		>;
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc0>;
+	pinctrl-1 = <&pinctrl_usdhc0>;
+	pinctrl-2 = <&pinctrl_usdhc0>;
+	pinctrl-3 = <&pinctrl_usdhc0>;
+	cd-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imxrt1050-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imxrt1050-pinfunc.h
new file mode 100644
index 000000000000..22c14a3262ad
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imxrt1050-pinfunc.h
@@ -0,0 +1,993 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (C) 2019
+ * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_IMXRT1050_PINFUNC_H
+#define _DT_BINDINGS_PINCTRL_IMXRT1050_PINFUNC_H
+
+#define IMX_PAD_SION	0x40000000
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+
+#define MXRT1050_IOMUXC_GPIO_EMC_00_SEMC_DA00				0x014 0x204 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_00_FLEXPWM4_PWM0_A			0x014 0x204 0x494 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_00_LPSPI2_SCK				0x014 0x204 0x500 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_00_XBAR_INOUT2				0x014 0x204 0x60C 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_00_FLEXIO1_D00				0x014 0x204 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_00_GPIO4_IO00				0x014 0x204 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_01_SEMC_DA01				0x018 0x208 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_01_FLEXPWM4_PWM0_B			0x018 0x208 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_01_LPSPI2_PCS0				0x018 0x208 0x4FC 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_01_XBAR_INOUT3				0x018 0x208 0x610 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_01_FLEXIO1_D01				0x018 0x208 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_01_GPIO4_IO01				0x018 0x208 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_02_SEMC_DA02				0x01C 0x20C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_02_FLEXPWM4_PWM1_A			0x01C 0x20C 0x498 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_02_LPSPI2_SDO				0x01C 0x20C 0x508 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_02_XBAR_INOUT4				0x01C 0x20C 0x614 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_02_FLEXIO1_D02				0x01C 0x20C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_02_GPIO4_IO02				0x01C 0x20C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_03_SEMC_DA03				0x020 0x210 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_03_FLEXPWM4_PWM1_B			0x020 0x210 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_03_LPSPI2_SDI				0x020 0x210 0x504 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_03_XBAR_INOUT5				0x020 0x210 0x618 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_03_FLEXIO1_D03				0x020 0x210 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_03_GPIO4_IO03				0x020 0x210 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_04_SEMC_DA04				0x024 0x214 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_04_FLEXPWM4_PWM2_A			0x024 0x214 0x49C 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_04_SAI2_TX_DATA			0x024 0x214 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_04_XBAR_INOUT6				0x024 0x214 0x61C 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_04_FLEXIO1_D04				0x024 0x214 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_04_GPIO4_IO04				0x024 0x214 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_05_SEMC_DA05				0x028 0x218 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_05_FLEXPWM4_PWM2_B			0x028 0x218 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_05_SAI2_TX_SYNC			0x028 0x218 0x5C4 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_05_XBAR_INOUT7				0x028 0x218 0x620 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_05_FLEXIO1_D05				0x028 0x218 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_05_GPIO4_IO05				0x028 0x218 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_06_SEMC_DA06				0x02C 0x21C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_06_FLEXPWM2_PWM0_A			0x02C 0x21C 0x478 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_06_SAI2_TX_BCLK			0x02C 0x21C 0x5C0 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_06_XBAR_INOUT8				0x02C 0x21C 0x624 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_06_FLEXIO1_D06				0x02C 0x21C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_06_GPIO4_IO06				0x02C 0x21C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_07_SEMC_DA07				0x030 0x220 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_07_FLEXPWM2_PWM0_B			0x030 0x220 0x488 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_07_SAI2_MCLK				0x030 0x220 0x5B0 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_07_XBAR_INOUT9				0x030 0x220 0x628 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_07_FLEXIO1_D07				0x030 0x220 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_07_GPIO4_IO07				0x030 0x220 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_08_SEMC_DM00				0x034 0x224 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_08_FLEXPWM2_PWM1_A			0x034 0x224 0x47C 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_08_SAI2_RX_DATA			0x034 0x224 0x5B8 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_08_XBAR_INOUT17			0x034 0x224 0x62C 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_08_FLEXIO1_D08				0x034 0x224 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_08_GPIO4_IO08				0x034 0x224 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_09_SEMC_ADDR00				0x038 0x228 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_09_FLEXPWM2_PWM1_B			0x038 0x228 0x48C 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_09_SAI2_RX_SYNC			0x038 0x228 0x5BC 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_09_FLEXCAN2_TX				0x038 0x228 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_09_FLEXIO1_D09				0x038 0x228 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_09_GPIO4_IO09				0x038 0x228 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_10_SEMC_ADDR01				0x03C 0x22C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_10_FLEXPWM2_PWM2_A			0x03C 0x22C 0x480 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_10_SAI2_RX_BCLK			0x03C 0x22C 0x5B4 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_10_FLEXCAN2_RX				0x03C 0x22C 0x450 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_10_FLEXIO1_D10				0x03C 0x22C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_10_GPIO4_IO10				0x03C 0x22C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_11_SEMC_ADDR02				0x040 0x230 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_11_FLEXPWM2_PWM2_B			0x040 0x230 0x490 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_11_LPI2C4_SDA				0x040 0x230 0x4E8 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_11_USDHC2_RESET_B			0x040 0x230 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_11_FLEXIO1_D11				0x040 0x230 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_11_GPIO4_IO11				0x040 0x230 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_12_SEMC_ADDR03				0x044 0x234 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_12_XBAR_INOUT24			0x044 0x234 0x640 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_12_LPI2C4_SCL				0x044 0x234 0x4E4 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_12_USDHC2_WP				0x044 0x234 0x5D8 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_12_FLEXPWM1_PWM3_A			0x044 0x234 0x454 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_12_GPIO4_IO12				0x044 0x234 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_13_SEMC_ADDR04				0x048 0x238 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_13_XBAR_INOUT25			0x048 0x238 0x650 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_13_LPUART3_TXD				0x048 0x238 0x53C 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_13_MQS_RIGHT				0x048 0x238 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_13_FLEXPWM1_PWM3_B			0x048 0x238 0x464 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_13_GPIO4_IO13				0x048 0x238 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_14_SEMC_ADDR05				0x04C 0x23C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_14_XBAR_INOUT19			0x04C 0x23C 0x654 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_14_LPUART3_RXD				0x04C 0x23C 0x538 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_14_MQS_LEFT				0x04C 0x23C 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_14_LPSPI2_PCS1				0x04C 0x23C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_14_GPIO4_IO14				0x04C 0x23C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_15_SEMC_ADDR06				0x050 0x240 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_15_XBAR_INOUT20			0x050 0x240 0x634 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_15_LPUART3_CTS_B			0x050 0x240 0x534 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_15_SPDIF_OUT				0x050 0x240 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_15_TMR3_TIMER0				0x050 0x240 0x57C 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_15_GPIO4_IO15				0x050 0x240 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_16_SEMC_ADDR07				0x054 0x244 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_16_XBAR_INOUT21			0x054 0x244 0x658 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_16_LPUART3_RTS_B			0x054 0x244 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_16_SPDIF_IN				0x054 0x244 0x5C8 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_16_TMR3_TIMER1				0x054 0x244 0x580 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_16_GPIO4_IO16				0x054 0x244 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_17_SEMC_ADDR08				0x058 0x248 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_17_FLEXPWM4_PWM3_A			0x058 0x248 0x4A0 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_17_LPUART4_CTS_B			0x058 0x248 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_17_FLEXCAN1_TX				0x058 0x248 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_17_TMR3_TIMER2				0x058 0x248 0x584 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_17_GPIO4_IO17				0x058 0x248 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_18_SEMC_ADDR09				0x05C 0x24C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_18_FLEXPWM4_PWM3_B			0x05C 0x24C 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_18_LPUART4_RTS_B			0x05C 0x24C 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_18_FLEXCAN1_RX				0x05C 0x24C 0x44C 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_18_TMR3_TIMER3				0x05C 0x24C 0x588 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_18_GPIO4_IO18				0x05C 0x24C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_18_SNVS_VIO_5_CTL			0x05C 0x24C 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_19_SEMC_ADDR11				0x060 0x250 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_19_FLEXPWM2_PWM3_A			0x060 0x250 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_19_LPUART4_TXD				0x060 0x250 0x544 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_19_ENET_RX_DATA01			0x060 0x250 0x438 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_19_TMR2_TIMER0				0x060 0x250 0x56C 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_19_GPIO4_IO19				0x060 0x250 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_19_SNVS_VIO_5				0x060 0x250 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_20_SEMC_ADDR12				0x064 0x254 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_20_FLEXPWM2_PWM3_B			0x064 0x254 0x484 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_20_LPUART4_RXD				0x064 0x254 0x540 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_20_ENET_RX_DATA00			0x064 0x254 0x434 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_20_TMR2_TIMER0				0x064 0x254 0x570 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_20_GPIO4_IO20				0x064 0x254 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_21_SEMC_BA0				0x068 0x258 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_21_FLEXPWM3_PWM3_A			0x068 0x258 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_21_LPI2C3_SDA				0x068 0x258 0x4E0 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_21_ENET_TX_DATA01			0x068 0x258 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_21_TMR2_TIMER2				0x068 0x258 0x574 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_21_GPIO4_IO21				0x068 0x258 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_22_SEMC_BA1				0x06C 0x25C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_22_FLEXPWM3_PWM3_B			0x06C 0x25C 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_22_LPI2C3_SCL				0x06C 0x25C 0x4DC 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_22_ENET_TX_DATA00			0x06C 0x25C 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_22_TMR2_TIMER3				0x06C 0x25C 0x578 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_22_GPIO4_IO22				0x06C 0x25C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_23_SEMC_ADDR10				0x070 0x260 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_23_FLEXPWM1_PWM0_A			0x070 0x260 0x458 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_23_LPUART5_TXD				0x070 0x260 0x54C 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_23_ENET_RX_EN				0x070 0x260 0x43C 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_23_GPT1_CAPTURE2			0x070 0x260 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_23_GPIO4_IO23				0x070 0x260 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_24_SEMC_CAS				0x074 0x264 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_24_FLEXPWM1_PWM0_B			0x074 0x264 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_24_LPUART5_RXD				0x074 0x264 0x548 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_24_ENET_TX_EN				0x074 0x264 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_24_GPT1_CAPTURE1			0x074 0x264 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_24_GPIO4_IO24				0x074 0x264 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_25_SEMC_RAS				0x078 0x268 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_25_FLEXPWM1_PWM1_A			0x078 0x268 0x45C 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_25_LPUART6_TXD				0x078 0x268 0x554 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_25_ENET_TX_CLK				0x078 0x268 0x448 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_25_ENET_REF_CLK			0x078 0x268 0x42C 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_25_GPIO4_IO25				0x078 0x268 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_26_SEMC_CLK				0x07C 0x26C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_26_FLEXPWM1_PWM1_B			0x07C 0x26C 0x46C 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_26_LPUART6_RXD				0x07C 0x26C 0x550 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_26_ENET_RX_ER				0x07C 0x26C 0x440 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_26_FLEXIO1_D12				0x07C 0x26C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_26_GPIO4_IO26				0x07C 0x26C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_27_SEMC_CKE				0x080 0x270 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_27_FLEXPWM1_PWM2_A			0x080 0x270 0x460 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_27_LPUART5_RTS_B			0x080 0x270 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_27_LPSPI1_SCK				0x080 0x270 0x4F0 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_27_FLEXIO1_D13				0x080 0x270 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_27_GPIO4_IO27				0x080 0x270 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_28_SEMC_WE				0x084 0x274 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_28_FLEXPWM1_PWM2_B			0x084 0x274 0x470 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_28_LPUART5_CTS_B			0x084 0x274 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_28_LPSPI1_SDO				0x084 0x274 0x4F8 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_28_FLEXIO1_D14				0x084 0x274 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_28_GPIO4_IO28				0x084 0x274 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_29_SEMC_CS0				0x088 0x278 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_29_FLEXPWM3_PWM0_A			0x088 0x278 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_29_LPUART6_RTS_B			0x088 0x278 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_29_LPSPI1_SDI				0x088 0x278 0x4F4 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_29_FLEXIO1_D15				0x088 0x278 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_29_GPIO4_IO29				0x088 0x278 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_30_SEMC_DA08				0x08C 0x27C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_30_FLEXPWM3_PWM0_B			0x08C 0x27C 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_30_LPUART6_CTS_B			0x08C 0x27C 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_30_LPSPI1_PCS0				0x08C 0x27C 0x4EC 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_30_CSI_DATA23				0x08C 0x27C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_30_GPIO4_IO30				0x08C 0x27C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_31_SEMC_DA09				0x090 0x280 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_31_FLEXPWM3_PWM1_A			0x090 0x280 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_31_LPUART7_TXD				0x090 0x280 0x55C 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_31_LPSPI1_PCS1				0x090 0x280 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_31_CSI_DATA22				0x090 0x280 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_31_GPIO4_IO31				0x090 0x280 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_32_SEMC_DA10				0x094 0x284 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_32_FLEXPWM3_PWM1_B			0x094 0x284 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_32_LPUART7_RXD				0x094 0x284 0x558 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_32_CCM_PMIC_READY			0x094 0x284 0x3FC 0x3 0x4
+#define MXRT1050_IOMUXC_GPIO_EMC_32_CSI_DATA21				0x094 0x284 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_32_GPIO3_IO18				0x094 0x284 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_33_SEMC_DA11				0x098 0x288 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_33_FLEXPWM3_PWM2_A			0x098 0x288 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_33_USDHC1_RESET_B			0x098 0x288 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_33_SAI3_RX_DATA			0x098 0x288 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_33_CSI_DATA20				0x098 0x288 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_33_GPIO3_IO19				0x098 0x288 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_34_SEMC_DA12				0x09C 0x28C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_34_FLEXPWM3_PWM2_B			0x09C 0x28C 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_34_USDHC1_VSELECT			0x09C 0x28C 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_34_SAI3_RX_SYNC			0x09C 0x28C 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_34_CSI_DATA19				0x09C 0x28C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_34_GPIO3_IO20				0x09C 0x28C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_35_SEMC_DA13				0x0A0 0x290 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_35_XBAR_INOUT18			0x0A0 0x290 0x630 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_35_GPT1_COMPARE1			0x0A0 0x290 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_35_SAI3_RX_BCLK			0x0A0 0x290 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_35_CSI_DATA18				0x0A0 0x290 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_35_GPIO3_IO21				0x0A0 0x290 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_35_USDHC1_CD_B				0x0A0 0x290 0x5D4 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_36_SEMC_DA14				0x0A4 0x294 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_36_XBAR_INOUT22			0x0A4 0x294 0x638 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_36_GPT1_COMPARE2			0x0A4 0x294 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_36_SAI3_TX_DATA			0x0A4 0x294 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_36_CSI_DATA17				0x0A4 0x294 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_36_GPIO3_IO22				0x0A4 0x294 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_36_USDHC1_WP				0x0A4 0x294 0x5D8 0x6 0x1
+
+#define MXRT1050_IOMUXC_GPIO_EMC_37_SEMC_DA15				0x0A8 0x298 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_37_XBAR_INOUT23			0x0A8 0x298 0x63C 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_37_GPT1_COMPARE3			0x0A8 0x298 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_37_SAI3_MCLK				0x0A8 0x298 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_37_CSI_DATA16				0x0A8 0x298 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_37_GPIO3_IO23				0x0A8 0x298 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_37_USDHC2_WP				0x0A8 0x298 0x608 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_38_SEMC_DM01				0x0AC 0x29C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_38_FLEXPWM1_PWM3_A			0x0AC 0x29C 0x454 0x1 0x2
+#define MXRT1050_IOMUXC_GPIO_EMC_38_LPUART8_TXD				0x0AC 0x29C 0x564 0x2 0x2
+#define MXRT1050_IOMUXC_GPIO_EMC_38_SAI3_TX_BCLK			0x0AC 0x29C 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_38_CSI_FIELD				0x0AC 0x29C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_38_GPIO3_IO24				0x0AC 0x29C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_38_USDHC2_VSELECT			0x0AC 0x29C 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_39_SEMC_DQS				0x0B0 0x2A0 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_39_FLEXPWM1_PWM3_B			0x0B0 0x2A0 0x464 0x1 0x2
+#define MXRT1050_IOMUXC_GPIO_EMC_39_LPUART8_RXD				0x0B0 0x2A0 0x560 0x2 0x2
+#define MXRT1050_IOMUXC_GPIO_EMC_39_SAI3_TX_SYNC			0x0B0 0x2A0 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_39_WDOG1_B				0x0B0 0x2A0 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_39_GPIO3_IO25				0x0B0 0x2A0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_39_USDHC2_CD_B				0x0B0 0x2A0 0x5E0 0x6 0x1
+
+#define MXRT1050_IOMUXC_GPIO_EMC_40_SEMC_RDY				0x0B4 0x2A4 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_40_GPT2_CAPTURE2			0x0B4 0x2A4 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_40_LPSPI1_PCS2				0x0B4 0x2A4 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_40_USB_OTG2_OC				0x0B4 0x2A4 0x5CC 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_40_ENET_MDC				0x0B4 0x2A4 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_40_GPIO3_IO26				0x0B4 0x2A4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_40_USDHC2_RESET_B			0x0B4 0x2A4 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_41_SEMC_CSX0				0x0B8 0x2A8 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_41_GPT2_CAPTURE1			0x0B8 0x2A8 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_41_LPSPI1_PCS3				0x0B8 0x2A8 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_41_USB_OTG2_PWR			0x0B8 0x2A8 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_41_ENET_MDIO				0x0B8 0x2A8 0x430 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_41_GPIO3_IO27				0x0B8 0x2A8 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_41_USDHC2_VSELECT			0x0B8 0x2A8 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_00_FLEXPWM2_PWM3_A			0x0BC 0x2AC 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_00_XBAR_INOUT14			0x0BC 0x2AC 0x644 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_00_REF_CLK_32K			0x0BC 0x2AC 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_00_USB_OTG2_ID			0x0BC 0x2AC 0x3F8 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_00_LPI2C1_SCLS			0x0BC 0x2AC 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_00_GPIO1_IO00			0x0BC 0x2AC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_00_USDHC1_RESET_B			0x0BC 0x2AC 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_00_LPSPI3_SCK			0x0BC 0x2AC 0x510 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_01_FLEXPWM2_PWM3_B			0x0C0 0x2B0 0x484 0x0 0x2
+#define MXRT1050_IOMUXC_GPIO_AD_B0_01_XBAR_INOUT15			0x0C0 0x2B0 0x648 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_01_REF_CLK_24M			0x0C0 0x2B0 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_01_USB_OTG1_ID			0x0C0 0x2B0 0x3F4 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_01_LPI2C1_SDAS			0x0C0 0x2B0 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_01_GPIO1_IO01			0x0C0 0x2B0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_01_EWM_OUT_B				0x0C0 0x2B0 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_01_LPSPI3_SDO			0x0C0 0x2B0 0x518 0x7 0x1
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_02_FLEXCAN2_TX			0x0C4 0x2B4 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_02_XBAR_INOUT16			0x0C4 0x2B4 0x64C 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_02_LPUART6_TXD			0x0C4 0x2B4 0x554 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_02_USB_OTG1_PWR			0x0C4 0x2B4 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_02_FLEXPWM1_PWM0_X			0x0C4 0x2B4 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_02_GPIO1_IO02			0x0C4 0x2B4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_02_LPI2C1_HREQ			0x0C4 0x2B4 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_02_LPSPI3_SDI			0x0C4 0x2B4 0x514 0x7 0x1
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_03_FLEXCAN2_RX			0x0C8 0x2B8 0x450 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_03_XBAR_INOUT17			0x0C8 0x2B8 0x62C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_03_LPUART6_RXD			0x0C8 0x2B8 0x550 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_03_USB_OTG1_OC			0x0C8 0x2B8 0x5D0 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_03_FLEXPWM1_PWM1_X			0x0C8 0x2B8 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_03_GPIO1_IO03			0x0C8 0x2B8 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_03_REF_CLK_24M			0x0C8 0x2B8 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_03_LPSPI3_PCS0			0x0C8 0x2B8 0x50C 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_04_SRC_BOOT_MODE00			0x0CC 0x2BC 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_04_MQS_RIGHT				0x0CC 0x2BC 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_04_ENET_TX_DATA03			0x0CC 0x2BC 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_04_SAI2_TX_SYNC			0x0CC 0x2BC 0x5C4 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_04_CSI_DATA09			0x0CC 0x2BC 0x41C 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_04_GPIO1_IO04			0x0CC 0x2BC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_04_PIT_TRIGGER00			0x0CC 0x2BC 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_04_LPSPI3_PCS1			0x0CC 0x2BC 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_05_SRC_BOOT_MODE01			0x0D0 0x2C0 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_05_MQS_LEFT				0x0D0 0x2C0 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_05_ENET_TX_DATA02			0x0D0 0x2C0 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_05_SAI2_TX_BCLK			0x0D0 0x2C0 0x5C0 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_05_CSI_DATA08			0x0D0 0x2C0 0x418 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_05_GPIO1_IO05			0x0D0 0x2C0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_05_XBAR_INOUT17			0x0D0 0x2C0 0x62C 0x6 0x2
+#define MXRT1050_IOMUXC_GPIO_AD_B0_05_LPSPI3_PCS2			0x0D0 0x2C0 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_06_JTAG_TMS				0x0D4 0x2C4 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_06_GPT2_COMPARE1			0x0D4 0x2C4 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_06_ENET_RX_CLK			0x0D4 0x2C4 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_06_SAI2_RX_BCLK			0x0D4 0x2C4 0x5B4 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_06_CSI_DATA07			0x0D4 0x2C4 0x414 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_06_GPIO1_IO06			0x0D4 0x2C4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_06_XBAR_INOUT18			0x0D4 0x2C4 0x630 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_06_LPSPI3_PCS3			0x0D4 0x2C4 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_07_JTAG_TCK				0x0D8 0x2C8 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_07_GPT2_COMPARE2			0x0D8 0x2C8 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_07_ENET_TX_ER			0x0D8 0x2C8 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_07_SAI2_RX_SYNC			0x0D8 0x2C8 0x5BC 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_07_CSI_DATA06			0x0D8 0x2C8 0x410 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_07_GPIO1_IO07			0x0D8 0x2C8 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_07_XBAR_INOUT19			0x0D8 0x2C8 0x654 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_07_ENET_1588_EVENT3_OUT		0x0D8 0x2C8 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_08_JTAG_MOD				0x0DC 0x2CC 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_08_GPT2_COMPARE3			0x0DC 0x2CC 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_08_ENET_RX_DATA03			0x0DC 0x2CC 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_08_SAI2_RX_DATA			0x0DC 0x2CC 0x5B8 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_08_CSI_DATA05			0x0DC 0x2CC 0x40C 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_08_GPIO1_IO08			0x0DC 0x2CC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_08_XBAR_INOUT20			0x0DC 0x2CC 0x634 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_08_ENET_1588_EVENT3_IN		0x0DC 0x2CC 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_09_JTAG_TDI				0x0E0 0x2D0 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_09_FLEXPWM2_PWM3_A			0x0E0 0x2D0 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_09_ENET_RX_DATA02			0x0E0 0x2D0 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_09_SAI2_TX_DATA			0x0E0 0x2D0 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_09_CSI_DATA04			0x0E0 0x2D0 0x408 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_09_GPIO1_IO09			0x0E0 0x2D0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_09_XBAR_INOUT21			0x0E0 0x2D0 0x658 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_09_GPT2_CLK				0x0E0 0x2D0 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_10_JTAG_TDO				0x0E4 0x2D4 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_10_FLEXPWM1_PWM3_A			0x0E4 0x2D4 0x454 0x1 0x3
+#define MXRT1050_IOMUXC_GPIO_AD_B0_10_ENET_CRS				0x0E4 0x2D4 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_10_SAI2_MCLK				0x0E4 0x2D4 0x5B0 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_10_CSI_DATA03			0x0E4 0x2D4 0x404 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_10_GPIO1_IO10			0x0E4 0x2D4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_10_XBAR_INOUT22			0x0E4 0x2D4 0x638 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_10_ENET_1588_EVENT0_OUT		0x0E4 0x2D4 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_11_JTAG_TRSTB			0x0E8 0x2D8 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_11_FLEXPWM1_PWM3_B			0x0E8 0x2D8 0x464 0x1 0x3
+#define MXRT1050_IOMUXC_GPIO_AD_B0_11_ENET_COL				0x0E8 0x2D8 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_11_WDOG1_B				0x0E8 0x2D8 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_11_CSI_DATA02			0x0E8 0x2D8 0x400 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_11_GPIO1_IO11			0x0E8 0x2D8 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_11_XBAR_INOUT23			0x0E8 0x2D8 0x63C 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_11_ENET_1588_EVENT0_IN		0x0E8 0x2D8 0x444 0x7 0x1
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_12_LPI2C4_SCL			0x0EC 0x2DC 0x4E4 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_12_CCM_PMIC_READY			0x0EC 0x2DC 0x3FC 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_12_LPUART1_TXD			0x0EC 0x2DC 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_12_WDOG2_B				0x0EC 0x2DC 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_12_FLEXPWM1_PWM2_X			0x0EC 0x2DC 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_12_GPIO1_IO12			0x0EC 0x2DC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_12_ENET_1588_EVENT1_OUT		0x0EC 0x2DC 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_12_NMI				0x0EC 0x2DC 0x568 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_13_LPI2C4_SDA			0x0F0 0x2E0 0x4E8 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_13_GPT1_CLK				0x0F0 0x2E0 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_13_LPUART1_RXD			0x0F0 0x2E0 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_13_EWM_OUT_B				0x0F0 0x2E0 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_13_FLEXPWM1_PWM3_X			0x0F0 0x2E0 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_13_GPIO1_IO13			0x0F0 0x2E0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_13_ENET_1588_EVENT1_IN		0x0F0 0x2E0 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_13_REF_CLK_24M			0x0F0 0x2E0 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_14_USB_OTG2_OC			0x0F4 0x2E4 0x5CC 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_14_XBAR_INOUT24			0x0F4 0x2E4 0x640 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_14_LPUART1_CTS_B			0x0F4 0x2E4 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_14_ENET_1588_EVENT0_OUT		0x0F4 0x2E4 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_14_CSI_VSYNC				0x0F4 0x2E4 0x428 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_14_GPIO1_IO14			0x0F4 0x2E4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_14_FLEXCAN2_TX			0x0F4 0x2E4 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_15_USB_OTG2_PWR			0x0F8 0x2E8 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_15_XBAR_INOUT25			0x0F8 0x2E8 0x650 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_15_LPUART1_RTS_B			0x0F8 0x2E8 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_15_ENET_1588_EVENT0_IN		0x0F8 0x2E8 0x444 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_15_CSI_HSYNC				0x0F8 0x2E8 0x420 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_15_GPIO1_IO15			0x0F8 0x2E8 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_15_FLEXCAN2_RX			0x0F8 0x2E8 0x450 0x6 0x2
+#define MXRT1050_IOMUXC_GPIO_AD_B0_15_WDOG1_WDOG_RST_B_DEB		0x0F8 0x2E8 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_00_USB_OTG2_ID			0x0FC 0x2EC 0x3F8 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_00_TMR3_TIMER0			0x0FC 0x2EC 0x57C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_00_LPUART2_CTS_B			0x0FC 0x2EC 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_00_LPI2C1_SCL			0x0FC 0x2EC 0x4CC 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_00_WDOG1_B				0x0FC 0x2EC 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_00_GPIO1_IO16			0x0FC 0x2EC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_00_USDHC1_WP				0x0FC 0x2EC 0x5D8 0x6 0x2
+#define MXRT1050_IOMUXC_GPIO_AD_B1_00_KPP_ROW07				0x0FC 0x2EC 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_01_USB_OTG1_PWR			0x100 0x2F0 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_01_TMR3_TIMER1			0x100 0x2F0 0x580 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_01_LPUART2_RTS_B			0x100 0x2F0 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_01_LPI2C1_SDA			0x100 0x2F0 0x4D0 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_01_CCM_PMIC_READY			0x100 0x2F0 0x3FC 0x4 0x2
+#define MXRT1050_IOMUXC_GPIO_AD_B1_01_GPIO1_IO17			0x100 0x2F0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_01_USDHC1_VSELECT			0x100 0x2F0 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_01_KPP_COL07				0x100 0x2F0 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_02_USB_OTG1_ID			0x104 0x2F4 0x3F4 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_02_TMR3_TIMER2			0x104 0x2F4 0x584 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_02_LPUART2_TXD			0x104 0x2F4 0x530 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_02_SPDIF_OUT				0x104 0x2F4 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_02_ENET_1588_EVENT2_OUT		0x104 0x2F4 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_02_GPIO1_IO18			0x104 0x2F4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_02_USDHC1_CD_B			0x104 0x2F4 0x5D4 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_02_KPP_ROW06				0x104 0x2F4 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_03_USB_OTG1_OC			0x108 0x2F8 0x5D0 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_03_TMR3_TIMER3			0x108 0x2F8 0x588 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_03_LPUART2_RXD			0x108 0x2F8 0x52C 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_03_SPDIF_IN				0x108 0x2F8 0x5C8 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_03_ENET_1588_EVENT2_IN		0x108 0x2F8 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_03_GPIO1_IO19			0x108 0x2F8 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_03_USDHC2_CD_B			0x108 0x2F8 0x5E0 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_03_KPP_COL06				0x108 0x2F8 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_04_FLEXSPI_B_DATA3			0x10C 0x2FC 0x4C4 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_04_ENET_MDC				0x10C 0x2FC 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_04_LPUART3_CTS_B			0x10C 0x2FC 0x534 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_04_SPDIF_SR_CLK			0x10C 0x2FC 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_04_CSI_PIXCLK			0x10C 0x2FC 0x424 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_04_GPIO1_IO20			0x10C 0x2FC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_04_USDHC2_DATA0			0x10C 0x2FC 0x5E8 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_04_KPP_ROW05				0x10C 0x2FC 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_05_FLEXSPI_B_DATA2			0x110 0x300 0x4C0 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_05_ENET_MDIO				0x110 0x300 0x430 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_05_LPUART3_RTS_B			0x110 0x300 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_05_SPDIF_OUT				0x110 0x300 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_05_CSI_MCLK				0x110 0x300 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_05_GPIO1_IO21			0x110 0x300 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_05_USDHC2_DATA1			0x110 0x300 0x5EC 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_05_KPP_COL05				0x110 0x300 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_06_FLEXSPI_B_DATA1			0x114 0x304 0x4BC 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_06_LPI2C3_SDA			0x114 0x304 0x4E0 0x1 0x2
+#define MXRT1050_IOMUXC_GPIO_AD_B1_06_LPUART3_TXD			0x114 0x304 0x53C 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_06_SPDIF_LOCK			0x114 0x304 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_06_CSI_VSYNC				0x114 0x304 0x428 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_06_GPIO1_IO22			0x114 0x304 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_06_USDHC2_DATA2			0x114 0x304 0x5F0 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_06_KPP_ROW04				0x114 0x304 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_07_FLEXSPI_B_DATA0			0x118 0x308 0x4B8 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_07_LPI2C3_SCL			0x118 0x308 0x4DC 0x1 0x2
+#define MXRT1050_IOMUXC_GPIO_AD_B1_07_LPUART3_RXD			0x118 0x308 0x538 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_07_SPDIF_EXT_CLK			0x118 0x308 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_07_CSI_HSYNC				0x118 0x308 0x420 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_07_GPIO1_IO23			0x118 0x308 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_07_USDHC2_DATA3			0x118 0x308 0x5F4 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_07_KPP_COL04				0x118 0x308 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_08_FLEXSPI_A_SS1_B			0x11C 0x30C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_08_FLEXPWM4_PWM0_A			0x11C 0x30C 0x494 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_08_FLEXCAN1_TX			0x11C 0x30C 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_08_CCM_PMIC_READY			0x11C 0x30C 0x3FC 0x3 0x3
+#define MXRT1050_IOMUXC_GPIO_AD_B1_08_CSI_DATA09			0x11C 0x30C 0x41C 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_08_GPIO1_IO24			0x11C 0x30C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_08_USDHC2_CMD			0x11C 0x30C 0x5E4 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_08_KPP_ROW03				0x11C 0x30C 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_09_FLEXSPI_A_DQS			0x120 0x310 0x4A4 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_09_FLEXPWM4_PWM1_A			0x120 0x310 0x498 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_09_FLEXCAN1_RX			0x120 0x310 0x44C 0x2 0x2
+#define MXRT1050_IOMUXC_GPIO_AD_B1_09_SAI1_MCLK				0x120 0x310 0x58C 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_09_CSI_DATA08			0x120 0x310 0x418 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_09_GPIO1_IO25			0x120 0x310 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_09_USDHC2_CLK			0x120 0x310 0x5DC 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_09_KPP_COL03				0x120 0x310 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_10_FLEXSPI_A_DATA3			0x124 0x314 0x4B4 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_10_WDOG1_B				0x124 0x314 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_10_LPUART8_TXD			0x124 0x314 0x564 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_10_SAI1_RX_SYNC			0x124 0x314 0x5A4 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_10_CSI_DATA07			0x124 0x314 0x414 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_10_GPIO1_IO26			0x124 0x314 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_10_USDHC2_WP				0x124 0x314 0x608 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_10_KPP_ROW02				0x124 0x314 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_11_FLEXSPI_A_DATA2			0x128 0x318 0x4B0 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_11_EWM_OUT_B				0x128 0x318 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_11_LPUART8_RXD			0x128 0x318 0x560 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_11_SAI1_RX_BCLK			0x128 0x318 0x590 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_11_CSI_DATA06			0x128 0x318 0x410 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_11_GPIO1_IO27			0x128 0x318 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_11_USDHC2_RESET_B			0x128 0x318 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_11_KPP_COL02				0x128 0x318 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_12_FLEXSPI_A_DATA1			0x12C 0x31C 0x4AC 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_12_ACMP1_OUT				0x12C 0x31C 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_12_LPSPI3_PCS0			0x12C 0x31C 0x50C 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_12_SAI1_RX_DATA00			0x12C 0x31C 0x594 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_12_CSI_DATA05			0x12C 0x31C 0x40C 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_12_GPIO1_IO28			0x12C 0x31C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_12_USDHC2_DATA4			0x12C 0x31C 0x5F8 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_12_KPP_ROW01				0x12C 0x31C 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_13_FLEXSPI_A_DATA0			0x130 0x320 0x4A8 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_13_ACMP2_OUT				0x130 0x320 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_13_LPSPI3_SDI			0x130 0x320 0x514 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_13_SAI1_TX_DATA00			0x130 0x320 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_13_CSI_DATA04			0x130 0x320 0x408 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_13_GPIO1_IO29			0x130 0x320 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_13_USDHC2_DATA5			0x130 0x320 0x5FC 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_13_KPP_COL01				0x130 0x320 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_14_FLEXSPI_A_SCLK			0x134 0x324 0x4C8 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_14_ACMP3_OUT				0x134 0x324 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_14_LPSPI3_SDO			0x134 0x324 0x518 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_14_SAI1_TX_BCLK			0x134 0x324 0x5A8 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_14_CSI_DATA03			0x134 0x324 0x404 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_14_GPIO1_IO30			0x134 0x324 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_14_USDHC2_DATA6			0x134 0x324 0x600 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_14_KPP_ROW00				0x134 0x324 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_15_FLEXSPI_A_SS0_B			0x138 0x328 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_15_ACMP4_OUT				0x138 0x328 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_15_LPSPI3_SCK			0x138 0x328 0x510 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_15_SAI1_TX_SYNC			0x138 0x328 0x5AC 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_15_CSI_DATA02			0x138 0x328 0x400 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_15_GPIO1_IO31			0x138 0x328 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_15_USDHC2_DATA7			0x138 0x328 0x604 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_15_KPP_COL00				0x138 0x328 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_00_LCD_CLK				0x13C 0x32C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_00_TMR1_TIMER0				0x13C 0x32C 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_00_MQS_RIGHT				0x13C 0x32C 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_00_LPSPI4_PCS0				0x13C 0x32C 0x51C 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_00_FLEXIO2_D00				0x13C 0x32C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_00_GPIO2_IO00				0x13C 0x32C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_00_SEMC_CSX1				0x13C 0x32C 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_01_LCD_ENABLE				0x140 0x330 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_01_TMR1_TIMER1				0x140 0x330 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_01_MQS_LEFT				0x140 0x330 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_01_LPSPI4_SDI				0x140 0x330 0x524 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_01_FLEXIO2_D01				0x140 0x330 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_01_GPIO2_IO01				0x140 0x330 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_01_SEMC_CSX2				0x140 0x330 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_02_LCD_HSYNC				0x144 0x334 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_02_TMR1_TIMER2				0x144 0x334 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_02_FLEXCAN1_TX				0x144 0x334 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_02_LPSPI4_SDO				0x144 0x334 0x528 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_02_FLEXIO2_D02				0x144 0x334 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_02_GPIO2_IO02				0x144 0x334 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_02_SEMC_CSX3				0x144 0x334 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_03_LCD_VSYNC				0x148 0x338 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_03_TMR2_TIMER0				0x148 0x338 0x56C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_03_FLEXCAN1_RX				0x148 0x338 0x44C 0x2 0x3
+#define MXRT1050_IOMUXC_GPIO_B0_03_LPSPI4_SCK				0x148 0x338 0x520 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_03_FLEXIO2_D03				0x148 0x338 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_03_GPIO2_IO03				0x148 0x338 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_03_WDOG2_RESET_B_DEB			0x148 0x338 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_04_LCD_DATA00				0x14C 0x33C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_04_TMR2_TIMER1				0x14C 0x33C 0x570 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_04_LPI2C2_SCL				0x14C 0x33C 0x4D4 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_04_ARM_TRACE00				0x14C 0x33C 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_04_FLEXIO2_D04				0x14C 0x33C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_04_GPIO2_IO04				0x14C 0x33C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_04_SRC_BT_CFG00				0x14C 0x33C 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_05_LCD_DATA01				0x150 0x340 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_05_TMR2_TIMER2				0x150 0x340 0x574 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_05_LPI2C2_SDA				0x150 0x340 0x4D8 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_05_ARM_TRACE01				0x150 0x340 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_05_FLEXIO2_D05				0x150 0x340 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_05_GPIO2_IO05				0x150 0x340 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_05_SRC_BT_CFG01				0x150 0x340 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_06_LCD_DATA02				0x154 0x344 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_06_TMR3_TIMER0				0x154 0x344 0x57C 0x1 0x2
+#define MXRT1050_IOMUXC_GPIO_B0_06_FLEXPWM2_PWM0_A			0x154 0x344 0x478 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_06_ARM_TRACE02				0x154 0x344 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_06_FLEXIO2_D06				0x154 0x344 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_06_GPIO2_IO06				0x154 0x344 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_06_SRC_BT_CFG02				0x154 0x344 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_07_LCD_DATA03				0x158 0x348 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_07_TMR3_TIMER1				0x158 0x348 0x580 0x1 0x2
+#define MXRT1050_IOMUXC_GPIO_B0_07_FLEXPWM2_PWM0_B			0x158 0x348 0x488 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_07_ARM_TRACE03				0x158 0x348 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_07_FLEXIO2_D07				0x158 0x348 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_07_GPIO2_IO07				0x158 0x348 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_07_SRC_BT_CFG03				0x158 0x348 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_08_LCD_DATA04				0x15C 0x34C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_08_TMR3_TIMER2				0x15C 0x34C 0x584 0x1 0x2
+#define MXRT1050_IOMUXC_GPIO_B0_08_FLEXPWM2_PWM1_A			0x15C 0x34C 0x47C 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_08_LPUART3_TXD				0x15C 0x34C 0x53C 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B0_08_FLEXIO2_D08				0x15C 0x34C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_08_GPIO2_IO08				0x15C 0x34C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_08_SRC_BT_CFG04				0x15C 0x34C 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_09_LCD_DATA05				0x160 0x350 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_09_TMR4_TIMER0				0x160 0x350 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_09_FLEXPWM2_PWM1_B			0x160 0x350 0x48C 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_09_LPUART3_RXD				0x160 0x350 0x538 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B0_09_FLEXIO2_D09				0x160 0x350 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_09_GPIO2_IO09				0x160 0x350 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_09_SRC_BT_CFG05				0x160 0x350 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_10_LCD_DATA06				0x164 0x354 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_10_TMR4_TIMER1				0x164 0x354 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_10_FLEXPWM2_PWM2_A			0x164 0x354 0x480 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_10_SAI1_TX_DATA03			0x164 0x354 0x598 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_10_FLEXIO2_D10				0x164 0x354 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_10_GPIO2_IO10				0x164 0x354 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_10_SRC_BT_CFG06				0x164 0x354 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_11_LCD_DATA07				0x168 0x358 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_11_TMR4_TIMER2				0x168 0x358 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_11_FLEXPWM2_PWM2_B			0x168 0x358 0x490 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_11_SAI1_TX_DATA02			0x168 0x358 0x59C 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_11_FLEXIO2_D11				0x168 0x358 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_11_GPIO2_IO11				0x168 0x358 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_11_SRC_BT_CFG07				0x168 0x358 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_12_LCD_DATA08				0x16C 0x35C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_12_XBAR_INOUT10				0x16C 0x35C 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_12_ARM_TRACE_CLK			0x16C 0x35C 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_12_SAI1_TX_DATA01			0x16C 0x35C 0x5A0 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_12_FLEXIO2_D12				0x16C 0x35C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_12_GPIO2_IO12				0x16C 0x35C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_12_SRC_BT_CFG08				0x16C 0x35C 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_13_LCD_DATA09				0x170 0x360 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_13_XBAR_INOUT11				0x170 0x360 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_13_ARM_TRACE_SWO			0x170 0x360 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_13_SAI1_MCLK				0x170 0x360 0x58C 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B0_13_FLEXIO2_D13				0x170 0x360 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_13_GPIO2_IO13				0x170 0x360 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_13_SRC_BT_CFG09				0x170 0x360 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_14_LCD_DATA10				0x174 0x364 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_14_XBAR_INOUT12				0x174 0x364 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_14_ARM_CM7_TXEV				0x174 0x364 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_14_SAI1_RX_SYNC				0x174 0x364 0x5A4 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B0_14_FLEXIO2_D14				0x174 0x364 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_14_GPIO2_IO14				0x174 0x364 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_14_SRC_BT_CFG10				0x174 0x364 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_15_LCD_DATA11				0x178 0x368 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_15_XBAR_INOUT13				0x178 0x368 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_15_ARM_CM7_RXEV				0x178 0x368 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_15_SAI1_RX_BCLK				0x178 0x368 0x590 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B0_15_FLEXIO2_D15				0x178 0x368 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_15_GPIO2_IO15				0x178 0x368 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_15_SRC_BT_CFG11				0x178 0x368 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_00_LCD_DATA12				0x17C 0x36C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_00_XBAR_INOUT14				0x17C 0x36C 0x644 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_00_LPUART4_TXD				0x17C 0x36C 0x544 0x2 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_00_SAI1_RX_DATA00			0x17C 0x36C 0x594 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_00_FLEXIO2_D16				0x17C 0x36C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_00_GPIO2_IO16				0x17C 0x36C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_00_FLEXPWM1_PWM3_A			0x17C 0x36C 0x454 0x6 0x4
+
+#define MXRT1050_IOMUXC_GPIO_B1_01_LCD_DATA13				0x180 0x370 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_01_XBAR_INOUT15				0x180 0x370 0x648 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_01_LPUART4_RXD				0x180 0x370 0x540 0x2 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_01_SAI1_TX_DATA00			0x180 0x370 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_01_FLEXIO2_D17				0x180 0x370 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_01_GPIO2_IO17				0x180 0x370 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_01_FLEXPWM1_PWM3_B			0x180 0x370 0x464 0x6 0x4
+
+#define MXRT1050_IOMUXC_GPIO_B1_02_LCD_DATA14				0x184 0x374 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_02_XBAR_INOUT16				0x184 0x374 0x64C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_02_LPSPI4_PCS2				0x184 0x374 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_02_SAI1_TX_BCLK				0x184 0x374 0x5A8 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_02_FLEXIO2_D18				0x184 0x374 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_02_GPIO2_IO18				0x184 0x374 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_02_FLEXPWM2_PWM3_A			0x184 0x374 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_03_LCD_DATA15				0x188 0x378 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_03_XBAR_INOUT17				0x188 0x378 0x62C 0x1 0x3
+#define MXRT1050_IOMUXC_GPIO_B1_03_LPSPI4_PCS1				0x188 0x378 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_03_SAI1_TX_SYNC				0x188 0x378 0x5AC 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_03_FLEXIO2_D19				0x188 0x378 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_03_GPIO2_IO19				0x188 0x378 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_03_FLEXPWM2_PWM3_B			0x188 0x378 0x484 0x6 0x3
+
+#define MXRT1050_IOMUXC_GPIO_B1_04_LCD_DATA16				0x18C 0x37C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_04_LPSPI4_PCS0				0x18C 0x37C 0x51C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_04_CSI_DATA15				0x18C 0x37C 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_04_ENET_RX_DATA00			0x18C 0x37C 0x434 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_04_FLEXIO2_D20				0x18C 0x37C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_04_GPIO2_IO20				0x18C 0x37C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_05_LCD_DATA17				0x190 0x380 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_05_LPSPI4_SDI				0x190 0x380 0x524 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_05_CSI_DATA14				0x190 0x380 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_05_ENET_RX_DATA01			0x190 0x380 0x438 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_05_FLEXIO2_D21				0x190 0x380 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_05_GPIO2_IO21				0x190 0x380 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_06_LCD_DATA18				0x194 0x384 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_06_LPSPI4_SDO				0x194 0x384 0x528 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_06_CSI_DATA13				0x194 0x384 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_06_ENET_RX_EN				0x194 0x384 0x43C 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_06_FLEXIO2_D22				0x194 0x384 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_06_GPIO2_IO22				0x194 0x384 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_07_LCD_DATA19				0x198 0x388 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_07_LPSPI4_SCK				0x198 0x388 0x520 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_07_CSI_DATA12				0x198 0x388 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_07_ENET_TX_DATA00			0x198 0x388 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_07_FLEXIO2_D23				0x198 0x388 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_07_GPIO2_IO23				0x198 0x388 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_08_LCD_DATA20				0x19C 0x38C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_08_TMR1_TIMER3				0x19C 0x38C 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_08_CSI_DATA11				0x19C 0x38C 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_08_ENET_TX_DATA01			0x19C 0x38C 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_08_FLEXIO2_D24				0x19C 0x38C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_08_GPIO2_IO24				0x19C 0x38C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_08_FLEXCAN2_TX				0x19C 0x38C 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_09_LCD_DATA21				0x1A0 0x390 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_09_TMR2_TIMER3				0x1A0 0x390 0x578 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_09_CSI_DATA10				0x1A0 0x390 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_09_ENET_TX_EN				0x1A0 0x390 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_09_FLEXIO2_D25				0x1A0 0x390 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_09_GPIO2_IO25				0x1A0 0x390 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_09_FLEXCAN2_RX				0x1A0 0x390 0x450 0x6 0x3
+
+#define MXRT1050_IOMUXC_GPIO_B1_10_LCD_DATA22				0x1A4 0x394 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_10_TMR3_TIMER3				0x1A4 0x394 0x588 0x1 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_10_CSI_DATA00				0x1A4 0x394 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_10_ENET_TX_CLK				0x1A4 0x394 0x448 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_10_FLEXIO2_D26				0x1A4 0x394 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_10_GPIO2_IO26				0x1A4 0x394 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_10_ENET_REF_CLK				0x1A4 0x394 0x42C 0x6 0x1
+
+#define MXRT1050_IOMUXC_GPIO_B1_11_LCD_DATA23				0x1A8 0x398 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_11_TMR4_TIMER3				0x1A8 0x398 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_11_CSI_DATA01				0x1A8 0x398 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_11_ENET_RX_ER				0x1A8 0x398 0x440 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_11_FLEXIO2_D27				0x1A8 0x398 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_11_GPIO2_IO27				0x1A8 0x398 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_11_LPSPI4_PCS3				0x1A8 0x398 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_12_LPUART5_TXD				0x1AC 0x39C 0x54C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_12_CSI_PIXCLK				0x1AC 0x39C 0x424 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_12_ENET_1588_EVENT0_IN			0x1AC 0x39C 0x444 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_12_FLEXIO2_D28				0x1AC 0x39C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_12_GPIO2_IO28				0x1AC 0x39C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_12_USDHC1_CD_B				0x1AC 0x39C 0x5D4 0x6 0x2
+
+#define MXRT1050_IOMUXC_GPIO_B1_13_WDOG1_B				0x1B0 0x3A0 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_13_LPUART5_RXD				0x1B0 0x3A0 0x548 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_13_CSI_VSYNC				0x1B0 0x3A0 0x428 0x2 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_13_ENET_1588_EVENT0_OUT			0x1B0 0x3A0 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_13_FLEXIO2_D29				0x1B0 0x3A0 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_13_GPIO2_IO29				0x1B0 0x3A0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_13_USDHC1_WP				0x1B0 0x3A0 0x5D8 0x6 0x3
+
+#define MXRT1050_IOMUXC_GPIO_B1_14_ENET_MDC				0x1B4 0x3A4 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_14_FLEXPWM4_PWM2_A			0x1B4 0x3A4 0x49C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_14_CSI_HSYNC				0x1B4 0x3A4 0x420 0x2 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_14_XBAR_INOUT02				0x1B4 0x3A4 0x60C 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_14_FLEXIO2_D30				0x1B4 0x3A4 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_14_GPIO2_IO30				0x1B4 0x3A4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_14_USDHC1_VSELECT			0x1B4 0x3A4 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_15_ENET_MDIO				0x1B8 0x3A8 0x430 0x0 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_15_FLEXPWM4_PWM3_A			0x1B8 0x3A8 0x4A0 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_15_CSI_MCLK				0x1B8 0x3A8 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_15_XBAR_INOUT03				0x1B8 0x3A8 0x610 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_15_FLEXIO2_D31				0x1B8 0x3A8 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_15_GPIO2_IO31				0x1B8 0x3A8 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_15_USDHC1_RESET_B			0x1B8 0x3A8 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B0_00_USDHC1_CMD			0x1BC 0x3AC 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_00_FLEXPWM1_PWM0_A			0x1BC 0x3AC 0x458 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_00_LPI2C3_SCL			0x1BC 0x3AC 0x4DC 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_00_XBAR_INOUT04			0x1BC 0x3AC 0x614 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_00_LPSPI1_SCK			0x1BC 0x3AC 0x4F0 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_00_GPIO3_IO12			0x1BC 0x3AC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_00_FLEXSPI_A_SS1_B			0x1BC 0x3AC 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B0_01_USDHC1_CLK			0x1C0 0x3B0 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_01_FLEXPWM1_PWM0_B			0x1C0 0x3B0 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_01_LPI2C3_SDA			0x1C0 0x3B0 0x4E0 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_01_XBAR_INOUT05			0x1C0 0x3B0 0x618 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_01_LPSPI1_PCS0			0x1C0 0x3B0 0x4EC 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_01_GPIO3_IO13			0x1C0 0x3B0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_01_FLEXSPI_B_SS1_B			0x1C0 0x3B0 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0			0x1C4 0x3B4 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_02_FLEXPWM1_PWM1_A			0x1C4 0x3B4 0x45C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_02_LPUART8_CTS_B			0x1C4 0x3B4 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_02_XBAR_INOUT06			0x1C4 0x3B4 0x61C 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_02_LPSPI1_SDO			0x1C4 0x3B4 0x4F8 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_02_GPIO3_IO14			0x1C4 0x3B4 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1			0x1C8 0x3B8 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_03_FLEXPWM1_PWM1_B			0x1C8 0x3B8 0x46C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_03_LPUART8_RTS_B			0x1C8 0x3B8 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_03_XBAR_INOUT07			0x1C8 0x3B8 0x620 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_03_LPSPI1_SDI			0x1C8 0x3B8 0x4F4 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_03_GPIO3_IO15			0x1C8 0x3B8 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2			0x1CC 0x3BC 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_04_FLEXPWM1_PWM2_A			0x1CC 0x3BC 0x460 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_04_LPUART8_TXD			0x1CC 0x3BC 0x564 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_04_XBAR_INOUT08			0x1CC 0x3BC 0x624 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_04_FLEXSPI_B_SS0_B			0x1CC 0x3BC 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_04_GPIO3_IO16			0x1CC 0x3BC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_04_CCM_CLKO1				0x1CC 0x3BC 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3			0x1D0 0x3C0 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_05_FLEXPWM1_PWM2_B			0x1D0 0x3C0 0x470 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_05_LPUART8_RXD			0x1D0 0x3C0 0x560 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_05_XBAR_INOUT09			0x1D0 0x3C0 0x628 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_05_FLEXSPI_B_DQS			0x1D0 0x3C0 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_05_GPIO3_IO17			0x1D0 0x3C0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_05_CCM_CLKO2				0x1D0 0x3C0 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_00_USDHC2_DATA3			0x1D4 0x3C4 0x5F4 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_00_FLEXSPI_B_DATA3			0x1D4 0x3C4 0x4C4 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_00_FLEXPWM1_PWM3_A			0x1D4 0x3C4 0x454 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_00_SAI1_TX_DATA03			0x1D4 0x3C4 0x598 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_00_LPUART4_TXD			0x1D4 0x3C4 0x544 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_00_GPIO3_IO00			0x1D4 0x3C4 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_01_USDHC2_DATA2			0x1D8 0x3C8 0x5F0 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_01_FLEXSPI_B_DATA2			0x1D8 0x3C8 0x4C0 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_01_FLEXPWM1_PWM3_B			0x1D8 0x3C8 0x464 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_01_SAI1_TX_DATA02			0x1D8 0x3C8 0x59C 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_01_LPUART4_RXD			0x1D8 0x3C8 0x540 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_01_GPIO3_IO01			0x1D8 0x3C8 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_02_USDHC2_DATA1			0x1DC 0x3CC 0x5EC 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_02_FLEXSPI_B_DATA1			0x1DC 0x3CC 0x4BC 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_02_FLEXPWM2_PWM3_A			0x1DC 0x3CC 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_02_SAI1_TX_DATA01			0x1DC 0x3CC 0x5A0 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_02_FLEXCAN1_TX			0x1DC 0x3CC 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_02_GPIO3_IO02			0x1DC 0x3CC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_02_CCM_WAIT				0x1DC 0x3CC 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_03_USDHC2_DATA0			0x1E0 0x3D0 0x5E8 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_03_FLEXSPI_B_DATA0			0x1E0 0x3D0 0x4B8 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_03_FLEXPWM2_PWM3_B			0x1E0 0x3D0 0x484 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_03_SAI1_MCLK				0x1E0 0x3D0 0x58C 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_03_FLEXCAN1_RX			0x1E0 0x3D0 0x44C 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_03_GPIO3_IO03			0x1E0 0x3D0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_03_CCM_PMIC_READY			0x1E0 0x3D0 0x3FC 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_04_USDHC2_CLK			0x1E4 0x3D4 0x5DC 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_04_FLEXSPI_B_SCLK			0x1E4 0x3D4 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_04_LPI2C1_SCL			0x1E4 0x3D4 0x4CC 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_04_SAI1_RX_SYNC			0x1E4 0x3D4 0x5A4 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_04_FLEXCAN1_A_SS1_B			0x1E4 0x3D4 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_04_GPIO3_IO04			0x1E4 0x3D4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_04_CCM_STOP				0x1E4 0x3D4 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_05_USDHC2_CMD			0x1E8 0x3D8 0x5E4 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_05_FLEXSPI_A_DQS			0x1E8 0x3D8 0x4A4 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_05_LPI2C1_SDA			0x1E8 0x3D8 0x4D0 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_05_SAI1_RX_BCLK			0x1E8 0x3D8 0x590 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_05_FLEXCAN1_B_SS0_B			0x1E8 0x3D8 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_05_GPIO3_IO05			0x1E8 0x3D8 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_06_USDHC2_RESET_B			0x1EC 0x3DC 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_06_FLEXSPI_A_SS0_B			0x1EC 0x3DC 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_06_LPUART7_CTS_B			0x1EC 0x3DC 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_06_SAI1_RX_DATA00			0x1EC 0x3DC 0x594 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_06_LPSPI2_PCS0			0x1EC 0x3DC 0x4FC 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_06_GPIO3_IO06			0x1EC 0x3DC 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_07_SEMC_CSX1				0x1F0 0x3E0 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_07_FLEXSPI_A_SCLK			0x1F0 0x3E0 0x4C8 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_07_LPUART7_RTS_B			0x1F0 0x3E0 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_07_SAI1_TX_DATA00			0x1F0 0x3E0 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_07_LPSPI2_SCK			0x1F0 0x3E0 0x500 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_07_GPIO3_IO07			0x1F0 0x3E0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_07_CCM_REF_EN_B			0x1F0 0x3E0 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_08_USDHC2_DATA4			0x1F4 0x3E4 0x5F8 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_08_FLEXSPI_A_DATA0			0x1F4 0x3E4 0x4A8 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_08_LPUART7_TXD			0x1F4 0x3E4 0x55C 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_08_SAI1_TX_BLCK			0x1F4 0x3E4 0x5A8 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_08_LPSPI2_SDO			0x1F4 0x3E4 0x508 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_08_GPIO3_IO08			0x1F4 0x3E4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_08_SEMC_CSX2				0x1F4 0x3E4 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_09_USDHC2_DATA5			0x1F8 0x3E8 0x5FC 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_09_FLEXSPI_A_DATA1			0x1F8 0x3E8 0x4AC 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_09_LPUART7_RXD			0x1F8 0x3E8 0x558 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_09_SAI1_TX_SYNC			0x1F8 0x3E8 0x5AC 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_09_LPSPI2_SDI			0x1F8 0x3E8 0x504 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_09_GPIO3_IO09			0x1F8 0x3E8 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_10_USDHC2_DATA6			0x1FC 0x3EC 0x600 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_10_FLEXSPI_A_DATA2			0x1FC 0x3EC 0x4B0 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_10_LPUART2_RXD			0x1FC 0x3EC 0x52C 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_10_LPI2C2_SDA			0x1FC 0x3EC 0x4D8 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_10_LPSPI2_PCS2			0x1FC 0x3EC 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_10_GPIO3_IO10			0x1FC 0x3EC 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_11_USDHC2_DATA7			0x200 0x3F0 0x604 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_11_FLEXSPI_A_DATA3			0x200 0x3F0 0x4B4 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_11_LPUART2_TXD			0x200 0x3F0 0x530 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_11_LPI2C2_SCL			0x200 0x3F0 0x4D4 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_11_LPSPI2_PCS3			0x200 0x3F0 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_11_GPIO3_IO11			0x200 0x3F0 0x000 0x5 0x0
+
+#endif /* _DT_BINDINGS_PINCTRL_IMXRT1050_PINFUNC_H */
diff --git a/arch/arm/boot/dts/nxp/imx/imxrt1050.dtsi b/arch/arm/boot/dts/nxp/imx/imxrt1050.dtsi
new file mode 100644
index 000000000000..b0bad0d1ba36
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imxrt1050.dtsi
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019
+ * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
+ */
+
+#include "../../armv7-m.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/imxrt1050-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	clocks {
+		osc: osc {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+		};
+
+		osc3M: osc3M {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <3000000>;
+		};
+	};
+
+	soc {
+		lpuart1: serial@40184000 {
+			compatible = "fsl,imxrt1050-lpuart", "fsl,imx7ulp-lpuart";
+			reg = <0x40184000 0x4000>;
+			interrupts = <20>;
+			clocks = <&clks IMXRT1050_CLK_LPUART1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		iomuxc: pinctrl@401f8000 {
+			compatible = "fsl,imxrt1050-iomuxc";
+			reg = <0x401f8000 0x4000>;
+			fsl,mux_mask = <0x7>;
+		};
+
+		anatop: anatop@400d8000 {
+			compatible = "fsl,imxrt-anatop";
+			reg = <0x400d8000 0x4000>;
+		};
+
+		clks: clock-controller@400fc000 {
+			compatible = "fsl,imxrt1050-ccm";
+			reg = <0x400fc000 0x4000>;
+			interrupts = <95>, <96>;
+			clocks = <&osc>;
+			clock-names = "osc";
+			#clock-cells = <1>;
+			assigned-clocks = <&clks IMXRT1050_CLK_PLL1_BYPASS>,
+				<&clks IMXRT1050_CLK_PLL1_BYPASS>,
+				<&clks IMXRT1050_CLK_PLL2_BYPASS>,
+				<&clks IMXRT1050_CLK_PLL3_BYPASS>,
+				<&clks IMXRT1050_CLK_PLL3_PFD1_664_62M>,
+				<&clks IMXRT1050_CLK_PLL2_PFD2_396M>;
+			assigned-clock-parents = <&clks IMXRT1050_CLK_PLL1_REF_SEL>,
+				<&clks IMXRT1050_CLK_PLL1_ARM>,
+				<&clks IMXRT1050_CLK_PLL2_SYS>,
+				<&clks IMXRT1050_CLK_PLL3_USB_OTG>,
+				<&clks IMXRT1050_CLK_PLL3_USB_OTG>,
+				<&clks IMXRT1050_CLK_PLL2_SYS>;
+		};
+
+		edma1: dma-controller@400e8000 {
+			#dma-cells = <2>;
+			compatible = "fsl,imx7ulp-edma";
+			reg = <0x400e8000 0x4000>,
+				<0x400ec000 0x4000>;
+			dma-channels = <32>;
+			interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>, <8>,
+				<9>, <10>, <11>, <12>, <13>, <14>, <15>, <16>;
+			clock-names = "dma", "dmamux0";
+			clocks = <&clks IMXRT1050_CLK_DMA>,
+				 <&clks IMXRT1050_CLK_DMA_MUX>;
+		};
+
+		usdhc1: mmc@402c0000 {
+			compatible = "fsl,imxrt1050-usdhc", "fsl,imx6sl-usdhc";
+			reg = <0x402c0000 0x4000>;
+			interrupts = <110>;
+			clocks = <&clks IMXRT1050_CLK_IPG_PDOF>,
+				<&clks IMXRT1050_CLK_AHB_PODF>,
+				<&clks IMXRT1050_CLK_USDHC1>;
+			clock-names = "ipg", "ahb", "per";
+			bus-width = <4>;
+			fsl,wp-controller;
+			no-1-8-v;
+			max-frequency = <200000000>;
+			fsl,tuning-start-tap = <20>;
+			fsl,tuning-step = <2>;
+			status = "disabled";
+		};
+
+		gpio1: gpio@401b8000 {
+			compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
+			reg = <0x401b8000 0x4000>;
+			interrupts = <80>, <81>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@401bc000 {
+			compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
+			reg = <0x401bc000 0x4000>;
+			interrupts = <82>, <83>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@401c0000 {
+			compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
+			reg = <0x401c0000 0x4000>;
+			interrupts = <84>, <85>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio4: gpio@401c4000 {
+			compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
+			reg = <0x401c4000 0x4000>;
+			interrupts = <86>, <87>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio5: gpio@400c0000 {
+			compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
+			reg = <0x400c0000 0x4000>;
+			interrupts = <88>, <89>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpt: timer@401ec000 {
+			compatible = "fsl,imxrt1050-gpt", "fsl,imx6dl-gpt", "fsl,imx6sl-gpt";
+			reg = <0x401ec000 0x4000>;
+			interrupts = <100>;
+			clocks = <&osc3M>;
+			clock-names = "per";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imxrt1170-pinfunc.h b/arch/arm/boot/dts/nxp/imx/imxrt1170-pinfunc.h
new file mode 100644
index 000000000000..3b9fff2f08e1
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imxrt1170-pinfunc.h
@@ -0,0 +1,1561 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (C) 2021
+ * Author(s): Jesse Taube <Mr.Bossman075@gmail.com>
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_IMXRT1170_PINFUNC_H
+#define _DT_BINDINGS_PINCTRL_IMXRT1170_PINFUNC_H
+
+#define IMX_PAD_SION		0x40000000
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+
+#define IOMUXC_GPIO_LPSR_00_FLEXCAN3_TX				0x000 0x040 0x0 0x0 0x0
+#define IOMUXC_GPIO_LPSR_00_MIC_CLK				0x000 0x040 0x0 0x1 0x0
+#define IOMUXC_GPIO_LPSR_00_MQS_RIGHT				0x000 0x040 0x0 0x2 0x0
+#define IOMUXC_GPIO_LPSR_00_ARM_CM4_EVENTO			0x000 0x040 0x0 0x3 0x0
+#define IOMUXC_GPIO_LPSR_00_GPIO_MUX6_IO00			0x000 0x040 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_00_LPUART12_TXD			0x000 0x040 0x0B0 0x6 0x0
+#define IOMUXC_GPIO_LPSR_00_SAI4_MCLK				0x000 0x040 0x0C8 0x7 0x0
+#define IOMUXC_GPIO_LPSR_00_GPIO12_IO00				0x000 0x040 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_LPSR_01_FLEXCAN3_RX				0x004 0x044 0x080 0x0 0x0
+#define IOMUXC_GPIO_LPSR_01_MIC_BITSTREAM0			0x004 0x044 0x0B4 0x1 0x0
+#define IOMUXC_GPIO_LPSR_01_MQS_LEFT				0x004 0x044 0x0 0x2 0x0
+#define IOMUXC_GPIO_LPSR_01_ARM_CM4_EVENTI			0x004 0x044 0x0 0x3 0x0
+#define IOMUXC_GPIO_LPSR_01_GPIO_MUX6_IO01			0x004 0x044 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_01_LPUART12_RXD			0x004 0x044 0x0AC 0x6 0x0
+#define IOMUXC_GPIO_LPSR_01_GPIO12_IO01				0x004 0x044 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_LPSR_02_GPIO12_IO02				0x008 0x048 0x0 0xA 0x0
+#define IOMUXC_GPIO_LPSR_02_SRC_BOOT_MODE00			0x008 0x048 0x0 0x0 0x0
+#define IOMUXC_GPIO_LPSR_02_LPSPI5_SCK				0x008 0x048 0x098 0x1 0x0
+#define IOMUXC_GPIO_LPSR_02_SAI4_TX_DATA			0x008 0x048 0x0 0x2 0x0
+#define IOMUXC_GPIO_LPSR_02_MQS_RIGHT				0x008 0x048 0x0 0x3 0x0
+#define IOMUXC_GPIO_LPSR_02_GPIO_MUX6_IO02			0x008 0x048 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_LPSR_03_SRC_BOOT_MODE01			0x00C 0x04C 0x0 0x0 0x0
+#define IOMUXC_GPIO_LPSR_03_LPSPI5_PCS0				0x00C 0x04C 0x094 0x1 0x0
+#define IOMUXC_GPIO_LPSR_03_SAI4_TX_SYNC			0x00C 0x04C 0x0DC 0x2 0x0
+#define IOMUXC_GPIO_LPSR_03_MQS_LEFT				0x00C 0x04C 0x0 0x3 0x0
+#define IOMUXC_GPIO_LPSR_03_GPIO_MUX6_IO03			0x00C 0x04C 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_03_GPIO12_IO03				0x00C 0x04C 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_LPSR_04_LPI2C5_SDA				0x010 0x050 0x088 0x0 0x0
+#define IOMUXC_GPIO_LPSR_04_LPSPI5_SOUT				0x010 0x050 0x0A0 0x1 0x0
+#define IOMUXC_GPIO_LPSR_04_SAI4_TX_BCLK			0x010 0x050 0x0D8 0x2 0x0
+#define IOMUXC_GPIO_LPSR_04_LPUART12_RTS_B			0x010 0x050 0x0 0x3 0x0
+#define IOMUXC_GPIO_LPSR_04_GPIO_MUX6_IO04			0x010 0x050 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_04_LPUART11_TXD			0x010 0x050 0x0A8 0x6 0x0
+#define IOMUXC_GPIO_LPSR_04_GPIO12_IO04				0x010 0x050 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_LPSR_05_GPIO12_IO05				0x014 0x054 0x0 0xA 0x0
+#define IOMUXC_GPIO_LPSR_05_LPI2C5_SCL				0x014 0x054 0x084 0x0 0x0
+#define IOMUXC_GPIO_LPSR_05_LPSPI5_SIN				0x014 0x054 0x09C 0x1 0x0
+#define IOMUXC_GPIO_LPSR_05_SAI4_MCLK				0x014 0x054 0x0C8 0x2 0x1
+#define IOMUXC_GPIO_LPSR_05_LPUART12_CTS_B			0x014 0x054 0x0 0x3 0x0
+#define IOMUXC_GPIO_LPSR_05_GPIO_MUX6_IO05			0x014 0x054 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_05_LPUART11_RXD			0x014 0x054 0x0A4 0x6 0x0
+#define IOMUXC_GPIO_LPSR_05_NMI_GLUE_NMI			0x014 0x054 0x0C4 0x7 0x0
+
+#define IOMUXC_GPIO_LPSR_06_LPI2C6_SDA				0x018 0x058 0x090 0x0 0x0
+#define IOMUXC_GPIO_LPSR_06_SAI4_RX_DATA			0x018 0x058 0x0D0 0x2 0x0
+#define IOMUXC_GPIO_LPSR_06_LPUART12_TXD			0x018 0x058 0x0B0 0x3 0x1
+#define IOMUXC_GPIO_LPSR_06_LPSPI6_PCS3				0x018 0x058 0x0 0x4 0x0
+#define IOMUXC_GPIO_LPSR_06_GPIO_MUX6_IO06			0x018 0x058 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_06_FLEXCAN3_TX				0x018 0x058 0x0 0x6 0x0
+#define IOMUXC_GPIO_LPSR_06_PIT2_TRIGGER3			0x018 0x058 0x0 0x7 0x0
+#define IOMUXC_GPIO_LPSR_06_LPSPI5_PCS1				0x018 0x058 0x0 0x8 0x0
+#define IOMUXC_GPIO_LPSR_06_GPIO12_IO06				0x018 0x058 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_LPSR_07_LPI2C6_SCL				0x01C 0x05C 0x08C 0x0 0x0
+#define IOMUXC_GPIO_LPSR_07_SAI4_RX_BCLK			0x01C 0x05C 0x0CC 0x2 0x0
+#define IOMUXC_GPIO_LPSR_07_LPUART12_RXD			0x01C 0x05C 0x0AC 0x3 0x1
+#define IOMUXC_GPIO_LPSR_07_LPSPI6_PCS2				0x01C 0x05C 0x0 0x4 0x0
+#define IOMUXC_GPIO_LPSR_07_GPIO_MUX6_IO07			0x01C 0x05C 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_07_FLEXCAN3_RX				0x01C 0x05C 0x080 0x6 0x1
+#define IOMUXC_GPIO_LPSR_07_PIT2_TRIGGER2			0x01C 0x05C 0x0 0x7 0x0
+#define IOMUXC_GPIO_LPSR_07_LPSPI5_PCS2				0x01C 0x05C 0x0 0x8 0x0
+#define IOMUXC_GPIO_LPSR_07_GPIO12_IO07				0x01C 0x05C 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_LPSR_08_GPIO12_IO08				0x020 0x060 0x0 0xA 0x0
+#define IOMUXC_GPIO_LPSR_08_LPUART11_TXD			0x020 0x060 0x0A8 0x0 0x1
+#define IOMUXC_GPIO_LPSR_08_FLEXCAN3_TX				0x020 0x060 0x0 0x1 0x0
+#define IOMUXC_GPIO_LPSR_08_SAI4_RX_SYNC			0x020 0x060 0x0D4 0x2 0x0
+#define IOMUXC_GPIO_LPSR_08_MIC_CLK				0x020 0x060 0x0 0x3 0x0
+#define IOMUXC_GPIO_LPSR_08_LPSPI6_PCS1				0x020 0x060 0x0 0x4 0x0
+#define IOMUXC_GPIO_LPSR_08_GPIO_MUX6_IO08			0x020 0x060 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_08_LPI2C5_SDA				0x020 0x060 0x088 0x6 0x1
+#define IOMUXC_GPIO_LPSR_08_PIT2_TRIGGER1			0x020 0x060 0x0 0x7 0x0
+#define IOMUXC_GPIO_LPSR_08_LPSPI5_PCS3				0x020 0x060 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_LPSR_09_GPIO12_IO09				0x024 0x064 0x0 0xA 0x0
+#define IOMUXC_GPIO_LPSR_09_LPUART11_RXD			0x024 0x064 0x0A4 0x0 0x1
+#define IOMUXC_GPIO_LPSR_09_FLEXCAN3_RX				0x024 0x064 0x080 0x1 0x2
+#define IOMUXC_GPIO_LPSR_09_PIT2_TRIGGER0			0x024 0x064 0x0 0x2 0x0
+#define IOMUXC_GPIO_LPSR_09_MIC_BITSTREAM0			0x024 0x064 0x0B4 0x3 0x1
+#define IOMUXC_GPIO_LPSR_09_LPSPI6_PCS0				0x024 0x064 0x0 0x4 0x0
+#define IOMUXC_GPIO_LPSR_09_GPIO_MUX6_IO09			0x024 0x064 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_09_LPI2C5_SCL				0x024 0x064 0x084 0x6 0x1
+#define IOMUXC_GPIO_LPSR_09_SAI4_TX_DATA			0x024 0x064 0x0 0x7 0x0
+
+#define IOMUXC_GPIO_LPSR_10_GPIO12_IO10				0x028 0x068 0x0 0xA 0x0
+#define IOMUXC_GPIO_LPSR_10_JTAG_MUX_TRSTB			0x028 0x068 0x0 0x0 0x0
+#define IOMUXC_GPIO_LPSR_10_LPUART11_CTS_B			0x028 0x068 0x0 0x1 0x0
+#define IOMUXC_GPIO_LPSR_10_LPI2C6_SDA				0x028 0x068 0x090 0x2 0x1
+#define IOMUXC_GPIO_LPSR_10_MIC_BITSTREAM1			0x028 0x068 0x0B8 0x3 0x0
+#define IOMUXC_GPIO_LPSR_10_LPSPI6_SCK				0x028 0x068 0x0 0x4 0x0
+#define IOMUXC_GPIO_LPSR_10_GPIO_MUX6_IO10			0x028 0x068 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_10_LPI2C5_SCLS				0x028 0x068 0x0 0x6 0x0
+#define IOMUXC_GPIO_LPSR_10_SAI4_TX_SYNC			0x028 0x068 0x0DC 0x7 0x1
+#define IOMUXC_GPIO_LPSR_10_LPUART12_TXD			0x028 0x068 0x0B0 0x8 0x2
+
+#define IOMUXC_GPIO_LPSR_11_JTAG_MUX_TDO			0x02C 0x06C 0x0 0x0 0x0
+#define IOMUXC_GPIO_LPSR_11_LPUART11_RTS_B			0x02C 0x06C 0x0 0x1 0x0
+#define IOMUXC_GPIO_LPSR_11_LPI2C6_SCL				0x02C 0x06C 0x08C 0x2 0x1
+#define IOMUXC_GPIO_LPSR_11_MIC_BITSTREAM2			0x02C 0x06C 0x0BC 0x3 0x0
+#define IOMUXC_GPIO_LPSR_11_LPSPI6_SOUT				0x02C 0x06C 0x0 0x4 0x0
+#define IOMUXC_GPIO_LPSR_11_GPIO_MUX6_IO11			0x02C 0x06C 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_11_LPI2C5_SDAS				0x02C 0x06C 0x0 0x6 0x0
+#define IOMUXC_GPIO_LPSR_11_ARM_TRACE_SWO			0x02C 0x06C 0x0 0x7 0x0
+#define IOMUXC_GPIO_LPSR_11_LPUART12_RXD			0x02C 0x06C 0x0AC 0x8 0x2
+#define IOMUXC_GPIO_LPSR_11_GPIO12_IO11				0x02C 0x06C 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_LPSR_12_GPIO12_IO12				0x030 0x070 0x0 0xA 0x0
+#define IOMUXC_GPIO_LPSR_12_JTAG_MUX_TDI			0x030 0x070 0x0 0x0 0x0
+#define IOMUXC_GPIO_LPSR_12_PIT2_TRIGGER0			0x030 0x070 0x0 0x1 0x0
+#define IOMUXC_GPIO_LPSR_12_MIC_BITSTREAM3			0x030 0x070 0x0C0 0x3 0x0
+#define IOMUXC_GPIO_LPSR_12_LPSPI6_SIN				0x030 0x070 0x0 0x4 0x0
+#define IOMUXC_GPIO_LPSR_12_GPIO_MUX6_IO12			0x030 0x070 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_12_LPI2C5_HREQ				0x030 0x070 0x0 0x6 0x0
+#define IOMUXC_GPIO_LPSR_12_SAI4_TX_BCLK			0x030 0x070 0x0D8 0x7 0x1
+#define IOMUXC_GPIO_LPSR_12_LPSPI5_SCK				0x030 0x070 0x098 0x8 0x1
+
+#define IOMUXC_GPIO_LPSR_13_GPIO12_IO13				0x034 0x074 0x0 0xA 0x0
+#define IOMUXC_GPIO_LPSR_13_JTAG_MUX_MOD			0x034 0x074 0x0 0x0 0x0
+#define IOMUXC_GPIO_LPSR_13_MIC_BITSTREAM1			0x034 0x074 0x0B8 0x1 0x1
+#define IOMUXC_GPIO_LPSR_13_PIT2_TRIGGER1			0x034 0x074 0x0 0x2 0x0
+#define IOMUXC_GPIO_LPSR_13_GPIO_MUX6_IO13			0x034 0x074 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_13_SAI4_RX_DATA			0x034 0x074 0x0D0 0x7 0x1
+#define IOMUXC_GPIO_LPSR_13_LPSPI5_PCS0				0x034 0x074 0x094 0x8 0x1
+
+#define IOMUXC_GPIO_LPSR_14_JTAG_MUX_TCK			0x038 0x078 0x0 0x0 0x0
+#define IOMUXC_GPIO_LPSR_14_MIC_BITSTREAM2			0x038 0x078 0x0BC 0x1 0x1
+#define IOMUXC_GPIO_LPSR_14_PIT2_TRIGGER2			0x038 0x078 0x0 0x2 0x0
+#define IOMUXC_GPIO_LPSR_14_GPIO_MUX6_IO14			0x038 0x078 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_14_SAI4_RX_BCLK			0x038 0x078 0x0CC 0x7 0x1
+#define IOMUXC_GPIO_LPSR_14_LPSPI5_SOUT				0x038 0x078 0x0A0 0x8 0x1
+#define IOMUXC_GPIO_LPSR_14_GPIO12_IO14				0x038 0x078 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_LPSR_15_GPIO12_IO15				0x03C 0x07C 0x0 0xA 0x0
+#define IOMUXC_GPIO_LPSR_15_JTAG_MUX_TMS			0x03C 0x07C 0x0 0x0 0x0
+#define IOMUXC_GPIO_LPSR_15_MIC_BITSTREAM3			0x03C 0x07C 0x0C0 0x1 0x1
+#define IOMUXC_GPIO_LPSR_15_PIT2_TRIGGER3			0x03C 0x07C 0x0 0x2 0x0
+#define IOMUXC_GPIO_LPSR_15_GPIO_MUX6_IO15			0x03C 0x07C 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_15_SAI4_RX_SYNC			0x03C 0x07C 0x0D4 0x7 0x1
+#define IOMUXC_GPIO_LPSR_15_LPSPI5_SIN				0x03C 0x07C 0x09C 0x8 0x1
+
+#define IOMUXC_WAKEUP_DIG_GPIO13_IO00				0x40C94000 0x40C94040 0x0 0x5 0x0
+#define IOMUXC_WAKEUP_DIG_NMI_GLUE_NMI				0x40C94000 0x40C94040 0x0C4 0x7 0x1
+
+#define IOMUXC_PMIC_ON_REQ_DIG_SNVS_LP_PMIC_ON_REQ		0x40C94004 0x40C94044 0x0 0x0 0x0
+#define IOMUXC_PMIC_ON_REQ_DIG_GPIO13_IO01			0x40C94004 0x40C94044 0x0 0x5 0x0
+
+#define IOMUXC_PMIC_STBY_REQ_DIG_CCM_PMIC_VSTBY_REQ		0x40C94008 0x40C94048 0x0 0x0 0x0
+#define IOMUXC_PMIC_STBY_REQ_DIG_GPIO13_IO02			0x40C94008 0x40C94048 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SNVS_00_DIG_SNVS_TAMPER0			0x40C9400C 0x40C9404C 0x0 0x0 0x0
+#define IOMUXC_GPIO_SNVS_00_DIG_GPIO13_IO03			0x40C9400C 0x40C9404C 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SNVS_01_DIG_SNVS_TAMPER1			0x40C94010 0x40C94050 0x0 0x0 0x0
+#define IOMUXC_GPIO_SNVS_01_DIG_GPIO13_IO04			0x40C94010 0x40C94050 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SNVS_02_DIG_SNVS_TAMPER2			0x40C94014 0x40C94054 0x0 0x0 0x0
+#define IOMUXC_GPIO_SNVS_02_DIG_GPIO13_IO05			0x40C94014 0x40C94054 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SNVS_03_DIG_SNVS_TAMPER3			0x40C94018 0x40C94058 0x0 0x0 0x0
+#define IOMUXC_GPIO_SNVS_03_DIG_GPIO13_IO06			0x40C94018 0x40C94058 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SNVS_04_DIG_SNVS_TAMPER4			0x40C9401C 0x40C9405C 0x0 0x0 0x0
+#define IOMUXC_GPIO_SNVS_04_DIG_GPIO13_IO07			0x40C9401C 0x40C9405C 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SNVS_05_DIG_SNVS_TAMPER5			0x40C94020 0x40C94060 0x0 0x0 0x0
+#define IOMUXC_GPIO_SNVS_05_DIG_GPIO13_IO08			0x40C94020 0x40C94060 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SNVS_06_DIG_SNVS_TAMPER6			0x40C94024 0x40C94064 0x0 0x0 0x0
+#define IOMUXC_GPIO_SNVS_06_DIG_GPIO13_IO09			0x40C94024 0x40C94064 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SNVS_07_DIG_SNVS_TAMPER7			0x40C94028 0x40C94068 0x0 0x0 0x0
+#define IOMUXC_GPIO_SNVS_07_DIG_GPIO13_IO10			0x40C94028 0x40C94068 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SNVS_08_DIG_SNVS_TAMPER8			0x40C9402C 0x40C9406C 0x0 0x0 0x0
+#define IOMUXC_GPIO_SNVS_08_DIG_GPIO13_IO11			0x40C9402C 0x40C9406C 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SNVS_09_DIG_SNVS_TAMPER9			0x40C94030 0x40C94070 0x0 0x0 0x0
+#define IOMUXC_GPIO_SNVS_09_DIG_GPIO13_IO12			0x40C94030 0x40C94070 0x0 0x5 0x0
+
+#define IOMUXC_TEST_MODE_DIG					0x0 0x40C94034 0x0 0x0 0x0
+
+#define IOMUXC_POR_B_DIG					0x0 0x40C94038 0x0 0x0 0x0
+
+#define IOMUXC_ONOFF_DIG					0x0 0x40C9403C 0x0 0x0 0x0
+
+#define IOMUXC_GPIO_EMC_B1_00_SEMC_DATA00			0x010 0x254 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_00_FLEXPWM4_PWM0_A			0x010 0x254 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_00_GPIO_MUX1_IO00			0x010 0x254 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_00_FLEXIO1_D00			0x010 0x254 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_00_GPIO7_IO00			0x010 0x254 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_01_GPIO7_IO01			0x014 0x258 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_01_SEMC_DATA01			0x014 0x258 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_01_FLEXPWM4_PWM0_B			0x014 0x258 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_01_GPIO_MUX1_IO01			0x014 0x258 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_01_FLEXIO1_D01			0x014 0x258 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_02_SEMC_DATA02			0x018 0x25C 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_02_FLEXPWM4_PWM1_A			0x018 0x25C 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_02_GPIO_MUX1_IO02			0x018 0x25C 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_02_FLEXIO1_D02			0x018 0x25C 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_02_GPIO7_IO02			0x018 0x25C 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_03_SEMC_DATA03			0x01C 0x260 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_03_FLEXPWM4_PWM1_B			0x01C 0x260 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_03_GPIO_MUX1_IO03			0x01C 0x260 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_03_FLEXIO1_D03			0x01C 0x260 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_03_GPIO7_IO03			0x01C 0x260 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_04_GPIO7_IO04			0x020 0x264 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_04_SEMC_DATA04			0x020 0x264 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_04_FLEXPWM4_PWM2_A			0x020 0x264 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_04_GPIO_MUX1_IO04			0x020 0x264 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_04_FLEXIO1_D04			0x020 0x264 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_05_SEMC_DATA05			0x024 0x268 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_05_FLEXPWM4_PWM2_B			0x024 0x268 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_05_GPIO_MUX1_IO05			0x024 0x268 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_05_FLEXIO1_D05			0x024 0x268 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_05_GPIO7_IO05			0x024 0x268 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_06_SEMC_DATA06			0x028 0x26C 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_06_FLEXPWM2_PWM0_A			0x028 0x26C 0x518 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_06_GPIO_MUX1_IO06			0x028 0x26C 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_06_FLEXIO1_D06			0x028 0x26C 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_06_GPIO7_IO06			0x028 0x26C 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_07_GPIO7_IO07			0x02C 0x270 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_07_SEMC_DATA07			0x02C 0x270 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_07_FLEXPWM2_PWM0_B			0x02C 0x270 0x524 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_07_GPIO_MUX1_IO07			0x02C 0x270 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_07_FLEXIO1_D07			0x02C 0x270 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_08_SEMC_DM00				0x030 0x274 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_08_FLEXPWM2_PWM1_A			0x030 0x274 0x51C 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_08_GPIO_MUX1_IO08			0x030 0x274 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_08_FLEXIO1_D08			0x030 0x274 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_08_GPIO7_IO08			0x030 0x274 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_09_SEMC_ADDR00			0x034 0x278 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_09_FLEXPWM2_PWM1_B			0x034 0x278 0x528 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_09_GPT5_CAPTURE1			0x034 0x278 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_09_GPIO_MUX1_IO09			0x034 0x278 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_09_FLEXIO1_D09			0x034 0x278 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_09_GPIO7_IO09			0x034 0x278 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_10_SEMC_ADDR01			0x038 0x27C 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_10_FLEXPWM2_PWM2_A			0x038 0x27C 0x520 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_10_GPT5_CAPTURE2			0x038 0x27C 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_10_GPIO_MUX1_IO10			0x038 0x27C 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_10_FLEXIO1_D10			0x038 0x27C 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_10_GPIO7_IO10			0x038 0x27C 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_11_GPIO7_IO11			0x03C 0x280 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_11_SEMC_ADDR02			0x03C 0x280 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_11_FLEXPWM2_PWM2_B			0x03C 0x280 0x52C 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_11_GPT5_COMPARE1			0x03C 0x280 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_11_GPIO_MUX1_IO11			0x03C 0x280 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_11_FLEXIO1_D11			0x03C 0x280 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_12_SEMC_ADDR03			0x040 0x284 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_12_XBAR1_INOUT04			0x040 0x284 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_12_GPT5_COMPARE2			0x040 0x284 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_12_GPIO_MUX1_IO12			0x040 0x284 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_12_FLEXIO1_D12			0x040 0x284 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_12_GPIO7_IO12			0x040 0x284 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_13_SEMC_ADDR04			0x044 0x288 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_13_XBAR1_INOUT05			0x044 0x288 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_13_GPT5_COMPARE3			0x044 0x288 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_13_GPIO_MUX1_IO13			0x044 0x288 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_13_FLEXIO1_D13			0x044 0x288 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_13_GPIO7_IO13			0x044 0x288 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_14_GPIO7_IO14			0x048 0x28C 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_14_SEMC_ADDR05			0x048 0x28C 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_14_XBAR1_INOUT06			0x048 0x28C 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_14_GPT5_CLK				0x048 0x28C 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_14_GPIO_MUX1_IO14			0x048 0x28C 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_14_FLEXIO1_D14			0x048 0x28C 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_15_SEMC_ADDR06			0x04C 0x290 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_15_XBAR1_INOUT07			0x04C 0x290 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_15_GPIO_MUX1_IO15			0x04C 0x290 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_15_FLEXIO1_D15			0x04C 0x290 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_15_GPIO7_IO15			0x04C 0x290 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_16_SEMC_ADDR07			0x050 0x294 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_16_XBAR1_INOUT08			0x050 0x294 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_16_GPIO_MUX1_IO16			0x050 0x294 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_16_FLEXIO1_D16			0x050 0x294 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_16_GPIO7_IO16			0x050 0x294 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_17_GPIO7_IO17			0x054 0x298 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_17_SEMC_ADDR08			0x054 0x298 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_17_FLEXPWM4_PWM3_A			0x054 0x298 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_17_TMR1_TIMER0			0x054 0x298 0x63C 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_17_GPIO_MUX1_IO17			0x054 0x298 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_17_FLEXIO1_D17			0x054 0x298 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_18_SEMC_ADDR09			0x058 0x29C 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_18_FLEXPWM4_PWM3_B			0x058 0x29C 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_18_TMR2_TIMER0			0x058 0x29C 0x648 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_18_GPIO_MUX1_IO18			0x058 0x29C 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_18_FLEXIO1_D18			0x058 0x29C 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_18_GPIO7_IO18			0x058 0x29C 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_19_SEMC_ADDR11			0x05C 0x2A0 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_19_FLEXPWM2_PWM3_A			0x05C 0x2A0 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_19_TMR3_TIMER0			0x05C 0x2A0 0x654 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_19_GPIO_MUX1_IO19			0x05C 0x2A0 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_19_FLEXIO1_D19			0x05C 0x2A0 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_19_GPIO7_IO19			0x05C 0x2A0 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_20_SEMC_ADDR12			0x060 0x2A4 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_20_FLEXPWM2_PWM3_B			0x060 0x2A4 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_20_TMR4_TIMER0			0x060 0x2A4 0x660 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_20_GPIO_MUX1_IO20			0x060 0x2A4 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_20_FLEXIO1_D20			0x060 0x2A4 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_20_GPIO7_IO20			0x060 0x2A4 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_21_GPIO7_IO21			0x064 0x2A8 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_21_SEMC_BA0				0x064 0x2A8 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_21_FLEXPWM3_PWM3_A			0x064 0x2A8 0x53C 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_21_GPIO_MUX1_IO21			0x064 0x2A8 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_21_FLEXIO1_D21			0x064 0x2A8 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_22_GPIO7_IO22			0x068 0x2AC 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_22_SEMC_BA1				0x068 0x2AC 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_22_FLEXPWM3_PWM3_B			0x068 0x2AC 0x54C 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_22_GPIO_MUX1_IO22			0x068 0x2AC 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_22_FLEXIO1_D22			0x068 0x2AC 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_23_SEMC_ADDR10			0x06C 0x2B0 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_23_FLEXPWM1_PWM0_A			0x06C 0x2B0 0x500 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_23_GPIO_MUX1_IO23			0x06C 0x2B0 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_23_FLEXIO1_D23			0x06C 0x2B0 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_23_GPIO7_IO23			0x06C 0x2B0 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_24_GPIO7_IO24			0x070 0x2B4 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_24_SEMC_CAS				0x070 0x2B4 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_24_FLEXPWM1_PWM0_B			0x070 0x2B4 0x50C 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_24_GPIO_MUX1_IO24			0x070 0x2B4 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_24_FLEXIO1_D24			0x070 0x2B4 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_25_GPIO7_IO25			0x074 0x2B8 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_25_SEMC_RAS				0x074 0x2B8 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_25_FLEXPWM1_PWM1_A			0x074 0x2B8 0x504 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_25_GPIO_MUX1_IO25			0x074 0x2B8 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_25_FLEXIO1_D25			0x074 0x2B8 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_26_SEMC_CLK				0x078 0x2BC 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_26_FLEXPWM1_PWM1_B			0x078 0x2BC 0x510 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_26_GPIO_MUX1_IO26			0x078 0x2BC 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_26_FLEXIO1_D26			0x078 0x2BC 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_26_GPIO7_IO26			0x078 0x2BC 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_27_GPIO7_IO27			0x07C 0x2C0 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_27_SEMC_CKE				0x07C 0x2C0 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_27_FLEXPWM1_PWM2_A			0x07C 0x2C0 0x508 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_27_GPIO_MUX1_IO27			0x07C 0x2C0 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_27_FLEXIO1_D27			0x07C 0x2C0 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_28_GPIO7_IO28			0x080 0x2C4 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_28_SEMC_WE				0x080 0x2C4 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_28_FLEXPWM1_PWM2_B			0x080 0x2C4 0x514 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_28_GPIO_MUX1_IO28			0x080 0x2C4 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_28_FLEXIO1_D28			0x080 0x2C4 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_29_SEMC_CS0				0x084 0x2C8 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_29_FLEXPWM3_PWM0_A			0x084 0x2C8 0x530 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_29_GPIO_MUX1_IO29			0x084 0x2C8 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_29_FLEXIO1_D29			0x084 0x2C8 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_29_GPIO7_IO29			0x084 0x2C8 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_30_SEMC_DATA08			0x088 0x2CC 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_30_FLEXPWM3_PWM0_B			0x088 0x2CC 0x540 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_30_GPIO_MUX1_IO30			0x088 0x2CC 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_30_FLEXIO1_D30			0x088 0x2CC 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_30_GPIO7_IO30			0x088 0x2CC 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_31_GPIO7_IO31			0x08C 0x2D0 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_31_SEMC_DATA09			0x08C 0x2D0 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_31_FLEXPWM3_PWM1_A			0x08C 0x2D0 0x534 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_31_GPIO_MUX1_IO31			0x08C 0x2D0 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_31_FLEXIO1_D31			0x08C 0x2D0 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_32_GPIO8_IO00			0x090 0x2D4 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_32_SEMC_DATA10			0x090 0x2D4 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_32_FLEXPWM3_PWM1_B			0x090 0x2D4 0x544 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_32_GPIO_MUX2_IO00			0x090 0x2D4 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_EMC_B1_33_SEMC_DATA11			0x094 0x2D8 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_33_FLEXPWM3_PWM2_A			0x094 0x2D8 0x538 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_33_GPIO_MUX2_IO01			0x094 0x2D8 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_33_GPIO8_IO01			0x094 0x2D8 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_34_GPIO8_IO02			0x098 0x2DC 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_34_SEMC_DATA12			0x098 0x2DC 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_34_FLEXPWM3_PWM2_B			0x098 0x2DC 0x548 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_34_GPIO_MUX2_IO02			0x098 0x2DC 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_EMC_B1_35_GPIO8_IO03			0x09C 0x2E0 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_35_SEMC_DATA13			0x09C 0x2E0 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_35_XBAR1_INOUT09			0x09C 0x2E0 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_35_GPIO_MUX2_IO03			0x09C 0x2E0 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_EMC_B1_36_SEMC_DATA14			0x0A0 0x2E4 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_36_XBAR1_INOUT10			0x0A0 0x2E4 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_36_GPIO_MUX2_IO04			0x0A0 0x2E4 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_36_GPIO8_IO04			0x0A0 0x2E4 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_37_GPIO8_IO05			0x0A4 0x2E8 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_37_SEMC_DATA15			0x0A4 0x2E8 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_37_XBAR1_INOUT11			0x0A4 0x2E8 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_37_GPIO_MUX2_IO05			0x0A4 0x2E8 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_EMC_B1_38_GPIO8_IO06			0x0A8 0x2EC 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_38_SEMC_DM01				0x0A8 0x2EC 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_38_FLEXPWM1_PWM3_A			0x0A8 0x2EC 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_38_TMR1_TIMER1			0x0A8 0x2EC 0x640 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_38_GPIO_MUX2_IO06			0x0A8 0x2EC 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_EMC_B1_39_SEMC_DQS				0x0AC 0x2F0 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_39_FLEXPWM1_PWM3_B			0x0AC 0x2F0 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_39_TMR2_TIMER1			0x0AC 0x2F0 0x64C 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_39_GPIO_MUX2_IO07			0x0AC 0x2F0 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_39_GPIO8_IO07			0x0AC 0x2F0 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_40_SEMC_RDY				0x0B0 0x2F4 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_40_XBAR1_INOUT12			0x0B0 0x2F4 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_40_MQS_RIGHT				0x0B0 0x2F4 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_40_LPUART6_TXD			0x0B0 0x2F4 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B1_40_GPIO_MUX2_IO08			0x0B0 0x2F4 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_40_ENET_1G_MDC			0x0B0 0x2F4 0x0 0x7 0x0
