summaryrefslogtreecommitdiff
path: root/tools/testing/selftests/powerpc/nx-gzip
AgeCommit message (Collapse)Author
2024-11-07selftests/powerpc: Give all tests 2 minutes timeoutMichael Ellerman
Each of the powerpc selftests runs with a timeout of 2 minutes by default (see tools/testing/selftests/powerpc/harness.c). But when tests are run with run_kselftest.sh it uses a timeout of 45 seconds, meaning some tests run OK standalone but fail when run with the test runner. So tell run_kselftest.sh to give each test 130 seconds, that should allow the tests to complete, or be killed by the powerpc test harness after 2 minutes. If for some reason the harness fails, or for the few tests that don't use the harness, the 130 second timeout should catch them if they get stuck. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://patch.msgid.link/20241106130453.1741013-2-mpe@ellerman.id.au
2024-04-29selftests/powerpc: make sub-folders buildable on their ownMadhavan Srinivasan
Build breaks when executing make with run_tests for sub-folders under powerpc. This is because, CFLAGS and GIT_VERSION macros are defined in Makefile of toplevel powerpc folder. make: Entering directory '/home/maddy/linux/tools/testing/selftests/powerpc/mm' gcc hugetlb_vs_thp_test.c ../harness.c ../utils.c -o /home/maddy/selftest_output//hugetlb_vs_thp_test hugetlb_vs_thp_test.c:6:10: fatal error: utils.h: No such file or directory 6 | #include "utils.h" | ^~~~~~~~~ compilation terminated. Fix this by adding the flags.mk in each sub-folder Makefile. Also remove the CFLAGS and GIT_VERSION macros from powerpc/ folder Makefile since the same is definied in flags.mk Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240229093711.581230-3-maddy@linux.ibm.com
2024-04-29selftests/powerpc: Re-order *FLAGS to follow lib.mkMadhavan Srinivasan
In some powerpc/ sub-folder Makefiles, CFLAGS are defined before lib.mk include. Clean it up by re-ordering the flags to follow after the mk include. This is needed to support sub-folders in powerpc/ buildable on its own. Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240229093711.581230-1-maddy@linux.ibm.com
2023-02-09selftests/powerpc: Add automatically allocating read_fileBenjamin Gray
A couple of tests roll their own auto-allocating file read logic. Add a generic implementation and convert them to use it. Signed-off-by: Benjamin Gray <bgray@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20230203003947.38033-6-bgray@linux.ibm.com
2023-02-09selftests/powerpc: Add generic read/write file utilBenjamin Gray
File read/write is reimplemented in about 5 different ways in the various PowerPC selftests. This indicates it should be a common util. Add a common read_file / write_file implementation and convert users to it where (easily) possible. Signed-off-by: Benjamin Gray <bgray@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20230203003947.38033-2-bgray@linux.ibm.com
2021-06-25selftests/powerpc: Use req_max_processed_len from sysfs NX capabilitiesHaren Myneni
On PowerVM, the hypervisor defines the maximum buffer length for each NX request and the kernel exported this value via sysfs. This patch reads this value if the sysfs entry is available and is used to limit the request length. Signed-off-by: Haren Myneni <haren@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/ed908341b1eb7ca0183c028a4ed4a0cf48bfe0f6.camel@linux.ibm.com
2021-04-23selftests/powerpc: remove unneeded semicolonYang Li
Eliminate the following coccicheck warning: ./tools/testing/selftests/powerpc/nx-gzip/gzfht_test.c:327:4-5: Unneeded semicolon Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1612780870-95890-1-git-send-email-yang.lee@linux.alibaba.com
2020-12-04selftests/powerpc: update .gitignoreDaniel Axtens
I did an in-place build of the self-tests and found that it left the tree dirty. Add missed test binaries to .gitignore Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201201144427.1228745-1-dja@axtens.net
2020-07-15selftests/powerpc: Use proper error code to check fault addressHaren Myneni
ERR_NX_TRANSLATION(CSB.CC=5) is for internal to VAS for fault handling and should not used by OS. ERR_NX_AT_FAULT(CSB.CC=250) is the proper error code should be reported by OS when NX encounters address translation failure. This patch uses CC=250 to determine the fault address when the request is not successful. Signed-off-by: Haren Myneni <haren@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/0315251705baff94f678c33178491b5008723511.camel@linux.ibm.com
2020-04-21selftests/powerpc: Add README for GZIP engine testsRaphael Moreira Zinsly
Include a README file with the instructions to use the testcases at selftests/powerpc/nx-gzip. Signed-off-by: Bulent Abali <abali@us.ibm.com> Signed-off-by: Raphael Moreira Zinsly <rzinsly@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200420205538.25181-6-rzinsly@linux.ibm.com
2020-04-21selftests/powerpc: Add NX-GZIP engine decompress testcaseRaphael Moreira Zinsly
Include a decompression testcase for the powerpc NX-GZIP engine. Signed-off-by: Bulent Abali <abali@us.ibm.com> Signed-off-by: Raphael Moreira Zinsly <rzinsly@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200420205538.25181-5-rzinsly@linux.ibm.com
2020-04-21selftests/powerpc: Add NX-GZIP engine compress testcaseRaphael Moreira Zinsly
Add a compression testcase for the powerpc NX-GZIP engine. Signed-off-by: Bulent Abali <abali@us.ibm.com> Signed-off-by: Raphael Moreira Zinsly <rzinsly@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200420205538.25181-4-rzinsly@linux.ibm.com
2020-04-21selftests/powerpc: Add header files for NX compresion/decompressionRaphael Moreira Zinsly
Add files to be able to compress and decompress files using the powerpc NX-GZIP engine. Signed-off-by: Bulent Abali <abali@us.ibm.com> Signed-off-by: Raphael Moreira Zinsly <rzinsly@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200420205538.25181-3-rzinsly@linux.ibm.com
2020-04-21selftests/powerpc: Add header files for GZIP engine testRaphael Moreira Zinsly
Add files to access the powerpc NX-GZIP engine in user space. Signed-off-by: Bulent Abali <abali@us.ibm.com> Signed-off-by: Raphael Moreira Zinsly <rzinsly@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200420205538.25181-2-rzinsly@linux.ibm.com
generated by cgit (git 2.34.1) at 2025-07-17 22:29:28 +0000