+#define IOMUXC_GPIO_EMC_B1_40_CCM_CLKO1				0x0B0 0x2F4 0x0 0x9 0x0
+#define IOMUXC_GPIO_EMC_B1_40_GPIO8_IO08			0x0B0 0x2F4 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_41_GPIO8_IO09			0x0B4 0x2F8 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_41_SEMC_CSX00			0x0B4 0x2F8 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_41_XBAR1_INOUT13			0x0B4 0x2F8 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_41_MQS_LEFT				0x0B4 0x2F8 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_41_LPUART6_RXD			0x0B4 0x2F8 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B1_41_FLEXSPI2_B_DATA07			0x0B4 0x2F8 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B1_41_GPIO_MUX2_IO09			0x0B4 0x2F8 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_41_ENET_1G_MDIO			0x0B4 0x2F8 0x4C8 0x7 0x0
+#define IOMUXC_GPIO_EMC_B1_41_CCM_CLKO2				0x0B4 0x2F8 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_EMC_B2_00_SEMC_DATA16			0x0B8 0x2FC 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_00_CCM_ENET_REF_CLK_25M		0x0B8 0x2FC 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_00_TMR3_TIMER1			0x0B8 0x2FC 0x658 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_00_LPUART6_CTS_B			0x0B8 0x2FC 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_00_FLEXSPI2_B_DATA06			0x0B8 0x2FC 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_00_GPIO_MUX2_IO10			0x0B8 0x2FC 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_00_XBAR1_INOUT20			0x0B8 0x2FC 0x6D8 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_00_ENET_QOS_1588_EVENT1_OUT		0x0B8 0x2FC 0x0 0x7 0x0
+#define IOMUXC_GPIO_EMC_B2_00_LPSPI1_SCK			0x0B8 0x2FC 0x5D0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_00_LPI2C2_SCL			0x0B8 0x2FC 0x5B4 0x9 0x0
+#define IOMUXC_GPIO_EMC_B2_00_GPIO8_IO10			0x0B8 0x2FC 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_00_FLEXPWM3_PWM0_A			0x0B8 0x2FC 0x530 0xB 0x1
+
+#define IOMUXC_GPIO_EMC_B2_01_SEMC_DATA17			0x0BC 0x300 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_01_USDHC2_CD_B			0x0BC 0x300 0x6D0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_01_TMR4_TIMER1			0x0BC 0x300 0x664 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_01_LPUART6_RTS_B			0x0BC 0x300 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_01_FLEXSPI2_B_DATA05			0x0BC 0x300 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_01_GPIO_MUX2_IO11			0x0BC 0x300 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_01_XBAR1_INOUT21			0x0BC 0x300 0x6DC 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_01_ENET_QOS_1588_EVENT1_IN		0x0BC 0x300 0x0 0x7 0x0
+#define IOMUXC_GPIO_EMC_B2_01_LPSPI1_PCS0			0x0BC 0x300 0x5CC 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_01_LPI2C2_SDA			0x0BC 0x300 0x5B8 0x9 0x0
+#define IOMUXC_GPIO_EMC_B2_01_GPIO8_IO11			0x0BC 0x300 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_01_FLEXPWM3_PWM0_B			0x0BC 0x300 0x540 0xB 0x1
+
+#define IOMUXC_GPIO_EMC_B2_02_SEMC_DATA18			0x0C0 0x304 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_02_USDHC2_WP				0x0C0 0x304 0x6D4 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_02_VIDEO_MUX_CSI_DATA23		0x0C0 0x304 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_02_FLEXSPI2_B_DATA04			0x0C0 0x304 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_02_GPIO_MUX2_IO12			0x0C0 0x304 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_02_XBAR1_INOUT22			0x0C0 0x304 0x6E0 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_02_ENET_QOS_1588_EVENT1_AUX_IN	0x0C0 0x304 0x0 0x7 0x0
+#define IOMUXC_GPIO_EMC_B2_02_LPSPI1_SOUT			0x0C0 0x304 0x5D8 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_02_GPIO8_IO12			0x0C0 0x304 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_02_FLEXPWM3_PWM1_A			0x0C0 0x304 0x534 0xB 0x1
+
+#define IOMUXC_GPIO_EMC_B2_03_SEMC_DATA19			0x0C4 0x308 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_03_USDHC2_VSELECT			0x0C4 0x308 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_03_VIDEO_MUX_CSI_DATA22		0x0C4 0x308 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_03_FLEXSPI2_B_DATA03			0x0C4 0x308 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_03_GPIO_MUX2_IO13			0x0C4 0x308 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_03_XBAR1_INOUT23			0x0C4 0x308 0x6E4 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_03_ENET_1G_TX_DATA03			0x0C4 0x308 0x0 0x7 0x0
+#define IOMUXC_GPIO_EMC_B2_03_LPSPI1_SIN			0x0C4 0x308 0x5D4 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_03_GPIO8_IO13			0x0C4 0x308 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_03_FLEXPWM3_PWM1_B			0x0C4 0x308 0x544 0xB 0x1
+
+#define IOMUXC_GPIO_EMC_B2_04_SEMC_DATA20			0x0C8 0x30C 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_04_USDHC2_RESET_B			0x0C8 0x30C 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_04_SAI2_MCLK				0x0C8 0x30C 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_04_VIDEO_MUX_CSI_DATA21		0x0C8 0x30C 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_04_FLEXSPI2_B_DATA02			0x0C8 0x30C 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_04_GPIO_MUX2_IO14			0x0C8 0x30C 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_04_XBAR1_INOUT24			0x0C8 0x30C 0x6E8 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_04_ENET_1G_TX_DATA02			0x0C8 0x30C 0x0 0x7 0x0
+#define IOMUXC_GPIO_EMC_B2_04_LPSPI3_SCK			0x0C8 0x30C 0x600 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_04_GPIO8_IO14			0x0C8 0x30C 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_04_FLEXPWM3_PWM2_A			0x0C8 0x30C 0x538 0xB 0x1
+
+#define IOMUXC_GPIO_EMC_B2_05_SEMC_DATA21			0x0CC 0x310 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_05_GPT3_CLK				0x0CC 0x310 0x598 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_05_SAI2_RX_SYNC			0x0CC 0x310 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_05_VIDEO_MUX_CSI_DATA20		0x0CC 0x310 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_05_FLEXSPI2_B_DATA01			0x0CC 0x310 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_05_GPIO_MUX2_IO15			0x0CC 0x310 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_05_XBAR1_INOUT25			0x0CC 0x310 0x6EC 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_05_ENET_1G_RX_CLK			0x0CC 0x310 0x4CC 0x7 0x0
+#define IOMUXC_GPIO_EMC_B2_05_LPSPI3_PCS0			0x0CC 0x310 0x5F0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_05_PIT1_TRIGGER0			0x0CC 0x310 0x0 0x9 0x0
+#define IOMUXC_GPIO_EMC_B2_05_GPIO8_IO15			0x0CC 0x310 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_05_FLEXPWM3_PWM2_B			0x0CC 0x310 0x548 0xB 0x1
+
+#define IOMUXC_GPIO_EMC_B2_06_SEMC_DATA22			0x0D0 0x314 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_06_GPT3_CAPTURE1			0x0D0 0x314 0x590 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_06_GPIO8_IO16			0x0D0 0x314 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_06_SAI2_RX_BCLK			0x0D0 0x314 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_06_FLEXPWM3_PWM3_A			0x0D0 0x314 0x53C 0xB 0x1
+#define IOMUXC_GPIO_EMC_B2_06_VIDEO_MUX_CSI_DATA19		0x0D0 0x314 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_06_FLEXSPI2_B_DATA00			0x0D0 0x314 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_06_GPIO_MUX2_IO16			0x0D0 0x314 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_06_XBAR1_INOUT26			0x0D0 0x314 0x6F0 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_06_ENET_1G_TX_ER			0x0D0 0x314 0x0 0x7 0x0
+#define IOMUXC_GPIO_EMC_B2_06_LPSPI3_SOUT			0x0D0 0x314 0x608 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_06_PIT1_TRIGGER1			0x0D0 0x314 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_EMC_B2_07_SEMC_DATA23			0x0D4 0x318 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_07_GPT3_CAPTURE2			0x0D4 0x318 0x594 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_07_SAI2_RX_DATA			0x0D4 0x318 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_07_VIDEO_MUX_CSI_DATA18		0x0D4 0x318 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_07_FLEXSPI2_B_DQS			0x0D4 0x318 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_07_GPIO_MUX2_IO17			0x0D4 0x318 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_07_XBAR1_INOUT27			0x0D4 0x318 0x6F4 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_07_ENET_1G_RX_DATA03			0x0D4 0x318 0x4DC 0x7 0x0
+#define IOMUXC_GPIO_EMC_B2_07_LPSPI3_SIN			0x0D4 0x318 0x604 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_07_PIT1_TRIGGER2			0x0D4 0x318 0x0 0x9 0x0
+#define IOMUXC_GPIO_EMC_B2_07_GPIO8_IO17			0x0D4 0x318 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_07_FLEXPWM3_PWM3_B			0x0D4 0x318 0x54C 0xB 0x1
+
+#define IOMUXC_GPIO_EMC_B2_08_SEMC_DM02				0x0D8 0x31C 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_08_GPT3_COMPARE1			0x0D8 0x31C 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_08_SAI2_TX_DATA			0x0D8 0x31C 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_08_VIDEO_MUX_CSI_DATA17		0x0D8 0x31C 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_08_FLEXSPI2_B_SS0_B			0x0D8 0x31C 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_08_GPIO_MUX2_IO18			0x0D8 0x31C 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_08_XBAR1_INOUT28			0x0D8 0x31C 0x6F8 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_08_ENET_1G_RX_DATA02			0x0D8 0x31C 0x4D8 0x7 0x0
+#define IOMUXC_GPIO_EMC_B2_08_LPSPI3_PCS1			0x0D8 0x31C 0x5F4 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_08_PIT1_TRIGGER3			0x0D8 0x31C 0x0 0x9 0x0
+#define IOMUXC_GPIO_EMC_B2_08_GPIO8_IO18			0x0D8 0x31C 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B2_09_GPIO8_IO19			0x0DC 0x320 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_09_SEMC_DATA24			0x0DC 0x320 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_09_GPT3_COMPARE2			0x0DC 0x320 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_09_SAI2_TX_BCLK			0x0DC 0x320 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_09_VIDEO_MUX_CSI_DATA16		0x0DC 0x320 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_09_FLEXSPI2_B_SCLK			0x0DC 0x320 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_09_GPIO_MUX2_IO19			0x0DC 0x320 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_09_XBAR1_INOUT29			0x0DC 0x320 0x6FC 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_09_ENET_1G_CRS			0x0DC 0x320 0x0 0x7 0x0
+#define IOMUXC_GPIO_EMC_B2_09_LPSPI3_PCS2			0x0DC 0x320 0x5F8 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_09_TMR1_TIMER0			0x0DC 0x320 0x63C 0x9 0x1
+
+#define IOMUXC_GPIO_EMC_B2_10_GPIO8_IO20			0x0E0 0x324 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_10_SEMC_DATA25			0x0E0 0x324 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_10_GPT3_COMPARE3			0x0E0 0x324 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_10_SAI2_TX_SYNC			0x0E0 0x324 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_10_VIDEO_MUX_CSI_FIELD		0x0E0 0x324 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_10_FLEXSPI2_A_SCLK			0x0E0 0x324 0x58C 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_10_GPIO_MUX2_IO20			0x0E0 0x324 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_10_XBAR1_INOUT30			0x0E0 0x324 0x700 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_10_ENET_1G_COL			0x0E0 0x324 0x0 0x7 0x0
+#define IOMUXC_GPIO_EMC_B2_10_LPSPI3_PCS3			0x0E0 0x324 0x5FC 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_10_TMR1_TIMER1			0x0E0 0x324 0x640 0x9 0x1
+
+#define IOMUXC_GPIO_EMC_B2_11_SEMC_DATA26			0x0E4 0x328 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_11_SPDIF_IN				0x0E4 0x328 0x6B4 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_11_ENET_1G_TX_DATA00			0x0E4 0x328 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_11_SAI3_RX_SYNC			0x0E4 0x328 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_11_FLEXSPI2_A_SS0_B			0x0E4 0x328 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_11_GPIO_MUX2_IO21			0x0E4 0x328 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_11_XBAR1_INOUT31			0x0E4 0x328 0x704 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_11_EMVSIM1_IO			0x0E4 0x328 0x69C 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_11_TMR1_TIMER2			0x0E4 0x328 0x644 0x9 0x0
+#define IOMUXC_GPIO_EMC_B2_11_GPIO8_IO21			0x0E4 0x328 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B2_12_SEMC_DATA27			0x0E8 0x32C 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_12_SPDIF_OUT				0x0E8 0x32C 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_12_ENET_1G_TX_DATA01			0x0E8 0x32C 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_12_SAI3_RX_BCLK			0x0E8 0x32C 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_12_FLEXSPI2_A_DQS			0x0E8 0x32C 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_12_GPIO_MUX2_IO22			0x0E8 0x32C 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_12_XBAR1_INOUT32			0x0E8 0x32C 0x708 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_12_EMVSIM1_CLK			0x0E8 0x32C 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_12_TMR1_TIMER3			0x0E8 0x32C 0x0 0x9 0x0
+#define IOMUXC_GPIO_EMC_B2_12_GPIO8_IO22			0x0E8 0x32C 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B2_13_GPIO8_IO23			0x0EC 0x330 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_13_SEMC_DATA28			0x0EC 0x330 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_13_ENET_1G_TX_EN			0x0EC 0x330 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_13_SAI3_RX_DATA			0x0EC 0x330 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_13_FLEXSPI2_A_DATA00			0x0EC 0x330 0x57C 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_13_GPIO_MUX2_IO23			0x0EC 0x330 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_13_XBAR1_INOUT33			0x0EC 0x330 0x70C 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_13_EMVSIM1_RST			0x0EC 0x330 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_13_TMR2_TIMER0			0x0EC 0x330 0x648 0x9 0x1
+
+#define IOMUXC_GPIO_EMC_B2_14_SEMC_DATA29			0x0F0 0x334 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_14_ENET_1G_TX_CLK_IO			0x0F0 0x334 0x4E8 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_14_SAI3_TX_DATA			0x0F0 0x334 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_14_FLEXSPI2_A_DATA01			0x0F0 0x334 0x580 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_14_GPIO_MUX2_IO24			0x0F0 0x334 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_14_XBAR1_INOUT34			0x0F0 0x334 0x710 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_14_SFA_ipp_do_atx_clk_under_test	0x0F0 0x334 0x0 0x7 0x0
+#define IOMUXC_GPIO_EMC_B2_14_EMVSIM1_SVEN			0x0F0 0x334 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_14_TMR2_TIMER1			0x0F0 0x334 0x64C 0x9 0x1
+#define IOMUXC_GPIO_EMC_B2_14_GPIO8_IO24			0x0F0 0x334 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B2_15_SEMC_DATA30			0x0F4 0x338 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_15_ENET_1G_RX_DATA00			0x0F4 0x338 0x4D0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_15_SAI3_TX_BCLK			0x0F4 0x338 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_15_FLEXSPI2_A_DATA02			0x0F4 0x338 0x584 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_15_GPIO_MUX2_IO25			0x0F4 0x338 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_15_XBAR1_INOUT35			0x0F4 0x338 0x714 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_15_EMVSIM1_PD			0x0F4 0x338 0x6A0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_15_TMR2_TIMER2			0x0F4 0x338 0x650 0x9 0x0
+#define IOMUXC_GPIO_EMC_B2_15_GPIO8_IO25			0x0F4 0x338 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B2_16_GPIO8_IO26			0x0F8 0x33C 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_16_SEMC_DATA31			0x0F8 0x33C 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_16_XBAR1_INOUT14			0x0F8 0x33C 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_16_ENET_1G_RX_DATA01			0x0F8 0x33C 0x4D4 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_16_SAI3_TX_SYNC			0x0F8 0x33C 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_16_FLEXSPI2_A_DATA03			0x0F8 0x33C 0x588 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_16_GPIO_MUX2_IO26			0x0F8 0x33C 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_16_EMVSIM1_POWER_FAIL		0x0F8 0x33C 0x6A4 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_16_TMR2_TIMER3			0x0F8 0x33C 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_EMC_B2_17_SEMC_DM03				0x0FC 0x340 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_17_XBAR1_INOUT15			0x0FC 0x340 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_17_ENET_1G_RX_EN			0x0FC 0x340 0x4E0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_17_SAI3_MCLK				0x0FC 0x340 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_17_FLEXSPI2_A_DATA04			0x0FC 0x340 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_17_GPIO_MUX2_IO27			0x0FC 0x340 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_17_WDOG1_ANY				0x0FC 0x340 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_17_TMR3_TIMER0			0x0FC 0x340 0x654 0x9 0x1
+#define IOMUXC_GPIO_EMC_B2_17_GPIO8_IO27			0x0FC 0x340 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B2_18_SEMC_DQS4				0x100 0x344 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_18_XBAR1_INOUT16			0x100 0x344 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_18_ENET_1G_RX_ER			0x100 0x344 0x4E4 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_18_EWM_OUT_B				0x100 0x344 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_18_FLEXSPI2_A_DATA05			0x100 0x344 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_18_GPIO_MUX2_IO28			0x100 0x344 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_18_FLEXSPI1_A_DQS			0x100 0x344 0x550 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_18_WDOG1_B				0x100 0x344 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_18_TMR3_TIMER1			0x100 0x344 0x658 0x9 0x1
+#define IOMUXC_GPIO_EMC_B2_18_GPIO8_IO28			0x100 0x344 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B2_19_GPIO8_IO29			0x104 0x348 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_19_SEMC_CLKX00			0x104 0x348 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_19_ENET_MDC				0x104 0x348 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_19_ENET_1G_MDC			0x104 0x348 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_19_ENET_1G_REF_CLK			0x104 0x348 0x4C4 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_19_FLEXSPI2_A_DATA06			0x104 0x348 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_19_GPIO_MUX2_IO29			0x104 0x348 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_19_ENET_QOS_MDC			0x104 0x348 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_19_TMR3_TIMER2			0x104 0x348 0x65C 0x9 0x0
+
+#define IOMUXC_GPIO_EMC_B2_20_GPIO8_IO30			0x108 0x34C 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_20_SEMC_CLKX01			0x108 0x34C 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_20_ENET_MDIO				0x108 0x34C 0x4AC 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_20_ENET_1G_MDIO			0x108 0x34C 0x4C8 0x2 0x1
+#define IOMUXC_GPIO_EMC_B2_20_ENET_QOS_REF_CLK			0x108 0x34C 0x4A0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_20_FLEXSPI2_A_DATA07			0x108 0x34C 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_20_GPIO_MUX2_IO30			0x108 0x34C 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_20_ENET_QOS_MDIO			0x108 0x34C 0x4EC 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_20_TMR3_TIMER3			0x108 0x34C 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_AD_00_GPIO8_IO31				0x10C 0x350 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_00_EMVSIM1_IO				0x10C 0x350 0x69C 0x0 0x1
+#define IOMUXC_GPIO_AD_00_FLEXCAN2_TX				0x10C 0x350 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_00_ENET_1G_1588_EVENT1_IN		0x10C 0x350 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_00_GPT2_CAPTURE1				0x10C 0x350 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_00_FLEXPWM1_PWM0_A			0x10C 0x350 0x500 0x4 0x1
+#define IOMUXC_GPIO_AD_00_GPIO_MUX2_IO31			0x10C 0x350 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_00_LPUART7_TXD				0x10C 0x350 0x630 0x6 0x0
+#define IOMUXC_GPIO_AD_00_FLEXIO2_D00				0x10C 0x350 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_00_FLEXSPI2_B_SS1_B			0x10C 0x350 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_AD_01_GPIO9_IO00				0x110 0x354 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_01_EMVSIM1_CLK				0x110 0x354 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_01_FLEXCAN2_RX				0x110 0x354 0x49C 0x1 0x0
+#define IOMUXC_GPIO_AD_01_ENET_1G_1588_EVENT1_OUT		0x110 0x354 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_01_GPT2_CAPTURE2				0x110 0x354 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_01_FLEXPWM1_PWM0_B			0x110 0x354 0x50C 0x4 0x1
+#define IOMUXC_GPIO_AD_01_GPIO_MUX3_IO00			0x110 0x354 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_01_LPUART7_RXD				0x110 0x354 0x62C 0x6 0x0
+#define IOMUXC_GPIO_AD_01_FLEXIO2_D01				0x110 0x354 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_01_FLEXSPI2_A_SS1_B			0x110 0x354 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_AD_02_GPIO9_IO01				0x114 0x358 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_02_EMVSIM1_RST				0x114 0x358 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_02_LPUART7_CTS_B				0x114 0x358 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_02_ENET_1G_1588_EVENT2_IN		0x114 0x358 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_02_GPT2_COMPARE1				0x114 0x358 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_02_FLEXPWM1_PWM1_A			0x114 0x358 0x504 0x4 0x1
+#define IOMUXC_GPIO_AD_02_GPIO_MUX3_IO01			0x114 0x358 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_02_LPUART8_TXD				0x114 0x358 0x638 0x6 0x0
+#define IOMUXC_GPIO_AD_02_FLEXIO2_D02				0x114 0x358 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_02_VIDEO_MUX_EXT_DCIC1			0x114 0x358 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_AD_03_GPIO9_IO02				0x118 0x35C 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_03_EMVSIM1_SVEN				0x118 0x35C 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_03_LPUART7_RTS_B				0x118 0x35C 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_03_ENET_1G_1588_EVENT2_OUT		0x118 0x35C 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_03_GPT2_COMPARE2				0x118 0x35C 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_03_FLEXPWM1_PWM1_B			0x118 0x35C 0x510 0x4 0x1
+#define IOMUXC_GPIO_AD_03_GPIO_MUX3_IO02			0x118 0x35C 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_03_LPUART8_RXD				0x118 0x35C 0x634 0x6 0x0
+#define IOMUXC_GPIO_AD_03_FLEXIO2_D03				0x118 0x35C 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_03_VIDEO_MUX_EXT_DCIC2			0x118 0x35C 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_AD_04_EMVSIM1_PD				0x11C 0x360 0x6A0 0x0 0x1
+#define IOMUXC_GPIO_AD_04_LPUART8_CTS_B				0x11C 0x360 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_04_ENET_1G_1588_EVENT3_IN		0x11C 0x360 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_04_GPT2_COMPARE3				0x11C 0x360 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_04_FLEXPWM1_PWM2_A			0x11C 0x360 0x508 0x4 0x1
+#define IOMUXC_GPIO_AD_04_GPIO_MUX3_IO03			0x11C 0x360 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_04_WDOG1_B				0x11C 0x360 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_04_FLEXIO2_D04				0x11C 0x360 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_04_TMR4_TIMER0				0x11C 0x360 0x660 0x9 0x1
+#define IOMUXC_GPIO_AD_04_GPIO9_IO03				0x11C 0x360 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_AD_05_EMVSIM1_POWER_FAIL			0x120 0x364 0x6A4 0x0 0x1
+#define IOMUXC_GPIO_AD_05_LPUART8_RTS_B				0x120 0x364 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_05_ENET_1G_1588_EVENT3_OUT		0x120 0x364 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_05_GPT2_CLK				0x120 0x364 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_05_FLEXPWM1_PWM2_B			0x120 0x364 0x514 0x4 0x1
+#define IOMUXC_GPIO_AD_05_GPIO_MUX3_IO04			0x120 0x364 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_05_WDOG2_B				0x120 0x364 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_05_FLEXIO2_D05				0x120 0x364 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_05_TMR4_TIMER1				0x120 0x364 0x664 0x9 0x1
+#define IOMUXC_GPIO_AD_05_GPIO9_IO04				0x120 0x364 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_AD_06_USB_OTG2_OC				0x124 0x368 0x6B8 0x0 0x0
+#define IOMUXC_GPIO_AD_06_FLEXCAN1_TX				0x124 0x368 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_06_EMVSIM2_IO				0x124 0x368 0x6A8 0x2 0x0
+#define IOMUXC_GPIO_AD_06_GPT3_CAPTURE1				0x124 0x368 0x590 0x3 0x1
+#define IOMUXC_GPIO_AD_06_VIDEO_MUX_CSI_DATA15			0x124 0x368 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_06_GPIO_MUX3_IO05			0x124 0x368 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_06_ENET_1588_EVENT1_IN			0x124 0x368 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_06_FLEXIO2_D06				0x124 0x368 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_06_TMR4_TIMER2				0x124 0x368 0x668 0x9 0x0
+#define IOMUXC_GPIO_AD_06_GPIO9_IO05				0x124 0x368 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_06_FLEXPWM1_PWM0_X			0x124 0x368 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_07_USB_OTG2_PWR				0x128 0x36C 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_07_FLEXCAN1_RX				0x128 0x36C 0x498 0x1 0x0
+#define IOMUXC_GPIO_AD_07_EMVSIM2_CLK				0x128 0x36C 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_07_GPT3_CAPTURE2				0x128 0x36C 0x594 0x3 0x1
+#define IOMUXC_GPIO_AD_07_VIDEO_MUX_CSI_DATA14			0x128 0x36C 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_07_GPIO_MUX3_IO06			0x128 0x36C 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_07_ENET_1588_EVENT1_OUT			0x128 0x36C 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_07_FLEXIO2_D07				0x128 0x36C 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_07_TMR4_TIMER3				0x128 0x36C 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_07_GPIO9_IO06				0x128 0x36C 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_07_FLEXPWM1_PWM1_X			0x128 0x36C 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_08_USBPHY2_OTG_ID			0x12C 0x370 0x6C4 0x0 0x0
+#define IOMUXC_GPIO_AD_08_LPI2C1_SCL				0x12C 0x370 0x5AC 0x1 0x0
+#define IOMUXC_GPIO_AD_08_EMVSIM2_RST				0x12C 0x370 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_08_GPT3_COMPARE1				0x12C 0x370 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_08_VIDEO_MUX_CSI_DATA13			0x12C 0x370 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_08_GPIO_MUX3_IO07			0x12C 0x370 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_08_ENET_1588_EVENT2_IN			0x12C 0x370 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_08_FLEXIO2_D08				0x12C 0x370 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_08_GPIO9_IO07				0x12C 0x370 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_08_FLEXPWM1_PWM2_X			0x12C 0x370 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_09_USBPHY1_OTG_ID			0x130 0x374 0x6C0 0x0 0x0
+#define IOMUXC_GPIO_AD_09_LPI2C1_SDA				0x130 0x374 0x5B0 0x1 0x0
+#define IOMUXC_GPIO_AD_09_EMVSIM2_SVEN				0x130 0x374 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_09_GPT3_COMPARE2				0x130 0x374 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_09_VIDEO_MUX_CSI_DATA12			0x130 0x374 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_09_GPIO_MUX3_IO08			0x130 0x374 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_09_ENET_1588_EVENT2_OUT			0x130 0x374 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_09_FLEXIO2_D09				0x130 0x374 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_09_GPIO9_IO08				0x130 0x374 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_09_FLEXPWM1_PWM3_X			0x130 0x374 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_10_USB_OTG1_PWR				0x134 0x378 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_10_LPI2C1_SCLS				0x134 0x378 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_10_EMVSIM2_PD				0x134 0x378 0x6AC 0x2 0x0
+#define IOMUXC_GPIO_AD_10_GPT3_COMPARE3				0x134 0x378 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_10_VIDEO_MUX_CSI_DATA11			0x134 0x378 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_10_GPIO_MUX3_IO09			0x134 0x378 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_10_ENET_1588_EVENT3_IN			0x134 0x378 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_10_FLEXIO2_D10				0x134 0x378 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_10_GPIO9_IO09				0x134 0x378 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_10_FLEXPWM2_PWM0_X			0x134 0x378 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_11_USB_OTG1_OC				0x138 0x37C 0x6BC 0x0 0x0
+#define IOMUXC_GPIO_AD_11_LPI2C1_SDAS				0x138 0x37C 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_11_EMVSIM2_POWER_FAIL			0x138 0x37C 0x6B0 0x2 0x0
+#define IOMUXC_GPIO_AD_11_GPT3_CLK				0x138 0x37C 0x598 0x3 0x1
+#define IOMUXC_GPIO_AD_11_VIDEO_MUX_CSI_DATA10			0x138 0x37C 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_11_GPIO_MUX3_IO10			0x138 0x37C 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_11_ENET_1588_EVENT3_OUT			0x138 0x37C 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_11_FLEXIO2_D11				0x138 0x37C 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_11_GPIO9_IO10				0x138 0x37C 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_11_FLEXPWM2_PWM1_X			0x138 0x37C 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_12_SPDIF_LOCK				0x13C 0x380 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_12_LPI2C1_HREQ				0x13C 0x380 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_12_GPT1_CAPTURE1				0x13C 0x380 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_12_FLEXSPI1_B_DATA03			0x13C 0x380 0x570 0x3 0x0
+#define IOMUXC_GPIO_AD_12_VIDEO_MUX_CSI_PIXCLK			0x13C 0x380 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_12_GPIO_MUX3_IO11			0x13C 0x380 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_12_ENET_TX_DATA03			0x13C 0x380 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_12_FLEXIO2_D12				0x13C 0x380 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_12_EWM_OUT_B				0x13C 0x380 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_12_GPIO9_IO11				0x13C 0x380 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_12_FLEXPWM2_PWM2_X			0x13C 0x380 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_13_SPDIF_SR_CLK				0x140 0x384 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_13_PIT1_TRIGGER0				0x140 0x384 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_13_GPT1_CAPTURE2				0x140 0x384 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_13_FLEXSPI1_B_DATA02			0x140 0x384 0x56C 0x3 0x0
+#define IOMUXC_GPIO_AD_13_VIDEO_MUX_CSI_MCLK			0x140 0x384 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_13_GPIO_MUX3_IO12			0x140 0x384 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_13_ENET_TX_DATA02			0x140 0x384 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_13_FLEXIO2_D13				0x140 0x384 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_13_REF_CLK_32K				0x140 0x384 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_13_GPIO9_IO12				0x140 0x384 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_13_FLEXPWM2_PWM3_X			0x140 0x384 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_14_SPDIF_EXT_CLK				0x144 0x388 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_14_REF_CLK_24M				0x144 0x388 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_14_GPT1_COMPARE1				0x144 0x388 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_14_FLEXSPI1_B_DATA01			0x144 0x388 0x568 0x3 0x0
+#define IOMUXC_GPIO_AD_14_VIDEO_MUX_CSI_VSYNC			0x144 0x388 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_14_GPIO_MUX3_IO13			0x144 0x388 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_14_ENET_RX_CLK				0x144 0x388 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_14_FLEXIO2_D14				0x144 0x388 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_14_CCM_ENET_REF_CLK_25M			0x144 0x388 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_14_GPIO9_IO13				0x144 0x388 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_14_FLEXPWM3_PWM0_X			0x144 0x388 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_15_GPIO9_IO14				0x148 0x38C 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_15_FLEXPWM3_PWM1_X			0x148 0x38C 0x0 0xB 0x0
+#define IOMUXC_GPIO_AD_15_SPDIF_IN				0x148 0x38C 0x6B4 0x0 0x1
+#define IOMUXC_GPIO_AD_15_LPUART10_TXD				0x148 0x38C 0x628 0x1 0x0
+#define IOMUXC_GPIO_AD_15_GPT1_COMPARE2				0x148 0x38C 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_15_FLEXSPI1_B_DATA00			0x148 0x38C 0x564 0x3 0x0
+#define IOMUXC_GPIO_AD_15_VIDEO_MUX_CSI_HSYNC			0x148 0x38C 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_15_GPIO_MUX3_IO14			0x148 0x38C 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_15_ENET_TX_ER				0x148 0x38C 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_15_FLEXIO2_D15				0x148 0x38C 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_AD_16_SPDIF_OUT				0x14C 0x390 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_16_LPUART10_RXD				0x14C 0x390 0x624 0x1 0x0
+#define IOMUXC_GPIO_AD_16_GPT1_COMPARE3				0x14C 0x390 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_16_FLEXSPI1_B_SCLK			0x14C 0x390 0x578 0x3 0x0
+#define IOMUXC_GPIO_AD_16_VIDEO_MUX_CSI_DATA09			0x14C 0x390 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_16_GPIO_MUX3_IO15			0x14C 0x390 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_16_ENET_RX_DATA03			0x14C 0x390 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_16_FLEXIO2_D16				0x14C 0x390 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_16_ENET_1G_MDC				0x14C 0x390 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_16_GPIO9_IO15				0x14C 0x390 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_16_FLEXPWM3_PWM2_X			0x14C 0x390 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_17_SAI1_MCLK				0x150 0x394 0x66C 0x0 0x0
+#define IOMUXC_GPIO_AD_17_ACMP1_OUT				0x150 0x394 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_17_GPT1_CLK				0x150 0x394 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_17_FLEXSPI1_A_DQS			0x150 0x394 0x550 0x3 0x1
+#define IOMUXC_GPIO_AD_17_VIDEO_MUX_CSI_DATA08			0x150 0x394 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_17_GPIO_MUX3_IO16			0x150 0x394 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_17_ENET_RX_DATA02			0x150 0x394 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_17_FLEXIO2_D17				0x150 0x394 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_17_ENET_1G_MDIO				0x150 0x394 0x4C8 0x9 0x2
+#define IOMUXC_GPIO_AD_17_GPIO9_IO16				0x150 0x394 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_17_FLEXPWM3_PWM3_X			0x150 0x394 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_18_GPIO9_IO17				0x154 0x398 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_18_FLEXPWM4_PWM0_X			0x154 0x398 0x0 0xB 0x0
+#define IOMUXC_GPIO_AD_18_SAI1_RX_SYNC				0x154 0x398 0x678 0x0 0x0
+#define IOMUXC_GPIO_AD_18_ACMP2_OUT				0x154 0x398 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_18_LPSPI1_PCS1				0x154 0x398 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_18_FLEXSPI1_A_SS0_B			0x154 0x398 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_18_VIDEO_MUX_CSI_DATA07			0x154 0x398 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_18_GPIO_MUX3_IO17			0x154 0x398 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_18_ENET_CRS				0x154 0x398 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_18_FLEXIO2_D18				0x154 0x398 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_18_LPI2C2_SCL				0x154 0x398 0x5B4 0x9 0x1
+
+#define IOMUXC_GPIO_AD_19_SAI1_RX_BCLK				0x158 0x39C 0x670 0x0 0x0
+#define IOMUXC_GPIO_AD_19_ACMP3_OUT				0x158 0x39C 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_19_LPSPI1_PCS2				0x158 0x39C 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_19_FLEXSPI1_A_SCLK			0x158 0x39C 0x574 0x3 0x0
+#define IOMUXC_GPIO_AD_19_VIDEO_MUX_CSI_DATA06			0x158 0x39C 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_19_GPIO_MUX3_IO18			0x158 0x39C 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_19_ENET_COL				0x158 0x39C 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_19_FLEXIO2_D19				0x158 0x39C 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_19_LPI2C2_SDA				0x158 0x39C 0x5B8 0x9 0x1
+#define IOMUXC_GPIO_AD_19_GPIO9_IO18				0x158 0x39C 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_19_FLEXPWM4_PWM1_X			0x158 0x39C 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_20_SAI1_RX_DATA00			0x15C 0x3A0 0x674 0x0 0x0
+#define IOMUXC_GPIO_AD_20_ACMP4_OUT				0x15C 0x3A0 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_20_LPSPI1_PCS3				0x15C 0x3A0 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_20_FLEXSPI1_A_DATA00			0x15C 0x3A0 0x554 0x3 0x0
+#define IOMUXC_GPIO_AD_20_VIDEO_MUX_CSI_DATA05			0x15C 0x3A0 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_20_GPIO_MUX3_IO19			0x15C 0x3A0 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_20_KPP_ROW07				0x15C 0x3A0 0x5A8 0x6 0x0
+#define IOMUXC_GPIO_AD_20_FLEXIO2_D20				0x15C 0x3A0 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_20_ENET_QOS_1588_EVENT2_OUT		0x15C 0x3A0 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_20_GPIO9_IO19				0x15C 0x3A0 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_20_FLEXPWM4_PWM2_X			0x15C 0x3A0 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_21_SAI1_TX_DATA00			0x160 0x3A4 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_21_LPSPI2_PCS1				0x160 0x3A4 0x5E0 0x2 0x0
+#define IOMUXC_GPIO_AD_21_FLEXSPI1_A_DATA01			0x160 0x3A4 0x558 0x3 0x0
+#define IOMUXC_GPIO_AD_21_VIDEO_MUX_CSI_DATA04			0x160 0x3A4 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_21_GPIO_MUX3_IO20			0x160 0x3A4 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_21_KPP_COL07				0x160 0x3A4 0x5A0 0x6 0x0
+#define IOMUXC_GPIO_AD_21_FLEXIO2_D21				0x160 0x3A4 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_21_ENET_QOS_1588_EVENT2_IN		0x160 0x3A4 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_21_GPIO9_IO20				0x160 0x3A4 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_21_FLEXPWM4_PWM3_X			0x160 0x3A4 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_22_GPIO9_IO21				0x164 0x3A8 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_22_SAI1_TX_BCLK				0x164 0x3A8 0x67C 0x0 0x0
+#define IOMUXC_GPIO_AD_22_LPSPI2_PCS2				0x164 0x3A8 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_22_FLEXSPI1_A_DATA02			0x164 0x3A8 0x55C 0x3 0x0
+#define IOMUXC_GPIO_AD_22_VIDEO_MUX_CSI_DATA03			0x164 0x3A8 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_22_GPIO_MUX3_IO21			0x164 0x3A8 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_22_KPP_ROW06				0x164 0x3A8 0x5A4 0x6 0x0
+#define IOMUXC_GPIO_AD_22_FLEXIO2_D22				0x164 0x3A8 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_22_ENET_QOS_1588_EVENT3_OUT		0x164 0x3A8 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_AD_23_SAI1_TX_SYNC				0x168 0x3AC 0x680 0x0 0x0
+#define IOMUXC_GPIO_AD_23_LPSPI2_PCS3				0x168 0x3AC 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_23_FLEXSPI1_A_DATA03			0x168 0x3AC 0x560 0x3 0x0
+#define IOMUXC_GPIO_AD_23_VIDEO_MUX_CSI_DATA02			0x168 0x3AC 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_23_GPIO_MUX3_IO22			0x168 0x3AC 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_23_KPP_COL06				0x168 0x3AC 0x59C 0x6 0x0
+#define IOMUXC_GPIO_AD_23_FLEXIO2_D23				0x168 0x3AC 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_23_ENET_QOS_1588_EVENT3_IN		0x168 0x3AC 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_23_GPIO9_IO22				0x168 0x3AC 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_AD_24_LPUART1_TXD				0x16C 0x3B0 0x620 0x0 0x0
+#define IOMUXC_GPIO_AD_24_LPSPI2_SCK				0x16C 0x3B0 0x5E4 0x1 0x0
+#define IOMUXC_GPIO_AD_24_VIDEO_MUX_CSI_DATA00			0x16C 0x3B0 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_24_ENET_RX_EN				0x16C 0x3B0 0x4B8 0x3 0x0
+#define IOMUXC_GPIO_AD_24_FLEXPWM2_PWM0_A			0x16C 0x3B0 0x518 0x4 0x1
+#define IOMUXC_GPIO_AD_24_GPIO_MUX3_IO23			0x16C 0x3B0 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_24_KPP_ROW05				0x16C 0x3B0 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_24_FLEXIO2_D24				0x16C 0x3B0 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_24_LPI2C4_SCL				0x16C 0x3B0 0x5C4 0x9 0x0
+#define IOMUXC_GPIO_AD_24_GPIO9_IO23				0x16C 0x3B0 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_AD_25_GPIO9_IO24				0x170 0x3B4 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_25_LPUART1_RXD				0x170 0x3B4 0x61C 0x0 0x0
+#define IOMUXC_GPIO_AD_25_LPSPI2_PCS0				0x170 0x3B4 0x5DC 0x1 0x0
+#define IOMUXC_GPIO_AD_25_VIDEO_MUX_CSI_DATA01			0x170 0x3B4 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_25_ENET_RX_ER				0x170 0x3B4 0x4BC 0x3 0x0
+#define IOMUXC_GPIO_AD_25_FLEXPWM2_PWM0_B			0x170 0x3B4 0x524 0x4 0x1
+#define IOMUXC_GPIO_AD_25_GPIO_MUX3_IO24			0x170 0x3B4 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_25_KPP_COL05				0x170 0x3B4 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_25_FLEXIO2_D25				0x170 0x3B4 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_25_LPI2C4_SDA				0x170 0x3B4 0x5C8 0x9 0x0
+
+#define IOMUXC_GPIO_AD_26_LPUART1_CTS_B				0x174 0x3B8 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_26_LPSPI2_SOUT				0x174 0x3B8 0x5EC 0x1 0x0
+#define IOMUXC_GPIO_AD_26_SEMC_CSX01				0x174 0x3B8 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_26_ENET_RX_DATA00			0x174 0x3B8 0x4B0 0x3 0x0
+#define IOMUXC_GPIO_AD_26_FLEXPWM2_PWM1_A			0x174 0x3B8 0x51C 0x4 0x1
+#define IOMUXC_GPIO_AD_26_GPIO_MUX3_IO25			0x174 0x3B8 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_26_KPP_ROW04				0x174 0x3B8 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_26_FLEXIO2_D26				0x174 0x3B8 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_26_ENET_QOS_MDC				0x174 0x3B8 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_26_GPIO9_IO25				0x174 0x3B8 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_26_USDHC2_CD_B				0x174 0x3B8 0x6D0 0xB 0x1
+
+#define IOMUXC_GPIO_AD_27_LPUART1_RTS_B				0x178 0x3BC 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_27_LPSPI2_SIN				0x178 0x3BC 0x5E8 0x1 0x0
+#define IOMUXC_GPIO_AD_27_SEMC_CSX02				0x178 0x3BC 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_27_ENET_RX_DATA01			0x178 0x3BC 0x4B4 0x3 0x0
+#define IOMUXC_GPIO_AD_27_FLEXPWM2_PWM1_B			0x178 0x3BC 0x528 0x4 0x1
+#define IOMUXC_GPIO_AD_27_GPIO_MUX3_IO26			0x178 0x3BC 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_27_KPP_COL04				0x178 0x3BC 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_27_FLEXIO2_D27				0x178 0x3BC 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_27_ENET_QOS_MDIO				0x178 0x3BC 0x4EC 0x9 0x1
+#define IOMUXC_GPIO_AD_27_GPIO9_IO26				0x178 0x3BC 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_27_USDHC2_WP				0x178 0x3BC 0x6D4 0xB 0x1
+
+#define IOMUXC_GPIO_AD_28_GPIO9_IO27				0x17C 0x3C0 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_28_USDHC2_VSELECT			0x17C 0x3C0 0x0 0xB 0x0
+#define IOMUXC_GPIO_AD_28_LPSPI1_SCK				0x17C 0x3C0 0x5D0 0x0 0x1
+#define IOMUXC_GPIO_AD_28_LPUART5_TXD				0x17C 0x3C0 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_28_SEMC_CSX03				0x17C 0x3C0 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_28_ENET_TX_EN				0x17C 0x3C0 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_28_FLEXPWM2_PWM2_A			0x17C 0x3C0 0x520 0x4 0x1
+#define IOMUXC_GPIO_AD_28_GPIO_MUX3_IO27			0x17C 0x3C0 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_28_KPP_ROW03				0x17C 0x3C0 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_28_FLEXIO2_D28				0x17C 0x3C0 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_28_VIDEO_MUX_EXT_DCIC1			0x17C 0x3C0 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_AD_29_LPSPI1_PCS0				0x180 0x3C4 0x5CC 0x0 0x1
+#define IOMUXC_GPIO_AD_29_LPUART5_RXD				0x180 0x3C4 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_29_ENET_REF_CLK				0x180 0x3C4 0x4A8 0x2 0x0
+#define IOMUXC_GPIO_AD_29_ENET_TX_CLK				0x180 0x3C4 0x4C0 0x3 0x0
+#define IOMUXC_GPIO_AD_29_FLEXPWM2_PWM2_B			0x180 0x3C4 0x52C 0x4 0x1
+#define IOMUXC_GPIO_AD_29_GPIO_MUX3_IO28			0x180 0x3C4 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_29_KPP_COL03				0x180 0x3C4 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_29_FLEXIO2_D29				0x180 0x3C4 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_29_VIDEO_MUX_EXT_DCIC2			0x180 0x3C4 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_29_GPIO9_IO28				0x180 0x3C4 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_29_USDHC2_RESET_B			0x180 0x3C4 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_30_LPSPI1_SOUT				0x184 0x3C8 0x5D8 0x0 0x1
+#define IOMUXC_GPIO_AD_30_USB_OTG2_OC				0x184 0x3C8 0x6B8 0x1 0x1
+#define IOMUXC_GPIO_AD_30_FLEXCAN2_TX				0x184 0x3C8 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_30_ENET_TX_DATA00			0x184 0x3C8 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_30_LPUART3_TXD				0x184 0x3C8 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_30_GPIO_MUX3_IO29			0x184 0x3C8 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_30_KPP_ROW02				0x184 0x3C8 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_30_FLEXIO2_D30				0x184 0x3C8 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_30_WDOG2_RESET_B_DEB			0x184 0x3C8 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_30_GPIO9_IO29				0x184 0x3C8 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_AD_31_LPSPI1_SIN				0x188 0x3CC 0x5D4 0x0 0x1
+#define IOMUXC_GPIO_AD_31_USB_OTG2_PWR				0x188 0x3CC 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_31_FLEXCAN2_RX				0x188 0x3CC 0x49C 0x2 0x1
+#define IOMUXC_GPIO_AD_31_ENET_TX_DATA01			0x188 0x3CC 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_31_LPUART3_RXD				0x188 0x3CC 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_31_GPIO_MUX3_IO30			0x188 0x3CC 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_31_KPP_COL02				0x188 0x3CC 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_31_FLEXIO2_D31				0x188 0x3CC 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_31_WDOG1_RESET_B_DEB			0x188 0x3CC 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_31_GPIO9_IO30				0x188 0x3CC 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_AD_32_GPIO9_IO31				0x18C 0x3D0 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_32_LPI2C1_SCL				0x18C 0x3D0 0x5AC 0x0 0x1
+#define IOMUXC_GPIO_AD_32_USBPHY2_OTG_ID			0x18C 0x3D0 0x6C4 0x1 0x1
+#define IOMUXC_GPIO_AD_32_PGMC_PMIC_RDY				0x18C 0x3D0 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_32_ENET_MDC				0x18C 0x3D0 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_32_USDHC1_CD_B				0x18C 0x3D0 0x6C8 0x4 0x0
+#define IOMUXC_GPIO_AD_32_GPIO_MUX3_IO31			0x18C 0x3D0 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_32_KPP_ROW01				0x18C 0x3D0 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_32_LPUART10_TXD				0x18C 0x3D0 0x628 0x8 0x1
+#define IOMUXC_GPIO_AD_32_ENET_1G_MDC				0x18C 0x3D0 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_AD_33_LPI2C1_SDA				0x190 0x3D4 0x5B0 0x0 0x1
+#define IOMUXC_GPIO_AD_33_USBPHY1_OTG_ID			0x190 0x3D4 0x6C0 0x1 0x1
+#define IOMUXC_GPIO_AD_33_XBAR1_INOUT17				0x190 0x3D4 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_33_ENET_MDIO				0x190 0x3D4 0x4AC 0x3 0x1
+#define IOMUXC_GPIO_AD_33_USDHC1_WP				0x190 0x3D4 0x6CC 0x4 0x0
+#define IOMUXC_GPIO_AD_33_GPIO_MUX4_IO00			0x190 0x3D4 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_33_KPP_COL01				0x190 0x3D4 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_33_LPUART10_RXD				0x190 0x3D4 0x624 0x8 0x1
+#define IOMUXC_GPIO_AD_33_ENET_1G_MDIO				0x190 0x3D4 0x4C8 0x9 0x3
+#define IOMUXC_GPIO_AD_33_GPIO10_IO00				0x190 0x3D4 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_AD_34_ENET_1G_1588_EVENT0_IN		0x194 0x3D8 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_34_USB_OTG1_PWR				0x194 0x3D8 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_34_XBAR1_INOUT18				0x194 0x3D8 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_34_ENET_1588_EVENT0_IN			0x194 0x3D8 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_34_USDHC1_VSELECT			0x194 0x3D8 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_34_GPIO_MUX4_IO01			0x194 0x3D8 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_34_KPP_ROW00				0x194 0x3D8 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_34_LPUART10_CTS_B			0x194 0x3D8 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_34_WDOG1_ANY				0x194 0x3D8 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_34_GPIO10_IO01				0x194 0x3D8 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_AD_35_GPIO10_IO02				0x198 0x3DC 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_35_ENET_1G_1588_EVENT0_OUT		0x198 0x3DC 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_35_USB_OTG1_OC				0x198 0x3DC 0x6BC 0x1 0x1
+#define IOMUXC_GPIO_AD_35_XBAR1_INOUT19				0x198 0x3DC 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_35_ENET_1588_EVENT0_OUT			0x198 0x3DC 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_35_USDHC1_RESET_B			0x198 0x3DC 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_35_GPIO_MUX4_IO02			0x198 0x3DC 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_35_KPP_COL00				0x198 0x3DC 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_35_LPUART10_RTS_B			0x198 0x3DC 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_35_FLEXSPI1_B_SS1_B			0x198 0x3DC 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_SD_B1_00_USDHC1_CMD				0x19C 0x3E0 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B1_00_XBAR1_INOUT20			0x19C 0x3E0 0x6D8 0x2 0x1
+#define IOMUXC_GPIO_SD_B1_00_GPT4_CAPTURE1			0x19C 0x3E0 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B1_00_GPIO_MUX4_IO03			0x19C 0x3E0 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B1_00_FLEXSPI2_A_SS0_B			0x19C 0x3E0 0x0 0x6 0x0
+#define IOMUXC_GPIO_SD_B1_00_KPP_ROW07				0x19C 0x3E0 0x5A8 0x8 0x1
+#define IOMUXC_GPIO_SD_B1_00_GPIO10_IO03			0x19C 0x3E0 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_SD_B1_01_USDHC1_CLK				0x1A0 0x3E4 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B1_01_XBAR1_INOUT21			0x1A0 0x3E4 0x6DC 0x2 0x1
+#define IOMUXC_GPIO_SD_B1_01_GPT4_CAPTURE2			0x1A0 0x3E4 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B1_01_GPIO_MUX4_IO04			0x1A0 0x3E4 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B1_01_FLEXSPI2_A_SCLK			0x1A0 0x3E4 0x58C 0x6 0x1
+#define IOMUXC_GPIO_SD_B1_01_KPP_COL07				0x1A0 0x3E4 0x5A0 0x8 0x1
+#define IOMUXC_GPIO_SD_B1_01_GPIO10_IO04			0x1A0 0x3E4 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_SD_B1_02_GPIO10_IO05			0x1A4 0x3E8 0x0 0xA 0x0
+#define IOMUXC_GPIO_SD_B1_02_USDHC1_DATA0			0x1A4 0x3E8 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B1_02_XBAR1_INOUT22			0x1A4 0x3E8 0x6E0 0x2 0x1
+#define IOMUXC_GPIO_SD_B1_02_GPT4_COMPARE1			0x1A4 0x3E8 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B1_02_GPIO_MUX4_IO05			0x1A4 0x3E8 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B1_02_FLEXSPI2_A_DATA00			0x1A4 0x3E8 0x57C 0x6 0x1
+#define IOMUXC_GPIO_SD_B1_02_KPP_ROW06				0x1A4 0x3E8 0x5A4 0x8 0x1
+#define IOMUXC_GPIO_SD_B1_02_FLEXSPI1_A_SS1_B			0x1A4 0x3E8 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_SD_B1_03_USDHC1_DATA1			0x1A8 0x3EC 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B1_03_XBAR1_INOUT23			0x1A8 0x3EC 0x6E4 0x2 0x1
+#define IOMUXC_GPIO_SD_B1_03_GPT4_COMPARE2			0x1A8 0x3EC 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B1_03_GPIO_MUX4_IO06			0x1A8 0x3EC 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B1_03_FLEXSPI2_A_DATA01			0x1A8 0x3EC 0x580 0x6 0x1
+#define IOMUXC_GPIO_SD_B1_03_KPP_COL06				0x1A8 0x3EC 0x59C 0x8 0x1
+#define IOMUXC_GPIO_SD_B1_03_FLEXSPI1_B_SS1_B			0x1A8 0x3EC 0x0 0x9 0x0
+#define IOMUXC_GPIO_SD_B1_03_GPIO10_IO06			0x1A8 0x3EC 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_SD_B1_04_USDHC1_DATA2			0x1AC 0x3F0 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B1_04_XBAR1_INOUT24			0x1AC 0x3F0 0x6E8 0x2 0x1
+#define IOMUXC_GPIO_SD_B1_04_GPT4_COMPARE3			0x1AC 0x3F0 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B1_04_GPIO_MUX4_IO07			0x1AC 0x3F0 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B1_04_FLEXSPI2_A_DATA02			0x1AC 0x3F0 0x584 0x6 0x1
+#define IOMUXC_GPIO_SD_B1_04_FLEXSPI1_B_SS0_B			0x1AC 0x3F0 0x0 0x8 0x0
+#define IOMUXC_GPIO_SD_B1_04_ENET_QOS_1588_EVENT2_AUX_IN	0x1AC 0x3F0 0x0 0x9 0x0
+#define IOMUXC_GPIO_SD_B1_04_GPIO10_IO07			0x1AC 0x3F0 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_SD_B1_05_GPIO10_IO08			0x1B0 0x3F4 0x0 0xA 0x0
+#define IOMUXC_GPIO_SD_B1_05_USDHC1_DATA3			0x1B0 0x3F4 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B1_05_XBAR1_INOUT25			0x1B0 0x3F4 0x6EC 0x2 0x1
+#define IOMUXC_GPIO_SD_B1_05_GPT4_CLK				0x1B0 0x3F4 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B1_05_GPIO_MUX4_IO08			0x1B0 0x3F4 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B1_05_FLEXSPI2_A_DATA03			0x1B0 0x3F4 0x588 0x6 0x1
+#define IOMUXC_GPIO_SD_B1_05_FLEXSPI1_B_DQS			0x1B0 0x3F4 0x0 0x8 0x0
+#define IOMUXC_GPIO_SD_B1_05_ENET_QOS_1588_EVENT3_AUX_IN	0x1B0 0x3F4 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_SD_B2_00_GPIO10_IO09			0x1B4 0x3F8 0x0 0xA 0x0
+#define IOMUXC_GPIO_SD_B2_00_USDHC2_DATA3			0x1B4 0x3F8 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B2_00_FLEXSPI1_B_DATA03			0x1B4 0x3F8 0x570 0x1 0x1
+#define IOMUXC_GPIO_SD_B2_00_ENET_1G_RX_EN			0x1B4 0x3F8 0x4E0 0x2 0x1
+#define IOMUXC_GPIO_SD_B2_00_LPUART9_TXD			0x1B4 0x3F8 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B2_00_LPSPI4_SCK				0x1B4 0x3F8 0x610 0x4 0x0
+#define IOMUXC_GPIO_SD_B2_00_GPIO_MUX4_IO09			0x1B4 0x3F8 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SD_B2_01_USDHC2_DATA2			0x1B8 0x3FC 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B2_01_FLEXSPI1_B_DATA02			0x1B8 0x3FC 0x56C 0x1 0x1
+#define IOMUXC_GPIO_SD_B2_01_ENET_1G_RX_CLK			0x1B8 0x3FC 0x4CC 0x2 0x1
+#define IOMUXC_GPIO_SD_B2_01_LPUART9_RXD			0x1B8 0x3FC 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B2_01_LPSPI4_PCS0			0x1B8 0x3FC 0x60C 0x4 0x0
+#define IOMUXC_GPIO_SD_B2_01_GPIO_MUX4_IO10			0x1B8 0x3FC 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B2_01_GPIO10_IO10			0x1B8 0x3FC 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_SD_B2_02_GPIO10_IO11			0x1BC 0x400 0x0 0xA 0x0
+#define IOMUXC_GPIO_SD_B2_02_USDHC2_DATA1			0x1BC 0x400 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B2_02_FLEXSPI1_B_DATA01			0x1BC 0x400 0x568 0x1 0x1
+#define IOMUXC_GPIO_SD_B2_02_ENET_1G_RX_DATA00			0x1BC 0x400 0x4D0 0x2 0x1
+#define IOMUXC_GPIO_SD_B2_02_LPUART9_CTS_B			0x1BC 0x400 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B2_02_LPSPI4_SOUT			0x1BC 0x400 0x618 0x4 0x0
+#define IOMUXC_GPIO_SD_B2_02_GPIO_MUX4_IO11			0x1BC 0x400 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SD_B2_03_GPIO10_IO12			0x1C0 0x404 0x0 0xA 0x0
+#define IOMUXC_GPIO_SD_B2_03_USDHC2_DATA0			0x1C0 0x404 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B2_03_FLEXSPI1_B_DATA00			0x1C0 0x404 0x564 0x1 0x1
+#define IOMUXC_GPIO_SD_B2_03_ENET_1G_RX_DATA01			0x1C0 0x404 0x4D4 0x2 0x1
+#define IOMUXC_GPIO_SD_B2_03_LPUART9_RTS_B			0x1C0 0x404 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B2_03_LPSPI4_SIN				0x1C0 0x404 0x614 0x4 0x0
+#define IOMUXC_GPIO_SD_B2_03_GPIO_MUX4_IO12			0x1C0 0x404 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SD_B2_04_USDHC2_CLK				0x1C4 0x408 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B2_04_FLEXSPI1_B_SCLK			0x1C4 0x408 0x578 0x1 0x1
+#define IOMUXC_GPIO_SD_B2_04_ENET_1G_RX_DATA02			0x1C4 0x408 0x4D8 0x2 0x1
+#define IOMUXC_GPIO_SD_B2_04_FLEXSPI1_A_SS1_B			0x1C4 0x408 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B2_04_LPSPI4_PCS1			0x1C4 0x408 0x0 0x4 0x0
+#define IOMUXC_GPIO_SD_B2_04_GPIO_MUX4_IO13			0x1C4 0x408 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B2_04_GPIO10_IO13			0x1C4 0x408 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_SD_B2_05_GPIO10_IO14			0x1C8 0x40C 0x0 0xA 0x0
+#define IOMUXC_GPIO_SD_B2_05_USDHC2_CMD				0x1C8 0x40C 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B2_05_FLEXSPI1_A_DQS			0x1C8 0x40C 0x550 0x1 0x2
+#define IOMUXC_GPIO_SD_B2_05_ENET_1G_RX_DATA03			0x1C8 0x40C 0x4DC 0x2 0x1
+#define IOMUXC_GPIO_SD_B2_05_FLEXSPI1_B_SS0_B			0x1C8 0x40C 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B2_05_LPSPI4_PCS2			0x1C8 0x40C 0x0 0x4 0x0
+#define IOMUXC_GPIO_SD_B2_05_GPIO_MUX4_IO14			0x1C8 0x40C 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SD_B2_06_GPIO10_IO15			0x1CC 0x410 0x0 0xA 0x0
+#define IOMUXC_GPIO_SD_B2_06_USDHC2_RESET_B			0x1CC 0x410 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B2_06_FLEXSPI1_A_SS0_B			0x1CC 0x410 0x0 0x1 0x0
+#define IOMUXC_GPIO_SD_B2_06_ENET_1G_TX_DATA03			0x1CC 0x410 0x0 0x2 0x0
+#define IOMUXC_GPIO_SD_B2_06_LPSPI4_PCS3			0x1CC 0x410 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B2_06_GPT6_CAPTURE1			0x1CC 0x410 0x0 0x4 0x0
+#define IOMUXC_GPIO_SD_B2_06_GPIO_MUX4_IO15			0x1CC 0x410 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SD_B2_07_USDHC2_STROBE			0x1D0 0x414 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B2_07_FLEXSPI1_A_SCLK			0x1D0 0x414 0x574 0x1 0x1
+#define IOMUXC_GPIO_SD_B2_07_ENET_1G_TX_DATA02			0x1D0 0x414 0x0 0x2 0x0
+#define IOMUXC_GPIO_SD_B2_07_LPUART3_CTS_B			0x1D0 0x414 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B2_07_GPT6_CAPTURE2			0x1D0 0x414 0x0 0x4 0x0
+#define IOMUXC_GPIO_SD_B2_07_GPIO_MUX4_IO16			0x1D0 0x414 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B2_07_LPSPI2_SCK				0x1D0 0x414 0x5E4 0x6 0x1
+#define IOMUXC_GPIO_SD_B2_07_ENET_TX_ER				0x1D0 0x414 0x0 0x8 0x0
+#define IOMUXC_GPIO_SD_B2_07_ENET_QOS_REF_CLK			0x1D0 0x414 0x4A0 0x9 0x1
+#define IOMUXC_GPIO_SD_B2_07_GPIO10_IO16			0x1D0 0x414 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_SD_B2_08_GPIO10_IO17			0x1D4 0x418 0x0 0xA 0x0
+#define IOMUXC_GPIO_SD_B2_08_USDHC2_DATA4			0x1D4 0x418 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B2_08_FLEXSPI1_A_DATA00			0x1D4 0x418 0x554 0x1 0x1
+#define IOMUXC_GPIO_SD_B2_08_ENET_1G_TX_DATA01			0x1D4 0x418 0x0 0x2 0x0
+#define IOMUXC_GPIO_SD_B2_08_LPUART3_RTS_B			0x1D4 0x418 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B2_08_GPT6_COMPARE1			0x1D4 0x418 0x0 0x4 0x0
+#define IOMUXC_GPIO_SD_B2_08_GPIO_MUX4_IO17			0x1D4 0x418 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B2_08_LPSPI2_PCS0			0x1D4 0x418 0x5DC 0x6 0x1
+
+#define IOMUXC_GPIO_SD_B2_09_GPIO10_IO18			0x1D8 0x41C 0x0 0xA 0x0
+#define IOMUXC_GPIO_SD_B2_09_USDHC2_DATA5			0x1D8 0x41C 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B2_09_FLEXSPI1_A_DATA01			0x1D8 0x41C 0x558 0x1 0x1
+#define IOMUXC_GPIO_SD_B2_09_ENET_1G_TX_DATA00			0x1D8 0x41C 0x0 0x2 0x0
+#define IOMUXC_GPIO_SD_B2_09_LPUART5_CTS_B			0x1D8 0x41C 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B2_09_GPT6_COMPARE2			0x1D8 0x41C 0x0 0x4 0x0
+#define IOMUXC_GPIO_SD_B2_09_GPIO_MUX4_IO18			0x1D8 0x41C 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B2_09_LPSPI2_SOUT			0x1D8 0x41C 0x5EC 0x6 0x1
+
+#define IOMUXC_GPIO_SD_B2_10_GPIO10_IO19			0x1DC 0x420 0x0 0xA 0x0
+#define IOMUXC_GPIO_SD_B2_10_USDHC2_DATA6			0x1DC 0x420 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B2_10_FLEXSPI1_A_DATA02			0x1DC 0x420 0x55C 0x1 0x1
+#define IOMUXC_GPIO_SD_B2_10_ENET_1G_TX_EN			0x1DC 0x420 0x0 0x2 0x0
+#define IOMUXC_GPIO_SD_B2_10_LPUART5_RTS_B			0x1DC 0x420 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B2_10_GPT6_COMPARE3			0x1DC 0x420 0x0 0x4 0x0
+#define IOMUXC_GPIO_SD_B2_10_GPIO_MUX4_IO19			0x1DC 0x420 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B2_10_LPSPI2_SIN				0x1DC 0x420 0x5E8 0x6 0x1
+
+#define IOMUXC_GPIO_SD_B2_11_USDHC2_DATA7			0x1E0 0x424 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B2_11_FLEXSPI1_A_DATA03			0x1E0 0x424 0x560 0x1 0x1
+#define IOMUXC_GPIO_SD_B2_11_ENET_1G_TX_CLK_IO			0x1E0 0x424 0x4E8 0x2 0x1
+#define IOMUXC_GPIO_SD_B2_11_ENET_1G_REF_CLK			0x1E0 0x424 0x4C4 0x3 0x1
+#define IOMUXC_GPIO_SD_B2_11_GPT6_CLK				0x1E0 0x424 0x0 0x4 0x0
+#define IOMUXC_GPIO_SD_B2_11_GPIO_MUX4_IO20			0x1E0 0x424 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B2_11_LPSPI2_PCS1			0x1E0 0x424 0x5E0 0x6 0x1
+#define IOMUXC_GPIO_SD_B2_11_GPIO10_IO20			0x1E0 0x424 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B1_00_VIDEO_MUX_LCDIF_CLK		0x1E4 0x428 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B1_00_ENET_1G_RX_EN			0x1E4 0x428 0x4E0 0x1 0x2
+#define IOMUXC_GPIO_DISP_B1_00_TMR1_TIMER0			0x1E4 0x428 0x63C 0x3 0x2
+#define IOMUXC_GPIO_DISP_B1_00_XBAR1_INOUT26			0x1E4 0x428 0x6F0 0x4 0x1
+#define IOMUXC_GPIO_DISP_B1_00_GPIO_MUX4_IO21			0x1E4 0x428 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B1_00_ENET_QOS_RX_EN			0x1E4 0x428 0x4F8 0x8 0x0
+#define IOMUXC_GPIO_DISP_B1_00_GPIO10_IO21			0x1E4 0x428 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B1_01_VIDEO_MUX_LCDIF_ENABLE		0x1E8 0x42C 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B1_01_ENET_1G_RX_CLK			0x1E8 0x42C 0x4CC 0x1 0x2
+#define IOMUXC_GPIO_DISP_B1_01_ENET_1G_RX_ER			0x1E8 0x42C 0x4E4 0x2 0x1
+#define IOMUXC_GPIO_DISP_B1_01_TMR1_TIMER1			0x1E8 0x42C 0x640 0x3 0x2
+#define IOMUXC_GPIO_DISP_B1_01_XBAR1_INOUT27			0x1E8 0x42C 0x6F4 0x4 0x1
+#define IOMUXC_GPIO_DISP_B1_01_GPIO_MUX4_IO22			0x1E8 0x42C 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B1_01_ENET_QOS_RX_CLK			0x1E8 0x42C 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B1_01_ENET_QOS_RX_ER			0x1E8 0x42C 0x4FC 0x9 0x0
+#define IOMUXC_GPIO_DISP_B1_01_GPIO10_IO22			0x1E8 0x42C 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B1_02_GPIO10_IO23			0x1EC 0x430 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B1_02_VIDEO_MUX_LCDIF_HSYNC		0x1EC 0x430 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B1_02_ENET_1G_RX_DATA00		0x1EC 0x430 0x4D0 0x1 0x2
+#define IOMUXC_GPIO_DISP_B1_02_LPI2C3_SCL			0x1EC 0x430 0x5BC 0x2 0x0
+#define IOMUXC_GPIO_DISP_B1_02_TMR1_TIMER2			0x1EC 0x430 0x644 0x3 0x1
+#define IOMUXC_GPIO_DISP_B1_02_XBAR1_INOUT28			0x1EC 0x430 0x6F8 0x4 0x1
+#define IOMUXC_GPIO_DISP_B1_02_GPIO_MUX4_IO23			0x1EC 0x430 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B1_02_ENET_QOS_RX_DATA00		0x1EC 0x430 0x4F0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B1_02_LPUART1_TXD			0x1EC 0x430 0x620 0x9 0x1
+
+#define IOMUXC_GPIO_DISP_B1_03_VIDEO_MUX_LCDIF_VSYNC		0x1F0 0x434 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B1_03_ENET_1G_RX_DATA01		0x1F0 0x434 0x4D4 0x1 0x2
+#define IOMUXC_GPIO_DISP_B1_03_LPI2C3_SDA			0x1F0 0x434 0x5C0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B1_03_TMR2_TIMER0			0x1F0 0x434 0x648 0x3 0x2
+#define IOMUXC_GPIO_DISP_B1_03_XBAR1_INOUT29			0x1F0 0x434 0x6FC 0x4 0x1
+#define IOMUXC_GPIO_DISP_B1_03_GPIO_MUX4_IO24			0x1F0 0x434 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B1_03_ENET_QOS_RX_DATA01		0x1F0 0x434 0x4F4 0x8 0x0
+#define IOMUXC_GPIO_DISP_B1_03_LPUART1_RXD			0x1F0 0x434 0x61C 0x9 0x1
+#define IOMUXC_GPIO_DISP_B1_03_GPIO10_IO24			0x1F0 0x434 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B1_04_VIDEO_MUX_LCDIF_DATA00		0x1F4 0x438 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B1_04_ENET_1G_RX_DATA02		0x1F4 0x438 0x4D8 0x1 0x2
+#define IOMUXC_GPIO_DISP_B1_04_LPUART4_RXD			0x1F4 0x438 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B1_04_TMR2_TIMER1			0x1F4 0x438 0x64C 0x3 0x2
+#define IOMUXC_GPIO_DISP_B1_04_XBAR1_INOUT30			0x1F4 0x438 0x700 0x4 0x1
+#define IOMUXC_GPIO_DISP_B1_04_GPIO_MUX4_IO25			0x1F4 0x438 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B1_04_ENET_QOS_RX_DATA02		0x1F4 0x438 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B1_04_LPSPI3_SCK			0x1F4 0x438 0x600 0x9 0x1
+#define IOMUXC_GPIO_DISP_B1_04_GPIO10_IO25			0x1F4 0x438 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B1_05_GPIO10_IO26			0x1F8 0x43C 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B1_05_VIDEO_MUX_LCDIF_DATA01		0x1F8 0x43C 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B1_05_ENET_1G_RX_DATA03		0x1F8 0x43C 0x4DC 0x1 0x2
+#define IOMUXC_GPIO_DISP_B1_05_LPUART4_CTS_B			0x1F8 0x43C 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B1_05_TMR2_TIMER2			0x1F8 0x43C 0x650 0x3 0x1
+#define IOMUXC_GPIO_DISP_B1_05_XBAR1_INOUT31			0x1F8 0x43C 0x704 0x4 0x1
+#define IOMUXC_GPIO_DISP_B1_05_GPIO_MUX4_IO26			0x1F8 0x43C 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B1_05_ENET_QOS_RX_DATA03		0x1F8 0x43C 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B1_05_LPSPI3_SIN			0x1F8 0x43C 0x604 0x9 0x1
+
+#define IOMUXC_GPIO_DISP_B1_06_VIDEO_MUX_LCDIF_DATA02		0x1FC 0x440 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B1_06_ENET_1G_TX_DATA03		0x1FC 0x440 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B1_06_LPUART4_TXD			0x1FC 0x440 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B1_06_TMR3_TIMER0			0x1FC 0x440 0x654 0x3 0x2
+#define IOMUXC_GPIO_DISP_B1_06_XBAR1_INOUT32			0x1FC 0x440 0x708 0x4 0x1
+#define IOMUXC_GPIO_DISP_B1_06_GPIO_MUX4_IO27			0x1FC 0x440 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B1_06_SRC_BT_CFG00			0x1FC 0x440 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B1_06_ENET_QOS_TX_DATA03		0x1FC 0x440 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B1_06_LPSPI3_SOUT			0x1FC 0x440 0x608 0x9 0x1
+#define IOMUXC_GPIO_DISP_B1_06_GPIO10_IO27			0x1FC 0x440 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B1_07_VIDEO_MUX_LCDIF_DATA03		0x200 0x444 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B1_07_ENET_1G_TX_DATA02		0x200 0x444 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B1_07_LPUART4_RTS_B			0x200 0x444 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B1_07_TMR3_TIMER1			0x200 0x444 0x658 0x3 0x2
+#define IOMUXC_GPIO_DISP_B1_07_XBAR1_INOUT33			0x200 0x444 0x70C 0x4 0x1
+#define IOMUXC_GPIO_DISP_B1_07_GPIO_MUX4_IO28			0x200 0x444 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B1_07_SRC_BT_CFG01			0x200 0x444 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B1_07_ENET_QOS_TX_DATA02		0x200 0x444 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B1_07_LPSPI3_PCS0			0x200 0x444 0x5F0 0x9 0x1
+#define IOMUXC_GPIO_DISP_B1_07_GPIO10_IO28			0x200 0x444 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B1_08_GPIO10_IO29			0x204 0x448 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B1_08_VIDEO_MUX_LCDIF_DATA04		0x204 0x448 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B1_08_ENET_1G_TX_DATA01		0x204 0x448 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B1_08_USDHC1_CD_B			0x204 0x448 0x6C8 0x2 0x1
+#define IOMUXC_GPIO_DISP_B1_08_TMR3_TIMER2			0x204 0x448 0x65C 0x3 0x1
+#define IOMUXC_GPIO_DISP_B1_08_XBAR1_INOUT34			0x204 0x448 0x710 0x4 0x1
+#define IOMUXC_GPIO_DISP_B1_08_GPIO_MUX4_IO29			0x204 0x448 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B1_08_SRC_BT_CFG02			0x204 0x448 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B1_08_ENET_QOS_TX_DATA01		0x204 0x448 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B1_08_LPSPI3_PCS1			0x204 0x448 0x5F4 0x9 0x1
+
+#define IOMUXC_GPIO_DISP_B1_09_VIDEO_MUX_LCDIF_DATA05		0x208 0x44C 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B1_09_ENET_1G_TX_DATA00		0x208 0x44C 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B1_09_USDHC1_WP			0x208 0x44C 0x6CC 0x2 0x1
+#define IOMUXC_GPIO_DISP_B1_09_TMR4_TIMER0			0x208 0x44C 0x660 0x3 0x2
+#define IOMUXC_GPIO_DISP_B1_09_XBAR1_INOUT35			0x208 0x44C 0x714 0x4 0x1
+#define IOMUXC_GPIO_DISP_B1_09_GPIO_MUX4_IO30			0x208 0x44C 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B1_09_SRC_BT_CFG03			0x208 0x44C 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B1_09_ENET_QOS_TX_DATA00		0x208 0x44C 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B1_09_LPSPI3_PCS2			0x208 0x44C 0x5F8 0x9 0x1
+#define IOMUXC_GPIO_DISP_B1_09_GPIO10_IO30			0x208 0x44C 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B1_10_VIDEO_MUX_LCDIF_DATA06		0x20C 0x450 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B1_10_ENET_1G_TX_EN			0x20C 0x450 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B1_10_USDHC1_RESET_B			0x20C 0x450 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B1_10_TMR4_TIMER1			0x20C 0x450 0x664 0x3 0x2
+#define IOMUXC_GPIO_DISP_B1_10_XBAR1_INOUT36			0x20C 0x450 0x0 0x4 0x0
+#define IOMUXC_GPIO_DISP_B1_10_GPIO_MUX4_IO31			0x20C 0x450 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B1_10_SRC_BT_CFG04			0x20C 0x450 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B1_10_ENET_QOS_TX_EN			0x20C 0x450 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B1_10_LPSPI3_PCS3			0x20C 0x450 0x5FC 0x9 0x1
+#define IOMUXC_GPIO_DISP_B1_10_GPIO10_IO31			0x20C 0x450 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B1_11_VIDEO_MUX_LCDIF_DATA07		0x210 0x454 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B1_11_ENET_1G_TX_CLK_IO		0x210 0x454 0x4E8 0x1 0x2
+#define IOMUXC_GPIO_DISP_B1_11_ENET_1G_REF_CLK			0x210 0x454 0x4C4 0x2 0x2
+#define IOMUXC_GPIO_DISP_B1_11_TMR4_TIMER2			0x210 0x454 0x668 0x3 0x1
+#define IOMUXC_GPIO_DISP_B1_11_XBAR1_INOUT37			0x210 0x454 0x0 0x4 0x0
+#define IOMUXC_GPIO_DISP_B1_11_GPIO_MUX5_IO00			0x210 0x454 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B1_11_SRC_BT_CFG05			0x210 0x454 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B1_11_ENET_QOS_TX_CLK			0x210 0x454 0x4A4 0x8 0x0
+#define IOMUXC_GPIO_DISP_B1_11_ENET_QOS_REF_CLK			0x210 0x454 0x4A0 0x9 0x2
+#define IOMUXC_GPIO_DISP_B1_11_GPIO11_IO00			0x210 0x454 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B2_00_GPIO11_IO01			0x214 0x458 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B2_00_VIDEO_MUX_LCDIF_DATA08		0x214 0x458 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_00_WDOG1_B				0x214 0x458 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B2_00_MQS_RIGHT			0x214 0x458 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B2_00_ENET_1G_TX_ER			0x214 0x458 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_00_SAI1_TX_DATA03			0x214 0x458 0x0 0x4 0x0
+#define IOMUXC_GPIO_DISP_B2_00_GPIO_MUX5_IO01			0x214 0x458 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_00_SRC_BT_CFG06			0x214 0x458 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B2_00_ENET_QOS_TX_ER			0x214 0x458 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_DISP_B2_01_VIDEO_MUX_LCDIF_DATA09		0x218 0x45C 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_01_USDHC1_VSELECT			0x218 0x45C 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B2_01_MQS_LEFT				0x218 0x45C 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B2_01_WDOG2_B				0x218 0x45C 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_01_SAI1_TX_DATA02			0x218 0x45C 0x0 0x4 0x0
+#define IOMUXC_GPIO_DISP_B2_01_GPIO_MUX5_IO02			0x218 0x45C 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_01_SRC_BT_CFG07			0x218 0x45C 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B2_01_EWM_OUT_B			0x218 0x45C 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B2_01_CCM_ENET_REF_CLK_25M		0x218 0x45C 0x0 0x9 0x0
+#define IOMUXC_GPIO_DISP_B2_01_GPIO11_IO02			0x218 0x45C 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B2_02_GPIO11_IO03			0x21C 0x460 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B2_02_VIDEO_MUX_LCDIF_DATA10		0x21C 0x460 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_02_ENET_TX_DATA00			0x21C 0x460 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B2_02_PIT1_TRIGGER3			0x21C 0x460 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B2_02_ARM_TRACE00			0x21C 0x460 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_02_SAI1_TX_DATA01			0x21C 0x460 0x0 0x4 0x0
+#define IOMUXC_GPIO_DISP_B2_02_GPIO_MUX5_IO03			0x21C 0x460 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_02_SRC_BT_CFG08			0x21C 0x460 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B2_02_ENET_QOS_TX_DATA00		0x21C 0x460 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_DISP_B2_03_GPIO11_IO04			0x220 0x464 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B2_03_VIDEO_MUX_LCDIF_DATA11		0x220 0x464 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_03_ENET_TX_DATA01			0x220 0x464 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B2_03_PIT1_TRIGGER2			0x220 0x464 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B2_03_ARM_TRACE01			0x220 0x464 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_03_SAI1_MCLK			0x220 0x464 0x66C 0x4 0x1
+#define IOMUXC_GPIO_DISP_B2_03_GPIO_MUX5_IO04			0x220 0x464 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_03_SRC_BT_CFG09			0x220 0x464 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B2_03_ENET_QOS_TX_DATA01		0x220 0x464 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_DISP_B2_04_VIDEO_MUX_LCDIF_DATA12		0x224 0x468 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_04_ENET_TX_EN			0x224 0x468 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B2_04_PIT1_TRIGGER1			0x224 0x468 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B2_04_ARM_TRACE02			0x224 0x468 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_04_SAI1_RX_SYNC			0x224 0x468 0x678 0x4 0x1
+#define IOMUXC_GPIO_DISP_B2_04_GPIO_MUX5_IO05			0x224 0x468 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_04_SRC_BT_CFG10			0x224 0x468 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B2_04_ENET_QOS_TX_EN			0x224 0x468 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B2_04_GPIO11_IO05			0x224 0x468 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B2_05_GPIO11_IO06			0x228 0x46C 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B2_05_VIDEO_MUX_LCDIF_DATA13		0x228 0x46C 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_05_ENET_TX_CLK			0x228 0x46C 0x4C0 0x1 0x1
+#define IOMUXC_GPIO_DISP_B2_05_ENET_REF_CLK			0x228 0x46C 0x4A8 0x2 0x1
+#define IOMUXC_GPIO_DISP_B2_05_ARM_TRACE03			0x228 0x46C 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_05_SAI1_RX_BCLK			0x228 0x46C 0x670 0x4 0x1
+#define IOMUXC_GPIO_DISP_B2_05_GPIO_MUX5_IO06			0x228 0x46C 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_05_SRC_BT_CFG11			0x228 0x46C 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B2_05_ENET_QOS_TX_CLK			0x228 0x46C 0x4A4 0x8 0x1
+
+#define IOMUXC_GPIO_DISP_B2_06_GPIO11_IO07			0x22C 0x470 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B2_06_VIDEO_MUX_LCDIF_DATA14		0x22C 0x470 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_06_ENET_RX_DATA00			0x22C 0x470 0x4B0 0x1 0x1
+#define IOMUXC_GPIO_DISP_B2_06_LPUART7_TXD			0x22C 0x470 0x630 0x2 0x1
+#define IOMUXC_GPIO_DISP_B2_06_ARM_TRACE_CLK			0x22C 0x470 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_06_SAI1_RX_DATA00			0x22C 0x470 0x674 0x4 0x1
+#define IOMUXC_GPIO_DISP_B2_06_GPIO_MUX5_IO07			0x22C 0x470 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_06_ENET_QOS_RX_DATA00		0x22C 0x470 0x4F0 0x8 0x1
+
+#define IOMUXC_GPIO_DISP_B2_07_VIDEO_MUX_LCDIF_DATA15		0x230 0x474 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_07_ENET_RX_DATA01			0x230 0x474 0x4B4 0x1 0x1
+#define IOMUXC_GPIO_DISP_B2_07_LPUART7_RXD			0x230 0x474 0x62C 0x2 0x1
+#define IOMUXC_GPIO_DISP_B2_07_ARM_TRACE_SWO			0x230 0x474 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_07_SAI1_TX_DATA00			0x230 0x474 0x0 0x4 0x0
+#define IOMUXC_GPIO_DISP_B2_07_GPIO_MUX5_IO08			0x230 0x474 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_07_ENET_QOS_RX_DATA01		0x230 0x474 0x4F4 0x8 0x1
+#define IOMUXC_GPIO_DISP_B2_07_GPIO11_IO08			0x230 0x474 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B2_08_GPIO11_IO09			0x234 0x478 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B2_08_VIDEO_MUX_LCDIF_DATA16		0x234 0x478 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_08_ENET_RX_EN			0x234 0x478 0x4B8 0x1 0x1
+#define IOMUXC_GPIO_DISP_B2_08_LPUART8_TXD			0x234 0x478 0x638 0x2 0x1
+#define IOMUXC_GPIO_DISP_B2_08_ARM_CM7_EVENTO			0x234 0x478 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_08_SAI1_TX_BCLK			0x234 0x478 0x67C 0x4 0x1
+#define IOMUXC_GPIO_DISP_B2_08_GPIO_MUX5_IO09			0x234 0x478 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_08_ENET_QOS_RX_EN			0x234 0x478 0x4F8 0x8 0x1
+#define IOMUXC_GPIO_DISP_B2_08_LPUART1_TXD			0x234 0x478 0x620 0x9 0x2
+
+#define IOMUXC_GPIO_DISP_B2_09_GPIO11_IO10			0x238 0x47C 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B2_09_VIDEO_MUX_LCDIF_DATA17		0x238 0x47C 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_09_ENET_RX_ER			0x238 0x47C 0x4BC 0x1 0x1
+#define IOMUXC_GPIO_DISP_B2_09_LPUART8_RXD			0x238 0x47C 0x634 0x2 0x1
+#define IOMUXC_GPIO_DISP_B2_09_ARM_CM7_EVENTI			0x238 0x47C 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_09_SAI1_TX_SYNC			0x238 0x47C 0x680 0x4 0x1
+#define IOMUXC_GPIO_DISP_B2_09_GPIO_MUX5_IO10			0x238 0x47C 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_09_ENET_QOS_RX_ER			0x238 0x47C 0x4FC 0x8 0x1
+#define IOMUXC_GPIO_DISP_B2_09_LPUART1_RXD			0x238 0x47C 0x61C 0x9 0x2
+
+#define IOMUXC_GPIO_DISP_B2_10_GPIO11_IO11			0x23C 0x480 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B2_10_VIDEO_MUX_LCDIF_DATA18		0x23C 0x480 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_10_EMVSIM2_IO			0x23C 0x480 0x6A8 0x1 0x1
+#define IOMUXC_GPIO_DISP_B2_10_LPUART2_TXD			0x23C 0x480 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B2_10_WDOG2_RESET_B_DEB		0x23C 0x480 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_10_XBAR1_INOUT38			0x23C 0x480 0x0 0x4 0x0
+#define IOMUXC_GPIO_DISP_B2_10_GPIO_MUX5_IO11			0x23C 0x480 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_10_LPI2C3_SCL			0x23C 0x480 0x5BC 0x6 0x1
+#define IOMUXC_GPIO_DISP_B2_10_ENET_QOS_RX_ER			0x23C 0x480 0x4FC 0x8 0x2
+#define IOMUXC_GPIO_DISP_B2_10_SPDIF_IN				0x23C 0x480 0x6B4 0x9 0x2
+
+#define IOMUXC_GPIO_DISP_B2_11_VIDEO_MUX_LCDIF_DATA19		0x240 0x484 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_11_EMVSIM2_CLK			0x240 0x484 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B2_11_LPUART2_RXD			0x240 0x484 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B2_11_WDOG1_RESET_B_DEB		0x240 0x484 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_11_XBAR1_INOUT39			0x240 0x484 0x0 0x4 0x0
+#define IOMUXC_GPIO_DISP_B2_11_GPIO_MUX5_IO12			0x240 0x484 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_11_LPI2C3_SDA			0x240 0x484 0x5C0 0x6 0x1
+#define IOMUXC_GPIO_DISP_B2_11_ENET_QOS_CRS			0x240 0x484 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B2_11_SPDIF_OUT			0x240 0x484 0x0 0x9 0x0
+#define IOMUXC_GPIO_DISP_B2_11_GPIO11_IO12			0x240 0x484 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B2_12_GPIO11_IO13			0x244 0x488 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B2_12_VIDEO_MUX_LCDIF_DATA20		0x244 0x488 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_12_EMVSIM2_RST			0x244 0x488 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B2_12_FLEXCAN1_TX			0x244 0x488 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B2_12_LPUART2_CTS_B			0x244 0x488 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_12_XBAR1_INOUT40			0x244 0x488 0x0 0x4 0x0
+#define IOMUXC_GPIO_DISP_B2_12_GPIO_MUX5_IO13			0x244 0x488 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_12_LPI2C4_SCL			0x244 0x488 0x5C4 0x6 0x1
+#define IOMUXC_GPIO_DISP_B2_12_ENET_QOS_COL			0x244 0x488 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B2_12_LPSPI4_SCK			0x244 0x488 0x610 0x9 0x1
+
+#define IOMUXC_GPIO_DISP_B2_13_GPIO11_IO14			0x248 0x48C 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B2_13_VIDEO_MUX_LCDIF_DATA21		0x248 0x48C 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_13_EMVSIM2_SVEN			0x248 0x48C 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B2_13_FLEXCAN1_RX			0x248 0x48C 0x498 0x2 0x1
+#define IOMUXC_GPIO_DISP_B2_13_LPUART2_RTS_B			0x248 0x48C 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_13_ENET_REF_CLK			0x248 0x48C 0x4A8 0x4 0x2
+#define IOMUXC_GPIO_DISP_B2_13_GPIO_MUX5_IO14			0x248 0x48C 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_13_LPI2C4_SDA			0x248 0x48C 0x5C8 0x6 0x1
+#define IOMUXC_GPIO_DISP_B2_13_ENET_QOS_1588_EVENT0_OUT		0x248 0x48C 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B2_13_LPSPI4_SIN			0x248 0x48C 0x614 0x9 0x1
+
+#define IOMUXC_GPIO_DISP_B2_14_GPIO_MUX5_IO15			0x24C 0x490 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_14_FLEXCAN1_TX			0x24C 0x490 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B2_14_ENET_QOS_1588_EVENT0_IN		0x24C 0x490 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B2_14_LPSPI4_SOUT			0x24C 0x490 0x618 0x9 0x1
+#define IOMUXC_GPIO_DISP_B2_14_GPIO11_IO15			0x24C 0x490 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B2_14_VIDEO_MUX_LCDIF_DATA22		0x24C 0x490 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_14_EMVSIM2_PD			0x24C 0x490 0x6AC 0x1 0x1
+#define IOMUXC_GPIO_DISP_B2_14_WDOG2_B				0x24C 0x490 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B2_14_VIDEO_MUX_EXT_DCIC1		0x24C 0x490 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_14_ENET_1G_REF_CLK			0x24C 0x490 0x4C4 0x4 0x3
+
+#define IOMUXC_GPIO_DISP_B2_15_VIDEO_MUX_LCDIF_DATA23		0x250 0x494 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_15_EMVSIM2_POWER_FAIL		0x250 0x494 0x6B0 0x1 0x1
+#define IOMUXC_GPIO_DISP_B2_15_WDOG1_B				0x250 0x494 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B2_15_VIDEO_MUX_EXT_DCIC2		0x250 0x494 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_15_PIT1_TRIGGER0			0x250 0x494 0x0 0x4 0x0
+#define IOMUXC_GPIO_DISP_B2_15_GPIO_MUX5_IO16			0x250 0x494 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_15_FLEXCAN1_RX			0x250 0x494 0x498 0x6 0x2
+#define IOMUXC_GPIO_DISP_B2_15_ENET_QOS_1588_EVENT0_AUX_IN	0x250 0x494 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B2_15_LPSPI4_PCS0			0x250 0x494 0x60C 0x9 0x1
+#define IOMUXC_GPIO_DISP_B2_15_GPIO11_IO16			0x250 0x494 0x0 0xA 0x0
+
+#endif  /* _DT_BINDINGS_PINCTRL_IMXRT1170_PINFUNC_H */
diff --git a/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi b/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi
new file mode 100644
index 000000000000..65fde4f52587
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi
@@ -0,0 +1,582 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/ {
+	model = "TQ-Systems MBA6ULx Baseboard";
+
+	aliases {
+		mmc0 = &usdhc2;
+		mmc1 = &usdhc1;
+		rtc0 = &rtc0;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&reg_mba6ul_3v3>;
+		enable-gpios = <&expander_out0 4 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	beeper: beeper {
+		compatible = "gpio-beeper";
+		gpios = <&expander_out1 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio_buttons: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_buttons>;
+
+		button-1 {
+			label = "s14";
+			linux,code = <KEY_1>;
+			gpios = <&expander_in0 0 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button-2 {
+			label = "s6";
+			linux,code = <KEY_2>;
+			gpios = <&expander_in0 1 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button-3 {
+			label = "s7";
+			linux,code = <KEY_3>;
+			gpios = <&expander_in0 2 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		power-button {
+			label = "POWER";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		status = "okay";
+
+		led1 {
+			label = "led1";
+			gpios = <&expander_out1 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led2 {
+			label = "led2";
+			gpios = <&expander_out1 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_lcd_pwr: regulator-lcd-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-pwr";
+		gpio = <&expander_out0 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		status = "disabled";
+	};
+
+	reg_mba6ul_3v3: regulator-mba6ul-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "supply-mba6ul-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_mba6ul_5v0: regulator-mba6ul-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "supply-mba6ul-5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_mpcie: regulator-mpcie-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "mpcie-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&expander_out0 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		startup-delay-us = <500000>;
+		vin-supply = <&reg_mba6ul_3v3>;
+	};
+
+	reg_otg2vbus_5v0: regulator-otg2-vbus-5v0 {
+		compatible = "regulator-fixed";
+		gpio = <&expander_out1 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-name = "otg2-vbus-supply-5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_mpcie>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x6000000>;
+			linux,cma-default;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-tlv320aic32x4";
+		model = "tqm-tlv320aic32";
+		ssi-controller = <&sai1>;
+		audio-codec = <&tlv320aic32x4>;
+		audio-asrc = <&asrc>;
+		audio-routing =
+			"IN3_L", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"IN1_L", "Line In Jack",
+			"IN1_R", "Line In Jack",
+			"Line Out Jack", "LOL",
+			"Line Out Jack", "LOR";
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_mba6ul_3v3>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_mba6ul_3v3>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <768000000>;
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	num-cs = <1>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	phy-supply = <&reg_mba6ul_3v3>;
+	phy-reset-gpios = <&expander_out1 1 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <25>;
+	phy-reset-post-delay = <1>;
+	status = "okay";
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>, <&pinctrl_enet2_mdc>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	phy-supply = <&reg_mba6ul_3v3>;
+	phy-reset-gpios = <&expander_out1 2 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <25>;
+	phy-reset-post-delay = <1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			reg = <0>;
+			max-speed = <100>;
+		};
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			clocks = <&clks IMX6UL_CLK_ENET2_REF_125M>;
+			reg = <1>;
+			max-speed = <100>;
+		};
+	};
+};
+
+&i2c4 {
+	tlv320aic32x4: audio-codec@18 {
+		compatible = "ti,tlv320aic32x4";
+		reg = <0x18>;
+		clocks = <&clks IMX6UL_CLK_SAI1>;
+		clock-names = "mclk";
+		ldoin-supply = <&reg_mba6ul_3v3>;
+		iov-supply = <&reg_mba6ul_3v3>;
+	};
+
+	jc42: temperature-sensor@19 {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x19>;
+	};
+
+	expander_out0: gpio-expander@20 {
+		compatible = "nxp,pca9554";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_mba6ul_3v3>;
+	};
+
+	expander_in0: gpio-expander@21 {
+		compatible = "nxp,pca9554";
+		reg = <0x21>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_expander_in0>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_mba6ul_3v3>;
+
+		enet1_int-hog {
+			gpio-hog;
+			gpios = <6 0>;
+			input;
+		};
+
+		enet2_int-hog {
+			gpio-hog;
+			gpios = <7 0>;
+			input;
+		};
+	};
+
+	expander_out1: gpio-expander@22 {
+		compatible = "nxp,pca9554";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_mba6ul_3v3>;
+	};
+
+	analog_touch: touchscreen@41 {
+		compatible = "st,stmpe811";
+		reg = <0x41>;
+		interrupts = <21 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-parent = <&gpio4>;
+		status = "disabled";
+
+		touchscreen {
+			compatible = "st,stmpe-ts";
+			st,adc-freq = <1>;      /* 3.25 MHz ADC clock speed */
+			st,ave-ctrl = <3>;      /* 8 sample average control */
+			st,fraction-z = <7>;    /* 7 length fractional part in z */
+			/*
+			 * 50 mA typical 80 mA max touchscreen drivers
+			 * current limit value
+			 */
+			st,i-drive = <1>;
+			st,mod-12b = <1>;       /* 12-bit ADC */
+			st,ref-sel = <0>;       /* internal ADC reference */
+			st,sample-time = <4>;   /* ADC converstion time: 80 clocks */
+			st,settling = <3>;      /* 1 ms panel driver settling time */
+			st,touch-det-delay = <5>; /* 5 ms touch detect interrupt delay */
+		};
+	};
+
+	/* NXP SE97BTP with temperature sensor + eeprom */
+	se97b: eeprom@51 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+		vcc-supply = <&reg_mba6ul_3v3>;
+	};
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	assigned-clocks = <&clks IMX6UL_CLK_SAI1_SEL>,
+			  <&clks IMX6UL_CLK_SAI1>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <0>, <24000000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	/* for DTE mode, add below change */
+	/* fsl,dte-mode; */
+	/* pinctrl-0 = <&pinctrl_uart6dte>; */
+	uart-has-rtscts;
+	linux,rs485-enabled-at-boot-time;
+	rs485-rts-active-low;
+	rs485-rx-during-tx;
+	status = "okay";
+};
+
+/* otg-port */
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1>;
+	power-active-high;
+	over-current-active-low;
+	/* we implement only dual role but not a fully featured OTG */
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+/* 7-port usb hub */
+/* id, pwr, oc pins not connected */
+&usbotg2 {
+	disable-over-current;
+	vbus-supply = <&reg_otg2vbus_5v0>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_mba6ul_3v3>;
+	vqmmc-supply = <&reg_vccsd>;
+	no-1-8-v;
+	no-mmc;
+	no-sdio;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog1>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_buttons: buttonsgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0x100b0
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK	0x1b020
+			MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO	0x1b020
+			MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI	0x1b020
+			MX6UL_PAD_UART4_RX_DATA__ECSPI2_SS0	0x1b020
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b0a8
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0a0
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0a0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b0a8
+		>;
+	};
+
+	pinctrl_enet2_mdc: enet2mdcgrp {
+		fsl,pins = <
+			/* mdio */
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+		>;
+	};
+
+	pinctrl_expander_in0: expanderin0grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA02__GPIO4_IO23	0x1b0b1
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b020
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b020
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
+			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			/* 100 k PD, DSE 120 OHM, SPEED LO */
+			MX6UL_PAD_GPIO1_IO09__PWM2_OUT		0x00003050
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK	0x1b0b1
+			MX6UL_PAD_CSI_DATA04__SAI1_TX_SYNC	0x1b0b1
+			MX6UL_PAD_CSI_DATA07__SAI1_TX_DATA	0x1f0b8
+			MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA	0x110b0
+			MX6UL_PAD_CSI_DATA01__SAI1_MCLK		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_MCLK__UART6_DCE_TX	0x1b0b1
+			MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX	0x1b0b1
+			MX6UL_PAD_CSI_VSYNC__UART6_DCE_RTS	0x1b0b1
+			MX6UL_PAD_CSI_HSYNC__UART6_DCE_CTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart6dte: uart6dtegrp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_PIXCLK__UART6_DTE_TX	0x1b0b1
+			MX6UL_PAD_CSI_MCLK__UART6_DTE_RX	0x1b0b1
+			MX6UL_PAD_CSI_HSYNC__UART6_DTE_RTS	0x1b0b1
+			MX6UL_PAD_CSI_VSYNC__UART6_DTE_CTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_usb_otg1: usbotg1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x00017059
+			MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC	0x0001b0b0
+			MX6UL_PAD_GPIO1_IO04__USB_OTG1_PWR	0x0001b099
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x00017069
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x00017059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x00017059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x00017059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x00017059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x00017059
+			/* WP */
+			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x0001b099
+			/* CD */
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x0001b099
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x00017069
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x000170b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x000170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x000170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x000170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x000170b9
+			/* WP */
+			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x0001b099
+			/* CD */
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x0001b099
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x00017069
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x000170f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x000170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x000170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x000170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x000170f9
+			/* WP */
+			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x0001b099
+			/* CD */
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x0001b099
+		>;
+	};
+
+	pinctrl_wdog1: wdog1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO08__WDOG1_WDOG_B	0x0001b099
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/lpc/Makefile b/arch/arm/boot/dts/nxp/lpc/Makefile
new file mode 100644
index 000000000000..56b9a0ebb917
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/lpc/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_LPC18XX) += \
+	lpc4337-ciaa.dtb \
+	lpc4350-hitex-eval.dtb \
+	lpc4357-ea4357-devkit.dtb \
+	lpc4357-myd-lpc4357.dtb
+dtb-$(CONFIG_ARCH_LPC32XX) += \
+	lpc3250-ea3250.dtb \
+	lpc3250-phy3250.dtb
diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi
index 10b8249b8ab6..152e98cf0c4e 100644
--- a/arch/arm/boot/dts/lpc18xx.dtsi
+++ b/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi
@@ -11,7 +11,7 @@
  *
  */
 
-#include "armv7-m.dtsi"
+#include "../../armv7-m.dtsi"
 
 #include "dt-bindings/clock/lpc18xx-cgu.h"
 #include "dt-bindings/clock/lpc18xx-ccu.h"
@@ -74,7 +74,7 @@
 		sct_pwm: pwm@40000000 {
 			compatible = "nxp,lpc1850-sct-pwm";
 			reg = <0x40000000 0x1000>;
-			clocks =<&ccu1 CLK_CPU_SCT>;
+			clocks = <&ccu1 CLK_CPU_SCT>;
 			clock-names = "pwm";
 			resets = <&rgu 37>;
 			#pwm-cells = <3>;
@@ -100,28 +100,30 @@
 			memcpy-bus-width = <32>;
 		};
 
-		spifi: flash-controller@40003000 {
+		spifi: spi@40003000 {
 			compatible = "nxp,lpc1773-spifi";
 			reg = <0x40003000 0x1000>, <0x14000000 0x4000000>;
 			reg-names = "spifi", "flash";
 			interrupts = <30>;
 			clocks = <&ccu1 CLK_SPIFI>, <&ccu1 CLK_CPU_SPIFI>;
 			clock-names = "spifi", "reg";
+			#address-cells = <1>;
+			#size-cells = <0>;
 			resets = <&rgu 53>;
 			status = "disabled";
 		};
 
-		mmcsd: mmcsd@40004000 {
+		mmcsd: mmc@40004000 {
 			compatible = "snps,dw-mshc";
 			reg = <0x40004000 0x1000>;
 			interrupts = <6>;
-			clocks = <&ccu2 CLK_SDIO>, <&ccu1 CLK_CPU_SDIO>;
-			clock-names = "ciu", "biu";
+			clocks = <&ccu1 CLK_CPU_SDIO>, <&ccu2 CLK_SDIO>;
+			clock-names = "biu", "ciu";
 			resets = <&rgu 20>;
 			status = "disabled";
 		};
 
-		usb0: ehci@40006100 {
+		usb0: usb@40006100 {
 			compatible = "nxp,lpc1850-ehci", "generic-ehci";
 			reg = <0x40006100 0x100>;
 			interrupts = <8>;
@@ -133,7 +135,7 @@
 			status = "disabled";
 		};
 
-		usb1: ehci@40007100 {
+		usb1: usb@40007100 {
 			compatible = "nxp,lpc1850-ehci", "generic-ehci";
 			reg = <0x40007100 0x100>;
 			interrupts = <9>;
@@ -183,7 +185,7 @@
 			compatible = "nxp,lpc1850-dwmac", "snps,dwmac-3.611", "snps,dwmac";
 			reg = <0x40010000 0x2000>;
 			interrupts = <5>;
-			interrupt-names	= "macirq";
+			interrupt-names = "macirq";
 			clocks = <&ccu1 CLK_CPU_ETHERNET>;
 			clock-names = "stmmaceth";
 			resets = <&rgu 22>;
@@ -535,3 +537,7 @@
 		};
 	};
 };
+
+&nvic {
+	arm,num-irq-priority-bits = <3>;
+};
diff --git a/arch/arm/boot/dts/lpc3250-ea3250.dts b/arch/arm/boot/dts/nxp/lpc/lpc3250-ea3250.dts
index 63c6f17bb7c9..63c6f17bb7c9 100644
--- a/arch/arm/boot/dts/lpc3250-ea3250.dts
+++ b/arch/arm/boot/dts/nxp/lpc/lpc3250-ea3250.dts
diff --git a/arch/arm/boot/dts/lpc3250-phy3250.dts b/arch/arm/boot/dts/nxp/lpc/lpc3250-phy3250.dts
index 21a6d0bca1e8..21a6d0bca1e8 100644
--- a/arch/arm/boot/dts/lpc3250-phy3250.dts
+++ b/arch/arm/boot/dts/nxp/lpc/lpc3250-phy3250.dts
diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi
index c87066d6c995..2236901a0031 100644
--- a/arch/arm/boot/dts/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi
@@ -77,12 +77,13 @@
 			status = "disabled";
 		};
 
-		dma: dma@31000000 {
+		dma: dma-controller@31000000 {
 			compatible = "arm,pl080", "arm,primecell";
 			reg = <0x31000000 0x1000>;
 			interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk LPC32XX_CLK_DMA>;
 			clock-names = "apb_pclk";
+			#dma-cells = <2>;
 		};
 
 		usb {
@@ -94,7 +95,7 @@
 			/*
 			 * Enable either ohci or usbd (gadget)!
 			 */
-			ohci: ohci@0 {
+			ohci: usb@0 {
 				compatible = "nxp,ohci-nxp", "usb-ohci";
 				reg = <0x0 0x300>;
 				interrupt-parent = <&sic1>;
@@ -224,8 +225,8 @@
 				status = "disabled";
 			};
 
-			sd: sd@20098000 {
-				compatible = "arm,pl18x", "arm,primecell";
+			sd: mmc@20098000 {
+				compatible = "arm,pl180", "arm,primecell";
 				reg = <0x20098000 0x1000>;
 				interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
 					     <13 IRQ_TYPE_LEVEL_HIGH>;
@@ -298,11 +299,11 @@
 				clocks = <&clk LPC32XX_CLK_I2C2>;
 			};
 
-			mpwm: mpwm@400e8000 {
+			mpwm: pwm@400e8000 {
 				compatible = "nxp,lpc3220-motor-pwm";
 				reg = <0x400e8000 0x78>;
+				#pwm-cells = <3>;
 				status = "disabled";
-				#pwm-cells = <2>;
 			};
 		};
 
@@ -315,7 +316,7 @@
 			/* System Control Block */
 			scb {
 				compatible = "simple-bus";
-				ranges = <0x0 0x040004000 0x00001000>;
+				ranges = <0x0 0x40004000 0x00001000>;
 				#address-cells = <1>;
 				#size-cells = <1>;
 
@@ -481,6 +482,7 @@
 				compatible = "nxp,lpc3220-pwm";
 				reg = <0x4005c000 0x4>;
 				clocks = <&clk LPC32XX_CLK_PWM1>;
+				#pwm-cells = <3>;
 				assigned-clocks = <&clk LPC32XX_CLK_PWM1>;
 				assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>;
 				status = "disabled";
@@ -490,6 +492,7 @@
 				compatible = "nxp,lpc3220-pwm";
 				reg = <0x4005c004 0x4>;
 				clocks = <&clk LPC32XX_CLK_PWM2>;
+				#pwm-cells = <3>;
 				assigned-clocks = <&clk LPC32XX_CLK_PWM2>;
 				assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>;
 				status = "disabled";
diff --git a/arch/arm/boot/dts/lpc4337-ciaa.dts b/arch/arm/boot/dts/nxp/lpc/lpc4337-ciaa.dts
index beddaba85393..5ff43c825944 100644
--- a/arch/arm/boot/dts/lpc4337-ciaa.dts
+++ b/arch/arm/boot/dts/nxp/lpc/lpc4337-ciaa.dts
@@ -108,14 +108,14 @@
 	};
 
 	ssp_pins: ssp-pins {
-		ssp1_cs {
+		ssp1_cs_cfg {
 			pins = "p6_7";
 			function = "gpio";
 			bias-pull-up;
 			bias-disable;
 		};
 
-		ssp1_miso_mosi {
+		ssp1_miso_mosi_cfg {
 			pins = "p1_3", "p1_4";
 			function = "ssp1";
 			slew-rate = <1>;
@@ -124,7 +124,7 @@
 			input-schmitt-disable;
 		};
 
-		ssp1_sck {
+		ssp1_sck_cfg {
 			pins = "pf_4";
 			function = "ssp1";
 			slew-rate = <1>;
diff --git a/arch/arm/boot/dts/lpc4350-hitex-eval.dts b/arch/arm/boot/dts/nxp/lpc/lpc4350-hitex-eval.dts
index 93d0c2e99e7c..18f757c56905 100644
--- a/arch/arm/boot/dts/lpc4350-hitex-eval.dts
+++ b/arch/arm/boot/dts/nxp/lpc/lpc4350-hitex-eval.dts
@@ -43,50 +43,50 @@
 		poll-interval = <100>;
 		autorepeat;
 
-		button0 {
+		button-0 {
 			label = "joy:right";
 			linux,code = <KEY_RIGHT>;
 			gpios = <&pca_gpio 8 GPIO_ACTIVE_LOW>;
 		};
 
-		button1 {
+		button-1 {
 			label = "joy:up";
 			linux,code = <KEY_UP>;
 			gpios = <&pca_gpio 9 GPIO_ACTIVE_LOW>;
 		};
 
 
-		button2 {
+		button-2 {
 			label = "joy:enter";
 			linux,code = <KEY_ENTER>;
 			gpios = <&pca_gpio 10 GPIO_ACTIVE_LOW>;
 		};
 
-		button3 {
+		button-3 {
 			label = "joy:left";
 			linux,code = <KEY_LEFT>;
 			gpios = <&pca_gpio 11 GPIO_ACTIVE_LOW>;
 		};
 
-		button4 {
+		button-4 {
 			label = "joy:down";
 			linux,code = <KEY_DOWN>;
 			gpios = <&pca_gpio 12 GPIO_ACTIVE_LOW>;
 		};
 
-		button5 {
+		button-5 {
 			label = "user:sw3";
 			linux,code = <KEY_F1>;
 			gpios = <&pca_gpio 13 GPIO_ACTIVE_LOW>;
 		};
 
-		button6 {
+		button-6 {
 			label = "user:sw4";
 			linux,code = <KEY_F2>;
 			gpios = <&pca_gpio 14 GPIO_ACTIVE_LOW>;
 		};
 
-		button7 {
+		button-7 {
 			label = "user:sw5";
 			linux,code = <KEY_F3>;
 			gpios = <&pca_gpio 15 GPIO_ACTIVE_LOW>;
@@ -406,6 +406,9 @@
 		ext_sram: sram@2,0 {
 			compatible = "mmio-sram";
 			reg = <2 0 0x80000>; /* 512 KiB SRAM on IS62WV25616 */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 2 0 0x80000>;
 		};
 	};
 };
@@ -451,8 +454,9 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&spifi_pins>;
 
-	flash {
+	flash@0 {
 		compatible = "jedec,spi-nor";
+		reg = <0>;
 		spi-rx-bus-width = <4>;
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/lpc4350.dtsi b/arch/arm/boot/dts/nxp/lpc/lpc4350.dtsi
index c4422f587055..707d22a219d8 100644
--- a/arch/arm/boot/dts/lpc4350.dtsi
+++ b/arch/arm/boot/dts/nxp/lpc/lpc4350.dtsi
@@ -24,16 +24,25 @@
 		sram0: sram@10000000 {
 			compatible = "mmio-sram";
 			reg = <0x10000000 0x20000>; /* 96 + 32 KiB local SRAM */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
 		};
 
 		sram1: sram@10080000 {
 			compatible = "mmio-sram";
 			reg = <0x10080000 0x12000>; /* 64 + 8 KiB local SRAM */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
 		};
 
 		sram2: sram@20000000 {
 			compatible = "mmio-sram";
 			reg = <0x20000000 0x10000>; /* 4 x 16 KiB AHB SRAM */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts b/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dts
index 224f80a4a31d..7ccb4c2ca571 100644
--- a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts
+++ b/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dts
@@ -60,31 +60,31 @@
 		poll-interval = <100>;
 		autorepeat;
 
-		button0 {
+		button-0 {
 			label = "joy_enter";
 			linux,code = <KEY_ENTER>;
 			gpios = <&gpio LPC_GPIO(4,8) GPIO_ACTIVE_LOW>;
 		};
 
-		button1 {
+		button-1 {
 			label = "joy_left";
 			linux,code = <KEY_LEFT>;
 			gpios = <&gpio LPC_GPIO(4,9) GPIO_ACTIVE_LOW>;
 		};
 
-		button2 {
+		button-2 {
 			label = "joy_up";
 			linux,code = <KEY_UP>;
 			gpios = <&gpio LPC_GPIO(4,10) GPIO_ACTIVE_LOW>;
 		};
 
-		button3 {
+		button-3 {
 			label = "joy_right";
 			linux,code = <KEY_RIGHT>;
 			gpios = <&gpio LPC_GPIO(4,12) GPIO_ACTIVE_LOW>;
 		};
 
-		button4 {
+		button-4 {
 			label = "joy_down";
 			linux,code = <KEY_DOWN>;
 			gpios = <&gpio LPC_GPIO(4,13) GPIO_ACTIVE_LOW>;
@@ -403,7 +403,7 @@
 	};
 
 	ssp0_pins: ssp0-pins {
-		ssp0_sck_miso_mosi {
+		ssp0_sck_miso_mosi_cfg {
 			pins = "pf_0", "pf_2", "pf_3";
 			function = "ssp0";
 			slew-rate = <1>;
@@ -412,7 +412,7 @@
 			input-schmitt-disable;
 		};
 
-		ssp0_ssel {
+		ssp0_ssel_cfg {
 			pins = "pf_1";
 			function = "ssp0";
 			bias-pull-up;
@@ -452,12 +452,12 @@
 	};
 
 	usb0_pins: usb0-pins {
-		usb0_pwr_enable {
+		usb0_pwr_enable_cfg {
 			pins = "p2_3";
 			function = "usb0";
 		};
 
-		usb0_pwr_fault {
+		usb0_pwr_fault_cfg {
 			pins = "p8_0";
 			function = "usb0";
 			bias-disable;
@@ -482,8 +482,8 @@
 		reg = <0x1d>;
 	};
 
-	lm75@48 {
-		compatible = "nxp,lm75";
+	temperature-sensor@48 {
+		compatible = "national,lm75b";
 		reg = <0x48>;
 	};
 
@@ -582,8 +582,9 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&spifi_pins>;
 
-	flash {
+	flash@0 {
 		compatible = "jedec,spi-nor";
+		reg = <0>;
 		spi-cpol;
 		spi-cpha;
 		spi-rx-bus-width = <4>;
diff --git a/arch/arm/boot/dts/lpc4357-myd-lpc4357.dts b/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts
index 1f84654df50c..d18f2b2caf68 100644
--- a/arch/arm/boot/dts/lpc4357-myd-lpc4357.dts
+++ b/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts
@@ -63,6 +63,7 @@
 
 	panel: panel {
 		compatible = "innolux,at070tn92";
+		power-supply = <&vcc>;
 
 		port {
 			panel_input: endpoint {
@@ -511,7 +512,7 @@
 	clock-frequency = <400000>;
 
 	sensor@49 {
-		compatible = "lm75";
+		compatible = "national,lm75";
 		reg = <0x49>;
 	};
 
@@ -543,7 +544,7 @@
 	pinctrl-0 = <&enet_rmii_pins>;
 	phy-handle = <&phy1>;
 
-	mdio0 {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
@@ -569,8 +570,9 @@
 	pinctrl-0 = <&spifi_pins>;
 
 	/* Atmel AT25DF321A */
-	flash {
+	flash@0 {
 		compatible = "jedec,spi-nor";
+		reg = <0>;
 		spi-max-frequency = <51000000>;
 		spi-cpol;
 		spi-cpha;
diff --git a/arch/arm/boot/dts/lpc4357.dtsi b/arch/arm/boot/dts/nxp/lpc/lpc4357.dtsi
index 72f12db8d53a..d138ee7869ff 100644
--- a/arch/arm/boot/dts/lpc4357.dtsi
+++ b/arch/arm/boot/dts/nxp/lpc/lpc4357.dtsi
@@ -24,16 +24,25 @@
 		sram0: sram@10000000 {
 			compatible = "mmio-sram";
 			reg = <0x10000000 0x8000>; /* 32 KiB local SRAM */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
 		};
 
 		sram1: sram@10080000 {
 			compatible = "mmio-sram";
 			reg = <0x10080000 0xa000>; /* 32 + 8 KiB local SRAM */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
 		};
 
 		sram2: sram@20000000 {
 			compatible = "mmio-sram";
 			reg = <0x20000000 0x10000>; /* 4 x 16 KiB AHB SRAM */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/nxp/ls/Makefile b/arch/arm/boot/dts/nxp/ls/Makefile
new file mode 100644
index 000000000000..53240b04c968
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/ls/Makefile
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_SOC_LS1021A) += \
+	ls1021a-iot.dtb \
+	ls1021a-moxa-uc-8410a.dtb \
+	ls1021a-qds.dtb \
+	ls1021a-tqmls1021a-mbls1021a.dtb \
+	ls1021a-tsn.dtb \
+	ls1021a-twr.dtb
+
+ls1021a-tqmls1021a-mbls1021a-hdmi-dtbs += ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-hdmi.dtbo
+ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33-dtbs += ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtbo
+ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-dc44-dtbs += ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-dc44.dtbo
+ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-fc21-dtbs += ls1021a-tqmls1021a-mbls1021a.dtb ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-fc21.dtbo
+dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-hdmi.dtb
+dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtb
+dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-dc44.dtb
+dtb-$(CONFIG_SOC_LS1021A) += ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-fc21.dtb
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-iot.dts b/arch/arm/boot/dts/nxp/ls/ls1021a-iot.dts
new file mode 100644
index 000000000000..e13ccae629a7
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-iot.dts
@@ -0,0 +1,227 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2021-2022 NXP
+ *
+ */
+
+/dts-v1/;
+#include "ls1021a.dtsi"
+
+/ {
+	model = "LS1021A-IOT Board";
+	compatible = "fsl,ls1021a-iot", "fsl,ls1021a";
+
+	sys_mclk: clock-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	reg_3p3v: regulator-3V3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_2p5v: regulator-2V5 {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker Ext",
+			"Line", "Line In Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"Microphone Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"Speaker Ext", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+			frame-master;
+			bitclock-master;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+			frame-master;
+			bitclock-master;
+		};
+	};
+};
+
+&can0 {
+	status = "disabled";
+};
+
+&can1 {
+	status = "disabled";
+};
+
+&can2 {
+	status = "disabled";
+};
+
+&can3 {
+	status = "okay";
+};
+
+&dcu {
+	display = <&display>;
+	status = "okay";
+
+	display: display@0 {
+		bits-per-pixel = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+
+			timing0: mode0 {
+				clock-frequency = <25000000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <80>;
+				hfront-porch = <80>;
+				vback-porch = <16>;
+				vfront-porch = <16>;
+				hsync-len = <12>;
+				vsync-len = <2>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+			};
+		};
+	};
+};
+
+&enet0 {
+	tbi-handle = <&tbi1>;
+	phy-handle = <&phy1>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&enet1 {
+	tbi-handle = <&tbi1>;
+	phy-handle = <&phy3>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&enet2 {
+	fixed-link = <0 1 1000 0 0>;
+	phy-connection-type = "rgmii-id";
+	status = "okay";
+};
+
+&esdhc {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	pca9555: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sgtl5000: audio-codec@2a {
+		#sound-dai-cells = <0x0>;
+		compatible = "fsl,sgtl5000";
+		reg = <0x2a>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_2p5v>;
+		clocks = <&sys_mclk>;
+	};
+
+	max1239: adc@35 {
+		compatible = "maxim,max1239";
+		reg = <0x35>;
+		#io-channel-cells = <1>;
+	};
+
+	ina2201: core-monitor@44 {
+		compatible = "ti,ina220";
+		reg = <0x44>;
+		shunt-resistor = <1000>;
+	};
+
+	ina2202: current-monitor@45 {
+		compatible = "ti,ina220";
+		reg = <0x45>;
+		shunt-resistor = <1000>;
+	};
+
+	lm75b: thermal-monitor@48 {
+		compatible = "national,lm75b";
+		reg = <0x48>;
+	};
+};
+
+&lpuart0 {
+	status = "okay";
+};
+
+&mdio0 {
+	phy0: ethernet-phy@0 {
+		reg = <0x0>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <0x1>;
+	};
+
+	phy2: ethernet-phy@2 {
+		reg = <0x2>;
+	};
+
+	phy3: ethernet-phy@3 {
+		reg = <0x3>;
+	};
+
+	tbi1: tbi-phy@1f {
+		reg = <0x1f>;
+		device_type = "tbi-phy";
+	};
+};
+
+&qspi {
+	num-cs = <2>;
+	status = "okay";
+
+	s25fl128s: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&sai2 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts b/arch/arm/boot/dts/nxp/ls/ls1021a-moxa-uc-8410a.dts
index f3ddea934f1b..d2cae8c7d7a6 100644
--- a/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-moxa-uc-8410a.dts
@@ -30,11 +30,11 @@
 	};
 
 	reg_3p3v: regulator-3p3v {
-		  compatible = "regulator-fixed";
-		  regulator-name = "3P3V";
-		  regulator-min-microvolt = <3300000>;
-		  regulator-max-microvolt = <3300000>;
-		  regulator-always-on;
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
 	};
 
 	leds {
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-qds.dts b/arch/arm/boot/dts/nxp/ls/ls1021a-qds.dts
new file mode 100644
index 000000000000..a880875ced83
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-qds.dts
@@ -0,0 +1,326 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ * Copyright 2018 NXP
+ */
+
+/dts-v1/;
+#include "ls1021a.dtsi"
+
+/ {
+	model = "LS1021A QDS Board";
+	compatible = "fsl,ls1021a-qds", "fsl,ls1021a";
+
+	aliases {
+		enet0_rgmii_phy = &rgmii_phy1;
+		enet1_rgmii_phy = &rgmii_phy2;
+		enet2_rgmii_phy = &rgmii_phy3;
+		enet0_sgmii_phy = &sgmii_phy1c;
+		enet1_sgmii_phy = &sgmii_phy1d;
+	};
+
+	sys_mclk: clock-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	reg_3p3v: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker Ext",
+			"Line", "Line In Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"Microphone Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"Speaker Ext", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+			frame-master;
+			bitclock-master;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&codec>;
+			frame-master;
+			bitclock-master;
+		};
+	};
+};
+
+&dspi0 {
+	bus-num = <0>;
+	status = "okay";
+
+	dspiflash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "atmel,at45db021d", "atmel,at45", "atmel,dataflash";
+		spi-max-frequency = <16000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+	};
+};
+
+&enet0 {
+	tbi-handle = <&tbi0>;
+	phy-handle = <&sgmii_phy1c>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&enet1 {
+	tbi-handle = <&tbi0>;
+	phy-handle = <&sgmii_phy1d>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&enet2 {
+	phy-handle = <&rgmii_phy3>;
+	phy-connection-type = "rgmii-id";
+	status = "okay";
+};
+
+&esdhc {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	pca9547: mux@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			ds3232: rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+				interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			ina220@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			ina220@41 {
+				compatible = "ti,ina220";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			eeprom@56 {
+				compatible = "atmel,24c512";
+				reg = <0x56>;
+			};
+
+			eeprom@57 {
+				compatible = "atmel,24c512";
+				reg = <0x57>;
+			};
+
+			adt7461a@4c {
+				compatible = "adi,adt7461a";
+				reg = <0x4c>;
+			};
+		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+
+			codec: sgtl5000@2a {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,sgtl5000";
+				reg = <0x2a>;
+				VDDA-supply = <&reg_3p3v>;
+				VDDIO-supply = <&reg_3p3v>;
+				clocks = <&sys_mclk>;
+			};
+		};
+	};
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NOR, NAND Flashes and FPGA on board */
+	ranges = <0x0 0x0 0x0 0x60000000 0x08000000>,
+		 <0x2 0x0 0x0 0x7e800000 0x00010000>,
+		 <0x3 0x0 0x0 0x7fb00000 0x00000100>;
+	status = "okay";
+
+	flash@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		big-endian;
+		bank-width = <2>;
+		device-width = <1>;
+	};
+
+	nand@2,0 {
+		compatible = "fsl,ifc-nand";
+		reg = <0x2 0x0 0x10000>;
+	};
+
+	fpga: board-control@3,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-mfd";
+		reg = <0x3 0x0 0x0000100>;
+		bank-width = <1>;
+		device-width = <1>;
+		ranges = <0 3 0 0x100>;
+
+		mdio-mux@54 {
+			compatible = "mdio-mux-mmioreg", "mdio-mux";
+			mdio-parent-bus = <&mdio0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x54 1>; /* BRDCFG4 */
+			mux-mask = <0xe0>; /* EMI1[2:0] */
+
+			/* Onboard PHYs */
+			ls1021amdio0: mdio@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				rgmii_phy1: ethernet-phy@1 {
+					reg = <0x1>;
+				};
+			};
+
+			ls1021amdio1: mdio@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				rgmii_phy2: ethernet-phy@2 {
+					reg = <0x2>;
+				};
+			};
+
+			ls1021amdio2: mdio@40 {
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				rgmii_phy3: ethernet-phy@3 {
+					reg = <0x3>;
+				};
+			};
+
+			ls1021amdio3: mdio@60 {
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				sgmii_phy1c: ethernet-phy@1c {
+					reg = <0x1c>;
+				};
+			};
+
+			ls1021amdio4: mdio@80 {
+				reg = <0x80>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				sgmii_phy1d: ethernet-phy@1d {
+					reg = <0x1d>;
+				};
+			};
+		};
+	};
+};
+
+&lpuart0 {
+	status = "okay";
+};
+
+&mdio0 {
+	tbi0: tbi-phy@8 {
+		reg = <0x8>;
+		device_type = "tbi-phy";
+	};
+};
+
+&qspi {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+	};
+};
+
+&sai2 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&can0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "disabled";
+};
+
+&can3 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-hdmi.dtso b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-hdmi.dtso
new file mode 100644
index 000000000000..e713a2ecbfc2
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-hdmi.dtso
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ * Copyright 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+/plugin/;
+
+&dcu {
+	status = "okay";
+
+	port {
+		dcu_out: endpoint {
+			remote-endpoint = <&sii9022a_in>;
+		};
+	};
+};
+
+&hdmi_out {
+	status = "okay";
+};
+
+&sii9022a {
+	status = "okay";
+};
+
+&sii9022a_in {
+	remote-endpoint = <&dcu_out>;
+};
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtso b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtso
new file mode 100644
index 000000000000..e9708f3c6740
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-lvds-tm070jvhg33.dtso
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ * Copyright 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/dts-v1/;
+/plugin/;
+
+&backlight_dcu {
+	status = "okay";
+};
+
+&dcu {
+	status = "okay";
+
+	port {
+		dcu_out: endpoint {
+			remote-endpoint = <&lvds_encoder_in>;
+		};
+	};
+};
+
+&display {
+	compatible = "tianma,tm070jvhg33";
+	status = "okay";
+};
+
+&lvds_encoder {
+	status = "okay";
+};
+
+&lvds_encoder_in {
+	remote-endpoint = <&dcu_out>;
+};
+
+&lvds_encoder_out {
+	remote-endpoint = <&panel_in>;
+};
+
+&panel_in {
+	remote-endpoint = <&lvds_encoder_out>;
+};
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-dc44.dtso b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-dc44.dtso
new file mode 100644
index 000000000000..66cedc2dcd96
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-dc44.dtso
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ * Copyright 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/dts-v1/;
+/plugin/;
+
+&backlight_dcu {
+	status = "okay";
+};
+
+&dcu {
+	status = "okay";
+
+	port {
+		dcu_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&display {
+	compatible = "cdtech,s070swv29hg-dc44";
+	status = "okay";
+};
+
+&i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	polytouch: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pca9554_0>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+		/* LCD_PWR_EN -> TSC_WAKE */
+		wake-gpios = <&pca9554_1 4 GPIO_ACTIVE_HIGH>;
+		iovcc-supply = <&reg_3p3v>;
+		vcc-supply = <&reg_3p3v>;
+		gain = <20>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+	};
+};
+
+&panel_in {
+	remote-endpoint = <&dcu_out>;
+};
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-fc21.dtso b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-fc21.dtso
new file mode 100644
index 000000000000..8b9455bffbd2
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-fc21.dtso
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ * Copyright 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/dts-v1/;
+/plugin/;
+
+&backlight_dcu {
+	status = "okay";
+};
+
+&dcu {
+	status = "okay";
+
+	port {
+		dcu_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&display {
+	compatible = "cdtech,s070pws19hp-fc21";
+	status = "okay";
+};
+
+&i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	polytouch: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pca9554_0>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+		/* LCD_PWR_EN -> TSC_WAKE */
+		wake-gpios = <&pca9554_1 4 GPIO_ACTIVE_HIGH>;
+		iovcc-supply = <&reg_3p3v>;
+		vcc-supply = <&reg_3p3v>;
+		gain = <20>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+	};
+};
+
+&panel_in {
+	remote-endpoint = <&dcu_out>;
+};
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a.dts b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a.dts
new file mode 100644
index 000000000000..5606585dd560
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a.dts
@@ -0,0 +1,406 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/leds/leds-pca9532.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+#include "ls1021a-tqmls1021a.dtsi"
+
+/ {
+	model = "TQMLS102xA SOM on MBLS102xA";
+	compatible = "tq,ls1021a-tqmls1021a-mbls102xa", "tq,ls1021a-tqmls1021a", "fsl,ls1021a";
+
+	audio_mclk: audio-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	backlight_dcu: backlight {
+		compatible = "gpio-backlight";
+		gpios = <&pca9530 0 GPIO_ACTIVE_LOW>;
+		status = "disabled";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		switch-1 {
+			label = "S6";
+			linux,code = <BTN_0>;
+			gpios = <&pca9554_0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		btn2: switch-2 {
+			label = "S7";
+			linux,code = <BTN_1>;
+			gpios = <&pca9554_0 1 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-3 {
+			label = "S8";
+			linux,code = <BTN_2>;
+			gpios = <&pca9554_0 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_leds: gpio-leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <0>;
+			gpios = <&pca9554_2 4 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <1>;
+			gpios = <&pca9554_2 5 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <2>;
+			gpios = <&pca9554_2 6 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-3 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_HEARTBEAT;
+			function-enumerator = <0>;
+			gpios = <&pca9554_2 7 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	lvds_encoder: lvds-encoder {
+		compatible = "ti,sn75lvds83", "lvds-encoder";
+		power-supply = <&reg_3p3v>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_encoder_in: endpoint {};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_encoder_out: endpoint {};
+			};
+		};
+	};
+
+	reg_1p2v: regulator-1p2v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P2V";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		vin-supply = <&reg_3p3v>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	hdmi_out: hdmi {
+		compatible = "hdmi-connector";
+		type = "a";
+		ddc-i2c-bus = <&i2c0>;
+		status = "disabled";
+
+		port {
+			hdmi_in: endpoint {
+				remote-endpoint = <&sii9022a_out>;
+			};
+		};
+	};
+
+	display: panel {
+		backlight = <&backlight_dcu>;
+		enable-gpios = <&pca9554_1 3 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_3p3v>;
+		status = "disabled";
+
+		port {
+			panel_in: endpoint {};
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-tlv320aic32x4";
+		model = "tqm-tlv320aic32";
+		ssi-controller = <&sai1>;
+		audio-codec = <&tlv320aic32x4>;
+	};
+
+};
+
+&can0 {
+	xceiver-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&can1 {
+	xceiver-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&dspi0 {
+	status = "okay";
+};
+
+&enet0 {
+	phy-handle = <&rgmii_phy0c>;
+	phy-mode = "rgmii-id";
+	mac-address = [ 00 00 00 00 00 00 ];
+	status = "okay";
+};
+
+&enet1 {
+	tbi-handle = <&tbi1>;
+	phy-handle = <&sgmii_phy03>;
+	phy-mode = "sgmii";
+	mac-address = [ 00 00 00 00 00 00 ];
+	status = "okay";
+};
+
+&enet2 {
+	phy-handle = <&rgmii_phy04>;
+	phy-mode = "rgmii-id";
+	mac-address = [ 00 00 00 00 00 00 ];
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	tlv320aic32x4: audio-codec@18 {
+		compatible = "ti,tlv320aic32x4";
+		reg = <0x18>;
+		clocks = <&audio_mclk>;
+		clock-names = "mclk";
+		ldoin-supply = <&reg_3p3v>;
+		iov-supply = <&reg_3p3v>;
+	};
+
+	pca9554_0: gpio-expander@20 {
+		compatible = "nxp,pca9554";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		vcc-supply = <&reg_3p3v>;
+		gpio-line-names = "BUTTON0", "BUTTON1",
+				  "BUTTON2", "EMMC_SEL",
+				  "DIP2", "DIP3",
+				  "EXT_TOUCH_INT", "GPIO_1";
+	};
+
+	pca9554_1: gpio-expander@21 {
+		compatible = "nxp,pca9554";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		vcc-supply = <&reg_3p3v>;
+		gpio-line-names = "PCIE_PWR_EN", "MPCIE_DISABLE#",
+				  "MPCIE_WAKE#", "LCD_BLT_EN",
+				  "LCD_PWR_EN", "EC1_PHY_PWDN",
+				  "EC3_PHY_PWDN", "SGMII_PHY_PWDN";
+	};
+
+	pca9554_2: gpio-expander@22 {
+		compatible = "nxp,pca9554";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&extirq>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		vcc-supply = <&reg_3p3v>;
+		gpio-line-names = "MUX_SEL0", "MUX_SEL1",
+				  "MUX_SEL2", "MUX_SEL3",
+				  "V95", "V96", "V97", "V98";
+	};
+
+	sii9022a: hdmi-transmitter@3b {
+		compatible = "sil,sii9022";
+		reg = <0x3b>;
+		iovcc-supply = <&reg_3p3v>;
+		cvcc12-supply = <&reg_1p2v>;
+		interrupts = <GIC_SPI 167 IRQ_TYPE_EDGE_RISING>;
+		#sound-dai-cells = <0>;
+		sil,i2s-data-lanes = <0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				sii9022a_in: endpoint {};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				sii9022a_out: endpoint {
+					remote-endpoint = <&hdmi_in>;
+				};
+			};
+		};
+	};
+
+	stmpe811: port-expander@41 {
+		compatible = "st,stmpe811";
+		reg = <0x41>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+		vcc-supply = <&reg_3p3v>;
+		vio-supply = <&reg_3p3v>;
+
+		gpio {
+			compatible = "st,stmpe-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			/* GPIO 5-7 used for touch */
+			st,norequest-mask = <0xf0>;
+			gpio-line-names = "GPIO_ADC_I2C1_1",
+					  "GPIO_ADC_I2C1_2",
+					  "GPIO_ADC_I2C1_3",
+					  "GPIO_ADC_I2C1_4";
+		};
+
+		touchscreen {
+			compatible = "st,stmpe-ts";
+			status = "disabled";
+		};
+	};
+
+	pca9530: leds@60 {
+		compatible = "nxp,pca9530";
+		reg = <0x60>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "PWM_0", "PWM_1";
+
+		led-0 {
+			type = <PCA9532_TYPE_GPIO>;
+		};
+
+		led-1 {
+			type = <PCA9532_TYPE_GPIO>;
+		};
+	};
+
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&lpuart0 {
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+&mdio0 {
+	sgmii_phy03: ethernet-phy@3 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x03>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		ti,dp83867-rxctrl-strap-quirk;
+	};
+
+	rgmii_phy04: ethernet-phy@4 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x04>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	rgmii_phy0c: ethernet-phy@c {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0c>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+};
+
+&pwm6 {
+	status = "okay";
+};
+
+&pwm7 {
+	status = "okay";
+};
+
+&sai1 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb3 {
+	/*
+	 * Although DR connector, VBUS is always driven, so
+	 * restrict to host mode.
+	 */
+	dr_mode = "host";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a.dtsi b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a.dtsi
new file mode 100644
index 000000000000..167559521ae1
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a.dtsi
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+#include "ls1021a.dtsi"
+
+/ {
+	model = "TQMLS102xA SOM";
+	compatible = "tq,ls1021a-tqmls1021a", "fsl,ls1021a";
+
+	reg_3p3v_som: regulator-3p3v-som {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V_SOM";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&esdhc {
+	/* e-MMC over 8 data lines */
+	bus-width = <8>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	/* MC34VR500 DC/DC regulator at 0x8, managed by PMIC */
+	/* On-board PMC at 0x11 */
+
+	sa56004: temperature-sensor@4c {
+		compatible = "nxp,sa56004";
+		reg = <0x4c>;
+		vcc-supply = <&reg_3p3v_som>;
+	};
+
+	rtc0: rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		quartz-load-femtofarads = <12500>;
+	};
+
+	m24c64_54: eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+		pagesize = <32>;
+		read-only;
+		vcc-supply = <&reg_3p3v_som>;
+	};
+};
+
+&mdio0 {
+	tbi1: tbi-phy@8 {
+		reg = <0x8>;
+		device_type = "tbi-phy";
+	};
+};
+
+&qspi {
+	status = "okay";
+
+	qflash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		reg = <0>;
+		vcc-supply = <&reg_3p3v_som>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			uboot@0 {
+				label = "U-Boot-PBL";
+				reg = <0x0 0xe0000>;
+			};
+
+			env@e0000 {
+				label = "U-Boot Environment";
+				reg = <0xe0000 0x10000>;
+			};
+
+			dtb@f0000 {
+				label = "DTB";
+				reg = <0xf0000 0x10000>;
+			};
+
+			linux@100000 {
+				label = "Linux";
+				reg = <0x100000 0x700000>;
+			};
+
+			rootfs@800000 {
+				label = "RootFS";
+				reg = <0x800000 0x3800000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ls1021a-tsn.dts b/arch/arm/boot/dts/nxp/ls/ls1021a-tsn.dts
index 9d8f0c2a8aba..da76566f3510 100644
--- a/arch/arm/boot/dts/ls1021a-tsn.dts
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-tsn.dts
@@ -8,6 +8,7 @@
 
 / {
 	model = "NXP LS1021A-TSN Board";
+	compatible = "fsl,ls1021a-tsn", "fsl,ls1021a";
 
 	sys_mclk: clock-mclk {
 		compatible = "fixed-clock";
@@ -39,8 +40,6 @@
 	/* ADG704BRMZ 1:4 SPI mux/demux */
 	sja1105: ethernet-switch@1 {
 		reg = <0x1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 		compatible = "nxp,sja1105t";
 		/* 12 MHz */
 		spi-max-frequency = <12000000>;
@@ -90,6 +89,8 @@
 				/* Internal port connected to eth2 */
 				ethernet = <&enet2>;
 				phy-mode = "rgmii";
+				rx-internal-delay-ps = <0>;
+				tx-internal-delay-ps = <0>;
 				reg = <4>;
 
 				fixed-link {
@@ -136,7 +137,6 @@
 	/* 3 axis accelerometer */
 	accelerometer@1e {
 		compatible = "fsl,fxls8471";
-		position = <0>;
 		reg = <0x1e>;
 	};
 
@@ -251,7 +251,7 @@
 
 	flash@0 {
 		/* Rev. A uses 64MB flash, Rev. B & C use 32MB flash */
-		compatible = "jedec,spi-nor", "s25fl256s1", "s25fl512s";
+		compatible = "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-twr.dts b/arch/arm/boot/dts/nxp/ls/ls1021a-twr.dts
new file mode 100644
index 000000000000..38281b904301
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-twr.dts
@@ -0,0 +1,240 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ * Copyright 2018 NXP
+ */
+
+/dts-v1/;
+#include "ls1021a.dtsi"
+
+/ {
+	model = "LS1021A TWR Board";
+	compatible = "fsl,ls1021a-twr", "fsl,ls1021a";
+
+	aliases {
+		enet2_rgmii_phy = &rgmii_phy1;
+		enet0_sgmii_phy = &sgmii_phy2;
+		enet1_sgmii_phy = &sgmii_phy0;
+	};
+
+	sys_mclk: clock-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	reg_3p3v: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker Ext",
+			"Line", "Line In Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"Microphone Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"Speaker Ext", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+			frame-master;
+			bitclock-master;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&codec>;
+			frame-master;
+			bitclock-master;
+		};
+	};
+
+	panel: panel {
+		compatible = "nec,nl4827hc19-05b";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dcu_out>;
+			};
+		};
+	};
+};
+
+&dcu {
+	status = "okay";
+
+	port {
+		dcu_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&dspi1 {
+	bus-num = <0>;
+	status = "okay";
+
+	dspiflash: s25fl064k@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spansion,s25fl064k";
+		spi-max-frequency = <16000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+	};
+};
+
+&enet0 {
+	tbi-handle = <&tbi0>;
+	phy-handle = <&sgmii_phy2>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&enet1 {
+	tbi-handle = <&tbi1>;
+	phy-handle = <&sgmii_phy0>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&enet2 {
+	phy-handle = <&rgmii_phy1>;
+	phy-connection-type = "rgmii-id";
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	ina220@40 {
+		compatible = "ti,ina220";
+		reg = <0x40>;
+		shunt-resistor = <1000>;
+	};
+
+	ina220@41 {
+		compatible = "ti,ina220";
+		reg = <0x41>;
+		shunt-resistor = <1000>;
+	};
+
+};
+
+&i2c1 {
+	status = "okay";
+	codec: sgtl5000@a {
+		#sound-dai-cells = <0>;
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+		clocks = <&sys_mclk>;
+	};
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NOR Flash on board */
+	ranges = <0x0 0x0 0x0 0x60000000 0x08000000>;
+	status = "okay";
+
+	flash@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		big-endian;
+		bank-width = <2>;
+		device-width = <1>;
+	};
+};
+
+&lpuart0 {
+	status = "okay";
+};
+
+&mdio0 {
+	sgmii_phy0: ethernet-phy@0 {
+		reg = <0x0>;
+	};
+	rgmii_phy1: ethernet-phy@1 {
+		reg = <0x1>;
+	};
+	sgmii_phy2: ethernet-phy@2 {
+		reg = <0x2>;
+	};
+	tbi0: tbi-phy@1f {
+		reg = <0x1f>;
+		device_type = "tbi-phy";
+	};
+};
+
+&mdio1 {
+	tbi1: tbi-phy@1f {
+		reg = <0x1f>;
+		device_type = "tbi-phy";
+	};
+};
+
+&esdhc {
+        status = "okay";
+};
+
+&qspi {
+	status = "okay";
+
+	n25q128a130: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+	};
+};
+
+&sai1 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&can0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "disabled";
+};
+
+&can3 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi
index 4fce81422943..e0b9ea6dd510 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi
@@ -1,48 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright 2013-2014 Freescale Semiconductor, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -51,7 +9,6 @@
 / {
 	#address-cells = <2>;
 	#size-cells = <2>;
-	compatible = "fsl,ls1021a";
 	interrupt-parent = <&gic>;
 
 	aliases {
@@ -90,7 +47,7 @@
 		};
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x0>;
 	};
@@ -136,10 +93,9 @@
 			compatible = "fsl,qoriq-memory-controller";
 			reg = <0x0 0x1080000 0x0 0x1000>;
 			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
-			big-endian;
 		};
 
-		gic: interrupt-controller@1400000 {
+		gic: interrupt-controller@1401000 {
 			compatible = "arm,gic-400", "arm,cortex-a7-gic";
 			#interrupt-cells = <3>;
 			interrupt-controller;
@@ -155,7 +111,7 @@
 			compatible = "fsl,ls1021a-msi";
 			reg = <0x0 0x1570e00 0x0 0x8>;
 			msi-controller;
-			interrupts =  <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		msi2: msi-controller@1570e08 {
@@ -165,10 +121,18 @@
 			interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		ifc: ifc@1530000 {
-			compatible = "fsl,ifc", "simple-bus";
+		ifc: memory-controller@1530000 {
+			compatible = "fsl,ifc";
 			reg = <0x0 0x1530000 0x0 0x10000>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		sfp: efuse@1e80000 {
+			compatible = "fsl,ls1021a-sfp";
+			reg = <0x0 0x1e80000 0x0 0x10000>;
+			clocks = <&clockgen 4 3>;
+			clock-names = "sfp";
 		};
 
 		dcfg: dcfg@1ee0000 {
@@ -190,14 +154,13 @@
 			status = "disabled";
 		};
 
-		esdhc: esdhc@1560000 {
+		esdhc: mmc@1560000 {
 			compatible = "fsl,ls1021a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x1560000 0x0 0x10000>;
 			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 			clock-frequency = <0>;
 			voltage-ranges = <1800 1800 3300 3300>;
 			sdhci,auto-cmd12;
-			big-endian;
 			bus-width = <4>;
 			status = "disabled";
 		};
@@ -234,7 +197,7 @@
 					<3 0 &gic GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
 					<4 0 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
 					<5 0 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-map-mask = <0xffffffff 0x0>;
+				interrupt-map-mask = <0x7 0x0>;
 			};
 		};
 
@@ -290,78 +253,45 @@
 			reg = <0x0 0x1f00000 0x0 0x10000>;
 			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 			fsl,tmu-range = <0xb0000 0x9002c 0x6004e 0x30066>;
-			fsl,tmu-calibration = <0x00000000 0x00000020
-					       0x00000001 0x00000024
-					       0x00000002 0x0000002a
-					       0x00000003 0x00000032
-					       0x00000004 0x00000038
-					       0x00000005 0x0000003e
-					       0x00000006 0x00000043
-					       0x00000007 0x0000004a
-					       0x00000008 0x00000050
-					       0x00000009 0x00000059
-					       0x0000000a 0x0000005f
-					       0x0000000b 0x00000066
-
-					       0x00010000 0x00000023
-					       0x00010001 0x0000002b
-					       0x00010002 0x00000033
-					       0x00010003 0x0000003a
-					       0x00010004 0x00000042
-					       0x00010005 0x0000004a
-					       0x00010006 0x00000054
-					       0x00010007 0x0000005c
-					       0x00010008 0x00000065
-					       0x00010009 0x0000006f
-
-					       0x00020000 0x00000029
-					       0x00020001 0x00000033
-					       0x00020002 0x0000003d
-					       0x00020003 0x00000048
-					       0x00020004 0x00000054
-					       0x00020005 0x00000060
-					       0x00020006 0x0000006c
-
-					       0x00030000 0x00000025
-					       0x00030001 0x00000033
-					       0x00030002 0x00000043
-					       0x00030003 0x00000055>;
+			fsl,tmu-calibration = <0x00000000 0x00000020>,
+					      <0x00000001 0x00000024>,
+					      <0x00000002 0x0000002a>,
+					      <0x00000003 0x00000032>,
+					      <0x00000004 0x00000038>,
+					      <0x00000005 0x0000003e>,
+					      <0x00000006 0x00000043>,
+					      <0x00000007 0x0000004a>,
+					      <0x00000008 0x00000050>,
+					      <0x00000009 0x00000059>,
+					      <0x0000000a 0x0000005f>,
+					      <0x0000000b 0x00000066>,
+
+					      <0x00010000 0x00000023>,
+					      <0x00010001 0x0000002b>,
+					      <0x00010002 0x00000033>,
+					      <0x00010003 0x0000003a>,
+					      <0x00010004 0x00000042>,
+					      <0x00010005 0x0000004a>,
+					      <0x00010006 0x00000054>,
+					      <0x00010007 0x0000005c>,
+					      <0x00010008 0x00000065>,
+					      <0x00010009 0x0000006f>,
+
+					      <0x00020000 0x00000029>,
+					      <0x00020001 0x00000033>,
+					      <0x00020002 0x0000003d>,
+					      <0x00020003 0x00000048>,
+					      <0x00020004 0x00000054>,
+					      <0x00020005 0x00000060>,
+					      <0x00020006 0x0000006c>,
+
+					      <0x00030000 0x00000025>,
+					      <0x00030001 0x00000033>,
+					      <0x00030002 0x00000043>,
+					      <0x00030003 0x00000055>;
 			#thermal-sensor-cells = <1>;
 		};
 
-		thermal-zones {
-			cpu_thermal: cpu-thermal {
-				polling-delay-passive = <1000>;
-				polling-delay = <5000>;
-
-				thermal-sensors = <&tmu 0>;
-
-				trips {
-					cpu_alert: cpu-alert {
-						temperature = <85000>;
-						hysteresis = <2000>;
-						type = "passive";
-					};
-					cpu_crit: cpu-crit {
-						temperature = <95000>;
-						hysteresis = <2000>;
-						type = "critical";
-					};
-				};
-
-				cooling-maps {
-					map0 {
-						trip = <&cpu_alert>;
-						cooling-device =
-							<&cpu0 THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>,
-							<&cpu1 THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>;
-					};
-				};
-			};
-		};
-
 		dspi0: spi@2100000 {
 			compatible = "fsl,ls1021a-v1.0-dspi";
 			#address-cells = <1>;
@@ -394,10 +324,9 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2180000 0x0 0x10000>;
 			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
 			clocks = <&clockgen 4 1>;
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 39>, <&edma0 1 38>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 38>, <&edma0 1 39>;
 			status = "disabled";
 		};
 
@@ -407,10 +336,9 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2190000 0x0 0x10000>;
 			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
 			clocks = <&clockgen 4 1>;
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 37>, <&edma0 1 36>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 36>, <&edma0 1 37>;
 			status = "disabled";
 		};
 
@@ -420,10 +348,9 @@
 			#size-cells = <0>;
 			reg = <0x0 0x21a0000 0x0 0x10000>;
 			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
 			clocks = <&clockgen 4 1>;
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 35>, <&edma0 1 34>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 34>, <&edma0 1 35>;
 			status = "disabled";
 		};
 
@@ -682,11 +609,10 @@
 		};
 
 		wdog0: watchdog@2ad0000 {
-			compatible = "fsl,imx21-wdt";
+			compatible = "fsl,ls1021a-wdt", "fsl,imx21-wdt";
 			reg = <0x0 0x2ad0000 0x0 0x10000>;
 			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen 4 1>;
-			clock-names = "wdog-en";
 			big-endian;
 		};
 
@@ -698,9 +624,9 @@
 			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
 				 <&clockgen 4 1>, <&clockgen 4 1>;
 			clock-names = "bus", "mclk1", "mclk2", "mclk3";
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 47>,
-			       <&edma0 1 46>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 46>,
+			       <&edma0 1 47>;
 			status = "disabled";
 		};
 
@@ -712,13 +638,13 @@
 			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
 				 <&clockgen 4 1>, <&clockgen 4 1>;
 			clock-names = "bus", "mclk1", "mclk2", "mclk3";
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 45>,
-			       <&edma0 1 44>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 44>,
+			       <&edma0 1 45>;
 			status = "disabled";
 		};
 
-		edma0: edma@2c00000 {
+		edma0: dma-controller@2c00000 {
 			#dma-cells = <2>;
 			compatible = "fsl,vf610-edma";
 			reg = <0x0 0x2c00000 0x0 0x10000>,
@@ -778,6 +704,7 @@
 
 		enet0: ethernet@2d10000 {
 			compatible = "fsl,etsec2";
+			reg = <0x0 0x2d10000 0x0 0x5000>;
 			device_type = "network";
 			#address-cells = <2>;
 			#size-cells = <2>;
@@ -788,8 +715,6 @@
 			dma-coherent;
 
 			queue-group@2d10000 {
-				#address-cells = <2>;
-				#size-cells = <2>;
 				reg = <0x0 0x2d10000 0x0 0x1000>;
 				interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
@@ -797,8 +722,6 @@
 			};
 
 			queue-group@2d14000  {
-				#address-cells = <2>;
-				#size-cells = <2>;
 				reg = <0x0 0x2d14000 0x0 0x1000>;
 				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
@@ -808,6 +731,7 @@
 
 		enet1: ethernet@2d50000 {
 			compatible = "fsl,etsec2";
+			reg = <0x0 0x2d50000 0x0 0x5000>;
 			device_type = "network";
 			#address-cells = <2>;
 			#size-cells = <2>;
@@ -817,8 +741,6 @@
 			dma-coherent;
 
 			queue-group@2d50000  {
-				#address-cells = <2>;
-				#size-cells = <2>;
 				reg = <0x0 0x2d50000 0x0 0x1000>;
 				interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
@@ -826,8 +748,6 @@
 			};
 
 			queue-group@2d54000  {
-				#address-cells = <2>;
-				#size-cells = <2>;
 				reg = <0x0 0x2d54000 0x0 0x1000>;
 				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
@@ -837,6 +757,7 @@
 
 		enet2: ethernet@2d90000 {
 			compatible = "fsl,etsec2";
+			reg = <0x0 0x2d90000 0x0 0x5000>;
 			device_type = "network";
 			#address-cells = <2>;
 			#size-cells = <2>;
@@ -846,8 +767,6 @@
 			dma-coherent;
 
 			queue-group@2d90000  {
-				#address-cells = <2>;
-				#size-cells = <2>;
 				reg = <0x0 0x2d90000 0x0 0x1000>;
 				interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
@@ -855,8 +774,6 @@
 			};
 
 			queue-group@2d94000  {
-				#address-cells = <2>;
-				#size-cells = <2>;
 				reg = <0x0 0x2d94000 0x0 0x1000>;
 				interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
@@ -879,13 +796,14 @@
 			dr_mode = "host";
 			snps,quirk-frame-length-adjustment = <0x20>;
 			snps,dis_rxdet_inp3_quirk;
+			usb3-lpm-capable;
 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
 		};
 
 		pcie@3400000 {
 			compatible = "fsl,ls1021a-pcie";
-			reg = <0x00 0x03400000 0x0 0x00010000   /* controller registers */
-			       0x40 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg = <0x00 0x03400000 0x0 0x00010000>, /* controller registers */
+			      <0x40 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
 			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
 			fsl,pcie-scfg = <&scfg 0>;
@@ -894,8 +812,8 @@
 			device_type = "pci";
 			num-viewport = <6>;
 			bus-range = <0x0 0xff>;
-			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
-				  0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000>, /* downstream I/O */
+				 <0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 			msi-parent = <&msi1>, <&msi2>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
@@ -908,8 +826,8 @@
 
 		pcie@3500000 {
 			compatible = "fsl,ls1021a-pcie";
-			reg = <0x00 0x03500000 0x0 0x00010000   /* controller registers */
-			       0x48 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg = <0x00 0x03500000 0x0 0x00010000>, /* controller registers */
+			      <0x48 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
 			interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
 			fsl,pcie-scfg = <&scfg 1>;
@@ -918,8 +836,8 @@
 			device_type = "pci";
 			num-viewport = <6>;
 			bus-range = <0x0 0xff>;
-			ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000   /* downstream I/O */
-				  0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000>, /* downstream I/O */
+				 <0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 			msi-parent = <&msi1>, <&msi2>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
@@ -937,6 +855,7 @@
 			clocks = <&clockgen 4 1>, <&clockgen 4 1>;
 			clock-names = "ipg", "per";
 			big-endian;
+			status = "disabled";
 		};
 
 		can1: can@2a80000 {
@@ -946,6 +865,7 @@
 			clocks = <&clockgen 4 1>, <&clockgen 4 1>;
 			clock-names = "ipg", "per";
 			big-endian;
+			status = "disabled";
 		};
 
 		can2: can@2a90000 {
@@ -955,6 +875,7 @@
 			clocks = <&clockgen 4 1>, <&clockgen 4 1>;
 			clock-names = "ipg", "per";
 			big-endian;
+			status = "disabled";
 		};
 
 		can3: can@2aa0000 {
@@ -964,6 +885,7 @@
 			clocks = <&clockgen 4 1>, <&clockgen 4 1>;
 			clock-names = "ipg", "per";
 			big-endian;
+			status = "disabled";
 		};
 
 		ocram1: sram@10000000 {
@@ -982,7 +904,7 @@
 			ranges = <0x0 0x0 0x10010000 0x10000>;
 		};
 
-		qdma: dma-controller@8390000 {
+		qdma: dma-controller@8388000 {
 			compatible = "fsl,ls1021a-qdma";
 			reg = <0x0 0x8388000 0x0 0x1000>, /* Controller regs */
 			      <0x0 0x8389000 0x0 0x1000>, /* Status regs */
@@ -992,6 +914,7 @@
 				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "qdma-error",
 				"qdma-queue0", "qdma-queue1";
+			#dma-cells = <2>;
 			dma-channels = <8>;
 			block-number = <1>;
 			block-offset = <0x1000>;
@@ -1001,19 +924,51 @@
 			big-endian;
 		};
 
-		rcpm: power-controller@1ee2140 {
+		rcpm: wakeup-controller@1ee2140 {
 			compatible = "fsl,ls1021a-rcpm", "fsl,qoriq-rcpm-2.1+";
 			reg = <0x0 0x1ee2140 0x0 0x8>;
 			#fsl,rcpm-wakeup-cells = <2>;
 		};
 
-		ftm_alarm0: timer0@29d0000 {
+		ftm_alarm0: rtc@29d0000 {
 			compatible = "fsl,ls1021a-ftm-alarm";
 			reg = <0x0 0x29d0000 0x0 0x10000>;
-			reg-names = "ftm";
 			fsl,rcpm-wakeup = <&rcpm 0x0 0x20000000>;
 			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
 			big-endian;
 		};
 	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+
+			thermal-sensors = <&tmu 0>;
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit: cpu-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+						<&cpu1 THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/nxp/mxs/Makefile b/arch/arm/boot/dts/nxp/mxs/Makefile
new file mode 100644
index 000000000000..d72ba702b6fa
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/Makefile
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_MXS) += \
+	imx23-evk.dtb \
+	imx23-olinuxino.dtb \
+	imx23-sansa.dtb \
+	imx23-stmp378x_devb.dtb \
+	imx23-xfi3.dtb \
+	imx28-amarula-rmm.dtb \
+	imx28-apf28.dtb \
+	imx28-apf28dev.dtb \
+	imx28-apx4devkit.dtb \
+	imx28-btt3-0.dtb \
+	imx28-btt3-1.dtb \
+	imx28-btt3-2.dtb \
+	imx28-cfa10036.dtb \
+	imx28-cfa10037.dtb \
+	imx28-cfa10049.dtb \
+	imx28-cfa10055.dtb \
+	imx28-cfa10056.dtb \
+	imx28-cfa10057.dtb \
+	imx28-cfa10058.dtb \
+	imx28-duckbill-2-485.dtb \
+	imx28-duckbill-2.dtb \
+	imx28-duckbill-2-enocean.dtb \
+	imx28-duckbill-2-spi.dtb \
+	imx28-duckbill.dtb \
+	imx28-eukrea-mbmx283lc.dtb \
+	imx28-eukrea-mbmx287lc.dtb \
+	imx28-evk.dtb \
+	imx28-m28cu3.dtb \
+	imx28-m28evk.dtb \
+	imx28-sps1.dtb \
+	imx28-ts4600.dtb \
+	imx28-tx28.dtb \
+	imx28-xea.dtb
diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/nxp/mxs/imx23-evk.dts
index 8cbaf1c81174..33b36af1656f 100644
--- a/arch/arm/boot/dts/imx23-evk.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx23-evk.dts
@@ -52,7 +52,7 @@
 	};
 
 	apb@80000000 {
-		apbh@80000000 {
+		apbh-bus@80000000 {
 			nand-controller@8000c000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&gpmi_pins_a &gpmi_pins_fixup>;
@@ -79,7 +79,6 @@
 						MX23_PAD_LCD_RESET__GPIO_1_18
 						MX23_PAD_PWM3__GPIO_1_29
 						MX23_PAD_PWM4__GPIO_1_30
-						MX23_PAD_SSP1_DETECT__SSP1_DETECT
 					>;
 					fsl,drive-strength = <MXS_DRIVE_4mA>;
 					fsl,voltage = <MXS_VOLTAGE_HIGH>;
@@ -100,7 +99,7 @@
 			};
 		};
 
-		apbx@80040000 {
+		apbx-bus@80040000 {
 			lradc@80050000 {
 				status = "okay";
 				fsl,lradc-touchscreen-wires = <4>;
@@ -138,7 +137,7 @@
 
 	backlight_display: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm 2 5000000>;
+		pwms = <&pwm 2 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 	};
diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/nxp/mxs/imx23-olinuxino.dts
index 0729e72f2283..e372e9327a47 100644
--- a/arch/arm/boot/dts/imx23-olinuxino.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx23-olinuxino.dts
@@ -19,7 +19,7 @@
 	};
 
 	apb@80000000 {
-		apbh@80000000 {
+		apbh-bus@80000000 {
 			ssp0: spi@80010000 {
 				compatible = "fsl,imx23-mmc";
 				pinctrl-names = "default";
@@ -64,7 +64,7 @@
 			};
 		};
 
-		apbx@80040000 {
+		apbx-bus@80040000 {
 			lradc@80050000 {
 				status = "okay";
 			};
@@ -101,21 +101,14 @@
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb0_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb0_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			startup-delay-us = <300>; /* LAN9215 requires a POR of 200us minimum */
-			gpio = <&gpio0 17 0>;
-		};
+	reg_usb0_vbus: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb0_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		startup-delay-us = <300>; /* LAN9215 requires a POR of 200us minimum */
+		gpio = <&gpio0 17 0>;
 	};
 
 	leds {
diff --git a/arch/arm/boot/dts/imx23-pinfunc.h b/arch/arm/boot/dts/nxp/mxs/imx23-pinfunc.h
index 5c0f32ca3a93..468c079f3c2b 100644
--- a/arch/arm/boot/dts/imx23-pinfunc.h
+++ b/arch/arm/boot/dts/nxp/mxs/imx23-pinfunc.h
@@ -1,14 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Header providing constants for i.MX23 pinctrl bindings.
  *
  * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 #ifndef __DT_BINDINGS_MX23_PINCTRL_H__
diff --git a/arch/arm/boot/dts/imx23-sansa.dts b/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts
index 46057d9bf555..613f13b6c8a8 100644
--- a/arch/arm/boot/dts/imx23-sansa.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts
@@ -55,7 +55,7 @@
 	};
 
 	apb@80000000 {
-		apbh@80000000 {
+		apbh-bus@80000000 {
 			ssp0: spi@80010000 {
 				compatible = "fsl,imx23-mmc";
 				pinctrl-names = "default";
@@ -93,14 +93,14 @@
 						MX23_PAD_LCD_HSYNC__GPIO_1_24
 						MX23_PAD_PWM3__GPIO_1_29
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 			};
 		};
 
-		apbx@80040000 {
+		apbx-bus@80040000 {
 			pwm: pwm@80064000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pwm2_pins_a>;
@@ -166,7 +166,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm 2 5000000>;
+		pwms = <&pwm 2 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 	};
@@ -175,10 +175,8 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "i2c-gpio";
-		gpios = <
-			&gpio1 24 0		/* SDA */
-			&gpio1 22 0		/* SCL */
-		>;
+		sda-gpios = <&gpio1 24 0>;
+		scl-gpios = <&gpio1 22 0>;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
 	};
 
@@ -186,10 +184,8 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "i2c-gpio";
-		gpios = <
-			&gpio0 31 0		/* SDA */
-			&gpio0 30 0		/* SCL */
-		>;
+		sda-gpios = <&gpio0 31 0>;
+		scl-gpios = <&gpio0 30 0>;
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
 
 		touch: touch@20 {
diff --git a/arch/arm/boot/dts/imx23-stmp378x_devb.dts b/arch/arm/boot/dts/nxp/mxs/imx23-stmp378x_devb.dts
index da4b88f32eaa..b2b6f8514999 100644
--- a/arch/arm/boot/dts/imx23-stmp378x_devb.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx23-stmp378x_devb.dts
@@ -16,7 +16,7 @@
 	};
 
 	apb@80000000 {
-		apbh@80000000 {
+		apbh-bus@80000000 {
 			ssp0: spi@80010000 {
 				compatible = "fsl,imx23-mmc";
 				pinctrl-names = "default";
@@ -44,7 +44,7 @@
 			};
 		};
 
-		apbx@80040000 {
+		apbx-bus@80040000 {
 			auart0: serial@8006c000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&auart0_pins_a>;
@@ -59,18 +59,11 @@
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_vddio_sd0: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "vddio-sd0";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio1 29 0>;
-		};
+	reg_vddio_sd0: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio-sd0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 29 0>;
 	};
 };
diff --git a/arch/arm/boot/dts/imx23-xfi3.dts b/arch/arm/boot/dts/nxp/mxs/imx23-xfi3.dts
index a6213c590f94..fad08f6c008f 100644
--- a/arch/arm/boot/dts/imx23-xfi3.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx23-xfi3.dts
@@ -54,7 +54,7 @@
 	};
 
 	apb@80000000 {
-		apbh@80000000 {
+		apbh-bus@80000000 {
 			ssp0: spi@80010000 {
 				compatible = "fsl,imx23-mmc";
 				pinctrl-names = "default";
@@ -83,9 +83,9 @@
 					fsl,pinmux-ids = <
 						MX23_PAD_GPMI_D07__GPIO_0_7
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				key_pins_a: keys@0 {
@@ -94,14 +94,14 @@
 						MX23_PAD_ROTARYA__GPIO_2_7
 						MX23_PAD_ROTARYB__GPIO_2_8
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 			};
 		};
 
-		apbx@80040000 {
+		apbx-bus@80040000 {
 			i2c: i2c@80058000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&i2c_pins_a>;
@@ -153,24 +153,24 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm 2 5000000>;
+		pwms = <&pwm 2 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&key_pins_a>;
 
-		voldown {
+		key-voldown {
 			label = "volume-down";
 			linux,code = <114>;
 			gpios = <&gpio2 7 0>;
 			debounce-interval = <20>;
 		};
 
-		volup {
+		key-volup {
 			label = "volume-up";
 			linux,code = <115>;
 			gpios = <&gpio2 8 0>;
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/nxp/mxs/imx23.dtsi
index 7f4c602454a5..5e21252fb7c9 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/nxp/mxs/imx23.dtsi
@@ -45,7 +45,7 @@
 		reg = <0x80000000 0x80000>;
 		ranges;
 
-		apbh@80000000 {
+		apbh-bus@80000000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -59,13 +59,11 @@
 				reg = <0x80000000 0x2000>;
 			};
 
-			dma_apbh: dma-apbh@80004000 {
+			dma_apbh: dma-controller@80004000 {
 				compatible = "fsl,imx23-dma-apbh";
 				reg = <0x80004000 0x2000>;
-				interrupts = <0 14 20 0
-					      13 13 13 13>;
-				interrupt-names = "empty", "ssp0", "ssp1", "empty",
-						  "gpmi0", "gpmi1", "gpmi2", "gpmi3";
+				interrupts = <0>, <14>, <20>, <0>,
+					     <13>, <13>, <13>, <13>;
 				#dma-cells = <1>;
 				dma-channels = <8>;
 				clocks = <&clks 15>;
@@ -112,7 +110,7 @@
 				reg = <0x80018000 0x2000>;
 
 				gpio0: gpio@0 {
-					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+					compatible = "fsl,imx23-gpio";
 					reg = <0>;
 					interrupts = <16>;
 					gpio-controller;
@@ -122,7 +120,7 @@
 				};
 
 				gpio1: gpio@1 {
-					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+					compatible = "fsl,imx23-gpio";
 					reg = <1>;
 					interrupts = <17>;
 					gpio-controller;
@@ -132,7 +130,7 @@
 				};
 
 				gpio2: gpio@2 {
-					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+					compatible = "fsl,imx23-gpio";
 					reg = <2>;
 					interrupts = <18>;
 					gpio-controller;
@@ -414,13 +412,13 @@
 				status = "disabled";
 			};
 
-			dma_apbx: dma-apbx@80024000 {
+			dma_apbx: dma-controller@80024000 {
 				compatible = "fsl,imx23-dma-apbx";
 				reg = <0x80024000 0x2000>;
-				interrupts = <7 5 9 26
-					      19 0 25 23
-					      60 58 9 0
-					      0 0 0 0>;
+				interrupts = <7>, <5>, <9>, <26>,
+					     <19>, <0>, <25>, <23>,
+					     <60>, <58>, <9>, <0>,
+					     <0>, <0>, <0>, <0>;
 				interrupt-names = "audio-adc", "audio-dac", "spdif-tx", "i2c",
 						  "saif0", "empty", "auart0-rx", "auart0-tx",
 						  "auart1-rx", "auart1-tx", "saif1", "empty",
@@ -433,7 +431,7 @@
 			dcp: crypto@80028000 {
 				compatible = "fsl,imx23-dcp";
 				reg = <0x80028000 0x2000>;
-				interrupts = <53 54>;
+				interrupts = <53>, <54>;
 				status = "okay";
 			};
 
@@ -458,7 +456,7 @@
 			lcdif@80030000 {
 				compatible = "fsl,imx23-lcdif";
 				reg = <0x80030000 2000>;
-				interrupts = <46 45>;
+				interrupts = <46>, <45>;
 				clocks = <&clks 38>;
 				status = "disabled";
 			};
@@ -478,7 +476,7 @@
 			};
 		};
 
-		apbx@80040000 {
+		apbx-bus@80040000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -486,7 +484,7 @@
 			ranges;
 
 			clks: clkctrl@80040000 {
-				compatible = "fsl,imx23-clkctrl", "fsl,clkctrl";
+				compatible = "fsl,imx23-clkctrl";
 				reg = <0x80040000 0x2000>;
 				#clock-cells = <1>;
 			};
@@ -527,7 +525,8 @@
 			lradc: lradc@80050000 {
 				compatible = "fsl,imx23-lradc";
 				reg = <0x80050000 0x2000>;
-				interrupts = <36 37 38 39 40 41 42 43 44>;
+				interrupts = <36>, <37>, <38>, <39>, <40>,
+					     <41>, <42>, <43>, <44>;
 				status = "disabled";
 				clocks = <&clks 26>;
 				#io-channel-cells = <1>;
@@ -562,7 +561,7 @@
 				compatible = "fsl,imx23-pwm";
 				reg = <0x80064000 0x2000>;
 				clocks = <&clks 30>;
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				fsl,pwm-number = <5>;
 				status = "disabled";
 			};
@@ -570,7 +569,7 @@
 			timrot@80068000 {
 				compatible = "fsl,imx23-timrot", "fsl,timrot";
 				reg = <0x80068000 0x2000>;
-				interrupts = <28 29 30 31>;
+				interrupts = <28>, <29>, <30>, <31>;
 				clocks = <&clks 28>;
 			};
 
@@ -599,7 +598,7 @@
 				reg = <0x80070000 0x2000>;
 				interrupts = <0>;
 				clocks = <&clks 32>, <&clks 16>;
-				clock-names = "uart", "apb_pclk";
+				clock-names = "uartclk", "apb_pclk";
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dts b/arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dts
new file mode 100644
index 000000000000..ddb64f3d0471
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dts
@@ -0,0 +1,350 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 Amarula Solutions, Dario Binacchi <dario.binacchi@amarulasolutions.com>
+ */
+
+/dts-v1/;
+
+#include "imx28.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "amarula,imx28-rmm", "fsl,imx28";
+	model = "Amarula i.MX28 rmm";
+
+	memory@40000000 {
+		reg = <0x40000000 0x08000000>;
+		device_type = "memory";
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 4 5000000 0>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <255>;
+		default-brightness-level = <255>;
+		power-supply = <&reg_5v>;
+	};
+
+	beeper {
+		compatible = "pwm-beeper";
+		pwms = <&pwm 7 100000 0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins>;
+
+		led-0 {
+			gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-1 {
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-2 {
+			gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_fec_3v3: regulator-fec-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&fec_3v3_enable_pin>;
+		regulator-name = "fec-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <300000>;
+		vin-supply = <&reg_5v>;
+	};
+
+	reg_usb0_vbus: regulator-usb0-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb0_vbus_enable_pin>;
+		regulator-name = "usb0_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb1_vbus_enable_pin>;
+		regulator-name = "usb1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "imx28-mrmmi-tlv320aic3x-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&cpu_dai>;
+		simple-audio-card,frame-master = <&cpu_dai>;
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"Headphone Jack", "HPROUT",
+			"Headphone Jack", "HPRCOM";
+		simple-audio-card,mclk-fs = <512>;
+
+		cpu_dai: simple-audio-card,cpu {
+			sound-dai = <&saif0>;
+			clocks = <&saif0>;
+		};
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3x>;
+		};
+	};
+};
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_2pins_a>;
+	status = "okay";
+};
+
+&auart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart1_pins_a>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can0_pins_a>;
+	status = "okay";
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_b>;
+	status = "okay";
+};
+
+&duart_pins_b {
+	fsl,voltage = <MXS_VOLTAGE_LOW>;
+};
+
+&gpmi {
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	tlv320aic3x: audio-codec@18 {
+		compatible = "ti,tlv320aic3x";
+		pinctrl-names = "default";
+		pinctrl-0 = <&tlv320aic3x_pins>;
+		reg = <0x18>;
+		reset-gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		DVDD-supply = <&reg_1v8>;
+		IOVDD-supply = <&reg_3v3>;
+		AVDD-supply = <&reg_3v3>;
+		DRVDD-supply = <&reg_3v3>;
+	};
+
+	touchscreen: touchscreen@38 {
+		compatible = "edt,edt-ft5306";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&edt_ft5x06_pins &edt_ft5x06_wake_pin>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <19 IRQ_TYPE_EDGE_RISING>;
+		reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		wake-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&lradc {
+	status = "okay";
+};
+
+&mac0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	phy-mode = "rmii";
+	phy-supply = <&reg_fec_3v3>;
+	phy-handle = <&ethphy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			max-speed = <100>;
+			reset-gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <4000>;
+			reset-deassert-us = <4000>;
+		};
+	};
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	edt_ft5x06_pins: edt-ft5x06@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_RDY1__GPIO_0_21 /* Reset */
+			MX28_PAD_GPMI_CE3N__GPIO_0_19 /* Interrupt */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+	};
+
+	edt_ft5x06_wake_pin: edt-ft5x06-wake@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <MX28_PAD_GPMI_CE2N__GPIO_0_18>;
+		fsl,drive-strength = <MXS_DRIVE_16mA>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+	};
+
+	fec_3v3_enable_pin: fec-3v3-enable@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <MX28_PAD_SPDIF__GPIO_3_27>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+	};
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP2_SS1__GPIO_2_20  /* External power */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+	};
+
+	leds_pins: leds@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP0_DATA7__GPIO_2_7
+			MX28_PAD_PWM0__GPIO_3_16
+			MX28_PAD_PWM1__GPIO_3_17
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+	};
+
+	tlv320aic3x_pins: tlv320aic3x-pins@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <MX28_PAD_SSP0_DATA4__GPIO_2_4>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+	};
+
+	usb0_vbus_enable_pin: usb0-vbus-enable@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <MX28_PAD_SSP0_DATA5__GPIO_2_5>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+	};
+
+	usb1_vbus_enable_pin: usb1-vbus-enable@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <MX28_PAD_SSP0_DATA6__GPIO_2_6>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm4_pins_a &pwm7_pins_a>;
+	status = "okay";
+};
+
+&saif0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif0_pins_a>;
+	status = "okay";
+};
+
+/* microSD */
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>;
+	broken-cd;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&usb0 {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-apf28.dts b/arch/arm/boot/dts/nxp/mxs/imx28-apf28.dts
new file mode 100644
index 000000000000..98672932e41b
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-apf28.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Armadeus Systems - <support@armadeus.com>
+ */
+
+/dts-v1/;
+#include "imx28.dtsi"
+
+/ {
+	model = "Armadeus Systems APF28 module";
+	compatible = "armadeus,imx28-apf28", "fsl,imx28";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x08000000>;
+	};
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0 0x300000>;
+	};
+
+	partition@300000 {
+		label = "env";
+		reg = <0x300000 0x80000>;
+	};
+
+	partition@380000 {
+		label = "env2";
+		reg = <0x380000 0x80000>;
+	};
+
+	partition@400000 {
+		label = "dtb";
+		reg = <0x400000 0x80000>;
+	};
+
+	partition@480000 {
+		label = "splash";
+		reg = <0x480000 0x80000>;
+	};
+
+	partition@500000 {
+		label = "kernel";
+		reg = <0x500000 0x800000>;
+	};
+
+	partition@d00000 {
+		label = "rootfs";
+		reg = <0xd00000 0xf300000>;
+	};
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-apf28dev.dts b/arch/arm/boot/dts/nxp/mxs/imx28-apf28dev.dts
new file mode 100644
index 000000000000..6c87266eb135
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-apf28dev.dts
@@ -0,0 +1,209 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Armadeus Systems - <support@armadeus.com>
+ */
+
+/* APF28Dev is a docking board for the APF28 SOM */
+#include "imx28-apf28.dts"
+
+/ {
+	model = "Armadeus Systems APF28Dev docking/development board";
+	compatible = "armadeus,imx28-apf28dev", "armadeus,imx28-apf28", "fsl,imx28";
+
+	reg_usb0_vbus: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb0_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 23 1>;
+		enable-active-high;
+	};
+
+	reg_can0_vcc: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "can0_vcc";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user {
+			label = "Heartbeat";
+			gpios = <&gpio0 21 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+
+		pwms = <&pwm 3 191000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		user-button {
+			label = "User button";
+			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+			linux,code = <0x100>;
+			wakeup-source;
+		};
+	};
+};
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_pins_a>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can0_pins_a>;
+	xceiver-supply = <&reg_can0_vcc>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_16bit_pins_a
+		     &lcdif_pins_apf28dev>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <16>;
+		bus-width = <16>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <33000033>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <96>;
+				hfront-porch = <96>;
+				vback-porch = <20>;
+				vfront-porch = <21>;
+				hsync-len = <64>;
+				vsync-len = <4>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&lradc {
+	fsl,lradc-touchscreen-wires = <4>;
+	status = "okay";
+};
+
+&mac1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac1_pins_a>;
+	phy-reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_apf28dev>;
+
+	hog_pins_apf28dev: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D16__GPIO_1_16
+			MX28_PAD_LCD_D17__GPIO_1_17
+			MX28_PAD_LCD_D18__GPIO_1_18
+			MX28_PAD_LCD_D19__GPIO_1_19
+			MX28_PAD_LCD_D20__GPIO_1_20
+			MX28_PAD_LCD_D21__GPIO_1_21
+			MX28_PAD_LCD_D22__GPIO_1_22
+			MX28_PAD_GPMI_CE1N__GPIO_0_17
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_apf28dev: lcdif-apf28dev@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+			MX28_PAD_LCD_RS__LCD_DOTCLK
+			MX28_PAD_LCD_CS__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	usb0_otg_apf28dev: otg-apf28dev@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D23__GPIO_1_23
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm3_pins_a &pwm4_pins_a>;
+	status = "okay";
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a
+		     &mmc0_cd_cfg &mmc0_sck_cfg>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ssp2 {
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	status = "okay";
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_otg_apf28dev
+		     &usb0_id_pins_b>;
+	vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-apx4devkit.dts b/arch/arm/boot/dts/nxp/mxs/imx28-apx4devkit.dts
new file mode 100644
index 000000000000..0d845ca81e89
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-apx4devkit.dts
@@ -0,0 +1,226 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "imx28.dtsi"
+
+/ {
+	model = "Bluegiga APX4 Development Kit";
+	compatible = "bluegiga,apx4devkit", "fsl,imx28";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x04000000>;
+	};
+
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "bluegiga,apx4devkit-sgtl5000",
+			     "fsl,mxs-audio-sgtl5000";
+		model = "apx4devkit-sgtl5000";
+		saif-controllers = <&saif0 &saif1>;
+		audio-codec = <&sgtl5000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user {
+			label = "Heartbeat";
+			gpios = <&gpio3 28 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_pins_a>;
+	status = "okay";
+};
+
+&auart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart1_2pins_a>;
+	status = "okay";
+};
+
+&auart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart2_2pins_a>;
+	status = "okay";
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_24bit_pins_a
+		     &lcdif_pins_apx4>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <30000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hfront-porch = <40>;
+				vback-porch = <32>;
+				vfront-porch = <13>;
+				hsync-len = <48>;
+				vsync-len = <3>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+		clocks = <&saif0>;
+	};
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_CE1N__GPIO_0_17
+			MX28_PAD_GPMI_RDY1__GPIO_0_21
+			MX28_PAD_SSP2_MISO__GPIO_2_18
+			MX28_PAD_SSP2_SS0__AUART3_TX /* was: 0x2131 - MX28_PAD_SSP2_SS0__GPIO_2_19 */
+			MX28_PAD_PWM3__GPIO_3_28
+			MX28_PAD_LCD_RESET__GPIO_3_30
+			MX28_PAD_JTAG_RTCK__GPIO_4_20
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_apx4: lcdif-apx4@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+			MX28_PAD_LCD_RS__LCD_DOTCLK
+			MX28_PAD_LCD_CS__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP0_DATA4__SSP2_D0
+			MX28_PAD_SSP0_DATA5__SSP2_D3
+			MX28_PAD_SSP0_DATA6__SSP2_CMD
+			MX28_PAD_SSP0_DATA7__SSP2_SCK
+			MX28_PAD_SSP2_SS1__SSP2_D1
+			MX28_PAD_SSP2_SS2__SSP2_D2
+		>;
+		fsl,drive-strength = <MXS_DRIVE_8mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP0_DATA7__SSP2_SCK
+		>;
+		fsl,drive-strength = <MXS_DRIVE_12mA>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&saif0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif0_pins_a>;
+	status = "okay";
+};
+
+&saif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif1_pins_a>;
+	fsl,saif-master = <&saif0>;
+	status = "okay";
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ssp2 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_4bit_pins_apx4 &mmc2_sck_cfg_apx4>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&usb1 {
+      status = "okay";
+};
+
+&usbphy1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-btt3-0.dts b/arch/arm/boot/dts/nxp/mxs/imx28-btt3-0.dts
new file mode 100644
index 000000000000..6ac46e4b21bb
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-btt3-0.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2024
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+#include "imx28-btt3.dtsi"
+
+&hog_pins_rev {
+	fsl,pull-up = <MXS_PULL_ENABLE>;
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-btt3-1.dts b/arch/arm/boot/dts/nxp/mxs/imx28-btt3-1.dts
new file mode 100644
index 000000000000..213fe931c58b
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-btt3-1.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2024
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+#include "imx28-btt3.dtsi"
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-btt3-2.dts b/arch/arm/boot/dts/nxp/mxs/imx28-btt3-2.dts
new file mode 100644
index 000000000000..4bccd784d065
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-btt3-2.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2024
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+#include "imx28-btt3.dtsi"
+
+/ {
+	panel {
+		compatible = "powertip,st7272", "panel-dpi";
+		power-supply = <&reg_3v3>;
+		width-mm = <70>;
+		height-mm = <52>;
+
+		panel-timing {
+			clock-frequency = <6500000>;
+			hactive = <320>;
+			vactive = <240>;
+			hfront-porch = <20>;
+			hback-porch = <68>;
+			hsync-len = <30>;
+			vfront-porch = <4>;
+			vback-porch = <14>;
+			vsync-len = <4>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-btt3.dtsi b/arch/arm/boot/dts/nxp/mxs/imx28-btt3.dtsi
new file mode 100644
index 000000000000..a6903ef2b093
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-btt3.dtsi
@@ -0,0 +1,313 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2024
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+/dts-v1/;
+#include "imx28-lwe.dtsi"
+
+/ {
+	model = "BTT3";
+
+	compatible = "lwn,imx28-btt3", "fsl,imx28";
+
+	chosen {
+	       bootargs = "root=/dev/mmcblk0p2 rootfstype=ext4 ro rootwait console=ttyAMA0,115200 panic=1 quiet";
+	};
+
+	memory@40000000 {
+		reg = <0x40000000 0x10000000>;
+		device_type = "memory";
+	};
+
+	panel {
+		compatible = "powertip,hx8238a", "panel-dpi";
+		power-supply = <&reg_3v3>;
+		width-mm = <70>;
+		height-mm = <52>;
+
+		panel-timing {
+			clock-frequency = <6500000>;
+			hactive = <320>;
+			vactive = <240>;
+			hfront-porch = <20>;
+			hback-porch = <38>;
+			hsync-len = <30>;
+			vfront-porch = <4>;
+			vback-porch = <14>;
+			vsync-len = <4>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <0>;
+			pixelclk-active = <1>;
+		};
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
+	poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "BTTC Audio";
+		simple-audio-card,widgets = "Speaker", "BTTC Speaker";
+		simple-audio-card,routing = "BTTC Speaker", "SPKOUTN", "BTTC Speaker", "SPKOUTP";
+
+		simple-audio-card,dai-link@0 {
+			format = "left_j";
+			bitclock-master = <&dai0_master>;
+			frame-master = <&dai0_master>;
+			mclk-fs = <256>;
+
+			dai0_master: cpu {
+				sound-dai = <&saif0>;
+			};
+
+			codec {
+				sound-dai = <&wm89xx>;
+				clocks = <&saif0>;
+			};
+		};
+	};
+
+	wifi_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_en_pin_bttc>;
+		reset-gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
+		/* W1-163 needs 60us for WL_EN to be low and */
+		/* 150ms after high before downloading FW is possible */
+		post-power-on-delay-ms = <200>;
+		power-off-delay-us = <100>;
+	};
+};
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_2pins_a>;
+	status = "okay";
+};
+
+&auart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart3_pins_a>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&i2c0 {
+	wm89xx: audio-codec@1a {
+		compatible = "wlf,wm8940";
+		reg = <0x1a>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_24bit_pins_a>, <&lcdif_sync_pins_bttc>,
+		    <&lcdif_reset_pins_bttc>;
+	status = "okay";
+
+	port {
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&mac0 {
+	clocks = <&clks 57>, <&clks 57>, <&clks 64>;
+	clock-names = "ipg", "ahb", "enet_out";
+	phy-handle = <&mac0_phy>;
+	phy-mode = "rmii";
+	phy-supply = <&reg_3v3>;
+	/*
+	 * This MAC address is adjusted during production.
+	 * Value specified below is used as a fallback during recovery.
+	 */
+	local-mac-address = [ 00 11 B8 00 BF 8A ];
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mac0_phy: ethernet-phy@0 {
+			/* LAN8720Ai - PHY ID */
+			compatible = "ethernet-phy-id0007.c0f0","ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			smsc,disable-energy-detect;
+			max-speed = <100>;
+			reset-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <1000>;
+			reset-deassert-us = <1000>;
+		};
+	};
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>, <&hog_pins_rev>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_RDY2__GPIO_0_22
+			MX28_PAD_GPMI_RDY3__GPIO_0_23
+			MX28_PAD_GPMI_RDN__GPIO_0_24
+			MX28_PAD_LCD_VSYNC__GPIO_1_28
+			MX28_PAD_SSP2_SS1__GPIO_2_20
+			MX28_PAD_SSP2_SS2__GPIO_2_21
+			MX28_PAD_AUART2_CTS__GPIO_3_10
+			MX28_PAD_AUART2_RTS__GPIO_3_11
+			MX28_PAD_GPMI_WRN__GPIO_0_25
+			MX28_PAD_ENET0_RXD2__GPIO_4_9
+			MX28_PAD_ENET0_TXD2__GPIO_4_11
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	hog_pins_rev: hog@1 {
+		reg = <1>;
+		fsl,pinmux-ids = <
+			MX28_PAD_ENET0_RXD3__GPIO_4_10
+			MX28_PAD_ENET0_TX_CLK__GPIO_4_5
+			MX28_PAD_ENET0_COL__GPIO_4_14
+			MX28_PAD_ENET0_CRS__GPIO_4_15
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	keypad_pins_bttc: keypad-bttc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_D00__GPIO_0_0
+			MX28_PAD_AUART0_CTS__GPIO_3_2
+			MX28_PAD_AUART0_RTS__GPIO_3_3
+			MX28_PAD_GPMI_D03__GPIO_0_3
+			MX28_PAD_GPMI_D04__GPIO_0_4
+			MX28_PAD_GPMI_D05__GPIO_0_5
+			MX28_PAD_GPMI_D06__GPIO_0_6
+			MX28_PAD_GPMI_D07__GPIO_0_7
+			MX28_PAD_GPMI_CE1N__GPIO_0_17
+			MX28_PAD_GPMI_CE2N__GPIO_0_18
+			MX28_PAD_GPMI_CE3N__GPIO_0_19
+			MX28_PAD_GPMI_RDY0__GPIO_0_20
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_sync_pins_bttc: lcdif-bttc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
+			MX28_PAD_LCD_ENABLE__LCD_ENABLE
+			MX28_PAD_LCD_HSYNC__LCD_HSYNC
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_reset_pins_bttc: lcdif-bttc@1 {
+		reg = <1>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RESET__GPIO_3_30
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	ssp1_sdio_pins_a: ssp1-sdio@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP1_DATA0__SSP1_D0
+			MX28_PAD_GPMI_D01__SSP1_D1
+			MX28_PAD_GPMI_D02__SSP1_D2
+			MX28_PAD_SSP1_DATA3__SSP1_D3
+			MX28_PAD_SSP1_CMD__SSP1_CMD
+			MX28_PAD_SSP1_SCK__SSP1_SCK
+		>;
+		fsl,drive-strength = <MXS_DRIVE_8mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	wifi_en_pin_bttc: wifi-en-pin@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_CLE__GPIO_0_27
+		>;
+		fsl,drive-strength = <MXS_DRIVE_8mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm3_pins_a>;
+	status = "okay";
+};
+
+&reg_usb_5v {
+	gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+};
+
+&saif0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif0_pins_a>;
+	#sound-dai-cells = <0>;
+	assigned-clocks = <&clks 53>;
+	assigned-clock-rates = <12000000>;
+	status = "okay";
+};
+
+&saif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif1_pins_a>;
+	#sound-dai-cells = <0>;
+	fsl,saif-master = <&saif0>;
+	status = "okay";
+};
+
+&ssp1 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ssp1_sdio_pins_a>;
+	bus-width = <4>;
+	no-1-8-v;       /* force 3.3V VIO */
+	non-removable;
+	vmmc-supply = <&reg_3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	keep-power-in-suspend;
+	status = "okay";
+
+	wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+&ssp2 {
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10036.dts b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10036.dts
new file mode 100644
index 000000000000..f170df37b3f8
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10036.dts
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Free Electrons
+ */
+
+/dts-v1/;
+#include "imx28.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Crystalfontz CFA-10036 Board";
+	compatible = "crystalfontz,cfa10036", "fsl,imx28";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_cfa10036>;
+
+		power {
+			gpios = <&gpio3 4 1>;
+			default-state = "on";
+		};
+	};
+
+	reg_vddio_sd0: vddio-sd0 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&mmc_pwr_cfa10036>;
+		regulator-name = "vddio-sd0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 28 0>;
+	};
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_b>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_b>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	ssd1306: oled@3c {
+		compatible = "solomon,ssd1306fb-i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ssd1306_cfa10036>;
+		reg = <0x3c>;
+		reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+		solomon,height = <32>;
+		solomon,width = <128>;
+		solomon,page-offset = <0>;
+		solomon,com-lrremap;
+		solomon,com-invdir;
+		solomon,com-offset = <32>;
+	};
+};
+
+&pinctrl {
+	ssd1306_cfa10036: ssd1306-10036@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP0_DATA7__GPIO_2_7
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	led_pins_cfa10036: leds-10036@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_AUART1_RX__GPIO_3_4
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	usb0_otg_cfa10036: otg-10036@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_RDY0__USB0_ID
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	mmc_pwr_cfa10036: mmc_pwr_cfa10036@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			0x31c3 /*
+			MX28_PAD_PWM3__GPIO_3_28 */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a
+		&mmc0_cd_cfg &mmc0_sck_cfg>;
+	vmmc-supply = <&reg_vddio_sd0>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_otg_cfa10036>;
+	dr_mode = "peripheral";
+	phy_type = "utmi";
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-cfa10037.dts b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10037.dts
index d3e9a731525b..fd177daa6385 100644
--- a/arch/arm/boot/dts/imx28-cfa10037.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10037.dts
@@ -14,7 +14,7 @@
 	compatible = "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
 
 	apb@80000000 {
-		apbh@80000000 {
+		apbh-bus@80000000 {
 			pinctrl@80018000 {
 				usb_pins_cfa10037: usb-10037@0 {
 					reg = <0>;
@@ -38,7 +38,7 @@
 			};
 		};
 
-		apbx@80040000 {
+		apbx-bus@80040000 {
 			usbphy1: usbphy@8007e000 {
 				status = "okay";
 			};
@@ -64,20 +64,13 @@
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb1_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb_pins_cfa10037>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio0 7 1>;
-		};
+	reg_usb1_vbus: regulator-0 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_pins_cfa10037>;
+		regulator-name = "usb1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio0 7 1>;
 	};
 };
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10049.dts b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10049.dts
new file mode 100644
index 000000000000..f0ce897b9d5c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10049.dts
@@ -0,0 +1,411 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Free Electrons
+ */
+
+/*
+ * The CFA-10049 is an expansion board for the CFA-10036 module, thus we
+ * need to include the CFA-10036 DTS.
+ */
+#include "imx28-cfa10036.dts"
+
+/ {
+	model = "Crystalfontz CFA-10049 Board";
+	compatible = "crystalfontz,cfa10049", "crystalfontz,cfa10036", "fsl,imx28";
+
+	i2cmux {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2cmux_pins_cfa10049>;
+		mux-gpios = <&gpio1 22 0 &gpio1 23 0>;
+		i2c-parent = <&i2c1>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			adc0: nau7802@2a {
+				compatible = "nuvoton,nau7802";
+				reg = <0x2a>;
+				nuvoton,vldo = <3000>;
+			};
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			adc1: nau7802@2a {
+				compatible = "nuvoton,nau7802";
+				reg = <0x2a>;
+				nuvoton,vldo = <3000>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+				adc2: nau7802@2a {
+				compatible = "nuvoton,nau7802";
+				reg = <0x2a>;
+				nuvoton,vldo = <3000>;
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pca9555: pca9555@20 {
+				compatible = "nxp,pca9555";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pca_pins_cfa10049>;
+				interrupt-parent = <&gpio2>;
+				interrupts = <19 0x2>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x20>;
+			};
+		};
+	};
+
+	reg_usb1_vbus: regulator-0 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_pins_cfa10049>;
+		regulator-name = "usb1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio0 7 1>;
+	};
+
+	spi-2 {
+		compatible = "spi-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi2_pins_cfa10049>;
+		status = "okay";
+		sck-gpios = <&gpio2 16 0>;
+		mosi-gpios = <&gpio2 17 0>;
+		miso-gpios = <&gpio2 18 0>;
+		cs-gpios = <&gpio3 5 0>;
+		num-chipselects = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hx8357: hx8357@0 {
+			compatible = "himax,hx8357b", "himax,hx8357";
+			reg = <0>;
+			spi-max-frequency = <100000>;
+			spi-cpol;
+			spi-cpha;
+			gpios-reset = <&gpio3 30 0>;
+			im-gpios = <&gpio5 4 0 &gpio5 5 0 &gpio5 6 0>;
+		};
+	};
+
+	spi-3 {
+		compatible = "spi-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi3_pins_cfa10049>;
+		status = "okay";
+		sck-gpios = <&gpio0 24 0>;
+		mosi-gpios = <&gpio0 28 0>;
+		cs-gpios = <&gpio0 17 0 &gpio0 26 0 &gpio0 27 0>;
+		num-chipselects = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio5: gpio5@0 {
+			compatible = "fairchild,74hc595";
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0>;
+			registers-number = <2>;
+			spi-max-frequency = <100000>;
+		};
+
+		gpio6: gpio6@1 {
+			compatible = "fairchild,74hc595";
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <1>;
+			registers-number = <4>;
+			spi-max-frequency = <100000>;
+		};
+
+		dac0: dh2228@2 {
+			compatible = "rohm,dh2228fv";
+			reg = <2>;
+			spi-max-frequency = <100000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&rotary_btn_pins_cfa10049>;
+
+		rotary-button {
+			label = "rotary_button";
+			gpios = <&gpio3 26 1>;
+			debounce-interval = <10>;
+			linux,code = <28>;
+		};
+	};
+
+	rotary {
+		compatible = "rotary-encoder";
+		pinctrl-names = "default";
+		pinctrl-0 = <&rotary_pins_cfa10049>;
+		gpios = <&gpio3 24 1>, <&gpio3 25 1>;
+		linux,axis = <1>; /* REL_Y */
+		rotary-encoder,relative-axis;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 3 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+
+	};
+
+	onewire {
+		compatible = "w1-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&w1_gpio_pins>;
+		status = "okay";
+		gpios = <&gpio1 21 0>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_18bit_pins_cfa10049
+		     &lcdif_pins_cfa10049
+		     &lcdif_pins_cfa10049_pullup>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <18>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <9216000>;
+				hactive = <320>;
+				vactive = <480>;
+				hback-porch = <2>;
+				hfront-porch = <2>;
+				vback-porch = <2>;
+				vfront-porch = <2>;
+				hsync-len = <15>;
+				vsync-len = <15>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&lradc {
+	fsl,lradc-touchscreen-wires = <4>;
+	status = "okay";
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a
+		&mac0_pins_cfa10049>;
+	phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <100>;
+	status = "okay";
+};
+
+&pinctrl {
+	usb_pins_cfa10049: usb-10049@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_D07__GPIO_0_7
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	i2cmux_pins_cfa10049: i2cmux-10049@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D22__GPIO_1_22
+			MX28_PAD_LCD_D23__GPIO_1_23
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	mac0_pins_cfa10049: mac0-10049@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP2_SS2__GPIO_2_21
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	pca_pins_cfa10049: pca-10049@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP2_SS0__GPIO_2_19
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	rotary_pins_cfa10049: rotary-10049@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_I2C0_SCL__GPIO_3_24
+			MX28_PAD_I2C0_SDA__GPIO_3_25
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	rotary_btn_pins_cfa10049: rotary-btn-10049@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SAIF1_SDATA0__GPIO_3_26
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	spi2_pins_cfa10049: spi2-cfa10049@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP2_SCK__GPIO_2_16
+			MX28_PAD_SSP2_MOSI__GPIO_2_17
+			MX28_PAD_SSP2_MISO__GPIO_2_18
+			MX28_PAD_AUART1_TX__GPIO_3_5
+		>;
+		fsl,drive-strength = <MXS_DRIVE_8mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	spi3_pins_cfa10049: spi3-cfa10049@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_RDN__GPIO_0_24
+			MX28_PAD_GPMI_RESETN__GPIO_0_28
+			MX28_PAD_GPMI_CE1N__GPIO_0_17
+			MX28_PAD_GPMI_ALE__GPIO_0_26
+			MX28_PAD_GPMI_CLE__GPIO_0_27
+		>;
+		fsl,drive-strength = <MXS_DRIVE_8mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	lcdif_18bit_pins_cfa10049: lcdif-18bit@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D00__LCD_D0
+			MX28_PAD_LCD_D01__LCD_D1
+			MX28_PAD_LCD_D02__LCD_D2
+			MX28_PAD_LCD_D03__LCD_D3
+			MX28_PAD_LCD_D04__LCD_D4
+			MX28_PAD_LCD_D05__LCD_D5
+			MX28_PAD_LCD_D06__LCD_D6
+			MX28_PAD_LCD_D07__LCD_D7
+			MX28_PAD_LCD_D08__LCD_D8
+			MX28_PAD_LCD_D09__LCD_D9
+			MX28_PAD_LCD_D10__LCD_D10
+			MX28_PAD_LCD_D11__LCD_D11
+			MX28_PAD_LCD_D12__LCD_D12
+			MX28_PAD_LCD_D13__LCD_D13
+			MX28_PAD_LCD_D14__LCD_D14
+			MX28_PAD_LCD_D15__LCD_D15
+			MX28_PAD_LCD_D16__LCD_D16
+			MX28_PAD_LCD_D17__LCD_D17
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_cfa10049: lcdif-evk@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+			MX28_PAD_LCD_RS__LCD_DOTCLK
+			MX28_PAD_LCD_CS__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RESET__GPIO_3_30
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	w1_gpio_pins: w1-gpio@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D21__GPIO_1_21
+		>;
+		fsl,drive-strength = <MXS_DRIVE_8mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>; /* 0 will enable the keeper */
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm3_pins_b>;
+	status = "okay";
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	pinctrl-0 = <&usb1_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10055.dts b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10055.dts
new file mode 100644
index 000000000000..cb68edd6101b
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10055.dts
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Crystalfontz America, Inc.
+ * 				  Free Electrons
+ */
+
+/*
+ * The CFA-10055 is an expansion board for the CFA-10036 module and
+ * CFA-10037, thus we need to include the CFA-10037 DTS.
+ */
+#include "imx28-cfa10037.dts"
+
+/ {
+	model = "Crystalfontz CFA-10055 Board";
+	compatible = "crystalfontz,cfa10055", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
+
+	spi-2 {
+		compatible = "spi-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi2_pins_cfa10055>;
+		status = "okay";
+		sck-gpios = <&gpio2 16 0>;
+		mosi-gpios = <&gpio2 17 0>;
+		miso-gpios = <&gpio2 18 0>;
+		cs-gpios = <&gpio3 5 0>;
+		num-chipselects = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hx8357: hx8357@0 {
+			compatible = "himax,hx8357b", "himax,hx8357";
+			reg = <0>;
+			spi-max-frequency = <100000>;
+			spi-cpol;
+			spi-cpha;
+			gpios-reset = <&gpio3 30 0>;
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 3 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_18bit_pins_cfa10055
+		     &lcdif_pins_cfa10055
+		     &lcdif_pins_cfa10055_pullup>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <18>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <9216000>;
+				hactive = <320>;
+				vactive = <480>;
+				hback-porch = <2>;
+				hfront-porch = <2>;
+				vback-porch = <2>;
+				vfront-porch = <2>;
+				hsync-len = <15>;
+				vsync-len = <15>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&lradc {
+	fsl,lradc-touchscreen-wires = <4>;
+	status = "okay";
+};
+
+&pinctrl {
+	spi2_pins_cfa10055: spi2-cfa10055@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP2_SCK__GPIO_2_16
+			MX28_PAD_SSP2_MOSI__GPIO_2_17
+			MX28_PAD_SSP2_MISO__GPIO_2_18
+			MX28_PAD_AUART1_TX__GPIO_3_5
+		>;
+		fsl,drive-strength = <MXS_DRIVE_8mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	lcdif_18bit_pins_cfa10055: lcdif-18bit@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D00__LCD_D0
+			MX28_PAD_LCD_D01__LCD_D1
+			MX28_PAD_LCD_D02__LCD_D2
+			MX28_PAD_LCD_D03__LCD_D3
+			MX28_PAD_LCD_D04__LCD_D4
+			MX28_PAD_LCD_D05__LCD_D5
+			MX28_PAD_LCD_D06__LCD_D6
+			MX28_PAD_LCD_D07__LCD_D7
+			MX28_PAD_LCD_D08__LCD_D8
+			MX28_PAD_LCD_D09__LCD_D9
+			MX28_PAD_LCD_D10__LCD_D10
+			MX28_PAD_LCD_D11__LCD_D11
+			MX28_PAD_LCD_D12__LCD_D12
+			MX28_PAD_LCD_D13__LCD_D13
+			MX28_PAD_LCD_D14__LCD_D14
+			MX28_PAD_LCD_D15__LCD_D15
+			MX28_PAD_LCD_D16__LCD_D16
+			MX28_PAD_LCD_D17__LCD_D17
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_cfa10055: lcdif-evk@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+			MX28_PAD_LCD_RS__LCD_DOTCLK
+			MX28_PAD_LCD_CS__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RESET__GPIO_3_30
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm3_pins_b>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10056.dts b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10056.dts
new file mode 100644
index 000000000000..bc2d6fcad12f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10056.dts
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Free Electrons
+ */
+
+/*
+ * The CFA-10055 is an expansion board for the CFA-10036 module and
+ * CFA-10037, thus we need to include the CFA-10037 DTS.
+ */
+#include "imx28-cfa10037.dts"
+
+/ {
+	model = "Crystalfontz CFA-10056 Board";
+	compatible = "crystalfontz,cfa10056", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
+
+	spi-2 {
+		compatible = "spi-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi2_pins_cfa10056>;
+		status = "okay";
+		sck-gpios = <&gpio2 16 0>;
+		mosi-gpios = <&gpio2 17 0>;
+		miso-gpios = <&gpio2 18 0>;
+		cs-gpios = <&gpio3 5 0>;
+		num-chipselects = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hx8369: hx8369@0 {
+			compatible = "himax,hx8369a", "himax,hx8369";
+			reg = <0>;
+			spi-max-frequency = <100000>;
+			spi-cpol;
+			spi-cpha;
+			gpios-reset = <&gpio3 30 0>;
+		};
+	};
+};
+
+&pinctrl {
+	spi2_pins_cfa10056: spi2-cfa10056@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP2_SCK__GPIO_2_16
+			MX28_PAD_SSP2_MOSI__GPIO_2_17
+			MX28_PAD_SSP2_MISO__GPIO_2_18
+			MX28_PAD_AUART1_TX__GPIO_3_5
+		>;
+		fsl,drive-strength = <MXS_DRIVE_8mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	lcdif_pins_cfa10056: lcdif-10056@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+			MX28_PAD_LCD_RS__LCD_DOTCLK
+			MX28_PAD_LCD_CS__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RESET__GPIO_3_30
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_24bit_pins_a
+			&lcdif_pins_cfa10056
+			&lcdif_pins_cfa10056_pullup >;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <32000000>;
+				hactive = <480>;
+				vactive = <800>;
+				hback-porch = <2>;
+				hfront-porch = <2>;
+				vback-porch = <2>;
+				vfront-porch = <2>;
+				hsync-len = <5>;
+				vsync-len = <5>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10057.dts b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10057.dts
new file mode 100644
index 000000000000..5875c3d7ba97
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10057.dts
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Crystalfontz America, Inc.
+ * Copyright 2012 Free Electrons
+ */
+
+/*
+ * The CFA-10057 is an expansion board for the CFA-10036 module, thus we
+ * need to include the CFA-10036 DTS.
+ */
+#include "imx28-cfa10036.dts"
+
+/ {
+	model = "Crystalfontz CFA-10057 Board";
+	compatible = "crystalfontz,cfa10057", "crystalfontz,cfa10036", "fsl,imx28";
+
+	reg_usb1_vbus: regulator-0 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_pins_cfa10057>;
+		regulator-name = "usb1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio0 7 1>;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 4 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_18bit_pins_cfa10057
+		     &lcdif_pins_cfa10057>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <18>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <30000000>;
+				hactive = <480>;
+				vactive = <800>;
+				hfront-porch = <12>;
+				hback-porch = <2>;
+				vfront-porch = <5>;
+				vback-porch = <3>;
+				hsync-len = <2>;
+				vsync-len = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&lradc {
+	fsl,lradc-touchscreen-wires = <4>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <100>;
+	status = "okay";
+};
+
+&pinctrl {
+	usb_pins_cfa10057: usb-10057@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_D07__GPIO_0_7
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_18bit_pins_cfa10057: lcdif-18bit@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D00__LCD_D0
+			MX28_PAD_LCD_D01__LCD_D1
+			MX28_PAD_LCD_D02__LCD_D2
+			MX28_PAD_LCD_D03__LCD_D3
+			MX28_PAD_LCD_D04__LCD_D4
+			MX28_PAD_LCD_D05__LCD_D5
+			MX28_PAD_LCD_D06__LCD_D6
+			MX28_PAD_LCD_D07__LCD_D7
+			MX28_PAD_LCD_D08__LCD_D8
+			MX28_PAD_LCD_D09__LCD_D9
+			MX28_PAD_LCD_D10__LCD_D10
+			MX28_PAD_LCD_D11__LCD_D11
+			MX28_PAD_LCD_D12__LCD_D12
+			MX28_PAD_LCD_D13__LCD_D13
+			MX28_PAD_LCD_D14__LCD_D14
+			MX28_PAD_LCD_D15__LCD_D15
+			MX28_PAD_LCD_D16__LCD_D16
+			MX28_PAD_LCD_D17__LCD_D17
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_cfa10057: lcdif-evk@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+			MX28_PAD_LCD_RS__LCD_DOTCLK
+			MX28_PAD_LCD_CS__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm4_pins_a>;
+	status = "okay";
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	pinctrl-0 = <&usb1_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10058.dts b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10058.dts
new file mode 100644
index 000000000000..b414e67ef379
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10058.dts
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Crystalfontz America, Inc.
+ * Copyright 2013 Free Electrons
+ */
+
+/*
+ * The CFA-10058 is an expansion board for the CFA-10036 module, thus we
+ * need to include the CFA-10036 DTS.
+ */
+#include "imx28-cfa10036.dts"
+
+/ {
+	model = "Crystalfontz CFA-10058 Board";
+	compatible = "crystalfontz,cfa10058", "crystalfontz,cfa10036", "fsl,imx28";
+
+	reg_usb1_vbus: regulator-0 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_pins_cfa10058>;
+		regulator-name = "usb1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio0 7 1>;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 3 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_24bit_pins_a
+			 &lcdif_pins_cfa10058>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <30000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <40>;
+				hfront-porch = <40>;
+				vback-porch = <13>;
+				vfront-porch = <29>;
+				hsync-len = <8>;
+				vsync-len = <8>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&lradc {
+	fsl,lradc-touchscreen-wires = <4>;
+	status = "okay";
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <100>;
+	status = "okay";
+};
+
+&pinctrl {
+	usb_pins_cfa10058: usb-10058@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_D07__GPIO_0_7
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_cfa10058: lcdif-10058@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+			MX28_PAD_LCD_RS__LCD_DOTCLK
+			MX28_PAD_LCD_CS__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm3_pins_b>;
+	status = "okay";
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	pinctrl-0 = <&usb1_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2-485.dts b/arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2-485.dts
new file mode 100644
index 000000000000..b73020ff1053
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2-485.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
+ * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de>
+ */
+
+/dts-v1/;
+#include "imx28-duckbill-2.dts"
+
+/ {
+	model = "I2SE Duckbill 2 485";
+	compatible = "i2se,duckbill-2-485", "i2se,duckbill-2", "fsl,imx28";
+
+	leds {
+		rs485-red {
+			label = "duckbill:red:rs485";
+			gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+		};
+
+		rs485-green {
+			label = "duckbill:green:rs485";
+			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c0 {
+	status = "disabled";
+};
+
+&led_pins {
+	fsl,pinmux-ids = <
+		MX28_PAD_SAIF0_MCLK__GPIO_3_20
+		MX28_PAD_SAIF0_LRCLK__GPIO_3_21
+		MX28_PAD_I2C0_SCL__GPIO_3_24
+		MX28_PAD_I2C0_SDA__GPIO_3_25
+	>;
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2-enocean.dts b/arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2-enocean.dts
new file mode 100644
index 000000000000..473d99b9b42f
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2-enocean.dts
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
+ * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de>
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "imx28-duckbill-2.dts"
+
+/ {
+	model = "I2SE Duckbill 2 EnOcean";
+	compatible = "i2se,duckbill-2-enocean", "i2se,duckbill-2", "fsl,imx28";
+
+	leds {
+		enocean-blue {
+			label = "duckbill:blue:enocean";
+			gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+		};
+
+		enocean-red {
+			label = "duckbill:red:enocean";
+			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+		};
+
+		enocean-green {
+			label = "duckbill:green:enocean";
+			gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&enocean_button>;
+
+		key-enocean {
+			label = "EnOcean";
+			linux,code = <KEY_NEW>;
+			gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&i2c0 {
+	status = "disabled";
+};
+
+&led_pins {
+	fsl,pinmux-ids = <
+		MX28_PAD_SAIF0_MCLK__GPIO_3_20
+		MX28_PAD_SAIF0_LRCLK__GPIO_3_21
+		MX28_PAD_AUART0_CTS__GPIO_3_2
+		MX28_PAD_I2C0_SCL__GPIO_3_24
+		MX28_PAD_I2C0_SDA__GPIO_3_25
+	>;
+};
+
+&pinctrl {
+	enocean_button: enocean-button@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_AUART0_RTS__GPIO_3_3
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2-spi.dts b/arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2-spi.dts
new file mode 100644
index 000000000000..859d97a5a775
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2-spi.dts
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
+ * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de>
+ */
+
+/dts-v1/;
+#include "imx28-duckbill-2.dts"
+
+/ {
+	model = "I2SE Duckbill 2 SPI";
+	compatible = "i2se,duckbill-2-spi", "i2se,duckbill-2", "fsl,imx28";
+
+	aliases {
+		ethernet1 = &qca7000;
+	};
+};
+
+&auart0 {
+	status = "disabled";
+};
+
+&i2c0 {
+	status = "disabled";
+};
+
+&pinctrl {
+	qca7000_pins: qca7000@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_AUART0_RTS__GPIO_3_3    /* Interrupt */
+			MX28_PAD_LCD_D13__GPIO_1_13      /* QCA7K reset */
+			MX28_PAD_LCD_D14__GPIO_1_14      /* GPIO 0 */
+			MX28_PAD_LCD_D15__GPIO_1_15      /* GPIO 1 */
+			MX28_PAD_LCD_D18__GPIO_1_18      /* GPIO 2 */
+			MX28_PAD_LCD_D21__GPIO_1_21      /* GPIO 3 */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&ssp2 {
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	/delete-property/ bus-width;
+	/delete-property/ vmmc-supply;
+	status = "okay";
+
+	qca7000: ethernet@0 {
+		reg = <0>;
+		compatible = "qca,qca7000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&qca7000_pins>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+		spi-cpha;
+		spi-cpol;
+		spi-max-frequency = <8000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2.dts b/arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2.dts
new file mode 100644
index 000000000000..4e28212e9626
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-duckbill-2.dts
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
+ * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de>
+ */
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx28.dtsi"
+
+/ {
+	model = "I2SE Duckbill 2";
+	compatible = "i2se,duckbill-2", "fsl,imx28";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x08000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		status-red {
+			label = "duckbill:red:status";
+			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		status-green {
+			label = "duckbill:green:status";
+			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_2pins_a>;
+	status = "okay";
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&lradc {
+	status = "okay";
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
+	phy-supply = <&reg_3p3v>;
+	phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <25>;
+	phy-handle = <&ethphy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_phy_int_pin>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+			max-speed = <100>;
+		};
+	};
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D17__GPIO_1_17    /* Revision detection */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	mac0_phy_reset_pin: mac0-phy-reset@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_ALE__GPIO_0_26    /* PHY Reset */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	mac0_phy_int_pin: mac0-phy-int@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_D07__GPIO_0_7    /* PHY Interrupt */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	led_pins: leds@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SAIF0_MCLK__GPIO_3_20
+			MX28_PAD_SAIF0_LRCLK__GPIO_3_21
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_8bit_pins_a
+		&mmc0_cd_cfg &mmc0_sck_cfg>;
+	bus-width = <8>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+	non-removable;
+};
+
+&ssp2 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_4bit_pins_b
+		&mmc2_cd_cfg &mmc2_sck_cfg_b>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "peripheral";
+};
+
+&usbphy0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-duckbill.dts b/arch/arm/boot/dts/nxp/mxs/imx28-duckbill.dts
new file mode 100644
index 000000000000..13ffd533fdea
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-duckbill.dts
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2013-2014,2016 Michael Heimpold <mhei@heimpold.de>
+ * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "imx28.dtsi"
+
+/ {
+	model = "I2SE Duckbill";
+	compatible = "i2se,duckbill", "fsl,imx28";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x08000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		status-red {
+			label = "duckbill:red:status";
+			gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		status-green {
+			label = "duckbill:green:status";
+			gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_2pins_a>;
+	status = "okay";
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
+
+&lradc {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
+	phy-supply = <&reg_3p3v>;
+	phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <25>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D17__GPIO_1_17    /* Revision detection */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	mac0_phy_reset_pin: mac0-phy-reset@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP0_DATA7__GPIO_2_7    /* PHY Reset */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	led_pins: leds@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_AUART1_RX__GPIO_3_4
+			MX28_PAD_AUART1_TX__GPIO_3_5
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a
+		&mmc0_cd_cfg &mmc0_sck_cfg>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&ssp2 {
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	status = "okay";
+};
+
+&usb0 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts b/arch/arm/boot/dts/nxp/mxs/imx28-eukrea-mbmx283lc.dts
index 29f8a3a245d4..7ae2d4ca8ef0 100644
--- a/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-eukrea-mbmx283lc.dts
@@ -47,7 +47,7 @@
 	status = "okay";
 };
 
-&pinctrl{
+&pinctrl {
 	pinctrl-names = "default";
 	pinctrl-0 = <&hog_pins_cpuimx283>;
 
diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts b/arch/arm/boot/dts/nxp/mxs/imx28-eukrea-mbmx287lc.dts
index cd875ace168d..cd875ace168d 100644
--- a/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-eukrea-mbmx287lc.dts
diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi b/arch/arm/boot/dts/nxp/mxs/imx28-eukrea-mbmx28lc.dtsi
index 3280fddaaf0d..652fc9e57a55 100644
--- a/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-eukrea-mbmx28lc.dtsi
@@ -14,17 +14,17 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm 4 1000000>;
+		pwms = <&pwm 4 1000000 0>;
 		brightness-levels = <0 25 50 75 100 125 150 175 200 225 255>;
 		default-brightness-level = <10>;
 	};
 
-	button-sw3 {
+	gpio-keys-0 {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&gpio_button_sw3_pins_mbmx28lc>;
 
-		sw3 {
+		switch-sw3 {
 			label = "SW3";
 			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_MISC>;
@@ -32,12 +32,12 @@
 		};
 	};
 
-	button-sw4 {
+	gpio-keys-1 {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&gpio_button_sw4_pins_mbmx28lc>;
 
-		sw4 {
+		switch-sw4 {
 			label = "SW4";
 			gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_MISC>;
@@ -69,55 +69,45 @@
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
+	reg_3p3v: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 
-		reg_lcd_3v3: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&reg_lcd_3v3_pins_mbmx28lc>;
-			regulator-name = "lcd-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	reg_lcd_3v3: regulator-1 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&reg_lcd_3v3_pins_mbmx28lc>;
+		regulator-name = "lcd-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		reg_usb0_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&reg_usb0_vbus_pins_mbmx28lc>;
-			regulator-name = "usb0_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	reg_usb0_vbus: regulator-2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&reg_usb0_vbus_pins_mbmx28lc>;
+		regulator-name = "usb0_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		reg_usb1_vbus: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&reg_usb1_vbus_pins_mbmx28lc>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 19 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	reg_usb1_vbus: regulator-3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&reg_usb1_vbus_pins_mbmx28lc>;
+		regulator-name = "usb1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 	};
 
 	sound {
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-evk.dts b/arch/arm/boot/dts/nxp/mxs/imx28-evk.dts
new file mode 100644
index 000000000000..330d3aff6b6c
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-evk.dts
@@ -0,0 +1,352 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+#include "imx28.dtsi"
+
+/ {
+	model = "Freescale i.MX28 Evaluation Kit";
+	compatible = "fsl,imx28-evk", "fsl,imx28";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x08000000>;
+	};
+
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_vddio_sd0: regulator-vddio-sd0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio-sd0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 28 0>;
+	};
+
+	reg_fec_3v3: regulator-fec-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fec-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 15 0>;
+	};
+
+	reg_usb0_vbus: regulator-usb0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb0_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 9 0>;
+		enable-active-high;
+	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 8 0>;
+		enable-active-high;
+	};
+
+	reg_lcd_3v3: regulator-lcd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 30 0>;
+		enable-active-high;
+	};
+
+	reg_can_3v3: regulator-can-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "can-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 13 0>;
+		enable-active-high;
+	};
+
+	reg_lcd_5v: regulator-lcd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	panel {
+		compatible = "sii,43wvf1g";
+		backlight = <&backlight_display>;
+		dvdd-supply = <&reg_lcd_3v3>;
+		avdd-supply = <&reg_lcd_5v>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx28-evk-sgtl5000",
+			     "fsl,mxs-audio-sgtl5000";
+		model = "imx28-evk-sgtl5000";
+		saif-controllers = <&saif0 &saif1>;
+		audio-codec = <&sgtl5000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_gpio3_5>;
+
+		user {
+			label = "Heartbeat";
+			gpios = <&gpio3 5 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	backlight_display: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 2 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+};
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_pins_a>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&auart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart3_pins_a>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can0_pins_a>;
+	xceiver-supply = <&reg_can_3v3>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can1_pins_a>;
+	xceiver-supply = <&reg_can_3v3>;
+	status = "okay";
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg
+		     &gpmi_pins_evk>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_24bit_pins_a
+		     &lcdif_pins_evk>;
+	status = "okay";
+
+	port {
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&lradc {
+	fsl,lradc-touchscreen-wires = <4>;
+	fsl,ave-ctrl = <4>;
+	fsl,ave-delay = <2>;
+	fsl,settling = <10>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+		clocks = <&saif0>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c32";
+		pagesize = <32>;
+		reg = <0x51>;
+	};
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	phy-supply = <&reg_fec_3v3>;
+	phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <100>;
+	status = "okay";
+};
+
+&mac1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac1_pins_a>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP1_CMD__GPIO_2_13
+			MX28_PAD_SSP1_DATA3__GPIO_2_15
+			MX28_PAD_ENET0_RX_CLK__GPIO_4_13
+			MX28_PAD_SSP1_SCK__GPIO_2_12
+			MX28_PAD_PWM3__GPIO_3_28
+			MX28_PAD_LCD_RESET__GPIO_3_30
+			MX28_PAD_AUART2_RX__GPIO_3_8
+			MX28_PAD_AUART2_TX__GPIO_3_9
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	led_pin_gpio3_5: led_gpio3_5@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_AUART1_TX__GPIO_3_5
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	gpmi_pins_evk: gpmi-nand-evk@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_CE1N__GPMI_CE1N
+			MX28_PAD_GPMI_RDY1__GPMI_READY1
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_evk: lcdif-evk@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+			MX28_PAD_LCD_RS__LCD_DOTCLK
+			MX28_PAD_LCD_CS__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm2_pins_a>;
+	status = "okay";
+};
+
+&saif0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif0_pins_a>;
+	status = "okay";
+};
+
+&saif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif1_pins_a>;
+	fsl,saif-master = <&saif0>;
+	status = "okay";
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_8bit_pins_a
+		&mmc0_cd_cfg &mmc0_sck_cfg>;
+	bus-width = <8>;
+	wp-gpios = <&gpio2 12 0>;
+	vmmc-supply = <&reg_vddio_sd0>;
+	status = "okay";
+};
+
+&ssp1 {
+	compatible = "fsl,imx28-mmc";
+	bus-width = <8>;
+	wp-gpios = <&gpio0 28 0>;
+};
+
+&ssp2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	status = "okay";
+
+	flash: flash@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "sst,sst25vf016b", "jedec,spi-nor";
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_pins_a>;
+	vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-lwe.dtsi b/arch/arm/boot/dts/nxp/mxs/imx28-lwe.dtsi
index bb971e660db8..410dfe17f8ca 100644
--- a/arch/arm/boot/dts/imx28-lwe.dtsi
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-lwe.dtsi
@@ -18,6 +18,7 @@
 
 	memory@40000000 {
 		reg = <0x40000000 0x08000000>;
+		device_type = "memory";
 	};
 
 	reg_3v3: regulator-reg-3v3 {
@@ -54,23 +55,6 @@
 	status = "okay";
 };
 
-&saif0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&saif0_pins_a>;
-	#sound-dai-cells = <0>;
-	assigned-clocks = <&clks 53>;
-	assigned-clock-rates = <12000000>;
-	status = "okay";
-};
-
-&saif1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&saif1_pins_a>;
-	fsl,saif-master = <&saif0>;
-	#sound-dai-cells = <0>;
-	status = "okay";
-};
-
 &spi3_pins_a {
 	fsl,pinmux-ids = <
 		MX28_PAD_AUART2_RX__SSP3_D4
@@ -108,7 +92,7 @@
 
 	flash@0 {
 		compatible = "jedec,spi-nor";
-		spi-max-frequency = <40000000>;
+		spi-max-frequency = <20000000>;
 		reg = <0>;
 
 		partitions {
@@ -132,14 +116,21 @@
 				reg = <0x90000 0x10000>;
 			};
 
-			partition@100000 {
-				label = "kernel";
-				reg = <0x100000 0x400000>;
+			partition@a0000 {
+				label = "rescue";
+				reg = <0xa0000 0xf40000>;
+			};
+
+			partition@fe0000 {
+				/* 1st sector for SPL boot img source data */
+				label = "spl-boot-data1";
+				reg = <0xfe0000 0x10000>;
 			};
 
-			partition@500000 {
-				label = "swupdate";
-				reg = <0x500000 0x800000>;
+			partition@ff0000 {
+				/* 2nd sector for SPL boot img source data */
+				label = "spl-boot-data2";
+				reg = <0xff0000 0x10000>;
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-m28.dtsi b/arch/arm/boot/dts/nxp/mxs/imx28-m28.dtsi
new file mode 100644
index 000000000000..66facef10ba9
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-m28.dtsi
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2014 Marek Vasut <marex@denx.de>
+ */
+
+#include "imx28.dtsi"
+
+/ {
+	model = "Aries/DENX M28";
+	compatible = "aries,m28", "denx,m28", "fsl,imx28";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x08000000>;
+	};
+
+	reg_3p3v: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&gpmi {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	rtc: rtc@68 {
+		compatible = "st,m41t62";
+		reg = <0x68>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-m28cu3.dts b/arch/arm/boot/dts/nxp/mxs/imx28-m28cu3.dts
new file mode 100644
index 000000000000..34b4d3246db1
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-m28cu3.dts
@@ -0,0 +1,248 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2013 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+#include "imx28.dtsi"
+
+/ {
+	model = "MSR M28CU3";
+	compatible = "msr,m28cu3", "fsl,imx28";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x08000000>;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 3 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_gpio>;
+
+		user1 {
+			label = "sd0-led";
+			gpios = <&gpio2 26 0>;
+			linux,default-trigger = "mmc0";
+		};
+
+		user2 {
+			label = "sd1-led";
+			gpios = <&gpio2 24 0>;
+			linux,default-trigger = "mmc2";
+		};
+	};
+
+	reg_3p3v: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_vddio_sd0: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio-sd0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 29 0>;
+	};
+
+	reg_vddio_sd1: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio-sd1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 0>;
+	};
+
+	reg_usb1_vbus: regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 8 0>;
+		enable-active-high;
+	};
+};
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_2pins_a>;
+	status = "okay";
+};
+
+&auart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart3_2pins_b>;
+	status = "okay";
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_b>;
+	status = "okay";
+};
+
+&gpmi {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+	status = "okay";
+
+	partition@0 {
+		label = "gpmi-nfc-0-boot";
+		reg = <0x00000000 0x01400000>;
+		read-only;
+	};
+
+	partition@1 {
+		label = "gpmi-nfc-general-use";
+		reg = <0x01400000 0x0ec00000>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_24bit_pins_a
+		     &lcdif_pins_m28>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <6410256>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <38>;
+				hfront-porch = <20>;
+				vback-porch = <15>;
+				vfront-porch = <5>;
+				hsync-len = <30>;
+				vsync-len = <3>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <100>;
+	status = "okay";
+};
+
+&mac1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac1_pins_a>;
+	status = "okay";
+};
+
+&ocotp {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP2_SS0__GPIO_2_19
+			MX28_PAD_PWM4__GPIO_3_29
+			MX28_PAD_AUART2_RX__GPIO_3_8
+			MX28_PAD_ENET0_RX_CLK__GPIO_4_13
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_m28: lcdif-m28@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_VSYNC__LCD_VSYNC
+			MX28_PAD_LCD_HSYNC__LCD_HSYNC
+			MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
+			MX28_PAD_LCD_RESET__LCD_RESET
+			MX28_PAD_LCD_CS__LCD_ENABLE
+			MX28_PAD_AUART1_TX__GPIO_3_5
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	led_pins_gpio: leds-m28@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP3_MISO__GPIO_2_26
+			MX28_PAD_SSP3_SCK__GPIO_2_24
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm3_pins_a>;
+	status = "okay";
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a
+		     &mmc0_cd_cfg
+		     &mmc0_sck_cfg>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_vddio_sd0>;
+	status = "okay";
+};
+
+&ssp2 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_4bit_pins_a
+		     &mmc2_cd_cfg
+		     &mmc2_sck_cfg_a>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_vddio_sd1>;
+	status = "okay";
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins_a>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-m28evk.dts b/arch/arm/boot/dts/nxp/mxs/imx28-m28evk.dts
new file mode 100644
index 000000000000..13070ca08cff
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-m28evk.dts
@@ -0,0 +1,258 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+
+ * Copyright (C) 2012 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+#include "imx28-m28.dtsi"
+
+/ {
+	model = "Aries/DENX M28EVK";
+	compatible = "aries,m28evk", "denx,m28evk", "fsl,imx28";
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 4 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	reg_vddio_sd0: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio-sd0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 28 0>;
+	};
+
+	reg_usb0_vbus: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb0_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 12 0>;
+	};
+
+	reg_usb1_vbus: regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 13 0>;
+	};
+
+	sound {
+		compatible = "denx,m28evk-sgtl5000",
+			     "fsl,mxs-audio-sgtl5000";
+		model = "m28evk-sgtl5000";
+		saif-controllers = <&saif0 &saif1>;
+		audio-codec = <&sgtl5000>;
+	};
+};
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_pins_a>;
+	status = "okay";
+};
+
+&auart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart1_pins_a>;
+	status = "okay";
+};
+
+&auart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart2_2pins_b>;
+	status = "okay";
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
+
+&i2c0 {
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+		clocks = <&saif0>;
+	};
+
+	eeprom: eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_24bit_pins_a
+		     &lcdif_pins_m28>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <16>;
+		bus-width = <18>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <33260000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <0>;
+				hfront-porch = <256>;
+				vback-porch = <0>;
+				vfront-porch = <45>;
+				hsync-len = <1>;
+				vsync-len = <1>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&lradc {
+	status = "okay";
+	fsl,lradc-touchscreen-wires = <4>;
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can0_pins_a>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can1_pins_a>;
+	status = "okay";
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	clocks = <&clks 57>, <&clks 57>;
+	clock-names = "ipg", "ahb";
+	status = "okay";
+};
+
+&mac1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac1_pins_a>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_PWM3__GPIO_3_28
+			MX28_PAD_AUART2_CTS__GPIO_3_10
+			MX28_PAD_AUART2_RTS__GPIO_3_11
+			MX28_PAD_AUART3_RX__GPIO_3_12
+			MX28_PAD_AUART3_TX__GPIO_3_13
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_m28: lcdif-m28@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
+			MX28_PAD_LCD_ENABLE__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm4_pins_a>;
+	status = "okay";
+};
+
+&saif0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif0_pins_a>;
+	status = "okay";
+};
+
+&saif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif1_pins_a>;
+	fsl,saif-master = <&saif0>;
+	status = "okay";
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_8bit_pins_a
+		     &mmc0_cd_cfg
+		     &mmc0_sck_cfg>;
+	bus-width = <8>;
+	wp-gpios = <&gpio3 10 0>;
+	vmmc-supply = <&reg_vddio_sd0>;
+	status = "okay";
+};
+
+&ssp2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p80", "jedec,spi-nor";
+		spi-max-frequency = <40000000>;
+		reg = <0>;
+	};
+};
+
+&usb0 {
+	vbus-supply = <&reg_usb0_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins_a>;
+	status = "okay";
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins_a>;
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-pinfunc.h b/arch/arm/boot/dts/nxp/mxs/imx28-pinfunc.h
index e11f69ba0fe4..d427e6c2fa78 100644
--- a/arch/arm/boot/dts/imx28-pinfunc.h
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-pinfunc.h
@@ -1,14 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Header providing constants for i.MX28 pinctrl bindings.
  *
  * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 #ifndef __DT_BINDINGS_MX28_PINCTRL_H__
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-sps1.dts b/arch/arm/boot/dts/nxp/mxs/imx28-sps1.dts
new file mode 100644
index 000000000000..ca62e7933116
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-sps1.dts
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2012 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+#include "imx28.dtsi"
+
+/ {
+	model = "SchulerControl GmbH, SC SPS 1";
+	compatible = "schulercontrol,imx28-sps1", "fsl,imx28";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x08000000>;
+	};
+
+	reg_usb0_vbus: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb0_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 9 0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		status = "okay";
+
+		led-1 {
+			label = "sps1-1:yellow:user";
+			gpios = <&gpio0 6 0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-2 {
+			label = "sps1-2:red:user";
+			gpios = <&gpio0 3 0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-3 {
+			label = "sps1-3:red:user";
+			gpios = <&gpio0 0 0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+	};
+};
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_pins_a>;
+	status = "okay";
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	rtc: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	eeprom: eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+		pagesize = <32>;
+	};
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	status = "okay";
+};
+
+&mac1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac1_pins_a>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	hog_pins_a: hog-gpios@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_D00__GPIO_0_0
+			MX28_PAD_GPMI_D03__GPIO_0_3
+			MX28_PAD_GPMI_D06__GPIO_0_6
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ssp2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "everspin,mr25h256", "mr25h256";
+		spi-max-frequency = <40000000>;
+		reg = <0>;
+	};
+};
+
+&usb0 {
+	vbus-supply = <&reg_usb0_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins_b>;
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-ts4600.dts b/arch/arm/boot/dts/nxp/mxs/imx28-ts4600.dts
new file mode 100644
index 000000000000..ae6ed5c41be3
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-ts4600.dts
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2016 Savoir-Faire Linux
+ * Author: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
+ */
+
+/dts-v1/;
+#include "imx28.dtsi"
+#include "dt-bindings/gpio/gpio.h"
+
+/ {
+
+	model = "Technologic Systems i.MX28 TS-4600";
+	compatible = "technologic,imx28-ts4600", "fsl,imx28";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x10000000>;   /* 256MB */
+	};
+
+	reg_vddio_sd0: regulator-vddio-sd0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio-sd0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		gpio = <&gpio3 28 GPIO_ACTIVE_LOW>;
+	};
+
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
+
+&pinctrl {
+	en_sd_pwr: en-sd-pwr@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_PWM3__GPIO_3_28
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm2_pins_a>;
+	status = "okay";
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a
+		     &mmc0_sck_cfg
+		     &en_sd_pwr>;
+	broken-cd;
+	bus-width = <4>;
+	vmmc-supply = <&reg_vddio_sd0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts
index 164254c28f8e..9290635352f1 100644
--- a/arch/arm/boot/dts/imx28-tx28.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts
@@ -1,43 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
 /*
  * Copyright 2012 Shawn Guo <shawn.guo@linaro.org>
  * Copyright 2013-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -167,7 +131,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm 0 500000>;
+		pwms = <&pwm 0 500000 0>;
 		/*
 		 * a silly way to create a 1:1 relationship between the
 		 * PWM value and the actual duty cycle
@@ -221,16 +185,16 @@
 		linux,no-autorepeat;
 	};
 
-	spi_gpio: spi-gpio {
+	spi_gpio: spi {
 		compatible = "spi-gpio";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&tx28_spi_gpio_pins>;
 
-		gpio-sck = <&gpio2 24 GPIO_ACTIVE_HIGH>;
-		gpio-mosi = <&gpio2 25 GPIO_ACTIVE_HIGH>;
-		gpio-miso = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+		sck-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <3>;
 		cs-gpios = <
 			&gpio2 27 GPIO_ACTIVE_LOW
@@ -239,24 +203,6 @@
 		>;
 		/* enable this and disable ssp3 below, if you need full duplex SPI transfer */
 		status = "disabled";
-
-		spi@0 {
-			compatible = "spidev";
-			reg = <0>;
-			spi-max-frequency = <57600000>;
-		};
-
-		spi@1 {
-			compatible = "spidev";
-			reg = <1>;
-			spi-max-frequency = <57600000>;
-		};
-
-		spi@2 {
-			compatible = "spidev";
-			reg = <2>;
-			spi-max-frequency = <57600000>;
-		};
 	};
 };
 
@@ -314,6 +260,7 @@
 	sgtl5000: sgtl5000@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_3p3v>;
 		clocks = <&mclk>;
@@ -356,7 +303,7 @@
 	};
 
 	ds1339: rtc@68 {
-		compatible = "mxim,ds1339";
+		compatible = "dallas,ds1339";
 		reg = <0x68>;
 		trickle-resistor-ohms = <250>;
 		trickle-diode-disable;
@@ -376,7 +323,6 @@
 		display-timings {
 			native-mode = <&timing5>;
 			timing0: timing0 {
-				panel-name = "VGA";
 				clock-frequency = <25175000>;
 				hactive = <640>;
 				vactive = <480>;
@@ -393,7 +339,6 @@
 			};
 
 			timing1: timing1 {
-				panel-name = "ETV570";
 				clock-frequency = <25175000>;
 				hactive = <640>;
 				vactive = <480>;
@@ -410,7 +355,6 @@
 			};
 
 			timing2: timing2 {
-				panel-name = "ET0350";
 				clock-frequency = <6500000>;
 				hactive = <320>;
 				vactive = <240>;
@@ -427,7 +371,6 @@
 			};
 
 			timing3: timing3 {
-				panel-name = "ET0430";
 				clock-frequency = <9000000>;
 				hactive = <480>;
 				vactive = <272>;
@@ -444,7 +387,6 @@
 			};
 
 			timing4: timing4 {
-				panel-name = "ET0500", "ET0700";
 				clock-frequency = <33260000>;
 				hactive = <800>;
 				vactive = <480>;
@@ -461,7 +403,6 @@
 			};
 
 			timing5: timing5 {
-				panel-name = "ETQ570";
 				clock-frequency = <6400000>;
 				hactive = <320>;
 				vactive = <240>;
@@ -674,13 +615,13 @@
 &saif0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&saif0_pins_b>;
-	fsl,saif-master;
 	status = "okay";
 };
 
 &saif1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&saif1_pins_a>;
+	fsl,saif-master = <&saif0>;
 	status = "okay";
 };
 
@@ -700,30 +641,13 @@
 	pinctrl-0 = <&spi3_pins_a>;
 	clock-frequency = <57600000>;
 	status = "okay";
-
-	spi@0 {
-		compatible = "spidev";
-		reg = <0>;
-		spi-max-frequency = <57600000>;
-	};
-
-	spi@1 {
-		compatible = "spidev";
-		reg = <1>;
-		spi-max-frequency = <57600000>;
-	};
-
-	spi@2 {
-		compatible = "spidev";
-		reg = <2>;
-		spi-max-frequency = <57600000>;
-	};
 };
 
 &usb0 {
 	vbus-supply = <&reg_usb0_vbus>;
 	disable-over-current;
 	dr_mode = "peripheral";
+	phy_type = "utmi";
 	status = "okay";
 };
 
@@ -731,19 +655,18 @@
 	vbus-supply = <&reg_usb1_vbus>;
 	disable-over-current;
 	dr_mode = "host";
+	phy_type = "utmi";
 	status = "okay";
 };
 
 &usbphy0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&tx28_usbphy0_pins>;
-	phy_type = "utmi";
 	status = "okay";
 };
 
 &usbphy1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&tx28_usbphy1_pins>;
-	phy_type = "utmi";
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx28-xea.dts b/arch/arm/boot/dts/nxp/mxs/imx28-xea.dts
index a400c108f66a..6c5e6856648a 100644
--- a/arch/arm/boot/dts/imx28-xea.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-xea.dts
@@ -8,6 +8,7 @@
 #include "imx28-lwe.dtsi"
 
 / {
+	model = "Liebherr XEA board";
 	compatible = "lwn,imx28-xea", "fsl,imx28";
 };
 
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
index 84d0176d5193..ece46d0e7c7f 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
@@ -56,7 +56,7 @@
 		reg = <0x80000000 0x80000>;
 		ranges;
 
-		apbh@80000000 {
+		apbh-bus@80000000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -78,17 +78,13 @@
 				status = "disabled";
 			};
 
-			dma_apbh: dma-apbh@80004000 {
+			dma_apbh: dma-controller@80004000 {
 				compatible = "fsl,imx28-dma-apbh";
 				reg = <0x80004000 0x2000>;
-				interrupts = <82 83 84 85
-					      88 88 88 88
-					      88 88 88 88
-					      87 86 0 0>;
-				interrupt-names = "ssp0", "ssp1", "ssp2", "ssp3",
-						  "gpmi0", "gmpi1", "gpmi2", "gmpi3",
-						  "gpmi4", "gmpi5", "gpmi6", "gmpi7",
-						  "hsadc", "lcdif", "empty", "empty";
+				interrupts = <82>, <83>, <84>, <85>,
+					     <88>, <88>, <88>, <88>,
+					     <88>, <88>, <88>, <88>,
+					     <87>, <86>, <0>, <0>;
 				#dma-cells = <1>;
 				dma-channels = <16>;
 				clocks = <&clks 25>;
@@ -110,6 +106,8 @@
 				interrupt-names = "bch";
 				clocks = <&clks 50>;
 				clock-names = "gpmi_io";
+				assigned-clocks = <&clks 13>;
+				assigned-clock-parents = <&clks 10>;
 				dmas = <&dma_apbh 4>;
 				dma-names = "rx-tx";
 				status = "disabled";
@@ -166,7 +164,7 @@
 				reg = <0x80018000 0x2000>;
 
 				gpio0: gpio@0 {
-					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					compatible = "fsl,imx28-gpio";
 					reg = <0>;
 					interrupts = <127>;
 					gpio-controller;
@@ -176,7 +174,7 @@
 				};
 
 				gpio1: gpio@1 {
-					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					compatible = "fsl,imx28-gpio";
 					reg = <1>;
 					interrupts = <126>;
 					gpio-controller;
@@ -186,7 +184,7 @@
 				};
 
 				gpio2: gpio@2 {
-					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					compatible = "fsl,imx28-gpio";
 					reg = <2>;
 					interrupts = <125>;
 					gpio-controller;
@@ -196,7 +194,7 @@
 				};
 
 				gpio3: gpio@3 {
-					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					compatible = "fsl,imx28-gpio";
 					reg = <3>;
 					interrupts = <124>;
 					gpio-controller;
@@ -206,7 +204,7 @@
 				};
 
 				gpio4: gpio@4 {
-					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					compatible = "fsl,imx28-gpio";
 					reg = <4>;
 					interrupts = <123>;
 					gpio-controller;
@@ -757,6 +755,16 @@
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
+				pwm7_pins_a: pwm7@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SAIF1_SDATA0__PWM_7
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
 				lcdif_24bit_pins_a: lcdif-24bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
@@ -992,26 +1000,22 @@
 				status = "disabled";
 			};
 
-			dma_apbx: dma-apbx@80024000 {
+			dma_apbx: dma-controller@80024000 {
 				compatible = "fsl,imx28-dma-apbx";
 				reg = <0x80024000 0x2000>;
-				interrupts = <78 79 66 0
-					      80 81 68 69
-					      70 71 72 73
-					      74 75 76 77>;
-				interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty",
-						  "saif0", "saif1", "i2c0", "i2c1",
-						  "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
-						  "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
+				interrupts = <78>, <79>, <66>, <0>,
+					     <80>, <81>, <68>, <69>,
+					     <70>, <71>, <72>, <73>,
+					     <74>, <75>, <76>, <77>;
 				#dma-cells = <1>;
 				dma-channels = <16>;
 				clocks = <&clks 26>;
 			};
 
 			dcp: crypto@80028000 {
-				compatible = "fsl,imx28-dcp", "fsl,imx23-dcp";
+				compatible = "fsl,imx28-dcp";
 				reg = <0x80028000 0x2000>;
-				interrupts = <52 53 54>;
+				interrupts = <52>, <53>, <54>;
 				status = "okay";
 			};
 
@@ -1098,7 +1102,7 @@
 			};
 		};
 
-		apbx@80040000 {
+		apbx-bus@80040000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -1106,7 +1110,7 @@
 			ranges;
 
 			clks: clkctrl@80040000 {
-				compatible = "fsl,imx28-clkctrl", "fsl,clkctrl";
+				compatible = "fsl,imx28-clkctrl";
 				reg = <0x80040000 0x2000>;
 				#clock-cells = <1>;
 			};
@@ -1142,8 +1146,8 @@
 			lradc: lradc@80050000 {
 				compatible = "fsl,imx28-lradc";
 				reg = <0x80050000 0x2000>;
-				interrupts = <10 14 15 16 17 18 19
-						20 21 22 23 24 25>;
+				interrupts = <10>, <14>, <15>, <16>, <17>, <18>, <19>,
+					     <20>, <21>, <22>, <23>, <24>, <25>;
 				status = "disabled";
 				clocks = <&clks 41>;
 				#io-channel-cells = <1>;
@@ -1191,7 +1195,7 @@
 				compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
 				reg = <0x80064000 0x2000>;
 				clocks = <&clks 44>;
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				fsl,pwm-number = <8>;
 				status = "disabled";
 			};
@@ -1199,7 +1203,7 @@
 			timer: timrot@80068000 {
 				compatible = "fsl,imx28-timrot", "fsl,timrot";
 				reg = <0x80068000 0x2000>;
-				interrupts = <48 49 50 51>;
+				interrupts = <48>, <49>, <50>, <51>;
 				clocks = <&clks 26>;
 			};
 
@@ -1258,7 +1262,7 @@
 				reg = <0x80074000 0x1000>;
 				interrupts = <47>;
 				clocks = <&clks 45>, <&clks 26>;
-				clock-names = "uart", "apb_pclk";
+				clock-names = "uartclk", "apb_pclk";
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/nxp/mxs/mxs-pinfunc.h b/arch/arm/boot/dts/nxp/mxs/mxs-pinfunc.h
new file mode 100644
index 000000000000..31297abcbc71
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/mxs/mxs-pinfunc.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Header providing constants for i.MX28 pinctrl bindings.
+ *
+ * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
+ */
+
+#ifndef __DT_BINDINGS_MXS_PINCTRL_H__
+#define __DT_BINDINGS_MXS_PINCTRL_H__
+
+/* fsl,drive-strength property */
+#define MXS_DRIVE_4mA		0
+#define MXS_DRIVE_8mA		1
+#define MXS_DRIVE_12mA		2
+#define MXS_DRIVE_16mA		3
+
+/* fsl,voltage property */
+#define MXS_VOLTAGE_LOW		0
+#define MXS_VOLTAGE_HIGH	1
+
+/* fsl,pull-up property */
+#define MXS_PULL_DISABLE	0
+#define MXS_PULL_ENABLE		1
+
+#endif /* __DT_BINDINGS_MXS_PINCTRL_H__ */
diff --git a/arch/arm/boot/dts/nxp/vf/Makefile b/arch/arm/boot/dts/nxp/vf/Makefile
new file mode 100644
index 000000000000..0a4a7f9dd43e
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/vf/Makefile
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_SOC_VF610) += \
+	vf500-colibri-eval-v3.dtb \
+	vf610-bk4.dtb \
+	vf610-colibri-eval-v3.dtb \
+	vf610m4-colibri.dtb \
+	vf610-cosmic.dtb \
+	vf610m4-cosmic.dtb \
+	vf610-twr.dtb \
+	vf610-zii-cfu1.dtb \
+	vf610-zii-dev-rev-b.dtb \
+	vf610-zii-dev-rev-c.dtb \
+	vf610-zii-scu4-aib.dtb \
+	vf610-zii-spb4.dtb \
+	vf610-zii-ssmb-dtu.dtb \
+	vf610-zii-ssmb-spu3.dtb
diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi
index c12a1b8bc086..86c360868e4b 100644
--- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi
@@ -17,6 +17,7 @@
 	panel: panel {
 		compatible = "edt,et057090dhu";
 		backlight = <&bl>;
+		power-supply = <&reg_3v3>;
 
 		port {
 			panel_in: endpoint {
@@ -55,7 +56,7 @@
 	brightness-levels = <0 4 8 16 32 64 128 255>;
 	default-brightness-level = <6>;
 	power-supply = <&reg_3v3>;
-	status  = "okay";
+	status = "okay";
 };
 
 &dcu0 {
@@ -103,7 +104,7 @@
 	status = "okay";
 
 	/* M41T0M6 real time clock on carrier board */
-	rtc: m41t0m6@68 {
+	rtc: rtc@68 {
 		compatible = "st,m41t0";
 		reg = <0x68>;
 	};
@@ -142,11 +143,9 @@
 };
 
 &iomuxc {
-	vf610-colibri {
-		pinctrl_can_int: can_int {
-			fsl,pins = <
-				VF610_PAD_PTB21__GPIO_43	0x22ed
-			>;
-		};
+	pinctrl_can_int: can_intgrp {
+		fsl,pins = <
+			VF610_PAD_PTB21__GPIO_43	0x22ed
+		>;
 	};
 };
diff --git a/arch/arm/boot/dts/nxp/vf/vf-colibri.dtsi b/arch/arm/boot/dts/nxp/vf/vf-colibri.dtsi
new file mode 100644
index 000000000000..98f9ee1b0030
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/vf/vf-colibri.dtsi
@@ -0,0 +1,348 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2014-2020 Toradex
+ *
+ */
+
+/ {
+	aliases {
+		ethernet0 = &fec1;
+		ethernet1 = &fec0;
+	};
+
+	bl: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_bl_on>;
+		pwms = <&pwm0 0 5000000 0>;
+		enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_module_3v3_avdd: regulator-module-3v3-avdd {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_AVDD_AUDIO";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&adc0 {
+	status = "okay";
+	vref-supply = <&reg_module_3v3_avdd>;
+};
+
+&adc1 {
+	status = "okay";
+	vref-supply = <&reg_module_3v3_avdd>;
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan0>;
+	status = "disabled";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "disabled";
+};
+
+&clks {
+	assigned-clocks = <&clks VF610_CLK_ENET_SEL>,
+			  <&clks VF610_CLK_ENET_TS_SEL>;
+	assigned-clock-parents = <&clks VF610_CLK_ENET_50M>,
+				 <&clks VF610_CLK_ENET_50M>;
+};
+
+&dspi1 {
+	bus-num = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dspi1>;
+};
+
+&edma0 {
+	status = "okay";
+};
+
+&edma1 {
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	cd-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+	disable-wp;
+};
+
+&fec1 {
+	phy-mode = "rmii";
+	phy-supply = <&reg_module_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c0>;
+	pinctrl-1 = <&pinctrl_i2c0_gpio>;
+	scl-gpios = <&gpio1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
+	status = "okay";
+
+	nand@0 {
+		compatible = "fsl,vf610-nfc-nandcs";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <32>;
+		nand-ecc-step-size = <2048>;
+		nand-on-flash-bbt;
+	};
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0>;
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+};
+
+&usbdev0 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbmisc0 {
+	status = "okay";
+};
+
+&usbmisc1 {
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_flexcan0: can0grp {
+		fsl,pins = <
+			VF610_PAD_PTB14__CAN0_RX	0x31F1
+			VF610_PAD_PTB15__CAN0_TX	0x31F2
+		>;
+	};
+
+	pinctrl_flexcan1: can1grp {
+		fsl,pins = <
+			VF610_PAD_PTB16__CAN1_RX	0x31F1
+			VF610_PAD_PTB17__CAN1_TX	0x31F2
+		>;
+	};
+
+	pinctrl_gpio_ext: gpio_extgrp {
+		fsl,pins = <
+			VF610_PAD_PTD10__GPIO_89	0x22ed /* EXT_IO_0 */
+			VF610_PAD_PTD9__GPIO_88		0x22ed /* EXT_IO_1 */
+			VF610_PAD_PTD26__GPIO_68	0x22ed /* EXT_IO_2 */
+		>;
+	};
+
+	pinctrl_dcu0_1: dcu01grp {
+		fsl,pins = <
+			VF610_PAD_PTE0__DCU0_HSYNC	0x1902
+			VF610_PAD_PTE1__DCU0_VSYNC	0x1902
+			VF610_PAD_PTE2__DCU0_PCLK	0x1902
+			VF610_PAD_PTE4__DCU0_DE		0x1902
+			VF610_PAD_PTE5__DCU0_R0		0x1902
+			VF610_PAD_PTE6__DCU0_R1		0x1902
+			VF610_PAD_PTE7__DCU0_R2		0x1902
+			VF610_PAD_PTE8__DCU0_R3		0x1902
+			VF610_PAD_PTE9__DCU0_R4		0x1902
+			VF610_PAD_PTE10__DCU0_R5	0x1902
+			VF610_PAD_PTE11__DCU0_R6	0x1902
+			VF610_PAD_PTE12__DCU0_R7	0x1902
+			VF610_PAD_PTE13__DCU0_G0	0x1902
+			VF610_PAD_PTE14__DCU0_G1	0x1902
+			VF610_PAD_PTE15__DCU0_G2	0x1902
+			VF610_PAD_PTE16__DCU0_G3	0x1902
+			VF610_PAD_PTE17__DCU0_G4	0x1902
+			VF610_PAD_PTE18__DCU0_G5	0x1902
+			VF610_PAD_PTE19__DCU0_G6	0x1902
+			VF610_PAD_PTE20__DCU0_G7	0x1902
+			VF610_PAD_PTE21__DCU0_B0	0x1902
+			VF610_PAD_PTE22__DCU0_B1	0x1902
+			VF610_PAD_PTE23__DCU0_B2	0x1902
+			VF610_PAD_PTE24__DCU0_B3	0x1902
+			VF610_PAD_PTE25__DCU0_B4	0x1902
+			VF610_PAD_PTE26__DCU0_B5	0x1902
+			VF610_PAD_PTE27__DCU0_B6	0x1902
+			VF610_PAD_PTE28__DCU0_B7	0x1902
+		>;
+	};
+
+	pinctrl_dspi1: dspi1grp {
+		fsl,pins = <
+			VF610_PAD_PTD5__DSPI1_CS0		0x33e2
+			VF610_PAD_PTD6__DSPI1_SIN		0x33e1
+			VF610_PAD_PTD7__DSPI1_SOUT		0x33e2
+			VF610_PAD_PTD8__DSPI1_SCK		0x33e2
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
+			VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
+			VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef
+			VF610_PAD_PTA27__ESDHC1_DAT1	0x31ef
+			VF610_PAD_PTA28__ESDHC1_DATA2	0x31ef
+			VF610_PAD_PTA29__ESDHC1_DAT3	0x31ef
+			VF610_PAD_PTB20__GPIO_42	0x219d
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			VF610_PAD_PTA6__RMII_CLKOUT		0x30d2
+			VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
+			VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
+			VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
+			VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30d1
+			VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
+			VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
+			VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
+			VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
+			VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
+		>;
+	};
+
+	pinctrl_gpio_bl_on: gpio_bl_ongrp {
+		fsl,pins = <
+			VF610_PAD_PTC0__GPIO_45		0x22ef
+		>;
+	};
+
+	pinctrl_i2c0: i2c0grp {
+		fsl,pins = <
+			VF610_PAD_PTB14__I2C0_SCL		0x37ff
+			VF610_PAD_PTB15__I2C0_SDA		0x37ff
+		>;
+	};
+
+	pinctrl_i2c0_gpio: i2c0gpiogrp {
+		fsl,pins = <
+			VF610_PAD_PTB14__GPIO_36		0x37ff
+			VF610_PAD_PTB15__GPIO_37		0x37ff
+		>;
+	};
+
+	pinctrl_nfc: nfcgrp {
+		fsl,pins = <
+			VF610_PAD_PTD23__NF_IO7		0x28df
+			VF610_PAD_PTD22__NF_IO6		0x28df
+			VF610_PAD_PTD21__NF_IO5		0x28df
+			VF610_PAD_PTD20__NF_IO4		0x28df
+			VF610_PAD_PTD19__NF_IO3		0x28df
+			VF610_PAD_PTD18__NF_IO2		0x28df
+			VF610_PAD_PTD17__NF_IO1		0x28df
+			VF610_PAD_PTD16__NF_IO0		0x28df
+			VF610_PAD_PTB24__NF_WE_B	0x28c2
+			VF610_PAD_PTB25__NF_CE0_B	0x28c2
+			VF610_PAD_PTB27__NF_RE_B	0x28c2
+			VF610_PAD_PTC26__NF_RB_B	0x283d
+			VF610_PAD_PTC27__NF_ALE		0x28c2
+			VF610_PAD_PTC28__NF_CLE		0x28c2
+		>;
+	};
+
+	pinctrl_pwm0: pwm0grp {
+		fsl,pins = <
+			VF610_PAD_PTB0__FTM0_CH0		0x1182
+			VF610_PAD_PTB1__FTM0_CH1		0x1182
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			VF610_PAD_PTB8__FTM1_CH0		0x1182
+			VF610_PAD_PTB9__FTM1_CH1		0x1182
+		>;
+	};
+
+	pinctrl_uart0: uart0grp {
+		fsl,pins = <
+			VF610_PAD_PTB10__UART0_TX		0x21a2
+			VF610_PAD_PTB11__UART0_RX		0x21a1
+			VF610_PAD_PTB12__UART0_RTS		0x21a2
+			VF610_PAD_PTB13__UART0_CTS		0x21a1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			VF610_PAD_PTB4__UART1_TX		0x21a2
+			VF610_PAD_PTB5__UART1_RX		0x21a1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			VF610_PAD_PTD0__UART2_TX		0x21a2
+			VF610_PAD_PTD1__UART2_RX		0x21a1
+			VF610_PAD_PTD2__UART2_RTS		0x21a2
+			VF610_PAD_PTD3__UART2_CTS		0x21a1
+		>;
+	};
+
+	pinctrl_usbh1_reg: gpio_usb_vbusgrp {
+		fsl,pins = <
+			VF610_PAD_PTD4__GPIO_83			0x22ed
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/vf500-colibri-eval-v3.dts b/arch/arm/boot/dts/nxp/vf/vf500-colibri-eval-v3.dts
index 088964f8dc4b..088964f8dc4b 100644
--- a/arch/arm/boot/dts/vf500-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf500-colibri-eval-v3.dts
diff --git a/arch/arm/boot/dts/nxp/vf/vf500-colibri.dtsi b/arch/arm/boot/dts/nxp/vf/vf500-colibri.dtsi
new file mode 100644
index 000000000000..ae3403c766d6
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/vf/vf500-colibri.dtsi
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2014-2020 Toradex
+ */
+
+#include "vf500.dtsi"
+#include "vf-colibri.dtsi"
+
+/ {
+	model = "Toradex Colibri VF50 COM";
+	compatible = "toradex,vf500-colibri_vf50", "fsl,vf500";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x8000000>;
+	};
+
+	touchscreen: vf50-touchscreen {
+		compatible = "toradex,vf50-touchscreen";
+		io-channels = <&adc1 0>,<&adc0 0>,
+				<&adc0 1>,<&adc1 2>;
+		xp-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		xm-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+		yp-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		ym-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "idle","default","gpios";
+		pinctrl-0 = <&pinctrl_touchctrl_idle>;
+		pinctrl-1 = <&pinctrl_touchctrl_default>;
+		pinctrl-2 = <&pinctrl_touchctrl_gpios>;
+		vf50-ts-min-pressure = <200>;
+		status = "disabled";
+	};
+};
+
+&nfc {
+	assigned-clocks = <&clks VF610_CLK_NFC>;
+	assigned-clock-rates = <33000000>;
+};
+
+&iomuxc {
+	pinctrl_touchctrl_idle: touchctrl_idlegrp {
+		fsl,pins = <
+			VF610_PAD_PTA18__GPIO_8		0x006d
+			VF610_PAD_PTA19__GPIO_9		0x006c
+			>;
+	};
+
+	pinctrl_touchctrl_default: touchctrl_defaultgrp {
+		fsl,pins = <
+			VF610_PAD_PTA18__ADC0_SE0	0x0040
+			VF610_PAD_PTA19__ADC0_SE1	0x0040
+			VF610_PAD_PTA16__ADC1_SE0	0x0040
+			VF610_PAD_PTB2__ADC1_SE2	0x0040
+			>;
+	};
+
+	pinctrl_touchctrl_gpios: touchctrl_gpiosgrp {
+		fsl,pins = <
+			VF610_PAD_PTA23__GPIO_13	0x22e9
+			VF610_PAD_PTB23__GPIO_93	0x22e9
+			VF610_PAD_PTA22__GPIO_12	0x22e9
+			VF610_PAD_PTA11__GPIO_4		0x22e9
+			>;
+	};
+};
diff --git a/arch/arm/boot/dts/vf500.dtsi b/arch/arm/boot/dts/nxp/vf/vf500.dtsi
index 0c0dd442300a..71ccdaa6f269 100644
--- a/arch/arm/boot/dts/vf500.dtsi
+++ b/arch/arm/boot/dts/nxp/vf/vf500.dtsi
@@ -43,15 +43,13 @@
 			};
 		};
 
-		bus@40080000 {
-			pmu@40089000 {
-				compatible = "arm,cortex-a5-pmu";
-				interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-affinity = <&a5_cpu>;
-				reg = <0x40089000 0x1000>;
-			};
-		};
+	};
 
+	pmu {
+		compatible = "arm,cortex-a5-pmu";
+		interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a5_cpu>;
+		interrupt-parent = <&mscm_ir>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/vf610-bk4.dts b/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts
index 830c85476b3d..e36c854dc297 100644
--- a/arch/arm/boot/dts/vf610-bk4.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts
@@ -38,7 +38,7 @@
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
 		/* LED D5 */
-		led0: heartbeat {
+		led0: led-heartbeat {
 			label = "heartbeat";
 			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
@@ -61,14 +61,14 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
-	spi-gpio {
+	spi {
 		compatible = "spi-gpio";
 		pinctrl-0 = <&pinctrl_gpio_spi>;
 		pinctrl-names = "default";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		/* PTD12 ->RPIO[91] */
-		sck-gpios  = <&gpio2 27 GPIO_ACTIVE_LOW>;
+		sck-gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
 		/* PTD10 ->RPIO[89] */
 		miso-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <0>;
@@ -79,7 +79,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			/* PTB18 -> RGPIO[40] */
-			load-gpios  = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			load-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
 			spi-max-frequency = <100000>;
 		};
 	};
@@ -119,7 +119,7 @@
 	status = "okay";
 
 	spidev0@0 {
-		compatible = "lwn,bk4";
+		compatible = "lwn,bk4-spi";
 		spi-max-frequency = <30000000>;
 		reg = <0>;
 		fsl,spi-cs-sck-delay = <200>;
@@ -136,7 +136,7 @@
 	#address-cells = <0>;
 
 	slave {
-		compatible = "lwn,bk4";
+		compatible = "lwn,bk4-spi";
 		spi-max-frequency = <30000000>;
 	};
 };
@@ -458,7 +458,7 @@
 		>;
 	};
 
-	pinctrl_gpio_spi: pinctrl-gpio-spi {
+	pinctrl_gpio_spi: pinctrl-gpio-spigrp {
 		fsl,pins = <
 			VF610_PAD_PTB18__GPIO_40        0x1183
 			VF610_PAD_PTD10__GPIO_89        0x1183
diff --git a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts b/arch/arm/boot/dts/nxp/vf/vf610-colibri-eval-v3.dts
index fb661e8a2dc6..fb661e8a2dc6 100644
--- a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610-colibri-eval-v3.dts
diff --git a/arch/arm/boot/dts/vf610-colibri.dtsi b/arch/arm/boot/dts/nxp/vf/vf610-colibri.dtsi
index 607cec2df861..20aed3946214 100644
--- a/arch/arm/boot/dts/vf610-colibri.dtsi
+++ b/arch/arm/boot/dts/nxp/vf/vf610-colibri.dtsi
@@ -8,7 +8,6 @@
 
 / {
 	model = "Toradex Colibri VF61 COM";
-	compatible = "toradex,vf610-colibri_vf61", "fsl,vf610";
 
 	memory@80000000 {
 		device_type = "memory";
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-cosmic.dts b/arch/arm/boot/dts/nxp/vf/vf610-cosmic.dts
new file mode 100644
index 000000000000..f1e6344b0c69
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/vf/vf610-cosmic.dts
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ * Copyright 2013 Linaro Limited
+ */
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+	model = "PHYTEC Cosmic/Cosmic+ Board";
+	compatible = "phytec,vf610-cosmic", "fsl,vf610";
+
+	chosen {
+		bootargs = "console=ttyLP1,115200";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+
+	enet_ext: enet_ext {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+	};
+};
+
+&clks {
+	clocks = <&sxosc>, <&fxosc>, <&enet_ext>;
+	clock-names = "sxosc", "fxosc", "enet_ext";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&fec1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
+			VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
+			VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef
+			VF610_PAD_PTA27__ESDHC1_DAT1	0x31ef
+			VF610_PAD_PTA28__ESDHC1_DATA2	0x31ef
+			VF610_PAD_PTA29__ESDHC1_DAT3	0x31ef
+			VF610_PAD_PTB28__GPIO_98	0x219d
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
+			VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
+			VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
+			VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30d1
+			VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
+			VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
+			VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
+			VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
+			VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			VF610_PAD_PTB4__UART1_TX		0x21a2
+			VF610_PAD_PTB5__UART1_RX		0x21a1
+		>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/vf610-pinfunc.h b/arch/arm/boot/dts/nxp/vf/vf610-pinfunc.h
index f1e5a7cf58a9..b7b7322a2d1b 100644
--- a/arch/arm/boot/dts/vf610-pinfunc.h
+++ b/arch/arm/boot/dts/nxp/vf/vf610-pinfunc.h
@@ -420,7 +420,7 @@
 #define VF610_PAD_PTD29__FTM3_CH2		0x104 0x000 ALT4 0x0
 #define VF610_PAD_PTD29__DSPI2_SIN		0x104 0x000 ALT5 0x0
 #define VF610_PAD_PTD29__DEBUG_OUT11		0x104 0x000 ALT7 0x0
-#define VF610_PAD_PTD28__GPIO_66	 	0x108 0x000 ALT0 0x0
+#define VF610_PAD_PTD28__GPIO_66		0x108 0x000 ALT0 0x0
 #define VF610_PAD_PTD28__FB_AD28		0x108 0x000 ALT1 0x0
 #define VF610_PAD_PTD28__NF_IO12		0x108 0x000 ALT2 0x0
 #define VF610_PAD_PTD28__I2C2_SCL		0x108 0x34C ALT3 0x1
@@ -802,5 +802,55 @@
 #define VF610_PAD_PTE28__EWM_OUT		0x214 0x000 ALT7 0x0
 #define VF610_PAD_PTA7__GPIO_134		0x218 0x000 ALT0 0x0
 #define VF610_PAD_PTA7__VIU_PIX_CLK		0x218 0x3AC ALT1 0x1
+#define VF610_PAD_DDR_RESETB			0x21c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A15__DDR_A_15		0x220 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A14__DDR_A_14		0x224 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A13__DDR_A_13		0x228 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A12__DDR_A_12		0x22c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A11__DDR_A_11		0x230 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A10__DDR_A_10		0x234 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A9__DDR_A_9		0x238 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A8__DDR_A_8		0x23c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A7__DDR_A_7		0x240 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A6__DDR_A_6		0x244 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A5__DDR_A_5		0x248 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A4__DDR_A_4		0x24c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A3__DDR_A_3		0x250 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A2__DDR_A_2		0x254 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A1__DDR_A_1		0x258 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A0__DDR_A_0		0x25c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_BA2__DDR_BA_2		0x260 0x000 ALT0 0x0
+#define VF610_PAD_DDR_BA1__DDR_BA_1		0x264 0x000 ALT0 0x0
+#define VF610_PAD_DDR_BA0__DDR_BA_0		0x268 0x000 ALT0 0x0
+#define VF610_PAD_DDR_CAS__DDR_CAS_B		0x26c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_CKE__DDR_CKE_0		0x270 0x000 ALT0 0x0
+#define VF610_PAD_DDR_CLK__DDR_CLK_0		0x274 0x000 ALT0 0x0
+#define VF610_PAD_DDR_CS__DDR_CS_B_0		0x278 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D15__DDR_D_15		0x27c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D14__DDR_D_14		0x280 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D13__DDR_D_13		0x284 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D12__DDR_D_12		0x288 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D11__DDR_D_11		0x28c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D10__DDR_D_10		0x290 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D9__DDR_D_9		0x294 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D8__DDR_D_8		0x298 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D7__DDR_D_7		0x29c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D6__DDR_D_6		0x2a0 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D5__DDR_D_5		0x2a4 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D4__DDR_D_4		0x2a8 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D3__DDR_D_3		0x2ac 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D2__DDR_D_2		0x2b0 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D1__DDR_D_1		0x2b4 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D0__DDR_D_0		0x2b8 0x000 ALT0 0x0
+#define VF610_PAD_DDR_DQM1__DDR_DQM_1		0x2bc 0x000 ALT0 0x0
+#define VF610_PAD_DDR_DQM0__DDR_DQM_0		0x2c0 0x000 ALT0 0x0
+#define VF610_PAD_DDR_DQS1__DDR_DQS_1		0x2c4 0x000 ALT0 0x0
+#define VF610_PAD_DDR_DQS0__DDR_DQS_0		0x2c8 0x000 ALT0 0x0
+#define VF610_PAD_DDR_RAS__DDR_RAS_B		0x2cc 0x000 ALT0 0x0
+#define VF610_PAD_DDR_WE__DDR_WE_B		0x2d0 0x000 ALT0 0x0
+#define VF610_PAD_DDR_ODT1__DDR_ODT_0		0x2d4 0x000 ALT0 0x0
+#define VF610_PAD_DDR_ODT0__DDR_ODT_1		0x2d8 0x000 ALT0 0x0
+#define VF610_PAD_DDR_DDRBYTE1__DDR_DDRBYTE1	0x2dc 0x000 ALT0 0x0
+#define VF610_PAD_DDR_DDRBYTE2__DDR_DDRBYTE2	0x2e0 0x000 ALT0 0x0
 
 #endif
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-twr.dts b/arch/arm/boot/dts/nxp/vf/vf610-twr.dts
new file mode 100644
index 000000000000..e7c2f6d46ab2
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/vf/vf610-twr.dts
@@ -0,0 +1,364 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+	model = "VF610 Tower Board";
+	compatible = "fsl,vf610-twr", "fsl,vf610";
+
+	chosen {
+		bootargs = "console=ttyLP1,115200";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x8000000>;
+	};
+
+	audio_ext: mclk_osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	enet_ext: eth_osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+	};
+
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_mcu";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker Ext",
+			"Line", "Line In Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"Microphone Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"Speaker Ext", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+			frame-master;
+			bitclock-master;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&codec>;
+			frame-master;
+			bitclock-master;
+		};
+	};
+};
+
+&adc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_ad5>;
+	vref-supply = <&reg_vcc_3v3_mcu>;
+	status = "okay";
+};
+
+&clks {
+	clocks = <&sxosc>, <&fxosc>, <&enet_ext>, <&audio_ext>;
+	clock-names = "sxosc", "fxosc", "enet_ext", "audio_ext";
+	assigned-clocks = <&clks VF610_CLK_ENET_SEL>,
+			  <&clks VF610_CLK_ENET_TS_SEL>;
+	assigned-clock-parents = <&clks VF610_CLK_ENET_EXT>,
+				 <&clks VF610_CLK_ENET_EXT>;
+};
+
+&dspi0 {
+	bus-num = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dspi0>;
+	status = "okay";
+
+	sflash: at26df081a@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "atmel,at26df081a";
+		spi-max-frequency = <16000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+	};
+};
+
+&edma0 {
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	cd-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec0 {
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
+};
+
+&fec1 {
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+	       #sound-dai-cells = <0>;
+	       compatible = "fsl,sgtl5000";
+	       reg = <0x0a>;
+	       VDDA-supply = <&reg_3p3v>;
+	       VDDIO-supply = <&reg_3p3v>;
+	       clocks = <&clks VF610_CLK_SAI2>;
+	};
+};
+
+&iomuxc {
+	pinctrl_adc0_ad5: adc0ad5grp {
+		fsl,pins = <
+			VF610_PAD_PTC30__ADC0_SE5		0xa1
+		>;
+	};
+
+	pinctrl_dspi0: dspi0grp {
+		fsl,pins = <
+			VF610_PAD_PTB19__DSPI0_CS0		0x1182
+			VF610_PAD_PTB20__DSPI0_SIN		0x1181
+			VF610_PAD_PTB21__DSPI0_SOUT		0x1182
+			VF610_PAD_PTB22__DSPI0_SCK		0x1182
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
+			VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
+			VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef
+			VF610_PAD_PTA27__ESDHC1_DAT1	0x31ef
+			VF610_PAD_PTA28__ESDHC1_DATA2	0x31ef
+			VF610_PAD_PTA29__ESDHC1_DAT3	0x31ef
+			VF610_PAD_PTA7__GPIO_134	0x219d
+		>;
+	};
+
+	pinctrl_fec0: fec0grp {
+		fsl,pins = <
+			VF610_PAD_PTA6__RMII_CLKIN		0x30d1
+			VF610_PAD_PTC0__ENET_RMII0_MDC		0x30d3
+			VF610_PAD_PTC1__ENET_RMII0_MDIO		0x30d1
+			VF610_PAD_PTC2__ENET_RMII0_CRS		0x30d1
+			VF610_PAD_PTC3__ENET_RMII0_RXD1		0x30d1
+			VF610_PAD_PTC4__ENET_RMII0_RXD0		0x30d1
+			VF610_PAD_PTC5__ENET_RMII0_RXER		0x30d1
+			VF610_PAD_PTC6__ENET_RMII0_TXD1		0x30d2
+			VF610_PAD_PTC7__ENET_RMII0_TXD0		0x30d2
+			VF610_PAD_PTC8__ENET_RMII0_TXEN		0x30d2
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
+			VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
+			VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
+			VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30d1
+			VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
+			VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
+			VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
+			VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
+			VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
+		>;
+	};
+
+	pinctrl_i2c0: i2c0grp {
+		fsl,pins = <
+			VF610_PAD_PTB14__I2C0_SCL		0x30d3
+			VF610_PAD_PTB15__I2C0_SDA		0x30d3
+		>;
+	};
+
+	pinctrl_nfc: nfcgrp {
+		fsl,pins = <
+			VF610_PAD_PTD31__NF_IO15	0x28df
+			VF610_PAD_PTD30__NF_IO14	0x28df
+			VF610_PAD_PTD29__NF_IO13	0x28df
+			VF610_PAD_PTD28__NF_IO12	0x28df
+			VF610_PAD_PTD27__NF_IO11	0x28df
+			VF610_PAD_PTD26__NF_IO10	0x28df
+			VF610_PAD_PTD25__NF_IO9		0x28df
+			VF610_PAD_PTD24__NF_IO8		0x28df
+			VF610_PAD_PTD23__NF_IO7		0x28df
+			VF610_PAD_PTD22__NF_IO6		0x28df
+			VF610_PAD_PTD21__NF_IO5		0x28df
+			VF610_PAD_PTD20__NF_IO4		0x28df
+			VF610_PAD_PTD19__NF_IO3		0x28df
+			VF610_PAD_PTD18__NF_IO2		0x28df
+			VF610_PAD_PTD17__NF_IO1		0x28df
+			VF610_PAD_PTD16__NF_IO0		0x28df
+			VF610_PAD_PTB24__NF_WE_B	0x28c2
+			VF610_PAD_PTB25__NF_CE0_B	0x28c2
+			VF610_PAD_PTB27__NF_RE_B	0x28c2
+			VF610_PAD_PTC26__NF_RB_B	0x283d
+			VF610_PAD_PTC27__NF_ALE		0x28c2
+			VF610_PAD_PTC28__NF_CLE		0x28c2
+		>;
+	};
+
+	pinctrl_pwm0: pwm0grp {
+		fsl,pins = <
+			VF610_PAD_PTB0__FTM0_CH0		0x1582
+			VF610_PAD_PTB1__FTM0_CH1		0x1582
+			VF610_PAD_PTB2__FTM0_CH2		0x1582
+			VF610_PAD_PTB3__FTM0_CH3		0x1582
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			VF610_PAD_PTA16__SAI2_TX_BCLK		0x02ed
+			VF610_PAD_PTA18__SAI2_TX_DATA		0x02ee
+			VF610_PAD_PTA19__SAI2_TX_SYNC		0x02ed
+			VF610_PAD_PTA21__SAI2_RX_BCLK		0x02ed
+			VF610_PAD_PTA22__SAI2_RX_DATA		0x02ed
+			VF610_PAD_PTA23__SAI2_RX_SYNC		0x02ed
+			VF610_PAD_PTB18__EXT_AUDIO_MCLK		0x02ed
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			VF610_PAD_PTB4__UART1_TX		0x21a2
+			VF610_PAD_PTB5__UART1_RX		0x21a1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			VF610_PAD_PTB6__UART2_TX		0x21a2
+			VF610_PAD_PTB7__UART2_RX		0x21a1
+		>;
+	};
+};
+
+&nfc {
+	assigned-clocks = <&clks VF610_CLK_NFC>;
+	assigned-clock-rates = <33000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
+	status = "okay";
+
+	nand@0 {
+		compatible = "fsl,vf610-nfc-nandcs";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		nand-bus-width = <16>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <2048>;
+		nand-on-flash-bbt;
+	};
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0>;
+	status = "okay";
+};
+
+&sai2 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbdev0 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbmisc0 {
+	status = "okay";
+};
+
+&usbmisc1 {
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/vf610-zii-cfu1.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts
index 96495d965163..929426c1299c 100644
--- a/arch/arm/boot/dts/vf610-zii-cfu1.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts
@@ -68,8 +68,8 @@
 		pinctrl-0 = <&pinctrl_optical>;
 		pinctrl-names = "default";
 		i2c-bus = <&i2c0>;
-		los-gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>;
-		tx-disable-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 	};
 
 	supply-voltage-monitor {
@@ -162,7 +162,7 @@
 		suppress-preamble;
 		status = "okay";
 
-		switch0: switch0@0 {
+		switch0: ethernet-switch@0 {
 			compatible = "marvell,mv88e6085";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_switch>;
@@ -173,26 +173,26 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
-			ports {
+			ethernet-ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				port@0 {
+				ethernet-port@0 {
 					reg = <0>;
 					label = "eth_cu_1000_1";
 				};
 
-				port@1 {
+				ethernet-port@1 {
 					reg = <1>;
 					label = "eth_cu_1000_2";
 				};
 
-				port@2 {
+				ethernet-port@2 {
 					reg = <2>;
 					label = "eth_cu_1000_3";
 				};
 
-				port@5 {
+				ethernet-port@5 {
 					reg = <5>;
 					label = "eth_fc_1000_1";
 					phy-mode = "1000base-x";
@@ -200,9 +200,9 @@
 					sfp = <&sff>;
 				};
 
-				port@6 {
+				ethernet-port@6 {
 					reg = <6>;
-					label = "cpu";
+					phy-mode = "rmii";
 					ethernet = <&fec1>;
 
 					fixed-link {
@@ -333,7 +333,7 @@
 		>;
 	};
 
-	pinctrl_leds_debug: pinctrl-leds-debug {
+	pinctrl_leds_debug: pinctrl-leds-debuggrp {
 		fsl,pins = <
 			VF610_PAD_PTD3__GPIO_82			0x31c2
 			VF610_PAD_PTE3__GPIO_108		0x31c2
diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts
index 043ddd70372f..be6147239362 100644
--- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts
@@ -75,7 +75,7 @@
 
 					port@6 {
 						reg = <6>;
-						label = "cpu";
+						phy-mode = "rmii";
 						ethernet = <&fec1>;
 
 						fixed-link {
@@ -149,7 +149,7 @@
 						reg = <5>;
 						label = "dsa";
 						link = <&switch2port9>;
-						phy-mode = "rgmii-txid";
+						phy-mode = "1000base-x";
 
 						fixed-link {
 							speed = <1000>;
@@ -211,12 +211,14 @@
 						reg = <0>;
 						label = "lan6";
 						phy-handle = <&switch2phy0>;
+						phy-mode = "sgmii";
 					};
 
 					port@1 {
 						reg = <1>;
 						label = "lan7";
 						phy-handle = <&switch2phy1>;
+						phy-mode = "sgmii";
 					};
 
 					port@2 {
@@ -252,7 +254,7 @@
 					switch2port9: port@9 {
 						reg = <9>;
 						label = "dsa";
-						phy-mode = "rgmii-txid";
+						phy-mode = "1000base-x";
 						link = <&switch1port5
 							&switch0port5>;
 
@@ -286,17 +288,17 @@
 		};
 	};
 
-	spi0 {
+	spi-0 {
 		compatible = "spi-gpio";
 		pinctrl-0 = <&pinctrl_gpio_spi0>;
 		pinctrl-names = "default";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		gpio-sck  = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-		gpio-mosi = <&gpio1 11 GPIO_ACTIVE_HIGH>;
-		gpio-miso = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-		cs-gpios  = <&gpio1  9 GPIO_ACTIVE_LOW
-			     &gpio1  8 GPIO_ACTIVE_HIGH>;
+		sck-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio1 9 GPIO_ACTIVE_LOW
+			    &gpio1 8 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <2>;
 
 		flash@0 {
@@ -336,6 +338,7 @@
 		reg = <0x22>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
 		interrupt-controller;
 		interrupt-parent = <&gpio3>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
@@ -343,7 +346,7 @@
 };
 
 &i2c2 {
-	tca9548@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		pinctrl-0 = <&pinctrl_i2c_mux_reset>;
 		pinctrl-names = "default";
@@ -409,13 +412,13 @@
 };
 
 &iomuxc {
-	pinctrl_gpio_e6185_eeprom_sel: pinctrl-gpio-e6185-eeprom-spi0 {
+	pinctrl_gpio_e6185_eeprom_sel: pinctrl-gpio-e6185-eeprom-spi0-grp {
 		fsl,pins = <
 			VF610_PAD_PTE27__GPIO_132	0x33e2
 		>;
 	};
 
-	pinctrl_gpio_spi0: pinctrl-gpio-spi0 {
+	pinctrl_gpio_spi0: pinctrl-gpio-spi0-grp {
 		fsl,pins = <
 			VF610_PAD_PTB22__GPIO_44	0x33e2
 			VF610_PAD_PTB21__GPIO_43	0x33e2
@@ -425,7 +428,7 @@
 		>;
 	};
 
-	pinctrl_mdio_mux: pinctrl-mdio-mux {
+	pinctrl_mdio_mux: pinctrl-mdio-mux-grp {
 		fsl,pins = <
 			VF610_PAD_PTA18__GPIO_8		0x31c2
 			VF610_PAD_PTA19__GPIO_9		0x31c2
@@ -434,7 +437,7 @@
 		>;
 	};
 
-	pinctrl_pca9554_22: pinctrl-pca95540-22 {
+	pinctrl_pca9554_22: pinctrl-pca95540-22-grp {
 		fsl,pins = <
 			VF610_PAD_PTB28__GPIO_98	0x219d
 		>;
diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-c.dts
index de79dcfd32e6..79ea7cf57a4d 100644
--- a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-c.dts
@@ -44,7 +44,7 @@
 
 					port@0 {
 						reg = <0>;
-						label = "cpu";
+						phy-mode = "rmii";
 						ethernet = <&fec1>;
 
 						fixed-link {
@@ -82,6 +82,11 @@
 						label = "dsa";
 						phy-mode = "xaui";
 						link = <&switch1port10>;
+
+						fixed-link {
+							speed = <10000>;
+							full-duplex;
+						};
 					};
 				};
 
@@ -174,6 +179,11 @@
 						label = "dsa";
 						phy-mode = "xaui";
 						link = <&switch0port10>;
+
+						fixed-link {
+							speed = <10000>;
+							full-duplex;
+						};
 					};
 				};
 				mdio {
@@ -259,7 +269,7 @@
 		xtal-trim = /bits/ 8 <0x06>;
 
 		sleep-gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>;
-		reset-gpio = <&gpio6 10 GPIO_ACTIVE_HIGH>;
+		reset-gpio = <&gpio6 10 GPIO_ACTIVE_LOW>;
 
 		fsl,spi-cs-sck-delay = <180>;
 		fsl,spi-sck-cs-delay = <250>;
@@ -301,7 +311,7 @@
 	 *    I/O14 - OPT1_TX_DIS
 	 *    I/O15 - OPT2_TX_DIS
 	 */
-	gpio6: sx1503@20 {
+	gpio6: pinctrl@20 {
 		compatible = "semtech,sx1503q";
 
 		pinctrl-names = "default";
@@ -340,7 +350,7 @@
 };
 
 &i2c2 {
-	tca9548@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		pinctrl-0 = <&pinctrl_i2c_mux_reset>;
 		pinctrl-names = "default";
@@ -382,7 +392,7 @@
 };
 
 &gpio0 {
-	eth0_intrp {
+	eth0-intrp-hog {
 		gpio-hog;
 		gpios = <23 GPIO_ACTIVE_HIGH>;
 		input;
@@ -391,7 +401,7 @@
 };
 
 &gpio3 {
-	eth0_intrp {
+	eth0-intrp-hog {
 		gpio-hog;
 		gpios = <2 GPIO_ACTIVE_HIGH>;
 		input;
@@ -419,7 +429,7 @@
 };
 
 &iomuxc {
-	pinctr_atzb_rf_233: pinctrl-atzb-rf-233 {
+	pinctr_atzb_rf_233: pinctrl-atzb-rf-233grp {
 		fsl,pins = <
 			VF610_PAD_PTB2__GPIO_24		0x31c2
 			VF610_PAD_PTE27__GPIO_132	0x33e2
@@ -427,7 +437,7 @@
 	};
 
 
-	pinctrl_sx1503_20: pinctrl-sx1503-20 {
+	pinctrl_sx1503_20: pinctrl-sx1503-20grp {
 		fsl,pins = <
 			VF610_PAD_PTB1__GPIO_23		0x219d
 		>;
@@ -440,7 +450,7 @@
 		>;
 	};
 
-	pinctrl_mdio_mux: pinctrl-mdio-mux {
+	pinctrl_mdio_mux: pinctrl-mdio-muxgrp {
 		fsl,pins = <
 			VF610_PAD_PTA18__GPIO_8		0x31c2
 			VF610_PAD_PTA19__GPIO_9		0x31c2
@@ -448,7 +458,7 @@
 		>;
 	};
 
-	pinctrl_fec0_phy_int: pinctrl-fec0-phy-int {
+	pinctrl_fec0_phy_int: pinctrl-fec0-phy-intgrp {
 		fsl,pins = <
 			VF610_PAD_PTB28__GPIO_98	0x219d
 		>;
diff --git a/arch/arm/boot/dts/vf610-zii-dev.dtsi b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev.dtsi
index f8299f33a692..91cc496ffb90 100644
--- a/arch/arm/boot/dts/vf610-zii-dev.dtsi
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev.dtsi
@@ -59,7 +59,7 @@
 		pinctrl-0 = <&pinctrl_leds_debug>;
 		pinctrl-names = "default";
 
-		debug {
+		led-debug {
 			label = "zii:green:debug1";
 			gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
@@ -335,7 +335,7 @@
 		>;
 	};
 
-	pinctrl_gpio_spi0: pinctrl-gpio-spi0 {
+	pinctrl_gpio_spi0: pinctrl-gpio-spi0-grp {
 		fsl,pins = <
 			VF610_PAD_PTB22__GPIO_44	0x33e2
 			VF610_PAD_PTB21__GPIO_43	0x33e2
@@ -345,19 +345,19 @@
 		>;
 	};
 
-	pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
+	pinctrl_gpio_switch0: pinctrl-gpio-switch0-grp {
 		fsl,pins = <
 			VF610_PAD_PTB5__GPIO_27		0x219d
 		>;
 	};
 
-	pinctrl_gpio_switch1: pinctrl-gpio-switch1 {
+	pinctrl_gpio_switch1: pinctrl-gpio-switch1-grp {
 		fsl,pins = <
 			VF610_PAD_PTB4__GPIO_26		0x219d
 		>;
 	};
 
-	pinctrl_i2c_mux_reset: pinctrl-i2c-mux-reset {
+	pinctrl_i2c_mux_reset: pinctrl-i2c-mux-reset-grp {
 		fsl,pins = <
 			 VF610_PAD_PTE14__GPIO_119	0x31c2
 			 >;
@@ -370,7 +370,7 @@
 		>;
 	};
 
-	pinctrl_i2c0_gpio: i2c0grp-gpio {
+	pinctrl_i2c0_gpio: i2c0-gpio-grp {
 		fsl,pins = <
 			VF610_PAD_PTB14__GPIO_36	0x31c2
 			VF610_PAD_PTB15__GPIO_37	0x31c2
@@ -392,7 +392,7 @@
 		>;
 	};
 
-	pinctrl_leds_debug: pinctrl-leds-debug {
+	pinctrl_leds_debug: pinctrl-leds-debug-grp {
 		fsl,pins = <
 			 VF610_PAD_PTD20__GPIO_74	0x31c2
 			 >;
@@ -436,7 +436,7 @@
 		>;
 	};
 
-	pinctrl_usb_vbus: pinctrl-usb-vbus {
+	pinctrl_usb_vbus: pinctrl-usb-vbus-grp {
 		fsl,pins = <
 			VF610_PAD_PTA16__GPIO_6	0x31c2
 		>;
diff --git a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts
index 040a1f8b6130..8020a644dd9d 100644
--- a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts
@@ -23,7 +23,7 @@
 		pinctrl-0 = <&pinctrl_leds_debug>;
 		pinctrl-names = "default";
 
-		debug {
+		led-debug {
 			label = "zii:green:debug1";
 			gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
@@ -47,19 +47,19 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0: switch0@0 {
+			switch0: ethernet-switch@0 {
 				compatible = "marvell,mv88e6190";
 				reg = <0>;
 				dsa,member = <0 0>;
 				eeprom-length = <65536>;
 
-				ports {
+				ethernet-ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					port@0 {
+					ethernet-port@0 {
 						reg = <0>;
-						label = "cpu";
+						phy-mode = "rmii";
 						ethernet = <&fec1>;
 
 						fixed-link {
@@ -68,37 +68,37 @@
 						};
 					};
 
-					port@1 {
+					ethernet-port@1 {
 						reg = <1>;
 						label = "aib2main_1";
 					};
 
-					port@2 {
+					ethernet-port@2 {
 						reg = <2>;
 						label = "aib2main_2";
 					};
 
-					port@3 {
+					ethernet-port@3 {
 						reg = <3>;
 						label = "eth_cu_1000_5";
 					};
 
-					port@4 {
+					ethernet-port@4 {
 						reg = <4>;
 						label = "eth_cu_1000_6";
 					};
 
-					port@5 {
+					ethernet-port@5 {
 						reg = <5>;
 						label = "eth_cu_1000_4";
 					};
 
-					port@6 {
+					ethernet-port@6 {
 						reg = <6>;
 						label = "eth_cu_1000_7";
 					};
 
-					port@7 {
+					ethernet-port@7 {
 						reg = <7>;
 						label = "modem_pic";
 
@@ -108,13 +108,18 @@
 						};
 					};
 
-					switch0port10: port@10 {
+					switch0port10: ethernet-port@10 {
 						reg = <10>;
 						label = "dsa";
 						phy-mode = "xgmii";
 						link = <&switch1port10
 							&switch3port10
 							&switch2port10>;
+
+						fixed-link {
+							speed = <10000>;
+							full-duplex;
+						};
 					};
 				};
 			};
@@ -125,44 +130,54 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch1: switch1@0 {
+			switch1: ethernet-switch@0 {
 				compatible = "marvell,mv88e6190";
 				reg = <0>;
 				dsa,member = <0 1>;
 				eeprom-length = <65536>;
 
-				ports {
+				ethernet-ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					port@1 {
+					ethernet-port@1 {
 						reg = <1>;
 						label = "eth_cu_1000_3";
 					};
 
-					port@2 {
+					ethernet-port@2 {
 						reg = <2>;
 						label = "eth_cu_100_2";
 					};
 
-					port@3 {
+					ethernet-port@3 {
 						reg = <3>;
 						label = "eth_cu_100_3";
 					};
 
-					switch1port9: port@9 {
+					switch1port9: ethernet-port@9 {
 						reg = <9>;
 						label = "dsa";
 						phy-mode = "xgmii";
 						link = <&switch3port10
 							&switch2port10>;
+
+						fixed-link {
+							speed = <10000>;
+							full-duplex;
+						};
 					};
 
-					switch1port10: port@10 {
+					switch1port10: ethernet-port@10 {
 						reg = <10>;
 						label = "dsa";
 						phy-mode = "xgmii";
 						link = <&switch0port10>;
+
+						fixed-link {
+							speed = <10000>;
+							full-duplex;
+						};
 					};
 				};
 			};
@@ -173,17 +188,17 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch2: switch2@0 {
+			switch2: ethernet-switch@0 {
 				compatible = "marvell,mv88e6190";
 				reg = <0>;
 				dsa,member = <0 2>;
 				eeprom-length = <65536>;
 
-				ports {
+				ethernet-ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					port@2 {
+					ethernet-port@2 {
 						reg = <2>;
 						label = "eth_fc_1000_2";
 						phy-mode = "1000base-x";
@@ -191,7 +206,7 @@
 						sfp = <&sff1>;
 					};
 
-					port@3 {
+					ethernet-port@3 {
 						reg = <3>;
 						label = "eth_fc_1000_3";
 						phy-mode = "1000base-x";
@@ -199,7 +214,7 @@
 						sfp = <&sff2>;
 					};
 
-					port@4 {
+					ethernet-port@4 {
 						reg = <4>;
 						label = "eth_fc_1000_4";
 						phy-mode = "1000base-x";
@@ -207,7 +222,7 @@
 						sfp = <&sff3>;
 					};
 
-					port@5 {
+					ethernet-port@5 {
 						reg = <5>;
 						label = "eth_fc_1000_5";
 						phy-mode = "1000base-x";
@@ -215,7 +230,7 @@
 						sfp = <&sff4>;
 					};
 
-					port@6 {
+					ethernet-port@6 {
 						reg = <6>;
 						label = "eth_fc_1000_6";
 						phy-mode = "1000base-x";
@@ -223,7 +238,7 @@
 						sfp = <&sff5>;
 					};
 
-					port@7 {
+					ethernet-port@7 {
 						reg = <7>;
 						label = "eth_fc_1000_7";
 						phy-mode = "1000base-x";
@@ -231,7 +246,7 @@
 						sfp = <&sff6>;
 					};
 
-					port@9 {
+					ethernet-port@9 {
 						reg = <9>;
 						label = "eth_fc_1000_1";
 						phy-mode = "1000base-x";
@@ -239,13 +254,18 @@
 						sfp = <&sff0>;
 					};
 
-					switch2port10: port@10 {
+					switch2port10: ethernet-port@10 {
 						reg = <10>;
 						label = "dsa";
 						phy-mode = "2500base-x";
 						link = <&switch3port9
 							&switch1port9
 							&switch0port10>;
+
+						fixed-link {
+							speed = <2500>;
+							full-duplex;
+						};
 					};
 				};
 			};
@@ -256,17 +276,17 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch3: switch3@0 {
+			switch3: ethernet-switch@0 {
 				compatible = "marvell,mv88e6190";
 				reg = <0>;
 				dsa,member = <0 3>;
 				eeprom-length = <65536>;
 
-				ports {
+				ethernet-ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					port@2 {
+					ethernet-port@2 {
 						reg = <2>;
 						label = "eth_fc_1000_8";
 						phy-mode = "1000base-x";
@@ -274,7 +294,7 @@
 						sfp = <&sff7>;
 					};
 
-					port@3 {
+					ethernet-port@3 {
 						reg = <3>;
 						label = "eth_fc_1000_9";
 						phy-mode = "1000base-x";
@@ -282,7 +302,7 @@
 						sfp = <&sff8>;
 					};
 
-					port@4 {
+					ethernet-port@4 {
 						reg = <4>;
 						label = "eth_fc_1000_10";
 						phy-mode = "1000base-x";
@@ -290,19 +310,29 @@
 						sfp = <&sff9>;
 					};
 
-					switch3port9: port@9 {
+					switch3port9: ethernet-port@9 {
 						reg = <9>;
 						label = "dsa";
 						phy-mode = "2500base-x";
 						link = <&switch2port10>;
+
+						fixed-link {
+							speed = <2500>;
+							full-duplex;
+						};
 					};
 
-					switch3port10: port@10 {
+					switch3port10: ethernet-port@10 {
 						reg = <10>;
 						label = "dsa";
 						phy-mode = "xgmii";
 						link = <&switch1port9
 							&switch0port10>;
+
+						fixed-link {
+							speed = <10000>;
+							full-duplex;
+						};
 					};
 				};
 			};
@@ -553,7 +583,7 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	gpio9: io-expander@20 {
+	gpio9: pinctrl@20 {
 		compatible = "semtech,sx1503q";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_sx1503_20>;
@@ -593,7 +623,6 @@
 
 	i2c-mux@70 {
 		compatible = "nxp,pca9548";
-		pinctrl-names = "default";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x70>;
@@ -632,7 +661,6 @@
 
 	i2c-mux@71 {
 		compatible = "nxp,pca9548";
-		pinctrl-names = "default";
 		reg = <0x71>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -717,7 +745,7 @@
 		>;
 	};
 
-	pinctrl_dspi2: dspi2gpio {
+	pinctrl_dspi2: dspi2gpiogrp {
 		fsl,pins = <
 			VF610_PAD_PTD30__GPIO_64		0x33e2
 			VF610_PAD_PTD29__GPIO_65		0x33e1
@@ -789,13 +817,13 @@
 		>;
 	};
 
-	pinctrl_leds_debug: pinctrl-leds-debug {
+	pinctrl_leds_debug: pinctrl-leds-debuggrp {
 		fsl,pins = <
 			 VF610_PAD_PTB26__GPIO_96		0x31c2
 		   >;
 	};
 
-	pinctrl_mdio_mux: pinctrl-mdio-mux {
+	pinctrl_mdio_mux: pinctrl-mdio-muxgrp {
 		fsl,pins = <
 			VF610_PAD_PTE27__GPIO_132		0x31c2
 			VF610_PAD_PTE28__GPIO_133		0x31c2
@@ -815,7 +843,7 @@
 		>;
 	};
 
-	pinctrl_sx1503_20: pinctrl-sx1503-20 {
+	pinctrl_sx1503_20: pinctrl-sx1503-20grp {
 		fsl,pins = <
 			VF610_PAD_PTD31__GPIO_63		0x219d
 			>;
diff --git a/arch/arm/boot/dts/vf610-zii-spb4.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts
index 6c6ec46fd015..423d185c971f 100644
--- a/arch/arm/boot/dts/vf610-zii-spb4.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts
@@ -123,7 +123,7 @@
 		suppress-preamble;
 		status = "okay";
 
-		switch0: switch0@0 {
+		switch0: ethernet-switch@0 {
 			compatible = "marvell,mv88e6190";
 			pinctrl-0 = <&pinctrl_gpio_switch0>;
 			pinctrl-names = "default";
@@ -134,13 +134,13 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
-			ports {
+			ethernet-ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				port@0 {
+				ethernet-port@0 {
 					reg = <0>;
-					label = "cpu";
+					phy-mode = "rmii";
 					ethernet = <&fec1>;
 
 					fixed-link {
@@ -149,32 +149,32 @@
 					};
 				};
 
-				port@1 {
+				ethernet-port@1 {
 					reg = <1>;
 					label = "eth_cu_1000_1";
 				};
 
-				port@2 {
+				ethernet-port@2 {
 					reg = <2>;
 					label = "eth_cu_1000_2";
 				};
 
-				port@3 {
+				ethernet-port@3 {
 					reg = <3>;
 					label = "eth_cu_1000_3";
 				};
 
-				port@4 {
+				ethernet-port@4 {
 					reg = <4>;
 					label = "eth_cu_1000_4";
 				};
 
-				port@5 {
+				ethernet-port@5 {
 					reg = <5>;
 					label = "eth_cu_1000_5";
 				};
 
-				port@6 {
+				ethernet-port@6 {
 					reg = <6>;
 					label = "eth_cu_1000_6";
 				};
@@ -241,7 +241,7 @@
 	pinctrl-0 = <&pinctrl_uart2>;
 	status = "okay";
 
-	rave-sp {
+	mcu {
 		compatible = "zii,rave-sp-rdu2";
 		current-speed = <1000000>;
 		#address-cells = <1>;
@@ -323,7 +323,7 @@
 		>;
 	};
 
-	pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
+	pinctrl_gpio_switch0: pinctrl-gpio-switch0grp {
 		fsl,pins = <
 			VF610_PAD_PTB28__GPIO_98		0x219d
 		>;
@@ -343,7 +343,7 @@
 		>;
 	};
 
-	pinctrl_leds_debug: pinctrl-leds-debug {
+	pinctrl_leds_debug: pinctrl-leds-debuggrp {
 		fsl,pins = <
 			VF610_PAD_PTD3__GPIO_82			0x31c2
 		>;
diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts
index 73fdace4cb42..d5c7f710c314 100644
--- a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts
@@ -112,7 +112,7 @@
 		suppress-preamble;
 		status = "okay";
 
-		switch0: switch0@0 {
+		switch0: ethernet-switch@0 {
 			compatible = "marvell,mv88e6190";
 			pinctrl-0 = <&pinctrl_gpio_switch0>;
 			pinctrl-names = "default";
@@ -123,13 +123,13 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
-			ports {
+			ethernet-ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				port@0 {
+				ethernet-port@0 {
 					reg = <0>;
-					label = "cpu";
+					phy-mode = "rmii";
 					ethernet = <&fec1>;
 
 					fixed-link {
@@ -138,27 +138,27 @@
 					};
 				};
 
-				port@1 {
+				ethernet-port@1 {
 					reg = <1>;
 					label = "eth_cu_100_3";
 				};
 
-				port@5 {
+				ethernet-port@5 {
 					reg = <5>;
 					label = "eth_cu_1000_4";
 				};
 
-				port@6 {
+				ethernet-port@6 {
 					reg = <6>;
 					label = "eth_cu_1000_5";
 				};
 
-				port@8 {
+				ethernet-port@8 {
 					reg = <8>;
 					label = "eth_cu_1000_1";
 				};
 
-				port@9 {
+				ethernet-port@9 {
 					reg = <9>;
 					label = "eth_cu_1000_2";
 					phy-handle = <&phy9>;
@@ -167,12 +167,12 @@
 				};
 			};
 
-			mdio1 {
+			mdio-external {
 				compatible = "marvell,mv88e6xxx-mdio-external";
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				phy9: phy9@0 {
+				phy9: ethernet-phy@0 {
 					compatible = "ethernet-phy-ieee802.3-c45";
 					pinctrl-0 = <&pinctrl_gpio_phy9>;
 					pinctrl-names = "default";
@@ -284,13 +284,13 @@
 		>;
 	};
 
-	pinctrl_gpio_phy9: pinctrl-gpio-phy9 {
+	pinctrl_gpio_phy9: pinctrl-gpio-phy9grp {
 		fsl,pins = <
 			VF610_PAD_PTB24__GPIO_94		0x219d
 		>;
 	};
 
-	pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
+	pinctrl_gpio_switch0: pinctrl-gpio-switch0grp {
 		fsl,pins = <
 			VF610_PAD_PTB28__GPIO_98		0x219d
 		>;
@@ -310,7 +310,7 @@
 		>;
 	};
 
-	pinctrl_leds_debug: pinctrl-leds-debug {
+	pinctrl_leds_debug: pinctrl-leds-debuggrp {
 		fsl,pins = <
 			VF610_PAD_PTD3__GPIO_82			0x31c2
 		>;
diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts
index fe600ab2e4bd..344cc2b4d0ad 100644
--- a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts
@@ -137,7 +137,7 @@
 		suppress-preamble;
 		status = "okay";
 
-		switch0: switch0@0 {
+		switch0: ethernet-switch@0 {
 			compatible = "marvell,mv88e6190";
 			pinctrl-0 = <&pinctrl_gpio_switch0>;
 			pinctrl-names = "default";
@@ -148,13 +148,13 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
-			ports {
+			ethernet-ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				port@0 {
+				ethernet-port@0 {
 					reg = <0>;
-					label = "cpu";
+					phy-mode = "rmii";
 					ethernet = <&fec1>;
 
 					fixed-link {
@@ -163,32 +163,32 @@
 					};
 				};
 
-				port@1 {
+				ethernet-port@1 {
 					reg = <1>;
 					label = "eth_cu_1000_1";
 				};
 
-				port@2 {
+				ethernet-port@2 {
 					reg = <2>;
 					label = "eth_cu_1000_2";
 				};
 
-				port@3 {
+				ethernet-port@3 {
 					reg = <3>;
 					label = "eth_cu_1000_3";
 				};
 
-				port@4 {
+				ethernet-port@4 {
 					reg = <4>;
 					label = "eth_cu_1000_4";
 				};
 
-				port@5 {
+				ethernet-port@5 {
 					reg = <5>;
 					label = "eth_cu_1000_5";
 				};
 
-				port@6 {
+				ethernet-port@6 {
 					reg = <6>;
 					label = "eth_cu_1000_6";
 				};
@@ -254,7 +254,7 @@
 	pinctrl-0 = <&pinctrl_uart1>;
 	status = "okay";
 
-	rave-sp {
+	mcu {
 		compatible = "zii,rave-sp-rdu2";
 		current-speed = <1000000>;
 		#address-cells = <1>;
@@ -330,7 +330,7 @@
 		>;
 	};
 
-	pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
+	pinctrl_gpio_switch0: pinctrl-gpio-switch0grp {
 		fsl,pins = <
 			VF610_PAD_PTB28__GPIO_98		0x219d
 		>;
@@ -350,7 +350,7 @@
 		>;
 	};
 
-	pinctrl_leds_debug: pinctrl-leds-debug {
+	pinctrl_leds_debug: pinctrl-leds-debuggrp {
 		fsl,pins = <
 			VF610_PAD_PTD3__GPIO_82			0x31c2
 		>;
diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/nxp/vf/vf610.dtsi
index 956182d08e74..2fba923821d0 100644
--- a/arch/arm/boot/dts/vf610.dtsi
+++ b/arch/arm/boot/dts/nxp/vf/vf610.dtsi
@@ -2,7 +2,6 @@
 //
 // Copyright 2013 Freescale Semiconductor, Inc.
 
-
 #include "vf500.dtsi"
 
 &a5_cpu {
diff --git a/arch/arm/boot/dts/vf610m4-colibri.dts b/arch/arm/boot/dts/nxp/vf/vf610m4-colibri.dts
index 2c2db47af441..86d32f54c250 100644
--- a/arch/arm/boot/dts/vf610m4-colibri.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610m4-colibri.dts
@@ -50,14 +50,12 @@
 };
 
 &iomuxc {
-	vf610-colibri {
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				VF610_PAD_PTD0__UART2_TX		0x21a2
-				VF610_PAD_PTD1__UART2_RX		0x21a1
-				VF610_PAD_PTD2__UART2_RTS		0x21a2
-				VF610_PAD_PTD3__UART2_CTS		0x21a1
-			>;
-		};
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			VF610_PAD_PTD0__UART2_TX		0x21a2
+			VF610_PAD_PTD1__UART2_RX		0x21a1
+			VF610_PAD_PTD2__UART2_RTS		0x21a2
+			VF610_PAD_PTD3__UART2_CTS		0x21a1
+		>;
 	};
 };
diff --git a/arch/arm/boot/dts/vf610m4-cosmic.dts b/arch/arm/boot/dts/nxp/vf/vf610m4-cosmic.dts
index f7474c11aabd..454b484368cb 100644
--- a/arch/arm/boot/dts/vf610m4-cosmic.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610m4-cosmic.dts
@@ -79,12 +79,10 @@
 };
 
 &iomuxc {
-	vf610-cosmic {
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				VF610_PAD_PTA20__UART3_TX		0x21a2
-				VF610_PAD_PTA21__UART3_RX		0x21a1
-			>;
-		};
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			VF610_PAD_PTA20__UART3_TX		0x21a2
+			VF610_PAD_PTA21__UART3_RX		0x21a1
+		>;
 	};
 };
diff --git a/arch/arm/boot/dts/vf610m4.dtsi b/arch/arm/boot/dts/nxp/vf/vf610m4.dtsi
index 76bbfd5e32b6..648d219e1d0e 100644
--- a/arch/arm/boot/dts/vf610m4.dtsi
+++ b/arch/arm/boot/dts/nxp/vf/vf610m4.dtsi
@@ -42,7 +42,7 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include "armv7-m.dtsi"
+#include "../../armv7-m.dtsi"
 #include "vfxxx.dtsi"
 
 / {
@@ -55,3 +55,7 @@
 &mscm_ir {
 	interrupt-parent = <&nvic>;
 };
+
+&nvic {
+	arm,num-irq-priority-bits = <4>;
+};
diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi
index d53f9c9db8bf..568d81807c81 100644
--- a/arch/arm/boot/dts/vfxxx.dtsi
+++ b/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi
@@ -111,8 +111,7 @@
 				interrupts = <61 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_UART0>;
 				clock-names = "ipg";
-				dmas = <&edma0 0 2>,
-					<&edma0 0 3>;
+				dmas = <&edma0 0 2>, <&edma0 0 3>;
 				dma-names = "rx","tx";
 				status = "disabled";
 			};
@@ -123,8 +122,7 @@
 				interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_UART1>;
 				clock-names = "ipg";
-				dmas = <&edma0 0 4>,
-					<&edma0 0 5>;
+				dmas = <&edma0 0 4>, <&edma0 0 5>;
 				dma-names = "rx","tx";
 				status = "disabled";
 			};
@@ -135,8 +133,7 @@
 				interrupts = <63 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_UART2>;
 				clock-names = "ipg";
-				dmas = <&edma0 0 6>,
-					<&edma0 0 7>;
+				dmas = <&edma0 0 6>, <&edma0 0 7>;
 				dma-names = "rx","tx";
 				status = "disabled";
 			};
@@ -147,8 +144,7 @@
 				interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_UART3>;
 				clock-names = "ipg";
-				dmas = <&edma0 0 8>,
-					<&edma0 0 9>;
+				dmas = <&edma0 0 8>, <&edma0 0 9>;
 				dma-names = "rx","tx";
 				status = "disabled";
 			};
@@ -162,9 +158,8 @@
 				clocks = <&clks VF610_CLK_DSPI0>;
 				clock-names = "dspi";
 				spi-num-chipselects = <6>;
-				dmas = <&edma1 1 12>,
-					<&edma1 1 13>;
-				dma-names = "rx", "tx";
+				dmas = <&edma1 1 13>, <&edma1 1 12>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -177,9 +172,8 @@
 				clocks = <&clks VF610_CLK_DSPI1>;
 				clock-names = "dspi";
 				spi-num-chipselects = <4>;
-				dmas = <&edma1 1 14>,
-					<&edma1 1 15>;
-				dma-names = "rx", "tx";
+				dmas = <&edma1 1 15>, <&edma1 1 14>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -191,9 +185,8 @@
 					<&clks VF610_CLK_SAI0_DIV>,
 					<&clks 0>, <&clks 0>;
 				clock-names = "bus", "mclk1", "mclk2", "mclk3";
-				dma-names = "tx", "rx";
-				dmas = <&edma0 0 17>,
-					<&edma0 0 16>;
+				dma-names = "rx", "tx";
+				dmas = <&edma0 0 16>, <&edma0 0 17>;
 				status = "disabled";
 			};
 
@@ -205,9 +198,8 @@
 					<&clks VF610_CLK_SAI1_DIV>,
 					<&clks 0>, <&clks 0>;
 				clock-names = "bus", "mclk1", "mclk2", "mclk3";
-				dma-names = "tx", "rx";
-				dmas = <&edma0 0 19>,
-					<&edma0 0 18>;
+				dma-names = "rx", "tx";
+				dmas = <&edma0 0 18>, <&edma0 0 19>;
 				status = "disabled";
 			};
 
@@ -219,9 +211,8 @@
 					<&clks VF610_CLK_SAI2_DIV>,
 					<&clks 0>, <&clks 0>;
 				clock-names = "bus", "mclk1", "mclk2", "mclk3";
-				dma-names = "tx", "rx";
-				dmas = <&edma0 0 21>,
-					<&edma0 0 20>;
+				dma-names = "rx", "tx";
+				dmas = <&edma0 0 20>, <&edma0 0 21>;
 				status = "disabled";
 			};
 
@@ -233,9 +224,8 @@
 					<&clks VF610_CLK_SAI3_DIV>,
 					<&clks 0>, <&clks 0>;
 				clock-names = "bus", "mclk1", "mclk2", "mclk3";
-				dma-names = "tx", "rx";
-				dmas = <&edma0 1 9>,
-					<&edma0 1 8>;
+				dma-names = "rx", "tx";
+				dmas = <&edma0 1 8>, <&edma0 1 9>;
 				status = "disabled";
 			};
 
@@ -298,7 +288,6 @@
 				reg = <0x4003e000 0x1000>;
 				interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_WDT>;
-				clock-names = "wdog";
 				status = "disabled";
 			};
 
@@ -315,7 +304,7 @@
 				status = "disabled";
 			};
 
-			iomuxc: iomuxc@40048000 {
+			iomuxc: pinctrl@40048000 {
 				compatible = "fsl,vf610-iomuxc";
 				reg = <0x40048000 0x1000>;
 			};
@@ -329,6 +318,7 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				gpio-ranges = <&iomuxc 0 0 32>;
+				ngpios = <32>;
 			};
 
 			gpio1: gpio@4004a000 {
@@ -340,6 +330,7 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				gpio-ranges = <&iomuxc 0 32 32>;
+				ngpios = <32>;
 			};
 
 			gpio2: gpio@4004b000 {
@@ -351,6 +342,7 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				gpio-ranges = <&iomuxc 0 64 32>;
+				ngpios = <32>;
 			};
 
 			gpio3: gpio@4004c000 {
@@ -362,6 +354,7 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				gpio-ranges = <&iomuxc 0 96 32>;
+				ngpios = <32>;
 			};
 
 			gpio4: gpio@4004d000 {
@@ -373,6 +366,7 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				gpio-ranges = <&iomuxc 0 128 7>;
+				ngpios = <7>;
 			};
 
 			anatop: anatop@40050000 {
@@ -431,8 +425,7 @@
 				interrupts = <72 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_I2C1>;
 				clock-names = "ipg";
-				dmas = <&edma0 0 52>,
-					<&edma0 0 53>;
+				dmas = <&edma0 0 52>, <&edma0 0 53>;
 				dma-names = "rx","tx";
 				status = "disabled";
 			};
@@ -541,9 +534,8 @@
 				clocks = <&clks VF610_CLK_DSPI2>;
 				clock-names = "dspi";
 				spi-num-chipselects = <2>;
-				dmas = <&edma1 0 10>,
-					<&edma1 0 11>;
-				dma-names = "rx", "tx";
+				dmas = <&edma1 0 11>, <&edma1 0 10>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -556,9 +548,8 @@
 				clocks = <&clks VF610_CLK_DSPI3>;
 				clock-names = "dspi";
 				spi-num-chipselects = <2>;
-				dmas = <&edma1 0 12>,
-					<&edma1 0 13>;
-				dma-names = "rx", "tx";
+				dmas = <&edma1 0 13>, <&edma1 0 12>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -574,7 +565,7 @@
 							<20000000>;
 			};
 
-			esdhc0: esdhc@400b1000 {
+			esdhc0: mmc@400b1000 {
 				compatible = "fsl,imx53-esdhc";
 				reg = <0x400b1000 0x1000>;
 				interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
@@ -585,7 +576,7 @@
 				status = "disabled";
 			};
 
-			esdhc1: esdhc@400b2000 {
+			esdhc1: mmc@400b2000 {
 				compatible = "fsl,imx53-esdhc";
 				reg = <0x400b2000 0x1000>;
 				interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
@@ -617,7 +608,7 @@
 
 			ftm: ftm@400b8000 {
 				compatible = "fsl,ftm-timer";
-				reg = <0x400b8000 0x1000 0x400b9000 0x1000>;
+				reg = <0x400b8000 0x1000>, <0x400b9000 0x1000>;
 				interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
 				clock-names = "ftm-evt", "ftm-src",
 					"ftm-evt-counter-en", "ftm-src-counter-en";
@@ -691,7 +682,7 @@
 				status = "disabled";
 			};
 
-			nfc: nand@400e0000 {
+			nfc: nand-controller@400e0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,vf610-nfc";
@@ -724,8 +715,7 @@
 				interrupts = <74 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_I2C3>;
 				clock-names = "ipg";
-				dmas = <&edma0 1 38>,
-					<&edma0 1 39>;
+				dmas = <&edma0 1 38>, <&edma0 1 39>;
 				dma-names = "rx","tx";
 				status = "disabled";
 			};
@@ -739,13 +729,13 @@
 				clocks = <&clks VF610_CLK_CAAM>;
 				clock-names = "ipg";
 
-				sec_jr0: jr0@1000 {
+				sec_jr0: jr@1000 {
 					compatible = "fsl,sec-v4.0-job-ring";
 					reg = <0x1000 0x1000>;
 					interrupts = <102 IRQ_TYPE_LEVEL_HIGH>;
 				};
 
-				sec_jr1: jr1@2000 {
+				sec_jr1: jr@2000 {
 					compatible = "fsl,sec-v4.0-job-ring";
 					reg = <0x2000 0x1000>;
 					interrupts = <102 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/omap3-cpu-thermal.dtsi b/arch/arm/boot/dts/omap3-cpu-thermal.dtsi
deleted file mode 100644
index 1ed837859374..000000000000
--- a/arch/arm/boot/dts/omap3-cpu-thermal.dtsi
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Device Tree Source for OMAP3 SoC CPU thermal
- *
- * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <dt-bindings/thermal/thermal.h>
-
-cpu_thermal: cpu_thermal {
-	polling-delay-passive = <250>; /* milliseconds */
-	polling-delay = <1000>; /* milliseconds */
-	coefficients = <0 20000>;
-
-			/* sensor       ID */
-	thermal-sensors = <&bandgap     0>;
-
-	cpu_trips: trips {
-		cpu_alert0: cpu_alert {
-			temperature = <80000>; /* millicelsius */
-			hysteresis = <2000>; /* millicelsius */
-			type = "passive";
-		};
-		cpu_crit: cpu_crit {
-			temperature = <90000>; /* millicelsius */
-			hysteresis = <2000>; /* millicelsius */
-			type = "critical";
-		};
-	};
-
-	cpu_cooling_maps: cooling-maps {
-		map0 {
-			trip = <&cpu_alert0>;
-			cooling-device =
-				<&cpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts
deleted file mode 100644
index c2995a280729..000000000000
--- a/arch/arm/boot/dts/omap3-devkit8000.dts
+++ /dev/null
@@ -1,49 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Author: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
- */
-/dts-v1/;
-
-#include "omap3-devkit8000-common.dtsi"
-/ {
-	model = "TimLL OMAP3 Devkit8000";
-	compatible = "timll,omap3-devkit8000", "ti,omap3430", "ti,omap3";
-
-	aliases {
-		display1 = &dvi0;
-		display2 = &tv0;
-	};
-};
-
-/* Unusable as clocksource because of unreliable oscillator */
-&counter32k {
-	status = "disabled";
-};
-
-/* Unusable as clockevent because if unreliable oscillator, allow to idle */
-&timer1_target {
-	/delete-property/ti,no-reset-on-init;
-	/delete-property/ti,no-idle;
-	timer@0 {
-		/delete-property/ti,timer-alwon;
-	};
-};
-
-/* Preferred always-on timer for clocksource */
-&timer12_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		/* Always clocked by secure_32k_fck */
-	};
-};
-
-/* Preferred timer for clockevent */
-&timer2_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		assigned-clocks = <&gpt2_fck>;
-		assigned-clock-parents = <&sys_ck>;
-	};
-};
diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts
deleted file mode 100644
index 0482676d1830..000000000000
--- a/arch/arm/boot/dts/omap3-zoom3.dts
+++ /dev/null
@@ -1,231 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
- */
-/dts-v1/;
-
-#include "omap36xx.dtsi"
-#include "omap-zoom-common.dtsi"
-
-/ {
-	model = "TI Zoom3";
-	compatible = "ti,omap3-zoom3", "ti,omap3630", "ti,omap36xx", "ti,omap3";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vcc>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>; /* 512 MB */
-	};
-
-	vddvario: regulator-vddvario {
-		  compatible = "regulator-fixed";
-		  regulator-name = "vddvario";
-		  regulator-always-on;
-	};
-
-	vdd33a: regulator-vdd33a {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd33a";
-		regulator-always-on;
-	};
-
-	wl12xx_vmmc: wl12xx_vmmc {
-		pinctrl-names = "default";
-		pinctrl-0 = <&wl12xx_gpio>;
-		compatible = "regulator-fixed";
-		regulator-name = "vwl1271";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>;	/* gpio101 */
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-};
-
-&omap3_pmx_core {
-	/* REVISIT: twl gpio0 is mmc0_cd */
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
-			OMAP3_CORE1_IOPAD(0x2146, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
-			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
-			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
-			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
-			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
-		>;
-	};
-
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
-			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
-			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat0.sdmmc2_dat0 */
-			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat1.sdmmc2_dat1 */
-			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat2.sdmmc2_dat2 */
-			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat3.sdmmc2_dat3 */
-			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat4.sdmmc2_dat4 */
-			OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat5.sdmmc2_dat5 */
-			OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat6.sdmmc2_dat6 */
-			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat7.sdmmc2_dat7 */
-		>;
-	};
-
-	mmc3_pins: pinmux_mmc3_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE4)	/* mcbsp1_clkx.gpio_162 WLAN IRQ */
-			OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT_PULLUP | MUX_MODE3)	/* mcspi1_cs1.sdmmc3_cmd */
-		>;
-	};
-
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-                        OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0)		/* uart1_cts.uart1_cts */
-                        OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0)		/* uart1_rts.uart1_rts */
-                        OMAP3_CORE1_IOPAD(0x2182, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
-                        OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0)		/* uart1_tx.uart1_tx */
-		>;
-	};
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-                        OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
-                        OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
-                        OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)		/* uart2_rx.uart2_rx */
-                        OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-                        OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
-                        OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
-                        OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)		/* uart3_rx_irrx.uart3_rx_irrx */
-                        OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
-		>;
-	};
-
-	/* wl12xx GPIO output for WLAN_EN */
-	wl12xx_gpio: pinmux_wl12xx_gpio {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x211a, PIN_OUTPUT| MUX_MODE4)		/* cam_d2.gpio_101 */
-		>;
-	};
-};
-
-&omap3_pmx_core2 {
-	mmc3_2_pins: pinmux_mmc3_2_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_clk.sdmmc3_clk */
-			OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d4.sdmmc3_dat0 */
-			OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d5.sdmmc3_dat1 */
-			OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d6.sdmmc3_dat2 */
-			OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d3.sdmmc3_dat3 */
-		>;
-	};
-};
-
-&omap3_pmx_wkup {
-	wlan_host_wkup: pinmux_wlan_host_wkup_pins {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a1a, PIN_INPUT_PULLUP | MUX_MODE4)	/* sys_clkout1.gpio_10 WLAN_HOST_WKUP */
-		>;
-	};
-};
-
-&i2c1 {
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-	};
-};
-
-#include "twl4030.dtsi"
-
-&i2c2 {
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	clock-frequency = <400000>;
-
-	/*
-	 * TVP5146 Video decoder-in for analog input support.
-	 */
-	tvp5146@5c {
-		compatible = "ti,tvp5146m2";
-		reg = <0x5c>;
-	};
-};
-
-&twl_gpio {
-	ti,use-leds;
-};
-
-&mmc1 {
-	vmmc-supply = <&vmmc1>;
-	vqmmc-supply = <&vsim>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-};
-/*
-&mmc2 {
-	vmmc-supply = <&vmmc2>;
-	ti,non-removable;
-	bus-width = <8>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-};
-*/
-&mmc3 {
-	vmmc-supply = <&wl12xx_vmmc>;
-	non-removable;
-	bus-width = <4>;
-	cap-power-off-card;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc3_pins &mmc3_2_pins>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1271";
-		reg = <2>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <2 IRQ_TYPE_EDGE_RISING>; /* gpio 162 */
-		ref-clock-frequency = <26000000>;
-	};
-};
-
-&uart1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart1_pins>;
-};
-
-&uart2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart2_pins>;
-};
-
-&uart3 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart3_pins>;
-};
-
-&uart4 {
-       status = "disabled";
-};
-
-&usb_otg_hs {
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	mode = <3>;
-	power = <50>;
-};
diff --git a/arch/arm/boot/dts/omap3430es1-clocks.dtsi b/arch/arm/boot/dts/omap3430es1-clocks.dtsi
deleted file mode 100644
index 2ec3628d3315..000000000000
--- a/arch/arm/boot/dts/omap3430es1-clocks.dtsi
+++ /dev/null
@@ -1,205 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for OMAP3430 ES1 clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- */
-&cm_clocks {
-	gfx_l3_ck: gfx_l3_ck@b10 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&l3_ick>;
-		reg = <0x0b10>;
-		ti,bit-shift = <0>;
-	};
-
-	gfx_l3_fck: gfx_l3_fck@b40 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&l3_ick>;
-		ti,max-div = <7>;
-		reg = <0x0b40>;
-		ti,index-starts-at-one;
-	};
-
-	gfx_l3_ick: gfx_l3_ick {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&gfx_l3_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	gfx_cg1_ck: gfx_cg1_ck@b00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&gfx_l3_fck>;
-		reg = <0x0b00>;
-		ti,bit-shift = <1>;
-	};
-
-	gfx_cg2_ck: gfx_cg2_ck@b00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&gfx_l3_fck>;
-		reg = <0x0b00>;
-		ti,bit-shift = <2>;
-	};
-
-	d2d_26m_fck: d2d_26m_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&sys_ck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <3>;
-	};
-
-	fshostusb_fck: fshostusb_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_48m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <5>;
-	};
-
-	ssi_ssr_gate_fck_3430es1: ssi_ssr_gate_fck_3430es1@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&corex2_fck>;
-		ti,bit-shift = <0>;
-		reg = <0x0a00>;
-	};
-
-	ssi_ssr_div_fck_3430es1: ssi_ssr_div_fck_3430es1@a40 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-divider-clock";
-		clocks = <&corex2_fck>;
-		ti,bit-shift = <8>;
-		reg = <0x0a40>;
-		ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
-	};
-
-	ssi_ssr_fck: ssi_ssr_fck_3430es1 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&ssi_ssr_gate_fck_3430es1>, <&ssi_ssr_div_fck_3430es1>;
-	};
-
-	ssi_sst_fck: ssi_sst_fck_3430es1 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&ssi_ssr_fck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	hsotgusb_ick_3430es1: hsotgusb_ick_3430es1@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-no-wait-interface-clock";
-		clocks = <&core_l3_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <4>;
-	};
-
-	fac_ick: fac_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <8>;
-	};
-
-	ssi_l4_ick: ssi_l4_ick {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&l4_ick>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	ssi_ick: ssi_ick_3430es1@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-no-wait-interface-clock";
-		clocks = <&ssi_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <0>;
-	};
-
-	usb_l4_gate_ick: usb_l4_gate_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-interface-clock";
-		clocks = <&l4_ick>;
-		ti,bit-shift = <5>;
-		reg = <0x0a10>;
-	};
-
-	usb_l4_div_ick: usb_l4_div_ick@a40 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-divider-clock";
-		clocks = <&l4_ick>;
-		ti,bit-shift = <4>;
-		ti,max-div = <1>;
-		reg = <0x0a40>;
-		ti,index-starts-at-one;
-	};
-
-	usb_l4_ick: usb_l4_ick {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>;
-	};
-
-	dss1_alwon_fck: dss1_alwon_fck_3430es1@e00 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll4_m4x2_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0e00>;
-		ti,set-rate-parent;
-	};
-
-	dss_ick: dss_ick_3430es1@e10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-no-wait-interface-clock";
-		clocks = <&l4_ick>;
-		reg = <0x0e10>;
-		ti,bit-shift = <0>;
-	};
-};
-
-&cm_clockdomains {
-	core_l3_clkdm: core_l3_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&sdrc_ick>, <&hsotgusb_ick_3430es1>;
-	};
-
-	gfx_3430es1_clkdm: gfx_3430es1_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&gfx_l3_ck>, <&gfx_cg1_ck>, <&gfx_cg2_ck>;
-	};
-
-	dss_clkdm: dss_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dss_tv_fck>, <&dss_96m_fck>, <&dss2_alwon_fck>,
-			 <&dss1_alwon_fck>, <&dss_ick>;
-	};
-
-	d2d_clkdm: d2d_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&d2d_26m_fck>;
-	};
-
-	core_l4_clkdm: core_l4_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
-			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
-			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
-			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
-			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
-			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
-			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
-			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
-			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
-			 <&fshostusb_fck>, <&fac_ick>, <&ssi_ick>;
-	};
-};
diff --git a/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi b/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi
deleted file mode 100644
index 21079cdf2663..000000000000
--- a/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi
+++ /dev/null
@@ -1,265 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for OMAP34XX/OMAP36XX clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- */
-&cm_clocks {
-	security_l4_ick2: security_l4_ick2 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&l4_ick>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	aes1_ick: aes1_ick@a14 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&security_l4_ick2>;
-		ti,bit-shift = <3>;
-		reg = <0x0a14>;
-	};
-
-	rng_ick: rng_ick@a14 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&security_l4_ick2>;
-		reg = <0x0a14>;
-		ti,bit-shift = <2>;
-	};
-
-	sha11_ick: sha11_ick@a14 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&security_l4_ick2>;
-		reg = <0x0a14>;
-		ti,bit-shift = <1>;
-	};
-
-	des1_ick: des1_ick@a14 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&security_l4_ick2>;
-		reg = <0x0a14>;
-		ti,bit-shift = <0>;
-	};
-
-	cam_mclk: cam_mclk@f00 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll4_m5x2_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0f00>;
-		ti,set-rate-parent;
-	};
-
-	cam_ick: cam_ick@f10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-no-wait-interface-clock";
-		clocks = <&l4_ick>;
-		reg = <0x0f10>;
-		ti,bit-shift = <0>;
-	};
-
-	csi2_96m_fck: csi2_96m_fck@f00 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&core_96m_fck>;
-		reg = <0x0f00>;
-		ti,bit-shift = <1>;
-	};
-
-	security_l3_ick: security_l3_ick {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&l3_ick>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	pka_ick: pka_ick@a14 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&security_l3_ick>;
-		reg = <0x0a14>;
-		ti,bit-shift = <4>;
-	};
-
-	icr_ick: icr_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <29>;
-	};
-
-	des2_ick: des2_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <26>;
-	};
-
-	mspro_ick: mspro_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <23>;
-	};
-
-	mailboxes_ick: mailboxes_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <7>;
-	};
-
-	ssi_l4_ick: ssi_l4_ick {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&l4_ick>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	sr1_fck: sr1_fck@c00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&sys_ck>;
-		reg = <0x0c00>;
-		ti,bit-shift = <6>;
-	};
-
-	sr2_fck: sr2_fck@c00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&sys_ck>;
-		reg = <0x0c00>;
-		ti,bit-shift = <7>;
-	};
-
-	sr_l4_ick: sr_l4_ick {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&l4_ick>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll2_fck: dpll2_fck@40 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&core_ck>;
-		ti,bit-shift = <19>;
-		ti,max-div = <7>;
-		reg = <0x0040>;
-		ti,index-starts-at-one;
-	};
-
-	dpll2_ck: dpll2_ck@4 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-dpll-clock";
-		clocks = <&sys_ck>, <&dpll2_fck>;
-		reg = <0x0004>, <0x0024>, <0x0040>, <0x0034>;
-		ti,low-power-stop;
-		ti,lock;
-		ti,low-power-bypass;
-	};
-
-	dpll2_m2_ck: dpll2_m2_ck@44 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll2_ck>;
-		ti,max-div = <31>;
-		reg = <0x0044>;
-		ti,index-starts-at-one;
-	};
-
-	iva2_ck: iva2_ck@0 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&dpll2_m2_ck>;
-		reg = <0x0000>;
-		ti,bit-shift = <0>;
-	};
-
-	modem_fck: modem_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&sys_ck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <31>;
-	};
-
-	sad2d_ick: sad2d_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l3_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <3>;
-	};
-
-	mad2d_ick: mad2d_ick@a18 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l3_ick>;
-		reg = <0x0a18>;
-		ti,bit-shift = <3>;
-	};
-
-	mspro_fck: mspro_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_96m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <23>;
-	};
-};
-
-&cm_clockdomains {
-	cam_clkdm: cam_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&cam_ick>, <&csi2_96m_fck>;
-	};
-
-	iva2_clkdm: iva2_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&iva2_ck>;
-	};
-
-	dpll2_clkdm: dpll2_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dpll2_ck>;
-	};
-
-	wkup_clkdm: wkup_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&gpio1_dbck>, <&wdt2_fck>, <&wdt2_ick>, <&wdt1_ick>,
-			 <&gpio1_ick>, <&omap_32ksync_ick>, <&gpt12_ick>,
-			 <&gpt1_ick>, <&sr1_fck>, <&sr2_fck>;
-	};
-
-	d2d_clkdm: d2d_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&modem_fck>, <&sad2d_ick>, <&mad2d_ick>;
-	};
-
-	core_l4_clkdm: core_l4_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
-			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
-			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
-			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
-			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
-			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
-			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
-			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
-			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>, <&icr_ick>,
-			 <&des2_ick>, <&mspro_ick>, <&mailboxes_ick>,
-			 <&rng_ick>, <&mspro_fck>;
-	};
-};
diff --git a/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi b/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi
deleted file mode 100644
index 945537aee3ca..000000000000
--- a/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi
+++ /dev/null
@@ -1,195 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for OMAP34xx/OMAP36xx clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- */
-&cm_clocks {
-	ssi_ssr_gate_fck_3430es2: ssi_ssr_gate_fck_3430es2@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&corex2_fck>;
-		ti,bit-shift = <0>;
-		reg = <0x0a00>;
-	};
-
-	ssi_ssr_div_fck_3430es2: ssi_ssr_div_fck_3430es2@a40 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-divider-clock";
-		clocks = <&corex2_fck>;
-		ti,bit-shift = <8>;
-		reg = <0x0a40>;
-		ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
-	};
-
-	ssi_ssr_fck: ssi_ssr_fck_3430es2 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&ssi_ssr_gate_fck_3430es2>, <&ssi_ssr_div_fck_3430es2>;
-	};
-
-	ssi_sst_fck: ssi_sst_fck_3430es2 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&ssi_ssr_fck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	hsotgusb_ick_3430es2: hsotgusb_ick_3430es2@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-hsotgusb-interface-clock";
-		clocks = <&core_l3_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <4>;
-	};
-
-	ssi_l4_ick: ssi_l4_ick {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&l4_ick>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	ssi_ick: ssi_ick_3430es2@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-ssi-interface-clock";
-		clocks = <&ssi_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <0>;
-	};
-
-	usim_gate_fck: usim_gate_fck@c00 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&omap_96m_fck>;
-		ti,bit-shift = <9>;
-		reg = <0x0c00>;
-	};
-
-	sys_d2_ck: sys_d2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	omap_96m_d2_fck: omap_96m_d2_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_96m_fck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	omap_96m_d4_fck: omap_96m_d4_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_96m_fck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	omap_96m_d8_fck: omap_96m_d8_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_96m_fck>;
-		clock-mult = <1>;
-		clock-div = <8>;
-	};
-
-	omap_96m_d10_fck: omap_96m_d10_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_96m_fck>;
-		clock-mult = <1>;
-		clock-div = <10>;
-	};
-
-	dpll5_m2_d4_ck: dpll5_m2_d4_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll5_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	dpll5_m2_d8_ck: dpll5_m2_d8_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll5_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <8>;
-	};
-
-	dpll5_m2_d16_ck: dpll5_m2_d16_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll5_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <16>;
-	};
-
-	dpll5_m2_d20_ck: dpll5_m2_d20_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll5_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <20>;
-	};
-
-	usim_mux_fck: usim_mux_fck@c40 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&sys_ck>, <&sys_d2_ck>, <&omap_96m_d2_fck>, <&omap_96m_d4_fck>, <&omap_96m_d8_fck>, <&omap_96m_d10_fck>, <&dpll5_m2_d4_ck>, <&dpll5_m2_d8_ck>, <&dpll5_m2_d16_ck>, <&dpll5_m2_d20_ck>;
-		ti,bit-shift = <3>;
-		reg = <0x0c40>;
-		ti,index-starts-at-one;
-	};
-
-	usim_fck: usim_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&usim_gate_fck>, <&usim_mux_fck>;
-	};
-
-	usim_ick: usim_ick@c10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&wkup_l4_ick>;
-		reg = <0x0c10>;
-		ti,bit-shift = <9>;
-	};
-};
-
-&cm_clockdomains {
-	core_l3_clkdm: core_l3_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&sdrc_ick>, <&hsotgusb_ick_3430es2>;
-	};
-
-	wkup_clkdm: wkup_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&gpio1_dbck>, <&wdt2_fck>, <&wdt2_ick>, <&wdt1_ick>,
-			 <&gpio1_ick>, <&omap_32ksync_ick>, <&gpt12_ick>,
-			 <&gpt1_ick>, <&usim_ick>;
-	};
-
-	core_l4_clkdm: core_l4_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&cpefuse_fck>, <&ts_fck>, <&usbtll_fck>,
-			 <&usbtll_ick>, <&mmchs3_ick>, <&mmchs3_fck>,
-			 <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
-			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
-			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
-			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
-			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
-			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
-			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
-			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
-			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
-			 <&ssi_ick>;
-	};
-};
diff --git a/arch/arm/boot/dts/omap3xxx-clocks.dtsi b/arch/arm/boot/dts/omap3xxx-clocks.dtsi
deleted file mode 100644
index 0656c32439d2..000000000000
--- a/arch/arm/boot/dts/omap3xxx-clocks.dtsi
+++ /dev/null
@@ -1,1662 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for OMAP3 clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- */
-&prm_clocks {
-	virt_16_8m_ck: virt_16_8m_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <16800000>;
-	};
-
-	osc_sys_ck: osc_sys_ck@d40 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&virt_12m_ck>, <&virt_13m_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_38_4m_ck>, <&virt_16_8m_ck>;
-		reg = <0x0d40>;
-	};
-
-	sys_ck: sys_ck@1270 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&osc_sys_ck>;
-		ti,bit-shift = <6>;
-		ti,max-div = <3>;
-		reg = <0x1270>;
-		ti,index-starts-at-one;
-	};
-
-	sys_clkout1: sys_clkout1@d70 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&osc_sys_ck>;
-		reg = <0x0d70>;
-		ti,bit-shift = <7>;
-	};
-
-	dpll3_x2_ck: dpll3_x2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll3_ck>;
-		clock-mult = <2>;
-		clock-div = <1>;
-	};
-
-	dpll3_m2x2_ck: dpll3_m2x2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll3_m2_ck>;
-		clock-mult = <2>;
-		clock-div = <1>;
-	};
-
-	dpll4_x2_ck: dpll4_x2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll4_ck>;
-		clock-mult = <2>;
-		clock-div = <1>;
-	};
-
-	corex2_fck: corex2_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll3_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	wkup_l4_ick: wkup_l4_ick {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-};
-
-&scm_clocks {
-	mcbsp5_mux_fck: mcbsp5_mux_fck@68 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&core_96m_fck>, <&mcbsp_clks>;
-		ti,bit-shift = <4>;
-		reg = <0x68>;
-	};
-
-	mcbsp5_fck: mcbsp5_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&mcbsp5_gate_fck>, <&mcbsp5_mux_fck>;
-	};
-
-	mcbsp1_mux_fck: mcbsp1_mux_fck@4 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&core_96m_fck>, <&mcbsp_clks>;
-		ti,bit-shift = <2>;
-		reg = <0x04>;
-	};
-
-	mcbsp1_fck: mcbsp1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&mcbsp1_gate_fck>, <&mcbsp1_mux_fck>;
-	};
-
-	mcbsp2_mux_fck: mcbsp2_mux_fck@4 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&per_96m_fck>, <&mcbsp_clks>;
-		ti,bit-shift = <6>;
-		reg = <0x04>;
-	};
-
-	mcbsp2_fck: mcbsp2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&mcbsp2_gate_fck>, <&mcbsp2_mux_fck>;
-	};
-
-	mcbsp3_mux_fck: mcbsp3_mux_fck@68 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&per_96m_fck>, <&mcbsp_clks>;
-		reg = <0x68>;
-	};
-
-	mcbsp3_fck: mcbsp3_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&mcbsp3_gate_fck>, <&mcbsp3_mux_fck>;
-	};
-
-	mcbsp4_mux_fck: mcbsp4_mux_fck@68 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&per_96m_fck>, <&mcbsp_clks>;
-		ti,bit-shift = <2>;
-		reg = <0x68>;
-	};
-
-	mcbsp4_fck: mcbsp4_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&mcbsp4_gate_fck>, <&mcbsp4_mux_fck>;
-	};
-};
-&cm_clocks {
-	dummy_apb_pclk: dummy_apb_pclk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0x0>;
-	};
-
-	omap_32k_fck: omap_32k_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	virt_12m_ck: virt_12m_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <12000000>;
-	};
-
-	virt_13m_ck: virt_13m_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <13000000>;
-	};
-
-	virt_19200000_ck: virt_19200000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <19200000>;
-	};
-
-	virt_26000000_ck: virt_26000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
-	};
-
-	virt_38_4m_ck: virt_38_4m_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <38400000>;
-	};
-
-	dpll4_ck: dpll4_ck@d00 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-dpll-per-clock";
-		clocks = <&sys_ck>, <&sys_ck>;
-		reg = <0x0d00>, <0x0d20>, <0x0d44>, <0x0d30>;
-	};
-
-	dpll4_m2_ck: dpll4_m2_ck@d48 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll4_ck>;
-		ti,max-div = <63>;
-		reg = <0x0d48>;
-		ti,index-starts-at-one;
-	};
-
-	dpll4_m2x2_mul_ck: dpll4_m2x2_mul_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll4_m2_ck>;
-		clock-mult = <2>;
-		clock-div = <1>;
-	};
-
-	dpll4_m2x2_ck: dpll4_m2x2_ck@d00 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll4_m2x2_mul_ck>;
-		ti,bit-shift = <0x1b>;
-		reg = <0x0d00>;
-		ti,set-bit-to-disable;
-	};
-
-	omap_96m_alwon_fck: omap_96m_alwon_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll4_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll3_ck: dpll3_ck@d00 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-dpll-core-clock";
-		clocks = <&sys_ck>, <&sys_ck>;
-		reg = <0x0d00>, <0x0d20>, <0x0d40>, <0x0d30>;
-	};
-
-	dpll3_m3_ck: dpll3_m3_ck@1140 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll3_ck>;
-		ti,bit-shift = <16>;
-		ti,max-div = <31>;
-		reg = <0x1140>;
-		ti,index-starts-at-one;
-	};
-
-	dpll3_m3x2_mul_ck: dpll3_m3x2_mul_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll3_m3_ck>;
-		clock-mult = <2>;
-		clock-div = <1>;
-	};
-
-	dpll3_m3x2_ck: dpll3_m3x2_ck@d00 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll3_m3x2_mul_ck>;
-		ti,bit-shift = <0xc>;
-		reg = <0x0d00>;
-		ti,set-bit-to-disable;
-	};
-
-	emu_core_alwon_ck: emu_core_alwon_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll3_m3x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	sys_altclk: sys_altclk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0x0>;
-	};
-
-	mcbsp_clks: mcbsp_clks {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0x0>;
-	};
-
-	dpll3_m2_ck: dpll3_m2_ck@d40 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll3_ck>;
-		ti,bit-shift = <27>;
-		ti,max-div = <31>;
-		reg = <0x0d40>;
-		ti,index-starts-at-one;
-	};
-
-	core_ck: core_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll3_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll1_fck: dpll1_fck@940 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&core_ck>;
-		ti,bit-shift = <19>;
-		ti,max-div = <7>;
-		reg = <0x0940>;
-		ti,index-starts-at-one;
-	};
-
-	dpll1_ck: dpll1_ck@904 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-dpll-clock";
-		clocks = <&sys_ck>, <&dpll1_fck>;
-		reg = <0x0904>, <0x0924>, <0x0940>, <0x0934>;
-	};
-
-	dpll1_x2_ck: dpll1_x2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll1_ck>;
-		clock-mult = <2>;
-		clock-div = <1>;
-	};
-
-	dpll1_x2m2_ck: dpll1_x2m2_ck@944 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll1_x2_ck>;
-		ti,max-div = <31>;
-		reg = <0x0944>;
-		ti,index-starts-at-one;
-	};
-
-	cm_96m_fck: cm_96m_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_96m_alwon_fck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	omap_96m_fck: omap_96m_fck@d40 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&cm_96m_fck>, <&sys_ck>;
-		ti,bit-shift = <6>;
-		reg = <0x0d40>;
-	};
-
-	dpll4_m3_ck: dpll4_m3_ck@e40 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll4_ck>;
-		ti,bit-shift = <8>;
-		ti,max-div = <32>;
-		reg = <0x0e40>;
-		ti,index-starts-at-one;
-	};
-
-	dpll4_m3x2_mul_ck: dpll4_m3x2_mul_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll4_m3_ck>;
-		clock-mult = <2>;
-		clock-div = <1>;
-	};
-
-	dpll4_m3x2_ck: dpll4_m3x2_ck@d00 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll4_m3x2_mul_ck>;
-		ti,bit-shift = <0x1c>;
-		reg = <0x0d00>;
-		ti,set-bit-to-disable;
-	};
-
-	omap_54m_fck: omap_54m_fck@d40 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll4_m3x2_ck>, <&sys_altclk>;
-		ti,bit-shift = <5>;
-		reg = <0x0d40>;
-	};
-
-	cm_96m_d2_fck: cm_96m_d2_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&cm_96m_fck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	omap_48m_fck: omap_48m_fck@d40 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&cm_96m_d2_fck>, <&sys_altclk>;
-		ti,bit-shift = <3>;
-		reg = <0x0d40>;
-	};
-
-	omap_12m_fck: omap_12m_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_48m_fck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	dpll4_m4_ck: dpll4_m4_ck@e40 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll4_ck>;
-		ti,max-div = <16>;
-		reg = <0x0e40>;
-		ti,index-starts-at-one;
-	};
-
-	dpll4_m4x2_mul_ck: dpll4_m4x2_mul_ck {
-		#clock-cells = <0>;
-		compatible = "ti,fixed-factor-clock";
-		clocks = <&dpll4_m4_ck>;
-		ti,clock-mult = <2>;
-		ti,clock-div = <1>;
-		ti,set-rate-parent;
-	};
-
-	dpll4_m4x2_ck: dpll4_m4x2_ck@d00 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll4_m4x2_mul_ck>;
-		ti,bit-shift = <0x1d>;
-		reg = <0x0d00>;
-		ti,set-bit-to-disable;
-		ti,set-rate-parent;
-	};
-
-	dpll4_m5_ck: dpll4_m5_ck@f40 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll4_ck>;
-		ti,max-div = <63>;
-		reg = <0x0f40>;
-		ti,index-starts-at-one;
-	};
-
-	dpll4_m5x2_mul_ck: dpll4_m5x2_mul_ck {
-		#clock-cells = <0>;
-		compatible = "ti,fixed-factor-clock";
-		clocks = <&dpll4_m5_ck>;
-		ti,clock-mult = <2>;
-		ti,clock-div = <1>;
-		ti,set-rate-parent;
-	};
-
-	dpll4_m5x2_ck: dpll4_m5x2_ck@d00 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll4_m5x2_mul_ck>;
-		ti,bit-shift = <0x1e>;
-		reg = <0x0d00>;
-		ti,set-bit-to-disable;
-		ti,set-rate-parent;
-	};
-
-	dpll4_m6_ck: dpll4_m6_ck@1140 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll4_ck>;
-		ti,bit-shift = <24>;
-		ti,max-div = <63>;
-		reg = <0x1140>;
-		ti,index-starts-at-one;
-	};
-
-	dpll4_m6x2_mul_ck: dpll4_m6x2_mul_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll4_m6_ck>;
-		clock-mult = <2>;
-		clock-div = <1>;
-	};
-
-	dpll4_m6x2_ck: dpll4_m6x2_ck@d00 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll4_m6x2_mul_ck>;
-		ti,bit-shift = <0x1f>;
-		reg = <0x0d00>;
-		ti,set-bit-to-disable;
-	};
-
-	emu_per_alwon_ck: emu_per_alwon_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll4_m6x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	clkout2_src_gate_ck: clkout2_src_gate_ck@d70 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&core_ck>;
-		ti,bit-shift = <7>;
-		reg = <0x0d70>;
-	};
-
-	clkout2_src_mux_ck: clkout2_src_mux_ck@d70 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&core_ck>, <&sys_ck>, <&cm_96m_fck>, <&omap_54m_fck>;
-		reg = <0x0d70>;
-	};
-
-	clkout2_src_ck: clkout2_src_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&clkout2_src_gate_ck>, <&clkout2_src_mux_ck>;
-	};
-
-	sys_clkout2: sys_clkout2@d70 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&clkout2_src_ck>;
-		ti,bit-shift = <3>;
-		ti,max-div = <64>;
-		reg = <0x0d70>;
-		ti,index-power-of-two;
-	};
-
-	mpu_ck: mpu_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll1_x2m2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	arm_fck: arm_fck@924 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&mpu_ck>;
-		reg = <0x0924>;
-		ti,max-div = <2>;
-	};
-
-	emu_mpu_alwon_ck: emu_mpu_alwon_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&mpu_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l3_ick: l3_ick@a40 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&core_ck>;
-		ti,max-div = <3>;
-		reg = <0x0a40>;
-		ti,index-starts-at-one;
-	};
-
-	l4_ick: l4_ick@a40 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&l3_ick>;
-		ti,bit-shift = <2>;
-		ti,max-div = <3>;
-		reg = <0x0a40>;
-		ti,index-starts-at-one;
-	};
-
-	rm_ick: rm_ick@c40 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&l4_ick>;
-		ti,bit-shift = <1>;
-		ti,max-div = <3>;
-		reg = <0x0c40>;
-		ti,index-starts-at-one;
-	};
-
-	gpt10_gate_fck: gpt10_gate_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <11>;
-		reg = <0x0a00>;
-	};
-
-	gpt10_mux_fck: gpt10_mux_fck@a40 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		ti,bit-shift = <6>;
-		reg = <0x0a40>;
-	};
-
-	gpt10_fck: gpt10_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt10_gate_fck>, <&gpt10_mux_fck>;
-	};
-
-	gpt11_gate_fck: gpt11_gate_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <12>;
-		reg = <0x0a00>;
-	};
-
-	gpt11_mux_fck: gpt11_mux_fck@a40 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		ti,bit-shift = <7>;
-		reg = <0x0a40>;
-	};
-
-	gpt11_fck: gpt11_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt11_gate_fck>, <&gpt11_mux_fck>;
-	};
-
-	core_96m_fck: core_96m_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_96m_fck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	mmchs2_fck: mmchs2_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_96m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <25>;
-	};
-
-	mmchs1_fck: mmchs1_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_96m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <24>;
-	};
-
-	i2c3_fck: i2c3_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_96m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <17>;
-	};
-
-	i2c2_fck: i2c2_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_96m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <16>;
-	};
-
-	i2c1_fck: i2c1_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_96m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <15>;
-	};
-
-	mcbsp5_gate_fck: mcbsp5_gate_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&mcbsp_clks>;
-		ti,bit-shift = <10>;
-		reg = <0x0a00>;
-	};
-
-	mcbsp1_gate_fck: mcbsp1_gate_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&mcbsp_clks>;
-		ti,bit-shift = <9>;
-		reg = <0x0a00>;
-	};
-
-	core_48m_fck: core_48m_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_48m_fck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	mcspi4_fck: mcspi4_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_48m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <21>;
-	};
-
-	mcspi3_fck: mcspi3_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_48m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <20>;
-	};
-
-	mcspi2_fck: mcspi2_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_48m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <19>;
-	};
-
-	mcspi1_fck: mcspi1_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_48m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <18>;
-	};
-
-	uart2_fck: uart2_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_48m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <14>;
-	};
-
-	uart1_fck: uart1_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_48m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <13>;
-	};
-
-	core_12m_fck: core_12m_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_12m_fck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	hdq_fck: hdq_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_12m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <22>;
-	};
-
-	core_l3_ick: core_l3_ick {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&l3_ick>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	sdrc_ick: sdrc_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_l3_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <1>;
-	};
-
-	gpmc_fck: gpmc_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&core_l3_ick>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	core_l4_ick: core_l4_ick {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&l4_ick>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	mmchs2_ick: mmchs2_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <25>;
-	};
-
-	mmchs1_ick: mmchs1_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <24>;
-	};
-
-	hdq_ick: hdq_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <22>;
-	};
-
-	mcspi4_ick: mcspi4_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <21>;
-	};
-
-	mcspi3_ick: mcspi3_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <20>;
-	};
-
-	mcspi2_ick: mcspi2_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <19>;
-	};
-
-	mcspi1_ick: mcspi1_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <18>;
-	};
-
-	i2c3_ick: i2c3_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <17>;
-	};
-
-	i2c2_ick: i2c2_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <16>;
-	};
-
-	i2c1_ick: i2c1_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <15>;
-	};
-
-	uart2_ick: uart2_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <14>;
-	};
-
-	uart1_ick: uart1_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <13>;
-	};
-
-	gpt11_ick: gpt11_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <12>;
-	};
-
-	gpt10_ick: gpt10_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <11>;
-	};
-
-	mcbsp5_ick: mcbsp5_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <10>;
-	};
-
-	mcbsp1_ick: mcbsp1_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <9>;
-	};
-
-	omapctrl_ick: omapctrl_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <6>;
-	};
-
-	dss_tv_fck: dss_tv_fck@e00 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&omap_54m_fck>;
-		reg = <0x0e00>;
-		ti,bit-shift = <2>;
-	};
-
-	dss_96m_fck: dss_96m_fck@e00 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&omap_96m_fck>;
-		reg = <0x0e00>;
-		ti,bit-shift = <2>;
-	};
-
-	dss2_alwon_fck: dss2_alwon_fck@e00 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_ck>;
-		reg = <0x0e00>;
-		ti,bit-shift = <1>;
-	};
-
-	dummy_ck: dummy_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	gpt1_gate_fck: gpt1_gate_fck@c00 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0c00>;
-	};
-
-	gpt1_mux_fck: gpt1_mux_fck@c40 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		reg = <0x0c40>;
-	};
-
-	gpt1_fck: gpt1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt1_gate_fck>, <&gpt1_mux_fck>;
-	};
-
-	aes2_ick: aes2_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		ti,bit-shift = <28>;
-		reg = <0x0a10>;
-	};
-
-	wkup_32k_fck: wkup_32k_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_32k_fck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	gpio1_dbck: gpio1_dbck@c00 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&wkup_32k_fck>;
-		reg = <0x0c00>;
-		ti,bit-shift = <3>;
-	};
-
-	sha12_ick: sha12_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <27>;
-	};
-
-	wdt2_fck: wdt2_fck@c00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&wkup_32k_fck>;
-		reg = <0x0c00>;
-		ti,bit-shift = <5>;
-	};
-
-	wdt2_ick: wdt2_ick@c10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&wkup_l4_ick>;
-		reg = <0x0c10>;
-		ti,bit-shift = <5>;
-	};
-
-	wdt1_ick: wdt1_ick@c10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&wkup_l4_ick>;
-		reg = <0x0c10>;
-		ti,bit-shift = <4>;
-	};
-
-	gpio1_ick: gpio1_ick@c10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&wkup_l4_ick>;
-		reg = <0x0c10>;
-		ti,bit-shift = <3>;
-	};
-
-	omap_32ksync_ick: omap_32ksync_ick@c10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&wkup_l4_ick>;
-		reg = <0x0c10>;
-		ti,bit-shift = <2>;
-	};
-
-	gpt12_ick: gpt12_ick@c10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&wkup_l4_ick>;
-		reg = <0x0c10>;
-		ti,bit-shift = <1>;
-	};
-
-	gpt1_ick: gpt1_ick@c10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&wkup_l4_ick>;
-		reg = <0x0c10>;
-		ti,bit-shift = <0>;
-	};
-
-	per_96m_fck: per_96m_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_96m_alwon_fck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	per_48m_fck: per_48m_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_48m_fck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	uart3_fck: uart3_fck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&per_48m_fck>;
-		reg = <0x1000>;
-		ti,bit-shift = <11>;
-	};
-
-	gpt2_gate_fck: gpt2_gate_fck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <3>;
-		reg = <0x1000>;
-	};
-
-	gpt2_mux_fck: gpt2_mux_fck@1040 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		reg = <0x1040>;
-	};
-
-	gpt2_fck: gpt2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt2_gate_fck>, <&gpt2_mux_fck>;
-	};
-
-	gpt3_gate_fck: gpt3_gate_fck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <4>;
-		reg = <0x1000>;
-	};
-
-	gpt3_mux_fck: gpt3_mux_fck@1040 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x1040>;
-	};
-
-	gpt3_fck: gpt3_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt3_gate_fck>, <&gpt3_mux_fck>;
-	};
-
-	gpt4_gate_fck: gpt4_gate_fck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <5>;
-		reg = <0x1000>;
-	};
-
-	gpt4_mux_fck: gpt4_mux_fck@1040 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x1040>;
-	};
-
-	gpt4_fck: gpt4_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt4_gate_fck>, <&gpt4_mux_fck>;
-	};
-
-	gpt5_gate_fck: gpt5_gate_fck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <6>;
-		reg = <0x1000>;
-	};
-
-	gpt5_mux_fck: gpt5_mux_fck@1040 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		ti,bit-shift = <3>;
-		reg = <0x1040>;
-	};
-
-	gpt5_fck: gpt5_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt5_gate_fck>, <&gpt5_mux_fck>;
-	};
-
-	gpt6_gate_fck: gpt6_gate_fck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <7>;
-		reg = <0x1000>;
-	};
-
-	gpt6_mux_fck: gpt6_mux_fck@1040 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		ti,bit-shift = <4>;
-		reg = <0x1040>;
-	};
-
-	gpt6_fck: gpt6_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt6_gate_fck>, <&gpt6_mux_fck>;
-	};
-
-	gpt7_gate_fck: gpt7_gate_fck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1000>;
-	};
-
-	gpt7_mux_fck: gpt7_mux_fck@1040 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		ti,bit-shift = <5>;
-		reg = <0x1040>;
-	};
-
-	gpt7_fck: gpt7_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt7_gate_fck>, <&gpt7_mux_fck>;
-	};
-
-	gpt8_gate_fck: gpt8_gate_fck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <9>;
-		reg = <0x1000>;
-	};
-
-	gpt8_mux_fck: gpt8_mux_fck@1040 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		ti,bit-shift = <6>;
-		reg = <0x1040>;
-	};
-
-	gpt8_fck: gpt8_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt8_gate_fck>, <&gpt8_mux_fck>;
-	};
-
-	gpt9_gate_fck: gpt9_gate_fck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <10>;
-		reg = <0x1000>;
-	};
-
-	gpt9_mux_fck: gpt9_mux_fck@1040 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		ti,bit-shift = <7>;
-		reg = <0x1040>;
-	};
-
-	gpt9_fck: gpt9_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt9_gate_fck>, <&gpt9_mux_fck>;
-	};
-
-	per_32k_alwon_fck: per_32k_alwon_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_32k_fck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	gpio6_dbck: gpio6_dbck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&per_32k_alwon_fck>;
-		reg = <0x1000>;
-		ti,bit-shift = <17>;
-	};
-
-	gpio5_dbck: gpio5_dbck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&per_32k_alwon_fck>;
-		reg = <0x1000>;
-		ti,bit-shift = <16>;
-	};
-
-	gpio4_dbck: gpio4_dbck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&per_32k_alwon_fck>;
-		reg = <0x1000>;
-		ti,bit-shift = <15>;
-	};
-
-	gpio3_dbck: gpio3_dbck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&per_32k_alwon_fck>;
-		reg = <0x1000>;
-		ti,bit-shift = <14>;
-	};
-
-	gpio2_dbck: gpio2_dbck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&per_32k_alwon_fck>;
-		reg = <0x1000>;
-		ti,bit-shift = <13>;
-	};
-
-	wdt3_fck: wdt3_fck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&per_32k_alwon_fck>;
-		reg = <0x1000>;
-		ti,bit-shift = <12>;
-	};
-
-	per_l4_ick: per_l4_ick {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&l4_ick>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	gpio6_ick: gpio6_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <17>;
-	};
-
-	gpio5_ick: gpio5_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <16>;
-	};
-
-	gpio4_ick: gpio4_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <15>;
-	};
-
-	gpio3_ick: gpio3_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <14>;
-	};
-
-	gpio2_ick: gpio2_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <13>;
-	};
-
-	wdt3_ick: wdt3_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <12>;
-	};
-
-	uart3_ick: uart3_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <11>;
-	};
-
-	uart4_ick: uart4_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <18>;
-	};
-
-	gpt9_ick: gpt9_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <10>;
-	};
-
-	gpt8_ick: gpt8_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <9>;
-	};
-
-	gpt7_ick: gpt7_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <8>;
-	};
-
-	gpt6_ick: gpt6_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <7>;
-	};
-
-	gpt5_ick: gpt5_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <6>;
-	};
-
-	gpt4_ick: gpt4_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <5>;
-	};
-
-	gpt3_ick: gpt3_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <4>;
-	};
-
-	gpt2_ick: gpt2_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <3>;
-	};
-
-	mcbsp2_ick: mcbsp2_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <0>;
-	};
-
-	mcbsp3_ick: mcbsp3_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <1>;
-	};
-
-	mcbsp4_ick: mcbsp4_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <2>;
-	};
-
-	mcbsp2_gate_fck: mcbsp2_gate_fck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&mcbsp_clks>;
-		ti,bit-shift = <0>;
-		reg = <0x1000>;
-	};
-
-	mcbsp3_gate_fck: mcbsp3_gate_fck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&mcbsp_clks>;
-		ti,bit-shift = <1>;
-		reg = <0x1000>;
-	};
-
-	mcbsp4_gate_fck: mcbsp4_gate_fck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&mcbsp_clks>;
-		ti,bit-shift = <2>;
-		reg = <0x1000>;
-	};
-
-	emu_src_mux_ck: emu_src_mux_ck@1140 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>;
-		reg = <0x1140>;
-	};
-
-	emu_src_ck: emu_src_ck {
-		#clock-cells = <0>;
-		compatible = "ti,clkdm-gate-clock";
-		clocks = <&emu_src_mux_ck>;
-	};
-
-	pclk_fck: pclk_fck@1140 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&emu_src_ck>;
-		ti,bit-shift = <8>;
-		ti,max-div = <7>;
-		reg = <0x1140>;
-		ti,index-starts-at-one;
-	};
-
-	pclkx2_fck: pclkx2_fck@1140 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&emu_src_ck>;
-		ti,bit-shift = <6>;
-		ti,max-div = <3>;
-		reg = <0x1140>;
-		ti,index-starts-at-one;
-	};
-
-	atclk_fck: atclk_fck@1140 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&emu_src_ck>;
-		ti,bit-shift = <4>;
-		ti,max-div = <3>;
-		reg = <0x1140>;
-		ti,index-starts-at-one;
-	};
-
-	traceclk_src_fck: traceclk_src_fck@1140 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x1140>;
-	};
-
-	traceclk_fck: traceclk_fck@1140 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&traceclk_src_fck>;
-		ti,bit-shift = <11>;
-		ti,max-div = <7>;
-		reg = <0x1140>;
-		ti,index-starts-at-one;
-	};
-
-	secure_32k_fck: secure_32k_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	gpt12_fck: gpt12_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&secure_32k_fck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	wdt1_fck: wdt1_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&secure_32k_fck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-};
-
-&cm_clockdomains {
-	core_l3_clkdm: core_l3_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&sdrc_ick>;
-	};
-
-	dpll3_clkdm: dpll3_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dpll3_ck>;
-	};
-
-	dpll1_clkdm: dpll1_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dpll1_ck>;
-	};
-
-	per_clkdm: per_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&uart3_fck>, <&gpio6_dbck>, <&gpio5_dbck>,
-			 <&gpio4_dbck>, <&gpio3_dbck>, <&gpio2_dbck>,
-			 <&wdt3_fck>, <&gpio6_ick>, <&gpio5_ick>, <&gpio4_ick>,
-			 <&gpio3_ick>, <&gpio2_ick>, <&wdt3_ick>, <&uart3_ick>,
-			 <&uart4_ick>, <&gpt9_ick>, <&gpt8_ick>, <&gpt7_ick>,
-			 <&gpt6_ick>, <&gpt5_ick>, <&gpt4_ick>, <&gpt3_ick>,
-			 <&gpt2_ick>, <&mcbsp2_ick>, <&mcbsp3_ick>,
-			 <&mcbsp4_ick>;
-	};
-
-	emu_clkdm: emu_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&emu_src_ck>;
-	};
-
-	dpll4_clkdm: dpll4_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dpll4_ck>;
-	};
-
-	wkup_clkdm: wkup_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&gpio1_dbck>, <&wdt2_fck>, <&wdt2_ick>, <&wdt1_ick>,
-			 <&gpio1_ick>, <&omap_32ksync_ick>, <&gpt12_ick>,
-			 <&gpt1_ick>;
-	};
-
-	dss_clkdm: dss_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dss_tv_fck>, <&dss_96m_fck>, <&dss2_alwon_fck>;
-	};
-
-	core_l4_clkdm: core_l4_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
-			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
-			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
-			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
-			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
-			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
-			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
-			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
-			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>;
-	};
-};
diff --git a/arch/arm/boot/dts/omap4-cpu-thermal.dtsi b/arch/arm/boot/dts/omap4-cpu-thermal.dtsi
deleted file mode 100644
index 03d054b2bf9a..000000000000
--- a/arch/arm/boot/dts/omap4-cpu-thermal.dtsi
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Device Tree Source for OMAP4/5 SoC CPU thermal
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
- * Contact: Eduardo Valentin <eduardo.valentin@ti.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <dt-bindings/thermal/thermal.h>
-
-cpu_thermal: cpu_thermal {
-	polling-delay-passive = <250>; /* milliseconds */
-	polling-delay = <1000>; /* milliseconds */
-
-			/* sensor       ID */
-        thermal-sensors = <&bandgap     0>;
-
-	cpu_trips: trips {
-                cpu_alert0: cpu_alert {
-                        temperature = <100000>; /* millicelsius */
-                        hysteresis = <2000>; /* millicelsius */
-                        type = "passive";
-                };
-                cpu_crit: cpu_crit {
-                        temperature = <125000>; /* millicelsius */
-                        hysteresis = <2000>; /* millicelsius */
-                        type = "critical";
-                };
-        };
-
-	cpu_cooling_maps: cooling-maps {
-		map0 {
-			trip = <&cpu_alert0>;
-			cooling-device =
-				<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts
deleted file mode 100644
index 7c6886cd738f..000000000000
--- a/arch/arm/boot/dts/omap4-panda-es.dts
+++ /dev/null
@@ -1,114 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- */
-/dts-v1/;
-
-#include "omap4460.dtsi"
-#include "omap4-panda-common.dtsi"
-
-/ {
-	model = "TI OMAP4 PandaBoard-ES";
-	compatible = "ti,omap4-panda-es", "ti,omap4-panda", "ti,omap4460", "ti,omap4430", "ti,omap4";
-};
-
-/* Audio routing is differnet between PandaBoard4430 and PandaBoardES */
-&sound {
-	ti,model = "PandaBoardES";
-
-	/* Audio routing */
-	ti,audio-routing =
-		"Headset Stereophone", "HSOL",
-		"Headset Stereophone", "HSOR",
-		"Ext Spk", "HFL",
-		"Ext Spk", "HFR",
-		"Line Out", "AUXL",
-		"Line Out", "AUXR",
-		"AFML", "Line In",
-		"AFMR", "Line In";
-};
-
-/* PandaboardES has external pullups on SCL & SDA */
-&dss_hdmi_pins {
-	pinctrl-single,pins = <
-		OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)		/* hdmi_cec.hdmi_cec */
-		OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0)		/* hdmi_scl.hdmi_scl */
-		OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0)		/* hdmi_sda.hdmi_sda */
-		>;
-};
-
-&omap4_pmx_core {
-	led_gpio_pins: gpio_led_pmx {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x0f6, PIN_OUTPUT | MUX_MODE3)	/* gpio_110 */
-		>;
-	};
-
-	button_pins: pinmux_button_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x0fc, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio_113 */
-		>;
-	};
-
-	bt_pins: pinmux_bt_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x06c, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a22.gpio_46 - BTEN */
-			OMAP4_IOPAD(0x072, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a25.gpio_49 - BTWAKEUP */
-		>;
-	};
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts - HCI */
-			OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
-			OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_rx.uart2_rx */
-			OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
-		>;
-	};
-};
-
-&led_wkgpio_pins {
-	pinctrl-single,pins = <
-		OMAP4_IOPAD(0x05c, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk8 */
-	>;
-};
-
-&leds {
-	pinctrl-0 = <
-		&led_gpio_pins
-		&led_wkgpio_pins
-	>;
-
-	heartbeat {
-		gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>;
-	};
-	mmc {
-		gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&gpio_keys {
-	buttonS2 {
-		gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* gpio_113 */
-	};
-};
-
-&gpio1_target {
-	 ti,no-reset-on-init;
-};
-
-&wl12xx_gpio {
-	pinctrl-single,pins = <
-		OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 */
-		OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a24.gpio_48 */
-	>;
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins &bt_pins>;
-	bluetooth: tiwi {
-		compatible = "ti,wl1271-st";
-		enable-gpios = <&gpio2 14 GPIO_ACTIVE_HIGH>;	/* GPIO_46 */
-	};
-};
diff --git a/arch/arm/boot/dts/ox810se-wd-mbwe.dts b/arch/arm/boot/dts/ox810se-wd-mbwe.dts
deleted file mode 100644
index 7e2fcb220aea..000000000000
--- a/arch/arm/boot/dts/ox810se-wd-mbwe.dts
+++ /dev/null
@@ -1,111 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * wd-mbwe.dtsi - Device tree file for Western Digital My Book World Edition
- *
- * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
- */
-
-/dts-v1/;
-#include "ox810se.dtsi"
-
-/ {
-	model = "Western Digital My Book World Edition";
-
-	compatible = "wd,mbwe", "oxsemi,ox810se";
-
-	chosen {
-		bootargs = "console=ttyS1,115200n8 earlyprintk=serial";
-	};
-
-	memory {
-		/* 128Mbytes DDR */
-		reg = <0x48000000 0x8000000>;
-	};
-
-	aliases {
-		serial1 = &uart1;
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-
-		power {
-			label = "power";
-			gpios = <&gpio0 0 1>;
-			linux,code = <0x198>;
-		};
-
-		recovery {
-			label = "recovery";
-			gpios = <&gpio0 4 1>;
-			linux,code = <0xab>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		a0 {
-			label = "activity0";
-			gpios = <&gpio0 25 0>;
-			default-state = "keep";
-		};
-
-		a1 {
-			label = "activity1";
-			gpios = <&gpio0 26 0>;
-			default-state = "keep";
-		};
-
-		a2 {
-			label = "activity2";
-			gpios = <&gpio0 5 0>;
-			default-state = "keep";
-		};
-
-		a3 {
-			label = "activity3";
-			gpios = <&gpio0 6 0>;
-			default-state = "keep";
-		};
-
-		a4 {
-			label = "activity4";
-			gpios = <&gpio0 7 0>;
-			default-state = "keep";
-		};
-
-		a5 {
-			label = "activity5";
-			gpios = <&gpio1 2 0>;
-			default-state = "keep";
-		};
-	};
-
-	i2c-gpio {
-		compatible = "i2c-gpio";
-		gpios = <&gpio0 3 0 /* sda */
-			 &gpio0 2 0 /* scl */
-			 >;
-		i2c-gpio,delay-us = <2>;        /* ~100 kHz */
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rtc0: rtc@48 {
-			compatible = "st,m41t00";
-			reg = <0x68>;
-		};
-	};
-};
-
-&uart1 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-};
diff --git a/arch/arm/boot/dts/ox810se.dtsi b/arch/arm/boot/dts/ox810se.dtsi
deleted file mode 100644
index 0755e5864c4a..000000000000
--- a/arch/arm/boot/dts/ox810se.dtsi
+++ /dev/null
@@ -1,339 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * ox810se.dtsi - Device tree file for Oxford Semiconductor OX810SE SoC
- *
- * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
- */
-
-#include <dt-bindings/clock/oxsemi,ox810se.h>
-#include <dt-bindings/reset/oxsemi,ox810se.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "oxsemi,ox810se";
-
-	cpus {
-		#address-cells = <0>;
-		#size-cells = <0>;
-
-		cpu {
-			device_type = "cpu";
-			compatible = "arm,arm926ej-s";
-			clocks = <&armclk>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		/* Max 256MB @ 0x48000000 */
-		reg = <0x48000000 0x10000000>;
-	};
-
-	clocks {
-		osc: oscillator {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <25000000>;
-		};
-
-		gmacclk: gmacclk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <125000000>;
-		};
-
-		rpsclk: rpsclk {
-			compatible = "fixed-factor-clock";
-			#clock-cells = <0>;
-			clock-div = <1>;
-			clock-mult = <1>;
-			clocks = <&osc>;
-		};
-
-		pll400: pll400 {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <733333333>;
-		};
-
-		sysclk: sysclk {
-			compatible = "fixed-factor-clock";
-			#clock-cells = <0>;
-			clock-div = <4>;
-			clock-mult = <1>;
-			clocks = <&pll400>;
-		};
-
-		armclk: armclk {
-			compatible = "fixed-factor-clock";
-			#clock-cells = <0>;
-			clock-div = <2>;
-			clock-mult = <1>;
-			clocks = <&pll400>;
-		};
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges;
-		interrupt-parent = <&intc>;
-
-		apb-bridge@44000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges = <0 0x44000000 0x1000000>;
-
-			pinctrl: pinctrl {
-				compatible = "oxsemi,ox810se-pinctrl";
-
-				/* Regmap for sys registers */
-				oxsemi,sys-ctrl = <&sys>;
-
-				pinctrl_uart0: uart0 {
-					uart0a {
-						pins = "gpio31";
-						function = "fct3";
-					};
-					uart0b {
-						pins = "gpio32";
-						function = "fct3";
-					};
-				};
-
-				pinctrl_uart0_modem: uart0_modem {
-					uart0c {
-						pins = "gpio27";
-						function = "fct3";
-					};
-					uart0d {
-						pins = "gpio28";
-						function = "fct3";
-					};
-					uart0e {
-						pins = "gpio29";
-						function = "fct3";
-					};
-					uart0f {
-						pins = "gpio30";
-						function = "fct3";
-					};
-					uart0g {
-						pins = "gpio33";
-						function = "fct3";
-					};
-					uart0h {
-						pins = "gpio34";
-						function = "fct3";
-					};
-				};
-
-				pinctrl_uart1: uart1 {
-					uart1a {
-						pins = "gpio20";
-						function = "fct3";
-					};
-					uart1b {
-						pins = "gpio22";
-						function = "fct3";
-					};
-				};
-
-				pinctrl_uart1_modem: uart1_modem {
-					uart1c {
-						pins = "gpio8";
-						function = "fct3";
-					};
-					uart1d {
-						pins = "gpio9";
-						function = "fct3";
-					};
-					uart1e {
-						pins = "gpio23";
-						function = "fct3";
-					};
-					uart1f {
-						pins = "gpio24";
-						function = "fct3";
-					};
-					uart1g {
-						pins = "gpio25";
-						function = "fct3";
-					};
-					uart1h {
-						pins = "gpio26";
-						function = "fct3";
-					};
-				};
-
-				pinctrl_uart2: uart2 {
-					uart2a {
-						pins = "gpio6";
-						function = "fct3";
-					};
-					uart2b {
-						pins = "gpio7";
-						function = "fct3";
-					};
-				};
-
-				pinctrl_uart2_modem: uart2_modem {
-					uart2c {
-						pins = "gpio0";
-						function = "fct3";
-					};
-					uart2d {
-						pins = "gpio1";
-						function = "fct3";
-					};
-					uart2e {
-						pins = "gpio2";
-						function = "fct3";
-					};
-					uart2f {
-						pins = "gpio3";
-						function = "fct3";
-					};
-					uart2g {
-						pins = "gpio4";
-						function = "fct3";
-					};
-					uart2h {
-						pins = "gpio5";
-						function = "fct3";
-					};
-				};
-			};
-
-			gpio0: gpio@0 {
-				compatible = "oxsemi,ox810se-gpio";
-				reg = <0x000000 0x100000>;
-				interrupts = <21>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				ngpios = <32>;
-				oxsemi,gpio-bank = <0>;
-				gpio-ranges = <&pinctrl 0 0 32>;
-			};
-
-			gpio1: gpio@100000 {
-				compatible = "oxsemi,ox810se-gpio";
-				reg = <0x100000 0x100000>;
-				interrupts = <22>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				ngpios = <3>;
-				oxsemi,gpio-bank = <1>;
-				gpio-ranges = <&pinctrl 0 32 3>;
-			};
-
-			uart0: serial@200000 {
-			       compatible = "ns16550a";
-			       reg = <0x200000 0x100000>;
-			       clocks = <&sysclk>;
-			       interrupts = <23>;
-			       reg-shift = <0>;
-			       fifo-size = <16>;
-			       reg-io-width = <1>;
-			       current-speed = <115200>;
-			       no-loopback-test;
-			       status = "disabled";
-			       resets = <&reset RESET_UART1>;
-			};
-
-			uart1: serial@300000 {
-			       compatible = "ns16550a";
-			       reg = <0x300000 0x100000>;
-			       clocks = <&sysclk>;
-			       interrupts = <24>;
-			       reg-shift = <0>;
-			       fifo-size = <16>;
-			       reg-io-width = <1>;
-			       current-speed = <115200>;
-			       no-loopback-test;
-			       status = "disabled";
-			       resets = <&reset RESET_UART2>;
-			};
-
-			uart2: serial@900000 {
-			       compatible = "ns16550a";
-			       reg = <0x900000 0x100000>;
-			       clocks = <&sysclk>;
-			       interrupts = <29>;
-			       reg-shift = <0>;
-			       fifo-size = <16>;
-			       reg-io-width = <1>;
-			       current-speed = <115200>;
-			       no-loopback-test;
-			       status = "disabled";
-			       resets = <&reset RESET_UART3>;
-			};
-
-			uart3: serial@a00000 {
-			       compatible = "ns16550a";
-			       reg = <0xa00000 0x100000>;
-			       clocks = <&sysclk>;
-			       interrupts = <30>;
-			       reg-shift = <0>;
-			       fifo-size = <16>;
-			       reg-io-width = <1>;
-			       current-speed = <115200>;
-			       no-loopback-test;
-			       status = "disabled";
-			       resets = <&reset RESET_UART4>;
-			};
-		};
-
-		apb-bridge@45000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges = <0 0x45000000 0x1000000>;
-
-			sys: sys-ctrl@0 {
-				compatible = "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd";
-				reg = <0x000000 0x100000>;
-
-				reset: reset-controller {
-					compatible = "oxsemi,ox810se-reset";
-					#reset-cells = <1>;
-				};
-
-				stdclk: stdclk {
-					compatible = "oxsemi,ox810se-stdclk";
-					#clock-cells = <1>;
-				};
-			};
-
-			rps@300000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "simple-bus";
-				ranges = <0 0x300000 0x100000>;
-
-				intc: interrupt-controller@0 {
-					compatible = "oxsemi,ox810se-rps-irq";
-					interrupt-controller;
-					reg = <0 0x200>;
-					#interrupt-cells = <1>;
-					valid-mask = <0xffffffff>;
-					clear-mask = <0xffffffff>;
-				};
-
-				timer0: timer@200 {
-					compatible = "oxsemi,ox810se-rps-timer";
-					reg = <0x200 0x40>;
-					clocks = <&rpsclk>;
-					interrupts = <4 5>;
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts b/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts
deleted file mode 100644
index c3daceccde55..000000000000
--- a/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts
+++ /dev/null
@@ -1,93 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * cloudengines-pogoplug-series-3.dtsi - Device tree file for Cloud Engines PogoPlug Series 3
- *
- * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
- */
-
-/dts-v1/;
-#include "ox820.dtsi"
-
-/ {
-	model = "Cloud Engines PogoPlug Series 3";
-
-	compatible = "cloudengines,pogoplugv3", "oxsemi,ox820";
-
-	chosen {
-		bootargs = "earlyprintk";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory {
-		/* 128Mbytes DDR */
-		reg = <0x60000000 0x8000000>;
-	};
-
-	aliases {
-		serial0 = &uart0;
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		blue {
-			label = "pogoplug:blue";
-			gpios = <&gpio0 2 0>;
-			default-state = "keep";
-		};
-
-		orange {
-			label = "pogoplug:orange";
-			gpios = <&gpio1 16 1>;
-			default-state = "keep";
-		};
-
-		green {
-			label = "pogoplug:green";
-			gpios = <&gpio1 17 1>;
-			default-state = "keep";
-		};
-	};
-};
-
-&uart0 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart0>;
-};
-
-&nandc {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nand>;
-
-	nand@0 {
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		nand-ecc-mode = "soft";
-		nand-ecc-algo = "hamming";
-
-		partition@0 {
-			label = "boot";
-			reg = <0x00000000 0x00e00000>;
-			read-only;
-		};
-
-		partition@e00000 {
-			label = "ubi";
-			reg = <0x00e00000 0x07200000>;
-		};
-	};
-};
-
-&etha {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_etha_mdio>;
-};
diff --git a/arch/arm/boot/dts/ox820.dtsi b/arch/arm/boot/dts/ox820.dtsi
deleted file mode 100644
index 90846a7655b4..000000000000
--- a/arch/arm/boot/dts/ox820.dtsi
+++ /dev/null
@@ -1,299 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * ox820.dtsi - Device tree file for Oxford Semiconductor OX820 SoC
- *
- * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/oxsemi,ox820.h>
-#include <dt-bindings/reset/oxsemi,ox820.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "oxsemi,ox820";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "oxsemi,ox820-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,arm11mpcore";
-			clocks = <&armclk>;
-			reg = <0>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,arm11mpcore";
-			clocks = <&armclk>;
-			reg = <1>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		/* Max 512MB @ 0x60000000 */
-		reg = <0x60000000 0x20000000>;
-	};
-
-	clocks {
-		osc: oscillator {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <25000000>;
-		};
-
-		gmacclk: gmacclk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <125000000>;
-		};
-
-		sysclk: sysclk {
-			compatible = "fixed-factor-clock";
-			#clock-cells = <0>;
-			clock-div = <4>;
-			clock-mult = <1>;
-			clocks = <&osc>;
-		};
-
-		plla: plla {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <850000000>;
-		};
-
-		armclk: armclk {
-			compatible = "fixed-factor-clock";
-			#clock-cells = <0>;
-			clock-div = <2>;
-			clock-mult = <1>;
-			clocks = <&plla>;
-		};
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges;
-		interrupt-parent = <&gic>;
-
-		nandc: nand-controller@41000000 {
-			compatible = "oxsemi,ox820-nand";
-			reg = <0x41000000 0x100000>;
-			clocks = <&stdclk CLK_820_NAND>;
-			resets = <&reset RESET_NAND>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		etha: ethernet@40400000 {
-			compatible = "oxsemi,ox820-dwmac", "snps,dwmac";
-			reg = <0x40400000 0x2000>;
-			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "macirq", "eth_wake_irq";
-			mac-address = [000000000000]; /* Filled in by U-Boot */
-			phy-mode = "rgmii";
-
-			clocks = <&stdclk CLK_820_ETHA>, <&gmacclk>;
-			clock-names = "gmac", "stmmaceth";
-			resets = <&reset RESET_MAC>;
-
-			/* Regmap for sys registers */
-			oxsemi,sys-ctrl = <&sys>;
-
-			status = "disabled";
-		};
-
-		apb-bridge@44000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges = <0 0x44000000 0x1000000>;
-
-			pinctrl: pinctrl {
-				compatible = "oxsemi,ox820-pinctrl";
-
-				/* Regmap for sys registers */
-				oxsemi,sys-ctrl = <&sys>;
-
-				pinctrl_uart0: uart0 {
-					uart0 {
-						pins = "gpio30", "gpio31";
-						function = "fct5";
-					};
-				};
-
-				pinctrl_uart0_modem: uart0_modem {
-					uart0_modem_a {
-						pins = "gpio24", "gpio24", "gpio26", "gpio27";
-						function = "fct4";
-					};
-					uart0_modem_b {
-						pins = "gpio28", "gpio29";
-						function = "fct5";
-					};
-				};
-
-				pinctrl_uart1: uart1 {
-					uart1 {
-						pins = "gpio7", "gpio8";
-						function = "fct4";
-					};
-				};
-
-				pinctrl_uart1_modem: uart1_modem {
-					uart1_modem {
-						pins = "gpio5", "gpio6", "gpio40", "gpio41", "gpio42", "gpio43";
-						function = "fct4";
-					};
-				};
-
-				pinctrl_etha_mdio: etha_mdio {
-					etha_mdio {
-						pins = "gpio3", "gpio4";
-						function = "fct1";
-					};
-				};
-
-				pinctrl_nand: nand {
-					nand {
-						pins = "gpio12", "gpio13", "gpio14", "gpio15",
-						     "gpio16", "gpio17", "gpio18", "gpio19",
-						     "gpio20", "gpio21", "gpio22", "gpio23",
-						     "gpio24";
-						function = "fct1";
-					};
-				};
-			};
-
-			gpio0: gpio@0 {
-				compatible = "oxsemi,ox820-gpio";
-				reg = <0x000000 0x100000>;
-				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				ngpios = <32>;
-				oxsemi,gpio-bank = <0>;
-				gpio-ranges = <&pinctrl 0 0 32>;
-			};
-
-			gpio1: gpio@100000 {
-				compatible = "oxsemi,ox820-gpio";
-				reg = <0x100000 0x100000>;
-				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				ngpios = <18>;
-				oxsemi,gpio-bank = <1>;
-				gpio-ranges = <&pinctrl 0 32 18>;
-			};
-
-			uart0: serial@200000 {
-			       compatible = "ns16550a";
-			       reg = <0x200000 0x100000>;
-			       interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-			       reg-shift = <0>;
-			       fifo-size = <16>;
-			       reg-io-width = <1>;
-			       current-speed = <115200>;
-			       no-loopback-test;
-			       status = "disabled";
-			       clocks = <&sysclk>;
-			       resets = <&reset RESET_UART1>;
-			};
-
-			uart1: serial@300000 {
-			       compatible = "ns16550a";
-			       reg = <0x200000 0x100000>;
-			       interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-			       reg-shift = <0>;
-			       fifo-size = <16>;
-			       reg-io-width = <1>;
-			       current-speed = <115200>;
-			       no-loopback-test;
-			       status = "disabled";
-			       clocks = <&sysclk>;
-			       resets = <&reset RESET_UART2>;
-			};
-
-			rps@400000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "simple-bus";
-				ranges = <0 0x400000 0x100000>;
-
-				intc: interrupt-controller@0 {
-					compatible = "oxsemi,ox820-rps-irq", "oxsemi,ox810se-rps-irq";
-					interrupt-controller;
-					reg = <0 0x200>;
-					interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-					#interrupt-cells = <1>;
-					valid-mask = <0xffffffff>;
-					clear-mask = <0xffffffff>;
-				};
-
-				timer0: timer@200 {
-					compatible = "oxsemi,ox820-rps-timer";
-					reg = <0x200 0x40>;
-					clocks = <&sysclk>;
-					interrupt-parent = <&intc>;
-					interrupts = <4>;
-				};
-			};
-
-			sys: sys-ctrl@e00000 {
-				compatible = "oxsemi,ox820-sys-ctrl", "syscon", "simple-mfd";
-				reg = <0xe00000 0x200000>;
-
-				reset: reset-controller {
-					compatible = "oxsemi,ox820-reset", "oxsemi,ox810se-reset";
-					#reset-cells = <1>;
-				};
-
-				stdclk: stdclk {
-					compatible = "oxsemi,ox820-stdclk", "oxsemi,ox810se-stdclk";
-					#clock-cells = <1>;
-				};
-			};
-		};
-
-		apb-bridge@47000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges = <0 0x47000000 0x1000000>;
-
-			scu: scu@0 {
-				compatible = "arm,arm11mp-scu";
-				reg = <0x0 0x100>;
-			};
-
-			local-timer@600 {
-				compatible = "arm,arm11mp-twd-timer";
-				reg = <0x600 0x20>;
-				interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3)|IRQ_TYPE_LEVEL_HIGH)>;
-				clocks = <&armclk>;
-			};
-
-			gic: gic@1000 {
-				compatible = "arm,arm11mp-gic";
-				interrupt-controller;
-				#interrupt-cells = <3>;
-				reg = <0x1000 0x1000>,
-				      <0x100 0x500>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
deleted file mode 100644
index e1189e929ee6..000000000000
--- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
+++ /dev/null
@@ -1,937 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
-#include "qcom-msm8660.dtsi"
-
-/ {
-	model = "Qualcomm APQ8060 Dragonboard";
-	compatible = "qcom,apq8060-dragonboard", "qcom,msm8660";
-
-	aliases {
-		serial0 = &gsbi12_serial;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	regulators {
-		compatible = "simple-bus";
-
-		/* Main power of the board: 3.7V */
-		vph: regulator-fixed {
-			compatible = "regulator-fixed";
-			regulator-min-microvolt = <3700000>;
-			regulator-max-microvolt = <3700000>;
-			regulator-name = "VPH";
-			regulator-type = "voltage";
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		/* GPIO controlled ethernet power regulator */
-		dragon_veth: xc622a331mrg {
-			compatible = "regulator-fixed";
-			regulator-name = "XC6222A331MR-G";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			vin-supply = <&vph>;
-			gpio = <&pm8058_gpio 40 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			pinctrl-names = "default";
-			pinctrl-0 = <&dragon_veth_gpios>;
-			regulator-always-on;
-		};
-
-		/* VDDvario fixed regulator */
-		dragon_vario: nds332p {
-			compatible = "regulator-fixed";
-			regulator-name = "NDS332P";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			vin-supply = <&pm8058_s3>;
-		};
-
-		/* This is a levelshifter for SDCC5 */
-		dragon_vio_txb: txb0104rgyr {
-			compatible = "regulator-fixed";
-			regulator-name = "Dragon SDCC levelshifter";
-			vin-supply = <&pm8058_l14>;
-			regulator-always-on;
-		};
-	};
-
-	/*
-	 * Capella CM3605 light and proximity sensor mounted directly
-	 * on the sensor board.
-	 */
-	cm3605 {
-		compatible = "capella,cm3605";
-		vdd-supply = <&pm8058_l14>; // 2.85V
-		aset-gpios = <&pm8058_gpio 35 GPIO_ACTIVE_LOW>;
-		capella,aset-resistance-ohms = <100000>;
-		/* Trig on both edges - getting close or far away */
-		interrupts-extended = <&pm8058_gpio 34 IRQ_TYPE_EDGE_BOTH>;
-		/* MPP05 analog input to the XOADC */
-		io-channels = <&xoadc 0x00 0x05>;
-		io-channel-names = "aout";
-		pinctrl-names = "default";
-		pinctrl-0 = <&dragon_cm3605_gpios>, <&dragon_cm3605_mpps>;
-	};
-
-	soc {
-		pinctrl@800000 {
-			/* eMMMC pins, all 8 data lines connected */
-			dragon_sdcc1_pins: sdcc1 {
-				mux {
-					pins = "gpio159", "gpio160", "gpio161",
-					     "gpio162", "gpio163", "gpio164",
-					     "gpio165", "gpio166", "gpio167",
-					     "gpio168";
-					     function = "sdc1";
-				};
-				clk {
-					pins = "gpio167"; /* SDC1 CLK */
-					drive-strength = <16>;
-					bias-disable;
-				};
-				cmd {
-					pins = "gpio168"; /* SDC1 CMD */
-					drive-strength = <10>;
-					bias-pull-up;
-				};
-				data {
-					/* SDC1 D0 to D7 */
-					pins = "gpio159", "gpio160", "gpio161", "gpio162",
-					     "gpio163", "gpio164", "gpio165", "gpio166";
-					drive-strength = <10>;
-					bias-pull-up;
-				};
-			};
-
-			/*
-			 * The SDCC3 pins are hardcoded (non-muxable) but need some pin
-			 * configuration.
-			 */
-			dragon_sdcc3_pins: sdcc3 {
-				clk {
-					pins = "sdc3_clk";
-					drive-strength = <8>;
-					bias-disable;
-				};
-				cmd {
-					pins = "sdc3_cmd";
-					drive-strength = <8>;
-					bias-pull-up;
-				};
-				data {
-					pins = "sdc3_data";
-					drive-strength = <8>;
-					bias-pull-up;
-				};
-			};
-
-			/* Second SD card slot pins */
-			dragon_sdcc5_pins: sdcc5 {
-				mux {
-					pins = "gpio95", "gpio96", "gpio97",
-					    "gpio98", "gpio99", "gpio100";
-					function = "sdc5";
-				};
-				clk {
-					pins = "gpio97"; /* SDC5 CLK */
-					drive-strength = <16>;
-					bias-disable;
-				};
-				cmd {
-					pins = "gpio95"; /* SDC5 CMD */
-					drive-strength = <10>;
-					bias-pull-up;
-				};
-				data {
-					/* SDC5 D0 to D3 */
-					pins = "gpio96", "gpio98", "gpio99", "gpio100";
-					drive-strength = <10>;
-					bias-pull-up;
-				};
-			};
-
-			dragon_gsbi8_i2c_pins: gsbi8_i2c {
-				mux {
-					pins = "gpio64", "gpio65";
-					function = "gsbi8";
-				};
-				pinconf {
-					pins = "gpio64", "gpio65";
-					drive-strength = <16>;
-					/* These have external pull-up 2.2kOhm to 1.8V */
-					bias-disable;
-				};
-			};
-
-			dragon_gsbi12_i2c_pins: gsbi12_i2c {
-				mux {
-					pins = "gpio115", "gpio116";
-					function = "gsbi12";
-				};
-				pinconf {
-					pins = "gpio115", "gpio116";
-					drive-strength = <16>;
-					/* These have external pull-up 4.7kOhm to 1.8V */
-					bias-disable;
-				};
-			};
-
-			/* Primary serial port uart 0 pins */
-			dragon_gsbi12_serial_pins: gsbi12_serial {
-				mux {
-					pins = "gpio117", "gpio118";
-					function = "gsbi12";
-				};
-				tx {
-					pins = "gpio117";
-					drive-strength = <8>;
-					bias-disable;
-				};
-				rx {
-					pins = "gpio118";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
-			};
-
-			dragon_ebi2_pins: ebi2 {
-				/*
-				 * Pins used by EBI2 on the Dragonboard, actually only
-				 * CS2 is used by a real peripheral. CS0 is just
-				 * routed to a test point.
-				 */
-				mux0 {
-					pins =
-					    /* "gpio39", CS1A_N this is not good to mux */
-					    "gpio40", /* CS2A_N */
-					    "gpio134"; /* CS0_N testpoint TP29 */
-					function = "ebi2cs";
-				};
-				mux1 {
-					pins =
-					    /* EBI2_ADDR_7 downto EBI2_ADDR_0 address bus */
-					    "gpio123", "gpio124", "gpio125", "gpio126",
-					    "gpio127", "gpio128", "gpio129", "gpio130",
-					    /* EBI2_DATA_15 downto EBI2_DATA_0 data bus */
-					    "gpio135", "gpio136", "gpio137", "gpio138",
-					    "gpio139", "gpio140", "gpio141", "gpio142",
-					    "gpio143", "gpio144", "gpio145", "gpio146",
-					    "gpio147", "gpio148", "gpio149", "gpio150",
-					    "gpio151", /* EBI2_OE_N */
-					    "gpio153", /* EBI2_ADV */
-					    "gpio157"; /* EBI2_WE_N */
-					function = "ebi2";
-				};
-			};
-
-			/* Interrupt line for the KXSD9 accelerometer */
-			dragon_kxsd9_gpios: kxsd9 {
-				irq {
-					pins = "gpio57"; /* IRQ line */
-					bias-pull-up;
-				};
-			};
-		};
-
-		qcom,ssbi@500000 {
-			pmic@0 {
-				keypad@148 {
-					linux,keymap = <
-					MATRIX_KEY(0, 0, KEY_MENU)
-					MATRIX_KEY(0, 2, KEY_1)
-					MATRIX_KEY(0, 3, KEY_4)
-					MATRIX_KEY(0, 4, KEY_7)
-					MATRIX_KEY(1, 0, KEY_UP)
-					MATRIX_KEY(1, 1, KEY_LEFT)
-					MATRIX_KEY(1, 2, KEY_DOWN)
-					MATRIX_KEY(1, 3, KEY_5)
-					MATRIX_KEY(1, 3, KEY_8)
-					MATRIX_KEY(2, 0, KEY_HOME)
-					MATRIX_KEY(2, 1, KEY_REPLY)
-					MATRIX_KEY(2, 2, KEY_2)
-					MATRIX_KEY(2, 3, KEY_6)
-					MATRIX_KEY(3, 0, KEY_VOLUMEUP)
-					MATRIX_KEY(3, 1, KEY_RIGHT)
-					MATRIX_KEY(3, 2, KEY_3)
-					MATRIX_KEY(3, 3, KEY_9)
-					MATRIX_KEY(3, 4, KEY_SWITCHVIDEOMODE)
-					MATRIX_KEY(4, 0, KEY_VOLUMEDOWN)
-					MATRIX_KEY(4, 1, KEY_BACK)
-					MATRIX_KEY(4, 2, KEY_CAMERA)
-					MATRIX_KEY(4, 3, KEY_KBDILLUMTOGGLE)
-					>;
-					keypad,num-rows = <6>;
-					keypad,num-columns = <5>;
-				};
-
-				gpio@150 {
-					dragon_ethernet_gpios: ethernet-gpios {
-						pinconf {
-							pins = "gpio7";
-							function = "normal";
-							input-enable;
-							bias-disable;
-							power-source = <PM8058_GPIO_S3>;
-						};
-					};
-					dragon_bmp085_gpios: bmp085-gpios {
-						pinconf {
-							pins = "gpio16";
-							function = "normal";
-							input-enable;
-							bias-disable;
-							power-source = <PM8058_GPIO_S3>;
-						};
-					};
-					dragon_mpu3050_gpios: mpu3050-gpios {
-						pinconf {
-							pins = "gpio17";
-							function = "normal";
-							input-enable;
-							bias-disable;
-							power-source = <PM8058_GPIO_S3>;
-						};
-					};
-					dragon_sdcc3_gpios: sdcc3-gpios {
-						pinconf {
-							pins = "gpio22";
-							function = "normal";
-							input-enable;
-							bias-disable;
-							power-source = <PM8058_GPIO_S3>;
-						};
-					};
-					dragon_sdcc5_gpios: sdcc5-gpios {
-						pinconf {
-							pins = "gpio26";
-							function = "normal";
-							input-enable;
-							bias-pull-up;
-							qcom,pull-up-strength = <PMIC_GPIO_PULL_UP_30>;
-							power-source = <PM8058_GPIO_S3>;
-						};
-					};
-					dragon_ak8975_gpios: ak8975-gpios {
-						pinconf {
-							pins = "gpio33";
-							function = "normal";
-							input-enable;
-							bias-disable;
-							power-source = <PM8058_GPIO_S3>;
-						};
-					};
-					dragon_cm3605_gpios: cm3605-gpios {
-						/* Pin 34 connected to the proxy IRQ */
-						pinconf_gpio34 {
-							pins = "gpio34";
-							function = "normal";
-							input-enable;
-							bias-disable;
-							power-source = <PM8058_GPIO_S3>;
-						};
-						/* Pin 35 connected to ASET */
-						pinconf_gpio35 {
-							pins = "gpio35";
-							function = "normal";
-							output-high;
-							bias-disable;
-							power-source = <PM8058_GPIO_S3>;
-						};
-					};
-					dragon_veth_gpios: veth-gpios {
-						pinconf {
-							pins = "gpio40";
-							function = "normal";
-							bias-disable;
-							drive-push-pull;
-						};
-					};
-				};
-
-				mpps@50 {
-					dragon_cm3605_mpps: cm3605-mpps {
-						pinconf {
-							pins = "mpp5";
-							function = "analog";
-							input-enable;
-							bias-high-impedance;
-							/* Let's use channel 5 */
-							qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH5>;
-							power-source = <PM8058_GPIO_S3>;
-						};
-					};
-				};
-
-				xoadc@197 {
-					/* Reference voltage 2.2 V */
-					xoadc-ref-supply = <&pm8058_l18>;
-
-					/* Board-specific channels */
-					mpp5@5 {
-						/* Connected to AOUT of ALS sensor */
-						reg = <0x00 0x05>;
-					};
-					mpp6@6 {
-						/* Connected to test point TP43 */
-						reg = <0x00 0x06>;
-					};
-					mpp7@7 {
-						/* Connected to battery thermistor */
-						reg = <0x00 0x07>;
-					};
-					mpp8@8 {
-						/* Connected to battery ID detector */
-						reg = <0x00 0x08>;
-					};
-					mpp9@9 {
-						/* Connected to XO thermistor */
-						reg = <0x00 0x09>;
-					};
-				};
-
-				led@48 {
-					/*
-					 * The keypad LED @0x48 is routed to
-					 * the sensor board where it is
-					 * connected to an infrared LED
-					 * SFH4650 (60mW, @850nm) next to the
-					 * ambient light and proximity sensor
-					 * Capella Microsystems CM3605.
-					 */
-					compatible = "qcom,pm8058-keypad-led";
-					reg = <0x48>;
-					label = "pm8058:infrared:proximitysensor";
-					default-state = "off";
-					linux,default-trigger = "cm3605";
-				};
-				led@131 {
-					compatible = "qcom,pm8058-led";
-					reg = <0x131>;
-					label = "pm8058:red";
-					default-state = "off";
-				};
-				led@132 {
-					/*
-					 * This is actually green too on my
-					 * board, but documented as yellow.
-					 */
-					compatible = "qcom,pm8058-led";
-					reg = <0x132>;
-					label = "pm8058:yellow";
-					default-state = "off";
-					linux,default-trigger = "mmc0";
-				};
-				led@133 {
-					compatible = "qcom,pm8058-led";
-					reg = <0x133>;
-					label = "pm8058:green";
-					default-state = "on";
-					linux,default-trigger = "heartbeat";
-				};
-			};
-		};
-
-		gsbi@19800000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C>;
-
-			i2c@19880000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&dragon_gsbi8_i2c_pins>;
-
-				eeprom@52 {
-					/* A 16KiB Platform ID EEPROM on the CPU carrier board */
-					compatible = "atmel,24c128";
-					reg = <0x52>;
-					vcc-supply = <&pm8058_s3>;
-					pagesize = <64>;
-				};
-				wm8903: wm8903@1a {
-					/* This Woolfson Micro device has an unrouted interrupt line */
-					compatible = "wlf,wm8903";
-					reg = <0x1a>;
-
-					AVDD-supply = <&pm8058_l16>;
-					CPVDD-supply = <&pm8058_l16>;
-					DBVDD-supply = <&pm8058_s3>;
-					DCVDD-supply = <&pm8058_l0>;
-
-					gpio-controller;
-					#gpio-cells = <2>;
-
-					micdet-cfg = <0>;
-					micdet-delay = <100>;
-					gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
-				};
-			};
-		};
-
-		gsbi@19c00000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C_UART>;
-
-			serial@19c40000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&dragon_gsbi12_serial_pins>;
-			};
-
-			i2c@19c80000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&dragon_gsbi12_i2c_pins>;
-
-				ak8975@c {
-					compatible = "asahi-kasei,ak8975";
-					reg = <0x0c>;
-					interrupt-parent = <&pm8058_gpio>;
-					interrupts = <33 IRQ_TYPE_EDGE_RISING>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&dragon_ak8975_gpios>;
-					vid-supply = <&pm8058_lvs0>; // 1.8V
-					vdd-supply = <&pm8058_l14>; // 2.85V
-				};
-				bmp085@77 {
-					compatible = "bosch,bmp085";
-					reg = <0x77>;
-					interrupt-parent = <&pm8058_gpio>;
-					interrupts = <16 IRQ_TYPE_EDGE_RISING>;
-					reset-gpios = <&tlmm 86 GPIO_ACTIVE_LOW>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&dragon_bmp085_gpios>;
-					vddd-supply = <&pm8058_lvs0>; // 1.8V
-					vdda-supply = <&pm8058_l14>; // 2.85V
-				};
-				mpu3050@68 {
-					compatible = "invensense,mpu3050";
-					reg = <0x68>;
-					/*
-					 * GPIO17 is pulled high by a 10k
-					 * resistor to VLOGIC so needs to be
-					 * active low/falling edge.
-					 */
-					interrupts-extended = <&pm8058_gpio 17 IRQ_TYPE_EDGE_FALLING>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&dragon_mpu3050_gpios>;
-					vlogic-supply = <&pm8058_lvs0>; // 1.8V
-					vdd-supply = <&pm8058_l14>; // 2.85V
-
-					/*
-					 * The MPU-3050 acts as a hub for the
-					 * accelerometer.
-					 */
-					i2c-gate {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						kxsd9@18 {
-							compatible = "kionix,kxsd9";
-							reg = <0x18>;
-							interrupt-parent = <&tlmm>;
-							interrupts = <57 IRQ_TYPE_EDGE_FALLING>;
-							pinctrl-names = "default";
-							pinctrl-0 = <&dragon_kxsd9_gpios>;
-							iovdd-supply = <&pm8058_lvs0>; // 1.8V
-							vdd-supply = <&pm8058_l14>; // 2.85V
-						};
-					};
-				};
-			};
-		};
-
-		external-bus@1a100000 {
-			/* The EBI2 will instantiate first, then populate its children */
-			status = "okay";
-			pinctrl-names = "default";
-			pinctrl-0 = <&dragon_ebi2_pins>;
-
-			/*
-			 * An on-board SMSC LAN9221 chip for "debug ethernet",
-			 * which is actually just an ordinary ethernet on the
-			 * EBI2. This has a 25MHz chrystal next to it, so no
-			 * clocking is needed.
-			 */
-			ethernet@2,0 {
-				compatible = "smsc,lan9221", "smsc,lan9115";
-				reg = <2 0x0 0x100>;
-				/*
-				 * The second interrupt is the PME interrupt
-				 * for network wakeup, connected to the TLMM.
-				 */
-				interrupts-extended = <&pm8058_gpio 7 IRQ_TYPE_EDGE_FALLING>,
-						    <&tlmm 29 IRQ_TYPE_EDGE_RISING>;
-				reset-gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
-				vdd33a-supply = <&dragon_veth>;
-				vddvario-supply = <&dragon_vario>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&dragon_ethernet_gpios>;
-				phy-mode = "mii";
-				reg-io-width = <2>;
-				smsc,force-external-phy;
-				smsc,irq-push-pull;
-
-				/*
-				 * SLOW chipselect config
-				 * Delay 9 cycles (140ns@64MHz) between SMSC
-				 * LAN9221 Ethernet controller reads and writes
-				 * on CS2.
-				 */
-				qcom,xmem-recovery-cycles = <0>;
-				qcom,xmem-write-hold-cycles = <3>;
-				qcom,xmem-write-delta-cycles = <31>;
-				qcom,xmem-read-delta-cycles = <28>;
-				qcom,xmem-write-wait-cycles = <9>;
-				qcom,xmem-read-wait-cycles = <9>;
-			};
-		};
-
-		rpm@104000 {
-			/*
-			 * Set up of the PMIC RPM regulators for this board
-			 * PM8901 supplies "preliminary regulators" whatever
-			 * that means
-			 */
-			pm8901-regulators {
-				vdd_l0-supply = <&pm8901_s4>;
-				vdd_l1-supply = <&vph>;
-				vdd_l2-supply = <&vph>;
-				vdd_l3-supply = <&vph>;
-				vdd_l4-supply = <&vph>;
-				vdd_l5-supply = <&vph>;
-				vdd_l6-supply = <&vph>;
-				/* vdd_s0-supply, vdd_s1-supply: SAW regulators */
-				vdd_s2-supply = <&vph>;
-				vdd_s3-supply = <&vph>;
-				vdd_s4-supply = <&vph>;
-				lvs0_in-supply = <&pm8058_s3>;
-				lvs1_in-supply = <&pm8901_s4>;
-				lvs2_in-supply = <&pm8058_l0>;
-				lvs3_in-supply = <&pm8058_s2>;
-				mvs_in-supply = <&pm8058_s3>;
-
-				l0 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-				l1 {
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					bias-pull-down;
-				};
-				l2 {
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <3300000>;
-					bias-pull-down;
-				};
-				l3 {
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					bias-pull-down;
-				};
-				l4 {
-					regulator-min-microvolt = <2600000>;
-					regulator-max-microvolt = <2600000>;
-					bias-pull-down;
-				};
-				l5 {
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					bias-pull-down;
-				};
-				l6 {
-					regulator-min-microvolt = <2200000>;
-					regulator-max-microvolt = <2200000>;
-					bias-pull-down;
-				};
-
-				/* s0 and s1 are SAW regulators controlled over SPM */
-				s2 {
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1300000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-				s3 {
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-				s4 {
-					regulator-min-microvolt = <1225000>;
-					regulator-max-microvolt = <1225000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				/* LVS0 thru 3 and mvs0 are just switches */
-				lvs0 {
-					regulator-always-on;
-				};
-				lvs1 { };
-				lvs2 { };
-				lvs3 { };
-				mvs0 {};
-
-			};
-
-			pm8058-regulators {
-				vdd_l0_l1_lvs-supply = <&pm8058_s3>;
-				vdd_l2_l11_l12-supply = <&vph>;
-				vdd_l3_l4_l5-supply = <&vph>;
-				vdd_l6_l7-supply = <&vph>;
-				vdd_l8-supply = <&vph>;
-				vdd_l9-supply = <&vph>;
-				vdd_l10-supply = <&vph>;
-				vdd_l13_l16-supply = <&pm8058_s4>;
-				vdd_l14_l15-supply = <&vph>;
-				vdd_l17_l18-supply = <&vph>;
-				vdd_l19_l20-supply = <&vph>;
-				vdd_l21-supply = <&pm8058_s3>;
-				vdd_l22-supply = <&pm8058_s3>;
-				vdd_l23_l24_l25-supply = <&pm8058_s3>;
-				vdd_s0-supply = <&vph>;
-				vdd_s1-supply = <&vph>;
-				vdd_s2-supply = <&vph>;
-				vdd_s3-supply = <&vph>;
-				vdd_s4-supply = <&vph>;
-				vdd_ncp-supply = <&vph>;
-
-				l0 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-				l1 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-				l2 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <2600000>;
-					bias-pull-down;
-				};
-				l3 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-				l4 {
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					bias-pull-down;
-				};
-				l5 {
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					bias-pull-down;
-				};
-				l6 {
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3600000>;
-					bias-pull-down;
-				};
-				l7 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-				l8 {
-					regulator-min-microvolt = <2900000>;
-					regulator-max-microvolt = <3050000>;
-					bias-pull-down;
-				};
-				l9 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-				l10 {
-					regulator-min-microvolt = <2600000>;
-					regulator-max-microvolt = <2600000>;
-					bias-pull-down;
-				};
-				l11 {
-					regulator-min-microvolt = <1500000>;
-					regulator-max-microvolt = <1500000>;
-					bias-pull-down;
-				};
-				l12 {
-					regulator-min-microvolt = <2900000>;
-					regulator-max-microvolt = <2900000>;
-					bias-pull-down;
-				};
-				l13 {
-					regulator-min-microvolt = <2050000>;
-					regulator-max-microvolt = <2050000>;
-					bias-pull-down;
-				};
-				l14 {
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-				};
-				l15 {
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					bias-pull-down;
-				};
-				l16 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-					regulator-always-on;
-				};
-				l17 {
-					// 1.5V according to schematic
-					regulator-min-microvolt = <2600000>;
-					regulator-max-microvolt = <2600000>;
-					bias-pull-down;
-				};
-				l18 {
-					regulator-min-microvolt = <2200000>;
-					regulator-max-microvolt = <2200000>;
-					bias-pull-down;
-				};
-				l19 {
-					regulator-min-microvolt = <2500000>;
-					regulator-max-microvolt = <2500000>;
-					bias-pull-down;
-				};
-				l20 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-				l21 {
-					// 1.1 V according to schematic
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-					regulator-always-on;
-				};
-				l22 {
-					// 1.2 V according to schematic
-					regulator-min-microvolt = <1150000>;
-					regulator-max-microvolt = <1150000>;
-					bias-pull-down;
-				};
-				l23 {
-					// Unused
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-				l24 {
-					// Unused
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-				l25 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-
-				s0 {
-					// regulator-min-microvolt = <500000>;
-					// regulator-max-microvolt = <1325000>;
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-				s1 {
-					// regulator-min-microvolt = <500000>;
-					// regulator-max-microvolt = <1250000>;
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-				s2 {
-					// 1.3 V according to schematic
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1400000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-				s3 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,switch-mode-frequency = <1600000>;
-					regulator-always-on;
-					bias-pull-down;
-				};
-				s4 {
-					regulator-min-microvolt = <2200000>;
-					regulator-max-microvolt = <2200000>;
-					qcom,switch-mode-frequency = <1600000>;
-					regulator-always-on;
-					bias-pull-down;
-				};
-
-				/* LVS0 and LVS1 are just switches */
-				lvs0 {
-					bias-pull-down;
-				};
-				lvs1 {
-					bias-pull-down;
-				};
-
-				ncp {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,switch-mode-frequency = <1600000>;
-				};
-			};
-		};
-		amba {
-			/* Internal 3.69 GiB eMMC */
-			sdcc@12400000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&dragon_sdcc1_pins>;
-				vmmc-supply = <&pm8901_l5>;
-				vqmmc-supply = <&pm8901_lvs0>;
-			};
-
-			/* External micro SD card, directly connected, pulled up to 2.85 V */
-			sdcc@12180000 {
-				status = "okay";
-				/* Enable SSBI GPIO 22 as input, use for card detect */
-				pinctrl-names = "default";
-				pinctrl-0 = <&dragon_sdcc3_pins>, <&dragon_sdcc3_gpios>;
-				cd-gpios = <&pm8058_gpio 22 GPIO_ACTIVE_LOW>;
-				wp-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
-				vmmc-supply = <&pm8058_l14>;
-			};
-
-			/*
-			 * Second external micro SD card, using two TXB104RGYR levelshifters
-			 * to lift from 1.8 V to 2.85 V
-			 */
-			sdcc@12200000 {
-				status = "okay";
-				/* Enable SSBI GPIO 26 as input, use for card detect */
-				pinctrl-names = "default";
-				pinctrl-0 = <&dragon_sdcc5_pins>, <&dragon_sdcc5_gpios>;
-				cd-gpios = <&pm8058_gpio 26 GPIO_ACTIVE_LOW>;
-				wp-gpios = <&tlmm 106 GPIO_ACTIVE_HIGH>;
-				vmmc-supply = <&pm8058_l14>;
-				vqmmc-supply = <&dragon_vio_txb>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
deleted file mode 100644
index 3bce47d16ab3..000000000000
--- a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
+++ /dev/null
@@ -1,359 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-/ {
-	model = "Asus Nexus7(flo)";
-	compatible = "asus,nexus7-flo", "qcom,apq8064";
-
-	aliases {
-		serial0 = &gsbi7_serial;
-		serial1 = &gsbi6_serial;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		ramoops@88d00000{
-			compatible = "ramoops";
-			reg = <0x88d00000 0x100000>;
-			record-size     = <0x00020000>;
-			console-size    = <0x00020000>;
-			ftrace-size     = <0x00020000>;
-		};
-	};
-
-	ext_3p3v: regulator-fixed@1 {
-		compatible = "regulator-fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-name = "ext_3p3v";
-		regulator-type = "voltage";
-		startup-delay-us = <0>;
-		gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-boot-on;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		volume_up {
-			label = "Volume Up";
-			gpios = <&pm8921_gpio 4 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-		volume_down {
-			label = "Volume Down";
-			gpios = <&pm8921_gpio 38 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-	};
-
-	soc {
-		rpm@108000 {
-			regulators {
-				vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
-				vin_lvs1_3_6-supply = <&pm8921_s4>;
-				vin_lvs4_5_7-supply = <&pm8921_s4>;
-
-
-				vdd_l24-supply = <&pm8921_s1>;
-				vdd_l25-supply = <&pm8921_s1>;
-				vin_lvs2-supply = <&pm8921_s1>;
-
-				vdd_l26-supply = <&pm8921_s7>;
-				vdd_l27-supply = <&pm8921_s7>;
-				vdd_l28-supply = <&pm8921_s7>;
-
-				vdd_ncp-supply = <&pm8921_l6>;
-
-				/* Buck SMPS */
-				s1 {
-					regulator-always-on;
-					regulator-min-microvolt = <1225000>;
-					regulator-max-microvolt = <1225000>;
-					qcom,switch-mode-frequency = <3200000>;
-					bias-pull-down;
-				};
-
-				/* msm otg HSUSB_VDDCX */
-				s3 {
-					regulator-min-microvolt = <500000>;
-					regulator-max-microvolt = <1150000>;
-					qcom,switch-mode-frequency = <4800000>;
-				};
-
-				/*
-				 * msm_sdcc.1-sdc-vdd_io
-				 * tabla2x-slim-CDC_VDDA_RX
-				 * tabla2x-slim-CDC_VDDA_TX
-				 * tabla2x-slim-CDC_VDD_CP
-				 * tabla2x-slim-VDDIO_CDC
-				 */
-				s4 {
-					regulator-min-microvolt	= <1800000>;
-					regulator-max-microvolt	= <1800000>;
-					qcom,switch-mode-frequency = <3200000>;
-					regulator-always-on;
-				};
-
-				s7 {
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1300000>;
-					qcom,switch-mode-frequency = <3200000>;
-				};
-
-				/* mipi_dsi.1-dsi1_pll_vdda */
-				l2 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				/* msm_otg-HSUSB_3p3 */
-				l3 {
-					regulator-min-microvolt = <3075000>;
-					regulator-max-microvolt = <3075000>;
-					bias-pull-down;
-				};
-
-				/* msm_otg-HSUSB_1p8 */
-				l4 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				/* msm_sdcc.1-sdc_vdd */
-				l5 {
-					regulator-min-microvolt = <2950000>;
-					regulator-max-microvolt = <2950000>;
-					regulator-always-on;
-					bias-pull-down;
-				};
-
-				l6 {
-					regulator-min-microvolt = <2950000>;
-					regulator-max-microvolt = <2950000>;
-				};
-
-				/* mipi_dsi.1-dsi1_avdd */
-				l11 {
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					bias-pull-down;
-					regulator-always-on;
-				};
-
-				/* pwm_power for backlight */
-				l17 {
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-always-on;
-				};
-
-				/* camera, qdsp6 */
-				l23 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				/*
-				 * tabla2x-slim-CDC_VDDA_A_1P2V
-				 * tabla2x-slim-VDDD_CDC_D
-				 */
-				l25 {
-					regulator-min-microvolt = <1250000>;
-					regulator-max-microvolt = <1250000>;
-					bias-pull-down;
-				};
-
-				lvs1 {
-					bias-pull-down;
-				};
-
-				lvs4 {
-					bias-pull-down;
-				};
-
-				lvs5 {
-					bias-pull-down;
-				};
-
-				lvs6 {
-					bias-pull-down;
-				};
-				/*
-				 * mipi_dsi.1-dsi1_vddio
-				 * pil_riva-pll_vdd
-				 */
-				lvs7 {
-					bias-pull-down;
-				};
-			};
-		};
-
-		mdp@5100000 {
-			status = "okay";
-			ports {
-				port@1 {
-					mdp_dsi1_out: endpoint {
-						remote-endpoint = <&dsi0_in>;
-					};
-				};
-			};
-		};
-
-		dsi0: mdss_dsi@4700000 {
-			status = "okay";
-			vdda-supply = <&pm8921_l2>;/*VDD_MIPI1 to 4*/
-			vdd-supply = <&pm8921_l8>;
-			vddio-supply = <&pm8921_lvs7>;
-			avdd-supply = <&pm8921_l11>;
-			vcss-supply = <&ext_3p3v>;
-
-			panel@0 {
-				reg = <0>;
-				compatible = "jdi,lt070me05000";
-
-				vddp-supply = <&pm8921_l17>;
-				iovcc-supply = <&pm8921_lvs7>;
-
-				enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
-				reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>;
-				dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
-
-				port {
-					panel_in: endpoint {
-						remote-endpoint = <&dsi0_out>;
-					};
-				};
-			};
-			ports {
-				port@0 {
-					dsi0_in: endpoint {
-						remote-endpoint = <&mdp_dsi1_out>;
-					};
-				};
-
-				port@1 {
-					dsi0_out: endpoint {
-						remote-endpoint = <&panel_in>;
-						data-lanes = <0 1 2 3>;
-					};
-				};
-			};
-		};
-
-		dsi-phy@4700200 {
-			status = "okay";
-			vddio-supply = <&pm8921_lvs7>;/*VDD_PLL2_1 to 7*/
-		};
-
-		gsbi@16200000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C>;
-			i2c@16280000 {
-				status = "okay";
-				clock-frequency = <200000>;
-				pinctrl-0 = <&i2c3_pins>;
-				pinctrl-names = "default";
-
-				trackpad@10 {
-					compatible = "elan,ekth3500";
-					reg = <0x10>;
-					interrupt-parent = <&tlmm_pinmux>;
-					interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
-				};
-			};
-		};
-
-
-		gsbi@12440000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C>;
-
-			i2c@12460000 {
-				status = "okay";
-				clock-frequency = <200000>;
-				pinctrl-0 = <&i2c1_pins>;
-				pinctrl-names = "default";
-
-				eeprom@52 {
-					compatible = "atmel,24c128";
-					reg = <0x52>;
-					pagesize = <32>;
-				};
-
-				bq27541@55 {
-					compatible = "ti,bq27541";
-					reg = <0x55>;
-				};
-
-			};
-		};
-
-		gsbi@16500000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C_UART>;
-
-			serial@16540000 {
-				status = "okay";
-
-				pinctrl-names = "default";
-				pinctrl-0 = <&gsbi6_uart_4pins>;
-			};
-		};
-
-		gsbi@16600000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C_UART>;
-			serial@16640000 {
-				status = "okay";
-			};
-		};
-
-		/* OTG */
-		usb@12500000 {
-			status = "okay";
-			dr_mode = "otg";
-			ulpi {
-				phy {
-					v3p3-supply = <&pm8921_l3>;
-					v1p8-supply = <&pm8921_l4>;
-				};
-			};
-		};
-
-		amba {
-			/* eMMC */
-			sdcc@12400000 {
-				status = "okay";
-				vmmc-supply = <&pm8921_l5>;
-				vqmmc-supply = <&pm8921_s4>;
-			};
-		};
-
-		imem@2a03f000 {
-			compatible = "syscon", "simple-mfd";
-			reg = <0x2a03f000 0x1000>;
-
-			reboot-mode {
-				compatible = "syscon-reboot-mode";
-				offset = <0x65c>;
-
-				mode-normal	= <0x77665501>;
-				mode-bootloader	= <0x77665500>;
-				mode-recovery	= <0x77665502>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
deleted file mode 100644
index 0148148a8e0a..000000000000
--- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
+++ /dev/null
@@ -1,246 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-
-/ {
-	model = "CompuLab CM-QS600";
-	compatible = "qcom,apq8064-cm-qs600", "qcom,apq8064";
-
-	aliases {
-		serial0 = &gsbi7_serial;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	pwrseq {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		compatible = "simple-bus";
-
-		sdcc4_pwrseq: sdcc4_pwrseq {
-			pinctrl-names = "default";
-			pinctrl-0 = <&wlan_default_gpios>;
-			compatible = "mmc-pwrseq-simple";
-			reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	soc {
-		pinctrl@800000 {
-			card_detect: card_detect {
-				mux {
-					pins = "gpio26";
-					function = "gpio";
-					bias-disable;
-				};
-			};
-
-			pcie_pins: pcie_pinmux {
-				mux {
-					pins = "gpio27";
-					function = "gpio";
-				};
-				conf {
-					pins = "gpio27";
-					drive-strength = <12>;
-					bias-disable;
-				};
-			};
-		};
-
-		rpm@108000 {
-			regulators {
-				vin_lvs1_3_6-supply = <&pm8921_s4>;
-				vin_lvs2-supply = <&pm8921_s1>;
-				vin_lvs4_5_7-supply = <&pm8921_s4>;
-
-				vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
-				vdd_l24-supply = <&pm8921_s1>;
-				vdd_l25-supply = <&pm8921_s1>;
-				vdd_l26-supply = <&pm8921_s7>;
-				vdd_l27-supply = <&pm8921_s7>;
-				vdd_l28-supply = <&pm8921_s7>;
-
-
-				/* Buck SMPS */
-				s1 {
-					regulator-always-on;
-					regulator-min-microvolt = <1225000>;
-					regulator-max-microvolt = <1225000>;
-					qcom,switch-mode-frequency = <3200000>;
-					bias-pull-down;
-				};
-
-				s3 {
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1400000>;
-					qcom,switch-mode-frequency = <4800000>;
-				};
-
-				s4 {
-					regulator-min-microvolt	= <1800000>;
-					regulator-max-microvolt	= <1800000>;
-					qcom,switch-mode-frequency = <3200000>;
-				};
-
-				s7 {
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1300000>;
-					qcom,switch-mode-frequency = <3200000>;
-				};
-
-				l3 {
-					regulator-min-microvolt = <3050000>;
-					regulator-max-microvolt = <3300000>;
-					bias-pull-down;
-				};
-
-				l4 {
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				l5 {
-					regulator-min-microvolt = <2750000>;
-					regulator-max-microvolt = <3000000>;
-					bias-pull-down;
-				};
-
-				l23 {
-					regulator-min-microvolt = <1700000>;
-					regulator-max-microvolt = <1900000>;
-					bias-pull-down;
-				};
-
-				pm8921_lvs6: lvs6 {
-					bias-pull-down;
-				};
-
-			};
-		};
-
-		gsbi@12440000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C>;
-
-			i2c@12460000 {
-				status = "okay";
-				clock-frequency = <200000>;
-
-				eeprom@50 {
-					compatible = "atmel,24c02";
-					reg = <0x50>;
-					pagesize = <32>;
-				};
-			};
-		};
-
-		gsbi@16600000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C_UART>;
-			serial@16640000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&gsbi7_uart_2pins>;
-			};
-		};
-
-		/* OTG */
-		usb@12500000 {
-			status = "okay";
-			dr_mode = "otg";
-			ulpi {
-				phy {
-					v3p3-supply = <&pm8921_l3>;
-					v1p8-supply = <&pm8921_l4>;
-				};
-			};
-		};
-
-		usb@12520000 {
-			status = "okay";
-			dr_mode = "host";
-			ulpi {
-				phy {
-					v3p3-supply = <&pm8921_l3>;
-					v1p8-supply = <&pm8921_l23>;
-				};
-			};
-		};
-
-		usb@12530000 {
-			status = "okay";
-			dr_mode = "host";
-			ulpi {
-				phy {
-					v3p3-supply = <&pm8921_l3>;
-					v1p8-supply = <&pm8921_l23>;
-				};
-			};
-		};
-
-		/* on board fixed 3.3v supply */
-		v3p3_fixed: v3p3 {
-			compatible = "regulator-fixed";
-			regulator-name = "PCIE V3P3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		qcom,ssbi@500000 {
-			pmic@0 {
-				gpio@150 {
-					wlan_default_gpios: wlan-gpios {
-						pios {
-							pins = "gpio43";
-							function = "normal";
-							bias-disable;
-							power-source = <PM8921_GPIO_S4>;
-						};
-					};
-				};
-			};
-		};
-
-		pci@1b500000 {
-			status = "okay";
-			vdda-supply = <&pm8921_s3>;
-			vdda_phy-supply = <&pm8921_lvs6>;
-			vdda_refclk-supply = <&v3p3_fixed>;
-			pinctrl-0 = <&pcie_pins>;
-			pinctrl-names = "default";
-			perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
-		};
-
-		amba {
-			/* eMMC */
-			sdcc1: sdcc@12400000 {
-				status = "okay";
-				vmmc-supply = <&pm8921_l5>;
-				vqmmc-supply = <&pm8921_s4>;
-			};
-
-			/* External micro SD card */
-			sdcc3: sdcc@12180000 {
-				status = "okay";
-				vmmc-supply = <&v3p3_fixed>;
-				pinctrl-names	= "default";
-				pinctrl-0	= <&card_detect>;
-				cd-gpios	= <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
-			};
-			/* WLAN */
-			sdcc4: sdcc@121c0000 {
-				status = "okay";
-				vmmc-supply = <&v3p3_fixed>;
-				vqmmc-supply = <&v3p3_fixed>;
-				mmc-pwrseq = <&sdcc4_pwrseq>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
deleted file mode 100644
index d0a17b5a5fa3..000000000000
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ /dev/null
@@ -1,381 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-
-/ {
-	model = "Qualcomm APQ8064/IFC6410";
-	compatible = "qcom,apq8064-ifc6410", "qcom,apq8064";
-
-	aliases {
-		serial0 = &gsbi7_serial;
-		serial1 = &gsbi6_serial;
-		i2c0 = &gsbi1_i2c;
-		i2c1 = &gsbi2_i2c;
-		i2c2 = &gsbi3_i2c;
-		i2c3 = &gsbi4_i2c;
-		spi0 = &gsbi5_spi;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	pwrseq {
-		compatible = "simple-bus";
-
-		sdcc4_pwrseq: sdcc4_pwrseq {
-			pinctrl-names = "default";
-			pinctrl-0 = <&wlan_default_gpios>;
-			compatible = "mmc-pwrseq-simple";
-			reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&notify_led>;
-
-		led@1 {
-			label = "apq8064:green:user1";
-			gpios = <&pm8921_gpio 18 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-	};
-
-	hdmi-out {
-		compatible = "hdmi-connector";
-		type = "d";
-
-		port {
-			hdmi_con: endpoint {
-				remote-endpoint = <&hdmi_out>;
-			};
-		};
-	};
-
-	soc {
-		pinctrl@800000 {
-			card_detect: card_detect {
-				mux {
-					pins = "gpio26";
-					function = "gpio";
-					bias-disable;
-				};
-			};
-
-			pcie_pins: pcie_pinmux {
-				mux {
-					pins = "gpio27";
-					function = "gpio";
-				};
-				conf {
-					pins = "gpio27";
-					drive-strength = <12>;
-					bias-disable;
-				};
-			};
-		};
-
-		rpm@108000 {
-			regulators {
-				vin_lvs1_3_6-supply = <&pm8921_s4>;
-				vin_lvs2-supply = <&pm8921_s1>;
-				vin_lvs4_5_7-supply = <&pm8921_s4>;
-
-				vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
-				vdd_l24-supply = <&pm8921_s1>;
-				vdd_l25-supply = <&pm8921_s1>;
-				vdd_l26-supply = <&pm8921_s7>;
-				vdd_l27-supply = <&pm8921_s7>;
-				vdd_l28-supply = <&pm8921_s7>;
-
-
-				/* Buck SMPS */
-				s1 {
-					regulator-always-on;
-					regulator-min-microvolt = <1225000>;
-					regulator-max-microvolt = <1225000>;
-					qcom,switch-mode-frequency = <3200000>;
-					bias-pull-down;
-				};
-
-				s3 {
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1400000>;
-					qcom,switch-mode-frequency = <4800000>;
-				};
-
-				s4 {
-					regulator-min-microvolt	= <1800000>;
-					regulator-max-microvolt	= <1800000>;
-					qcom,switch-mode-frequency = <3200000>;
-				};
-
-				s7 {
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1300000>;
-					qcom,switch-mode-frequency = <3200000>;
-				};
-
-				l3 {
-					regulator-min-microvolt = <3050000>;
-					regulator-max-microvolt = <3300000>;
-					bias-pull-down;
-				};
-
-				l4 {
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				l5 {
-					regulator-min-microvolt = <2750000>;
-					regulator-max-microvolt = <3000000>;
-					bias-pull-down;
-				};
-
-				l6 {
-					regulator-min-microvolt = <2950000>;
-					regulator-max-microvolt = <2950000>;
-					bias-pull-down;
-				};
-
-				l23 {
-					regulator-min-microvolt = <1700000>;
-					regulator-max-microvolt = <1900000>;
-					bias-pull-down;
-				};
-
-				lvs1 {
-					bias-pull-down;
-				};
-
-				lvs6 {
-					bias-pull-down;
-				};
-			};
-		};
-
-		ext_3p3v: regulator-fixed@1 {
-			compatible = "regulator-fixed";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-name = "ext_3p3v";
-			regulator-type = "voltage";
-			startup-delay-us = <0>;
-			gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			regulator-boot-on;
-		};
-
-		gsbi3: gsbi@16200000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C>;
-			i2c@16280000 {
-				status = "okay";
-			};
-		};
-
-		gsbi@16300000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C>;
-			/* CAM I2C MIPI-CSI connector */
-			i2c@16380000 {
-				status = "okay";
-			};
-		};
-
-		gsbi@12440000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C>;
-
-			i2c@12460000 {
-				status = "okay";
-				clock-frequency = <200000>;
-
-				eeprom@52 {
-					compatible = "atmel,24c128";
-					reg = <0x52>;
-					pagesize = <32>;
-				};
-			};
-		};
-
-		gsbi@1a200000 {
-			qcom,mode = <GSBI_PROT_SPI>;
-			status = "okay";
-			spi4: spi@1a280000 {
-				status = "okay";
-				num-cs = <1>;
-				cs-gpios = <&tlmm_pinmux 53 0>;
-			};
-		};
-
-		gsbi@16500000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_UART_W_FC>;
-
-			serial@16540000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&gsbi6_uart_4pins>;
-			};
-		};
-
-		gsbi@16600000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C_UART>;
-			serial@16640000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&gsbi7_uart_2pins>;
-			};
-		};
-
-		sata_phy0: phy@1b400000 {
-			status = "okay";
-		};
-
-		sata0: sata@29000000 {
-			status		= "okay";
-			target-supply	= <&pm8921_s4>;
-		};
-
-		/* OTG */
-		usb@12500000 {
-			status = "okay";
-			dr_mode = "otg";
-			ulpi {
-				phy {
-					v3p3-supply = <&pm8921_l3>;
-					v1p8-supply = <&pm8921_l4>;
-				};
-			};
-		};
-
-		usb@12520000 {
-			status = "okay";
-			dr_mode = "host";
-			ulpi {
-				phy {
-					v3p3-supply = <&pm8921_l3>;
-					v1p8-supply = <&pm8921_l23>;
-				};
-			};
-		};
-
-		usb@12530000 {
-			status = "okay";
-			dr_mode = "host";
-			ulpi {
-				phy {
-					v3p3-supply = <&pm8921_l3>;
-					v1p8-supply = <&pm8921_l23>;
-				};
-			};
-		};
-
-		pci@1b500000 {
-			status = "okay";
-			vdda-supply = <&pm8921_s3>;
-			vdda_phy-supply = <&pm8921_lvs6>;
-			vdda_refclk-supply = <&ext_3p3v>;
-			pinctrl-0 = <&pcie_pins>;
-			pinctrl-names = "default";
-			perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
-		};
-
-		qcom,ssbi@500000 {
-			pmic@0 {
-				gpio@150 {
-					wlan_default_gpios: wlan-gpios {
-						pios {
-							pins = "gpio43";
-							function = "normal";
-							bias-disable;
-							power-source = <PM8921_GPIO_S4>;
-						};
-					};
-
-					notify_led: nled {
-						pios {
-							pins = "gpio18";
-							function = "normal";
-							bias-disable;
-							power-source = <PM8921_GPIO_S4>;
-						};
-					};
-				};
-			};
-		};
-
-		amba {
-			/* eMMC */
-			sdcc1: sdcc@12400000 {
-				status = "okay";
-				vmmc-supply = <&pm8921_l5>;
-				vqmmc-supply = <&pm8921_s4>;
-			};
-
-			/* External micro SD card */
-			sdcc3: sdcc@12180000 {
-				status = "okay";
-				vmmc-supply = <&pm8921_l6>;
-				pinctrl-names	= "default";
-				pinctrl-0	= <&card_detect>;
-				cd-gpios	= <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
-			};
-			/* WLAN */
-			sdcc4: sdcc@121c0000 {
-				status = "okay";
-				vmmc-supply = <&ext_3p3v>;
-				vqmmc-supply = <&pm8921_lvs1>;
-				mmc-pwrseq = <&sdcc4_pwrseq>;
-			};
-		};
-
-		hdmi-tx@4a00000 {
-			status = "okay";
-
-			core-vdda-supply = <&pm8921_hdmi_switch>;
-			hdmi-mux-supply = <&ext_3p3v>;
-
-			hpd-gpios = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>;
-
-			ports {
-				port@0 {
-					endpoint {
-						remote-endpoint = <&mdp_dtv_out>;
-					};
-				};
-
-				port@1 {
-					endpoint {
-						remote-endpoint = <&hdmi_con>;
-					};
-				};
-			};
-		};
-
-		hdmi-phy@4a00400 {
-			status = "okay";
-
-			core-vdda-supply = <&pm8921_hdmi_switch>;
-		};
-
-		mdp@5100000 {
-			status = "okay";
-
-			ports {
-				port@3 {
-					endpoint {
-						remote-endpoint = <&hdmi_in>;
-					};
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
deleted file mode 100644
index cbe42c4153a0..000000000000
--- a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
+++ /dev/null
@@ -1,325 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-
-&tlmm_pinmux {
-	sdc4_gpios: sdc4-gpios {
-		pios {
-			pins = "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68";
-			function = "sdc4";
-		};
-	};
-
-	sdcc1_pins: sdcc1-pin-active {
-		clk {
-			pins = "sdc1_clk";
-			drive-strengh = <16>;
-			bias-disable;
-		};
-
-		cmd {
-			pins = "sdc1_cmd";
-			drive-strengh = <10>;
-			bias-pull-up;
-		};
-
-		data {
-			pins = "sdc1_data";
-			drive-strengh = <10>;
-			bias-pull-up;
-		};
-	};
-
-	sdcc3_pins: sdcc3-pin-active {
-		clk {
-			pins = "sdc3_clk";
-			drive-strengh = <8>;
-			bias-disable;
-		};
-
-		cmd {
-			pins = "sdc3_cmd";
-			drive-strengh = <8>;
-			bias-pull-up;
-		};
-
-		data {
-			pins = "sdc3_data";
-			drive-strengh = <8>;
-			bias-pull-up;
-		};
-	};
-
-	ps_hold: ps_hold {
-		mux {
-			pins = "gpio78";
-			function = "ps_hold";
-		};
-	};
-
-	i2c1_pins: i2c1 {
-		mux {
-			pins = "gpio20", "gpio21";
-			function = "gsbi1";
-		};
-
-		pinconf {
-			pins = "gpio20", "gpio21";
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	i2c1_pins_sleep: i2c1_pins_sleep {
-		mux {
-			pins = "gpio20", "gpio21";
-			function = "gpio";
-		};
-		pinconf {
-			pins = "gpio20", "gpio21";
-			drive-strength = <2>;
-			bias-disable = <0>;
-		};
-	};
-
-	gsbi1_uart_2pins: gsbi1_uart_2pins {
-		mux {
-			pins = "gpio18", "gpio19";
-			function = "gsbi1";
-		};
-	};
-
-	gsbi1_uart_4pins: gsbi1_uart_4pins {
-		mux {
-			pins = "gpio18", "gpio19", "gpio20", "gpio21";
-			function = "gsbi1";
-		};
-	};
-
-	i2c2_pins: i2c2 {
-		mux {
-			pins = "gpio24", "gpio25";
-			function = "gsbi2";
-		};
-
-		pinconf {
-			pins = "gpio24", "gpio25";
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	i2c2_pins_sleep: i2c2_pins_sleep {
-		mux {
-			pins = "gpio24", "gpio25";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio24", "gpio25";
-			drive-strength = <2>;
-			bias-disable = <0>;
-		};
-	};
-
-	i2c3_pins: i2c3 {
-		mux {
-			pins = "gpio8", "gpio9";
-			function = "gsbi3";
-		};
-
-		pinconf {
-			pins = "gpio8", "gpio9";
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	i2c3_pins_sleep: i2c3_pins_sleep {
-		mux {
-			pins = "gpio8", "gpio9";
-			function = "gpio";
-		};
-		pinconf {
-			pins = "gpio8", "gpio9";
-			drive-strength = <2>;
-			bias-disable = <0>;
-		};
-	};
-
-	i2c4_pins: i2c4 {
-		mux {
-			pins = "gpio12", "gpio13";
-			function = "gsbi4";
-		};
-
-		pinconf {
-			pins = "gpio12", "gpio13";
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	i2c4_pins_sleep: i2c4_pins_sleep {
-		mux {
-			pins = "gpio12", "gpio13";
-			function = "gpio";
-		};
-		pinconf {
-			pins = "gpio12", "gpio13";
-			drive-strength = <2>;
-			bias-disable = <0>;
-		};
-	};
-
-	spi5_default: spi5_default {
-		pinmux {
-			pins = "gpio51", "gpio52", "gpio54";
-			function = "gsbi5";
-		};
-
-		pinmux_cs {
-			function = "gpio";
-			pins = "gpio53";
-		};
-
-		pinconf {
-			pins = "gpio51", "gpio52", "gpio54";
-			drive-strength = <16>;
-			bias-disable;
-		};
-
-		pinconf_cs {
-			pins = "gpio53";
-			drive-strength = <16>;
-			bias-disable;
-			output-high;
-		};
-	};
-
-	spi5_sleep: spi5_sleep {
-		pinmux {
-			function = "gpio";
-			pins = "gpio51", "gpio52", "gpio53", "gpio54";
-		};
-
-		pinconf {
-			pins = "gpio51", "gpio52", "gpio53", "gpio54";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
-	};
-
-	i2c6_pins: i2c6 {
-		mux {
-			pins = "gpio16", "gpio17";
-			function = "gsbi6";
-		};
-
-		pinconf {
-			pins = "gpio16", "gpio17";
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	i2c6_pins_sleep: i2c6_pins_sleep {
-		mux {
-			pins = "gpio16", "gpio17";
-			function = "gpio";
-		};
-		pinconf {
-			pins = "gpio16", "gpio17";
-			drive-strength = <2>;
-			bias-disable = <0>;
-		};
-	};
-
-	gsbi6_uart_2pins: gsbi6_uart_2pins {
-		mux {
-			pins = "gpio14", "gpio15";
-			function = "gsbi6";
-		};
-	};
-
-	gsbi6_uart_4pins: gsbi6_uart_4pins {
-		mux {
-			pins = "gpio14", "gpio15", "gpio16", "gpio17";
-			function = "gsbi6";
-		};
-	};
-
-	gsbi7_uart_2pins: gsbi7_uart_2pins {
-		mux {
-			pins = "gpio82", "gpio83";
-			function = "gsbi7";
-		};
-	};
-
-	gsbi7_uart_4pins: gsbi7_uart_4pins {
-		mux {
-			pins = "gpio82", "gpio83", "gpio84", "gpio85";
-			function = "gsbi7";
-		};
-	};
-
-	i2c7_pins: i2c7 {
-		mux {
-			pins = "gpio84", "gpio85";
-			function = "gsbi7";
-		};
-
-		pinconf {
-			pins = "gpio84", "gpio85";
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	i2c7_pins_sleep: i2c7_pins_sleep {
-		mux {
-			pins = "gpio84", "gpio85";
-			function = "gpio";
-		};
-		pinconf {
-			pins = "gpio84", "gpio85";
-			drive-strength = <2>;
-			bias-disable = <0>;
-		};
-	};
-
-	riva_fm_pin_a: riva-fm-active {
-		pins = "gpio14", "gpio15";
-		function = "riva_fm";
-	};
-
-	riva_bt_pin_a: riva-bt-active {
-		pins = "gpio16", "gpio17";
-		function = "riva_bt";
-	};
-
-	riva_wlan_pin_a: riva-wlan-active {
-		pins = "gpio64", "gpio65", "gpio66", "gpio67", "gpio68";
-		function = "riva_wlan";
-
-		drive-strength = <6>;
-		bias-pull-down;
-	};
-
-	hdmi_pinctrl: hdmi-pinctrl {
-		mux {
-			pins = "gpio70", "gpio71", "gpio72";
-			function = "hdmi";
-		};
-
-		pinconf_ddc {
-			pins = "gpio70", "gpio71";
-			bias-pull-up;
-			drive-strength = <2>;
-		};
-
-		pinconf_hpd {
-			pins = "gpio72";
-			bias-pull-down;
-			drive-strength = <16>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
deleted file mode 100644
index 72e47bdc5c12..000000000000
--- a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
+++ /dev/null
@@ -1,402 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/mfd/qcom-rpm.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-
-/ {
-	model = "Sony Xperia Z";
-	compatible = "sony,xperia-yuga", "qcom,apq8064";
-
-	aliases {
-		serial0 = &gsbi5_serial;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		input-name = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_keys_pin_a>;
-
-		camera-focus {
-			label = "camera_focus";
-			gpios = <&pm8921_gpio 3 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_CAMERA_FOCUS>;
-		};
-
-		camera-snapshot {
-			label = "camera_snapshot";
-			gpios = <&pm8921_gpio 4 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_CAMERA>;
-		};
-
-		volume-down {
-			label = "volume_down";
-			gpios = <&pm8921_gpio 29 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-
-		volume-up {
-			label = "volume_up";
-			gpios = <&pm8921_gpio 35 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-	};
-
-	soc {
-		pinctrl@800000 {
-			gsbi5_uart_pin_a: gsbi5-uart-pin-active {
-				rx {
-					pins = "gpio52";
-					function = "gsbi5";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
-
-				tx {
-					pins = "gpio51";
-					function = "gsbi5";
-					drive-strength = <4>;
-					bias-disable;
-				};
-			};
-
-
-			sdcc3_cd_pin_a: sdcc3-cd-pin-active {
-				pins = "gpio26";
-				function = "gpio";
-
-				drive-strength = <2>;
-				bias-disable;
-			};
-		};
-
-
-		rpm@108000 {
-			regulators {
-				vin_l1_l2_l12_l18-supply = <&pm8921_s4>;
-				vin_lvs_1_3_6-supply = <&pm8921_s4>;
-				vin_lvs_4_5_7-supply = <&pm8921_s4>;
-				vin_ncp-supply = <&pm8921_l6>;
-				vin_lvs2-supply = <&pm8921_s4>;
-				vin_l24-supply = <&pm8921_s1>;
-				vin_l25-supply = <&pm8921_s1>;
-				vin_l27-supply = <&pm8921_s7>;
-				vin_l28-supply = <&pm8921_s7>;
-
-				/* Buck SMPS */
-				s1 {
-					regulator-always-on;
-					regulator-min-microvolt = <1225000>;
-					regulator-max-microvolt = <1225000>;
-					qcom,switch-mode-frequency = <3200000>;
-					bias-pull-down;
-				};
-
-				s2 {
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1300000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				s3 {
-					regulator-min-microvolt = <500000>;
-					regulator-max-microvolt = <1150000>;
-					qcom,switch-mode-frequency = <4800000>;
-					bias-pull-down;
-				};
-
-				s4 {
-					regulator-always-on;
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-					qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
-				};
-
-				s7 {
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1300000>;
-					qcom,switch-mode-frequency = <3200000>;
-				};
-
-				s8 {
-					regulator-min-microvolt = <2200000>;
-					regulator-max-microvolt = <2200000>;
-					qcom,switch-mode-frequency = <1600000>;
-				};
-
-				/* PMOS LDO */
-				l1 {
-					regulator-always-on;
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					bias-pull-down;
-				};
-
-				l2 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-
-				l3 {
-					regulator-min-microvolt = <3075000>;
-					regulator-max-microvolt = <3075000>;
-					bias-pull-down;
-				};
-
-				l4 {
-					regulator-always-on;
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				l5 {
-					regulator-min-microvolt = <2950000>;
-					regulator-max-microvolt = <2950000>;
-					bias-pull-down;
-				};
-
-				l6 {
-					regulator-min-microvolt = <2950000>;
-					regulator-max-microvolt = <2950000>;
-					bias-pull-down;
-				};
-
-				l7 {
-					regulator-min-microvolt = <1850000>;
-					regulator-max-microvolt = <2950000>;
-					bias-pull-down;
-				};
-
-				l8 {
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					bias-pull-down;
-				};
-
-				l9 {
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					bias-pull-down;
-				};
-
-				l10 {
-					regulator-min-microvolt = <2900000>;
-					regulator-max-microvolt = <2900000>;
-					bias-pull-down;
-				};
-
-				l11 {
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					bias-pull-down;
-				};
-
-				l12 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-
-				l14 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				l15 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <2950000>;
-					bias-pull-down;
-				};
-
-				l16 {
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					bias-pull-down;
-				};
-
-				l17 {
-					regulator-min-microvolt = <2000000>;
-					regulator-max-microvolt = <2000000>;
-					bias-pull-down;
-				};
-
-				l18 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-
-				l21 {
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					bias-pull-down;
-				};
-
-				l22 {
-					regulator-min-microvolt = <2600000>;
-					regulator-max-microvolt = <2600000>;
-					bias-pull-down;
-				};
-
-				l23 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				l24 {
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt = <1150000>;
-					bias-pull-down;
-				};
-
-				l25 {
-					regulator-always-on;
-					regulator-min-microvolt = <1250000>;
-					regulator-max-microvolt = <1250000>;
-					bias-pull-down;
-				};
-
-				l27 {
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-				};
-
-				l28 {
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					bias-pull-down;
-				};
-
-				l29 {
-					regulator-min-microvolt = <2000000>;
-					regulator-max-microvolt = <2000000>;
-					bias-pull-down;
-				};
-
-				/* Low Voltage Switch */
-				lvs1 {
-					bias-pull-down;
-				};
-
-				lvs2 {
-					bias-pull-down;
-				};
-
-				lvs3 {
-					bias-pull-down;
-				};
-
-				lvs4 {
-					bias-pull-down;
-				};
-
-				lvs5 {
-					bias-pull-down;
-				};
-
-				lvs6 {
-					bias-pull-down;
-				};
-
-				lvs7 {
-					bias-pull-down;
-				};
-
-				usb-switch {};
-
-				hdmi-switch {};
-
-				ncp {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,switch-mode-frequency = <1600000>;
-				};
-			};
-		};
-
-		qcom,ssbi@500000 {
-			pmic@0 {
-				gpio@150 {
-					gpio_keys_pin_a: gpio-keys-pin-active {
-						pins = "gpio3", "gpio4", "gpio29", "gpio35";
-						function = "normal";
-
-						bias-pull-up;
-						drive-push-pull;
-						input-enable;
-						power-source = <2>;
-						qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
-						qcom,pull-up-strength = <0>;
-					};
-				};
-			};
-		};
-
-		usb@12500000 {
-			status = "okay";
-			dr_mode = "otg";
-			ulpi {
-				phy {
-					v3p3-supply = <&pm8921_l3>;
-					v1p8-supply = <&pm8921_l4>;
-				};
-			};
-		};
-
-		gsbi@1a200000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C_UART>;
-
-			serial@1a240000 {
-				status = "okay";
-
-				pinctrl-names = "default";
-				pinctrl-0 = <&gsbi5_uart_pin_a>;
-			};
-		};
-
-		amba {
-			sdcc1: sdcc@12400000 {
-				status = "okay";
-
-				vmmc-supply = <&pm8921_l5>;
-				vqmmc-supply = <&pm8921_s4>;
-			};
-
-			sdcc3: sdcc@12180000 {
-				status = "okay";
-
-				vmmc-supply = <&pm8921_l6>;
-				cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
-
-				pinctrl-names = "default";
-				pinctrl-0 = <&sdcc3_pins>, <&sdcc3_cd_pin_a>;
-			};
-		};
-
-		riva-pil@3204000 {
-			status = "okay";
-
-			pinctrl-names = "default";
-			pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
deleted file mode 100644
index d1c1c6aab2b8..000000000000
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ /dev/null
@@ -1,1764 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include <dt-bindings/clock/qcom,gcc-msm8960.h>
-#include <dt-bindings/reset/qcom,gcc-msm8960.h>
-#include <dt-bindings/clock/qcom,mmcc-msm8960.h>
-#include <dt-bindings/clock/qcom,rpmcc.h>
-#include <dt-bindings/soc/qcom,gsbi.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "Qualcomm APQ8064";
-	compatible = "qcom,apq8064";
-	interrupt-parent = <&intc>;
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		smem_region: smem@80000000 {
-			reg = <0x80000000 0x200000>;
-			no-map;
-		};
-
-		wcnss_mem: wcnss@8f000000 {
-			reg = <0x8f000000 0x700000>;
-			no-map;
-		};
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		CPU0: cpu@0 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v1";
-			device_type = "cpu";
-			reg = <0>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc0>;
-			qcom,saw = <&saw0>;
-			cpu-idle-states = <&CPU_SPC>;
-		};
-
-		CPU1: cpu@1 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v1";
-			device_type = "cpu";
-			reg = <1>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc1>;
-			qcom,saw = <&saw1>;
-			cpu-idle-states = <&CPU_SPC>;
-		};
-
-		CPU2: cpu@2 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v1";
-			device_type = "cpu";
-			reg = <2>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc2>;
-			qcom,saw = <&saw2>;
-			cpu-idle-states = <&CPU_SPC>;
-		};
-
-		CPU3: cpu@3 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v1";
-			device_type = "cpu";
-			reg = <3>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc3>;
-			qcom,saw = <&saw3>;
-			cpu-idle-states = <&CPU_SPC>;
-		};
-
-		L2: l2-cache {
-			compatible = "cache";
-			cache-level = <2>;
-		};
-
-		idle-states {
-			CPU_SPC: spc {
-				compatible = "qcom,idle-state-spc",
-						"arm,idle-state";
-				entry-latency-us = <400>;
-				exit-latency-us = <900>;
-				min-residency-us = <3000>;
-			};
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x0>;
-	};
-
-	thermal-zones {
-		cpu-thermal0 {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&gcc 7>;
-			coefficients = <1199 0>;
-
-			trips {
-				cpu_alert0: trip0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu_crit0: trip1 {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		cpu-thermal1 {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&gcc 8>;
-			coefficients = <1132 0>;
-
-			trips {
-				cpu_alert1: trip0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu_crit1: trip1 {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		cpu-thermal2 {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&gcc 9>;
-			coefficients = <1199 0>;
-
-			trips {
-				cpu_alert2: trip0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu_crit2: trip1 {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		cpu-thermal3 {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&gcc 10>;
-			coefficients = <1132 0>;
-
-			trips {
-				cpu_alert3: trip0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu_crit3: trip1 {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-	};
-
-	cpu-pmu {
-		compatible = "qcom,krait-pmu";
-		interrupts = <1 10 0x304>;
-	};
-
-	clocks {
-		cxo_board: cxo_board {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <19200000>;
-		};
-
-		pxo_board: pxo_board {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <27000000>;
-		};
-
-		sleep_clk: sleep_clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	sfpb_mutex: hwmutex {
-		compatible = "qcom,sfpb-mutex";
-		syscon = <&sfpb_wrapper_mutex 0x604 0x4>;
-		#hwlock-cells = <1>;
-	};
-
-	smem {
-		compatible = "qcom,smem";
-		memory-region = <&smem_region>;
-
-		hwlocks = <&sfpb_mutex 3>;
-	};
-
-	smd {
-		compatible = "qcom,smd";
-
-		modem@0 {
-			interrupts = <0 37 IRQ_TYPE_EDGE_RISING>;
-
-			qcom,ipc = <&l2cc 8 3>;
-			qcom,smd-edge = <0>;
-
-			status = "disabled";
-		};
-
-		q6@1 {
-			interrupts = <0 90 IRQ_TYPE_EDGE_RISING>;
-
-			qcom,ipc = <&l2cc 8 15>;
-			qcom,smd-edge = <1>;
-
-			status = "disabled";
-		};
-
-		dsps@3 {
-			interrupts = <0 138 IRQ_TYPE_EDGE_RISING>;
-
-			qcom,ipc = <&sps_sic_non_secure 0x4080 0>;
-			qcom,smd-edge = <3>;
-
-			status = "disabled";
-		};
-
-		riva@6 {
-			interrupts = <0 198 IRQ_TYPE_EDGE_RISING>;
-
-			qcom,ipc = <&l2cc 8 25>;
-			qcom,smd-edge = <6>;
-
-			status = "disabled";
-		};
-	};
-
-	smsm {
-		compatible = "qcom,smsm";
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		qcom,ipc-1 = <&l2cc 8 4>;
-		qcom,ipc-2 = <&l2cc 8 14>;
-		qcom,ipc-3 = <&l2cc 8 23>;
-		qcom,ipc-4 = <&sps_sic_non_secure 0x4094 0>;
-
-		apps_smsm: apps@0 {
-			reg = <0>;
-			#qcom,smem-state-cells = <1>;
-		};
-
-		modem_smsm: modem@1 {
-			reg = <1>;
-			interrupts = <0 38 IRQ_TYPE_EDGE_RISING>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		q6_smsm: q6@2 {
-			reg = <2>;
-			interrupts = <0 89 IRQ_TYPE_EDGE_RISING>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		wcnss_smsm: wcnss@3 {
-			reg = <3>;
-			interrupts = <0 204 IRQ_TYPE_EDGE_RISING>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		dsps_smsm: dsps@4 {
-			reg = <4>;
-			interrupts = <0 137 IRQ_TYPE_EDGE_RISING>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-
-	firmware {
-		scm {
-			compatible = "qcom,scm-apq8064";
-
-			clocks = <&rpmcc RPM_DAYTONA_FABRIC_CLK>;
-			clock-names = "core";
-		};
-	};
-
-
-	/*
-	 * These channels from the ADC are simply hardware monitors.
-	 * That is why the ADC is referred to as "HKADC" - HouseKeeping
-	 * ADC.
-	 */
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&xoadc 0x00 0x01>, /* Battery */
-			    <&xoadc 0x00 0x02>, /* DC in (charger) */
-			    <&xoadc 0x00 0x04>, /* VPH the main system voltage */
-			    <&xoadc 0x00 0x0b>, /* Die temperature */
-			    <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
-			    <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
-			    <&xoadc 0x00 0x0e>; /* Charger temperature */
-	};
-
-	soc: soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		compatible = "simple-bus";
-
-		tlmm_pinmux: pinctrl@800000 {
-			compatible = "qcom,apq8064-pinctrl";
-			reg = <0x800000 0x4000>;
-
-			gpio-controller;
-			gpio-ranges = <&tlmm_pinmux 0 0 90>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <0 16 IRQ_TYPE_LEVEL_HIGH>;
-
-			pinctrl-names = "default";
-			pinctrl-0 = <&ps_hold>;
-		};
-
-		sfpb_wrapper_mutex: syscon@1200000 {
-			compatible = "syscon";
-			reg = <0x01200000 0x8000>;
-		};
-
-		intc: interrupt-controller@2000000 {
-			compatible = "qcom,msm-qgic2";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = <0x02000000 0x1000>,
-			      <0x02002000 0x1000>;
-		};
-
-		timer@200a000 {
-			compatible = "qcom,kpss-timer",
-				     "qcom,kpss-wdt-apq8064", "qcom,msm-timer";
-			interrupts = <1 1 0x301>,
-				     <1 2 0x301>,
-				     <1 3 0x301>;
-			reg = <0x0200a000 0x100>;
-			clock-frequency = <27000000>,
-					  <32768>;
-			cpu-offset = <0x80000>;
-		};
-
-		acc0: clock-controller@2088000 {
-			compatible = "qcom,kpss-acc-v1";
-			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
-		};
-
-		acc1: clock-controller@2098000 {
-			compatible = "qcom,kpss-acc-v1";
-			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
-		};
-
-		acc2: clock-controller@20a8000 {
-			compatible = "qcom,kpss-acc-v1";
-			reg = <0x020a8000 0x1000>, <0x02008000 0x1000>;
-		};
-
-		acc3: clock-controller@20b8000 {
-			compatible = "qcom,kpss-acc-v1";
-			reg = <0x020b8000 0x1000>, <0x02008000 0x1000>;
-		};
-
-		saw0: power-controller@2089000 {
-			compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
-			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
-			regulator;
-		};
-
-		saw1: power-controller@2099000 {
-			compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
-			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
-			regulator;
-		};
-
-		saw2: power-controller@20a9000 {
-			compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
-			reg = <0x020a9000 0x1000>, <0x02009000 0x1000>;
-			regulator;
-		};
-
-		saw3: power-controller@20b9000 {
-			compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
-			reg = <0x020b9000 0x1000>, <0x02009000 0x1000>;
-			regulator;
-		};
-
-		sps_sic_non_secure: sps-sic-non-secure@12100000 {
-			compatible	= "syscon";
-			reg		= <0x12100000 0x10000>;
-		};
-
-		gsbi1: gsbi@12440000 {
-			status = "disabled";
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <1>;
-			reg = <0x12440000 0x100>;
-			clocks = <&gcc GSBI1_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			syscon-tcsr = <&tcsr>;
-
-			gsbi1_serial: serial@12450000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x12450000 0x100>,
-				      <0x12400000 0x03>;
-				interrupts = <0 193 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-
-			gsbi1_i2c: i2c@12460000 {
-				compatible = "qcom,i2c-qup-v1.1.1";
-				pinctrl-0 = <&i2c1_pins>;
-				pinctrl-1 = <&i2c1_pins_sleep>;
-				pinctrl-names = "default", "sleep";
-				reg = <0x12460000 0x1000>;
-				interrupts = <0 194 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
-				clock-names = "core", "iface";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-		};
-
-		gsbi2: gsbi@12480000 {
-			status = "disabled";
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <2>;
-			reg = <0x12480000 0x100>;
-			clocks = <&gcc GSBI2_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			syscon-tcsr = <&tcsr>;
-
-			gsbi2_i2c: i2c@124a0000 {
-				compatible = "qcom,i2c-qup-v1.1.1";
-				reg = <0x124a0000 0x1000>;
-				pinctrl-0 = <&i2c2_pins>;
-				pinctrl-1 = <&i2c2_pins_sleep>;
-				pinctrl-names = "default", "sleep";
-				interrupts = <0 196 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
-				clock-names = "core", "iface";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		gsbi3: gsbi@16200000 {
-			status = "disabled";
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <3>;
-			reg = <0x16200000 0x100>;
-			clocks = <&gcc GSBI3_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			gsbi3_i2c: i2c@16280000 {
-				compatible = "qcom,i2c-qup-v1.1.1";
-				pinctrl-0 = <&i2c3_pins>;
-				pinctrl-1 = <&i2c3_pins_sleep>;
-				pinctrl-names = "default", "sleep";
-				reg = <0x16280000 0x1000>;
-				interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI3_QUP_CLK>,
-					 <&gcc GSBI3_H_CLK>;
-				clock-names = "core", "iface";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		gsbi4: gsbi@16300000 {
-			status = "disabled";
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <4>;
-			reg = <0x16300000 0x03>;
-			clocks = <&gcc GSBI4_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			gsbi4_i2c: i2c@16380000 {
-				compatible = "qcom,i2c-qup-v1.1.1";
-				pinctrl-0 = <&i2c4_pins>;
-				pinctrl-1 = <&i2c4_pins_sleep>;
-				pinctrl-names = "default", "sleep";
-				reg = <0x16380000 0x1000>;
-				interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI4_QUP_CLK>,
-					 <&gcc GSBI4_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-		};
-
-		gsbi5: gsbi@1a200000 {
-			status = "disabled";
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <5>;
-			reg = <0x1a200000 0x03>;
-			clocks = <&gcc GSBI5_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			gsbi5_serial: serial@1a240000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x1a240000 0x100>,
-				      <0x1a200000 0x03>;
-				interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-
-			gsbi5_spi: spi@1a280000 {
-				compatible = "qcom,spi-qup-v1.1.1";
-				reg = <0x1a280000 0x1000>;
-				interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
-				pinctrl-0 = <&spi5_default>;
-				pinctrl-1 = <&spi5_sleep>;
-				pinctrl-names = "default", "sleep";
-				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-
-		gsbi6: gsbi@16500000 {
-			status = "disabled";
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <6>;
-			reg = <0x16500000 0x03>;
-			clocks = <&gcc GSBI6_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			gsbi6_serial: serial@16540000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x16540000 0x100>,
-				      <0x16500000 0x03>;
-				interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-
-			gsbi6_i2c: i2c@16580000 {
-				compatible = "qcom,i2c-qup-v1.1.1";
-				pinctrl-0 = <&i2c6_pins>;
-				pinctrl-1 = <&i2c6_pins_sleep>;
-				pinctrl-names = "default", "sleep";
-				reg = <0x16580000 0x1000>;
-				interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI6_QUP_CLK>,
-					 <&gcc GSBI6_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-		};
-
-		gsbi7: gsbi@16600000 {
-			status = "disabled";
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <7>;
-			reg = <0x16600000 0x100>;
-			clocks = <&gcc GSBI7_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			syscon-tcsr = <&tcsr>;
-
-			gsbi7_serial: serial@16640000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x16640000 0x1000>,
-				      <0x16600000 0x1000>;
-				interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-
-			gsbi7_i2c: i2c@16680000 {
-				compatible = "qcom,i2c-qup-v1.1.1";
-				pinctrl-0 = <&i2c7_pins>;
-				pinctrl-1 = <&i2c7_pins_sleep>;
-				pinctrl-names = "default", "sleep";
-				reg = <0x16680000 0x1000>;
-				interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI7_QUP_CLK>,
-					 <&gcc GSBI7_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-		};
-
-		rng@1a500000 {
-			compatible = "qcom,prng";
-			reg = <0x1a500000 0x200>;
-			clocks = <&gcc PRNG_CLK>;
-			clock-names = "core";
-		};
-
-		ssbi@c00000 {
-			compatible = "qcom,ssbi";
-			reg = <0x00c00000 0x1000>;
-			qcom,controller-type = "pmic-arbiter";
-
-			pm8821: pmic@1 {
-				compatible = "qcom,pm8821";
-				interrupt-parent = <&tlmm_pinmux>;
-				interrupts = <76 IRQ_TYPE_LEVEL_LOW>;
-				#interrupt-cells = <2>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pm8821_mpps: mpps@50 {
-					compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp";
-					reg = <0x50>;
-					interrupts = <24 IRQ_TYPE_NONE>,
-						     <25 IRQ_TYPE_NONE>,
-						     <26 IRQ_TYPE_NONE>,
-						     <27 IRQ_TYPE_NONE>;
-					gpio-controller;
-					#gpio-cells = <2>;
-				};
-			};
-		};
-
-		qcom,ssbi@500000 {
-			compatible = "qcom,ssbi";
-			reg = <0x00500000 0x1000>;
-			qcom,controller-type = "pmic-arbiter";
-
-			pmicintc: pmic@0 {
-				compatible = "qcom,pm8921";
-				interrupt-parent = <&tlmm_pinmux>;
-				interrupts = <74 8>;
-				#interrupt-cells = <2>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pm8921_gpio: gpio@150 {
-
-					compatible = "qcom,pm8921-gpio",
-						     "qcom,ssbi-gpio";
-					reg = <0x150>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					gpio-controller;
-					gpio-ranges = <&pm8921_gpio 0 0 44>;
-					#gpio-cells = <2>;
-
-				};
-
-				pm8921_mpps: mpps@50 {
-					compatible = "qcom,pm8921-mpp",
-						     "qcom,ssbi-mpp";
-					reg = <0x50>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupts =
-					<128 IRQ_TYPE_NONE>,
-					<129 IRQ_TYPE_NONE>,
-					<130 IRQ_TYPE_NONE>,
-					<131 IRQ_TYPE_NONE>,
-					<132 IRQ_TYPE_NONE>,
-					<133 IRQ_TYPE_NONE>,
-					<134 IRQ_TYPE_NONE>,
-					<135 IRQ_TYPE_NONE>,
-					<136 IRQ_TYPE_NONE>,
-					<137 IRQ_TYPE_NONE>,
-					<138 IRQ_TYPE_NONE>,
-					<139 IRQ_TYPE_NONE>;
-				};
-
-				rtc@11d {
-					compatible = "qcom,pm8921-rtc";
-					interrupt-parent = <&pmicintc>;
-					interrupts = <39 1>;
-					reg = <0x11d>;
-					allow-set-time;
-				};
-
-				pwrkey@1c {
-					compatible = "qcom,pm8921-pwrkey";
-					reg = <0x1c>;
-					interrupt-parent = <&pmicintc>;
-					interrupts = <50 1>, <51 1>;
-					debounce = <15625>;
-					pull-up;
-				};
-
-				xoadc: xoadc@197 {
-					compatible = "qcom,pm8921-adc";
-					reg = <197>;
-					interrupts-extended = <&pmicintc 78 IRQ_TYPE_EDGE_RISING>;
-					#address-cells = <2>;
-					#size-cells = <0>;
-					#io-channel-cells = <2>;
-
-					vcoin: adc-channel@0 {
-						reg = <0x00 0x00>;
-					};
-					vbat: adc-channel@1 {
-						reg = <0x00 0x01>;
-					};
-					dcin: adc-channel@2 {
-						reg = <0x00 0x02>;
-					};
-					vph_pwr: adc-channel@4 {
-						reg = <0x00 0x04>;
-					};
-					batt_therm: adc-channel@8 {
-						reg = <0x00 0x08>;
-					};
-					batt_id: adc-channel@9 {
-						reg = <0x00 0x09>;
-					};
-					usb_vbus: adc-channel@a {
-						reg = <0x00 0x0a>;
-					};
-					die_temp: adc-channel@b {
-						reg = <0x00 0x0b>;
-					};
-					ref_625mv: adc-channel@c {
-						reg = <0x00 0x0c>;
-					};
-					ref_1250mv: adc-channel@d {
-						reg = <0x00 0x0d>;
-					};
-					chg_temp: adc-channel@e {
-						reg = <0x00 0x0e>;
-					};
-					ref_muxoff: adc-channel@f {
-						reg = <0x00 0x0f>;
-					};
-				};
-			};
-		};
-
-		qfprom: qfprom@700000 {
-			compatible	= "qcom,qfprom";
-			reg		= <0x00700000 0x1000>;
-			#address-cells	= <1>;
-			#size-cells	= <1>;
-			ranges;
-			tsens_calib: calib {
-				reg = <0x404 0x10>;
-			};
-			tsens_backup: backup_calib {
-				reg = <0x414 0x10>;
-			};
-		};
-
-		gcc: clock-controller@900000 {
-			compatible = "qcom,gcc-apq8064";
-			reg = <0x00900000 0x4000>;
-			nvmem-cells = <&tsens_calib>, <&tsens_backup>;
-			nvmem-cell-names = "calib", "calib_backup";
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#thermal-sensor-cells = <1>;
-		};
-
-		lcc: clock-controller@28000000 {
-			compatible = "qcom,lcc-apq8064";
-			reg = <0x28000000 0x1000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-		};
-
-		mmcc: clock-controller@4000000 {
-			compatible = "qcom,mmcc-apq8064";
-			reg = <0x4000000 0x1000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-		};
-
-		l2cc: clock-controller@2011000 {
-			compatible	= "syscon";
-			reg		= <0x2011000 0x1000>;
-		};
-
-		rpm@108000 {
-			compatible	= "qcom,rpm-apq8064";
-			reg		= <0x108000 0x1000>;
-			qcom,ipc	= <&l2cc 0x8 2>;
-
-			interrupts	= <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
-					  <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
-					  <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names	= "ack", "err", "wakeup";
-
-			rpmcc: clock-controller {
-				compatible	= "qcom,rpmcc-apq8064", "qcom,rpmcc";
-				#clock-cells = <1>;
-			};
-
-			regulators {
-				compatible = "qcom,rpm-pm8921-regulators";
-
-				pm8921_s1: s1 {};
-				pm8921_s2: s2 {};
-				pm8921_s3: s3 {};
-				pm8921_s4: s4 {};
-				pm8921_s7: s7 {};
-				pm8921_s8: s8 {};
-
-				pm8921_l1: l1 {};
-				pm8921_l2: l2 {};
-				pm8921_l3: l3 {};
-				pm8921_l4: l4 {};
-				pm8921_l5: l5 {};
-				pm8921_l6: l6 {};
-				pm8921_l7: l7 {};
-				pm8921_l8: l8 {};
-				pm8921_l9: l9 {};
-				pm8921_l10: l10 {};
-				pm8921_l11: l11 {};
-				pm8921_l12: l12 {};
-				pm8921_l14: l14 {};
-				pm8921_l15: l15 {};
-				pm8921_l16: l16 {};
-				pm8921_l17: l17 {};
-				pm8921_l18: l18 {};
-				pm8921_l21: l21 {};
-				pm8921_l22: l22 {};
-				pm8921_l23: l23 {};
-				pm8921_l24: l24 {};
-				pm8921_l25: l25 {};
-				pm8921_l26: l26 {};
-				pm8921_l27: l27 {};
-				pm8921_l28: l28 {};
-				pm8921_l29: l29 {};
-
-				pm8921_lvs1: lvs1 {};
-				pm8921_lvs2: lvs2 {};
-				pm8921_lvs3: lvs3 {};
-				pm8921_lvs4: lvs4 {};
-				pm8921_lvs5: lvs5 {};
-				pm8921_lvs6: lvs6 {};
-				pm8921_lvs7: lvs7 {};
-
-				pm8921_usb_switch: usb-switch {};
-
-				pm8921_hdmi_switch: hdmi-switch {
-					bias-pull-down;
-				};
-
-				pm8921_ncp: ncp {};
-			};
-		};
-
-		usb1: usb@12500000 {
-			compatible = "qcom,ci-hdrc";
-			reg = <0x12500000 0x200>,
-			      <0x12500200 0x200>;
-			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc USB_HS1_XCVR_CLK>, <&gcc USB_HS1_H_CLK>;
-			clock-names = "core", "iface";
-			assigned-clocks = <&gcc USB_HS1_XCVR_CLK>;
-			assigned-clock-rates = <60000000>;
-			resets = <&gcc USB_HS1_RESET>;
-			reset-names = "core";
-			phy_type = "ulpi";
-			ahb-burst-config = <0>;
-			phys = <&usb_hs1_phy>;
-			phy-names = "usb-phy";
-			status = "disabled";
-			#reset-cells = <1>;
-
-			ulpi {
-				usb_hs1_phy: phy {
-					compatible = "qcom,usb-hs-phy-apq8064",
-						     "qcom,usb-hs-phy";
-					clocks = <&sleep_clk>, <&cxo_board>;
-					clock-names = "sleep", "ref";
-					resets = <&usb1 0>;
-					reset-names = "por";
-					#phy-cells = <0>;
-				};
-			};
-		};
-
-		usb3: usb@12520000 {
-			compatible = "qcom,ci-hdrc";
-			reg = <0x12520000 0x200>,
-			      <0x12520200 0x200>;
-			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc USB_HS3_XCVR_CLK>, <&gcc USB_HS3_H_CLK>;
-			clock-names = "core", "iface";
-			assigned-clocks = <&gcc USB_HS3_XCVR_CLK>;
-			assigned-clock-rates = <60000000>;
-			resets = <&gcc USB_HS3_RESET>;
-			reset-names = "core";
-			phy_type = "ulpi";
-			ahb-burst-config = <0>;
-			phys = <&usb_hs3_phy>;
-			phy-names = "usb-phy";
-			status = "disabled";
-			#reset-cells = <1>;
-
-			ulpi {
-				usb_hs3_phy: phy {
-					compatible = "qcom,usb-hs-phy-apq8064",
-						     "qcom,usb-hs-phy";
-					#phy-cells = <0>;
-					clocks = <&sleep_clk>, <&cxo_board>;
-					clock-names = "sleep", "ref";
-					resets = <&usb3 0>;
-					reset-names = "por";
-				};
-			};
-		};
-
-		usb4: usb@12530000 {
-			compatible = "qcom,ci-hdrc";
-			reg = <0x12530000 0x200>,
-			      <0x12530200 0x200>;
-			interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc USB_HS4_XCVR_CLK>, <&gcc USB_HS4_H_CLK>;
-			clock-names = "core", "iface";
-			assigned-clocks = <&gcc USB_HS4_XCVR_CLK>;
-			assigned-clock-rates = <60000000>;
-			resets = <&gcc USB_HS4_RESET>;
-			reset-names = "core";
-			phy_type = "ulpi";
-			ahb-burst-config = <0>;
-			phys = <&usb_hs4_phy>;
-			phy-names = "usb-phy";
-			status = "disabled";
-			#reset-cells = <1>;
-
-			ulpi {
-				usb_hs4_phy: phy {
-					compatible = "qcom,usb-hs-phy-apq8064",
-						     "qcom,usb-hs-phy";
-					#phy-cells = <0>;
-					clocks = <&sleep_clk>, <&cxo_board>;
-					clock-names = "sleep", "ref";
-					resets = <&usb4 0>;
-					reset-names = "por";
-				};
-			};
-		};
-
-		sata_phy0: phy@1b400000 {
-			compatible	= "qcom,apq8064-sata-phy";
-			status		= "disabled";
-			reg		= <0x1b400000 0x200>;
-			reg-names	= "phy_mem";
-			clocks		= <&gcc SATA_PHY_CFG_CLK>;
-			clock-names	= "cfg";
-			#phy-cells	= <0>;
-		};
-
-		sata0: sata@29000000 {
-			compatible		= "qcom,apq8064-ahci", "generic-ahci";
-			status			= "disabled";
-			reg			= <0x29000000 0x180>;
-			interrupts		= <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
-
-			clocks			= <&gcc SFAB_SATA_S_H_CLK>,
-						<&gcc SATA_H_CLK>,
-						<&gcc SATA_A_CLK>,
-						<&gcc SATA_RXOOB_CLK>,
-						<&gcc SATA_PMALIVE_CLK>;
-			clock-names		= "slave_iface",
-						"iface",
-						"bus",
-						"rxoob",
-						"core_pmalive";
-
-			assigned-clocks		= <&gcc SATA_RXOOB_CLK>,
-						<&gcc SATA_PMALIVE_CLK>;
-			assigned-clock-rates	= <100000000>, <100000000>;
-
-			phys			= <&sata_phy0>;
-			phy-names		= "sata-phy";
-			ports-implemented	= <0x1>;
-		};
-
-		/* Temporary fixed regulator */
-		sdcc1bam:dma@12402000{
-			compatible = "qcom,bam-v1.3.0";
-			reg = <0x12402000 0x8000>;
-			interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc SDC1_H_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-		};
-
-		sdcc3bam:dma@12182000{
-			compatible = "qcom,bam-v1.3.0";
-			reg = <0x12182000 0x8000>;
-			interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc SDC3_H_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-		};
-
-		sdcc4bam:dma@121c2000{
-			compatible = "qcom,bam-v1.3.0";
-			reg = <0x121c2000 0x8000>;
-			interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc SDC4_H_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-		};
-
-		amba {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			sdcc1: sdcc@12400000 {
-				status		= "disabled";
-				compatible	= "arm,pl18x", "arm,primecell";
-				pinctrl-names	= "default";
-				pinctrl-0	= <&sdcc1_pins>;
-				arm,primecell-periphid = <0x00051180>;
-				reg		= <0x12400000 0x2000>;
-				interrupts	= <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names	= "cmd_irq";
-				clocks		= <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
-				clock-names	= "mclk", "apb_pclk";
-				bus-width	= <8>;
-				max-frequency	= <96000000>;
-				non-removable;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
-				dma-names = "tx", "rx";
-			};
-
-			sdcc3: sdcc@12180000 {
-				compatible	= "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				status		= "disabled";
-				reg		= <0x12180000 0x2000>;
-				interrupts	= <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names	= "cmd_irq";
-				clocks		= <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
-				clock-names	= "mclk", "apb_pclk";
-				bus-width	= <4>;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				max-frequency	= <192000000>;
-				no-1-8-v;
-				dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
-				dma-names = "tx", "rx";
-			};
-
-			sdcc4: sdcc@121c0000 {
-				compatible	= "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				status		= "disabled";
-				reg		= <0x121c0000 0x2000>;
-				interrupts	= <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names	= "cmd_irq";
-				clocks		= <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
-				clock-names	= "mclk", "apb_pclk";
-				bus-width	= <4>;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				max-frequency	= <48000000>;
-				dmas = <&sdcc4bam 2>, <&sdcc4bam 1>;
-				dma-names = "tx", "rx";
-				pinctrl-names = "default";
-				pinctrl-0 = <&sdc4_gpios>;
-			};
-		};
-
-		tcsr: syscon@1a400000 {
-			compatible = "qcom,tcsr-apq8064", "syscon";
-			reg = <0x1a400000 0x100>;
-		};
-
-		gpu: adreno-3xx@4300000 {
-			compatible = "qcom,adreno-320.2", "qcom,adreno";
-			reg = <0x04300000 0x20000>;
-			reg-names = "kgsl_3d0_reg_memory";
-			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "kgsl_3d0_irq";
-			clock-names =
-			    "core",
-			    "iface",
-			    "mem",
-			    "mem_iface";
-			clocks =
-			    <&mmcc GFX3D_CLK>,
-			    <&mmcc GFX3D_AHB_CLK>,
-			    <&mmcc GFX3D_AXI_CLK>,
-			    <&mmcc MMSS_IMEM_AHB_CLK>;
-
-			iommus = <&gfx3d 0
-				  &gfx3d 1
-				  &gfx3d 2
-				  &gfx3d 3
-				  &gfx3d 4
-				  &gfx3d 5
-				  &gfx3d 6
-				  &gfx3d 7
-				  &gfx3d 8
-				  &gfx3d 9
-				  &gfx3d 10
-				  &gfx3d 11
-				  &gfx3d 12
-				  &gfx3d 13
-				  &gfx3d 14
-				  &gfx3d 15
-				  &gfx3d 16
-				  &gfx3d 17
-				  &gfx3d 18
-				  &gfx3d 19
-				  &gfx3d 20
-				  &gfx3d 21
-				  &gfx3d 22
-				  &gfx3d 23
-				  &gfx3d 24
-				  &gfx3d 25
-				  &gfx3d 26
-				  &gfx3d 27
-				  &gfx3d 28
-				  &gfx3d 29
-				  &gfx3d 30
-				  &gfx3d 31
-				  &gfx3d1 0
-				  &gfx3d1 1
-				  &gfx3d1 2
-				  &gfx3d1 3
-				  &gfx3d1 4
-				  &gfx3d1 5
-				  &gfx3d1 6
-				  &gfx3d1 7
-				  &gfx3d1 8
-				  &gfx3d1 9
-				  &gfx3d1 10
-				  &gfx3d1 11
-				  &gfx3d1 12
-				  &gfx3d1 13
-				  &gfx3d1 14
-				  &gfx3d1 15
-				  &gfx3d1 16
-				  &gfx3d1 17
-				  &gfx3d1 18
-				  &gfx3d1 19
-				  &gfx3d1 20
-				  &gfx3d1 21
-				  &gfx3d1 22
-				  &gfx3d1 23
-				  &gfx3d1 24
-				  &gfx3d1 25
-				  &gfx3d1 26
-				  &gfx3d1 27
-				  &gfx3d1 28
-				  &gfx3d1 29
-				  &gfx3d1 30
-				  &gfx3d1 31>;
-
-			qcom,gpu-pwrlevels {
-				compatible = "qcom,gpu-pwrlevels";
-				qcom,gpu-pwrlevel@0 {
-					qcom,gpu-freq = <450000000>;
-				};
-				qcom,gpu-pwrlevel@1 {
-					qcom,gpu-freq = <27000000>;
-				};
-			};
-		};
-
-		mmss_sfpb: syscon@5700000 {
-			compatible = "syscon";
-			reg = <0x5700000 0x70>;
-		};
-
-		dsi0: mdss_dsi@4700000 {
-			compatible = "qcom,mdss-dsi-ctrl";
-			label = "MDSS DSI CTRL->0";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-			reg = <0x04700000 0x200>;
-			reg-names = "dsi_ctrl";
-
-			clocks = <&mmcc DSI_M_AHB_CLK>,
-				<&mmcc DSI_S_AHB_CLK>,
-				<&mmcc AMP_AHB_CLK>,
-				<&mmcc DSI_CLK>,
-				<&mmcc DSI1_BYTE_CLK>,
-				<&mmcc DSI_PIXEL_CLK>,
-				<&mmcc DSI1_ESC_CLK>;
-			clock-names = "iface", "bus", "core_mmss",
-					"src", "byte", "pixel",
-					"core";
-
-			assigned-clocks = <&mmcc DSI1_BYTE_SRC>,
-					<&mmcc DSI1_ESC_SRC>,
-					<&mmcc DSI_SRC>,
-					<&mmcc DSI_PIXEL_SRC>;
-			assigned-clock-parents = <&dsi0_phy 0>,
-						<&dsi0_phy 0>,
-						<&dsi0_phy 1>,
-						<&dsi0_phy 1>;
-			syscon-sfpb = <&mmss_sfpb>;
-			phys = <&dsi0_phy>;
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					dsi0_in: endpoint {
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-					dsi0_out: endpoint {
-					};
-				};
-			};
-		};
-
-
-		dsi0_phy: dsi-phy@4700200 {
-			compatible = "qcom,dsi-phy-28nm-8960";
-			#clock-cells = <1>;
-			#phy-cells = <0>;
-
-			reg = <0x04700200 0x100>,
-				<0x04700300 0x200>,
-				<0x04700500 0x5c>;
-			reg-names = "dsi_pll", "dsi_phy", "dsi_phy_regulator";
-			clock-names = "iface_clk", "ref";
-			clocks = <&mmcc DSI_M_AHB_CLK>,
-				 <&pxo_board>;
-		};
-
-
-		mdp_port0: iommu@7500000 {
-			compatible = "qcom,apq8064-iommu";
-			#iommu-cells = <1>;
-			clock-names =
-			    "smmu_pclk",
-			    "iommu_clk";
-			clocks =
-			    <&mmcc SMMU_AHB_CLK>,
-			    <&mmcc MDP_AXI_CLK>;
-			reg = <0x07500000 0x100000>;
-			interrupts =
-			    <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
-			    <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,ncb = <2>;
-		};
-
-		mdp_port1: iommu@7600000 {
-			compatible = "qcom,apq8064-iommu";
-			#iommu-cells = <1>;
-			clock-names =
-			    "smmu_pclk",
-			    "iommu_clk";
-			clocks =
-			    <&mmcc SMMU_AHB_CLK>,
-			    <&mmcc MDP_AXI_CLK>;
-			reg = <0x07600000 0x100000>;
-			interrupts =
-			    <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
-			    <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,ncb = <2>;
-		};
-
-		gfx3d: iommu@7c00000 {
-			compatible = "qcom,apq8064-iommu";
-			#iommu-cells = <1>;
-			clock-names =
-			    "smmu_pclk",
-			    "iommu_clk";
-			clocks =
-			    <&mmcc SMMU_AHB_CLK>,
-			    <&mmcc GFX3D_AXI_CLK>;
-			reg = <0x07c00000 0x100000>;
-			interrupts =
-			    <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
-			    <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,ncb = <3>;
-		};
-
-		gfx3d1: iommu@7d00000 {
-			compatible = "qcom,apq8064-iommu";
-			#iommu-cells = <1>;
-			clock-names =
-			    "smmu_pclk",
-			    "iommu_clk";
-			clocks =
-			    <&mmcc SMMU_AHB_CLK>,
-			    <&mmcc GFX3D_AXI_CLK>;
-			reg = <0x07d00000 0x100000>;
-			interrupts =
-			    <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
-			    <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,ncb = <3>;
-		};
-
-		pcie: pci@1b500000 {
-			compatible = "qcom,pcie-apq8064", "snps,dw-pcie";
-			reg = <0x1b500000 0x1000
-			       0x1b502000 0x80
-			       0x1b600000 0x100
-			       0x0ff00000 0x100000>;
-			reg-names = "dbi", "elbi", "parf", "config";
-			device_type = "pci";
-			linux,pci-domain = <0>;
-			bus-range = <0x00 0xff>;
-			num-lanes = <1>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-			ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000   /* I/O */
-				  0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* memory */
-			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-			clocks = <&gcc PCIE_A_CLK>,
-				 <&gcc PCIE_H_CLK>,
-				 <&gcc PCIE_PHY_REF_CLK>;
-			clock-names = "core", "iface", "phy";
-			resets = <&gcc PCIE_ACLK_RESET>,
-				 <&gcc PCIE_HCLK_RESET>,
-				 <&gcc PCIE_POR_RESET>,
-				 <&gcc PCIE_PCI_RESET>,
-				 <&gcc PCIE_PHY_RESET>;
-			reset-names = "axi", "ahb", "por", "pci", "phy";
-			status = "disabled";
-		};
-
-		hdmi: hdmi-tx@4a00000 {
-			compatible = "qcom,hdmi-tx-8960";
-			pinctrl-names = "default";
-			pinctrl-0 = <&hdmi_pinctrl>;
-			reg = <0x04a00000 0x2f0>;
-			reg-names = "core_physical";
-			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&mmcc HDMI_APP_CLK>,
-				 <&mmcc HDMI_M_AHB_CLK>,
-				 <&mmcc HDMI_S_AHB_CLK>;
-			clock-names = "core_clk",
-				      "master_iface_clk",
-				      "slave_iface_clk";
-
-			phys = <&hdmi_phy>;
-			phy-names = "hdmi-phy";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					hdmi_in: endpoint {
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-					hdmi_out: endpoint {
-					};
-				};
-			};
-		};
-
-		hdmi_phy: hdmi-phy@4a00400 {
-			compatible = "qcom,hdmi-phy-8960";
-			reg = <0x4a00400 0x60>,
-			      <0x4a00500 0x100>;
-			reg-names = "hdmi_phy",
-				    "hdmi_pll";
-
-			clocks = <&mmcc HDMI_S_AHB_CLK>;
-			clock-names = "slave_iface_clk";
-			#phy-cells = <0>;
-		};
-
-		mdp: mdp@5100000 {
-			compatible = "qcom,mdp4";
-			reg = <0x05100000 0xf0000>;
-			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&mmcc MDP_CLK>,
-				 <&mmcc MDP_AHB_CLK>,
-				 <&mmcc MDP_AXI_CLK>,
-				 <&mmcc MDP_LUT_CLK>,
-				 <&mmcc HDMI_TV_CLK>,
-				 <&mmcc MDP_TV_CLK>;
-			clock-names = "core_clk",
-				      "iface_clk",
-				      "bus_clk",
-				      "lut_clk",
-				      "hdmi_clk",
-				      "tv_clk";
-
-			iommus = <&mdp_port0 0
-				  &mdp_port0 2
-				  &mdp_port1 0
-				  &mdp_port1 2>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					mdp_lvds_out: endpoint {
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-					mdp_dsi1_out: endpoint {
-					};
-				};
-
-				port@2 {
-					reg = <2>;
-					mdp_dsi2_out: endpoint {
-					};
-				};
-
-				port@3 {
-					reg = <3>;
-					mdp_dtv_out: endpoint {
-					};
-				};
-			};
-		};
-
-		riva: riva-pil@3204000 {
-			compatible = "qcom,riva-pil";
-
-			reg = <0x03200800 0x1000>, <0x03202000 0x2000>, <0x03204000 0x100>;
-			reg-names = "ccu", "dxe", "pmu";
-
-			interrupts-extended = <&intc GIC_SPI 199 IRQ_TYPE_EDGE_RISING>,
-					      <&wcnss_smsm 6 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal";
-
-			memory-region = <&wcnss_mem>;
-
-			vddcx-supply = <&pm8921_s3>;
-			vddmx-supply = <&pm8921_l24>;
-			vddpx-supply = <&pm8921_s4>;
-
-			status = "disabled";
-
-			iris {
-				compatible = "qcom,wcn3660";
-
-				clocks = <&cxo_board>;
-				clock-names = "xo";
-
-				vddxo-supply = <&pm8921_l4>;
-				vddrfa-supply = <&pm8921_s2>;
-				vddpa-supply = <&pm8921_l10>;
-				vdddig-supply = <&pm8921_lvs2>;
-			};
-
-			smd-edge {
-				interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>;
-
-				qcom,ipc = <&l2cc 8 25>;
-				qcom,smd-edge = <6>;
-
-				label = "riva";
-
-				wcnss {
-					compatible = "qcom,wcnss";
-					qcom,smd-channels = "WCNSS_CTRL";
-
-					qcom,mmio = <&riva>;
-
-					bt {
-						compatible = "qcom,wcnss-bt";
-					};
-
-					wifi {
-						compatible = "qcom,wcnss-wlan";
-
-						interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
-							     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
-						interrupt-names = "tx", "rx";
-
-						qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
-						qcom,smem-state-names = "tx-enable", "tx-rings-empty";
-					};
-				};
-			};
-		};
-
-		etb@1a01000 {
-			compatible = "coresight-etb10", "arm,primecell";
-			reg = <0x1a01000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>;
-			clock-names = "apb_pclk";
-
-			in-ports {
-				port {
-					etb_in: endpoint {
-						remote-endpoint = <&replicator_out0>;
-					};
-				};
-			};
-		};
-
-		tpiu@1a03000 {
-			compatible = "arm,coresight-tpiu", "arm,primecell";
-			reg = <0x1a03000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>;
-			clock-names = "apb_pclk";
-
-			in-ports {
-				port {
-					tpiu_in: endpoint {
-						remote-endpoint = <&replicator_out1>;
-					};
-				};
-			};
-		};
-
-		replicator {
-			compatible = "arm,coresight-static-replicator";
-
-			clocks = <&rpmcc RPM_QDSS_CLK>;
-			clock-names = "apb_pclk";
-
-			out-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					replicator_out0: endpoint {
-						remote-endpoint = <&etb_in>;
-					};
-				};
-				port@1 {
-					reg = <1>;
-					replicator_out1: endpoint {
-						remote-endpoint = <&tpiu_in>;
-					};
-				};
-			};
-
-			in-ports {
-				port {
-					replicator_in: endpoint {
-						remote-endpoint = <&funnel_out>;
-					};
-				};
-			};
-		};
-
-		funnel@1a04000 {
-			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0x1a04000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>;
-			clock-names = "apb_pclk";
-
-			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				/*
-				 * Not described input ports:
-				 * 2 - connected to STM component
-				 * 3 - not-connected
-				 * 6 - not-connected
-				 * 7 - not-connected
-				 */
-				port@0 {
-					reg = <0>;
-					funnel_in0: endpoint {
-						remote-endpoint = <&etm0_out>;
-					};
-				};
-				port@1 {
-					reg = <1>;
-					funnel_in1: endpoint {
-						remote-endpoint = <&etm1_out>;
-					};
-				};
-				port@4 {
-					reg = <4>;
-					funnel_in4: endpoint {
-						remote-endpoint = <&etm2_out>;
-					};
-				};
-				port@5 {
-					reg = <5>;
-					funnel_in5: endpoint {
-						remote-endpoint = <&etm3_out>;
-					};
-				};
-			};
-
-			out-ports {
-				port {
-					funnel_out: endpoint {
-						remote-endpoint = <&replicator_in>;
-					};
-				};
-			};
-		};
-
-		etm@1a1c000 {
-			compatible = "arm,coresight-etm3x", "arm,primecell";
-			reg = <0x1a1c000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>;
-			clock-names = "apb_pclk";
-
-			cpu = <&CPU0>;
-
-			out-ports {
-				port {
-					etm0_out: endpoint {
-						remote-endpoint = <&funnel_in0>;
-					};
-				};
-			};
-		};
-
-		etm@1a1d000 {
-			compatible = "arm,coresight-etm3x", "arm,primecell";
-			reg = <0x1a1d000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>;
-			clock-names = "apb_pclk";
-
-			cpu = <&CPU1>;
-
-			out-ports {
-				port {
-					etm1_out: endpoint {
-						remote-endpoint = <&funnel_in1>;
-					};
-				};
-			};
-		};
-
-		etm@1a1e000 {
-			compatible = "arm,coresight-etm3x", "arm,primecell";
-			reg = <0x1a1e000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>;
-			clock-names = "apb_pclk";
-
-			cpu = <&CPU2>;
-
-			out-ports {
-				port {
-					etm2_out: endpoint {
-						remote-endpoint = <&funnel_in4>;
-					};
-				};
-			};
-		};
-
-		etm@1a1f000 {
-			compatible = "arm,coresight-etm3x", "arm,primecell";
-			reg = <0x1a1f000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>;
-			clock-names = "apb_pclk";
-
-			cpu = <&CPU3>;
-
-			out-ports {
-				port {
-					etm3_out: endpoint {
-						remote-endpoint = <&funnel_in5>;
-					};
-				};
-			};
-		};
-	};
-};
-#include "qcom-apq8064-pins.dtsi"
diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
deleted file mode 100644
index 83793b835d40..000000000000
--- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
+++ /dev/null
@@ -1,346 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-msm8974.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
-
-/ {
-	model = "Qualcomm APQ8074 Dragonboard";
-	compatible = "qcom,apq8074-dragonboard", "qcom,apq8074";
-
-	aliases {
-		serial0 = &blsp1_uart2;
-		usid0 = &pm8941_0;
-		usid4 = &pm8841_0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	soc {
-		serial@f991e000 {
-			status = "okay";
-		};
-
-		sdhci@f9824900 {
-			bus-width = <8>;
-			non-removable;
-			status = "okay";
-
-			vmmc-supply = <&pm8941_l20>;
-			vqmmc-supply = <&pm8941_s3>;
-
-			pinctrl-names = "default";
-			pinctrl-0 = <&sdhc1_pin_a>;
-		};
-
-		sdhci@f98a4900 {
-			cd-gpios = <&msmgpio 62 0x1>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>;
-			bus-width = <4>;
-			status = "okay";
-
-			vmmc-supply = <&pm8941_l21>;
-			vqmmc-supply = <&pm8941_l13>;
-		};
-
-		usb@f9a55000 {
-			status = "okay";
-			phys = <&usb_hs2_phy>;
-			phy-select = <&tcsr 0xb000 1>;
-			extcon = <&smbb>, <&usb_id>;
-			vbus-supply = <&chg_otg>;
-			hnp-disable;
-			srp-disable;
-			adp-disable;
-			ulpi {
-				phy@b {
-					status = "okay";
-					v3p3-supply = <&pm8941_l24>;
-					v1p8-supply = <&pm8941_l6>;
-					extcon = <&smbb>;
-					qcom,init-seq = /bits/ 8 <0x1 0x63>;
-				};
-			};
-		};
-
-
-		pinctrl@fd510000 {
-			i2c11_pins: i2c11 {
-				mux {
-					pins = "gpio83", "gpio84";
-					function = "blsp_i2c11";
-				};
-			};
-
-			spi8_default: spi8_default {
-				mosi {
-					pins = "gpio45";
-					function = "blsp_spi8";
-				};
-				miso {
-					pins = "gpio46";
-					function = "blsp_spi8";
-				};
-				cs {
-					pins = "gpio47";
-					function = "blsp_spi8";
-				};
-				clk {
-					pins = "gpio48";
-					function = "blsp_spi8";
-				};
-			};
-
-			sdhc1_pin_a: sdhc1-pin-active {
-				clk {
-					pins = "sdc1_clk";
-					drive-strength = <16>;
-					bias-disable;
-				};
-
-				cmd-data {
-					pins = "sdc1_cmd", "sdc1_data";
-					drive-strength = <10>;
-					bias-pull-up;
-				};
-			};
-
-			sdhc2_cd_pin_a: sdhc2-cd-pin-active {
-				pins = "gpio62";
-				function = "gpio";
-
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			sdhc2_pin_a: sdhc2-pin-active {
-				clk {
-					pins = "sdc2_clk";
-					drive-strength = <10>;
-					bias-disable;
-				};
-
-				cmd-data {
-					pins = "sdc2_cmd", "sdc2_data";
-					drive-strength = <6>;
-					bias-pull-up;
-				};
-			};
-		};
-
-		i2c@f9967000 {
-			status = "okay";
-			clock-frequency = <200000>;
-			pinctrl-0 = <&i2c11_pins>;
-			pinctrl-names = "default";
-
-			eeprom: eeprom@52 {
-				compatible = "atmel,24c128";
-				reg = <0x52>;
-				pagesize = <32>;
-				read-only;
-			};
-		};
-	};
-
-	smd {
-		rpm {
-			rpm_requests {
-				pm8841-regulators {
-					s1 {
-						regulator-min-microvolt = <675000>;
-						regulator-max-microvolt = <1050000>;
-					};
-
-					s2 {
-						regulator-min-microvolt = <500000>;
-						regulator-max-microvolt = <1050000>;
-					};
-
-					s3 {
-						regulator-min-microvolt = <500000>;
-						regulator-max-microvolt = <1050000>;
-					};
-
-					s4 {
-						regulator-min-microvolt = <500000>;
-						regulator-max-microvolt = <1050000>;
-					};
-				};
-
-				pm8941-regulators {
-					vdd_l1_l3-supply = <&pm8941_s1>;
-					vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
-					vdd_l4_l11-supply = <&pm8941_s1>;
-					vdd_l5_l7-supply = <&pm8941_s2>;
-					vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
-					vin_5vs-supply = <&pm8941_5v>;
-
-					s1 {
-						regulator-min-microvolt = <1300000>;
-						regulator-max-microvolt = <1300000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					s2 {
-						regulator-min-microvolt = <2150000>;
-						regulator-max-microvolt = <2150000>;
-						regulator-boot-on;
-					};
-
-					s3 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					l1 {
-						regulator-min-microvolt = <1225000>;
-						regulator-max-microvolt = <1225000>;
-
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					l2 {
-						regulator-min-microvolt = <1200000>;
-						regulator-max-microvolt = <1200000>;
-					};
-
-					l3 {
-						regulator-min-microvolt = <1225000>;
-						regulator-max-microvolt = <1225000>;
-					};
-
-					l4 {
-						regulator-min-microvolt = <1225000>;
-						regulator-max-microvolt = <1225000>;
-					};
-
-					l5 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					l6 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-
-						regulator-boot-on;
-					};
-
-					l7 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-
-						regulator-boot-on;
-					};
-
-					l8 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					l9 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <2950000>;
-					};
-
-					l10 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-						regulator-always-on;
-					};
-
-					l11 {
-						regulator-min-microvolt = <1300000>;
-						regulator-max-microvolt = <1300000>;
-					};
-
-					l12 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					l13 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <2950000>;
-
-						regulator-boot-on;
-					};
-
-					l14 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					l15 {
-						regulator-min-microvolt = <2050000>;
-						regulator-max-microvolt = <2050000>;
-					};
-
-					l16 {
-						regulator-min-microvolt = <2700000>;
-						regulator-max-microvolt = <2700000>;
-					};
-
-					l17 {
-						regulator-min-microvolt = <2700000>;
-						regulator-max-microvolt = <2700000>;
-					};
-
-					l18 {
-						regulator-min-microvolt = <2850000>;
-						regulator-max-microvolt = <2850000>;
-					};
-
-					l19 {
-						regulator-min-microvolt = <3300000>;
-						regulator-max-microvolt = <3300000>;
-						regulator-always-on;
-					};
-
-					l20 {
-						regulator-min-microvolt = <2950000>;
-						regulator-max-microvolt = <2950000>;
-
-						regulator-allow-set-load;
-						regulator-boot-on;
-						regulator-system-load = <200000>;
-					};
-
-					l21 {
-						regulator-min-microvolt = <2950000>;
-						regulator-max-microvolt = <2950000>;
-
-						regulator-boot-on;
-					};
-
-					l22 {
-						regulator-min-microvolt = <3000000>;
-						regulator-max-microvolt = <3000000>;
-					};
-
-					l23 {
-						regulator-min-microvolt = <3000000>;
-						regulator-max-microvolt = <3000000>;
-					};
-
-					l24 {
-						regulator-min-microvolt = <3075000>;
-						regulator-max-microvolt = <3075000>;
-
-						regulator-boot-on;
-					};
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
deleted file mode 100644
index 44cd72f1b1be..000000000000
--- a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8084.dtsi"
-#include "qcom-pma8084.dtsi"
-
-/ {
-	model = "Qualcomm APQ8084/IFC6540";
-	compatible = "qcom,apq8084-sbc", "qcom,apq8084";
-
-	aliases {
-		serial0 = &blsp2_uart2;
-		usid0 = &pma8084_0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	soc {
-		serial@f995e000 {
-			status = "okay";
-		};
-
-		sdhci@f9824900 {
-			bus-width = <8>;
-			non-removable;
-			status = "okay";
-		};
-
-		sdhci@f98a4900 {
-			cd-gpios = <&tlmm 122 GPIO_ACTIVE_LOW>;
-			bus-width = <4>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
deleted file mode 100644
index bf6a03506b45..000000000000
--- a/arch/arm/boot/dts/qcom-apq8084.dtsi
+++ /dev/null
@@ -1,531 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/qcom,gcc-apq8084.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "Qualcomm APQ 8084";
-	compatible = "qcom,apq8084";
-	interrupt-parent = <&intc>;
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		smem_mem: smem_region@fa00000 {
-			reg = <0xfa00000 0x200000>;
-			no-map;
-		};
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "qcom,krait";
-			reg = <0>;
-			enable-method = "qcom,kpss-acc-v2";
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc0>;
-			qcom,saw = <&saw0>;
-			cpu-idle-states = <&CPU_SPC>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "qcom,krait";
-			reg = <1>;
-			enable-method = "qcom,kpss-acc-v2";
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc1>;
-			qcom,saw = <&saw1>;
-			cpu-idle-states = <&CPU_SPC>;
-		};
-
-		cpu@2 {
-			device_type = "cpu";
-			compatible = "qcom,krait";
-			reg = <2>;
-			enable-method = "qcom,kpss-acc-v2";
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc2>;
-			qcom,saw = <&saw2>;
-			cpu-idle-states = <&CPU_SPC>;
-		};
-
-		cpu@3 {
-			device_type = "cpu";
-			compatible = "qcom,krait";
-			reg = <3>;
-			enable-method = "qcom,kpss-acc-v2";
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc3>;
-			qcom,saw = <&saw3>;
-			cpu-idle-states = <&CPU_SPC>;
-		};
-
-		L2: l2-cache {
-			compatible = "qcom,arch-cache";
-			cache-level = <2>;
-			qcom,saw = <&saw_l2>;
-		};
-
-		idle-states {
-			CPU_SPC: spc {
-				compatible = "qcom,idle-state-spc",
-						"arm,idle-state";
-				entry-latency-us = <150>;
-				exit-latency-us = <200>;
-				min-residency-us = <2000>;
-			};
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x0>;
-	};
-
-	firmware {
-		scm {
-			compatible = "qcom,scm";
-			clocks = <&gcc GCC_CE1_CLK> , <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
-			clock-names = "core", "bus", "iface";
-		};
-	};
-
-	thermal-zones {
-		cpu-thermal0 {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 5>;
-
-			trips {
-				cpu_alert0: trip0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu_crit0: trip1 {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		cpu-thermal1 {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 6>;
-
-			trips {
-				cpu_alert1: trip0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu_crit1: trip1 {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		cpu-thermal2 {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 7>;
-
-			trips {
-				cpu_alert2: trip0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu_crit2: trip1 {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		cpu-thermal3 {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 8>;
-
-			trips {
-				cpu_alert3: trip0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu_crit3: trip1 {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-	};
-
-	cpu-pmu {
-		compatible = "qcom,krait-pmu";
-		interrupts = <GIC_PPI 7 0xf04>;
-	};
-
-	clocks {
-		xo_board: xo_board {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <19200000>;
-		};
-
-		sleep_clk: sleep_clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 2 0xf08>,
-			     <GIC_PPI 3 0xf08>,
-			     <GIC_PPI 4 0xf08>,
-			     <GIC_PPI 1 0xf08>;
-		clock-frequency = <19200000>;
-	};
-
-	smem {
-		compatible = "qcom,smem";
-
-		qcom,rpm-msg-ram = <&rpm_msg_ram>;
-		memory-region = <&smem_mem>;
-
-		hwlocks = <&tcsr_mutex 3>;
-	};
-
-	soc: soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		compatible = "simple-bus";
-
-		intc: interrupt-controller@f9000000 {
-			compatible = "qcom,msm-qgic2";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = <0xf9000000 0x1000>,
-			      <0xf9002000 0x1000>;
-		};
-
-		apcs: syscon@f9011000 {
-			compatible = "syscon";
-			reg = <0xf9011000 0x1000>;
-		};
-
-		qfprom: qfprom@fc4bc000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "qcom,qfprom";
-			reg = <0xfc4bc000 0x1000>;
-			tsens_calib: calib@d0 {
-				reg = <0xd0 0x18>;
-			};
-			tsens_backup: backup@440 {
-				reg = <0x440 0x10>;
-			};
-		};
-
-		tsens: thermal-sensor@fc4a8000 {
-			compatible = "qcom,msm8974-tsens";
-			reg = <0xfc4a9000 0x1000>, /* TM */
-			      <0xfc4a8000 0x1000>; /* SROT */
-			nvmem-cells = <&tsens_calib>, <&tsens_backup>;
-			nvmem-cell-names = "calib", "calib_backup";
-			#qcom,sensors = <11>;
-			#thermal-sensor-cells = <1>;
-		};
-		timer@f9020000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			compatible = "arm,armv7-timer-mem";
-			reg = <0xf9020000 0x1000>;
-			clock-frequency = <19200000>;
-
-			frame@f9021000 {
-				frame-number = <0>;
-				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9021000 0x1000>,
-				      <0xf9022000 0x1000>;
-			};
-
-			frame@f9023000 {
-				frame-number = <1>;
-				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9023000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9024000 {
-				frame-number = <2>;
-				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9024000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9025000 {
-				frame-number = <3>;
-				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9025000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9026000 {
-				frame-number = <4>;
-				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9026000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9027000 {
-				frame-number = <5>;
-				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9027000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9028000 {
-				frame-number = <6>;
-				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9028000 0x1000>;
-				status = "disabled";
-			};
-		};
-
-		saw0: power-controller@f9089000 {
-			compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
-			reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
-		};
-
-		saw1: power-controller@f9099000 {
-			compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
-			reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>;
-		};
-
-		saw2: power-controller@f90a9000 {
-			compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
-			reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>;
-		};
-
-		saw3: power-controller@f90b9000 {
-			compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
-			reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>;
-		};
-
-		saw_l2: power-controller@f9012000 {
-			compatible = "qcom,saw2";
-			reg = <0xf9012000 0x1000>;
-			regulator;
-		};
-
-		acc0: clock-controller@f9088000 {
-			compatible = "qcom,kpss-acc-v2";
-			reg = <0xf9088000 0x1000>,
-			      <0xf9008000 0x1000>;
-		};
-
-		acc1: clock-controller@f9098000 {
-			compatible = "qcom,kpss-acc-v2";
-			reg = <0xf9098000 0x1000>,
-			      <0xf9008000 0x1000>;
-		};
-
-		acc2: clock-controller@f90a8000 {
-			compatible = "qcom,kpss-acc-v2";
-			reg = <0xf90a8000 0x1000>,
-			      <0xf9008000 0x1000>;
-		};
-
-		acc3: clock-controller@f90b8000 {
-			compatible = "qcom,kpss-acc-v2";
-			reg = <0xf90b8000 0x1000>,
-			      <0xf9008000 0x1000>;
-		};
-
-		restart@fc4ab000 {
-			compatible = "qcom,pshold";
-			reg = <0xfc4ab000 0x4>;
-		};
-
-		gcc: clock-controller@fc400000 {
-			compatible = "qcom,gcc-apq8084";
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-			reg = <0xfc400000 0x4000>;
-		};
-
-		tcsr_mutex_regs: syscon@fd484000 {
-			compatible = "syscon";
-			reg = <0xfd484000 0x2000>;
-		};
-
-		tcsr_mutex: hwlock {
-			compatible = "qcom,tcsr-mutex";
-			syscon = <&tcsr_mutex_regs 0 0x80>;
-			#hwlock-cells = <1>;
-		};
-
-		rpm_msg_ram: memory@fc428000 {
-			compatible = "qcom,rpm-msg-ram";
-			reg = <0xfc428000 0x4000>;
-		};
-
-		tlmm: pinctrl@fd510000 {
-			compatible = "qcom,apq8084-pinctrl";
-			reg = <0xfd510000 0x4000>;
-			gpio-controller;
-			gpio-ranges = <&tlmm 0 0 147>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		blsp2_uart2: serial@f995e000 {
-			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-			reg = <0xf995e000 0x1000>;
-			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
-			clock-names = "core", "iface";
-			status = "disabled";
-		};
-
-		sdhci@f9824900 {
-			compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
-			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
-			reg-names = "hc_mem", "core_mem";
-			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
-				 <&gcc GCC_SDCC1_AHB_CLK>,
-				 <&xo_board>;
-			clock-names = "core", "iface", "xo";
-			status = "disabled";
-		};
-
-		sdhci@f98a4900 {
-			compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
-			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
-			reg-names = "hc_mem", "core_mem";
-			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC2_APPS_CLK>,
-				 <&gcc GCC_SDCC2_AHB_CLK>,
-				 <&xo_board>;
-			clock-names = "core", "iface", "xo";
-			status = "disabled";
-		};
-
-		spmi_bus: spmi@fc4cf000 {
-			compatible = "qcom,spmi-pmic-arb";
-			reg-names = "core", "intr", "cnfg";
-			reg = <0xfc4cf000 0x1000>,
-			      <0xfc4cb000 0x1000>,
-			      <0xfc4ca000 0x1000>;
-			interrupt-names = "periph_irq";
-			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,ee = <0>;
-			qcom,channel = <0>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-			interrupt-controller;
-			#interrupt-cells = <4>;
-		};
-	};
-
-	smd {
-		compatible = "qcom,smd";
-
-		rpm {
-			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
-			qcom,ipc = <&apcs 8 0>;
-			qcom,smd-edge = <15>;
-
-			rpm_requests {
-				compatible = "qcom,rpm-apq8084";
-				qcom,smd-channels = "rpm_requests";
-
-				pma8084-regulators {
-					compatible = "qcom,rpm-pma8084-regulators";
-
-					pma8084_s1: s1 {};
-					pma8084_s2: s2 {};
-					pma8084_s3: s3 {};
-					pma8084_s4: s4 {};
-					pma8084_s5: s5 {};
-					pma8084_s6: s6 {};
-					pma8084_s7: s7 {};
-					pma8084_s8: s8 {};
-					pma8084_s9: s9 {};
-					pma8084_s10: s10 {};
-					pma8084_s11: s11 {};
-					pma8084_s12: s12 {};
-
-					pma8084_l1: l1 {};
-					pma8084_l2: l2 {};
-					pma8084_l3: l3 {};
-					pma8084_l4: l4 {};
-					pma8084_l5: l5 {};
-					pma8084_l6: l6 {};
-					pma8084_l7: l7 {};
-					pma8084_l8: l8 {};
-					pma8084_l9: l9 {};
-					pma8084_l10: l10 {};
-					pma8084_l11: l11 {};
-					pma8084_l12: l12 {};
-					pma8084_l13: l13 {};
-					pma8084_l14: l14 {};
-					pma8084_l15: l15 {};
-					pma8084_l16: l16 {};
-					pma8084_l17: l17 {};
-					pma8084_l18: l18 {};
-					pma8084_l19: l19 {};
-					pma8084_l20: l20 {};
-					pma8084_l21: l21 {};
-					pma8084_l22: l22 {};
-					pma8084_l23: l23 {};
-					pma8084_l24: l24 {};
-					pma8084_l25: l25 {};
-					pma8084_l26: l26 {};
-					pma8084_l27: l27 {};
-
-					pma8084_lvs1: lvs1 {};
-					pma8084_lvs2: lvs2 {};
-					pma8084_lvs3: lvs3 {};
-					pma8084_lvs4: lvs4 {};
-
-					pma8084_5vs1: 5vs1 {};
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts
deleted file mode 100644
index 028ac8e24797..000000000000
--- a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts
+++ /dev/null
@@ -1,28 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4018-ap120c-ac.dtsi"
-
-/ {
-	model = "ALFA Network AP120C-AC Bit";
-
-	leds {
-		compatible = "gpio-leds";
-
-		power {
-			label = "ap120c-ac:green:power";
-			gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-
-		wlan {
-			label = "ap120c-ac:green:wlan";
-			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
-		};
-
-		support {
-			label = "ap120c-ac:green:support";
-			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
-			panic-indicator;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
deleted file mode 100644
index b7916fc26d68..000000000000
--- a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
+++ /dev/null
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4018-ap120c-ac.dtsi"
-
-/ {
-	leds {
-		compatible = "gpio-leds";
-
-		status: status {
-			label = "ap120c-ac:blue:status";
-			gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-
-		wlan2g {
-			label = "ap120c-ac:green:wlan2g";
-			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "phy0tpt";
-		};
-
-		wlan5g {
-			label = "ap120c-ac:red:wlan5g";
-			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "phy1tpt";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
deleted file mode 100644
index c93b2164db44..000000000000
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
+++ /dev/null
@@ -1,113 +0,0 @@
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-
-/ {
-	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1";
-	compatible = "qcom,ipq4019";
-
-	aliases {
-		serial0 = &blsp1_uart1;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		pinctrl@1000000 {
-			serial_pins: serial_pinmux {
-				mux {
-					pins = "gpio60", "gpio61";
-					function = "blsp_uart0";
-					bias-disable;
-				};
-			};
-
-			spi_0_pins: spi_0_pinmux {
-				pinmux {
-					function = "blsp_spi0";
-					pins = "gpio55", "gpio56", "gpio57";
-				};
-				pinmux_cs {
-					function = "gpio";
-					pins = "gpio54";
-				};
-				pinconf {
-					pins = "gpio55", "gpio56", "gpio57";
-					drive-strength = <12>;
-					bias-disable;
-				};
-				pinconf_cs {
-					pins = "gpio54";
-					drive-strength = <2>;
-					bias-disable;
-					output-high;
-				};
-			};
-		};
-
-		blsp_dma: dma@7884000 {
-			status = "okay";
-		};
-
-		spi@78b5000 {
-			pinctrl-0 = <&spi_0_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-			cs-gpios = <&tlmm 54 0>;
-
-			mx25l25635e@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0>;
-				compatible = "mx25l25635e";
-				spi-max-frequency = <24000000>;
-			};
-		};
-
-		serial@78af000 {
-			pinctrl-0 = <&serial_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-
-		cryptobam: dma@8e04000 {
-			status = "okay";
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		wifi@a000000 {
-			status = "okay";
-		};
-
-		wifi@a800000 {
-			status = "okay";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
deleted file mode 100644
index b0f476ff017f..000000000000
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (c) 2018, The Linux Foundation. All rights reserved.
-
-#include "qcom-ipq4019-ap.dk04.1.dtsi"
-
-/ {
-	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1-C1";
-	compatible = "qcom,ipq4019-dk04.1-c1";
-
-	soc {
-		dma@7984000 {
-			status = "okay";
-		};
-
-		qpic-nand@79b0000 {
-			status = "okay";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
deleted file mode 100644
index f343a2244386..000000000000
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
+++ /dev/null
@@ -1,64 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (c) 2018, The Linux Foundation. All rights reserved.
-
-#include "qcom-ipq4019-ap.dk07.1.dtsi"
-
-/ {
-	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1-C1";
-	compatible = "qcom,ipq4019-ap-dk07.1-c1";
-
-	soc {
-		pci@40000000 {
-			status = "okay";
-			perst-gpio = <&tlmm 38 0x1>;
-		};
-
-		spi@78b6000 {
-			status = "okay";
-		};
-
-		pinctrl@1000000 {
-			serial_1_pins: serial1-pinmux {
-				pins = "gpio8", "gpio9",
-					"gpio10", "gpio11";
-				function = "blsp_uart1";
-				bias-disable;
-			};
-
-			spi_0_pins: spi-0-pinmux {
-				pinmux {
-					function = "blsp_spi0";
-					pins = "gpio13", "gpio14", "gpio15";
-					bias-disable;
-				};
-				pinmux_cs {
-					function = "gpio";
-					pins = "gpio12";
-					bias-disable;
-					output-high;
-				};
-			};
-		};
-
-		serial@78b0000 {
-			pinctrl-0 = <&serial_1_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-
-		spi@78b5000 {
-			pinctrl-0 = <&spi_0_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-			cs-gpios = <&tlmm 12 0>;
-
-			m25p80@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0>;
-				compatible = "n25q128a11";
-				spi-max-frequency = <24000000>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
deleted file mode 100644
index e5b9b9cf6097..000000000000
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-ipq8064-v1.0.dtsi"
-
-/ {
-	model = "Qualcomm Technologies, Inc. IPQ8064/AP-148";
-	compatible = "qcom,ipq8064-ap148";
-
-	soc {
-		pinmux@800000 {
-			i2c4_pins: i2c4_pinmux {
-				pins = "gpio12", "gpio13";
-				function = "gsbi4";
-				bias-disable;
-			};
-
-			buttons_pins: buttons_pins {
-				mux {
-					pins = "gpio54", "gpio65";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
-			};
-		};
-
-		gsbi@16300000 {
-			i2c@16380000 {
-				status = "okay";
-				clock-frequency = <200000>;
-				pinctrl-0 = <&i2c4_pins>;
-				pinctrl-names = "default";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
deleted file mode 100644
index f7ea2e5dd191..000000000000
--- a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
+++ /dev/null
@@ -1,366 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-ipq8064.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "MikroTik RB3011UiAS-RM";
-	compatible = "mikrotik,rb3011";
-
-	aliases {
-		serial0 = &gsbi7_serial;
-		ethernet0 = &gmac0;
-		ethernet1 = &gmac3;
-		mdio-gpio0 = &mdio0;
-		mdio-gpio1 = &mdio1;
-	};
-
-	chosen {
-		bootargs = "loglevel=8 console=ttyMSM0,115200";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		reg = <0x42000000 0x3e000000>;
-		device_type = "memory";
-	};
-
-	mdio0: mdio@0 {
-		status = "okay";
-		compatible = "virtual,mdio-gpio";
-		gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
-			<&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pinctrl-0 = <&mdio0_pins>;
-		pinctrl-names = "default";
-
-		switch0: switch@10 {
-			compatible = "qca,qca8337";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			dsa,member = <0 0>;
-
-			pinctrl-0 = <&sw0_reset_pin>;
-			pinctrl-names = "default";
-
-			reset-gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
-			reg = <0x10>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				switch0cpu: port@0 {
-					reg = <0>;
-					label = "cpu";
-					ethernet = <&gmac0>;
-					phy-mode = "rgmii-id";
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-					label = "sw1";
-				};
-
-				port@2 {
-					reg = <2>;
-					label = "sw2";
-				};
-
-				port@3 {
-					reg = <3>;
-					label = "sw3";
-				};
-
-				port@4 {
-					reg = <4>;
-					label = "sw4";
-				};
-
-				port@5 {
-					reg = <5>;
-					label = "sw5";
-				};
-			};
-		};
-	};
-
-	mdio1: mdio@1 {
-		status = "okay";
-		compatible = "virtual,mdio-gpio";
-		gpios = <&qcom_pinmux 11 GPIO_ACTIVE_HIGH>,
-			<&qcom_pinmux 10 GPIO_ACTIVE_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pinctrl-0 = <&mdio1_pins>;
-		pinctrl-names = "default";
-
-		switch1: switch@14 {
-			compatible = "qca,qca8337";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			dsa,member = <1 0>;
-
-			pinctrl-0 = <&sw1_reset_pin>;
-			pinctrl-names = "default";
-
-			reset-gpios = <&qcom_pinmux 17 GPIO_ACTIVE_LOW>;
-			reg = <0x10>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				switch1cpu: port@0 {
-					reg = <0>;
-					label = "cpu";
-					ethernet = <&gmac3>;
-					phy-mode = "sgmii";
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-					label = "sw6";
-				};
-
-				port@2 {
-					reg = <2>;
-					label = "sw7";
-				};
-
-				port@3 {
-					reg = <3>;
-					label = "sw8";
-				};
-
-				port@4 {
-					reg = <4>;
-					label = "sw9";
-				};
-
-				port@5 {
-					reg = <5>;
-					label = "sw10";
-				};
-			};
-		};
-	};
-
-	soc {
-		gsbi5: gsbi@1a200000 {
-			qcom,mode = <GSBI_PROT_SPI>;
-			status = "okay";
-
-			spi4: spi@1a280000 {
-				status = "okay";
-				spi-max-frequency = <50000000>;
-
-				pinctrl-0 = <&spi_pins>;
-				pinctrl-names = "default";
-
-				cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
-
-				norflash: s25fl016k@0 {
-					compatible = "jedec,spi-nor";
-					#address-cells = <1>;
-					#size-cells = <1>;
-					spi-max-frequency = <50000000>;
-					reg = <0>;
-
-					partition@0 {
-						label = "RouterBoot";
-						reg = <0x0 0x40000>;
-					};
-				};
-			};
-		};
-
-		gpio_keys {
-			compatible = "gpio-keys";
-			pinctrl-0 = <&buttons_pins>;
-			pinctrl-names = "default";
-
-			button@1 {
-				label = "reset";
-				linux,code = <KEY_RESTART>;
-				gpios = <&qcom_pinmux 66 GPIO_ACTIVE_LOW>;
-				linux,input-type = <1>;
-				debounce-interval = <60>;
-			};
-		};
-
-		leds {
-			compatible = "gpio-leds";
-			pinctrl-0 = <&leds_pins>;
-			pinctrl-names = "default";
-
-			led@7 {
-				label = "rb3011:green:user";
-				gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>;
-				default-state = "off";
-			};
-		};
-
-	};
-};
-
-&adm_dma {
-	status = "okay";
-};
-
-&gmac0 {
-	status = "okay";
-
-	phy-mode = "rgmii";
-	qcom,id = <0>;
-	phy-handle = <&switch0cpu>;
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&gmac3 {
-	status = "okay";
-
-	phy-mode = "sgmii";
-	qcom,id = <3>;
-	phy-handle = <&switch1cpu>;
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&gsbi7 {
-	status = "okay";
-	qcom,mode = <GSBI_PROT_I2C_UART>;
-};
-
-&gsbi7_serial {
-	status = "okay";
-};
-
-&hs_phy_1 {
-	status = "okay";
-};
-
-&nand {
-	status = "okay";
-
-	nandcs@0 {
-		compatible = "qcom,nandcs";
-		reg = <0>;
-
-		nand-ecc-strength = <4>;
-		nand-bus-width = <8>;
-		nand-ecc-step-size = <512>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			boot@0 {
-				label = "RouterBoard NAND 1 Boot";
-				reg = <0x0000000 0x0800000>;
-			};
-
-			main@800000 {
-				label = "RouterBoard NAND 1 Main";
-				reg = <0x0800000 0x7800000>;
-			};
-		};
-	};
-};
-
-&qcom_pinmux {
-	buttons_pins: buttons_pins {
-		mux {
-			pins = "gpio66";
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	leds_pins: leds_pins {
-		mux {
-			pins = "gpio33";
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	mdio0_pins: mdio0_pins {
-		mux {
-			pins = "gpio0", "gpio1";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-
-	mdio1_pins: mdio1_pins {
-		mux {
-			pins = "gpio10", "gpio11";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-
-	sw0_reset_pin: sw0_reset_pin {
-		mux {
-			pins = "gpio16";
-			drive-strength = <16>;
-			function = "gpio";
-			bias-disable;
-			input-disable;
-		};
-	};
-
-	sw1_reset_pin: sw1_reset_pin {
-		mux {
-			pins = "gpio17";
-			drive-strength = <16>;
-			function = "gpio";
-			bias-disable;
-			input-disable;
-		};
-	};
-
-	usb1_pwr_en_pins: usb1_pwr_en_pins {
-		mux {
-			pins = "gpio4";
-			function = "gpio";
-			drive-strength = <16>;
-			bias-disable;
-			output-high;
-		};
-	};
-};
-
-&ss_phy_1 {
-	status = "okay";
-};
-
-&usb3_1 {
-	pinctrl-0 = <&usb1_pwr_en_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
deleted file mode 100644
index 65330065390a..000000000000
--- a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
+++ /dev/null
@@ -1,127 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-ipq8064.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Qualcomm Technologies, Inc. IPQ8064-v1.0";
-
-	aliases {
-		serial0 = &gsbi4_serial;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	soc {
-		gsbi@16300000 {
-			qcom,mode = <GSBI_PROT_I2C_UART>;
-			status = "okay";
-
-			serial@16340000 {
-				status = "okay";
-			};
-		};
-
-		gsbi5: gsbi@1a200000 {
-			qcom,mode = <GSBI_PROT_SPI>;
-			status = "okay";
-
-			spi4: spi@1a280000 {
-				status = "okay";
-				spi-max-frequency = <50000000>;
-
-				pinctrl-0 = <&spi_pins>;
-				pinctrl-names = "default";
-
-				cs-gpios = <&qcom_pinmux 20 0>;
-
-				flash: m25p80@0 {
-					compatible = "s25fl256s1";
-					#address-cells = <1>;
-					#size-cells = <1>;
-					spi-max-frequency = <50000000>;
-					reg = <0>;
-
-					partition@0 {
-						label = "rootfs";
-						reg = <0x0 0x1000000>;
-					};
-
-					partition@1 {
-						label = "scratch";
-						reg = <0x1000000 0x1000000>;
-					};
-				};
-			};
-		};
-
-		sata-phy@1b400000 {
-			status = "okay";
-		};
-
-		sata@29000000 {
-			ports-implemented = <0x1>;
-			status = "okay";
-		};
-
-		gpio_keys {
-			compatible = "gpio-keys";
-			pinctrl-0 = <&buttons_pins>;
-			pinctrl-names = "default";
-
-			button@1 {
-				label = "reset";
-				linux,code = <KEY_RESTART>;
-				gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
-				linux,input-type = <1>;
-				debounce-interval = <60>;
-			};
-			button@2 {
-				label = "wps";
-				linux,code = <KEY_WPS_BUTTON>;
-				gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-				linux,input-type = <1>;
-				debounce-interval = <60>;
-			};
-		};
-
-		leds {
-			compatible = "gpio-leds";
-			pinctrl-0 = <&leds_pins>;
-			pinctrl-names = "default";
-
-			led@7 {
-				label = "led_usb1";
-				gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
-				linux,default-trigger = "usbdev";
-				default-state = "off";
-			};
-
-			led@8 {
-				label = "led_usb3";
-				gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
-				linux,default-trigger = "usbdev";
-				default-state = "off";
-			};
-
-			led@9 {
-				label = "status_led_fail";
-				gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
-				default-state = "off";
-			};
-
-			led@26 {
-				label = "sata_led";
-				gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
-				default-state = "off";
-			};
-
-			led@53 {
-				label = "status_led_pass";
-				gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
-				default-state = "off";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
deleted file mode 100644
index 4139d3817bd6..000000000000
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ /dev/null
@@ -1,1225 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/mfd/qcom-rpm.h>
-#include <dt-bindings/clock/qcom,rpmcc.h>
-#include <dt-bindings/clock/qcom,gcc-ipq806x.h>
-#include <dt-bindings/clock/qcom,lcc-ipq806x.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/reset/qcom,gcc-ipq806x.h>
-#include <dt-bindings/soc/qcom,gsbi.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "Qualcomm IPQ8064";
-	compatible = "qcom,ipq8064";
-	interrupt-parent = <&intc>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v1";
-			device_type = "cpu";
-			reg = <0>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc0>;
-			qcom,saw = <&saw0>;
-		};
-
-		cpu1: cpu@1 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v1";
-			device_type = "cpu";
-			reg = <1>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc1>;
-			qcom,saw = <&saw1>;
-		};
-
-		L2: l2-cache {
-			compatible = "cache";
-			cache-level = <2>;
-		};
-	};
-
-	thermal-zones {
-		tsens_tz_sensor0 {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tsens 0>;
-
-			trips {
-				cpu-critical {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-
-				cpu-hot {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		tsens_tz_sensor1 {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tsens 1>;
-
-			trips {
-				cpu-critical {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-
-				cpu-hot {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		tsens_tz_sensor2 {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tsens 2>;
-
-			trips {
-				cpu-critical {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-
-				cpu-hot {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		tsens_tz_sensor3 {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tsens 3>;
-
-			trips {
-				cpu-critical {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-
-				cpu-hot {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		tsens_tz_sensor4 {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tsens 4>;
-
-			trips {
-				cpu-critical {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-
-				cpu-hot {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		tsens_tz_sensor5 {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tsens 5>;
-
-			trips {
-				cpu-critical {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-
-				cpu-hot {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		tsens_tz_sensor6 {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tsens 6>;
-
-			trips {
-				cpu-critical {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-
-				cpu-hot {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		tsens_tz_sensor7 {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tsens 7>;
-
-			trips {
-				cpu-critical {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-
-				cpu-hot {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		tsens_tz_sensor8 {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tsens 8>;
-
-			trips {
-				cpu-critical {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-
-				cpu-hot {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		tsens_tz_sensor9 {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tsens 9>;
-
-			trips {
-				cpu-critical {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-
-				cpu-hot {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		tsens_tz_sensor10 {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tsens 10>;
-
-			trips {
-				cpu-critical {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-
-				cpu-hot {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x0>;
-	};
-
-	cpu-pmu {
-		compatible = "qcom,krait-pmu";
-		interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
-					  IRQ_TYPE_LEVEL_HIGH)>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		nss@40000000 {
-			reg = <0x40000000 0x1000000>;
-			no-map;
-		};
-
-		smem: smem@41000000 {
-			reg = <0x41000000 0x200000>;
-			no-map;
-		};
-	};
-
-	clocks {
-		cxo_board {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <25000000>;
-		};
-
-		pxo_board {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <25000000>;
-		};
-
-		sleep_clk: sleep_clk {
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-			#clock-cells = <0>;
-		};
-	};
-
-	firmware {
-		scm {
-			compatible = "qcom,scm-ipq806x", "qcom,scm";
-		};
-	};
-
-	soc: soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;